From 15c73aaa44e09222e9cccaa9f80e29f7f5351f2b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 2 Oct 2008 19:47:12 +0900 Subject: serial: sh-sci: Kill off all of the SCI/SCIF special casing. This was added at a time when the compiler did a less than stellar job of optimizing out dead code. These days this tends to be less of a concern, so kill it all off. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 17 +--------- drivers/serial/sh-sci.h | 82 +++++++++---------------------------------------- 2 files changed, 16 insertions(+), 83 deletions(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 3b9d2d83b590..6a5132f84036 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -250,8 +250,7 @@ static inline void h8300_sci_disable(struct uart_port *port) } #endif -#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \ - defined(__H8300H__) || defined(__H8300S__) +#if defined(__H8300H__) || defined(__H8300S__) static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag) { int ch = (port->mapbase - SMR0) >> 3; @@ -285,11 +284,6 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) #define sci_init_pins_irda NULL #endif -#ifdef SCI_ONLY -#define sci_init_pins_scif NULL -#endif - -#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag) { @@ -449,7 +443,6 @@ static inline int scif_rxroom(struct uart_port *port) return sci_in(port, SCFDR) & SCIF_RFDC_MASK; } #endif -#endif /* SCIF_ONLY || SCI_AND_SCIF */ static inline int sci_txroom(struct uart_port *port) { @@ -485,11 +478,9 @@ static void sci_transmit_chars(struct uart_port *port) return; } -#ifndef SCI_ONLY if (port->type == PORT_SCIF) count = scif_txroom(port); else -#endif count = sci_txroom(port); do { @@ -519,12 +510,10 @@ static void sci_transmit_chars(struct uart_port *port) } else { ctrl = sci_in(port, SCSCR); -#if !defined(SCI_ONLY) if (port->type == PORT_SCIF) { sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } -#endif ctrl |= SCI_CTRL_FLAGS_TIE; sci_out(port, SCSCR, ctrl); @@ -547,11 +536,9 @@ static inline void sci_receive_chars(struct uart_port *port) return; while (1) { -#if !defined(SCI_ONLY) if (port->type == PORT_SCIF) count = scif_rxroom(port); else -#endif count = sci_rxroom(port); /* Don't copy more bytes than there is room for in the buffer */ @@ -1054,10 +1041,8 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ -#if !defined(SCI_ONLY) if (port->type == PORT_SCIF) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); -#endif smr_val = sci_in(port, SCSMR) & 3; if ((termios->c_cflag & CSIZE) == CS7) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 511c10d42187..43c09a862213 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -16,7 +16,6 @@ # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_AND_SCIF #elif defined(CONFIG_CPU_SUBTYPE_SH7705) # define SCIF0 0xA4400000 # define SCIF2 0xA4410000 @@ -30,17 +29,14 @@ * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output */ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCIF_ONLY #define SCIF_ORER 0x0200 /* overrun error bit */ #elif defined(CONFIG_SH_RTS7751R2D) # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ @@ -53,28 +49,24 @@ # define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) -# define SCI_AND_SCIF #elif defined(CONFIG_CPU_SUBTYPE_SH7760) # define SCSPTR0 0xfe600024 /* 16 bit SCIF */ # define SCSPTR1 0xfe610024 /* 16 bit SCIF */ # define SCSPTR2 0xfe620024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define PACR 0xa4050100 # define PBCR 0xa4050102 # define SCSCR_INIT(port) 0x3B -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7343) # define SCSPTR0 0xffe00010 /* 16 bit SCIF */ # define SCSPTR1 0xffe10010 /* 16 bit SCIF */ # define SCSPTR2 0xffe20010 /* 16 bit SCIF */ # define SCSPTR3 0xffe30010 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7722) # define PADR 0xA4050120 # define PSDR 0xA405013e @@ -82,7 +74,6 @@ # define PSCR 0xA405011E # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7366) # define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ # define SCSPTR0 SCPDR0 @@ -97,12 +88,10 @@ # define SCSPTR5 0xa4050128 # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) # define SCIF_BASE_ADDR 0x01030000 # define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR @@ -111,14 +100,11 @@ # define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ # define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_H83007) || defined(CONFIG_H83068) # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_ONLY # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_H8S2678) # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_ONLY # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ @@ -126,20 +112,17 @@ # define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ # define SCSPTR1 0xff924020 /* 16 bit SCIF */ # define SCSPTR2 0xff925020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe10024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7785) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ # define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ @@ -149,7 +132,6 @@ # define SCSPTR5 0xffef0024 /* 16 bit SCIF */ # define SCIF_OPER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ defined(CONFIG_CPU_SUBTYPE_SH7206) || \ defined(CONFIG_CPU_SUBTYPE_SH7263) @@ -158,14 +140,12 @@ # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ # define SCSPTR3 0xfffe9820 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7619) # define SCSPTR0 0xf8400020 /* 16 bit SCIF */ # define SCSPTR1 0xf8410020 /* 16 bit SCIF */ # define SCSPTR2 0xf8420020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SHX3) # define SCSPTR0 0xffc30020 /* 16 bit SCIF */ # define SCSPTR1 0xffc40020 /* 16 bit SCIF */ @@ -173,7 +153,6 @@ # define SCSPTR3 0xffc60020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #else # error CPU subtype not defined #endif @@ -244,55 +223,28 @@ # define SCIF_TXROOM_MAX 16 #endif -#if defined(SCI_ONLY) -# define SCxSR_TEND(port) SCI_TEND -# define SCxSR_ERRORS(port) SCI_ERRORS -# define SCxSR_RDxF(port) SCI_RDRF -# define SCxSR_TDxE(port) SCI_TDRE -# define SCxSR_ORER(port) SCI_ORER -# define SCxSR_FER(port) SCI_FER -# define SCxSR_PER(port) SCI_PER -# define SCxSR_BRK(port) 0x00 -# define SCxSR_RDxF_CLEAR(port) 0xbc -# define SCxSR_ERROR_CLEAR(port) 0xc4 -# define SCxSR_TDxE_CLEAR(port) 0x78 -# define SCxSR_BREAK_CLEAR(port) 0xc4 -#elif defined(SCIF_ONLY) -# define SCxSR_TEND(port) SCIF_TEND -# define SCxSR_ERRORS(port) SCIF_ERRORS -# define SCxSR_RDxF(port) SCIF_RDF -# define SCxSR_TDxE(port) SCIF_TDFE +#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) +#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) +#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) +#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) +#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) +#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) +#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) + #if defined(CONFIG_CPU_SUBTYPE_SH7705) -# define SCxSR_ORER(port) SCIF_ORER +# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) #else -# define SCxSR_ORER(port) 0x0000 +# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000) #endif -# define SCxSR_FER(port) SCIF_FER -# define SCxSR_PER(port) SCIF_PER -# define SCxSR_BRK(port) SCIF_BRK + #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) -# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc) -# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73) -# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf) -# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3) -#else -/* SH7705 can also use this, clearing is same between 7705 and 7709 */ -# define SCxSR_RDxF_CLEAR(port) 0x00fc -# define SCxSR_ERROR_CLEAR(port) 0x0073 -# define SCxSR_TDxE_CLEAR(port) 0x00df -# define SCxSR_BREAK_CLEAR(port) 0x00e3 -#endif +# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) +# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) +# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) +# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3) #else -# define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) -# define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) -# define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) -# define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) -# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000) -# define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) -# define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) -# define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) # define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) # define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) # define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) @@ -578,14 +530,10 @@ static inline int sci_rxd_in(struct uart_port *port) defined(CONFIG_CPU_SUBTYPE_SH4_202) static inline int sci_rxd_in(struct uart_port *port) { -#ifndef SCIF_ONLY if (port->mapbase == 0xffe00000) return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ -#endif -#ifndef SCI_ONLY if (port->mapbase == 0xffe80000) return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ -#endif return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7760) -- cgit v1.2.3 From 0f0254fa8ddce39ce4e98113e7050e1cd88ff884 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Tue, 21 Oct 2008 06:33:42 +0800 Subject: [MTD] [NAND] OMAP2: remove duplicated #include Removed duplicated #include in drivers/mtd/onenand/omap2.c. Signed-off-by: Huang Weiyi Signed-off-by: David Woodhouse --- drivers/mtd/onenand/omap2.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 8387e05daae2..e39b21d3e168 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From f04de505e3fa322728d1a851e08bf7060b117743 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Tue, 21 Oct 2008 13:25:51 +0100 Subject: [JFFS2] Fix build failure with !CONFIG_JFFS2_FS_WRITEBUFFER Build failure introduced by 5bf1723723487ddb0b9c9641b6559da96b27cc93 [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash Signed-off-by: Steve Glendinning Signed-off-by: David Woodhouse --- fs/jffs2/nodemgmt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c index 0875b60b4bf7..21a052915aa9 100644 --- a/fs/jffs2/nodemgmt.c +++ b/fs/jffs2/nodemgmt.c @@ -261,9 +261,11 @@ static int jffs2_find_nextblock(struct jffs2_sb_info *c) jffs2_sum_reset_collected(c->summary); /* reset collected summary */ +#ifdef CONFIG_JFFS2_FS_WRITEBUFFER /* adjust write buffer offset, else we get a non contiguous write bug */ if (!(c->wbuf_ofs % c->sector_size) && !c->wbuf_len) c->wbuf_ofs = 0xffffffff; +#endif D1(printk(KERN_DEBUG "jffs2_find_nextblock(): new nextblock = 0x%08x\n", c->nextblock->offset)); -- cgit v1.2.3 From a54373eee6e9f5e986a251e852ee1bb83e03671b Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Thu, 23 Oct 2008 16:44:29 +0200 Subject: [CRISv32] Remove warning in io.h Variable flags need to be unsigned. Signed-off-by: Jesper Nilsson --- include/asm-cris/arch-v32/io.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-cris/arch-v32/io.h b/include/asm-cris/arch-v32/io.h index 6b38912f29ba..72024452cea9 100644 --- a/include/asm-cris/arch-v32/io.h +++ b/include/asm-cris/arch-v32/io.h @@ -43,7 +43,7 @@ extern struct crisv32_iopin crisv32_led_net1_red; static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val) { - long flags; + unsigned long flags; spin_lock_irqsave(&iopin->port->lock, flags); if (val) @@ -57,7 +57,7 @@ static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val) static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin, enum crisv32_io_dir dir) { - long flags; + unsigned long flags; spin_lock_irqsave(&iopin->port->lock, flags); if (dir == crisv32_io_dir_in) -- cgit v1.2.3 From 2a88b6e81589b1d064e03db066feaaa58f6a2d13 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Oct 2008 14:30:51 +0900 Subject: sh: oprofile: Fix up the SH7750 performance counter name. Rather than varying this on a subtype level, we use the counter type as a generic identifier. This simplifies logic in the userspace tools where no fundamental difference exists across the various subtypes. Signed-off-by: Paul Mundt --- arch/sh/oprofile/op_model_sh7750.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c index 6b9a98e07004..008b3b03750a 100644 --- a/arch/sh/oprofile/op_model_sh7750.c +++ b/arch/sh/oprofile/op_model_sh7750.c @@ -255,10 +255,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) return -ENODEV; ops = &sh7750_perf_counter_ops; - ops->cpu_type = (char *)get_cpu_subtype(¤t_cpu_data); + ops->cpu_type = "sh/sh7750"; - printk(KERN_INFO "oprofile: using SH-4 (%s) performance monitoring.\n", - sh7750_perf_counter_ops.cpu_type); + printk(KERN_INFO "oprofile: using SH-4 performance monitoring.\n"); /* Clear the counters */ ctrl_outw(ctrl_inw(PMCR1) | PMCR_PMCLR, PMCR1); @@ -270,4 +269,3 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) void oprofile_arch_exit(void) { } - -- cgit v1.2.3 From 6a0bfff44e4aa4ee1721b3daa004d2039576c70d Mon Sep 17 00:00:00 2001 From: Tim Pepper Date: Mon, 27 Oct 2008 12:18:36 +0800 Subject: Blackfin arch: handle case of d_path() returning error in decode_address() d_path() can return an error. Most of its callers do something or other to make up something sane in that case. Do similar for blackfin's decode_address() call to d_path(). Signed-off-by: Tim Pepper Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 1aa2c788e228..0003616d02a2 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -147,9 +147,12 @@ static void decode_address(char *buf, unsigned long address) char *name = p->comm; struct file *file = vma->vm_file; - if (file) - name = d_path(&file->f_path, _tmpbuf, + if (file) { + char *d_name = d_path(&file->f_path, _tmpbuf, sizeof(_tmpbuf)); + if (!IS_ERR(d_name)) + name = d_name; + } /* FLAT does not have its text aligned to the start of * the map while FDPIC ELF does ... -- cgit v1.2.3 From 6776cf4476833df0f1e96bd9dba18c1ea4f582d5 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Mon, 27 Oct 2008 18:12:53 +0800 Subject: Blackfin arch: fix bug - Fail to boot jffs2 kernel for BF561 with SMP patch only if the cplb block overlapped with kernel area, this cplb need be locked Signed-off-by: Graf Yang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/cplb-nompu/cplbinit.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 512f8c92ead5..2debc900e246 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -188,10 +188,11 @@ static struct cplb_desc cplb_data[] = { static u16 __init lock_kernel_check(u32 start, u32 end) { - if ((end <= (u32) _end && end >= (u32)_stext) || - (start <= (u32) _end && start >= (u32)_stext)) - return IN_KERNEL; - return 0; + if (start >= (u32)_end || end <= (u32)_stext) + return 0; + + /* This cplb block overlapped with kernel area. */ + return IN_KERNEL; } static unsigned short __init -- cgit v1.2.3 From 3b1f26a50a2bfbd2825345b49b1d7f78432a7a4c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 27 Oct 2008 18:21:43 +0800 Subject: Blackfin arch: don't copy bss when copying L1 when copying L1 regions, go to the start of bss rather than end since we have code to zero it out already Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/bfin-global.h | 2 +- arch/blackfin/kernel/setup.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index 56dcb0a2d244..77295666c34b 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -101,7 +101,7 @@ extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */ extern unsigned long _ramstart, _ramend, _rambase; extern unsigned long memory_start, memory_end, physical_mem_end; extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], - _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[], + _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[], _ebss_l2[], _l2_lma_start[]; diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 7f35d1046cd8..8337dc3a62d7 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -119,23 +119,23 @@ void __init bfin_relocate_l1_mem(void) /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */ dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length); - l1_data_a_length = _ebss_l1 - _sdata_l1; + l1_data_a_length = _sbss_l1 - _sdata_l1; if (l1_data_a_length > L1_DATA_A_LENGTH) panic("L1 Data SRAM Bank A Overflow\n"); - /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */ + /* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */ dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); - l1_data_b_length = _ebss_b_l1 - _sdata_b_l1; + l1_data_b_length = _sbss_b_l1 - _sdata_b_l1; if (l1_data_b_length > L1_DATA_B_LENGTH) panic("L1 Data SRAM Bank B Overflow\n"); - /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */ + /* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */ dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); if (L2_LENGTH != 0) { - l2_length = _ebss_l2 - _stext_l2; + l2_length = _sbss_l2 - _stext_l2; if (l2_length > L2_LENGTH) panic("L2 SRAM Overflow\n"); -- cgit v1.2.3 From ba8b453de08c18cbc2453bcabfd0936c1d6695cb Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Fri, 24 Oct 2008 15:05:12 +0200 Subject: Change UTF8 chars in Kconfig help text about Oprofile AMD barcelona Fixes screwing up text output when doing a make oldconfig and viewing help text of "OProfile AMD IBS support". When the terminal is not using an UTF8 locale / LANG. "make config" breaks terminal output and its not possible to continue. (Change added by changeset 852402cc Tue Jul 22 21:09:06 2008) Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Robert Richter --- arch/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/Kconfig b/arch/Kconfig index e6ab550bceb3..8977d99987cb 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -21,7 +21,7 @@ config OPROFILE_IBS Instruction-Based Sampling (IBS) is a new profiling technique that provides rich, precise program performance information. IBS is introduced by AMD Family10h processors - (AMD Opteron Quad-Core processor “Barcelona”) to overcome + (AMD Opteron Quad-Core processor "Barcelona") to overcome the limitations of conventional performance counter sampling. -- cgit v1.2.3 From fa448d6008cc81a3537e5db168fa0490e0caba68 Mon Sep 17 00:00:00 2001 From: Carl Love Date: Fri, 24 Oct 2008 11:47:29 -0700 Subject: Cell OProfile: Incorrect local array size in activate spu profiling function The size of the pm_signal_local array should be equal to the number of SPUs being configured in the call. Currently, the array is of size 4 (NR_PHYS_CTRS) but being indexed by a for loop from 0 to 7 (NUM_SPUS_PER_NODE). Signed-off-by: Carl Love Signed-off-by: Robert Richter --- arch/powerpc/oprofile/op_model_cell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 35141a8bc3d9..6b2d974880b6 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -830,7 +830,7 @@ static int calculate_lfsr(int n) static int pm_rtas_activate_spu_profiling(u32 node) { int ret, i; - struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; /* * Set up the rtas call to configure the debug bus to -- cgit v1.2.3 From cae042a73bb22fc4132b04ff94bd684456203089 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 23 Oct 2008 16:25:54 +0200 Subject: oprofile: fix memory ordering Regular bitops don't work as locks on all architectures. Also: can use non-atomic unlock as no concurrent stores to the word. Signed-off-by: Nick Piggin Signed-off-by: Robert Richter --- drivers/oprofile/event_buffer.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c index d962ba0dd87a..191a3202cecc 100644 --- a/drivers/oprofile/event_buffer.c +++ b/drivers/oprofile/event_buffer.c @@ -105,7 +105,7 @@ static int event_buffer_open(struct inode *inode, struct file *file) if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (test_and_set_bit(0, &buffer_opened)) + if (test_and_set_bit_lock(0, &buffer_opened)) return -EBUSY; /* Register as a user of dcookies @@ -129,7 +129,7 @@ static int event_buffer_open(struct inode *inode, struct file *file) fail: dcookie_unregister(file->private_data); out: - clear_bit(0, &buffer_opened); + __clear_bit_unlock(0, &buffer_opened); return err; } @@ -141,7 +141,7 @@ static int event_buffer_release(struct inode *inode, struct file *file) dcookie_unregister(file->private_data); buffer_pos = 0; atomic_set(&buffer_ready, 0); - clear_bit(0, &buffer_opened); + __clear_bit_unlock(0, &buffer_opened); return 0; } -- cgit v1.2.3 From 6c87df37dcb9c6c33923707fa5191e0a65874d60 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 27 Oct 2008 22:38:27 +0300 Subject: proc: revert /proc/uptime to ->read_proc hook Turned out some VMware userspace does pread(2) on /proc/uptime, but seqfiles currently don't allow pread() resulting in -ESPIPE. Seqfiles in theory can do pread(), but this can be a long story, so revert to ->read_proc until then. http://bugzilla.kernel.org/show_bug.cgi?id=11856 Signed-off-by: Alexey Dobriyan --- fs/proc/uptime.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) diff --git a/fs/proc/uptime.c b/fs/proc/uptime.c index 0c10a0b3f146..df26aa88fa47 100644 --- a/fs/proc/uptime.c +++ b/fs/proc/uptime.c @@ -1,43 +1,45 @@ -#include #include #include #include -#include #include #include -static int uptime_proc_show(struct seq_file *m, void *v) +static int proc_calc_metrics(char *page, char **start, off_t off, + int count, int *eof, int len) +{ + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + return len; +} + +static int uptime_read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) { struct timespec uptime; struct timespec idle; + int len; cputime_t idletime = cputime_add(init_task.utime, init_task.stime); do_posix_clock_monotonic_gettime(&uptime); monotonic_to_bootbased(&uptime); cputime_to_timespec(idletime, &idle); - seq_printf(m, "%lu.%02lu %lu.%02lu\n", + len = sprintf(page, "%lu.%02lu %lu.%02lu\n", (unsigned long) uptime.tv_sec, (uptime.tv_nsec / (NSEC_PER_SEC / 100)), (unsigned long) idle.tv_sec, (idle.tv_nsec / (NSEC_PER_SEC / 100))); - return 0; + return proc_calc_metrics(page, start, off, count, eof, len); } -static int uptime_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, uptime_proc_show, NULL); -} - -static const struct file_operations uptime_proc_fops = { - .open = uptime_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - static int __init proc_uptime_init(void) { - proc_create("uptime", 0, NULL, &uptime_proc_fops); + create_proc_read_entry("uptime", 0, NULL, uptime_read_proc, NULL); return 0; } module_init(proc_uptime_init); -- cgit v1.2.3 From 65e082c9a33a6e9f24e9a713a7d38d11206d3c3d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 24 Oct 2008 17:18:10 -0400 Subject: build fix: CONFIG_DRM_I915=y && CONFIG_ACPI=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/gpu/drm/i915/i915_opregion.c:340: error: implicit declaration of function ‘register_acpi_notifier’ drivers/gpu/drm/i915/i915_opregion.c:361: error: implicit declaration of function ‘unregister_acpi_notifier’ Signed-off-by: Len Brown Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/Makefile | 3 ++- drivers/gpu/drm/i915/i915_drv.h | 7 +++++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 5ba78e4fd2b5..d8fb5d8ee7ea 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -3,13 +3,14 @@ # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. ccflags-y := -Iinclude/drm -i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o i915_opregion.o \ +i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \ i915_suspend.o \ i915_gem.o \ i915_gem_debug.o \ i915_gem_proc.o \ i915_gem_tiling.o +i915-$(CONFIG_ACPI) += i915_opregion.o i915-$(CONFIG_COMPAT) += i915_ioc32.o obj-$(CONFIG_DRM_I915) += i915.o diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f20ffe17df71..901e80cf5813 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -539,11 +539,18 @@ extern int i915_restore_state(struct drm_device *dev); extern int i915_save_state(struct drm_device *dev); extern int i915_restore_state(struct drm_device *dev); +#ifdef CONFIG_ACPI /* i915_opregion.c */ extern int intel_opregion_init(struct drm_device *dev); extern void intel_opregion_free(struct drm_device *dev); extern void opregion_asle_intr(struct drm_device *dev); extern void opregion_enable_asle(struct drm_device *dev); +#else +static inline int intel_opregion_init(struct drm_device *dev) { return 0; } +static inline void intel_opregion_free(struct drm_device *dev) { return; } +static inline void opregion_asle_intr(struct drm_device *dev) { return; } +static inline void opregion_enable_asle(struct drm_device *dev) { return; } +#endif /** * Lock test for when it's just for synchronization of ring access. -- cgit v1.2.3 From 4e270e9b8a9d246290f3901f1fb6c5efdb734ddf Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 28 Oct 2008 07:48:34 +1000 Subject: drm/radeon: fixup further bus mastering confusion. rs400/480 are like previous chips not like rs6xx chips. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cp.c | 15 ++++++++------- drivers/gpu/drm/radeon/radeon_drv.h | 12 ++++++------ 2 files changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 59a2132a8f57..073894824e6b 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -653,15 +653,16 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, RADEON_WRITE(RADEON_SCRATCH_UMSK, 0x7); /* Turn on bus mastering */ - if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400) || - ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) { - /* rs400, rs690/rs740 */ - tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RS400_BUS_MASTER_DIS; + /* rs600/rs690/rs740 */ + tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS; RADEON_WRITE(RADEON_BUS_CNTL, tmp); - } else if (!(((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) || - ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R423))) { - /* r1xx, r2xx, r300, r(v)350, r420/r481, rs480 */ + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV350) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R420) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) { + /* r1xx, r2xx, r300, r(v)350, r420/r481, rs400/rs480 */ tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS; RADEON_WRITE(RADEON_BUS_CNTL, tmp); } /* PCIE cards appears to not need this */ diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 4dbb813910c3..02f5575ba395 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -447,12 +447,12 @@ extern int r300_do_cp_cmdbuf(struct drm_device *dev, * handling, not bus mastering itself. */ #define RADEON_BUS_CNTL 0x0030 -/* r1xx, r2xx, r300, r(v)350, r420/r481, rs480 */ +/* r1xx, r2xx, r300, r(v)350, r420/r481, rs400/rs480 */ # define RADEON_BUS_MASTER_DIS (1 << 6) -/* rs400, rs690/rs740 */ -# define RS400_BUS_MASTER_DIS (1 << 14) -# define RS400_MSI_REARM (1 << 20) -/* see RS480_MSI_REARM in AIC_CNTL for rs480 */ +/* rs600/rs690/rs740 */ +# define RS600_BUS_MASTER_DIS (1 << 14) +# define RS600_MSI_REARM (1 << 20) +/* see RS400_MSI_REARM in AIC_CNTL for rs480 */ #define RADEON_BUS_CNTL1 0x0034 # define RADEON_PMI_BM_DIS (1 << 2) @@ -937,7 +937,7 @@ extern int r300_do_cp_cmdbuf(struct drm_device *dev, #define RADEON_AIC_CNTL 0x01d0 # define RADEON_PCIGART_TRANSLATE_EN (1 << 0) -# define RS480_MSI_REARM (1 << 3) +# define RS400_MSI_REARM (1 << 3) #define RADEON_AIC_STAT 0x01d4 #define RADEON_AIC_PT_BASE 0x01d8 #define RADEON_AIC_LO_ADDR 0x01dc -- cgit v1.2.3 From a8b56f296d7d977fea2512e353a131f8da490aa5 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Mon, 27 Oct 2008 15:31:25 -0700 Subject: IB/ipath: Fix RDMA write with immediate copy of last packet When the last packet of a RDMA write with immediate is received, the next receive work queue entry ID should be used to generate a completion entry. The code was incorrectly resetting part of the state used to copy the last packet. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_ruc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c index fc0f6d9e6030..2296832f94da 100644 --- a/drivers/infiniband/hw/ipath/ipath_ruc.c +++ b/drivers/infiniband/hw/ipath/ipath_ruc.c @@ -156,7 +156,7 @@ bail: /** * ipath_get_rwqe - copy the next RWQE into the QP's RWQE * @qp: the QP - * @wr_id_only: update wr_id only, not SGEs + * @wr_id_only: update qp->r_wr_id only, not qp->r_sge * * Return 0 if no RWQE is available, otherwise return 1. * @@ -173,8 +173,6 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) u32 tail; int ret; - qp->r_sge.sg_list = qp->r_sg_list; - if (qp->ibqp.srq) { srq = to_isrq(qp->ibqp.srq); handler = srq->ibsrq.event_handler; @@ -206,8 +204,10 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) wqe = get_rwqe_ptr(rq, tail); if (++tail >= rq->size) tail = 0; - } while (!wr_id_only && !ipath_init_sge(qp, wqe, &qp->r_len, - &qp->r_sge)); + if (wr_id_only) + break; + qp->r_sge.sg_list = qp->r_sg_list; + } while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge)); qp->r_wr_id = wqe->wr_id; wq->tail = tail; -- cgit v1.2.3 From 44d6f78756560e95903de239e10f8a40a6eae444 Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Mon, 27 Oct 2008 22:51:46 -0400 Subject: ext3: fix a bug accessing freed memory in ext3_abort Vegard Nossum reported a bug which accesses freed memory (found via kmemcheck). When journal has been aborted, ext3_put_super() calls ext3_abort() after freeing the journal_t object, and then ext3_abort() accesses it. This patch fix it. Signed-off-by: Hidehiro Kawai Acked-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/ext3/super.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 18eaa78ecb4e..e5717a4fae67 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -281,7 +281,8 @@ void ext3_abort (struct super_block * sb, const char * function, EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; sb->s_flags |= MS_RDONLY; EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT; - journal_abort(EXT3_SB(sb)->s_journal, -EIO); + if (EXT3_SB(sb)->s_journal) + journal_abort(EXT3_SB(sb)->s_journal, -EIO); } void ext3_warning (struct super_block * sb, const char * function, @@ -390,11 +391,14 @@ static void ext3_put_super (struct super_block * sb) { struct ext3_sb_info *sbi = EXT3_SB(sb); struct ext3_super_block *es = sbi->s_es; - int i; + int i, err; ext3_xattr_put_super(sb); - if (journal_destroy(sbi->s_journal) < 0) + err = journal_destroy(sbi->s_journal); + sbi->s_journal = NULL; + if (err < 0) ext3_abort(sb, __func__, "Couldn't clean up the journal"); + if (!(sb->s_flags & MS_RDONLY)) { EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); es->s_state = cpu_to_le16(sbi->s_mount_state); -- cgit v1.2.3 From ef2cabf7c6d838eb0ee2b4fb8ef84f7c06ce16d9 Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Mon, 27 Oct 2008 22:53:05 -0400 Subject: ext4: fix a bug accessing freed memory in ext4_abort Vegard Nossum reported a bug which accesses freed memory (found via kmemcheck). When journal has been aborted, ext4_put_super() calls ext4_abort() after freeing the journal_t object, and then ext4_abort() accesses it. This patch fix it. Signed-off-by: Hidehiro Kawai Acked-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/ext4/super.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index bdddea14e782..994859df010e 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -333,7 +333,8 @@ void ext4_abort(struct super_block *sb, const char *function, EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS; sb->s_flags |= MS_RDONLY; EXT4_SB(sb)->s_mount_opt |= EXT4_MOUNT_ABORT; - jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO); + if (EXT4_SB(sb)->s_journal) + jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO); } void ext4_warning(struct super_block *sb, const char *function, @@ -442,14 +443,16 @@ static void ext4_put_super(struct super_block *sb) { struct ext4_sb_info *sbi = EXT4_SB(sb); struct ext4_super_block *es = sbi->s_es; - int i; + int i, err; ext4_mb_release(sb); ext4_ext_release(sb); ext4_xattr_put_super(sb); - if (jbd2_journal_destroy(sbi->s_journal) < 0) - ext4_abort(sb, __func__, "Couldn't clean up the journal"); + err = jbd2_journal_destroy(sbi->s_journal); sbi->s_journal = NULL; + if (err < 0) + ext4_abort(sb, __func__, "Couldn't clean up the journal"); + if (!(sb->s_flags & MS_RDONLY)) { EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER); es->s_state = cpu_to_le16(sbi->s_mount_state); -- cgit v1.2.3 From 4ee1c45337e7b529eed644c6f62399d797dcbc10 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Tue, 28 Oct 2008 11:36:11 +0800 Subject: Blackfin arch: Fix typo when adding CONFIG_DEBUG_VERBOSE Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 0003616d02a2..bef025b07443 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -59,7 +59,7 @@ #endif -#ifdef CONFIG_VERBOSE_DEBUG +#ifdef CONFIG_DEBUG_VERBOSE #define verbose_printk(fmt, arg...) \ printk(fmt, ##arg) #else @@ -574,7 +574,7 @@ asmlinkage void trap_c(struct pt_regs *fp) #endif panic("Kernel exception"); } else { -#ifdef CONFIG_VERBOSE_DEBUG +#ifdef CONFIG_DEBUG_VERBOSE unsigned long *stack; /* Dump the user space stack */ stack = (unsigned long *)rdusp(); -- cgit v1.2.3 From 6c20ec850360bc6e5c66a787f0523a80450d65ab Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 28 Oct 2008 21:08:20 -0400 Subject: jbd2: Call the commit callback before the transaction could get dropped The transaction can potentially get dropped if there are no buffers that need to be written. Make sure we call the commit callback before potentially deciding to drop the transaction. Also avoid dereferencing the commit_transaction pointer in the marker for the same reason. This patch fixes the bug reported by Eric Paris at: http://bugzilla.kernel.org/show_bug.cgi?id=11838 Signed-off-by: "Theodore Ts'o" Acked-by: Eric Sandeen Tested-by: Eric Paris --- fs/jbd2/commit.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 8b119e16aa36..ebc667bc54a8 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -974,6 +974,9 @@ restart_loop: journal->j_committing_transaction = NULL; spin_unlock(&journal->j_state_lock); + if (journal->j_commit_callback) + journal->j_commit_callback(journal, commit_transaction); + if (commit_transaction->t_checkpoint_list == NULL && commit_transaction->t_checkpoint_io_list == NULL) { __jbd2_journal_drop_transaction(journal, commit_transaction); @@ -995,11 +998,8 @@ restart_loop: } spin_unlock(&journal->j_list_lock); - if (journal->j_commit_callback) - journal->j_commit_callback(journal, commit_transaction); - trace_mark(jbd2_end_commit, "dev %s transaction %d head %d", - journal->j_devname, commit_transaction->t_tid, + journal->j_devname, journal->j_commit_sequence, journal->j_tail_sequence); jbd_debug(1, "JBD: commit %d complete, head %d\n", journal->j_commit_sequence, journal->j_tail_sequence); -- cgit v1.2.3 From 8c3bf8a01c005385e9be0bc992e10abfb355278c Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 28 Oct 2008 00:08:12 -0400 Subject: merge ext4_claim_free_blocks & ext4_has_free_blocks Mingming pointed out that ext4_claim_free_blocks & ext4_has_free_blocks are largely cut & pasted; they can be collapsed/merged as follows. Signed-off-by: Eric Sandeen Reviewed-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/balloc.c | 57 ++++++++++++++++---------------------------------------- fs/ext4/ext4.h | 3 +-- 2 files changed, 17 insertions(+), 43 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index b9821be709bd..e28203ec45bd 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -589,8 +589,15 @@ void ext4_free_blocks(handle_t *handle, struct inode *inode, return; } -int ext4_claim_free_blocks(struct ext4_sb_info *sbi, - s64 nblocks) +/** + * ext4_has_free_blocks() + * @sbi: in-core super block structure. + * @nblocks: number of needed blocks + * + * Check if filesystem has nblocks free & available for allocation. + * On success return 1, return 0 on failure. + */ +int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks) { s64 free_blocks, dirty_blocks; s64 root_blocks = 0; @@ -620,53 +627,21 @@ int ext4_claim_free_blocks(struct ext4_sb_info *sbi, */ if (free_blocks < ((root_blocks + nblocks) + dirty_blocks)) /* we don't have free space */ - return -ENOSPC; + return 0; - /* Add the blocks to nblocks */ - percpu_counter_add(dbc, nblocks); - return 0; + return 1; } -/** - * ext4_has_free_blocks() - * @sbi: in-core super block structure. - * @nblocks: number of neeed blocks - * - * Check if filesystem has free blocks available for allocation. - * Return the number of blocks avaible for allocation for this request - * On success, return nblocks - */ -ext4_fsblk_t ext4_has_free_blocks(struct ext4_sb_info *sbi, +int ext4_claim_free_blocks(struct ext4_sb_info *sbi, s64 nblocks) { - s64 free_blocks, dirty_blocks; - s64 root_blocks = 0; - struct percpu_counter *fbc = &sbi->s_freeblocks_counter; - struct percpu_counter *dbc = &sbi->s_dirtyblocks_counter; - - free_blocks = percpu_counter_read_positive(fbc); - dirty_blocks = percpu_counter_read_positive(dbc); - - if (!capable(CAP_SYS_RESOURCE) && - sbi->s_resuid != current->fsuid && - (sbi->s_resgid == 0 || !in_group_p(sbi->s_resgid))) - root_blocks = ext4_r_blocks_count(sbi->s_es); - - if (free_blocks - (nblocks + root_blocks + dirty_blocks) < - EXT4_FREEBLOCKS_WATERMARK) { - free_blocks = percpu_counter_sum(fbc); - dirty_blocks = percpu_counter_sum(dbc); - } - if (free_blocks <= (root_blocks + dirty_blocks)) - /* we don't have free space */ + if (ext4_has_free_blocks(sbi, nblocks)) { + percpu_counter_add(&sbi->s_dirtyblocks_counter, nblocks); return 0; - - if (free_blocks - (root_blocks + dirty_blocks) < nblocks) - return free_blocks - (root_blocks + dirty_blocks); - return nblocks; + } else + return -ENOSPC; } - /** * ext4_should_retry_alloc() * @sb: super block diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 4880cc3e6727..b0537c827024 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1003,8 +1003,7 @@ extern ext4_fsblk_t ext4_new_blocks(handle_t *handle, struct inode *inode, ext4_lblk_t iblock, ext4_fsblk_t goal, unsigned long *count, int *errp); extern int ext4_claim_free_blocks(struct ext4_sb_info *sbi, s64 nblocks); -extern ext4_fsblk_t ext4_has_free_blocks(struct ext4_sb_info *sbi, - s64 nblocks); +extern int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks); extern void ext4_free_blocks(handle_t *handle, struct inode *inode, ext4_fsblk_t block, unsigned long count, int metadata); extern void ext4_free_blocks_sb(handle_t *handle, struct super_block *sb, -- cgit v1.2.3 From a996031c87e093017c0763326a08896a3a4817f4 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 28 Oct 2008 00:08:17 -0400 Subject: delay capable() check in ext4_has_free_blocks() As reported by Eric Paris, the capable() check in ext4_has_free_blocks() sometimes causes SELinux denials. We can rearrange the logic so that we only try to use the root-reserved blocks when necessary, and even then we can move the capable() test to last, to avoid the check most of the time. Signed-off-by: Eric Sandeen Reviewed-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/balloc.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index e28203ec45bd..d2003cdc36aa 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -599,18 +599,13 @@ void ext4_free_blocks(handle_t *handle, struct inode *inode, */ int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks) { - s64 free_blocks, dirty_blocks; - s64 root_blocks = 0; + s64 free_blocks, dirty_blocks, root_blocks; struct percpu_counter *fbc = &sbi->s_freeblocks_counter; struct percpu_counter *dbc = &sbi->s_dirtyblocks_counter; free_blocks = percpu_counter_read_positive(fbc); dirty_blocks = percpu_counter_read_positive(dbc); - - if (!capable(CAP_SYS_RESOURCE) && - sbi->s_resuid != current->fsuid && - (sbi->s_resgid == 0 || !in_group_p(sbi->s_resgid))) - root_blocks = ext4_r_blocks_count(sbi->s_es); + root_blocks = ext4_r_blocks_count(sbi->s_es); if (free_blocks - (nblocks + root_blocks + dirty_blocks) < EXT4_FREEBLOCKS_WATERMARK) { @@ -623,13 +618,20 @@ int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks) } } /* Check whether we have space after - * accounting for current dirty blocks + * accounting for current dirty blocks & root reserved blocks. */ - if (free_blocks < ((root_blocks + nblocks) + dirty_blocks)) - /* we don't have free space */ - return 0; + if (free_blocks >= ((root_blocks + nblocks) + dirty_blocks)) + return 1; - return 1; + /* Hm, nope. Are (enough) root reserved blocks available? */ + if (sbi->s_resuid == current->fsuid || + ((sbi->s_resgid != 0) && in_group_p(sbi->s_resgid)) || + capable(CAP_SYS_RESOURCE)) { + if (free_blocks >= (nblocks + dirty_blocks)) + return 1; + } + + return 0; } int ext4_claim_free_blocks(struct ext4_sb_info *sbi, -- cgit v1.2.3 From 2830c9fb8e66cee70b8bffdfb0de01c144c7e643 Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Fri, 24 Oct 2008 11:00:35 -0700 Subject: i7300_idle: Kconfig, show menu only on x86_64 ...since today it contains only a single driver which is visible to just x86_64 Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/idle/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig index 108264de0ac9..f15e90a453d1 100644 --- a/drivers/idle/Kconfig +++ b/drivers/idle/Kconfig @@ -1,5 +1,6 @@ menu "Memory power savings" +depends on X86_64 config I7300_IDLE_IOAT_CHANNEL bool @@ -7,7 +8,7 @@ config I7300_IDLE_IOAT_CHANNEL config I7300_IDLE tristate "Intel chipset idle memory power saving driver" select I7300_IDLE_IOAT_CHANNEL - depends on X86_64 && EXPERIMENTAL + depends on EXPERIMENTAL help Enable memory power savings when idle with certain Intel server chipsets. The chipset must have I/O AT support, such as the -- cgit v1.2.3 From 39e96c8835c36b6867b4e18698b06746972cdfcc Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 18 Nov 2008 17:48:22 +0800 Subject: Blackfin arch: fix bug - dmacopy test case fail on all platform The cache code I added flushes 1 line too little if the start address is not aligned to the cache size. Cache align the start address so that when we straddle cache aligns, we get the right count. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/cache.S | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index db532181fbde..d6780b495241 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -25,9 +25,13 @@ */ .macro do_flush flushins:req optflushins optnopins label + R2 = -L1_CACHE_BYTES; + + /* start = (start & -L1_CACHE_BYTES) */ + R0 = R0 & R2; + /* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */ R1 += -1; - R2 = -L1_CACHE_BYTES; R1 = R1 & R2; R1 += L1_CACHE_BYTES; -- cgit v1.2.3 From 7f6b2e7b1ff70bc60cedc9a00b01c1fad5c21371 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 28 Oct 2008 12:29:26 +0800 Subject: Blackfin arch: fix bug - kernel build with write back policy fails to be booted up Make sure IFLUSH is not the last instruction in the hardware loop to avoid infinite core stall. The dcache/icache function that only gets used in writeback mode was putting IFLUSH as the last instruction in the hardware loop ... we know from design that this may often lead to inifite core stalling, so switch the FLUSH/IFLUSH order. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/cache.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index d6780b495241..a028e9450419 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -67,7 +67,7 @@ ENDPROC(_blackfin_icache_flush_range) /* Flush all cache lines assocoiated with this area of memory. */ ENTRY(_blackfin_icache_dcache_flush_range) - do_flush IFLUSH, FLUSH + do_flush FLUSH, IFLUSH ENDPROC(_blackfin_icache_dcache_flush_range) /* Throw away all D-cached data in specified region without any obligation to -- cgit v1.2.3 From bd2b064ecd5504a9e9eeaa5742b9f8bcc6d27637 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 16 Oct 2008 17:29:10 -0400 Subject: sony-laptop: Ignore missing _DIS method on pic device At least the Vaio VGN-Z540N doesn't have this method, so let's not fail to suspend just because it doesn't exist. Signed-off-by: Adam Jackson Acked-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 5a97d3a9d745..f483c4221f76 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -2315,8 +2315,10 @@ end: */ static int sony_pic_disable(struct acpi_device *device) { - if (ACPI_FAILURE(acpi_evaluate_object(device->handle, - "_DIS", NULL, NULL))) + acpi_status ret = acpi_evaluate_object(device->handle, "_DIS", NULL, + NULL); + + if (ACPI_FAILURE(ret) && ret != AE_NOT_FOUND) return -ENXIO; dprintk("Device disabled\n"); -- cgit v1.2.3 From b1b57fbe9bb10d94682a975456de7a727d1dbc84 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 27 Oct 2008 16:04:53 +0800 Subject: ACPI: fix de-reference bug in power resource driver change state to *state in the function of acpi_power_get_state() Signed-off-by: yakui.zhao@intel.com Signed-off-by: Len Brown --- drivers/acpi/power.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index a1718e56103b..30d4a5282a2d 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -153,7 +153,8 @@ static int acpi_power_get_state(acpi_handle handle, int *state) ACPI_POWER_RESOURCE_STATE_OFF; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n", - acpi_ut_get_node_name(handle), state ? "on" : "off")); + acpi_ut_get_node_name(handle), + *state ? "on" : "off")); return 0; } -- cgit v1.2.3 From 676962dac6e267ce7c13f73962208f9124a084bb Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 27 Oct 2008 16:05:39 +0800 Subject: ACPI: fan: Delete the strict check in power transition On some laptops the Fan device is turned on/off by controlling the corresponding power resource. For example: If the power resource defined in _PR0 object is turned off, it indicates that the FAN device is in off state(the ACPI state is in D3 state). Maybe the device is already in D3 state and expected to be transited to D3 state. As there is no _PR3 object, the power transition can't be finished and it will be switched to the Unknown state. Maybe it is more reasonable that the strick check in power transistion is deleted. http://bugzilla.kernel.org/show_bug.cgi?id=9485 Signed-off-by: yakui.zhao@intel.com Signed-off-by: Len Brown --- drivers/acpi/power.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 30d4a5282a2d..89111cd28ed8 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -517,11 +517,6 @@ int acpi_power_transition(struct acpi_device *device, int state) cl = &device->power.states[device->power.state].resources; tl = &device->power.states[state].resources; - if (!cl->count && !tl->count) { - result = -ENODEV; - goto end; - } - /* TBD: Resources must be ordered. */ /* -- cgit v1.2.3 From ed206fac87d65917280b6c3edd3f01125d4095c9 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 27 Oct 2008 14:01:02 -0700 Subject: ACPI: bugfix reporting of event handler status Introduce a new flag showing whether the event has an event handler/method. For all the GPEs and Fixed Events, 1. ACPI_EVENT_FLAG_HANDLE is cleared, it's an "invalid" ACPI event. 2. Both ACPI_EVENT_FLAG_HANDLE and ACPI_EVENT_FLAG_DISABLE are set, it's "disabled". 3. Both ACPI_EVENT_FLAG_HANDLE and ACPI_EVENT_FLAG_ENABLE are set, it's "enabled". 4. Both ACPI_EVENT_FLAG_HANDLE and ACPI_EVENT_FLAG_WAKE_ENABLE are set, it's "wake_enabled". Among other things, this prevents incorrect reporting of ACPI events as being "invalid" when it's really just (temporarily) "disabled". Signed-off-by: Zhang Rui Signed-off-by: David Brownell Signed-off-by: Len Brown --- Documentation/ABI/testing/sysfs-firmware-acpi | 16 ++++++++-------- drivers/acpi/events/evxfevnt.c | 6 ++++++ drivers/acpi/system.c | 19 +++++++------------ include/acpi/actypes.h | 1 + 4 files changed, 22 insertions(+), 20 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index f27be7d1a49f..e8ffc70ffe12 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -89,7 +89,7 @@ Description: error - an interrupt that can't be accounted for above. - invalid: it's either a wakeup GPE or a GPE/Fixed Event that + invalid: it's either a GPE or a Fixed Event that doesn't have an event handler. disable: the GPE/Fixed Event is valid but disabled. @@ -117,30 +117,30 @@ Description: and other user space applications so that the machine won't shutdown when pressing the power button. # cat ff_pwr_btn - 0 + 0 enabled # press the power button for 3 times; # cat ff_pwr_btn - 3 + 3 enabled # echo disable > ff_pwr_btn # cat ff_pwr_btn - disable + 3 disabled # press the power button for 3 times; # cat ff_pwr_btn - disable + 3 disabled # echo enable > ff_pwr_btn # cat ff_pwr_btn - 4 + 4 enabled /* * this is because the status bit is set even if the enable bit is cleared, * and it triggers an ACPI fixed event when the enable bit is set again */ # press the power button for 3 times; # cat ff_pwr_btn - 7 + 7 enabled # echo disable > ff_pwr_btn # press the power button for 3 times; # echo clear > ff_pwr_btn /* clear the status bit */ # echo disable > ff_pwr_btn # cat ff_pwr_btn - 7 + 7 enabled diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c index 73bfd6bf962f..211e93a90e95 100644 --- a/drivers/acpi/events/evxfevnt.c +++ b/drivers/acpi/events/evxfevnt.c @@ -521,6 +521,9 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) if (value) *event_status |= ACPI_EVENT_FLAG_SET; + if (acpi_gbl_fixed_event_handlers[event].handler) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + return_ACPI_STATUS(status); } @@ -571,6 +574,9 @@ acpi_get_gpe_status(acpi_handle gpe_device, status = acpi_hw_get_gpe_status(gpe_event_info, event_status); + if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + unlock_and_exit: if (flags & ACPI_NOT_ISR) { (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171b7940..6d348dce0810 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -167,7 +167,6 @@ static int acpi_system_sysfs_init(void) #define COUNT_ERROR 2 /* other */ #define NUM_COUNTERS_EXTRA 3 -#define ACPI_EVENT_VALID 0x01 struct event_counter { u32 count; u32 flags; @@ -312,12 +311,6 @@ static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle) } else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS)) result = acpi_get_event_status(index - num_gpes, status); - /* - * sleep/power button GPE/Fixed Event is enabled after acpi_system_init, - * check the status at runtime and mark it as valid once it's enabled - */ - if (!result && (*status & ACPI_EVENT_FLAG_ENABLED)) - all_counters[index].flags |= ACPI_EVENT_VALID; end: return result; } @@ -346,12 +339,14 @@ static ssize_t counter_show(struct kobject *kobj, if (result) goto end; - if (!(all_counters[index].flags & ACPI_EVENT_VALID)) - size += sprintf(buf + size, " invalid"); + if (!(status & ACPI_EVENT_FLAG_HANDLE)) + size += sprintf(buf + size, " invalid"); else if (status & ACPI_EVENT_FLAG_ENABLED) - size += sprintf(buf + size, " enable"); + size += sprintf(buf + size, " enabled"); + else if (status & ACPI_EVENT_FLAG_WAKE_ENABLED) + size += sprintf(buf + size, " wake_enabled"); else - size += sprintf(buf + size, " disable"); + size += sprintf(buf + size, " disabled"); end: size += sprintf(buf + size, "\n"); @@ -385,7 +380,7 @@ static ssize_t counter_set(struct kobject *kobj, if (result) goto end; - if (!(all_counters[index].flags & ACPI_EVENT_VALID)) { + if (!(status & ACPI_EVENT_FLAG_HANDLE)) { printk(KERN_WARNING PREFIX "Can not change Invalid GPE/Fixed Event status\n"); return -EINVAL; diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index e8936ab59627..7220361790b3 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -525,6 +525,7 @@ typedef u32 acpi_event_status; #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01 #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02 #define ACPI_EVENT_FLAG_SET (acpi_event_status) 0x04 +#define ACPI_EVENT_FLAG_HANDLE (acpi_event_status) 0x08 /* * General Purpose Events (GPE) -- cgit v1.2.3 From da986b9ffff79224417b69cf43506192bd9c29dc Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 28 Oct 2008 13:58:15 +0800 Subject: Blackfin arch: dont warn when running a kernel on the oldest supported silicon Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 8337dc3a62d7..71a9a8c53cea 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -827,7 +827,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n", bfin_compiled_revid(), bfin_revid()); } - if (bfin_revid() <= CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX) + if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX) printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n", CPU, bfin_revid()); } -- cgit v1.2.3 From a10101d5ff9e34c0a1a526725474eef84409529a Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 28 Oct 2008 14:18:29 +0800 Subject: Blackfin arch: fix bug - Cpufreq assumes clocks in kHz and not Hz. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/cpufreq.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index c22c47b60127..dda5443b37ed 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -72,13 +72,13 @@ unsigned int __bfin_cycles_mod; /**************************************************************************/ -static unsigned int bfin_getfreq(unsigned int cpu) +static unsigned int bfin_getfreq_khz(unsigned int cpu) { /* The driver only support single cpu */ if (cpu != 0) return -1; - return get_cclk(); + return get_cclk() / 1000; } @@ -96,7 +96,7 @@ static int bfin_target(struct cpufreq_policy *policy, cclk_hz = bfin_freq_table[index].frequency; - freqs.old = bfin_getfreq(0); + freqs.old = bfin_getfreq_khz(0); freqs.new = cclk_hz; freqs.cpu = 0; @@ -137,8 +137,8 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) if (policy->cpu != 0) return -EINVAL; - cclk = get_cclk(); - sclk = get_sclk(); + cclk = get_cclk() / 1000; + sclk = get_sclk() / 1000; #if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE)) min_cclk = sclk * 2; @@ -152,7 +152,7 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1; - pr_debug("cpufreq: freq:%d csel:%d tscale:%d\n", + pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", bfin_freq_table[index].frequency, dpm_state_table[index].csel, dpm_state_table[index].tscale); @@ -173,7 +173,7 @@ static struct freq_attr *bfin_freq_attr[] = { static struct cpufreq_driver bfin_driver = { .verify = bfin_verify_speed, .target = bfin_target, - .get = bfin_getfreq, + .get = bfin_getfreq_khz, .init = __bfin_cpu_init, .name = "bfin cpufreq", .owner = THIS_MODULE, -- cgit v1.2.3 From 72edff8dd45fdee6e1a2bc431baefd8a5372f7cb Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 28 Oct 2008 15:42:13 +0800 Subject: Blackfin arch: fix incorrect limit check for bf54x check_gpio Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 6e08f425bb44..5c0800adb4dd 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -218,7 +218,7 @@ inline int check_gpio(unsigned gpio) if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 || gpio == GPIO_PH14 || gpio == GPIO_PH15 || gpio == GPIO_PJ14 || gpio == GPIO_PJ15 - || gpio > MAX_BLACKFIN_GPIOS) + || gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; } -- cgit v1.2.3 From b2c2f30388c682520ae2d07c8852b4225dd4a4d7 Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Tue, 28 Oct 2008 15:57:49 +0800 Subject: Blackfin arch: fix bug - shared lib function in L2 failed be called Allow user space to access L2 SRAM. Signed-off-by: Jie Zhang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/process.c | 7 ++++++- arch/blackfin/mm/sram-alloc.c | 8 ++++---- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 77800dd83e57..0c3ea118b657 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -351,9 +351,14 @@ int _access_ok(unsigned long addr, unsigned long size) return 1; #endif #if L1_DATA_B_LENGTH != 0 - if (addr >= L1_DATA_B_START + if (addr >= L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1) && addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH) return 1; +#endif +#if L2_LENGTH != 0 + if (addr >= L2_START + (_ebss_l2 - _stext_l2) + && addr + size <= L2_START + L2_LENGTH) + return 1; #endif return 0; } diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index 0f1ca6930c16..cc6f336e7313 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -183,10 +183,10 @@ static void __init l2_sram_init(void) return; } - free_l2_sram_head.next->paddr = (void *)L2_START + - (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2); - free_l2_sram_head.next->size = L2_LENGTH - - (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2); + free_l2_sram_head.next->paddr = + (void *)L2_START + (_ebss_l2 - _stext_l2); + free_l2_sram_head.next->size = + L2_LENGTH - (_ebss_l2 - _stext_l2); free_l2_sram_head.next->pid = 0; free_l2_sram_head.next->next = NULL; -- cgit v1.2.3 From 8a2fd5f3ab6535035f08d7d0fda90abe73c6d282 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Oct 2008 17:19:35 +0900 Subject: sh: Fix FPU tuning on toolchains with mismatched multilib targets. Presently there is very little standing in the way of using an SH-4 toolchain for building an SH-2 kernel, and vice versa. Binutils itself has no limitations whatsoever and supports explicit ISA hinting, which we already use with varying degrees of success today. This leaves GCC as the odd one out, due to a rather dubious policy decision by the GCC folks to not include all of the CPU family variants in the default list of multilib targets in GCC4. Despite best efforts to the contrary, libgcc itself already contains awareness of the various CPU types and remains generally usable, allowing it to safely be referenced even on a mismatched target (and indeed, explicit ISA tuning by binutils keeps us honest in terms of ensuring that we do not link incompatible objects in). In order to support this, a couple of changes had to be made. Firstly, the introduction of MAYBE_DECLARE_EXPORT(), which provides a __weak extern reference for libgcc resident routines when finer-grained -m based tuning is not supported by the toolchain. This fixes up the __sdivsi3_i4i and __udivsi3_i4i references when dealing with SH-2 kernels linked with an SH-4 libgcc. Secondly, in case where we are unable to find a suitable match for CPU family tuning but still have a toolchain that defaults to FP instruction generation, a suitable nofpu target must be selected. This is accomplished by selecting the first nofpu multilib target supported by the toolchain, which is also necessary for selecting the proper libgcc to link against. Signed-off-by: Paul Mundt --- arch/sh/Makefile | 16 ++++++++++++++++ arch/sh/kernel/sh_ksyms_32.c | 11 ++++++----- 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 1f409bf81809..3b2d8e232240 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -38,6 +38,22 @@ cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \ $(call cc-option,-m4a-nofpu,) cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,) +ifeq ($(cflags-y),) +# +# In the case where we are stuck with a compiler that has been uselessly +# restricted to a particular ISA, a favourite default of newer GCCs when +# extensive multilib targets are not provided, ensure we get the best fit +# regarding FP generation. This is necessary to avoid references to FP +# variants in libgcc where integer variants exist, which otherwise result +# in link errors. This is intentionally stupid (albeit many orders of +# magnitude less than GCC's default behaviour), as anything with a large +# number of multilib targets better have been built correctly for +# the target in mind. +# +cflags-y += $(shell $(CC) $(KBUILD_CFLAGS) -print-multi-lib | \ + grep nofpu | sed q | sed -e 's/^/-/;s/;.*$$//') +endif + cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index d366a7443720..d998f4c795be 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -50,7 +50,10 @@ EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); EXPORT_SYMBOL(__const_udelay); -#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name) +#define DECLARE_EXPORT(name) \ + extern void name(void);EXPORT_SYMBOL(name) +#define MAYBE_DECLARE_EXPORT(name) \ + extern void name(void) __weak;EXPORT_SYMBOL(name) /* These symbols are generated by the compiler itself */ DECLARE_EXPORT(__udivsi3); @@ -109,10 +112,8 @@ DECLARE_EXPORT(__movmemSI12_i4); * compiler which include backported patches. */ DECLARE_EXPORT(__udiv_qrnnd_16); -#if !defined(CONFIG_CPU_SH2) -DECLARE_EXPORT(__sdivsi3_i4i); -DECLARE_EXPORT(__udivsi3_i4i); -#endif +MAYBE_DECLARE_EXPORT(__sdivsi3_i4i); +MAYBE_DECLARE_EXPORT(__udivsi3_i4i); #endif #else /* GCC 3.x */ DECLARE_EXPORT(__movstr_i4_even); -- cgit v1.2.3 From e00afb64239dc764193d48a28bbfba6da2b3b5de Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 28 Oct 2008 17:36:11 +0900 Subject: sh: Provide a sample defconfig for the UL2 (SH7366) board. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/configs/ul2_defconfig | 1169 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1169 insertions(+) create mode 100644 arch/sh/configs/ul2_defconfig diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig new file mode 100644 index 000000000000..9afff67d9ff2 --- /dev/null +++ b/arch/sh/configs/ul2_defconfig @@ -0,0 +1,1169 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 17:35:17 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SH4AL_DSP=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +CONFIG_CPU_SUBTYPE_SH7366=y +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x01f00000 +CONFIG_29BIT=y +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +CONFIG_NUMA=y +CONFIG_NODES_SHIFT=1 +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_SH_FPU_EMU is not set +# CONFIG_SH_DSP is not set +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_NL80211=y +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_IEEE80211=m +CONFIG_IEEE80211_DEBUG=y +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +CONFIG_PATA_PLATFORM=y +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_DEBUG=y +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y +# CONFIG_SUPERH_ON_CHIP_R8A66597 is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From 545727f32049f6e7269f73a49904e3229192988e Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 27 Oct 2008 11:32:27 +0900 Subject: gdrom: Fix compile error Return value and argument of block_device_operations.release of gdrom was changed. This patch fix this problem. Signed-off-by: Nobuhiro Iwamatsu Acked-by: Al Viro Signed-off-by: Paul Mundt --- drivers/cdrom/gdrom.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index 9aaa86b232b1..2eecb779437b 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -495,9 +495,10 @@ static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode) return cdrom_open(gd.cd_info, bdev, mode); } -static int gdrom_bdops_release(struct block_device *bdev, fmode_t mode) +static int gdrom_bdops_release(struct gendisk *disk, fmode_t mode) { - return cdrom_release(gd.cd_info, mode); + cdrom_release(gd.cd_info, mode); + return 0; } static int gdrom_bdops_mediachanged(struct gendisk *disk) -- cgit v1.2.3 From 5ca8c4852fcbbc8a8497c4ee8b2a0a7466f3524c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 28 Oct 2008 15:33:48 +0900 Subject: SH 7366 needs SCIF_ONLY SH 7366 has compile bug. because there is no SCIF_ONLY for SH 7366. this patch add it. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 7cd28b226800..44e952bca1ef 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -88,6 +88,7 @@ # define SCSPTR0 SCPDR0 # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7723) # define SCSPTR0 0xa4050160 # define SCSPTR1 0xa405013e -- cgit v1.2.3 From b4d36a254f30e266fb47aec502978f615b8f7ca4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Oct 2008 18:40:19 +0900 Subject: sh: Add on-chip RTC support for SH7722. Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh4/cpu/rtc.h | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 34 ++++++++++++++++++++++++++++++++-- 2 files changed, 33 insertions(+), 3 deletions(-) diff --git a/arch/sh/include/cpu-sh4/cpu/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h index 25b1e6adfe8c..95e6fb76c24d 100644 --- a/arch/sh/include/cpu-sh4/cpu/rtc.h +++ b/arch/sh/include/cpu-sh4/cpu/rtc.h @@ -1,7 +1,7 @@ #ifndef __ASM_SH_CPU_SH4_RTC_H #define __ASM_SH_CPU_SH4_RTC_H -#ifdef CONFIG_CPU_SUBTYPE_SH7723 +#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7723) #define rtc_reg_size sizeof(u16) #else #define rtc_reg_size sizeof(u32) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index de1ede92176e..ef77ee1d9f53 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -1,7 +1,7 @@ /* * SH7722 Setup * - * Copyright (C) 2006 - 2007 Paul Mundt + * Copyright (C) 2006 - 2008 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -16,6 +16,36 @@ #include #include +static struct resource rtc_resources[] = { + [0] = { + .start = 0xa465fec0, + .end = 0xa465fec0 + 0x58 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 45, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 46, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 44, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + static struct resource usbf_resources[] = { [0] = { .name = "m66592_udc", @@ -150,6 +180,7 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7722_devices[] __initdata = { + &rtc_device, &usbf_device, &iic_device, &sci_device, @@ -202,7 +233,6 @@ enum { IRDA, JPU, LCDC, /* interrupt groups */ - SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI, }; -- cgit v1.2.3 From 1a30603233fdd104aba430fd8f3443160474b6bb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Oct 2008 18:50:00 +0900 Subject: sh: sh7785lcr: Select uImage as default image target. Signed-off-by: Paul Mundt --- arch/sh/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 3b2d8e232240..240ad6be0daa 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -81,7 +81,8 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ -R .stab -R .stabstr -S # Give the various platforms the opportunity to set default image types -defaultimage-$(CONFIG_SUPERH32) := zImage +defaultimage-$(CONFIG_SUPERH32) := zImage +defaultimage-$(CONFIG_SH_SH7785LCR) := uImage # Set some sensible Kbuild defaults KBUILD_DEFCONFIG := shx3_defconfig -- cgit v1.2.3 From b2d86a3fd9855380598c0c039e712a20086e119f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Oct 2008 19:37:05 +0900 Subject: sh: Simplify and lock down the ISA tuning. The ISA tuning as it is today can not cope with all of the different variations that are possible, so all we can do is a best attempt based on the CPU family. The DSP and FPU generation are already at odds with each other, and the nommu tuning we weren't handling at all. Additionally, for platforms that never had an FPU, the -nofpu variant never existed, meaning that we would lose out on family granular tuning completely in certain cases. With tat out of the way, we were also using -up versions, allowing for later instructions that branched off of a particular subset of the ISA, but are not actually reflected on the hardware being targetted. This leads to some confusion, and the possibility of bogus instructions on older parts. Kill that off and lock it down to the family being built for specifically. Signed-off-by: Paul Mundt --- arch/sh/Makefile | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 240ad6be0daa..3a74ed62ec89 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -2,7 +2,7 @@ # arch/sh/Makefile # # Copyright (C) 1999 Kaz Kojima -# Copyright (C) 2002, 2003, 2004 Paul Mundt +# Copyright (C) 2002 - 2008 Paul Mundt # Copyright (C) 2002 M. R. Brown # # This file is subject to the terms and conditions of the GNU General Public @@ -20,14 +20,6 @@ isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al isa-$(CONFIG_CPU_SH5) := shmedia isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp -ifndef CONFIG_SH_DSP -ifndef CONFIG_SH_FPU -isa-y := $(isa-y)-nofpu -endif -endif - -isa-y := $(isa-y)-up - cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,) cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \ $(call cc-option,-m2a-nofpu,) -- cgit v1.2.3 From 5ff0594e2f6fb3242a1a2a4794286244e95afab1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Oct 2008 19:45:47 +0900 Subject: sh: Revert "SH 7366 needs SCIF_ONLY" This reverts commit 5ca8c4852fcbbc8a8497c4ee8b2a0a7466f3524c. With the killing off of SCIF_ONLY and its spawn in sh-sci, we no longer require this change, so just revert it. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 36ce9de4b2cd..257b2235d126 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -79,7 +79,6 @@ # define SCSPTR0 SCPDR0 # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7723) # define SCSPTR0 0xa4050160 # define SCSPTR1 0xa405013e -- cgit v1.2.3 From 3eeebf17f31c583f83e081b17b3076477cb96886 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Oct 2008 20:07:44 +0900 Subject: sh: Kill off long-dead HD64465 cchip support. This code has been dead for many years. The last update it received was in 2003 in order to update it for the driver model changes, though it had already been in disarray and unused before that point. The only boards that ever used this chip have not had users in many years either, so it is finally safe to just kill it off and move on with life. Signed-off-by: Paul Mundt --- Documentation/sh/new-machine.txt | 4 +- arch/sh/cchips/Kconfig | 33 -- arch/sh/cchips/hd6446x/Makefile | 1 - arch/sh/cchips/hd6446x/hd64465/Makefile | 6 - arch/sh/cchips/hd6446x/hd64465/gpio.c | 196 ------- arch/sh/cchips/hd6446x/hd64465/io.c | 211 ------- arch/sh/cchips/hd6446x/hd64465/setup.c | 181 ------ arch/sh/include/asm/hd64465/gpio.h | 46 -- arch/sh/include/asm/hd64465/hd64465.h | 256 --------- arch/sh/include/asm/hd64465/io.h | 44 -- arch/sh/include/asm/serial.h | 17 - arch/sh/tools/mach-types | 1 - drivers/pcmcia/Kconfig | 4 - drivers/pcmcia/Makefile | 1 - drivers/pcmcia/hd64465_ss.c | 939 -------------------------------- 15 files changed, 1 insertion(+), 1939 deletions(-) delete mode 100644 arch/sh/cchips/hd6446x/hd64465/Makefile delete mode 100644 arch/sh/cchips/hd6446x/hd64465/gpio.c delete mode 100644 arch/sh/cchips/hd6446x/hd64465/io.c delete mode 100644 arch/sh/cchips/hd6446x/hd64465/setup.c delete mode 100644 arch/sh/include/asm/hd64465/gpio.h delete mode 100644 arch/sh/include/asm/hd64465/hd64465.h delete mode 100644 arch/sh/include/asm/hd64465/io.h delete mode 100644 drivers/pcmcia/hd64465_ss.c diff --git a/Documentation/sh/new-machine.txt b/Documentation/sh/new-machine.txt index 5482bf5d005b..f0354164cb0e 100644 --- a/Documentation/sh/new-machine.txt +++ b/Documentation/sh/new-machine.txt @@ -47,9 +47,7 @@ Next, for companion chips: `-- sh `-- cchips `-- hd6446x - |-- hd64461 - | `-- cchip-specific files - `-- hd64465 + `-- hd64461 `-- cchip-specific files ... and so on. Headers for the companion chips are treated the same way as diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig index 7892361eedc8..f43d18373f22 100644 --- a/arch/sh/cchips/Kconfig +++ b/arch/sh/cchips/Kconfig @@ -22,20 +22,6 @@ config HD64461 Say Y if you want support for the HD64461. Otherwise, say N. -config HD64465 - bool "Hitachi HD64465 companion chip support" - ---help--- - The Hitachi HD64465 provides an interface for - the SH7750 CPU, supporting a LCD controller, - CRT color controller, IrDA, USB, PCMCIA, - keyboard controller, and a printer interface. - - More information is available at - . - - Say Y if you want support for the HD64465. - Otherwise, say N. - endchoice # These will also be split into the Kconfig's below @@ -61,23 +47,4 @@ config HD64461_ENABLER via the HD64461 companion chip. Otherwise, say N. -config HD64465_IOBASE - hex "HD64465 start address" - depends on HD64465 - default "0xb0000000" - help - The default setting of the HD64465 IO base address is 0xb0000000. - - Do not change this unless you know what you are doing. - -config HD64465_IRQ - int "HD64465 IRQ" - depends on HD64465 - default "5" - help - The default setting of the HD64465 IRQ is 5. - - Do not change this unless you know what you are doing. - endmenu - diff --git a/arch/sh/cchips/hd6446x/Makefile b/arch/sh/cchips/hd6446x/Makefile index f7de4076e242..9682e3ab668f 100644 --- a/arch/sh/cchips/hd6446x/Makefile +++ b/arch/sh/cchips/hd6446x/Makefile @@ -1,4 +1,3 @@ obj-$(CONFIG_HD64461) += hd64461.o -obj-$(CONFIG_HD64465) += hd64465/ EXTRA_CFLAGS += -Werror diff --git a/arch/sh/cchips/hd6446x/hd64465/Makefile b/arch/sh/cchips/hd6446x/hd64465/Makefile deleted file mode 100644 index f66edcb52c5b..000000000000 --- a/arch/sh/cchips/hd6446x/hd64465/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the HD64465 -# - -obj-y := setup.o io.o gpio.o - diff --git a/arch/sh/cchips/hd6446x/hd64465/gpio.c b/arch/sh/cchips/hd6446x/hd64465/gpio.c deleted file mode 100644 index 43431855ec86..000000000000 --- a/arch/sh/cchips/hd6446x/hd64465/gpio.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * $Id: gpio.c,v 1.4 2003/05/19 22:24:18 lethal Exp $ - * by Greg Banks - * (c) 2000 PocketPenguins Inc - * - * GPIO pin support for HD64465 companion chip. - */ - -#include -#include -#include -#include -#include -#include -#include - -#define _PORTOF(portpin) (((portpin)>>3)&0x7) -#define _PINOF(portpin) ((portpin)&0x7) - -/* Register addresses parametrised on port */ -#define GPIO_CR(port) (HD64465_REG_GPACR+((port)<<1)) -#define GPIO_DR(port) (HD64465_REG_GPADR+((port)<<1)) -#define GPIO_ICR(port) (HD64465_REG_GPAICR+((port)<<1)) -#define GPIO_ISR(port) (HD64465_REG_GPAISR+((port)<<1)) - -#define GPIO_NPORTS 5 - -#define MODNAME "hd64465_gpio" - -EXPORT_SYMBOL(hd64465_gpio_configure); -EXPORT_SYMBOL(hd64465_gpio_get_pin); -EXPORT_SYMBOL(hd64465_gpio_get_port); -EXPORT_SYMBOL(hd64465_gpio_register_irq); -EXPORT_SYMBOL(hd64465_gpio_set_pin); -EXPORT_SYMBOL(hd64465_gpio_set_port); -EXPORT_SYMBOL(hd64465_gpio_unregister_irq); - -/* TODO: each port should be protected with a spinlock */ - - -void hd64465_gpio_configure(int portpin, int direction) -{ - unsigned short cr; - unsigned int shift = (_PINOF(portpin)<<1); - - cr = inw(GPIO_CR(_PORTOF(portpin))); - cr &= ~(3< - * (c) 2000 PocketPenguins Inc - * - * Derived from io_hd64461.c, which bore the message: - * Copyright (C) 2000 YAEGASHI Takeshi - * - * Typical I/O routines for HD64465 system. - */ - -#include -#include -#include -#include - - -#define HD64465_DEBUG 0 - -#if HD64465_DEBUG -#define DPRINTK(args...) printk(args) -#define DIPRINTK(n, args...) if (hd64465_io_debug>(n)) printk(args) -#else -#define DPRINTK(args...) -#define DIPRINTK(n, args...) -#endif - - - -/* This is a hack suitable only for debugging IO port problems */ -int hd64465_io_debug; -EXPORT_SYMBOL(hd64465_io_debug); - -/* Low iomap maps port 0-1K to addresses in 8byte chunks */ -#define HD64465_IOMAP_LO_THRESH 0x400 -#define HD64465_IOMAP_LO_SHIFT 3 -#define HD64465_IOMAP_LO_MASK ((1<>HD64465_IOMAP_LO_SHIFT) -static unsigned long hd64465_iomap_lo[HD64465_IOMAP_LO_NMAP]; -static unsigned char hd64465_iomap_lo_shift[HD64465_IOMAP_LO_NMAP]; - -/* High iomap maps port 1K-64K to addresses in 1K chunks */ -#define HD64465_IOMAP_HI_THRESH 0x10000 -#define HD64465_IOMAP_HI_SHIFT 10 -#define HD64465_IOMAP_HI_MASK ((1<>HD64465_IOMAP_HI_SHIFT) -static unsigned long hd64465_iomap_hi[HD64465_IOMAP_HI_NMAP]; -static unsigned char hd64465_iomap_hi_shift[HD64465_IOMAP_HI_NMAP]; - -#define PORT2ADDR(x) (sh_mv.mv_isa_port2addr(x)) - -void hd64465_port_map(unsigned short baseport, unsigned int nports, - unsigned long addr, unsigned char shift) -{ - unsigned int port, endport = baseport + nports; - - DPRINTK("hd64465_port_map(base=0x%04hx, n=0x%04hx, addr=0x%08lx,endport=0x%04x)\n", - baseport, nports, addr,endport); - - for (port = baseport ; - port < endport && port < HD64465_IOMAP_LO_THRESH ; - port += (1<>HD64465_IOMAP_LO_SHIFT] = addr; - hd64465_iomap_lo_shift[port>>HD64465_IOMAP_LO_SHIFT] = shift; - addr += (1<<(HD64465_IOMAP_LO_SHIFT)); - } - - for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH); - port < endport && port < HD64465_IOMAP_HI_THRESH ; - port += (1<>HD64465_IOMAP_HI_SHIFT] = addr; - hd64465_iomap_hi_shift[port>>HD64465_IOMAP_HI_SHIFT] = shift; - addr += (1<<(HD64465_IOMAP_HI_SHIFT)); - } -} -EXPORT_SYMBOL(hd64465_port_map); - -void hd64465_port_unmap(unsigned short baseport, unsigned int nports) -{ - unsigned int port, endport = baseport + nports; - - DPRINTK("hd64465_port_unmap(base=0x%04hx, n=0x%04hx)\n", - baseport, nports); - - for (port = baseport ; - port < endport && port < HD64465_IOMAP_LO_THRESH ; - port += (1<>HD64465_IOMAP_LO_SHIFT] = 0; - } - - for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH); - port < endport && port < HD64465_IOMAP_HI_THRESH ; - port += (1<>HD64465_IOMAP_HI_SHIFT] = 0; - } -} -EXPORT_SYMBOL(hd64465_port_unmap); - -unsigned long hd64465_isa_port2addr(unsigned long port) -{ - unsigned long addr = 0; - unsigned char shift; - - /* handle remapping of low IO ports */ - if (port < HD64465_IOMAP_LO_THRESH) { - addr = hd64465_iomap_lo[port >> HD64465_IOMAP_LO_SHIFT]; - shift = hd64465_iomap_lo_shift[port >> HD64465_IOMAP_LO_SHIFT]; - if (addr != 0) - addr += (port & HD64465_IOMAP_LO_MASK) << shift; - else - printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port); - } else if (port < HD64465_IOMAP_HI_THRESH) { - addr = hd64465_iomap_hi[port >> HD64465_IOMAP_HI_SHIFT]; - shift = hd64465_iomap_hi_shift[port >> HD64465_IOMAP_HI_SHIFT]; - if (addr != 0) - addr += (port & HD64465_IOMAP_HI_MASK) << shift; - else - printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port); - } - - /* HD64465 internal devices (0xb0000000) */ - else if (port < 0x20000) - addr = CONFIG_HD64465_IOBASE + port - 0x10000; - - /* Whole physical address space (0xa0000000) */ - else - addr = P2SEGADDR(port); - - DIPRINTK(2, "PORT2ADDR(0x%08lx) = 0x%08lx\n", port, addr); - - return addr; -} - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - -unsigned char hd64465_inb(unsigned long port) -{ - unsigned long addr = PORT2ADDR(port); - unsigned long b = (addr == 0 ? 0 : *(volatile unsigned char*)addr); - - DIPRINTK(0, "inb(%08lx) = %02x\n", addr, (unsigned)b); - return b; -} - -unsigned char hd64465_inb_p(unsigned long port) -{ - unsigned long v; - unsigned long addr = PORT2ADDR(port); - - v = (addr == 0 ? 0 : *(volatile unsigned char*)addr); - delay(); - DIPRINTK(0, "inb_p(%08lx) = %02x\n", addr, (unsigned)v); - return v; -} - -unsigned short hd64465_inw(unsigned long port) -{ - unsigned long addr = PORT2ADDR(port); - unsigned long b = (addr == 0 ? 0 : *(volatile unsigned short*)addr); - DIPRINTK(0, "inw(%08lx) = %04lx\n", addr, b); - return b; -} - -unsigned int hd64465_inl(unsigned long port) -{ - unsigned long addr = PORT2ADDR(port); - unsigned int b = (addr == 0 ? 0 : *(volatile unsigned long*)addr); - DIPRINTK(0, "inl(%08lx) = %08x\n", addr, b); - return b; -} - -void hd64465_outb(unsigned char b, unsigned long port) -{ - unsigned long addr = PORT2ADDR(port); - - DIPRINTK(0, "outb(%02x, %08lx)\n", (unsigned)b, addr); - if (addr != 0) - *(volatile unsigned char*)addr = b; -} - -void hd64465_outb_p(unsigned char b, unsigned long port) -{ - unsigned long addr = PORT2ADDR(port); - - DIPRINTK(0, "outb_p(%02x, %08lx)\n", (unsigned)b, addr); - if (addr != 0) - *(volatile unsigned char*)addr = b; - delay(); -} - -void hd64465_outw(unsigned short b, unsigned long port) -{ - unsigned long addr = PORT2ADDR(port); - DIPRINTK(0, "outw(%04x, %08lx)\n", (unsigned)b, addr); - if (addr != 0) - *(volatile unsigned short*)addr = b; -} - -void hd64465_outl(unsigned int b, unsigned long port) -{ - unsigned long addr = PORT2ADDR(port); - DIPRINTK(0, "outl(%08x, %08lx)\n", b, addr); - if (addr != 0) - *(volatile unsigned long*)addr = b; -} - diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c deleted file mode 100644 index 9b8820c36701..000000000000 --- a/arch/sh/cchips/hd6446x/hd64465/setup.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * $Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $ - * - * Setup and IRQ handling code for the HD64465 companion chip. - * by Greg Banks - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64461.c which bore the message: - * Copyright (C) 2000 YAEGASHI Takeshi - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static void disable_hd64465_irq(unsigned int irq) -{ - unsigned short nimr; - unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); - - pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask); - nimr = inw(HD64465_REG_NIMR); - nimr |= mask; - outw(nimr, HD64465_REG_NIMR); -} - -static void enable_hd64465_irq(unsigned int irq) -{ - unsigned short nimr; - unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); - - pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask); - nimr = inw(HD64465_REG_NIMR); - nimr &= ~mask; - outw(nimr, HD64465_REG_NIMR); -} - -static void mask_and_ack_hd64465(unsigned int irq) -{ - disable_hd64465_irq(irq); -} - -static void end_hd64465_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_hd64465_irq(irq); -} - -static unsigned int startup_hd64465_irq(unsigned int irq) -{ - enable_hd64465_irq(irq); - return 0; -} - -static void shutdown_hd64465_irq(unsigned int irq) -{ - disable_hd64465_irq(irq); -} - -static struct hw_interrupt_type hd64465_irq_type = { - .typename = "HD64465-IRQ", - .startup = startup_hd64465_irq, - .shutdown = shutdown_hd64465_irq, - .enable = enable_hd64465_irq, - .disable = disable_hd64465_irq, - .ack = mask_and_ack_hd64465, - .end = end_hd64465_irq, -}; - -static irqreturn_t hd64465_interrupt(int irq, void *dev_id) -{ - printk(KERN_INFO - "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", - inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR)); - - return IRQ_NONE; -} - -/* - * Support for a secondary IRQ demux step. This is necessary - * because the HD64465 presents a very thin interface to the - * PCMCIA bus; a lot of features (such as remapping interrupts) - * normally done in hardware by other PCMCIA host bridges is - * instead done in software. - */ -static struct { - int (*func)(int, void *); - void *dev; -} hd64465_demux[HD64465_IRQ_NUM]; - -void hd64465_register_irq_demux(int irq, - int (*demux)(int irq, void *dev), void *dev) -{ - hd64465_demux[irq - HD64465_IRQ_BASE].func = demux; - hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev; -} -EXPORT_SYMBOL(hd64465_register_irq_demux); - -void hd64465_unregister_irq_demux(int irq) -{ - hd64465_demux[irq - HD64465_IRQ_BASE].func = 0; -} -EXPORT_SYMBOL(hd64465_unregister_irq_demux); - -int hd64465_irq_demux(int irq) -{ - if (irq == CONFIG_HD64465_IRQ) { - unsigned short i, bit; - unsigned short nirr = inw(HD64465_REG_NIRR); - unsigned short nimr = inw(HD64465_REG_NIMR); - - pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr); - nirr &= ~nimr; - for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++) - if (nirr & bit) - break; - - if (i < HD64465_IRQ_NUM) { - irq = HD64465_IRQ_BASE + i; - if (hd64465_demux[i].func != 0) - irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev); - } - } - return irq; -} - -static struct irqaction irq0 = { - .handler = hd64465_interrupt, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "HD64465", -}; - -static int __init setup_hd64465(void) -{ - int i; - unsigned short rev; - unsigned short smscr; - - if (!MACH_HD64465) - return 0; - - printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n", - CONFIG_HD64465_IOBASE, - CONFIG_HD64465_IRQ, - HD64465_IRQ_BASE, - HD64465_IRQ_BASE+HD64465_IRQ_NUM-1); - - if (inw(HD64465_REG_SDID) != HD64465_SDID) { - printk(KERN_ERR "HD64465 device ID not found, check base address\n"); - } - - rev = inw(HD64465_REG_SRR); - printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff); - - outw(0xffff, HD64465_REG_NIMR); /* mask all interrupts */ - - for (i = 0; i < HD64465_IRQ_NUM ; i++) { - irq_desc[HD64465_IRQ_BASE + i].chip = &hd64465_irq_type; - } - - setup_irq(CONFIG_HD64465_IRQ, &irq0); - - /* wake up the UART from STANDBY at this point */ - smscr = inw(HD64465_REG_SMSCR); - outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR); - - /* remap IO ports for first ISA serial port to HD64465 UART */ - hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); - - return 0; -} -module_init(setup_hd64465); diff --git a/arch/sh/include/asm/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h deleted file mode 100644 index a3cdca2713dd..000000000000 --- a/arch/sh/include/asm/hd64465/gpio.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef _ASM_SH_HD64465_GPIO_ -#define _ASM_SH_HD64465_GPIO_ 1 -/* - * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $ - * - * Hitachi HD64465 companion chip: General Purpose IO pins support. - * This layer enables other device drivers to configure GPIO - * pins, get and set their values, and register an interrupt - * routine for when input pins change in hardware. - * - * by Greg Banks - * (c) 2000 PocketPenguins Inc. - */ -#include - -/* Macro to construct a portpin number (used in all - * subsequent functions) from a port letter and a pin - * number, e.g. HD64465_GPIO_PORTPIN('A', 5). - */ -#define HD64465_GPIO_PORTPIN(port,pin) (((port)-'A')<<3|(pin)) - -/* Pin configuration constants for _configure() */ -#define HD64465_GPIO_FUNCTION2 0 /* use the pin's *other* function */ -#define HD64465_GPIO_OUT 1 /* output */ -#define HD64465_GPIO_IN_PULLUP 2 /* input, pull-up MOS on */ -#define HD64465_GPIO_IN 3 /* input */ - -/* Configure a pin's direction */ -extern void hd64465_gpio_configure(int portpin, int direction); - -/* Get, set value */ -extern void hd64465_gpio_set_pin(int portpin, unsigned int value); -extern unsigned int hd64465_gpio_get_pin(int portpin); -extern void hd64465_gpio_set_port(int port, unsigned int value); -extern unsigned int hd64465_gpio_get_port(int port); - -/* mode constants for _register_irq() */ -#define HD64465_GPIO_FALLING 0 -#define HD64465_GPIO_RISING 1 - -/* Interrupt on external value change */ -extern void hd64465_gpio_register_irq(int portpin, int mode, - void (*handler)(int portpin, void *dev), void *dev); -extern void hd64465_gpio_unregister_irq(int portpin); - -#endif /* _ASM_SH_HD64465_GPIO_ */ diff --git a/arch/sh/include/asm/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h deleted file mode 100644 index cfd0e803d2a2..000000000000 --- a/arch/sh/include/asm/hd64465/hd64465.h +++ /dev/null @@ -1,256 +0,0 @@ -#ifndef _ASM_SH_HD64465_ -#define _ASM_SH_HD64465_ 1 -/* - * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $ - * - * Hitachi HD64465 companion chip support - * - * by Greg Banks - * (c) 2000 PocketPenguins Inc. - * - * Derived from which bore the message: - * Copyright (C) 2000 YAEGASHI Takeshi - */ -#include -#include - -/* - * Note that registers are defined here as virtual port numbers, - * which have no meaning except to get translated by hd64465_isa_port2addr() - * to an address in the range 0xb0000000-0xb3ffffff. Note that - * this translation happens to consist of adding the lower 16 bits - * of the virtual port number to 0xb0000000. Note also that the manual - * shows addresses as absolute physical addresses starting at 0x10000000, - * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the - * manual, and accessed using address 0xb0005000 - Greg. - */ - -/* System registers */ -#define HD64465_REG_SRR 0x1000c /* System Revision Register */ -#define HD64465_REG_SDID 0x10010 /* System Device ID Reg */ -#define HD64465_SDID 0x8122 /* 64465 device ID */ - -/* Power Management registers */ -#define HD64465_REG_SMSCR 0x10000 /* System Module Standby Control Reg */ -#define HD64465_SMSCR_PS2ST 0x4000 /* PS/2 Standby */ -#define HD64465_SMSCR_ADCST 0x1000 /* ADC Standby */ -#define HD64465_SMSCR_UARTST 0x0800 /* UART Standby */ -#define HD64465_SMSCR_SCDIST 0x0200 /* Serial Codec Standby */ -#define HD64465_SMSCR_PPST 0x0100 /* Parallel Port Standby */ -#define HD64465_SMSCR_PC0ST 0x0040 /* PCMCIA0 Standby */ -#define HD64465_SMSCR_PC1ST 0x0020 /* PCMCIA1 Standby */ -#define HD64465_SMSCR_AFEST 0x0010 /* AFE Standby */ -#define HD64465_SMSCR_TM0ST 0x0008 /* Timer0 Standby */ -#define HD64465_SMSCR_TM1ST 0x0004 /* Timer1 Standby */ -#define HD64465_SMSCR_IRDAST 0x0002 /* IRDA Standby */ -#define HD64465_SMSCR_KBCST 0x0001 /* Keyboard Controller Standby */ - -/* Interrupt Controller registers */ -#define HD64465_REG_NIRR 0x15000 /* Interrupt Request Register */ -#define HD64465_REG_NIMR 0x15002 /* Interrupt Mask Register */ -#define HD64465_REG_NITR 0x15004 /* Interrupt Trigger Mode Register */ - -/* Timer registers */ -#define HD64465_REG_TCVR1 0x16000 /* Timer 1 constant value register */ -#define HD64465_REG_TCVR0 0x16002 /* Timer 0 constant value register */ -#define HD64465_REG_TRVR1 0x16004 /* Timer 1 read value register */ -#define HD64465_REG_TRVR0 0x16006 /* Timer 0 read value register */ -#define HD64465_REG_TCR1 0x16008 /* Timer 1 control register */ -#define HD64465_REG_TCR0 0x1600A /* Timer 0 control register */ -#define HD64465_TCR_EADT 0x10 /* Enable ADTRIG# signal */ -#define HD64465_TCR_ETMO 0x08 /* Enable TMO signal */ -#define HD64465_TCR_PST_MASK 0x06 /* Clock Prescale */ -#define HD64465_TCR_PST_1 0x06 /* 1:1 */ -#define HD64465_TCR_PST_4 0x04 /* 1:4 */ -#define HD64465_TCR_PST_8 0x02 /* 1:8 */ -#define HD64465_TCR_PST_16 0x00 /* 1:16 */ -#define HD64465_TCR_TSTP 0x01 /* Start/Stop timer */ -#define HD64465_REG_TIRR 0x1600C /* Timer interrupt request register */ -#define HD64465_REG_TIDR 0x1600E /* Timer interrupt disable register */ -#define HD64465_REG_PWM1CS 0x16010 /* PWM 1 clock scale register */ -#define HD64465_REG_PWM1LPC 0x16012 /* PWM 1 low pulse width counter register */ -#define HD64465_REG_PWM1HPC 0x16014 /* PWM 1 high pulse width counter register */ -#define HD64465_REG_PWM0CS 0x16018 /* PWM 0 clock scale register */ -#define HD64465_REG_PWM0LPC 0x1601A /* PWM 0 low pulse width counter register */ -#define HD64465_REG_PWM0HPC 0x1601C /* PWM 0 high pulse width counter register */ - -/* Analog/Digital Converter registers */ -#define HD64465_REG_ADDRA 0x1E000 /* A/D data register A */ -#define HD64465_REG_ADDRB 0x1E002 /* A/D data register B */ -#define HD64465_REG_ADDRC 0x1E004 /* A/D data register C */ -#define HD64465_REG_ADDRD 0x1E006 /* A/D data register D */ -#define HD64465_REG_ADCSR 0x1E008 /* A/D control/status register */ -#define HD64465_ADCSR_ADF 0x80 /* A/D End Flag */ -#define HD64465_ADCSR_ADST 0x40 /* A/D Start Flag */ -#define HD64465_ADCSR_ADIS 0x20 /* A/D Interrupt Status */ -#define HD64465_ADCSR_TRGE 0x10 /* A/D Trigger Enable */ -#define HD64465_ADCSR_ADIE 0x08 /* A/D Interrupt Enable */ -#define HD64465_ADCSR_SCAN 0x04 /* A/D Scan Mode */ -#define HD64465_ADCSR_CH_MASK 0x03 /* A/D Channel */ -#define HD64465_REG_ADCALCR 0x1E00A /* A/D calibration sample control */ -#define HD64465_REG_ADCAL 0x1E00C /* A/D calibration data register */ - - -/* General Purpose I/O ports registers */ -#define HD64465_REG_GPACR 0x14000 /* Port A Control Register */ -#define HD64465_REG_GPBCR 0x14002 /* Port B Control Register */ -#define HD64465_REG_GPCCR 0x14004 /* Port C Control Register */ -#define HD64465_REG_GPDCR 0x14006 /* Port D Control Register */ -#define HD64465_REG_GPECR 0x14008 /* Port E Control Register */ -#define HD64465_REG_GPADR 0x14010 /* Port A Data Register */ -#define HD64465_REG_GPBDR 0x14012 /* Port B Data Register */ -#define HD64465_REG_GPCDR 0x14014 /* Port C Data Register */ -#define HD64465_REG_GPDDR 0x14016 /* Port D Data Register */ -#define HD64465_REG_GPEDR 0x14018 /* Port E Data Register */ -#define HD64465_REG_GPAICR 0x14020 /* Port A Interrupt Control Register */ -#define HD64465_REG_GPBICR 0x14022 /* Port B Interrupt Control Register */ -#define HD64465_REG_GPCICR 0x14024 /* Port C Interrupt Control Register */ -#define HD64465_REG_GPDICR 0x14026 /* Port D Interrupt Control Register */ -#define HD64465_REG_GPEICR 0x14028 /* Port E Interrupt Control Register */ -#define HD64465_REG_GPAISR 0x14040 /* Port A Interrupt Status Register */ -#define HD64465_REG_GPBISR 0x14042 /* Port B Interrupt Status Register */ -#define HD64465_REG_GPCISR 0x14044 /* Port C Interrupt Status Register */ -#define HD64465_REG_GPDISR 0x14046 /* Port D Interrupt Status Register */ -#define HD64465_REG_GPEISR 0x14048 /* Port E Interrupt Status Register */ - -/* PCMCIA bridge interface */ -#define HD64465_REG_PCC0ISR 0x12000 /* socket 0 interface status */ -#define HD64465_PCCISR_PREADY 0x80 /* mem card ready / io card IREQ */ -#define HD64465_PCCISR_PIREQ 0x80 -#define HD64465_PCCISR_PMWP 0x40 /* mem card write-protected */ -#define HD64465_PCCISR_PVS2 0x20 /* voltage select pin 2 */ -#define HD64465_PCCISR_PVS1 0x10 /* voltage select pin 1 */ -#define HD64465_PCCISR_PCD_MASK 0x0c /* card detect */ -#define HD64465_PCCISR_PBVD_MASK 0x03 /* battery voltage */ -#define HD64465_PCCISR_PBVD_BATGOOD 0x03 /* battery good */ -#define HD64465_PCCISR_PBVD_BATWARN 0x01 /* battery low warning */ -#define HD64465_PCCISR_PBVD_BATDEAD1 0x02 /* battery dead */ -#define HD64465_PCCISR_PBVD_BATDEAD2 0x00 /* battery dead */ -#define HD64465_REG_PCC0GCR 0x12002 /* socket 0 general control */ -#define HD64465_PCCGCR_PDRV 0x80 /* output drive */ -#define HD64465_PCCGCR_PCCR 0x40 /* PC card reset */ -#define HD64465_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ -#define HD64465_PCCGCR_PVCC0 0x10 /* voltage control pin VCC0SEL0 */ -#define HD64465_PCCGCR_PMMOD 0x08 /* memory mode */ -#define HD64465_PCCGCR_PPA25 0x04 /* pin A25 */ -#define HD64465_PCCGCR_PPA24 0x02 /* pin A24 */ -#define HD64465_PCCGCR_PREG 0x01 /* ping PCC0REG# */ -#define HD64465_REG_PCC0CSCR 0x12004 /* socket 0 card status change */ -#define HD64465_PCCCSCR_PSCDI 0x80 /* sw card detect intr */ -#define HD64465_PCCCSCR_PSWSEL 0x40 /* power select */ -#define HD64465_PCCCSCR_PIREQ 0x20 /* IREQ intr req */ -#define HD64465_PCCCSCR_PSC 0x10 /* STSCHG (status change) pin */ -#define HD64465_PCCCSCR_PCDC 0x08 /* CD (card detect) change */ -#define HD64465_PCCCSCR_PRC 0x04 /* ready change */ -#define HD64465_PCCCSCR_PBW 0x02 /* battery warning change */ -#define HD64465_PCCCSCR_PBD 0x01 /* battery dead change */ -#define HD64465_REG_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */ -#define HD64465_PCCCSCIER_PCRE 0x80 /* change reset enable */ -#define HD64465_PCCCSCIER_PIREQE_MASK 0x60 /* IREQ enable */ -#define HD64465_PCCCSCIER_PIREQE_DISABLED 0x00 /* IREQ disabled */ -#define HD64465_PCCCSCIER_PIREQE_LEVEL 0x20 /* IREQ level-triggered */ -#define HD64465_PCCCSCIER_PIREQE_FALLING 0x40 /* IREQ falling-edge-trig */ -#define HD64465_PCCCSCIER_PIREQE_RISING 0x60 /* IREQ rising-edge-trig */ -#define HD64465_PCCCSCIER_PSCE 0x10 /* status change enable */ -#define HD64465_PCCCSCIER_PCDE 0x08 /* card detect change enable */ -#define HD64465_PCCCSCIER_PRE 0x04 /* ready change enable */ -#define HD64465_PCCCSCIER_PBWE 0x02 /* battery warn change enable */ -#define HD64465_PCCCSCIER_PBDE 0x01 /* battery dead change enable*/ -#define HD64465_REG_PCC0SCR 0x12008 /* socket 0 software control */ -#define HD64465_PCCSCR_SHDN 0x10 /* TPS2206 SHutDowN pin */ -#define HD64465_PCCSCR_SWP 0x01 /* write protect */ -#define HD64465_REG_PCCPSR 0x1200A /* serial power switch control */ -#define HD64465_REG_PCC1ISR 0x12010 /* socket 1 interface status */ -#define HD64465_REG_PCC1GCR 0x12012 /* socket 1 general control */ -#define HD64465_REG_PCC1CSCR 0x12014 /* socket 1 card status change */ -#define HD64465_REG_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */ -#define HD64465_REG_PCC1SCR 0x12018 /* socket 1 software control */ - - -/* PS/2 Keyboard and mouse controller -- *not* register compatible */ -#define HD64465_REG_KBCSR 0x1dc00 /* Keyboard Control/Status reg */ -#define HD64465_KBCSR_KBCIE 0x8000 /* KBCK Input Enable */ -#define HD64465_KBCSR_KBCOE 0x4000 /* KBCK Output Enable */ -#define HD64465_KBCSR_KBDOE 0x2000 /* KB DATA Output Enable */ -#define HD64465_KBCSR_KBCD 0x1000 /* KBCK Driven */ -#define HD64465_KBCSR_KBDD 0x0800 /* KB DATA Driven */ -#define HD64465_KBCSR_KBCS 0x0400 /* KBCK pin Status */ -#define HD64465_KBCSR_KBDS 0x0200 /* KB DATA pin Status */ -#define HD64465_KBCSR_KBDP 0x0100 /* KB DATA Parity bit */ -#define HD64465_KBCSR_KBD_MASK 0x00ff /* KD DATA shift reg */ -#define HD64465_REG_KBISR 0x1dc04 /* Keyboard Interrupt Status reg */ -#define HD64465_KBISR_KBRDF 0x0001 /* KB Received Data Full */ -#define HD64465_REG_MSCSR 0x1dc10 /* Mouse Control/Status reg */ -#define HD64465_REG_MSISR 0x1dc14 /* Mouse Interrupt Status reg */ - - -/* - * Logical address at which the HD64465 is mapped. Note that this - * should always be in the P2 segment (uncached and untranslated). - */ -#ifndef CONFIG_HD64465_IOBASE -#define CONFIG_HD64465_IOBASE 0xb0000000 -#endif -/* - * The HD64465 multiplexes all its modules' interrupts onto - * this single interrupt. - */ -#ifndef CONFIG_HD64465_IRQ -#define CONFIG_HD64465_IRQ 5 -#endif - - -#define _HD64465_IO_MASK 0xf8000000 -#define is_hd64465_addr(addr) \ - ((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK)) - -/* - * A range of 16 virtual interrupts generated by - * demuxing the HD64465 muxed interrupt. - */ -#define HD64465_IRQ_BASE OFFCHIP_IRQ_BASE -#define HD64465_IRQ_NUM 16 -#define HD64465_IRQ_ADC (HD64465_IRQ_BASE+0) -#define HD64465_IRQ_USB (HD64465_IRQ_BASE+1) -#define HD64465_IRQ_SCDI (HD64465_IRQ_BASE+2) -#define HD64465_IRQ_PARALLEL (HD64465_IRQ_BASE+3) -/* bit 4 is reserved */ -#define HD64465_IRQ_UART (HD64465_IRQ_BASE+5) -#define HD64465_IRQ_IRDA (HD64465_IRQ_BASE+6) -#define HD64465_IRQ_PS2MOUSE (HD64465_IRQ_BASE+7) -#define HD64465_IRQ_KBC (HD64465_IRQ_BASE+8) -#define HD64465_IRQ_TIMER1 (HD64465_IRQ_BASE+9) -#define HD64465_IRQ_TIMER0 (HD64465_IRQ_BASE+10) -#define HD64465_IRQ_GPIO (HD64465_IRQ_BASE+11) -#define HD64465_IRQ_AFE (HD64465_IRQ_BASE+12) -#define HD64465_IRQ_PCMCIA1 (HD64465_IRQ_BASE+13) -#define HD64465_IRQ_PCMCIA0 (HD64465_IRQ_BASE+14) -#define HD64465_IRQ_PS2KBD (HD64465_IRQ_BASE+15) - -/* Constants for PCMCIA mappings */ -#define HD64465_PCC_WINDOW 0x01000000 - -#define HD64465_PCC0_BASE 0xb8000000 /* area 6 */ -#define HD64465_PCC0_ATTR (HD64465_PCC0_BASE) -#define HD64465_PCC0_COMM (HD64465_PCC0_BASE+HD64465_PCC_WINDOW) -#define HD64465_PCC0_IO (HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW) - -#define HD64465_PCC1_BASE 0xb4000000 /* area 5 */ -#define HD64465_PCC1_ATTR (HD64465_PCC1_BASE) -#define HD64465_PCC1_COMM (HD64465_PCC1_BASE+HD64465_PCC_WINDOW) -#define HD64465_PCC1_IO (HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW) - -/* - * Base of USB controller interface (as memory) - */ -#define HD64465_USB_BASE (CONFIG_HD64465_IOBASE+0xb000) -#define HD64465_USB_LEN 0x1000 -/* - * Base of embedded SRAM, used for USB controller. - */ -#define HD64465_SRAM_BASE (CONFIG_HD64465_IOBASE+0x9000) -#define HD64465_SRAM_LEN 0x1000 - - - -#endif /* _ASM_SH_HD64465_ */ diff --git a/arch/sh/include/asm/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h deleted file mode 100644 index 139f1472e5bb..000000000000 --- a/arch/sh/include/asm/hd64465/io.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-sh/hd64465/io.h - * - * By Greg Banks - * (c) 2000 PocketPenguins Inc. - * - * Derived from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller". - */ - -#ifndef _ASM_SH_IO_HD64465_H -#define _ASM_SH_IO_HD64465_H - -extern unsigned char hd64465_inb(unsigned long port); -extern unsigned short hd64465_inw(unsigned long port); -extern unsigned int hd64465_inl(unsigned long port); - -extern void hd64465_outb(unsigned char value, unsigned long port); -extern void hd64465_outw(unsigned short value, unsigned long port); -extern void hd64465_outl(unsigned int value, unsigned long port); - -extern unsigned char hd64465_inb_p(unsigned long port); -extern void hd64465_outb_p(unsigned char value, unsigned long port); - -extern unsigned long hd64465_isa_port2addr(unsigned long offset); -extern int hd64465_irq_demux(int irq); -/* Provision for generic secondary demux step -- used by PCMCIA code */ -extern void hd64465_register_irq_demux(int irq, - int (*demux)(int irq, void *dev), void *dev); -extern void hd64465_unregister_irq_demux(int irq); -/* Set this variable to 1 to see port traffic */ -extern int hd64465_io_debug; -/* Map a range of ports to a range of kernel virtual memory. - */ -extern void hd64465_port_map(unsigned short baseport, unsigned int nports, - unsigned long addr, unsigned char shift); -extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports); - -#endif /* _ASM_SH_IO_HD64465_H */ diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h index e13cc948ee60..11f854dd1363 100644 --- a/arch/sh/include/asm/serial.h +++ b/arch/sh/include/asm/serial.h @@ -7,8 +7,6 @@ #ifndef _ASM_SERIAL_H #define _ASM_SERIAL_H -#include - /* * This assumes you have a 1.8432 MHz clock for your UART. * @@ -18,19 +16,4 @@ */ #define BASE_BAUD ( 1843200 / 16 ) -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -#ifdef CONFIG_HD64465 -#include - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ - -#else - -#define SERIAL_PORT_DFNS - -#endif - #endif /* _ASM_SERIAL_H */ diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index d4fb11f7e2ee..d0c2928d1066 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -13,7 +13,6 @@ RTS7751R2D SH_RTS7751R2D # List of companion chips / MFDs. # HD64461 HD64461 -HD64465 HD64465 # # List of boards. diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index f57eeae3830a..222904411a13 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -188,10 +188,6 @@ config PCMCIA_M8XX This driver is also available as a module called m8xx_pcmcia. -config HD64465_PCMCIA - tristate "HD64465 host bridge support" - depends on HD64465 && PCMCIA - config PCMCIA_AU1X00 tristate "Au1x00 pcmcia support" depends on SOC_AU1X00 && PCMCIA diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 23e492bf75cf..238629ad7f7c 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -22,7 +22,6 @@ obj-$(CONFIG_I82365) += i82365.o obj-$(CONFIG_I82092) += i82092.o obj-$(CONFIG_TCIC) += tcic.o obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o -obj-$(CONFIG_HD64465_PCMCIA) += hd64465_ss.o obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_core.o sa1100_cs.o obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o obj-$(CONFIG_M32R_PCC) += m32r_pcc.o diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c deleted file mode 100644 index 9ef69cdb3183..000000000000 --- a/drivers/pcmcia/hd64465_ss.c +++ /dev/null @@ -1,939 +0,0 @@ -/* - * Device driver for the PCMCIA controller module of the - * Hitachi HD64465 handheld companion chip. - * - * Note that the HD64465 provides a very thin PCMCIA host bridge - * layer, requiring a lot of the work of supporting cards to be - * performed by the processor. For example: mapping of card - * interrupts to processor IRQs is done by IRQ demuxing software; - * IO and memory mappings are fixed; setting voltages according - * to card Voltage Select pins etc is done in software. - * - * Note also that this driver uses only the simple, fixed, - * 16MB, 16-bit wide mappings to PCMCIA spaces defined by the - * HD64465. Larger mappings, smaller mappings, or mappings of - * different width to the same socket, are all possible only by - * involving the SH7750's MMU, which is considered unnecessary here. - * The downside is that it may be possible for some drivers to - * break because they need or expect 8-bit mappings. - * - * This driver currently supports only the following configuration: - * SH7750 CPU, HD64465, TPS2206 voltage control chip. - * - * by Greg Banks - * (c) 2000 PocketPenguins Inc - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#define MODNAME "hd64465_ss" - -/* #define HD64465_DEBUG 1 */ - -#if HD64465_DEBUG -#define DPRINTK(args...) printk(MODNAME ": " args) -#else -#define DPRINTK(args...) -#endif - -extern int hd64465_io_debug; -extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags); -extern void p3_iounmap(void *addr); - -/*============================================================*/ - -#define HS_IO_MAP_SIZE (64*1024) - -typedef struct hs_socket_t -{ - unsigned int number; - u_int irq; - u_long mem_base; - void *io_base; - u_long mem_length; - u_int ctrl_base; - socket_state_t state; - pccard_io_map io_maps[MAX_IO_WIN]; - pccard_mem_map mem_maps[MAX_WIN]; - struct pcmcia_socket socket; -} hs_socket_t; - - - -#define HS_MAX_SOCKETS 2 -static hs_socket_t hs_sockets[HS_MAX_SOCKETS]; - -#define hs_in(sp, r) inb((sp)->ctrl_base + (r)) -#define hs_out(sp, v, r) outb(v, (sp)->ctrl_base + (r)) - - -/* translate a boolean value to a bit in a register */ -#define bool_to_regbit(sp, r, bi, bo) \ - do { \ - unsigned short v = hs_in(sp, r); \ - if (bo) \ - v |= (bi); \ - else \ - v &= ~(bi); \ - hs_out(sp, v, r); \ - } while(0) - -/* register offsets from HD64465_REG_PCC[01]ISR */ -#define ISR 0x0 -#define GCR 0x2 -#define CSCR 0x4 -#define CSCIER 0x6 -#define SCR 0x8 - - -/* Mask and values for CSCIER register */ -#define IER_MASK 0x80 -#define IER_ON 0x3f /* interrupts on */ -#define IER_OFF 0x00 /* interrupts off */ - -/*============================================================*/ - -#if HD64465_DEBUG > 10 - -static void cis_hex_dump(const unsigned char *x, int len) -{ - int i; - - for (i=0 ; inumber); - - cscier = hs_in(sp, CSCIER); - cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK; - cscier |= HD64465_PCCCSCIER_PIREQE_LEVEL; - hs_out(sp, cscier, CSCIER); -} - -static void hs_socket_disable_ireq(hs_socket_t *sp) -{ - unsigned short cscier; - - DPRINTK("hs_socket_disable_ireq(sock=%d)\n", sp->number); - - cscier = hs_in(sp, CSCIER); - cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK; - hs_out(sp, cscier, CSCIER); -} - -static unsigned int hs_startup_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->startup(irq); - return 0; -} - -static void hs_shutdown_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->shutdown(irq); -} - -static void hs_enable_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->enable(irq); -} - -static void hs_disable_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->disable(irq); -} - -extern struct hw_interrupt_type no_irq_type; - -static void hs_mask_and_ack_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - /* ack_none() spuriously complains about an unexpected IRQ */ - if (hs_mapped_irq[irq].old_handler != &no_irq_type) - hs_mapped_irq[irq].old_handler->ack(irq); -} - -static void hs_end_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->end(irq); -} - - -static struct hw_interrupt_type hd64465_ss_irq_type = { - .typename = "PCMCIA-IRQ", - .startup = hs_startup_irq, - .shutdown = hs_shutdown_irq, - .enable = hs_enable_irq, - .disable = hs_disable_irq, - .ack = hs_mask_and_ack_irq, - .end = hs_end_irq -}; - -/* - * This function should only ever be called with interrupts disabled. - */ -static void hs_map_irq(hs_socket_t *sp, unsigned int irq) -{ - struct irq_desc *desc; - - DPRINTK("hs_map_irq(sock=%d irq=%d)\n", sp->number, irq); - - if (irq >= HS_NUM_MAPPED_IRQS) - return; - - desc = irq_to_desc(irq); - hs_mapped_irq[irq].sock = sp; - /* insert ourselves as the irq controller */ - hs_mapped_irq[irq].old_handler = desc->chip; - desc->chip = &hd64465_ss_irq_type; -} - - -/* - * This function should only ever be called with interrupts disabled. - */ -static void hs_unmap_irq(hs_socket_t *sp, unsigned int irq) -{ - struct irq_desc *desc; - - DPRINTK("hs_unmap_irq(sock=%d irq=%d)\n", sp->number, irq); - - if (irq >= HS_NUM_MAPPED_IRQS) - return; - - desc = irq_to_desc(irq); - /* restore the original irq controller */ - desc->chip = hs_mapped_irq[irq].old_handler; -} - -/*============================================================*/ - - -/* - * Set Vpp and Vcc (in tenths of a Volt). Does not - * support the hi-Z state. - * - * Note, this assumes the board uses a TPS2206 chip to control - * the Vcc and Vpp voltages to the hs_sockets. If your board - * uses the MIC2563 (also supported by the HD64465) then you - * will have to modify this function. - */ - /* 0V 3.3V 5.5V */ -static const u_char hs_tps2206_avcc[3] = { 0x00, 0x04, 0x08 }; -static const u_char hs_tps2206_bvcc[3] = { 0x00, 0x80, 0x40 }; - -static int hs_set_voltages(hs_socket_t *sp, int Vcc, int Vpp) -{ - u_int psr; - u_int vcci = 0; - u_int sock = sp->number; - - DPRINTK("hs_set_voltage(%d, %d, %d)\n", sock, Vcc, Vpp); - - switch (Vcc) - { - case 0: vcci = 0; break; - case 33: vcci = 1; break; - case 50: vcci = 2; break; - default: return 0; - } - - /* Note: Vpp = 120 not supported -- Greg Banks */ - if (Vpp != 0 && Vpp != Vcc) - return 0; - - /* The PSR register holds 8 of the 9 bits which control - * the TPS2206 via its serial interface. - */ - psr = inw(HD64465_REG_PCCPSR); - switch (sock) - { - case 0: - psr &= 0x0f; - psr |= hs_tps2206_avcc[vcci]; - psr |= (Vpp == 0 ? 0x00 : 0x02); - break; - case 1: - psr &= 0xf0; - psr |= hs_tps2206_bvcc[vcci]; - psr |= (Vpp == 0 ? 0x00 : 0x20); - break; - }; - outw(psr, HD64465_REG_PCCPSR); - - return 1; -} - - -/*============================================================*/ - -/* - * Drive the RESET line to the card. - */ -static void hs_reset_socket(hs_socket_t *sp, int on) -{ - unsigned short v; - - v = hs_in(sp, GCR); - if (on) - v |= HD64465_PCCGCR_PCCR; - else - v &= ~HD64465_PCCGCR_PCCR; - hs_out(sp, v, GCR); -} - -/*============================================================*/ - -static int hs_init(struct pcmcia_socket *s) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - - DPRINTK("hs_init(%d)\n", sp->number); - - return 0; -} - -/*============================================================*/ - - -static int hs_get_status(struct pcmcia_socket *s, u_int *value) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - unsigned int isr; - u_int status = 0; - - - isr = hs_in(sp, ISR); - - /* Card is seated and powered when *both* CD pins are low */ - if ((isr & HD64465_PCCISR_PCD_MASK) == 0) - { - status |= SS_DETECT; /* card present */ - - switch (isr & HD64465_PCCISR_PBVD_MASK) - { - case HD64465_PCCISR_PBVD_BATGOOD: - break; - case HD64465_PCCISR_PBVD_BATWARN: - status |= SS_BATWARN; - break; - default: - status |= SS_BATDEAD; - break; - } - - if (isr & HD64465_PCCISR_PREADY) - status |= SS_READY; - - if (isr & HD64465_PCCISR_PMWP) - status |= SS_WRPROT; - - /* Voltage Select pins interpreted as per Table 4-5 of the std. - * Assuming we have the TPS2206, the socket is a "Low Voltage - * key, 3.3V and 5V available, no X.XV available". - */ - switch (isr & (HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1)) - { - case HD64465_PCCISR_PVS1: - printk(KERN_NOTICE MODNAME ": cannot handle X.XV card, ignored\n"); - status = 0; - break; - case 0: - case HD64465_PCCISR_PVS2: - /* 3.3V */ - status |= SS_3VCARD; - break; - case HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1: - /* 5V */ - break; - } - - /* TODO: SS_POWERON */ - /* TODO: SS_STSCHG */ - } - - DPRINTK("hs_get_status(%d) = %x\n", sock, status); - - *value = status; - return 0; -} - -/*============================================================*/ - -static int hs_set_socket(struct pcmcia_socket *s, socket_state_t *state) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - u_long flags; - u_int changed; - unsigned short cscier; - - DPRINTK("hs_set_socket(sock=%d, flags=%x, csc_mask=%x, Vcc=%d, Vpp=%d, io_irq=%d)\n", - sock, state->flags, state->csc_mask, state->Vcc, state->Vpp, state->io_irq); - - local_irq_save(flags); /* Don't want interrupts happening here */ - - if (state->Vpp != sp->state.Vpp || - state->Vcc != sp->state.Vcc) { - if (!hs_set_voltages(sp, state->Vcc, state->Vpp)) { - local_irq_restore(flags); - return -EINVAL; - } - } - -/* hd64465_io_debug = 1; */ - /* - * Handle changes in the Card Status Change mask, - * by propagating to the CSCR register - */ - changed = sp->state.csc_mask ^ state->csc_mask; - cscier = hs_in(sp, CSCIER); - - if (changed & SS_DETECT) { - if (state->csc_mask & SS_DETECT) - cscier |= HD64465_PCCCSCIER_PCDE; - else - cscier &= ~HD64465_PCCCSCIER_PCDE; - } - - if (changed & SS_READY) { - if (state->csc_mask & SS_READY) - cscier |= HD64465_PCCCSCIER_PRE; - else - cscier &= ~HD64465_PCCCSCIER_PRE; - } - - if (changed & SS_BATDEAD) { - if (state->csc_mask & SS_BATDEAD) - cscier |= HD64465_PCCCSCIER_PBDE; - else - cscier &= ~HD64465_PCCCSCIER_PBDE; - } - - if (changed & SS_BATWARN) { - if (state->csc_mask & SS_BATWARN) - cscier |= HD64465_PCCCSCIER_PBWE; - else - cscier &= ~HD64465_PCCCSCIER_PBWE; - } - - if (changed & SS_STSCHG) { - if (state->csc_mask & SS_STSCHG) - cscier |= HD64465_PCCCSCIER_PSCE; - else - cscier &= ~HD64465_PCCCSCIER_PSCE; - } - - hs_out(sp, cscier, CSCIER); - - if (sp->state.io_irq && !state->io_irq) - hs_unmap_irq(sp, sp->state.io_irq); - else if (!sp->state.io_irq && state->io_irq) - hs_map_irq(sp, state->io_irq); - - - /* - * Handle changes in the flags field, - * by propagating to config registers. - */ - changed = sp->state.flags ^ state->flags; - - if (changed & SS_IOCARD) { - DPRINTK("card type: %s\n", - (state->flags & SS_IOCARD ? "i/o" : "memory" )); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCT, - state->flags & SS_IOCARD); - } - - if (changed & SS_RESET) { - DPRINTK("%s reset card\n", - (state->flags & SS_RESET ? "start" : "stop")); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCR, - state->flags & SS_RESET); - } - - if (changed & SS_OUTPUT_ENA) { - DPRINTK("%sabling card output\n", - (state->flags & SS_OUTPUT_ENA ? "en" : "dis")); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PDRV, - state->flags & SS_OUTPUT_ENA); - } - - /* TODO: SS_SPKR_ENA */ - -/* hd64465_io_debug = 0; */ - sp->state = *state; - - local_irq_restore(flags); - -#if HD64465_DEBUG > 10 - if (state->flags & SS_OUTPUT_ENA) - cis_hex_dump((const unsigned char*)sp->mem_base, 0x100); -#endif - return 0; -} - -/*============================================================*/ - -static int hs_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - int map = io->map; - int sock = sp->number; - struct pccard_io_map *sio; - pgprot_t prot; - - DPRINTK("hs_set_io_map(sock=%d, map=%d, flags=0x%x, speed=%dns, start=%#lx, stop=%#lx)\n", - sock, map, io->flags, io->speed, io->start, io->stop); - if (map >= MAX_IO_WIN) - return -EINVAL; - sio = &sp->io_maps[map]; - - /* check for null changes */ - if (io->flags == sio->flags && - io->start == sio->start && - io->stop == sio->stop) - return 0; - - if (io->flags & MAP_AUTOSZ) - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IODYN); - else if (io->flags & MAP_16BIT) - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO16); - else - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO8); - - /* TODO: handle MAP_USE_WAIT */ - if (io->flags & MAP_USE_WAIT) - printk(KERN_INFO MODNAME ": MAP_USE_WAIT unimplemented\n"); - /* TODO: handle MAP_PREFETCH */ - if (io->flags & MAP_PREFETCH) - printk(KERN_INFO MODNAME ": MAP_PREFETCH unimplemented\n"); - /* TODO: handle MAP_WRPROT */ - if (io->flags & MAP_WRPROT) - printk(KERN_INFO MODNAME ": MAP_WRPROT unimplemented\n"); - /* TODO: handle MAP_0WS */ - if (io->flags & MAP_0WS) - printk(KERN_INFO MODNAME ": MAP_0WS unimplemented\n"); - - if (io->flags & MAP_ACTIVE) { - unsigned long pstart, psize, paddrbase; - - paddrbase = virt_to_phys((void*)(sp->mem_base + 2 * HD64465_PCC_WINDOW)); - pstart = io->start & PAGE_MASK; - psize = ((io->stop + PAGE_SIZE) & PAGE_MASK) - pstart; - - /* - * Change PTEs in only that portion of the mapping requested - * by the caller. This means that most of the time, most of - * the PTEs in the io_vma will be unmapped and only the bottom - * page will be mapped. But the code allows for weird cards - * that might want IO ports > 4K. - */ - sp->io_base = p3_ioremap(paddrbase + pstart, psize, pgprot_val(prot)); - - /* - * Change the mapping used by inb() outb() etc - */ - hd64465_port_map(io->start, - io->stop - io->start + 1, - (unsigned long)sp->io_base + io->start, 0); - } else { - hd64465_port_unmap(sio->start, sio->stop - sio->start + 1); - p3_iounmap(sp->io_base); - } - - *sio = *io; - return 0; -} - -/*============================================================*/ - -static int hs_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *mem) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - struct pccard_mem_map *smem; - int map = mem->map; - unsigned long paddr; - -#if 0 - DPRINTK("hs_set_mem_map(sock=%d, map=%d, flags=0x%x, card_start=0x%08x)\n", - sock, map, mem->flags, mem->card_start); -#endif - - if (map >= MAX_WIN) - return -EINVAL; - smem = &sp->mem_maps[map]; - - paddr = sp->mem_base; /* base of Attribute mapping */ - if (!(mem->flags & MAP_ATTRIB)) - paddr += HD64465_PCC_WINDOW; /* base of Common mapping */ - paddr += mem->card_start; - - /* Because we specified SS_CAP_STATIC_MAP, we are obliged - * at this time to report the system address corresponding - * to the card address requested. This is how Socket Services - * queries our fixed mapping. I wish this fact had been - * documented - Greg Banks. - */ - mem->static_start = paddr; - - *smem = *mem; - - return 0; -} - -/* TODO: do we need to use the MMU to access Common memory ??? */ - -/*============================================================*/ - -/* - * This function is registered with the HD64465 glue code to do a - * secondary demux step on the PCMCIA interrupts. It handles - * mapping the IREQ request from the card to a standard Linux - * IRQ, as requested by SocketServices. - */ -static int hs_irq_demux(int irq, void *dev) -{ - hs_socket_t *sp = dev; - u_int cscr; - - DPRINTK("hs_irq_demux(irq=%d)\n", irq); - - if (sp->state.io_irq && - (cscr = hs_in(sp, CSCR)) & HD64465_PCCCSCR_PIREQ) { - cscr &= ~HD64465_PCCCSCR_PIREQ; - hs_out(sp, cscr, CSCR); - return sp->state.io_irq; - } - - return irq; -} - -/*============================================================*/ - -/* - * Interrupt handling routine. - */ - -static irqreturn_t hs_interrupt(int irq, void *dev) -{ - hs_socket_t *sp = dev; - u_int events = 0; - u_int cscr; - - cscr = hs_in(sp, CSCR); - - DPRINTK("hs_interrupt, cscr=%04x\n", cscr); - - /* check for bus-related changes to be reported to Socket Services */ - if (cscr & HD64465_PCCCSCR_PCDC) { - /* double-check for a 16-bit card, as we don't support CardBus */ - if ((hs_in(sp, ISR) & HD64465_PCCISR_PCD_MASK) != 0) { - printk(KERN_NOTICE MODNAME - ": socket %d, card not a supported card type or not inserted correctly\n", - sp->number); - /* Don't do the rest unless a card is present */ - cscr &= ~(HD64465_PCCCSCR_PCDC| - HD64465_PCCCSCR_PRC| - HD64465_PCCCSCR_PBW| - HD64465_PCCCSCR_PBD| - HD64465_PCCCSCR_PSC); - } else { - cscr &= ~HD64465_PCCCSCR_PCDC; - events |= SS_DETECT; /* card insertion or removal */ - } - } - if (cscr & HD64465_PCCCSCR_PRC) { - cscr &= ~HD64465_PCCCSCR_PRC; - events |= SS_READY; /* ready signal changed */ - } - if (cscr & HD64465_PCCCSCR_PBW) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_BATWARN; /* battery warning */ - } - if (cscr & HD64465_PCCCSCR_PBD) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_BATDEAD; /* battery dead */ - } - if (cscr & HD64465_PCCCSCR_PSC) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_STSCHG; /* STSCHG (status changed) signal */ - } - - if (cscr & HD64465_PCCCSCR_PIREQ) { - cscr &= ~HD64465_PCCCSCR_PIREQ; - - /* This should have been dealt with during irq demux */ - printk(KERN_NOTICE MODNAME ": unexpected IREQ from card\n"); - } - - hs_out(sp, cscr, CSCR); - - if (events) - pcmcia_parse_events(&sp->socket, events); - - return IRQ_HANDLED; -} - -/*============================================================*/ - -static struct pccard_operations hs_operations = { - .init = hs_init, - .get_status = hs_get_status, - .set_socket = hs_set_socket, - .set_io_map = hs_set_io_map, - .set_mem_map = hs_set_mem_map, -}; - -static int hs_init_socket(hs_socket_t *sp, int irq, unsigned long mem_base, - unsigned int ctrl_base) -{ - unsigned short v; - int i, err; - - memset(sp, 0, sizeof(*sp)); - sp->irq = irq; - sp->mem_base = mem_base; - sp->mem_length = 4*HD64465_PCC_WINDOW; /* 16MB */ - sp->ctrl_base = ctrl_base; - - for (i=0 ; iio_maps[i].map = i; - for (i=0 ; imem_maps[i].map = i; - - hd64465_register_irq_demux(sp->irq, hs_irq_demux, sp); - - if ((err = request_irq(sp->irq, hs_interrupt, IRQF_DISABLED, MODNAME, sp)) < 0) - return err; - if (request_mem_region(sp->mem_base, sp->mem_length, MODNAME) == 0) { - sp->mem_base = 0; - return -ENOMEM; - } - - - /* According to section 3.2 of the PCMCIA standard, low-voltage - * capable cards must implement cold insertion, i.e. Vpp and - * Vcc set to 0 before card is inserted. - */ - /*hs_set_voltages(sp, 0, 0);*/ - - /* hi-Z the outputs to the card and set 16MB map mode */ - v = hs_in(sp, GCR); - v &= ~HD64465_PCCGCR_PCCT; /* memory-only card */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - v |= HD64465_PCCGCR_PDRV; /* enable outputs to card */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - v |= HD64465_PCCGCR_PMMOD; /* 16MB mapping mode */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - /* lowest 16MB of Common */ - v &= ~(HD64465_PCCGCR_PPA25|HD64465_PCCGCR_PPA24); - hs_out(sp, v, GCR); - - hs_reset_socket(sp, 1); - - printk(KERN_INFO "HD64465 PCMCIA bridge socket %d at 0x%08lx irq %d\n", - i, sp->mem_base, sp->irq); - - return 0; -} - -static void hs_exit_socket(hs_socket_t *sp) -{ - unsigned short cscier, gcr; - unsigned long flags; - - local_irq_save(flags); - - /* turn off interrupts in hardware */ - cscier = hs_in(sp, CSCIER); - cscier = (cscier & IER_MASK) | IER_OFF; - hs_out(sp, cscier, CSCIER); - - /* hi-Z the outputs to the card */ - gcr = hs_in(sp, GCR); - gcr &= HD64465_PCCGCR_PDRV; - hs_out(sp, gcr, GCR); - - /* power the card down */ - hs_set_voltages(sp, 0, 0); - - if (sp->mem_base != 0) - release_mem_region(sp->mem_base, sp->mem_length); - if (sp->irq != 0) { - free_irq(sp->irq, hs_interrupt); - hd64465_unregister_irq_demux(sp->irq); - } - - local_irq_restore(flags); -} - -static struct device_driver hd64465_driver = { - .name = "hd64465-pcmcia", - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, -}; - -static struct platform_device hd64465_device = { - .name = "hd64465-pcmcia", - .id = 0, -}; - -static int __init init_hs(void) -{ - int i; - unsigned short v; - -/* hd64465_io_debug = 1; */ - if (driver_register(&hd64465_driver)) - return -EINVAL; - - /* Wake both sockets out of STANDBY mode */ - /* TODO: wait 15ms */ - v = inw(HD64465_REG_SMSCR); - v &= ~(HD64465_SMSCR_PC0ST|HD64465_SMSCR_PC1ST); - outw(v, HD64465_REG_SMSCR); - - /* keep power controller out of shutdown mode */ - v = inb(HD64465_REG_PCC0SCR); - v |= HD64465_PCCSCR_SHDN; - outb(v, HD64465_REG_PCC0SCR); - - /* use serial (TPS2206) power controller */ - v = inb(HD64465_REG_PCC0CSCR); - v |= HD64465_PCCCSCR_PSWSEL; - outb(v, HD64465_REG_PCC0CSCR); - - /* - * Setup hs_sockets[] structures and request system resources. - * TODO: on memory allocation failure, power down the socket - * before quitting. - */ - for (i=0; i Date: Fri, 24 Oct 2008 04:31:58 +0000 Subject: powerpc/40x: Don't enable HCU4 board by default Fix the HCU4 Kconfig option to 'default n'. We don't want the board to always be enabled for other board defconfigs. Signed-off-by: Josh Boyer --- arch/powerpc/platforms/40x/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index 65730275e012..14e027f5be66 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -35,7 +35,7 @@ config EP405 config HCU4 bool "Hcu4" depends on 40x - default y + default n select 405GPR help This option enables support for the Nestal Maschinen HCU4 board. -- cgit v1.2.3 From 22e181ba7f09197dd6f35a48013cb86289644eb6 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 24 Oct 2008 01:05:56 +0200 Subject: powerpc: fix i2c on PPC linkstation / kurobox machines The i2c bus defn is broken on linkstation / kurobox machines since at least 2.6.27. Fix it. Also remove CONFIG_SERIAL_OF_PLATFORM, which, if enabled, breaks the serial console after the "console handover: boot [udbg0] -> real [ttyS1]" message. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Kumar Gala --- arch/powerpc/configs/linkstation_defconfig | 7 +++---- arch/powerpc/platforms/embedded6xx/linkstation.c | 14 ++++++++++++++ 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 6fc4c2127757..d0846ec238d0 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:05 2008 +# Linux kernel version: 2.6.27 +# Fri Oct 24 00:42:39 2008 # # CONFIG_PPC64 is not set @@ -934,7 +934,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -1211,7 +1211,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index eb5d74e26fe9..2ca7be65c2d2 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -54,6 +55,19 @@ static struct mtd_partition linkstation_physmap_partitions[] = { }, }; +static __initdata struct of_device_id of_bus_ids[] = { + { .type = "soc", }, + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(linkstation, declare_of_platform_devices); + static int __init linkstation_add_bridge(struct device_node *dev) { #ifdef CONFIG_PCI -- cgit v1.2.3 From 3420a982c74eddcf9d2a5d504dd2b272cceddae7 Mon Sep 17 00:00:00 2001 From: Rogério Brito Date: Mon, 13 Oct 2008 01:07:03 -0300 Subject: powerpc: compile kernel for linkstations optimized for size MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since Linkstations and Kuroboxes often have *very* little memory (as they are embedded systems), it is desirable to get their kernels compiled optimized for size. Signed-off-by: Rogério Brito Signed-off-by: Kumar Gala --- arch/powerpc/configs/linkstation_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index d0846ec238d0..8d869e952b44 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -90,7 +90,7 @@ CONFIG_NAMESPACES=y # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -- cgit v1.2.3 From 43271c4128071c39ac8f7bfda4780c28b6401545 Mon Sep 17 00:00:00 2001 From: Rogério Brito Date: Mon, 13 Oct 2008 01:51:17 -0300 Subject: powerpc: enable heap randomization for linkstations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current defconfig for Linkstation/Kuroboxes has the "Disable Heap Randomization" option enabled. Since some of these machines are facing the internet, it helps to have heap randomization enabled. This patch enables it. Signed-off-by: Rogério Brito Signed-off-by: Kumar Gala --- arch/powerpc/configs/linkstation_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 8d869e952b44..851b27e45cfc 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -101,7 +101,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y -- cgit v1.2.3 From edf1ae403896cb7750800508b14996ba6be39a53 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 29 Oct 2008 00:47:57 +0000 Subject: [CIFS] Reduce number of socket retries in large write path CIFS in some heavy stress conditions cifs could get EAGAIN repeatedly in smb_send2 which led to repeated retries and eventually failure of large writes which could lead to data corruption. There are three changes that were suggested by various network developers: 1) convert cifs from non-blocking to blocking tcp sendmsg (we left in the retry on failure) 2) change cifs to not set sendbuf and rcvbuf size for the socket (let tcp autotune the buffer sizes since that works much better in the TCP stack now) 3) if we have a partial frame sent in smb_send2, mark the tcp session as invalid (close the socket and reconnect) so we do not corrupt the remaining part of the SMB with the beginning of the next SMB. This does not appear to hurt performance measurably and has been run in various scenarios, but it definately removes a corruption that we were seeing in some high stress test cases. Acked-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/CHANGES | 6 +++++- fs/cifs/cifsglob.h | 2 ++ fs/cifs/cifsproto.h | 2 +- fs/cifs/connect.c | 50 +++++++++++++++++++++++++++++++++++++------------- fs/cifs/transport.c | 41 +++++++++++++++++++++++++++++++---------- 5 files changed, 76 insertions(+), 25 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 8f528ea24c48..8855331b2fba 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -4,7 +4,11 @@ Various fixes to make delete of open files behavior more predictable (when delete of an open file fails we mark the file as "delete-on-close" in a way that more servers accept, but only if we can first rename the file to a temporary name). Add experimental support for more safely -handling fcntl(F_SETLEASE). +handling fcntl(F_SETLEASE). Convert cifs to using blocking tcp +sends, and also let tcp autotune the socket send and receive buffers. +This reduces the number of EAGAIN errors returned by TCP/IP in +high stress workloads (and the number of retries on socket writes +when sending large SMBWriteX requests). Version 1.54 ------------ diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index c791e5b5a914..1cb1189f24e0 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -141,6 +141,8 @@ struct TCP_Server_Info { char versionMajor; char versionMinor; bool svlocal:1; /* local server or remote */ + bool noblocksnd; /* use blocking sendmsg */ + bool noautotune; /* do not autotune send buf sizes */ atomic_t socketUseCount; /* number of open cifs sessions on socket */ atomic_t inFlight; /* number of requests on the wire to server */ #ifdef CONFIG_CIFS_STATS2 diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 0cff7fe986e8..6f21ecb85ce5 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -36,7 +36,7 @@ extern void cifs_buf_release(void *); extern struct smb_hdr *cifs_small_buf_get(void); extern void cifs_small_buf_release(void *); extern int smb_send(struct socket *, struct smb_hdr *, - unsigned int /* length */ , struct sockaddr *); + unsigned int /* length */ , struct sockaddr *, bool); extern unsigned int _GetXid(void); extern void _FreeXid(unsigned int); #define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__func__, xid,current->fsuid)); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 71b7661e2260..e9f9248cb3fe 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -92,6 +92,8 @@ struct smb_vol { bool seal:1; /* request transport encryption on share */ bool nodfs:1; /* Do not request DFS, even if available */ bool local_lease:1; /* check leases only on local system, not remote */ + bool noblocksnd:1; + bool noautotune:1; unsigned int rsize; unsigned int wsize; unsigned int sockopt; @@ -102,9 +104,11 @@ struct smb_vol { static int ipv4_connect(struct sockaddr_in *psin_server, struct socket **csocket, char *netb_name, - char *server_netb_name); + char *server_netb_name, + bool noblocksnd, + bool nosndbuf); /* ipv6 never set sndbuf size */ static int ipv6_connect(struct sockaddr_in6 *psin_server, - struct socket **csocket); + struct socket **csocket, bool noblocksnd); /* @@ -191,12 +195,13 @@ cifs_reconnect(struct TCP_Server_Info *server) try_to_freeze(); if (server->protocolType == IPV6) { rc = ipv6_connect(&server->addr.sockAddr6, - &server->ssocket); + &server->ssocket, server->noautotune); } else { rc = ipv4_connect(&server->addr.sockAddr, &server->ssocket, server->workstation_RFC1001_name, - server->server_RFC1001_name); + server->server_RFC1001_name, + server->noblocksnd, server->noautotune); } if (rc) { cFYI(1, ("reconnect error %d", rc)); @@ -1192,6 +1197,10 @@ cifs_parse_mount_options(char *options, const char *devname, /* ignore */ } else if (strnicmp(data, "rw", 2) == 0) { vol->rw = true; + } else if (strnicmp(data, "noblocksend", 11) == 0) { + vol->noblocksnd = 1; + } else if (strnicmp(data, "noautotune", 10) == 0) { + vol->noautotune = 1; } else if ((strnicmp(data, "suid", 4) == 0) || (strnicmp(data, "nosuid", 6) == 0) || (strnicmp(data, "exec", 4) == 0) || @@ -1518,7 +1527,8 @@ static void rfc1002mangle(char *target, char *source, unsigned int length) static int ipv4_connect(struct sockaddr_in *psin_server, struct socket **csocket, - char *netbios_name, char *target_name) + char *netbios_name, char *target_name, + bool noblocksnd, bool noautotune) { int rc = 0; int connected = 0; @@ -1590,11 +1600,16 @@ ipv4_connect(struct sockaddr_in *psin_server, struct socket **csocket, (*csocket)->sk->sk_sndbuf, (*csocket)->sk->sk_rcvbuf, (*csocket)->sk->sk_rcvtimeo)); (*csocket)->sk->sk_rcvtimeo = 7 * HZ; + if (!noblocksnd) + (*csocket)->sk->sk_sndtimeo = 3 * HZ; + /* make the bufsizes depend on wsize/rsize and max requests */ - if ((*csocket)->sk->sk_sndbuf < (200 * 1024)) - (*csocket)->sk->sk_sndbuf = 200 * 1024; - if ((*csocket)->sk->sk_rcvbuf < (140 * 1024)) - (*csocket)->sk->sk_rcvbuf = 140 * 1024; + if (noautotune) { + if ((*csocket)->sk->sk_sndbuf < (200 * 1024)) + (*csocket)->sk->sk_sndbuf = 200 * 1024; + if ((*csocket)->sk->sk_rcvbuf < (140 * 1024)) + (*csocket)->sk->sk_rcvbuf = 140 * 1024; + } /* send RFC1001 sessinit */ if (psin_server->sin_port == htons(RFC1001_PORT)) { @@ -1631,7 +1646,7 @@ ipv4_connect(struct sockaddr_in *psin_server, struct socket **csocket, /* sizeof RFC1002_SESSION_REQUEST with no scope */ smb_buf->smb_buf_length = 0x81000044; rc = smb_send(*csocket, smb_buf, 0x44, - (struct sockaddr *)psin_server); + (struct sockaddr *)psin_server, noblocksnd); kfree(ses_init_buf); msleep(1); /* RFC1001 layer in at least one server requires very short break before negprot @@ -1651,7 +1666,8 @@ ipv4_connect(struct sockaddr_in *psin_server, struct socket **csocket, } static int -ipv6_connect(struct sockaddr_in6 *psin_server, struct socket **csocket) +ipv6_connect(struct sockaddr_in6 *psin_server, struct socket **csocket, + bool noblocksnd) { int rc = 0; int connected = 0; @@ -1720,6 +1736,9 @@ ipv6_connect(struct sockaddr_in6 *psin_server, struct socket **csocket) the default. sock_setsockopt not used because it expects user space buffer */ (*csocket)->sk->sk_rcvtimeo = 7 * HZ; + if (!noblocksnd) + (*csocket)->sk->sk_sndtimeo = 3 * HZ; + return rc; } @@ -1983,11 +2002,14 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ /* other OS never observed in Wild doing 139 with v6 */ - rc = ipv6_connect(&sin_server6, &csocket); + rc = ipv6_connect(&sin_server6, &csocket, + volume_info.noblocksnd); } else rc = ipv4_connect(&sin_server, &csocket, volume_info.source_rfc1001_name, - volume_info.target_rfc1001_name); + volume_info.target_rfc1001_name, + volume_info.noblocksnd, + volume_info.noautotune); if (rc < 0) { cERROR(1, ("Error connecting to IPv4 socket. " "Aborting operation")); @@ -2002,6 +2024,8 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, sock_release(csocket); goto out; } else { + srvTcp->noblocksnd = volume_info.noblocksnd; + srvTcp->noautotune = volume_info.noautotune; memcpy(&srvTcp->addr.sockAddr, &sin_server, sizeof(struct sockaddr_in)); atomic_set(&srvTcp->inFlight, 0); diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index bf0e6d8e382a..ba4d66644ebf 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -161,7 +161,7 @@ void DeleteTconOplockQEntries(struct cifsTconInfo *tcon) int smb_send(struct socket *ssocket, struct smb_hdr *smb_buffer, - unsigned int smb_buf_length, struct sockaddr *sin) + unsigned int smb_buf_length, struct sockaddr *sin, bool noblocksnd) { int rc = 0; int i = 0; @@ -178,7 +178,10 @@ smb_send(struct socket *ssocket, struct smb_hdr *smb_buffer, smb_msg.msg_namelen = sizeof(struct sockaddr); smb_msg.msg_control = NULL; smb_msg.msg_controllen = 0; - smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; /* BB add more flags?*/ + if (noblocksnd) + smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; + else + smb_msg.msg_flags = MSG_NOSIGNAL; /* smb header is converted in header_assemble. bcc and rest of SMB word area, and byte area if necessary, is converted to littleendian in @@ -229,8 +232,8 @@ smb_send(struct socket *ssocket, struct smb_hdr *smb_buffer, } static int -smb_send2(struct socket *ssocket, struct kvec *iov, int n_vec, - struct sockaddr *sin) +smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, + struct sockaddr *sin, bool noblocksnd) { int rc = 0; int i = 0; @@ -240,6 +243,7 @@ smb_send2(struct socket *ssocket, struct kvec *iov, int n_vec, unsigned int total_len; int first_vec = 0; unsigned int smb_buf_length = smb_buffer->smb_buf_length; + struct socket *ssocket = server->ssocket; if (ssocket == NULL) return -ENOTSOCK; /* BB eventually add reconnect code here */ @@ -248,7 +252,10 @@ smb_send2(struct socket *ssocket, struct kvec *iov, int n_vec, smb_msg.msg_namelen = sizeof(struct sockaddr); smb_msg.msg_control = NULL; smb_msg.msg_controllen = 0; - smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; /* BB add more flags?*/ + if (noblocksnd) + smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; + else + smb_msg.msg_flags = MSG_NOSIGNAL; /* smb header is converted in header_assemble. bcc and rest of SMB word area, and byte area if necessary, is converted to littleendian in @@ -312,6 +319,16 @@ smb_send2(struct socket *ssocket, struct kvec *iov, int n_vec, i = 0; /* in case we get ENOSPC on the next send */ } + if ((total_len > 0) && (total_len != smb_buf_length + 4)) { + cFYI(1, ("partial send (%d remaining), terminating session", + total_len)); + /* If we have only sent part of an SMB then the next SMB + could be taken as the remainder of this one. We need + to kill the socket so the server throws away the partial + SMB */ + server->tcpStatus = CifsNeedReconnect; + } + if (rc < 0) { cERROR(1, ("Error %d sending data on socket to server", rc)); } else @@ -518,8 +535,9 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&ses->server->inSend); #endif - rc = smb_send2(ses->server->ssocket, iov, n_vec, - (struct sockaddr *) &(ses->server->addr.sockAddr)); + rc = smb_send2(ses->server, iov, n_vec, + (struct sockaddr *) &(ses->server->addr.sockAddr), + ses->server->noblocksnd); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; @@ -711,7 +729,8 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses, atomic_inc(&ses->server->inSend); #endif rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr)); + (struct sockaddr *) &(ses->server->addr.sockAddr), + ses->server->noblocksnd); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; @@ -851,7 +870,8 @@ send_nt_cancel(struct cifsTconInfo *tcon, struct smb_hdr *in_buf, return rc; } rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr)); + (struct sockaddr *) &(ses->server->addr.sockAddr), + ses->server->noblocksnd); up(&ses->server->tcpSem); return rc; } @@ -941,7 +961,8 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon, atomic_inc(&ses->server->inSend); #endif rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr)); + (struct sockaddr *) &(ses->server->addr.sockAddr), + ses->server->noblocksnd); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; -- cgit v1.2.3 From 556dcee7b829e5c350c3ffdbdb87a8b15aa3c5d3 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 21 Oct 2008 17:45:58 +0200 Subject: [CRIS] Move header files from include to arch/cris/include. Change all users of header files to correct path. Remove some unneeded headers for arch-v32. Signed-off-by: Jesper Nilsson --- arch/cris/Makefile | 26 +- arch/cris/arch-v10/boot/.gitignore | 2 + arch/cris/arch-v10/boot/compressed/head.S | 2 +- arch/cris/arch-v10/boot/compressed/misc.c | 2 +- arch/cris/arch-v10/boot/rescue/head.S | 2 +- arch/cris/arch-v10/boot/rescue/kimagerescue.S | 2 +- arch/cris/arch-v10/boot/rescue/testrescue.S | 2 +- arch/cris/arch-v10/drivers/axisflashmap.c | 2 +- arch/cris/arch-v10/drivers/ds1302.c | 4 +- arch/cris/arch-v10/drivers/gpio.c | 4 +- arch/cris/arch-v10/drivers/i2c.c | 4 +- arch/cris/arch-v10/drivers/sync_serial.c | 4 +- arch/cris/arch-v10/kernel/crisksyms.c | 2 +- arch/cris/arch-v10/kernel/debugport.c | 2 +- arch/cris/arch-v10/kernel/dma.c | 2 +- arch/cris/arch-v10/kernel/entry.S | 2 +- arch/cris/arch-v10/kernel/fasttimer.c | 2 +- arch/cris/arch-v10/kernel/head.S | 2 +- arch/cris/arch-v10/kernel/io_interface_mux.c | 4 +- arch/cris/arch-v10/kernel/kgdb.c | 2 +- arch/cris/arch-v10/kernel/process.c | 2 +- arch/cris/arch-v10/kernel/time.c | 2 +- arch/cris/arch-v10/kernel/traps.c | 2 +- arch/cris/arch-v10/mm/fault.c | 2 +- arch/cris/arch-v10/mm/init.c | 2 +- arch/cris/arch-v10/mm/tlb.c | 2 +- arch/cris/arch-v32/boot/compressed/head.S | 4 +- arch/cris/arch-v32/drivers/mach-a3/gpio.c | 2 +- arch/cris/arch-v32/drivers/mach-a3/nandflash.c | 2 +- arch/cris/arch-v32/drivers/mach-fs/nandflash.c | 2 +- arch/cris/arch-v32/drivers/pci/bios.c | 2 +- arch/cris/arch-v32/kernel/cache.c | 4 +- arch/cris/arch-v32/kernel/crisksyms.c | 8 +- arch/cris/arch-v32/kernel/debugport.c | 2 +- arch/cris/arch-v32/kernel/entry.S | 4 +- arch/cris/arch-v32/kernel/head.S | 4 +- arch/cris/arch-v32/kernel/kgdb.c | 8 +- arch/cris/arch-v32/kernel/kgdb_asm.S | 2 +- arch/cris/arch-v32/kernel/pinmux.c | 8 +- arch/cris/arch-v32/kernel/ptrace.c | 2 +- arch/cris/arch-v32/kernel/signal.c | 4 +- arch/cris/arch-v32/lib/nand_init.S | 10 +- arch/cris/arch-v32/mach-a3/dma.c | 2 +- arch/cris/arch-v32/mach-a3/io.c | 2 +- arch/cris/arch-v32/mach-fs/cpufreq.c | 6 +- arch/cris/arch-v32/mach-fs/dma.c | 2 +- arch/cris/arch-v32/mach-fs/io.c | 4 +- arch/cris/arch-v32/mach-fs/vcs_hook.c | 4 +- arch/cris/arch-v32/mm/init.c | 4 +- arch/cris/arch-v32/mm/tlb.c | 4 +- arch/cris/include/arch-v10/arch/Kbuild | 4 + arch/cris/include/arch-v10/arch/atomic.h | 7 + arch/cris/include/arch-v10/arch/bitops.h | 73 + arch/cris/include/arch-v10/arch/bug.h | 66 + arch/cris/include/arch-v10/arch/byteorder.h | 26 + arch/cris/include/arch-v10/arch/cache.h | 8 + arch/cris/include/arch-v10/arch/checksum.h | 29 + arch/cris/include/arch-v10/arch/delay.h | 20 + arch/cris/include/arch-v10/arch/dma.h | 74 + arch/cris/include/arch-v10/arch/elf.h | 81 + arch/cris/include/arch-v10/arch/io.h | 199 + arch/cris/include/arch-v10/arch/io_interface_mux.h | 75 + arch/cris/include/arch-v10/arch/irq.h | 160 + arch/cris/include/arch-v10/arch/memmap.h | 22 + arch/cris/include/arch-v10/arch/mmu.h | 109 + arch/cris/include/arch-v10/arch/offset.h | 33 + arch/cris/include/arch-v10/arch/page.h | 30 + arch/cris/include/arch-v10/arch/pgtable.h | 17 + arch/cris/include/arch-v10/arch/processor.h | 70 + arch/cris/include/arch-v10/arch/ptrace.h | 119 + arch/cris/include/arch-v10/arch/sv_addr.agh | 7306 ++++++++++++++++++++ arch/cris/include/arch-v10/arch/sv_addr_ag.h | 139 + arch/cris/include/arch-v10/arch/svinto.h | 64 + arch/cris/include/arch-v10/arch/system.h | 63 + arch/cris/include/arch-v10/arch/thread_info.h | 12 + arch/cris/include/arch-v10/arch/timex.h | 30 + arch/cris/include/arch-v10/arch/tlb.h | 13 + arch/cris/include/arch-v10/arch/uaccess.h | 660 ++ arch/cris/include/arch-v10/arch/unistd.h | 148 + arch/cris/include/arch-v10/arch/user.h | 46 + arch/cris/include/arch-v32/arch/Kbuild | 2 + arch/cris/include/arch-v32/arch/atomic.h | 36 + arch/cris/include/arch-v32/arch/bitops.h | 64 + arch/cris/include/arch-v32/arch/bug.h | 33 + arch/cris/include/arch-v32/arch/byteorder.h | 20 + arch/cris/include/arch-v32/arch/cache.h | 19 + arch/cris/include/arch-v32/arch/checksum.h | 29 + arch/cris/include/arch-v32/arch/cryptocop.h | 272 + arch/cris/include/arch-v32/arch/delay.h | 28 + arch/cris/include/arch-v32/arch/dma.h | 79 + arch/cris/include/arch-v32/arch/elf.h | 73 + arch/cris/include/arch-v32/arch/hwregs/Makefile | 186 + .../arch-v32/arch/hwregs/asm/ata_defs_asm.h | 222 + .../arch-v32/arch/hwregs/asm/bif_core_defs_asm.h | 319 + .../arch-v32/arch/hwregs/asm/bif_dma_defs_asm.h | 495 ++ .../arch-v32/arch/hwregs/asm/bif_slave_defs_asm.h | 249 + .../arch-v32/arch/hwregs/asm/config_defs_asm.h | 131 + .../include/arch-v32/arch/hwregs/asm/cpu_vect.h | 41 + .../arch-v32/arch/hwregs/asm/cris_defs_asm.h | 114 + .../arch-v32/arch/hwregs/asm/cris_supp_reg.h | 10 + .../arch-v32/arch/hwregs/asm/dma_defs_asm.h | 368 + .../arch-v32/arch/hwregs/asm/eth_defs_asm.h | 498 ++ .../arch-v32/arch/hwregs/asm/gio_defs_asm.h | 276 + .../include/arch-v32/arch/hwregs/asm/intr_vect.h | 38 + .../arch-v32/arch/hwregs/asm/intr_vect_defs_asm.h | 355 + .../arch-v32/arch/hwregs/asm/irq_nmi_defs_asm.h | 69 + .../arch-v32/arch/hwregs/asm/marb_defs_asm.h | 579 ++ .../arch-v32/arch/hwregs/asm/mmu_defs_asm.h | 212 + .../arch-v32/arch/hwregs/asm/mmu_supp_reg.h | 7 + .../arch-v32/arch/hwregs/asm/rt_trace_defs_asm.h | 142 + .../arch-v32/arch/hwregs/asm/ser_defs_asm.h | 359 + .../arch-v32/arch/hwregs/asm/sser_defs_asm.h | 462 ++ .../arch-v32/arch/hwregs/asm/strcop_defs_asm.h | 84 + .../arch-v32/arch/hwregs/asm/strmux_defs_asm.h | 100 + .../arch-v32/arch/hwregs/asm/timer_defs_asm.h | 229 + arch/cris/include/arch-v32/arch/hwregs/ata_defs.h | 222 + .../include/arch-v32/arch/hwregs/bif_core_defs.h | 284 + .../include/arch-v32/arch/hwregs/bif_dma_defs.h | 473 ++ .../include/arch-v32/arch/hwregs/bif_slave_defs.h | 249 + .../include/arch-v32/arch/hwregs/config_defs.h | 142 + arch/cris/include/arch-v32/arch/hwregs/cpu_vect.h | 41 + arch/cris/include/arch-v32/arch/hwregs/dma.h | 127 + arch/cris/include/arch-v32/arch/hwregs/dma_defs.h | 436 ++ arch/cris/include/arch-v32/arch/hwregs/eth_defs.h | 378 + .../include/arch-v32/arch/hwregs/extmem_defs.h | 369 + .../cris/include/arch-v32/arch/hwregs/iop/Makefile | 146 + .../arch/hwregs/iop/asm/iop_crc_par_defs_asm.h | 171 + .../arch/hwregs/iop/asm/iop_dmc_in_defs_asm.h | 321 + .../arch/hwregs/iop/asm/iop_dmc_out_defs_asm.h | 349 + .../arch/hwregs/iop/asm/iop_fifo_in_defs_asm.h | 234 + .../hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h | 155 + .../arch/hwregs/iop/asm/iop_fifo_out_defs_asm.h | 254 + .../hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h | 158 + .../arch/hwregs/iop/asm/iop_mpu_defs_asm.h | 177 + .../arch/hwregs/iop/asm/iop_reg_space_asm.h | 44 + .../arch/hwregs/iop/asm/iop_sap_in_defs_asm.h | 182 + .../arch/hwregs/iop/asm/iop_sap_out_defs_asm.h | 346 + .../arch/hwregs/iop/asm/iop_scrc_in_defs_asm.h | 111 + .../arch/hwregs/iop/asm/iop_scrc_out_defs_asm.h | 105 + .../arch/hwregs/iop/asm/iop_spu_defs_asm.h | 573 ++ .../arch/hwregs/iop/asm/iop_sw_cfg_defs_asm.h | 1052 +++ .../arch/hwregs/iop/asm/iop_sw_cpu_defs_asm.h | 1758 +++++ .../arch/hwregs/iop/asm/iop_sw_mpu_defs_asm.h | 1776 +++++ .../arch/hwregs/iop/asm/iop_sw_spu_defs_asm.h | 691 ++ .../arch/hwregs/iop/asm/iop_timer_grp_defs_asm.h | 237 + .../arch/hwregs/iop/asm/iop_trigger_grp_defs_asm.h | 157 + .../arch/hwregs/iop/asm/iop_version_defs_asm.h | 64 + .../arch-v32/arch/hwregs/iop/iop_crc_par_defs.h | 232 + .../arch-v32/arch/hwregs/iop/iop_dmc_in_defs.h | 325 + .../arch-v32/arch/hwregs/iop/iop_dmc_out_defs.h | 326 + .../arch-v32/arch/hwregs/iop/iop_fifo_in_defs.h | 255 + .../arch/hwregs/iop/iop_fifo_in_extra_defs.h | 164 + .../arch-v32/arch/hwregs/iop/iop_fifo_out_defs.h | 278 + .../arch/hwregs/iop/iop_fifo_out_extra_defs.h | 164 + .../arch-v32/arch/hwregs/iop/iop_mpu_defs.h | 190 + .../arch-v32/arch/hwregs/iop/iop_mpu_macros.h | 764 ++ .../arch-v32/arch/hwregs/iop/iop_reg_space.h | 44 + .../arch-v32/arch/hwregs/iop/iop_sap_in_defs.h | 179 + .../arch-v32/arch/hwregs/iop/iop_sap_out_defs.h | 306 + .../arch-v32/arch/hwregs/iop/iop_scrc_in_defs.h | 160 + .../arch-v32/arch/hwregs/iop/iop_scrc_out_defs.h | 146 + .../arch-v32/arch/hwregs/iop/iop_spu_defs.h | 453 ++ .../arch-v32/arch/hwregs/iop/iop_sw_cfg_defs.h | 1042 +++ .../arch-v32/arch/hwregs/iop/iop_sw_cpu_defs.h | 853 +++ .../arch-v32/arch/hwregs/iop/iop_sw_mpu_defs.h | 893 +++ .../arch-v32/arch/hwregs/iop/iop_sw_spu_defs.h | 552 ++ .../arch-v32/arch/hwregs/iop/iop_timer_grp_defs.h | 249 + .../arch/hwregs/iop/iop_trigger_grp_defs.h | 170 + .../arch-v32/arch/hwregs/iop/iop_version_defs.h | 99 + .../include/arch-v32/arch/hwregs/irq_nmi_defs.h | 104 + .../include/arch-v32/arch/hwregs/marb_bp_defs.h | 205 + arch/cris/include/arch-v32/arch/hwregs/marb_defs.h | 475 ++ arch/cris/include/arch-v32/arch/hwregs/reg_rdwr.h | 17 + .../include/arch-v32/arch/hwregs/rt_trace_defs.h | 173 + arch/cris/include/arch-v32/arch/hwregs/ser_defs.h | 308 + arch/cris/include/arch-v32/arch/hwregs/sser_defs.h | 331 + arch/cris/include/arch-v32/arch/hwregs/strcop.h | 57 + .../include/arch-v32/arch/hwregs/strcop_defs.h | 109 + arch/cris/include/arch-v32/arch/hwregs/supp_reg.h | 78 + arch/cris/include/arch-v32/arch/intmem.h | 9 + arch/cris/include/arch-v32/arch/io.h | 136 + arch/cris/include/arch-v32/arch/irq.h | 124 + arch/cris/include/arch-v32/arch/memmap.h | 24 + arch/cris/include/arch-v32/arch/mmu.h | 111 + arch/cris/include/arch-v32/arch/offset.h | 35 + arch/cris/include/arch-v32/arch/page.h | 27 + arch/cris/include/arch-v32/arch/pgtable.h | 9 + arch/cris/include/arch-v32/arch/processor.h | 59 + arch/cris/include/arch-v32/arch/ptrace.h | 118 + arch/cris/include/arch-v32/arch/spinlock.h | 129 + arch/cris/include/arch-v32/arch/system.h | 69 + arch/cris/include/arch-v32/arch/thread_info.h | 13 + arch/cris/include/arch-v32/arch/timex.h | 31 + arch/cris/include/arch-v32/arch/tlb.h | 14 + arch/cris/include/arch-v32/arch/uaccess.h | 748 ++ arch/cris/include/arch-v32/arch/unistd.h | 155 + arch/cris/include/arch-v32/arch/user.h | 41 + arch/cris/include/arch-v32/mach-a3/mach/arbiter.h | 34 + arch/cris/include/arch-v32/mach-a3/mach/dma.h | 31 + .../mach-a3/mach/hwregs/asm/clkgen_defs_asm.h | 164 + .../mach-a3/mach/hwregs/asm/ddr2_defs_asm.h | 266 + .../mach-a3/mach/hwregs/asm/gio_defs_asm.h | 849 +++ .../mach-a3/mach/hwregs/asm/pinmux_defs_asm.h | 572 ++ .../mach-a3/mach/hwregs/asm/pio_defs_asm.h | 337 + .../arch-v32/mach-a3/mach/hwregs/asm/reg_map_asm.h | 99 + .../mach-a3/mach/hwregs/asm/timer_defs_asm.h | 228 + .../arch-v32/mach-a3/mach/hwregs/clkgen_defs.h | 159 + .../arch-v32/mach-a3/mach/hwregs/ddr2_defs.h | 281 + .../arch-v32/mach-a3/mach/hwregs/gio_defs.h | 837 +++ .../arch-v32/mach-a3/mach/hwregs/intr_vect.h | 46 + .../arch-v32/mach-a3/mach/hwregs/intr_vect_defs.h | 341 + .../mach/hwregs/iop/asm/iop_reg_space_asm.h | 31 + .../mach/hwregs/iop/asm/iop_sap_in_defs_asm.h | 109 + .../mach/hwregs/iop/asm/iop_sap_out_defs_asm.h | 276 + .../mach/hwregs/iop/asm/iop_sw_cfg_defs_asm.h | 739 ++ .../mach/hwregs/iop/asm/iop_sw_cpu_defs_asm.h | 950 +++ .../mach/hwregs/iop/asm/iop_sw_mpu_defs_asm.h | 1086 +++ .../mach/hwregs/iop/asm/iop_sw_spu_defs_asm.h | 523 ++ .../mach/hwregs/iop/asm/iop_version_defs_asm.h | 61 + .../mach-a3/mach/hwregs/iop/iop_reg_space.h | 31 + .../mach-a3/mach/hwregs/iop/iop_sap_in_defs.h | 141 + .../mach-a3/mach/hwregs/iop/iop_sap_out_defs.h | 231 + .../mach-a3/mach/hwregs/iop/iop_sw_cfg_defs.h | 725 ++ .../mach-a3/mach/hwregs/iop/iop_sw_cpu_defs.h | 522 ++ .../mach-a3/mach/hwregs/iop/iop_sw_mpu_defs.h | 648 ++ .../mach-a3/mach/hwregs/iop/iop_sw_spu_defs.h | 441 ++ .../mach-a3/mach/hwregs/iop/iop_version_defs.h | 96 + .../arch-v32/mach-a3/mach/hwregs/l2cache_defs.h | 142 + .../arch-v32/mach-a3/mach/hwregs/marb_bar_defs.h | 482 ++ .../arch-v32/mach-a3/mach/hwregs/marb_foo_defs.h | 626 ++ .../arch-v32/mach-a3/mach/hwregs/pinmux_defs.h | 312 + .../arch-v32/mach-a3/mach/hwregs/pio_defs.h | 371 + .../include/arch-v32/mach-a3/mach/hwregs/reg_map.h | 103 + .../arch-v32/mach-a3/mach/hwregs/strmux_defs.h | 120 + .../arch-v32/mach-a3/mach/hwregs/timer_defs.h | 265 + arch/cris/include/arch-v32/mach-a3/mach/memmap.h | 10 + arch/cris/include/arch-v32/mach-a3/mach/pinmux.h | 45 + .../cris/include/arch-v32/mach-a3/mach/startup.inc | 60 + arch/cris/include/arch-v32/mach-fs/mach/arbiter.h | 28 + .../mach-fs/mach/hwregs/asm/bif_core_defs_asm.h | 319 + .../mach-fs/mach/hwregs/asm/config_defs_asm.h | 131 + .../mach-fs/mach/hwregs/asm/gio_defs_asm.h | 276 + .../mach-fs/mach/hwregs/asm/pinmux_defs_asm.h | 632 ++ .../arch-v32/mach-fs/mach/hwregs/asm/reg_map_asm.h | 96 + .../mach-fs/mach/hwregs/asm/timer_defs_asm.h | 229 + .../arch-v32/mach-fs/mach/hwregs/bif_core_defs.h | 284 + .../arch-v32/mach-fs/mach/hwregs/bif_dma_defs.h | 473 ++ .../arch-v32/mach-fs/mach/hwregs/bif_slave_defs.h | 249 + .../arch-v32/mach-fs/mach/hwregs/config_defs.h | 142 + .../arch-v32/mach-fs/mach/hwregs/gio_defs.h | 295 + .../arch-v32/mach-fs/mach/hwregs/intr_vect.h | 41 + .../arch-v32/mach-fs/mach/hwregs/intr_vect_defs.h | 228 + .../arch-v32/mach-fs/mach/hwregs/marb_bp_defs.h | 205 + .../arch-v32/mach-fs/mach/hwregs/marb_defs.h | 475 ++ .../arch-v32/mach-fs/mach/hwregs/pinmux_defs.h | 357 + .../include/arch-v32/mach-fs/mach/hwregs/reg_map.h | 104 + .../arch-v32/mach-fs/mach/hwregs/strmux_defs.h | 127 + .../arch-v32/mach-fs/mach/hwregs/timer_defs.h | 266 + arch/cris/include/arch-v32/mach-fs/mach/pinmux.h | 38 + .../cris/include/arch-v32/mach-fs/mach/startup.inc | 77 + arch/cris/include/asm/Kbuild | 11 + arch/cris/include/asm/atomic.h | 164 + arch/cris/include/asm/auxvec.h | 4 + arch/cris/include/asm/axisflashmap.h | 61 + arch/cris/include/asm/bitops.h | 166 + arch/cris/include/asm/bug.h | 4 + arch/cris/include/asm/bugs.h | 21 + arch/cris/include/asm/byteorder.h | 27 + arch/cris/include/asm/cache.h | 6 + arch/cris/include/asm/cacheflush.h | 31 + arch/cris/include/asm/checksum.h | 83 + arch/cris/include/asm/cputime.h | 6 + arch/cris/include/asm/current.h | 15 + arch/cris/include/asm/delay.h | 27 + arch/cris/include/asm/device.h | 7 + arch/cris/include/asm/div64.h | 1 + arch/cris/include/asm/dma-mapping.h | 170 + arch/cris/include/asm/dma.h | 21 + arch/cris/include/asm/elf.h | 93 + arch/cris/include/asm/emergency-restart.h | 6 + arch/cris/include/asm/errno.h | 6 + arch/cris/include/asm/eshlibld.h | 113 + arch/cris/include/asm/ethernet.h | 21 + arch/cris/include/asm/etraxgpio.h | 179 + arch/cris/include/asm/etraxi2c.h | 36 + arch/cris/include/asm/fasttimer.h | 47 + arch/cris/include/asm/fb.h | 12 + arch/cris/include/asm/fcntl.h | 1 + arch/cris/include/asm/futex.h | 6 + arch/cris/include/asm/hardirq.h | 27 + arch/cris/include/asm/hw_irq.h | 5 + arch/cris/include/asm/io.h | 154 + arch/cris/include/asm/ioctl.h | 1 + arch/cris/include/asm/ioctls.h | 91 + arch/cris/include/asm/ipcbuf.h | 29 + arch/cris/include/asm/irq.h | 13 + arch/cris/include/asm/irq_regs.h | 1 + arch/cris/include/asm/kdebug.h | 1 + arch/cris/include/asm/kmap_types.h | 25 + arch/cris/include/asm/linkage.h | 6 + arch/cris/include/asm/local.h | 1 + arch/cris/include/asm/mman.h | 19 + arch/cris/include/asm/mmu.h | 10 + arch/cris/include/asm/mmu_context.h | 26 + arch/cris/include/asm/module.h | 9 + arch/cris/include/asm/msgbuf.h | 33 + arch/cris/include/asm/mutex.h | 9 + arch/cris/include/asm/page.h | 74 + arch/cris/include/asm/param.h | 23 + arch/cris/include/asm/pci.h | 68 + arch/cris/include/asm/percpu.h | 6 + arch/cris/include/asm/pgalloc.h | 58 + arch/cris/include/asm/pgtable.h | 299 + arch/cris/include/asm/poll.h | 1 + arch/cris/include/asm/posix_types.h | 66 + arch/cris/include/asm/processor.h | 75 + arch/cris/include/asm/ptrace.h | 16 + arch/cris/include/asm/resource.h | 6 + arch/cris/include/asm/rs485.h | 20 + arch/cris/include/asm/rtc.h | 107 + arch/cris/include/asm/scatterlist.h | 23 + arch/cris/include/asm/sections.h | 7 + arch/cris/include/asm/segment.h | 8 + arch/cris/include/asm/sembuf.h | 25 + arch/cris/include/asm/setup.h | 6 + arch/cris/include/asm/shmbuf.h | 42 + arch/cris/include/asm/shmparam.h | 8 + arch/cris/include/asm/sigcontext.h | 24 + arch/cris/include/asm/siginfo.h | 6 + arch/cris/include/asm/signal.h | 163 + arch/cris/include/asm/smp.h | 11 + arch/cris/include/asm/socket.h | 61 + arch/cris/include/asm/sockios.h | 13 + arch/cris/include/asm/spinlock.h | 1 + arch/cris/include/asm/stat.h | 81 + arch/cris/include/asm/statfs.h | 6 + arch/cris/include/asm/string.h | 14 + arch/cris/include/asm/sync_serial.h | 107 + arch/cris/include/asm/system.h | 88 + arch/cris/include/asm/termbits.h | 234 + arch/cris/include/asm/termios.h | 91 + arch/cris/include/asm/thread_info.h | 106 + arch/cris/include/asm/timex.h | 24 + arch/cris/include/asm/tlb.h | 19 + arch/cris/include/asm/tlbflush.h | 48 + arch/cris/include/asm/topology.h | 6 + arch/cris/include/asm/types.h | 30 + arch/cris/include/asm/uaccess.h | 404 ++ arch/cris/include/asm/ucontext.h | 12 + arch/cris/include/asm/unaligned.h | 13 + arch/cris/include/asm/unistd.h | 374 + arch/cris/include/asm/user.h | 52 + arch/cris/mm/ioremap.c | 2 +- drivers/net/cris/eth_v10.c | 4 +- drivers/serial/crisv10.c | 4 +- drivers/serial/crisv10.h | 2 +- include/asm-cris/Kbuild | 11 - include/asm-cris/arch-v10/Kbuild | 4 - include/asm-cris/arch-v10/atomic.h | 7 - include/asm-cris/arch-v10/bitops.h | 73 - include/asm-cris/arch-v10/bug.h | 66 - include/asm-cris/arch-v10/byteorder.h | 26 - include/asm-cris/arch-v10/cache.h | 8 - include/asm-cris/arch-v10/checksum.h | 29 - include/asm-cris/arch-v10/delay.h | 20 - include/asm-cris/arch-v10/dma.h | 74 - include/asm-cris/arch-v10/elf.h | 81 - include/asm-cris/arch-v10/io.h | 199 - include/asm-cris/arch-v10/io_interface_mux.h | 75 - include/asm-cris/arch-v10/irq.h | 160 - include/asm-cris/arch-v10/memmap.h | 22 - include/asm-cris/arch-v10/mmu.h | 109 - include/asm-cris/arch-v10/offset.h | 33 - include/asm-cris/arch-v10/page.h | 30 - include/asm-cris/arch-v10/pgtable.h | 17 - include/asm-cris/arch-v10/processor.h | 70 - include/asm-cris/arch-v10/ptrace.h | 119 - include/asm-cris/arch-v10/sv_addr.agh | 7306 -------------------- include/asm-cris/arch-v10/sv_addr_ag.h | 139 - include/asm-cris/arch-v10/svinto.h | 64 - include/asm-cris/arch-v10/system.h | 63 - include/asm-cris/arch-v10/thread_info.h | 12 - include/asm-cris/arch-v10/timex.h | 30 - include/asm-cris/arch-v10/tlb.h | 13 - include/asm-cris/arch-v10/uaccess.h | 660 -- include/asm-cris/arch-v10/unistd.h | 148 - include/asm-cris/arch-v10/user.h | 46 - include/asm-cris/arch-v32/Kbuild | 2 - include/asm-cris/arch-v32/arbiter.h | 30 - include/asm-cris/arch-v32/atomic.h | 36 - include/asm-cris/arch-v32/bitops.h | 64 - include/asm-cris/arch-v32/bug.h | 33 - include/asm-cris/arch-v32/byteorder.h | 20 - include/asm-cris/arch-v32/cache.h | 19 - include/asm-cris/arch-v32/checksum.h | 29 - include/asm-cris/arch-v32/cryptocop.h | 272 - include/asm-cris/arch-v32/delay.h | 28 - include/asm-cris/arch-v32/dma.h | 79 - include/asm-cris/arch-v32/elf.h | 73 - include/asm-cris/arch-v32/hwregs/Makefile | 186 - .../asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h | 222 - .../arch-v32/hwregs/asm/bif_core_defs_asm.h | 319 - .../arch-v32/hwregs/asm/bif_dma_defs_asm.h | 495 -- .../arch-v32/hwregs/asm/bif_slave_defs_asm.h | 249 - .../asm-cris/arch-v32/hwregs/asm/config_defs_asm.h | 131 - include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h | 41 - .../asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h | 114 - .../asm-cris/arch-v32/hwregs/asm/cris_supp_reg.h | 10 - .../asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h | 368 - .../asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h | 498 -- .../asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h | 276 - include/asm-cris/arch-v32/hwregs/asm/intr_vect.h | 38 - .../arch-v32/hwregs/asm/intr_vect_defs_asm.h | 355 - .../arch-v32/hwregs/asm/irq_nmi_defs_asm.h | 69 - .../asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h | 579 -- .../asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h | 212 - .../asm-cris/arch-v32/hwregs/asm/mmu_supp_reg.h | 7 - .../asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h | 632 -- include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h | 96 - .../arch-v32/hwregs/asm/rt_trace_defs_asm.h | 142 - .../asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h | 359 - .../asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h | 462 -- .../asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h | 84 - .../asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h | 100 - .../asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h | 229 - include/asm-cris/arch-v32/hwregs/ata_defs.h | 222 - include/asm-cris/arch-v32/hwregs/bif_core_defs.h | 284 - include/asm-cris/arch-v32/hwregs/bif_dma_defs.h | 473 -- include/asm-cris/arch-v32/hwregs/bif_slave_defs.h | 249 - include/asm-cris/arch-v32/hwregs/config_defs.h | 142 - include/asm-cris/arch-v32/hwregs/cpu_vect.h | 41 - include/asm-cris/arch-v32/hwregs/dma.h | 127 - include/asm-cris/arch-v32/hwregs/dma_defs.h | 436 -- include/asm-cris/arch-v32/hwregs/eth_defs.h | 378 - include/asm-cris/arch-v32/hwregs/extmem_defs.h | 369 - include/asm-cris/arch-v32/hwregs/gio_defs.h | 295 - include/asm-cris/arch-v32/hwregs/intr_vect.h | 39 - include/asm-cris/arch-v32/hwregs/iop/Makefile | 146 - .../arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h | 171 - .../arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h | 321 - .../arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h | 349 - .../arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h | 234 - .../hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h | 155 - .../hwregs/iop/asm/iop_fifo_out_defs_asm.h | 254 - .../hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h | 158 - .../arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h | 177 - .../arch-v32/hwregs/iop/asm/iop_reg_space_asm.h | 44 - .../arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h | 182 - .../arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h | 346 - .../arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h | 111 - .../hwregs/iop/asm/iop_scrc_out_defs_asm.h | 105 - .../arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h | 573 -- .../arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h | 1052 --- .../arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h | 1758 ----- .../arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h | 1776 ----- .../arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h | 691 -- .../hwregs/iop/asm/iop_timer_grp_defs_asm.h | 237 - .../hwregs/iop/asm/iop_trigger_grp_defs_asm.h | 157 - .../arch-v32/hwregs/iop/asm/iop_version_defs_asm.h | 64 - .../arch-v32/hwregs/iop/iop_crc_par_defs.h | 232 - .../asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h | 325 - .../arch-v32/hwregs/iop/iop_dmc_out_defs.h | 326 - .../arch-v32/hwregs/iop/iop_fifo_in_defs.h | 255 - .../arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h | 164 - .../arch-v32/hwregs/iop/iop_fifo_out_defs.h | 278 - .../arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h | 164 - .../asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h | 190 - .../asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h | 764 -- .../asm-cris/arch-v32/hwregs/iop/iop_reg_space.h | 44 - .../asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h | 179 - .../arch-v32/hwregs/iop/iop_sap_out_defs.h | 306 - .../arch-v32/hwregs/iop/iop_scrc_in_defs.h | 160 - .../arch-v32/hwregs/iop/iop_scrc_out_defs.h | 146 - .../asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h | 453 -- .../asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h | 1042 --- .../asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h | 853 --- .../asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h | 893 --- .../asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h | 552 -- .../arch-v32/hwregs/iop/iop_timer_grp_defs.h | 249 - .../arch-v32/hwregs/iop/iop_trigger_grp_defs.h | 170 - .../arch-v32/hwregs/iop/iop_version_defs.h | 99 - include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h | 104 - include/asm-cris/arch-v32/hwregs/marb_bp_defs.h | 205 - include/asm-cris/arch-v32/hwregs/marb_defs.h | 475 -- include/asm-cris/arch-v32/hwregs/pinmux_defs.h | 357 - include/asm-cris/arch-v32/hwregs/reg_rdwr.h | 17 - include/asm-cris/arch-v32/hwregs/rt_trace_defs.h | 173 - include/asm-cris/arch-v32/hwregs/ser_defs.h | 308 - include/asm-cris/arch-v32/hwregs/sser_defs.h | 331 - include/asm-cris/arch-v32/hwregs/strcop.h | 57 - include/asm-cris/arch-v32/hwregs/strcop_defs.h | 109 - include/asm-cris/arch-v32/hwregs/strmux_defs.h | 127 - include/asm-cris/arch-v32/hwregs/supp_reg.h | 78 - include/asm-cris/arch-v32/intmem.h | 9 - include/asm-cris/arch-v32/io.h | 136 - include/asm-cris/arch-v32/irq.h | 124 - include/asm-cris/arch-v32/mach-a3/arbiter.h | 34 - include/asm-cris/arch-v32/mach-a3/dma.h | 31 - .../arch-v32/mach-a3/hwregs/asm/clkgen_defs_asm.h | 164 - .../arch-v32/mach-a3/hwregs/asm/ddr2_defs_asm.h | 266 - .../arch-v32/mach-a3/hwregs/asm/gio_defs_asm.h | 849 --- .../arch-v32/mach-a3/hwregs/asm/pinmux_defs_asm.h | 572 -- .../arch-v32/mach-a3/hwregs/asm/pio_defs_asm.h | 337 - .../arch-v32/mach-a3/hwregs/asm/reg_map_asm.h | 99 - .../arch-v32/mach-a3/hwregs/asm/timer_defs_asm.h | 228 - .../asm-cris/arch-v32/mach-a3/hwregs/clkgen_defs.h | 159 - .../asm-cris/arch-v32/mach-a3/hwregs/ddr2_defs.h | 281 - .../asm-cris/arch-v32/mach-a3/hwregs/gio_defs.h | 837 --- .../asm-cris/arch-v32/mach-a3/hwregs/intr_vect.h | 46 - .../arch-v32/mach-a3/hwregs/intr_vect_defs.h | 341 - .../mach-a3/hwregs/iop/asm/iop_reg_space_asm.h | 31 - .../mach-a3/hwregs/iop/asm/iop_sap_in_defs_asm.h | 109 - .../mach-a3/hwregs/iop/asm/iop_sap_out_defs_asm.h | 276 - .../mach-a3/hwregs/iop/asm/iop_sw_cfg_defs_asm.h | 739 -- .../mach-a3/hwregs/iop/asm/iop_sw_cpu_defs_asm.h | 950 --- .../mach-a3/hwregs/iop/asm/iop_sw_mpu_defs_asm.h | 1086 --- .../mach-a3/hwregs/iop/asm/iop_sw_spu_defs_asm.h | 523 -- .../mach-a3/hwregs/iop/asm/iop_version_defs_asm.h | 61 - .../arch-v32/mach-a3/hwregs/iop/iop_reg_space.h | 31 - .../arch-v32/mach-a3/hwregs/iop/iop_sap_in_defs.h | 141 - .../arch-v32/mach-a3/hwregs/iop/iop_sap_out_defs.h | 231 - .../arch-v32/mach-a3/hwregs/iop/iop_sw_cfg_defs.h | 725 -- .../arch-v32/mach-a3/hwregs/iop/iop_sw_cpu_defs.h | 522 -- .../arch-v32/mach-a3/hwregs/iop/iop_sw_mpu_defs.h | 648 -- .../arch-v32/mach-a3/hwregs/iop/iop_sw_spu_defs.h | 441 -- .../arch-v32/mach-a3/hwregs/iop/iop_version_defs.h | 96 - .../arch-v32/mach-a3/hwregs/l2cache_defs.h | 142 - .../arch-v32/mach-a3/hwregs/marb_bar_defs.h | 482 -- .../arch-v32/mach-a3/hwregs/marb_foo_defs.h | 626 -- .../asm-cris/arch-v32/mach-a3/hwregs/pinmux_defs.h | 312 - .../asm-cris/arch-v32/mach-a3/hwregs/pio_defs.h | 371 - include/asm-cris/arch-v32/mach-a3/hwregs/reg_map.h | 103 - .../asm-cris/arch-v32/mach-a3/hwregs/strmux_defs.h | 120 - .../asm-cris/arch-v32/mach-a3/hwregs/timer_defs.h | 265 - include/asm-cris/arch-v32/mach-a3/memmap.h | 10 - include/asm-cris/arch-v32/mach-a3/pinmux.h | 45 - include/asm-cris/arch-v32/mach-a3/startup.inc | 60 - include/asm-cris/arch-v32/mach-fs/arbiter.h | 28 - .../mach-fs/hwregs/asm/bif_core_defs_asm.h | 319 - .../arch-v32/mach-fs/hwregs/asm/config_defs_asm.h | 131 - .../arch-v32/mach-fs/hwregs/asm/gio_defs_asm.h | 276 - .../arch-v32/mach-fs/hwregs/asm/pinmux_defs_asm.h | 632 -- .../arch-v32/mach-fs/hwregs/asm/reg_map_asm.h | 96 - .../arch-v32/mach-fs/hwregs/asm/timer_defs_asm.h | 229 - .../arch-v32/mach-fs/hwregs/bif_core_defs.h | 284 - .../arch-v32/mach-fs/hwregs/bif_dma_defs.h | 473 -- .../arch-v32/mach-fs/hwregs/bif_slave_defs.h | 249 - .../asm-cris/arch-v32/mach-fs/hwregs/config_defs.h | 142 - .../asm-cris/arch-v32/mach-fs/hwregs/gio_defs.h | 295 - .../asm-cris/arch-v32/mach-fs/hwregs/intr_vect.h | 41 - .../arch-v32/mach-fs/hwregs/intr_vect_defs.h | 228 - .../arch-v32/mach-fs/hwregs/marb_bp_defs.h | 205 - .../asm-cris/arch-v32/mach-fs/hwregs/marb_defs.h | 475 -- .../asm-cris/arch-v32/mach-fs/hwregs/pinmux_defs.h | 357 - include/asm-cris/arch-v32/mach-fs/hwregs/reg_map.h | 104 - .../asm-cris/arch-v32/mach-fs/hwregs/strmux_defs.h | 127 - .../asm-cris/arch-v32/mach-fs/hwregs/timer_defs.h | 266 - include/asm-cris/arch-v32/mach-fs/pinmux.h | 38 - include/asm-cris/arch-v32/mach-fs/startup.inc | 77 - include/asm-cris/arch-v32/memmap.h | 24 - include/asm-cris/arch-v32/mmu.h | 111 - include/asm-cris/arch-v32/offset.h | 35 - include/asm-cris/arch-v32/page.h | 27 - include/asm-cris/arch-v32/pgtable.h | 9 - include/asm-cris/arch-v32/pinmux.h | 40 - include/asm-cris/arch-v32/processor.h | 59 - include/asm-cris/arch-v32/ptrace.h | 118 - include/asm-cris/arch-v32/spinlock.h | 129 - include/asm-cris/arch-v32/system.h | 69 - include/asm-cris/arch-v32/thread_info.h | 13 - include/asm-cris/arch-v32/timex.h | 31 - include/asm-cris/arch-v32/tlb.h | 14 - include/asm-cris/arch-v32/uaccess.h | 748 -- include/asm-cris/arch-v32/unistd.h | 155 - include/asm-cris/arch-v32/user.h | 41 - include/asm-cris/atomic.h | 164 - include/asm-cris/auxvec.h | 4 - include/asm-cris/axisflashmap.h | 61 - include/asm-cris/bitops.h | 166 - include/asm-cris/bug.h | 4 - include/asm-cris/bugs.h | 21 - include/asm-cris/byteorder.h | 27 - include/asm-cris/cache.h | 6 - include/asm-cris/cacheflush.h | 31 - include/asm-cris/checksum.h | 83 - include/asm-cris/cputime.h | 6 - include/asm-cris/current.h | 15 - include/asm-cris/delay.h | 27 - include/asm-cris/device.h | 7 - include/asm-cris/div64.h | 1 - include/asm-cris/dma-mapping.h | 170 - include/asm-cris/dma.h | 21 - include/asm-cris/elf.h | 93 - include/asm-cris/emergency-restart.h | 6 - include/asm-cris/errno.h | 6 - include/asm-cris/eshlibld.h | 113 - include/asm-cris/ethernet.h | 21 - include/asm-cris/etraxgpio.h | 179 - include/asm-cris/etraxi2c.h | 36 - include/asm-cris/fasttimer.h | 47 - include/asm-cris/fb.h | 12 - include/asm-cris/fcntl.h | 1 - include/asm-cris/futex.h | 6 - include/asm-cris/hardirq.h | 27 - include/asm-cris/hw_irq.h | 5 - include/asm-cris/io.h | 154 - include/asm-cris/ioctl.h | 1 - include/asm-cris/ioctls.h | 91 - include/asm-cris/ipcbuf.h | 29 - include/asm-cris/irq.h | 13 - include/asm-cris/irq_regs.h | 1 - include/asm-cris/kdebug.h | 1 - include/asm-cris/kmap_types.h | 25 - include/asm-cris/linkage.h | 6 - include/asm-cris/local.h | 1 - include/asm-cris/mman.h | 19 - include/asm-cris/mmu.h | 10 - include/asm-cris/mmu_context.h | 26 - include/asm-cris/module.h | 9 - include/asm-cris/msgbuf.h | 33 - include/asm-cris/mutex.h | 9 - include/asm-cris/page.h | 74 - include/asm-cris/param.h | 23 - include/asm-cris/pci.h | 68 - include/asm-cris/percpu.h | 6 - include/asm-cris/pgalloc.h | 58 - include/asm-cris/pgtable.h | 299 - include/asm-cris/poll.h | 1 - include/asm-cris/posix_types.h | 66 - include/asm-cris/processor.h | 75 - include/asm-cris/ptrace.h | 16 - include/asm-cris/resource.h | 6 - include/asm-cris/rs485.h | 20 - include/asm-cris/rtc.h | 107 - include/asm-cris/scatterlist.h | 23 - include/asm-cris/sections.h | 7 - include/asm-cris/segment.h | 8 - include/asm-cris/sembuf.h | 25 - include/asm-cris/setup.h | 6 - include/asm-cris/shmbuf.h | 42 - include/asm-cris/shmparam.h | 8 - include/asm-cris/sigcontext.h | 24 - include/asm-cris/siginfo.h | 6 - include/asm-cris/signal.h | 163 - include/asm-cris/smp.h | 11 - include/asm-cris/socket.h | 61 - include/asm-cris/sockios.h | 13 - include/asm-cris/spinlock.h | 1 - include/asm-cris/stat.h | 81 - include/asm-cris/statfs.h | 6 - include/asm-cris/string.h | 14 - include/asm-cris/sync_serial.h | 107 - include/asm-cris/system.h | 88 - include/asm-cris/termbits.h | 234 - include/asm-cris/termios.h | 91 - include/asm-cris/thread_info.h | 106 - include/asm-cris/timex.h | 24 - include/asm-cris/tlb.h | 19 - include/asm-cris/tlbflush.h | 48 - include/asm-cris/topology.h | 6 - include/asm-cris/types.h | 30 - include/asm-cris/uaccess.h | 404 -- include/asm-cris/ucontext.h | 12 - include/asm-cris/unaligned.h | 13 - include/asm-cris/unistd.h | 374 - include/asm-cris/user.h | 52 - 666 files changed, 62525 insertions(+), 64147 deletions(-) create mode 100644 arch/cris/arch-v10/boot/.gitignore create mode 100644 arch/cris/include/arch-v10/arch/Kbuild create mode 100644 arch/cris/include/arch-v10/arch/atomic.h create mode 100644 arch/cris/include/arch-v10/arch/bitops.h create mode 100644 arch/cris/include/arch-v10/arch/bug.h create mode 100644 arch/cris/include/arch-v10/arch/byteorder.h create mode 100644 arch/cris/include/arch-v10/arch/cache.h create mode 100644 arch/cris/include/arch-v10/arch/checksum.h create mode 100644 arch/cris/include/arch-v10/arch/delay.h create mode 100644 arch/cris/include/arch-v10/arch/dma.h create mode 100644 arch/cris/include/arch-v10/arch/elf.h create mode 100644 arch/cris/include/arch-v10/arch/io.h create mode 100644 arch/cris/include/arch-v10/arch/io_interface_mux.h create mode 100644 arch/cris/include/arch-v10/arch/irq.h create mode 100644 arch/cris/include/arch-v10/arch/memmap.h create mode 100644 arch/cris/include/arch-v10/arch/mmu.h create mode 100644 arch/cris/include/arch-v10/arch/offset.h create mode 100644 arch/cris/include/arch-v10/arch/page.h create mode 100644 arch/cris/include/arch-v10/arch/pgtable.h create mode 100644 arch/cris/include/arch-v10/arch/processor.h create mode 100644 arch/cris/include/arch-v10/arch/ptrace.h create mode 100644 arch/cris/include/arch-v10/arch/sv_addr.agh create mode 100644 arch/cris/include/arch-v10/arch/sv_addr_ag.h create mode 100644 arch/cris/include/arch-v10/arch/svinto.h create mode 100644 arch/cris/include/arch-v10/arch/system.h create mode 100644 arch/cris/include/arch-v10/arch/thread_info.h create mode 100644 arch/cris/include/arch-v10/arch/timex.h create mode 100644 arch/cris/include/arch-v10/arch/tlb.h create mode 100644 arch/cris/include/arch-v10/arch/uaccess.h create mode 100644 arch/cris/include/arch-v10/arch/unistd.h create mode 100644 arch/cris/include/arch-v10/arch/user.h create mode 100644 arch/cris/include/arch-v32/arch/Kbuild create mode 100644 arch/cris/include/arch-v32/arch/atomic.h create mode 100644 arch/cris/include/arch-v32/arch/bitops.h create mode 100644 arch/cris/include/arch-v32/arch/bug.h create mode 100644 arch/cris/include/arch-v32/arch/byteorder.h create mode 100644 arch/cris/include/arch-v32/arch/cache.h create mode 100644 arch/cris/include/arch-v32/arch/checksum.h create mode 100644 arch/cris/include/arch-v32/arch/cryptocop.h create mode 100644 arch/cris/include/arch-v32/arch/delay.h create mode 100644 arch/cris/include/arch-v32/arch/dma.h create mode 100644 arch/cris/include/arch-v32/arch/elf.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/Makefile create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/ata_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/bif_core_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/bif_dma_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/bif_slave_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/config_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/cpu_vect.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/cris_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/cris_supp_reg.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/dma_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/eth_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/gio_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/intr_vect.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/intr_vect_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/irq_nmi_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/marb_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/mmu_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/mmu_supp_reg.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/rt_trace_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/ser_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/sser_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/strcop_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/strmux_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/asm/timer_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/ata_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/bif_core_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/bif_dma_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/bif_slave_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/config_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/cpu_vect.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/dma.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/dma_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/eth_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/extmem_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/Makefile create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_crc_par_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_dmc_in_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_dmc_out_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_in_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_out_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_mpu_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_reg_space_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sap_in_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sap_out_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_scrc_in_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_scrc_out_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_spu_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_cfg_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_cpu_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_mpu_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_spu_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_timer_grp_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_trigger_grp_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_version_defs_asm.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_crc_par_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_dmc_in_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_dmc_out_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_in_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_in_extra_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_out_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_out_extra_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_mpu_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_mpu_macros.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_reg_space.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_sap_in_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_sap_out_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_scrc_in_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_scrc_out_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_spu_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_cfg_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_cpu_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_mpu_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_spu_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_timer_grp_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_trigger_grp_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/iop/iop_version_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/irq_nmi_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/marb_bp_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/marb_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/reg_rdwr.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/rt_trace_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/ser_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/sser_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/strcop.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/strcop_defs.h create mode 100644 arch/cris/include/arch-v32/arch/hwregs/supp_reg.h create mode 100644 arch/cris/include/arch-v32/arch/intmem.h create mode 100644 arch/cris/include/arch-v32/arch/io.h create mode 100644 arch/cris/include/arch-v32/arch/irq.h create mode 100644 arch/cris/include/arch-v32/arch/memmap.h create mode 100644 arch/cris/include/arch-v32/arch/mmu.h create mode 100644 arch/cris/include/arch-v32/arch/offset.h create mode 100644 arch/cris/include/arch-v32/arch/page.h create mode 100644 arch/cris/include/arch-v32/arch/pgtable.h create mode 100644 arch/cris/include/arch-v32/arch/processor.h create mode 100644 arch/cris/include/arch-v32/arch/ptrace.h create mode 100644 arch/cris/include/arch-v32/arch/spinlock.h create mode 100644 arch/cris/include/arch-v32/arch/system.h create mode 100644 arch/cris/include/arch-v32/arch/thread_info.h create mode 100644 arch/cris/include/arch-v32/arch/timex.h create mode 100644 arch/cris/include/arch-v32/arch/tlb.h create mode 100644 arch/cris/include/arch-v32/arch/uaccess.h create mode 100644 arch/cris/include/arch-v32/arch/unistd.h create mode 100644 arch/cris/include/arch-v32/arch/user.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/arbiter.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/dma.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/clkgen_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/ddr2_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/gio_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/pinmux_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/pio_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/reg_map_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/timer_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/clkgen_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/ddr2_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/gio_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/intr_vect.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/intr_vect_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_reg_space_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sap_in_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sap_out_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_cfg_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_cpu_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_mpu_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_spu_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_version_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_reg_space.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sap_in_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sap_out_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_cfg_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_cpu_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_mpu_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_spu_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_version_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/l2cache_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/marb_bar_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/marb_foo_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/pinmux_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/pio_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/reg_map.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/strmux_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/hwregs/timer_defs.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/memmap.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/pinmux.h create mode 100644 arch/cris/include/arch-v32/mach-a3/mach/startup.inc create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/arbiter.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/bif_core_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/config_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/gio_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/pinmux_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/reg_map_asm.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/timer_defs_asm.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_core_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_dma_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_slave_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/config_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/gio_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/intr_vect.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/intr_vect_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/marb_bp_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/marb_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/pinmux_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/reg_map.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/strmux_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/hwregs/timer_defs.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/pinmux.h create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/startup.inc create mode 100644 arch/cris/include/asm/Kbuild create mode 100644 arch/cris/include/asm/atomic.h create mode 100644 arch/cris/include/asm/auxvec.h create mode 100644 arch/cris/include/asm/axisflashmap.h create mode 100644 arch/cris/include/asm/bitops.h create mode 100644 arch/cris/include/asm/bug.h create mode 100644 arch/cris/include/asm/bugs.h create mode 100644 arch/cris/include/asm/byteorder.h create mode 100644 arch/cris/include/asm/cache.h create mode 100644 arch/cris/include/asm/cacheflush.h create mode 100644 arch/cris/include/asm/checksum.h create mode 100644 arch/cris/include/asm/cputime.h create mode 100644 arch/cris/include/asm/current.h create mode 100644 arch/cris/include/asm/delay.h create mode 100644 arch/cris/include/asm/device.h create mode 100644 arch/cris/include/asm/div64.h create mode 100644 arch/cris/include/asm/dma-mapping.h create mode 100644 arch/cris/include/asm/dma.h create mode 100644 arch/cris/include/asm/elf.h create mode 100644 arch/cris/include/asm/emergency-restart.h create mode 100644 arch/cris/include/asm/errno.h create mode 100644 arch/cris/include/asm/eshlibld.h create mode 100644 arch/cris/include/asm/ethernet.h create mode 100644 arch/cris/include/asm/etraxgpio.h create mode 100644 arch/cris/include/asm/etraxi2c.h create mode 100644 arch/cris/include/asm/fasttimer.h create mode 100644 arch/cris/include/asm/fb.h create mode 100644 arch/cris/include/asm/fcntl.h create mode 100644 arch/cris/include/asm/futex.h create mode 100644 arch/cris/include/asm/hardirq.h create mode 100644 arch/cris/include/asm/hw_irq.h create mode 100644 arch/cris/include/asm/io.h create mode 100644 arch/cris/include/asm/ioctl.h create mode 100644 arch/cris/include/asm/ioctls.h create mode 100644 arch/cris/include/asm/ipcbuf.h create mode 100644 arch/cris/include/asm/irq.h create mode 100644 arch/cris/include/asm/irq_regs.h create mode 100644 arch/cris/include/asm/kdebug.h create mode 100644 arch/cris/include/asm/kmap_types.h create mode 100644 arch/cris/include/asm/linkage.h create mode 100644 arch/cris/include/asm/local.h create mode 100644 arch/cris/include/asm/mman.h create mode 100644 arch/cris/include/asm/mmu.h create mode 100644 arch/cris/include/asm/mmu_context.h create mode 100644 arch/cris/include/asm/module.h create mode 100644 arch/cris/include/asm/msgbuf.h create mode 100644 arch/cris/include/asm/mutex.h create mode 100644 arch/cris/include/asm/page.h create mode 100644 arch/cris/include/asm/param.h create mode 100644 arch/cris/include/asm/pci.h create mode 100644 arch/cris/include/asm/percpu.h create mode 100644 arch/cris/include/asm/pgalloc.h create mode 100644 arch/cris/include/asm/pgtable.h create mode 100644 arch/cris/include/asm/poll.h create mode 100644 arch/cris/include/asm/posix_types.h create mode 100644 arch/cris/include/asm/processor.h create mode 100644 arch/cris/include/asm/ptrace.h create mode 100644 arch/cris/include/asm/resource.h create mode 100644 arch/cris/include/asm/rs485.h create mode 100644 arch/cris/include/asm/rtc.h create mode 100644 arch/cris/include/asm/scatterlist.h create mode 100644 arch/cris/include/asm/sections.h create mode 100644 arch/cris/include/asm/segment.h create mode 100644 arch/cris/include/asm/sembuf.h create mode 100644 arch/cris/include/asm/setup.h create mode 100644 arch/cris/include/asm/shmbuf.h create mode 100644 arch/cris/include/asm/shmparam.h create mode 100644 arch/cris/include/asm/sigcontext.h create mode 100644 arch/cris/include/asm/siginfo.h create mode 100644 arch/cris/include/asm/signal.h create mode 100644 arch/cris/include/asm/smp.h create mode 100644 arch/cris/include/asm/socket.h create mode 100644 arch/cris/include/asm/sockios.h create mode 100644 arch/cris/include/asm/spinlock.h create mode 100644 arch/cris/include/asm/stat.h create mode 100644 arch/cris/include/asm/statfs.h create mode 100644 arch/cris/include/asm/string.h create mode 100644 arch/cris/include/asm/sync_serial.h create mode 100644 arch/cris/include/asm/system.h create mode 100644 arch/cris/include/asm/termbits.h create mode 100644 arch/cris/include/asm/termios.h create mode 100644 arch/cris/include/asm/thread_info.h create mode 100644 arch/cris/include/asm/timex.h create mode 100644 arch/cris/include/asm/tlb.h create mode 100644 arch/cris/include/asm/tlbflush.h create mode 100644 arch/cris/include/asm/topology.h create mode 100644 arch/cris/include/asm/types.h create mode 100644 arch/cris/include/asm/uaccess.h create mode 100644 arch/cris/include/asm/ucontext.h create mode 100644 arch/cris/include/asm/unaligned.h create mode 100644 arch/cris/include/asm/unistd.h create mode 100644 arch/cris/include/asm/user.h delete mode 100644 include/asm-cris/Kbuild delete mode 100644 include/asm-cris/arch-v10/Kbuild delete mode 100644 include/asm-cris/arch-v10/atomic.h delete mode 100644 include/asm-cris/arch-v10/bitops.h delete mode 100644 include/asm-cris/arch-v10/bug.h delete mode 100644 include/asm-cris/arch-v10/byteorder.h delete mode 100644 include/asm-cris/arch-v10/cache.h delete mode 100644 include/asm-cris/arch-v10/checksum.h delete mode 100644 include/asm-cris/arch-v10/delay.h delete mode 100644 include/asm-cris/arch-v10/dma.h delete mode 100644 include/asm-cris/arch-v10/elf.h delete mode 100644 include/asm-cris/arch-v10/io.h delete mode 100644 include/asm-cris/arch-v10/io_interface_mux.h delete mode 100644 include/asm-cris/arch-v10/irq.h delete mode 100644 include/asm-cris/arch-v10/memmap.h delete mode 100644 include/asm-cris/arch-v10/mmu.h delete mode 100644 include/asm-cris/arch-v10/offset.h delete mode 100644 include/asm-cris/arch-v10/page.h delete mode 100644 include/asm-cris/arch-v10/pgtable.h delete mode 100644 include/asm-cris/arch-v10/processor.h delete mode 100644 include/asm-cris/arch-v10/ptrace.h delete mode 100644 include/asm-cris/arch-v10/sv_addr.agh delete mode 100644 include/asm-cris/arch-v10/sv_addr_ag.h delete mode 100644 include/asm-cris/arch-v10/svinto.h delete mode 100644 include/asm-cris/arch-v10/system.h delete mode 100644 include/asm-cris/arch-v10/thread_info.h delete mode 100644 include/asm-cris/arch-v10/timex.h delete mode 100644 include/asm-cris/arch-v10/tlb.h delete mode 100644 include/asm-cris/arch-v10/uaccess.h delete mode 100644 include/asm-cris/arch-v10/unistd.h delete mode 100644 include/asm-cris/arch-v10/user.h delete mode 100644 include/asm-cris/arch-v32/Kbuild delete mode 100644 include/asm-cris/arch-v32/arbiter.h delete mode 100644 include/asm-cris/arch-v32/atomic.h delete mode 100644 include/asm-cris/arch-v32/bitops.h delete mode 100644 include/asm-cris/arch-v32/bug.h delete mode 100644 include/asm-cris/arch-v32/byteorder.h delete mode 100644 include/asm-cris/arch-v32/cache.h delete mode 100644 include/asm-cris/arch-v32/checksum.h delete mode 100644 include/asm-cris/arch-v32/cryptocop.h delete mode 100644 include/asm-cris/arch-v32/delay.h delete mode 100644 include/asm-cris/arch-v32/dma.h delete mode 100644 include/asm-cris/arch-v32/elf.h delete mode 100644 include/asm-cris/arch-v32/hwregs/Makefile delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/cris_supp_reg.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/intr_vect.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/mmu_supp_reg.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/ata_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/bif_core_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/bif_dma_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/bif_slave_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/config_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/cpu_vect.h delete mode 100644 include/asm-cris/arch-v32/hwregs/dma.h delete mode 100644 include/asm-cris/arch-v32/hwregs/dma_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/eth_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/extmem_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/gio_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/intr_vect.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/Makefile delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/marb_bp_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/marb_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/pinmux_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/reg_rdwr.h delete mode 100644 include/asm-cris/arch-v32/hwregs/rt_trace_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/ser_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/sser_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/strcop.h delete mode 100644 include/asm-cris/arch-v32/hwregs/strcop_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/strmux_defs.h delete mode 100644 include/asm-cris/arch-v32/hwregs/supp_reg.h delete mode 100644 include/asm-cris/arch-v32/intmem.h delete mode 100644 include/asm-cris/arch-v32/io.h delete mode 100644 include/asm-cris/arch-v32/irq.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/arbiter.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/dma.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/asm/clkgen_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/asm/ddr2_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/asm/gio_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/asm/pinmux_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/asm/pio_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/asm/reg_map_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/asm/timer_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/clkgen_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/ddr2_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/gio_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_reg_space_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_in_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_out_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cfg_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cpu_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_mpu_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_spu_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_version_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_reg_space.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_in_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_out_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cfg_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cpu_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_mpu_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_spu_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_version_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/l2cache_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/marb_bar_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/marb_foo_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/pinmux_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/pio_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/reg_map.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/strmux_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/hwregs/timer_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/memmap.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/pinmux.h delete mode 100644 include/asm-cris/arch-v32/mach-a3/startup.inc delete mode 100644 include/asm-cris/arch-v32/mach-fs/arbiter.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/asm/bif_core_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/asm/config_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/asm/gio_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/asm/pinmux_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/asm/reg_map_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/asm/timer_defs_asm.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/bif_core_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/bif_dma_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/bif_slave_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/config_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/gio_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/marb_bp_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/marb_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/pinmux_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/reg_map.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/strmux_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/hwregs/timer_defs.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/pinmux.h delete mode 100644 include/asm-cris/arch-v32/mach-fs/startup.inc delete mode 100644 include/asm-cris/arch-v32/memmap.h delete mode 100644 include/asm-cris/arch-v32/mmu.h delete mode 100644 include/asm-cris/arch-v32/offset.h delete mode 100644 include/asm-cris/arch-v32/page.h delete mode 100644 include/asm-cris/arch-v32/pgtable.h delete mode 100644 include/asm-cris/arch-v32/pinmux.h delete mode 100644 include/asm-cris/arch-v32/processor.h delete mode 100644 include/asm-cris/arch-v32/ptrace.h delete mode 100644 include/asm-cris/arch-v32/spinlock.h delete mode 100644 include/asm-cris/arch-v32/system.h delete mode 100644 include/asm-cris/arch-v32/thread_info.h delete mode 100644 include/asm-cris/arch-v32/timex.h delete mode 100644 include/asm-cris/arch-v32/tlb.h delete mode 100644 include/asm-cris/arch-v32/uaccess.h delete mode 100644 include/asm-cris/arch-v32/unistd.h delete mode 100644 include/asm-cris/arch-v32/user.h delete mode 100644 include/asm-cris/atomic.h delete mode 100644 include/asm-cris/auxvec.h delete mode 100644 include/asm-cris/axisflashmap.h delete mode 100644 include/asm-cris/bitops.h delete mode 100644 include/asm-cris/bug.h delete mode 100644 include/asm-cris/bugs.h delete mode 100644 include/asm-cris/byteorder.h delete mode 100644 include/asm-cris/cache.h delete mode 100644 include/asm-cris/cacheflush.h delete mode 100644 include/asm-cris/checksum.h delete mode 100644 include/asm-cris/cputime.h delete mode 100644 include/asm-cris/current.h delete mode 100644 include/asm-cris/delay.h delete mode 100644 include/asm-cris/device.h delete mode 100644 include/asm-cris/div64.h delete mode 100644 include/asm-cris/dma-mapping.h delete mode 100644 include/asm-cris/dma.h delete mode 100644 include/asm-cris/elf.h delete mode 100644 include/asm-cris/emergency-restart.h delete mode 100644 include/asm-cris/errno.h delete mode 100644 include/asm-cris/eshlibld.h delete mode 100644 include/asm-cris/ethernet.h delete mode 100644 include/asm-cris/etraxgpio.h delete mode 100644 include/asm-cris/etraxi2c.h delete mode 100644 include/asm-cris/fasttimer.h delete mode 100644 include/asm-cris/fb.h delete mode 100644 include/asm-cris/fcntl.h delete mode 100644 include/asm-cris/futex.h delete mode 100644 include/asm-cris/hardirq.h delete mode 100644 include/asm-cris/hw_irq.h delete mode 100644 include/asm-cris/io.h delete mode 100644 include/asm-cris/ioctl.h delete mode 100644 include/asm-cris/ioctls.h delete mode 100644 include/asm-cris/ipcbuf.h delete mode 100644 include/asm-cris/irq.h delete mode 100644 include/asm-cris/irq_regs.h delete mode 100644 include/asm-cris/kdebug.h delete mode 100644 include/asm-cris/kmap_types.h delete mode 100644 include/asm-cris/linkage.h delete mode 100644 include/asm-cris/local.h delete mode 100644 include/asm-cris/mman.h delete mode 100644 include/asm-cris/mmu.h delete mode 100644 include/asm-cris/mmu_context.h delete mode 100644 include/asm-cris/module.h delete mode 100644 include/asm-cris/msgbuf.h delete mode 100644 include/asm-cris/mutex.h delete mode 100644 include/asm-cris/page.h delete mode 100644 include/asm-cris/param.h delete mode 100644 include/asm-cris/pci.h delete mode 100644 include/asm-cris/percpu.h delete mode 100644 include/asm-cris/pgalloc.h delete mode 100644 include/asm-cris/pgtable.h delete mode 100644 include/asm-cris/poll.h delete mode 100644 include/asm-cris/posix_types.h delete mode 100644 include/asm-cris/processor.h delete mode 100644 include/asm-cris/ptrace.h delete mode 100644 include/asm-cris/resource.h delete mode 100644 include/asm-cris/rs485.h delete mode 100644 include/asm-cris/rtc.h delete mode 100644 include/asm-cris/scatterlist.h delete mode 100644 include/asm-cris/sections.h delete mode 100644 include/asm-cris/segment.h delete mode 100644 include/asm-cris/sembuf.h delete mode 100644 include/asm-cris/setup.h delete mode 100644 include/asm-cris/shmbuf.h delete mode 100644 include/asm-cris/shmparam.h delete mode 100644 include/asm-cris/sigcontext.h delete mode 100644 include/asm-cris/siginfo.h delete mode 100644 include/asm-cris/signal.h delete mode 100644 include/asm-cris/smp.h delete mode 100644 include/asm-cris/socket.h delete mode 100644 include/asm-cris/sockios.h delete mode 100644 include/asm-cris/spinlock.h delete mode 100644 include/asm-cris/stat.h delete mode 100644 include/asm-cris/statfs.h delete mode 100644 include/asm-cris/string.h delete mode 100644 include/asm-cris/sync_serial.h delete mode 100644 include/asm-cris/system.h delete mode 100644 include/asm-cris/termbits.h delete mode 100644 include/asm-cris/termios.h delete mode 100644 include/asm-cris/thread_info.h delete mode 100644 include/asm-cris/timex.h delete mode 100644 include/asm-cris/tlb.h delete mode 100644 include/asm-cris/tlbflush.h delete mode 100644 include/asm-cris/topology.h delete mode 100644 include/asm-cris/types.h delete mode 100644 include/asm-cris/uaccess.h delete mode 100644 include/asm-cris/ucontext.h delete mode 100644 include/asm-cris/unaligned.h delete mode 100644 include/asm-cris/unistd.h delete mode 100644 include/asm-cris/user.h diff --git a/arch/cris/Makefile b/arch/cris/Makefile index c6f5f5a2ffdf..22825a7bbe57 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -23,12 +23,16 @@ mach-$(CONFIG_ETRAXFS) := fs ifneq ($(arch-y),) SARCH := arch-$(arch-y) +inc := -Iarch/cris/include/arch-$(arch-y) -Iarch/cris/include/arch-$(arch-y)/arch else SARCH := +inc := endif ifneq ($(mach-y),) MACH := mach-$(mach-y) +inc += -Iarch/cris/include/$(SARCH)/$(MACH)/ +inc += -Iarch/cris/include/$(SARCH)/$(MACH)/mach else MACH := endif @@ -39,9 +43,9 @@ OBJCOPYFLAGS := -O binary -R .note -R .comment -S CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE) -KBUILD_AFLAGS += -mlinux -march=$(arch-y) -Iinclude/asm/arch/mach -Iinclude/asm/arch - -KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe -Iinclude/asm/arch/mach -Iinclude/asm/arch +KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc) +KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc) +KBUILD_CPPFLAGS += $(inc) ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g @@ -73,7 +77,7 @@ all: zImage zImage Image: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch FORCE +archprepare: $(SRC_ARCH)/.links FORCE # Create some links to make all tools happy $(SRC_ARCH)/.links: @@ -95,17 +99,6 @@ endif @ln -sfn ../$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c @touch $@ -# Create link to sub arch includes -$(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h) - @echo ' SYMLINK include/asm-$(ARCH)/arch -> include/asm-$(ARCH)/$(SARCH)' - @rm -f $(srctree)/include/asm-$(ARCH)/arch/mach - @rm -f $(srctree)/include/asm-$(ARCH)/arch - @ln -sf $(SARCH) $(srctree)/include/asm-$(ARCH)/arch -ifdef CONFIG_ETRAX_ARCH_V32 - @ln -sf $(MACH) $(srctree)/include/asm-$(ARCH)/arch/mach -endif - @touch $@ - archclean: $(Q)if [ -e arch/$(ARCH)/boot ]; then \ $(MAKE) $(clean)=arch/$(ARCH)/boot; \ @@ -116,8 +109,7 @@ CLEAN_FILES += \ $(MACHINE)/boot/compressed/decompress.bin \ $(MACHINE)/boot/compressed/piggy.gz \ $(MACHINE)/boot/rescue/rescue.bin \ - $(SRC_ARCH)/.links \ - $(srctree)/include/asm-$(ARCH)/.arch + $(SRC_ARCH)/.links MRPROPER_FILES += \ $(SRC_ARCH)/drivers \ diff --git a/arch/cris/arch-v10/boot/.gitignore b/arch/cris/arch-v10/boot/.gitignore new file mode 100644 index 000000000000..171a0853caf8 --- /dev/null +++ b/arch/cris/arch-v10/boot/.gitignore @@ -0,0 +1,2 @@ +Image +zImage diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S index 981fbae84959..0bb4dcc29254 100644 --- a/arch/cris/arch-v10/boot/compressed/head.S +++ b/arch/cris/arch-v10/boot/compressed/head.S @@ -9,7 +9,7 @@ */ #define ASSEMBLER_MACROS_ONLY -#include +#include #define RAM_INIT_MAGIC 0x56902387 #define COMMAND_LINE_MAGIC 0x87109563 diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c index d933c89889db..a4db1507d3b1 100644 --- a/arch/cris/arch-v10/boot/compressed/misc.c +++ b/arch/cris/arch-v10/boot/compressed/misc.c @@ -20,7 +20,7 @@ #include -#include +#include /* * gzip declarations diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/arch-v10/boot/rescue/head.S index 6ba7be8ac4a0..fb503d1eeea4 100644 --- a/arch/cris/arch-v10/boot/rescue/head.S +++ b/arch/cris/arch-v10/boot/rescue/head.S @@ -65,7 +65,7 @@ #ifdef CONFIG_ETRAX_AXISFLASHMAP #define ASSEMBLER_MACROS_ONLY -#include +#include ;; The partitiontable is looked for at the first sector after the boot ;; sector. Sector size is 65536 bytes in all flashes we use. diff --git a/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/arch/cris/arch-v10/boot/rescue/kimagerescue.S index 55eeff8bb08e..6f7b3e61260b 100644 --- a/arch/cris/arch-v10/boot/rescue/kimagerescue.S +++ b/arch/cris/arch-v10/boot/rescue/kimagerescue.S @@ -6,7 +6,7 @@ */ #define ASSEMBLER_MACROS_ONLY -#include +#include #define CODE_START 0x40004000 #define CODE_LENGTH 784 diff --git a/arch/cris/arch-v10/boot/rescue/testrescue.S b/arch/cris/arch-v10/boot/rescue/testrescue.S index 2d937f9afe23..fc7ec674eca5 100644 --- a/arch/cris/arch-v10/boot/rescue/testrescue.S +++ b/arch/cris/arch-v10/boot/rescue/testrescue.S @@ -6,7 +6,7 @@ */ #define ASSEMBLER_MACROS_ONLY -#include +#include .text diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c index b3bdda93ffef..b2079703af7e 100644 --- a/arch/cris/arch-v10/drivers/axisflashmap.c +++ b/arch/cris/arch-v10/drivers/axisflashmap.c @@ -26,7 +26,7 @@ #include #include -#include +#include #ifdef CONFIG_CRIS_LOW_MAP #define FLASH_UNCACHED_ADDR KSEG_8 diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c index 3bdfaf43390c..77630df94343 100644 --- a/arch/cris/arch-v10/drivers/ds1302.c +++ b/arch/cris/arch-v10/drivers/ds1302.c @@ -24,10 +24,10 @@ #include #include -#include +#include #include #include -#include +#include #include "i2c.h" diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c index 86048e697eb5..4b0f65fac8e8 100644 --- a/arch/cris/arch-v10/drivers/gpio.c +++ b/arch/cris/arch-v10/drivers/gpio.c @@ -23,11 +23,11 @@ #include #include -#include +#include #include #include #include -#include +#include #define GPIO_MAJOR 120 /* experimental MAJOR number */ diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c index 2797e67ce4f4..7f656ae0b21d 100644 --- a/arch/cris/arch-v10/drivers/i2c.c +++ b/arch/cris/arch-v10/drivers/i2c.c @@ -25,10 +25,10 @@ #include #include -#include +#include #include #include -#include +#include #include "i2c.h" diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index 91fea623c7c9..6cc1a0319a5d 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -26,11 +26,11 @@ #include #include #include -#include +#include #include #include #include -#include +#include /* The receiver is a bit tricky beacuse of the continuous stream of data.*/ /* */ diff --git a/arch/cris/arch-v10/kernel/crisksyms.c b/arch/cris/arch-v10/kernel/crisksyms.c index e6b80135502f..1ca6fc283232 100644 --- a/arch/cris/arch-v10/kernel/crisksyms.c +++ b/arch/cris/arch-v10/kernel/crisksyms.c @@ -1,6 +1,6 @@ #include #include -#include +#include /* Export shadow registers for the CPU I/O pins */ EXPORT_SYMBOL(genconfig_shadow); diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c index 3dc6e91ba39e..99851ba8e5fa 100644 --- a/arch/cris/arch-v10/kernel/debugport.c +++ b/arch/cris/arch-v10/kernel/debugport.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include /* Get SIMCOUT. */ extern void reset_watchdog(void); diff --git a/arch/cris/arch-v10/kernel/dma.c b/arch/cris/arch-v10/kernel/dma.c index eb1fa0d2b49f..929e68666299 100644 --- a/arch/cris/arch-v10/kernel/dma.c +++ b/arch/cris/arch-v10/kernel/dma.c @@ -7,7 +7,7 @@ #include #include -#include +#include /* Macro to access ETRAX 100 registers */ #define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \ diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 3a65f322ae07..ed171d389e65 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index 31ff35cff02c..5ff08a8695e9 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -24,7 +24,7 @@ #include -#include +#include #include #include diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S index 96344afc4ebc..fc4577102933 100644 --- a/arch/cris/arch-v10/kernel/head.S +++ b/arch/cris/arch-v10/kernel/head.S @@ -10,7 +10,7 @@ #define ASSEMBLER_MACROS_ONLY /* The IO_* macros use the ## token concatenation operator, so -traditional must not be used when assembling this file. */ -#include +#include #define CRAMFS_MAGIC 0x28cd3d45 #define RAM_INIT_MAGIC 0x56902387 diff --git a/arch/cris/arch-v10/kernel/io_interface_mux.c b/arch/cris/arch-v10/kernel/io_interface_mux.c index add98e0941b5..29f97e962795 100644 --- a/arch/cris/arch-v10/kernel/io_interface_mux.c +++ b/arch/cris/arch-v10/kernel/io_interface_mux.c @@ -11,9 +11,9 @@ #include #include -#include +#include #include -#include +#include #define DBG(s) diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 6fea45f2e40c..b9f9c8ce2169 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -176,7 +176,7 @@ #include #include -#include +#include #include static int kgdb_started = 0; diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c index 53117f07cc1a..bd9b3ff63f6c 100644 --- a/arch/cris/arch-v10/kernel/process.c +++ b/arch/cris/arch-v10/kernel/process.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #ifdef CONFIG_ETRAX_GPIO diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index 525483f0ddf8..c685ba4c3387 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/cris/arch-v10/kernel/traps.c b/arch/cris/arch-v10/kernel/traps.c index 9eada5d8893b..8bebb96bbca1 100644 --- a/arch/cris/arch-v10/kernel/traps.c +++ b/arch/cris/arch-v10/kernel/traps.c @@ -10,7 +10,7 @@ #include #include -#include +#include void show_registers(struct pt_regs *regs) diff --git a/arch/cris/arch-v10/mm/fault.c b/arch/cris/arch-v10/mm/fault.c index 65504fd80928..087a2096f221 100644 --- a/arch/cris/arch-v10/mm/fault.c +++ b/arch/cris/arch-v10/mm/fault.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include /* debug of low-level TLB reload */ diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c index 742fd1974c2e..baa746ce4e74 100644 --- a/arch/cris/arch-v10/mm/init.c +++ b/arch/cris/arch-v10/mm/init.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include extern void tlb_init(void); diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c index 6baf5bd209e7..4a496e4ffacc 100644 --- a/arch/cris/arch-v10/mm/tlb.c +++ b/arch/cris/arch-v10/mm/tlb.c @@ -12,7 +12,7 @@ #include #include -#include +#include #define D(x) diff --git a/arch/cris/arch-v32/boot/compressed/head.S b/arch/cris/arch-v32/boot/compressed/head.S index f86208caf32d..ea3012993b07 100644 --- a/arch/cris/arch-v32/boot/compressed/head.S +++ b/arch/cris/arch-v32/boot/compressed/head.S @@ -7,7 +7,7 @@ #define ASSEMBLER_MACROS_ONLY #include -#include +#include #define RAM_INIT_MAGIC 0x56902387 #define COMMAND_LINE_MAGIC 0x87109563 @@ -17,7 +17,7 @@ .globl input_data .text -start: +_start: di ;; Start clocks for used blocks. diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c index ef98608e5067..7a87bc0ae2e8 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #ifdef CONFIG_ETRAX_VIRTUAL_GPIO #include "../i2c.h" diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c index 01ed0be2d0d1..25d6f2b3a721 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c index aa01b134458a..c5a0f54763cc 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c index 5b79a7a772d4..77ee319193c3 100644 --- a/arch/cris/arch-v32/drivers/pci/bios.c +++ b/arch/cris/arch-v32/drivers/pci/bios.c @@ -1,6 +1,6 @@ #include #include -#include +#include void __devinit pcibios_fixup_bus(struct pci_bus *b) { diff --git a/arch/cris/arch-v32/kernel/cache.c b/arch/cris/arch-v32/kernel/cache.c index 80da7b88a72b..f38433b1f861 100644 --- a/arch/cris/arch-v32/kernel/cache.c +++ b/arch/cris/arch-v32/kernel/cache.c @@ -1,7 +1,7 @@ #include #include -#include -#include +#include +#include /* This file is used to workaround a cache bug, Guinness TR 106. */ diff --git a/arch/cris/arch-v32/kernel/crisksyms.c b/arch/cris/arch-v32/kernel/crisksyms.c index 77d02c15a7fc..64933e2c0f5b 100644 --- a/arch/cris/arch-v32/kernel/crisksyms.c +++ b/arch/cris/arch-v32/kernel/crisksyms.c @@ -1,9 +1,9 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include /* Functions for allocating DMA channels */ EXPORT_SYMBOL(crisv32_request_dma); diff --git a/arch/cris/arch-v32/kernel/debugport.c b/arch/cris/arch-v32/kernel/debugport.c index 15af4c293157..794b364d9f7d 100644 --- a/arch/cris/arch-v32/kernel/debugport.c +++ b/arch/cris/arch-v32/kernel/debugport.c @@ -9,7 +9,7 @@ #include #include #include -#include +#include struct dbg_port { diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index eebbaba45430..7f6f93e6b70e 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -24,8 +24,8 @@ #include #include -#include -#include +#include +#include ;; Exported functions. .globl system_call diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S index 2d66a7c320e1..f902d87fb5de 100644 --- a/arch/cris/arch-v32/kernel/head.S +++ b/arch/cris/arch-v32/kernel/head.S @@ -11,11 +11,11 @@ * -traditional must not be used when assembling this file. */ #include -#include +#include #include #include #include -#include +#include #define CRAMFS_MAGIC 0x28cd3d45 #define JHEAD_MAGIC 0x1FF528A6 diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c index 8bd5a5bc0dc7..c981fd663323 100644 --- a/arch/cris/arch-v32/kernel/kgdb.c +++ b/arch/cris/arch-v32/kernel/kgdb.c @@ -174,10 +174,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include /* From entry.S. */ extern void gdb_handle_exception(void); diff --git a/arch/cris/arch-v32/kernel/kgdb_asm.S b/arch/cris/arch-v32/kernel/kgdb_asm.S index 3e7fa9ef8510..eba93e7e4aad 100644 --- a/arch/cris/arch-v32/kernel/kgdb_asm.S +++ b/arch/cris/arch-v32/kernel/kgdb_asm.S @@ -5,7 +5,7 @@ * port exceptions for kernel debugging purposes. */ -#include +#include ;; Exported functions. .globl kgdb_handle_exception diff --git a/arch/cris/arch-v32/kernel/pinmux.c b/arch/cris/arch-v32/kernel/pinmux.c index a2b8aa37c1bf..6eb54ea1c976 100644 --- a/arch/cris/arch-v32/kernel/pinmux.c +++ b/arch/cris/arch-v32/kernel/pinmux.c @@ -11,10 +11,10 @@ #include #include #include -#include -#include -#include -#include +#include +#include +#include +#include #undef DEBUG diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c index e27f4670e88e..dd401473f5b5 100644 --- a/arch/cris/arch-v32/kernel/ptrace.c +++ b/arch/cris/arch-v32/kernel/ptrace.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include /* * Determines which bits in CCS the user has access to. diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index 58c1866804e3..da7d2be000ba 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -18,8 +18,8 @@ #include #include #include -#include -#include +#include +#include extern unsigned long cris_signal_return_page; diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S index e019816facd7..e705f5cce969 100644 --- a/arch/cris/arch-v32/lib/nand_init.S +++ b/arch/cris/arch-v32/lib/nand_init.S @@ -22,11 +22,11 @@ ## ##============================================================================= -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include ;; There are 8-bit NAND flashes and 16-bit NAND flashes. ;; We need to treat them slightly different. diff --git a/arch/cris/arch-v32/mach-a3/dma.c b/arch/cris/arch-v32/mach-a3/dma.c index 25f236ef0b81..f35e4f65f4ef 100644 --- a/arch/cris/arch-v32/mach-a3/dma.c +++ b/arch/cris/arch-v32/mach-a3/dma.c @@ -2,7 +2,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/cris/arch-v32/mach-a3/io.c b/arch/cris/arch-v32/mach-a3/io.c index 9eeaf3eca474..c22f67ecd9f3 100644 --- a/arch/cris/arch-v32/mach-a3/io.c +++ b/arch/cris/arch-v32/mach-a3/io.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include struct crisv32_ioport crisv32_ioports[] = { diff --git a/arch/cris/arch-v32/mach-fs/cpufreq.c b/arch/cris/arch-v32/mach-fs/cpufreq.c index 58bd71e5bda9..d92cf70d1cbe 100644 --- a/arch/cris/arch-v32/mach-fs/cpufreq.c +++ b/arch/cris/arch-v32/mach-fs/cpufreq.c @@ -2,9 +2,9 @@ #include #include #include -#include -#include -#include +#include +#include +#include static int cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, diff --git a/arch/cris/arch-v32/mach-fs/dma.c b/arch/cris/arch-v32/mach-fs/dma.c index a6acf4e6345c..2d970d7505c9 100644 --- a/arch/cris/arch-v32/mach-fs/dma.c +++ b/arch/cris/arch-v32/mach-fs/dma.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include static char used_dma_channels[MAX_DMA_CHANNELS]; static const char *used_dma_channels_users[MAX_DMA_CHANNELS]; diff --git a/arch/cris/arch-v32/mach-fs/io.c b/arch/cris/arch-v32/mach-fs/io.c index a03a3ad3a188..cb6327b1f8f8 100644 --- a/arch/cris/arch-v32/mach-fs/io.c +++ b/arch/cris/arch-v32/mach-fs/io.c @@ -12,8 +12,8 @@ #include #include #include -#include -#include +#include +#include #ifndef DEBUG #define DEBUG(x) diff --git a/arch/cris/arch-v32/mach-fs/vcs_hook.c b/arch/cris/arch-v32/mach-fs/vcs_hook.c index 593b10f07ef1..b11594ae0cb6 100644 --- a/arch/cris/arch-v32/mach-fs/vcs_hook.c +++ b/arch/cris/arch-v32/mach-fs/vcs_hook.c @@ -5,8 +5,8 @@ #include "vcs_hook.h" #include -#include -#include +#include +#include #define HOOK_TRIG_ADDR 0xb7000000 /* hook cvlog model reg address */ #define HOOK_MEM_BASE_ADDR 0xa0000000 /* csp4 (shared mem) base addr */ diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c index 8a34b8b74293..caeb921a92ea 100644 --- a/arch/cris/arch-v32/mm/init.c +++ b/arch/cris/arch-v32/mm/init.c @@ -16,8 +16,8 @@ #include #include #include -#include -#include +#include +#include extern void tlb_init(void); diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c index eda5ebcaea54..55ade36fe8a8 100644 --- a/arch/cris/arch-v32/mm/tlb.c +++ b/arch/cris/arch-v32/mm/tlb.c @@ -9,8 +9,8 @@ #include #include -#include -#include +#include +#include #define UPDATE_TLB_SEL_IDX(val) \ do { \ diff --git a/arch/cris/include/arch-v10/arch/Kbuild b/arch/cris/include/arch-v10/arch/Kbuild new file mode 100644 index 000000000000..7a192e1290b1 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/Kbuild @@ -0,0 +1,4 @@ +header-y += user.h +header-y += svinto.h +header-y += sv_addr_ag.h +header-y += sv_addr.agh diff --git a/arch/cris/include/arch-v10/arch/atomic.h b/arch/cris/include/arch-v10/arch/atomic.h new file mode 100644 index 000000000000..6ef5e7d09024 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/atomic.h @@ -0,0 +1,7 @@ +#ifndef __ASM_CRIS_ARCH_ATOMIC__ +#define __ASM_CRIS_ARCH_ATOMIC__ + +#define cris_atomic_save(addr, flags) local_irq_save(flags); +#define cris_atomic_restore(addr, flags) local_irq_restore(flags); + +#endif diff --git a/arch/cris/include/arch-v10/arch/bitops.h b/arch/cris/include/arch-v10/arch/bitops.h new file mode 100644 index 000000000000..be85f6de25d3 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/bitops.h @@ -0,0 +1,73 @@ +/* asm/arch/bitops.h for Linux/CRISv10 */ + +#ifndef _CRIS_ARCH_BITOPS_H +#define _CRIS_ARCH_BITOPS_H + +/* + * Helper functions for the core of the ff[sz] functions, wrapping the + * syntactically awkward asms. The asms compute the number of leading + * zeroes of a bits-in-byte and byte-in-word and word-in-dword-swapped + * number. They differ in that the first function also inverts all bits + * in the input. + */ +static inline unsigned long cris_swapnwbrlz(unsigned long w) +{ + /* Let's just say we return the result in the same register as the + input. Saying we clobber the input but can return the result + in another register: + ! __asm__ ("swapnwbr %2\n\tlz %2,%0" + ! : "=r,r" (res), "=r,X" (dummy) : "1,0" (w)); + confuses gcc (sched.c, gcc from cris-dist-1.14). */ + + unsigned long res; + __asm__ ("swapnwbr %0 \n\t" + "lz %0,%0" + : "=r" (res) : "0" (w)); + return res; +} + +static inline unsigned long cris_swapwbrlz(unsigned long w) +{ + unsigned res; + __asm__ ("swapwbr %0 \n\t" + "lz %0,%0" + : "=r" (res) + : "0" (w)); + return res; +} + +/* + * ffz = Find First Zero in word. Undefined if no zero exists, + * so code should check against ~0UL first.. + */ +static inline unsigned long ffz(unsigned long w) +{ + return cris_swapnwbrlz(w); +} + +/** + * __ffs - find first bit in word. + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline unsigned long __ffs(unsigned long word) +{ + return cris_swapnwbrlz(~word); +} + +/** + * ffs - find first bit set + * @x: the word to search + * + * This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ + +static inline unsigned long kernel_ffs(unsigned long w) +{ + return w ? cris_swapwbrlz (w) + 1 : 0; +} + +#endif diff --git a/arch/cris/include/arch-v10/arch/bug.h b/arch/cris/include/arch-v10/arch/bug.h new file mode 100644 index 000000000000..3485d6b34bb0 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/bug.h @@ -0,0 +1,66 @@ +#ifndef __ASM_CRISv10_ARCH_BUG_H +#define __ASM_CRISv10_ARCH_BUG_H + +#include + +#ifdef CONFIG_BUG +#ifdef CONFIG_DEBUG_BUGVERBOSE +/* The BUG() macro is used for marking obviously incorrect code paths. + * It will cause a message with the file name and line number to be printed, + * and then cause an oops. The message is actually printed by handle_BUG() + * in arch/cris/kernel/traps.c, and the reason we use this method of storing + * the file name and line number is that we do not want to affect the registers + * by calling printk() before causing the oops. + */ + +#define BUG_PREFIX 0x0D7F +#define BUG_MAGIC 0x00001234 + +struct bug_frame { + unsigned short prefix; + unsigned int magic; + unsigned short clear; + unsigned short movu; + unsigned short line; + unsigned short jump; + unsigned char *filename; +}; + +#if 0 +/* Unfortunately this version of the macro does not work due to a problem + * with the compiler (aka a bug) when compiling with -O2, which sometimes + * erroneously causes the second input to be stored in a register... + */ +#define BUG() \ + __asm__ __volatile__ ("clear.d [" __stringify(BUG_MAGIC) "]\n\t"\ + "movu.w %0,$r0\n\t" \ + "jump %1\n\t" \ + : : "i" (__LINE__), "i" (__FILE__)) +#else +/* This version will have to do for now, until the compiler is fixed. + * The drawbacks of this version are that the file name will appear multiple + * times in the .rodata section, and that __LINE__ and __FILE__ can probably + * not be used like this with newer versions of gcc. + */ +#define BUG() \ + __asm__ __volatile__ ("clear.d [" __stringify(BUG_MAGIC) "]\n\t"\ + "movu.w " __stringify(__LINE__) ",$r0\n\t"\ + "jump 0f\n\t" \ + ".section .rodata\n" \ + "0:\t.string \"" __FILE__ "\"\n\t" \ + ".previous") +#endif + +#else + +/* This just causes an oops. */ +#define BUG() (*(int *)0 = 0) + +#endif + +#define HAVE_ARCH_BUG +#endif + +#include + +#endif diff --git a/arch/cris/include/arch-v10/arch/byteorder.h b/arch/cris/include/arch-v10/arch/byteorder.h new file mode 100644 index 000000000000..255b646b7fa8 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/byteorder.h @@ -0,0 +1,26 @@ +#ifndef _CRIS_ARCH_BYTEORDER_H +#define _CRIS_ARCH_BYTEORDER_H + +#include +#include + +/* we just define these two (as we can do the swap in a single + * asm instruction in CRIS) and the arch-independent files will put + * them together into ntohl etc. + */ + +static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __asm__ ("swapwb %0" : "=r" (x) : "0" (x)); + + return(x); +} + +static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) +{ + __asm__ ("swapb %0" : "=r" (x) : "0" (x)); + + return(x); +} + +#endif diff --git a/arch/cris/include/arch-v10/arch/cache.h b/arch/cris/include/arch-v10/arch/cache.h new file mode 100644 index 000000000000..aea27184d2d2 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/cache.h @@ -0,0 +1,8 @@ +#ifndef _ASM_ARCH_CACHE_H +#define _ASM_ARCH_CACHE_H + +/* Etrax 100LX have 32-byte cache-lines. */ +#define L1_CACHE_BYTES 32 +#define L1_CACHE_SHIFT 5 + +#endif /* _ASM_ARCH_CACHE_H */ diff --git a/arch/cris/include/arch-v10/arch/checksum.h b/arch/cris/include/arch-v10/arch/checksum.h new file mode 100644 index 000000000000..b8000c5d7fe1 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/checksum.h @@ -0,0 +1,29 @@ +#ifndef _CRIS_ARCH_CHECKSUM_H +#define _CRIS_ARCH_CHECKSUM_H + +/* Checksum some values used in TCP/UDP headers. + * + * The gain by doing this in asm is that C will not generate carry-additions + * for the 32-bit components of the checksum, so otherwise we would have had + * to split all of those into 16-bit components, then add. + */ + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + __wsum res; + __asm__ ("add.d %2, %0\n\t" + "ax\n\t" + "add.d %3, %0\n\t" + "ax\n\t" + "add.d %4, %0\n\t" + "ax\n\t" + "addq 0, %0\n" + : "=r" (res) + : "0" (sum), "r" (daddr), "r" (saddr), "r" ((len + proto) << 8)); + + return res; +} + +#endif diff --git a/arch/cris/include/arch-v10/arch/delay.h b/arch/cris/include/arch-v10/arch/delay.h new file mode 100644 index 000000000000..39481f6e0c30 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/delay.h @@ -0,0 +1,20 @@ +#ifndef _CRIS_ARCH_DELAY_H +#define _CRIS_ARCH_DELAY_H + +static inline void __delay(int loops) +{ + __asm__ __volatile__ ( + "move.d %0,$r9\n\t" + "beq 2f\n\t" + "subq 1,$r9\n\t" + "1:\n\t" + "bne 1b\n\t" + "subq 1,$r9\n" + "2:" + : : "g" (loops) : "r9"); +} + +#endif /* defined(_CRIS_ARCH_DELAY_H) */ + + + diff --git a/arch/cris/include/arch-v10/arch/dma.h b/arch/cris/include/arch-v10/arch/dma.h new file mode 100644 index 000000000000..ecb9dba6fa4f --- /dev/null +++ b/arch/cris/include/arch-v10/arch/dma.h @@ -0,0 +1,74 @@ +/* Defines for using and allocating dma channels. */ + +#ifndef _ASM_ARCH_DMA_H +#define _ASM_ARCH_DMA_H + +#define MAX_DMA_CHANNELS 10 + +/* dma0 and dma1 used for network (ethernet) */ +#define NETWORK_TX_DMA_NBR 0 +#define NETWORK_RX_DMA_NBR 1 + +/* dma2 and dma3 shared by par0, scsi0, ser2 and ata */ +#define PAR0_TX_DMA_NBR 2 +#define PAR0_RX_DMA_NBR 3 +#define SCSI0_TX_DMA_NBR 2 +#define SCSI0_RX_DMA_NBR 3 +#define SER2_TX_DMA_NBR 2 +#define SER2_RX_DMA_NBR 3 +#define ATA_TX_DMA_NBR 2 +#define ATA_RX_DMA_NBR 3 + +/* dma4 and dma5 shared by par1, scsi1, ser3 and extdma0 */ +#define PAR1_TX_DMA_NBR 4 +#define PAR1_RX_DMA_NBR 5 +#define SCSI1_TX_DMA_NBR 4 +#define SCSI1_RX_DMA_NBR 5 +#define SER3_TX_DMA_NBR 4 +#define SER3_RX_DMA_NBR 5 +#define EXTDMA0_TX_DMA_NBR 4 +#define EXTDMA0_RX_DMA_NBR 5 + +/* dma6 and dma7 shared by ser0, extdma1 and mem2mem */ +#define SER0_TX_DMA_NBR 6 +#define SER0_RX_DMA_NBR 7 +#define EXTDMA1_TX_DMA_NBR 6 +#define EXTDMA1_RX_DMA_NBR 7 +#define MEM2MEM_TX_DMA_NBR 6 +#define MEM2MEM_RX_DMA_NBR 7 + +/* dma8 and dma9 shared by ser1 and usb */ +#define SER1_TX_DMA_NBR 8 +#define SER1_RX_DMA_NBR 9 +#define USB_TX_DMA_NBR 8 +#define USB_RX_DMA_NBR 9 + +#endif + +enum dma_owner +{ + dma_eth, + dma_ser0, + dma_ser1, /* Async and sync */ + dma_ser2, + dma_ser3, /* Async and sync */ + dma_ata, + dma_par0, + dma_par1, + dma_ext0, + dma_ext1, + dma_int6, + dma_int7, + dma_usb, + dma_scsi0, + dma_scsi1 +}; + +/* Masks used by cris_request_dma options: */ +#define DMA_VERBOSE_ON_ERROR (1<<0) +#define DMA_PANIC_ON_ERROR ((1<<1)|DMA_VERBOSE_ON_ERROR) + +int cris_request_dma(unsigned int dmanr, const char * device_id, + unsigned options, enum dma_owner owner); + +void cris_free_dma(unsigned int dmanr, const char * device_id); diff --git a/arch/cris/include/arch-v10/arch/elf.h b/arch/cris/include/arch-v10/arch/elf.h new file mode 100644 index 000000000000..1c38ee728b17 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/elf.h @@ -0,0 +1,81 @@ +#ifndef __ASMCRIS_ARCH_ELF_H +#define __ASMCRIS_ARCH_ELF_H + +#define ELF_MACH EF_CRIS_VARIANT_ANY_V0_V10 + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) \ + ((x)->e_machine == EM_CRIS \ + && ((((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_ANY_V0_V10 \ + || (((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_COMMON_V10_V32)))) + +/* + * ELF register definitions.. + */ + +#include + +/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program + starts (a register; assume first param register for CRIS) + contains a pointer to a function which might be + registered using `atexit'. This provides a mean for the + dynamic linker to call DT_FINI functions for shared libraries + that have been loaded before the code runs. + + A value of 0 tells we have no such handler. */ + +/* Explicitly set registers to 0 to increase determinism. */ +#define ELF_PLAT_INIT(_r, load_addr) do { \ + (_r)->r13 = 0; (_r)->r12 = 0; (_r)->r11 = 0; (_r)->r10 = 0; \ + (_r)->r9 = 0; (_r)->r8 = 0; (_r)->r7 = 0; (_r)->r6 = 0; \ + (_r)->r5 = 0; (_r)->r4 = 0; (_r)->r3 = 0; (_r)->r2 = 0; \ + (_r)->r1 = 0; (_r)->r0 = 0; (_r)->mof = 0; (_r)->srp = 0; \ +} while (0) + +/* The additional layer below is because the stack pointer is missing in + the pt_regs struct, but needed in a core dump. pr_reg is a elf_gregset_t, + and should be filled in according to the layout of the user_regs_struct + struct; regs is a pt_regs struct. We dump all registers, though several are + obviously unnecessary. That way there's less need for intelligence at + the receiving end (i.e. gdb). */ +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ + pr_reg[0] = regs->r0; \ + pr_reg[1] = regs->r1; \ + pr_reg[2] = regs->r2; \ + pr_reg[3] = regs->r3; \ + pr_reg[4] = regs->r4; \ + pr_reg[5] = regs->r5; \ + pr_reg[6] = regs->r6; \ + pr_reg[7] = regs->r7; \ + pr_reg[8] = regs->r8; \ + pr_reg[9] = regs->r9; \ + pr_reg[10] = regs->r10; \ + pr_reg[11] = regs->r11; \ + pr_reg[12] = regs->r12; \ + pr_reg[13] = regs->r13; \ + pr_reg[14] = rdusp(); /* sp */ \ + pr_reg[15] = regs->irp; /* pc */ \ + pr_reg[16] = 0; /* p0 */ \ + pr_reg[17] = rdvr(); /* vr */ \ + pr_reg[18] = 0; /* p2 */ \ + pr_reg[19] = 0; /* p3 */ \ + pr_reg[20] = 0; /* p4 */ \ + pr_reg[21] = (regs->dccr & 0xffff); /* ccr */ \ + pr_reg[22] = 0; /* p6 */ \ + pr_reg[23] = regs->mof; /* mof */ \ + pr_reg[24] = 0; /* p8 */ \ + pr_reg[25] = 0; /* ibr */ \ + pr_reg[26] = 0; /* irp */ \ + pr_reg[27] = regs->srp; /* srp */ \ + pr_reg[28] = 0; /* bar */ \ + pr_reg[29] = regs->dccr; /* dccr */ \ + pr_reg[30] = 0; /* brp */ \ + pr_reg[31] = rdusp(); /* usp */ \ + pr_reg[32] = 0; /* csrinstr */ \ + pr_reg[33] = 0; /* csraddr */ \ + pr_reg[34] = 0; /* csrdata */ + + +#endif diff --git a/arch/cris/include/arch-v10/arch/io.h b/arch/cris/include/arch-v10/arch/io.h new file mode 100644 index 000000000000..f627ad0b8a3d --- /dev/null +++ b/arch/cris/include/arch-v10/arch/io.h @@ -0,0 +1,199 @@ +#ifndef _ASM_ARCH_CRIS_IO_H +#define _ASM_ARCH_CRIS_IO_H + +#include + +/* Etrax shadow registers - which live in arch/cris/kernel/shadows.c */ + +extern unsigned long gen_config_ii_shadow; +extern unsigned long port_g_data_shadow; +extern unsigned char port_pa_dir_shadow; +extern unsigned char port_pa_data_shadow; +extern unsigned char port_pb_i2c_shadow; +extern unsigned char port_pb_config_shadow; +extern unsigned char port_pb_dir_shadow; +extern unsigned char port_pb_data_shadow; +extern unsigned long r_timer_ctrl_shadow; + +extern unsigned long port_cse1_shadow; +extern unsigned long port_csp0_shadow; +extern unsigned long port_csp4_shadow; + +extern volatile unsigned long *port_cse1_addr; +extern volatile unsigned long *port_csp0_addr; +extern volatile unsigned long *port_csp4_addr; + +/* macro for setting regs through a shadow - + * r = register name (like R_PORT_PA_DATA) + * s = shadow name (like port_pa_data_shadow) + * b = bit number + * v = value (0 or 1) + */ + +#define REG_SHADOW_SET(r,s,b,v) *r = s = (s & ~(1 << (b))) | ((v) << (b)) + +/* The LED's on various Etrax-based products are set differently. */ + +#if defined(CONFIG_ETRAX_NO_LEDS) || defined(CONFIG_SVINTO_SIM) +#undef CONFIG_ETRAX_PA_LEDS +#undef CONFIG_ETRAX_PB_LEDS +#undef CONFIG_ETRAX_CSP0_LEDS +#define CRIS_LED_NETWORK_SET_G(x) +#define CRIS_LED_NETWORK_SET_R(x) +#define CRIS_LED_ACTIVE_SET_G(x) +#define CRIS_LED_ACTIVE_SET_R(x) +#define CRIS_LED_DISK_WRITE(x) +#define CRIS_LED_DISK_READ(x) +#endif + +#if !defined(CONFIG_ETRAX_CSP0_LEDS) +#define CRIS_LED_BIT_SET(x) +#define CRIS_LED_BIT_CLR(x) +#endif + +#define CRIS_LED_OFF 0x00 +#define CRIS_LED_GREEN 0x01 +#define CRIS_LED_RED 0x02 +#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED) + +#if defined(CONFIG_ETRAX_NO_LEDS) +#define CRIS_LED_NETWORK_SET(x) +#else +#if CONFIG_ETRAX_LED1G == CONFIG_ETRAX_LED1R +#define CRIS_LED_NETWORK_SET(x) \ + do { \ + CRIS_LED_NETWORK_SET_G((x) & CRIS_LED_GREEN); \ + } while (0) +#else +#define CRIS_LED_NETWORK_SET(x) \ + do { \ + CRIS_LED_NETWORK_SET_G((x) & CRIS_LED_GREEN); \ + CRIS_LED_NETWORK_SET_R((x) & CRIS_LED_RED); \ + } while (0) +#endif +#if CONFIG_ETRAX_LED2G == CONFIG_ETRAX_LED2R +#define CRIS_LED_ACTIVE_SET(x) \ + do { \ + CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ + } while (0) +#else +#define CRIS_LED_ACTIVE_SET(x) \ + do { \ + CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ + CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \ + } while (0) +#endif +#endif + +#ifdef CONFIG_ETRAX_PA_LEDS +#define CRIS_LED_NETWORK_SET_G(x) \ + REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED1G, !(x)) +#define CRIS_LED_NETWORK_SET_R(x) \ + REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED1R, !(x)) +#define CRIS_LED_ACTIVE_SET_G(x) \ + REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED2G, !(x)) +#define CRIS_LED_ACTIVE_SET_R(x) \ + REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED2R, !(x)) +#define CRIS_LED_DISK_WRITE(x) \ + do{\ + REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3G, !(x));\ + REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3R, !(x));\ + }while(0) +#define CRIS_LED_DISK_READ(x) \ + REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, \ + CONFIG_ETRAX_LED3G, !(x)) +#endif + +#ifdef CONFIG_ETRAX_PB_LEDS +#define CRIS_LED_NETWORK_SET_G(x) \ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED1G, !(x)) +#define CRIS_LED_NETWORK_SET_R(x) \ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED1R, !(x)) +#define CRIS_LED_ACTIVE_SET_G(x) \ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED2G, !(x)) +#define CRIS_LED_ACTIVE_SET_R(x) \ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED2R, !(x)) +#define CRIS_LED_DISK_WRITE(x) \ + do{\ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3G, !(x));\ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3R, !(x));\ + }while(0) +#define CRIS_LED_DISK_READ(x) \ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, \ + CONFIG_ETRAX_LED3G, !(x)) +#endif + +#ifdef CONFIG_ETRAX_CSP0_LEDS +#define CONFIGURABLE_LEDS\ + ((1 << CONFIG_ETRAX_LED1G ) | (1 << CONFIG_ETRAX_LED1R ) |\ + (1 << CONFIG_ETRAX_LED2G ) | (1 << CONFIG_ETRAX_LED2R ) |\ + (1 << CONFIG_ETRAX_LED3G ) | (1 << CONFIG_ETRAX_LED3R ) |\ + (1 << CONFIG_ETRAX_LED4G ) | (1 << CONFIG_ETRAX_LED4R ) |\ + (1 << CONFIG_ETRAX_LED5G ) | (1 << CONFIG_ETRAX_LED5R ) |\ + (1 << CONFIG_ETRAX_LED6G ) | (1 << CONFIG_ETRAX_LED6R ) |\ + (1 << CONFIG_ETRAX_LED7G ) | (1 << CONFIG_ETRAX_LED7R ) |\ + (1 << CONFIG_ETRAX_LED8Y ) | (1 << CONFIG_ETRAX_LED9Y ) |\ + (1 << CONFIG_ETRAX_LED10Y ) |(1 << CONFIG_ETRAX_LED11Y )|\ + (1 << CONFIG_ETRAX_LED12R )) + +#define CRIS_LED_NETWORK_SET_G(x) \ + REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED1G, !(x)) +#define CRIS_LED_NETWORK_SET_R(x) \ + REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED1R, !(x)) +#define CRIS_LED_ACTIVE_SET_G(x) \ + REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED2G, !(x)) +#define CRIS_LED_ACTIVE_SET_R(x) \ + REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED2R, !(x)) +#define CRIS_LED_DISK_WRITE(x) \ + do{\ + REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3G, !(x));\ + REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3R, !(x));\ + }while(0) +#define CRIS_LED_DISK_READ(x) \ + REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3G, !(x)) +#define CRIS_LED_BIT_SET(x)\ + do{\ + if((( 1 << x) & CONFIGURABLE_LEDS) != 0)\ + REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, x, 1);\ + }while(0) +#define CRIS_LED_BIT_CLR(x)\ + do{\ + if((( 1 << x) & CONFIGURABLE_LEDS) != 0)\ + REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, x, 0);\ + }while(0) +#endif + +# +#ifdef CONFIG_ETRAX_SOFT_SHUTDOWN +#define SOFT_SHUTDOWN() \ + REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_SHUTDOWN_BIT, 1) +#else +#define SOFT_SHUTDOWN() +#endif + +/* Console I/O for simulated etrax100. Use #ifdef so erroneous + use will be evident. */ +#ifdef CONFIG_SVINTO_SIM + /* Let's use the ucsim interface since it lets us do write(2, ...) */ +#define SIMCOUT(s,len) \ + asm ("moveq 4,$r9 \n\t" \ + "moveq 2,$r10 \n\t" \ + "move.d %0,$r11 \n\t" \ + "move.d %1,$r12 \n\t" \ + "push $irp \n\t" \ + "move 0f,$irp \n\t" \ + "jump -6809 \n" \ + "0: \n\t" \ + "pop $irp" \ + : : "rm" (s), "rm" (len) : "r9","r10","r11","r12","memory") +#define TRACE_ON() __extension__ \ + ({ int _Foofoo; __asm__ volatile ("bmod [%0],%0" : "=r" (_Foofoo) : "0" \ + (255)); _Foofoo; }) + +#define TRACE_OFF() do { __asm__ volatile ("bmod [%0],%0" :: "r" (254)); } while (0) +#define SIM_END() do { __asm__ volatile ("bmod [%0],%0" :: "r" (28)); } while (0) +#define CRIS_CYCLES() __extension__ \ + ({ unsigned long c; asm ("bmod [%1],%0" : "=r" (c) : "r" (27)); c;}) +#endif /* ! defined CONFIG_SVINTO_SIM */ + +#endif diff --git a/arch/cris/include/arch-v10/arch/io_interface_mux.h b/arch/cris/include/arch-v10/arch/io_interface_mux.h new file mode 100644 index 000000000000..d92500080883 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/io_interface_mux.h @@ -0,0 +1,75 @@ +/* IO interface mux allocator for ETRAX100LX. + * Copyright 2004, Axis Communications AB + * $Id: io_interface_mux.h,v 1.1 2004/12/13 12:21:53 starvik Exp $ + */ + + +#ifndef _IO_INTERFACE_MUX_H +#define _IO_INTERFACE_MUX_H + + +/* C.f. ETRAX100LX Designer's Reference 20.9 */ + +/* The order in enum must match the order of interfaces[] in + * io_interface_mux.c */ +enum cris_io_interface { + /* Begin Non-multiplexed interfaces */ + if_eth = 0, + if_serial_0, + /* End Non-multiplexed interfaces */ + if_serial_1, + if_serial_2, + if_serial_3, + if_sync_serial_1, + if_sync_serial_3, + if_shared_ram, + if_shared_ram_w, + if_par_0, + if_par_1, + if_par_w, + if_scsi8_0, + if_scsi8_1, + if_scsi_w, + if_ata, + if_csp, + if_i2c, + if_usb_1, + if_usb_2, + /* GPIO pins */ + if_gpio_grp_a, + if_gpio_grp_b, + if_gpio_grp_c, + if_gpio_grp_d, + if_gpio_grp_e, + if_gpio_grp_f, + if_max_interfaces, + if_unclaimed +}; + +int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id); + +void cris_free_io_interface(enum cris_io_interface ioif); + +/* port can be 'a', 'b' or 'g' */ +int cris_io_interface_allocate_pins(const enum cris_io_interface ioif, + const char port, + const unsigned start_bit, + const unsigned stop_bit); + +/* port can be 'a', 'b' or 'g' */ +int cris_io_interface_free_pins(const enum cris_io_interface ioif, + const char port, + const unsigned start_bit, + const unsigned stop_bit); + +int cris_io_interface_register_watcher(void (*notify)(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available)); + +void cris_io_interface_delete_watcher(void (*notify)(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available)); + +#endif /* _IO_INTERFACE_MUX_H */ diff --git a/arch/cris/include/arch-v10/arch/irq.h b/arch/cris/include/arch-v10/arch/irq.h new file mode 100644 index 000000000000..6248004eca1c --- /dev/null +++ b/arch/cris/include/arch-v10/arch/irq.h @@ -0,0 +1,160 @@ +/* + * Interrupt handling assembler and defines for Linux/CRISv10 + */ + +#ifndef _ASM_ARCH_IRQ_H +#define _ASM_ARCH_IRQ_H + +#include + +#define NR_IRQS 32 + +/* The first vector number used for IRQs in v10 is really 0x20 */ +/* but all the code and constants are offseted to make 0 the first */ +#define FIRST_IRQ 0 + +#define SOME_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, some) /* 0 ? */ +#define NMI_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, nmi) /* 1 */ +#define TIMER0_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, timer0) /* 2 */ +#define TIMER1_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, timer1) /* 3 */ +/* mio, ata, par0, scsi0 on 4 */ +/* par1, scsi1 on 5 */ +#define NETWORK_STATUS_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, network) /* 6 */ + +#define SERIAL_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, serial) /* 8 */ +#define PA_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, pa) /* 11 */ +/* extdma0 and extdma1 is at irq 12 and 13 and/or same as dma5 and dma6 ? */ +#define EXTDMA0_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, ext_dma0) +#define EXTDMA1_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, ext_dma1) + +/* dma0-9 is irq 16..25 */ +/* 16,17: network */ +#define DMA0_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma0) +#define DMA1_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma1) +#define NETWORK_DMA_TX_IRQ_NBR DMA0_TX_IRQ_NBR +#define NETWORK_DMA_RX_IRQ_NBR DMA1_RX_IRQ_NBR + +/* 18,19: dma2 and dma3 shared by par0, scsi0, ser2 and ata */ +#define DMA2_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma2) +#define DMA3_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma3) +#define SER2_DMA_TX_IRQ_NBR DMA2_TX_IRQ_NBR +#define SER2_DMA_RX_IRQ_NBR DMA3_RX_IRQ_NBR + +/* 20,21: dma4 and dma5 shared by par1, scsi1, ser3 and extdma0 */ +#define DMA4_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma4) +#define DMA5_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma5) +#define SER3_DMA_TX_IRQ_NBR DMA4_TX_IRQ_NBR +#define SER3_DMA_RX_IRQ_NBR DMA5_RX_IRQ_NBR + +/* 22,23: dma6 and dma7 shared by ser0, extdma1 and mem2mem */ +#define DMA6_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma6) +#define DMA7_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma7) +#define SER0_DMA_TX_IRQ_NBR DMA6_TX_IRQ_NBR +#define SER0_DMA_RX_IRQ_NBR DMA7_RX_IRQ_NBR +#define MEM2MEM_DMA_TX_IRQ_NBR DMA6_TX_IRQ_NBR +#define MEM2MEM_DMA_RX_IRQ_NBR DMA7_RX_IRQ_NBR + +/* 24,25: dma8 and dma9 shared by ser1 and usb */ +#define DMA8_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma8) +#define DMA9_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma9) +#define SER1_DMA_TX_IRQ_NBR DMA8_TX_IRQ_NBR +#define SER1_DMA_RX_IRQ_NBR DMA9_RX_IRQ_NBR +#define USB_DMA_TX_IRQ_NBR DMA8_TX_IRQ_NBR +#define USB_DMA_RX_IRQ_NBR DMA9_RX_IRQ_NBR + +/* usb: controller at irq 31 + uses DMA8 and DMA9 */ +#define USB_HC_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, usb) + +/* our fine, global, etrax irq vector! the pointer lives in the head.S file. */ + +typedef void (*irqvectptr)(void); + +struct etrax_interrupt_vector { + irqvectptr v[256]; +}; + +extern struct etrax_interrupt_vector *etrax_irv; +void set_int_vector(int n, irqvectptr addr); +void set_break_vector(int n, irqvectptr addr); + +#define __STR(x) #x +#define STR(x) __STR(x) + +/* SAVE_ALL saves registers so they match pt_regs */ + +#define SAVE_ALL \ + "move $irp,[$sp=$sp-16]\n\t" /* push instruction pointer and fake SBFS struct */ \ + "push $srp\n\t" /* push subroutine return pointer */ \ + "push $dccr\n\t" /* push condition codes */ \ + "push $mof\n\t" /* push multiply overflow reg */ \ + "di\n\t" /* need to disable irq's at this point */\ + "subq 14*4,$sp\n\t" /* make room for r0-r13 */ \ + "movem $r13,[$sp]\n\t" /* push the r0-r13 registers */ \ + "push $r10\n\t" /* push orig_r10 */ \ + "clear.d [$sp=$sp-4]\n\t" /* frametype - this is a normal stackframe */ + + /* BLOCK_IRQ and UNBLOCK_IRQ do the same as mask_irq and unmask_irq */ + +#define BLOCK_IRQ(mask,nr) \ + "move.d " #mask ",$r0\n\t" \ + "move.d $r0,[0xb00000d8]\n\t" + +#define UNBLOCK_IRQ(mask) \ + "move.d " #mask ",$r0\n\t" \ + "move.d $r0,[0xb00000dc]\n\t" + +#define IRQ_NAME2(nr) nr##_interrupt(void) +#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) +#define sIRQ_NAME(nr) IRQ_NAME2(sIRQ##nr) +#define BAD_IRQ_NAME(nr) IRQ_NAME2(bad_IRQ##nr) + + /* the asm IRQ handler makes sure the causing IRQ is blocked, then it calls + * do_IRQ (with irq disabled still). after that it unblocks and jumps to + * ret_from_intr (entry.S) + * + * The reason the IRQ is blocked is to allow an sti() before the handler which + * will acknowledge the interrupt is run. + */ + +#define BUILD_IRQ(nr,mask) \ +void IRQ_NAME(nr); \ +__asm__ ( \ + ".text\n\t" \ + "IRQ" #nr "_interrupt:\n\t" \ + SAVE_ALL \ + BLOCK_IRQ(mask,nr) /* this must be done to prevent irq loops when we ei later */ \ + "moveq "#nr",$r10\n\t" \ + "move.d $sp,$r11\n\t" \ + "jsr do_IRQ\n\t" /* irq.c, r10 and r11 are arguments */ \ + UNBLOCK_IRQ(mask) \ + "moveq 0,$r9\n\t" /* make ret_from_intr realise we came from an irq */ \ + "jump ret_from_intr\n\t"); + +/* This is subtle. The timer interrupt is crucial and it should not be disabled for + * too long. However, if it had been a normal interrupt as per BUILD_IRQ, it would + * have been BLOCK'ed, and then softirq's are run before we return here to UNBLOCK. + * If the softirq's take too much time to run, the timer irq won't run and the + * watchdog will kill us. + * + * Furthermore, if a lot of other irq's occur before we return here, the multiple_irq + * handler is run and it prioritizes the timer interrupt. However if we had BLOCK'ed + * it here, we would not get the multiple_irq at all. + * + * The non-blocking here is based on the knowledge that the timer interrupt is + * registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not + * be an sti() before the timer irq handler is run to acknowledge the interrupt. + */ + +#define BUILD_TIMER_IRQ(nr,mask) \ +void IRQ_NAME(nr); \ +__asm__ ( \ + ".text\n\t" \ + "IRQ" #nr "_interrupt:\n\t" \ + SAVE_ALL \ + "moveq "#nr",$r10\n\t" \ + "move.d $sp,$r11\n\t" \ + "jsr do_IRQ\n\t" /* irq.c, r10 and r11 are arguments */ \ + "moveq 0,$r9\n\t" /* make ret_from_intr realise we came from an irq */ \ + "jump ret_from_intr\n\t"); + +#endif diff --git a/arch/cris/include/arch-v10/arch/memmap.h b/arch/cris/include/arch-v10/arch/memmap.h new file mode 100644 index 000000000000..13f3b971407f --- /dev/null +++ b/arch/cris/include/arch-v10/arch/memmap.h @@ -0,0 +1,22 @@ +#ifndef _ASM_ARCH_MEMMAP_H +#define _ASM_ARCH_MEMMAP_H + +#define MEM_CSE0_START (0x00000000) +#define MEM_CSE0_SIZE (0x04000000) +#define MEM_CSE1_START (0x04000000) +#define MEM_CSE1_SIZE (0x04000000) +#define MEM_CSR0_START (0x08000000) +#define MEM_CSR1_START (0x0c000000) +#define MEM_CSP0_START (0x10000000) +#define MEM_CSP1_START (0x14000000) +#define MEM_CSP2_START (0x18000000) +#define MEM_CSP3_START (0x1c000000) +#define MEM_CSP4_START (0x20000000) +#define MEM_CSP5_START (0x24000000) +#define MEM_CSP6_START (0x28000000) +#define MEM_CSP7_START (0x2c000000) +#define MEM_DRAM_START (0x40000000) + +#define MEM_NON_CACHEABLE (0x80000000) + +#endif diff --git a/arch/cris/include/arch-v10/arch/mmu.h b/arch/cris/include/arch-v10/arch/mmu.h new file mode 100644 index 000000000000..df84f1716e6b --- /dev/null +++ b/arch/cris/include/arch-v10/arch/mmu.h @@ -0,0 +1,109 @@ +/* + * CRIS MMU constants and PTE layout + */ + +#ifndef _CRIS_ARCH_MMU_H +#define _CRIS_ARCH_MMU_H + +/* type used in struct mm to couple an MMU context to an active mm */ + +typedef struct +{ + unsigned int page_id; +} mm_context_t; + +/* kernel memory segments */ + +#define KSEG_F 0xf0000000UL +#define KSEG_E 0xe0000000UL +#define KSEG_D 0xd0000000UL +#define KSEG_C 0xc0000000UL +#define KSEG_B 0xb0000000UL +#define KSEG_A 0xa0000000UL +#define KSEG_9 0x90000000UL +#define KSEG_8 0x80000000UL +#define KSEG_7 0x70000000UL +#define KSEG_6 0x60000000UL +#define KSEG_5 0x50000000UL +#define KSEG_4 0x40000000UL +#define KSEG_3 0x30000000UL +#define KSEG_2 0x20000000UL +#define KSEG_1 0x10000000UL +#define KSEG_0 0x00000000UL + +/* CRIS PTE bits (see R_TLB_LO in the register description) + * + * Bit: 31-13 12-------4 3 2 1 0 + * ________________________________________________ + * | pfn | reserved | global | valid | kernel | we | + * |_____|__________|________|_______|________|_____| + * + * (pfn = physical frame number) + */ + +/* Real HW-based PTE bits. We use some synonym names so that + * things become less confusing in combination with the SW-based + * bits further below. + * + */ + +#define _PAGE_WE (1<<0) /* page is write-enabled */ +#define _PAGE_SILENT_WRITE (1<<0) /* synonym */ +#define _PAGE_KERNEL (1<<1) /* page is kernel only */ +#define _PAGE_VALID (1<<2) /* page is valid */ +#define _PAGE_SILENT_READ (1<<2) /* synonym */ +#define _PAGE_GLOBAL (1<<3) /* global page - context is ignored */ + +/* Bits the HW doesn't care about but the kernel uses them in SW */ + +#define _PAGE_PRESENT (1<<4) /* page present in memory */ +#define _PAGE_FILE (1<<5) /* set: pagecache, unset: swap (when !PRESENT) */ +#define _PAGE_ACCESSED (1<<5) /* simulated in software using valid bit */ +#define _PAGE_MODIFIED (1<<6) /* simulated in software using we bit */ +#define _PAGE_READ (1<<7) /* read-enabled */ +#define _PAGE_WRITE (1<<8) /* write-enabled */ + +/* Define some higher level generic page attributes. */ + +#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED) +#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) + +#define _PAGE_TABLE (_PAGE_PRESENT | __READABLE | __WRITEABLE) +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED) + +#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_WRITE | \ + _PAGE_ACCESSED) +#define PAGE_COPY __pgprot(_PAGE_PRESENT | __READABLE) // | _PAGE_COW +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | __READABLE) +#define PAGE_KERNEL __pgprot(_PAGE_GLOBAL | _PAGE_KERNEL | \ + _PAGE_PRESENT | __READABLE | __WRITEABLE) +#define _KERNPG_TABLE (_PAGE_TABLE | _PAGE_KERNEL) + +/* + * CRIS can't do page protection for execute, and considers read the same. + * Also, write permissions imply read permissions. This is the closest we can + * get.. + */ + +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY +#define __P101 PAGE_READONLY +#define __P110 PAGE_COPY +#define __P111 PAGE_COPY + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY +#define __S101 PAGE_READONLY +#define __S110 PAGE_SHARED +#define __S111 PAGE_SHARED + +#define PTE_FILE_MAX_BITS 26 + +#endif diff --git a/arch/cris/include/arch-v10/arch/offset.h b/arch/cris/include/arch-v10/arch/offset.h new file mode 100644 index 000000000000..675b51d85639 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/offset.h @@ -0,0 +1,33 @@ +#ifndef __ASM_OFFSETS_H__ +#define __ASM_OFFSETS_H__ +/* + * DO NOT MODIFY. + * + * This file was generated by arch/cris/Makefile + * + */ + +#define PT_orig_r10 4 /* offsetof(struct pt_regs, orig_r10) */ +#define PT_r13 8 /* offsetof(struct pt_regs, r13) */ +#define PT_r12 12 /* offsetof(struct pt_regs, r12) */ +#define PT_r11 16 /* offsetof(struct pt_regs, r11) */ +#define PT_r10 20 /* offsetof(struct pt_regs, r10) */ +#define PT_r9 24 /* offsetof(struct pt_regs, r9) */ +#define PT_mof 64 /* offsetof(struct pt_regs, mof) */ +#define PT_dccr 68 /* offsetof(struct pt_regs, dccr) */ +#define PT_srp 72 /* offsetof(struct pt_regs, srp) */ + +#define TI_task 0 /* offsetof(struct thread_info, task) */ +#define TI_flags 8 /* offsetof(struct thread_info, flags) */ +#define TI_preempt_count 16 /* offsetof(struct thread_info, preempt_count) */ + +#define THREAD_ksp 0 /* offsetof(struct thread_struct, ksp) */ +#define THREAD_usp 4 /* offsetof(struct thread_struct, usp) */ +#define THREAD_dccr 8 /* offsetof(struct thread_struct, dccr) */ + +#define TASK_pid 141 /* offsetof(struct task_struct, pid) */ + +#define LCLONE_VM 256 /* CLONE_VM */ +#define LCLONE_UNTRACED 8388608 /* CLONE_UNTRACED */ + +#endif diff --git a/arch/cris/include/arch-v10/arch/page.h b/arch/cris/include/arch-v10/arch/page.h new file mode 100644 index 000000000000..ffafc99c3472 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/page.h @@ -0,0 +1,30 @@ +#ifndef _CRIS_ARCH_PAGE_H +#define _CRIS_ARCH_PAGE_H + + +#ifdef __KERNEL__ + +/* This handles the memory map.. */ +#ifdef CONFIG_CRIS_LOW_MAP +#define PAGE_OFFSET KSEG_6 /* kseg_6 is mapped to physical ram */ +#else +#define PAGE_OFFSET KSEG_C /* kseg_c is mapped to physical ram */ +#endif + +/* macros to convert between really physical and virtual addresses + * by stripping a selected bit, we can convert between KSEG_x and + * 0x40000000 where the DRAM really resides + */ + +#ifdef CONFIG_CRIS_LOW_MAP +/* we have DRAM virtually at 0x6 */ +#define __pa(x) ((unsigned long)(x) & 0xdfffffff) +#define __va(x) ((void *)((unsigned long)(x) | 0x20000000)) +#else +/* we have DRAM virtually at 0xc */ +#define __pa(x) ((unsigned long)(x) & 0x7fffffff) +#define __va(x) ((void *)((unsigned long)(x) | 0x80000000)) +#endif + +#endif +#endif diff --git a/arch/cris/include/arch-v10/arch/pgtable.h b/arch/cris/include/arch-v10/arch/pgtable.h new file mode 100644 index 000000000000..2a2576d1fc97 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/pgtable.h @@ -0,0 +1,17 @@ +#ifndef _CRIS_ARCH_PGTABLE_H +#define _CRIS_ARCH_PGTABLE_H + +/* + * Kernels own virtual memory area. + */ + +#ifdef CONFIG_CRIS_LOW_MAP +#define VMALLOC_START KSEG_7 +#define VMALLOC_END KSEG_8 +#else +#define VMALLOC_START KSEG_D +#define VMALLOC_END KSEG_E +#endif + +#endif + diff --git a/arch/cris/include/arch-v10/arch/processor.h b/arch/cris/include/arch-v10/arch/processor.h new file mode 100644 index 000000000000..cc692c7a0660 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/processor.h @@ -0,0 +1,70 @@ +#ifndef __ASM_CRIS_ARCH_PROCESSOR_H +#define __ASM_CRIS_ARCH_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({void *pc; __asm__ ("move.d $pc,%0" : "=rm" (pc)); pc; }) + +/* CRIS has no problems with write protection */ +#define wp_works_ok 1 + +/* CRIS thread_struct. this really has nothing to do with the processor itself, since + * CRIS does not do any hardware task-switching, but it's here for legacy reasons. + * The thread_struct here is used when task-switching using _resume defined in entry.S. + * The offsets here are hardcoded into _resume - if you change this struct, you need to + * change them as well!!! +*/ + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned long dccr; /* saved flag register */ +}; + +/* + * User space process size. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ + +#ifdef CONFIG_CRIS_LOW_MAP +#define TASK_SIZE (0x50000000UL) /* 1.25 GB */ +#else +#define TASK_SIZE (0xA0000000UL) /* 2.56 GB */ +#endif + +#define INIT_THREAD { \ + 0, 0, 0x20 } /* ccr = int enable, nothing else */ + +#define KSTK_EIP(tsk) \ +({ \ + unsigned long eip = 0; \ + unsigned long regs = (unsigned long)task_pt_regs(tsk); \ + if (regs > PAGE_SIZE && \ + virt_addr_valid(regs)) \ + eip = ((struct pt_regs *)regs)->irp; \ + eip; \ +}) + +/* give the thread a program location + * set user-mode (The 'U' flag (User mode flag) is CCR/DCCR bit 8) + * switch user-stackpointer + */ + +#define start_thread(regs, ip, usp) do { \ + set_fs(USER_DS); \ + regs->irp = ip; \ + regs->dccr |= 1 << U_DCCR_BITNR; \ + wrusp(usp); \ +} while(0) + +/* Called when handling a kernel bus fault fixup. + * + * After a fixup we do not want to return by restoring the CPU-state + * anymore, so switch frame-types (see ptrace.h) + */ +#define arch_fixup(regs) \ + regs->frametype = CRIS_FRAME_NORMAL; + +#endif diff --git a/arch/cris/include/arch-v10/arch/ptrace.h b/arch/cris/include/arch-v10/arch/ptrace.h new file mode 100644 index 000000000000..2f464eab3a51 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/ptrace.h @@ -0,0 +1,119 @@ +#ifndef _CRIS_ARCH_PTRACE_H +#define _CRIS_ARCH_PTRACE_H + +/* Frame types */ + +#define CRIS_FRAME_NORMAL 0 /* normal frame without SBFS stacking */ +#define CRIS_FRAME_BUSFAULT 1 /* frame stacked using SBFS, need RBF return + path */ + +/* Register numbers in the ptrace system call interface */ + +#define PT_FRAMETYPE 0 +#define PT_ORIG_R10 1 +#define PT_R13 2 +#define PT_R12 3 +#define PT_R11 4 +#define PT_R10 5 +#define PT_R9 6 +#define PT_R8 7 +#define PT_R7 8 +#define PT_R6 9 +#define PT_R5 10 +#define PT_R4 11 +#define PT_R3 12 +#define PT_R2 13 +#define PT_R1 14 +#define PT_R0 15 +#define PT_MOF 16 +#define PT_DCCR 17 +#define PT_SRP 18 +#define PT_IRP 19 /* This is actually the debugged process' PC */ +#define PT_CSRINSTR 20 /* CPU Status record remnants - + valid if frametype == busfault */ +#define PT_CSRADDR 21 +#define PT_CSRDATA 22 +#define PT_USP 23 /* special case - USP is not in the pt_regs */ +#define PT_MAX 23 + +/* Condition code bit numbers. The same numbers apply to CCR of course, + but we use DCCR everywhere else, so let's try and be consistent. */ +#define C_DCCR_BITNR 0 +#define V_DCCR_BITNR 1 +#define Z_DCCR_BITNR 2 +#define N_DCCR_BITNR 3 +#define X_DCCR_BITNR 4 +#define I_DCCR_BITNR 5 +#define B_DCCR_BITNR 6 +#define M_DCCR_BITNR 7 +#define U_DCCR_BITNR 8 +#define P_DCCR_BITNR 9 +#define F_DCCR_BITNR 10 + +/* pt_regs not only specifices the format in the user-struct during + * ptrace but is also the frame format used in the kernel prologue/epilogues + * themselves + */ + +struct pt_regs { + unsigned long frametype; /* type of stackframe */ + unsigned long orig_r10; + /* pushed by movem r13, [sp] in SAVE_ALL, movem pushes backwards */ + unsigned long r13; + unsigned long r12; + unsigned long r11; + unsigned long r10; + unsigned long r9; + unsigned long r8; + unsigned long r7; + unsigned long r6; + unsigned long r5; + unsigned long r4; + unsigned long r3; + unsigned long r2; + unsigned long r1; + unsigned long r0; + unsigned long mof; + unsigned long dccr; + unsigned long srp; + unsigned long irp; /* This is actually the debugged process' PC */ + unsigned long csrinstr; + unsigned long csraddr; + unsigned long csrdata; +}; + +/* switch_stack is the extra stuff pushed onto the stack in _resume (entry.S) + * when doing a context-switch. it is used (apart from in resume) when a new + * thread is made and we need to make _resume (which is starting it for the + * first time) realise what is going on. + * + * Actually, the use is very close to the thread struct (TSS) in that both the + * switch_stack and the TSS are used to keep thread stuff when switching in + * _resume. + */ + +struct switch_stack { + unsigned long r9; + unsigned long r8; + unsigned long r7; + unsigned long r6; + unsigned long r5; + unsigned long r4; + unsigned long r3; + unsigned long r2; + unsigned long r1; + unsigned long r0; + unsigned long return_ip; /* ip that _resume will return to */ +}; + +#ifdef __KERNEL__ + +/* bit 8 is user-mode flag */ +#define user_mode(regs) (((regs)->dccr & 0x100) != 0) +#define instruction_pointer(regs) ((regs)->irp) +#define profile_pc(regs) instruction_pointer(regs) +extern void show_regs(struct pt_regs *); + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/cris/include/arch-v10/arch/sv_addr.agh b/arch/cris/include/arch-v10/arch/sv_addr.agh new file mode 100644 index 000000000000..6ac3a7bc9760 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/sv_addr.agh @@ -0,0 +1,7306 @@ +/* +!* This file was automatically generated by /n/asic/bin/reg_macro_gen +!* from the file `/n/asic/projects/etrax_ng/doc/work/etrax_ng_regs.rd'. +!* Editing within this file is thus not recommended, +!* make the changes in `/n/asic/projects/etrax_ng/doc/work/etrax_ng_regs.rd' instead. +!*/ + + +/* +!* Bus interface configuration registers +!*/ + +#define R_WAITSTATES (IO_TYPECAST_UDWORD 0xb0000000) +#define R_WAITSTATES__pcs4_7_zw__BITNR 30 +#define R_WAITSTATES__pcs4_7_zw__WIDTH 2 +#define R_WAITSTATES__pcs4_7_ew__BITNR 28 +#define R_WAITSTATES__pcs4_7_ew__WIDTH 2 +#define R_WAITSTATES__pcs4_7_lw__BITNR 24 +#define R_WAITSTATES__pcs4_7_lw__WIDTH 4 +#define R_WAITSTATES__pcs0_3_zw__BITNR 22 +#define R_WAITSTATES__pcs0_3_zw__WIDTH 2 +#define R_WAITSTATES__pcs0_3_ew__BITNR 20 +#define R_WAITSTATES__pcs0_3_ew__WIDTH 2 +#define R_WAITSTATES__pcs0_3_lw__BITNR 16 +#define R_WAITSTATES__pcs0_3_lw__WIDTH 4 +#define R_WAITSTATES__sram_zw__BITNR 14 +#define R_WAITSTATES__sram_zw__WIDTH 2 +#define R_WAITSTATES__sram_ew__BITNR 12 +#define R_WAITSTATES__sram_ew__WIDTH 2 +#define R_WAITSTATES__sram_lw__BITNR 8 +#define R_WAITSTATES__sram_lw__WIDTH 4 +#define R_WAITSTATES__flash_zw__BITNR 6 +#define R_WAITSTATES__flash_zw__WIDTH 2 +#define R_WAITSTATES__flash_ew__BITNR 4 +#define R_WAITSTATES__flash_ew__WIDTH 2 +#define R_WAITSTATES__flash_lw__BITNR 0 +#define R_WAITSTATES__flash_lw__WIDTH 4 + +#define R_BUS_CONFIG (IO_TYPECAST_UDWORD 0xb0000004) +#define R_BUS_CONFIG__sram_type__BITNR 9 +#define R_BUS_CONFIG__sram_type__WIDTH 1 +#define R_BUS_CONFIG__sram_type__cwe 1 +#define R_BUS_CONFIG__sram_type__bwe 0 +#define R_BUS_CONFIG__dma_burst__BITNR 8 +#define R_BUS_CONFIG__dma_burst__WIDTH 1 +#define R_BUS_CONFIG__dma_burst__burst16 1 +#define R_BUS_CONFIG__dma_burst__burst32 0 +#define R_BUS_CONFIG__pcs4_7_wr__BITNR 7 +#define R_BUS_CONFIG__pcs4_7_wr__WIDTH 1 +#define R_BUS_CONFIG__pcs4_7_wr__ext 1 +#define R_BUS_CONFIG__pcs4_7_wr__norm 0 +#define R_BUS_CONFIG__pcs0_3_wr__BITNR 6 +#define R_BUS_CONFIG__pcs0_3_wr__WIDTH 1 +#define R_BUS_CONFIG__pcs0_3_wr__ext 1 +#define R_BUS_CONFIG__pcs0_3_wr__norm 0 +#define R_BUS_CONFIG__sram_wr__BITNR 5 +#define R_BUS_CONFIG__sram_wr__WIDTH 1 +#define R_BUS_CONFIG__sram_wr__ext 1 +#define R_BUS_CONFIG__sram_wr__norm 0 +#define R_BUS_CONFIG__flash_wr__BITNR 4 +#define R_BUS_CONFIG__flash_wr__WIDTH 1 +#define R_BUS_CONFIG__flash_wr__ext 1 +#define R_BUS_CONFIG__flash_wr__norm 0 +#define R_BUS_CONFIG__pcs4_7_bw__BITNR 3 +#define R_BUS_CONFIG__pcs4_7_bw__WIDTH 1 +#define R_BUS_CONFIG__pcs4_7_bw__bw32 1 +#define R_BUS_CONFIG__pcs4_7_bw__bw16 0 +#define R_BUS_CONFIG__pcs0_3_bw__BITNR 2 +#define R_BUS_CONFIG__pcs0_3_bw__WIDTH 1 +#define R_BUS_CONFIG__pcs0_3_bw__bw32 1 +#define R_BUS_CONFIG__pcs0_3_bw__bw16 0 +#define R_BUS_CONFIG__sram_bw__BITNR 1 +#define R_BUS_CONFIG__sram_bw__WIDTH 1 +#define R_BUS_CONFIG__sram_bw__bw32 1 +#define R_BUS_CONFIG__sram_bw__bw16 0 +#define R_BUS_CONFIG__flash_bw__BITNR 0 +#define R_BUS_CONFIG__flash_bw__WIDTH 1 +#define R_BUS_CONFIG__flash_bw__bw32 1 +#define R_BUS_CONFIG__flash_bw__bw16 0 + +#define R_BUS_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000004) +#define R_BUS_STATUS__pll_lock_tm__BITNR 5 +#define R_BUS_STATUS__pll_lock_tm__WIDTH 1 +#define R_BUS_STATUS__pll_lock_tm__expired 0 +#define R_BUS_STATUS__pll_lock_tm__counting 1 +#define R_BUS_STATUS__both_faults__BITNR 4 +#define R_BUS_STATUS__both_faults__WIDTH 1 +#define R_BUS_STATUS__both_faults__no 0 +#define R_BUS_STATUS__both_faults__yes 1 +#define R_BUS_STATUS__bsen___BITNR 3 +#define R_BUS_STATUS__bsen___WIDTH 1 +#define R_BUS_STATUS__bsen___enable 0 +#define R_BUS_STATUS__bsen___disable 1 +#define R_BUS_STATUS__boot__BITNR 1 +#define R_BUS_STATUS__boot__WIDTH 2 +#define R_BUS_STATUS__boot__uncached 0 +#define R_BUS_STATUS__boot__serial 1 +#define R_BUS_STATUS__boot__network 2 +#define R_BUS_STATUS__boot__parallel 3 +#define R_BUS_STATUS__flashw__BITNR 0 +#define R_BUS_STATUS__flashw__WIDTH 1 +#define R_BUS_STATUS__flashw__bw32 1 +#define R_BUS_STATUS__flashw__bw16 0 + +#define R_DRAM_TIMING (IO_TYPECAST_UDWORD 0xb0000008) +#define R_DRAM_TIMING__sdram__BITNR 31 +#define R_DRAM_TIMING__sdram__WIDTH 1 +#define R_DRAM_TIMING__sdram__enable 1 +#define R_DRAM_TIMING__sdram__disable 0 +#define R_DRAM_TIMING__ref__BITNR 14 +#define R_DRAM_TIMING__ref__WIDTH 2 +#define R_DRAM_TIMING__ref__e52us 0 +#define R_DRAM_TIMING__ref__e13us 1 +#define R_DRAM_TIMING__ref__e8700ns 2 +#define R_DRAM_TIMING__ref__disable 3 +#define R_DRAM_TIMING__rp__BITNR 12 +#define R_DRAM_TIMING__rp__WIDTH 2 +#define R_DRAM_TIMING__rs__BITNR 10 +#define R_DRAM_TIMING__rs__WIDTH 2 +#define R_DRAM_TIMING__rh__BITNR 8 +#define R_DRAM_TIMING__rh__WIDTH 2 +#define R_DRAM_TIMING__w__BITNR 7 +#define R_DRAM_TIMING__w__WIDTH 1 +#define R_DRAM_TIMING__w__norm 0 +#define R_DRAM_TIMING__w__ext 1 +#define R_DRAM_TIMING__c__BITNR 6 +#define R_DRAM_TIMING__c__WIDTH 1 +#define R_DRAM_TIMING__c__norm 0 +#define R_DRAM_TIMING__c__ext 1 +#define R_DRAM_TIMING__cz__BITNR 4 +#define R_DRAM_TIMING__cz__WIDTH 2 +#define R_DRAM_TIMING__cp__BITNR 2 +#define R_DRAM_TIMING__cp__WIDTH 2 +#define R_DRAM_TIMING__cw__BITNR 0 +#define R_DRAM_TIMING__cw__WIDTH 2 + +#define R_SDRAM_TIMING (IO_TYPECAST_UDWORD 0xb0000008) +#define R_SDRAM_TIMING__sdram__BITNR 31 +#define R_SDRAM_TIMING__sdram__WIDTH 1 +#define R_SDRAM_TIMING__sdram__enable 1 +#define R_SDRAM_TIMING__sdram__disable 0 +#define R_SDRAM_TIMING__mrs_data__BITNR 16 +#define R_SDRAM_TIMING__mrs_data__WIDTH 15 +#define R_SDRAM_TIMING__ref__BITNR 14 +#define R_SDRAM_TIMING__ref__WIDTH 2 +#define R_SDRAM_TIMING__ref__e52us 0 +#define R_SDRAM_TIMING__ref__e13us 1 +#define R_SDRAM_TIMING__ref__e6500ns 2 +#define R_SDRAM_TIMING__ref__disable 3 +#define R_SDRAM_TIMING__ddr__BITNR 13 +#define R_SDRAM_TIMING__ddr__WIDTH 1 +#define R_SDRAM_TIMING__ddr__on 1 +#define R_SDRAM_TIMING__ddr__off 0 +#define R_SDRAM_TIMING__clk100__BITNR 12 +#define R_SDRAM_TIMING__clk100__WIDTH 1 +#define R_SDRAM_TIMING__clk100__on 1 +#define R_SDRAM_TIMING__clk100__off 0 +#define R_SDRAM_TIMING__ps__BITNR 11 +#define R_SDRAM_TIMING__ps__WIDTH 1 +#define R_SDRAM_TIMING__ps__on 1 +#define R_SDRAM_TIMING__ps__off 0 +#define R_SDRAM_TIMING__cmd__BITNR 9 +#define R_SDRAM_TIMING__cmd__WIDTH 2 +#define R_SDRAM_TIMING__cmd__pre 3 +#define R_SDRAM_TIMING__cmd__ref 2 +#define R_SDRAM_TIMING__cmd__mrs 1 +#define R_SDRAM_TIMING__cmd__nop 0 +#define R_SDRAM_TIMING__pde__BITNR 8 +#define R_SDRAM_TIMING__pde__WIDTH 1 +#define R_SDRAM_TIMING__rc__BITNR 6 +#define R_SDRAM_TIMING__rc__WIDTH 2 +#define R_SDRAM_TIMING__rp__BITNR 4 +#define R_SDRAM_TIMING__rp__WIDTH 2 +#define R_SDRAM_TIMING__rcd__BITNR 2 +#define R_SDRAM_TIMING__rcd__WIDTH 2 +#define R_SDRAM_TIMING__cl__BITNR 0 +#define R_SDRAM_TIMING__cl__WIDTH 2 + +#define R_DRAM_CONFIG (IO_TYPECAST_UDWORD 0xb000000c) +#define R_DRAM_CONFIG__wmm1__BITNR 31 +#define R_DRAM_CONFIG__wmm1__WIDTH 1 +#define R_DRAM_CONFIG__wmm1__wmm 1 +#define R_DRAM_CONFIG__wmm1__norm 0 +#define R_DRAM_CONFIG__wmm0__BITNR 30 +#define R_DRAM_CONFIG__wmm0__WIDTH 1 +#define R_DRAM_CONFIG__wmm0__wmm 1 +#define R_DRAM_CONFIG__wmm0__norm 0 +#define R_DRAM_CONFIG__sh1__BITNR 27 +#define R_DRAM_CONFIG__sh1__WIDTH 3 +#define R_DRAM_CONFIG__sh0__BITNR 24 +#define R_DRAM_CONFIG__sh0__WIDTH 3 +#define R_DRAM_CONFIG__w__BITNR 23 +#define R_DRAM_CONFIG__w__WIDTH 1 +#define R_DRAM_CONFIG__w__bw16 0 +#define R_DRAM_CONFIG__w__bw32 1 +#define R_DRAM_CONFIG__c__BITNR 22 +#define R_DRAM_CONFIG__c__WIDTH 1 +#define R_DRAM_CONFIG__c__byte 0 +#define R_DRAM_CONFIG__c__bank 1 +#define R_DRAM_CONFIG__e__BITNR 21 +#define R_DRAM_CONFIG__e__WIDTH 1 +#define R_DRAM_CONFIG__e__fast 0 +#define R_DRAM_CONFIG__e__edo 1 +#define R_DRAM_CONFIG__group_sel__BITNR 16 +#define R_DRAM_CONFIG__group_sel__WIDTH 5 +#define R_DRAM_CONFIG__group_sel__grp0 0 +#define R_DRAM_CONFIG__group_sel__grp1 1 +#define R_DRAM_CONFIG__group_sel__bit9 9 +#define R_DRAM_CONFIG__group_sel__bit10 10 +#define R_DRAM_CONFIG__group_sel__bit11 11 +#define R_DRAM_CONFIG__group_sel__bit12 12 +#define R_DRAM_CONFIG__group_sel__bit13 13 +#define R_DRAM_CONFIG__group_sel__bit14 14 +#define R_DRAM_CONFIG__group_sel__bit15 15 +#define R_DRAM_CONFIG__group_sel__bit16 16 +#define R_DRAM_CONFIG__group_sel__bit17 17 +#define R_DRAM_CONFIG__group_sel__bit18 18 +#define R_DRAM_CONFIG__group_sel__bit19 19 +#define R_DRAM_CONFIG__group_sel__bit20 20 +#define R_DRAM_CONFIG__group_sel__bit21 21 +#define R_DRAM_CONFIG__group_sel__bit22 22 +#define R_DRAM_CONFIG__group_sel__bit23 23 +#define R_DRAM_CONFIG__group_sel__bit24 24 +#define R_DRAM_CONFIG__group_sel__bit25 25 +#define R_DRAM_CONFIG__group_sel__bit26 26 +#define R_DRAM_CONFIG__group_sel__bit27 27 +#define R_DRAM_CONFIG__group_sel__bit28 28 +#define R_DRAM_CONFIG__group_sel__bit29 29 +#define R_DRAM_CONFIG__ca1__BITNR 13 +#define R_DRAM_CONFIG__ca1__WIDTH 3 +#define R_DRAM_CONFIG__bank23sel__BITNR 8 +#define R_DRAM_CONFIG__bank23sel__WIDTH 5 +#define R_DRAM_CONFIG__bank23sel__bank0 0 +#define R_DRAM_CONFIG__bank23sel__bank1 1 +#define R_DRAM_CONFIG__bank23sel__bit9 9 +#define R_DRAM_CONFIG__bank23sel__bit10 10 +#define R_DRAM_CONFIG__bank23sel__bit11 11 +#define R_DRAM_CONFIG__bank23sel__bit12 12 +#define R_DRAM_CONFIG__bank23sel__bit13 13 +#define R_DRAM_CONFIG__bank23sel__bit14 14 +#define R_DRAM_CONFIG__bank23sel__bit15 15 +#define R_DRAM_CONFIG__bank23sel__bit16 16 +#define R_DRAM_CONFIG__bank23sel__bit17 17 +#define R_DRAM_CONFIG__bank23sel__bit18 18 +#define R_DRAM_CONFIG__bank23sel__bit19 19 +#define R_DRAM_CONFIG__bank23sel__bit20 20 +#define R_DRAM_CONFIG__bank23sel__bit21 21 +#define R_DRAM_CONFIG__bank23sel__bit22 22 +#define R_DRAM_CONFIG__bank23sel__bit23 23 +#define R_DRAM_CONFIG__bank23sel__bit24 24 +#define R_DRAM_CONFIG__bank23sel__bit25 25 +#define R_DRAM_CONFIG__bank23sel__bit26 26 +#define R_DRAM_CONFIG__bank23sel__bit27 27 +#define R_DRAM_CONFIG__bank23sel__bit28 28 +#define R_DRAM_CONFIG__bank23sel__bit29 29 +#define R_DRAM_CONFIG__ca0__BITNR 5 +#define R_DRAM_CONFIG__ca0__WIDTH 3 +#define R_DRAM_CONFIG__bank01sel__BITNR 0 +#define R_DRAM_CONFIG__bank01sel__WIDTH 5 +#define R_DRAM_CONFIG__bank01sel__bank0 0 +#define R_DRAM_CONFIG__bank01sel__bank1 1 +#define R_DRAM_CONFIG__bank01sel__bit9 9 +#define R_DRAM_CONFIG__bank01sel__bit10 10 +#define R_DRAM_CONFIG__bank01sel__bit11 11 +#define R_DRAM_CONFIG__bank01sel__bit12 12 +#define R_DRAM_CONFIG__bank01sel__bit13 13 +#define R_DRAM_CONFIG__bank01sel__bit14 14 +#define R_DRAM_CONFIG__bank01sel__bit15 15 +#define R_DRAM_CONFIG__bank01sel__bit16 16 +#define R_DRAM_CONFIG__bank01sel__bit17 17 +#define R_DRAM_CONFIG__bank01sel__bit18 18 +#define R_DRAM_CONFIG__bank01sel__bit19 19 +#define R_DRAM_CONFIG__bank01sel__bit20 20 +#define R_DRAM_CONFIG__bank01sel__bit21 21 +#define R_DRAM_CONFIG__bank01sel__bit22 22 +#define R_DRAM_CONFIG__bank01sel__bit23 23 +#define R_DRAM_CONFIG__bank01sel__bit24 24 +#define R_DRAM_CONFIG__bank01sel__bit25 25 +#define R_DRAM_CONFIG__bank01sel__bit26 26 +#define R_DRAM_CONFIG__bank01sel__bit27 27 +#define R_DRAM_CONFIG__bank01sel__bit28 28 +#define R_DRAM_CONFIG__bank01sel__bit29 29 + +#define R_SDRAM_CONFIG (IO_TYPECAST_UDWORD 0xb000000c) +#define R_SDRAM_CONFIG__wmm1__BITNR 31 +#define R_SDRAM_CONFIG__wmm1__WIDTH 1 +#define R_SDRAM_CONFIG__wmm1__wmm 1 +#define R_SDRAM_CONFIG__wmm1__norm 0 +#define R_SDRAM_CONFIG__wmm0__BITNR 30 +#define R_SDRAM_CONFIG__wmm0__WIDTH 1 +#define R_SDRAM_CONFIG__wmm0__wmm 1 +#define R_SDRAM_CONFIG__wmm0__norm 0 +#define R_SDRAM_CONFIG__sh1__BITNR 27 +#define R_SDRAM_CONFIG__sh1__WIDTH 3 +#define R_SDRAM_CONFIG__sh0__BITNR 24 +#define R_SDRAM_CONFIG__sh0__WIDTH 3 +#define R_SDRAM_CONFIG__w__BITNR 23 +#define R_SDRAM_CONFIG__w__WIDTH 1 +#define R_SDRAM_CONFIG__w__bw16 0 +#define R_SDRAM_CONFIG__w__bw32 1 +#define R_SDRAM_CONFIG__type1__BITNR 22 +#define R_SDRAM_CONFIG__type1__WIDTH 1 +#define R_SDRAM_CONFIG__type1__bank2 0 +#define R_SDRAM_CONFIG__type1__bank4 1 +#define R_SDRAM_CONFIG__type0__BITNR 21 +#define R_SDRAM_CONFIG__type0__WIDTH 1 +#define R_SDRAM_CONFIG__type0__bank2 0 +#define R_SDRAM_CONFIG__type0__bank4 1 +#define R_SDRAM_CONFIG__group_sel__BITNR 16 +#define R_SDRAM_CONFIG__group_sel__WIDTH 5 +#define R_SDRAM_CONFIG__group_sel__grp0 0 +#define R_SDRAM_CONFIG__group_sel__grp1 1 +#define R_SDRAM_CONFIG__group_sel__bit9 9 +#define R_SDRAM_CONFIG__group_sel__bit10 10 +#define R_SDRAM_CONFIG__group_sel__bit11 11 +#define R_SDRAM_CONFIG__group_sel__bit12 12 +#define R_SDRAM_CONFIG__group_sel__bit13 13 +#define R_SDRAM_CONFIG__group_sel__bit14 14 +#define R_SDRAM_CONFIG__group_sel__bit15 15 +#define R_SDRAM_CONFIG__group_sel__bit16 16 +#define R_SDRAM_CONFIG__group_sel__bit17 17 +#define R_SDRAM_CONFIG__group_sel__bit18 18 +#define R_SDRAM_CONFIG__group_sel__bit19 19 +#define R_SDRAM_CONFIG__group_sel__bit20 20 +#define R_SDRAM_CONFIG__group_sel__bit21 21 +#define R_SDRAM_CONFIG__group_sel__bit22 22 +#define R_SDRAM_CONFIG__group_sel__bit23 23 +#define R_SDRAM_CONFIG__group_sel__bit24 24 +#define R_SDRAM_CONFIG__group_sel__bit25 25 +#define R_SDRAM_CONFIG__group_sel__bit26 26 +#define R_SDRAM_CONFIG__group_sel__bit27 27 +#define R_SDRAM_CONFIG__group_sel__bit28 28 +#define R_SDRAM_CONFIG__group_sel__bit29 29 +#define R_SDRAM_CONFIG__ca1__BITNR 13 +#define R_SDRAM_CONFIG__ca1__WIDTH 3 +#define R_SDRAM_CONFIG__bank_sel1__BITNR 8 +#define R_SDRAM_CONFIG__bank_sel1__WIDTH 5 +#define R_SDRAM_CONFIG__bank_sel1__bit9 9 +#define R_SDRAM_CONFIG__bank_sel1__bit10 10 +#define R_SDRAM_CONFIG__bank_sel1__bit11 11 +#define R_SDRAM_CONFIG__bank_sel1__bit12 12 +#define R_SDRAM_CONFIG__bank_sel1__bit13 13 +#define R_SDRAM_CONFIG__bank_sel1__bit14 14 +#define R_SDRAM_CONFIG__bank_sel1__bit15 15 +#define R_SDRAM_CONFIG__bank_sel1__bit16 16 +#define R_SDRAM_CONFIG__bank_sel1__bit17 17 +#define R_SDRAM_CONFIG__bank_sel1__bit18 18 +#define R_SDRAM_CONFIG__bank_sel1__bit19 19 +#define R_SDRAM_CONFIG__bank_sel1__bit20 20 +#define R_SDRAM_CONFIG__bank_sel1__bit21 21 +#define R_SDRAM_CONFIG__bank_sel1__bit22 22 +#define R_SDRAM_CONFIG__bank_sel1__bit23 23 +#define R_SDRAM_CONFIG__bank_sel1__bit24 24 +#define R_SDRAM_CONFIG__bank_sel1__bit25 25 +#define R_SDRAM_CONFIG__bank_sel1__bit26 26 +#define R_SDRAM_CONFIG__bank_sel1__bit27 27 +#define R_SDRAM_CONFIG__bank_sel1__bit28 28 +#define R_SDRAM_CONFIG__bank_sel1__bit29 29 +#define R_SDRAM_CONFIG__ca0__BITNR 5 +#define R_SDRAM_CONFIG__ca0__WIDTH 3 +#define R_SDRAM_CONFIG__bank_sel0__BITNR 0 +#define R_SDRAM_CONFIG__bank_sel0__WIDTH 5 +#define R_SDRAM_CONFIG__bank_sel0__bit9 9 +#define R_SDRAM_CONFIG__bank_sel0__bit10 10 +#define R_SDRAM_CONFIG__bank_sel0__bit11 11 +#define R_SDRAM_CONFIG__bank_sel0__bit12 12 +#define R_SDRAM_CONFIG__bank_sel0__bit13 13 +#define R_SDRAM_CONFIG__bank_sel0__bit14 14 +#define R_SDRAM_CONFIG__bank_sel0__bit15 15 +#define R_SDRAM_CONFIG__bank_sel0__bit16 16 +#define R_SDRAM_CONFIG__bank_sel0__bit17 17 +#define R_SDRAM_CONFIG__bank_sel0__bit18 18 +#define R_SDRAM_CONFIG__bank_sel0__bit19 19 +#define R_SDRAM_CONFIG__bank_sel0__bit20 20 +#define R_SDRAM_CONFIG__bank_sel0__bit21 21 +#define R_SDRAM_CONFIG__bank_sel0__bit22 22 +#define R_SDRAM_CONFIG__bank_sel0__bit23 23 +#define R_SDRAM_CONFIG__bank_sel0__bit24 24 +#define R_SDRAM_CONFIG__bank_sel0__bit25 25 +#define R_SDRAM_CONFIG__bank_sel0__bit26 26 +#define R_SDRAM_CONFIG__bank_sel0__bit27 27 +#define R_SDRAM_CONFIG__bank_sel0__bit28 28 +#define R_SDRAM_CONFIG__bank_sel0__bit29 29 + +/* +!* External DMA registers +!*/ + +#define R_EXT_DMA_0_CMD (IO_TYPECAST_UDWORD 0xb0000010) +#define R_EXT_DMA_0_CMD__cnt__BITNR 23 +#define R_EXT_DMA_0_CMD__cnt__WIDTH 1 +#define R_EXT_DMA_0_CMD__cnt__enable 1 +#define R_EXT_DMA_0_CMD__cnt__disable 0 +#define R_EXT_DMA_0_CMD__rqpol__BITNR 22 +#define R_EXT_DMA_0_CMD__rqpol__WIDTH 1 +#define R_EXT_DMA_0_CMD__rqpol__ahigh 0 +#define R_EXT_DMA_0_CMD__rqpol__alow 1 +#define R_EXT_DMA_0_CMD__apol__BITNR 21 +#define R_EXT_DMA_0_CMD__apol__WIDTH 1 +#define R_EXT_DMA_0_CMD__apol__ahigh 0 +#define R_EXT_DMA_0_CMD__apol__alow 1 +#define R_EXT_DMA_0_CMD__rq_ack__BITNR 20 +#define R_EXT_DMA_0_CMD__rq_ack__WIDTH 1 +#define R_EXT_DMA_0_CMD__rq_ack__burst 0 +#define R_EXT_DMA_0_CMD__rq_ack__handsh 1 +#define R_EXT_DMA_0_CMD__wid__BITNR 18 +#define R_EXT_DMA_0_CMD__wid__WIDTH 2 +#define R_EXT_DMA_0_CMD__wid__byte 0 +#define R_EXT_DMA_0_CMD__wid__word 1 +#define R_EXT_DMA_0_CMD__wid__dword 2 +#define R_EXT_DMA_0_CMD__dir__BITNR 17 +#define R_EXT_DMA_0_CMD__dir__WIDTH 1 +#define R_EXT_DMA_0_CMD__dir__input 0 +#define R_EXT_DMA_0_CMD__dir__output 1 +#define R_EXT_DMA_0_CMD__run__BITNR 16 +#define R_EXT_DMA_0_CMD__run__WIDTH 1 +#define R_EXT_DMA_0_CMD__run__start 1 +#define R_EXT_DMA_0_CMD__run__stop 0 +#define R_EXT_DMA_0_CMD__trf_count__BITNR 0 +#define R_EXT_DMA_0_CMD__trf_count__WIDTH 16 + +#define R_EXT_DMA_0_STAT (IO_TYPECAST_RO_UDWORD 0xb0000010) +#define R_EXT_DMA_0_STAT__run__BITNR 16 +#define R_EXT_DMA_0_STAT__run__WIDTH 1 +#define R_EXT_DMA_0_STAT__run__start 1 +#define R_EXT_DMA_0_STAT__run__stop 0 +#define R_EXT_DMA_0_STAT__trf_count__BITNR 0 +#define R_EXT_DMA_0_STAT__trf_count__WIDTH 16 + +#define R_EXT_DMA_0_ADDR (IO_TYPECAST_UDWORD 0xb0000014) +#define R_EXT_DMA_0_ADDR__ext0_addr__BITNR 2 +#define R_EXT_DMA_0_ADDR__ext0_addr__WIDTH 28 + +#define R_EXT_DMA_1_CMD (IO_TYPECAST_UDWORD 0xb0000018) +#define R_EXT_DMA_1_CMD__cnt__BITNR 23 +#define R_EXT_DMA_1_CMD__cnt__WIDTH 1 +#define R_EXT_DMA_1_CMD__cnt__enable 1 +#define R_EXT_DMA_1_CMD__cnt__disable 0 +#define R_EXT_DMA_1_CMD__rqpol__BITNR 22 +#define R_EXT_DMA_1_CMD__rqpol__WIDTH 1 +#define R_EXT_DMA_1_CMD__rqpol__ahigh 0 +#define R_EXT_DMA_1_CMD__rqpol__alow 1 +#define R_EXT_DMA_1_CMD__apol__BITNR 21 +#define R_EXT_DMA_1_CMD__apol__WIDTH 1 +#define R_EXT_DMA_1_CMD__apol__ahigh 0 +#define R_EXT_DMA_1_CMD__apol__alow 1 +#define R_EXT_DMA_1_CMD__rq_ack__BITNR 20 +#define R_EXT_DMA_1_CMD__rq_ack__WIDTH 1 +#define R_EXT_DMA_1_CMD__rq_ack__burst 0 +#define R_EXT_DMA_1_CMD__rq_ack__handsh 1 +#define R_EXT_DMA_1_CMD__wid__BITNR 18 +#define R_EXT_DMA_1_CMD__wid__WIDTH 2 +#define R_EXT_DMA_1_CMD__wid__byte 0 +#define R_EXT_DMA_1_CMD__wid__word 1 +#define R_EXT_DMA_1_CMD__wid__dword 2 +#define R_EXT_DMA_1_CMD__dir__BITNR 17 +#define R_EXT_DMA_1_CMD__dir__WIDTH 1 +#define R_EXT_DMA_1_CMD__dir__input 0 +#define R_EXT_DMA_1_CMD__dir__output 1 +#define R_EXT_DMA_1_CMD__run__BITNR 16 +#define R_EXT_DMA_1_CMD__run__WIDTH 1 +#define R_EXT_DMA_1_CMD__run__start 1 +#define R_EXT_DMA_1_CMD__run__stop 0 +#define R_EXT_DMA_1_CMD__trf_count__BITNR 0 +#define R_EXT_DMA_1_CMD__trf_count__WIDTH 16 + +#define R_EXT_DMA_1_STAT (IO_TYPECAST_RO_UDWORD 0xb0000018) +#define R_EXT_DMA_1_STAT__run__BITNR 16 +#define R_EXT_DMA_1_STAT__run__WIDTH 1 +#define R_EXT_DMA_1_STAT__run__start 1 +#define R_EXT_DMA_1_STAT__run__stop 0 +#define R_EXT_DMA_1_STAT__trf_count__BITNR 0 +#define R_EXT_DMA_1_STAT__trf_count__WIDTH 16 + +#define R_EXT_DMA_1_ADDR (IO_TYPECAST_UDWORD 0xb000001c) +#define R_EXT_DMA_1_ADDR__ext0_addr__BITNR 2 +#define R_EXT_DMA_1_ADDR__ext0_addr__WIDTH 28 + +/* +!* Timer registers +!*/ + +#define R_TIMER_CTRL (IO_TYPECAST_UDWORD 0xb0000020) +#define R_TIMER_CTRL__timerdiv1__BITNR 24 +#define R_TIMER_CTRL__timerdiv1__WIDTH 8 +#define R_TIMER_CTRL__timerdiv0__BITNR 16 +#define R_TIMER_CTRL__timerdiv0__WIDTH 8 +#define R_TIMER_CTRL__presc_timer1__BITNR 15 +#define R_TIMER_CTRL__presc_timer1__WIDTH 1 +#define R_TIMER_CTRL__presc_timer1__normal 0 +#define R_TIMER_CTRL__presc_timer1__prescale 1 +#define R_TIMER_CTRL__i1__BITNR 14 +#define R_TIMER_CTRL__i1__WIDTH 1 +#define R_TIMER_CTRL__i1__clr 1 +#define R_TIMER_CTRL__i1__nop 0 +#define R_TIMER_CTRL__tm1__BITNR 12 +#define R_TIMER_CTRL__tm1__WIDTH 2 +#define R_TIMER_CTRL__tm1__stop_ld 0 +#define R_TIMER_CTRL__tm1__freeze 1 +#define R_TIMER_CTRL__tm1__run 2 +#define R_TIMER_CTRL__tm1__reserved 3 +#define R_TIMER_CTRL__clksel1__BITNR 8 +#define R_TIMER_CTRL__clksel1__WIDTH 4 +#define R_TIMER_CTRL__clksel1__c300Hz 0 +#define R_TIMER_CTRL__clksel1__c600Hz 1 +#define R_TIMER_CTRL__clksel1__c1200Hz 2 +#define R_TIMER_CTRL__clksel1__c2400Hz 3 +#define R_TIMER_CTRL__clksel1__c4800Hz 4 +#define R_TIMER_CTRL__clksel1__c9600Hz 5 +#define R_TIMER_CTRL__clksel1__c19k2Hz 6 +#define R_TIMER_CTRL__clksel1__c38k4Hz 7 +#define R_TIMER_CTRL__clksel1__c57k6Hz 8 +#define R_TIMER_CTRL__clksel1__c115k2Hz 9 +#define R_TIMER_CTRL__clksel1__c230k4Hz 10 +#define R_TIMER_CTRL__clksel1__c460k8Hz 11 +#define R_TIMER_CTRL__clksel1__c921k6Hz 12 +#define R_TIMER_CTRL__clksel1__c1843k2Hz 13 +#define R_TIMER_CTRL__clksel1__c6250kHz 14 +#define R_TIMER_CTRL__clksel1__cascade0 15 +#define R_TIMER_CTRL__presc_ext__BITNR 7 +#define R_TIMER_CTRL__presc_ext__WIDTH 1 +#define R_TIMER_CTRL__presc_ext__prescale 0 +#define R_TIMER_CTRL__presc_ext__external 1 +#define R_TIMER_CTRL__i0__BITNR 6 +#define R_TIMER_CTRL__i0__WIDTH 1 +#define R_TIMER_CTRL__i0__clr 1 +#define R_TIMER_CTRL__i0__nop 0 +#define R_TIMER_CTRL__tm0__BITNR 4 +#define R_TIMER_CTRL__tm0__WIDTH 2 +#define R_TIMER_CTRL__tm0__stop_ld 0 +#define R_TIMER_CTRL__tm0__freeze 1 +#define R_TIMER_CTRL__tm0__run 2 +#define R_TIMER_CTRL__tm0__reserved 3 +#define R_TIMER_CTRL__clksel0__BITNR 0 +#define R_TIMER_CTRL__clksel0__WIDTH 4 +#define R_TIMER_CTRL__clksel0__c300Hz 0 +#define R_TIMER_CTRL__clksel0__c600Hz 1 +#define R_TIMER_CTRL__clksel0__c1200Hz 2 +#define R_TIMER_CTRL__clksel0__c2400Hz 3 +#define R_TIMER_CTRL__clksel0__c4800Hz 4 +#define R_TIMER_CTRL__clksel0__c9600Hz 5 +#define R_TIMER_CTRL__clksel0__c19k2Hz 6 +#define R_TIMER_CTRL__clksel0__c38k4Hz 7 +#define R_TIMER_CTRL__clksel0__c57k6Hz 8 +#define R_TIMER_CTRL__clksel0__c115k2Hz 9 +#define R_TIMER_CTRL__clksel0__c230k4Hz 10 +#define R_TIMER_CTRL__clksel0__c460k8Hz 11 +#define R_TIMER_CTRL__clksel0__c921k6Hz 12 +#define R_TIMER_CTRL__clksel0__c1843k2Hz 13 +#define R_TIMER_CTRL__clksel0__c6250kHz 14 +#define R_TIMER_CTRL__clksel0__flexible 15 + +#define R_TIMER_DATA (IO_TYPECAST_RO_UDWORD 0xb0000020) +#define R_TIMER_DATA__timer1__BITNR 24 +#define R_TIMER_DATA__timer1__WIDTH 8 +#define R_TIMER_DATA__timer0__BITNR 16 +#define R_TIMER_DATA__timer0__WIDTH 8 +#define R_TIMER_DATA__clkdiv_high__BITNR 8 +#define R_TIMER_DATA__clkdiv_high__WIDTH 8 +#define R_TIMER_DATA__clkdiv_low__BITNR 0 +#define R_TIMER_DATA__clkdiv_low__WIDTH 8 + +#define R_TIMER01_DATA (IO_TYPECAST_RO_UWORD 0xb0000022) +#define R_TIMER01_DATA__count__BITNR 0 +#define R_TIMER01_DATA__count__WIDTH 16 + +#define R_TIMER0_DATA (IO_TYPECAST_RO_BYTE 0xb0000022) +#define R_TIMER0_DATA__count__BITNR 0 +#define R_TIMER0_DATA__count__WIDTH 8 + +#define R_TIMER1_DATA (IO_TYPECAST_RO_BYTE 0xb0000023) +#define R_TIMER1_DATA__count__BITNR 0 +#define R_TIMER1_DATA__count__WIDTH 8 + +#define R_WATCHDOG (IO_TYPECAST_UDWORD 0xb0000024) +#define R_WATCHDOG__key__BITNR 1 +#define R_WATCHDOG__key__WIDTH 3 +#define R_WATCHDOG__enable__BITNR 0 +#define R_WATCHDOG__enable__WIDTH 1 +#define R_WATCHDOG__enable__stop 0 +#define R_WATCHDOG__enable__start 1 + +#define R_CLOCK_PRESCALE (IO_TYPECAST_UDWORD 0xb00000f0) +#define R_CLOCK_PRESCALE__ser_presc__BITNR 16 +#define R_CLOCK_PRESCALE__ser_presc__WIDTH 16 +#define R_CLOCK_PRESCALE__tim_presc__BITNR 0 +#define R_CLOCK_PRESCALE__tim_presc__WIDTH 16 + +#define R_SERIAL_PRESCALE (IO_TYPECAST_UWORD 0xb00000f2) +#define R_SERIAL_PRESCALE__ser_presc__BITNR 0 +#define R_SERIAL_PRESCALE__ser_presc__WIDTH 16 + +#define R_TIMER_PRESCALE (IO_TYPECAST_UWORD 0xb00000f0) +#define R_TIMER_PRESCALE__tim_presc__BITNR 0 +#define R_TIMER_PRESCALE__tim_presc__WIDTH 16 + +#define R_PRESCALE_STATUS (IO_TYPECAST_RO_UDWORD 0xb00000f0) +#define R_PRESCALE_STATUS__ser_status__BITNR 16 +#define R_PRESCALE_STATUS__ser_status__WIDTH 16 +#define R_PRESCALE_STATUS__tim_status__BITNR 0 +#define R_PRESCALE_STATUS__tim_status__WIDTH 16 + +#define R_SER_PRESC_STATUS (IO_TYPECAST_RO_UWORD 0xb00000f2) +#define R_SER_PRESC_STATUS__ser_status__BITNR 0 +#define R_SER_PRESC_STATUS__ser_status__WIDTH 16 + +#define R_TIM_PRESC_STATUS (IO_TYPECAST_RO_UWORD 0xb00000f0) +#define R_TIM_PRESC_STATUS__tim_status__BITNR 0 +#define R_TIM_PRESC_STATUS__tim_status__WIDTH 16 + +#define R_SYNC_SERIAL_PRESCALE (IO_TYPECAST_UDWORD 0xb00000f4) +#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__BITNR 23 +#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__WIDTH 1 +#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__codec 0 +#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__baudrate 1 +#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__BITNR 22 +#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__WIDTH 1 +#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__external 0 +#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__internal 1 +#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__BITNR 21 +#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__WIDTH 1 +#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__codec 0 +#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__baudrate 1 +#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__BITNR 20 +#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__WIDTH 1 +#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__external 0 +#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__internal 1 +#define R_SYNC_SERIAL_PRESCALE__prescaler__BITNR 16 +#define R_SYNC_SERIAL_PRESCALE__prescaler__WIDTH 3 +#define R_SYNC_SERIAL_PRESCALE__prescaler__div1 0 +#define R_SYNC_SERIAL_PRESCALE__prescaler__div2 1 +#define R_SYNC_SERIAL_PRESCALE__prescaler__div4 2 +#define R_SYNC_SERIAL_PRESCALE__prescaler__div8 3 +#define R_SYNC_SERIAL_PRESCALE__prescaler__div16 4 +#define R_SYNC_SERIAL_PRESCALE__prescaler__div32 5 +#define R_SYNC_SERIAL_PRESCALE__prescaler__div64 6 +#define R_SYNC_SERIAL_PRESCALE__prescaler__div128 7 +#define R_SYNC_SERIAL_PRESCALE__warp_mode__BITNR 15 +#define R_SYNC_SERIAL_PRESCALE__warp_mode__WIDTH 1 +#define R_SYNC_SERIAL_PRESCALE__warp_mode__normal 0 +#define R_SYNC_SERIAL_PRESCALE__warp_mode__enabled 1 +#define R_SYNC_SERIAL_PRESCALE__frame_rate__BITNR 11 +#define R_SYNC_SERIAL_PRESCALE__frame_rate__WIDTH 4 +#define R_SYNC_SERIAL_PRESCALE__word_rate__BITNR 0 +#define R_SYNC_SERIAL_PRESCALE__word_rate__WIDTH 10 + +/* +!* Shared RAM interface registers +!*/ + +#define R_SHARED_RAM_CONFIG (IO_TYPECAST_UDWORD 0xb0000040) +#define R_SHARED_RAM_CONFIG__width__BITNR 3 +#define R_SHARED_RAM_CONFIG__width__WIDTH 1 +#define R_SHARED_RAM_CONFIG__width__byte 0 +#define R_SHARED_RAM_CONFIG__width__word 1 +#define R_SHARED_RAM_CONFIG__enable__BITNR 2 +#define R_SHARED_RAM_CONFIG__enable__WIDTH 1 +#define R_SHARED_RAM_CONFIG__enable__yes 1 +#define R_SHARED_RAM_CONFIG__enable__no 0 +#define R_SHARED_RAM_CONFIG__pint__BITNR 1 +#define R_SHARED_RAM_CONFIG__pint__WIDTH 1 +#define R_SHARED_RAM_CONFIG__pint__int 1 +#define R_SHARED_RAM_CONFIG__pint__nop 0 +#define R_SHARED_RAM_CONFIG__clri__BITNR 0 +#define R_SHARED_RAM_CONFIG__clri__WIDTH 1 +#define R_SHARED_RAM_CONFIG__clri__clr 1 +#define R_SHARED_RAM_CONFIG__clri__nop 0 + +#define R_SHARED_RAM_ADDR (IO_TYPECAST_UDWORD 0xb0000044) +#define R_SHARED_RAM_ADDR__base_addr__BITNR 8 +#define R_SHARED_RAM_ADDR__base_addr__WIDTH 22 + +/* +!* General config registers +!*/ + +#define R_GEN_CONFIG (IO_TYPECAST_UDWORD 0xb000002c) +#define R_GEN_CONFIG__par_w__BITNR 31 +#define R_GEN_CONFIG__par_w__WIDTH 1 +#define R_GEN_CONFIG__par_w__select 1 +#define R_GEN_CONFIG__par_w__disable 0 +#define R_GEN_CONFIG__usb2__BITNR 30 +#define R_GEN_CONFIG__usb2__WIDTH 1 +#define R_GEN_CONFIG__usb2__select 1 +#define R_GEN_CONFIG__usb2__disable 0 +#define R_GEN_CONFIG__usb1__BITNR 29 +#define R_GEN_CONFIG__usb1__WIDTH 1 +#define R_GEN_CONFIG__usb1__select 1 +#define R_GEN_CONFIG__usb1__disable 0 +#define R_GEN_CONFIG__g24dir__BITNR 27 +#define R_GEN_CONFIG__g24dir__WIDTH 1 +#define R_GEN_CONFIG__g24dir__in 0 +#define R_GEN_CONFIG__g24dir__out 1 +#define R_GEN_CONFIG__g16_23dir__BITNR 26 +#define R_GEN_CONFIG__g16_23dir__WIDTH 1 +#define R_GEN_CONFIG__g16_23dir__in 0 +#define R_GEN_CONFIG__g16_23dir__out 1 +#define R_GEN_CONFIG__g8_15dir__BITNR 25 +#define R_GEN_CONFIG__g8_15dir__WIDTH 1 +#define R_GEN_CONFIG__g8_15dir__in 0 +#define R_GEN_CONFIG__g8_15dir__out 1 +#define R_GEN_CONFIG__g0dir__BITNR 24 +#define R_GEN_CONFIG__g0dir__WIDTH 1 +#define R_GEN_CONFIG__g0dir__in 0 +#define R_GEN_CONFIG__g0dir__out 1 +#define R_GEN_CONFIG__dma9__BITNR 23 +#define R_GEN_CONFIG__dma9__WIDTH 1 +#define R_GEN_CONFIG__dma9__usb 0 +#define R_GEN_CONFIG__dma9__serial1 1 +#define R_GEN_CONFIG__dma8__BITNR 22 +#define R_GEN_CONFIG__dma8__WIDTH 1 +#define R_GEN_CONFIG__dma8__usb 0 +#define R_GEN_CONFIG__dma8__serial1 1 +#define R_GEN_CONFIG__dma7__BITNR 20 +#define R_GEN_CONFIG__dma7__WIDTH 2 +#define R_GEN_CONFIG__dma7__unused 0 +#define R_GEN_CONFIG__dma7__serial0 1 +#define R_GEN_CONFIG__dma7__extdma1 2 +#define R_GEN_CONFIG__dma7__intdma6 3 +#define R_GEN_CONFIG__dma6__BITNR 18 +#define R_GEN_CONFIG__dma6__WIDTH 2 +#define R_GEN_CONFIG__dma6__unused 0 +#define R_GEN_CONFIG__dma6__serial0 1 +#define R_GEN_CONFIG__dma6__extdma1 2 +#define R_GEN_CONFIG__dma6__intdma7 3 +#define R_GEN_CONFIG__dma5__BITNR 16 +#define R_GEN_CONFIG__dma5__WIDTH 2 +#define R_GEN_CONFIG__dma5__par1 0 +#define R_GEN_CONFIG__dma5__scsi1 1 +#define R_GEN_CONFIG__dma5__serial3 2 +#define R_GEN_CONFIG__dma5__extdma0 3 +#define R_GEN_CONFIG__dma4__BITNR 14 +#define R_GEN_CONFIG__dma4__WIDTH 2 +#define R_GEN_CONFIG__dma4__par1 0 +#define R_GEN_CONFIG__dma4__scsi1 1 +#define R_GEN_CONFIG__dma4__serial3 2 +#define R_GEN_CONFIG__dma4__extdma0 3 +#define R_GEN_CONFIG__dma3__BITNR 12 +#define R_GEN_CONFIG__dma3__WIDTH 2 +#define R_GEN_CONFIG__dma3__par0 0 +#define R_GEN_CONFIG__dma3__scsi0 1 +#define R_GEN_CONFIG__dma3__serial2 2 +#define R_GEN_CONFIG__dma3__ata 3 +#define R_GEN_CONFIG__dma2__BITNR 10 +#define R_GEN_CONFIG__dma2__WIDTH 2 +#define R_GEN_CONFIG__dma2__par0 0 +#define R_GEN_CONFIG__dma2__scsi0 1 +#define R_GEN_CONFIG__dma2__serial2 2 +#define R_GEN_CONFIG__dma2__ata 3 +#define R_GEN_CONFIG__mio_w__BITNR 9 +#define R_GEN_CONFIG__mio_w__WIDTH 1 +#define R_GEN_CONFIG__mio_w__select 1 +#define R_GEN_CONFIG__mio_w__disable 0 +#define R_GEN_CONFIG__ser3__BITNR 8 +#define R_GEN_CONFIG__ser3__WIDTH 1 +#define R_GEN_CONFIG__ser3__select 1 +#define R_GEN_CONFIG__ser3__disable 0 +#define R_GEN_CONFIG__par1__BITNR 7 +#define R_GEN_CONFIG__par1__WIDTH 1 +#define R_GEN_CONFIG__par1__select 1 +#define R_GEN_CONFIG__par1__disable 0 +#define R_GEN_CONFIG__scsi0w__BITNR 6 +#define R_GEN_CONFIG__scsi0w__WIDTH 1 +#define R_GEN_CONFIG__scsi0w__select 1 +#define R_GEN_CONFIG__scsi0w__disable 0 +#define R_GEN_CONFIG__scsi1__BITNR 5 +#define R_GEN_CONFIG__scsi1__WIDTH 1 +#define R_GEN_CONFIG__scsi1__select 1 +#define R_GEN_CONFIG__scsi1__disable 0 +#define R_GEN_CONFIG__mio__BITNR 4 +#define R_GEN_CONFIG__mio__WIDTH 1 +#define R_GEN_CONFIG__mio__select 1 +#define R_GEN_CONFIG__mio__disable 0 +#define R_GEN_CONFIG__ser2__BITNR 3 +#define R_GEN_CONFIG__ser2__WIDTH 1 +#define R_GEN_CONFIG__ser2__select 1 +#define R_GEN_CONFIG__ser2__disable 0 +#define R_GEN_CONFIG__par0__BITNR 2 +#define R_GEN_CONFIG__par0__WIDTH 1 +#define R_GEN_CONFIG__par0__select 1 +#define R_GEN_CONFIG__par0__disable 0 +#define R_GEN_CONFIG__ata__BITNR 1 +#define R_GEN_CONFIG__ata__WIDTH 1 +#define R_GEN_CONFIG__ata__select 1 +#define R_GEN_CONFIG__ata__disable 0 +#define R_GEN_CONFIG__scsi0__BITNR 0 +#define R_GEN_CONFIG__scsi0__WIDTH 1 +#define R_GEN_CONFIG__scsi0__select 1 +#define R_GEN_CONFIG__scsi0__disable 0 + +#define R_GEN_CONFIG_II (IO_TYPECAST_UDWORD 0xb0000034) +#define R_GEN_CONFIG_II__sermode3__BITNR 6 +#define R_GEN_CONFIG_II__sermode3__WIDTH 1 +#define R_GEN_CONFIG_II__sermode3__async 0 +#define R_GEN_CONFIG_II__sermode3__sync 1 +#define R_GEN_CONFIG_II__sermode1__BITNR 4 +#define R_GEN_CONFIG_II__sermode1__WIDTH 1 +#define R_GEN_CONFIG_II__sermode1__async 0 +#define R_GEN_CONFIG_II__sermode1__sync 1 +#define R_GEN_CONFIG_II__ext_clk__BITNR 2 +#define R_GEN_CONFIG_II__ext_clk__WIDTH 1 +#define R_GEN_CONFIG_II__ext_clk__select 1 +#define R_GEN_CONFIG_II__ext_clk__disable 0 +#define R_GEN_CONFIG_II__ser2__BITNR 1 +#define R_GEN_CONFIG_II__ser2__WIDTH 1 +#define R_GEN_CONFIG_II__ser2__select 1 +#define R_GEN_CONFIG_II__ser2__disable 0 +#define R_GEN_CONFIG_II__ser3__BITNR 0 +#define R_GEN_CONFIG_II__ser3__WIDTH 1 +#define R_GEN_CONFIG_II__ser3__select 1 +#define R_GEN_CONFIG_II__ser3__disable 0 + +#define R_PORT_G_DATA (IO_TYPECAST_UDWORD 0xb0000028) +#define R_PORT_G_DATA__data__BITNR 0 +#define R_PORT_G_DATA__data__WIDTH 32 + +/* +!* General port configuration registers +!*/ + +#define R_PORT_PA_SET (IO_TYPECAST_UDWORD 0xb0000030) +#define R_PORT_PA_SET__dir7__BITNR 15 +#define R_PORT_PA_SET__dir7__WIDTH 1 +#define R_PORT_PA_SET__dir7__input 0 +#define R_PORT_PA_SET__dir7__output 1 +#define R_PORT_PA_SET__dir6__BITNR 14 +#define R_PORT_PA_SET__dir6__WIDTH 1 +#define R_PORT_PA_SET__dir6__input 0 +#define R_PORT_PA_SET__dir6__output 1 +#define R_PORT_PA_SET__dir5__BITNR 13 +#define R_PORT_PA_SET__dir5__WIDTH 1 +#define R_PORT_PA_SET__dir5__input 0 +#define R_PORT_PA_SET__dir5__output 1 +#define R_PORT_PA_SET__dir4__BITNR 12 +#define R_PORT_PA_SET__dir4__WIDTH 1 +#define R_PORT_PA_SET__dir4__input 0 +#define R_PORT_PA_SET__dir4__output 1 +#define R_PORT_PA_SET__dir3__BITNR 11 +#define R_PORT_PA_SET__dir3__WIDTH 1 +#define R_PORT_PA_SET__dir3__input 0 +#define R_PORT_PA_SET__dir3__output 1 +#define R_PORT_PA_SET__dir2__BITNR 10 +#define R_PORT_PA_SET__dir2__WIDTH 1 +#define R_PORT_PA_SET__dir2__input 0 +#define R_PORT_PA_SET__dir2__output 1 +#define R_PORT_PA_SET__dir1__BITNR 9 +#define R_PORT_PA_SET__dir1__WIDTH 1 +#define R_PORT_PA_SET__dir1__input 0 +#define R_PORT_PA_SET__dir1__output 1 +#define R_PORT_PA_SET__dir0__BITNR 8 +#define R_PORT_PA_SET__dir0__WIDTH 1 +#define R_PORT_PA_SET__dir0__input 0 +#define R_PORT_PA_SET__dir0__output 1 +#define R_PORT_PA_SET__data_out__BITNR 0 +#define R_PORT_PA_SET__data_out__WIDTH 8 + +#define R_PORT_PA_DATA (IO_TYPECAST_BYTE 0xb0000030) +#define R_PORT_PA_DATA__data_out__BITNR 0 +#define R_PORT_PA_DATA__data_out__WIDTH 8 + +#define R_PORT_PA_DIR (IO_TYPECAST_BYTE 0xb0000031) +#define R_PORT_PA_DIR__dir7__BITNR 7 +#define R_PORT_PA_DIR__dir7__WIDTH 1 +#define R_PORT_PA_DIR__dir7__input 0 +#define R_PORT_PA_DIR__dir7__output 1 +#define R_PORT_PA_DIR__dir6__BITNR 6 +#define R_PORT_PA_DIR__dir6__WIDTH 1 +#define R_PORT_PA_DIR__dir6__input 0 +#define R_PORT_PA_DIR__dir6__output 1 +#define R_PORT_PA_DIR__dir5__BITNR 5 +#define R_PORT_PA_DIR__dir5__WIDTH 1 +#define R_PORT_PA_DIR__dir5__input 0 +#define R_PORT_PA_DIR__dir5__output 1 +#define R_PORT_PA_DIR__dir4__BITNR 4 +#define R_PORT_PA_DIR__dir4__WIDTH 1 +#define R_PORT_PA_DIR__dir4__input 0 +#define R_PORT_PA_DIR__dir4__output 1 +#define R_PORT_PA_DIR__dir3__BITNR 3 +#define R_PORT_PA_DIR__dir3__WIDTH 1 +#define R_PORT_PA_DIR__dir3__input 0 +#define R_PORT_PA_DIR__dir3__output 1 +#define R_PORT_PA_DIR__dir2__BITNR 2 +#define R_PORT_PA_DIR__dir2__WIDTH 1 +#define R_PORT_PA_DIR__dir2__input 0 +#define R_PORT_PA_DIR__dir2__output 1 +#define R_PORT_PA_DIR__dir1__BITNR 1 +#define R_PORT_PA_DIR__dir1__WIDTH 1 +#define R_PORT_PA_DIR__dir1__input 0 +#define R_PORT_PA_DIR__dir1__output 1 +#define R_PORT_PA_DIR__dir0__BITNR 0 +#define R_PORT_PA_DIR__dir0__WIDTH 1 +#define R_PORT_PA_DIR__dir0__input 0 +#define R_PORT_PA_DIR__dir0__output 1 + +#define R_PORT_PA_READ (IO_TYPECAST_RO_UDWORD 0xb0000030) +#define R_PORT_PA_READ__data_in__BITNR 0 +#define R_PORT_PA_READ__data_in__WIDTH 8 + +#define R_PORT_PB_SET (IO_TYPECAST_UDWORD 0xb0000038) +#define R_PORT_PB_SET__syncser3__BITNR 29 +#define R_PORT_PB_SET__syncser3__WIDTH 1 +#define R_PORT_PB_SET__syncser3__port_cs 0 +#define R_PORT_PB_SET__syncser3__ss3extra 1 +#define R_PORT_PB_SET__syncser1__BITNR 28 +#define R_PORT_PB_SET__syncser1__WIDTH 1 +#define R_PORT_PB_SET__syncser1__port_cs 0 +#define R_PORT_PB_SET__syncser1__ss1extra 1 +#define R_PORT_PB_SET__i2c_en__BITNR 27 +#define R_PORT_PB_SET__i2c_en__WIDTH 1 +#define R_PORT_PB_SET__i2c_en__off 0 +#define R_PORT_PB_SET__i2c_en__on 1 +#define R_PORT_PB_SET__i2c_d__BITNR 26 +#define R_PORT_PB_SET__i2c_d__WIDTH 1 +#define R_PORT_PB_SET__i2c_clk__BITNR 25 +#define R_PORT_PB_SET__i2c_clk__WIDTH 1 +#define R_PORT_PB_SET__i2c_oe___BITNR 24 +#define R_PORT_PB_SET__i2c_oe___WIDTH 1 +#define R_PORT_PB_SET__i2c_oe___enable 0 +#define R_PORT_PB_SET__i2c_oe___disable 1 +#define R_PORT_PB_SET__cs7__BITNR 23 +#define R_PORT_PB_SET__cs7__WIDTH 1 +#define R_PORT_PB_SET__cs7__port 0 +#define R_PORT_PB_SET__cs7__cs 1 +#define R_PORT_PB_SET__cs6__BITNR 22 +#define R_PORT_PB_SET__cs6__WIDTH 1 +#define R_PORT_PB_SET__cs6__port 0 +#define R_PORT_PB_SET__cs6__cs 1 +#define R_PORT_PB_SET__cs5__BITNR 21 +#define R_PORT_PB_SET__cs5__WIDTH 1 +#define R_PORT_PB_SET__cs5__port 0 +#define R_PORT_PB_SET__cs5__cs 1 +#define R_PORT_PB_SET__cs4__BITNR 20 +#define R_PORT_PB_SET__cs4__WIDTH 1 +#define R_PORT_PB_SET__cs4__port 0 +#define R_PORT_PB_SET__cs4__cs 1 +#define R_PORT_PB_SET__cs3__BITNR 19 +#define R_PORT_PB_SET__cs3__WIDTH 1 +#define R_PORT_PB_SET__cs3__port 0 +#define R_PORT_PB_SET__cs3__cs 1 +#define R_PORT_PB_SET__cs2__BITNR 18 +#define R_PORT_PB_SET__cs2__WIDTH 1 +#define R_PORT_PB_SET__cs2__port 0 +#define R_PORT_PB_SET__cs2__cs 1 +#define R_PORT_PB_SET__scsi1__BITNR 17 +#define R_PORT_PB_SET__scsi1__WIDTH 1 +#define R_PORT_PB_SET__scsi1__port_cs 0 +#define R_PORT_PB_SET__scsi1__enph 1 +#define R_PORT_PB_SET__scsi0__BITNR 16 +#define R_PORT_PB_SET__scsi0__WIDTH 1 +#define R_PORT_PB_SET__scsi0__port_cs 0 +#define R_PORT_PB_SET__scsi0__enph 1 +#define R_PORT_PB_SET__dir7__BITNR 15 +#define R_PORT_PB_SET__dir7__WIDTH 1 +#define R_PORT_PB_SET__dir7__input 0 +#define R_PORT_PB_SET__dir7__output 1 +#define R_PORT_PB_SET__dir6__BITNR 14 +#define R_PORT_PB_SET__dir6__WIDTH 1 +#define R_PORT_PB_SET__dir6__input 0 +#define R_PORT_PB_SET__dir6__output 1 +#define R_PORT_PB_SET__dir5__BITNR 13 +#define R_PORT_PB_SET__dir5__WIDTH 1 +#define R_PORT_PB_SET__dir5__input 0 +#define R_PORT_PB_SET__dir5__output 1 +#define R_PORT_PB_SET__dir4__BITNR 12 +#define R_PORT_PB_SET__dir4__WIDTH 1 +#define R_PORT_PB_SET__dir4__input 0 +#define R_PORT_PB_SET__dir4__output 1 +#define R_PORT_PB_SET__dir3__BITNR 11 +#define R_PORT_PB_SET__dir3__WIDTH 1 +#define R_PORT_PB_SET__dir3__input 0 +#define R_PORT_PB_SET__dir3__output 1 +#define R_PORT_PB_SET__dir2__BITNR 10 +#define R_PORT_PB_SET__dir2__WIDTH 1 +#define R_PORT_PB_SET__dir2__input 0 +#define R_PORT_PB_SET__dir2__output 1 +#define R_PORT_PB_SET__dir1__BITNR 9 +#define R_PORT_PB_SET__dir1__WIDTH 1 +#define R_PORT_PB_SET__dir1__input 0 +#define R_PORT_PB_SET__dir1__output 1 +#define R_PORT_PB_SET__dir0__BITNR 8 +#define R_PORT_PB_SET__dir0__WIDTH 1 +#define R_PORT_PB_SET__dir0__input 0 +#define R_PORT_PB_SET__dir0__output 1 +#define R_PORT_PB_SET__data_out__BITNR 0 +#define R_PORT_PB_SET__data_out__WIDTH 8 + +#define R_PORT_PB_DATA (IO_TYPECAST_BYTE 0xb0000038) +#define R_PORT_PB_DATA__data_out__BITNR 0 +#define R_PORT_PB_DATA__data_out__WIDTH 8 + +#define R_PORT_PB_DIR (IO_TYPECAST_BYTE 0xb0000039) +#define R_PORT_PB_DIR__dir7__BITNR 7 +#define R_PORT_PB_DIR__dir7__WIDTH 1 +#define R_PORT_PB_DIR__dir7__input 0 +#define R_PORT_PB_DIR__dir7__output 1 +#define R_PORT_PB_DIR__dir6__BITNR 6 +#define R_PORT_PB_DIR__dir6__WIDTH 1 +#define R_PORT_PB_DIR__dir6__input 0 +#define R_PORT_PB_DIR__dir6__output 1 +#define R_PORT_PB_DIR__dir5__BITNR 5 +#define R_PORT_PB_DIR__dir5__WIDTH 1 +#define R_PORT_PB_DIR__dir5__input 0 +#define R_PORT_PB_DIR__dir5__output 1 +#define R_PORT_PB_DIR__dir4__BITNR 4 +#define R_PORT_PB_DIR__dir4__WIDTH 1 +#define R_PORT_PB_DIR__dir4__input 0 +#define R_PORT_PB_DIR__dir4__output 1 +#define R_PORT_PB_DIR__dir3__BITNR 3 +#define R_PORT_PB_DIR__dir3__WIDTH 1 +#define R_PORT_PB_DIR__dir3__input 0 +#define R_PORT_PB_DIR__dir3__output 1 +#define R_PORT_PB_DIR__dir2__BITNR 2 +#define R_PORT_PB_DIR__dir2__WIDTH 1 +#define R_PORT_PB_DIR__dir2__input 0 +#define R_PORT_PB_DIR__dir2__output 1 +#define R_PORT_PB_DIR__dir1__BITNR 1 +#define R_PORT_PB_DIR__dir1__WIDTH 1 +#define R_PORT_PB_DIR__dir1__input 0 +#define R_PORT_PB_DIR__dir1__output 1 +#define R_PORT_PB_DIR__dir0__BITNR 0 +#define R_PORT_PB_DIR__dir0__WIDTH 1 +#define R_PORT_PB_DIR__dir0__input 0 +#define R_PORT_PB_DIR__dir0__output 1 + +#define R_PORT_PB_CONFIG (IO_TYPECAST_BYTE 0xb000003a) +#define R_PORT_PB_CONFIG__cs7__BITNR 7 +#define R_PORT_PB_CONFIG__cs7__WIDTH 1 +#define R_PORT_PB_CONFIG__cs7__port 0 +#define R_PORT_PB_CONFIG__cs7__cs 1 +#define R_PORT_PB_CONFIG__cs6__BITNR 6 +#define R_PORT_PB_CONFIG__cs6__WIDTH 1 +#define R_PORT_PB_CONFIG__cs6__port 0 +#define R_PORT_PB_CONFIG__cs6__cs 1 +#define R_PORT_PB_CONFIG__cs5__BITNR 5 +#define R_PORT_PB_CONFIG__cs5__WIDTH 1 +#define R_PORT_PB_CONFIG__cs5__port 0 +#define R_PORT_PB_CONFIG__cs5__cs 1 +#define R_PORT_PB_CONFIG__cs4__BITNR 4 +#define R_PORT_PB_CONFIG__cs4__WIDTH 1 +#define R_PORT_PB_CONFIG__cs4__port 0 +#define R_PORT_PB_CONFIG__cs4__cs 1 +#define R_PORT_PB_CONFIG__cs3__BITNR 3 +#define R_PORT_PB_CONFIG__cs3__WIDTH 1 +#define R_PORT_PB_CONFIG__cs3__port 0 +#define R_PORT_PB_CONFIG__cs3__cs 1 +#define R_PORT_PB_CONFIG__cs2__BITNR 2 +#define R_PORT_PB_CONFIG__cs2__WIDTH 1 +#define R_PORT_PB_CONFIG__cs2__port 0 +#define R_PORT_PB_CONFIG__cs2__cs 1 +#define R_PORT_PB_CONFIG__scsi1__BITNR 1 +#define R_PORT_PB_CONFIG__scsi1__WIDTH 1 +#define R_PORT_PB_CONFIG__scsi1__port_cs 0 +#define R_PORT_PB_CONFIG__scsi1__enph 1 +#define R_PORT_PB_CONFIG__scsi0__BITNR 0 +#define R_PORT_PB_CONFIG__scsi0__WIDTH 1 +#define R_PORT_PB_CONFIG__scsi0__port_cs 0 +#define R_PORT_PB_CONFIG__scsi0__enph 1 + +#define R_PORT_PB_I2C (IO_TYPECAST_BYTE 0xb000003b) +#define R_PORT_PB_I2C__syncser3__BITNR 5 +#define R_PORT_PB_I2C__syncser3__WIDTH 1 +#define R_PORT_PB_I2C__syncser3__port_cs 0 +#define R_PORT_PB_I2C__syncser3__ss3extra 1 +#define R_PORT_PB_I2C__syncser1__BITNR 4 +#define R_PORT_PB_I2C__syncser1__WIDTH 1 +#define R_PORT_PB_I2C__syncser1__port_cs 0 +#define R_PORT_PB_I2C__syncser1__ss1extra 1 +#define R_PORT_PB_I2C__i2c_en__BITNR 3 +#define R_PORT_PB_I2C__i2c_en__WIDTH 1 +#define R_PORT_PB_I2C__i2c_en__off 0 +#define R_PORT_PB_I2C__i2c_en__on 1 +#define R_PORT_PB_I2C__i2c_d__BITNR 2 +#define R_PORT_PB_I2C__i2c_d__WIDTH 1 +#define R_PORT_PB_I2C__i2c_clk__BITNR 1 +#define R_PORT_PB_I2C__i2c_clk__WIDTH 1 +#define R_PORT_PB_I2C__i2c_oe___BITNR 0 +#define R_PORT_PB_I2C__i2c_oe___WIDTH 1 +#define R_PORT_PB_I2C__i2c_oe___enable 0 +#define R_PORT_PB_I2C__i2c_oe___disable 1 + +#define R_PORT_PB_READ (IO_TYPECAST_RO_UDWORD 0xb0000038) +#define R_PORT_PB_READ__data_in__BITNR 0 +#define R_PORT_PB_READ__data_in__WIDTH 8 + +/* +!* Serial port registers +!*/ + +#define R_SERIAL0_CTRL (IO_TYPECAST_UDWORD 0xb0000060) +#define R_SERIAL0_CTRL__tr_baud__BITNR 28 +#define R_SERIAL0_CTRL__tr_baud__WIDTH 4 +#define R_SERIAL0_CTRL__tr_baud__c300Hz 0 +#define R_SERIAL0_CTRL__tr_baud__c600Hz 1 +#define R_SERIAL0_CTRL__tr_baud__c1200Hz 2 +#define R_SERIAL0_CTRL__tr_baud__c2400Hz 3 +#define R_SERIAL0_CTRL__tr_baud__c4800Hz 4 +#define R_SERIAL0_CTRL__tr_baud__c9600Hz 5 +#define R_SERIAL0_CTRL__tr_baud__c19k2Hz 6 +#define R_SERIAL0_CTRL__tr_baud__c38k4Hz 7 +#define R_SERIAL0_CTRL__tr_baud__c57k6Hz 8 +#define R_SERIAL0_CTRL__tr_baud__c115k2Hz 9 +#define R_SERIAL0_CTRL__tr_baud__c230k4Hz 10 +#define R_SERIAL0_CTRL__tr_baud__c460k8Hz 11 +#define R_SERIAL0_CTRL__tr_baud__c921k6Hz 12 +#define R_SERIAL0_CTRL__tr_baud__c1843k2Hz 13 +#define R_SERIAL0_CTRL__tr_baud__c6250kHz 14 +#define R_SERIAL0_CTRL__tr_baud__reserved 15 +#define R_SERIAL0_CTRL__rec_baud__BITNR 24 +#define R_SERIAL0_CTRL__rec_baud__WIDTH 4 +#define R_SERIAL0_CTRL__rec_baud__c300Hz 0 +#define R_SERIAL0_CTRL__rec_baud__c600Hz 1 +#define R_SERIAL0_CTRL__rec_baud__c1200Hz 2 +#define R_SERIAL0_CTRL__rec_baud__c2400Hz 3 +#define R_SERIAL0_CTRL__rec_baud__c4800Hz 4 +#define R_SERIAL0_CTRL__rec_baud__c9600Hz 5 +#define R_SERIAL0_CTRL__rec_baud__c19k2Hz 6 +#define R_SERIAL0_CTRL__rec_baud__c38k4Hz 7 +#define R_SERIAL0_CTRL__rec_baud__c57k6Hz 8 +#define R_SERIAL0_CTRL__rec_baud__c115k2Hz 9 +#define R_SERIAL0_CTRL__rec_baud__c230k4Hz 10 +#define R_SERIAL0_CTRL__rec_baud__c460k8Hz 11 +#define R_SERIAL0_CTRL__rec_baud__c921k6Hz 12 +#define R_SERIAL0_CTRL__rec_baud__c1843k2Hz 13 +#define R_SERIAL0_CTRL__rec_baud__c6250kHz 14 +#define R_SERIAL0_CTRL__rec_baud__reserved 15 +#define R_SERIAL0_CTRL__dma_err__BITNR 23 +#define R_SERIAL0_CTRL__dma_err__WIDTH 1 +#define R_SERIAL0_CTRL__dma_err__stop 0 +#define R_SERIAL0_CTRL__dma_err__ignore 1 +#define R_SERIAL0_CTRL__rec_enable__BITNR 22 +#define R_SERIAL0_CTRL__rec_enable__WIDTH 1 +#define R_SERIAL0_CTRL__rec_enable__disable 0 +#define R_SERIAL0_CTRL__rec_enable__enable 1 +#define R_SERIAL0_CTRL__rts___BITNR 21 +#define R_SERIAL0_CTRL__rts___WIDTH 1 +#define R_SERIAL0_CTRL__rts___active 0 +#define R_SERIAL0_CTRL__rts___inactive 1 +#define R_SERIAL0_CTRL__sampling__BITNR 20 +#define R_SERIAL0_CTRL__sampling__WIDTH 1 +#define R_SERIAL0_CTRL__sampling__middle 0 +#define R_SERIAL0_CTRL__sampling__majority 1 +#define R_SERIAL0_CTRL__rec_stick_par__BITNR 19 +#define R_SERIAL0_CTRL__rec_stick_par__WIDTH 1 +#define R_SERIAL0_CTRL__rec_stick_par__normal 0 +#define R_SERIAL0_CTRL__rec_stick_par__stick 1 +#define R_SERIAL0_CTRL__rec_par__BITNR 18 +#define R_SERIAL0_CTRL__rec_par__WIDTH 1 +#define R_SERIAL0_CTRL__rec_par__even 0 +#define R_SERIAL0_CTRL__rec_par__odd 1 +#define R_SERIAL0_CTRL__rec_par_en__BITNR 17 +#define R_SERIAL0_CTRL__rec_par_en__WIDTH 1 +#define R_SERIAL0_CTRL__rec_par_en__disable 0 +#define R_SERIAL0_CTRL__rec_par_en__enable 1 +#define R_SERIAL0_CTRL__rec_bitnr__BITNR 16 +#define R_SERIAL0_CTRL__rec_bitnr__WIDTH 1 +#define R_SERIAL0_CTRL__rec_bitnr__rec_8bit 0 +#define R_SERIAL0_CTRL__rec_bitnr__rec_7bit 1 +#define R_SERIAL0_CTRL__txd__BITNR 15 +#define R_SERIAL0_CTRL__txd__WIDTH 1 +#define R_SERIAL0_CTRL__tr_enable__BITNR 14 +#define R_SERIAL0_CTRL__tr_enable__WIDTH 1 +#define R_SERIAL0_CTRL__tr_enable__disable 0 +#define R_SERIAL0_CTRL__tr_enable__enable 1 +#define R_SERIAL0_CTRL__auto_cts__BITNR 13 +#define R_SERIAL0_CTRL__auto_cts__WIDTH 1 +#define R_SERIAL0_CTRL__auto_cts__disabled 0 +#define R_SERIAL0_CTRL__auto_cts__active 1 +#define R_SERIAL0_CTRL__stop_bits__BITNR 12 +#define R_SERIAL0_CTRL__stop_bits__WIDTH 1 +#define R_SERIAL0_CTRL__stop_bits__one_bit 0 +#define R_SERIAL0_CTRL__stop_bits__two_bits 1 +#define R_SERIAL0_CTRL__tr_stick_par__BITNR 11 +#define R_SERIAL0_CTRL__tr_stick_par__WIDTH 1 +#define R_SERIAL0_CTRL__tr_stick_par__normal 0 +#define R_SERIAL0_CTRL__tr_stick_par__stick 1 +#define R_SERIAL0_CTRL__tr_par__BITNR 10 +#define R_SERIAL0_CTRL__tr_par__WIDTH 1 +#define R_SERIAL0_CTRL__tr_par__even 0 +#define R_SERIAL0_CTRL__tr_par__odd 1 +#define R_SERIAL0_CTRL__tr_par_en__BITNR 9 +#define R_SERIAL0_CTRL__tr_par_en__WIDTH 1 +#define R_SERIAL0_CTRL__tr_par_en__disable 0 +#define R_SERIAL0_CTRL__tr_par_en__enable 1 +#define R_SERIAL0_CTRL__tr_bitnr__BITNR 8 +#define R_SERIAL0_CTRL__tr_bitnr__WIDTH 1 +#define R_SERIAL0_CTRL__tr_bitnr__tr_8bit 0 +#define R_SERIAL0_CTRL__tr_bitnr__tr_7bit 1 +#define R_SERIAL0_CTRL__data_out__BITNR 0 +#define R_SERIAL0_CTRL__data_out__WIDTH 8 + +#define R_SERIAL0_BAUD (IO_TYPECAST_BYTE 0xb0000063) +#define R_SERIAL0_BAUD__tr_baud__BITNR 4 +#define R_SERIAL0_BAUD__tr_baud__WIDTH 4 +#define R_SERIAL0_BAUD__tr_baud__c300Hz 0 +#define R_SERIAL0_BAUD__tr_baud__c600Hz 1 +#define R_SERIAL0_BAUD__tr_baud__c1200Hz 2 +#define R_SERIAL0_BAUD__tr_baud__c2400Hz 3 +#define R_SERIAL0_BAUD__tr_baud__c4800Hz 4 +#define R_SERIAL0_BAUD__tr_baud__c9600Hz 5 +#define R_SERIAL0_BAUD__tr_baud__c19k2Hz 6 +#define R_SERIAL0_BAUD__tr_baud__c38k4Hz 7 +#define R_SERIAL0_BAUD__tr_baud__c57k6Hz 8 +#define R_SERIAL0_BAUD__tr_baud__c115k2Hz 9 +#define R_SERIAL0_BAUD__tr_baud__c230k4Hz 10 +#define R_SERIAL0_BAUD__tr_baud__c460k8Hz 11 +#define R_SERIAL0_BAUD__tr_baud__c921k6Hz 12 +#define R_SERIAL0_BAUD__tr_baud__c1843k2Hz 13 +#define R_SERIAL0_BAUD__tr_baud__c6250kHz 14 +#define R_SERIAL0_BAUD__tr_baud__reserved 15 +#define R_SERIAL0_BAUD__rec_baud__BITNR 0 +#define R_SERIAL0_BAUD__rec_baud__WIDTH 4 +#define R_SERIAL0_BAUD__rec_baud__c300Hz 0 +#define R_SERIAL0_BAUD__rec_baud__c600Hz 1 +#define R_SERIAL0_BAUD__rec_baud__c1200Hz 2 +#define R_SERIAL0_BAUD__rec_baud__c2400Hz 3 +#define R_SERIAL0_BAUD__rec_baud__c4800Hz 4 +#define R_SERIAL0_BAUD__rec_baud__c9600Hz 5 +#define R_SERIAL0_BAUD__rec_baud__c19k2Hz 6 +#define R_SERIAL0_BAUD__rec_baud__c38k4Hz 7 +#define R_SERIAL0_BAUD__rec_baud__c57k6Hz 8 +#define R_SERIAL0_BAUD__rec_baud__c115k2Hz 9 +#define R_SERIAL0_BAUD__rec_baud__c230k4Hz 10 +#define R_SERIAL0_BAUD__rec_baud__c460k8Hz 11 +#define R_SERIAL0_BAUD__rec_baud__c921k6Hz 12 +#define R_SERIAL0_BAUD__rec_baud__c1843k2Hz 13 +#define R_SERIAL0_BAUD__rec_baud__c6250kHz 14 +#define R_SERIAL0_BAUD__rec_baud__reserved 15 + +#define R_SERIAL0_REC_CTRL (IO_TYPECAST_BYTE 0xb0000062) +#define R_SERIAL0_REC_CTRL__dma_err__BITNR 7 +#define R_SERIAL0_REC_CTRL__dma_err__WIDTH 1 +#define R_SERIAL0_REC_CTRL__dma_err__stop 0 +#define R_SERIAL0_REC_CTRL__dma_err__ignore 1 +#define R_SERIAL0_REC_CTRL__rec_enable__BITNR 6 +#define R_SERIAL0_REC_CTRL__rec_enable__WIDTH 1 +#define R_SERIAL0_REC_CTRL__rec_enable__disable 0 +#define R_SERIAL0_REC_CTRL__rec_enable__enable 1 +#define R_SERIAL0_REC_CTRL__rts___BITNR 5 +#define R_SERIAL0_REC_CTRL__rts___WIDTH 1 +#define R_SERIAL0_REC_CTRL__rts___active 0 +#define R_SERIAL0_REC_CTRL__rts___inactive 1 +#define R_SERIAL0_REC_CTRL__sampling__BITNR 4 +#define R_SERIAL0_REC_CTRL__sampling__WIDTH 1 +#define R_SERIAL0_REC_CTRL__sampling__middle 0 +#define R_SERIAL0_REC_CTRL__sampling__majority 1 +#define R_SERIAL0_REC_CTRL__rec_stick_par__BITNR 3 +#define R_SERIAL0_REC_CTRL__rec_stick_par__WIDTH 1 +#define R_SERIAL0_REC_CTRL__rec_stick_par__normal 0 +#define R_SERIAL0_REC_CTRL__rec_stick_par__stick 1 +#define R_SERIAL0_REC_CTRL__rec_par__BITNR 2 +#define R_SERIAL0_REC_CTRL__rec_par__WIDTH 1 +#define R_SERIAL0_REC_CTRL__rec_par__even 0 +#define R_SERIAL0_REC_CTRL__rec_par__odd 1 +#define R_SERIAL0_REC_CTRL__rec_par_en__BITNR 1 +#define R_SERIAL0_REC_CTRL__rec_par_en__WIDTH 1 +#define R_SERIAL0_REC_CTRL__rec_par_en__disable 0 +#define R_SERIAL0_REC_CTRL__rec_par_en__enable 1 +#define R_SERIAL0_REC_CTRL__rec_bitnr__BITNR 0 +#define R_SERIAL0_REC_CTRL__rec_bitnr__WIDTH 1 +#define R_SERIAL0_REC_CTRL__rec_bitnr__rec_8bit 0 +#define R_SERIAL0_REC_CTRL__rec_bitnr__rec_7bit 1 + +#define R_SERIAL0_TR_CTRL (IO_TYPECAST_BYTE 0xb0000061) +#define R_SERIAL0_TR_CTRL__txd__BITNR 7 +#define R_SERIAL0_TR_CTRL__txd__WIDTH 1 +#define R_SERIAL0_TR_CTRL__tr_enable__BITNR 6 +#define R_SERIAL0_TR_CTRL__tr_enable__WIDTH 1 +#define R_SERIAL0_TR_CTRL__tr_enable__disable 0 +#define R_SERIAL0_TR_CTRL__tr_enable__enable 1 +#define R_SERIAL0_TR_CTRL__auto_cts__BITNR 5 +#define R_SERIAL0_TR_CTRL__auto_cts__WIDTH 1 +#define R_SERIAL0_TR_CTRL__auto_cts__disabled 0 +#define R_SERIAL0_TR_CTRL__auto_cts__active 1 +#define R_SERIAL0_TR_CTRL__stop_bits__BITNR 4 +#define R_SERIAL0_TR_CTRL__stop_bits__WIDTH 1 +#define R_SERIAL0_TR_CTRL__stop_bits__one_bit 0 +#define R_SERIAL0_TR_CTRL__stop_bits__two_bits 1 +#define R_SERIAL0_TR_CTRL__tr_stick_par__BITNR 3 +#define R_SERIAL0_TR_CTRL__tr_stick_par__WIDTH 1 +#define R_SERIAL0_TR_CTRL__tr_stick_par__normal 0 +#define R_SERIAL0_TR_CTRL__tr_stick_par__stick 1 +#define R_SERIAL0_TR_CTRL__tr_par__BITNR 2 +#define R_SERIAL0_TR_CTRL__tr_par__WIDTH 1 +#define R_SERIAL0_TR_CTRL__tr_par__even 0 +#define R_SERIAL0_TR_CTRL__tr_par__odd 1 +#define R_SERIAL0_TR_CTRL__tr_par_en__BITNR 1 +#define R_SERIAL0_TR_CTRL__tr_par_en__WIDTH 1 +#define R_SERIAL0_TR_CTRL__tr_par_en__disable 0 +#define R_SERIAL0_TR_CTRL__tr_par_en__enable 1 +#define R_SERIAL0_TR_CTRL__tr_bitnr__BITNR 0 +#define R_SERIAL0_TR_CTRL__tr_bitnr__WIDTH 1 +#define R_SERIAL0_TR_CTRL__tr_bitnr__tr_8bit 0 +#define R_SERIAL0_TR_CTRL__tr_bitnr__tr_7bit 1 + +#define R_SERIAL0_TR_DATA (IO_TYPECAST_BYTE 0xb0000060) +#define R_SERIAL0_TR_DATA__data_out__BITNR 0 +#define R_SERIAL0_TR_DATA__data_out__WIDTH 8 + +#define R_SERIAL0_READ (IO_TYPECAST_RO_UDWORD 0xb0000060) +#define R_SERIAL0_READ__xoff_detect__BITNR 15 +#define R_SERIAL0_READ__xoff_detect__WIDTH 1 +#define R_SERIAL0_READ__xoff_detect__no_xoff 0 +#define R_SERIAL0_READ__xoff_detect__xoff 1 +#define R_SERIAL0_READ__cts___BITNR 14 +#define R_SERIAL0_READ__cts___WIDTH 1 +#define R_SERIAL0_READ__cts___active 0 +#define R_SERIAL0_READ__cts___inactive 1 +#define R_SERIAL0_READ__tr_ready__BITNR 13 +#define R_SERIAL0_READ__tr_ready__WIDTH 1 +#define R_SERIAL0_READ__tr_ready__full 0 +#define R_SERIAL0_READ__tr_ready__ready 1 +#define R_SERIAL0_READ__rxd__BITNR 12 +#define R_SERIAL0_READ__rxd__WIDTH 1 +#define R_SERIAL0_READ__overrun__BITNR 11 +#define R_SERIAL0_READ__overrun__WIDTH 1 +#define R_SERIAL0_READ__overrun__no 0 +#define R_SERIAL0_READ__overrun__yes 1 +#define R_SERIAL0_READ__par_err__BITNR 10 +#define R_SERIAL0_READ__par_err__WIDTH 1 +#define R_SERIAL0_READ__par_err__no 0 +#define R_SERIAL0_READ__par_err__yes 1 +#define R_SERIAL0_READ__framing_err__BITNR 9 +#define R_SERIAL0_READ__framing_err__WIDTH 1 +#define R_SERIAL0_READ__framing_err__no 0 +#define R_SERIAL0_READ__framing_err__yes 1 +#define R_SERIAL0_READ__data_avail__BITNR 8 +#define R_SERIAL0_READ__data_avail__WIDTH 1 +#define R_SERIAL0_READ__data_avail__no 0 +#define R_SERIAL0_READ__data_avail__yes 1 +#define R_SERIAL0_READ__data_in__BITNR 0 +#define R_SERIAL0_READ__data_in__WIDTH 8 + +#define R_SERIAL0_STATUS (IO_TYPECAST_RO_BYTE 0xb0000061) +#define R_SERIAL0_STATUS__xoff_detect__BITNR 7 +#define R_SERIAL0_STATUS__xoff_detect__WIDTH 1 +#define R_SERIAL0_STATUS__xoff_detect__no_xoff 0 +#define R_SERIAL0_STATUS__xoff_detect__xoff 1 +#define R_SERIAL0_STATUS__cts___BITNR 6 +#define R_SERIAL0_STATUS__cts___WIDTH 1 +#define R_SERIAL0_STATUS__cts___active 0 +#define R_SERIAL0_STATUS__cts___inactive 1 +#define R_SERIAL0_STATUS__tr_ready__BITNR 5 +#define R_SERIAL0_STATUS__tr_ready__WIDTH 1 +#define R_SERIAL0_STATUS__tr_ready__full 0 +#define R_SERIAL0_STATUS__tr_ready__ready 1 +#define R_SERIAL0_STATUS__rxd__BITNR 4 +#define R_SERIAL0_STATUS__rxd__WIDTH 1 +#define R_SERIAL0_STATUS__overrun__BITNR 3 +#define R_SERIAL0_STATUS__overrun__WIDTH 1 +#define R_SERIAL0_STATUS__overrun__no 0 +#define R_SERIAL0_STATUS__overrun__yes 1 +#define R_SERIAL0_STATUS__par_err__BITNR 2 +#define R_SERIAL0_STATUS__par_err__WIDTH 1 +#define R_SERIAL0_STATUS__par_err__no 0 +#define R_SERIAL0_STATUS__par_err__yes 1 +#define R_SERIAL0_STATUS__framing_err__BITNR 1 +#define R_SERIAL0_STATUS__framing_err__WIDTH 1 +#define R_SERIAL0_STATUS__framing_err__no 0 +#define R_SERIAL0_STATUS__framing_err__yes 1 +#define R_SERIAL0_STATUS__data_avail__BITNR 0 +#define R_SERIAL0_STATUS__data_avail__WIDTH 1 +#define R_SERIAL0_STATUS__data_avail__no 0 +#define R_SERIAL0_STATUS__data_avail__yes 1 + +#define R_SERIAL0_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000060) +#define R_SERIAL0_REC_DATA__data_in__BITNR 0 +#define R_SERIAL0_REC_DATA__data_in__WIDTH 8 + +#define R_SERIAL0_XOFF (IO_TYPECAST_UDWORD 0xb0000064) +#define R_SERIAL0_XOFF__tx_stop__BITNR 9 +#define R_SERIAL0_XOFF__tx_stop__WIDTH 1 +#define R_SERIAL0_XOFF__tx_stop__enable 0 +#define R_SERIAL0_XOFF__tx_stop__stop 1 +#define R_SERIAL0_XOFF__auto_xoff__BITNR 8 +#define R_SERIAL0_XOFF__auto_xoff__WIDTH 1 +#define R_SERIAL0_XOFF__auto_xoff__disable 0 +#define R_SERIAL0_XOFF__auto_xoff__enable 1 +#define R_SERIAL0_XOFF__xoff_char__BITNR 0 +#define R_SERIAL0_XOFF__xoff_char__WIDTH 8 + +#define R_SERIAL1_CTRL (IO_TYPECAST_UDWORD 0xb0000068) +#define R_SERIAL1_CTRL__tr_baud__BITNR 28 +#define R_SERIAL1_CTRL__tr_baud__WIDTH 4 +#define R_SERIAL1_CTRL__tr_baud__c300Hz 0 +#define R_SERIAL1_CTRL__tr_baud__c600Hz 1 +#define R_SERIAL1_CTRL__tr_baud__c1200Hz 2 +#define R_SERIAL1_CTRL__tr_baud__c2400Hz 3 +#define R_SERIAL1_CTRL__tr_baud__c4800Hz 4 +#define R_SERIAL1_CTRL__tr_baud__c9600Hz 5 +#define R_SERIAL1_CTRL__tr_baud__c19k2Hz 6 +#define R_SERIAL1_CTRL__tr_baud__c38k4Hz 7 +#define R_SERIAL1_CTRL__tr_baud__c57k6Hz 8 +#define R_SERIAL1_CTRL__tr_baud__c115k2Hz 9 +#define R_SERIAL1_CTRL__tr_baud__c230k4Hz 10 +#define R_SERIAL1_CTRL__tr_baud__c460k8Hz 11 +#define R_SERIAL1_CTRL__tr_baud__c921k6Hz 12 +#define R_SERIAL1_CTRL__tr_baud__c1843k2Hz 13 +#define R_SERIAL1_CTRL__tr_baud__c6250kHz 14 +#define R_SERIAL1_CTRL__tr_baud__reserved 15 +#define R_SERIAL1_CTRL__rec_baud__BITNR 24 +#define R_SERIAL1_CTRL__rec_baud__WIDTH 4 +#define R_SERIAL1_CTRL__rec_baud__c300Hz 0 +#define R_SERIAL1_CTRL__rec_baud__c600Hz 1 +#define R_SERIAL1_CTRL__rec_baud__c1200Hz 2 +#define R_SERIAL1_CTRL__rec_baud__c2400Hz 3 +#define R_SERIAL1_CTRL__rec_baud__c4800Hz 4 +#define R_SERIAL1_CTRL__rec_baud__c9600Hz 5 +#define R_SERIAL1_CTRL__rec_baud__c19k2Hz 6 +#define R_SERIAL1_CTRL__rec_baud__c38k4Hz 7 +#define R_SERIAL1_CTRL__rec_baud__c57k6Hz 8 +#define R_SERIAL1_CTRL__rec_baud__c115k2Hz 9 +#define R_SERIAL1_CTRL__rec_baud__c230k4Hz 10 +#define R_SERIAL1_CTRL__rec_baud__c460k8Hz 11 +#define R_SERIAL1_CTRL__rec_baud__c921k6Hz 12 +#define R_SERIAL1_CTRL__rec_baud__c1843k2Hz 13 +#define R_SERIAL1_CTRL__rec_baud__c6250kHz 14 +#define R_SERIAL1_CTRL__rec_baud__reserved 15 +#define R_SERIAL1_CTRL__dma_err__BITNR 23 +#define R_SERIAL1_CTRL__dma_err__WIDTH 1 +#define R_SERIAL1_CTRL__dma_err__stop 0 +#define R_SERIAL1_CTRL__dma_err__ignore 1 +#define R_SERIAL1_CTRL__rec_enable__BITNR 22 +#define R_SERIAL1_CTRL__rec_enable__WIDTH 1 +#define R_SERIAL1_CTRL__rec_enable__disable 0 +#define R_SERIAL1_CTRL__rec_enable__enable 1 +#define R_SERIAL1_CTRL__rts___BITNR 21 +#define R_SERIAL1_CTRL__rts___WIDTH 1 +#define R_SERIAL1_CTRL__rts___active 0 +#define R_SERIAL1_CTRL__rts___inactive 1 +#define R_SERIAL1_CTRL__sampling__BITNR 20 +#define R_SERIAL1_CTRL__sampling__WIDTH 1 +#define R_SERIAL1_CTRL__sampling__middle 0 +#define R_SERIAL1_CTRL__sampling__majority 1 +#define R_SERIAL1_CTRL__rec_stick_par__BITNR 19 +#define R_SERIAL1_CTRL__rec_stick_par__WIDTH 1 +#define R_SERIAL1_CTRL__rec_stick_par__normal 0 +#define R_SERIAL1_CTRL__rec_stick_par__stick 1 +#define R_SERIAL1_CTRL__rec_par__BITNR 18 +#define R_SERIAL1_CTRL__rec_par__WIDTH 1 +#define R_SERIAL1_CTRL__rec_par__even 0 +#define R_SERIAL1_CTRL__rec_par__odd 1 +#define R_SERIAL1_CTRL__rec_par_en__BITNR 17 +#define R_SERIAL1_CTRL__rec_par_en__WIDTH 1 +#define R_SERIAL1_CTRL__rec_par_en__disable 0 +#define R_SERIAL1_CTRL__rec_par_en__enable 1 +#define R_SERIAL1_CTRL__rec_bitnr__BITNR 16 +#define R_SERIAL1_CTRL__rec_bitnr__WIDTH 1 +#define R_SERIAL1_CTRL__rec_bitnr__rec_8bit 0 +#define R_SERIAL1_CTRL__rec_bitnr__rec_7bit 1 +#define R_SERIAL1_CTRL__txd__BITNR 15 +#define R_SERIAL1_CTRL__txd__WIDTH 1 +#define R_SERIAL1_CTRL__tr_enable__BITNR 14 +#define R_SERIAL1_CTRL__tr_enable__WIDTH 1 +#define R_SERIAL1_CTRL__tr_enable__disable 0 +#define R_SERIAL1_CTRL__tr_enable__enable 1 +#define R_SERIAL1_CTRL__auto_cts__BITNR 13 +#define R_SERIAL1_CTRL__auto_cts__WIDTH 1 +#define R_SERIAL1_CTRL__auto_cts__disabled 0 +#define R_SERIAL1_CTRL__auto_cts__active 1 +#define R_SERIAL1_CTRL__stop_bits__BITNR 12 +#define R_SERIAL1_CTRL__stop_bits__WIDTH 1 +#define R_SERIAL1_CTRL__stop_bits__one_bit 0 +#define R_SERIAL1_CTRL__stop_bits__two_bits 1 +#define R_SERIAL1_CTRL__tr_stick_par__BITNR 11 +#define R_SERIAL1_CTRL__tr_stick_par__WIDTH 1 +#define R_SERIAL1_CTRL__tr_stick_par__normal 0 +#define R_SERIAL1_CTRL__tr_stick_par__stick 1 +#define R_SERIAL1_CTRL__tr_par__BITNR 10 +#define R_SERIAL1_CTRL__tr_par__WIDTH 1 +#define R_SERIAL1_CTRL__tr_par__even 0 +#define R_SERIAL1_CTRL__tr_par__odd 1 +#define R_SERIAL1_CTRL__tr_par_en__BITNR 9 +#define R_SERIAL1_CTRL__tr_par_en__WIDTH 1 +#define R_SERIAL1_CTRL__tr_par_en__disable 0 +#define R_SERIAL1_CTRL__tr_par_en__enable 1 +#define R_SERIAL1_CTRL__tr_bitnr__BITNR 8 +#define R_SERIAL1_CTRL__tr_bitnr__WIDTH 1 +#define R_SERIAL1_CTRL__tr_bitnr__tr_8bit 0 +#define R_SERIAL1_CTRL__tr_bitnr__tr_7bit 1 +#define R_SERIAL1_CTRL__data_out__BITNR 0 +#define R_SERIAL1_CTRL__data_out__WIDTH 8 + +#define R_SERIAL1_BAUD (IO_TYPECAST_BYTE 0xb000006b) +#define R_SERIAL1_BAUD__tr_baud__BITNR 4 +#define R_SERIAL1_BAUD__tr_baud__WIDTH 4 +#define R_SERIAL1_BAUD__tr_baud__c300Hz 0 +#define R_SERIAL1_BAUD__tr_baud__c600Hz 1 +#define R_SERIAL1_BAUD__tr_baud__c1200Hz 2 +#define R_SERIAL1_BAUD__tr_baud__c2400Hz 3 +#define R_SERIAL1_BAUD__tr_baud__c4800Hz 4 +#define R_SERIAL1_BAUD__tr_baud__c9600Hz 5 +#define R_SERIAL1_BAUD__tr_baud__c19k2Hz 6 +#define R_SERIAL1_BAUD__tr_baud__c38k4Hz 7 +#define R_SERIAL1_BAUD__tr_baud__c57k6Hz 8 +#define R_SERIAL1_BAUD__tr_baud__c115k2Hz 9 +#define R_SERIAL1_BAUD__tr_baud__c230k4Hz 10 +#define R_SERIAL1_BAUD__tr_baud__c460k8Hz 11 +#define R_SERIAL1_BAUD__tr_baud__c921k6Hz 12 +#define R_SERIAL1_BAUD__tr_baud__c1843k2Hz 13 +#define R_SERIAL1_BAUD__tr_baud__c6250kHz 14 +#define R_SERIAL1_BAUD__tr_baud__reserved 15 +#define R_SERIAL1_BAUD__rec_baud__BITNR 0 +#define R_SERIAL1_BAUD__rec_baud__WIDTH 4 +#define R_SERIAL1_BAUD__rec_baud__c300Hz 0 +#define R_SERIAL1_BAUD__rec_baud__c600Hz 1 +#define R_SERIAL1_BAUD__rec_baud__c1200Hz 2 +#define R_SERIAL1_BAUD__rec_baud__c2400Hz 3 +#define R_SERIAL1_BAUD__rec_baud__c4800Hz 4 +#define R_SERIAL1_BAUD__rec_baud__c9600Hz 5 +#define R_SERIAL1_BAUD__rec_baud__c19k2Hz 6 +#define R_SERIAL1_BAUD__rec_baud__c38k4Hz 7 +#define R_SERIAL1_BAUD__rec_baud__c57k6Hz 8 +#define R_SERIAL1_BAUD__rec_baud__c115k2Hz 9 +#define R_SERIAL1_BAUD__rec_baud__c230k4Hz 10 +#define R_SERIAL1_BAUD__rec_baud__c460k8Hz 11 +#define R_SERIAL1_BAUD__rec_baud__c921k6Hz 12 +#define R_SERIAL1_BAUD__rec_baud__c1843k2Hz 13 +#define R_SERIAL1_BAUD__rec_baud__c6250kHz 14 +#define R_SERIAL1_BAUD__rec_baud__reserved 15 + +#define R_SERIAL1_REC_CTRL (IO_TYPECAST_BYTE 0xb000006a) +#define R_SERIAL1_REC_CTRL__dma_err__BITNR 7 +#define R_SERIAL1_REC_CTRL__dma_err__WIDTH 1 +#define R_SERIAL1_REC_CTRL__dma_err__stop 0 +#define R_SERIAL1_REC_CTRL__dma_err__ignore 1 +#define R_SERIAL1_REC_CTRL__rec_enable__BITNR 6 +#define R_SERIAL1_REC_CTRL__rec_enable__WIDTH 1 +#define R_SERIAL1_REC_CTRL__rec_enable__disable 0 +#define R_SERIAL1_REC_CTRL__rec_enable__enable 1 +#define R_SERIAL1_REC_CTRL__rts___BITNR 5 +#define R_SERIAL1_REC_CTRL__rts___WIDTH 1 +#define R_SERIAL1_REC_CTRL__rts___active 0 +#define R_SERIAL1_REC_CTRL__rts___inactive 1 +#define R_SERIAL1_REC_CTRL__sampling__BITNR 4 +#define R_SERIAL1_REC_CTRL__sampling__WIDTH 1 +#define R_SERIAL1_REC_CTRL__sampling__middle 0 +#define R_SERIAL1_REC_CTRL__sampling__majority 1 +#define R_SERIAL1_REC_CTRL__rec_stick_par__BITNR 3 +#define R_SERIAL1_REC_CTRL__rec_stick_par__WIDTH 1 +#define R_SERIAL1_REC_CTRL__rec_stick_par__normal 0 +#define R_SERIAL1_REC_CTRL__rec_stick_par__stick 1 +#define R_SERIAL1_REC_CTRL__rec_par__BITNR 2 +#define R_SERIAL1_REC_CTRL__rec_par__WIDTH 1 +#define R_SERIAL1_REC_CTRL__rec_par__even 0 +#define R_SERIAL1_REC_CTRL__rec_par__odd 1 +#define R_SERIAL1_REC_CTRL__rec_par_en__BITNR 1 +#define R_SERIAL1_REC_CTRL__rec_par_en__WIDTH 1 +#define R_SERIAL1_REC_CTRL__rec_par_en__disable 0 +#define R_SERIAL1_REC_CTRL__rec_par_en__enable 1 +#define R_SERIAL1_REC_CTRL__rec_bitnr__BITNR 0 +#define R_SERIAL1_REC_CTRL__rec_bitnr__WIDTH 1 +#define R_SERIAL1_REC_CTRL__rec_bitnr__rec_8bit 0 +#define R_SERIAL1_REC_CTRL__rec_bitnr__rec_7bit 1 + +#define R_SERIAL1_TR_CTRL (IO_TYPECAST_BYTE 0xb0000069) +#define R_SERIAL1_TR_CTRL__txd__BITNR 7 +#define R_SERIAL1_TR_CTRL__txd__WIDTH 1 +#define R_SERIAL1_TR_CTRL__tr_enable__BITNR 6 +#define R_SERIAL1_TR_CTRL__tr_enable__WIDTH 1 +#define R_SERIAL1_TR_CTRL__tr_enable__disable 0 +#define R_SERIAL1_TR_CTRL__tr_enable__enable 1 +#define R_SERIAL1_TR_CTRL__auto_cts__BITNR 5 +#define R_SERIAL1_TR_CTRL__auto_cts__WIDTH 1 +#define R_SERIAL1_TR_CTRL__auto_cts__disabled 0 +#define R_SERIAL1_TR_CTRL__auto_cts__active 1 +#define R_SERIAL1_TR_CTRL__stop_bits__BITNR 4 +#define R_SERIAL1_TR_CTRL__stop_bits__WIDTH 1 +#define R_SERIAL1_TR_CTRL__stop_bits__one_bit 0 +#define R_SERIAL1_TR_CTRL__stop_bits__two_bits 1 +#define R_SERIAL1_TR_CTRL__tr_stick_par__BITNR 3 +#define R_SERIAL1_TR_CTRL__tr_stick_par__WIDTH 1 +#define R_SERIAL1_TR_CTRL__tr_stick_par__normal 0 +#define R_SERIAL1_TR_CTRL__tr_stick_par__stick 1 +#define R_SERIAL1_TR_CTRL__tr_par__BITNR 2 +#define R_SERIAL1_TR_CTRL__tr_par__WIDTH 1 +#define R_SERIAL1_TR_CTRL__tr_par__even 0 +#define R_SERIAL1_TR_CTRL__tr_par__odd 1 +#define R_SERIAL1_TR_CTRL__tr_par_en__BITNR 1 +#define R_SERIAL1_TR_CTRL__tr_par_en__WIDTH 1 +#define R_SERIAL1_TR_CTRL__tr_par_en__disable 0 +#define R_SERIAL1_TR_CTRL__tr_par_en__enable 1 +#define R_SERIAL1_TR_CTRL__tr_bitnr__BITNR 0 +#define R_SERIAL1_TR_CTRL__tr_bitnr__WIDTH 1 +#define R_SERIAL1_TR_CTRL__tr_bitnr__tr_8bit 0 +#define R_SERIAL1_TR_CTRL__tr_bitnr__tr_7bit 1 + +#define R_SERIAL1_TR_DATA (IO_TYPECAST_BYTE 0xb0000068) +#define R_SERIAL1_TR_DATA__data_out__BITNR 0 +#define R_SERIAL1_TR_DATA__data_out__WIDTH 8 + +#define R_SERIAL1_READ (IO_TYPECAST_RO_UDWORD 0xb0000068) +#define R_SERIAL1_READ__xoff_detect__BITNR 15 +#define R_SERIAL1_READ__xoff_detect__WIDTH 1 +#define R_SERIAL1_READ__xoff_detect__no_xoff 0 +#define R_SERIAL1_READ__xoff_detect__xoff 1 +#define R_SERIAL1_READ__cts___BITNR 14 +#define R_SERIAL1_READ__cts___WIDTH 1 +#define R_SERIAL1_READ__cts___active 0 +#define R_SERIAL1_READ__cts___inactive 1 +#define R_SERIAL1_READ__tr_ready__BITNR 13 +#define R_SERIAL1_READ__tr_ready__WIDTH 1 +#define R_SERIAL1_READ__tr_ready__full 0 +#define R_SERIAL1_READ__tr_ready__ready 1 +#define R_SERIAL1_READ__rxd__BITNR 12 +#define R_SERIAL1_READ__rxd__WIDTH 1 +#define R_SERIAL1_READ__overrun__BITNR 11 +#define R_SERIAL1_READ__overrun__WIDTH 1 +#define R_SERIAL1_READ__overrun__no 0 +#define R_SERIAL1_READ__overrun__yes 1 +#define R_SERIAL1_READ__par_err__BITNR 10 +#define R_SERIAL1_READ__par_err__WIDTH 1 +#define R_SERIAL1_READ__par_err__no 0 +#define R_SERIAL1_READ__par_err__yes 1 +#define R_SERIAL1_READ__framing_err__BITNR 9 +#define R_SERIAL1_READ__framing_err__WIDTH 1 +#define R_SERIAL1_READ__framing_err__no 0 +#define R_SERIAL1_READ__framing_err__yes 1 +#define R_SERIAL1_READ__data_avail__BITNR 8 +#define R_SERIAL1_READ__data_avail__WIDTH 1 +#define R_SERIAL1_READ__data_avail__no 0 +#define R_SERIAL1_READ__data_avail__yes 1 +#define R_SERIAL1_READ__data_in__BITNR 0 +#define R_SERIAL1_READ__data_in__WIDTH 8 + +#define R_SERIAL1_STATUS (IO_TYPECAST_RO_BYTE 0xb0000069) +#define R_SERIAL1_STATUS__xoff_detect__BITNR 7 +#define R_SERIAL1_STATUS__xoff_detect__WIDTH 1 +#define R_SERIAL1_STATUS__xoff_detect__no_xoff 0 +#define R_SERIAL1_STATUS__xoff_detect__xoff 1 +#define R_SERIAL1_STATUS__cts___BITNR 6 +#define R_SERIAL1_STATUS__cts___WIDTH 1 +#define R_SERIAL1_STATUS__cts___active 0 +#define R_SERIAL1_STATUS__cts___inactive 1 +#define R_SERIAL1_STATUS__tr_ready__BITNR 5 +#define R_SERIAL1_STATUS__tr_ready__WIDTH 1 +#define R_SERIAL1_STATUS__tr_ready__full 0 +#define R_SERIAL1_STATUS__tr_ready__ready 1 +#define R_SERIAL1_STATUS__rxd__BITNR 4 +#define R_SERIAL1_STATUS__rxd__WIDTH 1 +#define R_SERIAL1_STATUS__overrun__BITNR 3 +#define R_SERIAL1_STATUS__overrun__WIDTH 1 +#define R_SERIAL1_STATUS__overrun__no 0 +#define R_SERIAL1_STATUS__overrun__yes 1 +#define R_SERIAL1_STATUS__par_err__BITNR 2 +#define R_SERIAL1_STATUS__par_err__WIDTH 1 +#define R_SERIAL1_STATUS__par_err__no 0 +#define R_SERIAL1_STATUS__par_err__yes 1 +#define R_SERIAL1_STATUS__framing_err__BITNR 1 +#define R_SERIAL1_STATUS__framing_err__WIDTH 1 +#define R_SERIAL1_STATUS__framing_err__no 0 +#define R_SERIAL1_STATUS__framing_err__yes 1 +#define R_SERIAL1_STATUS__data_avail__BITNR 0 +#define R_SERIAL1_STATUS__data_avail__WIDTH 1 +#define R_SERIAL1_STATUS__data_avail__no 0 +#define R_SERIAL1_STATUS__data_avail__yes 1 + +#define R_SERIAL1_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000068) +#define R_SERIAL1_REC_DATA__data_in__BITNR 0 +#define R_SERIAL1_REC_DATA__data_in__WIDTH 8 + +#define R_SERIAL1_XOFF (IO_TYPECAST_UDWORD 0xb000006c) +#define R_SERIAL1_XOFF__tx_stop__BITNR 9 +#define R_SERIAL1_XOFF__tx_stop__WIDTH 1 +#define R_SERIAL1_XOFF__tx_stop__enable 0 +#define R_SERIAL1_XOFF__tx_stop__stop 1 +#define R_SERIAL1_XOFF__auto_xoff__BITNR 8 +#define R_SERIAL1_XOFF__auto_xoff__WIDTH 1 +#define R_SERIAL1_XOFF__auto_xoff__disable 0 +#define R_SERIAL1_XOFF__auto_xoff__enable 1 +#define R_SERIAL1_XOFF__xoff_char__BITNR 0 +#define R_SERIAL1_XOFF__xoff_char__WIDTH 8 + +#define R_SERIAL2_CTRL (IO_TYPECAST_UDWORD 0xb0000070) +#define R_SERIAL2_CTRL__tr_baud__BITNR 28 +#define R_SERIAL2_CTRL__tr_baud__WIDTH 4 +#define R_SERIAL2_CTRL__tr_baud__c300Hz 0 +#define R_SERIAL2_CTRL__tr_baud__c600Hz 1 +#define R_SERIAL2_CTRL__tr_baud__c1200Hz 2 +#define R_SERIAL2_CTRL__tr_baud__c2400Hz 3 +#define R_SERIAL2_CTRL__tr_baud__c4800Hz 4 +#define R_SERIAL2_CTRL__tr_baud__c9600Hz 5 +#define R_SERIAL2_CTRL__tr_baud__c19k2Hz 6 +#define R_SERIAL2_CTRL__tr_baud__c38k4Hz 7 +#define R_SERIAL2_CTRL__tr_baud__c57k6Hz 8 +#define R_SERIAL2_CTRL__tr_baud__c115k2Hz 9 +#define R_SERIAL2_CTRL__tr_baud__c230k4Hz 10 +#define R_SERIAL2_CTRL__tr_baud__c460k8Hz 11 +#define R_SERIAL2_CTRL__tr_baud__c921k6Hz 12 +#define R_SERIAL2_CTRL__tr_baud__c1843k2Hz 13 +#define R_SERIAL2_CTRL__tr_baud__c6250kHz 14 +#define R_SERIAL2_CTRL__tr_baud__reserved 15 +#define R_SERIAL2_CTRL__rec_baud__BITNR 24 +#define R_SERIAL2_CTRL__rec_baud__WIDTH 4 +#define R_SERIAL2_CTRL__rec_baud__c300Hz 0 +#define R_SERIAL2_CTRL__rec_baud__c600Hz 1 +#define R_SERIAL2_CTRL__rec_baud__c1200Hz 2 +#define R_SERIAL2_CTRL__rec_baud__c2400Hz 3 +#define R_SERIAL2_CTRL__rec_baud__c4800Hz 4 +#define R_SERIAL2_CTRL__rec_baud__c9600Hz 5 +#define R_SERIAL2_CTRL__rec_baud__c19k2Hz 6 +#define R_SERIAL2_CTRL__rec_baud__c38k4Hz 7 +#define R_SERIAL2_CTRL__rec_baud__c57k6Hz 8 +#define R_SERIAL2_CTRL__rec_baud__c115k2Hz 9 +#define R_SERIAL2_CTRL__rec_baud__c230k4Hz 10 +#define R_SERIAL2_CTRL__rec_baud__c460k8Hz 11 +#define R_SERIAL2_CTRL__rec_baud__c921k6Hz 12 +#define R_SERIAL2_CTRL__rec_baud__c1843k2Hz 13 +#define R_SERIAL2_CTRL__rec_baud__c6250kHz 14 +#define R_SERIAL2_CTRL__rec_baud__reserved 15 +#define R_SERIAL2_CTRL__dma_err__BITNR 23 +#define R_SERIAL2_CTRL__dma_err__WIDTH 1 +#define R_SERIAL2_CTRL__dma_err__stop 0 +#define R_SERIAL2_CTRL__dma_err__ignore 1 +#define R_SERIAL2_CTRL__rec_enable__BITNR 22 +#define R_SERIAL2_CTRL__rec_enable__WIDTH 1 +#define R_SERIAL2_CTRL__rec_enable__disable 0 +#define R_SERIAL2_CTRL__rec_enable__enable 1 +#define R_SERIAL2_CTRL__rts___BITNR 21 +#define R_SERIAL2_CTRL__rts___WIDTH 1 +#define R_SERIAL2_CTRL__rts___active 0 +#define R_SERIAL2_CTRL__rts___inactive 1 +#define R_SERIAL2_CTRL__sampling__BITNR 20 +#define R_SERIAL2_CTRL__sampling__WIDTH 1 +#define R_SERIAL2_CTRL__sampling__middle 0 +#define R_SERIAL2_CTRL__sampling__majority 1 +#define R_SERIAL2_CTRL__rec_stick_par__BITNR 19 +#define R_SERIAL2_CTRL__rec_stick_par__WIDTH 1 +#define R_SERIAL2_CTRL__rec_stick_par__normal 0 +#define R_SERIAL2_CTRL__rec_stick_par__stick 1 +#define R_SERIAL2_CTRL__rec_par__BITNR 18 +#define R_SERIAL2_CTRL__rec_par__WIDTH 1 +#define R_SERIAL2_CTRL__rec_par__even 0 +#define R_SERIAL2_CTRL__rec_par__odd 1 +#define R_SERIAL2_CTRL__rec_par_en__BITNR 17 +#define R_SERIAL2_CTRL__rec_par_en__WIDTH 1 +#define R_SERIAL2_CTRL__rec_par_en__disable 0 +#define R_SERIAL2_CTRL__rec_par_en__enable 1 +#define R_SERIAL2_CTRL__rec_bitnr__BITNR 16 +#define R_SERIAL2_CTRL__rec_bitnr__WIDTH 1 +#define R_SERIAL2_CTRL__rec_bitnr__rec_8bit 0 +#define R_SERIAL2_CTRL__rec_bitnr__rec_7bit 1 +#define R_SERIAL2_CTRL__txd__BITNR 15 +#define R_SERIAL2_CTRL__txd__WIDTH 1 +#define R_SERIAL2_CTRL__tr_enable__BITNR 14 +#define R_SERIAL2_CTRL__tr_enable__WIDTH 1 +#define R_SERIAL2_CTRL__tr_enable__disable 0 +#define R_SERIAL2_CTRL__tr_enable__enable 1 +#define R_SERIAL2_CTRL__auto_cts__BITNR 13 +#define R_SERIAL2_CTRL__auto_cts__WIDTH 1 +#define R_SERIAL2_CTRL__auto_cts__disabled 0 +#define R_SERIAL2_CTRL__auto_cts__active 1 +#define R_SERIAL2_CTRL__stop_bits__BITNR 12 +#define R_SERIAL2_CTRL__stop_bits__WIDTH 1 +#define R_SERIAL2_CTRL__stop_bits__one_bit 0 +#define R_SERIAL2_CTRL__stop_bits__two_bits 1 +#define R_SERIAL2_CTRL__tr_stick_par__BITNR 11 +#define R_SERIAL2_CTRL__tr_stick_par__WIDTH 1 +#define R_SERIAL2_CTRL__tr_stick_par__normal 0 +#define R_SERIAL2_CTRL__tr_stick_par__stick 1 +#define R_SERIAL2_CTRL__tr_par__BITNR 10 +#define R_SERIAL2_CTRL__tr_par__WIDTH 1 +#define R_SERIAL2_CTRL__tr_par__even 0 +#define R_SERIAL2_CTRL__tr_par__odd 1 +#define R_SERIAL2_CTRL__tr_par_en__BITNR 9 +#define R_SERIAL2_CTRL__tr_par_en__WIDTH 1 +#define R_SERIAL2_CTRL__tr_par_en__disable 0 +#define R_SERIAL2_CTRL__tr_par_en__enable 1 +#define R_SERIAL2_CTRL__tr_bitnr__BITNR 8 +#define R_SERIAL2_CTRL__tr_bitnr__WIDTH 1 +#define R_SERIAL2_CTRL__tr_bitnr__tr_8bit 0 +#define R_SERIAL2_CTRL__tr_bitnr__tr_7bit 1 +#define R_SERIAL2_CTRL__data_out__BITNR 0 +#define R_SERIAL2_CTRL__data_out__WIDTH 8 + +#define R_SERIAL2_BAUD (IO_TYPECAST_BYTE 0xb0000073) +#define R_SERIAL2_BAUD__tr_baud__BITNR 4 +#define R_SERIAL2_BAUD__tr_baud__WIDTH 4 +#define R_SERIAL2_BAUD__tr_baud__c300Hz 0 +#define R_SERIAL2_BAUD__tr_baud__c600Hz 1 +#define R_SERIAL2_BAUD__tr_baud__c1200Hz 2 +#define R_SERIAL2_BAUD__tr_baud__c2400Hz 3 +#define R_SERIAL2_BAUD__tr_baud__c4800Hz 4 +#define R_SERIAL2_BAUD__tr_baud__c9600Hz 5 +#define R_SERIAL2_BAUD__tr_baud__c19k2Hz 6 +#define R_SERIAL2_BAUD__tr_baud__c38k4Hz 7 +#define R_SERIAL2_BAUD__tr_baud__c57k6Hz 8 +#define R_SERIAL2_BAUD__tr_baud__c115k2Hz 9 +#define R_SERIAL2_BAUD__tr_baud__c230k4Hz 10 +#define R_SERIAL2_BAUD__tr_baud__c460k8Hz 11 +#define R_SERIAL2_BAUD__tr_baud__c921k6Hz 12 +#define R_SERIAL2_BAUD__tr_baud__c1843k2Hz 13 +#define R_SERIAL2_BAUD__tr_baud__c6250kHz 14 +#define R_SERIAL2_BAUD__tr_baud__reserved 15 +#define R_SERIAL2_BAUD__rec_baud__BITNR 0 +#define R_SERIAL2_BAUD__rec_baud__WIDTH 4 +#define R_SERIAL2_BAUD__rec_baud__c300Hz 0 +#define R_SERIAL2_BAUD__rec_baud__c600Hz 1 +#define R_SERIAL2_BAUD__rec_baud__c1200Hz 2 +#define R_SERIAL2_BAUD__rec_baud__c2400Hz 3 +#define R_SERIAL2_BAUD__rec_baud__c4800Hz 4 +#define R_SERIAL2_BAUD__rec_baud__c9600Hz 5 +#define R_SERIAL2_BAUD__rec_baud__c19k2Hz 6 +#define R_SERIAL2_BAUD__rec_baud__c38k4Hz 7 +#define R_SERIAL2_BAUD__rec_baud__c57k6Hz 8 +#define R_SERIAL2_BAUD__rec_baud__c115k2Hz 9 +#define R_SERIAL2_BAUD__rec_baud__c230k4Hz 10 +#define R_SERIAL2_BAUD__rec_baud__c460k8Hz 11 +#define R_SERIAL2_BAUD__rec_baud__c921k6Hz 12 +#define R_SERIAL2_BAUD__rec_baud__c1843k2Hz 13 +#define R_SERIAL2_BAUD__rec_baud__c6250kHz 14 +#define R_SERIAL2_BAUD__rec_baud__reserved 15 + +#define R_SERIAL2_REC_CTRL (IO_TYPECAST_BYTE 0xb0000072) +#define R_SERIAL2_REC_CTRL__dma_err__BITNR 7 +#define R_SERIAL2_REC_CTRL__dma_err__WIDTH 1 +#define R_SERIAL2_REC_CTRL__dma_err__stop 0 +#define R_SERIAL2_REC_CTRL__dma_err__ignore 1 +#define R_SERIAL2_REC_CTRL__rec_enable__BITNR 6 +#define R_SERIAL2_REC_CTRL__rec_enable__WIDTH 1 +#define R_SERIAL2_REC_CTRL__rec_enable__disable 0 +#define R_SERIAL2_REC_CTRL__rec_enable__enable 1 +#define R_SERIAL2_REC_CTRL__rts___BITNR 5 +#define R_SERIAL2_REC_CTRL__rts___WIDTH 1 +#define R_SERIAL2_REC_CTRL__rts___active 0 +#define R_SERIAL2_REC_CTRL__rts___inactive 1 +#define R_SERIAL2_REC_CTRL__sampling__BITNR 4 +#define R_SERIAL2_REC_CTRL__sampling__WIDTH 1 +#define R_SERIAL2_REC_CTRL__sampling__middle 0 +#define R_SERIAL2_REC_CTRL__sampling__majority 1 +#define R_SERIAL2_REC_CTRL__rec_stick_par__BITNR 3 +#define R_SERIAL2_REC_CTRL__rec_stick_par__WIDTH 1 +#define R_SERIAL2_REC_CTRL__rec_stick_par__normal 0 +#define R_SERIAL2_REC_CTRL__rec_stick_par__stick 1 +#define R_SERIAL2_REC_CTRL__rec_par__BITNR 2 +#define R_SERIAL2_REC_CTRL__rec_par__WIDTH 1 +#define R_SERIAL2_REC_CTRL__rec_par__even 0 +#define R_SERIAL2_REC_CTRL__rec_par__odd 1 +#define R_SERIAL2_REC_CTRL__rec_par_en__BITNR 1 +#define R_SERIAL2_REC_CTRL__rec_par_en__WIDTH 1 +#define R_SERIAL2_REC_CTRL__rec_par_en__disable 0 +#define R_SERIAL2_REC_CTRL__rec_par_en__enable 1 +#define R_SERIAL2_REC_CTRL__rec_bitnr__BITNR 0 +#define R_SERIAL2_REC_CTRL__rec_bitnr__WIDTH 1 +#define R_SERIAL2_REC_CTRL__rec_bitnr__rec_8bit 0 +#define R_SERIAL2_REC_CTRL__rec_bitnr__rec_7bit 1 + +#define R_SERIAL2_TR_CTRL (IO_TYPECAST_BYTE 0xb0000071) +#define R_SERIAL2_TR_CTRL__txd__BITNR 7 +#define R_SERIAL2_TR_CTRL__txd__WIDTH 1 +#define R_SERIAL2_TR_CTRL__tr_enable__BITNR 6 +#define R_SERIAL2_TR_CTRL__tr_enable__WIDTH 1 +#define R_SERIAL2_TR_CTRL__tr_enable__disable 0 +#define R_SERIAL2_TR_CTRL__tr_enable__enable 1 +#define R_SERIAL2_TR_CTRL__auto_cts__BITNR 5 +#define R_SERIAL2_TR_CTRL__auto_cts__WIDTH 1 +#define R_SERIAL2_TR_CTRL__auto_cts__disabled 0 +#define R_SERIAL2_TR_CTRL__auto_cts__active 1 +#define R_SERIAL2_TR_CTRL__stop_bits__BITNR 4 +#define R_SERIAL2_TR_CTRL__stop_bits__WIDTH 1 +#define R_SERIAL2_TR_CTRL__stop_bits__one_bit 0 +#define R_SERIAL2_TR_CTRL__stop_bits__two_bits 1 +#define R_SERIAL2_TR_CTRL__tr_stick_par__BITNR 3 +#define R_SERIAL2_TR_CTRL__tr_stick_par__WIDTH 1 +#define R_SERIAL2_TR_CTRL__tr_stick_par__normal 0 +#define R_SERIAL2_TR_CTRL__tr_stick_par__stick 1 +#define R_SERIAL2_TR_CTRL__tr_par__BITNR 2 +#define R_SERIAL2_TR_CTRL__tr_par__WIDTH 1 +#define R_SERIAL2_TR_CTRL__tr_par__even 0 +#define R_SERIAL2_TR_CTRL__tr_par__odd 1 +#define R_SERIAL2_TR_CTRL__tr_par_en__BITNR 1 +#define R_SERIAL2_TR_CTRL__tr_par_en__WIDTH 1 +#define R_SERIAL2_TR_CTRL__tr_par_en__disable 0 +#define R_SERIAL2_TR_CTRL__tr_par_en__enable 1 +#define R_SERIAL2_TR_CTRL__tr_bitnr__BITNR 0 +#define R_SERIAL2_TR_CTRL__tr_bitnr__WIDTH 1 +#define R_SERIAL2_TR_CTRL__tr_bitnr__tr_8bit 0 +#define R_SERIAL2_TR_CTRL__tr_bitnr__tr_7bit 1 + +#define R_SERIAL2_TR_DATA (IO_TYPECAST_BYTE 0xb0000070) +#define R_SERIAL2_TR_DATA__data_out__BITNR 0 +#define R_SERIAL2_TR_DATA__data_out__WIDTH 8 + +#define R_SERIAL2_READ (IO_TYPECAST_RO_UDWORD 0xb0000070) +#define R_SERIAL2_READ__xoff_detect__BITNR 15 +#define R_SERIAL2_READ__xoff_detect__WIDTH 1 +#define R_SERIAL2_READ__xoff_detect__no_xoff 0 +#define R_SERIAL2_READ__xoff_detect__xoff 1 +#define R_SERIAL2_READ__cts___BITNR 14 +#define R_SERIAL2_READ__cts___WIDTH 1 +#define R_SERIAL2_READ__cts___active 0 +#define R_SERIAL2_READ__cts___inactive 1 +#define R_SERIAL2_READ__tr_ready__BITNR 13 +#define R_SERIAL2_READ__tr_ready__WIDTH 1 +#define R_SERIAL2_READ__tr_ready__full 0 +#define R_SERIAL2_READ__tr_ready__ready 1 +#define R_SERIAL2_READ__rxd__BITNR 12 +#define R_SERIAL2_READ__rxd__WIDTH 1 +#define R_SERIAL2_READ__overrun__BITNR 11 +#define R_SERIAL2_READ__overrun__WIDTH 1 +#define R_SERIAL2_READ__overrun__no 0 +#define R_SERIAL2_READ__overrun__yes 1 +#define R_SERIAL2_READ__par_err__BITNR 10 +#define R_SERIAL2_READ__par_err__WIDTH 1 +#define R_SERIAL2_READ__par_err__no 0 +#define R_SERIAL2_READ__par_err__yes 1 +#define R_SERIAL2_READ__framing_err__BITNR 9 +#define R_SERIAL2_READ__framing_err__WIDTH 1 +#define R_SERIAL2_READ__framing_err__no 0 +#define R_SERIAL2_READ__framing_err__yes 1 +#define R_SERIAL2_READ__data_avail__BITNR 8 +#define R_SERIAL2_READ__data_avail__WIDTH 1 +#define R_SERIAL2_READ__data_avail__no 0 +#define R_SERIAL2_READ__data_avail__yes 1 +#define R_SERIAL2_READ__data_in__BITNR 0 +#define R_SERIAL2_READ__data_in__WIDTH 8 + +#define R_SERIAL2_STATUS (IO_TYPECAST_RO_BYTE 0xb0000071) +#define R_SERIAL2_STATUS__xoff_detect__BITNR 7 +#define R_SERIAL2_STATUS__xoff_detect__WIDTH 1 +#define R_SERIAL2_STATUS__xoff_detect__no_xoff 0 +#define R_SERIAL2_STATUS__xoff_detect__xoff 1 +#define R_SERIAL2_STATUS__cts___BITNR 6 +#define R_SERIAL2_STATUS__cts___WIDTH 1 +#define R_SERIAL2_STATUS__cts___active 0 +#define R_SERIAL2_STATUS__cts___inactive 1 +#define R_SERIAL2_STATUS__tr_ready__BITNR 5 +#define R_SERIAL2_STATUS__tr_ready__WIDTH 1 +#define R_SERIAL2_STATUS__tr_ready__full 0 +#define R_SERIAL2_STATUS__tr_ready__ready 1 +#define R_SERIAL2_STATUS__rxd__BITNR 4 +#define R_SERIAL2_STATUS__rxd__WIDTH 1 +#define R_SERIAL2_STATUS__overrun__BITNR 3 +#define R_SERIAL2_STATUS__overrun__WIDTH 1 +#define R_SERIAL2_STATUS__overrun__no 0 +#define R_SERIAL2_STATUS__overrun__yes 1 +#define R_SERIAL2_STATUS__par_err__BITNR 2 +#define R_SERIAL2_STATUS__par_err__WIDTH 1 +#define R_SERIAL2_STATUS__par_err__no 0 +#define R_SERIAL2_STATUS__par_err__yes 1 +#define R_SERIAL2_STATUS__framing_err__BITNR 1 +#define R_SERIAL2_STATUS__framing_err__WIDTH 1 +#define R_SERIAL2_STATUS__framing_err__no 0 +#define R_SERIAL2_STATUS__framing_err__yes 1 +#define R_SERIAL2_STATUS__data_avail__BITNR 0 +#define R_SERIAL2_STATUS__data_avail__WIDTH 1 +#define R_SERIAL2_STATUS__data_avail__no 0 +#define R_SERIAL2_STATUS__data_avail__yes 1 + +#define R_SERIAL2_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000070) +#define R_SERIAL2_REC_DATA__data_in__BITNR 0 +#define R_SERIAL2_REC_DATA__data_in__WIDTH 8 + +#define R_SERIAL2_XOFF (IO_TYPECAST_UDWORD 0xb0000074) +#define R_SERIAL2_XOFF__tx_stop__BITNR 9 +#define R_SERIAL2_XOFF__tx_stop__WIDTH 1 +#define R_SERIAL2_XOFF__tx_stop__enable 0 +#define R_SERIAL2_XOFF__tx_stop__stop 1 +#define R_SERIAL2_XOFF__auto_xoff__BITNR 8 +#define R_SERIAL2_XOFF__auto_xoff__WIDTH 1 +#define R_SERIAL2_XOFF__auto_xoff__disable 0 +#define R_SERIAL2_XOFF__auto_xoff__enable 1 +#define R_SERIAL2_XOFF__xoff_char__BITNR 0 +#define R_SERIAL2_XOFF__xoff_char__WIDTH 8 + +#define R_SERIAL3_CTRL (IO_TYPECAST_UDWORD 0xb0000078) +#define R_SERIAL3_CTRL__tr_baud__BITNR 28 +#define R_SERIAL3_CTRL__tr_baud__WIDTH 4 +#define R_SERIAL3_CTRL__tr_baud__c300Hz 0 +#define R_SERIAL3_CTRL__tr_baud__c600Hz 1 +#define R_SERIAL3_CTRL__tr_baud__c1200Hz 2 +#define R_SERIAL3_CTRL__tr_baud__c2400Hz 3 +#define R_SERIAL3_CTRL__tr_baud__c4800Hz 4 +#define R_SERIAL3_CTRL__tr_baud__c9600Hz 5 +#define R_SERIAL3_CTRL__tr_baud__c19k2Hz 6 +#define R_SERIAL3_CTRL__tr_baud__c38k4Hz 7 +#define R_SERIAL3_CTRL__tr_baud__c57k6Hz 8 +#define R_SERIAL3_CTRL__tr_baud__c115k2Hz 9 +#define R_SERIAL3_CTRL__tr_baud__c230k4Hz 10 +#define R_SERIAL3_CTRL__tr_baud__c460k8Hz 11 +#define R_SERIAL3_CTRL__tr_baud__c921k6Hz 12 +#define R_SERIAL3_CTRL__tr_baud__c1843k2Hz 13 +#define R_SERIAL3_CTRL__tr_baud__c6250kHz 14 +#define R_SERIAL3_CTRL__tr_baud__reserved 15 +#define R_SERIAL3_CTRL__rec_baud__BITNR 24 +#define R_SERIAL3_CTRL__rec_baud__WIDTH 4 +#define R_SERIAL3_CTRL__rec_baud__c300Hz 0 +#define R_SERIAL3_CTRL__rec_baud__c600Hz 1 +#define R_SERIAL3_CTRL__rec_baud__c1200Hz 2 +#define R_SERIAL3_CTRL__rec_baud__c2400Hz 3 +#define R_SERIAL3_CTRL__rec_baud__c4800Hz 4 +#define R_SERIAL3_CTRL__rec_baud__c9600Hz 5 +#define R_SERIAL3_CTRL__rec_baud__c19k2Hz 6 +#define R_SERIAL3_CTRL__rec_baud__c38k4Hz 7 +#define R_SERIAL3_CTRL__rec_baud__c57k6Hz 8 +#define R_SERIAL3_CTRL__rec_baud__c115k2Hz 9 +#define R_SERIAL3_CTRL__rec_baud__c230k4Hz 10 +#define R_SERIAL3_CTRL__rec_baud__c460k8Hz 11 +#define R_SERIAL3_CTRL__rec_baud__c921k6Hz 12 +#define R_SERIAL3_CTRL__rec_baud__c1843k2Hz 13 +#define R_SERIAL3_CTRL__rec_baud__c6250kHz 14 +#define R_SERIAL3_CTRL__rec_baud__reserved 15 +#define R_SERIAL3_CTRL__dma_err__BITNR 23 +#define R_SERIAL3_CTRL__dma_err__WIDTH 1 +#define R_SERIAL3_CTRL__dma_err__stop 0 +#define R_SERIAL3_CTRL__dma_err__ignore 1 +#define R_SERIAL3_CTRL__rec_enable__BITNR 22 +#define R_SERIAL3_CTRL__rec_enable__WIDTH 1 +#define R_SERIAL3_CTRL__rec_enable__disable 0 +#define R_SERIAL3_CTRL__rec_enable__enable 1 +#define R_SERIAL3_CTRL__rts___BITNR 21 +#define R_SERIAL3_CTRL__rts___WIDTH 1 +#define R_SERIAL3_CTRL__rts___active 0 +#define R_SERIAL3_CTRL__rts___inactive 1 +#define R_SERIAL3_CTRL__sampling__BITNR 20 +#define R_SERIAL3_CTRL__sampling__WIDTH 1 +#define R_SERIAL3_CTRL__sampling__middle 0 +#define R_SERIAL3_CTRL__sampling__majority 1 +#define R_SERIAL3_CTRL__rec_stick_par__BITNR 19 +#define R_SERIAL3_CTRL__rec_stick_par__WIDTH 1 +#define R_SERIAL3_CTRL__rec_stick_par__normal 0 +#define R_SERIAL3_CTRL__rec_stick_par__stick 1 +#define R_SERIAL3_CTRL__rec_par__BITNR 18 +#define R_SERIAL3_CTRL__rec_par__WIDTH 1 +#define R_SERIAL3_CTRL__rec_par__even 0 +#define R_SERIAL3_CTRL__rec_par__odd 1 +#define R_SERIAL3_CTRL__rec_par_en__BITNR 17 +#define R_SERIAL3_CTRL__rec_par_en__WIDTH 1 +#define R_SERIAL3_CTRL__rec_par_en__disable 0 +#define R_SERIAL3_CTRL__rec_par_en__enable 1 +#define R_SERIAL3_CTRL__rec_bitnr__BITNR 16 +#define R_SERIAL3_CTRL__rec_bitnr__WIDTH 1 +#define R_SERIAL3_CTRL__rec_bitnr__rec_8bit 0 +#define R_SERIAL3_CTRL__rec_bitnr__rec_7bit 1 +#define R_SERIAL3_CTRL__txd__BITNR 15 +#define R_SERIAL3_CTRL__txd__WIDTH 1 +#define R_SERIAL3_CTRL__tr_enable__BITNR 14 +#define R_SERIAL3_CTRL__tr_enable__WIDTH 1 +#define R_SERIAL3_CTRL__tr_enable__disable 0 +#define R_SERIAL3_CTRL__tr_enable__enable 1 +#define R_SERIAL3_CTRL__auto_cts__BITNR 13 +#define R_SERIAL3_CTRL__auto_cts__WIDTH 1 +#define R_SERIAL3_CTRL__auto_cts__disabled 0 +#define R_SERIAL3_CTRL__auto_cts__active 1 +#define R_SERIAL3_CTRL__stop_bits__BITNR 12 +#define R_SERIAL3_CTRL__stop_bits__WIDTH 1 +#define R_SERIAL3_CTRL__stop_bits__one_bit 0 +#define R_SERIAL3_CTRL__stop_bits__two_bits 1 +#define R_SERIAL3_CTRL__tr_stick_par__BITNR 11 +#define R_SERIAL3_CTRL__tr_stick_par__WIDTH 1 +#define R_SERIAL3_CTRL__tr_stick_par__normal 0 +#define R_SERIAL3_CTRL__tr_stick_par__stick 1 +#define R_SERIAL3_CTRL__tr_par__BITNR 10 +#define R_SERIAL3_CTRL__tr_par__WIDTH 1 +#define R_SERIAL3_CTRL__tr_par__even 0 +#define R_SERIAL3_CTRL__tr_par__odd 1 +#define R_SERIAL3_CTRL__tr_par_en__BITNR 9 +#define R_SERIAL3_CTRL__tr_par_en__WIDTH 1 +#define R_SERIAL3_CTRL__tr_par_en__disable 0 +#define R_SERIAL3_CTRL__tr_par_en__enable 1 +#define R_SERIAL3_CTRL__tr_bitnr__BITNR 8 +#define R_SERIAL3_CTRL__tr_bitnr__WIDTH 1 +#define R_SERIAL3_CTRL__tr_bitnr__tr_8bit 0 +#define R_SERIAL3_CTRL__tr_bitnr__tr_7bit 1 +#define R_SERIAL3_CTRL__data_out__BITNR 0 +#define R_SERIAL3_CTRL__data_out__WIDTH 8 + +#define R_SERIAL3_BAUD (IO_TYPECAST_BYTE 0xb000007b) +#define R_SERIAL3_BAUD__tr_baud__BITNR 4 +#define R_SERIAL3_BAUD__tr_baud__WIDTH 4 +#define R_SERIAL3_BAUD__tr_baud__c300Hz 0 +#define R_SERIAL3_BAUD__tr_baud__c600Hz 1 +#define R_SERIAL3_BAUD__tr_baud__c1200Hz 2 +#define R_SERIAL3_BAUD__tr_baud__c2400Hz 3 +#define R_SERIAL3_BAUD__tr_baud__c4800Hz 4 +#define R_SERIAL3_BAUD__tr_baud__c9600Hz 5 +#define R_SERIAL3_BAUD__tr_baud__c19k2Hz 6 +#define R_SERIAL3_BAUD__tr_baud__c38k4Hz 7 +#define R_SERIAL3_BAUD__tr_baud__c57k6Hz 8 +#define R_SERIAL3_BAUD__tr_baud__c115k2Hz 9 +#define R_SERIAL3_BAUD__tr_baud__c230k4Hz 10 +#define R_SERIAL3_BAUD__tr_baud__c460k8Hz 11 +#define R_SERIAL3_BAUD__tr_baud__c921k6Hz 12 +#define R_SERIAL3_BAUD__tr_baud__c1843k2Hz 13 +#define R_SERIAL3_BAUD__tr_baud__c6250kHz 14 +#define R_SERIAL3_BAUD__tr_baud__reserved 15 +#define R_SERIAL3_BAUD__rec_baud__BITNR 0 +#define R_SERIAL3_BAUD__rec_baud__WIDTH 4 +#define R_SERIAL3_BAUD__rec_baud__c300Hz 0 +#define R_SERIAL3_BAUD__rec_baud__c600Hz 1 +#define R_SERIAL3_BAUD__rec_baud__c1200Hz 2 +#define R_SERIAL3_BAUD__rec_baud__c2400Hz 3 +#define R_SERIAL3_BAUD__rec_baud__c4800Hz 4 +#define R_SERIAL3_BAUD__rec_baud__c9600Hz 5 +#define R_SERIAL3_BAUD__rec_baud__c19k2Hz 6 +#define R_SERIAL3_BAUD__rec_baud__c38k4Hz 7 +#define R_SERIAL3_BAUD__rec_baud__c57k6Hz 8 +#define R_SERIAL3_BAUD__rec_baud__c115k2Hz 9 +#define R_SERIAL3_BAUD__rec_baud__c230k4Hz 10 +#define R_SERIAL3_BAUD__rec_baud__c460k8Hz 11 +#define R_SERIAL3_BAUD__rec_baud__c921k6Hz 12 +#define R_SERIAL3_BAUD__rec_baud__c1843k2Hz 13 +#define R_SERIAL3_BAUD__rec_baud__c6250kHz 14 +#define R_SERIAL3_BAUD__rec_baud__reserved 15 + +#define R_SERIAL3_REC_CTRL (IO_TYPECAST_BYTE 0xb000007a) +#define R_SERIAL3_REC_CTRL__dma_err__BITNR 7 +#define R_SERIAL3_REC_CTRL__dma_err__WIDTH 1 +#define R_SERIAL3_REC_CTRL__dma_err__stop 0 +#define R_SERIAL3_REC_CTRL__dma_err__ignore 1 +#define R_SERIAL3_REC_CTRL__rec_enable__BITNR 6 +#define R_SERIAL3_REC_CTRL__rec_enable__WIDTH 1 +#define R_SERIAL3_REC_CTRL__rec_enable__disable 0 +#define R_SERIAL3_REC_CTRL__rec_enable__enable 1 +#define R_SERIAL3_REC_CTRL__rts___BITNR 5 +#define R_SERIAL3_REC_CTRL__rts___WIDTH 1 +#define R_SERIAL3_REC_CTRL__rts___active 0 +#define R_SERIAL3_REC_CTRL__rts___inactive 1 +#define R_SERIAL3_REC_CTRL__sampling__BITNR 4 +#define R_SERIAL3_REC_CTRL__sampling__WIDTH 1 +#define R_SERIAL3_REC_CTRL__sampling__middle 0 +#define R_SERIAL3_REC_CTRL__sampling__majority 1 +#define R_SERIAL3_REC_CTRL__rec_stick_par__BITNR 3 +#define R_SERIAL3_REC_CTRL__rec_stick_par__WIDTH 1 +#define R_SERIAL3_REC_CTRL__rec_stick_par__normal 0 +#define R_SERIAL3_REC_CTRL__rec_stick_par__stick 1 +#define R_SERIAL3_REC_CTRL__rec_par__BITNR 2 +#define R_SERIAL3_REC_CTRL__rec_par__WIDTH 1 +#define R_SERIAL3_REC_CTRL__rec_par__even 0 +#define R_SERIAL3_REC_CTRL__rec_par__odd 1 +#define R_SERIAL3_REC_CTRL__rec_par_en__BITNR 1 +#define R_SERIAL3_REC_CTRL__rec_par_en__WIDTH 1 +#define R_SERIAL3_REC_CTRL__rec_par_en__disable 0 +#define R_SERIAL3_REC_CTRL__rec_par_en__enable 1 +#define R_SERIAL3_REC_CTRL__rec_bitnr__BITNR 0 +#define R_SERIAL3_REC_CTRL__rec_bitnr__WIDTH 1 +#define R_SERIAL3_REC_CTRL__rec_bitnr__rec_8bit 0 +#define R_SERIAL3_REC_CTRL__rec_bitnr__rec_7bit 1 + +#define R_SERIAL3_TR_CTRL (IO_TYPECAST_BYTE 0xb0000079) +#define R_SERIAL3_TR_CTRL__txd__BITNR 7 +#define R_SERIAL3_TR_CTRL__txd__WIDTH 1 +#define R_SERIAL3_TR_CTRL__tr_enable__BITNR 6 +#define R_SERIAL3_TR_CTRL__tr_enable__WIDTH 1 +#define R_SERIAL3_TR_CTRL__tr_enable__disable 0 +#define R_SERIAL3_TR_CTRL__tr_enable__enable 1 +#define R_SERIAL3_TR_CTRL__auto_cts__BITNR 5 +#define R_SERIAL3_TR_CTRL__auto_cts__WIDTH 1 +#define R_SERIAL3_TR_CTRL__auto_cts__disabled 0 +#define R_SERIAL3_TR_CTRL__auto_cts__active 1 +#define R_SERIAL3_TR_CTRL__stop_bits__BITNR 4 +#define R_SERIAL3_TR_CTRL__stop_bits__WIDTH 1 +#define R_SERIAL3_TR_CTRL__stop_bits__one_bit 0 +#define R_SERIAL3_TR_CTRL__stop_bits__two_bits 1 +#define R_SERIAL3_TR_CTRL__tr_stick_par__BITNR 3 +#define R_SERIAL3_TR_CTRL__tr_stick_par__WIDTH 1 +#define R_SERIAL3_TR_CTRL__tr_stick_par__normal 0 +#define R_SERIAL3_TR_CTRL__tr_stick_par__stick 1 +#define R_SERIAL3_TR_CTRL__tr_par__BITNR 2 +#define R_SERIAL3_TR_CTRL__tr_par__WIDTH 1 +#define R_SERIAL3_TR_CTRL__tr_par__even 0 +#define R_SERIAL3_TR_CTRL__tr_par__odd 1 +#define R_SERIAL3_TR_CTRL__tr_par_en__BITNR 1 +#define R_SERIAL3_TR_CTRL__tr_par_en__WIDTH 1 +#define R_SERIAL3_TR_CTRL__tr_par_en__disable 0 +#define R_SERIAL3_TR_CTRL__tr_par_en__enable 1 +#define R_SERIAL3_TR_CTRL__tr_bitnr__BITNR 0 +#define R_SERIAL3_TR_CTRL__tr_bitnr__WIDTH 1 +#define R_SERIAL3_TR_CTRL__tr_bitnr__tr_8bit 0 +#define R_SERIAL3_TR_CTRL__tr_bitnr__tr_7bit 1 + +#define R_SERIAL3_TR_DATA (IO_TYPECAST_BYTE 0xb0000078) +#define R_SERIAL3_TR_DATA__data_out__BITNR 0 +#define R_SERIAL3_TR_DATA__data_out__WIDTH 8 + +#define R_SERIAL3_READ (IO_TYPECAST_RO_UDWORD 0xb0000078) +#define R_SERIAL3_READ__xoff_detect__BITNR 15 +#define R_SERIAL3_READ__xoff_detect__WIDTH 1 +#define R_SERIAL3_READ__xoff_detect__no_xoff 0 +#define R_SERIAL3_READ__xoff_detect__xoff 1 +#define R_SERIAL3_READ__cts___BITNR 14 +#define R_SERIAL3_READ__cts___WIDTH 1 +#define R_SERIAL3_READ__cts___active 0 +#define R_SERIAL3_READ__cts___inactive 1 +#define R_SERIAL3_READ__tr_ready__BITNR 13 +#define R_SERIAL3_READ__tr_ready__WIDTH 1 +#define R_SERIAL3_READ__tr_ready__full 0 +#define R_SERIAL3_READ__tr_ready__ready 1 +#define R_SERIAL3_READ__rxd__BITNR 12 +#define R_SERIAL3_READ__rxd__WIDTH 1 +#define R_SERIAL3_READ__overrun__BITNR 11 +#define R_SERIAL3_READ__overrun__WIDTH 1 +#define R_SERIAL3_READ__overrun__no 0 +#define R_SERIAL3_READ__overrun__yes 1 +#define R_SERIAL3_READ__par_err__BITNR 10 +#define R_SERIAL3_READ__par_err__WIDTH 1 +#define R_SERIAL3_READ__par_err__no 0 +#define R_SERIAL3_READ__par_err__yes 1 +#define R_SERIAL3_READ__framing_err__BITNR 9 +#define R_SERIAL3_READ__framing_err__WIDTH 1 +#define R_SERIAL3_READ__framing_err__no 0 +#define R_SERIAL3_READ__framing_err__yes 1 +#define R_SERIAL3_READ__data_avail__BITNR 8 +#define R_SERIAL3_READ__data_avail__WIDTH 1 +#define R_SERIAL3_READ__data_avail__no 0 +#define R_SERIAL3_READ__data_avail__yes 1 +#define R_SERIAL3_READ__data_in__BITNR 0 +#define R_SERIAL3_READ__data_in__WIDTH 8 + +#define R_SERIAL3_STATUS (IO_TYPECAST_RO_BYTE 0xb0000079) +#define R_SERIAL3_STATUS__xoff_detect__BITNR 7 +#define R_SERIAL3_STATUS__xoff_detect__WIDTH 1 +#define R_SERIAL3_STATUS__xoff_detect__no_xoff 0 +#define R_SERIAL3_STATUS__xoff_detect__xoff 1 +#define R_SERIAL3_STATUS__cts___BITNR 6 +#define R_SERIAL3_STATUS__cts___WIDTH 1 +#define R_SERIAL3_STATUS__cts___active 0 +#define R_SERIAL3_STATUS__cts___inactive 1 +#define R_SERIAL3_STATUS__tr_ready__BITNR 5 +#define R_SERIAL3_STATUS__tr_ready__WIDTH 1 +#define R_SERIAL3_STATUS__tr_ready__full 0 +#define R_SERIAL3_STATUS__tr_ready__ready 1 +#define R_SERIAL3_STATUS__rxd__BITNR 4 +#define R_SERIAL3_STATUS__rxd__WIDTH 1 +#define R_SERIAL3_STATUS__overrun__BITNR 3 +#define R_SERIAL3_STATUS__overrun__WIDTH 1 +#define R_SERIAL3_STATUS__overrun__no 0 +#define R_SERIAL3_STATUS__overrun__yes 1 +#define R_SERIAL3_STATUS__par_err__BITNR 2 +#define R_SERIAL3_STATUS__par_err__WIDTH 1 +#define R_SERIAL3_STATUS__par_err__no 0 +#define R_SERIAL3_STATUS__par_err__yes 1 +#define R_SERIAL3_STATUS__framing_err__BITNR 1 +#define R_SERIAL3_STATUS__framing_err__WIDTH 1 +#define R_SERIAL3_STATUS__framing_err__no 0 +#define R_SERIAL3_STATUS__framing_err__yes 1 +#define R_SERIAL3_STATUS__data_avail__BITNR 0 +#define R_SERIAL3_STATUS__data_avail__WIDTH 1 +#define R_SERIAL3_STATUS__data_avail__no 0 +#define R_SERIAL3_STATUS__data_avail__yes 1 + +#define R_SERIAL3_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000078) +#define R_SERIAL3_REC_DATA__data_in__BITNR 0 +#define R_SERIAL3_REC_DATA__data_in__WIDTH 8 + +#define R_SERIAL3_XOFF (IO_TYPECAST_UDWORD 0xb000007c) +#define R_SERIAL3_XOFF__tx_stop__BITNR 9 +#define R_SERIAL3_XOFF__tx_stop__WIDTH 1 +#define R_SERIAL3_XOFF__tx_stop__enable 0 +#define R_SERIAL3_XOFF__tx_stop__stop 1 +#define R_SERIAL3_XOFF__auto_xoff__BITNR 8 +#define R_SERIAL3_XOFF__auto_xoff__WIDTH 1 +#define R_SERIAL3_XOFF__auto_xoff__disable 0 +#define R_SERIAL3_XOFF__auto_xoff__enable 1 +#define R_SERIAL3_XOFF__xoff_char__BITNR 0 +#define R_SERIAL3_XOFF__xoff_char__WIDTH 8 + +#define R_ALT_SER_BAUDRATE (IO_TYPECAST_UDWORD 0xb000005c) +#define R_ALT_SER_BAUDRATE__ser3_tr__BITNR 28 +#define R_ALT_SER_BAUDRATE__ser3_tr__WIDTH 2 +#define R_ALT_SER_BAUDRATE__ser3_tr__normal 0 +#define R_ALT_SER_BAUDRATE__ser3_tr__prescale 1 +#define R_ALT_SER_BAUDRATE__ser3_tr__extern 2 +#define R_ALT_SER_BAUDRATE__ser3_tr__timer 3 +#define R_ALT_SER_BAUDRATE__ser3_rec__BITNR 24 +#define R_ALT_SER_BAUDRATE__ser3_rec__WIDTH 2 +#define R_ALT_SER_BAUDRATE__ser3_rec__normal 0 +#define R_ALT_SER_BAUDRATE__ser3_rec__prescale 1 +#define R_ALT_SER_BAUDRATE__ser3_rec__extern 2 +#define R_ALT_SER_BAUDRATE__ser3_rec__timer 3 +#define R_ALT_SER_BAUDRATE__ser2_tr__BITNR 20 +#define R_ALT_SER_BAUDRATE__ser2_tr__WIDTH 2 +#define R_ALT_SER_BAUDRATE__ser2_tr__normal 0 +#define R_ALT_SER_BAUDRATE__ser2_tr__prescale 1 +#define R_ALT_SER_BAUDRATE__ser2_tr__extern 2 +#define R_ALT_SER_BAUDRATE__ser2_tr__timer 3 +#define R_ALT_SER_BAUDRATE__ser2_rec__BITNR 16 +#define R_ALT_SER_BAUDRATE__ser2_rec__WIDTH 2 +#define R_ALT_SER_BAUDRATE__ser2_rec__normal 0 +#define R_ALT_SER_BAUDRATE__ser2_rec__prescale 1 +#define R_ALT_SER_BAUDRATE__ser2_rec__extern 2 +#define R_ALT_SER_BAUDRATE__ser2_rec__timer 3 +#define R_ALT_SER_BAUDRATE__ser1_tr__BITNR 12 +#define R_ALT_SER_BAUDRATE__ser1_tr__WIDTH 2 +#define R_ALT_SER_BAUDRATE__ser1_tr__normal 0 +#define R_ALT_SER_BAUDRATE__ser1_tr__prescale 1 +#define R_ALT_SER_BAUDRATE__ser1_tr__extern 2 +#define R_ALT_SER_BAUDRATE__ser1_tr__timer 3 +#define R_ALT_SER_BAUDRATE__ser1_rec__BITNR 8 +#define R_ALT_SER_BAUDRATE__ser1_rec__WIDTH 2 +#define R_ALT_SER_BAUDRATE__ser1_rec__normal 0 +#define R_ALT_SER_BAUDRATE__ser1_rec__prescale 1 +#define R_ALT_SER_BAUDRATE__ser1_rec__extern 2 +#define R_ALT_SER_BAUDRATE__ser1_rec__timer 3 +#define R_ALT_SER_BAUDRATE__ser0_tr__BITNR 4 +#define R_ALT_SER_BAUDRATE__ser0_tr__WIDTH 2 +#define R_ALT_SER_BAUDRATE__ser0_tr__normal 0 +#define R_ALT_SER_BAUDRATE__ser0_tr__prescale 1 +#define R_ALT_SER_BAUDRATE__ser0_tr__extern 2 +#define R_ALT_SER_BAUDRATE__ser0_tr__timer 3 +#define R_ALT_SER_BAUDRATE__ser0_rec__BITNR 0 +#define R_ALT_SER_BAUDRATE__ser0_rec__WIDTH 2 +#define R_ALT_SER_BAUDRATE__ser0_rec__normal 0 +#define R_ALT_SER_BAUDRATE__ser0_rec__prescale 1 +#define R_ALT_SER_BAUDRATE__ser0_rec__extern 2 +#define R_ALT_SER_BAUDRATE__ser0_rec__timer 3 + +/* +!* Network interface registers +!*/ + +#define R_NETWORK_SA_0 (IO_TYPECAST_UDWORD 0xb0000080) +#define R_NETWORK_SA_0__ma0_low__BITNR 0 +#define R_NETWORK_SA_0__ma0_low__WIDTH 32 + +#define R_NETWORK_SA_1 (IO_TYPECAST_UDWORD 0xb0000084) +#define R_NETWORK_SA_1__ma1_low__BITNR 16 +#define R_NETWORK_SA_1__ma1_low__WIDTH 16 +#define R_NETWORK_SA_1__ma0_high__BITNR 0 +#define R_NETWORK_SA_1__ma0_high__WIDTH 16 + +#define R_NETWORK_SA_2 (IO_TYPECAST_UDWORD 0xb0000088) +#define R_NETWORK_SA_2__ma1_high__BITNR 0 +#define R_NETWORK_SA_2__ma1_high__WIDTH 32 + +#define R_NETWORK_GA_0 (IO_TYPECAST_UDWORD 0xb000008c) +#define R_NETWORK_GA_0__ga_low__BITNR 0 +#define R_NETWORK_GA_0__ga_low__WIDTH 32 + +#define R_NETWORK_GA_1 (IO_TYPECAST_UDWORD 0xb0000090) +#define R_NETWORK_GA_1__ga_high__BITNR 0 +#define R_NETWORK_GA_1__ga_high__WIDTH 32 + +#define R_NETWORK_REC_CONFIG (IO_TYPECAST_UDWORD 0xb0000094) +#define R_NETWORK_REC_CONFIG__max_size__BITNR 10 +#define R_NETWORK_REC_CONFIG__max_size__WIDTH 1 +#define R_NETWORK_REC_CONFIG__max_size__size1518 0 +#define R_NETWORK_REC_CONFIG__max_size__size1522 1 +#define R_NETWORK_REC_CONFIG__duplex__BITNR 9 +#define R_NETWORK_REC_CONFIG__duplex__WIDTH 1 +#define R_NETWORK_REC_CONFIG__duplex__full 1 +#define R_NETWORK_REC_CONFIG__duplex__half 0 +#define R_NETWORK_REC_CONFIG__bad_crc__BITNR 8 +#define R_NETWORK_REC_CONFIG__bad_crc__WIDTH 1 +#define R_NETWORK_REC_CONFIG__bad_crc__receive 1 +#define R_NETWORK_REC_CONFIG__bad_crc__discard 0 +#define R_NETWORK_REC_CONFIG__oversize__BITNR 7 +#define R_NETWORK_REC_CONFIG__oversize__WIDTH 1 +#define R_NETWORK_REC_CONFIG__oversize__receive 1 +#define R_NETWORK_REC_CONFIG__oversize__discard 0 +#define R_NETWORK_REC_CONFIG__undersize__BITNR 6 +#define R_NETWORK_REC_CONFIG__undersize__WIDTH 1 +#define R_NETWORK_REC_CONFIG__undersize__receive 1 +#define R_NETWORK_REC_CONFIG__undersize__discard 0 +#define R_NETWORK_REC_CONFIG__all_roots__BITNR 5 +#define R_NETWORK_REC_CONFIG__all_roots__WIDTH 1 +#define R_NETWORK_REC_CONFIG__all_roots__receive 1 +#define R_NETWORK_REC_CONFIG__all_roots__discard 0 +#define R_NETWORK_REC_CONFIG__tr_broadcast__BITNR 4 +#define R_NETWORK_REC_CONFIG__tr_broadcast__WIDTH 1 +#define R_NETWORK_REC_CONFIG__tr_broadcast__receive 1 +#define R_NETWORK_REC_CONFIG__tr_broadcast__discard 0 +#define R_NETWORK_REC_CONFIG__broadcast__BITNR 3 +#define R_NETWORK_REC_CONFIG__broadcast__WIDTH 1 +#define R_NETWORK_REC_CONFIG__broadcast__receive 1 +#define R_NETWORK_REC_CONFIG__broadcast__discard 0 +#define R_NETWORK_REC_CONFIG__individual__BITNR 2 +#define R_NETWORK_REC_CONFIG__individual__WIDTH 1 +#define R_NETWORK_REC_CONFIG__individual__receive 1 +#define R_NETWORK_REC_CONFIG__individual__discard 0 +#define R_NETWORK_REC_CONFIG__ma1__BITNR 1 +#define R_NETWORK_REC_CONFIG__ma1__WIDTH 1 +#define R_NETWORK_REC_CONFIG__ma1__enable 1 +#define R_NETWORK_REC_CONFIG__ma1__disable 0 +#define R_NETWORK_REC_CONFIG__ma0__BITNR 0 +#define R_NETWORK_REC_CONFIG__ma0__WIDTH 1 +#define R_NETWORK_REC_CONFIG__ma0__enable 1 +#define R_NETWORK_REC_CONFIG__ma0__disable 0 + +#define R_NETWORK_GEN_CONFIG (IO_TYPECAST_UDWORD 0xb0000098) +#define R_NETWORK_GEN_CONFIG__loopback__BITNR 5 +#define R_NETWORK_GEN_CONFIG__loopback__WIDTH 1 +#define R_NETWORK_GEN_CONFIG__loopback__on 1 +#define R_NETWORK_GEN_CONFIG__loopback__off 0 +#define R_NETWORK_GEN_CONFIG__frame__BITNR 4 +#define R_NETWORK_GEN_CONFIG__frame__WIDTH 1 +#define R_NETWORK_GEN_CONFIG__frame__tokenr 1 +#define R_NETWORK_GEN_CONFIG__frame__ether 0 +#define R_NETWORK_GEN_CONFIG__vg__BITNR 3 +#define R_NETWORK_GEN_CONFIG__vg__WIDTH 1 +#define R_NETWORK_GEN_CONFIG__vg__on 1 +#define R_NETWORK_GEN_CONFIG__vg__off 0 +#define R_NETWORK_GEN_CONFIG__phy__BITNR 1 +#define R_NETWORK_GEN_CONFIG__phy__WIDTH 2 +#define R_NETWORK_GEN_CONFIG__phy__sni 0 +#define R_NETWORK_GEN_CONFIG__phy__mii_clk 1 +#define R_NETWORK_GEN_CONFIG__phy__mii_err 2 +#define R_NETWORK_GEN_CONFIG__phy__mii_req 3 +#define R_NETWORK_GEN_CONFIG__enable__BITNR 0 +#define R_NETWORK_GEN_CONFIG__enable__WIDTH 1 +#define R_NETWORK_GEN_CONFIG__enable__on 1 +#define R_NETWORK_GEN_CONFIG__enable__off 0 + +#define R_NETWORK_TR_CTRL (IO_TYPECAST_UDWORD 0xb000009c) +#define R_NETWORK_TR_CTRL__clr_error__BITNR 8 +#define R_NETWORK_TR_CTRL__clr_error__WIDTH 1 +#define R_NETWORK_TR_CTRL__clr_error__clr 1 +#define R_NETWORK_TR_CTRL__clr_error__nop 0 +#define R_NETWORK_TR_CTRL__delay__BITNR 5 +#define R_NETWORK_TR_CTRL__delay__WIDTH 1 +#define R_NETWORK_TR_CTRL__delay__d2us 1 +#define R_NETWORK_TR_CTRL__delay__none 0 +#define R_NETWORK_TR_CTRL__cancel__BITNR 4 +#define R_NETWORK_TR_CTRL__cancel__WIDTH 1 +#define R_NETWORK_TR_CTRL__cancel__do 1 +#define R_NETWORK_TR_CTRL__cancel__dont 0 +#define R_NETWORK_TR_CTRL__cd__BITNR 3 +#define R_NETWORK_TR_CTRL__cd__WIDTH 1 +#define R_NETWORK_TR_CTRL__cd__enable 0 +#define R_NETWORK_TR_CTRL__cd__disable 1 +#define R_NETWORK_TR_CTRL__cd__ack_col 0 +#define R_NETWORK_TR_CTRL__cd__ack_crs 1 +#define R_NETWORK_TR_CTRL__retry__BITNR 2 +#define R_NETWORK_TR_CTRL__retry__WIDTH 1 +#define R_NETWORK_TR_CTRL__retry__enable 0 +#define R_NETWORK_TR_CTRL__retry__disable 1 +#define R_NETWORK_TR_CTRL__pad__BITNR 1 +#define R_NETWORK_TR_CTRL__pad__WIDTH 1 +#define R_NETWORK_TR_CTRL__pad__enable 1 +#define R_NETWORK_TR_CTRL__pad__disable 0 +#define R_NETWORK_TR_CTRL__crc__BITNR 0 +#define R_NETWORK_TR_CTRL__crc__WIDTH 1 +#define R_NETWORK_TR_CTRL__crc__enable 0 +#define R_NETWORK_TR_CTRL__crc__disable 1 + +#define R_NETWORK_MGM_CTRL (IO_TYPECAST_UDWORD 0xb00000a0) +#define R_NETWORK_MGM_CTRL__txd_pins__BITNR 4 +#define R_NETWORK_MGM_CTRL__txd_pins__WIDTH 4 +#define R_NETWORK_MGM_CTRL__txer_pin__BITNR 3 +#define R_NETWORK_MGM_CTRL__txer_pin__WIDTH 1 +#define R_NETWORK_MGM_CTRL__mdck__BITNR 2 +#define R_NETWORK_MGM_CTRL__mdck__WIDTH 1 +#define R_NETWORK_MGM_CTRL__mdoe__BITNR 1 +#define R_NETWORK_MGM_CTRL__mdoe__WIDTH 1 +#define R_NETWORK_MGM_CTRL__mdoe__enable 1 +#define R_NETWORK_MGM_CTRL__mdoe__disable 0 +#define R_NETWORK_MGM_CTRL__mdio__BITNR 0 +#define R_NETWORK_MGM_CTRL__mdio__WIDTH 1 + +#define R_NETWORK_STAT (IO_TYPECAST_RO_UDWORD 0xb00000a0) +#define R_NETWORK_STAT__rxd_pins__BITNR 4 +#define R_NETWORK_STAT__rxd_pins__WIDTH 4 +#define R_NETWORK_STAT__rxer__BITNR 3 +#define R_NETWORK_STAT__rxer__WIDTH 1 +#define R_NETWORK_STAT__underrun__BITNR 2 +#define R_NETWORK_STAT__underrun__WIDTH 1 +#define R_NETWORK_STAT__underrun__yes 1 +#define R_NETWORK_STAT__underrun__no 0 +#define R_NETWORK_STAT__exc_col__BITNR 1 +#define R_NETWORK_STAT__exc_col__WIDTH 1 +#define R_NETWORK_STAT__exc_col__yes 1 +#define R_NETWORK_STAT__exc_col__no 0 +#define R_NETWORK_STAT__mdio__BITNR 0 +#define R_NETWORK_STAT__mdio__WIDTH 1 + +#define R_REC_COUNTERS (IO_TYPECAST_RO_UDWORD 0xb00000a4) +#define R_REC_COUNTERS__congestion__BITNR 24 +#define R_REC_COUNTERS__congestion__WIDTH 8 +#define R_REC_COUNTERS__oversize__BITNR 16 +#define R_REC_COUNTERS__oversize__WIDTH 8 +#define R_REC_COUNTERS__alignment_error__BITNR 8 +#define R_REC_COUNTERS__alignment_error__WIDTH 8 +#define R_REC_COUNTERS__crc_error__BITNR 0 +#define R_REC_COUNTERS__crc_error__WIDTH 8 + +#define R_TR_COUNTERS (IO_TYPECAST_RO_UDWORD 0xb00000a8) +#define R_TR_COUNTERS__deferred__BITNR 24 +#define R_TR_COUNTERS__deferred__WIDTH 8 +#define R_TR_COUNTERS__late_col__BITNR 16 +#define R_TR_COUNTERS__late_col__WIDTH 8 +#define R_TR_COUNTERS__multiple_col__BITNR 8 +#define R_TR_COUNTERS__multiple_col__WIDTH 8 +#define R_TR_COUNTERS__single_col__BITNR 0 +#define R_TR_COUNTERS__single_col__WIDTH 8 + +#define R_PHY_COUNTERS (IO_TYPECAST_RO_UDWORD 0xb00000ac) +#define R_PHY_COUNTERS__sqe_test_error__BITNR 8 +#define R_PHY_COUNTERS__sqe_test_error__WIDTH 8 +#define R_PHY_COUNTERS__carrier_loss__BITNR 0 +#define R_PHY_COUNTERS__carrier_loss__WIDTH 8 + +/* +!* Parallel printer port registers +!*/ + +#define R_PAR0_CTRL_DATA (IO_TYPECAST_UDWORD 0xb0000040) +#define R_PAR0_CTRL_DATA__peri_int__BITNR 24 +#define R_PAR0_CTRL_DATA__peri_int__WIDTH 1 +#define R_PAR0_CTRL_DATA__peri_int__ack 1 +#define R_PAR0_CTRL_DATA__peri_int__nop 0 +#define R_PAR0_CTRL_DATA__oe__BITNR 20 +#define R_PAR0_CTRL_DATA__oe__WIDTH 1 +#define R_PAR0_CTRL_DATA__oe__enable 1 +#define R_PAR0_CTRL_DATA__oe__disable 0 +#define R_PAR0_CTRL_DATA__seli__BITNR 19 +#define R_PAR0_CTRL_DATA__seli__WIDTH 1 +#define R_PAR0_CTRL_DATA__seli__active 1 +#define R_PAR0_CTRL_DATA__seli__inactive 0 +#define R_PAR0_CTRL_DATA__autofd__BITNR 18 +#define R_PAR0_CTRL_DATA__autofd__WIDTH 1 +#define R_PAR0_CTRL_DATA__autofd__active 1 +#define R_PAR0_CTRL_DATA__autofd__inactive 0 +#define R_PAR0_CTRL_DATA__strb__BITNR 17 +#define R_PAR0_CTRL_DATA__strb__WIDTH 1 +#define R_PAR0_CTRL_DATA__strb__active 1 +#define R_PAR0_CTRL_DATA__strb__inactive 0 +#define R_PAR0_CTRL_DATA__init__BITNR 16 +#define R_PAR0_CTRL_DATA__init__WIDTH 1 +#define R_PAR0_CTRL_DATA__init__active 1 +#define R_PAR0_CTRL_DATA__init__inactive 0 +#define R_PAR0_CTRL_DATA__ecp_cmd__BITNR 8 +#define R_PAR0_CTRL_DATA__ecp_cmd__WIDTH 1 +#define R_PAR0_CTRL_DATA__ecp_cmd__command 1 +#define R_PAR0_CTRL_DATA__ecp_cmd__data 0 +#define R_PAR0_CTRL_DATA__data__BITNR 0 +#define R_PAR0_CTRL_DATA__data__WIDTH 8 + +#define R_PAR0_CTRL (IO_TYPECAST_BYTE 0xb0000042) +#define R_PAR0_CTRL__ctrl__BITNR 0 +#define R_PAR0_CTRL__ctrl__WIDTH 5 + +#define R_PAR0_STATUS_DATA (IO_TYPECAST_RO_UDWORD 0xb0000040) +#define R_PAR0_STATUS_DATA__mode__BITNR 29 +#define R_PAR0_STATUS_DATA__mode__WIDTH 3 +#define R_PAR0_STATUS_DATA__mode__manual 0 +#define R_PAR0_STATUS_DATA__mode__centronics 1 +#define R_PAR0_STATUS_DATA__mode__fastbyte 2 +#define R_PAR0_STATUS_DATA__mode__nibble 3 +#define R_PAR0_STATUS_DATA__mode__byte 4 +#define R_PAR0_STATUS_DATA__mode__ecp_fwd 5 +#define R_PAR0_STATUS_DATA__mode__ecp_rev 6 +#define R_PAR0_STATUS_DATA__mode__off 7 +#define R_PAR0_STATUS_DATA__mode__epp_wr1 5 +#define R_PAR0_STATUS_DATA__mode__epp_wr2 6 +#define R_PAR0_STATUS_DATA__mode__epp_wr3 7 +#define R_PAR0_STATUS_DATA__mode__epp_rd 0 +#define R_PAR0_STATUS_DATA__perr__BITNR 28 +#define R_PAR0_STATUS_DATA__perr__WIDTH 1 +#define R_PAR0_STATUS_DATA__perr__active 1 +#define R_PAR0_STATUS_DATA__perr__inactive 0 +#define R_PAR0_STATUS_DATA__ack__BITNR 27 +#define R_PAR0_STATUS_DATA__ack__WIDTH 1 +#define R_PAR0_STATUS_DATA__ack__active 0 +#define R_PAR0_STATUS_DATA__ack__inactive 1 +#define R_PAR0_STATUS_DATA__busy__BITNR 26 +#define R_PAR0_STATUS_DATA__busy__WIDTH 1 +#define R_PAR0_STATUS_DATA__busy__active 1 +#define R_PAR0_STATUS_DATA__busy__inactive 0 +#define R_PAR0_STATUS_DATA__fault__BITNR 25 +#define R_PAR0_STATUS_DATA__fault__WIDTH 1 +#define R_PAR0_STATUS_DATA__fault__active 0 +#define R_PAR0_STATUS_DATA__fault__inactive 1 +#define R_PAR0_STATUS_DATA__sel__BITNR 24 +#define R_PAR0_STATUS_DATA__sel__WIDTH 1 +#define R_PAR0_STATUS_DATA__sel__active 1 +#define R_PAR0_STATUS_DATA__sel__inactive 0 +#define R_PAR0_STATUS_DATA__ext_mode__BITNR 23 +#define R_PAR0_STATUS_DATA__ext_mode__WIDTH 1 +#define R_PAR0_STATUS_DATA__ext_mode__enable 1 +#define R_PAR0_STATUS_DATA__ext_mode__disable 0 +#define R_PAR0_STATUS_DATA__ecp_16__BITNR 22 +#define R_PAR0_STATUS_DATA__ecp_16__WIDTH 1 +#define R_PAR0_STATUS_DATA__ecp_16__active 1 +#define R_PAR0_STATUS_DATA__ecp_16__inactive 0 +#define R_PAR0_STATUS_DATA__tr_rdy__BITNR 17 +#define R_PAR0_STATUS_DATA__tr_rdy__WIDTH 1 +#define R_PAR0_STATUS_DATA__tr_rdy__ready 1 +#define R_PAR0_STATUS_DATA__tr_rdy__busy 0 +#define R_PAR0_STATUS_DATA__dav__BITNR 16 +#define R_PAR0_STATUS_DATA__dav__WIDTH 1 +#define R_PAR0_STATUS_DATA__dav__data 1 +#define R_PAR0_STATUS_DATA__dav__nodata 0 +#define R_PAR0_STATUS_DATA__ecp_cmd__BITNR 8 +#define R_PAR0_STATUS_DATA__ecp_cmd__WIDTH 1 +#define R_PAR0_STATUS_DATA__ecp_cmd__command 1 +#define R_PAR0_STATUS_DATA__ecp_cmd__data 0 +#define R_PAR0_STATUS_DATA__data__BITNR 0 +#define R_PAR0_STATUS_DATA__data__WIDTH 8 + +#define R_PAR0_STATUS (IO_TYPECAST_RO_UWORD 0xb0000042) +#define R_PAR0_STATUS__mode__BITNR 13 +#define R_PAR0_STATUS__mode__WIDTH 3 +#define R_PAR0_STATUS__mode__manual 0 +#define R_PAR0_STATUS__mode__centronics 1 +#define R_PAR0_STATUS__mode__fastbyte 2 +#define R_PAR0_STATUS__mode__nibble 3 +#define R_PAR0_STATUS__mode__byte 4 +#define R_PAR0_STATUS__mode__ecp_fwd 5 +#define R_PAR0_STATUS__mode__ecp_rev 6 +#define R_PAR0_STATUS__mode__off 7 +#define R_PAR0_STATUS__mode__epp_wr1 5 +#define R_PAR0_STATUS__mode__epp_wr2 6 +#define R_PAR0_STATUS__mode__epp_wr3 7 +#define R_PAR0_STATUS__mode__epp_rd 0 +#define R_PAR0_STATUS__perr__BITNR 12 +#define R_PAR0_STATUS__perr__WIDTH 1 +#define R_PAR0_STATUS__perr__active 1 +#define R_PAR0_STATUS__perr__inactive 0 +#define R_PAR0_STATUS__ack__BITNR 11 +#define R_PAR0_STATUS__ack__WIDTH 1 +#define R_PAR0_STATUS__ack__active 0 +#define R_PAR0_STATUS__ack__inactive 1 +#define R_PAR0_STATUS__busy__BITNR 10 +#define R_PAR0_STATUS__busy__WIDTH 1 +#define R_PAR0_STATUS__busy__active 1 +#define R_PAR0_STATUS__busy__inactive 0 +#define R_PAR0_STATUS__fault__BITNR 9 +#define R_PAR0_STATUS__fault__WIDTH 1 +#define R_PAR0_STATUS__fault__active 0 +#define R_PAR0_STATUS__fault__inactive 1 +#define R_PAR0_STATUS__sel__BITNR 8 +#define R_PAR0_STATUS__sel__WIDTH 1 +#define R_PAR0_STATUS__sel__active 1 +#define R_PAR0_STATUS__sel__inactive 0 +#define R_PAR0_STATUS__ext_mode__BITNR 7 +#define R_PAR0_STATUS__ext_mode__WIDTH 1 +#define R_PAR0_STATUS__ext_mode__enable 1 +#define R_PAR0_STATUS__ext_mode__disable 0 +#define R_PAR0_STATUS__ecp_16__BITNR 6 +#define R_PAR0_STATUS__ecp_16__WIDTH 1 +#define R_PAR0_STATUS__ecp_16__active 1 +#define R_PAR0_STATUS__ecp_16__inactive 0 +#define R_PAR0_STATUS__tr_rdy__BITNR 1 +#define R_PAR0_STATUS__tr_rdy__WIDTH 1 +#define R_PAR0_STATUS__tr_rdy__ready 1 +#define R_PAR0_STATUS__tr_rdy__busy 0 +#define R_PAR0_STATUS__dav__BITNR 0 +#define R_PAR0_STATUS__dav__WIDTH 1 +#define R_PAR0_STATUS__dav__data 1 +#define R_PAR0_STATUS__dav__nodata 0 + +#define R_PAR_ECP16_DATA (IO_TYPECAST_UWORD 0xb0000040) +#define R_PAR_ECP16_DATA__data__BITNR 0 +#define R_PAR_ECP16_DATA__data__WIDTH 16 + +#define R_PAR0_CONFIG (IO_TYPECAST_UDWORD 0xb0000044) +#define R_PAR0_CONFIG__ioe__BITNR 25 +#define R_PAR0_CONFIG__ioe__WIDTH 1 +#define R_PAR0_CONFIG__ioe__inv 1 +#define R_PAR0_CONFIG__ioe__noninv 0 +#define R_PAR0_CONFIG__iseli__BITNR 24 +#define R_PAR0_CONFIG__iseli__WIDTH 1 +#define R_PAR0_CONFIG__iseli__inv 1 +#define R_PAR0_CONFIG__iseli__noninv 0 +#define R_PAR0_CONFIG__iautofd__BITNR 23 +#define R_PAR0_CONFIG__iautofd__WIDTH 1 +#define R_PAR0_CONFIG__iautofd__inv 1 +#define R_PAR0_CONFIG__iautofd__noninv 0 +#define R_PAR0_CONFIG__istrb__BITNR 22 +#define R_PAR0_CONFIG__istrb__WIDTH 1 +#define R_PAR0_CONFIG__istrb__inv 1 +#define R_PAR0_CONFIG__istrb__noninv 0 +#define R_PAR0_CONFIG__iinit__BITNR 21 +#define R_PAR0_CONFIG__iinit__WIDTH 1 +#define R_PAR0_CONFIG__iinit__inv 1 +#define R_PAR0_CONFIG__iinit__noninv 0 +#define R_PAR0_CONFIG__iperr__BITNR 20 +#define R_PAR0_CONFIG__iperr__WIDTH 1 +#define R_PAR0_CONFIG__iperr__inv 1 +#define R_PAR0_CONFIG__iperr__noninv 0 +#define R_PAR0_CONFIG__iack__BITNR 19 +#define R_PAR0_CONFIG__iack__WIDTH 1 +#define R_PAR0_CONFIG__iack__inv 1 +#define R_PAR0_CONFIG__iack__noninv 0 +#define R_PAR0_CONFIG__ibusy__BITNR 18 +#define R_PAR0_CONFIG__ibusy__WIDTH 1 +#define R_PAR0_CONFIG__ibusy__inv 1 +#define R_PAR0_CONFIG__ibusy__noninv 0 +#define R_PAR0_CONFIG__ifault__BITNR 17 +#define R_PAR0_CONFIG__ifault__WIDTH 1 +#define R_PAR0_CONFIG__ifault__inv 1 +#define R_PAR0_CONFIG__ifault__noninv 0 +#define R_PAR0_CONFIG__isel__BITNR 16 +#define R_PAR0_CONFIG__isel__WIDTH 1 +#define R_PAR0_CONFIG__isel__inv 1 +#define R_PAR0_CONFIG__isel__noninv 0 +#define R_PAR0_CONFIG__ext_mode__BITNR 11 +#define R_PAR0_CONFIG__ext_mode__WIDTH 1 +#define R_PAR0_CONFIG__ext_mode__enable 1 +#define R_PAR0_CONFIG__ext_mode__disable 0 +#define R_PAR0_CONFIG__wide__BITNR 10 +#define R_PAR0_CONFIG__wide__WIDTH 1 +#define R_PAR0_CONFIG__wide__enable 1 +#define R_PAR0_CONFIG__wide__disable 0 +#define R_PAR0_CONFIG__dma__BITNR 9 +#define R_PAR0_CONFIG__dma__WIDTH 1 +#define R_PAR0_CONFIG__dma__enable 1 +#define R_PAR0_CONFIG__dma__disable 0 +#define R_PAR0_CONFIG__rle_in__BITNR 8 +#define R_PAR0_CONFIG__rle_in__WIDTH 1 +#define R_PAR0_CONFIG__rle_in__enable 1 +#define R_PAR0_CONFIG__rle_in__disable 0 +#define R_PAR0_CONFIG__rle_out__BITNR 7 +#define R_PAR0_CONFIG__rle_out__WIDTH 1 +#define R_PAR0_CONFIG__rle_out__enable 1 +#define R_PAR0_CONFIG__rle_out__disable 0 +#define R_PAR0_CONFIG__enable__BITNR 6 +#define R_PAR0_CONFIG__enable__WIDTH 1 +#define R_PAR0_CONFIG__enable__on 1 +#define R_PAR0_CONFIG__enable__reset 0 +#define R_PAR0_CONFIG__force__BITNR 5 +#define R_PAR0_CONFIG__force__WIDTH 1 +#define R_PAR0_CONFIG__force__on 1 +#define R_PAR0_CONFIG__force__off 0 +#define R_PAR0_CONFIG__ign_ack__BITNR 4 +#define R_PAR0_CONFIG__ign_ack__WIDTH 1 +#define R_PAR0_CONFIG__ign_ack__ignore 1 +#define R_PAR0_CONFIG__ign_ack__wait 0 +#define R_PAR0_CONFIG__oe_ack__BITNR 3 +#define R_PAR0_CONFIG__oe_ack__WIDTH 1 +#define R_PAR0_CONFIG__oe_ack__wait_oe 1 +#define R_PAR0_CONFIG__oe_ack__dont_wait 0 +#define R_PAR0_CONFIG__oe_ack__epp_addr 1 +#define R_PAR0_CONFIG__oe_ack__epp_data 0 +#define R_PAR0_CONFIG__epp_addr_data__BITNR 3 +#define R_PAR0_CONFIG__epp_addr_data__WIDTH 1 +#define R_PAR0_CONFIG__epp_addr_data__wait_oe 1 +#define R_PAR0_CONFIG__epp_addr_data__dont_wait 0 +#define R_PAR0_CONFIG__epp_addr_data__epp_addr 1 +#define R_PAR0_CONFIG__epp_addr_data__epp_data 0 +#define R_PAR0_CONFIG__mode__BITNR 0 +#define R_PAR0_CONFIG__mode__WIDTH 3 +#define R_PAR0_CONFIG__mode__manual 0 +#define R_PAR0_CONFIG__mode__centronics 1 +#define R_PAR0_CONFIG__mode__fastbyte 2 +#define R_PAR0_CONFIG__mode__nibble 3 +#define R_PAR0_CONFIG__mode__byte 4 +#define R_PAR0_CONFIG__mode__ecp_fwd 5 +#define R_PAR0_CONFIG__mode__ecp_rev 6 +#define R_PAR0_CONFIG__mode__off 7 +#define R_PAR0_CONFIG__mode__epp_wr1 5 +#define R_PAR0_CONFIG__mode__epp_wr2 6 +#define R_PAR0_CONFIG__mode__epp_wr3 7 +#define R_PAR0_CONFIG__mode__epp_rd 0 + +#define R_PAR0_DELAY (IO_TYPECAST_UDWORD 0xb0000048) +#define R_PAR0_DELAY__fine_hold__BITNR 21 +#define R_PAR0_DELAY__fine_hold__WIDTH 3 +#define R_PAR0_DELAY__hold__BITNR 16 +#define R_PAR0_DELAY__hold__WIDTH 5 +#define R_PAR0_DELAY__fine_strb__BITNR 13 +#define R_PAR0_DELAY__fine_strb__WIDTH 3 +#define R_PAR0_DELAY__strobe__BITNR 8 +#define R_PAR0_DELAY__strobe__WIDTH 5 +#define R_PAR0_DELAY__fine_setup__BITNR 5 +#define R_PAR0_DELAY__fine_setup__WIDTH 3 +#define R_PAR0_DELAY__setup__BITNR 0 +#define R_PAR0_DELAY__setup__WIDTH 5 + +#define R_PAR1_CTRL_DATA (IO_TYPECAST_UDWORD 0xb0000050) +#define R_PAR1_CTRL_DATA__peri_int__BITNR 24 +#define R_PAR1_CTRL_DATA__peri_int__WIDTH 1 +#define R_PAR1_CTRL_DATA__peri_int__ack 1 +#define R_PAR1_CTRL_DATA__peri_int__nop 0 +#define R_PAR1_CTRL_DATA__oe__BITNR 20 +#define R_PAR1_CTRL_DATA__oe__WIDTH 1 +#define R_PAR1_CTRL_DATA__oe__enable 1 +#define R_PAR1_CTRL_DATA__oe__disable 0 +#define R_PAR1_CTRL_DATA__seli__BITNR 19 +#define R_PAR1_CTRL_DATA__seli__WIDTH 1 +#define R_PAR1_CTRL_DATA__seli__active 1 +#define R_PAR1_CTRL_DATA__seli__inactive 0 +#define R_PAR1_CTRL_DATA__autofd__BITNR 18 +#define R_PAR1_CTRL_DATA__autofd__WIDTH 1 +#define R_PAR1_CTRL_DATA__autofd__active 1 +#define R_PAR1_CTRL_DATA__autofd__inactive 0 +#define R_PAR1_CTRL_DATA__strb__BITNR 17 +#define R_PAR1_CTRL_DATA__strb__WIDTH 1 +#define R_PAR1_CTRL_DATA__strb__active 1 +#define R_PAR1_CTRL_DATA__strb__inactive 0 +#define R_PAR1_CTRL_DATA__init__BITNR 16 +#define R_PAR1_CTRL_DATA__init__WIDTH 1 +#define R_PAR1_CTRL_DATA__init__active 1 +#define R_PAR1_CTRL_DATA__init__inactive 0 +#define R_PAR1_CTRL_DATA__ecp_cmd__BITNR 8 +#define R_PAR1_CTRL_DATA__ecp_cmd__WIDTH 1 +#define R_PAR1_CTRL_DATA__ecp_cmd__command 1 +#define R_PAR1_CTRL_DATA__ecp_cmd__data 0 +#define R_PAR1_CTRL_DATA__data__BITNR 0 +#define R_PAR1_CTRL_DATA__data__WIDTH 8 + +#define R_PAR1_CTRL (IO_TYPECAST_BYTE 0xb0000052) +#define R_PAR1_CTRL__ctrl__BITNR 0 +#define R_PAR1_CTRL__ctrl__WIDTH 5 + +#define R_PAR1_STATUS_DATA (IO_TYPECAST_RO_UDWORD 0xb0000050) +#define R_PAR1_STATUS_DATA__mode__BITNR 29 +#define R_PAR1_STATUS_DATA__mode__WIDTH 3 +#define R_PAR1_STATUS_DATA__mode__manual 0 +#define R_PAR1_STATUS_DATA__mode__centronics 1 +#define R_PAR1_STATUS_DATA__mode__fastbyte 2 +#define R_PAR1_STATUS_DATA__mode__nibble 3 +#define R_PAR1_STATUS_DATA__mode__byte 4 +#define R_PAR1_STATUS_DATA__mode__ecp_fwd 5 +#define R_PAR1_STATUS_DATA__mode__ecp_rev 6 +#define R_PAR1_STATUS_DATA__mode__off 7 +#define R_PAR1_STATUS_DATA__mode__epp_wr1 5 +#define R_PAR1_STATUS_DATA__mode__epp_wr2 6 +#define R_PAR1_STATUS_DATA__mode__epp_wr3 7 +#define R_PAR1_STATUS_DATA__mode__epp_rd 0 +#define R_PAR1_STATUS_DATA__perr__BITNR 28 +#define R_PAR1_STATUS_DATA__perr__WIDTH 1 +#define R_PAR1_STATUS_DATA__perr__active 1 +#define R_PAR1_STATUS_DATA__perr__inactive 0 +#define R_PAR1_STATUS_DATA__ack__BITNR 27 +#define R_PAR1_STATUS_DATA__ack__WIDTH 1 +#define R_PAR1_STATUS_DATA__ack__active 0 +#define R_PAR1_STATUS_DATA__ack__inactive 1 +#define R_PAR1_STATUS_DATA__busy__BITNR 26 +#define R_PAR1_STATUS_DATA__busy__WIDTH 1 +#define R_PAR1_STATUS_DATA__busy__active 1 +#define R_PAR1_STATUS_DATA__busy__inactive 0 +#define R_PAR1_STATUS_DATA__fault__BITNR 25 +#define R_PAR1_STATUS_DATA__fault__WIDTH 1 +#define R_PAR1_STATUS_DATA__fault__active 0 +#define R_PAR1_STATUS_DATA__fault__inactive 1 +#define R_PAR1_STATUS_DATA__sel__BITNR 24 +#define R_PAR1_STATUS_DATA__sel__WIDTH 1 +#define R_PAR1_STATUS_DATA__sel__active 1 +#define R_PAR1_STATUS_DATA__sel__inactive 0 +#define R_PAR1_STATUS_DATA__ext_mode__BITNR 23 +#define R_PAR1_STATUS_DATA__ext_mode__WIDTH 1 +#define R_PAR1_STATUS_DATA__ext_mode__enable 1 +#define R_PAR1_STATUS_DATA__ext_mode__disable 0 +#define R_PAR1_STATUS_DATA__tr_rdy__BITNR 17 +#define R_PAR1_STATUS_DATA__tr_rdy__WIDTH 1 +#define R_PAR1_STATUS_DATA__tr_rdy__ready 1 +#define R_PAR1_STATUS_DATA__tr_rdy__busy 0 +#define R_PAR1_STATUS_DATA__dav__BITNR 16 +#define R_PAR1_STATUS_DATA__dav__WIDTH 1 +#define R_PAR1_STATUS_DATA__dav__data 1 +#define R_PAR1_STATUS_DATA__dav__nodata 0 +#define R_PAR1_STATUS_DATA__ecp_cmd__BITNR 8 +#define R_PAR1_STATUS_DATA__ecp_cmd__WIDTH 1 +#define R_PAR1_STATUS_DATA__ecp_cmd__command 1 +#define R_PAR1_STATUS_DATA__ecp_cmd__data 0 +#define R_PAR1_STATUS_DATA__data__BITNR 0 +#define R_PAR1_STATUS_DATA__data__WIDTH 8 + +#define R_PAR1_STATUS (IO_TYPECAST_RO_UWORD 0xb0000052) +#define R_PAR1_STATUS__mode__BITNR 13 +#define R_PAR1_STATUS__mode__WIDTH 3 +#define R_PAR1_STATUS__mode__manual 0 +#define R_PAR1_STATUS__mode__centronics 1 +#define R_PAR1_STATUS__mode__fastbyte 2 +#define R_PAR1_STATUS__mode__nibble 3 +#define R_PAR1_STATUS__mode__byte 4 +#define R_PAR1_STATUS__mode__ecp_fwd 5 +#define R_PAR1_STATUS__mode__ecp_rev 6 +#define R_PAR1_STATUS__mode__off 7 +#define R_PAR1_STATUS__mode__epp_wr1 5 +#define R_PAR1_STATUS__mode__epp_wr2 6 +#define R_PAR1_STATUS__mode__epp_wr3 7 +#define R_PAR1_STATUS__mode__epp_rd 0 +#define R_PAR1_STATUS__perr__BITNR 12 +#define R_PAR1_STATUS__perr__WIDTH 1 +#define R_PAR1_STATUS__perr__active 1 +#define R_PAR1_STATUS__perr__inactive 0 +#define R_PAR1_STATUS__ack__BITNR 11 +#define R_PAR1_STATUS__ack__WIDTH 1 +#define R_PAR1_STATUS__ack__active 0 +#define R_PAR1_STATUS__ack__inactive 1 +#define R_PAR1_STATUS__busy__BITNR 10 +#define R_PAR1_STATUS__busy__WIDTH 1 +#define R_PAR1_STATUS__busy__active 1 +#define R_PAR1_STATUS__busy__inactive 0 +#define R_PAR1_STATUS__fault__BITNR 9 +#define R_PAR1_STATUS__fault__WIDTH 1 +#define R_PAR1_STATUS__fault__active 0 +#define R_PAR1_STATUS__fault__inactive 1 +#define R_PAR1_STATUS__sel__BITNR 8 +#define R_PAR1_STATUS__sel__WIDTH 1 +#define R_PAR1_STATUS__sel__active 1 +#define R_PAR1_STATUS__sel__inactive 0 +#define R_PAR1_STATUS__ext_mode__BITNR 7 +#define R_PAR1_STATUS__ext_mode__WIDTH 1 +#define R_PAR1_STATUS__ext_mode__enable 1 +#define R_PAR1_STATUS__ext_mode__disable 0 +#define R_PAR1_STATUS__tr_rdy__BITNR 1 +#define R_PAR1_STATUS__tr_rdy__WIDTH 1 +#define R_PAR1_STATUS__tr_rdy__ready 1 +#define R_PAR1_STATUS__tr_rdy__busy 0 +#define R_PAR1_STATUS__dav__BITNR 0 +#define R_PAR1_STATUS__dav__WIDTH 1 +#define R_PAR1_STATUS__dav__data 1 +#define R_PAR1_STATUS__dav__nodata 0 + +#define R_PAR1_CONFIG (IO_TYPECAST_UDWORD 0xb0000054) +#define R_PAR1_CONFIG__ioe__BITNR 25 +#define R_PAR1_CONFIG__ioe__WIDTH 1 +#define R_PAR1_CONFIG__ioe__inv 1 +#define R_PAR1_CONFIG__ioe__noninv 0 +#define R_PAR1_CONFIG__iseli__BITNR 24 +#define R_PAR1_CONFIG__iseli__WIDTH 1 +#define R_PAR1_CONFIG__iseli__inv 1 +#define R_PAR1_CONFIG__iseli__noninv 0 +#define R_PAR1_CONFIG__iautofd__BITNR 23 +#define R_PAR1_CONFIG__iautofd__WIDTH 1 +#define R_PAR1_CONFIG__iautofd__inv 1 +#define R_PAR1_CONFIG__iautofd__noninv 0 +#define R_PAR1_CONFIG__istrb__BITNR 22 +#define R_PAR1_CONFIG__istrb__WIDTH 1 +#define R_PAR1_CONFIG__istrb__inv 1 +#define R_PAR1_CONFIG__istrb__noninv 0 +#define R_PAR1_CONFIG__iinit__BITNR 21 +#define R_PAR1_CONFIG__iinit__WIDTH 1 +#define R_PAR1_CONFIG__iinit__inv 1 +#define R_PAR1_CONFIG__iinit__noninv 0 +#define R_PAR1_CONFIG__iperr__BITNR 20 +#define R_PAR1_CONFIG__iperr__WIDTH 1 +#define R_PAR1_CONFIG__iperr__inv 1 +#define R_PAR1_CONFIG__iperr__noninv 0 +#define R_PAR1_CONFIG__iack__BITNR 19 +#define R_PAR1_CONFIG__iack__WIDTH 1 +#define R_PAR1_CONFIG__iack__inv 1 +#define R_PAR1_CONFIG__iack__noninv 0 +#define R_PAR1_CONFIG__ibusy__BITNR 18 +#define R_PAR1_CONFIG__ibusy__WIDTH 1 +#define R_PAR1_CONFIG__ibusy__inv 1 +#define R_PAR1_CONFIG__ibusy__noninv 0 +#define R_PAR1_CONFIG__ifault__BITNR 17 +#define R_PAR1_CONFIG__ifault__WIDTH 1 +#define R_PAR1_CONFIG__ifault__inv 1 +#define R_PAR1_CONFIG__ifault__noninv 0 +#define R_PAR1_CONFIG__isel__BITNR 16 +#define R_PAR1_CONFIG__isel__WIDTH 1 +#define R_PAR1_CONFIG__isel__inv 1 +#define R_PAR1_CONFIG__isel__noninv 0 +#define R_PAR1_CONFIG__ext_mode__BITNR 11 +#define R_PAR1_CONFIG__ext_mode__WIDTH 1 +#define R_PAR1_CONFIG__ext_mode__enable 1 +#define R_PAR1_CONFIG__ext_mode__disable 0 +#define R_PAR1_CONFIG__dma__BITNR 9 +#define R_PAR1_CONFIG__dma__WIDTH 1 +#define R_PAR1_CONFIG__dma__enable 1 +#define R_PAR1_CONFIG__dma__disable 0 +#define R_PAR1_CONFIG__rle_in__BITNR 8 +#define R_PAR1_CONFIG__rle_in__WIDTH 1 +#define R_PAR1_CONFIG__rle_in__enable 1 +#define R_PAR1_CONFIG__rle_in__disable 0 +#define R_PAR1_CONFIG__rle_out__BITNR 7 +#define R_PAR1_CONFIG__rle_out__WIDTH 1 +#define R_PAR1_CONFIG__rle_out__enable 1 +#define R_PAR1_CONFIG__rle_out__disable 0 +#define R_PAR1_CONFIG__enable__BITNR 6 +#define R_PAR1_CONFIG__enable__WIDTH 1 +#define R_PAR1_CONFIG__enable__on 1 +#define R_PAR1_CONFIG__enable__reset 0 +#define R_PAR1_CONFIG__force__BITNR 5 +#define R_PAR1_CONFIG__force__WIDTH 1 +#define R_PAR1_CONFIG__force__on 1 +#define R_PAR1_CONFIG__force__off 0 +#define R_PAR1_CONFIG__ign_ack__BITNR 4 +#define R_PAR1_CONFIG__ign_ack__WIDTH 1 +#define R_PAR1_CONFIG__ign_ack__ignore 1 +#define R_PAR1_CONFIG__ign_ack__wait 0 +#define R_PAR1_CONFIG__oe_ack__BITNR 3 +#define R_PAR1_CONFIG__oe_ack__WIDTH 1 +#define R_PAR1_CONFIG__oe_ack__wait_oe 1 +#define R_PAR1_CONFIG__oe_ack__dont_wait 0 +#define R_PAR1_CONFIG__oe_ack__epp_addr 1 +#define R_PAR1_CONFIG__oe_ack__epp_data 0 +#define R_PAR1_CONFIG__epp_addr_data__BITNR 3 +#define R_PAR1_CONFIG__epp_addr_data__WIDTH 1 +#define R_PAR1_CONFIG__epp_addr_data__wait_oe 1 +#define R_PAR1_CONFIG__epp_addr_data__dont_wait 0 +#define R_PAR1_CONFIG__epp_addr_data__epp_addr 1 +#define R_PAR1_CONFIG__epp_addr_data__epp_data 0 +#define R_PAR1_CONFIG__mode__BITNR 0 +#define R_PAR1_CONFIG__mode__WIDTH 3 +#define R_PAR1_CONFIG__mode__manual 0 +#define R_PAR1_CONFIG__mode__centronics 1 +#define R_PAR1_CONFIG__mode__fastbyte 2 +#define R_PAR1_CONFIG__mode__nibble 3 +#define R_PAR1_CONFIG__mode__byte 4 +#define R_PAR1_CONFIG__mode__ecp_fwd 5 +#define R_PAR1_CONFIG__mode__ecp_rev 6 +#define R_PAR1_CONFIG__mode__off 7 +#define R_PAR1_CONFIG__mode__epp_wr1 5 +#define R_PAR1_CONFIG__mode__epp_wr2 6 +#define R_PAR1_CONFIG__mode__epp_wr3 7 +#define R_PAR1_CONFIG__mode__epp_rd 0 + +#define R_PAR1_DELAY (IO_TYPECAST_UDWORD 0xb0000058) +#define R_PAR1_DELAY__fine_hold__BITNR 21 +#define R_PAR1_DELAY__fine_hold__WIDTH 3 +#define R_PAR1_DELAY__hold__BITNR 16 +#define R_PAR1_DELAY__hold__WIDTH 5 +#define R_PAR1_DELAY__fine_strb__BITNR 13 +#define R_PAR1_DELAY__fine_strb__WIDTH 3 +#define R_PAR1_DELAY__strobe__BITNR 8 +#define R_PAR1_DELAY__strobe__WIDTH 5 +#define R_PAR1_DELAY__fine_setup__BITNR 5 +#define R_PAR1_DELAY__fine_setup__WIDTH 3 +#define R_PAR1_DELAY__setup__BITNR 0 +#define R_PAR1_DELAY__setup__WIDTH 5 + +/* +!* ATA interface registers +!*/ + +#define R_ATA_CTRL_DATA (IO_TYPECAST_UDWORD 0xb0000040) +#define R_ATA_CTRL_DATA__sel__BITNR 30 +#define R_ATA_CTRL_DATA__sel__WIDTH 2 +#define R_ATA_CTRL_DATA__cs1__BITNR 29 +#define R_ATA_CTRL_DATA__cs1__WIDTH 1 +#define R_ATA_CTRL_DATA__cs1__active 1 +#define R_ATA_CTRL_DATA__cs1__inactive 0 +#define R_ATA_CTRL_DATA__cs0__BITNR 28 +#define R_ATA_CTRL_DATA__cs0__WIDTH 1 +#define R_ATA_CTRL_DATA__cs0__active 1 +#define R_ATA_CTRL_DATA__cs0__inactive 0 +#define R_ATA_CTRL_DATA__addr__BITNR 25 +#define R_ATA_CTRL_DATA__addr__WIDTH 3 +#define R_ATA_CTRL_DATA__rw__BITNR 24 +#define R_ATA_CTRL_DATA__rw__WIDTH 1 +#define R_ATA_CTRL_DATA__rw__read 1 +#define R_ATA_CTRL_DATA__rw__write 0 +#define R_ATA_CTRL_DATA__src_dst__BITNR 23 +#define R_ATA_CTRL_DATA__src_dst__WIDTH 1 +#define R_ATA_CTRL_DATA__src_dst__dma 1 +#define R_ATA_CTRL_DATA__src_dst__register 0 +#define R_ATA_CTRL_DATA__handsh__BITNR 22 +#define R_ATA_CTRL_DATA__handsh__WIDTH 1 +#define R_ATA_CTRL_DATA__handsh__dma 1 +#define R_ATA_CTRL_DATA__handsh__pio 0 +#define R_ATA_CTRL_DATA__multi__BITNR 21 +#define R_ATA_CTRL_DATA__multi__WIDTH 1 +#define R_ATA_CTRL_DATA__multi__on 1 +#define R_ATA_CTRL_DATA__multi__off 0 +#define R_ATA_CTRL_DATA__dma_size__BITNR 20 +#define R_ATA_CTRL_DATA__dma_size__WIDTH 1 +#define R_ATA_CTRL_DATA__dma_size__byte 1 +#define R_ATA_CTRL_DATA__dma_size__word 0 +#define R_ATA_CTRL_DATA__data__BITNR 0 +#define R_ATA_CTRL_DATA__data__WIDTH 16 + +#define R_ATA_STATUS_DATA (IO_TYPECAST_RO_UDWORD 0xb0000040) +#define R_ATA_STATUS_DATA__busy__BITNR 18 +#define R_ATA_STATUS_DATA__busy__WIDTH 1 +#define R_ATA_STATUS_DATA__busy__yes 1 +#define R_ATA_STATUS_DATA__busy__no 0 +#define R_ATA_STATUS_DATA__tr_rdy__BITNR 17 +#define R_ATA_STATUS_DATA__tr_rdy__WIDTH 1 +#define R_ATA_STATUS_DATA__tr_rdy__ready 1 +#define R_ATA_STATUS_DATA__tr_rdy__busy 0 +#define R_ATA_STATUS_DATA__dav__BITNR 16 +#define R_ATA_STATUS_DATA__dav__WIDTH 1 +#define R_ATA_STATUS_DATA__dav__data 1 +#define R_ATA_STATUS_DATA__dav__nodata 0 +#define R_ATA_STATUS_DATA__data__BITNR 0 +#define R_ATA_STATUS_DATA__data__WIDTH 16 + +#define R_ATA_CONFIG (IO_TYPECAST_UDWORD 0xb0000044) +#define R_ATA_CONFIG__enable__BITNR 25 +#define R_ATA_CONFIG__enable__WIDTH 1 +#define R_ATA_CONFIG__enable__on 1 +#define R_ATA_CONFIG__enable__off 0 +#define R_ATA_CONFIG__dma_strobe__BITNR 20 +#define R_ATA_CONFIG__dma_strobe__WIDTH 5 +#define R_ATA_CONFIG__dma_hold__BITNR 15 +#define R_ATA_CONFIG__dma_hold__WIDTH 5 +#define R_ATA_CONFIG__pio_setup__BITNR 10 +#define R_ATA_CONFIG__pio_setup__WIDTH 5 +#define R_ATA_CONFIG__pio_strobe__BITNR 5 +#define R_ATA_CONFIG__pio_strobe__WIDTH 5 +#define R_ATA_CONFIG__pio_hold__BITNR 0 +#define R_ATA_CONFIG__pio_hold__WIDTH 5 + +#define R_ATA_TRANSFER_CNT (IO_TYPECAST_UDWORD 0xb0000048) +#define R_ATA_TRANSFER_CNT__count__BITNR 0 +#define R_ATA_TRANSFER_CNT__count__WIDTH 17 + +/* +!* SCSI registers +!*/ + +#define R_SCSI0_CTRL (IO_TYPECAST_UDWORD 0xb0000044) +#define R_SCSI0_CTRL__id_type__BITNR 31 +#define R_SCSI0_CTRL__id_type__WIDTH 1 +#define R_SCSI0_CTRL__id_type__software 1 +#define R_SCSI0_CTRL__id_type__hardware 0 +#define R_SCSI0_CTRL__sel_timeout__BITNR 24 +#define R_SCSI0_CTRL__sel_timeout__WIDTH 7 +#define R_SCSI0_CTRL__synch_per__BITNR 16 +#define R_SCSI0_CTRL__synch_per__WIDTH 8 +#define R_SCSI0_CTRL__rst__BITNR 15 +#define R_SCSI0_CTRL__rst__WIDTH 1 +#define R_SCSI0_CTRL__rst__yes 1 +#define R_SCSI0_CTRL__rst__no 0 +#define R_SCSI0_CTRL__atn__BITNR 14 +#define R_SCSI0_CTRL__atn__WIDTH 1 +#define R_SCSI0_CTRL__atn__yes 1 +#define R_SCSI0_CTRL__atn__no 0 +#define R_SCSI0_CTRL__my_id__BITNR 9 +#define R_SCSI0_CTRL__my_id__WIDTH 4 +#define R_SCSI0_CTRL__target_id__BITNR 4 +#define R_SCSI0_CTRL__target_id__WIDTH 4 +#define R_SCSI0_CTRL__fast_20__BITNR 3 +#define R_SCSI0_CTRL__fast_20__WIDTH 1 +#define R_SCSI0_CTRL__fast_20__yes 1 +#define R_SCSI0_CTRL__fast_20__no 0 +#define R_SCSI0_CTRL__bus_width__BITNR 2 +#define R_SCSI0_CTRL__bus_width__WIDTH 1 +#define R_SCSI0_CTRL__bus_width__wide 1 +#define R_SCSI0_CTRL__bus_width__narrow 0 +#define R_SCSI0_CTRL__synch__BITNR 1 +#define R_SCSI0_CTRL__synch__WIDTH 1 +#define R_SCSI0_CTRL__synch__synch 1 +#define R_SCSI0_CTRL__synch__asynch 0 +#define R_SCSI0_CTRL__enable__BITNR 0 +#define R_SCSI0_CTRL__enable__WIDTH 1 +#define R_SCSI0_CTRL__enable__on 1 +#define R_SCSI0_CTRL__enable__off 0 + +#define R_SCSI0_CMD_DATA (IO_TYPECAST_UDWORD 0xb0000040) +#define R_SCSI0_CMD_DATA__parity_in__BITNR 26 +#define R_SCSI0_CMD_DATA__parity_in__WIDTH 1 +#define R_SCSI0_CMD_DATA__parity_in__on 0 +#define R_SCSI0_CMD_DATA__parity_in__off 1 +#define R_SCSI0_CMD_DATA__skip__BITNR 25 +#define R_SCSI0_CMD_DATA__skip__WIDTH 1 +#define R_SCSI0_CMD_DATA__skip__on 1 +#define R_SCSI0_CMD_DATA__skip__off 0 +#define R_SCSI0_CMD_DATA__clr_status__BITNR 24 +#define R_SCSI0_CMD_DATA__clr_status__WIDTH 1 +#define R_SCSI0_CMD_DATA__clr_status__yes 1 +#define R_SCSI0_CMD_DATA__clr_status__nop 0 +#define R_SCSI0_CMD_DATA__asynch_setup__BITNR 20 +#define R_SCSI0_CMD_DATA__asynch_setup__WIDTH 4 +#define R_SCSI0_CMD_DATA__command__BITNR 16 +#define R_SCSI0_CMD_DATA__command__WIDTH 4 +#define R_SCSI0_CMD_DATA__command__full_din_1 0 +#define R_SCSI0_CMD_DATA__command__full_dout_1 1 +#define R_SCSI0_CMD_DATA__command__full_stat_1 2 +#define R_SCSI0_CMD_DATA__command__resel_din 3 +#define R_SCSI0_CMD_DATA__command__resel_dout 4 +#define R_SCSI0_CMD_DATA__command__resel_stat 5 +#define R_SCSI0_CMD_DATA__command__arb_only 6 +#define R_SCSI0_CMD_DATA__command__full_din_3 8 +#define R_SCSI0_CMD_DATA__command__full_dout_3 9 +#define R_SCSI0_CMD_DATA__command__full_stat_3 10 +#define R_SCSI0_CMD_DATA__command__man_data_in 11 +#define R_SCSI0_CMD_DATA__command__man_data_out 12 +#define R_SCSI0_CMD_DATA__command__man_rat 13 +#define R_SCSI0_CMD_DATA__data_out__BITNR 0 +#define R_SCSI0_CMD_DATA__data_out__WIDTH 16 + +#define R_SCSI0_DATA (IO_TYPECAST_UWORD 0xb0000040) +#define R_SCSI0_DATA__data_out__BITNR 0 +#define R_SCSI0_DATA__data_out__WIDTH 16 + +#define R_SCSI0_CMD (IO_TYPECAST_BYTE 0xb0000042) +#define R_SCSI0_CMD__asynch_setup__BITNR 4 +#define R_SCSI0_CMD__asynch_setup__WIDTH 4 +#define R_SCSI0_CMD__command__BITNR 0 +#define R_SCSI0_CMD__command__WIDTH 4 +#define R_SCSI0_CMD__command__full_din_1 0 +#define R_SCSI0_CMD__command__full_dout_1 1 +#define R_SCSI0_CMD__command__full_stat_1 2 +#define R_SCSI0_CMD__command__resel_din 3 +#define R_SCSI0_CMD__command__resel_dout 4 +#define R_SCSI0_CMD__command__resel_stat 5 +#define R_SCSI0_CMD__command__arb_only 6 +#define R_SCSI0_CMD__command__full_din_3 8 +#define R_SCSI0_CMD__command__full_dout_3 9 +#define R_SCSI0_CMD__command__full_stat_3 10 +#define R_SCSI0_CMD__command__man_data_in 11 +#define R_SCSI0_CMD__command__man_data_out 12 +#define R_SCSI0_CMD__command__man_rat 13 + +#define R_SCSI0_STATUS_CTRL (IO_TYPECAST_BYTE 0xb0000043) +#define R_SCSI0_STATUS_CTRL__parity_in__BITNR 2 +#define R_SCSI0_STATUS_CTRL__parity_in__WIDTH 1 +#define R_SCSI0_STATUS_CTRL__parity_in__on 0 +#define R_SCSI0_STATUS_CTRL__parity_in__off 1 +#define R_SCSI0_STATUS_CTRL__skip__BITNR 1 +#define R_SCSI0_STATUS_CTRL__skip__WIDTH 1 +#define R_SCSI0_STATUS_CTRL__skip__on 1 +#define R_SCSI0_STATUS_CTRL__skip__off 0 +#define R_SCSI0_STATUS_CTRL__clr_status__BITNR 0 +#define R_SCSI0_STATUS_CTRL__clr_status__WIDTH 1 +#define R_SCSI0_STATUS_CTRL__clr_status__yes 1 +#define R_SCSI0_STATUS_CTRL__clr_status__nop 0 + +#define R_SCSI0_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000048) +#define R_SCSI0_STATUS__tst_arb_won__BITNR 23 +#define R_SCSI0_STATUS__tst_arb_won__WIDTH 1 +#define R_SCSI0_STATUS__tst_resel__BITNR 22 +#define R_SCSI0_STATUS__tst_resel__WIDTH 1 +#define R_SCSI0_STATUS__parity_error__BITNR 21 +#define R_SCSI0_STATUS__parity_error__WIDTH 1 +#define R_SCSI0_STATUS__bus_reset__BITNR 20 +#define R_SCSI0_STATUS__bus_reset__WIDTH 1 +#define R_SCSI0_STATUS__bus_reset__yes 1 +#define R_SCSI0_STATUS__bus_reset__no 0 +#define R_SCSI0_STATUS__resel_target__BITNR 15 +#define R_SCSI0_STATUS__resel_target__WIDTH 4 +#define R_SCSI0_STATUS__resel__BITNR 14 +#define R_SCSI0_STATUS__resel__WIDTH 1 +#define R_SCSI0_STATUS__resel__yes 1 +#define R_SCSI0_STATUS__resel__no 0 +#define R_SCSI0_STATUS__curr_phase__BITNR 11 +#define R_SCSI0_STATUS__curr_phase__WIDTH 3 +#define R_SCSI0_STATUS__curr_phase__ph_undef 0 +#define R_SCSI0_STATUS__curr_phase__ph_msg_in 7 +#define R_SCSI0_STATUS__curr_phase__ph_msg_out 6 +#define R_SCSI0_STATUS__curr_phase__ph_status 3 +#define R_SCSI0_STATUS__curr_phase__ph_command 2 +#define R_SCSI0_STATUS__curr_phase__ph_data_in 5 +#define R_SCSI0_STATUS__curr_phase__ph_data_out 4 +#define R_SCSI0_STATUS__curr_phase__ph_resel 1 +#define R_SCSI0_STATUS__last_seq_step__BITNR 6 +#define R_SCSI0_STATUS__last_seq_step__WIDTH 5 +#define R_SCSI0_STATUS__last_seq_step__st_bus_free 24 +#define R_SCSI0_STATUS__last_seq_step__st_arbitrate 8 +#define R_SCSI0_STATUS__last_seq_step__st_resel_req 29 +#define R_SCSI0_STATUS__last_seq_step__st_msg_1 2 +#define R_SCSI0_STATUS__last_seq_step__st_manual 28 +#define R_SCSI0_STATUS__last_seq_step__st_transf_cmd 30 +#define R_SCSI0_STATUS__last_seq_step__st_msg_2 6 +#define R_SCSI0_STATUS__last_seq_step__st_msg_3 22 +#define R_SCSI0_STATUS__last_seq_step__st_answer 3 +#define R_SCSI0_STATUS__last_seq_step__st_synch_din_perr 1 +#define R_SCSI0_STATUS__last_seq_step__st_transfer_done 15 +#define R_SCSI0_STATUS__last_seq_step__st_synch_dout 0 +#define R_SCSI0_STATUS__last_seq_step__st_asynch_dout 25 +#define R_SCSI0_STATUS__last_seq_step__st_synch_din 13 +#define R_SCSI0_STATUS__last_seq_step__st_asynch_din 9 +#define R_SCSI0_STATUS__last_seq_step__st_synch_dout_ack 4 +#define R_SCSI0_STATUS__last_seq_step__st_synch_din_ack 12 +#define R_SCSI0_STATUS__last_seq_step__st_synch_din_ack_perr 5 +#define R_SCSI0_STATUS__last_seq_step__st_asynch_dout_end 11 +#define R_SCSI0_STATUS__last_seq_step__st_iwr 27 +#define R_SCSI0_STATUS__last_seq_step__st_wait_free_disc 21 +#define R_SCSI0_STATUS__last_seq_step__st_sdp_disc 7 +#define R_SCSI0_STATUS__last_seq_step__st_cc 31 +#define R_SCSI0_STATUS__last_seq_step__st_iwr_good 14 +#define R_SCSI0_STATUS__last_seq_step__st_iwr_cc 23 +#define R_SCSI0_STATUS__last_seq_step__st_wait_free_iwr_cc 17 +#define R_SCSI0_STATUS__last_seq_step__st_wait_free_cc 20 +#define R_SCSI0_STATUS__last_seq_step__st_wait_free_sdp_disc 16 +#define R_SCSI0_STATUS__last_seq_step__st_manual_req 10 +#define R_SCSI0_STATUS__last_seq_step__st_manual_din_prot 18 +#define R_SCSI0_STATUS__valid_status__BITNR 5 +#define R_SCSI0_STATUS__valid_status__WIDTH 1 +#define R_SCSI0_STATUS__valid_status__yes 1 +#define R_SCSI0_STATUS__valid_status__no 0 +#define R_SCSI0_STATUS__seq_status__BITNR 0 +#define R_SCSI0_STATUS__seq_status__WIDTH 5 +#define R_SCSI0_STATUS__seq_status__info_seq_complete 0 +#define R_SCSI0_STATUS__seq_status__info_parity_error 1 +#define R_SCSI0_STATUS__seq_status__info_unhandled_msg_in 2 +#define R_SCSI0_STATUS__seq_status__info_unexp_ph_change 3 +#define R_SCSI0_STATUS__seq_status__info_arb_lost 4 +#define R_SCSI0_STATUS__seq_status__info_sel_timeout 5 +#define R_SCSI0_STATUS__seq_status__info_unexp_bf 6 +#define R_SCSI0_STATUS__seq_status__info_illegal_op 7 +#define R_SCSI0_STATUS__seq_status__info_rec_recvd 8 +#define R_SCSI0_STATUS__seq_status__info_reselected 9 +#define R_SCSI0_STATUS__seq_status__info_unhandled_status 10 +#define R_SCSI0_STATUS__seq_status__info_bus_reset 11 +#define R_SCSI0_STATUS__seq_status__info_illegal_bf 12 +#define R_SCSI0_STATUS__seq_status__info_bus_free 13 + +#define R_SCSI0_DATA_IN (IO_TYPECAST_RO_UWORD 0xb0000040) +#define R_SCSI0_DATA_IN__data_in__BITNR 0 +#define R_SCSI0_DATA_IN__data_in__WIDTH 16 + +#define R_SCSI1_CTRL (IO_TYPECAST_UDWORD 0xb0000054) +#define R_SCSI1_CTRL__id_type__BITNR 31 +#define R_SCSI1_CTRL__id_type__WIDTH 1 +#define R_SCSI1_CTRL__id_type__software 1 +#define R_SCSI1_CTRL__id_type__hardware 0 +#define R_SCSI1_CTRL__sel_timeout__BITNR 24 +#define R_SCSI1_CTRL__sel_timeout__WIDTH 7 +#define R_SCSI1_CTRL__synch_per__BITNR 16 +#define R_SCSI1_CTRL__synch_per__WIDTH 8 +#define R_SCSI1_CTRL__rst__BITNR 15 +#define R_SCSI1_CTRL__rst__WIDTH 1 +#define R_SCSI1_CTRL__rst__yes 1 +#define R_SCSI1_CTRL__rst__no 0 +#define R_SCSI1_CTRL__atn__BITNR 14 +#define R_SCSI1_CTRL__atn__WIDTH 1 +#define R_SCSI1_CTRL__atn__yes 1 +#define R_SCSI1_CTRL__atn__no 0 +#define R_SCSI1_CTRL__my_id__BITNR 9 +#define R_SCSI1_CTRL__my_id__WIDTH 4 +#define R_SCSI1_CTRL__target_id__BITNR 4 +#define R_SCSI1_CTRL__target_id__WIDTH 4 +#define R_SCSI1_CTRL__fast_20__BITNR 3 +#define R_SCSI1_CTRL__fast_20__WIDTH 1 +#define R_SCSI1_CTRL__fast_20__yes 1 +#define R_SCSI1_CTRL__fast_20__no 0 +#define R_SCSI1_CTRL__bus_width__BITNR 2 +#define R_SCSI1_CTRL__bus_width__WIDTH 1 +#define R_SCSI1_CTRL__bus_width__wide 1 +#define R_SCSI1_CTRL__bus_width__narrow 0 +#define R_SCSI1_CTRL__synch__BITNR 1 +#define R_SCSI1_CTRL__synch__WIDTH 1 +#define R_SCSI1_CTRL__synch__synch 1 +#define R_SCSI1_CTRL__synch__asynch 0 +#define R_SCSI1_CTRL__enable__BITNR 0 +#define R_SCSI1_CTRL__enable__WIDTH 1 +#define R_SCSI1_CTRL__enable__on 1 +#define R_SCSI1_CTRL__enable__off 0 + +#define R_SCSI1_CMD_DATA (IO_TYPECAST_UDWORD 0xb0000050) +#define R_SCSI1_CMD_DATA__parity_in__BITNR 26 +#define R_SCSI1_CMD_DATA__parity_in__WIDTH 1 +#define R_SCSI1_CMD_DATA__parity_in__on 0 +#define R_SCSI1_CMD_DATA__parity_in__off 1 +#define R_SCSI1_CMD_DATA__skip__BITNR 25 +#define R_SCSI1_CMD_DATA__skip__WIDTH 1 +#define R_SCSI1_CMD_DATA__skip__on 1 +#define R_SCSI1_CMD_DATA__skip__off 0 +#define R_SCSI1_CMD_DATA__clr_status__BITNR 24 +#define R_SCSI1_CMD_DATA__clr_status__WIDTH 1 +#define R_SCSI1_CMD_DATA__clr_status__yes 1 +#define R_SCSI1_CMD_DATA__clr_status__nop 0 +#define R_SCSI1_CMD_DATA__asynch_setup__BITNR 20 +#define R_SCSI1_CMD_DATA__asynch_setup__WIDTH 4 +#define R_SCSI1_CMD_DATA__command__BITNR 16 +#define R_SCSI1_CMD_DATA__command__WIDTH 4 +#define R_SCSI1_CMD_DATA__command__full_din_1 0 +#define R_SCSI1_CMD_DATA__command__full_dout_1 1 +#define R_SCSI1_CMD_DATA__command__full_stat_1 2 +#define R_SCSI1_CMD_DATA__command__resel_din 3 +#define R_SCSI1_CMD_DATA__command__resel_dout 4 +#define R_SCSI1_CMD_DATA__command__resel_stat 5 +#define R_SCSI1_CMD_DATA__command__arb_only 6 +#define R_SCSI1_CMD_DATA__command__full_din_3 8 +#define R_SCSI1_CMD_DATA__command__full_dout_3 9 +#define R_SCSI1_CMD_DATA__command__full_stat_3 10 +#define R_SCSI1_CMD_DATA__command__man_data_in 11 +#define R_SCSI1_CMD_DATA__command__man_data_out 12 +#define R_SCSI1_CMD_DATA__command__man_rat 13 +#define R_SCSI1_CMD_DATA__data_out__BITNR 0 +#define R_SCSI1_CMD_DATA__data_out__WIDTH 16 + +#define R_SCSI1_DATA (IO_TYPECAST_UWORD 0xb0000050) +#define R_SCSI1_DATA__data_out__BITNR 0 +#define R_SCSI1_DATA__data_out__WIDTH 16 + +#define R_SCSI1_CMD (IO_TYPECAST_BYTE 0xb0000052) +#define R_SCSI1_CMD__asynch_setup__BITNR 4 +#define R_SCSI1_CMD__asynch_setup__WIDTH 4 +#define R_SCSI1_CMD__command__BITNR 0 +#define R_SCSI1_CMD__command__WIDTH 4 +#define R_SCSI1_CMD__command__full_din_1 0 +#define R_SCSI1_CMD__command__full_dout_1 1 +#define R_SCSI1_CMD__command__full_stat_1 2 +#define R_SCSI1_CMD__command__resel_din 3 +#define R_SCSI1_CMD__command__resel_dout 4 +#define R_SCSI1_CMD__command__resel_stat 5 +#define R_SCSI1_CMD__command__arb_only 6 +#define R_SCSI1_CMD__command__full_din_3 8 +#define R_SCSI1_CMD__command__full_dout_3 9 +#define R_SCSI1_CMD__command__full_stat_3 10 +#define R_SCSI1_CMD__command__man_data_in 11 +#define R_SCSI1_CMD__command__man_data_out 12 +#define R_SCSI1_CMD__command__man_rat 13 + +#define R_SCSI1_STATUS_CTRL (IO_TYPECAST_BYTE 0xb0000053) +#define R_SCSI1_STATUS_CTRL__parity_in__BITNR 2 +#define R_SCSI1_STATUS_CTRL__parity_in__WIDTH 1 +#define R_SCSI1_STATUS_CTRL__parity_in__on 0 +#define R_SCSI1_STATUS_CTRL__parity_in__off 1 +#define R_SCSI1_STATUS_CTRL__skip__BITNR 1 +#define R_SCSI1_STATUS_CTRL__skip__WIDTH 1 +#define R_SCSI1_STATUS_CTRL__skip__on 1 +#define R_SCSI1_STATUS_CTRL__skip__off 0 +#define R_SCSI1_STATUS_CTRL__clr_status__BITNR 0 +#define R_SCSI1_STATUS_CTRL__clr_status__WIDTH 1 +#define R_SCSI1_STATUS_CTRL__clr_status__yes 1 +#define R_SCSI1_STATUS_CTRL__clr_status__nop 0 + +#define R_SCSI1_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000058) +#define R_SCSI1_STATUS__tst_arb_won__BITNR 23 +#define R_SCSI1_STATUS__tst_arb_won__WIDTH 1 +#define R_SCSI1_STATUS__tst_resel__BITNR 22 +#define R_SCSI1_STATUS__tst_resel__WIDTH 1 +#define R_SCSI1_STATUS__parity_error__BITNR 21 +#define R_SCSI1_STATUS__parity_error__WIDTH 1 +#define R_SCSI1_STATUS__bus_reset__BITNR 20 +#define R_SCSI1_STATUS__bus_reset__WIDTH 1 +#define R_SCSI1_STATUS__bus_reset__yes 1 +#define R_SCSI1_STATUS__bus_reset__no 0 +#define R_SCSI1_STATUS__resel_target__BITNR 15 +#define R_SCSI1_STATUS__resel_target__WIDTH 4 +#define R_SCSI1_STATUS__resel__BITNR 14 +#define R_SCSI1_STATUS__resel__WIDTH 1 +#define R_SCSI1_STATUS__resel__yes 1 +#define R_SCSI1_STATUS__resel__no 0 +#define R_SCSI1_STATUS__curr_phase__BITNR 11 +#define R_SCSI1_STATUS__curr_phase__WIDTH 3 +#define R_SCSI1_STATUS__curr_phase__ph_undef 0 +#define R_SCSI1_STATUS__curr_phase__ph_msg_in 7 +#define R_SCSI1_STATUS__curr_phase__ph_msg_out 6 +#define R_SCSI1_STATUS__curr_phase__ph_status 3 +#define R_SCSI1_STATUS__curr_phase__ph_command 2 +#define R_SCSI1_STATUS__curr_phase__ph_data_in 5 +#define R_SCSI1_STATUS__curr_phase__ph_data_out 4 +#define R_SCSI1_STATUS__curr_phase__ph_resel 1 +#define R_SCSI1_STATUS__last_seq_step__BITNR 6 +#define R_SCSI1_STATUS__last_seq_step__WIDTH 5 +#define R_SCSI1_STATUS__last_seq_step__st_bus_free 24 +#define R_SCSI1_STATUS__last_seq_step__st_arbitrate 8 +#define R_SCSI1_STATUS__last_seq_step__st_resel_req 29 +#define R_SCSI1_STATUS__last_seq_step__st_msg_1 2 +#define R_SCSI1_STATUS__last_seq_step__st_manual 28 +#define R_SCSI1_STATUS__last_seq_step__st_transf_cmd 30 +#define R_SCSI1_STATUS__last_seq_step__st_msg_2 6 +#define R_SCSI1_STATUS__last_seq_step__st_msg_3 22 +#define R_SCSI1_STATUS__last_seq_step__st_answer 3 +#define R_SCSI1_STATUS__last_seq_step__st_synch_din_perr 1 +#define R_SCSI1_STATUS__last_seq_step__st_transfer_done 15 +#define R_SCSI1_STATUS__last_seq_step__st_synch_dout 0 +#define R_SCSI1_STATUS__last_seq_step__st_asynch_dout 25 +#define R_SCSI1_STATUS__last_seq_step__st_synch_din 13 +#define R_SCSI1_STATUS__last_seq_step__st_asynch_din 9 +#define R_SCSI1_STATUS__last_seq_step__st_synch_dout_ack 4 +#define R_SCSI1_STATUS__last_seq_step__st_synch_din_ack 12 +#define R_SCSI1_STATUS__last_seq_step__st_synch_din_ack_perr 5 +#define R_SCSI1_STATUS__last_seq_step__st_asynch_dout_end 11 +#define R_SCSI1_STATUS__last_seq_step__st_iwr 27 +#define R_SCSI1_STATUS__last_seq_step__st_wait_free_disc 21 +#define R_SCSI1_STATUS__last_seq_step__st_sdp_disc 7 +#define R_SCSI1_STATUS__last_seq_step__st_cc 31 +#define R_SCSI1_STATUS__last_seq_step__st_iwr_good 14 +#define R_SCSI1_STATUS__last_seq_step__st_iwr_cc 23 +#define R_SCSI1_STATUS__last_seq_step__st_wait_free_iwr_cc 17 +#define R_SCSI1_STATUS__last_seq_step__st_wait_free_cc 20 +#define R_SCSI1_STATUS__last_seq_step__st_wait_free_sdp_disc 16 +#define R_SCSI1_STATUS__last_seq_step__st_manual_req 10 +#define R_SCSI1_STATUS__last_seq_step__st_manual_din_prot 18 +#define R_SCSI1_STATUS__valid_status__BITNR 5 +#define R_SCSI1_STATUS__valid_status__WIDTH 1 +#define R_SCSI1_STATUS__valid_status__yes 1 +#define R_SCSI1_STATUS__valid_status__no 0 +#define R_SCSI1_STATUS__seq_status__BITNR 0 +#define R_SCSI1_STATUS__seq_status__WIDTH 5 +#define R_SCSI1_STATUS__seq_status__info_seq_complete 0 +#define R_SCSI1_STATUS__seq_status__info_parity_error 1 +#define R_SCSI1_STATUS__seq_status__info_unhandled_msg_in 2 +#define R_SCSI1_STATUS__seq_status__info_unexp_ph_change 3 +#define R_SCSI1_STATUS__seq_status__info_arb_lost 4 +#define R_SCSI1_STATUS__seq_status__info_sel_timeout 5 +#define R_SCSI1_STATUS__seq_status__info_unexp_bf 6 +#define R_SCSI1_STATUS__seq_status__info_illegal_op 7 +#define R_SCSI1_STATUS__seq_status__info_rec_recvd 8 +#define R_SCSI1_STATUS__seq_status__info_reselected 9 +#define R_SCSI1_STATUS__seq_status__info_unhandled_status 10 +#define R_SCSI1_STATUS__seq_status__info_bus_reset 11 +#define R_SCSI1_STATUS__seq_status__info_illegal_bf 12 +#define R_SCSI1_STATUS__seq_status__info_bus_free 13 + +#define R_SCSI1_DATA_IN (IO_TYPECAST_RO_UWORD 0xb0000050) +#define R_SCSI1_DATA_IN__data_in__BITNR 0 +#define R_SCSI1_DATA_IN__data_in__WIDTH 16 + +/* +!* Interrupt mask and status registers +!*/ + +#define R_IRQ_MASK0_RD (IO_TYPECAST_RO_UDWORD 0xb00000c0) +#define R_IRQ_MASK0_RD__nmi_pin__BITNR 31 +#define R_IRQ_MASK0_RD__nmi_pin__WIDTH 1 +#define R_IRQ_MASK0_RD__nmi_pin__active 1 +#define R_IRQ_MASK0_RD__nmi_pin__inactive 0 +#define R_IRQ_MASK0_RD__watchdog_nmi__BITNR 30 +#define R_IRQ_MASK0_RD__watchdog_nmi__WIDTH 1 +#define R_IRQ_MASK0_RD__watchdog_nmi__active 1 +#define R_IRQ_MASK0_RD__watchdog_nmi__inactive 0 +#define R_IRQ_MASK0_RD__sqe_test_error__BITNR 29 +#define R_IRQ_MASK0_RD__sqe_test_error__WIDTH 1 +#define R_IRQ_MASK0_RD__sqe_test_error__active 1 +#define R_IRQ_MASK0_RD__sqe_test_error__inactive 0 +#define R_IRQ_MASK0_RD__carrier_loss__BITNR 28 +#define R_IRQ_MASK0_RD__carrier_loss__WIDTH 1 +#define R_IRQ_MASK0_RD__carrier_loss__active 1 +#define R_IRQ_MASK0_RD__carrier_loss__inactive 0 +#define R_IRQ_MASK0_RD__deferred__BITNR 27 +#define R_IRQ_MASK0_RD__deferred__WIDTH 1 +#define R_IRQ_MASK0_RD__deferred__active 1 +#define R_IRQ_MASK0_RD__deferred__inactive 0 +#define R_IRQ_MASK0_RD__late_col__BITNR 26 +#define R_IRQ_MASK0_RD__late_col__WIDTH 1 +#define R_IRQ_MASK0_RD__late_col__active 1 +#define R_IRQ_MASK0_RD__late_col__inactive 0 +#define R_IRQ_MASK0_RD__multiple_col__BITNR 25 +#define R_IRQ_MASK0_RD__multiple_col__WIDTH 1 +#define R_IRQ_MASK0_RD__multiple_col__active 1 +#define R_IRQ_MASK0_RD__multiple_col__inactive 0 +#define R_IRQ_MASK0_RD__single_col__BITNR 24 +#define R_IRQ_MASK0_RD__single_col__WIDTH 1 +#define R_IRQ_MASK0_RD__single_col__active 1 +#define R_IRQ_MASK0_RD__single_col__inactive 0 +#define R_IRQ_MASK0_RD__congestion__BITNR 23 +#define R_IRQ_MASK0_RD__congestion__WIDTH 1 +#define R_IRQ_MASK0_RD__congestion__active 1 +#define R_IRQ_MASK0_RD__congestion__inactive 0 +#define R_IRQ_MASK0_RD__oversize__BITNR 22 +#define R_IRQ_MASK0_RD__oversize__WIDTH 1 +#define R_IRQ_MASK0_RD__oversize__active 1 +#define R_IRQ_MASK0_RD__oversize__inactive 0 +#define R_IRQ_MASK0_RD__alignment_error__BITNR 21 +#define R_IRQ_MASK0_RD__alignment_error__WIDTH 1 +#define R_IRQ_MASK0_RD__alignment_error__active 1 +#define R_IRQ_MASK0_RD__alignment_error__inactive 0 +#define R_IRQ_MASK0_RD__crc_error__BITNR 20 +#define R_IRQ_MASK0_RD__crc_error__WIDTH 1 +#define R_IRQ_MASK0_RD__crc_error__active 1 +#define R_IRQ_MASK0_RD__crc_error__inactive 0 +#define R_IRQ_MASK0_RD__overrun__BITNR 19 +#define R_IRQ_MASK0_RD__overrun__WIDTH 1 +#define R_IRQ_MASK0_RD__overrun__active 1 +#define R_IRQ_MASK0_RD__overrun__inactive 0 +#define R_IRQ_MASK0_RD__underrun__BITNR 18 +#define R_IRQ_MASK0_RD__underrun__WIDTH 1 +#define R_IRQ_MASK0_RD__underrun__active 1 +#define R_IRQ_MASK0_RD__underrun__inactive 0 +#define R_IRQ_MASK0_RD__excessive_col__BITNR 17 +#define R_IRQ_MASK0_RD__excessive_col__WIDTH 1 +#define R_IRQ_MASK0_RD__excessive_col__active 1 +#define R_IRQ_MASK0_RD__excessive_col__inactive 0 +#define R_IRQ_MASK0_RD__mdio__BITNR 16 +#define R_IRQ_MASK0_RD__mdio__WIDTH 1 +#define R_IRQ_MASK0_RD__mdio__active 1 +#define R_IRQ_MASK0_RD__mdio__inactive 0 +#define R_IRQ_MASK0_RD__ata_drq3__BITNR 15 +#define R_IRQ_MASK0_RD__ata_drq3__WIDTH 1 +#define R_IRQ_MASK0_RD__ata_drq3__active 1 +#define R_IRQ_MASK0_RD__ata_drq3__inactive 0 +#define R_IRQ_MASK0_RD__ata_drq2__BITNR 14 +#define R_IRQ_MASK0_RD__ata_drq2__WIDTH 1 +#define R_IRQ_MASK0_RD__ata_drq2__active 1 +#define R_IRQ_MASK0_RD__ata_drq2__inactive 0 +#define R_IRQ_MASK0_RD__ata_drq1__BITNR 13 +#define R_IRQ_MASK0_RD__ata_drq1__WIDTH 1 +#define R_IRQ_MASK0_RD__ata_drq1__active 1 +#define R_IRQ_MASK0_RD__ata_drq1__inactive 0 +#define R_IRQ_MASK0_RD__ata_drq0__BITNR 12 +#define R_IRQ_MASK0_RD__ata_drq0__WIDTH 1 +#define R_IRQ_MASK0_RD__ata_drq0__active 1 +#define R_IRQ_MASK0_RD__ata_drq0__inactive 0 +#define R_IRQ_MASK0_RD__par0_ecp_cmd__BITNR 11 +#define R_IRQ_MASK0_RD__par0_ecp_cmd__WIDTH 1 +#define R_IRQ_MASK0_RD__par0_ecp_cmd__active 1 +#define R_IRQ_MASK0_RD__par0_ecp_cmd__inactive 0 +#define R_IRQ_MASK0_RD__ata_irq3__BITNR 11 +#define R_IRQ_MASK0_RD__ata_irq3__WIDTH 1 +#define R_IRQ_MASK0_RD__ata_irq3__active 1 +#define R_IRQ_MASK0_RD__ata_irq3__inactive 0 +#define R_IRQ_MASK0_RD__par0_peri__BITNR 10 +#define R_IRQ_MASK0_RD__par0_peri__WIDTH 1 +#define R_IRQ_MASK0_RD__par0_peri__active 1 +#define R_IRQ_MASK0_RD__par0_peri__inactive 0 +#define R_IRQ_MASK0_RD__ata_irq2__BITNR 10 +#define R_IRQ_MASK0_RD__ata_irq2__WIDTH 1 +#define R_IRQ_MASK0_RD__ata_irq2__active 1 +#define R_IRQ_MASK0_RD__ata_irq2__inactive 0 +#define R_IRQ_MASK0_RD__par0_data__BITNR 9 +#define R_IRQ_MASK0_RD__par0_data__WIDTH 1 +#define R_IRQ_MASK0_RD__par0_data__active 1 +#define R_IRQ_MASK0_RD__par0_data__inactive 0 +#define R_IRQ_MASK0_RD__ata_irq1__BITNR 9 +#define R_IRQ_MASK0_RD__ata_irq1__WIDTH 1 +#define R_IRQ_MASK0_RD__ata_irq1__active 1 +#define R_IRQ_MASK0_RD__ata_irq1__inactive 0 +#define R_IRQ_MASK0_RD__par0_ready__BITNR 8 +#define R_IRQ_MASK0_RD__par0_ready__WIDTH 1 +#define R_IRQ_MASK0_RD__par0_ready__active 1 +#define R_IRQ_MASK0_RD__par0_ready__inactive 0 +#define R_IRQ_MASK0_RD__ata_irq0__BITNR 8 +#define R_IRQ_MASK0_RD__ata_irq0__WIDTH 1 +#define R_IRQ_MASK0_RD__ata_irq0__active 1 +#define R_IRQ_MASK0_RD__ata_irq0__inactive 0 +#define R_IRQ_MASK0_RD__mio__BITNR 8 +#define R_IRQ_MASK0_RD__mio__WIDTH 1 +#define R_IRQ_MASK0_RD__mio__active 1 +#define R_IRQ_MASK0_RD__mio__inactive 0 +#define R_IRQ_MASK0_RD__scsi0__BITNR 8 +#define R_IRQ_MASK0_RD__scsi0__WIDTH 1 +#define R_IRQ_MASK0_RD__scsi0__active 1 +#define R_IRQ_MASK0_RD__scsi0__inactive 0 +#define R_IRQ_MASK0_RD__ata_dmaend__BITNR 7 +#define R_IRQ_MASK0_RD__ata_dmaend__WIDTH 1 +#define R_IRQ_MASK0_RD__ata_dmaend__active 1 +#define R_IRQ_MASK0_RD__ata_dmaend__inactive 0 +#define R_IRQ_MASK0_RD__irq_ext_vector_nr__BITNR 5 +#define R_IRQ_MASK0_RD__irq_ext_vector_nr__WIDTH 1 +#define R_IRQ_MASK0_RD__irq_ext_vector_nr__active 1 +#define R_IRQ_MASK0_RD__irq_ext_vector_nr__inactive 0 +#define R_IRQ_MASK0_RD__irq_int_vector_nr__BITNR 4 +#define R_IRQ_MASK0_RD__irq_int_vector_nr__WIDTH 1 +#define R_IRQ_MASK0_RD__irq_int_vector_nr__active 1 +#define R_IRQ_MASK0_RD__irq_int_vector_nr__inactive 0 +#define R_IRQ_MASK0_RD__ext_dma1__BITNR 3 +#define R_IRQ_MASK0_RD__ext_dma1__WIDTH 1 +#define R_IRQ_MASK0_RD__ext_dma1__active 1 +#define R_IRQ_MASK0_RD__ext_dma1__inactive 0 +#define R_IRQ_MASK0_RD__ext_dma0__BITNR 2 +#define R_IRQ_MASK0_RD__ext_dma0__WIDTH 1 +#define R_IRQ_MASK0_RD__ext_dma0__active 1 +#define R_IRQ_MASK0_RD__ext_dma0__inactive 0 +#define R_IRQ_MASK0_RD__timer1__BITNR 1 +#define R_IRQ_MASK0_RD__timer1__WIDTH 1 +#define R_IRQ_MASK0_RD__timer1__active 1 +#define R_IRQ_MASK0_RD__timer1__inactive 0 +#define R_IRQ_MASK0_RD__timer0__BITNR 0 +#define R_IRQ_MASK0_RD__timer0__WIDTH 1 +#define R_IRQ_MASK0_RD__timer0__active 1 +#define R_IRQ_MASK0_RD__timer0__inactive 0 + +#define R_IRQ_MASK0_CLR (IO_TYPECAST_UDWORD 0xb00000c0) +#define R_IRQ_MASK0_CLR__nmi_pin__BITNR 31 +#define R_IRQ_MASK0_CLR__nmi_pin__WIDTH 1 +#define R_IRQ_MASK0_CLR__nmi_pin__clr 1 +#define R_IRQ_MASK0_CLR__nmi_pin__nop 0 +#define R_IRQ_MASK0_CLR__watchdog_nmi__BITNR 30 +#define R_IRQ_MASK0_CLR__watchdog_nmi__WIDTH 1 +#define R_IRQ_MASK0_CLR__watchdog_nmi__clr 1 +#define R_IRQ_MASK0_CLR__watchdog_nmi__nop 0 +#define R_IRQ_MASK0_CLR__sqe_test_error__BITNR 29 +#define R_IRQ_MASK0_CLR__sqe_test_error__WIDTH 1 +#define R_IRQ_MASK0_CLR__sqe_test_error__clr 1 +#define R_IRQ_MASK0_CLR__sqe_test_error__nop 0 +#define R_IRQ_MASK0_CLR__carrier_loss__BITNR 28 +#define R_IRQ_MASK0_CLR__carrier_loss__WIDTH 1 +#define R_IRQ_MASK0_CLR__carrier_loss__clr 1 +#define R_IRQ_MASK0_CLR__carrier_loss__nop 0 +#define R_IRQ_MASK0_CLR__deferred__BITNR 27 +#define R_IRQ_MASK0_CLR__deferred__WIDTH 1 +#define R_IRQ_MASK0_CLR__deferred__clr 1 +#define R_IRQ_MASK0_CLR__deferred__nop 0 +#define R_IRQ_MASK0_CLR__late_col__BITNR 26 +#define R_IRQ_MASK0_CLR__late_col__WIDTH 1 +#define R_IRQ_MASK0_CLR__late_col__clr 1 +#define R_IRQ_MASK0_CLR__late_col__nop 0 +#define R_IRQ_MASK0_CLR__multiple_col__BITNR 25 +#define R_IRQ_MASK0_CLR__multiple_col__WIDTH 1 +#define R_IRQ_MASK0_CLR__multiple_col__clr 1 +#define R_IRQ_MASK0_CLR__multiple_col__nop 0 +#define R_IRQ_MASK0_CLR__single_col__BITNR 24 +#define R_IRQ_MASK0_CLR__single_col__WIDTH 1 +#define R_IRQ_MASK0_CLR__single_col__clr 1 +#define R_IRQ_MASK0_CLR__single_col__nop 0 +#define R_IRQ_MASK0_CLR__congestion__BITNR 23 +#define R_IRQ_MASK0_CLR__congestion__WIDTH 1 +#define R_IRQ_MASK0_CLR__congestion__clr 1 +#define R_IRQ_MASK0_CLR__congestion__nop 0 +#define R_IRQ_MASK0_CLR__oversize__BITNR 22 +#define R_IRQ_MASK0_CLR__oversize__WIDTH 1 +#define R_IRQ_MASK0_CLR__oversize__clr 1 +#define R_IRQ_MASK0_CLR__oversize__nop 0 +#define R_IRQ_MASK0_CLR__alignment_error__BITNR 21 +#define R_IRQ_MASK0_CLR__alignment_error__WIDTH 1 +#define R_IRQ_MASK0_CLR__alignment_error__clr 1 +#define R_IRQ_MASK0_CLR__alignment_error__nop 0 +#define R_IRQ_MASK0_CLR__crc_error__BITNR 20 +#define R_IRQ_MASK0_CLR__crc_error__WIDTH 1 +#define R_IRQ_MASK0_CLR__crc_error__clr 1 +#define R_IRQ_MASK0_CLR__crc_error__nop 0 +#define R_IRQ_MASK0_CLR__overrun__BITNR 19 +#define R_IRQ_MASK0_CLR__overrun__WIDTH 1 +#define R_IRQ_MASK0_CLR__overrun__clr 1 +#define R_IRQ_MASK0_CLR__overrun__nop 0 +#define R_IRQ_MASK0_CLR__underrun__BITNR 18 +#define R_IRQ_MASK0_CLR__underrun__WIDTH 1 +#define R_IRQ_MASK0_CLR__underrun__clr 1 +#define R_IRQ_MASK0_CLR__underrun__nop 0 +#define R_IRQ_MASK0_CLR__excessive_col__BITNR 17 +#define R_IRQ_MASK0_CLR__excessive_col__WIDTH 1 +#define R_IRQ_MASK0_CLR__excessive_col__clr 1 +#define R_IRQ_MASK0_CLR__excessive_col__nop 0 +#define R_IRQ_MASK0_CLR__mdio__BITNR 16 +#define R_IRQ_MASK0_CLR__mdio__WIDTH 1 +#define R_IRQ_MASK0_CLR__mdio__clr 1 +#define R_IRQ_MASK0_CLR__mdio__nop 0 +#define R_IRQ_MASK0_CLR__ata_drq3__BITNR 15 +#define R_IRQ_MASK0_CLR__ata_drq3__WIDTH 1 +#define R_IRQ_MASK0_CLR__ata_drq3__clr 1 +#define R_IRQ_MASK0_CLR__ata_drq3__nop 0 +#define R_IRQ_MASK0_CLR__ata_drq2__BITNR 14 +#define R_IRQ_MASK0_CLR__ata_drq2__WIDTH 1 +#define R_IRQ_MASK0_CLR__ata_drq2__clr 1 +#define R_IRQ_MASK0_CLR__ata_drq2__nop 0 +#define R_IRQ_MASK0_CLR__ata_drq1__BITNR 13 +#define R_IRQ_MASK0_CLR__ata_drq1__WIDTH 1 +#define R_IRQ_MASK0_CLR__ata_drq1__clr 1 +#define R_IRQ_MASK0_CLR__ata_drq1__nop 0 +#define R_IRQ_MASK0_CLR__ata_drq0__BITNR 12 +#define R_IRQ_MASK0_CLR__ata_drq0__WIDTH 1 +#define R_IRQ_MASK0_CLR__ata_drq0__clr 1 +#define R_IRQ_MASK0_CLR__ata_drq0__nop 0 +#define R_IRQ_MASK0_CLR__par0_ecp_cmd__BITNR 11 +#define R_IRQ_MASK0_CLR__par0_ecp_cmd__WIDTH 1 +#define R_IRQ_MASK0_CLR__par0_ecp_cmd__clr 1 +#define R_IRQ_MASK0_CLR__par0_ecp_cmd__nop 0 +#define R_IRQ_MASK0_CLR__ata_irq3__BITNR 11 +#define R_IRQ_MASK0_CLR__ata_irq3__WIDTH 1 +#define R_IRQ_MASK0_CLR__ata_irq3__clr 1 +#define R_IRQ_MASK0_CLR__ata_irq3__nop 0 +#define R_IRQ_MASK0_CLR__par0_peri__BITNR 10 +#define R_IRQ_MASK0_CLR__par0_peri__WIDTH 1 +#define R_IRQ_MASK0_CLR__par0_peri__clr 1 +#define R_IRQ_MASK0_CLR__par0_peri__nop 0 +#define R_IRQ_MASK0_CLR__ata_irq2__BITNR 10 +#define R_IRQ_MASK0_CLR__ata_irq2__WIDTH 1 +#define R_IRQ_MASK0_CLR__ata_irq2__clr 1 +#define R_IRQ_MASK0_CLR__ata_irq2__nop 0 +#define R_IRQ_MASK0_CLR__par0_data__BITNR 9 +#define R_IRQ_MASK0_CLR__par0_data__WIDTH 1 +#define R_IRQ_MASK0_CLR__par0_data__clr 1 +#define R_IRQ_MASK0_CLR__par0_data__nop 0 +#define R_IRQ_MASK0_CLR__ata_irq1__BITNR 9 +#define R_IRQ_MASK0_CLR__ata_irq1__WIDTH 1 +#define R_IRQ_MASK0_CLR__ata_irq1__clr 1 +#define R_IRQ_MASK0_CLR__ata_irq1__nop 0 +#define R_IRQ_MASK0_CLR__par0_ready__BITNR 8 +#define R_IRQ_MASK0_CLR__par0_ready__WIDTH 1 +#define R_IRQ_MASK0_CLR__par0_ready__clr 1 +#define R_IRQ_MASK0_CLR__par0_ready__nop 0 +#define R_IRQ_MASK0_CLR__ata_irq0__BITNR 8 +#define R_IRQ_MASK0_CLR__ata_irq0__WIDTH 1 +#define R_IRQ_MASK0_CLR__ata_irq0__clr 1 +#define R_IRQ_MASK0_CLR__ata_irq0__nop 0 +#define R_IRQ_MASK0_CLR__mio__BITNR 8 +#define R_IRQ_MASK0_CLR__mio__WIDTH 1 +#define R_IRQ_MASK0_CLR__mio__clr 1 +#define R_IRQ_MASK0_CLR__mio__nop 0 +#define R_IRQ_MASK0_CLR__scsi0__BITNR 8 +#define R_IRQ_MASK0_CLR__scsi0__WIDTH 1 +#define R_IRQ_MASK0_CLR__scsi0__clr 1 +#define R_IRQ_MASK0_CLR__scsi0__nop 0 +#define R_IRQ_MASK0_CLR__ata_dmaend__BITNR 7 +#define R_IRQ_MASK0_CLR__ata_dmaend__WIDTH 1 +#define R_IRQ_MASK0_CLR__ata_dmaend__clr 1 +#define R_IRQ_MASK0_CLR__ata_dmaend__nop 0 +#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__BITNR 5 +#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__WIDTH 1 +#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__clr 1 +#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__nop 0 +#define R_IRQ_MASK0_CLR__irq_int_vector_nr__BITNR 4 +#define R_IRQ_MASK0_CLR__irq_int_vector_nr__WIDTH 1 +#define R_IRQ_MASK0_CLR__irq_int_vector_nr__clr 1 +#define R_IRQ_MASK0_CLR__irq_int_vector_nr__nop 0 +#define R_IRQ_MASK0_CLR__ext_dma1__BITNR 3 +#define R_IRQ_MASK0_CLR__ext_dma1__WIDTH 1 +#define R_IRQ_MASK0_CLR__ext_dma1__clr 1 +#define R_IRQ_MASK0_CLR__ext_dma1__nop 0 +#define R_IRQ_MASK0_CLR__ext_dma0__BITNR 2 +#define R_IRQ_MASK0_CLR__ext_dma0__WIDTH 1 +#define R_IRQ_MASK0_CLR__ext_dma0__clr 1 +#define R_IRQ_MASK0_CLR__ext_dma0__nop 0 +#define R_IRQ_MASK0_CLR__timer1__BITNR 1 +#define R_IRQ_MASK0_CLR__timer1__WIDTH 1 +#define R_IRQ_MASK0_CLR__timer1__clr 1 +#define R_IRQ_MASK0_CLR__timer1__nop 0 +#define R_IRQ_MASK0_CLR__timer0__BITNR 0 +#define R_IRQ_MASK0_CLR__timer0__WIDTH 1 +#define R_IRQ_MASK0_CLR__timer0__clr 1 +#define R_IRQ_MASK0_CLR__timer0__nop 0 + +#define R_IRQ_READ0 (IO_TYPECAST_RO_UDWORD 0xb00000c4) +#define R_IRQ_READ0__nmi_pin__BITNR 31 +#define R_IRQ_READ0__nmi_pin__WIDTH 1 +#define R_IRQ_READ0__nmi_pin__active 1 +#define R_IRQ_READ0__nmi_pin__inactive 0 +#define R_IRQ_READ0__watchdog_nmi__BITNR 30 +#define R_IRQ_READ0__watchdog_nmi__WIDTH 1 +#define R_IRQ_READ0__watchdog_nmi__active 1 +#define R_IRQ_READ0__watchdog_nmi__inactive 0 +#define R_IRQ_READ0__sqe_test_error__BITNR 29 +#define R_IRQ_READ0__sqe_test_error__WIDTH 1 +#define R_IRQ_READ0__sqe_test_error__active 1 +#define R_IRQ_READ0__sqe_test_error__inactive 0 +#define R_IRQ_READ0__carrier_loss__BITNR 28 +#define R_IRQ_READ0__carrier_loss__WIDTH 1 +#define R_IRQ_READ0__carrier_loss__active 1 +#define R_IRQ_READ0__carrier_loss__inactive 0 +#define R_IRQ_READ0__deferred__BITNR 27 +#define R_IRQ_READ0__deferred__WIDTH 1 +#define R_IRQ_READ0__deferred__active 1 +#define R_IRQ_READ0__deferred__inactive 0 +#define R_IRQ_READ0__late_col__BITNR 26 +#define R_IRQ_READ0__late_col__WIDTH 1 +#define R_IRQ_READ0__late_col__active 1 +#define R_IRQ_READ0__late_col__inactive 0 +#define R_IRQ_READ0__multiple_col__BITNR 25 +#define R_IRQ_READ0__multiple_col__WIDTH 1 +#define R_IRQ_READ0__multiple_col__active 1 +#define R_IRQ_READ0__multiple_col__inactive 0 +#define R_IRQ_READ0__single_col__BITNR 24 +#define R_IRQ_READ0__single_col__WIDTH 1 +#define R_IRQ_READ0__single_col__active 1 +#define R_IRQ_READ0__single_col__inactive 0 +#define R_IRQ_READ0__congestion__BITNR 23 +#define R_IRQ_READ0__congestion__WIDTH 1 +#define R_IRQ_READ0__congestion__active 1 +#define R_IRQ_READ0__congestion__inactive 0 +#define R_IRQ_READ0__oversize__BITNR 22 +#define R_IRQ_READ0__oversize__WIDTH 1 +#define R_IRQ_READ0__oversize__active 1 +#define R_IRQ_READ0__oversize__inactive 0 +#define R_IRQ_READ0__alignment_error__BITNR 21 +#define R_IRQ_READ0__alignment_error__WIDTH 1 +#define R_IRQ_READ0__alignment_error__active 1 +#define R_IRQ_READ0__alignment_error__inactive 0 +#define R_IRQ_READ0__crc_error__BITNR 20 +#define R_IRQ_READ0__crc_error__WIDTH 1 +#define R_IRQ_READ0__crc_error__active 1 +#define R_IRQ_READ0__crc_error__inactive 0 +#define R_IRQ_READ0__overrun__BITNR 19 +#define R_IRQ_READ0__overrun__WIDTH 1 +#define R_IRQ_READ0__overrun__active 1 +#define R_IRQ_READ0__overrun__inactive 0 +#define R_IRQ_READ0__underrun__BITNR 18 +#define R_IRQ_READ0__underrun__WIDTH 1 +#define R_IRQ_READ0__underrun__active 1 +#define R_IRQ_READ0__underrun__inactive 0 +#define R_IRQ_READ0__excessive_col__BITNR 17 +#define R_IRQ_READ0__excessive_col__WIDTH 1 +#define R_IRQ_READ0__excessive_col__active 1 +#define R_IRQ_READ0__excessive_col__inactive 0 +#define R_IRQ_READ0__mdio__BITNR 16 +#define R_IRQ_READ0__mdio__WIDTH 1 +#define R_IRQ_READ0__mdio__active 1 +#define R_IRQ_READ0__mdio__inactive 0 +#define R_IRQ_READ0__ata_drq3__BITNR 15 +#define R_IRQ_READ0__ata_drq3__WIDTH 1 +#define R_IRQ_READ0__ata_drq3__active 1 +#define R_IRQ_READ0__ata_drq3__inactive 0 +#define R_IRQ_READ0__ata_drq2__BITNR 14 +#define R_IRQ_READ0__ata_drq2__WIDTH 1 +#define R_IRQ_READ0__ata_drq2__active 1 +#define R_IRQ_READ0__ata_drq2__inactive 0 +#define R_IRQ_READ0__ata_drq1__BITNR 13 +#define R_IRQ_READ0__ata_drq1__WIDTH 1 +#define R_IRQ_READ0__ata_drq1__active 1 +#define R_IRQ_READ0__ata_drq1__inactive 0 +#define R_IRQ_READ0__ata_drq0__BITNR 12 +#define R_IRQ_READ0__ata_drq0__WIDTH 1 +#define R_IRQ_READ0__ata_drq0__active 1 +#define R_IRQ_READ0__ata_drq0__inactive 0 +#define R_IRQ_READ0__par0_ecp_cmd__BITNR 11 +#define R_IRQ_READ0__par0_ecp_cmd__WIDTH 1 +#define R_IRQ_READ0__par0_ecp_cmd__active 1 +#define R_IRQ_READ0__par0_ecp_cmd__inactive 0 +#define R_IRQ_READ0__ata_irq3__BITNR 11 +#define R_IRQ_READ0__ata_irq3__WIDTH 1 +#define R_IRQ_READ0__ata_irq3__active 1 +#define R_IRQ_READ0__ata_irq3__inactive 0 +#define R_IRQ_READ0__par0_peri__BITNR 10 +#define R_IRQ_READ0__par0_peri__WIDTH 1 +#define R_IRQ_READ0__par0_peri__active 1 +#define R_IRQ_READ0__par0_peri__inactive 0 +#define R_IRQ_READ0__ata_irq2__BITNR 10 +#define R_IRQ_READ0__ata_irq2__WIDTH 1 +#define R_IRQ_READ0__ata_irq2__active 1 +#define R_IRQ_READ0__ata_irq2__inactive 0 +#define R_IRQ_READ0__par0_data__BITNR 9 +#define R_IRQ_READ0__par0_data__WIDTH 1 +#define R_IRQ_READ0__par0_data__active 1 +#define R_IRQ_READ0__par0_data__inactive 0 +#define R_IRQ_READ0__ata_irq1__BITNR 9 +#define R_IRQ_READ0__ata_irq1__WIDTH 1 +#define R_IRQ_READ0__ata_irq1__active 1 +#define R_IRQ_READ0__ata_irq1__inactive 0 +#define R_IRQ_READ0__par0_ready__BITNR 8 +#define R_IRQ_READ0__par0_ready__WIDTH 1 +#define R_IRQ_READ0__par0_ready__active 1 +#define R_IRQ_READ0__par0_ready__inactive 0 +#define R_IRQ_READ0__ata_irq0__BITNR 8 +#define R_IRQ_READ0__ata_irq0__WIDTH 1 +#define R_IRQ_READ0__ata_irq0__active 1 +#define R_IRQ_READ0__ata_irq0__inactive 0 +#define R_IRQ_READ0__mio__BITNR 8 +#define R_IRQ_READ0__mio__WIDTH 1 +#define R_IRQ_READ0__mio__active 1 +#define R_IRQ_READ0__mio__inactive 0 +#define R_IRQ_READ0__scsi0__BITNR 8 +#define R_IRQ_READ0__scsi0__WIDTH 1 +#define R_IRQ_READ0__scsi0__active 1 +#define R_IRQ_READ0__scsi0__inactive 0 +#define R_IRQ_READ0__ata_dmaend__BITNR 7 +#define R_IRQ_READ0__ata_dmaend__WIDTH 1 +#define R_IRQ_READ0__ata_dmaend__active 1 +#define R_IRQ_READ0__ata_dmaend__inactive 0 +#define R_IRQ_READ0__irq_ext_vector_nr__BITNR 5 +#define R_IRQ_READ0__irq_ext_vector_nr__WIDTH 1 +#define R_IRQ_READ0__irq_ext_vector_nr__active 1 +#define R_IRQ_READ0__irq_ext_vector_nr__inactive 0 +#define R_IRQ_READ0__irq_int_vector_nr__BITNR 4 +#define R_IRQ_READ0__irq_int_vector_nr__WIDTH 1 +#define R_IRQ_READ0__irq_int_vector_nr__active 1 +#define R_IRQ_READ0__irq_int_vector_nr__inactive 0 +#define R_IRQ_READ0__ext_dma1__BITNR 3 +#define R_IRQ_READ0__ext_dma1__WIDTH 1 +#define R_IRQ_READ0__ext_dma1__active 1 +#define R_IRQ_READ0__ext_dma1__inactive 0 +#define R_IRQ_READ0__ext_dma0__BITNR 2 +#define R_IRQ_READ0__ext_dma0__WIDTH 1 +#define R_IRQ_READ0__ext_dma0__active 1 +#define R_IRQ_READ0__ext_dma0__inactive 0 +#define R_IRQ_READ0__timer1__BITNR 1 +#define R_IRQ_READ0__timer1__WIDTH 1 +#define R_IRQ_READ0__timer1__active 1 +#define R_IRQ_READ0__timer1__inactive 0 +#define R_IRQ_READ0__timer0__BITNR 0 +#define R_IRQ_READ0__timer0__WIDTH 1 +#define R_IRQ_READ0__timer0__active 1 +#define R_IRQ_READ0__timer0__inactive 0 + +#define R_IRQ_MASK0_SET (IO_TYPECAST_UDWORD 0xb00000c4) +#define R_IRQ_MASK0_SET__nmi_pin__BITNR 31 +#define R_IRQ_MASK0_SET__nmi_pin__WIDTH 1 +#define R_IRQ_MASK0_SET__nmi_pin__set 1 +#define R_IRQ_MASK0_SET__nmi_pin__nop 0 +#define R_IRQ_MASK0_SET__watchdog_nmi__BITNR 30 +#define R_IRQ_MASK0_SET__watchdog_nmi__WIDTH 1 +#define R_IRQ_MASK0_SET__watchdog_nmi__set 1 +#define R_IRQ_MASK0_SET__watchdog_nmi__nop 0 +#define R_IRQ_MASK0_SET__sqe_test_error__BITNR 29 +#define R_IRQ_MASK0_SET__sqe_test_error__WIDTH 1 +#define R_IRQ_MASK0_SET__sqe_test_error__set 1 +#define R_IRQ_MASK0_SET__sqe_test_error__nop 0 +#define R_IRQ_MASK0_SET__carrier_loss__BITNR 28 +#define R_IRQ_MASK0_SET__carrier_loss__WIDTH 1 +#define R_IRQ_MASK0_SET__carrier_loss__set 1 +#define R_IRQ_MASK0_SET__carrier_loss__nop 0 +#define R_IRQ_MASK0_SET__deferred__BITNR 27 +#define R_IRQ_MASK0_SET__deferred__WIDTH 1 +#define R_IRQ_MASK0_SET__deferred__set 1 +#define R_IRQ_MASK0_SET__deferred__nop 0 +#define R_IRQ_MASK0_SET__late_col__BITNR 26 +#define R_IRQ_MASK0_SET__late_col__WIDTH 1 +#define R_IRQ_MASK0_SET__late_col__set 1 +#define R_IRQ_MASK0_SET__late_col__nop 0 +#define R_IRQ_MASK0_SET__multiple_col__BITNR 25 +#define R_IRQ_MASK0_SET__multiple_col__WIDTH 1 +#define R_IRQ_MASK0_SET__multiple_col__set 1 +#define R_IRQ_MASK0_SET__multiple_col__nop 0 +#define R_IRQ_MASK0_SET__single_col__BITNR 24 +#define R_IRQ_MASK0_SET__single_col__WIDTH 1 +#define R_IRQ_MASK0_SET__single_col__set 1 +#define R_IRQ_MASK0_SET__single_col__nop 0 +#define R_IRQ_MASK0_SET__congestion__BITNR 23 +#define R_IRQ_MASK0_SET__congestion__WIDTH 1 +#define R_IRQ_MASK0_SET__congestion__set 1 +#define R_IRQ_MASK0_SET__congestion__nop 0 +#define R_IRQ_MASK0_SET__oversize__BITNR 22 +#define R_IRQ_MASK0_SET__oversize__WIDTH 1 +#define R_IRQ_MASK0_SET__oversize__set 1 +#define R_IRQ_MASK0_SET__oversize__nop 0 +#define R_IRQ_MASK0_SET__alignment_error__BITNR 21 +#define R_IRQ_MASK0_SET__alignment_error__WIDTH 1 +#define R_IRQ_MASK0_SET__alignment_error__set 1 +#define R_IRQ_MASK0_SET__alignment_error__nop 0 +#define R_IRQ_MASK0_SET__crc_error__BITNR 20 +#define R_IRQ_MASK0_SET__crc_error__WIDTH 1 +#define R_IRQ_MASK0_SET__crc_error__set 1 +#define R_IRQ_MASK0_SET__crc_error__nop 0 +#define R_IRQ_MASK0_SET__overrun__BITNR 19 +#define R_IRQ_MASK0_SET__overrun__WIDTH 1 +#define R_IRQ_MASK0_SET__overrun__set 1 +#define R_IRQ_MASK0_SET__overrun__nop 0 +#define R_IRQ_MASK0_SET__underrun__BITNR 18 +#define R_IRQ_MASK0_SET__underrun__WIDTH 1 +#define R_IRQ_MASK0_SET__underrun__set 1 +#define R_IRQ_MASK0_SET__underrun__nop 0 +#define R_IRQ_MASK0_SET__excessive_col__BITNR 17 +#define R_IRQ_MASK0_SET__excessive_col__WIDTH 1 +#define R_IRQ_MASK0_SET__excessive_col__set 1 +#define R_IRQ_MASK0_SET__excessive_col__nop 0 +#define R_IRQ_MASK0_SET__mdio__BITNR 16 +#define R_IRQ_MASK0_SET__mdio__WIDTH 1 +#define R_IRQ_MASK0_SET__mdio__set 1 +#define R_IRQ_MASK0_SET__mdio__nop 0 +#define R_IRQ_MASK0_SET__ata_drq3__BITNR 15 +#define R_IRQ_MASK0_SET__ata_drq3__WIDTH 1 +#define R_IRQ_MASK0_SET__ata_drq3__set 1 +#define R_IRQ_MASK0_SET__ata_drq3__nop 0 +#define R_IRQ_MASK0_SET__ata_drq2__BITNR 14 +#define R_IRQ_MASK0_SET__ata_drq2__WIDTH 1 +#define R_IRQ_MASK0_SET__ata_drq2__set 1 +#define R_IRQ_MASK0_SET__ata_drq2__nop 0 +#define R_IRQ_MASK0_SET__ata_drq1__BITNR 13 +#define R_IRQ_MASK0_SET__ata_drq1__WIDTH 1 +#define R_IRQ_MASK0_SET__ata_drq1__set 1 +#define R_IRQ_MASK0_SET__ata_drq1__nop 0 +#define R_IRQ_MASK0_SET__ata_drq0__BITNR 12 +#define R_IRQ_MASK0_SET__ata_drq0__WIDTH 1 +#define R_IRQ_MASK0_SET__ata_drq0__set 1 +#define R_IRQ_MASK0_SET__ata_drq0__nop 0 +#define R_IRQ_MASK0_SET__par0_ecp_cmd__BITNR 11 +#define R_IRQ_MASK0_SET__par0_ecp_cmd__WIDTH 1 +#define R_IRQ_MASK0_SET__par0_ecp_cmd__set 1 +#define R_IRQ_MASK0_SET__par0_ecp_cmd__nop 0 +#define R_IRQ_MASK0_SET__ata_irq3__BITNR 11 +#define R_IRQ_MASK0_SET__ata_irq3__WIDTH 1 +#define R_IRQ_MASK0_SET__ata_irq3__set 1 +#define R_IRQ_MASK0_SET__ata_irq3__nop 0 +#define R_IRQ_MASK0_SET__par0_peri__BITNR 10 +#define R_IRQ_MASK0_SET__par0_peri__WIDTH 1 +#define R_IRQ_MASK0_SET__par0_peri__set 1 +#define R_IRQ_MASK0_SET__par0_peri__nop 0 +#define R_IRQ_MASK0_SET__ata_irq2__BITNR 10 +#define R_IRQ_MASK0_SET__ata_irq2__WIDTH 1 +#define R_IRQ_MASK0_SET__ata_irq2__set 1 +#define R_IRQ_MASK0_SET__ata_irq2__nop 0 +#define R_IRQ_MASK0_SET__par0_data__BITNR 9 +#define R_IRQ_MASK0_SET__par0_data__WIDTH 1 +#define R_IRQ_MASK0_SET__par0_data__set 1 +#define R_IRQ_MASK0_SET__par0_data__nop 0 +#define R_IRQ_MASK0_SET__ata_irq1__BITNR 9 +#define R_IRQ_MASK0_SET__ata_irq1__WIDTH 1 +#define R_IRQ_MASK0_SET__ata_irq1__set 1 +#define R_IRQ_MASK0_SET__ata_irq1__nop 0 +#define R_IRQ_MASK0_SET__par0_ready__BITNR 8 +#define R_IRQ_MASK0_SET__par0_ready__WIDTH 1 +#define R_IRQ_MASK0_SET__par0_ready__set 1 +#define R_IRQ_MASK0_SET__par0_ready__nop 0 +#define R_IRQ_MASK0_SET__ata_irq0__BITNR 8 +#define R_IRQ_MASK0_SET__ata_irq0__WIDTH 1 +#define R_IRQ_MASK0_SET__ata_irq0__set 1 +#define R_IRQ_MASK0_SET__ata_irq0__nop 0 +#define R_IRQ_MASK0_SET__mio__BITNR 8 +#define R_IRQ_MASK0_SET__mio__WIDTH 1 +#define R_IRQ_MASK0_SET__mio__set 1 +#define R_IRQ_MASK0_SET__mio__nop 0 +#define R_IRQ_MASK0_SET__scsi0__BITNR 8 +#define R_IRQ_MASK0_SET__scsi0__WIDTH 1 +#define R_IRQ_MASK0_SET__scsi0__set 1 +#define R_IRQ_MASK0_SET__scsi0__nop 0 +#define R_IRQ_MASK0_SET__ata_dmaend__BITNR 7 +#define R_IRQ_MASK0_SET__ata_dmaend__WIDTH 1 +#define R_IRQ_MASK0_SET__ata_dmaend__set 1 +#define R_IRQ_MASK0_SET__ata_dmaend__nop 0 +#define R_IRQ_MASK0_SET__irq_ext_vector_nr__BITNR 5 +#define R_IRQ_MASK0_SET__irq_ext_vector_nr__WIDTH 1 +#define R_IRQ_MASK0_SET__irq_ext_vector_nr__set 1 +#define R_IRQ_MASK0_SET__irq_ext_vector_nr__nop 0 +#define R_IRQ_MASK0_SET__irq_int_vector_nr__BITNR 4 +#define R_IRQ_MASK0_SET__irq_int_vector_nr__WIDTH 1 +#define R_IRQ_MASK0_SET__irq_int_vector_nr__set 1 +#define R_IRQ_MASK0_SET__irq_int_vector_nr__nop 0 +#define R_IRQ_MASK0_SET__ext_dma1__BITNR 3 +#define R_IRQ_MASK0_SET__ext_dma1__WIDTH 1 +#define R_IRQ_MASK0_SET__ext_dma1__set 1 +#define R_IRQ_MASK0_SET__ext_dma1__nop 0 +#define R_IRQ_MASK0_SET__ext_dma0__BITNR 2 +#define R_IRQ_MASK0_SET__ext_dma0__WIDTH 1 +#define R_IRQ_MASK0_SET__ext_dma0__set 1 +#define R_IRQ_MASK0_SET__ext_dma0__nop 0 +#define R_IRQ_MASK0_SET__timer1__BITNR 1 +#define R_IRQ_MASK0_SET__timer1__WIDTH 1 +#define R_IRQ_MASK0_SET__timer1__set 1 +#define R_IRQ_MASK0_SET__timer1__nop 0 +#define R_IRQ_MASK0_SET__timer0__BITNR 0 +#define R_IRQ_MASK0_SET__timer0__WIDTH 1 +#define R_IRQ_MASK0_SET__timer0__set 1 +#define R_IRQ_MASK0_SET__timer0__nop 0 + +#define R_IRQ_MASK1_RD (IO_TYPECAST_RO_UDWORD 0xb00000c8) +#define R_IRQ_MASK1_RD__sw_int7__BITNR 31 +#define R_IRQ_MASK1_RD__sw_int7__WIDTH 1 +#define R_IRQ_MASK1_RD__sw_int7__active 1 +#define R_IRQ_MASK1_RD__sw_int7__inactive 0 +#define R_IRQ_MASK1_RD__sw_int6__BITNR 30 +#define R_IRQ_MASK1_RD__sw_int6__WIDTH 1 +#define R_IRQ_MASK1_RD__sw_int6__active 1 +#define R_IRQ_MASK1_RD__sw_int6__inactive 0 +#define R_IRQ_MASK1_RD__sw_int5__BITNR 29 +#define R_IRQ_MASK1_RD__sw_int5__WIDTH 1 +#define R_IRQ_MASK1_RD__sw_int5__active 1 +#define R_IRQ_MASK1_RD__sw_int5__inactive 0 +#define R_IRQ_MASK1_RD__sw_int4__BITNR 28 +#define R_IRQ_MASK1_RD__sw_int4__WIDTH 1 +#define R_IRQ_MASK1_RD__sw_int4__active 1 +#define R_IRQ_MASK1_RD__sw_int4__inactive 0 +#define R_IRQ_MASK1_RD__sw_int3__BITNR 27 +#define R_IRQ_MASK1_RD__sw_int3__WIDTH 1 +#define R_IRQ_MASK1_RD__sw_int3__active 1 +#define R_IRQ_MASK1_RD__sw_int3__inactive 0 +#define R_IRQ_MASK1_RD__sw_int2__BITNR 26 +#define R_IRQ_MASK1_RD__sw_int2__WIDTH 1 +#define R_IRQ_MASK1_RD__sw_int2__active 1 +#define R_IRQ_MASK1_RD__sw_int2__inactive 0 +#define R_IRQ_MASK1_RD__sw_int1__BITNR 25 +#define R_IRQ_MASK1_RD__sw_int1__WIDTH 1 +#define R_IRQ_MASK1_RD__sw_int1__active 1 +#define R_IRQ_MASK1_RD__sw_int1__inactive 0 +#define R_IRQ_MASK1_RD__sw_int0__BITNR 24 +#define R_IRQ_MASK1_RD__sw_int0__WIDTH 1 +#define R_IRQ_MASK1_RD__sw_int0__active 1 +#define R_IRQ_MASK1_RD__sw_int0__inactive 0 +#define R_IRQ_MASK1_RD__par1_ecp_cmd__BITNR 19 +#define R_IRQ_MASK1_RD__par1_ecp_cmd__WIDTH 1 +#define R_IRQ_MASK1_RD__par1_ecp_cmd__active 1 +#define R_IRQ_MASK1_RD__par1_ecp_cmd__inactive 0 +#define R_IRQ_MASK1_RD__par1_peri__BITNR 18 +#define R_IRQ_MASK1_RD__par1_peri__WIDTH 1 +#define R_IRQ_MASK1_RD__par1_peri__active 1 +#define R_IRQ_MASK1_RD__par1_peri__inactive 0 +#define R_IRQ_MASK1_RD__par1_data__BITNR 17 +#define R_IRQ_MASK1_RD__par1_data__WIDTH 1 +#define R_IRQ_MASK1_RD__par1_data__active 1 +#define R_IRQ_MASK1_RD__par1_data__inactive 0 +#define R_IRQ_MASK1_RD__par1_ready__BITNR 16 +#define R_IRQ_MASK1_RD__par1_ready__WIDTH 1 +#define R_IRQ_MASK1_RD__par1_ready__active 1 +#define R_IRQ_MASK1_RD__par1_ready__inactive 0 +#define R_IRQ_MASK1_RD__scsi1__BITNR 16 +#define R_IRQ_MASK1_RD__scsi1__WIDTH 1 +#define R_IRQ_MASK1_RD__scsi1__active 1 +#define R_IRQ_MASK1_RD__scsi1__inactive 0 +#define R_IRQ_MASK1_RD__ser3_ready__BITNR 15 +#define R_IRQ_MASK1_RD__ser3_ready__WIDTH 1 +#define R_IRQ_MASK1_RD__ser3_ready__active 1 +#define R_IRQ_MASK1_RD__ser3_ready__inactive 0 +#define R_IRQ_MASK1_RD__ser3_data__BITNR 14 +#define R_IRQ_MASK1_RD__ser3_data__WIDTH 1 +#define R_IRQ_MASK1_RD__ser3_data__active 1 +#define R_IRQ_MASK1_RD__ser3_data__inactive 0 +#define R_IRQ_MASK1_RD__ser2_ready__BITNR 13 +#define R_IRQ_MASK1_RD__ser2_ready__WIDTH 1 +#define R_IRQ_MASK1_RD__ser2_ready__active 1 +#define R_IRQ_MASK1_RD__ser2_ready__inactive 0 +#define R_IRQ_MASK1_RD__ser2_data__BITNR 12 +#define R_IRQ_MASK1_RD__ser2_data__WIDTH 1 +#define R_IRQ_MASK1_RD__ser2_data__active 1 +#define R_IRQ_MASK1_RD__ser2_data__inactive 0 +#define R_IRQ_MASK1_RD__ser1_ready__BITNR 11 +#define R_IRQ_MASK1_RD__ser1_ready__WIDTH 1 +#define R_IRQ_MASK1_RD__ser1_ready__active 1 +#define R_IRQ_MASK1_RD__ser1_ready__inactive 0 +#define R_IRQ_MASK1_RD__ser1_data__BITNR 10 +#define R_IRQ_MASK1_RD__ser1_data__WIDTH 1 +#define R_IRQ_MASK1_RD__ser1_data__active 1 +#define R_IRQ_MASK1_RD__ser1_data__inactive 0 +#define R_IRQ_MASK1_RD__ser0_ready__BITNR 9 +#define R_IRQ_MASK1_RD__ser0_ready__WIDTH 1 +#define R_IRQ_MASK1_RD__ser0_ready__active 1 +#define R_IRQ_MASK1_RD__ser0_ready__inactive 0 +#define R_IRQ_MASK1_RD__ser0_data__BITNR 8 +#define R_IRQ_MASK1_RD__ser0_data__WIDTH 1 +#define R_IRQ_MASK1_RD__ser0_data__active 1 +#define R_IRQ_MASK1_RD__ser0_data__inactive 0 +#define R_IRQ_MASK1_RD__pa7__BITNR 7 +#define R_IRQ_MASK1_RD__pa7__WIDTH 1 +#define R_IRQ_MASK1_RD__pa7__active 1 +#define R_IRQ_MASK1_RD__pa7__inactive 0 +#define R_IRQ_MASK1_RD__pa6__BITNR 6 +#define R_IRQ_MASK1_RD__pa6__WIDTH 1 +#define R_IRQ_MASK1_RD__pa6__active 1 +#define R_IRQ_MASK1_RD__pa6__inactive 0 +#define R_IRQ_MASK1_RD__pa5__BITNR 5 +#define R_IRQ_MASK1_RD__pa5__WIDTH 1 +#define R_IRQ_MASK1_RD__pa5__active 1 +#define R_IRQ_MASK1_RD__pa5__inactive 0 +#define R_IRQ_MASK1_RD__pa4__BITNR 4 +#define R_IRQ_MASK1_RD__pa4__WIDTH 1 +#define R_IRQ_MASK1_RD__pa4__active 1 +#define R_IRQ_MASK1_RD__pa4__inactive 0 +#define R_IRQ_MASK1_RD__pa3__BITNR 3 +#define R_IRQ_MASK1_RD__pa3__WIDTH 1 +#define R_IRQ_MASK1_RD__pa3__active 1 +#define R_IRQ_MASK1_RD__pa3__inactive 0 +#define R_IRQ_MASK1_RD__pa2__BITNR 2 +#define R_IRQ_MASK1_RD__pa2__WIDTH 1 +#define R_IRQ_MASK1_RD__pa2__active 1 +#define R_IRQ_MASK1_RD__pa2__inactive 0 +#define R_IRQ_MASK1_RD__pa1__BITNR 1 +#define R_IRQ_MASK1_RD__pa1__WIDTH 1 +#define R_IRQ_MASK1_RD__pa1__active 1 +#define R_IRQ_MASK1_RD__pa1__inactive 0 +#define R_IRQ_MASK1_RD__pa0__BITNR 0 +#define R_IRQ_MASK1_RD__pa0__WIDTH 1 +#define R_IRQ_MASK1_RD__pa0__active 1 +#define R_IRQ_MASK1_RD__pa0__inactive 0 + +#define R_IRQ_MASK1_CLR (IO_TYPECAST_UDWORD 0xb00000c8) +#define R_IRQ_MASK1_CLR__sw_int7__BITNR 31 +#define R_IRQ_MASK1_CLR__sw_int7__WIDTH 1 +#define R_IRQ_MASK1_CLR__sw_int7__clr 1 +#define R_IRQ_MASK1_CLR__sw_int7__nop 0 +#define R_IRQ_MASK1_CLR__sw_int6__BITNR 30 +#define R_IRQ_MASK1_CLR__sw_int6__WIDTH 1 +#define R_IRQ_MASK1_CLR__sw_int6__clr 1 +#define R_IRQ_MASK1_CLR__sw_int6__nop 0 +#define R_IRQ_MASK1_CLR__sw_int5__BITNR 29 +#define R_IRQ_MASK1_CLR__sw_int5__WIDTH 1 +#define R_IRQ_MASK1_CLR__sw_int5__clr 1 +#define R_IRQ_MASK1_CLR__sw_int5__nop 0 +#define R_IRQ_MASK1_CLR__sw_int4__BITNR 28 +#define R_IRQ_MASK1_CLR__sw_int4__WIDTH 1 +#define R_IRQ_MASK1_CLR__sw_int4__clr 1 +#define R_IRQ_MASK1_CLR__sw_int4__nop 0 +#define R_IRQ_MASK1_CLR__sw_int3__BITNR 27 +#define R_IRQ_MASK1_CLR__sw_int3__WIDTH 1 +#define R_IRQ_MASK1_CLR__sw_int3__clr 1 +#define R_IRQ_MASK1_CLR__sw_int3__nop 0 +#define R_IRQ_MASK1_CLR__sw_int2__BITNR 26 +#define R_IRQ_MASK1_CLR__sw_int2__WIDTH 1 +#define R_IRQ_MASK1_CLR__sw_int2__clr 1 +#define R_IRQ_MASK1_CLR__sw_int2__nop 0 +#define R_IRQ_MASK1_CLR__sw_int1__BITNR 25 +#define R_IRQ_MASK1_CLR__sw_int1__WIDTH 1 +#define R_IRQ_MASK1_CLR__sw_int1__clr 1 +#define R_IRQ_MASK1_CLR__sw_int1__nop 0 +#define R_IRQ_MASK1_CLR__sw_int0__BITNR 24 +#define R_IRQ_MASK1_CLR__sw_int0__WIDTH 1 +#define R_IRQ_MASK1_CLR__sw_int0__clr 1 +#define R_IRQ_MASK1_CLR__sw_int0__nop 0 +#define R_IRQ_MASK1_CLR__par1_ecp_cmd__BITNR 19 +#define R_IRQ_MASK1_CLR__par1_ecp_cmd__WIDTH 1 +#define R_IRQ_MASK1_CLR__par1_ecp_cmd__clr 1 +#define R_IRQ_MASK1_CLR__par1_ecp_cmd__nop 0 +#define R_IRQ_MASK1_CLR__par1_peri__BITNR 18 +#define R_IRQ_MASK1_CLR__par1_peri__WIDTH 1 +#define R_IRQ_MASK1_CLR__par1_peri__clr 1 +#define R_IRQ_MASK1_CLR__par1_peri__nop 0 +#define R_IRQ_MASK1_CLR__par1_data__BITNR 17 +#define R_IRQ_MASK1_CLR__par1_data__WIDTH 1 +#define R_IRQ_MASK1_CLR__par1_data__clr 1 +#define R_IRQ_MASK1_CLR__par1_data__nop 0 +#define R_IRQ_MASK1_CLR__par1_ready__BITNR 16 +#define R_IRQ_MASK1_CLR__par1_ready__WIDTH 1 +#define R_IRQ_MASK1_CLR__par1_ready__clr 1 +#define R_IRQ_MASK1_CLR__par1_ready__nop 0 +#define R_IRQ_MASK1_CLR__scsi1__BITNR 16 +#define R_IRQ_MASK1_CLR__scsi1__WIDTH 1 +#define R_IRQ_MASK1_CLR__scsi1__clr 1 +#define R_IRQ_MASK1_CLR__scsi1__nop 0 +#define R_IRQ_MASK1_CLR__ser3_ready__BITNR 15 +#define R_IRQ_MASK1_CLR__ser3_ready__WIDTH 1 +#define R_IRQ_MASK1_CLR__ser3_ready__clr 1 +#define R_IRQ_MASK1_CLR__ser3_ready__nop 0 +#define R_IRQ_MASK1_CLR__ser3_data__BITNR 14 +#define R_IRQ_MASK1_CLR__ser3_data__WIDTH 1 +#define R_IRQ_MASK1_CLR__ser3_data__clr 1 +#define R_IRQ_MASK1_CLR__ser3_data__nop 0 +#define R_IRQ_MASK1_CLR__ser2_ready__BITNR 13 +#define R_IRQ_MASK1_CLR__ser2_ready__WIDTH 1 +#define R_IRQ_MASK1_CLR__ser2_ready__clr 1 +#define R_IRQ_MASK1_CLR__ser2_ready__nop 0 +#define R_IRQ_MASK1_CLR__ser2_data__BITNR 12 +#define R_IRQ_MASK1_CLR__ser2_data__WIDTH 1 +#define R_IRQ_MASK1_CLR__ser2_data__clr 1 +#define R_IRQ_MASK1_CLR__ser2_data__nop 0 +#define R_IRQ_MASK1_CLR__ser1_ready__BITNR 11 +#define R_IRQ_MASK1_CLR__ser1_ready__WIDTH 1 +#define R_IRQ_MASK1_CLR__ser1_ready__clr 1 +#define R_IRQ_MASK1_CLR__ser1_ready__nop 0 +#define R_IRQ_MASK1_CLR__ser1_data__BITNR 10 +#define R_IRQ_MASK1_CLR__ser1_data__WIDTH 1 +#define R_IRQ_MASK1_CLR__ser1_data__clr 1 +#define R_IRQ_MASK1_CLR__ser1_data__nop 0 +#define R_IRQ_MASK1_CLR__ser0_ready__BITNR 9 +#define R_IRQ_MASK1_CLR__ser0_ready__WIDTH 1 +#define R_IRQ_MASK1_CLR__ser0_ready__clr 1 +#define R_IRQ_MASK1_CLR__ser0_ready__nop 0 +#define R_IRQ_MASK1_CLR__ser0_data__BITNR 8 +#define R_IRQ_MASK1_CLR__ser0_data__WIDTH 1 +#define R_IRQ_MASK1_CLR__ser0_data__clr 1 +#define R_IRQ_MASK1_CLR__ser0_data__nop 0 +#define R_IRQ_MASK1_CLR__pa7__BITNR 7 +#define R_IRQ_MASK1_CLR__pa7__WIDTH 1 +#define R_IRQ_MASK1_CLR__pa7__clr 1 +#define R_IRQ_MASK1_CLR__pa7__nop 0 +#define R_IRQ_MASK1_CLR__pa6__BITNR 6 +#define R_IRQ_MASK1_CLR__pa6__WIDTH 1 +#define R_IRQ_MASK1_CLR__pa6__clr 1 +#define R_IRQ_MASK1_CLR__pa6__nop 0 +#define R_IRQ_MASK1_CLR__pa5__BITNR 5 +#define R_IRQ_MASK1_CLR__pa5__WIDTH 1 +#define R_IRQ_MASK1_CLR__pa5__clr 1 +#define R_IRQ_MASK1_CLR__pa5__nop 0 +#define R_IRQ_MASK1_CLR__pa4__BITNR 4 +#define R_IRQ_MASK1_CLR__pa4__WIDTH 1 +#define R_IRQ_MASK1_CLR__pa4__clr 1 +#define R_IRQ_MASK1_CLR__pa4__nop 0 +#define R_IRQ_MASK1_CLR__pa3__BITNR 3 +#define R_IRQ_MASK1_CLR__pa3__WIDTH 1 +#define R_IRQ_MASK1_CLR__pa3__clr 1 +#define R_IRQ_MASK1_CLR__pa3__nop 0 +#define R_IRQ_MASK1_CLR__pa2__BITNR 2 +#define R_IRQ_MASK1_CLR__pa2__WIDTH 1 +#define R_IRQ_MASK1_CLR__pa2__clr 1 +#define R_IRQ_MASK1_CLR__pa2__nop 0 +#define R_IRQ_MASK1_CLR__pa1__BITNR 1 +#define R_IRQ_MASK1_CLR__pa1__WIDTH 1 +#define R_IRQ_MASK1_CLR__pa1__clr 1 +#define R_IRQ_MASK1_CLR__pa1__nop 0 +#define R_IRQ_MASK1_CLR__pa0__BITNR 0 +#define R_IRQ_MASK1_CLR__pa0__WIDTH 1 +#define R_IRQ_MASK1_CLR__pa0__clr 1 +#define R_IRQ_MASK1_CLR__pa0__nop 0 + +#define R_IRQ_READ1 (IO_TYPECAST_RO_UDWORD 0xb00000cc) +#define R_IRQ_READ1__sw_int7__BITNR 31 +#define R_IRQ_READ1__sw_int7__WIDTH 1 +#define R_IRQ_READ1__sw_int7__active 1 +#define R_IRQ_READ1__sw_int7__inactive 0 +#define R_IRQ_READ1__sw_int6__BITNR 30 +#define R_IRQ_READ1__sw_int6__WIDTH 1 +#define R_IRQ_READ1__sw_int6__active 1 +#define R_IRQ_READ1__sw_int6__inactive 0 +#define R_IRQ_READ1__sw_int5__BITNR 29 +#define R_IRQ_READ1__sw_int5__WIDTH 1 +#define R_IRQ_READ1__sw_int5__active 1 +#define R_IRQ_READ1__sw_int5__inactive 0 +#define R_IRQ_READ1__sw_int4__BITNR 28 +#define R_IRQ_READ1__sw_int4__WIDTH 1 +#define R_IRQ_READ1__sw_int4__active 1 +#define R_IRQ_READ1__sw_int4__inactive 0 +#define R_IRQ_READ1__sw_int3__BITNR 27 +#define R_IRQ_READ1__sw_int3__WIDTH 1 +#define R_IRQ_READ1__sw_int3__active 1 +#define R_IRQ_READ1__sw_int3__inactive 0 +#define R_IRQ_READ1__sw_int2__BITNR 26 +#define R_IRQ_READ1__sw_int2__WIDTH 1 +#define R_IRQ_READ1__sw_int2__active 1 +#define R_IRQ_READ1__sw_int2__inactive 0 +#define R_IRQ_READ1__sw_int1__BITNR 25 +#define R_IRQ_READ1__sw_int1__WIDTH 1 +#define R_IRQ_READ1__sw_int1__active 1 +#define R_IRQ_READ1__sw_int1__inactive 0 +#define R_IRQ_READ1__sw_int0__BITNR 24 +#define R_IRQ_READ1__sw_int0__WIDTH 1 +#define R_IRQ_READ1__sw_int0__active 1 +#define R_IRQ_READ1__sw_int0__inactive 0 +#define R_IRQ_READ1__par1_ecp_cmd__BITNR 19 +#define R_IRQ_READ1__par1_ecp_cmd__WIDTH 1 +#define R_IRQ_READ1__par1_ecp_cmd__active 1 +#define R_IRQ_READ1__par1_ecp_cmd__inactive 0 +#define R_IRQ_READ1__par1_peri__BITNR 18 +#define R_IRQ_READ1__par1_peri__WIDTH 1 +#define R_IRQ_READ1__par1_peri__active 1 +#define R_IRQ_READ1__par1_peri__inactive 0 +#define R_IRQ_READ1__par1_data__BITNR 17 +#define R_IRQ_READ1__par1_data__WIDTH 1 +#define R_IRQ_READ1__par1_data__active 1 +#define R_IRQ_READ1__par1_data__inactive 0 +#define R_IRQ_READ1__par1_ready__BITNR 16 +#define R_IRQ_READ1__par1_ready__WIDTH 1 +#define R_IRQ_READ1__par1_ready__active 1 +#define R_IRQ_READ1__par1_ready__inactive 0 +#define R_IRQ_READ1__scsi1__BITNR 16 +#define R_IRQ_READ1__scsi1__WIDTH 1 +#define R_IRQ_READ1__scsi1__active 1 +#define R_IRQ_READ1__scsi1__inactive 0 +#define R_IRQ_READ1__ser3_ready__BITNR 15 +#define R_IRQ_READ1__ser3_ready__WIDTH 1 +#define R_IRQ_READ1__ser3_ready__active 1 +#define R_IRQ_READ1__ser3_ready__inactive 0 +#define R_IRQ_READ1__ser3_data__BITNR 14 +#define R_IRQ_READ1__ser3_data__WIDTH 1 +#define R_IRQ_READ1__ser3_data__active 1 +#define R_IRQ_READ1__ser3_data__inactive 0 +#define R_IRQ_READ1__ser2_ready__BITNR 13 +#define R_IRQ_READ1__ser2_ready__WIDTH 1 +#define R_IRQ_READ1__ser2_ready__active 1 +#define R_IRQ_READ1__ser2_ready__inactive 0 +#define R_IRQ_READ1__ser2_data__BITNR 12 +#define R_IRQ_READ1__ser2_data__WIDTH 1 +#define R_IRQ_READ1__ser2_data__active 1 +#define R_IRQ_READ1__ser2_data__inactive 0 +#define R_IRQ_READ1__ser1_ready__BITNR 11 +#define R_IRQ_READ1__ser1_ready__WIDTH 1 +#define R_IRQ_READ1__ser1_ready__active 1 +#define R_IRQ_READ1__ser1_ready__inactive 0 +#define R_IRQ_READ1__ser1_data__BITNR 10 +#define R_IRQ_READ1__ser1_data__WIDTH 1 +#define R_IRQ_READ1__ser1_data__active 1 +#define R_IRQ_READ1__ser1_data__inactive 0 +#define R_IRQ_READ1__ser0_ready__BITNR 9 +#define R_IRQ_READ1__ser0_ready__WIDTH 1 +#define R_IRQ_READ1__ser0_ready__active 1 +#define R_IRQ_READ1__ser0_ready__inactive 0 +#define R_IRQ_READ1__ser0_data__BITNR 8 +#define R_IRQ_READ1__ser0_data__WIDTH 1 +#define R_IRQ_READ1__ser0_data__active 1 +#define R_IRQ_READ1__ser0_data__inactive 0 +#define R_IRQ_READ1__pa7__BITNR 7 +#define R_IRQ_READ1__pa7__WIDTH 1 +#define R_IRQ_READ1__pa7__active 1 +#define R_IRQ_READ1__pa7__inactive 0 +#define R_IRQ_READ1__pa6__BITNR 6 +#define R_IRQ_READ1__pa6__WIDTH 1 +#define R_IRQ_READ1__pa6__active 1 +#define R_IRQ_READ1__pa6__inactive 0 +#define R_IRQ_READ1__pa5__BITNR 5 +#define R_IRQ_READ1__pa5__WIDTH 1 +#define R_IRQ_READ1__pa5__active 1 +#define R_IRQ_READ1__pa5__inactive 0 +#define R_IRQ_READ1__pa4__BITNR 4 +#define R_IRQ_READ1__pa4__WIDTH 1 +#define R_IRQ_READ1__pa4__active 1 +#define R_IRQ_READ1__pa4__inactive 0 +#define R_IRQ_READ1__pa3__BITNR 3 +#define R_IRQ_READ1__pa3__WIDTH 1 +#define R_IRQ_READ1__pa3__active 1 +#define R_IRQ_READ1__pa3__inactive 0 +#define R_IRQ_READ1__pa2__BITNR 2 +#define R_IRQ_READ1__pa2__WIDTH 1 +#define R_IRQ_READ1__pa2__active 1 +#define R_IRQ_READ1__pa2__inactive 0 +#define R_IRQ_READ1__pa1__BITNR 1 +#define R_IRQ_READ1__pa1__WIDTH 1 +#define R_IRQ_READ1__pa1__active 1 +#define R_IRQ_READ1__pa1__inactive 0 +#define R_IRQ_READ1__pa0__BITNR 0 +#define R_IRQ_READ1__pa0__WIDTH 1 +#define R_IRQ_READ1__pa0__active 1 +#define R_IRQ_READ1__pa0__inactive 0 + +#define R_IRQ_MASK1_SET (IO_TYPECAST_UDWORD 0xb00000cc) +#define R_IRQ_MASK1_SET__sw_int7__BITNR 31 +#define R_IRQ_MASK1_SET__sw_int7__WIDTH 1 +#define R_IRQ_MASK1_SET__sw_int7__set 1 +#define R_IRQ_MASK1_SET__sw_int7__nop 0 +#define R_IRQ_MASK1_SET__sw_int6__BITNR 30 +#define R_IRQ_MASK1_SET__sw_int6__WIDTH 1 +#define R_IRQ_MASK1_SET__sw_int6__set 1 +#define R_IRQ_MASK1_SET__sw_int6__nop 0 +#define R_IRQ_MASK1_SET__sw_int5__BITNR 29 +#define R_IRQ_MASK1_SET__sw_int5__WIDTH 1 +#define R_IRQ_MASK1_SET__sw_int5__set 1 +#define R_IRQ_MASK1_SET__sw_int5__nop 0 +#define R_IRQ_MASK1_SET__sw_int4__BITNR 28 +#define R_IRQ_MASK1_SET__sw_int4__WIDTH 1 +#define R_IRQ_MASK1_SET__sw_int4__set 1 +#define R_IRQ_MASK1_SET__sw_int4__nop 0 +#define R_IRQ_MASK1_SET__sw_int3__BITNR 27 +#define R_IRQ_MASK1_SET__sw_int3__WIDTH 1 +#define R_IRQ_MASK1_SET__sw_int3__set 1 +#define R_IRQ_MASK1_SET__sw_int3__nop 0 +#define R_IRQ_MASK1_SET__sw_int2__BITNR 26 +#define R_IRQ_MASK1_SET__sw_int2__WIDTH 1 +#define R_IRQ_MASK1_SET__sw_int2__set 1 +#define R_IRQ_MASK1_SET__sw_int2__nop 0 +#define R_IRQ_MASK1_SET__sw_int1__BITNR 25 +#define R_IRQ_MASK1_SET__sw_int1__WIDTH 1 +#define R_IRQ_MASK1_SET__sw_int1__set 1 +#define R_IRQ_MASK1_SET__sw_int1__nop 0 +#define R_IRQ_MASK1_SET__sw_int0__BITNR 24 +#define R_IRQ_MASK1_SET__sw_int0__WIDTH 1 +#define R_IRQ_MASK1_SET__sw_int0__set 1 +#define R_IRQ_MASK1_SET__sw_int0__nop 0 +#define R_IRQ_MASK1_SET__par1_ecp_cmd__BITNR 19 +#define R_IRQ_MASK1_SET__par1_ecp_cmd__WIDTH 1 +#define R_IRQ_MASK1_SET__par1_ecp_cmd__set 1 +#define R_IRQ_MASK1_SET__par1_ecp_cmd__nop 0 +#define R_IRQ_MASK1_SET__par1_peri__BITNR 18 +#define R_IRQ_MASK1_SET__par1_peri__WIDTH 1 +#define R_IRQ_MASK1_SET__par1_peri__set 1 +#define R_IRQ_MASK1_SET__par1_peri__nop 0 +#define R_IRQ_MASK1_SET__par1_data__BITNR 17 +#define R_IRQ_MASK1_SET__par1_data__WIDTH 1 +#define R_IRQ_MASK1_SET__par1_data__set 1 +#define R_IRQ_MASK1_SET__par1_data__nop 0 +#define R_IRQ_MASK1_SET__par1_ready__BITNR 16 +#define R_IRQ_MASK1_SET__par1_ready__WIDTH 1 +#define R_IRQ_MASK1_SET__par1_ready__set 1 +#define R_IRQ_MASK1_SET__par1_ready__nop 0 +#define R_IRQ_MASK1_SET__scsi1__BITNR 16 +#define R_IRQ_MASK1_SET__scsi1__WIDTH 1 +#define R_IRQ_MASK1_SET__scsi1__set 1 +#define R_IRQ_MASK1_SET__scsi1__nop 0 +#define R_IRQ_MASK1_SET__ser3_ready__BITNR 15 +#define R_IRQ_MASK1_SET__ser3_ready__WIDTH 1 +#define R_IRQ_MASK1_SET__ser3_ready__set 1 +#define R_IRQ_MASK1_SET__ser3_ready__nop 0 +#define R_IRQ_MASK1_SET__ser3_data__BITNR 14 +#define R_IRQ_MASK1_SET__ser3_data__WIDTH 1 +#define R_IRQ_MASK1_SET__ser3_data__set 1 +#define R_IRQ_MASK1_SET__ser3_data__nop 0 +#define R_IRQ_MASK1_SET__ser2_ready__BITNR 13 +#define R_IRQ_MASK1_SET__ser2_ready__WIDTH 1 +#define R_IRQ_MASK1_SET__ser2_ready__set 1 +#define R_IRQ_MASK1_SET__ser2_ready__nop 0 +#define R_IRQ_MASK1_SET__ser2_data__BITNR 12 +#define R_IRQ_MASK1_SET__ser2_data__WIDTH 1 +#define R_IRQ_MASK1_SET__ser2_data__set 1 +#define R_IRQ_MASK1_SET__ser2_data__nop 0 +#define R_IRQ_MASK1_SET__ser1_ready__BITNR 11 +#define R_IRQ_MASK1_SET__ser1_ready__WIDTH 1 +#define R_IRQ_MASK1_SET__ser1_ready__set 1 +#define R_IRQ_MASK1_SET__ser1_ready__nop 0 +#define R_IRQ_MASK1_SET__ser1_data__BITNR 10 +#define R_IRQ_MASK1_SET__ser1_data__WIDTH 1 +#define R_IRQ_MASK1_SET__ser1_data__set 1 +#define R_IRQ_MASK1_SET__ser1_data__nop 0 +#define R_IRQ_MASK1_SET__ser0_ready__BITNR 9 +#define R_IRQ_MASK1_SET__ser0_ready__WIDTH 1 +#define R_IRQ_MASK1_SET__ser0_ready__set 1 +#define R_IRQ_MASK1_SET__ser0_ready__nop 0 +#define R_IRQ_MASK1_SET__ser0_data__BITNR 8 +#define R_IRQ_MASK1_SET__ser0_data__WIDTH 1 +#define R_IRQ_MASK1_SET__ser0_data__set 1 +#define R_IRQ_MASK1_SET__ser0_data__nop 0 +#define R_IRQ_MASK1_SET__pa7__BITNR 7 +#define R_IRQ_MASK1_SET__pa7__WIDTH 1 +#define R_IRQ_MASK1_SET__pa7__set 1 +#define R_IRQ_MASK1_SET__pa7__nop 0 +#define R_IRQ_MASK1_SET__pa6__BITNR 6 +#define R_IRQ_MASK1_SET__pa6__WIDTH 1 +#define R_IRQ_MASK1_SET__pa6__set 1 +#define R_IRQ_MASK1_SET__pa6__nop 0 +#define R_IRQ_MASK1_SET__pa5__BITNR 5 +#define R_IRQ_MASK1_SET__pa5__WIDTH 1 +#define R_IRQ_MASK1_SET__pa5__set 1 +#define R_IRQ_MASK1_SET__pa5__nop 0 +#define R_IRQ_MASK1_SET__pa4__BITNR 4 +#define R_IRQ_MASK1_SET__pa4__WIDTH 1 +#define R_IRQ_MASK1_SET__pa4__set 1 +#define R_IRQ_MASK1_SET__pa4__nop 0 +#define R_IRQ_MASK1_SET__pa3__BITNR 3 +#define R_IRQ_MASK1_SET__pa3__WIDTH 1 +#define R_IRQ_MASK1_SET__pa3__set 1 +#define R_IRQ_MASK1_SET__pa3__nop 0 +#define R_IRQ_MASK1_SET__pa2__BITNR 2 +#define R_IRQ_MASK1_SET__pa2__WIDTH 1 +#define R_IRQ_MASK1_SET__pa2__set 1 +#define R_IRQ_MASK1_SET__pa2__nop 0 +#define R_IRQ_MASK1_SET__pa1__BITNR 1 +#define R_IRQ_MASK1_SET__pa1__WIDTH 1 +#define R_IRQ_MASK1_SET__pa1__set 1 +#define R_IRQ_MASK1_SET__pa1__nop 0 +#define R_IRQ_MASK1_SET__pa0__BITNR 0 +#define R_IRQ_MASK1_SET__pa0__WIDTH 1 +#define R_IRQ_MASK1_SET__pa0__set 1 +#define R_IRQ_MASK1_SET__pa0__nop 0 + +#define R_IRQ_MASK2_RD (IO_TYPECAST_RO_UDWORD 0xb00000d0) +#define R_IRQ_MASK2_RD__dma8_sub3_descr__BITNR 23 +#define R_IRQ_MASK2_RD__dma8_sub3_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma8_sub3_descr__active 1 +#define R_IRQ_MASK2_RD__dma8_sub3_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma8_sub2_descr__BITNR 22 +#define R_IRQ_MASK2_RD__dma8_sub2_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma8_sub2_descr__active 1 +#define R_IRQ_MASK2_RD__dma8_sub2_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma8_sub1_descr__BITNR 21 +#define R_IRQ_MASK2_RD__dma8_sub1_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma8_sub1_descr__active 1 +#define R_IRQ_MASK2_RD__dma8_sub1_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma8_sub0_descr__BITNR 20 +#define R_IRQ_MASK2_RD__dma8_sub0_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma8_sub0_descr__active 1 +#define R_IRQ_MASK2_RD__dma8_sub0_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma9_eop__BITNR 19 +#define R_IRQ_MASK2_RD__dma9_eop__WIDTH 1 +#define R_IRQ_MASK2_RD__dma9_eop__active 1 +#define R_IRQ_MASK2_RD__dma9_eop__inactive 0 +#define R_IRQ_MASK2_RD__dma9_descr__BITNR 18 +#define R_IRQ_MASK2_RD__dma9_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma9_descr__active 1 +#define R_IRQ_MASK2_RD__dma9_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma8_eop__BITNR 17 +#define R_IRQ_MASK2_RD__dma8_eop__WIDTH 1 +#define R_IRQ_MASK2_RD__dma8_eop__active 1 +#define R_IRQ_MASK2_RD__dma8_eop__inactive 0 +#define R_IRQ_MASK2_RD__dma8_descr__BITNR 16 +#define R_IRQ_MASK2_RD__dma8_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma8_descr__active 1 +#define R_IRQ_MASK2_RD__dma8_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma7_eop__BITNR 15 +#define R_IRQ_MASK2_RD__dma7_eop__WIDTH 1 +#define R_IRQ_MASK2_RD__dma7_eop__active 1 +#define R_IRQ_MASK2_RD__dma7_eop__inactive 0 +#define R_IRQ_MASK2_RD__dma7_descr__BITNR 14 +#define R_IRQ_MASK2_RD__dma7_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma7_descr__active 1 +#define R_IRQ_MASK2_RD__dma7_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma6_eop__BITNR 13 +#define R_IRQ_MASK2_RD__dma6_eop__WIDTH 1 +#define R_IRQ_MASK2_RD__dma6_eop__active 1 +#define R_IRQ_MASK2_RD__dma6_eop__inactive 0 +#define R_IRQ_MASK2_RD__dma6_descr__BITNR 12 +#define R_IRQ_MASK2_RD__dma6_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma6_descr__active 1 +#define R_IRQ_MASK2_RD__dma6_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma5_eop__BITNR 11 +#define R_IRQ_MASK2_RD__dma5_eop__WIDTH 1 +#define R_IRQ_MASK2_RD__dma5_eop__active 1 +#define R_IRQ_MASK2_RD__dma5_eop__inactive 0 +#define R_IRQ_MASK2_RD__dma5_descr__BITNR 10 +#define R_IRQ_MASK2_RD__dma5_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma5_descr__active 1 +#define R_IRQ_MASK2_RD__dma5_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma4_eop__BITNR 9 +#define R_IRQ_MASK2_RD__dma4_eop__WIDTH 1 +#define R_IRQ_MASK2_RD__dma4_eop__active 1 +#define R_IRQ_MASK2_RD__dma4_eop__inactive 0 +#define R_IRQ_MASK2_RD__dma4_descr__BITNR 8 +#define R_IRQ_MASK2_RD__dma4_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma4_descr__active 1 +#define R_IRQ_MASK2_RD__dma4_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma3_eop__BITNR 7 +#define R_IRQ_MASK2_RD__dma3_eop__WIDTH 1 +#define R_IRQ_MASK2_RD__dma3_eop__active 1 +#define R_IRQ_MASK2_RD__dma3_eop__inactive 0 +#define R_IRQ_MASK2_RD__dma3_descr__BITNR 6 +#define R_IRQ_MASK2_RD__dma3_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma3_descr__active 1 +#define R_IRQ_MASK2_RD__dma3_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma2_eop__BITNR 5 +#define R_IRQ_MASK2_RD__dma2_eop__WIDTH 1 +#define R_IRQ_MASK2_RD__dma2_eop__active 1 +#define R_IRQ_MASK2_RD__dma2_eop__inactive 0 +#define R_IRQ_MASK2_RD__dma2_descr__BITNR 4 +#define R_IRQ_MASK2_RD__dma2_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma2_descr__active 1 +#define R_IRQ_MASK2_RD__dma2_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma1_eop__BITNR 3 +#define R_IRQ_MASK2_RD__dma1_eop__WIDTH 1 +#define R_IRQ_MASK2_RD__dma1_eop__active 1 +#define R_IRQ_MASK2_RD__dma1_eop__inactive 0 +#define R_IRQ_MASK2_RD__dma1_descr__BITNR 2 +#define R_IRQ_MASK2_RD__dma1_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma1_descr__active 1 +#define R_IRQ_MASK2_RD__dma1_descr__inactive 0 +#define R_IRQ_MASK2_RD__dma0_eop__BITNR 1 +#define R_IRQ_MASK2_RD__dma0_eop__WIDTH 1 +#define R_IRQ_MASK2_RD__dma0_eop__active 1 +#define R_IRQ_MASK2_RD__dma0_eop__inactive 0 +#define R_IRQ_MASK2_RD__dma0_descr__BITNR 0 +#define R_IRQ_MASK2_RD__dma0_descr__WIDTH 1 +#define R_IRQ_MASK2_RD__dma0_descr__active 1 +#define R_IRQ_MASK2_RD__dma0_descr__inactive 0 + +#define R_IRQ_MASK2_CLR (IO_TYPECAST_UDWORD 0xb00000d0) +#define R_IRQ_MASK2_CLR__dma8_sub3_descr__BITNR 23 +#define R_IRQ_MASK2_CLR__dma8_sub3_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma8_sub3_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma8_sub3_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma8_sub2_descr__BITNR 22 +#define R_IRQ_MASK2_CLR__dma8_sub2_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma8_sub2_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma8_sub2_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma8_sub1_descr__BITNR 21 +#define R_IRQ_MASK2_CLR__dma8_sub1_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma8_sub1_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma8_sub1_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma8_sub0_descr__BITNR 20 +#define R_IRQ_MASK2_CLR__dma8_sub0_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma8_sub0_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma8_sub0_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma9_eop__BITNR 19 +#define R_IRQ_MASK2_CLR__dma9_eop__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma9_eop__clr 1 +#define R_IRQ_MASK2_CLR__dma9_eop__nop 0 +#define R_IRQ_MASK2_CLR__dma9_descr__BITNR 18 +#define R_IRQ_MASK2_CLR__dma9_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma9_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma9_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma8_eop__BITNR 17 +#define R_IRQ_MASK2_CLR__dma8_eop__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma8_eop__clr 1 +#define R_IRQ_MASK2_CLR__dma8_eop__nop 0 +#define R_IRQ_MASK2_CLR__dma8_descr__BITNR 16 +#define R_IRQ_MASK2_CLR__dma8_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma8_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma8_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma7_eop__BITNR 15 +#define R_IRQ_MASK2_CLR__dma7_eop__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma7_eop__clr 1 +#define R_IRQ_MASK2_CLR__dma7_eop__nop 0 +#define R_IRQ_MASK2_CLR__dma7_descr__BITNR 14 +#define R_IRQ_MASK2_CLR__dma7_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma7_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma7_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma6_eop__BITNR 13 +#define R_IRQ_MASK2_CLR__dma6_eop__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma6_eop__clr 1 +#define R_IRQ_MASK2_CLR__dma6_eop__nop 0 +#define R_IRQ_MASK2_CLR__dma6_descr__BITNR 12 +#define R_IRQ_MASK2_CLR__dma6_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma6_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma6_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma5_eop__BITNR 11 +#define R_IRQ_MASK2_CLR__dma5_eop__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma5_eop__clr 1 +#define R_IRQ_MASK2_CLR__dma5_eop__nop 0 +#define R_IRQ_MASK2_CLR__dma5_descr__BITNR 10 +#define R_IRQ_MASK2_CLR__dma5_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma5_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma5_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma4_eop__BITNR 9 +#define R_IRQ_MASK2_CLR__dma4_eop__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma4_eop__clr 1 +#define R_IRQ_MASK2_CLR__dma4_eop__nop 0 +#define R_IRQ_MASK2_CLR__dma4_descr__BITNR 8 +#define R_IRQ_MASK2_CLR__dma4_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma4_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma4_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma3_eop__BITNR 7 +#define R_IRQ_MASK2_CLR__dma3_eop__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma3_eop__clr 1 +#define R_IRQ_MASK2_CLR__dma3_eop__nop 0 +#define R_IRQ_MASK2_CLR__dma3_descr__BITNR 6 +#define R_IRQ_MASK2_CLR__dma3_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma3_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma3_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma2_eop__BITNR 5 +#define R_IRQ_MASK2_CLR__dma2_eop__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma2_eop__clr 1 +#define R_IRQ_MASK2_CLR__dma2_eop__nop 0 +#define R_IRQ_MASK2_CLR__dma2_descr__BITNR 4 +#define R_IRQ_MASK2_CLR__dma2_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma2_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma2_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma1_eop__BITNR 3 +#define R_IRQ_MASK2_CLR__dma1_eop__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma1_eop__clr 1 +#define R_IRQ_MASK2_CLR__dma1_eop__nop 0 +#define R_IRQ_MASK2_CLR__dma1_descr__BITNR 2 +#define R_IRQ_MASK2_CLR__dma1_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma1_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma1_descr__nop 0 +#define R_IRQ_MASK2_CLR__dma0_eop__BITNR 1 +#define R_IRQ_MASK2_CLR__dma0_eop__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma0_eop__clr 1 +#define R_IRQ_MASK2_CLR__dma0_eop__nop 0 +#define R_IRQ_MASK2_CLR__dma0_descr__BITNR 0 +#define R_IRQ_MASK2_CLR__dma0_descr__WIDTH 1 +#define R_IRQ_MASK2_CLR__dma0_descr__clr 1 +#define R_IRQ_MASK2_CLR__dma0_descr__nop 0 + +#define R_IRQ_READ2 (IO_TYPECAST_RO_UDWORD 0xb00000d4) +#define R_IRQ_READ2__dma8_sub3_descr__BITNR 23 +#define R_IRQ_READ2__dma8_sub3_descr__WIDTH 1 +#define R_IRQ_READ2__dma8_sub3_descr__active 1 +#define R_IRQ_READ2__dma8_sub3_descr__inactive 0 +#define R_IRQ_READ2__dma8_sub2_descr__BITNR 22 +#define R_IRQ_READ2__dma8_sub2_descr__WIDTH 1 +#define R_IRQ_READ2__dma8_sub2_descr__active 1 +#define R_IRQ_READ2__dma8_sub2_descr__inactive 0 +#define R_IRQ_READ2__dma8_sub1_descr__BITNR 21 +#define R_IRQ_READ2__dma8_sub1_descr__WIDTH 1 +#define R_IRQ_READ2__dma8_sub1_descr__active 1 +#define R_IRQ_READ2__dma8_sub1_descr__inactive 0 +#define R_IRQ_READ2__dma8_sub0_descr__BITNR 20 +#define R_IRQ_READ2__dma8_sub0_descr__WIDTH 1 +#define R_IRQ_READ2__dma8_sub0_descr__active 1 +#define R_IRQ_READ2__dma8_sub0_descr__inactive 0 +#define R_IRQ_READ2__dma9_eop__BITNR 19 +#define R_IRQ_READ2__dma9_eop__WIDTH 1 +#define R_IRQ_READ2__dma9_eop__active 1 +#define R_IRQ_READ2__dma9_eop__inactive 0 +#define R_IRQ_READ2__dma9_descr__BITNR 18 +#define R_IRQ_READ2__dma9_descr__WIDTH 1 +#define R_IRQ_READ2__dma9_descr__active 1 +#define R_IRQ_READ2__dma9_descr__inactive 0 +#define R_IRQ_READ2__dma8_eop__BITNR 17 +#define R_IRQ_READ2__dma8_eop__WIDTH 1 +#define R_IRQ_READ2__dma8_eop__active 1 +#define R_IRQ_READ2__dma8_eop__inactive 0 +#define R_IRQ_READ2__dma8_descr__BITNR 16 +#define R_IRQ_READ2__dma8_descr__WIDTH 1 +#define R_IRQ_READ2__dma8_descr__active 1 +#define R_IRQ_READ2__dma8_descr__inactive 0 +#define R_IRQ_READ2__dma7_eop__BITNR 15 +#define R_IRQ_READ2__dma7_eop__WIDTH 1 +#define R_IRQ_READ2__dma7_eop__active 1 +#define R_IRQ_READ2__dma7_eop__inactive 0 +#define R_IRQ_READ2__dma7_descr__BITNR 14 +#define R_IRQ_READ2__dma7_descr__WIDTH 1 +#define R_IRQ_READ2__dma7_descr__active 1 +#define R_IRQ_READ2__dma7_descr__inactive 0 +#define R_IRQ_READ2__dma6_eop__BITNR 13 +#define R_IRQ_READ2__dma6_eop__WIDTH 1 +#define R_IRQ_READ2__dma6_eop__active 1 +#define R_IRQ_READ2__dma6_eop__inactive 0 +#define R_IRQ_READ2__dma6_descr__BITNR 12 +#define R_IRQ_READ2__dma6_descr__WIDTH 1 +#define R_IRQ_READ2__dma6_descr__active 1 +#define R_IRQ_READ2__dma6_descr__inactive 0 +#define R_IRQ_READ2__dma5_eop__BITNR 11 +#define R_IRQ_READ2__dma5_eop__WIDTH 1 +#define R_IRQ_READ2__dma5_eop__active 1 +#define R_IRQ_READ2__dma5_eop__inactive 0 +#define R_IRQ_READ2__dma5_descr__BITNR 10 +#define R_IRQ_READ2__dma5_descr__WIDTH 1 +#define R_IRQ_READ2__dma5_descr__active 1 +#define R_IRQ_READ2__dma5_descr__inactive 0 +#define R_IRQ_READ2__dma4_eop__BITNR 9 +#define R_IRQ_READ2__dma4_eop__WIDTH 1 +#define R_IRQ_READ2__dma4_eop__active 1 +#define R_IRQ_READ2__dma4_eop__inactive 0 +#define R_IRQ_READ2__dma4_descr__BITNR 8 +#define R_IRQ_READ2__dma4_descr__WIDTH 1 +#define R_IRQ_READ2__dma4_descr__active 1 +#define R_IRQ_READ2__dma4_descr__inactive 0 +#define R_IRQ_READ2__dma3_eop__BITNR 7 +#define R_IRQ_READ2__dma3_eop__WIDTH 1 +#define R_IRQ_READ2__dma3_eop__active 1 +#define R_IRQ_READ2__dma3_eop__inactive 0 +#define R_IRQ_READ2__dma3_descr__BITNR 6 +#define R_IRQ_READ2__dma3_descr__WIDTH 1 +#define R_IRQ_READ2__dma3_descr__active 1 +#define R_IRQ_READ2__dma3_descr__inactive 0 +#define R_IRQ_READ2__dma2_eop__BITNR 5 +#define R_IRQ_READ2__dma2_eop__WIDTH 1 +#define R_IRQ_READ2__dma2_eop__active 1 +#define R_IRQ_READ2__dma2_eop__inactive 0 +#define R_IRQ_READ2__dma2_descr__BITNR 4 +#define R_IRQ_READ2__dma2_descr__WIDTH 1 +#define R_IRQ_READ2__dma2_descr__active 1 +#define R_IRQ_READ2__dma2_descr__inactive 0 +#define R_IRQ_READ2__dma1_eop__BITNR 3 +#define R_IRQ_READ2__dma1_eop__WIDTH 1 +#define R_IRQ_READ2__dma1_eop__active 1 +#define R_IRQ_READ2__dma1_eop__inactive 0 +#define R_IRQ_READ2__dma1_descr__BITNR 2 +#define R_IRQ_READ2__dma1_descr__WIDTH 1 +#define R_IRQ_READ2__dma1_descr__active 1 +#define R_IRQ_READ2__dma1_descr__inactive 0 +#define R_IRQ_READ2__dma0_eop__BITNR 1 +#define R_IRQ_READ2__dma0_eop__WIDTH 1 +#define R_IRQ_READ2__dma0_eop__active 1 +#define R_IRQ_READ2__dma0_eop__inactive 0 +#define R_IRQ_READ2__dma0_descr__BITNR 0 +#define R_IRQ_READ2__dma0_descr__WIDTH 1 +#define R_IRQ_READ2__dma0_descr__active 1 +#define R_IRQ_READ2__dma0_descr__inactive 0 + +#define R_IRQ_MASK2_SET (IO_TYPECAST_UDWORD 0xb00000d4) +#define R_IRQ_MASK2_SET__dma8_sub3_descr__BITNR 23 +#define R_IRQ_MASK2_SET__dma8_sub3_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma8_sub3_descr__set 1 +#define R_IRQ_MASK2_SET__dma8_sub3_descr__nop 0 +#define R_IRQ_MASK2_SET__dma8_sub2_descr__BITNR 22 +#define R_IRQ_MASK2_SET__dma8_sub2_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma8_sub2_descr__set 1 +#define R_IRQ_MASK2_SET__dma8_sub2_descr__nop 0 +#define R_IRQ_MASK2_SET__dma8_sub1_descr__BITNR 21 +#define R_IRQ_MASK2_SET__dma8_sub1_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma8_sub1_descr__set 1 +#define R_IRQ_MASK2_SET__dma8_sub1_descr__nop 0 +#define R_IRQ_MASK2_SET__dma8_sub0_descr__BITNR 20 +#define R_IRQ_MASK2_SET__dma8_sub0_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma8_sub0_descr__set 1 +#define R_IRQ_MASK2_SET__dma8_sub0_descr__nop 0 +#define R_IRQ_MASK2_SET__dma9_eop__BITNR 19 +#define R_IRQ_MASK2_SET__dma9_eop__WIDTH 1 +#define R_IRQ_MASK2_SET__dma9_eop__set 1 +#define R_IRQ_MASK2_SET__dma9_eop__nop 0 +#define R_IRQ_MASK2_SET__dma9_descr__BITNR 18 +#define R_IRQ_MASK2_SET__dma9_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma9_descr__set 1 +#define R_IRQ_MASK2_SET__dma9_descr__nop 0 +#define R_IRQ_MASK2_SET__dma8_eop__BITNR 17 +#define R_IRQ_MASK2_SET__dma8_eop__WIDTH 1 +#define R_IRQ_MASK2_SET__dma8_eop__set 1 +#define R_IRQ_MASK2_SET__dma8_eop__nop 0 +#define R_IRQ_MASK2_SET__dma8_descr__BITNR 16 +#define R_IRQ_MASK2_SET__dma8_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma8_descr__set 1 +#define R_IRQ_MASK2_SET__dma8_descr__nop 0 +#define R_IRQ_MASK2_SET__dma7_eop__BITNR 15 +#define R_IRQ_MASK2_SET__dma7_eop__WIDTH 1 +#define R_IRQ_MASK2_SET__dma7_eop__set 1 +#define R_IRQ_MASK2_SET__dma7_eop__nop 0 +#define R_IRQ_MASK2_SET__dma7_descr__BITNR 14 +#define R_IRQ_MASK2_SET__dma7_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma7_descr__set 1 +#define R_IRQ_MASK2_SET__dma7_descr__nop 0 +#define R_IRQ_MASK2_SET__dma6_eop__BITNR 13 +#define R_IRQ_MASK2_SET__dma6_eop__WIDTH 1 +#define R_IRQ_MASK2_SET__dma6_eop__set 1 +#define R_IRQ_MASK2_SET__dma6_eop__nop 0 +#define R_IRQ_MASK2_SET__dma6_descr__BITNR 12 +#define R_IRQ_MASK2_SET__dma6_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma6_descr__set 1 +#define R_IRQ_MASK2_SET__dma6_descr__nop 0 +#define R_IRQ_MASK2_SET__dma5_eop__BITNR 11 +#define R_IRQ_MASK2_SET__dma5_eop__WIDTH 1 +#define R_IRQ_MASK2_SET__dma5_eop__set 1 +#define R_IRQ_MASK2_SET__dma5_eop__nop 0 +#define R_IRQ_MASK2_SET__dma5_descr__BITNR 10 +#define R_IRQ_MASK2_SET__dma5_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma5_descr__set 1 +#define R_IRQ_MASK2_SET__dma5_descr__nop 0 +#define R_IRQ_MASK2_SET__dma4_eop__BITNR 9 +#define R_IRQ_MASK2_SET__dma4_eop__WIDTH 1 +#define R_IRQ_MASK2_SET__dma4_eop__set 1 +#define R_IRQ_MASK2_SET__dma4_eop__nop 0 +#define R_IRQ_MASK2_SET__dma4_descr__BITNR 8 +#define R_IRQ_MASK2_SET__dma4_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma4_descr__set 1 +#define R_IRQ_MASK2_SET__dma4_descr__nop 0 +#define R_IRQ_MASK2_SET__dma3_eop__BITNR 7 +#define R_IRQ_MASK2_SET__dma3_eop__WIDTH 1 +#define R_IRQ_MASK2_SET__dma3_eop__set 1 +#define R_IRQ_MASK2_SET__dma3_eop__nop 0 +#define R_IRQ_MASK2_SET__dma3_descr__BITNR 6 +#define R_IRQ_MASK2_SET__dma3_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma3_descr__set 1 +#define R_IRQ_MASK2_SET__dma3_descr__nop 0 +#define R_IRQ_MASK2_SET__dma2_eop__BITNR 5 +#define R_IRQ_MASK2_SET__dma2_eop__WIDTH 1 +#define R_IRQ_MASK2_SET__dma2_eop__set 1 +#define R_IRQ_MASK2_SET__dma2_eop__nop 0 +#define R_IRQ_MASK2_SET__dma2_descr__BITNR 4 +#define R_IRQ_MASK2_SET__dma2_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma2_descr__set 1 +#define R_IRQ_MASK2_SET__dma2_descr__nop 0 +#define R_IRQ_MASK2_SET__dma1_eop__BITNR 3 +#define R_IRQ_MASK2_SET__dma1_eop__WIDTH 1 +#define R_IRQ_MASK2_SET__dma1_eop__set 1 +#define R_IRQ_MASK2_SET__dma1_eop__nop 0 +#define R_IRQ_MASK2_SET__dma1_descr__BITNR 2 +#define R_IRQ_MASK2_SET__dma1_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma1_descr__set 1 +#define R_IRQ_MASK2_SET__dma1_descr__nop 0 +#define R_IRQ_MASK2_SET__dma0_eop__BITNR 1 +#define R_IRQ_MASK2_SET__dma0_eop__WIDTH 1 +#define R_IRQ_MASK2_SET__dma0_eop__set 1 +#define R_IRQ_MASK2_SET__dma0_eop__nop 0 +#define R_IRQ_MASK2_SET__dma0_descr__BITNR 0 +#define R_IRQ_MASK2_SET__dma0_descr__WIDTH 1 +#define R_IRQ_MASK2_SET__dma0_descr__set 1 +#define R_IRQ_MASK2_SET__dma0_descr__nop 0 + +#define R_VECT_MASK_RD (IO_TYPECAST_RO_UDWORD 0xb00000d8) +#define R_VECT_MASK_RD__usb__BITNR 31 +#define R_VECT_MASK_RD__usb__WIDTH 1 +#define R_VECT_MASK_RD__usb__active 1 +#define R_VECT_MASK_RD__usb__inactive 0 +#define R_VECT_MASK_RD__dma9__BITNR 25 +#define R_VECT_MASK_RD__dma9__WIDTH 1 +#define R_VECT_MASK_RD__dma9__active 1 +#define R_VECT_MASK_RD__dma9__inactive 0 +#define R_VECT_MASK_RD__dma8__BITNR 24 +#define R_VECT_MASK_RD__dma8__WIDTH 1 +#define R_VECT_MASK_RD__dma8__active 1 +#define R_VECT_MASK_RD__dma8__inactive 0 +#define R_VECT_MASK_RD__dma7__BITNR 23 +#define R_VECT_MASK_RD__dma7__WIDTH 1 +#define R_VECT_MASK_RD__dma7__active 1 +#define R_VECT_MASK_RD__dma7__inactive 0 +#define R_VECT_MASK_RD__dma6__BITNR 22 +#define R_VECT_MASK_RD__dma6__WIDTH 1 +#define R_VECT_MASK_RD__dma6__active 1 +#define R_VECT_MASK_RD__dma6__inactive 0 +#define R_VECT_MASK_RD__dma5__BITNR 21 +#define R_VECT_MASK_RD__dma5__WIDTH 1 +#define R_VECT_MASK_RD__dma5__active 1 +#define R_VECT_MASK_RD__dma5__inactive 0 +#define R_VECT_MASK_RD__dma4__BITNR 20 +#define R_VECT_MASK_RD__dma4__WIDTH 1 +#define R_VECT_MASK_RD__dma4__active 1 +#define R_VECT_MASK_RD__dma4__inactive 0 +#define R_VECT_MASK_RD__dma3__BITNR 19 +#define R_VECT_MASK_RD__dma3__WIDTH 1 +#define R_VECT_MASK_RD__dma3__active 1 +#define R_VECT_MASK_RD__dma3__inactive 0 +#define R_VECT_MASK_RD__dma2__BITNR 18 +#define R_VECT_MASK_RD__dma2__WIDTH 1 +#define R_VECT_MASK_RD__dma2__active 1 +#define R_VECT_MASK_RD__dma2__inactive 0 +#define R_VECT_MASK_RD__dma1__BITNR 17 +#define R_VECT_MASK_RD__dma1__WIDTH 1 +#define R_VECT_MASK_RD__dma1__active 1 +#define R_VECT_MASK_RD__dma1__inactive 0 +#define R_VECT_MASK_RD__dma0__BITNR 16 +#define R_VECT_MASK_RD__dma0__WIDTH 1 +#define R_VECT_MASK_RD__dma0__active 1 +#define R_VECT_MASK_RD__dma0__inactive 0 +#define R_VECT_MASK_RD__ext_dma1__BITNR 13 +#define R_VECT_MASK_RD__ext_dma1__WIDTH 1 +#define R_VECT_MASK_RD__ext_dma1__active 1 +#define R_VECT_MASK_RD__ext_dma1__inactive 0 +#define R_VECT_MASK_RD__ext_dma0__BITNR 12 +#define R_VECT_MASK_RD__ext_dma0__WIDTH 1 +#define R_VECT_MASK_RD__ext_dma0__active 1 +#define R_VECT_MASK_RD__ext_dma0__inactive 0 +#define R_VECT_MASK_RD__pa__BITNR 11 +#define R_VECT_MASK_RD__pa__WIDTH 1 +#define R_VECT_MASK_RD__pa__active 1 +#define R_VECT_MASK_RD__pa__inactive 0 +#define R_VECT_MASK_RD__irq_intnr__BITNR 10 +#define R_VECT_MASK_RD__irq_intnr__WIDTH 1 +#define R_VECT_MASK_RD__irq_intnr__active 1 +#define R_VECT_MASK_RD__irq_intnr__inactive 0 +#define R_VECT_MASK_RD__sw__BITNR 9 +#define R_VECT_MASK_RD__sw__WIDTH 1 +#define R_VECT_MASK_RD__sw__active 1 +#define R_VECT_MASK_RD__sw__inactive 0 +#define R_VECT_MASK_RD__serial__BITNR 8 +#define R_VECT_MASK_RD__serial__WIDTH 1 +#define R_VECT_MASK_RD__serial__active 1 +#define R_VECT_MASK_RD__serial__inactive 0 +#define R_VECT_MASK_RD__snmp__BITNR 7 +#define R_VECT_MASK_RD__snmp__WIDTH 1 +#define R_VECT_MASK_RD__snmp__active 1 +#define R_VECT_MASK_RD__snmp__inactive 0 +#define R_VECT_MASK_RD__network__BITNR 6 +#define R_VECT_MASK_RD__network__WIDTH 1 +#define R_VECT_MASK_RD__network__active 1 +#define R_VECT_MASK_RD__network__inactive 0 +#define R_VECT_MASK_RD__scsi1__BITNR 5 +#define R_VECT_MASK_RD__scsi1__WIDTH 1 +#define R_VECT_MASK_RD__scsi1__active 1 +#define R_VECT_MASK_RD__scsi1__inactive 0 +#define R_VECT_MASK_RD__par1__BITNR 5 +#define R_VECT_MASK_RD__par1__WIDTH 1 +#define R_VECT_MASK_RD__par1__active 1 +#define R_VECT_MASK_RD__par1__inactive 0 +#define R_VECT_MASK_RD__scsi0__BITNR 4 +#define R_VECT_MASK_RD__scsi0__WIDTH 1 +#define R_VECT_MASK_RD__scsi0__active 1 +#define R_VECT_MASK_RD__scsi0__inactive 0 +#define R_VECT_MASK_RD__par0__BITNR 4 +#define R_VECT_MASK_RD__par0__WIDTH 1 +#define R_VECT_MASK_RD__par0__active 1 +#define R_VECT_MASK_RD__par0__inactive 0 +#define R_VECT_MASK_RD__ata__BITNR 4 +#define R_VECT_MASK_RD__ata__WIDTH 1 +#define R_VECT_MASK_RD__ata__active 1 +#define R_VECT_MASK_RD__ata__inactive 0 +#define R_VECT_MASK_RD__mio__BITNR 4 +#define R_VECT_MASK_RD__mio__WIDTH 1 +#define R_VECT_MASK_RD__mio__active 1 +#define R_VECT_MASK_RD__mio__inactive 0 +#define R_VECT_MASK_RD__timer1__BITNR 3 +#define R_VECT_MASK_RD__timer1__WIDTH 1 +#define R_VECT_MASK_RD__timer1__active 1 +#define R_VECT_MASK_RD__timer1__inactive 0 +#define R_VECT_MASK_RD__timer0__BITNR 2 +#define R_VECT_MASK_RD__timer0__WIDTH 1 +#define R_VECT_MASK_RD__timer0__active 1 +#define R_VECT_MASK_RD__timer0__inactive 0 +#define R_VECT_MASK_RD__nmi__BITNR 1 +#define R_VECT_MASK_RD__nmi__WIDTH 1 +#define R_VECT_MASK_RD__nmi__active 1 +#define R_VECT_MASK_RD__nmi__inactive 0 +#define R_VECT_MASK_RD__some__BITNR 0 +#define R_VECT_MASK_RD__some__WIDTH 1 +#define R_VECT_MASK_RD__some__active 1 +#define R_VECT_MASK_RD__some__inactive 0 + +#define R_VECT_MASK_CLR (IO_TYPECAST_UDWORD 0xb00000d8) +#define R_VECT_MASK_CLR__usb__BITNR 31 +#define R_VECT_MASK_CLR__usb__WIDTH 1 +#define R_VECT_MASK_CLR__usb__clr 1 +#define R_VECT_MASK_CLR__usb__nop 0 +#define R_VECT_MASK_CLR__dma9__BITNR 25 +#define R_VECT_MASK_CLR__dma9__WIDTH 1 +#define R_VECT_MASK_CLR__dma9__clr 1 +#define R_VECT_MASK_CLR__dma9__nop 0 +#define R_VECT_MASK_CLR__dma8__BITNR 24 +#define R_VECT_MASK_CLR__dma8__WIDTH 1 +#define R_VECT_MASK_CLR__dma8__clr 1 +#define R_VECT_MASK_CLR__dma8__nop 0 +#define R_VECT_MASK_CLR__dma7__BITNR 23 +#define R_VECT_MASK_CLR__dma7__WIDTH 1 +#define R_VECT_MASK_CLR__dma7__clr 1 +#define R_VECT_MASK_CLR__dma7__nop 0 +#define R_VECT_MASK_CLR__dma6__BITNR 22 +#define R_VECT_MASK_CLR__dma6__WIDTH 1 +#define R_VECT_MASK_CLR__dma6__clr 1 +#define R_VECT_MASK_CLR__dma6__nop 0 +#define R_VECT_MASK_CLR__dma5__BITNR 21 +#define R_VECT_MASK_CLR__dma5__WIDTH 1 +#define R_VECT_MASK_CLR__dma5__clr 1 +#define R_VECT_MASK_CLR__dma5__nop 0 +#define R_VECT_MASK_CLR__dma4__BITNR 20 +#define R_VECT_MASK_CLR__dma4__WIDTH 1 +#define R_VECT_MASK_CLR__dma4__clr 1 +#define R_VECT_MASK_CLR__dma4__nop 0 +#define R_VECT_MASK_CLR__dma3__BITNR 19 +#define R_VECT_MASK_CLR__dma3__WIDTH 1 +#define R_VECT_MASK_CLR__dma3__clr 1 +#define R_VECT_MASK_CLR__dma3__nop 0 +#define R_VECT_MASK_CLR__dma2__BITNR 18 +#define R_VECT_MASK_CLR__dma2__WIDTH 1 +#define R_VECT_MASK_CLR__dma2__clr 1 +#define R_VECT_MASK_CLR__dma2__nop 0 +#define R_VECT_MASK_CLR__dma1__BITNR 17 +#define R_VECT_MASK_CLR__dma1__WIDTH 1 +#define R_VECT_MASK_CLR__dma1__clr 1 +#define R_VECT_MASK_CLR__dma1__nop 0 +#define R_VECT_MASK_CLR__dma0__BITNR 16 +#define R_VECT_MASK_CLR__dma0__WIDTH 1 +#define R_VECT_MASK_CLR__dma0__clr 1 +#define R_VECT_MASK_CLR__dma0__nop 0 +#define R_VECT_MASK_CLR__ext_dma1__BITNR 13 +#define R_VECT_MASK_CLR__ext_dma1__WIDTH 1 +#define R_VECT_MASK_CLR__ext_dma1__clr 1 +#define R_VECT_MASK_CLR__ext_dma1__nop 0 +#define R_VECT_MASK_CLR__ext_dma0__BITNR 12 +#define R_VECT_MASK_CLR__ext_dma0__WIDTH 1 +#define R_VECT_MASK_CLR__ext_dma0__clr 1 +#define R_VECT_MASK_CLR__ext_dma0__nop 0 +#define R_VECT_MASK_CLR__pa__BITNR 11 +#define R_VECT_MASK_CLR__pa__WIDTH 1 +#define R_VECT_MASK_CLR__pa__clr 1 +#define R_VECT_MASK_CLR__pa__nop 0 +#define R_VECT_MASK_CLR__irq_intnr__BITNR 10 +#define R_VECT_MASK_CLR__irq_intnr__WIDTH 1 +#define R_VECT_MASK_CLR__irq_intnr__clr 1 +#define R_VECT_MASK_CLR__irq_intnr__nop 0 +#define R_VECT_MASK_CLR__sw__BITNR 9 +#define R_VECT_MASK_CLR__sw__WIDTH 1 +#define R_VECT_MASK_CLR__sw__clr 1 +#define R_VECT_MASK_CLR__sw__nop 0 +#define R_VECT_MASK_CLR__serial__BITNR 8 +#define R_VECT_MASK_CLR__serial__WIDTH 1 +#define R_VECT_MASK_CLR__serial__clr 1 +#define R_VECT_MASK_CLR__serial__nop 0 +#define R_VECT_MASK_CLR__snmp__BITNR 7 +#define R_VECT_MASK_CLR__snmp__WIDTH 1 +#define R_VECT_MASK_CLR__snmp__clr 1 +#define R_VECT_MASK_CLR__snmp__nop 0 +#define R_VECT_MASK_CLR__network__BITNR 6 +#define R_VECT_MASK_CLR__network__WIDTH 1 +#define R_VECT_MASK_CLR__network__clr 1 +#define R_VECT_MASK_CLR__network__nop 0 +#define R_VECT_MASK_CLR__scsi1__BITNR 5 +#define R_VECT_MASK_CLR__scsi1__WIDTH 1 +#define R_VECT_MASK_CLR__scsi1__clr 1 +#define R_VECT_MASK_CLR__scsi1__nop 0 +#define R_VECT_MASK_CLR__par1__BITNR 5 +#define R_VECT_MASK_CLR__par1__WIDTH 1 +#define R_VECT_MASK_CLR__par1__clr 1 +#define R_VECT_MASK_CLR__par1__nop 0 +#define R_VECT_MASK_CLR__scsi0__BITNR 4 +#define R_VECT_MASK_CLR__scsi0__WIDTH 1 +#define R_VECT_MASK_CLR__scsi0__clr 1 +#define R_VECT_MASK_CLR__scsi0__nop 0 +#define R_VECT_MASK_CLR__par0__BITNR 4 +#define R_VECT_MASK_CLR__par0__WIDTH 1 +#define R_VECT_MASK_CLR__par0__clr 1 +#define R_VECT_MASK_CLR__par0__nop 0 +#define R_VECT_MASK_CLR__ata__BITNR 4 +#define R_VECT_MASK_CLR__ata__WIDTH 1 +#define R_VECT_MASK_CLR__ata__clr 1 +#define R_VECT_MASK_CLR__ata__nop 0 +#define R_VECT_MASK_CLR__mio__BITNR 4 +#define R_VECT_MASK_CLR__mio__WIDTH 1 +#define R_VECT_MASK_CLR__mio__clr 1 +#define R_VECT_MASK_CLR__mio__nop 0 +#define R_VECT_MASK_CLR__timer1__BITNR 3 +#define R_VECT_MASK_CLR__timer1__WIDTH 1 +#define R_VECT_MASK_CLR__timer1__clr 1 +#define R_VECT_MASK_CLR__timer1__nop 0 +#define R_VECT_MASK_CLR__timer0__BITNR 2 +#define R_VECT_MASK_CLR__timer0__WIDTH 1 +#define R_VECT_MASK_CLR__timer0__clr 1 +#define R_VECT_MASK_CLR__timer0__nop 0 +#define R_VECT_MASK_CLR__nmi__BITNR 1 +#define R_VECT_MASK_CLR__nmi__WIDTH 1 +#define R_VECT_MASK_CLR__nmi__clr 1 +#define R_VECT_MASK_CLR__nmi__nop 0 +#define R_VECT_MASK_CLR__some__BITNR 0 +#define R_VECT_MASK_CLR__some__WIDTH 1 +#define R_VECT_MASK_CLR__some__clr 1 +#define R_VECT_MASK_CLR__some__nop 0 + +#define R_VECT_READ (IO_TYPECAST_RO_UDWORD 0xb00000dc) +#define R_VECT_READ__usb__BITNR 31 +#define R_VECT_READ__usb__WIDTH 1 +#define R_VECT_READ__usb__active 1 +#define R_VECT_READ__usb__inactive 0 +#define R_VECT_READ__dma9__BITNR 25 +#define R_VECT_READ__dma9__WIDTH 1 +#define R_VECT_READ__dma9__active 1 +#define R_VECT_READ__dma9__inactive 0 +#define R_VECT_READ__dma8__BITNR 24 +#define R_VECT_READ__dma8__WIDTH 1 +#define R_VECT_READ__dma8__active 1 +#define R_VECT_READ__dma8__inactive 0 +#define R_VECT_READ__dma7__BITNR 23 +#define R_VECT_READ__dma7__WIDTH 1 +#define R_VECT_READ__dma7__active 1 +#define R_VECT_READ__dma7__inactive 0 +#define R_VECT_READ__dma6__BITNR 22 +#define R_VECT_READ__dma6__WIDTH 1 +#define R_VECT_READ__dma6__active 1 +#define R_VECT_READ__dma6__inactive 0 +#define R_VECT_READ__dma5__BITNR 21 +#define R_VECT_READ__dma5__WIDTH 1 +#define R_VECT_READ__dma5__active 1 +#define R_VECT_READ__dma5__inactive 0 +#define R_VECT_READ__dma4__BITNR 20 +#define R_VECT_READ__dma4__WIDTH 1 +#define R_VECT_READ__dma4__active 1 +#define R_VECT_READ__dma4__inactive 0 +#define R_VECT_READ__dma3__BITNR 19 +#define R_VECT_READ__dma3__WIDTH 1 +#define R_VECT_READ__dma3__active 1 +#define R_VECT_READ__dma3__inactive 0 +#define R_VECT_READ__dma2__BITNR 18 +#define R_VECT_READ__dma2__WIDTH 1 +#define R_VECT_READ__dma2__active 1 +#define R_VECT_READ__dma2__inactive 0 +#define R_VECT_READ__dma1__BITNR 17 +#define R_VECT_READ__dma1__WIDTH 1 +#define R_VECT_READ__dma1__active 1 +#define R_VECT_READ__dma1__inactive 0 +#define R_VECT_READ__dma0__BITNR 16 +#define R_VECT_READ__dma0__WIDTH 1 +#define R_VECT_READ__dma0__active 1 +#define R_VECT_READ__dma0__inactive 0 +#define R_VECT_READ__ext_dma1__BITNR 13 +#define R_VECT_READ__ext_dma1__WIDTH 1 +#define R_VECT_READ__ext_dma1__active 1 +#define R_VECT_READ__ext_dma1__inactive 0 +#define R_VECT_READ__ext_dma0__BITNR 12 +#define R_VECT_READ__ext_dma0__WIDTH 1 +#define R_VECT_READ__ext_dma0__active 1 +#define R_VECT_READ__ext_dma0__inactive 0 +#define R_VECT_READ__pa__BITNR 11 +#define R_VECT_READ__pa__WIDTH 1 +#define R_VECT_READ__pa__active 1 +#define R_VECT_READ__pa__inactive 0 +#define R_VECT_READ__irq_intnr__BITNR 10 +#define R_VECT_READ__irq_intnr__WIDTH 1 +#define R_VECT_READ__irq_intnr__active 1 +#define R_VECT_READ__irq_intnr__inactive 0 +#define R_VECT_READ__sw__BITNR 9 +#define R_VECT_READ__sw__WIDTH 1 +#define R_VECT_READ__sw__active 1 +#define R_VECT_READ__sw__inactive 0 +#define R_VECT_READ__serial__BITNR 8 +#define R_VECT_READ__serial__WIDTH 1 +#define R_VECT_READ__serial__active 1 +#define R_VECT_READ__serial__inactive 0 +#define R_VECT_READ__snmp__BITNR 7 +#define R_VECT_READ__snmp__WIDTH 1 +#define R_VECT_READ__snmp__active 1 +#define R_VECT_READ__snmp__inactive 0 +#define R_VECT_READ__network__BITNR 6 +#define R_VECT_READ__network__WIDTH 1 +#define R_VECT_READ__network__active 1 +#define R_VECT_READ__network__inactive 0 +#define R_VECT_READ__scsi1__BITNR 5 +#define R_VECT_READ__scsi1__WIDTH 1 +#define R_VECT_READ__scsi1__active 1 +#define R_VECT_READ__scsi1__inactive 0 +#define R_VECT_READ__par1__BITNR 5 +#define R_VECT_READ__par1__WIDTH 1 +#define R_VECT_READ__par1__active 1 +#define R_VECT_READ__par1__inactive 0 +#define R_VECT_READ__scsi0__BITNR 4 +#define R_VECT_READ__scsi0__WIDTH 1 +#define R_VECT_READ__scsi0__active 1 +#define R_VECT_READ__scsi0__inactive 0 +#define R_VECT_READ__par0__BITNR 4 +#define R_VECT_READ__par0__WIDTH 1 +#define R_VECT_READ__par0__active 1 +#define R_VECT_READ__par0__inactive 0 +#define R_VECT_READ__ata__BITNR 4 +#define R_VECT_READ__ata__WIDTH 1 +#define R_VECT_READ__ata__active 1 +#define R_VECT_READ__ata__inactive 0 +#define R_VECT_READ__mio__BITNR 4 +#define R_VECT_READ__mio__WIDTH 1 +#define R_VECT_READ__mio__active 1 +#define R_VECT_READ__mio__inactive 0 +#define R_VECT_READ__timer1__BITNR 3 +#define R_VECT_READ__timer1__WIDTH 1 +#define R_VECT_READ__timer1__active 1 +#define R_VECT_READ__timer1__inactive 0 +#define R_VECT_READ__timer0__BITNR 2 +#define R_VECT_READ__timer0__WIDTH 1 +#define R_VECT_READ__timer0__active 1 +#define R_VECT_READ__timer0__inactive 0 +#define R_VECT_READ__nmi__BITNR 1 +#define R_VECT_READ__nmi__WIDTH 1 +#define R_VECT_READ__nmi__active 1 +#define R_VECT_READ__nmi__inactive 0 +#define R_VECT_READ__some__BITNR 0 +#define R_VECT_READ__some__WIDTH 1 +#define R_VECT_READ__some__active 1 +#define R_VECT_READ__some__inactive 0 + +#define R_VECT_MASK_SET (IO_TYPECAST_UDWORD 0xb00000dc) +#define R_VECT_MASK_SET__usb__BITNR 31 +#define R_VECT_MASK_SET__usb__WIDTH 1 +#define R_VECT_MASK_SET__usb__set 1 +#define R_VECT_MASK_SET__usb__nop 0 +#define R_VECT_MASK_SET__dma9__BITNR 25 +#define R_VECT_MASK_SET__dma9__WIDTH 1 +#define R_VECT_MASK_SET__dma9__set 1 +#define R_VECT_MASK_SET__dma9__nop 0 +#define R_VECT_MASK_SET__dma8__BITNR 24 +#define R_VECT_MASK_SET__dma8__WIDTH 1 +#define R_VECT_MASK_SET__dma8__set 1 +#define R_VECT_MASK_SET__dma8__nop 0 +#define R_VECT_MASK_SET__dma7__BITNR 23 +#define R_VECT_MASK_SET__dma7__WIDTH 1 +#define R_VECT_MASK_SET__dma7__set 1 +#define R_VECT_MASK_SET__dma7__nop 0 +#define R_VECT_MASK_SET__dma6__BITNR 22 +#define R_VECT_MASK_SET__dma6__WIDTH 1 +#define R_VECT_MASK_SET__dma6__set 1 +#define R_VECT_MASK_SET__dma6__nop 0 +#define R_VECT_MASK_SET__dma5__BITNR 21 +#define R_VECT_MASK_SET__dma5__WIDTH 1 +#define R_VECT_MASK_SET__dma5__set 1 +#define R_VECT_MASK_SET__dma5__nop 0 +#define R_VECT_MASK_SET__dma4__BITNR 20 +#define R_VECT_MASK_SET__dma4__WIDTH 1 +#define R_VECT_MASK_SET__dma4__set 1 +#define R_VECT_MASK_SET__dma4__nop 0 +#define R_VECT_MASK_SET__dma3__BITNR 19 +#define R_VECT_MASK_SET__dma3__WIDTH 1 +#define R_VECT_MASK_SET__dma3__set 1 +#define R_VECT_MASK_SET__dma3__nop 0 +#define R_VECT_MASK_SET__dma2__BITNR 18 +#define R_VECT_MASK_SET__dma2__WIDTH 1 +#define R_VECT_MASK_SET__dma2__set 1 +#define R_VECT_MASK_SET__dma2__nop 0 +#define R_VECT_MASK_SET__dma1__BITNR 17 +#define R_VECT_MASK_SET__dma1__WIDTH 1 +#define R_VECT_MASK_SET__dma1__set 1 +#define R_VECT_MASK_SET__dma1__nop 0 +#define R_VECT_MASK_SET__dma0__BITNR 16 +#define R_VECT_MASK_SET__dma0__WIDTH 1 +#define R_VECT_MASK_SET__dma0__set 1 +#define R_VECT_MASK_SET__dma0__nop 0 +#define R_VECT_MASK_SET__ext_dma1__BITNR 13 +#define R_VECT_MASK_SET__ext_dma1__WIDTH 1 +#define R_VECT_MASK_SET__ext_dma1__set 1 +#define R_VECT_MASK_SET__ext_dma1__nop 0 +#define R_VECT_MASK_SET__ext_dma0__BITNR 12 +#define R_VECT_MASK_SET__ext_dma0__WIDTH 1 +#define R_VECT_MASK_SET__ext_dma0__set 1 +#define R_VECT_MASK_SET__ext_dma0__nop 0 +#define R_VECT_MASK_SET__pa__BITNR 11 +#define R_VECT_MASK_SET__pa__WIDTH 1 +#define R_VECT_MASK_SET__pa__set 1 +#define R_VECT_MASK_SET__pa__nop 0 +#define R_VECT_MASK_SET__irq_intnr__BITNR 10 +#define R_VECT_MASK_SET__irq_intnr__WIDTH 1 +#define R_VECT_MASK_SET__irq_intnr__set 1 +#define R_VECT_MASK_SET__irq_intnr__nop 0 +#define R_VECT_MASK_SET__sw__BITNR 9 +#define R_VECT_MASK_SET__sw__WIDTH 1 +#define R_VECT_MASK_SET__sw__set 1 +#define R_VECT_MASK_SET__sw__nop 0 +#define R_VECT_MASK_SET__serial__BITNR 8 +#define R_VECT_MASK_SET__serial__WIDTH 1 +#define R_VECT_MASK_SET__serial__set 1 +#define R_VECT_MASK_SET__serial__nop 0 +#define R_VECT_MASK_SET__snmp__BITNR 7 +#define R_VECT_MASK_SET__snmp__WIDTH 1 +#define R_VECT_MASK_SET__snmp__set 1 +#define R_VECT_MASK_SET__snmp__nop 0 +#define R_VECT_MASK_SET__network__BITNR 6 +#define R_VECT_MASK_SET__network__WIDTH 1 +#define R_VECT_MASK_SET__network__set 1 +#define R_VECT_MASK_SET__network__nop 0 +#define R_VECT_MASK_SET__scsi1__BITNR 5 +#define R_VECT_MASK_SET__scsi1__WIDTH 1 +#define R_VECT_MASK_SET__scsi1__set 1 +#define R_VECT_MASK_SET__scsi1__nop 0 +#define R_VECT_MASK_SET__par1__BITNR 5 +#define R_VECT_MASK_SET__par1__WIDTH 1 +#define R_VECT_MASK_SET__par1__set 1 +#define R_VECT_MASK_SET__par1__nop 0 +#define R_VECT_MASK_SET__scsi0__BITNR 4 +#define R_VECT_MASK_SET__scsi0__WIDTH 1 +#define R_VECT_MASK_SET__scsi0__set 1 +#define R_VECT_MASK_SET__scsi0__nop 0 +#define R_VECT_MASK_SET__par0__BITNR 4 +#define R_VECT_MASK_SET__par0__WIDTH 1 +#define R_VECT_MASK_SET__par0__set 1 +#define R_VECT_MASK_SET__par0__nop 0 +#define R_VECT_MASK_SET__ata__BITNR 4 +#define R_VECT_MASK_SET__ata__WIDTH 1 +#define R_VECT_MASK_SET__ata__set 1 +#define R_VECT_MASK_SET__ata__nop 0 +#define R_VECT_MASK_SET__mio__BITNR 4 +#define R_VECT_MASK_SET__mio__WIDTH 1 +#define R_VECT_MASK_SET__mio__set 1 +#define R_VECT_MASK_SET__mio__nop 0 +#define R_VECT_MASK_SET__timer1__BITNR 3 +#define R_VECT_MASK_SET__timer1__WIDTH 1 +#define R_VECT_MASK_SET__timer1__set 1 +#define R_VECT_MASK_SET__timer1__nop 0 +#define R_VECT_MASK_SET__timer0__BITNR 2 +#define R_VECT_MASK_SET__timer0__WIDTH 1 +#define R_VECT_MASK_SET__timer0__set 1 +#define R_VECT_MASK_SET__timer0__nop 0 +#define R_VECT_MASK_SET__nmi__BITNR 1 +#define R_VECT_MASK_SET__nmi__WIDTH 1 +#define R_VECT_MASK_SET__nmi__set 1 +#define R_VECT_MASK_SET__nmi__nop 0 +#define R_VECT_MASK_SET__some__BITNR 0 +#define R_VECT_MASK_SET__some__WIDTH 1 +#define R_VECT_MASK_SET__some__set 1 +#define R_VECT_MASK_SET__some__nop 0 + +/* +!* DMA registers +!*/ + +#define R_SET_EOP (IO_TYPECAST_UDWORD 0xb000003c) +#define R_SET_EOP__ch9_eop__BITNR 3 +#define R_SET_EOP__ch9_eop__WIDTH 1 +#define R_SET_EOP__ch9_eop__set 1 +#define R_SET_EOP__ch9_eop__nop 0 +#define R_SET_EOP__ch7_eop__BITNR 2 +#define R_SET_EOP__ch7_eop__WIDTH 1 +#define R_SET_EOP__ch7_eop__set 1 +#define R_SET_EOP__ch7_eop__nop 0 +#define R_SET_EOP__ch5_eop__BITNR 1 +#define R_SET_EOP__ch5_eop__WIDTH 1 +#define R_SET_EOP__ch5_eop__set 1 +#define R_SET_EOP__ch5_eop__nop 0 +#define R_SET_EOP__ch3_eop__BITNR 0 +#define R_SET_EOP__ch3_eop__WIDTH 1 +#define R_SET_EOP__ch3_eop__set 1 +#define R_SET_EOP__ch3_eop__nop 0 + +#define R_DMA_CH0_HWSW (IO_TYPECAST_UDWORD 0xb0000100) +#define R_DMA_CH0_HWSW__hw__BITNR 16 +#define R_DMA_CH0_HWSW__hw__WIDTH 16 +#define R_DMA_CH0_HWSW__sw__BITNR 0 +#define R_DMA_CH0_HWSW__sw__WIDTH 16 + +#define R_DMA_CH0_DESCR (IO_TYPECAST_UDWORD 0xb000010c) +#define R_DMA_CH0_DESCR__descr__BITNR 0 +#define R_DMA_CH0_DESCR__descr__WIDTH 32 + +#define R_DMA_CH0_NEXT (IO_TYPECAST_UDWORD 0xb0000104) +#define R_DMA_CH0_NEXT__next__BITNR 0 +#define R_DMA_CH0_NEXT__next__WIDTH 32 + +#define R_DMA_CH0_BUF (IO_TYPECAST_UDWORD 0xb0000108) +#define R_DMA_CH0_BUF__buf__BITNR 0 +#define R_DMA_CH0_BUF__buf__WIDTH 32 + +#define R_DMA_CH0_FIRST (IO_TYPECAST_UDWORD 0xb00001a0) +#define R_DMA_CH0_FIRST__first__BITNR 0 +#define R_DMA_CH0_FIRST__first__WIDTH 32 + +#define R_DMA_CH0_CMD (IO_TYPECAST_BYTE 0xb00001d0) +#define R_DMA_CH0_CMD__cmd__BITNR 0 +#define R_DMA_CH0_CMD__cmd__WIDTH 3 +#define R_DMA_CH0_CMD__cmd__hold 0 +#define R_DMA_CH0_CMD__cmd__start 1 +#define R_DMA_CH0_CMD__cmd__restart 3 +#define R_DMA_CH0_CMD__cmd__continue 3 +#define R_DMA_CH0_CMD__cmd__reset 4 + +#define R_DMA_CH0_CLR_INTR (IO_TYPECAST_BYTE 0xb00001d1) +#define R_DMA_CH0_CLR_INTR__clr_eop__BITNR 1 +#define R_DMA_CH0_CLR_INTR__clr_eop__WIDTH 1 +#define R_DMA_CH0_CLR_INTR__clr_eop__do 1 +#define R_DMA_CH0_CLR_INTR__clr_eop__dont 0 +#define R_DMA_CH0_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH0_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH0_CLR_INTR__clr_descr__do 1 +#define R_DMA_CH0_CLR_INTR__clr_descr__dont 0 + +#define R_DMA_CH0_STATUS (IO_TYPECAST_RO_BYTE 0xb00001d2) +#define R_DMA_CH0_STATUS__avail__BITNR 0 +#define R_DMA_CH0_STATUS__avail__WIDTH 7 + +#define R_DMA_CH1_HWSW (IO_TYPECAST_UDWORD 0xb0000110) +#define R_DMA_CH1_HWSW__hw__BITNR 16 +#define R_DMA_CH1_HWSW__hw__WIDTH 16 +#define R_DMA_CH1_HWSW__sw__BITNR 0 +#define R_DMA_CH1_HWSW__sw__WIDTH 16 + +#define R_DMA_CH1_DESCR (IO_TYPECAST_UDWORD 0xb000011c) +#define R_DMA_CH1_DESCR__descr__BITNR 0 +#define R_DMA_CH1_DESCR__descr__WIDTH 32 + +#define R_DMA_CH1_NEXT (IO_TYPECAST_UDWORD 0xb0000114) +#define R_DMA_CH1_NEXT__next__BITNR 0 +#define R_DMA_CH1_NEXT__next__WIDTH 32 + +#define R_DMA_CH1_BUF (IO_TYPECAST_UDWORD 0xb0000118) +#define R_DMA_CH1_BUF__buf__BITNR 0 +#define R_DMA_CH1_BUF__buf__WIDTH 32 + +#define R_DMA_CH1_FIRST (IO_TYPECAST_UDWORD 0xb00001a4) +#define R_DMA_CH1_FIRST__first__BITNR 0 +#define R_DMA_CH1_FIRST__first__WIDTH 32 + +#define R_DMA_CH1_CMD (IO_TYPECAST_BYTE 0xb00001d4) +#define R_DMA_CH1_CMD__cmd__BITNR 0 +#define R_DMA_CH1_CMD__cmd__WIDTH 3 +#define R_DMA_CH1_CMD__cmd__hold 0 +#define R_DMA_CH1_CMD__cmd__start 1 +#define R_DMA_CH1_CMD__cmd__restart 3 +#define R_DMA_CH1_CMD__cmd__continue 3 +#define R_DMA_CH1_CMD__cmd__reset 4 + +#define R_DMA_CH1_CLR_INTR (IO_TYPECAST_BYTE 0xb00001d5) +#define R_DMA_CH1_CLR_INTR__clr_eop__BITNR 1 +#define R_DMA_CH1_CLR_INTR__clr_eop__WIDTH 1 +#define R_DMA_CH1_CLR_INTR__clr_eop__do 1 +#define R_DMA_CH1_CLR_INTR__clr_eop__dont 0 +#define R_DMA_CH1_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH1_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH1_CLR_INTR__clr_descr__do 1 +#define R_DMA_CH1_CLR_INTR__clr_descr__dont 0 + +#define R_DMA_CH1_STATUS (IO_TYPECAST_RO_BYTE 0xb00001d6) +#define R_DMA_CH1_STATUS__avail__BITNR 0 +#define R_DMA_CH1_STATUS__avail__WIDTH 7 + +#define R_DMA_CH2_HWSW (IO_TYPECAST_UDWORD 0xb0000120) +#define R_DMA_CH2_HWSW__hw__BITNR 16 +#define R_DMA_CH2_HWSW__hw__WIDTH 16 +#define R_DMA_CH2_HWSW__sw__BITNR 0 +#define R_DMA_CH2_HWSW__sw__WIDTH 16 + +#define R_DMA_CH2_DESCR (IO_TYPECAST_UDWORD 0xb000012c) +#define R_DMA_CH2_DESCR__descr__BITNR 0 +#define R_DMA_CH2_DESCR__descr__WIDTH 32 + +#define R_DMA_CH2_NEXT (IO_TYPECAST_UDWORD 0xb0000124) +#define R_DMA_CH2_NEXT__next__BITNR 0 +#define R_DMA_CH2_NEXT__next__WIDTH 32 + +#define R_DMA_CH2_BUF (IO_TYPECAST_UDWORD 0xb0000128) +#define R_DMA_CH2_BUF__buf__BITNR 0 +#define R_DMA_CH2_BUF__buf__WIDTH 32 + +#define R_DMA_CH2_FIRST (IO_TYPECAST_UDWORD 0xb00001a8) +#define R_DMA_CH2_FIRST__first__BITNR 0 +#define R_DMA_CH2_FIRST__first__WIDTH 32 + +#define R_DMA_CH2_CMD (IO_TYPECAST_BYTE 0xb00001d8) +#define R_DMA_CH2_CMD__cmd__BITNR 0 +#define R_DMA_CH2_CMD__cmd__WIDTH 3 +#define R_DMA_CH2_CMD__cmd__hold 0 +#define R_DMA_CH2_CMD__cmd__start 1 +#define R_DMA_CH2_CMD__cmd__restart 3 +#define R_DMA_CH2_CMD__cmd__continue 3 +#define R_DMA_CH2_CMD__cmd__reset 4 + +#define R_DMA_CH2_CLR_INTR (IO_TYPECAST_BYTE 0xb00001d9) +#define R_DMA_CH2_CLR_INTR__clr_eop__BITNR 1 +#define R_DMA_CH2_CLR_INTR__clr_eop__WIDTH 1 +#define R_DMA_CH2_CLR_INTR__clr_eop__do 1 +#define R_DMA_CH2_CLR_INTR__clr_eop__dont 0 +#define R_DMA_CH2_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH2_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH2_CLR_INTR__clr_descr__do 1 +#define R_DMA_CH2_CLR_INTR__clr_descr__dont 0 + +#define R_DMA_CH2_STATUS (IO_TYPECAST_RO_BYTE 0xb00001da) +#define R_DMA_CH2_STATUS__avail__BITNR 0 +#define R_DMA_CH2_STATUS__avail__WIDTH 7 + +#define R_DMA_CH3_HWSW (IO_TYPECAST_UDWORD 0xb0000130) +#define R_DMA_CH3_HWSW__hw__BITNR 16 +#define R_DMA_CH3_HWSW__hw__WIDTH 16 +#define R_DMA_CH3_HWSW__sw__BITNR 0 +#define R_DMA_CH3_HWSW__sw__WIDTH 16 + +#define R_DMA_CH3_DESCR (IO_TYPECAST_UDWORD 0xb000013c) +#define R_DMA_CH3_DESCR__descr__BITNR 0 +#define R_DMA_CH3_DESCR__descr__WIDTH 32 + +#define R_DMA_CH3_NEXT (IO_TYPECAST_UDWORD 0xb0000134) +#define R_DMA_CH3_NEXT__next__BITNR 0 +#define R_DMA_CH3_NEXT__next__WIDTH 32 + +#define R_DMA_CH3_BUF (IO_TYPECAST_UDWORD 0xb0000138) +#define R_DMA_CH3_BUF__buf__BITNR 0 +#define R_DMA_CH3_BUF__buf__WIDTH 32 + +#define R_DMA_CH3_FIRST (IO_TYPECAST_UDWORD 0xb00001ac) +#define R_DMA_CH3_FIRST__first__BITNR 0 +#define R_DMA_CH3_FIRST__first__WIDTH 32 + +#define R_DMA_CH3_CMD (IO_TYPECAST_BYTE 0xb00001dc) +#define R_DMA_CH3_CMD__cmd__BITNR 0 +#define R_DMA_CH3_CMD__cmd__WIDTH 3 +#define R_DMA_CH3_CMD__cmd__hold 0 +#define R_DMA_CH3_CMD__cmd__start 1 +#define R_DMA_CH3_CMD__cmd__restart 3 +#define R_DMA_CH3_CMD__cmd__continue 3 +#define R_DMA_CH3_CMD__cmd__reset 4 + +#define R_DMA_CH3_CLR_INTR (IO_TYPECAST_BYTE 0xb00001dd) +#define R_DMA_CH3_CLR_INTR__clr_eop__BITNR 1 +#define R_DMA_CH3_CLR_INTR__clr_eop__WIDTH 1 +#define R_DMA_CH3_CLR_INTR__clr_eop__do 1 +#define R_DMA_CH3_CLR_INTR__clr_eop__dont 0 +#define R_DMA_CH3_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH3_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH3_CLR_INTR__clr_descr__do 1 +#define R_DMA_CH3_CLR_INTR__clr_descr__dont 0 + +#define R_DMA_CH3_STATUS (IO_TYPECAST_RO_BYTE 0xb00001de) +#define R_DMA_CH3_STATUS__avail__BITNR 0 +#define R_DMA_CH3_STATUS__avail__WIDTH 7 + +#define R_DMA_CH4_HWSW (IO_TYPECAST_UDWORD 0xb0000140) +#define R_DMA_CH4_HWSW__hw__BITNR 16 +#define R_DMA_CH4_HWSW__hw__WIDTH 16 +#define R_DMA_CH4_HWSW__sw__BITNR 0 +#define R_DMA_CH4_HWSW__sw__WIDTH 16 + +#define R_DMA_CH4_DESCR (IO_TYPECAST_UDWORD 0xb000014c) +#define R_DMA_CH4_DESCR__descr__BITNR 0 +#define R_DMA_CH4_DESCR__descr__WIDTH 32 + +#define R_DMA_CH4_NEXT (IO_TYPECAST_UDWORD 0xb0000144) +#define R_DMA_CH4_NEXT__next__BITNR 0 +#define R_DMA_CH4_NEXT__next__WIDTH 32 + +#define R_DMA_CH4_BUF (IO_TYPECAST_UDWORD 0xb0000148) +#define R_DMA_CH4_BUF__buf__BITNR 0 +#define R_DMA_CH4_BUF__buf__WIDTH 32 + +#define R_DMA_CH4_FIRST (IO_TYPECAST_UDWORD 0xb00001b0) +#define R_DMA_CH4_FIRST__first__BITNR 0 +#define R_DMA_CH4_FIRST__first__WIDTH 32 + +#define R_DMA_CH4_CMD (IO_TYPECAST_BYTE 0xb00001e0) +#define R_DMA_CH4_CMD__cmd__BITNR 0 +#define R_DMA_CH4_CMD__cmd__WIDTH 3 +#define R_DMA_CH4_CMD__cmd__hold 0 +#define R_DMA_CH4_CMD__cmd__start 1 +#define R_DMA_CH4_CMD__cmd__restart 3 +#define R_DMA_CH4_CMD__cmd__continue 3 +#define R_DMA_CH4_CMD__cmd__reset 4 + +#define R_DMA_CH4_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e1) +#define R_DMA_CH4_CLR_INTR__clr_eop__BITNR 1 +#define R_DMA_CH4_CLR_INTR__clr_eop__WIDTH 1 +#define R_DMA_CH4_CLR_INTR__clr_eop__do 1 +#define R_DMA_CH4_CLR_INTR__clr_eop__dont 0 +#define R_DMA_CH4_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH4_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH4_CLR_INTR__clr_descr__do 1 +#define R_DMA_CH4_CLR_INTR__clr_descr__dont 0 + +#define R_DMA_CH4_STATUS (IO_TYPECAST_RO_BYTE 0xb00001e2) +#define R_DMA_CH4_STATUS__avail__BITNR 0 +#define R_DMA_CH4_STATUS__avail__WIDTH 7 + +#define R_DMA_CH5_HWSW (IO_TYPECAST_UDWORD 0xb0000150) +#define R_DMA_CH5_HWSW__hw__BITNR 16 +#define R_DMA_CH5_HWSW__hw__WIDTH 16 +#define R_DMA_CH5_HWSW__sw__BITNR 0 +#define R_DMA_CH5_HWSW__sw__WIDTH 16 + +#define R_DMA_CH5_DESCR (IO_TYPECAST_UDWORD 0xb000015c) +#define R_DMA_CH5_DESCR__descr__BITNR 0 +#define R_DMA_CH5_DESCR__descr__WIDTH 32 + +#define R_DMA_CH5_NEXT (IO_TYPECAST_UDWORD 0xb0000154) +#define R_DMA_CH5_NEXT__next__BITNR 0 +#define R_DMA_CH5_NEXT__next__WIDTH 32 + +#define R_DMA_CH5_BUF (IO_TYPECAST_UDWORD 0xb0000158) +#define R_DMA_CH5_BUF__buf__BITNR 0 +#define R_DMA_CH5_BUF__buf__WIDTH 32 + +#define R_DMA_CH5_FIRST (IO_TYPECAST_UDWORD 0xb00001b4) +#define R_DMA_CH5_FIRST__first__BITNR 0 +#define R_DMA_CH5_FIRST__first__WIDTH 32 + +#define R_DMA_CH5_CMD (IO_TYPECAST_BYTE 0xb00001e4) +#define R_DMA_CH5_CMD__cmd__BITNR 0 +#define R_DMA_CH5_CMD__cmd__WIDTH 3 +#define R_DMA_CH5_CMD__cmd__hold 0 +#define R_DMA_CH5_CMD__cmd__start 1 +#define R_DMA_CH5_CMD__cmd__restart 3 +#define R_DMA_CH5_CMD__cmd__continue 3 +#define R_DMA_CH5_CMD__cmd__reset 4 + +#define R_DMA_CH5_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e5) +#define R_DMA_CH5_CLR_INTR__clr_eop__BITNR 1 +#define R_DMA_CH5_CLR_INTR__clr_eop__WIDTH 1 +#define R_DMA_CH5_CLR_INTR__clr_eop__do 1 +#define R_DMA_CH5_CLR_INTR__clr_eop__dont 0 +#define R_DMA_CH5_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH5_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH5_CLR_INTR__clr_descr__do 1 +#define R_DMA_CH5_CLR_INTR__clr_descr__dont 0 + +#define R_DMA_CH5_STATUS (IO_TYPECAST_RO_BYTE 0xb00001e6) +#define R_DMA_CH5_STATUS__avail__BITNR 0 +#define R_DMA_CH5_STATUS__avail__WIDTH 7 + +#define R_DMA_CH6_HWSW (IO_TYPECAST_UDWORD 0xb0000160) +#define R_DMA_CH6_HWSW__hw__BITNR 16 +#define R_DMA_CH6_HWSW__hw__WIDTH 16 +#define R_DMA_CH6_HWSW__sw__BITNR 0 +#define R_DMA_CH6_HWSW__sw__WIDTH 16 + +#define R_DMA_CH6_DESCR (IO_TYPECAST_UDWORD 0xb000016c) +#define R_DMA_CH6_DESCR__descr__BITNR 0 +#define R_DMA_CH6_DESCR__descr__WIDTH 32 + +#define R_DMA_CH6_NEXT (IO_TYPECAST_UDWORD 0xb0000164) +#define R_DMA_CH6_NEXT__next__BITNR 0 +#define R_DMA_CH6_NEXT__next__WIDTH 32 + +#define R_DMA_CH6_BUF (IO_TYPECAST_UDWORD 0xb0000168) +#define R_DMA_CH6_BUF__buf__BITNR 0 +#define R_DMA_CH6_BUF__buf__WIDTH 32 + +#define R_DMA_CH6_FIRST (IO_TYPECAST_UDWORD 0xb00001b8) +#define R_DMA_CH6_FIRST__first__BITNR 0 +#define R_DMA_CH6_FIRST__first__WIDTH 32 + +#define R_DMA_CH6_CMD (IO_TYPECAST_BYTE 0xb00001e8) +#define R_DMA_CH6_CMD__cmd__BITNR 0 +#define R_DMA_CH6_CMD__cmd__WIDTH 3 +#define R_DMA_CH6_CMD__cmd__hold 0 +#define R_DMA_CH6_CMD__cmd__start 1 +#define R_DMA_CH6_CMD__cmd__restart 3 +#define R_DMA_CH6_CMD__cmd__continue 3 +#define R_DMA_CH6_CMD__cmd__reset 4 + +#define R_DMA_CH6_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e9) +#define R_DMA_CH6_CLR_INTR__clr_eop__BITNR 1 +#define R_DMA_CH6_CLR_INTR__clr_eop__WIDTH 1 +#define R_DMA_CH6_CLR_INTR__clr_eop__do 1 +#define R_DMA_CH6_CLR_INTR__clr_eop__dont 0 +#define R_DMA_CH6_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH6_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH6_CLR_INTR__clr_descr__do 1 +#define R_DMA_CH6_CLR_INTR__clr_descr__dont 0 + +#define R_DMA_CH6_STATUS (IO_TYPECAST_RO_BYTE 0xb00001ea) +#define R_DMA_CH6_STATUS__avail__BITNR 0 +#define R_DMA_CH6_STATUS__avail__WIDTH 7 + +#define R_DMA_CH7_HWSW (IO_TYPECAST_UDWORD 0xb0000170) +#define R_DMA_CH7_HWSW__hw__BITNR 16 +#define R_DMA_CH7_HWSW__hw__WIDTH 16 +#define R_DMA_CH7_HWSW__sw__BITNR 0 +#define R_DMA_CH7_HWSW__sw__WIDTH 16 + +#define R_DMA_CH7_DESCR (IO_TYPECAST_UDWORD 0xb000017c) +#define R_DMA_CH7_DESCR__descr__BITNR 0 +#define R_DMA_CH7_DESCR__descr__WIDTH 32 + +#define R_DMA_CH7_NEXT (IO_TYPECAST_UDWORD 0xb0000174) +#define R_DMA_CH7_NEXT__next__BITNR 0 +#define R_DMA_CH7_NEXT__next__WIDTH 32 + +#define R_DMA_CH7_BUF (IO_TYPECAST_UDWORD 0xb0000178) +#define R_DMA_CH7_BUF__buf__BITNR 0 +#define R_DMA_CH7_BUF__buf__WIDTH 32 + +#define R_DMA_CH7_FIRST (IO_TYPECAST_UDWORD 0xb00001bc) +#define R_DMA_CH7_FIRST__first__BITNR 0 +#define R_DMA_CH7_FIRST__first__WIDTH 32 + +#define R_DMA_CH7_CMD (IO_TYPECAST_BYTE 0xb00001ec) +#define R_DMA_CH7_CMD__cmd__BITNR 0 +#define R_DMA_CH7_CMD__cmd__WIDTH 3 +#define R_DMA_CH7_CMD__cmd__hold 0 +#define R_DMA_CH7_CMD__cmd__start 1 +#define R_DMA_CH7_CMD__cmd__restart 3 +#define R_DMA_CH7_CMD__cmd__continue 3 +#define R_DMA_CH7_CMD__cmd__reset 4 + +#define R_DMA_CH7_CLR_INTR (IO_TYPECAST_BYTE 0xb00001ed) +#define R_DMA_CH7_CLR_INTR__clr_eop__BITNR 1 +#define R_DMA_CH7_CLR_INTR__clr_eop__WIDTH 1 +#define R_DMA_CH7_CLR_INTR__clr_eop__do 1 +#define R_DMA_CH7_CLR_INTR__clr_eop__dont 0 +#define R_DMA_CH7_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH7_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH7_CLR_INTR__clr_descr__do 1 +#define R_DMA_CH7_CLR_INTR__clr_descr__dont 0 + +#define R_DMA_CH7_STATUS (IO_TYPECAST_RO_BYTE 0xb00001ee) +#define R_DMA_CH7_STATUS__avail__BITNR 0 +#define R_DMA_CH7_STATUS__avail__WIDTH 7 + +#define R_DMA_CH8_HWSW (IO_TYPECAST_UDWORD 0xb0000180) +#define R_DMA_CH8_HWSW__hw__BITNR 16 +#define R_DMA_CH8_HWSW__hw__WIDTH 16 +#define R_DMA_CH8_HWSW__sw__BITNR 0 +#define R_DMA_CH8_HWSW__sw__WIDTH 16 + +#define R_DMA_CH8_DESCR (IO_TYPECAST_UDWORD 0xb000018c) +#define R_DMA_CH8_DESCR__descr__BITNR 0 +#define R_DMA_CH8_DESCR__descr__WIDTH 32 + +#define R_DMA_CH8_NEXT (IO_TYPECAST_UDWORD 0xb0000184) +#define R_DMA_CH8_NEXT__next__BITNR 0 +#define R_DMA_CH8_NEXT__next__WIDTH 32 + +#define R_DMA_CH8_BUF (IO_TYPECAST_UDWORD 0xb0000188) +#define R_DMA_CH8_BUF__buf__BITNR 0 +#define R_DMA_CH8_BUF__buf__WIDTH 32 + +#define R_DMA_CH8_FIRST (IO_TYPECAST_UDWORD 0xb00001c0) +#define R_DMA_CH8_FIRST__first__BITNR 0 +#define R_DMA_CH8_FIRST__first__WIDTH 32 + +#define R_DMA_CH8_CMD (IO_TYPECAST_BYTE 0xb00001f0) +#define R_DMA_CH8_CMD__cmd__BITNR 0 +#define R_DMA_CH8_CMD__cmd__WIDTH 3 +#define R_DMA_CH8_CMD__cmd__hold 0 +#define R_DMA_CH8_CMD__cmd__start 1 +#define R_DMA_CH8_CMD__cmd__restart 3 +#define R_DMA_CH8_CMD__cmd__continue 3 +#define R_DMA_CH8_CMD__cmd__reset 4 + +#define R_DMA_CH8_CLR_INTR (IO_TYPECAST_BYTE 0xb00001f1) +#define R_DMA_CH8_CLR_INTR__clr_eop__BITNR 1 +#define R_DMA_CH8_CLR_INTR__clr_eop__WIDTH 1 +#define R_DMA_CH8_CLR_INTR__clr_eop__do 1 +#define R_DMA_CH8_CLR_INTR__clr_eop__dont 0 +#define R_DMA_CH8_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH8_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH8_CLR_INTR__clr_descr__do 1 +#define R_DMA_CH8_CLR_INTR__clr_descr__dont 0 + +#define R_DMA_CH8_STATUS (IO_TYPECAST_RO_BYTE 0xb00001f2) +#define R_DMA_CH8_STATUS__avail__BITNR 0 +#define R_DMA_CH8_STATUS__avail__WIDTH 7 + +#define R_DMA_CH8_SUB (IO_TYPECAST_UDWORD 0xb000018c) +#define R_DMA_CH8_SUB__sub__BITNR 0 +#define R_DMA_CH8_SUB__sub__WIDTH 32 + +#define R_DMA_CH8_NEP (IO_TYPECAST_UDWORD 0xb00001c0) +#define R_DMA_CH8_NEP__nep__BITNR 0 +#define R_DMA_CH8_NEP__nep__WIDTH 32 + +#define R_DMA_CH8_SUB0_EP (IO_TYPECAST_UDWORD 0xb00001c8) +#define R_DMA_CH8_SUB0_EP__ep__BITNR 0 +#define R_DMA_CH8_SUB0_EP__ep__WIDTH 32 + +#define R_DMA_CH8_SUB0_CMD (IO_TYPECAST_BYTE 0xb00001d3) +#define R_DMA_CH8_SUB0_CMD__cmd__BITNR 0 +#define R_DMA_CH8_SUB0_CMD__cmd__WIDTH 1 +#define R_DMA_CH8_SUB0_CMD__cmd__stop 0 +#define R_DMA_CH8_SUB0_CMD__cmd__start 1 + +#define R_DMA_CH8_SUB0_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e3) +#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__dont 0 +#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__do 1 + +#define R_DMA_CH8_SUB1_EP (IO_TYPECAST_UDWORD 0xb00001cc) +#define R_DMA_CH8_SUB1_EP__ep__BITNR 0 +#define R_DMA_CH8_SUB1_EP__ep__WIDTH 32 + +#define R_DMA_CH8_SUB1_CMD (IO_TYPECAST_BYTE 0xb00001d7) +#define R_DMA_CH8_SUB1_CMD__cmd__BITNR 0 +#define R_DMA_CH8_SUB1_CMD__cmd__WIDTH 1 +#define R_DMA_CH8_SUB1_CMD__cmd__stop 0 +#define R_DMA_CH8_SUB1_CMD__cmd__start 1 + +#define R_DMA_CH8_SUB1_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e7) +#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__dont 0 +#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__do 1 + +#define R_DMA_CH8_SUB2_EP (IO_TYPECAST_UDWORD 0xb00001f8) +#define R_DMA_CH8_SUB2_EP__ep__BITNR 0 +#define R_DMA_CH8_SUB2_EP__ep__WIDTH 32 + +#define R_DMA_CH8_SUB2_CMD (IO_TYPECAST_BYTE 0xb00001db) +#define R_DMA_CH8_SUB2_CMD__cmd__BITNR 0 +#define R_DMA_CH8_SUB2_CMD__cmd__WIDTH 1 +#define R_DMA_CH8_SUB2_CMD__cmd__stop 0 +#define R_DMA_CH8_SUB2_CMD__cmd__start 1 + +#define R_DMA_CH8_SUB2_CLR_INTR (IO_TYPECAST_BYTE 0xb00001eb) +#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__dont 0 +#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__do 1 + +#define R_DMA_CH8_SUB3_EP (IO_TYPECAST_UDWORD 0xb00001fc) +#define R_DMA_CH8_SUB3_EP__ep__BITNR 0 +#define R_DMA_CH8_SUB3_EP__ep__WIDTH 32 + +#define R_DMA_CH8_SUB3_CMD (IO_TYPECAST_BYTE 0xb00001df) +#define R_DMA_CH8_SUB3_CMD__cmd__BITNR 0 +#define R_DMA_CH8_SUB3_CMD__cmd__WIDTH 1 +#define R_DMA_CH8_SUB3_CMD__cmd__stop 0 +#define R_DMA_CH8_SUB3_CMD__cmd__start 1 + +#define R_DMA_CH8_SUB3_CLR_INTR (IO_TYPECAST_BYTE 0xb00001ef) +#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__dont 0 +#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__do 1 + +#define R_DMA_CH9_HWSW (IO_TYPECAST_UDWORD 0xb0000190) +#define R_DMA_CH9_HWSW__hw__BITNR 16 +#define R_DMA_CH9_HWSW__hw__WIDTH 16 +#define R_DMA_CH9_HWSW__sw__BITNR 0 +#define R_DMA_CH9_HWSW__sw__WIDTH 16 + +#define R_DMA_CH9_DESCR (IO_TYPECAST_UDWORD 0xb000019c) +#define R_DMA_CH9_DESCR__descr__BITNR 0 +#define R_DMA_CH9_DESCR__descr__WIDTH 32 + +#define R_DMA_CH9_NEXT (IO_TYPECAST_UDWORD 0xb0000194) +#define R_DMA_CH9_NEXT__next__BITNR 0 +#define R_DMA_CH9_NEXT__next__WIDTH 32 + +#define R_DMA_CH9_BUF (IO_TYPECAST_UDWORD 0xb0000198) +#define R_DMA_CH9_BUF__buf__BITNR 0 +#define R_DMA_CH9_BUF__buf__WIDTH 32 + +#define R_DMA_CH9_FIRST (IO_TYPECAST_UDWORD 0xb00001c4) +#define R_DMA_CH9_FIRST__first__BITNR 0 +#define R_DMA_CH9_FIRST__first__WIDTH 32 + +#define R_DMA_CH9_CMD (IO_TYPECAST_BYTE 0xb00001f4) +#define R_DMA_CH9_CMD__cmd__BITNR 0 +#define R_DMA_CH9_CMD__cmd__WIDTH 3 +#define R_DMA_CH9_CMD__cmd__hold 0 +#define R_DMA_CH9_CMD__cmd__start 1 +#define R_DMA_CH9_CMD__cmd__restart 3 +#define R_DMA_CH9_CMD__cmd__continue 3 +#define R_DMA_CH9_CMD__cmd__reset 4 + +#define R_DMA_CH9_CLR_INTR (IO_TYPECAST_BYTE 0xb00001f5) +#define R_DMA_CH9_CLR_INTR__clr_eop__BITNR 1 +#define R_DMA_CH9_CLR_INTR__clr_eop__WIDTH 1 +#define R_DMA_CH9_CLR_INTR__clr_eop__do 1 +#define R_DMA_CH9_CLR_INTR__clr_eop__dont 0 +#define R_DMA_CH9_CLR_INTR__clr_descr__BITNR 0 +#define R_DMA_CH9_CLR_INTR__clr_descr__WIDTH 1 +#define R_DMA_CH9_CLR_INTR__clr_descr__do 1 +#define R_DMA_CH9_CLR_INTR__clr_descr__dont 0 + +#define R_DMA_CH9_STATUS (IO_TYPECAST_RO_BYTE 0xb00001f6) +#define R_DMA_CH9_STATUS__avail__BITNR 0 +#define R_DMA_CH9_STATUS__avail__WIDTH 7 + +/* +!* Test mode registers +!*/ + +#define R_TEST_MODE (IO_TYPECAST_UDWORD 0xb00000fc) +#define R_TEST_MODE__single_step__BITNR 19 +#define R_TEST_MODE__single_step__WIDTH 1 +#define R_TEST_MODE__single_step__on 1 +#define R_TEST_MODE__single_step__off 0 +#define R_TEST_MODE__step_wr__BITNR 18 +#define R_TEST_MODE__step_wr__WIDTH 1 +#define R_TEST_MODE__step_wr__on 1 +#define R_TEST_MODE__step_wr__off 0 +#define R_TEST_MODE__step_rd__BITNR 17 +#define R_TEST_MODE__step_rd__WIDTH 1 +#define R_TEST_MODE__step_rd__on 1 +#define R_TEST_MODE__step_rd__off 0 +#define R_TEST_MODE__step_fetch__BITNR 16 +#define R_TEST_MODE__step_fetch__WIDTH 1 +#define R_TEST_MODE__step_fetch__on 1 +#define R_TEST_MODE__step_fetch__off 0 +#define R_TEST_MODE__mmu_test__BITNR 12 +#define R_TEST_MODE__mmu_test__WIDTH 1 +#define R_TEST_MODE__mmu_test__on 1 +#define R_TEST_MODE__mmu_test__off 0 +#define R_TEST_MODE__usb_test__BITNR 11 +#define R_TEST_MODE__usb_test__WIDTH 1 +#define R_TEST_MODE__usb_test__on 1 +#define R_TEST_MODE__usb_test__off 0 +#define R_TEST_MODE__scsi_timer_test__BITNR 10 +#define R_TEST_MODE__scsi_timer_test__WIDTH 1 +#define R_TEST_MODE__scsi_timer_test__on 1 +#define R_TEST_MODE__scsi_timer_test__off 0 +#define R_TEST_MODE__backoff__BITNR 9 +#define R_TEST_MODE__backoff__WIDTH 1 +#define R_TEST_MODE__backoff__on 1 +#define R_TEST_MODE__backoff__off 0 +#define R_TEST_MODE__snmp_test__BITNR 8 +#define R_TEST_MODE__snmp_test__WIDTH 1 +#define R_TEST_MODE__snmp_test__on 1 +#define R_TEST_MODE__snmp_test__off 0 +#define R_TEST_MODE__snmp_inc__BITNR 7 +#define R_TEST_MODE__snmp_inc__WIDTH 1 +#define R_TEST_MODE__snmp_inc__do 1 +#define R_TEST_MODE__snmp_inc__dont 0 +#define R_TEST_MODE__ser_loop__BITNR 6 +#define R_TEST_MODE__ser_loop__WIDTH 1 +#define R_TEST_MODE__ser_loop__on 1 +#define R_TEST_MODE__ser_loop__off 0 +#define R_TEST_MODE__baudrate__BITNR 5 +#define R_TEST_MODE__baudrate__WIDTH 1 +#define R_TEST_MODE__baudrate__on 1 +#define R_TEST_MODE__baudrate__off 0 +#define R_TEST_MODE__timer__BITNR 3 +#define R_TEST_MODE__timer__WIDTH 2 +#define R_TEST_MODE__timer__off 0 +#define R_TEST_MODE__timer__even 1 +#define R_TEST_MODE__timer__odd 2 +#define R_TEST_MODE__timer__all 3 +#define R_TEST_MODE__cache_test__BITNR 2 +#define R_TEST_MODE__cache_test__WIDTH 1 +#define R_TEST_MODE__cache_test__normal 0 +#define R_TEST_MODE__cache_test__test 1 +#define R_TEST_MODE__tag_test__BITNR 1 +#define R_TEST_MODE__tag_test__WIDTH 1 +#define R_TEST_MODE__tag_test__normal 0 +#define R_TEST_MODE__tag_test__test 1 +#define R_TEST_MODE__cache_enable__BITNR 0 +#define R_TEST_MODE__cache_enable__WIDTH 1 +#define R_TEST_MODE__cache_enable__enable 1 +#define R_TEST_MODE__cache_enable__disable 0 + +#define R_SINGLE_STEP (IO_TYPECAST_BYTE 0xb00000fe) +#define R_SINGLE_STEP__single_step__BITNR 3 +#define R_SINGLE_STEP__single_step__WIDTH 1 +#define R_SINGLE_STEP__single_step__on 1 +#define R_SINGLE_STEP__single_step__off 0 +#define R_SINGLE_STEP__step_wr__BITNR 2 +#define R_SINGLE_STEP__step_wr__WIDTH 1 +#define R_SINGLE_STEP__step_wr__on 1 +#define R_SINGLE_STEP__step_wr__off 0 +#define R_SINGLE_STEP__step_rd__BITNR 1 +#define R_SINGLE_STEP__step_rd__WIDTH 1 +#define R_SINGLE_STEP__step_rd__on 1 +#define R_SINGLE_STEP__step_rd__off 0 +#define R_SINGLE_STEP__step_fetch__BITNR 0 +#define R_SINGLE_STEP__step_fetch__WIDTH 1 +#define R_SINGLE_STEP__step_fetch__on 1 +#define R_SINGLE_STEP__step_fetch__off 0 + +/* +!* USB interface control registers +!*/ + +#define R_USB_REVISION (IO_TYPECAST_RO_BYTE 0xb0000200) +#define R_USB_REVISION__major__BITNR 4 +#define R_USB_REVISION__major__WIDTH 4 +#define R_USB_REVISION__minor__BITNR 0 +#define R_USB_REVISION__minor__WIDTH 4 + +#define R_USB_COMMAND (IO_TYPECAST_BYTE 0xb0000201) +#define R_USB_COMMAND__port_sel__BITNR 6 +#define R_USB_COMMAND__port_sel__WIDTH 2 +#define R_USB_COMMAND__port_sel__nop 0 +#define R_USB_COMMAND__port_sel__port1 1 +#define R_USB_COMMAND__port_sel__port2 2 +#define R_USB_COMMAND__port_sel__both 3 +#define R_USB_COMMAND__port_cmd__BITNR 4 +#define R_USB_COMMAND__port_cmd__WIDTH 2 +#define R_USB_COMMAND__port_cmd__reset 0 +#define R_USB_COMMAND__port_cmd__disable 1 +#define R_USB_COMMAND__port_cmd__suspend 2 +#define R_USB_COMMAND__port_cmd__resume 3 +#define R_USB_COMMAND__busy__BITNR 3 +#define R_USB_COMMAND__busy__WIDTH 1 +#define R_USB_COMMAND__busy__no 0 +#define R_USB_COMMAND__busy__yes 1 +#define R_USB_COMMAND__ctrl_cmd__BITNR 0 +#define R_USB_COMMAND__ctrl_cmd__WIDTH 3 +#define R_USB_COMMAND__ctrl_cmd__nop 0 +#define R_USB_COMMAND__ctrl_cmd__reset 1 +#define R_USB_COMMAND__ctrl_cmd__deconfig 2 +#define R_USB_COMMAND__ctrl_cmd__host_config 3 +#define R_USB_COMMAND__ctrl_cmd__dev_config 4 +#define R_USB_COMMAND__ctrl_cmd__host_nop 5 +#define R_USB_COMMAND__ctrl_cmd__host_run 6 +#define R_USB_COMMAND__ctrl_cmd__host_stop 7 + +#define R_USB_COMMAND_DEV (IO_TYPECAST_BYTE 0xb0000201) +#define R_USB_COMMAND_DEV__port_sel__BITNR 6 +#define R_USB_COMMAND_DEV__port_sel__WIDTH 2 +#define R_USB_COMMAND_DEV__port_sel__nop 0 +#define R_USB_COMMAND_DEV__port_sel__dummy1 1 +#define R_USB_COMMAND_DEV__port_sel__dummy2 2 +#define R_USB_COMMAND_DEV__port_sel__any 3 +#define R_USB_COMMAND_DEV__port_cmd__BITNR 4 +#define R_USB_COMMAND_DEV__port_cmd__WIDTH 2 +#define R_USB_COMMAND_DEV__port_cmd__active 0 +#define R_USB_COMMAND_DEV__port_cmd__passive 1 +#define R_USB_COMMAND_DEV__port_cmd__nop 2 +#define R_USB_COMMAND_DEV__port_cmd__wakeup 3 +#define R_USB_COMMAND_DEV__busy__BITNR 3 +#define R_USB_COMMAND_DEV__busy__WIDTH 1 +#define R_USB_COMMAND_DEV__busy__no 0 +#define R_USB_COMMAND_DEV__busy__yes 1 +#define R_USB_COMMAND_DEV__ctrl_cmd__BITNR 0 +#define R_USB_COMMAND_DEV__ctrl_cmd__WIDTH 3 +#define R_USB_COMMAND_DEV__ctrl_cmd__nop 0 +#define R_USB_COMMAND_DEV__ctrl_cmd__reset 1 +#define R_USB_COMMAND_DEV__ctrl_cmd__deconfig 2 +#define R_USB_COMMAND_DEV__ctrl_cmd__host_config 3 +#define R_USB_COMMAND_DEV__ctrl_cmd__dev_config 4 +#define R_USB_COMMAND_DEV__ctrl_cmd__dev_active 5 +#define R_USB_COMMAND_DEV__ctrl_cmd__dev_passive 6 +#define R_USB_COMMAND_DEV__ctrl_cmd__dev_nop 7 + +#define R_USB_STATUS (IO_TYPECAST_RO_BYTE 0xb0000202) +#define R_USB_STATUS__ourun__BITNR 5 +#define R_USB_STATUS__ourun__WIDTH 1 +#define R_USB_STATUS__ourun__no 0 +#define R_USB_STATUS__ourun__yes 1 +#define R_USB_STATUS__perror__BITNR 4 +#define R_USB_STATUS__perror__WIDTH 1 +#define R_USB_STATUS__perror__no 0 +#define R_USB_STATUS__perror__yes 1 +#define R_USB_STATUS__device_mode__BITNR 3 +#define R_USB_STATUS__device_mode__WIDTH 1 +#define R_USB_STATUS__device_mode__no 0 +#define R_USB_STATUS__device_mode__yes 1 +#define R_USB_STATUS__host_mode__BITNR 2 +#define R_USB_STATUS__host_mode__WIDTH 1 +#define R_USB_STATUS__host_mode__no 0 +#define R_USB_STATUS__host_mode__yes 1 +#define R_USB_STATUS__started__BITNR 1 +#define R_USB_STATUS__started__WIDTH 1 +#define R_USB_STATUS__started__no 0 +#define R_USB_STATUS__started__yes 1 +#define R_USB_STATUS__running__BITNR 0 +#define R_USB_STATUS__running__WIDTH 1 +#define R_USB_STATUS__running__no 0 +#define R_USB_STATUS__running__yes 1 + +#define R_USB_IRQ_MASK_SET (IO_TYPECAST_UWORD 0xb0000204) +#define R_USB_IRQ_MASK_SET__iso_eof__BITNR 13 +#define R_USB_IRQ_MASK_SET__iso_eof__WIDTH 1 +#define R_USB_IRQ_MASK_SET__iso_eof__nop 0 +#define R_USB_IRQ_MASK_SET__iso_eof__set 1 +#define R_USB_IRQ_MASK_SET__intr_eof__BITNR 12 +#define R_USB_IRQ_MASK_SET__intr_eof__WIDTH 1 +#define R_USB_IRQ_MASK_SET__intr_eof__nop 0 +#define R_USB_IRQ_MASK_SET__intr_eof__set 1 +#define R_USB_IRQ_MASK_SET__iso_eot__BITNR 11 +#define R_USB_IRQ_MASK_SET__iso_eot__WIDTH 1 +#define R_USB_IRQ_MASK_SET__iso_eot__nop 0 +#define R_USB_IRQ_MASK_SET__iso_eot__set 1 +#define R_USB_IRQ_MASK_SET__intr_eot__BITNR 10 +#define R_USB_IRQ_MASK_SET__intr_eot__WIDTH 1 +#define R_USB_IRQ_MASK_SET__intr_eot__nop 0 +#define R_USB_IRQ_MASK_SET__intr_eot__set 1 +#define R_USB_IRQ_MASK_SET__ctl_eot__BITNR 9 +#define R_USB_IRQ_MASK_SET__ctl_eot__WIDTH 1 +#define R_USB_IRQ_MASK_SET__ctl_eot__nop 0 +#define R_USB_IRQ_MASK_SET__ctl_eot__set 1 +#define R_USB_IRQ_MASK_SET__bulk_eot__BITNR 8 +#define R_USB_IRQ_MASK_SET__bulk_eot__WIDTH 1 +#define R_USB_IRQ_MASK_SET__bulk_eot__nop 0 +#define R_USB_IRQ_MASK_SET__bulk_eot__set 1 +#define R_USB_IRQ_MASK_SET__epid_attn__BITNR 3 +#define R_USB_IRQ_MASK_SET__epid_attn__WIDTH 1 +#define R_USB_IRQ_MASK_SET__epid_attn__nop 0 +#define R_USB_IRQ_MASK_SET__epid_attn__set 1 +#define R_USB_IRQ_MASK_SET__sof__BITNR 2 +#define R_USB_IRQ_MASK_SET__sof__WIDTH 1 +#define R_USB_IRQ_MASK_SET__sof__nop 0 +#define R_USB_IRQ_MASK_SET__sof__set 1 +#define R_USB_IRQ_MASK_SET__port_status__BITNR 1 +#define R_USB_IRQ_MASK_SET__port_status__WIDTH 1 +#define R_USB_IRQ_MASK_SET__port_status__nop 0 +#define R_USB_IRQ_MASK_SET__port_status__set 1 +#define R_USB_IRQ_MASK_SET__ctl_status__BITNR 0 +#define R_USB_IRQ_MASK_SET__ctl_status__WIDTH 1 +#define R_USB_IRQ_MASK_SET__ctl_status__nop 0 +#define R_USB_IRQ_MASK_SET__ctl_status__set 1 + +#define R_USB_IRQ_MASK_READ (IO_TYPECAST_RO_UWORD 0xb0000204) +#define R_USB_IRQ_MASK_READ__iso_eof__BITNR 13 +#define R_USB_IRQ_MASK_READ__iso_eof__WIDTH 1 +#define R_USB_IRQ_MASK_READ__iso_eof__no_pend 0 +#define R_USB_IRQ_MASK_READ__iso_eof__pend 1 +#define R_USB_IRQ_MASK_READ__intr_eof__BITNR 12 +#define R_USB_IRQ_MASK_READ__intr_eof__WIDTH 1 +#define R_USB_IRQ_MASK_READ__intr_eof__no_pend 0 +#define R_USB_IRQ_MASK_READ__intr_eof__pend 1 +#define R_USB_IRQ_MASK_READ__iso_eot__BITNR 11 +#define R_USB_IRQ_MASK_READ__iso_eot__WIDTH 1 +#define R_USB_IRQ_MASK_READ__iso_eot__no_pend 0 +#define R_USB_IRQ_MASK_READ__iso_eot__pend 1 +#define R_USB_IRQ_MASK_READ__intr_eot__BITNR 10 +#define R_USB_IRQ_MASK_READ__intr_eot__WIDTH 1 +#define R_USB_IRQ_MASK_READ__intr_eot__no_pend 0 +#define R_USB_IRQ_MASK_READ__intr_eot__pend 1 +#define R_USB_IRQ_MASK_READ__ctl_eot__BITNR 9 +#define R_USB_IRQ_MASK_READ__ctl_eot__WIDTH 1 +#define R_USB_IRQ_MASK_READ__ctl_eot__no_pend 0 +#define R_USB_IRQ_MASK_READ__ctl_eot__pend 1 +#define R_USB_IRQ_MASK_READ__bulk_eot__BITNR 8 +#define R_USB_IRQ_MASK_READ__bulk_eot__WIDTH 1 +#define R_USB_IRQ_MASK_READ__bulk_eot__no_pend 0 +#define R_USB_IRQ_MASK_READ__bulk_eot__pend 1 +#define R_USB_IRQ_MASK_READ__epid_attn__BITNR 3 +#define R_USB_IRQ_MASK_READ__epid_attn__WIDTH 1 +#define R_USB_IRQ_MASK_READ__epid_attn__no_pend 0 +#define R_USB_IRQ_MASK_READ__epid_attn__pend 1 +#define R_USB_IRQ_MASK_READ__sof__BITNR 2 +#define R_USB_IRQ_MASK_READ__sof__WIDTH 1 +#define R_USB_IRQ_MASK_READ__sof__no_pend 0 +#define R_USB_IRQ_MASK_READ__sof__pend 1 +#define R_USB_IRQ_MASK_READ__port_status__BITNR 1 +#define R_USB_IRQ_MASK_READ__port_status__WIDTH 1 +#define R_USB_IRQ_MASK_READ__port_status__no_pend 0 +#define R_USB_IRQ_MASK_READ__port_status__pend 1 +#define R_USB_IRQ_MASK_READ__ctl_status__BITNR 0 +#define R_USB_IRQ_MASK_READ__ctl_status__WIDTH 1 +#define R_USB_IRQ_MASK_READ__ctl_status__no_pend 0 +#define R_USB_IRQ_MASK_READ__ctl_status__pend 1 + +#define R_USB_IRQ_MASK_CLR (IO_TYPECAST_UWORD 0xb0000206) +#define R_USB_IRQ_MASK_CLR__iso_eof__BITNR 13 +#define R_USB_IRQ_MASK_CLR__iso_eof__WIDTH 1 +#define R_USB_IRQ_MASK_CLR__iso_eof__nop 0 +#define R_USB_IRQ_MASK_CLR__iso_eof__clr 1 +#define R_USB_IRQ_MASK_CLR__intr_eof__BITNR 12 +#define R_USB_IRQ_MASK_CLR__intr_eof__WIDTH 1 +#define R_USB_IRQ_MASK_CLR__intr_eof__nop 0 +#define R_USB_IRQ_MASK_CLR__intr_eof__clr 1 +#define R_USB_IRQ_MASK_CLR__iso_eot__BITNR 11 +#define R_USB_IRQ_MASK_CLR__iso_eot__WIDTH 1 +#define R_USB_IRQ_MASK_CLR__iso_eot__nop 0 +#define R_USB_IRQ_MASK_CLR__iso_eot__clr 1 +#define R_USB_IRQ_MASK_CLR__intr_eot__BITNR 10 +#define R_USB_IRQ_MASK_CLR__intr_eot__WIDTH 1 +#define R_USB_IRQ_MASK_CLR__intr_eot__nop 0 +#define R_USB_IRQ_MASK_CLR__intr_eot__clr 1 +#define R_USB_IRQ_MASK_CLR__ctl_eot__BITNR 9 +#define R_USB_IRQ_MASK_CLR__ctl_eot__WIDTH 1 +#define R_USB_IRQ_MASK_CLR__ctl_eot__nop 0 +#define R_USB_IRQ_MASK_CLR__ctl_eot__clr 1 +#define R_USB_IRQ_MASK_CLR__bulk_eot__BITNR 8 +#define R_USB_IRQ_MASK_CLR__bulk_eot__WIDTH 1 +#define R_USB_IRQ_MASK_CLR__bulk_eot__nop 0 +#define R_USB_IRQ_MASK_CLR__bulk_eot__clr 1 +#define R_USB_IRQ_MASK_CLR__epid_attn__BITNR 3 +#define R_USB_IRQ_MASK_CLR__epid_attn__WIDTH 1 +#define R_USB_IRQ_MASK_CLR__epid_attn__nop 0 +#define R_USB_IRQ_MASK_CLR__epid_attn__clr 1 +#define R_USB_IRQ_MASK_CLR__sof__BITNR 2 +#define R_USB_IRQ_MASK_CLR__sof__WIDTH 1 +#define R_USB_IRQ_MASK_CLR__sof__nop 0 +#define R_USB_IRQ_MASK_CLR__sof__clr 1 +#define R_USB_IRQ_MASK_CLR__port_status__BITNR 1 +#define R_USB_IRQ_MASK_CLR__port_status__WIDTH 1 +#define R_USB_IRQ_MASK_CLR__port_status__nop 0 +#define R_USB_IRQ_MASK_CLR__port_status__clr 1 +#define R_USB_IRQ_MASK_CLR__ctl_status__BITNR 0 +#define R_USB_IRQ_MASK_CLR__ctl_status__WIDTH 1 +#define R_USB_IRQ_MASK_CLR__ctl_status__nop 0 +#define R_USB_IRQ_MASK_CLR__ctl_status__clr 1 + +#define R_USB_IRQ_READ (IO_TYPECAST_RO_UWORD 0xb0000206) +#define R_USB_IRQ_READ__iso_eof__BITNR 13 +#define R_USB_IRQ_READ__iso_eof__WIDTH 1 +#define R_USB_IRQ_READ__iso_eof__no_pend 0 +#define R_USB_IRQ_READ__iso_eof__pend 1 +#define R_USB_IRQ_READ__intr_eof__BITNR 12 +#define R_USB_IRQ_READ__intr_eof__WIDTH 1 +#define R_USB_IRQ_READ__intr_eof__no_pend 0 +#define R_USB_IRQ_READ__intr_eof__pend 1 +#define R_USB_IRQ_READ__iso_eot__BITNR 11 +#define R_USB_IRQ_READ__iso_eot__WIDTH 1 +#define R_USB_IRQ_READ__iso_eot__no_pend 0 +#define R_USB_IRQ_READ__iso_eot__pend 1 +#define R_USB_IRQ_READ__intr_eot__BITNR 10 +#define R_USB_IRQ_READ__intr_eot__WIDTH 1 +#define R_USB_IRQ_READ__intr_eot__no_pend 0 +#define R_USB_IRQ_READ__intr_eot__pend 1 +#define R_USB_IRQ_READ__ctl_eot__BITNR 9 +#define R_USB_IRQ_READ__ctl_eot__WIDTH 1 +#define R_USB_IRQ_READ__ctl_eot__no_pend 0 +#define R_USB_IRQ_READ__ctl_eot__pend 1 +#define R_USB_IRQ_READ__bulk_eot__BITNR 8 +#define R_USB_IRQ_READ__bulk_eot__WIDTH 1 +#define R_USB_IRQ_READ__bulk_eot__no_pend 0 +#define R_USB_IRQ_READ__bulk_eot__pend 1 +#define R_USB_IRQ_READ__epid_attn__BITNR 3 +#define R_USB_IRQ_READ__epid_attn__WIDTH 1 +#define R_USB_IRQ_READ__epid_attn__no_pend 0 +#define R_USB_IRQ_READ__epid_attn__pend 1 +#define R_USB_IRQ_READ__sof__BITNR 2 +#define R_USB_IRQ_READ__sof__WIDTH 1 +#define R_USB_IRQ_READ__sof__no_pend 0 +#define R_USB_IRQ_READ__sof__pend 1 +#define R_USB_IRQ_READ__port_status__BITNR 1 +#define R_USB_IRQ_READ__port_status__WIDTH 1 +#define R_USB_IRQ_READ__port_status__no_pend 0 +#define R_USB_IRQ_READ__port_status__pend 1 +#define R_USB_IRQ_READ__ctl_status__BITNR 0 +#define R_USB_IRQ_READ__ctl_status__WIDTH 1 +#define R_USB_IRQ_READ__ctl_status__no_pend 0 +#define R_USB_IRQ_READ__ctl_status__pend 1 + +#define R_USB_IRQ_MASK_SET_DEV (IO_TYPECAST_UWORD 0xb0000204) +#define R_USB_IRQ_MASK_SET_DEV__out_eot__BITNR 12 +#define R_USB_IRQ_MASK_SET_DEV__out_eot__WIDTH 1 +#define R_USB_IRQ_MASK_SET_DEV__out_eot__nop 0 +#define R_USB_IRQ_MASK_SET_DEV__out_eot__set 1 +#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__BITNR 11 +#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__nop 0 +#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__set 1 +#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__BITNR 10 +#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__nop 0 +#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__set 1 +#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__BITNR 9 +#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__nop 0 +#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__set 1 +#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__BITNR 8 +#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__nop 0 +#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__set 1 +#define R_USB_IRQ_MASK_SET_DEV__epid_attn__BITNR 3 +#define R_USB_IRQ_MASK_SET_DEV__epid_attn__WIDTH 1 +#define R_USB_IRQ_MASK_SET_DEV__epid_attn__nop 0 +#define R_USB_IRQ_MASK_SET_DEV__epid_attn__set 1 +#define R_USB_IRQ_MASK_SET_DEV__sof__BITNR 2 +#define R_USB_IRQ_MASK_SET_DEV__sof__WIDTH 1 +#define R_USB_IRQ_MASK_SET_DEV__sof__nop 0 +#define R_USB_IRQ_MASK_SET_DEV__sof__set 1 +#define R_USB_IRQ_MASK_SET_DEV__port_status__BITNR 1 +#define R_USB_IRQ_MASK_SET_DEV__port_status__WIDTH 1 +#define R_USB_IRQ_MASK_SET_DEV__port_status__nop 0 +#define R_USB_IRQ_MASK_SET_DEV__port_status__set 1 +#define R_USB_IRQ_MASK_SET_DEV__ctl_status__BITNR 0 +#define R_USB_IRQ_MASK_SET_DEV__ctl_status__WIDTH 1 +#define R_USB_IRQ_MASK_SET_DEV__ctl_status__nop 0 +#define R_USB_IRQ_MASK_SET_DEV__ctl_status__set 1 + +#define R_USB_IRQ_MASK_READ_DEV (IO_TYPECAST_RO_UWORD 0xb0000204) +#define R_USB_IRQ_MASK_READ_DEV__out_eot__BITNR 12 +#define R_USB_IRQ_MASK_READ_DEV__out_eot__WIDTH 1 +#define R_USB_IRQ_MASK_READ_DEV__out_eot__no_pend 0 +#define R_USB_IRQ_MASK_READ_DEV__out_eot__pend 1 +#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__BITNR 11 +#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__no_pend 0 +#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__pend 1 +#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__BITNR 10 +#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__no_pend 0 +#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__pend 1 +#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__BITNR 9 +#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__no_pend 0 +#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__pend 1 +#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__BITNR 8 +#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__no_pend 0 +#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__pend 1 +#define R_USB_IRQ_MASK_READ_DEV__epid_attn__BITNR 3 +#define R_USB_IRQ_MASK_READ_DEV__epid_attn__WIDTH 1 +#define R_USB_IRQ_MASK_READ_DEV__epid_attn__no_pend 0 +#define R_USB_IRQ_MASK_READ_DEV__epid_attn__pend 1 +#define R_USB_IRQ_MASK_READ_DEV__sof__BITNR 2 +#define R_USB_IRQ_MASK_READ_DEV__sof__WIDTH 1 +#define R_USB_IRQ_MASK_READ_DEV__sof__no_pend 0 +#define R_USB_IRQ_MASK_READ_DEV__sof__pend 1 +#define R_USB_IRQ_MASK_READ_DEV__port_status__BITNR 1 +#define R_USB_IRQ_MASK_READ_DEV__port_status__WIDTH 1 +#define R_USB_IRQ_MASK_READ_DEV__port_status__no_pend 0 +#define R_USB_IRQ_MASK_READ_DEV__port_status__pend 1 +#define R_USB_IRQ_MASK_READ_DEV__ctl_status__BITNR 0 +#define R_USB_IRQ_MASK_READ_DEV__ctl_status__WIDTH 1 +#define R_USB_IRQ_MASK_READ_DEV__ctl_status__no_pend 0 +#define R_USB_IRQ_MASK_READ_DEV__ctl_status__pend 1 + +#define R_USB_IRQ_MASK_CLR_DEV (IO_TYPECAST_UWORD 0xb0000206) +#define R_USB_IRQ_MASK_CLR_DEV__out_eot__BITNR 12 +#define R_USB_IRQ_MASK_CLR_DEV__out_eot__WIDTH 1 +#define R_USB_IRQ_MASK_CLR_DEV__out_eot__nop 0 +#define R_USB_IRQ_MASK_CLR_DEV__out_eot__clr 1 +#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__BITNR 11 +#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__nop 0 +#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__clr 1 +#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__BITNR 10 +#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__nop 0 +#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__clr 1 +#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__BITNR 9 +#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__nop 0 +#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__clr 1 +#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__BITNR 8 +#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__WIDTH 1 +#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__nop 0 +#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__clr 1 +#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__BITNR 3 +#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__WIDTH 1 +#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__nop 0 +#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__clr 1 +#define R_USB_IRQ_MASK_CLR_DEV__sof__BITNR 2 +#define R_USB_IRQ_MASK_CLR_DEV__sof__WIDTH 1 +#define R_USB_IRQ_MASK_CLR_DEV__sof__nop 0 +#define R_USB_IRQ_MASK_CLR_DEV__sof__clr 1 +#define R_USB_IRQ_MASK_CLR_DEV__port_status__BITNR 1 +#define R_USB_IRQ_MASK_CLR_DEV__port_status__WIDTH 1 +#define R_USB_IRQ_MASK_CLR_DEV__port_status__nop 0 +#define R_USB_IRQ_MASK_CLR_DEV__port_status__clr 1 +#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__BITNR 0 +#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__WIDTH 1 +#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__nop 0 +#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__clr 1 + +#define R_USB_IRQ_READ_DEV (IO_TYPECAST_RO_UWORD 0xb0000206) +#define R_USB_IRQ_READ_DEV__out_eot__BITNR 12 +#define R_USB_IRQ_READ_DEV__out_eot__WIDTH 1 +#define R_USB_IRQ_READ_DEV__out_eot__no_pend 0 +#define R_USB_IRQ_READ_DEV__out_eot__pend 1 +#define R_USB_IRQ_READ_DEV__ep3_in_eot__BITNR 11 +#define R_USB_IRQ_READ_DEV__ep3_in_eot__WIDTH 1 +#define R_USB_IRQ_READ_DEV__ep3_in_eot__no_pend 0 +#define R_USB_IRQ_READ_DEV__ep3_in_eot__pend 1 +#define R_USB_IRQ_READ_DEV__ep2_in_eot__BITNR 10 +#define R_USB_IRQ_READ_DEV__ep2_in_eot__WIDTH 1 +#define R_USB_IRQ_READ_DEV__ep2_in_eot__no_pend 0 +#define R_USB_IRQ_READ_DEV__ep2_in_eot__pend 1 +#define R_USB_IRQ_READ_DEV__ep1_in_eot__BITNR 9 +#define R_USB_IRQ_READ_DEV__ep1_in_eot__WIDTH 1 +#define R_USB_IRQ_READ_DEV__ep1_in_eot__no_pend 0 +#define R_USB_IRQ_READ_DEV__ep1_in_eot__pend 1 +#define R_USB_IRQ_READ_DEV__ep0_in_eot__BITNR 8 +#define R_USB_IRQ_READ_DEV__ep0_in_eot__WIDTH 1 +#define R_USB_IRQ_READ_DEV__ep0_in_eot__no_pend 0 +#define R_USB_IRQ_READ_DEV__ep0_in_eot__pend 1 +#define R_USB_IRQ_READ_DEV__epid_attn__BITNR 3 +#define R_USB_IRQ_READ_DEV__epid_attn__WIDTH 1 +#define R_USB_IRQ_READ_DEV__epid_attn__no_pend 0 +#define R_USB_IRQ_READ_DEV__epid_attn__pend 1 +#define R_USB_IRQ_READ_DEV__sof__BITNR 2 +#define R_USB_IRQ_READ_DEV__sof__WIDTH 1 +#define R_USB_IRQ_READ_DEV__sof__no_pend 0 +#define R_USB_IRQ_READ_DEV__sof__pend 1 +#define R_USB_IRQ_READ_DEV__port_status__BITNR 1 +#define R_USB_IRQ_READ_DEV__port_status__WIDTH 1 +#define R_USB_IRQ_READ_DEV__port_status__no_pend 0 +#define R_USB_IRQ_READ_DEV__port_status__pend 1 +#define R_USB_IRQ_READ_DEV__ctl_status__BITNR 0 +#define R_USB_IRQ_READ_DEV__ctl_status__WIDTH 1 +#define R_USB_IRQ_READ_DEV__ctl_status__no_pend 0 +#define R_USB_IRQ_READ_DEV__ctl_status__pend 1 + +#define R_USB_FM_NUMBER (IO_TYPECAST_UDWORD 0xb000020c) +#define R_USB_FM_NUMBER__value__BITNR 0 +#define R_USB_FM_NUMBER__value__WIDTH 32 + +#define R_USB_FM_INTERVAL (IO_TYPECAST_UWORD 0xb0000210) +#define R_USB_FM_INTERVAL__fixed__BITNR 6 +#define R_USB_FM_INTERVAL__fixed__WIDTH 8 +#define R_USB_FM_INTERVAL__adj__BITNR 0 +#define R_USB_FM_INTERVAL__adj__WIDTH 6 + +#define R_USB_FM_REMAINING (IO_TYPECAST_RO_UWORD 0xb0000212) +#define R_USB_FM_REMAINING__value__BITNR 0 +#define R_USB_FM_REMAINING__value__WIDTH 14 + +#define R_USB_FM_PSTART (IO_TYPECAST_UWORD 0xb0000214) +#define R_USB_FM_PSTART__value__BITNR 0 +#define R_USB_FM_PSTART__value__WIDTH 14 + +#define R_USB_RH_STATUS (IO_TYPECAST_RO_BYTE 0xb0000203) +#define R_USB_RH_STATUS__babble2__BITNR 7 +#define R_USB_RH_STATUS__babble2__WIDTH 1 +#define R_USB_RH_STATUS__babble2__no 0 +#define R_USB_RH_STATUS__babble2__yes 1 +#define R_USB_RH_STATUS__babble1__BITNR 6 +#define R_USB_RH_STATUS__babble1__WIDTH 1 +#define R_USB_RH_STATUS__babble1__no 0 +#define R_USB_RH_STATUS__babble1__yes 1 +#define R_USB_RH_STATUS__bus1__BITNR 4 +#define R_USB_RH_STATUS__bus1__WIDTH 2 +#define R_USB_RH_STATUS__bus1__SE0 0 +#define R_USB_RH_STATUS__bus1__Diff0 1 +#define R_USB_RH_STATUS__bus1__Diff1 2 +#define R_USB_RH_STATUS__bus1__SE1 3 +#define R_USB_RH_STATUS__bus2__BITNR 2 +#define R_USB_RH_STATUS__bus2__WIDTH 2 +#define R_USB_RH_STATUS__bus2__SE0 0 +#define R_USB_RH_STATUS__bus2__Diff0 1 +#define R_USB_RH_STATUS__bus2__Diff1 2 +#define R_USB_RH_STATUS__bus2__SE1 3 +#define R_USB_RH_STATUS__nports__BITNR 0 +#define R_USB_RH_STATUS__nports__WIDTH 2 + +#define R_USB_RH_PORT_STATUS_1 (IO_TYPECAST_RO_UWORD 0xb0000218) +#define R_USB_RH_PORT_STATUS_1__speed__BITNR 9 +#define R_USB_RH_PORT_STATUS_1__speed__WIDTH 1 +#define R_USB_RH_PORT_STATUS_1__speed__full 0 +#define R_USB_RH_PORT_STATUS_1__speed__low 1 +#define R_USB_RH_PORT_STATUS_1__power__BITNR 8 +#define R_USB_RH_PORT_STATUS_1__power__WIDTH 1 +#define R_USB_RH_PORT_STATUS_1__reset__BITNR 4 +#define R_USB_RH_PORT_STATUS_1__reset__WIDTH 1 +#define R_USB_RH_PORT_STATUS_1__reset__no 0 +#define R_USB_RH_PORT_STATUS_1__reset__yes 1 +#define R_USB_RH_PORT_STATUS_1__overcurrent__BITNR 3 +#define R_USB_RH_PORT_STATUS_1__overcurrent__WIDTH 1 +#define R_USB_RH_PORT_STATUS_1__overcurrent__no 0 +#define R_USB_RH_PORT_STATUS_1__overcurrent__yes 1 +#define R_USB_RH_PORT_STATUS_1__suspended__BITNR 2 +#define R_USB_RH_PORT_STATUS_1__suspended__WIDTH 1 +#define R_USB_RH_PORT_STATUS_1__suspended__no 0 +#define R_USB_RH_PORT_STATUS_1__suspended__yes 1 +#define R_USB_RH_PORT_STATUS_1__enabled__BITNR 1 +#define R_USB_RH_PORT_STATUS_1__enabled__WIDTH 1 +#define R_USB_RH_PORT_STATUS_1__enabled__no 0 +#define R_USB_RH_PORT_STATUS_1__enabled__yes 1 +#define R_USB_RH_PORT_STATUS_1__connected__BITNR 0 +#define R_USB_RH_PORT_STATUS_1__connected__WIDTH 1 +#define R_USB_RH_PORT_STATUS_1__connected__no 0 +#define R_USB_RH_PORT_STATUS_1__connected__yes 1 + +#define R_USB_RH_PORT_STATUS_2 (IO_TYPECAST_RO_UWORD 0xb000021a) +#define R_USB_RH_PORT_STATUS_2__speed__BITNR 9 +#define R_USB_RH_PORT_STATUS_2__speed__WIDTH 1 +#define R_USB_RH_PORT_STATUS_2__speed__full 0 +#define R_USB_RH_PORT_STATUS_2__speed__low 1 +#define R_USB_RH_PORT_STATUS_2__power__BITNR 8 +#define R_USB_RH_PORT_STATUS_2__power__WIDTH 1 +#define R_USB_RH_PORT_STATUS_2__reset__BITNR 4 +#define R_USB_RH_PORT_STATUS_2__reset__WIDTH 1 +#define R_USB_RH_PORT_STATUS_2__reset__no 0 +#define R_USB_RH_PORT_STATUS_2__reset__yes 1 +#define R_USB_RH_PORT_STATUS_2__overcurrent__BITNR 3 +#define R_USB_RH_PORT_STATUS_2__overcurrent__WIDTH 1 +#define R_USB_RH_PORT_STATUS_2__overcurrent__no 0 +#define R_USB_RH_PORT_STATUS_2__overcurrent__yes 1 +#define R_USB_RH_PORT_STATUS_2__suspended__BITNR 2 +#define R_USB_RH_PORT_STATUS_2__suspended__WIDTH 1 +#define R_USB_RH_PORT_STATUS_2__suspended__no 0 +#define R_USB_RH_PORT_STATUS_2__suspended__yes 1 +#define R_USB_RH_PORT_STATUS_2__enabled__BITNR 1 +#define R_USB_RH_PORT_STATUS_2__enabled__WIDTH 1 +#define R_USB_RH_PORT_STATUS_2__enabled__no 0 +#define R_USB_RH_PORT_STATUS_2__enabled__yes 1 +#define R_USB_RH_PORT_STATUS_2__connected__BITNR 0 +#define R_USB_RH_PORT_STATUS_2__connected__WIDTH 1 +#define R_USB_RH_PORT_STATUS_2__connected__no 0 +#define R_USB_RH_PORT_STATUS_2__connected__yes 1 + +#define R_USB_EPT_INDEX (IO_TYPECAST_BYTE 0xb0000208) +#define R_USB_EPT_INDEX__value__BITNR 0 +#define R_USB_EPT_INDEX__value__WIDTH 5 + +#define R_USB_EPT_DATA (IO_TYPECAST_UDWORD 0xb000021c) +#define R_USB_EPT_DATA__valid__BITNR 31 +#define R_USB_EPT_DATA__valid__WIDTH 1 +#define R_USB_EPT_DATA__valid__no 0 +#define R_USB_EPT_DATA__valid__yes 1 +#define R_USB_EPT_DATA__hold__BITNR 30 +#define R_USB_EPT_DATA__hold__WIDTH 1 +#define R_USB_EPT_DATA__hold__no 0 +#define R_USB_EPT_DATA__hold__yes 1 +#define R_USB_EPT_DATA__error_count_in__BITNR 28 +#define R_USB_EPT_DATA__error_count_in__WIDTH 2 +#define R_USB_EPT_DATA__t_in__BITNR 27 +#define R_USB_EPT_DATA__t_in__WIDTH 1 +#define R_USB_EPT_DATA__low_speed__BITNR 26 +#define R_USB_EPT_DATA__low_speed__WIDTH 1 +#define R_USB_EPT_DATA__low_speed__no 0 +#define R_USB_EPT_DATA__low_speed__yes 1 +#define R_USB_EPT_DATA__port__BITNR 24 +#define R_USB_EPT_DATA__port__WIDTH 2 +#define R_USB_EPT_DATA__port__any 0 +#define R_USB_EPT_DATA__port__p1 1 +#define R_USB_EPT_DATA__port__p2 2 +#define R_USB_EPT_DATA__port__undef 3 +#define R_USB_EPT_DATA__error_code__BITNR 22 +#define R_USB_EPT_DATA__error_code__WIDTH 2 +#define R_USB_EPT_DATA__error_code__no_error 0 +#define R_USB_EPT_DATA__error_code__stall 1 +#define R_USB_EPT_DATA__error_code__bus_error 2 +#define R_USB_EPT_DATA__error_code__buffer_error 3 +#define R_USB_EPT_DATA__t_out__BITNR 21 +#define R_USB_EPT_DATA__t_out__WIDTH 1 +#define R_USB_EPT_DATA__error_count_out__BITNR 19 +#define R_USB_EPT_DATA__error_count_out__WIDTH 2 +#define R_USB_EPT_DATA__max_len__BITNR 11 +#define R_USB_EPT_DATA__max_len__WIDTH 7 +#define R_USB_EPT_DATA__ep__BITNR 7 +#define R_USB_EPT_DATA__ep__WIDTH 4 +#define R_USB_EPT_DATA__dev__BITNR 0 +#define R_USB_EPT_DATA__dev__WIDTH 7 + +#define R_USB_EPT_DATA_ISO (IO_TYPECAST_UDWORD 0xb000021c) +#define R_USB_EPT_DATA_ISO__valid__BITNR 31 +#define R_USB_EPT_DATA_ISO__valid__WIDTH 1 +#define R_USB_EPT_DATA_ISO__valid__no 0 +#define R_USB_EPT_DATA_ISO__valid__yes 1 +#define R_USB_EPT_DATA_ISO__port__BITNR 24 +#define R_USB_EPT_DATA_ISO__port__WIDTH 2 +#define R_USB_EPT_DATA_ISO__port__any 0 +#define R_USB_EPT_DATA_ISO__port__p1 1 +#define R_USB_EPT_DATA_ISO__port__p2 2 +#define R_USB_EPT_DATA_ISO__port__undef 3 +#define R_USB_EPT_DATA_ISO__error_code__BITNR 22 +#define R_USB_EPT_DATA_ISO__error_code__WIDTH 2 +#define R_USB_EPT_DATA_ISO__error_code__no_error 0 +#define R_USB_EPT_DATA_ISO__error_code__stall 1 +#define R_USB_EPT_DATA_ISO__error_code__bus_error 2 +#define R_USB_EPT_DATA_ISO__error_code__TBD3 3 +#define R_USB_EPT_DATA_ISO__max_len__BITNR 11 +#define R_USB_EPT_DATA_ISO__max_len__WIDTH 10 +#define R_USB_EPT_DATA_ISO__ep__BITNR 7 +#define R_USB_EPT_DATA_ISO__ep__WIDTH 4 +#define R_USB_EPT_DATA_ISO__dev__BITNR 0 +#define R_USB_EPT_DATA_ISO__dev__WIDTH 7 + +#define R_USB_EPT_DATA_DEV (IO_TYPECAST_UDWORD 0xb000021c) +#define R_USB_EPT_DATA_DEV__valid__BITNR 31 +#define R_USB_EPT_DATA_DEV__valid__WIDTH 1 +#define R_USB_EPT_DATA_DEV__valid__no 0 +#define R_USB_EPT_DATA_DEV__valid__yes 1 +#define R_USB_EPT_DATA_DEV__hold__BITNR 30 +#define R_USB_EPT_DATA_DEV__hold__WIDTH 1 +#define R_USB_EPT_DATA_DEV__hold__no 0 +#define R_USB_EPT_DATA_DEV__hold__yes 1 +#define R_USB_EPT_DATA_DEV__stall__BITNR 29 +#define R_USB_EPT_DATA_DEV__stall__WIDTH 1 +#define R_USB_EPT_DATA_DEV__stall__no 0 +#define R_USB_EPT_DATA_DEV__stall__yes 1 +#define R_USB_EPT_DATA_DEV__iso_resp__BITNR 28 +#define R_USB_EPT_DATA_DEV__iso_resp__WIDTH 1 +#define R_USB_EPT_DATA_DEV__iso_resp__quiet 0 +#define R_USB_EPT_DATA_DEV__iso_resp__yes 1 +#define R_USB_EPT_DATA_DEV__ctrl__BITNR 27 +#define R_USB_EPT_DATA_DEV__ctrl__WIDTH 1 +#define R_USB_EPT_DATA_DEV__ctrl__no 0 +#define R_USB_EPT_DATA_DEV__ctrl__yes 1 +#define R_USB_EPT_DATA_DEV__iso__BITNR 26 +#define R_USB_EPT_DATA_DEV__iso__WIDTH 1 +#define R_USB_EPT_DATA_DEV__iso__no 0 +#define R_USB_EPT_DATA_DEV__iso__yes 1 +#define R_USB_EPT_DATA_DEV__port__BITNR 24 +#define R_USB_EPT_DATA_DEV__port__WIDTH 2 +#define R_USB_EPT_DATA_DEV__control_phase__BITNR 22 +#define R_USB_EPT_DATA_DEV__control_phase__WIDTH 1 +#define R_USB_EPT_DATA_DEV__t__BITNR 21 +#define R_USB_EPT_DATA_DEV__t__WIDTH 1 +#define R_USB_EPT_DATA_DEV__max_len__BITNR 11 +#define R_USB_EPT_DATA_DEV__max_len__WIDTH 10 +#define R_USB_EPT_DATA_DEV__ep__BITNR 7 +#define R_USB_EPT_DATA_DEV__ep__WIDTH 4 +#define R_USB_EPT_DATA_DEV__dev__BITNR 0 +#define R_USB_EPT_DATA_DEV__dev__WIDTH 7 + +#define R_USB_SNMP_TERROR (IO_TYPECAST_UDWORD 0xb0000220) +#define R_USB_SNMP_TERROR__value__BITNR 0 +#define R_USB_SNMP_TERROR__value__WIDTH 32 + +#define R_USB_EPID_ATTN (IO_TYPECAST_RO_UDWORD 0xb0000224) +#define R_USB_EPID_ATTN__value__BITNR 0 +#define R_USB_EPID_ATTN__value__WIDTH 32 + +#define R_USB_PORT1_DISABLE (IO_TYPECAST_BYTE 0xb000006a) +#define R_USB_PORT1_DISABLE__disable__BITNR 0 +#define R_USB_PORT1_DISABLE__disable__WIDTH 1 +#define R_USB_PORT1_DISABLE__disable__yes 0 +#define R_USB_PORT1_DISABLE__disable__no 1 + +#define R_USB_PORT2_DISABLE (IO_TYPECAST_BYTE 0xb0000052) +#define R_USB_PORT2_DISABLE__disable__BITNR 0 +#define R_USB_PORT2_DISABLE__disable__WIDTH 1 +#define R_USB_PORT2_DISABLE__disable__yes 0 +#define R_USB_PORT2_DISABLE__disable__no 1 + +/* +!* MMU registers +!*/ + +#define R_MMU_CONFIG (IO_TYPECAST_UDWORD 0xb0000240) +#define R_MMU_CONFIG__mmu_enable__BITNR 31 +#define R_MMU_CONFIG__mmu_enable__WIDTH 1 +#define R_MMU_CONFIG__mmu_enable__enable 1 +#define R_MMU_CONFIG__mmu_enable__disable 0 +#define R_MMU_CONFIG__inv_excp__BITNR 18 +#define R_MMU_CONFIG__inv_excp__WIDTH 1 +#define R_MMU_CONFIG__inv_excp__enable 1 +#define R_MMU_CONFIG__inv_excp__disable 0 +#define R_MMU_CONFIG__acc_excp__BITNR 17 +#define R_MMU_CONFIG__acc_excp__WIDTH 1 +#define R_MMU_CONFIG__acc_excp__enable 1 +#define R_MMU_CONFIG__acc_excp__disable 0 +#define R_MMU_CONFIG__we_excp__BITNR 16 +#define R_MMU_CONFIG__we_excp__WIDTH 1 +#define R_MMU_CONFIG__we_excp__enable 1 +#define R_MMU_CONFIG__we_excp__disable 0 +#define R_MMU_CONFIG__seg_f__BITNR 15 +#define R_MMU_CONFIG__seg_f__WIDTH 1 +#define R_MMU_CONFIG__seg_f__seg 1 +#define R_MMU_CONFIG__seg_f__page 0 +#define R_MMU_CONFIG__seg_e__BITNR 14 +#define R_MMU_CONFIG__seg_e__WIDTH 1 +#define R_MMU_CONFIG__seg_e__seg 1 +#define R_MMU_CONFIG__seg_e__page 0 +#define R_MMU_CONFIG__seg_d__BITNR 13 +#define R_MMU_CONFIG__seg_d__WIDTH 1 +#define R_MMU_CONFIG__seg_d__seg 1 +#define R_MMU_CONFIG__seg_d__page 0 +#define R_MMU_CONFIG__seg_c__BITNR 12 +#define R_MMU_CONFIG__seg_c__WIDTH 1 +#define R_MMU_CONFIG__seg_c__seg 1 +#define R_MMU_CONFIG__seg_c__page 0 +#define R_MMU_CONFIG__seg_b__BITNR 11 +#define R_MMU_CONFIG__seg_b__WIDTH 1 +#define R_MMU_CONFIG__seg_b__seg 1 +#define R_MMU_CONFIG__seg_b__page 0 +#define R_MMU_CONFIG__seg_a__BITNR 10 +#define R_MMU_CONFIG__seg_a__WIDTH 1 +#define R_MMU_CONFIG__seg_a__seg 1 +#define R_MMU_CONFIG__seg_a__page 0 +#define R_MMU_CONFIG__seg_9__BITNR 9 +#define R_MMU_CONFIG__seg_9__WIDTH 1 +#define R_MMU_CONFIG__seg_9__seg 1 +#define R_MMU_CONFIG__seg_9__page 0 +#define R_MMU_CONFIG__seg_8__BITNR 8 +#define R_MMU_CONFIG__seg_8__WIDTH 1 +#define R_MMU_CONFIG__seg_8__seg 1 +#define R_MMU_CONFIG__seg_8__page 0 +#define R_MMU_CONFIG__seg_7__BITNR 7 +#define R_MMU_CONFIG__seg_7__WIDTH 1 +#define R_MMU_CONFIG__seg_7__seg 1 +#define R_MMU_CONFIG__seg_7__page 0 +#define R_MMU_CONFIG__seg_6__BITNR 6 +#define R_MMU_CONFIG__seg_6__WIDTH 1 +#define R_MMU_CONFIG__seg_6__seg 1 +#define R_MMU_CONFIG__seg_6__page 0 +#define R_MMU_CONFIG__seg_5__BITNR 5 +#define R_MMU_CONFIG__seg_5__WIDTH 1 +#define R_MMU_CONFIG__seg_5__seg 1 +#define R_MMU_CONFIG__seg_5__page 0 +#define R_MMU_CONFIG__seg_4__BITNR 4 +#define R_MMU_CONFIG__seg_4__WIDTH 1 +#define R_MMU_CONFIG__seg_4__seg 1 +#define R_MMU_CONFIG__seg_4__page 0 +#define R_MMU_CONFIG__seg_3__BITNR 3 +#define R_MMU_CONFIG__seg_3__WIDTH 1 +#define R_MMU_CONFIG__seg_3__seg 1 +#define R_MMU_CONFIG__seg_3__page 0 +#define R_MMU_CONFIG__seg_2__BITNR 2 +#define R_MMU_CONFIG__seg_2__WIDTH 1 +#define R_MMU_CONFIG__seg_2__seg 1 +#define R_MMU_CONFIG__seg_2__page 0 +#define R_MMU_CONFIG__seg_1__BITNR 1 +#define R_MMU_CONFIG__seg_1__WIDTH 1 +#define R_MMU_CONFIG__seg_1__seg 1 +#define R_MMU_CONFIG__seg_1__page 0 +#define R_MMU_CONFIG__seg_0__BITNR 0 +#define R_MMU_CONFIG__seg_0__WIDTH 1 +#define R_MMU_CONFIG__seg_0__seg 1 +#define R_MMU_CONFIG__seg_0__page 0 + +#define R_MMU_KSEG (IO_TYPECAST_UWORD 0xb0000240) +#define R_MMU_KSEG__seg_f__BITNR 15 +#define R_MMU_KSEG__seg_f__WIDTH 1 +#define R_MMU_KSEG__seg_f__seg 1 +#define R_MMU_KSEG__seg_f__page 0 +#define R_MMU_KSEG__seg_e__BITNR 14 +#define R_MMU_KSEG__seg_e__WIDTH 1 +#define R_MMU_KSEG__seg_e__seg 1 +#define R_MMU_KSEG__seg_e__page 0 +#define R_MMU_KSEG__seg_d__BITNR 13 +#define R_MMU_KSEG__seg_d__WIDTH 1 +#define R_MMU_KSEG__seg_d__seg 1 +#define R_MMU_KSEG__seg_d__page 0 +#define R_MMU_KSEG__seg_c__BITNR 12 +#define R_MMU_KSEG__seg_c__WIDTH 1 +#define R_MMU_KSEG__seg_c__seg 1 +#define R_MMU_KSEG__seg_c__page 0 +#define R_MMU_KSEG__seg_b__BITNR 11 +#define R_MMU_KSEG__seg_b__WIDTH 1 +#define R_MMU_KSEG__seg_b__seg 1 +#define R_MMU_KSEG__seg_b__page 0 +#define R_MMU_KSEG__seg_a__BITNR 10 +#define R_MMU_KSEG__seg_a__WIDTH 1 +#define R_MMU_KSEG__seg_a__seg 1 +#define R_MMU_KSEG__seg_a__page 0 +#define R_MMU_KSEG__seg_9__BITNR 9 +#define R_MMU_KSEG__seg_9__WIDTH 1 +#define R_MMU_KSEG__seg_9__seg 1 +#define R_MMU_KSEG__seg_9__page 0 +#define R_MMU_KSEG__seg_8__BITNR 8 +#define R_MMU_KSEG__seg_8__WIDTH 1 +#define R_MMU_KSEG__seg_8__seg 1 +#define R_MMU_KSEG__seg_8__page 0 +#define R_MMU_KSEG__seg_7__BITNR 7 +#define R_MMU_KSEG__seg_7__WIDTH 1 +#define R_MMU_KSEG__seg_7__seg 1 +#define R_MMU_KSEG__seg_7__page 0 +#define R_MMU_KSEG__seg_6__BITNR 6 +#define R_MMU_KSEG__seg_6__WIDTH 1 +#define R_MMU_KSEG__seg_6__seg 1 +#define R_MMU_KSEG__seg_6__page 0 +#define R_MMU_KSEG__seg_5__BITNR 5 +#define R_MMU_KSEG__seg_5__WIDTH 1 +#define R_MMU_KSEG__seg_5__seg 1 +#define R_MMU_KSEG__seg_5__page 0 +#define R_MMU_KSEG__seg_4__BITNR 4 +#define R_MMU_KSEG__seg_4__WIDTH 1 +#define R_MMU_KSEG__seg_4__seg 1 +#define R_MMU_KSEG__seg_4__page 0 +#define R_MMU_KSEG__seg_3__BITNR 3 +#define R_MMU_KSEG__seg_3__WIDTH 1 +#define R_MMU_KSEG__seg_3__seg 1 +#define R_MMU_KSEG__seg_3__page 0 +#define R_MMU_KSEG__seg_2__BITNR 2 +#define R_MMU_KSEG__seg_2__WIDTH 1 +#define R_MMU_KSEG__seg_2__seg 1 +#define R_MMU_KSEG__seg_2__page 0 +#define R_MMU_KSEG__seg_1__BITNR 1 +#define R_MMU_KSEG__seg_1__WIDTH 1 +#define R_MMU_KSEG__seg_1__seg 1 +#define R_MMU_KSEG__seg_1__page 0 +#define R_MMU_KSEG__seg_0__BITNR 0 +#define R_MMU_KSEG__seg_0__WIDTH 1 +#define R_MMU_KSEG__seg_0__seg 1 +#define R_MMU_KSEG__seg_0__page 0 + +#define R_MMU_CTRL (IO_TYPECAST_BYTE 0xb0000242) +#define R_MMU_CTRL__inv_excp__BITNR 2 +#define R_MMU_CTRL__inv_excp__WIDTH 1 +#define R_MMU_CTRL__inv_excp__enable 1 +#define R_MMU_CTRL__inv_excp__disable 0 +#define R_MMU_CTRL__acc_excp__BITNR 1 +#define R_MMU_CTRL__acc_excp__WIDTH 1 +#define R_MMU_CTRL__acc_excp__enable 1 +#define R_MMU_CTRL__acc_excp__disable 0 +#define R_MMU_CTRL__we_excp__BITNR 0 +#define R_MMU_CTRL__we_excp__WIDTH 1 +#define R_MMU_CTRL__we_excp__enable 1 +#define R_MMU_CTRL__we_excp__disable 0 + +#define R_MMU_ENABLE (IO_TYPECAST_BYTE 0xb0000243) +#define R_MMU_ENABLE__mmu_enable__BITNR 7 +#define R_MMU_ENABLE__mmu_enable__WIDTH 1 +#define R_MMU_ENABLE__mmu_enable__enable 1 +#define R_MMU_ENABLE__mmu_enable__disable 0 + +#define R_MMU_KBASE_LO (IO_TYPECAST_UDWORD 0xb0000244) +#define R_MMU_KBASE_LO__base_7__BITNR 28 +#define R_MMU_KBASE_LO__base_7__WIDTH 4 +#define R_MMU_KBASE_LO__base_6__BITNR 24 +#define R_MMU_KBASE_LO__base_6__WIDTH 4 +#define R_MMU_KBASE_LO__base_5__BITNR 20 +#define R_MMU_KBASE_LO__base_5__WIDTH 4 +#define R_MMU_KBASE_LO__base_4__BITNR 16 +#define R_MMU_KBASE_LO__base_4__WIDTH 4 +#define R_MMU_KBASE_LO__base_3__BITNR 12 +#define R_MMU_KBASE_LO__base_3__WIDTH 4 +#define R_MMU_KBASE_LO__base_2__BITNR 8 +#define R_MMU_KBASE_LO__base_2__WIDTH 4 +#define R_MMU_KBASE_LO__base_1__BITNR 4 +#define R_MMU_KBASE_LO__base_1__WIDTH 4 +#define R_MMU_KBASE_LO__base_0__BITNR 0 +#define R_MMU_KBASE_LO__base_0__WIDTH 4 + +#define R_MMU_KBASE_HI (IO_TYPECAST_UDWORD 0xb0000248) +#define R_MMU_KBASE_HI__base_f__BITNR 28 +#define R_MMU_KBASE_HI__base_f__WIDTH 4 +#define R_MMU_KBASE_HI__base_e__BITNR 24 +#define R_MMU_KBASE_HI__base_e__WIDTH 4 +#define R_MMU_KBASE_HI__base_d__BITNR 20 +#define R_MMU_KBASE_HI__base_d__WIDTH 4 +#define R_MMU_KBASE_HI__base_c__BITNR 16 +#define R_MMU_KBASE_HI__base_c__WIDTH 4 +#define R_MMU_KBASE_HI__base_b__BITNR 12 +#define R_MMU_KBASE_HI__base_b__WIDTH 4 +#define R_MMU_KBASE_HI__base_a__BITNR 8 +#define R_MMU_KBASE_HI__base_a__WIDTH 4 +#define R_MMU_KBASE_HI__base_9__BITNR 4 +#define R_MMU_KBASE_HI__base_9__WIDTH 4 +#define R_MMU_KBASE_HI__base_8__BITNR 0 +#define R_MMU_KBASE_HI__base_8__WIDTH 4 + +#define R_MMU_CONTEXT (IO_TYPECAST_BYTE 0xb000024c) +#define R_MMU_CONTEXT__page_id__BITNR 0 +#define R_MMU_CONTEXT__page_id__WIDTH 6 + +#define R_MMU_CAUSE (IO_TYPECAST_RO_UDWORD 0xb0000250) +#define R_MMU_CAUSE__vpn__BITNR 13 +#define R_MMU_CAUSE__vpn__WIDTH 19 +#define R_MMU_CAUSE__miss_excp__BITNR 12 +#define R_MMU_CAUSE__miss_excp__WIDTH 1 +#define R_MMU_CAUSE__miss_excp__yes 1 +#define R_MMU_CAUSE__miss_excp__no 0 +#define R_MMU_CAUSE__inv_excp__BITNR 11 +#define R_MMU_CAUSE__inv_excp__WIDTH 1 +#define R_MMU_CAUSE__inv_excp__yes 1 +#define R_MMU_CAUSE__inv_excp__no 0 +#define R_MMU_CAUSE__acc_excp__BITNR 10 +#define R_MMU_CAUSE__acc_excp__WIDTH 1 +#define R_MMU_CAUSE__acc_excp__yes 1 +#define R_MMU_CAUSE__acc_excp__no 0 +#define R_MMU_CAUSE__we_excp__BITNR 9 +#define R_MMU_CAUSE__we_excp__WIDTH 1 +#define R_MMU_CAUSE__we_excp__yes 1 +#define R_MMU_CAUSE__we_excp__no 0 +#define R_MMU_CAUSE__wr_rd__BITNR 8 +#define R_MMU_CAUSE__wr_rd__WIDTH 1 +#define R_MMU_CAUSE__wr_rd__write 1 +#define R_MMU_CAUSE__wr_rd__read 0 +#define R_MMU_CAUSE__page_id__BITNR 0 +#define R_MMU_CAUSE__page_id__WIDTH 6 + +#define R_TLB_SELECT (IO_TYPECAST_BYTE 0xb0000254) +#define R_TLB_SELECT__index__BITNR 0 +#define R_TLB_SELECT__index__WIDTH 6 + +#define R_TLB_LO (IO_TYPECAST_UDWORD 0xb0000258) +#define R_TLB_LO__pfn__BITNR 13 +#define R_TLB_LO__pfn__WIDTH 19 +#define R_TLB_LO__global__BITNR 3 +#define R_TLB_LO__global__WIDTH 1 +#define R_TLB_LO__global__yes 1 +#define R_TLB_LO__global__no 0 +#define R_TLB_LO__valid__BITNR 2 +#define R_TLB_LO__valid__WIDTH 1 +#define R_TLB_LO__valid__yes 1 +#define R_TLB_LO__valid__no 0 +#define R_TLB_LO__kernel__BITNR 1 +#define R_TLB_LO__kernel__WIDTH 1 +#define R_TLB_LO__kernel__yes 1 +#define R_TLB_LO__kernel__no 0 +#define R_TLB_LO__we__BITNR 0 +#define R_TLB_LO__we__WIDTH 1 +#define R_TLB_LO__we__yes 1 +#define R_TLB_LO__we__no 0 + +#define R_TLB_HI (IO_TYPECAST_UDWORD 0xb000025c) +#define R_TLB_HI__vpn__BITNR 13 +#define R_TLB_HI__vpn__WIDTH 19 +#define R_TLB_HI__page_id__BITNR 0 +#define R_TLB_HI__page_id__WIDTH 6 + +/* +!* Syncrounous serial port registers +!*/ + +#define R_SYNC_SERIAL1_REC_DATA (IO_TYPECAST_RO_UDWORD 0xb000006c) +#define R_SYNC_SERIAL1_REC_DATA__data_in__BITNR 0 +#define R_SYNC_SERIAL1_REC_DATA__data_in__WIDTH 32 + +#define R_SYNC_SERIAL1_REC_WORD (IO_TYPECAST_RO_UWORD 0xb000006c) +#define R_SYNC_SERIAL1_REC_WORD__data_in__BITNR 0 +#define R_SYNC_SERIAL1_REC_WORD__data_in__WIDTH 16 + +#define R_SYNC_SERIAL1_REC_BYTE (IO_TYPECAST_RO_BYTE 0xb000006c) +#define R_SYNC_SERIAL1_REC_BYTE__data_in__BITNR 0 +#define R_SYNC_SERIAL1_REC_BYTE__data_in__WIDTH 8 + +#define R_SYNC_SERIAL1_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000068) +#define R_SYNC_SERIAL1_STATUS__rec_status__BITNR 15 +#define R_SYNC_SERIAL1_STATUS__rec_status__WIDTH 1 +#define R_SYNC_SERIAL1_STATUS__rec_status__running 0 +#define R_SYNC_SERIAL1_STATUS__rec_status__idle 1 +#define R_SYNC_SERIAL1_STATUS__tr_empty__BITNR 14 +#define R_SYNC_SERIAL1_STATUS__tr_empty__WIDTH 1 +#define R_SYNC_SERIAL1_STATUS__tr_empty__empty 1 +#define R_SYNC_SERIAL1_STATUS__tr_empty__not_empty 0 +#define R_SYNC_SERIAL1_STATUS__tr_ready__BITNR 13 +#define R_SYNC_SERIAL1_STATUS__tr_ready__WIDTH 1 +#define R_SYNC_SERIAL1_STATUS__tr_ready__full 0 +#define R_SYNC_SERIAL1_STATUS__tr_ready__ready 1 +#define R_SYNC_SERIAL1_STATUS__pin_1__BITNR 12 +#define R_SYNC_SERIAL1_STATUS__pin_1__WIDTH 1 +#define R_SYNC_SERIAL1_STATUS__pin_1__low 0 +#define R_SYNC_SERIAL1_STATUS__pin_1__high 1 +#define R_SYNC_SERIAL1_STATUS__pin_0__BITNR 11 +#define R_SYNC_SERIAL1_STATUS__pin_0__WIDTH 1 +#define R_SYNC_SERIAL1_STATUS__pin_0__low 0 +#define R_SYNC_SERIAL1_STATUS__pin_0__high 1 +#define R_SYNC_SERIAL1_STATUS__underflow__BITNR 10 +#define R_SYNC_SERIAL1_STATUS__underflow__WIDTH 1 +#define R_SYNC_SERIAL1_STATUS__underflow__no 0 +#define R_SYNC_SERIAL1_STATUS__underflow__yes 1 +#define R_SYNC_SERIAL1_STATUS__overrun__BITNR 9 +#define R_SYNC_SERIAL1_STATUS__overrun__WIDTH 1 +#define R_SYNC_SERIAL1_STATUS__overrun__no 0 +#define R_SYNC_SERIAL1_STATUS__overrun__yes 1 +#define R_SYNC_SERIAL1_STATUS__data_avail__BITNR 8 +#define R_SYNC_SERIAL1_STATUS__data_avail__WIDTH 1 +#define R_SYNC_SERIAL1_STATUS__data_avail__no 0 +#define R_SYNC_SERIAL1_STATUS__data_avail__yes 1 +#define R_SYNC_SERIAL1_STATUS__data__BITNR 0 +#define R_SYNC_SERIAL1_STATUS__data__WIDTH 8 + +#define R_SYNC_SERIAL1_TR_DATA (IO_TYPECAST_UDWORD 0xb000006c) +#define R_SYNC_SERIAL1_TR_DATA__data_out__BITNR 0 +#define R_SYNC_SERIAL1_TR_DATA__data_out__WIDTH 32 + +#define R_SYNC_SERIAL1_TR_WORD (IO_TYPECAST_UWORD 0xb000006c) +#define R_SYNC_SERIAL1_TR_WORD__data_out__BITNR 0 +#define R_SYNC_SERIAL1_TR_WORD__data_out__WIDTH 16 + +#define R_SYNC_SERIAL1_TR_BYTE (IO_TYPECAST_BYTE 0xb000006c) +#define R_SYNC_SERIAL1_TR_BYTE__data_out__BITNR 0 +#define R_SYNC_SERIAL1_TR_BYTE__data_out__WIDTH 8 + +#define R_SYNC_SERIAL1_CTRL (IO_TYPECAST_UDWORD 0xb0000068) +#define R_SYNC_SERIAL1_CTRL__tr_baud__BITNR 28 +#define R_SYNC_SERIAL1_CTRL__tr_baud__WIDTH 4 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c150Hz 0 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c300Hz 1 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c600Hz 2 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c1200Hz 3 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c2400Hz 4 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c4800Hz 5 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c9600Hz 6 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c19k2Hz 7 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c28k8Hz 8 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c57k6Hz 9 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c115k2Hz 10 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c230k4Hz 11 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c460k8Hz 12 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c921k6Hz 13 +#define R_SYNC_SERIAL1_CTRL__tr_baud__c3125kHz 14 +#define R_SYNC_SERIAL1_CTRL__tr_baud__reserved 15 +#define R_SYNC_SERIAL1_CTRL__dma_enable__BITNR 27 +#define R_SYNC_SERIAL1_CTRL__dma_enable__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__dma_enable__on 1 +#define R_SYNC_SERIAL1_CTRL__dma_enable__off 0 +#define R_SYNC_SERIAL1_CTRL__mode__BITNR 24 +#define R_SYNC_SERIAL1_CTRL__mode__WIDTH 3 +#define R_SYNC_SERIAL1_CTRL__mode__master_output 0 +#define R_SYNC_SERIAL1_CTRL__mode__slave_output 1 +#define R_SYNC_SERIAL1_CTRL__mode__master_input 2 +#define R_SYNC_SERIAL1_CTRL__mode__slave_input 3 +#define R_SYNC_SERIAL1_CTRL__mode__master_bidir 4 +#define R_SYNC_SERIAL1_CTRL__mode__slave_bidir 5 +#define R_SYNC_SERIAL1_CTRL__error__BITNR 23 +#define R_SYNC_SERIAL1_CTRL__error__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__error__normal 0 +#define R_SYNC_SERIAL1_CTRL__error__ignore 1 +#define R_SYNC_SERIAL1_CTRL__rec_enable__BITNR 22 +#define R_SYNC_SERIAL1_CTRL__rec_enable__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__rec_enable__disable 0 +#define R_SYNC_SERIAL1_CTRL__rec_enable__enable 1 +#define R_SYNC_SERIAL1_CTRL__f_synctype__BITNR 21 +#define R_SYNC_SERIAL1_CTRL__f_synctype__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__f_synctype__normal 0 +#define R_SYNC_SERIAL1_CTRL__f_synctype__early 1 +#define R_SYNC_SERIAL1_CTRL__f_syncsize__BITNR 19 +#define R_SYNC_SERIAL1_CTRL__f_syncsize__WIDTH 2 +#define R_SYNC_SERIAL1_CTRL__f_syncsize__bit 0 +#define R_SYNC_SERIAL1_CTRL__f_syncsize__word 1 +#define R_SYNC_SERIAL1_CTRL__f_syncsize__extended 2 +#define R_SYNC_SERIAL1_CTRL__f_syncsize__reserved 3 +#define R_SYNC_SERIAL1_CTRL__f_sync__BITNR 18 +#define R_SYNC_SERIAL1_CTRL__f_sync__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__f_sync__on 0 +#define R_SYNC_SERIAL1_CTRL__f_sync__off 1 +#define R_SYNC_SERIAL1_CTRL__clk_mode__BITNR 17 +#define R_SYNC_SERIAL1_CTRL__clk_mode__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__clk_mode__normal 0 +#define R_SYNC_SERIAL1_CTRL__clk_mode__gated 1 +#define R_SYNC_SERIAL1_CTRL__clk_halt__BITNR 16 +#define R_SYNC_SERIAL1_CTRL__clk_halt__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__clk_halt__running 0 +#define R_SYNC_SERIAL1_CTRL__clk_halt__stopped 1 +#define R_SYNC_SERIAL1_CTRL__bitorder__BITNR 15 +#define R_SYNC_SERIAL1_CTRL__bitorder__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__bitorder__lsb 0 +#define R_SYNC_SERIAL1_CTRL__bitorder__msb 1 +#define R_SYNC_SERIAL1_CTRL__tr_enable__BITNR 14 +#define R_SYNC_SERIAL1_CTRL__tr_enable__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__tr_enable__disable 0 +#define R_SYNC_SERIAL1_CTRL__tr_enable__enable 1 +#define R_SYNC_SERIAL1_CTRL__wordsize__BITNR 11 +#define R_SYNC_SERIAL1_CTRL__wordsize__WIDTH 3 +#define R_SYNC_SERIAL1_CTRL__wordsize__size8bit 0 +#define R_SYNC_SERIAL1_CTRL__wordsize__size12bit 1 +#define R_SYNC_SERIAL1_CTRL__wordsize__size16bit 2 +#define R_SYNC_SERIAL1_CTRL__wordsize__size24bit 3 +#define R_SYNC_SERIAL1_CTRL__wordsize__size32bit 4 +#define R_SYNC_SERIAL1_CTRL__buf_empty__BITNR 10 +#define R_SYNC_SERIAL1_CTRL__buf_empty__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__buf_empty__lmt_8 0 +#define R_SYNC_SERIAL1_CTRL__buf_empty__lmt_0 1 +#define R_SYNC_SERIAL1_CTRL__buf_full__BITNR 9 +#define R_SYNC_SERIAL1_CTRL__buf_full__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__buf_full__lmt_32 0 +#define R_SYNC_SERIAL1_CTRL__buf_full__lmt_8 1 +#define R_SYNC_SERIAL1_CTRL__flow_ctrl__BITNR 8 +#define R_SYNC_SERIAL1_CTRL__flow_ctrl__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__flow_ctrl__disabled 0 +#define R_SYNC_SERIAL1_CTRL__flow_ctrl__enabled 1 +#define R_SYNC_SERIAL1_CTRL__clk_polarity__BITNR 6 +#define R_SYNC_SERIAL1_CTRL__clk_polarity__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__clk_polarity__pos 0 +#define R_SYNC_SERIAL1_CTRL__clk_polarity__neg 1 +#define R_SYNC_SERIAL1_CTRL__frame_polarity__BITNR 5 +#define R_SYNC_SERIAL1_CTRL__frame_polarity__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__frame_polarity__normal 0 +#define R_SYNC_SERIAL1_CTRL__frame_polarity__inverted 1 +#define R_SYNC_SERIAL1_CTRL__status_polarity__BITNR 4 +#define R_SYNC_SERIAL1_CTRL__status_polarity__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__status_polarity__normal 0 +#define R_SYNC_SERIAL1_CTRL__status_polarity__inverted 1 +#define R_SYNC_SERIAL1_CTRL__clk_driver__BITNR 3 +#define R_SYNC_SERIAL1_CTRL__clk_driver__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__clk_driver__normal 0 +#define R_SYNC_SERIAL1_CTRL__clk_driver__inverted 1 +#define R_SYNC_SERIAL1_CTRL__frame_driver__BITNR 2 +#define R_SYNC_SERIAL1_CTRL__frame_driver__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__frame_driver__normal 0 +#define R_SYNC_SERIAL1_CTRL__frame_driver__inverted 1 +#define R_SYNC_SERIAL1_CTRL__status_driver__BITNR 1 +#define R_SYNC_SERIAL1_CTRL__status_driver__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__status_driver__normal 0 +#define R_SYNC_SERIAL1_CTRL__status_driver__inverted 1 +#define R_SYNC_SERIAL1_CTRL__def_out0__BITNR 0 +#define R_SYNC_SERIAL1_CTRL__def_out0__WIDTH 1 +#define R_SYNC_SERIAL1_CTRL__def_out0__high 1 +#define R_SYNC_SERIAL1_CTRL__def_out0__low 0 + +#define R_SYNC_SERIAL3_REC_DATA (IO_TYPECAST_RO_UDWORD 0xb000007c) +#define R_SYNC_SERIAL3_REC_DATA__data_in__BITNR 0 +#define R_SYNC_SERIAL3_REC_DATA__data_in__WIDTH 32 + +#define R_SYNC_SERIAL3_REC_WORD (IO_TYPECAST_RO_UWORD 0xb000007c) +#define R_SYNC_SERIAL3_REC_WORD__data_in__BITNR 0 +#define R_SYNC_SERIAL3_REC_WORD__data_in__WIDTH 16 + +#define R_SYNC_SERIAL3_REC_BYTE (IO_TYPECAST_RO_BYTE 0xb000007c) +#define R_SYNC_SERIAL3_REC_BYTE__data_in__BITNR 0 +#define R_SYNC_SERIAL3_REC_BYTE__data_in__WIDTH 8 + +#define R_SYNC_SERIAL3_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000078) +#define R_SYNC_SERIAL3_STATUS__rec_status__BITNR 15 +#define R_SYNC_SERIAL3_STATUS__rec_status__WIDTH 1 +#define R_SYNC_SERIAL3_STATUS__rec_status__running 0 +#define R_SYNC_SERIAL3_STATUS__rec_status__idle 1 +#define R_SYNC_SERIAL3_STATUS__tr_empty__BITNR 14 +#define R_SYNC_SERIAL3_STATUS__tr_empty__WIDTH 1 +#define R_SYNC_SERIAL3_STATUS__tr_empty__empty 1 +#define R_SYNC_SERIAL3_STATUS__tr_empty__not_empty 0 +#define R_SYNC_SERIAL3_STATUS__tr_ready__BITNR 13 +#define R_SYNC_SERIAL3_STATUS__tr_ready__WIDTH 1 +#define R_SYNC_SERIAL3_STATUS__tr_ready__full 0 +#define R_SYNC_SERIAL3_STATUS__tr_ready__ready 1 +#define R_SYNC_SERIAL3_STATUS__pin_1__BITNR 12 +#define R_SYNC_SERIAL3_STATUS__pin_1__WIDTH 1 +#define R_SYNC_SERIAL3_STATUS__pin_1__low 0 +#define R_SYNC_SERIAL3_STATUS__pin_1__high 1 +#define R_SYNC_SERIAL3_STATUS__pin_0__BITNR 11 +#define R_SYNC_SERIAL3_STATUS__pin_0__WIDTH 1 +#define R_SYNC_SERIAL3_STATUS__pin_0__low 0 +#define R_SYNC_SERIAL3_STATUS__pin_0__high 1 +#define R_SYNC_SERIAL3_STATUS__underflow__BITNR 10 +#define R_SYNC_SERIAL3_STATUS__underflow__WIDTH 1 +#define R_SYNC_SERIAL3_STATUS__underflow__no 0 +#define R_SYNC_SERIAL3_STATUS__underflow__yes 1 +#define R_SYNC_SERIAL3_STATUS__overrun__BITNR 9 +#define R_SYNC_SERIAL3_STATUS__overrun__WIDTH 1 +#define R_SYNC_SERIAL3_STATUS__overrun__no 0 +#define R_SYNC_SERIAL3_STATUS__overrun__yes 1 +#define R_SYNC_SERIAL3_STATUS__data_avail__BITNR 8 +#define R_SYNC_SERIAL3_STATUS__data_avail__WIDTH 1 +#define R_SYNC_SERIAL3_STATUS__data_avail__no 0 +#define R_SYNC_SERIAL3_STATUS__data_avail__yes 1 +#define R_SYNC_SERIAL3_STATUS__data__BITNR 0 +#define R_SYNC_SERIAL3_STATUS__data__WIDTH 8 + +#define R_SYNC_SERIAL3_TR_DATA (IO_TYPECAST_UDWORD 0xb000007c) +#define R_SYNC_SERIAL3_TR_DATA__data_out__BITNR 0 +#define R_SYNC_SERIAL3_TR_DATA__data_out__WIDTH 32 + +#define R_SYNC_SERIAL3_TR_WORD (IO_TYPECAST_UWORD 0xb000007c) +#define R_SYNC_SERIAL3_TR_WORD__data_out__BITNR 0 +#define R_SYNC_SERIAL3_TR_WORD__data_out__WIDTH 16 + +#define R_SYNC_SERIAL3_TR_BYTE (IO_TYPECAST_BYTE 0xb000007c) +#define R_SYNC_SERIAL3_TR_BYTE__data_out__BITNR 0 +#define R_SYNC_SERIAL3_TR_BYTE__data_out__WIDTH 8 + +#define R_SYNC_SERIAL3_CTRL (IO_TYPECAST_UDWORD 0xb0000078) +#define R_SYNC_SERIAL3_CTRL__tr_baud__BITNR 28 +#define R_SYNC_SERIAL3_CTRL__tr_baud__WIDTH 4 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c150Hz 0 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c300Hz 1 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c600Hz 2 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c1200Hz 3 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c2400Hz 4 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c4800Hz 5 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c9600Hz 6 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c19k2Hz 7 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c28k8Hz 8 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c57k6Hz 9 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c115k2Hz 10 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c230k4Hz 11 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c460k8Hz 12 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c921k6Hz 13 +#define R_SYNC_SERIAL3_CTRL__tr_baud__c3125kHz 14 +#define R_SYNC_SERIAL3_CTRL__tr_baud__reserved 15 +#define R_SYNC_SERIAL3_CTRL__dma_enable__BITNR 27 +#define R_SYNC_SERIAL3_CTRL__dma_enable__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__dma_enable__on 1 +#define R_SYNC_SERIAL3_CTRL__dma_enable__off 0 +#define R_SYNC_SERIAL3_CTRL__mode__BITNR 24 +#define R_SYNC_SERIAL3_CTRL__mode__WIDTH 3 +#define R_SYNC_SERIAL3_CTRL__mode__master_output 0 +#define R_SYNC_SERIAL3_CTRL__mode__slave_output 1 +#define R_SYNC_SERIAL3_CTRL__mode__master_input 2 +#define R_SYNC_SERIAL3_CTRL__mode__slave_input 3 +#define R_SYNC_SERIAL3_CTRL__mode__master_bidir 4 +#define R_SYNC_SERIAL3_CTRL__mode__slave_bidir 5 +#define R_SYNC_SERIAL3_CTRL__error__BITNR 23 +#define R_SYNC_SERIAL3_CTRL__error__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__error__normal 0 +#define R_SYNC_SERIAL3_CTRL__error__ignore 1 +#define R_SYNC_SERIAL3_CTRL__rec_enable__BITNR 22 +#define R_SYNC_SERIAL3_CTRL__rec_enable__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__rec_enable__disable 0 +#define R_SYNC_SERIAL3_CTRL__rec_enable__enable 1 +#define R_SYNC_SERIAL3_CTRL__f_synctype__BITNR 21 +#define R_SYNC_SERIAL3_CTRL__f_synctype__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__f_synctype__normal 0 +#define R_SYNC_SERIAL3_CTRL__f_synctype__early 1 +#define R_SYNC_SERIAL3_CTRL__f_syncsize__BITNR 19 +#define R_SYNC_SERIAL3_CTRL__f_syncsize__WIDTH 2 +#define R_SYNC_SERIAL3_CTRL__f_syncsize__bit 0 +#define R_SYNC_SERIAL3_CTRL__f_syncsize__word 1 +#define R_SYNC_SERIAL3_CTRL__f_syncsize__extended 2 +#define R_SYNC_SERIAL3_CTRL__f_syncsize__reserved 3 +#define R_SYNC_SERIAL3_CTRL__f_sync__BITNR 18 +#define R_SYNC_SERIAL3_CTRL__f_sync__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__f_sync__on 0 +#define R_SYNC_SERIAL3_CTRL__f_sync__off 1 +#define R_SYNC_SERIAL3_CTRL__clk_mode__BITNR 17 +#define R_SYNC_SERIAL3_CTRL__clk_mode__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__clk_mode__normal 0 +#define R_SYNC_SERIAL3_CTRL__clk_mode__gated 1 +#define R_SYNC_SERIAL3_CTRL__clk_halt__BITNR 16 +#define R_SYNC_SERIAL3_CTRL__clk_halt__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__clk_halt__running 0 +#define R_SYNC_SERIAL3_CTRL__clk_halt__stopped 1 +#define R_SYNC_SERIAL3_CTRL__bitorder__BITNR 15 +#define R_SYNC_SERIAL3_CTRL__bitorder__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__bitorder__lsb 0 +#define R_SYNC_SERIAL3_CTRL__bitorder__msb 1 +#define R_SYNC_SERIAL3_CTRL__tr_enable__BITNR 14 +#define R_SYNC_SERIAL3_CTRL__tr_enable__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__tr_enable__disable 0 +#define R_SYNC_SERIAL3_CTRL__tr_enable__enable 1 +#define R_SYNC_SERIAL3_CTRL__wordsize__BITNR 11 +#define R_SYNC_SERIAL3_CTRL__wordsize__WIDTH 3 +#define R_SYNC_SERIAL3_CTRL__wordsize__size8bit 0 +#define R_SYNC_SERIAL3_CTRL__wordsize__size12bit 1 +#define R_SYNC_SERIAL3_CTRL__wordsize__size16bit 2 +#define R_SYNC_SERIAL3_CTRL__wordsize__size24bit 3 +#define R_SYNC_SERIAL3_CTRL__wordsize__size32bit 4 +#define R_SYNC_SERIAL3_CTRL__buf_empty__BITNR 10 +#define R_SYNC_SERIAL3_CTRL__buf_empty__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__buf_empty__lmt_8 0 +#define R_SYNC_SERIAL3_CTRL__buf_empty__lmt_0 1 +#define R_SYNC_SERIAL3_CTRL__buf_full__BITNR 9 +#define R_SYNC_SERIAL3_CTRL__buf_full__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__buf_full__lmt_32 0 +#define R_SYNC_SERIAL3_CTRL__buf_full__lmt_8 1 +#define R_SYNC_SERIAL3_CTRL__flow_ctrl__BITNR 8 +#define R_SYNC_SERIAL3_CTRL__flow_ctrl__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__flow_ctrl__disabled 0 +#define R_SYNC_SERIAL3_CTRL__flow_ctrl__enabled 1 +#define R_SYNC_SERIAL3_CTRL__clk_polarity__BITNR 6 +#define R_SYNC_SERIAL3_CTRL__clk_polarity__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__clk_polarity__pos 0 +#define R_SYNC_SERIAL3_CTRL__clk_polarity__neg 1 +#define R_SYNC_SERIAL3_CTRL__frame_polarity__BITNR 5 +#define R_SYNC_SERIAL3_CTRL__frame_polarity__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__frame_polarity__normal 0 +#define R_SYNC_SERIAL3_CTRL__frame_polarity__inverted 1 +#define R_SYNC_SERIAL3_CTRL__status_polarity__BITNR 4 +#define R_SYNC_SERIAL3_CTRL__status_polarity__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__status_polarity__normal 0 +#define R_SYNC_SERIAL3_CTRL__status_polarity__inverted 1 +#define R_SYNC_SERIAL3_CTRL__clk_driver__BITNR 3 +#define R_SYNC_SERIAL3_CTRL__clk_driver__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__clk_driver__normal 0 +#define R_SYNC_SERIAL3_CTRL__clk_driver__inverted 1 +#define R_SYNC_SERIAL3_CTRL__frame_driver__BITNR 2 +#define R_SYNC_SERIAL3_CTRL__frame_driver__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__frame_driver__normal 0 +#define R_SYNC_SERIAL3_CTRL__frame_driver__inverted 1 +#define R_SYNC_SERIAL3_CTRL__status_driver__BITNR 1 +#define R_SYNC_SERIAL3_CTRL__status_driver__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__status_driver__normal 0 +#define R_SYNC_SERIAL3_CTRL__status_driver__inverted 1 +#define R_SYNC_SERIAL3_CTRL__def_out0__BITNR 0 +#define R_SYNC_SERIAL3_CTRL__def_out0__WIDTH 1 +#define R_SYNC_SERIAL3_CTRL__def_out0__high 1 +#define R_SYNC_SERIAL3_CTRL__def_out0__low 0 + diff --git a/arch/cris/include/arch-v10/arch/sv_addr_ag.h b/arch/cris/include/arch-v10/arch/sv_addr_ag.h new file mode 100644 index 000000000000..e4a6b68b8982 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/sv_addr_ag.h @@ -0,0 +1,139 @@ +/*!************************************************************************** +*! +*! MACROS: +*! IO_MASK(reg,field) +*! IO_STATE(reg,field,state) +*! IO_EXTRACT(reg,field,val) +*! IO_STATE_VALUE(reg,field,state) +*! IO_BITNR(reg,field) +*! IO_WIDTH(reg,field) +*! IO_FIELD(reg,field,val) +*! IO_RD(reg) +*! All moderegister addresses and fields of these. +*! +*!**************************************************************************/ + +#ifndef __sv_addr_ag_h__ +#define __sv_addr_ag_h__ + + +#define __test_sv_addr__ 0 + +/*------------------------------------------------------------ +!* General macros to manipulate moderegisters. +!*-----------------------------------------------------------*/ + +/* IO_MASK returns a mask for a specified bitfield in a register. + Note that this macro doesn't work when field width is 32 bits. */ +#define IO_MASK(reg, field) IO_MASK_ (reg##_, field##_) +#define IO_MASK_(reg_, field_) \ + ( ( ( 1 << reg_##_##field_##_WIDTH ) - 1 ) << reg_##_##field_##_BITNR ) + +/* IO_STATE returns a constant corresponding to a one of the symbolic + states that the bitfield can have. (Shifted to correct position) */ +#define IO_STATE(reg, field, state) IO_STATE_ (reg##_, field##_, _##state) +#define IO_STATE_(reg_, field_, _state) \ + ( reg_##_##field_##_state << reg_##_##field_##_BITNR ) + +/* IO_EXTRACT returns the masked and shifted value corresponding to the + bitfield can have. */ +#define IO_EXTRACT(reg, field, val) IO_EXTRACT_ (reg##_, field##_, val) +#define IO_EXTRACT_(reg_, field_, val) ( (( ( ( 1 << reg_##_##field_##_WIDTH ) \ + - 1 ) << reg_##_##field_##_BITNR ) & (val)) >> reg_##_##field_##_BITNR ) + +/* IO_STATE_VALUE returns a constant corresponding to a one of the symbolic + states that the bitfield can have. (Not shifted) */ +#define IO_STATE_VALUE(reg, field, state) \ + IO_STATE_VALUE_ (reg##_, field##_, _##state) +#define IO_STATE_VALUE_(reg_, field_, _state) ( reg_##_##field_##_state ) + +/* IO_FIELD shifts the val parameter to be aligned with the bitfield + specified. */ +#define IO_FIELD(reg, field, val) IO_FIELD_ (reg##_, field##_, val) +#define IO_FIELD_(reg_, field_, val) ((val) << reg_##_##field_##_BITNR) + +/* IO_BITNR returns the starting bitnumber of a bitfield. Bit 0 is + LSB and the returned bitnumber is LSB of the field. */ +#define IO_BITNR(reg, field) IO_BITNR_ (reg##_, field##_) +#define IO_BITNR_(reg_, field_) (reg_##_##field_##_BITNR) + +/* IO_WIDTH returns the width, in bits, of a bitfield. */ +#define IO_WIDTH(reg, field) IO_WIDTH_ (reg##_, field##_) +#define IO_WIDTH_(reg_, field_) (reg_##_##field_##_WIDTH) + +/*--- Obsolete. Kept for backw compatibility. ---*/ +/* Reads (or writes) a byte/uword/udword from the specified mode + register. */ +#define IO_RD(reg) (*(volatile u32*)(reg)) +#define IO_RD_B(reg) (*(volatile u8*)(reg)) +#define IO_RD_W(reg) (*(volatile u16*)(reg)) +#define IO_RD_D(reg) (*(volatile u32*)(reg)) + +/*------------------------------------------------------------ +!* Start addresses of the different memory areas. +!*-----------------------------------------------------------*/ + +#define MEM_CSE0_START (0x00000000) +#define MEM_CSE0_SIZE (0x04000000) +#define MEM_CSE1_START (0x04000000) +#define MEM_CSE1_SIZE (0x04000000) +#define MEM_CSR0_START (0x08000000) +#define MEM_CSR1_START (0x0c000000) +#define MEM_CSP0_START (0x10000000) +#define MEM_CSP1_START (0x14000000) +#define MEM_CSP2_START (0x18000000) +#define MEM_CSP3_START (0x1c000000) +#define MEM_CSP4_START (0x20000000) +#define MEM_CSP5_START (0x24000000) +#define MEM_CSP6_START (0x28000000) +#define MEM_CSP7_START (0x2c000000) +#define MEM_DRAM_START (0x40000000) + +#define MEM_NON_CACHEABLE (0x80000000) + +/*------------------------------------------------------------ +!* Type casts used in mode register macros, making pointer +!* dereferencing possible. Empty in assembler. +!*-----------------------------------------------------------*/ + +#ifndef __ASSEMBLER__ +# define IO_TYPECAST_UDWORD (volatile u32*) +# define IO_TYPECAST_RO_UDWORD (const volatile u32*) +# define IO_TYPECAST_UWORD (volatile u16*) +# define IO_TYPECAST_RO_UWORD (const volatile u16*) +# define IO_TYPECAST_BYTE (volatile u8*) +# define IO_TYPECAST_RO_BYTE (const volatile u8*) +#else +# define IO_TYPECAST_UDWORD +# define IO_TYPECAST_RO_UDWORD +# define IO_TYPECAST_UWORD +# define IO_TYPECAST_RO_UWORD +# define IO_TYPECAST_BYTE +# define IO_TYPECAST_RO_BYTE +#endif + +/*------------------------------------------------------------*/ + +#include "sv_addr.agh" + +#if __test_sv_addr__ +/* IO_MASK( R_BUS_CONFIG , CE ) */ +IO_MASK( R_WAITSTATES , SRAM_WS ) +IO_MASK( R_TEST , W32 ) + +IO_STATE( R_BUS_CONFIG, CE, DISABLE ) +IO_STATE( R_BUS_CONFIG, CE, ENABLE ) + +IO_STATE( R_DRAM_TIMING, REF, IVAL2 ) + +IO_MASK( R_DRAM_TIMING, REF ) + +IO_MASK( R_EXT_DMA_0_STAT, TFR_COUNT ) >> IO_BITNR( R_EXT_DMA_0_STAT, TFR_COUNT ) + +IO_RD(R_EXT_DMA_0_STAT) & IO_MASK( R_EXT_DMA_0_STAT, S ) + == IO_STATE( R_EXT_DMA_0_STAT, S, STARTED ) +#endif + + +#endif /* ifndef __sv_addr_ag_h__ */ + diff --git a/arch/cris/include/arch-v10/arch/svinto.h b/arch/cris/include/arch-v10/arch/svinto.h new file mode 100644 index 000000000000..0881a1af7cee --- /dev/null +++ b/arch/cris/include/arch-v10/arch/svinto.h @@ -0,0 +1,64 @@ +#ifndef _ASM_CRIS_SVINTO_H +#define _ASM_CRIS_SVINTO_H + +#include "sv_addr_ag.h" + +extern unsigned int genconfig_shadow; /* defined and set in head.S */ + +/* dma stuff */ + +enum { /* Available in: */ + d_eol = (1 << 0), /* flags */ + d_eop = (1 << 1), /* flags & status */ + d_wait = (1 << 2), /* flags */ + d_int = (1 << 3), /* flags */ + d_txerr = (1 << 4), /* flags */ + d_stop = (1 << 4), /* status */ + d_ecp = (1 << 4), /* flags & status */ + d_pri = (1 << 5), /* flags & status */ + d_alignerr = (1 << 6), /* status */ + d_crcerr = (1 << 7) /* status */ +}; + +/* Do remember that DMA does not go through the MMU and needs + * a real physical address, not an address virtually mapped or + * paged. Therefore the buf/next ptrs below are unsigned long instead + * of void * to give a warning if you try to put a pointer directly + * to them instead of going through virt_to_phys/phys_to_virt. + */ + +typedef struct etrax_dma_descr { + unsigned short sw_len; /* 0-1 */ + unsigned short ctrl; /* 2-3 */ + unsigned long next; /* 4-7 */ + unsigned long buf; /* 8-11 */ + unsigned short hw_len; /* 12-13 */ + unsigned char status; /* 14 */ + unsigned char fifo_len; /* 15 */ +} etrax_dma_descr; + + +/* Use this for constant numbers only */ +#define RESET_DMA_NUM( n ) \ + *R_DMA_CH##n##_CMD = IO_STATE( R_DMA_CH0_CMD, cmd, reset ) + +/* Use this for constant numbers or symbols, + * having two macros makes it possible to use constant expressions. + */ +#define RESET_DMA( n ) RESET_DMA_NUM( n ) + + +/* Use this for constant numbers only */ +#define WAIT_DMA_NUM( n ) \ + while( (*R_DMA_CH##n##_CMD & IO_MASK( R_DMA_CH0_CMD, cmd )) != \ + IO_STATE( R_DMA_CH0_CMD, cmd, hold ) ) + +/* Use this for constant numbers or symbols + * having two macros makes it possible to use constant expressions. + */ +#define WAIT_DMA( n ) WAIT_DMA_NUM( n ) + +extern void prepare_rx_descriptor(struct etrax_dma_descr *desc); +extern void flush_etrax_cache(void); + +#endif diff --git a/arch/cris/include/arch-v10/arch/system.h b/arch/cris/include/arch-v10/arch/system.h new file mode 100644 index 000000000000..4a9cd36c9e16 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/system.h @@ -0,0 +1,63 @@ +#ifndef __ASM_CRIS_ARCH_SYSTEM_H +#define __ASM_CRIS_ARCH_SYSTEM_H + + +/* read the CPU version register */ + +static inline unsigned long rdvr(void) { + unsigned char vr; + __asm__ volatile ("move $vr,%0" : "=rm" (vr)); + return vr; +} + +#define cris_machine_name "cris" + +/* read/write the user-mode stackpointer */ + +static inline unsigned long rdusp(void) { + unsigned long usp; + __asm__ __volatile__("move $usp,%0" : "=rm" (usp)); + return usp; +} + +#define wrusp(usp) \ + __asm__ __volatile__("move %0,$usp" : /* no outputs */ : "rm" (usp)) + +/* read the current stackpointer */ + +static inline unsigned long rdsp(void) { + unsigned long sp; + __asm__ __volatile__("move.d $sp,%0" : "=rm" (sp)); + return sp; +} + +static inline unsigned long _get_base(char * addr) +{ + return 0; +} + +#define nop() __asm__ __volatile__ ("nop"); + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) +#define tas(ptr) (xchg((ptr),1)) + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((struct __xchg_dummy *)(x)) + +/* interrupt control.. */ +#define local_save_flags(x) __asm__ __volatile__ ("move $ccr,%0" : "=rm" (x) : : "memory"); +#define local_irq_restore(x) __asm__ __volatile__ ("move %0,$ccr" : : "rm" (x) : "memory"); +#define local_irq_disable() __asm__ __volatile__ ( "di" : : :"memory"); +#define local_irq_enable() __asm__ __volatile__ ( "ei" : : :"memory"); + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + !(flags & (1<<5)); \ +}) + +/* For spinlocks etc */ +#define local_irq_save(x) __asm__ __volatile__ ("move $ccr,%0\n\tdi" : "=rm" (x) : : "memory"); + +#endif diff --git a/arch/cris/include/arch-v10/arch/thread_info.h b/arch/cris/include/arch-v10/arch/thread_info.h new file mode 100644 index 000000000000..218f4152d3e5 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/thread_info.h @@ -0,0 +1,12 @@ +#ifndef _ASM_ARCH_THREAD_INFO_H +#define _ASM_ARCH_THREAD_INFO_H + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + __asm__("and.d $sp,%0; ":"=r" (ti) : "0" (~8191UL)); + return ti; +} + +#endif diff --git a/arch/cris/include/arch-v10/arch/timex.h b/arch/cris/include/arch-v10/arch/timex.h new file mode 100644 index 000000000000..e48447d94faf --- /dev/null +++ b/arch/cris/include/arch-v10/arch/timex.h @@ -0,0 +1,30 @@ +/* + * Use prescale timer at 25000 Hz instead of the baudrate timer at + * 19200 to get rid of the 64ppm to fast timer (and we get better + * resolution within a jiffie as well. + */ +#ifndef _ASM_CRIS_ARCH_TIMEX_H +#define _ASM_CRIS_ARCH_TIMEX_H + +/* The prescaler clock runs at 25MHz, we divide it by 1000 in the prescaler */ +/* If you change anything here you must check time.c as well... */ +#define PRESCALE_FREQ 25000000 +#define PRESCALE_VALUE 1000 +#define CLOCK_TICK_RATE 25000 /* Underlying frequency of the HZ timer */ +/* The timer0 values gives 40us resolution (1/25000) but interrupts at HZ*/ +#define TIMER0_FREQ (CLOCK_TICK_RATE) +#define TIMER0_CLKSEL flexible +#define TIMER0_DIV (TIMER0_FREQ/(HZ)) + + +#define GET_JIFFIES_USEC() \ + ( (TIMER0_DIV - *R_TIMER0_DATA) * (1000000/HZ)/TIMER0_DIV ) + +unsigned long get_ns_in_jiffie(void); + +static inline unsigned long get_us_in_jiffie_highres(void) +{ + return get_ns_in_jiffie()/1000; +} + +#endif diff --git a/arch/cris/include/arch-v10/arch/tlb.h b/arch/cris/include/arch-v10/arch/tlb.h new file mode 100644 index 000000000000..31525bbe75c3 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/tlb.h @@ -0,0 +1,13 @@ +#ifndef _CRIS_ARCH_TLB_H +#define _CRIS_ARCH_TLB_H + +/* The TLB can host up to 64 different mm contexts at the same time. + * The last page_id is never running - it is used as an invalid page_id + * so we can make TLB entries that will never match. + */ +#define NUM_TLB_ENTRIES 64 +#define NUM_PAGEID 64 +#define INVALID_PAGEID 63 +#define NO_CONTEXT -1 + +#endif diff --git a/arch/cris/include/arch-v10/arch/uaccess.h b/arch/cris/include/arch-v10/arch/uaccess.h new file mode 100644 index 000000000000..65b02d9b605a --- /dev/null +++ b/arch/cris/include/arch-v10/arch/uaccess.h @@ -0,0 +1,660 @@ +/* + * Authors: Bjorn Wesen (bjornw@axis.com) + * Hans-Peter Nilsson (hp@axis.com) + * + */ +#ifndef _CRIS_ARCH_UACCESS_H +#define _CRIS_ARCH_UACCESS_H + +/* + * We don't tell gcc that we are accessing memory, but this is OK + * because we do not write to any memory gcc knows about, so there + * are no aliasing issues. + * + * Note that PC at a fault is the address *after* the faulting + * instruction. + */ +#define __put_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + " "op" %1,[%2]\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + "3: move.d %3,%0\n" \ + " jump 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .dword 2b,3b\n" \ + " .previous\n" \ + : "=r" (err) \ + : "r" (x), "r" (addr), "g" (-EFAULT), "0" (err)) + +#define __put_user_asm_64(x, addr, err) \ + __asm__ __volatile__( \ + " move.d %M1,[%2]\n" \ + "2: move.d %H1,[%2+4]\n" \ + "4:\n" \ + " .section .fixup,\"ax\"\n" \ + "3: move.d %3,%0\n" \ + " jump 4b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .dword 2b,3b\n" \ + " .dword 4b,3b\n" \ + " .previous\n" \ + : "=r" (err) \ + : "r" (x), "r" (addr), "g" (-EFAULT), "0" (err)) + +/* See comment before __put_user_asm. */ + +#define __get_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + " "op" [%2],%1\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + "3: move.d %3,%0\n" \ + " moveq 0,%1\n" \ + " jump 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .dword 2b,3b\n" \ + " .previous\n" \ + : "=r" (err), "=r" (x) \ + : "r" (addr), "g" (-EFAULT), "0" (err)) + +#define __get_user_asm_64(x, addr, err) \ + __asm__ __volatile__( \ + " move.d [%2],%M1\n" \ + "2: move.d [%2+4],%H1\n" \ + "4:\n" \ + " .section .fixup,\"ax\"\n" \ + "3: move.d %3,%0\n" \ + " moveq 0,%1\n" \ + " jump 4b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .dword 2b,3b\n" \ + " .dword 4b,3b\n" \ + " .previous\n" \ + : "=r" (err), "=r" (x) \ + : "r" (addr), "g" (-EFAULT), "0" (err)) + +/* + * Copy a null terminated string from userspace. + * + * Must return: + * -EFAULT for an exception + * count if we hit the buffer limit + * bytes copied if we hit a null byte + * (without the null byte) + */ +static inline long +__do_strncpy_from_user(char *dst, const char *src, long count) +{ + long res; + + if (count == 0) + return 0; + + /* + * Currently, in 2.4.0-test9, most ports use a simple byte-copy loop. + * So do we. + * + * This code is deduced from: + * + * char tmp2; + * long tmp1, tmp3 + * tmp1 = count; + * while ((*dst++ = (tmp2 = *src++)) != 0 + * && --tmp1) + * ; + * + * res = count - tmp1; + * + * with tweaks. + */ + + __asm__ __volatile__ ( + " move.d %3,%0\n" + " move.b [%2+],$r9\n" + "1: beq 2f\n" + " move.b $r9,[%1+]\n" + + " subq 1,%0\n" + " bne 1b\n" + " move.b [%2+],$r9\n" + + "2: sub.d %3,%0\n" + " neg.d %0,%0\n" + "3:\n" + " .section .fixup,\"ax\"\n" + "4: move.d %7,%0\n" + " jump 3b\n" + + /* There's one address for a fault at the first move, and + two possible PC values for a fault at the second move, + being a delay-slot filler. However, the branch-target + for the second move is the same as the first address. + Just so you don't get confused... */ + " .previous\n" + " .section __ex_table,\"a\"\n" + " .dword 1b,4b\n" + " .dword 2b,4b\n" + " .previous" + : "=r" (res), "=r" (dst), "=r" (src), "=r" (count) + : "3" (count), "1" (dst), "2" (src), "g" (-EFAULT) + : "r9"); + + return res; +} + +/* A few copy asms to build up the more complex ones from. + + Note again, a post-increment is performed regardless of whether a bus + fault occurred in that instruction, and PC for a faulted insn is the + address *after* the insn. */ + +#define __asm_copy_user_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm__ __volatile__ ( \ + COPY \ + "1:\n" \ + " .section .fixup,\"ax\"\n" \ + FIXUP \ + " jump 1b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + TENTRY \ + " .previous\n" \ + : "=r" (to), "=r" (from), "=r" (ret) \ + : "0" (to), "1" (from), "2" (ret) \ + : "r9", "memory") + +#define __asm_copy_from_user_1(to, from, ret) \ + __asm_copy_user_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + "2: move.b $r9,[%0+]\n", \ + "3: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 2b,3b\n") + +#define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_user_cont(to, from, ret, \ + " move.w [%1+],$r9\n" \ + "2: move.w $r9,[%0+]\n" COPY, \ + "3: addq 2,%2\n" \ + " clear.w [%0+]\n" FIXUP, \ + " .dword 2b,3b\n" TENTRY) + +#define __asm_copy_from_user_2(to, from, ret) \ + __asm_copy_from_user_2x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_3(to, from, ret) \ + __asm_copy_from_user_2x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + "4: move.b $r9,[%0+]\n", \ + "5: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 4b,5b\n") + +#define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_user_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + "2: move.d $r9,[%0+]\n" COPY, \ + "3: addq 4,%2\n" \ + " clear.d [%0+]\n" FIXUP, \ + " .dword 2b,3b\n" TENTRY) + +#define __asm_copy_from_user_4(to, from, ret) \ + __asm_copy_from_user_4x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_5(to, from, ret) \ + __asm_copy_from_user_4x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + "4: move.b $r9,[%0+]\n", \ + "5: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 4b,5b\n") + +#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_4x_cont(to, from, ret, \ + " move.w [%1+],$r9\n" \ + "4: move.w $r9,[%0+]\n" COPY, \ + "5: addq 2,%2\n" \ + " clear.w [%0+]\n" FIXUP, \ + " .dword 4b,5b\n" TENTRY) + +#define __asm_copy_from_user_6(to, from, ret) \ + __asm_copy_from_user_6x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_7(to, from, ret) \ + __asm_copy_from_user_6x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + "6: move.b $r9,[%0+]\n", \ + "7: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 6b,7b\n") + +#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_4x_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + "4: move.d $r9,[%0+]\n" COPY, \ + "5: addq 4,%2\n" \ + " clear.d [%0+]\n" FIXUP, \ + " .dword 4b,5b\n" TENTRY) + +#define __asm_copy_from_user_8(to, from, ret) \ + __asm_copy_from_user_8x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_9(to, from, ret) \ + __asm_copy_from_user_8x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + "6: move.b $r9,[%0+]\n", \ + "7: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 6b,7b\n") + +#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_8x_cont(to, from, ret, \ + " move.w [%1+],$r9\n" \ + "6: move.w $r9,[%0+]\n" COPY, \ + "7: addq 2,%2\n" \ + " clear.w [%0+]\n" FIXUP, \ + " .dword 6b,7b\n" TENTRY) + +#define __asm_copy_from_user_10(to, from, ret) \ + __asm_copy_from_user_10x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_11(to, from, ret) \ + __asm_copy_from_user_10x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + "8: move.b $r9,[%0+]\n", \ + "9: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 8b,9b\n") + +#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_8x_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + "6: move.d $r9,[%0+]\n" COPY, \ + "7: addq 4,%2\n" \ + " clear.d [%0+]\n" FIXUP, \ + " .dword 6b,7b\n" TENTRY) + +#define __asm_copy_from_user_12(to, from, ret) \ + __asm_copy_from_user_12x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_13(to, from, ret) \ + __asm_copy_from_user_12x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + "8: move.b $r9,[%0+]\n", \ + "9: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 8b,9b\n") + +#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_12x_cont(to, from, ret, \ + " move.w [%1+],$r9\n" \ + "8: move.w $r9,[%0+]\n" COPY, \ + "9: addq 2,%2\n" \ + " clear.w [%0+]\n" FIXUP, \ + " .dword 8b,9b\n" TENTRY) + +#define __asm_copy_from_user_14(to, from, ret) \ + __asm_copy_from_user_14x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_15(to, from, ret) \ + __asm_copy_from_user_14x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + "10: move.b $r9,[%0+]\n", \ + "11: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 10b,11b\n") + +#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_12x_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + "8: move.d $r9,[%0+]\n" COPY, \ + "9: addq 4,%2\n" \ + " clear.d [%0+]\n" FIXUP, \ + " .dword 8b,9b\n" TENTRY) + +#define __asm_copy_from_user_16(to, from, ret) \ + __asm_copy_from_user_16x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_16x_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + "10: move.d $r9,[%0+]\n" COPY, \ + "11: addq 4,%2\n" \ + " clear.d [%0+]\n" FIXUP, \ + " .dword 10b,11b\n" TENTRY) + +#define __asm_copy_from_user_20(to, from, ret) \ + __asm_copy_from_user_20x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_20x_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + "12: move.d $r9,[%0+]\n" COPY, \ + "13: addq 4,%2\n" \ + " clear.d [%0+]\n" FIXUP, \ + " .dword 12b,13b\n" TENTRY) + +#define __asm_copy_from_user_24(to, from, ret) \ + __asm_copy_from_user_24x_cont(to, from, ret, "", "", "") + +/* And now, the to-user ones. */ + +#define __asm_copy_to_user_1(to, from, ret) \ + __asm_copy_user_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + " move.b $r9,[%0+]\n2:\n", \ + "3: addq 1,%2\n", \ + " .dword 2b,3b\n") + +#define __asm_copy_to_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_user_cont(to, from, ret, \ + " move.w [%1+],$r9\n" \ + " move.w $r9,[%0+]\n2:\n" COPY, \ + "3: addq 2,%2\n" FIXUP, \ + " .dword 2b,3b\n" TENTRY) + +#define __asm_copy_to_user_2(to, from, ret) \ + __asm_copy_to_user_2x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_3(to, from, ret) \ + __asm_copy_to_user_2x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + " move.b $r9,[%0+]\n4:\n", \ + "5: addq 1,%2\n", \ + " .dword 4b,5b\n") + +#define __asm_copy_to_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_user_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + " move.d $r9,[%0+]\n2:\n" COPY, \ + "3: addq 4,%2\n" FIXUP, \ + " .dword 2b,3b\n" TENTRY) + +#define __asm_copy_to_user_4(to, from, ret) \ + __asm_copy_to_user_4x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_5(to, from, ret) \ + __asm_copy_to_user_4x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + " move.b $r9,[%0+]\n4:\n", \ + "5: addq 1,%2\n", \ + " .dword 4b,5b\n") + +#define __asm_copy_to_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_4x_cont(to, from, ret, \ + " move.w [%1+],$r9\n" \ + " move.w $r9,[%0+]\n4:\n" COPY, \ + "5: addq 2,%2\n" FIXUP, \ + " .dword 4b,5b\n" TENTRY) + +#define __asm_copy_to_user_6(to, from, ret) \ + __asm_copy_to_user_6x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_7(to, from, ret) \ + __asm_copy_to_user_6x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + " move.b $r9,[%0+]\n6:\n", \ + "7: addq 1,%2\n", \ + " .dword 6b,7b\n") + +#define __asm_copy_to_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_4x_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + " move.d $r9,[%0+]\n4:\n" COPY, \ + "5: addq 4,%2\n" FIXUP, \ + " .dword 4b,5b\n" TENTRY) + +#define __asm_copy_to_user_8(to, from, ret) \ + __asm_copy_to_user_8x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_9(to, from, ret) \ + __asm_copy_to_user_8x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + " move.b $r9,[%0+]\n6:\n", \ + "7: addq 1,%2\n", \ + " .dword 6b,7b\n") + +#define __asm_copy_to_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_8x_cont(to, from, ret, \ + " move.w [%1+],$r9\n" \ + " move.w $r9,[%0+]\n6:\n" COPY, \ + "7: addq 2,%2\n" FIXUP, \ + " .dword 6b,7b\n" TENTRY) + +#define __asm_copy_to_user_10(to, from, ret) \ + __asm_copy_to_user_10x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_11(to, from, ret) \ + __asm_copy_to_user_10x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + " move.b $r9,[%0+]\n8:\n", \ + "9: addq 1,%2\n", \ + " .dword 8b,9b\n") + +#define __asm_copy_to_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_8x_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + " move.d $r9,[%0+]\n6:\n" COPY, \ + "7: addq 4,%2\n" FIXUP, \ + " .dword 6b,7b\n" TENTRY) + +#define __asm_copy_to_user_12(to, from, ret) \ + __asm_copy_to_user_12x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_13(to, from, ret) \ + __asm_copy_to_user_12x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + " move.b $r9,[%0+]\n8:\n", \ + "9: addq 1,%2\n", \ + " .dword 8b,9b\n") + +#define __asm_copy_to_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_12x_cont(to, from, ret, \ + " move.w [%1+],$r9\n" \ + " move.w $r9,[%0+]\n8:\n" COPY, \ + "9: addq 2,%2\n" FIXUP, \ + " .dword 8b,9b\n" TENTRY) + +#define __asm_copy_to_user_14(to, from, ret) \ + __asm_copy_to_user_14x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_15(to, from, ret) \ + __asm_copy_to_user_14x_cont(to, from, ret, \ + " move.b [%1+],$r9\n" \ + " move.b $r9,[%0+]\n10:\n", \ + "11: addq 1,%2\n", \ + " .dword 10b,11b\n") + +#define __asm_copy_to_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_12x_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + " move.d $r9,[%0+]\n8:\n" COPY, \ + "9: addq 4,%2\n" FIXUP, \ + " .dword 8b,9b\n" TENTRY) + +#define __asm_copy_to_user_16(to, from, ret) \ + __asm_copy_to_user_16x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_16x_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + " move.d $r9,[%0+]\n10:\n" COPY, \ + "11: addq 4,%2\n" FIXUP, \ + " .dword 10b,11b\n" TENTRY) + +#define __asm_copy_to_user_20(to, from, ret) \ + __asm_copy_to_user_20x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_20x_cont(to, from, ret, \ + " move.d [%1+],$r9\n" \ + " move.d $r9,[%0+]\n12:\n" COPY, \ + "13: addq 4,%2\n" FIXUP, \ + " .dword 12b,13b\n" TENTRY) + +#define __asm_copy_to_user_24(to, from, ret) \ + __asm_copy_to_user_24x_cont(to, from, ret, "", "", "") + +/* Define a few clearing asms with exception handlers. */ + +/* This frame-asm is like the __asm_copy_user_cont one, but has one less + input. */ + +#define __asm_clear(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm__ __volatile__ ( \ + CLEAR \ + "1:\n" \ + " .section .fixup,\"ax\"\n" \ + FIXUP \ + " jump 1b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + TENTRY \ + " .previous" \ + : "=r" (to), "=r" (ret) \ + : "0" (to), "1" (ret) \ + : "memory") + +#define __asm_clear_1(to, ret) \ + __asm_clear(to, ret, \ + " clear.b [%0+]\n2:\n", \ + "3: addq 1,%1\n", \ + " .dword 2b,3b\n") + +#define __asm_clear_2(to, ret) \ + __asm_clear(to, ret, \ + " clear.w [%0+]\n2:\n", \ + "3: addq 2,%1\n", \ + " .dword 2b,3b\n") + +#define __asm_clear_3(to, ret) \ + __asm_clear(to, ret, \ + " clear.w [%0+]\n" \ + "2: clear.b [%0+]\n3:\n", \ + "4: addq 2,%1\n" \ + "5: addq 1,%1\n", \ + " .dword 2b,4b\n" \ + " .dword 3b,5b\n") + +#define __asm_clear_4x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear(to, ret, \ + " clear.d [%0+]\n2:\n" CLEAR, \ + "3: addq 4,%1\n" FIXUP, \ + " .dword 2b,3b\n" TENTRY) + +#define __asm_clear_4(to, ret) \ + __asm_clear_4x_cont(to, ret, "", "", "") + +#define __asm_clear_8x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear_4x_cont(to, ret, \ + " clear.d [%0+]\n4:\n" CLEAR, \ + "5: addq 4,%1\n" FIXUP, \ + " .dword 4b,5b\n" TENTRY) + +#define __asm_clear_8(to, ret) \ + __asm_clear_8x_cont(to, ret, "", "", "") + +#define __asm_clear_12x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear_8x_cont(to, ret, \ + " clear.d [%0+]\n6:\n" CLEAR, \ + "7: addq 4,%1\n" FIXUP, \ + " .dword 6b,7b\n" TENTRY) + +#define __asm_clear_12(to, ret) \ + __asm_clear_12x_cont(to, ret, "", "", "") + +#define __asm_clear_16x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear_12x_cont(to, ret, \ + " clear.d [%0+]\n8:\n" CLEAR, \ + "9: addq 4,%1\n" FIXUP, \ + " .dword 8b,9b\n" TENTRY) + +#define __asm_clear_16(to, ret) \ + __asm_clear_16x_cont(to, ret, "", "", "") + +#define __asm_clear_20x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear_16x_cont(to, ret, \ + " clear.d [%0+]\n10:\n" CLEAR, \ + "11: addq 4,%1\n" FIXUP, \ + " .dword 10b,11b\n" TENTRY) + +#define __asm_clear_20(to, ret) \ + __asm_clear_20x_cont(to, ret, "", "", "") + +#define __asm_clear_24x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear_20x_cont(to, ret, \ + " clear.d [%0+]\n12:\n" CLEAR, \ + "13: addq 4,%1\n" FIXUP, \ + " .dword 12b,13b\n" TENTRY) + +#define __asm_clear_24(to, ret) \ + __asm_clear_24x_cont(to, ret, "", "", "") + +/* + * Return the size of a string (including the ending 0) + * + * Return length of string in userspace including terminating 0 + * or 0 for error. Return a value greater than N if too long. + */ + +static inline long +strnlen_user(const char *s, long n) +{ + long res, tmp1; + + if (!access_ok(VERIFY_READ, s, 0)) + return 0; + + /* + * This code is deduced from: + * + * tmp1 = n; + * while (tmp1-- > 0 && *s++) + * ; + * + * res = n - tmp1; + * + * (with tweaks). + */ + + __asm__ __volatile__ ( + " move.d %1,$r9\n" + "0:\n" + " ble 1f\n" + " subq 1,$r9\n" + + " test.b [%0+]\n" + " bne 0b\n" + " test.d $r9\n" + "1:\n" + " move.d %1,%0\n" + " sub.d $r9,%0\n" + "2:\n" + " .section .fixup,\"ax\"\n" + + "3: clear.d %0\n" + " jump 2b\n" + + /* There's one address for a fault at the first move, and + two possible PC values for a fault at the second move, + being a delay-slot filler. However, the branch-target + for the second move is the same as the first address. + Just so you don't get confused... */ + " .previous\n" + " .section __ex_table,\"a\"\n" + " .dword 0b,3b\n" + " .dword 1b,3b\n" + " .previous\n" + : "=r" (res), "=r" (tmp1) + : "0" (s), "1" (n) + : "r9"); + + return res; +} + +#endif diff --git a/arch/cris/include/arch-v10/arch/unistd.h b/arch/cris/include/arch-v10/arch/unistd.h new file mode 100644 index 000000000000..d1a38b9e6264 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/unistd.h @@ -0,0 +1,148 @@ +#ifndef _ASM_CRIS_ARCH_UNISTD_H_ +#define _ASM_CRIS_ARCH_UNISTD_H_ + +/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */ +/* + * Don't remove the .ifnc tests; they are an insurance against + * any hard-to-spot gcc register allocation bugs. + */ +#define _syscall0(type,name) \ +type name(void) \ +{ \ + register long __a __asm__ ("r10"); \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1,$r10$r9\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_)); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall1(type,name,type1,arg1) \ +type name(type1 arg1) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1,$r10$r9\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a)); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall2(type,name,type1,arg1,type2,arg2) \ +type name(type1 arg1,type2 arg2) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __b __asm__ ("r11") = (long) arg2; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1%3,$r10$r9$r11\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b)); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \ +type name(type1 arg1,type2 arg2,type3 arg3) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __b __asm__ ("r11") = (long) arg2; \ + register long __c __asm__ ("r12") = (long) arg3; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1%3%4,$r10$r9$r11$r12\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), "r" (__c)); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ +type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __b __asm__ ("r11") = (long) arg2; \ + register long __c __asm__ ("r12") = (long) arg3; \ + register long __d __asm__ ("r13") = (long) arg4; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), \ + "r" (__c), "r" (__d)); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ + type5,arg5) \ +type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __b __asm__ ("r11") = (long) arg2; \ + register long __c __asm__ ("r12") = (long) arg3; \ + register long __d __asm__ ("r13") = (long) arg4; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "move %6,$mof\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), \ + "r" (__c), "r" (__d), "g" (arg5)); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ + type5,arg5,type6,arg6) \ +type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __b __asm__ ("r11") = (long) arg2; \ + register long __c __asm__ ("r12") = (long) arg3; \ + register long __d __asm__ ("r13") = (long) arg4; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "move %6,$mof\n\tmove %7,$srp\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), \ + "r" (__c), "r" (__d), "g" (arg5), "g" (arg6)\ + : "srp"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#endif diff --git a/arch/cris/include/arch-v10/arch/user.h b/arch/cris/include/arch-v10/arch/user.h new file mode 100644 index 000000000000..9303ea77c915 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/user.h @@ -0,0 +1,46 @@ +#ifndef __ASM_CRIS_ARCH_USER_H +#define __ASM_CRIS_ARCH_USER_H + +/* User mode registers, used for core dumps. In order to keep ELF_NGREG + sensible we let all registers be 32 bits. The csr registers are included + for future use. */ +struct user_regs_struct { + unsigned long r0; /* General registers. */ + unsigned long r1; + unsigned long r2; + unsigned long r3; + unsigned long r4; + unsigned long r5; + unsigned long r6; + unsigned long r7; + unsigned long r8; + unsigned long r9; + unsigned long r10; + unsigned long r11; + unsigned long r12; + unsigned long r13; + unsigned long sp; /* Stack pointer. */ + unsigned long pc; /* Program counter. */ + unsigned long p0; /* Constant zero (only 8 bits). */ + unsigned long vr; /* Version register (only 8 bits). */ + unsigned long p2; /* Reserved. */ + unsigned long p3; /* Reserved. */ + unsigned long p4; /* Constant zero (only 16 bits). */ + unsigned long ccr; /* Condition code register (only 16 bits). */ + unsigned long p6; /* Reserved. */ + unsigned long mof; /* Multiply overflow register. */ + unsigned long p8; /* Constant zero. */ + unsigned long ibr; /* Not accessible. */ + unsigned long irp; /* Not accessible. */ + unsigned long srp; /* Subroutine return pointer. */ + unsigned long bar; /* Not accessible. */ + unsigned long dccr; /* Dword condition code register. */ + unsigned long brp; /* Not accessible. */ + unsigned long usp; /* User-mode stack pointer. Same as sp when + in user mode. */ + unsigned long csrinstr; /* Internal status registers. */ + unsigned long csraddr; + unsigned long csrdata; +}; + +#endif diff --git a/arch/cris/include/arch-v32/arch/Kbuild b/arch/cris/include/arch-v32/arch/Kbuild new file mode 100644 index 000000000000..35f2fc4f993e --- /dev/null +++ b/arch/cris/include/arch-v32/arch/Kbuild @@ -0,0 +1,2 @@ +header-y += user.h +header-y += cryptocop.h diff --git a/arch/cris/include/arch-v32/arch/atomic.h b/arch/cris/include/arch-v32/arch/atomic.h new file mode 100644 index 000000000000..852ceff8013f --- /dev/null +++ b/arch/cris/include/arch-v32/arch/atomic.h @@ -0,0 +1,36 @@ +#ifndef __ASM_CRIS_ARCH_ATOMIC__ +#define __ASM_CRIS_ARCH_ATOMIC__ + +#include + +extern void cris_spin_unlock(void *l, int val); +extern void cris_spin_lock(void *l); +extern int cris_spin_trylock(void* l); + +#ifndef CONFIG_SMP +#define cris_atomic_save(addr, flags) local_irq_save(flags); +#define cris_atomic_restore(addr, flags) local_irq_restore(flags); +#else + +extern spinlock_t cris_atomic_locks[]; +#define LOCK_COUNT 128 +#define HASH_ADDR(a) (((int)a) & 127) + +#define cris_atomic_save(addr, flags) \ + local_irq_save(flags); \ + cris_spin_lock((void *)&cris_atomic_locks[HASH_ADDR(addr)].raw_lock.slock); + +#define cris_atomic_restore(addr, flags) \ + { \ + spinlock_t *lock = (void*)&cris_atomic_locks[HASH_ADDR(addr)]; \ + __asm__ volatile ("move.d %1,%0" \ + : "=m" (lock->raw_lock.slock) \ + : "r" (1) \ + : "memory"); \ + local_irq_restore(flags); \ + } + +#endif + +#endif + diff --git a/arch/cris/include/arch-v32/arch/bitops.h b/arch/cris/include/arch-v32/arch/bitops.h new file mode 100644 index 000000000000..147689d6b624 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/bitops.h @@ -0,0 +1,64 @@ +#ifndef _ASM_CRIS_ARCH_BITOPS_H +#define _ASM_CRIS_ARCH_BITOPS_H + +/* + * Helper functions for the core of the ff[sz] functions. They compute the + * number of leading zeroes of a bits-in-byte, byte-in-word and + * word-in-dword-swapped number. They differ in that the first function also + * inverts all bits in the input. + */ + +static inline unsigned long +cris_swapnwbrlz(unsigned long w) +{ + unsigned long res; + + __asm__ __volatile__ ("swapnwbr %0\n\t" + "lz %0,%0" + : "=r" (res) : "0" (w)); + + return res; +} + +static inline unsigned long +cris_swapwbrlz(unsigned long w) +{ + unsigned long res; + + __asm__ __volatile__ ("swapwbr %0\n\t" + "lz %0,%0" + : "=r" (res) : "0" (w)); + + return res; +} + +/* + * Find First Zero in word. Undefined if no zero exist, so the caller should + * check against ~0 first. + */ +static inline unsigned long +ffz(unsigned long w) +{ + return cris_swapnwbrlz(w); +} + +/* + * Find First Set bit in word. Undefined if no 1 exist, so the caller + * should check against 0 first. + */ +static inline unsigned long +__ffs(unsigned long w) +{ + return cris_swapnwbrlz(~w); +} + +/* + * Find First Bit that is set. + */ +static inline unsigned long +kernel_ffs(unsigned long w) +{ + return w ? cris_swapwbrlz (w) + 1 : 0; +} + +#endif /* _ASM_CRIS_ARCH_BITOPS_H */ diff --git a/arch/cris/include/arch-v32/arch/bug.h b/arch/cris/include/arch-v32/arch/bug.h new file mode 100644 index 000000000000..0f211e135248 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/bug.h @@ -0,0 +1,33 @@ +#ifndef __ASM_CRISv32_ARCH_BUG_H +#define __ASM_CRISv32_ARCH_BUG_H + +#include + +#ifdef CONFIG_BUG +#ifdef CONFIG_DEBUG_BUGVERBOSE +/* + * The penalty for the in-band code path will be the size of break 14. + * All other stuff is done out-of-band with exception handlers. + */ +#define BUG() \ + __asm__ __volatile__ ("0: break 14\n\t" \ + ".section .fixup,\"ax\"\n" \ + "1:\n\t" \ + "move.d %0, $r10\n\t" \ + "move.d %1, $r11\n\t" \ + "jump do_BUG\n\t" \ + "nop\n\t" \ + ".previous\n\t" \ + ".section __ex_table,\"a\"\n\t" \ + ".dword 0b, 1b\n\t" \ + ".previous\n\t" \ + : : "ri" (__FILE__), "i" (__LINE__)) +#else +#define BUG() __asm__ __volatile__ ("break 14\n\t") +#endif + +#define HAVE_ARCH_BUG +#endif + +#include +#endif diff --git a/arch/cris/include/arch-v32/arch/byteorder.h b/arch/cris/include/arch-v32/arch/byteorder.h new file mode 100644 index 000000000000..6ef8fb4a35f2 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/byteorder.h @@ -0,0 +1,20 @@ +#ifndef _ASM_CRIS_ARCH_BYTEORDER_H +#define _ASM_CRIS_ARCH_BYTEORDER_H + +#include + +static inline __const__ __u32 +___arch__swab32(__u32 x) +{ + __asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x)); + return (x); +} + +static inline __const__ __u16 +___arch__swab16(__u16 x) +{ + __asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x)); + return (x); +} + +#endif /* _ASM_CRIS_ARCH_BYTEORDER_H */ diff --git a/arch/cris/include/arch-v32/arch/cache.h b/arch/cris/include/arch-v32/arch/cache.h new file mode 100644 index 000000000000..dfc73050e6b4 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/cache.h @@ -0,0 +1,19 @@ +#ifndef _ASM_CRIS_ARCH_CACHE_H +#define _ASM_CRIS_ARCH_CACHE_H + +#include + +/* A cache-line is 32 bytes. */ +#define L1_CACHE_BYTES 32 +#define L1_CACHE_SHIFT 5 + +void flush_dma_list(dma_descr_data *descr); +void flush_dma_descr(dma_descr_data *descr, int flush_buf); + +#define flush_dma_context(c) \ + flush_dma_list(phys_to_virt((c)->saved_data)); + +void cris_flush_cache_range(void *buf, unsigned long len); +void cris_flush_cache(void); + +#endif /* _ASM_CRIS_ARCH_CACHE_H */ diff --git a/arch/cris/include/arch-v32/arch/checksum.h b/arch/cris/include/arch-v32/arch/checksum.h new file mode 100644 index 000000000000..e5dcfce6e0dc --- /dev/null +++ b/arch/cris/include/arch-v32/arch/checksum.h @@ -0,0 +1,29 @@ +#ifndef _ASM_CRIS_ARCH_CHECKSUM_H +#define _ASM_CRIS_ARCH_CHECKSUM_H + +/* + * Check values used in TCP/UDP headers. + * + * The gain of doing this in assembler instead of C, is that C doesn't + * generate carry-additions for the 32-bit components of the + * checksum. Which means it would be necessary to split all those into + * 16-bit components and then add. + */ +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, unsigned short proto, __wsum sum) +{ + __wsum res; + + __asm__ __volatile__ ("add.d %2, %0\n\t" + "addc %3, %0\n\t" + "addc %4, %0\n\t" + "addc 0, %0\n\t" + : "=r" (res) + : "0" (sum), "r" (daddr), "r" (saddr), \ + "r" ((len + proto) << 8)); + + return res; +} + +#endif /* _ASM_CRIS_ARCH_CHECKSUM_H */ diff --git a/arch/cris/include/arch-v32/arch/cryptocop.h b/arch/cris/include/arch-v32/arch/cryptocop.h new file mode 100644 index 000000000000..e1cd83dfabb5 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/cryptocop.h @@ -0,0 +1,272 @@ +/* + * The device /dev/cryptocop is accessible using this driver using + * CRYPTOCOP_MAJOR (254) and minor number 0. + */ + +#ifndef CRYPTOCOP_H +#define CRYPTOCOP_H + +#include + + +#define CRYPTOCOP_SESSION_ID_NONE (0) + +typedef unsigned long long int cryptocop_session_id; + +/* cryptocop ioctls */ +#define ETRAXCRYPTOCOP_IOCTYPE (250) + +#define CRYPTOCOP_IO_CREATE_SESSION _IOWR(ETRAXCRYPTOCOP_IOCTYPE, 1, struct strcop_session_op) +#define CRYPTOCOP_IO_CLOSE_SESSION _IOW(ETRAXCRYPTOCOP_IOCTYPE, 2, struct strcop_session_op) +#define CRYPTOCOP_IO_PROCESS_OP _IOWR(ETRAXCRYPTOCOP_IOCTYPE, 3, struct strcop_crypto_op) +#define CRYPTOCOP_IO_MAXNR (3) + +typedef enum { + cryptocop_cipher_des = 0, + cryptocop_cipher_3des = 1, + cryptocop_cipher_aes = 2, + cryptocop_cipher_m2m = 3, /* mem2mem is essentially a NULL cipher with blocklength=1 */ + cryptocop_cipher_none +} cryptocop_cipher_type; + +typedef enum { + cryptocop_digest_sha1 = 0, + cryptocop_digest_md5 = 1, + cryptocop_digest_none +} cryptocop_digest_type; + +typedef enum { + cryptocop_csum_le = 0, + cryptocop_csum_be = 1, + cryptocop_csum_none +} cryptocop_csum_type; + +typedef enum { + cryptocop_cipher_mode_ecb = 0, + cryptocop_cipher_mode_cbc, + cryptocop_cipher_mode_none +} cryptocop_cipher_mode; + +typedef enum { + cryptocop_3des_eee = 0, + cryptocop_3des_eed = 1, + cryptocop_3des_ede = 2, + cryptocop_3des_edd = 3, + cryptocop_3des_dee = 4, + cryptocop_3des_ded = 5, + cryptocop_3des_dde = 6, + cryptocop_3des_ddd = 7 +} cryptocop_3des_mode; + +/* Usermode accessible (ioctl) operations. */ +struct strcop_session_op{ + cryptocop_session_id ses_id; + + cryptocop_cipher_type cipher; /* AES, DES, 3DES, m2m, none */ + + cryptocop_cipher_mode cmode; /* ECB, CBC, none */ + cryptocop_3des_mode des3_mode; + + cryptocop_digest_type digest; /* MD5, SHA1, none */ + + cryptocop_csum_type csum; /* BE, LE, none */ + + unsigned char *key; + size_t keylen; +}; + +#define CRYPTOCOP_CSUM_LENGTH (2) +#define CRYPTOCOP_MAX_DIGEST_LENGTH (20) /* SHA-1 20, MD5 16 */ +#define CRYPTOCOP_MAX_IV_LENGTH (16) /* (3)DES==8, AES == 16 */ +#define CRYPTOCOP_MAX_KEY_LENGTH (32) + +struct strcop_crypto_op{ + cryptocop_session_id ses_id; + + /* Indata. */ + unsigned char *indata; + size_t inlen; /* Total indata length. */ + + /* Cipher configuration. */ + unsigned char do_cipher:1; + unsigned char decrypt:1; /* 1 == decrypt, 0 == encrypt */ + unsigned char cipher_explicit:1; + size_t cipher_start; + size_t cipher_len; + /* cipher_iv is used if do_cipher and cipher_explicit and the cipher + mode is CBC. The length is controlled by the type of cipher, + e.g. DES/3DES 8 octets and AES 16 octets. */ + unsigned char cipher_iv[CRYPTOCOP_MAX_IV_LENGTH]; + /* Outdata. */ + unsigned char *cipher_outdata; + size_t cipher_outlen; + + /* digest configuration. */ + unsigned char do_digest:1; + size_t digest_start; + size_t digest_len; + /* Outdata. The actual length is determined by the type of the digest. */ + unsigned char digest[CRYPTOCOP_MAX_DIGEST_LENGTH]; + + /* Checksum configuration. */ + unsigned char do_csum:1; + size_t csum_start; + size_t csum_len; + /* Outdata. */ + unsigned char csum[CRYPTOCOP_CSUM_LENGTH]; +}; + + + +#ifdef __KERNEL__ + +/********** The API to use from inside the kernel. ************/ + +#include + +typedef enum { + cryptocop_alg_csum = 0, + cryptocop_alg_mem2mem, + cryptocop_alg_md5, + cryptocop_alg_sha1, + cryptocop_alg_des, + cryptocop_alg_3des, + cryptocop_alg_aes, + cryptocop_no_alg, +} cryptocop_algorithm; + +typedef u8 cryptocop_tfrm_id; + + +struct cryptocop_operation; + +typedef void (cryptocop_callback)(struct cryptocop_operation*, void*); + +struct cryptocop_transform_init { + cryptocop_algorithm alg; + /* Keydata for ciphers. */ + unsigned char key[CRYPTOCOP_MAX_KEY_LENGTH]; + unsigned int keylen; + cryptocop_cipher_mode cipher_mode; + cryptocop_3des_mode tdes_mode; + cryptocop_csum_type csum_mode; /* cryptocop_csum_none is not allowed when alg==cryptocop_alg_csum */ + + cryptocop_tfrm_id tid; /* Locally unique in session; assigned by user, checked by driver. */ + struct cryptocop_transform_init *next; +}; + + +typedef enum { + cryptocop_source_dma = 0, + cryptocop_source_des, + cryptocop_source_3des, + cryptocop_source_aes, + cryptocop_source_md5, + cryptocop_source_sha1, + cryptocop_source_csum, + cryptocop_source_none, +} cryptocop_source; + + +struct cryptocop_desc_cfg { + cryptocop_tfrm_id tid; + cryptocop_source src; + unsigned int last:1; /* Last use of this transform in the operation. Will push outdata when encountered. */ + struct cryptocop_desc_cfg *next; +}; + +struct cryptocop_desc { + size_t length; + struct cryptocop_desc_cfg *cfg; + struct cryptocop_desc *next; +}; + + +/* Flags for cryptocop_tfrm_cfg */ +#define CRYPTOCOP_NO_FLAG (0x00) +#define CRYPTOCOP_ENCRYPT (0x01) +#define CRYPTOCOP_DECRYPT (0x02) +#define CRYPTOCOP_EXPLICIT_IV (0x04) + +struct cryptocop_tfrm_cfg { + cryptocop_tfrm_id tid; + + unsigned int flags; /* DECRYPT, ENCRYPT, EXPLICIT_IV */ + + /* CBC initialisation vector for cihers. */ + u8 iv[CRYPTOCOP_MAX_IV_LENGTH]; + + /* The position in output where to write the transform output. The order + in which the driver writes the output is unspecified, hence if several + transforms write on the same positions in the output the result is + unspecified. */ + size_t inject_ix; + + struct cryptocop_tfrm_cfg *next; +}; + + + +struct cryptocop_dma_list_operation{ + /* The consumer can provide DMA lists to send to the co-processor. 'use_dmalists' in + struct cryptocop_operation must be set for the driver to use them. outlist, + out_data_buf, inlist and in_data_buf must all be physical addresses since they will + be loaded to DMA . */ + dma_descr_data *outlist; /* Out from memory to the co-processor. */ + char *out_data_buf; + dma_descr_data *inlist; /* In from the co-processor to memory. */ + char *in_data_buf; + + cryptocop_3des_mode tdes_mode; + cryptocop_csum_type csum_mode; +}; + + +struct cryptocop_tfrm_operation{ + /* Operation configuration, if not 'use_dmalists' is set. */ + struct cryptocop_tfrm_cfg *tfrm_cfg; + struct cryptocop_desc *desc; + + struct iovec *indata; + size_t incount; + size_t inlen; /* Total inlength. */ + + struct iovec *outdata; + size_t outcount; + size_t outlen; /* Total outlength. */ +}; + + +struct cryptocop_operation { + cryptocop_callback *cb; + void *cb_data; + + cryptocop_session_id sid; + + /* The status of the operation when returned to consumer. */ + int operation_status; /* 0, -EAGAIN */ + + /* Flags */ + unsigned int use_dmalists:1; /* Use outlist and inlist instead of the desc/tfrm_cfg configuration. */ + unsigned int in_interrupt:1; /* Set if inserting job from interrupt context. */ + unsigned int fast_callback:1; /* Set if fast callback wanted, i.e. from interrupt context. */ + + union{ + struct cryptocop_dma_list_operation list_op; + struct cryptocop_tfrm_operation tfrm_op; + }; +}; + + +int cryptocop_new_session(cryptocop_session_id *sid, struct cryptocop_transform_init *tinit, int alloc_flag); +int cryptocop_free_session(cryptocop_session_id sid); + +int cryptocop_job_queue_insert_csum(struct cryptocop_operation *operation); + +int cryptocop_job_queue_insert_crypto(struct cryptocop_operation *operation); + +int cryptocop_job_queue_insert_user_job(struct cryptocop_operation *operation); + +#endif /* __KERNEL__ */ + +#endif /* CRYPTOCOP_H */ diff --git a/arch/cris/include/arch-v32/arch/delay.h b/arch/cris/include/arch-v32/arch/delay.h new file mode 100644 index 000000000000..e9fda03810a9 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/delay.h @@ -0,0 +1,28 @@ +#ifndef _ASM_CRIS_ARCH_DELAY_H +#define _ASM_CRIS_ARCH_DELAY_H + +extern void cris_delay10ns(u32 n10ns); +#define udelay(u) cris_delay10ns((u)*100) +#define ndelay(n) cris_delay10ns(((n)+9)/10) + +/* + * Not used anymore for udelay or ndelay. Referenced by + * e.g. init/calibrate.c. All other references are likely bugs; + * should be replaced by mdelay, udelay or ndelay. + */ + +static inline void +__delay(int loops) +{ + __asm__ __volatile__ ( + "move.d %0, $r9\n\t" + "beq 2f\n\t" + "subq 1, $r9\n\t" + "1:\n\t" + "bne 1b\n\t" + "subq 1, $r9\n" + "2:" + : : "g" (loops) : "r9"); +} + +#endif /* _ASM_CRIS_ARCH_DELAY_H */ diff --git a/arch/cris/include/arch-v32/arch/dma.h b/arch/cris/include/arch-v32/arch/dma.h new file mode 100644 index 000000000000..3674081389fd --- /dev/null +++ b/arch/cris/include/arch-v32/arch/dma.h @@ -0,0 +1,79 @@ +#ifndef _ASM_ARCH_CRIS_DMA_H +#define _ASM_ARCH_CRIS_DMA_H + +/* Defines for using and allocating dma channels. */ + +#define MAX_DMA_CHANNELS 10 + +#define NETWORK_ETH0_TX_DMA_NBR 0 /* Ethernet 0 out. */ +#define NETWORK_ETH0 RX_DMA_NBR 1 /* Ethernet 0 in. */ + +#define IO_PROC_DMA0_TX_DMA_NBR 2 /* IO processor DMA0 out. */ +#define IO_PROC_DMA0_RX_DMA_NBR 3 /* IO processor DMA0 in. */ + +#define ATA_TX_DMA_NBR 2 /* ATA interface out. */ +#define ATA_RX_DMA_NBR 3 /* ATA interface in. */ + +#define ASYNC_SER2_TX_DMA_NBR 2 /* Asynchronous serial port 2 out. */ +#define ASYNC_SER2_RX_DMA_NBR 3 /* Asynchronous serial port 2 in. */ + +#define IO_PROC_DMA1_TX_DMA_NBR 4 /* IO processor DMA1 out. */ +#define IO_PROC_DMA1_RX_DMA_NBR 5 /* IO processor DMA1 in. */ + +#define ASYNC_SER1_TX_DMA_NBR 4 /* Asynchronous serial port 1 out. */ +#define ASYNC_SER1_RX_DMA_NBR 5 /* Asynchronous serial port 1 in. */ + +#define SYNC_SER0_TX_DMA_NBR 4 /* Synchronous serial port 0 out. */ +#define SYNC_SER0_RX_DMA_NBR 5 /* Synchronous serial port 0 in. */ + +#define EXTDMA0_TX_DMA_NBR 6 /* External DMA 0 out. */ +#define EXTDMA1_RX_DMA_NBR 7 /* External DMA 1 in. */ + +#define ASYNC_SER0_TX_DMA_NBR 6 /* Asynchronous serial port 0 out. */ +#define ASYNC_SER0_RX_DMA_NBR 7 /* Asynchronous serial port 0 in. */ + +#define SYNC_SER1_TX_DMA_NBR 6 /* Synchronous serial port 1 out. */ +#define SYNC_SER1_RX_DMA_NBR 7 /* Synchronous serial port 1 in. */ + +#define NETWORK_ETH1_TX_DMA_NBR 6 /* Ethernet 1 out. */ +#define NETWORK_ETH1_RX_DMA_NBR 7 /* Ethernet 1 in. */ + +#define EXTDMA2_TX_DMA_NBR 8 /* External DMA 2 out. */ +#define EXTDMA3_RX_DMA_NBR 9 /* External DMA 3 in. */ + +#define STRCOP_TX_DMA_NBR 8 /* Stream co-processor out. */ +#define STRCOP_RX_DMA_NBR 9 /* Stream co-processor in. */ + +#define ASYNC_SER3_TX_DMA_NBR 8 /* Asynchronous serial port 3 out. */ +#define ASYNC_SER3_RX_DMA_NBR 9 /* Asynchronous serial port 3 in. */ + +enum dma_owner +{ + dma_eth0, + dma_eth1, + dma_iop0, + dma_iop1, + dma_ser0, + dma_ser1, + dma_ser2, + dma_ser3, + dma_sser0, + dma_sser1, + dma_ata, + dma_strp, + dma_ext0, + dma_ext1, + dma_ext2, + dma_ext3 +}; + +int crisv32_request_dma(unsigned int dmanr, const char * device_id, + unsigned options, unsigned bandwidth, enum dma_owner owner); +void crisv32_free_dma(unsigned int dmanr); + +/* Masks used by crisv32_request_dma options: */ +#define DMA_VERBOSE_ON_ERROR 1 +#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR) +#define DMA_INT_MEM 4 + +#endif /* _ASM_ARCH_CRIS_DMA_H */ diff --git a/arch/cris/include/arch-v32/arch/elf.h b/arch/cris/include/arch-v32/arch/elf.h new file mode 100644 index 000000000000..1324e505a4d8 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/elf.h @@ -0,0 +1,73 @@ +#ifndef _ASM_CRIS_ELF_H +#define _ASM_CRIS_ELF_H + +#define ELF_CORE_EFLAGS EF_CRIS_VARIANT_V32 + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) \ + ((x)->e_machine == EM_CRIS \ + && ((((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_V32 \ + || (((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_COMMON_V10_V32)))) + +/* CRISv32 ELF register definitions. */ + +#include + +/* Explicitly zero out registers to increase determinism. */ +#define ELF_PLAT_INIT(_r, load_addr) do { \ + (_r)->r13 = 0; (_r)->r12 = 0; (_r)->r11 = 0; (_r)->r10 = 0; \ + (_r)->r9 = 0; (_r)->r8 = 0; (_r)->r7 = 0; (_r)->r6 = 0; \ + (_r)->r5 = 0; (_r)->r4 = 0; (_r)->r3 = 0; (_r)->r2 = 0; \ + (_r)->r1 = 0; (_r)->r0 = 0; (_r)->mof = 0; (_r)->srp = 0; \ + (_r)->acr = 0; \ +} while (0) + +/* + * An executable for which elf_read_implies_exec() returns TRUE will + * have the READ_IMPLIES_EXEC personality flag set automatically. + */ +#define elf_read_implies_exec_binary(ex, have_pt_gnu_stack) (!(have_pt_gnu_stack)) + +/* + * This is basically a pt_regs with the additional definition + * of the stack pointer since it's needed in a core dump. + * pr_regs is a elf_gregset_t and should be filled according + * to the layout of user_regs_struct. + */ +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ + pr_reg[0] = regs->r0; \ + pr_reg[1] = regs->r1; \ + pr_reg[2] = regs->r2; \ + pr_reg[3] = regs->r3; \ + pr_reg[4] = regs->r4; \ + pr_reg[5] = regs->r5; \ + pr_reg[6] = regs->r6; \ + pr_reg[7] = regs->r7; \ + pr_reg[8] = regs->r8; \ + pr_reg[9] = regs->r9; \ + pr_reg[10] = regs->r10; \ + pr_reg[11] = regs->r11; \ + pr_reg[12] = regs->r12; \ + pr_reg[13] = regs->r13; \ + pr_reg[14] = rdusp(); /* SP */ \ + pr_reg[15] = regs->acr; /* ACR */ \ + pr_reg[16] = 0; /* BZ */ \ + pr_reg[17] = rdvr(); /* VR */ \ + pr_reg[18] = 0; /* PID */ \ + pr_reg[19] = regs->srs; /* SRS */ \ + pr_reg[20] = 0; /* WZ */ \ + pr_reg[21] = regs->exs; /* EXS */ \ + pr_reg[22] = regs->eda; /* EDA */ \ + pr_reg[23] = regs->mof; /* MOF */ \ + pr_reg[24] = 0; /* DZ */ \ + pr_reg[25] = 0; /* EBP */ \ + pr_reg[26] = regs->erp; /* ERP */ \ + pr_reg[27] = regs->srp; /* SRP */ \ + pr_reg[28] = 0; /* NRP */ \ + pr_reg[29] = regs->ccs; /* CCS */ \ + pr_reg[30] = rdusp(); /* USP */ \ + pr_reg[31] = regs->spc; /* SPC */ \ + +#endif /* _ASM_CRIS_ELF_H */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/Makefile b/arch/cris/include/arch-v32/arch/hwregs/Makefile new file mode 100644 index 000000000000..f9a05d2aa061 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/Makefile @@ -0,0 +1,186 @@ +# Makefile to generate or copy the latest register definitions +# and related datastructures and helpermacros. +# The offical place for these files is at: +RELEASE ?= r1_alfa5 +OFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/ + +# which is updated on each new release. +INCL_ASMFILES = +INCL_FILES = ata_defs.h +INCL_FILES += bif_core_defs.h +INCL_ASMFILES += bif_core_defs_asm.h +INCL_FILES += bif_slave_defs.h +#INCL_FILES += bif_slave_ext_defs.h +INCL_FILES += config_defs.h +INCL_ASMFILES += config_defs_asm.h +INCL_FILES += cpu_vect.h +#INCL_FILES += cris_defs.h +#INCL_FILES += cris_supp_reg.h # In handcrafted supp_reg.h +INCL_FILES += dma.h +INCL_FILES += dma_defs.h +INCL_FILES += eth_defs.h +INCL_FILES += extmem_defs.h +INCL_FILES += gio_defs.h +INCL_ASMFILES += gio_defs_asm.h +INCL_FILES += intr_vect.h +INCL_FILES += intr_vect_defs.h +INCL_ASMFILES += intr_vect_defs_asm.h +INCL_FILES += marb_bp_defs.h +INCL_FILES += marb_defs.h +INCL_ASMFILES += mmu_defs_asm.h +#INCL_FILES += mmu_supp_reg.h # In handcrafted supp_reg.h +#INCL_FILES += par_defs.h # No useful content +INCL_FILES += pinmux_defs.h +INCL_FILES += reg_map.h +INCL_ASMFILES += reg_map_asm.h +INCL_FILES += reg_rdwr.h +INCL_FILES += ser_defs.h +#INCL_FILES += spec_reg.h # In handcrafted supp_reg.h +INCL_FILES += sser_defs.h +INCL_FILES += strcop_defs.h +#INCL_FILES += strcop.h # Where is this? +INCL_FILES += strmux_defs.h +#INCL_FILES += supp_reg.h # Handcrafted instead +INCL_FILES += timer_defs.h + +REGDESC = +REGDESC += $(BASEDIR)/io/ata/rtl/ata_regs.r +REGDESC += $(BASEDIR)/io/bif/rtl/bif_core_regs.r +REGDESC += $(BASEDIR)/io/bif/rtl/bif_slave_regs.r +#REGDESC += $(BASEDIR)/io/bif/sw/bif_slave_ext_regs.r +REGDESC += $(DESIGNDIR)/top/rtl/config_regs.r +REGDESC += $(BASEDIR)/mod/dma_common/rtl/dma_regdes.r +REGDESC += $(BASEDIR)/io/eth/rtl/eth_regs.r +REGDESC += $(BASEDIR)/io/bif/mod/extmem/extmem_regs.r +REGDESC += $(DESIGNDIR)/gio/rtl/gio_regs.r +REGDESC += $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r +REGDESC += $(BASEDIR)/core/memarb/rtl/guinness/marb_top.r +REGDESC += $(BASEDIR)/core/cpu/mmu/doc/mmu_regs.r +#REGDESC += $(BASEDIR)/io/par_port/rtl/par_regs.r +REGDESC += $(BASEDIR)/io/pinmux/rtl/guinness/pinmux_regs.r +REGDESC += $(BASEDIR)/io/ser/rtl/ser_regs.r +REGDESC += $(BASEDIR)/core/strcop/rtl/strcop_regs.r +REGDESC += $(BASEDIR)/io/strmux/rtl/guinness/strmux_regs.r +REGDESC += $(BASEDIR)/io/timer/rtl/timer_regs.r +#REGDESC += $(BASEDIR)/io/usb/usb1_1/rtl/usb_regs.r + + +BASEDIR = /n/asic/design +DESIGNDIR = /n/asic/projects/guinness/design +RDES2C = /n/asic/bin/rdes2c +RDES2C = /n/asic/design/tools/rdesc/rdes2c +RDES2INTR = /n/asic/design/tools/rdesc/rdes2intr +RDES2TXT = /n/asic/design/tools/rdesc/rdes2txt + +## all - Just print help - you probably want to do 'make gen' +all: help + +# Disable implicit rule that may generate deleted files from RCS/ directory. +%.r: + +%.h: + +## help - This help +help: + @grep '^## ' Makefile + +## gen - Generate include files +gen: $(INCL_FILES) $(INCL_ASMFILES) + +ata_defs.h: $(BASEDIR)/io/ata/rtl/ata_regs.r + $(RDES2C) $< +config_defs.h: $(DESIGNDIR)/top/rtl/config_regs.r + $(RDES2C) $< +config_defs_asm.h: $(DESIGNDIR)/top/rtl/config_regs.r + $(RDES2C) -asm $< +# Can't generate cpu_vect.h yet +#cpu_vect.h: $(DESIGNDIR)/top/rtl/cpu_vect.r # ???? +# $(RDES2INTR) $< +cpu_vect.h: $(OFFICIAL_INCDIR)cpu_vect.h + cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ +dma_defs.h: $(BASEDIR)/core/dma/rtl/common/dma_regdes.r + $(RDES2C) $< +$(BASEDIR)/core/dma/sw/dma.h: +dma.h: $(BASEDIR)/core/dma/sw/dma.h + cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ +eth_defs.h: $(BASEDIR)/io/eth/rtl/eth_regs.r + $(RDES2C) $< +extmem_defs.h: $(BASEDIR)/io/bif/mod/extmem/extmem_regs.r + $(RDES2C) $< +gio_defs.h: $(DESIGNDIR)/gio/rtl/gio_regs.r + $(RDES2C) $< +intr_vect_defs.h: $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r + $(RDES2C) $< +intr_vect_defs_asm.h: $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r + $(RDES2C) -asm $< +# Can't generate intr_vect.h yet +#intr_vect.h: $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r +# $(RDES2INTR) $< +intr_vect.h: $(OFFICIAL_INCDIR)intr_vect.h + cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ +mmu_defs_asm.h: $(BASEDIR)/core/cpu/mmu/doc/mmu_regs.r + $(RDES2C) -asm $< +par_defs.h: $(BASEDIR)/io/par_port/rtl/par_regs.r + $(RDES2C) $< + +# From /n/asic/projects/guinness/design/ +reg_map.h: $(DESIGNDIR)/top/rtl/global.rmap $(DESIGNDIR)/top/mod/modreg.rmap + $(RDES2C) -base 0xb0000000 $^ +reg_map_asm.h: $(DESIGNDIR)/top/rtl/global.rmap $(DESIGNDIR)/top/mod/modreg.rmap + $(RDES2C) -base 0xb0000000 -asm -outfile $@ $^ + +reg_rdwr.h: $(DESIGNDIR)/top/sw/include/reg_rdwr.h + cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ + +ser_defs.h: $(BASEDIR)/io/ser/rtl/ser_regs.r + $(RDES2C) $< +strcop_defs.h: $(BASEDIR)/core/strcop/rtl/strcop_regs.r + $(RDES2C) $< +strcop.h: $(BASEDIR)/core/strcop/rtl/strcop.h + cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ +strmux_defs.h: $(BASEDIR)/io/strmux/rtl/guinness/strmux_regs.r + $(RDES2C) $< +timer_defs.h: $(BASEDIR)/io/timer/rtl/timer_regs.r + $(RDES2C) $< +usb_defs.h: $(BASEDIR)/io/usb/usb1_1/rtl/usb_regs.r + $(RDES2C) $< + +## copy - Copy files from official location +copy: + @for HFILE in $(INCL_FILES); do \ + echo " $$HFILE"; \ + cat $(OFFICIAL_INCDIR)$$HFILE | sed -e 's/\$$Id\:/id\:/g' > $$HFILE; \ + done + @for HFILE in $(INCL_ASMFILES); do \ + echo " $$HFILE"; \ + cat $(OFFICIAL_INCDIR)asm/$$HFILE | sed -e 's/\$$Id\:/id\:/g' > $$HFILE; \ + done +## ls_official - List official location +ls_official: + (cd $(OFFICIAL_INCDIR); ls -l *.h ) + +## diff_official - Diff current directory with official location +diff_official: + diff . $(OFFICIAL_INCDIR) + +## doc - Generate .axw files from register description. +doc: $(REGDESC) + for RDES in $^; do \ + $(RDES2TXT) $$RDES; \ + done + +.PHONY: axw +## %.axw - Generate the specified .axw file (doesn't work for all files +## due to inconsistent naming ir .r files. +%.axw: axw + @for RDES in $(REGDESC); do \ + if echo "$$RDES" | grep $* ; then \ + $(RDES2TXT) $$RDES; \ + fi \ + done + +.PHONY: clean +## clean - Remove .h files and .axw files. +clean: + rm -rf $(INCL_FILES) *.axw + diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/ata_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/ata_defs_asm.h new file mode 100644 index 000000000000..866191418f9c --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/ata_defs_asm.h @@ -0,0 +1,222 @@ +#ifndef __ata_defs_asm_h +#define __ata_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/ata/rtl/ata_regs.r + * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp + * last modfied: Mon Apr 11 16:06:25 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/ata_defs_asm.h ../../inst/ata/rtl/ata_regs.r + * id: $Id: ata_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_ctrl0, scope ata, type rw */ +#define reg_ata_rw_ctrl0___pio_hold___lsb 0 +#define reg_ata_rw_ctrl0___pio_hold___width 6 +#define reg_ata_rw_ctrl0___pio_strb___lsb 6 +#define reg_ata_rw_ctrl0___pio_strb___width 6 +#define reg_ata_rw_ctrl0___pio_setup___lsb 12 +#define reg_ata_rw_ctrl0___pio_setup___width 6 +#define reg_ata_rw_ctrl0___dma_hold___lsb 18 +#define reg_ata_rw_ctrl0___dma_hold___width 6 +#define reg_ata_rw_ctrl0___dma_strb___lsb 24 +#define reg_ata_rw_ctrl0___dma_strb___width 6 +#define reg_ata_rw_ctrl0___rst___lsb 30 +#define reg_ata_rw_ctrl0___rst___width 1 +#define reg_ata_rw_ctrl0___rst___bit 30 +#define reg_ata_rw_ctrl0___en___lsb 31 +#define reg_ata_rw_ctrl0___en___width 1 +#define reg_ata_rw_ctrl0___en___bit 31 +#define reg_ata_rw_ctrl0_offset 12 + +/* Register rw_ctrl1, scope ata, type rw */ +#define reg_ata_rw_ctrl1___udma_tcyc___lsb 0 +#define reg_ata_rw_ctrl1___udma_tcyc___width 4 +#define reg_ata_rw_ctrl1___udma_tdvs___lsb 4 +#define reg_ata_rw_ctrl1___udma_tdvs___width 4 +#define reg_ata_rw_ctrl1_offset 16 + +/* Register rw_ctrl2, scope ata, type rw */ +#define reg_ata_rw_ctrl2___data___lsb 0 +#define reg_ata_rw_ctrl2___data___width 16 +#define reg_ata_rw_ctrl2___dma_size___lsb 19 +#define reg_ata_rw_ctrl2___dma_size___width 1 +#define reg_ata_rw_ctrl2___dma_size___bit 19 +#define reg_ata_rw_ctrl2___multi___lsb 20 +#define reg_ata_rw_ctrl2___multi___width 1 +#define reg_ata_rw_ctrl2___multi___bit 20 +#define reg_ata_rw_ctrl2___hsh___lsb 21 +#define reg_ata_rw_ctrl2___hsh___width 2 +#define reg_ata_rw_ctrl2___trf_mode___lsb 23 +#define reg_ata_rw_ctrl2___trf_mode___width 1 +#define reg_ata_rw_ctrl2___trf_mode___bit 23 +#define reg_ata_rw_ctrl2___rw___lsb 24 +#define reg_ata_rw_ctrl2___rw___width 1 +#define reg_ata_rw_ctrl2___rw___bit 24 +#define reg_ata_rw_ctrl2___addr___lsb 25 +#define reg_ata_rw_ctrl2___addr___width 3 +#define reg_ata_rw_ctrl2___cs0___lsb 28 +#define reg_ata_rw_ctrl2___cs0___width 1 +#define reg_ata_rw_ctrl2___cs0___bit 28 +#define reg_ata_rw_ctrl2___cs1___lsb 29 +#define reg_ata_rw_ctrl2___cs1___width 1 +#define reg_ata_rw_ctrl2___cs1___bit 29 +#define reg_ata_rw_ctrl2___sel___lsb 30 +#define reg_ata_rw_ctrl2___sel___width 2 +#define reg_ata_rw_ctrl2_offset 0 + +/* Register rs_stat_data, scope ata, type rs */ +#define reg_ata_rs_stat_data___data___lsb 0 +#define reg_ata_rs_stat_data___data___width 16 +#define reg_ata_rs_stat_data___dav___lsb 16 +#define reg_ata_rs_stat_data___dav___width 1 +#define reg_ata_rs_stat_data___dav___bit 16 +#define reg_ata_rs_stat_data___busy___lsb 17 +#define reg_ata_rs_stat_data___busy___width 1 +#define reg_ata_rs_stat_data___busy___bit 17 +#define reg_ata_rs_stat_data_offset 4 + +/* Register r_stat_data, scope ata, type r */ +#define reg_ata_r_stat_data___data___lsb 0 +#define reg_ata_r_stat_data___data___width 16 +#define reg_ata_r_stat_data___dav___lsb 16 +#define reg_ata_r_stat_data___dav___width 1 +#define reg_ata_r_stat_data___dav___bit 16 +#define reg_ata_r_stat_data___busy___lsb 17 +#define reg_ata_r_stat_data___busy___width 1 +#define reg_ata_r_stat_data___busy___bit 17 +#define reg_ata_r_stat_data_offset 8 + +/* Register rw_trf_cnt, scope ata, type rw */ +#define reg_ata_rw_trf_cnt___cnt___lsb 0 +#define reg_ata_rw_trf_cnt___cnt___width 17 +#define reg_ata_rw_trf_cnt_offset 20 + +/* Register r_stat_misc, scope ata, type r */ +#define reg_ata_r_stat_misc___crc___lsb 0 +#define reg_ata_r_stat_misc___crc___width 16 +#define reg_ata_r_stat_misc_offset 24 + +/* Register rw_intr_mask, scope ata, type rw */ +#define reg_ata_rw_intr_mask___bus0___lsb 0 +#define reg_ata_rw_intr_mask___bus0___width 1 +#define reg_ata_rw_intr_mask___bus0___bit 0 +#define reg_ata_rw_intr_mask___bus1___lsb 1 +#define reg_ata_rw_intr_mask___bus1___width 1 +#define reg_ata_rw_intr_mask___bus1___bit 1 +#define reg_ata_rw_intr_mask___bus2___lsb 2 +#define reg_ata_rw_intr_mask___bus2___width 1 +#define reg_ata_rw_intr_mask___bus2___bit 2 +#define reg_ata_rw_intr_mask___bus3___lsb 3 +#define reg_ata_rw_intr_mask___bus3___width 1 +#define reg_ata_rw_intr_mask___bus3___bit 3 +#define reg_ata_rw_intr_mask_offset 28 + +/* Register rw_ack_intr, scope ata, type rw */ +#define reg_ata_rw_ack_intr___bus0___lsb 0 +#define reg_ata_rw_ack_intr___bus0___width 1 +#define reg_ata_rw_ack_intr___bus0___bit 0 +#define reg_ata_rw_ack_intr___bus1___lsb 1 +#define reg_ata_rw_ack_intr___bus1___width 1 +#define reg_ata_rw_ack_intr___bus1___bit 1 +#define reg_ata_rw_ack_intr___bus2___lsb 2 +#define reg_ata_rw_ack_intr___bus2___width 1 +#define reg_ata_rw_ack_intr___bus2___bit 2 +#define reg_ata_rw_ack_intr___bus3___lsb 3 +#define reg_ata_rw_ack_intr___bus3___width 1 +#define reg_ata_rw_ack_intr___bus3___bit 3 +#define reg_ata_rw_ack_intr_offset 32 + +/* Register r_intr, scope ata, type r */ +#define reg_ata_r_intr___bus0___lsb 0 +#define reg_ata_r_intr___bus0___width 1 +#define reg_ata_r_intr___bus0___bit 0 +#define reg_ata_r_intr___bus1___lsb 1 +#define reg_ata_r_intr___bus1___width 1 +#define reg_ata_r_intr___bus1___bit 1 +#define reg_ata_r_intr___bus2___lsb 2 +#define reg_ata_r_intr___bus2___width 1 +#define reg_ata_r_intr___bus2___bit 2 +#define reg_ata_r_intr___bus3___lsb 3 +#define reg_ata_r_intr___bus3___width 1 +#define reg_ata_r_intr___bus3___bit 3 +#define reg_ata_r_intr_offset 36 + +/* Register r_masked_intr, scope ata, type r */ +#define reg_ata_r_masked_intr___bus0___lsb 0 +#define reg_ata_r_masked_intr___bus0___width 1 +#define reg_ata_r_masked_intr___bus0___bit 0 +#define reg_ata_r_masked_intr___bus1___lsb 1 +#define reg_ata_r_masked_intr___bus1___width 1 +#define reg_ata_r_masked_intr___bus1___bit 1 +#define reg_ata_r_masked_intr___bus2___lsb 2 +#define reg_ata_r_masked_intr___bus2___width 1 +#define reg_ata_r_masked_intr___bus2___bit 2 +#define reg_ata_r_masked_intr___bus3___lsb 3 +#define reg_ata_r_masked_intr___bus3___width 1 +#define reg_ata_r_masked_intr___bus3___bit 3 +#define reg_ata_r_masked_intr_offset 40 + + +/* Constants */ +#define regk_ata_active 0x00000001 +#define regk_ata_byte 0x00000001 +#define regk_ata_data 0x00000001 +#define regk_ata_dma 0x00000001 +#define regk_ata_inactive 0x00000000 +#define regk_ata_no 0x00000000 +#define regk_ata_nodata 0x00000000 +#define regk_ata_pio 0x00000000 +#define regk_ata_rd 0x00000001 +#define regk_ata_reg 0x00000000 +#define regk_ata_rw_ctrl0_default 0x00000000 +#define regk_ata_rw_ctrl2_default 0x00000000 +#define regk_ata_rw_intr_mask_default 0x00000000 +#define regk_ata_udma 0x00000002 +#define regk_ata_word 0x00000000 +#define regk_ata_wr 0x00000000 +#define regk_ata_yes 0x00000001 +#endif /* __ata_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/bif_core_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/bif_core_defs_asm.h new file mode 100644 index 000000000000..c686cb335621 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/bif_core_defs_asm.h @@ -0,0 +1,319 @@ +#ifndef __bif_core_defs_asm_h +#define __bif_core_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_core_regs.r + * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp + * last modfied: Mon Apr 11 16:06:33 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_core_defs_asm.h ../../inst/bif/rtl/bif_core_regs.r + * id: $Id: bif_core_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_grp1_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp1_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp1_cfg___lw___width 6 +#define reg_bif_core_rw_grp1_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp1_cfg___ew___width 3 +#define reg_bif_core_rw_grp1_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp1_cfg___zw___width 3 +#define reg_bif_core_rw_grp1_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp1_cfg___aw___width 2 +#define reg_bif_core_rw_grp1_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp1_cfg___dw___width 2 +#define reg_bif_core_rw_grp1_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp1_cfg___ewb___width 2 +#define reg_bif_core_rw_grp1_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp1_cfg___bw___width 1 +#define reg_bif_core_rw_grp1_cfg___bw___bit 18 +#define reg_bif_core_rw_grp1_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp1_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp1_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp1_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp1_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp1_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp1_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp1_cfg___mode___width 1 +#define reg_bif_core_rw_grp1_cfg___mode___bit 21 +#define reg_bif_core_rw_grp1_cfg_offset 0 + +/* Register rw_grp2_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp2_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp2_cfg___lw___width 6 +#define reg_bif_core_rw_grp2_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp2_cfg___ew___width 3 +#define reg_bif_core_rw_grp2_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp2_cfg___zw___width 3 +#define reg_bif_core_rw_grp2_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp2_cfg___aw___width 2 +#define reg_bif_core_rw_grp2_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp2_cfg___dw___width 2 +#define reg_bif_core_rw_grp2_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp2_cfg___ewb___width 2 +#define reg_bif_core_rw_grp2_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp2_cfg___bw___width 1 +#define reg_bif_core_rw_grp2_cfg___bw___bit 18 +#define reg_bif_core_rw_grp2_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp2_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp2_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp2_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp2_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp2_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp2_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp2_cfg___mode___width 1 +#define reg_bif_core_rw_grp2_cfg___mode___bit 21 +#define reg_bif_core_rw_grp2_cfg_offset 4 + +/* Register rw_grp3_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp3_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp3_cfg___lw___width 6 +#define reg_bif_core_rw_grp3_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp3_cfg___ew___width 3 +#define reg_bif_core_rw_grp3_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp3_cfg___zw___width 3 +#define reg_bif_core_rw_grp3_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp3_cfg___aw___width 2 +#define reg_bif_core_rw_grp3_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp3_cfg___dw___width 2 +#define reg_bif_core_rw_grp3_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp3_cfg___ewb___width 2 +#define reg_bif_core_rw_grp3_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp3_cfg___bw___width 1 +#define reg_bif_core_rw_grp3_cfg___bw___bit 18 +#define reg_bif_core_rw_grp3_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp3_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp3_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp3_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp3_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp3_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp3_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp3_cfg___mode___width 1 +#define reg_bif_core_rw_grp3_cfg___mode___bit 21 +#define reg_bif_core_rw_grp3_cfg___gated_csp0___lsb 24 +#define reg_bif_core_rw_grp3_cfg___gated_csp0___width 2 +#define reg_bif_core_rw_grp3_cfg___gated_csp1___lsb 26 +#define reg_bif_core_rw_grp3_cfg___gated_csp1___width 2 +#define reg_bif_core_rw_grp3_cfg___gated_csp2___lsb 28 +#define reg_bif_core_rw_grp3_cfg___gated_csp2___width 2 +#define reg_bif_core_rw_grp3_cfg___gated_csp3___lsb 30 +#define reg_bif_core_rw_grp3_cfg___gated_csp3___width 2 +#define reg_bif_core_rw_grp3_cfg_offset 8 + +/* Register rw_grp4_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp4_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp4_cfg___lw___width 6 +#define reg_bif_core_rw_grp4_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp4_cfg___ew___width 3 +#define reg_bif_core_rw_grp4_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp4_cfg___zw___width 3 +#define reg_bif_core_rw_grp4_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp4_cfg___aw___width 2 +#define reg_bif_core_rw_grp4_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp4_cfg___dw___width 2 +#define reg_bif_core_rw_grp4_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp4_cfg___ewb___width 2 +#define reg_bif_core_rw_grp4_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp4_cfg___bw___width 1 +#define reg_bif_core_rw_grp4_cfg___bw___bit 18 +#define reg_bif_core_rw_grp4_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp4_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp4_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp4_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp4_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp4_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp4_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp4_cfg___mode___width 1 +#define reg_bif_core_rw_grp4_cfg___mode___bit 21 +#define reg_bif_core_rw_grp4_cfg___gated_csp4___lsb 26 +#define reg_bif_core_rw_grp4_cfg___gated_csp4___width 2 +#define reg_bif_core_rw_grp4_cfg___gated_csp5___lsb 28 +#define reg_bif_core_rw_grp4_cfg___gated_csp5___width 2 +#define reg_bif_core_rw_grp4_cfg___gated_csp6___lsb 30 +#define reg_bif_core_rw_grp4_cfg___gated_csp6___width 2 +#define reg_bif_core_rw_grp4_cfg_offset 12 + +/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___lsb 0 +#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___width 5 +#define reg_bif_core_rw_sdram_cfg_grp0___ca___lsb 5 +#define reg_bif_core_rw_sdram_cfg_grp0___ca___width 3 +#define reg_bif_core_rw_sdram_cfg_grp0___type___lsb 8 +#define reg_bif_core_rw_sdram_cfg_grp0___type___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___type___bit 8 +#define reg_bif_core_rw_sdram_cfg_grp0___bw___lsb 9 +#define reg_bif_core_rw_sdram_cfg_grp0___bw___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___bw___bit 9 +#define reg_bif_core_rw_sdram_cfg_grp0___sh___lsb 10 +#define reg_bif_core_rw_sdram_cfg_grp0___sh___width 3 +#define reg_bif_core_rw_sdram_cfg_grp0___wmm___lsb 13 +#define reg_bif_core_rw_sdram_cfg_grp0___wmm___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___wmm___bit 13 +#define reg_bif_core_rw_sdram_cfg_grp0___sh16___lsb 14 +#define reg_bif_core_rw_sdram_cfg_grp0___sh16___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___sh16___bit 14 +#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___lsb 15 +#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___width 5 +#define reg_bif_core_rw_sdram_cfg_grp0_offset 16 + +/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___lsb 0 +#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___width 5 +#define reg_bif_core_rw_sdram_cfg_grp1___ca___lsb 5 +#define reg_bif_core_rw_sdram_cfg_grp1___ca___width 3 +#define reg_bif_core_rw_sdram_cfg_grp1___type___lsb 8 +#define reg_bif_core_rw_sdram_cfg_grp1___type___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___type___bit 8 +#define reg_bif_core_rw_sdram_cfg_grp1___bw___lsb 9 +#define reg_bif_core_rw_sdram_cfg_grp1___bw___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___bw___bit 9 +#define reg_bif_core_rw_sdram_cfg_grp1___sh___lsb 10 +#define reg_bif_core_rw_sdram_cfg_grp1___sh___width 3 +#define reg_bif_core_rw_sdram_cfg_grp1___wmm___lsb 13 +#define reg_bif_core_rw_sdram_cfg_grp1___wmm___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___wmm___bit 13 +#define reg_bif_core_rw_sdram_cfg_grp1___sh16___lsb 14 +#define reg_bif_core_rw_sdram_cfg_grp1___sh16___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___sh16___bit 14 +#define reg_bif_core_rw_sdram_cfg_grp1_offset 20 + +/* Register rw_sdram_timing, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_timing___cl___lsb 0 +#define reg_bif_core_rw_sdram_timing___cl___width 3 +#define reg_bif_core_rw_sdram_timing___rcd___lsb 3 +#define reg_bif_core_rw_sdram_timing___rcd___width 3 +#define reg_bif_core_rw_sdram_timing___rp___lsb 6 +#define reg_bif_core_rw_sdram_timing___rp___width 3 +#define reg_bif_core_rw_sdram_timing___rc___lsb 9 +#define reg_bif_core_rw_sdram_timing___rc___width 2 +#define reg_bif_core_rw_sdram_timing___dpl___lsb 11 +#define reg_bif_core_rw_sdram_timing___dpl___width 2 +#define reg_bif_core_rw_sdram_timing___pde___lsb 13 +#define reg_bif_core_rw_sdram_timing___pde___width 1 +#define reg_bif_core_rw_sdram_timing___pde___bit 13 +#define reg_bif_core_rw_sdram_timing___ref___lsb 14 +#define reg_bif_core_rw_sdram_timing___ref___width 2 +#define reg_bif_core_rw_sdram_timing___cpd___lsb 16 +#define reg_bif_core_rw_sdram_timing___cpd___width 1 +#define reg_bif_core_rw_sdram_timing___cpd___bit 16 +#define reg_bif_core_rw_sdram_timing___sdcke___lsb 17 +#define reg_bif_core_rw_sdram_timing___sdcke___width 1 +#define reg_bif_core_rw_sdram_timing___sdcke___bit 17 +#define reg_bif_core_rw_sdram_timing___sdclk___lsb 18 +#define reg_bif_core_rw_sdram_timing___sdclk___width 1 +#define reg_bif_core_rw_sdram_timing___sdclk___bit 18 +#define reg_bif_core_rw_sdram_timing_offset 24 + +/* Register rw_sdram_cmd, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_cmd___cmd___lsb 0 +#define reg_bif_core_rw_sdram_cmd___cmd___width 3 +#define reg_bif_core_rw_sdram_cmd___mrs_data___lsb 3 +#define reg_bif_core_rw_sdram_cmd___mrs_data___width 15 +#define reg_bif_core_rw_sdram_cmd_offset 28 + +/* Register rs_sdram_ref_stat, scope bif_core, type rs */ +#define reg_bif_core_rs_sdram_ref_stat___ok___lsb 0 +#define reg_bif_core_rs_sdram_ref_stat___ok___width 1 +#define reg_bif_core_rs_sdram_ref_stat___ok___bit 0 +#define reg_bif_core_rs_sdram_ref_stat_offset 32 + +/* Register r_sdram_ref_stat, scope bif_core, type r */ +#define reg_bif_core_r_sdram_ref_stat___ok___lsb 0 +#define reg_bif_core_r_sdram_ref_stat___ok___width 1 +#define reg_bif_core_r_sdram_ref_stat___ok___bit 0 +#define reg_bif_core_r_sdram_ref_stat_offset 36 + + +/* Constants */ +#define regk_bif_core_bank2 0x00000000 +#define regk_bif_core_bank4 0x00000001 +#define regk_bif_core_bit10 0x0000000a +#define regk_bif_core_bit11 0x0000000b +#define regk_bif_core_bit12 0x0000000c +#define regk_bif_core_bit13 0x0000000d +#define regk_bif_core_bit14 0x0000000e +#define regk_bif_core_bit15 0x0000000f +#define regk_bif_core_bit16 0x00000010 +#define regk_bif_core_bit17 0x00000011 +#define regk_bif_core_bit18 0x00000012 +#define regk_bif_core_bit19 0x00000013 +#define regk_bif_core_bit20 0x00000014 +#define regk_bif_core_bit21 0x00000015 +#define regk_bif_core_bit22 0x00000016 +#define regk_bif_core_bit23 0x00000017 +#define regk_bif_core_bit24 0x00000018 +#define regk_bif_core_bit25 0x00000019 +#define regk_bif_core_bit26 0x0000001a +#define regk_bif_core_bit27 0x0000001b +#define regk_bif_core_bit28 0x0000001c +#define regk_bif_core_bit29 0x0000001d +#define regk_bif_core_bit9 0x00000009 +#define regk_bif_core_bw16 0x00000001 +#define regk_bif_core_bw32 0x00000000 +#define regk_bif_core_bwe 0x00000000 +#define regk_bif_core_cwe 0x00000001 +#define regk_bif_core_e15us 0x00000001 +#define regk_bif_core_e7800ns 0x00000002 +#define regk_bif_core_grp0 0x00000000 +#define regk_bif_core_grp1 0x00000001 +#define regk_bif_core_mrs 0x00000003 +#define regk_bif_core_no 0x00000000 +#define regk_bif_core_none 0x00000000 +#define regk_bif_core_nop 0x00000000 +#define regk_bif_core_off 0x00000000 +#define regk_bif_core_pre 0x00000002 +#define regk_bif_core_r_sdram_ref_stat_default 0x00000001 +#define regk_bif_core_rd 0x00000002 +#define regk_bif_core_ref 0x00000001 +#define regk_bif_core_rs_sdram_ref_stat_default 0x00000001 +#define regk_bif_core_rw_grp1_cfg_default 0x000006cf +#define regk_bif_core_rw_grp2_cfg_default 0x000006cf +#define regk_bif_core_rw_grp3_cfg_default 0x000006cf +#define regk_bif_core_rw_grp4_cfg_default 0x000006cf +#define regk_bif_core_rw_sdram_cfg_grp1_default 0x00000000 +#define regk_bif_core_slf 0x00000004 +#define regk_bif_core_wr 0x00000001 +#define regk_bif_core_yes 0x00000001 +#endif /* __bif_core_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/bif_dma_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/bif_dma_defs_asm.h new file mode 100644 index 000000000000..71532aa18168 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/bif_dma_defs_asm.h @@ -0,0 +1,495 @@ +#ifndef __bif_dma_defs_asm_h +#define __bif_dma_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_dma_regs.r + * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp + * last modfied: Mon Apr 11 16:06:33 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_dma_defs_asm.h ../../inst/bif/rtl/bif_dma_regs.r + * id: $Id: bif_dma_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_ch0_ctrl, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch0_ctrl___bw___lsb 0 +#define reg_bif_dma_rw_ch0_ctrl___bw___width 2 +#define reg_bif_dma_rw_ch0_ctrl___burst_len___lsb 2 +#define reg_bif_dma_rw_ch0_ctrl___burst_len___width 1 +#define reg_bif_dma_rw_ch0_ctrl___burst_len___bit 2 +#define reg_bif_dma_rw_ch0_ctrl___cont___lsb 3 +#define reg_bif_dma_rw_ch0_ctrl___cont___width 1 +#define reg_bif_dma_rw_ch0_ctrl___cont___bit 3 +#define reg_bif_dma_rw_ch0_ctrl___end_pad___lsb 4 +#define reg_bif_dma_rw_ch0_ctrl___end_pad___width 1 +#define reg_bif_dma_rw_ch0_ctrl___end_pad___bit 4 +#define reg_bif_dma_rw_ch0_ctrl___cnt___lsb 5 +#define reg_bif_dma_rw_ch0_ctrl___cnt___width 1 +#define reg_bif_dma_rw_ch0_ctrl___cnt___bit 5 +#define reg_bif_dma_rw_ch0_ctrl___dreq_pin___lsb 6 +#define reg_bif_dma_rw_ch0_ctrl___dreq_pin___width 3 +#define reg_bif_dma_rw_ch0_ctrl___dreq_mode___lsb 9 +#define reg_bif_dma_rw_ch0_ctrl___dreq_mode___width 2 +#define reg_bif_dma_rw_ch0_ctrl___tc_in_pin___lsb 11 +#define reg_bif_dma_rw_ch0_ctrl___tc_in_pin___width 3 +#define reg_bif_dma_rw_ch0_ctrl___tc_in_mode___lsb 14 +#define reg_bif_dma_rw_ch0_ctrl___tc_in_mode___width 2 +#define reg_bif_dma_rw_ch0_ctrl___bus_mode___lsb 16 +#define reg_bif_dma_rw_ch0_ctrl___bus_mode___width 2 +#define reg_bif_dma_rw_ch0_ctrl___rate_en___lsb 18 +#define reg_bif_dma_rw_ch0_ctrl___rate_en___width 1 +#define reg_bif_dma_rw_ch0_ctrl___rate_en___bit 18 +#define reg_bif_dma_rw_ch0_ctrl___wr_all___lsb 19 +#define reg_bif_dma_rw_ch0_ctrl___wr_all___width 1 +#define reg_bif_dma_rw_ch0_ctrl___wr_all___bit 19 +#define reg_bif_dma_rw_ch0_ctrl_offset 0 + +/* Register rw_ch0_addr, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch0_addr___addr___lsb 0 +#define reg_bif_dma_rw_ch0_addr___addr___width 32 +#define reg_bif_dma_rw_ch0_addr_offset 4 + +/* Register rw_ch0_start, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch0_start___run___lsb 0 +#define reg_bif_dma_rw_ch0_start___run___width 1 +#define reg_bif_dma_rw_ch0_start___run___bit 0 +#define reg_bif_dma_rw_ch0_start_offset 8 + +/* Register rw_ch0_cnt, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch0_cnt___start_cnt___lsb 0 +#define reg_bif_dma_rw_ch0_cnt___start_cnt___width 16 +#define reg_bif_dma_rw_ch0_cnt_offset 12 + +/* Register r_ch0_stat, scope bif_dma, type r */ +#define reg_bif_dma_r_ch0_stat___cnt___lsb 0 +#define reg_bif_dma_r_ch0_stat___cnt___width 16 +#define reg_bif_dma_r_ch0_stat___run___lsb 31 +#define reg_bif_dma_r_ch0_stat___run___width 1 +#define reg_bif_dma_r_ch0_stat___run___bit 31 +#define reg_bif_dma_r_ch0_stat_offset 16 + +/* Register rw_ch1_ctrl, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch1_ctrl___bw___lsb 0 +#define reg_bif_dma_rw_ch1_ctrl___bw___width 2 +#define reg_bif_dma_rw_ch1_ctrl___burst_len___lsb 2 +#define reg_bif_dma_rw_ch1_ctrl___burst_len___width 1 +#define reg_bif_dma_rw_ch1_ctrl___burst_len___bit 2 +#define reg_bif_dma_rw_ch1_ctrl___cont___lsb 3 +#define reg_bif_dma_rw_ch1_ctrl___cont___width 1 +#define reg_bif_dma_rw_ch1_ctrl___cont___bit 3 +#define reg_bif_dma_rw_ch1_ctrl___end_discard___lsb 4 +#define reg_bif_dma_rw_ch1_ctrl___end_discard___width 1 +#define reg_bif_dma_rw_ch1_ctrl___end_discard___bit 4 +#define reg_bif_dma_rw_ch1_ctrl___cnt___lsb 5 +#define reg_bif_dma_rw_ch1_ctrl___cnt___width 1 +#define reg_bif_dma_rw_ch1_ctrl___cnt___bit 5 +#define reg_bif_dma_rw_ch1_ctrl___dreq_pin___lsb 6 +#define reg_bif_dma_rw_ch1_ctrl___dreq_pin___width 3 +#define reg_bif_dma_rw_ch1_ctrl___dreq_mode___lsb 9 +#define reg_bif_dma_rw_ch1_ctrl___dreq_mode___width 2 +#define reg_bif_dma_rw_ch1_ctrl___tc_in_pin___lsb 11 +#define reg_bif_dma_rw_ch1_ctrl___tc_in_pin___width 3 +#define reg_bif_dma_rw_ch1_ctrl___tc_in_mode___lsb 14 +#define reg_bif_dma_rw_ch1_ctrl___tc_in_mode___width 2 +#define reg_bif_dma_rw_ch1_ctrl___bus_mode___lsb 16 +#define reg_bif_dma_rw_ch1_ctrl___bus_mode___width 2 +#define reg_bif_dma_rw_ch1_ctrl___rate_en___lsb 18 +#define reg_bif_dma_rw_ch1_ctrl___rate_en___width 1 +#define reg_bif_dma_rw_ch1_ctrl___rate_en___bit 18 +#define reg_bif_dma_rw_ch1_ctrl_offset 32 + +/* Register rw_ch1_addr, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch1_addr___addr___lsb 0 +#define reg_bif_dma_rw_ch1_addr___addr___width 32 +#define reg_bif_dma_rw_ch1_addr_offset 36 + +/* Register rw_ch1_start, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch1_start___run___lsb 0 +#define reg_bif_dma_rw_ch1_start___run___width 1 +#define reg_bif_dma_rw_ch1_start___run___bit 0 +#define reg_bif_dma_rw_ch1_start_offset 40 + +/* Register rw_ch1_cnt, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch1_cnt___start_cnt___lsb 0 +#define reg_bif_dma_rw_ch1_cnt___start_cnt___width 16 +#define reg_bif_dma_rw_ch1_cnt_offset 44 + +/* Register r_ch1_stat, scope bif_dma, type r */ +#define reg_bif_dma_r_ch1_stat___cnt___lsb 0 +#define reg_bif_dma_r_ch1_stat___cnt___width 16 +#define reg_bif_dma_r_ch1_stat___run___lsb 31 +#define reg_bif_dma_r_ch1_stat___run___width 1 +#define reg_bif_dma_r_ch1_stat___run___bit 31 +#define reg_bif_dma_r_ch1_stat_offset 48 + +/* Register rw_ch2_ctrl, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch2_ctrl___bw___lsb 0 +#define reg_bif_dma_rw_ch2_ctrl___bw___width 2 +#define reg_bif_dma_rw_ch2_ctrl___burst_len___lsb 2 +#define reg_bif_dma_rw_ch2_ctrl___burst_len___width 1 +#define reg_bif_dma_rw_ch2_ctrl___burst_len___bit 2 +#define reg_bif_dma_rw_ch2_ctrl___cont___lsb 3 +#define reg_bif_dma_rw_ch2_ctrl___cont___width 1 +#define reg_bif_dma_rw_ch2_ctrl___cont___bit 3 +#define reg_bif_dma_rw_ch2_ctrl___end_pad___lsb 4 +#define reg_bif_dma_rw_ch2_ctrl___end_pad___width 1 +#define reg_bif_dma_rw_ch2_ctrl___end_pad___bit 4 +#define reg_bif_dma_rw_ch2_ctrl___cnt___lsb 5 +#define reg_bif_dma_rw_ch2_ctrl___cnt___width 1 +#define reg_bif_dma_rw_ch2_ctrl___cnt___bit 5 +#define reg_bif_dma_rw_ch2_ctrl___dreq_pin___lsb 6 +#define reg_bif_dma_rw_ch2_ctrl___dreq_pin___width 3 +#define reg_bif_dma_rw_ch2_ctrl___dreq_mode___lsb 9 +#define reg_bif_dma_rw_ch2_ctrl___dreq_mode___width 2 +#define reg_bif_dma_rw_ch2_ctrl___tc_in_pin___lsb 11 +#define reg_bif_dma_rw_ch2_ctrl___tc_in_pin___width 3 +#define reg_bif_dma_rw_ch2_ctrl___tc_in_mode___lsb 14 +#define reg_bif_dma_rw_ch2_ctrl___tc_in_mode___width 2 +#define reg_bif_dma_rw_ch2_ctrl___bus_mode___lsb 16 +#define reg_bif_dma_rw_ch2_ctrl___bus_mode___width 2 +#define reg_bif_dma_rw_ch2_ctrl___rate_en___lsb 18 +#define reg_bif_dma_rw_ch2_ctrl___rate_en___width 1 +#define reg_bif_dma_rw_ch2_ctrl___rate_en___bit 18 +#define reg_bif_dma_rw_ch2_ctrl___wr_all___lsb 19 +#define reg_bif_dma_rw_ch2_ctrl___wr_all___width 1 +#define reg_bif_dma_rw_ch2_ctrl___wr_all___bit 19 +#define reg_bif_dma_rw_ch2_ctrl_offset 64 + +/* Register rw_ch2_addr, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch2_addr___addr___lsb 0 +#define reg_bif_dma_rw_ch2_addr___addr___width 32 +#define reg_bif_dma_rw_ch2_addr_offset 68 + +/* Register rw_ch2_start, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch2_start___run___lsb 0 +#define reg_bif_dma_rw_ch2_start___run___width 1 +#define reg_bif_dma_rw_ch2_start___run___bit 0 +#define reg_bif_dma_rw_ch2_start_offset 72 + +/* Register rw_ch2_cnt, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch2_cnt___start_cnt___lsb 0 +#define reg_bif_dma_rw_ch2_cnt___start_cnt___width 16 +#define reg_bif_dma_rw_ch2_cnt_offset 76 + +/* Register r_ch2_stat, scope bif_dma, type r */ +#define reg_bif_dma_r_ch2_stat___cnt___lsb 0 +#define reg_bif_dma_r_ch2_stat___cnt___width 16 +#define reg_bif_dma_r_ch2_stat___run___lsb 31 +#define reg_bif_dma_r_ch2_stat___run___width 1 +#define reg_bif_dma_r_ch2_stat___run___bit 31 +#define reg_bif_dma_r_ch2_stat_offset 80 + +/* Register rw_ch3_ctrl, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch3_ctrl___bw___lsb 0 +#define reg_bif_dma_rw_ch3_ctrl___bw___width 2 +#define reg_bif_dma_rw_ch3_ctrl___burst_len___lsb 2 +#define reg_bif_dma_rw_ch3_ctrl___burst_len___width 1 +#define reg_bif_dma_rw_ch3_ctrl___burst_len___bit 2 +#define reg_bif_dma_rw_ch3_ctrl___cont___lsb 3 +#define reg_bif_dma_rw_ch3_ctrl___cont___width 1 +#define reg_bif_dma_rw_ch3_ctrl___cont___bit 3 +#define reg_bif_dma_rw_ch3_ctrl___end_discard___lsb 4 +#define reg_bif_dma_rw_ch3_ctrl___end_discard___width 1 +#define reg_bif_dma_rw_ch3_ctrl___end_discard___bit 4 +#define reg_bif_dma_rw_ch3_ctrl___cnt___lsb 5 +#define reg_bif_dma_rw_ch3_ctrl___cnt___width 1 +#define reg_bif_dma_rw_ch3_ctrl___cnt___bit 5 +#define reg_bif_dma_rw_ch3_ctrl___dreq_pin___lsb 6 +#define reg_bif_dma_rw_ch3_ctrl___dreq_pin___width 3 +#define reg_bif_dma_rw_ch3_ctrl___dreq_mode___lsb 9 +#define reg_bif_dma_rw_ch3_ctrl___dreq_mode___width 2 +#define reg_bif_dma_rw_ch3_ctrl___tc_in_pin___lsb 11 +#define reg_bif_dma_rw_ch3_ctrl___tc_in_pin___width 3 +#define reg_bif_dma_rw_ch3_ctrl___tc_in_mode___lsb 14 +#define reg_bif_dma_rw_ch3_ctrl___tc_in_mode___width 2 +#define reg_bif_dma_rw_ch3_ctrl___bus_mode___lsb 16 +#define reg_bif_dma_rw_ch3_ctrl___bus_mode___width 2 +#define reg_bif_dma_rw_ch3_ctrl___rate_en___lsb 18 +#define reg_bif_dma_rw_ch3_ctrl___rate_en___width 1 +#define reg_bif_dma_rw_ch3_ctrl___rate_en___bit 18 +#define reg_bif_dma_rw_ch3_ctrl_offset 96 + +/* Register rw_ch3_addr, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch3_addr___addr___lsb 0 +#define reg_bif_dma_rw_ch3_addr___addr___width 32 +#define reg_bif_dma_rw_ch3_addr_offset 100 + +/* Register rw_ch3_start, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch3_start___run___lsb 0 +#define reg_bif_dma_rw_ch3_start___run___width 1 +#define reg_bif_dma_rw_ch3_start___run___bit 0 +#define reg_bif_dma_rw_ch3_start_offset 104 + +/* Register rw_ch3_cnt, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ch3_cnt___start_cnt___lsb 0 +#define reg_bif_dma_rw_ch3_cnt___start_cnt___width 16 +#define reg_bif_dma_rw_ch3_cnt_offset 108 + +/* Register r_ch3_stat, scope bif_dma, type r */ +#define reg_bif_dma_r_ch3_stat___cnt___lsb 0 +#define reg_bif_dma_r_ch3_stat___cnt___width 16 +#define reg_bif_dma_r_ch3_stat___run___lsb 31 +#define reg_bif_dma_r_ch3_stat___run___width 1 +#define reg_bif_dma_r_ch3_stat___run___bit 31 +#define reg_bif_dma_r_ch3_stat_offset 112 + +/* Register rw_intr_mask, scope bif_dma, type rw */ +#define reg_bif_dma_rw_intr_mask___ext_dma0___lsb 0 +#define reg_bif_dma_rw_intr_mask___ext_dma0___width 1 +#define reg_bif_dma_rw_intr_mask___ext_dma0___bit 0 +#define reg_bif_dma_rw_intr_mask___ext_dma1___lsb 1 +#define reg_bif_dma_rw_intr_mask___ext_dma1___width 1 +#define reg_bif_dma_rw_intr_mask___ext_dma1___bit 1 +#define reg_bif_dma_rw_intr_mask___ext_dma2___lsb 2 +#define reg_bif_dma_rw_intr_mask___ext_dma2___width 1 +#define reg_bif_dma_rw_intr_mask___ext_dma2___bit 2 +#define reg_bif_dma_rw_intr_mask___ext_dma3___lsb 3 +#define reg_bif_dma_rw_intr_mask___ext_dma3___width 1 +#define reg_bif_dma_rw_intr_mask___ext_dma3___bit 3 +#define reg_bif_dma_rw_intr_mask_offset 128 + +/* Register rw_ack_intr, scope bif_dma, type rw */ +#define reg_bif_dma_rw_ack_intr___ext_dma0___lsb 0 +#define reg_bif_dma_rw_ack_intr___ext_dma0___width 1 +#define reg_bif_dma_rw_ack_intr___ext_dma0___bit 0 +#define reg_bif_dma_rw_ack_intr___ext_dma1___lsb 1 +#define reg_bif_dma_rw_ack_intr___ext_dma1___width 1 +#define reg_bif_dma_rw_ack_intr___ext_dma1___bit 1 +#define reg_bif_dma_rw_ack_intr___ext_dma2___lsb 2 +#define reg_bif_dma_rw_ack_intr___ext_dma2___width 1 +#define reg_bif_dma_rw_ack_intr___ext_dma2___bit 2 +#define reg_bif_dma_rw_ack_intr___ext_dma3___lsb 3 +#define reg_bif_dma_rw_ack_intr___ext_dma3___width 1 +#define reg_bif_dma_rw_ack_intr___ext_dma3___bit 3 +#define reg_bif_dma_rw_ack_intr_offset 132 + +/* Register r_intr, scope bif_dma, type r */ +#define reg_bif_dma_r_intr___ext_dma0___lsb 0 +#define reg_bif_dma_r_intr___ext_dma0___width 1 +#define reg_bif_dma_r_intr___ext_dma0___bit 0 +#define reg_bif_dma_r_intr___ext_dma1___lsb 1 +#define reg_bif_dma_r_intr___ext_dma1___width 1 +#define reg_bif_dma_r_intr___ext_dma1___bit 1 +#define reg_bif_dma_r_intr___ext_dma2___lsb 2 +#define reg_bif_dma_r_intr___ext_dma2___width 1 +#define reg_bif_dma_r_intr___ext_dma2___bit 2 +#define reg_bif_dma_r_intr___ext_dma3___lsb 3 +#define reg_bif_dma_r_intr___ext_dma3___width 1 +#define reg_bif_dma_r_intr___ext_dma3___bit 3 +#define reg_bif_dma_r_intr_offset 136 + +/* Register r_masked_intr, scope bif_dma, type r */ +#define reg_bif_dma_r_masked_intr___ext_dma0___lsb 0 +#define reg_bif_dma_r_masked_intr___ext_dma0___width 1 +#define reg_bif_dma_r_masked_intr___ext_dma0___bit 0 +#define reg_bif_dma_r_masked_intr___ext_dma1___lsb 1 +#define reg_bif_dma_r_masked_intr___ext_dma1___width 1 +#define reg_bif_dma_r_masked_intr___ext_dma1___bit 1 +#define reg_bif_dma_r_masked_intr___ext_dma2___lsb 2 +#define reg_bif_dma_r_masked_intr___ext_dma2___width 1 +#define reg_bif_dma_r_masked_intr___ext_dma2___bit 2 +#define reg_bif_dma_r_masked_intr___ext_dma3___lsb 3 +#define reg_bif_dma_r_masked_intr___ext_dma3___width 1 +#define reg_bif_dma_r_masked_intr___ext_dma3___bit 3 +#define reg_bif_dma_r_masked_intr_offset 140 + +/* Register rw_pin0_cfg, scope bif_dma, type rw */ +#define reg_bif_dma_rw_pin0_cfg___master_ch___lsb 0 +#define reg_bif_dma_rw_pin0_cfg___master_ch___width 2 +#define reg_bif_dma_rw_pin0_cfg___master_mode___lsb 2 +#define reg_bif_dma_rw_pin0_cfg___master_mode___width 3 +#define reg_bif_dma_rw_pin0_cfg___slave_ch___lsb 5 +#define reg_bif_dma_rw_pin0_cfg___slave_ch___width 2 +#define reg_bif_dma_rw_pin0_cfg___slave_mode___lsb 7 +#define reg_bif_dma_rw_pin0_cfg___slave_mode___width 3 +#define reg_bif_dma_rw_pin0_cfg_offset 160 + +/* Register rw_pin1_cfg, scope bif_dma, type rw */ +#define reg_bif_dma_rw_pin1_cfg___master_ch___lsb 0 +#define reg_bif_dma_rw_pin1_cfg___master_ch___width 2 +#define reg_bif_dma_rw_pin1_cfg___master_mode___lsb 2 +#define reg_bif_dma_rw_pin1_cfg___master_mode___width 3 +#define reg_bif_dma_rw_pin1_cfg___slave_ch___lsb 5 +#define reg_bif_dma_rw_pin1_cfg___slave_ch___width 2 +#define reg_bif_dma_rw_pin1_cfg___slave_mode___lsb 7 +#define reg_bif_dma_rw_pin1_cfg___slave_mode___width 3 +#define reg_bif_dma_rw_pin1_cfg_offset 164 + +/* Register rw_pin2_cfg, scope bif_dma, type rw */ +#define reg_bif_dma_rw_pin2_cfg___master_ch___lsb 0 +#define reg_bif_dma_rw_pin2_cfg___master_ch___width 2 +#define reg_bif_dma_rw_pin2_cfg___master_mode___lsb 2 +#define reg_bif_dma_rw_pin2_cfg___master_mode___width 3 +#define reg_bif_dma_rw_pin2_cfg___slave_ch___lsb 5 +#define reg_bif_dma_rw_pin2_cfg___slave_ch___width 2 +#define reg_bif_dma_rw_pin2_cfg___slave_mode___lsb 7 +#define reg_bif_dma_rw_pin2_cfg___slave_mode___width 3 +#define reg_bif_dma_rw_pin2_cfg_offset 168 + +/* Register rw_pin3_cfg, scope bif_dma, type rw */ +#define reg_bif_dma_rw_pin3_cfg___master_ch___lsb 0 +#define reg_bif_dma_rw_pin3_cfg___master_ch___width 2 +#define reg_bif_dma_rw_pin3_cfg___master_mode___lsb 2 +#define reg_bif_dma_rw_pin3_cfg___master_mode___width 3 +#define reg_bif_dma_rw_pin3_cfg___slave_ch___lsb 5 +#define reg_bif_dma_rw_pin3_cfg___slave_ch___width 2 +#define reg_bif_dma_rw_pin3_cfg___slave_mode___lsb 7 +#define reg_bif_dma_rw_pin3_cfg___slave_mode___width 3 +#define reg_bif_dma_rw_pin3_cfg_offset 172 + +/* Register rw_pin4_cfg, scope bif_dma, type rw */ +#define reg_bif_dma_rw_pin4_cfg___master_ch___lsb 0 +#define reg_bif_dma_rw_pin4_cfg___master_ch___width 2 +#define reg_bif_dma_rw_pin4_cfg___master_mode___lsb 2 +#define reg_bif_dma_rw_pin4_cfg___master_mode___width 3 +#define reg_bif_dma_rw_pin4_cfg___slave_ch___lsb 5 +#define reg_bif_dma_rw_pin4_cfg___slave_ch___width 2 +#define reg_bif_dma_rw_pin4_cfg___slave_mode___lsb 7 +#define reg_bif_dma_rw_pin4_cfg___slave_mode___width 3 +#define reg_bif_dma_rw_pin4_cfg_offset 176 + +/* Register rw_pin5_cfg, scope bif_dma, type rw */ +#define reg_bif_dma_rw_pin5_cfg___master_ch___lsb 0 +#define reg_bif_dma_rw_pin5_cfg___master_ch___width 2 +#define reg_bif_dma_rw_pin5_cfg___master_mode___lsb 2 +#define reg_bif_dma_rw_pin5_cfg___master_mode___width 3 +#define reg_bif_dma_rw_pin5_cfg___slave_ch___lsb 5 +#define reg_bif_dma_rw_pin5_cfg___slave_ch___width 2 +#define reg_bif_dma_rw_pin5_cfg___slave_mode___lsb 7 +#define reg_bif_dma_rw_pin5_cfg___slave_mode___width 3 +#define reg_bif_dma_rw_pin5_cfg_offset 180 + +/* Register rw_pin6_cfg, scope bif_dma, type rw */ +#define reg_bif_dma_rw_pin6_cfg___master_ch___lsb 0 +#define reg_bif_dma_rw_pin6_cfg___master_ch___width 2 +#define reg_bif_dma_rw_pin6_cfg___master_mode___lsb 2 +#define reg_bif_dma_rw_pin6_cfg___master_mode___width 3 +#define reg_bif_dma_rw_pin6_cfg___slave_ch___lsb 5 +#define reg_bif_dma_rw_pin6_cfg___slave_ch___width 2 +#define reg_bif_dma_rw_pin6_cfg___slave_mode___lsb 7 +#define reg_bif_dma_rw_pin6_cfg___slave_mode___width 3 +#define reg_bif_dma_rw_pin6_cfg_offset 184 + +/* Register rw_pin7_cfg, scope bif_dma, type rw */ +#define reg_bif_dma_rw_pin7_cfg___master_ch___lsb 0 +#define reg_bif_dma_rw_pin7_cfg___master_ch___width 2 +#define reg_bif_dma_rw_pin7_cfg___master_mode___lsb 2 +#define reg_bif_dma_rw_pin7_cfg___master_mode___width 3 +#define reg_bif_dma_rw_pin7_cfg___slave_ch___lsb 5 +#define reg_bif_dma_rw_pin7_cfg___slave_ch___width 2 +#define reg_bif_dma_rw_pin7_cfg___slave_mode___lsb 7 +#define reg_bif_dma_rw_pin7_cfg___slave_mode___width 3 +#define reg_bif_dma_rw_pin7_cfg_offset 188 + +/* Register r_pin_stat, scope bif_dma, type r */ +#define reg_bif_dma_r_pin_stat___pin0___lsb 0 +#define reg_bif_dma_r_pin_stat___pin0___width 1 +#define reg_bif_dma_r_pin_stat___pin0___bit 0 +#define reg_bif_dma_r_pin_stat___pin1___lsb 1 +#define reg_bif_dma_r_pin_stat___pin1___width 1 +#define reg_bif_dma_r_pin_stat___pin1___bit 1 +#define reg_bif_dma_r_pin_stat___pin2___lsb 2 +#define reg_bif_dma_r_pin_stat___pin2___width 1 +#define reg_bif_dma_r_pin_stat___pin2___bit 2 +#define reg_bif_dma_r_pin_stat___pin3___lsb 3 +#define reg_bif_dma_r_pin_stat___pin3___width 1 +#define reg_bif_dma_r_pin_stat___pin3___bit 3 +#define reg_bif_dma_r_pin_stat___pin4___lsb 4 +#define reg_bif_dma_r_pin_stat___pin4___width 1 +#define reg_bif_dma_r_pin_stat___pin4___bit 4 +#define reg_bif_dma_r_pin_stat___pin5___lsb 5 +#define reg_bif_dma_r_pin_stat___pin5___width 1 +#define reg_bif_dma_r_pin_stat___pin5___bit 5 +#define reg_bif_dma_r_pin_stat___pin6___lsb 6 +#define reg_bif_dma_r_pin_stat___pin6___width 1 +#define reg_bif_dma_r_pin_stat___pin6___bit 6 +#define reg_bif_dma_r_pin_stat___pin7___lsb 7 +#define reg_bif_dma_r_pin_stat___pin7___width 1 +#define reg_bif_dma_r_pin_stat___pin7___bit 7 +#define reg_bif_dma_r_pin_stat_offset 192 + + +/* Constants */ +#define regk_bif_dma_as_master 0x00000001 +#define regk_bif_dma_as_slave 0x00000001 +#define regk_bif_dma_burst1 0x00000000 +#define regk_bif_dma_burst8 0x00000001 +#define regk_bif_dma_bw16 0x00000001 +#define regk_bif_dma_bw32 0x00000002 +#define regk_bif_dma_bw8 0x00000000 +#define regk_bif_dma_dack 0x00000006 +#define regk_bif_dma_dack_inv 0x00000007 +#define regk_bif_dma_force 0x00000001 +#define regk_bif_dma_hi 0x00000003 +#define regk_bif_dma_inv 0x00000003 +#define regk_bif_dma_lo 0x00000002 +#define regk_bif_dma_master 0x00000001 +#define regk_bif_dma_no 0x00000000 +#define regk_bif_dma_norm 0x00000002 +#define regk_bif_dma_off 0x00000000 +#define regk_bif_dma_rw_ch0_ctrl_default 0x00000000 +#define regk_bif_dma_rw_ch0_start_default 0x00000000 +#define regk_bif_dma_rw_ch1_ctrl_default 0x00000000 +#define regk_bif_dma_rw_ch1_start_default 0x00000000 +#define regk_bif_dma_rw_ch2_ctrl_default 0x00000000 +#define regk_bif_dma_rw_ch2_start_default 0x00000000 +#define regk_bif_dma_rw_ch3_ctrl_default 0x00000000 +#define regk_bif_dma_rw_ch3_start_default 0x00000000 +#define regk_bif_dma_rw_intr_mask_default 0x00000000 +#define regk_bif_dma_rw_pin0_cfg_default 0x00000000 +#define regk_bif_dma_rw_pin1_cfg_default 0x00000000 +#define regk_bif_dma_rw_pin2_cfg_default 0x00000000 +#define regk_bif_dma_rw_pin3_cfg_default 0x00000000 +#define regk_bif_dma_rw_pin4_cfg_default 0x00000000 +#define regk_bif_dma_rw_pin5_cfg_default 0x00000000 +#define regk_bif_dma_rw_pin6_cfg_default 0x00000000 +#define regk_bif_dma_rw_pin7_cfg_default 0x00000000 +#define regk_bif_dma_slave 0x00000002 +#define regk_bif_dma_sreq 0x00000006 +#define regk_bif_dma_sreq_inv 0x00000007 +#define regk_bif_dma_tc 0x00000004 +#define regk_bif_dma_tc_inv 0x00000005 +#define regk_bif_dma_yes 0x00000001 +#endif /* __bif_dma_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/bif_slave_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/bif_slave_defs_asm.h new file mode 100644 index 000000000000..031f33a365bb --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/bif_slave_defs_asm.h @@ -0,0 +1,249 @@ +#ifndef __bif_slave_defs_asm_h +#define __bif_slave_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_slave_regs.r + * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp + * last modfied: Mon Apr 11 16:06:34 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_slave_defs_asm.h ../../inst/bif/rtl/bif_slave_regs.r + * id: $Id: bif_slave_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_slave_cfg, scope bif_slave, type rw */ +#define reg_bif_slave_rw_slave_cfg___slave_id___lsb 0 +#define reg_bif_slave_rw_slave_cfg___slave_id___width 3 +#define reg_bif_slave_rw_slave_cfg___use_slave_id___lsb 3 +#define reg_bif_slave_rw_slave_cfg___use_slave_id___width 1 +#define reg_bif_slave_rw_slave_cfg___use_slave_id___bit 3 +#define reg_bif_slave_rw_slave_cfg___boot_rdy___lsb 4 +#define reg_bif_slave_rw_slave_cfg___boot_rdy___width 1 +#define reg_bif_slave_rw_slave_cfg___boot_rdy___bit 4 +#define reg_bif_slave_rw_slave_cfg___loopback___lsb 5 +#define reg_bif_slave_rw_slave_cfg___loopback___width 1 +#define reg_bif_slave_rw_slave_cfg___loopback___bit 5 +#define reg_bif_slave_rw_slave_cfg___dis___lsb 6 +#define reg_bif_slave_rw_slave_cfg___dis___width 1 +#define reg_bif_slave_rw_slave_cfg___dis___bit 6 +#define reg_bif_slave_rw_slave_cfg_offset 0 + +/* Register r_slave_mode, scope bif_slave, type r */ +#define reg_bif_slave_r_slave_mode___ch0_mode___lsb 0 +#define reg_bif_slave_r_slave_mode___ch0_mode___width 1 +#define reg_bif_slave_r_slave_mode___ch0_mode___bit 0 +#define reg_bif_slave_r_slave_mode___ch1_mode___lsb 1 +#define reg_bif_slave_r_slave_mode___ch1_mode___width 1 +#define reg_bif_slave_r_slave_mode___ch1_mode___bit 1 +#define reg_bif_slave_r_slave_mode___ch2_mode___lsb 2 +#define reg_bif_slave_r_slave_mode___ch2_mode___width 1 +#define reg_bif_slave_r_slave_mode___ch2_mode___bit 2 +#define reg_bif_slave_r_slave_mode___ch3_mode___lsb 3 +#define reg_bif_slave_r_slave_mode___ch3_mode___width 1 +#define reg_bif_slave_r_slave_mode___ch3_mode___bit 3 +#define reg_bif_slave_r_slave_mode_offset 4 + +/* Register rw_ch0_cfg, scope bif_slave, type rw */ +#define reg_bif_slave_rw_ch0_cfg___rd_hold___lsb 0 +#define reg_bif_slave_rw_ch0_cfg___rd_hold___width 2 +#define reg_bif_slave_rw_ch0_cfg___access_mode___lsb 2 +#define reg_bif_slave_rw_ch0_cfg___access_mode___width 1 +#define reg_bif_slave_rw_ch0_cfg___access_mode___bit 2 +#define reg_bif_slave_rw_ch0_cfg___access_ctrl___lsb 3 +#define reg_bif_slave_rw_ch0_cfg___access_ctrl___width 1 +#define reg_bif_slave_rw_ch0_cfg___access_ctrl___bit 3 +#define reg_bif_slave_rw_ch0_cfg___data_cs___lsb 4 +#define reg_bif_slave_rw_ch0_cfg___data_cs___width 2 +#define reg_bif_slave_rw_ch0_cfg_offset 16 + +/* Register rw_ch1_cfg, scope bif_slave, type rw */ +#define reg_bif_slave_rw_ch1_cfg___rd_hold___lsb 0 +#define reg_bif_slave_rw_ch1_cfg___rd_hold___width 2 +#define reg_bif_slave_rw_ch1_cfg___access_mode___lsb 2 +#define reg_bif_slave_rw_ch1_cfg___access_mode___width 1 +#define reg_bif_slave_rw_ch1_cfg___access_mode___bit 2 +#define reg_bif_slave_rw_ch1_cfg___access_ctrl___lsb 3 +#define reg_bif_slave_rw_ch1_cfg___access_ctrl___width 1 +#define reg_bif_slave_rw_ch1_cfg___access_ctrl___bit 3 +#define reg_bif_slave_rw_ch1_cfg___data_cs___lsb 4 +#define reg_bif_slave_rw_ch1_cfg___data_cs___width 2 +#define reg_bif_slave_rw_ch1_cfg_offset 20 + +/* Register rw_ch2_cfg, scope bif_slave, type rw */ +#define reg_bif_slave_rw_ch2_cfg___rd_hold___lsb 0 +#define reg_bif_slave_rw_ch2_cfg___rd_hold___width 2 +#define reg_bif_slave_rw_ch2_cfg___access_mode___lsb 2 +#define reg_bif_slave_rw_ch2_cfg___access_mode___width 1 +#define reg_bif_slave_rw_ch2_cfg___access_mode___bit 2 +#define reg_bif_slave_rw_ch2_cfg___access_ctrl___lsb 3 +#define reg_bif_slave_rw_ch2_cfg___access_ctrl___width 1 +#define reg_bif_slave_rw_ch2_cfg___access_ctrl___bit 3 +#define reg_bif_slave_rw_ch2_cfg___data_cs___lsb 4 +#define reg_bif_slave_rw_ch2_cfg___data_cs___width 2 +#define reg_bif_slave_rw_ch2_cfg_offset 24 + +/* Register rw_ch3_cfg, scope bif_slave, type rw */ +#define reg_bif_slave_rw_ch3_cfg___rd_hold___lsb 0 +#define reg_bif_slave_rw_ch3_cfg___rd_hold___width 2 +#define reg_bif_slave_rw_ch3_cfg___access_mode___lsb 2 +#define reg_bif_slave_rw_ch3_cfg___access_mode___width 1 +#define reg_bif_slave_rw_ch3_cfg___access_mode___bit 2 +#define reg_bif_slave_rw_ch3_cfg___access_ctrl___lsb 3 +#define reg_bif_slave_rw_ch3_cfg___access_ctrl___width 1 +#define reg_bif_slave_rw_ch3_cfg___access_ctrl___bit 3 +#define reg_bif_slave_rw_ch3_cfg___data_cs___lsb 4 +#define reg_bif_slave_rw_ch3_cfg___data_cs___width 2 +#define reg_bif_slave_rw_ch3_cfg_offset 28 + +/* Register rw_arb_cfg, scope bif_slave, type rw */ +#define reg_bif_slave_rw_arb_cfg___brin_mode___lsb 0 +#define reg_bif_slave_rw_arb_cfg___brin_mode___width 1 +#define reg_bif_slave_rw_arb_cfg___brin_mode___bit 0 +#define reg_bif_slave_rw_arb_cfg___brout_mode___lsb 1 +#define reg_bif_slave_rw_arb_cfg___brout_mode___width 3 +#define reg_bif_slave_rw_arb_cfg___bg_mode___lsb 4 +#define reg_bif_slave_rw_arb_cfg___bg_mode___width 3 +#define reg_bif_slave_rw_arb_cfg___release___lsb 7 +#define reg_bif_slave_rw_arb_cfg___release___width 2 +#define reg_bif_slave_rw_arb_cfg___acquire___lsb 9 +#define reg_bif_slave_rw_arb_cfg___acquire___width 1 +#define reg_bif_slave_rw_arb_cfg___acquire___bit 9 +#define reg_bif_slave_rw_arb_cfg___settle_time___lsb 10 +#define reg_bif_slave_rw_arb_cfg___settle_time___width 2 +#define reg_bif_slave_rw_arb_cfg___dram_ctrl___lsb 12 +#define reg_bif_slave_rw_arb_cfg___dram_ctrl___width 1 +#define reg_bif_slave_rw_arb_cfg___dram_ctrl___bit 12 +#define reg_bif_slave_rw_arb_cfg_offset 32 + +/* Register r_arb_stat, scope bif_slave, type r */ +#define reg_bif_slave_r_arb_stat___init_mode___lsb 0 +#define reg_bif_slave_r_arb_stat___init_mode___width 1 +#define reg_bif_slave_r_arb_stat___init_mode___bit 0 +#define reg_bif_slave_r_arb_stat___mode___lsb 1 +#define reg_bif_slave_r_arb_stat___mode___width 1 +#define reg_bif_slave_r_arb_stat___mode___bit 1 +#define reg_bif_slave_r_arb_stat___brin___lsb 2 +#define reg_bif_slave_r_arb_stat___brin___width 1 +#define reg_bif_slave_r_arb_stat___brin___bit 2 +#define reg_bif_slave_r_arb_stat___brout___lsb 3 +#define reg_bif_slave_r_arb_stat___brout___width 1 +#define reg_bif_slave_r_arb_stat___brout___bit 3 +#define reg_bif_slave_r_arb_stat___bg___lsb 4 +#define reg_bif_slave_r_arb_stat___bg___width 1 +#define reg_bif_slave_r_arb_stat___bg___bit 4 +#define reg_bif_slave_r_arb_stat_offset 36 + +/* Register rw_intr_mask, scope bif_slave, type rw */ +#define reg_bif_slave_rw_intr_mask___bus_release___lsb 0 +#define reg_bif_slave_rw_intr_mask___bus_release___width 1 +#define reg_bif_slave_rw_intr_mask___bus_release___bit 0 +#define reg_bif_slave_rw_intr_mask___bus_acquire___lsb 1 +#define reg_bif_slave_rw_intr_mask___bus_acquire___width 1 +#define reg_bif_slave_rw_intr_mask___bus_acquire___bit 1 +#define reg_bif_slave_rw_intr_mask_offset 64 + +/* Register rw_ack_intr, scope bif_slave, type rw */ +#define reg_bif_slave_rw_ack_intr___bus_release___lsb 0 +#define reg_bif_slave_rw_ack_intr___bus_release___width 1 +#define reg_bif_slave_rw_ack_intr___bus_release___bit 0 +#define reg_bif_slave_rw_ack_intr___bus_acquire___lsb 1 +#define reg_bif_slave_rw_ack_intr___bus_acquire___width 1 +#define reg_bif_slave_rw_ack_intr___bus_acquire___bit 1 +#define reg_bif_slave_rw_ack_intr_offset 68 + +/* Register r_intr, scope bif_slave, type r */ +#define reg_bif_slave_r_intr___bus_release___lsb 0 +#define reg_bif_slave_r_intr___bus_release___width 1 +#define reg_bif_slave_r_intr___bus_release___bit 0 +#define reg_bif_slave_r_intr___bus_acquire___lsb 1 +#define reg_bif_slave_r_intr___bus_acquire___width 1 +#define reg_bif_slave_r_intr___bus_acquire___bit 1 +#define reg_bif_slave_r_intr_offset 72 + +/* Register r_masked_intr, scope bif_slave, type r */ +#define reg_bif_slave_r_masked_intr___bus_release___lsb 0 +#define reg_bif_slave_r_masked_intr___bus_release___width 1 +#define reg_bif_slave_r_masked_intr___bus_release___bit 0 +#define reg_bif_slave_r_masked_intr___bus_acquire___lsb 1 +#define reg_bif_slave_r_masked_intr___bus_acquire___width 1 +#define reg_bif_slave_r_masked_intr___bus_acquire___bit 1 +#define reg_bif_slave_r_masked_intr_offset 76 + + +/* Constants */ +#define regk_bif_slave_active_hi 0x00000003 +#define regk_bif_slave_active_lo 0x00000002 +#define regk_bif_slave_addr 0x00000000 +#define regk_bif_slave_always 0x00000001 +#define regk_bif_slave_at_idle 0x00000002 +#define regk_bif_slave_burst_end 0x00000003 +#define regk_bif_slave_dma 0x00000001 +#define regk_bif_slave_hi 0x00000003 +#define regk_bif_slave_inv 0x00000001 +#define regk_bif_slave_lo 0x00000002 +#define regk_bif_slave_local 0x00000001 +#define regk_bif_slave_master 0x00000000 +#define regk_bif_slave_mode_reg 0x00000001 +#define regk_bif_slave_no 0x00000000 +#define regk_bif_slave_norm 0x00000000 +#define regk_bif_slave_on_access 0x00000000 +#define regk_bif_slave_rw_arb_cfg_default 0x00000000 +#define regk_bif_slave_rw_ch0_cfg_default 0x00000000 +#define regk_bif_slave_rw_ch1_cfg_default 0x00000000 +#define regk_bif_slave_rw_ch2_cfg_default 0x00000000 +#define regk_bif_slave_rw_ch3_cfg_default 0x00000000 +#define regk_bif_slave_rw_intr_mask_default 0x00000000 +#define regk_bif_slave_rw_slave_cfg_default 0x00000000 +#define regk_bif_slave_shared 0x00000000 +#define regk_bif_slave_slave 0x00000001 +#define regk_bif_slave_t0ns 0x00000003 +#define regk_bif_slave_t10ns 0x00000002 +#define regk_bif_slave_t20ns 0x00000003 +#define regk_bif_slave_t30ns 0x00000002 +#define regk_bif_slave_t40ns 0x00000001 +#define regk_bif_slave_t50ns 0x00000000 +#define regk_bif_slave_yes 0x00000001 +#define regk_bif_slave_z 0x00000004 +#endif /* __bif_slave_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/config_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/config_defs_asm.h new file mode 100644 index 000000000000..e98476332e1f --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/config_defs_asm.h @@ -0,0 +1,131 @@ +#ifndef __config_defs_asm_h +#define __config_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../rtl/config_regs.r + * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp + * last modfied: Thu Mar 4 12:34:39 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/config_defs_asm.h ../../rtl/config_regs.r + * id: $Id: config_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_bootsel, scope config, type r */ +#define reg_config_r_bootsel___boot_mode___lsb 0 +#define reg_config_r_bootsel___boot_mode___width 3 +#define reg_config_r_bootsel___full_duplex___lsb 3 +#define reg_config_r_bootsel___full_duplex___width 1 +#define reg_config_r_bootsel___full_duplex___bit 3 +#define reg_config_r_bootsel___user___lsb 4 +#define reg_config_r_bootsel___user___width 1 +#define reg_config_r_bootsel___user___bit 4 +#define reg_config_r_bootsel___pll___lsb 5 +#define reg_config_r_bootsel___pll___width 1 +#define reg_config_r_bootsel___pll___bit 5 +#define reg_config_r_bootsel___flash_bw___lsb 6 +#define reg_config_r_bootsel___flash_bw___width 1 +#define reg_config_r_bootsel___flash_bw___bit 6 +#define reg_config_r_bootsel_offset 0 + +/* Register rw_clk_ctrl, scope config, type rw */ +#define reg_config_rw_clk_ctrl___pll___lsb 0 +#define reg_config_rw_clk_ctrl___pll___width 1 +#define reg_config_rw_clk_ctrl___pll___bit 0 +#define reg_config_rw_clk_ctrl___cpu___lsb 1 +#define reg_config_rw_clk_ctrl___cpu___width 1 +#define reg_config_rw_clk_ctrl___cpu___bit 1 +#define reg_config_rw_clk_ctrl___iop___lsb 2 +#define reg_config_rw_clk_ctrl___iop___width 1 +#define reg_config_rw_clk_ctrl___iop___bit 2 +#define reg_config_rw_clk_ctrl___dma01_eth0___lsb 3 +#define reg_config_rw_clk_ctrl___dma01_eth0___width 1 +#define reg_config_rw_clk_ctrl___dma01_eth0___bit 3 +#define reg_config_rw_clk_ctrl___dma23___lsb 4 +#define reg_config_rw_clk_ctrl___dma23___width 1 +#define reg_config_rw_clk_ctrl___dma23___bit 4 +#define reg_config_rw_clk_ctrl___dma45___lsb 5 +#define reg_config_rw_clk_ctrl___dma45___width 1 +#define reg_config_rw_clk_ctrl___dma45___bit 5 +#define reg_config_rw_clk_ctrl___dma67___lsb 6 +#define reg_config_rw_clk_ctrl___dma67___width 1 +#define reg_config_rw_clk_ctrl___dma67___bit 6 +#define reg_config_rw_clk_ctrl___dma89_strcop___lsb 7 +#define reg_config_rw_clk_ctrl___dma89_strcop___width 1 +#define reg_config_rw_clk_ctrl___dma89_strcop___bit 7 +#define reg_config_rw_clk_ctrl___bif___lsb 8 +#define reg_config_rw_clk_ctrl___bif___width 1 +#define reg_config_rw_clk_ctrl___bif___bit 8 +#define reg_config_rw_clk_ctrl___fix_io___lsb 9 +#define reg_config_rw_clk_ctrl___fix_io___width 1 +#define reg_config_rw_clk_ctrl___fix_io___bit 9 +#define reg_config_rw_clk_ctrl_offset 4 + +/* Register rw_pad_ctrl, scope config, type rw */ +#define reg_config_rw_pad_ctrl___usb_susp___lsb 0 +#define reg_config_rw_pad_ctrl___usb_susp___width 1 +#define reg_config_rw_pad_ctrl___usb_susp___bit 0 +#define reg_config_rw_pad_ctrl___phyrst_n___lsb 1 +#define reg_config_rw_pad_ctrl___phyrst_n___width 1 +#define reg_config_rw_pad_ctrl___phyrst_n___bit 1 +#define reg_config_rw_pad_ctrl_offset 8 + + +/* Constants */ +#define regk_config_bw16 0x00000000 +#define regk_config_bw32 0x00000001 +#define regk_config_master 0x00000005 +#define regk_config_nand 0x00000003 +#define regk_config_net_rx 0x00000001 +#define regk_config_net_tx_rx 0x00000002 +#define regk_config_no 0x00000000 +#define regk_config_none 0x00000007 +#define regk_config_nor 0x00000000 +#define regk_config_rw_clk_ctrl_default 0x00000002 +#define regk_config_rw_pad_ctrl_default 0x00000000 +#define regk_config_ser 0x00000004 +#define regk_config_slave 0x00000006 +#define regk_config_yes 0x00000001 +#endif /* __config_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/cpu_vect.h b/arch/cris/include/arch-v32/arch/hwregs/asm/cpu_vect.h new file mode 100644 index 000000000000..8370aee8a14a --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/cpu_vect.h @@ -0,0 +1,41 @@ +/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version + from ../../inst/crisp/doc/cpu_vect.r +version . */ + +#ifndef _______INST_CRISP_DOC_CPU_VECT_R +#define _______INST_CRISP_DOC_CPU_VECT_R +#define NMI_INTR_VECT 0x00 +#define RESERVED_1_INTR_VECT 0x01 +#define RESERVED_2_INTR_VECT 0x02 +#define SINGLE_STEP_INTR_VECT 0x03 +#define INSTR_TLB_REFILL_INTR_VECT 0x04 +#define INSTR_TLB_INV_INTR_VECT 0x05 +#define INSTR_TLB_ACC_INTR_VECT 0x06 +#define TLB_EX_INTR_VECT 0x07 +#define DATA_TLB_REFILL_INTR_VECT 0x08 +#define DATA_TLB_INV_INTR_VECT 0x09 +#define DATA_TLB_ACC_INTR_VECT 0x0a +#define DATA_TLB_WE_INTR_VECT 0x0b +#define HW_BP_INTR_VECT 0x0c +#define RESERVED_D_INTR_VECT 0x0d +#define RESERVED_E_INTR_VECT 0x0e +#define RESERVED_F_INTR_VECT 0x0f +#define BREAK_0_INTR_VECT 0x10 +#define BREAK_1_INTR_VECT 0x11 +#define BREAK_2_INTR_VECT 0x12 +#define BREAK_3_INTR_VECT 0x13 +#define BREAK_4_INTR_VECT 0x14 +#define BREAK_5_INTR_VECT 0x15 +#define BREAK_6_INTR_VECT 0x16 +#define BREAK_7_INTR_VECT 0x17 +#define BREAK_8_INTR_VECT 0x18 +#define BREAK_9_INTR_VECT 0x19 +#define BREAK_10_INTR_VECT 0x1a +#define BREAK_11_INTR_VECT 0x1b +#define BREAK_12_INTR_VECT 0x1c +#define BREAK_13_INTR_VECT 0x1d +#define BREAK_14_INTR_VECT 0x1e +#define BREAK_15_INTR_VECT 0x1f +#define MULTIPLE_INTR_VECT 0x30 + +#endif diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/cris_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/cris_defs_asm.h new file mode 100644 index 000000000000..7f768db272e2 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/cris_defs_asm.h @@ -0,0 +1,114 @@ +#ifndef __cris_defs_asm_h +#define __cris_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/crisp/doc/cris.r + * id: cris.r,v 1.6 2004/05/05 07:41:12 perz Exp + * last modfied: Mon Apr 11 16:06:39 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/cris_defs_asm.h ../../inst/crisp/doc/cris.r + * id: $Id: cris_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_gc_cfg, scope cris, type rw */ +#define reg_cris_rw_gc_cfg___ic___lsb 0 +#define reg_cris_rw_gc_cfg___ic___width 1 +#define reg_cris_rw_gc_cfg___ic___bit 0 +#define reg_cris_rw_gc_cfg___dc___lsb 1 +#define reg_cris_rw_gc_cfg___dc___width 1 +#define reg_cris_rw_gc_cfg___dc___bit 1 +#define reg_cris_rw_gc_cfg___im___lsb 2 +#define reg_cris_rw_gc_cfg___im___width 1 +#define reg_cris_rw_gc_cfg___im___bit 2 +#define reg_cris_rw_gc_cfg___dm___lsb 3 +#define reg_cris_rw_gc_cfg___dm___width 1 +#define reg_cris_rw_gc_cfg___dm___bit 3 +#define reg_cris_rw_gc_cfg___gb___lsb 4 +#define reg_cris_rw_gc_cfg___gb___width 1 +#define reg_cris_rw_gc_cfg___gb___bit 4 +#define reg_cris_rw_gc_cfg___gk___lsb 5 +#define reg_cris_rw_gc_cfg___gk___width 1 +#define reg_cris_rw_gc_cfg___gk___bit 5 +#define reg_cris_rw_gc_cfg___gp___lsb 6 +#define reg_cris_rw_gc_cfg___gp___width 1 +#define reg_cris_rw_gc_cfg___gp___bit 6 +#define reg_cris_rw_gc_cfg_offset 0 + +/* Register rw_gc_ccs, scope cris, type rw */ +#define reg_cris_rw_gc_ccs_offset 4 + +/* Register rw_gc_srs, scope cris, type rw */ +#define reg_cris_rw_gc_srs___srs___lsb 0 +#define reg_cris_rw_gc_srs___srs___width 8 +#define reg_cris_rw_gc_srs_offset 8 + +/* Register rw_gc_nrp, scope cris, type rw */ +#define reg_cris_rw_gc_nrp_offset 12 + +/* Register rw_gc_exs, scope cris, type rw */ +#define reg_cris_rw_gc_exs_offset 16 + +/* Register rw_gc_eda, scope cris, type rw */ +#define reg_cris_rw_gc_eda_offset 20 + +/* Register rw_gc_r0, scope cris, type rw */ +#define reg_cris_rw_gc_r0_offset 32 + +/* Register rw_gc_r1, scope cris, type rw */ +#define reg_cris_rw_gc_r1_offset 36 + +/* Register rw_gc_r2, scope cris, type rw */ +#define reg_cris_rw_gc_r2_offset 40 + +/* Register rw_gc_r3, scope cris, type rw */ +#define reg_cris_rw_gc_r3_offset 44 + + +/* Constants */ +#define regk_cris_no 0x00000000 +#define regk_cris_rw_gc_cfg_default 0x00000000 +#define regk_cris_yes 0x00000001 +#endif /* __cris_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/cris_supp_reg.h b/arch/cris/include/arch-v32/arch/hwregs/asm/cris_supp_reg.h new file mode 100644 index 000000000000..7d3689a6f80d --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/cris_supp_reg.h @@ -0,0 +1,10 @@ +#define RW_GC_CFG 0 +#define RW_GC_CCS 1 +#define RW_GC_SRS 2 +#define RW_GC_NRP 3 +#define RW_GC_EXS 4 +#define RW_GC_EDA 5 +#define RW_GC_R0 8 +#define RW_GC_R1 9 +#define RW_GC_R2 10 +#define RW_GC_R3 11 diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/dma_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/dma_defs_asm.h new file mode 100644 index 000000000000..0cb71bc127ae --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/dma_defs_asm.h @@ -0,0 +1,368 @@ +#ifndef __dma_defs_asm_h +#define __dma_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/dma/inst/dma_common/rtl/dma_regdes.r + * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp + * last modfied: Mon Apr 11 16:06:51 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/dma_defs_asm.h ../../inst/dma/inst/dma_common/rtl/dma_regdes.r + * id: $Id: dma_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_data, scope dma, type rw */ +#define reg_dma_rw_data_offset 0 + +/* Register rw_data_next, scope dma, type rw */ +#define reg_dma_rw_data_next_offset 4 + +/* Register rw_data_buf, scope dma, type rw */ +#define reg_dma_rw_data_buf_offset 8 + +/* Register rw_data_ctrl, scope dma, type rw */ +#define reg_dma_rw_data_ctrl___eol___lsb 0 +#define reg_dma_rw_data_ctrl___eol___width 1 +#define reg_dma_rw_data_ctrl___eol___bit 0 +#define reg_dma_rw_data_ctrl___out_eop___lsb 3 +#define reg_dma_rw_data_ctrl___out_eop___width 1 +#define reg_dma_rw_data_ctrl___out_eop___bit 3 +#define reg_dma_rw_data_ctrl___intr___lsb 4 +#define reg_dma_rw_data_ctrl___intr___width 1 +#define reg_dma_rw_data_ctrl___intr___bit 4 +#define reg_dma_rw_data_ctrl___wait___lsb 5 +#define reg_dma_rw_data_ctrl___wait___width 1 +#define reg_dma_rw_data_ctrl___wait___bit 5 +#define reg_dma_rw_data_ctrl_offset 12 + +/* Register rw_data_stat, scope dma, type rw */ +#define reg_dma_rw_data_stat___in_eop___lsb 3 +#define reg_dma_rw_data_stat___in_eop___width 1 +#define reg_dma_rw_data_stat___in_eop___bit 3 +#define reg_dma_rw_data_stat_offset 16 + +/* Register rw_data_md, scope dma, type rw */ +#define reg_dma_rw_data_md___md___lsb 0 +#define reg_dma_rw_data_md___md___width 16 +#define reg_dma_rw_data_md_offset 20 + +/* Register rw_data_md_s, scope dma, type rw */ +#define reg_dma_rw_data_md_s___md_s___lsb 0 +#define reg_dma_rw_data_md_s___md_s___width 16 +#define reg_dma_rw_data_md_s_offset 24 + +/* Register rw_data_after, scope dma, type rw */ +#define reg_dma_rw_data_after_offset 28 + +/* Register rw_ctxt, scope dma, type rw */ +#define reg_dma_rw_ctxt_offset 32 + +/* Register rw_ctxt_next, scope dma, type rw */ +#define reg_dma_rw_ctxt_next_offset 36 + +/* Register rw_ctxt_ctrl, scope dma, type rw */ +#define reg_dma_rw_ctxt_ctrl___eol___lsb 0 +#define reg_dma_rw_ctxt_ctrl___eol___width 1 +#define reg_dma_rw_ctxt_ctrl___eol___bit 0 +#define reg_dma_rw_ctxt_ctrl___intr___lsb 4 +#define reg_dma_rw_ctxt_ctrl___intr___width 1 +#define reg_dma_rw_ctxt_ctrl___intr___bit 4 +#define reg_dma_rw_ctxt_ctrl___store_mode___lsb 6 +#define reg_dma_rw_ctxt_ctrl___store_mode___width 1 +#define reg_dma_rw_ctxt_ctrl___store_mode___bit 6 +#define reg_dma_rw_ctxt_ctrl___en___lsb 7 +#define reg_dma_rw_ctxt_ctrl___en___width 1 +#define reg_dma_rw_ctxt_ctrl___en___bit 7 +#define reg_dma_rw_ctxt_ctrl_offset 40 + +/* Register rw_ctxt_stat, scope dma, type rw */ +#define reg_dma_rw_ctxt_stat___dis___lsb 7 +#define reg_dma_rw_ctxt_stat___dis___width 1 +#define reg_dma_rw_ctxt_stat___dis___bit 7 +#define reg_dma_rw_ctxt_stat_offset 44 + +/* Register rw_ctxt_md0, scope dma, type rw */ +#define reg_dma_rw_ctxt_md0___md0___lsb 0 +#define reg_dma_rw_ctxt_md0___md0___width 16 +#define reg_dma_rw_ctxt_md0_offset 48 + +/* Register rw_ctxt_md0_s, scope dma, type rw */ +#define reg_dma_rw_ctxt_md0_s___md0_s___lsb 0 +#define reg_dma_rw_ctxt_md0_s___md0_s___width 16 +#define reg_dma_rw_ctxt_md0_s_offset 52 + +/* Register rw_ctxt_md1, scope dma, type rw */ +#define reg_dma_rw_ctxt_md1_offset 56 + +/* Register rw_ctxt_md1_s, scope dma, type rw */ +#define reg_dma_rw_ctxt_md1_s_offset 60 + +/* Register rw_ctxt_md2, scope dma, type rw */ +#define reg_dma_rw_ctxt_md2_offset 64 + +/* Register rw_ctxt_md2_s, scope dma, type rw */ +#define reg_dma_rw_ctxt_md2_s_offset 68 + +/* Register rw_ctxt_md3, scope dma, type rw */ +#define reg_dma_rw_ctxt_md3_offset 72 + +/* Register rw_ctxt_md3_s, scope dma, type rw */ +#define reg_dma_rw_ctxt_md3_s_offset 76 + +/* Register rw_ctxt_md4, scope dma, type rw */ +#define reg_dma_rw_ctxt_md4_offset 80 + +/* Register rw_ctxt_md4_s, scope dma, type rw */ +#define reg_dma_rw_ctxt_md4_s_offset 84 + +/* Register rw_saved_data, scope dma, type rw */ +#define reg_dma_rw_saved_data_offset 88 + +/* Register rw_saved_data_buf, scope dma, type rw */ +#define reg_dma_rw_saved_data_buf_offset 92 + +/* Register rw_group, scope dma, type rw */ +#define reg_dma_rw_group_offset 96 + +/* Register rw_group_next, scope dma, type rw */ +#define reg_dma_rw_group_next_offset 100 + +/* Register rw_group_ctrl, scope dma, type rw */ +#define reg_dma_rw_group_ctrl___eol___lsb 0 +#define reg_dma_rw_group_ctrl___eol___width 1 +#define reg_dma_rw_group_ctrl___eol___bit 0 +#define reg_dma_rw_group_ctrl___tol___lsb 1 +#define reg_dma_rw_group_ctrl___tol___width 1 +#define reg_dma_rw_group_ctrl___tol___bit 1 +#define reg_dma_rw_group_ctrl___bol___lsb 2 +#define reg_dma_rw_group_ctrl___bol___width 1 +#define reg_dma_rw_group_ctrl___bol___bit 2 +#define reg_dma_rw_group_ctrl___intr___lsb 4 +#define reg_dma_rw_group_ctrl___intr___width 1 +#define reg_dma_rw_group_ctrl___intr___bit 4 +#define reg_dma_rw_group_ctrl___en___lsb 7 +#define reg_dma_rw_group_ctrl___en___width 1 +#define reg_dma_rw_group_ctrl___en___bit 7 +#define reg_dma_rw_group_ctrl_offset 104 + +/* Register rw_group_stat, scope dma, type rw */ +#define reg_dma_rw_group_stat___dis___lsb 7 +#define reg_dma_rw_group_stat___dis___width 1 +#define reg_dma_rw_group_stat___dis___bit 7 +#define reg_dma_rw_group_stat_offset 108 + +/* Register rw_group_md, scope dma, type rw */ +#define reg_dma_rw_group_md___md___lsb 0 +#define reg_dma_rw_group_md___md___width 16 +#define reg_dma_rw_group_md_offset 112 + +/* Register rw_group_md_s, scope dma, type rw */ +#define reg_dma_rw_group_md_s___md_s___lsb 0 +#define reg_dma_rw_group_md_s___md_s___width 16 +#define reg_dma_rw_group_md_s_offset 116 + +/* Register rw_group_up, scope dma, type rw */ +#define reg_dma_rw_group_up_offset 120 + +/* Register rw_group_down, scope dma, type rw */ +#define reg_dma_rw_group_down_offset 124 + +/* Register rw_cmd, scope dma, type rw */ +#define reg_dma_rw_cmd___cont_data___lsb 0 +#define reg_dma_rw_cmd___cont_data___width 1 +#define reg_dma_rw_cmd___cont_data___bit 0 +#define reg_dma_rw_cmd_offset 128 + +/* Register rw_cfg, scope dma, type rw */ +#define reg_dma_rw_cfg___en___lsb 0 +#define reg_dma_rw_cfg___en___width 1 +#define reg_dma_rw_cfg___en___bit 0 +#define reg_dma_rw_cfg___stop___lsb 1 +#define reg_dma_rw_cfg___stop___width 1 +#define reg_dma_rw_cfg___stop___bit 1 +#define reg_dma_rw_cfg_offset 132 + +/* Register rw_stat, scope dma, type rw */ +#define reg_dma_rw_stat___mode___lsb 0 +#define reg_dma_rw_stat___mode___width 5 +#define reg_dma_rw_stat___list_state___lsb 5 +#define reg_dma_rw_stat___list_state___width 3 +#define reg_dma_rw_stat___stream_cmd_src___lsb 8 +#define reg_dma_rw_stat___stream_cmd_src___width 8 +#define reg_dma_rw_stat___buf___lsb 24 +#define reg_dma_rw_stat___buf___width 8 +#define reg_dma_rw_stat_offset 136 + +/* Register rw_intr_mask, scope dma, type rw */ +#define reg_dma_rw_intr_mask___group___lsb 0 +#define reg_dma_rw_intr_mask___group___width 1 +#define reg_dma_rw_intr_mask___group___bit 0 +#define reg_dma_rw_intr_mask___ctxt___lsb 1 +#define reg_dma_rw_intr_mask___ctxt___width 1 +#define reg_dma_rw_intr_mask___ctxt___bit 1 +#define reg_dma_rw_intr_mask___data___lsb 2 +#define reg_dma_rw_intr_mask___data___width 1 +#define reg_dma_rw_intr_mask___data___bit 2 +#define reg_dma_rw_intr_mask___in_eop___lsb 3 +#define reg_dma_rw_intr_mask___in_eop___width 1 +#define reg_dma_rw_intr_mask___in_eop___bit 3 +#define reg_dma_rw_intr_mask___stream_cmd___lsb 4 +#define reg_dma_rw_intr_mask___stream_cmd___width 1 +#define reg_dma_rw_intr_mask___stream_cmd___bit 4 +#define reg_dma_rw_intr_mask_offset 140 + +/* Register rw_ack_intr, scope dma, type rw */ +#define reg_dma_rw_ack_intr___group___lsb 0 +#define reg_dma_rw_ack_intr___group___width 1 +#define reg_dma_rw_ack_intr___group___bit 0 +#define reg_dma_rw_ack_intr___ctxt___lsb 1 +#define reg_dma_rw_ack_intr___ctxt___width 1 +#define reg_dma_rw_ack_intr___ctxt___bit 1 +#define reg_dma_rw_ack_intr___data___lsb 2 +#define reg_dma_rw_ack_intr___data___width 1 +#define reg_dma_rw_ack_intr___data___bit 2 +#define reg_dma_rw_ack_intr___in_eop___lsb 3 +#define reg_dma_rw_ack_intr___in_eop___width 1 +#define reg_dma_rw_ack_intr___in_eop___bit 3 +#define reg_dma_rw_ack_intr___stream_cmd___lsb 4 +#define reg_dma_rw_ack_intr___stream_cmd___width 1 +#define reg_dma_rw_ack_intr___stream_cmd___bit 4 +#define reg_dma_rw_ack_intr_offset 144 + +/* Register r_intr, scope dma, type r */ +#define reg_dma_r_intr___group___lsb 0 +#define reg_dma_r_intr___group___width 1 +#define reg_dma_r_intr___group___bit 0 +#define reg_dma_r_intr___ctxt___lsb 1 +#define reg_dma_r_intr___ctxt___width 1 +#define reg_dma_r_intr___ctxt___bit 1 +#define reg_dma_r_intr___data___lsb 2 +#define reg_dma_r_intr___data___width 1 +#define reg_dma_r_intr___data___bit 2 +#define reg_dma_r_intr___in_eop___lsb 3 +#define reg_dma_r_intr___in_eop___width 1 +#define reg_dma_r_intr___in_eop___bit 3 +#define reg_dma_r_intr___stream_cmd___lsb 4 +#define reg_dma_r_intr___stream_cmd___width 1 +#define reg_dma_r_intr___stream_cmd___bit 4 +#define reg_dma_r_intr_offset 148 + +/* Register r_masked_intr, scope dma, type r */ +#define reg_dma_r_masked_intr___group___lsb 0 +#define reg_dma_r_masked_intr___group___width 1 +#define reg_dma_r_masked_intr___group___bit 0 +#define reg_dma_r_masked_intr___ctxt___lsb 1 +#define reg_dma_r_masked_intr___ctxt___width 1 +#define reg_dma_r_masked_intr___ctxt___bit 1 +#define reg_dma_r_masked_intr___data___lsb 2 +#define reg_dma_r_masked_intr___data___width 1 +#define reg_dma_r_masked_intr___data___bit 2 +#define reg_dma_r_masked_intr___in_eop___lsb 3 +#define reg_dma_r_masked_intr___in_eop___width 1 +#define reg_dma_r_masked_intr___in_eop___bit 3 +#define reg_dma_r_masked_intr___stream_cmd___lsb 4 +#define reg_dma_r_masked_intr___stream_cmd___width 1 +#define reg_dma_r_masked_intr___stream_cmd___bit 4 +#define reg_dma_r_masked_intr_offset 152 + +/* Register rw_stream_cmd, scope dma, type rw */ +#define reg_dma_rw_stream_cmd___cmd___lsb 0 +#define reg_dma_rw_stream_cmd___cmd___width 10 +#define reg_dma_rw_stream_cmd___n___lsb 16 +#define reg_dma_rw_stream_cmd___n___width 8 +#define reg_dma_rw_stream_cmd___busy___lsb 31 +#define reg_dma_rw_stream_cmd___busy___width 1 +#define reg_dma_rw_stream_cmd___busy___bit 31 +#define reg_dma_rw_stream_cmd_offset 156 + + +/* Constants */ +#define regk_dma_ack_pkt 0x00000100 +#define regk_dma_anytime 0x00000001 +#define regk_dma_array 0x00000008 +#define regk_dma_burst 0x00000020 +#define regk_dma_client 0x00000002 +#define regk_dma_copy_next 0x00000010 +#define regk_dma_copy_up 0x00000020 +#define regk_dma_data_at_eol 0x00000001 +#define regk_dma_dis_c 0x00000010 +#define regk_dma_dis_g 0x00000020 +#define regk_dma_idle 0x00000001 +#define regk_dma_intern 0x00000004 +#define regk_dma_load_c 0x00000200 +#define regk_dma_load_c_n 0x00000280 +#define regk_dma_load_c_next 0x00000240 +#define regk_dma_load_d 0x00000140 +#define regk_dma_load_g 0x00000300 +#define regk_dma_load_g_down 0x000003c0 +#define regk_dma_load_g_next 0x00000340 +#define regk_dma_load_g_up 0x00000380 +#define regk_dma_next_en 0x00000010 +#define regk_dma_next_pkt 0x00000010 +#define regk_dma_no 0x00000000 +#define regk_dma_only_at_wait 0x00000000 +#define regk_dma_restore 0x00000020 +#define regk_dma_rst 0x00000001 +#define regk_dma_running 0x00000004 +#define regk_dma_rw_cfg_default 0x00000000 +#define regk_dma_rw_cmd_default 0x00000000 +#define regk_dma_rw_intr_mask_default 0x00000000 +#define regk_dma_rw_stat_default 0x00000101 +#define regk_dma_rw_stream_cmd_default 0x00000000 +#define regk_dma_save_down 0x00000020 +#define regk_dma_save_up 0x00000020 +#define regk_dma_set_reg 0x00000050 +#define regk_dma_set_w_size1 0x00000190 +#define regk_dma_set_w_size2 0x000001a0 +#define regk_dma_set_w_size4 0x000001c0 +#define regk_dma_stopped 0x00000002 +#define regk_dma_store_c 0x00000002 +#define regk_dma_store_descr 0x00000000 +#define regk_dma_store_g 0x00000004 +#define regk_dma_store_md 0x00000001 +#define regk_dma_sw 0x00000008 +#define regk_dma_update_down 0x00000020 +#define regk_dma_yes 0x00000001 +#endif /* __dma_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/eth_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/eth_defs_asm.h new file mode 100644 index 000000000000..c9f49864831b --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/eth_defs_asm.h @@ -0,0 +1,498 @@ +#ifndef __eth_defs_asm_h +#define __eth_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/eth/rtl/eth_regs.r + * id: eth_regs.r,v 1.11 2005/02/09 10:48:38 kriskn Exp + * last modfied: Mon Apr 11 16:07:03 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/eth_defs_asm.h ../../inst/eth/rtl/eth_regs.r + * id: $Id: eth_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_ma0_lo, scope eth, type rw */ +#define reg_eth_rw_ma0_lo___addr___lsb 0 +#define reg_eth_rw_ma0_lo___addr___width 32 +#define reg_eth_rw_ma0_lo_offset 0 + +/* Register rw_ma0_hi, scope eth, type rw */ +#define reg_eth_rw_ma0_hi___addr___lsb 0 +#define reg_eth_rw_ma0_hi___addr___width 16 +#define reg_eth_rw_ma0_hi_offset 4 + +/* Register rw_ma1_lo, scope eth, type rw */ +#define reg_eth_rw_ma1_lo___addr___lsb 0 +#define reg_eth_rw_ma1_lo___addr___width 32 +#define reg_eth_rw_ma1_lo_offset 8 + +/* Register rw_ma1_hi, scope eth, type rw */ +#define reg_eth_rw_ma1_hi___addr___lsb 0 +#define reg_eth_rw_ma1_hi___addr___width 16 +#define reg_eth_rw_ma1_hi_offset 12 + +/* Register rw_ga_lo, scope eth, type rw */ +#define reg_eth_rw_ga_lo___table___lsb 0 +#define reg_eth_rw_ga_lo___table___width 32 +#define reg_eth_rw_ga_lo_offset 16 + +/* Register rw_ga_hi, scope eth, type rw */ +#define reg_eth_rw_ga_hi___table___lsb 0 +#define reg_eth_rw_ga_hi___table___width 32 +#define reg_eth_rw_ga_hi_offset 20 + +/* Register rw_gen_ctrl, scope eth, type rw */ +#define reg_eth_rw_gen_ctrl___en___lsb 0 +#define reg_eth_rw_gen_ctrl___en___width 1 +#define reg_eth_rw_gen_ctrl___en___bit 0 +#define reg_eth_rw_gen_ctrl___phy___lsb 1 +#define reg_eth_rw_gen_ctrl___phy___width 2 +#define reg_eth_rw_gen_ctrl___protocol___lsb 3 +#define reg_eth_rw_gen_ctrl___protocol___width 1 +#define reg_eth_rw_gen_ctrl___protocol___bit 3 +#define reg_eth_rw_gen_ctrl___loopback___lsb 4 +#define reg_eth_rw_gen_ctrl___loopback___width 1 +#define reg_eth_rw_gen_ctrl___loopback___bit 4 +#define reg_eth_rw_gen_ctrl___flow_ctrl_dis___lsb 5 +#define reg_eth_rw_gen_ctrl___flow_ctrl_dis___width 1 +#define reg_eth_rw_gen_ctrl___flow_ctrl_dis___bit 5 +#define reg_eth_rw_gen_ctrl_offset 24 + +/* Register rw_rec_ctrl, scope eth, type rw */ +#define reg_eth_rw_rec_ctrl___ma0___lsb 0 +#define reg_eth_rw_rec_ctrl___ma0___width 1 +#define reg_eth_rw_rec_ctrl___ma0___bit 0 +#define reg_eth_rw_rec_ctrl___ma1___lsb 1 +#define reg_eth_rw_rec_ctrl___ma1___width 1 +#define reg_eth_rw_rec_ctrl___ma1___bit 1 +#define reg_eth_rw_rec_ctrl___individual___lsb 2 +#define reg_eth_rw_rec_ctrl___individual___width 1 +#define reg_eth_rw_rec_ctrl___individual___bit 2 +#define reg_eth_rw_rec_ctrl___broadcast___lsb 3 +#define reg_eth_rw_rec_ctrl___broadcast___width 1 +#define reg_eth_rw_rec_ctrl___broadcast___bit 3 +#define reg_eth_rw_rec_ctrl___undersize___lsb 4 +#define reg_eth_rw_rec_ctrl___undersize___width 1 +#define reg_eth_rw_rec_ctrl___undersize___bit 4 +#define reg_eth_rw_rec_ctrl___oversize___lsb 5 +#define reg_eth_rw_rec_ctrl___oversize___width 1 +#define reg_eth_rw_rec_ctrl___oversize___bit 5 +#define reg_eth_rw_rec_ctrl___bad_crc___lsb 6 +#define reg_eth_rw_rec_ctrl___bad_crc___width 1 +#define reg_eth_rw_rec_ctrl___bad_crc___bit 6 +#define reg_eth_rw_rec_ctrl___duplex___lsb 7 +#define reg_eth_rw_rec_ctrl___duplex___width 1 +#define reg_eth_rw_rec_ctrl___duplex___bit 7 +#define reg_eth_rw_rec_ctrl___max_size___lsb 8 +#define reg_eth_rw_rec_ctrl___max_size___width 1 +#define reg_eth_rw_rec_ctrl___max_size___bit 8 +#define reg_eth_rw_rec_ctrl_offset 28 + +/* Register rw_tr_ctrl, scope eth, type rw */ +#define reg_eth_rw_tr_ctrl___crc___lsb 0 +#define reg_eth_rw_tr_ctrl___crc___width 1 +#define reg_eth_rw_tr_ctrl___crc___bit 0 +#define reg_eth_rw_tr_ctrl___pad___lsb 1 +#define reg_eth_rw_tr_ctrl___pad___width 1 +#define reg_eth_rw_tr_ctrl___pad___bit 1 +#define reg_eth_rw_tr_ctrl___retry___lsb 2 +#define reg_eth_rw_tr_ctrl___retry___width 1 +#define reg_eth_rw_tr_ctrl___retry___bit 2 +#define reg_eth_rw_tr_ctrl___ignore_col___lsb 3 +#define reg_eth_rw_tr_ctrl___ignore_col___width 1 +#define reg_eth_rw_tr_ctrl___ignore_col___bit 3 +#define reg_eth_rw_tr_ctrl___cancel___lsb 4 +#define reg_eth_rw_tr_ctrl___cancel___width 1 +#define reg_eth_rw_tr_ctrl___cancel___bit 4 +#define reg_eth_rw_tr_ctrl___hsh_delay___lsb 5 +#define reg_eth_rw_tr_ctrl___hsh_delay___width 1 +#define reg_eth_rw_tr_ctrl___hsh_delay___bit 5 +#define reg_eth_rw_tr_ctrl___ignore_crs___lsb 6 +#define reg_eth_rw_tr_ctrl___ignore_crs___width 1 +#define reg_eth_rw_tr_ctrl___ignore_crs___bit 6 +#define reg_eth_rw_tr_ctrl_offset 32 + +/* Register rw_clr_err, scope eth, type rw */ +#define reg_eth_rw_clr_err___clr___lsb 0 +#define reg_eth_rw_clr_err___clr___width 1 +#define reg_eth_rw_clr_err___clr___bit 0 +#define reg_eth_rw_clr_err_offset 36 + +/* Register rw_mgm_ctrl, scope eth, type rw */ +#define reg_eth_rw_mgm_ctrl___mdio___lsb 0 +#define reg_eth_rw_mgm_ctrl___mdio___width 1 +#define reg_eth_rw_mgm_ctrl___mdio___bit 0 +#define reg_eth_rw_mgm_ctrl___mdoe___lsb 1 +#define reg_eth_rw_mgm_ctrl___mdoe___width 1 +#define reg_eth_rw_mgm_ctrl___mdoe___bit 1 +#define reg_eth_rw_mgm_ctrl___mdc___lsb 2 +#define reg_eth_rw_mgm_ctrl___mdc___width 1 +#define reg_eth_rw_mgm_ctrl___mdc___bit 2 +#define reg_eth_rw_mgm_ctrl___phyclk___lsb 3 +#define reg_eth_rw_mgm_ctrl___phyclk___width 1 +#define reg_eth_rw_mgm_ctrl___phyclk___bit 3 +#define reg_eth_rw_mgm_ctrl___txdata___lsb 4 +#define reg_eth_rw_mgm_ctrl___txdata___width 4 +#define reg_eth_rw_mgm_ctrl___txen___lsb 8 +#define reg_eth_rw_mgm_ctrl___txen___width 1 +#define reg_eth_rw_mgm_ctrl___txen___bit 8 +#define reg_eth_rw_mgm_ctrl_offset 40 + +/* Register r_stat, scope eth, type r */ +#define reg_eth_r_stat___mdio___lsb 0 +#define reg_eth_r_stat___mdio___width 1 +#define reg_eth_r_stat___mdio___bit 0 +#define reg_eth_r_stat___exc_col___lsb 1 +#define reg_eth_r_stat___exc_col___width 1 +#define reg_eth_r_stat___exc_col___bit 1 +#define reg_eth_r_stat___urun___lsb 2 +#define reg_eth_r_stat___urun___width 1 +#define reg_eth_r_stat___urun___bit 2 +#define reg_eth_r_stat___phyclk___lsb 3 +#define reg_eth_r_stat___phyclk___width 1 +#define reg_eth_r_stat___phyclk___bit 3 +#define reg_eth_r_stat___txdata___lsb 4 +#define reg_eth_r_stat___txdata___width 4 +#define reg_eth_r_stat___txen___lsb 8 +#define reg_eth_r_stat___txen___width 1 +#define reg_eth_r_stat___txen___bit 8 +#define reg_eth_r_stat___col___lsb 9 +#define reg_eth_r_stat___col___width 1 +#define reg_eth_r_stat___col___bit 9 +#define reg_eth_r_stat___crs___lsb 10 +#define reg_eth_r_stat___crs___width 1 +#define reg_eth_r_stat___crs___bit 10 +#define reg_eth_r_stat___txclk___lsb 11 +#define reg_eth_r_stat___txclk___width 1 +#define reg_eth_r_stat___txclk___bit 11 +#define reg_eth_r_stat___rxdata___lsb 12 +#define reg_eth_r_stat___rxdata___width 4 +#define reg_eth_r_stat___rxer___lsb 16 +#define reg_eth_r_stat___rxer___width 1 +#define reg_eth_r_stat___rxer___bit 16 +#define reg_eth_r_stat___rxdv___lsb 17 +#define reg_eth_r_stat___rxdv___width 1 +#define reg_eth_r_stat___rxdv___bit 17 +#define reg_eth_r_stat___rxclk___lsb 18 +#define reg_eth_r_stat___rxclk___width 1 +#define reg_eth_r_stat___rxclk___bit 18 +#define reg_eth_r_stat_offset 44 + +/* Register rs_rec_cnt, scope eth, type rs */ +#define reg_eth_rs_rec_cnt___crc_err___lsb 0 +#define reg_eth_rs_rec_cnt___crc_err___width 8 +#define reg_eth_rs_rec_cnt___align_err___lsb 8 +#define reg_eth_rs_rec_cnt___align_err___width 8 +#define reg_eth_rs_rec_cnt___oversize___lsb 16 +#define reg_eth_rs_rec_cnt___oversize___width 8 +#define reg_eth_rs_rec_cnt___congestion___lsb 24 +#define reg_eth_rs_rec_cnt___congestion___width 8 +#define reg_eth_rs_rec_cnt_offset 48 + +/* Register r_rec_cnt, scope eth, type r */ +#define reg_eth_r_rec_cnt___crc_err___lsb 0 +#define reg_eth_r_rec_cnt___crc_err___width 8 +#define reg_eth_r_rec_cnt___align_err___lsb 8 +#define reg_eth_r_rec_cnt___align_err___width 8 +#define reg_eth_r_rec_cnt___oversize___lsb 16 +#define reg_eth_r_rec_cnt___oversize___width 8 +#define reg_eth_r_rec_cnt___congestion___lsb 24 +#define reg_eth_r_rec_cnt___congestion___width 8 +#define reg_eth_r_rec_cnt_offset 52 + +/* Register rs_tr_cnt, scope eth, type rs */ +#define reg_eth_rs_tr_cnt___single_col___lsb 0 +#define reg_eth_rs_tr_cnt___single_col___width 8 +#define reg_eth_rs_tr_cnt___mult_col___lsb 8 +#define reg_eth_rs_tr_cnt___mult_col___width 8 +#define reg_eth_rs_tr_cnt___late_col___lsb 16 +#define reg_eth_rs_tr_cnt___late_col___width 8 +#define reg_eth_rs_tr_cnt___deferred___lsb 24 +#define reg_eth_rs_tr_cnt___deferred___width 8 +#define reg_eth_rs_tr_cnt_offset 56 + +/* Register r_tr_cnt, scope eth, type r */ +#define reg_eth_r_tr_cnt___single_col___lsb 0 +#define reg_eth_r_tr_cnt___single_col___width 8 +#define reg_eth_r_tr_cnt___mult_col___lsb 8 +#define reg_eth_r_tr_cnt___mult_col___width 8 +#define reg_eth_r_tr_cnt___late_col___lsb 16 +#define reg_eth_r_tr_cnt___late_col___width 8 +#define reg_eth_r_tr_cnt___deferred___lsb 24 +#define reg_eth_r_tr_cnt___deferred___width 8 +#define reg_eth_r_tr_cnt_offset 60 + +/* Register rs_phy_cnt, scope eth, type rs */ +#define reg_eth_rs_phy_cnt___carrier_loss___lsb 0 +#define reg_eth_rs_phy_cnt___carrier_loss___width 8 +#define reg_eth_rs_phy_cnt___sqe_err___lsb 8 +#define reg_eth_rs_phy_cnt___sqe_err___width 8 +#define reg_eth_rs_phy_cnt_offset 64 + +/* Register r_phy_cnt, scope eth, type r */ +#define reg_eth_r_phy_cnt___carrier_loss___lsb 0 +#define reg_eth_r_phy_cnt___carrier_loss___width 8 +#define reg_eth_r_phy_cnt___sqe_err___lsb 8 +#define reg_eth_r_phy_cnt___sqe_err___width 8 +#define reg_eth_r_phy_cnt_offset 68 + +/* Register rw_test_ctrl, scope eth, type rw */ +#define reg_eth_rw_test_ctrl___snmp_inc___lsb 0 +#define reg_eth_rw_test_ctrl___snmp_inc___width 1 +#define reg_eth_rw_test_ctrl___snmp_inc___bit 0 +#define reg_eth_rw_test_ctrl___snmp___lsb 1 +#define reg_eth_rw_test_ctrl___snmp___width 1 +#define reg_eth_rw_test_ctrl___snmp___bit 1 +#define reg_eth_rw_test_ctrl___backoff___lsb 2 +#define reg_eth_rw_test_ctrl___backoff___width 1 +#define reg_eth_rw_test_ctrl___backoff___bit 2 +#define reg_eth_rw_test_ctrl_offset 72 + +/* Register rw_intr_mask, scope eth, type rw */ +#define reg_eth_rw_intr_mask___crc___lsb 0 +#define reg_eth_rw_intr_mask___crc___width 1 +#define reg_eth_rw_intr_mask___crc___bit 0 +#define reg_eth_rw_intr_mask___align___lsb 1 +#define reg_eth_rw_intr_mask___align___width 1 +#define reg_eth_rw_intr_mask___align___bit 1 +#define reg_eth_rw_intr_mask___oversize___lsb 2 +#define reg_eth_rw_intr_mask___oversize___width 1 +#define reg_eth_rw_intr_mask___oversize___bit 2 +#define reg_eth_rw_intr_mask___congestion___lsb 3 +#define reg_eth_rw_intr_mask___congestion___width 1 +#define reg_eth_rw_intr_mask___congestion___bit 3 +#define reg_eth_rw_intr_mask___single_col___lsb 4 +#define reg_eth_rw_intr_mask___single_col___width 1 +#define reg_eth_rw_intr_mask___single_col___bit 4 +#define reg_eth_rw_intr_mask___mult_col___lsb 5 +#define reg_eth_rw_intr_mask___mult_col___width 1 +#define reg_eth_rw_intr_mask___mult_col___bit 5 +#define reg_eth_rw_intr_mask___late_col___lsb 6 +#define reg_eth_rw_intr_mask___late_col___width 1 +#define reg_eth_rw_intr_mask___late_col___bit 6 +#define reg_eth_rw_intr_mask___deferred___lsb 7 +#define reg_eth_rw_intr_mask___deferred___width 1 +#define reg_eth_rw_intr_mask___deferred___bit 7 +#define reg_eth_rw_intr_mask___carrier_loss___lsb 8 +#define reg_eth_rw_intr_mask___carrier_loss___width 1 +#define reg_eth_rw_intr_mask___carrier_loss___bit 8 +#define reg_eth_rw_intr_mask___sqe_test_err___lsb 9 +#define reg_eth_rw_intr_mask___sqe_test_err___width 1 +#define reg_eth_rw_intr_mask___sqe_test_err___bit 9 +#define reg_eth_rw_intr_mask___orun___lsb 10 +#define reg_eth_rw_intr_mask___orun___width 1 +#define reg_eth_rw_intr_mask___orun___bit 10 +#define reg_eth_rw_intr_mask___urun___lsb 11 +#define reg_eth_rw_intr_mask___urun___width 1 +#define reg_eth_rw_intr_mask___urun___bit 11 +#define reg_eth_rw_intr_mask___excessive_col___lsb 12 +#define reg_eth_rw_intr_mask___excessive_col___width 1 +#define reg_eth_rw_intr_mask___excessive_col___bit 12 +#define reg_eth_rw_intr_mask___mdio___lsb 13 +#define reg_eth_rw_intr_mask___mdio___width 1 +#define reg_eth_rw_intr_mask___mdio___bit 13 +#define reg_eth_rw_intr_mask_offset 76 + +/* Register rw_ack_intr, scope eth, type rw */ +#define reg_eth_rw_ack_intr___crc___lsb 0 +#define reg_eth_rw_ack_intr___crc___width 1 +#define reg_eth_rw_ack_intr___crc___bit 0 +#define reg_eth_rw_ack_intr___align___lsb 1 +#define reg_eth_rw_ack_intr___align___width 1 +#define reg_eth_rw_ack_intr___align___bit 1 +#define reg_eth_rw_ack_intr___oversize___lsb 2 +#define reg_eth_rw_ack_intr___oversize___width 1 +#define reg_eth_rw_ack_intr___oversize___bit 2 +#define reg_eth_rw_ack_intr___congestion___lsb 3 +#define reg_eth_rw_ack_intr___congestion___width 1 +#define reg_eth_rw_ack_intr___congestion___bit 3 +#define reg_eth_rw_ack_intr___single_col___lsb 4 +#define reg_eth_rw_ack_intr___single_col___width 1 +#define reg_eth_rw_ack_intr___single_col___bit 4 +#define reg_eth_rw_ack_intr___mult_col___lsb 5 +#define reg_eth_rw_ack_intr___mult_col___width 1 +#define reg_eth_rw_ack_intr___mult_col___bit 5 +#define reg_eth_rw_ack_intr___late_col___lsb 6 +#define reg_eth_rw_ack_intr___late_col___width 1 +#define reg_eth_rw_ack_intr___late_col___bit 6 +#define reg_eth_rw_ack_intr___deferred___lsb 7 +#define reg_eth_rw_ack_intr___deferred___width 1 +#define reg_eth_rw_ack_intr___deferred___bit 7 +#define reg_eth_rw_ack_intr___carrier_loss___lsb 8 +#define reg_eth_rw_ack_intr___carrier_loss___width 1 +#define reg_eth_rw_ack_intr___carrier_loss___bit 8 +#define reg_eth_rw_ack_intr___sqe_test_err___lsb 9 +#define reg_eth_rw_ack_intr___sqe_test_err___width 1 +#define reg_eth_rw_ack_intr___sqe_test_err___bit 9 +#define reg_eth_rw_ack_intr___orun___lsb 10 +#define reg_eth_rw_ack_intr___orun___width 1 +#define reg_eth_rw_ack_intr___orun___bit 10 +#define reg_eth_rw_ack_intr___urun___lsb 11 +#define reg_eth_rw_ack_intr___urun___width 1 +#define reg_eth_rw_ack_intr___urun___bit 11 +#define reg_eth_rw_ack_intr___excessive_col___lsb 12 +#define reg_eth_rw_ack_intr___excessive_col___width 1 +#define reg_eth_rw_ack_intr___excessive_col___bit 12 +#define reg_eth_rw_ack_intr___mdio___lsb 13 +#define reg_eth_rw_ack_intr___mdio___width 1 +#define reg_eth_rw_ack_intr___mdio___bit 13 +#define reg_eth_rw_ack_intr_offset 80 + +/* Register r_intr, scope eth, type r */ +#define reg_eth_r_intr___crc___lsb 0 +#define reg_eth_r_intr___crc___width 1 +#define reg_eth_r_intr___crc___bit 0 +#define reg_eth_r_intr___align___lsb 1 +#define reg_eth_r_intr___align___width 1 +#define reg_eth_r_intr___align___bit 1 +#define reg_eth_r_intr___oversize___lsb 2 +#define reg_eth_r_intr___oversize___width 1 +#define reg_eth_r_intr___oversize___bit 2 +#define reg_eth_r_intr___congestion___lsb 3 +#define reg_eth_r_intr___congestion___width 1 +#define reg_eth_r_intr___congestion___bit 3 +#define reg_eth_r_intr___single_col___lsb 4 +#define reg_eth_r_intr___single_col___width 1 +#define reg_eth_r_intr___single_col___bit 4 +#define reg_eth_r_intr___mult_col___lsb 5 +#define reg_eth_r_intr___mult_col___width 1 +#define reg_eth_r_intr___mult_col___bit 5 +#define reg_eth_r_intr___late_col___lsb 6 +#define reg_eth_r_intr___late_col___width 1 +#define reg_eth_r_intr___late_col___bit 6 +#define reg_eth_r_intr___deferred___lsb 7 +#define reg_eth_r_intr___deferred___width 1 +#define reg_eth_r_intr___deferred___bit 7 +#define reg_eth_r_intr___carrier_loss___lsb 8 +#define reg_eth_r_intr___carrier_loss___width 1 +#define reg_eth_r_intr___carrier_loss___bit 8 +#define reg_eth_r_intr___sqe_test_err___lsb 9 +#define reg_eth_r_intr___sqe_test_err___width 1 +#define reg_eth_r_intr___sqe_test_err___bit 9 +#define reg_eth_r_intr___orun___lsb 10 +#define reg_eth_r_intr___orun___width 1 +#define reg_eth_r_intr___orun___bit 10 +#define reg_eth_r_intr___urun___lsb 11 +#define reg_eth_r_intr___urun___width 1 +#define reg_eth_r_intr___urun___bit 11 +#define reg_eth_r_intr___excessive_col___lsb 12 +#define reg_eth_r_intr___excessive_col___width 1 +#define reg_eth_r_intr___excessive_col___bit 12 +#define reg_eth_r_intr___mdio___lsb 13 +#define reg_eth_r_intr___mdio___width 1 +#define reg_eth_r_intr___mdio___bit 13 +#define reg_eth_r_intr_offset 84 + +/* Register r_masked_intr, scope eth, type r */ +#define reg_eth_r_masked_intr___crc___lsb 0 +#define reg_eth_r_masked_intr___crc___width 1 +#define reg_eth_r_masked_intr___crc___bit 0 +#define reg_eth_r_masked_intr___align___lsb 1 +#define reg_eth_r_masked_intr___align___width 1 +#define reg_eth_r_masked_intr___align___bit 1 +#define reg_eth_r_masked_intr___oversize___lsb 2 +#define reg_eth_r_masked_intr___oversize___width 1 +#define reg_eth_r_masked_intr___oversize___bit 2 +#define reg_eth_r_masked_intr___congestion___lsb 3 +#define reg_eth_r_masked_intr___congestion___width 1 +#define reg_eth_r_masked_intr___congestion___bit 3 +#define reg_eth_r_masked_intr___single_col___lsb 4 +#define reg_eth_r_masked_intr___single_col___width 1 +#define reg_eth_r_masked_intr___single_col___bit 4 +#define reg_eth_r_masked_intr___mult_col___lsb 5 +#define reg_eth_r_masked_intr___mult_col___width 1 +#define reg_eth_r_masked_intr___mult_col___bit 5 +#define reg_eth_r_masked_intr___late_col___lsb 6 +#define reg_eth_r_masked_intr___late_col___width 1 +#define reg_eth_r_masked_intr___late_col___bit 6 +#define reg_eth_r_masked_intr___deferred___lsb 7 +#define reg_eth_r_masked_intr___deferred___width 1 +#define reg_eth_r_masked_intr___deferred___bit 7 +#define reg_eth_r_masked_intr___carrier_loss___lsb 8 +#define reg_eth_r_masked_intr___carrier_loss___width 1 +#define reg_eth_r_masked_intr___carrier_loss___bit 8 +#define reg_eth_r_masked_intr___sqe_test_err___lsb 9 +#define reg_eth_r_masked_intr___sqe_test_err___width 1 +#define reg_eth_r_masked_intr___sqe_test_err___bit 9 +#define reg_eth_r_masked_intr___orun___lsb 10 +#define reg_eth_r_masked_intr___orun___width 1 +#define reg_eth_r_masked_intr___orun___bit 10 +#define reg_eth_r_masked_intr___urun___lsb 11 +#define reg_eth_r_masked_intr___urun___width 1 +#define reg_eth_r_masked_intr___urun___bit 11 +#define reg_eth_r_masked_intr___excessive_col___lsb 12 +#define reg_eth_r_masked_intr___excessive_col___width 1 +#define reg_eth_r_masked_intr___excessive_col___bit 12 +#define reg_eth_r_masked_intr___mdio___lsb 13 +#define reg_eth_r_masked_intr___mdio___width 1 +#define reg_eth_r_masked_intr___mdio___bit 13 +#define reg_eth_r_masked_intr_offset 88 + + +/* Constants */ +#define regk_eth_discard 0x00000000 +#define regk_eth_ether 0x00000000 +#define regk_eth_full 0x00000001 +#define regk_eth_half 0x00000000 +#define regk_eth_hsh 0x00000001 +#define regk_eth_mii 0x00000001 +#define regk_eth_mii_clk 0x00000000 +#define regk_eth_mii_rec 0x00000002 +#define regk_eth_no 0x00000000 +#define regk_eth_rec 0x00000001 +#define regk_eth_rw_ga_hi_default 0x00000000 +#define regk_eth_rw_ga_lo_default 0x00000000 +#define regk_eth_rw_gen_ctrl_default 0x00000000 +#define regk_eth_rw_intr_mask_default 0x00000000 +#define regk_eth_rw_ma0_hi_default 0x00000000 +#define regk_eth_rw_ma0_lo_default 0x00000000 +#define regk_eth_rw_ma1_hi_default 0x00000000 +#define regk_eth_rw_ma1_lo_default 0x00000000 +#define regk_eth_rw_mgm_ctrl_default 0x00000000 +#define regk_eth_rw_test_ctrl_default 0x00000000 +#define regk_eth_size1518 0x00000000 +#define regk_eth_size1522 0x00000001 +#define regk_eth_yes 0x00000001 +#endif /* __eth_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/gio_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/gio_defs_asm.h new file mode 100644 index 000000000000..35356bc08629 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/gio_defs_asm.h @@ -0,0 +1,276 @@ +#ifndef __gio_defs_asm_h +#define __gio_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/gio/rtl/gio_regs.r + * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp + * last modfied: Mon Apr 11 16:07:47 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/gio_defs_asm.h ../../inst/gio/rtl/gio_regs.r + * id: $Id: gio_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_pa_dout, scope gio, type rw */ +#define reg_gio_rw_pa_dout___data___lsb 0 +#define reg_gio_rw_pa_dout___data___width 8 +#define reg_gio_rw_pa_dout_offset 0 + +/* Register r_pa_din, scope gio, type r */ +#define reg_gio_r_pa_din___data___lsb 0 +#define reg_gio_r_pa_din___data___width 8 +#define reg_gio_r_pa_din_offset 4 + +/* Register rw_pa_oe, scope gio, type rw */ +#define reg_gio_rw_pa_oe___oe___lsb 0 +#define reg_gio_rw_pa_oe___oe___width 8 +#define reg_gio_rw_pa_oe_offset 8 + +/* Register rw_intr_cfg, scope gio, type rw */ +#define reg_gio_rw_intr_cfg___pa0___lsb 0 +#define reg_gio_rw_intr_cfg___pa0___width 3 +#define reg_gio_rw_intr_cfg___pa1___lsb 3 +#define reg_gio_rw_intr_cfg___pa1___width 3 +#define reg_gio_rw_intr_cfg___pa2___lsb 6 +#define reg_gio_rw_intr_cfg___pa2___width 3 +#define reg_gio_rw_intr_cfg___pa3___lsb 9 +#define reg_gio_rw_intr_cfg___pa3___width 3 +#define reg_gio_rw_intr_cfg___pa4___lsb 12 +#define reg_gio_rw_intr_cfg___pa4___width 3 +#define reg_gio_rw_intr_cfg___pa5___lsb 15 +#define reg_gio_rw_intr_cfg___pa5___width 3 +#define reg_gio_rw_intr_cfg___pa6___lsb 18 +#define reg_gio_rw_intr_cfg___pa6___width 3 +#define reg_gio_rw_intr_cfg___pa7___lsb 21 +#define reg_gio_rw_intr_cfg___pa7___width 3 +#define reg_gio_rw_intr_cfg_offset 12 + +/* Register rw_intr_mask, scope gio, type rw */ +#define reg_gio_rw_intr_mask___pa0___lsb 0 +#define reg_gio_rw_intr_mask___pa0___width 1 +#define reg_gio_rw_intr_mask___pa0___bit 0 +#define reg_gio_rw_intr_mask___pa1___lsb 1 +#define reg_gio_rw_intr_mask___pa1___width 1 +#define reg_gio_rw_intr_mask___pa1___bit 1 +#define reg_gio_rw_intr_mask___pa2___lsb 2 +#define reg_gio_rw_intr_mask___pa2___width 1 +#define reg_gio_rw_intr_mask___pa2___bit 2 +#define reg_gio_rw_intr_mask___pa3___lsb 3 +#define reg_gio_rw_intr_mask___pa3___width 1 +#define reg_gio_rw_intr_mask___pa3___bit 3 +#define reg_gio_rw_intr_mask___pa4___lsb 4 +#define reg_gio_rw_intr_mask___pa4___width 1 +#define reg_gio_rw_intr_mask___pa4___bit 4 +#define reg_gio_rw_intr_mask___pa5___lsb 5 +#define reg_gio_rw_intr_mask___pa5___width 1 +#define reg_gio_rw_intr_mask___pa5___bit 5 +#define reg_gio_rw_intr_mask___pa6___lsb 6 +#define reg_gio_rw_intr_mask___pa6___width 1 +#define reg_gio_rw_intr_mask___pa6___bit 6 +#define reg_gio_rw_intr_mask___pa7___lsb 7 +#define reg_gio_rw_intr_mask___pa7___width 1 +#define reg_gio_rw_intr_mask___pa7___bit 7 +#define reg_gio_rw_intr_mask_offset 16 + +/* Register rw_ack_intr, scope gio, type rw */ +#define reg_gio_rw_ack_intr___pa0___lsb 0 +#define reg_gio_rw_ack_intr___pa0___width 1 +#define reg_gio_rw_ack_intr___pa0___bit 0 +#define reg_gio_rw_ack_intr___pa1___lsb 1 +#define reg_gio_rw_ack_intr___pa1___width 1 +#define reg_gio_rw_ack_intr___pa1___bit 1 +#define reg_gio_rw_ack_intr___pa2___lsb 2 +#define reg_gio_rw_ack_intr___pa2___width 1 +#define reg_gio_rw_ack_intr___pa2___bit 2 +#define reg_gio_rw_ack_intr___pa3___lsb 3 +#define reg_gio_rw_ack_intr___pa3___width 1 +#define reg_gio_rw_ack_intr___pa3___bit 3 +#define reg_gio_rw_ack_intr___pa4___lsb 4 +#define reg_gio_rw_ack_intr___pa4___width 1 +#define reg_gio_rw_ack_intr___pa4___bit 4 +#define reg_gio_rw_ack_intr___pa5___lsb 5 +#define reg_gio_rw_ack_intr___pa5___width 1 +#define reg_gio_rw_ack_intr___pa5___bit 5 +#define reg_gio_rw_ack_intr___pa6___lsb 6 +#define reg_gio_rw_ack_intr___pa6___width 1 +#define reg_gio_rw_ack_intr___pa6___bit 6 +#define reg_gio_rw_ack_intr___pa7___lsb 7 +#define reg_gio_rw_ack_intr___pa7___width 1 +#define reg_gio_rw_ack_intr___pa7___bit 7 +#define reg_gio_rw_ack_intr_offset 20 + +/* Register r_intr, scope gio, type r */ +#define reg_gio_r_intr___pa0___lsb 0 +#define reg_gio_r_intr___pa0___width 1 +#define reg_gio_r_intr___pa0___bit 0 +#define reg_gio_r_intr___pa1___lsb 1 +#define reg_gio_r_intr___pa1___width 1 +#define reg_gio_r_intr___pa1___bit 1 +#define reg_gio_r_intr___pa2___lsb 2 +#define reg_gio_r_intr___pa2___width 1 +#define reg_gio_r_intr___pa2___bit 2 +#define reg_gio_r_intr___pa3___lsb 3 +#define reg_gio_r_intr___pa3___width 1 +#define reg_gio_r_intr___pa3___bit 3 +#define reg_gio_r_intr___pa4___lsb 4 +#define reg_gio_r_intr___pa4___width 1 +#define reg_gio_r_intr___pa4___bit 4 +#define reg_gio_r_intr___pa5___lsb 5 +#define reg_gio_r_intr___pa5___width 1 +#define reg_gio_r_intr___pa5___bit 5 +#define reg_gio_r_intr___pa6___lsb 6 +#define reg_gio_r_intr___pa6___width 1 +#define reg_gio_r_intr___pa6___bit 6 +#define reg_gio_r_intr___pa7___lsb 7 +#define reg_gio_r_intr___pa7___width 1 +#define reg_gio_r_intr___pa7___bit 7 +#define reg_gio_r_intr_offset 24 + +/* Register r_masked_intr, scope gio, type r */ +#define reg_gio_r_masked_intr___pa0___lsb 0 +#define reg_gio_r_masked_intr___pa0___width 1 +#define reg_gio_r_masked_intr___pa0___bit 0 +#define reg_gio_r_masked_intr___pa1___lsb 1 +#define reg_gio_r_masked_intr___pa1___width 1 +#define reg_gio_r_masked_intr___pa1___bit 1 +#define reg_gio_r_masked_intr___pa2___lsb 2 +#define reg_gio_r_masked_intr___pa2___width 1 +#define reg_gio_r_masked_intr___pa2___bit 2 +#define reg_gio_r_masked_intr___pa3___lsb 3 +#define reg_gio_r_masked_intr___pa3___width 1 +#define reg_gio_r_masked_intr___pa3___bit 3 +#define reg_gio_r_masked_intr___pa4___lsb 4 +#define reg_gio_r_masked_intr___pa4___width 1 +#define reg_gio_r_masked_intr___pa4___bit 4 +#define reg_gio_r_masked_intr___pa5___lsb 5 +#define reg_gio_r_masked_intr___pa5___width 1 +#define reg_gio_r_masked_intr___pa5___bit 5 +#define reg_gio_r_masked_intr___pa6___lsb 6 +#define reg_gio_r_masked_intr___pa6___width 1 +#define reg_gio_r_masked_intr___pa6___bit 6 +#define reg_gio_r_masked_intr___pa7___lsb 7 +#define reg_gio_r_masked_intr___pa7___width 1 +#define reg_gio_r_masked_intr___pa7___bit 7 +#define reg_gio_r_masked_intr_offset 28 + +/* Register rw_pb_dout, scope gio, type rw */ +#define reg_gio_rw_pb_dout___data___lsb 0 +#define reg_gio_rw_pb_dout___data___width 18 +#define reg_gio_rw_pb_dout_offset 32 + +/* Register r_pb_din, scope gio, type r */ +#define reg_gio_r_pb_din___data___lsb 0 +#define reg_gio_r_pb_din___data___width 18 +#define reg_gio_r_pb_din_offset 36 + +/* Register rw_pb_oe, scope gio, type rw */ +#define reg_gio_rw_pb_oe___oe___lsb 0 +#define reg_gio_rw_pb_oe___oe___width 18 +#define reg_gio_rw_pb_oe_offset 40 + +/* Register rw_pc_dout, scope gio, type rw */ +#define reg_gio_rw_pc_dout___data___lsb 0 +#define reg_gio_rw_pc_dout___data___width 18 +#define reg_gio_rw_pc_dout_offset 48 + +/* Register r_pc_din, scope gio, type r */ +#define reg_gio_r_pc_din___data___lsb 0 +#define reg_gio_r_pc_din___data___width 18 +#define reg_gio_r_pc_din_offset 52 + +/* Register rw_pc_oe, scope gio, type rw */ +#define reg_gio_rw_pc_oe___oe___lsb 0 +#define reg_gio_rw_pc_oe___oe___width 18 +#define reg_gio_rw_pc_oe_offset 56 + +/* Register rw_pd_dout, scope gio, type rw */ +#define reg_gio_rw_pd_dout___data___lsb 0 +#define reg_gio_rw_pd_dout___data___width 18 +#define reg_gio_rw_pd_dout_offset 64 + +/* Register r_pd_din, scope gio, type r */ +#define reg_gio_r_pd_din___data___lsb 0 +#define reg_gio_r_pd_din___data___width 18 +#define reg_gio_r_pd_din_offset 68 + +/* Register rw_pd_oe, scope gio, type rw */ +#define reg_gio_rw_pd_oe___oe___lsb 0 +#define reg_gio_rw_pd_oe___oe___width 18 +#define reg_gio_rw_pd_oe_offset 72 + +/* Register rw_pe_dout, scope gio, type rw */ +#define reg_gio_rw_pe_dout___data___lsb 0 +#define reg_gio_rw_pe_dout___data___width 18 +#define reg_gio_rw_pe_dout_offset 80 + +/* Register r_pe_din, scope gio, type r */ +#define reg_gio_r_pe_din___data___lsb 0 +#define reg_gio_r_pe_din___data___width 18 +#define reg_gio_r_pe_din_offset 84 + +/* Register rw_pe_oe, scope gio, type rw */ +#define reg_gio_rw_pe_oe___oe___lsb 0 +#define reg_gio_rw_pe_oe___oe___width 18 +#define reg_gio_rw_pe_oe_offset 88 + + +/* Constants */ +#define regk_gio_anyedge 0x00000007 +#define regk_gio_hi 0x00000001 +#define regk_gio_lo 0x00000002 +#define regk_gio_negedge 0x00000006 +#define regk_gio_no 0x00000000 +#define regk_gio_off 0x00000000 +#define regk_gio_posedge 0x00000005 +#define regk_gio_rw_intr_cfg_default 0x00000000 +#define regk_gio_rw_intr_mask_default 0x00000000 +#define regk_gio_rw_pa_oe_default 0x00000000 +#define regk_gio_rw_pb_oe_default 0x00000000 +#define regk_gio_rw_pc_oe_default 0x00000000 +#define regk_gio_rw_pd_oe_default 0x00000000 +#define regk_gio_rw_pe_oe_default 0x00000000 +#define regk_gio_set 0x00000003 +#define regk_gio_yes 0x00000001 +#endif /* __gio_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/intr_vect.h b/arch/cris/include/arch-v32/arch/hwregs/asm/intr_vect.h new file mode 100644 index 000000000000..c8315905c571 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/intr_vect.h @@ -0,0 +1,38 @@ +/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version + from ../../inst/intr_vect/rtl/guinness/ivmask.config.r +version . */ + +#ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R +#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R +#define MEMARB_INTR_VECT 0x31 +#define GEN_IO_INTR_VECT 0x32 +#define IOP0_INTR_VECT 0x33 +#define IOP1_INTR_VECT 0x34 +#define IOP2_INTR_VECT 0x35 +#define IOP3_INTR_VECT 0x36 +#define DMA0_INTR_VECT 0x37 +#define DMA1_INTR_VECT 0x38 +#define DMA2_INTR_VECT 0x39 +#define DMA3_INTR_VECT 0x3a +#define DMA4_INTR_VECT 0x3b +#define DMA5_INTR_VECT 0x3c +#define DMA6_INTR_VECT 0x3d +#define DMA7_INTR_VECT 0x3e +#define DMA8_INTR_VECT 0x3f +#define DMA9_INTR_VECT 0x40 +#define ATA_INTR_VECT 0x41 +#define SSER0_INTR_VECT 0x42 +#define SSER1_INTR_VECT 0x43 +#define SER0_INTR_VECT 0x44 +#define SER1_INTR_VECT 0x45 +#define SER2_INTR_VECT 0x46 +#define SER3_INTR_VECT 0x47 +#define P21_INTR_VECT 0x48 +#define ETH0_INTR_VECT 0x49 +#define ETH1_INTR_VECT 0x4a +#define TIMER_INTR_VECT 0x4b +#define BIF_ARB_INTR_VECT 0x4c +#define BIF_DMA_INTR_VECT 0x4d +#define EXT_INTR_VECT 0x4e + +#endif diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/intr_vect_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/intr_vect_defs_asm.h new file mode 100644 index 000000000000..6df2a433b02d --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/intr_vect_defs_asm.h @@ -0,0 +1,355 @@ +#ifndef __intr_vect_defs_asm_h +#define __intr_vect_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/intr_vect/rtl/guinness/ivmask.config.r + * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp + * last modfied: Mon Apr 11 16:08:03 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/intr_vect_defs_asm.h ../../inst/intr_vect/rtl/guinness/ivmask.config.r + * id: $Id: intr_vect_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_mask, scope intr_vect, type rw */ +#define reg_intr_vect_rw_mask___memarb___lsb 0 +#define reg_intr_vect_rw_mask___memarb___width 1 +#define reg_intr_vect_rw_mask___memarb___bit 0 +#define reg_intr_vect_rw_mask___gen_io___lsb 1 +#define reg_intr_vect_rw_mask___gen_io___width 1 +#define reg_intr_vect_rw_mask___gen_io___bit 1 +#define reg_intr_vect_rw_mask___iop0___lsb 2 +#define reg_intr_vect_rw_mask___iop0___width 1 +#define reg_intr_vect_rw_mask___iop0___bit 2 +#define reg_intr_vect_rw_mask___iop1___lsb 3 +#define reg_intr_vect_rw_mask___iop1___width 1 +#define reg_intr_vect_rw_mask___iop1___bit 3 +#define reg_intr_vect_rw_mask___iop2___lsb 4 +#define reg_intr_vect_rw_mask___iop2___width 1 +#define reg_intr_vect_rw_mask___iop2___bit 4 +#define reg_intr_vect_rw_mask___iop3___lsb 5 +#define reg_intr_vect_rw_mask___iop3___width 1 +#define reg_intr_vect_rw_mask___iop3___bit 5 +#define reg_intr_vect_rw_mask___dma0___lsb 6 +#define reg_intr_vect_rw_mask___dma0___width 1 +#define reg_intr_vect_rw_mask___dma0___bit 6 +#define reg_intr_vect_rw_mask___dma1___lsb 7 +#define reg_intr_vect_rw_mask___dma1___width 1 +#define reg_intr_vect_rw_mask___dma1___bit 7 +#define reg_intr_vect_rw_mask___dma2___lsb 8 +#define reg_intr_vect_rw_mask___dma2___width 1 +#define reg_intr_vect_rw_mask___dma2___bit 8 +#define reg_intr_vect_rw_mask___dma3___lsb 9 +#define reg_intr_vect_rw_mask___dma3___width 1 +#define reg_intr_vect_rw_mask___dma3___bit 9 +#define reg_intr_vect_rw_mask___dma4___lsb 10 +#define reg_intr_vect_rw_mask___dma4___width 1 +#define reg_intr_vect_rw_mask___dma4___bit 10 +#define reg_intr_vect_rw_mask___dma5___lsb 11 +#define reg_intr_vect_rw_mask___dma5___width 1 +#define reg_intr_vect_rw_mask___dma5___bit 11 +#define reg_intr_vect_rw_mask___dma6___lsb 12 +#define reg_intr_vect_rw_mask___dma6___width 1 +#define reg_intr_vect_rw_mask___dma6___bit 12 +#define reg_intr_vect_rw_mask___dma7___lsb 13 +#define reg_intr_vect_rw_mask___dma7___width 1 +#define reg_intr_vect_rw_mask___dma7___bit 13 +#define reg_intr_vect_rw_mask___dma8___lsb 14 +#define reg_intr_vect_rw_mask___dma8___width 1 +#define reg_intr_vect_rw_mask___dma8___bit 14 +#define reg_intr_vect_rw_mask___dma9___lsb 15 +#define reg_intr_vect_rw_mask___dma9___width 1 +#define reg_intr_vect_rw_mask___dma9___bit 15 +#define reg_intr_vect_rw_mask___ata___lsb 16 +#define reg_intr_vect_rw_mask___ata___width 1 +#define reg_intr_vect_rw_mask___ata___bit 16 +#define reg_intr_vect_rw_mask___sser0___lsb 17 +#define reg_intr_vect_rw_mask___sser0___width 1 +#define reg_intr_vect_rw_mask___sser0___bit 17 +#define reg_intr_vect_rw_mask___sser1___lsb 18 +#define reg_intr_vect_rw_mask___sser1___width 1 +#define reg_intr_vect_rw_mask___sser1___bit 18 +#define reg_intr_vect_rw_mask___ser0___lsb 19 +#define reg_intr_vect_rw_mask___ser0___width 1 +#define reg_intr_vect_rw_mask___ser0___bit 19 +#define reg_intr_vect_rw_mask___ser1___lsb 20 +#define reg_intr_vect_rw_mask___ser1___width 1 +#define reg_intr_vect_rw_mask___ser1___bit 20 +#define reg_intr_vect_rw_mask___ser2___lsb 21 +#define reg_intr_vect_rw_mask___ser2___width 1 +#define reg_intr_vect_rw_mask___ser2___bit 21 +#define reg_intr_vect_rw_mask___ser3___lsb 22 +#define reg_intr_vect_rw_mask___ser3___width 1 +#define reg_intr_vect_rw_mask___ser3___bit 22 +#define reg_intr_vect_rw_mask___p21___lsb 23 +#define reg_intr_vect_rw_mask___p21___width 1 +#define reg_intr_vect_rw_mask___p21___bit 23 +#define reg_intr_vect_rw_mask___eth0___lsb 24 +#define reg_intr_vect_rw_mask___eth0___width 1 +#define reg_intr_vect_rw_mask___eth0___bit 24 +#define reg_intr_vect_rw_mask___eth1___lsb 25 +#define reg_intr_vect_rw_mask___eth1___width 1 +#define reg_intr_vect_rw_mask___eth1___bit 25 +#define reg_intr_vect_rw_mask___timer___lsb 26 +#define reg_intr_vect_rw_mask___timer___width 1 +#define reg_intr_vect_rw_mask___timer___bit 26 +#define reg_intr_vect_rw_mask___bif_arb___lsb 27 +#define reg_intr_vect_rw_mask___bif_arb___width 1 +#define reg_intr_vect_rw_mask___bif_arb___bit 27 +#define reg_intr_vect_rw_mask___bif_dma___lsb 28 +#define reg_intr_vect_rw_mask___bif_dma___width 1 +#define reg_intr_vect_rw_mask___bif_dma___bit 28 +#define reg_intr_vect_rw_mask___ext___lsb 29 +#define reg_intr_vect_rw_mask___ext___width 1 +#define reg_intr_vect_rw_mask___ext___bit 29 +#define reg_intr_vect_rw_mask_offset 0 + +/* Register r_vect, scope intr_vect, type r */ +#define reg_intr_vect_r_vect___memarb___lsb 0 +#define reg_intr_vect_r_vect___memarb___width 1 +#define reg_intr_vect_r_vect___memarb___bit 0 +#define reg_intr_vect_r_vect___gen_io___lsb 1 +#define reg_intr_vect_r_vect___gen_io___width 1 +#define reg_intr_vect_r_vect___gen_io___bit 1 +#define reg_intr_vect_r_vect___iop0___lsb 2 +#define reg_intr_vect_r_vect___iop0___width 1 +#define reg_intr_vect_r_vect___iop0___bit 2 +#define reg_intr_vect_r_vect___iop1___lsb 3 +#define reg_intr_vect_r_vect___iop1___width 1 +#define reg_intr_vect_r_vect___iop1___bit 3 +#define reg_intr_vect_r_vect___iop2___lsb 4 +#define reg_intr_vect_r_vect___iop2___width 1 +#define reg_intr_vect_r_vect___iop2___bit 4 +#define reg_intr_vect_r_vect___iop3___lsb 5 +#define reg_intr_vect_r_vect___iop3___width 1 +#define reg_intr_vect_r_vect___iop3___bit 5 +#define reg_intr_vect_r_vect___dma0___lsb 6 +#define reg_intr_vect_r_vect___dma0___width 1 +#define reg_intr_vect_r_vect___dma0___bit 6 +#define reg_intr_vect_r_vect___dma1___lsb 7 +#define reg_intr_vect_r_vect___dma1___width 1 +#define reg_intr_vect_r_vect___dma1___bit 7 +#define reg_intr_vect_r_vect___dma2___lsb 8 +#define reg_intr_vect_r_vect___dma2___width 1 +#define reg_intr_vect_r_vect___dma2___bit 8 +#define reg_intr_vect_r_vect___dma3___lsb 9 +#define reg_intr_vect_r_vect___dma3___width 1 +#define reg_intr_vect_r_vect___dma3___bit 9 +#define reg_intr_vect_r_vect___dma4___lsb 10 +#define reg_intr_vect_r_vect___dma4___width 1 +#define reg_intr_vect_r_vect___dma4___bit 10 +#define reg_intr_vect_r_vect___dma5___lsb 11 +#define reg_intr_vect_r_vect___dma5___width 1 +#define reg_intr_vect_r_vect___dma5___bit 11 +#define reg_intr_vect_r_vect___dma6___lsb 12 +#define reg_intr_vect_r_vect___dma6___width 1 +#define reg_intr_vect_r_vect___dma6___bit 12 +#define reg_intr_vect_r_vect___dma7___lsb 13 +#define reg_intr_vect_r_vect___dma7___width 1 +#define reg_intr_vect_r_vect___dma7___bit 13 +#define reg_intr_vect_r_vect___dma8___lsb 14 +#define reg_intr_vect_r_vect___dma8___width 1 +#define reg_intr_vect_r_vect___dma8___bit 14 +#define reg_intr_vect_r_vect___dma9___lsb 15 +#define reg_intr_vect_r_vect___dma9___width 1 +#define reg_intr_vect_r_vect___dma9___bit 15 +#define reg_intr_vect_r_vect___ata___lsb 16 +#define reg_intr_vect_r_vect___ata___width 1 +#define reg_intr_vect_r_vect___ata___bit 16 +#define reg_intr_vect_r_vect___sser0___lsb 17 +#define reg_intr_vect_r_vect___sser0___width 1 +#define reg_intr_vect_r_vect___sser0___bit 17 +#define reg_intr_vect_r_vect___sser1___lsb 18 +#define reg_intr_vect_r_vect___sser1___width 1 +#define reg_intr_vect_r_vect___sser1___bit 18 +#define reg_intr_vect_r_vect___ser0___lsb 19 +#define reg_intr_vect_r_vect___ser0___width 1 +#define reg_intr_vect_r_vect___ser0___bit 19 +#define reg_intr_vect_r_vect___ser1___lsb 20 +#define reg_intr_vect_r_vect___ser1___width 1 +#define reg_intr_vect_r_vect___ser1___bit 20 +#define reg_intr_vect_r_vect___ser2___lsb 21 +#define reg_intr_vect_r_vect___ser2___width 1 +#define reg_intr_vect_r_vect___ser2___bit 21 +#define reg_intr_vect_r_vect___ser3___lsb 22 +#define reg_intr_vect_r_vect___ser3___width 1 +#define reg_intr_vect_r_vect___ser3___bit 22 +#define reg_intr_vect_r_vect___p21___lsb 23 +#define reg_intr_vect_r_vect___p21___width 1 +#define reg_intr_vect_r_vect___p21___bit 23 +#define reg_intr_vect_r_vect___eth0___lsb 24 +#define reg_intr_vect_r_vect___eth0___width 1 +#define reg_intr_vect_r_vect___eth0___bit 24 +#define reg_intr_vect_r_vect___eth1___lsb 25 +#define reg_intr_vect_r_vect___eth1___width 1 +#define reg_intr_vect_r_vect___eth1___bit 25 +#define reg_intr_vect_r_vect___timer___lsb 26 +#define reg_intr_vect_r_vect___timer___width 1 +#define reg_intr_vect_r_vect___timer___bit 26 +#define reg_intr_vect_r_vect___bif_arb___lsb 27 +#define reg_intr_vect_r_vect___bif_arb___width 1 +#define reg_intr_vect_r_vect___bif_arb___bit 27 +#define reg_intr_vect_r_vect___bif_dma___lsb 28 +#define reg_intr_vect_r_vect___bif_dma___width 1 +#define reg_intr_vect_r_vect___bif_dma___bit 28 +#define reg_intr_vect_r_vect___ext___lsb 29 +#define reg_intr_vect_r_vect___ext___width 1 +#define reg_intr_vect_r_vect___ext___bit 29 +#define reg_intr_vect_r_vect_offset 4 + +/* Register r_masked_vect, scope intr_vect, type r */ +#define reg_intr_vect_r_masked_vect___memarb___lsb 0 +#define reg_intr_vect_r_masked_vect___memarb___width 1 +#define reg_intr_vect_r_masked_vect___memarb___bit 0 +#define reg_intr_vect_r_masked_vect___gen_io___lsb 1 +#define reg_intr_vect_r_masked_vect___gen_io___width 1 +#define reg_intr_vect_r_masked_vect___gen_io___bit 1 +#define reg_intr_vect_r_masked_vect___iop0___lsb 2 +#define reg_intr_vect_r_masked_vect___iop0___width 1 +#define reg_intr_vect_r_masked_vect___iop0___bit 2 +#define reg_intr_vect_r_masked_vect___iop1___lsb 3 +#define reg_intr_vect_r_masked_vect___iop1___width 1 +#define reg_intr_vect_r_masked_vect___iop1___bit 3 +#define reg_intr_vect_r_masked_vect___iop2___lsb 4 +#define reg_intr_vect_r_masked_vect___iop2___width 1 +#define reg_intr_vect_r_masked_vect___iop2___bit 4 +#define reg_intr_vect_r_masked_vect___iop3___lsb 5 +#define reg_intr_vect_r_masked_vect___iop3___width 1 +#define reg_intr_vect_r_masked_vect___iop3___bit 5 +#define reg_intr_vect_r_masked_vect___dma0___lsb 6 +#define reg_intr_vect_r_masked_vect___dma0___width 1 +#define reg_intr_vect_r_masked_vect___dma0___bit 6 +#define reg_intr_vect_r_masked_vect___dma1___lsb 7 +#define reg_intr_vect_r_masked_vect___dma1___width 1 +#define reg_intr_vect_r_masked_vect___dma1___bit 7 +#define reg_intr_vect_r_masked_vect___dma2___lsb 8 +#define reg_intr_vect_r_masked_vect___dma2___width 1 +#define reg_intr_vect_r_masked_vect___dma2___bit 8 +#define reg_intr_vect_r_masked_vect___dma3___lsb 9 +#define reg_intr_vect_r_masked_vect___dma3___width 1 +#define reg_intr_vect_r_masked_vect___dma3___bit 9 +#define reg_intr_vect_r_masked_vect___dma4___lsb 10 +#define reg_intr_vect_r_masked_vect___dma4___width 1 +#define reg_intr_vect_r_masked_vect___dma4___bit 10 +#define reg_intr_vect_r_masked_vect___dma5___lsb 11 +#define reg_intr_vect_r_masked_vect___dma5___width 1 +#define reg_intr_vect_r_masked_vect___dma5___bit 11 +#define reg_intr_vect_r_masked_vect___dma6___lsb 12 +#define reg_intr_vect_r_masked_vect___dma6___width 1 +#define reg_intr_vect_r_masked_vect___dma6___bit 12 +#define reg_intr_vect_r_masked_vect___dma7___lsb 13 +#define reg_intr_vect_r_masked_vect___dma7___width 1 +#define reg_intr_vect_r_masked_vect___dma7___bit 13 +#define reg_intr_vect_r_masked_vect___dma8___lsb 14 +#define reg_intr_vect_r_masked_vect___dma8___width 1 +#define reg_intr_vect_r_masked_vect___dma8___bit 14 +#define reg_intr_vect_r_masked_vect___dma9___lsb 15 +#define reg_intr_vect_r_masked_vect___dma9___width 1 +#define reg_intr_vect_r_masked_vect___dma9___bit 15 +#define reg_intr_vect_r_masked_vect___ata___lsb 16 +#define reg_intr_vect_r_masked_vect___ata___width 1 +#define reg_intr_vect_r_masked_vect___ata___bit 16 +#define reg_intr_vect_r_masked_vect___sser0___lsb 17 +#define reg_intr_vect_r_masked_vect___sser0___width 1 +#define reg_intr_vect_r_masked_vect___sser0___bit 17 +#define reg_intr_vect_r_masked_vect___sser1___lsb 18 +#define reg_intr_vect_r_masked_vect___sser1___width 1 +#define reg_intr_vect_r_masked_vect___sser1___bit 18 +#define reg_intr_vect_r_masked_vect___ser0___lsb 19 +#define reg_intr_vect_r_masked_vect___ser0___width 1 +#define reg_intr_vect_r_masked_vect___ser0___bit 19 +#define reg_intr_vect_r_masked_vect___ser1___lsb 20 +#define reg_intr_vect_r_masked_vect___ser1___width 1 +#define reg_intr_vect_r_masked_vect___ser1___bit 20 +#define reg_intr_vect_r_masked_vect___ser2___lsb 21 +#define reg_intr_vect_r_masked_vect___ser2___width 1 +#define reg_intr_vect_r_masked_vect___ser2___bit 21 +#define reg_intr_vect_r_masked_vect___ser3___lsb 22 +#define reg_intr_vect_r_masked_vect___ser3___width 1 +#define reg_intr_vect_r_masked_vect___ser3___bit 22 +#define reg_intr_vect_r_masked_vect___p21___lsb 23 +#define reg_intr_vect_r_masked_vect___p21___width 1 +#define reg_intr_vect_r_masked_vect___p21___bit 23 +#define reg_intr_vect_r_masked_vect___eth0___lsb 24 +#define reg_intr_vect_r_masked_vect___eth0___width 1 +#define reg_intr_vect_r_masked_vect___eth0___bit 24 +#define reg_intr_vect_r_masked_vect___eth1___lsb 25 +#define reg_intr_vect_r_masked_vect___eth1___width 1 +#define reg_intr_vect_r_masked_vect___eth1___bit 25 +#define reg_intr_vect_r_masked_vect___timer___lsb 26 +#define reg_intr_vect_r_masked_vect___timer___width 1 +#define reg_intr_vect_r_masked_vect___timer___bit 26 +#define reg_intr_vect_r_masked_vect___bif_arb___lsb 27 +#define reg_intr_vect_r_masked_vect___bif_arb___width 1 +#define reg_intr_vect_r_masked_vect___bif_arb___bit 27 +#define reg_intr_vect_r_masked_vect___bif_dma___lsb 28 +#define reg_intr_vect_r_masked_vect___bif_dma___width 1 +#define reg_intr_vect_r_masked_vect___bif_dma___bit 28 +#define reg_intr_vect_r_masked_vect___ext___lsb 29 +#define reg_intr_vect_r_masked_vect___ext___width 1 +#define reg_intr_vect_r_masked_vect___ext___bit 29 +#define reg_intr_vect_r_masked_vect_offset 8 + +/* Register r_nmi, scope intr_vect, type r */ +#define reg_intr_vect_r_nmi___ext___lsb 0 +#define reg_intr_vect_r_nmi___ext___width 1 +#define reg_intr_vect_r_nmi___ext___bit 0 +#define reg_intr_vect_r_nmi___watchdog___lsb 1 +#define reg_intr_vect_r_nmi___watchdog___width 1 +#define reg_intr_vect_r_nmi___watchdog___bit 1 +#define reg_intr_vect_r_nmi_offset 12 + +/* Register r_guru, scope intr_vect, type r */ +#define reg_intr_vect_r_guru___jtag___lsb 0 +#define reg_intr_vect_r_guru___jtag___width 1 +#define reg_intr_vect_r_guru___jtag___bit 0 +#define reg_intr_vect_r_guru_offset 16 + + +/* Constants */ +#define regk_intr_vect_off 0x00000000 +#define regk_intr_vect_on 0x00000001 +#define regk_intr_vect_rw_mask_default 0x00000000 +#endif /* __intr_vect_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/irq_nmi_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/irq_nmi_defs_asm.h new file mode 100644 index 000000000000..0c8084054840 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/irq_nmi_defs_asm.h @@ -0,0 +1,69 @@ +#ifndef __irq_nmi_defs_asm_h +#define __irq_nmi_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../mod/irq_nmi.r + * id: + * last modfied: Thu Jan 22 09:22:43 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/irq_nmi_defs_asm.h ../../mod/irq_nmi.r + * id: $Id: irq_nmi_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cmd, scope irq_nmi, type rw */ +#define reg_irq_nmi_rw_cmd___delay___lsb 0 +#define reg_irq_nmi_rw_cmd___delay___width 16 +#define reg_irq_nmi_rw_cmd___op___lsb 16 +#define reg_irq_nmi_rw_cmd___op___width 2 +#define reg_irq_nmi_rw_cmd_offset 0 + + +/* Constants */ +#define regk_irq_nmi_ack_irq 0x00000002 +#define regk_irq_nmi_ack_nmi 0x00000003 +#define regk_irq_nmi_irq 0x00000000 +#define regk_irq_nmi_nmi 0x00000001 +#endif /* __irq_nmi_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/marb_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/marb_defs_asm.h new file mode 100644 index 000000000000..45400eb8d389 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/marb_defs_asm.h @@ -0,0 +1,579 @@ +#ifndef __marb_defs_asm_h +#define __marb_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: + * last modfied: Mon Apr 11 16:12:16 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/marb_defs_asm.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +#define STRIDE_marb_rw_int_slots 4 +/* Register rw_int_slots, scope marb, type rw */ +#define reg_marb_rw_int_slots___owner___lsb 0 +#define reg_marb_rw_int_slots___owner___width 4 +#define reg_marb_rw_int_slots_offset 0 + +#define STRIDE_marb_rw_ext_slots 4 +/* Register rw_ext_slots, scope marb, type rw */ +#define reg_marb_rw_ext_slots___owner___lsb 0 +#define reg_marb_rw_ext_slots___owner___width 4 +#define reg_marb_rw_ext_slots_offset 256 + +#define STRIDE_marb_rw_regs_slots 4 +/* Register rw_regs_slots, scope marb, type rw */ +#define reg_marb_rw_regs_slots___owner___lsb 0 +#define reg_marb_rw_regs_slots___owner___width 4 +#define reg_marb_rw_regs_slots_offset 512 + +/* Register rw_intr_mask, scope marb, type rw */ +#define reg_marb_rw_intr_mask___bp0___lsb 0 +#define reg_marb_rw_intr_mask___bp0___width 1 +#define reg_marb_rw_intr_mask___bp0___bit 0 +#define reg_marb_rw_intr_mask___bp1___lsb 1 +#define reg_marb_rw_intr_mask___bp1___width 1 +#define reg_marb_rw_intr_mask___bp1___bit 1 +#define reg_marb_rw_intr_mask___bp2___lsb 2 +#define reg_marb_rw_intr_mask___bp2___width 1 +#define reg_marb_rw_intr_mask___bp2___bit 2 +#define reg_marb_rw_intr_mask___bp3___lsb 3 +#define reg_marb_rw_intr_mask___bp3___width 1 +#define reg_marb_rw_intr_mask___bp3___bit 3 +#define reg_marb_rw_intr_mask_offset 528 + +/* Register rw_ack_intr, scope marb, type rw */ +#define reg_marb_rw_ack_intr___bp0___lsb 0 +#define reg_marb_rw_ack_intr___bp0___width 1 +#define reg_marb_rw_ack_intr___bp0___bit 0 +#define reg_marb_rw_ack_intr___bp1___lsb 1 +#define reg_marb_rw_ack_intr___bp1___width 1 +#define reg_marb_rw_ack_intr___bp1___bit 1 +#define reg_marb_rw_ack_intr___bp2___lsb 2 +#define reg_marb_rw_ack_intr___bp2___width 1 +#define reg_marb_rw_ack_intr___bp2___bit 2 +#define reg_marb_rw_ack_intr___bp3___lsb 3 +#define reg_marb_rw_ack_intr___bp3___width 1 +#define reg_marb_rw_ack_intr___bp3___bit 3 +#define reg_marb_rw_ack_intr_offset 532 + +/* Register r_intr, scope marb, type r */ +#define reg_marb_r_intr___bp0___lsb 0 +#define reg_marb_r_intr___bp0___width 1 +#define reg_marb_r_intr___bp0___bit 0 +#define reg_marb_r_intr___bp1___lsb 1 +#define reg_marb_r_intr___bp1___width 1 +#define reg_marb_r_intr___bp1___bit 1 +#define reg_marb_r_intr___bp2___lsb 2 +#define reg_marb_r_intr___bp2___width 1 +#define reg_marb_r_intr___bp2___bit 2 +#define reg_marb_r_intr___bp3___lsb 3 +#define reg_marb_r_intr___bp3___width 1 +#define reg_marb_r_intr___bp3___bit 3 +#define reg_marb_r_intr_offset 536 + +/* Register r_masked_intr, scope marb, type r */ +#define reg_marb_r_masked_intr___bp0___lsb 0 +#define reg_marb_r_masked_intr___bp0___width 1 +#define reg_marb_r_masked_intr___bp0___bit 0 +#define reg_marb_r_masked_intr___bp1___lsb 1 +#define reg_marb_r_masked_intr___bp1___width 1 +#define reg_marb_r_masked_intr___bp1___bit 1 +#define reg_marb_r_masked_intr___bp2___lsb 2 +#define reg_marb_r_masked_intr___bp2___width 1 +#define reg_marb_r_masked_intr___bp2___bit 2 +#define reg_marb_r_masked_intr___bp3___lsb 3 +#define reg_marb_r_masked_intr___bp3___width 1 +#define reg_marb_r_masked_intr___bp3___bit 3 +#define reg_marb_r_masked_intr_offset 540 + +/* Register rw_stop_mask, scope marb, type rw */ +#define reg_marb_rw_stop_mask___dma0___lsb 0 +#define reg_marb_rw_stop_mask___dma0___width 1 +#define reg_marb_rw_stop_mask___dma0___bit 0 +#define reg_marb_rw_stop_mask___dma1___lsb 1 +#define reg_marb_rw_stop_mask___dma1___width 1 +#define reg_marb_rw_stop_mask___dma1___bit 1 +#define reg_marb_rw_stop_mask___dma2___lsb 2 +#define reg_marb_rw_stop_mask___dma2___width 1 +#define reg_marb_rw_stop_mask___dma2___bit 2 +#define reg_marb_rw_stop_mask___dma3___lsb 3 +#define reg_marb_rw_stop_mask___dma3___width 1 +#define reg_marb_rw_stop_mask___dma3___bit 3 +#define reg_marb_rw_stop_mask___dma4___lsb 4 +#define reg_marb_rw_stop_mask___dma4___width 1 +#define reg_marb_rw_stop_mask___dma4___bit 4 +#define reg_marb_rw_stop_mask___dma5___lsb 5 +#define reg_marb_rw_stop_mask___dma5___width 1 +#define reg_marb_rw_stop_mask___dma5___bit 5 +#define reg_marb_rw_stop_mask___dma6___lsb 6 +#define reg_marb_rw_stop_mask___dma6___width 1 +#define reg_marb_rw_stop_mask___dma6___bit 6 +#define reg_marb_rw_stop_mask___dma7___lsb 7 +#define reg_marb_rw_stop_mask___dma7___width 1 +#define reg_marb_rw_stop_mask___dma7___bit 7 +#define reg_marb_rw_stop_mask___dma8___lsb 8 +#define reg_marb_rw_stop_mask___dma8___width 1 +#define reg_marb_rw_stop_mask___dma8___bit 8 +#define reg_marb_rw_stop_mask___dma9___lsb 9 +#define reg_marb_rw_stop_mask___dma9___width 1 +#define reg_marb_rw_stop_mask___dma9___bit 9 +#define reg_marb_rw_stop_mask___cpui___lsb 10 +#define reg_marb_rw_stop_mask___cpui___width 1 +#define reg_marb_rw_stop_mask___cpui___bit 10 +#define reg_marb_rw_stop_mask___cpud___lsb 11 +#define reg_marb_rw_stop_mask___cpud___width 1 +#define reg_marb_rw_stop_mask___cpud___bit 11 +#define reg_marb_rw_stop_mask___iop___lsb 12 +#define reg_marb_rw_stop_mask___iop___width 1 +#define reg_marb_rw_stop_mask___iop___bit 12 +#define reg_marb_rw_stop_mask___slave___lsb 13 +#define reg_marb_rw_stop_mask___slave___width 1 +#define reg_marb_rw_stop_mask___slave___bit 13 +#define reg_marb_rw_stop_mask_offset 544 + +/* Register r_stopped, scope marb, type r */ +#define reg_marb_r_stopped___dma0___lsb 0 +#define reg_marb_r_stopped___dma0___width 1 +#define reg_marb_r_stopped___dma0___bit 0 +#define reg_marb_r_stopped___dma1___lsb 1 +#define reg_marb_r_stopped___dma1___width 1 +#define reg_marb_r_stopped___dma1___bit 1 +#define reg_marb_r_stopped___dma2___lsb 2 +#define reg_marb_r_stopped___dma2___width 1 +#define reg_marb_r_stopped___dma2___bit 2 +#define reg_marb_r_stopped___dma3___lsb 3 +#define reg_marb_r_stopped___dma3___width 1 +#define reg_marb_r_stopped___dma3___bit 3 +#define reg_marb_r_stopped___dma4___lsb 4 +#define reg_marb_r_stopped___dma4___width 1 +#define reg_marb_r_stopped___dma4___bit 4 +#define reg_marb_r_stopped___dma5___lsb 5 +#define reg_marb_r_stopped___dma5___width 1 +#define reg_marb_r_stopped___dma5___bit 5 +#define reg_marb_r_stopped___dma6___lsb 6 +#define reg_marb_r_stopped___dma6___width 1 +#define reg_marb_r_stopped___dma6___bit 6 +#define reg_marb_r_stopped___dma7___lsb 7 +#define reg_marb_r_stopped___dma7___width 1 +#define reg_marb_r_stopped___dma7___bit 7 +#define reg_marb_r_stopped___dma8___lsb 8 +#define reg_marb_r_stopped___dma8___width 1 +#define reg_marb_r_stopped___dma8___bit 8 +#define reg_marb_r_stopped___dma9___lsb 9 +#define reg_marb_r_stopped___dma9___width 1 +#define reg_marb_r_stopped___dma9___bit 9 +#define reg_marb_r_stopped___cpui___lsb 10 +#define reg_marb_r_stopped___cpui___width 1 +#define reg_marb_r_stopped___cpui___bit 10 +#define reg_marb_r_stopped___cpud___lsb 11 +#define reg_marb_r_stopped___cpud___width 1 +#define reg_marb_r_stopped___cpud___bit 11 +#define reg_marb_r_stopped___iop___lsb 12 +#define reg_marb_r_stopped___iop___width 1 +#define reg_marb_r_stopped___iop___bit 12 +#define reg_marb_r_stopped___slave___lsb 13 +#define reg_marb_r_stopped___slave___width 1 +#define reg_marb_r_stopped___slave___bit 13 +#define reg_marb_r_stopped_offset 548 + +/* Register rw_no_snoop, scope marb, type rw */ +#define reg_marb_rw_no_snoop___dma0___lsb 0 +#define reg_marb_rw_no_snoop___dma0___width 1 +#define reg_marb_rw_no_snoop___dma0___bit 0 +#define reg_marb_rw_no_snoop___dma1___lsb 1 +#define reg_marb_rw_no_snoop___dma1___width 1 +#define reg_marb_rw_no_snoop___dma1___bit 1 +#define reg_marb_rw_no_snoop___dma2___lsb 2 +#define reg_marb_rw_no_snoop___dma2___width 1 +#define reg_marb_rw_no_snoop___dma2___bit 2 +#define reg_marb_rw_no_snoop___dma3___lsb 3 +#define reg_marb_rw_no_snoop___dma3___width 1 +#define reg_marb_rw_no_snoop___dma3___bit 3 +#define reg_marb_rw_no_snoop___dma4___lsb 4 +#define reg_marb_rw_no_snoop___dma4___width 1 +#define reg_marb_rw_no_snoop___dma4___bit 4 +#define reg_marb_rw_no_snoop___dma5___lsb 5 +#define reg_marb_rw_no_snoop___dma5___width 1 +#define reg_marb_rw_no_snoop___dma5___bit 5 +#define reg_marb_rw_no_snoop___dma6___lsb 6 +#define reg_marb_rw_no_snoop___dma6___width 1 +#define reg_marb_rw_no_snoop___dma6___bit 6 +#define reg_marb_rw_no_snoop___dma7___lsb 7 +#define reg_marb_rw_no_snoop___dma7___width 1 +#define reg_marb_rw_no_snoop___dma7___bit 7 +#define reg_marb_rw_no_snoop___dma8___lsb 8 +#define reg_marb_rw_no_snoop___dma8___width 1 +#define reg_marb_rw_no_snoop___dma8___bit 8 +#define reg_marb_rw_no_snoop___dma9___lsb 9 +#define reg_marb_rw_no_snoop___dma9___width 1 +#define reg_marb_rw_no_snoop___dma9___bit 9 +#define reg_marb_rw_no_snoop___cpui___lsb 10 +#define reg_marb_rw_no_snoop___cpui___width 1 +#define reg_marb_rw_no_snoop___cpui___bit 10 +#define reg_marb_rw_no_snoop___cpud___lsb 11 +#define reg_marb_rw_no_snoop___cpud___width 1 +#define reg_marb_rw_no_snoop___cpud___bit 11 +#define reg_marb_rw_no_snoop___iop___lsb 12 +#define reg_marb_rw_no_snoop___iop___width 1 +#define reg_marb_rw_no_snoop___iop___bit 12 +#define reg_marb_rw_no_snoop___slave___lsb 13 +#define reg_marb_rw_no_snoop___slave___width 1 +#define reg_marb_rw_no_snoop___slave___bit 13 +#define reg_marb_rw_no_snoop_offset 832 + +/* Register rw_no_snoop_rq, scope marb, type rw */ +#define reg_marb_rw_no_snoop_rq___cpui___lsb 10 +#define reg_marb_rw_no_snoop_rq___cpui___width 1 +#define reg_marb_rw_no_snoop_rq___cpui___bit 10 +#define reg_marb_rw_no_snoop_rq___cpud___lsb 11 +#define reg_marb_rw_no_snoop_rq___cpud___width 1 +#define reg_marb_rw_no_snoop_rq___cpud___bit 11 +#define reg_marb_rw_no_snoop_rq_offset 836 + + +/* Constants */ +#define regk_marb_cpud 0x0000000b +#define regk_marb_cpui 0x0000000a +#define regk_marb_dma0 0x00000000 +#define regk_marb_dma1 0x00000001 +#define regk_marb_dma2 0x00000002 +#define regk_marb_dma3 0x00000003 +#define regk_marb_dma4 0x00000004 +#define regk_marb_dma5 0x00000005 +#define regk_marb_dma6 0x00000006 +#define regk_marb_dma7 0x00000007 +#define regk_marb_dma8 0x00000008 +#define regk_marb_dma9 0x00000009 +#define regk_marb_iop 0x0000000c +#define regk_marb_no 0x00000000 +#define regk_marb_r_stopped_default 0x00000000 +#define regk_marb_rw_ext_slots_default 0x00000000 +#define regk_marb_rw_ext_slots_size 0x00000040 +#define regk_marb_rw_int_slots_default 0x00000000 +#define regk_marb_rw_int_slots_size 0x00000040 +#define regk_marb_rw_intr_mask_default 0x00000000 +#define regk_marb_rw_no_snoop_default 0x00000000 +#define regk_marb_rw_no_snoop_rq_default 0x00000000 +#define regk_marb_rw_regs_slots_default 0x00000000 +#define regk_marb_rw_regs_slots_size 0x00000004 +#define regk_marb_rw_stop_mask_default 0x00000000 +#define regk_marb_slave 0x0000000d +#define regk_marb_yes 0x00000001 +#endif /* __marb_defs_asm_h */ +#ifndef __marb_bp_defs_asm_h +#define __marb_bp_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: + * last modfied: Mon Apr 11 16:12:16 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/marb_defs_asm.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_first_addr, scope marb_bp, type rw */ +#define reg_marb_bp_rw_first_addr_offset 0 + +/* Register rw_last_addr, scope marb_bp, type rw */ +#define reg_marb_bp_rw_last_addr_offset 4 + +/* Register rw_op, scope marb_bp, type rw */ +#define reg_marb_bp_rw_op___rd___lsb 0 +#define reg_marb_bp_rw_op___rd___width 1 +#define reg_marb_bp_rw_op___rd___bit 0 +#define reg_marb_bp_rw_op___wr___lsb 1 +#define reg_marb_bp_rw_op___wr___width 1 +#define reg_marb_bp_rw_op___wr___bit 1 +#define reg_marb_bp_rw_op___rd_excl___lsb 2 +#define reg_marb_bp_rw_op___rd_excl___width 1 +#define reg_marb_bp_rw_op___rd_excl___bit 2 +#define reg_marb_bp_rw_op___pri_wr___lsb 3 +#define reg_marb_bp_rw_op___pri_wr___width 1 +#define reg_marb_bp_rw_op___pri_wr___bit 3 +#define reg_marb_bp_rw_op___us_rd___lsb 4 +#define reg_marb_bp_rw_op___us_rd___width 1 +#define reg_marb_bp_rw_op___us_rd___bit 4 +#define reg_marb_bp_rw_op___us_wr___lsb 5 +#define reg_marb_bp_rw_op___us_wr___width 1 +#define reg_marb_bp_rw_op___us_wr___bit 5 +#define reg_marb_bp_rw_op___us_rd_excl___lsb 6 +#define reg_marb_bp_rw_op___us_rd_excl___width 1 +#define reg_marb_bp_rw_op___us_rd_excl___bit 6 +#define reg_marb_bp_rw_op___us_pri_wr___lsb 7 +#define reg_marb_bp_rw_op___us_pri_wr___width 1 +#define reg_marb_bp_rw_op___us_pri_wr___bit 7 +#define reg_marb_bp_rw_op_offset 8 + +/* Register rw_clients, scope marb_bp, type rw */ +#define reg_marb_bp_rw_clients___dma0___lsb 0 +#define reg_marb_bp_rw_clients___dma0___width 1 +#define reg_marb_bp_rw_clients___dma0___bit 0 +#define reg_marb_bp_rw_clients___dma1___lsb 1 +#define reg_marb_bp_rw_clients___dma1___width 1 +#define reg_marb_bp_rw_clients___dma1___bit 1 +#define reg_marb_bp_rw_clients___dma2___lsb 2 +#define reg_marb_bp_rw_clients___dma2___width 1 +#define reg_marb_bp_rw_clients___dma2___bit 2 +#define reg_marb_bp_rw_clients___dma3___lsb 3 +#define reg_marb_bp_rw_clients___dma3___width 1 +#define reg_marb_bp_rw_clients___dma3___bit 3 +#define reg_marb_bp_rw_clients___dma4___lsb 4 +#define reg_marb_bp_rw_clients___dma4___width 1 +#define reg_marb_bp_rw_clients___dma4___bit 4 +#define reg_marb_bp_rw_clients___dma5___lsb 5 +#define reg_marb_bp_rw_clients___dma5___width 1 +#define reg_marb_bp_rw_clients___dma5___bit 5 +#define reg_marb_bp_rw_clients___dma6___lsb 6 +#define reg_marb_bp_rw_clients___dma6___width 1 +#define reg_marb_bp_rw_clients___dma6___bit 6 +#define reg_marb_bp_rw_clients___dma7___lsb 7 +#define reg_marb_bp_rw_clients___dma7___width 1 +#define reg_marb_bp_rw_clients___dma7___bit 7 +#define reg_marb_bp_rw_clients___dma8___lsb 8 +#define reg_marb_bp_rw_clients___dma8___width 1 +#define reg_marb_bp_rw_clients___dma8___bit 8 +#define reg_marb_bp_rw_clients___dma9___lsb 9 +#define reg_marb_bp_rw_clients___dma9___width 1 +#define reg_marb_bp_rw_clients___dma9___bit 9 +#define reg_marb_bp_rw_clients___cpui___lsb 10 +#define reg_marb_bp_rw_clients___cpui___width 1 +#define reg_marb_bp_rw_clients___cpui___bit 10 +#define reg_marb_bp_rw_clients___cpud___lsb 11 +#define reg_marb_bp_rw_clients___cpud___width 1 +#define reg_marb_bp_rw_clients___cpud___bit 11 +#define reg_marb_bp_rw_clients___iop___lsb 12 +#define reg_marb_bp_rw_clients___iop___width 1 +#define reg_marb_bp_rw_clients___iop___bit 12 +#define reg_marb_bp_rw_clients___slave___lsb 13 +#define reg_marb_bp_rw_clients___slave___width 1 +#define reg_marb_bp_rw_clients___slave___bit 13 +#define reg_marb_bp_rw_clients_offset 12 + +/* Register rw_options, scope marb_bp, type rw */ +#define reg_marb_bp_rw_options___wrap___lsb 0 +#define reg_marb_bp_rw_options___wrap___width 1 +#define reg_marb_bp_rw_options___wrap___bit 0 +#define reg_marb_bp_rw_options_offset 16 + +/* Register r_brk_addr, scope marb_bp, type r */ +#define reg_marb_bp_r_brk_addr_offset 20 + +/* Register r_brk_op, scope marb_bp, type r */ +#define reg_marb_bp_r_brk_op___rd___lsb 0 +#define reg_marb_bp_r_brk_op___rd___width 1 +#define reg_marb_bp_r_brk_op___rd___bit 0 +#define reg_marb_bp_r_brk_op___wr___lsb 1 +#define reg_marb_bp_r_brk_op___wr___width 1 +#define reg_marb_bp_r_brk_op___wr___bit 1 +#define reg_marb_bp_r_brk_op___rd_excl___lsb 2 +#define reg_marb_bp_r_brk_op___rd_excl___width 1 +#define reg_marb_bp_r_brk_op___rd_excl___bit 2 +#define reg_marb_bp_r_brk_op___pri_wr___lsb 3 +#define reg_marb_bp_r_brk_op___pri_wr___width 1 +#define reg_marb_bp_r_brk_op___pri_wr___bit 3 +#define reg_marb_bp_r_brk_op___us_rd___lsb 4 +#define reg_marb_bp_r_brk_op___us_rd___width 1 +#define reg_marb_bp_r_brk_op___us_rd___bit 4 +#define reg_marb_bp_r_brk_op___us_wr___lsb 5 +#define reg_marb_bp_r_brk_op___us_wr___width 1 +#define reg_marb_bp_r_brk_op___us_wr___bit 5 +#define reg_marb_bp_r_brk_op___us_rd_excl___lsb 6 +#define reg_marb_bp_r_brk_op___us_rd_excl___width 1 +#define reg_marb_bp_r_brk_op___us_rd_excl___bit 6 +#define reg_marb_bp_r_brk_op___us_pri_wr___lsb 7 +#define reg_marb_bp_r_brk_op___us_pri_wr___width 1 +#define reg_marb_bp_r_brk_op___us_pri_wr___bit 7 +#define reg_marb_bp_r_brk_op_offset 24 + +/* Register r_brk_clients, scope marb_bp, type r */ +#define reg_marb_bp_r_brk_clients___dma0___lsb 0 +#define reg_marb_bp_r_brk_clients___dma0___width 1 +#define reg_marb_bp_r_brk_clients___dma0___bit 0 +#define reg_marb_bp_r_brk_clients___dma1___lsb 1 +#define reg_marb_bp_r_brk_clients___dma1___width 1 +#define reg_marb_bp_r_brk_clients___dma1___bit 1 +#define reg_marb_bp_r_brk_clients___dma2___lsb 2 +#define reg_marb_bp_r_brk_clients___dma2___width 1 +#define reg_marb_bp_r_brk_clients___dma2___bit 2 +#define reg_marb_bp_r_brk_clients___dma3___lsb 3 +#define reg_marb_bp_r_brk_clients___dma3___width 1 +#define reg_marb_bp_r_brk_clients___dma3___bit 3 +#define reg_marb_bp_r_brk_clients___dma4___lsb 4 +#define reg_marb_bp_r_brk_clients___dma4___width 1 +#define reg_marb_bp_r_brk_clients___dma4___bit 4 +#define reg_marb_bp_r_brk_clients___dma5___lsb 5 +#define reg_marb_bp_r_brk_clients___dma5___width 1 +#define reg_marb_bp_r_brk_clients___dma5___bit 5 +#define reg_marb_bp_r_brk_clients___dma6___lsb 6 +#define reg_marb_bp_r_brk_clients___dma6___width 1 +#define reg_marb_bp_r_brk_clients___dma6___bit 6 +#define reg_marb_bp_r_brk_clients___dma7___lsb 7 +#define reg_marb_bp_r_brk_clients___dma7___width 1 +#define reg_marb_bp_r_brk_clients___dma7___bit 7 +#define reg_marb_bp_r_brk_clients___dma8___lsb 8 +#define reg_marb_bp_r_brk_clients___dma8___width 1 +#define reg_marb_bp_r_brk_clients___dma8___bit 8 +#define reg_marb_bp_r_brk_clients___dma9___lsb 9 +#define reg_marb_bp_r_brk_clients___dma9___width 1 +#define reg_marb_bp_r_brk_clients___dma9___bit 9 +#define reg_marb_bp_r_brk_clients___cpui___lsb 10 +#define reg_marb_bp_r_brk_clients___cpui___width 1 +#define reg_marb_bp_r_brk_clients___cpui___bit 10 +#define reg_marb_bp_r_brk_clients___cpud___lsb 11 +#define reg_marb_bp_r_brk_clients___cpud___width 1 +#define reg_marb_bp_r_brk_clients___cpud___bit 11 +#define reg_marb_bp_r_brk_clients___iop___lsb 12 +#define reg_marb_bp_r_brk_clients___iop___width 1 +#define reg_marb_bp_r_brk_clients___iop___bit 12 +#define reg_marb_bp_r_brk_clients___slave___lsb 13 +#define reg_marb_bp_r_brk_clients___slave___width 1 +#define reg_marb_bp_r_brk_clients___slave___bit 13 +#define reg_marb_bp_r_brk_clients_offset 28 + +/* Register r_brk_first_client, scope marb_bp, type r */ +#define reg_marb_bp_r_brk_first_client___dma0___lsb 0 +#define reg_marb_bp_r_brk_first_client___dma0___width 1 +#define reg_marb_bp_r_brk_first_client___dma0___bit 0 +#define reg_marb_bp_r_brk_first_client___dma1___lsb 1 +#define reg_marb_bp_r_brk_first_client___dma1___width 1 +#define reg_marb_bp_r_brk_first_client___dma1___bit 1 +#define reg_marb_bp_r_brk_first_client___dma2___lsb 2 +#define reg_marb_bp_r_brk_first_client___dma2___width 1 +#define reg_marb_bp_r_brk_first_client___dma2___bit 2 +#define reg_marb_bp_r_brk_first_client___dma3___lsb 3 +#define reg_marb_bp_r_brk_first_client___dma3___width 1 +#define reg_marb_bp_r_brk_first_client___dma3___bit 3 +#define reg_marb_bp_r_brk_first_client___dma4___lsb 4 +#define reg_marb_bp_r_brk_first_client___dma4___width 1 +#define reg_marb_bp_r_brk_first_client___dma4___bit 4 +#define reg_marb_bp_r_brk_first_client___dma5___lsb 5 +#define reg_marb_bp_r_brk_first_client___dma5___width 1 +#define reg_marb_bp_r_brk_first_client___dma5___bit 5 +#define reg_marb_bp_r_brk_first_client___dma6___lsb 6 +#define reg_marb_bp_r_brk_first_client___dma6___width 1 +#define reg_marb_bp_r_brk_first_client___dma6___bit 6 +#define reg_marb_bp_r_brk_first_client___dma7___lsb 7 +#define reg_marb_bp_r_brk_first_client___dma7___width 1 +#define reg_marb_bp_r_brk_first_client___dma7___bit 7 +#define reg_marb_bp_r_brk_first_client___dma8___lsb 8 +#define reg_marb_bp_r_brk_first_client___dma8___width 1 +#define reg_marb_bp_r_brk_first_client___dma8___bit 8 +#define reg_marb_bp_r_brk_first_client___dma9___lsb 9 +#define reg_marb_bp_r_brk_first_client___dma9___width 1 +#define reg_marb_bp_r_brk_first_client___dma9___bit 9 +#define reg_marb_bp_r_brk_first_client___cpui___lsb 10 +#define reg_marb_bp_r_brk_first_client___cpui___width 1 +#define reg_marb_bp_r_brk_first_client___cpui___bit 10 +#define reg_marb_bp_r_brk_first_client___cpud___lsb 11 +#define reg_marb_bp_r_brk_first_client___cpud___width 1 +#define reg_marb_bp_r_brk_first_client___cpud___bit 11 +#define reg_marb_bp_r_brk_first_client___iop___lsb 12 +#define reg_marb_bp_r_brk_first_client___iop___width 1 +#define reg_marb_bp_r_brk_first_client___iop___bit 12 +#define reg_marb_bp_r_brk_first_client___slave___lsb 13 +#define reg_marb_bp_r_brk_first_client___slave___width 1 +#define reg_marb_bp_r_brk_first_client___slave___bit 13 +#define reg_marb_bp_r_brk_first_client_offset 32 + +/* Register r_brk_size, scope marb_bp, type r */ +#define reg_marb_bp_r_brk_size_offset 36 + +/* Register rw_ack, scope marb_bp, type rw */ +#define reg_marb_bp_rw_ack_offset 40 + + +/* Constants */ +#define regk_marb_bp_no 0x00000000 +#define regk_marb_bp_rw_op_default 0x00000000 +#define regk_marb_bp_rw_options_default 0x00000000 +#define regk_marb_bp_yes 0x00000001 +#endif /* __marb_bp_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/mmu_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/mmu_defs_asm.h new file mode 100644 index 000000000000..505b7a16d878 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/mmu_defs_asm.h @@ -0,0 +1,212 @@ +#ifndef __mmu_defs_asm_h +#define __mmu_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/mmu/doc/mmu_regs.r + * id: mmu_regs.r,v 1.12 2004/05/06 13:48:45 mikaeln Exp + * last modfied: Mon Apr 11 17:03:20 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/mmu_defs_asm.h ../../inst/mmu/doc/mmu_regs.r + * id: $Id: mmu_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_mm_cfg, scope mmu, type rw */ +#define reg_mmu_rw_mm_cfg___seg_0___lsb 0 +#define reg_mmu_rw_mm_cfg___seg_0___width 1 +#define reg_mmu_rw_mm_cfg___seg_0___bit 0 +#define reg_mmu_rw_mm_cfg___seg_1___lsb 1 +#define reg_mmu_rw_mm_cfg___seg_1___width 1 +#define reg_mmu_rw_mm_cfg___seg_1___bit 1 +#define reg_mmu_rw_mm_cfg___seg_2___lsb 2 +#define reg_mmu_rw_mm_cfg___seg_2___width 1 +#define reg_mmu_rw_mm_cfg___seg_2___bit 2 +#define reg_mmu_rw_mm_cfg___seg_3___lsb 3 +#define reg_mmu_rw_mm_cfg___seg_3___width 1 +#define reg_mmu_rw_mm_cfg___seg_3___bit 3 +#define reg_mmu_rw_mm_cfg___seg_4___lsb 4 +#define reg_mmu_rw_mm_cfg___seg_4___width 1 +#define reg_mmu_rw_mm_cfg___seg_4___bit 4 +#define reg_mmu_rw_mm_cfg___seg_5___lsb 5 +#define reg_mmu_rw_mm_cfg___seg_5___width 1 +#define reg_mmu_rw_mm_cfg___seg_5___bit 5 +#define reg_mmu_rw_mm_cfg___seg_6___lsb 6 +#define reg_mmu_rw_mm_cfg___seg_6___width 1 +#define reg_mmu_rw_mm_cfg___seg_6___bit 6 +#define reg_mmu_rw_mm_cfg___seg_7___lsb 7 +#define reg_mmu_rw_mm_cfg___seg_7___width 1 +#define reg_mmu_rw_mm_cfg___seg_7___bit 7 +#define reg_mmu_rw_mm_cfg___seg_8___lsb 8 +#define reg_mmu_rw_mm_cfg___seg_8___width 1 +#define reg_mmu_rw_mm_cfg___seg_8___bit 8 +#define reg_mmu_rw_mm_cfg___seg_9___lsb 9 +#define reg_mmu_rw_mm_cfg___seg_9___width 1 +#define reg_mmu_rw_mm_cfg___seg_9___bit 9 +#define reg_mmu_rw_mm_cfg___seg_a___lsb 10 +#define reg_mmu_rw_mm_cfg___seg_a___width 1 +#define reg_mmu_rw_mm_cfg___seg_a___bit 10 +#define reg_mmu_rw_mm_cfg___seg_b___lsb 11 +#define reg_mmu_rw_mm_cfg___seg_b___width 1 +#define reg_mmu_rw_mm_cfg___seg_b___bit 11 +#define reg_mmu_rw_mm_cfg___seg_c___lsb 12 +#define reg_mmu_rw_mm_cfg___seg_c___width 1 +#define reg_mmu_rw_mm_cfg___seg_c___bit 12 +#define reg_mmu_rw_mm_cfg___seg_d___lsb 13 +#define reg_mmu_rw_mm_cfg___seg_d___width 1 +#define reg_mmu_rw_mm_cfg___seg_d___bit 13 +#define reg_mmu_rw_mm_cfg___seg_e___lsb 14 +#define reg_mmu_rw_mm_cfg___seg_e___width 1 +#define reg_mmu_rw_mm_cfg___seg_e___bit 14 +#define reg_mmu_rw_mm_cfg___seg_f___lsb 15 +#define reg_mmu_rw_mm_cfg___seg_f___width 1 +#define reg_mmu_rw_mm_cfg___seg_f___bit 15 +#define reg_mmu_rw_mm_cfg___inv___lsb 16 +#define reg_mmu_rw_mm_cfg___inv___width 1 +#define reg_mmu_rw_mm_cfg___inv___bit 16 +#define reg_mmu_rw_mm_cfg___ex___lsb 17 +#define reg_mmu_rw_mm_cfg___ex___width 1 +#define reg_mmu_rw_mm_cfg___ex___bit 17 +#define reg_mmu_rw_mm_cfg___acc___lsb 18 +#define reg_mmu_rw_mm_cfg___acc___width 1 +#define reg_mmu_rw_mm_cfg___acc___bit 18 +#define reg_mmu_rw_mm_cfg___we___lsb 19 +#define reg_mmu_rw_mm_cfg___we___width 1 +#define reg_mmu_rw_mm_cfg___we___bit 19 +#define reg_mmu_rw_mm_cfg_offset 0 + +/* Register rw_mm_kbase_lo, scope mmu, type rw */ +#define reg_mmu_rw_mm_kbase_lo___base_0___lsb 0 +#define reg_mmu_rw_mm_kbase_lo___base_0___width 4 +#define reg_mmu_rw_mm_kbase_lo___base_1___lsb 4 +#define reg_mmu_rw_mm_kbase_lo___base_1___width 4 +#define reg_mmu_rw_mm_kbase_lo___base_2___lsb 8 +#define reg_mmu_rw_mm_kbase_lo___base_2___width 4 +#define reg_mmu_rw_mm_kbase_lo___base_3___lsb 12 +#define reg_mmu_rw_mm_kbase_lo___base_3___width 4 +#define reg_mmu_rw_mm_kbase_lo___base_4___lsb 16 +#define reg_mmu_rw_mm_kbase_lo___base_4___width 4 +#define reg_mmu_rw_mm_kbase_lo___base_5___lsb 20 +#define reg_mmu_rw_mm_kbase_lo___base_5___width 4 +#define reg_mmu_rw_mm_kbase_lo___base_6___lsb 24 +#define reg_mmu_rw_mm_kbase_lo___base_6___width 4 +#define reg_mmu_rw_mm_kbase_lo___base_7___lsb 28 +#define reg_mmu_rw_mm_kbase_lo___base_7___width 4 +#define reg_mmu_rw_mm_kbase_lo_offset 4 + +/* Register rw_mm_kbase_hi, scope mmu, type rw */ +#define reg_mmu_rw_mm_kbase_hi___base_8___lsb 0 +#define reg_mmu_rw_mm_kbase_hi___base_8___width 4 +#define reg_mmu_rw_mm_kbase_hi___base_9___lsb 4 +#define reg_mmu_rw_mm_kbase_hi___base_9___width 4 +#define reg_mmu_rw_mm_kbase_hi___base_a___lsb 8 +#define reg_mmu_rw_mm_kbase_hi___base_a___width 4 +#define reg_mmu_rw_mm_kbase_hi___base_b___lsb 12 +#define reg_mmu_rw_mm_kbase_hi___base_b___width 4 +#define reg_mmu_rw_mm_kbase_hi___base_c___lsb 16 +#define reg_mmu_rw_mm_kbase_hi___base_c___width 4 +#define reg_mmu_rw_mm_kbase_hi___base_d___lsb 20 +#define reg_mmu_rw_mm_kbase_hi___base_d___width 4 +#define reg_mmu_rw_mm_kbase_hi___base_e___lsb 24 +#define reg_mmu_rw_mm_kbase_hi___base_e___width 4 +#define reg_mmu_rw_mm_kbase_hi___base_f___lsb 28 +#define reg_mmu_rw_mm_kbase_hi___base_f___width 4 +#define reg_mmu_rw_mm_kbase_hi_offset 8 + +/* Register r_mm_cause, scope mmu, type r */ +#define reg_mmu_r_mm_cause___pid___lsb 0 +#define reg_mmu_r_mm_cause___pid___width 8 +#define reg_mmu_r_mm_cause___op___lsb 8 +#define reg_mmu_r_mm_cause___op___width 2 +#define reg_mmu_r_mm_cause___vpn___lsb 13 +#define reg_mmu_r_mm_cause___vpn___width 19 +#define reg_mmu_r_mm_cause_offset 12 + +/* Register rw_mm_tlb_sel, scope mmu, type rw */ +#define reg_mmu_rw_mm_tlb_sel___idx___lsb 0 +#define reg_mmu_rw_mm_tlb_sel___idx___width 4 +#define reg_mmu_rw_mm_tlb_sel___set___lsb 4 +#define reg_mmu_rw_mm_tlb_sel___set___width 2 +#define reg_mmu_rw_mm_tlb_sel_offset 16 + +/* Register rw_mm_tlb_lo, scope mmu, type rw */ +#define reg_mmu_rw_mm_tlb_lo___x___lsb 0 +#define reg_mmu_rw_mm_tlb_lo___x___width 1 +#define reg_mmu_rw_mm_tlb_lo___x___bit 0 +#define reg_mmu_rw_mm_tlb_lo___w___lsb 1 +#define reg_mmu_rw_mm_tlb_lo___w___width 1 +#define reg_mmu_rw_mm_tlb_lo___w___bit 1 +#define reg_mmu_rw_mm_tlb_lo___k___lsb 2 +#define reg_mmu_rw_mm_tlb_lo___k___width 1 +#define reg_mmu_rw_mm_tlb_lo___k___bit 2 +#define reg_mmu_rw_mm_tlb_lo___v___lsb 3 +#define reg_mmu_rw_mm_tlb_lo___v___width 1 +#define reg_mmu_rw_mm_tlb_lo___v___bit 3 +#define reg_mmu_rw_mm_tlb_lo___g___lsb 4 +#define reg_mmu_rw_mm_tlb_lo___g___width 1 +#define reg_mmu_rw_mm_tlb_lo___g___bit 4 +#define reg_mmu_rw_mm_tlb_lo___pfn___lsb 13 +#define reg_mmu_rw_mm_tlb_lo___pfn___width 19 +#define reg_mmu_rw_mm_tlb_lo_offset 20 + +/* Register rw_mm_tlb_hi, scope mmu, type rw */ +#define reg_mmu_rw_mm_tlb_hi___pid___lsb 0 +#define reg_mmu_rw_mm_tlb_hi___pid___width 8 +#define reg_mmu_rw_mm_tlb_hi___vpn___lsb 13 +#define reg_mmu_rw_mm_tlb_hi___vpn___width 19 +#define reg_mmu_rw_mm_tlb_hi_offset 24 + + +/* Constants */ +#define regk_mmu_execute 0x00000000 +#define regk_mmu_flush 0x00000003 +#define regk_mmu_linear 0x00000001 +#define regk_mmu_no 0x00000000 +#define regk_mmu_off 0x00000000 +#define regk_mmu_on 0x00000001 +#define regk_mmu_page 0x00000000 +#define regk_mmu_read 0x00000001 +#define regk_mmu_write 0x00000002 +#define regk_mmu_yes 0x00000001 +#endif /* __mmu_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/mmu_supp_reg.h b/arch/cris/include/arch-v32/arch/hwregs/asm/mmu_supp_reg.h new file mode 100644 index 000000000000..339500bf3bc0 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/mmu_supp_reg.h @@ -0,0 +1,7 @@ +#define RW_MM_CFG 0 +#define RW_MM_KBASE_LO 1 +#define RW_MM_KBASE_HI 2 +#define R_MM_CAUSE 3 +#define RW_MM_TLB_SEL 4 +#define RW_MM_TLB_LO 5 +#define RW_MM_TLB_HI 6 diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/rt_trace_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/rt_trace_defs_asm.h new file mode 100644 index 000000000000..10246f49fb28 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/rt_trace_defs_asm.h @@ -0,0 +1,142 @@ +#ifndef __rt_trace_defs_asm_h +#define __rt_trace_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/rt_trace/rtl/rt_regs.r + * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp + * last modfied: Mon Apr 11 16:09:14 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/rt_trace_defs_asm.h ../../inst/rt_trace/rtl/rt_regs.r + * id: $Id: rt_trace_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope rt_trace, type rw */ +#define reg_rt_trace_rw_cfg___en___lsb 0 +#define reg_rt_trace_rw_cfg___en___width 1 +#define reg_rt_trace_rw_cfg___en___bit 0 +#define reg_rt_trace_rw_cfg___mode___lsb 1 +#define reg_rt_trace_rw_cfg___mode___width 1 +#define reg_rt_trace_rw_cfg___mode___bit 1 +#define reg_rt_trace_rw_cfg___owner___lsb 2 +#define reg_rt_trace_rw_cfg___owner___width 1 +#define reg_rt_trace_rw_cfg___owner___bit 2 +#define reg_rt_trace_rw_cfg___wp___lsb 3 +#define reg_rt_trace_rw_cfg___wp___width 1 +#define reg_rt_trace_rw_cfg___wp___bit 3 +#define reg_rt_trace_rw_cfg___stall___lsb 4 +#define reg_rt_trace_rw_cfg___stall___width 1 +#define reg_rt_trace_rw_cfg___stall___bit 4 +#define reg_rt_trace_rw_cfg___wp_start___lsb 8 +#define reg_rt_trace_rw_cfg___wp_start___width 7 +#define reg_rt_trace_rw_cfg___wp_stop___lsb 16 +#define reg_rt_trace_rw_cfg___wp_stop___width 7 +#define reg_rt_trace_rw_cfg_offset 0 + +/* Register rw_tap_ctrl, scope rt_trace, type rw */ +#define reg_rt_trace_rw_tap_ctrl___ack_data___lsb 0 +#define reg_rt_trace_rw_tap_ctrl___ack_data___width 1 +#define reg_rt_trace_rw_tap_ctrl___ack_data___bit 0 +#define reg_rt_trace_rw_tap_ctrl___ack_guru___lsb 1 +#define reg_rt_trace_rw_tap_ctrl___ack_guru___width 1 +#define reg_rt_trace_rw_tap_ctrl___ack_guru___bit 1 +#define reg_rt_trace_rw_tap_ctrl_offset 4 + +/* Register r_tap_stat, scope rt_trace, type r */ +#define reg_rt_trace_r_tap_stat___dav___lsb 0 +#define reg_rt_trace_r_tap_stat___dav___width 1 +#define reg_rt_trace_r_tap_stat___dav___bit 0 +#define reg_rt_trace_r_tap_stat___empty___lsb 1 +#define reg_rt_trace_r_tap_stat___empty___width 1 +#define reg_rt_trace_r_tap_stat___empty___bit 1 +#define reg_rt_trace_r_tap_stat_offset 8 + +/* Register rw_tap_data, scope rt_trace, type rw */ +#define reg_rt_trace_rw_tap_data_offset 12 + +/* Register rw_tap_hdata, scope rt_trace, type rw */ +#define reg_rt_trace_rw_tap_hdata___op___lsb 0 +#define reg_rt_trace_rw_tap_hdata___op___width 4 +#define reg_rt_trace_rw_tap_hdata___sub_op___lsb 4 +#define reg_rt_trace_rw_tap_hdata___sub_op___width 4 +#define reg_rt_trace_rw_tap_hdata_offset 16 + +/* Register r_redir, scope rt_trace, type r */ +#define reg_rt_trace_r_redir_offset 20 + + +/* Constants */ +#define regk_rt_trace_brk 0x0000000c +#define regk_rt_trace_dbg 0x00000003 +#define regk_rt_trace_dbgdi 0x00000004 +#define regk_rt_trace_dbgdo 0x00000005 +#define regk_rt_trace_gmode 0x00000000 +#define regk_rt_trace_no 0x00000000 +#define regk_rt_trace_nop 0x00000000 +#define regk_rt_trace_normal 0x00000000 +#define regk_rt_trace_rdmem 0x00000007 +#define regk_rt_trace_rdmemb 0x00000009 +#define regk_rt_trace_rdpreg 0x00000002 +#define regk_rt_trace_rdreg 0x00000001 +#define regk_rt_trace_rdsreg 0x00000003 +#define regk_rt_trace_redir 0x00000006 +#define regk_rt_trace_ret 0x0000000b +#define regk_rt_trace_rw_cfg_default 0x00000000 +#define regk_rt_trace_trcfg 0x00000001 +#define regk_rt_trace_wp 0x00000001 +#define regk_rt_trace_wp0 0x00000001 +#define regk_rt_trace_wp1 0x00000002 +#define regk_rt_trace_wp2 0x00000004 +#define regk_rt_trace_wp3 0x00000008 +#define regk_rt_trace_wp4 0x00000010 +#define regk_rt_trace_wp5 0x00000020 +#define regk_rt_trace_wp6 0x00000040 +#define regk_rt_trace_wrmem 0x00000008 +#define regk_rt_trace_wrmemb 0x0000000a +#define regk_rt_trace_wrpreg 0x00000005 +#define regk_rt_trace_wrreg 0x00000004 +#define regk_rt_trace_wrsreg 0x00000006 +#define regk_rt_trace_yes 0x00000001 +#endif /* __rt_trace_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/ser_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/ser_defs_asm.h new file mode 100644 index 000000000000..4a2808bdf390 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/ser_defs_asm.h @@ -0,0 +1,359 @@ +#ifndef __ser_defs_asm_h +#define __ser_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/ser/rtl/ser_regs.r + * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp + * last modfied: Mon Apr 11 16:09:21 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/ser_defs_asm.h ../../inst/ser/rtl/ser_regs.r + * id: $Id: ser_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_tr_ctrl, scope ser, type rw */ +#define reg_ser_rw_tr_ctrl___base_freq___lsb 0 +#define reg_ser_rw_tr_ctrl___base_freq___width 3 +#define reg_ser_rw_tr_ctrl___en___lsb 3 +#define reg_ser_rw_tr_ctrl___en___width 1 +#define reg_ser_rw_tr_ctrl___en___bit 3 +#define reg_ser_rw_tr_ctrl___par___lsb 4 +#define reg_ser_rw_tr_ctrl___par___width 2 +#define reg_ser_rw_tr_ctrl___par_en___lsb 6 +#define reg_ser_rw_tr_ctrl___par_en___width 1 +#define reg_ser_rw_tr_ctrl___par_en___bit 6 +#define reg_ser_rw_tr_ctrl___data_bits___lsb 7 +#define reg_ser_rw_tr_ctrl___data_bits___width 1 +#define reg_ser_rw_tr_ctrl___data_bits___bit 7 +#define reg_ser_rw_tr_ctrl___stop_bits___lsb 8 +#define reg_ser_rw_tr_ctrl___stop_bits___width 1 +#define reg_ser_rw_tr_ctrl___stop_bits___bit 8 +#define reg_ser_rw_tr_ctrl___stop___lsb 9 +#define reg_ser_rw_tr_ctrl___stop___width 1 +#define reg_ser_rw_tr_ctrl___stop___bit 9 +#define reg_ser_rw_tr_ctrl___rts_delay___lsb 10 +#define reg_ser_rw_tr_ctrl___rts_delay___width 3 +#define reg_ser_rw_tr_ctrl___rts_setup___lsb 13 +#define reg_ser_rw_tr_ctrl___rts_setup___width 1 +#define reg_ser_rw_tr_ctrl___rts_setup___bit 13 +#define reg_ser_rw_tr_ctrl___auto_rts___lsb 14 +#define reg_ser_rw_tr_ctrl___auto_rts___width 1 +#define reg_ser_rw_tr_ctrl___auto_rts___bit 14 +#define reg_ser_rw_tr_ctrl___txd___lsb 15 +#define reg_ser_rw_tr_ctrl___txd___width 1 +#define reg_ser_rw_tr_ctrl___txd___bit 15 +#define reg_ser_rw_tr_ctrl___auto_cts___lsb 16 +#define reg_ser_rw_tr_ctrl___auto_cts___width 1 +#define reg_ser_rw_tr_ctrl___auto_cts___bit 16 +#define reg_ser_rw_tr_ctrl_offset 0 + +/* Register rw_tr_dma_en, scope ser, type rw */ +#define reg_ser_rw_tr_dma_en___en___lsb 0 +#define reg_ser_rw_tr_dma_en___en___width 1 +#define reg_ser_rw_tr_dma_en___en___bit 0 +#define reg_ser_rw_tr_dma_en_offset 4 + +/* Register rw_rec_ctrl, scope ser, type rw */ +#define reg_ser_rw_rec_ctrl___base_freq___lsb 0 +#define reg_ser_rw_rec_ctrl___base_freq___width 3 +#define reg_ser_rw_rec_ctrl___en___lsb 3 +#define reg_ser_rw_rec_ctrl___en___width 1 +#define reg_ser_rw_rec_ctrl___en___bit 3 +#define reg_ser_rw_rec_ctrl___par___lsb 4 +#define reg_ser_rw_rec_ctrl___par___width 2 +#define reg_ser_rw_rec_ctrl___par_en___lsb 6 +#define reg_ser_rw_rec_ctrl___par_en___width 1 +#define reg_ser_rw_rec_ctrl___par_en___bit 6 +#define reg_ser_rw_rec_ctrl___data_bits___lsb 7 +#define reg_ser_rw_rec_ctrl___data_bits___width 1 +#define reg_ser_rw_rec_ctrl___data_bits___bit 7 +#define reg_ser_rw_rec_ctrl___dma_mode___lsb 8 +#define reg_ser_rw_rec_ctrl___dma_mode___width 1 +#define reg_ser_rw_rec_ctrl___dma_mode___bit 8 +#define reg_ser_rw_rec_ctrl___dma_err___lsb 9 +#define reg_ser_rw_rec_ctrl___dma_err___width 1 +#define reg_ser_rw_rec_ctrl___dma_err___bit 9 +#define reg_ser_rw_rec_ctrl___sampling___lsb 10 +#define reg_ser_rw_rec_ctrl___sampling___width 1 +#define reg_ser_rw_rec_ctrl___sampling___bit 10 +#define reg_ser_rw_rec_ctrl___timeout___lsb 11 +#define reg_ser_rw_rec_ctrl___timeout___width 3 +#define reg_ser_rw_rec_ctrl___auto_eop___lsb 14 +#define reg_ser_rw_rec_ctrl___auto_eop___width 1 +#define reg_ser_rw_rec_ctrl___auto_eop___bit 14 +#define reg_ser_rw_rec_ctrl___half_duplex___lsb 15 +#define reg_ser_rw_rec_ctrl___half_duplex___width 1 +#define reg_ser_rw_rec_ctrl___half_duplex___bit 15 +#define reg_ser_rw_rec_ctrl___rts_n___lsb 16 +#define reg_ser_rw_rec_ctrl___rts_n___width 1 +#define reg_ser_rw_rec_ctrl___rts_n___bit 16 +#define reg_ser_rw_rec_ctrl___loopback___lsb 17 +#define reg_ser_rw_rec_ctrl___loopback___width 1 +#define reg_ser_rw_rec_ctrl___loopback___bit 17 +#define reg_ser_rw_rec_ctrl_offset 8 + +/* Register rw_tr_baud_div, scope ser, type rw */ +#define reg_ser_rw_tr_baud_div___div___lsb 0 +#define reg_ser_rw_tr_baud_div___div___width 16 +#define reg_ser_rw_tr_baud_div_offset 12 + +/* Register rw_rec_baud_div, scope ser, type rw */ +#define reg_ser_rw_rec_baud_div___div___lsb 0 +#define reg_ser_rw_rec_baud_div___div___width 16 +#define reg_ser_rw_rec_baud_div_offset 16 + +/* Register rw_xoff, scope ser, type rw */ +#define reg_ser_rw_xoff___chr___lsb 0 +#define reg_ser_rw_xoff___chr___width 8 +#define reg_ser_rw_xoff___automatic___lsb 8 +#define reg_ser_rw_xoff___automatic___width 1 +#define reg_ser_rw_xoff___automatic___bit 8 +#define reg_ser_rw_xoff_offset 20 + +/* Register rw_xoff_clr, scope ser, type rw */ +#define reg_ser_rw_xoff_clr___clr___lsb 0 +#define reg_ser_rw_xoff_clr___clr___width 1 +#define reg_ser_rw_xoff_clr___clr___bit 0 +#define reg_ser_rw_xoff_clr_offset 24 + +/* Register rw_dout, scope ser, type rw */ +#define reg_ser_rw_dout___data___lsb 0 +#define reg_ser_rw_dout___data___width 8 +#define reg_ser_rw_dout_offset 28 + +/* Register rs_stat_din, scope ser, type rs */ +#define reg_ser_rs_stat_din___data___lsb 0 +#define reg_ser_rs_stat_din___data___width 8 +#define reg_ser_rs_stat_din___dav___lsb 16 +#define reg_ser_rs_stat_din___dav___width 1 +#define reg_ser_rs_stat_din___dav___bit 16 +#define reg_ser_rs_stat_din___framing_err___lsb 17 +#define reg_ser_rs_stat_din___framing_err___width 1 +#define reg_ser_rs_stat_din___framing_err___bit 17 +#define reg_ser_rs_stat_din___par_err___lsb 18 +#define reg_ser_rs_stat_din___par_err___width 1 +#define reg_ser_rs_stat_din___par_err___bit 18 +#define reg_ser_rs_stat_din___orun___lsb 19 +#define reg_ser_rs_stat_din___orun___width 1 +#define reg_ser_rs_stat_din___orun___bit 19 +#define reg_ser_rs_stat_din___rec_err___lsb 20 +#define reg_ser_rs_stat_din___rec_err___width 1 +#define reg_ser_rs_stat_din___rec_err___bit 20 +#define reg_ser_rs_stat_din___rxd___lsb 21 +#define reg_ser_rs_stat_din___rxd___width 1 +#define reg_ser_rs_stat_din___rxd___bit 21 +#define reg_ser_rs_stat_din___tr_idle___lsb 22 +#define reg_ser_rs_stat_din___tr_idle___width 1 +#define reg_ser_rs_stat_din___tr_idle___bit 22 +#define reg_ser_rs_stat_din___tr_empty___lsb 23 +#define reg_ser_rs_stat_din___tr_empty___width 1 +#define reg_ser_rs_stat_din___tr_empty___bit 23 +#define reg_ser_rs_stat_din___tr_rdy___lsb 24 +#define reg_ser_rs_stat_din___tr_rdy___width 1 +#define reg_ser_rs_stat_din___tr_rdy___bit 24 +#define reg_ser_rs_stat_din___cts_n___lsb 25 +#define reg_ser_rs_stat_din___cts_n___width 1 +#define reg_ser_rs_stat_din___cts_n___bit 25 +#define reg_ser_rs_stat_din___xoff_detect___lsb 26 +#define reg_ser_rs_stat_din___xoff_detect___width 1 +#define reg_ser_rs_stat_din___xoff_detect___bit 26 +#define reg_ser_rs_stat_din___rts_n___lsb 27 +#define reg_ser_rs_stat_din___rts_n___width 1 +#define reg_ser_rs_stat_din___rts_n___bit 27 +#define reg_ser_rs_stat_din___txd___lsb 28 +#define reg_ser_rs_stat_din___txd___width 1 +#define reg_ser_rs_stat_din___txd___bit 28 +#define reg_ser_rs_stat_din_offset 32 + +/* Register r_stat_din, scope ser, type r */ +#define reg_ser_r_stat_din___data___lsb 0 +#define reg_ser_r_stat_din___data___width 8 +#define reg_ser_r_stat_din___dav___lsb 16 +#define reg_ser_r_stat_din___dav___width 1 +#define reg_ser_r_stat_din___dav___bit 16 +#define reg_ser_r_stat_din___framing_err___lsb 17 +#define reg_ser_r_stat_din___framing_err___width 1 +#define reg_ser_r_stat_din___framing_err___bit 17 +#define reg_ser_r_stat_din___par_err___lsb 18 +#define reg_ser_r_stat_din___par_err___width 1 +#define reg_ser_r_stat_din___par_err___bit 18 +#define reg_ser_r_stat_din___orun___lsb 19 +#define reg_ser_r_stat_din___orun___width 1 +#define reg_ser_r_stat_din___orun___bit 19 +#define reg_ser_r_stat_din___rec_err___lsb 20 +#define reg_ser_r_stat_din___rec_err___width 1 +#define reg_ser_r_stat_din___rec_err___bit 20 +#define reg_ser_r_stat_din___rxd___lsb 21 +#define reg_ser_r_stat_din___rxd___width 1 +#define reg_ser_r_stat_din___rxd___bit 21 +#define reg_ser_r_stat_din___tr_idle___lsb 22 +#define reg_ser_r_stat_din___tr_idle___width 1 +#define reg_ser_r_stat_din___tr_idle___bit 22 +#define reg_ser_r_stat_din___tr_empty___lsb 23 +#define reg_ser_r_stat_din___tr_empty___width 1 +#define reg_ser_r_stat_din___tr_empty___bit 23 +#define reg_ser_r_stat_din___tr_rdy___lsb 24 +#define reg_ser_r_stat_din___tr_rdy___width 1 +#define reg_ser_r_stat_din___tr_rdy___bit 24 +#define reg_ser_r_stat_din___cts_n___lsb 25 +#define reg_ser_r_stat_din___cts_n___width 1 +#define reg_ser_r_stat_din___cts_n___bit 25 +#define reg_ser_r_stat_din___xoff_detect___lsb 26 +#define reg_ser_r_stat_din___xoff_detect___width 1 +#define reg_ser_r_stat_din___xoff_detect___bit 26 +#define reg_ser_r_stat_din___rts_n___lsb 27 +#define reg_ser_r_stat_din___rts_n___width 1 +#define reg_ser_r_stat_din___rts_n___bit 27 +#define reg_ser_r_stat_din___txd___lsb 28 +#define reg_ser_r_stat_din___txd___width 1 +#define reg_ser_r_stat_din___txd___bit 28 +#define reg_ser_r_stat_din_offset 36 + +/* Register rw_rec_eop, scope ser, type rw */ +#define reg_ser_rw_rec_eop___set___lsb 0 +#define reg_ser_rw_rec_eop___set___width 1 +#define reg_ser_rw_rec_eop___set___bit 0 +#define reg_ser_rw_rec_eop_offset 40 + +/* Register rw_intr_mask, scope ser, type rw */ +#define reg_ser_rw_intr_mask___tr_rdy___lsb 0 +#define reg_ser_rw_intr_mask___tr_rdy___width 1 +#define reg_ser_rw_intr_mask___tr_rdy___bit 0 +#define reg_ser_rw_intr_mask___tr_empty___lsb 1 +#define reg_ser_rw_intr_mask___tr_empty___width 1 +#define reg_ser_rw_intr_mask___tr_empty___bit 1 +#define reg_ser_rw_intr_mask___tr_idle___lsb 2 +#define reg_ser_rw_intr_mask___tr_idle___width 1 +#define reg_ser_rw_intr_mask___tr_idle___bit 2 +#define reg_ser_rw_intr_mask___dav___lsb 3 +#define reg_ser_rw_intr_mask___dav___width 1 +#define reg_ser_rw_intr_mask___dav___bit 3 +#define reg_ser_rw_intr_mask_offset 44 + +/* Register rw_ack_intr, scope ser, type rw */ +#define reg_ser_rw_ack_intr___tr_rdy___lsb 0 +#define reg_ser_rw_ack_intr___tr_rdy___width 1 +#define reg_ser_rw_ack_intr___tr_rdy___bit 0 +#define reg_ser_rw_ack_intr___tr_empty___lsb 1 +#define reg_ser_rw_ack_intr___tr_empty___width 1 +#define reg_ser_rw_ack_intr___tr_empty___bit 1 +#define reg_ser_rw_ack_intr___tr_idle___lsb 2 +#define reg_ser_rw_ack_intr___tr_idle___width 1 +#define reg_ser_rw_ack_intr___tr_idle___bit 2 +#define reg_ser_rw_ack_intr___dav___lsb 3 +#define reg_ser_rw_ack_intr___dav___width 1 +#define reg_ser_rw_ack_intr___dav___bit 3 +#define reg_ser_rw_ack_intr_offset 48 + +/* Register r_intr, scope ser, type r */ +#define reg_ser_r_intr___tr_rdy___lsb 0 +#define reg_ser_r_intr___tr_rdy___width 1 +#define reg_ser_r_intr___tr_rdy___bit 0 +#define reg_ser_r_intr___tr_empty___lsb 1 +#define reg_ser_r_intr___tr_empty___width 1 +#define reg_ser_r_intr___tr_empty___bit 1 +#define reg_ser_r_intr___tr_idle___lsb 2 +#define reg_ser_r_intr___tr_idle___width 1 +#define reg_ser_r_intr___tr_idle___bit 2 +#define reg_ser_r_intr___dav___lsb 3 +#define reg_ser_r_intr___dav___width 1 +#define reg_ser_r_intr___dav___bit 3 +#define reg_ser_r_intr_offset 52 + +/* Register r_masked_intr, scope ser, type r */ +#define reg_ser_r_masked_intr___tr_rdy___lsb 0 +#define reg_ser_r_masked_intr___tr_rdy___width 1 +#define reg_ser_r_masked_intr___tr_rdy___bit 0 +#define reg_ser_r_masked_intr___tr_empty___lsb 1 +#define reg_ser_r_masked_intr___tr_empty___width 1 +#define reg_ser_r_masked_intr___tr_empty___bit 1 +#define reg_ser_r_masked_intr___tr_idle___lsb 2 +#define reg_ser_r_masked_intr___tr_idle___width 1 +#define reg_ser_r_masked_intr___tr_idle___bit 2 +#define reg_ser_r_masked_intr___dav___lsb 3 +#define reg_ser_r_masked_intr___dav___width 1 +#define reg_ser_r_masked_intr___dav___bit 3 +#define reg_ser_r_masked_intr_offset 56 + + +/* Constants */ +#define regk_ser_active 0x00000000 +#define regk_ser_bits1 0x00000000 +#define regk_ser_bits2 0x00000001 +#define regk_ser_bits7 0x00000001 +#define regk_ser_bits8 0x00000000 +#define regk_ser_del0_5 0x00000000 +#define regk_ser_del1 0x00000001 +#define regk_ser_del1_5 0x00000002 +#define regk_ser_del2 0x00000003 +#define regk_ser_del2_5 0x00000004 +#define regk_ser_del3 0x00000005 +#define regk_ser_del3_5 0x00000006 +#define regk_ser_del4 0x00000007 +#define regk_ser_even 0x00000000 +#define regk_ser_ext 0x00000001 +#define regk_ser_f100 0x00000007 +#define regk_ser_f29_493 0x00000004 +#define regk_ser_f32 0x00000005 +#define regk_ser_f32_768 0x00000006 +#define regk_ser_ignore 0x00000001 +#define regk_ser_inactive 0x00000001 +#define regk_ser_majority 0x00000001 +#define regk_ser_mark 0x00000002 +#define regk_ser_middle 0x00000000 +#define regk_ser_no 0x00000000 +#define regk_ser_odd 0x00000001 +#define regk_ser_off 0x00000000 +#define regk_ser_rw_intr_mask_default 0x00000000 +#define regk_ser_rw_rec_baud_div_default 0x00000000 +#define regk_ser_rw_rec_ctrl_default 0x00010000 +#define regk_ser_rw_tr_baud_div_default 0x00000000 +#define regk_ser_rw_tr_ctrl_default 0x00008000 +#define regk_ser_rw_tr_dma_en_default 0x00000000 +#define regk_ser_rw_xoff_default 0x00000000 +#define regk_ser_space 0x00000003 +#define regk_ser_stop 0x00000000 +#define regk_ser_yes 0x00000001 +#endif /* __ser_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/sser_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/sser_defs_asm.h new file mode 100644 index 000000000000..27d4d91b3abd --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/sser_defs_asm.h @@ -0,0 +1,462 @@ +#ifndef __sser_defs_asm_h +#define __sser_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/syncser/rtl/sser_regs.r + * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp + * last modfied: Mon Apr 11 16:09:48 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/sser_defs_asm.h ../../inst/syncser/rtl/sser_regs.r + * id: $Id: sser_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope sser, type rw */ +#define reg_sser_rw_cfg___clk_div___lsb 0 +#define reg_sser_rw_cfg___clk_div___width 16 +#define reg_sser_rw_cfg___base_freq___lsb 16 +#define reg_sser_rw_cfg___base_freq___width 3 +#define reg_sser_rw_cfg___gate_clk___lsb 19 +#define reg_sser_rw_cfg___gate_clk___width 1 +#define reg_sser_rw_cfg___gate_clk___bit 19 +#define reg_sser_rw_cfg___clkgate_ctrl___lsb 20 +#define reg_sser_rw_cfg___clkgate_ctrl___width 1 +#define reg_sser_rw_cfg___clkgate_ctrl___bit 20 +#define reg_sser_rw_cfg___clkgate_in___lsb 21 +#define reg_sser_rw_cfg___clkgate_in___width 1 +#define reg_sser_rw_cfg___clkgate_in___bit 21 +#define reg_sser_rw_cfg___clk_dir___lsb 22 +#define reg_sser_rw_cfg___clk_dir___width 1 +#define reg_sser_rw_cfg___clk_dir___bit 22 +#define reg_sser_rw_cfg___clk_od_mode___lsb 23 +#define reg_sser_rw_cfg___clk_od_mode___width 1 +#define reg_sser_rw_cfg___clk_od_mode___bit 23 +#define reg_sser_rw_cfg___out_clk_pol___lsb 24 +#define reg_sser_rw_cfg___out_clk_pol___width 1 +#define reg_sser_rw_cfg___out_clk_pol___bit 24 +#define reg_sser_rw_cfg___out_clk_src___lsb 25 +#define reg_sser_rw_cfg___out_clk_src___width 2 +#define reg_sser_rw_cfg___clk_in_sel___lsb 27 +#define reg_sser_rw_cfg___clk_in_sel___width 1 +#define reg_sser_rw_cfg___clk_in_sel___bit 27 +#define reg_sser_rw_cfg___hold_pol___lsb 28 +#define reg_sser_rw_cfg___hold_pol___width 1 +#define reg_sser_rw_cfg___hold_pol___bit 28 +#define reg_sser_rw_cfg___prepare___lsb 29 +#define reg_sser_rw_cfg___prepare___width 1 +#define reg_sser_rw_cfg___prepare___bit 29 +#define reg_sser_rw_cfg___en___lsb 30 +#define reg_sser_rw_cfg___en___width 1 +#define reg_sser_rw_cfg___en___bit 30 +#define reg_sser_rw_cfg_offset 0 + +/* Register rw_frm_cfg, scope sser, type rw */ +#define reg_sser_rw_frm_cfg___wordrate___lsb 0 +#define reg_sser_rw_frm_cfg___wordrate___width 10 +#define reg_sser_rw_frm_cfg___rec_delay___lsb 10 +#define reg_sser_rw_frm_cfg___rec_delay___width 3 +#define reg_sser_rw_frm_cfg___tr_delay___lsb 13 +#define reg_sser_rw_frm_cfg___tr_delay___width 3 +#define reg_sser_rw_frm_cfg___early_wend___lsb 16 +#define reg_sser_rw_frm_cfg___early_wend___width 1 +#define reg_sser_rw_frm_cfg___early_wend___bit 16 +#define reg_sser_rw_frm_cfg___level___lsb 17 +#define reg_sser_rw_frm_cfg___level___width 2 +#define reg_sser_rw_frm_cfg___type___lsb 19 +#define reg_sser_rw_frm_cfg___type___width 1 +#define reg_sser_rw_frm_cfg___type___bit 19 +#define reg_sser_rw_frm_cfg___clk_pol___lsb 20 +#define reg_sser_rw_frm_cfg___clk_pol___width 1 +#define reg_sser_rw_frm_cfg___clk_pol___bit 20 +#define reg_sser_rw_frm_cfg___fr_in_rxclk___lsb 21 +#define reg_sser_rw_frm_cfg___fr_in_rxclk___width 1 +#define reg_sser_rw_frm_cfg___fr_in_rxclk___bit 21 +#define reg_sser_rw_frm_cfg___clk_src___lsb 22 +#define reg_sser_rw_frm_cfg___clk_src___width 1 +#define reg_sser_rw_frm_cfg___clk_src___bit 22 +#define reg_sser_rw_frm_cfg___out_off___lsb 23 +#define reg_sser_rw_frm_cfg___out_off___width 1 +#define reg_sser_rw_frm_cfg___out_off___bit 23 +#define reg_sser_rw_frm_cfg___out_on___lsb 24 +#define reg_sser_rw_frm_cfg___out_on___width 1 +#define reg_sser_rw_frm_cfg___out_on___bit 24 +#define reg_sser_rw_frm_cfg___frame_pin_dir___lsb 25 +#define reg_sser_rw_frm_cfg___frame_pin_dir___width 1 +#define reg_sser_rw_frm_cfg___frame_pin_dir___bit 25 +#define reg_sser_rw_frm_cfg___frame_pin_use___lsb 26 +#define reg_sser_rw_frm_cfg___frame_pin_use___width 2 +#define reg_sser_rw_frm_cfg___status_pin_dir___lsb 28 +#define reg_sser_rw_frm_cfg___status_pin_dir___width 1 +#define reg_sser_rw_frm_cfg___status_pin_dir___bit 28 +#define reg_sser_rw_frm_cfg___status_pin_use___lsb 29 +#define reg_sser_rw_frm_cfg___status_pin_use___width 2 +#define reg_sser_rw_frm_cfg_offset 4 + +/* Register rw_tr_cfg, scope sser, type rw */ +#define reg_sser_rw_tr_cfg___tr_en___lsb 0 +#define reg_sser_rw_tr_cfg___tr_en___width 1 +#define reg_sser_rw_tr_cfg___tr_en___bit 0 +#define reg_sser_rw_tr_cfg___stop___lsb 1 +#define reg_sser_rw_tr_cfg___stop___width 1 +#define reg_sser_rw_tr_cfg___stop___bit 1 +#define reg_sser_rw_tr_cfg___urun_stop___lsb 2 +#define reg_sser_rw_tr_cfg___urun_stop___width 1 +#define reg_sser_rw_tr_cfg___urun_stop___bit 2 +#define reg_sser_rw_tr_cfg___eop_stop___lsb 3 +#define reg_sser_rw_tr_cfg___eop_stop___width 1 +#define reg_sser_rw_tr_cfg___eop_stop___bit 3 +#define reg_sser_rw_tr_cfg___sample_size___lsb 4 +#define reg_sser_rw_tr_cfg___sample_size___width 6 +#define reg_sser_rw_tr_cfg___sh_dir___lsb 10 +#define reg_sser_rw_tr_cfg___sh_dir___width 1 +#define reg_sser_rw_tr_cfg___sh_dir___bit 10 +#define reg_sser_rw_tr_cfg___clk_pol___lsb 11 +#define reg_sser_rw_tr_cfg___clk_pol___width 1 +#define reg_sser_rw_tr_cfg___clk_pol___bit 11 +#define reg_sser_rw_tr_cfg___clk_src___lsb 12 +#define reg_sser_rw_tr_cfg___clk_src___width 1 +#define reg_sser_rw_tr_cfg___clk_src___bit 12 +#define reg_sser_rw_tr_cfg___use_dma___lsb 13 +#define reg_sser_rw_tr_cfg___use_dma___width 1 +#define reg_sser_rw_tr_cfg___use_dma___bit 13 +#define reg_sser_rw_tr_cfg___mode___lsb 14 +#define reg_sser_rw_tr_cfg___mode___width 2 +#define reg_sser_rw_tr_cfg___frm_src___lsb 16 +#define reg_sser_rw_tr_cfg___frm_src___width 1 +#define reg_sser_rw_tr_cfg___frm_src___bit 16 +#define reg_sser_rw_tr_cfg___use60958___lsb 17 +#define reg_sser_rw_tr_cfg___use60958___width 1 +#define reg_sser_rw_tr_cfg___use60958___bit 17 +#define reg_sser_rw_tr_cfg___iec60958_ckdiv___lsb 18 +#define reg_sser_rw_tr_cfg___iec60958_ckdiv___width 2 +#define reg_sser_rw_tr_cfg___rate_ctrl___lsb 20 +#define reg_sser_rw_tr_cfg___rate_ctrl___width 1 +#define reg_sser_rw_tr_cfg___rate_ctrl___bit 20 +#define reg_sser_rw_tr_cfg___use_md___lsb 21 +#define reg_sser_rw_tr_cfg___use_md___width 1 +#define reg_sser_rw_tr_cfg___use_md___bit 21 +#define reg_sser_rw_tr_cfg___dual_i2s___lsb 22 +#define reg_sser_rw_tr_cfg___dual_i2s___width 1 +#define reg_sser_rw_tr_cfg___dual_i2s___bit 22 +#define reg_sser_rw_tr_cfg___data_pin_use___lsb 23 +#define reg_sser_rw_tr_cfg___data_pin_use___width 2 +#define reg_sser_rw_tr_cfg___od_mode___lsb 25 +#define reg_sser_rw_tr_cfg___od_mode___width 1 +#define reg_sser_rw_tr_cfg___od_mode___bit 25 +#define reg_sser_rw_tr_cfg___bulk_wspace___lsb 26 +#define reg_sser_rw_tr_cfg___bulk_wspace___width 2 +#define reg_sser_rw_tr_cfg_offset 8 + +/* Register rw_rec_cfg, scope sser, type rw */ +#define reg_sser_rw_rec_cfg___rec_en___lsb 0 +#define reg_sser_rw_rec_cfg___rec_en___width 1 +#define reg_sser_rw_rec_cfg___rec_en___bit 0 +#define reg_sser_rw_rec_cfg___force_eop___lsb 1 +#define reg_sser_rw_rec_cfg___force_eop___width 1 +#define reg_sser_rw_rec_cfg___force_eop___bit 1 +#define reg_sser_rw_rec_cfg___stop___lsb 2 +#define reg_sser_rw_rec_cfg___stop___width 1 +#define reg_sser_rw_rec_cfg___stop___bit 2 +#define reg_sser_rw_rec_cfg___orun_stop___lsb 3 +#define reg_sser_rw_rec_cfg___orun_stop___width 1 +#define reg_sser_rw_rec_cfg___orun_stop___bit 3 +#define reg_sser_rw_rec_cfg___eop_stop___lsb 4 +#define reg_sser_rw_rec_cfg___eop_stop___width 1 +#define reg_sser_rw_rec_cfg___eop_stop___bit 4 +#define reg_sser_rw_rec_cfg___sample_size___lsb 5 +#define reg_sser_rw_rec_cfg___sample_size___width 6 +#define reg_sser_rw_rec_cfg___sh_dir___lsb 11 +#define reg_sser_rw_rec_cfg___sh_dir___width 1 +#define reg_sser_rw_rec_cfg___sh_dir___bit 11 +#define reg_sser_rw_rec_cfg___clk_pol___lsb 12 +#define reg_sser_rw_rec_cfg___clk_pol___width 1 +#define reg_sser_rw_rec_cfg___clk_pol___bit 12 +#define reg_sser_rw_rec_cfg___clk_src___lsb 13 +#define reg_sser_rw_rec_cfg___clk_src___width 1 +#define reg_sser_rw_rec_cfg___clk_src___bit 13 +#define reg_sser_rw_rec_cfg___use_dma___lsb 14 +#define reg_sser_rw_rec_cfg___use_dma___width 1 +#define reg_sser_rw_rec_cfg___use_dma___bit 14 +#define reg_sser_rw_rec_cfg___mode___lsb 15 +#define reg_sser_rw_rec_cfg___mode___width 2 +#define reg_sser_rw_rec_cfg___frm_src___lsb 17 +#define reg_sser_rw_rec_cfg___frm_src___width 2 +#define reg_sser_rw_rec_cfg___use60958___lsb 19 +#define reg_sser_rw_rec_cfg___use60958___width 1 +#define reg_sser_rw_rec_cfg___use60958___bit 19 +#define reg_sser_rw_rec_cfg___iec60958_ui_len___lsb 20 +#define reg_sser_rw_rec_cfg___iec60958_ui_len___width 5 +#define reg_sser_rw_rec_cfg___slave2_en___lsb 25 +#define reg_sser_rw_rec_cfg___slave2_en___width 1 +#define reg_sser_rw_rec_cfg___slave2_en___bit 25 +#define reg_sser_rw_rec_cfg___slave3_en___lsb 26 +#define reg_sser_rw_rec_cfg___slave3_en___width 1 +#define reg_sser_rw_rec_cfg___slave3_en___bit 26 +#define reg_sser_rw_rec_cfg___fifo_thr___lsb 27 +#define reg_sser_rw_rec_cfg___fifo_thr___width 2 +#define reg_sser_rw_rec_cfg_offset 12 + +/* Register rw_tr_data, scope sser, type rw */ +#define reg_sser_rw_tr_data___data___lsb 0 +#define reg_sser_rw_tr_data___data___width 16 +#define reg_sser_rw_tr_data___md___lsb 16 +#define reg_sser_rw_tr_data___md___width 1 +#define reg_sser_rw_tr_data___md___bit 16 +#define reg_sser_rw_tr_data_offset 16 + +/* Register r_rec_data, scope sser, type r */ +#define reg_sser_r_rec_data___data___lsb 0 +#define reg_sser_r_rec_data___data___width 16 +#define reg_sser_r_rec_data___md___lsb 16 +#define reg_sser_r_rec_data___md___width 1 +#define reg_sser_r_rec_data___md___bit 16 +#define reg_sser_r_rec_data___ext_clk___lsb 17 +#define reg_sser_r_rec_data___ext_clk___width 1 +#define reg_sser_r_rec_data___ext_clk___bit 17 +#define reg_sser_r_rec_data___status_in___lsb 18 +#define reg_sser_r_rec_data___status_in___width 1 +#define reg_sser_r_rec_data___status_in___bit 18 +#define reg_sser_r_rec_data___frame_in___lsb 19 +#define reg_sser_r_rec_data___frame_in___width 1 +#define reg_sser_r_rec_data___frame_in___bit 19 +#define reg_sser_r_rec_data___din___lsb 20 +#define reg_sser_r_rec_data___din___width 1 +#define reg_sser_r_rec_data___din___bit 20 +#define reg_sser_r_rec_data___data_in___lsb 21 +#define reg_sser_r_rec_data___data_in___width 1 +#define reg_sser_r_rec_data___data_in___bit 21 +#define reg_sser_r_rec_data___clk_in___lsb 22 +#define reg_sser_r_rec_data___clk_in___width 1 +#define reg_sser_r_rec_data___clk_in___bit 22 +#define reg_sser_r_rec_data_offset 20 + +/* Register rw_extra, scope sser, type rw */ +#define reg_sser_rw_extra___clkoff_cycles___lsb 0 +#define reg_sser_rw_extra___clkoff_cycles___width 20 +#define reg_sser_rw_extra___clkoff_en___lsb 20 +#define reg_sser_rw_extra___clkoff_en___width 1 +#define reg_sser_rw_extra___clkoff_en___bit 20 +#define reg_sser_rw_extra___clkon_en___lsb 21 +#define reg_sser_rw_extra___clkon_en___width 1 +#define reg_sser_rw_extra___clkon_en___bit 21 +#define reg_sser_rw_extra___dout_delay___lsb 22 +#define reg_sser_rw_extra___dout_delay___width 5 +#define reg_sser_rw_extra_offset 24 + +/* Register rw_intr_mask, scope sser, type rw */ +#define reg_sser_rw_intr_mask___trdy___lsb 0 +#define reg_sser_rw_intr_mask___trdy___width 1 +#define reg_sser_rw_intr_mask___trdy___bit 0 +#define reg_sser_rw_intr_mask___rdav___lsb 1 +#define reg_sser_rw_intr_mask___rdav___width 1 +#define reg_sser_rw_intr_mask___rdav___bit 1 +#define reg_sser_rw_intr_mask___tidle___lsb 2 +#define reg_sser_rw_intr_mask___tidle___width 1 +#define reg_sser_rw_intr_mask___tidle___bit 2 +#define reg_sser_rw_intr_mask___rstop___lsb 3 +#define reg_sser_rw_intr_mask___rstop___width 1 +#define reg_sser_rw_intr_mask___rstop___bit 3 +#define reg_sser_rw_intr_mask___urun___lsb 4 +#define reg_sser_rw_intr_mask___urun___width 1 +#define reg_sser_rw_intr_mask___urun___bit 4 +#define reg_sser_rw_intr_mask___orun___lsb 5 +#define reg_sser_rw_intr_mask___orun___width 1 +#define reg_sser_rw_intr_mask___orun___bit 5 +#define reg_sser_rw_intr_mask___md_rec___lsb 6 +#define reg_sser_rw_intr_mask___md_rec___width 1 +#define reg_sser_rw_intr_mask___md_rec___bit 6 +#define reg_sser_rw_intr_mask___md_sent___lsb 7 +#define reg_sser_rw_intr_mask___md_sent___width 1 +#define reg_sser_rw_intr_mask___md_sent___bit 7 +#define reg_sser_rw_intr_mask___r958err___lsb 8 +#define reg_sser_rw_intr_mask___r958err___width 1 +#define reg_sser_rw_intr_mask___r958err___bit 8 +#define reg_sser_rw_intr_mask_offset 28 + +/* Register rw_ack_intr, scope sser, type rw */ +#define reg_sser_rw_ack_intr___trdy___lsb 0 +#define reg_sser_rw_ack_intr___trdy___width 1 +#define reg_sser_rw_ack_intr___trdy___bit 0 +#define reg_sser_rw_ack_intr___rdav___lsb 1 +#define reg_sser_rw_ack_intr___rdav___width 1 +#define reg_sser_rw_ack_intr___rdav___bit 1 +#define reg_sser_rw_ack_intr___tidle___lsb 2 +#define reg_sser_rw_ack_intr___tidle___width 1 +#define reg_sser_rw_ack_intr___tidle___bit 2 +#define reg_sser_rw_ack_intr___rstop___lsb 3 +#define reg_sser_rw_ack_intr___rstop___width 1 +#define reg_sser_rw_ack_intr___rstop___bit 3 +#define reg_sser_rw_ack_intr___urun___lsb 4 +#define reg_sser_rw_ack_intr___urun___width 1 +#define reg_sser_rw_ack_intr___urun___bit 4 +#define reg_sser_rw_ack_intr___orun___lsb 5 +#define reg_sser_rw_ack_intr___orun___width 1 +#define reg_sser_rw_ack_intr___orun___bit 5 +#define reg_sser_rw_ack_intr___md_rec___lsb 6 +#define reg_sser_rw_ack_intr___md_rec___width 1 +#define reg_sser_rw_ack_intr___md_rec___bit 6 +#define reg_sser_rw_ack_intr___md_sent___lsb 7 +#define reg_sser_rw_ack_intr___md_sent___width 1 +#define reg_sser_rw_ack_intr___md_sent___bit 7 +#define reg_sser_rw_ack_intr___r958err___lsb 8 +#define reg_sser_rw_ack_intr___r958err___width 1 +#define reg_sser_rw_ack_intr___r958err___bit 8 +#define reg_sser_rw_ack_intr_offset 32 + +/* Register r_intr, scope sser, type r */ +#define reg_sser_r_intr___trdy___lsb 0 +#define reg_sser_r_intr___trdy___width 1 +#define reg_sser_r_intr___trdy___bit 0 +#define reg_sser_r_intr___rdav___lsb 1 +#define reg_sser_r_intr___rdav___width 1 +#define reg_sser_r_intr___rdav___bit 1 +#define reg_sser_r_intr___tidle___lsb 2 +#define reg_sser_r_intr___tidle___width 1 +#define reg_sser_r_intr___tidle___bit 2 +#define reg_sser_r_intr___rstop___lsb 3 +#define reg_sser_r_intr___rstop___width 1 +#define reg_sser_r_intr___rstop___bit 3 +#define reg_sser_r_intr___urun___lsb 4 +#define reg_sser_r_intr___urun___width 1 +#define reg_sser_r_intr___urun___bit 4 +#define reg_sser_r_intr___orun___lsb 5 +#define reg_sser_r_intr___orun___width 1 +#define reg_sser_r_intr___orun___bit 5 +#define reg_sser_r_intr___md_rec___lsb 6 +#define reg_sser_r_intr___md_rec___width 1 +#define reg_sser_r_intr___md_rec___bit 6 +#define reg_sser_r_intr___md_sent___lsb 7 +#define reg_sser_r_intr___md_sent___width 1 +#define reg_sser_r_intr___md_sent___bit 7 +#define reg_sser_r_intr___r958err___lsb 8 +#define reg_sser_r_intr___r958err___width 1 +#define reg_sser_r_intr___r958err___bit 8 +#define reg_sser_r_intr_offset 36 + +/* Register r_masked_intr, scope sser, type r */ +#define reg_sser_r_masked_intr___trdy___lsb 0 +#define reg_sser_r_masked_intr___trdy___width 1 +#define reg_sser_r_masked_intr___trdy___bit 0 +#define reg_sser_r_masked_intr___rdav___lsb 1 +#define reg_sser_r_masked_intr___rdav___width 1 +#define reg_sser_r_masked_intr___rdav___bit 1 +#define reg_sser_r_masked_intr___tidle___lsb 2 +#define reg_sser_r_masked_intr___tidle___width 1 +#define reg_sser_r_masked_intr___tidle___bit 2 +#define reg_sser_r_masked_intr___rstop___lsb 3 +#define reg_sser_r_masked_intr___rstop___width 1 +#define reg_sser_r_masked_intr___rstop___bit 3 +#define reg_sser_r_masked_intr___urun___lsb 4 +#define reg_sser_r_masked_intr___urun___width 1 +#define reg_sser_r_masked_intr___urun___bit 4 +#define reg_sser_r_masked_intr___orun___lsb 5 +#define reg_sser_r_masked_intr___orun___width 1 +#define reg_sser_r_masked_intr___orun___bit 5 +#define reg_sser_r_masked_intr___md_rec___lsb 6 +#define reg_sser_r_masked_intr___md_rec___width 1 +#define reg_sser_r_masked_intr___md_rec___bit 6 +#define reg_sser_r_masked_intr___md_sent___lsb 7 +#define reg_sser_r_masked_intr___md_sent___width 1 +#define reg_sser_r_masked_intr___md_sent___bit 7 +#define reg_sser_r_masked_intr___r958err___lsb 8 +#define reg_sser_r_masked_intr___r958err___width 1 +#define reg_sser_r_masked_intr___r958err___bit 8 +#define reg_sser_r_masked_intr_offset 40 + + +/* Constants */ +#define regk_sser_both 0x00000002 +#define regk_sser_bulk 0x00000001 +#define regk_sser_clk100 0x00000000 +#define regk_sser_clk_in 0x00000000 +#define regk_sser_const0 0x00000003 +#define regk_sser_dout 0x00000002 +#define regk_sser_edge 0x00000000 +#define regk_sser_ext 0x00000001 +#define regk_sser_ext_clk 0x00000001 +#define regk_sser_f100 0x00000000 +#define regk_sser_f29_493 0x00000004 +#define regk_sser_f32 0x00000005 +#define regk_sser_f32_768 0x00000006 +#define regk_sser_frm 0x00000003 +#define regk_sser_gio0 0x00000000 +#define regk_sser_gio1 0x00000001 +#define regk_sser_hispeed 0x00000001 +#define regk_sser_hold 0x00000002 +#define regk_sser_in 0x00000000 +#define regk_sser_inf 0x00000003 +#define regk_sser_intern 0x00000000 +#define regk_sser_intern_clk 0x00000001 +#define regk_sser_intern_tb 0x00000000 +#define regk_sser_iso 0x00000000 +#define regk_sser_level 0x00000001 +#define regk_sser_lospeed 0x00000000 +#define regk_sser_lsbfirst 0x00000000 +#define regk_sser_msbfirst 0x00000001 +#define regk_sser_neg 0x00000001 +#define regk_sser_neg_lo 0x00000000 +#define regk_sser_no 0x00000000 +#define regk_sser_no_clk 0x00000007 +#define regk_sser_nojitter 0x00000002 +#define regk_sser_out 0x00000001 +#define regk_sser_pos 0x00000000 +#define regk_sser_pos_hi 0x00000001 +#define regk_sser_rec 0x00000000 +#define regk_sser_rw_cfg_default 0x00000000 +#define regk_sser_rw_extra_default 0x00000000 +#define regk_sser_rw_frm_cfg_default 0x00000000 +#define regk_sser_rw_intr_mask_default 0x00000000 +#define regk_sser_rw_rec_cfg_default 0x00000000 +#define regk_sser_rw_tr_cfg_default 0x01800000 +#define regk_sser_rw_tr_data_default 0x00000000 +#define regk_sser_thr16 0x00000001 +#define regk_sser_thr32 0x00000002 +#define regk_sser_thr8 0x00000000 +#define regk_sser_tr 0x00000001 +#define regk_sser_ts_out 0x00000003 +#define regk_sser_tx_bulk 0x00000002 +#define regk_sser_wiresave 0x00000002 +#define regk_sser_yes 0x00000001 +#endif /* __sser_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/strcop_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/strcop_defs_asm.h new file mode 100644 index 000000000000..55083e6aec93 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/strcop_defs_asm.h @@ -0,0 +1,84 @@ +#ifndef __strcop_defs_asm_h +#define __strcop_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/strcop/rtl/strcop_regs.r + * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp + * last modfied: Mon Apr 11 16:09:38 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/strcop_defs_asm.h ../../inst/strcop/rtl/strcop_regs.r + * id: $Id: strcop_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope strcop, type rw */ +#define reg_strcop_rw_cfg___td3___lsb 0 +#define reg_strcop_rw_cfg___td3___width 1 +#define reg_strcop_rw_cfg___td3___bit 0 +#define reg_strcop_rw_cfg___td2___lsb 1 +#define reg_strcop_rw_cfg___td2___width 1 +#define reg_strcop_rw_cfg___td2___bit 1 +#define reg_strcop_rw_cfg___td1___lsb 2 +#define reg_strcop_rw_cfg___td1___width 1 +#define reg_strcop_rw_cfg___td1___bit 2 +#define reg_strcop_rw_cfg___ipend___lsb 3 +#define reg_strcop_rw_cfg___ipend___width 1 +#define reg_strcop_rw_cfg___ipend___bit 3 +#define reg_strcop_rw_cfg___ignore_sync___lsb 4 +#define reg_strcop_rw_cfg___ignore_sync___width 1 +#define reg_strcop_rw_cfg___ignore_sync___bit 4 +#define reg_strcop_rw_cfg___en___lsb 5 +#define reg_strcop_rw_cfg___en___width 1 +#define reg_strcop_rw_cfg___en___bit 5 +#define reg_strcop_rw_cfg_offset 0 + + +/* Constants */ +#define regk_strcop_big 0x00000001 +#define regk_strcop_d 0x00000001 +#define regk_strcop_e 0x00000000 +#define regk_strcop_little 0x00000000 +#define regk_strcop_rw_cfg_default 0x00000002 +#endif /* __strcop_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/strmux_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/strmux_defs_asm.h new file mode 100644 index 000000000000..69b299920f71 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/strmux_defs_asm.h @@ -0,0 +1,100 @@ +#ifndef __strmux_defs_asm_h +#define __strmux_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/strmux/rtl/guinness/strmux_regs.r + * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp + * last modfied: Mon Apr 11 16:09:43 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/strmux_defs_asm.h ../../inst/strmux/rtl/guinness/strmux_regs.r + * id: $Id: strmux_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope strmux, type rw */ +#define reg_strmux_rw_cfg___dma0___lsb 0 +#define reg_strmux_rw_cfg___dma0___width 3 +#define reg_strmux_rw_cfg___dma1___lsb 3 +#define reg_strmux_rw_cfg___dma1___width 3 +#define reg_strmux_rw_cfg___dma2___lsb 6 +#define reg_strmux_rw_cfg___dma2___width 3 +#define reg_strmux_rw_cfg___dma3___lsb 9 +#define reg_strmux_rw_cfg___dma3___width 3 +#define reg_strmux_rw_cfg___dma4___lsb 12 +#define reg_strmux_rw_cfg___dma4___width 3 +#define reg_strmux_rw_cfg___dma5___lsb 15 +#define reg_strmux_rw_cfg___dma5___width 3 +#define reg_strmux_rw_cfg___dma6___lsb 18 +#define reg_strmux_rw_cfg___dma6___width 3 +#define reg_strmux_rw_cfg___dma7___lsb 21 +#define reg_strmux_rw_cfg___dma7___width 3 +#define reg_strmux_rw_cfg___dma8___lsb 24 +#define reg_strmux_rw_cfg___dma8___width 3 +#define reg_strmux_rw_cfg___dma9___lsb 27 +#define reg_strmux_rw_cfg___dma9___width 3 +#define reg_strmux_rw_cfg_offset 0 + + +/* Constants */ +#define regk_strmux_ata 0x00000003 +#define regk_strmux_eth0 0x00000001 +#define regk_strmux_eth1 0x00000004 +#define regk_strmux_ext0 0x00000001 +#define regk_strmux_ext1 0x00000001 +#define regk_strmux_ext2 0x00000001 +#define regk_strmux_ext3 0x00000001 +#define regk_strmux_iop0 0x00000002 +#define regk_strmux_iop1 0x00000001 +#define regk_strmux_off 0x00000000 +#define regk_strmux_p21 0x00000004 +#define regk_strmux_rw_cfg_default 0x00000000 +#define regk_strmux_ser0 0x00000002 +#define regk_strmux_ser1 0x00000002 +#define regk_strmux_ser2 0x00000004 +#define regk_strmux_ser3 0x00000003 +#define regk_strmux_sser0 0x00000003 +#define regk_strmux_sser1 0x00000003 +#define regk_strmux_strcop 0x00000002 +#endif /* __strmux_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/asm/timer_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/asm/timer_defs_asm.h new file mode 100644 index 000000000000..43146021fc16 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/asm/timer_defs_asm.h @@ -0,0 +1,229 @@ +#ifndef __timer_defs_asm_h +#define __timer_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/timer/rtl/timer_regs.r + * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp + * last modfied: Mon Apr 11 16:09:53 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/timer_defs_asm.h ../../inst/timer/rtl/timer_regs.r + * id: $Id: timer_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_tmr0_div, scope timer, type rw */ +#define reg_timer_rw_tmr0_div_offset 0 + +/* Register r_tmr0_data, scope timer, type r */ +#define reg_timer_r_tmr0_data_offset 4 + +/* Register rw_tmr0_ctrl, scope timer, type rw */ +#define reg_timer_rw_tmr0_ctrl___op___lsb 0 +#define reg_timer_rw_tmr0_ctrl___op___width 2 +#define reg_timer_rw_tmr0_ctrl___freq___lsb 2 +#define reg_timer_rw_tmr0_ctrl___freq___width 3 +#define reg_timer_rw_tmr0_ctrl_offset 8 + +/* Register rw_tmr1_div, scope timer, type rw */ +#define reg_timer_rw_tmr1_div_offset 16 + +/* Register r_tmr1_data, scope timer, type r */ +#define reg_timer_r_tmr1_data_offset 20 + +/* Register rw_tmr1_ctrl, scope timer, type rw */ +#define reg_timer_rw_tmr1_ctrl___op___lsb 0 +#define reg_timer_rw_tmr1_ctrl___op___width 2 +#define reg_timer_rw_tmr1_ctrl___freq___lsb 2 +#define reg_timer_rw_tmr1_ctrl___freq___width 3 +#define reg_timer_rw_tmr1_ctrl_offset 24 + +/* Register rs_cnt_data, scope timer, type rs */ +#define reg_timer_rs_cnt_data___tmr___lsb 0 +#define reg_timer_rs_cnt_data___tmr___width 24 +#define reg_timer_rs_cnt_data___cnt___lsb 24 +#define reg_timer_rs_cnt_data___cnt___width 8 +#define reg_timer_rs_cnt_data_offset 32 + +/* Register r_cnt_data, scope timer, type r */ +#define reg_timer_r_cnt_data___tmr___lsb 0 +#define reg_timer_r_cnt_data___tmr___width 24 +#define reg_timer_r_cnt_data___cnt___lsb 24 +#define reg_timer_r_cnt_data___cnt___width 8 +#define reg_timer_r_cnt_data_offset 36 + +/* Register rw_cnt_cfg, scope timer, type rw */ +#define reg_timer_rw_cnt_cfg___clk___lsb 0 +#define reg_timer_rw_cnt_cfg___clk___width 2 +#define reg_timer_rw_cnt_cfg_offset 40 + +/* Register rw_trig, scope timer, type rw */ +#define reg_timer_rw_trig_offset 48 + +/* Register rw_trig_cfg, scope timer, type rw */ +#define reg_timer_rw_trig_cfg___tmr___lsb 0 +#define reg_timer_rw_trig_cfg___tmr___width 2 +#define reg_timer_rw_trig_cfg_offset 52 + +/* Register r_time, scope timer, type r */ +#define reg_timer_r_time_offset 56 + +/* Register rw_out, scope timer, type rw */ +#define reg_timer_rw_out___tmr___lsb 0 +#define reg_timer_rw_out___tmr___width 2 +#define reg_timer_rw_out_offset 60 + +/* Register rw_wd_ctrl, scope timer, type rw */ +#define reg_timer_rw_wd_ctrl___cnt___lsb 0 +#define reg_timer_rw_wd_ctrl___cnt___width 8 +#define reg_timer_rw_wd_ctrl___cmd___lsb 8 +#define reg_timer_rw_wd_ctrl___cmd___width 1 +#define reg_timer_rw_wd_ctrl___cmd___bit 8 +#define reg_timer_rw_wd_ctrl___key___lsb 9 +#define reg_timer_rw_wd_ctrl___key___width 7 +#define reg_timer_rw_wd_ctrl_offset 64 + +/* Register r_wd_stat, scope timer, type r */ +#define reg_timer_r_wd_stat___cnt___lsb 0 +#define reg_timer_r_wd_stat___cnt___width 8 +#define reg_timer_r_wd_stat___cmd___lsb 8 +#define reg_timer_r_wd_stat___cmd___width 1 +#define reg_timer_r_wd_stat___cmd___bit 8 +#define reg_timer_r_wd_stat_offset 68 + +/* Register rw_intr_mask, scope timer, type rw */ +#define reg_timer_rw_intr_mask___tmr0___lsb 0 +#define reg_timer_rw_intr_mask___tmr0___width 1 +#define reg_timer_rw_intr_mask___tmr0___bit 0 +#define reg_timer_rw_intr_mask___tmr1___lsb 1 +#define reg_timer_rw_intr_mask___tmr1___width 1 +#define reg_timer_rw_intr_mask___tmr1___bit 1 +#define reg_timer_rw_intr_mask___cnt___lsb 2 +#define reg_timer_rw_intr_mask___cnt___width 1 +#define reg_timer_rw_intr_mask___cnt___bit 2 +#define reg_timer_rw_intr_mask___trig___lsb 3 +#define reg_timer_rw_intr_mask___trig___width 1 +#define reg_timer_rw_intr_mask___trig___bit 3 +#define reg_timer_rw_intr_mask_offset 72 + +/* Register rw_ack_intr, scope timer, type rw */ +#define reg_timer_rw_ack_intr___tmr0___lsb 0 +#define reg_timer_rw_ack_intr___tmr0___width 1 +#define reg_timer_rw_ack_intr___tmr0___bit 0 +#define reg_timer_rw_ack_intr___tmr1___lsb 1 +#define reg_timer_rw_ack_intr___tmr1___width 1 +#define reg_timer_rw_ack_intr___tmr1___bit 1 +#define reg_timer_rw_ack_intr___cnt___lsb 2 +#define reg_timer_rw_ack_intr___cnt___width 1 +#define reg_timer_rw_ack_intr___cnt___bit 2 +#define reg_timer_rw_ack_intr___trig___lsb 3 +#define reg_timer_rw_ack_intr___trig___width 1 +#define reg_timer_rw_ack_intr___trig___bit 3 +#define reg_timer_rw_ack_intr_offset 76 + +/* Register r_intr, scope timer, type r */ +#define reg_timer_r_intr___tmr0___lsb 0 +#define reg_timer_r_intr___tmr0___width 1 +#define reg_timer_r_intr___tmr0___bit 0 +#define reg_timer_r_intr___tmr1___lsb 1 +#define reg_timer_r_intr___tmr1___width 1 +#define reg_timer_r_intr___tmr1___bit 1 +#define reg_timer_r_intr___cnt___lsb 2 +#define reg_timer_r_intr___cnt___width 1 +#define reg_timer_r_intr___cnt___bit 2 +#define reg_timer_r_intr___trig___lsb 3 +#define reg_timer_r_intr___trig___width 1 +#define reg_timer_r_intr___trig___bit 3 +#define reg_timer_r_intr_offset 80 + +/* Register r_masked_intr, scope timer, type r */ +#define reg_timer_r_masked_intr___tmr0___lsb 0 +#define reg_timer_r_masked_intr___tmr0___width 1 +#define reg_timer_r_masked_intr___tmr0___bit 0 +#define reg_timer_r_masked_intr___tmr1___lsb 1 +#define reg_timer_r_masked_intr___tmr1___width 1 +#define reg_timer_r_masked_intr___tmr1___bit 1 +#define reg_timer_r_masked_intr___cnt___lsb 2 +#define reg_timer_r_masked_intr___cnt___width 1 +#define reg_timer_r_masked_intr___cnt___bit 2 +#define reg_timer_r_masked_intr___trig___lsb 3 +#define reg_timer_r_masked_intr___trig___width 1 +#define reg_timer_r_masked_intr___trig___bit 3 +#define reg_timer_r_masked_intr_offset 84 + +/* Register rw_test, scope timer, type rw */ +#define reg_timer_rw_test___dis___lsb 0 +#define reg_timer_rw_test___dis___width 1 +#define reg_timer_rw_test___dis___bit 0 +#define reg_timer_rw_test___en___lsb 1 +#define reg_timer_rw_test___en___width 1 +#define reg_timer_rw_test___en___bit 1 +#define reg_timer_rw_test_offset 88 + + +/* Constants */ +#define regk_timer_ext 0x00000001 +#define regk_timer_f100 0x00000007 +#define regk_timer_f29_493 0x00000004 +#define regk_timer_f32 0x00000005 +#define regk_timer_f32_768 0x00000006 +#define regk_timer_hold 0x00000001 +#define regk_timer_ld 0x00000000 +#define regk_timer_no 0x00000000 +#define regk_timer_off 0x00000000 +#define regk_timer_run 0x00000002 +#define regk_timer_rw_cnt_cfg_default 0x00000000 +#define regk_timer_rw_intr_mask_default 0x00000000 +#define regk_timer_rw_out_default 0x00000000 +#define regk_timer_rw_test_default 0x00000000 +#define regk_timer_rw_tmr0_ctrl_default 0x00000000 +#define regk_timer_rw_tmr1_ctrl_default 0x00000000 +#define regk_timer_rw_trig_cfg_default 0x00000000 +#define regk_timer_start 0x00000001 +#define regk_timer_stop 0x00000000 +#define regk_timer_time 0x00000001 +#define regk_timer_tmr0 0x00000002 +#define regk_timer_tmr1 0x00000003 +#define regk_timer_yes 0x00000001 +#endif /* __timer_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/ata_defs.h b/arch/cris/include/arch-v32/arch/hwregs/ata_defs.h new file mode 100644 index 000000000000..43b6643ff0d3 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/ata_defs.h @@ -0,0 +1,222 @@ +#ifndef __ata_defs_h +#define __ata_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/ata/rtl/ata_regs.r + * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp + * last modfied: Mon Apr 11 16:06:25 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile ata_defs.h ../../inst/ata/rtl/ata_regs.r + * id: $Id: ata_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope ata */ + +/* Register rw_ctrl0, scope ata, type rw */ +typedef struct { + unsigned int pio_hold : 6; + unsigned int pio_strb : 6; + unsigned int pio_setup : 6; + unsigned int dma_hold : 6; + unsigned int dma_strb : 6; + unsigned int rst : 1; + unsigned int en : 1; +} reg_ata_rw_ctrl0; +#define REG_RD_ADDR_ata_rw_ctrl0 12 +#define REG_WR_ADDR_ata_rw_ctrl0 12 + +/* Register rw_ctrl1, scope ata, type rw */ +typedef struct { + unsigned int udma_tcyc : 4; + unsigned int udma_tdvs : 4; + unsigned int dummy1 : 24; +} reg_ata_rw_ctrl1; +#define REG_RD_ADDR_ata_rw_ctrl1 16 +#define REG_WR_ADDR_ata_rw_ctrl1 16 + +/* Register rw_ctrl2, scope ata, type rw */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 3; + unsigned int dma_size : 1; + unsigned int multi : 1; + unsigned int hsh : 2; + unsigned int trf_mode : 1; + unsigned int rw : 1; + unsigned int addr : 3; + unsigned int cs0 : 1; + unsigned int cs1 : 1; + unsigned int sel : 2; +} reg_ata_rw_ctrl2; +#define REG_RD_ADDR_ata_rw_ctrl2 0 +#define REG_WR_ADDR_ata_rw_ctrl2 0 + +/* Register rs_stat_data, scope ata, type rs */ +typedef struct { + unsigned int data : 16; + unsigned int dav : 1; + unsigned int busy : 1; + unsigned int dummy1 : 14; +} reg_ata_rs_stat_data; +#define REG_RD_ADDR_ata_rs_stat_data 4 + +/* Register r_stat_data, scope ata, type r */ +typedef struct { + unsigned int data : 16; + unsigned int dav : 1; + unsigned int busy : 1; + unsigned int dummy1 : 14; +} reg_ata_r_stat_data; +#define REG_RD_ADDR_ata_r_stat_data 8 + +/* Register rw_trf_cnt, scope ata, type rw */ +typedef struct { + unsigned int cnt : 17; + unsigned int dummy1 : 15; +} reg_ata_rw_trf_cnt; +#define REG_RD_ADDR_ata_rw_trf_cnt 20 +#define REG_WR_ADDR_ata_rw_trf_cnt 20 + +/* Register r_stat_misc, scope ata, type r */ +typedef struct { + unsigned int crc : 16; + unsigned int dummy1 : 16; +} reg_ata_r_stat_misc; +#define REG_RD_ADDR_ata_r_stat_misc 24 + +/* Register rw_intr_mask, scope ata, type rw */ +typedef struct { + unsigned int bus0 : 1; + unsigned int bus1 : 1; + unsigned int bus2 : 1; + unsigned int bus3 : 1; + unsigned int dummy1 : 28; +} reg_ata_rw_intr_mask; +#define REG_RD_ADDR_ata_rw_intr_mask 28 +#define REG_WR_ADDR_ata_rw_intr_mask 28 + +/* Register rw_ack_intr, scope ata, type rw */ +typedef struct { + unsigned int bus0 : 1; + unsigned int bus1 : 1; + unsigned int bus2 : 1; + unsigned int bus3 : 1; + unsigned int dummy1 : 28; +} reg_ata_rw_ack_intr; +#define REG_RD_ADDR_ata_rw_ack_intr 32 +#define REG_WR_ADDR_ata_rw_ack_intr 32 + +/* Register r_intr, scope ata, type r */ +typedef struct { + unsigned int bus0 : 1; + unsigned int bus1 : 1; + unsigned int bus2 : 1; + unsigned int bus3 : 1; + unsigned int dummy1 : 28; +} reg_ata_r_intr; +#define REG_RD_ADDR_ata_r_intr 36 + +/* Register r_masked_intr, scope ata, type r */ +typedef struct { + unsigned int bus0 : 1; + unsigned int bus1 : 1; + unsigned int bus2 : 1; + unsigned int bus3 : 1; + unsigned int dummy1 : 28; +} reg_ata_r_masked_intr; +#define REG_RD_ADDR_ata_r_masked_intr 40 + + +/* Constants */ +enum { + regk_ata_active = 0x00000001, + regk_ata_byte = 0x00000001, + regk_ata_data = 0x00000001, + regk_ata_dma = 0x00000001, + regk_ata_inactive = 0x00000000, + regk_ata_no = 0x00000000, + regk_ata_nodata = 0x00000000, + regk_ata_pio = 0x00000000, + regk_ata_rd = 0x00000001, + regk_ata_reg = 0x00000000, + regk_ata_rw_ctrl0_default = 0x00000000, + regk_ata_rw_ctrl2_default = 0x00000000, + regk_ata_rw_intr_mask_default = 0x00000000, + regk_ata_udma = 0x00000002, + regk_ata_word = 0x00000000, + regk_ata_wr = 0x00000000, + regk_ata_yes = 0x00000001 +}; +#endif /* __ata_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/bif_core_defs.h b/arch/cris/include/arch-v32/arch/hwregs/bif_core_defs.h new file mode 100644 index 000000000000..a56608b50359 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/bif_core_defs.h @@ -0,0 +1,284 @@ +#ifndef __bif_core_defs_h +#define __bif_core_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_core_regs.r + * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp + * last modfied: Mon Apr 11 16:06:33 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_core_defs.h ../../inst/bif/rtl/bif_core_regs.r + * id: $Id: bif_core_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope bif_core */ + +/* Register rw_grp1_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 10; +} reg_bif_core_rw_grp1_cfg; +#define REG_RD_ADDR_bif_core_rw_grp1_cfg 0 +#define REG_WR_ADDR_bif_core_rw_grp1_cfg 0 + +/* Register rw_grp2_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 10; +} reg_bif_core_rw_grp2_cfg; +#define REG_RD_ADDR_bif_core_rw_grp2_cfg 4 +#define REG_WR_ADDR_bif_core_rw_grp2_cfg 4 + +/* Register rw_grp3_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 2; + unsigned int gated_csp0 : 2; + unsigned int gated_csp1 : 2; + unsigned int gated_csp2 : 2; + unsigned int gated_csp3 : 2; +} reg_bif_core_rw_grp3_cfg; +#define REG_RD_ADDR_bif_core_rw_grp3_cfg 8 +#define REG_WR_ADDR_bif_core_rw_grp3_cfg 8 + +/* Register rw_grp4_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 4; + unsigned int gated_csp4 : 2; + unsigned int gated_csp5 : 2; + unsigned int gated_csp6 : 2; +} reg_bif_core_rw_grp4_cfg; +#define REG_RD_ADDR_bif_core_rw_grp4_cfg 12 +#define REG_WR_ADDR_bif_core_rw_grp4_cfg 12 + +/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */ +typedef struct { + unsigned int bank_sel : 5; + unsigned int ca : 3; + unsigned int type : 1; + unsigned int bw : 1; + unsigned int sh : 3; + unsigned int wmm : 1; + unsigned int sh16 : 1; + unsigned int grp_sel : 5; + unsigned int dummy1 : 12; +} reg_bif_core_rw_sdram_cfg_grp0; +#define REG_RD_ADDR_bif_core_rw_sdram_cfg_grp0 16 +#define REG_WR_ADDR_bif_core_rw_sdram_cfg_grp0 16 + +/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */ +typedef struct { + unsigned int bank_sel : 5; + unsigned int ca : 3; + unsigned int type : 1; + unsigned int bw : 1; + unsigned int sh : 3; + unsigned int wmm : 1; + unsigned int sh16 : 1; + unsigned int dummy1 : 17; +} reg_bif_core_rw_sdram_cfg_grp1; +#define REG_RD_ADDR_bif_core_rw_sdram_cfg_grp1 20 +#define REG_WR_ADDR_bif_core_rw_sdram_cfg_grp1 20 + +/* Register rw_sdram_timing, scope bif_core, type rw */ +typedef struct { + unsigned int cl : 3; + unsigned int rcd : 3; + unsigned int rp : 3; + unsigned int rc : 2; + unsigned int dpl : 2; + unsigned int pde : 1; + unsigned int ref : 2; + unsigned int cpd : 1; + unsigned int sdcke : 1; + unsigned int sdclk : 1; + unsigned int dummy1 : 13; +} reg_bif_core_rw_sdram_timing; +#define REG_RD_ADDR_bif_core_rw_sdram_timing 24 +#define REG_WR_ADDR_bif_core_rw_sdram_timing 24 + +/* Register rw_sdram_cmd, scope bif_core, type rw */ +typedef struct { + unsigned int cmd : 3; + unsigned int mrs_data : 15; + unsigned int dummy1 : 14; +} reg_bif_core_rw_sdram_cmd; +#define REG_RD_ADDR_bif_core_rw_sdram_cmd 28 +#define REG_WR_ADDR_bif_core_rw_sdram_cmd 28 + +/* Register rs_sdram_ref_stat, scope bif_core, type rs */ +typedef struct { + unsigned int ok : 1; + unsigned int dummy1 : 31; +} reg_bif_core_rs_sdram_ref_stat; +#define REG_RD_ADDR_bif_core_rs_sdram_ref_stat 32 + +/* Register r_sdram_ref_stat, scope bif_core, type r */ +typedef struct { + unsigned int ok : 1; + unsigned int dummy1 : 31; +} reg_bif_core_r_sdram_ref_stat; +#define REG_RD_ADDR_bif_core_r_sdram_ref_stat 36 + + +/* Constants */ +enum { + regk_bif_core_bank2 = 0x00000000, + regk_bif_core_bank4 = 0x00000001, + regk_bif_core_bit10 = 0x0000000a, + regk_bif_core_bit11 = 0x0000000b, + regk_bif_core_bit12 = 0x0000000c, + regk_bif_core_bit13 = 0x0000000d, + regk_bif_core_bit14 = 0x0000000e, + regk_bif_core_bit15 = 0x0000000f, + regk_bif_core_bit16 = 0x00000010, + regk_bif_core_bit17 = 0x00000011, + regk_bif_core_bit18 = 0x00000012, + regk_bif_core_bit19 = 0x00000013, + regk_bif_core_bit20 = 0x00000014, + regk_bif_core_bit21 = 0x00000015, + regk_bif_core_bit22 = 0x00000016, + regk_bif_core_bit23 = 0x00000017, + regk_bif_core_bit24 = 0x00000018, + regk_bif_core_bit25 = 0x00000019, + regk_bif_core_bit26 = 0x0000001a, + regk_bif_core_bit27 = 0x0000001b, + regk_bif_core_bit28 = 0x0000001c, + regk_bif_core_bit29 = 0x0000001d, + regk_bif_core_bit9 = 0x00000009, + regk_bif_core_bw16 = 0x00000001, + regk_bif_core_bw32 = 0x00000000, + regk_bif_core_bwe = 0x00000000, + regk_bif_core_cwe = 0x00000001, + regk_bif_core_e15us = 0x00000001, + regk_bif_core_e7800ns = 0x00000002, + regk_bif_core_grp0 = 0x00000000, + regk_bif_core_grp1 = 0x00000001, + regk_bif_core_mrs = 0x00000003, + regk_bif_core_no = 0x00000000, + regk_bif_core_none = 0x00000000, + regk_bif_core_nop = 0x00000000, + regk_bif_core_off = 0x00000000, + regk_bif_core_pre = 0x00000002, + regk_bif_core_r_sdram_ref_stat_default = 0x00000001, + regk_bif_core_rd = 0x00000002, + regk_bif_core_ref = 0x00000001, + regk_bif_core_rs_sdram_ref_stat_default = 0x00000001, + regk_bif_core_rw_grp1_cfg_default = 0x000006cf, + regk_bif_core_rw_grp2_cfg_default = 0x000006cf, + regk_bif_core_rw_grp3_cfg_default = 0x000006cf, + regk_bif_core_rw_grp4_cfg_default = 0x000006cf, + regk_bif_core_rw_sdram_cfg_grp1_default = 0x00000000, + regk_bif_core_slf = 0x00000004, + regk_bif_core_wr = 0x00000001, + regk_bif_core_yes = 0x00000001 +}; +#endif /* __bif_core_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/bif_dma_defs.h b/arch/cris/include/arch-v32/arch/hwregs/bif_dma_defs.h new file mode 100644 index 000000000000..b931c1aab679 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/bif_dma_defs.h @@ -0,0 +1,473 @@ +#ifndef __bif_dma_defs_h +#define __bif_dma_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_dma_regs.r + * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp + * last modfied: Mon Apr 11 16:06:33 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_dma_defs.h ../../inst/bif/rtl/bif_dma_regs.r + * id: $Id: bif_dma_defs.h,v 1.2 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope bif_dma */ + +/* Register rw_ch0_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_pad : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int wr_all : 1; + unsigned int dummy1 : 12; +} reg_bif_dma_rw_ch0_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch0_ctrl 0 +#define REG_WR_ADDR_bif_dma_rw_ch0_ctrl 0 + +/* Register rw_ch0_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch0_addr; +#define REG_RD_ADDR_bif_dma_rw_ch0_addr 4 +#define REG_WR_ADDR_bif_dma_rw_ch0_addr 4 + +/* Register rw_ch0_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch0_start; +#define REG_RD_ADDR_bif_dma_rw_ch0_start 8 +#define REG_WR_ADDR_bif_dma_rw_ch0_start 8 + +/* Register rw_ch0_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch0_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch0_cnt 12 +#define REG_WR_ADDR_bif_dma_rw_ch0_cnt 12 + +/* Register r_ch0_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch0_stat; +#define REG_RD_ADDR_bif_dma_r_ch0_stat 16 + +/* Register rw_ch1_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_discard : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int dummy1 : 13; +} reg_bif_dma_rw_ch1_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch1_ctrl 32 +#define REG_WR_ADDR_bif_dma_rw_ch1_ctrl 32 + +/* Register rw_ch1_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch1_addr; +#define REG_RD_ADDR_bif_dma_rw_ch1_addr 36 +#define REG_WR_ADDR_bif_dma_rw_ch1_addr 36 + +/* Register rw_ch1_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch1_start; +#define REG_RD_ADDR_bif_dma_rw_ch1_start 40 +#define REG_WR_ADDR_bif_dma_rw_ch1_start 40 + +/* Register rw_ch1_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch1_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch1_cnt 44 +#define REG_WR_ADDR_bif_dma_rw_ch1_cnt 44 + +/* Register r_ch1_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch1_stat; +#define REG_RD_ADDR_bif_dma_r_ch1_stat 48 + +/* Register rw_ch2_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_pad : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int wr_all : 1; + unsigned int dummy1 : 12; +} reg_bif_dma_rw_ch2_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch2_ctrl 64 +#define REG_WR_ADDR_bif_dma_rw_ch2_ctrl 64 + +/* Register rw_ch2_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch2_addr; +#define REG_RD_ADDR_bif_dma_rw_ch2_addr 68 +#define REG_WR_ADDR_bif_dma_rw_ch2_addr 68 + +/* Register rw_ch2_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch2_start; +#define REG_RD_ADDR_bif_dma_rw_ch2_start 72 +#define REG_WR_ADDR_bif_dma_rw_ch2_start 72 + +/* Register rw_ch2_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch2_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch2_cnt 76 +#define REG_WR_ADDR_bif_dma_rw_ch2_cnt 76 + +/* Register r_ch2_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch2_stat; +#define REG_RD_ADDR_bif_dma_r_ch2_stat 80 + +/* Register rw_ch3_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_discard : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int dummy1 : 13; +} reg_bif_dma_rw_ch3_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch3_ctrl 96 +#define REG_WR_ADDR_bif_dma_rw_ch3_ctrl 96 + +/* Register rw_ch3_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch3_addr; +#define REG_RD_ADDR_bif_dma_rw_ch3_addr 100 +#define REG_WR_ADDR_bif_dma_rw_ch3_addr 100 + +/* Register rw_ch3_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch3_start; +#define REG_RD_ADDR_bif_dma_rw_ch3_start 104 +#define REG_WR_ADDR_bif_dma_rw_ch3_start 104 + +/* Register rw_ch3_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch3_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch3_cnt 108 +#define REG_WR_ADDR_bif_dma_rw_ch3_cnt 108 + +/* Register r_ch3_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch3_stat; +#define REG_RD_ADDR_bif_dma_r_ch3_stat 112 + +/* Register rw_intr_mask, scope bif_dma, type rw */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_rw_intr_mask; +#define REG_RD_ADDR_bif_dma_rw_intr_mask 128 +#define REG_WR_ADDR_bif_dma_rw_intr_mask 128 + +/* Register rw_ack_intr, scope bif_dma, type rw */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_rw_ack_intr; +#define REG_RD_ADDR_bif_dma_rw_ack_intr 132 +#define REG_WR_ADDR_bif_dma_rw_ack_intr 132 + +/* Register r_intr, scope bif_dma, type r */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_r_intr; +#define REG_RD_ADDR_bif_dma_r_intr 136 + +/* Register r_masked_intr, scope bif_dma, type r */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_r_masked_intr; +#define REG_RD_ADDR_bif_dma_r_masked_intr 140 + +/* Register rw_pin0_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin0_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin0_cfg 160 +#define REG_WR_ADDR_bif_dma_rw_pin0_cfg 160 + +/* Register rw_pin1_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin1_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin1_cfg 164 +#define REG_WR_ADDR_bif_dma_rw_pin1_cfg 164 + +/* Register rw_pin2_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin2_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin2_cfg 168 +#define REG_WR_ADDR_bif_dma_rw_pin2_cfg 168 + +/* Register rw_pin3_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin3_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin3_cfg 172 +#define REG_WR_ADDR_bif_dma_rw_pin3_cfg 172 + +/* Register rw_pin4_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin4_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin4_cfg 176 +#define REG_WR_ADDR_bif_dma_rw_pin4_cfg 176 + +/* Register rw_pin5_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin5_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin5_cfg 180 +#define REG_WR_ADDR_bif_dma_rw_pin5_cfg 180 + +/* Register rw_pin6_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin6_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin6_cfg 184 +#define REG_WR_ADDR_bif_dma_rw_pin6_cfg 184 + +/* Register rw_pin7_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin7_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin7_cfg 188 +#define REG_WR_ADDR_bif_dma_rw_pin7_cfg 188 + +/* Register r_pin_stat, scope bif_dma, type r */ +typedef struct { + unsigned int pin0 : 1; + unsigned int pin1 : 1; + unsigned int pin2 : 1; + unsigned int pin3 : 1; + unsigned int pin4 : 1; + unsigned int pin5 : 1; + unsigned int pin6 : 1; + unsigned int pin7 : 1; + unsigned int dummy1 : 24; +} reg_bif_dma_r_pin_stat; +#define REG_RD_ADDR_bif_dma_r_pin_stat 192 + + +/* Constants */ +enum { + regk_bif_dma_as_master = 0x00000001, + regk_bif_dma_as_slave = 0x00000001, + regk_bif_dma_burst1 = 0x00000000, + regk_bif_dma_burst8 = 0x00000001, + regk_bif_dma_bw16 = 0x00000001, + regk_bif_dma_bw32 = 0x00000002, + regk_bif_dma_bw8 = 0x00000000, + regk_bif_dma_dack = 0x00000006, + regk_bif_dma_dack_inv = 0x00000007, + regk_bif_dma_force = 0x00000001, + regk_bif_dma_hi = 0x00000003, + regk_bif_dma_inv = 0x00000003, + regk_bif_dma_lo = 0x00000002, + regk_bif_dma_master = 0x00000001, + regk_bif_dma_no = 0x00000000, + regk_bif_dma_norm = 0x00000002, + regk_bif_dma_off = 0x00000000, + regk_bif_dma_rw_ch0_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch0_start_default = 0x00000000, + regk_bif_dma_rw_ch1_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch1_start_default = 0x00000000, + regk_bif_dma_rw_ch2_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch2_start_default = 0x00000000, + regk_bif_dma_rw_ch3_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch3_start_default = 0x00000000, + regk_bif_dma_rw_intr_mask_default = 0x00000000, + regk_bif_dma_rw_pin0_cfg_default = 0x00000000, + regk_bif_dma_rw_pin1_cfg_default = 0x00000000, + regk_bif_dma_rw_pin2_cfg_default = 0x00000000, + regk_bif_dma_rw_pin3_cfg_default = 0x00000000, + regk_bif_dma_rw_pin4_cfg_default = 0x00000000, + regk_bif_dma_rw_pin5_cfg_default = 0x00000000, + regk_bif_dma_rw_pin6_cfg_default = 0x00000000, + regk_bif_dma_rw_pin7_cfg_default = 0x00000000, + regk_bif_dma_slave = 0x00000002, + regk_bif_dma_sreq = 0x00000006, + regk_bif_dma_sreq_inv = 0x00000007, + regk_bif_dma_tc = 0x00000004, + regk_bif_dma_tc_inv = 0x00000005, + regk_bif_dma_yes = 0x00000001 +}; +#endif /* __bif_dma_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/bif_slave_defs.h b/arch/cris/include/arch-v32/arch/hwregs/bif_slave_defs.h new file mode 100644 index 000000000000..d18fc3c9f569 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/bif_slave_defs.h @@ -0,0 +1,249 @@ +#ifndef __bif_slave_defs_h +#define __bif_slave_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_slave_regs.r + * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp + * last modfied: Mon Apr 11 16:06:34 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_slave_defs.h ../../inst/bif/rtl/bif_slave_regs.r + * id: $Id: bif_slave_defs.h,v 1.2 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope bif_slave */ + +/* Register rw_slave_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int slave_id : 3; + unsigned int use_slave_id : 1; + unsigned int boot_rdy : 1; + unsigned int loopback : 1; + unsigned int dis : 1; + unsigned int dummy1 : 25; +} reg_bif_slave_rw_slave_cfg; +#define REG_RD_ADDR_bif_slave_rw_slave_cfg 0 +#define REG_WR_ADDR_bif_slave_rw_slave_cfg 0 + +/* Register r_slave_mode, scope bif_slave, type r */ +typedef struct { + unsigned int ch0_mode : 1; + unsigned int ch1_mode : 1; + unsigned int ch2_mode : 1; + unsigned int ch3_mode : 1; + unsigned int dummy1 : 28; +} reg_bif_slave_r_slave_mode; +#define REG_RD_ADDR_bif_slave_r_slave_mode 4 + +/* Register rw_ch0_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch0_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch0_cfg 16 +#define REG_WR_ADDR_bif_slave_rw_ch0_cfg 16 + +/* Register rw_ch1_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch1_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch1_cfg 20 +#define REG_WR_ADDR_bif_slave_rw_ch1_cfg 20 + +/* Register rw_ch2_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch2_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch2_cfg 24 +#define REG_WR_ADDR_bif_slave_rw_ch2_cfg 24 + +/* Register rw_ch3_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch3_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch3_cfg 28 +#define REG_WR_ADDR_bif_slave_rw_ch3_cfg 28 + +/* Register rw_arb_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int brin_mode : 1; + unsigned int brout_mode : 3; + unsigned int bg_mode : 3; + unsigned int release : 2; + unsigned int acquire : 1; + unsigned int settle_time : 2; + unsigned int dram_ctrl : 1; + unsigned int dummy1 : 19; +} reg_bif_slave_rw_arb_cfg; +#define REG_RD_ADDR_bif_slave_rw_arb_cfg 32 +#define REG_WR_ADDR_bif_slave_rw_arb_cfg 32 + +/* Register r_arb_stat, scope bif_slave, type r */ +typedef struct { + unsigned int init_mode : 1; + unsigned int mode : 1; + unsigned int brin : 1; + unsigned int brout : 1; + unsigned int bg : 1; + unsigned int dummy1 : 27; +} reg_bif_slave_r_arb_stat; +#define REG_RD_ADDR_bif_slave_r_arb_stat 36 + +/* Register rw_intr_mask, scope bif_slave, type rw */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_rw_intr_mask; +#define REG_RD_ADDR_bif_slave_rw_intr_mask 64 +#define REG_WR_ADDR_bif_slave_rw_intr_mask 64 + +/* Register rw_ack_intr, scope bif_slave, type rw */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_rw_ack_intr; +#define REG_RD_ADDR_bif_slave_rw_ack_intr 68 +#define REG_WR_ADDR_bif_slave_rw_ack_intr 68 + +/* Register r_intr, scope bif_slave, type r */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_r_intr; +#define REG_RD_ADDR_bif_slave_r_intr 72 + +/* Register r_masked_intr, scope bif_slave, type r */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_r_masked_intr; +#define REG_RD_ADDR_bif_slave_r_masked_intr 76 + + +/* Constants */ +enum { + regk_bif_slave_active_hi = 0x00000003, + regk_bif_slave_active_lo = 0x00000002, + regk_bif_slave_addr = 0x00000000, + regk_bif_slave_always = 0x00000001, + regk_bif_slave_at_idle = 0x00000002, + regk_bif_slave_burst_end = 0x00000003, + regk_bif_slave_dma = 0x00000001, + regk_bif_slave_hi = 0x00000003, + regk_bif_slave_inv = 0x00000001, + regk_bif_slave_lo = 0x00000002, + regk_bif_slave_local = 0x00000001, + regk_bif_slave_master = 0x00000000, + regk_bif_slave_mode_reg = 0x00000001, + regk_bif_slave_no = 0x00000000, + regk_bif_slave_norm = 0x00000000, + regk_bif_slave_on_access = 0x00000000, + regk_bif_slave_rw_arb_cfg_default = 0x00000000, + regk_bif_slave_rw_ch0_cfg_default = 0x00000000, + regk_bif_slave_rw_ch1_cfg_default = 0x00000000, + regk_bif_slave_rw_ch2_cfg_default = 0x00000000, + regk_bif_slave_rw_ch3_cfg_default = 0x00000000, + regk_bif_slave_rw_intr_mask_default = 0x00000000, + regk_bif_slave_rw_slave_cfg_default = 0x00000000, + regk_bif_slave_shared = 0x00000000, + regk_bif_slave_slave = 0x00000001, + regk_bif_slave_t0ns = 0x00000003, + regk_bif_slave_t10ns = 0x00000002, + regk_bif_slave_t20ns = 0x00000003, + regk_bif_slave_t30ns = 0x00000002, + regk_bif_slave_t40ns = 0x00000001, + regk_bif_slave_t50ns = 0x00000000, + regk_bif_slave_yes = 0x00000001, + regk_bif_slave_z = 0x00000004 +}; +#endif /* __bif_slave_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/config_defs.h b/arch/cris/include/arch-v32/arch/hwregs/config_defs.h new file mode 100644 index 000000000000..45457a4e3817 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/config_defs.h @@ -0,0 +1,142 @@ +#ifndef __config_defs_h +#define __config_defs_h + +/* + * This file is autogenerated from + * file: ../../rtl/config_regs.r + * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp + * last modfied: Thu Mar 4 12:34:39 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile config_defs.h ../../rtl/config_regs.r + * id: $Id: config_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope config */ + +/* Register r_bootsel, scope config, type r */ +typedef struct { + unsigned int boot_mode : 3; + unsigned int full_duplex : 1; + unsigned int user : 1; + unsigned int pll : 1; + unsigned int flash_bw : 1; + unsigned int dummy1 : 25; +} reg_config_r_bootsel; +#define REG_RD_ADDR_config_r_bootsel 0 + +/* Register rw_clk_ctrl, scope config, type rw */ +typedef struct { + unsigned int pll : 1; + unsigned int cpu : 1; + unsigned int iop : 1; + unsigned int dma01_eth0 : 1; + unsigned int dma23 : 1; + unsigned int dma45 : 1; + unsigned int dma67 : 1; + unsigned int dma89_strcop : 1; + unsigned int bif : 1; + unsigned int fix_io : 1; + unsigned int dummy1 : 22; +} reg_config_rw_clk_ctrl; +#define REG_RD_ADDR_config_rw_clk_ctrl 4 +#define REG_WR_ADDR_config_rw_clk_ctrl 4 + +/* Register rw_pad_ctrl, scope config, type rw */ +typedef struct { + unsigned int usb_susp : 1; + unsigned int phyrst_n : 1; + unsigned int dummy1 : 30; +} reg_config_rw_pad_ctrl; +#define REG_RD_ADDR_config_rw_pad_ctrl 8 +#define REG_WR_ADDR_config_rw_pad_ctrl 8 + + +/* Constants */ +enum { + regk_config_bw16 = 0x00000000, + regk_config_bw32 = 0x00000001, + regk_config_master = 0x00000005, + regk_config_nand = 0x00000003, + regk_config_net_rx = 0x00000001, + regk_config_net_tx_rx = 0x00000002, + regk_config_no = 0x00000000, + regk_config_none = 0x00000007, + regk_config_nor = 0x00000000, + regk_config_rw_clk_ctrl_default = 0x00000002, + regk_config_rw_pad_ctrl_default = 0x00000000, + regk_config_ser = 0x00000004, + regk_config_slave = 0x00000006, + regk_config_yes = 0x00000001 +}; +#endif /* __config_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/cpu_vect.h b/arch/cris/include/arch-v32/arch/hwregs/cpu_vect.h new file mode 100644 index 000000000000..8370aee8a14a --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/cpu_vect.h @@ -0,0 +1,41 @@ +/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version + from ../../inst/crisp/doc/cpu_vect.r +version . */ + +#ifndef _______INST_CRISP_DOC_CPU_VECT_R +#define _______INST_CRISP_DOC_CPU_VECT_R +#define NMI_INTR_VECT 0x00 +#define RESERVED_1_INTR_VECT 0x01 +#define RESERVED_2_INTR_VECT 0x02 +#define SINGLE_STEP_INTR_VECT 0x03 +#define INSTR_TLB_REFILL_INTR_VECT 0x04 +#define INSTR_TLB_INV_INTR_VECT 0x05 +#define INSTR_TLB_ACC_INTR_VECT 0x06 +#define TLB_EX_INTR_VECT 0x07 +#define DATA_TLB_REFILL_INTR_VECT 0x08 +#define DATA_TLB_INV_INTR_VECT 0x09 +#define DATA_TLB_ACC_INTR_VECT 0x0a +#define DATA_TLB_WE_INTR_VECT 0x0b +#define HW_BP_INTR_VECT 0x0c +#define RESERVED_D_INTR_VECT 0x0d +#define RESERVED_E_INTR_VECT 0x0e +#define RESERVED_F_INTR_VECT 0x0f +#define BREAK_0_INTR_VECT 0x10 +#define BREAK_1_INTR_VECT 0x11 +#define BREAK_2_INTR_VECT 0x12 +#define BREAK_3_INTR_VECT 0x13 +#define BREAK_4_INTR_VECT 0x14 +#define BREAK_5_INTR_VECT 0x15 +#define BREAK_6_INTR_VECT 0x16 +#define BREAK_7_INTR_VECT 0x17 +#define BREAK_8_INTR_VECT 0x18 +#define BREAK_9_INTR_VECT 0x19 +#define BREAK_10_INTR_VECT 0x1a +#define BREAK_11_INTR_VECT 0x1b +#define BREAK_12_INTR_VECT 0x1c +#define BREAK_13_INTR_VECT 0x1d +#define BREAK_14_INTR_VECT 0x1e +#define BREAK_15_INTR_VECT 0x1f +#define MULTIPLE_INTR_VECT 0x30 + +#endif diff --git a/arch/cris/include/arch-v32/arch/hwregs/dma.h b/arch/cris/include/arch-v32/arch/hwregs/dma.h new file mode 100644 index 000000000000..3ce322b5c731 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/dma.h @@ -0,0 +1,127 @@ +/* + * DMA C definitions and help macros + * + */ + +#ifndef dma_h +#define dma_h + +/* registers */ /* Really needed, since both are listed in sw.list? */ +#include "dma_defs.h" + + +/* descriptors */ + +// ------------------------------------------------------------ dma_descr_group +typedef struct dma_descr_group { + struct dma_descr_group *next; + unsigned eol : 1; + unsigned tol : 1; + unsigned bol : 1; + unsigned : 1; + unsigned intr : 1; + unsigned : 2; + unsigned en : 1; + unsigned : 7; + unsigned dis : 1; + unsigned md : 16; + struct dma_descr_group *up; + union { + struct dma_descr_context *context; + struct dma_descr_group *group; + } down; +} dma_descr_group; + +// ---------------------------------------------------------- dma_descr_context +typedef struct dma_descr_context { + struct dma_descr_context *next; + unsigned eol : 1; + unsigned : 3; + unsigned intr : 1; + unsigned : 1; + unsigned store_mode : 1; + unsigned en : 1; + unsigned : 7; + unsigned dis : 1; + unsigned md0 : 16; + unsigned md1; + unsigned md2; + unsigned md3; + unsigned md4; + struct dma_descr_data *saved_data; + char *saved_data_buf; +} dma_descr_context; + +// ------------------------------------------------------------- dma_descr_data +typedef struct dma_descr_data { + struct dma_descr_data *next; + char *buf; + unsigned eol : 1; + unsigned : 2; + unsigned out_eop : 1; + unsigned intr : 1; + unsigned wait : 1; + unsigned : 2; + unsigned : 3; + unsigned in_eop : 1; + unsigned : 4; + unsigned md : 16; + char *after; +} dma_descr_data; + +// --------------------------------------------------------------------- macros + +// enable DMA channel +#define DMA_ENABLE( inst ) \ + do { reg_dma_rw_cfg e = REG_RD( dma, inst, rw_cfg );\ + e.en = regk_dma_yes; \ + REG_WR( dma, inst, rw_cfg, e); } while( 0 ) + +// reset DMA channel +#define DMA_RESET( inst ) \ + do { reg_dma_rw_cfg r = REG_RD( dma, inst, rw_cfg );\ + r.en = regk_dma_no; \ + REG_WR( dma, inst, rw_cfg, r); } while( 0 ) + +// stop DMA channel +#define DMA_STOP( inst ) \ + do { reg_dma_rw_cfg s = REG_RD( dma, inst, rw_cfg );\ + s.stop = regk_dma_yes; \ + REG_WR( dma, inst, rw_cfg, s); } while( 0 ) + +// continue DMA channel operation +#define DMA_CONTINUE( inst ) \ + do { reg_dma_rw_cfg c = REG_RD( dma, inst, rw_cfg );\ + c.stop = regk_dma_no; \ + REG_WR( dma, inst, rw_cfg, c); } while( 0 ) + +// give stream command +#define DMA_WR_CMD( inst, cmd_par ) \ + do { reg_dma_rw_stream_cmd __x = {0}; \ + do { __x = REG_RD(dma, inst, rw_stream_cmd); } while (__x.busy); \ + __x.cmd = (cmd_par); \ + REG_WR(dma, inst, rw_stream_cmd, __x); \ + } while (0) + +// load: g,c,d:burst +#define DMA_START_GROUP( inst, group_descr ) \ + do { REG_WR_INT( dma, inst, rw_group, (int) group_descr ); \ + DMA_WR_CMD( inst, regk_dma_load_g ); \ + DMA_WR_CMD( inst, regk_dma_load_c ); \ + DMA_WR_CMD( inst, regk_dma_load_d | regk_dma_burst ); \ + } while( 0 ) + +// load: c,d:burst +#define DMA_START_CONTEXT( inst, ctx_descr ) \ + do { REG_WR_INT( dma, inst, rw_group_down, (int) ctx_descr ); \ + DMA_WR_CMD( inst, regk_dma_load_c ); \ + DMA_WR_CMD( inst, regk_dma_load_d | regk_dma_burst ); \ + } while( 0 ) + +// if the DMA is at the end of the data list, the last data descr is reloaded +#define DMA_CONTINUE_DATA( inst ) \ +do { reg_dma_rw_cmd c = {0}; \ + c.cont_data = regk_dma_yes;\ + REG_WR( dma, inst, rw_cmd, c ); } while( 0 ) + +#endif diff --git a/arch/cris/include/arch-v32/arch/hwregs/dma_defs.h b/arch/cris/include/arch-v32/arch/hwregs/dma_defs.h new file mode 100644 index 000000000000..48ac8cef7ebe --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/dma_defs.h @@ -0,0 +1,436 @@ +#ifndef __dma_defs_h +#define __dma_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/dma/inst/dma_common/rtl/dma_regdes.r + * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp + * last modfied: Mon Apr 11 16:06:51 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile dma_defs.h ../../inst/dma/inst/dma_common/rtl/dma_regdes.r + * id: $Id: dma_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope dma */ + +/* Register rw_data, scope dma, type rw */ +typedef unsigned int reg_dma_rw_data; +#define REG_RD_ADDR_dma_rw_data 0 +#define REG_WR_ADDR_dma_rw_data 0 + +/* Register rw_data_next, scope dma, type rw */ +typedef unsigned int reg_dma_rw_data_next; +#define REG_RD_ADDR_dma_rw_data_next 4 +#define REG_WR_ADDR_dma_rw_data_next 4 + +/* Register rw_data_buf, scope dma, type rw */ +typedef unsigned int reg_dma_rw_data_buf; +#define REG_RD_ADDR_dma_rw_data_buf 8 +#define REG_WR_ADDR_dma_rw_data_buf 8 + +/* Register rw_data_ctrl, scope dma, type rw */ +typedef struct { + unsigned int eol : 1; + unsigned int dummy1 : 2; + unsigned int out_eop : 1; + unsigned int intr : 1; + unsigned int wait : 1; + unsigned int dummy2 : 26; +} reg_dma_rw_data_ctrl; +#define REG_RD_ADDR_dma_rw_data_ctrl 12 +#define REG_WR_ADDR_dma_rw_data_ctrl 12 + +/* Register rw_data_stat, scope dma, type rw */ +typedef struct { + unsigned int dummy1 : 3; + unsigned int in_eop : 1; + unsigned int dummy2 : 28; +} reg_dma_rw_data_stat; +#define REG_RD_ADDR_dma_rw_data_stat 16 +#define REG_WR_ADDR_dma_rw_data_stat 16 + +/* Register rw_data_md, scope dma, type rw */ +typedef struct { + unsigned int md : 16; + unsigned int dummy1 : 16; +} reg_dma_rw_data_md; +#define REG_RD_ADDR_dma_rw_data_md 20 +#define REG_WR_ADDR_dma_rw_data_md 20 + +/* Register rw_data_md_s, scope dma, type rw */ +typedef struct { + unsigned int md_s : 16; + unsigned int dummy1 : 16; +} reg_dma_rw_data_md_s; +#define REG_RD_ADDR_dma_rw_data_md_s 24 +#define REG_WR_ADDR_dma_rw_data_md_s 24 + +/* Register rw_data_after, scope dma, type rw */ +typedef unsigned int reg_dma_rw_data_after; +#define REG_RD_ADDR_dma_rw_data_after 28 +#define REG_WR_ADDR_dma_rw_data_after 28 + +/* Register rw_ctxt, scope dma, type rw */ +typedef unsigned int reg_dma_rw_ctxt; +#define REG_RD_ADDR_dma_rw_ctxt 32 +#define REG_WR_ADDR_dma_rw_ctxt 32 + +/* Register rw_ctxt_next, scope dma, type rw */ +typedef unsigned int reg_dma_rw_ctxt_next; +#define REG_RD_ADDR_dma_rw_ctxt_next 36 +#define REG_WR_ADDR_dma_rw_ctxt_next 36 + +/* Register rw_ctxt_ctrl, scope dma, type rw */ +typedef struct { + unsigned int eol : 1; + unsigned int dummy1 : 3; + unsigned int intr : 1; + unsigned int dummy2 : 1; + unsigned int store_mode : 1; + unsigned int en : 1; + unsigned int dummy3 : 24; +} reg_dma_rw_ctxt_ctrl; +#define REG_RD_ADDR_dma_rw_ctxt_ctrl 40 +#define REG_WR_ADDR_dma_rw_ctxt_ctrl 40 + +/* Register rw_ctxt_stat, scope dma, type rw */ +typedef struct { + unsigned int dummy1 : 7; + unsigned int dis : 1; + unsigned int dummy2 : 24; +} reg_dma_rw_ctxt_stat; +#define REG_RD_ADDR_dma_rw_ctxt_stat 44 +#define REG_WR_ADDR_dma_rw_ctxt_stat 44 + +/* Register rw_ctxt_md0, scope dma, type rw */ +typedef struct { + unsigned int md0 : 16; + unsigned int dummy1 : 16; +} reg_dma_rw_ctxt_md0; +#define REG_RD_ADDR_dma_rw_ctxt_md0 48 +#define REG_WR_ADDR_dma_rw_ctxt_md0 48 + +/* Register rw_ctxt_md0_s, scope dma, type rw */ +typedef struct { + unsigned int md0_s : 16; + unsigned int dummy1 : 16; +} reg_dma_rw_ctxt_md0_s; +#define REG_RD_ADDR_dma_rw_ctxt_md0_s 52 +#define REG_WR_ADDR_dma_rw_ctxt_md0_s 52 + +/* Register rw_ctxt_md1, scope dma, type rw */ +typedef unsigned int reg_dma_rw_ctxt_md1; +#define REG_RD_ADDR_dma_rw_ctxt_md1 56 +#define REG_WR_ADDR_dma_rw_ctxt_md1 56 + +/* Register rw_ctxt_md1_s, scope dma, type rw */ +typedef unsigned int reg_dma_rw_ctxt_md1_s; +#define REG_RD_ADDR_dma_rw_ctxt_md1_s 60 +#define REG_WR_ADDR_dma_rw_ctxt_md1_s 60 + +/* Register rw_ctxt_md2, scope dma, type rw */ +typedef unsigned int reg_dma_rw_ctxt_md2; +#define REG_RD_ADDR_dma_rw_ctxt_md2 64 +#define REG_WR_ADDR_dma_rw_ctxt_md2 64 + +/* Register rw_ctxt_md2_s, scope dma, type rw */ +typedef unsigned int reg_dma_rw_ctxt_md2_s; +#define REG_RD_ADDR_dma_rw_ctxt_md2_s 68 +#define REG_WR_ADDR_dma_rw_ctxt_md2_s 68 + +/* Register rw_ctxt_md3, scope dma, type rw */ +typedef unsigned int reg_dma_rw_ctxt_md3; +#define REG_RD_ADDR_dma_rw_ctxt_md3 72 +#define REG_WR_ADDR_dma_rw_ctxt_md3 72 + +/* Register rw_ctxt_md3_s, scope dma, type rw */ +typedef unsigned int reg_dma_rw_ctxt_md3_s; +#define REG_RD_ADDR_dma_rw_ctxt_md3_s 76 +#define REG_WR_ADDR_dma_rw_ctxt_md3_s 76 + +/* Register rw_ctxt_md4, scope dma, type rw */ +typedef unsigned int reg_dma_rw_ctxt_md4; +#define REG_RD_ADDR_dma_rw_ctxt_md4 80 +#define REG_WR_ADDR_dma_rw_ctxt_md4 80 + +/* Register rw_ctxt_md4_s, scope dma, type rw */ +typedef unsigned int reg_dma_rw_ctxt_md4_s; +#define REG_RD_ADDR_dma_rw_ctxt_md4_s 84 +#define REG_WR_ADDR_dma_rw_ctxt_md4_s 84 + +/* Register rw_saved_data, scope dma, type rw */ +typedef unsigned int reg_dma_rw_saved_data; +#define REG_RD_ADDR_dma_rw_saved_data 88 +#define REG_WR_ADDR_dma_rw_saved_data 88 + +/* Register rw_saved_data_buf, scope dma, type rw */ +typedef unsigned int reg_dma_rw_saved_data_buf; +#define REG_RD_ADDR_dma_rw_saved_data_buf 92 +#define REG_WR_ADDR_dma_rw_saved_data_buf 92 + +/* Register rw_group, scope dma, type rw */ +typedef unsigned int reg_dma_rw_group; +#define REG_RD_ADDR_dma_rw_group 96 +#define REG_WR_ADDR_dma_rw_group 96 + +/* Register rw_group_next, scope dma, type rw */ +typedef unsigned int reg_dma_rw_group_next; +#define REG_RD_ADDR_dma_rw_group_next 100 +#define REG_WR_ADDR_dma_rw_group_next 100 + +/* Register rw_group_ctrl, scope dma, type rw */ +typedef struct { + unsigned int eol : 1; + unsigned int tol : 1; + unsigned int bol : 1; + unsigned int dummy1 : 1; + unsigned int intr : 1; + unsigned int dummy2 : 2; + unsigned int en : 1; + unsigned int dummy3 : 24; +} reg_dma_rw_group_ctrl; +#define REG_RD_ADDR_dma_rw_group_ctrl 104 +#define REG_WR_ADDR_dma_rw_group_ctrl 104 + +/* Register rw_group_stat, scope dma, type rw */ +typedef struct { + unsigned int dummy1 : 7; + unsigned int dis : 1; + unsigned int dummy2 : 24; +} reg_dma_rw_group_stat; +#define REG_RD_ADDR_dma_rw_group_stat 108 +#define REG_WR_ADDR_dma_rw_group_stat 108 + +/* Register rw_group_md, scope dma, type rw */ +typedef struct { + unsigned int md : 16; + unsigned int dummy1 : 16; +} reg_dma_rw_group_md; +#define REG_RD_ADDR_dma_rw_group_md 112 +#define REG_WR_ADDR_dma_rw_group_md 112 + +/* Register rw_group_md_s, scope dma, type rw */ +typedef struct { + unsigned int md_s : 16; + unsigned int dummy1 : 16; +} reg_dma_rw_group_md_s; +#define REG_RD_ADDR_dma_rw_group_md_s 116 +#define REG_WR_ADDR_dma_rw_group_md_s 116 + +/* Register rw_group_up, scope dma, type rw */ +typedef unsigned int reg_dma_rw_group_up; +#define REG_RD_ADDR_dma_rw_group_up 120 +#define REG_WR_ADDR_dma_rw_group_up 120 + +/* Register rw_group_down, scope dma, type rw */ +typedef unsigned int reg_dma_rw_group_down; +#define REG_RD_ADDR_dma_rw_group_down 124 +#define REG_WR_ADDR_dma_rw_group_down 124 + +/* Register rw_cmd, scope dma, type rw */ +typedef struct { + unsigned int cont_data : 1; + unsigned int dummy1 : 31; +} reg_dma_rw_cmd; +#define REG_RD_ADDR_dma_rw_cmd 128 +#define REG_WR_ADDR_dma_rw_cmd 128 + +/* Register rw_cfg, scope dma, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int stop : 1; + unsigned int dummy1 : 30; +} reg_dma_rw_cfg; +#define REG_RD_ADDR_dma_rw_cfg 132 +#define REG_WR_ADDR_dma_rw_cfg 132 + +/* Register rw_stat, scope dma, type rw */ +typedef struct { + unsigned int mode : 5; + unsigned int list_state : 3; + unsigned int stream_cmd_src : 8; + unsigned int dummy1 : 8; + unsigned int buf : 8; +} reg_dma_rw_stat; +#define REG_RD_ADDR_dma_rw_stat 136 +#define REG_WR_ADDR_dma_rw_stat 136 + +/* Register rw_intr_mask, scope dma, type rw */ +typedef struct { + unsigned int group : 1; + unsigned int ctxt : 1; + unsigned int data : 1; + unsigned int in_eop : 1; + unsigned int stream_cmd : 1; + unsigned int dummy1 : 27; +} reg_dma_rw_intr_mask; +#define REG_RD_ADDR_dma_rw_intr_mask 140 +#define REG_WR_ADDR_dma_rw_intr_mask 140 + +/* Register rw_ack_intr, scope dma, type rw */ +typedef struct { + unsigned int group : 1; + unsigned int ctxt : 1; + unsigned int data : 1; + unsigned int in_eop : 1; + unsigned int stream_cmd : 1; + unsigned int dummy1 : 27; +} reg_dma_rw_ack_intr; +#define REG_RD_ADDR_dma_rw_ack_intr 144 +#define REG_WR_ADDR_dma_rw_ack_intr 144 + +/* Register r_intr, scope dma, type r */ +typedef struct { + unsigned int group : 1; + unsigned int ctxt : 1; + unsigned int data : 1; + unsigned int in_eop : 1; + unsigned int stream_cmd : 1; + unsigned int dummy1 : 27; +} reg_dma_r_intr; +#define REG_RD_ADDR_dma_r_intr 148 + +/* Register r_masked_intr, scope dma, type r */ +typedef struct { + unsigned int group : 1; + unsigned int ctxt : 1; + unsigned int data : 1; + unsigned int in_eop : 1; + unsigned int stream_cmd : 1; + unsigned int dummy1 : 27; +} reg_dma_r_masked_intr; +#define REG_RD_ADDR_dma_r_masked_intr 152 + +/* Register rw_stream_cmd, scope dma, type rw */ +typedef struct { + unsigned int cmd : 10; + unsigned int dummy1 : 6; + unsigned int n : 8; + unsigned int dummy2 : 7; + unsigned int busy : 1; +} reg_dma_rw_stream_cmd; +#define REG_RD_ADDR_dma_rw_stream_cmd 156 +#define REG_WR_ADDR_dma_rw_stream_cmd 156 + + +/* Constants */ +enum { + regk_dma_ack_pkt = 0x00000100, + regk_dma_anytime = 0x00000001, + regk_dma_array = 0x00000008, + regk_dma_burst = 0x00000020, + regk_dma_client = 0x00000002, + regk_dma_copy_next = 0x00000010, + regk_dma_copy_up = 0x00000020, + regk_dma_data_at_eol = 0x00000001, + regk_dma_dis_c = 0x00000010, + regk_dma_dis_g = 0x00000020, + regk_dma_idle = 0x00000001, + regk_dma_intern = 0x00000004, + regk_dma_load_c = 0x00000200, + regk_dma_load_c_n = 0x00000280, + regk_dma_load_c_next = 0x00000240, + regk_dma_load_d = 0x00000140, + regk_dma_load_g = 0x00000300, + regk_dma_load_g_down = 0x000003c0, + regk_dma_load_g_next = 0x00000340, + regk_dma_load_g_up = 0x00000380, + regk_dma_next_en = 0x00000010, + regk_dma_next_pkt = 0x00000010, + regk_dma_no = 0x00000000, + regk_dma_only_at_wait = 0x00000000, + regk_dma_restore = 0x00000020, + regk_dma_rst = 0x00000001, + regk_dma_running = 0x00000004, + regk_dma_rw_cfg_default = 0x00000000, + regk_dma_rw_cmd_default = 0x00000000, + regk_dma_rw_intr_mask_default = 0x00000000, + regk_dma_rw_stat_default = 0x00000101, + regk_dma_rw_stream_cmd_default = 0x00000000, + regk_dma_save_down = 0x00000020, + regk_dma_save_up = 0x00000020, + regk_dma_set_reg = 0x00000050, + regk_dma_set_w_size1 = 0x00000190, + regk_dma_set_w_size2 = 0x000001a0, + regk_dma_set_w_size4 = 0x000001c0, + regk_dma_stopped = 0x00000002, + regk_dma_store_c = 0x00000002, + regk_dma_store_descr = 0x00000000, + regk_dma_store_g = 0x00000004, + regk_dma_store_md = 0x00000001, + regk_dma_sw = 0x00000008, + regk_dma_update_down = 0x00000020, + regk_dma_yes = 0x00000001 +}; +#endif /* __dma_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h b/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h new file mode 100644 index 000000000000..90fe8a28894f --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h @@ -0,0 +1,378 @@ +#ifndef __eth_defs_h +#define __eth_defs_h + +/* + * This file is autogenerated from + * file: eth.r + * id: eth_regs.r,v 1.16 2005/05/20 15:41:22 perz Exp + * last modfied: Mon Jan 9 06:06:41 2006 + * + * by /n/asic/design/tools/rdesc/rdes2c eth.r + * id: $Id: eth_defs.h,v 1.7 2006/01/26 13:45:30 karljope Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope eth */ + +/* Register rw_ma0_lo, scope eth, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_eth_rw_ma0_lo; +#define REG_RD_ADDR_eth_rw_ma0_lo 0 +#define REG_WR_ADDR_eth_rw_ma0_lo 0 + +/* Register rw_ma0_hi, scope eth, type rw */ +typedef struct { + unsigned int addr : 16; + unsigned int dummy1 : 16; +} reg_eth_rw_ma0_hi; +#define REG_RD_ADDR_eth_rw_ma0_hi 4 +#define REG_WR_ADDR_eth_rw_ma0_hi 4 + +/* Register rw_ma1_lo, scope eth, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_eth_rw_ma1_lo; +#define REG_RD_ADDR_eth_rw_ma1_lo 8 +#define REG_WR_ADDR_eth_rw_ma1_lo 8 + +/* Register rw_ma1_hi, scope eth, type rw */ +typedef struct { + unsigned int addr : 16; + unsigned int dummy1 : 16; +} reg_eth_rw_ma1_hi; +#define REG_RD_ADDR_eth_rw_ma1_hi 12 +#define REG_WR_ADDR_eth_rw_ma1_hi 12 + +/* Register rw_ga_lo, scope eth, type rw */ +typedef struct { + unsigned int tbl : 32; +} reg_eth_rw_ga_lo; +#define REG_RD_ADDR_eth_rw_ga_lo 16 +#define REG_WR_ADDR_eth_rw_ga_lo 16 + +/* Register rw_ga_hi, scope eth, type rw */ +typedef struct { + unsigned int tbl : 32; +} reg_eth_rw_ga_hi; +#define REG_RD_ADDR_eth_rw_ga_hi 20 +#define REG_WR_ADDR_eth_rw_ga_hi 20 + +/* Register rw_gen_ctrl, scope eth, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int phy : 2; + unsigned int protocol : 1; + unsigned int loopback : 1; + unsigned int flow_ctrl : 1; + unsigned int gtxclk_out : 1; + unsigned int phyrst_n : 1; + unsigned int dummy1 : 24; +} reg_eth_rw_gen_ctrl; +#define REG_RD_ADDR_eth_rw_gen_ctrl 24 +#define REG_WR_ADDR_eth_rw_gen_ctrl 24 + +/* Register rw_rec_ctrl, scope eth, type rw */ +typedef struct { + unsigned int ma0 : 1; + unsigned int ma1 : 1; + unsigned int individual : 1; + unsigned int broadcast : 1; + unsigned int undersize : 1; + unsigned int oversize : 1; + unsigned int bad_crc : 1; + unsigned int duplex : 1; + unsigned int max_size : 16; + unsigned int dummy1 : 8; +} reg_eth_rw_rec_ctrl; +#define REG_RD_ADDR_eth_rw_rec_ctrl 28 +#define REG_WR_ADDR_eth_rw_rec_ctrl 28 + +/* Register rw_tr_ctrl, scope eth, type rw */ +typedef struct { + unsigned int crc : 1; + unsigned int pad : 1; + unsigned int retry : 1; + unsigned int ignore_col : 1; + unsigned int cancel : 1; + unsigned int hsh_delay : 1; + unsigned int ignore_crs : 1; + unsigned int carrier_ext : 1; + unsigned int dummy1 : 24; +} reg_eth_rw_tr_ctrl; +#define REG_RD_ADDR_eth_rw_tr_ctrl 32 +#define REG_WR_ADDR_eth_rw_tr_ctrl 32 + +/* Register rw_clr_err, scope eth, type rw */ +typedef struct { + unsigned int clr : 1; + unsigned int dummy1 : 31; +} reg_eth_rw_clr_err; +#define REG_RD_ADDR_eth_rw_clr_err 36 +#define REG_WR_ADDR_eth_rw_clr_err 36 + +/* Register rw_mgm_ctrl, scope eth, type rw */ +typedef struct { + unsigned int mdio : 1; + unsigned int mdoe : 1; + unsigned int mdc : 1; + unsigned int dummy1 : 29; +} reg_eth_rw_mgm_ctrl; +#define REG_RD_ADDR_eth_rw_mgm_ctrl 40 +#define REG_WR_ADDR_eth_rw_mgm_ctrl 40 + +/* Register r_stat, scope eth, type r */ +typedef struct { + unsigned int mdio : 1; + unsigned int exc_col : 1; + unsigned int urun : 1; + unsigned int clk_125 : 1; + unsigned int dummy1 : 28; +} reg_eth_r_stat; +#define REG_RD_ADDR_eth_r_stat 44 + +/* Register rs_rec_cnt, scope eth, type rs */ +typedef struct { + unsigned int crc_err : 8; + unsigned int align_err : 8; + unsigned int oversize : 8; + unsigned int congestion : 8; +} reg_eth_rs_rec_cnt; +#define REG_RD_ADDR_eth_rs_rec_cnt 48 + +/* Register r_rec_cnt, scope eth, type r */ +typedef struct { + unsigned int crc_err : 8; + unsigned int align_err : 8; + unsigned int oversize : 8; + unsigned int congestion : 8; +} reg_eth_r_rec_cnt; +#define REG_RD_ADDR_eth_r_rec_cnt 52 + +/* Register rs_tr_cnt, scope eth, type rs */ +typedef struct { + unsigned int single_col : 8; + unsigned int mult_col : 8; + unsigned int late_col : 8; + unsigned int deferred : 8; +} reg_eth_rs_tr_cnt; +#define REG_RD_ADDR_eth_rs_tr_cnt 56 + +/* Register r_tr_cnt, scope eth, type r */ +typedef struct { + unsigned int single_col : 8; + unsigned int mult_col : 8; + unsigned int late_col : 8; + unsigned int deferred : 8; +} reg_eth_r_tr_cnt; +#define REG_RD_ADDR_eth_r_tr_cnt 60 + +/* Register rs_phy_cnt, scope eth, type rs */ +typedef struct { + unsigned int carrier_loss : 8; + unsigned int sqe_err : 8; + unsigned int dummy1 : 16; +} reg_eth_rs_phy_cnt; +#define REG_RD_ADDR_eth_rs_phy_cnt 64 + +/* Register r_phy_cnt, scope eth, type r */ +typedef struct { + unsigned int carrier_loss : 8; + unsigned int sqe_err : 8; + unsigned int dummy1 : 16; +} reg_eth_r_phy_cnt; +#define REG_RD_ADDR_eth_r_phy_cnt 68 + +/* Register rw_test_ctrl, scope eth, type rw */ +typedef struct { + unsigned int snmp_inc : 1; + unsigned int snmp : 1; + unsigned int backoff : 1; + unsigned int dummy1 : 29; +} reg_eth_rw_test_ctrl; +#define REG_RD_ADDR_eth_rw_test_ctrl 72 +#define REG_WR_ADDR_eth_rw_test_ctrl 72 + +/* Register rw_intr_mask, scope eth, type rw */ +typedef struct { + unsigned int crc : 1; + unsigned int align : 1; + unsigned int oversize : 1; + unsigned int congestion : 1; + unsigned int single_col : 1; + unsigned int mult_col : 1; + unsigned int late_col : 1; + unsigned int deferred : 1; + unsigned int carrier_loss : 1; + unsigned int sqe_test_err : 1; + unsigned int orun : 1; + unsigned int urun : 1; + unsigned int exc_col : 1; + unsigned int mdio : 1; + unsigned int dummy1 : 18; +} reg_eth_rw_intr_mask; +#define REG_RD_ADDR_eth_rw_intr_mask 76 +#define REG_WR_ADDR_eth_rw_intr_mask 76 + +/* Register rw_ack_intr, scope eth, type rw */ +typedef struct { + unsigned int crc : 1; + unsigned int align : 1; + unsigned int oversize : 1; + unsigned int congestion : 1; + unsigned int single_col : 1; + unsigned int mult_col : 1; + unsigned int late_col : 1; + unsigned int deferred : 1; + unsigned int carrier_loss : 1; + unsigned int sqe_test_err : 1; + unsigned int orun : 1; + unsigned int urun : 1; + unsigned int exc_col : 1; + unsigned int mdio : 1; + unsigned int dummy1 : 18; +} reg_eth_rw_ack_intr; +#define REG_RD_ADDR_eth_rw_ack_intr 80 +#define REG_WR_ADDR_eth_rw_ack_intr 80 + +/* Register r_intr, scope eth, type r */ +typedef struct { + unsigned int crc : 1; + unsigned int align : 1; + unsigned int oversize : 1; + unsigned int congestion : 1; + unsigned int single_col : 1; + unsigned int mult_col : 1; + unsigned int late_col : 1; + unsigned int deferred : 1; + unsigned int carrier_loss : 1; + unsigned int sqe_test_err : 1; + unsigned int orun : 1; + unsigned int urun : 1; + unsigned int exc_col : 1; + unsigned int mdio : 1; + unsigned int dummy1 : 18; +} reg_eth_r_intr; +#define REG_RD_ADDR_eth_r_intr 84 + +/* Register r_masked_intr, scope eth, type r */ +typedef struct { + unsigned int crc : 1; + unsigned int align : 1; + unsigned int oversize : 1; + unsigned int congestion : 1; + unsigned int single_col : 1; + unsigned int mult_col : 1; + unsigned int late_col : 1; + unsigned int deferred : 1; + unsigned int carrier_loss : 1; + unsigned int sqe_test_err : 1; + unsigned int orun : 1; + unsigned int urun : 1; + unsigned int exc_col : 1; + unsigned int mdio : 1; + unsigned int dummy1 : 18; +} reg_eth_r_masked_intr; +#define REG_RD_ADDR_eth_r_masked_intr 88 + + +/* Constants */ +enum { + regk_eth_discard = 0x00000000, + regk_eth_ether = 0x00000000, + regk_eth_full = 0x00000001, + regk_eth_gmii = 0x00000003, + regk_eth_gtxclk = 0x00000001, + regk_eth_half = 0x00000000, + regk_eth_hsh = 0x00000001, + regk_eth_mii = 0x00000001, + regk_eth_mii_arec = 0x00000002, + regk_eth_mii_clk = 0x00000000, + regk_eth_no = 0x00000000, + regk_eth_phyrst = 0x00000000, + regk_eth_rec = 0x00000001, + regk_eth_rw_ga_hi_default = 0x00000000, + regk_eth_rw_ga_lo_default = 0x00000000, + regk_eth_rw_gen_ctrl_default = 0x00000000, + regk_eth_rw_intr_mask_default = 0x00000000, + regk_eth_rw_ma0_hi_default = 0x00000000, + regk_eth_rw_ma0_lo_default = 0x00000000, + regk_eth_rw_ma1_hi_default = 0x00000000, + regk_eth_rw_ma1_lo_default = 0x00000000, + regk_eth_rw_mgm_ctrl_default = 0x00000000, + regk_eth_rw_test_ctrl_default = 0x00000000, + regk_eth_size1518 = 0x000005ee, + regk_eth_size1522 = 0x000005f2, + regk_eth_yes = 0x00000001 +}; +#endif /* __eth_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/extmem_defs.h b/arch/cris/include/arch-v32/arch/hwregs/extmem_defs.h new file mode 100644 index 000000000000..c47b5ca48ece --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/extmem_defs.h @@ -0,0 +1,369 @@ +#ifndef __extmem_defs_h +#define __extmem_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/ext_mem/mod/extmem_regs.r + * id: extmem_regs.r,v 1.1 2004/02/16 13:29:30 np Exp + * last modfied: Tue Mar 30 22:26:21 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile extmem_defs.h ../../inst/ext_mem/mod/extmem_regs.r + * id: $Id: extmem_defs.h,v 1.5 2004/06/04 07:15:33 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope extmem */ + +/* Register rw_cse0_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_cse0_cfg; +#define REG_RD_ADDR_extmem_rw_cse0_cfg 0 +#define REG_WR_ADDR_extmem_rw_cse0_cfg 0 + +/* Register rw_cse1_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_cse1_cfg; +#define REG_RD_ADDR_extmem_rw_cse1_cfg 4 +#define REG_WR_ADDR_extmem_rw_cse1_cfg 4 + +/* Register rw_csr0_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_csr0_cfg; +#define REG_RD_ADDR_extmem_rw_csr0_cfg 8 +#define REG_WR_ADDR_extmem_rw_csr0_cfg 8 + +/* Register rw_csr1_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_csr1_cfg; +#define REG_RD_ADDR_extmem_rw_csr1_cfg 12 +#define REG_WR_ADDR_extmem_rw_csr1_cfg 12 + +/* Register rw_csp0_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_csp0_cfg; +#define REG_RD_ADDR_extmem_rw_csp0_cfg 16 +#define REG_WR_ADDR_extmem_rw_csp0_cfg 16 + +/* Register rw_csp1_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_csp1_cfg; +#define REG_RD_ADDR_extmem_rw_csp1_cfg 20 +#define REG_WR_ADDR_extmem_rw_csp1_cfg 20 + +/* Register rw_csp2_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_csp2_cfg; +#define REG_RD_ADDR_extmem_rw_csp2_cfg 24 +#define REG_WR_ADDR_extmem_rw_csp2_cfg 24 + +/* Register rw_csp3_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_csp3_cfg; +#define REG_RD_ADDR_extmem_rw_csp3_cfg 28 +#define REG_WR_ADDR_extmem_rw_csp3_cfg 28 + +/* Register rw_csp4_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_csp4_cfg; +#define REG_RD_ADDR_extmem_rw_csp4_cfg 32 +#define REG_WR_ADDR_extmem_rw_csp4_cfg 32 + +/* Register rw_csp5_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_csp5_cfg; +#define REG_RD_ADDR_extmem_rw_csp5_cfg 36 +#define REG_WR_ADDR_extmem_rw_csp5_cfg 36 + +/* Register rw_csp6_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_csp6_cfg; +#define REG_RD_ADDR_extmem_rw_csp6_cfg 40 +#define REG_WR_ADDR_extmem_rw_csp6_cfg 40 + +/* Register rw_css_cfg, scope extmem, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int mode : 1; + unsigned int erc_en : 1; + unsigned int dummy1 : 6; + unsigned int size : 3; + unsigned int log : 1; + unsigned int en : 1; +} reg_extmem_rw_css_cfg; +#define REG_RD_ADDR_extmem_rw_css_cfg 44 +#define REG_WR_ADDR_extmem_rw_css_cfg 44 + +/* Register rw_status_handle, scope extmem, type rw */ +typedef struct { + unsigned int h : 32; +} reg_extmem_rw_status_handle; +#define REG_RD_ADDR_extmem_rw_status_handle 48 +#define REG_WR_ADDR_extmem_rw_status_handle 48 + +/* Register rw_wait_pin, scope extmem, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 15; + unsigned int start : 1; +} reg_extmem_rw_wait_pin; +#define REG_RD_ADDR_extmem_rw_wait_pin 52 +#define REG_WR_ADDR_extmem_rw_wait_pin 52 + +/* Register rw_gated_csp, scope extmem, type rw */ +typedef struct { + unsigned int dummy1 : 31; + unsigned int en : 1; +} reg_extmem_rw_gated_csp; +#define REG_RD_ADDR_extmem_rw_gated_csp 56 +#define REG_WR_ADDR_extmem_rw_gated_csp 56 + + +/* Constants */ +enum { + regk_extmem_b16 = 0x00000001, + regk_extmem_b32 = 0x00000000, + regk_extmem_bwe = 0x00000000, + regk_extmem_cwe = 0x00000001, + regk_extmem_no = 0x00000000, + regk_extmem_rw_cse0_cfg_default = 0x000006cf, + regk_extmem_rw_cse1_cfg_default = 0x000006cf, + regk_extmem_rw_csp0_cfg_default = 0x000006cf, + regk_extmem_rw_csp1_cfg_default = 0x000006cf, + regk_extmem_rw_csp2_cfg_default = 0x000006cf, + regk_extmem_rw_csp3_cfg_default = 0x000006cf, + regk_extmem_rw_csp4_cfg_default = 0x000006cf, + regk_extmem_rw_csp5_cfg_default = 0x000006cf, + regk_extmem_rw_csp6_cfg_default = 0x000006cf, + regk_extmem_rw_csr0_cfg_default = 0x000006cf, + regk_extmem_rw_csr1_cfg_default = 0x000006cf, + regk_extmem_rw_css_cfg_default = 0x000006cf, + regk_extmem_s128KB = 0x00000000, + regk_extmem_s16MB = 0x00000005, + regk_extmem_s1MB = 0x00000001, + regk_extmem_s2MB = 0x00000002, + regk_extmem_s32MB = 0x00000006, + regk_extmem_s4MB = 0x00000003, + regk_extmem_s64MB = 0x00000007, + regk_extmem_s8MB = 0x00000004, + regk_extmem_yes = 0x00000001 +}; +#endif /* __extmem_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile b/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile new file mode 100644 index 000000000000..a90056a095e3 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile @@ -0,0 +1,146 @@ +# $Id: Makefile,v 1.3 2004/01/07 20:34:55 johana Exp $ +# Makefile to generate or copy the latest register definitions +# and related datastructures and helpermacros. +# The offical place for these files is probably at: +RELEASE ?= r1_alfa5 +IOPOFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/ + +IOPROCDIR = /n/asic/design/io/io_proc/rtl + +IOPROCINCL_FILES = +IOPROCINCL_FILES2= +IOPROCINCL_FILES += iop_crc_par_defs.h +IOPROCINCL_FILES += iop_dmc_in_defs.h +IOPROCINCL_FILES += iop_dmc_out_defs.h +IOPROCINCL_FILES += iop_fifo_in_defs.h +IOPROCINCL_FILES += iop_fifo_in_xtra_defs.h +IOPROCINCL_FILES += iop_fifo_out_defs.h +IOPROCINCL_FILES += iop_fifo_out_xtra_defs.h +IOPROCINCL_FILES += iop_mpu_defs.h +IOPROCINCL_FILES2+= iop_mpu_macros.h +IOPROCINCL_FILES2+= iop_reg_space.h +IOPROCINCL_FILES += iop_sap_in_defs.h +IOPROCINCL_FILES += iop_sap_out_defs.h +IOPROCINCL_FILES += iop_scrc_in_defs.h +IOPROCINCL_FILES += iop_scrc_out_defs.h +IOPROCINCL_FILES += iop_spu_defs.h +# in guiness/ +IOPROCINCL_FILES += iop_sw_cfg_defs.h +IOPROCINCL_FILES += iop_sw_cpu_defs.h +IOPROCINCL_FILES += iop_sw_mpu_defs.h +IOPROCINCL_FILES += iop_sw_spu_defs.h +# +IOPROCINCL_FILES += iop_timer_grp_defs.h +IOPROCINCL_FILES += iop_trigger_grp_defs.h +# in guiness/ +IOPROCINCL_FILES += iop_version_defs.h + +IOPROCASMINCL_FILES = $(patsubst %_defs.h,%_defs_asm.h,$(IOPROCINCL_FILES)) +IOPROCASMINCL_FILES+= iop_reg_space_asm.h + + +IOPROCREGDESC = +IOPROCREGDESC += $(IOPROCDIR)/iop_crc_par.r +#IOPROCREGDESC += $(IOPROCDIR)/iop_crc_ser.r +IOPROCREGDESC += $(IOPROCDIR)/iop_dmc_in.r +IOPROCREGDESC += $(IOPROCDIR)/iop_dmc_out.r +IOPROCREGDESC += $(IOPROCDIR)/iop_fifo_in.r +IOPROCREGDESC += $(IOPROCDIR)/iop_fifo_in_xtra.r +IOPROCREGDESC += $(IOPROCDIR)/iop_fifo_out.r +IOPROCREGDESC += $(IOPROCDIR)/iop_fifo_out_xtra.r +IOPROCREGDESC += $(IOPROCDIR)/iop_mpu.r +IOPROCREGDESC += $(IOPROCDIR)/iop_sap_in.r +IOPROCREGDESC += $(IOPROCDIR)/iop_sap_out.r +IOPROCREGDESC += $(IOPROCDIR)/iop_scrc_in.r +IOPROCREGDESC += $(IOPROCDIR)/iop_scrc_out.r +IOPROCREGDESC += $(IOPROCDIR)/iop_spu.r +IOPROCREGDESC += $(IOPROCDIR)/guinness/iop_sw_cfg.r +IOPROCREGDESC += $(IOPROCDIR)/guinness/iop_sw_cpu.r +IOPROCREGDESC += $(IOPROCDIR)/guinness/iop_sw_mpu.r +IOPROCREGDESC += $(IOPROCDIR)/guinness/iop_sw_spu.r +IOPROCREGDESC += $(IOPROCDIR)/iop_timer_grp.r +IOPROCREGDESC += $(IOPROCDIR)/iop_trigger_grp.r +IOPROCREGDESC += $(IOPROCDIR)/guinness/iop_version.r + + +RDES2C = /n/asic/bin/rdes2c +RDES2C = /n/asic/design/tools/rdesc/rdes2c +RDES2INTR = /n/asic/design/tools/rdesc/rdes2intr +RDES2TXT = /n/asic/design/tools/rdesc/rdes2txt + +## all - Just print help - you probably want to do 'make gen' +all: help + +## help - This help +help: + @grep '^## ' Makefile + +## gen - Generate include files +gen: $(IOPROCINCL_FILES) $(IOPROCINCL_FILES2) $(IOPROCASMINCL_FILES) + echo "INCL: $(IOPROCINCL_FILES)" + echo "INCL2: $(IOPROCINCL_FILES2)" + echo "ASMINCL: $(IOPROCASMINCL_FILES)" + +# From the official location... +iop_reg_space.h: $(IOPOFFICIAL_INCDIR)/iop_reg_space.h + cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ +iop_mpu_macros.h: $(IOPOFFICIAL_INCDIR)/iop_mpu_macros.h + cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ + +## copy - Copy files from official location +copy: + @echo "## Copying and fixing iop files ##" + @for HFILE in $(IOPROCINCL_FILES); do \ + echo " $$HFILE"; \ + cat $(IOPOFFICIAL_INCDIR)$$HFILE | sed -e 's/\$$Id\:/id\:/g' > $$HFILE; \ + done + @for HFILE in $(IOPROCINCL_FILES2); do \ + echo " $$HFILE"; \ + cat $(IOPOFFICIAL_INCDIR)$$HFILE | sed -e 's/\$$Id\:/id\:/g' > $$HFILE; \ + done + @echo "## Copying and fixing iop asm files ##" + @for HFILE in $(IOPROCASMINCL_FILES); do \ + echo " $$HFILE"; \ + cat $(IOPOFFICIAL_INCDIR)asm/$$HFILE | sed -e 's/\$$Id\:/id\:/g' > asm/$$HFILE; \ + done + +# I/O processor files: +## iop - Generate I/O processor include files +iop: $(IOPROCINCL_FILES) $(IOPROCINCL_FILES2) $(IOPROCASMINCL_FILES) +iop_sw_%_defs.h: $(IOPROCDIR)/guinness/iop_sw_%.r + $(RDES2C) $< +iop_version_defs.h: $(IOPROCDIR)/guinness/iop_version.r + $(RDES2C) $< +%_defs.h: $(IOPROCDIR)/%.r + $(RDES2C) $< +%_defs_asm.h: $(IOPROCDIR)/%.r + $(RDES2C) -asm $< +iop_version_defs_asm.h: $(IOPROCDIR)/guinness/iop_version.r + $(RDES2C) -asm $< + +## doc - Generate .axw files from register description. +doc: $(IOPROCREGDESC) + for RDES in $^; do \ + $(RDES2TXT) $$RDES; \ + done + +.PHONY: axw +## %.axw - Generate the specified .axw file (doesn't work for all files +## due to inconsistent naming of .r files. +%.axw: axw + @for RDES in $(IOPROCREGDESC); do \ + if echo "$$RDES" | grep $* ; then \ + $(RDES2TXT) $$RDES; \ + fi \ + done + +.PHONY: clean +## clean - Remove .h files and .axw files. +clean: + rm -rf $(IOPROCINCL_FILES) *.axw + +.PHONY: cleandoc +## cleandoc - Remove .axw files. +cleandoc: + rm -rf *.axw + diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_crc_par_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_crc_par_defs_asm.h new file mode 100644 index 000000000000..a4b58000c164 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_crc_par_defs_asm.h @@ -0,0 +1,171 @@ +#ifndef __iop_crc_par_defs_asm_h +#define __iop_crc_par_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_crc_par.r + * id: + * last modfied: Mon Apr 11 16:08:45 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_crc_par_defs_asm.h ../../inst/io_proc/rtl/iop_crc_par.r + * id: $Id: iop_crc_par_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_cfg___mode___lsb 0 +#define reg_iop_crc_par_rw_cfg___mode___width 1 +#define reg_iop_crc_par_rw_cfg___mode___bit 0 +#define reg_iop_crc_par_rw_cfg___crc_out___lsb 1 +#define reg_iop_crc_par_rw_cfg___crc_out___width 1 +#define reg_iop_crc_par_rw_cfg___crc_out___bit 1 +#define reg_iop_crc_par_rw_cfg___rev_out___lsb 2 +#define reg_iop_crc_par_rw_cfg___rev_out___width 1 +#define reg_iop_crc_par_rw_cfg___rev_out___bit 2 +#define reg_iop_crc_par_rw_cfg___inv_out___lsb 3 +#define reg_iop_crc_par_rw_cfg___inv_out___width 1 +#define reg_iop_crc_par_rw_cfg___inv_out___bit 3 +#define reg_iop_crc_par_rw_cfg___trig___lsb 4 +#define reg_iop_crc_par_rw_cfg___trig___width 2 +#define reg_iop_crc_par_rw_cfg___poly___lsb 6 +#define reg_iop_crc_par_rw_cfg___poly___width 3 +#define reg_iop_crc_par_rw_cfg_offset 0 + +/* Register rw_init_crc, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_init_crc_offset 4 + +/* Register rw_correct_crc, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_correct_crc_offset 8 + +/* Register rw_ctrl, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_ctrl___en___lsb 0 +#define reg_iop_crc_par_rw_ctrl___en___width 1 +#define reg_iop_crc_par_rw_ctrl___en___bit 0 +#define reg_iop_crc_par_rw_ctrl_offset 12 + +/* Register rw_set_last, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_set_last___tr_dif___lsb 0 +#define reg_iop_crc_par_rw_set_last___tr_dif___width 1 +#define reg_iop_crc_par_rw_set_last___tr_dif___bit 0 +#define reg_iop_crc_par_rw_set_last_offset 16 + +/* Register rw_wr1byte, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_wr1byte___data___lsb 0 +#define reg_iop_crc_par_rw_wr1byte___data___width 8 +#define reg_iop_crc_par_rw_wr1byte_offset 20 + +/* Register rw_wr2byte, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_wr2byte___data___lsb 0 +#define reg_iop_crc_par_rw_wr2byte___data___width 16 +#define reg_iop_crc_par_rw_wr2byte_offset 24 + +/* Register rw_wr3byte, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_wr3byte___data___lsb 0 +#define reg_iop_crc_par_rw_wr3byte___data___width 24 +#define reg_iop_crc_par_rw_wr3byte_offset 28 + +/* Register rw_wr4byte, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_wr4byte___data___lsb 0 +#define reg_iop_crc_par_rw_wr4byte___data___width 32 +#define reg_iop_crc_par_rw_wr4byte_offset 32 + +/* Register rw_wr1byte_last, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_wr1byte_last___data___lsb 0 +#define reg_iop_crc_par_rw_wr1byte_last___data___width 8 +#define reg_iop_crc_par_rw_wr1byte_last_offset 36 + +/* Register rw_wr2byte_last, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_wr2byte_last___data___lsb 0 +#define reg_iop_crc_par_rw_wr2byte_last___data___width 16 +#define reg_iop_crc_par_rw_wr2byte_last_offset 40 + +/* Register rw_wr3byte_last, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_wr3byte_last___data___lsb 0 +#define reg_iop_crc_par_rw_wr3byte_last___data___width 24 +#define reg_iop_crc_par_rw_wr3byte_last_offset 44 + +/* Register rw_wr4byte_last, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_wr4byte_last___data___lsb 0 +#define reg_iop_crc_par_rw_wr4byte_last___data___width 32 +#define reg_iop_crc_par_rw_wr4byte_last_offset 48 + +/* Register r_stat, scope iop_crc_par, type r */ +#define reg_iop_crc_par_r_stat___err___lsb 0 +#define reg_iop_crc_par_r_stat___err___width 1 +#define reg_iop_crc_par_r_stat___err___bit 0 +#define reg_iop_crc_par_r_stat___busy___lsb 1 +#define reg_iop_crc_par_r_stat___busy___width 1 +#define reg_iop_crc_par_r_stat___busy___bit 1 +#define reg_iop_crc_par_r_stat_offset 52 + +/* Register r_sh_reg, scope iop_crc_par, type r */ +#define reg_iop_crc_par_r_sh_reg_offset 56 + +/* Register r_crc, scope iop_crc_par, type r */ +#define reg_iop_crc_par_r_crc_offset 60 + +/* Register rw_strb_rec_dif_in, scope iop_crc_par, type rw */ +#define reg_iop_crc_par_rw_strb_rec_dif_in___last___lsb 0 +#define reg_iop_crc_par_rw_strb_rec_dif_in___last___width 2 +#define reg_iop_crc_par_rw_strb_rec_dif_in_offset 64 + + +/* Constants */ +#define regk_iop_crc_par_calc 0x00000001 +#define regk_iop_crc_par_ccitt 0x00000002 +#define regk_iop_crc_par_check 0x00000000 +#define regk_iop_crc_par_crc16 0x00000001 +#define regk_iop_crc_par_crc32 0x00000000 +#define regk_iop_crc_par_crc5 0x00000003 +#define regk_iop_crc_par_crc5_11 0x00000004 +#define regk_iop_crc_par_dif_in 0x00000002 +#define regk_iop_crc_par_hi 0x00000000 +#define regk_iop_crc_par_neg 0x00000002 +#define regk_iop_crc_par_no 0x00000000 +#define regk_iop_crc_par_pos 0x00000001 +#define regk_iop_crc_par_pos_neg 0x00000003 +#define regk_iop_crc_par_rw_cfg_default 0x00000000 +#define regk_iop_crc_par_rw_ctrl_default 0x00000000 +#define regk_iop_crc_par_yes 0x00000001 +#endif /* __iop_crc_par_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_dmc_in_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_dmc_in_defs_asm.h new file mode 100644 index 000000000000..e7d539feccb1 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_dmc_in_defs_asm.h @@ -0,0 +1,321 @@ +#ifndef __iop_dmc_in_defs_asm_h +#define __iop_dmc_in_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_dmc_in.r + * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_dmc_in_defs_asm.h ../../inst/io_proc/rtl/iop_dmc_in.r + * id: $Id: iop_dmc_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_cfg___sth_intr___lsb 0 +#define reg_iop_dmc_in_rw_cfg___sth_intr___width 3 +#define reg_iop_dmc_in_rw_cfg___last_dis_dif___lsb 3 +#define reg_iop_dmc_in_rw_cfg___last_dis_dif___width 1 +#define reg_iop_dmc_in_rw_cfg___last_dis_dif___bit 3 +#define reg_iop_dmc_in_rw_cfg_offset 0 + +/* Register rw_ctrl, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_ctrl___dif_en___lsb 0 +#define reg_iop_dmc_in_rw_ctrl___dif_en___width 1 +#define reg_iop_dmc_in_rw_ctrl___dif_en___bit 0 +#define reg_iop_dmc_in_rw_ctrl___dif_dis___lsb 1 +#define reg_iop_dmc_in_rw_ctrl___dif_dis___width 1 +#define reg_iop_dmc_in_rw_ctrl___dif_dis___bit 1 +#define reg_iop_dmc_in_rw_ctrl___stream_clr___lsb 2 +#define reg_iop_dmc_in_rw_ctrl___stream_clr___width 1 +#define reg_iop_dmc_in_rw_ctrl___stream_clr___bit 2 +#define reg_iop_dmc_in_rw_ctrl_offset 4 + +/* Register r_stat, scope iop_dmc_in, type r */ +#define reg_iop_dmc_in_r_stat___dif_en___lsb 0 +#define reg_iop_dmc_in_r_stat___dif_en___width 1 +#define reg_iop_dmc_in_r_stat___dif_en___bit 0 +#define reg_iop_dmc_in_r_stat_offset 8 + +/* Register rw_stream_cmd, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_stream_cmd___cmd___lsb 0 +#define reg_iop_dmc_in_rw_stream_cmd___cmd___width 10 +#define reg_iop_dmc_in_rw_stream_cmd___n___lsb 16 +#define reg_iop_dmc_in_rw_stream_cmd___n___width 8 +#define reg_iop_dmc_in_rw_stream_cmd_offset 12 + +/* Register rw_stream_wr_data, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_stream_wr_data_offset 16 + +/* Register rw_stream_wr_data_last, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_stream_wr_data_last_offset 20 + +/* Register rw_stream_ctrl, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_stream_ctrl___eop___lsb 0 +#define reg_iop_dmc_in_rw_stream_ctrl___eop___width 1 +#define reg_iop_dmc_in_rw_stream_ctrl___eop___bit 0 +#define reg_iop_dmc_in_rw_stream_ctrl___wait___lsb 1 +#define reg_iop_dmc_in_rw_stream_ctrl___wait___width 1 +#define reg_iop_dmc_in_rw_stream_ctrl___wait___bit 1 +#define reg_iop_dmc_in_rw_stream_ctrl___keep_md___lsb 2 +#define reg_iop_dmc_in_rw_stream_ctrl___keep_md___width 1 +#define reg_iop_dmc_in_rw_stream_ctrl___keep_md___bit 2 +#define reg_iop_dmc_in_rw_stream_ctrl___size___lsb 3 +#define reg_iop_dmc_in_rw_stream_ctrl___size___width 3 +#define reg_iop_dmc_in_rw_stream_ctrl_offset 24 + +/* Register r_stream_stat, scope iop_dmc_in, type r */ +#define reg_iop_dmc_in_r_stream_stat___sth___lsb 0 +#define reg_iop_dmc_in_r_stream_stat___sth___width 7 +#define reg_iop_dmc_in_r_stream_stat___full___lsb 16 +#define reg_iop_dmc_in_r_stream_stat___full___width 1 +#define reg_iop_dmc_in_r_stream_stat___full___bit 16 +#define reg_iop_dmc_in_r_stream_stat___last_pkt___lsb 17 +#define reg_iop_dmc_in_r_stream_stat___last_pkt___width 1 +#define reg_iop_dmc_in_r_stream_stat___last_pkt___bit 17 +#define reg_iop_dmc_in_r_stream_stat___data_md_valid___lsb 18 +#define reg_iop_dmc_in_r_stream_stat___data_md_valid___width 1 +#define reg_iop_dmc_in_r_stream_stat___data_md_valid___bit 18 +#define reg_iop_dmc_in_r_stream_stat___ctxt_md_valid___lsb 19 +#define reg_iop_dmc_in_r_stream_stat___ctxt_md_valid___width 1 +#define reg_iop_dmc_in_r_stream_stat___ctxt_md_valid___bit 19 +#define reg_iop_dmc_in_r_stream_stat___group_md_valid___lsb 20 +#define reg_iop_dmc_in_r_stream_stat___group_md_valid___width 1 +#define reg_iop_dmc_in_r_stream_stat___group_md_valid___bit 20 +#define reg_iop_dmc_in_r_stream_stat___stream_busy___lsb 21 +#define reg_iop_dmc_in_r_stream_stat___stream_busy___width 1 +#define reg_iop_dmc_in_r_stream_stat___stream_busy___bit 21 +#define reg_iop_dmc_in_r_stream_stat___cmd_rdy___lsb 22 +#define reg_iop_dmc_in_r_stream_stat___cmd_rdy___width 1 +#define reg_iop_dmc_in_r_stream_stat___cmd_rdy___bit 22 +#define reg_iop_dmc_in_r_stream_stat_offset 28 + +/* Register r_data_descr, scope iop_dmc_in, type r */ +#define reg_iop_dmc_in_r_data_descr___ctrl___lsb 0 +#define reg_iop_dmc_in_r_data_descr___ctrl___width 8 +#define reg_iop_dmc_in_r_data_descr___stat___lsb 8 +#define reg_iop_dmc_in_r_data_descr___stat___width 8 +#define reg_iop_dmc_in_r_data_descr___md___lsb 16 +#define reg_iop_dmc_in_r_data_descr___md___width 16 +#define reg_iop_dmc_in_r_data_descr_offset 32 + +/* Register r_ctxt_descr, scope iop_dmc_in, type r */ +#define reg_iop_dmc_in_r_ctxt_descr___ctrl___lsb 0 +#define reg_iop_dmc_in_r_ctxt_descr___ctrl___width 8 +#define reg_iop_dmc_in_r_ctxt_descr___stat___lsb 8 +#define reg_iop_dmc_in_r_ctxt_descr___stat___width 8 +#define reg_iop_dmc_in_r_ctxt_descr___md0___lsb 16 +#define reg_iop_dmc_in_r_ctxt_descr___md0___width 16 +#define reg_iop_dmc_in_r_ctxt_descr_offset 36 + +/* Register r_ctxt_descr_md1, scope iop_dmc_in, type r */ +#define reg_iop_dmc_in_r_ctxt_descr_md1_offset 40 + +/* Register r_ctxt_descr_md2, scope iop_dmc_in, type r */ +#define reg_iop_dmc_in_r_ctxt_descr_md2_offset 44 + +/* Register r_group_descr, scope iop_dmc_in, type r */ +#define reg_iop_dmc_in_r_group_descr___ctrl___lsb 0 +#define reg_iop_dmc_in_r_group_descr___ctrl___width 8 +#define reg_iop_dmc_in_r_group_descr___stat___lsb 8 +#define reg_iop_dmc_in_r_group_descr___stat___width 8 +#define reg_iop_dmc_in_r_group_descr___md___lsb 16 +#define reg_iop_dmc_in_r_group_descr___md___width 16 +#define reg_iop_dmc_in_r_group_descr_offset 56 + +/* Register rw_data_descr, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_data_descr___md___lsb 16 +#define reg_iop_dmc_in_rw_data_descr___md___width 16 +#define reg_iop_dmc_in_rw_data_descr_offset 60 + +/* Register rw_ctxt_descr, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_ctxt_descr___md0___lsb 16 +#define reg_iop_dmc_in_rw_ctxt_descr___md0___width 16 +#define reg_iop_dmc_in_rw_ctxt_descr_offset 64 + +/* Register rw_ctxt_descr_md1, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_ctxt_descr_md1_offset 68 + +/* Register rw_ctxt_descr_md2, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_ctxt_descr_md2_offset 72 + +/* Register rw_group_descr, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_group_descr___md___lsb 16 +#define reg_iop_dmc_in_rw_group_descr___md___width 16 +#define reg_iop_dmc_in_rw_group_descr_offset 84 + +/* Register rw_intr_mask, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_intr_mask___data_md___lsb 0 +#define reg_iop_dmc_in_rw_intr_mask___data_md___width 1 +#define reg_iop_dmc_in_rw_intr_mask___data_md___bit 0 +#define reg_iop_dmc_in_rw_intr_mask___ctxt_md___lsb 1 +#define reg_iop_dmc_in_rw_intr_mask___ctxt_md___width 1 +#define reg_iop_dmc_in_rw_intr_mask___ctxt_md___bit 1 +#define reg_iop_dmc_in_rw_intr_mask___group_md___lsb 2 +#define reg_iop_dmc_in_rw_intr_mask___group_md___width 1 +#define reg_iop_dmc_in_rw_intr_mask___group_md___bit 2 +#define reg_iop_dmc_in_rw_intr_mask___cmd_rdy___lsb 3 +#define reg_iop_dmc_in_rw_intr_mask___cmd_rdy___width 1 +#define reg_iop_dmc_in_rw_intr_mask___cmd_rdy___bit 3 +#define reg_iop_dmc_in_rw_intr_mask___sth___lsb 4 +#define reg_iop_dmc_in_rw_intr_mask___sth___width 1 +#define reg_iop_dmc_in_rw_intr_mask___sth___bit 4 +#define reg_iop_dmc_in_rw_intr_mask___full___lsb 5 +#define reg_iop_dmc_in_rw_intr_mask___full___width 1 +#define reg_iop_dmc_in_rw_intr_mask___full___bit 5 +#define reg_iop_dmc_in_rw_intr_mask_offset 88 + +/* Register rw_ack_intr, scope iop_dmc_in, type rw */ +#define reg_iop_dmc_in_rw_ack_intr___data_md___lsb 0 +#define reg_iop_dmc_in_rw_ack_intr___data_md___width 1 +#define reg_iop_dmc_in_rw_ack_intr___data_md___bit 0 +#define reg_iop_dmc_in_rw_ack_intr___ctxt_md___lsb 1 +#define reg_iop_dmc_in_rw_ack_intr___ctxt_md___width 1 +#define reg_iop_dmc_in_rw_ack_intr___ctxt_md___bit 1 +#define reg_iop_dmc_in_rw_ack_intr___group_md___lsb 2 +#define reg_iop_dmc_in_rw_ack_intr___group_md___width 1 +#define reg_iop_dmc_in_rw_ack_intr___group_md___bit 2 +#define reg_iop_dmc_in_rw_ack_intr___cmd_rdy___lsb 3 +#define reg_iop_dmc_in_rw_ack_intr___cmd_rdy___width 1 +#define reg_iop_dmc_in_rw_ack_intr___cmd_rdy___bit 3 +#define reg_iop_dmc_in_rw_ack_intr___sth___lsb 4 +#define reg_iop_dmc_in_rw_ack_intr___sth___width 1 +#define reg_iop_dmc_in_rw_ack_intr___sth___bit 4 +#define reg_iop_dmc_in_rw_ack_intr___full___lsb 5 +#define reg_iop_dmc_in_rw_ack_intr___full___width 1 +#define reg_iop_dmc_in_rw_ack_intr___full___bit 5 +#define reg_iop_dmc_in_rw_ack_intr_offset 92 + +/* Register r_intr, scope iop_dmc_in, type r */ +#define reg_iop_dmc_in_r_intr___data_md___lsb 0 +#define reg_iop_dmc_in_r_intr___data_md___width 1 +#define reg_iop_dmc_in_r_intr___data_md___bit 0 +#define reg_iop_dmc_in_r_intr___ctxt_md___lsb 1 +#define reg_iop_dmc_in_r_intr___ctxt_md___width 1 +#define reg_iop_dmc_in_r_intr___ctxt_md___bit 1 +#define reg_iop_dmc_in_r_intr___group_md___lsb 2 +#define reg_iop_dmc_in_r_intr___group_md___width 1 +#define reg_iop_dmc_in_r_intr___group_md___bit 2 +#define reg_iop_dmc_in_r_intr___cmd_rdy___lsb 3 +#define reg_iop_dmc_in_r_intr___cmd_rdy___width 1 +#define reg_iop_dmc_in_r_intr___cmd_rdy___bit 3 +#define reg_iop_dmc_in_r_intr___sth___lsb 4 +#define reg_iop_dmc_in_r_intr___sth___width 1 +#define reg_iop_dmc_in_r_intr___sth___bit 4 +#define reg_iop_dmc_in_r_intr___full___lsb 5 +#define reg_iop_dmc_in_r_intr___full___width 1 +#define reg_iop_dmc_in_r_intr___full___bit 5 +#define reg_iop_dmc_in_r_intr_offset 96 + +/* Register r_masked_intr, scope iop_dmc_in, type r */ +#define reg_iop_dmc_in_r_masked_intr___data_md___lsb 0 +#define reg_iop_dmc_in_r_masked_intr___data_md___width 1 +#define reg_iop_dmc_in_r_masked_intr___data_md___bit 0 +#define reg_iop_dmc_in_r_masked_intr___ctxt_md___lsb 1 +#define reg_iop_dmc_in_r_masked_intr___ctxt_md___width 1 +#define reg_iop_dmc_in_r_masked_intr___ctxt_md___bit 1 +#define reg_iop_dmc_in_r_masked_intr___group_md___lsb 2 +#define reg_iop_dmc_in_r_masked_intr___group_md___width 1 +#define reg_iop_dmc_in_r_masked_intr___group_md___bit 2 +#define reg_iop_dmc_in_r_masked_intr___cmd_rdy___lsb 3 +#define reg_iop_dmc_in_r_masked_intr___cmd_rdy___width 1 +#define reg_iop_dmc_in_r_masked_intr___cmd_rdy___bit 3 +#define reg_iop_dmc_in_r_masked_intr___sth___lsb 4 +#define reg_iop_dmc_in_r_masked_intr___sth___width 1 +#define reg_iop_dmc_in_r_masked_intr___sth___bit 4 +#define reg_iop_dmc_in_r_masked_intr___full___lsb 5 +#define reg_iop_dmc_in_r_masked_intr___full___width 1 +#define reg_iop_dmc_in_r_masked_intr___full___bit 5 +#define reg_iop_dmc_in_r_masked_intr_offset 100 + + +/* Constants */ +#define regk_iop_dmc_in_ack_pkt 0x00000100 +#define regk_iop_dmc_in_array 0x00000008 +#define regk_iop_dmc_in_burst 0x00000020 +#define regk_iop_dmc_in_copy_next 0x00000010 +#define regk_iop_dmc_in_copy_up 0x00000020 +#define regk_iop_dmc_in_dis_c 0x00000010 +#define regk_iop_dmc_in_dis_g 0x00000020 +#define regk_iop_dmc_in_lim1 0x00000000 +#define regk_iop_dmc_in_lim16 0x00000004 +#define regk_iop_dmc_in_lim2 0x00000001 +#define regk_iop_dmc_in_lim32 0x00000005 +#define regk_iop_dmc_in_lim4 0x00000002 +#define regk_iop_dmc_in_lim64 0x00000006 +#define regk_iop_dmc_in_lim8 0x00000003 +#define regk_iop_dmc_in_load_c 0x00000200 +#define regk_iop_dmc_in_load_c_n 0x00000280 +#define regk_iop_dmc_in_load_c_next 0x00000240 +#define regk_iop_dmc_in_load_d 0x00000140 +#define regk_iop_dmc_in_load_g 0x00000300 +#define regk_iop_dmc_in_load_g_down 0x000003c0 +#define regk_iop_dmc_in_load_g_next 0x00000340 +#define regk_iop_dmc_in_load_g_up 0x00000380 +#define regk_iop_dmc_in_next_en 0x00000010 +#define regk_iop_dmc_in_next_pkt 0x00000010 +#define regk_iop_dmc_in_no 0x00000000 +#define regk_iop_dmc_in_restore 0x00000020 +#define regk_iop_dmc_in_rw_cfg_default 0x00000000 +#define regk_iop_dmc_in_rw_ctxt_descr_default 0x00000000 +#define regk_iop_dmc_in_rw_ctxt_descr_md1_default 0x00000000 +#define regk_iop_dmc_in_rw_ctxt_descr_md2_default 0x00000000 +#define regk_iop_dmc_in_rw_data_descr_default 0x00000000 +#define regk_iop_dmc_in_rw_group_descr_default 0x00000000 +#define regk_iop_dmc_in_rw_intr_mask_default 0x00000000 +#define regk_iop_dmc_in_rw_stream_ctrl_default 0x00000000 +#define regk_iop_dmc_in_save_down 0x00000020 +#define regk_iop_dmc_in_save_up 0x00000020 +#define regk_iop_dmc_in_set_reg 0x00000050 +#define regk_iop_dmc_in_set_w_size1 0x00000190 +#define regk_iop_dmc_in_set_w_size2 0x000001a0 +#define regk_iop_dmc_in_set_w_size4 0x000001c0 +#define regk_iop_dmc_in_store_c 0x00000002 +#define regk_iop_dmc_in_store_descr 0x00000000 +#define regk_iop_dmc_in_store_g 0x00000004 +#define regk_iop_dmc_in_store_md 0x00000001 +#define regk_iop_dmc_in_update_down 0x00000020 +#define regk_iop_dmc_in_yes 0x00000001 +#endif /* __iop_dmc_in_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_dmc_out_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_dmc_out_defs_asm.h new file mode 100644 index 000000000000..9fe1a8054371 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_dmc_out_defs_asm.h @@ -0,0 +1,349 @@ +#ifndef __iop_dmc_out_defs_asm_h +#define __iop_dmc_out_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_dmc_out.r + * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_dmc_out_defs_asm.h ../../inst/io_proc/rtl/iop_dmc_out.r + * id: $Id: iop_dmc_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope iop_dmc_out, type rw */ +#define reg_iop_dmc_out_rw_cfg___trf_lim___lsb 0 +#define reg_iop_dmc_out_rw_cfg___trf_lim___width 16 +#define reg_iop_dmc_out_rw_cfg___last_at_trf_lim___lsb 16 +#define reg_iop_dmc_out_rw_cfg___last_at_trf_lim___width 1 +#define reg_iop_dmc_out_rw_cfg___last_at_trf_lim___bit 16 +#define reg_iop_dmc_out_rw_cfg___dth_intr___lsb 17 +#define reg_iop_dmc_out_rw_cfg___dth_intr___width 3 +#define reg_iop_dmc_out_rw_cfg_offset 0 + +/* Register rw_ctrl, scope iop_dmc_out, type rw */ +#define reg_iop_dmc_out_rw_ctrl___dif_en___lsb 0 +#define reg_iop_dmc_out_rw_ctrl___dif_en___width 1 +#define reg_iop_dmc_out_rw_ctrl___dif_en___bit 0 +#define reg_iop_dmc_out_rw_ctrl___dif_dis___lsb 1 +#define reg_iop_dmc_out_rw_ctrl___dif_dis___width 1 +#define reg_iop_dmc_out_rw_ctrl___dif_dis___bit 1 +#define reg_iop_dmc_out_rw_ctrl_offset 4 + +/* Register r_stat, scope iop_dmc_out, type r */ +#define reg_iop_dmc_out_r_stat___dif_en___lsb 0 +#define reg_iop_dmc_out_r_stat___dif_en___width 1 +#define reg_iop_dmc_out_r_stat___dif_en___bit 0 +#define reg_iop_dmc_out_r_stat_offset 8 + +/* Register rw_stream_cmd, scope iop_dmc_out, type rw */ +#define reg_iop_dmc_out_rw_stream_cmd___cmd___lsb 0 +#define reg_iop_dmc_out_rw_stream_cmd___cmd___width 10 +#define reg_iop_dmc_out_rw_stream_cmd___n___lsb 16 +#define reg_iop_dmc_out_rw_stream_cmd___n___width 8 +#define reg_iop_dmc_out_rw_stream_cmd_offset 12 + +/* Register rs_stream_data, scope iop_dmc_out, type rs */ +#define reg_iop_dmc_out_rs_stream_data_offset 16 + +/* Register r_stream_data, scope iop_dmc_out, type r */ +#define reg_iop_dmc_out_r_stream_data_offset 20 + +/* Register r_stream_stat, scope iop_dmc_out, type r */ +#define reg_iop_dmc_out_r_stream_stat___dth___lsb 0 +#define reg_iop_dmc_out_r_stream_stat___dth___width 7 +#define reg_iop_dmc_out_r_stream_stat___dv___lsb 16 +#define reg_iop_dmc_out_r_stream_stat___dv___width 1 +#define reg_iop_dmc_out_r_stream_stat___dv___bit 16 +#define reg_iop_dmc_out_r_stream_stat___all_avail___lsb 17 +#define reg_iop_dmc_out_r_stream_stat___all_avail___width 1 +#define reg_iop_dmc_out_r_stream_stat___all_avail___bit 17 +#define reg_iop_dmc_out_r_stream_stat___last___lsb 18 +#define reg_iop_dmc_out_r_stream_stat___last___width 1 +#define reg_iop_dmc_out_r_stream_stat___last___bit 18 +#define reg_iop_dmc_out_r_stream_stat___size___lsb 19 +#define reg_iop_dmc_out_r_stream_stat___size___width 3 +#define reg_iop_dmc_out_r_stream_stat___data_md_valid___lsb 22 +#define reg_iop_dmc_out_r_stream_stat___data_md_valid___width 1 +#define reg_iop_dmc_out_r_stream_stat___data_md_valid___bit 22 +#define reg_iop_dmc_out_r_stream_stat___ctxt_md_valid___lsb 23 +#define reg_iop_dmc_out_r_stream_stat___ctxt_md_valid___width 1 +#define reg_iop_dmc_out_r_stream_stat___ctxt_md_valid___bit 23 +#define reg_iop_dmc_out_r_stream_stat___group_md_valid___lsb 24 +#define reg_iop_dmc_out_r_stream_stat___group_md_valid___width 1 +#define reg_iop_dmc_out_r_stream_stat___group_md_valid___bit 24 +#define reg_iop_dmc_out_r_stream_stat___stream_busy___lsb 25 +#define reg_iop_dmc_out_r_stream_stat___stream_busy___width 1 +#define reg_iop_dmc_out_r_stream_stat___stream_busy___bit 25 +#define reg_iop_dmc_out_r_stream_stat___cmd_rdy___lsb 26 +#define reg_iop_dmc_out_r_stream_stat___cmd_rdy___width 1 +#define reg_iop_dmc_out_r_stream_stat___cmd_rdy___bit 26 +#define reg_iop_dmc_out_r_stream_stat___cmd_rq___lsb 27 +#define reg_iop_dmc_out_r_stream_stat___cmd_rq___width 1 +#define reg_iop_dmc_out_r_stream_stat___cmd_rq___bit 27 +#define reg_iop_dmc_out_r_stream_stat_offset 24 + +/* Register r_data_descr, scope iop_dmc_out, type r */ +#define reg_iop_dmc_out_r_data_descr___ctrl___lsb 0 +#define reg_iop_dmc_out_r_data_descr___ctrl___width 8 +#define reg_iop_dmc_out_r_data_descr___stat___lsb 8 +#define reg_iop_dmc_out_r_data_descr___stat___width 8 +#define reg_iop_dmc_out_r_data_descr___md___lsb 16 +#define reg_iop_dmc_out_r_data_descr___md___width 16 +#define reg_iop_dmc_out_r_data_descr_offset 28 + +/* Register r_ctxt_descr, scope iop_dmc_out, type r */ +#define reg_iop_dmc_out_r_ctxt_descr___ctrl___lsb 0 +#define reg_iop_dmc_out_r_ctxt_descr___ctrl___width 8 +#define reg_iop_dmc_out_r_ctxt_descr___stat___lsb 8 +#define reg_iop_dmc_out_r_ctxt_descr___stat___width 8 +#define reg_iop_dmc_out_r_ctxt_descr___md0___lsb 16 +#define reg_iop_dmc_out_r_ctxt_descr___md0___width 16 +#define reg_iop_dmc_out_r_ctxt_descr_offset 32 + +/* Register r_ctxt_descr_md1, scope iop_dmc_out, type r */ +#define reg_iop_dmc_out_r_ctxt_descr_md1_offset 36 + +/* Register r_ctxt_descr_md2, scope iop_dmc_out, type r */ +#define reg_iop_dmc_out_r_ctxt_descr_md2_offset 40 + +/* Register r_group_descr, scope iop_dmc_out, type r */ +#define reg_iop_dmc_out_r_group_descr___ctrl___lsb 0 +#define reg_iop_dmc_out_r_group_descr___ctrl___width 8 +#define reg_iop_dmc_out_r_group_descr___stat___lsb 8 +#define reg_iop_dmc_out_r_group_descr___stat___width 8 +#define reg_iop_dmc_out_r_group_descr___md___lsb 16 +#define reg_iop_dmc_out_r_group_descr___md___width 16 +#define reg_iop_dmc_out_r_group_descr_offset 52 + +/* Register rw_data_descr, scope iop_dmc_out, type rw */ +#define reg_iop_dmc_out_rw_data_descr___md___lsb 16 +#define reg_iop_dmc_out_rw_data_descr___md___width 16 +#define reg_iop_dmc_out_rw_data_descr_offset 56 + +/* Register rw_ctxt_descr, scope iop_dmc_out, type rw */ +#define reg_iop_dmc_out_rw_ctxt_descr___md0___lsb 16 +#define reg_iop_dmc_out_rw_ctxt_descr___md0___width 16 +#define reg_iop_dmc_out_rw_ctxt_descr_offset 60 + +/* Register rw_ctxt_descr_md1, scope iop_dmc_out, type rw */ +#define reg_iop_dmc_out_rw_ctxt_descr_md1_offset 64 + +/* Register rw_ctxt_descr_md2, scope iop_dmc_out, type rw */ +#define reg_iop_dmc_out_rw_ctxt_descr_md2_offset 68 + +/* Register rw_group_descr, scope iop_dmc_out, type rw */ +#define reg_iop_dmc_out_rw_group_descr___md___lsb 16 +#define reg_iop_dmc_out_rw_group_descr___md___width 16 +#define reg_iop_dmc_out_rw_group_descr_offset 80 + +/* Register rw_intr_mask, scope iop_dmc_out, type rw */ +#define reg_iop_dmc_out_rw_intr_mask___data_md___lsb 0 +#define reg_iop_dmc_out_rw_intr_mask___data_md___width 1 +#define reg_iop_dmc_out_rw_intr_mask___data_md___bit 0 +#define reg_iop_dmc_out_rw_intr_mask___ctxt_md___lsb 1 +#define reg_iop_dmc_out_rw_intr_mask___ctxt_md___width 1 +#define reg_iop_dmc_out_rw_intr_mask___ctxt_md___bit 1 +#define reg_iop_dmc_out_rw_intr_mask___group_md___lsb 2 +#define reg_iop_dmc_out_rw_intr_mask___group_md___width 1 +#define reg_iop_dmc_out_rw_intr_mask___group_md___bit 2 +#define reg_iop_dmc_out_rw_intr_mask___cmd_rdy___lsb 3 +#define reg_iop_dmc_out_rw_intr_mask___cmd_rdy___width 1 +#define reg_iop_dmc_out_rw_intr_mask___cmd_rdy___bit 3 +#define reg_iop_dmc_out_rw_intr_mask___dth___lsb 4 +#define reg_iop_dmc_out_rw_intr_mask___dth___width 1 +#define reg_iop_dmc_out_rw_intr_mask___dth___bit 4 +#define reg_iop_dmc_out_rw_intr_mask___dv___lsb 5 +#define reg_iop_dmc_out_rw_intr_mask___dv___width 1 +#define reg_iop_dmc_out_rw_intr_mask___dv___bit 5 +#define reg_iop_dmc_out_rw_intr_mask___last_data___lsb 6 +#define reg_iop_dmc_out_rw_intr_mask___last_data___width 1 +#define reg_iop_dmc_out_rw_intr_mask___last_data___bit 6 +#define reg_iop_dmc_out_rw_intr_mask___trf_lim___lsb 7 +#define reg_iop_dmc_out_rw_intr_mask___trf_lim___width 1 +#define reg_iop_dmc_out_rw_intr_mask___trf_lim___bit 7 +#define reg_iop_dmc_out_rw_intr_mask___cmd_rq___lsb 8 +#define reg_iop_dmc_out_rw_intr_mask___cmd_rq___width 1 +#define reg_iop_dmc_out_rw_intr_mask___cmd_rq___bit 8 +#define reg_iop_dmc_out_rw_intr_mask_offset 84 + +/* Register rw_ack_intr, scope iop_dmc_out, type rw */ +#define reg_iop_dmc_out_rw_ack_intr___data_md___lsb 0 +#define reg_iop_dmc_out_rw_ack_intr___data_md___width 1 +#define reg_iop_dmc_out_rw_ack_intr___data_md___bit 0 +#define reg_iop_dmc_out_rw_ack_intr___ctxt_md___lsb 1 +#define reg_iop_dmc_out_rw_ack_intr___ctxt_md___width 1 +#define reg_iop_dmc_out_rw_ack_intr___ctxt_md___bit 1 +#define reg_iop_dmc_out_rw_ack_intr___group_md___lsb 2 +#define reg_iop_dmc_out_rw_ack_intr___group_md___width 1 +#define reg_iop_dmc_out_rw_ack_intr___group_md___bit 2 +#define reg_iop_dmc_out_rw_ack_intr___cmd_rdy___lsb 3 +#define reg_iop_dmc_out_rw_ack_intr___cmd_rdy___width 1 +#define reg_iop_dmc_out_rw_ack_intr___cmd_rdy___bit 3 +#define reg_iop_dmc_out_rw_ack_intr___dth___lsb 4 +#define reg_iop_dmc_out_rw_ack_intr___dth___width 1 +#define reg_iop_dmc_out_rw_ack_intr___dth___bit 4 +#define reg_iop_dmc_out_rw_ack_intr___dv___lsb 5 +#define reg_iop_dmc_out_rw_ack_intr___dv___width 1 +#define reg_iop_dmc_out_rw_ack_intr___dv___bit 5 +#define reg_iop_dmc_out_rw_ack_intr___last_data___lsb 6 +#define reg_iop_dmc_out_rw_ack_intr___last_data___width 1 +#define reg_iop_dmc_out_rw_ack_intr___last_data___bit 6 +#define reg_iop_dmc_out_rw_ack_intr___trf_lim___lsb 7 +#define reg_iop_dmc_out_rw_ack_intr___trf_lim___width 1 +#define reg_iop_dmc_out_rw_ack_intr___trf_lim___bit 7 +#define reg_iop_dmc_out_rw_ack_intr___cmd_rq___lsb 8 +#define reg_iop_dmc_out_rw_ack_intr___cmd_rq___width 1 +#define reg_iop_dmc_out_rw_ack_intr___cmd_rq___bit 8 +#define reg_iop_dmc_out_rw_ack_intr_offset 88 + +/* Register r_intr, scope iop_dmc_out, type r */ +#define reg_iop_dmc_out_r_intr___data_md___lsb 0 +#define reg_iop_dmc_out_r_intr___data_md___width 1 +#define reg_iop_dmc_out_r_intr___data_md___bit 0 +#define reg_iop_dmc_out_r_intr___ctxt_md___lsb 1 +#define reg_iop_dmc_out_r_intr___ctxt_md___width 1 +#define reg_iop_dmc_out_r_intr___ctxt_md___bit 1 +#define reg_iop_dmc_out_r_intr___group_md___lsb 2 +#define reg_iop_dmc_out_r_intr___group_md___width 1 +#define reg_iop_dmc_out_r_intr___group_md___bit 2 +#define reg_iop_dmc_out_r_intr___cmd_rdy___lsb 3 +#define reg_iop_dmc_out_r_intr___cmd_rdy___width 1 +#define reg_iop_dmc_out_r_intr___cmd_rdy___bit 3 +#define reg_iop_dmc_out_r_intr___dth___lsb 4 +#define reg_iop_dmc_out_r_intr___dth___width 1 +#define reg_iop_dmc_out_r_intr___dth___bit 4 +#define reg_iop_dmc_out_r_intr___dv___lsb 5 +#define reg_iop_dmc_out_r_intr___dv___width 1 +#define reg_iop_dmc_out_r_intr___dv___bit 5 +#define reg_iop_dmc_out_r_intr___last_data___lsb 6 +#define reg_iop_dmc_out_r_intr___last_data___width 1 +#define reg_iop_dmc_out_r_intr___last_data___bit 6 +#define reg_iop_dmc_out_r_intr___trf_lim___lsb 7 +#define reg_iop_dmc_out_r_intr___trf_lim___width 1 +#define reg_iop_dmc_out_r_intr___trf_lim___bit 7 +#define reg_iop_dmc_out_r_intr___cmd_rq___lsb 8 +#define reg_iop_dmc_out_r_intr___cmd_rq___width 1 +#define reg_iop_dmc_out_r_intr___cmd_rq___bit 8 +#define reg_iop_dmc_out_r_intr_offset 92 + +/* Register r_masked_intr, scope iop_dmc_out, type r */ +#define reg_iop_dmc_out_r_masked_intr___data_md___lsb 0 +#define reg_iop_dmc_out_r_masked_intr___data_md___width 1 +#define reg_iop_dmc_out_r_masked_intr___data_md___bit 0 +#define reg_iop_dmc_out_r_masked_intr___ctxt_md___lsb 1 +#define reg_iop_dmc_out_r_masked_intr___ctxt_md___width 1 +#define reg_iop_dmc_out_r_masked_intr___ctxt_md___bit 1 +#define reg_iop_dmc_out_r_masked_intr___group_md___lsb 2 +#define reg_iop_dmc_out_r_masked_intr___group_md___width 1 +#define reg_iop_dmc_out_r_masked_intr___group_md___bit 2 +#define reg_iop_dmc_out_r_masked_intr___cmd_rdy___lsb 3 +#define reg_iop_dmc_out_r_masked_intr___cmd_rdy___width 1 +#define reg_iop_dmc_out_r_masked_intr___cmd_rdy___bit 3 +#define reg_iop_dmc_out_r_masked_intr___dth___lsb 4 +#define reg_iop_dmc_out_r_masked_intr___dth___width 1 +#define reg_iop_dmc_out_r_masked_intr___dth___bit 4 +#define reg_iop_dmc_out_r_masked_intr___dv___lsb 5 +#define reg_iop_dmc_out_r_masked_intr___dv___width 1 +#define reg_iop_dmc_out_r_masked_intr___dv___bit 5 +#define reg_iop_dmc_out_r_masked_intr___last_data___lsb 6 +#define reg_iop_dmc_out_r_masked_intr___last_data___width 1 +#define reg_iop_dmc_out_r_masked_intr___last_data___bit 6 +#define reg_iop_dmc_out_r_masked_intr___trf_lim___lsb 7 +#define reg_iop_dmc_out_r_masked_intr___trf_lim___width 1 +#define reg_iop_dmc_out_r_masked_intr___trf_lim___bit 7 +#define reg_iop_dmc_out_r_masked_intr___cmd_rq___lsb 8 +#define reg_iop_dmc_out_r_masked_intr___cmd_rq___width 1 +#define reg_iop_dmc_out_r_masked_intr___cmd_rq___bit 8 +#define reg_iop_dmc_out_r_masked_intr_offset 96 + + +/* Constants */ +#define regk_iop_dmc_out_ack_pkt 0x00000100 +#define regk_iop_dmc_out_array 0x00000008 +#define regk_iop_dmc_out_burst 0x00000020 +#define regk_iop_dmc_out_copy_next 0x00000010 +#define regk_iop_dmc_out_copy_up 0x00000020 +#define regk_iop_dmc_out_dis_c 0x00000010 +#define regk_iop_dmc_out_dis_g 0x00000020 +#define regk_iop_dmc_out_lim1 0x00000000 +#define regk_iop_dmc_out_lim16 0x00000004 +#define regk_iop_dmc_out_lim2 0x00000001 +#define regk_iop_dmc_out_lim32 0x00000005 +#define regk_iop_dmc_out_lim4 0x00000002 +#define regk_iop_dmc_out_lim64 0x00000006 +#define regk_iop_dmc_out_lim8 0x00000003 +#define regk_iop_dmc_out_load_c 0x00000200 +#define regk_iop_dmc_out_load_c_n 0x00000280 +#define regk_iop_dmc_out_load_c_next 0x00000240 +#define regk_iop_dmc_out_load_d 0x00000140 +#define regk_iop_dmc_out_load_g 0x00000300 +#define regk_iop_dmc_out_load_g_down 0x000003c0 +#define regk_iop_dmc_out_load_g_next 0x00000340 +#define regk_iop_dmc_out_load_g_up 0x00000380 +#define regk_iop_dmc_out_next_en 0x00000010 +#define regk_iop_dmc_out_next_pkt 0x00000010 +#define regk_iop_dmc_out_no 0x00000000 +#define regk_iop_dmc_out_restore 0x00000020 +#define regk_iop_dmc_out_rw_cfg_default 0x00000000 +#define regk_iop_dmc_out_rw_ctxt_descr_default 0x00000000 +#define regk_iop_dmc_out_rw_ctxt_descr_md1_default 0x00000000 +#define regk_iop_dmc_out_rw_ctxt_descr_md2_default 0x00000000 +#define regk_iop_dmc_out_rw_data_descr_default 0x00000000 +#define regk_iop_dmc_out_rw_group_descr_default 0x00000000 +#define regk_iop_dmc_out_rw_intr_mask_default 0x00000000 +#define regk_iop_dmc_out_save_down 0x00000020 +#define regk_iop_dmc_out_save_up 0x00000020 +#define regk_iop_dmc_out_set_reg 0x00000050 +#define regk_iop_dmc_out_set_w_size1 0x00000190 +#define regk_iop_dmc_out_set_w_size2 0x000001a0 +#define regk_iop_dmc_out_set_w_size4 0x000001c0 +#define regk_iop_dmc_out_store_c 0x00000002 +#define regk_iop_dmc_out_store_descr 0x00000000 +#define regk_iop_dmc_out_store_g 0x00000004 +#define regk_iop_dmc_out_store_md 0x00000001 +#define regk_iop_dmc_out_update_down 0x00000020 +#define regk_iop_dmc_out_yes 0x00000001 +#endif /* __iop_dmc_out_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_in_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_in_defs_asm.h new file mode 100644 index 000000000000..974dee082f9f --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_in_defs_asm.h @@ -0,0 +1,234 @@ +#ifndef __iop_fifo_in_defs_asm_h +#define __iop_fifo_in_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_fifo_in.r + * id: + * last modfied: Mon Apr 11 16:10:07 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_in_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_in.r + * id: $Id: iop_fifo_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope iop_fifo_in, type rw */ +#define reg_iop_fifo_in_rw_cfg___avail_lim___lsb 0 +#define reg_iop_fifo_in_rw_cfg___avail_lim___width 3 +#define reg_iop_fifo_in_rw_cfg___byte_order___lsb 3 +#define reg_iop_fifo_in_rw_cfg___byte_order___width 2 +#define reg_iop_fifo_in_rw_cfg___trig___lsb 5 +#define reg_iop_fifo_in_rw_cfg___trig___width 2 +#define reg_iop_fifo_in_rw_cfg___last_dis_dif_in___lsb 7 +#define reg_iop_fifo_in_rw_cfg___last_dis_dif_in___width 1 +#define reg_iop_fifo_in_rw_cfg___last_dis_dif_in___bit 7 +#define reg_iop_fifo_in_rw_cfg___mode___lsb 8 +#define reg_iop_fifo_in_rw_cfg___mode___width 2 +#define reg_iop_fifo_in_rw_cfg_offset 0 + +/* Register rw_ctrl, scope iop_fifo_in, type rw */ +#define reg_iop_fifo_in_rw_ctrl___dif_in_en___lsb 0 +#define reg_iop_fifo_in_rw_ctrl___dif_in_en___width 1 +#define reg_iop_fifo_in_rw_ctrl___dif_in_en___bit 0 +#define reg_iop_fifo_in_rw_ctrl___dif_out_en___lsb 1 +#define reg_iop_fifo_in_rw_ctrl___dif_out_en___width 1 +#define reg_iop_fifo_in_rw_ctrl___dif_out_en___bit 1 +#define reg_iop_fifo_in_rw_ctrl_offset 4 + +/* Register r_stat, scope iop_fifo_in, type r */ +#define reg_iop_fifo_in_r_stat___avail_bytes___lsb 0 +#define reg_iop_fifo_in_r_stat___avail_bytes___width 4 +#define reg_iop_fifo_in_r_stat___last___lsb 4 +#define reg_iop_fifo_in_r_stat___last___width 8 +#define reg_iop_fifo_in_r_stat___dif_in_en___lsb 12 +#define reg_iop_fifo_in_r_stat___dif_in_en___width 1 +#define reg_iop_fifo_in_r_stat___dif_in_en___bit 12 +#define reg_iop_fifo_in_r_stat___dif_out_en___lsb 13 +#define reg_iop_fifo_in_r_stat___dif_out_en___width 1 +#define reg_iop_fifo_in_r_stat___dif_out_en___bit 13 +#define reg_iop_fifo_in_r_stat_offset 8 + +/* Register rs_rd1byte, scope iop_fifo_in, type rs */ +#define reg_iop_fifo_in_rs_rd1byte___data___lsb 0 +#define reg_iop_fifo_in_rs_rd1byte___data___width 8 +#define reg_iop_fifo_in_rs_rd1byte_offset 12 + +/* Register r_rd1byte, scope iop_fifo_in, type r */ +#define reg_iop_fifo_in_r_rd1byte___data___lsb 0 +#define reg_iop_fifo_in_r_rd1byte___data___width 8 +#define reg_iop_fifo_in_r_rd1byte_offset 16 + +/* Register rs_rd2byte, scope iop_fifo_in, type rs */ +#define reg_iop_fifo_in_rs_rd2byte___data___lsb 0 +#define reg_iop_fifo_in_rs_rd2byte___data___width 16 +#define reg_iop_fifo_in_rs_rd2byte_offset 20 + +/* Register r_rd2byte, scope iop_fifo_in, type r */ +#define reg_iop_fifo_in_r_rd2byte___data___lsb 0 +#define reg_iop_fifo_in_r_rd2byte___data___width 16 +#define reg_iop_fifo_in_r_rd2byte_offset 24 + +/* Register rs_rd3byte, scope iop_fifo_in, type rs */ +#define reg_iop_fifo_in_rs_rd3byte___data___lsb 0 +#define reg_iop_fifo_in_rs_rd3byte___data___width 24 +#define reg_iop_fifo_in_rs_rd3byte_offset 28 + +/* Register r_rd3byte, scope iop_fifo_in, type r */ +#define reg_iop_fifo_in_r_rd3byte___data___lsb 0 +#define reg_iop_fifo_in_r_rd3byte___data___width 24 +#define reg_iop_fifo_in_r_rd3byte_offset 32 + +/* Register rs_rd4byte, scope iop_fifo_in, type rs */ +#define reg_iop_fifo_in_rs_rd4byte___data___lsb 0 +#define reg_iop_fifo_in_rs_rd4byte___data___width 32 +#define reg_iop_fifo_in_rs_rd4byte_offset 36 + +/* Register r_rd4byte, scope iop_fifo_in, type r */ +#define reg_iop_fifo_in_r_rd4byte___data___lsb 0 +#define reg_iop_fifo_in_r_rd4byte___data___width 32 +#define reg_iop_fifo_in_r_rd4byte_offset 40 + +/* Register rw_set_last, scope iop_fifo_in, type rw */ +#define reg_iop_fifo_in_rw_set_last_offset 44 + +/* Register rw_strb_dif_in, scope iop_fifo_in, type rw */ +#define reg_iop_fifo_in_rw_strb_dif_in___last___lsb 0 +#define reg_iop_fifo_in_rw_strb_dif_in___last___width 2 +#define reg_iop_fifo_in_rw_strb_dif_in_offset 48 + +/* Register rw_intr_mask, scope iop_fifo_in, type rw */ +#define reg_iop_fifo_in_rw_intr_mask___urun___lsb 0 +#define reg_iop_fifo_in_rw_intr_mask___urun___width 1 +#define reg_iop_fifo_in_rw_intr_mask___urun___bit 0 +#define reg_iop_fifo_in_rw_intr_mask___last_data___lsb 1 +#define reg_iop_fifo_in_rw_intr_mask___last_data___width 1 +#define reg_iop_fifo_in_rw_intr_mask___last_data___bit 1 +#define reg_iop_fifo_in_rw_intr_mask___dav___lsb 2 +#define reg_iop_fifo_in_rw_intr_mask___dav___width 1 +#define reg_iop_fifo_in_rw_intr_mask___dav___bit 2 +#define reg_iop_fifo_in_rw_intr_mask___avail___lsb 3 +#define reg_iop_fifo_in_rw_intr_mask___avail___width 1 +#define reg_iop_fifo_in_rw_intr_mask___avail___bit 3 +#define reg_iop_fifo_in_rw_intr_mask___orun___lsb 4 +#define reg_iop_fifo_in_rw_intr_mask___orun___width 1 +#define reg_iop_fifo_in_rw_intr_mask___orun___bit 4 +#define reg_iop_fifo_in_rw_intr_mask_offset 52 + +/* Register rw_ack_intr, scope iop_fifo_in, type rw */ +#define reg_iop_fifo_in_rw_ack_intr___urun___lsb 0 +#define reg_iop_fifo_in_rw_ack_intr___urun___width 1 +#define reg_iop_fifo_in_rw_ack_intr___urun___bit 0 +#define reg_iop_fifo_in_rw_ack_intr___last_data___lsb 1 +#define reg_iop_fifo_in_rw_ack_intr___last_data___width 1 +#define reg_iop_fifo_in_rw_ack_intr___last_data___bit 1 +#define reg_iop_fifo_in_rw_ack_intr___dav___lsb 2 +#define reg_iop_fifo_in_rw_ack_intr___dav___width 1 +#define reg_iop_fifo_in_rw_ack_intr___dav___bit 2 +#define reg_iop_fifo_in_rw_ack_intr___avail___lsb 3 +#define reg_iop_fifo_in_rw_ack_intr___avail___width 1 +#define reg_iop_fifo_in_rw_ack_intr___avail___bit 3 +#define reg_iop_fifo_in_rw_ack_intr___orun___lsb 4 +#define reg_iop_fifo_in_rw_ack_intr___orun___width 1 +#define reg_iop_fifo_in_rw_ack_intr___orun___bit 4 +#define reg_iop_fifo_in_rw_ack_intr_offset 56 + +/* Register r_intr, scope iop_fifo_in, type r */ +#define reg_iop_fifo_in_r_intr___urun___lsb 0 +#define reg_iop_fifo_in_r_intr___urun___width 1 +#define reg_iop_fifo_in_r_intr___urun___bit 0 +#define reg_iop_fifo_in_r_intr___last_data___lsb 1 +#define reg_iop_fifo_in_r_intr___last_data___width 1 +#define reg_iop_fifo_in_r_intr___last_data___bit 1 +#define reg_iop_fifo_in_r_intr___dav___lsb 2 +#define reg_iop_fifo_in_r_intr___dav___width 1 +#define reg_iop_fifo_in_r_intr___dav___bit 2 +#define reg_iop_fifo_in_r_intr___avail___lsb 3 +#define reg_iop_fifo_in_r_intr___avail___width 1 +#define reg_iop_fifo_in_r_intr___avail___bit 3 +#define reg_iop_fifo_in_r_intr___orun___lsb 4 +#define reg_iop_fifo_in_r_intr___orun___width 1 +#define reg_iop_fifo_in_r_intr___orun___bit 4 +#define reg_iop_fifo_in_r_intr_offset 60 + +/* Register r_masked_intr, scope iop_fifo_in, type r */ +#define reg_iop_fifo_in_r_masked_intr___urun___lsb 0 +#define reg_iop_fifo_in_r_masked_intr___urun___width 1 +#define reg_iop_fifo_in_r_masked_intr___urun___bit 0 +#define reg_iop_fifo_in_r_masked_intr___last_data___lsb 1 +#define reg_iop_fifo_in_r_masked_intr___last_data___width 1 +#define reg_iop_fifo_in_r_masked_intr___last_data___bit 1 +#define reg_iop_fifo_in_r_masked_intr___dav___lsb 2 +#define reg_iop_fifo_in_r_masked_intr___dav___width 1 +#define reg_iop_fifo_in_r_masked_intr___dav___bit 2 +#define reg_iop_fifo_in_r_masked_intr___avail___lsb 3 +#define reg_iop_fifo_in_r_masked_intr___avail___width 1 +#define reg_iop_fifo_in_r_masked_intr___avail___bit 3 +#define reg_iop_fifo_in_r_masked_intr___orun___lsb 4 +#define reg_iop_fifo_in_r_masked_intr___orun___width 1 +#define reg_iop_fifo_in_r_masked_intr___orun___bit 4 +#define reg_iop_fifo_in_r_masked_intr_offset 64 + + +/* Constants */ +#define regk_iop_fifo_in_dif_in 0x00000002 +#define regk_iop_fifo_in_hi 0x00000000 +#define regk_iop_fifo_in_neg 0x00000002 +#define regk_iop_fifo_in_no 0x00000000 +#define regk_iop_fifo_in_order16 0x00000001 +#define regk_iop_fifo_in_order24 0x00000002 +#define regk_iop_fifo_in_order32 0x00000003 +#define regk_iop_fifo_in_order8 0x00000000 +#define regk_iop_fifo_in_pos 0x00000001 +#define regk_iop_fifo_in_pos_neg 0x00000003 +#define regk_iop_fifo_in_rw_cfg_default 0x00000024 +#define regk_iop_fifo_in_rw_ctrl_default 0x00000000 +#define regk_iop_fifo_in_rw_intr_mask_default 0x00000000 +#define regk_iop_fifo_in_rw_set_last_default 0x00000000 +#define regk_iop_fifo_in_rw_strb_dif_in_default 0x00000000 +#define regk_iop_fifo_in_size16 0x00000002 +#define regk_iop_fifo_in_size24 0x00000001 +#define regk_iop_fifo_in_size32 0x00000000 +#define regk_iop_fifo_in_size8 0x00000003 +#define regk_iop_fifo_in_yes 0x00000001 +#endif /* __iop_fifo_in_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h new file mode 100644 index 000000000000..e00fab0c9335 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h @@ -0,0 +1,155 @@ +#ifndef __iop_fifo_in_extra_defs_asm_h +#define __iop_fifo_in_extra_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_fifo_in_extra.r + * id: + * last modfied: Mon Apr 11 16:10:08 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_in_extra_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_in_extra.r + * id: $Id: iop_fifo_in_extra_defs_asm.h,v 1.1 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_wr_data, scope iop_fifo_in_extra, type rw */ +#define reg_iop_fifo_in_extra_rw_wr_data_offset 0 + +/* Register r_stat, scope iop_fifo_in_extra, type r */ +#define reg_iop_fifo_in_extra_r_stat___avail_bytes___lsb 0 +#define reg_iop_fifo_in_extra_r_stat___avail_bytes___width 4 +#define reg_iop_fifo_in_extra_r_stat___last___lsb 4 +#define reg_iop_fifo_in_extra_r_stat___last___width 8 +#define reg_iop_fifo_in_extra_r_stat___dif_in_en___lsb 12 +#define reg_iop_fifo_in_extra_r_stat___dif_in_en___width 1 +#define reg_iop_fifo_in_extra_r_stat___dif_in_en___bit 12 +#define reg_iop_fifo_in_extra_r_stat___dif_out_en___lsb 13 +#define reg_iop_fifo_in_extra_r_stat___dif_out_en___width 1 +#define reg_iop_fifo_in_extra_r_stat___dif_out_en___bit 13 +#define reg_iop_fifo_in_extra_r_stat_offset 4 + +/* Register rw_strb_dif_in, scope iop_fifo_in_extra, type rw */ +#define reg_iop_fifo_in_extra_rw_strb_dif_in___last___lsb 0 +#define reg_iop_fifo_in_extra_rw_strb_dif_in___last___width 2 +#define reg_iop_fifo_in_extra_rw_strb_dif_in_offset 8 + +/* Register rw_intr_mask, scope iop_fifo_in_extra, type rw */ +#define reg_iop_fifo_in_extra_rw_intr_mask___urun___lsb 0 +#define reg_iop_fifo_in_extra_rw_intr_mask___urun___width 1 +#define reg_iop_fifo_in_extra_rw_intr_mask___urun___bit 0 +#define reg_iop_fifo_in_extra_rw_intr_mask___last_data___lsb 1 +#define reg_iop_fifo_in_extra_rw_intr_mask___last_data___width 1 +#define reg_iop_fifo_in_extra_rw_intr_mask___last_data___bit 1 +#define reg_iop_fifo_in_extra_rw_intr_mask___dav___lsb 2 +#define reg_iop_fifo_in_extra_rw_intr_mask___dav___width 1 +#define reg_iop_fifo_in_extra_rw_intr_mask___dav___bit 2 +#define reg_iop_fifo_in_extra_rw_intr_mask___avail___lsb 3 +#define reg_iop_fifo_in_extra_rw_intr_mask___avail___width 1 +#define reg_iop_fifo_in_extra_rw_intr_mask___avail___bit 3 +#define reg_iop_fifo_in_extra_rw_intr_mask___orun___lsb 4 +#define reg_iop_fifo_in_extra_rw_intr_mask___orun___width 1 +#define reg_iop_fifo_in_extra_rw_intr_mask___orun___bit 4 +#define reg_iop_fifo_in_extra_rw_intr_mask_offset 12 + +/* Register rw_ack_intr, scope iop_fifo_in_extra, type rw */ +#define reg_iop_fifo_in_extra_rw_ack_intr___urun___lsb 0 +#define reg_iop_fifo_in_extra_rw_ack_intr___urun___width 1 +#define reg_iop_fifo_in_extra_rw_ack_intr___urun___bit 0 +#define reg_iop_fifo_in_extra_rw_ack_intr___last_data___lsb 1 +#define reg_iop_fifo_in_extra_rw_ack_intr___last_data___width 1 +#define reg_iop_fifo_in_extra_rw_ack_intr___last_data___bit 1 +#define reg_iop_fifo_in_extra_rw_ack_intr___dav___lsb 2 +#define reg_iop_fifo_in_extra_rw_ack_intr___dav___width 1 +#define reg_iop_fifo_in_extra_rw_ack_intr___dav___bit 2 +#define reg_iop_fifo_in_extra_rw_ack_intr___avail___lsb 3 +#define reg_iop_fifo_in_extra_rw_ack_intr___avail___width 1 +#define reg_iop_fifo_in_extra_rw_ack_intr___avail___bit 3 +#define reg_iop_fifo_in_extra_rw_ack_intr___orun___lsb 4 +#define reg_iop_fifo_in_extra_rw_ack_intr___orun___width 1 +#define reg_iop_fifo_in_extra_rw_ack_intr___orun___bit 4 +#define reg_iop_fifo_in_extra_rw_ack_intr_offset 16 + +/* Register r_intr, scope iop_fifo_in_extra, type r */ +#define reg_iop_fifo_in_extra_r_intr___urun___lsb 0 +#define reg_iop_fifo_in_extra_r_intr___urun___width 1 +#define reg_iop_fifo_in_extra_r_intr___urun___bit 0 +#define reg_iop_fifo_in_extra_r_intr___last_data___lsb 1 +#define reg_iop_fifo_in_extra_r_intr___last_data___width 1 +#define reg_iop_fifo_in_extra_r_intr___last_data___bit 1 +#define reg_iop_fifo_in_extra_r_intr___dav___lsb 2 +#define reg_iop_fifo_in_extra_r_intr___dav___width 1 +#define reg_iop_fifo_in_extra_r_intr___dav___bit 2 +#define reg_iop_fifo_in_extra_r_intr___avail___lsb 3 +#define reg_iop_fifo_in_extra_r_intr___avail___width 1 +#define reg_iop_fifo_in_extra_r_intr___avail___bit 3 +#define reg_iop_fifo_in_extra_r_intr___orun___lsb 4 +#define reg_iop_fifo_in_extra_r_intr___orun___width 1 +#define reg_iop_fifo_in_extra_r_intr___orun___bit 4 +#define reg_iop_fifo_in_extra_r_intr_offset 20 + +/* Register r_masked_intr, scope iop_fifo_in_extra, type r */ +#define reg_iop_fifo_in_extra_r_masked_intr___urun___lsb 0 +#define reg_iop_fifo_in_extra_r_masked_intr___urun___width 1 +#define reg_iop_fifo_in_extra_r_masked_intr___urun___bit 0 +#define reg_iop_fifo_in_extra_r_masked_intr___last_data___lsb 1 +#define reg_iop_fifo_in_extra_r_masked_intr___last_data___width 1 +#define reg_iop_fifo_in_extra_r_masked_intr___last_data___bit 1 +#define reg_iop_fifo_in_extra_r_masked_intr___dav___lsb 2 +#define reg_iop_fifo_in_extra_r_masked_intr___dav___width 1 +#define reg_iop_fifo_in_extra_r_masked_intr___dav___bit 2 +#define reg_iop_fifo_in_extra_r_masked_intr___avail___lsb 3 +#define reg_iop_fifo_in_extra_r_masked_intr___avail___width 1 +#define reg_iop_fifo_in_extra_r_masked_intr___avail___bit 3 +#define reg_iop_fifo_in_extra_r_masked_intr___orun___lsb 4 +#define reg_iop_fifo_in_extra_r_masked_intr___orun___width 1 +#define reg_iop_fifo_in_extra_r_masked_intr___orun___bit 4 +#define reg_iop_fifo_in_extra_r_masked_intr_offset 24 + + +/* Constants */ +#define regk_iop_fifo_in_extra_fifo_in 0x00000002 +#define regk_iop_fifo_in_extra_no 0x00000000 +#define regk_iop_fifo_in_extra_rw_intr_mask_default 0x00000000 +#define regk_iop_fifo_in_extra_yes 0x00000001 +#endif /* __iop_fifo_in_extra_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_out_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_out_defs_asm.h new file mode 100644 index 000000000000..9ec5f4a826df --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_out_defs_asm.h @@ -0,0 +1,254 @@ +#ifndef __iop_fifo_out_defs_asm_h +#define __iop_fifo_out_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_fifo_out.r + * id: + * last modfied: Mon Apr 11 16:10:09 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_out_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_out.r + * id: $Id: iop_fifo_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_cfg___free_lim___lsb 0 +#define reg_iop_fifo_out_rw_cfg___free_lim___width 3 +#define reg_iop_fifo_out_rw_cfg___byte_order___lsb 3 +#define reg_iop_fifo_out_rw_cfg___byte_order___width 2 +#define reg_iop_fifo_out_rw_cfg___trig___lsb 5 +#define reg_iop_fifo_out_rw_cfg___trig___width 2 +#define reg_iop_fifo_out_rw_cfg___last_dis_dif_in___lsb 7 +#define reg_iop_fifo_out_rw_cfg___last_dis_dif_in___width 1 +#define reg_iop_fifo_out_rw_cfg___last_dis_dif_in___bit 7 +#define reg_iop_fifo_out_rw_cfg___mode___lsb 8 +#define reg_iop_fifo_out_rw_cfg___mode___width 2 +#define reg_iop_fifo_out_rw_cfg___delay_out_last___lsb 10 +#define reg_iop_fifo_out_rw_cfg___delay_out_last___width 1 +#define reg_iop_fifo_out_rw_cfg___delay_out_last___bit 10 +#define reg_iop_fifo_out_rw_cfg___last_dis_dif_out___lsb 11 +#define reg_iop_fifo_out_rw_cfg___last_dis_dif_out___width 1 +#define reg_iop_fifo_out_rw_cfg___last_dis_dif_out___bit 11 +#define reg_iop_fifo_out_rw_cfg_offset 0 + +/* Register rw_ctrl, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_ctrl___dif_in_en___lsb 0 +#define reg_iop_fifo_out_rw_ctrl___dif_in_en___width 1 +#define reg_iop_fifo_out_rw_ctrl___dif_in_en___bit 0 +#define reg_iop_fifo_out_rw_ctrl___dif_out_en___lsb 1 +#define reg_iop_fifo_out_rw_ctrl___dif_out_en___width 1 +#define reg_iop_fifo_out_rw_ctrl___dif_out_en___bit 1 +#define reg_iop_fifo_out_rw_ctrl_offset 4 + +/* Register r_stat, scope iop_fifo_out, type r */ +#define reg_iop_fifo_out_r_stat___avail_bytes___lsb 0 +#define reg_iop_fifo_out_r_stat___avail_bytes___width 4 +#define reg_iop_fifo_out_r_stat___last___lsb 4 +#define reg_iop_fifo_out_r_stat___last___width 8 +#define reg_iop_fifo_out_r_stat___dif_in_en___lsb 12 +#define reg_iop_fifo_out_r_stat___dif_in_en___width 1 +#define reg_iop_fifo_out_r_stat___dif_in_en___bit 12 +#define reg_iop_fifo_out_r_stat___dif_out_en___lsb 13 +#define reg_iop_fifo_out_r_stat___dif_out_en___width 1 +#define reg_iop_fifo_out_r_stat___dif_out_en___bit 13 +#define reg_iop_fifo_out_r_stat___zero_data_last___lsb 14 +#define reg_iop_fifo_out_r_stat___zero_data_last___width 1 +#define reg_iop_fifo_out_r_stat___zero_data_last___bit 14 +#define reg_iop_fifo_out_r_stat_offset 8 + +/* Register rw_wr1byte, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_wr1byte___data___lsb 0 +#define reg_iop_fifo_out_rw_wr1byte___data___width 8 +#define reg_iop_fifo_out_rw_wr1byte_offset 12 + +/* Register rw_wr2byte, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_wr2byte___data___lsb 0 +#define reg_iop_fifo_out_rw_wr2byte___data___width 16 +#define reg_iop_fifo_out_rw_wr2byte_offset 16 + +/* Register rw_wr3byte, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_wr3byte___data___lsb 0 +#define reg_iop_fifo_out_rw_wr3byte___data___width 24 +#define reg_iop_fifo_out_rw_wr3byte_offset 20 + +/* Register rw_wr4byte, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_wr4byte___data___lsb 0 +#define reg_iop_fifo_out_rw_wr4byte___data___width 32 +#define reg_iop_fifo_out_rw_wr4byte_offset 24 + +/* Register rw_wr1byte_last, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_wr1byte_last___data___lsb 0 +#define reg_iop_fifo_out_rw_wr1byte_last___data___width 8 +#define reg_iop_fifo_out_rw_wr1byte_last_offset 28 + +/* Register rw_wr2byte_last, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_wr2byte_last___data___lsb 0 +#define reg_iop_fifo_out_rw_wr2byte_last___data___width 16 +#define reg_iop_fifo_out_rw_wr2byte_last_offset 32 + +/* Register rw_wr3byte_last, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_wr3byte_last___data___lsb 0 +#define reg_iop_fifo_out_rw_wr3byte_last___data___width 24 +#define reg_iop_fifo_out_rw_wr3byte_last_offset 36 + +/* Register rw_wr4byte_last, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_wr4byte_last___data___lsb 0 +#define reg_iop_fifo_out_rw_wr4byte_last___data___width 32 +#define reg_iop_fifo_out_rw_wr4byte_last_offset 40 + +/* Register rw_set_last, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_set_last_offset 44 + +/* Register rs_rd_data, scope iop_fifo_out, type rs */ +#define reg_iop_fifo_out_rs_rd_data_offset 48 + +/* Register r_rd_data, scope iop_fifo_out, type r */ +#define reg_iop_fifo_out_r_rd_data_offset 52 + +/* Register rw_strb_dif_out, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_strb_dif_out_offset 56 + +/* Register rw_intr_mask, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_intr_mask___urun___lsb 0 +#define reg_iop_fifo_out_rw_intr_mask___urun___width 1 +#define reg_iop_fifo_out_rw_intr_mask___urun___bit 0 +#define reg_iop_fifo_out_rw_intr_mask___last_data___lsb 1 +#define reg_iop_fifo_out_rw_intr_mask___last_data___width 1 +#define reg_iop_fifo_out_rw_intr_mask___last_data___bit 1 +#define reg_iop_fifo_out_rw_intr_mask___dav___lsb 2 +#define reg_iop_fifo_out_rw_intr_mask___dav___width 1 +#define reg_iop_fifo_out_rw_intr_mask___dav___bit 2 +#define reg_iop_fifo_out_rw_intr_mask___free___lsb 3 +#define reg_iop_fifo_out_rw_intr_mask___free___width 1 +#define reg_iop_fifo_out_rw_intr_mask___free___bit 3 +#define reg_iop_fifo_out_rw_intr_mask___orun___lsb 4 +#define reg_iop_fifo_out_rw_intr_mask___orun___width 1 +#define reg_iop_fifo_out_rw_intr_mask___orun___bit 4 +#define reg_iop_fifo_out_rw_intr_mask_offset 60 + +/* Register rw_ack_intr, scope iop_fifo_out, type rw */ +#define reg_iop_fifo_out_rw_ack_intr___urun___lsb 0 +#define reg_iop_fifo_out_rw_ack_intr___urun___width 1 +#define reg_iop_fifo_out_rw_ack_intr___urun___bit 0 +#define reg_iop_fifo_out_rw_ack_intr___last_data___lsb 1 +#define reg_iop_fifo_out_rw_ack_intr___last_data___width 1 +#define reg_iop_fifo_out_rw_ack_intr___last_data___bit 1 +#define reg_iop_fifo_out_rw_ack_intr___dav___lsb 2 +#define reg_iop_fifo_out_rw_ack_intr___dav___width 1 +#define reg_iop_fifo_out_rw_ack_intr___dav___bit 2 +#define reg_iop_fifo_out_rw_ack_intr___free___lsb 3 +#define reg_iop_fifo_out_rw_ack_intr___free___width 1 +#define reg_iop_fifo_out_rw_ack_intr___free___bit 3 +#define reg_iop_fifo_out_rw_ack_intr___orun___lsb 4 +#define reg_iop_fifo_out_rw_ack_intr___orun___width 1 +#define reg_iop_fifo_out_rw_ack_intr___orun___bit 4 +#define reg_iop_fifo_out_rw_ack_intr_offset 64 + +/* Register r_intr, scope iop_fifo_out, type r */ +#define reg_iop_fifo_out_r_intr___urun___lsb 0 +#define reg_iop_fifo_out_r_intr___urun___width 1 +#define reg_iop_fifo_out_r_intr___urun___bit 0 +#define reg_iop_fifo_out_r_intr___last_data___lsb 1 +#define reg_iop_fifo_out_r_intr___last_data___width 1 +#define reg_iop_fifo_out_r_intr___last_data___bit 1 +#define reg_iop_fifo_out_r_intr___dav___lsb 2 +#define reg_iop_fifo_out_r_intr___dav___width 1 +#define reg_iop_fifo_out_r_intr___dav___bit 2 +#define reg_iop_fifo_out_r_intr___free___lsb 3 +#define reg_iop_fifo_out_r_intr___free___width 1 +#define reg_iop_fifo_out_r_intr___free___bit 3 +#define reg_iop_fifo_out_r_intr___orun___lsb 4 +#define reg_iop_fifo_out_r_intr___orun___width 1 +#define reg_iop_fifo_out_r_intr___orun___bit 4 +#define reg_iop_fifo_out_r_intr_offset 68 + +/* Register r_masked_intr, scope iop_fifo_out, type r */ +#define reg_iop_fifo_out_r_masked_intr___urun___lsb 0 +#define reg_iop_fifo_out_r_masked_intr___urun___width 1 +#define reg_iop_fifo_out_r_masked_intr___urun___bit 0 +#define reg_iop_fifo_out_r_masked_intr___last_data___lsb 1 +#define reg_iop_fifo_out_r_masked_intr___last_data___width 1 +#define reg_iop_fifo_out_r_masked_intr___last_data___bit 1 +#define reg_iop_fifo_out_r_masked_intr___dav___lsb 2 +#define reg_iop_fifo_out_r_masked_intr___dav___width 1 +#define reg_iop_fifo_out_r_masked_intr___dav___bit 2 +#define reg_iop_fifo_out_r_masked_intr___free___lsb 3 +#define reg_iop_fifo_out_r_masked_intr___free___width 1 +#define reg_iop_fifo_out_r_masked_intr___free___bit 3 +#define reg_iop_fifo_out_r_masked_intr___orun___lsb 4 +#define reg_iop_fifo_out_r_masked_intr___orun___width 1 +#define reg_iop_fifo_out_r_masked_intr___orun___bit 4 +#define reg_iop_fifo_out_r_masked_intr_offset 72 + + +/* Constants */ +#define regk_iop_fifo_out_hi 0x00000000 +#define regk_iop_fifo_out_neg 0x00000002 +#define regk_iop_fifo_out_no 0x00000000 +#define regk_iop_fifo_out_order16 0x00000001 +#define regk_iop_fifo_out_order24 0x00000002 +#define regk_iop_fifo_out_order32 0x00000003 +#define regk_iop_fifo_out_order8 0x00000000 +#define regk_iop_fifo_out_pos 0x00000001 +#define regk_iop_fifo_out_pos_neg 0x00000003 +#define regk_iop_fifo_out_rw_cfg_default 0x00000024 +#define regk_iop_fifo_out_rw_ctrl_default 0x00000000 +#define regk_iop_fifo_out_rw_intr_mask_default 0x00000000 +#define regk_iop_fifo_out_rw_set_last_default 0x00000000 +#define regk_iop_fifo_out_rw_strb_dif_out_default 0x00000000 +#define regk_iop_fifo_out_rw_wr1byte_default 0x00000000 +#define regk_iop_fifo_out_rw_wr1byte_last_default 0x00000000 +#define regk_iop_fifo_out_rw_wr2byte_default 0x00000000 +#define regk_iop_fifo_out_rw_wr2byte_last_default 0x00000000 +#define regk_iop_fifo_out_rw_wr3byte_default 0x00000000 +#define regk_iop_fifo_out_rw_wr3byte_last_default 0x00000000 +#define regk_iop_fifo_out_rw_wr4byte_default 0x00000000 +#define regk_iop_fifo_out_rw_wr4byte_last_default 0x00000000 +#define regk_iop_fifo_out_size16 0x00000002 +#define regk_iop_fifo_out_size24 0x00000001 +#define regk_iop_fifo_out_size32 0x00000000 +#define regk_iop_fifo_out_size8 0x00000003 +#define regk_iop_fifo_out_yes 0x00000001 +#endif /* __iop_fifo_out_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h new file mode 100644 index 000000000000..0f84a50cf77c --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h @@ -0,0 +1,158 @@ +#ifndef __iop_fifo_out_extra_defs_asm_h +#define __iop_fifo_out_extra_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_fifo_out_extra.r + * id: + * last modfied: Mon Apr 11 16:10:10 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_out_extra_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_out_extra.r + * id: $Id: iop_fifo_out_extra_defs_asm.h,v 1.1 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rs_rd_data, scope iop_fifo_out_extra, type rs */ +#define reg_iop_fifo_out_extra_rs_rd_data_offset 0 + +/* Register r_rd_data, scope iop_fifo_out_extra, type r */ +#define reg_iop_fifo_out_extra_r_rd_data_offset 4 + +/* Register r_stat, scope iop_fifo_out_extra, type r */ +#define reg_iop_fifo_out_extra_r_stat___avail_bytes___lsb 0 +#define reg_iop_fifo_out_extra_r_stat___avail_bytes___width 4 +#define reg_iop_fifo_out_extra_r_stat___last___lsb 4 +#define reg_iop_fifo_out_extra_r_stat___last___width 8 +#define reg_iop_fifo_out_extra_r_stat___dif_in_en___lsb 12 +#define reg_iop_fifo_out_extra_r_stat___dif_in_en___width 1 +#define reg_iop_fifo_out_extra_r_stat___dif_in_en___bit 12 +#define reg_iop_fifo_out_extra_r_stat___dif_out_en___lsb 13 +#define reg_iop_fifo_out_extra_r_stat___dif_out_en___width 1 +#define reg_iop_fifo_out_extra_r_stat___dif_out_en___bit 13 +#define reg_iop_fifo_out_extra_r_stat___zero_data_last___lsb 14 +#define reg_iop_fifo_out_extra_r_stat___zero_data_last___width 1 +#define reg_iop_fifo_out_extra_r_stat___zero_data_last___bit 14 +#define reg_iop_fifo_out_extra_r_stat_offset 8 + +/* Register rw_strb_dif_out, scope iop_fifo_out_extra, type rw */ +#define reg_iop_fifo_out_extra_rw_strb_dif_out_offset 12 + +/* Register rw_intr_mask, scope iop_fifo_out_extra, type rw */ +#define reg_iop_fifo_out_extra_rw_intr_mask___urun___lsb 0 +#define reg_iop_fifo_out_extra_rw_intr_mask___urun___width 1 +#define reg_iop_fifo_out_extra_rw_intr_mask___urun___bit 0 +#define reg_iop_fifo_out_extra_rw_intr_mask___last_data___lsb 1 +#define reg_iop_fifo_out_extra_rw_intr_mask___last_data___width 1 +#define reg_iop_fifo_out_extra_rw_intr_mask___last_data___bit 1 +#define reg_iop_fifo_out_extra_rw_intr_mask___dav___lsb 2 +#define reg_iop_fifo_out_extra_rw_intr_mask___dav___width 1 +#define reg_iop_fifo_out_extra_rw_intr_mask___dav___bit 2 +#define reg_iop_fifo_out_extra_rw_intr_mask___free___lsb 3 +#define reg_iop_fifo_out_extra_rw_intr_mask___free___width 1 +#define reg_iop_fifo_out_extra_rw_intr_mask___free___bit 3 +#define reg_iop_fifo_out_extra_rw_intr_mask___orun___lsb 4 +#define reg_iop_fifo_out_extra_rw_intr_mask___orun___width 1 +#define reg_iop_fifo_out_extra_rw_intr_mask___orun___bit 4 +#define reg_iop_fifo_out_extra_rw_intr_mask_offset 16 + +/* Register rw_ack_intr, scope iop_fifo_out_extra, type rw */ +#define reg_iop_fifo_out_extra_rw_ack_intr___urun___lsb 0 +#define reg_iop_fifo_out_extra_rw_ack_intr___urun___width 1 +#define reg_iop_fifo_out_extra_rw_ack_intr___urun___bit 0 +#define reg_iop_fifo_out_extra_rw_ack_intr___last_data___lsb 1 +#define reg_iop_fifo_out_extra_rw_ack_intr___last_data___width 1 +#define reg_iop_fifo_out_extra_rw_ack_intr___last_data___bit 1 +#define reg_iop_fifo_out_extra_rw_ack_intr___dav___lsb 2 +#define reg_iop_fifo_out_extra_rw_ack_intr___dav___width 1 +#define reg_iop_fifo_out_extra_rw_ack_intr___dav___bit 2 +#define reg_iop_fifo_out_extra_rw_ack_intr___free___lsb 3 +#define reg_iop_fifo_out_extra_rw_ack_intr___free___width 1 +#define reg_iop_fifo_out_extra_rw_ack_intr___free___bit 3 +#define reg_iop_fifo_out_extra_rw_ack_intr___orun___lsb 4 +#define reg_iop_fifo_out_extra_rw_ack_intr___orun___width 1 +#define reg_iop_fifo_out_extra_rw_ack_intr___orun___bit 4 +#define reg_iop_fifo_out_extra_rw_ack_intr_offset 20 + +/* Register r_intr, scope iop_fifo_out_extra, type r */ +#define reg_iop_fifo_out_extra_r_intr___urun___lsb 0 +#define reg_iop_fifo_out_extra_r_intr___urun___width 1 +#define reg_iop_fifo_out_extra_r_intr___urun___bit 0 +#define reg_iop_fifo_out_extra_r_intr___last_data___lsb 1 +#define reg_iop_fifo_out_extra_r_intr___last_data___width 1 +#define reg_iop_fifo_out_extra_r_intr___last_data___bit 1 +#define reg_iop_fifo_out_extra_r_intr___dav___lsb 2 +#define reg_iop_fifo_out_extra_r_intr___dav___width 1 +#define reg_iop_fifo_out_extra_r_intr___dav___bit 2 +#define reg_iop_fifo_out_extra_r_intr___free___lsb 3 +#define reg_iop_fifo_out_extra_r_intr___free___width 1 +#define reg_iop_fifo_out_extra_r_intr___free___bit 3 +#define reg_iop_fifo_out_extra_r_intr___orun___lsb 4 +#define reg_iop_fifo_out_extra_r_intr___orun___width 1 +#define reg_iop_fifo_out_extra_r_intr___orun___bit 4 +#define reg_iop_fifo_out_extra_r_intr_offset 24 + +/* Register r_masked_intr, scope iop_fifo_out_extra, type r */ +#define reg_iop_fifo_out_extra_r_masked_intr___urun___lsb 0 +#define reg_iop_fifo_out_extra_r_masked_intr___urun___width 1 +#define reg_iop_fifo_out_extra_r_masked_intr___urun___bit 0 +#define reg_iop_fifo_out_extra_r_masked_intr___last_data___lsb 1 +#define reg_iop_fifo_out_extra_r_masked_intr___last_data___width 1 +#define reg_iop_fifo_out_extra_r_masked_intr___last_data___bit 1 +#define reg_iop_fifo_out_extra_r_masked_intr___dav___lsb 2 +#define reg_iop_fifo_out_extra_r_masked_intr___dav___width 1 +#define reg_iop_fifo_out_extra_r_masked_intr___dav___bit 2 +#define reg_iop_fifo_out_extra_r_masked_intr___free___lsb 3 +#define reg_iop_fifo_out_extra_r_masked_intr___free___width 1 +#define reg_iop_fifo_out_extra_r_masked_intr___free___bit 3 +#define reg_iop_fifo_out_extra_r_masked_intr___orun___lsb 4 +#define reg_iop_fifo_out_extra_r_masked_intr___orun___width 1 +#define reg_iop_fifo_out_extra_r_masked_intr___orun___bit 4 +#define reg_iop_fifo_out_extra_r_masked_intr_offset 28 + + +/* Constants */ +#define regk_iop_fifo_out_extra_no 0x00000000 +#define regk_iop_fifo_out_extra_rw_intr_mask_default 0x00000000 +#define regk_iop_fifo_out_extra_yes 0x00000001 +#endif /* __iop_fifo_out_extra_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_mpu_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_mpu_defs_asm.h new file mode 100644 index 000000000000..80490c82cc29 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_mpu_defs_asm.h @@ -0,0 +1,177 @@ +#ifndef __iop_mpu_defs_asm_h +#define __iop_mpu_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_mpu.r + * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_mpu_defs_asm.h ../../inst/io_proc/rtl/iop_mpu.r + * id: $Id: iop_mpu_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +#define STRIDE_iop_mpu_rw_r 4 +/* Register rw_r, scope iop_mpu, type rw */ +#define reg_iop_mpu_rw_r_offset 0 + +/* Register rw_ctrl, scope iop_mpu, type rw */ +#define reg_iop_mpu_rw_ctrl___en___lsb 0 +#define reg_iop_mpu_rw_ctrl___en___width 1 +#define reg_iop_mpu_rw_ctrl___en___bit 0 +#define reg_iop_mpu_rw_ctrl_offset 128 + +/* Register r_pc, scope iop_mpu, type r */ +#define reg_iop_mpu_r_pc___addr___lsb 0 +#define reg_iop_mpu_r_pc___addr___width 12 +#define reg_iop_mpu_r_pc_offset 132 + +/* Register r_stat, scope iop_mpu, type r */ +#define reg_iop_mpu_r_stat___instr_reg_busy___lsb 0 +#define reg_iop_mpu_r_stat___instr_reg_busy___width 1 +#define reg_iop_mpu_r_stat___instr_reg_busy___bit 0 +#define reg_iop_mpu_r_stat___intr_busy___lsb 1 +#define reg_iop_mpu_r_stat___intr_busy___width 1 +#define reg_iop_mpu_r_stat___intr_busy___bit 1 +#define reg_iop_mpu_r_stat___intr_vect___lsb 2 +#define reg_iop_mpu_r_stat___intr_vect___width 16 +#define reg_iop_mpu_r_stat_offset 136 + +/* Register rw_instr, scope iop_mpu, type rw */ +#define reg_iop_mpu_rw_instr_offset 140 + +/* Register rw_immediate, scope iop_mpu, type rw */ +#define reg_iop_mpu_rw_immediate_offset 144 + +/* Register r_trace, scope iop_mpu, type r */ +#define reg_iop_mpu_r_trace___intr_vect___lsb 0 +#define reg_iop_mpu_r_trace___intr_vect___width 16 +#define reg_iop_mpu_r_trace___pc___lsb 16 +#define reg_iop_mpu_r_trace___pc___width 12 +#define reg_iop_mpu_r_trace___en___lsb 28 +#define reg_iop_mpu_r_trace___en___width 1 +#define reg_iop_mpu_r_trace___en___bit 28 +#define reg_iop_mpu_r_trace___instr_reg_busy___lsb 29 +#define reg_iop_mpu_r_trace___instr_reg_busy___width 1 +#define reg_iop_mpu_r_trace___instr_reg_busy___bit 29 +#define reg_iop_mpu_r_trace___intr_busy___lsb 30 +#define reg_iop_mpu_r_trace___intr_busy___width 1 +#define reg_iop_mpu_r_trace___intr_busy___bit 30 +#define reg_iop_mpu_r_trace_offset 148 + +/* Register r_wr_stat, scope iop_mpu, type r */ +#define reg_iop_mpu_r_wr_stat___r0___lsb 0 +#define reg_iop_mpu_r_wr_stat___r0___width 1 +#define reg_iop_mpu_r_wr_stat___r0___bit 0 +#define reg_iop_mpu_r_wr_stat___r1___lsb 1 +#define reg_iop_mpu_r_wr_stat___r1___width 1 +#define reg_iop_mpu_r_wr_stat___r1___bit 1 +#define reg_iop_mpu_r_wr_stat___r2___lsb 2 +#define reg_iop_mpu_r_wr_stat___r2___width 1 +#define reg_iop_mpu_r_wr_stat___r2___bit 2 +#define reg_iop_mpu_r_wr_stat___r3___lsb 3 +#define reg_iop_mpu_r_wr_stat___r3___width 1 +#define reg_iop_mpu_r_wr_stat___r3___bit 3 +#define reg_iop_mpu_r_wr_stat___r4___lsb 4 +#define reg_iop_mpu_r_wr_stat___r4___width 1 +#define reg_iop_mpu_r_wr_stat___r4___bit 4 +#define reg_iop_mpu_r_wr_stat___r5___lsb 5 +#define reg_iop_mpu_r_wr_stat___r5___width 1 +#define reg_iop_mpu_r_wr_stat___r5___bit 5 +#define reg_iop_mpu_r_wr_stat___r6___lsb 6 +#define reg_iop_mpu_r_wr_stat___r6___width 1 +#define reg_iop_mpu_r_wr_stat___r6___bit 6 +#define reg_iop_mpu_r_wr_stat___r7___lsb 7 +#define reg_iop_mpu_r_wr_stat___r7___width 1 +#define reg_iop_mpu_r_wr_stat___r7___bit 7 +#define reg_iop_mpu_r_wr_stat___r8___lsb 8 +#define reg_iop_mpu_r_wr_stat___r8___width 1 +#define reg_iop_mpu_r_wr_stat___r8___bit 8 +#define reg_iop_mpu_r_wr_stat___r9___lsb 9 +#define reg_iop_mpu_r_wr_stat___r9___width 1 +#define reg_iop_mpu_r_wr_stat___r9___bit 9 +#define reg_iop_mpu_r_wr_stat___r10___lsb 10 +#define reg_iop_mpu_r_wr_stat___r10___width 1 +#define reg_iop_mpu_r_wr_stat___r10___bit 10 +#define reg_iop_mpu_r_wr_stat___r11___lsb 11 +#define reg_iop_mpu_r_wr_stat___r11___width 1 +#define reg_iop_mpu_r_wr_stat___r11___bit 11 +#define reg_iop_mpu_r_wr_stat___r12___lsb 12 +#define reg_iop_mpu_r_wr_stat___r12___width 1 +#define reg_iop_mpu_r_wr_stat___r12___bit 12 +#define reg_iop_mpu_r_wr_stat___r13___lsb 13 +#define reg_iop_mpu_r_wr_stat___r13___width 1 +#define reg_iop_mpu_r_wr_stat___r13___bit 13 +#define reg_iop_mpu_r_wr_stat___r14___lsb 14 +#define reg_iop_mpu_r_wr_stat___r14___width 1 +#define reg_iop_mpu_r_wr_stat___r14___bit 14 +#define reg_iop_mpu_r_wr_stat___r15___lsb 15 +#define reg_iop_mpu_r_wr_stat___r15___width 1 +#define reg_iop_mpu_r_wr_stat___r15___bit 15 +#define reg_iop_mpu_r_wr_stat_offset 152 + +#define STRIDE_iop_mpu_rw_thread 4 +/* Register rw_thread, scope iop_mpu, type rw */ +#define reg_iop_mpu_rw_thread___addr___lsb 0 +#define reg_iop_mpu_rw_thread___addr___width 12 +#define reg_iop_mpu_rw_thread_offset 156 + +#define STRIDE_iop_mpu_rw_intr 4 +/* Register rw_intr, scope iop_mpu, type rw */ +#define reg_iop_mpu_rw_intr___addr___lsb 0 +#define reg_iop_mpu_rw_intr___addr___width 12 +#define reg_iop_mpu_rw_intr_offset 196 + + +/* Constants */ +#define regk_iop_mpu_no 0x00000000 +#define regk_iop_mpu_r_pc_default 0x00000000 +#define regk_iop_mpu_rw_ctrl_default 0x00000000 +#define regk_iop_mpu_rw_intr_size 0x00000010 +#define regk_iop_mpu_rw_r_size 0x00000010 +#define regk_iop_mpu_rw_thread_default 0x00000000 +#define regk_iop_mpu_rw_thread_size 0x00000004 +#define regk_iop_mpu_yes 0x00000001 +#endif /* __iop_mpu_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_reg_space_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_reg_space_asm.h new file mode 100644 index 000000000000..a20b8857b4d0 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_reg_space_asm.h @@ -0,0 +1,44 @@ +/* Autogenerated Changes here will be lost! + * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg + */ +#define iop_version 0 +#define iop_fifo_in0_extra 64 +#define iop_fifo_in1_extra 128 +#define iop_fifo_out0_extra 192 +#define iop_fifo_out1_extra 256 +#define iop_trigger_grp0 320 +#define iop_trigger_grp1 384 +#define iop_trigger_grp2 448 +#define iop_trigger_grp3 512 +#define iop_trigger_grp4 576 +#define iop_trigger_grp5 640 +#define iop_trigger_grp6 704 +#define iop_trigger_grp7 768 +#define iop_crc_par0 896 +#define iop_crc_par1 1024 +#define iop_dmc_in0 1152 +#define iop_dmc_in1 1280 +#define iop_dmc_out0 1408 +#define iop_dmc_out1 1536 +#define iop_fifo_in0 1664 +#define iop_fifo_in1 1792 +#define iop_fifo_out0 1920 +#define iop_fifo_out1 2048 +#define iop_scrc_in0 2176 +#define iop_scrc_in1 2304 +#define iop_scrc_out0 2432 +#define iop_scrc_out1 2560 +#define iop_timer_grp0 2688 +#define iop_timer_grp1 2816 +#define iop_timer_grp2 2944 +#define iop_timer_grp3 3072 +#define iop_sap_in 3328 +#define iop_sap_out 3584 +#define iop_spu0 3840 +#define iop_spu1 4096 +#define iop_sw_cfg 4352 +#define iop_sw_cpu 4608 +#define iop_sw_mpu 4864 +#define iop_sw_spu0 5120 +#define iop_sw_spu1 5376 +#define iop_mpu 5632 diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sap_in_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sap_in_defs_asm.h new file mode 100644 index 000000000000..a4a10ff300b3 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sap_in_defs_asm.h @@ -0,0 +1,182 @@ +#ifndef __iop_sap_in_defs_asm_h +#define __iop_sap_in_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_sap_in.r + * id: + * last modfied: Mon Apr 11 16:08:45 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sap_in_defs_asm.h ../../inst/io_proc/rtl/iop_sap_in.r + * id: $Id: iop_sap_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_bus0_sync, scope iop_sap_in, type rw */ +#define reg_iop_sap_in_rw_bus0_sync___byte0_sel___lsb 0 +#define reg_iop_sap_in_rw_bus0_sync___byte0_sel___width 2 +#define reg_iop_sap_in_rw_bus0_sync___byte0_ext_src___lsb 2 +#define reg_iop_sap_in_rw_bus0_sync___byte0_ext_src___width 3 +#define reg_iop_sap_in_rw_bus0_sync___byte0_edge___lsb 5 +#define reg_iop_sap_in_rw_bus0_sync___byte0_edge___width 2 +#define reg_iop_sap_in_rw_bus0_sync___byte0_delay___lsb 7 +#define reg_iop_sap_in_rw_bus0_sync___byte0_delay___width 1 +#define reg_iop_sap_in_rw_bus0_sync___byte0_delay___bit 7 +#define reg_iop_sap_in_rw_bus0_sync___byte1_sel___lsb 8 +#define reg_iop_sap_in_rw_bus0_sync___byte1_sel___width 2 +#define reg_iop_sap_in_rw_bus0_sync___byte1_ext_src___lsb 10 +#define reg_iop_sap_in_rw_bus0_sync___byte1_ext_src___width 3 +#define reg_iop_sap_in_rw_bus0_sync___byte1_edge___lsb 13 +#define reg_iop_sap_in_rw_bus0_sync___byte1_edge___width 2 +#define reg_iop_sap_in_rw_bus0_sync___byte1_delay___lsb 15 +#define reg_iop_sap_in_rw_bus0_sync___byte1_delay___width 1 +#define reg_iop_sap_in_rw_bus0_sync___byte1_delay___bit 15 +#define reg_iop_sap_in_rw_bus0_sync___byte2_sel___lsb 16 +#define reg_iop_sap_in_rw_bus0_sync___byte2_sel___width 2 +#define reg_iop_sap_in_rw_bus0_sync___byte2_ext_src___lsb 18 +#define reg_iop_sap_in_rw_bus0_sync___byte2_ext_src___width 3 +#define reg_iop_sap_in_rw_bus0_sync___byte2_edge___lsb 21 +#define reg_iop_sap_in_rw_bus0_sync___byte2_edge___width 2 +#define reg_iop_sap_in_rw_bus0_sync___byte2_delay___lsb 23 +#define reg_iop_sap_in_rw_bus0_sync___byte2_delay___width 1 +#define reg_iop_sap_in_rw_bus0_sync___byte2_delay___bit 23 +#define reg_iop_sap_in_rw_bus0_sync___byte3_sel___lsb 24 +#define reg_iop_sap_in_rw_bus0_sync___byte3_sel___width 2 +#define reg_iop_sap_in_rw_bus0_sync___byte3_ext_src___lsb 26 +#define reg_iop_sap_in_rw_bus0_sync___byte3_ext_src___width 3 +#define reg_iop_sap_in_rw_bus0_sync___byte3_edge___lsb 29 +#define reg_iop_sap_in_rw_bus0_sync___byte3_edge___width 2 +#define reg_iop_sap_in_rw_bus0_sync___byte3_delay___lsb 31 +#define reg_iop_sap_in_rw_bus0_sync___byte3_delay___width 1 +#define reg_iop_sap_in_rw_bus0_sync___byte3_delay___bit 31 +#define reg_iop_sap_in_rw_bus0_sync_offset 0 + +/* Register rw_bus1_sync, scope iop_sap_in, type rw */ +#define reg_iop_sap_in_rw_bus1_sync___byte0_sel___lsb 0 +#define reg_iop_sap_in_rw_bus1_sync___byte0_sel___width 2 +#define reg_iop_sap_in_rw_bus1_sync___byte0_ext_src___lsb 2 +#define reg_iop_sap_in_rw_bus1_sync___byte0_ext_src___width 3 +#define reg_iop_sap_in_rw_bus1_sync___byte0_edge___lsb 5 +#define reg_iop_sap_in_rw_bus1_sync___byte0_edge___width 2 +#define reg_iop_sap_in_rw_bus1_sync___byte0_delay___lsb 7 +#define reg_iop_sap_in_rw_bus1_sync___byte0_delay___width 1 +#define reg_iop_sap_in_rw_bus1_sync___byte0_delay___bit 7 +#define reg_iop_sap_in_rw_bus1_sync___byte1_sel___lsb 8 +#define reg_iop_sap_in_rw_bus1_sync___byte1_sel___width 2 +#define reg_iop_sap_in_rw_bus1_sync___byte1_ext_src___lsb 10 +#define reg_iop_sap_in_rw_bus1_sync___byte1_ext_src___width 3 +#define reg_iop_sap_in_rw_bus1_sync___byte1_edge___lsb 13 +#define reg_iop_sap_in_rw_bus1_sync___byte1_edge___width 2 +#define reg_iop_sap_in_rw_bus1_sync___byte1_delay___lsb 15 +#define reg_iop_sap_in_rw_bus1_sync___byte1_delay___width 1 +#define reg_iop_sap_in_rw_bus1_sync___byte1_delay___bit 15 +#define reg_iop_sap_in_rw_bus1_sync___byte2_sel___lsb 16 +#define reg_iop_sap_in_rw_bus1_sync___byte2_sel___width 2 +#define reg_iop_sap_in_rw_bus1_sync___byte2_ext_src___lsb 18 +#define reg_iop_sap_in_rw_bus1_sync___byte2_ext_src___width 3 +#define reg_iop_sap_in_rw_bus1_sync___byte2_edge___lsb 21 +#define reg_iop_sap_in_rw_bus1_sync___byte2_edge___width 2 +#define reg_iop_sap_in_rw_bus1_sync___byte2_delay___lsb 23 +#define reg_iop_sap_in_rw_bus1_sync___byte2_delay___width 1 +#define reg_iop_sap_in_rw_bus1_sync___byte2_delay___bit 23 +#define reg_iop_sap_in_rw_bus1_sync___byte3_sel___lsb 24 +#define reg_iop_sap_in_rw_bus1_sync___byte3_sel___width 2 +#define reg_iop_sap_in_rw_bus1_sync___byte3_ext_src___lsb 26 +#define reg_iop_sap_in_rw_bus1_sync___byte3_ext_src___width 3 +#define reg_iop_sap_in_rw_bus1_sync___byte3_edge___lsb 29 +#define reg_iop_sap_in_rw_bus1_sync___byte3_edge___width 2 +#define reg_iop_sap_in_rw_bus1_sync___byte3_delay___lsb 31 +#define reg_iop_sap_in_rw_bus1_sync___byte3_delay___width 1 +#define reg_iop_sap_in_rw_bus1_sync___byte3_delay___bit 31 +#define reg_iop_sap_in_rw_bus1_sync_offset 4 + +#define STRIDE_iop_sap_in_rw_gio 4 +/* Register rw_gio, scope iop_sap_in, type rw */ +#define reg_iop_sap_in_rw_gio___sync_sel___lsb 0 +#define reg_iop_sap_in_rw_gio___sync_sel___width 2 +#define reg_iop_sap_in_rw_gio___sync_ext_src___lsb 2 +#define reg_iop_sap_in_rw_gio___sync_ext_src___width 3 +#define reg_iop_sap_in_rw_gio___sync_edge___lsb 5 +#define reg_iop_sap_in_rw_gio___sync_edge___width 2 +#define reg_iop_sap_in_rw_gio___delay___lsb 7 +#define reg_iop_sap_in_rw_gio___delay___width 1 +#define reg_iop_sap_in_rw_gio___delay___bit 7 +#define reg_iop_sap_in_rw_gio___logic___lsb 8 +#define reg_iop_sap_in_rw_gio___logic___width 2 +#define reg_iop_sap_in_rw_gio_offset 8 + + +/* Constants */ +#define regk_iop_sap_in_and 0x00000002 +#define regk_iop_sap_in_ext_clk200 0x00000003 +#define regk_iop_sap_in_gio1 0x00000000 +#define regk_iop_sap_in_gio13 0x00000005 +#define regk_iop_sap_in_gio18 0x00000003 +#define regk_iop_sap_in_gio19 0x00000004 +#define regk_iop_sap_in_gio21 0x00000006 +#define regk_iop_sap_in_gio23 0x00000005 +#define regk_iop_sap_in_gio29 0x00000007 +#define regk_iop_sap_in_gio5 0x00000004 +#define regk_iop_sap_in_gio6 0x00000001 +#define regk_iop_sap_in_gio7 0x00000002 +#define regk_iop_sap_in_inv 0x00000001 +#define regk_iop_sap_in_neg 0x00000002 +#define regk_iop_sap_in_no 0x00000000 +#define regk_iop_sap_in_no_del_ext_clk200 0x00000001 +#define regk_iop_sap_in_none 0x00000000 +#define regk_iop_sap_in_or 0x00000003 +#define regk_iop_sap_in_pos 0x00000001 +#define regk_iop_sap_in_pos_neg 0x00000003 +#define regk_iop_sap_in_rw_bus0_sync_default 0x02020202 +#define regk_iop_sap_in_rw_bus1_sync_default 0x02020202 +#define regk_iop_sap_in_rw_gio_default 0x00000002 +#define regk_iop_sap_in_rw_gio_size 0x00000020 +#define regk_iop_sap_in_timer_grp0_tmr3 0x00000006 +#define regk_iop_sap_in_timer_grp1_tmr3 0x00000004 +#define regk_iop_sap_in_timer_grp2_tmr3 0x00000005 +#define regk_iop_sap_in_timer_grp3_tmr3 0x00000007 +#define regk_iop_sap_in_tmr_clk200 0x00000000 +#define regk_iop_sap_in_two_clk200 0x00000002 +#define regk_iop_sap_in_yes 0x00000001 +#endif /* __iop_sap_in_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sap_out_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sap_out_defs_asm.h new file mode 100644 index 000000000000..0ec727f92a25 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sap_out_defs_asm.h @@ -0,0 +1,346 @@ +#ifndef __iop_sap_out_defs_asm_h +#define __iop_sap_out_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_sap_out.r + * id: + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sap_out_defs_asm.h ../../inst/io_proc/rtl/iop_sap_out.r + * id: $Id: iop_sap_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_gen_gated, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_gen_gated___clk0_src___lsb 0 +#define reg_iop_sap_out_rw_gen_gated___clk0_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk0_gate_src___lsb 2 +#define reg_iop_sap_out_rw_gen_gated___clk0_gate_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk0_force_src___lsb 4 +#define reg_iop_sap_out_rw_gen_gated___clk0_force_src___width 3 +#define reg_iop_sap_out_rw_gen_gated___clk1_src___lsb 7 +#define reg_iop_sap_out_rw_gen_gated___clk1_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk1_gate_src___lsb 9 +#define reg_iop_sap_out_rw_gen_gated___clk1_gate_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk1_force_src___lsb 11 +#define reg_iop_sap_out_rw_gen_gated___clk1_force_src___width 3 +#define reg_iop_sap_out_rw_gen_gated___clk2_src___lsb 14 +#define reg_iop_sap_out_rw_gen_gated___clk2_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk2_gate_src___lsb 16 +#define reg_iop_sap_out_rw_gen_gated___clk2_gate_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk2_force_src___lsb 18 +#define reg_iop_sap_out_rw_gen_gated___clk2_force_src___width 3 +#define reg_iop_sap_out_rw_gen_gated___clk3_src___lsb 21 +#define reg_iop_sap_out_rw_gen_gated___clk3_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk3_gate_src___lsb 23 +#define reg_iop_sap_out_rw_gen_gated___clk3_gate_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk3_force_src___lsb 25 +#define reg_iop_sap_out_rw_gen_gated___clk3_force_src___width 3 +#define reg_iop_sap_out_rw_gen_gated_offset 0 + +/* Register rw_bus0, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus0___byte0_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus0___byte0_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus0___byte0_gated_clk___lsb 3 +#define reg_iop_sap_out_rw_bus0___byte0_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus0___byte0_clk_inv___lsb 5 +#define reg_iop_sap_out_rw_bus0___byte0_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus0___byte0_clk_inv___bit 5 +#define reg_iop_sap_out_rw_bus0___byte1_clk_sel___lsb 6 +#define reg_iop_sap_out_rw_bus0___byte1_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus0___byte1_gated_clk___lsb 9 +#define reg_iop_sap_out_rw_bus0___byte1_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus0___byte1_clk_inv___lsb 11 +#define reg_iop_sap_out_rw_bus0___byte1_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus0___byte1_clk_inv___bit 11 +#define reg_iop_sap_out_rw_bus0___byte2_clk_sel___lsb 12 +#define reg_iop_sap_out_rw_bus0___byte2_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus0___byte2_gated_clk___lsb 15 +#define reg_iop_sap_out_rw_bus0___byte2_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus0___byte2_clk_inv___lsb 17 +#define reg_iop_sap_out_rw_bus0___byte2_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus0___byte2_clk_inv___bit 17 +#define reg_iop_sap_out_rw_bus0___byte3_clk_sel___lsb 18 +#define reg_iop_sap_out_rw_bus0___byte3_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus0___byte3_gated_clk___lsb 21 +#define reg_iop_sap_out_rw_bus0___byte3_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus0___byte3_clk_inv___lsb 23 +#define reg_iop_sap_out_rw_bus0___byte3_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus0___byte3_clk_inv___bit 23 +#define reg_iop_sap_out_rw_bus0_offset 4 + +/* Register rw_bus1, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus1___byte0_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus1___byte0_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus1___byte0_gated_clk___lsb 3 +#define reg_iop_sap_out_rw_bus1___byte0_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus1___byte0_clk_inv___lsb 5 +#define reg_iop_sap_out_rw_bus1___byte0_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus1___byte0_clk_inv___bit 5 +#define reg_iop_sap_out_rw_bus1___byte1_clk_sel___lsb 6 +#define reg_iop_sap_out_rw_bus1___byte1_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus1___byte1_gated_clk___lsb 9 +#define reg_iop_sap_out_rw_bus1___byte1_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus1___byte1_clk_inv___lsb 11 +#define reg_iop_sap_out_rw_bus1___byte1_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus1___byte1_clk_inv___bit 11 +#define reg_iop_sap_out_rw_bus1___byte2_clk_sel___lsb 12 +#define reg_iop_sap_out_rw_bus1___byte2_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus1___byte2_gated_clk___lsb 15 +#define reg_iop_sap_out_rw_bus1___byte2_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus1___byte2_clk_inv___lsb 17 +#define reg_iop_sap_out_rw_bus1___byte2_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus1___byte2_clk_inv___bit 17 +#define reg_iop_sap_out_rw_bus1___byte3_clk_sel___lsb 18 +#define reg_iop_sap_out_rw_bus1___byte3_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus1___byte3_gated_clk___lsb 21 +#define reg_iop_sap_out_rw_bus1___byte3_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus1___byte3_clk_inv___lsb 23 +#define reg_iop_sap_out_rw_bus1___byte3_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus1___byte3_clk_inv___bit 23 +#define reg_iop_sap_out_rw_bus1_offset 8 + +/* Register rw_bus0_lo_oe, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_ext___lsb 3 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_ext___width 3 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_gated_clk___lsb 6 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_inv___lsb 8 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_inv___bit 8 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_logic___lsb 9 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_logic___width 2 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_sel___lsb 11 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_ext___lsb 14 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_ext___width 3 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_gated_clk___lsb 17 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_inv___lsb 19 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_inv___bit 19 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_logic___lsb 20 +#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_logic___width 2 +#define reg_iop_sap_out_rw_bus0_lo_oe_offset 12 + +/* Register rw_bus0_hi_oe, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_ext___lsb 3 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_ext___width 3 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_gated_clk___lsb 6 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_inv___lsb 8 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_inv___bit 8 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_logic___lsb 9 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_logic___width 2 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_sel___lsb 11 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_ext___lsb 14 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_ext___width 3 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_gated_clk___lsb 17 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_inv___lsb 19 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_inv___bit 19 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_logic___lsb 20 +#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_logic___width 2 +#define reg_iop_sap_out_rw_bus0_hi_oe_offset 16 + +/* Register rw_bus1_lo_oe, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_ext___lsb 3 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_ext___width 3 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_gated_clk___lsb 6 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_inv___lsb 8 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_inv___bit 8 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_logic___lsb 9 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_logic___width 2 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_sel___lsb 11 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_ext___lsb 14 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_ext___width 3 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_gated_clk___lsb 17 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_inv___lsb 19 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_inv___bit 19 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_logic___lsb 20 +#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_logic___width 2 +#define reg_iop_sap_out_rw_bus1_lo_oe_offset 20 + +/* Register rw_bus1_hi_oe, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_ext___lsb 3 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_ext___width 3 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_gated_clk___lsb 6 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_inv___lsb 8 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_inv___bit 8 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_logic___lsb 9 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_logic___width 2 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_sel___lsb 11 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_sel___width 3 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_ext___lsb 14 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_ext___width 3 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_gated_clk___lsb 17 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_gated_clk___width 2 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_inv___lsb 19 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_inv___bit 19 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_logic___lsb 20 +#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_logic___width 2 +#define reg_iop_sap_out_rw_bus1_hi_oe_offset 24 + +#define STRIDE_iop_sap_out_rw_gio 4 +/* Register rw_gio, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_gio___out_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_gio___out_clk_sel___width 3 +#define reg_iop_sap_out_rw_gio___out_clk_ext___lsb 3 +#define reg_iop_sap_out_rw_gio___out_clk_ext___width 4 +#define reg_iop_sap_out_rw_gio___out_gated_clk___lsb 7 +#define reg_iop_sap_out_rw_gio___out_gated_clk___width 2 +#define reg_iop_sap_out_rw_gio___out_clk_inv___lsb 9 +#define reg_iop_sap_out_rw_gio___out_clk_inv___width 1 +#define reg_iop_sap_out_rw_gio___out_clk_inv___bit 9 +#define reg_iop_sap_out_rw_gio___out_logic___lsb 10 +#define reg_iop_sap_out_rw_gio___out_logic___width 1 +#define reg_iop_sap_out_rw_gio___out_logic___bit 10 +#define reg_iop_sap_out_rw_gio___oe_clk_sel___lsb 11 +#define reg_iop_sap_out_rw_gio___oe_clk_sel___width 3 +#define reg_iop_sap_out_rw_gio___oe_clk_ext___lsb 14 +#define reg_iop_sap_out_rw_gio___oe_clk_ext___width 3 +#define reg_iop_sap_out_rw_gio___oe_gated_clk___lsb 17 +#define reg_iop_sap_out_rw_gio___oe_gated_clk___width 2 +#define reg_iop_sap_out_rw_gio___oe_clk_inv___lsb 19 +#define reg_iop_sap_out_rw_gio___oe_clk_inv___width 1 +#define reg_iop_sap_out_rw_gio___oe_clk_inv___bit 19 +#define reg_iop_sap_out_rw_gio___oe_logic___lsb 20 +#define reg_iop_sap_out_rw_gio___oe_logic___width 2 +#define reg_iop_sap_out_rw_gio_offset 28 + + +/* Constants */ +#define regk_iop_sap_out_and 0x00000002 +#define regk_iop_sap_out_clk0 0x00000000 +#define regk_iop_sap_out_clk1 0x00000001 +#define regk_iop_sap_out_clk12 0x00000002 +#define regk_iop_sap_out_clk2 0x00000002 +#define regk_iop_sap_out_clk200 0x00000001 +#define regk_iop_sap_out_clk3 0x00000003 +#define regk_iop_sap_out_ext 0x00000003 +#define regk_iop_sap_out_gated 0x00000004 +#define regk_iop_sap_out_gio1 0x00000000 +#define regk_iop_sap_out_gio13 0x00000002 +#define regk_iop_sap_out_gio13_clk 0x0000000c +#define regk_iop_sap_out_gio15 0x00000001 +#define regk_iop_sap_out_gio18 0x00000003 +#define regk_iop_sap_out_gio18_clk 0x0000000d +#define regk_iop_sap_out_gio1_clk 0x00000008 +#define regk_iop_sap_out_gio21_clk 0x0000000e +#define regk_iop_sap_out_gio23 0x00000002 +#define regk_iop_sap_out_gio29_clk 0x0000000f +#define regk_iop_sap_out_gio31 0x00000003 +#define regk_iop_sap_out_gio5 0x00000001 +#define regk_iop_sap_out_gio5_clk 0x00000009 +#define regk_iop_sap_out_gio6_clk 0x0000000a +#define regk_iop_sap_out_gio7 0x00000000 +#define regk_iop_sap_out_gio7_clk 0x0000000b +#define regk_iop_sap_out_gio_in13 0x00000001 +#define regk_iop_sap_out_gio_in21 0x00000002 +#define regk_iop_sap_out_gio_in29 0x00000003 +#define regk_iop_sap_out_gio_in5 0x00000000 +#define regk_iop_sap_out_inv 0x00000001 +#define regk_iop_sap_out_nand 0x00000003 +#define regk_iop_sap_out_no 0x00000000 +#define regk_iop_sap_out_none 0x00000000 +#define regk_iop_sap_out_rw_bus0_default 0x00000000 +#define regk_iop_sap_out_rw_bus0_hi_oe_default 0x00000000 +#define regk_iop_sap_out_rw_bus0_lo_oe_default 0x00000000 +#define regk_iop_sap_out_rw_bus1_default 0x00000000 +#define regk_iop_sap_out_rw_bus1_hi_oe_default 0x00000000 +#define regk_iop_sap_out_rw_bus1_lo_oe_default 0x00000000 +#define regk_iop_sap_out_rw_gen_gated_default 0x00000000 +#define regk_iop_sap_out_rw_gio_default 0x00000000 +#define regk_iop_sap_out_rw_gio_size 0x00000020 +#define regk_iop_sap_out_spu0_gio0 0x00000002 +#define regk_iop_sap_out_spu0_gio1 0x00000003 +#define regk_iop_sap_out_spu0_gio12 0x00000004 +#define regk_iop_sap_out_spu0_gio13 0x00000004 +#define regk_iop_sap_out_spu0_gio14 0x00000004 +#define regk_iop_sap_out_spu0_gio15 0x00000004 +#define regk_iop_sap_out_spu0_gio2 0x00000002 +#define regk_iop_sap_out_spu0_gio3 0x00000003 +#define regk_iop_sap_out_spu0_gio4 0x00000002 +#define regk_iop_sap_out_spu0_gio5 0x00000003 +#define regk_iop_sap_out_spu0_gio6 0x00000002 +#define regk_iop_sap_out_spu0_gio7 0x00000003 +#define regk_iop_sap_out_spu1_gio0 0x00000005 +#define regk_iop_sap_out_spu1_gio1 0x00000006 +#define regk_iop_sap_out_spu1_gio12 0x00000007 +#define regk_iop_sap_out_spu1_gio13 0x00000007 +#define regk_iop_sap_out_spu1_gio14 0x00000007 +#define regk_iop_sap_out_spu1_gio15 0x00000007 +#define regk_iop_sap_out_spu1_gio2 0x00000005 +#define regk_iop_sap_out_spu1_gio3 0x00000006 +#define regk_iop_sap_out_spu1_gio4 0x00000005 +#define regk_iop_sap_out_spu1_gio5 0x00000006 +#define regk_iop_sap_out_spu1_gio6 0x00000005 +#define regk_iop_sap_out_spu1_gio7 0x00000006 +#define regk_iop_sap_out_timer_grp0_tmr2 0x00000004 +#define regk_iop_sap_out_timer_grp1_tmr2 0x00000005 +#define regk_iop_sap_out_timer_grp2_tmr2 0x00000006 +#define regk_iop_sap_out_timer_grp3_tmr2 0x00000007 +#define regk_iop_sap_out_tmr 0x00000005 +#define regk_iop_sap_out_yes 0x00000001 +#endif /* __iop_sap_out_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_scrc_in_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_scrc_in_defs_asm.h new file mode 100644 index 000000000000..2cf5721597fc --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_scrc_in_defs_asm.h @@ -0,0 +1,111 @@ +#ifndef __iop_scrc_in_defs_asm_h +#define __iop_scrc_in_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_scrc_in.r + * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_scrc_in_defs_asm.h ../../inst/io_proc/rtl/iop_scrc_in.r + * id: $Id: iop_scrc_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope iop_scrc_in, type rw */ +#define reg_iop_scrc_in_rw_cfg___trig___lsb 0 +#define reg_iop_scrc_in_rw_cfg___trig___width 2 +#define reg_iop_scrc_in_rw_cfg_offset 0 + +/* Register rw_ctrl, scope iop_scrc_in, type rw */ +#define reg_iop_scrc_in_rw_ctrl___dif_in_en___lsb 0 +#define reg_iop_scrc_in_rw_ctrl___dif_in_en___width 1 +#define reg_iop_scrc_in_rw_ctrl___dif_in_en___bit 0 +#define reg_iop_scrc_in_rw_ctrl_offset 4 + +/* Register r_stat, scope iop_scrc_in, type r */ +#define reg_iop_scrc_in_r_stat___err___lsb 0 +#define reg_iop_scrc_in_r_stat___err___width 1 +#define reg_iop_scrc_in_r_stat___err___bit 0 +#define reg_iop_scrc_in_r_stat_offset 8 + +/* Register rw_init_crc, scope iop_scrc_in, type rw */ +#define reg_iop_scrc_in_rw_init_crc_offset 12 + +/* Register rs_computed_crc, scope iop_scrc_in, type rs */ +#define reg_iop_scrc_in_rs_computed_crc_offset 16 + +/* Register r_computed_crc, scope iop_scrc_in, type r */ +#define reg_iop_scrc_in_r_computed_crc_offset 20 + +/* Register rw_crc, scope iop_scrc_in, type rw */ +#define reg_iop_scrc_in_rw_crc_offset 24 + +/* Register rw_correct_crc, scope iop_scrc_in, type rw */ +#define reg_iop_scrc_in_rw_correct_crc_offset 28 + +/* Register rw_wr1bit, scope iop_scrc_in, type rw */ +#define reg_iop_scrc_in_rw_wr1bit___data___lsb 0 +#define reg_iop_scrc_in_rw_wr1bit___data___width 2 +#define reg_iop_scrc_in_rw_wr1bit___last___lsb 2 +#define reg_iop_scrc_in_rw_wr1bit___last___width 2 +#define reg_iop_scrc_in_rw_wr1bit_offset 32 + + +/* Constants */ +#define regk_iop_scrc_in_dif_in 0x00000002 +#define regk_iop_scrc_in_hi 0x00000000 +#define regk_iop_scrc_in_neg 0x00000002 +#define regk_iop_scrc_in_no 0x00000000 +#define regk_iop_scrc_in_pos 0x00000001 +#define regk_iop_scrc_in_pos_neg 0x00000003 +#define regk_iop_scrc_in_r_computed_crc_default 0x00000000 +#define regk_iop_scrc_in_rs_computed_crc_default 0x00000000 +#define regk_iop_scrc_in_rw_cfg_default 0x00000000 +#define regk_iop_scrc_in_rw_ctrl_default 0x00000000 +#define regk_iop_scrc_in_rw_init_crc_default 0x00000000 +#define regk_iop_scrc_in_set0 0x00000000 +#define regk_iop_scrc_in_set1 0x00000001 +#define regk_iop_scrc_in_yes 0x00000001 +#endif /* __iop_scrc_in_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_scrc_out_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_scrc_out_defs_asm.h new file mode 100644 index 000000000000..640a25725f20 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_scrc_out_defs_asm.h @@ -0,0 +1,105 @@ +#ifndef __iop_scrc_out_defs_asm_h +#define __iop_scrc_out_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_scrc_out.r + * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_scrc_out_defs_asm.h ../../inst/io_proc/rtl/iop_scrc_out.r + * id: $Id: iop_scrc_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope iop_scrc_out, type rw */ +#define reg_iop_scrc_out_rw_cfg___trig___lsb 0 +#define reg_iop_scrc_out_rw_cfg___trig___width 2 +#define reg_iop_scrc_out_rw_cfg___inv_crc___lsb 2 +#define reg_iop_scrc_out_rw_cfg___inv_crc___width 1 +#define reg_iop_scrc_out_rw_cfg___inv_crc___bit 2 +#define reg_iop_scrc_out_rw_cfg_offset 0 + +/* Register rw_ctrl, scope iop_scrc_out, type rw */ +#define reg_iop_scrc_out_rw_ctrl___strb_src___lsb 0 +#define reg_iop_scrc_out_rw_ctrl___strb_src___width 1 +#define reg_iop_scrc_out_rw_ctrl___strb_src___bit 0 +#define reg_iop_scrc_out_rw_ctrl___out_src___lsb 1 +#define reg_iop_scrc_out_rw_ctrl___out_src___width 1 +#define reg_iop_scrc_out_rw_ctrl___out_src___bit 1 +#define reg_iop_scrc_out_rw_ctrl_offset 4 + +/* Register rw_init_crc, scope iop_scrc_out, type rw */ +#define reg_iop_scrc_out_rw_init_crc_offset 8 + +/* Register rw_crc, scope iop_scrc_out, type rw */ +#define reg_iop_scrc_out_rw_crc_offset 12 + +/* Register rw_data, scope iop_scrc_out, type rw */ +#define reg_iop_scrc_out_rw_data___val___lsb 0 +#define reg_iop_scrc_out_rw_data___val___width 1 +#define reg_iop_scrc_out_rw_data___val___bit 0 +#define reg_iop_scrc_out_rw_data_offset 16 + +/* Register r_computed_crc, scope iop_scrc_out, type r */ +#define reg_iop_scrc_out_r_computed_crc_offset 20 + + +/* Constants */ +#define regk_iop_scrc_out_crc 0x00000001 +#define regk_iop_scrc_out_data 0x00000000 +#define regk_iop_scrc_out_dif 0x00000001 +#define regk_iop_scrc_out_hi 0x00000000 +#define regk_iop_scrc_out_neg 0x00000002 +#define regk_iop_scrc_out_no 0x00000000 +#define regk_iop_scrc_out_pos 0x00000001 +#define regk_iop_scrc_out_pos_neg 0x00000003 +#define regk_iop_scrc_out_reg 0x00000000 +#define regk_iop_scrc_out_rw_cfg_default 0x00000000 +#define regk_iop_scrc_out_rw_crc_default 0x00000000 +#define regk_iop_scrc_out_rw_ctrl_default 0x00000000 +#define regk_iop_scrc_out_rw_data_default 0x00000000 +#define regk_iop_scrc_out_rw_init_crc_default 0x00000000 +#define regk_iop_scrc_out_yes 0x00000001 +#endif /* __iop_scrc_out_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_spu_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_spu_defs_asm.h new file mode 100644 index 000000000000..bb402c1aa761 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_spu_defs_asm.h @@ -0,0 +1,573 @@ +#ifndef __iop_spu_defs_asm_h +#define __iop_spu_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_spu.r + * id: + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_spu_defs_asm.h ../../inst/io_proc/rtl/iop_spu.r + * id: $Id: iop_spu_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +#define STRIDE_iop_spu_rw_r 4 +/* Register rw_r, scope iop_spu, type rw */ +#define reg_iop_spu_rw_r_offset 0 + +/* Register rw_seq_pc, scope iop_spu, type rw */ +#define reg_iop_spu_rw_seq_pc___addr___lsb 0 +#define reg_iop_spu_rw_seq_pc___addr___width 12 +#define reg_iop_spu_rw_seq_pc_offset 64 + +/* Register rw_fsm_pc, scope iop_spu, type rw */ +#define reg_iop_spu_rw_fsm_pc___addr___lsb 0 +#define reg_iop_spu_rw_fsm_pc___addr___width 12 +#define reg_iop_spu_rw_fsm_pc_offset 68 + +/* Register rw_ctrl, scope iop_spu, type rw */ +#define reg_iop_spu_rw_ctrl___fsm___lsb 0 +#define reg_iop_spu_rw_ctrl___fsm___width 1 +#define reg_iop_spu_rw_ctrl___fsm___bit 0 +#define reg_iop_spu_rw_ctrl___en___lsb 1 +#define reg_iop_spu_rw_ctrl___en___width 1 +#define reg_iop_spu_rw_ctrl___en___bit 1 +#define reg_iop_spu_rw_ctrl_offset 72 + +/* Register rw_fsm_inputs3_0, scope iop_spu, type rw */ +#define reg_iop_spu_rw_fsm_inputs3_0___val0___lsb 0 +#define reg_iop_spu_rw_fsm_inputs3_0___val0___width 5 +#define reg_iop_spu_rw_fsm_inputs3_0___src0___lsb 5 +#define reg_iop_spu_rw_fsm_inputs3_0___src0___width 3 +#define reg_iop_spu_rw_fsm_inputs3_0___val1___lsb 8 +#define reg_iop_spu_rw_fsm_inputs3_0___val1___width 5 +#define reg_iop_spu_rw_fsm_inputs3_0___src1___lsb 13 +#define reg_iop_spu_rw_fsm_inputs3_0___src1___width 3 +#define reg_iop_spu_rw_fsm_inputs3_0___val2___lsb 16 +#define reg_iop_spu_rw_fsm_inputs3_0___val2___width 5 +#define reg_iop_spu_rw_fsm_inputs3_0___src2___lsb 21 +#define reg_iop_spu_rw_fsm_inputs3_0___src2___width 3 +#define reg_iop_spu_rw_fsm_inputs3_0___val3___lsb 24 +#define reg_iop_spu_rw_fsm_inputs3_0___val3___width 5 +#define reg_iop_spu_rw_fsm_inputs3_0___src3___lsb 29 +#define reg_iop_spu_rw_fsm_inputs3_0___src3___width 3 +#define reg_iop_spu_rw_fsm_inputs3_0_offset 76 + +/* Register rw_fsm_inputs7_4, scope iop_spu, type rw */ +#define reg_iop_spu_rw_fsm_inputs7_4___val4___lsb 0 +#define reg_iop_spu_rw_fsm_inputs7_4___val4___width 5 +#define reg_iop_spu_rw_fsm_inputs7_4___src4___lsb 5 +#define reg_iop_spu_rw_fsm_inputs7_4___src4___width 3 +#define reg_iop_spu_rw_fsm_inputs7_4___val5___lsb 8 +#define reg_iop_spu_rw_fsm_inputs7_4___val5___width 5 +#define reg_iop_spu_rw_fsm_inputs7_4___src5___lsb 13 +#define reg_iop_spu_rw_fsm_inputs7_4___src5___width 3 +#define reg_iop_spu_rw_fsm_inputs7_4___val6___lsb 16 +#define reg_iop_spu_rw_fsm_inputs7_4___val6___width 5 +#define reg_iop_spu_rw_fsm_inputs7_4___src6___lsb 21 +#define reg_iop_spu_rw_fsm_inputs7_4___src6___width 3 +#define reg_iop_spu_rw_fsm_inputs7_4___val7___lsb 24 +#define reg_iop_spu_rw_fsm_inputs7_4___val7___width 5 +#define reg_iop_spu_rw_fsm_inputs7_4___src7___lsb 29 +#define reg_iop_spu_rw_fsm_inputs7_4___src7___width 3 +#define reg_iop_spu_rw_fsm_inputs7_4_offset 80 + +/* Register rw_gio_out, scope iop_spu, type rw */ +#define reg_iop_spu_rw_gio_out_offset 84 + +/* Register rw_bus0_out, scope iop_spu, type rw */ +#define reg_iop_spu_rw_bus0_out_offset 88 + +/* Register rw_bus1_out, scope iop_spu, type rw */ +#define reg_iop_spu_rw_bus1_out_offset 92 + +/* Register r_gio_in, scope iop_spu, type r */ +#define reg_iop_spu_r_gio_in_offset 96 + +/* Register r_bus0_in, scope iop_spu, type r */ +#define reg_iop_spu_r_bus0_in_offset 100 + +/* Register r_bus1_in, scope iop_spu, type r */ +#define reg_iop_spu_r_bus1_in_offset 104 + +/* Register rw_gio_out_set, scope iop_spu, type rw */ +#define reg_iop_spu_rw_gio_out_set_offset 108 + +/* Register rw_gio_out_clr, scope iop_spu, type rw */ +#define reg_iop_spu_rw_gio_out_clr_offset 112 + +/* Register rs_wr_stat, scope iop_spu, type rs */ +#define reg_iop_spu_rs_wr_stat___r0___lsb 0 +#define reg_iop_spu_rs_wr_stat___r0___width 1 +#define reg_iop_spu_rs_wr_stat___r0___bit 0 +#define reg_iop_spu_rs_wr_stat___r1___lsb 1 +#define reg_iop_spu_rs_wr_stat___r1___width 1 +#define reg_iop_spu_rs_wr_stat___r1___bit 1 +#define reg_iop_spu_rs_wr_stat___r2___lsb 2 +#define reg_iop_spu_rs_wr_stat___r2___width 1 +#define reg_iop_spu_rs_wr_stat___r2___bit 2 +#define reg_iop_spu_rs_wr_stat___r3___lsb 3 +#define reg_iop_spu_rs_wr_stat___r3___width 1 +#define reg_iop_spu_rs_wr_stat___r3___bit 3 +#define reg_iop_spu_rs_wr_stat___r4___lsb 4 +#define reg_iop_spu_rs_wr_stat___r4___width 1 +#define reg_iop_spu_rs_wr_stat___r4___bit 4 +#define reg_iop_spu_rs_wr_stat___r5___lsb 5 +#define reg_iop_spu_rs_wr_stat___r5___width 1 +#define reg_iop_spu_rs_wr_stat___r5___bit 5 +#define reg_iop_spu_rs_wr_stat___r6___lsb 6 +#define reg_iop_spu_rs_wr_stat___r6___width 1 +#define reg_iop_spu_rs_wr_stat___r6___bit 6 +#define reg_iop_spu_rs_wr_stat___r7___lsb 7 +#define reg_iop_spu_rs_wr_stat___r7___width 1 +#define reg_iop_spu_rs_wr_stat___r7___bit 7 +#define reg_iop_spu_rs_wr_stat___r8___lsb 8 +#define reg_iop_spu_rs_wr_stat___r8___width 1 +#define reg_iop_spu_rs_wr_stat___r8___bit 8 +#define reg_iop_spu_rs_wr_stat___r9___lsb 9 +#define reg_iop_spu_rs_wr_stat___r9___width 1 +#define reg_iop_spu_rs_wr_stat___r9___bit 9 +#define reg_iop_spu_rs_wr_stat___r10___lsb 10 +#define reg_iop_spu_rs_wr_stat___r10___width 1 +#define reg_iop_spu_rs_wr_stat___r10___bit 10 +#define reg_iop_spu_rs_wr_stat___r11___lsb 11 +#define reg_iop_spu_rs_wr_stat___r11___width 1 +#define reg_iop_spu_rs_wr_stat___r11___bit 11 +#define reg_iop_spu_rs_wr_stat___r12___lsb 12 +#define reg_iop_spu_rs_wr_stat___r12___width 1 +#define reg_iop_spu_rs_wr_stat___r12___bit 12 +#define reg_iop_spu_rs_wr_stat___r13___lsb 13 +#define reg_iop_spu_rs_wr_stat___r13___width 1 +#define reg_iop_spu_rs_wr_stat___r13___bit 13 +#define reg_iop_spu_rs_wr_stat___r14___lsb 14 +#define reg_iop_spu_rs_wr_stat___r14___width 1 +#define reg_iop_spu_rs_wr_stat___r14___bit 14 +#define reg_iop_spu_rs_wr_stat___r15___lsb 15 +#define reg_iop_spu_rs_wr_stat___r15___width 1 +#define reg_iop_spu_rs_wr_stat___r15___bit 15 +#define reg_iop_spu_rs_wr_stat_offset 116 + +/* Register r_wr_stat, scope iop_spu, type r */ +#define reg_iop_spu_r_wr_stat___r0___lsb 0 +#define reg_iop_spu_r_wr_stat___r0___width 1 +#define reg_iop_spu_r_wr_stat___r0___bit 0 +#define reg_iop_spu_r_wr_stat___r1___lsb 1 +#define reg_iop_spu_r_wr_stat___r1___width 1 +#define reg_iop_spu_r_wr_stat___r1___bit 1 +#define reg_iop_spu_r_wr_stat___r2___lsb 2 +#define reg_iop_spu_r_wr_stat___r2___width 1 +#define reg_iop_spu_r_wr_stat___r2___bit 2 +#define reg_iop_spu_r_wr_stat___r3___lsb 3 +#define reg_iop_spu_r_wr_stat___r3___width 1 +#define reg_iop_spu_r_wr_stat___r3___bit 3 +#define reg_iop_spu_r_wr_stat___r4___lsb 4 +#define reg_iop_spu_r_wr_stat___r4___width 1 +#define reg_iop_spu_r_wr_stat___r4___bit 4 +#define reg_iop_spu_r_wr_stat___r5___lsb 5 +#define reg_iop_spu_r_wr_stat___r5___width 1 +#define reg_iop_spu_r_wr_stat___r5___bit 5 +#define reg_iop_spu_r_wr_stat___r6___lsb 6 +#define reg_iop_spu_r_wr_stat___r6___width 1 +#define reg_iop_spu_r_wr_stat___r6___bit 6 +#define reg_iop_spu_r_wr_stat___r7___lsb 7 +#define reg_iop_spu_r_wr_stat___r7___width 1 +#define reg_iop_spu_r_wr_stat___r7___bit 7 +#define reg_iop_spu_r_wr_stat___r8___lsb 8 +#define reg_iop_spu_r_wr_stat___r8___width 1 +#define reg_iop_spu_r_wr_stat___r8___bit 8 +#define reg_iop_spu_r_wr_stat___r9___lsb 9 +#define reg_iop_spu_r_wr_stat___r9___width 1 +#define reg_iop_spu_r_wr_stat___r9___bit 9 +#define reg_iop_spu_r_wr_stat___r10___lsb 10 +#define reg_iop_spu_r_wr_stat___r10___width 1 +#define reg_iop_spu_r_wr_stat___r10___bit 10 +#define reg_iop_spu_r_wr_stat___r11___lsb 11 +#define reg_iop_spu_r_wr_stat___r11___width 1 +#define reg_iop_spu_r_wr_stat___r11___bit 11 +#define reg_iop_spu_r_wr_stat___r12___lsb 12 +#define reg_iop_spu_r_wr_stat___r12___width 1 +#define reg_iop_spu_r_wr_stat___r12___bit 12 +#define reg_iop_spu_r_wr_stat___r13___lsb 13 +#define reg_iop_spu_r_wr_stat___r13___width 1 +#define reg_iop_spu_r_wr_stat___r13___bit 13 +#define reg_iop_spu_r_wr_stat___r14___lsb 14 +#define reg_iop_spu_r_wr_stat___r14___width 1 +#define reg_iop_spu_r_wr_stat___r14___bit 14 +#define reg_iop_spu_r_wr_stat___r15___lsb 15 +#define reg_iop_spu_r_wr_stat___r15___width 1 +#define reg_iop_spu_r_wr_stat___r15___bit 15 +#define reg_iop_spu_r_wr_stat_offset 120 + +/* Register r_reg_indexed_by_bus0_in, scope iop_spu, type r */ +#define reg_iop_spu_r_reg_indexed_by_bus0_in_offset 124 + +/* Register r_stat_in, scope iop_spu, type r */ +#define reg_iop_spu_r_stat_in___timer_grp_lo___lsb 0 +#define reg_iop_spu_r_stat_in___timer_grp_lo___width 4 +#define reg_iop_spu_r_stat_in___fifo_out_last___lsb 4 +#define reg_iop_spu_r_stat_in___fifo_out_last___width 1 +#define reg_iop_spu_r_stat_in___fifo_out_last___bit 4 +#define reg_iop_spu_r_stat_in___fifo_out_rdy___lsb 5 +#define reg_iop_spu_r_stat_in___fifo_out_rdy___width 1 +#define reg_iop_spu_r_stat_in___fifo_out_rdy___bit 5 +#define reg_iop_spu_r_stat_in___fifo_out_all___lsb 6 +#define reg_iop_spu_r_stat_in___fifo_out_all___width 1 +#define reg_iop_spu_r_stat_in___fifo_out_all___bit 6 +#define reg_iop_spu_r_stat_in___fifo_in_rdy___lsb 7 +#define reg_iop_spu_r_stat_in___fifo_in_rdy___width 1 +#define reg_iop_spu_r_stat_in___fifo_in_rdy___bit 7 +#define reg_iop_spu_r_stat_in___dmc_out_all___lsb 8 +#define reg_iop_spu_r_stat_in___dmc_out_all___width 1 +#define reg_iop_spu_r_stat_in___dmc_out_all___bit 8 +#define reg_iop_spu_r_stat_in___dmc_out_dth___lsb 9 +#define reg_iop_spu_r_stat_in___dmc_out_dth___width 1 +#define reg_iop_spu_r_stat_in___dmc_out_dth___bit 9 +#define reg_iop_spu_r_stat_in___dmc_out_eop___lsb 10 +#define reg_iop_spu_r_stat_in___dmc_out_eop___width 1 +#define reg_iop_spu_r_stat_in___dmc_out_eop___bit 10 +#define reg_iop_spu_r_stat_in___dmc_out_dv___lsb 11 +#define reg_iop_spu_r_stat_in___dmc_out_dv___width 1 +#define reg_iop_spu_r_stat_in___dmc_out_dv___bit 11 +#define reg_iop_spu_r_stat_in___dmc_out_last___lsb 12 +#define reg_iop_spu_r_stat_in___dmc_out_last___width 1 +#define reg_iop_spu_r_stat_in___dmc_out_last___bit 12 +#define reg_iop_spu_r_stat_in___dmc_out_cmd_rq___lsb 13 +#define reg_iop_spu_r_stat_in___dmc_out_cmd_rq___width 1 +#define reg_iop_spu_r_stat_in___dmc_out_cmd_rq___bit 13 +#define reg_iop_spu_r_stat_in___dmc_out_cmd_rdy___lsb 14 +#define reg_iop_spu_r_stat_in___dmc_out_cmd_rdy___width 1 +#define reg_iop_spu_r_stat_in___dmc_out_cmd_rdy___bit 14 +#define reg_iop_spu_r_stat_in___pcrc_correct___lsb 15 +#define reg_iop_spu_r_stat_in___pcrc_correct___width 1 +#define reg_iop_spu_r_stat_in___pcrc_correct___bit 15 +#define reg_iop_spu_r_stat_in___timer_grp_hi___lsb 16 +#define reg_iop_spu_r_stat_in___timer_grp_hi___width 4 +#define reg_iop_spu_r_stat_in___dmc_in_sth___lsb 20 +#define reg_iop_spu_r_stat_in___dmc_in_sth___width 1 +#define reg_iop_spu_r_stat_in___dmc_in_sth___bit 20 +#define reg_iop_spu_r_stat_in___dmc_in_full___lsb 21 +#define reg_iop_spu_r_stat_in___dmc_in_full___width 1 +#define reg_iop_spu_r_stat_in___dmc_in_full___bit 21 +#define reg_iop_spu_r_stat_in___dmc_in_cmd_rdy___lsb 22 +#define reg_iop_spu_r_stat_in___dmc_in_cmd_rdy___width 1 +#define reg_iop_spu_r_stat_in___dmc_in_cmd_rdy___bit 22 +#define reg_iop_spu_r_stat_in___spu_gio_out___lsb 23 +#define reg_iop_spu_r_stat_in___spu_gio_out___width 4 +#define reg_iop_spu_r_stat_in___sync_clk12___lsb 27 +#define reg_iop_spu_r_stat_in___sync_clk12___width 1 +#define reg_iop_spu_r_stat_in___sync_clk12___bit 27 +#define reg_iop_spu_r_stat_in___scrc_out_data___lsb 28 +#define reg_iop_spu_r_stat_in___scrc_out_data___width 1 +#define reg_iop_spu_r_stat_in___scrc_out_data___bit 28 +#define reg_iop_spu_r_stat_in___scrc_in_err___lsb 29 +#define reg_iop_spu_r_stat_in___scrc_in_err___width 1 +#define reg_iop_spu_r_stat_in___scrc_in_err___bit 29 +#define reg_iop_spu_r_stat_in___mc_busy___lsb 30 +#define reg_iop_spu_r_stat_in___mc_busy___width 1 +#define reg_iop_spu_r_stat_in___mc_busy___bit 30 +#define reg_iop_spu_r_stat_in___mc_owned___lsb 31 +#define reg_iop_spu_r_stat_in___mc_owned___width 1 +#define reg_iop_spu_r_stat_in___mc_owned___bit 31 +#define reg_iop_spu_r_stat_in_offset 128 + +/* Register r_trigger_in, scope iop_spu, type r */ +#define reg_iop_spu_r_trigger_in_offset 132 + +/* Register r_special_stat, scope iop_spu, type r */ +#define reg_iop_spu_r_special_stat___c_flag___lsb 0 +#define reg_iop_spu_r_special_stat___c_flag___width 1 +#define reg_iop_spu_r_special_stat___c_flag___bit 0 +#define reg_iop_spu_r_special_stat___v_flag___lsb 1 +#define reg_iop_spu_r_special_stat___v_flag___width 1 +#define reg_iop_spu_r_special_stat___v_flag___bit 1 +#define reg_iop_spu_r_special_stat___z_flag___lsb 2 +#define reg_iop_spu_r_special_stat___z_flag___width 1 +#define reg_iop_spu_r_special_stat___z_flag___bit 2 +#define reg_iop_spu_r_special_stat___n_flag___lsb 3 +#define reg_iop_spu_r_special_stat___n_flag___width 1 +#define reg_iop_spu_r_special_stat___n_flag___bit 3 +#define reg_iop_spu_r_special_stat___xor_bus0_r2_0___lsb 4 +#define reg_iop_spu_r_special_stat___xor_bus0_r2_0___width 1 +#define reg_iop_spu_r_special_stat___xor_bus0_r2_0___bit 4 +#define reg_iop_spu_r_special_stat___xor_bus1_r3_0___lsb 5 +#define reg_iop_spu_r_special_stat___xor_bus1_r3_0___width 1 +#define reg_iop_spu_r_special_stat___xor_bus1_r3_0___bit 5 +#define reg_iop_spu_r_special_stat___xor_bus0m_r2_0___lsb 6 +#define reg_iop_spu_r_special_stat___xor_bus0m_r2_0___width 1 +#define reg_iop_spu_r_special_stat___xor_bus0m_r2_0___bit 6 +#define reg_iop_spu_r_special_stat___xor_bus1m_r3_0___lsb 7 +#define reg_iop_spu_r_special_stat___xor_bus1m_r3_0___width 1 +#define reg_iop_spu_r_special_stat___xor_bus1m_r3_0___bit 7 +#define reg_iop_spu_r_special_stat___fsm_in0___lsb 8 +#define reg_iop_spu_r_special_stat___fsm_in0___width 1 +#define reg_iop_spu_r_special_stat___fsm_in0___bit 8 +#define reg_iop_spu_r_special_stat___fsm_in1___lsb 9 +#define reg_iop_spu_r_special_stat___fsm_in1___width 1 +#define reg_iop_spu_r_special_stat___fsm_in1___bit 9 +#define reg_iop_spu_r_special_stat___fsm_in2___lsb 10 +#define reg_iop_spu_r_special_stat___fsm_in2___width 1 +#define reg_iop_spu_r_special_stat___fsm_in2___bit 10 +#define reg_iop_spu_r_special_stat___fsm_in3___lsb 11 +#define reg_iop_spu_r_special_stat___fsm_in3___width 1 +#define reg_iop_spu_r_special_stat___fsm_in3___bit 11 +#define reg_iop_spu_r_special_stat___fsm_in4___lsb 12 +#define reg_iop_spu_r_special_stat___fsm_in4___width 1 +#define reg_iop_spu_r_special_stat___fsm_in4___bit 12 +#define reg_iop_spu_r_special_stat___fsm_in5___lsb 13 +#define reg_iop_spu_r_special_stat___fsm_in5___width 1 +#define reg_iop_spu_r_special_stat___fsm_in5___bit 13 +#define reg_iop_spu_r_special_stat___fsm_in6___lsb 14 +#define reg_iop_spu_r_special_stat___fsm_in6___width 1 +#define reg_iop_spu_r_special_stat___fsm_in6___bit 14 +#define reg_iop_spu_r_special_stat___fsm_in7___lsb 15 +#define reg_iop_spu_r_special_stat___fsm_in7___width 1 +#define reg_iop_spu_r_special_stat___fsm_in7___bit 15 +#define reg_iop_spu_r_special_stat___event0___lsb 16 +#define reg_iop_spu_r_special_stat___event0___width 1 +#define reg_iop_spu_r_special_stat___event0___bit 16 +#define reg_iop_spu_r_special_stat___event1___lsb 17 +#define reg_iop_spu_r_special_stat___event1___width 1 +#define reg_iop_spu_r_special_stat___event1___bit 17 +#define reg_iop_spu_r_special_stat___event2___lsb 18 +#define reg_iop_spu_r_special_stat___event2___width 1 +#define reg_iop_spu_r_special_stat___event2___bit 18 +#define reg_iop_spu_r_special_stat___event3___lsb 19 +#define reg_iop_spu_r_special_stat___event3___width 1 +#define reg_iop_spu_r_special_stat___event3___bit 19 +#define reg_iop_spu_r_special_stat_offset 136 + +/* Register rw_reg_access, scope iop_spu, type rw */ +#define reg_iop_spu_rw_reg_access___addr___lsb 0 +#define reg_iop_spu_rw_reg_access___addr___width 13 +#define reg_iop_spu_rw_reg_access___imm_hi___lsb 16 +#define reg_iop_spu_rw_reg_access___imm_hi___width 16 +#define reg_iop_spu_rw_reg_access_offset 140 + +#define STRIDE_iop_spu_rw_event_cfg 4 +/* Register rw_event_cfg, scope iop_spu, type rw */ +#define reg_iop_spu_rw_event_cfg___addr___lsb 0 +#define reg_iop_spu_rw_event_cfg___addr___width 12 +#define reg_iop_spu_rw_event_cfg___src___lsb 12 +#define reg_iop_spu_rw_event_cfg___src___width 2 +#define reg_iop_spu_rw_event_cfg___eq_en___lsb 14 +#define reg_iop_spu_rw_event_cfg___eq_en___width 1 +#define reg_iop_spu_rw_event_cfg___eq_en___bit 14 +#define reg_iop_spu_rw_event_cfg___eq_inv___lsb 15 +#define reg_iop_spu_rw_event_cfg___eq_inv___width 1 +#define reg_iop_spu_rw_event_cfg___eq_inv___bit 15 +#define reg_iop_spu_rw_event_cfg___gt_en___lsb 16 +#define reg_iop_spu_rw_event_cfg___gt_en___width 1 +#define reg_iop_spu_rw_event_cfg___gt_en___bit 16 +#define reg_iop_spu_rw_event_cfg___gt_inv___lsb 17 +#define reg_iop_spu_rw_event_cfg___gt_inv___width 1 +#define reg_iop_spu_rw_event_cfg___gt_inv___bit 17 +#define reg_iop_spu_rw_event_cfg_offset 144 + +#define STRIDE_iop_spu_rw_event_mask 4 +/* Register rw_event_mask, scope iop_spu, type rw */ +#define reg_iop_spu_rw_event_mask_offset 160 + +#define STRIDE_iop_spu_rw_event_val 4 +/* Register rw_event_val, scope iop_spu, type rw */ +#define reg_iop_spu_rw_event_val_offset 176 + +/* Register rw_event_ret, scope iop_spu, type rw */ +#define reg_iop_spu_rw_event_ret___addr___lsb 0 +#define reg_iop_spu_rw_event_ret___addr___width 12 +#define reg_iop_spu_rw_event_ret_offset 192 + +/* Register r_trace, scope iop_spu, type r */ +#define reg_iop_spu_r_trace___fsm___lsb 0 +#define reg_iop_spu_r_trace___fsm___width 1 +#define reg_iop_spu_r_trace___fsm___bit 0 +#define reg_iop_spu_r_trace___en___lsb 1 +#define reg_iop_spu_r_trace___en___width 1 +#define reg_iop_spu_r_trace___en___bit 1 +#define reg_iop_spu_r_trace___c_flag___lsb 2 +#define reg_iop_spu_r_trace___c_flag___width 1 +#define reg_iop_spu_r_trace___c_flag___bit 2 +#define reg_iop_spu_r_trace___v_flag___lsb 3 +#define reg_iop_spu_r_trace___v_flag___width 1 +#define reg_iop_spu_r_trace___v_flag___bit 3 +#define reg_iop_spu_r_trace___z_flag___lsb 4 +#define reg_iop_spu_r_trace___z_flag___width 1 +#define reg_iop_spu_r_trace___z_flag___bit 4 +#define reg_iop_spu_r_trace___n_flag___lsb 5 +#define reg_iop_spu_r_trace___n_flag___width 1 +#define reg_iop_spu_r_trace___n_flag___bit 5 +#define reg_iop_spu_r_trace___seq_addr___lsb 6 +#define reg_iop_spu_r_trace___seq_addr___width 12 +#define reg_iop_spu_r_trace___fsm_addr___lsb 20 +#define reg_iop_spu_r_trace___fsm_addr___width 12 +#define reg_iop_spu_r_trace_offset 196 + +/* Register r_fsm_trace, scope iop_spu, type r */ +#define reg_iop_spu_r_fsm_trace___fsm___lsb 0 +#define reg_iop_spu_r_fsm_trace___fsm___width 1 +#define reg_iop_spu_r_fsm_trace___fsm___bit 0 +#define reg_iop_spu_r_fsm_trace___en___lsb 1 +#define reg_iop_spu_r_fsm_trace___en___width 1 +#define reg_iop_spu_r_fsm_trace___en___bit 1 +#define reg_iop_spu_r_fsm_trace___tmr_done___lsb 2 +#define reg_iop_spu_r_fsm_trace___tmr_done___width 1 +#define reg_iop_spu_r_fsm_trace___tmr_done___bit 2 +#define reg_iop_spu_r_fsm_trace___inp0___lsb 3 +#define reg_iop_spu_r_fsm_trace___inp0___width 1 +#define reg_iop_spu_r_fsm_trace___inp0___bit 3 +#define reg_iop_spu_r_fsm_trace___inp1___lsb 4 +#define reg_iop_spu_r_fsm_trace___inp1___width 1 +#define reg_iop_spu_r_fsm_trace___inp1___bit 4 +#define reg_iop_spu_r_fsm_trace___inp2___lsb 5 +#define reg_iop_spu_r_fsm_trace___inp2___width 1 +#define reg_iop_spu_r_fsm_trace___inp2___bit 5 +#define reg_iop_spu_r_fsm_trace___inp3___lsb 6 +#define reg_iop_spu_r_fsm_trace___inp3___width 1 +#define reg_iop_spu_r_fsm_trace___inp3___bit 6 +#define reg_iop_spu_r_fsm_trace___event0___lsb 7 +#define reg_iop_spu_r_fsm_trace___event0___width 1 +#define reg_iop_spu_r_fsm_trace___event0___bit 7 +#define reg_iop_spu_r_fsm_trace___event1___lsb 8 +#define reg_iop_spu_r_fsm_trace___event1___width 1 +#define reg_iop_spu_r_fsm_trace___event1___bit 8 +#define reg_iop_spu_r_fsm_trace___event2___lsb 9 +#define reg_iop_spu_r_fsm_trace___event2___width 1 +#define reg_iop_spu_r_fsm_trace___event2___bit 9 +#define reg_iop_spu_r_fsm_trace___event3___lsb 10 +#define reg_iop_spu_r_fsm_trace___event3___width 1 +#define reg_iop_spu_r_fsm_trace___event3___bit 10 +#define reg_iop_spu_r_fsm_trace___gio_out___lsb 11 +#define reg_iop_spu_r_fsm_trace___gio_out___width 8 +#define reg_iop_spu_r_fsm_trace___fsm_addr___lsb 20 +#define reg_iop_spu_r_fsm_trace___fsm_addr___width 12 +#define reg_iop_spu_r_fsm_trace_offset 200 + +#define STRIDE_iop_spu_rw_brp 4 +/* Register rw_brp, scope iop_spu, type rw */ +#define reg_iop_spu_rw_brp___addr___lsb 0 +#define reg_iop_spu_rw_brp___addr___width 12 +#define reg_iop_spu_rw_brp___fsm___lsb 12 +#define reg_iop_spu_rw_brp___fsm___width 1 +#define reg_iop_spu_rw_brp___fsm___bit 12 +#define reg_iop_spu_rw_brp___en___lsb 13 +#define reg_iop_spu_rw_brp___en___width 1 +#define reg_iop_spu_rw_brp___en___bit 13 +#define reg_iop_spu_rw_brp_offset 204 + + +/* Constants */ +#define regk_iop_spu_attn_hi 0x00000005 +#define regk_iop_spu_attn_lo 0x00000005 +#define regk_iop_spu_attn_r0 0x00000000 +#define regk_iop_spu_attn_r1 0x00000001 +#define regk_iop_spu_attn_r10 0x00000002 +#define regk_iop_spu_attn_r11 0x00000003 +#define regk_iop_spu_attn_r12 0x00000004 +#define regk_iop_spu_attn_r13 0x00000005 +#define regk_iop_spu_attn_r14 0x00000006 +#define regk_iop_spu_attn_r15 0x00000007 +#define regk_iop_spu_attn_r2 0x00000002 +#define regk_iop_spu_attn_r3 0x00000003 +#define regk_iop_spu_attn_r4 0x00000004 +#define regk_iop_spu_attn_r5 0x00000005 +#define regk_iop_spu_attn_r6 0x00000006 +#define regk_iop_spu_attn_r7 0x00000007 +#define regk_iop_spu_attn_r8 0x00000000 +#define regk_iop_spu_attn_r9 0x00000001 +#define regk_iop_spu_c 0x00000000 +#define regk_iop_spu_flag 0x00000002 +#define regk_iop_spu_gio_in 0x00000000 +#define regk_iop_spu_gio_out 0x00000005 +#define regk_iop_spu_gio_out0 0x00000008 +#define regk_iop_spu_gio_out1 0x00000009 +#define regk_iop_spu_gio_out2 0x0000000a +#define regk_iop_spu_gio_out3 0x0000000b +#define regk_iop_spu_gio_out4 0x0000000c +#define regk_iop_spu_gio_out5 0x0000000d +#define regk_iop_spu_gio_out6 0x0000000e +#define regk_iop_spu_gio_out7 0x0000000f +#define regk_iop_spu_n 0x00000003 +#define regk_iop_spu_no 0x00000000 +#define regk_iop_spu_r0 0x00000008 +#define regk_iop_spu_r1 0x00000009 +#define regk_iop_spu_r10 0x0000000a +#define regk_iop_spu_r11 0x0000000b +#define regk_iop_spu_r12 0x0000000c +#define regk_iop_spu_r13 0x0000000d +#define regk_iop_spu_r14 0x0000000e +#define regk_iop_spu_r15 0x0000000f +#define regk_iop_spu_r2 0x0000000a +#define regk_iop_spu_r3 0x0000000b +#define regk_iop_spu_r4 0x0000000c +#define regk_iop_spu_r5 0x0000000d +#define regk_iop_spu_r6 0x0000000e +#define regk_iop_spu_r7 0x0000000f +#define regk_iop_spu_r8 0x00000008 +#define regk_iop_spu_r9 0x00000009 +#define regk_iop_spu_reg_hi 0x00000002 +#define regk_iop_spu_reg_lo 0x00000002 +#define regk_iop_spu_rw_brp_default 0x00000000 +#define regk_iop_spu_rw_brp_size 0x00000004 +#define regk_iop_spu_rw_ctrl_default 0x00000000 +#define regk_iop_spu_rw_event_cfg_size 0x00000004 +#define regk_iop_spu_rw_event_mask_size 0x00000004 +#define regk_iop_spu_rw_event_val_size 0x00000004 +#define regk_iop_spu_rw_gio_out_default 0x00000000 +#define regk_iop_spu_rw_r_size 0x00000010 +#define regk_iop_spu_rw_reg_access_default 0x00000000 +#define regk_iop_spu_stat_in 0x00000002 +#define regk_iop_spu_statin_hi 0x00000004 +#define regk_iop_spu_statin_lo 0x00000004 +#define regk_iop_spu_trig 0x00000003 +#define regk_iop_spu_trigger 0x00000006 +#define regk_iop_spu_v 0x00000001 +#define regk_iop_spu_wsts_gioout_spec 0x00000001 +#define regk_iop_spu_xor 0x00000003 +#define regk_iop_spu_xor_bus0_r2_0 0x00000000 +#define regk_iop_spu_xor_bus0m_r2_0 0x00000002 +#define regk_iop_spu_xor_bus1_r3_0 0x00000001 +#define regk_iop_spu_xor_bus1m_r3_0 0x00000003 +#define regk_iop_spu_yes 0x00000001 +#define regk_iop_spu_z 0x00000002 +#endif /* __iop_spu_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_cfg_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_cfg_defs_asm.h new file mode 100644 index 000000000000..3be60f9b024c --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_cfg_defs_asm.h @@ -0,0 +1,1052 @@ +#ifndef __iop_sw_cfg_defs_asm_h +#define __iop_sw_cfg_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r + * id: + * last modfied: Mon Apr 11 16:10:19 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_cfg_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r + * id: $Id: iop_sw_cfg_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_crc_par0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_crc_par0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_crc_par0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_crc_par0_owner_offset 0 + +/* Register rw_crc_par1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_crc_par1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_crc_par1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_crc_par1_owner_offset 4 + +/* Register rw_dmc_in0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_dmc_in0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_dmc_in0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_dmc_in0_owner_offset 8 + +/* Register rw_dmc_in1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_dmc_in1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_dmc_in1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_dmc_in1_owner_offset 12 + +/* Register rw_dmc_out0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_dmc_out0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_dmc_out0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_dmc_out0_owner_offset 16 + +/* Register rw_dmc_out1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_dmc_out1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_dmc_out1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_dmc_out1_owner_offset 20 + +/* Register rw_fifo_in0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_in0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_in0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_in0_owner_offset 24 + +/* Register rw_fifo_in0_extra_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_in0_extra_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_in0_extra_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_in0_extra_owner_offset 28 + +/* Register rw_fifo_in1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_in1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_in1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_in1_owner_offset 32 + +/* Register rw_fifo_in1_extra_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_in1_extra_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_in1_extra_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_in1_extra_owner_offset 36 + +/* Register rw_fifo_out0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_out0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_out0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_out0_owner_offset 40 + +/* Register rw_fifo_out0_extra_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_out0_extra_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_out0_extra_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_out0_extra_owner_offset 44 + +/* Register rw_fifo_out1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_out1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_out1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_out1_owner_offset 48 + +/* Register rw_fifo_out1_extra_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_out1_extra_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_out1_extra_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_out1_extra_owner_offset 52 + +/* Register rw_sap_in_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_sap_in_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_sap_in_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_sap_in_owner_offset 56 + +/* Register rw_sap_out_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_sap_out_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_sap_out_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_sap_out_owner_offset 60 + +/* Register rw_scrc_in0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_scrc_in0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_scrc_in0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_scrc_in0_owner_offset 64 + +/* Register rw_scrc_in1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_scrc_in1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_scrc_in1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_scrc_in1_owner_offset 68 + +/* Register rw_scrc_out0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_scrc_out0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_scrc_out0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_scrc_out0_owner_offset 72 + +/* Register rw_scrc_out1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_scrc_out1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_scrc_out1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_scrc_out1_owner_offset 76 + +/* Register rw_spu0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_spu0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_spu0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_spu0_owner_offset 80 + +/* Register rw_spu1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_spu1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_spu1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_spu1_owner_offset 84 + +/* Register rw_timer_grp0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_owner_offset 88 + +/* Register rw_timer_grp1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_owner_offset 92 + +/* Register rw_timer_grp2_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp2_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp2_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_timer_grp2_owner_offset 96 + +/* Register rw_timer_grp3_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp3_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp3_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_timer_grp3_owner_offset 100 + +/* Register rw_trigger_grp0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp0_owner_offset 104 + +/* Register rw_trigger_grp1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp1_owner_offset 108 + +/* Register rw_trigger_grp2_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp2_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp2_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp2_owner_offset 112 + +/* Register rw_trigger_grp3_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp3_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp3_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp3_owner_offset 116 + +/* Register rw_trigger_grp4_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp4_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp4_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp4_owner_offset 120 + +/* Register rw_trigger_grp5_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp5_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp5_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp5_owner_offset 124 + +/* Register rw_trigger_grp6_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp6_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp6_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp6_owner_offset 128 + +/* Register rw_trigger_grp7_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp7_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp7_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp7_owner_offset 132 + +/* Register rw_bus0_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus0_mask___byte0___lsb 0 +#define reg_iop_sw_cfg_rw_bus0_mask___byte0___width 8 +#define reg_iop_sw_cfg_rw_bus0_mask___byte1___lsb 8 +#define reg_iop_sw_cfg_rw_bus0_mask___byte1___width 8 +#define reg_iop_sw_cfg_rw_bus0_mask___byte2___lsb 16 +#define reg_iop_sw_cfg_rw_bus0_mask___byte2___width 8 +#define reg_iop_sw_cfg_rw_bus0_mask___byte3___lsb 24 +#define reg_iop_sw_cfg_rw_bus0_mask___byte3___width 8 +#define reg_iop_sw_cfg_rw_bus0_mask_offset 136 + +/* Register rw_bus0_oe_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte0___lsb 0 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte0___width 1 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte0___bit 0 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte1___lsb 1 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte1___width 1 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte1___bit 1 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte2___lsb 2 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte2___width 1 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte2___bit 2 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte3___lsb 3 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte3___width 1 +#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte3___bit 3 +#define reg_iop_sw_cfg_rw_bus0_oe_mask_offset 140 + +/* Register rw_bus1_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus1_mask___byte0___lsb 0 +#define reg_iop_sw_cfg_rw_bus1_mask___byte0___width 8 +#define reg_iop_sw_cfg_rw_bus1_mask___byte1___lsb 8 +#define reg_iop_sw_cfg_rw_bus1_mask___byte1___width 8 +#define reg_iop_sw_cfg_rw_bus1_mask___byte2___lsb 16 +#define reg_iop_sw_cfg_rw_bus1_mask___byte2___width 8 +#define reg_iop_sw_cfg_rw_bus1_mask___byte3___lsb 24 +#define reg_iop_sw_cfg_rw_bus1_mask___byte3___width 8 +#define reg_iop_sw_cfg_rw_bus1_mask_offset 144 + +/* Register rw_bus1_oe_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte0___lsb 0 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte0___width 1 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte0___bit 0 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte1___lsb 1 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte1___width 1 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte1___bit 1 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte2___lsb 2 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte2___width 1 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte2___bit 2 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte3___lsb 3 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte3___width 1 +#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte3___bit 3 +#define reg_iop_sw_cfg_rw_bus1_oe_mask_offset 148 + +/* Register rw_gio_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_mask___val___lsb 0 +#define reg_iop_sw_cfg_rw_gio_mask___val___width 32 +#define reg_iop_sw_cfg_rw_gio_mask_offset 152 + +/* Register rw_gio_oe_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_oe_mask___val___lsb 0 +#define reg_iop_sw_cfg_rw_gio_oe_mask___val___width 32 +#define reg_iop_sw_cfg_rw_gio_oe_mask_offset 156 + +/* Register rw_pinmapping, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte0___lsb 0 +#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte0___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte1___lsb 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte1___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte2___lsb 4 +#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte2___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte3___lsb 6 +#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte3___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte0___lsb 8 +#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte0___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte1___lsb 10 +#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte1___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte2___lsb 12 +#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte2___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte3___lsb 14 +#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte3___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio3_0___lsb 16 +#define reg_iop_sw_cfg_rw_pinmapping___gio3_0___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio7_4___lsb 18 +#define reg_iop_sw_cfg_rw_pinmapping___gio7_4___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio11_8___lsb 20 +#define reg_iop_sw_cfg_rw_pinmapping___gio11_8___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio15_12___lsb 22 +#define reg_iop_sw_cfg_rw_pinmapping___gio15_12___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio19_16___lsb 24 +#define reg_iop_sw_cfg_rw_pinmapping___gio19_16___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio23_20___lsb 26 +#define reg_iop_sw_cfg_rw_pinmapping___gio23_20___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio27_24___lsb 28 +#define reg_iop_sw_cfg_rw_pinmapping___gio27_24___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio31_28___lsb 30 +#define reg_iop_sw_cfg_rw_pinmapping___gio31_28___width 2 +#define reg_iop_sw_cfg_rw_pinmapping_offset 160 + +/* Register rw_bus_out_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_lo___lsb 0 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_lo___width 3 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_hi___lsb 3 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_hi___width 3 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_lo_oe___lsb 6 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_lo_oe___width 3 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_hi_oe___lsb 9 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_hi_oe___width 3 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_lo___lsb 12 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_lo___width 3 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_hi___lsb 15 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_hi___width 3 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_lo_oe___lsb 18 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_lo_oe___width 3 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_hi_oe___lsb 21 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_hi_oe___width 3 +#define reg_iop_sw_cfg_rw_bus_out_cfg_offset 164 + +/* Register rw_gio_out_grp0_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1___lsb 6 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___lsb 10 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___lsb 16 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3___lsb 18 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___lsb 22 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg_offset 168 + +/* Register rw_gio_out_grp1_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5___lsb 6 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___lsb 10 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___lsb 16 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7___lsb 18 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___lsb 22 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg_offset 172 + +/* Register rw_gio_out_grp2_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9___lsb 6 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___lsb 10 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___lsb 16 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11___lsb 18 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___lsb 22 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg_offset 176 + +/* Register rw_gio_out_grp3_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13___lsb 6 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___lsb 10 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___lsb 16 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15___lsb 18 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___lsb 22 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg_offset 180 + +/* Register rw_gio_out_grp4_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17___lsb 6 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___lsb 10 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___lsb 16 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19___lsb 18 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___lsb 22 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg_offset 184 + +/* Register rw_gio_out_grp5_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21___lsb 6 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___lsb 10 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___lsb 16 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23___lsb 18 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___lsb 22 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg_offset 188 + +/* Register rw_gio_out_grp6_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25___lsb 6 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___lsb 10 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___lsb 16 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27___lsb 18 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___lsb 22 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg_offset 192 + +/* Register rw_gio_out_grp7_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29___lsb 6 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___lsb 10 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___lsb 16 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31___lsb 18 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31___width 4 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___lsb 22 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___width 2 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg_offset 196 + +/* Register rw_spu0_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_spu0_cfg___bus0_in___lsb 0 +#define reg_iop_sw_cfg_rw_spu0_cfg___bus0_in___width 2 +#define reg_iop_sw_cfg_rw_spu0_cfg___bus1_in___lsb 2 +#define reg_iop_sw_cfg_rw_spu0_cfg___bus1_in___width 2 +#define reg_iop_sw_cfg_rw_spu0_cfg_offset 200 + +/* Register rw_spu1_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_spu1_cfg___bus0_in___lsb 0 +#define reg_iop_sw_cfg_rw_spu1_cfg___bus0_in___width 2 +#define reg_iop_sw_cfg_rw_spu1_cfg___bus1_in___lsb 2 +#define reg_iop_sw_cfg_rw_spu1_cfg___bus1_in___width 2 +#define reg_iop_sw_cfg_rw_spu1_cfg_offset 204 + +/* Register rw_timer_grp0_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___ext_clk___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___ext_clk___width 3 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___lsb 3 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___bit 3 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___lsb 4 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___bit 4 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___lsb 5 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___bit 5 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___lsb 6 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___bit 6 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___lsb 7 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___bit 7 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___lsb 8 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___bit 8 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___lsb 9 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___bit 9 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___lsb 10 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___bit 10 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg_offset 208 + +/* Register rw_timer_grp1_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___ext_clk___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___ext_clk___width 3 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___lsb 3 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___bit 3 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___lsb 4 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___bit 4 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___lsb 5 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___bit 5 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___lsb 6 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___bit 6 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___lsb 7 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___bit 7 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___lsb 8 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___bit 8 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___lsb 9 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___bit 9 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___lsb 10 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___bit 10 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg_offset 212 + +/* Register rw_timer_grp2_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___ext_clk___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___ext_clk___width 3 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_en___lsb 3 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_en___bit 3 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_en___lsb 4 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_en___bit 4 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_en___lsb 5 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_en___bit 5 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_en___lsb 6 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_en___bit 6 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_dis___lsb 7 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_dis___bit 7 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_dis___lsb 8 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_dis___bit 8 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_dis___lsb 9 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_dis___bit 9 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_dis___lsb 10 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_dis___bit 10 +#define reg_iop_sw_cfg_rw_timer_grp2_cfg_offset 216 + +/* Register rw_timer_grp3_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___ext_clk___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___ext_clk___width 3 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_en___lsb 3 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_en___bit 3 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_en___lsb 4 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_en___bit 4 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_en___lsb 5 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_en___bit 5 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_en___lsb 6 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_en___width 1 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_en___bit 6 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_dis___lsb 7 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_dis___bit 7 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_dis___lsb 8 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_dis___bit 8 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_dis___lsb 9 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_dis___bit 9 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_dis___lsb 10 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_dis___width 1 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_dis___bit 10 +#define reg_iop_sw_cfg_rw_timer_grp3_cfg_offset 220 + +/* Register rw_trigger_grps_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___bit 0 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___lsb 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___bit 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___lsb 2 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___bit 2 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___lsb 3 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___bit 3 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___lsb 4 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___bit 4 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___lsb 5 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___bit 5 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___lsb 6 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___bit 6 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___lsb 7 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___bit 7 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___lsb 8 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___bit 8 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___lsb 9 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___bit 9 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___lsb 10 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___bit 10 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___lsb 11 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___bit 11 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___lsb 12 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___bit 12 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___lsb 13 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___bit 13 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___lsb 14 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___bit 14 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___lsb 15 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___bit 15 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg_offset 224 + +/* Register rw_pdp0_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_pdp0_cfg___dmc0_usr___lsb 0 +#define reg_iop_sw_cfg_rw_pdp0_cfg___dmc0_usr___width 1 +#define reg_iop_sw_cfg_rw_pdp0_cfg___dmc0_usr___bit 0 +#define reg_iop_sw_cfg_rw_pdp0_cfg___out_strb___lsb 1 +#define reg_iop_sw_cfg_rw_pdp0_cfg___out_strb___width 5 +#define reg_iop_sw_cfg_rw_pdp0_cfg___in_src___lsb 6 +#define reg_iop_sw_cfg_rw_pdp0_cfg___in_src___width 3 +#define reg_iop_sw_cfg_rw_pdp0_cfg___in_size___lsb 9 +#define reg_iop_sw_cfg_rw_pdp0_cfg___in_size___width 3 +#define reg_iop_sw_cfg_rw_pdp0_cfg___in_last___lsb 12 +#define reg_iop_sw_cfg_rw_pdp0_cfg___in_last___width 2 +#define reg_iop_sw_cfg_rw_pdp0_cfg___in_strb___lsb 14 +#define reg_iop_sw_cfg_rw_pdp0_cfg___in_strb___width 4 +#define reg_iop_sw_cfg_rw_pdp0_cfg___out_src___lsb 18 +#define reg_iop_sw_cfg_rw_pdp0_cfg___out_src___width 1 +#define reg_iop_sw_cfg_rw_pdp0_cfg___out_src___bit 18 +#define reg_iop_sw_cfg_rw_pdp0_cfg_offset 228 + +/* Register rw_pdp1_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_pdp1_cfg___dmc1_usr___lsb 0 +#define reg_iop_sw_cfg_rw_pdp1_cfg___dmc1_usr___width 1 +#define reg_iop_sw_cfg_rw_pdp1_cfg___dmc1_usr___bit 0 +#define reg_iop_sw_cfg_rw_pdp1_cfg___out_strb___lsb 1 +#define reg_iop_sw_cfg_rw_pdp1_cfg___out_strb___width 5 +#define reg_iop_sw_cfg_rw_pdp1_cfg___in_src___lsb 6 +#define reg_iop_sw_cfg_rw_pdp1_cfg___in_src___width 3 +#define reg_iop_sw_cfg_rw_pdp1_cfg___in_size___lsb 9 +#define reg_iop_sw_cfg_rw_pdp1_cfg___in_size___width 3 +#define reg_iop_sw_cfg_rw_pdp1_cfg___in_last___lsb 12 +#define reg_iop_sw_cfg_rw_pdp1_cfg___in_last___width 2 +#define reg_iop_sw_cfg_rw_pdp1_cfg___in_strb___lsb 14 +#define reg_iop_sw_cfg_rw_pdp1_cfg___in_strb___width 4 +#define reg_iop_sw_cfg_rw_pdp1_cfg___out_src___lsb 18 +#define reg_iop_sw_cfg_rw_pdp1_cfg___out_src___width 1 +#define reg_iop_sw_cfg_rw_pdp1_cfg___out_src___bit 18 +#define reg_iop_sw_cfg_rw_pdp1_cfg_offset 232 + +/* Register rw_sdp_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out0_strb___lsb 0 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out0_strb___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out1_strb___lsb 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out1_strb___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_data___lsb 6 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_data___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_last___lsb 9 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_last___width 2 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_strb___lsb 11 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_strb___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_data___lsb 14 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_data___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_last___lsb 17 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_last___width 2 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_strb___lsb 19 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_strb___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg_offset 236 + + +/* Constants */ +#define regk_iop_sw_cfg_a 0x00000001 +#define regk_iop_sw_cfg_b 0x00000002 +#define regk_iop_sw_cfg_bus0 0x00000000 +#define regk_iop_sw_cfg_bus0_rot16 0x00000004 +#define regk_iop_sw_cfg_bus0_rot24 0x00000006 +#define regk_iop_sw_cfg_bus0_rot8 0x00000002 +#define regk_iop_sw_cfg_bus1 0x00000001 +#define regk_iop_sw_cfg_bus1_rot16 0x00000005 +#define regk_iop_sw_cfg_bus1_rot24 0x00000007 +#define regk_iop_sw_cfg_bus1_rot8 0x00000003 +#define regk_iop_sw_cfg_clk12 0x00000000 +#define regk_iop_sw_cfg_cpu 0x00000000 +#define regk_iop_sw_cfg_dmc0 0x00000000 +#define regk_iop_sw_cfg_dmc1 0x00000001 +#define regk_iop_sw_cfg_gated_clk0 0x00000010 +#define regk_iop_sw_cfg_gated_clk1 0x00000011 +#define regk_iop_sw_cfg_gated_clk2 0x00000012 +#define regk_iop_sw_cfg_gated_clk3 0x00000013 +#define regk_iop_sw_cfg_gio0 0x00000004 +#define regk_iop_sw_cfg_gio1 0x00000001 +#define regk_iop_sw_cfg_gio2 0x00000005 +#define regk_iop_sw_cfg_gio3 0x00000002 +#define regk_iop_sw_cfg_gio4 0x00000006 +#define regk_iop_sw_cfg_gio5 0x00000003 +#define regk_iop_sw_cfg_gio6 0x00000007 +#define regk_iop_sw_cfg_gio7 0x00000004 +#define regk_iop_sw_cfg_gio_in0 0x00000000 +#define regk_iop_sw_cfg_gio_in1 0x00000001 +#define regk_iop_sw_cfg_gio_in10 0x00000002 +#define regk_iop_sw_cfg_gio_in11 0x00000003 +#define regk_iop_sw_cfg_gio_in14 0x00000004 +#define regk_iop_sw_cfg_gio_in15 0x00000005 +#define regk_iop_sw_cfg_gio_in18 0x00000002 +#define regk_iop_sw_cfg_gio_in19 0x00000003 +#define regk_iop_sw_cfg_gio_in20 0x00000004 +#define regk_iop_sw_cfg_gio_in21 0x00000005 +#define regk_iop_sw_cfg_gio_in26 0x00000006 +#define regk_iop_sw_cfg_gio_in27 0x00000007 +#define regk_iop_sw_cfg_gio_in28 0x00000006 +#define regk_iop_sw_cfg_gio_in29 0x00000007 +#define regk_iop_sw_cfg_gio_in4 0x00000000 +#define regk_iop_sw_cfg_gio_in5 0x00000001 +#define regk_iop_sw_cfg_last_timer_grp0_tmr2 0x00000001 +#define regk_iop_sw_cfg_last_timer_grp1_tmr2 0x00000001 +#define regk_iop_sw_cfg_last_timer_grp2_tmr2 0x00000002 +#define regk_iop_sw_cfg_last_timer_grp2_tmr3 0x00000003 +#define regk_iop_sw_cfg_last_timer_grp3_tmr2 0x00000002 +#define regk_iop_sw_cfg_last_timer_grp3_tmr3 0x00000003 +#define regk_iop_sw_cfg_mpu 0x00000001 +#define regk_iop_sw_cfg_none 0x00000000 +#define regk_iop_sw_cfg_par0 0x00000000 +#define regk_iop_sw_cfg_par1 0x00000001 +#define regk_iop_sw_cfg_pdp_out0 0x00000002 +#define regk_iop_sw_cfg_pdp_out0_hi 0x00000001 +#define regk_iop_sw_cfg_pdp_out0_hi_rot8 0x00000005 +#define regk_iop_sw_cfg_pdp_out0_lo 0x00000000 +#define regk_iop_sw_cfg_pdp_out0_lo_rot8 0x00000004 +#define regk_iop_sw_cfg_pdp_out1 0x00000003 +#define regk_iop_sw_cfg_pdp_out1_hi 0x00000003 +#define regk_iop_sw_cfg_pdp_out1_hi_rot8 0x00000005 +#define regk_iop_sw_cfg_pdp_out1_lo 0x00000002 +#define regk_iop_sw_cfg_pdp_out1_lo_rot8 0x00000004 +#define regk_iop_sw_cfg_rw_bus0_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_bus0_oe_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_bus1_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_bus1_oe_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_bus_out_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_crc_par0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_crc_par1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_dmc_in0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_dmc_in1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_dmc_out0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_dmc_out1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_in0_extra_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_in0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_in1_extra_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_in1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_out0_extra_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_out0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_out1_extra_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_out1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_oe_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp0_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp1_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp2_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp3_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp4_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp5_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp6_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp7_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_pdp0_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_pdp1_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_pinmapping_default 0x55555555 +#define regk_iop_sw_cfg_rw_sap_in_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_sap_out_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_scrc_in0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_scrc_in1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_scrc_out0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_scrc_out1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_sdp_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_spu0_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_spu0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_spu1_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_spu1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp0_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp1_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp2_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp2_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp3_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp3_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp2_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp3_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp4_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp5_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp6_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp7_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grps_cfg_default 0x00000000 +#define regk_iop_sw_cfg_sdp_out0 0x00000008 +#define regk_iop_sw_cfg_sdp_out1 0x00000009 +#define regk_iop_sw_cfg_size16 0x00000002 +#define regk_iop_sw_cfg_size24 0x00000003 +#define regk_iop_sw_cfg_size32 0x00000004 +#define regk_iop_sw_cfg_size8 0x00000001 +#define regk_iop_sw_cfg_spu0 0x00000002 +#define regk_iop_sw_cfg_spu0_bus_out0_hi 0x00000006 +#define regk_iop_sw_cfg_spu0_bus_out0_lo 0x00000006 +#define regk_iop_sw_cfg_spu0_bus_out1_hi 0x00000007 +#define regk_iop_sw_cfg_spu0_bus_out1_lo 0x00000007 +#define regk_iop_sw_cfg_spu0_g0 0x0000000e +#define regk_iop_sw_cfg_spu0_g1 0x0000000e +#define regk_iop_sw_cfg_spu0_g2 0x0000000e +#define regk_iop_sw_cfg_spu0_g3 0x0000000e +#define regk_iop_sw_cfg_spu0_g4 0x0000000e +#define regk_iop_sw_cfg_spu0_g5 0x0000000e +#define regk_iop_sw_cfg_spu0_g6 0x0000000e +#define regk_iop_sw_cfg_spu0_g7 0x0000000e +#define regk_iop_sw_cfg_spu0_gio0 0x00000000 +#define regk_iop_sw_cfg_spu0_gio1 0x00000001 +#define regk_iop_sw_cfg_spu0_gio2 0x00000000 +#define regk_iop_sw_cfg_spu0_gio5 0x00000005 +#define regk_iop_sw_cfg_spu0_gio6 0x00000006 +#define regk_iop_sw_cfg_spu0_gio7 0x00000007 +#define regk_iop_sw_cfg_spu0_gio_out0 0x00000008 +#define regk_iop_sw_cfg_spu0_gio_out1 0x00000009 +#define regk_iop_sw_cfg_spu0_gio_out2 0x0000000a +#define regk_iop_sw_cfg_spu0_gio_out3 0x0000000b +#define regk_iop_sw_cfg_spu0_gio_out4 0x0000000c +#define regk_iop_sw_cfg_spu0_gio_out5 0x0000000d +#define regk_iop_sw_cfg_spu0_gio_out6 0x0000000e +#define regk_iop_sw_cfg_spu0_gio_out7 0x0000000f +#define regk_iop_sw_cfg_spu0_gioout0 0x00000000 +#define regk_iop_sw_cfg_spu0_gioout1 0x00000000 +#define regk_iop_sw_cfg_spu0_gioout10 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout11 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout12 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout13 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout14 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout15 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout16 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout17 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout18 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout19 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout2 0x00000002 +#define regk_iop_sw_cfg_spu0_gioout20 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout21 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout22 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout23 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout24 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout25 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout26 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout27 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout28 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout29 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout3 0x00000002 +#define regk_iop_sw_cfg_spu0_gioout30 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout31 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout4 0x00000004 +#define regk_iop_sw_cfg_spu0_gioout5 0x00000004 +#define regk_iop_sw_cfg_spu0_gioout6 0x00000006 +#define regk_iop_sw_cfg_spu0_gioout7 0x00000006 +#define regk_iop_sw_cfg_spu0_gioout8 0x0000000e +#define regk_iop_sw_cfg_spu0_gioout9 0x0000000e +#define regk_iop_sw_cfg_spu1 0x00000003 +#define regk_iop_sw_cfg_spu1_bus_out0_hi 0x00000006 +#define regk_iop_sw_cfg_spu1_bus_out0_lo 0x00000006 +#define regk_iop_sw_cfg_spu1_bus_out1_hi 0x00000007 +#define regk_iop_sw_cfg_spu1_bus_out1_lo 0x00000007 +#define regk_iop_sw_cfg_spu1_g0 0x0000000f +#define regk_iop_sw_cfg_spu1_g1 0x0000000f +#define regk_iop_sw_cfg_spu1_g2 0x0000000f +#define regk_iop_sw_cfg_spu1_g3 0x0000000f +#define regk_iop_sw_cfg_spu1_g4 0x0000000f +#define regk_iop_sw_cfg_spu1_g5 0x0000000f +#define regk_iop_sw_cfg_spu1_g6 0x0000000f +#define regk_iop_sw_cfg_spu1_g7 0x0000000f +#define regk_iop_sw_cfg_spu1_gio0 0x00000002 +#define regk_iop_sw_cfg_spu1_gio1 0x00000003 +#define regk_iop_sw_cfg_spu1_gio2 0x00000002 +#define regk_iop_sw_cfg_spu1_gio5 0x00000005 +#define regk_iop_sw_cfg_spu1_gio6 0x00000006 +#define regk_iop_sw_cfg_spu1_gio7 0x00000007 +#define regk_iop_sw_cfg_spu1_gio_out0 0x00000008 +#define regk_iop_sw_cfg_spu1_gio_out1 0x00000009 +#define regk_iop_sw_cfg_spu1_gio_out2 0x0000000a +#define regk_iop_sw_cfg_spu1_gio_out3 0x0000000b +#define regk_iop_sw_cfg_spu1_gio_out4 0x0000000c +#define regk_iop_sw_cfg_spu1_gio_out5 0x0000000d +#define regk_iop_sw_cfg_spu1_gio_out6 0x0000000e +#define regk_iop_sw_cfg_spu1_gio_out7 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout0 0x00000001 +#define regk_iop_sw_cfg_spu1_gioout1 0x00000001 +#define regk_iop_sw_cfg_spu1_gioout10 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout11 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout12 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout13 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout14 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout15 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout16 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout17 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout18 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout19 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout2 0x00000003 +#define regk_iop_sw_cfg_spu1_gioout20 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout21 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout22 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout23 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout24 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout25 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout26 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout27 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout28 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout29 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout3 0x00000003 +#define regk_iop_sw_cfg_spu1_gioout30 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout31 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout4 0x00000005 +#define regk_iop_sw_cfg_spu1_gioout5 0x00000005 +#define regk_iop_sw_cfg_spu1_gioout6 0x00000007 +#define regk_iop_sw_cfg_spu1_gioout7 0x00000007 +#define regk_iop_sw_cfg_spu1_gioout8 0x0000000f +#define regk_iop_sw_cfg_spu1_gioout9 0x0000000f +#define regk_iop_sw_cfg_strb_timer_grp0_tmr0 0x00000001 +#define regk_iop_sw_cfg_strb_timer_grp0_tmr1 0x00000002 +#define regk_iop_sw_cfg_strb_timer_grp1_tmr0 0x00000001 +#define regk_iop_sw_cfg_strb_timer_grp1_tmr1 0x00000002 +#define regk_iop_sw_cfg_strb_timer_grp2_tmr0 0x00000003 +#define regk_iop_sw_cfg_strb_timer_grp2_tmr1 0x00000002 +#define regk_iop_sw_cfg_strb_timer_grp3_tmr0 0x00000003 +#define regk_iop_sw_cfg_strb_timer_grp3_tmr1 0x00000002 +#define regk_iop_sw_cfg_timer_grp0 0x00000000 +#define regk_iop_sw_cfg_timer_grp0_rot 0x00000001 +#define regk_iop_sw_cfg_timer_grp0_strb0 0x0000000a +#define regk_iop_sw_cfg_timer_grp0_strb1 0x0000000a +#define regk_iop_sw_cfg_timer_grp0_strb2 0x0000000a +#define regk_iop_sw_cfg_timer_grp0_strb3 0x0000000a +#define regk_iop_sw_cfg_timer_grp0_tmr0 0x00000004 +#define regk_iop_sw_cfg_timer_grp0_tmr1 0x00000004 +#define regk_iop_sw_cfg_timer_grp1 0x00000000 +#define regk_iop_sw_cfg_timer_grp1_rot 0x00000001 +#define regk_iop_sw_cfg_timer_grp1_strb0 0x0000000b +#define regk_iop_sw_cfg_timer_grp1_strb1 0x0000000b +#define regk_iop_sw_cfg_timer_grp1_strb2 0x0000000b +#define regk_iop_sw_cfg_timer_grp1_strb3 0x0000000b +#define regk_iop_sw_cfg_timer_grp1_tmr0 0x00000005 +#define regk_iop_sw_cfg_timer_grp1_tmr1 0x00000005 +#define regk_iop_sw_cfg_timer_grp2 0x00000000 +#define regk_iop_sw_cfg_timer_grp2_rot 0x00000001 +#define regk_iop_sw_cfg_timer_grp2_strb0 0x0000000c +#define regk_iop_sw_cfg_timer_grp2_strb1 0x0000000c +#define regk_iop_sw_cfg_timer_grp2_strb2 0x0000000c +#define regk_iop_sw_cfg_timer_grp2_strb3 0x0000000c +#define regk_iop_sw_cfg_timer_grp2_tmr0 0x00000006 +#define regk_iop_sw_cfg_timer_grp2_tmr1 0x00000006 +#define regk_iop_sw_cfg_timer_grp3 0x00000000 +#define regk_iop_sw_cfg_timer_grp3_rot 0x00000001 +#define regk_iop_sw_cfg_timer_grp3_strb0 0x0000000d +#define regk_iop_sw_cfg_timer_grp3_strb1 0x0000000d +#define regk_iop_sw_cfg_timer_grp3_strb2 0x0000000d +#define regk_iop_sw_cfg_timer_grp3_strb3 0x0000000d +#define regk_iop_sw_cfg_timer_grp3_tmr0 0x00000007 +#define regk_iop_sw_cfg_timer_grp3_tmr1 0x00000007 +#define regk_iop_sw_cfg_trig0_0 0x00000000 +#define regk_iop_sw_cfg_trig0_1 0x00000000 +#define regk_iop_sw_cfg_trig0_2 0x00000000 +#define regk_iop_sw_cfg_trig0_3 0x00000000 +#define regk_iop_sw_cfg_trig1_0 0x00000000 +#define regk_iop_sw_cfg_trig1_1 0x00000000 +#define regk_iop_sw_cfg_trig1_2 0x00000000 +#define regk_iop_sw_cfg_trig1_3 0x00000000 +#define regk_iop_sw_cfg_trig2_0 0x00000000 +#define regk_iop_sw_cfg_trig2_1 0x00000000 +#define regk_iop_sw_cfg_trig2_2 0x00000000 +#define regk_iop_sw_cfg_trig2_3 0x00000000 +#define regk_iop_sw_cfg_trig3_0 0x00000000 +#define regk_iop_sw_cfg_trig3_1 0x00000000 +#define regk_iop_sw_cfg_trig3_2 0x00000000 +#define regk_iop_sw_cfg_trig3_3 0x00000000 +#define regk_iop_sw_cfg_trig4_0 0x00000001 +#define regk_iop_sw_cfg_trig4_1 0x00000001 +#define regk_iop_sw_cfg_trig4_2 0x00000001 +#define regk_iop_sw_cfg_trig4_3 0x00000001 +#define regk_iop_sw_cfg_trig5_0 0x00000001 +#define regk_iop_sw_cfg_trig5_1 0x00000001 +#define regk_iop_sw_cfg_trig5_2 0x00000001 +#define regk_iop_sw_cfg_trig5_3 0x00000001 +#define regk_iop_sw_cfg_trig6_0 0x00000001 +#define regk_iop_sw_cfg_trig6_1 0x00000001 +#define regk_iop_sw_cfg_trig6_2 0x00000001 +#define regk_iop_sw_cfg_trig6_3 0x00000001 +#define regk_iop_sw_cfg_trig7_0 0x00000001 +#define regk_iop_sw_cfg_trig7_1 0x00000001 +#define regk_iop_sw_cfg_trig7_2 0x00000001 +#define regk_iop_sw_cfg_trig7_3 0x00000001 +#endif /* __iop_sw_cfg_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_cpu_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_cpu_defs_asm.h new file mode 100644 index 000000000000..db347bcba025 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_cpu_defs_asm.h @@ -0,0 +1,1758 @@ +#ifndef __iop_sw_cpu_defs_asm_h +#define __iop_sw_cpu_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r + * id: + * last modfied: Mon Apr 11 16:10:19 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_cpu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r + * id: $Id: iop_sw_cpu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_mc_ctrl, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___lsb 0 +#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___width 1 +#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___bit 0 +#define reg_iop_sw_cpu_rw_mc_ctrl___cmd___lsb 1 +#define reg_iop_sw_cpu_rw_mc_ctrl___cmd___width 2 +#define reg_iop_sw_cpu_rw_mc_ctrl___size___lsb 3 +#define reg_iop_sw_cpu_rw_mc_ctrl___size___width 3 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu0_mem___lsb 6 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu0_mem___width 1 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu0_mem___bit 6 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu1_mem___lsb 7 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu1_mem___width 1 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu1_mem___bit 7 +#define reg_iop_sw_cpu_rw_mc_ctrl_offset 0 + +/* Register rw_mc_data, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_mc_data___val___lsb 0 +#define reg_iop_sw_cpu_rw_mc_data___val___width 32 +#define reg_iop_sw_cpu_rw_mc_data_offset 4 + +/* Register rw_mc_addr, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_mc_addr_offset 8 + +/* Register rs_mc_data, scope iop_sw_cpu, type rs */ +#define reg_iop_sw_cpu_rs_mc_data_offset 12 + +/* Register r_mc_data, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_mc_data_offset 16 + +/* Register r_mc_stat, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___lsb 0 +#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___bit 0 +#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___lsb 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___bit 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu0___lsb 2 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu0___width 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu0___bit 2 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu1___lsb 3 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu1___width 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu1___bit 3 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___lsb 4 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___bit 4 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___lsb 5 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___bit 5 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu0___lsb 6 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu0___width 1 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu0___bit 6 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu1___lsb 7 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu1___width 1 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu1___bit 7 +#define reg_iop_sw_cpu_r_mc_stat_offset 20 + +/* Register rw_bus0_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte0___width 8 +#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte1___lsb 8 +#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte1___width 8 +#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte2___lsb 16 +#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte2___width 8 +#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte3___lsb 24 +#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte3___width 8 +#define reg_iop_sw_cpu_rw_bus0_clr_mask_offset 24 + +/* Register rw_bus0_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus0_set_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus0_set_mask___byte0___width 8 +#define reg_iop_sw_cpu_rw_bus0_set_mask___byte1___lsb 8 +#define reg_iop_sw_cpu_rw_bus0_set_mask___byte1___width 8 +#define reg_iop_sw_cpu_rw_bus0_set_mask___byte2___lsb 16 +#define reg_iop_sw_cpu_rw_bus0_set_mask___byte2___width 8 +#define reg_iop_sw_cpu_rw_bus0_set_mask___byte3___lsb 24 +#define reg_iop_sw_cpu_rw_bus0_set_mask___byte3___width 8 +#define reg_iop_sw_cpu_rw_bus0_set_mask_offset 28 + +/* Register rw_bus0_oe_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask_offset 32 + +/* Register rw_bus0_oe_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte0___width 1 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte1___width 1 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte2___width 1 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte3___width 1 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_cpu_rw_bus0_oe_set_mask_offset 36 + +/* Register r_bus0_in, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_bus0_in_offset 40 + +/* Register rw_bus1_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte0___width 8 +#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte1___lsb 8 +#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte1___width 8 +#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte2___lsb 16 +#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte2___width 8 +#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte3___lsb 24 +#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte3___width 8 +#define reg_iop_sw_cpu_rw_bus1_clr_mask_offset 44 + +/* Register rw_bus1_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus1_set_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus1_set_mask___byte0___width 8 +#define reg_iop_sw_cpu_rw_bus1_set_mask___byte1___lsb 8 +#define reg_iop_sw_cpu_rw_bus1_set_mask___byte1___width 8 +#define reg_iop_sw_cpu_rw_bus1_set_mask___byte2___lsb 16 +#define reg_iop_sw_cpu_rw_bus1_set_mask___byte2___width 8 +#define reg_iop_sw_cpu_rw_bus1_set_mask___byte3___lsb 24 +#define reg_iop_sw_cpu_rw_bus1_set_mask___byte3___width 8 +#define reg_iop_sw_cpu_rw_bus1_set_mask_offset 48 + +/* Register rw_bus1_oe_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask_offset 52 + +/* Register rw_bus1_oe_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte0___width 1 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte1___width 1 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte2___width 1 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte3___width 1 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_cpu_rw_bus1_oe_set_mask_offset 56 + +/* Register r_bus1_in, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_bus1_in_offset 60 + +/* Register rw_gio_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_clr_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_clr_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_clr_mask_offset 64 + +/* Register rw_gio_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_set_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_set_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_set_mask_offset 68 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_oe_clr_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_oe_clr_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_oe_clr_mask_offset 72 + +/* Register rw_gio_oe_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_oe_set_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_oe_set_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_oe_set_mask_offset 76 + +/* Register r_gio_in, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_gio_in_offset 80 + +/* Register rw_intr0_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___lsb 0 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___bit 0 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___lsb 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___bit 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___lsb 2 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___bit 2 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___lsb 3 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___bit 3 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___lsb 4 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___bit 4 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___lsb 5 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___bit 5 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___lsb 6 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___bit 6 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___lsb 7 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___bit 7 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___lsb 8 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___bit 8 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___lsb 9 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___bit 9 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___lsb 10 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___bit 10 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___lsb 11 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___bit 11 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___lsb 12 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___bit 12 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___lsb 13 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___bit 13 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___lsb 14 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___bit 14 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___lsb 15 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___bit 15 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_0___lsb 16 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_0___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_0___bit 16 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_1___lsb 17 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_1___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_1___bit 17 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_2___lsb 18 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_2___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_2___bit 18 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_3___lsb 19 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_3___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_3___bit 19 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_4___lsb 20 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_4___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_4___bit 20 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_5___lsb 21 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_5___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_5___bit 21 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_6___lsb 22 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_6___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_6___bit 22 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_7___lsb 23 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_7___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu0_7___bit 23 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_8___lsb 24 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_8___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_8___bit 24 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_9___lsb 25 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_9___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_9___bit 25 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_10___lsb 26 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_10___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_10___bit 26 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_11___lsb 27 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_11___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_11___bit 27 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_12___lsb 28 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_12___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_12___bit 28 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_13___lsb 29 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_13___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_13___bit 29 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_14___lsb 30 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_14___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_14___bit 30 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_15___lsb 31 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_15___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu1_15___bit 31 +#define reg_iop_sw_cpu_rw_intr0_mask_offset 84 + +/* Register rw_ack_intr0, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___lsb 0 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___bit 0 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___lsb 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___bit 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___lsb 2 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___bit 2 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___lsb 3 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___bit 3 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___lsb 4 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___bit 4 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___lsb 5 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___bit 5 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___lsb 6 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___bit 6 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___lsb 7 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___bit 7 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___lsb 8 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___bit 8 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___lsb 9 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___bit 9 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___lsb 10 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___bit 10 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___lsb 11 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___bit 11 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___lsb 12 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___bit 12 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___lsb 13 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___bit 13 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___lsb 14 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___bit 14 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___lsb 15 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___bit 15 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_0___lsb 16 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_0___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_0___bit 16 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_1___lsb 17 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_1___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_1___bit 17 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_2___lsb 18 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_2___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_2___bit 18 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_3___lsb 19 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_3___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_3___bit 19 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_4___lsb 20 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_4___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_4___bit 20 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_5___lsb 21 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_5___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_5___bit 21 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_6___lsb 22 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_6___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_6___bit 22 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_7___lsb 23 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_7___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu0_7___bit 23 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_8___lsb 24 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_8___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_8___bit 24 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_9___lsb 25 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_9___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_9___bit 25 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_10___lsb 26 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_10___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_10___bit 26 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_11___lsb 27 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_11___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_11___bit 27 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_12___lsb 28 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_12___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_12___bit 28 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_13___lsb 29 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_13___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_13___bit 29 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_14___lsb 30 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_14___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_14___bit 30 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_15___lsb 31 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_15___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu1_15___bit 31 +#define reg_iop_sw_cpu_rw_ack_intr0_offset 88 + +/* Register r_intr0, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_intr0___mpu_0___lsb 0 +#define reg_iop_sw_cpu_r_intr0___mpu_0___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_0___bit 0 +#define reg_iop_sw_cpu_r_intr0___mpu_1___lsb 1 +#define reg_iop_sw_cpu_r_intr0___mpu_1___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_1___bit 1 +#define reg_iop_sw_cpu_r_intr0___mpu_2___lsb 2 +#define reg_iop_sw_cpu_r_intr0___mpu_2___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_2___bit 2 +#define reg_iop_sw_cpu_r_intr0___mpu_3___lsb 3 +#define reg_iop_sw_cpu_r_intr0___mpu_3___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_3___bit 3 +#define reg_iop_sw_cpu_r_intr0___mpu_4___lsb 4 +#define reg_iop_sw_cpu_r_intr0___mpu_4___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_4___bit 4 +#define reg_iop_sw_cpu_r_intr0___mpu_5___lsb 5 +#define reg_iop_sw_cpu_r_intr0___mpu_5___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_5___bit 5 +#define reg_iop_sw_cpu_r_intr0___mpu_6___lsb 6 +#define reg_iop_sw_cpu_r_intr0___mpu_6___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_6___bit 6 +#define reg_iop_sw_cpu_r_intr0___mpu_7___lsb 7 +#define reg_iop_sw_cpu_r_intr0___mpu_7___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_7___bit 7 +#define reg_iop_sw_cpu_r_intr0___mpu_8___lsb 8 +#define reg_iop_sw_cpu_r_intr0___mpu_8___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_8___bit 8 +#define reg_iop_sw_cpu_r_intr0___mpu_9___lsb 9 +#define reg_iop_sw_cpu_r_intr0___mpu_9___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_9___bit 9 +#define reg_iop_sw_cpu_r_intr0___mpu_10___lsb 10 +#define reg_iop_sw_cpu_r_intr0___mpu_10___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_10___bit 10 +#define reg_iop_sw_cpu_r_intr0___mpu_11___lsb 11 +#define reg_iop_sw_cpu_r_intr0___mpu_11___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_11___bit 11 +#define reg_iop_sw_cpu_r_intr0___mpu_12___lsb 12 +#define reg_iop_sw_cpu_r_intr0___mpu_12___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_12___bit 12 +#define reg_iop_sw_cpu_r_intr0___mpu_13___lsb 13 +#define reg_iop_sw_cpu_r_intr0___mpu_13___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_13___bit 13 +#define reg_iop_sw_cpu_r_intr0___mpu_14___lsb 14 +#define reg_iop_sw_cpu_r_intr0___mpu_14___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_14___bit 14 +#define reg_iop_sw_cpu_r_intr0___mpu_15___lsb 15 +#define reg_iop_sw_cpu_r_intr0___mpu_15___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_15___bit 15 +#define reg_iop_sw_cpu_r_intr0___spu0_0___lsb 16 +#define reg_iop_sw_cpu_r_intr0___spu0_0___width 1 +#define reg_iop_sw_cpu_r_intr0___spu0_0___bit 16 +#define reg_iop_sw_cpu_r_intr0___spu0_1___lsb 17 +#define reg_iop_sw_cpu_r_intr0___spu0_1___width 1 +#define reg_iop_sw_cpu_r_intr0___spu0_1___bit 17 +#define reg_iop_sw_cpu_r_intr0___spu0_2___lsb 18 +#define reg_iop_sw_cpu_r_intr0___spu0_2___width 1 +#define reg_iop_sw_cpu_r_intr0___spu0_2___bit 18 +#define reg_iop_sw_cpu_r_intr0___spu0_3___lsb 19 +#define reg_iop_sw_cpu_r_intr0___spu0_3___width 1 +#define reg_iop_sw_cpu_r_intr0___spu0_3___bit 19 +#define reg_iop_sw_cpu_r_intr0___spu0_4___lsb 20 +#define reg_iop_sw_cpu_r_intr0___spu0_4___width 1 +#define reg_iop_sw_cpu_r_intr0___spu0_4___bit 20 +#define reg_iop_sw_cpu_r_intr0___spu0_5___lsb 21 +#define reg_iop_sw_cpu_r_intr0___spu0_5___width 1 +#define reg_iop_sw_cpu_r_intr0___spu0_5___bit 21 +#define reg_iop_sw_cpu_r_intr0___spu0_6___lsb 22 +#define reg_iop_sw_cpu_r_intr0___spu0_6___width 1 +#define reg_iop_sw_cpu_r_intr0___spu0_6___bit 22 +#define reg_iop_sw_cpu_r_intr0___spu0_7___lsb 23 +#define reg_iop_sw_cpu_r_intr0___spu0_7___width 1 +#define reg_iop_sw_cpu_r_intr0___spu0_7___bit 23 +#define reg_iop_sw_cpu_r_intr0___spu1_8___lsb 24 +#define reg_iop_sw_cpu_r_intr0___spu1_8___width 1 +#define reg_iop_sw_cpu_r_intr0___spu1_8___bit 24 +#define reg_iop_sw_cpu_r_intr0___spu1_9___lsb 25 +#define reg_iop_sw_cpu_r_intr0___spu1_9___width 1 +#define reg_iop_sw_cpu_r_intr0___spu1_9___bit 25 +#define reg_iop_sw_cpu_r_intr0___spu1_10___lsb 26 +#define reg_iop_sw_cpu_r_intr0___spu1_10___width 1 +#define reg_iop_sw_cpu_r_intr0___spu1_10___bit 26 +#define reg_iop_sw_cpu_r_intr0___spu1_11___lsb 27 +#define reg_iop_sw_cpu_r_intr0___spu1_11___width 1 +#define reg_iop_sw_cpu_r_intr0___spu1_11___bit 27 +#define reg_iop_sw_cpu_r_intr0___spu1_12___lsb 28 +#define reg_iop_sw_cpu_r_intr0___spu1_12___width 1 +#define reg_iop_sw_cpu_r_intr0___spu1_12___bit 28 +#define reg_iop_sw_cpu_r_intr0___spu1_13___lsb 29 +#define reg_iop_sw_cpu_r_intr0___spu1_13___width 1 +#define reg_iop_sw_cpu_r_intr0___spu1_13___bit 29 +#define reg_iop_sw_cpu_r_intr0___spu1_14___lsb 30 +#define reg_iop_sw_cpu_r_intr0___spu1_14___width 1 +#define reg_iop_sw_cpu_r_intr0___spu1_14___bit 30 +#define reg_iop_sw_cpu_r_intr0___spu1_15___lsb 31 +#define reg_iop_sw_cpu_r_intr0___spu1_15___width 1 +#define reg_iop_sw_cpu_r_intr0___spu1_15___bit 31 +#define reg_iop_sw_cpu_r_intr0_offset 92 + +/* Register r_masked_intr0, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___lsb 0 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___bit 0 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___lsb 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___bit 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___lsb 2 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___bit 2 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___lsb 3 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___bit 3 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___lsb 4 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___bit 4 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___lsb 5 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___bit 5 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___lsb 6 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___bit 6 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___lsb 7 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___bit 7 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___lsb 8 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___bit 8 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___lsb 9 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___bit 9 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___lsb 10 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___bit 10 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___lsb 11 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___bit 11 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___lsb 12 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___bit 12 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___lsb 13 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___bit 13 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___lsb 14 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___bit 14 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___lsb 15 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___bit 15 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_0___lsb 16 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_0___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_0___bit 16 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_1___lsb 17 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_1___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_1___bit 17 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_2___lsb 18 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_2___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_2___bit 18 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_3___lsb 19 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_3___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_3___bit 19 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_4___lsb 20 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_4___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_4___bit 20 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_5___lsb 21 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_5___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_5___bit 21 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_6___lsb 22 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_6___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_6___bit 22 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_7___lsb 23 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_7___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu0_7___bit 23 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_8___lsb 24 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_8___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_8___bit 24 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_9___lsb 25 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_9___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_9___bit 25 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_10___lsb 26 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_10___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_10___bit 26 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_11___lsb 27 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_11___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_11___bit 27 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_12___lsb 28 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_12___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_12___bit 28 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_13___lsb 29 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_13___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_13___bit 29 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_14___lsb 30 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_14___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_14___bit 30 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_15___lsb 31 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_15___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu1_15___bit 31 +#define reg_iop_sw_cpu_r_masked_intr0_offset 96 + +/* Register rw_intr1_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___lsb 0 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___bit 0 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___lsb 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___bit 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___lsb 2 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___bit 2 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___lsb 3 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___bit 3 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___lsb 4 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___bit 4 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___lsb 5 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___bit 5 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___lsb 6 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___bit 6 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___lsb 7 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___bit 7 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___lsb 8 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___bit 8 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___lsb 9 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___bit 9 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___lsb 10 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___bit 10 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___lsb 11 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___bit 11 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___lsb 12 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___bit 12 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___lsb 13 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___bit 13 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___lsb 14 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___bit 14 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___lsb 15 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___bit 15 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_8___lsb 16 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_8___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_8___bit 16 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_9___lsb 17 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_9___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_9___bit 17 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_10___lsb 18 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_10___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_10___bit 18 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_11___lsb 19 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_11___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_11___bit 19 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_12___lsb 20 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_12___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_12___bit 20 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_13___lsb 21 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_13___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_13___bit 21 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_14___lsb 22 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_14___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_14___bit 22 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_15___lsb 23 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_15___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu0_15___bit 23 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_0___lsb 24 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_0___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_0___bit 24 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_1___lsb 25 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_1___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_1___bit 25 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_2___lsb 26 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_2___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_2___bit 26 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_3___lsb 27 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_3___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_3___bit 27 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_4___lsb 28 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_4___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_4___bit 28 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_5___lsb 29 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_5___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_5___bit 29 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_6___lsb 30 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_6___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_6___bit 30 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_7___lsb 31 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_7___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___spu1_7___bit 31 +#define reg_iop_sw_cpu_rw_intr1_mask_offset 100 + +/* Register rw_ack_intr1, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___lsb 0 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___bit 0 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___lsb 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___bit 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___lsb 2 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___bit 2 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___lsb 3 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___bit 3 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___lsb 4 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___bit 4 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___lsb 5 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___bit 5 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___lsb 6 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___bit 6 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___lsb 7 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___bit 7 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___lsb 8 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___bit 8 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___lsb 9 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___bit 9 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___lsb 10 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___bit 10 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___lsb 11 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___bit 11 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___lsb 12 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___bit 12 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___lsb 13 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___bit 13 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___lsb 14 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___bit 14 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___lsb 15 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___bit 15 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_8___lsb 16 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_8___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_8___bit 16 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_9___lsb 17 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_9___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_9___bit 17 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_10___lsb 18 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_10___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_10___bit 18 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_11___lsb 19 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_11___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_11___bit 19 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_12___lsb 20 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_12___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_12___bit 20 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_13___lsb 21 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_13___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_13___bit 21 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_14___lsb 22 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_14___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_14___bit 22 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_15___lsb 23 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_15___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu0_15___bit 23 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_0___lsb 24 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_0___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_0___bit 24 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_1___lsb 25 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_1___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_1___bit 25 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_2___lsb 26 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_2___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_2___bit 26 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_3___lsb 27 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_3___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_3___bit 27 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_4___lsb 28 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_4___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_4___bit 28 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_5___lsb 29 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_5___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_5___bit 29 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_6___lsb 30 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_6___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_6___bit 30 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_7___lsb 31 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_7___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___spu1_7___bit 31 +#define reg_iop_sw_cpu_rw_ack_intr1_offset 104 + +/* Register r_intr1, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_intr1___mpu_16___lsb 0 +#define reg_iop_sw_cpu_r_intr1___mpu_16___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_16___bit 0 +#define reg_iop_sw_cpu_r_intr1___mpu_17___lsb 1 +#define reg_iop_sw_cpu_r_intr1___mpu_17___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_17___bit 1 +#define reg_iop_sw_cpu_r_intr1___mpu_18___lsb 2 +#define reg_iop_sw_cpu_r_intr1___mpu_18___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_18___bit 2 +#define reg_iop_sw_cpu_r_intr1___mpu_19___lsb 3 +#define reg_iop_sw_cpu_r_intr1___mpu_19___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_19___bit 3 +#define reg_iop_sw_cpu_r_intr1___mpu_20___lsb 4 +#define reg_iop_sw_cpu_r_intr1___mpu_20___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_20___bit 4 +#define reg_iop_sw_cpu_r_intr1___mpu_21___lsb 5 +#define reg_iop_sw_cpu_r_intr1___mpu_21___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_21___bit 5 +#define reg_iop_sw_cpu_r_intr1___mpu_22___lsb 6 +#define reg_iop_sw_cpu_r_intr1___mpu_22___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_22___bit 6 +#define reg_iop_sw_cpu_r_intr1___mpu_23___lsb 7 +#define reg_iop_sw_cpu_r_intr1___mpu_23___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_23___bit 7 +#define reg_iop_sw_cpu_r_intr1___mpu_24___lsb 8 +#define reg_iop_sw_cpu_r_intr1___mpu_24___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_24___bit 8 +#define reg_iop_sw_cpu_r_intr1___mpu_25___lsb 9 +#define reg_iop_sw_cpu_r_intr1___mpu_25___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_25___bit 9 +#define reg_iop_sw_cpu_r_intr1___mpu_26___lsb 10 +#define reg_iop_sw_cpu_r_intr1___mpu_26___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_26___bit 10 +#define reg_iop_sw_cpu_r_intr1___mpu_27___lsb 11 +#define reg_iop_sw_cpu_r_intr1___mpu_27___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_27___bit 11 +#define reg_iop_sw_cpu_r_intr1___mpu_28___lsb 12 +#define reg_iop_sw_cpu_r_intr1___mpu_28___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_28___bit 12 +#define reg_iop_sw_cpu_r_intr1___mpu_29___lsb 13 +#define reg_iop_sw_cpu_r_intr1___mpu_29___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_29___bit 13 +#define reg_iop_sw_cpu_r_intr1___mpu_30___lsb 14 +#define reg_iop_sw_cpu_r_intr1___mpu_30___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_30___bit 14 +#define reg_iop_sw_cpu_r_intr1___mpu_31___lsb 15 +#define reg_iop_sw_cpu_r_intr1___mpu_31___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_31___bit 15 +#define reg_iop_sw_cpu_r_intr1___spu0_8___lsb 16 +#define reg_iop_sw_cpu_r_intr1___spu0_8___width 1 +#define reg_iop_sw_cpu_r_intr1___spu0_8___bit 16 +#define reg_iop_sw_cpu_r_intr1___spu0_9___lsb 17 +#define reg_iop_sw_cpu_r_intr1___spu0_9___width 1 +#define reg_iop_sw_cpu_r_intr1___spu0_9___bit 17 +#define reg_iop_sw_cpu_r_intr1___spu0_10___lsb 18 +#define reg_iop_sw_cpu_r_intr1___spu0_10___width 1 +#define reg_iop_sw_cpu_r_intr1___spu0_10___bit 18 +#define reg_iop_sw_cpu_r_intr1___spu0_11___lsb 19 +#define reg_iop_sw_cpu_r_intr1___spu0_11___width 1 +#define reg_iop_sw_cpu_r_intr1___spu0_11___bit 19 +#define reg_iop_sw_cpu_r_intr1___spu0_12___lsb 20 +#define reg_iop_sw_cpu_r_intr1___spu0_12___width 1 +#define reg_iop_sw_cpu_r_intr1___spu0_12___bit 20 +#define reg_iop_sw_cpu_r_intr1___spu0_13___lsb 21 +#define reg_iop_sw_cpu_r_intr1___spu0_13___width 1 +#define reg_iop_sw_cpu_r_intr1___spu0_13___bit 21 +#define reg_iop_sw_cpu_r_intr1___spu0_14___lsb 22 +#define reg_iop_sw_cpu_r_intr1___spu0_14___width 1 +#define reg_iop_sw_cpu_r_intr1___spu0_14___bit 22 +#define reg_iop_sw_cpu_r_intr1___spu0_15___lsb 23 +#define reg_iop_sw_cpu_r_intr1___spu0_15___width 1 +#define reg_iop_sw_cpu_r_intr1___spu0_15___bit 23 +#define reg_iop_sw_cpu_r_intr1___spu1_0___lsb 24 +#define reg_iop_sw_cpu_r_intr1___spu1_0___width 1 +#define reg_iop_sw_cpu_r_intr1___spu1_0___bit 24 +#define reg_iop_sw_cpu_r_intr1___spu1_1___lsb 25 +#define reg_iop_sw_cpu_r_intr1___spu1_1___width 1 +#define reg_iop_sw_cpu_r_intr1___spu1_1___bit 25 +#define reg_iop_sw_cpu_r_intr1___spu1_2___lsb 26 +#define reg_iop_sw_cpu_r_intr1___spu1_2___width 1 +#define reg_iop_sw_cpu_r_intr1___spu1_2___bit 26 +#define reg_iop_sw_cpu_r_intr1___spu1_3___lsb 27 +#define reg_iop_sw_cpu_r_intr1___spu1_3___width 1 +#define reg_iop_sw_cpu_r_intr1___spu1_3___bit 27 +#define reg_iop_sw_cpu_r_intr1___spu1_4___lsb 28 +#define reg_iop_sw_cpu_r_intr1___spu1_4___width 1 +#define reg_iop_sw_cpu_r_intr1___spu1_4___bit 28 +#define reg_iop_sw_cpu_r_intr1___spu1_5___lsb 29 +#define reg_iop_sw_cpu_r_intr1___spu1_5___width 1 +#define reg_iop_sw_cpu_r_intr1___spu1_5___bit 29 +#define reg_iop_sw_cpu_r_intr1___spu1_6___lsb 30 +#define reg_iop_sw_cpu_r_intr1___spu1_6___width 1 +#define reg_iop_sw_cpu_r_intr1___spu1_6___bit 30 +#define reg_iop_sw_cpu_r_intr1___spu1_7___lsb 31 +#define reg_iop_sw_cpu_r_intr1___spu1_7___width 1 +#define reg_iop_sw_cpu_r_intr1___spu1_7___bit 31 +#define reg_iop_sw_cpu_r_intr1_offset 108 + +/* Register r_masked_intr1, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___lsb 0 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___bit 0 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___lsb 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___bit 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___lsb 2 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___bit 2 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___lsb 3 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___bit 3 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___lsb 4 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___bit 4 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___lsb 5 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___bit 5 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___lsb 6 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___bit 6 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___lsb 7 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___bit 7 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___lsb 8 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___bit 8 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___lsb 9 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___bit 9 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___lsb 10 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___bit 10 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___lsb 11 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___bit 11 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___lsb 12 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___bit 12 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___lsb 13 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___bit 13 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___lsb 14 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___bit 14 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___lsb 15 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___bit 15 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_8___lsb 16 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_8___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_8___bit 16 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_9___lsb 17 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_9___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_9___bit 17 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_10___lsb 18 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_10___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_10___bit 18 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_11___lsb 19 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_11___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_11___bit 19 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_12___lsb 20 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_12___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_12___bit 20 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_13___lsb 21 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_13___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_13___bit 21 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_14___lsb 22 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_14___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_14___bit 22 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_15___lsb 23 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_15___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu0_15___bit 23 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_0___lsb 24 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_0___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_0___bit 24 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_1___lsb 25 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_1___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_1___bit 25 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_2___lsb 26 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_2___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_2___bit 26 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_3___lsb 27 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_3___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_3___bit 27 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_4___lsb 28 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_4___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_4___bit 28 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_5___lsb 29 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_5___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_5___bit 29 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_6___lsb 30 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_6___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_6___bit 30 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_7___lsb 31 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_7___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___spu1_7___bit 31 +#define reg_iop_sw_cpu_r_masked_intr1_offset 112 + +/* Register rw_intr2_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_0___lsb 0 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_0___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_0___bit 0 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_1___lsb 1 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_1___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_1___bit 1 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_2___lsb 2 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_2___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_2___bit 2 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_3___lsb 3 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_3___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_3___bit 3 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_4___lsb 4 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_4___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_4___bit 4 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_5___lsb 5 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_5___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_5___bit 5 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_6___lsb 6 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_6___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_6___bit 6 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_7___lsb 7 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_7___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___mpu_7___bit 7 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_0___lsb 8 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_0___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_0___bit 8 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_1___lsb 9 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_1___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_1___bit 9 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_2___lsb 10 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_2___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_2___bit 10 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_3___lsb 11 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_3___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_3___bit 11 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_4___lsb 12 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_4___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_4___bit 12 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_5___lsb 13 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_5___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_5___bit 13 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_6___lsb 14 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_6___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_6___bit 14 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_7___lsb 15 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_7___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___spu0_7___bit 15 +#define reg_iop_sw_cpu_rw_intr2_mask___dmc_in0___lsb 16 +#define reg_iop_sw_cpu_rw_intr2_mask___dmc_in0___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___dmc_in0___bit 16 +#define reg_iop_sw_cpu_rw_intr2_mask___dmc_out0___lsb 17 +#define reg_iop_sw_cpu_rw_intr2_mask___dmc_out0___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___dmc_out0___bit 17 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0___lsb 18 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0___bit 18 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0___lsb 19 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0___bit 19 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0_extra___lsb 20 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0_extra___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0_extra___bit 20 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0_extra___lsb 21 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0_extra___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0_extra___bit 21 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp0___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp1___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp2___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp3___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp4___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp5___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp6___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp7___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp0___lsb 30 +#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp0___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp0___bit 30 +#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp1___lsb 31 +#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp1___width 1 +#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp1___bit 31 +#define reg_iop_sw_cpu_rw_intr2_mask_offset 116 + +/* Register rw_ack_intr2, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_0___lsb 0 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_0___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_0___bit 0 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_1___lsb 1 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_1___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_1___bit 1 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_2___lsb 2 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_2___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_2___bit 2 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_3___lsb 3 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_3___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_3___bit 3 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_4___lsb 4 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_4___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_4___bit 4 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_5___lsb 5 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_5___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_5___bit 5 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_6___lsb 6 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_6___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_6___bit 6 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_7___lsb 7 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_7___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___mpu_7___bit 7 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_0___lsb 8 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_0___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_0___bit 8 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_1___lsb 9 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_1___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_1___bit 9 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_2___lsb 10 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_2___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_2___bit 10 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_3___lsb 11 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_3___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_3___bit 11 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_4___lsb 12 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_4___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_4___bit 12 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_5___lsb 13 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_5___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_5___bit 13 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_6___lsb 14 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_6___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_6___bit 14 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_7___lsb 15 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_7___width 1 +#define reg_iop_sw_cpu_rw_ack_intr2___spu0_7___bit 15 +#define reg_iop_sw_cpu_rw_ack_intr2_offset 120 + +/* Register r_intr2, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_intr2___mpu_0___lsb 0 +#define reg_iop_sw_cpu_r_intr2___mpu_0___width 1 +#define reg_iop_sw_cpu_r_intr2___mpu_0___bit 0 +#define reg_iop_sw_cpu_r_intr2___mpu_1___lsb 1 +#define reg_iop_sw_cpu_r_intr2___mpu_1___width 1 +#define reg_iop_sw_cpu_r_intr2___mpu_1___bit 1 +#define reg_iop_sw_cpu_r_intr2___mpu_2___lsb 2 +#define reg_iop_sw_cpu_r_intr2___mpu_2___width 1 +#define reg_iop_sw_cpu_r_intr2___mpu_2___bit 2 +#define reg_iop_sw_cpu_r_intr2___mpu_3___lsb 3 +#define reg_iop_sw_cpu_r_intr2___mpu_3___width 1 +#define reg_iop_sw_cpu_r_intr2___mpu_3___bit 3 +#define reg_iop_sw_cpu_r_intr2___mpu_4___lsb 4 +#define reg_iop_sw_cpu_r_intr2___mpu_4___width 1 +#define reg_iop_sw_cpu_r_intr2___mpu_4___bit 4 +#define reg_iop_sw_cpu_r_intr2___mpu_5___lsb 5 +#define reg_iop_sw_cpu_r_intr2___mpu_5___width 1 +#define reg_iop_sw_cpu_r_intr2___mpu_5___bit 5 +#define reg_iop_sw_cpu_r_intr2___mpu_6___lsb 6 +#define reg_iop_sw_cpu_r_intr2___mpu_6___width 1 +#define reg_iop_sw_cpu_r_intr2___mpu_6___bit 6 +#define reg_iop_sw_cpu_r_intr2___mpu_7___lsb 7 +#define reg_iop_sw_cpu_r_intr2___mpu_7___width 1 +#define reg_iop_sw_cpu_r_intr2___mpu_7___bit 7 +#define reg_iop_sw_cpu_r_intr2___spu0_0___lsb 8 +#define reg_iop_sw_cpu_r_intr2___spu0_0___width 1 +#define reg_iop_sw_cpu_r_intr2___spu0_0___bit 8 +#define reg_iop_sw_cpu_r_intr2___spu0_1___lsb 9 +#define reg_iop_sw_cpu_r_intr2___spu0_1___width 1 +#define reg_iop_sw_cpu_r_intr2___spu0_1___bit 9 +#define reg_iop_sw_cpu_r_intr2___spu0_2___lsb 10 +#define reg_iop_sw_cpu_r_intr2___spu0_2___width 1 +#define reg_iop_sw_cpu_r_intr2___spu0_2___bit 10 +#define reg_iop_sw_cpu_r_intr2___spu0_3___lsb 11 +#define reg_iop_sw_cpu_r_intr2___spu0_3___width 1 +#define reg_iop_sw_cpu_r_intr2___spu0_3___bit 11 +#define reg_iop_sw_cpu_r_intr2___spu0_4___lsb 12 +#define reg_iop_sw_cpu_r_intr2___spu0_4___width 1 +#define reg_iop_sw_cpu_r_intr2___spu0_4___bit 12 +#define reg_iop_sw_cpu_r_intr2___spu0_5___lsb 13 +#define reg_iop_sw_cpu_r_intr2___spu0_5___width 1 +#define reg_iop_sw_cpu_r_intr2___spu0_5___bit 13 +#define reg_iop_sw_cpu_r_intr2___spu0_6___lsb 14 +#define reg_iop_sw_cpu_r_intr2___spu0_6___width 1 +#define reg_iop_sw_cpu_r_intr2___spu0_6___bit 14 +#define reg_iop_sw_cpu_r_intr2___spu0_7___lsb 15 +#define reg_iop_sw_cpu_r_intr2___spu0_7___width 1 +#define reg_iop_sw_cpu_r_intr2___spu0_7___bit 15 +#define reg_iop_sw_cpu_r_intr2___dmc_in0___lsb 16 +#define reg_iop_sw_cpu_r_intr2___dmc_in0___width 1 +#define reg_iop_sw_cpu_r_intr2___dmc_in0___bit 16 +#define reg_iop_sw_cpu_r_intr2___dmc_out0___lsb 17 +#define reg_iop_sw_cpu_r_intr2___dmc_out0___width 1 +#define reg_iop_sw_cpu_r_intr2___dmc_out0___bit 17 +#define reg_iop_sw_cpu_r_intr2___fifo_in0___lsb 18 +#define reg_iop_sw_cpu_r_intr2___fifo_in0___width 1 +#define reg_iop_sw_cpu_r_intr2___fifo_in0___bit 18 +#define reg_iop_sw_cpu_r_intr2___fifo_out0___lsb 19 +#define reg_iop_sw_cpu_r_intr2___fifo_out0___width 1 +#define reg_iop_sw_cpu_r_intr2___fifo_out0___bit 19 +#define reg_iop_sw_cpu_r_intr2___fifo_in0_extra___lsb 20 +#define reg_iop_sw_cpu_r_intr2___fifo_in0_extra___width 1 +#define reg_iop_sw_cpu_r_intr2___fifo_in0_extra___bit 20 +#define reg_iop_sw_cpu_r_intr2___fifo_out0_extra___lsb 21 +#define reg_iop_sw_cpu_r_intr2___fifo_out0_extra___width 1 +#define reg_iop_sw_cpu_r_intr2___fifo_out0_extra___bit 21 +#define reg_iop_sw_cpu_r_intr2___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_r_intr2___trigger_grp0___width 1 +#define reg_iop_sw_cpu_r_intr2___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_r_intr2___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_r_intr2___trigger_grp1___width 1 +#define reg_iop_sw_cpu_r_intr2___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_r_intr2___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_r_intr2___trigger_grp2___width 1 +#define reg_iop_sw_cpu_r_intr2___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_r_intr2___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_r_intr2___trigger_grp3___width 1 +#define reg_iop_sw_cpu_r_intr2___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_r_intr2___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_r_intr2___trigger_grp4___width 1 +#define reg_iop_sw_cpu_r_intr2___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_r_intr2___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_r_intr2___trigger_grp5___width 1 +#define reg_iop_sw_cpu_r_intr2___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_r_intr2___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_r_intr2___trigger_grp6___width 1 +#define reg_iop_sw_cpu_r_intr2___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_r_intr2___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_r_intr2___trigger_grp7___width 1 +#define reg_iop_sw_cpu_r_intr2___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_r_intr2___timer_grp0___lsb 30 +#define reg_iop_sw_cpu_r_intr2___timer_grp0___width 1 +#define reg_iop_sw_cpu_r_intr2___timer_grp0___bit 30 +#define reg_iop_sw_cpu_r_intr2___timer_grp1___lsb 31 +#define reg_iop_sw_cpu_r_intr2___timer_grp1___width 1 +#define reg_iop_sw_cpu_r_intr2___timer_grp1___bit 31 +#define reg_iop_sw_cpu_r_intr2_offset 124 + +/* Register r_masked_intr2, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_masked_intr2___mpu_0___lsb 0 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_0___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_0___bit 0 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_1___lsb 1 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_1___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_1___bit 1 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_2___lsb 2 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_2___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_2___bit 2 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_3___lsb 3 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_3___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_3___bit 3 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_4___lsb 4 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_4___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_4___bit 4 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_5___lsb 5 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_5___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_5___bit 5 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_6___lsb 6 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_6___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_6___bit 6 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_7___lsb 7 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_7___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___mpu_7___bit 7 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_0___lsb 8 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_0___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_0___bit 8 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_1___lsb 9 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_1___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_1___bit 9 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_2___lsb 10 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_2___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_2___bit 10 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_3___lsb 11 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_3___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_3___bit 11 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_4___lsb 12 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_4___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_4___bit 12 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_5___lsb 13 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_5___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_5___bit 13 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_6___lsb 14 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_6___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_6___bit 14 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_7___lsb 15 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_7___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___spu0_7___bit 15 +#define reg_iop_sw_cpu_r_masked_intr2___dmc_in0___lsb 16 +#define reg_iop_sw_cpu_r_masked_intr2___dmc_in0___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___dmc_in0___bit 16 +#define reg_iop_sw_cpu_r_masked_intr2___dmc_out0___lsb 17 +#define reg_iop_sw_cpu_r_masked_intr2___dmc_out0___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___dmc_out0___bit 17 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0___lsb 18 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0___bit 18 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0___lsb 19 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0___bit 19 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0_extra___lsb 20 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0_extra___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0_extra___bit 20 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0_extra___lsb 21 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0_extra___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0_extra___bit 21 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp0___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp1___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp2___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp3___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp4___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp5___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp6___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp7___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_r_masked_intr2___timer_grp0___lsb 30 +#define reg_iop_sw_cpu_r_masked_intr2___timer_grp0___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___timer_grp0___bit 30 +#define reg_iop_sw_cpu_r_masked_intr2___timer_grp1___lsb 31 +#define reg_iop_sw_cpu_r_masked_intr2___timer_grp1___width 1 +#define reg_iop_sw_cpu_r_masked_intr2___timer_grp1___bit 31 +#define reg_iop_sw_cpu_r_masked_intr2_offset 128 + +/* Register rw_intr3_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_16___lsb 0 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_16___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_16___bit 0 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_17___lsb 1 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_17___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_17___bit 1 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_18___lsb 2 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_18___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_18___bit 2 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_19___lsb 3 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_19___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_19___bit 3 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_20___lsb 4 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_20___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_20___bit 4 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_21___lsb 5 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_21___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_21___bit 5 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_22___lsb 6 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_22___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_22___bit 6 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_23___lsb 7 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_23___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___mpu_23___bit 7 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_0___lsb 8 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_0___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_0___bit 8 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_1___lsb 9 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_1___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_1___bit 9 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_2___lsb 10 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_2___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_2___bit 10 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_3___lsb 11 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_3___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_3___bit 11 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_4___lsb 12 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_4___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_4___bit 12 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_5___lsb 13 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_5___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_5___bit 13 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_6___lsb 14 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_6___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_6___bit 14 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_7___lsb 15 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_7___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___spu1_7___bit 15 +#define reg_iop_sw_cpu_rw_intr3_mask___dmc_in1___lsb 16 +#define reg_iop_sw_cpu_rw_intr3_mask___dmc_in1___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___dmc_in1___bit 16 +#define reg_iop_sw_cpu_rw_intr3_mask___dmc_out1___lsb 17 +#define reg_iop_sw_cpu_rw_intr3_mask___dmc_out1___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___dmc_out1___bit 17 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1___lsb 18 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1___bit 18 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1___lsb 19 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1___bit 19 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1_extra___lsb 20 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1_extra___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1_extra___bit 20 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1_extra___lsb 21 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1_extra___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1_extra___bit 21 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp0___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp1___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp2___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp3___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp4___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp5___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp6___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp7___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp2___lsb 30 +#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp2___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp2___bit 30 +#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp3___lsb 31 +#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp3___width 1 +#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp3___bit 31 +#define reg_iop_sw_cpu_rw_intr3_mask_offset 132 + +/* Register rw_ack_intr3, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_16___lsb 0 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_16___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_16___bit 0 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_17___lsb 1 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_17___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_17___bit 1 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_18___lsb 2 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_18___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_18___bit 2 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_19___lsb 3 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_19___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_19___bit 3 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_20___lsb 4 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_20___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_20___bit 4 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_21___lsb 5 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_21___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_21___bit 5 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_22___lsb 6 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_22___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_22___bit 6 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_23___lsb 7 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_23___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___mpu_23___bit 7 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_0___lsb 8 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_0___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_0___bit 8 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_1___lsb 9 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_1___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_1___bit 9 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_2___lsb 10 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_2___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_2___bit 10 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_3___lsb 11 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_3___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_3___bit 11 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_4___lsb 12 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_4___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_4___bit 12 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_5___lsb 13 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_5___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_5___bit 13 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_6___lsb 14 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_6___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_6___bit 14 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_7___lsb 15 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_7___width 1 +#define reg_iop_sw_cpu_rw_ack_intr3___spu1_7___bit 15 +#define reg_iop_sw_cpu_rw_ack_intr3_offset 136 + +/* Register r_intr3, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_intr3___mpu_16___lsb 0 +#define reg_iop_sw_cpu_r_intr3___mpu_16___width 1 +#define reg_iop_sw_cpu_r_intr3___mpu_16___bit 0 +#define reg_iop_sw_cpu_r_intr3___mpu_17___lsb 1 +#define reg_iop_sw_cpu_r_intr3___mpu_17___width 1 +#define reg_iop_sw_cpu_r_intr3___mpu_17___bit 1 +#define reg_iop_sw_cpu_r_intr3___mpu_18___lsb 2 +#define reg_iop_sw_cpu_r_intr3___mpu_18___width 1 +#define reg_iop_sw_cpu_r_intr3___mpu_18___bit 2 +#define reg_iop_sw_cpu_r_intr3___mpu_19___lsb 3 +#define reg_iop_sw_cpu_r_intr3___mpu_19___width 1 +#define reg_iop_sw_cpu_r_intr3___mpu_19___bit 3 +#define reg_iop_sw_cpu_r_intr3___mpu_20___lsb 4 +#define reg_iop_sw_cpu_r_intr3___mpu_20___width 1 +#define reg_iop_sw_cpu_r_intr3___mpu_20___bit 4 +#define reg_iop_sw_cpu_r_intr3___mpu_21___lsb 5 +#define reg_iop_sw_cpu_r_intr3___mpu_21___width 1 +#define reg_iop_sw_cpu_r_intr3___mpu_21___bit 5 +#define reg_iop_sw_cpu_r_intr3___mpu_22___lsb 6 +#define reg_iop_sw_cpu_r_intr3___mpu_22___width 1 +#define reg_iop_sw_cpu_r_intr3___mpu_22___bit 6 +#define reg_iop_sw_cpu_r_intr3___mpu_23___lsb 7 +#define reg_iop_sw_cpu_r_intr3___mpu_23___width 1 +#define reg_iop_sw_cpu_r_intr3___mpu_23___bit 7 +#define reg_iop_sw_cpu_r_intr3___spu1_0___lsb 8 +#define reg_iop_sw_cpu_r_intr3___spu1_0___width 1 +#define reg_iop_sw_cpu_r_intr3___spu1_0___bit 8 +#define reg_iop_sw_cpu_r_intr3___spu1_1___lsb 9 +#define reg_iop_sw_cpu_r_intr3___spu1_1___width 1 +#define reg_iop_sw_cpu_r_intr3___spu1_1___bit 9 +#define reg_iop_sw_cpu_r_intr3___spu1_2___lsb 10 +#define reg_iop_sw_cpu_r_intr3___spu1_2___width 1 +#define reg_iop_sw_cpu_r_intr3___spu1_2___bit 10 +#define reg_iop_sw_cpu_r_intr3___spu1_3___lsb 11 +#define reg_iop_sw_cpu_r_intr3___spu1_3___width 1 +#define reg_iop_sw_cpu_r_intr3___spu1_3___bit 11 +#define reg_iop_sw_cpu_r_intr3___spu1_4___lsb 12 +#define reg_iop_sw_cpu_r_intr3___spu1_4___width 1 +#define reg_iop_sw_cpu_r_intr3___spu1_4___bit 12 +#define reg_iop_sw_cpu_r_intr3___spu1_5___lsb 13 +#define reg_iop_sw_cpu_r_intr3___spu1_5___width 1 +#define reg_iop_sw_cpu_r_intr3___spu1_5___bit 13 +#define reg_iop_sw_cpu_r_intr3___spu1_6___lsb 14 +#define reg_iop_sw_cpu_r_intr3___spu1_6___width 1 +#define reg_iop_sw_cpu_r_intr3___spu1_6___bit 14 +#define reg_iop_sw_cpu_r_intr3___spu1_7___lsb 15 +#define reg_iop_sw_cpu_r_intr3___spu1_7___width 1 +#define reg_iop_sw_cpu_r_intr3___spu1_7___bit 15 +#define reg_iop_sw_cpu_r_intr3___dmc_in1___lsb 16 +#define reg_iop_sw_cpu_r_intr3___dmc_in1___width 1 +#define reg_iop_sw_cpu_r_intr3___dmc_in1___bit 16 +#define reg_iop_sw_cpu_r_intr3___dmc_out1___lsb 17 +#define reg_iop_sw_cpu_r_intr3___dmc_out1___width 1 +#define reg_iop_sw_cpu_r_intr3___dmc_out1___bit 17 +#define reg_iop_sw_cpu_r_intr3___fifo_in1___lsb 18 +#define reg_iop_sw_cpu_r_intr3___fifo_in1___width 1 +#define reg_iop_sw_cpu_r_intr3___fifo_in1___bit 18 +#define reg_iop_sw_cpu_r_intr3___fifo_out1___lsb 19 +#define reg_iop_sw_cpu_r_intr3___fifo_out1___width 1 +#define reg_iop_sw_cpu_r_intr3___fifo_out1___bit 19 +#define reg_iop_sw_cpu_r_intr3___fifo_in1_extra___lsb 20 +#define reg_iop_sw_cpu_r_intr3___fifo_in1_extra___width 1 +#define reg_iop_sw_cpu_r_intr3___fifo_in1_extra___bit 20 +#define reg_iop_sw_cpu_r_intr3___fifo_out1_extra___lsb 21 +#define reg_iop_sw_cpu_r_intr3___fifo_out1_extra___width 1 +#define reg_iop_sw_cpu_r_intr3___fifo_out1_extra___bit 21 +#define reg_iop_sw_cpu_r_intr3___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_r_intr3___trigger_grp0___width 1 +#define reg_iop_sw_cpu_r_intr3___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_r_intr3___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_r_intr3___trigger_grp1___width 1 +#define reg_iop_sw_cpu_r_intr3___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_r_intr3___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_r_intr3___trigger_grp2___width 1 +#define reg_iop_sw_cpu_r_intr3___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_r_intr3___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_r_intr3___trigger_grp3___width 1 +#define reg_iop_sw_cpu_r_intr3___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_r_intr3___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_r_intr3___trigger_grp4___width 1 +#define reg_iop_sw_cpu_r_intr3___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_r_intr3___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_r_intr3___trigger_grp5___width 1 +#define reg_iop_sw_cpu_r_intr3___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_r_intr3___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_r_intr3___trigger_grp6___width 1 +#define reg_iop_sw_cpu_r_intr3___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_r_intr3___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_r_intr3___trigger_grp7___width 1 +#define reg_iop_sw_cpu_r_intr3___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_r_intr3___timer_grp2___lsb 30 +#define reg_iop_sw_cpu_r_intr3___timer_grp2___width 1 +#define reg_iop_sw_cpu_r_intr3___timer_grp2___bit 30 +#define reg_iop_sw_cpu_r_intr3___timer_grp3___lsb 31 +#define reg_iop_sw_cpu_r_intr3___timer_grp3___width 1 +#define reg_iop_sw_cpu_r_intr3___timer_grp3___bit 31 +#define reg_iop_sw_cpu_r_intr3_offset 140 + +/* Register r_masked_intr3, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_masked_intr3___mpu_16___lsb 0 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_16___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_16___bit 0 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_17___lsb 1 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_17___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_17___bit 1 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_18___lsb 2 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_18___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_18___bit 2 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_19___lsb 3 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_19___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_19___bit 3 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_20___lsb 4 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_20___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_20___bit 4 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_21___lsb 5 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_21___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_21___bit 5 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_22___lsb 6 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_22___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_22___bit 6 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_23___lsb 7 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_23___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___mpu_23___bit 7 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_0___lsb 8 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_0___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_0___bit 8 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_1___lsb 9 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_1___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_1___bit 9 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_2___lsb 10 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_2___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_2___bit 10 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_3___lsb 11 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_3___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_3___bit 11 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_4___lsb 12 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_4___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_4___bit 12 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_5___lsb 13 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_5___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_5___bit 13 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_6___lsb 14 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_6___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_6___bit 14 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_7___lsb 15 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_7___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___spu1_7___bit 15 +#define reg_iop_sw_cpu_r_masked_intr3___dmc_in1___lsb 16 +#define reg_iop_sw_cpu_r_masked_intr3___dmc_in1___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___dmc_in1___bit 16 +#define reg_iop_sw_cpu_r_masked_intr3___dmc_out1___lsb 17 +#define reg_iop_sw_cpu_r_masked_intr3___dmc_out1___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___dmc_out1___bit 17 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1___lsb 18 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1___bit 18 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1___lsb 19 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1___bit 19 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1_extra___lsb 20 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1_extra___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1_extra___bit 20 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1_extra___lsb 21 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1_extra___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1_extra___bit 21 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp0___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp1___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp2___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp3___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp4___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp5___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp6___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp7___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_r_masked_intr3___timer_grp2___lsb 30 +#define reg_iop_sw_cpu_r_masked_intr3___timer_grp2___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___timer_grp2___bit 30 +#define reg_iop_sw_cpu_r_masked_intr3___timer_grp3___lsb 31 +#define reg_iop_sw_cpu_r_masked_intr3___timer_grp3___width 1 +#define reg_iop_sw_cpu_r_masked_intr3___timer_grp3___bit 31 +#define reg_iop_sw_cpu_r_masked_intr3_offset 144 + + +/* Constants */ +#define regk_iop_sw_cpu_copy 0x00000000 +#define regk_iop_sw_cpu_no 0x00000000 +#define regk_iop_sw_cpu_rd 0x00000002 +#define regk_iop_sw_cpu_reg_copy 0x00000001 +#define regk_iop_sw_cpu_rw_bus0_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus0_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus0_oe_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus0_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus1_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus1_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus1_oe_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus1_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_oe_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_intr0_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_intr1_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_intr2_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_intr3_mask_default 0x00000000 +#define regk_iop_sw_cpu_wr 0x00000003 +#define regk_iop_sw_cpu_yes 0x00000001 +#endif /* __iop_sw_cpu_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_mpu_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_mpu_defs_asm.h new file mode 100644 index 000000000000..ee7dc0435b59 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_mpu_defs_asm.h @@ -0,0 +1,1776 @@ +#ifndef __iop_sw_mpu_defs_asm_h +#define __iop_sw_mpu_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r + * id: + * last modfied: Mon Apr 11 16:10:19 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_mpu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r + * id: $Id: iop_sw_mpu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_sw_cfg_owner, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_sw_cfg_owner___cfg___lsb 0 +#define reg_iop_sw_mpu_rw_sw_cfg_owner___cfg___width 2 +#define reg_iop_sw_mpu_rw_sw_cfg_owner_offset 0 + +/* Register rw_mc_ctrl, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___lsb 0 +#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___width 1 +#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___bit 0 +#define reg_iop_sw_mpu_rw_mc_ctrl___cmd___lsb 1 +#define reg_iop_sw_mpu_rw_mc_ctrl___cmd___width 2 +#define reg_iop_sw_mpu_rw_mc_ctrl___size___lsb 3 +#define reg_iop_sw_mpu_rw_mc_ctrl___size___width 3 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu0_mem___lsb 6 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu0_mem___width 1 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu0_mem___bit 6 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu1_mem___lsb 7 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu1_mem___width 1 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu1_mem___bit 7 +#define reg_iop_sw_mpu_rw_mc_ctrl_offset 4 + +/* Register rw_mc_data, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_mc_data___val___lsb 0 +#define reg_iop_sw_mpu_rw_mc_data___val___width 32 +#define reg_iop_sw_mpu_rw_mc_data_offset 8 + +/* Register rw_mc_addr, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_mc_addr_offset 12 + +/* Register rs_mc_data, scope iop_sw_mpu, type rs */ +#define reg_iop_sw_mpu_rs_mc_data_offset 16 + +/* Register r_mc_data, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_mc_data_offset 20 + +/* Register r_mc_stat, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___lsb 0 +#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___bit 0 +#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___lsb 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___bit 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu0___lsb 2 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu0___width 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu0___bit 2 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu1___lsb 3 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu1___width 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu1___bit 3 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___lsb 4 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___bit 4 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___lsb 5 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___bit 5 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu0___lsb 6 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu0___width 1 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu0___bit 6 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu1___lsb 7 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu1___width 1 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu1___bit 7 +#define reg_iop_sw_mpu_r_mc_stat_offset 24 + +/* Register rw_bus0_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte0___width 8 +#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte1___lsb 8 +#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte1___width 8 +#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte2___lsb 16 +#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte2___width 8 +#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte3___lsb 24 +#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte3___width 8 +#define reg_iop_sw_mpu_rw_bus0_clr_mask_offset 28 + +/* Register rw_bus0_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus0_set_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus0_set_mask___byte0___width 8 +#define reg_iop_sw_mpu_rw_bus0_set_mask___byte1___lsb 8 +#define reg_iop_sw_mpu_rw_bus0_set_mask___byte1___width 8 +#define reg_iop_sw_mpu_rw_bus0_set_mask___byte2___lsb 16 +#define reg_iop_sw_mpu_rw_bus0_set_mask___byte2___width 8 +#define reg_iop_sw_mpu_rw_bus0_set_mask___byte3___lsb 24 +#define reg_iop_sw_mpu_rw_bus0_set_mask___byte3___width 8 +#define reg_iop_sw_mpu_rw_bus0_set_mask_offset 32 + +/* Register rw_bus0_oe_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask_offset 36 + +/* Register rw_bus0_oe_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte0___width 1 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte1___width 1 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte2___width 1 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte3___width 1 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_mpu_rw_bus0_oe_set_mask_offset 40 + +/* Register r_bus0_in, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_bus0_in_offset 44 + +/* Register rw_bus1_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte0___width 8 +#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte1___lsb 8 +#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte1___width 8 +#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte2___lsb 16 +#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte2___width 8 +#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte3___lsb 24 +#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte3___width 8 +#define reg_iop_sw_mpu_rw_bus1_clr_mask_offset 48 + +/* Register rw_bus1_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus1_set_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus1_set_mask___byte0___width 8 +#define reg_iop_sw_mpu_rw_bus1_set_mask___byte1___lsb 8 +#define reg_iop_sw_mpu_rw_bus1_set_mask___byte1___width 8 +#define reg_iop_sw_mpu_rw_bus1_set_mask___byte2___lsb 16 +#define reg_iop_sw_mpu_rw_bus1_set_mask___byte2___width 8 +#define reg_iop_sw_mpu_rw_bus1_set_mask___byte3___lsb 24 +#define reg_iop_sw_mpu_rw_bus1_set_mask___byte3___width 8 +#define reg_iop_sw_mpu_rw_bus1_set_mask_offset 52 + +/* Register rw_bus1_oe_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask_offset 56 + +/* Register rw_bus1_oe_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte0___width 1 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte1___width 1 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte2___width 1 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte3___width 1 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_mpu_rw_bus1_oe_set_mask_offset 60 + +/* Register r_bus1_in, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_bus1_in_offset 64 + +/* Register rw_gio_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_clr_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_clr_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_clr_mask_offset 68 + +/* Register rw_gio_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_set_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_set_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_set_mask_offset 72 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_oe_clr_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_oe_clr_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_oe_clr_mask_offset 76 + +/* Register rw_gio_oe_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_oe_set_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_oe_set_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_oe_set_mask_offset 80 + +/* Register r_gio_in, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_gio_in_offset 84 + +/* Register rw_cpu_intr, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_mpu_rw_cpu_intr___intr0___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr0___bit 0 +#define reg_iop_sw_mpu_rw_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr1___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr1___bit 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_mpu_rw_cpu_intr___intr2___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr2___bit 2 +#define reg_iop_sw_mpu_rw_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_mpu_rw_cpu_intr___intr3___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr3___bit 3 +#define reg_iop_sw_mpu_rw_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_mpu_rw_cpu_intr___intr4___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr4___bit 4 +#define reg_iop_sw_mpu_rw_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_mpu_rw_cpu_intr___intr5___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr5___bit 5 +#define reg_iop_sw_mpu_rw_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_mpu_rw_cpu_intr___intr6___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr6___bit 6 +#define reg_iop_sw_mpu_rw_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_mpu_rw_cpu_intr___intr7___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr7___bit 7 +#define reg_iop_sw_mpu_rw_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_mpu_rw_cpu_intr___intr8___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr8___bit 8 +#define reg_iop_sw_mpu_rw_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_mpu_rw_cpu_intr___intr9___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr9___bit 9 +#define reg_iop_sw_mpu_rw_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_mpu_rw_cpu_intr___intr10___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr10___bit 10 +#define reg_iop_sw_mpu_rw_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_mpu_rw_cpu_intr___intr11___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr11___bit 11 +#define reg_iop_sw_mpu_rw_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_mpu_rw_cpu_intr___intr12___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr12___bit 12 +#define reg_iop_sw_mpu_rw_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_mpu_rw_cpu_intr___intr13___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr13___bit 13 +#define reg_iop_sw_mpu_rw_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_mpu_rw_cpu_intr___intr14___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr14___bit 14 +#define reg_iop_sw_mpu_rw_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_mpu_rw_cpu_intr___intr15___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr15___bit 15 +#define reg_iop_sw_mpu_rw_cpu_intr___intr16___lsb 16 +#define reg_iop_sw_mpu_rw_cpu_intr___intr16___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr16___bit 16 +#define reg_iop_sw_mpu_rw_cpu_intr___intr17___lsb 17 +#define reg_iop_sw_mpu_rw_cpu_intr___intr17___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr17___bit 17 +#define reg_iop_sw_mpu_rw_cpu_intr___intr18___lsb 18 +#define reg_iop_sw_mpu_rw_cpu_intr___intr18___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr18___bit 18 +#define reg_iop_sw_mpu_rw_cpu_intr___intr19___lsb 19 +#define reg_iop_sw_mpu_rw_cpu_intr___intr19___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr19___bit 19 +#define reg_iop_sw_mpu_rw_cpu_intr___intr20___lsb 20 +#define reg_iop_sw_mpu_rw_cpu_intr___intr20___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr20___bit 20 +#define reg_iop_sw_mpu_rw_cpu_intr___intr21___lsb 21 +#define reg_iop_sw_mpu_rw_cpu_intr___intr21___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr21___bit 21 +#define reg_iop_sw_mpu_rw_cpu_intr___intr22___lsb 22 +#define reg_iop_sw_mpu_rw_cpu_intr___intr22___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr22___bit 22 +#define reg_iop_sw_mpu_rw_cpu_intr___intr23___lsb 23 +#define reg_iop_sw_mpu_rw_cpu_intr___intr23___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr23___bit 23 +#define reg_iop_sw_mpu_rw_cpu_intr___intr24___lsb 24 +#define reg_iop_sw_mpu_rw_cpu_intr___intr24___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr24___bit 24 +#define reg_iop_sw_mpu_rw_cpu_intr___intr25___lsb 25 +#define reg_iop_sw_mpu_rw_cpu_intr___intr25___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr25___bit 25 +#define reg_iop_sw_mpu_rw_cpu_intr___intr26___lsb 26 +#define reg_iop_sw_mpu_rw_cpu_intr___intr26___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr26___bit 26 +#define reg_iop_sw_mpu_rw_cpu_intr___intr27___lsb 27 +#define reg_iop_sw_mpu_rw_cpu_intr___intr27___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr27___bit 27 +#define reg_iop_sw_mpu_rw_cpu_intr___intr28___lsb 28 +#define reg_iop_sw_mpu_rw_cpu_intr___intr28___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr28___bit 28 +#define reg_iop_sw_mpu_rw_cpu_intr___intr29___lsb 29 +#define reg_iop_sw_mpu_rw_cpu_intr___intr29___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr29___bit 29 +#define reg_iop_sw_mpu_rw_cpu_intr___intr30___lsb 30 +#define reg_iop_sw_mpu_rw_cpu_intr___intr30___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr30___bit 30 +#define reg_iop_sw_mpu_rw_cpu_intr___intr31___lsb 31 +#define reg_iop_sw_mpu_rw_cpu_intr___intr31___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr31___bit 31 +#define reg_iop_sw_mpu_rw_cpu_intr_offset 88 + +/* Register r_cpu_intr, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_mpu_r_cpu_intr___intr0___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr0___bit 0 +#define reg_iop_sw_mpu_r_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr1___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr1___bit 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_mpu_r_cpu_intr___intr2___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr2___bit 2 +#define reg_iop_sw_mpu_r_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_mpu_r_cpu_intr___intr3___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr3___bit 3 +#define reg_iop_sw_mpu_r_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_mpu_r_cpu_intr___intr4___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr4___bit 4 +#define reg_iop_sw_mpu_r_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_mpu_r_cpu_intr___intr5___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr5___bit 5 +#define reg_iop_sw_mpu_r_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_mpu_r_cpu_intr___intr6___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr6___bit 6 +#define reg_iop_sw_mpu_r_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_mpu_r_cpu_intr___intr7___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr7___bit 7 +#define reg_iop_sw_mpu_r_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_mpu_r_cpu_intr___intr8___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr8___bit 8 +#define reg_iop_sw_mpu_r_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_mpu_r_cpu_intr___intr9___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr9___bit 9 +#define reg_iop_sw_mpu_r_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_mpu_r_cpu_intr___intr10___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr10___bit 10 +#define reg_iop_sw_mpu_r_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_mpu_r_cpu_intr___intr11___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr11___bit 11 +#define reg_iop_sw_mpu_r_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_mpu_r_cpu_intr___intr12___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr12___bit 12 +#define reg_iop_sw_mpu_r_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_mpu_r_cpu_intr___intr13___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr13___bit 13 +#define reg_iop_sw_mpu_r_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_mpu_r_cpu_intr___intr14___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr14___bit 14 +#define reg_iop_sw_mpu_r_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_mpu_r_cpu_intr___intr15___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr15___bit 15 +#define reg_iop_sw_mpu_r_cpu_intr___intr16___lsb 16 +#define reg_iop_sw_mpu_r_cpu_intr___intr16___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr16___bit 16 +#define reg_iop_sw_mpu_r_cpu_intr___intr17___lsb 17 +#define reg_iop_sw_mpu_r_cpu_intr___intr17___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr17___bit 17 +#define reg_iop_sw_mpu_r_cpu_intr___intr18___lsb 18 +#define reg_iop_sw_mpu_r_cpu_intr___intr18___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr18___bit 18 +#define reg_iop_sw_mpu_r_cpu_intr___intr19___lsb 19 +#define reg_iop_sw_mpu_r_cpu_intr___intr19___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr19___bit 19 +#define reg_iop_sw_mpu_r_cpu_intr___intr20___lsb 20 +#define reg_iop_sw_mpu_r_cpu_intr___intr20___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr20___bit 20 +#define reg_iop_sw_mpu_r_cpu_intr___intr21___lsb 21 +#define reg_iop_sw_mpu_r_cpu_intr___intr21___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr21___bit 21 +#define reg_iop_sw_mpu_r_cpu_intr___intr22___lsb 22 +#define reg_iop_sw_mpu_r_cpu_intr___intr22___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr22___bit 22 +#define reg_iop_sw_mpu_r_cpu_intr___intr23___lsb 23 +#define reg_iop_sw_mpu_r_cpu_intr___intr23___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr23___bit 23 +#define reg_iop_sw_mpu_r_cpu_intr___intr24___lsb 24 +#define reg_iop_sw_mpu_r_cpu_intr___intr24___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr24___bit 24 +#define reg_iop_sw_mpu_r_cpu_intr___intr25___lsb 25 +#define reg_iop_sw_mpu_r_cpu_intr___intr25___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr25___bit 25 +#define reg_iop_sw_mpu_r_cpu_intr___intr26___lsb 26 +#define reg_iop_sw_mpu_r_cpu_intr___intr26___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr26___bit 26 +#define reg_iop_sw_mpu_r_cpu_intr___intr27___lsb 27 +#define reg_iop_sw_mpu_r_cpu_intr___intr27___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr27___bit 27 +#define reg_iop_sw_mpu_r_cpu_intr___intr28___lsb 28 +#define reg_iop_sw_mpu_r_cpu_intr___intr28___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr28___bit 28 +#define reg_iop_sw_mpu_r_cpu_intr___intr29___lsb 29 +#define reg_iop_sw_mpu_r_cpu_intr___intr29___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr29___bit 29 +#define reg_iop_sw_mpu_r_cpu_intr___intr30___lsb 30 +#define reg_iop_sw_mpu_r_cpu_intr___intr30___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr30___bit 30 +#define reg_iop_sw_mpu_r_cpu_intr___intr31___lsb 31 +#define reg_iop_sw_mpu_r_cpu_intr___intr31___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr31___bit 31 +#define reg_iop_sw_mpu_r_cpu_intr_offset 92 + +/* Register rw_intr_grp0_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr0___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr0___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr0___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr0___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp4___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp4___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0_extra___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0_extra___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out0___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr1___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr1___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr1___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr1___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp5___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp5___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0_extra___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0_extra___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in0___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr2___lsb 16 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr2___bit 16 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr2___lsb 17 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr2___bit 17 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp6___lsb 19 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp6___bit 19 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp2___bit 20 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1___lsb 21 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1___bit 21 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1_extra___lsb 22 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1_extra___bit 22 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out1___bit 23 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr3___lsb 24 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr3___bit 24 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr3___lsb 25 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr3___bit 25 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp7___lsb 27 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp7___bit 27 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp3___bit 28 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1___lsb 29 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1___bit 29 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1_extra___lsb 30 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1_extra___bit 30 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in1___bit 31 +#define reg_iop_sw_mpu_rw_intr_grp0_mask_offset 96 + +/* Register rw_ack_intr_grp0, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr0___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr0___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr0___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr0___lsb 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr0___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr0___bit 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr1___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr1___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr1___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr1___lsb 9 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr1___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr1___bit 9 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr2___lsb 16 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr2___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr2___bit 16 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr2___lsb 17 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr2___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr2___bit 17 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr3___lsb 24 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr3___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr3___bit 24 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr3___lsb 25 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr3___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr3___bit 25 +#define reg_iop_sw_mpu_rw_ack_intr_grp0_offset 100 + +/* Register r_intr_grp0, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr0___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr0___bit 0 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr0___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr0___bit 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp4___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp4___bit 3 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___bit 4 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0___bit 5 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0_extra___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0_extra___bit 6 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out0___bit 7 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr1___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr1___bit 8 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr1___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr1___bit 9 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp5___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp5___bit 11 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___bit 12 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0___bit 13 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0_extra___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0_extra___bit 14 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in0___bit 15 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr2___lsb 16 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr2___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr2___bit 16 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr2___lsb 17 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr2___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr2___bit 17 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp6___lsb 19 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp6___bit 19 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp2___bit 20 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1___lsb 21 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1___bit 21 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1_extra___lsb 22 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1_extra___bit 22 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out1___bit 23 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr3___lsb 24 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr3___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr3___bit 24 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr3___lsb 25 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr3___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr3___bit 25 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp7___lsb 27 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp7___bit 27 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp3___bit 28 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1___lsb 29 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1___bit 29 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1_extra___lsb 30 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1_extra___bit 30 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in1___bit 31 +#define reg_iop_sw_mpu_r_intr_grp0_offset 104 + +/* Register r_masked_intr_grp0, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr0___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr0___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr0___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr0___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp4___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp4___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0_extra___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0_extra___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out0___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr1___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr1___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr1___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr1___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp5___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp5___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0_extra___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0_extra___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in0___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr2___lsb 16 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr2___bit 16 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr2___lsb 17 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr2___bit 17 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp6___lsb 19 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp6___bit 19 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp2___bit 20 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1___lsb 21 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1___bit 21 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1_extra___lsb 22 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1_extra___bit 22 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out1___bit 23 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr3___lsb 24 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr3___bit 24 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr3___lsb 25 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr3___bit 25 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp7___lsb 27 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp7___bit 27 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp3___bit 28 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1___lsb 29 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1___bit 29 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1_extra___lsb 30 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1_extra___bit 30 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in1___bit 31 +#define reg_iop_sw_mpu_r_masked_intr_grp0_offset 108 + +/* Register rw_intr_grp1_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr4___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr4___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr4___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr4___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0_extra___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0_extra___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out0___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr5___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr5___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr5___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr5___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0_extra___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0_extra___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in0___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr6___lsb 16 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr6___bit 16 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr6___lsb 17 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr6___bit 17 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___lsb 19 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___bit 19 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp2___bit 20 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1___lsb 21 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1___bit 21 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1_extra___lsb 22 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1_extra___bit 22 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out1___bit 23 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr7___lsb 24 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr7___bit 24 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr7___lsb 25 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr7___bit 25 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___lsb 27 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___bit 27 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp3___bit 28 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0___lsb 29 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0___bit 29 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1_extra___lsb 30 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1_extra___bit 30 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in1___bit 31 +#define reg_iop_sw_mpu_rw_intr_grp1_mask_offset 112 + +/* Register rw_ack_intr_grp1, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr4___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr4___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr4___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr4___lsb 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr4___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr4___bit 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr5___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr5___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr5___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr5___lsb 9 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr5___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr5___bit 9 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr6___lsb 16 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr6___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr6___bit 16 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr6___lsb 17 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr6___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr6___bit 17 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr7___lsb 24 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr7___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr7___bit 24 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr7___lsb 25 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr7___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr7___bit 25 +#define reg_iop_sw_mpu_rw_ack_intr_grp1_offset 116 + +/* Register r_intr_grp1, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr4___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr4___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr4___bit 0 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr4___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr4___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr4___bit 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___bit 3 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___bit 4 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0___bit 5 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0_extra___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0_extra___bit 6 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out0___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out0___bit 7 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr5___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr5___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr5___bit 8 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr5___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr5___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr5___bit 9 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___bit 11 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___bit 12 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1___bit 13 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0_extra___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0_extra___bit 14 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in0___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in0___bit 15 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr6___lsb 16 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr6___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr6___bit 16 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr6___lsb 17 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr6___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr6___bit 17 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___lsb 19 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___bit 19 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp2___bit 20 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1___lsb 21 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1___bit 21 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1_extra___lsb 22 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1_extra___bit 22 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out1___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out1___bit 23 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr7___lsb 24 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr7___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr7___bit 24 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr7___lsb 25 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr7___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr7___bit 25 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___lsb 27 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___bit 27 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp3___bit 28 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0___lsb 29 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0___bit 29 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1_extra___lsb 30 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1_extra___bit 30 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in1___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in1___bit 31 +#define reg_iop_sw_mpu_r_intr_grp1_offset 120 + +/* Register r_masked_intr_grp1, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr4___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr4___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr4___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr4___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0_extra___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0_extra___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out0___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr5___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr5___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr5___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr5___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0_extra___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0_extra___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in0___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr6___lsb 16 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr6___bit 16 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr6___lsb 17 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr6___bit 17 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___lsb 19 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___bit 19 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp2___bit 20 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1___lsb 21 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1___bit 21 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1_extra___lsb 22 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1_extra___bit 22 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out1___bit 23 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr7___lsb 24 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr7___bit 24 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr7___lsb 25 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr7___bit 25 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___lsb 27 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___bit 27 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp3___bit 28 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0___lsb 29 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0___bit 29 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1_extra___lsb 30 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1_extra___bit 30 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in1___bit 31 +#define reg_iop_sw_mpu_r_masked_intr_grp1_offset 124 + +/* Register rw_intr_grp2_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr8___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr8___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr8___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr8___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr8___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr8___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp6___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp6___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1_extra___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1_extra___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out0___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr9___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr9___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr9___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr9___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr9___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr9___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp7___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp7___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1_extra___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1_extra___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in0___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr10___lsb 16 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr10___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr10___bit 16 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr10___lsb 17 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr10___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr10___bit 17 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp4___lsb 19 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp4___bit 19 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp2___bit 20 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0___lsb 21 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0___bit 21 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0_extra___lsb 22 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0_extra___bit 22 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out1___bit 23 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr11___lsb 24 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr11___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr11___bit 24 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr11___lsb 25 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr11___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr11___bit 25 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp5___lsb 27 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp5___bit 27 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp3___bit 28 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0___lsb 29 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0___bit 29 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0_extra___lsb 30 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0_extra___bit 30 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in1___bit 31 +#define reg_iop_sw_mpu_rw_intr_grp2_mask_offset 128 + +/* Register rw_ack_intr_grp2, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr8___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr8___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr8___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr8___lsb 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr8___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr8___bit 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr9___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr9___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr9___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr9___lsb 9 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr9___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr9___bit 9 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr10___lsb 16 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr10___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr10___bit 16 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr10___lsb 17 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr10___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr10___bit 17 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr11___lsb 24 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr11___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr11___bit 24 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr11___lsb 25 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr11___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr11___bit 25 +#define reg_iop_sw_mpu_rw_ack_intr_grp2_offset 132 + +/* Register r_intr_grp2, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr8___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr8___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr8___bit 0 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr8___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr8___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr8___bit 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp6___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp6___bit 3 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___bit 4 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1___bit 5 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1_extra___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1_extra___bit 6 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out0___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out0___bit 7 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr9___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr9___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr9___bit 8 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr9___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr9___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr9___bit 9 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp7___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp7___bit 11 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___bit 12 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1___bit 13 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1_extra___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1_extra___bit 14 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in0___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in0___bit 15 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr10___lsb 16 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr10___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr10___bit 16 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr10___lsb 17 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr10___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr10___bit 17 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp4___lsb 19 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp4___bit 19 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp2___bit 20 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0___lsb 21 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0___bit 21 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0_extra___lsb 22 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0_extra___bit 22 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out1___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out1___bit 23 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr11___lsb 24 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr11___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr11___bit 24 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr11___lsb 25 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr11___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr11___bit 25 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp5___lsb 27 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp5___bit 27 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp3___bit 28 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0___lsb 29 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0___bit 29 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0_extra___lsb 30 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0_extra___bit 30 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in1___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in1___bit 31 +#define reg_iop_sw_mpu_r_intr_grp2_offset 136 + +/* Register r_masked_intr_grp2, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr8___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr8___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr8___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr8___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr8___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr8___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp6___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp6___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1_extra___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1_extra___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out0___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr9___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr9___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr9___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr9___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr9___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr9___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp7___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp7___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1_extra___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1_extra___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in0___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr10___lsb 16 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr10___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr10___bit 16 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr10___lsb 17 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr10___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr10___bit 17 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp4___lsb 19 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp4___bit 19 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp2___bit 20 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0___lsb 21 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0___bit 21 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0_extra___lsb 22 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0_extra___bit 22 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out1___bit 23 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr11___lsb 24 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr11___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr11___bit 24 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr11___lsb 25 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr11___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr11___bit 25 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp5___lsb 27 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp5___bit 27 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp3___bit 28 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0___lsb 29 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0___bit 29 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0_extra___lsb 30 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0_extra___bit 30 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in1___bit 31 +#define reg_iop_sw_mpu_r_masked_intr_grp2_offset 140 + +/* Register rw_intr_grp3_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr12___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr12___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr12___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr12___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr12___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr12___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1_extra___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1_extra___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out0___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr13___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr13___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr13___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr13___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr13___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr13___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0_extra___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0_extra___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in0___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr14___lsb 16 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr14___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr14___bit 16 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr14___lsb 17 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr14___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr14___bit 17 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___lsb 19 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___bit 19 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp2___bit 20 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0___lsb 21 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0___bit 21 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0_extra___lsb 22 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0_extra___bit 22 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out1___bit 23 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr15___lsb 24 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr15___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr15___bit 24 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr15___lsb 25 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr15___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr15___bit 25 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___lsb 27 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___bit 27 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp3___bit 28 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1___lsb 29 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1___bit 29 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1_extra___lsb 30 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1_extra___bit 30 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in1___bit 31 +#define reg_iop_sw_mpu_rw_intr_grp3_mask_offset 144 + +/* Register rw_ack_intr_grp3, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr12___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr12___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr12___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr12___lsb 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr12___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr12___bit 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr13___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr13___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr13___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr13___lsb 9 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr13___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr13___bit 9 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr14___lsb 16 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr14___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr14___bit 16 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr14___lsb 17 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr14___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr14___bit 17 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr15___lsb 24 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr15___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr15___bit 24 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr15___lsb 25 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr15___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr15___bit 25 +#define reg_iop_sw_mpu_rw_ack_intr_grp3_offset 148 + +/* Register r_intr_grp3, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr12___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr12___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr12___bit 0 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr12___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr12___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr12___bit 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___bit 3 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___bit 4 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1___bit 5 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1_extra___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1_extra___bit 6 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out0___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out0___bit 7 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr13___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr13___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr13___bit 8 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr13___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr13___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr13___bit 9 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___bit 11 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___bit 12 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0___bit 13 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0_extra___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0_extra___bit 14 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in0___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in0___bit 15 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr14___lsb 16 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr14___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr14___bit 16 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr14___lsb 17 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr14___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr14___bit 17 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___lsb 19 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___bit 19 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp2___bit 20 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0___lsb 21 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0___bit 21 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0_extra___lsb 22 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0_extra___bit 22 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out1___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out1___bit 23 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr15___lsb 24 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr15___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr15___bit 24 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr15___lsb 25 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr15___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr15___bit 25 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___lsb 27 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___bit 27 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp3___bit 28 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1___lsb 29 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1___bit 29 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1_extra___lsb 30 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1_extra___bit 30 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in1___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in1___bit 31 +#define reg_iop_sw_mpu_r_intr_grp3_offset 152 + +/* Register r_masked_intr_grp3, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr12___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr12___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr12___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr12___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr12___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr12___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp0___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp0___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1_extra___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1_extra___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out0___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out0___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr13___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr13___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr13___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr13___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr13___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr13___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp1___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp1___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0_extra___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0_extra___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in0___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in0___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr14___lsb 16 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr14___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr14___bit 16 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr14___lsb 17 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr14___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr14___bit 17 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp2___lsb 18 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp2___bit 18 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___lsb 19 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___bit 19 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp2___lsb 20 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp2___bit 20 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0___lsb 21 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0___bit 21 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0_extra___lsb 22 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0_extra___bit 22 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out1___lsb 23 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out1___bit 23 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr15___lsb 24 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr15___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr15___bit 24 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr15___lsb 25 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr15___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr15___bit 25 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp3___lsb 26 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp3___bit 26 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___lsb 27 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___bit 27 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp3___lsb 28 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp3___bit 28 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1___lsb 29 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1___bit 29 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1_extra___lsb 30 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1_extra___bit 30 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in1___lsb 31 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in1___bit 31 +#define reg_iop_sw_mpu_r_masked_intr_grp3_offset 156 + + +/* Constants */ +#define regk_iop_sw_mpu_copy 0x00000000 +#define regk_iop_sw_mpu_cpu 0x00000000 +#define regk_iop_sw_mpu_mpu 0x00000001 +#define regk_iop_sw_mpu_no 0x00000000 +#define regk_iop_sw_mpu_nop 0x00000000 +#define regk_iop_sw_mpu_rd 0x00000002 +#define regk_iop_sw_mpu_reg_copy 0x00000001 +#define regk_iop_sw_mpu_rw_bus0_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus0_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus0_oe_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus0_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus1_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus1_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus1_oe_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus1_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_oe_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp0_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp1_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp2_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp3_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_sw_cfg_owner_default 0x00000000 +#define regk_iop_sw_mpu_set 0x00000001 +#define regk_iop_sw_mpu_spu0 0x00000002 +#define regk_iop_sw_mpu_spu1 0x00000003 +#define regk_iop_sw_mpu_wr 0x00000003 +#define regk_iop_sw_mpu_yes 0x00000001 +#endif /* __iop_sw_mpu_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_spu_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_spu_defs_asm.h new file mode 100644 index 000000000000..0929f144cfa1 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_sw_spu_defs_asm.h @@ -0,0 +1,691 @@ +#ifndef __iop_sw_spu_defs_asm_h +#define __iop_sw_spu_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_sw_spu.r + * id: + * last modfied: Mon Apr 11 16:10:19 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_spu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_spu.r + * id: $Id: iop_sw_spu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_mc_ctrl, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___lsb 0 +#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___width 1 +#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___bit 0 +#define reg_iop_sw_spu_rw_mc_ctrl___cmd___lsb 1 +#define reg_iop_sw_spu_rw_mc_ctrl___cmd___width 2 +#define reg_iop_sw_spu_rw_mc_ctrl___size___lsb 3 +#define reg_iop_sw_spu_rw_mc_ctrl___size___width 3 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu0_mem___lsb 6 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu0_mem___width 1 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu0_mem___bit 6 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu1_mem___lsb 7 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu1_mem___width 1 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu1_mem___bit 7 +#define reg_iop_sw_spu_rw_mc_ctrl_offset 0 + +/* Register rw_mc_data, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mc_data___val___lsb 0 +#define reg_iop_sw_spu_rw_mc_data___val___width 32 +#define reg_iop_sw_spu_rw_mc_data_offset 4 + +/* Register rw_mc_addr, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mc_addr_offset 8 + +/* Register rs_mc_data, scope iop_sw_spu, type rs */ +#define reg_iop_sw_spu_rs_mc_data_offset 12 + +/* Register r_mc_data, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mc_data_offset 16 + +/* Register r_mc_stat, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mc_stat___busy_cpu___lsb 0 +#define reg_iop_sw_spu_r_mc_stat___busy_cpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___busy_cpu___bit 0 +#define reg_iop_sw_spu_r_mc_stat___busy_mpu___lsb 1 +#define reg_iop_sw_spu_r_mc_stat___busy_mpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___busy_mpu___bit 1 +#define reg_iop_sw_spu_r_mc_stat___busy_spu0___lsb 2 +#define reg_iop_sw_spu_r_mc_stat___busy_spu0___width 1 +#define reg_iop_sw_spu_r_mc_stat___busy_spu0___bit 2 +#define reg_iop_sw_spu_r_mc_stat___busy_spu1___lsb 3 +#define reg_iop_sw_spu_r_mc_stat___busy_spu1___width 1 +#define reg_iop_sw_spu_r_mc_stat___busy_spu1___bit 3 +#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___lsb 4 +#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___bit 4 +#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___lsb 5 +#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___bit 5 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu0___lsb 6 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu0___width 1 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu0___bit 6 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu1___lsb 7 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu1___width 1 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu1___bit 7 +#define reg_iop_sw_spu_r_mc_stat_offset 20 + +/* Register rw_bus0_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus0_clr_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus0_clr_mask___byte0___width 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask___byte1___width 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask___byte2___lsb 16 +#define reg_iop_sw_spu_rw_bus0_clr_mask___byte2___width 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask___byte3___lsb 24 +#define reg_iop_sw_spu_rw_bus0_clr_mask___byte3___width 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask_offset 24 + +/* Register rw_bus0_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus0_set_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus0_set_mask___byte0___width 8 +#define reg_iop_sw_spu_rw_bus0_set_mask___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus0_set_mask___byte1___width 8 +#define reg_iop_sw_spu_rw_bus0_set_mask___byte2___lsb 16 +#define reg_iop_sw_spu_rw_bus0_set_mask___byte2___width 8 +#define reg_iop_sw_spu_rw_bus0_set_mask___byte3___lsb 24 +#define reg_iop_sw_spu_rw_bus0_set_mask___byte3___width 8 +#define reg_iop_sw_spu_rw_bus0_set_mask_offset 28 + +/* Register rw_bus0_oe_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_spu_rw_bus0_oe_clr_mask_offset 32 + +/* Register rw_bus0_oe_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte0___width 1 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte1___width 1 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte2___width 1 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte3___width 1 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_spu_rw_bus0_oe_set_mask_offset 36 + +/* Register r_bus0_in, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_bus0_in_offset 40 + +/* Register rw_bus1_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus1_clr_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus1_clr_mask___byte0___width 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask___byte1___width 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask___byte2___lsb 16 +#define reg_iop_sw_spu_rw_bus1_clr_mask___byte2___width 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask___byte3___lsb 24 +#define reg_iop_sw_spu_rw_bus1_clr_mask___byte3___width 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask_offset 44 + +/* Register rw_bus1_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus1_set_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus1_set_mask___byte0___width 8 +#define reg_iop_sw_spu_rw_bus1_set_mask___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus1_set_mask___byte1___width 8 +#define reg_iop_sw_spu_rw_bus1_set_mask___byte2___lsb 16 +#define reg_iop_sw_spu_rw_bus1_set_mask___byte2___width 8 +#define reg_iop_sw_spu_rw_bus1_set_mask___byte3___lsb 24 +#define reg_iop_sw_spu_rw_bus1_set_mask___byte3___width 8 +#define reg_iop_sw_spu_rw_bus1_set_mask_offset 48 + +/* Register rw_bus1_oe_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_spu_rw_bus1_oe_clr_mask_offset 52 + +/* Register rw_bus1_oe_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte0___width 1 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte1___width 1 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte2___width 1 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte3___width 1 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_spu_rw_bus1_oe_set_mask_offset 56 + +/* Register r_bus1_in, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_bus1_in_offset 60 + +/* Register rw_gio_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_clr_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_clr_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_clr_mask_offset 64 + +/* Register rw_gio_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_set_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_set_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_set_mask_offset 68 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_clr_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_offset 72 + +/* Register rw_gio_oe_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_set_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_set_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_offset 76 + +/* Register r_gio_in, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_gio_in_offset 80 + +/* Register rw_bus0_clr_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus0_clr_mask_lo___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus0_clr_mask_lo___byte0___width 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask_lo___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask_lo___byte1___width 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask_lo_offset 84 + +/* Register rw_bus0_clr_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus0_clr_mask_hi___byte2___lsb 0 +#define reg_iop_sw_spu_rw_bus0_clr_mask_hi___byte2___width 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask_hi___byte3___lsb 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask_hi___byte3___width 8 +#define reg_iop_sw_spu_rw_bus0_clr_mask_hi_offset 88 + +/* Register rw_bus0_set_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus0_set_mask_lo___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus0_set_mask_lo___byte0___width 8 +#define reg_iop_sw_spu_rw_bus0_set_mask_lo___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus0_set_mask_lo___byte1___width 8 +#define reg_iop_sw_spu_rw_bus0_set_mask_lo_offset 92 + +/* Register rw_bus0_set_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus0_set_mask_hi___byte2___lsb 0 +#define reg_iop_sw_spu_rw_bus0_set_mask_hi___byte2___width 8 +#define reg_iop_sw_spu_rw_bus0_set_mask_hi___byte3___lsb 8 +#define reg_iop_sw_spu_rw_bus0_set_mask_hi___byte3___width 8 +#define reg_iop_sw_spu_rw_bus0_set_mask_hi_offset 96 + +/* Register rw_bus1_clr_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus1_clr_mask_lo___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus1_clr_mask_lo___byte0___width 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask_lo___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask_lo___byte1___width 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask_lo_offset 100 + +/* Register rw_bus1_clr_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus1_clr_mask_hi___byte2___lsb 0 +#define reg_iop_sw_spu_rw_bus1_clr_mask_hi___byte2___width 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask_hi___byte3___lsb 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask_hi___byte3___width 8 +#define reg_iop_sw_spu_rw_bus1_clr_mask_hi_offset 104 + +/* Register rw_bus1_set_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus1_set_mask_lo___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus1_set_mask_lo___byte0___width 8 +#define reg_iop_sw_spu_rw_bus1_set_mask_lo___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus1_set_mask_lo___byte1___width 8 +#define reg_iop_sw_spu_rw_bus1_set_mask_lo_offset 108 + +/* Register rw_bus1_set_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus1_set_mask_hi___byte2___lsb 0 +#define reg_iop_sw_spu_rw_bus1_set_mask_hi___byte2___width 8 +#define reg_iop_sw_spu_rw_bus1_set_mask_hi___byte3___lsb 8 +#define reg_iop_sw_spu_rw_bus1_set_mask_hi___byte3___width 8 +#define reg_iop_sw_spu_rw_bus1_set_mask_hi_offset 112 + +/* Register rw_gio_clr_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_clr_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_clr_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_clr_mask_lo_offset 116 + +/* Register rw_gio_clr_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_clr_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_clr_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_clr_mask_hi_offset 120 + +/* Register rw_gio_set_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_set_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_set_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_set_mask_lo_offset 124 + +/* Register rw_gio_set_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_set_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_set_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_set_mask_hi_offset 128 + +/* Register rw_gio_oe_clr_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo_offset 132 + +/* Register rw_gio_oe_clr_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi_offset 136 + +/* Register rw_gio_oe_set_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo_offset 140 + +/* Register rw_gio_oe_set_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi_offset 144 + +/* Register rw_cpu_intr, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_rw_cpu_intr___intr0___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_rw_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr1___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_rw_cpu_intr___intr2___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_rw_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_rw_cpu_intr___intr3___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_rw_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_rw_cpu_intr___intr4___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_rw_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_rw_cpu_intr___intr5___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_rw_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_rw_cpu_intr___intr6___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_rw_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_rw_cpu_intr___intr7___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_rw_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_rw_cpu_intr___intr8___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_rw_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_rw_cpu_intr___intr9___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_rw_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_rw_cpu_intr___intr10___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_rw_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_rw_cpu_intr___intr11___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_rw_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_rw_cpu_intr___intr12___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_rw_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_rw_cpu_intr___intr13___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_rw_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_rw_cpu_intr___intr14___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_rw_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_rw_cpu_intr___intr15___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_rw_cpu_intr_offset 148 + +/* Register r_cpu_intr, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_r_cpu_intr___intr0___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_r_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_r_cpu_intr___intr1___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_r_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_r_cpu_intr___intr2___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_r_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_r_cpu_intr___intr3___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_r_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_r_cpu_intr___intr4___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_r_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_r_cpu_intr___intr5___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_r_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_r_cpu_intr___intr6___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_r_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_r_cpu_intr___intr7___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_r_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_r_cpu_intr___intr8___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_r_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_r_cpu_intr___intr9___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_r_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_r_cpu_intr___intr10___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_r_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_r_cpu_intr___intr11___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_r_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_r_cpu_intr___intr12___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_r_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_r_cpu_intr___intr13___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_r_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_r_cpu_intr___intr14___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_r_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_r_cpu_intr___intr15___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_r_cpu_intr_offset 152 + +/* Register r_hw_intr, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___lsb 0 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___bit 0 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___lsb 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___bit 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___lsb 2 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___bit 2 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___lsb 3 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___bit 3 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___lsb 4 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___bit 4 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___lsb 5 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___bit 5 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___lsb 6 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___bit 6 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___lsb 7 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___bit 7 +#define reg_iop_sw_spu_r_hw_intr___timer_grp0___lsb 8 +#define reg_iop_sw_spu_r_hw_intr___timer_grp0___width 1 +#define reg_iop_sw_spu_r_hw_intr___timer_grp0___bit 8 +#define reg_iop_sw_spu_r_hw_intr___timer_grp1___lsb 9 +#define reg_iop_sw_spu_r_hw_intr___timer_grp1___width 1 +#define reg_iop_sw_spu_r_hw_intr___timer_grp1___bit 9 +#define reg_iop_sw_spu_r_hw_intr___timer_grp2___lsb 10 +#define reg_iop_sw_spu_r_hw_intr___timer_grp2___width 1 +#define reg_iop_sw_spu_r_hw_intr___timer_grp2___bit 10 +#define reg_iop_sw_spu_r_hw_intr___timer_grp3___lsb 11 +#define reg_iop_sw_spu_r_hw_intr___timer_grp3___width 1 +#define reg_iop_sw_spu_r_hw_intr___timer_grp3___bit 11 +#define reg_iop_sw_spu_r_hw_intr___fifo_out0___lsb 12 +#define reg_iop_sw_spu_r_hw_intr___fifo_out0___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_out0___bit 12 +#define reg_iop_sw_spu_r_hw_intr___fifo_out0_extra___lsb 13 +#define reg_iop_sw_spu_r_hw_intr___fifo_out0_extra___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_out0_extra___bit 13 +#define reg_iop_sw_spu_r_hw_intr___fifo_in0___lsb 14 +#define reg_iop_sw_spu_r_hw_intr___fifo_in0___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_in0___bit 14 +#define reg_iop_sw_spu_r_hw_intr___fifo_in0_extra___lsb 15 +#define reg_iop_sw_spu_r_hw_intr___fifo_in0_extra___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_in0_extra___bit 15 +#define reg_iop_sw_spu_r_hw_intr___fifo_out1___lsb 16 +#define reg_iop_sw_spu_r_hw_intr___fifo_out1___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_out1___bit 16 +#define reg_iop_sw_spu_r_hw_intr___fifo_out1_extra___lsb 17 +#define reg_iop_sw_spu_r_hw_intr___fifo_out1_extra___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_out1_extra___bit 17 +#define reg_iop_sw_spu_r_hw_intr___fifo_in1___lsb 18 +#define reg_iop_sw_spu_r_hw_intr___fifo_in1___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_in1___bit 18 +#define reg_iop_sw_spu_r_hw_intr___fifo_in1_extra___lsb 19 +#define reg_iop_sw_spu_r_hw_intr___fifo_in1_extra___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_in1_extra___bit 19 +#define reg_iop_sw_spu_r_hw_intr___dmc_out0___lsb 20 +#define reg_iop_sw_spu_r_hw_intr___dmc_out0___width 1 +#define reg_iop_sw_spu_r_hw_intr___dmc_out0___bit 20 +#define reg_iop_sw_spu_r_hw_intr___dmc_in0___lsb 21 +#define reg_iop_sw_spu_r_hw_intr___dmc_in0___width 1 +#define reg_iop_sw_spu_r_hw_intr___dmc_in0___bit 21 +#define reg_iop_sw_spu_r_hw_intr___dmc_out1___lsb 22 +#define reg_iop_sw_spu_r_hw_intr___dmc_out1___width 1 +#define reg_iop_sw_spu_r_hw_intr___dmc_out1___bit 22 +#define reg_iop_sw_spu_r_hw_intr___dmc_in1___lsb 23 +#define reg_iop_sw_spu_r_hw_intr___dmc_in1___width 1 +#define reg_iop_sw_spu_r_hw_intr___dmc_in1___bit 23 +#define reg_iop_sw_spu_r_hw_intr_offset 156 + +/* Register rw_mpu_intr, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_rw_mpu_intr___intr0___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_rw_mpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr1___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_rw_mpu_intr___intr2___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_rw_mpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_rw_mpu_intr___intr3___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_rw_mpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_rw_mpu_intr___intr4___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_rw_mpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_rw_mpu_intr___intr5___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_rw_mpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_rw_mpu_intr___intr6___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_rw_mpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_rw_mpu_intr___intr7___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_rw_mpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_rw_mpu_intr___intr8___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_rw_mpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_rw_mpu_intr___intr9___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_rw_mpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_rw_mpu_intr___intr10___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_rw_mpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_rw_mpu_intr___intr11___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_rw_mpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_rw_mpu_intr___intr12___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_rw_mpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_rw_mpu_intr___intr13___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_rw_mpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_rw_mpu_intr___intr14___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_rw_mpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_rw_mpu_intr___intr15___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_rw_mpu_intr_offset 160 + +/* Register r_mpu_intr, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_r_mpu_intr___intr0___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_r_mpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_r_mpu_intr___intr1___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_r_mpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_r_mpu_intr___intr2___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_r_mpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_r_mpu_intr___intr3___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_r_mpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_r_mpu_intr___intr4___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_r_mpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_r_mpu_intr___intr5___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_r_mpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_r_mpu_intr___intr6___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_r_mpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_r_mpu_intr___intr7___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_r_mpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_r_mpu_intr___intr8___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_r_mpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_r_mpu_intr___intr9___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_r_mpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_r_mpu_intr___intr10___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_r_mpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_r_mpu_intr___intr11___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_r_mpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_r_mpu_intr___intr12___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_r_mpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_r_mpu_intr___intr13___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_r_mpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_r_mpu_intr___intr14___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_r_mpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_r_mpu_intr___intr15___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr0___lsb 16 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr0___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr0___bit 16 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr1___lsb 17 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr1___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr1___bit 17 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr2___lsb 18 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr2___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr2___bit 18 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr3___lsb 19 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr3___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr3___bit 19 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr4___lsb 20 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr4___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr4___bit 20 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr5___lsb 21 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr5___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr5___bit 21 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr6___lsb 22 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr6___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr6___bit 22 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr7___lsb 23 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr7___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr7___bit 23 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr8___lsb 24 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr8___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr8___bit 24 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr9___lsb 25 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr9___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr9___bit 25 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr10___lsb 26 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr10___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr10___bit 26 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr11___lsb 27 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr11___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr11___bit 27 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr12___lsb 28 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr12___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr12___bit 28 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr13___lsb 29 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr13___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr13___bit 29 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr14___lsb 30 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr14___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr14___bit 30 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr15___lsb 31 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr15___width 1 +#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr15___bit 31 +#define reg_iop_sw_spu_r_mpu_intr_offset 164 + + +/* Constants */ +#define regk_iop_sw_spu_copy 0x00000000 +#define regk_iop_sw_spu_no 0x00000000 +#define regk_iop_sw_spu_nop 0x00000000 +#define regk_iop_sw_spu_rd 0x00000002 +#define regk_iop_sw_spu_reg_copy 0x00000001 +#define regk_iop_sw_spu_rw_bus0_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus0_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus0_oe_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus0_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus1_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus1_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus1_oe_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus1_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_oe_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_set_mask_default 0x00000000 +#define regk_iop_sw_spu_set 0x00000001 +#define regk_iop_sw_spu_wr 0x00000003 +#define regk_iop_sw_spu_yes 0x00000001 +#endif /* __iop_sw_spu_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_timer_grp_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_timer_grp_defs_asm.h new file mode 100644 index 000000000000..7129a9a4bedc --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_timer_grp_defs_asm.h @@ -0,0 +1,237 @@ +#ifndef __iop_timer_grp_defs_asm_h +#define __iop_timer_grp_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_timer_grp.r + * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_timer_grp_defs_asm.h ../../inst/io_proc/rtl/iop_timer_grp.r + * id: $Id: iop_timer_grp_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope iop_timer_grp, type rw */ +#define reg_iop_timer_grp_rw_cfg___clk_src___lsb 0 +#define reg_iop_timer_grp_rw_cfg___clk_src___width 1 +#define reg_iop_timer_grp_rw_cfg___clk_src___bit 0 +#define reg_iop_timer_grp_rw_cfg___trig___lsb 1 +#define reg_iop_timer_grp_rw_cfg___trig___width 2 +#define reg_iop_timer_grp_rw_cfg___clk_gen_div___lsb 3 +#define reg_iop_timer_grp_rw_cfg___clk_gen_div___width 8 +#define reg_iop_timer_grp_rw_cfg___clk_div___lsb 11 +#define reg_iop_timer_grp_rw_cfg___clk_div___width 8 +#define reg_iop_timer_grp_rw_cfg_offset 0 + +/* Register rw_half_period, scope iop_timer_grp, type rw */ +#define reg_iop_timer_grp_rw_half_period___quota_lo___lsb 0 +#define reg_iop_timer_grp_rw_half_period___quota_lo___width 15 +#define reg_iop_timer_grp_rw_half_period___quota_hi___lsb 15 +#define reg_iop_timer_grp_rw_half_period___quota_hi___width 15 +#define reg_iop_timer_grp_rw_half_period___quota_hi_sel___lsb 30 +#define reg_iop_timer_grp_rw_half_period___quota_hi_sel___width 1 +#define reg_iop_timer_grp_rw_half_period___quota_hi_sel___bit 30 +#define reg_iop_timer_grp_rw_half_period_offset 4 + +/* Register rw_half_period_len, scope iop_timer_grp, type rw */ +#define reg_iop_timer_grp_rw_half_period_len_offset 8 + +#define STRIDE_iop_timer_grp_rw_tmr_cfg 4 +/* Register rw_tmr_cfg, scope iop_timer_grp, type rw */ +#define reg_iop_timer_grp_rw_tmr_cfg___clk_src___lsb 0 +#define reg_iop_timer_grp_rw_tmr_cfg___clk_src___width 3 +#define reg_iop_timer_grp_rw_tmr_cfg___strb___lsb 3 +#define reg_iop_timer_grp_rw_tmr_cfg___strb___width 2 +#define reg_iop_timer_grp_rw_tmr_cfg___run_mode___lsb 5 +#define reg_iop_timer_grp_rw_tmr_cfg___run_mode___width 2 +#define reg_iop_timer_grp_rw_tmr_cfg___out_mode___lsb 7 +#define reg_iop_timer_grp_rw_tmr_cfg___out_mode___width 1 +#define reg_iop_timer_grp_rw_tmr_cfg___out_mode___bit 7 +#define reg_iop_timer_grp_rw_tmr_cfg___active_on_tmr___lsb 8 +#define reg_iop_timer_grp_rw_tmr_cfg___active_on_tmr___width 2 +#define reg_iop_timer_grp_rw_tmr_cfg___inv___lsb 10 +#define reg_iop_timer_grp_rw_tmr_cfg___inv___width 1 +#define reg_iop_timer_grp_rw_tmr_cfg___inv___bit 10 +#define reg_iop_timer_grp_rw_tmr_cfg___en_by_tmr___lsb 11 +#define reg_iop_timer_grp_rw_tmr_cfg___en_by_tmr___width 2 +#define reg_iop_timer_grp_rw_tmr_cfg___dis_by_tmr___lsb 13 +#define reg_iop_timer_grp_rw_tmr_cfg___dis_by_tmr___width 2 +#define reg_iop_timer_grp_rw_tmr_cfg___en_only_by_reg___lsb 15 +#define reg_iop_timer_grp_rw_tmr_cfg___en_only_by_reg___width 1 +#define reg_iop_timer_grp_rw_tmr_cfg___en_only_by_reg___bit 15 +#define reg_iop_timer_grp_rw_tmr_cfg___dis_only_by_reg___lsb 16 +#define reg_iop_timer_grp_rw_tmr_cfg___dis_only_by_reg___width 1 +#define reg_iop_timer_grp_rw_tmr_cfg___dis_only_by_reg___bit 16 +#define reg_iop_timer_grp_rw_tmr_cfg___rst_at_en_strb___lsb 17 +#define reg_iop_timer_grp_rw_tmr_cfg___rst_at_en_strb___width 1 +#define reg_iop_timer_grp_rw_tmr_cfg___rst_at_en_strb___bit 17 +#define reg_iop_timer_grp_rw_tmr_cfg_offset 12 + +#define STRIDE_iop_timer_grp_rw_tmr_len 4 +/* Register rw_tmr_len, scope iop_timer_grp, type rw */ +#define reg_iop_timer_grp_rw_tmr_len___val___lsb 0 +#define reg_iop_timer_grp_rw_tmr_len___val___width 16 +#define reg_iop_timer_grp_rw_tmr_len_offset 44 + +/* Register rw_cmd, scope iop_timer_grp, type rw */ +#define reg_iop_timer_grp_rw_cmd___rst___lsb 0 +#define reg_iop_timer_grp_rw_cmd___rst___width 4 +#define reg_iop_timer_grp_rw_cmd___en___lsb 4 +#define reg_iop_timer_grp_rw_cmd___en___width 4 +#define reg_iop_timer_grp_rw_cmd___dis___lsb 8 +#define reg_iop_timer_grp_rw_cmd___dis___width 4 +#define reg_iop_timer_grp_rw_cmd___strb___lsb 12 +#define reg_iop_timer_grp_rw_cmd___strb___width 4 +#define reg_iop_timer_grp_rw_cmd_offset 60 + +/* Register r_clk_gen_cnt, scope iop_timer_grp, type r */ +#define reg_iop_timer_grp_r_clk_gen_cnt_offset 64 + +#define STRIDE_iop_timer_grp_rs_tmr_cnt 8 +/* Register rs_tmr_cnt, scope iop_timer_grp, type rs */ +#define reg_iop_timer_grp_rs_tmr_cnt___val___lsb 0 +#define reg_iop_timer_grp_rs_tmr_cnt___val___width 16 +#define reg_iop_timer_grp_rs_tmr_cnt_offset 68 + +#define STRIDE_iop_timer_grp_r_tmr_cnt 8 +/* Register r_tmr_cnt, scope iop_timer_grp, type r */ +#define reg_iop_timer_grp_r_tmr_cnt___val___lsb 0 +#define reg_iop_timer_grp_r_tmr_cnt___val___width 16 +#define reg_iop_timer_grp_r_tmr_cnt_offset 72 + +/* Register rw_intr_mask, scope iop_timer_grp, type rw */ +#define reg_iop_timer_grp_rw_intr_mask___tmr0___lsb 0 +#define reg_iop_timer_grp_rw_intr_mask___tmr0___width 1 +#define reg_iop_timer_grp_rw_intr_mask___tmr0___bit 0 +#define reg_iop_timer_grp_rw_intr_mask___tmr1___lsb 1 +#define reg_iop_timer_grp_rw_intr_mask___tmr1___width 1 +#define reg_iop_timer_grp_rw_intr_mask___tmr1___bit 1 +#define reg_iop_timer_grp_rw_intr_mask___tmr2___lsb 2 +#define reg_iop_timer_grp_rw_intr_mask___tmr2___width 1 +#define reg_iop_timer_grp_rw_intr_mask___tmr2___bit 2 +#define reg_iop_timer_grp_rw_intr_mask___tmr3___lsb 3 +#define reg_iop_timer_grp_rw_intr_mask___tmr3___width 1 +#define reg_iop_timer_grp_rw_intr_mask___tmr3___bit 3 +#define reg_iop_timer_grp_rw_intr_mask_offset 100 + +/* Register rw_ack_intr, scope iop_timer_grp, type rw */ +#define reg_iop_timer_grp_rw_ack_intr___tmr0___lsb 0 +#define reg_iop_timer_grp_rw_ack_intr___tmr0___width 1 +#define reg_iop_timer_grp_rw_ack_intr___tmr0___bit 0 +#define reg_iop_timer_grp_rw_ack_intr___tmr1___lsb 1 +#define reg_iop_timer_grp_rw_ack_intr___tmr1___width 1 +#define reg_iop_timer_grp_rw_ack_intr___tmr1___bit 1 +#define reg_iop_timer_grp_rw_ack_intr___tmr2___lsb 2 +#define reg_iop_timer_grp_rw_ack_intr___tmr2___width 1 +#define reg_iop_timer_grp_rw_ack_intr___tmr2___bit 2 +#define reg_iop_timer_grp_rw_ack_intr___tmr3___lsb 3 +#define reg_iop_timer_grp_rw_ack_intr___tmr3___width 1 +#define reg_iop_timer_grp_rw_ack_intr___tmr3___bit 3 +#define reg_iop_timer_grp_rw_ack_intr_offset 104 + +/* Register r_intr, scope iop_timer_grp, type r */ +#define reg_iop_timer_grp_r_intr___tmr0___lsb 0 +#define reg_iop_timer_grp_r_intr___tmr0___width 1 +#define reg_iop_timer_grp_r_intr___tmr0___bit 0 +#define reg_iop_timer_grp_r_intr___tmr1___lsb 1 +#define reg_iop_timer_grp_r_intr___tmr1___width 1 +#define reg_iop_timer_grp_r_intr___tmr1___bit 1 +#define reg_iop_timer_grp_r_intr___tmr2___lsb 2 +#define reg_iop_timer_grp_r_intr___tmr2___width 1 +#define reg_iop_timer_grp_r_intr___tmr2___bit 2 +#define reg_iop_timer_grp_r_intr___tmr3___lsb 3 +#define reg_iop_timer_grp_r_intr___tmr3___width 1 +#define reg_iop_timer_grp_r_intr___tmr3___bit 3 +#define reg_iop_timer_grp_r_intr_offset 108 + +/* Register r_masked_intr, scope iop_timer_grp, type r */ +#define reg_iop_timer_grp_r_masked_intr___tmr0___lsb 0 +#define reg_iop_timer_grp_r_masked_intr___tmr0___width 1 +#define reg_iop_timer_grp_r_masked_intr___tmr0___bit 0 +#define reg_iop_timer_grp_r_masked_intr___tmr1___lsb 1 +#define reg_iop_timer_grp_r_masked_intr___tmr1___width 1 +#define reg_iop_timer_grp_r_masked_intr___tmr1___bit 1 +#define reg_iop_timer_grp_r_masked_intr___tmr2___lsb 2 +#define reg_iop_timer_grp_r_masked_intr___tmr2___width 1 +#define reg_iop_timer_grp_r_masked_intr___tmr2___bit 2 +#define reg_iop_timer_grp_r_masked_intr___tmr3___lsb 3 +#define reg_iop_timer_grp_r_masked_intr___tmr3___width 1 +#define reg_iop_timer_grp_r_masked_intr___tmr3___bit 3 +#define reg_iop_timer_grp_r_masked_intr_offset 112 + + +/* Constants */ +#define regk_iop_timer_grp_clk200 0x00000000 +#define regk_iop_timer_grp_clk_gen 0x00000002 +#define regk_iop_timer_grp_complete 0x00000002 +#define regk_iop_timer_grp_div_clk200 0x00000001 +#define regk_iop_timer_grp_div_clk_gen 0x00000003 +#define regk_iop_timer_grp_ext 0x00000001 +#define regk_iop_timer_grp_hi 0x00000000 +#define regk_iop_timer_grp_long_period 0x00000001 +#define regk_iop_timer_grp_neg 0x00000002 +#define regk_iop_timer_grp_no 0x00000000 +#define regk_iop_timer_grp_once 0x00000003 +#define regk_iop_timer_grp_pause 0x00000001 +#define regk_iop_timer_grp_pos 0x00000001 +#define regk_iop_timer_grp_pos_neg 0x00000003 +#define regk_iop_timer_grp_pulse 0x00000000 +#define regk_iop_timer_grp_r_tmr_cnt_size 0x00000004 +#define regk_iop_timer_grp_rs_tmr_cnt_size 0x00000004 +#define regk_iop_timer_grp_rw_cfg_default 0x00000002 +#define regk_iop_timer_grp_rw_intr_mask_default 0x00000000 +#define regk_iop_timer_grp_rw_tmr_cfg_default0 0x00018000 +#define regk_iop_timer_grp_rw_tmr_cfg_default1 0x0001a900 +#define regk_iop_timer_grp_rw_tmr_cfg_default2 0x0001d200 +#define regk_iop_timer_grp_rw_tmr_cfg_default3 0x0001fb00 +#define regk_iop_timer_grp_rw_tmr_cfg_size 0x00000004 +#define regk_iop_timer_grp_rw_tmr_len_default 0x00000000 +#define regk_iop_timer_grp_rw_tmr_len_size 0x00000004 +#define regk_iop_timer_grp_short_period 0x00000000 +#define regk_iop_timer_grp_stop 0x00000000 +#define regk_iop_timer_grp_tmr 0x00000004 +#define regk_iop_timer_grp_toggle 0x00000001 +#define regk_iop_timer_grp_yes 0x00000001 +#endif /* __iop_timer_grp_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_trigger_grp_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_trigger_grp_defs_asm.h new file mode 100644 index 000000000000..1005d9db80dc --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_trigger_grp_defs_asm.h @@ -0,0 +1,157 @@ +#ifndef __iop_trigger_grp_defs_asm_h +#define __iop_trigger_grp_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_trigger_grp.r + * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_trigger_grp_defs_asm.h ../../inst/io_proc/rtl/iop_trigger_grp.r + * id: $Id: iop_trigger_grp_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +#define STRIDE_iop_trigger_grp_rw_cfg 4 +/* Register rw_cfg, scope iop_trigger_grp, type rw */ +#define reg_iop_trigger_grp_rw_cfg___action___lsb 0 +#define reg_iop_trigger_grp_rw_cfg___action___width 2 +#define reg_iop_trigger_grp_rw_cfg___once___lsb 2 +#define reg_iop_trigger_grp_rw_cfg___once___width 1 +#define reg_iop_trigger_grp_rw_cfg___once___bit 2 +#define reg_iop_trigger_grp_rw_cfg___trig___lsb 3 +#define reg_iop_trigger_grp_rw_cfg___trig___width 3 +#define reg_iop_trigger_grp_rw_cfg___en_only_by_reg___lsb 6 +#define reg_iop_trigger_grp_rw_cfg___en_only_by_reg___width 1 +#define reg_iop_trigger_grp_rw_cfg___en_only_by_reg___bit 6 +#define reg_iop_trigger_grp_rw_cfg___dis_only_by_reg___lsb 7 +#define reg_iop_trigger_grp_rw_cfg___dis_only_by_reg___width 1 +#define reg_iop_trigger_grp_rw_cfg___dis_only_by_reg___bit 7 +#define reg_iop_trigger_grp_rw_cfg_offset 0 + +/* Register rw_cmd, scope iop_trigger_grp, type rw */ +#define reg_iop_trigger_grp_rw_cmd___dis___lsb 0 +#define reg_iop_trigger_grp_rw_cmd___dis___width 4 +#define reg_iop_trigger_grp_rw_cmd___en___lsb 4 +#define reg_iop_trigger_grp_rw_cmd___en___width 4 +#define reg_iop_trigger_grp_rw_cmd_offset 16 + +/* Register rw_intr_mask, scope iop_trigger_grp, type rw */ +#define reg_iop_trigger_grp_rw_intr_mask___trig0___lsb 0 +#define reg_iop_trigger_grp_rw_intr_mask___trig0___width 1 +#define reg_iop_trigger_grp_rw_intr_mask___trig0___bit 0 +#define reg_iop_trigger_grp_rw_intr_mask___trig1___lsb 1 +#define reg_iop_trigger_grp_rw_intr_mask___trig1___width 1 +#define reg_iop_trigger_grp_rw_intr_mask___trig1___bit 1 +#define reg_iop_trigger_grp_rw_intr_mask___trig2___lsb 2 +#define reg_iop_trigger_grp_rw_intr_mask___trig2___width 1 +#define reg_iop_trigger_grp_rw_intr_mask___trig2___bit 2 +#define reg_iop_trigger_grp_rw_intr_mask___trig3___lsb 3 +#define reg_iop_trigger_grp_rw_intr_mask___trig3___width 1 +#define reg_iop_trigger_grp_rw_intr_mask___trig3___bit 3 +#define reg_iop_trigger_grp_rw_intr_mask_offset 20 + +/* Register rw_ack_intr, scope iop_trigger_grp, type rw */ +#define reg_iop_trigger_grp_rw_ack_intr___trig0___lsb 0 +#define reg_iop_trigger_grp_rw_ack_intr___trig0___width 1 +#define reg_iop_trigger_grp_rw_ack_intr___trig0___bit 0 +#define reg_iop_trigger_grp_rw_ack_intr___trig1___lsb 1 +#define reg_iop_trigger_grp_rw_ack_intr___trig1___width 1 +#define reg_iop_trigger_grp_rw_ack_intr___trig1___bit 1 +#define reg_iop_trigger_grp_rw_ack_intr___trig2___lsb 2 +#define reg_iop_trigger_grp_rw_ack_intr___trig2___width 1 +#define reg_iop_trigger_grp_rw_ack_intr___trig2___bit 2 +#define reg_iop_trigger_grp_rw_ack_intr___trig3___lsb 3 +#define reg_iop_trigger_grp_rw_ack_intr___trig3___width 1 +#define reg_iop_trigger_grp_rw_ack_intr___trig3___bit 3 +#define reg_iop_trigger_grp_rw_ack_intr_offset 24 + +/* Register r_intr, scope iop_trigger_grp, type r */ +#define reg_iop_trigger_grp_r_intr___trig0___lsb 0 +#define reg_iop_trigger_grp_r_intr___trig0___width 1 +#define reg_iop_trigger_grp_r_intr___trig0___bit 0 +#define reg_iop_trigger_grp_r_intr___trig1___lsb 1 +#define reg_iop_trigger_grp_r_intr___trig1___width 1 +#define reg_iop_trigger_grp_r_intr___trig1___bit 1 +#define reg_iop_trigger_grp_r_intr___trig2___lsb 2 +#define reg_iop_trigger_grp_r_intr___trig2___width 1 +#define reg_iop_trigger_grp_r_intr___trig2___bit 2 +#define reg_iop_trigger_grp_r_intr___trig3___lsb 3 +#define reg_iop_trigger_grp_r_intr___trig3___width 1 +#define reg_iop_trigger_grp_r_intr___trig3___bit 3 +#define reg_iop_trigger_grp_r_intr_offset 28 + +/* Register r_masked_intr, scope iop_trigger_grp, type r */ +#define reg_iop_trigger_grp_r_masked_intr___trig0___lsb 0 +#define reg_iop_trigger_grp_r_masked_intr___trig0___width 1 +#define reg_iop_trigger_grp_r_masked_intr___trig0___bit 0 +#define reg_iop_trigger_grp_r_masked_intr___trig1___lsb 1 +#define reg_iop_trigger_grp_r_masked_intr___trig1___width 1 +#define reg_iop_trigger_grp_r_masked_intr___trig1___bit 1 +#define reg_iop_trigger_grp_r_masked_intr___trig2___lsb 2 +#define reg_iop_trigger_grp_r_masked_intr___trig2___width 1 +#define reg_iop_trigger_grp_r_masked_intr___trig2___bit 2 +#define reg_iop_trigger_grp_r_masked_intr___trig3___lsb 3 +#define reg_iop_trigger_grp_r_masked_intr___trig3___width 1 +#define reg_iop_trigger_grp_r_masked_intr___trig3___bit 3 +#define reg_iop_trigger_grp_r_masked_intr_offset 32 + + +/* Constants */ +#define regk_iop_trigger_grp_fall 0x00000002 +#define regk_iop_trigger_grp_fall_lo 0x00000006 +#define regk_iop_trigger_grp_no 0x00000000 +#define regk_iop_trigger_grp_off 0x00000000 +#define regk_iop_trigger_grp_pulse 0x00000000 +#define regk_iop_trigger_grp_rise 0x00000001 +#define regk_iop_trigger_grp_rise_fall 0x00000003 +#define regk_iop_trigger_grp_rise_fall_hi 0x00000007 +#define regk_iop_trigger_grp_rise_fall_lo 0x00000004 +#define regk_iop_trigger_grp_rise_hi 0x00000005 +#define regk_iop_trigger_grp_rw_cfg_default 0x000000c0 +#define regk_iop_trigger_grp_rw_cfg_size 0x00000004 +#define regk_iop_trigger_grp_rw_intr_mask_default 0x00000000 +#define regk_iop_trigger_grp_toggle 0x00000003 +#define regk_iop_trigger_grp_yes 0x00000001 +#endif /* __iop_trigger_grp_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_version_defs_asm.h b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_version_defs_asm.h new file mode 100644 index 000000000000..e13feb20a7e3 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/asm/iop_version_defs_asm.h @@ -0,0 +1,64 @@ +#ifndef __iop_version_defs_asm_h +#define __iop_version_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_version.r + * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp + * last modfied: Mon Apr 11 16:08:44 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_version_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_version.r + * id: $Id: iop_version_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_version, scope iop_version, type r */ +#define reg_iop_version_r_version___nr___lsb 0 +#define reg_iop_version_r_version___nr___width 8 +#define reg_iop_version_r_version_offset 0 + + +/* Constants */ +#define regk_iop_version_v1_0 0x00000001 +#endif /* __iop_version_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_crc_par_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_crc_par_defs.h new file mode 100644 index 000000000000..90e4785b6474 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_crc_par_defs.h @@ -0,0 +1,232 @@ +#ifndef __iop_crc_par_defs_h +#define __iop_crc_par_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_crc_par.r + * id: + * last modfied: Mon Apr 11 16:08:45 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_crc_par_defs.h ../../inst/io_proc/rtl/iop_crc_par.r + * id: $Id: iop_crc_par_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_crc_par */ + +/* Register rw_cfg, scope iop_crc_par, type rw */ +typedef struct { + unsigned int mode : 1; + unsigned int crc_out : 1; + unsigned int rev_out : 1; + unsigned int inv_out : 1; + unsigned int trig : 2; + unsigned int poly : 3; + unsigned int dummy1 : 23; +} reg_iop_crc_par_rw_cfg; +#define REG_RD_ADDR_iop_crc_par_rw_cfg 0 +#define REG_WR_ADDR_iop_crc_par_rw_cfg 0 + +/* Register rw_init_crc, scope iop_crc_par, type rw */ +typedef unsigned int reg_iop_crc_par_rw_init_crc; +#define REG_RD_ADDR_iop_crc_par_rw_init_crc 4 +#define REG_WR_ADDR_iop_crc_par_rw_init_crc 4 + +/* Register rw_correct_crc, scope iop_crc_par, type rw */ +typedef unsigned int reg_iop_crc_par_rw_correct_crc; +#define REG_RD_ADDR_iop_crc_par_rw_correct_crc 8 +#define REG_WR_ADDR_iop_crc_par_rw_correct_crc 8 + +/* Register rw_ctrl, scope iop_crc_par, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int dummy1 : 31; +} reg_iop_crc_par_rw_ctrl; +#define REG_RD_ADDR_iop_crc_par_rw_ctrl 12 +#define REG_WR_ADDR_iop_crc_par_rw_ctrl 12 + +/* Register rw_set_last, scope iop_crc_par, type rw */ +typedef struct { + unsigned int tr_dif : 1; + unsigned int dummy1 : 31; +} reg_iop_crc_par_rw_set_last; +#define REG_RD_ADDR_iop_crc_par_rw_set_last 16 +#define REG_WR_ADDR_iop_crc_par_rw_set_last 16 + +/* Register rw_wr1byte, scope iop_crc_par, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_iop_crc_par_rw_wr1byte; +#define REG_RD_ADDR_iop_crc_par_rw_wr1byte 20 +#define REG_WR_ADDR_iop_crc_par_rw_wr1byte 20 + +/* Register rw_wr2byte, scope iop_crc_par, type rw */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 16; +} reg_iop_crc_par_rw_wr2byte; +#define REG_RD_ADDR_iop_crc_par_rw_wr2byte 24 +#define REG_WR_ADDR_iop_crc_par_rw_wr2byte 24 + +/* Register rw_wr3byte, scope iop_crc_par, type rw */ +typedef struct { + unsigned int data : 24; + unsigned int dummy1 : 8; +} reg_iop_crc_par_rw_wr3byte; +#define REG_RD_ADDR_iop_crc_par_rw_wr3byte 28 +#define REG_WR_ADDR_iop_crc_par_rw_wr3byte 28 + +/* Register rw_wr4byte, scope iop_crc_par, type rw */ +typedef struct { + unsigned int data : 32; +} reg_iop_crc_par_rw_wr4byte; +#define REG_RD_ADDR_iop_crc_par_rw_wr4byte 32 +#define REG_WR_ADDR_iop_crc_par_rw_wr4byte 32 + +/* Register rw_wr1byte_last, scope iop_crc_par, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_iop_crc_par_rw_wr1byte_last; +#define REG_RD_ADDR_iop_crc_par_rw_wr1byte_last 36 +#define REG_WR_ADDR_iop_crc_par_rw_wr1byte_last 36 + +/* Register rw_wr2byte_last, scope iop_crc_par, type rw */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 16; +} reg_iop_crc_par_rw_wr2byte_last; +#define REG_RD_ADDR_iop_crc_par_rw_wr2byte_last 40 +#define REG_WR_ADDR_iop_crc_par_rw_wr2byte_last 40 + +/* Register rw_wr3byte_last, scope iop_crc_par, type rw */ +typedef struct { + unsigned int data : 24; + unsigned int dummy1 : 8; +} reg_iop_crc_par_rw_wr3byte_last; +#define REG_RD_ADDR_iop_crc_par_rw_wr3byte_last 44 +#define REG_WR_ADDR_iop_crc_par_rw_wr3byte_last 44 + +/* Register rw_wr4byte_last, scope iop_crc_par, type rw */ +typedef struct { + unsigned int data : 32; +} reg_iop_crc_par_rw_wr4byte_last; +#define REG_RD_ADDR_iop_crc_par_rw_wr4byte_last 48 +#define REG_WR_ADDR_iop_crc_par_rw_wr4byte_last 48 + +/* Register r_stat, scope iop_crc_par, type r */ +typedef struct { + unsigned int err : 1; + unsigned int busy : 1; + unsigned int dummy1 : 30; +} reg_iop_crc_par_r_stat; +#define REG_RD_ADDR_iop_crc_par_r_stat 52 + +/* Register r_sh_reg, scope iop_crc_par, type r */ +typedef unsigned int reg_iop_crc_par_r_sh_reg; +#define REG_RD_ADDR_iop_crc_par_r_sh_reg 56 + +/* Register r_crc, scope iop_crc_par, type r */ +typedef unsigned int reg_iop_crc_par_r_crc; +#define REG_RD_ADDR_iop_crc_par_r_crc 60 + +/* Register rw_strb_rec_dif_in, scope iop_crc_par, type rw */ +typedef struct { + unsigned int last : 2; + unsigned int dummy1 : 30; +} reg_iop_crc_par_rw_strb_rec_dif_in; +#define REG_RD_ADDR_iop_crc_par_rw_strb_rec_dif_in 64 +#define REG_WR_ADDR_iop_crc_par_rw_strb_rec_dif_in 64 + + +/* Constants */ +enum { + regk_iop_crc_par_calc = 0x00000001, + regk_iop_crc_par_ccitt = 0x00000002, + regk_iop_crc_par_check = 0x00000000, + regk_iop_crc_par_crc16 = 0x00000001, + regk_iop_crc_par_crc32 = 0x00000000, + regk_iop_crc_par_crc5 = 0x00000003, + regk_iop_crc_par_crc5_11 = 0x00000004, + regk_iop_crc_par_dif_in = 0x00000002, + regk_iop_crc_par_hi = 0x00000000, + regk_iop_crc_par_neg = 0x00000002, + regk_iop_crc_par_no = 0x00000000, + regk_iop_crc_par_pos = 0x00000001, + regk_iop_crc_par_pos_neg = 0x00000003, + regk_iop_crc_par_rw_cfg_default = 0x00000000, + regk_iop_crc_par_rw_ctrl_default = 0x00000000, + regk_iop_crc_par_yes = 0x00000001 +}; +#endif /* __iop_crc_par_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_dmc_in_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_dmc_in_defs.h new file mode 100644 index 000000000000..76aec6e37f3e --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_dmc_in_defs.h @@ -0,0 +1,325 @@ +#ifndef __iop_dmc_in_defs_h +#define __iop_dmc_in_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_dmc_in.r + * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_dmc_in_defs.h ../../inst/io_proc/rtl/iop_dmc_in.r + * id: $Id: iop_dmc_in_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_dmc_in */ + +/* Register rw_cfg, scope iop_dmc_in, type rw */ +typedef struct { + unsigned int sth_intr : 3; + unsigned int last_dis_dif : 1; + unsigned int dummy1 : 28; +} reg_iop_dmc_in_rw_cfg; +#define REG_RD_ADDR_iop_dmc_in_rw_cfg 0 +#define REG_WR_ADDR_iop_dmc_in_rw_cfg 0 + +/* Register rw_ctrl, scope iop_dmc_in, type rw */ +typedef struct { + unsigned int dif_en : 1; + unsigned int dif_dis : 1; + unsigned int stream_clr : 1; + unsigned int dummy1 : 29; +} reg_iop_dmc_in_rw_ctrl; +#define REG_RD_ADDR_iop_dmc_in_rw_ctrl 4 +#define REG_WR_ADDR_iop_dmc_in_rw_ctrl 4 + +/* Register r_stat, scope iop_dmc_in, type r */ +typedef struct { + unsigned int dif_en : 1; + unsigned int dummy1 : 31; +} reg_iop_dmc_in_r_stat; +#define REG_RD_ADDR_iop_dmc_in_r_stat 8 + +/* Register rw_stream_cmd, scope iop_dmc_in, type rw */ +typedef struct { + unsigned int cmd : 10; + unsigned int dummy1 : 6; + unsigned int n : 8; + unsigned int dummy2 : 8; +} reg_iop_dmc_in_rw_stream_cmd; +#define REG_RD_ADDR_iop_dmc_in_rw_stream_cmd 12 +#define REG_WR_ADDR_iop_dmc_in_rw_stream_cmd 12 + +/* Register rw_stream_wr_data, scope iop_dmc_in, type rw */ +typedef unsigned int reg_iop_dmc_in_rw_stream_wr_data; +#define REG_RD_ADDR_iop_dmc_in_rw_stream_wr_data 16 +#define REG_WR_ADDR_iop_dmc_in_rw_stream_wr_data 16 + +/* Register rw_stream_wr_data_last, scope iop_dmc_in, type rw */ +typedef unsigned int reg_iop_dmc_in_rw_stream_wr_data_last; +#define REG_RD_ADDR_iop_dmc_in_rw_stream_wr_data_last 20 +#define REG_WR_ADDR_iop_dmc_in_rw_stream_wr_data_last 20 + +/* Register rw_stream_ctrl, scope iop_dmc_in, type rw */ +typedef struct { + unsigned int eop : 1; + unsigned int wait : 1; + unsigned int keep_md : 1; + unsigned int size : 3; + unsigned int dummy1 : 26; +} reg_iop_dmc_in_rw_stream_ctrl; +#define REG_RD_ADDR_iop_dmc_in_rw_stream_ctrl 24 +#define REG_WR_ADDR_iop_dmc_in_rw_stream_ctrl 24 + +/* Register r_stream_stat, scope iop_dmc_in, type r */ +typedef struct { + unsigned int sth : 7; + unsigned int dummy1 : 9; + unsigned int full : 1; + unsigned int last_pkt : 1; + unsigned int data_md_valid : 1; + unsigned int ctxt_md_valid : 1; + unsigned int group_md_valid : 1; + unsigned int stream_busy : 1; + unsigned int cmd_rdy : 1; + unsigned int dummy2 : 9; +} reg_iop_dmc_in_r_stream_stat; +#define REG_RD_ADDR_iop_dmc_in_r_stream_stat 28 + +/* Register r_data_descr, scope iop_dmc_in, type r */ +typedef struct { + unsigned int ctrl : 8; + unsigned int stat : 8; + unsigned int md : 16; +} reg_iop_dmc_in_r_data_descr; +#define REG_RD_ADDR_iop_dmc_in_r_data_descr 32 + +/* Register r_ctxt_descr, scope iop_dmc_in, type r */ +typedef struct { + unsigned int ctrl : 8; + unsigned int stat : 8; + unsigned int md0 : 16; +} reg_iop_dmc_in_r_ctxt_descr; +#define REG_RD_ADDR_iop_dmc_in_r_ctxt_descr 36 + +/* Register r_ctxt_descr_md1, scope iop_dmc_in, type r */ +typedef unsigned int reg_iop_dmc_in_r_ctxt_descr_md1; +#define REG_RD_ADDR_iop_dmc_in_r_ctxt_descr_md1 40 + +/* Register r_ctxt_descr_md2, scope iop_dmc_in, type r */ +typedef unsigned int reg_iop_dmc_in_r_ctxt_descr_md2; +#define REG_RD_ADDR_iop_dmc_in_r_ctxt_descr_md2 44 + +/* Register r_group_descr, scope iop_dmc_in, type r */ +typedef struct { + unsigned int ctrl : 8; + unsigned int stat : 8; + unsigned int md : 16; +} reg_iop_dmc_in_r_group_descr; +#define REG_RD_ADDR_iop_dmc_in_r_group_descr 56 + +/* Register rw_data_descr, scope iop_dmc_in, type rw */ +typedef struct { + unsigned int dummy1 : 16; + unsigned int md : 16; +} reg_iop_dmc_in_rw_data_descr; +#define REG_RD_ADDR_iop_dmc_in_rw_data_descr 60 +#define REG_WR_ADDR_iop_dmc_in_rw_data_descr 60 + +/* Register rw_ctxt_descr, scope iop_dmc_in, type rw */ +typedef struct { + unsigned int dummy1 : 16; + unsigned int md0 : 16; +} reg_iop_dmc_in_rw_ctxt_descr; +#define REG_RD_ADDR_iop_dmc_in_rw_ctxt_descr 64 +#define REG_WR_ADDR_iop_dmc_in_rw_ctxt_descr 64 + +/* Register rw_ctxt_descr_md1, scope iop_dmc_in, type rw */ +typedef unsigned int reg_iop_dmc_in_rw_ctxt_descr_md1; +#define REG_RD_ADDR_iop_dmc_in_rw_ctxt_descr_md1 68 +#define REG_WR_ADDR_iop_dmc_in_rw_ctxt_descr_md1 68 + +/* Register rw_ctxt_descr_md2, scope iop_dmc_in, type rw */ +typedef unsigned int reg_iop_dmc_in_rw_ctxt_descr_md2; +#define REG_RD_ADDR_iop_dmc_in_rw_ctxt_descr_md2 72 +#define REG_WR_ADDR_iop_dmc_in_rw_ctxt_descr_md2 72 + +/* Register rw_group_descr, scope iop_dmc_in, type rw */ +typedef struct { + unsigned int dummy1 : 16; + unsigned int md : 16; +} reg_iop_dmc_in_rw_group_descr; +#define REG_RD_ADDR_iop_dmc_in_rw_group_descr 84 +#define REG_WR_ADDR_iop_dmc_in_rw_group_descr 84 + +/* Register rw_intr_mask, scope iop_dmc_in, type rw */ +typedef struct { + unsigned int data_md : 1; + unsigned int ctxt_md : 1; + unsigned int group_md : 1; + unsigned int cmd_rdy : 1; + unsigned int sth : 1; + unsigned int full : 1; + unsigned int dummy1 : 26; +} reg_iop_dmc_in_rw_intr_mask; +#define REG_RD_ADDR_iop_dmc_in_rw_intr_mask 88 +#define REG_WR_ADDR_iop_dmc_in_rw_intr_mask 88 + +/* Register rw_ack_intr, scope iop_dmc_in, type rw */ +typedef struct { + unsigned int data_md : 1; + unsigned int ctxt_md : 1; + unsigned int group_md : 1; + unsigned int cmd_rdy : 1; + unsigned int sth : 1; + unsigned int full : 1; + unsigned int dummy1 : 26; +} reg_iop_dmc_in_rw_ack_intr; +#define REG_RD_ADDR_iop_dmc_in_rw_ack_intr 92 +#define REG_WR_ADDR_iop_dmc_in_rw_ack_intr 92 + +/* Register r_intr, scope iop_dmc_in, type r */ +typedef struct { + unsigned int data_md : 1; + unsigned int ctxt_md : 1; + unsigned int group_md : 1; + unsigned int cmd_rdy : 1; + unsigned int sth : 1; + unsigned int full : 1; + unsigned int dummy1 : 26; +} reg_iop_dmc_in_r_intr; +#define REG_RD_ADDR_iop_dmc_in_r_intr 96 + +/* Register r_masked_intr, scope iop_dmc_in, type r */ +typedef struct { + unsigned int data_md : 1; + unsigned int ctxt_md : 1; + unsigned int group_md : 1; + unsigned int cmd_rdy : 1; + unsigned int sth : 1; + unsigned int full : 1; + unsigned int dummy1 : 26; +} reg_iop_dmc_in_r_masked_intr; +#define REG_RD_ADDR_iop_dmc_in_r_masked_intr 100 + + +/* Constants */ +enum { + regk_iop_dmc_in_ack_pkt = 0x00000100, + regk_iop_dmc_in_array = 0x00000008, + regk_iop_dmc_in_burst = 0x00000020, + regk_iop_dmc_in_copy_next = 0x00000010, + regk_iop_dmc_in_copy_up = 0x00000020, + regk_iop_dmc_in_dis_c = 0x00000010, + regk_iop_dmc_in_dis_g = 0x00000020, + regk_iop_dmc_in_lim1 = 0x00000000, + regk_iop_dmc_in_lim16 = 0x00000004, + regk_iop_dmc_in_lim2 = 0x00000001, + regk_iop_dmc_in_lim32 = 0x00000005, + regk_iop_dmc_in_lim4 = 0x00000002, + regk_iop_dmc_in_lim64 = 0x00000006, + regk_iop_dmc_in_lim8 = 0x00000003, + regk_iop_dmc_in_load_c = 0x00000200, + regk_iop_dmc_in_load_c_n = 0x00000280, + regk_iop_dmc_in_load_c_next = 0x00000240, + regk_iop_dmc_in_load_d = 0x00000140, + regk_iop_dmc_in_load_g = 0x00000300, + regk_iop_dmc_in_load_g_down = 0x000003c0, + regk_iop_dmc_in_load_g_next = 0x00000340, + regk_iop_dmc_in_load_g_up = 0x00000380, + regk_iop_dmc_in_next_en = 0x00000010, + regk_iop_dmc_in_next_pkt = 0x00000010, + regk_iop_dmc_in_no = 0x00000000, + regk_iop_dmc_in_restore = 0x00000020, + regk_iop_dmc_in_rw_cfg_default = 0x00000000, + regk_iop_dmc_in_rw_ctxt_descr_default = 0x00000000, + regk_iop_dmc_in_rw_ctxt_descr_md1_default = 0x00000000, + regk_iop_dmc_in_rw_ctxt_descr_md2_default = 0x00000000, + regk_iop_dmc_in_rw_data_descr_default = 0x00000000, + regk_iop_dmc_in_rw_group_descr_default = 0x00000000, + regk_iop_dmc_in_rw_intr_mask_default = 0x00000000, + regk_iop_dmc_in_rw_stream_ctrl_default = 0x00000000, + regk_iop_dmc_in_save_down = 0x00000020, + regk_iop_dmc_in_save_up = 0x00000020, + regk_iop_dmc_in_set_reg = 0x00000050, + regk_iop_dmc_in_set_w_size1 = 0x00000190, + regk_iop_dmc_in_set_w_size2 = 0x000001a0, + regk_iop_dmc_in_set_w_size4 = 0x000001c0, + regk_iop_dmc_in_store_c = 0x00000002, + regk_iop_dmc_in_store_descr = 0x00000000, + regk_iop_dmc_in_store_g = 0x00000004, + regk_iop_dmc_in_store_md = 0x00000001, + regk_iop_dmc_in_update_down = 0x00000020, + regk_iop_dmc_in_yes = 0x00000001 +}; +#endif /* __iop_dmc_in_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_dmc_out_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_dmc_out_defs.h new file mode 100644 index 000000000000..938a0d4c4604 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_dmc_out_defs.h @@ -0,0 +1,326 @@ +#ifndef __iop_dmc_out_defs_h +#define __iop_dmc_out_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_dmc_out.r + * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_dmc_out_defs.h ../../inst/io_proc/rtl/iop_dmc_out.r + * id: $Id: iop_dmc_out_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_dmc_out */ + +/* Register rw_cfg, scope iop_dmc_out, type rw */ +typedef struct { + unsigned int trf_lim : 16; + unsigned int last_at_trf_lim : 1; + unsigned int dth_intr : 3; + unsigned int dummy1 : 12; +} reg_iop_dmc_out_rw_cfg; +#define REG_RD_ADDR_iop_dmc_out_rw_cfg 0 +#define REG_WR_ADDR_iop_dmc_out_rw_cfg 0 + +/* Register rw_ctrl, scope iop_dmc_out, type rw */ +typedef struct { + unsigned int dif_en : 1; + unsigned int dif_dis : 1; + unsigned int dummy1 : 30; +} reg_iop_dmc_out_rw_ctrl; +#define REG_RD_ADDR_iop_dmc_out_rw_ctrl 4 +#define REG_WR_ADDR_iop_dmc_out_rw_ctrl 4 + +/* Register r_stat, scope iop_dmc_out, type r */ +typedef struct { + unsigned int dif_en : 1; + unsigned int dummy1 : 31; +} reg_iop_dmc_out_r_stat; +#define REG_RD_ADDR_iop_dmc_out_r_stat 8 + +/* Register rw_stream_cmd, scope iop_dmc_out, type rw */ +typedef struct { + unsigned int cmd : 10; + unsigned int dummy1 : 6; + unsigned int n : 8; + unsigned int dummy2 : 8; +} reg_iop_dmc_out_rw_stream_cmd; +#define REG_RD_ADDR_iop_dmc_out_rw_stream_cmd 12 +#define REG_WR_ADDR_iop_dmc_out_rw_stream_cmd 12 + +/* Register rs_stream_data, scope iop_dmc_out, type rs */ +typedef unsigned int reg_iop_dmc_out_rs_stream_data; +#define REG_RD_ADDR_iop_dmc_out_rs_stream_data 16 + +/* Register r_stream_data, scope iop_dmc_out, type r */ +typedef unsigned int reg_iop_dmc_out_r_stream_data; +#define REG_RD_ADDR_iop_dmc_out_r_stream_data 20 + +/* Register r_stream_stat, scope iop_dmc_out, type r */ +typedef struct { + unsigned int dth : 7; + unsigned int dummy1 : 9; + unsigned int dv : 1; + unsigned int all_avail : 1; + unsigned int last : 1; + unsigned int size : 3; + unsigned int data_md_valid : 1; + unsigned int ctxt_md_valid : 1; + unsigned int group_md_valid : 1; + unsigned int stream_busy : 1; + unsigned int cmd_rdy : 1; + unsigned int cmd_rq : 1; + unsigned int dummy2 : 4; +} reg_iop_dmc_out_r_stream_stat; +#define REG_RD_ADDR_iop_dmc_out_r_stream_stat 24 + +/* Register r_data_descr, scope iop_dmc_out, type r */ +typedef struct { + unsigned int ctrl : 8; + unsigned int stat : 8; + unsigned int md : 16; +} reg_iop_dmc_out_r_data_descr; +#define REG_RD_ADDR_iop_dmc_out_r_data_descr 28 + +/* Register r_ctxt_descr, scope iop_dmc_out, type r */ +typedef struct { + unsigned int ctrl : 8; + unsigned int stat : 8; + unsigned int md0 : 16; +} reg_iop_dmc_out_r_ctxt_descr; +#define REG_RD_ADDR_iop_dmc_out_r_ctxt_descr 32 + +/* Register r_ctxt_descr_md1, scope iop_dmc_out, type r */ +typedef unsigned int reg_iop_dmc_out_r_ctxt_descr_md1; +#define REG_RD_ADDR_iop_dmc_out_r_ctxt_descr_md1 36 + +/* Register r_ctxt_descr_md2, scope iop_dmc_out, type r */ +typedef unsigned int reg_iop_dmc_out_r_ctxt_descr_md2; +#define REG_RD_ADDR_iop_dmc_out_r_ctxt_descr_md2 40 + +/* Register r_group_descr, scope iop_dmc_out, type r */ +typedef struct { + unsigned int ctrl : 8; + unsigned int stat : 8; + unsigned int md : 16; +} reg_iop_dmc_out_r_group_descr; +#define REG_RD_ADDR_iop_dmc_out_r_group_descr 52 + +/* Register rw_data_descr, scope iop_dmc_out, type rw */ +typedef struct { + unsigned int dummy1 : 16; + unsigned int md : 16; +} reg_iop_dmc_out_rw_data_descr; +#define REG_RD_ADDR_iop_dmc_out_rw_data_descr 56 +#define REG_WR_ADDR_iop_dmc_out_rw_data_descr 56 + +/* Register rw_ctxt_descr, scope iop_dmc_out, type rw */ +typedef struct { + unsigned int dummy1 : 16; + unsigned int md0 : 16; +} reg_iop_dmc_out_rw_ctxt_descr; +#define REG_RD_ADDR_iop_dmc_out_rw_ctxt_descr 60 +#define REG_WR_ADDR_iop_dmc_out_rw_ctxt_descr 60 + +/* Register rw_ctxt_descr_md1, scope iop_dmc_out, type rw */ +typedef unsigned int reg_iop_dmc_out_rw_ctxt_descr_md1; +#define REG_RD_ADDR_iop_dmc_out_rw_ctxt_descr_md1 64 +#define REG_WR_ADDR_iop_dmc_out_rw_ctxt_descr_md1 64 + +/* Register rw_ctxt_descr_md2, scope iop_dmc_out, type rw */ +typedef unsigned int reg_iop_dmc_out_rw_ctxt_descr_md2; +#define REG_RD_ADDR_iop_dmc_out_rw_ctxt_descr_md2 68 +#define REG_WR_ADDR_iop_dmc_out_rw_ctxt_descr_md2 68 + +/* Register rw_group_descr, scope iop_dmc_out, type rw */ +typedef struct { + unsigned int dummy1 : 16; + unsigned int md : 16; +} reg_iop_dmc_out_rw_group_descr; +#define REG_RD_ADDR_iop_dmc_out_rw_group_descr 80 +#define REG_WR_ADDR_iop_dmc_out_rw_group_descr 80 + +/* Register rw_intr_mask, scope iop_dmc_out, type rw */ +typedef struct { + unsigned int data_md : 1; + unsigned int ctxt_md : 1; + unsigned int group_md : 1; + unsigned int cmd_rdy : 1; + unsigned int dth : 1; + unsigned int dv : 1; + unsigned int last_data : 1; + unsigned int trf_lim : 1; + unsigned int cmd_rq : 1; + unsigned int dummy1 : 23; +} reg_iop_dmc_out_rw_intr_mask; +#define REG_RD_ADDR_iop_dmc_out_rw_intr_mask 84 +#define REG_WR_ADDR_iop_dmc_out_rw_intr_mask 84 + +/* Register rw_ack_intr, scope iop_dmc_out, type rw */ +typedef struct { + unsigned int data_md : 1; + unsigned int ctxt_md : 1; + unsigned int group_md : 1; + unsigned int cmd_rdy : 1; + unsigned int dth : 1; + unsigned int dv : 1; + unsigned int last_data : 1; + unsigned int trf_lim : 1; + unsigned int cmd_rq : 1; + unsigned int dummy1 : 23; +} reg_iop_dmc_out_rw_ack_intr; +#define REG_RD_ADDR_iop_dmc_out_rw_ack_intr 88 +#define REG_WR_ADDR_iop_dmc_out_rw_ack_intr 88 + +/* Register r_intr, scope iop_dmc_out, type r */ +typedef struct { + unsigned int data_md : 1; + unsigned int ctxt_md : 1; + unsigned int group_md : 1; + unsigned int cmd_rdy : 1; + unsigned int dth : 1; + unsigned int dv : 1; + unsigned int last_data : 1; + unsigned int trf_lim : 1; + unsigned int cmd_rq : 1; + unsigned int dummy1 : 23; +} reg_iop_dmc_out_r_intr; +#define REG_RD_ADDR_iop_dmc_out_r_intr 92 + +/* Register r_masked_intr, scope iop_dmc_out, type r */ +typedef struct { + unsigned int data_md : 1; + unsigned int ctxt_md : 1; + unsigned int group_md : 1; + unsigned int cmd_rdy : 1; + unsigned int dth : 1; + unsigned int dv : 1; + unsigned int last_data : 1; + unsigned int trf_lim : 1; + unsigned int cmd_rq : 1; + unsigned int dummy1 : 23; +} reg_iop_dmc_out_r_masked_intr; +#define REG_RD_ADDR_iop_dmc_out_r_masked_intr 96 + + +/* Constants */ +enum { + regk_iop_dmc_out_ack_pkt = 0x00000100, + regk_iop_dmc_out_array = 0x00000008, + regk_iop_dmc_out_burst = 0x00000020, + regk_iop_dmc_out_copy_next = 0x00000010, + regk_iop_dmc_out_copy_up = 0x00000020, + regk_iop_dmc_out_dis_c = 0x00000010, + regk_iop_dmc_out_dis_g = 0x00000020, + regk_iop_dmc_out_lim1 = 0x00000000, + regk_iop_dmc_out_lim16 = 0x00000004, + regk_iop_dmc_out_lim2 = 0x00000001, + regk_iop_dmc_out_lim32 = 0x00000005, + regk_iop_dmc_out_lim4 = 0x00000002, + regk_iop_dmc_out_lim64 = 0x00000006, + regk_iop_dmc_out_lim8 = 0x00000003, + regk_iop_dmc_out_load_c = 0x00000200, + regk_iop_dmc_out_load_c_n = 0x00000280, + regk_iop_dmc_out_load_c_next = 0x00000240, + regk_iop_dmc_out_load_d = 0x00000140, + regk_iop_dmc_out_load_g = 0x00000300, + regk_iop_dmc_out_load_g_down = 0x000003c0, + regk_iop_dmc_out_load_g_next = 0x00000340, + regk_iop_dmc_out_load_g_up = 0x00000380, + regk_iop_dmc_out_next_en = 0x00000010, + regk_iop_dmc_out_next_pkt = 0x00000010, + regk_iop_dmc_out_no = 0x00000000, + regk_iop_dmc_out_restore = 0x00000020, + regk_iop_dmc_out_rw_cfg_default = 0x00000000, + regk_iop_dmc_out_rw_ctxt_descr_default = 0x00000000, + regk_iop_dmc_out_rw_ctxt_descr_md1_default = 0x00000000, + regk_iop_dmc_out_rw_ctxt_descr_md2_default = 0x00000000, + regk_iop_dmc_out_rw_data_descr_default = 0x00000000, + regk_iop_dmc_out_rw_group_descr_default = 0x00000000, + regk_iop_dmc_out_rw_intr_mask_default = 0x00000000, + regk_iop_dmc_out_save_down = 0x00000020, + regk_iop_dmc_out_save_up = 0x00000020, + regk_iop_dmc_out_set_reg = 0x00000050, + regk_iop_dmc_out_set_w_size1 = 0x00000190, + regk_iop_dmc_out_set_w_size2 = 0x000001a0, + regk_iop_dmc_out_set_w_size4 = 0x000001c0, + regk_iop_dmc_out_store_c = 0x00000002, + regk_iop_dmc_out_store_descr = 0x00000000, + regk_iop_dmc_out_store_g = 0x00000004, + regk_iop_dmc_out_store_md = 0x00000001, + regk_iop_dmc_out_update_down = 0x00000020, + regk_iop_dmc_out_yes = 0x00000001 +}; +#endif /* __iop_dmc_out_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_in_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_in_defs.h new file mode 100644 index 000000000000..e0c982b263fa --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_in_defs.h @@ -0,0 +1,255 @@ +#ifndef __iop_fifo_in_defs_h +#define __iop_fifo_in_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_fifo_in.r + * id: + * last modfied: Mon Apr 11 16:10:07 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_in_defs.h ../../inst/io_proc/rtl/iop_fifo_in.r + * id: $Id: iop_fifo_in_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_fifo_in */ + +/* Register rw_cfg, scope iop_fifo_in, type rw */ +typedef struct { + unsigned int avail_lim : 3; + unsigned int byte_order : 2; + unsigned int trig : 2; + unsigned int last_dis_dif_in : 1; + unsigned int mode : 2; + unsigned int dummy1 : 22; +} reg_iop_fifo_in_rw_cfg; +#define REG_RD_ADDR_iop_fifo_in_rw_cfg 0 +#define REG_WR_ADDR_iop_fifo_in_rw_cfg 0 + +/* Register rw_ctrl, scope iop_fifo_in, type rw */ +typedef struct { + unsigned int dif_in_en : 1; + unsigned int dif_out_en : 1; + unsigned int dummy1 : 30; +} reg_iop_fifo_in_rw_ctrl; +#define REG_RD_ADDR_iop_fifo_in_rw_ctrl 4 +#define REG_WR_ADDR_iop_fifo_in_rw_ctrl 4 + +/* Register r_stat, scope iop_fifo_in, type r */ +typedef struct { + unsigned int avail_bytes : 4; + unsigned int last : 8; + unsigned int dif_in_en : 1; + unsigned int dif_out_en : 1; + unsigned int dummy1 : 18; +} reg_iop_fifo_in_r_stat; +#define REG_RD_ADDR_iop_fifo_in_r_stat 8 + +/* Register rs_rd1byte, scope iop_fifo_in, type rs */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_iop_fifo_in_rs_rd1byte; +#define REG_RD_ADDR_iop_fifo_in_rs_rd1byte 12 + +/* Register r_rd1byte, scope iop_fifo_in, type r */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_iop_fifo_in_r_rd1byte; +#define REG_RD_ADDR_iop_fifo_in_r_rd1byte 16 + +/* Register rs_rd2byte, scope iop_fifo_in, type rs */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 16; +} reg_iop_fifo_in_rs_rd2byte; +#define REG_RD_ADDR_iop_fifo_in_rs_rd2byte 20 + +/* Register r_rd2byte, scope iop_fifo_in, type r */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 16; +} reg_iop_fifo_in_r_rd2byte; +#define REG_RD_ADDR_iop_fifo_in_r_rd2byte 24 + +/* Register rs_rd3byte, scope iop_fifo_in, type rs */ +typedef struct { + unsigned int data : 24; + unsigned int dummy1 : 8; +} reg_iop_fifo_in_rs_rd3byte; +#define REG_RD_ADDR_iop_fifo_in_rs_rd3byte 28 + +/* Register r_rd3byte, scope iop_fifo_in, type r */ +typedef struct { + unsigned int data : 24; + unsigned int dummy1 : 8; +} reg_iop_fifo_in_r_rd3byte; +#define REG_RD_ADDR_iop_fifo_in_r_rd3byte 32 + +/* Register rs_rd4byte, scope iop_fifo_in, type rs */ +typedef struct { + unsigned int data : 32; +} reg_iop_fifo_in_rs_rd4byte; +#define REG_RD_ADDR_iop_fifo_in_rs_rd4byte 36 + +/* Register r_rd4byte, scope iop_fifo_in, type r */ +typedef struct { + unsigned int data : 32; +} reg_iop_fifo_in_r_rd4byte; +#define REG_RD_ADDR_iop_fifo_in_r_rd4byte 40 + +/* Register rw_set_last, scope iop_fifo_in, type rw */ +typedef unsigned int reg_iop_fifo_in_rw_set_last; +#define REG_RD_ADDR_iop_fifo_in_rw_set_last 44 +#define REG_WR_ADDR_iop_fifo_in_rw_set_last 44 + +/* Register rw_strb_dif_in, scope iop_fifo_in, type rw */ +typedef struct { + unsigned int last : 2; + unsigned int dummy1 : 30; +} reg_iop_fifo_in_rw_strb_dif_in; +#define REG_RD_ADDR_iop_fifo_in_rw_strb_dif_in 48 +#define REG_WR_ADDR_iop_fifo_in_rw_strb_dif_in 48 + +/* Register rw_intr_mask, scope iop_fifo_in, type rw */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int avail : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_in_rw_intr_mask; +#define REG_RD_ADDR_iop_fifo_in_rw_intr_mask 52 +#define REG_WR_ADDR_iop_fifo_in_rw_intr_mask 52 + +/* Register rw_ack_intr, scope iop_fifo_in, type rw */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int avail : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_in_rw_ack_intr; +#define REG_RD_ADDR_iop_fifo_in_rw_ack_intr 56 +#define REG_WR_ADDR_iop_fifo_in_rw_ack_intr 56 + +/* Register r_intr, scope iop_fifo_in, type r */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int avail : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_in_r_intr; +#define REG_RD_ADDR_iop_fifo_in_r_intr 60 + +/* Register r_masked_intr, scope iop_fifo_in, type r */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int avail : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_in_r_masked_intr; +#define REG_RD_ADDR_iop_fifo_in_r_masked_intr 64 + + +/* Constants */ +enum { + regk_iop_fifo_in_dif_in = 0x00000002, + regk_iop_fifo_in_hi = 0x00000000, + regk_iop_fifo_in_neg = 0x00000002, + regk_iop_fifo_in_no = 0x00000000, + regk_iop_fifo_in_order16 = 0x00000001, + regk_iop_fifo_in_order24 = 0x00000002, + regk_iop_fifo_in_order32 = 0x00000003, + regk_iop_fifo_in_order8 = 0x00000000, + regk_iop_fifo_in_pos = 0x00000001, + regk_iop_fifo_in_pos_neg = 0x00000003, + regk_iop_fifo_in_rw_cfg_default = 0x00000024, + regk_iop_fifo_in_rw_ctrl_default = 0x00000000, + regk_iop_fifo_in_rw_intr_mask_default = 0x00000000, + regk_iop_fifo_in_rw_set_last_default = 0x00000000, + regk_iop_fifo_in_rw_strb_dif_in_default = 0x00000000, + regk_iop_fifo_in_size16 = 0x00000002, + regk_iop_fifo_in_size24 = 0x00000001, + regk_iop_fifo_in_size32 = 0x00000000, + regk_iop_fifo_in_size8 = 0x00000003, + regk_iop_fifo_in_yes = 0x00000001 +}; +#endif /* __iop_fifo_in_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_in_extra_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_in_extra_defs.h new file mode 100644 index 000000000000..798ac95870e9 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_in_extra_defs.h @@ -0,0 +1,164 @@ +#ifndef __iop_fifo_in_extra_defs_h +#define __iop_fifo_in_extra_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_fifo_in_extra.r + * id: + * last modfied: Mon Apr 11 16:10:08 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_in_extra_defs.h ../../inst/io_proc/rtl/iop_fifo_in_extra.r + * id: $Id: iop_fifo_in_extra_defs.h,v 1.1 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_fifo_in_extra */ + +/* Register rw_wr_data, scope iop_fifo_in_extra, type rw */ +typedef unsigned int reg_iop_fifo_in_extra_rw_wr_data; +#define REG_RD_ADDR_iop_fifo_in_extra_rw_wr_data 0 +#define REG_WR_ADDR_iop_fifo_in_extra_rw_wr_data 0 + +/* Register r_stat, scope iop_fifo_in_extra, type r */ +typedef struct { + unsigned int avail_bytes : 4; + unsigned int last : 8; + unsigned int dif_in_en : 1; + unsigned int dif_out_en : 1; + unsigned int dummy1 : 18; +} reg_iop_fifo_in_extra_r_stat; +#define REG_RD_ADDR_iop_fifo_in_extra_r_stat 4 + +/* Register rw_strb_dif_in, scope iop_fifo_in_extra, type rw */ +typedef struct { + unsigned int last : 2; + unsigned int dummy1 : 30; +} reg_iop_fifo_in_extra_rw_strb_dif_in; +#define REG_RD_ADDR_iop_fifo_in_extra_rw_strb_dif_in 8 +#define REG_WR_ADDR_iop_fifo_in_extra_rw_strb_dif_in 8 + +/* Register rw_intr_mask, scope iop_fifo_in_extra, type rw */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int avail : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_in_extra_rw_intr_mask; +#define REG_RD_ADDR_iop_fifo_in_extra_rw_intr_mask 12 +#define REG_WR_ADDR_iop_fifo_in_extra_rw_intr_mask 12 + +/* Register rw_ack_intr, scope iop_fifo_in_extra, type rw */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int avail : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_in_extra_rw_ack_intr; +#define REG_RD_ADDR_iop_fifo_in_extra_rw_ack_intr 16 +#define REG_WR_ADDR_iop_fifo_in_extra_rw_ack_intr 16 + +/* Register r_intr, scope iop_fifo_in_extra, type r */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int avail : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_in_extra_r_intr; +#define REG_RD_ADDR_iop_fifo_in_extra_r_intr 20 + +/* Register r_masked_intr, scope iop_fifo_in_extra, type r */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int avail : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_in_extra_r_masked_intr; +#define REG_RD_ADDR_iop_fifo_in_extra_r_masked_intr 24 + + +/* Constants */ +enum { + regk_iop_fifo_in_extra_fifo_in = 0x00000002, + regk_iop_fifo_in_extra_no = 0x00000000, + regk_iop_fifo_in_extra_rw_intr_mask_default = 0x00000000, + regk_iop_fifo_in_extra_yes = 0x00000001 +}; +#endif /* __iop_fifo_in_extra_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_out_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_out_defs.h new file mode 100644 index 000000000000..833e10f02526 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_out_defs.h @@ -0,0 +1,278 @@ +#ifndef __iop_fifo_out_defs_h +#define __iop_fifo_out_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_fifo_out.r + * id: + * last modfied: Mon Apr 11 16:10:09 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_out_defs.h ../../inst/io_proc/rtl/iop_fifo_out.r + * id: $Id: iop_fifo_out_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_fifo_out */ + +/* Register rw_cfg, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int free_lim : 3; + unsigned int byte_order : 2; + unsigned int trig : 2; + unsigned int last_dis_dif_in : 1; + unsigned int mode : 2; + unsigned int delay_out_last : 1; + unsigned int last_dis_dif_out : 1; + unsigned int dummy1 : 20; +} reg_iop_fifo_out_rw_cfg; +#define REG_RD_ADDR_iop_fifo_out_rw_cfg 0 +#define REG_WR_ADDR_iop_fifo_out_rw_cfg 0 + +/* Register rw_ctrl, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int dif_in_en : 1; + unsigned int dif_out_en : 1; + unsigned int dummy1 : 30; +} reg_iop_fifo_out_rw_ctrl; +#define REG_RD_ADDR_iop_fifo_out_rw_ctrl 4 +#define REG_WR_ADDR_iop_fifo_out_rw_ctrl 4 + +/* Register r_stat, scope iop_fifo_out, type r */ +typedef struct { + unsigned int avail_bytes : 4; + unsigned int last : 8; + unsigned int dif_in_en : 1; + unsigned int dif_out_en : 1; + unsigned int zero_data_last : 1; + unsigned int dummy1 : 17; +} reg_iop_fifo_out_r_stat; +#define REG_RD_ADDR_iop_fifo_out_r_stat 8 + +/* Register rw_wr1byte, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_iop_fifo_out_rw_wr1byte; +#define REG_RD_ADDR_iop_fifo_out_rw_wr1byte 12 +#define REG_WR_ADDR_iop_fifo_out_rw_wr1byte 12 + +/* Register rw_wr2byte, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 16; +} reg_iop_fifo_out_rw_wr2byte; +#define REG_RD_ADDR_iop_fifo_out_rw_wr2byte 16 +#define REG_WR_ADDR_iop_fifo_out_rw_wr2byte 16 + +/* Register rw_wr3byte, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int data : 24; + unsigned int dummy1 : 8; +} reg_iop_fifo_out_rw_wr3byte; +#define REG_RD_ADDR_iop_fifo_out_rw_wr3byte 20 +#define REG_WR_ADDR_iop_fifo_out_rw_wr3byte 20 + +/* Register rw_wr4byte, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int data : 32; +} reg_iop_fifo_out_rw_wr4byte; +#define REG_RD_ADDR_iop_fifo_out_rw_wr4byte 24 +#define REG_WR_ADDR_iop_fifo_out_rw_wr4byte 24 + +/* Register rw_wr1byte_last, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_iop_fifo_out_rw_wr1byte_last; +#define REG_RD_ADDR_iop_fifo_out_rw_wr1byte_last 28 +#define REG_WR_ADDR_iop_fifo_out_rw_wr1byte_last 28 + +/* Register rw_wr2byte_last, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 16; +} reg_iop_fifo_out_rw_wr2byte_last; +#define REG_RD_ADDR_iop_fifo_out_rw_wr2byte_last 32 +#define REG_WR_ADDR_iop_fifo_out_rw_wr2byte_last 32 + +/* Register rw_wr3byte_last, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int data : 24; + unsigned int dummy1 : 8; +} reg_iop_fifo_out_rw_wr3byte_last; +#define REG_RD_ADDR_iop_fifo_out_rw_wr3byte_last 36 +#define REG_WR_ADDR_iop_fifo_out_rw_wr3byte_last 36 + +/* Register rw_wr4byte_last, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int data : 32; +} reg_iop_fifo_out_rw_wr4byte_last; +#define REG_RD_ADDR_iop_fifo_out_rw_wr4byte_last 40 +#define REG_WR_ADDR_iop_fifo_out_rw_wr4byte_last 40 + +/* Register rw_set_last, scope iop_fifo_out, type rw */ +typedef unsigned int reg_iop_fifo_out_rw_set_last; +#define REG_RD_ADDR_iop_fifo_out_rw_set_last 44 +#define REG_WR_ADDR_iop_fifo_out_rw_set_last 44 + +/* Register rs_rd_data, scope iop_fifo_out, type rs */ +typedef unsigned int reg_iop_fifo_out_rs_rd_data; +#define REG_RD_ADDR_iop_fifo_out_rs_rd_data 48 + +/* Register r_rd_data, scope iop_fifo_out, type r */ +typedef unsigned int reg_iop_fifo_out_r_rd_data; +#define REG_RD_ADDR_iop_fifo_out_r_rd_data 52 + +/* Register rw_strb_dif_out, scope iop_fifo_out, type rw */ +typedef unsigned int reg_iop_fifo_out_rw_strb_dif_out; +#define REG_RD_ADDR_iop_fifo_out_rw_strb_dif_out 56 +#define REG_WR_ADDR_iop_fifo_out_rw_strb_dif_out 56 + +/* Register rw_intr_mask, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int free : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_out_rw_intr_mask; +#define REG_RD_ADDR_iop_fifo_out_rw_intr_mask 60 +#define REG_WR_ADDR_iop_fifo_out_rw_intr_mask 60 + +/* Register rw_ack_intr, scope iop_fifo_out, type rw */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int free : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_out_rw_ack_intr; +#define REG_RD_ADDR_iop_fifo_out_rw_ack_intr 64 +#define REG_WR_ADDR_iop_fifo_out_rw_ack_intr 64 + +/* Register r_intr, scope iop_fifo_out, type r */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int free : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_out_r_intr; +#define REG_RD_ADDR_iop_fifo_out_r_intr 68 + +/* Register r_masked_intr, scope iop_fifo_out, type r */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int free : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_out_r_masked_intr; +#define REG_RD_ADDR_iop_fifo_out_r_masked_intr 72 + + +/* Constants */ +enum { + regk_iop_fifo_out_hi = 0x00000000, + regk_iop_fifo_out_neg = 0x00000002, + regk_iop_fifo_out_no = 0x00000000, + regk_iop_fifo_out_order16 = 0x00000001, + regk_iop_fifo_out_order24 = 0x00000002, + regk_iop_fifo_out_order32 = 0x00000003, + regk_iop_fifo_out_order8 = 0x00000000, + regk_iop_fifo_out_pos = 0x00000001, + regk_iop_fifo_out_pos_neg = 0x00000003, + regk_iop_fifo_out_rw_cfg_default = 0x00000024, + regk_iop_fifo_out_rw_ctrl_default = 0x00000000, + regk_iop_fifo_out_rw_intr_mask_default = 0x00000000, + regk_iop_fifo_out_rw_set_last_default = 0x00000000, + regk_iop_fifo_out_rw_strb_dif_out_default = 0x00000000, + regk_iop_fifo_out_rw_wr1byte_default = 0x00000000, + regk_iop_fifo_out_rw_wr1byte_last_default = 0x00000000, + regk_iop_fifo_out_rw_wr2byte_default = 0x00000000, + regk_iop_fifo_out_rw_wr2byte_last_default = 0x00000000, + regk_iop_fifo_out_rw_wr3byte_default = 0x00000000, + regk_iop_fifo_out_rw_wr3byte_last_default = 0x00000000, + regk_iop_fifo_out_rw_wr4byte_default = 0x00000000, + regk_iop_fifo_out_rw_wr4byte_last_default = 0x00000000, + regk_iop_fifo_out_size16 = 0x00000002, + regk_iop_fifo_out_size24 = 0x00000001, + regk_iop_fifo_out_size32 = 0x00000000, + regk_iop_fifo_out_size8 = 0x00000003, + regk_iop_fifo_out_yes = 0x00000001 +}; +#endif /* __iop_fifo_out_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_out_extra_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_out_extra_defs.h new file mode 100644 index 000000000000..4a840aae84ee --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_fifo_out_extra_defs.h @@ -0,0 +1,164 @@ +#ifndef __iop_fifo_out_extra_defs_h +#define __iop_fifo_out_extra_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_fifo_out_extra.r + * id: + * last modfied: Mon Apr 11 16:10:10 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_out_extra_defs.h ../../inst/io_proc/rtl/iop_fifo_out_extra.r + * id: $Id: iop_fifo_out_extra_defs.h,v 1.1 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_fifo_out_extra */ + +/* Register rs_rd_data, scope iop_fifo_out_extra, type rs */ +typedef unsigned int reg_iop_fifo_out_extra_rs_rd_data; +#define REG_RD_ADDR_iop_fifo_out_extra_rs_rd_data 0 + +/* Register r_rd_data, scope iop_fifo_out_extra, type r */ +typedef unsigned int reg_iop_fifo_out_extra_r_rd_data; +#define REG_RD_ADDR_iop_fifo_out_extra_r_rd_data 4 + +/* Register r_stat, scope iop_fifo_out_extra, type r */ +typedef struct { + unsigned int avail_bytes : 4; + unsigned int last : 8; + unsigned int dif_in_en : 1; + unsigned int dif_out_en : 1; + unsigned int zero_data_last : 1; + unsigned int dummy1 : 17; +} reg_iop_fifo_out_extra_r_stat; +#define REG_RD_ADDR_iop_fifo_out_extra_r_stat 8 + +/* Register rw_strb_dif_out, scope iop_fifo_out_extra, type rw */ +typedef unsigned int reg_iop_fifo_out_extra_rw_strb_dif_out; +#define REG_RD_ADDR_iop_fifo_out_extra_rw_strb_dif_out 12 +#define REG_WR_ADDR_iop_fifo_out_extra_rw_strb_dif_out 12 + +/* Register rw_intr_mask, scope iop_fifo_out_extra, type rw */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int free : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_out_extra_rw_intr_mask; +#define REG_RD_ADDR_iop_fifo_out_extra_rw_intr_mask 16 +#define REG_WR_ADDR_iop_fifo_out_extra_rw_intr_mask 16 + +/* Register rw_ack_intr, scope iop_fifo_out_extra, type rw */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int free : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_out_extra_rw_ack_intr; +#define REG_RD_ADDR_iop_fifo_out_extra_rw_ack_intr 20 +#define REG_WR_ADDR_iop_fifo_out_extra_rw_ack_intr 20 + +/* Register r_intr, scope iop_fifo_out_extra, type r */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int free : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_out_extra_r_intr; +#define REG_RD_ADDR_iop_fifo_out_extra_r_intr 24 + +/* Register r_masked_intr, scope iop_fifo_out_extra, type r */ +typedef struct { + unsigned int urun : 1; + unsigned int last_data : 1; + unsigned int dav : 1; + unsigned int free : 1; + unsigned int orun : 1; + unsigned int dummy1 : 27; +} reg_iop_fifo_out_extra_r_masked_intr; +#define REG_RD_ADDR_iop_fifo_out_extra_r_masked_intr 28 + + +/* Constants */ +enum { + regk_iop_fifo_out_extra_no = 0x00000000, + regk_iop_fifo_out_extra_rw_intr_mask_default = 0x00000000, + regk_iop_fifo_out_extra_yes = 0x00000001 +}; +#endif /* __iop_fifo_out_extra_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_mpu_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_mpu_defs.h new file mode 100644 index 000000000000..c2b0ba1be60f --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_mpu_defs.h @@ -0,0 +1,190 @@ +#ifndef __iop_mpu_defs_h +#define __iop_mpu_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_mpu.r + * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_mpu_defs.h ../../inst/io_proc/rtl/iop_mpu.r + * id: $Id: iop_mpu_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_mpu */ + +#define STRIDE_iop_mpu_rw_r 4 +/* Register rw_r, scope iop_mpu, type rw */ +typedef unsigned int reg_iop_mpu_rw_r; +#define REG_RD_ADDR_iop_mpu_rw_r 0 +#define REG_WR_ADDR_iop_mpu_rw_r 0 + +/* Register rw_ctrl, scope iop_mpu, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int dummy1 : 31; +} reg_iop_mpu_rw_ctrl; +#define REG_RD_ADDR_iop_mpu_rw_ctrl 128 +#define REG_WR_ADDR_iop_mpu_rw_ctrl 128 + +/* Register r_pc, scope iop_mpu, type r */ +typedef struct { + unsigned int addr : 12; + unsigned int dummy1 : 20; +} reg_iop_mpu_r_pc; +#define REG_RD_ADDR_iop_mpu_r_pc 132 + +/* Register r_stat, scope iop_mpu, type r */ +typedef struct { + unsigned int instr_reg_busy : 1; + unsigned int intr_busy : 1; + unsigned int intr_vect : 16; + unsigned int dummy1 : 14; +} reg_iop_mpu_r_stat; +#define REG_RD_ADDR_iop_mpu_r_stat 136 + +/* Register rw_instr, scope iop_mpu, type rw */ +typedef unsigned int reg_iop_mpu_rw_instr; +#define REG_RD_ADDR_iop_mpu_rw_instr 140 +#define REG_WR_ADDR_iop_mpu_rw_instr 140 + +/* Register rw_immediate, scope iop_mpu, type rw */ +typedef unsigned int reg_iop_mpu_rw_immediate; +#define REG_RD_ADDR_iop_mpu_rw_immediate 144 +#define REG_WR_ADDR_iop_mpu_rw_immediate 144 + +/* Register r_trace, scope iop_mpu, type r */ +typedef struct { + unsigned int intr_vect : 16; + unsigned int pc : 12; + unsigned int en : 1; + unsigned int instr_reg_busy : 1; + unsigned int intr_busy : 1; + unsigned int dummy1 : 1; +} reg_iop_mpu_r_trace; +#define REG_RD_ADDR_iop_mpu_r_trace 148 + +/* Register r_wr_stat, scope iop_mpu, type r */ +typedef struct { + unsigned int r0 : 1; + unsigned int r1 : 1; + unsigned int r2 : 1; + unsigned int r3 : 1; + unsigned int r4 : 1; + unsigned int r5 : 1; + unsigned int r6 : 1; + unsigned int r7 : 1; + unsigned int r8 : 1; + unsigned int r9 : 1; + unsigned int r10 : 1; + unsigned int r11 : 1; + unsigned int r12 : 1; + unsigned int r13 : 1; + unsigned int r14 : 1; + unsigned int r15 : 1; + unsigned int dummy1 : 16; +} reg_iop_mpu_r_wr_stat; +#define REG_RD_ADDR_iop_mpu_r_wr_stat 152 + +#define STRIDE_iop_mpu_rw_thread 4 +/* Register rw_thread, scope iop_mpu, type rw */ +typedef struct { + unsigned int addr : 12; + unsigned int dummy1 : 20; +} reg_iop_mpu_rw_thread; +#define REG_RD_ADDR_iop_mpu_rw_thread 156 +#define REG_WR_ADDR_iop_mpu_rw_thread 156 + +#define STRIDE_iop_mpu_rw_intr 4 +/* Register rw_intr, scope iop_mpu, type rw */ +typedef struct { + unsigned int addr : 12; + unsigned int dummy1 : 20; +} reg_iop_mpu_rw_intr; +#define REG_RD_ADDR_iop_mpu_rw_intr 196 +#define REG_WR_ADDR_iop_mpu_rw_intr 196 + + +/* Constants */ +enum { + regk_iop_mpu_no = 0x00000000, + regk_iop_mpu_r_pc_default = 0x00000000, + regk_iop_mpu_rw_ctrl_default = 0x00000000, + regk_iop_mpu_rw_intr_size = 0x00000010, + regk_iop_mpu_rw_r_size = 0x00000010, + regk_iop_mpu_rw_thread_default = 0x00000000, + regk_iop_mpu_rw_thread_size = 0x00000004, + regk_iop_mpu_yes = 0x00000001 +}; +#endif /* __iop_mpu_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_mpu_macros.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_mpu_macros.h new file mode 100644 index 000000000000..2ec897ced166 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_mpu_macros.h @@ -0,0 +1,764 @@ +/* ************************************************************************* */ +/* This file is autogenerated by IOPASM Version 1.2 */ +/* DO NOT EDIT THIS FILE - All changes will be lost! */ +/* ************************************************************************* */ + + + +#ifndef __IOP_MPU_MACROS_H__ +#define __IOP_MPU_MACROS_H__ + + +/* ************************************************************************* */ +/* REGISTER DEFINITIONS */ +/* ************************************************************************* */ +#define MPU_R0 (0x0) +#define MPU_R1 (0x1) +#define MPU_R2 (0x2) +#define MPU_R3 (0x3) +#define MPU_R4 (0x4) +#define MPU_R5 (0x5) +#define MPU_R6 (0x6) +#define MPU_R7 (0x7) +#define MPU_R8 (0x8) +#define MPU_R9 (0x9) +#define MPU_R10 (0xa) +#define MPU_R11 (0xb) +#define MPU_R12 (0xc) +#define MPU_R13 (0xd) +#define MPU_R14 (0xe) +#define MPU_R15 (0xf) +#define MPU_PC (0x2) +#define MPU_WSTS (0x3) +#define MPU_JADDR (0x4) +#define MPU_IRP (0x5) +#define MPU_SRP (0x6) +#define MPU_T0 (0x8) +#define MPU_T1 (0x9) +#define MPU_T2 (0xa) +#define MPU_T3 (0xb) +#define MPU_I0 (0x10) +#define MPU_I1 (0x11) +#define MPU_I2 (0x12) +#define MPU_I3 (0x13) +#define MPU_I4 (0x14) +#define MPU_I5 (0x15) +#define MPU_I6 (0x16) +#define MPU_I7 (0x17) +#define MPU_I8 (0x18) +#define MPU_I9 (0x19) +#define MPU_I10 (0x1a) +#define MPU_I11 (0x1b) +#define MPU_I12 (0x1c) +#define MPU_I13 (0x1d) +#define MPU_I14 (0x1e) +#define MPU_I15 (0x1f) +#define MPU_P2 (0x2) +#define MPU_P3 (0x3) +#define MPU_P5 (0x5) +#define MPU_P6 (0x6) +#define MPU_P8 (0x8) +#define MPU_P9 (0x9) +#define MPU_P10 (0xa) +#define MPU_P11 (0xb) +#define MPU_P16 (0x10) +#define MPU_P17 (0x12) +#define MPU_P18 (0x12) +#define MPU_P19 (0x13) +#define MPU_P20 (0x14) +#define MPU_P21 (0x15) +#define MPU_P22 (0x16) +#define MPU_P23 (0x17) +#define MPU_P24 (0x18) +#define MPU_P25 (0x19) +#define MPU_P26 (0x1a) +#define MPU_P27 (0x1b) +#define MPU_P28 (0x1c) +#define MPU_P29 (0x1d) +#define MPU_P30 (0x1e) +#define MPU_P31 (0x1f) +#define MPU_P1 (0x1) +#define MPU_REGA (0x1) + + + +/* ************************************************************************* */ +/* ADDRESS MACROS */ +/* ************************************************************************* */ +#define MK_DWORD_ADDR(ADDR) (ADDR >> 2) +#define MK_BYTE_ADDR(ADDR) (ADDR) + + + +/* ************************************************************************* */ +/* INSTRUCTION MACROS */ +/* ************************************************************************* */ +#define MPU_ADD_RRR(S,N,D) (0x4000008C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADD_RRS(S,N,D) (0x4000048C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADD_RSR(S,N,D) (0x4000018C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADD_RSS(S,N,D) (0x4000058C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADD_SRR(S,N,D) (0x4000028C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADD_SRS(S,N,D) (0x4000068C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADD_SSR(S,N,D) (0x4000038C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADD_SSS(S,N,D) (0x4000078C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDQ_RIR(S,N,D) (0x10000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDQ_IRR(S,N,D) (0x10000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDX_IRR_INSTR(S,N,D) (0xC000008C | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ADDX_RIR_INSTR(S,N,D) (0xC000008C | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_ADDX_ISR_INSTR(S,N,D) (0xC000028C | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ADDX_SIR_INSTR(S,N,D) (0xC000028C | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_ADDX_IRS_INSTR(S,N,D) (0xC000048C | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ADDX_RIS_INSTR(S,N,D) (0xC000048C | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_ADDX_ISS_INSTR(S,N,D) (0xC000068C | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ADDX_SIS_INSTR(S,N,D) (0xC000068C | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ADDX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_AND_RRR(S,N,D) (0x4000008A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_AND_RRS(S,N,D) (0x4000048A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_AND_RSR(S,N,D) (0x4000018A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_AND_RSS(S,N,D) (0x4000058A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_AND_SRR(S,N,D) (0x4000028A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_AND_SRS(S,N,D) (0x4000068A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_AND_SSR(S,N,D) (0x4000038A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_AND_SSS(S,N,D) (0x4000078A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDQ_RIR(S,N,D) (0x08000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDQ_IRR(S,N,D) (0x08000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDX_RIR_INSTR(S,N,D) (0xC000008A | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_ANDX_IRR_INSTR(S,N,D) (0xC000008A | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ANDX_ISR_INSTR(S,N,D) (0xC000028A | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ANDX_SIR_INSTR(S,N,D) (0xC000028A | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_ANDX_IRS_INSTR(S,N,D) (0xC000048A | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ANDX_ISS_INSTR(S,N,D) (0xC000068A | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ANDX_RIS_INSTR(S,N,D) (0xC000048A | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_ANDX_SIS_INSTR(S,N,D) (0xC000068A | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ANDX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_BA_I(S) (0x60000000 | ((S & ((1 << 16) - 1)) << 0)) + +#define MPU_BAR_R(S) (0x62000000 | ((S & ((1 << 5) - 1)) << 11)) + +#define MPU_BAR_S(S) (0x63000000 | ((S & ((1 << 5) - 1)) << 11)) + +#define MPU_BBC_RII(S,N,D) (0x78000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 21)\ + | ((D & ((1 << 16) - 1)) << 0)) + +#define MPU_BBS_RII(S,N,D) (0x7C000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 21)\ + | ((D & ((1 << 16) - 1)) << 0)) + +#define MPU_BNZ_RI(S,D) (0x74400000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) + +#define MPU_BMI_RI(S,D) (0x7FE00000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) + +#define MPU_BPL_RI(S,D) (0x7BE00000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) + +#define MPU_BZ_RI(S,D) (0x74000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) + +#define MPU_DI() (0x40000001) + +#define MPU_EI() (0x40000003) + +#define MPU_HALT() (0x40000002) + +#define MPU_JIR_I(S) (0x60200000 | ((S & ((1 << 16) - 1)) << 0)) + +#define MPU_JIR_R(S) (0x62200000 | ((S & ((1 << 5) - 1)) << 11)) + +#define MPU_JIR_S(S) (0x63200000 | ((S & ((1 << 5) - 1)) << 11)) + +#define MPU_JNT() (0x61000000) + +#define MPU_JSR_I(S) (0x60400000 | ((S & ((1 << 16) - 1)) << 0)) + +#define MPU_JSR_R(S) (0x62400000 | ((S & ((1 << 5) - 1)) << 11)) + +#define MPU_JSR_S(S) (0x63400000 | ((S & ((1 << 5) - 1)) << 11)) + +#define MPU_LSL_RRR(S,N,D) (0x4000008E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSL_RRS(S,N,D) (0x4000048E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSL_RSR(S,N,D) (0x4000018E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSL_RSS(S,N,D) (0x4000058E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSL_SRR(S,N,D) (0x4000028E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSL_SRS(S,N,D) (0x4000068E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSL_SSR(S,N,D) (0x4000038E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSL_SSS(S,N,D) (0x4000078E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSLQ_RIR(S,N,D) (0x18000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSR_RRR(S,N,D) (0x4000008F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSR_RRS(S,N,D) (0x4000048F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSR_RSR(S,N,D) (0x4000018F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSR_RSS(S,N,D) (0x4000058F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSR_SRR(S,N,D) (0x4000028F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSR_SRS(S,N,D) (0x4000068F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSR_SSR(S,N,D) (0x4000038F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSR_SSS(S,N,D) (0x4000078F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LSRQ_RIR(S,N,D) (0x1C000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_LW_IR(S,D) (0x64400000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_LW_IS(S,D) (0x64600000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_LW_RR(S,D) (0x66400000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_LW_RS(S,D) (0x66600000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_LW_SR(S,D) (0x67400000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_LW_SS(S,D) (0x67600000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_LW_RIR(S,N,D) (0x66400000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_LW_RIS(S,N,D) (0x66600000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_LW_SIR(S,N,D) (0x67400000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_LW_SIS(S,N,D) (0x67600000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_MOVE_RR(S,D) (0x40000081 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_MOVE_RS(S,D) (0x40000481 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_MOVE_SR(S,D) (0x40000181 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_MOVE_SS(S,D) (0x40000581 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_MOVEQ_IR(S,D) (0x24000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_MOVEQ_IS(S,D) (0x2C000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_MOVEX_IR_INSTR(S,D) (0xC0000081 | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_MOVEX_IR_IMM(S,D) (S & 0xFFFFFFFF) + +#define MPU_MOVEX_IS_INSTR(S,D) (0xC0000481 | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_MOVEX_IS_IMM(S,D) (S & 0xFFFFFFFF) + +#define MPU_NOP() (0x40000000) + +#define MPU_NOT_RR(S,D) (0x40100081 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_NOT_RS(S,D) (0x40100481 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_NOT_SR(S,D) (0x40100181 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_NOT_SS(S,D) (0x40100581 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_OR_RRR(S,N,D) (0x4000008B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_OR_RRS(S,N,D) (0x4000048B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_OR_RSR(S,N,D) (0x4000018B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_OR_RSS(S,N,D) (0x4000058B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_OR_SRR(S,N,D) (0x4000028B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_OR_SRS(S,N,D) (0x4000068B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_OR_SSR(S,N,D) (0x4000038B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_OR_SSS(S,N,D) (0x4000078B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORQ_RIR(S,N,D) (0x0C000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORQ_IRR(S,N,D) (0x0C000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORX_RIR_INSTR(S,N,D) (0xC000008B | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_ORX_IRR_INSTR(S,N,D) (0xC000008B | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ORX_SIR_INSTR(S,N,D) (0xC000028B | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_ORX_ISR_INSTR(S,N,D) (0xC000028B | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ORX_RIS_INSTR(S,N,D) (0xC000048B | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_ORX_IRS_INSTR(S,N,D) (0xC000048B | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_ORX_SIS_INSTR(S,N,D) (0xC000068B | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_ORX_ISS_INSTR(S,N,D) (0xC000068B | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_ORX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_RET() (0x63003000) + +#define MPU_RETI() (0x63602800) + +#define MPU_RR_IR(S,D) (0x50000000 | ((S & ((1 << 11) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_RR_SR(S,D) (0x50008000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_RW_RI(S,D) (0x56000000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 11) - 1)) << 0)) + +#define MPU_RW_RS(S,D) (0x57000000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_RWQ_II(S,D) (0x58000000 | ((S & ((1 << 16) - 1)) << 11)\ + | ((D & ((1 << 11) - 1)) << 0)) + +#define MPU_RWQ_IS(S,D) (0x55000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_RWX_II_INSTR(S,D) (0xD4000000 | ((D & ((1 << 11) - 1)) << 0)) + +#define MPU_RWX_II_IMM(S,D) (S & 0xFFFFFFFF) + +#define MPU_RWX_IS_INSTR(S,D) (0xD5000000 | ((D & ((1 << 5) - 1)) << 16)) + +#define MPU_RWX_IS_IMM(S,D) (S & 0xFFFFFFFF) + +#define MPU_SUB_RRR(S,N,D) (0x4000008D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUB_RRS(S,N,D) (0x4000048D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUB_RSR(S,N,D) (0x4000018D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUB_RSS(S,N,D) (0x4000058D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUB_SRR(S,N,D) (0x4000028D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUB_SRS(S,N,D) (0x4000068D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUB_SSR(S,N,D) (0x4000038D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUB_SSS(S,N,D) (0x4000078D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUBQ_RIR(S,N,D) (0x14000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUBX_RIR_INSTR(S,N,D) (0xC000008D | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUBX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_SUBX_SIR_INSTR(S,N,D) (0xC000028D | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUBX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_SUBX_RIS_INSTR(S,N,D) (0xC000048D | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUBX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_SUBX_SIS_INSTR(S,N,D) (0xC000068D | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_SUBX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_SW_RI(S,D) (0x64000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) + +#define MPU_SW_SI(S,D) (0x64200000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) + +#define MPU_SW_RR(S,D) (0x66000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SW_SR(S,D) (0x66200000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SW_RS(S,D) (0x67000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SW_SS(S,D) (0x67200000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SW_RIR(S,N,D) (0x66000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SW_SIR(S,N,D) (0x66200000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SW_RIS(S,N,D) (0x67000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SW_SIS(S,N,D) (0x67200000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SWX_II_INSTR(S,D) (0xE4000000 | ((D & ((1 << 16) - 1)) << 0)) + +#define MPU_SWX_II_IMM(S,D) (S & 0xFFFFFFFF) + +#define MPU_SWX_IR_INSTR(S,D) (0xE6000000 | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SWX_IR_IMM(S,D) (S & 0xFFFFFFFF) + +#define MPU_SWX_IS_INSTR(S,D) (0xE7000000 | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SWX_IS_IMM(S,D) (S & 0xFFFFFFFF) + +#define MPU_SWX_IIR_INSTR(S,N,D) (0xE6000000 | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SWX_IIR_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_SWX_IIS_INSTR(S,N,D) (0xE7000000 | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) + +#define MPU_SWX_IIS_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_XOR_RRR(S,N,D) (0x40000089 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_RRS(S,N,D) (0x40000489 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_RSR(S,N,D) (0x40000189 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_RSS(S,N,D) (0x40000589 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_SRR(S,N,D) (0x40000289 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_SRS(S,N,D) (0x40000689 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_SSR(S,N,D) (0x40000389 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_SSS(S,N,D) (0x40000789 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_RR(S,D) (0x40000088 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_RS(S,D) (0x40000488 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_SR(S,D) (0x40000188 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XOR_SS(S,D) (0x40000588 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORQ_RIR(S,N,D) (0x04000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORQ_IRR(S,N,D) (0x04000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORX_RIR_INSTR(S,N,D) (0xC0000089 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_XORX_IRR_INSTR(S,N,D) (0xC0000089 | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_XORX_SIR_INSTR(S,N,D) (0xC0000289 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_XORX_ISR_INSTR(S,N,D) (0xC0000289 | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_XORX_RIS_INSTR(S,N,D) (0xC0000489 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_XORX_IRS_INSTR(S,N,D) (0xC0000489 | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) + +#define MPU_XORX_SIS_INSTR(S,N,D) (0xC0000689 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) + +#define MPU_XORX_ISS_INSTR(S,N,D) (0xC0000689 | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) + +#define MPU_XORX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) + + +#endif /* end of __IOP_MPU_MACROS_H__ */ +/* End of iop_mpu_macros.h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_reg_space.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_reg_space.h new file mode 100644 index 000000000000..756550f5d6cb --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_reg_space.h @@ -0,0 +1,44 @@ +/* Autogenerated Changes here will be lost! + * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg + */ +#define regi_iop_version (regi_iop + 0) +#define regi_iop_fifo_in0_extra (regi_iop + 64) +#define regi_iop_fifo_in1_extra (regi_iop + 128) +#define regi_iop_fifo_out0_extra (regi_iop + 192) +#define regi_iop_fifo_out1_extra (regi_iop + 256) +#define regi_iop_trigger_grp0 (regi_iop + 320) +#define regi_iop_trigger_grp1 (regi_iop + 384) +#define regi_iop_trigger_grp2 (regi_iop + 448) +#define regi_iop_trigger_grp3 (regi_iop + 512) +#define regi_iop_trigger_grp4 (regi_iop + 576) +#define regi_iop_trigger_grp5 (regi_iop + 640) +#define regi_iop_trigger_grp6 (regi_iop + 704) +#define regi_iop_trigger_grp7 (regi_iop + 768) +#define regi_iop_crc_par0 (regi_iop + 896) +#define regi_iop_crc_par1 (regi_iop + 1024) +#define regi_iop_dmc_in0 (regi_iop + 1152) +#define regi_iop_dmc_in1 (regi_iop + 1280) +#define regi_iop_dmc_out0 (regi_iop + 1408) +#define regi_iop_dmc_out1 (regi_iop + 1536) +#define regi_iop_fifo_in0 (regi_iop + 1664) +#define regi_iop_fifo_in1 (regi_iop + 1792) +#define regi_iop_fifo_out0 (regi_iop + 1920) +#define regi_iop_fifo_out1 (regi_iop + 2048) +#define regi_iop_scrc_in0 (regi_iop + 2176) +#define regi_iop_scrc_in1 (regi_iop + 2304) +#define regi_iop_scrc_out0 (regi_iop + 2432) +#define regi_iop_scrc_out1 (regi_iop + 2560) +#define regi_iop_timer_grp0 (regi_iop + 2688) +#define regi_iop_timer_grp1 (regi_iop + 2816) +#define regi_iop_timer_grp2 (regi_iop + 2944) +#define regi_iop_timer_grp3 (regi_iop + 3072) +#define regi_iop_sap_in (regi_iop + 3328) +#define regi_iop_sap_out (regi_iop + 3584) +#define regi_iop_spu0 (regi_iop + 3840) +#define regi_iop_spu1 (regi_iop + 4096) +#define regi_iop_sw_cfg (regi_iop + 4352) +#define regi_iop_sw_cpu (regi_iop + 4608) +#define regi_iop_sw_mpu (regi_iop + 4864) +#define regi_iop_sw_spu0 (regi_iop + 5120) +#define regi_iop_sw_spu1 (regi_iop + 5376) +#define regi_iop_mpu (regi_iop + 5632) diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sap_in_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sap_in_defs.h new file mode 100644 index 000000000000..5548ac10074f --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sap_in_defs.h @@ -0,0 +1,179 @@ +#ifndef __iop_sap_in_defs_h +#define __iop_sap_in_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_sap_in.r + * id: + * last modfied: Mon Apr 11 16:08:45 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sap_in_defs.h ../../inst/io_proc/rtl/iop_sap_in.r + * id: $Id: iop_sap_in_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sap_in */ + +/* Register rw_bus0_sync, scope iop_sap_in, type rw */ +typedef struct { + unsigned int byte0_sel : 2; + unsigned int byte0_ext_src : 3; + unsigned int byte0_edge : 2; + unsigned int byte0_delay : 1; + unsigned int byte1_sel : 2; + unsigned int byte1_ext_src : 3; + unsigned int byte1_edge : 2; + unsigned int byte1_delay : 1; + unsigned int byte2_sel : 2; + unsigned int byte2_ext_src : 3; + unsigned int byte2_edge : 2; + unsigned int byte2_delay : 1; + unsigned int byte3_sel : 2; + unsigned int byte3_ext_src : 3; + unsigned int byte3_edge : 2; + unsigned int byte3_delay : 1; +} reg_iop_sap_in_rw_bus0_sync; +#define REG_RD_ADDR_iop_sap_in_rw_bus0_sync 0 +#define REG_WR_ADDR_iop_sap_in_rw_bus0_sync 0 + +/* Register rw_bus1_sync, scope iop_sap_in, type rw */ +typedef struct { + unsigned int byte0_sel : 2; + unsigned int byte0_ext_src : 3; + unsigned int byte0_edge : 2; + unsigned int byte0_delay : 1; + unsigned int byte1_sel : 2; + unsigned int byte1_ext_src : 3; + unsigned int byte1_edge : 2; + unsigned int byte1_delay : 1; + unsigned int byte2_sel : 2; + unsigned int byte2_ext_src : 3; + unsigned int byte2_edge : 2; + unsigned int byte2_delay : 1; + unsigned int byte3_sel : 2; + unsigned int byte3_ext_src : 3; + unsigned int byte3_edge : 2; + unsigned int byte3_delay : 1; +} reg_iop_sap_in_rw_bus1_sync; +#define REG_RD_ADDR_iop_sap_in_rw_bus1_sync 4 +#define REG_WR_ADDR_iop_sap_in_rw_bus1_sync 4 + +#define STRIDE_iop_sap_in_rw_gio 4 +/* Register rw_gio, scope iop_sap_in, type rw */ +typedef struct { + unsigned int sync_sel : 2; + unsigned int sync_ext_src : 3; + unsigned int sync_edge : 2; + unsigned int delay : 1; + unsigned int logic : 2; + unsigned int dummy1 : 22; +} reg_iop_sap_in_rw_gio; +#define REG_RD_ADDR_iop_sap_in_rw_gio 8 +#define REG_WR_ADDR_iop_sap_in_rw_gio 8 + + +/* Constants */ +enum { + regk_iop_sap_in_and = 0x00000002, + regk_iop_sap_in_ext_clk200 = 0x00000003, + regk_iop_sap_in_gio1 = 0x00000000, + regk_iop_sap_in_gio13 = 0x00000005, + regk_iop_sap_in_gio18 = 0x00000003, + regk_iop_sap_in_gio19 = 0x00000004, + regk_iop_sap_in_gio21 = 0x00000006, + regk_iop_sap_in_gio23 = 0x00000005, + regk_iop_sap_in_gio29 = 0x00000007, + regk_iop_sap_in_gio5 = 0x00000004, + regk_iop_sap_in_gio6 = 0x00000001, + regk_iop_sap_in_gio7 = 0x00000002, + regk_iop_sap_in_inv = 0x00000001, + regk_iop_sap_in_neg = 0x00000002, + regk_iop_sap_in_no = 0x00000000, + regk_iop_sap_in_no_del_ext_clk200 = 0x00000001, + regk_iop_sap_in_none = 0x00000000, + regk_iop_sap_in_or = 0x00000003, + regk_iop_sap_in_pos = 0x00000001, + regk_iop_sap_in_pos_neg = 0x00000003, + regk_iop_sap_in_rw_bus0_sync_default = 0x02020202, + regk_iop_sap_in_rw_bus1_sync_default = 0x02020202, + regk_iop_sap_in_rw_gio_default = 0x00000002, + regk_iop_sap_in_rw_gio_size = 0x00000020, + regk_iop_sap_in_timer_grp0_tmr3 = 0x00000006, + regk_iop_sap_in_timer_grp1_tmr3 = 0x00000004, + regk_iop_sap_in_timer_grp2_tmr3 = 0x00000005, + regk_iop_sap_in_timer_grp3_tmr3 = 0x00000007, + regk_iop_sap_in_tmr_clk200 = 0x00000000, + regk_iop_sap_in_two_clk200 = 0x00000002, + regk_iop_sap_in_yes = 0x00000001 +}; +#endif /* __iop_sap_in_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sap_out_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sap_out_defs.h new file mode 100644 index 000000000000..273936996183 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sap_out_defs.h @@ -0,0 +1,306 @@ +#ifndef __iop_sap_out_defs_h +#define __iop_sap_out_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_sap_out.r + * id: + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sap_out_defs.h ../../inst/io_proc/rtl/iop_sap_out.r + * id: $Id: iop_sap_out_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sap_out */ + +/* Register rw_gen_gated, scope iop_sap_out, type rw */ +typedef struct { + unsigned int clk0_src : 2; + unsigned int clk0_gate_src : 2; + unsigned int clk0_force_src : 3; + unsigned int clk1_src : 2; + unsigned int clk1_gate_src : 2; + unsigned int clk1_force_src : 3; + unsigned int clk2_src : 2; + unsigned int clk2_gate_src : 2; + unsigned int clk2_force_src : 3; + unsigned int clk3_src : 2; + unsigned int clk3_gate_src : 2; + unsigned int clk3_force_src : 3; + unsigned int dummy1 : 4; +} reg_iop_sap_out_rw_gen_gated; +#define REG_RD_ADDR_iop_sap_out_rw_gen_gated 0 +#define REG_WR_ADDR_iop_sap_out_rw_gen_gated 0 + +/* Register rw_bus0, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte0_clk_sel : 3; + unsigned int byte0_gated_clk : 2; + unsigned int byte0_clk_inv : 1; + unsigned int byte1_clk_sel : 3; + unsigned int byte1_gated_clk : 2; + unsigned int byte1_clk_inv : 1; + unsigned int byte2_clk_sel : 3; + unsigned int byte2_gated_clk : 2; + unsigned int byte2_clk_inv : 1; + unsigned int byte3_clk_sel : 3; + unsigned int byte3_gated_clk : 2; + unsigned int byte3_clk_inv : 1; + unsigned int dummy1 : 8; +} reg_iop_sap_out_rw_bus0; +#define REG_RD_ADDR_iop_sap_out_rw_bus0 4 +#define REG_WR_ADDR_iop_sap_out_rw_bus0 4 + +/* Register rw_bus1, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte0_clk_sel : 3; + unsigned int byte0_gated_clk : 2; + unsigned int byte0_clk_inv : 1; + unsigned int byte1_clk_sel : 3; + unsigned int byte1_gated_clk : 2; + unsigned int byte1_clk_inv : 1; + unsigned int byte2_clk_sel : 3; + unsigned int byte2_gated_clk : 2; + unsigned int byte2_clk_inv : 1; + unsigned int byte3_clk_sel : 3; + unsigned int byte3_gated_clk : 2; + unsigned int byte3_clk_inv : 1; + unsigned int dummy1 : 8; +} reg_iop_sap_out_rw_bus1; +#define REG_RD_ADDR_iop_sap_out_rw_bus1 8 +#define REG_WR_ADDR_iop_sap_out_rw_bus1 8 + +/* Register rw_bus0_lo_oe, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte0_clk_sel : 3; + unsigned int byte0_clk_ext : 3; + unsigned int byte0_gated_clk : 2; + unsigned int byte0_clk_inv : 1; + unsigned int byte0_logic : 2; + unsigned int byte1_clk_sel : 3; + unsigned int byte1_clk_ext : 3; + unsigned int byte1_gated_clk : 2; + unsigned int byte1_clk_inv : 1; + unsigned int byte1_logic : 2; + unsigned int dummy1 : 10; +} reg_iop_sap_out_rw_bus0_lo_oe; +#define REG_RD_ADDR_iop_sap_out_rw_bus0_lo_oe 12 +#define REG_WR_ADDR_iop_sap_out_rw_bus0_lo_oe 12 + +/* Register rw_bus0_hi_oe, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte2_clk_sel : 3; + unsigned int byte2_clk_ext : 3; + unsigned int byte2_gated_clk : 2; + unsigned int byte2_clk_inv : 1; + unsigned int byte2_logic : 2; + unsigned int byte3_clk_sel : 3; + unsigned int byte3_clk_ext : 3; + unsigned int byte3_gated_clk : 2; + unsigned int byte3_clk_inv : 1; + unsigned int byte3_logic : 2; + unsigned int dummy1 : 10; +} reg_iop_sap_out_rw_bus0_hi_oe; +#define REG_RD_ADDR_iop_sap_out_rw_bus0_hi_oe 16 +#define REG_WR_ADDR_iop_sap_out_rw_bus0_hi_oe 16 + +/* Register rw_bus1_lo_oe, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte0_clk_sel : 3; + unsigned int byte0_clk_ext : 3; + unsigned int byte0_gated_clk : 2; + unsigned int byte0_clk_inv : 1; + unsigned int byte0_logic : 2; + unsigned int byte1_clk_sel : 3; + unsigned int byte1_clk_ext : 3; + unsigned int byte1_gated_clk : 2; + unsigned int byte1_clk_inv : 1; + unsigned int byte1_logic : 2; + unsigned int dummy1 : 10; +} reg_iop_sap_out_rw_bus1_lo_oe; +#define REG_RD_ADDR_iop_sap_out_rw_bus1_lo_oe 20 +#define REG_WR_ADDR_iop_sap_out_rw_bus1_lo_oe 20 + +/* Register rw_bus1_hi_oe, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte2_clk_sel : 3; + unsigned int byte2_clk_ext : 3; + unsigned int byte2_gated_clk : 2; + unsigned int byte2_clk_inv : 1; + unsigned int byte2_logic : 2; + unsigned int byte3_clk_sel : 3; + unsigned int byte3_clk_ext : 3; + unsigned int byte3_gated_clk : 2; + unsigned int byte3_clk_inv : 1; + unsigned int byte3_logic : 2; + unsigned int dummy1 : 10; +} reg_iop_sap_out_rw_bus1_hi_oe; +#define REG_RD_ADDR_iop_sap_out_rw_bus1_hi_oe 24 +#define REG_WR_ADDR_iop_sap_out_rw_bus1_hi_oe 24 + +#define STRIDE_iop_sap_out_rw_gio 4 +/* Register rw_gio, scope iop_sap_out, type rw */ +typedef struct { + unsigned int out_clk_sel : 3; + unsigned int out_clk_ext : 4; + unsigned int out_gated_clk : 2; + unsigned int out_clk_inv : 1; + unsigned int out_logic : 1; + unsigned int oe_clk_sel : 3; + unsigned int oe_clk_ext : 3; + unsigned int oe_gated_clk : 2; + unsigned int oe_clk_inv : 1; + unsigned int oe_logic : 2; + unsigned int dummy1 : 10; +} reg_iop_sap_out_rw_gio; +#define REG_RD_ADDR_iop_sap_out_rw_gio 28 +#define REG_WR_ADDR_iop_sap_out_rw_gio 28 + + +/* Constants */ +enum { + regk_iop_sap_out_and = 0x00000002, + regk_iop_sap_out_clk0 = 0x00000000, + regk_iop_sap_out_clk1 = 0x00000001, + regk_iop_sap_out_clk12 = 0x00000002, + regk_iop_sap_out_clk2 = 0x00000002, + regk_iop_sap_out_clk200 = 0x00000001, + regk_iop_sap_out_clk3 = 0x00000003, + regk_iop_sap_out_ext = 0x00000003, + regk_iop_sap_out_gated = 0x00000004, + regk_iop_sap_out_gio1 = 0x00000000, + regk_iop_sap_out_gio13 = 0x00000002, + regk_iop_sap_out_gio13_clk = 0x0000000c, + regk_iop_sap_out_gio15 = 0x00000001, + regk_iop_sap_out_gio18 = 0x00000003, + regk_iop_sap_out_gio18_clk = 0x0000000d, + regk_iop_sap_out_gio1_clk = 0x00000008, + regk_iop_sap_out_gio21_clk = 0x0000000e, + regk_iop_sap_out_gio23 = 0x00000002, + regk_iop_sap_out_gio29_clk = 0x0000000f, + regk_iop_sap_out_gio31 = 0x00000003, + regk_iop_sap_out_gio5 = 0x00000001, + regk_iop_sap_out_gio5_clk = 0x00000009, + regk_iop_sap_out_gio6_clk = 0x0000000a, + regk_iop_sap_out_gio7 = 0x00000000, + regk_iop_sap_out_gio7_clk = 0x0000000b, + regk_iop_sap_out_gio_in13 = 0x00000001, + regk_iop_sap_out_gio_in21 = 0x00000002, + regk_iop_sap_out_gio_in29 = 0x00000003, + regk_iop_sap_out_gio_in5 = 0x00000000, + regk_iop_sap_out_inv = 0x00000001, + regk_iop_sap_out_nand = 0x00000003, + regk_iop_sap_out_no = 0x00000000, + regk_iop_sap_out_none = 0x00000000, + regk_iop_sap_out_rw_bus0_default = 0x00000000, + regk_iop_sap_out_rw_bus0_hi_oe_default = 0x00000000, + regk_iop_sap_out_rw_bus0_lo_oe_default = 0x00000000, + regk_iop_sap_out_rw_bus1_default = 0x00000000, + regk_iop_sap_out_rw_bus1_hi_oe_default = 0x00000000, + regk_iop_sap_out_rw_bus1_lo_oe_default = 0x00000000, + regk_iop_sap_out_rw_gen_gated_default = 0x00000000, + regk_iop_sap_out_rw_gio_default = 0x00000000, + regk_iop_sap_out_rw_gio_size = 0x00000020, + regk_iop_sap_out_spu0_gio0 = 0x00000002, + regk_iop_sap_out_spu0_gio1 = 0x00000003, + regk_iop_sap_out_spu0_gio12 = 0x00000004, + regk_iop_sap_out_spu0_gio13 = 0x00000004, + regk_iop_sap_out_spu0_gio14 = 0x00000004, + regk_iop_sap_out_spu0_gio15 = 0x00000004, + regk_iop_sap_out_spu0_gio2 = 0x00000002, + regk_iop_sap_out_spu0_gio3 = 0x00000003, + regk_iop_sap_out_spu0_gio4 = 0x00000002, + regk_iop_sap_out_spu0_gio5 = 0x00000003, + regk_iop_sap_out_spu0_gio6 = 0x00000002, + regk_iop_sap_out_spu0_gio7 = 0x00000003, + regk_iop_sap_out_spu1_gio0 = 0x00000005, + regk_iop_sap_out_spu1_gio1 = 0x00000006, + regk_iop_sap_out_spu1_gio12 = 0x00000007, + regk_iop_sap_out_spu1_gio13 = 0x00000007, + regk_iop_sap_out_spu1_gio14 = 0x00000007, + regk_iop_sap_out_spu1_gio15 = 0x00000007, + regk_iop_sap_out_spu1_gio2 = 0x00000005, + regk_iop_sap_out_spu1_gio3 = 0x00000006, + regk_iop_sap_out_spu1_gio4 = 0x00000005, + regk_iop_sap_out_spu1_gio5 = 0x00000006, + regk_iop_sap_out_spu1_gio6 = 0x00000005, + regk_iop_sap_out_spu1_gio7 = 0x00000006, + regk_iop_sap_out_timer_grp0_tmr2 = 0x00000004, + regk_iop_sap_out_timer_grp1_tmr2 = 0x00000005, + regk_iop_sap_out_timer_grp2_tmr2 = 0x00000006, + regk_iop_sap_out_timer_grp3_tmr2 = 0x00000007, + regk_iop_sap_out_tmr = 0x00000005, + regk_iop_sap_out_yes = 0x00000001 +}; +#endif /* __iop_sap_out_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_scrc_in_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_scrc_in_defs.h new file mode 100644 index 000000000000..4f0a9a81e737 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_scrc_in_defs.h @@ -0,0 +1,160 @@ +#ifndef __iop_scrc_in_defs_h +#define __iop_scrc_in_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_scrc_in.r + * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_scrc_in_defs.h ../../inst/io_proc/rtl/iop_scrc_in.r + * id: $Id: iop_scrc_in_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_scrc_in */ + +/* Register rw_cfg, scope iop_scrc_in, type rw */ +typedef struct { + unsigned int trig : 2; + unsigned int dummy1 : 30; +} reg_iop_scrc_in_rw_cfg; +#define REG_RD_ADDR_iop_scrc_in_rw_cfg 0 +#define REG_WR_ADDR_iop_scrc_in_rw_cfg 0 + +/* Register rw_ctrl, scope iop_scrc_in, type rw */ +typedef struct { + unsigned int dif_in_en : 1; + unsigned int dummy1 : 31; +} reg_iop_scrc_in_rw_ctrl; +#define REG_RD_ADDR_iop_scrc_in_rw_ctrl 4 +#define REG_WR_ADDR_iop_scrc_in_rw_ctrl 4 + +/* Register r_stat, scope iop_scrc_in, type r */ +typedef struct { + unsigned int err : 1; + unsigned int dummy1 : 31; +} reg_iop_scrc_in_r_stat; +#define REG_RD_ADDR_iop_scrc_in_r_stat 8 + +/* Register rw_init_crc, scope iop_scrc_in, type rw */ +typedef unsigned int reg_iop_scrc_in_rw_init_crc; +#define REG_RD_ADDR_iop_scrc_in_rw_init_crc 12 +#define REG_WR_ADDR_iop_scrc_in_rw_init_crc 12 + +/* Register rs_computed_crc, scope iop_scrc_in, type rs */ +typedef unsigned int reg_iop_scrc_in_rs_computed_crc; +#define REG_RD_ADDR_iop_scrc_in_rs_computed_crc 16 + +/* Register r_computed_crc, scope iop_scrc_in, type r */ +typedef unsigned int reg_iop_scrc_in_r_computed_crc; +#define REG_RD_ADDR_iop_scrc_in_r_computed_crc 20 + +/* Register rw_crc, scope iop_scrc_in, type rw */ +typedef unsigned int reg_iop_scrc_in_rw_crc; +#define REG_RD_ADDR_iop_scrc_in_rw_crc 24 +#define REG_WR_ADDR_iop_scrc_in_rw_crc 24 + +/* Register rw_correct_crc, scope iop_scrc_in, type rw */ +typedef unsigned int reg_iop_scrc_in_rw_correct_crc; +#define REG_RD_ADDR_iop_scrc_in_rw_correct_crc 28 +#define REG_WR_ADDR_iop_scrc_in_rw_correct_crc 28 + +/* Register rw_wr1bit, scope iop_scrc_in, type rw */ +typedef struct { + unsigned int data : 2; + unsigned int last : 2; + unsigned int dummy1 : 28; +} reg_iop_scrc_in_rw_wr1bit; +#define REG_RD_ADDR_iop_scrc_in_rw_wr1bit 32 +#define REG_WR_ADDR_iop_scrc_in_rw_wr1bit 32 + + +/* Constants */ +enum { + regk_iop_scrc_in_dif_in = 0x00000002, + regk_iop_scrc_in_hi = 0x00000000, + regk_iop_scrc_in_neg = 0x00000002, + regk_iop_scrc_in_no = 0x00000000, + regk_iop_scrc_in_pos = 0x00000001, + regk_iop_scrc_in_pos_neg = 0x00000003, + regk_iop_scrc_in_r_computed_crc_default = 0x00000000, + regk_iop_scrc_in_rs_computed_crc_default = 0x00000000, + regk_iop_scrc_in_rw_cfg_default = 0x00000000, + regk_iop_scrc_in_rw_ctrl_default = 0x00000000, + regk_iop_scrc_in_rw_init_crc_default = 0x00000000, + regk_iop_scrc_in_set0 = 0x00000000, + regk_iop_scrc_in_set1 = 0x00000001, + regk_iop_scrc_in_yes = 0x00000001 +}; +#endif /* __iop_scrc_in_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_scrc_out_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_scrc_out_defs.h new file mode 100644 index 000000000000..fd1d6ea1d484 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_scrc_out_defs.h @@ -0,0 +1,146 @@ +#ifndef __iop_scrc_out_defs_h +#define __iop_scrc_out_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_scrc_out.r + * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_scrc_out_defs.h ../../inst/io_proc/rtl/iop_scrc_out.r + * id: $Id: iop_scrc_out_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_scrc_out */ + +/* Register rw_cfg, scope iop_scrc_out, type rw */ +typedef struct { + unsigned int trig : 2; + unsigned int inv_crc : 1; + unsigned int dummy1 : 29; +} reg_iop_scrc_out_rw_cfg; +#define REG_RD_ADDR_iop_scrc_out_rw_cfg 0 +#define REG_WR_ADDR_iop_scrc_out_rw_cfg 0 + +/* Register rw_ctrl, scope iop_scrc_out, type rw */ +typedef struct { + unsigned int strb_src : 1; + unsigned int out_src : 1; + unsigned int dummy1 : 30; +} reg_iop_scrc_out_rw_ctrl; +#define REG_RD_ADDR_iop_scrc_out_rw_ctrl 4 +#define REG_WR_ADDR_iop_scrc_out_rw_ctrl 4 + +/* Register rw_init_crc, scope iop_scrc_out, type rw */ +typedef unsigned int reg_iop_scrc_out_rw_init_crc; +#define REG_RD_ADDR_iop_scrc_out_rw_init_crc 8 +#define REG_WR_ADDR_iop_scrc_out_rw_init_crc 8 + +/* Register rw_crc, scope iop_scrc_out, type rw */ +typedef unsigned int reg_iop_scrc_out_rw_crc; +#define REG_RD_ADDR_iop_scrc_out_rw_crc 12 +#define REG_WR_ADDR_iop_scrc_out_rw_crc 12 + +/* Register rw_data, scope iop_scrc_out, type rw */ +typedef struct { + unsigned int val : 1; + unsigned int dummy1 : 31; +} reg_iop_scrc_out_rw_data; +#define REG_RD_ADDR_iop_scrc_out_rw_data 16 +#define REG_WR_ADDR_iop_scrc_out_rw_data 16 + +/* Register r_computed_crc, scope iop_scrc_out, type r */ +typedef unsigned int reg_iop_scrc_out_r_computed_crc; +#define REG_RD_ADDR_iop_scrc_out_r_computed_crc 20 + + +/* Constants */ +enum { + regk_iop_scrc_out_crc = 0x00000001, + regk_iop_scrc_out_data = 0x00000000, + regk_iop_scrc_out_dif = 0x00000001, + regk_iop_scrc_out_hi = 0x00000000, + regk_iop_scrc_out_neg = 0x00000002, + regk_iop_scrc_out_no = 0x00000000, + regk_iop_scrc_out_pos = 0x00000001, + regk_iop_scrc_out_pos_neg = 0x00000003, + regk_iop_scrc_out_reg = 0x00000000, + regk_iop_scrc_out_rw_cfg_default = 0x00000000, + regk_iop_scrc_out_rw_crc_default = 0x00000000, + regk_iop_scrc_out_rw_ctrl_default = 0x00000000, + regk_iop_scrc_out_rw_data_default = 0x00000000, + regk_iop_scrc_out_rw_init_crc_default = 0x00000000, + regk_iop_scrc_out_yes = 0x00000001 +}; +#endif /* __iop_scrc_out_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_spu_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_spu_defs.h new file mode 100644 index 000000000000..0fda26e2f06f --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_spu_defs.h @@ -0,0 +1,453 @@ +#ifndef __iop_spu_defs_h +#define __iop_spu_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_spu.r + * id: + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_spu_defs.h ../../inst/io_proc/rtl/iop_spu.r + * id: $Id: iop_spu_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_spu */ + +#define STRIDE_iop_spu_rw_r 4 +/* Register rw_r, scope iop_spu, type rw */ +typedef unsigned int reg_iop_spu_rw_r; +#define REG_RD_ADDR_iop_spu_rw_r 0 +#define REG_WR_ADDR_iop_spu_rw_r 0 + +/* Register rw_seq_pc, scope iop_spu, type rw */ +typedef struct { + unsigned int addr : 12; + unsigned int dummy1 : 20; +} reg_iop_spu_rw_seq_pc; +#define REG_RD_ADDR_iop_spu_rw_seq_pc 64 +#define REG_WR_ADDR_iop_spu_rw_seq_pc 64 + +/* Register rw_fsm_pc, scope iop_spu, type rw */ +typedef struct { + unsigned int addr : 12; + unsigned int dummy1 : 20; +} reg_iop_spu_rw_fsm_pc; +#define REG_RD_ADDR_iop_spu_rw_fsm_pc 68 +#define REG_WR_ADDR_iop_spu_rw_fsm_pc 68 + +/* Register rw_ctrl, scope iop_spu, type rw */ +typedef struct { + unsigned int fsm : 1; + unsigned int en : 1; + unsigned int dummy1 : 30; +} reg_iop_spu_rw_ctrl; +#define REG_RD_ADDR_iop_spu_rw_ctrl 72 +#define REG_WR_ADDR_iop_spu_rw_ctrl 72 + +/* Register rw_fsm_inputs3_0, scope iop_spu, type rw */ +typedef struct { + unsigned int val0 : 5; + unsigned int src0 : 3; + unsigned int val1 : 5; + unsigned int src1 : 3; + unsigned int val2 : 5; + unsigned int src2 : 3; + unsigned int val3 : 5; + unsigned int src3 : 3; +} reg_iop_spu_rw_fsm_inputs3_0; +#define REG_RD_ADDR_iop_spu_rw_fsm_inputs3_0 76 +#define REG_WR_ADDR_iop_spu_rw_fsm_inputs3_0 76 + +/* Register rw_fsm_inputs7_4, scope iop_spu, type rw */ +typedef struct { + unsigned int val4 : 5; + unsigned int src4 : 3; + unsigned int val5 : 5; + unsigned int src5 : 3; + unsigned int val6 : 5; + unsigned int src6 : 3; + unsigned int val7 : 5; + unsigned int src7 : 3; +} reg_iop_spu_rw_fsm_inputs7_4; +#define REG_RD_ADDR_iop_spu_rw_fsm_inputs7_4 80 +#define REG_WR_ADDR_iop_spu_rw_fsm_inputs7_4 80 + +/* Register rw_gio_out, scope iop_spu, type rw */ +typedef unsigned int reg_iop_spu_rw_gio_out; +#define REG_RD_ADDR_iop_spu_rw_gio_out 84 +#define REG_WR_ADDR_iop_spu_rw_gio_out 84 + +/* Register rw_bus0_out, scope iop_spu, type rw */ +typedef unsigned int reg_iop_spu_rw_bus0_out; +#define REG_RD_ADDR_iop_spu_rw_bus0_out 88 +#define REG_WR_ADDR_iop_spu_rw_bus0_out 88 + +/* Register rw_bus1_out, scope iop_spu, type rw */ +typedef unsigned int reg_iop_spu_rw_bus1_out; +#define REG_RD_ADDR_iop_spu_rw_bus1_out 92 +#define REG_WR_ADDR_iop_spu_rw_bus1_out 92 + +/* Register r_gio_in, scope iop_spu, type r */ +typedef unsigned int reg_iop_spu_r_gio_in; +#define REG_RD_ADDR_iop_spu_r_gio_in 96 + +/* Register r_bus0_in, scope iop_spu, type r */ +typedef unsigned int reg_iop_spu_r_bus0_in; +#define REG_RD_ADDR_iop_spu_r_bus0_in 100 + +/* Register r_bus1_in, scope iop_spu, type r */ +typedef unsigned int reg_iop_spu_r_bus1_in; +#define REG_RD_ADDR_iop_spu_r_bus1_in 104 + +/* Register rw_gio_out_set, scope iop_spu, type rw */ +typedef unsigned int reg_iop_spu_rw_gio_out_set; +#define REG_RD_ADDR_iop_spu_rw_gio_out_set 108 +#define REG_WR_ADDR_iop_spu_rw_gio_out_set 108 + +/* Register rw_gio_out_clr, scope iop_spu, type rw */ +typedef unsigned int reg_iop_spu_rw_gio_out_clr; +#define REG_RD_ADDR_iop_spu_rw_gio_out_clr 112 +#define REG_WR_ADDR_iop_spu_rw_gio_out_clr 112 + +/* Register rs_wr_stat, scope iop_spu, type rs */ +typedef struct { + unsigned int r0 : 1; + unsigned int r1 : 1; + unsigned int r2 : 1; + unsigned int r3 : 1; + unsigned int r4 : 1; + unsigned int r5 : 1; + unsigned int r6 : 1; + unsigned int r7 : 1; + unsigned int r8 : 1; + unsigned int r9 : 1; + unsigned int r10 : 1; + unsigned int r11 : 1; + unsigned int r12 : 1; + unsigned int r13 : 1; + unsigned int r14 : 1; + unsigned int r15 : 1; + unsigned int dummy1 : 16; +} reg_iop_spu_rs_wr_stat; +#define REG_RD_ADDR_iop_spu_rs_wr_stat 116 + +/* Register r_wr_stat, scope iop_spu, type r */ +typedef struct { + unsigned int r0 : 1; + unsigned int r1 : 1; + unsigned int r2 : 1; + unsigned int r3 : 1; + unsigned int r4 : 1; + unsigned int r5 : 1; + unsigned int r6 : 1; + unsigned int r7 : 1; + unsigned int r8 : 1; + unsigned int r9 : 1; + unsigned int r10 : 1; + unsigned int r11 : 1; + unsigned int r12 : 1; + unsigned int r13 : 1; + unsigned int r14 : 1; + unsigned int r15 : 1; + unsigned int dummy1 : 16; +} reg_iop_spu_r_wr_stat; +#define REG_RD_ADDR_iop_spu_r_wr_stat 120 + +/* Register r_reg_indexed_by_bus0_in, scope iop_spu, type r */ +typedef unsigned int reg_iop_spu_r_reg_indexed_by_bus0_in; +#define REG_RD_ADDR_iop_spu_r_reg_indexed_by_bus0_in 124 + +/* Register r_stat_in, scope iop_spu, type r */ +typedef struct { + unsigned int timer_grp_lo : 4; + unsigned int fifo_out_last : 1; + unsigned int fifo_out_rdy : 1; + unsigned int fifo_out_all : 1; + unsigned int fifo_in_rdy : 1; + unsigned int dmc_out_all : 1; + unsigned int dmc_out_dth : 1; + unsigned int dmc_out_eop : 1; + unsigned int dmc_out_dv : 1; + unsigned int dmc_out_last : 1; + unsigned int dmc_out_cmd_rq : 1; + unsigned int dmc_out_cmd_rdy : 1; + unsigned int pcrc_correct : 1; + unsigned int timer_grp_hi : 4; + unsigned int dmc_in_sth : 1; + unsigned int dmc_in_full : 1; + unsigned int dmc_in_cmd_rdy : 1; + unsigned int spu_gio_out : 4; + unsigned int sync_clk12 : 1; + unsigned int scrc_out_data : 1; + unsigned int scrc_in_err : 1; + unsigned int mc_busy : 1; + unsigned int mc_owned : 1; +} reg_iop_spu_r_stat_in; +#define REG_RD_ADDR_iop_spu_r_stat_in 128 + +/* Register r_trigger_in, scope iop_spu, type r */ +typedef unsigned int reg_iop_spu_r_trigger_in; +#define REG_RD_ADDR_iop_spu_r_trigger_in 132 + +/* Register r_special_stat, scope iop_spu, type r */ +typedef struct { + unsigned int c_flag : 1; + unsigned int v_flag : 1; + unsigned int z_flag : 1; + unsigned int n_flag : 1; + unsigned int xor_bus0_r2_0 : 1; + unsigned int xor_bus1_r3_0 : 1; + unsigned int xor_bus0m_r2_0 : 1; + unsigned int xor_bus1m_r3_0 : 1; + unsigned int fsm_in0 : 1; + unsigned int fsm_in1 : 1; + unsigned int fsm_in2 : 1; + unsigned int fsm_in3 : 1; + unsigned int fsm_in4 : 1; + unsigned int fsm_in5 : 1; + unsigned int fsm_in6 : 1; + unsigned int fsm_in7 : 1; + unsigned int event0 : 1; + unsigned int event1 : 1; + unsigned int event2 : 1; + unsigned int event3 : 1; + unsigned int dummy1 : 12; +} reg_iop_spu_r_special_stat; +#define REG_RD_ADDR_iop_spu_r_special_stat 136 + +/* Register rw_reg_access, scope iop_spu, type rw */ +typedef struct { + unsigned int addr : 13; + unsigned int dummy1 : 3; + unsigned int imm_hi : 16; +} reg_iop_spu_rw_reg_access; +#define REG_RD_ADDR_iop_spu_rw_reg_access 140 +#define REG_WR_ADDR_iop_spu_rw_reg_access 140 + +#define STRIDE_iop_spu_rw_event_cfg 4 +/* Register rw_event_cfg, scope iop_spu, type rw */ +typedef struct { + unsigned int addr : 12; + unsigned int src : 2; + unsigned int eq_en : 1; + unsigned int eq_inv : 1; + unsigned int gt_en : 1; + unsigned int gt_inv : 1; + unsigned int dummy1 : 14; +} reg_iop_spu_rw_event_cfg; +#define REG_RD_ADDR_iop_spu_rw_event_cfg 144 +#define REG_WR_ADDR_iop_spu_rw_event_cfg 144 + +#define STRIDE_iop_spu_rw_event_mask 4 +/* Register rw_event_mask, scope iop_spu, type rw */ +typedef unsigned int reg_iop_spu_rw_event_mask; +#define REG_RD_ADDR_iop_spu_rw_event_mask 160 +#define REG_WR_ADDR_iop_spu_rw_event_mask 160 + +#define STRIDE_iop_spu_rw_event_val 4 +/* Register rw_event_val, scope iop_spu, type rw */ +typedef unsigned int reg_iop_spu_rw_event_val; +#define REG_RD_ADDR_iop_spu_rw_event_val 176 +#define REG_WR_ADDR_iop_spu_rw_event_val 176 + +/* Register rw_event_ret, scope iop_spu, type rw */ +typedef struct { + unsigned int addr : 12; + unsigned int dummy1 : 20; +} reg_iop_spu_rw_event_ret; +#define REG_RD_ADDR_iop_spu_rw_event_ret 192 +#define REG_WR_ADDR_iop_spu_rw_event_ret 192 + +/* Register r_trace, scope iop_spu, type r */ +typedef struct { + unsigned int fsm : 1; + unsigned int en : 1; + unsigned int c_flag : 1; + unsigned int v_flag : 1; + unsigned int z_flag : 1; + unsigned int n_flag : 1; + unsigned int seq_addr : 12; + unsigned int dummy1 : 2; + unsigned int fsm_addr : 12; +} reg_iop_spu_r_trace; +#define REG_RD_ADDR_iop_spu_r_trace 196 + +/* Register r_fsm_trace, scope iop_spu, type r */ +typedef struct { + unsigned int fsm : 1; + unsigned int en : 1; + unsigned int tmr_done : 1; + unsigned int inp0 : 1; + unsigned int inp1 : 1; + unsigned int inp2 : 1; + unsigned int inp3 : 1; + unsigned int event0 : 1; + unsigned int event1 : 1; + unsigned int event2 : 1; + unsigned int event3 : 1; + unsigned int gio_out : 8; + unsigned int dummy1 : 1; + unsigned int fsm_addr : 12; +} reg_iop_spu_r_fsm_trace; +#define REG_RD_ADDR_iop_spu_r_fsm_trace 200 + +#define STRIDE_iop_spu_rw_brp 4 +/* Register rw_brp, scope iop_spu, type rw */ +typedef struct { + unsigned int addr : 12; + unsigned int fsm : 1; + unsigned int en : 1; + unsigned int dummy1 : 18; +} reg_iop_spu_rw_brp; +#define REG_RD_ADDR_iop_spu_rw_brp 204 +#define REG_WR_ADDR_iop_spu_rw_brp 204 + + +/* Constants */ +enum { + regk_iop_spu_attn_hi = 0x00000005, + regk_iop_spu_attn_lo = 0x00000005, + regk_iop_spu_attn_r0 = 0x00000000, + regk_iop_spu_attn_r1 = 0x00000001, + regk_iop_spu_attn_r10 = 0x00000002, + regk_iop_spu_attn_r11 = 0x00000003, + regk_iop_spu_attn_r12 = 0x00000004, + regk_iop_spu_attn_r13 = 0x00000005, + regk_iop_spu_attn_r14 = 0x00000006, + regk_iop_spu_attn_r15 = 0x00000007, + regk_iop_spu_attn_r2 = 0x00000002, + regk_iop_spu_attn_r3 = 0x00000003, + regk_iop_spu_attn_r4 = 0x00000004, + regk_iop_spu_attn_r5 = 0x00000005, + regk_iop_spu_attn_r6 = 0x00000006, + regk_iop_spu_attn_r7 = 0x00000007, + regk_iop_spu_attn_r8 = 0x00000000, + regk_iop_spu_attn_r9 = 0x00000001, + regk_iop_spu_c = 0x00000000, + regk_iop_spu_flag = 0x00000002, + regk_iop_spu_gio_in = 0x00000000, + regk_iop_spu_gio_out = 0x00000005, + regk_iop_spu_gio_out0 = 0x00000008, + regk_iop_spu_gio_out1 = 0x00000009, + regk_iop_spu_gio_out2 = 0x0000000a, + regk_iop_spu_gio_out3 = 0x0000000b, + regk_iop_spu_gio_out4 = 0x0000000c, + regk_iop_spu_gio_out5 = 0x0000000d, + regk_iop_spu_gio_out6 = 0x0000000e, + regk_iop_spu_gio_out7 = 0x0000000f, + regk_iop_spu_n = 0x00000003, + regk_iop_spu_no = 0x00000000, + regk_iop_spu_r0 = 0x00000008, + regk_iop_spu_r1 = 0x00000009, + regk_iop_spu_r10 = 0x0000000a, + regk_iop_spu_r11 = 0x0000000b, + regk_iop_spu_r12 = 0x0000000c, + regk_iop_spu_r13 = 0x0000000d, + regk_iop_spu_r14 = 0x0000000e, + regk_iop_spu_r15 = 0x0000000f, + regk_iop_spu_r2 = 0x0000000a, + regk_iop_spu_r3 = 0x0000000b, + regk_iop_spu_r4 = 0x0000000c, + regk_iop_spu_r5 = 0x0000000d, + regk_iop_spu_r6 = 0x0000000e, + regk_iop_spu_r7 = 0x0000000f, + regk_iop_spu_r8 = 0x00000008, + regk_iop_spu_r9 = 0x00000009, + regk_iop_spu_reg_hi = 0x00000002, + regk_iop_spu_reg_lo = 0x00000002, + regk_iop_spu_rw_brp_default = 0x00000000, + regk_iop_spu_rw_brp_size = 0x00000004, + regk_iop_spu_rw_ctrl_default = 0x00000000, + regk_iop_spu_rw_event_cfg_size = 0x00000004, + regk_iop_spu_rw_event_mask_size = 0x00000004, + regk_iop_spu_rw_event_val_size = 0x00000004, + regk_iop_spu_rw_gio_out_default = 0x00000000, + regk_iop_spu_rw_r_size = 0x00000010, + regk_iop_spu_rw_reg_access_default = 0x00000000, + regk_iop_spu_stat_in = 0x00000002, + regk_iop_spu_statin_hi = 0x00000004, + regk_iop_spu_statin_lo = 0x00000004, + regk_iop_spu_trig = 0x00000003, + regk_iop_spu_trigger = 0x00000006, + regk_iop_spu_v = 0x00000001, + regk_iop_spu_wsts_gioout_spec = 0x00000001, + regk_iop_spu_xor = 0x00000003, + regk_iop_spu_xor_bus0_r2_0 = 0x00000000, + regk_iop_spu_xor_bus0m_r2_0 = 0x00000002, + regk_iop_spu_xor_bus1_r3_0 = 0x00000001, + regk_iop_spu_xor_bus1m_r3_0 = 0x00000003, + regk_iop_spu_yes = 0x00000001, + regk_iop_spu_z = 0x00000002 +}; +#endif /* __iop_spu_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_cfg_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_cfg_defs.h new file mode 100644 index 000000000000..d7b6d75884d2 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_cfg_defs.h @@ -0,0 +1,1042 @@ +#ifndef __iop_sw_cfg_defs_h +#define __iop_sw_cfg_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r + * id: + * last modfied: Mon Apr 11 16:10:19 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_cfg_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r + * id: $Id: iop_sw_cfg_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_cfg */ + +/* Register rw_crc_par0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_crc_par0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_crc_par0_owner 0 +#define REG_WR_ADDR_iop_sw_cfg_rw_crc_par0_owner 0 + +/* Register rw_crc_par1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_crc_par1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_crc_par1_owner 4 +#define REG_WR_ADDR_iop_sw_cfg_rw_crc_par1_owner 4 + +/* Register rw_dmc_in0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_dmc_in0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_in0_owner 8 +#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_in0_owner 8 + +/* Register rw_dmc_in1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_dmc_in1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_in1_owner 12 +#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_in1_owner 12 + +/* Register rw_dmc_out0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_dmc_out0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_out0_owner 16 +#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_out0_owner 16 + +/* Register rw_dmc_out1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_dmc_out1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_out1_owner 20 +#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_out1_owner 20 + +/* Register rw_fifo_in0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_in0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in0_owner 24 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in0_owner 24 + +/* Register rw_fifo_in0_extra_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_in0_extra_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in0_extra_owner 28 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in0_extra_owner 28 + +/* Register rw_fifo_in1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_in1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in1_owner 32 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in1_owner 32 + +/* Register rw_fifo_in1_extra_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_in1_extra_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in1_extra_owner 36 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in1_extra_owner 36 + +/* Register rw_fifo_out0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_out0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out0_owner 40 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out0_owner 40 + +/* Register rw_fifo_out0_extra_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_out0_extra_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out0_extra_owner 44 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out0_extra_owner 44 + +/* Register rw_fifo_out1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_out1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out1_owner 48 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out1_owner 48 + +/* Register rw_fifo_out1_extra_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_out1_extra_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out1_extra_owner 52 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out1_extra_owner 52 + +/* Register rw_sap_in_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_sap_in_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_sap_in_owner 56 +#define REG_WR_ADDR_iop_sw_cfg_rw_sap_in_owner 56 + +/* Register rw_sap_out_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_sap_out_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_sap_out_owner 60 +#define REG_WR_ADDR_iop_sw_cfg_rw_sap_out_owner 60 + +/* Register rw_scrc_in0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_scrc_in0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_in0_owner 64 +#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_in0_owner 64 + +/* Register rw_scrc_in1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_scrc_in1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_in1_owner 68 +#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_in1_owner 68 + +/* Register rw_scrc_out0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_scrc_out0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_out0_owner 72 +#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_out0_owner 72 + +/* Register rw_scrc_out1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_scrc_out1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_out1_owner 76 +#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_out1_owner 76 + +/* Register rw_spu0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_spu0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_spu0_owner 80 +#define REG_WR_ADDR_iop_sw_cfg_rw_spu0_owner 80 + +/* Register rw_spu1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_spu1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_spu1_owner 84 +#define REG_WR_ADDR_iop_sw_cfg_rw_spu1_owner 84 + +/* Register rw_timer_grp0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_timer_grp0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp0_owner 88 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp0_owner 88 + +/* Register rw_timer_grp1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_timer_grp1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp1_owner 92 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp1_owner 92 + +/* Register rw_timer_grp2_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_timer_grp2_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp2_owner 96 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp2_owner 96 + +/* Register rw_timer_grp3_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_timer_grp3_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp3_owner 100 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp3_owner 100 + +/* Register rw_trigger_grp0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp0_owner 104 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp0_owner 104 + +/* Register rw_trigger_grp1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp1_owner 108 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp1_owner 108 + +/* Register rw_trigger_grp2_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp2_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp2_owner 112 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp2_owner 112 + +/* Register rw_trigger_grp3_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp3_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp3_owner 116 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp3_owner 116 + +/* Register rw_trigger_grp4_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp4_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp4_owner 120 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp4_owner 120 + +/* Register rw_trigger_grp5_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp5_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp5_owner 124 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp5_owner 124 + +/* Register rw_trigger_grp6_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp6_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp6_owner 128 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp6_owner 128 + +/* Register rw_trigger_grp7_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp7_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp7_owner 132 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp7_owner 132 + +/* Register rw_bus0_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cfg_rw_bus0_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus0_mask 136 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus0_mask 136 + +/* Register rw_bus0_oe_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cfg_rw_bus0_oe_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus0_oe_mask 140 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus0_oe_mask 140 + +/* Register rw_bus1_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cfg_rw_bus1_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus1_mask 144 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus1_mask 144 + +/* Register rw_bus1_oe_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cfg_rw_bus1_oe_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus1_oe_mask 148 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus1_oe_mask 148 + +/* Register rw_gio_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cfg_rw_gio_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_mask 152 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_mask 152 + +/* Register rw_gio_oe_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cfg_rw_gio_oe_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_oe_mask 156 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_oe_mask 156 + +/* Register rw_pinmapping, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int bus0_byte0 : 2; + unsigned int bus0_byte1 : 2; + unsigned int bus0_byte2 : 2; + unsigned int bus0_byte3 : 2; + unsigned int bus1_byte0 : 2; + unsigned int bus1_byte1 : 2; + unsigned int bus1_byte2 : 2; + unsigned int bus1_byte3 : 2; + unsigned int gio3_0 : 2; + unsigned int gio7_4 : 2; + unsigned int gio11_8 : 2; + unsigned int gio15_12 : 2; + unsigned int gio19_16 : 2; + unsigned int gio23_20 : 2; + unsigned int gio27_24 : 2; + unsigned int gio31_28 : 2; +} reg_iop_sw_cfg_rw_pinmapping; +#define REG_RD_ADDR_iop_sw_cfg_rw_pinmapping 160 +#define REG_WR_ADDR_iop_sw_cfg_rw_pinmapping 160 + +/* Register rw_bus_out_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int bus0_lo : 3; + unsigned int bus0_hi : 3; + unsigned int bus0_lo_oe : 3; + unsigned int bus0_hi_oe : 3; + unsigned int bus1_lo : 3; + unsigned int bus1_hi : 3; + unsigned int bus1_lo_oe : 3; + unsigned int bus1_hi_oe : 3; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_bus_out_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus_out_cfg 164 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus_out_cfg 164 + +/* Register rw_gio_out_grp0_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio0 : 4; + unsigned int gio0_oe : 2; + unsigned int gio1 : 4; + unsigned int gio1_oe : 2; + unsigned int gio2 : 4; + unsigned int gio2_oe : 2; + unsigned int gio3 : 4; + unsigned int gio3_oe : 2; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_gio_out_grp0_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp0_cfg 168 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp0_cfg 168 + +/* Register rw_gio_out_grp1_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio4 : 4; + unsigned int gio4_oe : 2; + unsigned int gio5 : 4; + unsigned int gio5_oe : 2; + unsigned int gio6 : 4; + unsigned int gio6_oe : 2; + unsigned int gio7 : 4; + unsigned int gio7_oe : 2; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_gio_out_grp1_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp1_cfg 172 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp1_cfg 172 + +/* Register rw_gio_out_grp2_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio8 : 4; + unsigned int gio8_oe : 2; + unsigned int gio9 : 4; + unsigned int gio9_oe : 2; + unsigned int gio10 : 4; + unsigned int gio10_oe : 2; + unsigned int gio11 : 4; + unsigned int gio11_oe : 2; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_gio_out_grp2_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp2_cfg 176 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp2_cfg 176 + +/* Register rw_gio_out_grp3_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio12 : 4; + unsigned int gio12_oe : 2; + unsigned int gio13 : 4; + unsigned int gio13_oe : 2; + unsigned int gio14 : 4; + unsigned int gio14_oe : 2; + unsigned int gio15 : 4; + unsigned int gio15_oe : 2; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_gio_out_grp3_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp3_cfg 180 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp3_cfg 180 + +/* Register rw_gio_out_grp4_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio16 : 4; + unsigned int gio16_oe : 2; + unsigned int gio17 : 4; + unsigned int gio17_oe : 2; + unsigned int gio18 : 4; + unsigned int gio18_oe : 2; + unsigned int gio19 : 4; + unsigned int gio19_oe : 2; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_gio_out_grp4_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp4_cfg 184 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp4_cfg 184 + +/* Register rw_gio_out_grp5_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio20 : 4; + unsigned int gio20_oe : 2; + unsigned int gio21 : 4; + unsigned int gio21_oe : 2; + unsigned int gio22 : 4; + unsigned int gio22_oe : 2; + unsigned int gio23 : 4; + unsigned int gio23_oe : 2; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_gio_out_grp5_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp5_cfg 188 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp5_cfg 188 + +/* Register rw_gio_out_grp6_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio24 : 4; + unsigned int gio24_oe : 2; + unsigned int gio25 : 4; + unsigned int gio25_oe : 2; + unsigned int gio26 : 4; + unsigned int gio26_oe : 2; + unsigned int gio27 : 4; + unsigned int gio27_oe : 2; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_gio_out_grp6_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp6_cfg 192 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp6_cfg 192 + +/* Register rw_gio_out_grp7_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio28 : 4; + unsigned int gio28_oe : 2; + unsigned int gio29 : 4; + unsigned int gio29_oe : 2; + unsigned int gio30 : 4; + unsigned int gio30_oe : 2; + unsigned int gio31 : 4; + unsigned int gio31_oe : 2; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_gio_out_grp7_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp7_cfg 196 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp7_cfg 196 + +/* Register rw_spu0_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int bus0_in : 2; + unsigned int bus1_in : 2; + unsigned int dummy1 : 28; +} reg_iop_sw_cfg_rw_spu0_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_spu0_cfg 200 +#define REG_WR_ADDR_iop_sw_cfg_rw_spu0_cfg 200 + +/* Register rw_spu1_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int bus0_in : 2; + unsigned int bus1_in : 2; + unsigned int dummy1 : 28; +} reg_iop_sw_cfg_rw_spu1_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_spu1_cfg 204 +#define REG_WR_ADDR_iop_sw_cfg_rw_spu1_cfg 204 + +/* Register rw_timer_grp0_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int ext_clk : 3; + unsigned int tmr0_en : 1; + unsigned int tmr1_en : 1; + unsigned int tmr2_en : 1; + unsigned int tmr3_en : 1; + unsigned int tmr0_dis : 1; + unsigned int tmr1_dis : 1; + unsigned int tmr2_dis : 1; + unsigned int tmr3_dis : 1; + unsigned int dummy1 : 21; +} reg_iop_sw_cfg_rw_timer_grp0_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp0_cfg 208 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp0_cfg 208 + +/* Register rw_timer_grp1_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int ext_clk : 3; + unsigned int tmr0_en : 1; + unsigned int tmr1_en : 1; + unsigned int tmr2_en : 1; + unsigned int tmr3_en : 1; + unsigned int tmr0_dis : 1; + unsigned int tmr1_dis : 1; + unsigned int tmr2_dis : 1; + unsigned int tmr3_dis : 1; + unsigned int dummy1 : 21; +} reg_iop_sw_cfg_rw_timer_grp1_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp1_cfg 212 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp1_cfg 212 + +/* Register rw_timer_grp2_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int ext_clk : 3; + unsigned int tmr0_en : 1; + unsigned int tmr1_en : 1; + unsigned int tmr2_en : 1; + unsigned int tmr3_en : 1; + unsigned int tmr0_dis : 1; + unsigned int tmr1_dis : 1; + unsigned int tmr2_dis : 1; + unsigned int tmr3_dis : 1; + unsigned int dummy1 : 21; +} reg_iop_sw_cfg_rw_timer_grp2_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp2_cfg 216 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp2_cfg 216 + +/* Register rw_timer_grp3_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int ext_clk : 3; + unsigned int tmr0_en : 1; + unsigned int tmr1_en : 1; + unsigned int tmr2_en : 1; + unsigned int tmr3_en : 1; + unsigned int tmr0_dis : 1; + unsigned int tmr1_dis : 1; + unsigned int tmr2_dis : 1; + unsigned int tmr3_dis : 1; + unsigned int dummy1 : 21; +} reg_iop_sw_cfg_rw_timer_grp3_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp3_cfg 220 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp3_cfg 220 + +/* Register rw_trigger_grps_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int grp0_dis : 1; + unsigned int grp0_en : 1; + unsigned int grp1_dis : 1; + unsigned int grp1_en : 1; + unsigned int grp2_dis : 1; + unsigned int grp2_en : 1; + unsigned int grp3_dis : 1; + unsigned int grp3_en : 1; + unsigned int grp4_dis : 1; + unsigned int grp4_en : 1; + unsigned int grp5_dis : 1; + unsigned int grp5_en : 1; + unsigned int grp6_dis : 1; + unsigned int grp6_en : 1; + unsigned int grp7_dis : 1; + unsigned int grp7_en : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_trigger_grps_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grps_cfg 224 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grps_cfg 224 + +/* Register rw_pdp0_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int dmc0_usr : 1; + unsigned int out_strb : 5; + unsigned int in_src : 3; + unsigned int in_size : 3; + unsigned int in_last : 2; + unsigned int in_strb : 4; + unsigned int out_src : 1; + unsigned int dummy1 : 13; +} reg_iop_sw_cfg_rw_pdp0_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_pdp0_cfg 228 +#define REG_WR_ADDR_iop_sw_cfg_rw_pdp0_cfg 228 + +/* Register rw_pdp1_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int dmc1_usr : 1; + unsigned int out_strb : 5; + unsigned int in_src : 3; + unsigned int in_size : 3; + unsigned int in_last : 2; + unsigned int in_strb : 4; + unsigned int out_src : 1; + unsigned int dummy1 : 13; +} reg_iop_sw_cfg_rw_pdp1_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_pdp1_cfg 232 +#define REG_WR_ADDR_iop_sw_cfg_rw_pdp1_cfg 232 + +/* Register rw_sdp_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int sdp_out0_strb : 3; + unsigned int sdp_out1_strb : 3; + unsigned int sdp_in0_data : 3; + unsigned int sdp_in0_last : 2; + unsigned int sdp_in0_strb : 3; + unsigned int sdp_in1_data : 3; + unsigned int sdp_in1_last : 2; + unsigned int sdp_in1_strb : 3; + unsigned int dummy1 : 10; +} reg_iop_sw_cfg_rw_sdp_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_sdp_cfg 236 +#define REG_WR_ADDR_iop_sw_cfg_rw_sdp_cfg 236 + + +/* Constants */ +enum { + regk_iop_sw_cfg_a = 0x00000001, + regk_iop_sw_cfg_b = 0x00000002, + regk_iop_sw_cfg_bus0 = 0x00000000, + regk_iop_sw_cfg_bus0_rot16 = 0x00000004, + regk_iop_sw_cfg_bus0_rot24 = 0x00000006, + regk_iop_sw_cfg_bus0_rot8 = 0x00000002, + regk_iop_sw_cfg_bus1 = 0x00000001, + regk_iop_sw_cfg_bus1_rot16 = 0x00000005, + regk_iop_sw_cfg_bus1_rot24 = 0x00000007, + regk_iop_sw_cfg_bus1_rot8 = 0x00000003, + regk_iop_sw_cfg_clk12 = 0x00000000, + regk_iop_sw_cfg_cpu = 0x00000000, + regk_iop_sw_cfg_dmc0 = 0x00000000, + regk_iop_sw_cfg_dmc1 = 0x00000001, + regk_iop_sw_cfg_gated_clk0 = 0x00000010, + regk_iop_sw_cfg_gated_clk1 = 0x00000011, + regk_iop_sw_cfg_gated_clk2 = 0x00000012, + regk_iop_sw_cfg_gated_clk3 = 0x00000013, + regk_iop_sw_cfg_gio0 = 0x00000004, + regk_iop_sw_cfg_gio1 = 0x00000001, + regk_iop_sw_cfg_gio2 = 0x00000005, + regk_iop_sw_cfg_gio3 = 0x00000002, + regk_iop_sw_cfg_gio4 = 0x00000006, + regk_iop_sw_cfg_gio5 = 0x00000003, + regk_iop_sw_cfg_gio6 = 0x00000007, + regk_iop_sw_cfg_gio7 = 0x00000004, + regk_iop_sw_cfg_gio_in0 = 0x00000000, + regk_iop_sw_cfg_gio_in1 = 0x00000001, + regk_iop_sw_cfg_gio_in10 = 0x00000002, + regk_iop_sw_cfg_gio_in11 = 0x00000003, + regk_iop_sw_cfg_gio_in14 = 0x00000004, + regk_iop_sw_cfg_gio_in15 = 0x00000005, + regk_iop_sw_cfg_gio_in18 = 0x00000002, + regk_iop_sw_cfg_gio_in19 = 0x00000003, + regk_iop_sw_cfg_gio_in20 = 0x00000004, + regk_iop_sw_cfg_gio_in21 = 0x00000005, + regk_iop_sw_cfg_gio_in26 = 0x00000006, + regk_iop_sw_cfg_gio_in27 = 0x00000007, + regk_iop_sw_cfg_gio_in28 = 0x00000006, + regk_iop_sw_cfg_gio_in29 = 0x00000007, + regk_iop_sw_cfg_gio_in4 = 0x00000000, + regk_iop_sw_cfg_gio_in5 = 0x00000001, + regk_iop_sw_cfg_last_timer_grp0_tmr2 = 0x00000001, + regk_iop_sw_cfg_last_timer_grp1_tmr2 = 0x00000001, + regk_iop_sw_cfg_last_timer_grp2_tmr2 = 0x00000002, + regk_iop_sw_cfg_last_timer_grp2_tmr3 = 0x00000003, + regk_iop_sw_cfg_last_timer_grp3_tmr2 = 0x00000002, + regk_iop_sw_cfg_last_timer_grp3_tmr3 = 0x00000003, + regk_iop_sw_cfg_mpu = 0x00000001, + regk_iop_sw_cfg_none = 0x00000000, + regk_iop_sw_cfg_par0 = 0x00000000, + regk_iop_sw_cfg_par1 = 0x00000001, + regk_iop_sw_cfg_pdp_out0 = 0x00000002, + regk_iop_sw_cfg_pdp_out0_hi = 0x00000001, + regk_iop_sw_cfg_pdp_out0_hi_rot8 = 0x00000005, + regk_iop_sw_cfg_pdp_out0_lo = 0x00000000, + regk_iop_sw_cfg_pdp_out0_lo_rot8 = 0x00000004, + regk_iop_sw_cfg_pdp_out1 = 0x00000003, + regk_iop_sw_cfg_pdp_out1_hi = 0x00000003, + regk_iop_sw_cfg_pdp_out1_hi_rot8 = 0x00000005, + regk_iop_sw_cfg_pdp_out1_lo = 0x00000002, + regk_iop_sw_cfg_pdp_out1_lo_rot8 = 0x00000004, + regk_iop_sw_cfg_rw_bus0_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_bus0_oe_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_bus1_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_bus1_oe_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_bus_out_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_crc_par0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_crc_par1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_dmc_in0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_dmc_in1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_dmc_out0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_dmc_out1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_in0_extra_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_in0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_in1_extra_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_in1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_out0_extra_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_out0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_out1_extra_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_out1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_oe_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp0_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp1_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp2_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp3_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp4_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp5_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp6_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp7_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_pdp0_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_pdp1_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_pinmapping_default = 0x55555555, + regk_iop_sw_cfg_rw_sap_in_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_sap_out_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_scrc_in0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_scrc_in1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_scrc_out0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_scrc_out1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_sdp_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_spu0_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_spu0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_spu1_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_spu1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp0_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp1_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp2_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp2_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp3_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp3_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp2_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp3_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp4_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp5_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp6_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp7_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grps_cfg_default = 0x00000000, + regk_iop_sw_cfg_sdp_out0 = 0x00000008, + regk_iop_sw_cfg_sdp_out1 = 0x00000009, + regk_iop_sw_cfg_size16 = 0x00000002, + regk_iop_sw_cfg_size24 = 0x00000003, + regk_iop_sw_cfg_size32 = 0x00000004, + regk_iop_sw_cfg_size8 = 0x00000001, + regk_iop_sw_cfg_spu0 = 0x00000002, + regk_iop_sw_cfg_spu0_bus_out0_hi = 0x00000006, + regk_iop_sw_cfg_spu0_bus_out0_lo = 0x00000006, + regk_iop_sw_cfg_spu0_bus_out1_hi = 0x00000007, + regk_iop_sw_cfg_spu0_bus_out1_lo = 0x00000007, + regk_iop_sw_cfg_spu0_g0 = 0x0000000e, + regk_iop_sw_cfg_spu0_g1 = 0x0000000e, + regk_iop_sw_cfg_spu0_g2 = 0x0000000e, + regk_iop_sw_cfg_spu0_g3 = 0x0000000e, + regk_iop_sw_cfg_spu0_g4 = 0x0000000e, + regk_iop_sw_cfg_spu0_g5 = 0x0000000e, + regk_iop_sw_cfg_spu0_g6 = 0x0000000e, + regk_iop_sw_cfg_spu0_g7 = 0x0000000e, + regk_iop_sw_cfg_spu0_gio0 = 0x00000000, + regk_iop_sw_cfg_spu0_gio1 = 0x00000001, + regk_iop_sw_cfg_spu0_gio2 = 0x00000000, + regk_iop_sw_cfg_spu0_gio5 = 0x00000005, + regk_iop_sw_cfg_spu0_gio6 = 0x00000006, + regk_iop_sw_cfg_spu0_gio7 = 0x00000007, + regk_iop_sw_cfg_spu0_gio_out0 = 0x00000008, + regk_iop_sw_cfg_spu0_gio_out1 = 0x00000009, + regk_iop_sw_cfg_spu0_gio_out2 = 0x0000000a, + regk_iop_sw_cfg_spu0_gio_out3 = 0x0000000b, + regk_iop_sw_cfg_spu0_gio_out4 = 0x0000000c, + regk_iop_sw_cfg_spu0_gio_out5 = 0x0000000d, + regk_iop_sw_cfg_spu0_gio_out6 = 0x0000000e, + regk_iop_sw_cfg_spu0_gio_out7 = 0x0000000f, + regk_iop_sw_cfg_spu0_gioout0 = 0x00000000, + regk_iop_sw_cfg_spu0_gioout1 = 0x00000000, + regk_iop_sw_cfg_spu0_gioout10 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout11 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout12 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout13 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout14 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout15 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout16 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout17 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout18 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout19 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout2 = 0x00000002, + regk_iop_sw_cfg_spu0_gioout20 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout21 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout22 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout23 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout24 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout25 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout26 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout27 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout28 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout29 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout3 = 0x00000002, + regk_iop_sw_cfg_spu0_gioout30 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout31 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout4 = 0x00000004, + regk_iop_sw_cfg_spu0_gioout5 = 0x00000004, + regk_iop_sw_cfg_spu0_gioout6 = 0x00000006, + regk_iop_sw_cfg_spu0_gioout7 = 0x00000006, + regk_iop_sw_cfg_spu0_gioout8 = 0x0000000e, + regk_iop_sw_cfg_spu0_gioout9 = 0x0000000e, + regk_iop_sw_cfg_spu1 = 0x00000003, + regk_iop_sw_cfg_spu1_bus_out0_hi = 0x00000006, + regk_iop_sw_cfg_spu1_bus_out0_lo = 0x00000006, + regk_iop_sw_cfg_spu1_bus_out1_hi = 0x00000007, + regk_iop_sw_cfg_spu1_bus_out1_lo = 0x00000007, + regk_iop_sw_cfg_spu1_g0 = 0x0000000f, + regk_iop_sw_cfg_spu1_g1 = 0x0000000f, + regk_iop_sw_cfg_spu1_g2 = 0x0000000f, + regk_iop_sw_cfg_spu1_g3 = 0x0000000f, + regk_iop_sw_cfg_spu1_g4 = 0x0000000f, + regk_iop_sw_cfg_spu1_g5 = 0x0000000f, + regk_iop_sw_cfg_spu1_g6 = 0x0000000f, + regk_iop_sw_cfg_spu1_g7 = 0x0000000f, + regk_iop_sw_cfg_spu1_gio0 = 0x00000002, + regk_iop_sw_cfg_spu1_gio1 = 0x00000003, + regk_iop_sw_cfg_spu1_gio2 = 0x00000002, + regk_iop_sw_cfg_spu1_gio5 = 0x00000005, + regk_iop_sw_cfg_spu1_gio6 = 0x00000006, + regk_iop_sw_cfg_spu1_gio7 = 0x00000007, + regk_iop_sw_cfg_spu1_gio_out0 = 0x00000008, + regk_iop_sw_cfg_spu1_gio_out1 = 0x00000009, + regk_iop_sw_cfg_spu1_gio_out2 = 0x0000000a, + regk_iop_sw_cfg_spu1_gio_out3 = 0x0000000b, + regk_iop_sw_cfg_spu1_gio_out4 = 0x0000000c, + regk_iop_sw_cfg_spu1_gio_out5 = 0x0000000d, + regk_iop_sw_cfg_spu1_gio_out6 = 0x0000000e, + regk_iop_sw_cfg_spu1_gio_out7 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout0 = 0x00000001, + regk_iop_sw_cfg_spu1_gioout1 = 0x00000001, + regk_iop_sw_cfg_spu1_gioout10 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout11 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout12 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout13 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout14 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout15 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout16 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout17 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout18 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout19 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout2 = 0x00000003, + regk_iop_sw_cfg_spu1_gioout20 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout21 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout22 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout23 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout24 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout25 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout26 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout27 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout28 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout29 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout3 = 0x00000003, + regk_iop_sw_cfg_spu1_gioout30 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout31 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout4 = 0x00000005, + regk_iop_sw_cfg_spu1_gioout5 = 0x00000005, + regk_iop_sw_cfg_spu1_gioout6 = 0x00000007, + regk_iop_sw_cfg_spu1_gioout7 = 0x00000007, + regk_iop_sw_cfg_spu1_gioout8 = 0x0000000f, + regk_iop_sw_cfg_spu1_gioout9 = 0x0000000f, + regk_iop_sw_cfg_strb_timer_grp0_tmr0 = 0x00000001, + regk_iop_sw_cfg_strb_timer_grp0_tmr1 = 0x00000002, + regk_iop_sw_cfg_strb_timer_grp1_tmr0 = 0x00000001, + regk_iop_sw_cfg_strb_timer_grp1_tmr1 = 0x00000002, + regk_iop_sw_cfg_strb_timer_grp2_tmr0 = 0x00000003, + regk_iop_sw_cfg_strb_timer_grp2_tmr1 = 0x00000002, + regk_iop_sw_cfg_strb_timer_grp3_tmr0 = 0x00000003, + regk_iop_sw_cfg_strb_timer_grp3_tmr1 = 0x00000002, + regk_iop_sw_cfg_timer_grp0 = 0x00000000, + regk_iop_sw_cfg_timer_grp0_rot = 0x00000001, + regk_iop_sw_cfg_timer_grp0_strb0 = 0x0000000a, + regk_iop_sw_cfg_timer_grp0_strb1 = 0x0000000a, + regk_iop_sw_cfg_timer_grp0_strb2 = 0x0000000a, + regk_iop_sw_cfg_timer_grp0_strb3 = 0x0000000a, + regk_iop_sw_cfg_timer_grp0_tmr0 = 0x00000004, + regk_iop_sw_cfg_timer_grp0_tmr1 = 0x00000004, + regk_iop_sw_cfg_timer_grp1 = 0x00000000, + regk_iop_sw_cfg_timer_grp1_rot = 0x00000001, + regk_iop_sw_cfg_timer_grp1_strb0 = 0x0000000b, + regk_iop_sw_cfg_timer_grp1_strb1 = 0x0000000b, + regk_iop_sw_cfg_timer_grp1_strb2 = 0x0000000b, + regk_iop_sw_cfg_timer_grp1_strb3 = 0x0000000b, + regk_iop_sw_cfg_timer_grp1_tmr0 = 0x00000005, + regk_iop_sw_cfg_timer_grp1_tmr1 = 0x00000005, + regk_iop_sw_cfg_timer_grp2 = 0x00000000, + regk_iop_sw_cfg_timer_grp2_rot = 0x00000001, + regk_iop_sw_cfg_timer_grp2_strb0 = 0x0000000c, + regk_iop_sw_cfg_timer_grp2_strb1 = 0x0000000c, + regk_iop_sw_cfg_timer_grp2_strb2 = 0x0000000c, + regk_iop_sw_cfg_timer_grp2_strb3 = 0x0000000c, + regk_iop_sw_cfg_timer_grp2_tmr0 = 0x00000006, + regk_iop_sw_cfg_timer_grp2_tmr1 = 0x00000006, + regk_iop_sw_cfg_timer_grp3 = 0x00000000, + regk_iop_sw_cfg_timer_grp3_rot = 0x00000001, + regk_iop_sw_cfg_timer_grp3_strb0 = 0x0000000d, + regk_iop_sw_cfg_timer_grp3_strb1 = 0x0000000d, + regk_iop_sw_cfg_timer_grp3_strb2 = 0x0000000d, + regk_iop_sw_cfg_timer_grp3_strb3 = 0x0000000d, + regk_iop_sw_cfg_timer_grp3_tmr0 = 0x00000007, + regk_iop_sw_cfg_timer_grp3_tmr1 = 0x00000007, + regk_iop_sw_cfg_trig0_0 = 0x00000000, + regk_iop_sw_cfg_trig0_1 = 0x00000000, + regk_iop_sw_cfg_trig0_2 = 0x00000000, + regk_iop_sw_cfg_trig0_3 = 0x00000000, + regk_iop_sw_cfg_trig1_0 = 0x00000000, + regk_iop_sw_cfg_trig1_1 = 0x00000000, + regk_iop_sw_cfg_trig1_2 = 0x00000000, + regk_iop_sw_cfg_trig1_3 = 0x00000000, + regk_iop_sw_cfg_trig2_0 = 0x00000000, + regk_iop_sw_cfg_trig2_1 = 0x00000000, + regk_iop_sw_cfg_trig2_2 = 0x00000000, + regk_iop_sw_cfg_trig2_3 = 0x00000000, + regk_iop_sw_cfg_trig3_0 = 0x00000000, + regk_iop_sw_cfg_trig3_1 = 0x00000000, + regk_iop_sw_cfg_trig3_2 = 0x00000000, + regk_iop_sw_cfg_trig3_3 = 0x00000000, + regk_iop_sw_cfg_trig4_0 = 0x00000001, + regk_iop_sw_cfg_trig4_1 = 0x00000001, + regk_iop_sw_cfg_trig4_2 = 0x00000001, + regk_iop_sw_cfg_trig4_3 = 0x00000001, + regk_iop_sw_cfg_trig5_0 = 0x00000001, + regk_iop_sw_cfg_trig5_1 = 0x00000001, + regk_iop_sw_cfg_trig5_2 = 0x00000001, + regk_iop_sw_cfg_trig5_3 = 0x00000001, + regk_iop_sw_cfg_trig6_0 = 0x00000001, + regk_iop_sw_cfg_trig6_1 = 0x00000001, + regk_iop_sw_cfg_trig6_2 = 0x00000001, + regk_iop_sw_cfg_trig6_3 = 0x00000001, + regk_iop_sw_cfg_trig7_0 = 0x00000001, + regk_iop_sw_cfg_trig7_1 = 0x00000001, + regk_iop_sw_cfg_trig7_2 = 0x00000001, + regk_iop_sw_cfg_trig7_3 = 0x00000001 +}; +#endif /* __iop_sw_cfg_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_cpu_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_cpu_defs.h new file mode 100644 index 000000000000..5fed844b19e2 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_cpu_defs.h @@ -0,0 +1,853 @@ +#ifndef __iop_sw_cpu_defs_h +#define __iop_sw_cpu_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r + * id: + * last modfied: Mon Apr 11 16:10:19 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_cpu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r + * id: $Id: iop_sw_cpu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_cpu */ + +/* Register rw_mc_ctrl, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int keep_owner : 1; + unsigned int cmd : 2; + unsigned int size : 3; + unsigned int wr_spu0_mem : 1; + unsigned int wr_spu1_mem : 1; + unsigned int dummy1 : 24; +} reg_iop_sw_cpu_rw_mc_ctrl; +#define REG_RD_ADDR_iop_sw_cpu_rw_mc_ctrl 0 +#define REG_WR_ADDR_iop_sw_cpu_rw_mc_ctrl 0 + +/* Register rw_mc_data, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_mc_data; +#define REG_RD_ADDR_iop_sw_cpu_rw_mc_data 4 +#define REG_WR_ADDR_iop_sw_cpu_rw_mc_data 4 + +/* Register rw_mc_addr, scope iop_sw_cpu, type rw */ +typedef unsigned int reg_iop_sw_cpu_rw_mc_addr; +#define REG_RD_ADDR_iop_sw_cpu_rw_mc_addr 8 +#define REG_WR_ADDR_iop_sw_cpu_rw_mc_addr 8 + +/* Register rs_mc_data, scope iop_sw_cpu, type rs */ +typedef unsigned int reg_iop_sw_cpu_rs_mc_data; +#define REG_RD_ADDR_iop_sw_cpu_rs_mc_data 12 + +/* Register r_mc_data, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_mc_data; +#define REG_RD_ADDR_iop_sw_cpu_r_mc_data 16 + +/* Register r_mc_stat, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int busy_cpu : 1; + unsigned int busy_mpu : 1; + unsigned int busy_spu0 : 1; + unsigned int busy_spu1 : 1; + unsigned int owned_by_cpu : 1; + unsigned int owned_by_mpu : 1; + unsigned int owned_by_spu0 : 1; + unsigned int owned_by_spu1 : 1; + unsigned int dummy1 : 24; +} reg_iop_sw_cpu_r_mc_stat; +#define REG_RD_ADDR_iop_sw_cpu_r_mc_stat 20 + +/* Register rw_bus0_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cpu_rw_bus0_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus0_clr_mask 24 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus0_clr_mask 24 + +/* Register rw_bus0_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cpu_rw_bus0_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus0_set_mask 28 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus0_set_mask 28 + +/* Register rw_bus0_oe_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cpu_rw_bus0_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus0_oe_clr_mask 32 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus0_oe_clr_mask 32 + +/* Register rw_bus0_oe_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cpu_rw_bus0_oe_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus0_oe_set_mask 36 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus0_oe_set_mask 36 + +/* Register r_bus0_in, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_bus0_in; +#define REG_RD_ADDR_iop_sw_cpu_r_bus0_in 40 + +/* Register rw_bus1_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cpu_rw_bus1_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus1_clr_mask 44 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus1_clr_mask 44 + +/* Register rw_bus1_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cpu_rw_bus1_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus1_set_mask 48 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus1_set_mask 48 + +/* Register rw_bus1_oe_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cpu_rw_bus1_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus1_oe_clr_mask 52 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus1_oe_clr_mask 52 + +/* Register rw_bus1_oe_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cpu_rw_bus1_oe_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus1_oe_set_mask 56 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus1_oe_set_mask 56 + +/* Register r_bus1_in, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_bus1_in; +#define REG_RD_ADDR_iop_sw_cpu_r_bus1_in 60 + +/* Register rw_gio_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_clr_mask 64 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_clr_mask 64 + +/* Register rw_gio_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_set_mask 68 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_set_mask 68 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_oe_clr_mask 72 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_oe_clr_mask 72 + +/* Register rw_gio_oe_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_oe_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_oe_set_mask 76 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_oe_set_mask 76 + +/* Register r_gio_in, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_gio_in; +#define REG_RD_ADDR_iop_sw_cpu_r_gio_in 80 + +/* Register rw_intr0_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu0_0 : 1; + unsigned int spu0_1 : 1; + unsigned int spu0_2 : 1; + unsigned int spu0_3 : 1; + unsigned int spu0_4 : 1; + unsigned int spu0_5 : 1; + unsigned int spu0_6 : 1; + unsigned int spu0_7 : 1; + unsigned int spu1_8 : 1; + unsigned int spu1_9 : 1; + unsigned int spu1_10 : 1; + unsigned int spu1_11 : 1; + unsigned int spu1_12 : 1; + unsigned int spu1_13 : 1; + unsigned int spu1_14 : 1; + unsigned int spu1_15 : 1; +} reg_iop_sw_cpu_rw_intr0_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_intr0_mask 84 +#define REG_WR_ADDR_iop_sw_cpu_rw_intr0_mask 84 + +/* Register rw_ack_intr0, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu0_0 : 1; + unsigned int spu0_1 : 1; + unsigned int spu0_2 : 1; + unsigned int spu0_3 : 1; + unsigned int spu0_4 : 1; + unsigned int spu0_5 : 1; + unsigned int spu0_6 : 1; + unsigned int spu0_7 : 1; + unsigned int spu1_8 : 1; + unsigned int spu1_9 : 1; + unsigned int spu1_10 : 1; + unsigned int spu1_11 : 1; + unsigned int spu1_12 : 1; + unsigned int spu1_13 : 1; + unsigned int spu1_14 : 1; + unsigned int spu1_15 : 1; +} reg_iop_sw_cpu_rw_ack_intr0; +#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr0 88 +#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr0 88 + +/* Register r_intr0, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu0_0 : 1; + unsigned int spu0_1 : 1; + unsigned int spu0_2 : 1; + unsigned int spu0_3 : 1; + unsigned int spu0_4 : 1; + unsigned int spu0_5 : 1; + unsigned int spu0_6 : 1; + unsigned int spu0_7 : 1; + unsigned int spu1_8 : 1; + unsigned int spu1_9 : 1; + unsigned int spu1_10 : 1; + unsigned int spu1_11 : 1; + unsigned int spu1_12 : 1; + unsigned int spu1_13 : 1; + unsigned int spu1_14 : 1; + unsigned int spu1_15 : 1; +} reg_iop_sw_cpu_r_intr0; +#define REG_RD_ADDR_iop_sw_cpu_r_intr0 92 + +/* Register r_masked_intr0, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu0_0 : 1; + unsigned int spu0_1 : 1; + unsigned int spu0_2 : 1; + unsigned int spu0_3 : 1; + unsigned int spu0_4 : 1; + unsigned int spu0_5 : 1; + unsigned int spu0_6 : 1; + unsigned int spu0_7 : 1; + unsigned int spu1_8 : 1; + unsigned int spu1_9 : 1; + unsigned int spu1_10 : 1; + unsigned int spu1_11 : 1; + unsigned int spu1_12 : 1; + unsigned int spu1_13 : 1; + unsigned int spu1_14 : 1; + unsigned int spu1_15 : 1; +} reg_iop_sw_cpu_r_masked_intr0; +#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr0 96 + +/* Register rw_intr1_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int spu0_8 : 1; + unsigned int spu0_9 : 1; + unsigned int spu0_10 : 1; + unsigned int spu0_11 : 1; + unsigned int spu0_12 : 1; + unsigned int spu0_13 : 1; + unsigned int spu0_14 : 1; + unsigned int spu0_15 : 1; + unsigned int spu1_0 : 1; + unsigned int spu1_1 : 1; + unsigned int spu1_2 : 1; + unsigned int spu1_3 : 1; + unsigned int spu1_4 : 1; + unsigned int spu1_5 : 1; + unsigned int spu1_6 : 1; + unsigned int spu1_7 : 1; +} reg_iop_sw_cpu_rw_intr1_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_intr1_mask 100 +#define REG_WR_ADDR_iop_sw_cpu_rw_intr1_mask 100 + +/* Register rw_ack_intr1, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int spu0_8 : 1; + unsigned int spu0_9 : 1; + unsigned int spu0_10 : 1; + unsigned int spu0_11 : 1; + unsigned int spu0_12 : 1; + unsigned int spu0_13 : 1; + unsigned int spu0_14 : 1; + unsigned int spu0_15 : 1; + unsigned int spu1_0 : 1; + unsigned int spu1_1 : 1; + unsigned int spu1_2 : 1; + unsigned int spu1_3 : 1; + unsigned int spu1_4 : 1; + unsigned int spu1_5 : 1; + unsigned int spu1_6 : 1; + unsigned int spu1_7 : 1; +} reg_iop_sw_cpu_rw_ack_intr1; +#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr1 104 +#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr1 104 + +/* Register r_intr1, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int spu0_8 : 1; + unsigned int spu0_9 : 1; + unsigned int spu0_10 : 1; + unsigned int spu0_11 : 1; + unsigned int spu0_12 : 1; + unsigned int spu0_13 : 1; + unsigned int spu0_14 : 1; + unsigned int spu0_15 : 1; + unsigned int spu1_0 : 1; + unsigned int spu1_1 : 1; + unsigned int spu1_2 : 1; + unsigned int spu1_3 : 1; + unsigned int spu1_4 : 1; + unsigned int spu1_5 : 1; + unsigned int spu1_6 : 1; + unsigned int spu1_7 : 1; +} reg_iop_sw_cpu_r_intr1; +#define REG_RD_ADDR_iop_sw_cpu_r_intr1 108 + +/* Register r_masked_intr1, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int spu0_8 : 1; + unsigned int spu0_9 : 1; + unsigned int spu0_10 : 1; + unsigned int spu0_11 : 1; + unsigned int spu0_12 : 1; + unsigned int spu0_13 : 1; + unsigned int spu0_14 : 1; + unsigned int spu0_15 : 1; + unsigned int spu1_0 : 1; + unsigned int spu1_1 : 1; + unsigned int spu1_2 : 1; + unsigned int spu1_3 : 1; + unsigned int spu1_4 : 1; + unsigned int spu1_5 : 1; + unsigned int spu1_6 : 1; + unsigned int spu1_7 : 1; +} reg_iop_sw_cpu_r_masked_intr1; +#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr1 112 + +/* Register rw_intr2_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int spu0_0 : 1; + unsigned int spu0_1 : 1; + unsigned int spu0_2 : 1; + unsigned int spu0_3 : 1; + unsigned int spu0_4 : 1; + unsigned int spu0_5 : 1; + unsigned int spu0_6 : 1; + unsigned int spu0_7 : 1; + unsigned int dmc_in0 : 1; + unsigned int dmc_out0 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int fifo_out0_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; +} reg_iop_sw_cpu_rw_intr2_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_intr2_mask 116 +#define REG_WR_ADDR_iop_sw_cpu_rw_intr2_mask 116 + +/* Register rw_ack_intr2, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int spu0_0 : 1; + unsigned int spu0_1 : 1; + unsigned int spu0_2 : 1; + unsigned int spu0_3 : 1; + unsigned int spu0_4 : 1; + unsigned int spu0_5 : 1; + unsigned int spu0_6 : 1; + unsigned int spu0_7 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cpu_rw_ack_intr2; +#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr2 120 +#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr2 120 + +/* Register r_intr2, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int spu0_0 : 1; + unsigned int spu0_1 : 1; + unsigned int spu0_2 : 1; + unsigned int spu0_3 : 1; + unsigned int spu0_4 : 1; + unsigned int spu0_5 : 1; + unsigned int spu0_6 : 1; + unsigned int spu0_7 : 1; + unsigned int dmc_in0 : 1; + unsigned int dmc_out0 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int fifo_out0_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; +} reg_iop_sw_cpu_r_intr2; +#define REG_RD_ADDR_iop_sw_cpu_r_intr2 124 + +/* Register r_masked_intr2, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int spu0_0 : 1; + unsigned int spu0_1 : 1; + unsigned int spu0_2 : 1; + unsigned int spu0_3 : 1; + unsigned int spu0_4 : 1; + unsigned int spu0_5 : 1; + unsigned int spu0_6 : 1; + unsigned int spu0_7 : 1; + unsigned int dmc_in0 : 1; + unsigned int dmc_out0 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int fifo_out0_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; +} reg_iop_sw_cpu_r_masked_intr2; +#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr2 128 + +/* Register rw_intr3_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int spu1_0 : 1; + unsigned int spu1_1 : 1; + unsigned int spu1_2 : 1; + unsigned int spu1_3 : 1; + unsigned int spu1_4 : 1; + unsigned int spu1_5 : 1; + unsigned int spu1_6 : 1; + unsigned int spu1_7 : 1; + unsigned int dmc_in1 : 1; + unsigned int dmc_out1 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int fifo_out1_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp2 : 1; + unsigned int timer_grp3 : 1; +} reg_iop_sw_cpu_rw_intr3_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_intr3_mask 132 +#define REG_WR_ADDR_iop_sw_cpu_rw_intr3_mask 132 + +/* Register rw_ack_intr3, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int spu1_0 : 1; + unsigned int spu1_1 : 1; + unsigned int spu1_2 : 1; + unsigned int spu1_3 : 1; + unsigned int spu1_4 : 1; + unsigned int spu1_5 : 1; + unsigned int spu1_6 : 1; + unsigned int spu1_7 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cpu_rw_ack_intr3; +#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr3 136 +#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr3 136 + +/* Register r_intr3, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int spu1_0 : 1; + unsigned int spu1_1 : 1; + unsigned int spu1_2 : 1; + unsigned int spu1_3 : 1; + unsigned int spu1_4 : 1; + unsigned int spu1_5 : 1; + unsigned int spu1_6 : 1; + unsigned int spu1_7 : 1; + unsigned int dmc_in1 : 1; + unsigned int dmc_out1 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int fifo_out1_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp2 : 1; + unsigned int timer_grp3 : 1; +} reg_iop_sw_cpu_r_intr3; +#define REG_RD_ADDR_iop_sw_cpu_r_intr3 140 + +/* Register r_masked_intr3, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int spu1_0 : 1; + unsigned int spu1_1 : 1; + unsigned int spu1_2 : 1; + unsigned int spu1_3 : 1; + unsigned int spu1_4 : 1; + unsigned int spu1_5 : 1; + unsigned int spu1_6 : 1; + unsigned int spu1_7 : 1; + unsigned int dmc_in1 : 1; + unsigned int dmc_out1 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int fifo_out1_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp2 : 1; + unsigned int timer_grp3 : 1; +} reg_iop_sw_cpu_r_masked_intr3; +#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr3 144 + + +/* Constants */ +enum { + regk_iop_sw_cpu_copy = 0x00000000, + regk_iop_sw_cpu_no = 0x00000000, + regk_iop_sw_cpu_rd = 0x00000002, + regk_iop_sw_cpu_reg_copy = 0x00000001, + regk_iop_sw_cpu_rw_bus0_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus0_oe_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus0_oe_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus0_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus1_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus1_oe_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus1_oe_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus1_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_oe_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_oe_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_intr0_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_intr1_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_intr2_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_intr3_mask_default = 0x00000000, + regk_iop_sw_cpu_wr = 0x00000003, + regk_iop_sw_cpu_yes = 0x00000001 +}; +#endif /* __iop_sw_cpu_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_mpu_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_mpu_defs.h new file mode 100644 index 000000000000..da718f2a8cad --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_mpu_defs.h @@ -0,0 +1,893 @@ +#ifndef __iop_sw_mpu_defs_h +#define __iop_sw_mpu_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r + * id: + * last modfied: Mon Apr 11 16:10:19 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_mpu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r + * id: $Id: iop_sw_mpu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_mpu */ + +/* Register rw_sw_cfg_owner, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_mpu_rw_sw_cfg_owner; +#define REG_RD_ADDR_iop_sw_mpu_rw_sw_cfg_owner 0 +#define REG_WR_ADDR_iop_sw_mpu_rw_sw_cfg_owner 0 + +/* Register rw_mc_ctrl, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int keep_owner : 1; + unsigned int cmd : 2; + unsigned int size : 3; + unsigned int wr_spu0_mem : 1; + unsigned int wr_spu1_mem : 1; + unsigned int dummy1 : 24; +} reg_iop_sw_mpu_rw_mc_ctrl; +#define REG_RD_ADDR_iop_sw_mpu_rw_mc_ctrl 4 +#define REG_WR_ADDR_iop_sw_mpu_rw_mc_ctrl 4 + +/* Register rw_mc_data, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_mc_data; +#define REG_RD_ADDR_iop_sw_mpu_rw_mc_data 8 +#define REG_WR_ADDR_iop_sw_mpu_rw_mc_data 8 + +/* Register rw_mc_addr, scope iop_sw_mpu, type rw */ +typedef unsigned int reg_iop_sw_mpu_rw_mc_addr; +#define REG_RD_ADDR_iop_sw_mpu_rw_mc_addr 12 +#define REG_WR_ADDR_iop_sw_mpu_rw_mc_addr 12 + +/* Register rs_mc_data, scope iop_sw_mpu, type rs */ +typedef unsigned int reg_iop_sw_mpu_rs_mc_data; +#define REG_RD_ADDR_iop_sw_mpu_rs_mc_data 16 + +/* Register r_mc_data, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_mc_data; +#define REG_RD_ADDR_iop_sw_mpu_r_mc_data 20 + +/* Register r_mc_stat, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int busy_cpu : 1; + unsigned int busy_mpu : 1; + unsigned int busy_spu0 : 1; + unsigned int busy_spu1 : 1; + unsigned int owned_by_cpu : 1; + unsigned int owned_by_mpu : 1; + unsigned int owned_by_spu0 : 1; + unsigned int owned_by_spu1 : 1; + unsigned int dummy1 : 24; +} reg_iop_sw_mpu_r_mc_stat; +#define REG_RD_ADDR_iop_sw_mpu_r_mc_stat 24 + +/* Register rw_bus0_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_mpu_rw_bus0_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus0_clr_mask 28 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus0_clr_mask 28 + +/* Register rw_bus0_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_mpu_rw_bus0_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus0_set_mask 32 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus0_set_mask 32 + +/* Register rw_bus0_oe_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_mpu_rw_bus0_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus0_oe_clr_mask 36 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus0_oe_clr_mask 36 + +/* Register rw_bus0_oe_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_mpu_rw_bus0_oe_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus0_oe_set_mask 40 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus0_oe_set_mask 40 + +/* Register r_bus0_in, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_bus0_in; +#define REG_RD_ADDR_iop_sw_mpu_r_bus0_in 44 + +/* Register rw_bus1_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_mpu_rw_bus1_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus1_clr_mask 48 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus1_clr_mask 48 + +/* Register rw_bus1_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_mpu_rw_bus1_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus1_set_mask 52 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus1_set_mask 52 + +/* Register rw_bus1_oe_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_mpu_rw_bus1_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus1_oe_clr_mask 56 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus1_oe_clr_mask 56 + +/* Register rw_bus1_oe_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_mpu_rw_bus1_oe_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus1_oe_set_mask 60 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus1_oe_set_mask 60 + +/* Register r_bus1_in, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_bus1_in; +#define REG_RD_ADDR_iop_sw_mpu_r_bus1_in 64 + +/* Register rw_gio_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_clr_mask 68 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_clr_mask 68 + +/* Register rw_gio_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_set_mask 72 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_set_mask 72 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_oe_clr_mask 76 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_oe_clr_mask 76 + +/* Register rw_gio_oe_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_oe_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_oe_set_mask 80 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_oe_set_mask 80 + +/* Register r_gio_in, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_gio_in; +#define REG_RD_ADDR_iop_sw_mpu_r_gio_in 84 + +/* Register rw_cpu_intr, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int intr16 : 1; + unsigned int intr17 : 1; + unsigned int intr18 : 1; + unsigned int intr19 : 1; + unsigned int intr20 : 1; + unsigned int intr21 : 1; + unsigned int intr22 : 1; + unsigned int intr23 : 1; + unsigned int intr24 : 1; + unsigned int intr25 : 1; + unsigned int intr26 : 1; + unsigned int intr27 : 1; + unsigned int intr28 : 1; + unsigned int intr29 : 1; + unsigned int intr30 : 1; + unsigned int intr31 : 1; +} reg_iop_sw_mpu_rw_cpu_intr; +#define REG_RD_ADDR_iop_sw_mpu_rw_cpu_intr 88 +#define REG_WR_ADDR_iop_sw_mpu_rw_cpu_intr 88 + +/* Register r_cpu_intr, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int intr16 : 1; + unsigned int intr17 : 1; + unsigned int intr18 : 1; + unsigned int intr19 : 1; + unsigned int intr20 : 1; + unsigned int intr21 : 1; + unsigned int intr22 : 1; + unsigned int intr23 : 1; + unsigned int intr24 : 1; + unsigned int intr25 : 1; + unsigned int intr26 : 1; + unsigned int intr27 : 1; + unsigned int intr28 : 1; + unsigned int intr29 : 1; + unsigned int intr30 : 1; + unsigned int intr31 : 1; +} reg_iop_sw_mpu_r_cpu_intr; +#define REG_RD_ADDR_iop_sw_mpu_r_cpu_intr 92 + +/* Register rw_intr_grp0_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu0_intr0 : 1; + unsigned int spu1_intr0 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr1 : 1; + unsigned int spu1_intr1 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr2 : 1; + unsigned int spu1_intr2 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr3 : 1; + unsigned int spu1_intr3 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_rw_intr_grp0_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp0_mask 96 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp0_mask 96 + +/* Register rw_ack_intr_grp0, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu0_intr0 : 1; + unsigned int spu1_intr0 : 1; + unsigned int dummy1 : 6; + unsigned int spu0_intr1 : 1; + unsigned int spu1_intr1 : 1; + unsigned int dummy2 : 6; + unsigned int spu0_intr2 : 1; + unsigned int spu1_intr2 : 1; + unsigned int dummy3 : 6; + unsigned int spu0_intr3 : 1; + unsigned int spu1_intr3 : 1; + unsigned int dummy4 : 6; +} reg_iop_sw_mpu_rw_ack_intr_grp0; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp0 100 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp0 100 + +/* Register r_intr_grp0, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu0_intr0 : 1; + unsigned int spu1_intr0 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr1 : 1; + unsigned int spu1_intr1 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr2 : 1; + unsigned int spu1_intr2 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr3 : 1; + unsigned int spu1_intr3 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_r_intr_grp0; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp0 104 + +/* Register r_masked_intr_grp0, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu0_intr0 : 1; + unsigned int spu1_intr0 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr1 : 1; + unsigned int spu1_intr1 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr2 : 1; + unsigned int spu1_intr2 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr3 : 1; + unsigned int spu1_intr3 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_r_masked_intr_grp0; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp0 108 + +/* Register rw_intr_grp1_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu0_intr4 : 1; + unsigned int spu1_intr4 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr5 : 1; + unsigned int spu1_intr5 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr6 : 1; + unsigned int spu1_intr6 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr7 : 1; + unsigned int spu1_intr7 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_rw_intr_grp1_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp1_mask 112 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp1_mask 112 + +/* Register rw_ack_intr_grp1, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu0_intr4 : 1; + unsigned int spu1_intr4 : 1; + unsigned int dummy1 : 6; + unsigned int spu0_intr5 : 1; + unsigned int spu1_intr5 : 1; + unsigned int dummy2 : 6; + unsigned int spu0_intr6 : 1; + unsigned int spu1_intr6 : 1; + unsigned int dummy3 : 6; + unsigned int spu0_intr7 : 1; + unsigned int spu1_intr7 : 1; + unsigned int dummy4 : 6; +} reg_iop_sw_mpu_rw_ack_intr_grp1; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp1 116 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp1 116 + +/* Register r_intr_grp1, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu0_intr4 : 1; + unsigned int spu1_intr4 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr5 : 1; + unsigned int spu1_intr5 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr6 : 1; + unsigned int spu1_intr6 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr7 : 1; + unsigned int spu1_intr7 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_r_intr_grp1; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp1 120 + +/* Register r_masked_intr_grp1, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu0_intr4 : 1; + unsigned int spu1_intr4 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr5 : 1; + unsigned int spu1_intr5 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr6 : 1; + unsigned int spu1_intr6 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr7 : 1; + unsigned int spu1_intr7 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_r_masked_intr_grp1; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp1 124 + +/* Register rw_intr_grp2_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu0_intr8 : 1; + unsigned int spu1_intr8 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr9 : 1; + unsigned int spu1_intr9 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr10 : 1; + unsigned int spu1_intr10 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr11 : 1; + unsigned int spu1_intr11 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_rw_intr_grp2_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp2_mask 128 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp2_mask 128 + +/* Register rw_ack_intr_grp2, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu0_intr8 : 1; + unsigned int spu1_intr8 : 1; + unsigned int dummy1 : 6; + unsigned int spu0_intr9 : 1; + unsigned int spu1_intr9 : 1; + unsigned int dummy2 : 6; + unsigned int spu0_intr10 : 1; + unsigned int spu1_intr10 : 1; + unsigned int dummy3 : 6; + unsigned int spu0_intr11 : 1; + unsigned int spu1_intr11 : 1; + unsigned int dummy4 : 6; +} reg_iop_sw_mpu_rw_ack_intr_grp2; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp2 132 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp2 132 + +/* Register r_intr_grp2, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu0_intr8 : 1; + unsigned int spu1_intr8 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr9 : 1; + unsigned int spu1_intr9 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr10 : 1; + unsigned int spu1_intr10 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr11 : 1; + unsigned int spu1_intr11 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_r_intr_grp2; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp2 136 + +/* Register r_masked_intr_grp2, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu0_intr8 : 1; + unsigned int spu1_intr8 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr9 : 1; + unsigned int spu1_intr9 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr10 : 1; + unsigned int spu1_intr10 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr11 : 1; + unsigned int spu1_intr11 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_r_masked_intr_grp2; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp2 140 + +/* Register rw_intr_grp3_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu0_intr12 : 1; + unsigned int spu1_intr12 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr13 : 1; + unsigned int spu1_intr13 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr14 : 1; + unsigned int spu1_intr14 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr15 : 1; + unsigned int spu1_intr15 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_rw_intr_grp3_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp3_mask 144 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp3_mask 144 + +/* Register rw_ack_intr_grp3, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu0_intr12 : 1; + unsigned int spu1_intr12 : 1; + unsigned int dummy1 : 6; + unsigned int spu0_intr13 : 1; + unsigned int spu1_intr13 : 1; + unsigned int dummy2 : 6; + unsigned int spu0_intr14 : 1; + unsigned int spu1_intr14 : 1; + unsigned int dummy3 : 6; + unsigned int spu0_intr15 : 1; + unsigned int spu1_intr15 : 1; + unsigned int dummy4 : 6; +} reg_iop_sw_mpu_rw_ack_intr_grp3; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp3 148 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp3 148 + +/* Register r_intr_grp3, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu0_intr12 : 1; + unsigned int spu1_intr12 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr13 : 1; + unsigned int spu1_intr13 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr14 : 1; + unsigned int spu1_intr14 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr15 : 1; + unsigned int spu1_intr15 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_r_intr_grp3; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp3 152 + +/* Register r_masked_intr_grp3, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu0_intr12 : 1; + unsigned int spu1_intr12 : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int spu0_intr13 : 1; + unsigned int spu1_intr13 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp4 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int dmc_in0 : 1; + unsigned int spu0_intr14 : 1; + unsigned int spu1_intr14 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp5 : 1; + unsigned int timer_grp2 : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int dmc_out1 : 1; + unsigned int spu0_intr15 : 1; + unsigned int spu1_intr15 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int dmc_in1 : 1; +} reg_iop_sw_mpu_r_masked_intr_grp3; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp3 156 + + +/* Constants */ +enum { + regk_iop_sw_mpu_copy = 0x00000000, + regk_iop_sw_mpu_cpu = 0x00000000, + regk_iop_sw_mpu_mpu = 0x00000001, + regk_iop_sw_mpu_no = 0x00000000, + regk_iop_sw_mpu_nop = 0x00000000, + regk_iop_sw_mpu_rd = 0x00000002, + regk_iop_sw_mpu_reg_copy = 0x00000001, + regk_iop_sw_mpu_rw_bus0_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus0_oe_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus0_oe_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus0_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus1_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus1_oe_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus1_oe_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus1_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_oe_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_oe_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp0_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp1_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp2_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp3_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_sw_cfg_owner_default = 0x00000000, + regk_iop_sw_mpu_set = 0x00000001, + regk_iop_sw_mpu_spu0 = 0x00000002, + regk_iop_sw_mpu_spu1 = 0x00000003, + regk_iop_sw_mpu_wr = 0x00000003, + regk_iop_sw_mpu_yes = 0x00000001 +}; +#endif /* __iop_sw_mpu_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_spu_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_spu_defs.h new file mode 100644 index 000000000000..b59dde4bd0d1 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_sw_spu_defs.h @@ -0,0 +1,552 @@ +#ifndef __iop_sw_spu_defs_h +#define __iop_sw_spu_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_sw_spu.r + * id: + * last modfied: Mon Apr 11 16:10:19 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_spu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_spu.r + * id: $Id: iop_sw_spu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_spu */ + +/* Register rw_mc_ctrl, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int keep_owner : 1; + unsigned int cmd : 2; + unsigned int size : 3; + unsigned int wr_spu0_mem : 1; + unsigned int wr_spu1_mem : 1; + unsigned int dummy1 : 24; +} reg_iop_sw_spu_rw_mc_ctrl; +#define REG_RD_ADDR_iop_sw_spu_rw_mc_ctrl 0 +#define REG_WR_ADDR_iop_sw_spu_rw_mc_ctrl 0 + +/* Register rw_mc_data, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_mc_data; +#define REG_RD_ADDR_iop_sw_spu_rw_mc_data 4 +#define REG_WR_ADDR_iop_sw_spu_rw_mc_data 4 + +/* Register rw_mc_addr, scope iop_sw_spu, type rw */ +typedef unsigned int reg_iop_sw_spu_rw_mc_addr; +#define REG_RD_ADDR_iop_sw_spu_rw_mc_addr 8 +#define REG_WR_ADDR_iop_sw_spu_rw_mc_addr 8 + +/* Register rs_mc_data, scope iop_sw_spu, type rs */ +typedef unsigned int reg_iop_sw_spu_rs_mc_data; +#define REG_RD_ADDR_iop_sw_spu_rs_mc_data 12 + +/* Register r_mc_data, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_mc_data; +#define REG_RD_ADDR_iop_sw_spu_r_mc_data 16 + +/* Register r_mc_stat, scope iop_sw_spu, type r */ +typedef struct { + unsigned int busy_cpu : 1; + unsigned int busy_mpu : 1; + unsigned int busy_spu0 : 1; + unsigned int busy_spu1 : 1; + unsigned int owned_by_cpu : 1; + unsigned int owned_by_mpu : 1; + unsigned int owned_by_spu0 : 1; + unsigned int owned_by_spu1 : 1; + unsigned int dummy1 : 24; +} reg_iop_sw_spu_r_mc_stat; +#define REG_RD_ADDR_iop_sw_spu_r_mc_stat 20 + +/* Register rw_bus0_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_spu_rw_bus0_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus0_clr_mask 24 +#define REG_WR_ADDR_iop_sw_spu_rw_bus0_clr_mask 24 + +/* Register rw_bus0_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_spu_rw_bus0_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus0_set_mask 28 +#define REG_WR_ADDR_iop_sw_spu_rw_bus0_set_mask 28 + +/* Register rw_bus0_oe_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_spu_rw_bus0_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus0_oe_clr_mask 32 +#define REG_WR_ADDR_iop_sw_spu_rw_bus0_oe_clr_mask 32 + +/* Register rw_bus0_oe_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_spu_rw_bus0_oe_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus0_oe_set_mask 36 +#define REG_WR_ADDR_iop_sw_spu_rw_bus0_oe_set_mask 36 + +/* Register r_bus0_in, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_bus0_in; +#define REG_RD_ADDR_iop_sw_spu_r_bus0_in 40 + +/* Register rw_bus1_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_spu_rw_bus1_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus1_clr_mask 44 +#define REG_WR_ADDR_iop_sw_spu_rw_bus1_clr_mask 44 + +/* Register rw_bus1_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_spu_rw_bus1_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus1_set_mask 48 +#define REG_WR_ADDR_iop_sw_spu_rw_bus1_set_mask 48 + +/* Register rw_bus1_oe_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_spu_rw_bus1_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus1_oe_clr_mask 52 +#define REG_WR_ADDR_iop_sw_spu_rw_bus1_oe_clr_mask 52 + +/* Register rw_bus1_oe_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_spu_rw_bus1_oe_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus1_oe_set_mask 56 +#define REG_WR_ADDR_iop_sw_spu_rw_bus1_oe_set_mask 56 + +/* Register r_bus1_in, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_bus1_in; +#define REG_RD_ADDR_iop_sw_spu_r_bus1_in 60 + +/* Register rw_gio_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask 64 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask 64 + +/* Register rw_gio_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask 68 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask 68 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask 72 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask 72 + +/* Register rw_gio_oe_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_oe_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask 76 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask 76 + +/* Register r_gio_in, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_gio_in; +#define REG_RD_ADDR_iop_sw_spu_r_gio_in 80 + +/* Register rw_bus0_clr_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus0_clr_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_bus0_clr_mask_lo 84 +#define REG_WR_ADDR_iop_sw_spu_rw_bus0_clr_mask_lo 84 + +/* Register rw_bus0_clr_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte2 : 8; + unsigned int byte3 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus0_clr_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_bus0_clr_mask_hi 88 +#define REG_WR_ADDR_iop_sw_spu_rw_bus0_clr_mask_hi 88 + +/* Register rw_bus0_set_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus0_set_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_bus0_set_mask_lo 92 +#define REG_WR_ADDR_iop_sw_spu_rw_bus0_set_mask_lo 92 + +/* Register rw_bus0_set_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte2 : 8; + unsigned int byte3 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus0_set_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_bus0_set_mask_hi 96 +#define REG_WR_ADDR_iop_sw_spu_rw_bus0_set_mask_hi 96 + +/* Register rw_bus1_clr_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus1_clr_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_bus1_clr_mask_lo 100 +#define REG_WR_ADDR_iop_sw_spu_rw_bus1_clr_mask_lo 100 + +/* Register rw_bus1_clr_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte2 : 8; + unsigned int byte3 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus1_clr_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_bus1_clr_mask_hi 104 +#define REG_WR_ADDR_iop_sw_spu_rw_bus1_clr_mask_hi 104 + +/* Register rw_bus1_set_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus1_set_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_bus1_set_mask_lo 108 +#define REG_WR_ADDR_iop_sw_spu_rw_bus1_set_mask_lo 108 + +/* Register rw_bus1_set_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte2 : 8; + unsigned int byte3 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus1_set_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_bus1_set_mask_hi 112 +#define REG_WR_ADDR_iop_sw_spu_rw_bus1_set_mask_hi 112 + +/* Register rw_gio_clr_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_clr_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask_lo 116 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask_lo 116 + +/* Register rw_gio_clr_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_clr_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask_hi 120 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask_hi 120 + +/* Register rw_gio_set_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_set_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask_lo 124 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask_lo 124 + +/* Register rw_gio_set_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_set_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask_hi 128 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask_hi 128 + +/* Register rw_gio_oe_clr_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_clr_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_lo 132 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_lo 132 + +/* Register rw_gio_oe_clr_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_clr_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_hi 136 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_hi 136 + +/* Register rw_gio_oe_set_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_set_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask_lo 140 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask_lo 140 + +/* Register rw_gio_oe_set_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_set_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask_hi 144 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask_hi 144 + +/* Register rw_cpu_intr, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_cpu_intr; +#define REG_RD_ADDR_iop_sw_spu_rw_cpu_intr 148 +#define REG_WR_ADDR_iop_sw_spu_rw_cpu_intr 148 + +/* Register r_cpu_intr, scope iop_sw_spu, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_r_cpu_intr; +#define REG_RD_ADDR_iop_sw_spu_r_cpu_intr 152 + +/* Register r_hw_intr, scope iop_sw_spu, type r */ +typedef struct { + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; + unsigned int timer_grp2 : 1; + unsigned int timer_grp3 : 1; + unsigned int fifo_out0 : 1; + unsigned int fifo_out0_extra : 1; + unsigned int fifo_in0 : 1; + unsigned int fifo_in0_extra : 1; + unsigned int fifo_out1 : 1; + unsigned int fifo_out1_extra : 1; + unsigned int fifo_in1 : 1; + unsigned int fifo_in1_extra : 1; + unsigned int dmc_out0 : 1; + unsigned int dmc_in0 : 1; + unsigned int dmc_out1 : 1; + unsigned int dmc_in1 : 1; + unsigned int dummy1 : 8; +} reg_iop_sw_spu_r_hw_intr; +#define REG_RD_ADDR_iop_sw_spu_r_hw_intr 156 + +/* Register rw_mpu_intr, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_mpu_intr; +#define REG_RD_ADDR_iop_sw_spu_rw_mpu_intr 160 +#define REG_WR_ADDR_iop_sw_spu_rw_mpu_intr 160 + +/* Register r_mpu_intr, scope iop_sw_spu, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int other_spu_intr0 : 1; + unsigned int other_spu_intr1 : 1; + unsigned int other_spu_intr2 : 1; + unsigned int other_spu_intr3 : 1; + unsigned int other_spu_intr4 : 1; + unsigned int other_spu_intr5 : 1; + unsigned int other_spu_intr6 : 1; + unsigned int other_spu_intr7 : 1; + unsigned int other_spu_intr8 : 1; + unsigned int other_spu_intr9 : 1; + unsigned int other_spu_intr10 : 1; + unsigned int other_spu_intr11 : 1; + unsigned int other_spu_intr12 : 1; + unsigned int other_spu_intr13 : 1; + unsigned int other_spu_intr14 : 1; + unsigned int other_spu_intr15 : 1; +} reg_iop_sw_spu_r_mpu_intr; +#define REG_RD_ADDR_iop_sw_spu_r_mpu_intr 164 + + +/* Constants */ +enum { + regk_iop_sw_spu_copy = 0x00000000, + regk_iop_sw_spu_no = 0x00000000, + regk_iop_sw_spu_nop = 0x00000000, + regk_iop_sw_spu_rd = 0x00000002, + regk_iop_sw_spu_reg_copy = 0x00000001, + regk_iop_sw_spu_rw_bus0_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus0_oe_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus0_oe_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus0_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus1_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus1_oe_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus1_oe_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus1_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_oe_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_oe_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_set_mask_default = 0x00000000, + regk_iop_sw_spu_set = 0x00000001, + regk_iop_sw_spu_wr = 0x00000003, + regk_iop_sw_spu_yes = 0x00000001 +}; +#endif /* __iop_sw_spu_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_timer_grp_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_timer_grp_defs.h new file mode 100644 index 000000000000..c994114f3b51 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_timer_grp_defs.h @@ -0,0 +1,249 @@ +#ifndef __iop_timer_grp_defs_h +#define __iop_timer_grp_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_timer_grp.r + * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_timer_grp_defs.h ../../inst/io_proc/rtl/iop_timer_grp.r + * id: $Id: iop_timer_grp_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_timer_grp */ + +/* Register rw_cfg, scope iop_timer_grp, type rw */ +typedef struct { + unsigned int clk_src : 1; + unsigned int trig : 2; + unsigned int clk_gen_div : 8; + unsigned int clk_div : 8; + unsigned int dummy1 : 13; +} reg_iop_timer_grp_rw_cfg; +#define REG_RD_ADDR_iop_timer_grp_rw_cfg 0 +#define REG_WR_ADDR_iop_timer_grp_rw_cfg 0 + +/* Register rw_half_period, scope iop_timer_grp, type rw */ +typedef struct { + unsigned int quota_lo : 15; + unsigned int quota_hi : 15; + unsigned int quota_hi_sel : 1; + unsigned int dummy1 : 1; +} reg_iop_timer_grp_rw_half_period; +#define REG_RD_ADDR_iop_timer_grp_rw_half_period 4 +#define REG_WR_ADDR_iop_timer_grp_rw_half_period 4 + +/* Register rw_half_period_len, scope iop_timer_grp, type rw */ +typedef unsigned int reg_iop_timer_grp_rw_half_period_len; +#define REG_RD_ADDR_iop_timer_grp_rw_half_period_len 8 +#define REG_WR_ADDR_iop_timer_grp_rw_half_period_len 8 + +#define STRIDE_iop_timer_grp_rw_tmr_cfg 4 +/* Register rw_tmr_cfg, scope iop_timer_grp, type rw */ +typedef struct { + unsigned int clk_src : 3; + unsigned int strb : 2; + unsigned int run_mode : 2; + unsigned int out_mode : 1; + unsigned int active_on_tmr : 2; + unsigned int inv : 1; + unsigned int en_by_tmr : 2; + unsigned int dis_by_tmr : 2; + unsigned int en_only_by_reg : 1; + unsigned int dis_only_by_reg : 1; + unsigned int rst_at_en_strb : 1; + unsigned int dummy1 : 14; +} reg_iop_timer_grp_rw_tmr_cfg; +#define REG_RD_ADDR_iop_timer_grp_rw_tmr_cfg 12 +#define REG_WR_ADDR_iop_timer_grp_rw_tmr_cfg 12 + +#define STRIDE_iop_timer_grp_rw_tmr_len 4 +/* Register rw_tmr_len, scope iop_timer_grp, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_timer_grp_rw_tmr_len; +#define REG_RD_ADDR_iop_timer_grp_rw_tmr_len 44 +#define REG_WR_ADDR_iop_timer_grp_rw_tmr_len 44 + +/* Register rw_cmd, scope iop_timer_grp, type rw */ +typedef struct { + unsigned int rst : 4; + unsigned int en : 4; + unsigned int dis : 4; + unsigned int strb : 4; + unsigned int dummy1 : 16; +} reg_iop_timer_grp_rw_cmd; +#define REG_RD_ADDR_iop_timer_grp_rw_cmd 60 +#define REG_WR_ADDR_iop_timer_grp_rw_cmd 60 + +/* Register r_clk_gen_cnt, scope iop_timer_grp, type r */ +typedef unsigned int reg_iop_timer_grp_r_clk_gen_cnt; +#define REG_RD_ADDR_iop_timer_grp_r_clk_gen_cnt 64 + +#define STRIDE_iop_timer_grp_rs_tmr_cnt 8 +/* Register rs_tmr_cnt, scope iop_timer_grp, type rs */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_timer_grp_rs_tmr_cnt; +#define REG_RD_ADDR_iop_timer_grp_rs_tmr_cnt 68 + +#define STRIDE_iop_timer_grp_r_tmr_cnt 8 +/* Register r_tmr_cnt, scope iop_timer_grp, type r */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_timer_grp_r_tmr_cnt; +#define REG_RD_ADDR_iop_timer_grp_r_tmr_cnt 72 + +/* Register rw_intr_mask, scope iop_timer_grp, type rw */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int tmr2 : 1; + unsigned int tmr3 : 1; + unsigned int dummy1 : 28; +} reg_iop_timer_grp_rw_intr_mask; +#define REG_RD_ADDR_iop_timer_grp_rw_intr_mask 100 +#define REG_WR_ADDR_iop_timer_grp_rw_intr_mask 100 + +/* Register rw_ack_intr, scope iop_timer_grp, type rw */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int tmr2 : 1; + unsigned int tmr3 : 1; + unsigned int dummy1 : 28; +} reg_iop_timer_grp_rw_ack_intr; +#define REG_RD_ADDR_iop_timer_grp_rw_ack_intr 104 +#define REG_WR_ADDR_iop_timer_grp_rw_ack_intr 104 + +/* Register r_intr, scope iop_timer_grp, type r */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int tmr2 : 1; + unsigned int tmr3 : 1; + unsigned int dummy1 : 28; +} reg_iop_timer_grp_r_intr; +#define REG_RD_ADDR_iop_timer_grp_r_intr 108 + +/* Register r_masked_intr, scope iop_timer_grp, type r */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int tmr2 : 1; + unsigned int tmr3 : 1; + unsigned int dummy1 : 28; +} reg_iop_timer_grp_r_masked_intr; +#define REG_RD_ADDR_iop_timer_grp_r_masked_intr 112 + + +/* Constants */ +enum { + regk_iop_timer_grp_clk200 = 0x00000000, + regk_iop_timer_grp_clk_gen = 0x00000002, + regk_iop_timer_grp_complete = 0x00000002, + regk_iop_timer_grp_div_clk200 = 0x00000001, + regk_iop_timer_grp_div_clk_gen = 0x00000003, + regk_iop_timer_grp_ext = 0x00000001, + regk_iop_timer_grp_hi = 0x00000000, + regk_iop_timer_grp_long_period = 0x00000001, + regk_iop_timer_grp_neg = 0x00000002, + regk_iop_timer_grp_no = 0x00000000, + regk_iop_timer_grp_once = 0x00000003, + regk_iop_timer_grp_pause = 0x00000001, + regk_iop_timer_grp_pos = 0x00000001, + regk_iop_timer_grp_pos_neg = 0x00000003, + regk_iop_timer_grp_pulse = 0x00000000, + regk_iop_timer_grp_r_tmr_cnt_size = 0x00000004, + regk_iop_timer_grp_rs_tmr_cnt_size = 0x00000004, + regk_iop_timer_grp_rw_cfg_default = 0x00000002, + regk_iop_timer_grp_rw_intr_mask_default = 0x00000000, + regk_iop_timer_grp_rw_tmr_cfg_default0 = 0x00018000, + regk_iop_timer_grp_rw_tmr_cfg_default1 = 0x0001a900, + regk_iop_timer_grp_rw_tmr_cfg_default2 = 0x0001d200, + regk_iop_timer_grp_rw_tmr_cfg_default3 = 0x0001fb00, + regk_iop_timer_grp_rw_tmr_cfg_size = 0x00000004, + regk_iop_timer_grp_rw_tmr_len_default = 0x00000000, + regk_iop_timer_grp_rw_tmr_len_size = 0x00000004, + regk_iop_timer_grp_short_period = 0x00000000, + regk_iop_timer_grp_stop = 0x00000000, + regk_iop_timer_grp_tmr = 0x00000004, + regk_iop_timer_grp_toggle = 0x00000001, + regk_iop_timer_grp_yes = 0x00000001 +}; +#endif /* __iop_timer_grp_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_trigger_grp_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_trigger_grp_defs.h new file mode 100644 index 000000000000..36e44282399d --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_trigger_grp_defs.h @@ -0,0 +1,170 @@ +#ifndef __iop_trigger_grp_defs_h +#define __iop_trigger_grp_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_trigger_grp.r + * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_trigger_grp_defs.h ../../inst/io_proc/rtl/iop_trigger_grp.r + * id: $Id: iop_trigger_grp_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_trigger_grp */ + +#define STRIDE_iop_trigger_grp_rw_cfg 4 +/* Register rw_cfg, scope iop_trigger_grp, type rw */ +typedef struct { + unsigned int action : 2; + unsigned int once : 1; + unsigned int trig : 3; + unsigned int en_only_by_reg : 1; + unsigned int dis_only_by_reg : 1; + unsigned int dummy1 : 24; +} reg_iop_trigger_grp_rw_cfg; +#define REG_RD_ADDR_iop_trigger_grp_rw_cfg 0 +#define REG_WR_ADDR_iop_trigger_grp_rw_cfg 0 + +/* Register rw_cmd, scope iop_trigger_grp, type rw */ +typedef struct { + unsigned int dis : 4; + unsigned int en : 4; + unsigned int dummy1 : 24; +} reg_iop_trigger_grp_rw_cmd; +#define REG_RD_ADDR_iop_trigger_grp_rw_cmd 16 +#define REG_WR_ADDR_iop_trigger_grp_rw_cmd 16 + +/* Register rw_intr_mask, scope iop_trigger_grp, type rw */ +typedef struct { + unsigned int trig0 : 1; + unsigned int trig1 : 1; + unsigned int trig2 : 1; + unsigned int trig3 : 1; + unsigned int dummy1 : 28; +} reg_iop_trigger_grp_rw_intr_mask; +#define REG_RD_ADDR_iop_trigger_grp_rw_intr_mask 20 +#define REG_WR_ADDR_iop_trigger_grp_rw_intr_mask 20 + +/* Register rw_ack_intr, scope iop_trigger_grp, type rw */ +typedef struct { + unsigned int trig0 : 1; + unsigned int trig1 : 1; + unsigned int trig2 : 1; + unsigned int trig3 : 1; + unsigned int dummy1 : 28; +} reg_iop_trigger_grp_rw_ack_intr; +#define REG_RD_ADDR_iop_trigger_grp_rw_ack_intr 24 +#define REG_WR_ADDR_iop_trigger_grp_rw_ack_intr 24 + +/* Register r_intr, scope iop_trigger_grp, type r */ +typedef struct { + unsigned int trig0 : 1; + unsigned int trig1 : 1; + unsigned int trig2 : 1; + unsigned int trig3 : 1; + unsigned int dummy1 : 28; +} reg_iop_trigger_grp_r_intr; +#define REG_RD_ADDR_iop_trigger_grp_r_intr 28 + +/* Register r_masked_intr, scope iop_trigger_grp, type r */ +typedef struct { + unsigned int trig0 : 1; + unsigned int trig1 : 1; + unsigned int trig2 : 1; + unsigned int trig3 : 1; + unsigned int dummy1 : 28; +} reg_iop_trigger_grp_r_masked_intr; +#define REG_RD_ADDR_iop_trigger_grp_r_masked_intr 32 + + +/* Constants */ +enum { + regk_iop_trigger_grp_fall = 0x00000002, + regk_iop_trigger_grp_fall_lo = 0x00000006, + regk_iop_trigger_grp_no = 0x00000000, + regk_iop_trigger_grp_off = 0x00000000, + regk_iop_trigger_grp_pulse = 0x00000000, + regk_iop_trigger_grp_rise = 0x00000001, + regk_iop_trigger_grp_rise_fall = 0x00000003, + regk_iop_trigger_grp_rise_fall_hi = 0x00000007, + regk_iop_trigger_grp_rise_fall_lo = 0x00000004, + regk_iop_trigger_grp_rise_hi = 0x00000005, + regk_iop_trigger_grp_rw_cfg_default = 0x000000c0, + regk_iop_trigger_grp_rw_cfg_size = 0x00000004, + regk_iop_trigger_grp_rw_intr_mask_default = 0x00000000, + regk_iop_trigger_grp_toggle = 0x00000003, + regk_iop_trigger_grp_yes = 0x00000001 +}; +#endif /* __iop_trigger_grp_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/iop_version_defs.h b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_version_defs.h new file mode 100644 index 000000000000..b8d6a910c71c --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/iop_version_defs.h @@ -0,0 +1,99 @@ +#ifndef __iop_version_defs_h +#define __iop_version_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_version.r + * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp + * last modfied: Mon Apr 11 16:08:44 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_version_defs.h ../../inst/io_proc/rtl/guinness/iop_version.r + * id: $Id: iop_version_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_version */ + +/* Register r_version, scope iop_version, type r */ +typedef struct { + unsigned int nr : 8; + unsigned int dummy1 : 24; +} reg_iop_version_r_version; +#define REG_RD_ADDR_iop_version_r_version 0 + + +/* Constants */ +enum { + regk_iop_version_v1_0 = 0x00000001 +}; +#endif /* __iop_version_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/irq_nmi_defs.h b/arch/cris/include/arch-v32/arch/hwregs/irq_nmi_defs.h new file mode 100644 index 000000000000..7b167e3c0572 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/irq_nmi_defs.h @@ -0,0 +1,104 @@ +#ifndef __irq_nmi_defs_h +#define __irq_nmi_defs_h + +/* + * This file is autogenerated from + * file: ../../mod/irq_nmi.r + * id: + * last modfied: Thu Jan 22 09:22:43 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile irq_nmi_defs.h ../../mod/irq_nmi.r + * id: $Id: irq_nmi_defs.h,v 1.1 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope irq_nmi */ + +/* Register rw_cmd, scope irq_nmi, type rw */ +typedef struct { + unsigned int delay : 16; + unsigned int op : 2; + unsigned int dummy1 : 14; +} reg_irq_nmi_rw_cmd; +#define REG_RD_ADDR_irq_nmi_rw_cmd 0 +#define REG_WR_ADDR_irq_nmi_rw_cmd 0 + + +/* Constants */ +enum { + regk_irq_nmi_ack_irq = 0x00000002, + regk_irq_nmi_ack_nmi = 0x00000003, + regk_irq_nmi_irq = 0x00000000, + regk_irq_nmi_nmi = 0x00000001 +}; +#endif /* __irq_nmi_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/marb_bp_defs.h b/arch/cris/include/arch-v32/arch/hwregs/marb_bp_defs.h new file mode 100644 index 000000000000..a11fdd3cd907 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/marb_bp_defs.h @@ -0,0 +1,205 @@ +#ifndef __marb_bp_defs_h +#define __marb_bp_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: + * last modfied: Fri Nov 7 15:36:04 2003 + * + * by /n/asic/projects/guinness/design/top/inst/rdesc/rdes2c ../../rtl/global.rmap ../../mod/modreg.rmap -base 0xb0000000 ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_bp_defs.h,v 1.2 2004/06/04 07:15:33 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +/* C-code for register scope marb_bp */ + +/* Register rw_first_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_first_addr; +#define REG_RD_ADDR_marb_bp_rw_first_addr 0 +#define REG_WR_ADDR_marb_bp_rw_first_addr 0 + +/* Register rw_last_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_last_addr; +#define REG_RD_ADDR_marb_bp_rw_last_addr 4 +#define REG_WR_ADDR_marb_bp_rw_last_addr 4 + +/* Register rw_op, scope marb_bp, type rw */ +typedef struct { + unsigned int read : 1; + unsigned int write : 1; + unsigned int read_excl : 1; + unsigned int pri_write : 1; + unsigned int us_read : 1; + unsigned int us_write : 1; + unsigned int us_read_excl : 1; + unsigned int us_pri_write : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_rw_op; +#define REG_RD_ADDR_marb_bp_rw_op 8 +#define REG_WR_ADDR_marb_bp_rw_op 8 + +/* Register rw_clients, scope marb_bp, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_rw_clients; +#define REG_RD_ADDR_marb_bp_rw_clients 12 +#define REG_WR_ADDR_marb_bp_rw_clients 12 + +/* Register rw_options, scope marb_bp, type rw */ +typedef struct { + unsigned int wrap : 1; + unsigned int dummy1 : 31; +} reg_marb_bp_rw_options; +#define REG_RD_ADDR_marb_bp_rw_options 16 +#define REG_WR_ADDR_marb_bp_rw_options 16 + +/* Register r_break_addr, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_break_addr; +#define REG_RD_ADDR_marb_bp_r_break_addr 20 + +/* Register r_break_op, scope marb_bp, type r */ +typedef struct { + unsigned int read : 1; + unsigned int write : 1; + unsigned int read_excl : 1; + unsigned int pri_write : 1; + unsigned int us_read : 1; + unsigned int us_write : 1; + unsigned int us_read_excl : 1; + unsigned int us_pri_write : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_r_break_op; +#define REG_RD_ADDR_marb_bp_r_break_op 24 + +/* Register r_break_clients, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_break_clients; +#define REG_RD_ADDR_marb_bp_r_break_clients 28 + +/* Register r_break_first_client, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_break_first_client; +#define REG_RD_ADDR_marb_bp_r_break_first_client 32 + +/* Register r_break_size, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_break_size; +#define REG_RD_ADDR_marb_bp_r_break_size 36 + +/* Register rw_ack, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_ack; +#define REG_RD_ADDR_marb_bp_rw_ack 40 +#define REG_WR_ADDR_marb_bp_rw_ack 40 + + +/* Constants */ +enum { + regk_marb_bp_no = 0x00000000, + regk_marb_bp_rw_op_default = 0x00000000, + regk_marb_bp_rw_options_default = 0x00000000, + regk_marb_bp_yes = 0x00000001 +}; +#endif /* __marb_bp_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/marb_defs.h b/arch/cris/include/arch-v32/arch/hwregs/marb_defs.h new file mode 100644 index 000000000000..71e8af0bb3a4 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/marb_defs.h @@ -0,0 +1,475 @@ +#ifndef __marb_defs_h +#define __marb_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: + * last modfied: Mon Apr 11 16:12:16 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb */ + +#define STRIDE_marb_rw_int_slots 4 +/* Register rw_int_slots, scope marb, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_rw_int_slots; +#define REG_RD_ADDR_marb_rw_int_slots 0 +#define REG_WR_ADDR_marb_rw_int_slots 0 + +#define STRIDE_marb_rw_ext_slots 4 +/* Register rw_ext_slots, scope marb, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_rw_ext_slots; +#define REG_RD_ADDR_marb_rw_ext_slots 256 +#define REG_WR_ADDR_marb_rw_ext_slots 256 + +#define STRIDE_marb_rw_regs_slots 4 +/* Register rw_regs_slots, scope marb, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_rw_regs_slots; +#define REG_RD_ADDR_marb_rw_regs_slots 512 +#define REG_WR_ADDR_marb_rw_regs_slots 512 + +/* Register rw_intr_mask, scope marb, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_rw_intr_mask; +#define REG_RD_ADDR_marb_rw_intr_mask 528 +#define REG_WR_ADDR_marb_rw_intr_mask 528 + +/* Register rw_ack_intr, scope marb, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_rw_ack_intr; +#define REG_RD_ADDR_marb_rw_ack_intr 532 +#define REG_WR_ADDR_marb_rw_ack_intr 532 + +/* Register r_intr, scope marb, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_r_intr; +#define REG_RD_ADDR_marb_r_intr 536 + +/* Register r_masked_intr, scope marb, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_r_masked_intr; +#define REG_RD_ADDR_marb_r_masked_intr 540 + +/* Register rw_stop_mask, scope marb, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_rw_stop_mask; +#define REG_RD_ADDR_marb_rw_stop_mask 544 +#define REG_WR_ADDR_marb_rw_stop_mask 544 + +/* Register r_stopped, scope marb, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_r_stopped; +#define REG_RD_ADDR_marb_r_stopped 548 + +/* Register rw_no_snoop, scope marb, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_rw_no_snoop; +#define REG_RD_ADDR_marb_rw_no_snoop 832 +#define REG_WR_ADDR_marb_rw_no_snoop 832 + +/* Register rw_no_snoop_rq, scope marb, type rw */ +typedef struct { + unsigned int dummy1 : 10; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int dummy2 : 20; +} reg_marb_rw_no_snoop_rq; +#define REG_RD_ADDR_marb_rw_no_snoop_rq 836 +#define REG_WR_ADDR_marb_rw_no_snoop_rq 836 + + +/* Constants */ +enum { + regk_marb_cpud = 0x0000000b, + regk_marb_cpui = 0x0000000a, + regk_marb_dma0 = 0x00000000, + regk_marb_dma1 = 0x00000001, + regk_marb_dma2 = 0x00000002, + regk_marb_dma3 = 0x00000003, + regk_marb_dma4 = 0x00000004, + regk_marb_dma5 = 0x00000005, + regk_marb_dma6 = 0x00000006, + regk_marb_dma7 = 0x00000007, + regk_marb_dma8 = 0x00000008, + regk_marb_dma9 = 0x00000009, + regk_marb_iop = 0x0000000c, + regk_marb_no = 0x00000000, + regk_marb_r_stopped_default = 0x00000000, + regk_marb_rw_ext_slots_default = 0x00000000, + regk_marb_rw_ext_slots_size = 0x00000040, + regk_marb_rw_int_slots_default = 0x00000000, + regk_marb_rw_int_slots_size = 0x00000040, + regk_marb_rw_intr_mask_default = 0x00000000, + regk_marb_rw_no_snoop_default = 0x00000000, + regk_marb_rw_no_snoop_rq_default = 0x00000000, + regk_marb_rw_regs_slots_default = 0x00000000, + regk_marb_rw_regs_slots_size = 0x00000004, + regk_marb_rw_stop_mask_default = 0x00000000, + regk_marb_slave = 0x0000000d, + regk_marb_yes = 0x00000001 +}; +#endif /* __marb_defs_h */ +#ifndef __marb_bp_defs_h +#define __marb_bp_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: + * last modfied: Mon Apr 11 16:12:16 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_bp */ + +/* Register rw_first_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_first_addr; +#define REG_RD_ADDR_marb_bp_rw_first_addr 0 +#define REG_WR_ADDR_marb_bp_rw_first_addr 0 + +/* Register rw_last_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_last_addr; +#define REG_RD_ADDR_marb_bp_rw_last_addr 4 +#define REG_WR_ADDR_marb_bp_rw_last_addr 4 + +/* Register rw_op, scope marb_bp, type rw */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_rw_op; +#define REG_RD_ADDR_marb_bp_rw_op 8 +#define REG_WR_ADDR_marb_bp_rw_op 8 + +/* Register rw_clients, scope marb_bp, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_rw_clients; +#define REG_RD_ADDR_marb_bp_rw_clients 12 +#define REG_WR_ADDR_marb_bp_rw_clients 12 + +/* Register rw_options, scope marb_bp, type rw */ +typedef struct { + unsigned int wrap : 1; + unsigned int dummy1 : 31; +} reg_marb_bp_rw_options; +#define REG_RD_ADDR_marb_bp_rw_options 16 +#define REG_WR_ADDR_marb_bp_rw_options 16 + +/* Register r_brk_addr, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_brk_addr; +#define REG_RD_ADDR_marb_bp_r_brk_addr 20 + +/* Register r_brk_op, scope marb_bp, type r */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_r_brk_op; +#define REG_RD_ADDR_marb_bp_r_brk_op 24 + +/* Register r_brk_clients, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_brk_clients; +#define REG_RD_ADDR_marb_bp_r_brk_clients 28 + +/* Register r_brk_first_client, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_brk_first_client; +#define REG_RD_ADDR_marb_bp_r_brk_first_client 32 + +/* Register r_brk_size, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_brk_size; +#define REG_RD_ADDR_marb_bp_r_brk_size 36 + +/* Register rw_ack, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_ack; +#define REG_RD_ADDR_marb_bp_rw_ack 40 +#define REG_WR_ADDR_marb_bp_rw_ack 40 + + +/* Constants */ +enum { + regk_marb_bp_no = 0x00000000, + regk_marb_bp_rw_op_default = 0x00000000, + regk_marb_bp_rw_options_default = 0x00000000, + regk_marb_bp_yes = 0x00000001 +}; +#endif /* __marb_bp_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/reg_rdwr.h b/arch/cris/include/arch-v32/arch/hwregs/reg_rdwr.h new file mode 100644 index 000000000000..236f91efe7e8 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/reg_rdwr.h @@ -0,0 +1,17 @@ +/* + * Read/write register macros used by *_defs.h + */ + +#ifndef reg_rdwr_h +#define reg_rdwr_h + +#ifndef REG_READ +#define REG_READ(type, addr) (*((volatile type *) (addr))) +#endif + +#ifndef REG_WRITE +#define REG_WRITE(type, addr, val) \ + do { *((volatile type *) (addr)) = (val); } while(0) +#endif + +#endif diff --git a/arch/cris/include/arch-v32/arch/hwregs/rt_trace_defs.h b/arch/cris/include/arch-v32/arch/hwregs/rt_trace_defs.h new file mode 100644 index 000000000000..d9f0e924fb23 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/rt_trace_defs.h @@ -0,0 +1,173 @@ +#ifndef __rt_trace_defs_h +#define __rt_trace_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/rt_trace/rtl/rt_regs.r + * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp + * last modfied: Mon Apr 11 16:09:14 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile rt_trace_defs.h ../../inst/rt_trace/rtl/rt_regs.r + * id: $Id: rt_trace_defs.h,v 1.1 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope rt_trace */ + +/* Register rw_cfg, scope rt_trace, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int mode : 1; + unsigned int owner : 1; + unsigned int wp : 1; + unsigned int stall : 1; + unsigned int dummy1 : 3; + unsigned int wp_start : 7; + unsigned int dummy2 : 1; + unsigned int wp_stop : 7; + unsigned int dummy3 : 9; +} reg_rt_trace_rw_cfg; +#define REG_RD_ADDR_rt_trace_rw_cfg 0 +#define REG_WR_ADDR_rt_trace_rw_cfg 0 + +/* Register rw_tap_ctrl, scope rt_trace, type rw */ +typedef struct { + unsigned int ack_data : 1; + unsigned int ack_guru : 1; + unsigned int dummy1 : 30; +} reg_rt_trace_rw_tap_ctrl; +#define REG_RD_ADDR_rt_trace_rw_tap_ctrl 4 +#define REG_WR_ADDR_rt_trace_rw_tap_ctrl 4 + +/* Register r_tap_stat, scope rt_trace, type r */ +typedef struct { + unsigned int dav : 1; + unsigned int empty : 1; + unsigned int dummy1 : 30; +} reg_rt_trace_r_tap_stat; +#define REG_RD_ADDR_rt_trace_r_tap_stat 8 + +/* Register rw_tap_data, scope rt_trace, type rw */ +typedef unsigned int reg_rt_trace_rw_tap_data; +#define REG_RD_ADDR_rt_trace_rw_tap_data 12 +#define REG_WR_ADDR_rt_trace_rw_tap_data 12 + +/* Register rw_tap_hdata, scope rt_trace, type rw */ +typedef struct { + unsigned int op : 4; + unsigned int sub_op : 4; + unsigned int dummy1 : 24; +} reg_rt_trace_rw_tap_hdata; +#define REG_RD_ADDR_rt_trace_rw_tap_hdata 16 +#define REG_WR_ADDR_rt_trace_rw_tap_hdata 16 + +/* Register r_redir, scope rt_trace, type r */ +typedef unsigned int reg_rt_trace_r_redir; +#define REG_RD_ADDR_rt_trace_r_redir 20 + + +/* Constants */ +enum { + regk_rt_trace_brk = 0x0000000c, + regk_rt_trace_dbg = 0x00000003, + regk_rt_trace_dbgdi = 0x00000004, + regk_rt_trace_dbgdo = 0x00000005, + regk_rt_trace_gmode = 0x00000000, + regk_rt_trace_no = 0x00000000, + regk_rt_trace_nop = 0x00000000, + regk_rt_trace_normal = 0x00000000, + regk_rt_trace_rdmem = 0x00000007, + regk_rt_trace_rdmemb = 0x00000009, + regk_rt_trace_rdpreg = 0x00000002, + regk_rt_trace_rdreg = 0x00000001, + regk_rt_trace_rdsreg = 0x00000003, + regk_rt_trace_redir = 0x00000006, + regk_rt_trace_ret = 0x0000000b, + regk_rt_trace_rw_cfg_default = 0x00000000, + regk_rt_trace_trcfg = 0x00000001, + regk_rt_trace_wp = 0x00000001, + regk_rt_trace_wp0 = 0x00000001, + regk_rt_trace_wp1 = 0x00000002, + regk_rt_trace_wp2 = 0x00000004, + regk_rt_trace_wp3 = 0x00000008, + regk_rt_trace_wp4 = 0x00000010, + regk_rt_trace_wp5 = 0x00000020, + regk_rt_trace_wp6 = 0x00000040, + regk_rt_trace_wrmem = 0x00000008, + regk_rt_trace_wrmemb = 0x0000000a, + regk_rt_trace_wrpreg = 0x00000005, + regk_rt_trace_wrreg = 0x00000004, + regk_rt_trace_wrsreg = 0x00000006, + regk_rt_trace_yes = 0x00000001 +}; +#endif /* __rt_trace_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/ser_defs.h b/arch/cris/include/arch-v32/arch/hwregs/ser_defs.h new file mode 100644 index 000000000000..01c2fab97d43 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/ser_defs.h @@ -0,0 +1,308 @@ +#ifndef __ser_defs_h +#define __ser_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/ser/rtl/ser_regs.r + * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp + * last modfied: Mon Apr 11 16:09:21 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile ser_defs.h ../../inst/ser/rtl/ser_regs.r + * id: $Id: ser_defs.h,v 1.10 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope ser */ + +/* Register rw_tr_ctrl, scope ser, type rw */ +typedef struct { + unsigned int base_freq : 3; + unsigned int en : 1; + unsigned int par : 2; + unsigned int par_en : 1; + unsigned int data_bits : 1; + unsigned int stop_bits : 1; + unsigned int stop : 1; + unsigned int rts_delay : 3; + unsigned int rts_setup : 1; + unsigned int auto_rts : 1; + unsigned int txd : 1; + unsigned int auto_cts : 1; + unsigned int dummy1 : 15; +} reg_ser_rw_tr_ctrl; +#define REG_RD_ADDR_ser_rw_tr_ctrl 0 +#define REG_WR_ADDR_ser_rw_tr_ctrl 0 + +/* Register rw_tr_dma_en, scope ser, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int dummy1 : 31; +} reg_ser_rw_tr_dma_en; +#define REG_RD_ADDR_ser_rw_tr_dma_en 4 +#define REG_WR_ADDR_ser_rw_tr_dma_en 4 + +/* Register rw_rec_ctrl, scope ser, type rw */ +typedef struct { + unsigned int base_freq : 3; + unsigned int en : 1; + unsigned int par : 2; + unsigned int par_en : 1; + unsigned int data_bits : 1; + unsigned int dma_mode : 1; + unsigned int dma_err : 1; + unsigned int sampling : 1; + unsigned int timeout : 3; + unsigned int auto_eop : 1; + unsigned int half_duplex : 1; + unsigned int rts_n : 1; + unsigned int loopback : 1; + unsigned int dummy1 : 14; +} reg_ser_rw_rec_ctrl; +#define REG_RD_ADDR_ser_rw_rec_ctrl 8 +#define REG_WR_ADDR_ser_rw_rec_ctrl 8 + +/* Register rw_tr_baud_div, scope ser, type rw */ +typedef struct { + unsigned int div : 16; + unsigned int dummy1 : 16; +} reg_ser_rw_tr_baud_div; +#define REG_RD_ADDR_ser_rw_tr_baud_div 12 +#define REG_WR_ADDR_ser_rw_tr_baud_div 12 + +/* Register rw_rec_baud_div, scope ser, type rw */ +typedef struct { + unsigned int div : 16; + unsigned int dummy1 : 16; +} reg_ser_rw_rec_baud_div; +#define REG_RD_ADDR_ser_rw_rec_baud_div 16 +#define REG_WR_ADDR_ser_rw_rec_baud_div 16 + +/* Register rw_xoff, scope ser, type rw */ +typedef struct { + unsigned int chr : 8; + unsigned int automatic : 1; + unsigned int dummy1 : 23; +} reg_ser_rw_xoff; +#define REG_RD_ADDR_ser_rw_xoff 20 +#define REG_WR_ADDR_ser_rw_xoff 20 + +/* Register rw_xoff_clr, scope ser, type rw */ +typedef struct { + unsigned int clr : 1; + unsigned int dummy1 : 31; +} reg_ser_rw_xoff_clr; +#define REG_RD_ADDR_ser_rw_xoff_clr 24 +#define REG_WR_ADDR_ser_rw_xoff_clr 24 + +/* Register rw_dout, scope ser, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_ser_rw_dout; +#define REG_RD_ADDR_ser_rw_dout 28 +#define REG_WR_ADDR_ser_rw_dout 28 + +/* Register rs_stat_din, scope ser, type rs */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 8; + unsigned int dav : 1; + unsigned int framing_err : 1; + unsigned int par_err : 1; + unsigned int orun : 1; + unsigned int rec_err : 1; + unsigned int rxd : 1; + unsigned int tr_idle : 1; + unsigned int tr_empty : 1; + unsigned int tr_rdy : 1; + unsigned int cts_n : 1; + unsigned int xoff_detect : 1; + unsigned int rts_n : 1; + unsigned int txd : 1; + unsigned int dummy2 : 3; +} reg_ser_rs_stat_din; +#define REG_RD_ADDR_ser_rs_stat_din 32 + +/* Register r_stat_din, scope ser, type r */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 8; + unsigned int dav : 1; + unsigned int framing_err : 1; + unsigned int par_err : 1; + unsigned int orun : 1; + unsigned int rec_err : 1; + unsigned int rxd : 1; + unsigned int tr_idle : 1; + unsigned int tr_empty : 1; + unsigned int tr_rdy : 1; + unsigned int cts_n : 1; + unsigned int xoff_detect : 1; + unsigned int rts_n : 1; + unsigned int txd : 1; + unsigned int dummy2 : 3; +} reg_ser_r_stat_din; +#define REG_RD_ADDR_ser_r_stat_din 36 + +/* Register rw_rec_eop, scope ser, type rw */ +typedef struct { + unsigned int set : 1; + unsigned int dummy1 : 31; +} reg_ser_rw_rec_eop; +#define REG_RD_ADDR_ser_rw_rec_eop 40 +#define REG_WR_ADDR_ser_rw_rec_eop 40 + +/* Register rw_intr_mask, scope ser, type rw */ +typedef struct { + unsigned int tr_rdy : 1; + unsigned int tr_empty : 1; + unsigned int tr_idle : 1; + unsigned int dav : 1; + unsigned int dummy1 : 28; +} reg_ser_rw_intr_mask; +#define REG_RD_ADDR_ser_rw_intr_mask 44 +#define REG_WR_ADDR_ser_rw_intr_mask 44 + +/* Register rw_ack_intr, scope ser, type rw */ +typedef struct { + unsigned int tr_rdy : 1; + unsigned int tr_empty : 1; + unsigned int tr_idle : 1; + unsigned int dav : 1; + unsigned int dummy1 : 28; +} reg_ser_rw_ack_intr; +#define REG_RD_ADDR_ser_rw_ack_intr 48 +#define REG_WR_ADDR_ser_rw_ack_intr 48 + +/* Register r_intr, scope ser, type r */ +typedef struct { + unsigned int tr_rdy : 1; + unsigned int tr_empty : 1; + unsigned int tr_idle : 1; + unsigned int dav : 1; + unsigned int dummy1 : 28; +} reg_ser_r_intr; +#define REG_RD_ADDR_ser_r_intr 52 + +/* Register r_masked_intr, scope ser, type r */ +typedef struct { + unsigned int tr_rdy : 1; + unsigned int tr_empty : 1; + unsigned int tr_idle : 1; + unsigned int dav : 1; + unsigned int dummy1 : 28; +} reg_ser_r_masked_intr; +#define REG_RD_ADDR_ser_r_masked_intr 56 + + +/* Constants */ +enum { + regk_ser_active = 0x00000000, + regk_ser_bits1 = 0x00000000, + regk_ser_bits2 = 0x00000001, + regk_ser_bits7 = 0x00000001, + regk_ser_bits8 = 0x00000000, + regk_ser_del0_5 = 0x00000000, + regk_ser_del1 = 0x00000001, + regk_ser_del1_5 = 0x00000002, + regk_ser_del2 = 0x00000003, + regk_ser_del2_5 = 0x00000004, + regk_ser_del3 = 0x00000005, + regk_ser_del3_5 = 0x00000006, + regk_ser_del4 = 0x00000007, + regk_ser_even = 0x00000000, + regk_ser_ext = 0x00000001, + regk_ser_f100 = 0x00000007, + regk_ser_f29_493 = 0x00000004, + regk_ser_f32 = 0x00000005, + regk_ser_f32_768 = 0x00000006, + regk_ser_ignore = 0x00000001, + regk_ser_inactive = 0x00000001, + regk_ser_majority = 0x00000001, + regk_ser_mark = 0x00000002, + regk_ser_middle = 0x00000000, + regk_ser_no = 0x00000000, + regk_ser_odd = 0x00000001, + regk_ser_off = 0x00000000, + regk_ser_rw_intr_mask_default = 0x00000000, + regk_ser_rw_rec_baud_div_default = 0x00000000, + regk_ser_rw_rec_ctrl_default = 0x00010000, + regk_ser_rw_tr_baud_div_default = 0x00000000, + regk_ser_rw_tr_ctrl_default = 0x00008000, + regk_ser_rw_tr_dma_en_default = 0x00000000, + regk_ser_rw_xoff_default = 0x00000000, + regk_ser_space = 0x00000003, + regk_ser_stop = 0x00000000, + regk_ser_yes = 0x00000001 +}; +#endif /* __ser_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/sser_defs.h b/arch/cris/include/arch-v32/arch/hwregs/sser_defs.h new file mode 100644 index 000000000000..8d1dab218b91 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/sser_defs.h @@ -0,0 +1,331 @@ +#ifndef __sser_defs_h +#define __sser_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/syncser/rtl/sser_regs.r + * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp + * last modfied: Mon Apr 11 16:09:48 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile sser_defs.h ../../inst/syncser/rtl/sser_regs.r + * id: $Id: sser_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope sser */ + +/* Register rw_cfg, scope sser, type rw */ +typedef struct { + unsigned int clk_div : 16; + unsigned int base_freq : 3; + unsigned int gate_clk : 1; + unsigned int clkgate_ctrl : 1; + unsigned int clkgate_in : 1; + unsigned int clk_dir : 1; + unsigned int clk_od_mode : 1; + unsigned int out_clk_pol : 1; + unsigned int out_clk_src : 2; + unsigned int clk_in_sel : 1; + unsigned int hold_pol : 1; + unsigned int prepare : 1; + unsigned int en : 1; + unsigned int dummy1 : 1; +} reg_sser_rw_cfg; +#define REG_RD_ADDR_sser_rw_cfg 0 +#define REG_WR_ADDR_sser_rw_cfg 0 + +/* Register rw_frm_cfg, scope sser, type rw */ +typedef struct { + unsigned int wordrate : 10; + unsigned int rec_delay : 3; + unsigned int tr_delay : 3; + unsigned int early_wend : 1; + unsigned int level : 2; + unsigned int type : 1; + unsigned int clk_pol : 1; + unsigned int fr_in_rxclk : 1; + unsigned int clk_src : 1; + unsigned int out_off : 1; + unsigned int out_on : 1; + unsigned int frame_pin_dir : 1; + unsigned int frame_pin_use : 2; + unsigned int status_pin_dir : 1; + unsigned int status_pin_use : 2; + unsigned int dummy1 : 1; +} reg_sser_rw_frm_cfg; +#define REG_RD_ADDR_sser_rw_frm_cfg 4 +#define REG_WR_ADDR_sser_rw_frm_cfg 4 + +/* Register rw_tr_cfg, scope sser, type rw */ +typedef struct { + unsigned int tr_en : 1; + unsigned int stop : 1; + unsigned int urun_stop : 1; + unsigned int eop_stop : 1; + unsigned int sample_size : 6; + unsigned int sh_dir : 1; + unsigned int clk_pol : 1; + unsigned int clk_src : 1; + unsigned int use_dma : 1; + unsigned int mode : 2; + unsigned int frm_src : 1; + unsigned int use60958 : 1; + unsigned int iec60958_ckdiv : 2; + unsigned int rate_ctrl : 1; + unsigned int use_md : 1; + unsigned int dual_i2s : 1; + unsigned int data_pin_use : 2; + unsigned int od_mode : 1; + unsigned int bulk_wspace : 2; + unsigned int dummy1 : 4; +} reg_sser_rw_tr_cfg; +#define REG_RD_ADDR_sser_rw_tr_cfg 8 +#define REG_WR_ADDR_sser_rw_tr_cfg 8 + +/* Register rw_rec_cfg, scope sser, type rw */ +typedef struct { + unsigned int rec_en : 1; + unsigned int force_eop : 1; + unsigned int stop : 1; + unsigned int orun_stop : 1; + unsigned int eop_stop : 1; + unsigned int sample_size : 6; + unsigned int sh_dir : 1; + unsigned int clk_pol : 1; + unsigned int clk_src : 1; + unsigned int use_dma : 1; + unsigned int mode : 2; + unsigned int frm_src : 2; + unsigned int use60958 : 1; + unsigned int iec60958_ui_len : 5; + unsigned int slave2_en : 1; + unsigned int slave3_en : 1; + unsigned int fifo_thr : 2; + unsigned int dummy1 : 3; +} reg_sser_rw_rec_cfg; +#define REG_RD_ADDR_sser_rw_rec_cfg 12 +#define REG_WR_ADDR_sser_rw_rec_cfg 12 + +/* Register rw_tr_data, scope sser, type rw */ +typedef struct { + unsigned int data : 16; + unsigned int md : 1; + unsigned int dummy1 : 15; +} reg_sser_rw_tr_data; +#define REG_RD_ADDR_sser_rw_tr_data 16 +#define REG_WR_ADDR_sser_rw_tr_data 16 + +/* Register r_rec_data, scope sser, type r */ +typedef struct { + unsigned int data : 16; + unsigned int md : 1; + unsigned int ext_clk : 1; + unsigned int status_in : 1; + unsigned int frame_in : 1; + unsigned int din : 1; + unsigned int data_in : 1; + unsigned int clk_in : 1; + unsigned int dummy1 : 9; +} reg_sser_r_rec_data; +#define REG_RD_ADDR_sser_r_rec_data 20 + +/* Register rw_extra, scope sser, type rw */ +typedef struct { + unsigned int clkoff_cycles : 20; + unsigned int clkoff_en : 1; + unsigned int clkon_en : 1; + unsigned int dout_delay : 5; + unsigned int dummy1 : 5; +} reg_sser_rw_extra; +#define REG_RD_ADDR_sser_rw_extra 24 +#define REG_WR_ADDR_sser_rw_extra 24 + +/* Register rw_intr_mask, scope sser, type rw */ +typedef struct { + unsigned int trdy : 1; + unsigned int rdav : 1; + unsigned int tidle : 1; + unsigned int rstop : 1; + unsigned int urun : 1; + unsigned int orun : 1; + unsigned int md_rec : 1; + unsigned int md_sent : 1; + unsigned int r958err : 1; + unsigned int dummy1 : 23; +} reg_sser_rw_intr_mask; +#define REG_RD_ADDR_sser_rw_intr_mask 28 +#define REG_WR_ADDR_sser_rw_intr_mask 28 + +/* Register rw_ack_intr, scope sser, type rw */ +typedef struct { + unsigned int trdy : 1; + unsigned int rdav : 1; + unsigned int tidle : 1; + unsigned int rstop : 1; + unsigned int urun : 1; + unsigned int orun : 1; + unsigned int md_rec : 1; + unsigned int md_sent : 1; + unsigned int r958err : 1; + unsigned int dummy1 : 23; +} reg_sser_rw_ack_intr; +#define REG_RD_ADDR_sser_rw_ack_intr 32 +#define REG_WR_ADDR_sser_rw_ack_intr 32 + +/* Register r_intr, scope sser, type r */ +typedef struct { + unsigned int trdy : 1; + unsigned int rdav : 1; + unsigned int tidle : 1; + unsigned int rstop : 1; + unsigned int urun : 1; + unsigned int orun : 1; + unsigned int md_rec : 1; + unsigned int md_sent : 1; + unsigned int r958err : 1; + unsigned int dummy1 : 23; +} reg_sser_r_intr; +#define REG_RD_ADDR_sser_r_intr 36 + +/* Register r_masked_intr, scope sser, type r */ +typedef struct { + unsigned int trdy : 1; + unsigned int rdav : 1; + unsigned int tidle : 1; + unsigned int rstop : 1; + unsigned int urun : 1; + unsigned int orun : 1; + unsigned int md_rec : 1; + unsigned int md_sent : 1; + unsigned int r958err : 1; + unsigned int dummy1 : 23; +} reg_sser_r_masked_intr; +#define REG_RD_ADDR_sser_r_masked_intr 40 + + +/* Constants */ +enum { + regk_sser_both = 0x00000002, + regk_sser_bulk = 0x00000001, + regk_sser_clk100 = 0x00000000, + regk_sser_clk_in = 0x00000000, + regk_sser_const0 = 0x00000003, + regk_sser_dout = 0x00000002, + regk_sser_edge = 0x00000000, + regk_sser_ext = 0x00000001, + regk_sser_ext_clk = 0x00000001, + regk_sser_f100 = 0x00000000, + regk_sser_f29_493 = 0x00000004, + regk_sser_f32 = 0x00000005, + regk_sser_f32_768 = 0x00000006, + regk_sser_frm = 0x00000003, + regk_sser_gio0 = 0x00000000, + regk_sser_gio1 = 0x00000001, + regk_sser_hispeed = 0x00000001, + regk_sser_hold = 0x00000002, + regk_sser_in = 0x00000000, + regk_sser_inf = 0x00000003, + regk_sser_intern = 0x00000000, + regk_sser_intern_clk = 0x00000001, + regk_sser_intern_tb = 0x00000000, + regk_sser_iso = 0x00000000, + regk_sser_level = 0x00000001, + regk_sser_lospeed = 0x00000000, + regk_sser_lsbfirst = 0x00000000, + regk_sser_msbfirst = 0x00000001, + regk_sser_neg = 0x00000001, + regk_sser_neg_lo = 0x00000000, + regk_sser_no = 0x00000000, + regk_sser_no_clk = 0x00000007, + regk_sser_nojitter = 0x00000002, + regk_sser_out = 0x00000001, + regk_sser_pos = 0x00000000, + regk_sser_pos_hi = 0x00000001, + regk_sser_rec = 0x00000000, + regk_sser_rw_cfg_default = 0x00000000, + regk_sser_rw_extra_default = 0x00000000, + regk_sser_rw_frm_cfg_default = 0x00000000, + regk_sser_rw_intr_mask_default = 0x00000000, + regk_sser_rw_rec_cfg_default = 0x00000000, + regk_sser_rw_tr_cfg_default = 0x01800000, + regk_sser_rw_tr_data_default = 0x00000000, + regk_sser_thr16 = 0x00000001, + regk_sser_thr32 = 0x00000002, + regk_sser_thr8 = 0x00000000, + regk_sser_tr = 0x00000001, + regk_sser_ts_out = 0x00000003, + regk_sser_tx_bulk = 0x00000002, + regk_sser_wiresave = 0x00000002, + regk_sser_yes = 0x00000001 +}; +#endif /* __sser_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/strcop.h b/arch/cris/include/arch-v32/arch/hwregs/strcop.h new file mode 100644 index 000000000000..35131ba466f3 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/strcop.h @@ -0,0 +1,57 @@ +// $Id: strcop.h,v 1.3 2003/10/22 13:27:12 henriken Exp $ + +// Streamcop meta-data configuration structs + +struct strcop_meta_out { + unsigned char csumsel : 3; + unsigned char ciphsel : 3; + unsigned char ciphconf : 2; + unsigned char hashsel : 3; + unsigned char hashconf : 1; + unsigned char hashmode : 1; + unsigned char decrypt : 1; + unsigned char dlkey : 1; + unsigned char cbcmode : 1; +}; + +struct strcop_meta_in { + unsigned char dmasel : 3; + unsigned char sync : 1; + unsigned char res1 : 5; + unsigned char res2; +}; + +// Source definitions + +enum { + src_none = 0, + src_dma = 1, + src_des = 2, + src_sha1 = 3, + src_csum = 4, + src_aes = 5, + src_md5 = 6, + src_res = 7 +}; + +// Cipher definitions + +enum { + ciph_des = 0, + ciph_3des = 1, + ciph_aes = 2 +}; + +// Hash definitions + +enum { + hash_sha1 = 0, + hash_md5 = 1 +}; + +enum { + hash_noiv = 0, + hash_iv = 1 +}; + + diff --git a/arch/cris/include/arch-v32/arch/hwregs/strcop_defs.h b/arch/cris/include/arch-v32/arch/hwregs/strcop_defs.h new file mode 100644 index 000000000000..bd145a49b2c4 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/strcop_defs.h @@ -0,0 +1,109 @@ +#ifndef __strcop_defs_h +#define __strcop_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/strcop/rtl/strcop_regs.r + * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp + * last modfied: Mon Apr 11 16:09:38 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strcop_defs.h ../../inst/strcop/rtl/strcop_regs.r + * id: $Id: strcop_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope strcop */ + +/* Register rw_cfg, scope strcop, type rw */ +typedef struct { + unsigned int td3 : 1; + unsigned int td2 : 1; + unsigned int td1 : 1; + unsigned int ipend : 1; + unsigned int ignore_sync : 1; + unsigned int en : 1; + unsigned int dummy1 : 26; +} reg_strcop_rw_cfg; +#define REG_RD_ADDR_strcop_rw_cfg 0 +#define REG_WR_ADDR_strcop_rw_cfg 0 + + +/* Constants */ +enum { + regk_strcop_big = 0x00000001, + regk_strcop_d = 0x00000001, + regk_strcop_e = 0x00000000, + regk_strcop_little = 0x00000000, + regk_strcop_rw_cfg_default = 0x00000002 +}; +#endif /* __strcop_defs_h */ diff --git a/arch/cris/include/arch-v32/arch/hwregs/supp_reg.h b/arch/cris/include/arch-v32/arch/hwregs/supp_reg.h new file mode 100644 index 000000000000..ffe49625ae36 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/hwregs/supp_reg.h @@ -0,0 +1,78 @@ +#ifndef __SUPP_REG_H__ +#define __SUPP_REG_H__ + +/* Macros for reading and writing support/special registers. */ + +#ifndef STRINGIFYFY +#define STRINGIFYFY(i) #i +#endif + +#ifndef STRINGIFY +#define STRINGIFY(i) STRINGIFYFY(i) +#endif + +#define SPEC_REG_BZ "BZ" +#define SPEC_REG_VR "VR" +#define SPEC_REG_PID "PID" +#define SPEC_REG_SRS "SRS" +#define SPEC_REG_WZ "WZ" +#define SPEC_REG_EXS "EXS" +#define SPEC_REG_EDA "EDA" +#define SPEC_REG_MOF "MOF" +#define SPEC_REG_DZ "DZ" +#define SPEC_REG_EBP "EBP" +#define SPEC_REG_ERP "ERP" +#define SPEC_REG_SRP "SRP" +#define SPEC_REG_NRP "NRP" +#define SPEC_REG_CCS "CCS" +#define SPEC_REG_USP "USP" +#define SPEC_REG_SPC "SPC" + +#define RW_MM_CFG 0 +#define RW_MM_KBASE_LO 1 +#define RW_MM_KBASE_HI 2 +#define RW_MM_CAUSE 3 +#define RW_MM_TLB_SEL 4 +#define RW_MM_TLB_LO 5 +#define RW_MM_TLB_HI 6 +#define RW_MM_TLB_PGD 7 + +#define BANK_GC 0 +#define BANK_IM 1 +#define BANK_DM 2 +#define BANK_BP 3 + +#define RW_GC_CFG 0 +#define RW_GC_CCS 1 +#define RW_GC_SRS 2 +#define RW_GC_NRP 3 +#define RW_GC_EXS 4 +#define RW_GC_R0 8 +#define RW_GC_R1 9 + +#define SPEC_REG_WR(r,v) \ +__asm__ __volatile__ ("move %0, $" r : : "r" (v)); + +#define SPEC_REG_RD(r,v) \ +__asm__ __volatile__ ("move $" r ",%0" : "=r" (v)); + +#define NOP() \ + __asm__ __volatile__ ("nop"); + +#define SUPP_BANK_SEL(b) \ + SPEC_REG_WR(SPEC_REG_SRS,b); \ + NOP(); \ + NOP(); \ + NOP(); + +#define SUPP_REG_WR(r,v) \ +__asm__ __volatile__ ("move %0, $S" STRINGIFYFY(r) "\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + : : "r" (v)); + +#define SUPP_REG_RD(r,v) \ +__asm__ __volatile__ ("move $S" STRINGIFYFY(r) ",%0" : "=r" (v)); + +#endif /* __SUPP_REG_H__ */ diff --git a/arch/cris/include/arch-v32/arch/intmem.h b/arch/cris/include/arch-v32/arch/intmem.h new file mode 100644 index 000000000000..c0ada33bf90f --- /dev/null +++ b/arch/cris/include/arch-v32/arch/intmem.h @@ -0,0 +1,9 @@ +#ifndef _ASM_CRIS_INTMEM_H +#define _ASM_CRIS_INTMEM_H + +void* crisv32_intmem_alloc(unsigned size, unsigned align); +void crisv32_intmem_free(void* addr); +void* crisv32_intmem_phys_to_virt(unsigned long addr); +unsigned long crisv32_intmem_virt_to_phys(void *addr); + +#endif /* _ASM_CRIS_ARCH_INTMEM_H */ diff --git a/arch/cris/include/arch-v32/arch/io.h b/arch/cris/include/arch-v32/arch/io.h new file mode 100644 index 000000000000..72024452cea9 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/io.h @@ -0,0 +1,136 @@ +#ifndef _ASM_ARCH_CRIS_IO_H +#define _ASM_ARCH_CRIS_IO_H + +#include +#include +#include +#include + +enum crisv32_io_dir +{ + crisv32_io_dir_in = 0, + crisv32_io_dir_out = 1 +}; + +struct crisv32_ioport +{ + volatile unsigned long *oe; + volatile unsigned long *data; + volatile unsigned long *data_in; + unsigned int pin_count; + spinlock_t lock; +}; + +struct crisv32_iopin +{ + struct crisv32_ioport* port; + int bit; +}; + +extern struct crisv32_ioport crisv32_ioports[]; + +extern struct crisv32_iopin crisv32_led1_green; +extern struct crisv32_iopin crisv32_led1_red; +extern struct crisv32_iopin crisv32_led2_green; +extern struct crisv32_iopin crisv32_led2_red; +extern struct crisv32_iopin crisv32_led3_green; +extern struct crisv32_iopin crisv32_led3_red; + +extern struct crisv32_iopin crisv32_led_net0_green; +extern struct crisv32_iopin crisv32_led_net0_red; +extern struct crisv32_iopin crisv32_led_net1_green; +extern struct crisv32_iopin crisv32_led_net1_red; + +static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val) +{ + unsigned long flags; + spin_lock_irqsave(&iopin->port->lock, flags); + + if (val) + *iopin->port->data |= iopin->bit; + else + *iopin->port->data &= ~iopin->bit; + + spin_unlock_irqrestore(&iopin->port->lock, flags); +} + +static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin, + enum crisv32_io_dir dir) +{ + unsigned long flags; + spin_lock_irqsave(&iopin->port->lock, flags); + + if (dir == crisv32_io_dir_in) + *iopin->port->oe &= ~iopin->bit; + else + *iopin->port->oe |= iopin->bit; + + spin_unlock_irqrestore(&iopin->port->lock, flags); +} + +static inline int crisv32_io_rd(struct crisv32_iopin* iopin) +{ + return ((*iopin->port->data_in & iopin->bit) ? 1 : 0); +} + +int crisv32_io_get(struct crisv32_iopin* iopin, + unsigned int port, unsigned int pin); +int crisv32_io_get_name(struct crisv32_iopin* iopin, + const char *name); + +#define CRIS_LED_OFF 0x00 +#define CRIS_LED_GREEN 0x01 +#define CRIS_LED_RED 0x02 +#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED) + +#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) +#define CRIS_LED_NETWORK_GRP0_SET(x) \ + do { \ + CRIS_LED_NETWORK_GRP0_SET_G((x) & CRIS_LED_GREEN); \ + CRIS_LED_NETWORK_GRP0_SET_R((x) & CRIS_LED_RED); \ + } while (0) +#else +#define CRIS_LED_NETWORK_GRP0_SET(x) while (0) {} +#endif + +#define CRIS_LED_NETWORK_GRP0_SET_G(x) \ + crisv32_io_set(&crisv32_led_net0_green, !(x)); + +#define CRIS_LED_NETWORK_GRP0_SET_R(x) \ + crisv32_io_set(&crisv32_led_net0_red, !(x)); + +#if defined(CONFIG_ETRAX_NBR_LED_GRP_TWO) +#define CRIS_LED_NETWORK_GRP1_SET(x) \ + do { \ + CRIS_LED_NETWORK_GRP1_SET_G((x) & CRIS_LED_GREEN); \ + CRIS_LED_NETWORK_GRP1_SET_R((x) & CRIS_LED_RED); \ + } while (0) +#else +#define CRIS_LED_NETWORK_GRP1_SET(x) while (0) {} +#endif + +#define CRIS_LED_NETWORK_GRP1_SET_G(x) \ + crisv32_io_set(&crisv32_led_net1_green, !(x)); + +#define CRIS_LED_NETWORK_GRP1_SET_R(x) \ + crisv32_io_set(&crisv32_led_net1_red, !(x)); + +#define CRIS_LED_ACTIVE_SET(x) \ + do { \ + CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ + CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \ + } while (0) + +#define CRIS_LED_ACTIVE_SET_G(x) \ + crisv32_io_set(&crisv32_led2_green, !(x)); +#define CRIS_LED_ACTIVE_SET_R(x) \ + crisv32_io_set(&crisv32_led2_red, !(x)); +#define CRIS_LED_DISK_WRITE(x) \ + do{\ + crisv32_io_set(&crisv32_led3_green, !(x)); \ + crisv32_io_set(&crisv32_led3_red, !(x)); \ + }while(0) +#define CRIS_LED_DISK_READ(x) \ + crisv32_io_set(&crisv32_led3_green, !(x)); + +#endif diff --git a/arch/cris/include/arch-v32/arch/irq.h b/arch/cris/include/arch-v32/arch/irq.h new file mode 100644 index 000000000000..9e4c9fbdfddf --- /dev/null +++ b/arch/cris/include/arch-v32/arch/irq.h @@ -0,0 +1,124 @@ +#ifndef _ASM_ARCH_IRQ_H +#define _ASM_ARCH_IRQ_H + +#include + +/* Number of non-cpu interrupts. */ +#define NR_IRQS NBR_INTR_VECT /* Exceptions + IRQs */ +#define FIRST_IRQ 0x31 /* Exception number for first IRQ */ +#define NR_REAL_IRQS (NBR_INTR_VECT - FIRST_IRQ) /* IRQs */ +#if NR_REAL_IRQS > 32 +#define MACH_IRQS 64 +#else +#define MACH_IRQS 32 +#endif + +#ifndef __ASSEMBLY__ +/* Global IRQ vector. */ +typedef void (*irqvectptr)(void); + +struct etrax_interrupt_vector { + irqvectptr v[256]; +}; + +extern struct etrax_interrupt_vector *etrax_irv; /* head.S */ + +void mask_irq(int irq); +void unmask_irq(int irq); + +void set_exception_vector(int n, irqvectptr addr); + +/* Save registers so that they match pt_regs. */ +#define SAVE_ALL \ + "subq 12,$sp\n\t" \ + "move $erp,[$sp]\n\t" \ + "subq 4,$sp\n\t" \ + "move $srp,[$sp]\n\t" \ + "subq 4,$sp\n\t" \ + "move $ccs,[$sp]\n\t" \ + "subq 4,$sp\n\t" \ + "move $spc,[$sp]\n\t" \ + "subq 4,$sp\n\t" \ + "move $mof,[$sp]\n\t" \ + "subq 4,$sp\n\t" \ + "move $srs,[$sp]\n\t" \ + "subq 4,$sp\n\t" \ + "move.d $acr,[$sp]\n\t" \ + "subq 14*4,$sp\n\t" \ + "movem $r13,[$sp]\n\t" \ + "subq 4,$sp\n\t" \ + "move.d $r10,[$sp]\n" + +#define STR2(x) #x +#define STR(x) STR2(x) + +#define IRQ_NAME2(nr) nr##_interrupt(void) +#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) + +/* + * The reason for setting the S-bit when debugging the kernel is that we want + * hardware breakpoints to remain active while we are in an exception handler. + * Note that we cannot simply copy S1, since we may come here from user-space, + * or any context where the S-bit wasn't set. + */ +#ifdef CONFIG_ETRAX_KGDB +#define KGDB_FIXUP \ + "move $ccs, $r10\n\t" \ + "or.d (1<<9), $r10\n\t" \ + "move $r10, $ccs\n\t" +#else +#define KGDB_FIXUP "" +#endif + +/* + * Make sure the causing IRQ is blocked, then call do_IRQ. After that, unblock + * and jump to ret_from_intr which is found in entry.S. + * + * The reason for blocking the IRQ is to allow an sti() before the handler, + * which will acknowledge the interrupt, is run. The actual blocking is made + * by crisv32_do_IRQ. + */ +#define BUILD_IRQ(nr) \ +void IRQ_NAME(nr); \ +__asm__ ( \ + ".text\n\t" \ + "IRQ" #nr "_interrupt:\n\t" \ + SAVE_ALL \ + KGDB_FIXUP \ + "move.d "#nr",$r10\n\t" \ + "move.d $sp, $r12\n\t" \ + "jsr crisv32_do_IRQ\n\t" \ + "moveq 1, $r11\n\t" \ + "jump ret_from_intr\n\t" \ + "nop\n\t"); +/* + * This is subtle. The timer interrupt is crucial and it should not be disabled + * for too long. However, if it had been a normal interrupt as per BUILD_IRQ, it + * would have been BLOCK'ed, and then softirq's are run before we return here to + * UNBLOCK. If the softirq's take too much time to run, the timer irq won't run + * and the watchdog will kill us. + * + * Furthermore, if a lot of other irq's occur before we return here, the + * multiple_irq handler is run and it prioritizes the timer interrupt. However + * if we had BLOCK'edit here, we would not get the multiple_irq at all. + * + * The non-blocking here is based on the knowledge that the timer interrupt is + * registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not + * be an sti() before the timer irq handler is run to acknowledge the interrupt. + */ +#define BUILD_TIMER_IRQ(nr, mask) \ +void IRQ_NAME(nr); \ +__asm__ ( \ + ".text\n\t" \ + "IRQ" #nr "_interrupt:\n\t" \ + SAVE_ALL \ + KGDB_FIXUP \ + "move.d "#nr",$r10\n\t" \ + "move.d $sp,$r12\n\t" \ + "jsr crisv32_do_IRQ\n\t" \ + "moveq 0,$r11\n\t" \ + "jump ret_from_intr\n\t" \ + "nop\n\t"); + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_ARCH_IRQ_H */ diff --git a/arch/cris/include/arch-v32/arch/memmap.h b/arch/cris/include/arch-v32/arch/memmap.h new file mode 100644 index 000000000000..d29df5644d3e --- /dev/null +++ b/arch/cris/include/arch-v32/arch/memmap.h @@ -0,0 +1,24 @@ +#ifndef _ASM_ARCH_MEMMAP_H +#define _ASM_ARCH_MEMMAP_H + +#define MEM_CSE0_START (0x00000000) +#define MEM_CSE0_SIZE (0x04000000) +#define MEM_CSE1_START (0x04000000) +#define MEM_CSE1_SIZE (0x04000000) +#define MEM_CSR0_START (0x08000000) +#define MEM_CSR1_START (0x0c000000) +#define MEM_CSP0_START (0x10000000) +#define MEM_CSP1_START (0x14000000) +#define MEM_CSP2_START (0x18000000) +#define MEM_CSP3_START (0x1c000000) +#define MEM_CSP4_START (0x20000000) +#define MEM_CSP5_START (0x24000000) +#define MEM_CSP6_START (0x28000000) +#define MEM_CSP7_START (0x2c000000) +#define MEM_INTMEM_START (0x38000000) +#define MEM_INTMEM_SIZE (0x00020000) +#define MEM_DRAM_START (0x40000000) + +#define MEM_NON_CACHEABLE (0x80000000) + +#endif diff --git a/arch/cris/include/arch-v32/arch/mmu.h b/arch/cris/include/arch-v32/arch/mmu.h new file mode 100644 index 000000000000..6bcdc3fdf7dc --- /dev/null +++ b/arch/cris/include/arch-v32/arch/mmu.h @@ -0,0 +1,111 @@ +#ifndef _ASM_CRIS_ARCH_MMU_H +#define _ASM_CRIS_ARCH_MMU_H + +/* MMU context type. */ +typedef struct +{ + unsigned int page_id; +} mm_context_t; + +/* Kernel memory segments. */ +#define KSEG_F 0xf0000000UL +#define KSEG_E 0xe0000000UL +#define KSEG_D 0xd0000000UL +#define KSEG_C 0xc0000000UL +#define KSEG_B 0xb0000000UL +#define KSEG_A 0xa0000000UL +#define KSEG_9 0x90000000UL +#define KSEG_8 0x80000000UL +#define KSEG_7 0x70000000UL +#define KSEG_6 0x60000000UL +#define KSEG_5 0x50000000UL +#define KSEG_4 0x40000000UL +#define KSEG_3 0x30000000UL +#define KSEG_2 0x20000000UL +#define KSEG_1 0x10000000UL +#define KSEG_0 0x00000000UL + +/* + * CRISv32 PTE bits: + * + * Bit: 31-13 12-5 4 3 2 1 0 + * +-----+------+--------+-------+--------+-------+---------+ + * | pfn | zero | global | valid | kernel | write | execute | + * +-----+------+--------+-------+--------+-------+---------+ + */ + +/* + * Defines for accessing the bits. Also define some synonyms for use with + * the software-based defined bits below. + */ +#define _PAGE_EXECUTE (1 << 0) /* Execution bit. */ +#define _PAGE_WE (1 << 1) /* Write bit. */ +#define _PAGE_SILENT_WRITE (1 << 1) /* Same as above. */ +#define _PAGE_KERNEL (1 << 2) /* Kernel mode page. */ +#define _PAGE_VALID (1 << 3) /* Page is valid. */ +#define _PAGE_SILENT_READ (1 << 3) /* Same as above. */ +#define _PAGE_GLOBAL (1 << 4) /* Global page. */ + +/* + * The hardware doesn't care about these bits, but the kernel uses them in + * software. + */ +#define _PAGE_PRESENT (1 << 5) /* Page is present in memory. */ +#define _PAGE_FILE (1 << 6) /* 1=pagecache, 0=swap (when !present) */ +#define _PAGE_ACCESSED (1 << 6) /* Simulated in software using valid bit. */ +#define _PAGE_MODIFIED (1 << 7) /* Simulated in software using we bit. */ +#define _PAGE_READ (1 << 8) /* Read enabled. */ +#define _PAGE_WRITE (1 << 9) /* Write enabled. */ + +/* Define some higher level generic page attributes. */ +#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED) +#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) + +#define _PAGE_TABLE (_PAGE_PRESENT | __READABLE | __WRITEABLE) +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED) + +#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_WRITE | \ + _PAGE_ACCESSED) +#define PAGE_SHARED_EXEC __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_WRITE | \ + _PAGE_ACCESSED | _PAGE_EXECUTE) + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | __READABLE) +#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_EXECUTE | _PAGE_ACCESSED) + +#define PAGE_COPY __pgprot(_PAGE_PRESENT | __READABLE) +#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_EXECUTE) +#define PAGE_KERNEL __pgprot(_PAGE_GLOBAL | _PAGE_KERNEL | \ + _PAGE_PRESENT | __READABLE | __WRITEABLE) +#define PAGE_KERNEL_EXEC __pgprot(_PAGE_GLOBAL | _PAGE_KERNEL | _PAGE_EXECUTE | \ + _PAGE_PRESENT | __READABLE | __WRITEABLE) +#define PAGE_SIGNAL_TRAMPOLINE __pgprot(_PAGE_GLOBAL | _PAGE_EXECUTE | \ + _PAGE_PRESENT | __READABLE) + +#define _KERNPG_TABLE (_PAGE_TABLE | _PAGE_KERNEL) + +/* CRISv32 can do page protection for execute. + * Write permissions imply read permissions. + * Note that the numbers are in Execute-Write-Read order! + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY_EXEC +#define __P101 PAGE_READONLY_EXEC +#define __P110 PAGE_COPY_EXEC +#define __P111 PAGE_COPY_EXEC + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY_EXEC +#define __S101 PAGE_READONLY_EXEC +#define __S110 PAGE_SHARED_EXEC +#define __S111 PAGE_SHARED_EXEC + +#define PTE_FILE_MAX_BITS 25 + +#endif /* _ASM_CRIS_ARCH_MMU_H */ diff --git a/arch/cris/include/arch-v32/arch/offset.h b/arch/cris/include/arch-v32/arch/offset.h new file mode 100644 index 000000000000..4442c4bd52f4 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/offset.h @@ -0,0 +1,35 @@ +#ifndef __ASM_OFFSETS_H__ +#define __ASM_OFFSETS_H__ +/* + * DO NOT MODIFY. + * + * This file was generated by arch/cris/Makefile + * + */ + +#define PT_orig_r10 0 /* offsetof(struct pt_regs, orig_r10) */ +#define PT_r13 56 /* offsetof(struct pt_regs, r13) */ +#define PT_r12 52 /* offsetof(struct pt_regs, r12) */ +#define PT_r11 48 /* offsetof(struct pt_regs, r11) */ +#define PT_r10 44 /* offsetof(struct pt_regs, r10) */ +#define PT_r9 40 /* offsetof(struct pt_regs, r9) */ +#define PT_acr 60 /* offsetof(struct pt_regs, acr) */ +#define PT_srs 64 /* offsetof(struct pt_regs, srs) */ +#define PT_mof 68 /* offsetof(struct pt_regs, mof) */ +#define PT_ccs 76 /* offsetof(struct pt_regs, ccs) */ +#define PT_srp 80 /* offsetof(struct pt_regs, srp) */ + +#define TI_task 0 /* offsetof(struct thread_info, task) */ +#define TI_flags 8 /* offsetof(struct thread_info, flags) */ +#define TI_preempt_count 16 /* offsetof(struct thread_info, preempt_count) */ + +#define THREAD_ksp 0 /* offsetof(struct thread_struct, ksp) */ +#define THREAD_usp 4 /* offsetof(struct thread_struct, usp) */ +#define THREAD_ccs 8 /* offsetof(struct thread_struct, ccs) */ + +#define TASK_pid 151 /* offsetof(struct task_struct, pid) */ + +#define LCLONE_VM 256 /* CLONE_VM */ +#define LCLONE_UNTRACED 8388608 /* CLONE_UNTRACED */ + +#endif diff --git a/arch/cris/include/arch-v32/arch/page.h b/arch/cris/include/arch-v32/arch/page.h new file mode 100644 index 000000000000..20f1b4806bfe --- /dev/null +++ b/arch/cris/include/arch-v32/arch/page.h @@ -0,0 +1,27 @@ +#ifndef _ASM_CRIS_ARCH_PAGE_H +#define _ASM_CRIS_ARCH_PAGE_H + + +#ifdef __KERNEL__ + +#define PAGE_OFFSET KSEG_C /* kseg_c is mapped to physical ram. */ + +/* + * Macros to convert between physical and virtual addresses. By stripping a + * selected bit it's possible to convert between KSEG_x and 0x40000000 where the + * DRAM really resides. DRAM is virtually at 0xc. + */ +#ifndef CONFIG_ETRAX_VCS_SIM +#define __pa(x) ((unsigned long)(x) & 0x7fffffff) +#define __va(x) ((void *)((unsigned long)(x) | 0x80000000)) +#else +#define __pa(x) ((unsigned long)(x) & 0x3fffffff) +#define __va(x) ((void *)((unsigned long)(x) | 0xc0000000)) +#endif + +#define VM_STACK_DEFAULT_FLAGS (VM_READ | VM_WRITE | \ + VM_MAYREAD | VM_MAYWRITE) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_CRIS_ARCH_PAGE_H */ diff --git a/arch/cris/include/arch-v32/arch/pgtable.h b/arch/cris/include/arch-v32/arch/pgtable.h new file mode 100644 index 000000000000..08cb7ff7e4e7 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/pgtable.h @@ -0,0 +1,9 @@ +#ifndef _ASM_CRIS_ARCH_PGTABLE_H +#define _ASM_CRIS_ARCH_PGTABLE_H + +/* Define the kernels virtual memory area. */ +#define VMALLOC_START KSEG_D +#define VMALLOC_END KSEG_E +#define VMALLOC_VMADDR(x) ((unsigned long)(x)) + +#endif /* _ASM_CRIS_ARCH_PGTABLE_H */ diff --git a/arch/cris/include/arch-v32/arch/processor.h b/arch/cris/include/arch-v32/arch/processor.h new file mode 100644 index 000000000000..f80b47790ca6 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/processor.h @@ -0,0 +1,59 @@ +#ifndef _ASM_CRIS_ARCH_PROCESSOR_H +#define _ASM_CRIS_ARCH_PROCESSOR_H + + +/* Return current instruction pointer. */ +#define current_text_addr() \ + ({void *pc; __asm__ __volatile__ ("lapcq .,%0" : "=rm" (pc)); pc;}) + +/* + * Since CRIS doesn't do hardware task-switching this hasn't really anything to + * do with the proccessor itself, it's just here for legacy reasons. This is + * used when task-switching using _resume defined in entry.S. The offsets here + * are hardcoded into _resume, so if this struct is changed, entry.S needs to be + * changed as well. + */ +struct thread_struct { + unsigned long ksp; /* Kernel stack pointer. */ + unsigned long usp; /* User stack pointer. */ + unsigned long ccs; /* Saved flags register. */ +}; + +/* + * User-space process size. This is hardcoded into a few places, so don't + * changed it unless everything's clear! + */ +#ifndef CONFIG_ETRAX_VCS_SIM +#define TASK_SIZE (0xB0000000UL) +#else +#define TASK_SIZE (0xA0000000UL) +#endif + +/* CCS I=1, enable interrupts. */ +#define INIT_THREAD { 0, 0, (1 << I_CCS_BITNR) } + +#define KSTK_EIP(tsk) \ +({ \ + unsigned long eip = 0; \ + unsigned long regs = (unsigned long)task_pt_regs(tsk); \ + if (regs > PAGE_SIZE && virt_addr_valid(regs)) \ + eip = ((struct pt_regs *)regs)->erp; \ + eip; \ +}) + +/* + * Give the thread a program location, set user-mode and switch user + * stackpointer. + */ +#define start_thread(regs, ip, usp) \ +do { \ + set_fs(USER_DS); \ + regs->erp = ip; \ + regs->ccs |= 1 << (U_CCS_BITNR + CCS_SHIFT); \ + wrusp(usp); \ +} while(0) + +/* Nothing special to do for v32 when handling a kernel bus fault fixup. */ +#define arch_fixup(regs) {}; + +#endif /* _ASM_CRIS_ARCH_PROCESSOR_H */ diff --git a/arch/cris/include/arch-v32/arch/ptrace.h b/arch/cris/include/arch-v32/arch/ptrace.h new file mode 100644 index 000000000000..41f4e8662bc2 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/ptrace.h @@ -0,0 +1,118 @@ +#ifndef _CRIS_ARCH_PTRACE_H +#define _CRIS_ARCH_PTRACE_H + +/* Register numbers in the ptrace system call interface */ + +#define PT_ORIG_R10 0 +#define PT_R0 1 +#define PT_R1 2 +#define PT_R2 3 +#define PT_R3 4 +#define PT_R4 5 +#define PT_R5 6 +#define PT_R6 7 +#define PT_R7 8 +#define PT_R8 9 +#define PT_R9 10 +#define PT_R10 11 +#define PT_R11 12 +#define PT_R12 13 +#define PT_R13 14 +#define PT_ACR 15 +#define PT_SRS 16 +#define PT_MOF 17 +#define PT_SPC 18 +#define PT_CCS 19 +#define PT_SRP 20 +#define PT_ERP 21 /* This is actually the debugged process' PC */ +#define PT_EXS 22 +#define PT_EDA 23 +#define PT_USP 24 /* special case - USP is not in the pt_regs */ +#define PT_PPC 25 /* special case - pseudo PC */ +#define PT_BP 26 /* Base number for BP registers. */ +#define PT_BP_CTRL 26 /* BP control register. */ +#define PT_MAX 40 + +/* Condition code bit numbers. */ +#define C_CCS_BITNR 0 +#define V_CCS_BITNR 1 +#define Z_CCS_BITNR 2 +#define N_CCS_BITNR 3 +#define X_CCS_BITNR 4 +#define I_CCS_BITNR 5 +#define U_CCS_BITNR 6 +#define P_CCS_BITNR 7 +#define R_CCS_BITNR 8 +#define S_CCS_BITNR 9 +#define M_CCS_BITNR 30 +#define Q_CCS_BITNR 31 +#define CCS_SHIFT 10 /* Shift count for each level in CCS */ + +/* pt_regs not only specifices the format in the user-struct during + * ptrace but is also the frame format used in the kernel prologue/epilogues + * themselves + */ + +struct pt_regs { + unsigned long orig_r10; + /* pushed by movem r13, [sp] in SAVE_ALL. */ + unsigned long r0; + unsigned long r1; + unsigned long r2; + unsigned long r3; + unsigned long r4; + unsigned long r5; + unsigned long r6; + unsigned long r7; + unsigned long r8; + unsigned long r9; + unsigned long r10; + unsigned long r11; + unsigned long r12; + unsigned long r13; + unsigned long acr; + unsigned long srs; + unsigned long mof; + unsigned long spc; + unsigned long ccs; + unsigned long srp; + unsigned long erp; /* This is actually the debugged process' PC */ + /* For debugging purposes; saved only when needed. */ + unsigned long exs; + unsigned long eda; +}; + +/* switch_stack is the extra stuff pushed onto the stack in _resume (entry.S) + * when doing a context-switch. it is used (apart from in resume) when a new + * thread is made and we need to make _resume (which is starting it for the + * first time) realise what is going on. + * + * Actually, the use is very close to the thread struct (TSS) in that both the + * switch_stack and the TSS are used to keep thread stuff when switching in + * _resume. + */ + +struct switch_stack { + unsigned long r0; + unsigned long r1; + unsigned long r2; + unsigned long r3; + unsigned long r4; + unsigned long r5; + unsigned long r6; + unsigned long r7; + unsigned long r8; + unsigned long r9; + unsigned long return_ip; /* ip that _resume will return to */ +}; + +#ifdef __KERNEL__ + +#define user_mode(regs) (((regs)->ccs & (1 << (U_CCS_BITNR + CCS_SHIFT))) != 0) +#define instruction_pointer(regs) ((regs)->erp) +extern void show_regs(struct pt_regs *); +#define profile_pc(regs) instruction_pointer(regs) + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/cris/include/arch-v32/arch/spinlock.h b/arch/cris/include/arch-v32/arch/spinlock.h new file mode 100644 index 000000000000..0d5709b983a1 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/spinlock.h @@ -0,0 +1,129 @@ +#ifndef __ASM_ARCH_SPINLOCK_H +#define __ASM_ARCH_SPINLOCK_H + +#include + +#define RW_LOCK_BIAS 0x01000000 + +extern void cris_spin_unlock(void *l, int val); +extern void cris_spin_lock(void *l); +extern int cris_spin_trylock(void *l); + +static inline int __raw_spin_is_locked(raw_spinlock_t *x) +{ + return *(volatile signed char *)(&(x)->slock) <= 0; +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + __asm__ volatile ("move.d %1,%0" \ + : "=m" (lock->slock) \ + : "r" (1) \ + : "memory"); +} + +static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) +{ + while (__raw_spin_is_locked(lock)) + cpu_relax(); +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + return cris_spin_trylock((void *)&lock->slock); +} + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + cris_spin_lock((void *)&lock->slock); +} + +static inline void +__raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) +{ + __raw_spin_lock(lock); +} + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + * + */ + +static inline int __raw_read_can_lock(raw_rwlock_t *x) +{ + return (int)(x)->lock > 0; +} + +static inline int __raw_write_can_lock(raw_rwlock_t *x) +{ + return (x)->lock == RW_LOCK_BIAS; +} + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + __raw_spin_lock(&rw->slock); + while (rw->lock == 0); + rw->lock--; + __raw_spin_unlock(&rw->slock); +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + __raw_spin_lock(&rw->slock); + while (rw->lock != RW_LOCK_BIAS); + rw->lock == 0; + __raw_spin_unlock(&rw->slock); +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + __raw_spin_lock(&rw->slock); + rw->lock++; + __raw_spin_unlock(&rw->slock); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + __raw_spin_lock(&rw->slock); + while (rw->lock != RW_LOCK_BIAS); + rw->lock == RW_LOCK_BIAS; + __raw_spin_unlock(&rw->slock); +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + int ret = 0; + __raw_spin_lock(&rw->slock); + if (rw->lock != 0) { + rw->lock--; + ret = 1; + } + __raw_spin_unlock(&rw->slock); + return ret; +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + int ret = 0; + __raw_spin_lock(&rw->slock); + if (rw->lock == RW_LOCK_BIAS) { + rw->lock == 0; + ret = 1; + } + __raw_spin_unlock(&rw->slock); + return 1; +} + + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* __ASM_ARCH_SPINLOCK_H */ diff --git a/arch/cris/include/arch-v32/arch/system.h b/arch/cris/include/arch-v32/arch/system.h new file mode 100644 index 000000000000..6ca90f1f110a --- /dev/null +++ b/arch/cris/include/arch-v32/arch/system.h @@ -0,0 +1,69 @@ +#ifndef _ASM_CRIS_ARCH_SYSTEM_H +#define _ASM_CRIS_ARCH_SYSTEM_H + + +/* Read the CPU version register. */ +static inline unsigned long rdvr(void) +{ + unsigned char vr; + + __asm__ __volatile__ ("move $vr, %0" : "=rm" (vr)); + return vr; +} + +#define cris_machine_name "crisv32" + +/* Read the user-mode stack pointer. */ +static inline unsigned long rdusp(void) +{ + unsigned long usp; + + __asm__ __volatile__ ("move $usp, %0" : "=rm" (usp)); + return usp; +} + +/* Read the current stack pointer. */ +static inline unsigned long rdsp(void) +{ + unsigned long sp; + + __asm__ __volatile__ ("move.d $sp, %0" : "=rm" (sp)); + return sp; +} + +/* Write the user-mode stack pointer. */ +#define wrusp(usp) __asm__ __volatile__ ("move %0, $usp" : : "rm" (usp)) + +#define nop() __asm__ __volatile__ ("nop"); + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((unsigned long) (x),(ptr),sizeof(*(ptr)))) + +#define tas(ptr) (xchg((ptr),1)) + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((struct __xchg_dummy *)(x)) + +/* Used for interrupt control. */ +#define local_save_flags(x) \ + __asm__ __volatile__ ("move $ccs, %0" : "=rm" (x) : : "memory"); + +#define local_irq_restore(x) \ + __asm__ __volatile__ ("move %0, $ccs" : : "rm" (x) : "memory"); + +#define local_irq_disable() __asm__ __volatile__ ("di" : : : "memory"); +#define local_irq_enable() __asm__ __volatile__ ("ei" : : : "memory"); + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + \ + local_save_flags(flags);\ + !(flags & (1 << I_CCS_BITNR)); \ +}) + +/* Used for spinlocks, etc. */ +#define local_irq_save(x) \ + __asm__ __volatile__ ("move $ccs, %0\n\tdi" : "=rm" (x) : : "memory"); + +#endif /* _ASM_CRIS_ARCH_SYSTEM_H */ diff --git a/arch/cris/include/arch-v32/arch/thread_info.h b/arch/cris/include/arch-v32/arch/thread_info.h new file mode 100644 index 000000000000..d6936956a3c6 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/thread_info.h @@ -0,0 +1,13 @@ +#ifndef _ASM_CRIS_ARCH_THREAD_INFO_H +#define _ASM_CRIS_ARCH_THREAD_INFO_H + +/* Return a thread_info struct. */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + + __asm__ __volatile__ ("and.d $sp, %0" : "=r" (ti) : "0" (~8191UL)); + return ti; +} + +#endif /* _ASM_CRIS_ARCH_THREAD_INFO_H */ diff --git a/arch/cris/include/arch-v32/arch/timex.h b/arch/cris/include/arch-v32/arch/timex.h new file mode 100644 index 000000000000..2591d3c5ed9d --- /dev/null +++ b/arch/cris/include/arch-v32/arch/timex.h @@ -0,0 +1,31 @@ +#ifndef _ASM_CRIS_ARCH_TIMEX_H +#define _ASM_CRIS_ARCH_TIMEX_H + +#include +#include +#include + +/* + * The clock runs at 100MHz, we divide it by 1000000. If you change anything + * here you must check time.c as well. + */ + +#define CLOCK_TICK_RATE 100000000 /* Underlying frequency of the HZ timer */ + +/* The timer0 values gives 10 ns resolution but interrupts at HZ. */ +#define TIMER0_FREQ (CLOCK_TICK_RATE) +#define TIMER0_DIV (TIMER0_FREQ/(HZ)) + +/* Convert the value in step of 10 ns to 1us without overflow: */ +#define GET_JIFFIES_USEC() \ + ((TIMER0_DIV - REG_RD(timer, regi_timer0, r_tmr0_data)) / 100) + +extern unsigned long get_ns_in_jiffie(void); + +static inline unsigned long get_us_in_jiffie_highres(void) +{ + return get_ns_in_jiffie() / 1000; +} + +#endif + diff --git a/arch/cris/include/arch-v32/arch/tlb.h b/arch/cris/include/arch-v32/arch/tlb.h new file mode 100644 index 000000000000..4effb1253660 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/tlb.h @@ -0,0 +1,14 @@ +#ifndef _CRIS_ARCH_TLB_H +#define _CRIS_ARCH_TLB_H + +/* + * The TLB is a 64-entry cache. Each entry has a 8-bit page_id that is used + * to store the "process" it belongs to (=> fast mm context switch). The + * last page_id is never used so we can make TLB entries that never matches. + */ +#define NUM_TLB_ENTRIES 64 +#define NUM_PAGEID 256 +#define INVALID_PAGEID 255 +#define NO_CONTEXT -1 + +#endif /* _CRIS_ARCH_TLB_H */ diff --git a/arch/cris/include/arch-v32/arch/uaccess.h b/arch/cris/include/arch-v32/arch/uaccess.h new file mode 100644 index 000000000000..6b207f1b6622 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/uaccess.h @@ -0,0 +1,748 @@ +/* + * Authors: Hans-Peter Nilsson (hp@axis.com) + * + */ +#ifndef _CRIS_ARCH_UACCESS_H +#define _CRIS_ARCH_UACCESS_H + +/* + * We don't tell gcc that we are accessing memory, but this is OK + * because we do not write to any memory gcc knows about, so there + * are no aliasing issues. + * + * Note that PC at a fault is the address *at* the faulting + * instruction for CRISv32. + */ +#define __put_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "2: "op" %1,[%2]\n" \ + "4:\n" \ + " .section .fixup,\"ax\"\n" \ + "3: move.d %3,%0\n" \ + " jump 4b\n" \ + " nop\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .dword 2b,3b\n" \ + " .previous\n" \ + : "=r" (err) \ + : "r" (x), "r" (addr), "g" (-EFAULT), "0" (err)) + +#define __put_user_asm_64(x, addr, err) do { \ + int dummy_for_put_user_asm_64_; \ + __asm__ __volatile__( \ + "2: move.d %M2,[%1+]\n" \ + "4: move.d %H2,[%1]\n" \ + "5:\n" \ + " .section .fixup,\"ax\"\n" \ + "3: move.d %4,%0\n" \ + " jump 5b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .dword 2b,3b\n" \ + " .dword 4b,3b\n" \ + " .previous\n" \ + : "=r" (err), "=b" (dummy_for_put_user_asm_64_) \ + : "r" (x), "1" (addr), "g" (-EFAULT), \ + "0" (err)); \ + } while (0) + +/* See comment before __put_user_asm. */ + +#define __get_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "2: "op" [%2],%1\n" \ + "4:\n" \ + " .section .fixup,\"ax\"\n" \ + "3: move.d %3,%0\n" \ + " jump 4b\n" \ + " moveq 0,%1\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .dword 2b,3b\n" \ + " .previous\n" \ + : "=r" (err), "=r" (x) \ + : "r" (addr), "g" (-EFAULT), "0" (err)) + +#define __get_user_asm_64(x, addr, err) do { \ + int dummy_for_get_user_asm_64_; \ + __asm__ __volatile__( \ + "2: move.d [%2+],%M1\n" \ + "4: move.d [%2],%H1\n" \ + "5:\n" \ + " .section .fixup,\"ax\"\n" \ + "3: move.d %4,%0\n" \ + " jump 5b\n" \ + " moveq 0,%1\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .dword 2b,3b\n" \ + " .dword 4b,3b\n" \ + " .previous\n" \ + : "=r" (err), "=r" (x), \ + "=b" (dummy_for_get_user_asm_64_) \ + : "2" (addr), "g" (-EFAULT), "0" (err));\ + } while (0) + +/* + * Copy a null terminated string from userspace. + * + * Must return: + * -EFAULT for an exception + * count if we hit the buffer limit + * bytes copied if we hit a null byte + * (without the null byte) + */ +static inline long +__do_strncpy_from_user(char *dst, const char *src, long count) +{ + long res; + + if (count == 0) + return 0; + + /* + * Currently, in 2.4.0-test9, most ports use a simple byte-copy loop. + * So do we. + * + * This code is deduced from: + * + * char tmp2; + * long tmp1, tmp3; + * tmp1 = count; + * while ((*dst++ = (tmp2 = *src++)) != 0 + * && --tmp1) + * ; + * + * res = count - tmp1; + * + * with tweaks. + */ + + __asm__ __volatile__ ( + " move.d %3,%0\n" + "5: move.b [%2+],$acr\n" + "1: beq 2f\n" + " move.b $acr,[%1+]\n" + + " subq 1,%0\n" + "2: bne 1b\n" + " move.b [%2+],$acr\n" + + " sub.d %3,%0\n" + " neg.d %0,%0\n" + "3:\n" + " .section .fixup,\"ax\"\n" + "4: move.d %7,%0\n" + " jump 3b\n" + " nop\n" + + /* The address for a fault at the first move is trivial. + The address for a fault at the second move is that of + the preceding branch insn, since the move insn is in + its delay-slot. That address is also a branch + target. Just so you don't get confused... */ + " .previous\n" + " .section __ex_table,\"a\"\n" + " .dword 5b,4b\n" + " .dword 2b,4b\n" + " .previous" + : "=r" (res), "=b" (dst), "=b" (src), "=r" (count) + : "3" (count), "1" (dst), "2" (src), "g" (-EFAULT) + : "acr"); + + return res; +} + +/* A few copy asms to build up the more complex ones from. + + Note again, a post-increment is performed regardless of whether a bus + fault occurred in that instruction, and PC for a faulted insn is the + address for the insn, or for the preceding branch when in a delay-slot. */ + +#define __asm_copy_user_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm__ __volatile__ ( \ + COPY \ + "1:\n" \ + " .section .fixup,\"ax\"\n" \ + FIXUP \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + TENTRY \ + " .previous\n" \ + : "=b" (to), "=b" (from), "=r" (ret) \ + : "0" (to), "1" (from), "2" (ret) \ + : "acr", "memory") + +#define __asm_copy_from_user_1(to, from, ret) \ + __asm_copy_user_cont(to, from, ret, \ + "2: move.b [%1+],$acr\n" \ + " move.b $acr,[%0+]\n", \ + "3: addq 1,%2\n" \ + " jump 1b\n" \ + " clear.b [%0+]\n", \ + " .dword 2b,3b\n") + +#define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_user_cont(to, from, ret, \ + COPY \ + "2: move.w [%1+],$acr\n" \ + " move.w $acr,[%0+]\n", \ + FIXUP \ + "3: addq 2,%2\n" \ + " jump 1b\n" \ + " clear.w [%0+]\n", \ + TENTRY \ + " .dword 2b,3b\n") + +#define __asm_copy_from_user_2(to, from, ret) \ + __asm_copy_from_user_2x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_3(to, from, ret) \ + __asm_copy_from_user_2x_cont(to, from, ret, \ + "4: move.b [%1+],$acr\n" \ + " move.b $acr,[%0+]\n", \ + "5: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 4b,5b\n") + +#define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_user_cont(to, from, ret, \ + COPY \ + "2: move.d [%1+],$acr\n" \ + " move.d $acr,[%0+]\n", \ + FIXUP \ + "3: addq 4,%2\n" \ + " jump 1b\n" \ + " clear.d [%0+]\n", \ + TENTRY \ + " .dword 2b,3b\n") + +#define __asm_copy_from_user_4(to, from, ret) \ + __asm_copy_from_user_4x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_5(to, from, ret) \ + __asm_copy_from_user_4x_cont(to, from, ret, \ + "4: move.b [%1+],$acr\n" \ + " move.b $acr,[%0+]\n", \ + "5: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 4b,5b\n") + +#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_4x_cont(to, from, ret, \ + COPY \ + "4: move.w [%1+],$acr\n" \ + " move.w $acr,[%0+]\n", \ + FIXUP \ + "5: addq 2,%2\n" \ + " clear.w [%0+]\n", \ + TENTRY \ + " .dword 4b,5b\n") + +#define __asm_copy_from_user_6(to, from, ret) \ + __asm_copy_from_user_6x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_7(to, from, ret) \ + __asm_copy_from_user_6x_cont(to, from, ret, \ + "6: move.b [%1+],$acr\n" \ + " move.b $acr,[%0+]\n", \ + "7: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 6b,7b\n") + +#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_4x_cont(to, from, ret, \ + COPY \ + "4: move.d [%1+],$acr\n" \ + " move.d $acr,[%0+]\n", \ + FIXUP \ + "5: addq 4,%2\n" \ + " clear.d [%0+]\n", \ + TENTRY \ + " .dword 4b,5b\n") + +#define __asm_copy_from_user_8(to, from, ret) \ + __asm_copy_from_user_8x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_9(to, from, ret) \ + __asm_copy_from_user_8x_cont(to, from, ret, \ + "6: move.b [%1+],$acr\n" \ + " move.b $acr,[%0+]\n", \ + "7: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 6b,7b\n") + +#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_8x_cont(to, from, ret, \ + COPY \ + "6: move.w [%1+],$acr\n" \ + " move.w $acr,[%0+]\n", \ + FIXUP \ + "7: addq 2,%2\n" \ + " clear.w [%0+]\n", \ + TENTRY \ + " .dword 6b,7b\n") + +#define __asm_copy_from_user_10(to, from, ret) \ + __asm_copy_from_user_10x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_11(to, from, ret) \ + __asm_copy_from_user_10x_cont(to, from, ret, \ + "8: move.b [%1+],$acr\n" \ + " move.b $acr,[%0+]\n", \ + "9: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 8b,9b\n") + +#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_8x_cont(to, from, ret, \ + COPY \ + "6: move.d [%1+],$acr\n" \ + " move.d $acr,[%0+]\n", \ + FIXUP \ + "7: addq 4,%2\n" \ + " clear.d [%0+]\n", \ + TENTRY \ + " .dword 6b,7b\n") + +#define __asm_copy_from_user_12(to, from, ret) \ + __asm_copy_from_user_12x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_13(to, from, ret) \ + __asm_copy_from_user_12x_cont(to, from, ret, \ + "8: move.b [%1+],$acr\n" \ + " move.b $acr,[%0+]\n", \ + "9: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 8b,9b\n") + +#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_12x_cont(to, from, ret, \ + COPY \ + "8: move.w [%1+],$acr\n" \ + " move.w $acr,[%0+]\n", \ + FIXUP \ + "9: addq 2,%2\n" \ + " clear.w [%0+]\n", \ + TENTRY \ + " .dword 8b,9b\n") + +#define __asm_copy_from_user_14(to, from, ret) \ + __asm_copy_from_user_14x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_15(to, from, ret) \ + __asm_copy_from_user_14x_cont(to, from, ret, \ + "10: move.b [%1+],$acr\n" \ + " move.b $acr,[%0+]\n", \ + "11: addq 1,%2\n" \ + " clear.b [%0+]\n", \ + " .dword 10b,11b\n") + +#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_12x_cont(to, from, ret, \ + COPY \ + "8: move.d [%1+],$acr\n" \ + " move.d $acr,[%0+]\n", \ + FIXUP \ + "9: addq 4,%2\n" \ + " clear.d [%0+]\n", \ + TENTRY \ + " .dword 8b,9b\n") + +#define __asm_copy_from_user_16(to, from, ret) \ + __asm_copy_from_user_16x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_16x_cont(to, from, ret, \ + COPY \ + "10: move.d [%1+],$acr\n" \ + " move.d $acr,[%0+]\n", \ + FIXUP \ + "11: addq 4,%2\n" \ + " clear.d [%0+]\n", \ + TENTRY \ + " .dword 10b,11b\n") + +#define __asm_copy_from_user_20(to, from, ret) \ + __asm_copy_from_user_20x_cont(to, from, ret, "", "", "") + +#define __asm_copy_from_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_from_user_20x_cont(to, from, ret, \ + COPY \ + "12: move.d [%1+],$acr\n" \ + " move.d $acr,[%0+]\n", \ + FIXUP \ + "13: addq 4,%2\n" \ + " clear.d [%0+]\n", \ + TENTRY \ + " .dword 12b,13b\n") + +#define __asm_copy_from_user_24(to, from, ret) \ + __asm_copy_from_user_24x_cont(to, from, ret, "", "", "") + +/* And now, the to-user ones. */ + +#define __asm_copy_to_user_1(to, from, ret) \ + __asm_copy_user_cont(to, from, ret, \ + " move.b [%1+],$acr\n" \ + "2: move.b $acr,[%0+]\n", \ + "3: jump 1b\n" \ + " addq 1,%2\n", \ + " .dword 2b,3b\n") + +#define __asm_copy_to_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_user_cont(to, from, ret, \ + COPY \ + " move.w [%1+],$acr\n" \ + "2: move.w $acr,[%0+]\n", \ + FIXUP \ + "3: jump 1b\n" \ + " addq 2,%2\n", \ + TENTRY \ + " .dword 2b,3b\n") + +#define __asm_copy_to_user_2(to, from, ret) \ + __asm_copy_to_user_2x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_3(to, from, ret) \ + __asm_copy_to_user_2x_cont(to, from, ret, \ + " move.b [%1+],$acr\n" \ + "4: move.b $acr,[%0+]\n", \ + "5: addq 1,%2\n", \ + " .dword 4b,5b\n") + +#define __asm_copy_to_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_user_cont(to, from, ret, \ + COPY \ + " move.d [%1+],$acr\n" \ + "2: move.d $acr,[%0+]\n", \ + FIXUP \ + "3: jump 1b\n" \ + " addq 4,%2\n", \ + TENTRY \ + " .dword 2b,3b\n") + +#define __asm_copy_to_user_4(to, from, ret) \ + __asm_copy_to_user_4x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_5(to, from, ret) \ + __asm_copy_to_user_4x_cont(to, from, ret, \ + " move.b [%1+],$acr\n" \ + "4: move.b $acr,[%0+]\n", \ + "5: addq 1,%2\n", \ + " .dword 4b,5b\n") + +#define __asm_copy_to_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_4x_cont(to, from, ret, \ + COPY \ + " move.w [%1+],$acr\n" \ + "4: move.w $acr,[%0+]\n", \ + FIXUP \ + "5: addq 2,%2\n", \ + TENTRY \ + " .dword 4b,5b\n") + +#define __asm_copy_to_user_6(to, from, ret) \ + __asm_copy_to_user_6x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_7(to, from, ret) \ + __asm_copy_to_user_6x_cont(to, from, ret, \ + " move.b [%1+],$acr\n" \ + "6: move.b $acr,[%0+]\n", \ + "7: addq 1,%2\n", \ + " .dword 6b,7b\n") + +#define __asm_copy_to_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_4x_cont(to, from, ret, \ + COPY \ + " move.d [%1+],$acr\n" \ + "4: move.d $acr,[%0+]\n", \ + FIXUP \ + "5: addq 4,%2\n", \ + TENTRY \ + " .dword 4b,5b\n") + +#define __asm_copy_to_user_8(to, from, ret) \ + __asm_copy_to_user_8x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_9(to, from, ret) \ + __asm_copy_to_user_8x_cont(to, from, ret, \ + " move.b [%1+],$acr\n" \ + "6: move.b $acr,[%0+]\n", \ + "7: addq 1,%2\n", \ + " .dword 6b,7b\n") + +#define __asm_copy_to_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_8x_cont(to, from, ret, \ + COPY \ + " move.w [%1+],$acr\n" \ + "6: move.w $acr,[%0+]\n", \ + FIXUP \ + "7: addq 2,%2\n", \ + TENTRY \ + " .dword 6b,7b\n") + +#define __asm_copy_to_user_10(to, from, ret) \ + __asm_copy_to_user_10x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_11(to, from, ret) \ + __asm_copy_to_user_10x_cont(to, from, ret, \ + " move.b [%1+],$acr\n" \ + "8: move.b $acr,[%0+]\n", \ + "9: addq 1,%2\n", \ + " .dword 8b,9b\n") + +#define __asm_copy_to_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_8x_cont(to, from, ret, \ + COPY \ + " move.d [%1+],$acr\n" \ + "6: move.d $acr,[%0+]\n", \ + FIXUP \ + "7: addq 4,%2\n", \ + TENTRY \ + " .dword 6b,7b\n") + +#define __asm_copy_to_user_12(to, from, ret) \ + __asm_copy_to_user_12x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_13(to, from, ret) \ + __asm_copy_to_user_12x_cont(to, from, ret, \ + " move.b [%1+],$acr\n" \ + "8: move.b $acr,[%0+]\n", \ + "9: addq 1,%2\n", \ + " .dword 8b,9b\n") + +#define __asm_copy_to_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_12x_cont(to, from, ret, \ + COPY \ + " move.w [%1+],$acr\n" \ + "8: move.w $acr,[%0+]\n", \ + FIXUP \ + "9: addq 2,%2\n", \ + TENTRY \ + " .dword 8b,9b\n") + +#define __asm_copy_to_user_14(to, from, ret) \ + __asm_copy_to_user_14x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_15(to, from, ret) \ + __asm_copy_to_user_14x_cont(to, from, ret, \ + " move.b [%1+],$acr\n" \ + "10: move.b $acr,[%0+]\n", \ + "11: addq 1,%2\n", \ + " .dword 10b,11b\n") + +#define __asm_copy_to_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_12x_cont(to, from, ret, \ + COPY \ + " move.d [%1+],$acr\n" \ + "8: move.d $acr,[%0+]\n", \ + FIXUP \ + "9: addq 4,%2\n", \ + TENTRY \ + " .dword 8b,9b\n") + +#define __asm_copy_to_user_16(to, from, ret) \ + __asm_copy_to_user_16x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_16x_cont(to, from, ret, \ + COPY \ + " move.d [%1+],$acr\n" \ + "10: move.d $acr,[%0+]\n", \ + FIXUP \ + "11: addq 4,%2\n", \ + TENTRY \ + " .dword 10b,11b\n") + +#define __asm_copy_to_user_20(to, from, ret) \ + __asm_copy_to_user_20x_cont(to, from, ret, "", "", "") + +#define __asm_copy_to_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ + __asm_copy_to_user_20x_cont(to, from, ret, \ + COPY \ + " move.d [%1+],$acr\n" \ + "12: move.d $acr,[%0+]\n", \ + FIXUP \ + "13: addq 4,%2\n", \ + TENTRY \ + " .dword 12b,13b\n") + +#define __asm_copy_to_user_24(to, from, ret) \ + __asm_copy_to_user_24x_cont(to, from, ret, "", "", "") + +/* Define a few clearing asms with exception handlers. */ + +/* This frame-asm is like the __asm_copy_user_cont one, but has one less + input. */ + +#define __asm_clear(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm__ __volatile__ ( \ + CLEAR \ + "1:\n" \ + " .section .fixup,\"ax\"\n" \ + FIXUP \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + TENTRY \ + " .previous" \ + : "=b" (to), "=r" (ret) \ + : "0" (to), "1" (ret) \ + : "memory") + +#define __asm_clear_1(to, ret) \ + __asm_clear(to, ret, \ + "2: clear.b [%0+]\n", \ + "3: jump 1b\n" \ + " addq 1,%1\n", \ + " .dword 2b,3b\n") + +#define __asm_clear_2(to, ret) \ + __asm_clear(to, ret, \ + "2: clear.w [%0+]\n", \ + "3: jump 1b\n" \ + " addq 2,%1\n", \ + " .dword 2b,3b\n") + +#define __asm_clear_3(to, ret) \ + __asm_clear(to, ret, \ + "2: clear.w [%0+]\n" \ + "3: clear.b [%0+]\n", \ + "4: addq 2,%1\n" \ + "5: jump 1b\n" \ + " addq 1,%1\n", \ + " .dword 2b,4b\n" \ + " .dword 3b,5b\n") + +#define __asm_clear_4x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear(to, ret, \ + CLEAR \ + "2: clear.d [%0+]\n", \ + FIXUP \ + "3: jump 1b\n" \ + " addq 4,%1\n", \ + TENTRY \ + " .dword 2b,3b\n") + +#define __asm_clear_4(to, ret) \ + __asm_clear_4x_cont(to, ret, "", "", "") + +#define __asm_clear_8x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear_4x_cont(to, ret, \ + CLEAR \ + "4: clear.d [%0+]\n", \ + FIXUP \ + "5: addq 4,%1\n", \ + TENTRY \ + " .dword 4b,5b\n") + +#define __asm_clear_8(to, ret) \ + __asm_clear_8x_cont(to, ret, "", "", "") + +#define __asm_clear_12x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear_8x_cont(to, ret, \ + CLEAR \ + "6: clear.d [%0+]\n", \ + FIXUP \ + "7: addq 4,%1\n", \ + TENTRY \ + " .dword 6b,7b\n") + +#define __asm_clear_12(to, ret) \ + __asm_clear_12x_cont(to, ret, "", "", "") + +#define __asm_clear_16x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear_12x_cont(to, ret, \ + CLEAR \ + "8: clear.d [%0+]\n", \ + FIXUP \ + "9: addq 4,%1\n", \ + TENTRY \ + " .dword 8b,9b\n") + +#define __asm_clear_16(to, ret) \ + __asm_clear_16x_cont(to, ret, "", "", "") + +#define __asm_clear_20x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear_16x_cont(to, ret, \ + CLEAR \ + "10: clear.d [%0+]\n", \ + FIXUP \ + "11: addq 4,%1\n", \ + TENTRY \ + " .dword 10b,11b\n") + +#define __asm_clear_20(to, ret) \ + __asm_clear_20x_cont(to, ret, "", "", "") + +#define __asm_clear_24x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ + __asm_clear_20x_cont(to, ret, \ + CLEAR \ + "12: clear.d [%0+]\n", \ + FIXUP \ + "13: addq 4,%1\n", \ + TENTRY \ + " .dword 12b,13b\n") + +#define __asm_clear_24(to, ret) \ + __asm_clear_24x_cont(to, ret, "", "", "") + +/* + * Return the size of a string (including the ending 0) + * + * Return length of string in userspace including terminating 0 + * or 0 for error. Return a value greater than N if too long. + */ + +static inline long +strnlen_user(const char *s, long n) +{ + long res, tmp1; + + if (!access_ok(VERIFY_READ, s, 0)) + return 0; + + /* + * This code is deduced from: + * + * tmp1 = n; + * while (tmp1-- > 0 && *s++) + * ; + * + * res = n - tmp1; + * + * (with tweaks). + */ + + __asm__ __volatile__ ( + " move.d %1,$acr\n" + " cmpq 0,$acr\n" + "0:\n" + " ble 1f\n" + " subq 1,$acr\n" + + "4: test.b [%0+]\n" + " bne 0b\n" + " cmpq 0,$acr\n" + "1:\n" + " move.d %1,%0\n" + " sub.d $acr,%0\n" + "2:\n" + " .section .fixup,\"ax\"\n" + + "3: jump 2b\n" + " clear.d %0\n" + + " .previous\n" + " .section __ex_table,\"a\"\n" + " .dword 4b,3b\n" + " .previous\n" + : "=r" (res), "=r" (tmp1) + : "0" (s), "1" (n) + : "acr"); + + return res; +} + +#endif diff --git a/arch/cris/include/arch-v32/arch/unistd.h b/arch/cris/include/arch-v32/arch/unistd.h new file mode 100644 index 000000000000..0051114c63c7 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/unistd.h @@ -0,0 +1,155 @@ +#ifndef _ASM_CRIS_ARCH_UNISTD_H_ +#define _ASM_CRIS_ARCH_UNISTD_H_ + +/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */ +/* + * Don't remove the .ifnc tests; they are an insurance against + * any hard-to-spot gcc register allocation bugs. + */ +#define _syscall0(type,name) \ +type name(void) \ +{ \ + register long __a __asm__ ("r10"); \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1,$r10$r9\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_) \ + : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall1(type,name,type1,arg1) \ +type name(type1 arg1) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1,$r10$r9\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a) \ + : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall2(type,name,type1,arg1,type2,arg2) \ +type name(type1 arg1,type2 arg2) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __b __asm__ ("r11") = (long) arg2; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1%3,$r10$r9$r11\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b) \ + : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \ +type name(type1 arg1,type2 arg2,type3 arg3) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __b __asm__ ("r11") = (long) arg2; \ + register long __c __asm__ ("r12") = (long) arg3; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1%3%4,$r10$r9$r11$r12\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), "r" (__c) \ + : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ +type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __b __asm__ ("r11") = (long) arg2; \ + register long __c __asm__ ("r12") = (long) arg3; \ + register long __d __asm__ ("r13") = (long) arg4; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), \ + "r" (__c), "r" (__d)\ + : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ + type5,arg5) \ +type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __b __asm__ ("r11") = (long) arg2; \ + register long __c __asm__ ("r12") = (long) arg3; \ + register long __d __asm__ ("r13") = (long) arg4; \ + register long __e __asm__ ("mof") = (long) arg5; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1%3%4%5%6,$r10$r9$r11$r12$r13$mof\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), \ + "r" (__c), "r" (__d), "h" (__e) \ + : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ + type5,arg5,type6,arg6) \ +type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \ +{ \ + register long __a __asm__ ("r10") = (long) arg1; \ + register long __b __asm__ ("r11") = (long) arg2; \ + register long __c __asm__ ("r12") = (long) arg3; \ + register long __d __asm__ ("r13") = (long) arg4; \ + register long __e __asm__ ("mof") = (long) arg5; \ + register long __f __asm__ ("srp") = (long) arg6; \ + register long __n_ __asm__ ("r9") = (__NR_##name); \ + __asm__ __volatile__ (".ifnc %0%1%3%4%5%6%7,$r10$r9$r11$r12$r13$mof$srp\n\t" \ + ".err\n\t" \ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), \ + "r" (__c), "r" (__d), "h" (__e), "x" (__f) \ + : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +} + +#endif diff --git a/arch/cris/include/arch-v32/arch/user.h b/arch/cris/include/arch-v32/arch/user.h new file mode 100644 index 000000000000..03fa1f3c3c00 --- /dev/null +++ b/arch/cris/include/arch-v32/arch/user.h @@ -0,0 +1,41 @@ +#ifndef _ASM_CRIS_ARCH_USER_H +#define _ASM_CRIS_ARCH_USER_H + +/* User-mode register used for core dumps. */ + +struct user_regs_struct { + unsigned long r0; /* General registers. */ + unsigned long r1; + unsigned long r2; + unsigned long r3; + unsigned long r4; + unsigned long r5; + unsigned long r6; + unsigned long r7; + unsigned long r8; + unsigned long r9; + unsigned long r10; + unsigned long r11; + unsigned long r12; + unsigned long r13; + unsigned long sp; /* R14, Stack pointer. */ + unsigned long acr; /* R15, Address calculation register. */ + unsigned long bz; /* P0, Constant zero (8-bits). */ + unsigned long vr; /* P1, Version register (8-bits). */ + unsigned long pid; /* P2, Process ID (8-bits). */ + unsigned long srs; /* P3, Support register select (8-bits). */ + unsigned long wz; /* P4, Constant zero (16-bits). */ + unsigned long exs; /* P5, Exception status. */ + unsigned long eda; /* P6, Exception data address. */ + unsigned long mof; /* P7, Multiply overflow regiter. */ + unsigned long dz; /* P8, Constant zero (32-bits). */ + unsigned long ebp; /* P9, Exception base pointer. */ + unsigned long erp; /* P10, Exception return pointer. */ + unsigned long srp; /* P11, Subroutine return pointer. */ + unsigned long nrp; /* P12, NMI return pointer. */ + unsigned long ccs; /* P13, Condition code stack. */ + unsigned long usp; /* P14, User mode stack pointer. */ + unsigned long spc; /* P15, Single step PC. */ +}; + +#endif /* _ASM_CRIS_ARCH_USER_H */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/arbiter.h b/arch/cris/include/arch-v32/mach-a3/mach/arbiter.h new file mode 100644 index 000000000000..65e9d6ff0520 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/arbiter.h @@ -0,0 +1,34 @@ +#ifndef _ASM_CRIS_ARCH_ARBITER_H +#define _ASM_CRIS_ARCH_ARBITER_H + +#define EXT_REGION 0 +#define INT_REGION 1 + +typedef void (watch_callback)(void); + +enum { + arbiter_all_dmas = 0x7fe, + arbiter_cpu = 0x1800, + arbiter_all_clients = 0x7fff +}; + +enum { + arbiter_bar_all_clients = 0x1ff +}; + +enum { + arbiter_all_read = 0x55, + arbiter_all_write = 0xaa, + arbiter_all_accesses = 0xff +}; + +#define MARB_CLIENTS(foo_cli, bar_cli) (((bar_cli) << 16) | (foo_cli)) + +int crisv32_arbiter_allocate_bandwidth(int client, int region, + unsigned long bandwidth); +int crisv32_arbiter_watch(unsigned long start, unsigned long size, + unsigned long clients, unsigned long accesses, + watch_callback * cb); +int crisv32_arbiter_unwatch(int id); + +#endif diff --git a/arch/cris/include/arch-v32/mach-a3/mach/dma.h b/arch/cris/include/arch-v32/mach-a3/mach/dma.h new file mode 100644 index 000000000000..9e8eb13b601d --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/dma.h @@ -0,0 +1,31 @@ +#ifndef _ASM_ARCH_CRIS_DMA_H +#define _ASM_ARCH_CRIS_DMA_H + +/* Defines for using and allocating dma channels. */ + +#define MAX_DMA_CHANNELS 12 /* 8 and 10 not used. */ + +enum dma_owner { + dma_eth, + dma_ser0, + dma_ser1, + dma_ser2, + dma_ser3, + dma_ser4, + dma_iop, + dma_sser, + dma_strp, + dma_h264, + dma_jpeg +}; + +int crisv32_request_dma(unsigned int dmanr, const char *device_id, + unsigned options, unsigned bandwidth, enum dma_owner owner); +void crisv32_free_dma(unsigned int dmanr); + +/* Masks used by crisv32_request_dma options: */ +#define DMA_VERBOSE_ON_ERROR 1 +#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR) +#define DMA_INT_MEM 4 + +#endif /* _ASM_ARCH_CRIS_DMA_H */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/clkgen_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/clkgen_defs_asm.h new file mode 100644 index 000000000000..02855adf63e8 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/clkgen_defs_asm.h @@ -0,0 +1,164 @@ +#ifndef __clkgen_defs_asm_h +#define __clkgen_defs_asm_h + +/* + * This file is autogenerated from + * file: clkgen.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile clkgen_defs_asm.h clkgen.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_bootsel, scope clkgen, type r */ +#define reg_clkgen_r_bootsel___boot_mode___lsb 0 +#define reg_clkgen_r_bootsel___boot_mode___width 5 +#define reg_clkgen_r_bootsel___intern_main_clk___lsb 5 +#define reg_clkgen_r_bootsel___intern_main_clk___width 1 +#define reg_clkgen_r_bootsel___intern_main_clk___bit 5 +#define reg_clkgen_r_bootsel___extern_usb2_clk___lsb 6 +#define reg_clkgen_r_bootsel___extern_usb2_clk___width 1 +#define reg_clkgen_r_bootsel___extern_usb2_clk___bit 6 +#define reg_clkgen_r_bootsel_offset 0 + +/* Register rw_clk_ctrl, scope clkgen, type rw */ +#define reg_clkgen_rw_clk_ctrl___pll___lsb 0 +#define reg_clkgen_rw_clk_ctrl___pll___width 1 +#define reg_clkgen_rw_clk_ctrl___pll___bit 0 +#define reg_clkgen_rw_clk_ctrl___cpu___lsb 1 +#define reg_clkgen_rw_clk_ctrl___cpu___width 1 +#define reg_clkgen_rw_clk_ctrl___cpu___bit 1 +#define reg_clkgen_rw_clk_ctrl___iop_usb___lsb 2 +#define reg_clkgen_rw_clk_ctrl___iop_usb___width 1 +#define reg_clkgen_rw_clk_ctrl___iop_usb___bit 2 +#define reg_clkgen_rw_clk_ctrl___vin___lsb 3 +#define reg_clkgen_rw_clk_ctrl___vin___width 1 +#define reg_clkgen_rw_clk_ctrl___vin___bit 3 +#define reg_clkgen_rw_clk_ctrl___sclr___lsb 4 +#define reg_clkgen_rw_clk_ctrl___sclr___width 1 +#define reg_clkgen_rw_clk_ctrl___sclr___bit 4 +#define reg_clkgen_rw_clk_ctrl___h264___lsb 5 +#define reg_clkgen_rw_clk_ctrl___h264___width 1 +#define reg_clkgen_rw_clk_ctrl___h264___bit 5 +#define reg_clkgen_rw_clk_ctrl___ddr2___lsb 6 +#define reg_clkgen_rw_clk_ctrl___ddr2___width 1 +#define reg_clkgen_rw_clk_ctrl___ddr2___bit 6 +#define reg_clkgen_rw_clk_ctrl___vout_hist___lsb 7 +#define reg_clkgen_rw_clk_ctrl___vout_hist___width 1 +#define reg_clkgen_rw_clk_ctrl___vout_hist___bit 7 +#define reg_clkgen_rw_clk_ctrl___eth___lsb 8 +#define reg_clkgen_rw_clk_ctrl___eth___width 1 +#define reg_clkgen_rw_clk_ctrl___eth___bit 8 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_200___lsb 9 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_200___width 1 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_200___bit 9 +#define reg_clkgen_rw_clk_ctrl___dma0_1_eth___lsb 10 +#define reg_clkgen_rw_clk_ctrl___dma0_1_eth___width 1 +#define reg_clkgen_rw_clk_ctrl___dma0_1_eth___bit 10 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_100___lsb 11 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_100___width 1 +#define reg_clkgen_rw_clk_ctrl___ccd_tg_100___bit 11 +#define reg_clkgen_rw_clk_ctrl___jpeg___lsb 12 +#define reg_clkgen_rw_clk_ctrl___jpeg___width 1 +#define reg_clkgen_rw_clk_ctrl___jpeg___bit 12 +#define reg_clkgen_rw_clk_ctrl___sser_ser_dma6_7___lsb 13 +#define reg_clkgen_rw_clk_ctrl___sser_ser_dma6_7___width 1 +#define reg_clkgen_rw_clk_ctrl___sser_ser_dma6_7___bit 13 +#define reg_clkgen_rw_clk_ctrl___strdma0_2_video___lsb 14 +#define reg_clkgen_rw_clk_ctrl___strdma0_2_video___width 1 +#define reg_clkgen_rw_clk_ctrl___strdma0_2_video___bit 14 +#define reg_clkgen_rw_clk_ctrl___dma2_3_strcop___lsb 15 +#define reg_clkgen_rw_clk_ctrl___dma2_3_strcop___width 1 +#define reg_clkgen_rw_clk_ctrl___dma2_3_strcop___bit 15 +#define reg_clkgen_rw_clk_ctrl___dma4_5_iop___lsb 16 +#define reg_clkgen_rw_clk_ctrl___dma4_5_iop___width 1 +#define reg_clkgen_rw_clk_ctrl___dma4_5_iop___bit 16 +#define reg_clkgen_rw_clk_ctrl___dma9_11___lsb 17 +#define reg_clkgen_rw_clk_ctrl___dma9_11___width 1 +#define reg_clkgen_rw_clk_ctrl___dma9_11___bit 17 +#define reg_clkgen_rw_clk_ctrl___memarb_bar_ddr___lsb 18 +#define reg_clkgen_rw_clk_ctrl___memarb_bar_ddr___width 1 +#define reg_clkgen_rw_clk_ctrl___memarb_bar_ddr___bit 18 +#define reg_clkgen_rw_clk_ctrl___sclr_h264___lsb 19 +#define reg_clkgen_rw_clk_ctrl___sclr_h264___width 1 +#define reg_clkgen_rw_clk_ctrl___sclr_h264___bit 19 +#define reg_clkgen_rw_clk_ctrl_offset 4 + + +/* Constants */ +#define regk_clkgen_eth1000_rx 0x0000000c +#define regk_clkgen_eth1000_tx 0x0000000e +#define regk_clkgen_eth100_rx 0x0000001d +#define regk_clkgen_eth100_rx_half 0x0000001c +#define regk_clkgen_eth100_tx 0x0000001f +#define regk_clkgen_eth100_tx_half 0x0000001e +#define regk_clkgen_nand_3_2 0x00000000 +#define regk_clkgen_nand_3_2_0x30 0x00000002 +#define regk_clkgen_nand_3_2_0x30_pll 0x00000012 +#define regk_clkgen_nand_3_2_pll 0x00000010 +#define regk_clkgen_nand_3_3 0x00000001 +#define regk_clkgen_nand_3_3_0x30 0x00000003 +#define regk_clkgen_nand_3_3_0x30_pll 0x00000013 +#define regk_clkgen_nand_3_3_pll 0x00000011 +#define regk_clkgen_nand_4_2 0x00000004 +#define regk_clkgen_nand_4_2_0x30 0x00000006 +#define regk_clkgen_nand_4_2_0x30_pll 0x00000016 +#define regk_clkgen_nand_4_2_pll 0x00000014 +#define regk_clkgen_nand_4_3 0x00000005 +#define regk_clkgen_nand_4_3_0x30 0x00000007 +#define regk_clkgen_nand_4_3_0x30_pll 0x00000017 +#define regk_clkgen_nand_4_3_pll 0x00000015 +#define regk_clkgen_nand_5_2 0x00000008 +#define regk_clkgen_nand_5_2_0x30 0x0000000a +#define regk_clkgen_nand_5_2_0x30_pll 0x0000001a +#define regk_clkgen_nand_5_2_pll 0x00000018 +#define regk_clkgen_nand_5_3 0x00000009 +#define regk_clkgen_nand_5_3_0x30 0x0000000b +#define regk_clkgen_nand_5_3_0x30_pll 0x0000001b +#define regk_clkgen_nand_5_3_pll 0x00000019 +#define regk_clkgen_no 0x00000000 +#define regk_clkgen_rw_clk_ctrl_default 0x00000002 +#define regk_clkgen_ser 0x0000000d +#define regk_clkgen_ser_pll 0x0000000f +#define regk_clkgen_yes 0x00000001 +#endif /* __clkgen_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/ddr2_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/ddr2_defs_asm.h new file mode 100644 index 000000000000..b12be03edacb --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/ddr2_defs_asm.h @@ -0,0 +1,266 @@ +#ifndef __ddr2_defs_asm_h +#define __ddr2_defs_asm_h + +/* + * This file is autogenerated from + * file: ddr2.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile ddr2_defs_asm.h ddr2.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_cfg, scope ddr2, type rw */ +#define reg_ddr2_rw_cfg___col_width___lsb 0 +#define reg_ddr2_rw_cfg___col_width___width 4 +#define reg_ddr2_rw_cfg___nr_banks___lsb 4 +#define reg_ddr2_rw_cfg___nr_banks___width 1 +#define reg_ddr2_rw_cfg___nr_banks___bit 4 +#define reg_ddr2_rw_cfg___bw___lsb 5 +#define reg_ddr2_rw_cfg___bw___width 1 +#define reg_ddr2_rw_cfg___bw___bit 5 +#define reg_ddr2_rw_cfg___nr_ref___lsb 6 +#define reg_ddr2_rw_cfg___nr_ref___width 4 +#define reg_ddr2_rw_cfg___ref_interval___lsb 10 +#define reg_ddr2_rw_cfg___ref_interval___width 11 +#define reg_ddr2_rw_cfg___odt_ctrl___lsb 21 +#define reg_ddr2_rw_cfg___odt_ctrl___width 2 +#define reg_ddr2_rw_cfg___odt_mem___lsb 23 +#define reg_ddr2_rw_cfg___odt_mem___width 1 +#define reg_ddr2_rw_cfg___odt_mem___bit 23 +#define reg_ddr2_rw_cfg___imp_strength___lsb 24 +#define reg_ddr2_rw_cfg___imp_strength___width 1 +#define reg_ddr2_rw_cfg___imp_strength___bit 24 +#define reg_ddr2_rw_cfg___auto_imp_cal___lsb 25 +#define reg_ddr2_rw_cfg___auto_imp_cal___width 1 +#define reg_ddr2_rw_cfg___auto_imp_cal___bit 25 +#define reg_ddr2_rw_cfg___imp_cal_override___lsb 26 +#define reg_ddr2_rw_cfg___imp_cal_override___width 1 +#define reg_ddr2_rw_cfg___imp_cal_override___bit 26 +#define reg_ddr2_rw_cfg___dll_override___lsb 27 +#define reg_ddr2_rw_cfg___dll_override___width 1 +#define reg_ddr2_rw_cfg___dll_override___bit 27 +#define reg_ddr2_rw_cfg_offset 0 + +/* Register rw_timing, scope ddr2, type rw */ +#define reg_ddr2_rw_timing___wr___lsb 0 +#define reg_ddr2_rw_timing___wr___width 3 +#define reg_ddr2_rw_timing___rcd___lsb 3 +#define reg_ddr2_rw_timing___rcd___width 3 +#define reg_ddr2_rw_timing___rp___lsb 6 +#define reg_ddr2_rw_timing___rp___width 3 +#define reg_ddr2_rw_timing___ras___lsb 9 +#define reg_ddr2_rw_timing___ras___width 4 +#define reg_ddr2_rw_timing___rfc___lsb 13 +#define reg_ddr2_rw_timing___rfc___width 7 +#define reg_ddr2_rw_timing___rc___lsb 20 +#define reg_ddr2_rw_timing___rc___width 5 +#define reg_ddr2_rw_timing___rtp___lsb 25 +#define reg_ddr2_rw_timing___rtp___width 2 +#define reg_ddr2_rw_timing___rtw___lsb 27 +#define reg_ddr2_rw_timing___rtw___width 3 +#define reg_ddr2_rw_timing___wtr___lsb 30 +#define reg_ddr2_rw_timing___wtr___width 2 +#define reg_ddr2_rw_timing_offset 4 + +/* Register rw_latency, scope ddr2, type rw */ +#define reg_ddr2_rw_latency___cas___lsb 0 +#define reg_ddr2_rw_latency___cas___width 3 +#define reg_ddr2_rw_latency___additive___lsb 3 +#define reg_ddr2_rw_latency___additive___width 3 +#define reg_ddr2_rw_latency_offset 8 + +/* Register rw_phy_cfg, scope ddr2, type rw */ +#define reg_ddr2_rw_phy_cfg___en___lsb 0 +#define reg_ddr2_rw_phy_cfg___en___width 1 +#define reg_ddr2_rw_phy_cfg___en___bit 0 +#define reg_ddr2_rw_phy_cfg_offset 12 + +/* Register rw_phy_ctrl, scope ddr2, type rw */ +#define reg_ddr2_rw_phy_ctrl___rst___lsb 0 +#define reg_ddr2_rw_phy_ctrl___rst___width 1 +#define reg_ddr2_rw_phy_ctrl___rst___bit 0 +#define reg_ddr2_rw_phy_ctrl___cal_rst___lsb 1 +#define reg_ddr2_rw_phy_ctrl___cal_rst___width 1 +#define reg_ddr2_rw_phy_ctrl___cal_rst___bit 1 +#define reg_ddr2_rw_phy_ctrl___cal_start___lsb 2 +#define reg_ddr2_rw_phy_ctrl___cal_start___width 1 +#define reg_ddr2_rw_phy_ctrl___cal_start___bit 2 +#define reg_ddr2_rw_phy_ctrl_offset 16 + +/* Register rw_ctrl, scope ddr2, type rw */ +#define reg_ddr2_rw_ctrl___mrs_data___lsb 0 +#define reg_ddr2_rw_ctrl___mrs_data___width 16 +#define reg_ddr2_rw_ctrl___cmd___lsb 16 +#define reg_ddr2_rw_ctrl___cmd___width 8 +#define reg_ddr2_rw_ctrl_offset 20 + +/* Register rw_pwr_down, scope ddr2, type rw */ +#define reg_ddr2_rw_pwr_down___self_ref___lsb 0 +#define reg_ddr2_rw_pwr_down___self_ref___width 2 +#define reg_ddr2_rw_pwr_down___phy_en___lsb 2 +#define reg_ddr2_rw_pwr_down___phy_en___width 1 +#define reg_ddr2_rw_pwr_down___phy_en___bit 2 +#define reg_ddr2_rw_pwr_down_offset 24 + +/* Register r_stat, scope ddr2, type r */ +#define reg_ddr2_r_stat___dll_lock___lsb 0 +#define reg_ddr2_r_stat___dll_lock___width 1 +#define reg_ddr2_r_stat___dll_lock___bit 0 +#define reg_ddr2_r_stat___dll_delay_code___lsb 1 +#define reg_ddr2_r_stat___dll_delay_code___width 7 +#define reg_ddr2_r_stat___imp_cal_done___lsb 8 +#define reg_ddr2_r_stat___imp_cal_done___width 1 +#define reg_ddr2_r_stat___imp_cal_done___bit 8 +#define reg_ddr2_r_stat___imp_cal_fault___lsb 9 +#define reg_ddr2_r_stat___imp_cal_fault___width 1 +#define reg_ddr2_r_stat___imp_cal_fault___bit 9 +#define reg_ddr2_r_stat___cal_imp_pu___lsb 10 +#define reg_ddr2_r_stat___cal_imp_pu___width 4 +#define reg_ddr2_r_stat___cal_imp_pd___lsb 14 +#define reg_ddr2_r_stat___cal_imp_pd___width 4 +#define reg_ddr2_r_stat_offset 28 + +/* Register rw_imp_ctrl, scope ddr2, type rw */ +#define reg_ddr2_rw_imp_ctrl___imp_pu___lsb 0 +#define reg_ddr2_rw_imp_ctrl___imp_pu___width 4 +#define reg_ddr2_rw_imp_ctrl___imp_pd___lsb 4 +#define reg_ddr2_rw_imp_ctrl___imp_pd___width 4 +#define reg_ddr2_rw_imp_ctrl_offset 32 + +#define STRIDE_ddr2_rw_dll_ctrl 4 +/* Register rw_dll_ctrl, scope ddr2, type rw */ +#define reg_ddr2_rw_dll_ctrl___mode___lsb 0 +#define reg_ddr2_rw_dll_ctrl___mode___width 1 +#define reg_ddr2_rw_dll_ctrl___mode___bit 0 +#define reg_ddr2_rw_dll_ctrl___clk_delay___lsb 1 +#define reg_ddr2_rw_dll_ctrl___clk_delay___width 7 +#define reg_ddr2_rw_dll_ctrl_offset 36 + +#define STRIDE_ddr2_rw_dqs_dll_ctrl 4 +/* Register rw_dqs_dll_ctrl, scope ddr2, type rw */ +#define reg_ddr2_rw_dqs_dll_ctrl___dqs90_delay___lsb 0 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs90_delay___width 7 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs180_delay___lsb 7 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs180_delay___width 7 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs270_delay___lsb 14 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs270_delay___width 7 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs360_delay___lsb 21 +#define reg_ddr2_rw_dqs_dll_ctrl___dqs360_delay___width 7 +#define reg_ddr2_rw_dqs_dll_ctrl_offset 52 + + +/* Constants */ +#define regk_ddr2_al0 0x00000000 +#define regk_ddr2_al1 0x00000008 +#define regk_ddr2_al2 0x00000010 +#define regk_ddr2_al3 0x00000018 +#define regk_ddr2_al4 0x00000020 +#define regk_ddr2_auto 0x00000003 +#define regk_ddr2_bank4 0x00000000 +#define regk_ddr2_bank8 0x00000001 +#define regk_ddr2_bl4 0x00000002 +#define regk_ddr2_bl8 0x00000003 +#define regk_ddr2_bt_il 0x00000008 +#define regk_ddr2_bt_seq 0x00000000 +#define regk_ddr2_bw16 0x00000001 +#define regk_ddr2_bw32 0x00000000 +#define regk_ddr2_cas2 0x00000020 +#define regk_ddr2_cas3 0x00000030 +#define regk_ddr2_cas4 0x00000040 +#define regk_ddr2_cas5 0x00000050 +#define regk_ddr2_deselect 0x000000c0 +#define regk_ddr2_dic_weak 0x00000002 +#define regk_ddr2_direct 0x00000001 +#define regk_ddr2_dis 0x00000000 +#define regk_ddr2_dll_dis 0x00000001 +#define regk_ddr2_dll_en 0x00000000 +#define regk_ddr2_dll_rst 0x00000100 +#define regk_ddr2_emrs 0x00000081 +#define regk_ddr2_emrs2 0x00000082 +#define regk_ddr2_emrs3 0x00000083 +#define regk_ddr2_full 0x00000001 +#define regk_ddr2_hi_ref_rate 0x00000080 +#define regk_ddr2_mrs 0x00000080 +#define regk_ddr2_no 0x00000000 +#define regk_ddr2_nop 0x000000b8 +#define regk_ddr2_ocd_adj 0x00000200 +#define regk_ddr2_ocd_default 0x00000380 +#define regk_ddr2_ocd_drive0 0x00000100 +#define regk_ddr2_ocd_drive1 0x00000080 +#define regk_ddr2_ocd_exit 0x00000000 +#define regk_ddr2_odt_dis 0x00000000 +#define regk_ddr2_offs 0x00000000 +#define regk_ddr2_pre 0x00000090 +#define regk_ddr2_pre_all 0x00000400 +#define regk_ddr2_pwr_down_fast 0x00000000 +#define regk_ddr2_pwr_down_slow 0x00001000 +#define regk_ddr2_ref 0x00000088 +#define regk_ddr2_rtt150 0x00000040 +#define regk_ddr2_rtt50 0x00000044 +#define regk_ddr2_rtt75 0x00000004 +#define regk_ddr2_rw_cfg_default 0x00186000 +#define regk_ddr2_rw_dll_ctrl_default 0x00000000 +#define regk_ddr2_rw_dll_ctrl_size 0x00000004 +#define regk_ddr2_rw_dqs_dll_ctrl_default 0x00000000 +#define regk_ddr2_rw_dqs_dll_ctrl_size 0x00000004 +#define regk_ddr2_rw_latency_default 0x00000000 +#define regk_ddr2_rw_phy_cfg_default 0x00000000 +#define regk_ddr2_rw_pwr_down_default 0x00000000 +#define regk_ddr2_rw_timing_default 0x00000000 +#define regk_ddr2_s1Gb 0x0000001a +#define regk_ddr2_s256Mb 0x0000000f +#define regk_ddr2_s2Gb 0x00000027 +#define regk_ddr2_s4Gb 0x00000042 +#define regk_ddr2_s512Mb 0x00000015 +#define regk_ddr2_temp0_85 0x00000618 +#define regk_ddr2_temp85_95 0x0000030c +#define regk_ddr2_term150 0x00000002 +#define regk_ddr2_term50 0x00000003 +#define regk_ddr2_term75 0x00000001 +#define regk_ddr2_test 0x00000080 +#define regk_ddr2_weak 0x00000000 +#define regk_ddr2_wr2 0x00000200 +#define regk_ddr2_wr3 0x00000400 +#define regk_ddr2_yes 0x00000001 +#endif /* __ddr2_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/gio_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/gio_defs_asm.h new file mode 100644 index 000000000000..df6714fda179 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/gio_defs_asm.h @@ -0,0 +1,849 @@ +#ifndef __gio_defs_asm_h +#define __gio_defs_asm_h + +/* + * This file is autogenerated from + * file: gio.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile gio_defs_asm.h gio.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_pa_din, scope gio, type r */ +#define reg_gio_r_pa_din___data___lsb 0 +#define reg_gio_r_pa_din___data___width 32 +#define reg_gio_r_pa_din_offset 0 + +/* Register rw_pa_dout, scope gio, type rw */ +#define reg_gio_rw_pa_dout___data___lsb 0 +#define reg_gio_rw_pa_dout___data___width 32 +#define reg_gio_rw_pa_dout_offset 4 + +/* Register rw_pa_oe, scope gio, type rw */ +#define reg_gio_rw_pa_oe___oe___lsb 0 +#define reg_gio_rw_pa_oe___oe___width 32 +#define reg_gio_rw_pa_oe_offset 8 + +/* Register rw_pa_byte0_dout, scope gio, type rw */ +#define reg_gio_rw_pa_byte0_dout___data___lsb 0 +#define reg_gio_rw_pa_byte0_dout___data___width 8 +#define reg_gio_rw_pa_byte0_dout_offset 12 + +/* Register rw_pa_byte0_oe, scope gio, type rw */ +#define reg_gio_rw_pa_byte0_oe___oe___lsb 0 +#define reg_gio_rw_pa_byte0_oe___oe___width 8 +#define reg_gio_rw_pa_byte0_oe_offset 16 + +/* Register rw_pa_byte1_dout, scope gio, type rw */ +#define reg_gio_rw_pa_byte1_dout___data___lsb 0 +#define reg_gio_rw_pa_byte1_dout___data___width 8 +#define reg_gio_rw_pa_byte1_dout_offset 20 + +/* Register rw_pa_byte1_oe, scope gio, type rw */ +#define reg_gio_rw_pa_byte1_oe___oe___lsb 0 +#define reg_gio_rw_pa_byte1_oe___oe___width 8 +#define reg_gio_rw_pa_byte1_oe_offset 24 + +/* Register rw_pa_byte2_dout, scope gio, type rw */ +#define reg_gio_rw_pa_byte2_dout___data___lsb 0 +#define reg_gio_rw_pa_byte2_dout___data___width 8 +#define reg_gio_rw_pa_byte2_dout_offset 28 + +/* Register rw_pa_byte2_oe, scope gio, type rw */ +#define reg_gio_rw_pa_byte2_oe___oe___lsb 0 +#define reg_gio_rw_pa_byte2_oe___oe___width 8 +#define reg_gio_rw_pa_byte2_oe_offset 32 + +/* Register rw_pa_byte3_dout, scope gio, type rw */ +#define reg_gio_rw_pa_byte3_dout___data___lsb 0 +#define reg_gio_rw_pa_byte3_dout___data___width 8 +#define reg_gio_rw_pa_byte3_dout_offset 36 + +/* Register rw_pa_byte3_oe, scope gio, type rw */ +#define reg_gio_rw_pa_byte3_oe___oe___lsb 0 +#define reg_gio_rw_pa_byte3_oe___oe___width 8 +#define reg_gio_rw_pa_byte3_oe_offset 40 + +/* Register r_pb_din, scope gio, type r */ +#define reg_gio_r_pb_din___data___lsb 0 +#define reg_gio_r_pb_din___data___width 32 +#define reg_gio_r_pb_din_offset 44 + +/* Register rw_pb_dout, scope gio, type rw */ +#define reg_gio_rw_pb_dout___data___lsb 0 +#define reg_gio_rw_pb_dout___data___width 32 +#define reg_gio_rw_pb_dout_offset 48 + +/* Register rw_pb_oe, scope gio, type rw */ +#define reg_gio_rw_pb_oe___oe___lsb 0 +#define reg_gio_rw_pb_oe___oe___width 32 +#define reg_gio_rw_pb_oe_offset 52 + +/* Register rw_pb_byte0_dout, scope gio, type rw */ +#define reg_gio_rw_pb_byte0_dout___data___lsb 0 +#define reg_gio_rw_pb_byte0_dout___data___width 8 +#define reg_gio_rw_pb_byte0_dout_offset 56 + +/* Register rw_pb_byte0_oe, scope gio, type rw */ +#define reg_gio_rw_pb_byte0_oe___oe___lsb 0 +#define reg_gio_rw_pb_byte0_oe___oe___width 8 +#define reg_gio_rw_pb_byte0_oe_offset 60 + +/* Register rw_pb_byte1_dout, scope gio, type rw */ +#define reg_gio_rw_pb_byte1_dout___data___lsb 0 +#define reg_gio_rw_pb_byte1_dout___data___width 8 +#define reg_gio_rw_pb_byte1_dout_offset 64 + +/* Register rw_pb_byte1_oe, scope gio, type rw */ +#define reg_gio_rw_pb_byte1_oe___oe___lsb 0 +#define reg_gio_rw_pb_byte1_oe___oe___width 8 +#define reg_gio_rw_pb_byte1_oe_offset 68 + +/* Register rw_pb_byte2_dout, scope gio, type rw */ +#define reg_gio_rw_pb_byte2_dout___data___lsb 0 +#define reg_gio_rw_pb_byte2_dout___data___width 8 +#define reg_gio_rw_pb_byte2_dout_offset 72 + +/* Register rw_pb_byte2_oe, scope gio, type rw */ +#define reg_gio_rw_pb_byte2_oe___oe___lsb 0 +#define reg_gio_rw_pb_byte2_oe___oe___width 8 +#define reg_gio_rw_pb_byte2_oe_offset 76 + +/* Register rw_pb_byte3_dout, scope gio, type rw */ +#define reg_gio_rw_pb_byte3_dout___data___lsb 0 +#define reg_gio_rw_pb_byte3_dout___data___width 8 +#define reg_gio_rw_pb_byte3_dout_offset 80 + +/* Register rw_pb_byte3_oe, scope gio, type rw */ +#define reg_gio_rw_pb_byte3_oe___oe___lsb 0 +#define reg_gio_rw_pb_byte3_oe___oe___width 8 +#define reg_gio_rw_pb_byte3_oe_offset 84 + +/* Register r_pc_din, scope gio, type r */ +#define reg_gio_r_pc_din___data___lsb 0 +#define reg_gio_r_pc_din___data___width 16 +#define reg_gio_r_pc_din_offset 88 + +/* Register rw_pc_dout, scope gio, type rw */ +#define reg_gio_rw_pc_dout___data___lsb 0 +#define reg_gio_rw_pc_dout___data___width 16 +#define reg_gio_rw_pc_dout_offset 92 + +/* Register rw_pc_oe, scope gio, type rw */ +#define reg_gio_rw_pc_oe___oe___lsb 0 +#define reg_gio_rw_pc_oe___oe___width 16 +#define reg_gio_rw_pc_oe_offset 96 + +/* Register rw_pc_byte0_dout, scope gio, type rw */ +#define reg_gio_rw_pc_byte0_dout___data___lsb 0 +#define reg_gio_rw_pc_byte0_dout___data___width 8 +#define reg_gio_rw_pc_byte0_dout_offset 100 + +/* Register rw_pc_byte0_oe, scope gio, type rw */ +#define reg_gio_rw_pc_byte0_oe___oe___lsb 0 +#define reg_gio_rw_pc_byte0_oe___oe___width 8 +#define reg_gio_rw_pc_byte0_oe_offset 104 + +/* Register rw_pc_byte1_dout, scope gio, type rw */ +#define reg_gio_rw_pc_byte1_dout___data___lsb 0 +#define reg_gio_rw_pc_byte1_dout___data___width 8 +#define reg_gio_rw_pc_byte1_dout_offset 108 + +/* Register rw_pc_byte1_oe, scope gio, type rw */ +#define reg_gio_rw_pc_byte1_oe___oe___lsb 0 +#define reg_gio_rw_pc_byte1_oe___oe___width 8 +#define reg_gio_rw_pc_byte1_oe_offset 112 + +/* Register r_pd_din, scope gio, type r */ +#define reg_gio_r_pd_din___data___lsb 0 +#define reg_gio_r_pd_din___data___width 32 +#define reg_gio_r_pd_din_offset 116 + +/* Register rw_intr_cfg, scope gio, type rw */ +#define reg_gio_rw_intr_cfg___intr0___lsb 0 +#define reg_gio_rw_intr_cfg___intr0___width 3 +#define reg_gio_rw_intr_cfg___intr1___lsb 3 +#define reg_gio_rw_intr_cfg___intr1___width 3 +#define reg_gio_rw_intr_cfg___intr2___lsb 6 +#define reg_gio_rw_intr_cfg___intr2___width 3 +#define reg_gio_rw_intr_cfg___intr3___lsb 9 +#define reg_gio_rw_intr_cfg___intr3___width 3 +#define reg_gio_rw_intr_cfg___intr4___lsb 12 +#define reg_gio_rw_intr_cfg___intr4___width 3 +#define reg_gio_rw_intr_cfg___intr5___lsb 15 +#define reg_gio_rw_intr_cfg___intr5___width 3 +#define reg_gio_rw_intr_cfg___intr6___lsb 18 +#define reg_gio_rw_intr_cfg___intr6___width 3 +#define reg_gio_rw_intr_cfg___intr7___lsb 21 +#define reg_gio_rw_intr_cfg___intr7___width 3 +#define reg_gio_rw_intr_cfg_offset 120 + +/* Register rw_intr_pins, scope gio, type rw */ +#define reg_gio_rw_intr_pins___intr0___lsb 0 +#define reg_gio_rw_intr_pins___intr0___width 4 +#define reg_gio_rw_intr_pins___intr1___lsb 4 +#define reg_gio_rw_intr_pins___intr1___width 4 +#define reg_gio_rw_intr_pins___intr2___lsb 8 +#define reg_gio_rw_intr_pins___intr2___width 4 +#define reg_gio_rw_intr_pins___intr3___lsb 12 +#define reg_gio_rw_intr_pins___intr3___width 4 +#define reg_gio_rw_intr_pins___intr4___lsb 16 +#define reg_gio_rw_intr_pins___intr4___width 4 +#define reg_gio_rw_intr_pins___intr5___lsb 20 +#define reg_gio_rw_intr_pins___intr5___width 4 +#define reg_gio_rw_intr_pins___intr6___lsb 24 +#define reg_gio_rw_intr_pins___intr6___width 4 +#define reg_gio_rw_intr_pins___intr7___lsb 28 +#define reg_gio_rw_intr_pins___intr7___width 4 +#define reg_gio_rw_intr_pins_offset 124 + +/* Register rw_intr_mask, scope gio, type rw */ +#define reg_gio_rw_intr_mask___intr0___lsb 0 +#define reg_gio_rw_intr_mask___intr0___width 1 +#define reg_gio_rw_intr_mask___intr0___bit 0 +#define reg_gio_rw_intr_mask___intr1___lsb 1 +#define reg_gio_rw_intr_mask___intr1___width 1 +#define reg_gio_rw_intr_mask___intr1___bit 1 +#define reg_gio_rw_intr_mask___intr2___lsb 2 +#define reg_gio_rw_intr_mask___intr2___width 1 +#define reg_gio_rw_intr_mask___intr2___bit 2 +#define reg_gio_rw_intr_mask___intr3___lsb 3 +#define reg_gio_rw_intr_mask___intr3___width 1 +#define reg_gio_rw_intr_mask___intr3___bit 3 +#define reg_gio_rw_intr_mask___intr4___lsb 4 +#define reg_gio_rw_intr_mask___intr4___width 1 +#define reg_gio_rw_intr_mask___intr4___bit 4 +#define reg_gio_rw_intr_mask___intr5___lsb 5 +#define reg_gio_rw_intr_mask___intr5___width 1 +#define reg_gio_rw_intr_mask___intr5___bit 5 +#define reg_gio_rw_intr_mask___intr6___lsb 6 +#define reg_gio_rw_intr_mask___intr6___width 1 +#define reg_gio_rw_intr_mask___intr6___bit 6 +#define reg_gio_rw_intr_mask___intr7___lsb 7 +#define reg_gio_rw_intr_mask___intr7___width 1 +#define reg_gio_rw_intr_mask___intr7___bit 7 +#define reg_gio_rw_intr_mask___i2c0_done___lsb 8 +#define reg_gio_rw_intr_mask___i2c0_done___width 1 +#define reg_gio_rw_intr_mask___i2c0_done___bit 8 +#define reg_gio_rw_intr_mask___i2c1_done___lsb 9 +#define reg_gio_rw_intr_mask___i2c1_done___width 1 +#define reg_gio_rw_intr_mask___i2c1_done___bit 9 +#define reg_gio_rw_intr_mask_offset 128 + +/* Register rw_ack_intr, scope gio, type rw */ +#define reg_gio_rw_ack_intr___intr0___lsb 0 +#define reg_gio_rw_ack_intr___intr0___width 1 +#define reg_gio_rw_ack_intr___intr0___bit 0 +#define reg_gio_rw_ack_intr___intr1___lsb 1 +#define reg_gio_rw_ack_intr___intr1___width 1 +#define reg_gio_rw_ack_intr___intr1___bit 1 +#define reg_gio_rw_ack_intr___intr2___lsb 2 +#define reg_gio_rw_ack_intr___intr2___width 1 +#define reg_gio_rw_ack_intr___intr2___bit 2 +#define reg_gio_rw_ack_intr___intr3___lsb 3 +#define reg_gio_rw_ack_intr___intr3___width 1 +#define reg_gio_rw_ack_intr___intr3___bit 3 +#define reg_gio_rw_ack_intr___intr4___lsb 4 +#define reg_gio_rw_ack_intr___intr4___width 1 +#define reg_gio_rw_ack_intr___intr4___bit 4 +#define reg_gio_rw_ack_intr___intr5___lsb 5 +#define reg_gio_rw_ack_intr___intr5___width 1 +#define reg_gio_rw_ack_intr___intr5___bit 5 +#define reg_gio_rw_ack_intr___intr6___lsb 6 +#define reg_gio_rw_ack_intr___intr6___width 1 +#define reg_gio_rw_ack_intr___intr6___bit 6 +#define reg_gio_rw_ack_intr___intr7___lsb 7 +#define reg_gio_rw_ack_intr___intr7___width 1 +#define reg_gio_rw_ack_intr___intr7___bit 7 +#define reg_gio_rw_ack_intr___i2c0_done___lsb 8 +#define reg_gio_rw_ack_intr___i2c0_done___width 1 +#define reg_gio_rw_ack_intr___i2c0_done___bit 8 +#define reg_gio_rw_ack_intr___i2c1_done___lsb 9 +#define reg_gio_rw_ack_intr___i2c1_done___width 1 +#define reg_gio_rw_ack_intr___i2c1_done___bit 9 +#define reg_gio_rw_ack_intr_offset 132 + +/* Register r_intr, scope gio, type r */ +#define reg_gio_r_intr___intr0___lsb 0 +#define reg_gio_r_intr___intr0___width 1 +#define reg_gio_r_intr___intr0___bit 0 +#define reg_gio_r_intr___intr1___lsb 1 +#define reg_gio_r_intr___intr1___width 1 +#define reg_gio_r_intr___intr1___bit 1 +#define reg_gio_r_intr___intr2___lsb 2 +#define reg_gio_r_intr___intr2___width 1 +#define reg_gio_r_intr___intr2___bit 2 +#define reg_gio_r_intr___intr3___lsb 3 +#define reg_gio_r_intr___intr3___width 1 +#define reg_gio_r_intr___intr3___bit 3 +#define reg_gio_r_intr___intr4___lsb 4 +#define reg_gio_r_intr___intr4___width 1 +#define reg_gio_r_intr___intr4___bit 4 +#define reg_gio_r_intr___intr5___lsb 5 +#define reg_gio_r_intr___intr5___width 1 +#define reg_gio_r_intr___intr5___bit 5 +#define reg_gio_r_intr___intr6___lsb 6 +#define reg_gio_r_intr___intr6___width 1 +#define reg_gio_r_intr___intr6___bit 6 +#define reg_gio_r_intr___intr7___lsb 7 +#define reg_gio_r_intr___intr7___width 1 +#define reg_gio_r_intr___intr7___bit 7 +#define reg_gio_r_intr___i2c0_done___lsb 8 +#define reg_gio_r_intr___i2c0_done___width 1 +#define reg_gio_r_intr___i2c0_done___bit 8 +#define reg_gio_r_intr___i2c1_done___lsb 9 +#define reg_gio_r_intr___i2c1_done___width 1 +#define reg_gio_r_intr___i2c1_done___bit 9 +#define reg_gio_r_intr_offset 136 + +/* Register r_masked_intr, scope gio, type r */ +#define reg_gio_r_masked_intr___intr0___lsb 0 +#define reg_gio_r_masked_intr___intr0___width 1 +#define reg_gio_r_masked_intr___intr0___bit 0 +#define reg_gio_r_masked_intr___intr1___lsb 1 +#define reg_gio_r_masked_intr___intr1___width 1 +#define reg_gio_r_masked_intr___intr1___bit 1 +#define reg_gio_r_masked_intr___intr2___lsb 2 +#define reg_gio_r_masked_intr___intr2___width 1 +#define reg_gio_r_masked_intr___intr2___bit 2 +#define reg_gio_r_masked_intr___intr3___lsb 3 +#define reg_gio_r_masked_intr___intr3___width 1 +#define reg_gio_r_masked_intr___intr3___bit 3 +#define reg_gio_r_masked_intr___intr4___lsb 4 +#define reg_gio_r_masked_intr___intr4___width 1 +#define reg_gio_r_masked_intr___intr4___bit 4 +#define reg_gio_r_masked_intr___intr5___lsb 5 +#define reg_gio_r_masked_intr___intr5___width 1 +#define reg_gio_r_masked_intr___intr5___bit 5 +#define reg_gio_r_masked_intr___intr6___lsb 6 +#define reg_gio_r_masked_intr___intr6___width 1 +#define reg_gio_r_masked_intr___intr6___bit 6 +#define reg_gio_r_masked_intr___intr7___lsb 7 +#define reg_gio_r_masked_intr___intr7___width 1 +#define reg_gio_r_masked_intr___intr7___bit 7 +#define reg_gio_r_masked_intr___i2c0_done___lsb 8 +#define reg_gio_r_masked_intr___i2c0_done___width 1 +#define reg_gio_r_masked_intr___i2c0_done___bit 8 +#define reg_gio_r_masked_intr___i2c1_done___lsb 9 +#define reg_gio_r_masked_intr___i2c1_done___width 1 +#define reg_gio_r_masked_intr___i2c1_done___bit 9 +#define reg_gio_r_masked_intr_offset 140 + +/* Register rw_i2c0_start, scope gio, type rw */ +#define reg_gio_rw_i2c0_start___run___lsb 0 +#define reg_gio_rw_i2c0_start___run___width 1 +#define reg_gio_rw_i2c0_start___run___bit 0 +#define reg_gio_rw_i2c0_start_offset 144 + +/* Register rw_i2c0_cfg, scope gio, type rw */ +#define reg_gio_rw_i2c0_cfg___en___lsb 0 +#define reg_gio_rw_i2c0_cfg___en___width 1 +#define reg_gio_rw_i2c0_cfg___en___bit 0 +#define reg_gio_rw_i2c0_cfg___bit_order___lsb 1 +#define reg_gio_rw_i2c0_cfg___bit_order___width 1 +#define reg_gio_rw_i2c0_cfg___bit_order___bit 1 +#define reg_gio_rw_i2c0_cfg___scl_io___lsb 2 +#define reg_gio_rw_i2c0_cfg___scl_io___width 1 +#define reg_gio_rw_i2c0_cfg___scl_io___bit 2 +#define reg_gio_rw_i2c0_cfg___scl_inv___lsb 3 +#define reg_gio_rw_i2c0_cfg___scl_inv___width 1 +#define reg_gio_rw_i2c0_cfg___scl_inv___bit 3 +#define reg_gio_rw_i2c0_cfg___sda_io___lsb 4 +#define reg_gio_rw_i2c0_cfg___sda_io___width 1 +#define reg_gio_rw_i2c0_cfg___sda_io___bit 4 +#define reg_gio_rw_i2c0_cfg___sda_idle___lsb 5 +#define reg_gio_rw_i2c0_cfg___sda_idle___width 1 +#define reg_gio_rw_i2c0_cfg___sda_idle___bit 5 +#define reg_gio_rw_i2c0_cfg_offset 148 + +/* Register rw_i2c0_ctrl, scope gio, type rw */ +#define reg_gio_rw_i2c0_ctrl___trf_bits___lsb 0 +#define reg_gio_rw_i2c0_ctrl___trf_bits___width 6 +#define reg_gio_rw_i2c0_ctrl___switch_dir___lsb 6 +#define reg_gio_rw_i2c0_ctrl___switch_dir___width 6 +#define reg_gio_rw_i2c0_ctrl___extra_start___lsb 12 +#define reg_gio_rw_i2c0_ctrl___extra_start___width 3 +#define reg_gio_rw_i2c0_ctrl___early_end___lsb 15 +#define reg_gio_rw_i2c0_ctrl___early_end___width 1 +#define reg_gio_rw_i2c0_ctrl___early_end___bit 15 +#define reg_gio_rw_i2c0_ctrl___start_stop___lsb 16 +#define reg_gio_rw_i2c0_ctrl___start_stop___width 1 +#define reg_gio_rw_i2c0_ctrl___start_stop___bit 16 +#define reg_gio_rw_i2c0_ctrl___ack_dir0___lsb 17 +#define reg_gio_rw_i2c0_ctrl___ack_dir0___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir0___bit 17 +#define reg_gio_rw_i2c0_ctrl___ack_dir1___lsb 18 +#define reg_gio_rw_i2c0_ctrl___ack_dir1___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir1___bit 18 +#define reg_gio_rw_i2c0_ctrl___ack_dir2___lsb 19 +#define reg_gio_rw_i2c0_ctrl___ack_dir2___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir2___bit 19 +#define reg_gio_rw_i2c0_ctrl___ack_dir3___lsb 20 +#define reg_gio_rw_i2c0_ctrl___ack_dir3___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir3___bit 20 +#define reg_gio_rw_i2c0_ctrl___ack_dir4___lsb 21 +#define reg_gio_rw_i2c0_ctrl___ack_dir4___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir4___bit 21 +#define reg_gio_rw_i2c0_ctrl___ack_dir5___lsb 22 +#define reg_gio_rw_i2c0_ctrl___ack_dir5___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_dir5___bit 22 +#define reg_gio_rw_i2c0_ctrl___ack_bit___lsb 23 +#define reg_gio_rw_i2c0_ctrl___ack_bit___width 1 +#define reg_gio_rw_i2c0_ctrl___ack_bit___bit 23 +#define reg_gio_rw_i2c0_ctrl___start_bit___lsb 24 +#define reg_gio_rw_i2c0_ctrl___start_bit___width 1 +#define reg_gio_rw_i2c0_ctrl___start_bit___bit 24 +#define reg_gio_rw_i2c0_ctrl___freq___lsb 25 +#define reg_gio_rw_i2c0_ctrl___freq___width 2 +#define reg_gio_rw_i2c0_ctrl_offset 152 + +/* Register rw_i2c0_data, scope gio, type rw */ +#define reg_gio_rw_i2c0_data___data0___lsb 0 +#define reg_gio_rw_i2c0_data___data0___width 8 +#define reg_gio_rw_i2c0_data___data1___lsb 8 +#define reg_gio_rw_i2c0_data___data1___width 8 +#define reg_gio_rw_i2c0_data___data2___lsb 16 +#define reg_gio_rw_i2c0_data___data2___width 8 +#define reg_gio_rw_i2c0_data___data3___lsb 24 +#define reg_gio_rw_i2c0_data___data3___width 8 +#define reg_gio_rw_i2c0_data_offset 156 + +/* Register rw_i2c0_data2, scope gio, type rw */ +#define reg_gio_rw_i2c0_data2___data4___lsb 0 +#define reg_gio_rw_i2c0_data2___data4___width 8 +#define reg_gio_rw_i2c0_data2___data5___lsb 8 +#define reg_gio_rw_i2c0_data2___data5___width 8 +#define reg_gio_rw_i2c0_data2___start_val___lsb 16 +#define reg_gio_rw_i2c0_data2___start_val___width 6 +#define reg_gio_rw_i2c0_data2___ack_val___lsb 22 +#define reg_gio_rw_i2c0_data2___ack_val___width 6 +#define reg_gio_rw_i2c0_data2_offset 160 + +/* Register rw_i2c1_start, scope gio, type rw */ +#define reg_gio_rw_i2c1_start___run___lsb 0 +#define reg_gio_rw_i2c1_start___run___width 1 +#define reg_gio_rw_i2c1_start___run___bit 0 +#define reg_gio_rw_i2c1_start_offset 164 + +/* Register rw_i2c1_cfg, scope gio, type rw */ +#define reg_gio_rw_i2c1_cfg___en___lsb 0 +#define reg_gio_rw_i2c1_cfg___en___width 1 +#define reg_gio_rw_i2c1_cfg___en___bit 0 +#define reg_gio_rw_i2c1_cfg___bit_order___lsb 1 +#define reg_gio_rw_i2c1_cfg___bit_order___width 1 +#define reg_gio_rw_i2c1_cfg___bit_order___bit 1 +#define reg_gio_rw_i2c1_cfg___scl_io___lsb 2 +#define reg_gio_rw_i2c1_cfg___scl_io___width 1 +#define reg_gio_rw_i2c1_cfg___scl_io___bit 2 +#define reg_gio_rw_i2c1_cfg___scl_inv___lsb 3 +#define reg_gio_rw_i2c1_cfg___scl_inv___width 1 +#define reg_gio_rw_i2c1_cfg___scl_inv___bit 3 +#define reg_gio_rw_i2c1_cfg___sda0_io___lsb 4 +#define reg_gio_rw_i2c1_cfg___sda0_io___width 1 +#define reg_gio_rw_i2c1_cfg___sda0_io___bit 4 +#define reg_gio_rw_i2c1_cfg___sda0_idle___lsb 5 +#define reg_gio_rw_i2c1_cfg___sda0_idle___width 1 +#define reg_gio_rw_i2c1_cfg___sda0_idle___bit 5 +#define reg_gio_rw_i2c1_cfg___sda1_io___lsb 6 +#define reg_gio_rw_i2c1_cfg___sda1_io___width 1 +#define reg_gio_rw_i2c1_cfg___sda1_io___bit 6 +#define reg_gio_rw_i2c1_cfg___sda1_idle___lsb 7 +#define reg_gio_rw_i2c1_cfg___sda1_idle___width 1 +#define reg_gio_rw_i2c1_cfg___sda1_idle___bit 7 +#define reg_gio_rw_i2c1_cfg___sda2_io___lsb 8 +#define reg_gio_rw_i2c1_cfg___sda2_io___width 1 +#define reg_gio_rw_i2c1_cfg___sda2_io___bit 8 +#define reg_gio_rw_i2c1_cfg___sda2_idle___lsb 9 +#define reg_gio_rw_i2c1_cfg___sda2_idle___width 1 +#define reg_gio_rw_i2c1_cfg___sda2_idle___bit 9 +#define reg_gio_rw_i2c1_cfg___sda3_io___lsb 10 +#define reg_gio_rw_i2c1_cfg___sda3_io___width 1 +#define reg_gio_rw_i2c1_cfg___sda3_io___bit 10 +#define reg_gio_rw_i2c1_cfg___sda3_idle___lsb 11 +#define reg_gio_rw_i2c1_cfg___sda3_idle___width 1 +#define reg_gio_rw_i2c1_cfg___sda3_idle___bit 11 +#define reg_gio_rw_i2c1_cfg___sda_sel___lsb 12 +#define reg_gio_rw_i2c1_cfg___sda_sel___width 2 +#define reg_gio_rw_i2c1_cfg___sen_idle___lsb 14 +#define reg_gio_rw_i2c1_cfg___sen_idle___width 1 +#define reg_gio_rw_i2c1_cfg___sen_idle___bit 14 +#define reg_gio_rw_i2c1_cfg___sen_inv___lsb 15 +#define reg_gio_rw_i2c1_cfg___sen_inv___width 1 +#define reg_gio_rw_i2c1_cfg___sen_inv___bit 15 +#define reg_gio_rw_i2c1_cfg___sen_sel___lsb 16 +#define reg_gio_rw_i2c1_cfg___sen_sel___width 2 +#define reg_gio_rw_i2c1_cfg_offset 168 + +/* Register rw_i2c1_ctrl, scope gio, type rw */ +#define reg_gio_rw_i2c1_ctrl___trf_bits___lsb 0 +#define reg_gio_rw_i2c1_ctrl___trf_bits___width 6 +#define reg_gio_rw_i2c1_ctrl___switch_dir___lsb 6 +#define reg_gio_rw_i2c1_ctrl___switch_dir___width 6 +#define reg_gio_rw_i2c1_ctrl___extra_start___lsb 12 +#define reg_gio_rw_i2c1_ctrl___extra_start___width 3 +#define reg_gio_rw_i2c1_ctrl___early_end___lsb 15 +#define reg_gio_rw_i2c1_ctrl___early_end___width 1 +#define reg_gio_rw_i2c1_ctrl___early_end___bit 15 +#define reg_gio_rw_i2c1_ctrl___start_stop___lsb 16 +#define reg_gio_rw_i2c1_ctrl___start_stop___width 1 +#define reg_gio_rw_i2c1_ctrl___start_stop___bit 16 +#define reg_gio_rw_i2c1_ctrl___ack_dir0___lsb 17 +#define reg_gio_rw_i2c1_ctrl___ack_dir0___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir0___bit 17 +#define reg_gio_rw_i2c1_ctrl___ack_dir1___lsb 18 +#define reg_gio_rw_i2c1_ctrl___ack_dir1___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir1___bit 18 +#define reg_gio_rw_i2c1_ctrl___ack_dir2___lsb 19 +#define reg_gio_rw_i2c1_ctrl___ack_dir2___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir2___bit 19 +#define reg_gio_rw_i2c1_ctrl___ack_dir3___lsb 20 +#define reg_gio_rw_i2c1_ctrl___ack_dir3___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir3___bit 20 +#define reg_gio_rw_i2c1_ctrl___ack_dir4___lsb 21 +#define reg_gio_rw_i2c1_ctrl___ack_dir4___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir4___bit 21 +#define reg_gio_rw_i2c1_ctrl___ack_dir5___lsb 22 +#define reg_gio_rw_i2c1_ctrl___ack_dir5___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_dir5___bit 22 +#define reg_gio_rw_i2c1_ctrl___ack_bit___lsb 23 +#define reg_gio_rw_i2c1_ctrl___ack_bit___width 1 +#define reg_gio_rw_i2c1_ctrl___ack_bit___bit 23 +#define reg_gio_rw_i2c1_ctrl___start_bit___lsb 24 +#define reg_gio_rw_i2c1_ctrl___start_bit___width 1 +#define reg_gio_rw_i2c1_ctrl___start_bit___bit 24 +#define reg_gio_rw_i2c1_ctrl___freq___lsb 25 +#define reg_gio_rw_i2c1_ctrl___freq___width 2 +#define reg_gio_rw_i2c1_ctrl_offset 172 + +/* Register rw_i2c1_data, scope gio, type rw */ +#define reg_gio_rw_i2c1_data___data0___lsb 0 +#define reg_gio_rw_i2c1_data___data0___width 8 +#define reg_gio_rw_i2c1_data___data1___lsb 8 +#define reg_gio_rw_i2c1_data___data1___width 8 +#define reg_gio_rw_i2c1_data___data2___lsb 16 +#define reg_gio_rw_i2c1_data___data2___width 8 +#define reg_gio_rw_i2c1_data___data3___lsb 24 +#define reg_gio_rw_i2c1_data___data3___width 8 +#define reg_gio_rw_i2c1_data_offset 176 + +/* Register rw_i2c1_data2, scope gio, type rw */ +#define reg_gio_rw_i2c1_data2___data4___lsb 0 +#define reg_gio_rw_i2c1_data2___data4___width 8 +#define reg_gio_rw_i2c1_data2___data5___lsb 8 +#define reg_gio_rw_i2c1_data2___data5___width 8 +#define reg_gio_rw_i2c1_data2___start_val___lsb 16 +#define reg_gio_rw_i2c1_data2___start_val___width 6 +#define reg_gio_rw_i2c1_data2___ack_val___lsb 22 +#define reg_gio_rw_i2c1_data2___ack_val___width 6 +#define reg_gio_rw_i2c1_data2_offset 180 + +/* Register r_ppwm_stat, scope gio, type r */ +#define reg_gio_r_ppwm_stat___freq___lsb 0 +#define reg_gio_r_ppwm_stat___freq___width 2 +#define reg_gio_r_ppwm_stat_offset 184 + +/* Register rw_ppwm_data, scope gio, type rw */ +#define reg_gio_rw_ppwm_data___data___lsb 0 +#define reg_gio_rw_ppwm_data___data___width 8 +#define reg_gio_rw_ppwm_data_offset 188 + +/* Register rw_pwm0_ctrl, scope gio, type rw */ +#define reg_gio_rw_pwm0_ctrl___mode___lsb 0 +#define reg_gio_rw_pwm0_ctrl___mode___width 2 +#define reg_gio_rw_pwm0_ctrl___ccd_override___lsb 2 +#define reg_gio_rw_pwm0_ctrl___ccd_override___width 1 +#define reg_gio_rw_pwm0_ctrl___ccd_override___bit 2 +#define reg_gio_rw_pwm0_ctrl___ccd_val___lsb 3 +#define reg_gio_rw_pwm0_ctrl___ccd_val___width 1 +#define reg_gio_rw_pwm0_ctrl___ccd_val___bit 3 +#define reg_gio_rw_pwm0_ctrl_offset 192 + +/* Register rw_pwm0_var, scope gio, type rw */ +#define reg_gio_rw_pwm0_var___lo___lsb 0 +#define reg_gio_rw_pwm0_var___lo___width 13 +#define reg_gio_rw_pwm0_var___hi___lsb 13 +#define reg_gio_rw_pwm0_var___hi___width 13 +#define reg_gio_rw_pwm0_var_offset 196 + +/* Register rw_pwm0_data, scope gio, type rw */ +#define reg_gio_rw_pwm0_data___data___lsb 0 +#define reg_gio_rw_pwm0_data___data___width 8 +#define reg_gio_rw_pwm0_data_offset 200 + +/* Register rw_pwm1_ctrl, scope gio, type rw */ +#define reg_gio_rw_pwm1_ctrl___mode___lsb 0 +#define reg_gio_rw_pwm1_ctrl___mode___width 2 +#define reg_gio_rw_pwm1_ctrl___ccd_override___lsb 2 +#define reg_gio_rw_pwm1_ctrl___ccd_override___width 1 +#define reg_gio_rw_pwm1_ctrl___ccd_override___bit 2 +#define reg_gio_rw_pwm1_ctrl___ccd_val___lsb 3 +#define reg_gio_rw_pwm1_ctrl___ccd_val___width 1 +#define reg_gio_rw_pwm1_ctrl___ccd_val___bit 3 +#define reg_gio_rw_pwm1_ctrl_offset 204 + +/* Register rw_pwm1_var, scope gio, type rw */ +#define reg_gio_rw_pwm1_var___lo___lsb 0 +#define reg_gio_rw_pwm1_var___lo___width 13 +#define reg_gio_rw_pwm1_var___hi___lsb 13 +#define reg_gio_rw_pwm1_var___hi___width 13 +#define reg_gio_rw_pwm1_var_offset 208 + +/* Register rw_pwm1_data, scope gio, type rw */ +#define reg_gio_rw_pwm1_data___data___lsb 0 +#define reg_gio_rw_pwm1_data___data___width 8 +#define reg_gio_rw_pwm1_data_offset 212 + +/* Register rw_pwm2_ctrl, scope gio, type rw */ +#define reg_gio_rw_pwm2_ctrl___mode___lsb 0 +#define reg_gio_rw_pwm2_ctrl___mode___width 2 +#define reg_gio_rw_pwm2_ctrl___ccd_override___lsb 2 +#define reg_gio_rw_pwm2_ctrl___ccd_override___width 1 +#define reg_gio_rw_pwm2_ctrl___ccd_override___bit 2 +#define reg_gio_rw_pwm2_ctrl___ccd_val___lsb 3 +#define reg_gio_rw_pwm2_ctrl___ccd_val___width 1 +#define reg_gio_rw_pwm2_ctrl___ccd_val___bit 3 +#define reg_gio_rw_pwm2_ctrl_offset 216 + +/* Register rw_pwm2_var, scope gio, type rw */ +#define reg_gio_rw_pwm2_var___lo___lsb 0 +#define reg_gio_rw_pwm2_var___lo___width 13 +#define reg_gio_rw_pwm2_var___hi___lsb 13 +#define reg_gio_rw_pwm2_var___hi___width 13 +#define reg_gio_rw_pwm2_var_offset 220 + +/* Register rw_pwm2_data, scope gio, type rw */ +#define reg_gio_rw_pwm2_data___data___lsb 0 +#define reg_gio_rw_pwm2_data___data___width 8 +#define reg_gio_rw_pwm2_data_offset 224 + +/* Register rw_pwm_in_cfg, scope gio, type rw */ +#define reg_gio_rw_pwm_in_cfg___pin___lsb 0 +#define reg_gio_rw_pwm_in_cfg___pin___width 3 +#define reg_gio_rw_pwm_in_cfg_offset 228 + +/* Register r_pwm_in_lo, scope gio, type r */ +#define reg_gio_r_pwm_in_lo___data___lsb 0 +#define reg_gio_r_pwm_in_lo___data___width 32 +#define reg_gio_r_pwm_in_lo_offset 232 + +/* Register r_pwm_in_hi, scope gio, type r */ +#define reg_gio_r_pwm_in_hi___data___lsb 0 +#define reg_gio_r_pwm_in_hi___data___width 32 +#define reg_gio_r_pwm_in_hi_offset 236 + +/* Register r_pwm_in_cnt, scope gio, type r */ +#define reg_gio_r_pwm_in_cnt___data___lsb 0 +#define reg_gio_r_pwm_in_cnt___data___width 32 +#define reg_gio_r_pwm_in_cnt_offset 240 + + +/* Constants */ +#define regk_gio_anyedge 0x00000007 +#define regk_gio_f100k 0x00000000 +#define regk_gio_f1562 0x00000000 +#define regk_gio_f195 0x00000003 +#define regk_gio_f1m 0x00000002 +#define regk_gio_f390 0x00000002 +#define regk_gio_f400k 0x00000001 +#define regk_gio_f5m 0x00000003 +#define regk_gio_f781 0x00000001 +#define regk_gio_hi 0x00000001 +#define regk_gio_in 0x00000000 +#define regk_gio_intr_pa0 0x00000000 +#define regk_gio_intr_pa1 0x00000000 +#define regk_gio_intr_pa10 0x00000001 +#define regk_gio_intr_pa11 0x00000001 +#define regk_gio_intr_pa12 0x00000001 +#define regk_gio_intr_pa13 0x00000001 +#define regk_gio_intr_pa14 0x00000001 +#define regk_gio_intr_pa15 0x00000001 +#define regk_gio_intr_pa16 0x00000002 +#define regk_gio_intr_pa17 0x00000002 +#define regk_gio_intr_pa18 0x00000002 +#define regk_gio_intr_pa19 0x00000002 +#define regk_gio_intr_pa2 0x00000000 +#define regk_gio_intr_pa20 0x00000002 +#define regk_gio_intr_pa21 0x00000002 +#define regk_gio_intr_pa22 0x00000002 +#define regk_gio_intr_pa23 0x00000002 +#define regk_gio_intr_pa24 0x00000003 +#define regk_gio_intr_pa25 0x00000003 +#define regk_gio_intr_pa26 0x00000003 +#define regk_gio_intr_pa27 0x00000003 +#define regk_gio_intr_pa28 0x00000003 +#define regk_gio_intr_pa29 0x00000003 +#define regk_gio_intr_pa3 0x00000000 +#define regk_gio_intr_pa30 0x00000003 +#define regk_gio_intr_pa31 0x00000003 +#define regk_gio_intr_pa4 0x00000000 +#define regk_gio_intr_pa5 0x00000000 +#define regk_gio_intr_pa6 0x00000000 +#define regk_gio_intr_pa7 0x00000000 +#define regk_gio_intr_pa8 0x00000001 +#define regk_gio_intr_pa9 0x00000001 +#define regk_gio_intr_pb0 0x00000004 +#define regk_gio_intr_pb1 0x00000004 +#define regk_gio_intr_pb10 0x00000005 +#define regk_gio_intr_pb11 0x00000005 +#define regk_gio_intr_pb12 0x00000005 +#define regk_gio_intr_pb13 0x00000005 +#define regk_gio_intr_pb14 0x00000005 +#define regk_gio_intr_pb15 0x00000005 +#define regk_gio_intr_pb16 0x00000006 +#define regk_gio_intr_pb17 0x00000006 +#define regk_gio_intr_pb18 0x00000006 +#define regk_gio_intr_pb19 0x00000006 +#define regk_gio_intr_pb2 0x00000004 +#define regk_gio_intr_pb20 0x00000006 +#define regk_gio_intr_pb21 0x00000006 +#define regk_gio_intr_pb22 0x00000006 +#define regk_gio_intr_pb23 0x00000006 +#define regk_gio_intr_pb24 0x00000007 +#define regk_gio_intr_pb25 0x00000007 +#define regk_gio_intr_pb26 0x00000007 +#define regk_gio_intr_pb27 0x00000007 +#define regk_gio_intr_pb28 0x00000007 +#define regk_gio_intr_pb29 0x00000007 +#define regk_gio_intr_pb3 0x00000004 +#define regk_gio_intr_pb30 0x00000007 +#define regk_gio_intr_pb31 0x00000007 +#define regk_gio_intr_pb4 0x00000004 +#define regk_gio_intr_pb5 0x00000004 +#define regk_gio_intr_pb6 0x00000004 +#define regk_gio_intr_pb7 0x00000004 +#define regk_gio_intr_pb8 0x00000005 +#define regk_gio_intr_pb9 0x00000005 +#define regk_gio_intr_pc0 0x00000008 +#define regk_gio_intr_pc1 0x00000008 +#define regk_gio_intr_pc10 0x00000009 +#define regk_gio_intr_pc11 0x00000009 +#define regk_gio_intr_pc12 0x00000009 +#define regk_gio_intr_pc13 0x00000009 +#define regk_gio_intr_pc14 0x00000009 +#define regk_gio_intr_pc15 0x00000009 +#define regk_gio_intr_pc2 0x00000008 +#define regk_gio_intr_pc3 0x00000008 +#define regk_gio_intr_pc4 0x00000008 +#define regk_gio_intr_pc5 0x00000008 +#define regk_gio_intr_pc6 0x00000008 +#define regk_gio_intr_pc7 0x00000008 +#define regk_gio_intr_pc8 0x00000009 +#define regk_gio_intr_pc9 0x00000009 +#define regk_gio_intr_pd0 0x0000000c +#define regk_gio_intr_pd1 0x0000000c +#define regk_gio_intr_pd10 0x0000000d +#define regk_gio_intr_pd11 0x0000000d +#define regk_gio_intr_pd12 0x0000000d +#define regk_gio_intr_pd13 0x0000000d +#define regk_gio_intr_pd14 0x0000000d +#define regk_gio_intr_pd15 0x0000000d +#define regk_gio_intr_pd16 0x0000000e +#define regk_gio_intr_pd17 0x0000000e +#define regk_gio_intr_pd18 0x0000000e +#define regk_gio_intr_pd19 0x0000000e +#define regk_gio_intr_pd2 0x0000000c +#define regk_gio_intr_pd20 0x0000000e +#define regk_gio_intr_pd21 0x0000000e +#define regk_gio_intr_pd22 0x0000000e +#define regk_gio_intr_pd23 0x0000000e +#define regk_gio_intr_pd24 0x0000000f +#define regk_gio_intr_pd25 0x0000000f +#define regk_gio_intr_pd26 0x0000000f +#define regk_gio_intr_pd27 0x0000000f +#define regk_gio_intr_pd28 0x0000000f +#define regk_gio_intr_pd29 0x0000000f +#define regk_gio_intr_pd3 0x0000000c +#define regk_gio_intr_pd30 0x0000000f +#define regk_gio_intr_pd31 0x0000000f +#define regk_gio_intr_pd4 0x0000000c +#define regk_gio_intr_pd5 0x0000000c +#define regk_gio_intr_pd6 0x0000000c +#define regk_gio_intr_pd7 0x0000000c +#define regk_gio_intr_pd8 0x0000000d +#define regk_gio_intr_pd9 0x0000000d +#define regk_gio_lo 0x00000002 +#define regk_gio_lsb 0x00000000 +#define regk_gio_msb 0x00000001 +#define regk_gio_negedge 0x00000006 +#define regk_gio_no 0x00000000 +#define regk_gio_no_switch 0x0000003f +#define regk_gio_none 0x00000007 +#define regk_gio_off 0x00000000 +#define regk_gio_opendrain 0x00000000 +#define regk_gio_out 0x00000001 +#define regk_gio_posedge 0x00000005 +#define regk_gio_pwm_hfp 0x00000002 +#define regk_gio_pwm_pa0 0x00000001 +#define regk_gio_pwm_pa19 0x00000004 +#define regk_gio_pwm_pa6 0x00000002 +#define regk_gio_pwm_pa7 0x00000003 +#define regk_gio_pwm_pb26 0x00000005 +#define regk_gio_pwm_pd23 0x00000006 +#define regk_gio_pwm_pd31 0x00000007 +#define regk_gio_pwm_std 0x00000001 +#define regk_gio_pwm_var 0x00000003 +#define regk_gio_rw_i2c0_cfg_default 0x00000020 +#define regk_gio_rw_i2c0_ctrl_default 0x00010000 +#define regk_gio_rw_i2c0_start_default 0x00000000 +#define regk_gio_rw_i2c1_cfg_default 0x00000aa0 +#define regk_gio_rw_i2c1_ctrl_default 0x00010000 +#define regk_gio_rw_i2c1_start_default 0x00000000 +#define regk_gio_rw_intr_cfg_default 0x00000000 +#define regk_gio_rw_intr_mask_default 0x00000000 +#define regk_gio_rw_pa_oe_default 0x00000000 +#define regk_gio_rw_pb_oe_default 0x00000000 +#define regk_gio_rw_pc_oe_default 0x00000000 +#define regk_gio_rw_ppwm_data_default 0x00000000 +#define regk_gio_rw_pwm0_ctrl_default 0x00000000 +#define regk_gio_rw_pwm1_ctrl_default 0x00000000 +#define regk_gio_rw_pwm2_ctrl_default 0x00000000 +#define regk_gio_rw_pwm_in_cfg_default 0x00000000 +#define regk_gio_sda0 0x00000000 +#define regk_gio_sda1 0x00000001 +#define regk_gio_sda2 0x00000002 +#define regk_gio_sda3 0x00000003 +#define regk_gio_sen 0x00000000 +#define regk_gio_set 0x00000003 +#define regk_gio_yes 0x00000001 +#endif /* __gio_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/pinmux_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/pinmux_defs_asm.h new file mode 100644 index 000000000000..c3dc9c666c46 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/pinmux_defs_asm.h @@ -0,0 +1,572 @@ +#ifndef __pinmux_defs_asm_h +#define __pinmux_defs_asm_h + +/* + * This file is autogenerated from + * file: pinmux.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile pinmux_defs_asm.h pinmux.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_hwprot, scope pinmux, type rw */ +#define reg_pinmux_rw_hwprot___eth___lsb 0 +#define reg_pinmux_rw_hwprot___eth___width 1 +#define reg_pinmux_rw_hwprot___eth___bit 0 +#define reg_pinmux_rw_hwprot___eth_mdio___lsb 1 +#define reg_pinmux_rw_hwprot___eth_mdio___width 1 +#define reg_pinmux_rw_hwprot___eth_mdio___bit 1 +#define reg_pinmux_rw_hwprot___geth___lsb 2 +#define reg_pinmux_rw_hwprot___geth___width 1 +#define reg_pinmux_rw_hwprot___geth___bit 2 +#define reg_pinmux_rw_hwprot___tg___lsb 3 +#define reg_pinmux_rw_hwprot___tg___width 1 +#define reg_pinmux_rw_hwprot___tg___bit 3 +#define reg_pinmux_rw_hwprot___tg_clk___lsb 4 +#define reg_pinmux_rw_hwprot___tg_clk___width 1 +#define reg_pinmux_rw_hwprot___tg_clk___bit 4 +#define reg_pinmux_rw_hwprot___vout___lsb 5 +#define reg_pinmux_rw_hwprot___vout___width 1 +#define reg_pinmux_rw_hwprot___vout___bit 5 +#define reg_pinmux_rw_hwprot___vout_sync___lsb 6 +#define reg_pinmux_rw_hwprot___vout_sync___width 1 +#define reg_pinmux_rw_hwprot___vout_sync___bit 6 +#define reg_pinmux_rw_hwprot___ser1___lsb 7 +#define reg_pinmux_rw_hwprot___ser1___width 1 +#define reg_pinmux_rw_hwprot___ser1___bit 7 +#define reg_pinmux_rw_hwprot___ser2___lsb 8 +#define reg_pinmux_rw_hwprot___ser2___width 1 +#define reg_pinmux_rw_hwprot___ser2___bit 8 +#define reg_pinmux_rw_hwprot___ser3___lsb 9 +#define reg_pinmux_rw_hwprot___ser3___width 1 +#define reg_pinmux_rw_hwprot___ser3___bit 9 +#define reg_pinmux_rw_hwprot___ser4___lsb 10 +#define reg_pinmux_rw_hwprot___ser4___width 1 +#define reg_pinmux_rw_hwprot___ser4___bit 10 +#define reg_pinmux_rw_hwprot___sser___lsb 11 +#define reg_pinmux_rw_hwprot___sser___width 1 +#define reg_pinmux_rw_hwprot___sser___bit 11 +#define reg_pinmux_rw_hwprot___pwm0___lsb 12 +#define reg_pinmux_rw_hwprot___pwm0___width 1 +#define reg_pinmux_rw_hwprot___pwm0___bit 12 +#define reg_pinmux_rw_hwprot___pwm1___lsb 13 +#define reg_pinmux_rw_hwprot___pwm1___width 1 +#define reg_pinmux_rw_hwprot___pwm1___bit 13 +#define reg_pinmux_rw_hwprot___pwm2___lsb 14 +#define reg_pinmux_rw_hwprot___pwm2___width 1 +#define reg_pinmux_rw_hwprot___pwm2___bit 14 +#define reg_pinmux_rw_hwprot___timer0___lsb 15 +#define reg_pinmux_rw_hwprot___timer0___width 1 +#define reg_pinmux_rw_hwprot___timer0___bit 15 +#define reg_pinmux_rw_hwprot___timer1___lsb 16 +#define reg_pinmux_rw_hwprot___timer1___width 1 +#define reg_pinmux_rw_hwprot___timer1___bit 16 +#define reg_pinmux_rw_hwprot___pio___lsb 17 +#define reg_pinmux_rw_hwprot___pio___width 1 +#define reg_pinmux_rw_hwprot___pio___bit 17 +#define reg_pinmux_rw_hwprot___i2c0___lsb 18 +#define reg_pinmux_rw_hwprot___i2c0___width 1 +#define reg_pinmux_rw_hwprot___i2c0___bit 18 +#define reg_pinmux_rw_hwprot___i2c1___lsb 19 +#define reg_pinmux_rw_hwprot___i2c1___width 1 +#define reg_pinmux_rw_hwprot___i2c1___bit 19 +#define reg_pinmux_rw_hwprot___i2c1_sda1___lsb 20 +#define reg_pinmux_rw_hwprot___i2c1_sda1___width 1 +#define reg_pinmux_rw_hwprot___i2c1_sda1___bit 20 +#define reg_pinmux_rw_hwprot___i2c1_sda2___lsb 21 +#define reg_pinmux_rw_hwprot___i2c1_sda2___width 1 +#define reg_pinmux_rw_hwprot___i2c1_sda2___bit 21 +#define reg_pinmux_rw_hwprot___i2c1_sda3___lsb 22 +#define reg_pinmux_rw_hwprot___i2c1_sda3___width 1 +#define reg_pinmux_rw_hwprot___i2c1_sda3___bit 22 +#define reg_pinmux_rw_hwprot___i2c1_sen___lsb 23 +#define reg_pinmux_rw_hwprot___i2c1_sen___width 1 +#define reg_pinmux_rw_hwprot___i2c1_sen___bit 23 +#define reg_pinmux_rw_hwprot_offset 0 + +/* Register rw_gio_pa, scope pinmux, type rw */ +#define reg_pinmux_rw_gio_pa___pa0___lsb 0 +#define reg_pinmux_rw_gio_pa___pa0___width 1 +#define reg_pinmux_rw_gio_pa___pa0___bit 0 +#define reg_pinmux_rw_gio_pa___pa1___lsb 1 +#define reg_pinmux_rw_gio_pa___pa1___width 1 +#define reg_pinmux_rw_gio_pa___pa1___bit 1 +#define reg_pinmux_rw_gio_pa___pa2___lsb 2 +#define reg_pinmux_rw_gio_pa___pa2___width 1 +#define reg_pinmux_rw_gio_pa___pa2___bit 2 +#define reg_pinmux_rw_gio_pa___pa3___lsb 3 +#define reg_pinmux_rw_gio_pa___pa3___width 1 +#define reg_pinmux_rw_gio_pa___pa3___bit 3 +#define reg_pinmux_rw_gio_pa___pa4___lsb 4 +#define reg_pinmux_rw_gio_pa___pa4___width 1 +#define reg_pinmux_rw_gio_pa___pa4___bit 4 +#define reg_pinmux_rw_gio_pa___pa5___lsb 5 +#define reg_pinmux_rw_gio_pa___pa5___width 1 +#define reg_pinmux_rw_gio_pa___pa5___bit 5 +#define reg_pinmux_rw_gio_pa___pa6___lsb 6 +#define reg_pinmux_rw_gio_pa___pa6___width 1 +#define reg_pinmux_rw_gio_pa___pa6___bit 6 +#define reg_pinmux_rw_gio_pa___pa7___lsb 7 +#define reg_pinmux_rw_gio_pa___pa7___width 1 +#define reg_pinmux_rw_gio_pa___pa7___bit 7 +#define reg_pinmux_rw_gio_pa___pa8___lsb 8 +#define reg_pinmux_rw_gio_pa___pa8___width 1 +#define reg_pinmux_rw_gio_pa___pa8___bit 8 +#define reg_pinmux_rw_gio_pa___pa9___lsb 9 +#define reg_pinmux_rw_gio_pa___pa9___width 1 +#define reg_pinmux_rw_gio_pa___pa9___bit 9 +#define reg_pinmux_rw_gio_pa___pa10___lsb 10 +#define reg_pinmux_rw_gio_pa___pa10___width 1 +#define reg_pinmux_rw_gio_pa___pa10___bit 10 +#define reg_pinmux_rw_gio_pa___pa11___lsb 11 +#define reg_pinmux_rw_gio_pa___pa11___width 1 +#define reg_pinmux_rw_gio_pa___pa11___bit 11 +#define reg_pinmux_rw_gio_pa___pa12___lsb 12 +#define reg_pinmux_rw_gio_pa___pa12___width 1 +#define reg_pinmux_rw_gio_pa___pa12___bit 12 +#define reg_pinmux_rw_gio_pa___pa13___lsb 13 +#define reg_pinmux_rw_gio_pa___pa13___width 1 +#define reg_pinmux_rw_gio_pa___pa13___bit 13 +#define reg_pinmux_rw_gio_pa___pa14___lsb 14 +#define reg_pinmux_rw_gio_pa___pa14___width 1 +#define reg_pinmux_rw_gio_pa___pa14___bit 14 +#define reg_pinmux_rw_gio_pa___pa15___lsb 15 +#define reg_pinmux_rw_gio_pa___pa15___width 1 +#define reg_pinmux_rw_gio_pa___pa15___bit 15 +#define reg_pinmux_rw_gio_pa___pa16___lsb 16 +#define reg_pinmux_rw_gio_pa___pa16___width 1 +#define reg_pinmux_rw_gio_pa___pa16___bit 16 +#define reg_pinmux_rw_gio_pa___pa17___lsb 17 +#define reg_pinmux_rw_gio_pa___pa17___width 1 +#define reg_pinmux_rw_gio_pa___pa17___bit 17 +#define reg_pinmux_rw_gio_pa___pa18___lsb 18 +#define reg_pinmux_rw_gio_pa___pa18___width 1 +#define reg_pinmux_rw_gio_pa___pa18___bit 18 +#define reg_pinmux_rw_gio_pa___pa19___lsb 19 +#define reg_pinmux_rw_gio_pa___pa19___width 1 +#define reg_pinmux_rw_gio_pa___pa19___bit 19 +#define reg_pinmux_rw_gio_pa___pa20___lsb 20 +#define reg_pinmux_rw_gio_pa___pa20___width 1 +#define reg_pinmux_rw_gio_pa___pa20___bit 20 +#define reg_pinmux_rw_gio_pa___pa21___lsb 21 +#define reg_pinmux_rw_gio_pa___pa21___width 1 +#define reg_pinmux_rw_gio_pa___pa21___bit 21 +#define reg_pinmux_rw_gio_pa___pa22___lsb 22 +#define reg_pinmux_rw_gio_pa___pa22___width 1 +#define reg_pinmux_rw_gio_pa___pa22___bit 22 +#define reg_pinmux_rw_gio_pa___pa23___lsb 23 +#define reg_pinmux_rw_gio_pa___pa23___width 1 +#define reg_pinmux_rw_gio_pa___pa23___bit 23 +#define reg_pinmux_rw_gio_pa___pa24___lsb 24 +#define reg_pinmux_rw_gio_pa___pa24___width 1 +#define reg_pinmux_rw_gio_pa___pa24___bit 24 +#define reg_pinmux_rw_gio_pa___pa25___lsb 25 +#define reg_pinmux_rw_gio_pa___pa25___width 1 +#define reg_pinmux_rw_gio_pa___pa25___bit 25 +#define reg_pinmux_rw_gio_pa___pa26___lsb 26 +#define reg_pinmux_rw_gio_pa___pa26___width 1 +#define reg_pinmux_rw_gio_pa___pa26___bit 26 +#define reg_pinmux_rw_gio_pa___pa27___lsb 27 +#define reg_pinmux_rw_gio_pa___pa27___width 1 +#define reg_pinmux_rw_gio_pa___pa27___bit 27 +#define reg_pinmux_rw_gio_pa___pa28___lsb 28 +#define reg_pinmux_rw_gio_pa___pa28___width 1 +#define reg_pinmux_rw_gio_pa___pa28___bit 28 +#define reg_pinmux_rw_gio_pa___pa29___lsb 29 +#define reg_pinmux_rw_gio_pa___pa29___width 1 +#define reg_pinmux_rw_gio_pa___pa29___bit 29 +#define reg_pinmux_rw_gio_pa___pa30___lsb 30 +#define reg_pinmux_rw_gio_pa___pa30___width 1 +#define reg_pinmux_rw_gio_pa___pa30___bit 30 +#define reg_pinmux_rw_gio_pa___pa31___lsb 31 +#define reg_pinmux_rw_gio_pa___pa31___width 1 +#define reg_pinmux_rw_gio_pa___pa31___bit 31 +#define reg_pinmux_rw_gio_pa_offset 4 + +/* Register rw_gio_pb, scope pinmux, type rw */ +#define reg_pinmux_rw_gio_pb___pb0___lsb 0 +#define reg_pinmux_rw_gio_pb___pb0___width 1 +#define reg_pinmux_rw_gio_pb___pb0___bit 0 +#define reg_pinmux_rw_gio_pb___pb1___lsb 1 +#define reg_pinmux_rw_gio_pb___pb1___width 1 +#define reg_pinmux_rw_gio_pb___pb1___bit 1 +#define reg_pinmux_rw_gio_pb___pb2___lsb 2 +#define reg_pinmux_rw_gio_pb___pb2___width 1 +#define reg_pinmux_rw_gio_pb___pb2___bit 2 +#define reg_pinmux_rw_gio_pb___pb3___lsb 3 +#define reg_pinmux_rw_gio_pb___pb3___width 1 +#define reg_pinmux_rw_gio_pb___pb3___bit 3 +#define reg_pinmux_rw_gio_pb___pb4___lsb 4 +#define reg_pinmux_rw_gio_pb___pb4___width 1 +#define reg_pinmux_rw_gio_pb___pb4___bit 4 +#define reg_pinmux_rw_gio_pb___pb5___lsb 5 +#define reg_pinmux_rw_gio_pb___pb5___width 1 +#define reg_pinmux_rw_gio_pb___pb5___bit 5 +#define reg_pinmux_rw_gio_pb___pb6___lsb 6 +#define reg_pinmux_rw_gio_pb___pb6___width 1 +#define reg_pinmux_rw_gio_pb___pb6___bit 6 +#define reg_pinmux_rw_gio_pb___pb7___lsb 7 +#define reg_pinmux_rw_gio_pb___pb7___width 1 +#define reg_pinmux_rw_gio_pb___pb7___bit 7 +#define reg_pinmux_rw_gio_pb___pb8___lsb 8 +#define reg_pinmux_rw_gio_pb___pb8___width 1 +#define reg_pinmux_rw_gio_pb___pb8___bit 8 +#define reg_pinmux_rw_gio_pb___pb9___lsb 9 +#define reg_pinmux_rw_gio_pb___pb9___width 1 +#define reg_pinmux_rw_gio_pb___pb9___bit 9 +#define reg_pinmux_rw_gio_pb___pb10___lsb 10 +#define reg_pinmux_rw_gio_pb___pb10___width 1 +#define reg_pinmux_rw_gio_pb___pb10___bit 10 +#define reg_pinmux_rw_gio_pb___pb11___lsb 11 +#define reg_pinmux_rw_gio_pb___pb11___width 1 +#define reg_pinmux_rw_gio_pb___pb11___bit 11 +#define reg_pinmux_rw_gio_pb___pb12___lsb 12 +#define reg_pinmux_rw_gio_pb___pb12___width 1 +#define reg_pinmux_rw_gio_pb___pb12___bit 12 +#define reg_pinmux_rw_gio_pb___pb13___lsb 13 +#define reg_pinmux_rw_gio_pb___pb13___width 1 +#define reg_pinmux_rw_gio_pb___pb13___bit 13 +#define reg_pinmux_rw_gio_pb___pb14___lsb 14 +#define reg_pinmux_rw_gio_pb___pb14___width 1 +#define reg_pinmux_rw_gio_pb___pb14___bit 14 +#define reg_pinmux_rw_gio_pb___pb15___lsb 15 +#define reg_pinmux_rw_gio_pb___pb15___width 1 +#define reg_pinmux_rw_gio_pb___pb15___bit 15 +#define reg_pinmux_rw_gio_pb___pb16___lsb 16 +#define reg_pinmux_rw_gio_pb___pb16___width 1 +#define reg_pinmux_rw_gio_pb___pb16___bit 16 +#define reg_pinmux_rw_gio_pb___pb17___lsb 17 +#define reg_pinmux_rw_gio_pb___pb17___width 1 +#define reg_pinmux_rw_gio_pb___pb17___bit 17 +#define reg_pinmux_rw_gio_pb___pb18___lsb 18 +#define reg_pinmux_rw_gio_pb___pb18___width 1 +#define reg_pinmux_rw_gio_pb___pb18___bit 18 +#define reg_pinmux_rw_gio_pb___pb19___lsb 19 +#define reg_pinmux_rw_gio_pb___pb19___width 1 +#define reg_pinmux_rw_gio_pb___pb19___bit 19 +#define reg_pinmux_rw_gio_pb___pb20___lsb 20 +#define reg_pinmux_rw_gio_pb___pb20___width 1 +#define reg_pinmux_rw_gio_pb___pb20___bit 20 +#define reg_pinmux_rw_gio_pb___pb21___lsb 21 +#define reg_pinmux_rw_gio_pb___pb21___width 1 +#define reg_pinmux_rw_gio_pb___pb21___bit 21 +#define reg_pinmux_rw_gio_pb___pb22___lsb 22 +#define reg_pinmux_rw_gio_pb___pb22___width 1 +#define reg_pinmux_rw_gio_pb___pb22___bit 22 +#define reg_pinmux_rw_gio_pb___pb23___lsb 23 +#define reg_pinmux_rw_gio_pb___pb23___width 1 +#define reg_pinmux_rw_gio_pb___pb23___bit 23 +#define reg_pinmux_rw_gio_pb___pb24___lsb 24 +#define reg_pinmux_rw_gio_pb___pb24___width 1 +#define reg_pinmux_rw_gio_pb___pb24___bit 24 +#define reg_pinmux_rw_gio_pb___pb25___lsb 25 +#define reg_pinmux_rw_gio_pb___pb25___width 1 +#define reg_pinmux_rw_gio_pb___pb25___bit 25 +#define reg_pinmux_rw_gio_pb___pb26___lsb 26 +#define reg_pinmux_rw_gio_pb___pb26___width 1 +#define reg_pinmux_rw_gio_pb___pb26___bit 26 +#define reg_pinmux_rw_gio_pb___pb27___lsb 27 +#define reg_pinmux_rw_gio_pb___pb27___width 1 +#define reg_pinmux_rw_gio_pb___pb27___bit 27 +#define reg_pinmux_rw_gio_pb___pb28___lsb 28 +#define reg_pinmux_rw_gio_pb___pb28___width 1 +#define reg_pinmux_rw_gio_pb___pb28___bit 28 +#define reg_pinmux_rw_gio_pb___pb29___lsb 29 +#define reg_pinmux_rw_gio_pb___pb29___width 1 +#define reg_pinmux_rw_gio_pb___pb29___bit 29 +#define reg_pinmux_rw_gio_pb___pb30___lsb 30 +#define reg_pinmux_rw_gio_pb___pb30___width 1 +#define reg_pinmux_rw_gio_pb___pb30___bit 30 +#define reg_pinmux_rw_gio_pb___pb31___lsb 31 +#define reg_pinmux_rw_gio_pb___pb31___width 1 +#define reg_pinmux_rw_gio_pb___pb31___bit 31 +#define reg_pinmux_rw_gio_pb_offset 8 + +/* Register rw_gio_pc, scope pinmux, type rw */ +#define reg_pinmux_rw_gio_pc___pc0___lsb 0 +#define reg_pinmux_rw_gio_pc___pc0___width 1 +#define reg_pinmux_rw_gio_pc___pc0___bit 0 +#define reg_pinmux_rw_gio_pc___pc1___lsb 1 +#define reg_pinmux_rw_gio_pc___pc1___width 1 +#define reg_pinmux_rw_gio_pc___pc1___bit 1 +#define reg_pinmux_rw_gio_pc___pc2___lsb 2 +#define reg_pinmux_rw_gio_pc___pc2___width 1 +#define reg_pinmux_rw_gio_pc___pc2___bit 2 +#define reg_pinmux_rw_gio_pc___pc3___lsb 3 +#define reg_pinmux_rw_gio_pc___pc3___width 1 +#define reg_pinmux_rw_gio_pc___pc3___bit 3 +#define reg_pinmux_rw_gio_pc___pc4___lsb 4 +#define reg_pinmux_rw_gio_pc___pc4___width 1 +#define reg_pinmux_rw_gio_pc___pc4___bit 4 +#define reg_pinmux_rw_gio_pc___pc5___lsb 5 +#define reg_pinmux_rw_gio_pc___pc5___width 1 +#define reg_pinmux_rw_gio_pc___pc5___bit 5 +#define reg_pinmux_rw_gio_pc___pc6___lsb 6 +#define reg_pinmux_rw_gio_pc___pc6___width 1 +#define reg_pinmux_rw_gio_pc___pc6___bit 6 +#define reg_pinmux_rw_gio_pc___pc7___lsb 7 +#define reg_pinmux_rw_gio_pc___pc7___width 1 +#define reg_pinmux_rw_gio_pc___pc7___bit 7 +#define reg_pinmux_rw_gio_pc___pc8___lsb 8 +#define reg_pinmux_rw_gio_pc___pc8___width 1 +#define reg_pinmux_rw_gio_pc___pc8___bit 8 +#define reg_pinmux_rw_gio_pc___pc9___lsb 9 +#define reg_pinmux_rw_gio_pc___pc9___width 1 +#define reg_pinmux_rw_gio_pc___pc9___bit 9 +#define reg_pinmux_rw_gio_pc___pc10___lsb 10 +#define reg_pinmux_rw_gio_pc___pc10___width 1 +#define reg_pinmux_rw_gio_pc___pc10___bit 10 +#define reg_pinmux_rw_gio_pc___pc11___lsb 11 +#define reg_pinmux_rw_gio_pc___pc11___width 1 +#define reg_pinmux_rw_gio_pc___pc11___bit 11 +#define reg_pinmux_rw_gio_pc___pc12___lsb 12 +#define reg_pinmux_rw_gio_pc___pc12___width 1 +#define reg_pinmux_rw_gio_pc___pc12___bit 12 +#define reg_pinmux_rw_gio_pc___pc13___lsb 13 +#define reg_pinmux_rw_gio_pc___pc13___width 1 +#define reg_pinmux_rw_gio_pc___pc13___bit 13 +#define reg_pinmux_rw_gio_pc___pc14___lsb 14 +#define reg_pinmux_rw_gio_pc___pc14___width 1 +#define reg_pinmux_rw_gio_pc___pc14___bit 14 +#define reg_pinmux_rw_gio_pc___pc15___lsb 15 +#define reg_pinmux_rw_gio_pc___pc15___width 1 +#define reg_pinmux_rw_gio_pc___pc15___bit 15 +#define reg_pinmux_rw_gio_pc_offset 12 + +/* Register rw_iop_pa, scope pinmux, type rw */ +#define reg_pinmux_rw_iop_pa___pa0___lsb 0 +#define reg_pinmux_rw_iop_pa___pa0___width 1 +#define reg_pinmux_rw_iop_pa___pa0___bit 0 +#define reg_pinmux_rw_iop_pa___pa1___lsb 1 +#define reg_pinmux_rw_iop_pa___pa1___width 1 +#define reg_pinmux_rw_iop_pa___pa1___bit 1 +#define reg_pinmux_rw_iop_pa___pa2___lsb 2 +#define reg_pinmux_rw_iop_pa___pa2___width 1 +#define reg_pinmux_rw_iop_pa___pa2___bit 2 +#define reg_pinmux_rw_iop_pa___pa3___lsb 3 +#define reg_pinmux_rw_iop_pa___pa3___width 1 +#define reg_pinmux_rw_iop_pa___pa3___bit 3 +#define reg_pinmux_rw_iop_pa___pa4___lsb 4 +#define reg_pinmux_rw_iop_pa___pa4___width 1 +#define reg_pinmux_rw_iop_pa___pa4___bit 4 +#define reg_pinmux_rw_iop_pa___pa5___lsb 5 +#define reg_pinmux_rw_iop_pa___pa5___width 1 +#define reg_pinmux_rw_iop_pa___pa5___bit 5 +#define reg_pinmux_rw_iop_pa___pa6___lsb 6 +#define reg_pinmux_rw_iop_pa___pa6___width 1 +#define reg_pinmux_rw_iop_pa___pa6___bit 6 +#define reg_pinmux_rw_iop_pa___pa7___lsb 7 +#define reg_pinmux_rw_iop_pa___pa7___width 1 +#define reg_pinmux_rw_iop_pa___pa7___bit 7 +#define reg_pinmux_rw_iop_pa___pa8___lsb 8 +#define reg_pinmux_rw_iop_pa___pa8___width 1 +#define reg_pinmux_rw_iop_pa___pa8___bit 8 +#define reg_pinmux_rw_iop_pa___pa9___lsb 9 +#define reg_pinmux_rw_iop_pa___pa9___width 1 +#define reg_pinmux_rw_iop_pa___pa9___bit 9 +#define reg_pinmux_rw_iop_pa___pa10___lsb 10 +#define reg_pinmux_rw_iop_pa___pa10___width 1 +#define reg_pinmux_rw_iop_pa___pa10___bit 10 +#define reg_pinmux_rw_iop_pa___pa11___lsb 11 +#define reg_pinmux_rw_iop_pa___pa11___width 1 +#define reg_pinmux_rw_iop_pa___pa11___bit 11 +#define reg_pinmux_rw_iop_pa___pa12___lsb 12 +#define reg_pinmux_rw_iop_pa___pa12___width 1 +#define reg_pinmux_rw_iop_pa___pa12___bit 12 +#define reg_pinmux_rw_iop_pa___pa13___lsb 13 +#define reg_pinmux_rw_iop_pa___pa13___width 1 +#define reg_pinmux_rw_iop_pa___pa13___bit 13 +#define reg_pinmux_rw_iop_pa___pa14___lsb 14 +#define reg_pinmux_rw_iop_pa___pa14___width 1 +#define reg_pinmux_rw_iop_pa___pa14___bit 14 +#define reg_pinmux_rw_iop_pa___pa15___lsb 15 +#define reg_pinmux_rw_iop_pa___pa15___width 1 +#define reg_pinmux_rw_iop_pa___pa15___bit 15 +#define reg_pinmux_rw_iop_pa___pa16___lsb 16 +#define reg_pinmux_rw_iop_pa___pa16___width 1 +#define reg_pinmux_rw_iop_pa___pa16___bit 16 +#define reg_pinmux_rw_iop_pa___pa17___lsb 17 +#define reg_pinmux_rw_iop_pa___pa17___width 1 +#define reg_pinmux_rw_iop_pa___pa17___bit 17 +#define reg_pinmux_rw_iop_pa___pa18___lsb 18 +#define reg_pinmux_rw_iop_pa___pa18___width 1 +#define reg_pinmux_rw_iop_pa___pa18___bit 18 +#define reg_pinmux_rw_iop_pa___pa19___lsb 19 +#define reg_pinmux_rw_iop_pa___pa19___width 1 +#define reg_pinmux_rw_iop_pa___pa19___bit 19 +#define reg_pinmux_rw_iop_pa___pa20___lsb 20 +#define reg_pinmux_rw_iop_pa___pa20___width 1 +#define reg_pinmux_rw_iop_pa___pa20___bit 20 +#define reg_pinmux_rw_iop_pa___pa21___lsb 21 +#define reg_pinmux_rw_iop_pa___pa21___width 1 +#define reg_pinmux_rw_iop_pa___pa21___bit 21 +#define reg_pinmux_rw_iop_pa___pa22___lsb 22 +#define reg_pinmux_rw_iop_pa___pa22___width 1 +#define reg_pinmux_rw_iop_pa___pa22___bit 22 +#define reg_pinmux_rw_iop_pa___pa23___lsb 23 +#define reg_pinmux_rw_iop_pa___pa23___width 1 +#define reg_pinmux_rw_iop_pa___pa23___bit 23 +#define reg_pinmux_rw_iop_pa___pa24___lsb 24 +#define reg_pinmux_rw_iop_pa___pa24___width 1 +#define reg_pinmux_rw_iop_pa___pa24___bit 24 +#define reg_pinmux_rw_iop_pa___pa25___lsb 25 +#define reg_pinmux_rw_iop_pa___pa25___width 1 +#define reg_pinmux_rw_iop_pa___pa25___bit 25 +#define reg_pinmux_rw_iop_pa___pa26___lsb 26 +#define reg_pinmux_rw_iop_pa___pa26___width 1 +#define reg_pinmux_rw_iop_pa___pa26___bit 26 +#define reg_pinmux_rw_iop_pa___pa27___lsb 27 +#define reg_pinmux_rw_iop_pa___pa27___width 1 +#define reg_pinmux_rw_iop_pa___pa27___bit 27 +#define reg_pinmux_rw_iop_pa___pa28___lsb 28 +#define reg_pinmux_rw_iop_pa___pa28___width 1 +#define reg_pinmux_rw_iop_pa___pa28___bit 28 +#define reg_pinmux_rw_iop_pa___pa29___lsb 29 +#define reg_pinmux_rw_iop_pa___pa29___width 1 +#define reg_pinmux_rw_iop_pa___pa29___bit 29 +#define reg_pinmux_rw_iop_pa___pa30___lsb 30 +#define reg_pinmux_rw_iop_pa___pa30___width 1 +#define reg_pinmux_rw_iop_pa___pa30___bit 30 +#define reg_pinmux_rw_iop_pa___pa31___lsb 31 +#define reg_pinmux_rw_iop_pa___pa31___width 1 +#define reg_pinmux_rw_iop_pa___pa31___bit 31 +#define reg_pinmux_rw_iop_pa_offset 16 + +/* Register rw_iop_pb, scope pinmux, type rw */ +#define reg_pinmux_rw_iop_pb___pb0___lsb 0 +#define reg_pinmux_rw_iop_pb___pb0___width 1 +#define reg_pinmux_rw_iop_pb___pb0___bit 0 +#define reg_pinmux_rw_iop_pb___pb1___lsb 1 +#define reg_pinmux_rw_iop_pb___pb1___width 1 +#define reg_pinmux_rw_iop_pb___pb1___bit 1 +#define reg_pinmux_rw_iop_pb___pb2___lsb 2 +#define reg_pinmux_rw_iop_pb___pb2___width 1 +#define reg_pinmux_rw_iop_pb___pb2___bit 2 +#define reg_pinmux_rw_iop_pb___pb3___lsb 3 +#define reg_pinmux_rw_iop_pb___pb3___width 1 +#define reg_pinmux_rw_iop_pb___pb3___bit 3 +#define reg_pinmux_rw_iop_pb___pb4___lsb 4 +#define reg_pinmux_rw_iop_pb___pb4___width 1 +#define reg_pinmux_rw_iop_pb___pb4___bit 4 +#define reg_pinmux_rw_iop_pb___pb5___lsb 5 +#define reg_pinmux_rw_iop_pb___pb5___width 1 +#define reg_pinmux_rw_iop_pb___pb5___bit 5 +#define reg_pinmux_rw_iop_pb___pb6___lsb 6 +#define reg_pinmux_rw_iop_pb___pb6___width 1 +#define reg_pinmux_rw_iop_pb___pb6___bit 6 +#define reg_pinmux_rw_iop_pb___pb7___lsb 7 +#define reg_pinmux_rw_iop_pb___pb7___width 1 +#define reg_pinmux_rw_iop_pb___pb7___bit 7 +#define reg_pinmux_rw_iop_pb_offset 20 + +/* Register rw_iop_pio, scope pinmux, type rw */ +#define reg_pinmux_rw_iop_pio___d0___lsb 0 +#define reg_pinmux_rw_iop_pio___d0___width 1 +#define reg_pinmux_rw_iop_pio___d0___bit 0 +#define reg_pinmux_rw_iop_pio___d1___lsb 1 +#define reg_pinmux_rw_iop_pio___d1___width 1 +#define reg_pinmux_rw_iop_pio___d1___bit 1 +#define reg_pinmux_rw_iop_pio___d2___lsb 2 +#define reg_pinmux_rw_iop_pio___d2___width 1 +#define reg_pinmux_rw_iop_pio___d2___bit 2 +#define reg_pinmux_rw_iop_pio___d3___lsb 3 +#define reg_pinmux_rw_iop_pio___d3___width 1 +#define reg_pinmux_rw_iop_pio___d3___bit 3 +#define reg_pinmux_rw_iop_pio___d4___lsb 4 +#define reg_pinmux_rw_iop_pio___d4___width 1 +#define reg_pinmux_rw_iop_pio___d4___bit 4 +#define reg_pinmux_rw_iop_pio___d5___lsb 5 +#define reg_pinmux_rw_iop_pio___d5___width 1 +#define reg_pinmux_rw_iop_pio___d5___bit 5 +#define reg_pinmux_rw_iop_pio___d6___lsb 6 +#define reg_pinmux_rw_iop_pio___d6___width 1 +#define reg_pinmux_rw_iop_pio___d6___bit 6 +#define reg_pinmux_rw_iop_pio___d7___lsb 7 +#define reg_pinmux_rw_iop_pio___d7___width 1 +#define reg_pinmux_rw_iop_pio___d7___bit 7 +#define reg_pinmux_rw_iop_pio___rd_n___lsb 8 +#define reg_pinmux_rw_iop_pio___rd_n___width 1 +#define reg_pinmux_rw_iop_pio___rd_n___bit 8 +#define reg_pinmux_rw_iop_pio___wr_n___lsb 9 +#define reg_pinmux_rw_iop_pio___wr_n___width 1 +#define reg_pinmux_rw_iop_pio___wr_n___bit 9 +#define reg_pinmux_rw_iop_pio___a0___lsb 10 +#define reg_pinmux_rw_iop_pio___a0___width 1 +#define reg_pinmux_rw_iop_pio___a0___bit 10 +#define reg_pinmux_rw_iop_pio___a1___lsb 11 +#define reg_pinmux_rw_iop_pio___a1___width 1 +#define reg_pinmux_rw_iop_pio___a1___bit 11 +#define reg_pinmux_rw_iop_pio___ce0_n___lsb 12 +#define reg_pinmux_rw_iop_pio___ce0_n___width 1 +#define reg_pinmux_rw_iop_pio___ce0_n___bit 12 +#define reg_pinmux_rw_iop_pio___ce1_n___lsb 13 +#define reg_pinmux_rw_iop_pio___ce1_n___width 1 +#define reg_pinmux_rw_iop_pio___ce1_n___bit 13 +#define reg_pinmux_rw_iop_pio___ce2_n___lsb 14 +#define reg_pinmux_rw_iop_pio___ce2_n___width 1 +#define reg_pinmux_rw_iop_pio___ce2_n___bit 14 +#define reg_pinmux_rw_iop_pio___rdy___lsb 15 +#define reg_pinmux_rw_iop_pio___rdy___width 1 +#define reg_pinmux_rw_iop_pio___rdy___bit 15 +#define reg_pinmux_rw_iop_pio_offset 24 + +/* Register rw_iop_usb, scope pinmux, type rw */ +#define reg_pinmux_rw_iop_usb___usb0___lsb 0 +#define reg_pinmux_rw_iop_usb___usb0___width 1 +#define reg_pinmux_rw_iop_usb___usb0___bit 0 +#define reg_pinmux_rw_iop_usb_offset 28 + + +/* Constants */ +#define regk_pinmux_no 0x00000000 +#define regk_pinmux_rw_gio_pa_default 0x00000000 +#define regk_pinmux_rw_gio_pb_default 0x00000000 +#define regk_pinmux_rw_gio_pc_default 0x00000000 +#define regk_pinmux_rw_hwprot_default 0x00000000 +#define regk_pinmux_rw_iop_pa_default 0x00000000 +#define regk_pinmux_rw_iop_pb_default 0x00000000 +#define regk_pinmux_rw_iop_pio_default 0x00000000 +#define regk_pinmux_rw_iop_usb_default 0x00000001 +#define regk_pinmux_yes 0x00000001 +#endif /* __pinmux_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/pio_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/pio_defs_asm.h new file mode 100644 index 000000000000..3907ef4921c8 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/pio_defs_asm.h @@ -0,0 +1,337 @@ +#ifndef __pio_defs_asm_h +#define __pio_defs_asm_h + +/* + * This file is autogenerated from + * file: pio.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile pio_defs_asm.h pio.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_data, scope pio, type rw */ +#define reg_pio_rw_data_offset 64 + +/* Register rw_io_access0, scope pio, type rw */ +#define reg_pio_rw_io_access0___data___lsb 0 +#define reg_pio_rw_io_access0___data___width 8 +#define reg_pio_rw_io_access0_offset 0 + +/* Register rw_io_access1, scope pio, type rw */ +#define reg_pio_rw_io_access1___data___lsb 0 +#define reg_pio_rw_io_access1___data___width 8 +#define reg_pio_rw_io_access1_offset 4 + +/* Register rw_io_access2, scope pio, type rw */ +#define reg_pio_rw_io_access2___data___lsb 0 +#define reg_pio_rw_io_access2___data___width 8 +#define reg_pio_rw_io_access2_offset 8 + +/* Register rw_io_access3, scope pio, type rw */ +#define reg_pio_rw_io_access3___data___lsb 0 +#define reg_pio_rw_io_access3___data___width 8 +#define reg_pio_rw_io_access3_offset 12 + +/* Register rw_io_access4, scope pio, type rw */ +#define reg_pio_rw_io_access4___data___lsb 0 +#define reg_pio_rw_io_access4___data___width 8 +#define reg_pio_rw_io_access4_offset 16 + +/* Register rw_io_access5, scope pio, type rw */ +#define reg_pio_rw_io_access5___data___lsb 0 +#define reg_pio_rw_io_access5___data___width 8 +#define reg_pio_rw_io_access5_offset 20 + +/* Register rw_io_access6, scope pio, type rw */ +#define reg_pio_rw_io_access6___data___lsb 0 +#define reg_pio_rw_io_access6___data___width 8 +#define reg_pio_rw_io_access6_offset 24 + +/* Register rw_io_access7, scope pio, type rw */ +#define reg_pio_rw_io_access7___data___lsb 0 +#define reg_pio_rw_io_access7___data___width 8 +#define reg_pio_rw_io_access7_offset 28 + +/* Register rw_io_access8, scope pio, type rw */ +#define reg_pio_rw_io_access8___data___lsb 0 +#define reg_pio_rw_io_access8___data___width 8 +#define reg_pio_rw_io_access8_offset 32 + +/* Register rw_io_access9, scope pio, type rw */ +#define reg_pio_rw_io_access9___data___lsb 0 +#define reg_pio_rw_io_access9___data___width 8 +#define reg_pio_rw_io_access9_offset 36 + +/* Register rw_io_access10, scope pio, type rw */ +#define reg_pio_rw_io_access10___data___lsb 0 +#define reg_pio_rw_io_access10___data___width 8 +#define reg_pio_rw_io_access10_offset 40 + +/* Register rw_io_access11, scope pio, type rw */ +#define reg_pio_rw_io_access11___data___lsb 0 +#define reg_pio_rw_io_access11___data___width 8 +#define reg_pio_rw_io_access11_offset 44 + +/* Register rw_io_access12, scope pio, type rw */ +#define reg_pio_rw_io_access12___data___lsb 0 +#define reg_pio_rw_io_access12___data___width 8 +#define reg_pio_rw_io_access12_offset 48 + +/* Register rw_io_access13, scope pio, type rw */ +#define reg_pio_rw_io_access13___data___lsb 0 +#define reg_pio_rw_io_access13___data___width 8 +#define reg_pio_rw_io_access13_offset 52 + +/* Register rw_io_access14, scope pio, type rw */ +#define reg_pio_rw_io_access14___data___lsb 0 +#define reg_pio_rw_io_access14___data___width 8 +#define reg_pio_rw_io_access14_offset 56 + +/* Register rw_io_access15, scope pio, type rw */ +#define reg_pio_rw_io_access15___data___lsb 0 +#define reg_pio_rw_io_access15___data___width 8 +#define reg_pio_rw_io_access15_offset 60 + +/* Register rw_ce0_cfg, scope pio, type rw */ +#define reg_pio_rw_ce0_cfg___lw___lsb 0 +#define reg_pio_rw_ce0_cfg___lw___width 6 +#define reg_pio_rw_ce0_cfg___ew___lsb 6 +#define reg_pio_rw_ce0_cfg___ew___width 3 +#define reg_pio_rw_ce0_cfg___zw___lsb 9 +#define reg_pio_rw_ce0_cfg___zw___width 3 +#define reg_pio_rw_ce0_cfg___aw___lsb 12 +#define reg_pio_rw_ce0_cfg___aw___width 2 +#define reg_pio_rw_ce0_cfg___mode___lsb 14 +#define reg_pio_rw_ce0_cfg___mode___width 2 +#define reg_pio_rw_ce0_cfg_offset 68 + +/* Register rw_ce1_cfg, scope pio, type rw */ +#define reg_pio_rw_ce1_cfg___lw___lsb 0 +#define reg_pio_rw_ce1_cfg___lw___width 6 +#define reg_pio_rw_ce1_cfg___ew___lsb 6 +#define reg_pio_rw_ce1_cfg___ew___width 3 +#define reg_pio_rw_ce1_cfg___zw___lsb 9 +#define reg_pio_rw_ce1_cfg___zw___width 3 +#define reg_pio_rw_ce1_cfg___aw___lsb 12 +#define reg_pio_rw_ce1_cfg___aw___width 2 +#define reg_pio_rw_ce1_cfg___mode___lsb 14 +#define reg_pio_rw_ce1_cfg___mode___width 2 +#define reg_pio_rw_ce1_cfg_offset 72 + +/* Register rw_ce2_cfg, scope pio, type rw */ +#define reg_pio_rw_ce2_cfg___lw___lsb 0 +#define reg_pio_rw_ce2_cfg___lw___width 6 +#define reg_pio_rw_ce2_cfg___ew___lsb 6 +#define reg_pio_rw_ce2_cfg___ew___width 3 +#define reg_pio_rw_ce2_cfg___zw___lsb 9 +#define reg_pio_rw_ce2_cfg___zw___width 3 +#define reg_pio_rw_ce2_cfg___aw___lsb 12 +#define reg_pio_rw_ce2_cfg___aw___width 2 +#define reg_pio_rw_ce2_cfg___mode___lsb 14 +#define reg_pio_rw_ce2_cfg___mode___width 2 +#define reg_pio_rw_ce2_cfg_offset 76 + +/* Register rw_dout, scope pio, type rw */ +#define reg_pio_rw_dout___data___lsb 0 +#define reg_pio_rw_dout___data___width 8 +#define reg_pio_rw_dout___rd_n___lsb 8 +#define reg_pio_rw_dout___rd_n___width 1 +#define reg_pio_rw_dout___rd_n___bit 8 +#define reg_pio_rw_dout___wr_n___lsb 9 +#define reg_pio_rw_dout___wr_n___width 1 +#define reg_pio_rw_dout___wr_n___bit 9 +#define reg_pio_rw_dout___a0___lsb 10 +#define reg_pio_rw_dout___a0___width 1 +#define reg_pio_rw_dout___a0___bit 10 +#define reg_pio_rw_dout___a1___lsb 11 +#define reg_pio_rw_dout___a1___width 1 +#define reg_pio_rw_dout___a1___bit 11 +#define reg_pio_rw_dout___ce0_n___lsb 12 +#define reg_pio_rw_dout___ce0_n___width 1 +#define reg_pio_rw_dout___ce0_n___bit 12 +#define reg_pio_rw_dout___ce1_n___lsb 13 +#define reg_pio_rw_dout___ce1_n___width 1 +#define reg_pio_rw_dout___ce1_n___bit 13 +#define reg_pio_rw_dout___ce2_n___lsb 14 +#define reg_pio_rw_dout___ce2_n___width 1 +#define reg_pio_rw_dout___ce2_n___bit 14 +#define reg_pio_rw_dout___rdy___lsb 15 +#define reg_pio_rw_dout___rdy___width 1 +#define reg_pio_rw_dout___rdy___bit 15 +#define reg_pio_rw_dout_offset 80 + +/* Register rw_oe, scope pio, type rw */ +#define reg_pio_rw_oe___data___lsb 0 +#define reg_pio_rw_oe___data___width 8 +#define reg_pio_rw_oe___rd_n___lsb 8 +#define reg_pio_rw_oe___rd_n___width 1 +#define reg_pio_rw_oe___rd_n___bit 8 +#define reg_pio_rw_oe___wr_n___lsb 9 +#define reg_pio_rw_oe___wr_n___width 1 +#define reg_pio_rw_oe___wr_n___bit 9 +#define reg_pio_rw_oe___a0___lsb 10 +#define reg_pio_rw_oe___a0___width 1 +#define reg_pio_rw_oe___a0___bit 10 +#define reg_pio_rw_oe___a1___lsb 11 +#define reg_pio_rw_oe___a1___width 1 +#define reg_pio_rw_oe___a1___bit 11 +#define reg_pio_rw_oe___ce0_n___lsb 12 +#define reg_pio_rw_oe___ce0_n___width 1 +#define reg_pio_rw_oe___ce0_n___bit 12 +#define reg_pio_rw_oe___ce1_n___lsb 13 +#define reg_pio_rw_oe___ce1_n___width 1 +#define reg_pio_rw_oe___ce1_n___bit 13 +#define reg_pio_rw_oe___ce2_n___lsb 14 +#define reg_pio_rw_oe___ce2_n___width 1 +#define reg_pio_rw_oe___ce2_n___bit 14 +#define reg_pio_rw_oe___rdy___lsb 15 +#define reg_pio_rw_oe___rdy___width 1 +#define reg_pio_rw_oe___rdy___bit 15 +#define reg_pio_rw_oe_offset 84 + +/* Register rw_man_ctrl, scope pio, type rw */ +#define reg_pio_rw_man_ctrl___data___lsb 0 +#define reg_pio_rw_man_ctrl___data___width 8 +#define reg_pio_rw_man_ctrl___rd_n___lsb 8 +#define reg_pio_rw_man_ctrl___rd_n___width 1 +#define reg_pio_rw_man_ctrl___rd_n___bit 8 +#define reg_pio_rw_man_ctrl___wr_n___lsb 9 +#define reg_pio_rw_man_ctrl___wr_n___width 1 +#define reg_pio_rw_man_ctrl___wr_n___bit 9 +#define reg_pio_rw_man_ctrl___a0___lsb 10 +#define reg_pio_rw_man_ctrl___a0___width 1 +#define reg_pio_rw_man_ctrl___a0___bit 10 +#define reg_pio_rw_man_ctrl___a1___lsb 11 +#define reg_pio_rw_man_ctrl___a1___width 1 +#define reg_pio_rw_man_ctrl___a1___bit 11 +#define reg_pio_rw_man_ctrl___ce0_n___lsb 12 +#define reg_pio_rw_man_ctrl___ce0_n___width 1 +#define reg_pio_rw_man_ctrl___ce0_n___bit 12 +#define reg_pio_rw_man_ctrl___ce1_n___lsb 13 +#define reg_pio_rw_man_ctrl___ce1_n___width 1 +#define reg_pio_rw_man_ctrl___ce1_n___bit 13 +#define reg_pio_rw_man_ctrl___ce2_n___lsb 14 +#define reg_pio_rw_man_ctrl___ce2_n___width 1 +#define reg_pio_rw_man_ctrl___ce2_n___bit 14 +#define reg_pio_rw_man_ctrl___rdy___lsb 15 +#define reg_pio_rw_man_ctrl___rdy___width 1 +#define reg_pio_rw_man_ctrl___rdy___bit 15 +#define reg_pio_rw_man_ctrl_offset 88 + +/* Register r_din, scope pio, type r */ +#define reg_pio_r_din___data___lsb 0 +#define reg_pio_r_din___data___width 8 +#define reg_pio_r_din___rd_n___lsb 8 +#define reg_pio_r_din___rd_n___width 1 +#define reg_pio_r_din___rd_n___bit 8 +#define reg_pio_r_din___wr_n___lsb 9 +#define reg_pio_r_din___wr_n___width 1 +#define reg_pio_r_din___wr_n___bit 9 +#define reg_pio_r_din___a0___lsb 10 +#define reg_pio_r_din___a0___width 1 +#define reg_pio_r_din___a0___bit 10 +#define reg_pio_r_din___a1___lsb 11 +#define reg_pio_r_din___a1___width 1 +#define reg_pio_r_din___a1___bit 11 +#define reg_pio_r_din___ce0_n___lsb 12 +#define reg_pio_r_din___ce0_n___width 1 +#define reg_pio_r_din___ce0_n___bit 12 +#define reg_pio_r_din___ce1_n___lsb 13 +#define reg_pio_r_din___ce1_n___width 1 +#define reg_pio_r_din___ce1_n___bit 13 +#define reg_pio_r_din___ce2_n___lsb 14 +#define reg_pio_r_din___ce2_n___width 1 +#define reg_pio_r_din___ce2_n___bit 14 +#define reg_pio_r_din___rdy___lsb 15 +#define reg_pio_r_din___rdy___width 1 +#define reg_pio_r_din___rdy___bit 15 +#define reg_pio_r_din_offset 92 + +/* Register r_stat, scope pio, type r */ +#define reg_pio_r_stat___busy___lsb 0 +#define reg_pio_r_stat___busy___width 1 +#define reg_pio_r_stat___busy___bit 0 +#define reg_pio_r_stat_offset 96 + +/* Register rw_intr_mask, scope pio, type rw */ +#define reg_pio_rw_intr_mask___rdy___lsb 0 +#define reg_pio_rw_intr_mask___rdy___width 1 +#define reg_pio_rw_intr_mask___rdy___bit 0 +#define reg_pio_rw_intr_mask_offset 100 + +/* Register rw_ack_intr, scope pio, type rw */ +#define reg_pio_rw_ack_intr___rdy___lsb 0 +#define reg_pio_rw_ack_intr___rdy___width 1 +#define reg_pio_rw_ack_intr___rdy___bit 0 +#define reg_pio_rw_ack_intr_offset 104 + +/* Register r_intr, scope pio, type r */ +#define reg_pio_r_intr___rdy___lsb 0 +#define reg_pio_r_intr___rdy___width 1 +#define reg_pio_r_intr___rdy___bit 0 +#define reg_pio_r_intr_offset 108 + +/* Register r_masked_intr, scope pio, type r */ +#define reg_pio_r_masked_intr___rdy___lsb 0 +#define reg_pio_r_masked_intr___rdy___width 1 +#define reg_pio_r_masked_intr___rdy___bit 0 +#define reg_pio_r_masked_intr_offset 112 + + +/* Constants */ +#define regk_pio_a2 0x00000003 +#define regk_pio_no 0x00000000 +#define regk_pio_normal 0x00000000 +#define regk_pio_rd 0x00000001 +#define regk_pio_rw_ce0_cfg_default 0x00000000 +#define regk_pio_rw_ce1_cfg_default 0x00000000 +#define regk_pio_rw_ce2_cfg_default 0x00000000 +#define regk_pio_rw_intr_mask_default 0x00000000 +#define regk_pio_rw_man_ctrl_default 0x00000000 +#define regk_pio_rw_oe_default 0x00000000 +#define regk_pio_wr 0x00000002 +#define regk_pio_wr_ce2 0x00000003 +#define regk_pio_yes 0x00000001 +#define regk_pio_yes_all 0x000000ff +#endif /* __pio_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/reg_map_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/reg_map_asm.h new file mode 100644 index 000000000000..89439e9610e2 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/reg_map_asm.h @@ -0,0 +1,99 @@ +#ifndef __reg_map_asm_h +#define __reg_map_asm_h + +/* + * This file is autogenerated from + * file: reg.rmap + * + * by ../../../tools/rdesc/bin/rdes2c -asm -base 0xb0000000 -map marb_bar.r marb_foo.r ccd_top.r ccd_stat.r ccd_tg.r ccd_dp.r ccd.r iop_sap_in.r iop_sap_out.r iop_sw_cfg.r iop_sw_cpu.r iop_sw_mpu.r iop_sw_spu.r iop_version.r iop_crc_par.r iop_dmc_in.r iop_dmc_out.r iop_fifo_in_extra.r iop_fifo_in.r iop_fifo_out_extra.r iop_fifo_out.r iop_mc.r iop_mpu.r iop_scrc_in.r iop_scrc_out.r iop_spu.r iop_timer_grp.r iop_trigger_grp.r iop.r -outfile reg_map_asm.h reg.rmap + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +#define regi_ccd 0xb0000000 +#define regi_ccd_top 0xb0000000 +#define regi_ccd_dp 0xb0000400 +#define regi_ccd_stat 0xb0000800 +#define regi_ccd_tg 0xb0001000 +#define regi_cfg 0xb0002000 +#define regi_clkgen 0xb0004000 +#define regi_ddr2_ctrl 0xb0006000 +#define regi_dma0 0xb0008000 +#define regi_dma1 0xb000a000 +#define regi_dma11 0xb000c000 +#define regi_dma2 0xb000e000 +#define regi_dma3 0xb0010000 +#define regi_dma4 0xb0012000 +#define regi_dma5 0xb0014000 +#define regi_dma6 0xb0016000 +#define regi_dma7 0xb0018000 +#define regi_dma9 0xb001a000 +#define regi_eth 0xb001c000 +#define regi_gio 0xb0020000 +#define regi_h264 0xb0022000 +#define regi_hist 0xb0026000 +#define regi_iop 0xb0028000 +#define regi_iop_version 0xb0028000 +#define regi_iop_fifo_in_extra 0xb0028040 +#define regi_iop_fifo_out_extra 0xb0028080 +#define regi_iop_trigger_grp0 0xb00280c0 +#define regi_iop_trigger_grp1 0xb0028100 +#define regi_iop_trigger_grp2 0xb0028140 +#define regi_iop_trigger_grp3 0xb0028180 +#define regi_iop_trigger_grp4 0xb00281c0 +#define regi_iop_trigger_grp5 0xb0028200 +#define regi_iop_trigger_grp6 0xb0028240 +#define regi_iop_trigger_grp7 0xb0028280 +#define regi_iop_crc_par 0xb0028300 +#define regi_iop_dmc_in 0xb0028380 +#define regi_iop_dmc_out 0xb0028400 +#define regi_iop_fifo_in 0xb0028480 +#define regi_iop_fifo_out 0xb0028500 +#define regi_iop_scrc_in 0xb0028580 +#define regi_iop_scrc_out 0xb0028600 +#define regi_iop_timer_grp0 0xb0028680 +#define regi_iop_timer_grp1 0xb0028700 +#define regi_iop_sap_in 0xb0028800 +#define regi_iop_sap_out 0xb0028900 +#define regi_iop_spu 0xb0028a00 +#define regi_iop_sw_cfg 0xb0028b00 +#define regi_iop_sw_cpu 0xb0028c00 +#define regi_iop_sw_mpu 0xb0028d00 +#define regi_iop_sw_spu 0xb0028e00 +#define regi_iop_mpu 0xb0029000 +#define regi_irq 0xb002a000 +#define regi_jpeg 0xb002c000 +#define regi_l2cache 0xb0030000 +#define regi_marb_bar 0xb0032000 +#define regi_marb_bar_bp0 0xb0032140 +#define regi_marb_bar_bp1 0xb0032180 +#define regi_marb_bar_bp2 0xb00321c0 +#define regi_marb_bar_bp3 0xb0032200 +#define regi_marb_foo 0xb0034000 +#define regi_marb_foo_bp0 0xb0034280 +#define regi_marb_foo_bp1 0xb00342c0 +#define regi_marb_foo_bp2 0xb0034300 +#define regi_marb_foo_bp3 0xb0034340 +#define regi_pinmux 0xb0038000 +#define regi_pio 0xb0036000 +#define regi_sclr 0xb003a000 +#define regi_sclr_fifo 0xb003c000 +#define regi_ser0 0xb003e000 +#define regi_ser1 0xb0040000 +#define regi_ser2 0xb0042000 +#define regi_ser3 0xb0044000 +#define regi_ser4 0xb0046000 +#define regi_sser 0xb0048000 +#define regi_strcop 0xb004a000 +#define regi_strdma0 0xb004e000 +#define regi_strdma1 0xb0050000 +#define regi_strdma2 0xb0052000 +#define regi_strdma3 0xb0054000 +#define regi_strdma5 0xb0056000 +#define regi_strmux 0xb004c000 +#define regi_timer0 0xb0058000 +#define regi_timer1 0xb005a000 +#define regi_trace 0xb005c000 +#define regi_vin 0xb005e000 +#define regi_vout 0xb0060000 +#endif /* __reg_map_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/timer_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/timer_defs_asm.h new file mode 100644 index 000000000000..b129e826fc34 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/asm/timer_defs_asm.h @@ -0,0 +1,228 @@ +#ifndef __timer_defs_asm_h +#define __timer_defs_asm_h + +/* + * This file is autogenerated from + * file: timer.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile timer_defs_asm.h timer.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_tmr0_div, scope timer, type rw */ +#define reg_timer_rw_tmr0_div_offset 0 + +/* Register r_tmr0_data, scope timer, type r */ +#define reg_timer_r_tmr0_data_offset 4 + +/* Register rw_tmr0_ctrl, scope timer, type rw */ +#define reg_timer_rw_tmr0_ctrl___op___lsb 0 +#define reg_timer_rw_tmr0_ctrl___op___width 2 +#define reg_timer_rw_tmr0_ctrl___freq___lsb 2 +#define reg_timer_rw_tmr0_ctrl___freq___width 3 +#define reg_timer_rw_tmr0_ctrl_offset 8 + +/* Register rw_tmr1_div, scope timer, type rw */ +#define reg_timer_rw_tmr1_div_offset 16 + +/* Register r_tmr1_data, scope timer, type r */ +#define reg_timer_r_tmr1_data_offset 20 + +/* Register rw_tmr1_ctrl, scope timer, type rw */ +#define reg_timer_rw_tmr1_ctrl___op___lsb 0 +#define reg_timer_rw_tmr1_ctrl___op___width 2 +#define reg_timer_rw_tmr1_ctrl___freq___lsb 2 +#define reg_timer_rw_tmr1_ctrl___freq___width 3 +#define reg_timer_rw_tmr1_ctrl_offset 24 + +/* Register rs_cnt_data, scope timer, type rs */ +#define reg_timer_rs_cnt_data___tmr___lsb 0 +#define reg_timer_rs_cnt_data___tmr___width 24 +#define reg_timer_rs_cnt_data___cnt___lsb 24 +#define reg_timer_rs_cnt_data___cnt___width 8 +#define reg_timer_rs_cnt_data_offset 32 + +/* Register r_cnt_data, scope timer, type r */ +#define reg_timer_r_cnt_data___tmr___lsb 0 +#define reg_timer_r_cnt_data___tmr___width 24 +#define reg_timer_r_cnt_data___cnt___lsb 24 +#define reg_timer_r_cnt_data___cnt___width 8 +#define reg_timer_r_cnt_data_offset 36 + +/* Register rw_cnt_cfg, scope timer, type rw */ +#define reg_timer_rw_cnt_cfg___clk___lsb 0 +#define reg_timer_rw_cnt_cfg___clk___width 2 +#define reg_timer_rw_cnt_cfg_offset 40 + +/* Register rw_trig, scope timer, type rw */ +#define reg_timer_rw_trig_offset 48 + +/* Register rw_trig_cfg, scope timer, type rw */ +#define reg_timer_rw_trig_cfg___tmr___lsb 0 +#define reg_timer_rw_trig_cfg___tmr___width 2 +#define reg_timer_rw_trig_cfg_offset 52 + +/* Register r_time, scope timer, type r */ +#define reg_timer_r_time_offset 56 + +/* Register rw_out, scope timer, type rw */ +#define reg_timer_rw_out___tmr___lsb 0 +#define reg_timer_rw_out___tmr___width 2 +#define reg_timer_rw_out_offset 60 + +/* Register rw_wd_ctrl, scope timer, type rw */ +#define reg_timer_rw_wd_ctrl___cnt___lsb 0 +#define reg_timer_rw_wd_ctrl___cnt___width 8 +#define reg_timer_rw_wd_ctrl___cmd___lsb 8 +#define reg_timer_rw_wd_ctrl___cmd___width 1 +#define reg_timer_rw_wd_ctrl___cmd___bit 8 +#define reg_timer_rw_wd_ctrl___key___lsb 9 +#define reg_timer_rw_wd_ctrl___key___width 7 +#define reg_timer_rw_wd_ctrl_offset 64 + +/* Register r_wd_stat, scope timer, type r */ +#define reg_timer_r_wd_stat___cnt___lsb 0 +#define reg_timer_r_wd_stat___cnt___width 8 +#define reg_timer_r_wd_stat___cmd___lsb 8 +#define reg_timer_r_wd_stat___cmd___width 1 +#define reg_timer_r_wd_stat___cmd___bit 8 +#define reg_timer_r_wd_stat_offset 68 + +/* Register rw_intr_mask, scope timer, type rw */ +#define reg_timer_rw_intr_mask___tmr0___lsb 0 +#define reg_timer_rw_intr_mask___tmr0___width 1 +#define reg_timer_rw_intr_mask___tmr0___bit 0 +#define reg_timer_rw_intr_mask___tmr1___lsb 1 +#define reg_timer_rw_intr_mask___tmr1___width 1 +#define reg_timer_rw_intr_mask___tmr1___bit 1 +#define reg_timer_rw_intr_mask___cnt___lsb 2 +#define reg_timer_rw_intr_mask___cnt___width 1 +#define reg_timer_rw_intr_mask___cnt___bit 2 +#define reg_timer_rw_intr_mask___trig___lsb 3 +#define reg_timer_rw_intr_mask___trig___width 1 +#define reg_timer_rw_intr_mask___trig___bit 3 +#define reg_timer_rw_intr_mask_offset 72 + +/* Register rw_ack_intr, scope timer, type rw */ +#define reg_timer_rw_ack_intr___tmr0___lsb 0 +#define reg_timer_rw_ack_intr___tmr0___width 1 +#define reg_timer_rw_ack_intr___tmr0___bit 0 +#define reg_timer_rw_ack_intr___tmr1___lsb 1 +#define reg_timer_rw_ack_intr___tmr1___width 1 +#define reg_timer_rw_ack_intr___tmr1___bit 1 +#define reg_timer_rw_ack_intr___cnt___lsb 2 +#define reg_timer_rw_ack_intr___cnt___width 1 +#define reg_timer_rw_ack_intr___cnt___bit 2 +#define reg_timer_rw_ack_intr___trig___lsb 3 +#define reg_timer_rw_ack_intr___trig___width 1 +#define reg_timer_rw_ack_intr___trig___bit 3 +#define reg_timer_rw_ack_intr_offset 76 + +/* Register r_intr, scope timer, type r */ +#define reg_timer_r_intr___tmr0___lsb 0 +#define reg_timer_r_intr___tmr0___width 1 +#define reg_timer_r_intr___tmr0___bit 0 +#define reg_timer_r_intr___tmr1___lsb 1 +#define reg_timer_r_intr___tmr1___width 1 +#define reg_timer_r_intr___tmr1___bit 1 +#define reg_timer_r_intr___cnt___lsb 2 +#define reg_timer_r_intr___cnt___width 1 +#define reg_timer_r_intr___cnt___bit 2 +#define reg_timer_r_intr___trig___lsb 3 +#define reg_timer_r_intr___trig___width 1 +#define reg_timer_r_intr___trig___bit 3 +#define reg_timer_r_intr_offset 80 + +/* Register r_masked_intr, scope timer, type r */ +#define reg_timer_r_masked_intr___tmr0___lsb 0 +#define reg_timer_r_masked_intr___tmr0___width 1 +#define reg_timer_r_masked_intr___tmr0___bit 0 +#define reg_timer_r_masked_intr___tmr1___lsb 1 +#define reg_timer_r_masked_intr___tmr1___width 1 +#define reg_timer_r_masked_intr___tmr1___bit 1 +#define reg_timer_r_masked_intr___cnt___lsb 2 +#define reg_timer_r_masked_intr___cnt___width 1 +#define reg_timer_r_masked_intr___cnt___bit 2 +#define reg_timer_r_masked_intr___trig___lsb 3 +#define reg_timer_r_masked_intr___trig___width 1 +#define reg_timer_r_masked_intr___trig___bit 3 +#define reg_timer_r_masked_intr_offset 84 + +/* Register rw_test, scope timer, type rw */ +#define reg_timer_rw_test___dis___lsb 0 +#define reg_timer_rw_test___dis___width 1 +#define reg_timer_rw_test___dis___bit 0 +#define reg_timer_rw_test___en___lsb 1 +#define reg_timer_rw_test___en___width 1 +#define reg_timer_rw_test___en___bit 1 +#define reg_timer_rw_test_offset 88 + + +/* Constants */ +#define regk_timer_ext 0x00000001 +#define regk_timer_f100 0x00000007 +#define regk_timer_f29_493 0x00000004 +#define regk_timer_f32 0x00000005 +#define regk_timer_f32_768 0x00000006 +#define regk_timer_f90 0x00000003 +#define regk_timer_hold 0x00000001 +#define regk_timer_ld 0x00000000 +#define regk_timer_no 0x00000000 +#define regk_timer_off 0x00000000 +#define regk_timer_run 0x00000002 +#define regk_timer_rw_cnt_cfg_default 0x00000000 +#define regk_timer_rw_intr_mask_default 0x00000000 +#define regk_timer_rw_out_default 0x00000000 +#define regk_timer_rw_test_default 0x00000000 +#define regk_timer_rw_tmr0_ctrl_default 0x00000000 +#define regk_timer_rw_tmr1_ctrl_default 0x00000000 +#define regk_timer_rw_trig_cfg_default 0x00000000 +#define regk_timer_start 0x00000001 +#define regk_timer_stop 0x00000000 +#define regk_timer_time 0x00000001 +#define regk_timer_tmr0 0x00000002 +#define regk_timer_tmr1 0x00000003 +#define regk_timer_vclk 0x00000002 +#define regk_timer_yes 0x00000001 +#endif /* __timer_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/clkgen_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/clkgen_defs.h new file mode 100644 index 000000000000..c1e9ba93b3a3 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/clkgen_defs.h @@ -0,0 +1,159 @@ +#ifndef __clkgen_defs_h +#define __clkgen_defs_h + +/* + * This file is autogenerated from + * file: clkgen.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile clkgen_defs.h clkgen.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope clkgen */ + +/* Register r_bootsel, scope clkgen, type r */ +typedef struct { + unsigned int boot_mode : 5; + unsigned int intern_main_clk : 1; + unsigned int extern_usb2_clk : 1; + unsigned int dummy1 : 25; +} reg_clkgen_r_bootsel; +#define REG_RD_ADDR_clkgen_r_bootsel 0 + +/* Register rw_clk_ctrl, scope clkgen, type rw */ +typedef struct { + unsigned int pll : 1; + unsigned int cpu : 1; + unsigned int iop_usb : 1; + unsigned int vin : 1; + unsigned int sclr : 1; + unsigned int h264 : 1; + unsigned int ddr2 : 1; + unsigned int vout_hist : 1; + unsigned int eth : 1; + unsigned int ccd_tg_200 : 1; + unsigned int dma0_1_eth : 1; + unsigned int ccd_tg_100 : 1; + unsigned int jpeg : 1; + unsigned int sser_ser_dma6_7 : 1; + unsigned int strdma0_2_video : 1; + unsigned int dma2_3_strcop : 1; + unsigned int dma4_5_iop : 1; + unsigned int dma9_11 : 1; + unsigned int memarb_bar_ddr : 1; + unsigned int sclr_h264 : 1; + unsigned int dummy1 : 12; +} reg_clkgen_rw_clk_ctrl; +#define REG_RD_ADDR_clkgen_rw_clk_ctrl 4 +#define REG_WR_ADDR_clkgen_rw_clk_ctrl 4 + + +/* Constants */ +enum { + regk_clkgen_eth1000_rx = 0x0000000c, + regk_clkgen_eth1000_tx = 0x0000000e, + regk_clkgen_eth100_rx = 0x0000001d, + regk_clkgen_eth100_rx_half = 0x0000001c, + regk_clkgen_eth100_tx = 0x0000001f, + regk_clkgen_eth100_tx_half = 0x0000001e, + regk_clkgen_nand_3_2 = 0x00000000, + regk_clkgen_nand_3_2_0x30 = 0x00000002, + regk_clkgen_nand_3_2_0x30_pll = 0x00000012, + regk_clkgen_nand_3_2_pll = 0x00000010, + regk_clkgen_nand_3_3 = 0x00000001, + regk_clkgen_nand_3_3_0x30 = 0x00000003, + regk_clkgen_nand_3_3_0x30_pll = 0x00000013, + regk_clkgen_nand_3_3_pll = 0x00000011, + regk_clkgen_nand_4_2 = 0x00000004, + regk_clkgen_nand_4_2_0x30 = 0x00000006, + regk_clkgen_nand_4_2_0x30_pll = 0x00000016, + regk_clkgen_nand_4_2_pll = 0x00000014, + regk_clkgen_nand_4_3 = 0x00000005, + regk_clkgen_nand_4_3_0x30 = 0x00000007, + regk_clkgen_nand_4_3_0x30_pll = 0x00000017, + regk_clkgen_nand_4_3_pll = 0x00000015, + regk_clkgen_nand_5_2 = 0x00000008, + regk_clkgen_nand_5_2_0x30 = 0x0000000a, + regk_clkgen_nand_5_2_0x30_pll = 0x0000001a, + regk_clkgen_nand_5_2_pll = 0x00000018, + regk_clkgen_nand_5_3 = 0x00000009, + regk_clkgen_nand_5_3_0x30 = 0x0000000b, + regk_clkgen_nand_5_3_0x30_pll = 0x0000001b, + regk_clkgen_nand_5_3_pll = 0x00000019, + regk_clkgen_no = 0x00000000, + regk_clkgen_rw_clk_ctrl_default = 0x00000002, + regk_clkgen_ser = 0x0000000d, + regk_clkgen_ser_pll = 0x0000000f, + regk_clkgen_yes = 0x00000001 +}; +#endif /* __clkgen_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/ddr2_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/ddr2_defs.h new file mode 100644 index 000000000000..0f30e8bf946d --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/ddr2_defs.h @@ -0,0 +1,281 @@ +#ifndef __ddr2_defs_h +#define __ddr2_defs_h + +/* + * This file is autogenerated from + * file: ddr2.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile ddr2_defs.h ddr2.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope ddr2 */ + +/* Register rw_cfg, scope ddr2, type rw */ +typedef struct { + unsigned int col_width : 4; + unsigned int nr_banks : 1; + unsigned int bw : 1; + unsigned int nr_ref : 4; + unsigned int ref_interval : 11; + unsigned int odt_ctrl : 2; + unsigned int odt_mem : 1; + unsigned int imp_strength : 1; + unsigned int auto_imp_cal : 1; + unsigned int imp_cal_override : 1; + unsigned int dll_override : 1; + unsigned int dummy1 : 4; +} reg_ddr2_rw_cfg; +#define REG_RD_ADDR_ddr2_rw_cfg 0 +#define REG_WR_ADDR_ddr2_rw_cfg 0 + +/* Register rw_timing, scope ddr2, type rw */ +typedef struct { + unsigned int wr : 3; + unsigned int rcd : 3; + unsigned int rp : 3; + unsigned int ras : 4; + unsigned int rfc : 7; + unsigned int rc : 5; + unsigned int rtp : 2; + unsigned int rtw : 3; + unsigned int wtr : 2; +} reg_ddr2_rw_timing; +#define REG_RD_ADDR_ddr2_rw_timing 4 +#define REG_WR_ADDR_ddr2_rw_timing 4 + +/* Register rw_latency, scope ddr2, type rw */ +typedef struct { + unsigned int cas : 3; + unsigned int additive : 3; + unsigned int dummy1 : 26; +} reg_ddr2_rw_latency; +#define REG_RD_ADDR_ddr2_rw_latency 8 +#define REG_WR_ADDR_ddr2_rw_latency 8 + +/* Register rw_phy_cfg, scope ddr2, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int dummy1 : 31; +} reg_ddr2_rw_phy_cfg; +#define REG_RD_ADDR_ddr2_rw_phy_cfg 12 +#define REG_WR_ADDR_ddr2_rw_phy_cfg 12 + +/* Register rw_phy_ctrl, scope ddr2, type rw */ +typedef struct { + unsigned int rst : 1; + unsigned int cal_rst : 1; + unsigned int cal_start : 1; + unsigned int dummy1 : 29; +} reg_ddr2_rw_phy_ctrl; +#define REG_RD_ADDR_ddr2_rw_phy_ctrl 16 +#define REG_WR_ADDR_ddr2_rw_phy_ctrl 16 + +/* Register rw_ctrl, scope ddr2, type rw */ +typedef struct { + unsigned int mrs_data : 16; + unsigned int cmd : 8; + unsigned int dummy1 : 8; +} reg_ddr2_rw_ctrl; +#define REG_RD_ADDR_ddr2_rw_ctrl 20 +#define REG_WR_ADDR_ddr2_rw_ctrl 20 + +/* Register rw_pwr_down, scope ddr2, type rw */ +typedef struct { + unsigned int self_ref : 2; + unsigned int phy_en : 1; + unsigned int dummy1 : 29; +} reg_ddr2_rw_pwr_down; +#define REG_RD_ADDR_ddr2_rw_pwr_down 24 +#define REG_WR_ADDR_ddr2_rw_pwr_down 24 + +/* Register r_stat, scope ddr2, type r */ +typedef struct { + unsigned int dll_lock : 1; + unsigned int dll_delay_code : 7; + unsigned int imp_cal_done : 1; + unsigned int imp_cal_fault : 1; + unsigned int cal_imp_pu : 4; + unsigned int cal_imp_pd : 4; + unsigned int dummy1 : 14; +} reg_ddr2_r_stat; +#define REG_RD_ADDR_ddr2_r_stat 28 + +/* Register rw_imp_ctrl, scope ddr2, type rw */ +typedef struct { + unsigned int imp_pu : 4; + unsigned int imp_pd : 4; + unsigned int dummy1 : 24; +} reg_ddr2_rw_imp_ctrl; +#define REG_RD_ADDR_ddr2_rw_imp_ctrl 32 +#define REG_WR_ADDR_ddr2_rw_imp_ctrl 32 + +#define STRIDE_ddr2_rw_dll_ctrl 4 +/* Register rw_dll_ctrl, scope ddr2, type rw */ +typedef struct { + unsigned int mode : 1; + unsigned int clk_delay : 7; + unsigned int dummy1 : 24; +} reg_ddr2_rw_dll_ctrl; +#define REG_RD_ADDR_ddr2_rw_dll_ctrl 36 +#define REG_WR_ADDR_ddr2_rw_dll_ctrl 36 + +#define STRIDE_ddr2_rw_dqs_dll_ctrl 4 +/* Register rw_dqs_dll_ctrl, scope ddr2, type rw */ +typedef struct { + unsigned int dqs90_delay : 7; + unsigned int dqs180_delay : 7; + unsigned int dqs270_delay : 7; + unsigned int dqs360_delay : 7; + unsigned int dummy1 : 4; +} reg_ddr2_rw_dqs_dll_ctrl; +#define REG_RD_ADDR_ddr2_rw_dqs_dll_ctrl 52 +#define REG_WR_ADDR_ddr2_rw_dqs_dll_ctrl 52 + + +/* Constants */ +enum { + regk_ddr2_al0 = 0x00000000, + regk_ddr2_al1 = 0x00000008, + regk_ddr2_al2 = 0x00000010, + regk_ddr2_al3 = 0x00000018, + regk_ddr2_al4 = 0x00000020, + regk_ddr2_auto = 0x00000003, + regk_ddr2_bank4 = 0x00000000, + regk_ddr2_bank8 = 0x00000001, + regk_ddr2_bl4 = 0x00000002, + regk_ddr2_bl8 = 0x00000003, + regk_ddr2_bt_il = 0x00000008, + regk_ddr2_bt_seq = 0x00000000, + regk_ddr2_bw16 = 0x00000001, + regk_ddr2_bw32 = 0x00000000, + regk_ddr2_cas2 = 0x00000020, + regk_ddr2_cas3 = 0x00000030, + regk_ddr2_cas4 = 0x00000040, + regk_ddr2_cas5 = 0x00000050, + regk_ddr2_deselect = 0x000000c0, + regk_ddr2_dic_weak = 0x00000002, + regk_ddr2_direct = 0x00000001, + regk_ddr2_dis = 0x00000000, + regk_ddr2_dll_dis = 0x00000001, + regk_ddr2_dll_en = 0x00000000, + regk_ddr2_dll_rst = 0x00000100, + regk_ddr2_emrs = 0x00000081, + regk_ddr2_emrs2 = 0x00000082, + regk_ddr2_emrs3 = 0x00000083, + regk_ddr2_full = 0x00000001, + regk_ddr2_hi_ref_rate = 0x00000080, + regk_ddr2_mrs = 0x00000080, + regk_ddr2_no = 0x00000000, + regk_ddr2_nop = 0x000000b8, + regk_ddr2_ocd_adj = 0x00000200, + regk_ddr2_ocd_default = 0x00000380, + regk_ddr2_ocd_drive0 = 0x00000100, + regk_ddr2_ocd_drive1 = 0x00000080, + regk_ddr2_ocd_exit = 0x00000000, + regk_ddr2_odt_dis = 0x00000000, + regk_ddr2_offs = 0x00000000, + regk_ddr2_pre = 0x00000090, + regk_ddr2_pre_all = 0x00000400, + regk_ddr2_pwr_down_fast = 0x00000000, + regk_ddr2_pwr_down_slow = 0x00001000, + regk_ddr2_ref = 0x00000088, + regk_ddr2_rtt150 = 0x00000040, + regk_ddr2_rtt50 = 0x00000044, + regk_ddr2_rtt75 = 0x00000004, + regk_ddr2_rw_cfg_default = 0x00186000, + regk_ddr2_rw_dll_ctrl_default = 0x00000000, + regk_ddr2_rw_dll_ctrl_size = 0x00000004, + regk_ddr2_rw_dqs_dll_ctrl_default = 0x00000000, + regk_ddr2_rw_dqs_dll_ctrl_size = 0x00000004, + regk_ddr2_rw_latency_default = 0x00000000, + regk_ddr2_rw_phy_cfg_default = 0x00000000, + regk_ddr2_rw_pwr_down_default = 0x00000000, + regk_ddr2_rw_timing_default = 0x00000000, + regk_ddr2_s1Gb = 0x0000001a, + regk_ddr2_s256Mb = 0x0000000f, + regk_ddr2_s2Gb = 0x00000027, + regk_ddr2_s4Gb = 0x00000042, + regk_ddr2_s512Mb = 0x00000015, + regk_ddr2_temp0_85 = 0x00000618, + regk_ddr2_temp85_95 = 0x0000030c, + regk_ddr2_term150 = 0x00000002, + regk_ddr2_term50 = 0x00000003, + regk_ddr2_term75 = 0x00000001, + regk_ddr2_test = 0x00000080, + regk_ddr2_weak = 0x00000000, + regk_ddr2_wr2 = 0x00000200, + regk_ddr2_wr3 = 0x00000400, + regk_ddr2_yes = 0x00000001 +}; +#endif /* __ddr2_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/gio_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/gio_defs.h new file mode 100644 index 000000000000..5d88e0db23ae --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/gio_defs.h @@ -0,0 +1,837 @@ +#ifndef __gio_defs_h +#define __gio_defs_h + +/* + * This file is autogenerated from + * file: gio.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile gio_defs.h gio.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope gio */ + +/* Register r_pa_din, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pa_din; +#define REG_RD_ADDR_gio_r_pa_din 0 + +/* Register rw_pa_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 32; +} reg_gio_rw_pa_dout; +#define REG_RD_ADDR_gio_rw_pa_dout 4 +#define REG_WR_ADDR_gio_rw_pa_dout 4 + +/* Register rw_pa_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 32; +} reg_gio_rw_pa_oe; +#define REG_RD_ADDR_gio_rw_pa_oe 8 +#define REG_WR_ADDR_gio_rw_pa_oe 8 + +/* Register rw_pa_byte0_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte0_dout; +#define REG_RD_ADDR_gio_rw_pa_byte0_dout 12 +#define REG_WR_ADDR_gio_rw_pa_byte0_dout 12 + +/* Register rw_pa_byte0_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte0_oe; +#define REG_RD_ADDR_gio_rw_pa_byte0_oe 16 +#define REG_WR_ADDR_gio_rw_pa_byte0_oe 16 + +/* Register rw_pa_byte1_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte1_dout; +#define REG_RD_ADDR_gio_rw_pa_byte1_dout 20 +#define REG_WR_ADDR_gio_rw_pa_byte1_dout 20 + +/* Register rw_pa_byte1_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte1_oe; +#define REG_RD_ADDR_gio_rw_pa_byte1_oe 24 +#define REG_WR_ADDR_gio_rw_pa_byte1_oe 24 + +/* Register rw_pa_byte2_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte2_dout; +#define REG_RD_ADDR_gio_rw_pa_byte2_dout 28 +#define REG_WR_ADDR_gio_rw_pa_byte2_dout 28 + +/* Register rw_pa_byte2_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte2_oe; +#define REG_RD_ADDR_gio_rw_pa_byte2_oe 32 +#define REG_WR_ADDR_gio_rw_pa_byte2_oe 32 + +/* Register rw_pa_byte3_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte3_dout; +#define REG_RD_ADDR_gio_rw_pa_byte3_dout 36 +#define REG_WR_ADDR_gio_rw_pa_byte3_dout 36 + +/* Register rw_pa_byte3_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_byte3_oe; +#define REG_RD_ADDR_gio_rw_pa_byte3_oe 40 +#define REG_WR_ADDR_gio_rw_pa_byte3_oe 40 + +/* Register r_pb_din, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pb_din; +#define REG_RD_ADDR_gio_r_pb_din 44 + +/* Register rw_pb_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 32; +} reg_gio_rw_pb_dout; +#define REG_RD_ADDR_gio_rw_pb_dout 48 +#define REG_WR_ADDR_gio_rw_pb_dout 48 + +/* Register rw_pb_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 32; +} reg_gio_rw_pb_oe; +#define REG_RD_ADDR_gio_rw_pb_oe 52 +#define REG_WR_ADDR_gio_rw_pb_oe 52 + +/* Register rw_pb_byte0_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte0_dout; +#define REG_RD_ADDR_gio_rw_pb_byte0_dout 56 +#define REG_WR_ADDR_gio_rw_pb_byte0_dout 56 + +/* Register rw_pb_byte0_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte0_oe; +#define REG_RD_ADDR_gio_rw_pb_byte0_oe 60 +#define REG_WR_ADDR_gio_rw_pb_byte0_oe 60 + +/* Register rw_pb_byte1_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte1_dout; +#define REG_RD_ADDR_gio_rw_pb_byte1_dout 64 +#define REG_WR_ADDR_gio_rw_pb_byte1_dout 64 + +/* Register rw_pb_byte1_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte1_oe; +#define REG_RD_ADDR_gio_rw_pb_byte1_oe 68 +#define REG_WR_ADDR_gio_rw_pb_byte1_oe 68 + +/* Register rw_pb_byte2_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte2_dout; +#define REG_RD_ADDR_gio_rw_pb_byte2_dout 72 +#define REG_WR_ADDR_gio_rw_pb_byte2_dout 72 + +/* Register rw_pb_byte2_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte2_oe; +#define REG_RD_ADDR_gio_rw_pb_byte2_oe 76 +#define REG_WR_ADDR_gio_rw_pb_byte2_oe 76 + +/* Register rw_pb_byte3_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte3_dout; +#define REG_RD_ADDR_gio_rw_pb_byte3_dout 80 +#define REG_WR_ADDR_gio_rw_pb_byte3_dout 80 + +/* Register rw_pb_byte3_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pb_byte3_oe; +#define REG_RD_ADDR_gio_rw_pb_byte3_oe 84 +#define REG_WR_ADDR_gio_rw_pb_byte3_oe 84 + +/* Register r_pc_din, scope gio, type r */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 16; +} reg_gio_r_pc_din; +#define REG_RD_ADDR_gio_r_pc_din 88 + +/* Register rw_pc_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 16; + unsigned int dummy1 : 16; +} reg_gio_rw_pc_dout; +#define REG_RD_ADDR_gio_rw_pc_dout 92 +#define REG_WR_ADDR_gio_rw_pc_dout 92 + +/* Register rw_pc_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 16; + unsigned int dummy1 : 16; +} reg_gio_rw_pc_oe; +#define REG_RD_ADDR_gio_rw_pc_oe 96 +#define REG_WR_ADDR_gio_rw_pc_oe 96 + +/* Register rw_pc_byte0_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pc_byte0_dout; +#define REG_RD_ADDR_gio_rw_pc_byte0_dout 100 +#define REG_WR_ADDR_gio_rw_pc_byte0_dout 100 + +/* Register rw_pc_byte0_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pc_byte0_oe; +#define REG_RD_ADDR_gio_rw_pc_byte0_oe 104 +#define REG_WR_ADDR_gio_rw_pc_byte0_oe 104 + +/* Register rw_pc_byte1_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pc_byte1_dout; +#define REG_RD_ADDR_gio_rw_pc_byte1_dout 108 +#define REG_WR_ADDR_gio_rw_pc_byte1_dout 108 + +/* Register rw_pc_byte1_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pc_byte1_oe; +#define REG_RD_ADDR_gio_rw_pc_byte1_oe 112 +#define REG_WR_ADDR_gio_rw_pc_byte1_oe 112 + +/* Register r_pd_din, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pd_din; +#define REG_RD_ADDR_gio_r_pd_din 116 + +/* Register rw_intr_cfg, scope gio, type rw */ +typedef struct { + unsigned int intr0 : 3; + unsigned int intr1 : 3; + unsigned int intr2 : 3; + unsigned int intr3 : 3; + unsigned int intr4 : 3; + unsigned int intr5 : 3; + unsigned int intr6 : 3; + unsigned int intr7 : 3; + unsigned int dummy1 : 8; +} reg_gio_rw_intr_cfg; +#define REG_RD_ADDR_gio_rw_intr_cfg 120 +#define REG_WR_ADDR_gio_rw_intr_cfg 120 + +/* Register rw_intr_pins, scope gio, type rw */ +typedef struct { + unsigned int intr0 : 4; + unsigned int intr1 : 4; + unsigned int intr2 : 4; + unsigned int intr3 : 4; + unsigned int intr4 : 4; + unsigned int intr5 : 4; + unsigned int intr6 : 4; + unsigned int intr7 : 4; +} reg_gio_rw_intr_pins; +#define REG_RD_ADDR_gio_rw_intr_pins 124 +#define REG_WR_ADDR_gio_rw_intr_pins 124 + +/* Register rw_intr_mask, scope gio, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int i2c0_done : 1; + unsigned int i2c1_done : 1; + unsigned int dummy1 : 22; +} reg_gio_rw_intr_mask; +#define REG_RD_ADDR_gio_rw_intr_mask 128 +#define REG_WR_ADDR_gio_rw_intr_mask 128 + +/* Register rw_ack_intr, scope gio, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int i2c0_done : 1; + unsigned int i2c1_done : 1; + unsigned int dummy1 : 22; +} reg_gio_rw_ack_intr; +#define REG_RD_ADDR_gio_rw_ack_intr 132 +#define REG_WR_ADDR_gio_rw_ack_intr 132 + +/* Register r_intr, scope gio, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int i2c0_done : 1; + unsigned int i2c1_done : 1; + unsigned int dummy1 : 22; +} reg_gio_r_intr; +#define REG_RD_ADDR_gio_r_intr 136 + +/* Register r_masked_intr, scope gio, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int i2c0_done : 1; + unsigned int i2c1_done : 1; + unsigned int dummy1 : 22; +} reg_gio_r_masked_intr; +#define REG_RD_ADDR_gio_r_masked_intr 140 + +/* Register rw_i2c0_start, scope gio, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_gio_rw_i2c0_start; +#define REG_RD_ADDR_gio_rw_i2c0_start 144 +#define REG_WR_ADDR_gio_rw_i2c0_start 144 + +/* Register rw_i2c0_cfg, scope gio, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int bit_order : 1; + unsigned int scl_io : 1; + unsigned int scl_inv : 1; + unsigned int sda_io : 1; + unsigned int sda_idle : 1; + unsigned int dummy1 : 26; +} reg_gio_rw_i2c0_cfg; +#define REG_RD_ADDR_gio_rw_i2c0_cfg 148 +#define REG_WR_ADDR_gio_rw_i2c0_cfg 148 + +/* Register rw_i2c0_ctrl, scope gio, type rw */ +typedef struct { + unsigned int trf_bits : 6; + unsigned int switch_dir : 6; + unsigned int extra_start : 3; + unsigned int early_end : 1; + unsigned int start_stop : 1; + unsigned int ack_dir0 : 1; + unsigned int ack_dir1 : 1; + unsigned int ack_dir2 : 1; + unsigned int ack_dir3 : 1; + unsigned int ack_dir4 : 1; + unsigned int ack_dir5 : 1; + unsigned int ack_bit : 1; + unsigned int start_bit : 1; + unsigned int freq : 2; + unsigned int dummy1 : 5; +} reg_gio_rw_i2c0_ctrl; +#define REG_RD_ADDR_gio_rw_i2c0_ctrl 152 +#define REG_WR_ADDR_gio_rw_i2c0_ctrl 152 + +/* Register rw_i2c0_data, scope gio, type rw */ +typedef struct { + unsigned int data0 : 8; + unsigned int data1 : 8; + unsigned int data2 : 8; + unsigned int data3 : 8; +} reg_gio_rw_i2c0_data; +#define REG_RD_ADDR_gio_rw_i2c0_data 156 +#define REG_WR_ADDR_gio_rw_i2c0_data 156 + +/* Register rw_i2c0_data2, scope gio, type rw */ +typedef struct { + unsigned int data4 : 8; + unsigned int data5 : 8; + unsigned int start_val : 6; + unsigned int ack_val : 6; + unsigned int dummy1 : 4; +} reg_gio_rw_i2c0_data2; +#define REG_RD_ADDR_gio_rw_i2c0_data2 160 +#define REG_WR_ADDR_gio_rw_i2c0_data2 160 + +/* Register rw_i2c1_start, scope gio, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_gio_rw_i2c1_start; +#define REG_RD_ADDR_gio_rw_i2c1_start 164 +#define REG_WR_ADDR_gio_rw_i2c1_start 164 + +/* Register rw_i2c1_cfg, scope gio, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int bit_order : 1; + unsigned int scl_io : 1; + unsigned int scl_inv : 1; + unsigned int sda0_io : 1; + unsigned int sda0_idle : 1; + unsigned int sda1_io : 1; + unsigned int sda1_idle : 1; + unsigned int sda2_io : 1; + unsigned int sda2_idle : 1; + unsigned int sda3_io : 1; + unsigned int sda3_idle : 1; + unsigned int sda_sel : 2; + unsigned int sen_idle : 1; + unsigned int sen_inv : 1; + unsigned int sen_sel : 2; + unsigned int dummy1 : 14; +} reg_gio_rw_i2c1_cfg; +#define REG_RD_ADDR_gio_rw_i2c1_cfg 168 +#define REG_WR_ADDR_gio_rw_i2c1_cfg 168 + +/* Register rw_i2c1_ctrl, scope gio, type rw */ +typedef struct { + unsigned int trf_bits : 6; + unsigned int switch_dir : 6; + unsigned int extra_start : 3; + unsigned int early_end : 1; + unsigned int start_stop : 1; + unsigned int ack_dir0 : 1; + unsigned int ack_dir1 : 1; + unsigned int ack_dir2 : 1; + unsigned int ack_dir3 : 1; + unsigned int ack_dir4 : 1; + unsigned int ack_dir5 : 1; + unsigned int ack_bit : 1; + unsigned int start_bit : 1; + unsigned int freq : 2; + unsigned int dummy1 : 5; +} reg_gio_rw_i2c1_ctrl; +#define REG_RD_ADDR_gio_rw_i2c1_ctrl 172 +#define REG_WR_ADDR_gio_rw_i2c1_ctrl 172 + +/* Register rw_i2c1_data, scope gio, type rw */ +typedef struct { + unsigned int data0 : 8; + unsigned int data1 : 8; + unsigned int data2 : 8; + unsigned int data3 : 8; +} reg_gio_rw_i2c1_data; +#define REG_RD_ADDR_gio_rw_i2c1_data 176 +#define REG_WR_ADDR_gio_rw_i2c1_data 176 + +/* Register rw_i2c1_data2, scope gio, type rw */ +typedef struct { + unsigned int data4 : 8; + unsigned int data5 : 8; + unsigned int start_val : 6; + unsigned int ack_val : 6; + unsigned int dummy1 : 4; +} reg_gio_rw_i2c1_data2; +#define REG_RD_ADDR_gio_rw_i2c1_data2 180 +#define REG_WR_ADDR_gio_rw_i2c1_data2 180 + +/* Register r_ppwm_stat, scope gio, type r */ +typedef struct { + unsigned int freq : 2; + unsigned int dummy1 : 30; +} reg_gio_r_ppwm_stat; +#define REG_RD_ADDR_gio_r_ppwm_stat 184 + +/* Register rw_ppwm_data, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_ppwm_data; +#define REG_RD_ADDR_gio_rw_ppwm_data 188 +#define REG_WR_ADDR_gio_rw_ppwm_data 188 + +/* Register rw_pwm0_ctrl, scope gio, type rw */ +typedef struct { + unsigned int mode : 2; + unsigned int ccd_override : 1; + unsigned int ccd_val : 1; + unsigned int dummy1 : 28; +} reg_gio_rw_pwm0_ctrl; +#define REG_RD_ADDR_gio_rw_pwm0_ctrl 192 +#define REG_WR_ADDR_gio_rw_pwm0_ctrl 192 + +/* Register rw_pwm0_var, scope gio, type rw */ +typedef struct { + unsigned int lo : 13; + unsigned int hi : 13; + unsigned int dummy1 : 6; +} reg_gio_rw_pwm0_var; +#define REG_RD_ADDR_gio_rw_pwm0_var 196 +#define REG_WR_ADDR_gio_rw_pwm0_var 196 + +/* Register rw_pwm0_data, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pwm0_data; +#define REG_RD_ADDR_gio_rw_pwm0_data 200 +#define REG_WR_ADDR_gio_rw_pwm0_data 200 + +/* Register rw_pwm1_ctrl, scope gio, type rw */ +typedef struct { + unsigned int mode : 2; + unsigned int ccd_override : 1; + unsigned int ccd_val : 1; + unsigned int dummy1 : 28; +} reg_gio_rw_pwm1_ctrl; +#define REG_RD_ADDR_gio_rw_pwm1_ctrl 204 +#define REG_WR_ADDR_gio_rw_pwm1_ctrl 204 + +/* Register rw_pwm1_var, scope gio, type rw */ +typedef struct { + unsigned int lo : 13; + unsigned int hi : 13; + unsigned int dummy1 : 6; +} reg_gio_rw_pwm1_var; +#define REG_RD_ADDR_gio_rw_pwm1_var 208 +#define REG_WR_ADDR_gio_rw_pwm1_var 208 + +/* Register rw_pwm1_data, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pwm1_data; +#define REG_RD_ADDR_gio_rw_pwm1_data 212 +#define REG_WR_ADDR_gio_rw_pwm1_data 212 + +/* Register rw_pwm2_ctrl, scope gio, type rw */ +typedef struct { + unsigned int mode : 2; + unsigned int ccd_override : 1; + unsigned int ccd_val : 1; + unsigned int dummy1 : 28; +} reg_gio_rw_pwm2_ctrl; +#define REG_RD_ADDR_gio_rw_pwm2_ctrl 216 +#define REG_WR_ADDR_gio_rw_pwm2_ctrl 216 + +/* Register rw_pwm2_var, scope gio, type rw */ +typedef struct { + unsigned int lo : 13; + unsigned int hi : 13; + unsigned int dummy1 : 6; +} reg_gio_rw_pwm2_var; +#define REG_RD_ADDR_gio_rw_pwm2_var 220 +#define REG_WR_ADDR_gio_rw_pwm2_var 220 + +/* Register rw_pwm2_data, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pwm2_data; +#define REG_RD_ADDR_gio_rw_pwm2_data 224 +#define REG_WR_ADDR_gio_rw_pwm2_data 224 + +/* Register rw_pwm_in_cfg, scope gio, type rw */ +typedef struct { + unsigned int pin : 3; + unsigned int dummy1 : 29; +} reg_gio_rw_pwm_in_cfg; +#define REG_RD_ADDR_gio_rw_pwm_in_cfg 228 +#define REG_WR_ADDR_gio_rw_pwm_in_cfg 228 + +/* Register r_pwm_in_lo, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pwm_in_lo; +#define REG_RD_ADDR_gio_r_pwm_in_lo 232 + +/* Register r_pwm_in_hi, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pwm_in_hi; +#define REG_RD_ADDR_gio_r_pwm_in_hi 236 + +/* Register r_pwm_in_cnt, scope gio, type r */ +typedef struct { + unsigned int data : 32; +} reg_gio_r_pwm_in_cnt; +#define REG_RD_ADDR_gio_r_pwm_in_cnt 240 + + +/* Constants */ +enum { + regk_gio_anyedge = 0x00000007, + regk_gio_f100k = 0x00000000, + regk_gio_f1562 = 0x00000000, + regk_gio_f195 = 0x00000003, + regk_gio_f1m = 0x00000002, + regk_gio_f390 = 0x00000002, + regk_gio_f400k = 0x00000001, + regk_gio_f5m = 0x00000003, + regk_gio_f781 = 0x00000001, + regk_gio_hi = 0x00000001, + regk_gio_in = 0x00000000, + regk_gio_intr_pa0 = 0x00000000, + regk_gio_intr_pa1 = 0x00000000, + regk_gio_intr_pa10 = 0x00000001, + regk_gio_intr_pa11 = 0x00000001, + regk_gio_intr_pa12 = 0x00000001, + regk_gio_intr_pa13 = 0x00000001, + regk_gio_intr_pa14 = 0x00000001, + regk_gio_intr_pa15 = 0x00000001, + regk_gio_intr_pa16 = 0x00000002, + regk_gio_intr_pa17 = 0x00000002, + regk_gio_intr_pa18 = 0x00000002, + regk_gio_intr_pa19 = 0x00000002, + regk_gio_intr_pa2 = 0x00000000, + regk_gio_intr_pa20 = 0x00000002, + regk_gio_intr_pa21 = 0x00000002, + regk_gio_intr_pa22 = 0x00000002, + regk_gio_intr_pa23 = 0x00000002, + regk_gio_intr_pa24 = 0x00000003, + regk_gio_intr_pa25 = 0x00000003, + regk_gio_intr_pa26 = 0x00000003, + regk_gio_intr_pa27 = 0x00000003, + regk_gio_intr_pa28 = 0x00000003, + regk_gio_intr_pa29 = 0x00000003, + regk_gio_intr_pa3 = 0x00000000, + regk_gio_intr_pa30 = 0x00000003, + regk_gio_intr_pa31 = 0x00000003, + regk_gio_intr_pa4 = 0x00000000, + regk_gio_intr_pa5 = 0x00000000, + regk_gio_intr_pa6 = 0x00000000, + regk_gio_intr_pa7 = 0x00000000, + regk_gio_intr_pa8 = 0x00000001, + regk_gio_intr_pa9 = 0x00000001, + regk_gio_intr_pb0 = 0x00000004, + regk_gio_intr_pb1 = 0x00000004, + regk_gio_intr_pb10 = 0x00000005, + regk_gio_intr_pb11 = 0x00000005, + regk_gio_intr_pb12 = 0x00000005, + regk_gio_intr_pb13 = 0x00000005, + regk_gio_intr_pb14 = 0x00000005, + regk_gio_intr_pb15 = 0x00000005, + regk_gio_intr_pb16 = 0x00000006, + regk_gio_intr_pb17 = 0x00000006, + regk_gio_intr_pb18 = 0x00000006, + regk_gio_intr_pb19 = 0x00000006, + regk_gio_intr_pb2 = 0x00000004, + regk_gio_intr_pb20 = 0x00000006, + regk_gio_intr_pb21 = 0x00000006, + regk_gio_intr_pb22 = 0x00000006, + regk_gio_intr_pb23 = 0x00000006, + regk_gio_intr_pb24 = 0x00000007, + regk_gio_intr_pb25 = 0x00000007, + regk_gio_intr_pb26 = 0x00000007, + regk_gio_intr_pb27 = 0x00000007, + regk_gio_intr_pb28 = 0x00000007, + regk_gio_intr_pb29 = 0x00000007, + regk_gio_intr_pb3 = 0x00000004, + regk_gio_intr_pb30 = 0x00000007, + regk_gio_intr_pb31 = 0x00000007, + regk_gio_intr_pb4 = 0x00000004, + regk_gio_intr_pb5 = 0x00000004, + regk_gio_intr_pb6 = 0x00000004, + regk_gio_intr_pb7 = 0x00000004, + regk_gio_intr_pb8 = 0x00000005, + regk_gio_intr_pb9 = 0x00000005, + regk_gio_intr_pc0 = 0x00000008, + regk_gio_intr_pc1 = 0x00000008, + regk_gio_intr_pc10 = 0x00000009, + regk_gio_intr_pc11 = 0x00000009, + regk_gio_intr_pc12 = 0x00000009, + regk_gio_intr_pc13 = 0x00000009, + regk_gio_intr_pc14 = 0x00000009, + regk_gio_intr_pc15 = 0x00000009, + regk_gio_intr_pc2 = 0x00000008, + regk_gio_intr_pc3 = 0x00000008, + regk_gio_intr_pc4 = 0x00000008, + regk_gio_intr_pc5 = 0x00000008, + regk_gio_intr_pc6 = 0x00000008, + regk_gio_intr_pc7 = 0x00000008, + regk_gio_intr_pc8 = 0x00000009, + regk_gio_intr_pc9 = 0x00000009, + regk_gio_intr_pd0 = 0x0000000c, + regk_gio_intr_pd1 = 0x0000000c, + regk_gio_intr_pd10 = 0x0000000d, + regk_gio_intr_pd11 = 0x0000000d, + regk_gio_intr_pd12 = 0x0000000d, + regk_gio_intr_pd13 = 0x0000000d, + regk_gio_intr_pd14 = 0x0000000d, + regk_gio_intr_pd15 = 0x0000000d, + regk_gio_intr_pd16 = 0x0000000e, + regk_gio_intr_pd17 = 0x0000000e, + regk_gio_intr_pd18 = 0x0000000e, + regk_gio_intr_pd19 = 0x0000000e, + regk_gio_intr_pd2 = 0x0000000c, + regk_gio_intr_pd20 = 0x0000000e, + regk_gio_intr_pd21 = 0x0000000e, + regk_gio_intr_pd22 = 0x0000000e, + regk_gio_intr_pd23 = 0x0000000e, + regk_gio_intr_pd24 = 0x0000000f, + regk_gio_intr_pd25 = 0x0000000f, + regk_gio_intr_pd26 = 0x0000000f, + regk_gio_intr_pd27 = 0x0000000f, + regk_gio_intr_pd28 = 0x0000000f, + regk_gio_intr_pd29 = 0x0000000f, + regk_gio_intr_pd3 = 0x0000000c, + regk_gio_intr_pd30 = 0x0000000f, + regk_gio_intr_pd31 = 0x0000000f, + regk_gio_intr_pd4 = 0x0000000c, + regk_gio_intr_pd5 = 0x0000000c, + regk_gio_intr_pd6 = 0x0000000c, + regk_gio_intr_pd7 = 0x0000000c, + regk_gio_intr_pd8 = 0x0000000d, + regk_gio_intr_pd9 = 0x0000000d, + regk_gio_lo = 0x00000002, + regk_gio_lsb = 0x00000000, + regk_gio_msb = 0x00000001, + regk_gio_negedge = 0x00000006, + regk_gio_no = 0x00000000, + regk_gio_no_switch = 0x0000003f, + regk_gio_none = 0x00000007, + regk_gio_off = 0x00000000, + regk_gio_opendrain = 0x00000000, + regk_gio_out = 0x00000001, + regk_gio_posedge = 0x00000005, + regk_gio_pwm_hfp = 0x00000002, + regk_gio_pwm_pa0 = 0x00000001, + regk_gio_pwm_pa19 = 0x00000004, + regk_gio_pwm_pa6 = 0x00000002, + regk_gio_pwm_pa7 = 0x00000003, + regk_gio_pwm_pb26 = 0x00000005, + regk_gio_pwm_pd23 = 0x00000006, + regk_gio_pwm_pd31 = 0x00000007, + regk_gio_pwm_std = 0x00000001, + regk_gio_pwm_var = 0x00000003, + regk_gio_rw_i2c0_cfg_default = 0x00000020, + regk_gio_rw_i2c0_ctrl_default = 0x00010000, + regk_gio_rw_i2c0_start_default = 0x00000000, + regk_gio_rw_i2c1_cfg_default = 0x00000aa0, + regk_gio_rw_i2c1_ctrl_default = 0x00010000, + regk_gio_rw_i2c1_start_default = 0x00000000, + regk_gio_rw_intr_cfg_default = 0x00000000, + regk_gio_rw_intr_mask_default = 0x00000000, + regk_gio_rw_pa_oe_default = 0x00000000, + regk_gio_rw_pb_oe_default = 0x00000000, + regk_gio_rw_pc_oe_default = 0x00000000, + regk_gio_rw_ppwm_data_default = 0x00000000, + regk_gio_rw_pwm0_ctrl_default = 0x00000000, + regk_gio_rw_pwm1_ctrl_default = 0x00000000, + regk_gio_rw_pwm2_ctrl_default = 0x00000000, + regk_gio_rw_pwm_in_cfg_default = 0x00000000, + regk_gio_sda0 = 0x00000000, + regk_gio_sda1 = 0x00000001, + regk_gio_sda2 = 0x00000002, + regk_gio_sda3 = 0x00000003, + regk_gio_sen = 0x00000000, + regk_gio_set = 0x00000003, + regk_gio_yes = 0x00000001 +}; +#endif /* __gio_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/intr_vect.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/intr_vect.h new file mode 100644 index 000000000000..bea699aa480e --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/intr_vect.h @@ -0,0 +1,46 @@ +/* Interrupt vector numbers autogenerated by ../../../tools/rdesc/bin/rdes2intr + from intr_vect.r */ + +#ifndef _INTR_VECT_R +#define _INTR_VECT_R +#define TIMER0_INTR_VECT 0x31 +#define TIMER1_INTR_VECT 0x32 +#define DMA0_INTR_VECT 0x33 +#define DMA1_INTR_VECT 0x34 +#define DMA2_INTR_VECT 0x35 +#define DMA3_INTR_VECT 0x36 +#define DMA4_INTR_VECT 0x37 +#define DMA5_INTR_VECT 0x38 +#define DMA6_INTR_VECT 0x39 +#define DMA7_INTR_VECT 0x3a +#define DMA9_INTR_VECT 0x3b +#define DMA11_INTR_VECT 0x3c +#define GIO_INTR_VECT 0x3d +#define IOP0_INTR_VECT 0x3e +#define IOP1_INTR_VECT 0x3f +#define SER0_INTR_VECT 0x40 +#define SER1_INTR_VECT 0x41 +#define SER2_INTR_VECT 0x42 +#define SER3_INTR_VECT 0x43 +#define SER4_INTR_VECT 0x44 +#define SSER_INTR_VECT 0x45 +#define STRDMA0_INTR_VECT 0x46 +#define STRDMA1_INTR_VECT 0x47 +#define STRDMA2_INTR_VECT 0x48 +#define STRDMA3_INTR_VECT 0x49 +#define STRDMA5_INTR_VECT 0x4a +#define VIN_INTR_VECT 0x4b +#define VOUT_INTR_VECT 0x4c +#define JPEG_INTR_VECT 0x4d +#define H264_INTR_VECT 0x4e +#define HISTO_INTR_VECT 0x4f +#define CCD_INTR_VECT 0x50 +#define ETH_INTR_VECT 0x51 +#define MEMARB_BAR_INTR_VECT 0x52 +#define MEMARB_FOO_INTR_VECT 0x53 +#define PIO_INTR_VECT 0x54 +#define SCLR_INTR_VECT 0x55 +#define SCLR_FIFO_INTR_VECT 0x56 +#define IPI_INTR_VECT 0x57 +#define NBR_INTR_VECT 0x58 +#endif diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/intr_vect_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/intr_vect_defs.h new file mode 100644 index 000000000000..b820f6347c74 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/intr_vect_defs.h @@ -0,0 +1,341 @@ +#ifndef __intr_vect_defs_h +#define __intr_vect_defs_h + +/* + * This file is autogenerated from + * file: intr_vect.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile intr_vect_defs.h intr_vect.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope intr_vect */ + + +#define STRIDE_intr_vect_rw_mask 4 +/* Register rw_mask0, scope intr_vect, type rw */ +typedef struct { + unsigned int timer0 : 1; + unsigned int timer1 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int gio : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int ser4 : 1; + unsigned int sser : 1; + unsigned int strdma0 : 1; + unsigned int strdma1 : 1; + unsigned int strdma2 : 1; + unsigned int strdma3 : 1; + unsigned int strdma5 : 1; + unsigned int vin : 1; + unsigned int vout : 1; + unsigned int jpeg : 1; + unsigned int h264 : 1; + unsigned int histo : 1; + unsigned int ccd : 1; +} reg_intr_vect_rw_mask0; +#define reg_intr_vect_rw_mask reg_intr_vect_rw_mask0 +#define REG_RD_ADDR_intr_vect_rw_mask 0 +#define REG_WR_ADDR_intr_vect_rw_mask 0 +#define REG_RD_ADDR_intr_vect_rw_mask0 0 +#define REG_WR_ADDR_intr_vect_rw_mask0 0 + +#define STRIDE_intr_vect_r_vect 4 +/* Register r_vect0, scope intr_vect, type r */ +typedef struct { + unsigned int timer0 : 1; + unsigned int timer1 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int gio : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int ser4 : 1; + unsigned int sser : 1; + unsigned int strdma0 : 1; + unsigned int strdma1 : 1; + unsigned int strdma2 : 1; + unsigned int strdma3 : 1; + unsigned int strdma5 : 1; + unsigned int vin : 1; + unsigned int vout : 1; + unsigned int jpeg : 1; + unsigned int h264 : 1; + unsigned int histo : 1; + unsigned int ccd : 1; +} reg_intr_vect_r_vect0; +#define reg_intr_vect_r_vect reg_intr_vect_r_vect0 +#define REG_RD_ADDR_intr_vect_r_vect 8 +#define REG_RD_ADDR_intr_vect_r_vect0 8 + +#define STRIDE_intr_vect_r_masked_vect 4 +/* Register r_masked_vect0, scope intr_vect, type r */ +typedef struct { + unsigned int timer0 : 1; + unsigned int timer1 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int gio : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int ser4 : 1; + unsigned int sser : 1; + unsigned int strdma0 : 1; + unsigned int strdma1 : 1; + unsigned int strdma2 : 1; + unsigned int strdma3 : 1; + unsigned int strdma5 : 1; + unsigned int vin : 1; + unsigned int vout : 1; + unsigned int jpeg : 1; + unsigned int h264 : 1; + unsigned int histo : 1; + unsigned int ccd : 1; +} reg_intr_vect_r_masked_vect0; +#define reg_intr_vect_r_masked_vect reg_intr_masked_vect_r_vect0 +#define REG_RD_ADDR_intr_vect_r_masked_vect0 16 +#define REG_RD_ADDR_intr_vect_r_masked_vect 16 + +#define STRIDE_intr_vect_rw_xmask 4 +/* Register rw_xmask0, scope intr_vect, type rw */ +typedef struct { + unsigned int timer0 : 1; + unsigned int timer1 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int gio : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int ser4 : 1; + unsigned int sser : 1; + unsigned int strdma0 : 1; + unsigned int strdma1 : 1; + unsigned int strdma2 : 1; + unsigned int strdma3 : 1; + unsigned int strdma5 : 1; + unsigned int vin : 1; + unsigned int vout : 1; + unsigned int jpeg : 1; + unsigned int h264 : 1; + unsigned int histo : 1; + unsigned int ccd : 1; +} reg_intr_vect_rw_xmask0; +#define reg_intr_vect_rw_xmask reg_intr_vect_rw_xmask0 +#define REG_RD_ADDR_intr_vect_rw_xmask0 24 +#define REG_WR_ADDR_intr_vect_rw_xmask0 24 +#define REG_RD_ADDR_intr_vect_rw_xmask 24 +#define REG_WR_ADDR_intr_vect_rw_xmask 24 + +/* Register rw_mask1, scope intr_vect, type rw */ +typedef struct { + unsigned int eth : 1; + unsigned int memarb_bar : 1; + unsigned int memarb_foo : 1; + unsigned int pio : 1; + unsigned int sclr : 1; + unsigned int sclr_fifo : 1; + unsigned int dummy1 : 26; +} reg_intr_vect_rw_mask1; +#define REG_RD_ADDR_intr_vect_rw_mask1 4 +#define REG_WR_ADDR_intr_vect_rw_mask1 4 + +/* Register r_vect1, scope intr_vect, type r */ +typedef struct { + unsigned int eth : 1; + unsigned int memarb_bar : 1; + unsigned int memarb_foo : 1; + unsigned int pio : 1; + unsigned int sclr : 1; + unsigned int sclr_fifo : 1; + unsigned int dummy1 : 26; +} reg_intr_vect_r_vect1; +#define REG_RD_ADDR_intr_vect_r_vect1 12 + +/* Register r_masked_vect1, scope intr_vect, type r */ +typedef struct { + unsigned int eth : 1; + unsigned int memarb_bar : 1; + unsigned int memarb_foo : 1; + unsigned int pio : 1; + unsigned int sclr : 1; + unsigned int sclr_fifo : 1; + unsigned int dummy1 : 26; +} reg_intr_vect_r_masked_vect1; +#define REG_RD_ADDR_intr_vect_r_masked_vect1 20 + +/* Register rw_xmask1, scope intr_vect, type rw */ +typedef struct { + unsigned int eth : 1; + unsigned int memarb_bar : 1; + unsigned int memarb_foo : 1; + unsigned int pio : 1; + unsigned int sclr : 1; + unsigned int sclr_fifo : 1; + unsigned int dummy1 : 26; +} reg_intr_vect_rw_xmask1; +#define REG_RD_ADDR_intr_vect_rw_xmask1 28 +#define REG_WR_ADDR_intr_vect_rw_xmask1 28 + +/* Register rw_xmask_ctrl, scope intr_vect, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int dummy1 : 31; +} reg_intr_vect_rw_xmask_ctrl; +#define REG_RD_ADDR_intr_vect_rw_xmask_ctrl 32 +#define REG_WR_ADDR_intr_vect_rw_xmask_ctrl 32 + +/* Register r_nmi, scope intr_vect, type r */ +typedef struct { + unsigned int watchdog0 : 1; + unsigned int watchdog1 : 1; + unsigned int dummy1 : 30; +} reg_intr_vect_r_nmi; +#define REG_RD_ADDR_intr_vect_r_nmi 64 + +/* Register r_guru, scope intr_vect, type r */ +typedef struct { + unsigned int jtag : 1; + unsigned int dummy1 : 31; +} reg_intr_vect_r_guru; +#define REG_RD_ADDR_intr_vect_r_guru 68 + + +/* Register rw_ipi, scope intr_vect, type rw */ +typedef struct +{ + unsigned int vector; +} reg_intr_vect_rw_ipi; +#define REG_RD_ADDR_intr_vect_rw_ipi 72 +#define REG_WR_ADDR_intr_vect_rw_ipi 72 + +/* Constants */ +enum { + regk_intr_vect_no = 0x00000000, + regk_intr_vect_rw_mask0_default = 0x00000000, + regk_intr_vect_rw_mask1_default = 0x00000000, + regk_intr_vect_rw_xmask0_default = 0x00000000, + regk_intr_vect_rw_xmask1_default = 0x00000000, + regk_intr_vect_rw_xmask_ctrl_default = 0x00000000, + regk_intr_vect_yes = 0x00000001 +}; +#endif /* __intr_vect_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_reg_space_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_reg_space_asm.h new file mode 100644 index 000000000000..d75a74e90458 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_reg_space_asm.h @@ -0,0 +1,31 @@ +/* Autogenerated Changes here will be lost! + * generated by ./gen_sw.pl Wed Feb 14 09:27:48 2007 iop_sw.cfg + */ +#define iop_version 0 +#define iop_fifo_in_extra 64 +#define iop_fifo_out_extra 128 +#define iop_trigger_grp0 192 +#define iop_trigger_grp1 256 +#define iop_trigger_grp2 320 +#define iop_trigger_grp3 384 +#define iop_trigger_grp4 448 +#define iop_trigger_grp5 512 +#define iop_trigger_grp6 576 +#define iop_trigger_grp7 640 +#define iop_crc_par 768 +#define iop_dmc_in 896 +#define iop_dmc_out 1024 +#define iop_fifo_in 1152 +#define iop_fifo_out 1280 +#define iop_scrc_in 1408 +#define iop_scrc_out 1536 +#define iop_timer_grp0 1664 +#define iop_timer_grp1 1792 +#define iop_sap_in 2048 +#define iop_sap_out 2304 +#define iop_spu 2560 +#define iop_sw_cfg 2816 +#define iop_sw_cpu 3072 +#define iop_sw_mpu 3328 +#define iop_sw_spu 3584 +#define iop_mpu 4096 diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sap_in_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sap_in_defs_asm.h new file mode 100644 index 000000000000..7f90b5a0460d --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sap_in_defs_asm.h @@ -0,0 +1,109 @@ +#ifndef __iop_sap_in_defs_asm_h +#define __iop_sap_in_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sap_in.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sap_in_defs_asm.h iop_sap_in.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +#define STRIDE_iop_sap_in_rw_bus_byte 4 +/* Register rw_bus_byte, scope iop_sap_in, type rw */ +#define reg_iop_sap_in_rw_bus_byte___sync_sel___lsb 0 +#define reg_iop_sap_in_rw_bus_byte___sync_sel___width 2 +#define reg_iop_sap_in_rw_bus_byte___sync_ext_src___lsb 2 +#define reg_iop_sap_in_rw_bus_byte___sync_ext_src___width 3 +#define reg_iop_sap_in_rw_bus_byte___sync_edge___lsb 5 +#define reg_iop_sap_in_rw_bus_byte___sync_edge___width 2 +#define reg_iop_sap_in_rw_bus_byte___delay___lsb 7 +#define reg_iop_sap_in_rw_bus_byte___delay___width 2 +#define reg_iop_sap_in_rw_bus_byte_offset 0 + +#define STRIDE_iop_sap_in_rw_gio 4 +/* Register rw_gio, scope iop_sap_in, type rw */ +#define reg_iop_sap_in_rw_gio___sync_sel___lsb 0 +#define reg_iop_sap_in_rw_gio___sync_sel___width 2 +#define reg_iop_sap_in_rw_gio___sync_ext_src___lsb 2 +#define reg_iop_sap_in_rw_gio___sync_ext_src___width 3 +#define reg_iop_sap_in_rw_gio___sync_edge___lsb 5 +#define reg_iop_sap_in_rw_gio___sync_edge___width 2 +#define reg_iop_sap_in_rw_gio___delay___lsb 7 +#define reg_iop_sap_in_rw_gio___delay___width 2 +#define reg_iop_sap_in_rw_gio___logic___lsb 9 +#define reg_iop_sap_in_rw_gio___logic___width 2 +#define reg_iop_sap_in_rw_gio_offset 16 + + +/* Constants */ +#define regk_iop_sap_in_and 0x00000002 +#define regk_iop_sap_in_ext_clk200 0x00000003 +#define regk_iop_sap_in_gio0 0x00000000 +#define regk_iop_sap_in_gio12 0x00000003 +#define regk_iop_sap_in_gio16 0x00000004 +#define regk_iop_sap_in_gio20 0x00000005 +#define regk_iop_sap_in_gio24 0x00000006 +#define regk_iop_sap_in_gio28 0x00000007 +#define regk_iop_sap_in_gio4 0x00000001 +#define regk_iop_sap_in_gio8 0x00000002 +#define regk_iop_sap_in_inv 0x00000001 +#define regk_iop_sap_in_neg 0x00000002 +#define regk_iop_sap_in_no 0x00000000 +#define regk_iop_sap_in_no_del_ext_clk200 0x00000002 +#define regk_iop_sap_in_none 0x00000000 +#define regk_iop_sap_in_one 0x00000001 +#define regk_iop_sap_in_or 0x00000003 +#define regk_iop_sap_in_pos 0x00000001 +#define regk_iop_sap_in_pos_neg 0x00000003 +#define regk_iop_sap_in_rw_bus_byte_default 0x00000000 +#define regk_iop_sap_in_rw_bus_byte_size 0x00000004 +#define regk_iop_sap_in_rw_gio_default 0x00000000 +#define regk_iop_sap_in_rw_gio_size 0x00000020 +#define regk_iop_sap_in_timer_grp0_tmr3 0x00000000 +#define regk_iop_sap_in_timer_grp1_tmr3 0x00000001 +#define regk_iop_sap_in_tmr_clk200 0x00000001 +#define regk_iop_sap_in_two 0x00000002 +#define regk_iop_sap_in_two_clk200 0x00000000 +#endif /* __iop_sap_in_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sap_out_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sap_out_defs_asm.h new file mode 100644 index 000000000000..399bd656406b --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sap_out_defs_asm.h @@ -0,0 +1,276 @@ +#ifndef __iop_sap_out_defs_asm_h +#define __iop_sap_out_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sap_out.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sap_out_defs_asm.h iop_sap_out.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_gen_gated, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_gen_gated___clk0_src___lsb 0 +#define reg_iop_sap_out_rw_gen_gated___clk0_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk0_gate_src___lsb 2 +#define reg_iop_sap_out_rw_gen_gated___clk0_gate_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk0_force_src___lsb 4 +#define reg_iop_sap_out_rw_gen_gated___clk0_force_src___width 3 +#define reg_iop_sap_out_rw_gen_gated___clk1_src___lsb 7 +#define reg_iop_sap_out_rw_gen_gated___clk1_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk1_gate_src___lsb 9 +#define reg_iop_sap_out_rw_gen_gated___clk1_gate_src___width 2 +#define reg_iop_sap_out_rw_gen_gated___clk1_force_src___lsb 11 +#define reg_iop_sap_out_rw_gen_gated___clk1_force_src___width 3 +#define reg_iop_sap_out_rw_gen_gated_offset 0 + +/* Register rw_bus, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus___byte0_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus___byte0_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus___byte0_clk_ext___lsb 2 +#define reg_iop_sap_out_rw_bus___byte0_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus___byte0_gated_clk___lsb 4 +#define reg_iop_sap_out_rw_bus___byte0_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus___byte0_gated_clk___bit 4 +#define reg_iop_sap_out_rw_bus___byte0_clk_inv___lsb 5 +#define reg_iop_sap_out_rw_bus___byte0_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus___byte0_clk_inv___bit 5 +#define reg_iop_sap_out_rw_bus___byte0_delay___lsb 6 +#define reg_iop_sap_out_rw_bus___byte0_delay___width 1 +#define reg_iop_sap_out_rw_bus___byte0_delay___bit 6 +#define reg_iop_sap_out_rw_bus___byte1_clk_sel___lsb 7 +#define reg_iop_sap_out_rw_bus___byte1_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus___byte1_clk_ext___lsb 9 +#define reg_iop_sap_out_rw_bus___byte1_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus___byte1_gated_clk___lsb 11 +#define reg_iop_sap_out_rw_bus___byte1_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus___byte1_gated_clk___bit 11 +#define reg_iop_sap_out_rw_bus___byte1_clk_inv___lsb 12 +#define reg_iop_sap_out_rw_bus___byte1_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus___byte1_clk_inv___bit 12 +#define reg_iop_sap_out_rw_bus___byte1_delay___lsb 13 +#define reg_iop_sap_out_rw_bus___byte1_delay___width 1 +#define reg_iop_sap_out_rw_bus___byte1_delay___bit 13 +#define reg_iop_sap_out_rw_bus___byte2_clk_sel___lsb 14 +#define reg_iop_sap_out_rw_bus___byte2_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus___byte2_clk_ext___lsb 16 +#define reg_iop_sap_out_rw_bus___byte2_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus___byte2_gated_clk___lsb 18 +#define reg_iop_sap_out_rw_bus___byte2_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus___byte2_gated_clk___bit 18 +#define reg_iop_sap_out_rw_bus___byte2_clk_inv___lsb 19 +#define reg_iop_sap_out_rw_bus___byte2_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus___byte2_clk_inv___bit 19 +#define reg_iop_sap_out_rw_bus___byte2_delay___lsb 20 +#define reg_iop_sap_out_rw_bus___byte2_delay___width 1 +#define reg_iop_sap_out_rw_bus___byte2_delay___bit 20 +#define reg_iop_sap_out_rw_bus___byte3_clk_sel___lsb 21 +#define reg_iop_sap_out_rw_bus___byte3_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus___byte3_clk_ext___lsb 23 +#define reg_iop_sap_out_rw_bus___byte3_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus___byte3_gated_clk___lsb 25 +#define reg_iop_sap_out_rw_bus___byte3_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus___byte3_gated_clk___bit 25 +#define reg_iop_sap_out_rw_bus___byte3_clk_inv___lsb 26 +#define reg_iop_sap_out_rw_bus___byte3_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus___byte3_clk_inv___bit 26 +#define reg_iop_sap_out_rw_bus___byte3_delay___lsb 27 +#define reg_iop_sap_out_rw_bus___byte3_delay___width 1 +#define reg_iop_sap_out_rw_bus___byte3_delay___bit 27 +#define reg_iop_sap_out_rw_bus_offset 4 + +/* Register rw_bus_lo_oe, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_ext___lsb 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_gated_clk___lsb 4 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_gated_clk___bit 4 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_inv___lsb 5 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_inv___bit 5 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_delay___lsb 6 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_delay___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_delay___bit 6 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic___lsb 7 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic_src___lsb 9 +#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic_src___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_sel___lsb 11 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_ext___lsb 13 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_gated_clk___lsb 15 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_gated_clk___bit 15 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_inv___lsb 16 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_inv___bit 16 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_delay___lsb 17 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_delay___width 1 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_delay___bit 17 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic___lsb 18 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic_src___lsb 20 +#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic_src___width 2 +#define reg_iop_sap_out_rw_bus_lo_oe_offset 8 + +/* Register rw_bus_hi_oe, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_ext___lsb 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_gated_clk___lsb 4 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_gated_clk___bit 4 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_inv___lsb 5 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_inv___bit 5 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_delay___lsb 6 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_delay___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_delay___bit 6 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic___lsb 7 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic_src___lsb 9 +#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic_src___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_sel___lsb 11 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_sel___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_ext___lsb 13 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_ext___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_gated_clk___lsb 15 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_gated_clk___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_gated_clk___bit 15 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_inv___lsb 16 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_inv___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_inv___bit 16 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_delay___lsb 17 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_delay___width 1 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_delay___bit 17 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic___lsb 18 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic_src___lsb 20 +#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic_src___width 2 +#define reg_iop_sap_out_rw_bus_hi_oe_offset 12 + +#define STRIDE_iop_sap_out_rw_gio 4 +/* Register rw_gio, scope iop_sap_out, type rw */ +#define reg_iop_sap_out_rw_gio___out_clk_sel___lsb 0 +#define reg_iop_sap_out_rw_gio___out_clk_sel___width 3 +#define reg_iop_sap_out_rw_gio___out_clk_ext___lsb 3 +#define reg_iop_sap_out_rw_gio___out_clk_ext___width 2 +#define reg_iop_sap_out_rw_gio___out_gated_clk___lsb 5 +#define reg_iop_sap_out_rw_gio___out_gated_clk___width 1 +#define reg_iop_sap_out_rw_gio___out_gated_clk___bit 5 +#define reg_iop_sap_out_rw_gio___out_clk_inv___lsb 6 +#define reg_iop_sap_out_rw_gio___out_clk_inv___width 1 +#define reg_iop_sap_out_rw_gio___out_clk_inv___bit 6 +#define reg_iop_sap_out_rw_gio___out_delay___lsb 7 +#define reg_iop_sap_out_rw_gio___out_delay___width 1 +#define reg_iop_sap_out_rw_gio___out_delay___bit 7 +#define reg_iop_sap_out_rw_gio___out_logic___lsb 8 +#define reg_iop_sap_out_rw_gio___out_logic___width 2 +#define reg_iop_sap_out_rw_gio___out_logic_src___lsb 10 +#define reg_iop_sap_out_rw_gio___out_logic_src___width 2 +#define reg_iop_sap_out_rw_gio___oe_clk_sel___lsb 12 +#define reg_iop_sap_out_rw_gio___oe_clk_sel___width 3 +#define reg_iop_sap_out_rw_gio___oe_clk_ext___lsb 15 +#define reg_iop_sap_out_rw_gio___oe_clk_ext___width 2 +#define reg_iop_sap_out_rw_gio___oe_gated_clk___lsb 17 +#define reg_iop_sap_out_rw_gio___oe_gated_clk___width 1 +#define reg_iop_sap_out_rw_gio___oe_gated_clk___bit 17 +#define reg_iop_sap_out_rw_gio___oe_clk_inv___lsb 18 +#define reg_iop_sap_out_rw_gio___oe_clk_inv___width 1 +#define reg_iop_sap_out_rw_gio___oe_clk_inv___bit 18 +#define reg_iop_sap_out_rw_gio___oe_delay___lsb 19 +#define reg_iop_sap_out_rw_gio___oe_delay___width 1 +#define reg_iop_sap_out_rw_gio___oe_delay___bit 19 +#define reg_iop_sap_out_rw_gio___oe_logic___lsb 20 +#define reg_iop_sap_out_rw_gio___oe_logic___width 2 +#define reg_iop_sap_out_rw_gio___oe_logic_src___lsb 22 +#define reg_iop_sap_out_rw_gio___oe_logic_src___width 2 +#define reg_iop_sap_out_rw_gio_offset 16 + + +/* Constants */ +#define regk_iop_sap_out_always 0x00000001 +#define regk_iop_sap_out_and 0x00000002 +#define regk_iop_sap_out_clk0 0x00000000 +#define regk_iop_sap_out_clk1 0x00000001 +#define regk_iop_sap_out_clk12 0x00000004 +#define regk_iop_sap_out_clk200 0x00000000 +#define regk_iop_sap_out_ext 0x00000002 +#define regk_iop_sap_out_gated 0x00000003 +#define regk_iop_sap_out_gio0 0x00000000 +#define regk_iop_sap_out_gio1 0x00000000 +#define regk_iop_sap_out_gio16 0x00000002 +#define regk_iop_sap_out_gio17 0x00000002 +#define regk_iop_sap_out_gio24 0x00000003 +#define regk_iop_sap_out_gio25 0x00000003 +#define regk_iop_sap_out_gio8 0x00000001 +#define regk_iop_sap_out_gio9 0x00000001 +#define regk_iop_sap_out_gio_out10 0x00000005 +#define regk_iop_sap_out_gio_out18 0x00000006 +#define regk_iop_sap_out_gio_out2 0x00000004 +#define regk_iop_sap_out_gio_out26 0x00000007 +#define regk_iop_sap_out_inv 0x00000001 +#define regk_iop_sap_out_nand 0x00000003 +#define regk_iop_sap_out_no 0x00000000 +#define regk_iop_sap_out_none 0x00000000 +#define regk_iop_sap_out_one 0x00000001 +#define regk_iop_sap_out_rw_bus_default 0x00000000 +#define regk_iop_sap_out_rw_bus_hi_oe_default 0x00000000 +#define regk_iop_sap_out_rw_bus_lo_oe_default 0x00000000 +#define regk_iop_sap_out_rw_gen_gated_default 0x00000000 +#define regk_iop_sap_out_rw_gio_default 0x00000000 +#define regk_iop_sap_out_rw_gio_size 0x00000020 +#define regk_iop_sap_out_spu_gio6 0x00000002 +#define regk_iop_sap_out_spu_gio7 0x00000003 +#define regk_iop_sap_out_timer_grp0_tmr2 0x00000000 +#define regk_iop_sap_out_timer_grp0_tmr3 0x00000001 +#define regk_iop_sap_out_timer_grp1_tmr2 0x00000002 +#define regk_iop_sap_out_timer_grp1_tmr3 0x00000003 +#define regk_iop_sap_out_tmr200 0x00000001 +#define regk_iop_sap_out_yes 0x00000001 +#endif /* __iop_sap_out_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_cfg_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_cfg_defs_asm.h new file mode 100644 index 000000000000..3b3949b51a66 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_cfg_defs_asm.h @@ -0,0 +1,739 @@ +#ifndef __iop_sw_cfg_defs_asm_h +#define __iop_sw_cfg_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sw_cfg.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_cfg_defs_asm.h iop_sw_cfg.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_crc_par_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_crc_par_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_crc_par_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_crc_par_owner_offset 0 + +/* Register rw_dmc_in_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_dmc_in_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_dmc_in_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_dmc_in_owner_offset 4 + +/* Register rw_dmc_out_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_dmc_out_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_dmc_out_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_dmc_out_owner_offset 8 + +/* Register rw_fifo_in_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_in_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_in_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_in_owner_offset 12 + +/* Register rw_fifo_in_extra_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_in_extra_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_in_extra_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_in_extra_owner_offset 16 + +/* Register rw_fifo_out_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_out_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_out_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_out_owner_offset 20 + +/* Register rw_fifo_out_extra_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_fifo_out_extra_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_fifo_out_extra_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_fifo_out_extra_owner_offset 24 + +/* Register rw_sap_in_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_sap_in_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_sap_in_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_sap_in_owner_offset 28 + +/* Register rw_sap_out_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_sap_out_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_sap_out_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_sap_out_owner_offset 32 + +/* Register rw_scrc_in_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_scrc_in_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_scrc_in_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_scrc_in_owner_offset 36 + +/* Register rw_scrc_out_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_scrc_out_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_scrc_out_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_scrc_out_owner_offset 40 + +/* Register rw_spu_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_spu_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_spu_owner___cfg___width 1 +#define reg_iop_sw_cfg_rw_spu_owner___cfg___bit 0 +#define reg_iop_sw_cfg_rw_spu_owner_offset 44 + +/* Register rw_timer_grp0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_owner_offset 48 + +/* Register rw_timer_grp1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_owner_offset 52 + +/* Register rw_trigger_grp0_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp0_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp0_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp0_owner_offset 56 + +/* Register rw_trigger_grp1_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp1_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp1_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp1_owner_offset 60 + +/* Register rw_trigger_grp2_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp2_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp2_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp2_owner_offset 64 + +/* Register rw_trigger_grp3_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp3_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp3_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp3_owner_offset 68 + +/* Register rw_trigger_grp4_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp4_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp4_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp4_owner_offset 72 + +/* Register rw_trigger_grp5_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp5_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp5_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp5_owner_offset 76 + +/* Register rw_trigger_grp6_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp6_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp6_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp6_owner_offset 80 + +/* Register rw_trigger_grp7_owner, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grp7_owner___cfg___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grp7_owner___cfg___width 2 +#define reg_iop_sw_cfg_rw_trigger_grp7_owner_offset 84 + +/* Register rw_bus_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus_mask___byte0___lsb 0 +#define reg_iop_sw_cfg_rw_bus_mask___byte0___width 8 +#define reg_iop_sw_cfg_rw_bus_mask___byte1___lsb 8 +#define reg_iop_sw_cfg_rw_bus_mask___byte1___width 8 +#define reg_iop_sw_cfg_rw_bus_mask___byte2___lsb 16 +#define reg_iop_sw_cfg_rw_bus_mask___byte2___width 8 +#define reg_iop_sw_cfg_rw_bus_mask___byte3___lsb 24 +#define reg_iop_sw_cfg_rw_bus_mask___byte3___width 8 +#define reg_iop_sw_cfg_rw_bus_mask_offset 88 + +/* Register rw_bus_oe_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte0___lsb 0 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte0___width 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte0___bit 0 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte1___lsb 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte1___width 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte1___bit 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte2___lsb 2 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte2___width 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte2___bit 2 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte3___lsb 3 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte3___width 1 +#define reg_iop_sw_cfg_rw_bus_oe_mask___byte3___bit 3 +#define reg_iop_sw_cfg_rw_bus_oe_mask_offset 92 + +/* Register rw_gio_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_mask___val___lsb 0 +#define reg_iop_sw_cfg_rw_gio_mask___val___width 32 +#define reg_iop_sw_cfg_rw_gio_mask_offset 96 + +/* Register rw_gio_oe_mask, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_oe_mask___val___lsb 0 +#define reg_iop_sw_cfg_rw_gio_oe_mask___val___width 32 +#define reg_iop_sw_cfg_rw_gio_oe_mask_offset 100 + +/* Register rw_pinmapping, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte0___lsb 0 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte0___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte1___lsb 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte1___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte2___lsb 4 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte2___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte3___lsb 6 +#define reg_iop_sw_cfg_rw_pinmapping___bus_byte3___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio3_0___lsb 8 +#define reg_iop_sw_cfg_rw_pinmapping___gio3_0___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio7_4___lsb 10 +#define reg_iop_sw_cfg_rw_pinmapping___gio7_4___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio11_8___lsb 12 +#define reg_iop_sw_cfg_rw_pinmapping___gio11_8___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio15_12___lsb 14 +#define reg_iop_sw_cfg_rw_pinmapping___gio15_12___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio19_16___lsb 16 +#define reg_iop_sw_cfg_rw_pinmapping___gio19_16___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio23_20___lsb 18 +#define reg_iop_sw_cfg_rw_pinmapping___gio23_20___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio27_24___lsb 20 +#define reg_iop_sw_cfg_rw_pinmapping___gio27_24___width 2 +#define reg_iop_sw_cfg_rw_pinmapping___gio31_28___lsb 22 +#define reg_iop_sw_cfg_rw_pinmapping___gio31_28___width 2 +#define reg_iop_sw_cfg_rw_pinmapping_offset 104 + +/* Register rw_bus_out_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo___lsb 0 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo___width 2 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi___lsb 2 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi___width 2 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo_oe___lsb 4 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo_oe___width 2 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi_oe___lsb 6 +#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi_oe___width 2 +#define reg_iop_sw_cfg_rw_bus_out_cfg_offset 108 + +/* Register rw_gio_out_grp0_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg_offset 112 + +/* Register rw_gio_out_grp1_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg_offset 116 + +/* Register rw_gio_out_grp2_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg_offset 120 + +/* Register rw_gio_out_grp3_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg_offset 124 + +/* Register rw_gio_out_grp4_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg_offset 128 + +/* Register rw_gio_out_grp5_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg_offset 132 + +/* Register rw_gio_out_grp6_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg_offset 136 + +/* Register rw_gio_out_grp7_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28___lsb 0 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___lsb 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___bit 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29___lsb 4 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___lsb 7 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___bit 7 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30___lsb 8 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___lsb 11 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___bit 11 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31___lsb 12 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31___width 3 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___lsb 15 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___width 1 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___bit 15 +#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg_offset 140 + +/* Register rw_spu_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_spu_cfg___bus0_in___lsb 0 +#define reg_iop_sw_cfg_rw_spu_cfg___bus0_in___width 1 +#define reg_iop_sw_cfg_rw_spu_cfg___bus0_in___bit 0 +#define reg_iop_sw_cfg_rw_spu_cfg___bus1_in___lsb 1 +#define reg_iop_sw_cfg_rw_spu_cfg___bus1_in___width 1 +#define reg_iop_sw_cfg_rw_spu_cfg___bus1_in___bit 1 +#define reg_iop_sw_cfg_rw_spu_cfg_offset 144 + +/* Register rw_timer_grp0_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___ext_clk___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___ext_clk___width 3 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___lsb 3 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___lsb 5 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___lsb 7 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___lsb 9 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___lsb 11 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___lsb 13 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___lsb 15 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___lsb 17 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp0_cfg_offset 148 + +/* Register rw_timer_grp1_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___ext_clk___lsb 0 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___ext_clk___width 3 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___lsb 3 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___lsb 5 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___lsb 7 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___lsb 9 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___lsb 11 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___lsb 13 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___lsb 15 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___lsb 17 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___width 2 +#define reg_iop_sw_cfg_rw_timer_grp1_cfg_offset 152 + +/* Register rw_trigger_grps_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___lsb 0 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___bit 0 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___lsb 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___bit 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___lsb 2 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___bit 2 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___lsb 3 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___bit 3 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___lsb 4 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___bit 4 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___lsb 5 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___bit 5 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___lsb 6 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___bit 6 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___lsb 7 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___bit 7 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___lsb 8 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___bit 8 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___lsb 9 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___bit 9 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___lsb 10 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___bit 10 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___lsb 11 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___bit 11 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___lsb 12 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___bit 12 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___lsb 13 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___bit 13 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___lsb 14 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___bit 14 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___lsb 15 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___width 1 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___bit 15 +#define reg_iop_sw_cfg_rw_trigger_grps_cfg_offset 156 + +/* Register rw_pdp_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_pdp_cfg___out_strb___lsb 0 +#define reg_iop_sw_cfg_rw_pdp_cfg___out_strb___width 4 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_src___lsb 4 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_src___width 2 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_size___lsb 6 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_size___width 3 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_last___lsb 9 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_last___width 2 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_strb___lsb 11 +#define reg_iop_sw_cfg_rw_pdp_cfg___in_strb___width 4 +#define reg_iop_sw_cfg_rw_pdp_cfg_offset 160 + +/* Register rw_sdp_cfg, scope iop_sw_cfg, type rw */ +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out_strb___lsb 0 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out_strb___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_data___lsb 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_data___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_last___lsb 6 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_last___width 2 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_strb___lsb 8 +#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_strb___width 3 +#define reg_iop_sw_cfg_rw_sdp_cfg_offset 164 + + +/* Constants */ +#define regk_iop_sw_cfg_a 0x00000001 +#define regk_iop_sw_cfg_b 0x00000002 +#define regk_iop_sw_cfg_bus 0x00000000 +#define regk_iop_sw_cfg_bus_rot16 0x00000002 +#define regk_iop_sw_cfg_bus_rot24 0x00000003 +#define regk_iop_sw_cfg_bus_rot8 0x00000001 +#define regk_iop_sw_cfg_clk12 0x00000000 +#define regk_iop_sw_cfg_cpu 0x00000000 +#define regk_iop_sw_cfg_gated_clk0 0x0000000e +#define regk_iop_sw_cfg_gated_clk1 0x0000000f +#define regk_iop_sw_cfg_gio0 0x00000004 +#define regk_iop_sw_cfg_gio1 0x00000001 +#define regk_iop_sw_cfg_gio2 0x00000005 +#define regk_iop_sw_cfg_gio3 0x00000002 +#define regk_iop_sw_cfg_gio4 0x00000006 +#define regk_iop_sw_cfg_gio5 0x00000003 +#define regk_iop_sw_cfg_gio6 0x00000007 +#define regk_iop_sw_cfg_gio7 0x00000004 +#define regk_iop_sw_cfg_gio_in18 0x00000002 +#define regk_iop_sw_cfg_gio_in19 0x00000003 +#define regk_iop_sw_cfg_gio_in20 0x00000004 +#define regk_iop_sw_cfg_gio_in21 0x00000005 +#define regk_iop_sw_cfg_gio_in26 0x00000006 +#define regk_iop_sw_cfg_gio_in27 0x00000007 +#define regk_iop_sw_cfg_gio_in4 0x00000000 +#define regk_iop_sw_cfg_gio_in5 0x00000001 +#define regk_iop_sw_cfg_last_timer_grp0_tmr2 0x00000001 +#define regk_iop_sw_cfg_last_timer_grp1_tmr2 0x00000002 +#define regk_iop_sw_cfg_last_timer_grp1_tmr3 0x00000003 +#define regk_iop_sw_cfg_mpu 0x00000001 +#define regk_iop_sw_cfg_none 0x00000000 +#define regk_iop_sw_cfg_pdp_out 0x00000001 +#define regk_iop_sw_cfg_pdp_out_hi 0x00000001 +#define regk_iop_sw_cfg_pdp_out_lo 0x00000000 +#define regk_iop_sw_cfg_rw_bus_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_bus_oe_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_bus_out_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_crc_par_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_dmc_in_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_dmc_out_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_in_extra_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_in_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_out_extra_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_fifo_out_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_oe_mask_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp0_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp1_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp2_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp3_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp4_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp5_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp6_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_gio_out_grp7_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_pdp_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_pinmapping_default 0x00555555 +#define regk_iop_sw_cfg_rw_sap_in_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_sap_out_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_scrc_in_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_scrc_out_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_sdp_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_spu_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_spu_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp0_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp1_cfg_default 0x00000000 +#define regk_iop_sw_cfg_rw_timer_grp1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp0_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp1_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp2_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp3_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp4_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp5_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp6_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grp7_owner_default 0x00000000 +#define regk_iop_sw_cfg_rw_trigger_grps_cfg_default 0x00000000 +#define regk_iop_sw_cfg_sdp_out 0x00000004 +#define regk_iop_sw_cfg_size16 0x00000002 +#define regk_iop_sw_cfg_size24 0x00000003 +#define regk_iop_sw_cfg_size32 0x00000004 +#define regk_iop_sw_cfg_size8 0x00000001 +#define regk_iop_sw_cfg_spu 0x00000002 +#define regk_iop_sw_cfg_spu_bus_out0_hi 0x00000002 +#define regk_iop_sw_cfg_spu_bus_out0_lo 0x00000002 +#define regk_iop_sw_cfg_spu_bus_out1_hi 0x00000003 +#define regk_iop_sw_cfg_spu_bus_out1_lo 0x00000003 +#define regk_iop_sw_cfg_spu_g0 0x00000007 +#define regk_iop_sw_cfg_spu_g1 0x00000007 +#define regk_iop_sw_cfg_spu_g2 0x00000007 +#define regk_iop_sw_cfg_spu_g3 0x00000007 +#define regk_iop_sw_cfg_spu_g4 0x00000007 +#define regk_iop_sw_cfg_spu_g5 0x00000007 +#define regk_iop_sw_cfg_spu_g6 0x00000007 +#define regk_iop_sw_cfg_spu_g7 0x00000007 +#define regk_iop_sw_cfg_spu_gio0 0x00000000 +#define regk_iop_sw_cfg_spu_gio1 0x00000001 +#define regk_iop_sw_cfg_spu_gio5 0x00000005 +#define regk_iop_sw_cfg_spu_gio6 0x00000006 +#define regk_iop_sw_cfg_spu_gio7 0x00000007 +#define regk_iop_sw_cfg_spu_gio_out0 0x00000008 +#define regk_iop_sw_cfg_spu_gio_out1 0x00000009 +#define regk_iop_sw_cfg_spu_gio_out2 0x0000000a +#define regk_iop_sw_cfg_spu_gio_out3 0x0000000b +#define regk_iop_sw_cfg_spu_gio_out4 0x0000000c +#define regk_iop_sw_cfg_spu_gio_out5 0x0000000d +#define regk_iop_sw_cfg_spu_gio_out6 0x0000000e +#define regk_iop_sw_cfg_spu_gio_out7 0x0000000f +#define regk_iop_sw_cfg_spu_gioout0 0x00000000 +#define regk_iop_sw_cfg_spu_gioout1 0x00000000 +#define regk_iop_sw_cfg_spu_gioout10 0x00000007 +#define regk_iop_sw_cfg_spu_gioout11 0x00000007 +#define regk_iop_sw_cfg_spu_gioout12 0x00000007 +#define regk_iop_sw_cfg_spu_gioout13 0x00000007 +#define regk_iop_sw_cfg_spu_gioout14 0x00000007 +#define regk_iop_sw_cfg_spu_gioout15 0x00000007 +#define regk_iop_sw_cfg_spu_gioout16 0x00000007 +#define regk_iop_sw_cfg_spu_gioout17 0x00000007 +#define regk_iop_sw_cfg_spu_gioout18 0x00000007 +#define regk_iop_sw_cfg_spu_gioout19 0x00000007 +#define regk_iop_sw_cfg_spu_gioout2 0x00000001 +#define regk_iop_sw_cfg_spu_gioout20 0x00000007 +#define regk_iop_sw_cfg_spu_gioout21 0x00000007 +#define regk_iop_sw_cfg_spu_gioout22 0x00000007 +#define regk_iop_sw_cfg_spu_gioout23 0x00000007 +#define regk_iop_sw_cfg_spu_gioout24 0x00000007 +#define regk_iop_sw_cfg_spu_gioout25 0x00000007 +#define regk_iop_sw_cfg_spu_gioout26 0x00000007 +#define regk_iop_sw_cfg_spu_gioout27 0x00000007 +#define regk_iop_sw_cfg_spu_gioout28 0x00000007 +#define regk_iop_sw_cfg_spu_gioout29 0x00000007 +#define regk_iop_sw_cfg_spu_gioout3 0x00000001 +#define regk_iop_sw_cfg_spu_gioout30 0x00000007 +#define regk_iop_sw_cfg_spu_gioout31 0x00000007 +#define regk_iop_sw_cfg_spu_gioout4 0x00000002 +#define regk_iop_sw_cfg_spu_gioout5 0x00000002 +#define regk_iop_sw_cfg_spu_gioout6 0x00000003 +#define regk_iop_sw_cfg_spu_gioout7 0x00000003 +#define regk_iop_sw_cfg_spu_gioout8 0x00000007 +#define regk_iop_sw_cfg_spu_gioout9 0x00000007 +#define regk_iop_sw_cfg_strb_timer_grp0_tmr0 0x00000001 +#define regk_iop_sw_cfg_strb_timer_grp0_tmr1 0x00000002 +#define regk_iop_sw_cfg_strb_timer_grp1_tmr0 0x00000003 +#define regk_iop_sw_cfg_strb_timer_grp1_tmr1 0x00000002 +#define regk_iop_sw_cfg_timer_grp0 0x00000000 +#define regk_iop_sw_cfg_timer_grp0_rot 0x00000001 +#define regk_iop_sw_cfg_timer_grp0_strb0 0x00000005 +#define regk_iop_sw_cfg_timer_grp0_strb1 0x00000005 +#define regk_iop_sw_cfg_timer_grp0_strb2 0x00000005 +#define regk_iop_sw_cfg_timer_grp0_strb3 0x00000005 +#define regk_iop_sw_cfg_timer_grp0_tmr0 0x00000002 +#define regk_iop_sw_cfg_timer_grp1 0x00000000 +#define regk_iop_sw_cfg_timer_grp1_rot 0x00000001 +#define regk_iop_sw_cfg_timer_grp1_strb0 0x00000006 +#define regk_iop_sw_cfg_timer_grp1_strb1 0x00000006 +#define regk_iop_sw_cfg_timer_grp1_strb2 0x00000006 +#define regk_iop_sw_cfg_timer_grp1_strb3 0x00000006 +#define regk_iop_sw_cfg_timer_grp1_tmr0 0x00000003 +#define regk_iop_sw_cfg_trig0_0 0x00000000 +#define regk_iop_sw_cfg_trig0_1 0x00000000 +#define regk_iop_sw_cfg_trig0_2 0x00000000 +#define regk_iop_sw_cfg_trig0_3 0x00000000 +#define regk_iop_sw_cfg_trig1_0 0x00000000 +#define regk_iop_sw_cfg_trig1_1 0x00000000 +#define regk_iop_sw_cfg_trig1_2 0x00000000 +#define regk_iop_sw_cfg_trig1_3 0x00000000 +#define regk_iop_sw_cfg_trig2_0 0x00000001 +#define regk_iop_sw_cfg_trig2_1 0x00000001 +#define regk_iop_sw_cfg_trig2_2 0x00000001 +#define regk_iop_sw_cfg_trig2_3 0x00000001 +#define regk_iop_sw_cfg_trig3_0 0x00000001 +#define regk_iop_sw_cfg_trig3_1 0x00000001 +#define regk_iop_sw_cfg_trig3_2 0x00000001 +#define regk_iop_sw_cfg_trig3_3 0x00000001 +#define regk_iop_sw_cfg_trig4_0 0x00000002 +#define regk_iop_sw_cfg_trig4_1 0x00000002 +#define regk_iop_sw_cfg_trig4_2 0x00000002 +#define regk_iop_sw_cfg_trig4_3 0x00000002 +#define regk_iop_sw_cfg_trig5_0 0x00000002 +#define regk_iop_sw_cfg_trig5_1 0x00000002 +#define regk_iop_sw_cfg_trig5_2 0x00000002 +#define regk_iop_sw_cfg_trig5_3 0x00000002 +#define regk_iop_sw_cfg_trig6_0 0x00000003 +#define regk_iop_sw_cfg_trig6_1 0x00000003 +#define regk_iop_sw_cfg_trig6_2 0x00000003 +#define regk_iop_sw_cfg_trig6_3 0x00000003 +#define regk_iop_sw_cfg_trig7_0 0x00000003 +#define regk_iop_sw_cfg_trig7_1 0x00000003 +#define regk_iop_sw_cfg_trig7_2 0x00000003 +#define regk_iop_sw_cfg_trig7_3 0x00000003 +#endif /* __iop_sw_cfg_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_cpu_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_cpu_defs_asm.h new file mode 100644 index 000000000000..3f4fe1b31815 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_cpu_defs_asm.h @@ -0,0 +1,950 @@ +#ifndef __iop_sw_cpu_defs_asm_h +#define __iop_sw_cpu_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sw_cpu.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_cpu_defs_asm.h iop_sw_cpu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_mpu_trace, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_mpu_trace_offset 0 + +/* Register r_spu_trace, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_spu_trace_offset 4 + +/* Register r_spu_fsm_trace, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_spu_fsm_trace_offset 8 + +/* Register rw_mc_ctrl, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___lsb 0 +#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___width 1 +#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___bit 0 +#define reg_iop_sw_cpu_rw_mc_ctrl___cmd___lsb 1 +#define reg_iop_sw_cpu_rw_mc_ctrl___cmd___width 2 +#define reg_iop_sw_cpu_rw_mc_ctrl___size___lsb 3 +#define reg_iop_sw_cpu_rw_mc_ctrl___size___width 3 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu_mem___lsb 6 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu_mem___width 1 +#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu_mem___bit 6 +#define reg_iop_sw_cpu_rw_mc_ctrl_offset 12 + +/* Register rw_mc_data, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_mc_data___val___lsb 0 +#define reg_iop_sw_cpu_rw_mc_data___val___width 32 +#define reg_iop_sw_cpu_rw_mc_data_offset 16 + +/* Register rw_mc_addr, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_mc_addr_offset 20 + +/* Register rs_mc_data, scope iop_sw_cpu, type rs */ +#define reg_iop_sw_cpu_rs_mc_data_offset 24 + +/* Register r_mc_data, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_mc_data_offset 28 + +/* Register r_mc_stat, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___lsb 0 +#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___bit 0 +#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___lsb 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___bit 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu___lsb 2 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___busy_spu___bit 2 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___lsb 3 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___bit 3 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___lsb 4 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___bit 4 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu___lsb 5 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu___width 1 +#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu___bit 5 +#define reg_iop_sw_cpu_r_mc_stat_offset 32 + +/* Register rw_bus_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte0___width 8 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte1___lsb 8 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte1___width 8 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte2___lsb 16 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte2___width 8 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte3___lsb 24 +#define reg_iop_sw_cpu_rw_bus_clr_mask___byte3___width 8 +#define reg_iop_sw_cpu_rw_bus_clr_mask_offset 36 + +/* Register rw_bus_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus_set_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte0___width 8 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte1___lsb 8 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte1___width 8 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte2___lsb 16 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte2___width 8 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte3___lsb 24 +#define reg_iop_sw_cpu_rw_bus_set_mask___byte3___width 8 +#define reg_iop_sw_cpu_rw_bus_set_mask_offset 40 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_cpu_rw_bus_oe_clr_mask_offset 44 + +/* Register rw_bus_oe_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte0___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte1___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte2___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte3___width 1 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_cpu_rw_bus_oe_set_mask_offset 48 + +/* Register r_bus_in, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_bus_in_offset 52 + +/* Register rw_gio_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_clr_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_clr_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_clr_mask_offset 56 + +/* Register rw_gio_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_set_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_set_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_set_mask_offset 60 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_oe_clr_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_oe_clr_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_oe_clr_mask_offset 64 + +/* Register rw_gio_oe_set_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_gio_oe_set_mask___val___lsb 0 +#define reg_iop_sw_cpu_rw_gio_oe_set_mask___val___width 32 +#define reg_iop_sw_cpu_rw_gio_oe_set_mask_offset 68 + +/* Register r_gio_in, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_gio_in_offset 72 + +/* Register rw_intr0_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___lsb 0 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___bit 0 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___lsb 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___bit 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___lsb 2 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___bit 2 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___lsb 3 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___bit 3 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___lsb 4 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___bit 4 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___lsb 5 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___bit 5 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___lsb 6 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___bit 6 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___lsb 7 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___bit 7 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___lsb 8 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___bit 8 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___lsb 9 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___bit 9 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___lsb 10 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___bit 10 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___lsb 11 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___bit 11 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___lsb 12 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___bit 12 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___lsb 13 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___bit 13 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___lsb 14 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___bit 14 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___lsb 15 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___bit 15 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_0___lsb 16 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_0___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_0___bit 16 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_1___lsb 17 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_1___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_1___bit 17 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_2___lsb 18 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_2___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_2___bit 18 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_3___lsb 19 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_3___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_3___bit 19 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_4___lsb 20 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_4___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_4___bit 20 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_5___lsb 21 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_5___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_5___bit 21 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_6___lsb 22 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_6___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_6___bit 22 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_7___lsb 23 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_7___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_7___bit 23 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_8___lsb 24 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_8___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_8___bit 24 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_9___lsb 25 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_9___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_9___bit 25 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_10___lsb 26 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_10___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_10___bit 26 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_11___lsb 27 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_11___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_11___bit 27 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_12___lsb 28 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_12___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_12___bit 28 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_13___lsb 29 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_13___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_13___bit 29 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_14___lsb 30 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_14___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_14___bit 30 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_15___lsb 31 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_15___width 1 +#define reg_iop_sw_cpu_rw_intr0_mask___spu_15___bit 31 +#define reg_iop_sw_cpu_rw_intr0_mask_offset 76 + +/* Register rw_ack_intr0, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___lsb 0 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___bit 0 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___lsb 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___bit 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___lsb 2 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___bit 2 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___lsb 3 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___bit 3 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___lsb 4 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___bit 4 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___lsb 5 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___bit 5 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___lsb 6 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___bit 6 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___lsb 7 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___bit 7 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___lsb 8 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___bit 8 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___lsb 9 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___bit 9 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___lsb 10 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___bit 10 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___lsb 11 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___bit 11 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___lsb 12 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___bit 12 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___lsb 13 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___bit 13 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___lsb 14 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___bit 14 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___lsb 15 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___bit 15 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_0___lsb 16 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_0___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_0___bit 16 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_1___lsb 17 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_1___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_1___bit 17 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_2___lsb 18 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_2___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_2___bit 18 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_3___lsb 19 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_3___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_3___bit 19 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_4___lsb 20 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_4___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_4___bit 20 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_5___lsb 21 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_5___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_5___bit 21 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_6___lsb 22 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_6___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_6___bit 22 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_7___lsb 23 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_7___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_7___bit 23 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_8___lsb 24 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_8___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_8___bit 24 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_9___lsb 25 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_9___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_9___bit 25 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_10___lsb 26 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_10___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_10___bit 26 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_11___lsb 27 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_11___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_11___bit 27 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_12___lsb 28 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_12___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_12___bit 28 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_13___lsb 29 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_13___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_13___bit 29 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_14___lsb 30 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_14___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_14___bit 30 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_15___lsb 31 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_15___width 1 +#define reg_iop_sw_cpu_rw_ack_intr0___spu_15___bit 31 +#define reg_iop_sw_cpu_rw_ack_intr0_offset 80 + +/* Register r_intr0, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_intr0___mpu_0___lsb 0 +#define reg_iop_sw_cpu_r_intr0___mpu_0___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_0___bit 0 +#define reg_iop_sw_cpu_r_intr0___mpu_1___lsb 1 +#define reg_iop_sw_cpu_r_intr0___mpu_1___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_1___bit 1 +#define reg_iop_sw_cpu_r_intr0___mpu_2___lsb 2 +#define reg_iop_sw_cpu_r_intr0___mpu_2___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_2___bit 2 +#define reg_iop_sw_cpu_r_intr0___mpu_3___lsb 3 +#define reg_iop_sw_cpu_r_intr0___mpu_3___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_3___bit 3 +#define reg_iop_sw_cpu_r_intr0___mpu_4___lsb 4 +#define reg_iop_sw_cpu_r_intr0___mpu_4___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_4___bit 4 +#define reg_iop_sw_cpu_r_intr0___mpu_5___lsb 5 +#define reg_iop_sw_cpu_r_intr0___mpu_5___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_5___bit 5 +#define reg_iop_sw_cpu_r_intr0___mpu_6___lsb 6 +#define reg_iop_sw_cpu_r_intr0___mpu_6___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_6___bit 6 +#define reg_iop_sw_cpu_r_intr0___mpu_7___lsb 7 +#define reg_iop_sw_cpu_r_intr0___mpu_7___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_7___bit 7 +#define reg_iop_sw_cpu_r_intr0___mpu_8___lsb 8 +#define reg_iop_sw_cpu_r_intr0___mpu_8___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_8___bit 8 +#define reg_iop_sw_cpu_r_intr0___mpu_9___lsb 9 +#define reg_iop_sw_cpu_r_intr0___mpu_9___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_9___bit 9 +#define reg_iop_sw_cpu_r_intr0___mpu_10___lsb 10 +#define reg_iop_sw_cpu_r_intr0___mpu_10___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_10___bit 10 +#define reg_iop_sw_cpu_r_intr0___mpu_11___lsb 11 +#define reg_iop_sw_cpu_r_intr0___mpu_11___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_11___bit 11 +#define reg_iop_sw_cpu_r_intr0___mpu_12___lsb 12 +#define reg_iop_sw_cpu_r_intr0___mpu_12___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_12___bit 12 +#define reg_iop_sw_cpu_r_intr0___mpu_13___lsb 13 +#define reg_iop_sw_cpu_r_intr0___mpu_13___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_13___bit 13 +#define reg_iop_sw_cpu_r_intr0___mpu_14___lsb 14 +#define reg_iop_sw_cpu_r_intr0___mpu_14___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_14___bit 14 +#define reg_iop_sw_cpu_r_intr0___mpu_15___lsb 15 +#define reg_iop_sw_cpu_r_intr0___mpu_15___width 1 +#define reg_iop_sw_cpu_r_intr0___mpu_15___bit 15 +#define reg_iop_sw_cpu_r_intr0___spu_0___lsb 16 +#define reg_iop_sw_cpu_r_intr0___spu_0___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_0___bit 16 +#define reg_iop_sw_cpu_r_intr0___spu_1___lsb 17 +#define reg_iop_sw_cpu_r_intr0___spu_1___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_1___bit 17 +#define reg_iop_sw_cpu_r_intr0___spu_2___lsb 18 +#define reg_iop_sw_cpu_r_intr0___spu_2___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_2___bit 18 +#define reg_iop_sw_cpu_r_intr0___spu_3___lsb 19 +#define reg_iop_sw_cpu_r_intr0___spu_3___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_3___bit 19 +#define reg_iop_sw_cpu_r_intr0___spu_4___lsb 20 +#define reg_iop_sw_cpu_r_intr0___spu_4___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_4___bit 20 +#define reg_iop_sw_cpu_r_intr0___spu_5___lsb 21 +#define reg_iop_sw_cpu_r_intr0___spu_5___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_5___bit 21 +#define reg_iop_sw_cpu_r_intr0___spu_6___lsb 22 +#define reg_iop_sw_cpu_r_intr0___spu_6___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_6___bit 22 +#define reg_iop_sw_cpu_r_intr0___spu_7___lsb 23 +#define reg_iop_sw_cpu_r_intr0___spu_7___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_7___bit 23 +#define reg_iop_sw_cpu_r_intr0___spu_8___lsb 24 +#define reg_iop_sw_cpu_r_intr0___spu_8___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_8___bit 24 +#define reg_iop_sw_cpu_r_intr0___spu_9___lsb 25 +#define reg_iop_sw_cpu_r_intr0___spu_9___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_9___bit 25 +#define reg_iop_sw_cpu_r_intr0___spu_10___lsb 26 +#define reg_iop_sw_cpu_r_intr0___spu_10___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_10___bit 26 +#define reg_iop_sw_cpu_r_intr0___spu_11___lsb 27 +#define reg_iop_sw_cpu_r_intr0___spu_11___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_11___bit 27 +#define reg_iop_sw_cpu_r_intr0___spu_12___lsb 28 +#define reg_iop_sw_cpu_r_intr0___spu_12___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_12___bit 28 +#define reg_iop_sw_cpu_r_intr0___spu_13___lsb 29 +#define reg_iop_sw_cpu_r_intr0___spu_13___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_13___bit 29 +#define reg_iop_sw_cpu_r_intr0___spu_14___lsb 30 +#define reg_iop_sw_cpu_r_intr0___spu_14___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_14___bit 30 +#define reg_iop_sw_cpu_r_intr0___spu_15___lsb 31 +#define reg_iop_sw_cpu_r_intr0___spu_15___width 1 +#define reg_iop_sw_cpu_r_intr0___spu_15___bit 31 +#define reg_iop_sw_cpu_r_intr0_offset 84 + +/* Register r_masked_intr0, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___lsb 0 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___bit 0 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___lsb 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___bit 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___lsb 2 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___bit 2 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___lsb 3 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___bit 3 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___lsb 4 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___bit 4 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___lsb 5 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___bit 5 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___lsb 6 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___bit 6 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___lsb 7 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___bit 7 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___lsb 8 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___bit 8 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___lsb 9 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___bit 9 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___lsb 10 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___bit 10 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___lsb 11 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___bit 11 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___lsb 12 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___bit 12 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___lsb 13 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___bit 13 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___lsb 14 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___bit 14 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___lsb 15 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___bit 15 +#define reg_iop_sw_cpu_r_masked_intr0___spu_0___lsb 16 +#define reg_iop_sw_cpu_r_masked_intr0___spu_0___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_0___bit 16 +#define reg_iop_sw_cpu_r_masked_intr0___spu_1___lsb 17 +#define reg_iop_sw_cpu_r_masked_intr0___spu_1___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_1___bit 17 +#define reg_iop_sw_cpu_r_masked_intr0___spu_2___lsb 18 +#define reg_iop_sw_cpu_r_masked_intr0___spu_2___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_2___bit 18 +#define reg_iop_sw_cpu_r_masked_intr0___spu_3___lsb 19 +#define reg_iop_sw_cpu_r_masked_intr0___spu_3___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_3___bit 19 +#define reg_iop_sw_cpu_r_masked_intr0___spu_4___lsb 20 +#define reg_iop_sw_cpu_r_masked_intr0___spu_4___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_4___bit 20 +#define reg_iop_sw_cpu_r_masked_intr0___spu_5___lsb 21 +#define reg_iop_sw_cpu_r_masked_intr0___spu_5___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_5___bit 21 +#define reg_iop_sw_cpu_r_masked_intr0___spu_6___lsb 22 +#define reg_iop_sw_cpu_r_masked_intr0___spu_6___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_6___bit 22 +#define reg_iop_sw_cpu_r_masked_intr0___spu_7___lsb 23 +#define reg_iop_sw_cpu_r_masked_intr0___spu_7___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_7___bit 23 +#define reg_iop_sw_cpu_r_masked_intr0___spu_8___lsb 24 +#define reg_iop_sw_cpu_r_masked_intr0___spu_8___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_8___bit 24 +#define reg_iop_sw_cpu_r_masked_intr0___spu_9___lsb 25 +#define reg_iop_sw_cpu_r_masked_intr0___spu_9___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_9___bit 25 +#define reg_iop_sw_cpu_r_masked_intr0___spu_10___lsb 26 +#define reg_iop_sw_cpu_r_masked_intr0___spu_10___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_10___bit 26 +#define reg_iop_sw_cpu_r_masked_intr0___spu_11___lsb 27 +#define reg_iop_sw_cpu_r_masked_intr0___spu_11___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_11___bit 27 +#define reg_iop_sw_cpu_r_masked_intr0___spu_12___lsb 28 +#define reg_iop_sw_cpu_r_masked_intr0___spu_12___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_12___bit 28 +#define reg_iop_sw_cpu_r_masked_intr0___spu_13___lsb 29 +#define reg_iop_sw_cpu_r_masked_intr0___spu_13___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_13___bit 29 +#define reg_iop_sw_cpu_r_masked_intr0___spu_14___lsb 30 +#define reg_iop_sw_cpu_r_masked_intr0___spu_14___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_14___bit 30 +#define reg_iop_sw_cpu_r_masked_intr0___spu_15___lsb 31 +#define reg_iop_sw_cpu_r_masked_intr0___spu_15___width 1 +#define reg_iop_sw_cpu_r_masked_intr0___spu_15___bit 31 +#define reg_iop_sw_cpu_r_masked_intr0_offset 88 + +/* Register rw_intr1_mask, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___lsb 0 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___bit 0 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___lsb 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___bit 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___lsb 2 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___bit 2 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___lsb 3 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___bit 3 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___lsb 4 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___bit 4 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___lsb 5 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___bit 5 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___lsb 6 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___bit 6 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___lsb 7 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___bit 7 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___lsb 8 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___bit 8 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___lsb 9 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___bit 9 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___lsb 10 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___bit 10 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___lsb 11 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___bit 11 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___lsb 12 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___bit 12 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___lsb 13 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___bit 13 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___lsb 14 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___bit 14 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___lsb 15 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___bit 15 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_in___lsb 16 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_in___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_in___bit 16 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_out___lsb 17 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_out___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___dmc_out___bit 17 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in___lsb 18 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in___bit 18 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out___lsb 19 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out___bit 19 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in_extra___lsb 20 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in_extra___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in_extra___bit 20 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out_extra___lsb 21 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out_extra___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out_extra___bit 21 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp0___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp1___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp2___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp3___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp4___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp5___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp6___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp7___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp0___lsb 30 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp0___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp0___bit 30 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp1___lsb 31 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp1___width 1 +#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp1___bit 31 +#define reg_iop_sw_cpu_rw_intr1_mask_offset 92 + +/* Register rw_ack_intr1, scope iop_sw_cpu, type rw */ +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___lsb 0 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___bit 0 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___lsb 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___bit 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___lsb 2 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___bit 2 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___lsb 3 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___bit 3 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___lsb 4 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___bit 4 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___lsb 5 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___bit 5 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___lsb 6 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___bit 6 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___lsb 7 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___bit 7 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___lsb 8 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___bit 8 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___lsb 9 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___bit 9 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___lsb 10 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___bit 10 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___lsb 11 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___bit 11 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___lsb 12 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___bit 12 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___lsb 13 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___bit 13 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___lsb 14 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___bit 14 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___lsb 15 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___width 1 +#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___bit 15 +#define reg_iop_sw_cpu_rw_ack_intr1_offset 96 + +/* Register r_intr1, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_intr1___mpu_16___lsb 0 +#define reg_iop_sw_cpu_r_intr1___mpu_16___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_16___bit 0 +#define reg_iop_sw_cpu_r_intr1___mpu_17___lsb 1 +#define reg_iop_sw_cpu_r_intr1___mpu_17___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_17___bit 1 +#define reg_iop_sw_cpu_r_intr1___mpu_18___lsb 2 +#define reg_iop_sw_cpu_r_intr1___mpu_18___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_18___bit 2 +#define reg_iop_sw_cpu_r_intr1___mpu_19___lsb 3 +#define reg_iop_sw_cpu_r_intr1___mpu_19___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_19___bit 3 +#define reg_iop_sw_cpu_r_intr1___mpu_20___lsb 4 +#define reg_iop_sw_cpu_r_intr1___mpu_20___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_20___bit 4 +#define reg_iop_sw_cpu_r_intr1___mpu_21___lsb 5 +#define reg_iop_sw_cpu_r_intr1___mpu_21___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_21___bit 5 +#define reg_iop_sw_cpu_r_intr1___mpu_22___lsb 6 +#define reg_iop_sw_cpu_r_intr1___mpu_22___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_22___bit 6 +#define reg_iop_sw_cpu_r_intr1___mpu_23___lsb 7 +#define reg_iop_sw_cpu_r_intr1___mpu_23___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_23___bit 7 +#define reg_iop_sw_cpu_r_intr1___mpu_24___lsb 8 +#define reg_iop_sw_cpu_r_intr1___mpu_24___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_24___bit 8 +#define reg_iop_sw_cpu_r_intr1___mpu_25___lsb 9 +#define reg_iop_sw_cpu_r_intr1___mpu_25___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_25___bit 9 +#define reg_iop_sw_cpu_r_intr1___mpu_26___lsb 10 +#define reg_iop_sw_cpu_r_intr1___mpu_26___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_26___bit 10 +#define reg_iop_sw_cpu_r_intr1___mpu_27___lsb 11 +#define reg_iop_sw_cpu_r_intr1___mpu_27___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_27___bit 11 +#define reg_iop_sw_cpu_r_intr1___mpu_28___lsb 12 +#define reg_iop_sw_cpu_r_intr1___mpu_28___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_28___bit 12 +#define reg_iop_sw_cpu_r_intr1___mpu_29___lsb 13 +#define reg_iop_sw_cpu_r_intr1___mpu_29___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_29___bit 13 +#define reg_iop_sw_cpu_r_intr1___mpu_30___lsb 14 +#define reg_iop_sw_cpu_r_intr1___mpu_30___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_30___bit 14 +#define reg_iop_sw_cpu_r_intr1___mpu_31___lsb 15 +#define reg_iop_sw_cpu_r_intr1___mpu_31___width 1 +#define reg_iop_sw_cpu_r_intr1___mpu_31___bit 15 +#define reg_iop_sw_cpu_r_intr1___dmc_in___lsb 16 +#define reg_iop_sw_cpu_r_intr1___dmc_in___width 1 +#define reg_iop_sw_cpu_r_intr1___dmc_in___bit 16 +#define reg_iop_sw_cpu_r_intr1___dmc_out___lsb 17 +#define reg_iop_sw_cpu_r_intr1___dmc_out___width 1 +#define reg_iop_sw_cpu_r_intr1___dmc_out___bit 17 +#define reg_iop_sw_cpu_r_intr1___fifo_in___lsb 18 +#define reg_iop_sw_cpu_r_intr1___fifo_in___width 1 +#define reg_iop_sw_cpu_r_intr1___fifo_in___bit 18 +#define reg_iop_sw_cpu_r_intr1___fifo_out___lsb 19 +#define reg_iop_sw_cpu_r_intr1___fifo_out___width 1 +#define reg_iop_sw_cpu_r_intr1___fifo_out___bit 19 +#define reg_iop_sw_cpu_r_intr1___fifo_in_extra___lsb 20 +#define reg_iop_sw_cpu_r_intr1___fifo_in_extra___width 1 +#define reg_iop_sw_cpu_r_intr1___fifo_in_extra___bit 20 +#define reg_iop_sw_cpu_r_intr1___fifo_out_extra___lsb 21 +#define reg_iop_sw_cpu_r_intr1___fifo_out_extra___width 1 +#define reg_iop_sw_cpu_r_intr1___fifo_out_extra___bit 21 +#define reg_iop_sw_cpu_r_intr1___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_r_intr1___trigger_grp0___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_r_intr1___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_r_intr1___trigger_grp1___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_r_intr1___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_r_intr1___trigger_grp2___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_r_intr1___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_r_intr1___trigger_grp3___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_r_intr1___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_r_intr1___trigger_grp4___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_r_intr1___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_r_intr1___trigger_grp5___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_r_intr1___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_r_intr1___trigger_grp6___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_r_intr1___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_r_intr1___trigger_grp7___width 1 +#define reg_iop_sw_cpu_r_intr1___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_r_intr1___timer_grp0___lsb 30 +#define reg_iop_sw_cpu_r_intr1___timer_grp0___width 1 +#define reg_iop_sw_cpu_r_intr1___timer_grp0___bit 30 +#define reg_iop_sw_cpu_r_intr1___timer_grp1___lsb 31 +#define reg_iop_sw_cpu_r_intr1___timer_grp1___width 1 +#define reg_iop_sw_cpu_r_intr1___timer_grp1___bit 31 +#define reg_iop_sw_cpu_r_intr1_offset 100 + +/* Register r_masked_intr1, scope iop_sw_cpu, type r */ +#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___lsb 0 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___bit 0 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___lsb 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___bit 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___lsb 2 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___bit 2 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___lsb 3 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___bit 3 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___lsb 4 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___bit 4 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___lsb 5 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___bit 5 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___lsb 6 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___bit 6 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___lsb 7 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___bit 7 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___lsb 8 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___bit 8 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___lsb 9 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___bit 9 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___lsb 10 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___bit 10 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___lsb 11 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___bit 11 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___lsb 12 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___bit 12 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___lsb 13 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___bit 13 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___lsb 14 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___bit 14 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___lsb 15 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___bit 15 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_in___lsb 16 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_in___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_in___bit 16 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_out___lsb 17 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_out___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___dmc_out___bit 17 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in___lsb 18 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in___bit 18 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out___lsb 19 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out___bit 19 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in_extra___lsb 20 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in_extra___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_in_extra___bit 20 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out_extra___lsb 21 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out_extra___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___fifo_out_extra___bit 21 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp0___lsb 22 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp0___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp0___bit 22 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp1___lsb 23 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp1___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp1___bit 23 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp2___lsb 24 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp2___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp2___bit 24 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp3___lsb 25 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp3___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp3___bit 25 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp4___lsb 26 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp4___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp4___bit 26 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp5___lsb 27 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp5___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp5___bit 27 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp6___lsb 28 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp6___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp6___bit 28 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp7___lsb 29 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp7___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp7___bit 29 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp0___lsb 30 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp0___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp0___bit 30 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp1___lsb 31 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp1___width 1 +#define reg_iop_sw_cpu_r_masked_intr1___timer_grp1___bit 31 +#define reg_iop_sw_cpu_r_masked_intr1_offset 104 + + +/* Constants */ +#define regk_iop_sw_cpu_copy 0x00000000 +#define regk_iop_sw_cpu_no 0x00000000 +#define regk_iop_sw_cpu_rd 0x00000002 +#define regk_iop_sw_cpu_reg_copy 0x00000001 +#define regk_iop_sw_cpu_rw_bus_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus_oe_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_bus_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_oe_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_gio_set_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_intr0_mask_default 0x00000000 +#define regk_iop_sw_cpu_rw_intr1_mask_default 0x00000000 +#define regk_iop_sw_cpu_wr 0x00000003 +#define regk_iop_sw_cpu_yes 0x00000001 +#endif /* __iop_sw_cpu_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_mpu_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_mpu_defs_asm.h new file mode 100644 index 000000000000..ffcc83b22d21 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_mpu_defs_asm.h @@ -0,0 +1,1086 @@ +#ifndef __iop_sw_mpu_defs_asm_h +#define __iop_sw_mpu_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sw_mpu.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_mpu_defs_asm.h iop_sw_mpu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_sw_cfg_owner, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_sw_cfg_owner___cfg___lsb 0 +#define reg_iop_sw_mpu_rw_sw_cfg_owner___cfg___width 2 +#define reg_iop_sw_mpu_rw_sw_cfg_owner_offset 0 + +/* Register r_spu_trace, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_spu_trace_offset 4 + +/* Register r_spu_fsm_trace, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_spu_fsm_trace_offset 8 + +/* Register rw_mc_ctrl, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___lsb 0 +#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___width 1 +#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___bit 0 +#define reg_iop_sw_mpu_rw_mc_ctrl___cmd___lsb 1 +#define reg_iop_sw_mpu_rw_mc_ctrl___cmd___width 2 +#define reg_iop_sw_mpu_rw_mc_ctrl___size___lsb 3 +#define reg_iop_sw_mpu_rw_mc_ctrl___size___width 3 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu_mem___lsb 6 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu_mem___width 1 +#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu_mem___bit 6 +#define reg_iop_sw_mpu_rw_mc_ctrl_offset 12 + +/* Register rw_mc_data, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_mc_data___val___lsb 0 +#define reg_iop_sw_mpu_rw_mc_data___val___width 32 +#define reg_iop_sw_mpu_rw_mc_data_offset 16 + +/* Register rw_mc_addr, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_mc_addr_offset 20 + +/* Register rs_mc_data, scope iop_sw_mpu, type rs */ +#define reg_iop_sw_mpu_rs_mc_data_offset 24 + +/* Register r_mc_data, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_mc_data_offset 28 + +/* Register r_mc_stat, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___lsb 0 +#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___bit 0 +#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___lsb 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___bit 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu___lsb 2 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___busy_spu___bit 2 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___lsb 3 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___bit 3 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___lsb 4 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___bit 4 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu___lsb 5 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu___width 1 +#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu___bit 5 +#define reg_iop_sw_mpu_r_mc_stat_offset 32 + +/* Register rw_bus_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte0___width 8 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte1___lsb 8 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte1___width 8 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte2___lsb 16 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte2___width 8 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte3___lsb 24 +#define reg_iop_sw_mpu_rw_bus_clr_mask___byte3___width 8 +#define reg_iop_sw_mpu_rw_bus_clr_mask_offset 36 + +/* Register rw_bus_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus_set_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte0___width 8 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte1___lsb 8 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte1___width 8 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte2___lsb 16 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte2___width 8 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte3___lsb 24 +#define reg_iop_sw_mpu_rw_bus_set_mask___byte3___width 8 +#define reg_iop_sw_mpu_rw_bus_set_mask_offset 40 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_mpu_rw_bus_oe_clr_mask_offset 44 + +/* Register rw_bus_oe_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte0___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte1___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte2___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte3___width 1 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_mpu_rw_bus_oe_set_mask_offset 48 + +/* Register r_bus_in, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_bus_in_offset 52 + +/* Register rw_gio_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_clr_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_clr_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_clr_mask_offset 56 + +/* Register rw_gio_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_set_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_set_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_set_mask_offset 60 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_oe_clr_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_oe_clr_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_oe_clr_mask_offset 64 + +/* Register rw_gio_oe_set_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_gio_oe_set_mask___val___lsb 0 +#define reg_iop_sw_mpu_rw_gio_oe_set_mask___val___width 32 +#define reg_iop_sw_mpu_rw_gio_oe_set_mask_offset 68 + +/* Register r_gio_in, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_gio_in_offset 72 + +/* Register rw_cpu_intr, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_mpu_rw_cpu_intr___intr0___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr0___bit 0 +#define reg_iop_sw_mpu_rw_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr1___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr1___bit 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_mpu_rw_cpu_intr___intr2___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr2___bit 2 +#define reg_iop_sw_mpu_rw_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_mpu_rw_cpu_intr___intr3___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr3___bit 3 +#define reg_iop_sw_mpu_rw_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_mpu_rw_cpu_intr___intr4___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr4___bit 4 +#define reg_iop_sw_mpu_rw_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_mpu_rw_cpu_intr___intr5___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr5___bit 5 +#define reg_iop_sw_mpu_rw_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_mpu_rw_cpu_intr___intr6___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr6___bit 6 +#define reg_iop_sw_mpu_rw_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_mpu_rw_cpu_intr___intr7___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr7___bit 7 +#define reg_iop_sw_mpu_rw_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_mpu_rw_cpu_intr___intr8___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr8___bit 8 +#define reg_iop_sw_mpu_rw_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_mpu_rw_cpu_intr___intr9___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr9___bit 9 +#define reg_iop_sw_mpu_rw_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_mpu_rw_cpu_intr___intr10___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr10___bit 10 +#define reg_iop_sw_mpu_rw_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_mpu_rw_cpu_intr___intr11___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr11___bit 11 +#define reg_iop_sw_mpu_rw_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_mpu_rw_cpu_intr___intr12___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr12___bit 12 +#define reg_iop_sw_mpu_rw_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_mpu_rw_cpu_intr___intr13___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr13___bit 13 +#define reg_iop_sw_mpu_rw_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_mpu_rw_cpu_intr___intr14___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr14___bit 14 +#define reg_iop_sw_mpu_rw_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_mpu_rw_cpu_intr___intr15___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr15___bit 15 +#define reg_iop_sw_mpu_rw_cpu_intr___intr16___lsb 16 +#define reg_iop_sw_mpu_rw_cpu_intr___intr16___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr16___bit 16 +#define reg_iop_sw_mpu_rw_cpu_intr___intr17___lsb 17 +#define reg_iop_sw_mpu_rw_cpu_intr___intr17___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr17___bit 17 +#define reg_iop_sw_mpu_rw_cpu_intr___intr18___lsb 18 +#define reg_iop_sw_mpu_rw_cpu_intr___intr18___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr18___bit 18 +#define reg_iop_sw_mpu_rw_cpu_intr___intr19___lsb 19 +#define reg_iop_sw_mpu_rw_cpu_intr___intr19___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr19___bit 19 +#define reg_iop_sw_mpu_rw_cpu_intr___intr20___lsb 20 +#define reg_iop_sw_mpu_rw_cpu_intr___intr20___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr20___bit 20 +#define reg_iop_sw_mpu_rw_cpu_intr___intr21___lsb 21 +#define reg_iop_sw_mpu_rw_cpu_intr___intr21___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr21___bit 21 +#define reg_iop_sw_mpu_rw_cpu_intr___intr22___lsb 22 +#define reg_iop_sw_mpu_rw_cpu_intr___intr22___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr22___bit 22 +#define reg_iop_sw_mpu_rw_cpu_intr___intr23___lsb 23 +#define reg_iop_sw_mpu_rw_cpu_intr___intr23___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr23___bit 23 +#define reg_iop_sw_mpu_rw_cpu_intr___intr24___lsb 24 +#define reg_iop_sw_mpu_rw_cpu_intr___intr24___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr24___bit 24 +#define reg_iop_sw_mpu_rw_cpu_intr___intr25___lsb 25 +#define reg_iop_sw_mpu_rw_cpu_intr___intr25___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr25___bit 25 +#define reg_iop_sw_mpu_rw_cpu_intr___intr26___lsb 26 +#define reg_iop_sw_mpu_rw_cpu_intr___intr26___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr26___bit 26 +#define reg_iop_sw_mpu_rw_cpu_intr___intr27___lsb 27 +#define reg_iop_sw_mpu_rw_cpu_intr___intr27___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr27___bit 27 +#define reg_iop_sw_mpu_rw_cpu_intr___intr28___lsb 28 +#define reg_iop_sw_mpu_rw_cpu_intr___intr28___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr28___bit 28 +#define reg_iop_sw_mpu_rw_cpu_intr___intr29___lsb 29 +#define reg_iop_sw_mpu_rw_cpu_intr___intr29___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr29___bit 29 +#define reg_iop_sw_mpu_rw_cpu_intr___intr30___lsb 30 +#define reg_iop_sw_mpu_rw_cpu_intr___intr30___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr30___bit 30 +#define reg_iop_sw_mpu_rw_cpu_intr___intr31___lsb 31 +#define reg_iop_sw_mpu_rw_cpu_intr___intr31___width 1 +#define reg_iop_sw_mpu_rw_cpu_intr___intr31___bit 31 +#define reg_iop_sw_mpu_rw_cpu_intr_offset 76 + +/* Register r_cpu_intr, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_mpu_r_cpu_intr___intr0___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr0___bit 0 +#define reg_iop_sw_mpu_r_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr1___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr1___bit 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_mpu_r_cpu_intr___intr2___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr2___bit 2 +#define reg_iop_sw_mpu_r_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_mpu_r_cpu_intr___intr3___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr3___bit 3 +#define reg_iop_sw_mpu_r_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_mpu_r_cpu_intr___intr4___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr4___bit 4 +#define reg_iop_sw_mpu_r_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_mpu_r_cpu_intr___intr5___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr5___bit 5 +#define reg_iop_sw_mpu_r_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_mpu_r_cpu_intr___intr6___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr6___bit 6 +#define reg_iop_sw_mpu_r_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_mpu_r_cpu_intr___intr7___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr7___bit 7 +#define reg_iop_sw_mpu_r_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_mpu_r_cpu_intr___intr8___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr8___bit 8 +#define reg_iop_sw_mpu_r_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_mpu_r_cpu_intr___intr9___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr9___bit 9 +#define reg_iop_sw_mpu_r_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_mpu_r_cpu_intr___intr10___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr10___bit 10 +#define reg_iop_sw_mpu_r_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_mpu_r_cpu_intr___intr11___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr11___bit 11 +#define reg_iop_sw_mpu_r_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_mpu_r_cpu_intr___intr12___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr12___bit 12 +#define reg_iop_sw_mpu_r_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_mpu_r_cpu_intr___intr13___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr13___bit 13 +#define reg_iop_sw_mpu_r_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_mpu_r_cpu_intr___intr14___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr14___bit 14 +#define reg_iop_sw_mpu_r_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_mpu_r_cpu_intr___intr15___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr15___bit 15 +#define reg_iop_sw_mpu_r_cpu_intr___intr16___lsb 16 +#define reg_iop_sw_mpu_r_cpu_intr___intr16___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr16___bit 16 +#define reg_iop_sw_mpu_r_cpu_intr___intr17___lsb 17 +#define reg_iop_sw_mpu_r_cpu_intr___intr17___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr17___bit 17 +#define reg_iop_sw_mpu_r_cpu_intr___intr18___lsb 18 +#define reg_iop_sw_mpu_r_cpu_intr___intr18___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr18___bit 18 +#define reg_iop_sw_mpu_r_cpu_intr___intr19___lsb 19 +#define reg_iop_sw_mpu_r_cpu_intr___intr19___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr19___bit 19 +#define reg_iop_sw_mpu_r_cpu_intr___intr20___lsb 20 +#define reg_iop_sw_mpu_r_cpu_intr___intr20___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr20___bit 20 +#define reg_iop_sw_mpu_r_cpu_intr___intr21___lsb 21 +#define reg_iop_sw_mpu_r_cpu_intr___intr21___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr21___bit 21 +#define reg_iop_sw_mpu_r_cpu_intr___intr22___lsb 22 +#define reg_iop_sw_mpu_r_cpu_intr___intr22___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr22___bit 22 +#define reg_iop_sw_mpu_r_cpu_intr___intr23___lsb 23 +#define reg_iop_sw_mpu_r_cpu_intr___intr23___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr23___bit 23 +#define reg_iop_sw_mpu_r_cpu_intr___intr24___lsb 24 +#define reg_iop_sw_mpu_r_cpu_intr___intr24___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr24___bit 24 +#define reg_iop_sw_mpu_r_cpu_intr___intr25___lsb 25 +#define reg_iop_sw_mpu_r_cpu_intr___intr25___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr25___bit 25 +#define reg_iop_sw_mpu_r_cpu_intr___intr26___lsb 26 +#define reg_iop_sw_mpu_r_cpu_intr___intr26___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr26___bit 26 +#define reg_iop_sw_mpu_r_cpu_intr___intr27___lsb 27 +#define reg_iop_sw_mpu_r_cpu_intr___intr27___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr27___bit 27 +#define reg_iop_sw_mpu_r_cpu_intr___intr28___lsb 28 +#define reg_iop_sw_mpu_r_cpu_intr___intr28___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr28___bit 28 +#define reg_iop_sw_mpu_r_cpu_intr___intr29___lsb 29 +#define reg_iop_sw_mpu_r_cpu_intr___intr29___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr29___bit 29 +#define reg_iop_sw_mpu_r_cpu_intr___intr30___lsb 30 +#define reg_iop_sw_mpu_r_cpu_intr___intr30___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr30___bit 30 +#define reg_iop_sw_mpu_r_cpu_intr___intr31___lsb 31 +#define reg_iop_sw_mpu_r_cpu_intr___intr31___width 1 +#define reg_iop_sw_mpu_r_cpu_intr___intr31___bit 31 +#define reg_iop_sw_mpu_r_cpu_intr_offset 80 + +/* Register rw_intr_grp0_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr0___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr0___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr1___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr1___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr2___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr2___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr3___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr3___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp0_mask_offset 84 + +/* Register rw_ack_intr_grp0, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr0___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr0___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr0___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr1___lsb 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr1___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr1___bit 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr2___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr2___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr2___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr3___lsb 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr3___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr3___bit 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp0_offset 88 + +/* Register r_intr_grp0, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr0___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr0___bit 0 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___bit 2 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out___bit 3 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr1___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr1___bit 4 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___bit 6 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in___bit 7 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr2___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr2___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr2___bit 8 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_out___bit 11 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr3___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr3___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___spu_intr3___bit 12 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp0___dmc_in___bit 15 +#define reg_iop_sw_mpu_r_intr_grp0_offset 92 + +/* Register r_masked_intr_grp0, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr0___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr0___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr1___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr1___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr2___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr2___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr3___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr3___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp0_offset 96 + +/* Register rw_intr_grp1_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr4___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr4___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr5___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr5___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr6___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr6___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr7___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr7___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp1_mask_offset 100 + +/* Register rw_ack_intr_grp1, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr4___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr4___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr4___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr5___lsb 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr5___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr5___bit 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr6___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr6___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr6___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr7___lsb 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr7___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr7___bit 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp1_offset 104 + +/* Register r_intr_grp1, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr4___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr4___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr4___bit 0 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_out___bit 3 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr5___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr5___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr5___bit 4 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___dmc_in___bit 7 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr6___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr6___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr6___bit 8 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___bit 10 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_out___bit 11 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr7___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr7___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___spu_intr7___bit 12 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___bit 14 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp1___fifo_in___bit 15 +#define reg_iop_sw_mpu_r_intr_grp1_offset 108 + +/* Register r_masked_intr_grp1, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr4___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr4___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr5___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr5___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr6___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr6___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr7___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr7___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp1_offset 112 + +/* Register rw_intr_grp2_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr8___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr8___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr8___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr9___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr9___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr9___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr10___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr10___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr10___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr11___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr11___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr11___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp2_mask_offset 116 + +/* Register rw_ack_intr_grp2, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr8___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr8___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr8___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr9___lsb 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr9___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr9___bit 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr10___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr10___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr10___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr11___lsb 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr11___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr11___bit 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp2_offset 120 + +/* Register r_intr_grp2, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr8___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr8___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr8___bit 0 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___bit 2 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out___bit 3 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr9___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr9___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr9___bit 4 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___bit 6 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in___bit 7 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr10___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr10___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr10___bit 8 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_out___bit 11 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr11___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr11___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___spu_intr11___bit 12 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp2___dmc_in___bit 15 +#define reg_iop_sw_mpu_r_intr_grp2_offset 124 + +/* Register r_masked_intr_grp2, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr8___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr8___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr8___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr9___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr9___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr9___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr10___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr10___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr10___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out_extra___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out_extra___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr11___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr11___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr11___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in_extra___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in_extra___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp2_offset 128 + +/* Register rw_intr_grp3_mask, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr12___lsb 0 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr12___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr12___bit 0 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out___lsb 3 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out___bit 3 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr13___lsb 4 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr13___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr13___bit 4 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in___lsb 7 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in___bit 7 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr14___lsb 8 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr14___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr14___bit 8 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___bit 10 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out___lsb 11 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out___bit 11 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr15___lsb 12 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr15___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr15___bit 12 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___bit 14 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in___lsb 15 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in___width 1 +#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in___bit 15 +#define reg_iop_sw_mpu_rw_intr_grp3_mask_offset 132 + +/* Register rw_ack_intr_grp3, scope iop_sw_mpu, type rw */ +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr12___lsb 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr12___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr12___bit 0 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr13___lsb 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr13___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr13___bit 4 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr14___lsb 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr14___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr14___bit 8 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr15___lsb 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr15___width 1 +#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr15___bit 12 +#define reg_iop_sw_mpu_rw_ack_intr_grp3_offset 136 + +/* Register r_intr_grp3, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr12___lsb 0 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr12___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr12___bit 0 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out___lsb 3 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_out___bit 3 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr13___lsb 4 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr13___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr13___bit 4 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in___lsb 7 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___dmc_in___bit 7 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr14___lsb 8 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr14___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr14___bit 8 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___bit 10 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out___lsb 11 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_out___bit 11 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr15___lsb 12 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr15___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___spu_intr15___bit 12 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___bit 14 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in___lsb 15 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in___width 1 +#define reg_iop_sw_mpu_r_intr_grp3___fifo_in___bit 15 +#define reg_iop_sw_mpu_r_intr_grp3_offset 140 + +/* Register r_masked_intr_grp3, scope iop_sw_mpu, type r */ +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr12___lsb 0 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr12___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr12___bit 0 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___lsb 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___bit 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out_extra___lsb 2 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out_extra___bit 2 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out___lsb 3 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out___bit 3 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr13___lsb 4 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr13___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr13___bit 4 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___lsb 5 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___bit 5 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in_extra___lsb 6 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in_extra___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in_extra___bit 6 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in___lsb 7 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in___bit 7 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr14___lsb 8 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr14___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr14___bit 8 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___lsb 9 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___bit 9 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___lsb 10 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___bit 10 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out___lsb 11 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out___bit 11 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr15___lsb 12 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr15___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr15___bit 12 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___lsb 13 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___bit 13 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___lsb 14 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___bit 14 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in___lsb 15 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in___width 1 +#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in___bit 15 +#define reg_iop_sw_mpu_r_masked_intr_grp3_offset 144 + + +/* Constants */ +#define regk_iop_sw_mpu_copy 0x00000000 +#define regk_iop_sw_mpu_cpu 0x00000000 +#define regk_iop_sw_mpu_mpu 0x00000001 +#define regk_iop_sw_mpu_no 0x00000000 +#define regk_iop_sw_mpu_nop 0x00000000 +#define regk_iop_sw_mpu_rd 0x00000002 +#define regk_iop_sw_mpu_reg_copy 0x00000001 +#define regk_iop_sw_mpu_rw_bus_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus_oe_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_bus_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_oe_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_gio_set_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp0_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp1_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp2_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_intr_grp3_mask_default 0x00000000 +#define regk_iop_sw_mpu_rw_sw_cfg_owner_default 0x00000000 +#define regk_iop_sw_mpu_set 0x00000001 +#define regk_iop_sw_mpu_spu 0x00000002 +#define regk_iop_sw_mpu_wr 0x00000003 +#define regk_iop_sw_mpu_yes 0x00000001 +#endif /* __iop_sw_mpu_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_spu_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_spu_defs_asm.h new file mode 100644 index 000000000000..67a745338087 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_sw_spu_defs_asm.h @@ -0,0 +1,523 @@ +#ifndef __iop_sw_spu_defs_asm_h +#define __iop_sw_spu_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_sw_spu.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_spu_defs_asm.h iop_sw_spu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_mpu_trace, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mpu_trace_offset 0 + +/* Register rw_mc_ctrl, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___lsb 0 +#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___width 1 +#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___bit 0 +#define reg_iop_sw_spu_rw_mc_ctrl___cmd___lsb 1 +#define reg_iop_sw_spu_rw_mc_ctrl___cmd___width 2 +#define reg_iop_sw_spu_rw_mc_ctrl___size___lsb 3 +#define reg_iop_sw_spu_rw_mc_ctrl___size___width 3 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu_mem___lsb 6 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu_mem___width 1 +#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu_mem___bit 6 +#define reg_iop_sw_spu_rw_mc_ctrl_offset 4 + +/* Register rw_mc_data, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mc_data___val___lsb 0 +#define reg_iop_sw_spu_rw_mc_data___val___width 32 +#define reg_iop_sw_spu_rw_mc_data_offset 8 + +/* Register rw_mc_addr, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mc_addr_offset 12 + +/* Register rs_mc_data, scope iop_sw_spu, type rs */ +#define reg_iop_sw_spu_rs_mc_data_offset 16 + +/* Register r_mc_data, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mc_data_offset 20 + +/* Register r_mc_stat, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mc_stat___busy_cpu___lsb 0 +#define reg_iop_sw_spu_r_mc_stat___busy_cpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___busy_cpu___bit 0 +#define reg_iop_sw_spu_r_mc_stat___busy_mpu___lsb 1 +#define reg_iop_sw_spu_r_mc_stat___busy_mpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___busy_mpu___bit 1 +#define reg_iop_sw_spu_r_mc_stat___busy_spu___lsb 2 +#define reg_iop_sw_spu_r_mc_stat___busy_spu___width 1 +#define reg_iop_sw_spu_r_mc_stat___busy_spu___bit 2 +#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___lsb 3 +#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___bit 3 +#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___lsb 4 +#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___width 1 +#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___bit 4 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu___lsb 5 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu___width 1 +#define reg_iop_sw_spu_r_mc_stat___owned_by_spu___bit 5 +#define reg_iop_sw_spu_r_mc_stat_offset 24 + +/* Register rw_bus_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_clr_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte0___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte1___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte2___lsb 16 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte2___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte3___lsb 24 +#define reg_iop_sw_spu_rw_bus_clr_mask___byte3___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_offset 28 + +/* Register rw_bus_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_set_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_set_mask___byte0___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus_set_mask___byte1___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask___byte2___lsb 16 +#define reg_iop_sw_spu_rw_bus_set_mask___byte2___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask___byte3___lsb 24 +#define reg_iop_sw_spu_rw_bus_set_mask___byte3___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask_offset 32 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte0___width 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte0___bit 0 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte1___lsb 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte1___width 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte1___bit 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte2___lsb 2 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte2___width 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte2___bit 2 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte3___lsb 3 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte3___width 1 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte3___bit 3 +#define reg_iop_sw_spu_rw_bus_oe_clr_mask_offset 36 + +/* Register rw_bus_oe_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte0___width 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte0___bit 0 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte1___lsb 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte1___width 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte1___bit 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte2___lsb 2 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte2___width 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte2___bit 2 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte3___lsb 3 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte3___width 1 +#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte3___bit 3 +#define reg_iop_sw_spu_rw_bus_oe_set_mask_offset 40 + +/* Register r_bus_in, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_bus_in_offset 44 + +/* Register rw_gio_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_clr_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_clr_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_clr_mask_offset 48 + +/* Register rw_gio_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_set_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_set_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_set_mask_offset 52 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_clr_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_offset 56 + +/* Register rw_gio_oe_set_mask, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_set_mask___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_set_mask___val___width 32 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_offset 60 + +/* Register r_gio_in, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_gio_in_offset 64 + +/* Register rw_bus_clr_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte0___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte1___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_lo_offset 68 + +/* Register rw_bus_clr_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte2___lsb 0 +#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte2___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte3___lsb 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte3___width 8 +#define reg_iop_sw_spu_rw_bus_clr_mask_hi_offset 72 + +/* Register rw_bus_set_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte0___lsb 0 +#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte0___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte1___lsb 8 +#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte1___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask_lo_offset 76 + +/* Register rw_bus_set_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte2___lsb 0 +#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte2___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte3___lsb 8 +#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte3___width 8 +#define reg_iop_sw_spu_rw_bus_set_mask_hi_offset 80 + +/* Register rw_gio_clr_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_clr_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_clr_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_clr_mask_lo_offset 84 + +/* Register rw_gio_clr_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_clr_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_clr_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_clr_mask_hi_offset 88 + +/* Register rw_gio_set_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_set_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_set_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_set_mask_lo_offset 92 + +/* Register rw_gio_set_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_set_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_set_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_set_mask_hi_offset 96 + +/* Register rw_gio_oe_clr_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo_offset 100 + +/* Register rw_gio_oe_clr_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi_offset 104 + +/* Register rw_gio_oe_set_mask_lo, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo_offset 108 + +/* Register rw_gio_oe_set_mask_hi, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi___val___lsb 0 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi___val___width 16 +#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi_offset 112 + +/* Register rw_cpu_intr, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_rw_cpu_intr___intr0___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_rw_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr1___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_rw_cpu_intr___intr2___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_rw_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_rw_cpu_intr___intr3___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_rw_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_rw_cpu_intr___intr4___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_rw_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_rw_cpu_intr___intr5___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_rw_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_rw_cpu_intr___intr6___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_rw_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_rw_cpu_intr___intr7___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_rw_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_rw_cpu_intr___intr8___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_rw_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_rw_cpu_intr___intr9___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_rw_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_rw_cpu_intr___intr10___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_rw_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_rw_cpu_intr___intr11___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_rw_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_rw_cpu_intr___intr12___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_rw_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_rw_cpu_intr___intr13___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_rw_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_rw_cpu_intr___intr14___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_rw_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_rw_cpu_intr___intr15___width 1 +#define reg_iop_sw_spu_rw_cpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_rw_cpu_intr_offset 116 + +/* Register r_cpu_intr, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_cpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_r_cpu_intr___intr0___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_r_cpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_r_cpu_intr___intr1___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_r_cpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_r_cpu_intr___intr2___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_r_cpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_r_cpu_intr___intr3___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_r_cpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_r_cpu_intr___intr4___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_r_cpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_r_cpu_intr___intr5___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_r_cpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_r_cpu_intr___intr6___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_r_cpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_r_cpu_intr___intr7___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_r_cpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_r_cpu_intr___intr8___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_r_cpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_r_cpu_intr___intr9___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_r_cpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_r_cpu_intr___intr10___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_r_cpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_r_cpu_intr___intr11___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_r_cpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_r_cpu_intr___intr12___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_r_cpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_r_cpu_intr___intr13___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_r_cpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_r_cpu_intr___intr14___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_r_cpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_r_cpu_intr___intr15___width 1 +#define reg_iop_sw_spu_r_cpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_r_cpu_intr_offset 120 + +/* Register r_hw_intr, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___lsb 0 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___bit 0 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___lsb 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___bit 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___lsb 2 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___bit 2 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___lsb 3 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___bit 3 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___lsb 4 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___bit 4 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___lsb 5 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___bit 5 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___lsb 6 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___bit 6 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___lsb 7 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___width 1 +#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___bit 7 +#define reg_iop_sw_spu_r_hw_intr___timer_grp0___lsb 8 +#define reg_iop_sw_spu_r_hw_intr___timer_grp0___width 1 +#define reg_iop_sw_spu_r_hw_intr___timer_grp0___bit 8 +#define reg_iop_sw_spu_r_hw_intr___timer_grp1___lsb 9 +#define reg_iop_sw_spu_r_hw_intr___timer_grp1___width 1 +#define reg_iop_sw_spu_r_hw_intr___timer_grp1___bit 9 +#define reg_iop_sw_spu_r_hw_intr___fifo_out___lsb 10 +#define reg_iop_sw_spu_r_hw_intr___fifo_out___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_out___bit 10 +#define reg_iop_sw_spu_r_hw_intr___fifo_out_extra___lsb 11 +#define reg_iop_sw_spu_r_hw_intr___fifo_out_extra___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_out_extra___bit 11 +#define reg_iop_sw_spu_r_hw_intr___fifo_in___lsb 12 +#define reg_iop_sw_spu_r_hw_intr___fifo_in___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_in___bit 12 +#define reg_iop_sw_spu_r_hw_intr___fifo_in_extra___lsb 13 +#define reg_iop_sw_spu_r_hw_intr___fifo_in_extra___width 1 +#define reg_iop_sw_spu_r_hw_intr___fifo_in_extra___bit 13 +#define reg_iop_sw_spu_r_hw_intr___dmc_out___lsb 14 +#define reg_iop_sw_spu_r_hw_intr___dmc_out___width 1 +#define reg_iop_sw_spu_r_hw_intr___dmc_out___bit 14 +#define reg_iop_sw_spu_r_hw_intr___dmc_in___lsb 15 +#define reg_iop_sw_spu_r_hw_intr___dmc_in___width 1 +#define reg_iop_sw_spu_r_hw_intr___dmc_in___bit 15 +#define reg_iop_sw_spu_r_hw_intr_offset 124 + +/* Register rw_mpu_intr, scope iop_sw_spu, type rw */ +#define reg_iop_sw_spu_rw_mpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_rw_mpu_intr___intr0___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_rw_mpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr1___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_rw_mpu_intr___intr2___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_rw_mpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_rw_mpu_intr___intr3___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_rw_mpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_rw_mpu_intr___intr4___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_rw_mpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_rw_mpu_intr___intr5___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_rw_mpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_rw_mpu_intr___intr6___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_rw_mpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_rw_mpu_intr___intr7___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_rw_mpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_rw_mpu_intr___intr8___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_rw_mpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_rw_mpu_intr___intr9___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_rw_mpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_rw_mpu_intr___intr10___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_rw_mpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_rw_mpu_intr___intr11___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_rw_mpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_rw_mpu_intr___intr12___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_rw_mpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_rw_mpu_intr___intr13___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_rw_mpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_rw_mpu_intr___intr14___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_rw_mpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_rw_mpu_intr___intr15___width 1 +#define reg_iop_sw_spu_rw_mpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_rw_mpu_intr_offset 128 + +/* Register r_mpu_intr, scope iop_sw_spu, type r */ +#define reg_iop_sw_spu_r_mpu_intr___intr0___lsb 0 +#define reg_iop_sw_spu_r_mpu_intr___intr0___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr0___bit 0 +#define reg_iop_sw_spu_r_mpu_intr___intr1___lsb 1 +#define reg_iop_sw_spu_r_mpu_intr___intr1___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr1___bit 1 +#define reg_iop_sw_spu_r_mpu_intr___intr2___lsb 2 +#define reg_iop_sw_spu_r_mpu_intr___intr2___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr2___bit 2 +#define reg_iop_sw_spu_r_mpu_intr___intr3___lsb 3 +#define reg_iop_sw_spu_r_mpu_intr___intr3___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr3___bit 3 +#define reg_iop_sw_spu_r_mpu_intr___intr4___lsb 4 +#define reg_iop_sw_spu_r_mpu_intr___intr4___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr4___bit 4 +#define reg_iop_sw_spu_r_mpu_intr___intr5___lsb 5 +#define reg_iop_sw_spu_r_mpu_intr___intr5___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr5___bit 5 +#define reg_iop_sw_spu_r_mpu_intr___intr6___lsb 6 +#define reg_iop_sw_spu_r_mpu_intr___intr6___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr6___bit 6 +#define reg_iop_sw_spu_r_mpu_intr___intr7___lsb 7 +#define reg_iop_sw_spu_r_mpu_intr___intr7___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr7___bit 7 +#define reg_iop_sw_spu_r_mpu_intr___intr8___lsb 8 +#define reg_iop_sw_spu_r_mpu_intr___intr8___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr8___bit 8 +#define reg_iop_sw_spu_r_mpu_intr___intr9___lsb 9 +#define reg_iop_sw_spu_r_mpu_intr___intr9___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr9___bit 9 +#define reg_iop_sw_spu_r_mpu_intr___intr10___lsb 10 +#define reg_iop_sw_spu_r_mpu_intr___intr10___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr10___bit 10 +#define reg_iop_sw_spu_r_mpu_intr___intr11___lsb 11 +#define reg_iop_sw_spu_r_mpu_intr___intr11___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr11___bit 11 +#define reg_iop_sw_spu_r_mpu_intr___intr12___lsb 12 +#define reg_iop_sw_spu_r_mpu_intr___intr12___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr12___bit 12 +#define reg_iop_sw_spu_r_mpu_intr___intr13___lsb 13 +#define reg_iop_sw_spu_r_mpu_intr___intr13___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr13___bit 13 +#define reg_iop_sw_spu_r_mpu_intr___intr14___lsb 14 +#define reg_iop_sw_spu_r_mpu_intr___intr14___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr14___bit 14 +#define reg_iop_sw_spu_r_mpu_intr___intr15___lsb 15 +#define reg_iop_sw_spu_r_mpu_intr___intr15___width 1 +#define reg_iop_sw_spu_r_mpu_intr___intr15___bit 15 +#define reg_iop_sw_spu_r_mpu_intr_offset 132 + + +/* Constants */ +#define regk_iop_sw_spu_copy 0x00000000 +#define regk_iop_sw_spu_no 0x00000000 +#define regk_iop_sw_spu_nop 0x00000000 +#define regk_iop_sw_spu_rd 0x00000002 +#define regk_iop_sw_spu_reg_copy 0x00000001 +#define regk_iop_sw_spu_rw_bus_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus_oe_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_bus_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_oe_clr_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_oe_set_mask_default 0x00000000 +#define regk_iop_sw_spu_rw_gio_set_mask_default 0x00000000 +#define regk_iop_sw_spu_set 0x00000001 +#define regk_iop_sw_spu_wr 0x00000003 +#define regk_iop_sw_spu_yes 0x00000001 +#endif /* __iop_sw_spu_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_version_defs_asm.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_version_defs_asm.h new file mode 100644 index 000000000000..4ad671202af0 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/asm/iop_version_defs_asm.h @@ -0,0 +1,61 @@ +#ifndef __iop_version_defs_asm_h +#define __iop_version_defs_asm_h + +/* + * This file is autogenerated from + * file: iop_version.r + * + * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_version_defs_asm.h iop_version.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_version, scope iop_version, type r */ +#define reg_iop_version_r_version___nr___lsb 0 +#define reg_iop_version_r_version___nr___width 8 +#define reg_iop_version_r_version_offset 0 + + +/* Constants */ +#define regk_iop_version_v2_0 0x00000002 +#endif /* __iop_version_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_reg_space.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_reg_space.h new file mode 100644 index 000000000000..af3196c60a46 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_reg_space.h @@ -0,0 +1,31 @@ +/* Autogenerated Changes here will be lost! + * generated by ./gen_sw.pl Wed Feb 14 09:27:48 2007 iop_sw.cfg + */ +#define regi_iop_version (regi_iop + 0) +#define regi_iop_fifo_in_extra (regi_iop + 64) +#define regi_iop_fifo_out_extra (regi_iop + 128) +#define regi_iop_trigger_grp0 (regi_iop + 192) +#define regi_iop_trigger_grp1 (regi_iop + 256) +#define regi_iop_trigger_grp2 (regi_iop + 320) +#define regi_iop_trigger_grp3 (regi_iop + 384) +#define regi_iop_trigger_grp4 (regi_iop + 448) +#define regi_iop_trigger_grp5 (regi_iop + 512) +#define regi_iop_trigger_grp6 (regi_iop + 576) +#define regi_iop_trigger_grp7 (regi_iop + 640) +#define regi_iop_crc_par (regi_iop + 768) +#define regi_iop_dmc_in (regi_iop + 896) +#define regi_iop_dmc_out (regi_iop + 1024) +#define regi_iop_fifo_in (regi_iop + 1152) +#define regi_iop_fifo_out (regi_iop + 1280) +#define regi_iop_scrc_in (regi_iop + 1408) +#define regi_iop_scrc_out (regi_iop + 1536) +#define regi_iop_timer_grp0 (regi_iop + 1664) +#define regi_iop_timer_grp1 (regi_iop + 1792) +#define regi_iop_sap_in (regi_iop + 2048) +#define regi_iop_sap_out (regi_iop + 2304) +#define regi_iop_spu (regi_iop + 2560) +#define regi_iop_sw_cfg (regi_iop + 2816) +#define regi_iop_sw_cpu (regi_iop + 3072) +#define regi_iop_sw_mpu (regi_iop + 3328) +#define regi_iop_sw_spu (regi_iop + 3584) +#define regi_iop_mpu (regi_iop + 4096) diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sap_in_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sap_in_defs.h new file mode 100644 index 000000000000..51dde016c03a --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sap_in_defs.h @@ -0,0 +1,141 @@ +#ifndef __iop_sap_in_defs_h +#define __iop_sap_in_defs_h + +/* + * This file is autogenerated from + * file: iop_sap_in.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sap_in_defs.h iop_sap_in.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sap_in */ + +#define STRIDE_iop_sap_in_rw_bus_byte 4 +/* Register rw_bus_byte, scope iop_sap_in, type rw */ +typedef struct { + unsigned int sync_sel : 2; + unsigned int sync_ext_src : 3; + unsigned int sync_edge : 2; + unsigned int delay : 2; + unsigned int dummy1 : 23; +} reg_iop_sap_in_rw_bus_byte; +#define REG_RD_ADDR_iop_sap_in_rw_bus_byte 0 +#define REG_WR_ADDR_iop_sap_in_rw_bus_byte 0 + +#define STRIDE_iop_sap_in_rw_gio 4 +/* Register rw_gio, scope iop_sap_in, type rw */ +typedef struct { + unsigned int sync_sel : 2; + unsigned int sync_ext_src : 3; + unsigned int sync_edge : 2; + unsigned int delay : 2; + unsigned int logic : 2; + unsigned int dummy1 : 21; +} reg_iop_sap_in_rw_gio; +#define REG_RD_ADDR_iop_sap_in_rw_gio 16 +#define REG_WR_ADDR_iop_sap_in_rw_gio 16 + + +/* Constants */ +enum { + regk_iop_sap_in_and = 0x00000002, + regk_iop_sap_in_ext_clk200 = 0x00000003, + regk_iop_sap_in_gio0 = 0x00000000, + regk_iop_sap_in_gio12 = 0x00000003, + regk_iop_sap_in_gio16 = 0x00000004, + regk_iop_sap_in_gio20 = 0x00000005, + regk_iop_sap_in_gio24 = 0x00000006, + regk_iop_sap_in_gio28 = 0x00000007, + regk_iop_sap_in_gio4 = 0x00000001, + regk_iop_sap_in_gio8 = 0x00000002, + regk_iop_sap_in_inv = 0x00000001, + regk_iop_sap_in_neg = 0x00000002, + regk_iop_sap_in_no = 0x00000000, + regk_iop_sap_in_no_del_ext_clk200 = 0x00000002, + regk_iop_sap_in_none = 0x00000000, + regk_iop_sap_in_one = 0x00000001, + regk_iop_sap_in_or = 0x00000003, + regk_iop_sap_in_pos = 0x00000001, + regk_iop_sap_in_pos_neg = 0x00000003, + regk_iop_sap_in_rw_bus_byte_default = 0x00000000, + regk_iop_sap_in_rw_bus_byte_size = 0x00000004, + regk_iop_sap_in_rw_gio_default = 0x00000000, + regk_iop_sap_in_rw_gio_size = 0x00000020, + regk_iop_sap_in_timer_grp0_tmr3 = 0x00000000, + regk_iop_sap_in_timer_grp1_tmr3 = 0x00000001, + regk_iop_sap_in_tmr_clk200 = 0x00000001, + regk_iop_sap_in_two = 0x00000002, + regk_iop_sap_in_two_clk200 = 0x00000000 +}; +#endif /* __iop_sap_in_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sap_out_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sap_out_defs.h new file mode 100644 index 000000000000..5af88baa2ac1 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sap_out_defs.h @@ -0,0 +1,231 @@ +#ifndef __iop_sap_out_defs_h +#define __iop_sap_out_defs_h + +/* + * This file is autogenerated from + * file: iop_sap_out.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sap_out_defs.h iop_sap_out.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sap_out */ + +/* Register rw_gen_gated, scope iop_sap_out, type rw */ +typedef struct { + unsigned int clk0_src : 2; + unsigned int clk0_gate_src : 2; + unsigned int clk0_force_src : 3; + unsigned int clk1_src : 2; + unsigned int clk1_gate_src : 2; + unsigned int clk1_force_src : 3; + unsigned int dummy1 : 18; +} reg_iop_sap_out_rw_gen_gated; +#define REG_RD_ADDR_iop_sap_out_rw_gen_gated 0 +#define REG_WR_ADDR_iop_sap_out_rw_gen_gated 0 + +/* Register rw_bus, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte0_clk_sel : 2; + unsigned int byte0_clk_ext : 2; + unsigned int byte0_gated_clk : 1; + unsigned int byte0_clk_inv : 1; + unsigned int byte0_delay : 1; + unsigned int byte1_clk_sel : 2; + unsigned int byte1_clk_ext : 2; + unsigned int byte1_gated_clk : 1; + unsigned int byte1_clk_inv : 1; + unsigned int byte1_delay : 1; + unsigned int byte2_clk_sel : 2; + unsigned int byte2_clk_ext : 2; + unsigned int byte2_gated_clk : 1; + unsigned int byte2_clk_inv : 1; + unsigned int byte2_delay : 1; + unsigned int byte3_clk_sel : 2; + unsigned int byte3_clk_ext : 2; + unsigned int byte3_gated_clk : 1; + unsigned int byte3_clk_inv : 1; + unsigned int byte3_delay : 1; + unsigned int dummy1 : 4; +} reg_iop_sap_out_rw_bus; +#define REG_RD_ADDR_iop_sap_out_rw_bus 4 +#define REG_WR_ADDR_iop_sap_out_rw_bus 4 + +/* Register rw_bus_lo_oe, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte0_clk_sel : 2; + unsigned int byte0_clk_ext : 2; + unsigned int byte0_gated_clk : 1; + unsigned int byte0_clk_inv : 1; + unsigned int byte0_delay : 1; + unsigned int byte0_logic : 2; + unsigned int byte0_logic_src : 2; + unsigned int byte1_clk_sel : 2; + unsigned int byte1_clk_ext : 2; + unsigned int byte1_gated_clk : 1; + unsigned int byte1_clk_inv : 1; + unsigned int byte1_delay : 1; + unsigned int byte1_logic : 2; + unsigned int byte1_logic_src : 2; + unsigned int dummy1 : 10; +} reg_iop_sap_out_rw_bus_lo_oe; +#define REG_RD_ADDR_iop_sap_out_rw_bus_lo_oe 8 +#define REG_WR_ADDR_iop_sap_out_rw_bus_lo_oe 8 + +/* Register rw_bus_hi_oe, scope iop_sap_out, type rw */ +typedef struct { + unsigned int byte2_clk_sel : 2; + unsigned int byte2_clk_ext : 2; + unsigned int byte2_gated_clk : 1; + unsigned int byte2_clk_inv : 1; + unsigned int byte2_delay : 1; + unsigned int byte2_logic : 2; + unsigned int byte2_logic_src : 2; + unsigned int byte3_clk_sel : 2; + unsigned int byte3_clk_ext : 2; + unsigned int byte3_gated_clk : 1; + unsigned int byte3_clk_inv : 1; + unsigned int byte3_delay : 1; + unsigned int byte3_logic : 2; + unsigned int byte3_logic_src : 2; + unsigned int dummy1 : 10; +} reg_iop_sap_out_rw_bus_hi_oe; +#define REG_RD_ADDR_iop_sap_out_rw_bus_hi_oe 12 +#define REG_WR_ADDR_iop_sap_out_rw_bus_hi_oe 12 + +#define STRIDE_iop_sap_out_rw_gio 4 +/* Register rw_gio, scope iop_sap_out, type rw */ +typedef struct { + unsigned int out_clk_sel : 3; + unsigned int out_clk_ext : 2; + unsigned int out_gated_clk : 1; + unsigned int out_clk_inv : 1; + unsigned int out_delay : 1; + unsigned int out_logic : 2; + unsigned int out_logic_src : 2; + unsigned int oe_clk_sel : 3; + unsigned int oe_clk_ext : 2; + unsigned int oe_gated_clk : 1; + unsigned int oe_clk_inv : 1; + unsigned int oe_delay : 1; + unsigned int oe_logic : 2; + unsigned int oe_logic_src : 2; + unsigned int dummy1 : 8; +} reg_iop_sap_out_rw_gio; +#define REG_RD_ADDR_iop_sap_out_rw_gio 16 +#define REG_WR_ADDR_iop_sap_out_rw_gio 16 + + +/* Constants */ +enum { + regk_iop_sap_out_always = 0x00000001, + regk_iop_sap_out_and = 0x00000002, + regk_iop_sap_out_clk0 = 0x00000000, + regk_iop_sap_out_clk1 = 0x00000001, + regk_iop_sap_out_clk12 = 0x00000004, + regk_iop_sap_out_clk200 = 0x00000000, + regk_iop_sap_out_ext = 0x00000002, + regk_iop_sap_out_gated = 0x00000003, + regk_iop_sap_out_gio0 = 0x00000000, + regk_iop_sap_out_gio1 = 0x00000000, + regk_iop_sap_out_gio16 = 0x00000002, + regk_iop_sap_out_gio17 = 0x00000002, + regk_iop_sap_out_gio24 = 0x00000003, + regk_iop_sap_out_gio25 = 0x00000003, + regk_iop_sap_out_gio8 = 0x00000001, + regk_iop_sap_out_gio9 = 0x00000001, + regk_iop_sap_out_gio_out10 = 0x00000005, + regk_iop_sap_out_gio_out18 = 0x00000006, + regk_iop_sap_out_gio_out2 = 0x00000004, + regk_iop_sap_out_gio_out26 = 0x00000007, + regk_iop_sap_out_inv = 0x00000001, + regk_iop_sap_out_nand = 0x00000003, + regk_iop_sap_out_no = 0x00000000, + regk_iop_sap_out_none = 0x00000000, + regk_iop_sap_out_one = 0x00000001, + regk_iop_sap_out_rw_bus_default = 0x00000000, + regk_iop_sap_out_rw_bus_hi_oe_default = 0x00000000, + regk_iop_sap_out_rw_bus_lo_oe_default = 0x00000000, + regk_iop_sap_out_rw_gen_gated_default = 0x00000000, + regk_iop_sap_out_rw_gio_default = 0x00000000, + regk_iop_sap_out_rw_gio_size = 0x00000020, + regk_iop_sap_out_spu_gio6 = 0x00000002, + regk_iop_sap_out_spu_gio7 = 0x00000003, + regk_iop_sap_out_timer_grp0_tmr2 = 0x00000000, + regk_iop_sap_out_timer_grp0_tmr3 = 0x00000001, + regk_iop_sap_out_timer_grp1_tmr2 = 0x00000002, + regk_iop_sap_out_timer_grp1_tmr3 = 0x00000003, + regk_iop_sap_out_tmr200 = 0x00000001, + regk_iop_sap_out_yes = 0x00000001 +}; +#endif /* __iop_sap_out_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_cfg_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_cfg_defs.h new file mode 100644 index 000000000000..98ac95275a1c --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_cfg_defs.h @@ -0,0 +1,725 @@ +#ifndef __iop_sw_cfg_defs_h +#define __iop_sw_cfg_defs_h + +/* + * This file is autogenerated from + * file: iop_sw_cfg.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_cfg_defs.h iop_sw_cfg.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_cfg */ + +/* Register rw_crc_par_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_crc_par_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_crc_par_owner 0 +#define REG_WR_ADDR_iop_sw_cfg_rw_crc_par_owner 0 + +/* Register rw_dmc_in_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_dmc_in_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_in_owner 4 +#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_in_owner 4 + +/* Register rw_dmc_out_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_dmc_out_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_out_owner 8 +#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_out_owner 8 + +/* Register rw_fifo_in_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_in_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in_owner 12 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in_owner 12 + +/* Register rw_fifo_in_extra_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_in_extra_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in_extra_owner 16 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in_extra_owner 16 + +/* Register rw_fifo_out_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_out_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out_owner 20 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out_owner 20 + +/* Register rw_fifo_out_extra_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_fifo_out_extra_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out_extra_owner 24 +#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out_extra_owner 24 + +/* Register rw_sap_in_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_sap_in_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_sap_in_owner 28 +#define REG_WR_ADDR_iop_sw_cfg_rw_sap_in_owner 28 + +/* Register rw_sap_out_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_sap_out_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_sap_out_owner 32 +#define REG_WR_ADDR_iop_sw_cfg_rw_sap_out_owner 32 + +/* Register rw_scrc_in_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_scrc_in_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_in_owner 36 +#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_in_owner 36 + +/* Register rw_scrc_out_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_scrc_out_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_out_owner 40 +#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_out_owner 40 + +/* Register rw_spu_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 1; + unsigned int dummy1 : 31; +} reg_iop_sw_cfg_rw_spu_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_spu_owner 44 +#define REG_WR_ADDR_iop_sw_cfg_rw_spu_owner 44 + +/* Register rw_timer_grp0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_timer_grp0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp0_owner 48 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp0_owner 48 + +/* Register rw_timer_grp1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_timer_grp1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp1_owner 52 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp1_owner 52 + +/* Register rw_trigger_grp0_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp0_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp0_owner 56 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp0_owner 56 + +/* Register rw_trigger_grp1_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp1_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp1_owner 60 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp1_owner 60 + +/* Register rw_trigger_grp2_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp2_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp2_owner 64 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp2_owner 64 + +/* Register rw_trigger_grp3_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp3_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp3_owner 68 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp3_owner 68 + +/* Register rw_trigger_grp4_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp4_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp4_owner 72 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp4_owner 72 + +/* Register rw_trigger_grp5_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp5_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp5_owner 76 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp5_owner 76 + +/* Register rw_trigger_grp6_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp6_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp6_owner 80 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp6_owner 80 + +/* Register rw_trigger_grp7_owner, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_trigger_grp7_owner; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp7_owner 84 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp7_owner 84 + +/* Register rw_bus_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cfg_rw_bus_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus_mask 88 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus_mask 88 + +/* Register rw_bus_oe_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cfg_rw_bus_oe_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus_oe_mask 92 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus_oe_mask 92 + +/* Register rw_gio_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cfg_rw_gio_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_mask 96 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_mask 96 + +/* Register rw_gio_oe_mask, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cfg_rw_gio_oe_mask; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_oe_mask 100 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_oe_mask 100 + +/* Register rw_pinmapping, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int bus_byte0 : 2; + unsigned int bus_byte1 : 2; + unsigned int bus_byte2 : 2; + unsigned int bus_byte3 : 2; + unsigned int gio3_0 : 2; + unsigned int gio7_4 : 2; + unsigned int gio11_8 : 2; + unsigned int gio15_12 : 2; + unsigned int gio19_16 : 2; + unsigned int gio23_20 : 2; + unsigned int gio27_24 : 2; + unsigned int gio31_28 : 2; + unsigned int dummy1 : 8; +} reg_iop_sw_cfg_rw_pinmapping; +#define REG_RD_ADDR_iop_sw_cfg_rw_pinmapping 104 +#define REG_WR_ADDR_iop_sw_cfg_rw_pinmapping 104 + +/* Register rw_bus_out_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int bus_lo : 2; + unsigned int bus_hi : 2; + unsigned int bus_lo_oe : 2; + unsigned int bus_hi_oe : 2; + unsigned int dummy1 : 24; +} reg_iop_sw_cfg_rw_bus_out_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_bus_out_cfg 108 +#define REG_WR_ADDR_iop_sw_cfg_rw_bus_out_cfg 108 + +/* Register rw_gio_out_grp0_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio0 : 3; + unsigned int gio0_oe : 1; + unsigned int gio1 : 3; + unsigned int gio1_oe : 1; + unsigned int gio2 : 3; + unsigned int gio2_oe : 1; + unsigned int gio3 : 3; + unsigned int gio3_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp0_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp0_cfg 112 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp0_cfg 112 + +/* Register rw_gio_out_grp1_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio4 : 3; + unsigned int gio4_oe : 1; + unsigned int gio5 : 3; + unsigned int gio5_oe : 1; + unsigned int gio6 : 3; + unsigned int gio6_oe : 1; + unsigned int gio7 : 3; + unsigned int gio7_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp1_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp1_cfg 116 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp1_cfg 116 + +/* Register rw_gio_out_grp2_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio8 : 3; + unsigned int gio8_oe : 1; + unsigned int gio9 : 3; + unsigned int gio9_oe : 1; + unsigned int gio10 : 3; + unsigned int gio10_oe : 1; + unsigned int gio11 : 3; + unsigned int gio11_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp2_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp2_cfg 120 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp2_cfg 120 + +/* Register rw_gio_out_grp3_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio12 : 3; + unsigned int gio12_oe : 1; + unsigned int gio13 : 3; + unsigned int gio13_oe : 1; + unsigned int gio14 : 3; + unsigned int gio14_oe : 1; + unsigned int gio15 : 3; + unsigned int gio15_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp3_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp3_cfg 124 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp3_cfg 124 + +/* Register rw_gio_out_grp4_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio16 : 3; + unsigned int gio16_oe : 1; + unsigned int gio17 : 3; + unsigned int gio17_oe : 1; + unsigned int gio18 : 3; + unsigned int gio18_oe : 1; + unsigned int gio19 : 3; + unsigned int gio19_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp4_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp4_cfg 128 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp4_cfg 128 + +/* Register rw_gio_out_grp5_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio20 : 3; + unsigned int gio20_oe : 1; + unsigned int gio21 : 3; + unsigned int gio21_oe : 1; + unsigned int gio22 : 3; + unsigned int gio22_oe : 1; + unsigned int gio23 : 3; + unsigned int gio23_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp5_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp5_cfg 132 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp5_cfg 132 + +/* Register rw_gio_out_grp6_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio24 : 3; + unsigned int gio24_oe : 1; + unsigned int gio25 : 3; + unsigned int gio25_oe : 1; + unsigned int gio26 : 3; + unsigned int gio26_oe : 1; + unsigned int gio27 : 3; + unsigned int gio27_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp6_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp6_cfg 136 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp6_cfg 136 + +/* Register rw_gio_out_grp7_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int gio28 : 3; + unsigned int gio28_oe : 1; + unsigned int gio29 : 3; + unsigned int gio29_oe : 1; + unsigned int gio30 : 3; + unsigned int gio30_oe : 1; + unsigned int gio31 : 3; + unsigned int gio31_oe : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_gio_out_grp7_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp7_cfg 140 +#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp7_cfg 140 + +/* Register rw_spu_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int bus0_in : 1; + unsigned int bus1_in : 1; + unsigned int dummy1 : 30; +} reg_iop_sw_cfg_rw_spu_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_spu_cfg 144 +#define REG_WR_ADDR_iop_sw_cfg_rw_spu_cfg 144 + +/* Register rw_timer_grp0_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int ext_clk : 3; + unsigned int tmr0_en : 2; + unsigned int tmr1_en : 2; + unsigned int tmr2_en : 2; + unsigned int tmr3_en : 2; + unsigned int tmr0_dis : 2; + unsigned int tmr1_dis : 2; + unsigned int tmr2_dis : 2; + unsigned int tmr3_dis : 2; + unsigned int dummy1 : 13; +} reg_iop_sw_cfg_rw_timer_grp0_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp0_cfg 148 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp0_cfg 148 + +/* Register rw_timer_grp1_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int ext_clk : 3; + unsigned int tmr0_en : 2; + unsigned int tmr1_en : 2; + unsigned int tmr2_en : 2; + unsigned int tmr3_en : 2; + unsigned int tmr0_dis : 2; + unsigned int tmr1_dis : 2; + unsigned int tmr2_dis : 2; + unsigned int tmr3_dis : 2; + unsigned int dummy1 : 13; +} reg_iop_sw_cfg_rw_timer_grp1_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp1_cfg 152 +#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp1_cfg 152 + +/* Register rw_trigger_grps_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int grp0_dis : 1; + unsigned int grp0_en : 1; + unsigned int grp1_dis : 1; + unsigned int grp1_en : 1; + unsigned int grp2_dis : 1; + unsigned int grp2_en : 1; + unsigned int grp3_dis : 1; + unsigned int grp3_en : 1; + unsigned int grp4_dis : 1; + unsigned int grp4_en : 1; + unsigned int grp5_dis : 1; + unsigned int grp5_en : 1; + unsigned int grp6_dis : 1; + unsigned int grp6_en : 1; + unsigned int grp7_dis : 1; + unsigned int grp7_en : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cfg_rw_trigger_grps_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grps_cfg 156 +#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grps_cfg 156 + +/* Register rw_pdp_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int out_strb : 4; + unsigned int in_src : 2; + unsigned int in_size : 3; + unsigned int in_last : 2; + unsigned int in_strb : 4; + unsigned int dummy1 : 17; +} reg_iop_sw_cfg_rw_pdp_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_pdp_cfg 160 +#define REG_WR_ADDR_iop_sw_cfg_rw_pdp_cfg 160 + +/* Register rw_sdp_cfg, scope iop_sw_cfg, type rw */ +typedef struct { + unsigned int sdp_out_strb : 3; + unsigned int sdp_in_data : 3; + unsigned int sdp_in_last : 2; + unsigned int sdp_in_strb : 3; + unsigned int dummy1 : 21; +} reg_iop_sw_cfg_rw_sdp_cfg; +#define REG_RD_ADDR_iop_sw_cfg_rw_sdp_cfg 164 +#define REG_WR_ADDR_iop_sw_cfg_rw_sdp_cfg 164 + + +/* Constants */ +enum { + regk_iop_sw_cfg_a = 0x00000001, + regk_iop_sw_cfg_b = 0x00000002, + regk_iop_sw_cfg_bus = 0x00000000, + regk_iop_sw_cfg_bus_rot16 = 0x00000002, + regk_iop_sw_cfg_bus_rot24 = 0x00000003, + regk_iop_sw_cfg_bus_rot8 = 0x00000001, + regk_iop_sw_cfg_clk12 = 0x00000000, + regk_iop_sw_cfg_cpu = 0x00000000, + regk_iop_sw_cfg_gated_clk0 = 0x0000000e, + regk_iop_sw_cfg_gated_clk1 = 0x0000000f, + regk_iop_sw_cfg_gio0 = 0x00000004, + regk_iop_sw_cfg_gio1 = 0x00000001, + regk_iop_sw_cfg_gio2 = 0x00000005, + regk_iop_sw_cfg_gio3 = 0x00000002, + regk_iop_sw_cfg_gio4 = 0x00000006, + regk_iop_sw_cfg_gio5 = 0x00000003, + regk_iop_sw_cfg_gio6 = 0x00000007, + regk_iop_sw_cfg_gio7 = 0x00000004, + regk_iop_sw_cfg_gio_in18 = 0x00000002, + regk_iop_sw_cfg_gio_in19 = 0x00000003, + regk_iop_sw_cfg_gio_in20 = 0x00000004, + regk_iop_sw_cfg_gio_in21 = 0x00000005, + regk_iop_sw_cfg_gio_in26 = 0x00000006, + regk_iop_sw_cfg_gio_in27 = 0x00000007, + regk_iop_sw_cfg_gio_in4 = 0x00000000, + regk_iop_sw_cfg_gio_in5 = 0x00000001, + regk_iop_sw_cfg_last_timer_grp0_tmr2 = 0x00000001, + regk_iop_sw_cfg_last_timer_grp1_tmr2 = 0x00000002, + regk_iop_sw_cfg_last_timer_grp1_tmr3 = 0x00000003, + regk_iop_sw_cfg_mpu = 0x00000001, + regk_iop_sw_cfg_none = 0x00000000, + regk_iop_sw_cfg_pdp_out = 0x00000001, + regk_iop_sw_cfg_pdp_out_hi = 0x00000001, + regk_iop_sw_cfg_pdp_out_lo = 0x00000000, + regk_iop_sw_cfg_rw_bus_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_bus_oe_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_bus_out_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_crc_par_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_dmc_in_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_dmc_out_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_in_extra_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_in_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_out_extra_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_fifo_out_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_oe_mask_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp0_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp1_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp2_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp3_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp4_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp5_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp6_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_gio_out_grp7_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_pdp_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_pinmapping_default = 0x00555555, + regk_iop_sw_cfg_rw_sap_in_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_sap_out_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_scrc_in_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_scrc_out_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_sdp_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_spu_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_spu_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp0_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp1_cfg_default = 0x00000000, + regk_iop_sw_cfg_rw_timer_grp1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp0_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp1_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp2_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp3_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp4_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp5_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp6_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grp7_owner_default = 0x00000000, + regk_iop_sw_cfg_rw_trigger_grps_cfg_default = 0x00000000, + regk_iop_sw_cfg_sdp_out = 0x00000004, + regk_iop_sw_cfg_size16 = 0x00000002, + regk_iop_sw_cfg_size24 = 0x00000003, + regk_iop_sw_cfg_size32 = 0x00000004, + regk_iop_sw_cfg_size8 = 0x00000001, + regk_iop_sw_cfg_spu = 0x00000002, + regk_iop_sw_cfg_spu_bus_out0_hi = 0x00000002, + regk_iop_sw_cfg_spu_bus_out0_lo = 0x00000002, + regk_iop_sw_cfg_spu_bus_out1_hi = 0x00000003, + regk_iop_sw_cfg_spu_bus_out1_lo = 0x00000003, + regk_iop_sw_cfg_spu_g0 = 0x00000007, + regk_iop_sw_cfg_spu_g1 = 0x00000007, + regk_iop_sw_cfg_spu_g2 = 0x00000007, + regk_iop_sw_cfg_spu_g3 = 0x00000007, + regk_iop_sw_cfg_spu_g4 = 0x00000007, + regk_iop_sw_cfg_spu_g5 = 0x00000007, + regk_iop_sw_cfg_spu_g6 = 0x00000007, + regk_iop_sw_cfg_spu_g7 = 0x00000007, + regk_iop_sw_cfg_spu_gio0 = 0x00000000, + regk_iop_sw_cfg_spu_gio1 = 0x00000001, + regk_iop_sw_cfg_spu_gio5 = 0x00000005, + regk_iop_sw_cfg_spu_gio6 = 0x00000006, + regk_iop_sw_cfg_spu_gio7 = 0x00000007, + regk_iop_sw_cfg_spu_gio_out0 = 0x00000008, + regk_iop_sw_cfg_spu_gio_out1 = 0x00000009, + regk_iop_sw_cfg_spu_gio_out2 = 0x0000000a, + regk_iop_sw_cfg_spu_gio_out3 = 0x0000000b, + regk_iop_sw_cfg_spu_gio_out4 = 0x0000000c, + regk_iop_sw_cfg_spu_gio_out5 = 0x0000000d, + regk_iop_sw_cfg_spu_gio_out6 = 0x0000000e, + regk_iop_sw_cfg_spu_gio_out7 = 0x0000000f, + regk_iop_sw_cfg_spu_gioout0 = 0x00000000, + regk_iop_sw_cfg_spu_gioout1 = 0x00000000, + regk_iop_sw_cfg_spu_gioout10 = 0x00000007, + regk_iop_sw_cfg_spu_gioout11 = 0x00000007, + regk_iop_sw_cfg_spu_gioout12 = 0x00000007, + regk_iop_sw_cfg_spu_gioout13 = 0x00000007, + regk_iop_sw_cfg_spu_gioout14 = 0x00000007, + regk_iop_sw_cfg_spu_gioout15 = 0x00000007, + regk_iop_sw_cfg_spu_gioout16 = 0x00000007, + regk_iop_sw_cfg_spu_gioout17 = 0x00000007, + regk_iop_sw_cfg_spu_gioout18 = 0x00000007, + regk_iop_sw_cfg_spu_gioout19 = 0x00000007, + regk_iop_sw_cfg_spu_gioout2 = 0x00000001, + regk_iop_sw_cfg_spu_gioout20 = 0x00000007, + regk_iop_sw_cfg_spu_gioout21 = 0x00000007, + regk_iop_sw_cfg_spu_gioout22 = 0x00000007, + regk_iop_sw_cfg_spu_gioout23 = 0x00000007, + regk_iop_sw_cfg_spu_gioout24 = 0x00000007, + regk_iop_sw_cfg_spu_gioout25 = 0x00000007, + regk_iop_sw_cfg_spu_gioout26 = 0x00000007, + regk_iop_sw_cfg_spu_gioout27 = 0x00000007, + regk_iop_sw_cfg_spu_gioout28 = 0x00000007, + regk_iop_sw_cfg_spu_gioout29 = 0x00000007, + regk_iop_sw_cfg_spu_gioout3 = 0x00000001, + regk_iop_sw_cfg_spu_gioout30 = 0x00000007, + regk_iop_sw_cfg_spu_gioout31 = 0x00000007, + regk_iop_sw_cfg_spu_gioout4 = 0x00000002, + regk_iop_sw_cfg_spu_gioout5 = 0x00000002, + regk_iop_sw_cfg_spu_gioout6 = 0x00000003, + regk_iop_sw_cfg_spu_gioout7 = 0x00000003, + regk_iop_sw_cfg_spu_gioout8 = 0x00000007, + regk_iop_sw_cfg_spu_gioout9 = 0x00000007, + regk_iop_sw_cfg_strb_timer_grp0_tmr0 = 0x00000001, + regk_iop_sw_cfg_strb_timer_grp0_tmr1 = 0x00000002, + regk_iop_sw_cfg_strb_timer_grp1_tmr0 = 0x00000003, + regk_iop_sw_cfg_strb_timer_grp1_tmr1 = 0x00000002, + regk_iop_sw_cfg_timer_grp0 = 0x00000000, + regk_iop_sw_cfg_timer_grp0_rot = 0x00000001, + regk_iop_sw_cfg_timer_grp0_strb0 = 0x00000005, + regk_iop_sw_cfg_timer_grp0_strb1 = 0x00000005, + regk_iop_sw_cfg_timer_grp0_strb2 = 0x00000005, + regk_iop_sw_cfg_timer_grp0_strb3 = 0x00000005, + regk_iop_sw_cfg_timer_grp0_tmr0 = 0x00000002, + regk_iop_sw_cfg_timer_grp1 = 0x00000000, + regk_iop_sw_cfg_timer_grp1_rot = 0x00000001, + regk_iop_sw_cfg_timer_grp1_strb0 = 0x00000006, + regk_iop_sw_cfg_timer_grp1_strb1 = 0x00000006, + regk_iop_sw_cfg_timer_grp1_strb2 = 0x00000006, + regk_iop_sw_cfg_timer_grp1_strb3 = 0x00000006, + regk_iop_sw_cfg_timer_grp1_tmr0 = 0x00000003, + regk_iop_sw_cfg_trig0_0 = 0x00000000, + regk_iop_sw_cfg_trig0_1 = 0x00000000, + regk_iop_sw_cfg_trig0_2 = 0x00000000, + regk_iop_sw_cfg_trig0_3 = 0x00000000, + regk_iop_sw_cfg_trig1_0 = 0x00000000, + regk_iop_sw_cfg_trig1_1 = 0x00000000, + regk_iop_sw_cfg_trig1_2 = 0x00000000, + regk_iop_sw_cfg_trig1_3 = 0x00000000, + regk_iop_sw_cfg_trig2_0 = 0x00000001, + regk_iop_sw_cfg_trig2_1 = 0x00000001, + regk_iop_sw_cfg_trig2_2 = 0x00000001, + regk_iop_sw_cfg_trig2_3 = 0x00000001, + regk_iop_sw_cfg_trig3_0 = 0x00000001, + regk_iop_sw_cfg_trig3_1 = 0x00000001, + regk_iop_sw_cfg_trig3_2 = 0x00000001, + regk_iop_sw_cfg_trig3_3 = 0x00000001, + regk_iop_sw_cfg_trig4_0 = 0x00000002, + regk_iop_sw_cfg_trig4_1 = 0x00000002, + regk_iop_sw_cfg_trig4_2 = 0x00000002, + regk_iop_sw_cfg_trig4_3 = 0x00000002, + regk_iop_sw_cfg_trig5_0 = 0x00000002, + regk_iop_sw_cfg_trig5_1 = 0x00000002, + regk_iop_sw_cfg_trig5_2 = 0x00000002, + regk_iop_sw_cfg_trig5_3 = 0x00000002, + regk_iop_sw_cfg_trig6_0 = 0x00000003, + regk_iop_sw_cfg_trig6_1 = 0x00000003, + regk_iop_sw_cfg_trig6_2 = 0x00000003, + regk_iop_sw_cfg_trig6_3 = 0x00000003, + regk_iop_sw_cfg_trig7_0 = 0x00000003, + regk_iop_sw_cfg_trig7_1 = 0x00000003, + regk_iop_sw_cfg_trig7_2 = 0x00000003, + regk_iop_sw_cfg_trig7_3 = 0x00000003 +}; +#endif /* __iop_sw_cfg_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_cpu_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_cpu_defs.h new file mode 100644 index 000000000000..a16f556370eb --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_cpu_defs.h @@ -0,0 +1,522 @@ +#ifndef __iop_sw_cpu_defs_h +#define __iop_sw_cpu_defs_h + +/* + * This file is autogenerated from + * file: iop_sw_cpu.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_cpu_defs.h iop_sw_cpu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_cpu */ + +/* Register r_mpu_trace, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_mpu_trace; +#define REG_RD_ADDR_iop_sw_cpu_r_mpu_trace 0 + +/* Register r_spu_trace, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_spu_trace; +#define REG_RD_ADDR_iop_sw_cpu_r_spu_trace 4 + +/* Register r_spu_fsm_trace, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_spu_fsm_trace; +#define REG_RD_ADDR_iop_sw_cpu_r_spu_fsm_trace 8 + +/* Register rw_mc_ctrl, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int keep_owner : 1; + unsigned int cmd : 2; + unsigned int size : 3; + unsigned int wr_spu_mem : 1; + unsigned int dummy1 : 25; +} reg_iop_sw_cpu_rw_mc_ctrl; +#define REG_RD_ADDR_iop_sw_cpu_rw_mc_ctrl 12 +#define REG_WR_ADDR_iop_sw_cpu_rw_mc_ctrl 12 + +/* Register rw_mc_data, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_mc_data; +#define REG_RD_ADDR_iop_sw_cpu_rw_mc_data 16 +#define REG_WR_ADDR_iop_sw_cpu_rw_mc_data 16 + +/* Register rw_mc_addr, scope iop_sw_cpu, type rw */ +typedef unsigned int reg_iop_sw_cpu_rw_mc_addr; +#define REG_RD_ADDR_iop_sw_cpu_rw_mc_addr 20 +#define REG_WR_ADDR_iop_sw_cpu_rw_mc_addr 20 + +/* Register rs_mc_data, scope iop_sw_cpu, type rs */ +typedef unsigned int reg_iop_sw_cpu_rs_mc_data; +#define REG_RD_ADDR_iop_sw_cpu_rs_mc_data 24 + +/* Register r_mc_data, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_mc_data; +#define REG_RD_ADDR_iop_sw_cpu_r_mc_data 28 + +/* Register r_mc_stat, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int busy_cpu : 1; + unsigned int busy_mpu : 1; + unsigned int busy_spu : 1; + unsigned int owned_by_cpu : 1; + unsigned int owned_by_mpu : 1; + unsigned int owned_by_spu : 1; + unsigned int dummy1 : 26; +} reg_iop_sw_cpu_r_mc_stat; +#define REG_RD_ADDR_iop_sw_cpu_r_mc_stat 32 + +/* Register rw_bus_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cpu_rw_bus_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus_clr_mask 36 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus_clr_mask 36 + +/* Register rw_bus_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_cpu_rw_bus_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus_set_mask 40 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus_set_mask 40 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cpu_rw_bus_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus_oe_clr_mask 44 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus_oe_clr_mask 44 + +/* Register rw_bus_oe_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_cpu_rw_bus_oe_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_bus_oe_set_mask 48 +#define REG_WR_ADDR_iop_sw_cpu_rw_bus_oe_set_mask 48 + +/* Register r_bus_in, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_bus_in; +#define REG_RD_ADDR_iop_sw_cpu_r_bus_in 52 + +/* Register rw_gio_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_clr_mask 56 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_clr_mask 56 + +/* Register rw_gio_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_set_mask 60 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_set_mask 60 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_oe_clr_mask 64 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_oe_clr_mask 64 + +/* Register rw_gio_oe_set_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_cpu_rw_gio_oe_set_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_gio_oe_set_mask 68 +#define REG_WR_ADDR_iop_sw_cpu_rw_gio_oe_set_mask 68 + +/* Register r_gio_in, scope iop_sw_cpu, type r */ +typedef unsigned int reg_iop_sw_cpu_r_gio_in; +#define REG_RD_ADDR_iop_sw_cpu_r_gio_in 72 + +/* Register rw_intr0_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu_0 : 1; + unsigned int spu_1 : 1; + unsigned int spu_2 : 1; + unsigned int spu_3 : 1; + unsigned int spu_4 : 1; + unsigned int spu_5 : 1; + unsigned int spu_6 : 1; + unsigned int spu_7 : 1; + unsigned int spu_8 : 1; + unsigned int spu_9 : 1; + unsigned int spu_10 : 1; + unsigned int spu_11 : 1; + unsigned int spu_12 : 1; + unsigned int spu_13 : 1; + unsigned int spu_14 : 1; + unsigned int spu_15 : 1; +} reg_iop_sw_cpu_rw_intr0_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_intr0_mask 76 +#define REG_WR_ADDR_iop_sw_cpu_rw_intr0_mask 76 + +/* Register rw_ack_intr0, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu_0 : 1; + unsigned int spu_1 : 1; + unsigned int spu_2 : 1; + unsigned int spu_3 : 1; + unsigned int spu_4 : 1; + unsigned int spu_5 : 1; + unsigned int spu_6 : 1; + unsigned int spu_7 : 1; + unsigned int spu_8 : 1; + unsigned int spu_9 : 1; + unsigned int spu_10 : 1; + unsigned int spu_11 : 1; + unsigned int spu_12 : 1; + unsigned int spu_13 : 1; + unsigned int spu_14 : 1; + unsigned int spu_15 : 1; +} reg_iop_sw_cpu_rw_ack_intr0; +#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr0 80 +#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr0 80 + +/* Register r_intr0, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu_0 : 1; + unsigned int spu_1 : 1; + unsigned int spu_2 : 1; + unsigned int spu_3 : 1; + unsigned int spu_4 : 1; + unsigned int spu_5 : 1; + unsigned int spu_6 : 1; + unsigned int spu_7 : 1; + unsigned int spu_8 : 1; + unsigned int spu_9 : 1; + unsigned int spu_10 : 1; + unsigned int spu_11 : 1; + unsigned int spu_12 : 1; + unsigned int spu_13 : 1; + unsigned int spu_14 : 1; + unsigned int spu_15 : 1; +} reg_iop_sw_cpu_r_intr0; +#define REG_RD_ADDR_iop_sw_cpu_r_intr0 84 + +/* Register r_masked_intr0, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_0 : 1; + unsigned int mpu_1 : 1; + unsigned int mpu_2 : 1; + unsigned int mpu_3 : 1; + unsigned int mpu_4 : 1; + unsigned int mpu_5 : 1; + unsigned int mpu_6 : 1; + unsigned int mpu_7 : 1; + unsigned int mpu_8 : 1; + unsigned int mpu_9 : 1; + unsigned int mpu_10 : 1; + unsigned int mpu_11 : 1; + unsigned int mpu_12 : 1; + unsigned int mpu_13 : 1; + unsigned int mpu_14 : 1; + unsigned int mpu_15 : 1; + unsigned int spu_0 : 1; + unsigned int spu_1 : 1; + unsigned int spu_2 : 1; + unsigned int spu_3 : 1; + unsigned int spu_4 : 1; + unsigned int spu_5 : 1; + unsigned int spu_6 : 1; + unsigned int spu_7 : 1; + unsigned int spu_8 : 1; + unsigned int spu_9 : 1; + unsigned int spu_10 : 1; + unsigned int spu_11 : 1; + unsigned int spu_12 : 1; + unsigned int spu_13 : 1; + unsigned int spu_14 : 1; + unsigned int spu_15 : 1; +} reg_iop_sw_cpu_r_masked_intr0; +#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr0 88 + +/* Register rw_intr1_mask, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int dmc_in : 1; + unsigned int dmc_out : 1; + unsigned int fifo_in : 1; + unsigned int fifo_out : 1; + unsigned int fifo_in_extra : 1; + unsigned int fifo_out_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; +} reg_iop_sw_cpu_rw_intr1_mask; +#define REG_RD_ADDR_iop_sw_cpu_rw_intr1_mask 92 +#define REG_WR_ADDR_iop_sw_cpu_rw_intr1_mask 92 + +/* Register rw_ack_intr1, scope iop_sw_cpu, type rw */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_cpu_rw_ack_intr1; +#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr1 96 +#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr1 96 + +/* Register r_intr1, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int dmc_in : 1; + unsigned int dmc_out : 1; + unsigned int fifo_in : 1; + unsigned int fifo_out : 1; + unsigned int fifo_in_extra : 1; + unsigned int fifo_out_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; +} reg_iop_sw_cpu_r_intr1; +#define REG_RD_ADDR_iop_sw_cpu_r_intr1 100 + +/* Register r_masked_intr1, scope iop_sw_cpu, type r */ +typedef struct { + unsigned int mpu_16 : 1; + unsigned int mpu_17 : 1; + unsigned int mpu_18 : 1; + unsigned int mpu_19 : 1; + unsigned int mpu_20 : 1; + unsigned int mpu_21 : 1; + unsigned int mpu_22 : 1; + unsigned int mpu_23 : 1; + unsigned int mpu_24 : 1; + unsigned int mpu_25 : 1; + unsigned int mpu_26 : 1; + unsigned int mpu_27 : 1; + unsigned int mpu_28 : 1; + unsigned int mpu_29 : 1; + unsigned int mpu_30 : 1; + unsigned int mpu_31 : 1; + unsigned int dmc_in : 1; + unsigned int dmc_out : 1; + unsigned int fifo_in : 1; + unsigned int fifo_out : 1; + unsigned int fifo_in_extra : 1; + unsigned int fifo_out_extra : 1; + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; +} reg_iop_sw_cpu_r_masked_intr1; +#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr1 104 + + +/* Constants */ +enum { + regk_iop_sw_cpu_copy = 0x00000000, + regk_iop_sw_cpu_no = 0x00000000, + regk_iop_sw_cpu_rd = 0x00000002, + regk_iop_sw_cpu_reg_copy = 0x00000001, + regk_iop_sw_cpu_rw_bus_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus_oe_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus_oe_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_bus_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_oe_clr_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_oe_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_gio_set_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_intr0_mask_default = 0x00000000, + regk_iop_sw_cpu_rw_intr1_mask_default = 0x00000000, + regk_iop_sw_cpu_wr = 0x00000003, + regk_iop_sw_cpu_yes = 0x00000001 +}; +#endif /* __iop_sw_cpu_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_mpu_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_mpu_defs.h new file mode 100644 index 000000000000..a2e4e1a33e57 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_mpu_defs.h @@ -0,0 +1,648 @@ +#ifndef __iop_sw_mpu_defs_h +#define __iop_sw_mpu_defs_h + +/* + * This file is autogenerated from + * file: iop_sw_mpu.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_mpu_defs.h iop_sw_mpu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_mpu */ + +/* Register rw_sw_cfg_owner, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int cfg : 2; + unsigned int dummy1 : 30; +} reg_iop_sw_mpu_rw_sw_cfg_owner; +#define REG_RD_ADDR_iop_sw_mpu_rw_sw_cfg_owner 0 +#define REG_WR_ADDR_iop_sw_mpu_rw_sw_cfg_owner 0 + +/* Register r_spu_trace, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_spu_trace; +#define REG_RD_ADDR_iop_sw_mpu_r_spu_trace 4 + +/* Register r_spu_fsm_trace, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_spu_fsm_trace; +#define REG_RD_ADDR_iop_sw_mpu_r_spu_fsm_trace 8 + +/* Register rw_mc_ctrl, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int keep_owner : 1; + unsigned int cmd : 2; + unsigned int size : 3; + unsigned int wr_spu_mem : 1; + unsigned int dummy1 : 25; +} reg_iop_sw_mpu_rw_mc_ctrl; +#define REG_RD_ADDR_iop_sw_mpu_rw_mc_ctrl 12 +#define REG_WR_ADDR_iop_sw_mpu_rw_mc_ctrl 12 + +/* Register rw_mc_data, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_mc_data; +#define REG_RD_ADDR_iop_sw_mpu_rw_mc_data 16 +#define REG_WR_ADDR_iop_sw_mpu_rw_mc_data 16 + +/* Register rw_mc_addr, scope iop_sw_mpu, type rw */ +typedef unsigned int reg_iop_sw_mpu_rw_mc_addr; +#define REG_RD_ADDR_iop_sw_mpu_rw_mc_addr 20 +#define REG_WR_ADDR_iop_sw_mpu_rw_mc_addr 20 + +/* Register rs_mc_data, scope iop_sw_mpu, type rs */ +typedef unsigned int reg_iop_sw_mpu_rs_mc_data; +#define REG_RD_ADDR_iop_sw_mpu_rs_mc_data 24 + +/* Register r_mc_data, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_mc_data; +#define REG_RD_ADDR_iop_sw_mpu_r_mc_data 28 + +/* Register r_mc_stat, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int busy_cpu : 1; + unsigned int busy_mpu : 1; + unsigned int busy_spu : 1; + unsigned int owned_by_cpu : 1; + unsigned int owned_by_mpu : 1; + unsigned int owned_by_spu : 1; + unsigned int dummy1 : 26; +} reg_iop_sw_mpu_r_mc_stat; +#define REG_RD_ADDR_iop_sw_mpu_r_mc_stat 32 + +/* Register rw_bus_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_mpu_rw_bus_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus_clr_mask 36 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus_clr_mask 36 + +/* Register rw_bus_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_mpu_rw_bus_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus_set_mask 40 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus_set_mask 40 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_mpu_rw_bus_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus_oe_clr_mask 44 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus_oe_clr_mask 44 + +/* Register rw_bus_oe_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_mpu_rw_bus_oe_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_bus_oe_set_mask 48 +#define REG_WR_ADDR_iop_sw_mpu_rw_bus_oe_set_mask 48 + +/* Register r_bus_in, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_bus_in; +#define REG_RD_ADDR_iop_sw_mpu_r_bus_in 52 + +/* Register rw_gio_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_clr_mask 56 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_clr_mask 56 + +/* Register rw_gio_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_set_mask 60 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_set_mask 60 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_oe_clr_mask 64 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_oe_clr_mask 64 + +/* Register rw_gio_oe_set_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_mpu_rw_gio_oe_set_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_gio_oe_set_mask 68 +#define REG_WR_ADDR_iop_sw_mpu_rw_gio_oe_set_mask 68 + +/* Register r_gio_in, scope iop_sw_mpu, type r */ +typedef unsigned int reg_iop_sw_mpu_r_gio_in; +#define REG_RD_ADDR_iop_sw_mpu_r_gio_in 72 + +/* Register rw_cpu_intr, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int intr16 : 1; + unsigned int intr17 : 1; + unsigned int intr18 : 1; + unsigned int intr19 : 1; + unsigned int intr20 : 1; + unsigned int intr21 : 1; + unsigned int intr22 : 1; + unsigned int intr23 : 1; + unsigned int intr24 : 1; + unsigned int intr25 : 1; + unsigned int intr26 : 1; + unsigned int intr27 : 1; + unsigned int intr28 : 1; + unsigned int intr29 : 1; + unsigned int intr30 : 1; + unsigned int intr31 : 1; +} reg_iop_sw_mpu_rw_cpu_intr; +#define REG_RD_ADDR_iop_sw_mpu_rw_cpu_intr 76 +#define REG_WR_ADDR_iop_sw_mpu_rw_cpu_intr 76 + +/* Register r_cpu_intr, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int intr16 : 1; + unsigned int intr17 : 1; + unsigned int intr18 : 1; + unsigned int intr19 : 1; + unsigned int intr20 : 1; + unsigned int intr21 : 1; + unsigned int intr22 : 1; + unsigned int intr23 : 1; + unsigned int intr24 : 1; + unsigned int intr25 : 1; + unsigned int intr26 : 1; + unsigned int intr27 : 1; + unsigned int intr28 : 1; + unsigned int intr29 : 1; + unsigned int intr30 : 1; + unsigned int intr31 : 1; +} reg_iop_sw_mpu_r_cpu_intr; +#define REG_RD_ADDR_iop_sw_mpu_r_cpu_intr 80 + +/* Register rw_intr_grp0_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr0 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr1 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr2 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr3 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_rw_intr_grp0_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp0_mask 84 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp0_mask 84 + +/* Register rw_ack_intr_grp0, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr0 : 1; + unsigned int dummy1 : 3; + unsigned int spu_intr1 : 1; + unsigned int dummy2 : 3; + unsigned int spu_intr2 : 1; + unsigned int dummy3 : 3; + unsigned int spu_intr3 : 1; + unsigned int dummy4 : 19; +} reg_iop_sw_mpu_rw_ack_intr_grp0; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp0 88 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp0 88 + +/* Register r_intr_grp0, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr0 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr1 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr2 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr3 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_intr_grp0; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp0 92 + +/* Register r_masked_intr_grp0, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr0 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr1 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr2 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr3 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_masked_intr_grp0; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp0 96 + +/* Register rw_intr_grp1_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr4 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr5 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr6 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr7 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_rw_intr_grp1_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp1_mask 100 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp1_mask 100 + +/* Register rw_ack_intr_grp1, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr4 : 1; + unsigned int dummy1 : 3; + unsigned int spu_intr5 : 1; + unsigned int dummy2 : 3; + unsigned int spu_intr6 : 1; + unsigned int dummy3 : 3; + unsigned int spu_intr7 : 1; + unsigned int dummy4 : 19; +} reg_iop_sw_mpu_rw_ack_intr_grp1; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp1 104 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp1 104 + +/* Register r_intr_grp1, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr4 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr5 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr6 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr7 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_intr_grp1; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp1 108 + +/* Register r_masked_intr_grp1, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr4 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr5 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr6 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr7 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_masked_intr_grp1; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp1 112 + +/* Register rw_intr_grp2_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr8 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr9 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr10 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr11 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_rw_intr_grp2_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp2_mask 116 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp2_mask 116 + +/* Register rw_ack_intr_grp2, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr8 : 1; + unsigned int dummy1 : 3; + unsigned int spu_intr9 : 1; + unsigned int dummy2 : 3; + unsigned int spu_intr10 : 1; + unsigned int dummy3 : 3; + unsigned int spu_intr11 : 1; + unsigned int dummy4 : 19; +} reg_iop_sw_mpu_rw_ack_intr_grp2; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp2 120 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp2 120 + +/* Register r_intr_grp2, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr8 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr9 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr10 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr11 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_intr_grp2; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp2 124 + +/* Register r_masked_intr_grp2, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr8 : 1; + unsigned int trigger_grp0 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr9 : 1; + unsigned int trigger_grp1 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int spu_intr10 : 1; + unsigned int trigger_grp2 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr11 : 1; + unsigned int trigger_grp3 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_masked_intr_grp2; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp2 128 + +/* Register rw_intr_grp3_mask, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr12 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr13 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr14 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr15 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_rw_intr_grp3_mask; +#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp3_mask 132 +#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp3_mask 132 + +/* Register rw_ack_intr_grp3, scope iop_sw_mpu, type rw */ +typedef struct { + unsigned int spu_intr12 : 1; + unsigned int dummy1 : 3; + unsigned int spu_intr13 : 1; + unsigned int dummy2 : 3; + unsigned int spu_intr14 : 1; + unsigned int dummy3 : 3; + unsigned int spu_intr15 : 1; + unsigned int dummy4 : 19; +} reg_iop_sw_mpu_rw_ack_intr_grp3; +#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp3 136 +#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp3 136 + +/* Register r_intr_grp3, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr12 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr13 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr14 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr15 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_intr_grp3; +#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp3 140 + +/* Register r_masked_intr_grp3, scope iop_sw_mpu, type r */ +typedef struct { + unsigned int spu_intr12 : 1; + unsigned int trigger_grp4 : 1; + unsigned int fifo_out_extra : 1; + unsigned int dmc_out : 1; + unsigned int spu_intr13 : 1; + unsigned int trigger_grp5 : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_in : 1; + unsigned int spu_intr14 : 1; + unsigned int trigger_grp6 : 1; + unsigned int timer_grp0 : 1; + unsigned int fifo_out : 1; + unsigned int spu_intr15 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_mpu_r_masked_intr_grp3; +#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp3 144 + + +/* Constants */ +enum { + regk_iop_sw_mpu_copy = 0x00000000, + regk_iop_sw_mpu_cpu = 0x00000000, + regk_iop_sw_mpu_mpu = 0x00000001, + regk_iop_sw_mpu_no = 0x00000000, + regk_iop_sw_mpu_nop = 0x00000000, + regk_iop_sw_mpu_rd = 0x00000002, + regk_iop_sw_mpu_reg_copy = 0x00000001, + regk_iop_sw_mpu_rw_bus_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus_oe_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus_oe_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_bus_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_oe_clr_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_oe_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_gio_set_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp0_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp1_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp2_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_intr_grp3_mask_default = 0x00000000, + regk_iop_sw_mpu_rw_sw_cfg_owner_default = 0x00000000, + regk_iop_sw_mpu_set = 0x00000001, + regk_iop_sw_mpu_spu = 0x00000002, + regk_iop_sw_mpu_wr = 0x00000003, + regk_iop_sw_mpu_yes = 0x00000001 +}; +#endif /* __iop_sw_mpu_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_spu_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_spu_defs.h new file mode 100644 index 000000000000..c8560b865a1a --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_sw_spu_defs.h @@ -0,0 +1,441 @@ +#ifndef __iop_sw_spu_defs_h +#define __iop_sw_spu_defs_h + +/* + * This file is autogenerated from + * file: iop_sw_spu.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_spu_defs.h iop_sw_spu.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_sw_spu */ + +/* Register r_mpu_trace, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_mpu_trace; +#define REG_RD_ADDR_iop_sw_spu_r_mpu_trace 0 + +/* Register rw_mc_ctrl, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int keep_owner : 1; + unsigned int cmd : 2; + unsigned int size : 3; + unsigned int wr_spu_mem : 1; + unsigned int dummy1 : 25; +} reg_iop_sw_spu_rw_mc_ctrl; +#define REG_RD_ADDR_iop_sw_spu_rw_mc_ctrl 4 +#define REG_WR_ADDR_iop_sw_spu_rw_mc_ctrl 4 + +/* Register rw_mc_data, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_mc_data; +#define REG_RD_ADDR_iop_sw_spu_rw_mc_data 8 +#define REG_WR_ADDR_iop_sw_spu_rw_mc_data 8 + +/* Register rw_mc_addr, scope iop_sw_spu, type rw */ +typedef unsigned int reg_iop_sw_spu_rw_mc_addr; +#define REG_RD_ADDR_iop_sw_spu_rw_mc_addr 12 +#define REG_WR_ADDR_iop_sw_spu_rw_mc_addr 12 + +/* Register rs_mc_data, scope iop_sw_spu, type rs */ +typedef unsigned int reg_iop_sw_spu_rs_mc_data; +#define REG_RD_ADDR_iop_sw_spu_rs_mc_data 16 + +/* Register r_mc_data, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_mc_data; +#define REG_RD_ADDR_iop_sw_spu_r_mc_data 20 + +/* Register r_mc_stat, scope iop_sw_spu, type r */ +typedef struct { + unsigned int busy_cpu : 1; + unsigned int busy_mpu : 1; + unsigned int busy_spu : 1; + unsigned int owned_by_cpu : 1; + unsigned int owned_by_mpu : 1; + unsigned int owned_by_spu : 1; + unsigned int dummy1 : 26; +} reg_iop_sw_spu_r_mc_stat; +#define REG_RD_ADDR_iop_sw_spu_r_mc_stat 24 + +/* Register rw_bus_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_spu_rw_bus_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_clr_mask 28 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_clr_mask 28 + +/* Register rw_bus_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int byte2 : 8; + unsigned int byte3 : 8; +} reg_iop_sw_spu_rw_bus_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_set_mask 32 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_set_mask 32 + +/* Register rw_bus_oe_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_spu_rw_bus_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_oe_clr_mask 36 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_oe_clr_mask 36 + +/* Register rw_bus_oe_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 1; + unsigned int byte1 : 1; + unsigned int byte2 : 1; + unsigned int byte3 : 1; + unsigned int dummy1 : 28; +} reg_iop_sw_spu_rw_bus_oe_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_oe_set_mask 40 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_oe_set_mask 40 + +/* Register r_bus_in, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_bus_in; +#define REG_RD_ADDR_iop_sw_spu_r_bus_in 44 + +/* Register rw_gio_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask 48 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask 48 + +/* Register rw_gio_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask 52 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask 52 + +/* Register rw_gio_oe_clr_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_oe_clr_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask 56 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask 56 + +/* Register rw_gio_oe_set_mask, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 32; +} reg_iop_sw_spu_rw_gio_oe_set_mask; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask 60 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask 60 + +/* Register r_gio_in, scope iop_sw_spu, type r */ +typedef unsigned int reg_iop_sw_spu_r_gio_in; +#define REG_RD_ADDR_iop_sw_spu_r_gio_in 64 + +/* Register rw_bus_clr_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus_clr_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_clr_mask_lo 68 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_clr_mask_lo 68 + +/* Register rw_bus_clr_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte2 : 8; + unsigned int byte3 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus_clr_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_clr_mask_hi 72 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_clr_mask_hi 72 + +/* Register rw_bus_set_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte0 : 8; + unsigned int byte1 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus_set_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_set_mask_lo 76 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_set_mask_lo 76 + +/* Register rw_bus_set_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int byte2 : 8; + unsigned int byte3 : 8; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_bus_set_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_bus_set_mask_hi 80 +#define REG_WR_ADDR_iop_sw_spu_rw_bus_set_mask_hi 80 + +/* Register rw_gio_clr_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_clr_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask_lo 84 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask_lo 84 + +/* Register rw_gio_clr_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_clr_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask_hi 88 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask_hi 88 + +/* Register rw_gio_set_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_set_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask_lo 92 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask_lo 92 + +/* Register rw_gio_set_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_set_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask_hi 96 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask_hi 96 + +/* Register rw_gio_oe_clr_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_clr_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_lo 100 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_lo 100 + +/* Register rw_gio_oe_clr_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_clr_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_hi 104 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_hi 104 + +/* Register rw_gio_oe_set_mask_lo, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_set_mask_lo; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask_lo 108 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask_lo 108 + +/* Register rw_gio_oe_set_mask_hi, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int val : 16; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_gio_oe_set_mask_hi; +#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask_hi 112 +#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask_hi 112 + +/* Register rw_cpu_intr, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_cpu_intr; +#define REG_RD_ADDR_iop_sw_spu_rw_cpu_intr 116 +#define REG_WR_ADDR_iop_sw_spu_rw_cpu_intr 116 + +/* Register r_cpu_intr, scope iop_sw_spu, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_r_cpu_intr; +#define REG_RD_ADDR_iop_sw_spu_r_cpu_intr 120 + +/* Register r_hw_intr, scope iop_sw_spu, type r */ +typedef struct { + unsigned int trigger_grp0 : 1; + unsigned int trigger_grp1 : 1; + unsigned int trigger_grp2 : 1; + unsigned int trigger_grp3 : 1; + unsigned int trigger_grp4 : 1; + unsigned int trigger_grp5 : 1; + unsigned int trigger_grp6 : 1; + unsigned int trigger_grp7 : 1; + unsigned int timer_grp0 : 1; + unsigned int timer_grp1 : 1; + unsigned int fifo_out : 1; + unsigned int fifo_out_extra : 1; + unsigned int fifo_in : 1; + unsigned int fifo_in_extra : 1; + unsigned int dmc_out : 1; + unsigned int dmc_in : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_r_hw_intr; +#define REG_RD_ADDR_iop_sw_spu_r_hw_intr 124 + +/* Register rw_mpu_intr, scope iop_sw_spu, type rw */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_rw_mpu_intr; +#define REG_RD_ADDR_iop_sw_spu_rw_mpu_intr 128 +#define REG_WR_ADDR_iop_sw_spu_rw_mpu_intr 128 + +/* Register r_mpu_intr, scope iop_sw_spu, type r */ +typedef struct { + unsigned int intr0 : 1; + unsigned int intr1 : 1; + unsigned int intr2 : 1; + unsigned int intr3 : 1; + unsigned int intr4 : 1; + unsigned int intr5 : 1; + unsigned int intr6 : 1; + unsigned int intr7 : 1; + unsigned int intr8 : 1; + unsigned int intr9 : 1; + unsigned int intr10 : 1; + unsigned int intr11 : 1; + unsigned int intr12 : 1; + unsigned int intr13 : 1; + unsigned int intr14 : 1; + unsigned int intr15 : 1; + unsigned int dummy1 : 16; +} reg_iop_sw_spu_r_mpu_intr; +#define REG_RD_ADDR_iop_sw_spu_r_mpu_intr 132 + + +/* Constants */ +enum { + regk_iop_sw_spu_copy = 0x00000000, + regk_iop_sw_spu_no = 0x00000000, + regk_iop_sw_spu_nop = 0x00000000, + regk_iop_sw_spu_rd = 0x00000002, + regk_iop_sw_spu_reg_copy = 0x00000001, + regk_iop_sw_spu_rw_bus_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus_oe_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus_oe_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_bus_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_oe_clr_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_oe_set_mask_default = 0x00000000, + regk_iop_sw_spu_rw_gio_set_mask_default = 0x00000000, + regk_iop_sw_spu_set = 0x00000001, + regk_iop_sw_spu_wr = 0x00000003, + regk_iop_sw_spu_yes = 0x00000001 +}; +#endif /* __iop_sw_spu_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_version_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_version_defs.h new file mode 100644 index 000000000000..20de425e652b --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/iop/iop_version_defs.h @@ -0,0 +1,96 @@ +#ifndef __iop_version_defs_h +#define __iop_version_defs_h + +/* + * This file is autogenerated from + * file: iop_version.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile iop_version_defs.h iop_version.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope iop_version */ + +/* Register r_version, scope iop_version, type r */ +typedef struct { + unsigned int nr : 8; + unsigned int dummy1 : 24; +} reg_iop_version_r_version; +#define REG_RD_ADDR_iop_version_r_version 0 + + +/* Constants */ +enum { + regk_iop_version_v2_0 = 0x00000002 +}; +#endif /* __iop_version_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/l2cache_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/l2cache_defs.h new file mode 100644 index 000000000000..243ac3c882cb --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/l2cache_defs.h @@ -0,0 +1,142 @@ +#ifndef __l2cache_defs_h +#define __l2cache_defs_h + +/* + * This file is autogenerated from + * file: l2cache.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile l2cache_defs.h l2cache.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope l2cache */ + +/* Register rw_cfg, scope l2cache, type rw */ +typedef struct { + unsigned int en : 1; + unsigned int dummy1 : 31; +} reg_l2cache_rw_cfg; +#define REG_RD_ADDR_l2cache_rw_cfg 0 +#define REG_WR_ADDR_l2cache_rw_cfg 0 + +/* Register rw_ctrl, scope l2cache, type rw */ +typedef struct { + unsigned int dummy1 : 7; + unsigned int cbase : 9; + unsigned int dummy2 : 4; + unsigned int csize : 10; + unsigned int dummy3 : 2; +} reg_l2cache_rw_ctrl; +#define REG_RD_ADDR_l2cache_rw_ctrl 4 +#define REG_WR_ADDR_l2cache_rw_ctrl 4 + +/* Register rw_idxop, scope l2cache, type rw */ +typedef struct { + unsigned int idx : 10; + unsigned int dummy1 : 14; + unsigned int way : 3; + unsigned int dummy2 : 2; + unsigned int cmd : 3; +} reg_l2cache_rw_idxop; +#define REG_RD_ADDR_l2cache_rw_idxop 8 +#define REG_WR_ADDR_l2cache_rw_idxop 8 + +/* Register rw_addrop_addr, scope l2cache, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_l2cache_rw_addrop_addr; +#define REG_RD_ADDR_l2cache_rw_addrop_addr 12 +#define REG_WR_ADDR_l2cache_rw_addrop_addr 12 + +/* Register rw_addrop_ctrl, scope l2cache, type rw */ +typedef struct { + unsigned int size : 16; + unsigned int dummy1 : 13; + unsigned int cmd : 3; +} reg_l2cache_rw_addrop_ctrl; +#define REG_RD_ADDR_l2cache_rw_addrop_ctrl 16 +#define REG_WR_ADDR_l2cache_rw_addrop_ctrl 16 + + +/* Constants */ +enum { + regk_l2cache_flush = 0x00000001, + regk_l2cache_no = 0x00000000, + regk_l2cache_rw_addrop_addr_default = 0x00000000, + regk_l2cache_rw_addrop_ctrl_default = 0x00000000, + regk_l2cache_rw_cfg_default = 0x00000000, + regk_l2cache_rw_ctrl_default = 0x00000000, + regk_l2cache_rw_idxop_default = 0x00000000, + regk_l2cache_yes = 0x00000001 +}; +#endif /* __l2cache_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/marb_bar_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/marb_bar_defs.h new file mode 100644 index 000000000000..c0e7628cbf7d --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/marb_bar_defs.h @@ -0,0 +1,482 @@ +#ifndef __marb_bar_defs_h +#define __marb_bar_defs_h + +/* + * This file is autogenerated from + * file: marb_bar.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile marb_bar_defs.h marb_bar.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_bar */ + +#define STRIDE_marb_bar_rw_ddr2_slots 4 +/* Register rw_ddr2_slots, scope marb_bar, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_bar_rw_ddr2_slots; +#define REG_RD_ADDR_marb_bar_rw_ddr2_slots 0 +#define REG_WR_ADDR_marb_bar_rw_ddr2_slots 0 + +/* Register rw_h264_rd_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_h264_rd_burst; +#define REG_RD_ADDR_marb_bar_rw_h264_rd_burst 256 +#define REG_WR_ADDR_marb_bar_rw_h264_rd_burst 256 + +/* Register rw_h264_wr_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_h264_wr_burst; +#define REG_RD_ADDR_marb_bar_rw_h264_wr_burst 260 +#define REG_WR_ADDR_marb_bar_rw_h264_wr_burst 260 + +/* Register rw_ccd_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_ccd_burst; +#define REG_RD_ADDR_marb_bar_rw_ccd_burst 264 +#define REG_WR_ADDR_marb_bar_rw_ccd_burst 264 + +/* Register rw_vin_wr_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_vin_wr_burst; +#define REG_RD_ADDR_marb_bar_rw_vin_wr_burst 268 +#define REG_WR_ADDR_marb_bar_rw_vin_wr_burst 268 + +/* Register rw_vin_rd_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_vin_rd_burst; +#define REG_RD_ADDR_marb_bar_rw_vin_rd_burst 272 +#define REG_WR_ADDR_marb_bar_rw_vin_rd_burst 272 + +/* Register rw_sclr_rd_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_sclr_rd_burst; +#define REG_RD_ADDR_marb_bar_rw_sclr_rd_burst 276 +#define REG_WR_ADDR_marb_bar_rw_sclr_rd_burst 276 + +/* Register rw_vout_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_vout_burst; +#define REG_RD_ADDR_marb_bar_rw_vout_burst 280 +#define REG_WR_ADDR_marb_bar_rw_vout_burst 280 + +/* Register rw_sclr_fifo_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_sclr_fifo_burst; +#define REG_RD_ADDR_marb_bar_rw_sclr_fifo_burst 284 +#define REG_WR_ADDR_marb_bar_rw_sclr_fifo_burst 284 + +/* Register rw_l2cache_burst, scope marb_bar, type rw */ +typedef struct { + unsigned int ddr2_bsize : 2; + unsigned int dummy1 : 30; +} reg_marb_bar_rw_l2cache_burst; +#define REG_RD_ADDR_marb_bar_rw_l2cache_burst 288 +#define REG_WR_ADDR_marb_bar_rw_l2cache_burst 288 + +/* Register rw_intr_mask, scope marb_bar, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_bar_rw_intr_mask; +#define REG_RD_ADDR_marb_bar_rw_intr_mask 292 +#define REG_WR_ADDR_marb_bar_rw_intr_mask 292 + +/* Register rw_ack_intr, scope marb_bar, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_bar_rw_ack_intr; +#define REG_RD_ADDR_marb_bar_rw_ack_intr 296 +#define REG_WR_ADDR_marb_bar_rw_ack_intr 296 + +/* Register r_intr, scope marb_bar, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_bar_r_intr; +#define REG_RD_ADDR_marb_bar_r_intr 300 + +/* Register r_masked_intr, scope marb_bar, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_bar_r_masked_intr; +#define REG_RD_ADDR_marb_bar_r_masked_intr 304 + +/* Register rw_stop_mask, scope marb_bar, type rw */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_rw_stop_mask; +#define REG_RD_ADDR_marb_bar_rw_stop_mask 308 +#define REG_WR_ADDR_marb_bar_rw_stop_mask 308 + +/* Register r_stopped, scope marb_bar, type r */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_r_stopped; +#define REG_RD_ADDR_marb_bar_r_stopped 312 + +/* Register rw_no_snoop, scope marb_bar, type rw */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_rw_no_snoop; +#define REG_RD_ADDR_marb_bar_rw_no_snoop 576 +#define REG_WR_ADDR_marb_bar_rw_no_snoop 576 + + +/* Constants */ +enum { + regk_marb_bar_ccd = 0x00000002, + regk_marb_bar_h264_rd = 0x00000000, + regk_marb_bar_h264_wr = 0x00000001, + regk_marb_bar_l2cache = 0x00000008, + regk_marb_bar_no = 0x00000000, + regk_marb_bar_r_stopped_default = 0x00000000, + regk_marb_bar_rw_ccd_burst_default = 0x00000000, + regk_marb_bar_rw_ddr2_slots_default = 0x00000000, + regk_marb_bar_rw_ddr2_slots_size = 0x00000040, + regk_marb_bar_rw_h264_rd_burst_default = 0x00000000, + regk_marb_bar_rw_h264_wr_burst_default = 0x00000000, + regk_marb_bar_rw_intr_mask_default = 0x00000000, + regk_marb_bar_rw_l2cache_burst_default = 0x00000000, + regk_marb_bar_rw_no_snoop_default = 0x00000000, + regk_marb_bar_rw_sclr_fifo_burst_default = 0x00000000, + regk_marb_bar_rw_sclr_rd_burst_default = 0x00000000, + regk_marb_bar_rw_stop_mask_default = 0x00000000, + regk_marb_bar_rw_vin_rd_burst_default = 0x00000000, + regk_marb_bar_rw_vin_wr_burst_default = 0x00000000, + regk_marb_bar_rw_vout_burst_default = 0x00000000, + regk_marb_bar_sclr_fifo = 0x00000007, + regk_marb_bar_sclr_rd = 0x00000005, + regk_marb_bar_vin_rd = 0x00000004, + regk_marb_bar_vin_wr = 0x00000003, + regk_marb_bar_vout = 0x00000006, + regk_marb_bar_yes = 0x00000001 +}; +#endif /* __marb_bar_defs_h */ +#ifndef __marb_bar_bp_defs_h +#define __marb_bar_bp_defs_h + +/* + * This file is autogenerated from + * file: marb_bar.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile marb_bar_defs.h marb_bar.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_bar_bp */ + +/* Register rw_first_addr, scope marb_bar_bp, type rw */ +typedef unsigned int reg_marb_bar_bp_rw_first_addr; +#define REG_RD_ADDR_marb_bar_bp_rw_first_addr 0 +#define REG_WR_ADDR_marb_bar_bp_rw_first_addr 0 + +/* Register rw_last_addr, scope marb_bar_bp, type rw */ +typedef unsigned int reg_marb_bar_bp_rw_last_addr; +#define REG_RD_ADDR_marb_bar_bp_rw_last_addr 4 +#define REG_WR_ADDR_marb_bar_bp_rw_last_addr 4 + +/* Register rw_op, scope marb_bar_bp, type rw */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_bar_bp_rw_op; +#define REG_RD_ADDR_marb_bar_bp_rw_op 8 +#define REG_WR_ADDR_marb_bar_bp_rw_op 8 + +/* Register rw_clients, scope marb_bar_bp, type rw */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_bp_rw_clients; +#define REG_RD_ADDR_marb_bar_bp_rw_clients 12 +#define REG_WR_ADDR_marb_bar_bp_rw_clients 12 + +/* Register rw_options, scope marb_bar_bp, type rw */ +typedef struct { + unsigned int wrap : 1; + unsigned int dummy1 : 31; +} reg_marb_bar_bp_rw_options; +#define REG_RD_ADDR_marb_bar_bp_rw_options 16 +#define REG_WR_ADDR_marb_bar_bp_rw_options 16 + +/* Register r_brk_addr, scope marb_bar_bp, type r */ +typedef unsigned int reg_marb_bar_bp_r_brk_addr; +#define REG_RD_ADDR_marb_bar_bp_r_brk_addr 20 + +/* Register r_brk_op, scope marb_bar_bp, type r */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_bar_bp_r_brk_op; +#define REG_RD_ADDR_marb_bar_bp_r_brk_op 24 + +/* Register r_brk_clients, scope marb_bar_bp, type r */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_bp_r_brk_clients; +#define REG_RD_ADDR_marb_bar_bp_r_brk_clients 28 + +/* Register r_brk_first_client, scope marb_bar_bp, type r */ +typedef struct { + unsigned int h264_rd : 1; + unsigned int h264_wr : 1; + unsigned int ccd : 1; + unsigned int vin_wr : 1; + unsigned int vin_rd : 1; + unsigned int sclr_rd : 1; + unsigned int vout : 1; + unsigned int sclr_fifo : 1; + unsigned int l2cache : 1; + unsigned int dummy1 : 23; +} reg_marb_bar_bp_r_brk_first_client; +#define REG_RD_ADDR_marb_bar_bp_r_brk_first_client 32 + +/* Register r_brk_size, scope marb_bar_bp, type r */ +typedef unsigned int reg_marb_bar_bp_r_brk_size; +#define REG_RD_ADDR_marb_bar_bp_r_brk_size 36 + +/* Register rw_ack, scope marb_bar_bp, type rw */ +typedef unsigned int reg_marb_bar_bp_rw_ack; +#define REG_RD_ADDR_marb_bar_bp_rw_ack 40 +#define REG_WR_ADDR_marb_bar_bp_rw_ack 40 + + +/* Constants */ +enum { + regk_marb_bar_bp_no = 0x00000000, + regk_marb_bar_bp_rw_op_default = 0x00000000, + regk_marb_bar_bp_rw_options_default = 0x00000000, + regk_marb_bar_bp_yes = 0x00000001 +}; +#endif /* __marb_bar_bp_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/marb_foo_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/marb_foo_defs.h new file mode 100644 index 000000000000..2baa833f109a --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/marb_foo_defs.h @@ -0,0 +1,626 @@ +#ifndef __marb_foo_defs_h +#define __marb_foo_defs_h + +/* + * This file is autogenerated from + * file: marb_foo.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile marb_foo_defs.h marb_foo.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_foo */ + +#define STRIDE_marb_foo_rw_intm_slots 4 +/* Register rw_intm_slots, scope marb_foo, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_intm_slots; +#define REG_RD_ADDR_marb_foo_rw_intm_slots 0 +#define REG_WR_ADDR_marb_foo_rw_intm_slots 0 + +#define STRIDE_marb_foo_rw_l2_slots 4 +/* Register rw_l2_slots, scope marb_foo, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_l2_slots; +#define REG_RD_ADDR_marb_foo_rw_l2_slots 256 +#define REG_WR_ADDR_marb_foo_rw_l2_slots 256 + +#define STRIDE_marb_foo_rw_regs_slots 4 +/* Register rw_regs_slots, scope marb_foo, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_regs_slots; +#define REG_RD_ADDR_marb_foo_rw_regs_slots 512 +#define REG_WR_ADDR_marb_foo_rw_regs_slots 512 + +/* Register rw_sclr_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_sclr_burst; +#define REG_RD_ADDR_marb_foo_rw_sclr_burst 528 +#define REG_WR_ADDR_marb_foo_rw_sclr_burst 528 + +/* Register rw_dma0_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma0_burst; +#define REG_RD_ADDR_marb_foo_rw_dma0_burst 532 +#define REG_WR_ADDR_marb_foo_rw_dma0_burst 532 + +/* Register rw_dma1_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma1_burst; +#define REG_RD_ADDR_marb_foo_rw_dma1_burst 536 +#define REG_WR_ADDR_marb_foo_rw_dma1_burst 536 + +/* Register rw_dma2_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma2_burst; +#define REG_RD_ADDR_marb_foo_rw_dma2_burst 540 +#define REG_WR_ADDR_marb_foo_rw_dma2_burst 540 + +/* Register rw_dma3_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma3_burst; +#define REG_RD_ADDR_marb_foo_rw_dma3_burst 544 +#define REG_WR_ADDR_marb_foo_rw_dma3_burst 544 + +/* Register rw_dma4_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma4_burst; +#define REG_RD_ADDR_marb_foo_rw_dma4_burst 548 +#define REG_WR_ADDR_marb_foo_rw_dma4_burst 548 + +/* Register rw_dma5_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma5_burst; +#define REG_RD_ADDR_marb_foo_rw_dma5_burst 552 +#define REG_WR_ADDR_marb_foo_rw_dma5_burst 552 + +/* Register rw_dma6_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma6_burst; +#define REG_RD_ADDR_marb_foo_rw_dma6_burst 556 +#define REG_WR_ADDR_marb_foo_rw_dma6_burst 556 + +/* Register rw_dma7_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma7_burst; +#define REG_RD_ADDR_marb_foo_rw_dma7_burst 560 +#define REG_WR_ADDR_marb_foo_rw_dma7_burst 560 + +/* Register rw_dma9_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma9_burst; +#define REG_RD_ADDR_marb_foo_rw_dma9_burst 564 +#define REG_WR_ADDR_marb_foo_rw_dma9_burst 564 + +/* Register rw_dma11_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_dma11_burst; +#define REG_RD_ADDR_marb_foo_rw_dma11_burst 568 +#define REG_WR_ADDR_marb_foo_rw_dma11_burst 568 + +/* Register rw_cpui_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_cpui_burst; +#define REG_RD_ADDR_marb_foo_rw_cpui_burst 572 +#define REG_WR_ADDR_marb_foo_rw_cpui_burst 572 + +/* Register rw_cpud_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_cpud_burst; +#define REG_RD_ADDR_marb_foo_rw_cpud_burst 576 +#define REG_WR_ADDR_marb_foo_rw_cpud_burst 576 + +/* Register rw_iop_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_iop_burst; +#define REG_RD_ADDR_marb_foo_rw_iop_burst 580 +#define REG_WR_ADDR_marb_foo_rw_iop_burst 580 + +/* Register rw_ccdstat_burst, scope marb_foo, type rw */ +typedef struct { + unsigned int intm_bsize : 2; + unsigned int l2_bsize : 2; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_ccdstat_burst; +#define REG_RD_ADDR_marb_foo_rw_ccdstat_burst 584 +#define REG_WR_ADDR_marb_foo_rw_ccdstat_burst 584 + +/* Register rw_intr_mask, scope marb_foo, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_intr_mask; +#define REG_RD_ADDR_marb_foo_rw_intr_mask 588 +#define REG_WR_ADDR_marb_foo_rw_intr_mask 588 + +/* Register rw_ack_intr, scope marb_foo, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_foo_rw_ack_intr; +#define REG_RD_ADDR_marb_foo_rw_ack_intr 592 +#define REG_WR_ADDR_marb_foo_rw_ack_intr 592 + +/* Register r_intr, scope marb_foo, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_foo_r_intr; +#define REG_RD_ADDR_marb_foo_r_intr 596 + +/* Register r_masked_intr, scope marb_foo, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_foo_r_masked_intr; +#define REG_RD_ADDR_marb_foo_r_masked_intr 600 + +/* Register rw_stop_mask, scope marb_foo, type rw */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_rw_stop_mask; +#define REG_RD_ADDR_marb_foo_rw_stop_mask 604 +#define REG_WR_ADDR_marb_foo_rw_stop_mask 604 + +/* Register r_stopped, scope marb_foo, type r */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_r_stopped; +#define REG_RD_ADDR_marb_foo_r_stopped 608 + +/* Register rw_no_snoop, scope marb_foo, type rw */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_rw_no_snoop; +#define REG_RD_ADDR_marb_foo_rw_no_snoop 896 +#define REG_WR_ADDR_marb_foo_rw_no_snoop 896 + +/* Register rw_no_snoop_rq, scope marb_foo, type rw */ +typedef struct { + unsigned int dummy1 : 11; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int dummy2 : 19; +} reg_marb_foo_rw_no_snoop_rq; +#define REG_RD_ADDR_marb_foo_rw_no_snoop_rq 900 +#define REG_WR_ADDR_marb_foo_rw_no_snoop_rq 900 + + +/* Constants */ +enum { + regk_marb_foo_ccdstat = 0x0000000e, + regk_marb_foo_cpud = 0x0000000c, + regk_marb_foo_cpui = 0x0000000b, + regk_marb_foo_dma0 = 0x00000001, + regk_marb_foo_dma1 = 0x00000002, + regk_marb_foo_dma11 = 0x0000000a, + regk_marb_foo_dma2 = 0x00000003, + regk_marb_foo_dma3 = 0x00000004, + regk_marb_foo_dma4 = 0x00000005, + regk_marb_foo_dma5 = 0x00000006, + regk_marb_foo_dma6 = 0x00000007, + regk_marb_foo_dma7 = 0x00000008, + regk_marb_foo_dma9 = 0x00000009, + regk_marb_foo_iop = 0x0000000d, + regk_marb_foo_no = 0x00000000, + regk_marb_foo_r_stopped_default = 0x00000000, + regk_marb_foo_rw_ccdstat_burst_default = 0x00000000, + regk_marb_foo_rw_cpud_burst_default = 0x00000000, + regk_marb_foo_rw_cpui_burst_default = 0x00000000, + regk_marb_foo_rw_dma0_burst_default = 0x00000000, + regk_marb_foo_rw_dma11_burst_default = 0x00000000, + regk_marb_foo_rw_dma1_burst_default = 0x00000000, + regk_marb_foo_rw_dma2_burst_default = 0x00000000, + regk_marb_foo_rw_dma3_burst_default = 0x00000000, + regk_marb_foo_rw_dma4_burst_default = 0x00000000, + regk_marb_foo_rw_dma5_burst_default = 0x00000000, + regk_marb_foo_rw_dma6_burst_default = 0x00000000, + regk_marb_foo_rw_dma7_burst_default = 0x00000000, + regk_marb_foo_rw_dma9_burst_default = 0x00000000, + regk_marb_foo_rw_intm_slots_default = 0x00000000, + regk_marb_foo_rw_intm_slots_size = 0x00000040, + regk_marb_foo_rw_intr_mask_default = 0x00000000, + regk_marb_foo_rw_iop_burst_default = 0x00000000, + regk_marb_foo_rw_l2_slots_default = 0x00000000, + regk_marb_foo_rw_l2_slots_size = 0x00000040, + regk_marb_foo_rw_no_snoop_default = 0x00000000, + regk_marb_foo_rw_no_snoop_rq_default = 0x00000000, + regk_marb_foo_rw_regs_slots_default = 0x00000000, + regk_marb_foo_rw_regs_slots_size = 0x00000004, + regk_marb_foo_rw_sclr_burst_default = 0x00000000, + regk_marb_foo_rw_stop_mask_default = 0x00000000, + regk_marb_foo_sclr = 0x00000000, + regk_marb_foo_yes = 0x00000001 +}; +#endif /* __marb_foo_defs_h */ +#ifndef __marb_foo_bp_defs_h +#define __marb_foo_bp_defs_h + +/* + * This file is autogenerated from + * file: marb_foo.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile marb_foo_defs.h marb_foo.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_foo_bp */ + +/* Register rw_first_addr, scope marb_foo_bp, type rw */ +typedef unsigned int reg_marb_foo_bp_rw_first_addr; +#define REG_RD_ADDR_marb_foo_bp_rw_first_addr 0 +#define REG_WR_ADDR_marb_foo_bp_rw_first_addr 0 + +/* Register rw_last_addr, scope marb_foo_bp, type rw */ +typedef unsigned int reg_marb_foo_bp_rw_last_addr; +#define REG_RD_ADDR_marb_foo_bp_rw_last_addr 4 +#define REG_WR_ADDR_marb_foo_bp_rw_last_addr 4 + +/* Register rw_op, scope marb_foo_bp, type rw */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_foo_bp_rw_op; +#define REG_RD_ADDR_marb_foo_bp_rw_op 8 +#define REG_WR_ADDR_marb_foo_bp_rw_op 8 + +/* Register rw_clients, scope marb_foo_bp, type rw */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_bp_rw_clients; +#define REG_RD_ADDR_marb_foo_bp_rw_clients 12 +#define REG_WR_ADDR_marb_foo_bp_rw_clients 12 + +/* Register rw_options, scope marb_foo_bp, type rw */ +typedef struct { + unsigned int wrap : 1; + unsigned int dummy1 : 31; +} reg_marb_foo_bp_rw_options; +#define REG_RD_ADDR_marb_foo_bp_rw_options 16 +#define REG_WR_ADDR_marb_foo_bp_rw_options 16 + +/* Register r_brk_addr, scope marb_foo_bp, type r */ +typedef unsigned int reg_marb_foo_bp_r_brk_addr; +#define REG_RD_ADDR_marb_foo_bp_r_brk_addr 20 + +/* Register r_brk_op, scope marb_foo_bp, type r */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_foo_bp_r_brk_op; +#define REG_RD_ADDR_marb_foo_bp_r_brk_op 24 + +/* Register r_brk_clients, scope marb_foo_bp, type r */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_bp_r_brk_clients; +#define REG_RD_ADDR_marb_foo_bp_r_brk_clients 28 + +/* Register r_brk_first_client, scope marb_foo_bp, type r */ +typedef struct { + unsigned int sclr : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma9 : 1; + unsigned int dma11 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int ccdstat : 1; + unsigned int dummy1 : 17; +} reg_marb_foo_bp_r_brk_first_client; +#define REG_RD_ADDR_marb_foo_bp_r_brk_first_client 32 + +/* Register r_brk_size, scope marb_foo_bp, type r */ +typedef unsigned int reg_marb_foo_bp_r_brk_size; +#define REG_RD_ADDR_marb_foo_bp_r_brk_size 36 + +/* Register rw_ack, scope marb_foo_bp, type rw */ +typedef unsigned int reg_marb_foo_bp_rw_ack; +#define REG_RD_ADDR_marb_foo_bp_rw_ack 40 +#define REG_WR_ADDR_marb_foo_bp_rw_ack 40 + + +/* Constants */ +enum { + regk_marb_foo_bp_no = 0x00000000, + regk_marb_foo_bp_rw_op_default = 0x00000000, + regk_marb_foo_bp_rw_options_default = 0x00000000, + regk_marb_foo_bp_yes = 0x00000001 +}; +#endif /* __marb_foo_bp_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/pinmux_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/pinmux_defs.h new file mode 100644 index 000000000000..4b96cd2cba8a --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/pinmux_defs.h @@ -0,0 +1,312 @@ +#ifndef __pinmux_defs_h +#define __pinmux_defs_h + +/* + * This file is autogenerated from + * file: pinmux.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile pinmux_defs.h pinmux.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope pinmux */ + +/* Register rw_hwprot, scope pinmux, type rw */ +typedef struct { + unsigned int eth : 1; + unsigned int eth_mdio : 1; + unsigned int geth : 1; + unsigned int tg : 1; + unsigned int tg_clk : 1; + unsigned int vout : 1; + unsigned int vout_sync : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int ser4 : 1; + unsigned int sser : 1; + unsigned int pwm0 : 1; + unsigned int pwm1 : 1; + unsigned int pwm2 : 1; + unsigned int timer0 : 1; + unsigned int timer1 : 1; + unsigned int pio : 1; + unsigned int i2c0 : 1; + unsigned int i2c1 : 1; + unsigned int i2c1_sda1 : 1; + unsigned int i2c1_sda2 : 1; + unsigned int i2c1_sda3 : 1; + unsigned int i2c1_sen : 1; + unsigned int dummy1 : 8; +} reg_pinmux_rw_hwprot; +#define REG_RD_ADDR_pinmux_rw_hwprot 0 +#define REG_WR_ADDR_pinmux_rw_hwprot 0 + +/* Register rw_gio_pa, scope pinmux, type rw */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int pa8 : 1; + unsigned int pa9 : 1; + unsigned int pa10 : 1; + unsigned int pa11 : 1; + unsigned int pa12 : 1; + unsigned int pa13 : 1; + unsigned int pa14 : 1; + unsigned int pa15 : 1; + unsigned int pa16 : 1; + unsigned int pa17 : 1; + unsigned int pa18 : 1; + unsigned int pa19 : 1; + unsigned int pa20 : 1; + unsigned int pa21 : 1; + unsigned int pa22 : 1; + unsigned int pa23 : 1; + unsigned int pa24 : 1; + unsigned int pa25 : 1; + unsigned int pa26 : 1; + unsigned int pa27 : 1; + unsigned int pa28 : 1; + unsigned int pa29 : 1; + unsigned int pa30 : 1; + unsigned int pa31 : 1; +} reg_pinmux_rw_gio_pa; +#define REG_RD_ADDR_pinmux_rw_gio_pa 4 +#define REG_WR_ADDR_pinmux_rw_gio_pa 4 + +/* Register rw_gio_pb, scope pinmux, type rw */ +typedef struct { + unsigned int pb0 : 1; + unsigned int pb1 : 1; + unsigned int pb2 : 1; + unsigned int pb3 : 1; + unsigned int pb4 : 1; + unsigned int pb5 : 1; + unsigned int pb6 : 1; + unsigned int pb7 : 1; + unsigned int pb8 : 1; + unsigned int pb9 : 1; + unsigned int pb10 : 1; + unsigned int pb11 : 1; + unsigned int pb12 : 1; + unsigned int pb13 : 1; + unsigned int pb14 : 1; + unsigned int pb15 : 1; + unsigned int pb16 : 1; + unsigned int pb17 : 1; + unsigned int pb18 : 1; + unsigned int pb19 : 1; + unsigned int pb20 : 1; + unsigned int pb21 : 1; + unsigned int pb22 : 1; + unsigned int pb23 : 1; + unsigned int pb24 : 1; + unsigned int pb25 : 1; + unsigned int pb26 : 1; + unsigned int pb27 : 1; + unsigned int pb28 : 1; + unsigned int pb29 : 1; + unsigned int pb30 : 1; + unsigned int pb31 : 1; +} reg_pinmux_rw_gio_pb; +#define REG_RD_ADDR_pinmux_rw_gio_pb 8 +#define REG_WR_ADDR_pinmux_rw_gio_pb 8 + +/* Register rw_gio_pc, scope pinmux, type rw */ +typedef struct { + unsigned int pc0 : 1; + unsigned int pc1 : 1; + unsigned int pc2 : 1; + unsigned int pc3 : 1; + unsigned int pc4 : 1; + unsigned int pc5 : 1; + unsigned int pc6 : 1; + unsigned int pc7 : 1; + unsigned int pc8 : 1; + unsigned int pc9 : 1; + unsigned int pc10 : 1; + unsigned int pc11 : 1; + unsigned int pc12 : 1; + unsigned int pc13 : 1; + unsigned int pc14 : 1; + unsigned int pc15 : 1; + unsigned int dummy1 : 16; +} reg_pinmux_rw_gio_pc; +#define REG_RD_ADDR_pinmux_rw_gio_pc 12 +#define REG_WR_ADDR_pinmux_rw_gio_pc 12 + +/* Register rw_iop_pa, scope pinmux, type rw */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int pa8 : 1; + unsigned int pa9 : 1; + unsigned int pa10 : 1; + unsigned int pa11 : 1; + unsigned int pa12 : 1; + unsigned int pa13 : 1; + unsigned int pa14 : 1; + unsigned int pa15 : 1; + unsigned int pa16 : 1; + unsigned int pa17 : 1; + unsigned int pa18 : 1; + unsigned int pa19 : 1; + unsigned int pa20 : 1; + unsigned int pa21 : 1; + unsigned int pa22 : 1; + unsigned int pa23 : 1; + unsigned int pa24 : 1; + unsigned int pa25 : 1; + unsigned int pa26 : 1; + unsigned int pa27 : 1; + unsigned int pa28 : 1; + unsigned int pa29 : 1; + unsigned int pa30 : 1; + unsigned int pa31 : 1; +} reg_pinmux_rw_iop_pa; +#define REG_RD_ADDR_pinmux_rw_iop_pa 16 +#define REG_WR_ADDR_pinmux_rw_iop_pa 16 + +/* Register rw_iop_pb, scope pinmux, type rw */ +typedef struct { + unsigned int pb0 : 1; + unsigned int pb1 : 1; + unsigned int pb2 : 1; + unsigned int pb3 : 1; + unsigned int pb4 : 1; + unsigned int pb5 : 1; + unsigned int pb6 : 1; + unsigned int pb7 : 1; + unsigned int dummy1 : 24; +} reg_pinmux_rw_iop_pb; +#define REG_RD_ADDR_pinmux_rw_iop_pb 20 +#define REG_WR_ADDR_pinmux_rw_iop_pb 20 + +/* Register rw_iop_pio, scope pinmux, type rw */ +typedef struct { + unsigned int d0 : 1; + unsigned int d1 : 1; + unsigned int d2 : 1; + unsigned int d3 : 1; + unsigned int d4 : 1; + unsigned int d5 : 1; + unsigned int d6 : 1; + unsigned int d7 : 1; + unsigned int rd_n : 1; + unsigned int wr_n : 1; + unsigned int a0 : 1; + unsigned int a1 : 1; + unsigned int ce0_n : 1; + unsigned int ce1_n : 1; + unsigned int ce2_n : 1; + unsigned int rdy : 1; + unsigned int dummy1 : 16; +} reg_pinmux_rw_iop_pio; +#define REG_RD_ADDR_pinmux_rw_iop_pio 24 +#define REG_WR_ADDR_pinmux_rw_iop_pio 24 + +/* Register rw_iop_usb, scope pinmux, type rw */ +typedef struct { + unsigned int usb0 : 1; + unsigned int dummy1 : 31; +} reg_pinmux_rw_iop_usb; +#define REG_RD_ADDR_pinmux_rw_iop_usb 28 +#define REG_WR_ADDR_pinmux_rw_iop_usb 28 + + +/* Constants */ +enum { + regk_pinmux_no = 0x00000000, + regk_pinmux_rw_gio_pa_default = 0x00000000, + regk_pinmux_rw_gio_pb_default = 0x00000000, + regk_pinmux_rw_gio_pc_default = 0x00000000, + regk_pinmux_rw_hwprot_default = 0x00000000, + regk_pinmux_rw_iop_pa_default = 0x00000000, + regk_pinmux_rw_iop_pb_default = 0x00000000, + regk_pinmux_rw_iop_pio_default = 0x00000000, + regk_pinmux_rw_iop_usb_default = 0x00000001, + regk_pinmux_yes = 0x00000001 +}; +#endif /* __pinmux_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/pio_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/pio_defs.h new file mode 100644 index 000000000000..2d8e4b4cc602 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/pio_defs.h @@ -0,0 +1,371 @@ +#ifndef __pio_defs_h +#define __pio_defs_h + +/* + * This file is autogenerated from + * file: pio.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile pio_defs.h pio.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope pio */ + +/* Register rw_data, scope pio, type rw */ +typedef unsigned int reg_pio_rw_data; +#define REG_RD_ADDR_pio_rw_data 64 +#define REG_WR_ADDR_pio_rw_data 64 + +/* Register rw_io_access0, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access0; +#define REG_RD_ADDR_pio_rw_io_access0 0 +#define REG_WR_ADDR_pio_rw_io_access0 0 + +/* Register rw_io_access1, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access1; +#define REG_RD_ADDR_pio_rw_io_access1 4 +#define REG_WR_ADDR_pio_rw_io_access1 4 + +/* Register rw_io_access2, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access2; +#define REG_RD_ADDR_pio_rw_io_access2 8 +#define REG_WR_ADDR_pio_rw_io_access2 8 + +/* Register rw_io_access3, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access3; +#define REG_RD_ADDR_pio_rw_io_access3 12 +#define REG_WR_ADDR_pio_rw_io_access3 12 + +/* Register rw_io_access4, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access4; +#define REG_RD_ADDR_pio_rw_io_access4 16 +#define REG_WR_ADDR_pio_rw_io_access4 16 + +/* Register rw_io_access5, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access5; +#define REG_RD_ADDR_pio_rw_io_access5 20 +#define REG_WR_ADDR_pio_rw_io_access5 20 + +/* Register rw_io_access6, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access6; +#define REG_RD_ADDR_pio_rw_io_access6 24 +#define REG_WR_ADDR_pio_rw_io_access6 24 + +/* Register rw_io_access7, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access7; +#define REG_RD_ADDR_pio_rw_io_access7 28 +#define REG_WR_ADDR_pio_rw_io_access7 28 + +/* Register rw_io_access8, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access8; +#define REG_RD_ADDR_pio_rw_io_access8 32 +#define REG_WR_ADDR_pio_rw_io_access8 32 + +/* Register rw_io_access9, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access9; +#define REG_RD_ADDR_pio_rw_io_access9 36 +#define REG_WR_ADDR_pio_rw_io_access9 36 + +/* Register rw_io_access10, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access10; +#define REG_RD_ADDR_pio_rw_io_access10 40 +#define REG_WR_ADDR_pio_rw_io_access10 40 + +/* Register rw_io_access11, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access11; +#define REG_RD_ADDR_pio_rw_io_access11 44 +#define REG_WR_ADDR_pio_rw_io_access11 44 + +/* Register rw_io_access12, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access12; +#define REG_RD_ADDR_pio_rw_io_access12 48 +#define REG_WR_ADDR_pio_rw_io_access12 48 + +/* Register rw_io_access13, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access13; +#define REG_RD_ADDR_pio_rw_io_access13 52 +#define REG_WR_ADDR_pio_rw_io_access13 52 + +/* Register rw_io_access14, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access14; +#define REG_RD_ADDR_pio_rw_io_access14 56 +#define REG_WR_ADDR_pio_rw_io_access14 56 + +/* Register rw_io_access15, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_pio_rw_io_access15; +#define REG_RD_ADDR_pio_rw_io_access15 60 +#define REG_WR_ADDR_pio_rw_io_access15 60 + +/* Register rw_ce0_cfg, scope pio, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int mode : 2; + unsigned int dummy1 : 16; +} reg_pio_rw_ce0_cfg; +#define REG_RD_ADDR_pio_rw_ce0_cfg 68 +#define REG_WR_ADDR_pio_rw_ce0_cfg 68 + +/* Register rw_ce1_cfg, scope pio, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int mode : 2; + unsigned int dummy1 : 16; +} reg_pio_rw_ce1_cfg; +#define REG_RD_ADDR_pio_rw_ce1_cfg 72 +#define REG_WR_ADDR_pio_rw_ce1_cfg 72 + +/* Register rw_ce2_cfg, scope pio, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int mode : 2; + unsigned int dummy1 : 16; +} reg_pio_rw_ce2_cfg; +#define REG_RD_ADDR_pio_rw_ce2_cfg 76 +#define REG_WR_ADDR_pio_rw_ce2_cfg 76 + +/* Register rw_dout, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int rd_n : 1; + unsigned int wr_n : 1; + unsigned int a0 : 1; + unsigned int a1 : 1; + unsigned int ce0_n : 1; + unsigned int ce1_n : 1; + unsigned int ce2_n : 1; + unsigned int rdy : 1; + unsigned int dummy1 : 16; +} reg_pio_rw_dout; +#define REG_RD_ADDR_pio_rw_dout 80 +#define REG_WR_ADDR_pio_rw_dout 80 + +/* Register rw_oe, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int rd_n : 1; + unsigned int wr_n : 1; + unsigned int a0 : 1; + unsigned int a1 : 1; + unsigned int ce0_n : 1; + unsigned int ce1_n : 1; + unsigned int ce2_n : 1; + unsigned int rdy : 1; + unsigned int dummy1 : 16; +} reg_pio_rw_oe; +#define REG_RD_ADDR_pio_rw_oe 84 +#define REG_WR_ADDR_pio_rw_oe 84 + +/* Register rw_man_ctrl, scope pio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int rd_n : 1; + unsigned int wr_n : 1; + unsigned int a0 : 1; + unsigned int a1 : 1; + unsigned int ce0_n : 1; + unsigned int ce1_n : 1; + unsigned int ce2_n : 1; + unsigned int rdy : 1; + unsigned int dummy1 : 16; +} reg_pio_rw_man_ctrl; +#define REG_RD_ADDR_pio_rw_man_ctrl 88 +#define REG_WR_ADDR_pio_rw_man_ctrl 88 + +/* Register r_din, scope pio, type r */ +typedef struct { + unsigned int data : 8; + unsigned int rd_n : 1; + unsigned int wr_n : 1; + unsigned int a0 : 1; + unsigned int a1 : 1; + unsigned int ce0_n : 1; + unsigned int ce1_n : 1; + unsigned int ce2_n : 1; + unsigned int rdy : 1; + unsigned int dummy1 : 16; +} reg_pio_r_din; +#define REG_RD_ADDR_pio_r_din 92 + +/* Register r_stat, scope pio, type r */ +typedef struct { + unsigned int busy : 1; + unsigned int dummy1 : 31; +} reg_pio_r_stat; +#define REG_RD_ADDR_pio_r_stat 96 + +/* Register rw_intr_mask, scope pio, type rw */ +typedef struct { + unsigned int rdy : 1; + unsigned int dummy1 : 31; +} reg_pio_rw_intr_mask; +#define REG_RD_ADDR_pio_rw_intr_mask 100 +#define REG_WR_ADDR_pio_rw_intr_mask 100 + +/* Register rw_ack_intr, scope pio, type rw */ +typedef struct { + unsigned int rdy : 1; + unsigned int dummy1 : 31; +} reg_pio_rw_ack_intr; +#define REG_RD_ADDR_pio_rw_ack_intr 104 +#define REG_WR_ADDR_pio_rw_ack_intr 104 + +/* Register r_intr, scope pio, type r */ +typedef struct { + unsigned int rdy : 1; + unsigned int dummy1 : 31; +} reg_pio_r_intr; +#define REG_RD_ADDR_pio_r_intr 108 + +/* Register r_masked_intr, scope pio, type r */ +typedef struct { + unsigned int rdy : 1; + unsigned int dummy1 : 31; +} reg_pio_r_masked_intr; +#define REG_RD_ADDR_pio_r_masked_intr 112 + + +/* Constants */ +enum { + regk_pio_a2 = 0x00000003, + regk_pio_no = 0x00000000, + regk_pio_normal = 0x00000000, + regk_pio_rd = 0x00000001, + regk_pio_rw_ce0_cfg_default = 0x00000000, + regk_pio_rw_ce1_cfg_default = 0x00000000, + regk_pio_rw_ce2_cfg_default = 0x00000000, + regk_pio_rw_intr_mask_default = 0x00000000, + regk_pio_rw_man_ctrl_default = 0x00000000, + regk_pio_rw_oe_default = 0x00000000, + regk_pio_wr = 0x00000002, + regk_pio_wr_ce2 = 0x00000003, + regk_pio_yes = 0x00000001, + regk_pio_yes_all = 0x000000ff +}; +#endif /* __pio_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/reg_map.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/reg_map.h new file mode 100644 index 000000000000..36e59d6e96b6 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/reg_map.h @@ -0,0 +1,103 @@ +#ifndef __reg_map_h +#define __reg_map_h + +/* + * This file is autogenerated from + * file: reg.rmap + * + * by ../../../tools/rdesc/bin/rdes2c -base 0xb0000000 -map marb_bar.r marb_foo.r ccd_top.r ccd_stat.r ccd_tg.r ccd_dp.r ccd.r iop_sap_in.r iop_sap_out.r iop_sw_cfg.r iop_sw_cpu.r iop_sw_mpu.r iop_sw_spu.r iop_version.r iop_crc_par.r iop_dmc_in.r iop_dmc_out.r iop_fifo_in_extra.r iop_fifo_in.r iop_fifo_out_extra.r iop_fifo_out.r iop_mc.r iop_mpu.r iop_scrc_in.r iop_scrc_out.r iop_spu.r iop_timer_grp.r iop_trigger_grp.r iop.r -outfile reg_map.h reg.rmap + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +typedef enum { + regi_ccd = 0xb0000000, + regi_ccd_top = 0xb0000000, + regi_ccd_dp = 0xb0000400, + regi_ccd_stat = 0xb0000800, + regi_ccd_tg = 0xb0001000, + regi_cfg = 0xb0002000, + regi_clkgen = 0xb0004000, + regi_ddr2_ctrl = 0xb0006000, + regi_dma0 = 0xb0008000, + regi_dma1 = 0xb000a000, + regi_dma11 = 0xb000c000, + regi_dma2 = 0xb000e000, + regi_dma3 = 0xb0010000, + regi_dma4 = 0xb0012000, + regi_dma5 = 0xb0014000, + regi_dma6 = 0xb0016000, + regi_dma7 = 0xb0018000, + regi_dma9 = 0xb001a000, + regi_eth = 0xb001c000, + regi_gio = 0xb0020000, + regi_h264 = 0xb0022000, + regi_hist = 0xb0026000, + regi_iop = 0xb0028000, + regi_iop_version = 0xb0028000, + regi_iop_fifo_in_extra = 0xb0028040, + regi_iop_fifo_out_extra = 0xb0028080, + regi_iop_trigger_grp0 = 0xb00280c0, + regi_iop_trigger_grp1 = 0xb0028100, + regi_iop_trigger_grp2 = 0xb0028140, + regi_iop_trigger_grp3 = 0xb0028180, + regi_iop_trigger_grp4 = 0xb00281c0, + regi_iop_trigger_grp5 = 0xb0028200, + regi_iop_trigger_grp6 = 0xb0028240, + regi_iop_trigger_grp7 = 0xb0028280, + regi_iop_crc_par = 0xb0028300, + regi_iop_dmc_in = 0xb0028380, + regi_iop_dmc_out = 0xb0028400, + regi_iop_fifo_in = 0xb0028480, + regi_iop_fifo_out = 0xb0028500, + regi_iop_scrc_in = 0xb0028580, + regi_iop_scrc_out = 0xb0028600, + regi_iop_timer_grp0 = 0xb0028680, + regi_iop_timer_grp1 = 0xb0028700, + regi_iop_sap_in = 0xb0028800, + regi_iop_sap_out = 0xb0028900, + regi_iop_spu = 0xb0028a00, + regi_iop_sw_cfg = 0xb0028b00, + regi_iop_sw_cpu = 0xb0028c00, + regi_iop_sw_mpu = 0xb0028d00, + regi_iop_sw_spu = 0xb0028e00, + regi_iop_mpu = 0xb0029000, + regi_irq = 0xb002a000, + regi_irq2 = 0xb006a000, + regi_jpeg = 0xb002c000, + regi_l2cache = 0xb0030000, + regi_marb_bar = 0xb0032000, + regi_marb_bar_bp0 = 0xb0032140, + regi_marb_bar_bp1 = 0xb0032180, + regi_marb_bar_bp2 = 0xb00321c0, + regi_marb_bar_bp3 = 0xb0032200, + regi_marb_foo = 0xb0034000, + regi_marb_foo_bp0 = 0xb0034280, + regi_marb_foo_bp1 = 0xb00342c0, + regi_marb_foo_bp2 = 0xb0034300, + regi_marb_foo_bp3 = 0xb0034340, + regi_pinmux = 0xb0038000, + regi_pio = 0xb0036000, + regi_sclr = 0xb003a000, + regi_sclr_fifo = 0xb003c000, + regi_ser0 = 0xb003e000, + regi_ser1 = 0xb0040000, + regi_ser2 = 0xb0042000, + regi_ser3 = 0xb0044000, + regi_ser4 = 0xb0046000, + regi_sser = 0xb0048000, + regi_strcop = 0xb004a000, + regi_strdma0 = 0xb004e000, + regi_strdma1 = 0xb0050000, + regi_strdma2 = 0xb0052000, + regi_strdma3 = 0xb0054000, + regi_strdma5 = 0xb0056000, + regi_strmux = 0xb004c000, + regi_timer0 = 0xb0058000, + regi_timer1 = 0xb005a000, + regi_timer2 = 0xb006e000, + regi_trace = 0xb005c000, + regi_vin = 0xb005e000, + regi_vout = 0xb0060000 +} reg_scope_instances; +#endif /* __reg_map_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/strmux_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/strmux_defs.h new file mode 100644 index 000000000000..14f718a4ecc3 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/strmux_defs.h @@ -0,0 +1,120 @@ +#ifndef __strmux_defs_h +#define __strmux_defs_h + +/* + * This file is autogenerated from + * file: strmux.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile strmux_defs.h strmux.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope strmux */ + +/* Register rw_cfg, scope strmux, type rw */ +typedef struct { + unsigned int dma0 : 2; + unsigned int dma1 : 2; + unsigned int dma2 : 2; + unsigned int dma3 : 2; + unsigned int dma4 : 2; + unsigned int dma5 : 2; + unsigned int dma6 : 2; + unsigned int dma7 : 2; + unsigned int dummy1 : 2; + unsigned int dma9 : 2; + unsigned int dummy2 : 2; + unsigned int dma11 : 2; + unsigned int dummy3 : 8; +} reg_strmux_rw_cfg; +#define REG_RD_ADDR_strmux_rw_cfg 0 +#define REG_WR_ADDR_strmux_rw_cfg 0 + + +/* Constants */ +enum { + regk_strmux_eth = 0x00000001, + regk_strmux_h264 = 0x00000001, + regk_strmux_iop = 0x00000001, + regk_strmux_jpeg = 0x00000001, + regk_strmux_off = 0x00000000, + regk_strmux_rw_cfg_default = 0x00000000, + regk_strmux_ser0 = 0x00000002, + regk_strmux_ser1 = 0x00000002, + regk_strmux_ser2 = 0x00000002, + regk_strmux_ser3 = 0x00000002, + regk_strmux_ser4 = 0x00000002, + regk_strmux_sser = 0x00000001, + regk_strmux_strcop = 0x00000001 +}; +#endif /* __strmux_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/hwregs/timer_defs.h b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/timer_defs.h new file mode 100644 index 000000000000..2c33e097d60a --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/hwregs/timer_defs.h @@ -0,0 +1,265 @@ +#ifndef __timer_defs_h +#define __timer_defs_h + +/* + * This file is autogenerated from + * file: timer.r + * + * by ../../../tools/rdesc/bin/rdes2c -outfile timer_defs.h timer.r + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope timer */ + +/* Register rw_tmr0_div, scope timer, type rw */ +typedef unsigned int reg_timer_rw_tmr0_div; +#define REG_RD_ADDR_timer_rw_tmr0_div 0 +#define REG_WR_ADDR_timer_rw_tmr0_div 0 + +/* Register r_tmr0_data, scope timer, type r */ +typedef unsigned int reg_timer_r_tmr0_data; +#define REG_RD_ADDR_timer_r_tmr0_data 4 + +/* Register rw_tmr0_ctrl, scope timer, type rw */ +typedef struct { + unsigned int op : 2; + unsigned int freq : 3; + unsigned int dummy1 : 27; +} reg_timer_rw_tmr0_ctrl; +#define REG_RD_ADDR_timer_rw_tmr0_ctrl 8 +#define REG_WR_ADDR_timer_rw_tmr0_ctrl 8 + +/* Register rw_tmr1_div, scope timer, type rw */ +typedef unsigned int reg_timer_rw_tmr1_div; +#define REG_RD_ADDR_timer_rw_tmr1_div 16 +#define REG_WR_ADDR_timer_rw_tmr1_div 16 + +/* Register r_tmr1_data, scope timer, type r */ +typedef unsigned int reg_timer_r_tmr1_data; +#define REG_RD_ADDR_timer_r_tmr1_data 20 + +/* Register rw_tmr1_ctrl, scope timer, type rw */ +typedef struct { + unsigned int op : 2; + unsigned int freq : 3; + unsigned int dummy1 : 27; +} reg_timer_rw_tmr1_ctrl; +#define REG_RD_ADDR_timer_rw_tmr1_ctrl 24 +#define REG_WR_ADDR_timer_rw_tmr1_ctrl 24 + +/* Register rs_cnt_data, scope timer, type rs */ +typedef struct { + unsigned int tmr : 24; + unsigned int cnt : 8; +} reg_timer_rs_cnt_data; +#define REG_RD_ADDR_timer_rs_cnt_data 32 + +/* Register r_cnt_data, scope timer, type r */ +typedef struct { + unsigned int tmr : 24; + unsigned int cnt : 8; +} reg_timer_r_cnt_data; +#define REG_RD_ADDR_timer_r_cnt_data 36 + +/* Register rw_cnt_cfg, scope timer, type rw */ +typedef struct { + unsigned int clk : 2; + unsigned int dummy1 : 30; +} reg_timer_rw_cnt_cfg; +#define REG_RD_ADDR_timer_rw_cnt_cfg 40 +#define REG_WR_ADDR_timer_rw_cnt_cfg 40 + +/* Register rw_trig, scope timer, type rw */ +typedef unsigned int reg_timer_rw_trig; +#define REG_RD_ADDR_timer_rw_trig 48 +#define REG_WR_ADDR_timer_rw_trig 48 + +/* Register rw_trig_cfg, scope timer, type rw */ +typedef struct { + unsigned int tmr : 2; + unsigned int dummy1 : 30; +} reg_timer_rw_trig_cfg; +#define REG_RD_ADDR_timer_rw_trig_cfg 52 +#define REG_WR_ADDR_timer_rw_trig_cfg 52 + +/* Register r_time, scope timer, type r */ +typedef unsigned int reg_timer_r_time; +#define REG_RD_ADDR_timer_r_time 56 + +/* Register rw_out, scope timer, type rw */ +typedef struct { + unsigned int tmr : 2; + unsigned int dummy1 : 30; +} reg_timer_rw_out; +#define REG_RD_ADDR_timer_rw_out 60 +#define REG_WR_ADDR_timer_rw_out 60 + +/* Register rw_wd_ctrl, scope timer, type rw */ +typedef struct { + unsigned int cnt : 8; + unsigned int cmd : 1; + unsigned int key : 7; + unsigned int dummy1 : 16; +} reg_timer_rw_wd_ctrl; +#define REG_RD_ADDR_timer_rw_wd_ctrl 64 +#define REG_WR_ADDR_timer_rw_wd_ctrl 64 + +/* Register r_wd_stat, scope timer, type r */ +typedef struct { + unsigned int cnt : 8; + unsigned int cmd : 1; + unsigned int dummy1 : 23; +} reg_timer_r_wd_stat; +#define REG_RD_ADDR_timer_r_wd_stat 68 + +/* Register rw_intr_mask, scope timer, type rw */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_rw_intr_mask; +#define REG_RD_ADDR_timer_rw_intr_mask 72 +#define REG_WR_ADDR_timer_rw_intr_mask 72 + +/* Register rw_ack_intr, scope timer, type rw */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_rw_ack_intr; +#define REG_RD_ADDR_timer_rw_ack_intr 76 +#define REG_WR_ADDR_timer_rw_ack_intr 76 + +/* Register r_intr, scope timer, type r */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_r_intr; +#define REG_RD_ADDR_timer_r_intr 80 + +/* Register r_masked_intr, scope timer, type r */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_r_masked_intr; +#define REG_RD_ADDR_timer_r_masked_intr 84 + +/* Register rw_test, scope timer, type rw */ +typedef struct { + unsigned int dis : 1; + unsigned int en : 1; + unsigned int dummy1 : 30; +} reg_timer_rw_test; +#define REG_RD_ADDR_timer_rw_test 88 +#define REG_WR_ADDR_timer_rw_test 88 + + +/* Constants */ +enum { + regk_timer_ext = 0x00000001, + regk_timer_f100 = 0x00000007, + regk_timer_f29_493 = 0x00000004, + regk_timer_f32 = 0x00000005, + regk_timer_f32_768 = 0x00000006, + regk_timer_f90 = 0x00000003, + regk_timer_hold = 0x00000001, + regk_timer_ld = 0x00000000, + regk_timer_no = 0x00000000, + regk_timer_off = 0x00000000, + regk_timer_run = 0x00000002, + regk_timer_rw_cnt_cfg_default = 0x00000000, + regk_timer_rw_intr_mask_default = 0x00000000, + regk_timer_rw_out_default = 0x00000000, + regk_timer_rw_test_default = 0x00000000, + regk_timer_rw_tmr0_ctrl_default = 0x00000000, + regk_timer_rw_tmr1_ctrl_default = 0x00000000, + regk_timer_rw_trig_cfg_default = 0x00000000, + regk_timer_start = 0x00000001, + regk_timer_stop = 0x00000000, + regk_timer_time = 0x00000001, + regk_timer_tmr0 = 0x00000002, + regk_timer_tmr1 = 0x00000003, + regk_timer_vclk = 0x00000002, + regk_timer_yes = 0x00000001 +}; +#endif /* __timer_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-a3/mach/memmap.h b/arch/cris/include/arch-v32/mach-a3/mach/memmap.h new file mode 100644 index 000000000000..7e15c9eb4e49 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/memmap.h @@ -0,0 +1,10 @@ +#ifndef _ASM_ARCH_MEMMAP_H +#define _ASM_ARCH_MEMMAP_H + +#define MEM_INTMEM_START (0x38000000) +#define MEM_INTMEM_SIZE (0x00018000) +#define MEM_DRAM_START (0x40000000) + +#define MEM_NON_CACHEABLE (0x80000000) + +#endif diff --git a/arch/cris/include/arch-v32/mach-a3/mach/pinmux.h b/arch/cris/include/arch-v32/mach-a3/mach/pinmux.h new file mode 100644 index 000000000000..db42a7254584 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/pinmux.h @@ -0,0 +1,45 @@ +#ifndef _ASM_CRIS_ARCH_PINMUX_H +#define _ASM_CRIS_ARCH_PINMUX_H + +#define PORT_A 0 +#define PORT_B 1 +#define PORT_C 2 + +enum pin_mode { + pinmux_none = 0, + pinmux_fixed, + pinmux_gpio, + pinmux_iop +}; + +enum fixed_function { + pinmux_eth, + pinmux_geth, + pinmux_tg_ccd, + pinmux_tg_cmos, + pinmux_vout, + pinmux_ser1, + pinmux_ser2, + pinmux_ser3, + pinmux_ser4, + pinmux_sser, + pinmux_pio, + pinmux_pwm0, + pinmux_pwm1, + pinmux_pwm2, + pinmux_i2c0, + pinmux_i2c1, + pinmux_i2c1_3wire, + pinmux_i2c1_sda1, + pinmux_i2c1_sda2, + pinmux_i2c1_sda3, +}; + +int crisv32_pinmux_init(void); +int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode); +int crisv32_pinmux_alloc_fixed(enum fixed_function function); +int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin); +int crisv32_pinmux_dealloc_fixed(enum fixed_function function); +void crisv32_pinmux_dump(void); + +#endif diff --git a/arch/cris/include/arch-v32/mach-a3/mach/startup.inc b/arch/cris/include/arch-v32/mach-a3/mach/startup.inc new file mode 100644 index 000000000000..2f23e5e16f4a --- /dev/null +++ b/arch/cris/include/arch-v32/mach-a3/mach/startup.inc @@ -0,0 +1,60 @@ +#include +#include +#include +#include +#include + + .macro GIO_INIT + move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PA_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PB_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pc_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PC_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pc_oe), $r1 + move.d $r0, [$r1] + + move.d 0xFFFFFFFF, $r0 + move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pa), $r1 + move.d $r0, [$r1] + move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1 + move.d $r0, [$r1] + move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pc), $r1 + move.d $r0, [$r1] + .endm + + .macro START_CLOCKS + move.d REG_ADDR(clkgen, regi_clkgen, rw_clk_ctrl), $r1 + move.d [$r1], $r0 + or.d REG_STATE(clkgen, rw_clk_ctrl, cpu, yes) | \ + REG_STATE(clkgen, rw_clk_ctrl, ddr2, yes) | \ + REG_STATE(clkgen, rw_clk_ctrl, memarb_bar_ddr, yes), $r0 + move.d $r0, [$r1] + .endm + + .macro SETUP_WAIT_STATES + move.d REG_ADDR(pio, regi_pio, rw_ce0_cfg), $r0 + move.d CONFIG_ETRAX_PIO_CE0_CFG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(pio, regi_pio, rw_ce1_cfg), $r0 + move.d CONFIG_ETRAX_PIO_CE1_CFG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(pio, regi_pio, rw_ce2_cfg), $r0 + move.d CONFIG_ETRAX_PIO_CE2_CFG, $r1 + move.d $r1, [$r0] + .endm diff --git a/arch/cris/include/arch-v32/mach-fs/mach/arbiter.h b/arch/cris/include/arch-v32/mach-fs/mach/arbiter.h new file mode 100644 index 000000000000..a2e0ec8faa7d --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/arbiter.h @@ -0,0 +1,28 @@ +#ifndef _ASM_CRIS_ARCH_ARBITER_H +#define _ASM_CRIS_ARCH_ARBITER_H + +#define EXT_REGION 0 +#define INT_REGION 1 + +typedef void (watch_callback)(void); + +enum { + arbiter_all_dmas = 0x3ff, + arbiter_cpu = 0xc00, + arbiter_all_clients = 0x3fff +}; + +enum { + arbiter_all_read = 0x55, + arbiter_all_write = 0xaa, + arbiter_all_accesses = 0xff +}; + +int crisv32_arbiter_allocate_bandwidth(int client, int region, + unsigned long bandwidth); +int crisv32_arbiter_watch(unsigned long start, unsigned long size, + unsigned long clients, unsigned long accesses, + watch_callback * cb); +int crisv32_arbiter_unwatch(int id); + +#endif diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/bif_core_defs_asm.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/bif_core_defs_asm.h new file mode 100644 index 000000000000..0a409c92837e --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/bif_core_defs_asm.h @@ -0,0 +1,319 @@ +#ifndef __bif_core_defs_asm_h +#define __bif_core_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_core_regs.r + * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp + * last modfied: Mon Apr 11 16:06:33 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_core_defs_asm.h ../../inst/bif/rtl/bif_core_regs.r + * id: $Id: bif_core_defs_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_grp1_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp1_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp1_cfg___lw___width 6 +#define reg_bif_core_rw_grp1_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp1_cfg___ew___width 3 +#define reg_bif_core_rw_grp1_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp1_cfg___zw___width 3 +#define reg_bif_core_rw_grp1_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp1_cfg___aw___width 2 +#define reg_bif_core_rw_grp1_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp1_cfg___dw___width 2 +#define reg_bif_core_rw_grp1_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp1_cfg___ewb___width 2 +#define reg_bif_core_rw_grp1_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp1_cfg___bw___width 1 +#define reg_bif_core_rw_grp1_cfg___bw___bit 18 +#define reg_bif_core_rw_grp1_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp1_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp1_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp1_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp1_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp1_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp1_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp1_cfg___mode___width 1 +#define reg_bif_core_rw_grp1_cfg___mode___bit 21 +#define reg_bif_core_rw_grp1_cfg_offset 0 + +/* Register rw_grp2_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp2_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp2_cfg___lw___width 6 +#define reg_bif_core_rw_grp2_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp2_cfg___ew___width 3 +#define reg_bif_core_rw_grp2_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp2_cfg___zw___width 3 +#define reg_bif_core_rw_grp2_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp2_cfg___aw___width 2 +#define reg_bif_core_rw_grp2_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp2_cfg___dw___width 2 +#define reg_bif_core_rw_grp2_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp2_cfg___ewb___width 2 +#define reg_bif_core_rw_grp2_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp2_cfg___bw___width 1 +#define reg_bif_core_rw_grp2_cfg___bw___bit 18 +#define reg_bif_core_rw_grp2_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp2_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp2_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp2_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp2_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp2_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp2_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp2_cfg___mode___width 1 +#define reg_bif_core_rw_grp2_cfg___mode___bit 21 +#define reg_bif_core_rw_grp2_cfg_offset 4 + +/* Register rw_grp3_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp3_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp3_cfg___lw___width 6 +#define reg_bif_core_rw_grp3_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp3_cfg___ew___width 3 +#define reg_bif_core_rw_grp3_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp3_cfg___zw___width 3 +#define reg_bif_core_rw_grp3_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp3_cfg___aw___width 2 +#define reg_bif_core_rw_grp3_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp3_cfg___dw___width 2 +#define reg_bif_core_rw_grp3_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp3_cfg___ewb___width 2 +#define reg_bif_core_rw_grp3_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp3_cfg___bw___width 1 +#define reg_bif_core_rw_grp3_cfg___bw___bit 18 +#define reg_bif_core_rw_grp3_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp3_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp3_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp3_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp3_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp3_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp3_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp3_cfg___mode___width 1 +#define reg_bif_core_rw_grp3_cfg___mode___bit 21 +#define reg_bif_core_rw_grp3_cfg___gated_csp0___lsb 24 +#define reg_bif_core_rw_grp3_cfg___gated_csp0___width 2 +#define reg_bif_core_rw_grp3_cfg___gated_csp1___lsb 26 +#define reg_bif_core_rw_grp3_cfg___gated_csp1___width 2 +#define reg_bif_core_rw_grp3_cfg___gated_csp2___lsb 28 +#define reg_bif_core_rw_grp3_cfg___gated_csp2___width 2 +#define reg_bif_core_rw_grp3_cfg___gated_csp3___lsb 30 +#define reg_bif_core_rw_grp3_cfg___gated_csp3___width 2 +#define reg_bif_core_rw_grp3_cfg_offset 8 + +/* Register rw_grp4_cfg, scope bif_core, type rw */ +#define reg_bif_core_rw_grp4_cfg___lw___lsb 0 +#define reg_bif_core_rw_grp4_cfg___lw___width 6 +#define reg_bif_core_rw_grp4_cfg___ew___lsb 6 +#define reg_bif_core_rw_grp4_cfg___ew___width 3 +#define reg_bif_core_rw_grp4_cfg___zw___lsb 9 +#define reg_bif_core_rw_grp4_cfg___zw___width 3 +#define reg_bif_core_rw_grp4_cfg___aw___lsb 12 +#define reg_bif_core_rw_grp4_cfg___aw___width 2 +#define reg_bif_core_rw_grp4_cfg___dw___lsb 14 +#define reg_bif_core_rw_grp4_cfg___dw___width 2 +#define reg_bif_core_rw_grp4_cfg___ewb___lsb 16 +#define reg_bif_core_rw_grp4_cfg___ewb___width 2 +#define reg_bif_core_rw_grp4_cfg___bw___lsb 18 +#define reg_bif_core_rw_grp4_cfg___bw___width 1 +#define reg_bif_core_rw_grp4_cfg___bw___bit 18 +#define reg_bif_core_rw_grp4_cfg___wr_extend___lsb 19 +#define reg_bif_core_rw_grp4_cfg___wr_extend___width 1 +#define reg_bif_core_rw_grp4_cfg___wr_extend___bit 19 +#define reg_bif_core_rw_grp4_cfg___erc_en___lsb 20 +#define reg_bif_core_rw_grp4_cfg___erc_en___width 1 +#define reg_bif_core_rw_grp4_cfg___erc_en___bit 20 +#define reg_bif_core_rw_grp4_cfg___mode___lsb 21 +#define reg_bif_core_rw_grp4_cfg___mode___width 1 +#define reg_bif_core_rw_grp4_cfg___mode___bit 21 +#define reg_bif_core_rw_grp4_cfg___gated_csp4___lsb 26 +#define reg_bif_core_rw_grp4_cfg___gated_csp4___width 2 +#define reg_bif_core_rw_grp4_cfg___gated_csp5___lsb 28 +#define reg_bif_core_rw_grp4_cfg___gated_csp5___width 2 +#define reg_bif_core_rw_grp4_cfg___gated_csp6___lsb 30 +#define reg_bif_core_rw_grp4_cfg___gated_csp6___width 2 +#define reg_bif_core_rw_grp4_cfg_offset 12 + +/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___lsb 0 +#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___width 5 +#define reg_bif_core_rw_sdram_cfg_grp0___ca___lsb 5 +#define reg_bif_core_rw_sdram_cfg_grp0___ca___width 3 +#define reg_bif_core_rw_sdram_cfg_grp0___type___lsb 8 +#define reg_bif_core_rw_sdram_cfg_grp0___type___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___type___bit 8 +#define reg_bif_core_rw_sdram_cfg_grp0___bw___lsb 9 +#define reg_bif_core_rw_sdram_cfg_grp0___bw___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___bw___bit 9 +#define reg_bif_core_rw_sdram_cfg_grp0___sh___lsb 10 +#define reg_bif_core_rw_sdram_cfg_grp0___sh___width 3 +#define reg_bif_core_rw_sdram_cfg_grp0___wmm___lsb 13 +#define reg_bif_core_rw_sdram_cfg_grp0___wmm___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___wmm___bit 13 +#define reg_bif_core_rw_sdram_cfg_grp0___sh16___lsb 14 +#define reg_bif_core_rw_sdram_cfg_grp0___sh16___width 1 +#define reg_bif_core_rw_sdram_cfg_grp0___sh16___bit 14 +#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___lsb 15 +#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___width 5 +#define reg_bif_core_rw_sdram_cfg_grp0_offset 16 + +/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___lsb 0 +#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___width 5 +#define reg_bif_core_rw_sdram_cfg_grp1___ca___lsb 5 +#define reg_bif_core_rw_sdram_cfg_grp1___ca___width 3 +#define reg_bif_core_rw_sdram_cfg_grp1___type___lsb 8 +#define reg_bif_core_rw_sdram_cfg_grp1___type___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___type___bit 8 +#define reg_bif_core_rw_sdram_cfg_grp1___bw___lsb 9 +#define reg_bif_core_rw_sdram_cfg_grp1___bw___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___bw___bit 9 +#define reg_bif_core_rw_sdram_cfg_grp1___sh___lsb 10 +#define reg_bif_core_rw_sdram_cfg_grp1___sh___width 3 +#define reg_bif_core_rw_sdram_cfg_grp1___wmm___lsb 13 +#define reg_bif_core_rw_sdram_cfg_grp1___wmm___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___wmm___bit 13 +#define reg_bif_core_rw_sdram_cfg_grp1___sh16___lsb 14 +#define reg_bif_core_rw_sdram_cfg_grp1___sh16___width 1 +#define reg_bif_core_rw_sdram_cfg_grp1___sh16___bit 14 +#define reg_bif_core_rw_sdram_cfg_grp1_offset 20 + +/* Register rw_sdram_timing, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_timing___cl___lsb 0 +#define reg_bif_core_rw_sdram_timing___cl___width 3 +#define reg_bif_core_rw_sdram_timing___rcd___lsb 3 +#define reg_bif_core_rw_sdram_timing___rcd___width 3 +#define reg_bif_core_rw_sdram_timing___rp___lsb 6 +#define reg_bif_core_rw_sdram_timing___rp___width 3 +#define reg_bif_core_rw_sdram_timing___rc___lsb 9 +#define reg_bif_core_rw_sdram_timing___rc___width 2 +#define reg_bif_core_rw_sdram_timing___dpl___lsb 11 +#define reg_bif_core_rw_sdram_timing___dpl___width 2 +#define reg_bif_core_rw_sdram_timing___pde___lsb 13 +#define reg_bif_core_rw_sdram_timing___pde___width 1 +#define reg_bif_core_rw_sdram_timing___pde___bit 13 +#define reg_bif_core_rw_sdram_timing___ref___lsb 14 +#define reg_bif_core_rw_sdram_timing___ref___width 2 +#define reg_bif_core_rw_sdram_timing___cpd___lsb 16 +#define reg_bif_core_rw_sdram_timing___cpd___width 1 +#define reg_bif_core_rw_sdram_timing___cpd___bit 16 +#define reg_bif_core_rw_sdram_timing___sdcke___lsb 17 +#define reg_bif_core_rw_sdram_timing___sdcke___width 1 +#define reg_bif_core_rw_sdram_timing___sdcke___bit 17 +#define reg_bif_core_rw_sdram_timing___sdclk___lsb 18 +#define reg_bif_core_rw_sdram_timing___sdclk___width 1 +#define reg_bif_core_rw_sdram_timing___sdclk___bit 18 +#define reg_bif_core_rw_sdram_timing_offset 24 + +/* Register rw_sdram_cmd, scope bif_core, type rw */ +#define reg_bif_core_rw_sdram_cmd___cmd___lsb 0 +#define reg_bif_core_rw_sdram_cmd___cmd___width 3 +#define reg_bif_core_rw_sdram_cmd___mrs_data___lsb 3 +#define reg_bif_core_rw_sdram_cmd___mrs_data___width 15 +#define reg_bif_core_rw_sdram_cmd_offset 28 + +/* Register rs_sdram_ref_stat, scope bif_core, type rs */ +#define reg_bif_core_rs_sdram_ref_stat___ok___lsb 0 +#define reg_bif_core_rs_sdram_ref_stat___ok___width 1 +#define reg_bif_core_rs_sdram_ref_stat___ok___bit 0 +#define reg_bif_core_rs_sdram_ref_stat_offset 32 + +/* Register r_sdram_ref_stat, scope bif_core, type r */ +#define reg_bif_core_r_sdram_ref_stat___ok___lsb 0 +#define reg_bif_core_r_sdram_ref_stat___ok___width 1 +#define reg_bif_core_r_sdram_ref_stat___ok___bit 0 +#define reg_bif_core_r_sdram_ref_stat_offset 36 + + +/* Constants */ +#define regk_bif_core_bank2 0x00000000 +#define regk_bif_core_bank4 0x00000001 +#define regk_bif_core_bit10 0x0000000a +#define regk_bif_core_bit11 0x0000000b +#define regk_bif_core_bit12 0x0000000c +#define regk_bif_core_bit13 0x0000000d +#define regk_bif_core_bit14 0x0000000e +#define regk_bif_core_bit15 0x0000000f +#define regk_bif_core_bit16 0x00000010 +#define regk_bif_core_bit17 0x00000011 +#define regk_bif_core_bit18 0x00000012 +#define regk_bif_core_bit19 0x00000013 +#define regk_bif_core_bit20 0x00000014 +#define regk_bif_core_bit21 0x00000015 +#define regk_bif_core_bit22 0x00000016 +#define regk_bif_core_bit23 0x00000017 +#define regk_bif_core_bit24 0x00000018 +#define regk_bif_core_bit25 0x00000019 +#define regk_bif_core_bit26 0x0000001a +#define regk_bif_core_bit27 0x0000001b +#define regk_bif_core_bit28 0x0000001c +#define regk_bif_core_bit29 0x0000001d +#define regk_bif_core_bit9 0x00000009 +#define regk_bif_core_bw16 0x00000001 +#define regk_bif_core_bw32 0x00000000 +#define regk_bif_core_bwe 0x00000000 +#define regk_bif_core_cwe 0x00000001 +#define regk_bif_core_e15us 0x00000001 +#define regk_bif_core_e7800ns 0x00000002 +#define regk_bif_core_grp0 0x00000000 +#define regk_bif_core_grp1 0x00000001 +#define regk_bif_core_mrs 0x00000003 +#define regk_bif_core_no 0x00000000 +#define regk_bif_core_none 0x00000000 +#define regk_bif_core_nop 0x00000000 +#define regk_bif_core_off 0x00000000 +#define regk_bif_core_pre 0x00000002 +#define regk_bif_core_r_sdram_ref_stat_default 0x00000001 +#define regk_bif_core_rd 0x00000002 +#define regk_bif_core_ref 0x00000001 +#define regk_bif_core_rs_sdram_ref_stat_default 0x00000001 +#define regk_bif_core_rw_grp1_cfg_default 0x000006cf +#define regk_bif_core_rw_grp2_cfg_default 0x000006cf +#define regk_bif_core_rw_grp3_cfg_default 0x000006cf +#define regk_bif_core_rw_grp4_cfg_default 0x000006cf +#define regk_bif_core_rw_sdram_cfg_grp1_default 0x00000000 +#define regk_bif_core_slf 0x00000004 +#define regk_bif_core_wr 0x00000001 +#define regk_bif_core_yes 0x00000001 +#endif /* __bif_core_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/config_defs_asm.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/config_defs_asm.h new file mode 100644 index 000000000000..a9908dfc2937 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/config_defs_asm.h @@ -0,0 +1,131 @@ +#ifndef __config_defs_asm_h +#define __config_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../rtl/config_regs.r + * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp + * last modfied: Thu Mar 4 12:34:39 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/config_defs_asm.h ../../rtl/config_regs.r + * id: $Id: config_defs_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register r_bootsel, scope config, type r */ +#define reg_config_r_bootsel___boot_mode___lsb 0 +#define reg_config_r_bootsel___boot_mode___width 3 +#define reg_config_r_bootsel___full_duplex___lsb 3 +#define reg_config_r_bootsel___full_duplex___width 1 +#define reg_config_r_bootsel___full_duplex___bit 3 +#define reg_config_r_bootsel___user___lsb 4 +#define reg_config_r_bootsel___user___width 1 +#define reg_config_r_bootsel___user___bit 4 +#define reg_config_r_bootsel___pll___lsb 5 +#define reg_config_r_bootsel___pll___width 1 +#define reg_config_r_bootsel___pll___bit 5 +#define reg_config_r_bootsel___flash_bw___lsb 6 +#define reg_config_r_bootsel___flash_bw___width 1 +#define reg_config_r_bootsel___flash_bw___bit 6 +#define reg_config_r_bootsel_offset 0 + +/* Register rw_clk_ctrl, scope config, type rw */ +#define reg_config_rw_clk_ctrl___pll___lsb 0 +#define reg_config_rw_clk_ctrl___pll___width 1 +#define reg_config_rw_clk_ctrl___pll___bit 0 +#define reg_config_rw_clk_ctrl___cpu___lsb 1 +#define reg_config_rw_clk_ctrl___cpu___width 1 +#define reg_config_rw_clk_ctrl___cpu___bit 1 +#define reg_config_rw_clk_ctrl___iop___lsb 2 +#define reg_config_rw_clk_ctrl___iop___width 1 +#define reg_config_rw_clk_ctrl___iop___bit 2 +#define reg_config_rw_clk_ctrl___dma01_eth0___lsb 3 +#define reg_config_rw_clk_ctrl___dma01_eth0___width 1 +#define reg_config_rw_clk_ctrl___dma01_eth0___bit 3 +#define reg_config_rw_clk_ctrl___dma23___lsb 4 +#define reg_config_rw_clk_ctrl___dma23___width 1 +#define reg_config_rw_clk_ctrl___dma23___bit 4 +#define reg_config_rw_clk_ctrl___dma45___lsb 5 +#define reg_config_rw_clk_ctrl___dma45___width 1 +#define reg_config_rw_clk_ctrl___dma45___bit 5 +#define reg_config_rw_clk_ctrl___dma67___lsb 6 +#define reg_config_rw_clk_ctrl___dma67___width 1 +#define reg_config_rw_clk_ctrl___dma67___bit 6 +#define reg_config_rw_clk_ctrl___dma89_strcop___lsb 7 +#define reg_config_rw_clk_ctrl___dma89_strcop___width 1 +#define reg_config_rw_clk_ctrl___dma89_strcop___bit 7 +#define reg_config_rw_clk_ctrl___bif___lsb 8 +#define reg_config_rw_clk_ctrl___bif___width 1 +#define reg_config_rw_clk_ctrl___bif___bit 8 +#define reg_config_rw_clk_ctrl___fix_io___lsb 9 +#define reg_config_rw_clk_ctrl___fix_io___width 1 +#define reg_config_rw_clk_ctrl___fix_io___bit 9 +#define reg_config_rw_clk_ctrl_offset 4 + +/* Register rw_pad_ctrl, scope config, type rw */ +#define reg_config_rw_pad_ctrl___usb_susp___lsb 0 +#define reg_config_rw_pad_ctrl___usb_susp___width 1 +#define reg_config_rw_pad_ctrl___usb_susp___bit 0 +#define reg_config_rw_pad_ctrl___phyrst_n___lsb 1 +#define reg_config_rw_pad_ctrl___phyrst_n___width 1 +#define reg_config_rw_pad_ctrl___phyrst_n___bit 1 +#define reg_config_rw_pad_ctrl_offset 8 + + +/* Constants */ +#define regk_config_bw16 0x00000000 +#define regk_config_bw32 0x00000001 +#define regk_config_master 0x00000005 +#define regk_config_nand 0x00000003 +#define regk_config_net_rx 0x00000001 +#define regk_config_net_tx_rx 0x00000002 +#define regk_config_no 0x00000000 +#define regk_config_none 0x00000007 +#define regk_config_nor 0x00000000 +#define regk_config_rw_clk_ctrl_default 0x00000002 +#define regk_config_rw_pad_ctrl_default 0x00000000 +#define regk_config_ser 0x00000004 +#define regk_config_slave 0x00000006 +#define regk_config_yes 0x00000001 +#endif /* __config_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/gio_defs_asm.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/gio_defs_asm.h new file mode 100644 index 000000000000..be4c63936d90 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/gio_defs_asm.h @@ -0,0 +1,276 @@ +#ifndef __gio_defs_asm_h +#define __gio_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/gio/rtl/gio_regs.r + * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp + * last modfied: Mon Apr 11 16:07:47 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/gio_defs_asm.h ../../inst/gio/rtl/gio_regs.r + * id: $Id: gio_defs_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_pa_dout, scope gio, type rw */ +#define reg_gio_rw_pa_dout___data___lsb 0 +#define reg_gio_rw_pa_dout___data___width 8 +#define reg_gio_rw_pa_dout_offset 0 + +/* Register r_pa_din, scope gio, type r */ +#define reg_gio_r_pa_din___data___lsb 0 +#define reg_gio_r_pa_din___data___width 8 +#define reg_gio_r_pa_din_offset 4 + +/* Register rw_pa_oe, scope gio, type rw */ +#define reg_gio_rw_pa_oe___oe___lsb 0 +#define reg_gio_rw_pa_oe___oe___width 8 +#define reg_gio_rw_pa_oe_offset 8 + +/* Register rw_intr_cfg, scope gio, type rw */ +#define reg_gio_rw_intr_cfg___pa0___lsb 0 +#define reg_gio_rw_intr_cfg___pa0___width 3 +#define reg_gio_rw_intr_cfg___pa1___lsb 3 +#define reg_gio_rw_intr_cfg___pa1___width 3 +#define reg_gio_rw_intr_cfg___pa2___lsb 6 +#define reg_gio_rw_intr_cfg___pa2___width 3 +#define reg_gio_rw_intr_cfg___pa3___lsb 9 +#define reg_gio_rw_intr_cfg___pa3___width 3 +#define reg_gio_rw_intr_cfg___pa4___lsb 12 +#define reg_gio_rw_intr_cfg___pa4___width 3 +#define reg_gio_rw_intr_cfg___pa5___lsb 15 +#define reg_gio_rw_intr_cfg___pa5___width 3 +#define reg_gio_rw_intr_cfg___pa6___lsb 18 +#define reg_gio_rw_intr_cfg___pa6___width 3 +#define reg_gio_rw_intr_cfg___pa7___lsb 21 +#define reg_gio_rw_intr_cfg___pa7___width 3 +#define reg_gio_rw_intr_cfg_offset 12 + +/* Register rw_intr_mask, scope gio, type rw */ +#define reg_gio_rw_intr_mask___pa0___lsb 0 +#define reg_gio_rw_intr_mask___pa0___width 1 +#define reg_gio_rw_intr_mask___pa0___bit 0 +#define reg_gio_rw_intr_mask___pa1___lsb 1 +#define reg_gio_rw_intr_mask___pa1___width 1 +#define reg_gio_rw_intr_mask___pa1___bit 1 +#define reg_gio_rw_intr_mask___pa2___lsb 2 +#define reg_gio_rw_intr_mask___pa2___width 1 +#define reg_gio_rw_intr_mask___pa2___bit 2 +#define reg_gio_rw_intr_mask___pa3___lsb 3 +#define reg_gio_rw_intr_mask___pa3___width 1 +#define reg_gio_rw_intr_mask___pa3___bit 3 +#define reg_gio_rw_intr_mask___pa4___lsb 4 +#define reg_gio_rw_intr_mask___pa4___width 1 +#define reg_gio_rw_intr_mask___pa4___bit 4 +#define reg_gio_rw_intr_mask___pa5___lsb 5 +#define reg_gio_rw_intr_mask___pa5___width 1 +#define reg_gio_rw_intr_mask___pa5___bit 5 +#define reg_gio_rw_intr_mask___pa6___lsb 6 +#define reg_gio_rw_intr_mask___pa6___width 1 +#define reg_gio_rw_intr_mask___pa6___bit 6 +#define reg_gio_rw_intr_mask___pa7___lsb 7 +#define reg_gio_rw_intr_mask___pa7___width 1 +#define reg_gio_rw_intr_mask___pa7___bit 7 +#define reg_gio_rw_intr_mask_offset 16 + +/* Register rw_ack_intr, scope gio, type rw */ +#define reg_gio_rw_ack_intr___pa0___lsb 0 +#define reg_gio_rw_ack_intr___pa0___width 1 +#define reg_gio_rw_ack_intr___pa0___bit 0 +#define reg_gio_rw_ack_intr___pa1___lsb 1 +#define reg_gio_rw_ack_intr___pa1___width 1 +#define reg_gio_rw_ack_intr___pa1___bit 1 +#define reg_gio_rw_ack_intr___pa2___lsb 2 +#define reg_gio_rw_ack_intr___pa2___width 1 +#define reg_gio_rw_ack_intr___pa2___bit 2 +#define reg_gio_rw_ack_intr___pa3___lsb 3 +#define reg_gio_rw_ack_intr___pa3___width 1 +#define reg_gio_rw_ack_intr___pa3___bit 3 +#define reg_gio_rw_ack_intr___pa4___lsb 4 +#define reg_gio_rw_ack_intr___pa4___width 1 +#define reg_gio_rw_ack_intr___pa4___bit 4 +#define reg_gio_rw_ack_intr___pa5___lsb 5 +#define reg_gio_rw_ack_intr___pa5___width 1 +#define reg_gio_rw_ack_intr___pa5___bit 5 +#define reg_gio_rw_ack_intr___pa6___lsb 6 +#define reg_gio_rw_ack_intr___pa6___width 1 +#define reg_gio_rw_ack_intr___pa6___bit 6 +#define reg_gio_rw_ack_intr___pa7___lsb 7 +#define reg_gio_rw_ack_intr___pa7___width 1 +#define reg_gio_rw_ack_intr___pa7___bit 7 +#define reg_gio_rw_ack_intr_offset 20 + +/* Register r_intr, scope gio, type r */ +#define reg_gio_r_intr___pa0___lsb 0 +#define reg_gio_r_intr___pa0___width 1 +#define reg_gio_r_intr___pa0___bit 0 +#define reg_gio_r_intr___pa1___lsb 1 +#define reg_gio_r_intr___pa1___width 1 +#define reg_gio_r_intr___pa1___bit 1 +#define reg_gio_r_intr___pa2___lsb 2 +#define reg_gio_r_intr___pa2___width 1 +#define reg_gio_r_intr___pa2___bit 2 +#define reg_gio_r_intr___pa3___lsb 3 +#define reg_gio_r_intr___pa3___width 1 +#define reg_gio_r_intr___pa3___bit 3 +#define reg_gio_r_intr___pa4___lsb 4 +#define reg_gio_r_intr___pa4___width 1 +#define reg_gio_r_intr___pa4___bit 4 +#define reg_gio_r_intr___pa5___lsb 5 +#define reg_gio_r_intr___pa5___width 1 +#define reg_gio_r_intr___pa5___bit 5 +#define reg_gio_r_intr___pa6___lsb 6 +#define reg_gio_r_intr___pa6___width 1 +#define reg_gio_r_intr___pa6___bit 6 +#define reg_gio_r_intr___pa7___lsb 7 +#define reg_gio_r_intr___pa7___width 1 +#define reg_gio_r_intr___pa7___bit 7 +#define reg_gio_r_intr_offset 24 + +/* Register r_masked_intr, scope gio, type r */ +#define reg_gio_r_masked_intr___pa0___lsb 0 +#define reg_gio_r_masked_intr___pa0___width 1 +#define reg_gio_r_masked_intr___pa0___bit 0 +#define reg_gio_r_masked_intr___pa1___lsb 1 +#define reg_gio_r_masked_intr___pa1___width 1 +#define reg_gio_r_masked_intr___pa1___bit 1 +#define reg_gio_r_masked_intr___pa2___lsb 2 +#define reg_gio_r_masked_intr___pa2___width 1 +#define reg_gio_r_masked_intr___pa2___bit 2 +#define reg_gio_r_masked_intr___pa3___lsb 3 +#define reg_gio_r_masked_intr___pa3___width 1 +#define reg_gio_r_masked_intr___pa3___bit 3 +#define reg_gio_r_masked_intr___pa4___lsb 4 +#define reg_gio_r_masked_intr___pa4___width 1 +#define reg_gio_r_masked_intr___pa4___bit 4 +#define reg_gio_r_masked_intr___pa5___lsb 5 +#define reg_gio_r_masked_intr___pa5___width 1 +#define reg_gio_r_masked_intr___pa5___bit 5 +#define reg_gio_r_masked_intr___pa6___lsb 6 +#define reg_gio_r_masked_intr___pa6___width 1 +#define reg_gio_r_masked_intr___pa6___bit 6 +#define reg_gio_r_masked_intr___pa7___lsb 7 +#define reg_gio_r_masked_intr___pa7___width 1 +#define reg_gio_r_masked_intr___pa7___bit 7 +#define reg_gio_r_masked_intr_offset 28 + +/* Register rw_pb_dout, scope gio, type rw */ +#define reg_gio_rw_pb_dout___data___lsb 0 +#define reg_gio_rw_pb_dout___data___width 18 +#define reg_gio_rw_pb_dout_offset 32 + +/* Register r_pb_din, scope gio, type r */ +#define reg_gio_r_pb_din___data___lsb 0 +#define reg_gio_r_pb_din___data___width 18 +#define reg_gio_r_pb_din_offset 36 + +/* Register rw_pb_oe, scope gio, type rw */ +#define reg_gio_rw_pb_oe___oe___lsb 0 +#define reg_gio_rw_pb_oe___oe___width 18 +#define reg_gio_rw_pb_oe_offset 40 + +/* Register rw_pc_dout, scope gio, type rw */ +#define reg_gio_rw_pc_dout___data___lsb 0 +#define reg_gio_rw_pc_dout___data___width 18 +#define reg_gio_rw_pc_dout_offset 48 + +/* Register r_pc_din, scope gio, type r */ +#define reg_gio_r_pc_din___data___lsb 0 +#define reg_gio_r_pc_din___data___width 18 +#define reg_gio_r_pc_din_offset 52 + +/* Register rw_pc_oe, scope gio, type rw */ +#define reg_gio_rw_pc_oe___oe___lsb 0 +#define reg_gio_rw_pc_oe___oe___width 18 +#define reg_gio_rw_pc_oe_offset 56 + +/* Register rw_pd_dout, scope gio, type rw */ +#define reg_gio_rw_pd_dout___data___lsb 0 +#define reg_gio_rw_pd_dout___data___width 18 +#define reg_gio_rw_pd_dout_offset 64 + +/* Register r_pd_din, scope gio, type r */ +#define reg_gio_r_pd_din___data___lsb 0 +#define reg_gio_r_pd_din___data___width 18 +#define reg_gio_r_pd_din_offset 68 + +/* Register rw_pd_oe, scope gio, type rw */ +#define reg_gio_rw_pd_oe___oe___lsb 0 +#define reg_gio_rw_pd_oe___oe___width 18 +#define reg_gio_rw_pd_oe_offset 72 + +/* Register rw_pe_dout, scope gio, type rw */ +#define reg_gio_rw_pe_dout___data___lsb 0 +#define reg_gio_rw_pe_dout___data___width 18 +#define reg_gio_rw_pe_dout_offset 80 + +/* Register r_pe_din, scope gio, type r */ +#define reg_gio_r_pe_din___data___lsb 0 +#define reg_gio_r_pe_din___data___width 18 +#define reg_gio_r_pe_din_offset 84 + +/* Register rw_pe_oe, scope gio, type rw */ +#define reg_gio_rw_pe_oe___oe___lsb 0 +#define reg_gio_rw_pe_oe___oe___width 18 +#define reg_gio_rw_pe_oe_offset 88 + + +/* Constants */ +#define regk_gio_anyedge 0x00000007 +#define regk_gio_hi 0x00000001 +#define regk_gio_lo 0x00000002 +#define regk_gio_negedge 0x00000006 +#define regk_gio_no 0x00000000 +#define regk_gio_off 0x00000000 +#define regk_gio_posedge 0x00000005 +#define regk_gio_rw_intr_cfg_default 0x00000000 +#define regk_gio_rw_intr_mask_default 0x00000000 +#define regk_gio_rw_pa_oe_default 0x00000000 +#define regk_gio_rw_pb_oe_default 0x00000000 +#define regk_gio_rw_pc_oe_default 0x00000000 +#define regk_gio_rw_pd_oe_default 0x00000000 +#define regk_gio_rw_pe_oe_default 0x00000000 +#define regk_gio_set 0x00000003 +#define regk_gio_yes 0x00000001 +#endif /* __gio_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/pinmux_defs_asm.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/pinmux_defs_asm.h new file mode 100644 index 000000000000..30cf5a936b64 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/pinmux_defs_asm.h @@ -0,0 +1,632 @@ +#ifndef __pinmux_defs_asm_h +#define __pinmux_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r + * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp + * last modfied: Mon Apr 11 16:09:11 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/pinmux_defs_asm.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r + * id: $Id: pinmux_defs_asm.h,v 1.1 2007/04/11 11:00:39 ricardw Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_pa, scope pinmux, type rw */ +#define reg_pinmux_rw_pa___pa0___lsb 0 +#define reg_pinmux_rw_pa___pa0___width 1 +#define reg_pinmux_rw_pa___pa0___bit 0 +#define reg_pinmux_rw_pa___pa1___lsb 1 +#define reg_pinmux_rw_pa___pa1___width 1 +#define reg_pinmux_rw_pa___pa1___bit 1 +#define reg_pinmux_rw_pa___pa2___lsb 2 +#define reg_pinmux_rw_pa___pa2___width 1 +#define reg_pinmux_rw_pa___pa2___bit 2 +#define reg_pinmux_rw_pa___pa3___lsb 3 +#define reg_pinmux_rw_pa___pa3___width 1 +#define reg_pinmux_rw_pa___pa3___bit 3 +#define reg_pinmux_rw_pa___pa4___lsb 4 +#define reg_pinmux_rw_pa___pa4___width 1 +#define reg_pinmux_rw_pa___pa4___bit 4 +#define reg_pinmux_rw_pa___pa5___lsb 5 +#define reg_pinmux_rw_pa___pa5___width 1 +#define reg_pinmux_rw_pa___pa5___bit 5 +#define reg_pinmux_rw_pa___pa6___lsb 6 +#define reg_pinmux_rw_pa___pa6___width 1 +#define reg_pinmux_rw_pa___pa6___bit 6 +#define reg_pinmux_rw_pa___pa7___lsb 7 +#define reg_pinmux_rw_pa___pa7___width 1 +#define reg_pinmux_rw_pa___pa7___bit 7 +#define reg_pinmux_rw_pa___csp2_n___lsb 8 +#define reg_pinmux_rw_pa___csp2_n___width 1 +#define reg_pinmux_rw_pa___csp2_n___bit 8 +#define reg_pinmux_rw_pa___csp3_n___lsb 9 +#define reg_pinmux_rw_pa___csp3_n___width 1 +#define reg_pinmux_rw_pa___csp3_n___bit 9 +#define reg_pinmux_rw_pa___csp5_n___lsb 10 +#define reg_pinmux_rw_pa___csp5_n___width 1 +#define reg_pinmux_rw_pa___csp5_n___bit 10 +#define reg_pinmux_rw_pa___csp6_n___lsb 11 +#define reg_pinmux_rw_pa___csp6_n___width 1 +#define reg_pinmux_rw_pa___csp6_n___bit 11 +#define reg_pinmux_rw_pa___hsh4___lsb 12 +#define reg_pinmux_rw_pa___hsh4___width 1 +#define reg_pinmux_rw_pa___hsh4___bit 12 +#define reg_pinmux_rw_pa___hsh5___lsb 13 +#define reg_pinmux_rw_pa___hsh5___width 1 +#define reg_pinmux_rw_pa___hsh5___bit 13 +#define reg_pinmux_rw_pa___hsh6___lsb 14 +#define reg_pinmux_rw_pa___hsh6___width 1 +#define reg_pinmux_rw_pa___hsh6___bit 14 +#define reg_pinmux_rw_pa___hsh7___lsb 15 +#define reg_pinmux_rw_pa___hsh7___width 1 +#define reg_pinmux_rw_pa___hsh7___bit 15 +#define reg_pinmux_rw_pa_offset 0 + +/* Register rw_hwprot, scope pinmux, type rw */ +#define reg_pinmux_rw_hwprot___ser1___lsb 0 +#define reg_pinmux_rw_hwprot___ser1___width 1 +#define reg_pinmux_rw_hwprot___ser1___bit 0 +#define reg_pinmux_rw_hwprot___ser2___lsb 1 +#define reg_pinmux_rw_hwprot___ser2___width 1 +#define reg_pinmux_rw_hwprot___ser2___bit 1 +#define reg_pinmux_rw_hwprot___ser3___lsb 2 +#define reg_pinmux_rw_hwprot___ser3___width 1 +#define reg_pinmux_rw_hwprot___ser3___bit 2 +#define reg_pinmux_rw_hwprot___sser0___lsb 3 +#define reg_pinmux_rw_hwprot___sser0___width 1 +#define reg_pinmux_rw_hwprot___sser0___bit 3 +#define reg_pinmux_rw_hwprot___sser1___lsb 4 +#define reg_pinmux_rw_hwprot___sser1___width 1 +#define reg_pinmux_rw_hwprot___sser1___bit 4 +#define reg_pinmux_rw_hwprot___ata0___lsb 5 +#define reg_pinmux_rw_hwprot___ata0___width 1 +#define reg_pinmux_rw_hwprot___ata0___bit 5 +#define reg_pinmux_rw_hwprot___ata1___lsb 6 +#define reg_pinmux_rw_hwprot___ata1___width 1 +#define reg_pinmux_rw_hwprot___ata1___bit 6 +#define reg_pinmux_rw_hwprot___ata2___lsb 7 +#define reg_pinmux_rw_hwprot___ata2___width 1 +#define reg_pinmux_rw_hwprot___ata2___bit 7 +#define reg_pinmux_rw_hwprot___ata3___lsb 8 +#define reg_pinmux_rw_hwprot___ata3___width 1 +#define reg_pinmux_rw_hwprot___ata3___bit 8 +#define reg_pinmux_rw_hwprot___ata___lsb 9 +#define reg_pinmux_rw_hwprot___ata___width 1 +#define reg_pinmux_rw_hwprot___ata___bit 9 +#define reg_pinmux_rw_hwprot___eth1___lsb 10 +#define reg_pinmux_rw_hwprot___eth1___width 1 +#define reg_pinmux_rw_hwprot___eth1___bit 10 +#define reg_pinmux_rw_hwprot___eth1_mgm___lsb 11 +#define reg_pinmux_rw_hwprot___eth1_mgm___width 1 +#define reg_pinmux_rw_hwprot___eth1_mgm___bit 11 +#define reg_pinmux_rw_hwprot___timer___lsb 12 +#define reg_pinmux_rw_hwprot___timer___width 1 +#define reg_pinmux_rw_hwprot___timer___bit 12 +#define reg_pinmux_rw_hwprot___p21___lsb 13 +#define reg_pinmux_rw_hwprot___p21___width 1 +#define reg_pinmux_rw_hwprot___p21___bit 13 +#define reg_pinmux_rw_hwprot_offset 4 + +/* Register rw_pb_gio, scope pinmux, type rw */ +#define reg_pinmux_rw_pb_gio___pb0___lsb 0 +#define reg_pinmux_rw_pb_gio___pb0___width 1 +#define reg_pinmux_rw_pb_gio___pb0___bit 0 +#define reg_pinmux_rw_pb_gio___pb1___lsb 1 +#define reg_pinmux_rw_pb_gio___pb1___width 1 +#define reg_pinmux_rw_pb_gio___pb1___bit 1 +#define reg_pinmux_rw_pb_gio___pb2___lsb 2 +#define reg_pinmux_rw_pb_gio___pb2___width 1 +#define reg_pinmux_rw_pb_gio___pb2___bit 2 +#define reg_pinmux_rw_pb_gio___pb3___lsb 3 +#define reg_pinmux_rw_pb_gio___pb3___width 1 +#define reg_pinmux_rw_pb_gio___pb3___bit 3 +#define reg_pinmux_rw_pb_gio___pb4___lsb 4 +#define reg_pinmux_rw_pb_gio___pb4___width 1 +#define reg_pinmux_rw_pb_gio___pb4___bit 4 +#define reg_pinmux_rw_pb_gio___pb5___lsb 5 +#define reg_pinmux_rw_pb_gio___pb5___width 1 +#define reg_pinmux_rw_pb_gio___pb5___bit 5 +#define reg_pinmux_rw_pb_gio___pb6___lsb 6 +#define reg_pinmux_rw_pb_gio___pb6___width 1 +#define reg_pinmux_rw_pb_gio___pb6___bit 6 +#define reg_pinmux_rw_pb_gio___pb7___lsb 7 +#define reg_pinmux_rw_pb_gio___pb7___width 1 +#define reg_pinmux_rw_pb_gio___pb7___bit 7 +#define reg_pinmux_rw_pb_gio___pb8___lsb 8 +#define reg_pinmux_rw_pb_gio___pb8___width 1 +#define reg_pinmux_rw_pb_gio___pb8___bit 8 +#define reg_pinmux_rw_pb_gio___pb9___lsb 9 +#define reg_pinmux_rw_pb_gio___pb9___width 1 +#define reg_pinmux_rw_pb_gio___pb9___bit 9 +#define reg_pinmux_rw_pb_gio___pb10___lsb 10 +#define reg_pinmux_rw_pb_gio___pb10___width 1 +#define reg_pinmux_rw_pb_gio___pb10___bit 10 +#define reg_pinmux_rw_pb_gio___pb11___lsb 11 +#define reg_pinmux_rw_pb_gio___pb11___width 1 +#define reg_pinmux_rw_pb_gio___pb11___bit 11 +#define reg_pinmux_rw_pb_gio___pb12___lsb 12 +#define reg_pinmux_rw_pb_gio___pb12___width 1 +#define reg_pinmux_rw_pb_gio___pb12___bit 12 +#define reg_pinmux_rw_pb_gio___pb13___lsb 13 +#define reg_pinmux_rw_pb_gio___pb13___width 1 +#define reg_pinmux_rw_pb_gio___pb13___bit 13 +#define reg_pinmux_rw_pb_gio___pb14___lsb 14 +#define reg_pinmux_rw_pb_gio___pb14___width 1 +#define reg_pinmux_rw_pb_gio___pb14___bit 14 +#define reg_pinmux_rw_pb_gio___pb15___lsb 15 +#define reg_pinmux_rw_pb_gio___pb15___width 1 +#define reg_pinmux_rw_pb_gio___pb15___bit 15 +#define reg_pinmux_rw_pb_gio___pb16___lsb 16 +#define reg_pinmux_rw_pb_gio___pb16___width 1 +#define reg_pinmux_rw_pb_gio___pb16___bit 16 +#define reg_pinmux_rw_pb_gio___pb17___lsb 17 +#define reg_pinmux_rw_pb_gio___pb17___width 1 +#define reg_pinmux_rw_pb_gio___pb17___bit 17 +#define reg_pinmux_rw_pb_gio_offset 8 + +/* Register rw_pb_iop, scope pinmux, type rw */ +#define reg_pinmux_rw_pb_iop___pb0___lsb 0 +#define reg_pinmux_rw_pb_iop___pb0___width 1 +#define reg_pinmux_rw_pb_iop___pb0___bit 0 +#define reg_pinmux_rw_pb_iop___pb1___lsb 1 +#define reg_pinmux_rw_pb_iop___pb1___width 1 +#define reg_pinmux_rw_pb_iop___pb1___bit 1 +#define reg_pinmux_rw_pb_iop___pb2___lsb 2 +#define reg_pinmux_rw_pb_iop___pb2___width 1 +#define reg_pinmux_rw_pb_iop___pb2___bit 2 +#define reg_pinmux_rw_pb_iop___pb3___lsb 3 +#define reg_pinmux_rw_pb_iop___pb3___width 1 +#define reg_pinmux_rw_pb_iop___pb3___bit 3 +#define reg_pinmux_rw_pb_iop___pb4___lsb 4 +#define reg_pinmux_rw_pb_iop___pb4___width 1 +#define reg_pinmux_rw_pb_iop___pb4___bit 4 +#define reg_pinmux_rw_pb_iop___pb5___lsb 5 +#define reg_pinmux_rw_pb_iop___pb5___width 1 +#define reg_pinmux_rw_pb_iop___pb5___bit 5 +#define reg_pinmux_rw_pb_iop___pb6___lsb 6 +#define reg_pinmux_rw_pb_iop___pb6___width 1 +#define reg_pinmux_rw_pb_iop___pb6___bit 6 +#define reg_pinmux_rw_pb_iop___pb7___lsb 7 +#define reg_pinmux_rw_pb_iop___pb7___width 1 +#define reg_pinmux_rw_pb_iop___pb7___bit 7 +#define reg_pinmux_rw_pb_iop___pb8___lsb 8 +#define reg_pinmux_rw_pb_iop___pb8___width 1 +#define reg_pinmux_rw_pb_iop___pb8___bit 8 +#define reg_pinmux_rw_pb_iop___pb9___lsb 9 +#define reg_pinmux_rw_pb_iop___pb9___width 1 +#define reg_pinmux_rw_pb_iop___pb9___bit 9 +#define reg_pinmux_rw_pb_iop___pb10___lsb 10 +#define reg_pinmux_rw_pb_iop___pb10___width 1 +#define reg_pinmux_rw_pb_iop___pb10___bit 10 +#define reg_pinmux_rw_pb_iop___pb11___lsb 11 +#define reg_pinmux_rw_pb_iop___pb11___width 1 +#define reg_pinmux_rw_pb_iop___pb11___bit 11 +#define reg_pinmux_rw_pb_iop___pb12___lsb 12 +#define reg_pinmux_rw_pb_iop___pb12___width 1 +#define reg_pinmux_rw_pb_iop___pb12___bit 12 +#define reg_pinmux_rw_pb_iop___pb13___lsb 13 +#define reg_pinmux_rw_pb_iop___pb13___width 1 +#define reg_pinmux_rw_pb_iop___pb13___bit 13 +#define reg_pinmux_rw_pb_iop___pb14___lsb 14 +#define reg_pinmux_rw_pb_iop___pb14___width 1 +#define reg_pinmux_rw_pb_iop___pb14___bit 14 +#define reg_pinmux_rw_pb_iop___pb15___lsb 15 +#define reg_pinmux_rw_pb_iop___pb15___width 1 +#define reg_pinmux_rw_pb_iop___pb15___bit 15 +#define reg_pinmux_rw_pb_iop___pb16___lsb 16 +#define reg_pinmux_rw_pb_iop___pb16___width 1 +#define reg_pinmux_rw_pb_iop___pb16___bit 16 +#define reg_pinmux_rw_pb_iop___pb17___lsb 17 +#define reg_pinmux_rw_pb_iop___pb17___width 1 +#define reg_pinmux_rw_pb_iop___pb17___bit 17 +#define reg_pinmux_rw_pb_iop_offset 12 + +/* Register rw_pc_gio, scope pinmux, type rw */ +#define reg_pinmux_rw_pc_gio___pc0___lsb 0 +#define reg_pinmux_rw_pc_gio___pc0___width 1 +#define reg_pinmux_rw_pc_gio___pc0___bit 0 +#define reg_pinmux_rw_pc_gio___pc1___lsb 1 +#define reg_pinmux_rw_pc_gio___pc1___width 1 +#define reg_pinmux_rw_pc_gio___pc1___bit 1 +#define reg_pinmux_rw_pc_gio___pc2___lsb 2 +#define reg_pinmux_rw_pc_gio___pc2___width 1 +#define reg_pinmux_rw_pc_gio___pc2___bit 2 +#define reg_pinmux_rw_pc_gio___pc3___lsb 3 +#define reg_pinmux_rw_pc_gio___pc3___width 1 +#define reg_pinmux_rw_pc_gio___pc3___bit 3 +#define reg_pinmux_rw_pc_gio___pc4___lsb 4 +#define reg_pinmux_rw_pc_gio___pc4___width 1 +#define reg_pinmux_rw_pc_gio___pc4___bit 4 +#define reg_pinmux_rw_pc_gio___pc5___lsb 5 +#define reg_pinmux_rw_pc_gio___pc5___width 1 +#define reg_pinmux_rw_pc_gio___pc5___bit 5 +#define reg_pinmux_rw_pc_gio___pc6___lsb 6 +#define reg_pinmux_rw_pc_gio___pc6___width 1 +#define reg_pinmux_rw_pc_gio___pc6___bit 6 +#define reg_pinmux_rw_pc_gio___pc7___lsb 7 +#define reg_pinmux_rw_pc_gio___pc7___width 1 +#define reg_pinmux_rw_pc_gio___pc7___bit 7 +#define reg_pinmux_rw_pc_gio___pc8___lsb 8 +#define reg_pinmux_rw_pc_gio___pc8___width 1 +#define reg_pinmux_rw_pc_gio___pc8___bit 8 +#define reg_pinmux_rw_pc_gio___pc9___lsb 9 +#define reg_pinmux_rw_pc_gio___pc9___width 1 +#define reg_pinmux_rw_pc_gio___pc9___bit 9 +#define reg_pinmux_rw_pc_gio___pc10___lsb 10 +#define reg_pinmux_rw_pc_gio___pc10___width 1 +#define reg_pinmux_rw_pc_gio___pc10___bit 10 +#define reg_pinmux_rw_pc_gio___pc11___lsb 11 +#define reg_pinmux_rw_pc_gio___pc11___width 1 +#define reg_pinmux_rw_pc_gio___pc11___bit 11 +#define reg_pinmux_rw_pc_gio___pc12___lsb 12 +#define reg_pinmux_rw_pc_gio___pc12___width 1 +#define reg_pinmux_rw_pc_gio___pc12___bit 12 +#define reg_pinmux_rw_pc_gio___pc13___lsb 13 +#define reg_pinmux_rw_pc_gio___pc13___width 1 +#define reg_pinmux_rw_pc_gio___pc13___bit 13 +#define reg_pinmux_rw_pc_gio___pc14___lsb 14 +#define reg_pinmux_rw_pc_gio___pc14___width 1 +#define reg_pinmux_rw_pc_gio___pc14___bit 14 +#define reg_pinmux_rw_pc_gio___pc15___lsb 15 +#define reg_pinmux_rw_pc_gio___pc15___width 1 +#define reg_pinmux_rw_pc_gio___pc15___bit 15 +#define reg_pinmux_rw_pc_gio___pc16___lsb 16 +#define reg_pinmux_rw_pc_gio___pc16___width 1 +#define reg_pinmux_rw_pc_gio___pc16___bit 16 +#define reg_pinmux_rw_pc_gio___pc17___lsb 17 +#define reg_pinmux_rw_pc_gio___pc17___width 1 +#define reg_pinmux_rw_pc_gio___pc17___bit 17 +#define reg_pinmux_rw_pc_gio_offset 16 + +/* Register rw_pc_iop, scope pinmux, type rw */ +#define reg_pinmux_rw_pc_iop___pc0___lsb 0 +#define reg_pinmux_rw_pc_iop___pc0___width 1 +#define reg_pinmux_rw_pc_iop___pc0___bit 0 +#define reg_pinmux_rw_pc_iop___pc1___lsb 1 +#define reg_pinmux_rw_pc_iop___pc1___width 1 +#define reg_pinmux_rw_pc_iop___pc1___bit 1 +#define reg_pinmux_rw_pc_iop___pc2___lsb 2 +#define reg_pinmux_rw_pc_iop___pc2___width 1 +#define reg_pinmux_rw_pc_iop___pc2___bit 2 +#define reg_pinmux_rw_pc_iop___pc3___lsb 3 +#define reg_pinmux_rw_pc_iop___pc3___width 1 +#define reg_pinmux_rw_pc_iop___pc3___bit 3 +#define reg_pinmux_rw_pc_iop___pc4___lsb 4 +#define reg_pinmux_rw_pc_iop___pc4___width 1 +#define reg_pinmux_rw_pc_iop___pc4___bit 4 +#define reg_pinmux_rw_pc_iop___pc5___lsb 5 +#define reg_pinmux_rw_pc_iop___pc5___width 1 +#define reg_pinmux_rw_pc_iop___pc5___bit 5 +#define reg_pinmux_rw_pc_iop___pc6___lsb 6 +#define reg_pinmux_rw_pc_iop___pc6___width 1 +#define reg_pinmux_rw_pc_iop___pc6___bit 6 +#define reg_pinmux_rw_pc_iop___pc7___lsb 7 +#define reg_pinmux_rw_pc_iop___pc7___width 1 +#define reg_pinmux_rw_pc_iop___pc7___bit 7 +#define reg_pinmux_rw_pc_iop___pc8___lsb 8 +#define reg_pinmux_rw_pc_iop___pc8___width 1 +#define reg_pinmux_rw_pc_iop___pc8___bit 8 +#define reg_pinmux_rw_pc_iop___pc9___lsb 9 +#define reg_pinmux_rw_pc_iop___pc9___width 1 +#define reg_pinmux_rw_pc_iop___pc9___bit 9 +#define reg_pinmux_rw_pc_iop___pc10___lsb 10 +#define reg_pinmux_rw_pc_iop___pc10___width 1 +#define reg_pinmux_rw_pc_iop___pc10___bit 10 +#define reg_pinmux_rw_pc_iop___pc11___lsb 11 +#define reg_pinmux_rw_pc_iop___pc11___width 1 +#define reg_pinmux_rw_pc_iop___pc11___bit 11 +#define reg_pinmux_rw_pc_iop___pc12___lsb 12 +#define reg_pinmux_rw_pc_iop___pc12___width 1 +#define reg_pinmux_rw_pc_iop___pc12___bit 12 +#define reg_pinmux_rw_pc_iop___pc13___lsb 13 +#define reg_pinmux_rw_pc_iop___pc13___width 1 +#define reg_pinmux_rw_pc_iop___pc13___bit 13 +#define reg_pinmux_rw_pc_iop___pc14___lsb 14 +#define reg_pinmux_rw_pc_iop___pc14___width 1 +#define reg_pinmux_rw_pc_iop___pc14___bit 14 +#define reg_pinmux_rw_pc_iop___pc15___lsb 15 +#define reg_pinmux_rw_pc_iop___pc15___width 1 +#define reg_pinmux_rw_pc_iop___pc15___bit 15 +#define reg_pinmux_rw_pc_iop___pc16___lsb 16 +#define reg_pinmux_rw_pc_iop___pc16___width 1 +#define reg_pinmux_rw_pc_iop___pc16___bit 16 +#define reg_pinmux_rw_pc_iop___pc17___lsb 17 +#define reg_pinmux_rw_pc_iop___pc17___width 1 +#define reg_pinmux_rw_pc_iop___pc17___bit 17 +#define reg_pinmux_rw_pc_iop_offset 20 + +/* Register rw_pd_gio, scope pinmux, type rw */ +#define reg_pinmux_rw_pd_gio___pd0___lsb 0 +#define reg_pinmux_rw_pd_gio___pd0___width 1 +#define reg_pinmux_rw_pd_gio___pd0___bit 0 +#define reg_pinmux_rw_pd_gio___pd1___lsb 1 +#define reg_pinmux_rw_pd_gio___pd1___width 1 +#define reg_pinmux_rw_pd_gio___pd1___bit 1 +#define reg_pinmux_rw_pd_gio___pd2___lsb 2 +#define reg_pinmux_rw_pd_gio___pd2___width 1 +#define reg_pinmux_rw_pd_gio___pd2___bit 2 +#define reg_pinmux_rw_pd_gio___pd3___lsb 3 +#define reg_pinmux_rw_pd_gio___pd3___width 1 +#define reg_pinmux_rw_pd_gio___pd3___bit 3 +#define reg_pinmux_rw_pd_gio___pd4___lsb 4 +#define reg_pinmux_rw_pd_gio___pd4___width 1 +#define reg_pinmux_rw_pd_gio___pd4___bit 4 +#define reg_pinmux_rw_pd_gio___pd5___lsb 5 +#define reg_pinmux_rw_pd_gio___pd5___width 1 +#define reg_pinmux_rw_pd_gio___pd5___bit 5 +#define reg_pinmux_rw_pd_gio___pd6___lsb 6 +#define reg_pinmux_rw_pd_gio___pd6___width 1 +#define reg_pinmux_rw_pd_gio___pd6___bit 6 +#define reg_pinmux_rw_pd_gio___pd7___lsb 7 +#define reg_pinmux_rw_pd_gio___pd7___width 1 +#define reg_pinmux_rw_pd_gio___pd7___bit 7 +#define reg_pinmux_rw_pd_gio___pd8___lsb 8 +#define reg_pinmux_rw_pd_gio___pd8___width 1 +#define reg_pinmux_rw_pd_gio___pd8___bit 8 +#define reg_pinmux_rw_pd_gio___pd9___lsb 9 +#define reg_pinmux_rw_pd_gio___pd9___width 1 +#define reg_pinmux_rw_pd_gio___pd9___bit 9 +#define reg_pinmux_rw_pd_gio___pd10___lsb 10 +#define reg_pinmux_rw_pd_gio___pd10___width 1 +#define reg_pinmux_rw_pd_gio___pd10___bit 10 +#define reg_pinmux_rw_pd_gio___pd11___lsb 11 +#define reg_pinmux_rw_pd_gio___pd11___width 1 +#define reg_pinmux_rw_pd_gio___pd11___bit 11 +#define reg_pinmux_rw_pd_gio___pd12___lsb 12 +#define reg_pinmux_rw_pd_gio___pd12___width 1 +#define reg_pinmux_rw_pd_gio___pd12___bit 12 +#define reg_pinmux_rw_pd_gio___pd13___lsb 13 +#define reg_pinmux_rw_pd_gio___pd13___width 1 +#define reg_pinmux_rw_pd_gio___pd13___bit 13 +#define reg_pinmux_rw_pd_gio___pd14___lsb 14 +#define reg_pinmux_rw_pd_gio___pd14___width 1 +#define reg_pinmux_rw_pd_gio___pd14___bit 14 +#define reg_pinmux_rw_pd_gio___pd15___lsb 15 +#define reg_pinmux_rw_pd_gio___pd15___width 1 +#define reg_pinmux_rw_pd_gio___pd15___bit 15 +#define reg_pinmux_rw_pd_gio___pd16___lsb 16 +#define reg_pinmux_rw_pd_gio___pd16___width 1 +#define reg_pinmux_rw_pd_gio___pd16___bit 16 +#define reg_pinmux_rw_pd_gio___pd17___lsb 17 +#define reg_pinmux_rw_pd_gio___pd17___width 1 +#define reg_pinmux_rw_pd_gio___pd17___bit 17 +#define reg_pinmux_rw_pd_gio_offset 24 + +/* Register rw_pd_iop, scope pinmux, type rw */ +#define reg_pinmux_rw_pd_iop___pd0___lsb 0 +#define reg_pinmux_rw_pd_iop___pd0___width 1 +#define reg_pinmux_rw_pd_iop___pd0___bit 0 +#define reg_pinmux_rw_pd_iop___pd1___lsb 1 +#define reg_pinmux_rw_pd_iop___pd1___width 1 +#define reg_pinmux_rw_pd_iop___pd1___bit 1 +#define reg_pinmux_rw_pd_iop___pd2___lsb 2 +#define reg_pinmux_rw_pd_iop___pd2___width 1 +#define reg_pinmux_rw_pd_iop___pd2___bit 2 +#define reg_pinmux_rw_pd_iop___pd3___lsb 3 +#define reg_pinmux_rw_pd_iop___pd3___width 1 +#define reg_pinmux_rw_pd_iop___pd3___bit 3 +#define reg_pinmux_rw_pd_iop___pd4___lsb 4 +#define reg_pinmux_rw_pd_iop___pd4___width 1 +#define reg_pinmux_rw_pd_iop___pd4___bit 4 +#define reg_pinmux_rw_pd_iop___pd5___lsb 5 +#define reg_pinmux_rw_pd_iop___pd5___width 1 +#define reg_pinmux_rw_pd_iop___pd5___bit 5 +#define reg_pinmux_rw_pd_iop___pd6___lsb 6 +#define reg_pinmux_rw_pd_iop___pd6___width 1 +#define reg_pinmux_rw_pd_iop___pd6___bit 6 +#define reg_pinmux_rw_pd_iop___pd7___lsb 7 +#define reg_pinmux_rw_pd_iop___pd7___width 1 +#define reg_pinmux_rw_pd_iop___pd7___bit 7 +#define reg_pinmux_rw_pd_iop___pd8___lsb 8 +#define reg_pinmux_rw_pd_iop___pd8___width 1 +#define reg_pinmux_rw_pd_iop___pd8___bit 8 +#define reg_pinmux_rw_pd_iop___pd9___lsb 9 +#define reg_pinmux_rw_pd_iop___pd9___width 1 +#define reg_pinmux_rw_pd_iop___pd9___bit 9 +#define reg_pinmux_rw_pd_iop___pd10___lsb 10 +#define reg_pinmux_rw_pd_iop___pd10___width 1 +#define reg_pinmux_rw_pd_iop___pd10___bit 10 +#define reg_pinmux_rw_pd_iop___pd11___lsb 11 +#define reg_pinmux_rw_pd_iop___pd11___width 1 +#define reg_pinmux_rw_pd_iop___pd11___bit 11 +#define reg_pinmux_rw_pd_iop___pd12___lsb 12 +#define reg_pinmux_rw_pd_iop___pd12___width 1 +#define reg_pinmux_rw_pd_iop___pd12___bit 12 +#define reg_pinmux_rw_pd_iop___pd13___lsb 13 +#define reg_pinmux_rw_pd_iop___pd13___width 1 +#define reg_pinmux_rw_pd_iop___pd13___bit 13 +#define reg_pinmux_rw_pd_iop___pd14___lsb 14 +#define reg_pinmux_rw_pd_iop___pd14___width 1 +#define reg_pinmux_rw_pd_iop___pd14___bit 14 +#define reg_pinmux_rw_pd_iop___pd15___lsb 15 +#define reg_pinmux_rw_pd_iop___pd15___width 1 +#define reg_pinmux_rw_pd_iop___pd15___bit 15 +#define reg_pinmux_rw_pd_iop___pd16___lsb 16 +#define reg_pinmux_rw_pd_iop___pd16___width 1 +#define reg_pinmux_rw_pd_iop___pd16___bit 16 +#define reg_pinmux_rw_pd_iop___pd17___lsb 17 +#define reg_pinmux_rw_pd_iop___pd17___width 1 +#define reg_pinmux_rw_pd_iop___pd17___bit 17 +#define reg_pinmux_rw_pd_iop_offset 28 + +/* Register rw_pe_gio, scope pinmux, type rw */ +#define reg_pinmux_rw_pe_gio___pe0___lsb 0 +#define reg_pinmux_rw_pe_gio___pe0___width 1 +#define reg_pinmux_rw_pe_gio___pe0___bit 0 +#define reg_pinmux_rw_pe_gio___pe1___lsb 1 +#define reg_pinmux_rw_pe_gio___pe1___width 1 +#define reg_pinmux_rw_pe_gio___pe1___bit 1 +#define reg_pinmux_rw_pe_gio___pe2___lsb 2 +#define reg_pinmux_rw_pe_gio___pe2___width 1 +#define reg_pinmux_rw_pe_gio___pe2___bit 2 +#define reg_pinmux_rw_pe_gio___pe3___lsb 3 +#define reg_pinmux_rw_pe_gio___pe3___width 1 +#define reg_pinmux_rw_pe_gio___pe3___bit 3 +#define reg_pinmux_rw_pe_gio___pe4___lsb 4 +#define reg_pinmux_rw_pe_gio___pe4___width 1 +#define reg_pinmux_rw_pe_gio___pe4___bit 4 +#define reg_pinmux_rw_pe_gio___pe5___lsb 5 +#define reg_pinmux_rw_pe_gio___pe5___width 1 +#define reg_pinmux_rw_pe_gio___pe5___bit 5 +#define reg_pinmux_rw_pe_gio___pe6___lsb 6 +#define reg_pinmux_rw_pe_gio___pe6___width 1 +#define reg_pinmux_rw_pe_gio___pe6___bit 6 +#define reg_pinmux_rw_pe_gio___pe7___lsb 7 +#define reg_pinmux_rw_pe_gio___pe7___width 1 +#define reg_pinmux_rw_pe_gio___pe7___bit 7 +#define reg_pinmux_rw_pe_gio___pe8___lsb 8 +#define reg_pinmux_rw_pe_gio___pe8___width 1 +#define reg_pinmux_rw_pe_gio___pe8___bit 8 +#define reg_pinmux_rw_pe_gio___pe9___lsb 9 +#define reg_pinmux_rw_pe_gio___pe9___width 1 +#define reg_pinmux_rw_pe_gio___pe9___bit 9 +#define reg_pinmux_rw_pe_gio___pe10___lsb 10 +#define reg_pinmux_rw_pe_gio___pe10___width 1 +#define reg_pinmux_rw_pe_gio___pe10___bit 10 +#define reg_pinmux_rw_pe_gio___pe11___lsb 11 +#define reg_pinmux_rw_pe_gio___pe11___width 1 +#define reg_pinmux_rw_pe_gio___pe11___bit 11 +#define reg_pinmux_rw_pe_gio___pe12___lsb 12 +#define reg_pinmux_rw_pe_gio___pe12___width 1 +#define reg_pinmux_rw_pe_gio___pe12___bit 12 +#define reg_pinmux_rw_pe_gio___pe13___lsb 13 +#define reg_pinmux_rw_pe_gio___pe13___width 1 +#define reg_pinmux_rw_pe_gio___pe13___bit 13 +#define reg_pinmux_rw_pe_gio___pe14___lsb 14 +#define reg_pinmux_rw_pe_gio___pe14___width 1 +#define reg_pinmux_rw_pe_gio___pe14___bit 14 +#define reg_pinmux_rw_pe_gio___pe15___lsb 15 +#define reg_pinmux_rw_pe_gio___pe15___width 1 +#define reg_pinmux_rw_pe_gio___pe15___bit 15 +#define reg_pinmux_rw_pe_gio___pe16___lsb 16 +#define reg_pinmux_rw_pe_gio___pe16___width 1 +#define reg_pinmux_rw_pe_gio___pe16___bit 16 +#define reg_pinmux_rw_pe_gio___pe17___lsb 17 +#define reg_pinmux_rw_pe_gio___pe17___width 1 +#define reg_pinmux_rw_pe_gio___pe17___bit 17 +#define reg_pinmux_rw_pe_gio_offset 32 + +/* Register rw_pe_iop, scope pinmux, type rw */ +#define reg_pinmux_rw_pe_iop___pe0___lsb 0 +#define reg_pinmux_rw_pe_iop___pe0___width 1 +#define reg_pinmux_rw_pe_iop___pe0___bit 0 +#define reg_pinmux_rw_pe_iop___pe1___lsb 1 +#define reg_pinmux_rw_pe_iop___pe1___width 1 +#define reg_pinmux_rw_pe_iop___pe1___bit 1 +#define reg_pinmux_rw_pe_iop___pe2___lsb 2 +#define reg_pinmux_rw_pe_iop___pe2___width 1 +#define reg_pinmux_rw_pe_iop___pe2___bit 2 +#define reg_pinmux_rw_pe_iop___pe3___lsb 3 +#define reg_pinmux_rw_pe_iop___pe3___width 1 +#define reg_pinmux_rw_pe_iop___pe3___bit 3 +#define reg_pinmux_rw_pe_iop___pe4___lsb 4 +#define reg_pinmux_rw_pe_iop___pe4___width 1 +#define reg_pinmux_rw_pe_iop___pe4___bit 4 +#define reg_pinmux_rw_pe_iop___pe5___lsb 5 +#define reg_pinmux_rw_pe_iop___pe5___width 1 +#define reg_pinmux_rw_pe_iop___pe5___bit 5 +#define reg_pinmux_rw_pe_iop___pe6___lsb 6 +#define reg_pinmux_rw_pe_iop___pe6___width 1 +#define reg_pinmux_rw_pe_iop___pe6___bit 6 +#define reg_pinmux_rw_pe_iop___pe7___lsb 7 +#define reg_pinmux_rw_pe_iop___pe7___width 1 +#define reg_pinmux_rw_pe_iop___pe7___bit 7 +#define reg_pinmux_rw_pe_iop___pe8___lsb 8 +#define reg_pinmux_rw_pe_iop___pe8___width 1 +#define reg_pinmux_rw_pe_iop___pe8___bit 8 +#define reg_pinmux_rw_pe_iop___pe9___lsb 9 +#define reg_pinmux_rw_pe_iop___pe9___width 1 +#define reg_pinmux_rw_pe_iop___pe9___bit 9 +#define reg_pinmux_rw_pe_iop___pe10___lsb 10 +#define reg_pinmux_rw_pe_iop___pe10___width 1 +#define reg_pinmux_rw_pe_iop___pe10___bit 10 +#define reg_pinmux_rw_pe_iop___pe11___lsb 11 +#define reg_pinmux_rw_pe_iop___pe11___width 1 +#define reg_pinmux_rw_pe_iop___pe11___bit 11 +#define reg_pinmux_rw_pe_iop___pe12___lsb 12 +#define reg_pinmux_rw_pe_iop___pe12___width 1 +#define reg_pinmux_rw_pe_iop___pe12___bit 12 +#define reg_pinmux_rw_pe_iop___pe13___lsb 13 +#define reg_pinmux_rw_pe_iop___pe13___width 1 +#define reg_pinmux_rw_pe_iop___pe13___bit 13 +#define reg_pinmux_rw_pe_iop___pe14___lsb 14 +#define reg_pinmux_rw_pe_iop___pe14___width 1 +#define reg_pinmux_rw_pe_iop___pe14___bit 14 +#define reg_pinmux_rw_pe_iop___pe15___lsb 15 +#define reg_pinmux_rw_pe_iop___pe15___width 1 +#define reg_pinmux_rw_pe_iop___pe15___bit 15 +#define reg_pinmux_rw_pe_iop___pe16___lsb 16 +#define reg_pinmux_rw_pe_iop___pe16___width 1 +#define reg_pinmux_rw_pe_iop___pe16___bit 16 +#define reg_pinmux_rw_pe_iop___pe17___lsb 17 +#define reg_pinmux_rw_pe_iop___pe17___width 1 +#define reg_pinmux_rw_pe_iop___pe17___bit 17 +#define reg_pinmux_rw_pe_iop_offset 36 + +/* Register rw_usb_phy, scope pinmux, type rw */ +#define reg_pinmux_rw_usb_phy___en_usb0___lsb 0 +#define reg_pinmux_rw_usb_phy___en_usb0___width 1 +#define reg_pinmux_rw_usb_phy___en_usb0___bit 0 +#define reg_pinmux_rw_usb_phy___en_usb1___lsb 1 +#define reg_pinmux_rw_usb_phy___en_usb1___width 1 +#define reg_pinmux_rw_usb_phy___en_usb1___bit 1 +#define reg_pinmux_rw_usb_phy_offset 40 + + +/* Constants */ +#define regk_pinmux_no 0x00000000 +#define regk_pinmux_rw_hwprot_default 0x00000000 +#define regk_pinmux_rw_pa_default 0x00000000 +#define regk_pinmux_rw_pb_gio_default 0x00000000 +#define regk_pinmux_rw_pb_iop_default 0x00000000 +#define regk_pinmux_rw_pc_gio_default 0x00000000 +#define regk_pinmux_rw_pc_iop_default 0x00000000 +#define regk_pinmux_rw_pd_gio_default 0x00000000 +#define regk_pinmux_rw_pd_iop_default 0x00000000 +#define regk_pinmux_rw_pe_gio_default 0x00000000 +#define regk_pinmux_rw_pe_iop_default 0x00000000 +#define regk_pinmux_rw_usb_phy_default 0x00000000 +#define regk_pinmux_yes 0x00000001 +#endif /* __pinmux_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/reg_map_asm.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/reg_map_asm.h new file mode 100644 index 000000000000..87517aebd2cb --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/reg_map_asm.h @@ -0,0 +1,96 @@ +#ifndef __reg_map_h +#define __reg_map_h + +/* + * This file is autogenerated from + * file: ../../mod/fakereg.rmap + * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp + * last modified: Wed Feb 11 20:53:25 2004 + * file: ../../rtl/global.rmap + * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp + * last modified: Mon Aug 18 17:08:23 2003 + * file: ../../mod/modreg.rmap + * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp + * last modified: Fri Feb 20 16:40:04 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/reg_map_asm.h -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap + * id: $Id: reg_map_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +#define regi_artpec_mod 0xb7044000 +#define regi_ata 0xb0032000 +#define regi_ata_mod 0xb7006000 +#define regi_barber 0xb701a000 +#define regi_bif_core 0xb0014000 +#define regi_bif_dma 0xb0016000 +#define regi_bif_slave 0xb0018000 +#define regi_bif_slave_ext 0xac000000 +#define regi_bus_master 0xb703c000 +#define regi_config 0xb003c000 +#define regi_dma0 0xb0000000 +#define regi_dma1 0xb0002000 +#define regi_dma2 0xb0004000 +#define regi_dma3 0xb0006000 +#define regi_dma4 0xb0008000 +#define regi_dma5 0xb000a000 +#define regi_dma6 0xb000c000 +#define regi_dma7 0xb000e000 +#define regi_dma8 0xb0010000 +#define regi_dma9 0xb0012000 +#define regi_eth0 0xb0034000 +#define regi_eth1 0xb0036000 +#define regi_eth_mod 0xb7004000 +#define regi_eth_mod1 0xb701c000 +#define regi_eth_strmod 0xb7008000 +#define regi_eth_strmod1 0xb7032000 +#define regi_ext_dma 0xb703a000 +#define regi_ext_mem 0xb7046000 +#define regi_gen_io 0xb7016000 +#define regi_gio 0xb001a000 +#define regi_hook 0xb7000000 +#define regi_iop 0xb0020000 +#define regi_irq 0xb001c000 +#define regi_irq_nmi 0xb701e000 +#define regi_marb 0xb003e000 +#define regi_marb_bp0 0xb003e240 +#define regi_marb_bp1 0xb003e280 +#define regi_marb_bp2 0xb003e2c0 +#define regi_marb_bp3 0xb003e300 +#define regi_nand_mod 0xb7014000 +#define regi_p21 0xb002e000 +#define regi_p21_mod 0xb7042000 +#define regi_pci_mod 0xb7010000 +#define regi_pin_test 0xb7018000 +#define regi_pinmux 0xb0038000 +#define regi_sdram_chk 0xb703e000 +#define regi_sdram_mod 0xb7012000 +#define regi_ser0 0xb0026000 +#define regi_ser1 0xb0028000 +#define regi_ser2 0xb002a000 +#define regi_ser3 0xb002c000 +#define regi_ser_mod0 0xb7020000 +#define regi_ser_mod1 0xb7022000 +#define regi_ser_mod2 0xb7024000 +#define regi_ser_mod3 0xb7026000 +#define regi_smif_stat 0xb700e000 +#define regi_sser0 0xb0022000 +#define regi_sser1 0xb0024000 +#define regi_sser_mod0 0xb700a000 +#define regi_sser_mod1 0xb700c000 +#define regi_strcop 0xb0030000 +#define regi_strmux 0xb003a000 +#define regi_strmux_tst 0xb7040000 +#define regi_tap 0xb7002000 +#define regi_timer 0xb001e000 +#define regi_timer_mod 0xb7034000 +#define regi_trace 0xb0040000 +#define regi_usb0 0xb7028000 +#define regi_usb1 0xb702a000 +#define regi_usb2 0xb702c000 +#define regi_usb3 0xb702e000 +#define regi_usb_dev 0xb7030000 +#define regi_utmi_mod0 0xb7036000 +#define regi_utmi_mod1 0xb7038000 +#endif /* __reg_map_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/timer_defs_asm.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/timer_defs_asm.h new file mode 100644 index 000000000000..e1197194d5c1 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/asm/timer_defs_asm.h @@ -0,0 +1,229 @@ +#ifndef __timer_defs_asm_h +#define __timer_defs_asm_h + +/* + * This file is autogenerated from + * file: ../../inst/timer/rtl/timer_regs.r + * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp + * last modfied: Mon Apr 11 16:09:53 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/timer_defs_asm.h ../../inst/timer/rtl/timer_regs.r + * id: $Id: timer_defs_asm.h,v 1.1 2007/04/11 13:51:01 ricardw Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ + +#ifndef REG_FIELD +#define REG_FIELD( scope, reg, field, value ) \ + REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_FIELD_X_( value, shift ) ((value) << shift) +#endif + +#ifndef REG_STATE +#define REG_STATE( scope, reg, field, symbolic_value ) \ + REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) +#define REG_STATE_X_( k, shift ) (k << shift) +#endif + +#ifndef REG_MASK +#define REG_MASK( scope, reg, field ) \ + REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) +#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) +#endif + +#ifndef REG_LSB +#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb +#endif + +#ifndef REG_BIT +#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) +#define REG_ADDR_X_( inst, offs ) ((inst) + offs) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ + STRIDE_##scope##_##reg ) +#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ + ((inst) + offs + (index) * stride) +#endif + +/* Register rw_tmr0_div, scope timer, type rw */ +#define reg_timer_rw_tmr0_div_offset 0 + +/* Register r_tmr0_data, scope timer, type r */ +#define reg_timer_r_tmr0_data_offset 4 + +/* Register rw_tmr0_ctrl, scope timer, type rw */ +#define reg_timer_rw_tmr0_ctrl___op___lsb 0 +#define reg_timer_rw_tmr0_ctrl___op___width 2 +#define reg_timer_rw_tmr0_ctrl___freq___lsb 2 +#define reg_timer_rw_tmr0_ctrl___freq___width 3 +#define reg_timer_rw_tmr0_ctrl_offset 8 + +/* Register rw_tmr1_div, scope timer, type rw */ +#define reg_timer_rw_tmr1_div_offset 16 + +/* Register r_tmr1_data, scope timer, type r */ +#define reg_timer_r_tmr1_data_offset 20 + +/* Register rw_tmr1_ctrl, scope timer, type rw */ +#define reg_timer_rw_tmr1_ctrl___op___lsb 0 +#define reg_timer_rw_tmr1_ctrl___op___width 2 +#define reg_timer_rw_tmr1_ctrl___freq___lsb 2 +#define reg_timer_rw_tmr1_ctrl___freq___width 3 +#define reg_timer_rw_tmr1_ctrl_offset 24 + +/* Register rs_cnt_data, scope timer, type rs */ +#define reg_timer_rs_cnt_data___tmr___lsb 0 +#define reg_timer_rs_cnt_data___tmr___width 24 +#define reg_timer_rs_cnt_data___cnt___lsb 24 +#define reg_timer_rs_cnt_data___cnt___width 8 +#define reg_timer_rs_cnt_data_offset 32 + +/* Register r_cnt_data, scope timer, type r */ +#define reg_timer_r_cnt_data___tmr___lsb 0 +#define reg_timer_r_cnt_data___tmr___width 24 +#define reg_timer_r_cnt_data___cnt___lsb 24 +#define reg_timer_r_cnt_data___cnt___width 8 +#define reg_timer_r_cnt_data_offset 36 + +/* Register rw_cnt_cfg, scope timer, type rw */ +#define reg_timer_rw_cnt_cfg___clk___lsb 0 +#define reg_timer_rw_cnt_cfg___clk___width 2 +#define reg_timer_rw_cnt_cfg_offset 40 + +/* Register rw_trig, scope timer, type rw */ +#define reg_timer_rw_trig_offset 48 + +/* Register rw_trig_cfg, scope timer, type rw */ +#define reg_timer_rw_trig_cfg___tmr___lsb 0 +#define reg_timer_rw_trig_cfg___tmr___width 2 +#define reg_timer_rw_trig_cfg_offset 52 + +/* Register r_time, scope timer, type r */ +#define reg_timer_r_time_offset 56 + +/* Register rw_out, scope timer, type rw */ +#define reg_timer_rw_out___tmr___lsb 0 +#define reg_timer_rw_out___tmr___width 2 +#define reg_timer_rw_out_offset 60 + +/* Register rw_wd_ctrl, scope timer, type rw */ +#define reg_timer_rw_wd_ctrl___cnt___lsb 0 +#define reg_timer_rw_wd_ctrl___cnt___width 8 +#define reg_timer_rw_wd_ctrl___cmd___lsb 8 +#define reg_timer_rw_wd_ctrl___cmd___width 1 +#define reg_timer_rw_wd_ctrl___cmd___bit 8 +#define reg_timer_rw_wd_ctrl___key___lsb 9 +#define reg_timer_rw_wd_ctrl___key___width 7 +#define reg_timer_rw_wd_ctrl_offset 64 + +/* Register r_wd_stat, scope timer, type r */ +#define reg_timer_r_wd_stat___cnt___lsb 0 +#define reg_timer_r_wd_stat___cnt___width 8 +#define reg_timer_r_wd_stat___cmd___lsb 8 +#define reg_timer_r_wd_stat___cmd___width 1 +#define reg_timer_r_wd_stat___cmd___bit 8 +#define reg_timer_r_wd_stat_offset 68 + +/* Register rw_intr_mask, scope timer, type rw */ +#define reg_timer_rw_intr_mask___tmr0___lsb 0 +#define reg_timer_rw_intr_mask___tmr0___width 1 +#define reg_timer_rw_intr_mask___tmr0___bit 0 +#define reg_timer_rw_intr_mask___tmr1___lsb 1 +#define reg_timer_rw_intr_mask___tmr1___width 1 +#define reg_timer_rw_intr_mask___tmr1___bit 1 +#define reg_timer_rw_intr_mask___cnt___lsb 2 +#define reg_timer_rw_intr_mask___cnt___width 1 +#define reg_timer_rw_intr_mask___cnt___bit 2 +#define reg_timer_rw_intr_mask___trig___lsb 3 +#define reg_timer_rw_intr_mask___trig___width 1 +#define reg_timer_rw_intr_mask___trig___bit 3 +#define reg_timer_rw_intr_mask_offset 72 + +/* Register rw_ack_intr, scope timer, type rw */ +#define reg_timer_rw_ack_intr___tmr0___lsb 0 +#define reg_timer_rw_ack_intr___tmr0___width 1 +#define reg_timer_rw_ack_intr___tmr0___bit 0 +#define reg_timer_rw_ack_intr___tmr1___lsb 1 +#define reg_timer_rw_ack_intr___tmr1___width 1 +#define reg_timer_rw_ack_intr___tmr1___bit 1 +#define reg_timer_rw_ack_intr___cnt___lsb 2 +#define reg_timer_rw_ack_intr___cnt___width 1 +#define reg_timer_rw_ack_intr___cnt___bit 2 +#define reg_timer_rw_ack_intr___trig___lsb 3 +#define reg_timer_rw_ack_intr___trig___width 1 +#define reg_timer_rw_ack_intr___trig___bit 3 +#define reg_timer_rw_ack_intr_offset 76 + +/* Register r_intr, scope timer, type r */ +#define reg_timer_r_intr___tmr0___lsb 0 +#define reg_timer_r_intr___tmr0___width 1 +#define reg_timer_r_intr___tmr0___bit 0 +#define reg_timer_r_intr___tmr1___lsb 1 +#define reg_timer_r_intr___tmr1___width 1 +#define reg_timer_r_intr___tmr1___bit 1 +#define reg_timer_r_intr___cnt___lsb 2 +#define reg_timer_r_intr___cnt___width 1 +#define reg_timer_r_intr___cnt___bit 2 +#define reg_timer_r_intr___trig___lsb 3 +#define reg_timer_r_intr___trig___width 1 +#define reg_timer_r_intr___trig___bit 3 +#define reg_timer_r_intr_offset 80 + +/* Register r_masked_intr, scope timer, type r */ +#define reg_timer_r_masked_intr___tmr0___lsb 0 +#define reg_timer_r_masked_intr___tmr0___width 1 +#define reg_timer_r_masked_intr___tmr0___bit 0 +#define reg_timer_r_masked_intr___tmr1___lsb 1 +#define reg_timer_r_masked_intr___tmr1___width 1 +#define reg_timer_r_masked_intr___tmr1___bit 1 +#define reg_timer_r_masked_intr___cnt___lsb 2 +#define reg_timer_r_masked_intr___cnt___width 1 +#define reg_timer_r_masked_intr___cnt___bit 2 +#define reg_timer_r_masked_intr___trig___lsb 3 +#define reg_timer_r_masked_intr___trig___width 1 +#define reg_timer_r_masked_intr___trig___bit 3 +#define reg_timer_r_masked_intr_offset 84 + +/* Register rw_test, scope timer, type rw */ +#define reg_timer_rw_test___dis___lsb 0 +#define reg_timer_rw_test___dis___width 1 +#define reg_timer_rw_test___dis___bit 0 +#define reg_timer_rw_test___en___lsb 1 +#define reg_timer_rw_test___en___width 1 +#define reg_timer_rw_test___en___bit 1 +#define reg_timer_rw_test_offset 88 + + +/* Constants */ +#define regk_timer_ext 0x00000001 +#define regk_timer_f100 0x00000007 +#define regk_timer_f29_493 0x00000004 +#define regk_timer_f32 0x00000005 +#define regk_timer_f32_768 0x00000006 +#define regk_timer_hold 0x00000001 +#define regk_timer_ld 0x00000000 +#define regk_timer_no 0x00000000 +#define regk_timer_off 0x00000000 +#define regk_timer_run 0x00000002 +#define regk_timer_rw_cnt_cfg_default 0x00000000 +#define regk_timer_rw_intr_mask_default 0x00000000 +#define regk_timer_rw_out_default 0x00000000 +#define regk_timer_rw_test_default 0x00000000 +#define regk_timer_rw_tmr0_ctrl_default 0x00000000 +#define regk_timer_rw_tmr1_ctrl_default 0x00000000 +#define regk_timer_rw_trig_cfg_default 0x00000000 +#define regk_timer_start 0x00000001 +#define regk_timer_stop 0x00000000 +#define regk_timer_time 0x00000001 +#define regk_timer_tmr0 0x00000002 +#define regk_timer_tmr1 0x00000003 +#define regk_timer_yes 0x00000001 +#endif /* __timer_defs_asm_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_core_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_core_defs.h new file mode 100644 index 000000000000..44362a62b47c --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_core_defs.h @@ -0,0 +1,284 @@ +#ifndef __bif_core_defs_h +#define __bif_core_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_core_regs.r + * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp + * last modfied: Mon Apr 11 16:06:33 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_core_defs.h ../../inst/bif/rtl/bif_core_regs.r + * id: $Id: bif_core_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope bif_core */ + +/* Register rw_grp1_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 10; +} reg_bif_core_rw_grp1_cfg; +#define REG_RD_ADDR_bif_core_rw_grp1_cfg 0 +#define REG_WR_ADDR_bif_core_rw_grp1_cfg 0 + +/* Register rw_grp2_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 10; +} reg_bif_core_rw_grp2_cfg; +#define REG_RD_ADDR_bif_core_rw_grp2_cfg 4 +#define REG_WR_ADDR_bif_core_rw_grp2_cfg 4 + +/* Register rw_grp3_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 2; + unsigned int gated_csp0 : 2; + unsigned int gated_csp1 : 2; + unsigned int gated_csp2 : 2; + unsigned int gated_csp3 : 2; +} reg_bif_core_rw_grp3_cfg; +#define REG_RD_ADDR_bif_core_rw_grp3_cfg 8 +#define REG_WR_ADDR_bif_core_rw_grp3_cfg 8 + +/* Register rw_grp4_cfg, scope bif_core, type rw */ +typedef struct { + unsigned int lw : 6; + unsigned int ew : 3; + unsigned int zw : 3; + unsigned int aw : 2; + unsigned int dw : 2; + unsigned int ewb : 2; + unsigned int bw : 1; + unsigned int wr_extend : 1; + unsigned int erc_en : 1; + unsigned int mode : 1; + unsigned int dummy1 : 4; + unsigned int gated_csp4 : 2; + unsigned int gated_csp5 : 2; + unsigned int gated_csp6 : 2; +} reg_bif_core_rw_grp4_cfg; +#define REG_RD_ADDR_bif_core_rw_grp4_cfg 12 +#define REG_WR_ADDR_bif_core_rw_grp4_cfg 12 + +/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */ +typedef struct { + unsigned int bank_sel : 5; + unsigned int ca : 3; + unsigned int type : 1; + unsigned int bw : 1; + unsigned int sh : 3; + unsigned int wmm : 1; + unsigned int sh16 : 1; + unsigned int grp_sel : 5; + unsigned int dummy1 : 12; +} reg_bif_core_rw_sdram_cfg_grp0; +#define REG_RD_ADDR_bif_core_rw_sdram_cfg_grp0 16 +#define REG_WR_ADDR_bif_core_rw_sdram_cfg_grp0 16 + +/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */ +typedef struct { + unsigned int bank_sel : 5; + unsigned int ca : 3; + unsigned int type : 1; + unsigned int bw : 1; + unsigned int sh : 3; + unsigned int wmm : 1; + unsigned int sh16 : 1; + unsigned int dummy1 : 17; +} reg_bif_core_rw_sdram_cfg_grp1; +#define REG_RD_ADDR_bif_core_rw_sdram_cfg_grp1 20 +#define REG_WR_ADDR_bif_core_rw_sdram_cfg_grp1 20 + +/* Register rw_sdram_timing, scope bif_core, type rw */ +typedef struct { + unsigned int cl : 3; + unsigned int rcd : 3; + unsigned int rp : 3; + unsigned int rc : 2; + unsigned int dpl : 2; + unsigned int pde : 1; + unsigned int ref : 2; + unsigned int cpd : 1; + unsigned int sdcke : 1; + unsigned int sdclk : 1; + unsigned int dummy1 : 13; +} reg_bif_core_rw_sdram_timing; +#define REG_RD_ADDR_bif_core_rw_sdram_timing 24 +#define REG_WR_ADDR_bif_core_rw_sdram_timing 24 + +/* Register rw_sdram_cmd, scope bif_core, type rw */ +typedef struct { + unsigned int cmd : 3; + unsigned int mrs_data : 15; + unsigned int dummy1 : 14; +} reg_bif_core_rw_sdram_cmd; +#define REG_RD_ADDR_bif_core_rw_sdram_cmd 28 +#define REG_WR_ADDR_bif_core_rw_sdram_cmd 28 + +/* Register rs_sdram_ref_stat, scope bif_core, type rs */ +typedef struct { + unsigned int ok : 1; + unsigned int dummy1 : 31; +} reg_bif_core_rs_sdram_ref_stat; +#define REG_RD_ADDR_bif_core_rs_sdram_ref_stat 32 + +/* Register r_sdram_ref_stat, scope bif_core, type r */ +typedef struct { + unsigned int ok : 1; + unsigned int dummy1 : 31; +} reg_bif_core_r_sdram_ref_stat; +#define REG_RD_ADDR_bif_core_r_sdram_ref_stat 36 + + +/* Constants */ +enum { + regk_bif_core_bank2 = 0x00000000, + regk_bif_core_bank4 = 0x00000001, + regk_bif_core_bit10 = 0x0000000a, + regk_bif_core_bit11 = 0x0000000b, + regk_bif_core_bit12 = 0x0000000c, + regk_bif_core_bit13 = 0x0000000d, + regk_bif_core_bit14 = 0x0000000e, + regk_bif_core_bit15 = 0x0000000f, + regk_bif_core_bit16 = 0x00000010, + regk_bif_core_bit17 = 0x00000011, + regk_bif_core_bit18 = 0x00000012, + regk_bif_core_bit19 = 0x00000013, + regk_bif_core_bit20 = 0x00000014, + regk_bif_core_bit21 = 0x00000015, + regk_bif_core_bit22 = 0x00000016, + regk_bif_core_bit23 = 0x00000017, + regk_bif_core_bit24 = 0x00000018, + regk_bif_core_bit25 = 0x00000019, + regk_bif_core_bit26 = 0x0000001a, + regk_bif_core_bit27 = 0x0000001b, + regk_bif_core_bit28 = 0x0000001c, + regk_bif_core_bit29 = 0x0000001d, + regk_bif_core_bit9 = 0x00000009, + regk_bif_core_bw16 = 0x00000001, + regk_bif_core_bw32 = 0x00000000, + regk_bif_core_bwe = 0x00000000, + regk_bif_core_cwe = 0x00000001, + regk_bif_core_e15us = 0x00000001, + regk_bif_core_e7800ns = 0x00000002, + regk_bif_core_grp0 = 0x00000000, + regk_bif_core_grp1 = 0x00000001, + regk_bif_core_mrs = 0x00000003, + regk_bif_core_no = 0x00000000, + regk_bif_core_none = 0x00000000, + regk_bif_core_nop = 0x00000000, + regk_bif_core_off = 0x00000000, + regk_bif_core_pre = 0x00000002, + regk_bif_core_r_sdram_ref_stat_default = 0x00000001, + regk_bif_core_rd = 0x00000002, + regk_bif_core_ref = 0x00000001, + regk_bif_core_rs_sdram_ref_stat_default = 0x00000001, + regk_bif_core_rw_grp1_cfg_default = 0x000006cf, + regk_bif_core_rw_grp2_cfg_default = 0x000006cf, + regk_bif_core_rw_grp3_cfg_default = 0x000006cf, + regk_bif_core_rw_grp4_cfg_default = 0x000006cf, + regk_bif_core_rw_sdram_cfg_grp1_default = 0x00000000, + regk_bif_core_slf = 0x00000004, + regk_bif_core_wr = 0x00000001, + regk_bif_core_yes = 0x00000001 +}; +#endif /* __bif_core_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_dma_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_dma_defs.h new file mode 100644 index 000000000000..3cb51a09dba7 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_dma_defs.h @@ -0,0 +1,473 @@ +#ifndef __bif_dma_defs_h +#define __bif_dma_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_dma_regs.r + * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp + * last modfied: Mon Apr 11 16:06:33 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_dma_defs.h ../../inst/bif/rtl/bif_dma_regs.r + * id: $Id: bif_dma_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope bif_dma */ + +/* Register rw_ch0_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_pad : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int wr_all : 1; + unsigned int dummy1 : 12; +} reg_bif_dma_rw_ch0_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch0_ctrl 0 +#define REG_WR_ADDR_bif_dma_rw_ch0_ctrl 0 + +/* Register rw_ch0_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch0_addr; +#define REG_RD_ADDR_bif_dma_rw_ch0_addr 4 +#define REG_WR_ADDR_bif_dma_rw_ch0_addr 4 + +/* Register rw_ch0_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch0_start; +#define REG_RD_ADDR_bif_dma_rw_ch0_start 8 +#define REG_WR_ADDR_bif_dma_rw_ch0_start 8 + +/* Register rw_ch0_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch0_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch0_cnt 12 +#define REG_WR_ADDR_bif_dma_rw_ch0_cnt 12 + +/* Register r_ch0_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch0_stat; +#define REG_RD_ADDR_bif_dma_r_ch0_stat 16 + +/* Register rw_ch1_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_discard : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int dummy1 : 13; +} reg_bif_dma_rw_ch1_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch1_ctrl 32 +#define REG_WR_ADDR_bif_dma_rw_ch1_ctrl 32 + +/* Register rw_ch1_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch1_addr; +#define REG_RD_ADDR_bif_dma_rw_ch1_addr 36 +#define REG_WR_ADDR_bif_dma_rw_ch1_addr 36 + +/* Register rw_ch1_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch1_start; +#define REG_RD_ADDR_bif_dma_rw_ch1_start 40 +#define REG_WR_ADDR_bif_dma_rw_ch1_start 40 + +/* Register rw_ch1_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch1_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch1_cnt 44 +#define REG_WR_ADDR_bif_dma_rw_ch1_cnt 44 + +/* Register r_ch1_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch1_stat; +#define REG_RD_ADDR_bif_dma_r_ch1_stat 48 + +/* Register rw_ch2_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_pad : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int wr_all : 1; + unsigned int dummy1 : 12; +} reg_bif_dma_rw_ch2_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch2_ctrl 64 +#define REG_WR_ADDR_bif_dma_rw_ch2_ctrl 64 + +/* Register rw_ch2_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch2_addr; +#define REG_RD_ADDR_bif_dma_rw_ch2_addr 68 +#define REG_WR_ADDR_bif_dma_rw_ch2_addr 68 + +/* Register rw_ch2_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch2_start; +#define REG_RD_ADDR_bif_dma_rw_ch2_start 72 +#define REG_WR_ADDR_bif_dma_rw_ch2_start 72 + +/* Register rw_ch2_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch2_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch2_cnt 76 +#define REG_WR_ADDR_bif_dma_rw_ch2_cnt 76 + +/* Register r_ch2_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch2_stat; +#define REG_RD_ADDR_bif_dma_r_ch2_stat 80 + +/* Register rw_ch3_ctrl, scope bif_dma, type rw */ +typedef struct { + unsigned int bw : 2; + unsigned int burst_len : 1; + unsigned int cont : 1; + unsigned int end_discard : 1; + unsigned int cnt : 1; + unsigned int dreq_pin : 3; + unsigned int dreq_mode : 2; + unsigned int tc_in_pin : 3; + unsigned int tc_in_mode : 2; + unsigned int bus_mode : 2; + unsigned int rate_en : 1; + unsigned int dummy1 : 13; +} reg_bif_dma_rw_ch3_ctrl; +#define REG_RD_ADDR_bif_dma_rw_ch3_ctrl 96 +#define REG_WR_ADDR_bif_dma_rw_ch3_ctrl 96 + +/* Register rw_ch3_addr, scope bif_dma, type rw */ +typedef struct { + unsigned int addr : 32; +} reg_bif_dma_rw_ch3_addr; +#define REG_RD_ADDR_bif_dma_rw_ch3_addr 100 +#define REG_WR_ADDR_bif_dma_rw_ch3_addr 100 + +/* Register rw_ch3_start, scope bif_dma, type rw */ +typedef struct { + unsigned int run : 1; + unsigned int dummy1 : 31; +} reg_bif_dma_rw_ch3_start; +#define REG_RD_ADDR_bif_dma_rw_ch3_start 104 +#define REG_WR_ADDR_bif_dma_rw_ch3_start 104 + +/* Register rw_ch3_cnt, scope bif_dma, type rw */ +typedef struct { + unsigned int start_cnt : 16; + unsigned int dummy1 : 16; +} reg_bif_dma_rw_ch3_cnt; +#define REG_RD_ADDR_bif_dma_rw_ch3_cnt 108 +#define REG_WR_ADDR_bif_dma_rw_ch3_cnt 108 + +/* Register r_ch3_stat, scope bif_dma, type r */ +typedef struct { + unsigned int cnt : 16; + unsigned int dummy1 : 15; + unsigned int run : 1; +} reg_bif_dma_r_ch3_stat; +#define REG_RD_ADDR_bif_dma_r_ch3_stat 112 + +/* Register rw_intr_mask, scope bif_dma, type rw */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_rw_intr_mask; +#define REG_RD_ADDR_bif_dma_rw_intr_mask 128 +#define REG_WR_ADDR_bif_dma_rw_intr_mask 128 + +/* Register rw_ack_intr, scope bif_dma, type rw */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_rw_ack_intr; +#define REG_RD_ADDR_bif_dma_rw_ack_intr 132 +#define REG_WR_ADDR_bif_dma_rw_ack_intr 132 + +/* Register r_intr, scope bif_dma, type r */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_r_intr; +#define REG_RD_ADDR_bif_dma_r_intr 136 + +/* Register r_masked_intr, scope bif_dma, type r */ +typedef struct { + unsigned int ext_dma0 : 1; + unsigned int ext_dma1 : 1; + unsigned int ext_dma2 : 1; + unsigned int ext_dma3 : 1; + unsigned int dummy1 : 28; +} reg_bif_dma_r_masked_intr; +#define REG_RD_ADDR_bif_dma_r_masked_intr 140 + +/* Register rw_pin0_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin0_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin0_cfg 160 +#define REG_WR_ADDR_bif_dma_rw_pin0_cfg 160 + +/* Register rw_pin1_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin1_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin1_cfg 164 +#define REG_WR_ADDR_bif_dma_rw_pin1_cfg 164 + +/* Register rw_pin2_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin2_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin2_cfg 168 +#define REG_WR_ADDR_bif_dma_rw_pin2_cfg 168 + +/* Register rw_pin3_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin3_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin3_cfg 172 +#define REG_WR_ADDR_bif_dma_rw_pin3_cfg 172 + +/* Register rw_pin4_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin4_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin4_cfg 176 +#define REG_WR_ADDR_bif_dma_rw_pin4_cfg 176 + +/* Register rw_pin5_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin5_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin5_cfg 180 +#define REG_WR_ADDR_bif_dma_rw_pin5_cfg 180 + +/* Register rw_pin6_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin6_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin6_cfg 184 +#define REG_WR_ADDR_bif_dma_rw_pin6_cfg 184 + +/* Register rw_pin7_cfg, scope bif_dma, type rw */ +typedef struct { + unsigned int master_ch : 2; + unsigned int master_mode : 3; + unsigned int slave_ch : 2; + unsigned int slave_mode : 3; + unsigned int dummy1 : 22; +} reg_bif_dma_rw_pin7_cfg; +#define REG_RD_ADDR_bif_dma_rw_pin7_cfg 188 +#define REG_WR_ADDR_bif_dma_rw_pin7_cfg 188 + +/* Register r_pin_stat, scope bif_dma, type r */ +typedef struct { + unsigned int pin0 : 1; + unsigned int pin1 : 1; + unsigned int pin2 : 1; + unsigned int pin3 : 1; + unsigned int pin4 : 1; + unsigned int pin5 : 1; + unsigned int pin6 : 1; + unsigned int pin7 : 1; + unsigned int dummy1 : 24; +} reg_bif_dma_r_pin_stat; +#define REG_RD_ADDR_bif_dma_r_pin_stat 192 + + +/* Constants */ +enum { + regk_bif_dma_as_master = 0x00000001, + regk_bif_dma_as_slave = 0x00000001, + regk_bif_dma_burst1 = 0x00000000, + regk_bif_dma_burst8 = 0x00000001, + regk_bif_dma_bw16 = 0x00000001, + regk_bif_dma_bw32 = 0x00000002, + regk_bif_dma_bw8 = 0x00000000, + regk_bif_dma_dack = 0x00000006, + regk_bif_dma_dack_inv = 0x00000007, + regk_bif_dma_force = 0x00000001, + regk_bif_dma_hi = 0x00000003, + regk_bif_dma_inv = 0x00000003, + regk_bif_dma_lo = 0x00000002, + regk_bif_dma_master = 0x00000001, + regk_bif_dma_no = 0x00000000, + regk_bif_dma_norm = 0x00000002, + regk_bif_dma_off = 0x00000000, + regk_bif_dma_rw_ch0_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch0_start_default = 0x00000000, + regk_bif_dma_rw_ch1_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch1_start_default = 0x00000000, + regk_bif_dma_rw_ch2_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch2_start_default = 0x00000000, + regk_bif_dma_rw_ch3_ctrl_default = 0x00000000, + regk_bif_dma_rw_ch3_start_default = 0x00000000, + regk_bif_dma_rw_intr_mask_default = 0x00000000, + regk_bif_dma_rw_pin0_cfg_default = 0x00000000, + regk_bif_dma_rw_pin1_cfg_default = 0x00000000, + regk_bif_dma_rw_pin2_cfg_default = 0x00000000, + regk_bif_dma_rw_pin3_cfg_default = 0x00000000, + regk_bif_dma_rw_pin4_cfg_default = 0x00000000, + regk_bif_dma_rw_pin5_cfg_default = 0x00000000, + regk_bif_dma_rw_pin6_cfg_default = 0x00000000, + regk_bif_dma_rw_pin7_cfg_default = 0x00000000, + regk_bif_dma_slave = 0x00000002, + regk_bif_dma_sreq = 0x00000006, + regk_bif_dma_sreq_inv = 0x00000007, + regk_bif_dma_tc = 0x00000004, + regk_bif_dma_tc_inv = 0x00000005, + regk_bif_dma_yes = 0x00000001 +}; +#endif /* __bif_dma_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_slave_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_slave_defs.h new file mode 100644 index 000000000000..0c434585a3f9 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/bif_slave_defs.h @@ -0,0 +1,249 @@ +#ifndef __bif_slave_defs_h +#define __bif_slave_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_slave_regs.r + * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp + * last modfied: Mon Apr 11 16:06:34 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_slave_defs.h ../../inst/bif/rtl/bif_slave_regs.r + * id: $Id: bif_slave_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope bif_slave */ + +/* Register rw_slave_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int slave_id : 3; + unsigned int use_slave_id : 1; + unsigned int boot_rdy : 1; + unsigned int loopback : 1; + unsigned int dis : 1; + unsigned int dummy1 : 25; +} reg_bif_slave_rw_slave_cfg; +#define REG_RD_ADDR_bif_slave_rw_slave_cfg 0 +#define REG_WR_ADDR_bif_slave_rw_slave_cfg 0 + +/* Register r_slave_mode, scope bif_slave, type r */ +typedef struct { + unsigned int ch0_mode : 1; + unsigned int ch1_mode : 1; + unsigned int ch2_mode : 1; + unsigned int ch3_mode : 1; + unsigned int dummy1 : 28; +} reg_bif_slave_r_slave_mode; +#define REG_RD_ADDR_bif_slave_r_slave_mode 4 + +/* Register rw_ch0_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch0_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch0_cfg 16 +#define REG_WR_ADDR_bif_slave_rw_ch0_cfg 16 + +/* Register rw_ch1_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch1_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch1_cfg 20 +#define REG_WR_ADDR_bif_slave_rw_ch1_cfg 20 + +/* Register rw_ch2_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch2_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch2_cfg 24 +#define REG_WR_ADDR_bif_slave_rw_ch2_cfg 24 + +/* Register rw_ch3_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int rd_hold : 2; + unsigned int access_mode : 1; + unsigned int access_ctrl : 1; + unsigned int data_cs : 2; + unsigned int dummy1 : 26; +} reg_bif_slave_rw_ch3_cfg; +#define REG_RD_ADDR_bif_slave_rw_ch3_cfg 28 +#define REG_WR_ADDR_bif_slave_rw_ch3_cfg 28 + +/* Register rw_arb_cfg, scope bif_slave, type rw */ +typedef struct { + unsigned int brin_mode : 1; + unsigned int brout_mode : 3; + unsigned int bg_mode : 3; + unsigned int release : 2; + unsigned int acquire : 1; + unsigned int settle_time : 2; + unsigned int dram_ctrl : 1; + unsigned int dummy1 : 19; +} reg_bif_slave_rw_arb_cfg; +#define REG_RD_ADDR_bif_slave_rw_arb_cfg 32 +#define REG_WR_ADDR_bif_slave_rw_arb_cfg 32 + +/* Register r_arb_stat, scope bif_slave, type r */ +typedef struct { + unsigned int init_mode : 1; + unsigned int mode : 1; + unsigned int brin : 1; + unsigned int brout : 1; + unsigned int bg : 1; + unsigned int dummy1 : 27; +} reg_bif_slave_r_arb_stat; +#define REG_RD_ADDR_bif_slave_r_arb_stat 36 + +/* Register rw_intr_mask, scope bif_slave, type rw */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_rw_intr_mask; +#define REG_RD_ADDR_bif_slave_rw_intr_mask 64 +#define REG_WR_ADDR_bif_slave_rw_intr_mask 64 + +/* Register rw_ack_intr, scope bif_slave, type rw */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_rw_ack_intr; +#define REG_RD_ADDR_bif_slave_rw_ack_intr 68 +#define REG_WR_ADDR_bif_slave_rw_ack_intr 68 + +/* Register r_intr, scope bif_slave, type r */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_r_intr; +#define REG_RD_ADDR_bif_slave_r_intr 72 + +/* Register r_masked_intr, scope bif_slave, type r */ +typedef struct { + unsigned int bus_release : 1; + unsigned int bus_acquire : 1; + unsigned int dummy1 : 30; +} reg_bif_slave_r_masked_intr; +#define REG_RD_ADDR_bif_slave_r_masked_intr 76 + + +/* Constants */ +enum { + regk_bif_slave_active_hi = 0x00000003, + regk_bif_slave_active_lo = 0x00000002, + regk_bif_slave_addr = 0x00000000, + regk_bif_slave_always = 0x00000001, + regk_bif_slave_at_idle = 0x00000002, + regk_bif_slave_burst_end = 0x00000003, + regk_bif_slave_dma = 0x00000001, + regk_bif_slave_hi = 0x00000003, + regk_bif_slave_inv = 0x00000001, + regk_bif_slave_lo = 0x00000002, + regk_bif_slave_local = 0x00000001, + regk_bif_slave_master = 0x00000000, + regk_bif_slave_mode_reg = 0x00000001, + regk_bif_slave_no = 0x00000000, + regk_bif_slave_norm = 0x00000000, + regk_bif_slave_on_access = 0x00000000, + regk_bif_slave_rw_arb_cfg_default = 0x00000000, + regk_bif_slave_rw_ch0_cfg_default = 0x00000000, + regk_bif_slave_rw_ch1_cfg_default = 0x00000000, + regk_bif_slave_rw_ch2_cfg_default = 0x00000000, + regk_bif_slave_rw_ch3_cfg_default = 0x00000000, + regk_bif_slave_rw_intr_mask_default = 0x00000000, + regk_bif_slave_rw_slave_cfg_default = 0x00000000, + regk_bif_slave_shared = 0x00000000, + regk_bif_slave_slave = 0x00000001, + regk_bif_slave_t0ns = 0x00000003, + regk_bif_slave_t10ns = 0x00000002, + regk_bif_slave_t20ns = 0x00000003, + regk_bif_slave_t30ns = 0x00000002, + regk_bif_slave_t40ns = 0x00000001, + regk_bif_slave_t50ns = 0x00000000, + regk_bif_slave_yes = 0x00000001, + regk_bif_slave_z = 0x00000004 +}; +#endif /* __bif_slave_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/config_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/config_defs.h new file mode 100644 index 000000000000..abc5f20705f7 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/config_defs.h @@ -0,0 +1,142 @@ +#ifndef __config_defs_h +#define __config_defs_h + +/* + * This file is autogenerated from + * file: ../../rtl/config_regs.r + * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp + * last modfied: Thu Mar 4 12:34:39 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile config_defs.h ../../rtl/config_regs.r + * id: $Id: config_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope config */ + +/* Register r_bootsel, scope config, type r */ +typedef struct { + unsigned int boot_mode : 3; + unsigned int full_duplex : 1; + unsigned int user : 1; + unsigned int pll : 1; + unsigned int flash_bw : 1; + unsigned int dummy1 : 25; +} reg_config_r_bootsel; +#define REG_RD_ADDR_config_r_bootsel 0 + +/* Register rw_clk_ctrl, scope config, type rw */ +typedef struct { + unsigned int pll : 1; + unsigned int cpu : 1; + unsigned int iop : 1; + unsigned int dma01_eth0 : 1; + unsigned int dma23 : 1; + unsigned int dma45 : 1; + unsigned int dma67 : 1; + unsigned int dma89_strcop : 1; + unsigned int bif : 1; + unsigned int fix_io : 1; + unsigned int dummy1 : 22; +} reg_config_rw_clk_ctrl; +#define REG_RD_ADDR_config_rw_clk_ctrl 4 +#define REG_WR_ADDR_config_rw_clk_ctrl 4 + +/* Register rw_pad_ctrl, scope config, type rw */ +typedef struct { + unsigned int usb_susp : 1; + unsigned int phyrst_n : 1; + unsigned int dummy1 : 30; +} reg_config_rw_pad_ctrl; +#define REG_RD_ADDR_config_rw_pad_ctrl 8 +#define REG_WR_ADDR_config_rw_pad_ctrl 8 + + +/* Constants */ +enum { + regk_config_bw16 = 0x00000000, + regk_config_bw32 = 0x00000001, + regk_config_master = 0x00000005, + regk_config_nand = 0x00000003, + regk_config_net_rx = 0x00000001, + regk_config_net_tx_rx = 0x00000002, + regk_config_no = 0x00000000, + regk_config_none = 0x00000007, + regk_config_nor = 0x00000000, + regk_config_rw_clk_ctrl_default = 0x00000002, + regk_config_rw_pad_ctrl_default = 0x00000000, + regk_config_ser = 0x00000004, + regk_config_slave = 0x00000006, + regk_config_yes = 0x00000001 +}; +#endif /* __config_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/gio_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/gio_defs.h new file mode 100644 index 000000000000..26aa3efcf91b --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/gio_defs.h @@ -0,0 +1,295 @@ +#ifndef __gio_defs_h +#define __gio_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/gio/rtl/gio_regs.r + * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp + * last modfied: Mon Apr 11 16:07:47 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile gio_defs.h ../../inst/gio/rtl/gio_regs.r + * id: $Id: gio_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope gio */ + +/* Register rw_pa_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_dout; +#define REG_RD_ADDR_gio_rw_pa_dout 0 +#define REG_WR_ADDR_gio_rw_pa_dout 0 + +/* Register r_pa_din, scope gio, type r */ +typedef struct { + unsigned int data : 8; + unsigned int dummy1 : 24; +} reg_gio_r_pa_din; +#define REG_RD_ADDR_gio_r_pa_din 4 + +/* Register rw_pa_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 8; + unsigned int dummy1 : 24; +} reg_gio_rw_pa_oe; +#define REG_RD_ADDR_gio_rw_pa_oe 8 +#define REG_WR_ADDR_gio_rw_pa_oe 8 + +/* Register rw_intr_cfg, scope gio, type rw */ +typedef struct { + unsigned int pa0 : 3; + unsigned int pa1 : 3; + unsigned int pa2 : 3; + unsigned int pa3 : 3; + unsigned int pa4 : 3; + unsigned int pa5 : 3; + unsigned int pa6 : 3; + unsigned int pa7 : 3; + unsigned int dummy1 : 8; +} reg_gio_rw_intr_cfg; +#define REG_RD_ADDR_gio_rw_intr_cfg 12 +#define REG_WR_ADDR_gio_rw_intr_cfg 12 + +/* Register rw_intr_mask, scope gio, type rw */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int dummy1 : 24; +} reg_gio_rw_intr_mask; +#define REG_RD_ADDR_gio_rw_intr_mask 16 +#define REG_WR_ADDR_gio_rw_intr_mask 16 + +/* Register rw_ack_intr, scope gio, type rw */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int dummy1 : 24; +} reg_gio_rw_ack_intr; +#define REG_RD_ADDR_gio_rw_ack_intr 20 +#define REG_WR_ADDR_gio_rw_ack_intr 20 + +/* Register r_intr, scope gio, type r */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int dummy1 : 24; +} reg_gio_r_intr; +#define REG_RD_ADDR_gio_r_intr 24 + +/* Register r_masked_intr, scope gio, type r */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int dummy1 : 24; +} reg_gio_r_masked_intr; +#define REG_RD_ADDR_gio_r_masked_intr 28 + +/* Register rw_pb_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pb_dout; +#define REG_RD_ADDR_gio_rw_pb_dout 32 +#define REG_WR_ADDR_gio_rw_pb_dout 32 + +/* Register r_pb_din, scope gio, type r */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_r_pb_din; +#define REG_RD_ADDR_gio_r_pb_din 36 + +/* Register rw_pb_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pb_oe; +#define REG_RD_ADDR_gio_rw_pb_oe 40 +#define REG_WR_ADDR_gio_rw_pb_oe 40 + +/* Register rw_pc_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pc_dout; +#define REG_RD_ADDR_gio_rw_pc_dout 48 +#define REG_WR_ADDR_gio_rw_pc_dout 48 + +/* Register r_pc_din, scope gio, type r */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_r_pc_din; +#define REG_RD_ADDR_gio_r_pc_din 52 + +/* Register rw_pc_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pc_oe; +#define REG_RD_ADDR_gio_rw_pc_oe 56 +#define REG_WR_ADDR_gio_rw_pc_oe 56 + +/* Register rw_pd_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pd_dout; +#define REG_RD_ADDR_gio_rw_pd_dout 64 +#define REG_WR_ADDR_gio_rw_pd_dout 64 + +/* Register r_pd_din, scope gio, type r */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_r_pd_din; +#define REG_RD_ADDR_gio_r_pd_din 68 + +/* Register rw_pd_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pd_oe; +#define REG_RD_ADDR_gio_rw_pd_oe 72 +#define REG_WR_ADDR_gio_rw_pd_oe 72 + +/* Register rw_pe_dout, scope gio, type rw */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pe_dout; +#define REG_RD_ADDR_gio_rw_pe_dout 80 +#define REG_WR_ADDR_gio_rw_pe_dout 80 + +/* Register r_pe_din, scope gio, type r */ +typedef struct { + unsigned int data : 18; + unsigned int dummy1 : 14; +} reg_gio_r_pe_din; +#define REG_RD_ADDR_gio_r_pe_din 84 + +/* Register rw_pe_oe, scope gio, type rw */ +typedef struct { + unsigned int oe : 18; + unsigned int dummy1 : 14; +} reg_gio_rw_pe_oe; +#define REG_RD_ADDR_gio_rw_pe_oe 88 +#define REG_WR_ADDR_gio_rw_pe_oe 88 + + +/* Constants */ +enum { + regk_gio_anyedge = 0x00000007, + regk_gio_hi = 0x00000001, + regk_gio_lo = 0x00000002, + regk_gio_negedge = 0x00000006, + regk_gio_no = 0x00000000, + regk_gio_off = 0x00000000, + regk_gio_posedge = 0x00000005, + regk_gio_rw_intr_cfg_default = 0x00000000, + regk_gio_rw_intr_mask_default = 0x00000000, + regk_gio_rw_pa_oe_default = 0x00000000, + regk_gio_rw_pb_oe_default = 0x00000000, + regk_gio_rw_pc_oe_default = 0x00000000, + regk_gio_rw_pd_oe_default = 0x00000000, + regk_gio_rw_pe_oe_default = 0x00000000, + regk_gio_set = 0x00000003, + regk_gio_yes = 0x00000001 +}; +#endif /* __gio_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/intr_vect.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/intr_vect.h new file mode 100644 index 000000000000..bacc2a895c21 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/intr_vect.h @@ -0,0 +1,41 @@ +/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version + from ../../inst/intr_vect/rtl/guinness/ivmask.config.r +version . */ + +#ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R +#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R +#define MEMARB_INTR_VECT 0x31 +#define GEN_IO_INTR_VECT 0x32 +#define GIO_INTR_VECT GEN_IO_INTR_VECT +#define IOP0_INTR_VECT 0x33 +#define IOP1_INTR_VECT 0x34 +#define IOP2_INTR_VECT 0x35 +#define IOP3_INTR_VECT 0x36 +#define DMA0_INTR_VECT 0x37 +#define DMA1_INTR_VECT 0x38 +#define DMA2_INTR_VECT 0x39 +#define DMA3_INTR_VECT 0x3a +#define DMA4_INTR_VECT 0x3b +#define DMA5_INTR_VECT 0x3c +#define DMA6_INTR_VECT 0x3d +#define DMA7_INTR_VECT 0x3e +#define DMA8_INTR_VECT 0x3f +#define DMA9_INTR_VECT 0x40 +#define ATA_INTR_VECT 0x41 +#define SSER0_INTR_VECT 0x42 +#define SSER1_INTR_VECT 0x43 +#define SER0_INTR_VECT 0x44 +#define SER1_INTR_VECT 0x45 +#define SER2_INTR_VECT 0x46 +#define SER3_INTR_VECT 0x47 +#define P21_INTR_VECT 0x48 +#define ETH0_INTR_VECT 0x49 +#define ETH1_INTR_VECT 0x4a +#define TIMER_INTR_VECT 0x4b +#define TIMER0_INTR_VECT TIMER_INTR_VECT +#define BIF_ARB_INTR_VECT 0x4c +#define BIF_DMA_INTR_VECT 0x4d +#define EXT_INTR_VECT 0x4e +#define IPI_INTR_VECT 0x4f +#define NBR_INTR_VECT 0x50 +#endif diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/intr_vect_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/intr_vect_defs.h new file mode 100644 index 000000000000..aa65128ae1aa --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/intr_vect_defs.h @@ -0,0 +1,228 @@ +#ifndef __intr_vect_defs_h +#define __intr_vect_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/intr_vect/rtl/guinness/ivmask.config.r + * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp + * last modfied: Mon Apr 11 16:08:03 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile intr_vect_defs.h ../../inst/intr_vect/rtl/guinness/ivmask.config.r + * id: $Id: intr_vect_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope intr_vect */ + +#define STRIDE_intr_vect_rw_mask 0 +/* Register rw_mask, scope intr_vect, type rw */ +typedef struct { + unsigned int memarb : 1; + unsigned int gen_io : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int iop2 : 1; + unsigned int iop3 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int ata : 1; + unsigned int sser0 : 1; + unsigned int sser1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int p21 : 1; + unsigned int eth0 : 1; + unsigned int eth1 : 1; + unsigned int timer0 : 1; + unsigned int bif_arb : 1; + unsigned int bif_dma : 1; + unsigned int ext : 1; + unsigned int dummy1 : 2; +} reg_intr_vect_rw_mask; +#define REG_RD_ADDR_intr_vect_rw_mask 0 +#define REG_WR_ADDR_intr_vect_rw_mask 0 + +#define STRIDE_intr_vect_r_vect 0 +/* Register r_vect, scope intr_vect, type r */ +typedef struct { + unsigned int memarb : 1; + unsigned int gen_io : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int iop2 : 1; + unsigned int iop3 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int ata : 1; + unsigned int sser0 : 1; + unsigned int sser1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int p21 : 1; + unsigned int eth0 : 1; + unsigned int eth1 : 1; + unsigned int timer : 1; + unsigned int bif_arb : 1; + unsigned int bif_dma : 1; + unsigned int ext : 1; + unsigned int dummy1 : 2; +} reg_intr_vect_r_vect; +#define REG_RD_ADDR_intr_vect_r_vect 4 + +#define STRIDE_intr_vect_r_masked_vect 0 +/* Register r_masked_vect, scope intr_vect, type r */ +typedef struct { + unsigned int memarb : 1; + unsigned int gen_io : 1; + unsigned int iop0 : 1; + unsigned int iop1 : 1; + unsigned int iop2 : 1; + unsigned int iop3 : 1; + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int ata : 1; + unsigned int sser0 : 1; + unsigned int sser1 : 1; + unsigned int ser0 : 1; + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int p21 : 1; + unsigned int eth0 : 1; + unsigned int eth1 : 1; + unsigned int timer : 1; + unsigned int bif_arb : 1; + unsigned int bif_dma : 1; + unsigned int ext : 1; + unsigned int dummy1 : 2; +} reg_intr_vect_r_masked_vect; +#define REG_RD_ADDR_intr_vect_r_masked_vect 8 + +/* Register r_nmi, scope intr_vect, type r */ +typedef struct { + unsigned int ext : 1; + unsigned int watchdog : 1; + unsigned int dummy1 : 30; +} reg_intr_vect_r_nmi; +#define REG_RD_ADDR_intr_vect_r_nmi 12 + +/* Register r_guru, scope intr_vect, type r */ +typedef struct { + unsigned int jtag : 1; + unsigned int dummy1 : 31; +} reg_intr_vect_r_guru; +#define REG_RD_ADDR_intr_vect_r_guru 16 + +/* Register rw_ipi, scope intr_vect, type rw */ +typedef struct +{ + unsigned int vector; +} reg_intr_vect_rw_ipi; +#define REG_RD_ADDR_intr_vect_rw_ipi 20 +#define REG_WR_ADDR_intr_vect_rw_ipi 20 + +/* Constants */ +enum { + regk_intr_vect_off = 0x00000000, + regk_intr_vect_on = 0x00000001, + regk_intr_vect_rw_mask_default = 0x00000000 +}; +#endif /* __intr_vect_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/marb_bp_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/marb_bp_defs.h new file mode 100644 index 000000000000..dcaaec4620ba --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/marb_bp_defs.h @@ -0,0 +1,205 @@ +#ifndef __marb_bp_defs_h +#define __marb_bp_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: + * last modfied: Fri Nov 7 15:36:04 2003 + * + * by /n/asic/projects/guinness/design/top/inst/rdesc/rdes2c ../../rtl/global.rmap ../../mod/modreg.rmap -base 0xb0000000 ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_bp_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +/* C-code for register scope marb_bp */ + +/* Register rw_first_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_first_addr; +#define REG_RD_ADDR_marb_bp_rw_first_addr 0 +#define REG_WR_ADDR_marb_bp_rw_first_addr 0 + +/* Register rw_last_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_last_addr; +#define REG_RD_ADDR_marb_bp_rw_last_addr 4 +#define REG_WR_ADDR_marb_bp_rw_last_addr 4 + +/* Register rw_op, scope marb_bp, type rw */ +typedef struct { + unsigned int read : 1; + unsigned int write : 1; + unsigned int read_excl : 1; + unsigned int pri_write : 1; + unsigned int us_read : 1; + unsigned int us_write : 1; + unsigned int us_read_excl : 1; + unsigned int us_pri_write : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_rw_op; +#define REG_RD_ADDR_marb_bp_rw_op 8 +#define REG_WR_ADDR_marb_bp_rw_op 8 + +/* Register rw_clients, scope marb_bp, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_rw_clients; +#define REG_RD_ADDR_marb_bp_rw_clients 12 +#define REG_WR_ADDR_marb_bp_rw_clients 12 + +/* Register rw_options, scope marb_bp, type rw */ +typedef struct { + unsigned int wrap : 1; + unsigned int dummy1 : 31; +} reg_marb_bp_rw_options; +#define REG_RD_ADDR_marb_bp_rw_options 16 +#define REG_WR_ADDR_marb_bp_rw_options 16 + +/* Register r_break_addr, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_break_addr; +#define REG_RD_ADDR_marb_bp_r_break_addr 20 + +/* Register r_break_op, scope marb_bp, type r */ +typedef struct { + unsigned int read : 1; + unsigned int write : 1; + unsigned int read_excl : 1; + unsigned int pri_write : 1; + unsigned int us_read : 1; + unsigned int us_write : 1; + unsigned int us_read_excl : 1; + unsigned int us_pri_write : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_r_break_op; +#define REG_RD_ADDR_marb_bp_r_break_op 24 + +/* Register r_break_clients, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_break_clients; +#define REG_RD_ADDR_marb_bp_r_break_clients 28 + +/* Register r_break_first_client, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_break_first_client; +#define REG_RD_ADDR_marb_bp_r_break_first_client 32 + +/* Register r_break_size, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_break_size; +#define REG_RD_ADDR_marb_bp_r_break_size 36 + +/* Register rw_ack, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_ack; +#define REG_RD_ADDR_marb_bp_rw_ack 40 +#define REG_WR_ADDR_marb_bp_rw_ack 40 + + +/* Constants */ +enum { + regk_marb_bp_no = 0x00000000, + regk_marb_bp_rw_op_default = 0x00000000, + regk_marb_bp_rw_options_default = 0x00000000, + regk_marb_bp_yes = 0x00000001 +}; +#endif /* __marb_bp_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/marb_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/marb_defs.h new file mode 100644 index 000000000000..254da0854986 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/marb_defs.h @@ -0,0 +1,475 @@ +#ifndef __marb_defs_h +#define __marb_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: + * last modfied: Mon Apr 11 16:12:16 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb */ + +#define STRIDE_marb_rw_int_slots 4 +/* Register rw_int_slots, scope marb, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_rw_int_slots; +#define REG_RD_ADDR_marb_rw_int_slots 0 +#define REG_WR_ADDR_marb_rw_int_slots 0 + +#define STRIDE_marb_rw_ext_slots 4 +/* Register rw_ext_slots, scope marb, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_rw_ext_slots; +#define REG_RD_ADDR_marb_rw_ext_slots 256 +#define REG_WR_ADDR_marb_rw_ext_slots 256 + +#define STRIDE_marb_rw_regs_slots 4 +/* Register rw_regs_slots, scope marb, type rw */ +typedef struct { + unsigned int owner : 4; + unsigned int dummy1 : 28; +} reg_marb_rw_regs_slots; +#define REG_RD_ADDR_marb_rw_regs_slots 512 +#define REG_WR_ADDR_marb_rw_regs_slots 512 + +/* Register rw_intr_mask, scope marb, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_rw_intr_mask; +#define REG_RD_ADDR_marb_rw_intr_mask 528 +#define REG_WR_ADDR_marb_rw_intr_mask 528 + +/* Register rw_ack_intr, scope marb, type rw */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_rw_ack_intr; +#define REG_RD_ADDR_marb_rw_ack_intr 532 +#define REG_WR_ADDR_marb_rw_ack_intr 532 + +/* Register r_intr, scope marb, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_r_intr; +#define REG_RD_ADDR_marb_r_intr 536 + +/* Register r_masked_intr, scope marb, type r */ +typedef struct { + unsigned int bp0 : 1; + unsigned int bp1 : 1; + unsigned int bp2 : 1; + unsigned int bp3 : 1; + unsigned int dummy1 : 28; +} reg_marb_r_masked_intr; +#define REG_RD_ADDR_marb_r_masked_intr 540 + +/* Register rw_stop_mask, scope marb, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_rw_stop_mask; +#define REG_RD_ADDR_marb_rw_stop_mask 544 +#define REG_WR_ADDR_marb_rw_stop_mask 544 + +/* Register r_stopped, scope marb, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_r_stopped; +#define REG_RD_ADDR_marb_r_stopped 548 + +/* Register rw_no_snoop, scope marb, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_rw_no_snoop; +#define REG_RD_ADDR_marb_rw_no_snoop 832 +#define REG_WR_ADDR_marb_rw_no_snoop 832 + +/* Register rw_no_snoop_rq, scope marb, type rw */ +typedef struct { + unsigned int dummy1 : 10; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int dummy2 : 20; +} reg_marb_rw_no_snoop_rq; +#define REG_RD_ADDR_marb_rw_no_snoop_rq 836 +#define REG_WR_ADDR_marb_rw_no_snoop_rq 836 + + +/* Constants */ +enum { + regk_marb_cpud = 0x0000000b, + regk_marb_cpui = 0x0000000a, + regk_marb_dma0 = 0x00000000, + regk_marb_dma1 = 0x00000001, + regk_marb_dma2 = 0x00000002, + regk_marb_dma3 = 0x00000003, + regk_marb_dma4 = 0x00000004, + regk_marb_dma5 = 0x00000005, + regk_marb_dma6 = 0x00000006, + regk_marb_dma7 = 0x00000007, + regk_marb_dma8 = 0x00000008, + regk_marb_dma9 = 0x00000009, + regk_marb_iop = 0x0000000c, + regk_marb_no = 0x00000000, + regk_marb_r_stopped_default = 0x00000000, + regk_marb_rw_ext_slots_default = 0x00000000, + regk_marb_rw_ext_slots_size = 0x00000040, + regk_marb_rw_int_slots_default = 0x00000000, + regk_marb_rw_int_slots_size = 0x00000040, + regk_marb_rw_intr_mask_default = 0x00000000, + regk_marb_rw_no_snoop_default = 0x00000000, + regk_marb_rw_no_snoop_rq_default = 0x00000000, + regk_marb_rw_regs_slots_default = 0x00000000, + regk_marb_rw_regs_slots_size = 0x00000004, + regk_marb_rw_stop_mask_default = 0x00000000, + regk_marb_slave = 0x0000000d, + regk_marb_yes = 0x00000001 +}; +#endif /* __marb_defs_h */ +#ifndef __marb_bp_defs_h +#define __marb_bp_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: + * last modfied: Mon Apr 11 16:12:16 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope marb_bp */ + +/* Register rw_first_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_first_addr; +#define REG_RD_ADDR_marb_bp_rw_first_addr 0 +#define REG_WR_ADDR_marb_bp_rw_first_addr 0 + +/* Register rw_last_addr, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_last_addr; +#define REG_RD_ADDR_marb_bp_rw_last_addr 4 +#define REG_WR_ADDR_marb_bp_rw_last_addr 4 + +/* Register rw_op, scope marb_bp, type rw */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_rw_op; +#define REG_RD_ADDR_marb_bp_rw_op 8 +#define REG_WR_ADDR_marb_bp_rw_op 8 + +/* Register rw_clients, scope marb_bp, type rw */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_rw_clients; +#define REG_RD_ADDR_marb_bp_rw_clients 12 +#define REG_WR_ADDR_marb_bp_rw_clients 12 + +/* Register rw_options, scope marb_bp, type rw */ +typedef struct { + unsigned int wrap : 1; + unsigned int dummy1 : 31; +} reg_marb_bp_rw_options; +#define REG_RD_ADDR_marb_bp_rw_options 16 +#define REG_WR_ADDR_marb_bp_rw_options 16 + +/* Register r_brk_addr, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_brk_addr; +#define REG_RD_ADDR_marb_bp_r_brk_addr 20 + +/* Register r_brk_op, scope marb_bp, type r */ +typedef struct { + unsigned int rd : 1; + unsigned int wr : 1; + unsigned int rd_excl : 1; + unsigned int pri_wr : 1; + unsigned int us_rd : 1; + unsigned int us_wr : 1; + unsigned int us_rd_excl : 1; + unsigned int us_pri_wr : 1; + unsigned int dummy1 : 24; +} reg_marb_bp_r_brk_op; +#define REG_RD_ADDR_marb_bp_r_brk_op 24 + +/* Register r_brk_clients, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_brk_clients; +#define REG_RD_ADDR_marb_bp_r_brk_clients 28 + +/* Register r_brk_first_client, scope marb_bp, type r */ +typedef struct { + unsigned int dma0 : 1; + unsigned int dma1 : 1; + unsigned int dma2 : 1; + unsigned int dma3 : 1; + unsigned int dma4 : 1; + unsigned int dma5 : 1; + unsigned int dma6 : 1; + unsigned int dma7 : 1; + unsigned int dma8 : 1; + unsigned int dma9 : 1; + unsigned int cpui : 1; + unsigned int cpud : 1; + unsigned int iop : 1; + unsigned int slave : 1; + unsigned int dummy1 : 18; +} reg_marb_bp_r_brk_first_client; +#define REG_RD_ADDR_marb_bp_r_brk_first_client 32 + +/* Register r_brk_size, scope marb_bp, type r */ +typedef unsigned int reg_marb_bp_r_brk_size; +#define REG_RD_ADDR_marb_bp_r_brk_size 36 + +/* Register rw_ack, scope marb_bp, type rw */ +typedef unsigned int reg_marb_bp_rw_ack; +#define REG_RD_ADDR_marb_bp_rw_ack 40 +#define REG_WR_ADDR_marb_bp_rw_ack 40 + + +/* Constants */ +enum { + regk_marb_bp_no = 0x00000000, + regk_marb_bp_rw_op_default = 0x00000000, + regk_marb_bp_rw_options_default = 0x00000000, + regk_marb_bp_yes = 0x00000001 +}; +#endif /* __marb_bp_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/pinmux_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/pinmux_defs.h new file mode 100644 index 000000000000..751eab5f191c --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/pinmux_defs.h @@ -0,0 +1,357 @@ +#ifndef __pinmux_defs_h +#define __pinmux_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r + * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp + * last modfied: Mon Apr 11 16:09:11 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile pinmux_defs.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r + * id: $Id: pinmux_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope pinmux */ + +/* Register rw_pa, scope pinmux, type rw */ +typedef struct { + unsigned int pa0 : 1; + unsigned int pa1 : 1; + unsigned int pa2 : 1; + unsigned int pa3 : 1; + unsigned int pa4 : 1; + unsigned int pa5 : 1; + unsigned int pa6 : 1; + unsigned int pa7 : 1; + unsigned int csp2_n : 1; + unsigned int csp3_n : 1; + unsigned int csp5_n : 1; + unsigned int csp6_n : 1; + unsigned int hsh4 : 1; + unsigned int hsh5 : 1; + unsigned int hsh6 : 1; + unsigned int hsh7 : 1; + unsigned int dummy1 : 16; +} reg_pinmux_rw_pa; +#define REG_RD_ADDR_pinmux_rw_pa 0 +#define REG_WR_ADDR_pinmux_rw_pa 0 + +/* Register rw_hwprot, scope pinmux, type rw */ +typedef struct { + unsigned int ser1 : 1; + unsigned int ser2 : 1; + unsigned int ser3 : 1; + unsigned int sser0 : 1; + unsigned int sser1 : 1; + unsigned int ata0 : 1; + unsigned int ata1 : 1; + unsigned int ata2 : 1; + unsigned int ata3 : 1; + unsigned int ata : 1; + unsigned int eth1 : 1; + unsigned int eth1_mgm : 1; + unsigned int timer : 1; + unsigned int p21 : 1; + unsigned int dummy1 : 18; +} reg_pinmux_rw_hwprot; +#define REG_RD_ADDR_pinmux_rw_hwprot 4 +#define REG_WR_ADDR_pinmux_rw_hwprot 4 + +/* Register rw_pb_gio, scope pinmux, type rw */ +typedef struct { + unsigned int pb0 : 1; + unsigned int pb1 : 1; + unsigned int pb2 : 1; + unsigned int pb3 : 1; + unsigned int pb4 : 1; + unsigned int pb5 : 1; + unsigned int pb6 : 1; + unsigned int pb7 : 1; + unsigned int pb8 : 1; + unsigned int pb9 : 1; + unsigned int pb10 : 1; + unsigned int pb11 : 1; + unsigned int pb12 : 1; + unsigned int pb13 : 1; + unsigned int pb14 : 1; + unsigned int pb15 : 1; + unsigned int pb16 : 1; + unsigned int pb17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pb_gio; +#define REG_RD_ADDR_pinmux_rw_pb_gio 8 +#define REG_WR_ADDR_pinmux_rw_pb_gio 8 + +/* Register rw_pb_iop, scope pinmux, type rw */ +typedef struct { + unsigned int pb0 : 1; + unsigned int pb1 : 1; + unsigned int pb2 : 1; + unsigned int pb3 : 1; + unsigned int pb4 : 1; + unsigned int pb5 : 1; + unsigned int pb6 : 1; + unsigned int pb7 : 1; + unsigned int pb8 : 1; + unsigned int pb9 : 1; + unsigned int pb10 : 1; + unsigned int pb11 : 1; + unsigned int pb12 : 1; + unsigned int pb13 : 1; + unsigned int pb14 : 1; + unsigned int pb15 : 1; + unsigned int pb16 : 1; + unsigned int pb17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pb_iop; +#define REG_RD_ADDR_pinmux_rw_pb_iop 12 +#define REG_WR_ADDR_pinmux_rw_pb_iop 12 + +/* Register rw_pc_gio, scope pinmux, type rw */ +typedef struct { + unsigned int pc0 : 1; + unsigned int pc1 : 1; + unsigned int pc2 : 1; + unsigned int pc3 : 1; + unsigned int pc4 : 1; + unsigned int pc5 : 1; + unsigned int pc6 : 1; + unsigned int pc7 : 1; + unsigned int pc8 : 1; + unsigned int pc9 : 1; + unsigned int pc10 : 1; + unsigned int pc11 : 1; + unsigned int pc12 : 1; + unsigned int pc13 : 1; + unsigned int pc14 : 1; + unsigned int pc15 : 1; + unsigned int pc16 : 1; + unsigned int pc17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pc_gio; +#define REG_RD_ADDR_pinmux_rw_pc_gio 16 +#define REG_WR_ADDR_pinmux_rw_pc_gio 16 + +/* Register rw_pc_iop, scope pinmux, type rw */ +typedef struct { + unsigned int pc0 : 1; + unsigned int pc1 : 1; + unsigned int pc2 : 1; + unsigned int pc3 : 1; + unsigned int pc4 : 1; + unsigned int pc5 : 1; + unsigned int pc6 : 1; + unsigned int pc7 : 1; + unsigned int pc8 : 1; + unsigned int pc9 : 1; + unsigned int pc10 : 1; + unsigned int pc11 : 1; + unsigned int pc12 : 1; + unsigned int pc13 : 1; + unsigned int pc14 : 1; + unsigned int pc15 : 1; + unsigned int pc16 : 1; + unsigned int pc17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pc_iop; +#define REG_RD_ADDR_pinmux_rw_pc_iop 20 +#define REG_WR_ADDR_pinmux_rw_pc_iop 20 + +/* Register rw_pd_gio, scope pinmux, type rw */ +typedef struct { + unsigned int pd0 : 1; + unsigned int pd1 : 1; + unsigned int pd2 : 1; + unsigned int pd3 : 1; + unsigned int pd4 : 1; + unsigned int pd5 : 1; + unsigned int pd6 : 1; + unsigned int pd7 : 1; + unsigned int pd8 : 1; + unsigned int pd9 : 1; + unsigned int pd10 : 1; + unsigned int pd11 : 1; + unsigned int pd12 : 1; + unsigned int pd13 : 1; + unsigned int pd14 : 1; + unsigned int pd15 : 1; + unsigned int pd16 : 1; + unsigned int pd17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pd_gio; +#define REG_RD_ADDR_pinmux_rw_pd_gio 24 +#define REG_WR_ADDR_pinmux_rw_pd_gio 24 + +/* Register rw_pd_iop, scope pinmux, type rw */ +typedef struct { + unsigned int pd0 : 1; + unsigned int pd1 : 1; + unsigned int pd2 : 1; + unsigned int pd3 : 1; + unsigned int pd4 : 1; + unsigned int pd5 : 1; + unsigned int pd6 : 1; + unsigned int pd7 : 1; + unsigned int pd8 : 1; + unsigned int pd9 : 1; + unsigned int pd10 : 1; + unsigned int pd11 : 1; + unsigned int pd12 : 1; + unsigned int pd13 : 1; + unsigned int pd14 : 1; + unsigned int pd15 : 1; + unsigned int pd16 : 1; + unsigned int pd17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pd_iop; +#define REG_RD_ADDR_pinmux_rw_pd_iop 28 +#define REG_WR_ADDR_pinmux_rw_pd_iop 28 + +/* Register rw_pe_gio, scope pinmux, type rw */ +typedef struct { + unsigned int pe0 : 1; + unsigned int pe1 : 1; + unsigned int pe2 : 1; + unsigned int pe3 : 1; + unsigned int pe4 : 1; + unsigned int pe5 : 1; + unsigned int pe6 : 1; + unsigned int pe7 : 1; + unsigned int pe8 : 1; + unsigned int pe9 : 1; + unsigned int pe10 : 1; + unsigned int pe11 : 1; + unsigned int pe12 : 1; + unsigned int pe13 : 1; + unsigned int pe14 : 1; + unsigned int pe15 : 1; + unsigned int pe16 : 1; + unsigned int pe17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pe_gio; +#define REG_RD_ADDR_pinmux_rw_pe_gio 32 +#define REG_WR_ADDR_pinmux_rw_pe_gio 32 + +/* Register rw_pe_iop, scope pinmux, type rw */ +typedef struct { + unsigned int pe0 : 1; + unsigned int pe1 : 1; + unsigned int pe2 : 1; + unsigned int pe3 : 1; + unsigned int pe4 : 1; + unsigned int pe5 : 1; + unsigned int pe6 : 1; + unsigned int pe7 : 1; + unsigned int pe8 : 1; + unsigned int pe9 : 1; + unsigned int pe10 : 1; + unsigned int pe11 : 1; + unsigned int pe12 : 1; + unsigned int pe13 : 1; + unsigned int pe14 : 1; + unsigned int pe15 : 1; + unsigned int pe16 : 1; + unsigned int pe17 : 1; + unsigned int dummy1 : 14; +} reg_pinmux_rw_pe_iop; +#define REG_RD_ADDR_pinmux_rw_pe_iop 36 +#define REG_WR_ADDR_pinmux_rw_pe_iop 36 + +/* Register rw_usb_phy, scope pinmux, type rw */ +typedef struct { + unsigned int en_usb0 : 1; + unsigned int en_usb1 : 1; + unsigned int dummy1 : 30; +} reg_pinmux_rw_usb_phy; +#define REG_RD_ADDR_pinmux_rw_usb_phy 40 +#define REG_WR_ADDR_pinmux_rw_usb_phy 40 + + +/* Constants */ +enum { + regk_pinmux_no = 0x00000000, + regk_pinmux_rw_hwprot_default = 0x00000000, + regk_pinmux_rw_pa_default = 0x00000000, + regk_pinmux_rw_pb_gio_default = 0x00000000, + regk_pinmux_rw_pb_iop_default = 0x00000000, + regk_pinmux_rw_pc_gio_default = 0x00000000, + regk_pinmux_rw_pc_iop_default = 0x00000000, + regk_pinmux_rw_pd_gio_default = 0x00000000, + regk_pinmux_rw_pd_iop_default = 0x00000000, + regk_pinmux_rw_pe_gio_default = 0x00000000, + regk_pinmux_rw_pe_iop_default = 0x00000000, + regk_pinmux_rw_usb_phy_default = 0x00000000, + regk_pinmux_yes = 0x00000001 +}; +#endif /* __pinmux_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/reg_map.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/reg_map.h new file mode 100644 index 000000000000..4146973a58b3 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/reg_map.h @@ -0,0 +1,104 @@ +#ifndef __reg_map_h +#define __reg_map_h + +/* + * This file is autogenerated from + * file: ../../mod/fakereg.rmap + * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp + * last modified: Wed Feb 11 20:53:25 2004 + * file: ../../rtl/global.rmap + * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp + * last modified: Mon Aug 18 17:08:23 2003 + * file: ../../mod/modreg.rmap + * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp + * last modified: Fri Feb 20 16:40:04 2004 + * + * by /n/asic/design/tools/rdesc/src/rdes2c -map -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/io_proc/rtl/guinness/iop_top.r ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap + * id: $Id: reg_map.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +typedef enum { + regi_ata = 0xb0032000, + regi_bif_core = 0xb0014000, + regi_bif_dma = 0xb0016000, + regi_bif_slave = 0xb0018000, + regi_config = 0xb003c000, + regi_dma0 = 0xb0000000, + regi_dma1 = 0xb0002000, + regi_dma2 = 0xb0004000, + regi_dma3 = 0xb0006000, + regi_dma4 = 0xb0008000, + regi_dma5 = 0xb000a000, + regi_dma6 = 0xb000c000, + regi_dma7 = 0xb000e000, + regi_dma8 = 0xb0010000, + regi_dma9 = 0xb0012000, + regi_eth0 = 0xb0034000, + regi_eth1 = 0xb0036000, + regi_gio = 0xb001a000, + regi_iop = 0xb0020000, + regi_iop_version = 0xb0020000, + regi_iop_fifo_in0_extra = 0xb0020040, + regi_iop_fifo_in1_extra = 0xb0020080, + regi_iop_fifo_out0_extra = 0xb00200c0, + regi_iop_fifo_out1_extra = 0xb0020100, + regi_iop_trigger_grp0 = 0xb0020140, + regi_iop_trigger_grp1 = 0xb0020180, + regi_iop_trigger_grp2 = 0xb00201c0, + regi_iop_trigger_grp3 = 0xb0020200, + regi_iop_trigger_grp4 = 0xb0020240, + regi_iop_trigger_grp5 = 0xb0020280, + regi_iop_trigger_grp6 = 0xb00202c0, + regi_iop_trigger_grp7 = 0xb0020300, + regi_iop_crc_par0 = 0xb0020380, + regi_iop_crc_par1 = 0xb0020400, + regi_iop_dmc_in0 = 0xb0020480, + regi_iop_dmc_in1 = 0xb0020500, + regi_iop_dmc_out0 = 0xb0020580, + regi_iop_dmc_out1 = 0xb0020600, + regi_iop_fifo_in0 = 0xb0020680, + regi_iop_fifo_in1 = 0xb0020700, + regi_iop_fifo_out0 = 0xb0020780, + regi_iop_fifo_out1 = 0xb0020800, + regi_iop_scrc_in0 = 0xb0020880, + regi_iop_scrc_in1 = 0xb0020900, + regi_iop_scrc_out0 = 0xb0020980, + regi_iop_scrc_out1 = 0xb0020a00, + regi_iop_timer_grp0 = 0xb0020a80, + regi_iop_timer_grp1 = 0xb0020b00, + regi_iop_timer_grp2 = 0xb0020b80, + regi_iop_timer_grp3 = 0xb0020c00, + regi_iop_sap_in = 0xb0020d00, + regi_iop_sap_out = 0xb0020e00, + regi_iop_spu0 = 0xb0020f00, + regi_iop_spu1 = 0xb0021000, + regi_iop_sw_cfg = 0xb0021100, + regi_iop_sw_cpu = 0xb0021200, + regi_iop_sw_mpu = 0xb0021300, + regi_iop_sw_spu0 = 0xb0021400, + regi_iop_sw_spu1 = 0xb0021500, + regi_iop_mpu = 0xb0021600, + regi_irq = 0xb001c000, + regi_irq2 = 0xb005c000, + regi_marb = 0xb003e000, + regi_marb_bp0 = 0xb003e240, + regi_marb_bp1 = 0xb003e280, + regi_marb_bp2 = 0xb003e2c0, + regi_marb_bp3 = 0xb003e300, + regi_pinmux = 0xb0038000, + regi_ser0 = 0xb0026000, + regi_ser1 = 0xb0028000, + regi_ser2 = 0xb002a000, + regi_ser3 = 0xb002c000, + regi_sser0 = 0xb0022000, + regi_sser1 = 0xb0024000, + regi_strcop = 0xb0030000, + regi_strmux = 0xb003a000, + regi_timer = 0xb001e000, + regi_timer0 = 0xb001e000, + regi_timer2 = 0xb005e000, + regi_trace = 0xb0040000, +} reg_scope_instances; +#endif /* __reg_map_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/strmux_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/strmux_defs.h new file mode 100644 index 000000000000..cbfaa867829e --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/strmux_defs.h @@ -0,0 +1,127 @@ +#ifndef __strmux_defs_h +#define __strmux_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/strmux/rtl/guinness/strmux_regs.r + * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp + * last modfied: Mon Apr 11 16:09:43 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strmux_defs.h ../../inst/strmux/rtl/guinness/strmux_regs.r + * id: $Id: strmux_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope strmux */ + +/* Register rw_cfg, scope strmux, type rw */ +typedef struct { + unsigned int dma0 : 3; + unsigned int dma1 : 3; + unsigned int dma2 : 3; + unsigned int dma3 : 3; + unsigned int dma4 : 3; + unsigned int dma5 : 3; + unsigned int dma6 : 3; + unsigned int dma7 : 3; + unsigned int dma8 : 3; + unsigned int dma9 : 3; + unsigned int dummy1 : 2; +} reg_strmux_rw_cfg; +#define REG_RD_ADDR_strmux_rw_cfg 0 +#define REG_WR_ADDR_strmux_rw_cfg 0 + + +/* Constants */ +enum { + regk_strmux_ata = 0x00000003, + regk_strmux_eth0 = 0x00000001, + regk_strmux_eth1 = 0x00000004, + regk_strmux_ext0 = 0x00000001, + regk_strmux_ext1 = 0x00000001, + regk_strmux_ext2 = 0x00000001, + regk_strmux_ext3 = 0x00000001, + regk_strmux_iop0 = 0x00000002, + regk_strmux_iop1 = 0x00000001, + regk_strmux_off = 0x00000000, + regk_strmux_p21 = 0x00000004, + regk_strmux_rw_cfg_default = 0x00000000, + regk_strmux_ser0 = 0x00000002, + regk_strmux_ser1 = 0x00000002, + regk_strmux_ser2 = 0x00000004, + regk_strmux_ser3 = 0x00000003, + regk_strmux_sser0 = 0x00000003, + regk_strmux_sser1 = 0x00000003, + regk_strmux_strcop = 0x00000002 +}; +#endif /* __strmux_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/hwregs/timer_defs.h b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/timer_defs.h new file mode 100644 index 000000000000..76bcc591921d --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/hwregs/timer_defs.h @@ -0,0 +1,266 @@ +#ifndef __timer_defs_h +#define __timer_defs_h + +/* + * This file is autogenerated from + * file: ../../inst/timer/rtl/timer_regs.r + * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp + * last modfied: Mon Apr 11 16:09:53 2005 + * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile timer_defs.h ../../inst/timer/rtl/timer_regs.r + * id: $Id: timer_defs.h,v 1.1 2007/04/11 13:51:01 ricardw Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- + */ +/* Main access macros */ +#ifndef REG_RD +#define REG_RD( scope, inst, reg ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR +#define REG_WR( scope, inst, reg, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_VECT +#define REG_RD_VECT( scope, inst, reg, index ) \ + REG_READ( reg_##scope##_##reg, \ + (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_VECT +#define REG_WR_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( reg_##scope##_##reg, \ + (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT +#define REG_RD_INT( scope, inst, reg ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT +#define REG_WR_INT( scope, inst, reg, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) +#endif + +#ifndef REG_RD_INT_VECT +#define REG_RD_INT_VECT( scope, inst, reg, index ) \ + REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +#ifndef REG_WR_INT_VECT +#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ + REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg, (val) ) +#endif + +#ifndef REG_TYPE_CONV +#define REG_TYPE_CONV( type, orgtype, val ) \ + ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) +#endif + +#ifndef reg_page_size +#define reg_page_size 8192 +#endif + +#ifndef REG_ADDR +#define REG_ADDR( scope, inst, reg ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg ) +#endif + +#ifndef REG_ADDR_VECT +#define REG_ADDR_VECT( scope, inst, reg, index ) \ + ( (inst) + REG_RD_ADDR_##scope##_##reg + \ + (index) * STRIDE_##scope##_##reg ) +#endif + +/* C-code for register scope timer */ + +/* Register rw_tmr0_div, scope timer, type rw */ +typedef unsigned int reg_timer_rw_tmr0_div; +#define REG_RD_ADDR_timer_rw_tmr0_div 0 +#define REG_WR_ADDR_timer_rw_tmr0_div 0 + +/* Register r_tmr0_data, scope timer, type r */ +typedef unsigned int reg_timer_r_tmr0_data; +#define REG_RD_ADDR_timer_r_tmr0_data 4 + +/* Register rw_tmr0_ctrl, scope timer, type rw */ +typedef struct { + unsigned int op : 2; + unsigned int freq : 3; + unsigned int dummy1 : 27; +} reg_timer_rw_tmr0_ctrl; +#define REG_RD_ADDR_timer_rw_tmr0_ctrl 8 +#define REG_WR_ADDR_timer_rw_tmr0_ctrl 8 + +/* Register rw_tmr1_div, scope timer, type rw */ +typedef unsigned int reg_timer_rw_tmr1_div; +#define REG_RD_ADDR_timer_rw_tmr1_div 16 +#define REG_WR_ADDR_timer_rw_tmr1_div 16 + +/* Register r_tmr1_data, scope timer, type r */ +typedef unsigned int reg_timer_r_tmr1_data; +#define REG_RD_ADDR_timer_r_tmr1_data 20 + +/* Register rw_tmr1_ctrl, scope timer, type rw */ +typedef struct { + unsigned int op : 2; + unsigned int freq : 3; + unsigned int dummy1 : 27; +} reg_timer_rw_tmr1_ctrl; +#define REG_RD_ADDR_timer_rw_tmr1_ctrl 24 +#define REG_WR_ADDR_timer_rw_tmr1_ctrl 24 + +/* Register rs_cnt_data, scope timer, type rs */ +typedef struct { + unsigned int tmr : 24; + unsigned int cnt : 8; +} reg_timer_rs_cnt_data; +#define REG_RD_ADDR_timer_rs_cnt_data 32 + +/* Register r_cnt_data, scope timer, type r */ +typedef struct { + unsigned int tmr : 24; + unsigned int cnt : 8; +} reg_timer_r_cnt_data; +#define REG_RD_ADDR_timer_r_cnt_data 36 + +/* Register rw_cnt_cfg, scope timer, type rw */ +typedef struct { + unsigned int clk : 2; + unsigned int dummy1 : 30; +} reg_timer_rw_cnt_cfg; +#define REG_RD_ADDR_timer_rw_cnt_cfg 40 +#define REG_WR_ADDR_timer_rw_cnt_cfg 40 + +/* Register rw_trig, scope timer, type rw */ +typedef unsigned int reg_timer_rw_trig; +#define REG_RD_ADDR_timer_rw_trig 48 +#define REG_WR_ADDR_timer_rw_trig 48 + +/* Register rw_trig_cfg, scope timer, type rw */ +typedef struct { + unsigned int tmr : 2; + unsigned int dummy1 : 30; +} reg_timer_rw_trig_cfg; +#define REG_RD_ADDR_timer_rw_trig_cfg 52 +#define REG_WR_ADDR_timer_rw_trig_cfg 52 + +/* Register r_time, scope timer, type r */ +typedef unsigned int reg_timer_r_time; +#define REG_RD_ADDR_timer_r_time 56 + +/* Register rw_out, scope timer, type rw */ +typedef struct { + unsigned int tmr : 2; + unsigned int dummy1 : 30; +} reg_timer_rw_out; +#define REG_RD_ADDR_timer_rw_out 60 +#define REG_WR_ADDR_timer_rw_out 60 + +/* Register rw_wd_ctrl, scope timer, type rw */ +typedef struct { + unsigned int cnt : 8; + unsigned int cmd : 1; + unsigned int key : 7; + unsigned int dummy1 : 16; +} reg_timer_rw_wd_ctrl; +#define REG_RD_ADDR_timer_rw_wd_ctrl 64 +#define REG_WR_ADDR_timer_rw_wd_ctrl 64 + +/* Register r_wd_stat, scope timer, type r */ +typedef struct { + unsigned int cnt : 8; + unsigned int cmd : 1; + unsigned int dummy1 : 23; +} reg_timer_r_wd_stat; +#define REG_RD_ADDR_timer_r_wd_stat 68 + +/* Register rw_intr_mask, scope timer, type rw */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_rw_intr_mask; +#define REG_RD_ADDR_timer_rw_intr_mask 72 +#define REG_WR_ADDR_timer_rw_intr_mask 72 + +/* Register rw_ack_intr, scope timer, type rw */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_rw_ack_intr; +#define REG_RD_ADDR_timer_rw_ack_intr 76 +#define REG_WR_ADDR_timer_rw_ack_intr 76 + +/* Register r_intr, scope timer, type r */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_r_intr; +#define REG_RD_ADDR_timer_r_intr 80 + +/* Register r_masked_intr, scope timer, type r */ +typedef struct { + unsigned int tmr0 : 1; + unsigned int tmr1 : 1; + unsigned int cnt : 1; + unsigned int trig : 1; + unsigned int dummy1 : 28; +} reg_timer_r_masked_intr; +#define REG_RD_ADDR_timer_r_masked_intr 84 + +/* Register rw_test, scope timer, type rw */ +typedef struct { + unsigned int dis : 1; + unsigned int en : 1; + unsigned int dummy1 : 30; +} reg_timer_rw_test; +#define REG_RD_ADDR_timer_rw_test 88 +#define REG_WR_ADDR_timer_rw_test 88 + + +/* Constants */ +enum { + regk_timer_ext = 0x00000001, + regk_timer_f100 = 0x00000007, + regk_timer_f29_493 = 0x00000004, + regk_timer_f32 = 0x00000005, + regk_timer_f32_768 = 0x00000006, + regk_timer_hold = 0x00000001, + regk_timer_ld = 0x00000000, + regk_timer_no = 0x00000000, + regk_timer_off = 0x00000000, + regk_timer_run = 0x00000002, + regk_timer_rw_cnt_cfg_default = 0x00000000, + regk_timer_rw_intr_mask_default = 0x00000000, + regk_timer_rw_out_default = 0x00000000, + regk_timer_rw_test_default = 0x00000000, + regk_timer_rw_tmr0_ctrl_default = 0x00000000, + regk_timer_rw_tmr1_ctrl_default = 0x00000000, + regk_timer_rw_trig_cfg_default = 0x00000000, + regk_timer_start = 0x00000001, + regk_timer_stop = 0x00000000, + regk_timer_time = 0x00000001, + regk_timer_tmr0 = 0x00000002, + regk_timer_tmr1 = 0x00000003, + regk_timer_yes = 0x00000001 +}; +#endif /* __timer_defs_h */ diff --git a/arch/cris/include/arch-v32/mach-fs/mach/pinmux.h b/arch/cris/include/arch-v32/mach-fs/mach/pinmux.h new file mode 100644 index 000000000000..c2b3036779df --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/pinmux.h @@ -0,0 +1,38 @@ +#ifndef _ASM_CRIS_ARCH_PINMUX_H +#define _ASM_CRIS_ARCH_PINMUX_H + +#define PORT_B 0 +#define PORT_C 1 +#define PORT_D 2 +#define PORT_E 3 + +enum pin_mode { + pinmux_none = 0, + pinmux_fixed, + pinmux_gpio, + pinmux_iop +}; + +enum fixed_function { + pinmux_ser1, + pinmux_ser2, + pinmux_ser3, + pinmux_sser0, + pinmux_sser1, + pinmux_ata0, + pinmux_ata1, + pinmux_ata2, + pinmux_ata3, + pinmux_ata, + pinmux_eth1, + pinmux_timer +}; + +int crisv32_pinmux_init(void); +int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode); +int crisv32_pinmux_alloc_fixed(enum fixed_function function); +int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin); +int crisv32_pinmux_dealloc_fixed(enum fixed_function function); +void crisv32_pinmux_dump(void); + +#endif diff --git a/arch/cris/include/arch-v32/mach-fs/mach/startup.inc b/arch/cris/include/arch-v32/mach-fs/mach/startup.inc new file mode 100644 index 000000000000..4a10ccbd6cc1 --- /dev/null +++ b/arch/cris/include/arch-v32/mach-fs/mach/startup.inc @@ -0,0 +1,77 @@ +#include +#include +#include +#include + + .macro GIO_INIT + move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PA_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PB_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pc_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PC_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pc_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PD_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pd_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PD_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pd_oe), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PE_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pe_dout), $r1 + move.d $r0, [$r1] + + move.d CONFIG_ETRAX_DEF_GIO_PE_OE, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pe_oe), $r1 + move.d $r0, [$r1] + .endm + + .macro START_CLOCKS + move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 + move.d [$r1], $r0 + or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \ + REG_STATE(config, rw_clk_ctrl, bif, yes) | \ + REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 + move.d $r0, [$r1] + .endm + + .macro SETUP_WAIT_STATES + ;; Set up waitstates etc + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP1_CONFIG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP2_CONFIG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP3_CONFIG, $r1 + move.d $r1, [$r0] + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1 + move.d $r1, [$r0] +#ifdef CONFIG_ETRAX_VCS_SIM + ;; Set up minimal flash waitstates + move.d 0, $r10 + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11 + move.d $r10, [$r11] +#endif + .endm diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild new file mode 100644 index 000000000000..d5b631935ec8 --- /dev/null +++ b/arch/cris/include/asm/Kbuild @@ -0,0 +1,11 @@ +include include/asm-generic/Kbuild.asm + +header-y += arch-v10/ +header-y += arch-v32/ + +header-y += ethernet.h +header-y += rtc.h +header-y += sync_serial.h + +unifdef-y += etraxgpio.h +unifdef-y += rs485.h diff --git a/arch/cris/include/asm/atomic.h b/arch/cris/include/asm/atomic.h new file mode 100644 index 000000000000..f71ea686a2ea --- /dev/null +++ b/arch/cris/include/asm/atomic.h @@ -0,0 +1,164 @@ +/* $Id: atomic.h,v 1.3 2001/07/25 16:15:19 bjornw Exp $ */ + +#ifndef __ASM_CRIS_ATOMIC__ +#define __ASM_CRIS_ATOMIC__ + +#include + +#include +#include + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +typedef struct { volatile int counter; } atomic_t; + +#define ATOMIC_INIT(i) { (i) } + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v,i) (((v)->counter) = (i)) + +/* These should be written in asm but we do it in C for now. */ + +static inline void atomic_add(int i, volatile atomic_t *v) +{ + unsigned long flags; + cris_atomic_save(v, flags); + v->counter += i; + cris_atomic_restore(v, flags); +} + +static inline void atomic_sub(int i, volatile atomic_t *v) +{ + unsigned long flags; + cris_atomic_save(v, flags); + v->counter -= i; + cris_atomic_restore(v, flags); +} + +static inline int atomic_add_return(int i, volatile atomic_t *v) +{ + unsigned long flags; + int retval; + cris_atomic_save(v, flags); + retval = (v->counter += i); + cris_atomic_restore(v, flags); + return retval; +} + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +static inline int atomic_sub_return(int i, volatile atomic_t *v) +{ + unsigned long flags; + int retval; + cris_atomic_save(v, flags); + retval = (v->counter -= i); + cris_atomic_restore(v, flags); + return retval; +} + +static inline int atomic_sub_and_test(int i, volatile atomic_t *v) +{ + int retval; + unsigned long flags; + cris_atomic_save(v, flags); + retval = (v->counter -= i) == 0; + cris_atomic_restore(v, flags); + return retval; +} + +static inline void atomic_inc(volatile atomic_t *v) +{ + unsigned long flags; + cris_atomic_save(v, flags); + (v->counter)++; + cris_atomic_restore(v, flags); +} + +static inline void atomic_dec(volatile atomic_t *v) +{ + unsigned long flags; + cris_atomic_save(v, flags); + (v->counter)--; + cris_atomic_restore(v, flags); +} + +static inline int atomic_inc_return(volatile atomic_t *v) +{ + unsigned long flags; + int retval; + cris_atomic_save(v, flags); + retval = ++(v->counter); + cris_atomic_restore(v, flags); + return retval; +} + +static inline int atomic_dec_return(volatile atomic_t *v) +{ + unsigned long flags; + int retval; + cris_atomic_save(v, flags); + retval = --(v->counter); + cris_atomic_restore(v, flags); + return retval; +} +static inline int atomic_dec_and_test(volatile atomic_t *v) +{ + int retval; + unsigned long flags; + cris_atomic_save(v, flags); + retval = --(v->counter) == 0; + cris_atomic_restore(v, flags); + return retval; +} + +static inline int atomic_inc_and_test(volatile atomic_t *v) +{ + int retval; + unsigned long flags; + cris_atomic_save(v, flags); + retval = ++(v->counter) == 0; + cris_atomic_restore(v, flags); + return retval; +} + +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + cris_atomic_save(v, flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + cris_atomic_restore(v, flags); + return ret; +} + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + cris_atomic_save(v, flags); + ret = v->counter; + if (ret != u) + v->counter += a; + cris_atomic_restore(v, flags); + return ret != u; +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include +#endif diff --git a/arch/cris/include/asm/auxvec.h b/arch/cris/include/asm/auxvec.h new file mode 100644 index 000000000000..cb30b01bf19f --- /dev/null +++ b/arch/cris/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMCRIS_AUXVEC_H +#define __ASMCRIS_AUXVEC_H + +#endif diff --git a/arch/cris/include/asm/axisflashmap.h b/arch/cris/include/asm/axisflashmap.h new file mode 100644 index 000000000000..015ca5445ddd --- /dev/null +++ b/arch/cris/include/asm/axisflashmap.h @@ -0,0 +1,61 @@ +#ifndef __ASM_AXISFLASHMAP_H +#define __ASM_AXISFLASHMAP_H + +/* Bootblock parameters are stored at 0xc000 and has the FLASH_BOOT_MAGIC + * as start, it ends with 0xFFFFFFFF */ +#define FLASH_BOOT_MAGIC 0xbeefcace +#define BOOTPARAM_OFFSET 0xc000 +/* apps/bootblocktool is used to read and write the parameters, + * and it has nothing to do with the partition table. + */ + +#define PARTITION_TABLE_OFFSET 10 +#define PARTITION_TABLE_MAGIC 0xbeef /* Not a good magic */ + +/* The partitiontable_head is located at offset +10: */ +struct partitiontable_head { + __u16 magic; /* PARTITION_TABLE_MAGIC */ + __u16 size; /* Length of ptable block (entries + end marker) */ + __u32 checksum; /* simple longword sum, over entries + end marker */ +}; + +/* And followed by partition table entries */ +struct partitiontable_entry { + __u32 offset; /* relative to the sector the ptable is in */ + __u32 size; /* in bytes */ + __u32 checksum; /* simple longword sum */ + __u16 type; /* see type codes below */ + __u16 flags; /* bit 0: ro/rw = 1/0 */ + __u32 future0; /* 16 bytes reserved for future use */ + __u32 future1; + __u32 future2; + __u32 future3; +}; +/* ended by an end marker: */ +#define PARTITIONTABLE_END_MARKER 0xFFFFFFFF +#define PARTITIONTABLE_END_MARKER_SIZE 4 + +#define PARTITIONTABLE_END_PAD 10 + +/* Complete structure for whole partition table */ +/* note that table may end before CONFIG_ETRAX_PTABLE_ENTRIES by setting + * offset of the last entry + 1 to PARTITIONTABLE_END_MARKER. + */ +struct partitiontable { + __u8 skip[PARTITION_TABLE_OFFSET]; + struct partitiontable_head head; + struct partitiontable_entry entries[]; +}; + +#define PARTITION_TYPE_PARAM 0x0001 +#define PARTITION_TYPE_KERNEL 0x0002 +#define PARTITION_TYPE_JFFS 0x0003 +#define PARTITION_TYPE_JFFS2 0x0000 + +#define PARTITION_FLAGS_READONLY_MASK 0x0001 +#define PARTITION_FLAGS_READONLY 0x0001 + +/* The master mtd for the entire flash. */ +extern struct mtd_info *axisflash_mtd; + +#endif diff --git a/arch/cris/include/asm/bitops.h b/arch/cris/include/asm/bitops.h new file mode 100644 index 000000000000..c0e62f811e09 --- /dev/null +++ b/arch/cris/include/asm/bitops.h @@ -0,0 +1,166 @@ +/* asm/bitops.h for Linux/CRIS + * + * TODO: asm versions if speed is needed + * + * All bit operations return 0 if the bit was cleared before the + * operation and != 0 if it was not. + * + * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). + */ + +#ifndef _CRIS_BITOPS_H +#define _CRIS_BITOPS_H + +/* Currently this is unsuitable for consumption outside the kernel. */ +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +#include +#include +#include + +/* + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ + +#define set_bit(nr, addr) (void)test_and_set_bit(nr, addr) + +/* + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ + +#define clear_bit(nr, addr) (void)test_and_clear_bit(nr, addr) + +/* + * change_bit - Toggle a bit in memory + * @nr: Bit to change + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ + +#define change_bit(nr, addr) (void)test_and_change_bit(nr, addr) + +/** + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ + +static inline int test_and_set_bit(int nr, volatile unsigned long *addr) +{ + unsigned int mask, retval; + unsigned long flags; + unsigned int *adr = (unsigned int *)addr; + + adr += nr >> 5; + mask = 1 << (nr & 0x1f); + cris_atomic_save(addr, flags); + retval = (mask & *adr) != 0; + *adr |= mask; + cris_atomic_restore(addr, flags); + return retval; +} + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/** + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ + +static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) +{ + unsigned int mask, retval; + unsigned long flags; + unsigned int *adr = (unsigned int *)addr; + + adr += nr >> 5; + mask = 1 << (nr & 0x1f); + cris_atomic_save(addr, flags); + retval = (mask & *adr) != 0; + *adr &= ~mask; + cris_atomic_restore(addr, flags); + return retval; +} + +/** + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to change + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ + +static inline int test_and_change_bit(int nr, volatile unsigned long *addr) +{ + unsigned int mask, retval; + unsigned long flags; + unsigned int *adr = (unsigned int *)addr; + adr += nr >> 5; + mask = 1 << (nr & 0x1f); + cris_atomic_save(addr, flags); + retval = (mask & *adr) != 0; + *adr ^= mask; + cris_atomic_restore(addr, flags); + return retval; +} + +#include + +/* + * Since we define it "external", it collides with the built-in + * definition, which doesn't have the same semantics. We don't want to + * use -fno-builtin, so just hide the name ffs. + */ +#define ffs kernel_ffs + +#include +#include +#include +#include +#include + +#include + +#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a) +#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a) + +#include +#include + +#endif /* __KERNEL__ */ + +#endif /* _CRIS_BITOPS_H */ diff --git a/arch/cris/include/asm/bug.h b/arch/cris/include/asm/bug.h new file mode 100644 index 000000000000..3b3958963801 --- /dev/null +++ b/arch/cris/include/asm/bug.h @@ -0,0 +1,4 @@ +#ifndef _CRIS_BUG_H +#define _CRIS_BUG_H +#include +#endif diff --git a/arch/cris/include/asm/bugs.h b/arch/cris/include/asm/bugs.h new file mode 100644 index 000000000000..c5907aac1007 --- /dev/null +++ b/arch/cris/include/asm/bugs.h @@ -0,0 +1,21 @@ +/* $Id: bugs.h,v 1.2 2001/01/17 17:03:18 bjornw Exp $ + * + * include/asm-cris/bugs.h + * + * Copyright (C) 2001 Axis Communications AB + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +static void check_bugs(void) +{ +} + + + + diff --git a/arch/cris/include/asm/byteorder.h b/arch/cris/include/asm/byteorder.h new file mode 100644 index 000000000000..cc8e418cfd14 --- /dev/null +++ b/arch/cris/include/asm/byteorder.h @@ -0,0 +1,27 @@ +#ifndef _CRIS_BYTEORDER_H +#define _CRIS_BYTEORDER_H + +#ifdef __GNUC__ + +#ifdef __KERNEL__ +#include + +/* defines are necessary because the other files detect the presence + * of a defined __arch_swab32, not an inline + */ +#define __arch__swab32(x) ___arch__swab32(x) +#define __arch__swab16(x) ___arch__swab16(x) +#endif /* __KERNEL__ */ + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#endif /* __GNUC__ */ + +#include + +#endif + + diff --git a/arch/cris/include/asm/cache.h b/arch/cris/include/asm/cache.h new file mode 100644 index 000000000000..a692b9fba8b9 --- /dev/null +++ b/arch/cris/include/asm/cache.h @@ -0,0 +1,6 @@ +#ifndef _ASM_CACHE_H +#define _ASM_CACHE_H + +#include + +#endif /* _ASM_CACHE_H */ diff --git a/arch/cris/include/asm/cacheflush.h b/arch/cris/include/asm/cacheflush.h new file mode 100644 index 000000000000..cf60e3f69f8d --- /dev/null +++ b/arch/cris/include/asm/cacheflush.h @@ -0,0 +1,31 @@ +#ifndef _CRIS_CACHEFLUSH_H +#define _CRIS_CACHEFLUSH_H + +/* Keep includes the same across arches. */ +#include + +/* The cache doesn't need to be flushed when TLB entries change because + * the cache is mapped to physical memory, not virtual memory + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +int change_page_attr(struct page *page, int numpages, pgprot_t prot); + +#endif /* _CRIS_CACHEFLUSH_H */ diff --git a/arch/cris/include/asm/checksum.h b/arch/cris/include/asm/checksum.h new file mode 100644 index 000000000000..75dcb77d6cb0 --- /dev/null +++ b/arch/cris/include/asm/checksum.h @@ -0,0 +1,83 @@ +/* TODO: csum_tcpudp_magic could be speeded up, and csum_fold as well */ + +#ifndef _CRIS_CHECKSUM_H +#define _CRIS_CHECKSUM_H + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); + +/* + * Fold a partial checksum into a word + */ + +static inline __sum16 csum_fold(__wsum csum) +{ + u32 sum = (__force u32)csum; + sum = (sum & 0xffff) + (sum >> 16); /* add in end-around carry */ + sum = (sum & 0xffff) + (sum >> 16); /* add in end-around carry */ + return (__force __sum16)~sum; +} + +extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, + int *errptr); + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + */ + +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + return csum_fold(csum_partial(iph, ihl * 4, 0)); +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ + +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold (csum_partial(buff, len, 0)); +} + +#endif diff --git a/arch/cris/include/asm/cputime.h b/arch/cris/include/asm/cputime.h new file mode 100644 index 000000000000..4446a65656fa --- /dev/null +++ b/arch/cris/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __CRIS_CPUTIME_H +#define __CRIS_CPUTIME_H + +#include + +#endif /* __CRIS_CPUTIME_H */ diff --git a/arch/cris/include/asm/current.h b/arch/cris/include/asm/current.h new file mode 100644 index 000000000000..5f5c0efd00be --- /dev/null +++ b/arch/cris/include/asm/current.h @@ -0,0 +1,15 @@ +#ifndef _CRIS_CURRENT_H +#define _CRIS_CURRENT_H + +#include + +struct task_struct; + +static inline struct task_struct * get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() + +#endif /* !(_CRIS_CURRENT_H) */ diff --git a/arch/cris/include/asm/delay.h b/arch/cris/include/asm/delay.h new file mode 100644 index 000000000000..75ec581bfead --- /dev/null +++ b/arch/cris/include/asm/delay.h @@ -0,0 +1,27 @@ +#ifndef _CRIS_DELAY_H +#define _CRIS_DELAY_H + +/* + * Copyright (C) 1998-2002 Axis Communications AB + * + * Delay routines, using a pre-computed "loops_per_second" value. + */ + +#include + +/* Use only for very small delays ( < 1 msec). */ + +extern unsigned long loops_per_usec; /* arch/cris/mm/init.c */ + +/* May be defined by arch/delay.h. */ +#ifndef udelay +static inline void udelay(unsigned long usecs) +{ + __delay(usecs * loops_per_usec); +} +#endif + +#endif /* defined(_CRIS_DELAY_H) */ + + + diff --git a/arch/cris/include/asm/device.h b/arch/cris/include/asm/device.h new file mode 100644 index 000000000000..d8f9872b0e2d --- /dev/null +++ b/arch/cris/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + diff --git a/arch/cris/include/asm/div64.h b/arch/cris/include/asm/div64.h new file mode 100644 index 000000000000..6cd978cefb28 --- /dev/null +++ b/arch/cris/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/cris/include/asm/dma-mapping.h b/arch/cris/include/asm/dma-mapping.h new file mode 100644 index 000000000000..da8ef8e8f842 --- /dev/null +++ b/arch/cris/include/asm/dma-mapping.h @@ -0,0 +1,170 @@ +/* DMA mapping. Nothing tricky here, just virt_to_phys */ + +#ifndef _ASM_CRIS_DMA_MAPPING_H +#define _ASM_CRIS_DMA_MAPPING_H + +#include +#include + +#include +#include +#include + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + +#ifdef CONFIG_PCI +#include + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); +#else +static inline void * +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t flag) +{ + BUG(); + return NULL; +} + +static inline void +dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle) +{ + BUG(); +} +#endif +static inline dma_addr_t +dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + return virt_to_phys(ptr); +} + +static inline void +dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + printk("Map sg\n"); + return nents; +} + +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + return page_to_phys(page) + offset; +} + +static inline void +dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + + +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ +} + +static inline void +dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ +} + +static inline void +dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ +} + +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ +} + +static inline void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ +} + +static inline int +dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +static inline int +dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, + * so we can't guarantee allocations that must be + * within a tighter range than GFP_DMA.. + */ + if(mask < 0x00ffffff) + return 0; + + return 1; +} + +static inline int +dma_set_mask(struct device *dev, u64 mask) +{ + if(!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + + return 0; +} + +static inline int +dma_get_cache_alignment(void) +{ + return (1 << INTERNODE_CACHE_SHIFT); +} + +#define dma_is_consistent(d, h) (1) + +static inline void +dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ +} + + +#endif diff --git a/arch/cris/include/asm/dma.h b/arch/cris/include/asm/dma.h new file mode 100644 index 000000000000..30fd715fa589 --- /dev/null +++ b/arch/cris/include/asm/dma.h @@ -0,0 +1,21 @@ +/* $Id: dma.h,v 1.2 2001/05/09 12:17:42 johana Exp $ */ + +#ifndef _ASM_DMA_H +#define _ASM_DMA_H + +#include + +/* it's useless on the Etrax, but unfortunately needed by the new + bootmem allocator (but this should do it for this) */ + +#define MAX_DMA_ADDRESS PAGE_OFFSET + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* _ASM_DMA_H */ diff --git a/arch/cris/include/asm/elf.h b/arch/cris/include/asm/elf.h new file mode 100644 index 000000000000..0f51b10b9f4f --- /dev/null +++ b/arch/cris/include/asm/elf.h @@ -0,0 +1,93 @@ +#ifndef __ASMCRIS_ELF_H +#define __ASMCRIS_ELF_H + +/* + * ELF register definitions.. + */ + +#include + +#define R_CRIS_NONE 0 +#define R_CRIS_8 1 +#define R_CRIS_16 2 +#define R_CRIS_32 3 +#define R_CRIS_8_PCREL 4 +#define R_CRIS_16_PCREL 5 +#define R_CRIS_32_PCREL 6 +#define R_CRIS_GNU_VTINHERIT 7 +#define R_CRIS_GNU_VTENTRY 8 +#define R_CRIS_COPY 9 +#define R_CRIS_GLOB_DAT 10 +#define R_CRIS_JUMP_SLOT 11 +#define R_CRIS_RELATIVE 12 +#define R_CRIS_16_GOT 13 +#define R_CRIS_32_GOT 14 +#define R_CRIS_16_GOTPLT 15 +#define R_CRIS_32_GOTPLT 16 +#define R_CRIS_32_GOTREL 17 +#define R_CRIS_32_PLT_GOTREL 18 +#define R_CRIS_32_PLT_PCREL 19 + +typedef unsigned long elf_greg_t; + +/* Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is + thus exposed to user-space. */ +#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +/* A placeholder; CRIS does not have any fp regs. */ +typedef unsigned long elf_fpregset_t; + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_CRIS + +#include + +/* The master for these definitions is {binutils}/include/elf/cris.h: */ +/* User symbols in this file have a leading underscore. */ +#define EF_CRIS_UNDERSCORE 0x00000001 + +/* This is a mask for different incompatible machine variants. */ +#define EF_CRIS_VARIANT_MASK 0x0000000e + +/* Variant 0; may contain v0..10 object. */ +#define EF_CRIS_VARIANT_ANY_V0_V10 0x00000000 + +/* Variant 1; contains v32 object. */ +#define EF_CRIS_VARIANT_V32 0x00000002 + +/* Variant 2; contains object compatible with v32 and v10. */ +#define EF_CRIS_VARIANT_COMMON_V10_V32 0x00000004 +/* End of excerpt from {binutils}/include/elf/cris.h. */ + +#define USE_ELF_CORE_DUMP + +#define ELF_EXEC_PAGESIZE 8192 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. This could be done in user space, + but it's not easy, and we've already done it here. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. +*/ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) + +#endif diff --git a/arch/cris/include/asm/emergency-restart.h b/arch/cris/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/cris/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/cris/include/asm/errno.h b/arch/cris/include/asm/errno.h new file mode 100644 index 000000000000..2bf5eb5fa773 --- /dev/null +++ b/arch/cris/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef _CRIS_ERRNO_H +#define _CRIS_ERRNO_H + +#include + +#endif diff --git a/arch/cris/include/asm/eshlibld.h b/arch/cris/include/asm/eshlibld.h new file mode 100644 index 000000000000..10ce36cf79a9 --- /dev/null +++ b/arch/cris/include/asm/eshlibld.h @@ -0,0 +1,113 @@ +/*!************************************************************************** +*! +*! FILE NAME : eshlibld.h +*! +*! DESCRIPTION: Prototypes for exported shared library functions +*! +*! FUNCTIONS : perform_cris_aout_relocations, shlibmod_fork, shlibmod_exit +*! (EXPORTED) +*! +*!--------------------------------------------------------------------------- +*! +*! (C) Copyright 1998, 1999 Axis Communications AB, LUND, SWEDEN +*! +*!**************************************************************************/ +/* $Id: eshlibld.h,v 1.2 2001/02/23 13:47:33 bjornw Exp $ */ + +#ifndef _cris_relocate_h +#define _cris_relocate_h + +/* Please note that this file is also compiled into the xsim simulator. + Try to avoid breaking its double use (only works on a little-endian + 32-bit machine such as the i386 anyway). + + Use __KERNEL__ when you're about to use kernel functions, + (which you should not do here anyway, since this file is + used by glibc). + Use defined(__KERNEL__) || defined(__elinux__) when doing + things that only makes sense on an elinux system. + Use __CRIS__ when you're about to do (really) CRIS-specific code. +*/ + +/* We have dependencies all over the place for the host system + for xsim being a linux system, so let's not pretend anything + else with #ifdef:s here until fixed. */ +#include + +/* Maybe do sanity checking if file input. */ +#undef SANITYCHECK_RELOC + +/* Maybe output debug messages. */ +#undef RELOC_DEBUG + +/* Maybe we want to share core as well as disk space. + Mainly depends on the config macro CONFIG_SHARE_SHLIB_CORE, but it is + assumed that we want to share code when debugging (exposes more + trouble). */ +#ifndef SHARE_LIB_CORE +# if (defined(__KERNEL__) || !defined(RELOC_DEBUG)) \ + && !defined(CONFIG_SHARE_SHLIB_CORE) +# define SHARE_LIB_CORE 0 +# else +# define SHARE_LIB_CORE 1 +# endif /* __KERNEL__ etc */ +#endif /* SHARE_LIB_CORE */ + + +/* Main exported function; supposed to be called when the program a.out + has been read in. */ +extern int +perform_cris_aout_relocations(unsigned long text, unsigned long tlength, + unsigned long data, unsigned long dlength, + unsigned long baddr, unsigned long blength, + + /* These may be zero when there's "perfect" + position-independent code. */ + unsigned char *trel, unsigned long tsrel, + unsigned long dsrel, + + /* These will be zero at a first try, to see + if code is statically linked. Else a + second try, with the symbol table and + string table nonzero should be done. */ + unsigned char *symbols, unsigned long symlength, + unsigned char *strings, unsigned long stringlength, + + /* These will only be used when symbol table + information is present. */ + char **env, int envc, + int euid, int is_suid); + + +#ifdef RELOC_DEBUG +/* Task-specific debug stuff. */ +struct task_reloc_debug { + struct memdebug *alloclast; + unsigned long alloc_total; + unsigned long export_total; +}; +#endif /* RELOC_DEBUG */ + +#if SHARE_LIB_CORE + +/* When code (and some very specific data) is shared and not just + dynamically linked, we need to export hooks for exec beginning and + end. */ + +struct shlibdep; + +extern void +shlibmod_exit(struct shlibdep **deps); + +/* Returns 0 if failure, nonzero for ok. */ +extern int +shlibmod_fork(struct shlibdep **deps); + +#else /* ! SHARE_LIB_CORE */ +# define shlibmod_exit(x) +# define shlibmod_fork(x) 1 +#endif /* ! SHARE_LIB_CORE */ + +#endif _cris_relocate_h +/********************** END OF FILE eshlibld.h *****************************/ + diff --git a/arch/cris/include/asm/ethernet.h b/arch/cris/include/asm/ethernet.h new file mode 100644 index 000000000000..4d58652c3a49 --- /dev/null +++ b/arch/cris/include/asm/ethernet.h @@ -0,0 +1,21 @@ +/* + * ioctl defines for ethernet driver + * + * Copyright (c) 2001 Axis Communications AB + * + * Author: Mikael Starvik + * + */ + +#ifndef _CRIS_ETHERNET_H +#define _CRIS_ETHERNET_H +#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE /* Auto neg speed */ +#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1 /* 10 Mbps */ +#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2 /* 100 Mbps. */ +#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3 /* Auto neg duplex */ +#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4 /* Full duplex */ +#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5 /* Half duplex */ +#define SET_ETH_ENABLE_LEDS SIOCDEVPRIVATE+6 /* Enable net LEDs */ +#define SET_ETH_DISABLE_LEDS SIOCDEVPRIVATE+7 /* Disable net LEDs */ +#define SET_ETH_AUTONEG SIOCDEVPRIVATE+8 +#endif /* _CRIS_ETHERNET_H */ diff --git a/arch/cris/include/asm/etraxgpio.h b/arch/cris/include/asm/etraxgpio.h new file mode 100644 index 000000000000..38f1c8e1770c --- /dev/null +++ b/arch/cris/include/asm/etraxgpio.h @@ -0,0 +1,179 @@ +/* + * The following devices are accessable using this driver using + * GPIO_MAJOR (120) and a couple of minor numbers. + * + * For ETRAX 100LX (CONFIG_ETRAX_ARCH_V10): + * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction + * /dev/gpiob minor 1, 8 bit GPIO, each bit can change direction + * /dev/leds minor 2, Access to leds depending on kernelconfig + * /dev/gpiog minor 3 + * g0dir, g8_15dir, g16_23dir, g24 dir configurable in R_GEN_CONFIG + * g1-g7 and g25-g31 is both input and outputs but on different pins + * Also note that some bits change pins depending on what interfaces + * are enabled. + * + * For ETRAX FS (CONFIG_ETRAXFS): + * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction + * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction + * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction + * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction + * /dev/gpioe minor 5, 18 bit GPIO, each bit can change direction + * /dev/leds minor 2, Access to leds depending on kernelconfig + * + * For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3): + * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction + * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction + * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction + * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction + * /dev/leds minor 2, Access to leds depending on kernelconfig + * /dev/pwm0 minor 16, PWM channel 0 on PA30 + * /dev/pwm1 minor 17, PWM channel 1 on PA31 + * /dev/pwm2 minor 18, PWM channel 2 on PB26 + * + */ +#ifndef _ASM_ETRAXGPIO_H +#define _ASM_ETRAXGPIO_H + +/* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */ +#ifdef CONFIG_ETRAX_ARCH_V10 +#define ETRAXGPIO_IOCTYPE 43 +#define GPIO_MINOR_A 0 +#define GPIO_MINOR_B 1 +#define GPIO_MINOR_LEDS 2 +#define GPIO_MINOR_G 3 +#define GPIO_MINOR_LAST 3 +#endif + +#ifdef CONFIG_ETRAXFS +#define ETRAXGPIO_IOCTYPE 43 +#define GPIO_MINOR_A 0 +#define GPIO_MINOR_B 1 +#define GPIO_MINOR_LEDS 2 +#define GPIO_MINOR_C 3 +#define GPIO_MINOR_D 4 +#define GPIO_MINOR_E 5 +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +#define GPIO_MINOR_V 6 +#define GPIO_MINOR_LAST 6 +#else +#define GPIO_MINOR_LAST 5 +#endif +#endif + +#ifdef CONFIG_CRIS_MACH_ARTPEC3 +#define ETRAXGPIO_IOCTYPE 43 +#define GPIO_MINOR_A 0 +#define GPIO_MINOR_B 1 +#define GPIO_MINOR_LEDS 2 +#define GPIO_MINOR_C 3 +#define GPIO_MINOR_D 4 +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO +#define GPIO_MINOR_V 6 +#define GPIO_MINOR_LAST 6 +#else +#define GPIO_MINOR_LAST 4 +#endif +#define GPIO_MINOR_PWM0 16 +#define GPIO_MINOR_PWM1 17 +#define GPIO_MINOR_PWM2 18 +#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PWM2 +#endif + +/* supported ioctl _IOC_NR's */ + +#define IO_READBITS 0x1 /* read and return current port bits (obsolete) */ +#define IO_SETBITS 0x2 /* set the bits marked by 1 in the argument */ +#define IO_CLRBITS 0x3 /* clear the bits marked by 1 in the argument */ + +/* the alarm is waited for by select() */ + +#define IO_HIGHALARM 0x4 /* set alarm on high for bits marked by 1 */ +#define IO_LOWALARM 0x5 /* set alarm on low for bits marked by 1 */ +#define IO_CLRALARM 0x6 /* clear alarm for bits marked by 1 */ + +/* LED ioctl */ +#define IO_LEDACTIVE_SET 0x7 /* set active led + * 0=off, 1=green, 2=red, 3=yellow */ + +/* GPIO direction ioctl's */ +#define IO_READDIR 0x8 /* Read direction 0=input 1=output (obsolete) */ +#define IO_SETINPUT 0x9 /* Set direction for bits set, 0=unchanged 1=input, + returns mask with current inputs (obsolete) */ +#define IO_SETOUTPUT 0xA /* Set direction for bits set, 0=unchanged 1=output, + returns mask with current outputs (obsolete)*/ + +/* LED ioctl extended */ +#define IO_LED_SETBIT 0xB +#define IO_LED_CLRBIT 0xC + +/* SHUTDOWN ioctl */ +#define IO_SHUTDOWN 0xD +#define IO_GET_PWR_BT 0xE + +/* Bit toggling in driver settings */ +/* bit set in low byte0 is CLK mask (0x00FF), + bit set in byte1 is DATA mask (0xFF00) + msb, data_mask[7:0] , clk_mask[7:0] + */ +#define IO_CFG_WRITE_MODE 0xF +#define IO_CFG_WRITE_MODE_VALUE(msb, data_mask, clk_mask) \ + ( (((msb)&1) << 16) | (((data_mask) &0xFF) << 8) | ((clk_mask) & 0xFF) ) + +/* The following 4 ioctl's take a pointer as argument and handles + * 32 bit ports (port G) properly. + * These replaces IO_READBITS,IO_SETINPUT AND IO_SETOUTPUT + */ +#define IO_READ_INBITS 0x10 /* *arg is result of reading the input pins */ +#define IO_READ_OUTBITS 0x11 /* *arg is result of reading the output shadow */ +#define IO_SETGET_INPUT 0x12 /* bits set in *arg is set to input, + * *arg updated with current input pins. + */ +#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, + * *arg updated with current output pins. + */ + +/* The following ioctl's are applicable to the PWM channels only */ + +#define IO_PWM_SET_MODE 0x20 + +enum io_pwm_mode { + PWM_OFF = 0, /* disabled, deallocated */ + PWM_STANDARD = 1, /* 390 kHz, duty cycle 0..255/256 */ + PWM_FAST = 2, /* variable freq, w/ 10ns active pulse len */ + PWM_VARFREQ = 3 /* individually configurable high/low periods */ +}; + +struct io_pwm_set_mode { + enum io_pwm_mode mode; +}; + +/* Only for mode PWM_VARFREQ. Period lo/high set in increments of 10ns + * from 10ns (value = 0) to 81920ns (value = 8191) + * (Resulting frequencies range from 50 MHz (10ns + 10ns) down to + * 6.1 kHz (81920ns + 81920ns) at 50% duty cycle, to 12.2 kHz at min/max duty + * cycle (81920 + 10ns or 10ns + 81920ns, respectively).) + */ +#define IO_PWM_SET_PERIOD 0x21 + +struct io_pwm_set_period { + unsigned int lo; /* 0..8191 */ + unsigned int hi; /* 0..8191 */ +}; + +/* Only for modes PWM_STANDARD and PWM_FAST. + * For PWM_STANDARD, set duty cycle of 390 kHz PWM output signal, from + * 0 (value = 0) to 255/256 (value = 255). + * For PWM_FAST, set duty cycle of PWM output signal from + * 0% (value = 0) to 100% (value = 255). Output signal in this mode + * is a 10ns pulse surrounded by a high or low level depending on duty + * cycle (except for 0% and 100% which result in a constant output). + * Resulting output frequency varies from 50 MHz at 50% duty cycle, + * down to 390 kHz at min/max duty cycle. + */ +#define IO_PWM_SET_DUTY 0x22 + +struct io_pwm_set_duty { + int duty; /* 0..255 */ +}; + +#endif diff --git a/arch/cris/include/asm/etraxi2c.h b/arch/cris/include/asm/etraxi2c.h new file mode 100644 index 000000000000..e369a7620893 --- /dev/null +++ b/arch/cris/include/asm/etraxi2c.h @@ -0,0 +1,36 @@ +/* $Id: etraxi2c.h,v 1.1 2001/01/18 15:49:57 bjornw Exp $ */ + +#ifndef _LINUX_ETRAXI2C_H +#define _LINUX_ETRAXI2C_H + +/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */ + +#define ETRAXI2C_IOCTYPE 44 + +/* supported ioctl _IOC_NR's */ + +/* in write operations, the argument contains both i2c + * slave, register and value. + */ + +#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value)) +#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8)) + +#define I2C_ARGSLAVE(arg) ((arg) >> 16) +#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff) +#define I2C_ARGVALUE(arg) ((arg) & 0xff) + +#define I2C_WRITEREG 0x1 /* write to an i2c register */ +#define I2C_READREG 0x2 /* read from an i2c register */ + +/* +EXAMPLE usage: + + i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val); + ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg); + + i2c_arg = I2C_READARG(STA013_READ_ADDR, reg); + val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg); + +*/ +#endif diff --git a/arch/cris/include/asm/fasttimer.h b/arch/cris/include/asm/fasttimer.h new file mode 100644 index 000000000000..8f8a8d6c9653 --- /dev/null +++ b/arch/cris/include/asm/fasttimer.h @@ -0,0 +1,47 @@ +/* + * linux/include/asm-cris/fasttimer.h + * + * Fast timers for ETRAX100LX + * Copyright (C) 2000-2007 Axis Communications AB + */ +#include /* struct timeval */ +#include + +#ifdef CONFIG_ETRAX_FAST_TIMER + +typedef void fast_timer_function_type(unsigned long); + +struct fasttime_t { + unsigned long tv_jiff; /* jiffies */ + unsigned long tv_usec; /* microseconds */ +}; + +struct fast_timer{ /* Close to timer_list */ + struct fast_timer *next; + struct fast_timer *prev; + struct fasttime_t tv_set; + struct fasttime_t tv_expires; + unsigned long delay_us; + fast_timer_function_type *function; + unsigned long data; + const char *name; +}; + +extern struct fast_timer *fast_timer_list; + +void start_one_shot_timer(struct fast_timer *t, + fast_timer_function_type *function, + unsigned long data, + unsigned long delay_us, + const char *name); + +int del_fast_timer(struct fast_timer * t); +/* return 1 if deleted */ + + +void schedule_usleep(unsigned long us); + + +int fast_timer_init(void); + +#endif diff --git a/arch/cris/include/asm/fb.h b/arch/cris/include/asm/fb.h new file mode 100644 index 000000000000..c7df38030992 --- /dev/null +++ b/arch/cris/include/asm/fb.h @@ -0,0 +1,12 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ +#include + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/cris/include/asm/fcntl.h b/arch/cris/include/asm/fcntl.h new file mode 100644 index 000000000000..46ab12db5739 --- /dev/null +++ b/arch/cris/include/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/cris/include/asm/futex.h b/arch/cris/include/asm/futex.h new file mode 100644 index 000000000000..6a332a9f099c --- /dev/null +++ b/arch/cris/include/asm/futex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include + +#endif diff --git a/arch/cris/include/asm/hardirq.h b/arch/cris/include/asm/hardirq.h new file mode 100644 index 000000000000..74178adeb1cd --- /dev/null +++ b/arch/cris/include/asm/hardirq.h @@ -0,0 +1,27 @@ +#ifndef __ASM_HARDIRQ_H +#define __ASM_HARDIRQ_H + +#include +#include +#include + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +void ack_bad_irq(unsigned int irq); + +#define HARDIRQ_BITS 8 + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +#endif /* __ASM_HARDIRQ_H */ diff --git a/arch/cris/include/asm/hw_irq.h b/arch/cris/include/asm/hw_irq.h new file mode 100644 index 000000000000..298066020af2 --- /dev/null +++ b/arch/cris/include/asm/hw_irq.h @@ -0,0 +1,5 @@ +#ifndef _ASM_HW_IRQ_H +#define _ASM_HW_IRQ_H + +#endif + diff --git a/arch/cris/include/asm/io.h b/arch/cris/include/asm/io.h new file mode 100644 index 000000000000..32567bc2a421 --- /dev/null +++ b/arch/cris/include/asm/io.h @@ -0,0 +1,154 @@ +#ifndef _ASM_CRIS_IO_H +#define _ASM_CRIS_IO_H + +#include /* for __va, __pa */ +#include +#include + +struct cris_io_operations +{ + u32 (*read_mem)(void *addr, int size); + void (*write_mem)(u32 val, int size, void *addr); + u32 (*read_io)(u32 port, void *addr, int size, int count); + void (*write_io)(u32 port, void *addr, int size, int count); +}; + +#ifdef CONFIG_PCI +extern struct cris_io_operations *cris_iops; +#else +#define cris_iops ((struct cris_io_operations*)NULL) +#endif + +/* + * Change virtual addresses to physical addresses and vv. + */ + +static inline unsigned long virt_to_phys(volatile void * address) +{ + return __pa(address); +} + +static inline void * phys_to_virt(unsigned long address) +{ + return __va(address); +} + +extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); +extern void __iomem * __ioremap_prot(unsigned long phys_addr, unsigned long size, pgprot_t prot); + +static inline void __iomem * ioremap (unsigned long offset, unsigned long size) +{ + return __ioremap(offset, size, 0); +} + +extern void iounmap(volatile void * __iomem addr); + +extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size); + +/* + * IO bus memory addresses are also 1:1 with the physical address + */ +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the CRIS architecture, we just read/write the + * memory location directly. + */ +#ifdef CONFIG_PCI +#define PCI_SPACE(x) ((((unsigned)(x)) & 0x10000000) == 0x10000000) +#else +#define PCI_SPACE(x) 0 +#endif +static inline unsigned char readb(const volatile void __iomem *addr) +{ + if (PCI_SPACE(addr) && cris_iops) + return cris_iops->read_mem((void*)addr, 1); + else + return *(volatile unsigned char __force *) addr; +} +static inline unsigned short readw(const volatile void __iomem *addr) +{ + if (PCI_SPACE(addr) && cris_iops) + return cris_iops->read_mem((void*)addr, 2); + else + return *(volatile unsigned short __force *) addr; +} +static inline unsigned int readl(const volatile void __iomem *addr) +{ + if (PCI_SPACE(addr) && cris_iops) + return cris_iops->read_mem((void*)addr, 4); + else + return *(volatile unsigned int __force *) addr; +} +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl + +static inline void writeb(unsigned char b, volatile void __iomem *addr) +{ + if (PCI_SPACE(addr) && cris_iops) + cris_iops->write_mem(b, 1, (void*)addr); + else + *(volatile unsigned char __force *) addr = b; +} +static inline void writew(unsigned short b, volatile void __iomem *addr) +{ + if (PCI_SPACE(addr) && cris_iops) + cris_iops->write_mem(b, 2, (void*)addr); + else + *(volatile unsigned short __force *) addr = b; +} +static inline void writel(unsigned int b, volatile void __iomem *addr) +{ + if (PCI_SPACE(addr) && cris_iops) + cris_iops->write_mem(b, 4, (void*)addr); + else + *(volatile unsigned int __force *) addr = b; +} +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +#define mmiowb() + +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + + +/* I/O port access. Normally there is no I/O space on CRIS but when + * Cardbus/PCI is enabled the request is passed through the bridge. + */ + +#define IO_SPACE_LIMIT 0xffff +#define inb(port) (cris_iops ? cris_iops->read_io(port,NULL,1,1) : 0) +#define inw(port) (cris_iops ? cris_iops->read_io(port,NULL,2,1) : 0) +#define inl(port) (cris_iops ? cris_iops->read_io(port,NULL,4,1) : 0) +#define insb(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,1,count) : 0) +#define insw(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,2,count) : 0) +#define insl(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,4,count) : 0) +#define outb(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,1,1) +#define outw(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,2,1) +#define outl(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,4,1) +#define outsb(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,1,count) +#define outsw(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,2,count) +#define outsl(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,3,count) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif diff --git a/arch/cris/include/asm/ioctl.h b/arch/cris/include/asm/ioctl.h new file mode 100644 index 000000000000..b279fe06dfe5 --- /dev/null +++ b/arch/cris/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/cris/include/asm/ioctls.h b/arch/cris/include/asm/ioctls.h new file mode 100644 index 000000000000..4f4e52531fa0 --- /dev/null +++ b/arch/cris/include/asm/ioctls.h @@ -0,0 +1,91 @@ +#ifndef __ARCH_CRIS_IOCTLS_H__ +#define __ARCH_CRIS_IOCTLS_H__ + +/* verbatim copy of asm-i386/ioctls.h */ + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ +#define FIOQSIZE 0x5460 + +#define TIOCSERSETRS485 0x5461 /* enable rs-485 */ +#define TIOCSERWRRS485 0x5462 /* write rs-485 */ + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif diff --git a/arch/cris/include/asm/ipcbuf.h b/arch/cris/include/asm/ipcbuf.h new file mode 100644 index 000000000000..8b0c18b02844 --- /dev/null +++ b/arch/cris/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __CRIS_IPCBUF_H__ +#define __CRIS_IPCBUF_H__ + +/* + * The user_ipc_perm structure for CRIS architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __CRIS_IPCBUF_H__ */ diff --git a/arch/cris/include/asm/irq.h b/arch/cris/include/asm/irq.h new file mode 100644 index 000000000000..ce0fcf540d62 --- /dev/null +++ b/arch/cris/include/asm/irq.h @@ -0,0 +1,13 @@ +#ifndef _ASM_IRQ_H +#define _ASM_IRQ_H + +#include + +static inline int irq_canonicalize(int irq) +{ + return irq; +} + +#endif /* _ASM_IRQ_H */ + + diff --git a/arch/cris/include/asm/irq_regs.h b/arch/cris/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/cris/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/cris/include/asm/kdebug.h b/arch/cris/include/asm/kdebug.h new file mode 100644 index 000000000000..6ece1b037665 --- /dev/null +++ b/arch/cris/include/asm/kdebug.h @@ -0,0 +1 @@ +#include diff --git a/arch/cris/include/asm/kmap_types.h b/arch/cris/include/asm/kmap_types.h new file mode 100644 index 000000000000..492988cb9077 --- /dev/null +++ b/arch/cris/include/asm/kmap_types.h @@ -0,0 +1,25 @@ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +/* Dummy header just to define km_type. None of this + * is actually used on cris. + */ + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/arch/cris/include/asm/linkage.h b/arch/cris/include/asm/linkage.h new file mode 100644 index 000000000000..291c2d01c44f --- /dev/null +++ b/arch/cris/include/asm/linkage.h @@ -0,0 +1,6 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +/* Nothing to see here... */ + +#endif diff --git a/arch/cris/include/asm/local.h b/arch/cris/include/asm/local.h new file mode 100644 index 000000000000..c11c530f74d0 --- /dev/null +++ b/arch/cris/include/asm/local.h @@ -0,0 +1 @@ +#include diff --git a/arch/cris/include/asm/mman.h b/arch/cris/include/asm/mman.h new file mode 100644 index 000000000000..1c35e1b66b46 --- /dev/null +++ b/arch/cris/include/asm/mman.h @@ -0,0 +1,19 @@ +#ifndef __CRIS_MMAN_H__ +#define __CRIS_MMAN_H__ + +/* verbatim copy of asm-i386/ version */ + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __CRIS_MMAN_H__ */ diff --git a/arch/cris/include/asm/mmu.h b/arch/cris/include/asm/mmu.h new file mode 100644 index 000000000000..e06ea94ecffd --- /dev/null +++ b/arch/cris/include/asm/mmu.h @@ -0,0 +1,10 @@ +/* + * CRIS MMU constants and PTE layout + */ + +#ifndef _CRIS_MMU_H +#define _CRIS_MMU_H + +#include + +#endif diff --git a/arch/cris/include/asm/mmu_context.h b/arch/cris/include/asm/mmu_context.h new file mode 100644 index 000000000000..72ba08dcfd18 --- /dev/null +++ b/arch/cris/include/asm/mmu_context.h @@ -0,0 +1,26 @@ +#ifndef __CRIS_MMU_CONTEXT_H +#define __CRIS_MMU_CONTEXT_H + +#include + +extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); +extern void get_mmu_context(struct mm_struct *mm); +extern void destroy_context(struct mm_struct *mm); +extern void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk); + +#define deactivate_mm(tsk,mm) do { } while (0) + +#define activate_mm(prev,next) switch_mm((prev),(next),NULL) + +/* current active pgd - this is similar to other processors pgd + * registers like cr3 on the i386 + */ + +extern volatile DEFINE_PER_CPU(pgd_t *,current_pgd); /* defined in arch/cris/mm/fault.c */ + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +#endif diff --git a/arch/cris/include/asm/module.h b/arch/cris/include/asm/module.h new file mode 100644 index 000000000000..7ee72311bd78 --- /dev/null +++ b/arch/cris/include/asm/module.h @@ -0,0 +1,9 @@ +#ifndef _ASM_CRIS_MODULE_H +#define _ASM_CRIS_MODULE_H +/* cris is simple */ +struct mod_arch_specific { }; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr +#endif /* _ASM_CRIS_MODULE_H */ diff --git a/arch/cris/include/asm/msgbuf.h b/arch/cris/include/asm/msgbuf.h new file mode 100644 index 000000000000..ada63df1d574 --- /dev/null +++ b/arch/cris/include/asm/msgbuf.h @@ -0,0 +1,33 @@ +#ifndef _CRIS_MSGBUF_H +#define _CRIS_MSGBUF_H + +/* verbatim copy of asm-i386 version */ + +/* + * The msqid64_ds structure for CRIS architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _CRIS_MSGBUF_H */ diff --git a/arch/cris/include/asm/mutex.h b/arch/cris/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/cris/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/cris/include/asm/page.h b/arch/cris/include/asm/page.h new file mode 100644 index 000000000000..f3fdbd09c34c --- /dev/null +++ b/arch/cris/include/asm/page.h @@ -0,0 +1,74 @@ +#ifndef _CRIS_PAGE_H +#define _CRIS_PAGE_H + +#include +#include + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 13 +#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ + alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) +#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ +#ifndef __ASSEMBLY__ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; +#endif + +#define pte_val(x) ((x).pte) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +/* On CRIS the PFN numbers doesn't start at 0 so we have to compensate */ +/* for that before indexing into the page table starting at mem_map */ +#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) +#define pfn_valid(pfn) (((pfn) - (PAGE_OFFSET >> PAGE_SHIFT)) < max_mapnr) + +/* to index into the page map. our pages all start at physical addr PAGE_OFFSET so + * we can let the map start there. notice that we subtract PAGE_OFFSET because + * we start our mem_map there - in other ports they map mem_map physically and + * use __pa instead. in our system both the physical and virtual address of DRAM + * is too high to let mem_map start at 0, so we do it this way instead (similar + * to arm and m68k I think) + */ + +#define virt_to_page(kaddr) (mem_map + (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT)) +#define VALID_PAGE(page) (((page) - mem_map) < max_mapnr) +#define virt_addr_valid(kaddr) pfn_valid((unsigned)(kaddr) >> PAGE_SHIFT) + +/* convert a page (based on mem_map and forward) to a physical address + * do this by figuring out the virtual address and then use __pa + */ + +#define page_to_phys(page) __pa((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) + +#ifndef __ASSEMBLY__ + +#endif /* __ASSEMBLY__ */ + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include +#include + +#endif /* _CRIS_PAGE_H */ + diff --git a/arch/cris/include/asm/param.h b/arch/cris/include/asm/param.h new file mode 100644 index 000000000000..0e47994e40be --- /dev/null +++ b/arch/cris/include/asm/param.h @@ -0,0 +1,23 @@ +#ifndef _ASMCRIS_PARAM_H +#define _ASMCRIS_PARAM_H + +/* Currently we assume that HZ=100 is good for CRIS. */ +#ifdef __KERNEL__ +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 8192 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif diff --git a/arch/cris/include/asm/pci.h b/arch/cris/include/asm/pci.h new file mode 100644 index 000000000000..730ce40fdd0f --- /dev/null +++ b/arch/cris/include/asm/pci.h @@ -0,0 +1,68 @@ +#ifndef __ASM_CRIS_PCI_H +#define __ASM_CRIS_PCI_H + + +#ifdef __KERNEL__ +#include /* for struct page */ + +/* Can be used to override the logic in pci_scan_bus for skipping + already-configured bus numbers - to be used for buggy BIOSes + or architectures with incomplete PCI setup by the loader */ + +#define pcibios_assign_all_busses(void) 1 + +extern unsigned long pci_mem_start; +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0x10000000 + +#define PCIBIOS_MIN_CARDBUS_IO 0x4000 + +void pcibios_config_init(void); +struct pci_bus * pcibios_scan_root(int bus); +int pcibios_assign_resources(void); + +void pcibios_set_master(struct pci_dev *dev); +void pcibios_penalize_isa_irq(int irq); +struct irq_routing_table *pcibios_get_irq_routing_table(void); +int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq); + +/* Dynamic DMA mapping stuff. + * i386 has everything mapped statically. + */ + +#include +#include +#include +#include +#include + +struct pci_dev; + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +#define HAVE_PCI_MMAP +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + + +#endif /* __KERNEL__ */ + +/* implement the pci_ DMA API in terms of the generic device dma_ one */ +#include + +/* generic pci stuff */ +#include + +#endif /* __ASM_CRIS_PCI_H */ diff --git a/arch/cris/include/asm/percpu.h b/arch/cris/include/asm/percpu.h new file mode 100644 index 000000000000..6db9b43cf80a --- /dev/null +++ b/arch/cris/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef _CRIS_PERCPU_H +#define _CRIS_PERCPU_H + +#include + +#endif /* _CRIS_PERCPU_H */ diff --git a/arch/cris/include/asm/pgalloc.h b/arch/cris/include/asm/pgalloc.h new file mode 100644 index 000000000000..a1ba761d0573 --- /dev/null +++ b/arch/cris/include/asm/pgalloc.h @@ -0,0 +1,58 @@ +#ifndef _CRIS_PGALLOC_H +#define _CRIS_PGALLOC_H + +#include +#include + +#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, pte) +#define pmd_populate(mm, pmd, pte) pmd_set(pmd, page_address(pte)) +#define pmd_pgtable(pmd) pmd_page(pmd) + +/* + * Allocate and free page tables. + */ + +static inline pgd_t *pgd_alloc (struct mm_struct *mm) +{ + return (pgd_t *)get_zeroed_page(GFP_KERNEL); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + free_page((unsigned long)pgd); +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) +{ + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + return pte; +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) +{ + struct page *pte; + pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); + pgtable_page_ctor(pte); + return pte; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long)pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + __free_page(pte); +} + +#define __pte_free_tlb(tlb,pte) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb), pte); \ +} while (0) + +#define check_pgt_cache() do { } while (0) + +#endif diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h new file mode 100644 index 000000000000..50aa974aa834 --- /dev/null +++ b/arch/cris/include/asm/pgtable.h @@ -0,0 +1,299 @@ +/* + * CRIS pgtable.h - macros and functions to manipulate page tables. + */ + +#ifndef _CRIS_PGTABLE_H +#define _CRIS_PGTABLE_H + +#include +#include + +#ifndef __ASSEMBLY__ +#include +#include +#endif +#include + +/* + * The Linux memory management assumes a three-level page table setup. On + * CRIS, we use that, but "fold" the mid level into the top-level page + * table. Since the MMU TLB is software loaded through an interrupt, it + * supports any page table structure, so we could have used a three-level + * setup, but for the amounts of memory we normally use, a two-level is + * probably more efficient. + * + * This file contains the functions and defines necessary to modify and use + * the CRIS page table tree. + */ +#ifndef __ASSEMBLY__ +extern void paging_init(void); +#endif + +/* Certain architectures need to do special things when pte's + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval)) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) +#define set_pgu(pudptr, pudval) (*(pudptr) = pudval) + +/* PGDIR_SHIFT determines the size of the area a second-level page table can + * map. It is equal to the page size times the number of PTE's that fit in + * a PMD page. A PTE is 4-bytes in CRIS. Hence the following number. + */ + +#define PGDIR_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-2)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * entries per page directory level: we use a two-level, so + * we don't really have any PMD directory physically. + * pointers are 4 bytes so we can use the page size and + * divide it by 4 (shift by 2). + */ +#define PTRS_PER_PTE (1UL << (PAGE_SHIFT-2)) +#define PTRS_PER_PGD (1UL << (PAGE_SHIFT-2)) + +/* calculate how many PGD entries a user-level program can use + * the first mappable virtual address is 0 + * (TASK_SIZE is the maximum virtual address space) + */ + +#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +/* zero page used for uninitialized stuff */ +#ifndef __ASSEMBLY__ +extern unsigned long empty_zero_page; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) +#endif + +/* number of bits that fit into a memory pointer */ +#define BITS_PER_PTR (8*sizeof(unsigned long)) + +/* to align the pointer to a pointer address */ +#define PTR_MASK (~(sizeof(void*)-1)) + +/* sizeof(void*)==1<>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK) + +/* to set the page-dir */ +#define SET_PAGE_DIR(tsk,pgdir) + +#define pte_none(x) (!pte_val(x)) +#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) +#define pte_clear(mm,addr,xp) do { pte_val(*(xp)) = 0; } while (0) + +#define pmd_none(x) (!pmd_val(x)) +/* by removing the _PAGE_KERNEL bit from the comparision, the same pmd_bad + * works for both _PAGE_TABLE and _KERNPG_TABLE pmd entries. + */ +#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_KERNEL)) != _PAGE_TABLE) +#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) +#define pmd_clear(xp) do { pmd_val(*(xp)) = 0; } while (0) + +#ifndef __ASSEMBLY__ + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ + +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_MODIFIED; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } +static inline int pte_special(pte_t pte) { return 0; } + +static inline pte_t pte_wrprotect(pte_t pte) +{ + pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE); + return pte; +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + pte_val(pte) &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE); + return pte; +} + +static inline pte_t pte_mkold(pte_t pte) +{ + pte_val(pte) &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ); + return pte; +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte_val(pte) |= _PAGE_WRITE; + if (pte_val(pte) & _PAGE_MODIFIED) + pte_val(pte) |= _PAGE_SILENT_WRITE; + return pte; +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + pte_val(pte) |= _PAGE_MODIFIED; + if (pte_val(pte) & _PAGE_WRITE) + pte_val(pte) |= _PAGE_SILENT_WRITE; + return pte; +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + pte_val(pte) |= _PAGE_ACCESSED; + if (pte_val(pte) & _PAGE_READ) + { + pte_val(pte) |= _PAGE_SILENT_READ; + if ((pte_val(pte) & (_PAGE_WRITE | _PAGE_MODIFIED)) == + (_PAGE_WRITE | _PAGE_MODIFIED)) + pte_val(pte) |= _PAGE_SILENT_WRITE; + } + return pte; +} +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ + +/* What actually goes as arguments to the various functions is less than + * obvious, but a rule of thumb is that struct page's goes as struct page *, + * really physical DRAM addresses are unsigned long's, and DRAM "virtual" + * addresses (the 0xc0xxxxxx's) goes as void *'s. + */ + +static inline pte_t __mk_pte(void * page, pgprot_t pgprot) +{ + pte_t pte; + /* the PTE needs a physical address */ + pte_val(pte) = __pa(page) | pgprot_val(pgprot); + return pte; +} + +#define mk_pte(page, pgprot) __mk_pte(page_address(page), (pgprot)) + +#define mk_pte_phys(physpage, pgprot) \ +({ \ + pte_t __pte; \ + \ + pte_val(__pte) = (physpage) + pgprot_val(pgprot); \ + __pte; \ +}) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; } + + +/* pte_val refers to a page in the 0x4xxxxxxx physical DRAM interval + * __pte_page(pte_val) refers to the "virtual" DRAM interval + * pte_pagenr refers to the page-number counted starting from the virtual DRAM start + */ + +static inline unsigned long __pte_page(pte_t pte) +{ + /* the PTE contains a physical address */ + return (unsigned long)__va(pte_val(pte) & PAGE_MASK); +} + +#define pte_pagenr(pte) ((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT) + +/* permanent address of a page */ + +#define __page_address(page) (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT)) +#define pte_page(pte) (mem_map+pte_pagenr(pte)) + +/* only the pte's themselves need to point to physical DRAM (see above) + * the pagetable links are purely handled within the kernel SW and thus + * don't need the __pa and __va transformations. + */ + +static inline void pmd_set(pmd_t * pmdp, pte_t * ptep) +{ pmd_val(*pmdp) = _PAGE_TABLE | (unsigned long) ptep; } + +#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) +#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) + +/* to find an entry in a page-table-directory */ +static inline pgd_t * pgd_offset(const struct mm_struct *mm, unsigned long address) +{ + return mm->pgd + pgd_index(address); +} + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* Find an entry in the third-level page table.. */ +#define __pte_offset(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) +#define pte_offset_map(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) +#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) + +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) +#define pte_pfn(x) ((unsigned long)(__va((x).pte)) >> PAGE_SHIFT) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %p(%08lx).\n", __FILE__, __LINE__, &(e), pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %p(%08lx).\n", __FILE__, __LINE__, &(e), pgd_val(e)) + + +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* defined in head.S */ + +/* + * CRIS doesn't have any external MMU info: the kernel page + * tables contain all the necessary information. + * + * Actually I am not sure on what this could be used for. + */ +static inline void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte) +{ +} + +/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */ +/* Since the PAGE_PRESENT bit is bit 4, we can use the bits above */ + +#define __swp_type(x) (((x).val >> 5) & 0x7f) +#define __swp_offset(x) ((x).val >> 12) +#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 5) | ((offset) << 12) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#define kern_addr_valid(addr) (1) + +#include + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#define pte_to_pgoff(x) (pte_val(x) >> 6) +#define pgoff_to_pte(x) __pte(((x) << 6) | _PAGE_FILE) + +typedef pte_t *pte_addr_t; + +#endif /* __ASSEMBLY__ */ +#endif /* _CRIS_PGTABLE_H */ diff --git a/arch/cris/include/asm/poll.h b/arch/cris/include/asm/poll.h new file mode 100644 index 000000000000..c98509d3149e --- /dev/null +++ b/arch/cris/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/cris/include/asm/posix_types.h b/arch/cris/include/asm/posix_types.h new file mode 100644 index 000000000000..ce3fb25a460b --- /dev/null +++ b/arch/cris/include/asm/posix_types.h @@ -0,0 +1,66 @@ +/* $Id: posix_types.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $ */ + +/* We cheat a bit and use our C-coded bitops functions from asm/bitops.h */ +/* I guess we should write these in assembler because they are used often. */ + +#ifndef __ARCH_CRIS_POSIX_TYPES_H +#define __ARCH_CRIS_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef __SIZE_TYPE__ __kernel_size_t; +typedef long __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#ifdef __KERNEL__ + +#undef __FD_SET +#define __FD_SET(fd,fdsetp) set_bit(fd, (void *)(fdsetp)) + +#undef __FD_CLR +#define __FD_CLR(fd,fdsetp) clear_bit(fd, (void *)(fdsetp)) + +#undef __FD_ISSET +#define __FD_ISSET(fd,fdsetp) test_bit(fd, (void *)(fdsetp)) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) memset((void *)(fdsetp), 0, __FDSET_LONGS << 2) + +#endif /* __KERNEL__ */ + +#endif /* __ARCH_CRIS_POSIX_TYPES_H */ diff --git a/arch/cris/include/asm/processor.h b/arch/cris/include/asm/processor.h new file mode 100644 index 000000000000..3f7248f7a1c9 --- /dev/null +++ b/arch/cris/include/asm/processor.h @@ -0,0 +1,75 @@ +/* + * include/asm-cris/processor.h + * + * Copyright (C) 2000, 2001 Axis Communications AB + * + * Authors: Bjorn Wesen Initial version + * + */ + +#ifndef __ASM_CRIS_PROCESSOR_H +#define __ASM_CRIS_PROCESSOR_H + +#include +#include +#include +#include + +struct task_struct; + +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3)) + +/* THREAD_SIZE is the size of the task_struct/kernel_stack combo. + * normally, the stack is found by doing something like p + THREAD_SIZE + * in CRIS, a page is 8192 bytes, which seems like a sane size + */ + +#define THREAD_SIZE PAGE_SIZE +#define KERNEL_STACK_SIZE PAGE_SIZE + +/* + * At user->kernel entry, the pt_regs struct is stacked on the top of the kernel-stack. + * This macro allows us to find those regs for a task. + * Notice that subsequent pt_regs stackings, like recursive interrupts occurring while + * we're in the kernel, won't affect this - only the first user->kernel transition + * registers are reached by this. + */ + +#define user_regs(thread_info) (((struct pt_regs *)((unsigned long)(thread_info) + THREAD_SIZE)) - 1) + +/* + * Dito but for the currently running task + */ + +#define task_pt_regs(task) user_regs(task_thread_info(task)) +#define current_regs() task_pt_regs(current) + +static inline void prepare_to_copy(struct task_struct *tsk) +{ +} + +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) + +extern unsigned long thread_saved_pc(struct task_struct *tsk); + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ + /* Nothing needs to be done. */ +} + +#define init_stack (init_thread_union.stack) + +#define cpu_relax() barrier() + +#endif /* __ASM_CRIS_PROCESSOR_H */ diff --git a/arch/cris/include/asm/ptrace.h b/arch/cris/include/asm/ptrace.h new file mode 100644 index 000000000000..6618893bfe8e --- /dev/null +++ b/arch/cris/include/asm/ptrace.h @@ -0,0 +1,16 @@ +#ifndef _CRIS_PTRACE_H +#define _CRIS_PTRACE_H + +#include + +#ifdef __KERNEL__ + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 + +#define profile_pc(regs) instruction_pointer(regs) + +#endif /* __KERNEL__ */ + +#endif /* _CRIS_PTRACE_H */ diff --git a/arch/cris/include/asm/resource.h b/arch/cris/include/asm/resource.h new file mode 100644 index 000000000000..b5d29448de4e --- /dev/null +++ b/arch/cris/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef _CRIS_RESOURCE_H +#define _CRIS_RESOURCE_H + +#include + +#endif diff --git a/arch/cris/include/asm/rs485.h b/arch/cris/include/asm/rs485.h new file mode 100644 index 000000000000..c331c51b0c2b --- /dev/null +++ b/arch/cris/include/asm/rs485.h @@ -0,0 +1,20 @@ +/* RS-485 structures */ + +/* RS-485 support */ +/* Used with ioctl() TIOCSERSETRS485 */ +struct rs485_control { + unsigned short rts_on_send; + unsigned short rts_after_sent; + unsigned long delay_rts_before_send; + unsigned short enabled; +#ifdef __KERNEL__ + int disable_serial_loopback; +#endif +}; + +/* Used with ioctl() TIOCSERWRRS485 */ +struct rs485_write { + unsigned short outc_size; + unsigned char *outc; +}; + diff --git a/arch/cris/include/asm/rtc.h b/arch/cris/include/asm/rtc.h new file mode 100644 index 000000000000..17d3019529e1 --- /dev/null +++ b/arch/cris/include/asm/rtc.h @@ -0,0 +1,107 @@ + +#ifndef __RTC_H__ +#define __RTC_H__ + +#ifdef CONFIG_ETRAX_DS1302 + /* Dallas DS1302 clock/calendar register numbers. */ +# define RTC_SECONDS 0 +# define RTC_MINUTES 1 +# define RTC_HOURS 2 +# define RTC_DAY_OF_MONTH 3 +# define RTC_MONTH 4 +# define RTC_WEEKDAY 5 +# define RTC_YEAR 6 +# define RTC_CONTROL 7 + + /* Bits in CONTROL register. */ +# define RTC_CONTROL_WRITEPROTECT 0x80 +# define RTC_TRICKLECHARGER 8 + + /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */ +# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */ +# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */ +# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */ +# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */ +# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */ +# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */ +# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */ + +#elif defined(CONFIG_ETRAX_PCF8563) + /* I2C bus slave registers. */ +# define RTC_I2C_READ 0xa3 +# define RTC_I2C_WRITE 0xa2 + + /* Phillips PCF8563 registers. */ +# define RTC_CONTROL1 0x00 /* Control/Status register 1. */ +# define RTC_CONTROL2 0x01 /* Control/Status register 2. */ +# define RTC_CLOCKOUT_FREQ 0x0d /* CLKOUT frequency. */ +# define RTC_TIMER_CONTROL 0x0e /* Timer control. */ +# define RTC_TIMER_CNTDOWN 0x0f /* Timer countdown. */ + + /* BCD encoded clock registers. */ +# define RTC_SECONDS 0x02 +# define RTC_MINUTES 0x03 +# define RTC_HOURS 0x04 +# define RTC_DAY_OF_MONTH 0x05 +# define RTC_WEEKDAY 0x06 /* Not coded in BCD! */ +# define RTC_MONTH 0x07 +# define RTC_YEAR 0x08 +# define RTC_MINUTE_ALARM 0x09 +# define RTC_HOUR_ALARM 0x0a +# define RTC_DAY_ALARM 0x0b +# define RTC_WEEKDAY_ALARM 0x0c + +#endif + +#ifdef CONFIG_ETRAX_DS1302 +extern unsigned char ds1302_readreg(int reg); +extern void ds1302_writereg(int reg, unsigned char val); +extern int ds1302_init(void); +# define CMOS_READ(x) ds1302_readreg(x) +# define CMOS_WRITE(val,reg) ds1302_writereg(reg,val) +# define RTC_INIT() ds1302_init() +#elif defined(CONFIG_ETRAX_PCF8563) +extern unsigned char pcf8563_readreg(int reg); +extern void pcf8563_writereg(int reg, unsigned char val); +extern int pcf8563_init(void); +# define CMOS_READ(x) pcf8563_readreg(x) +# define CMOS_WRITE(val,reg) pcf8563_writereg(reg,val) +# define RTC_INIT() pcf8563_init() +#else + /* No RTC configured so we shouldn't try to access any. */ +# define CMOS_READ(x) 42 +# define CMOS_WRITE(x,y) +# define RTC_INIT() (-1) +#endif + +/* + * The struct used to pass data via the following ioctl. Similar to the + * struct tm in , but it needs to be here so that the kernel + * source is self contained, allowing cross-compiles, etc. etc. + */ +struct rtc_time { + int tm_sec; + int tm_min; + int tm_hour; + int tm_mday; + int tm_mon; + int tm_year; + int tm_wday; + int tm_yday; + int tm_isdst; +}; + +/* ioctl() calls that are permitted to the /dev/rtc interface. */ +#define RTC_MAGIC 'p' +/* Read RTC time. */ +#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) +/* Set RTC time. */ +#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) +#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int) +/* Voltage low detector */ +#define RTC_VL_READ _IOR(RTC_MAGIC, 0x13, int) +/* Clear voltage low information */ +#define RTC_VL_CLR _IO(RTC_MAGIC, 0x14) +#define RTC_MAX_IOCTL 0x14 + +#endif /* __RTC_H__ */ diff --git a/arch/cris/include/asm/scatterlist.h b/arch/cris/include/asm/scatterlist.h new file mode 100644 index 000000000000..faff53ad1f96 --- /dev/null +++ b/arch/cris/include/asm/scatterlist.h @@ -0,0 +1,23 @@ +#ifndef __ASM_CRIS_SCATTERLIST_H +#define __ASM_CRIS_SCATTERLIST_H + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + char * address; /* Location data is to be transferred to */ + unsigned int length; + + /* The following is i386 highmem junk - not used by us */ + unsigned long page_link; + unsigned int offset;/* for highmem, page offset */ + +}; + +#define sg_dma_address(sg) ((sg)->address) +#define sg_dma_len(sg) ((sg)->length) +/* i386 junk */ + +#define ISA_DMA_THRESHOLD (0x1fffffff) + +#endif /* !(__ASM_CRIS_SCATTERLIST_H) */ diff --git a/arch/cris/include/asm/sections.h b/arch/cris/include/asm/sections.h new file mode 100644 index 000000000000..2c998ce8967b --- /dev/null +++ b/arch/cris/include/asm/sections.h @@ -0,0 +1,7 @@ +#ifndef _CRIS_SECTIONS_H +#define _CRIS_SECTIONS_H + +/* nothing to see, move along */ +#include + +#endif diff --git a/arch/cris/include/asm/segment.h b/arch/cris/include/asm/segment.h new file mode 100644 index 000000000000..c067513beaaf --- /dev/null +++ b/arch/cris/include/asm/segment.h @@ -0,0 +1,8 @@ +#ifndef _ASM_SEGMENT_H +#define _ASM_SEGMENT_H + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#endif diff --git a/arch/cris/include/asm/sembuf.h b/arch/cris/include/asm/sembuf.h new file mode 100644 index 000000000000..7fed9843796d --- /dev/null +++ b/arch/cris/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _CRIS_SEMBUF_H +#define _CRIS_SEMBUF_H + +/* + * The semid64_ds structure for CRIS architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _CRIS_SEMBUF_H */ diff --git a/arch/cris/include/asm/setup.h b/arch/cris/include/asm/setup.h new file mode 100644 index 000000000000..b90728652d1a --- /dev/null +++ b/arch/cris/include/asm/setup.h @@ -0,0 +1,6 @@ +#ifndef _CRIS_SETUP_H +#define _CRIS_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +#endif diff --git a/arch/cris/include/asm/shmbuf.h b/arch/cris/include/asm/shmbuf.h new file mode 100644 index 000000000000..3239e3f000e8 --- /dev/null +++ b/arch/cris/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _CRIS_SHMBUF_H +#define _CRIS_SHMBUF_H + +/* + * The shmid64_ds structure for CRIS architecture (same as for i386) + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _CRIS_SHMBUF_H */ diff --git a/arch/cris/include/asm/shmparam.h b/arch/cris/include/asm/shmparam.h new file mode 100644 index 000000000000..d29d12270687 --- /dev/null +++ b/arch/cris/include/asm/shmparam.h @@ -0,0 +1,8 @@ +#ifndef _ASM_CRIS_SHMPARAM_H +#define _ASM_CRIS_SHMPARAM_H + +/* same as asm-i386/ version.. */ + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_CRIS_SHMPARAM_H */ diff --git a/arch/cris/include/asm/sigcontext.h b/arch/cris/include/asm/sigcontext.h new file mode 100644 index 000000000000..a1d634e120df --- /dev/null +++ b/arch/cris/include/asm/sigcontext.h @@ -0,0 +1,24 @@ +/* $Id: sigcontext.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $ */ + +#ifndef _ASM_CRIS_SIGCONTEXT_H +#define _ASM_CRIS_SIGCONTEXT_H + +#include + +/* This struct is saved by setup_frame in signal.c, to keep the current context while + a signal handler is executed. It's restored by sys_sigreturn. + + To keep things simple, we use pt_regs here even though normally you just specify + the list of regs to save. Then we can use copy_from_user on the entire regs instead + of a bunch of get_user's as well... + +*/ + +struct sigcontext { + struct pt_regs regs; /* needs to be first */ + unsigned long oldmask; + unsigned long usp; /* usp before stacking this gunk on it */ +}; + +#endif + diff --git a/arch/cris/include/asm/siginfo.h b/arch/cris/include/asm/siginfo.h new file mode 100644 index 000000000000..c1cd6d16928b --- /dev/null +++ b/arch/cris/include/asm/siginfo.h @@ -0,0 +1,6 @@ +#ifndef _CRIS_SIGINFO_H +#define _CRIS_SIGINFO_H + +#include + +#endif diff --git a/arch/cris/include/asm/signal.h b/arch/cris/include/asm/signal.h new file mode 100644 index 000000000000..349ae682b568 --- /dev/null +++ b/arch/cris/include/asm/signal.h @@ -0,0 +1,163 @@ +#ifndef _ASM_CRIS_SIGNAL_H +#define _ASM_CRIS_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ + +#define SA_NOCLDSTOP 0x00000001u +#define SA_NOCLDWAIT 0x00000002u +#define SA_SIGINFO 0x00000004u +#define SA_ONSTACK 0x08000000u +#define SA_RESTART 0x10000000u +#define SA_NODEFER 0x40000000u +#define SA_RESETHAND 0x80000000u + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include + +/* here we could define asm-optimized sigaddset, sigdelset etc. operations. + * if we don't, generic ones are used from linux/signal.h + */ +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/cris/include/asm/smp.h b/arch/cris/include/asm/smp.h new file mode 100644 index 000000000000..dba33aba3e95 --- /dev/null +++ b/arch/cris/include/asm/smp.h @@ -0,0 +1,11 @@ +#ifndef __ASM_SMP_H +#define __ASM_SMP_H + +#include + +extern cpumask_t phys_cpu_present_map; +extern cpumask_t cpu_possible_map; + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +#endif diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h new file mode 100644 index 000000000000..9df0ca82f5de --- /dev/null +++ b/arch/cris/include/asm/socket.h @@ -0,0 +1,61 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +/* almost the same as asm-i386/socket.h */ + +#include + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* _ASM_SOCKET_H */ + + diff --git a/arch/cris/include/asm/sockios.h b/arch/cris/include/asm/sockios.h new file mode 100644 index 000000000000..cfe7bfecf599 --- /dev/null +++ b/arch/cris/include/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ARCH_CRIS_SOCKIOS__ +#define __ARCH_CRIS_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif diff --git a/arch/cris/include/asm/spinlock.h b/arch/cris/include/asm/spinlock.h new file mode 100644 index 000000000000..ed816b57face --- /dev/null +++ b/arch/cris/include/asm/spinlock.h @@ -0,0 +1 @@ +#include diff --git a/arch/cris/include/asm/stat.h b/arch/cris/include/asm/stat.h new file mode 100644 index 000000000000..9e558cc3c43b --- /dev/null +++ b/arch/cris/include/asm/stat.h @@ -0,0 +1,81 @@ +#ifndef _CRIS_STAT_H +#define _CRIS_STAT_H + +/* Keep this a verbatim copy of i386 version; tweak CRIS-specific bits in + the kernel if necessary. */ + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +#define STAT_HAVE_NSEC 1 + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ + + unsigned long long st_ino; +}; + +#endif diff --git a/arch/cris/include/asm/statfs.h b/arch/cris/include/asm/statfs.h new file mode 100644 index 000000000000..fdaf921844bc --- /dev/null +++ b/arch/cris/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef _CRIS_STATFS_H +#define _CRIS_STATFS_H + +#include + +#endif diff --git a/arch/cris/include/asm/string.h b/arch/cris/include/asm/string.h new file mode 100644 index 000000000000..691190e99a27 --- /dev/null +++ b/arch/cris/include/asm/string.h @@ -0,0 +1,14 @@ +#ifndef _ASM_CRIS_STRING_H +#define _ASM_CRIS_STRING_H + +/* the optimized memcpy is in arch/cris/lib/string.c */ + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *, const void *, size_t); + +/* New and improved. In arch/cris/lib/memset.c */ + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *, int, size_t); + +#endif diff --git a/arch/cris/include/asm/sync_serial.h b/arch/cris/include/asm/sync_serial.h new file mode 100644 index 000000000000..d87c24df2b38 --- /dev/null +++ b/arch/cris/include/asm/sync_serial.h @@ -0,0 +1,107 @@ +/* + * ioctl defines for synchronous serial port driver + * + * Copyright (c) 2001-2003 Axis Communications AB + * + * Author: Mikael Starvik + * + */ + +#ifndef SYNC_SERIAL_H +#define SYNC_SERIAL_H + +#include + +#define SSP_SPEED _IOR('S', 0, unsigned int) +#define SSP_MODE _IOR('S', 1, unsigned int) +#define SSP_FRAME_SYNC _IOR('S', 2, unsigned int) +#define SSP_IPOLARITY _IOR('S', 3, unsigned int) +#define SSP_OPOLARITY _IOR('S', 4, unsigned int) +#define SSP_SPI _IOR('S', 5, unsigned int) +#define SSP_INBUFCHUNK _IOR('S', 6, unsigned int) + +/* Values for SSP_SPEED */ +#define SSP150 0 +#define SSP300 1 +#define SSP600 2 +#define SSP1200 3 +#define SSP2400 4 +#define SSP4800 5 +#define SSP9600 6 +#define SSP19200 7 +#define SSP28800 8 +#define SSP57600 9 +#define SSP115200 10 +#define SSP230400 11 +#define SSP460800 12 +#define SSP921600 13 +#define SSP3125000 14 +#define CODEC 15 + +#define FREQ_4MHz 0 +#define FREQ_2MHz 1 +#define FREQ_1MHz 2 +#define FREQ_512kHz 3 +#define FREQ_256kHz 4 +#define FREQ_128kHz 5 +#define FREQ_64kHz 6 +#define FREQ_32kHz 7 + +/* Used by application to set CODEC divider, word rate and frame rate */ +#define CODEC_VAL(freq, clk_per_sync, sync_per_frame) (CODEC | (freq << 8) | (clk_per_sync << 16) | (sync_per_frame << 28)) + +/* Used by driver to extract speed */ +#define GET_SPEED(x) (x & 0xff) +#define GET_FREQ(x) ((x & 0xff00) >> 8) +#define GET_WORD_RATE(x) (((x & 0x0fff0000) >> 16) - 1) +#define GET_FRAME_RATE(x) (((x & 0xf0000000) >> 28) - 1) + +/* Values for SSP_MODE */ +#define MASTER_OUTPUT 0 +#define SLAVE_OUTPUT 1 +#define MASTER_INPUT 2 +#define SLAVE_INPUT 3 +#define MASTER_BIDIR 4 +#define SLAVE_BIDIR 5 + +/* Values for SSP_FRAME_SYNC */ +#define NORMAL_SYNC 1 +#define EARLY_SYNC 2 +#define SECOND_WORD_SYNC 0x40000 + +#define BIT_SYNC 4 +#define WORD_SYNC 8 +#define EXTENDED_SYNC 0x10 + +#define SYNC_OFF 0x20 +#define SYNC_ON 0x40 +#define WORD_SIZE_8 0x80 +#define WORD_SIZE_12 0x100 +#define WORD_SIZE_16 0x200 +#define WORD_SIZE_24 0x400 +#define WORD_SIZE_32 0x800 +#define BIT_ORDER_LSB 0x1000 +#define BIT_ORDER_MSB 0x2000 +#define FLOW_CONTROL_ENABLE 0x4000 +#define FLOW_CONTROL_DISABLE 0x8000 +#define CLOCK_GATED 0x10000 +#define CLOCK_NOT_GATED 0x20000 + +/* Values for SSP_IPOLARITY and SSP_OPOLARITY */ +#define CLOCK_NORMAL 1 +#define CLOCK_INVERT 2 +#define CLOCK_INEGEDGE CLOCK_NORMAL +#define CLOCK_IPOSEDGE CLOCK_INVERT +#define FRAME_NORMAL 4 +#define FRAME_INVERT 8 +#define STATUS_NORMAL 0x10 +#define STATUS_INVERT 0x20 + +/* Values for SSP_SPI */ +#define SPI_MASTER 0 +#define SPI_SLAVE 1 + +/* Values for SSP_INBUFCHUNK */ +/* plain integer with the size of DMA chunks */ + +#endif diff --git a/arch/cris/include/asm/system.h b/arch/cris/include/asm/system.h new file mode 100644 index 000000000000..8657b084a922 --- /dev/null +++ b/arch/cris/include/asm/system.h @@ -0,0 +1,88 @@ +#ifndef __ASM_CRIS_SYSTEM_H +#define __ASM_CRIS_SYSTEM_H + +#include + +/* the switch_to macro calls resume, an asm function in entry.S which does the actual + * task switching. + */ + +extern struct task_struct *resume(struct task_struct *prev, struct task_struct *next, int); +#define switch_to(prev,next,last) last = resume(prev,next, \ + (int)&((struct task_struct *)0)->thread) + +#define barrier() __asm__ __volatile__("": : :"memory") +#define mb() barrier() +#define rmb() mb() +#define wmb() mb() +#define read_barrier_depends() do { } while(0) +#define set_mb(var, value) do { var = value; mb(); } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define iret() + +/* + * disable hlt during certain critical i/o operations + */ +#define HAVE_DISABLE_HLT +void disable_hlt(void); +void enable_hlt(void); + +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + /* since Etrax doesn't have any atomic xchg instructions, we need to disable + irq's (if enabled) and do it with move.d's */ + unsigned long flags,temp; + local_irq_save(flags); /* save flags, including irq enable bit and shut off irqs */ + switch (size) { + case 1: + *((unsigned char *)&temp) = x; + x = *(unsigned char *)ptr; + *(unsigned char *)ptr = *((unsigned char *)&temp); + break; + case 2: + *((unsigned short *)&temp) = x; + x = *(unsigned short *)ptr; + *(unsigned short *)ptr = *((unsigned short *)&temp); + break; + case 4: + temp = x; + x = *(unsigned long *)ptr; + *(unsigned long *)ptr = temp; + break; + } + local_irq_restore(flags); /* restore irq enable bit */ + return x; +} + +#include + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#ifndef CONFIG_SMP +#include +#endif + +#define arch_align_stack(x) (x) + +void default_idle(void); + +#endif diff --git a/arch/cris/include/asm/termbits.h b/arch/cris/include/asm/termbits.h new file mode 100644 index 000000000000..66e1a7492a0c --- /dev/null +++ b/arch/cris/include/asm/termbits.h @@ -0,0 +1,234 @@ +/* $Id: termbits.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $ */ + +#ifndef __ARCH_ETRAX100_TERMBITS_H__ +#define __ARCH_ETRAX100_TERMBITS_H__ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +/* + * 3 2 1 + * 10 987 654 321 098 765 432 109 876 543 210 + * | | ||| CBAUD + * obaud + * + * ||CSIZE + * + * |CSTOP + * |CREAD + * |CPARENB + * + * |CPARODD + * |HUPCL + * |CLOCAL + * |CBAUDEX + * 10 987 654 321 098 765 432 109 876 543 210 + * | || || CIBAUD, IBSHIFT=16 + * ibaud + * |CMSPAR + * | CRTSCTS + * x x xxx xxx x x xx Free bits + */ + +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 + +/* Unsupported rates, but needed to avoid compile error. */ +#define B500000 0010005 +#define B576000 0010006 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 + +/* etrax supports these additional three baud rates */ +#define B921600 0010005 +#define B1843200 0010006 +#define B6250000 0010007 +/* ETRAX FS supports this as well */ +#define B12500000 0010010 +#define CIBAUD 002003600000 /* input baud rate (used in v32) */ +/* The values for CIBAUD bits are the same as the values for CBAUD and CBAUDEX + * shifted left IBSHIFT bits. + */ +#define IBSHIFT 16 +#define CMSPAR 010000000000 /* mark or space (stick) parity - PARODD=space*/ +#define CRTSCTS 020000000000 /* flow control */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif diff --git a/arch/cris/include/asm/termios.h b/arch/cris/include/asm/termios.h new file mode 100644 index 000000000000..b0124e6c2e41 --- /dev/null +++ b/arch/cris/include/asm/termios.h @@ -0,0 +1,91 @@ +#ifndef _CRIS_TERMIOS_H +#define _CRIS_TERMIOS_H + +#include +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* _CRIS_TERMIOS_H */ diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h new file mode 100644 index 000000000000..bc5b2935ca53 --- /dev/null +++ b/arch/cris/include/asm/thread_info.h @@ -0,0 +1,106 @@ +/* thread_info.h: CRIS low-level thread information + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + * + * CRIS port by Axis Communications + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +#ifndef __ASSEMBLY__ +#include +#include +#include +#include +#endif + + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants must also be changed + */ +#ifndef __ASSEMBLY__ +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + __u32 tls; /* TLS for this thread */ + + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF for user-thead + 0-0xFFFFFFFF for kernel-thread + */ + struct restart_block restart_block; + __u8 supervisor_stack[0]; +}; + +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) + +/* thread information allocation */ +#define alloc_thread_info(tsk) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1)) +#define free_thread_info(ti) free_pages((unsigned long) (ti), 1) + +#endif /* !__ASSEMBLY__ */ + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ +#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 17 +#define TIF_FREEZE 18 /* is freezing for suspend */ + +#define _TIF_SYSCALL_TRACE (1< + +/* + * We don't have a cycle-counter.. but we do not support SMP anyway where this is + * used so it does not matter. + */ + +typedef unsigned long long cycles_t; + +static inline cycles_t get_cycles(void) +{ + return 0; +} + +#endif diff --git a/arch/cris/include/asm/tlb.h b/arch/cris/include/asm/tlb.h new file mode 100644 index 000000000000..77384ea2f29d --- /dev/null +++ b/arch/cris/include/asm/tlb.h @@ -0,0 +1,19 @@ +#ifndef _CRIS_TLB_H +#define _CRIS_TLB_H + +#include + +#include + +/* + * cris doesn't need any special per-pte or + * per-vma handling.. + */ +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) +#include + +#endif diff --git a/arch/cris/include/asm/tlbflush.h b/arch/cris/include/asm/tlbflush.h new file mode 100644 index 000000000000..20697e7ef4f2 --- /dev/null +++ b/arch/cris/include/asm/tlbflush.h @@ -0,0 +1,48 @@ +#ifndef _CRIS_TLBFLUSH_H +#define _CRIS_TLBFLUSH_H + +#include +#include +#include +#include + +/* + * TLB flushing (implemented in arch/cris/mm/tlb.c): + * + * - flush_tlb() flushes the current mm struct TLBs + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(mm, start, end) flushes a range of pages + * + */ + +extern void __flush_tlb_all(void); +extern void __flush_tlb_mm(struct mm_struct *mm); +extern void __flush_tlb_page(struct vm_area_struct *vma, + unsigned long addr); + +#ifdef CONFIG_SMP +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_page(struct vm_area_struct *vma, + unsigned long addr); +#else +#define flush_tlb_all __flush_tlb_all +#define flush_tlb_mm __flush_tlb_mm +#define flush_tlb_page __flush_tlb_page +#endif + +static inline void flush_tlb_range(struct vm_area_struct * vma, unsigned long start, unsigned long end) +{ + flush_tlb_mm(vma->vm_mm); +} + +static inline void flush_tlb(void) +{ + flush_tlb_mm(current->mm); +} + +#define flush_tlb_kernel_range(start, end) flush_tlb_all() + +#endif /* _CRIS_TLBFLUSH_H */ diff --git a/arch/cris/include/asm/topology.h b/arch/cris/include/asm/topology.h new file mode 100644 index 000000000000..2ac613d32a89 --- /dev/null +++ b/arch/cris/include/asm/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_CRIS_TOPOLOGY_H +#define _ASM_CRIS_TOPOLOGY_H + +#include + +#endif /* _ASM_CRIS_TOPOLOGY_H */ diff --git a/arch/cris/include/asm/types.h b/arch/cris/include/asm/types.h new file mode 100644 index 000000000000..5790262cbe8a --- /dev/null +++ b/arch/cris/include/asm/types.h @@ -0,0 +1,30 @@ +#ifndef _ETRAX_TYPES_H +#define _ETRAX_TYPES_H + +#include + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide, just like our other addresses. */ + +typedef u32 dma_addr_t; +typedef u32 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/cris/include/asm/uaccess.h b/arch/cris/include/asm/uaccess.h new file mode 100644 index 000000000000..914540801c5e --- /dev/null +++ b/arch/cris/include/asm/uaccess.h @@ -0,0 +1,404 @@ +/* + * Authors: Bjorn Wesen (bjornw@axis.com) + * Hans-Peter Nilsson (hp@axis.com) + */ + +/* Asm:s have been tweaked (within the domain of correctness) to give + satisfactory results for "gcc version 2.96 20000427 (experimental)". + + Check regularly... + + Register $r9 is chosen for temporaries, being a call-clobbered register + first in line to be used (notably for local blocks), not colliding with + parameter registers. */ + +#ifndef _CRIS_UACCESS_H +#define _CRIS_UACCESS_H + +#ifndef __ASSEMBLY__ +#include +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +/* addr_limit is the maximum accessible address for the task. we misuse + * the KERNEL_DS and USER_DS values to both assign and compare the + * addr_limit values through the equally misnamed get/set_fs macros. + * (see above) + */ + +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) +#define USER_DS MAKE_MM_SEG(TASK_SIZE) + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) +#define __user_ok(addr,size) (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size))) +#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size))) +#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size)) + +#include + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + * + * The "__xxx" versions of the user access functions are versions that + * do not verify the address space, that must have been done previously + * with a separate "access_ok()" call (this is used when we do multiple + * accesses to the same area of user memory). + * + * As we use the same address space for kernel and user data on + * CRIS, we can just do these as direct assignments. (Of course, the + * exception handling means that it's no longer "just"...) + */ +#define get_user(x,ptr) \ + __get_user_check((x),(ptr),sizeof(*(ptr))) +#define put_user(x,ptr) \ + __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) + +#define __get_user(x,ptr) \ + __get_user_nocheck((x),(ptr),sizeof(*(ptr))) +#define __put_user(x,ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) + +extern long __put_user_bad(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: __put_user_asm(x,ptr,retval,"move.b"); break; \ + case 2: __put_user_asm(x,ptr,retval,"move.w"); break; \ + case 4: __put_user_asm(x,ptr,retval,"move.d"); break; \ + case 8: __put_user_asm_64(x,ptr,retval); break; \ + default: __put_user_bad(); \ + } \ +} while (0) + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: __get_user_asm(x,ptr,retval,"move.b"); break; \ + case 2: __get_user_asm(x,ptr,retval,"move.w"); break; \ + case 4: __get_user_asm(x,ptr,retval,"move.d"); break; \ + case 8: __get_user_asm_64(x,ptr,retval); break; \ + default: (x) = __get_user_bad(); \ + } \ +} while (0) + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __put_user_size((x),(ptr),(size),__pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) *__pu_addr = (ptr); \ + if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ + __put_user_size((x),__pu_addr,(size),__pu_err); \ + __pu_err; \ +}) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct *)(x)) + + + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err, __gu_val; \ + __get_user_size(__gu_val,(ptr),(size),__gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err = -EFAULT, __gu_val = 0; \ + const __typeof__(*(ptr)) *__gu_addr = (ptr); \ + if (access_ok(VERIFY_READ,__gu_addr,size)) \ + __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +extern long __get_user_bad(void); + +/* More complex functions. Most are inline, but some call functions that + live in lib/usercopy.c */ + +extern unsigned long __copy_user(void __user *to, const void *from, unsigned long n); +extern unsigned long __copy_user_zeroing(void *to, const void __user *from, unsigned long n); +extern unsigned long __do_clear_user(void __user *to, unsigned long n); + +static inline unsigned long +__generic_copy_to_user(void __user *to, const void *from, unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + return __copy_user(to,from,n); + return n; +} + +static inline unsigned long +__generic_copy_from_user(void *to, const void __user *from, unsigned long n) +{ + if (access_ok(VERIFY_READ, from, n)) + return __copy_user_zeroing(to,from,n); + return n; +} + +static inline unsigned long +__generic_clear_user(void __user *to, unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + return __do_clear_user(to,n); + return n; +} + +static inline long +__strncpy_from_user(char *dst, const char __user *src, long count) +{ + return __do_strncpy_from_user(dst, src, count); +} + +static inline long +strncpy_from_user(char *dst, const char __user *src, long count) +{ + long res = -EFAULT; + if (access_ok(VERIFY_READ, src, 1)) + res = __do_strncpy_from_user(dst, src, count); + return res; +} + + +/* Note that these expand awfully if made into switch constructs, so + don't do that. */ + +static inline unsigned long +__constant_copy_from_user(void *to, const void __user *from, unsigned long n) +{ + unsigned long ret = 0; + if (n == 0) + ; + else if (n == 1) + __asm_copy_from_user_1(to, from, ret); + else if (n == 2) + __asm_copy_from_user_2(to, from, ret); + else if (n == 3) + __asm_copy_from_user_3(to, from, ret); + else if (n == 4) + __asm_copy_from_user_4(to, from, ret); + else if (n == 5) + __asm_copy_from_user_5(to, from, ret); + else if (n == 6) + __asm_copy_from_user_6(to, from, ret); + else if (n == 7) + __asm_copy_from_user_7(to, from, ret); + else if (n == 8) + __asm_copy_from_user_8(to, from, ret); + else if (n == 9) + __asm_copy_from_user_9(to, from, ret); + else if (n == 10) + __asm_copy_from_user_10(to, from, ret); + else if (n == 11) + __asm_copy_from_user_11(to, from, ret); + else if (n == 12) + __asm_copy_from_user_12(to, from, ret); + else if (n == 13) + __asm_copy_from_user_13(to, from, ret); + else if (n == 14) + __asm_copy_from_user_14(to, from, ret); + else if (n == 15) + __asm_copy_from_user_15(to, from, ret); + else if (n == 16) + __asm_copy_from_user_16(to, from, ret); + else if (n == 20) + __asm_copy_from_user_20(to, from, ret); + else if (n == 24) + __asm_copy_from_user_24(to, from, ret); + else + ret = __generic_copy_from_user(to, from, n); + + return ret; +} + +/* Ditto, don't make a switch out of this. */ + +static inline unsigned long +__constant_copy_to_user(void __user *to, const void *from, unsigned long n) +{ + unsigned long ret = 0; + if (n == 0) + ; + else if (n == 1) + __asm_copy_to_user_1(to, from, ret); + else if (n == 2) + __asm_copy_to_user_2(to, from, ret); + else if (n == 3) + __asm_copy_to_user_3(to, from, ret); + else if (n == 4) + __asm_copy_to_user_4(to, from, ret); + else if (n == 5) + __asm_copy_to_user_5(to, from, ret); + else if (n == 6) + __asm_copy_to_user_6(to, from, ret); + else if (n == 7) + __asm_copy_to_user_7(to, from, ret); + else if (n == 8) + __asm_copy_to_user_8(to, from, ret); + else if (n == 9) + __asm_copy_to_user_9(to, from, ret); + else if (n == 10) + __asm_copy_to_user_10(to, from, ret); + else if (n == 11) + __asm_copy_to_user_11(to, from, ret); + else if (n == 12) + __asm_copy_to_user_12(to, from, ret); + else if (n == 13) + __asm_copy_to_user_13(to, from, ret); + else if (n == 14) + __asm_copy_to_user_14(to, from, ret); + else if (n == 15) + __asm_copy_to_user_15(to, from, ret); + else if (n == 16) + __asm_copy_to_user_16(to, from, ret); + else if (n == 20) + __asm_copy_to_user_20(to, from, ret); + else if (n == 24) + __asm_copy_to_user_24(to, from, ret); + else + ret = __generic_copy_to_user(to, from, n); + + return ret; +} + +/* No switch, please. */ + +static inline unsigned long +__constant_clear_user(void __user *to, unsigned long n) +{ + unsigned long ret = 0; + if (n == 0) + ; + else if (n == 1) + __asm_clear_1(to, ret); + else if (n == 2) + __asm_clear_2(to, ret); + else if (n == 3) + __asm_clear_3(to, ret); + else if (n == 4) + __asm_clear_4(to, ret); + else if (n == 8) + __asm_clear_8(to, ret); + else if (n == 12) + __asm_clear_12(to, ret); + else if (n == 16) + __asm_clear_16(to, ret); + else if (n == 20) + __asm_clear_20(to, ret); + else if (n == 24) + __asm_clear_24(to, ret); + else + ret = __generic_clear_user(to, n); + + return ret; +} + + +#define clear_user(to, n) \ +(__builtin_constant_p(n) ? \ + __constant_clear_user(to, n) : \ + __generic_clear_user(to, n)) + +#define copy_from_user(to, from, n) \ +(__builtin_constant_p(n) ? \ + __constant_copy_from_user(to, from, n) : \ + __generic_copy_from_user(to, from, n)) + +#define copy_to_user(to, from, n) \ +(__builtin_constant_p(n) ? \ + __constant_copy_to_user(to, from, n) : \ + __generic_copy_to_user(to, from, n)) + +/* We let the __ versions of copy_from/to_user inline, because they're often + * used in fast paths and have only a small space overhead. + */ + +static inline unsigned long +__generic_copy_from_user_nocheck(void *to, const void __user *from, + unsigned long n) +{ + return __copy_user_zeroing(to,from,n); +} + +static inline unsigned long +__generic_copy_to_user_nocheck(void __user *to, const void *from, + unsigned long n) +{ + return __copy_user(to,from,n); +} + +static inline unsigned long +__generic_clear_user_nocheck(void __user *to, unsigned long n) +{ + return __do_clear_user(to,n); +} + +/* without checking */ + +#define __copy_to_user(to,from,n) __generic_copy_to_user_nocheck((to),(from),(n)) +#define __copy_from_user(to,from,n) __generic_copy_from_user_nocheck((to),(from),(n)) +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user +#define __clear_user(to,n) __generic_clear_user_nocheck((to),(n)) + +#define strlen_user(str) strnlen_user((str), 0x7ffffffe) + +#endif /* __ASSEMBLY__ */ + +#endif /* _CRIS_UACCESS_H */ diff --git a/arch/cris/include/asm/ucontext.h b/arch/cris/include/asm/ucontext.h new file mode 100644 index 000000000000..eed6ad5eb3f2 --- /dev/null +++ b/arch/cris/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef _ASM_CRIS_UCONTEXT_H +#define _ASM_CRIS_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* !_ASM_CRIS_UCONTEXT_H */ diff --git a/arch/cris/include/asm/unaligned.h b/arch/cris/include/asm/unaligned.h new file mode 100644 index 000000000000..7b3f3fec567c --- /dev/null +++ b/arch/cris/include/asm/unaligned.h @@ -0,0 +1,13 @@ +#ifndef _ASM_CRIS_UNALIGNED_H +#define _ASM_CRIS_UNALIGNED_H + +/* + * CRIS can do unaligned accesses itself. + */ +#include +#include + +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le + +#endif /* _ASM_CRIS_UNALIGNED_H */ diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h new file mode 100644 index 000000000000..235d076379d5 --- /dev/null +++ b/arch/cris/include/asm/unistd.h @@ -0,0 +1,374 @@ +#ifndef _ASM_CRIS_UNISTD_H_ +#define _ASM_CRIS_UNISTD_H_ + +/* + * This file contains the system call numbers, and stub macros for libc. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 + +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 +/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */ +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +/* #define __NR_sys_setaltroot 285 */ +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +#define __NR_timerfd_create 322 +#define __NR_eventfd 323 +#define __NR_fallocate 324 +#define __NR_timerfd_settime 325 +#define __NR_timerfd_gettime 326 + +#ifdef __KERNEL__ + +#define NR_syscalls 327 + +#include + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +#endif /* __KERNEL__ */ +#endif /* _ASM_CRIS_UNISTD_H_ */ diff --git a/arch/cris/include/asm/user.h b/arch/cris/include/asm/user.h new file mode 100644 index 000000000000..59147cf43cf6 --- /dev/null +++ b/arch/cris/include/asm/user.h @@ -0,0 +1,52 @@ +#ifndef __ASM_CRIS_USER_H +#define __ASM_CRIS_USER_H + +#include +#include +#include +#include + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd). The file contents are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ + +struct user { + struct user_regs_struct regs; /* entire machine state */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* __ASM_CRIS_USER_H */ diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c index 8b0b9348b574..f9ca44bdea20 100644 --- a/arch/cris/mm/ioremap.c +++ b/arch/cris/mm/ioremap.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include /* * Generic mapping function (not visible outside): diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index 65d0a9103297..7e8a63106bdf 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -32,14 +32,14 @@ #include #include -#include /* DMA and register descriptions */ +#include /* DMA and register descriptions */ #include /* CRIS_LED_* I/O functions */ #include #include #include #include #include -#include +#include //#define ETHDEBUG #define D(x) diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 211c21797ce0..8b2c619a09f2 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -34,14 +34,14 @@ static char *serial_version = "$Revision: 1.25 $"; #include #include -#include +#include /* non-arch dependent serial structures are in linux/serial.h */ #include /* while we keep our own stuff (struct e100_serial) in a local .h file */ #include "crisv10.h" #include -#include +#include #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER #ifndef CONFIG_ETRAX_FAST_TIMER diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h index e3c5c8c3c09b..f36a729280bc 100644 --- a/drivers/serial/crisv10.h +++ b/drivers/serial/crisv10.h @@ -10,7 +10,7 @@ #include #include #include -#include +#include /* Software state per channel */ diff --git a/include/asm-cris/Kbuild b/include/asm-cris/Kbuild deleted file mode 100644 index d5b631935ec8..000000000000 --- a/include/asm-cris/Kbuild +++ /dev/null @@ -1,11 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += arch-v10/ -header-y += arch-v32/ - -header-y += ethernet.h -header-y += rtc.h -header-y += sync_serial.h - -unifdef-y += etraxgpio.h -unifdef-y += rs485.h diff --git a/include/asm-cris/arch-v10/Kbuild b/include/asm-cris/arch-v10/Kbuild deleted file mode 100644 index 7a192e1290b1..000000000000 --- a/include/asm-cris/arch-v10/Kbuild +++ /dev/null @@ -1,4 +0,0 @@ -header-y += user.h -header-y += svinto.h -header-y += sv_addr_ag.h -header-y += sv_addr.agh diff --git a/include/asm-cris/arch-v10/atomic.h b/include/asm-cris/arch-v10/atomic.h deleted file mode 100644 index 6ef5e7d09024..000000000000 --- a/include/asm-cris/arch-v10/atomic.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_CRIS_ARCH_ATOMIC__ -#define __ASM_CRIS_ARCH_ATOMIC__ - -#define cris_atomic_save(addr, flags) local_irq_save(flags); -#define cris_atomic_restore(addr, flags) local_irq_restore(flags); - -#endif diff --git a/include/asm-cris/arch-v10/bitops.h b/include/asm-cris/arch-v10/bitops.h deleted file mode 100644 index be85f6de25d3..000000000000 --- a/include/asm-cris/arch-v10/bitops.h +++ /dev/null @@ -1,73 +0,0 @@ -/* asm/arch/bitops.h for Linux/CRISv10 */ - -#ifndef _CRIS_ARCH_BITOPS_H -#define _CRIS_ARCH_BITOPS_H - -/* - * Helper functions for the core of the ff[sz] functions, wrapping the - * syntactically awkward asms. The asms compute the number of leading - * zeroes of a bits-in-byte and byte-in-word and word-in-dword-swapped - * number. They differ in that the first function also inverts all bits - * in the input. - */ -static inline unsigned long cris_swapnwbrlz(unsigned long w) -{ - /* Let's just say we return the result in the same register as the - input. Saying we clobber the input but can return the result - in another register: - ! __asm__ ("swapnwbr %2\n\tlz %2,%0" - ! : "=r,r" (res), "=r,X" (dummy) : "1,0" (w)); - confuses gcc (sched.c, gcc from cris-dist-1.14). */ - - unsigned long res; - __asm__ ("swapnwbr %0 \n\t" - "lz %0,%0" - : "=r" (res) : "0" (w)); - return res; -} - -static inline unsigned long cris_swapwbrlz(unsigned long w) -{ - unsigned res; - __asm__ ("swapwbr %0 \n\t" - "lz %0,%0" - : "=r" (res) - : "0" (w)); - return res; -} - -/* - * ffz = Find First Zero in word. Undefined if no zero exists, - * so code should check against ~0UL first.. - */ -static inline unsigned long ffz(unsigned long w) -{ - return cris_swapnwbrlz(w); -} - -/** - * __ffs - find first bit in word. - * @word: The word to search - * - * Undefined if no bit exists, so code should check against 0 first. - */ -static inline unsigned long __ffs(unsigned long word) -{ - return cris_swapnwbrlz(~word); -} - -/** - * ffs - find first bit set - * @x: the word to search - * - * This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ - -static inline unsigned long kernel_ffs(unsigned long w) -{ - return w ? cris_swapwbrlz (w) + 1 : 0; -} - -#endif diff --git a/include/asm-cris/arch-v10/bug.h b/include/asm-cris/arch-v10/bug.h deleted file mode 100644 index 3485d6b34bb0..000000000000 --- a/include/asm-cris/arch-v10/bug.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef __ASM_CRISv10_ARCH_BUG_H -#define __ASM_CRISv10_ARCH_BUG_H - -#include - -#ifdef CONFIG_BUG -#ifdef CONFIG_DEBUG_BUGVERBOSE -/* The BUG() macro is used for marking obviously incorrect code paths. - * It will cause a message with the file name and line number to be printed, - * and then cause an oops. The message is actually printed by handle_BUG() - * in arch/cris/kernel/traps.c, and the reason we use this method of storing - * the file name and line number is that we do not want to affect the registers - * by calling printk() before causing the oops. - */ - -#define BUG_PREFIX 0x0D7F -#define BUG_MAGIC 0x00001234 - -struct bug_frame { - unsigned short prefix; - unsigned int magic; - unsigned short clear; - unsigned short movu; - unsigned short line; - unsigned short jump; - unsigned char *filename; -}; - -#if 0 -/* Unfortunately this version of the macro does not work due to a problem - * with the compiler (aka a bug) when compiling with -O2, which sometimes - * erroneously causes the second input to be stored in a register... - */ -#define BUG() \ - __asm__ __volatile__ ("clear.d [" __stringify(BUG_MAGIC) "]\n\t"\ - "movu.w %0,$r0\n\t" \ - "jump %1\n\t" \ - : : "i" (__LINE__), "i" (__FILE__)) -#else -/* This version will have to do for now, until the compiler is fixed. - * The drawbacks of this version are that the file name will appear multiple - * times in the .rodata section, and that __LINE__ and __FILE__ can probably - * not be used like this with newer versions of gcc. - */ -#define BUG() \ - __asm__ __volatile__ ("clear.d [" __stringify(BUG_MAGIC) "]\n\t"\ - "movu.w " __stringify(__LINE__) ",$r0\n\t"\ - "jump 0f\n\t" \ - ".section .rodata\n" \ - "0:\t.string \"" __FILE__ "\"\n\t" \ - ".previous") -#endif - -#else - -/* This just causes an oops. */ -#define BUG() (*(int *)0 = 0) - -#endif - -#define HAVE_ARCH_BUG -#endif - -#include - -#endif diff --git a/include/asm-cris/arch-v10/byteorder.h b/include/asm-cris/arch-v10/byteorder.h deleted file mode 100644 index 255b646b7fa8..000000000000 --- a/include/asm-cris/arch-v10/byteorder.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _CRIS_ARCH_BYTEORDER_H -#define _CRIS_ARCH_BYTEORDER_H - -#include -#include - -/* we just define these two (as we can do the swap in a single - * asm instruction in CRIS) and the arch-independent files will put - * them together into ntohl etc. - */ - -static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) -{ - __asm__ ("swapwb %0" : "=r" (x) : "0" (x)); - - return(x); -} - -static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) -{ - __asm__ ("swapb %0" : "=r" (x) : "0" (x)); - - return(x); -} - -#endif diff --git a/include/asm-cris/arch-v10/cache.h b/include/asm-cris/arch-v10/cache.h deleted file mode 100644 index aea27184d2d2..000000000000 --- a/include/asm-cris/arch-v10/cache.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_ARCH_CACHE_H -#define _ASM_ARCH_CACHE_H - -/* Etrax 100LX have 32-byte cache-lines. */ -#define L1_CACHE_BYTES 32 -#define L1_CACHE_SHIFT 5 - -#endif /* _ASM_ARCH_CACHE_H */ diff --git a/include/asm-cris/arch-v10/checksum.h b/include/asm-cris/arch-v10/checksum.h deleted file mode 100644 index b8000c5d7fe1..000000000000 --- a/include/asm-cris/arch-v10/checksum.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _CRIS_ARCH_CHECKSUM_H -#define _CRIS_ARCH_CHECKSUM_H - -/* Checksum some values used in TCP/UDP headers. - * - * The gain by doing this in asm is that C will not generate carry-additions - * for the 32-bit components of the checksum, so otherwise we would have had - * to split all of those into 16-bit components, then add. - */ - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __wsum res; - __asm__ ("add.d %2, %0\n\t" - "ax\n\t" - "add.d %3, %0\n\t" - "ax\n\t" - "add.d %4, %0\n\t" - "ax\n\t" - "addq 0, %0\n" - : "=r" (res) - : "0" (sum), "r" (daddr), "r" (saddr), "r" ((len + proto) << 8)); - - return res; -} - -#endif diff --git a/include/asm-cris/arch-v10/delay.h b/include/asm-cris/arch-v10/delay.h deleted file mode 100644 index 39481f6e0c30..000000000000 --- a/include/asm-cris/arch-v10/delay.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _CRIS_ARCH_DELAY_H -#define _CRIS_ARCH_DELAY_H - -static inline void __delay(int loops) -{ - __asm__ __volatile__ ( - "move.d %0,$r9\n\t" - "beq 2f\n\t" - "subq 1,$r9\n\t" - "1:\n\t" - "bne 1b\n\t" - "subq 1,$r9\n" - "2:" - : : "g" (loops) : "r9"); -} - -#endif /* defined(_CRIS_ARCH_DELAY_H) */ - - - diff --git a/include/asm-cris/arch-v10/dma.h b/include/asm-cris/arch-v10/dma.h deleted file mode 100644 index ecb9dba6fa4f..000000000000 --- a/include/asm-cris/arch-v10/dma.h +++ /dev/null @@ -1,74 +0,0 @@ -/* Defines for using and allocating dma channels. */ - -#ifndef _ASM_ARCH_DMA_H -#define _ASM_ARCH_DMA_H - -#define MAX_DMA_CHANNELS 10 - -/* dma0 and dma1 used for network (ethernet) */ -#define NETWORK_TX_DMA_NBR 0 -#define NETWORK_RX_DMA_NBR 1 - -/* dma2 and dma3 shared by par0, scsi0, ser2 and ata */ -#define PAR0_TX_DMA_NBR 2 -#define PAR0_RX_DMA_NBR 3 -#define SCSI0_TX_DMA_NBR 2 -#define SCSI0_RX_DMA_NBR 3 -#define SER2_TX_DMA_NBR 2 -#define SER2_RX_DMA_NBR 3 -#define ATA_TX_DMA_NBR 2 -#define ATA_RX_DMA_NBR 3 - -/* dma4 and dma5 shared by par1, scsi1, ser3 and extdma0 */ -#define PAR1_TX_DMA_NBR 4 -#define PAR1_RX_DMA_NBR 5 -#define SCSI1_TX_DMA_NBR 4 -#define SCSI1_RX_DMA_NBR 5 -#define SER3_TX_DMA_NBR 4 -#define SER3_RX_DMA_NBR 5 -#define EXTDMA0_TX_DMA_NBR 4 -#define EXTDMA0_RX_DMA_NBR 5 - -/* dma6 and dma7 shared by ser0, extdma1 and mem2mem */ -#define SER0_TX_DMA_NBR 6 -#define SER0_RX_DMA_NBR 7 -#define EXTDMA1_TX_DMA_NBR 6 -#define EXTDMA1_RX_DMA_NBR 7 -#define MEM2MEM_TX_DMA_NBR 6 -#define MEM2MEM_RX_DMA_NBR 7 - -/* dma8 and dma9 shared by ser1 and usb */ -#define SER1_TX_DMA_NBR 8 -#define SER1_RX_DMA_NBR 9 -#define USB_TX_DMA_NBR 8 -#define USB_RX_DMA_NBR 9 - -#endif - -enum dma_owner -{ - dma_eth, - dma_ser0, - dma_ser1, /* Async and sync */ - dma_ser2, - dma_ser3, /* Async and sync */ - dma_ata, - dma_par0, - dma_par1, - dma_ext0, - dma_ext1, - dma_int6, - dma_int7, - dma_usb, - dma_scsi0, - dma_scsi1 -}; - -/* Masks used by cris_request_dma options: */ -#define DMA_VERBOSE_ON_ERROR (1<<0) -#define DMA_PANIC_ON_ERROR ((1<<1)|DMA_VERBOSE_ON_ERROR) - -int cris_request_dma(unsigned int dmanr, const char * device_id, - unsigned options, enum dma_owner owner); - -void cris_free_dma(unsigned int dmanr, const char * device_id); diff --git a/include/asm-cris/arch-v10/elf.h b/include/asm-cris/arch-v10/elf.h deleted file mode 100644 index 1c38ee728b17..000000000000 --- a/include/asm-cris/arch-v10/elf.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef __ASMCRIS_ARCH_ELF_H -#define __ASMCRIS_ARCH_ELF_H - -#define ELF_MACH EF_CRIS_VARIANT_ANY_V0_V10 - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) \ - ((x)->e_machine == EM_CRIS \ - && ((((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_ANY_V0_V10 \ - || (((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_COMMON_V10_V32)))) - -/* - * ELF register definitions.. - */ - -#include - -/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program - starts (a register; assume first param register for CRIS) - contains a pointer to a function which might be - registered using `atexit'. This provides a mean for the - dynamic linker to call DT_FINI functions for shared libraries - that have been loaded before the code runs. - - A value of 0 tells we have no such handler. */ - -/* Explicitly set registers to 0 to increase determinism. */ -#define ELF_PLAT_INIT(_r, load_addr) do { \ - (_r)->r13 = 0; (_r)->r12 = 0; (_r)->r11 = 0; (_r)->r10 = 0; \ - (_r)->r9 = 0; (_r)->r8 = 0; (_r)->r7 = 0; (_r)->r6 = 0; \ - (_r)->r5 = 0; (_r)->r4 = 0; (_r)->r3 = 0; (_r)->r2 = 0; \ - (_r)->r1 = 0; (_r)->r0 = 0; (_r)->mof = 0; (_r)->srp = 0; \ -} while (0) - -/* The additional layer below is because the stack pointer is missing in - the pt_regs struct, but needed in a core dump. pr_reg is a elf_gregset_t, - and should be filled in according to the layout of the user_regs_struct - struct; regs is a pt_regs struct. We dump all registers, though several are - obviously unnecessary. That way there's less need for intelligence at - the receiving end (i.e. gdb). */ -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ - pr_reg[0] = regs->r0; \ - pr_reg[1] = regs->r1; \ - pr_reg[2] = regs->r2; \ - pr_reg[3] = regs->r3; \ - pr_reg[4] = regs->r4; \ - pr_reg[5] = regs->r5; \ - pr_reg[6] = regs->r6; \ - pr_reg[7] = regs->r7; \ - pr_reg[8] = regs->r8; \ - pr_reg[9] = regs->r9; \ - pr_reg[10] = regs->r10; \ - pr_reg[11] = regs->r11; \ - pr_reg[12] = regs->r12; \ - pr_reg[13] = regs->r13; \ - pr_reg[14] = rdusp(); /* sp */ \ - pr_reg[15] = regs->irp; /* pc */ \ - pr_reg[16] = 0; /* p0 */ \ - pr_reg[17] = rdvr(); /* vr */ \ - pr_reg[18] = 0; /* p2 */ \ - pr_reg[19] = 0; /* p3 */ \ - pr_reg[20] = 0; /* p4 */ \ - pr_reg[21] = (regs->dccr & 0xffff); /* ccr */ \ - pr_reg[22] = 0; /* p6 */ \ - pr_reg[23] = regs->mof; /* mof */ \ - pr_reg[24] = 0; /* p8 */ \ - pr_reg[25] = 0; /* ibr */ \ - pr_reg[26] = 0; /* irp */ \ - pr_reg[27] = regs->srp; /* srp */ \ - pr_reg[28] = 0; /* bar */ \ - pr_reg[29] = regs->dccr; /* dccr */ \ - pr_reg[30] = 0; /* brp */ \ - pr_reg[31] = rdusp(); /* usp */ \ - pr_reg[32] = 0; /* csrinstr */ \ - pr_reg[33] = 0; /* csraddr */ \ - pr_reg[34] = 0; /* csrdata */ - - -#endif diff --git a/include/asm-cris/arch-v10/io.h b/include/asm-cris/arch-v10/io.h deleted file mode 100644 index c08c24265299..000000000000 --- a/include/asm-cris/arch-v10/io.h +++ /dev/null @@ -1,199 +0,0 @@ -#ifndef _ASM_ARCH_CRIS_IO_H -#define _ASM_ARCH_CRIS_IO_H - -#include - -/* Etrax shadow registers - which live in arch/cris/kernel/shadows.c */ - -extern unsigned long gen_config_ii_shadow; -extern unsigned long port_g_data_shadow; -extern unsigned char port_pa_dir_shadow; -extern unsigned char port_pa_data_shadow; -extern unsigned char port_pb_i2c_shadow; -extern unsigned char port_pb_config_shadow; -extern unsigned char port_pb_dir_shadow; -extern unsigned char port_pb_data_shadow; -extern unsigned long r_timer_ctrl_shadow; - -extern unsigned long port_cse1_shadow; -extern unsigned long port_csp0_shadow; -extern unsigned long port_csp4_shadow; - -extern volatile unsigned long *port_cse1_addr; -extern volatile unsigned long *port_csp0_addr; -extern volatile unsigned long *port_csp4_addr; - -/* macro for setting regs through a shadow - - * r = register name (like R_PORT_PA_DATA) - * s = shadow name (like port_pa_data_shadow) - * b = bit number - * v = value (0 or 1) - */ - -#define REG_SHADOW_SET(r,s,b,v) *r = s = (s & ~(1 << (b))) | ((v) << (b)) - -/* The LED's on various Etrax-based products are set differently. */ - -#if defined(CONFIG_ETRAX_NO_LEDS) || defined(CONFIG_SVINTO_SIM) -#undef CONFIG_ETRAX_PA_LEDS -#undef CONFIG_ETRAX_PB_LEDS -#undef CONFIG_ETRAX_CSP0_LEDS -#define CRIS_LED_NETWORK_SET_G(x) -#define CRIS_LED_NETWORK_SET_R(x) -#define CRIS_LED_ACTIVE_SET_G(x) -#define CRIS_LED_ACTIVE_SET_R(x) -#define CRIS_LED_DISK_WRITE(x) -#define CRIS_LED_DISK_READ(x) -#endif - -#if !defined(CONFIG_ETRAX_CSP0_LEDS) -#define CRIS_LED_BIT_SET(x) -#define CRIS_LED_BIT_CLR(x) -#endif - -#define CRIS_LED_OFF 0x00 -#define CRIS_LED_GREEN 0x01 -#define CRIS_LED_RED 0x02 -#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED) - -#if defined(CONFIG_ETRAX_NO_LEDS) -#define CRIS_LED_NETWORK_SET(x) -#else -#if CONFIG_ETRAX_LED1G == CONFIG_ETRAX_LED1R -#define CRIS_LED_NETWORK_SET(x) \ - do { \ - CRIS_LED_NETWORK_SET_G((x) & CRIS_LED_GREEN); \ - } while (0) -#else -#define CRIS_LED_NETWORK_SET(x) \ - do { \ - CRIS_LED_NETWORK_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_NETWORK_SET_R((x) & CRIS_LED_RED); \ - } while (0) -#endif -#if CONFIG_ETRAX_LED2G == CONFIG_ETRAX_LED2R -#define CRIS_LED_ACTIVE_SET(x) \ - do { \ - CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ - } while (0) -#else -#define CRIS_LED_ACTIVE_SET(x) \ - do { \ - CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \ - } while (0) -#endif -#endif - -#ifdef CONFIG_ETRAX_PA_LEDS -#define CRIS_LED_NETWORK_SET_G(x) \ - REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED1G, !(x)) -#define CRIS_LED_NETWORK_SET_R(x) \ - REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED1R, !(x)) -#define CRIS_LED_ACTIVE_SET_G(x) \ - REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED2G, !(x)) -#define CRIS_LED_ACTIVE_SET_R(x) \ - REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED2R, !(x)) -#define CRIS_LED_DISK_WRITE(x) \ - do{\ - REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3G, !(x));\ - REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3R, !(x));\ - }while(0) -#define CRIS_LED_DISK_READ(x) \ - REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, \ - CONFIG_ETRAX_LED3G, !(x)) -#endif - -#ifdef CONFIG_ETRAX_PB_LEDS -#define CRIS_LED_NETWORK_SET_G(x) \ - REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED1G, !(x)) -#define CRIS_LED_NETWORK_SET_R(x) \ - REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED1R, !(x)) -#define CRIS_LED_ACTIVE_SET_G(x) \ - REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED2G, !(x)) -#define CRIS_LED_ACTIVE_SET_R(x) \ - REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED2R, !(x)) -#define CRIS_LED_DISK_WRITE(x) \ - do{\ - REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3G, !(x));\ - REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3R, !(x));\ - }while(0) -#define CRIS_LED_DISK_READ(x) \ - REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, \ - CONFIG_ETRAX_LED3G, !(x)) -#endif - -#ifdef CONFIG_ETRAX_CSP0_LEDS -#define CONFIGURABLE_LEDS\ - ((1 << CONFIG_ETRAX_LED1G ) | (1 << CONFIG_ETRAX_LED1R ) |\ - (1 << CONFIG_ETRAX_LED2G ) | (1 << CONFIG_ETRAX_LED2R ) |\ - (1 << CONFIG_ETRAX_LED3G ) | (1 << CONFIG_ETRAX_LED3R ) |\ - (1 << CONFIG_ETRAX_LED4G ) | (1 << CONFIG_ETRAX_LED4R ) |\ - (1 << CONFIG_ETRAX_LED5G ) | (1 << CONFIG_ETRAX_LED5R ) |\ - (1 << CONFIG_ETRAX_LED6G ) | (1 << CONFIG_ETRAX_LED6R ) |\ - (1 << CONFIG_ETRAX_LED7G ) | (1 << CONFIG_ETRAX_LED7R ) |\ - (1 << CONFIG_ETRAX_LED8Y ) | (1 << CONFIG_ETRAX_LED9Y ) |\ - (1 << CONFIG_ETRAX_LED10Y ) |(1 << CONFIG_ETRAX_LED11Y )|\ - (1 << CONFIG_ETRAX_LED12R )) - -#define CRIS_LED_NETWORK_SET_G(x) \ - REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED1G, !(x)) -#define CRIS_LED_NETWORK_SET_R(x) \ - REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED1R, !(x)) -#define CRIS_LED_ACTIVE_SET_G(x) \ - REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED2G, !(x)) -#define CRIS_LED_ACTIVE_SET_R(x) \ - REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED2R, !(x)) -#define CRIS_LED_DISK_WRITE(x) \ - do{\ - REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3G, !(x));\ - REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3R, !(x));\ - }while(0) -#define CRIS_LED_DISK_READ(x) \ - REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3G, !(x)) -#define CRIS_LED_BIT_SET(x)\ - do{\ - if((( 1 << x) & CONFIGURABLE_LEDS) != 0)\ - REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, x, 1);\ - }while(0) -#define CRIS_LED_BIT_CLR(x)\ - do{\ - if((( 1 << x) & CONFIGURABLE_LEDS) != 0)\ - REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, x, 0);\ - }while(0) -#endif - -# -#ifdef CONFIG_ETRAX_SOFT_SHUTDOWN -#define SOFT_SHUTDOWN() \ - REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_SHUTDOWN_BIT, 1) -#else -#define SOFT_SHUTDOWN() -#endif - -/* Console I/O for simulated etrax100. Use #ifdef so erroneous - use will be evident. */ -#ifdef CONFIG_SVINTO_SIM - /* Let's use the ucsim interface since it lets us do write(2, ...) */ -#define SIMCOUT(s,len) \ - asm ("moveq 4,$r9 \n\t" \ - "moveq 2,$r10 \n\t" \ - "move.d %0,$r11 \n\t" \ - "move.d %1,$r12 \n\t" \ - "push $irp \n\t" \ - "move 0f,$irp \n\t" \ - "jump -6809 \n" \ - "0: \n\t" \ - "pop $irp" \ - : : "rm" (s), "rm" (len) : "r9","r10","r11","r12","memory") -#define TRACE_ON() __extension__ \ - ({ int _Foofoo; __asm__ volatile ("bmod [%0],%0" : "=r" (_Foofoo) : "0" \ - (255)); _Foofoo; }) - -#define TRACE_OFF() do { __asm__ volatile ("bmod [%0],%0" :: "r" (254)); } while (0) -#define SIM_END() do { __asm__ volatile ("bmod [%0],%0" :: "r" (28)); } while (0) -#define CRIS_CYCLES() __extension__ \ - ({ unsigned long c; asm ("bmod [%1],%0" : "=r" (c) : "r" (27)); c;}) -#endif /* ! defined CONFIG_SVINTO_SIM */ - -#endif diff --git a/include/asm-cris/arch-v10/io_interface_mux.h b/include/asm-cris/arch-v10/io_interface_mux.h deleted file mode 100644 index d92500080883..000000000000 --- a/include/asm-cris/arch-v10/io_interface_mux.h +++ /dev/null @@ -1,75 +0,0 @@ -/* IO interface mux allocator for ETRAX100LX. - * Copyright 2004, Axis Communications AB - * $Id: io_interface_mux.h,v 1.1 2004/12/13 12:21:53 starvik Exp $ - */ - - -#ifndef _IO_INTERFACE_MUX_H -#define _IO_INTERFACE_MUX_H - - -/* C.f. ETRAX100LX Designer's Reference 20.9 */ - -/* The order in enum must match the order of interfaces[] in - * io_interface_mux.c */ -enum cris_io_interface { - /* Begin Non-multiplexed interfaces */ - if_eth = 0, - if_serial_0, - /* End Non-multiplexed interfaces */ - if_serial_1, - if_serial_2, - if_serial_3, - if_sync_serial_1, - if_sync_serial_3, - if_shared_ram, - if_shared_ram_w, - if_par_0, - if_par_1, - if_par_w, - if_scsi8_0, - if_scsi8_1, - if_scsi_w, - if_ata, - if_csp, - if_i2c, - if_usb_1, - if_usb_2, - /* GPIO pins */ - if_gpio_grp_a, - if_gpio_grp_b, - if_gpio_grp_c, - if_gpio_grp_d, - if_gpio_grp_e, - if_gpio_grp_f, - if_max_interfaces, - if_unclaimed -}; - -int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id); - -void cris_free_io_interface(enum cris_io_interface ioif); - -/* port can be 'a', 'b' or 'g' */ -int cris_io_interface_allocate_pins(const enum cris_io_interface ioif, - const char port, - const unsigned start_bit, - const unsigned stop_bit); - -/* port can be 'a', 'b' or 'g' */ -int cris_io_interface_free_pins(const enum cris_io_interface ioif, - const char port, - const unsigned start_bit, - const unsigned stop_bit); - -int cris_io_interface_register_watcher(void (*notify)(const unsigned int gpio_in_available, - const unsigned int gpio_out_available, - const unsigned char pa_available, - const unsigned char pb_available)); - -void cris_io_interface_delete_watcher(void (*notify)(const unsigned int gpio_in_available, - const unsigned int gpio_out_available, - const unsigned char pa_available, - const unsigned char pb_available)); - -#endif /* _IO_INTERFACE_MUX_H */ diff --git a/include/asm-cris/arch-v10/irq.h b/include/asm-cris/arch-v10/irq.h deleted file mode 100644 index b1128a9984ae..000000000000 --- a/include/asm-cris/arch-v10/irq.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Interrupt handling assembler and defines for Linux/CRISv10 - */ - -#ifndef _ASM_ARCH_IRQ_H -#define _ASM_ARCH_IRQ_H - -#include - -#define NR_IRQS 32 - -/* The first vector number used for IRQs in v10 is really 0x20 */ -/* but all the code and constants are offseted to make 0 the first */ -#define FIRST_IRQ 0 - -#define SOME_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, some) /* 0 ? */ -#define NMI_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, nmi) /* 1 */ -#define TIMER0_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, timer0) /* 2 */ -#define TIMER1_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, timer1) /* 3 */ -/* mio, ata, par0, scsi0 on 4 */ -/* par1, scsi1 on 5 */ -#define NETWORK_STATUS_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, network) /* 6 */ - -#define SERIAL_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, serial) /* 8 */ -#define PA_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, pa) /* 11 */ -/* extdma0 and extdma1 is at irq 12 and 13 and/or same as dma5 and dma6 ? */ -#define EXTDMA0_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, ext_dma0) -#define EXTDMA1_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, ext_dma1) - -/* dma0-9 is irq 16..25 */ -/* 16,17: network */ -#define DMA0_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma0) -#define DMA1_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma1) -#define NETWORK_DMA_TX_IRQ_NBR DMA0_TX_IRQ_NBR -#define NETWORK_DMA_RX_IRQ_NBR DMA1_RX_IRQ_NBR - -/* 18,19: dma2 and dma3 shared by par0, scsi0, ser2 and ata */ -#define DMA2_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma2) -#define DMA3_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma3) -#define SER2_DMA_TX_IRQ_NBR DMA2_TX_IRQ_NBR -#define SER2_DMA_RX_IRQ_NBR DMA3_RX_IRQ_NBR - -/* 20,21: dma4 and dma5 shared by par1, scsi1, ser3 and extdma0 */ -#define DMA4_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma4) -#define DMA5_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma5) -#define SER3_DMA_TX_IRQ_NBR DMA4_TX_IRQ_NBR -#define SER3_DMA_RX_IRQ_NBR DMA5_RX_IRQ_NBR - -/* 22,23: dma6 and dma7 shared by ser0, extdma1 and mem2mem */ -#define DMA6_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma6) -#define DMA7_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma7) -#define SER0_DMA_TX_IRQ_NBR DMA6_TX_IRQ_NBR -#define SER0_DMA_RX_IRQ_NBR DMA7_RX_IRQ_NBR -#define MEM2MEM_DMA_TX_IRQ_NBR DMA6_TX_IRQ_NBR -#define MEM2MEM_DMA_RX_IRQ_NBR DMA7_RX_IRQ_NBR - -/* 24,25: dma8 and dma9 shared by ser1 and usb */ -#define DMA8_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma8) -#define DMA9_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma9) -#define SER1_DMA_TX_IRQ_NBR DMA8_TX_IRQ_NBR -#define SER1_DMA_RX_IRQ_NBR DMA9_RX_IRQ_NBR -#define USB_DMA_TX_IRQ_NBR DMA8_TX_IRQ_NBR -#define USB_DMA_RX_IRQ_NBR DMA9_RX_IRQ_NBR - -/* usb: controller at irq 31 + uses DMA8 and DMA9 */ -#define USB_HC_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, usb) - -/* our fine, global, etrax irq vector! the pointer lives in the head.S file. */ - -typedef void (*irqvectptr)(void); - -struct etrax_interrupt_vector { - irqvectptr v[256]; -}; - -extern struct etrax_interrupt_vector *etrax_irv; -void set_int_vector(int n, irqvectptr addr); -void set_break_vector(int n, irqvectptr addr); - -#define __STR(x) #x -#define STR(x) __STR(x) - -/* SAVE_ALL saves registers so they match pt_regs */ - -#define SAVE_ALL \ - "move $irp,[$sp=$sp-16]\n\t" /* push instruction pointer and fake SBFS struct */ \ - "push $srp\n\t" /* push subroutine return pointer */ \ - "push $dccr\n\t" /* push condition codes */ \ - "push $mof\n\t" /* push multiply overflow reg */ \ - "di\n\t" /* need to disable irq's at this point */\ - "subq 14*4,$sp\n\t" /* make room for r0-r13 */ \ - "movem $r13,[$sp]\n\t" /* push the r0-r13 registers */ \ - "push $r10\n\t" /* push orig_r10 */ \ - "clear.d [$sp=$sp-4]\n\t" /* frametype - this is a normal stackframe */ - - /* BLOCK_IRQ and UNBLOCK_IRQ do the same as mask_irq and unmask_irq */ - -#define BLOCK_IRQ(mask,nr) \ - "move.d " #mask ",$r0\n\t" \ - "move.d $r0,[0xb00000d8]\n\t" - -#define UNBLOCK_IRQ(mask) \ - "move.d " #mask ",$r0\n\t" \ - "move.d $r0,[0xb00000dc]\n\t" - -#define IRQ_NAME2(nr) nr##_interrupt(void) -#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) -#define sIRQ_NAME(nr) IRQ_NAME2(sIRQ##nr) -#define BAD_IRQ_NAME(nr) IRQ_NAME2(bad_IRQ##nr) - - /* the asm IRQ handler makes sure the causing IRQ is blocked, then it calls - * do_IRQ (with irq disabled still). after that it unblocks and jumps to - * ret_from_intr (entry.S) - * - * The reason the IRQ is blocked is to allow an sti() before the handler which - * will acknowledge the interrupt is run. - */ - -#define BUILD_IRQ(nr,mask) \ -void IRQ_NAME(nr); \ -__asm__ ( \ - ".text\n\t" \ - "IRQ" #nr "_interrupt:\n\t" \ - SAVE_ALL \ - BLOCK_IRQ(mask,nr) /* this must be done to prevent irq loops when we ei later */ \ - "moveq "#nr",$r10\n\t" \ - "move.d $sp,$r11\n\t" \ - "jsr do_IRQ\n\t" /* irq.c, r10 and r11 are arguments */ \ - UNBLOCK_IRQ(mask) \ - "moveq 0,$r9\n\t" /* make ret_from_intr realise we came from an irq */ \ - "jump ret_from_intr\n\t"); - -/* This is subtle. The timer interrupt is crucial and it should not be disabled for - * too long. However, if it had been a normal interrupt as per BUILD_IRQ, it would - * have been BLOCK'ed, and then softirq's are run before we return here to UNBLOCK. - * If the softirq's take too much time to run, the timer irq won't run and the - * watchdog will kill us. - * - * Furthermore, if a lot of other irq's occur before we return here, the multiple_irq - * handler is run and it prioritizes the timer interrupt. However if we had BLOCK'ed - * it here, we would not get the multiple_irq at all. - * - * The non-blocking here is based on the knowledge that the timer interrupt is - * registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not - * be an sti() before the timer irq handler is run to acknowledge the interrupt. - */ - -#define BUILD_TIMER_IRQ(nr,mask) \ -void IRQ_NAME(nr); \ -__asm__ ( \ - ".text\n\t" \ - "IRQ" #nr "_interrupt:\n\t" \ - SAVE_ALL \ - "moveq "#nr",$r10\n\t" \ - "move.d $sp,$r11\n\t" \ - "jsr do_IRQ\n\t" /* irq.c, r10 and r11 are arguments */ \ - "moveq 0,$r9\n\t" /* make ret_from_intr realise we came from an irq */ \ - "jump ret_from_intr\n\t"); - -#endif diff --git a/include/asm-cris/arch-v10/memmap.h b/include/asm-cris/arch-v10/memmap.h deleted file mode 100644 index 13f3b971407f..000000000000 --- a/include/asm-cris/arch-v10/memmap.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_ARCH_MEMMAP_H -#define _ASM_ARCH_MEMMAP_H - -#define MEM_CSE0_START (0x00000000) -#define MEM_CSE0_SIZE (0x04000000) -#define MEM_CSE1_START (0x04000000) -#define MEM_CSE1_SIZE (0x04000000) -#define MEM_CSR0_START (0x08000000) -#define MEM_CSR1_START (0x0c000000) -#define MEM_CSP0_START (0x10000000) -#define MEM_CSP1_START (0x14000000) -#define MEM_CSP2_START (0x18000000) -#define MEM_CSP3_START (0x1c000000) -#define MEM_CSP4_START (0x20000000) -#define MEM_CSP5_START (0x24000000) -#define MEM_CSP6_START (0x28000000) -#define MEM_CSP7_START (0x2c000000) -#define MEM_DRAM_START (0x40000000) - -#define MEM_NON_CACHEABLE (0x80000000) - -#endif diff --git a/include/asm-cris/arch-v10/mmu.h b/include/asm-cris/arch-v10/mmu.h deleted file mode 100644 index df84f1716e6b..000000000000 --- a/include/asm-cris/arch-v10/mmu.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * CRIS MMU constants and PTE layout - */ - -#ifndef _CRIS_ARCH_MMU_H -#define _CRIS_ARCH_MMU_H - -/* type used in struct mm to couple an MMU context to an active mm */ - -typedef struct -{ - unsigned int page_id; -} mm_context_t; - -/* kernel memory segments */ - -#define KSEG_F 0xf0000000UL -#define KSEG_E 0xe0000000UL -#define KSEG_D 0xd0000000UL -#define KSEG_C 0xc0000000UL -#define KSEG_B 0xb0000000UL -#define KSEG_A 0xa0000000UL -#define KSEG_9 0x90000000UL -#define KSEG_8 0x80000000UL -#define KSEG_7 0x70000000UL -#define KSEG_6 0x60000000UL -#define KSEG_5 0x50000000UL -#define KSEG_4 0x40000000UL -#define KSEG_3 0x30000000UL -#define KSEG_2 0x20000000UL -#define KSEG_1 0x10000000UL -#define KSEG_0 0x00000000UL - -/* CRIS PTE bits (see R_TLB_LO in the register description) - * - * Bit: 31-13 12-------4 3 2 1 0 - * ________________________________________________ - * | pfn | reserved | global | valid | kernel | we | - * |_____|__________|________|_______|________|_____| - * - * (pfn = physical frame number) - */ - -/* Real HW-based PTE bits. We use some synonym names so that - * things become less confusing in combination with the SW-based - * bits further below. - * - */ - -#define _PAGE_WE (1<<0) /* page is write-enabled */ -#define _PAGE_SILENT_WRITE (1<<0) /* synonym */ -#define _PAGE_KERNEL (1<<1) /* page is kernel only */ -#define _PAGE_VALID (1<<2) /* page is valid */ -#define _PAGE_SILENT_READ (1<<2) /* synonym */ -#define _PAGE_GLOBAL (1<<3) /* global page - context is ignored */ - -/* Bits the HW doesn't care about but the kernel uses them in SW */ - -#define _PAGE_PRESENT (1<<4) /* page present in memory */ -#define _PAGE_FILE (1<<5) /* set: pagecache, unset: swap (when !PRESENT) */ -#define _PAGE_ACCESSED (1<<5) /* simulated in software using valid bit */ -#define _PAGE_MODIFIED (1<<6) /* simulated in software using we bit */ -#define _PAGE_READ (1<<7) /* read-enabled */ -#define _PAGE_WRITE (1<<8) /* write-enabled */ - -/* Define some higher level generic page attributes. */ - -#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED) -#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) - -#define _PAGE_TABLE (_PAGE_PRESENT | __READABLE | __WRITEABLE) -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED) - -#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_WRITE | \ - _PAGE_ACCESSED) -#define PAGE_COPY __pgprot(_PAGE_PRESENT | __READABLE) // | _PAGE_COW -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | __READABLE) -#define PAGE_KERNEL __pgprot(_PAGE_GLOBAL | _PAGE_KERNEL | \ - _PAGE_PRESENT | __READABLE | __WRITEABLE) -#define _KERNPG_TABLE (_PAGE_TABLE | _PAGE_KERNEL) - -/* - * CRIS can't do page protection for execute, and considers read the same. - * Also, write permissions imply read permissions. This is the closest we can - * get.. - */ - -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED - -#define PTE_FILE_MAX_BITS 26 - -#endif diff --git a/include/asm-cris/arch-v10/offset.h b/include/asm-cris/arch-v10/offset.h deleted file mode 100644 index 675b51d85639..000000000000 --- a/include/asm-cris/arch-v10/offset.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __ASM_OFFSETS_H__ -#define __ASM_OFFSETS_H__ -/* - * DO NOT MODIFY. - * - * This file was generated by arch/cris/Makefile - * - */ - -#define PT_orig_r10 4 /* offsetof(struct pt_regs, orig_r10) */ -#define PT_r13 8 /* offsetof(struct pt_regs, r13) */ -#define PT_r12 12 /* offsetof(struct pt_regs, r12) */ -#define PT_r11 16 /* offsetof(struct pt_regs, r11) */ -#define PT_r10 20 /* offsetof(struct pt_regs, r10) */ -#define PT_r9 24 /* offsetof(struct pt_regs, r9) */ -#define PT_mof 64 /* offsetof(struct pt_regs, mof) */ -#define PT_dccr 68 /* offsetof(struct pt_regs, dccr) */ -#define PT_srp 72 /* offsetof(struct pt_regs, srp) */ - -#define TI_task 0 /* offsetof(struct thread_info, task) */ -#define TI_flags 8 /* offsetof(struct thread_info, flags) */ -#define TI_preempt_count 16 /* offsetof(struct thread_info, preempt_count) */ - -#define THREAD_ksp 0 /* offsetof(struct thread_struct, ksp) */ -#define THREAD_usp 4 /* offsetof(struct thread_struct, usp) */ -#define THREAD_dccr 8 /* offsetof(struct thread_struct, dccr) */ - -#define TASK_pid 141 /* offsetof(struct task_struct, pid) */ - -#define LCLONE_VM 256 /* CLONE_VM */ -#define LCLONE_UNTRACED 8388608 /* CLONE_UNTRACED */ - -#endif diff --git a/include/asm-cris/arch-v10/page.h b/include/asm-cris/arch-v10/page.h deleted file mode 100644 index ffafc99c3472..000000000000 --- a/include/asm-cris/arch-v10/page.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _CRIS_ARCH_PAGE_H -#define _CRIS_ARCH_PAGE_H - - -#ifdef __KERNEL__ - -/* This handles the memory map.. */ -#ifdef CONFIG_CRIS_LOW_MAP -#define PAGE_OFFSET KSEG_6 /* kseg_6 is mapped to physical ram */ -#else -#define PAGE_OFFSET KSEG_C /* kseg_c is mapped to physical ram */ -#endif - -/* macros to convert between really physical and virtual addresses - * by stripping a selected bit, we can convert between KSEG_x and - * 0x40000000 where the DRAM really resides - */ - -#ifdef CONFIG_CRIS_LOW_MAP -/* we have DRAM virtually at 0x6 */ -#define __pa(x) ((unsigned long)(x) & 0xdfffffff) -#define __va(x) ((void *)((unsigned long)(x) | 0x20000000)) -#else -/* we have DRAM virtually at 0xc */ -#define __pa(x) ((unsigned long)(x) & 0x7fffffff) -#define __va(x) ((void *)((unsigned long)(x) | 0x80000000)) -#endif - -#endif -#endif diff --git a/include/asm-cris/arch-v10/pgtable.h b/include/asm-cris/arch-v10/pgtable.h deleted file mode 100644 index 2a2576d1fc97..000000000000 --- a/include/asm-cris/arch-v10/pgtable.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _CRIS_ARCH_PGTABLE_H -#define _CRIS_ARCH_PGTABLE_H - -/* - * Kernels own virtual memory area. - */ - -#ifdef CONFIG_CRIS_LOW_MAP -#define VMALLOC_START KSEG_7 -#define VMALLOC_END KSEG_8 -#else -#define VMALLOC_START KSEG_D -#define VMALLOC_END KSEG_E -#endif - -#endif - diff --git a/include/asm-cris/arch-v10/processor.h b/include/asm-cris/arch-v10/processor.h deleted file mode 100644 index cc692c7a0660..000000000000 --- a/include/asm-cris/arch-v10/processor.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __ASM_CRIS_ARCH_PROCESSOR_H -#define __ASM_CRIS_ARCH_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({void *pc; __asm__ ("move.d $pc,%0" : "=rm" (pc)); pc; }) - -/* CRIS has no problems with write protection */ -#define wp_works_ok 1 - -/* CRIS thread_struct. this really has nothing to do with the processor itself, since - * CRIS does not do any hardware task-switching, but it's here for legacy reasons. - * The thread_struct here is used when task-switching using _resume defined in entry.S. - * The offsets here are hardcoded into _resume - if you change this struct, you need to - * change them as well!!! -*/ - -struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned long dccr; /* saved flag register */ -}; - -/* - * User space process size. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ - -#ifdef CONFIG_CRIS_LOW_MAP -#define TASK_SIZE (0x50000000UL) /* 1.25 GB */ -#else -#define TASK_SIZE (0xA0000000UL) /* 2.56 GB */ -#endif - -#define INIT_THREAD { \ - 0, 0, 0x20 } /* ccr = int enable, nothing else */ - -#define KSTK_EIP(tsk) \ -({ \ - unsigned long eip = 0; \ - unsigned long regs = (unsigned long)task_pt_regs(tsk); \ - if (regs > PAGE_SIZE && \ - virt_addr_valid(regs)) \ - eip = ((struct pt_regs *)regs)->irp; \ - eip; \ -}) - -/* give the thread a program location - * set user-mode (The 'U' flag (User mode flag) is CCR/DCCR bit 8) - * switch user-stackpointer - */ - -#define start_thread(regs, ip, usp) do { \ - set_fs(USER_DS); \ - regs->irp = ip; \ - regs->dccr |= 1 << U_DCCR_BITNR; \ - wrusp(usp); \ -} while(0) - -/* Called when handling a kernel bus fault fixup. - * - * After a fixup we do not want to return by restoring the CPU-state - * anymore, so switch frame-types (see ptrace.h) - */ -#define arch_fixup(regs) \ - regs->frametype = CRIS_FRAME_NORMAL; - -#endif diff --git a/include/asm-cris/arch-v10/ptrace.h b/include/asm-cris/arch-v10/ptrace.h deleted file mode 100644 index 2f464eab3a51..000000000000 --- a/include/asm-cris/arch-v10/ptrace.h +++ /dev/null @@ -1,119 +0,0 @@ -#ifndef _CRIS_ARCH_PTRACE_H -#define _CRIS_ARCH_PTRACE_H - -/* Frame types */ - -#define CRIS_FRAME_NORMAL 0 /* normal frame without SBFS stacking */ -#define CRIS_FRAME_BUSFAULT 1 /* frame stacked using SBFS, need RBF return - path */ - -/* Register numbers in the ptrace system call interface */ - -#define PT_FRAMETYPE 0 -#define PT_ORIG_R10 1 -#define PT_R13 2 -#define PT_R12 3 -#define PT_R11 4 -#define PT_R10 5 -#define PT_R9 6 -#define PT_R8 7 -#define PT_R7 8 -#define PT_R6 9 -#define PT_R5 10 -#define PT_R4 11 -#define PT_R3 12 -#define PT_R2 13 -#define PT_R1 14 -#define PT_R0 15 -#define PT_MOF 16 -#define PT_DCCR 17 -#define PT_SRP 18 -#define PT_IRP 19 /* This is actually the debugged process' PC */ -#define PT_CSRINSTR 20 /* CPU Status record remnants - - valid if frametype == busfault */ -#define PT_CSRADDR 21 -#define PT_CSRDATA 22 -#define PT_USP 23 /* special case - USP is not in the pt_regs */ -#define PT_MAX 23 - -/* Condition code bit numbers. The same numbers apply to CCR of course, - but we use DCCR everywhere else, so let's try and be consistent. */ -#define C_DCCR_BITNR 0 -#define V_DCCR_BITNR 1 -#define Z_DCCR_BITNR 2 -#define N_DCCR_BITNR 3 -#define X_DCCR_BITNR 4 -#define I_DCCR_BITNR 5 -#define B_DCCR_BITNR 6 -#define M_DCCR_BITNR 7 -#define U_DCCR_BITNR 8 -#define P_DCCR_BITNR 9 -#define F_DCCR_BITNR 10 - -/* pt_regs not only specifices the format in the user-struct during - * ptrace but is also the frame format used in the kernel prologue/epilogues - * themselves - */ - -struct pt_regs { - unsigned long frametype; /* type of stackframe */ - unsigned long orig_r10; - /* pushed by movem r13, [sp] in SAVE_ALL, movem pushes backwards */ - unsigned long r13; - unsigned long r12; - unsigned long r11; - unsigned long r10; - unsigned long r9; - unsigned long r8; - unsigned long r7; - unsigned long r6; - unsigned long r5; - unsigned long r4; - unsigned long r3; - unsigned long r2; - unsigned long r1; - unsigned long r0; - unsigned long mof; - unsigned long dccr; - unsigned long srp; - unsigned long irp; /* This is actually the debugged process' PC */ - unsigned long csrinstr; - unsigned long csraddr; - unsigned long csrdata; -}; - -/* switch_stack is the extra stuff pushed onto the stack in _resume (entry.S) - * when doing a context-switch. it is used (apart from in resume) when a new - * thread is made and we need to make _resume (which is starting it for the - * first time) realise what is going on. - * - * Actually, the use is very close to the thread struct (TSS) in that both the - * switch_stack and the TSS are used to keep thread stuff when switching in - * _resume. - */ - -struct switch_stack { - unsigned long r9; - unsigned long r8; - unsigned long r7; - unsigned long r6; - unsigned long r5; - unsigned long r4; - unsigned long r3; - unsigned long r2; - unsigned long r1; - unsigned long r0; - unsigned long return_ip; /* ip that _resume will return to */ -}; - -#ifdef __KERNEL__ - -/* bit 8 is user-mode flag */ -#define user_mode(regs) (((regs)->dccr & 0x100) != 0) -#define instruction_pointer(regs) ((regs)->irp) -#define profile_pc(regs) instruction_pointer(regs) -extern void show_regs(struct pt_regs *); - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-cris/arch-v10/sv_addr.agh b/include/asm-cris/arch-v10/sv_addr.agh deleted file mode 100644 index 6ac3a7bc9760..000000000000 --- a/include/asm-cris/arch-v10/sv_addr.agh +++ /dev/null @@ -1,7306 +0,0 @@ -/* -!* This file was automatically generated by /n/asic/bin/reg_macro_gen -!* from the file `/n/asic/projects/etrax_ng/doc/work/etrax_ng_regs.rd'. -!* Editing within this file is thus not recommended, -!* make the changes in `/n/asic/projects/etrax_ng/doc/work/etrax_ng_regs.rd' instead. -!*/ - - -/* -!* Bus interface configuration registers -!*/ - -#define R_WAITSTATES (IO_TYPECAST_UDWORD 0xb0000000) -#define R_WAITSTATES__pcs4_7_zw__BITNR 30 -#define R_WAITSTATES__pcs4_7_zw__WIDTH 2 -#define R_WAITSTATES__pcs4_7_ew__BITNR 28 -#define R_WAITSTATES__pcs4_7_ew__WIDTH 2 -#define R_WAITSTATES__pcs4_7_lw__BITNR 24 -#define R_WAITSTATES__pcs4_7_lw__WIDTH 4 -#define R_WAITSTATES__pcs0_3_zw__BITNR 22 -#define R_WAITSTATES__pcs0_3_zw__WIDTH 2 -#define R_WAITSTATES__pcs0_3_ew__BITNR 20 -#define R_WAITSTATES__pcs0_3_ew__WIDTH 2 -#define R_WAITSTATES__pcs0_3_lw__BITNR 16 -#define R_WAITSTATES__pcs0_3_lw__WIDTH 4 -#define R_WAITSTATES__sram_zw__BITNR 14 -#define R_WAITSTATES__sram_zw__WIDTH 2 -#define R_WAITSTATES__sram_ew__BITNR 12 -#define R_WAITSTATES__sram_ew__WIDTH 2 -#define R_WAITSTATES__sram_lw__BITNR 8 -#define R_WAITSTATES__sram_lw__WIDTH 4 -#define R_WAITSTATES__flash_zw__BITNR 6 -#define R_WAITSTATES__flash_zw__WIDTH 2 -#define R_WAITSTATES__flash_ew__BITNR 4 -#define R_WAITSTATES__flash_ew__WIDTH 2 -#define R_WAITSTATES__flash_lw__BITNR 0 -#define R_WAITSTATES__flash_lw__WIDTH 4 - -#define R_BUS_CONFIG (IO_TYPECAST_UDWORD 0xb0000004) -#define R_BUS_CONFIG__sram_type__BITNR 9 -#define R_BUS_CONFIG__sram_type__WIDTH 1 -#define R_BUS_CONFIG__sram_type__cwe 1 -#define R_BUS_CONFIG__sram_type__bwe 0 -#define R_BUS_CONFIG__dma_burst__BITNR 8 -#define R_BUS_CONFIG__dma_burst__WIDTH 1 -#define R_BUS_CONFIG__dma_burst__burst16 1 -#define R_BUS_CONFIG__dma_burst__burst32 0 -#define R_BUS_CONFIG__pcs4_7_wr__BITNR 7 -#define R_BUS_CONFIG__pcs4_7_wr__WIDTH 1 -#define R_BUS_CONFIG__pcs4_7_wr__ext 1 -#define R_BUS_CONFIG__pcs4_7_wr__norm 0 -#define R_BUS_CONFIG__pcs0_3_wr__BITNR 6 -#define R_BUS_CONFIG__pcs0_3_wr__WIDTH 1 -#define R_BUS_CONFIG__pcs0_3_wr__ext 1 -#define R_BUS_CONFIG__pcs0_3_wr__norm 0 -#define R_BUS_CONFIG__sram_wr__BITNR 5 -#define R_BUS_CONFIG__sram_wr__WIDTH 1 -#define R_BUS_CONFIG__sram_wr__ext 1 -#define R_BUS_CONFIG__sram_wr__norm 0 -#define R_BUS_CONFIG__flash_wr__BITNR 4 -#define R_BUS_CONFIG__flash_wr__WIDTH 1 -#define R_BUS_CONFIG__flash_wr__ext 1 -#define R_BUS_CONFIG__flash_wr__norm 0 -#define R_BUS_CONFIG__pcs4_7_bw__BITNR 3 -#define R_BUS_CONFIG__pcs4_7_bw__WIDTH 1 -#define R_BUS_CONFIG__pcs4_7_bw__bw32 1 -#define R_BUS_CONFIG__pcs4_7_bw__bw16 0 -#define R_BUS_CONFIG__pcs0_3_bw__BITNR 2 -#define R_BUS_CONFIG__pcs0_3_bw__WIDTH 1 -#define R_BUS_CONFIG__pcs0_3_bw__bw32 1 -#define R_BUS_CONFIG__pcs0_3_bw__bw16 0 -#define R_BUS_CONFIG__sram_bw__BITNR 1 -#define R_BUS_CONFIG__sram_bw__WIDTH 1 -#define R_BUS_CONFIG__sram_bw__bw32 1 -#define R_BUS_CONFIG__sram_bw__bw16 0 -#define R_BUS_CONFIG__flash_bw__BITNR 0 -#define R_BUS_CONFIG__flash_bw__WIDTH 1 -#define R_BUS_CONFIG__flash_bw__bw32 1 -#define R_BUS_CONFIG__flash_bw__bw16 0 - -#define R_BUS_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000004) -#define R_BUS_STATUS__pll_lock_tm__BITNR 5 -#define R_BUS_STATUS__pll_lock_tm__WIDTH 1 -#define R_BUS_STATUS__pll_lock_tm__expired 0 -#define R_BUS_STATUS__pll_lock_tm__counting 1 -#define R_BUS_STATUS__both_faults__BITNR 4 -#define R_BUS_STATUS__both_faults__WIDTH 1 -#define R_BUS_STATUS__both_faults__no 0 -#define R_BUS_STATUS__both_faults__yes 1 -#define R_BUS_STATUS__bsen___BITNR 3 -#define R_BUS_STATUS__bsen___WIDTH 1 -#define R_BUS_STATUS__bsen___enable 0 -#define R_BUS_STATUS__bsen___disable 1 -#define R_BUS_STATUS__boot__BITNR 1 -#define R_BUS_STATUS__boot__WIDTH 2 -#define R_BUS_STATUS__boot__uncached 0 -#define R_BUS_STATUS__boot__serial 1 -#define R_BUS_STATUS__boot__network 2 -#define R_BUS_STATUS__boot__parallel 3 -#define R_BUS_STATUS__flashw__BITNR 0 -#define R_BUS_STATUS__flashw__WIDTH 1 -#define R_BUS_STATUS__flashw__bw32 1 -#define R_BUS_STATUS__flashw__bw16 0 - -#define R_DRAM_TIMING (IO_TYPECAST_UDWORD 0xb0000008) -#define R_DRAM_TIMING__sdram__BITNR 31 -#define R_DRAM_TIMING__sdram__WIDTH 1 -#define R_DRAM_TIMING__sdram__enable 1 -#define R_DRAM_TIMING__sdram__disable 0 -#define R_DRAM_TIMING__ref__BITNR 14 -#define R_DRAM_TIMING__ref__WIDTH 2 -#define R_DRAM_TIMING__ref__e52us 0 -#define R_DRAM_TIMING__ref__e13us 1 -#define R_DRAM_TIMING__ref__e8700ns 2 -#define R_DRAM_TIMING__ref__disable 3 -#define R_DRAM_TIMING__rp__BITNR 12 -#define R_DRAM_TIMING__rp__WIDTH 2 -#define R_DRAM_TIMING__rs__BITNR 10 -#define R_DRAM_TIMING__rs__WIDTH 2 -#define R_DRAM_TIMING__rh__BITNR 8 -#define R_DRAM_TIMING__rh__WIDTH 2 -#define R_DRAM_TIMING__w__BITNR 7 -#define R_DRAM_TIMING__w__WIDTH 1 -#define R_DRAM_TIMING__w__norm 0 -#define R_DRAM_TIMING__w__ext 1 -#define R_DRAM_TIMING__c__BITNR 6 -#define R_DRAM_TIMING__c__WIDTH 1 -#define R_DRAM_TIMING__c__norm 0 -#define R_DRAM_TIMING__c__ext 1 -#define R_DRAM_TIMING__cz__BITNR 4 -#define R_DRAM_TIMING__cz__WIDTH 2 -#define R_DRAM_TIMING__cp__BITNR 2 -#define R_DRAM_TIMING__cp__WIDTH 2 -#define R_DRAM_TIMING__cw__BITNR 0 -#define R_DRAM_TIMING__cw__WIDTH 2 - -#define R_SDRAM_TIMING (IO_TYPECAST_UDWORD 0xb0000008) -#define R_SDRAM_TIMING__sdram__BITNR 31 -#define R_SDRAM_TIMING__sdram__WIDTH 1 -#define R_SDRAM_TIMING__sdram__enable 1 -#define R_SDRAM_TIMING__sdram__disable 0 -#define R_SDRAM_TIMING__mrs_data__BITNR 16 -#define R_SDRAM_TIMING__mrs_data__WIDTH 15 -#define R_SDRAM_TIMING__ref__BITNR 14 -#define R_SDRAM_TIMING__ref__WIDTH 2 -#define R_SDRAM_TIMING__ref__e52us 0 -#define R_SDRAM_TIMING__ref__e13us 1 -#define R_SDRAM_TIMING__ref__e6500ns 2 -#define R_SDRAM_TIMING__ref__disable 3 -#define R_SDRAM_TIMING__ddr__BITNR 13 -#define R_SDRAM_TIMING__ddr__WIDTH 1 -#define R_SDRAM_TIMING__ddr__on 1 -#define R_SDRAM_TIMING__ddr__off 0 -#define R_SDRAM_TIMING__clk100__BITNR 12 -#define R_SDRAM_TIMING__clk100__WIDTH 1 -#define R_SDRAM_TIMING__clk100__on 1 -#define R_SDRAM_TIMING__clk100__off 0 -#define R_SDRAM_TIMING__ps__BITNR 11 -#define R_SDRAM_TIMING__ps__WIDTH 1 -#define R_SDRAM_TIMING__ps__on 1 -#define R_SDRAM_TIMING__ps__off 0 -#define R_SDRAM_TIMING__cmd__BITNR 9 -#define R_SDRAM_TIMING__cmd__WIDTH 2 -#define R_SDRAM_TIMING__cmd__pre 3 -#define R_SDRAM_TIMING__cmd__ref 2 -#define R_SDRAM_TIMING__cmd__mrs 1 -#define R_SDRAM_TIMING__cmd__nop 0 -#define R_SDRAM_TIMING__pde__BITNR 8 -#define R_SDRAM_TIMING__pde__WIDTH 1 -#define R_SDRAM_TIMING__rc__BITNR 6 -#define R_SDRAM_TIMING__rc__WIDTH 2 -#define R_SDRAM_TIMING__rp__BITNR 4 -#define R_SDRAM_TIMING__rp__WIDTH 2 -#define R_SDRAM_TIMING__rcd__BITNR 2 -#define R_SDRAM_TIMING__rcd__WIDTH 2 -#define R_SDRAM_TIMING__cl__BITNR 0 -#define R_SDRAM_TIMING__cl__WIDTH 2 - -#define R_DRAM_CONFIG (IO_TYPECAST_UDWORD 0xb000000c) -#define R_DRAM_CONFIG__wmm1__BITNR 31 -#define R_DRAM_CONFIG__wmm1__WIDTH 1 -#define R_DRAM_CONFIG__wmm1__wmm 1 -#define R_DRAM_CONFIG__wmm1__norm 0 -#define R_DRAM_CONFIG__wmm0__BITNR 30 -#define R_DRAM_CONFIG__wmm0__WIDTH 1 -#define R_DRAM_CONFIG__wmm0__wmm 1 -#define R_DRAM_CONFIG__wmm0__norm 0 -#define R_DRAM_CONFIG__sh1__BITNR 27 -#define R_DRAM_CONFIG__sh1__WIDTH 3 -#define R_DRAM_CONFIG__sh0__BITNR 24 -#define R_DRAM_CONFIG__sh0__WIDTH 3 -#define R_DRAM_CONFIG__w__BITNR 23 -#define R_DRAM_CONFIG__w__WIDTH 1 -#define R_DRAM_CONFIG__w__bw16 0 -#define R_DRAM_CONFIG__w__bw32 1 -#define R_DRAM_CONFIG__c__BITNR 22 -#define R_DRAM_CONFIG__c__WIDTH 1 -#define R_DRAM_CONFIG__c__byte 0 -#define R_DRAM_CONFIG__c__bank 1 -#define R_DRAM_CONFIG__e__BITNR 21 -#define R_DRAM_CONFIG__e__WIDTH 1 -#define R_DRAM_CONFIG__e__fast 0 -#define R_DRAM_CONFIG__e__edo 1 -#define R_DRAM_CONFIG__group_sel__BITNR 16 -#define R_DRAM_CONFIG__group_sel__WIDTH 5 -#define R_DRAM_CONFIG__group_sel__grp0 0 -#define R_DRAM_CONFIG__group_sel__grp1 1 -#define R_DRAM_CONFIG__group_sel__bit9 9 -#define R_DRAM_CONFIG__group_sel__bit10 10 -#define R_DRAM_CONFIG__group_sel__bit11 11 -#define R_DRAM_CONFIG__group_sel__bit12 12 -#define R_DRAM_CONFIG__group_sel__bit13 13 -#define R_DRAM_CONFIG__group_sel__bit14 14 -#define R_DRAM_CONFIG__group_sel__bit15 15 -#define R_DRAM_CONFIG__group_sel__bit16 16 -#define R_DRAM_CONFIG__group_sel__bit17 17 -#define R_DRAM_CONFIG__group_sel__bit18 18 -#define R_DRAM_CONFIG__group_sel__bit19 19 -#define R_DRAM_CONFIG__group_sel__bit20 20 -#define R_DRAM_CONFIG__group_sel__bit21 21 -#define R_DRAM_CONFIG__group_sel__bit22 22 -#define R_DRAM_CONFIG__group_sel__bit23 23 -#define R_DRAM_CONFIG__group_sel__bit24 24 -#define R_DRAM_CONFIG__group_sel__bit25 25 -#define R_DRAM_CONFIG__group_sel__bit26 26 -#define R_DRAM_CONFIG__group_sel__bit27 27 -#define R_DRAM_CONFIG__group_sel__bit28 28 -#define R_DRAM_CONFIG__group_sel__bit29 29 -#define R_DRAM_CONFIG__ca1__BITNR 13 -#define R_DRAM_CONFIG__ca1__WIDTH 3 -#define R_DRAM_CONFIG__bank23sel__BITNR 8 -#define R_DRAM_CONFIG__bank23sel__WIDTH 5 -#define R_DRAM_CONFIG__bank23sel__bank0 0 -#define R_DRAM_CONFIG__bank23sel__bank1 1 -#define R_DRAM_CONFIG__bank23sel__bit9 9 -#define R_DRAM_CONFIG__bank23sel__bit10 10 -#define R_DRAM_CONFIG__bank23sel__bit11 11 -#define R_DRAM_CONFIG__bank23sel__bit12 12 -#define R_DRAM_CONFIG__bank23sel__bit13 13 -#define R_DRAM_CONFIG__bank23sel__bit14 14 -#define R_DRAM_CONFIG__bank23sel__bit15 15 -#define R_DRAM_CONFIG__bank23sel__bit16 16 -#define R_DRAM_CONFIG__bank23sel__bit17 17 -#define R_DRAM_CONFIG__bank23sel__bit18 18 -#define R_DRAM_CONFIG__bank23sel__bit19 19 -#define R_DRAM_CONFIG__bank23sel__bit20 20 -#define R_DRAM_CONFIG__bank23sel__bit21 21 -#define R_DRAM_CONFIG__bank23sel__bit22 22 -#define R_DRAM_CONFIG__bank23sel__bit23 23 -#define R_DRAM_CONFIG__bank23sel__bit24 24 -#define R_DRAM_CONFIG__bank23sel__bit25 25 -#define R_DRAM_CONFIG__bank23sel__bit26 26 -#define R_DRAM_CONFIG__bank23sel__bit27 27 -#define R_DRAM_CONFIG__bank23sel__bit28 28 -#define R_DRAM_CONFIG__bank23sel__bit29 29 -#define R_DRAM_CONFIG__ca0__BITNR 5 -#define R_DRAM_CONFIG__ca0__WIDTH 3 -#define R_DRAM_CONFIG__bank01sel__BITNR 0 -#define R_DRAM_CONFIG__bank01sel__WIDTH 5 -#define R_DRAM_CONFIG__bank01sel__bank0 0 -#define R_DRAM_CONFIG__bank01sel__bank1 1 -#define R_DRAM_CONFIG__bank01sel__bit9 9 -#define R_DRAM_CONFIG__bank01sel__bit10 10 -#define R_DRAM_CONFIG__bank01sel__bit11 11 -#define R_DRAM_CONFIG__bank01sel__bit12 12 -#define R_DRAM_CONFIG__bank01sel__bit13 13 -#define R_DRAM_CONFIG__bank01sel__bit14 14 -#define R_DRAM_CONFIG__bank01sel__bit15 15 -#define R_DRAM_CONFIG__bank01sel__bit16 16 -#define R_DRAM_CONFIG__bank01sel__bit17 17 -#define R_DRAM_CONFIG__bank01sel__bit18 18 -#define R_DRAM_CONFIG__bank01sel__bit19 19 -#define R_DRAM_CONFIG__bank01sel__bit20 20 -#define R_DRAM_CONFIG__bank01sel__bit21 21 -#define R_DRAM_CONFIG__bank01sel__bit22 22 -#define R_DRAM_CONFIG__bank01sel__bit23 23 -#define R_DRAM_CONFIG__bank01sel__bit24 24 -#define R_DRAM_CONFIG__bank01sel__bit25 25 -#define R_DRAM_CONFIG__bank01sel__bit26 26 -#define R_DRAM_CONFIG__bank01sel__bit27 27 -#define R_DRAM_CONFIG__bank01sel__bit28 28 -#define R_DRAM_CONFIG__bank01sel__bit29 29 - -#define R_SDRAM_CONFIG (IO_TYPECAST_UDWORD 0xb000000c) -#define R_SDRAM_CONFIG__wmm1__BITNR 31 -#define R_SDRAM_CONFIG__wmm1__WIDTH 1 -#define R_SDRAM_CONFIG__wmm1__wmm 1 -#define R_SDRAM_CONFIG__wmm1__norm 0 -#define R_SDRAM_CONFIG__wmm0__BITNR 30 -#define R_SDRAM_CONFIG__wmm0__WIDTH 1 -#define R_SDRAM_CONFIG__wmm0__wmm 1 -#define R_SDRAM_CONFIG__wmm0__norm 0 -#define R_SDRAM_CONFIG__sh1__BITNR 27 -#define R_SDRAM_CONFIG__sh1__WIDTH 3 -#define R_SDRAM_CONFIG__sh0__BITNR 24 -#define R_SDRAM_CONFIG__sh0__WIDTH 3 -#define R_SDRAM_CONFIG__w__BITNR 23 -#define R_SDRAM_CONFIG__w__WIDTH 1 -#define R_SDRAM_CONFIG__w__bw16 0 -#define R_SDRAM_CONFIG__w__bw32 1 -#define R_SDRAM_CONFIG__type1__BITNR 22 -#define R_SDRAM_CONFIG__type1__WIDTH 1 -#define R_SDRAM_CONFIG__type1__bank2 0 -#define R_SDRAM_CONFIG__type1__bank4 1 -#define R_SDRAM_CONFIG__type0__BITNR 21 -#define R_SDRAM_CONFIG__type0__WIDTH 1 -#define R_SDRAM_CONFIG__type0__bank2 0 -#define R_SDRAM_CONFIG__type0__bank4 1 -#define R_SDRAM_CONFIG__group_sel__BITNR 16 -#define R_SDRAM_CONFIG__group_sel__WIDTH 5 -#define R_SDRAM_CONFIG__group_sel__grp0 0 -#define R_SDRAM_CONFIG__group_sel__grp1 1 -#define R_SDRAM_CONFIG__group_sel__bit9 9 -#define R_SDRAM_CONFIG__group_sel__bit10 10 -#define R_SDRAM_CONFIG__group_sel__bit11 11 -#define R_SDRAM_CONFIG__group_sel__bit12 12 -#define R_SDRAM_CONFIG__group_sel__bit13 13 -#define R_SDRAM_CONFIG__group_sel__bit14 14 -#define R_SDRAM_CONFIG__group_sel__bit15 15 -#define R_SDRAM_CONFIG__group_sel__bit16 16 -#define R_SDRAM_CONFIG__group_sel__bit17 17 -#define R_SDRAM_CONFIG__group_sel__bit18 18 -#define R_SDRAM_CONFIG__group_sel__bit19 19 -#define R_SDRAM_CONFIG__group_sel__bit20 20 -#define R_SDRAM_CONFIG__group_sel__bit21 21 -#define R_SDRAM_CONFIG__group_sel__bit22 22 -#define R_SDRAM_CONFIG__group_sel__bit23 23 -#define R_SDRAM_CONFIG__group_sel__bit24 24 -#define R_SDRAM_CONFIG__group_sel__bit25 25 -#define R_SDRAM_CONFIG__group_sel__bit26 26 -#define R_SDRAM_CONFIG__group_sel__bit27 27 -#define R_SDRAM_CONFIG__group_sel__bit28 28 -#define R_SDRAM_CONFIG__group_sel__bit29 29 -#define R_SDRAM_CONFIG__ca1__BITNR 13 -#define R_SDRAM_CONFIG__ca1__WIDTH 3 -#define R_SDRAM_CONFIG__bank_sel1__BITNR 8 -#define R_SDRAM_CONFIG__bank_sel1__WIDTH 5 -#define R_SDRAM_CONFIG__bank_sel1__bit9 9 -#define R_SDRAM_CONFIG__bank_sel1__bit10 10 -#define R_SDRAM_CONFIG__bank_sel1__bit11 11 -#define R_SDRAM_CONFIG__bank_sel1__bit12 12 -#define R_SDRAM_CONFIG__bank_sel1__bit13 13 -#define R_SDRAM_CONFIG__bank_sel1__bit14 14 -#define R_SDRAM_CONFIG__bank_sel1__bit15 15 -#define R_SDRAM_CONFIG__bank_sel1__bit16 16 -#define R_SDRAM_CONFIG__bank_sel1__bit17 17 -#define R_SDRAM_CONFIG__bank_sel1__bit18 18 -#define R_SDRAM_CONFIG__bank_sel1__bit19 19 -#define R_SDRAM_CONFIG__bank_sel1__bit20 20 -#define R_SDRAM_CONFIG__bank_sel1__bit21 21 -#define R_SDRAM_CONFIG__bank_sel1__bit22 22 -#define R_SDRAM_CONFIG__bank_sel1__bit23 23 -#define R_SDRAM_CONFIG__bank_sel1__bit24 24 -#define R_SDRAM_CONFIG__bank_sel1__bit25 25 -#define R_SDRAM_CONFIG__bank_sel1__bit26 26 -#define R_SDRAM_CONFIG__bank_sel1__bit27 27 -#define R_SDRAM_CONFIG__bank_sel1__bit28 28 -#define R_SDRAM_CONFIG__bank_sel1__bit29 29 -#define R_SDRAM_CONFIG__ca0__BITNR 5 -#define R_SDRAM_CONFIG__ca0__WIDTH 3 -#define R_SDRAM_CONFIG__bank_sel0__BITNR 0 -#define R_SDRAM_CONFIG__bank_sel0__WIDTH 5 -#define R_SDRAM_CONFIG__bank_sel0__bit9 9 -#define R_SDRAM_CONFIG__bank_sel0__bit10 10 -#define R_SDRAM_CONFIG__bank_sel0__bit11 11 -#define R_SDRAM_CONFIG__bank_sel0__bit12 12 -#define R_SDRAM_CONFIG__bank_sel0__bit13 13 -#define R_SDRAM_CONFIG__bank_sel0__bit14 14 -#define R_SDRAM_CONFIG__bank_sel0__bit15 15 -#define R_SDRAM_CONFIG__bank_sel0__bit16 16 -#define R_SDRAM_CONFIG__bank_sel0__bit17 17 -#define R_SDRAM_CONFIG__bank_sel0__bit18 18 -#define R_SDRAM_CONFIG__bank_sel0__bit19 19 -#define R_SDRAM_CONFIG__bank_sel0__bit20 20 -#define R_SDRAM_CONFIG__bank_sel0__bit21 21 -#define R_SDRAM_CONFIG__bank_sel0__bit22 22 -#define R_SDRAM_CONFIG__bank_sel0__bit23 23 -#define R_SDRAM_CONFIG__bank_sel0__bit24 24 -#define R_SDRAM_CONFIG__bank_sel0__bit25 25 -#define R_SDRAM_CONFIG__bank_sel0__bit26 26 -#define R_SDRAM_CONFIG__bank_sel0__bit27 27 -#define R_SDRAM_CONFIG__bank_sel0__bit28 28 -#define R_SDRAM_CONFIG__bank_sel0__bit29 29 - -/* -!* External DMA registers -!*/ - -#define R_EXT_DMA_0_CMD (IO_TYPECAST_UDWORD 0xb0000010) -#define R_EXT_DMA_0_CMD__cnt__BITNR 23 -#define R_EXT_DMA_0_CMD__cnt__WIDTH 1 -#define R_EXT_DMA_0_CMD__cnt__enable 1 -#define R_EXT_DMA_0_CMD__cnt__disable 0 -#define R_EXT_DMA_0_CMD__rqpol__BITNR 22 -#define R_EXT_DMA_0_CMD__rqpol__WIDTH 1 -#define R_EXT_DMA_0_CMD__rqpol__ahigh 0 -#define R_EXT_DMA_0_CMD__rqpol__alow 1 -#define R_EXT_DMA_0_CMD__apol__BITNR 21 -#define R_EXT_DMA_0_CMD__apol__WIDTH 1 -#define R_EXT_DMA_0_CMD__apol__ahigh 0 -#define R_EXT_DMA_0_CMD__apol__alow 1 -#define R_EXT_DMA_0_CMD__rq_ack__BITNR 20 -#define R_EXT_DMA_0_CMD__rq_ack__WIDTH 1 -#define R_EXT_DMA_0_CMD__rq_ack__burst 0 -#define R_EXT_DMA_0_CMD__rq_ack__handsh 1 -#define R_EXT_DMA_0_CMD__wid__BITNR 18 -#define R_EXT_DMA_0_CMD__wid__WIDTH 2 -#define R_EXT_DMA_0_CMD__wid__byte 0 -#define R_EXT_DMA_0_CMD__wid__word 1 -#define R_EXT_DMA_0_CMD__wid__dword 2 -#define R_EXT_DMA_0_CMD__dir__BITNR 17 -#define R_EXT_DMA_0_CMD__dir__WIDTH 1 -#define R_EXT_DMA_0_CMD__dir__input 0 -#define R_EXT_DMA_0_CMD__dir__output 1 -#define R_EXT_DMA_0_CMD__run__BITNR 16 -#define R_EXT_DMA_0_CMD__run__WIDTH 1 -#define R_EXT_DMA_0_CMD__run__start 1 -#define R_EXT_DMA_0_CMD__run__stop 0 -#define R_EXT_DMA_0_CMD__trf_count__BITNR 0 -#define R_EXT_DMA_0_CMD__trf_count__WIDTH 16 - -#define R_EXT_DMA_0_STAT (IO_TYPECAST_RO_UDWORD 0xb0000010) -#define R_EXT_DMA_0_STAT__run__BITNR 16 -#define R_EXT_DMA_0_STAT__run__WIDTH 1 -#define R_EXT_DMA_0_STAT__run__start 1 -#define R_EXT_DMA_0_STAT__run__stop 0 -#define R_EXT_DMA_0_STAT__trf_count__BITNR 0 -#define R_EXT_DMA_0_STAT__trf_count__WIDTH 16 - -#define R_EXT_DMA_0_ADDR (IO_TYPECAST_UDWORD 0xb0000014) -#define R_EXT_DMA_0_ADDR__ext0_addr__BITNR 2 -#define R_EXT_DMA_0_ADDR__ext0_addr__WIDTH 28 - -#define R_EXT_DMA_1_CMD (IO_TYPECAST_UDWORD 0xb0000018) -#define R_EXT_DMA_1_CMD__cnt__BITNR 23 -#define R_EXT_DMA_1_CMD__cnt__WIDTH 1 -#define R_EXT_DMA_1_CMD__cnt__enable 1 -#define R_EXT_DMA_1_CMD__cnt__disable 0 -#define R_EXT_DMA_1_CMD__rqpol__BITNR 22 -#define R_EXT_DMA_1_CMD__rqpol__WIDTH 1 -#define R_EXT_DMA_1_CMD__rqpol__ahigh 0 -#define R_EXT_DMA_1_CMD__rqpol__alow 1 -#define R_EXT_DMA_1_CMD__apol__BITNR 21 -#define R_EXT_DMA_1_CMD__apol__WIDTH 1 -#define R_EXT_DMA_1_CMD__apol__ahigh 0 -#define R_EXT_DMA_1_CMD__apol__alow 1 -#define R_EXT_DMA_1_CMD__rq_ack__BITNR 20 -#define R_EXT_DMA_1_CMD__rq_ack__WIDTH 1 -#define R_EXT_DMA_1_CMD__rq_ack__burst 0 -#define R_EXT_DMA_1_CMD__rq_ack__handsh 1 -#define R_EXT_DMA_1_CMD__wid__BITNR 18 -#define R_EXT_DMA_1_CMD__wid__WIDTH 2 -#define R_EXT_DMA_1_CMD__wid__byte 0 -#define R_EXT_DMA_1_CMD__wid__word 1 -#define R_EXT_DMA_1_CMD__wid__dword 2 -#define R_EXT_DMA_1_CMD__dir__BITNR 17 -#define R_EXT_DMA_1_CMD__dir__WIDTH 1 -#define R_EXT_DMA_1_CMD__dir__input 0 -#define R_EXT_DMA_1_CMD__dir__output 1 -#define R_EXT_DMA_1_CMD__run__BITNR 16 -#define R_EXT_DMA_1_CMD__run__WIDTH 1 -#define R_EXT_DMA_1_CMD__run__start 1 -#define R_EXT_DMA_1_CMD__run__stop 0 -#define R_EXT_DMA_1_CMD__trf_count__BITNR 0 -#define R_EXT_DMA_1_CMD__trf_count__WIDTH 16 - -#define R_EXT_DMA_1_STAT (IO_TYPECAST_RO_UDWORD 0xb0000018) -#define R_EXT_DMA_1_STAT__run__BITNR 16 -#define R_EXT_DMA_1_STAT__run__WIDTH 1 -#define R_EXT_DMA_1_STAT__run__start 1 -#define R_EXT_DMA_1_STAT__run__stop 0 -#define R_EXT_DMA_1_STAT__trf_count__BITNR 0 -#define R_EXT_DMA_1_STAT__trf_count__WIDTH 16 - -#define R_EXT_DMA_1_ADDR (IO_TYPECAST_UDWORD 0xb000001c) -#define R_EXT_DMA_1_ADDR__ext0_addr__BITNR 2 -#define R_EXT_DMA_1_ADDR__ext0_addr__WIDTH 28 - -/* -!* Timer registers -!*/ - -#define R_TIMER_CTRL (IO_TYPECAST_UDWORD 0xb0000020) -#define R_TIMER_CTRL__timerdiv1__BITNR 24 -#define R_TIMER_CTRL__timerdiv1__WIDTH 8 -#define R_TIMER_CTRL__timerdiv0__BITNR 16 -#define R_TIMER_CTRL__timerdiv0__WIDTH 8 -#define R_TIMER_CTRL__presc_timer1__BITNR 15 -#define R_TIMER_CTRL__presc_timer1__WIDTH 1 -#define R_TIMER_CTRL__presc_timer1__normal 0 -#define R_TIMER_CTRL__presc_timer1__prescale 1 -#define R_TIMER_CTRL__i1__BITNR 14 -#define R_TIMER_CTRL__i1__WIDTH 1 -#define R_TIMER_CTRL__i1__clr 1 -#define R_TIMER_CTRL__i1__nop 0 -#define R_TIMER_CTRL__tm1__BITNR 12 -#define R_TIMER_CTRL__tm1__WIDTH 2 -#define R_TIMER_CTRL__tm1__stop_ld 0 -#define R_TIMER_CTRL__tm1__freeze 1 -#define R_TIMER_CTRL__tm1__run 2 -#define R_TIMER_CTRL__tm1__reserved 3 -#define R_TIMER_CTRL__clksel1__BITNR 8 -#define R_TIMER_CTRL__clksel1__WIDTH 4 -#define R_TIMER_CTRL__clksel1__c300Hz 0 -#define R_TIMER_CTRL__clksel1__c600Hz 1 -#define R_TIMER_CTRL__clksel1__c1200Hz 2 -#define R_TIMER_CTRL__clksel1__c2400Hz 3 -#define R_TIMER_CTRL__clksel1__c4800Hz 4 -#define R_TIMER_CTRL__clksel1__c9600Hz 5 -#define R_TIMER_CTRL__clksel1__c19k2Hz 6 -#define R_TIMER_CTRL__clksel1__c38k4Hz 7 -#define R_TIMER_CTRL__clksel1__c57k6Hz 8 -#define R_TIMER_CTRL__clksel1__c115k2Hz 9 -#define R_TIMER_CTRL__clksel1__c230k4Hz 10 -#define R_TIMER_CTRL__clksel1__c460k8Hz 11 -#define R_TIMER_CTRL__clksel1__c921k6Hz 12 -#define R_TIMER_CTRL__clksel1__c1843k2Hz 13 -#define R_TIMER_CTRL__clksel1__c6250kHz 14 -#define R_TIMER_CTRL__clksel1__cascade0 15 -#define R_TIMER_CTRL__presc_ext__BITNR 7 -#define R_TIMER_CTRL__presc_ext__WIDTH 1 -#define R_TIMER_CTRL__presc_ext__prescale 0 -#define R_TIMER_CTRL__presc_ext__external 1 -#define R_TIMER_CTRL__i0__BITNR 6 -#define R_TIMER_CTRL__i0__WIDTH 1 -#define R_TIMER_CTRL__i0__clr 1 -#define R_TIMER_CTRL__i0__nop 0 -#define R_TIMER_CTRL__tm0__BITNR 4 -#define R_TIMER_CTRL__tm0__WIDTH 2 -#define R_TIMER_CTRL__tm0__stop_ld 0 -#define R_TIMER_CTRL__tm0__freeze 1 -#define R_TIMER_CTRL__tm0__run 2 -#define R_TIMER_CTRL__tm0__reserved 3 -#define R_TIMER_CTRL__clksel0__BITNR 0 -#define R_TIMER_CTRL__clksel0__WIDTH 4 -#define R_TIMER_CTRL__clksel0__c300Hz 0 -#define R_TIMER_CTRL__clksel0__c600Hz 1 -#define R_TIMER_CTRL__clksel0__c1200Hz 2 -#define R_TIMER_CTRL__clksel0__c2400Hz 3 -#define R_TIMER_CTRL__clksel0__c4800Hz 4 -#define R_TIMER_CTRL__clksel0__c9600Hz 5 -#define R_TIMER_CTRL__clksel0__c19k2Hz 6 -#define R_TIMER_CTRL__clksel0__c38k4Hz 7 -#define R_TIMER_CTRL__clksel0__c57k6Hz 8 -#define R_TIMER_CTRL__clksel0__c115k2Hz 9 -#define R_TIMER_CTRL__clksel0__c230k4Hz 10 -#define R_TIMER_CTRL__clksel0__c460k8Hz 11 -#define R_TIMER_CTRL__clksel0__c921k6Hz 12 -#define R_TIMER_CTRL__clksel0__c1843k2Hz 13 -#define R_TIMER_CTRL__clksel0__c6250kHz 14 -#define R_TIMER_CTRL__clksel0__flexible 15 - -#define R_TIMER_DATA (IO_TYPECAST_RO_UDWORD 0xb0000020) -#define R_TIMER_DATA__timer1__BITNR 24 -#define R_TIMER_DATA__timer1__WIDTH 8 -#define R_TIMER_DATA__timer0__BITNR 16 -#define R_TIMER_DATA__timer0__WIDTH 8 -#define R_TIMER_DATA__clkdiv_high__BITNR 8 -#define R_TIMER_DATA__clkdiv_high__WIDTH 8 -#define R_TIMER_DATA__clkdiv_low__BITNR 0 -#define R_TIMER_DATA__clkdiv_low__WIDTH 8 - -#define R_TIMER01_DATA (IO_TYPECAST_RO_UWORD 0xb0000022) -#define R_TIMER01_DATA__count__BITNR 0 -#define R_TIMER01_DATA__count__WIDTH 16 - -#define R_TIMER0_DATA (IO_TYPECAST_RO_BYTE 0xb0000022) -#define R_TIMER0_DATA__count__BITNR 0 -#define R_TIMER0_DATA__count__WIDTH 8 - -#define R_TIMER1_DATA (IO_TYPECAST_RO_BYTE 0xb0000023) -#define R_TIMER1_DATA__count__BITNR 0 -#define R_TIMER1_DATA__count__WIDTH 8 - -#define R_WATCHDOG (IO_TYPECAST_UDWORD 0xb0000024) -#define R_WATCHDOG__key__BITNR 1 -#define R_WATCHDOG__key__WIDTH 3 -#define R_WATCHDOG__enable__BITNR 0 -#define R_WATCHDOG__enable__WIDTH 1 -#define R_WATCHDOG__enable__stop 0 -#define R_WATCHDOG__enable__start 1 - -#define R_CLOCK_PRESCALE (IO_TYPECAST_UDWORD 0xb00000f0) -#define R_CLOCK_PRESCALE__ser_presc__BITNR 16 -#define R_CLOCK_PRESCALE__ser_presc__WIDTH 16 -#define R_CLOCK_PRESCALE__tim_presc__BITNR 0 -#define R_CLOCK_PRESCALE__tim_presc__WIDTH 16 - -#define R_SERIAL_PRESCALE (IO_TYPECAST_UWORD 0xb00000f2) -#define R_SERIAL_PRESCALE__ser_presc__BITNR 0 -#define R_SERIAL_PRESCALE__ser_presc__WIDTH 16 - -#define R_TIMER_PRESCALE (IO_TYPECAST_UWORD 0xb00000f0) -#define R_TIMER_PRESCALE__tim_presc__BITNR 0 -#define R_TIMER_PRESCALE__tim_presc__WIDTH 16 - -#define R_PRESCALE_STATUS (IO_TYPECAST_RO_UDWORD 0xb00000f0) -#define R_PRESCALE_STATUS__ser_status__BITNR 16 -#define R_PRESCALE_STATUS__ser_status__WIDTH 16 -#define R_PRESCALE_STATUS__tim_status__BITNR 0 -#define R_PRESCALE_STATUS__tim_status__WIDTH 16 - -#define R_SER_PRESC_STATUS (IO_TYPECAST_RO_UWORD 0xb00000f2) -#define R_SER_PRESC_STATUS__ser_status__BITNR 0 -#define R_SER_PRESC_STATUS__ser_status__WIDTH 16 - -#define R_TIM_PRESC_STATUS (IO_TYPECAST_RO_UWORD 0xb00000f0) -#define R_TIM_PRESC_STATUS__tim_status__BITNR 0 -#define R_TIM_PRESC_STATUS__tim_status__WIDTH 16 - -#define R_SYNC_SERIAL_PRESCALE (IO_TYPECAST_UDWORD 0xb00000f4) -#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__BITNR 23 -#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__WIDTH 1 -#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__codec 0 -#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__baudrate 1 -#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__BITNR 22 -#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__WIDTH 1 -#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__external 0 -#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__internal 1 -#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__BITNR 21 -#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__WIDTH 1 -#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__codec 0 -#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__baudrate 1 -#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__BITNR 20 -#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__WIDTH 1 -#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__external 0 -#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__internal 1 -#define R_SYNC_SERIAL_PRESCALE__prescaler__BITNR 16 -#define R_SYNC_SERIAL_PRESCALE__prescaler__WIDTH 3 -#define R_SYNC_SERIAL_PRESCALE__prescaler__div1 0 -#define R_SYNC_SERIAL_PRESCALE__prescaler__div2 1 -#define R_SYNC_SERIAL_PRESCALE__prescaler__div4 2 -#define R_SYNC_SERIAL_PRESCALE__prescaler__div8 3 -#define R_SYNC_SERIAL_PRESCALE__prescaler__div16 4 -#define R_SYNC_SERIAL_PRESCALE__prescaler__div32 5 -#define R_SYNC_SERIAL_PRESCALE__prescaler__div64 6 -#define R_SYNC_SERIAL_PRESCALE__prescaler__div128 7 -#define R_SYNC_SERIAL_PRESCALE__warp_mode__BITNR 15 -#define R_SYNC_SERIAL_PRESCALE__warp_mode__WIDTH 1 -#define R_SYNC_SERIAL_PRESCALE__warp_mode__normal 0 -#define R_SYNC_SERIAL_PRESCALE__warp_mode__enabled 1 -#define R_SYNC_SERIAL_PRESCALE__frame_rate__BITNR 11 -#define R_SYNC_SERIAL_PRESCALE__frame_rate__WIDTH 4 -#define R_SYNC_SERIAL_PRESCALE__word_rate__BITNR 0 -#define R_SYNC_SERIAL_PRESCALE__word_rate__WIDTH 10 - -/* -!* Shared RAM interface registers -!*/ - -#define R_SHARED_RAM_CONFIG (IO_TYPECAST_UDWORD 0xb0000040) -#define R_SHARED_RAM_CONFIG__width__BITNR 3 -#define R_SHARED_RAM_CONFIG__width__WIDTH 1 -#define R_SHARED_RAM_CONFIG__width__byte 0 -#define R_SHARED_RAM_CONFIG__width__word 1 -#define R_SHARED_RAM_CONFIG__enable__BITNR 2 -#define R_SHARED_RAM_CONFIG__enable__WIDTH 1 -#define R_SHARED_RAM_CONFIG__enable__yes 1 -#define R_SHARED_RAM_CONFIG__enable__no 0 -#define R_SHARED_RAM_CONFIG__pint__BITNR 1 -#define R_SHARED_RAM_CONFIG__pint__WIDTH 1 -#define R_SHARED_RAM_CONFIG__pint__int 1 -#define R_SHARED_RAM_CONFIG__pint__nop 0 -#define R_SHARED_RAM_CONFIG__clri__BITNR 0 -#define R_SHARED_RAM_CONFIG__clri__WIDTH 1 -#define R_SHARED_RAM_CONFIG__clri__clr 1 -#define R_SHARED_RAM_CONFIG__clri__nop 0 - -#define R_SHARED_RAM_ADDR (IO_TYPECAST_UDWORD 0xb0000044) -#define R_SHARED_RAM_ADDR__base_addr__BITNR 8 -#define R_SHARED_RAM_ADDR__base_addr__WIDTH 22 - -/* -!* General config registers -!*/ - -#define R_GEN_CONFIG (IO_TYPECAST_UDWORD 0xb000002c) -#define R_GEN_CONFIG__par_w__BITNR 31 -#define R_GEN_CONFIG__par_w__WIDTH 1 -#define R_GEN_CONFIG__par_w__select 1 -#define R_GEN_CONFIG__par_w__disable 0 -#define R_GEN_CONFIG__usb2__BITNR 30 -#define R_GEN_CONFIG__usb2__WIDTH 1 -#define R_GEN_CONFIG__usb2__select 1 -#define R_GEN_CONFIG__usb2__disable 0 -#define R_GEN_CONFIG__usb1__BITNR 29 -#define R_GEN_CONFIG__usb1__WIDTH 1 -#define R_GEN_CONFIG__usb1__select 1 -#define R_GEN_CONFIG__usb1__disable 0 -#define R_GEN_CONFIG__g24dir__BITNR 27 -#define R_GEN_CONFIG__g24dir__WIDTH 1 -#define R_GEN_CONFIG__g24dir__in 0 -#define R_GEN_CONFIG__g24dir__out 1 -#define R_GEN_CONFIG__g16_23dir__BITNR 26 -#define R_GEN_CONFIG__g16_23dir__WIDTH 1 -#define R_GEN_CONFIG__g16_23dir__in 0 -#define R_GEN_CONFIG__g16_23dir__out 1 -#define R_GEN_CONFIG__g8_15dir__BITNR 25 -#define R_GEN_CONFIG__g8_15dir__WIDTH 1 -#define R_GEN_CONFIG__g8_15dir__in 0 -#define R_GEN_CONFIG__g8_15dir__out 1 -#define R_GEN_CONFIG__g0dir__BITNR 24 -#define R_GEN_CONFIG__g0dir__WIDTH 1 -#define R_GEN_CONFIG__g0dir__in 0 -#define R_GEN_CONFIG__g0dir__out 1 -#define R_GEN_CONFIG__dma9__BITNR 23 -#define R_GEN_CONFIG__dma9__WIDTH 1 -#define R_GEN_CONFIG__dma9__usb 0 -#define R_GEN_CONFIG__dma9__serial1 1 -#define R_GEN_CONFIG__dma8__BITNR 22 -#define R_GEN_CONFIG__dma8__WIDTH 1 -#define R_GEN_CONFIG__dma8__usb 0 -#define R_GEN_CONFIG__dma8__serial1 1 -#define R_GEN_CONFIG__dma7__BITNR 20 -#define R_GEN_CONFIG__dma7__WIDTH 2 -#define R_GEN_CONFIG__dma7__unused 0 -#define R_GEN_CONFIG__dma7__serial0 1 -#define R_GEN_CONFIG__dma7__extdma1 2 -#define R_GEN_CONFIG__dma7__intdma6 3 -#define R_GEN_CONFIG__dma6__BITNR 18 -#define R_GEN_CONFIG__dma6__WIDTH 2 -#define R_GEN_CONFIG__dma6__unused 0 -#define R_GEN_CONFIG__dma6__serial0 1 -#define R_GEN_CONFIG__dma6__extdma1 2 -#define R_GEN_CONFIG__dma6__intdma7 3 -#define R_GEN_CONFIG__dma5__BITNR 16 -#define R_GEN_CONFIG__dma5__WIDTH 2 -#define R_GEN_CONFIG__dma5__par1 0 -#define R_GEN_CONFIG__dma5__scsi1 1 -#define R_GEN_CONFIG__dma5__serial3 2 -#define R_GEN_CONFIG__dma5__extdma0 3 -#define R_GEN_CONFIG__dma4__BITNR 14 -#define R_GEN_CONFIG__dma4__WIDTH 2 -#define R_GEN_CONFIG__dma4__par1 0 -#define R_GEN_CONFIG__dma4__scsi1 1 -#define R_GEN_CONFIG__dma4__serial3 2 -#define R_GEN_CONFIG__dma4__extdma0 3 -#define R_GEN_CONFIG__dma3__BITNR 12 -#define R_GEN_CONFIG__dma3__WIDTH 2 -#define R_GEN_CONFIG__dma3__par0 0 -#define R_GEN_CONFIG__dma3__scsi0 1 -#define R_GEN_CONFIG__dma3__serial2 2 -#define R_GEN_CONFIG__dma3__ata 3 -#define R_GEN_CONFIG__dma2__BITNR 10 -#define R_GEN_CONFIG__dma2__WIDTH 2 -#define R_GEN_CONFIG__dma2__par0 0 -#define R_GEN_CONFIG__dma2__scsi0 1 -#define R_GEN_CONFIG__dma2__serial2 2 -#define R_GEN_CONFIG__dma2__ata 3 -#define R_GEN_CONFIG__mio_w__BITNR 9 -#define R_GEN_CONFIG__mio_w__WIDTH 1 -#define R_GEN_CONFIG__mio_w__select 1 -#define R_GEN_CONFIG__mio_w__disable 0 -#define R_GEN_CONFIG__ser3__BITNR 8 -#define R_GEN_CONFIG__ser3__WIDTH 1 -#define R_GEN_CONFIG__ser3__select 1 -#define R_GEN_CONFIG__ser3__disable 0 -#define R_GEN_CONFIG__par1__BITNR 7 -#define R_GEN_CONFIG__par1__WIDTH 1 -#define R_GEN_CONFIG__par1__select 1 -#define R_GEN_CONFIG__par1__disable 0 -#define R_GEN_CONFIG__scsi0w__BITNR 6 -#define R_GEN_CONFIG__scsi0w__WIDTH 1 -#define R_GEN_CONFIG__scsi0w__select 1 -#define R_GEN_CONFIG__scsi0w__disable 0 -#define R_GEN_CONFIG__scsi1__BITNR 5 -#define R_GEN_CONFIG__scsi1__WIDTH 1 -#define R_GEN_CONFIG__scsi1__select 1 -#define R_GEN_CONFIG__scsi1__disable 0 -#define R_GEN_CONFIG__mio__BITNR 4 -#define R_GEN_CONFIG__mio__WIDTH 1 -#define R_GEN_CONFIG__mio__select 1 -#define R_GEN_CONFIG__mio__disable 0 -#define R_GEN_CONFIG__ser2__BITNR 3 -#define R_GEN_CONFIG__ser2__WIDTH 1 -#define R_GEN_CONFIG__ser2__select 1 -#define R_GEN_CONFIG__ser2__disable 0 -#define R_GEN_CONFIG__par0__BITNR 2 -#define R_GEN_CONFIG__par0__WIDTH 1 -#define R_GEN_CONFIG__par0__select 1 -#define R_GEN_CONFIG__par0__disable 0 -#define R_GEN_CONFIG__ata__BITNR 1 -#define R_GEN_CONFIG__ata__WIDTH 1 -#define R_GEN_CONFIG__ata__select 1 -#define R_GEN_CONFIG__ata__disable 0 -#define R_GEN_CONFIG__scsi0__BITNR 0 -#define R_GEN_CONFIG__scsi0__WIDTH 1 -#define R_GEN_CONFIG__scsi0__select 1 -#define R_GEN_CONFIG__scsi0__disable 0 - -#define R_GEN_CONFIG_II (IO_TYPECAST_UDWORD 0xb0000034) -#define R_GEN_CONFIG_II__sermode3__BITNR 6 -#define R_GEN_CONFIG_II__sermode3__WIDTH 1 -#define R_GEN_CONFIG_II__sermode3__async 0 -#define R_GEN_CONFIG_II__sermode3__sync 1 -#define R_GEN_CONFIG_II__sermode1__BITNR 4 -#define R_GEN_CONFIG_II__sermode1__WIDTH 1 -#define R_GEN_CONFIG_II__sermode1__async 0 -#define R_GEN_CONFIG_II__sermode1__sync 1 -#define R_GEN_CONFIG_II__ext_clk__BITNR 2 -#define R_GEN_CONFIG_II__ext_clk__WIDTH 1 -#define R_GEN_CONFIG_II__ext_clk__select 1 -#define R_GEN_CONFIG_II__ext_clk__disable 0 -#define R_GEN_CONFIG_II__ser2__BITNR 1 -#define R_GEN_CONFIG_II__ser2__WIDTH 1 -#define R_GEN_CONFIG_II__ser2__select 1 -#define R_GEN_CONFIG_II__ser2__disable 0 -#define R_GEN_CONFIG_II__ser3__BITNR 0 -#define R_GEN_CONFIG_II__ser3__WIDTH 1 -#define R_GEN_CONFIG_II__ser3__select 1 -#define R_GEN_CONFIG_II__ser3__disable 0 - -#define R_PORT_G_DATA (IO_TYPECAST_UDWORD 0xb0000028) -#define R_PORT_G_DATA__data__BITNR 0 -#define R_PORT_G_DATA__data__WIDTH 32 - -/* -!* General port configuration registers -!*/ - -#define R_PORT_PA_SET (IO_TYPECAST_UDWORD 0xb0000030) -#define R_PORT_PA_SET__dir7__BITNR 15 -#define R_PORT_PA_SET__dir7__WIDTH 1 -#define R_PORT_PA_SET__dir7__input 0 -#define R_PORT_PA_SET__dir7__output 1 -#define R_PORT_PA_SET__dir6__BITNR 14 -#define R_PORT_PA_SET__dir6__WIDTH 1 -#define R_PORT_PA_SET__dir6__input 0 -#define R_PORT_PA_SET__dir6__output 1 -#define R_PORT_PA_SET__dir5__BITNR 13 -#define R_PORT_PA_SET__dir5__WIDTH 1 -#define R_PORT_PA_SET__dir5__input 0 -#define R_PORT_PA_SET__dir5__output 1 -#define R_PORT_PA_SET__dir4__BITNR 12 -#define R_PORT_PA_SET__dir4__WIDTH 1 -#define R_PORT_PA_SET__dir4__input 0 -#define R_PORT_PA_SET__dir4__output 1 -#define R_PORT_PA_SET__dir3__BITNR 11 -#define R_PORT_PA_SET__dir3__WIDTH 1 -#define R_PORT_PA_SET__dir3__input 0 -#define R_PORT_PA_SET__dir3__output 1 -#define R_PORT_PA_SET__dir2__BITNR 10 -#define R_PORT_PA_SET__dir2__WIDTH 1 -#define R_PORT_PA_SET__dir2__input 0 -#define R_PORT_PA_SET__dir2__output 1 -#define R_PORT_PA_SET__dir1__BITNR 9 -#define R_PORT_PA_SET__dir1__WIDTH 1 -#define R_PORT_PA_SET__dir1__input 0 -#define R_PORT_PA_SET__dir1__output 1 -#define R_PORT_PA_SET__dir0__BITNR 8 -#define R_PORT_PA_SET__dir0__WIDTH 1 -#define R_PORT_PA_SET__dir0__input 0 -#define R_PORT_PA_SET__dir0__output 1 -#define R_PORT_PA_SET__data_out__BITNR 0 -#define R_PORT_PA_SET__data_out__WIDTH 8 - -#define R_PORT_PA_DATA (IO_TYPECAST_BYTE 0xb0000030) -#define R_PORT_PA_DATA__data_out__BITNR 0 -#define R_PORT_PA_DATA__data_out__WIDTH 8 - -#define R_PORT_PA_DIR (IO_TYPECAST_BYTE 0xb0000031) -#define R_PORT_PA_DIR__dir7__BITNR 7 -#define R_PORT_PA_DIR__dir7__WIDTH 1 -#define R_PORT_PA_DIR__dir7__input 0 -#define R_PORT_PA_DIR__dir7__output 1 -#define R_PORT_PA_DIR__dir6__BITNR 6 -#define R_PORT_PA_DIR__dir6__WIDTH 1 -#define R_PORT_PA_DIR__dir6__input 0 -#define R_PORT_PA_DIR__dir6__output 1 -#define R_PORT_PA_DIR__dir5__BITNR 5 -#define R_PORT_PA_DIR__dir5__WIDTH 1 -#define R_PORT_PA_DIR__dir5__input 0 -#define R_PORT_PA_DIR__dir5__output 1 -#define R_PORT_PA_DIR__dir4__BITNR 4 -#define R_PORT_PA_DIR__dir4__WIDTH 1 -#define R_PORT_PA_DIR__dir4__input 0 -#define R_PORT_PA_DIR__dir4__output 1 -#define R_PORT_PA_DIR__dir3__BITNR 3 -#define R_PORT_PA_DIR__dir3__WIDTH 1 -#define R_PORT_PA_DIR__dir3__input 0 -#define R_PORT_PA_DIR__dir3__output 1 -#define R_PORT_PA_DIR__dir2__BITNR 2 -#define R_PORT_PA_DIR__dir2__WIDTH 1 -#define R_PORT_PA_DIR__dir2__input 0 -#define R_PORT_PA_DIR__dir2__output 1 -#define R_PORT_PA_DIR__dir1__BITNR 1 -#define R_PORT_PA_DIR__dir1__WIDTH 1 -#define R_PORT_PA_DIR__dir1__input 0 -#define R_PORT_PA_DIR__dir1__output 1 -#define R_PORT_PA_DIR__dir0__BITNR 0 -#define R_PORT_PA_DIR__dir0__WIDTH 1 -#define R_PORT_PA_DIR__dir0__input 0 -#define R_PORT_PA_DIR__dir0__output 1 - -#define R_PORT_PA_READ (IO_TYPECAST_RO_UDWORD 0xb0000030) -#define R_PORT_PA_READ__data_in__BITNR 0 -#define R_PORT_PA_READ__data_in__WIDTH 8 - -#define R_PORT_PB_SET (IO_TYPECAST_UDWORD 0xb0000038) -#define R_PORT_PB_SET__syncser3__BITNR 29 -#define R_PORT_PB_SET__syncser3__WIDTH 1 -#define R_PORT_PB_SET__syncser3__port_cs 0 -#define R_PORT_PB_SET__syncser3__ss3extra 1 -#define R_PORT_PB_SET__syncser1__BITNR 28 -#define R_PORT_PB_SET__syncser1__WIDTH 1 -#define R_PORT_PB_SET__syncser1__port_cs 0 -#define R_PORT_PB_SET__syncser1__ss1extra 1 -#define R_PORT_PB_SET__i2c_en__BITNR 27 -#define R_PORT_PB_SET__i2c_en__WIDTH 1 -#define R_PORT_PB_SET__i2c_en__off 0 -#define R_PORT_PB_SET__i2c_en__on 1 -#define R_PORT_PB_SET__i2c_d__BITNR 26 -#define R_PORT_PB_SET__i2c_d__WIDTH 1 -#define R_PORT_PB_SET__i2c_clk__BITNR 25 -#define R_PORT_PB_SET__i2c_clk__WIDTH 1 -#define R_PORT_PB_SET__i2c_oe___BITNR 24 -#define R_PORT_PB_SET__i2c_oe___WIDTH 1 -#define R_PORT_PB_SET__i2c_oe___enable 0 -#define R_PORT_PB_SET__i2c_oe___disable 1 -#define R_PORT_PB_SET__cs7__BITNR 23 -#define R_PORT_PB_SET__cs7__WIDTH 1 -#define R_PORT_PB_SET__cs7__port 0 -#define R_PORT_PB_SET__cs7__cs 1 -#define R_PORT_PB_SET__cs6__BITNR 22 -#define R_PORT_PB_SET__cs6__WIDTH 1 -#define R_PORT_PB_SET__cs6__port 0 -#define R_PORT_PB_SET__cs6__cs 1 -#define R_PORT_PB_SET__cs5__BITNR 21 -#define R_PORT_PB_SET__cs5__WIDTH 1 -#define R_PORT_PB_SET__cs5__port 0 -#define R_PORT_PB_SET__cs5__cs 1 -#define R_PORT_PB_SET__cs4__BITNR 20 -#define R_PORT_PB_SET__cs4__WIDTH 1 -#define R_PORT_PB_SET__cs4__port 0 -#define R_PORT_PB_SET__cs4__cs 1 -#define R_PORT_PB_SET__cs3__BITNR 19 -#define R_PORT_PB_SET__cs3__WIDTH 1 -#define R_PORT_PB_SET__cs3__port 0 -#define R_PORT_PB_SET__cs3__cs 1 -#define R_PORT_PB_SET__cs2__BITNR 18 -#define R_PORT_PB_SET__cs2__WIDTH 1 -#define R_PORT_PB_SET__cs2__port 0 -#define R_PORT_PB_SET__cs2__cs 1 -#define R_PORT_PB_SET__scsi1__BITNR 17 -#define R_PORT_PB_SET__scsi1__WIDTH 1 -#define R_PORT_PB_SET__scsi1__port_cs 0 -#define R_PORT_PB_SET__scsi1__enph 1 -#define R_PORT_PB_SET__scsi0__BITNR 16 -#define R_PORT_PB_SET__scsi0__WIDTH 1 -#define R_PORT_PB_SET__scsi0__port_cs 0 -#define R_PORT_PB_SET__scsi0__enph 1 -#define R_PORT_PB_SET__dir7__BITNR 15 -#define R_PORT_PB_SET__dir7__WIDTH 1 -#define R_PORT_PB_SET__dir7__input 0 -#define R_PORT_PB_SET__dir7__output 1 -#define R_PORT_PB_SET__dir6__BITNR 14 -#define R_PORT_PB_SET__dir6__WIDTH 1 -#define R_PORT_PB_SET__dir6__input 0 -#define R_PORT_PB_SET__dir6__output 1 -#define R_PORT_PB_SET__dir5__BITNR 13 -#define R_PORT_PB_SET__dir5__WIDTH 1 -#define R_PORT_PB_SET__dir5__input 0 -#define R_PORT_PB_SET__dir5__output 1 -#define R_PORT_PB_SET__dir4__BITNR 12 -#define R_PORT_PB_SET__dir4__WIDTH 1 -#define R_PORT_PB_SET__dir4__input 0 -#define R_PORT_PB_SET__dir4__output 1 -#define R_PORT_PB_SET__dir3__BITNR 11 -#define R_PORT_PB_SET__dir3__WIDTH 1 -#define R_PORT_PB_SET__dir3__input 0 -#define R_PORT_PB_SET__dir3__output 1 -#define R_PORT_PB_SET__dir2__BITNR 10 -#define R_PORT_PB_SET__dir2__WIDTH 1 -#define R_PORT_PB_SET__dir2__input 0 -#define R_PORT_PB_SET__dir2__output 1 -#define R_PORT_PB_SET__dir1__BITNR 9 -#define R_PORT_PB_SET__dir1__WIDTH 1 -#define R_PORT_PB_SET__dir1__input 0 -#define R_PORT_PB_SET__dir1__output 1 -#define R_PORT_PB_SET__dir0__BITNR 8 -#define R_PORT_PB_SET__dir0__WIDTH 1 -#define R_PORT_PB_SET__dir0__input 0 -#define R_PORT_PB_SET__dir0__output 1 -#define R_PORT_PB_SET__data_out__BITNR 0 -#define R_PORT_PB_SET__data_out__WIDTH 8 - -#define R_PORT_PB_DATA (IO_TYPECAST_BYTE 0xb0000038) -#define R_PORT_PB_DATA__data_out__BITNR 0 -#define R_PORT_PB_DATA__data_out__WIDTH 8 - -#define R_PORT_PB_DIR (IO_TYPECAST_BYTE 0xb0000039) -#define R_PORT_PB_DIR__dir7__BITNR 7 -#define R_PORT_PB_DIR__dir7__WIDTH 1 -#define R_PORT_PB_DIR__dir7__input 0 -#define R_PORT_PB_DIR__dir7__output 1 -#define R_PORT_PB_DIR__dir6__BITNR 6 -#define R_PORT_PB_DIR__dir6__WIDTH 1 -#define R_PORT_PB_DIR__dir6__input 0 -#define R_PORT_PB_DIR__dir6__output 1 -#define R_PORT_PB_DIR__dir5__BITNR 5 -#define R_PORT_PB_DIR__dir5__WIDTH 1 -#define R_PORT_PB_DIR__dir5__input 0 -#define R_PORT_PB_DIR__dir5__output 1 -#define R_PORT_PB_DIR__dir4__BITNR 4 -#define R_PORT_PB_DIR__dir4__WIDTH 1 -#define R_PORT_PB_DIR__dir4__input 0 -#define R_PORT_PB_DIR__dir4__output 1 -#define R_PORT_PB_DIR__dir3__BITNR 3 -#define R_PORT_PB_DIR__dir3__WIDTH 1 -#define R_PORT_PB_DIR__dir3__input 0 -#define R_PORT_PB_DIR__dir3__output 1 -#define R_PORT_PB_DIR__dir2__BITNR 2 -#define R_PORT_PB_DIR__dir2__WIDTH 1 -#define R_PORT_PB_DIR__dir2__input 0 -#define R_PORT_PB_DIR__dir2__output 1 -#define R_PORT_PB_DIR__dir1__BITNR 1 -#define R_PORT_PB_DIR__dir1__WIDTH 1 -#define R_PORT_PB_DIR__dir1__input 0 -#define R_PORT_PB_DIR__dir1__output 1 -#define R_PORT_PB_DIR__dir0__BITNR 0 -#define R_PORT_PB_DIR__dir0__WIDTH 1 -#define R_PORT_PB_DIR__dir0__input 0 -#define R_PORT_PB_DIR__dir0__output 1 - -#define R_PORT_PB_CONFIG (IO_TYPECAST_BYTE 0xb000003a) -#define R_PORT_PB_CONFIG__cs7__BITNR 7 -#define R_PORT_PB_CONFIG__cs7__WIDTH 1 -#define R_PORT_PB_CONFIG__cs7__port 0 -#define R_PORT_PB_CONFIG__cs7__cs 1 -#define R_PORT_PB_CONFIG__cs6__BITNR 6 -#define R_PORT_PB_CONFIG__cs6__WIDTH 1 -#define R_PORT_PB_CONFIG__cs6__port 0 -#define R_PORT_PB_CONFIG__cs6__cs 1 -#define R_PORT_PB_CONFIG__cs5__BITNR 5 -#define R_PORT_PB_CONFIG__cs5__WIDTH 1 -#define R_PORT_PB_CONFIG__cs5__port 0 -#define R_PORT_PB_CONFIG__cs5__cs 1 -#define R_PORT_PB_CONFIG__cs4__BITNR 4 -#define R_PORT_PB_CONFIG__cs4__WIDTH 1 -#define R_PORT_PB_CONFIG__cs4__port 0 -#define R_PORT_PB_CONFIG__cs4__cs 1 -#define R_PORT_PB_CONFIG__cs3__BITNR 3 -#define R_PORT_PB_CONFIG__cs3__WIDTH 1 -#define R_PORT_PB_CONFIG__cs3__port 0 -#define R_PORT_PB_CONFIG__cs3__cs 1 -#define R_PORT_PB_CONFIG__cs2__BITNR 2 -#define R_PORT_PB_CONFIG__cs2__WIDTH 1 -#define R_PORT_PB_CONFIG__cs2__port 0 -#define R_PORT_PB_CONFIG__cs2__cs 1 -#define R_PORT_PB_CONFIG__scsi1__BITNR 1 -#define R_PORT_PB_CONFIG__scsi1__WIDTH 1 -#define R_PORT_PB_CONFIG__scsi1__port_cs 0 -#define R_PORT_PB_CONFIG__scsi1__enph 1 -#define R_PORT_PB_CONFIG__scsi0__BITNR 0 -#define R_PORT_PB_CONFIG__scsi0__WIDTH 1 -#define R_PORT_PB_CONFIG__scsi0__port_cs 0 -#define R_PORT_PB_CONFIG__scsi0__enph 1 - -#define R_PORT_PB_I2C (IO_TYPECAST_BYTE 0xb000003b) -#define R_PORT_PB_I2C__syncser3__BITNR 5 -#define R_PORT_PB_I2C__syncser3__WIDTH 1 -#define R_PORT_PB_I2C__syncser3__port_cs 0 -#define R_PORT_PB_I2C__syncser3__ss3extra 1 -#define R_PORT_PB_I2C__syncser1__BITNR 4 -#define R_PORT_PB_I2C__syncser1__WIDTH 1 -#define R_PORT_PB_I2C__syncser1__port_cs 0 -#define R_PORT_PB_I2C__syncser1__ss1extra 1 -#define R_PORT_PB_I2C__i2c_en__BITNR 3 -#define R_PORT_PB_I2C__i2c_en__WIDTH 1 -#define R_PORT_PB_I2C__i2c_en__off 0 -#define R_PORT_PB_I2C__i2c_en__on 1 -#define R_PORT_PB_I2C__i2c_d__BITNR 2 -#define R_PORT_PB_I2C__i2c_d__WIDTH 1 -#define R_PORT_PB_I2C__i2c_clk__BITNR 1 -#define R_PORT_PB_I2C__i2c_clk__WIDTH 1 -#define R_PORT_PB_I2C__i2c_oe___BITNR 0 -#define R_PORT_PB_I2C__i2c_oe___WIDTH 1 -#define R_PORT_PB_I2C__i2c_oe___enable 0 -#define R_PORT_PB_I2C__i2c_oe___disable 1 - -#define R_PORT_PB_READ (IO_TYPECAST_RO_UDWORD 0xb0000038) -#define R_PORT_PB_READ__data_in__BITNR 0 -#define R_PORT_PB_READ__data_in__WIDTH 8 - -/* -!* Serial port registers -!*/ - -#define R_SERIAL0_CTRL (IO_TYPECAST_UDWORD 0xb0000060) -#define R_SERIAL0_CTRL__tr_baud__BITNR 28 -#define R_SERIAL0_CTRL__tr_baud__WIDTH 4 -#define R_SERIAL0_CTRL__tr_baud__c300Hz 0 -#define R_SERIAL0_CTRL__tr_baud__c600Hz 1 -#define R_SERIAL0_CTRL__tr_baud__c1200Hz 2 -#define R_SERIAL0_CTRL__tr_baud__c2400Hz 3 -#define R_SERIAL0_CTRL__tr_baud__c4800Hz 4 -#define R_SERIAL0_CTRL__tr_baud__c9600Hz 5 -#define R_SERIAL0_CTRL__tr_baud__c19k2Hz 6 -#define R_SERIAL0_CTRL__tr_baud__c38k4Hz 7 -#define R_SERIAL0_CTRL__tr_baud__c57k6Hz 8 -#define R_SERIAL0_CTRL__tr_baud__c115k2Hz 9 -#define R_SERIAL0_CTRL__tr_baud__c230k4Hz 10 -#define R_SERIAL0_CTRL__tr_baud__c460k8Hz 11 -#define R_SERIAL0_CTRL__tr_baud__c921k6Hz 12 -#define R_SERIAL0_CTRL__tr_baud__c1843k2Hz 13 -#define R_SERIAL0_CTRL__tr_baud__c6250kHz 14 -#define R_SERIAL0_CTRL__tr_baud__reserved 15 -#define R_SERIAL0_CTRL__rec_baud__BITNR 24 -#define R_SERIAL0_CTRL__rec_baud__WIDTH 4 -#define R_SERIAL0_CTRL__rec_baud__c300Hz 0 -#define R_SERIAL0_CTRL__rec_baud__c600Hz 1 -#define R_SERIAL0_CTRL__rec_baud__c1200Hz 2 -#define R_SERIAL0_CTRL__rec_baud__c2400Hz 3 -#define R_SERIAL0_CTRL__rec_baud__c4800Hz 4 -#define R_SERIAL0_CTRL__rec_baud__c9600Hz 5 -#define R_SERIAL0_CTRL__rec_baud__c19k2Hz 6 -#define R_SERIAL0_CTRL__rec_baud__c38k4Hz 7 -#define R_SERIAL0_CTRL__rec_baud__c57k6Hz 8 -#define R_SERIAL0_CTRL__rec_baud__c115k2Hz 9 -#define R_SERIAL0_CTRL__rec_baud__c230k4Hz 10 -#define R_SERIAL0_CTRL__rec_baud__c460k8Hz 11 -#define R_SERIAL0_CTRL__rec_baud__c921k6Hz 12 -#define R_SERIAL0_CTRL__rec_baud__c1843k2Hz 13 -#define R_SERIAL0_CTRL__rec_baud__c6250kHz 14 -#define R_SERIAL0_CTRL__rec_baud__reserved 15 -#define R_SERIAL0_CTRL__dma_err__BITNR 23 -#define R_SERIAL0_CTRL__dma_err__WIDTH 1 -#define R_SERIAL0_CTRL__dma_err__stop 0 -#define R_SERIAL0_CTRL__dma_err__ignore 1 -#define R_SERIAL0_CTRL__rec_enable__BITNR 22 -#define R_SERIAL0_CTRL__rec_enable__WIDTH 1 -#define R_SERIAL0_CTRL__rec_enable__disable 0 -#define R_SERIAL0_CTRL__rec_enable__enable 1 -#define R_SERIAL0_CTRL__rts___BITNR 21 -#define R_SERIAL0_CTRL__rts___WIDTH 1 -#define R_SERIAL0_CTRL__rts___active 0 -#define R_SERIAL0_CTRL__rts___inactive 1 -#define R_SERIAL0_CTRL__sampling__BITNR 20 -#define R_SERIAL0_CTRL__sampling__WIDTH 1 -#define R_SERIAL0_CTRL__sampling__middle 0 -#define R_SERIAL0_CTRL__sampling__majority 1 -#define R_SERIAL0_CTRL__rec_stick_par__BITNR 19 -#define R_SERIAL0_CTRL__rec_stick_par__WIDTH 1 -#define R_SERIAL0_CTRL__rec_stick_par__normal 0 -#define R_SERIAL0_CTRL__rec_stick_par__stick 1 -#define R_SERIAL0_CTRL__rec_par__BITNR 18 -#define R_SERIAL0_CTRL__rec_par__WIDTH 1 -#define R_SERIAL0_CTRL__rec_par__even 0 -#define R_SERIAL0_CTRL__rec_par__odd 1 -#define R_SERIAL0_CTRL__rec_par_en__BITNR 17 -#define R_SERIAL0_CTRL__rec_par_en__WIDTH 1 -#define R_SERIAL0_CTRL__rec_par_en__disable 0 -#define R_SERIAL0_CTRL__rec_par_en__enable 1 -#define R_SERIAL0_CTRL__rec_bitnr__BITNR 16 -#define R_SERIAL0_CTRL__rec_bitnr__WIDTH 1 -#define R_SERIAL0_CTRL__rec_bitnr__rec_8bit 0 -#define R_SERIAL0_CTRL__rec_bitnr__rec_7bit 1 -#define R_SERIAL0_CTRL__txd__BITNR 15 -#define R_SERIAL0_CTRL__txd__WIDTH 1 -#define R_SERIAL0_CTRL__tr_enable__BITNR 14 -#define R_SERIAL0_CTRL__tr_enable__WIDTH 1 -#define R_SERIAL0_CTRL__tr_enable__disable 0 -#define R_SERIAL0_CTRL__tr_enable__enable 1 -#define R_SERIAL0_CTRL__auto_cts__BITNR 13 -#define R_SERIAL0_CTRL__auto_cts__WIDTH 1 -#define R_SERIAL0_CTRL__auto_cts__disabled 0 -#define R_SERIAL0_CTRL__auto_cts__active 1 -#define R_SERIAL0_CTRL__stop_bits__BITNR 12 -#define R_SERIAL0_CTRL__stop_bits__WIDTH 1 -#define R_SERIAL0_CTRL__stop_bits__one_bit 0 -#define R_SERIAL0_CTRL__stop_bits__two_bits 1 -#define R_SERIAL0_CTRL__tr_stick_par__BITNR 11 -#define R_SERIAL0_CTRL__tr_stick_par__WIDTH 1 -#define R_SERIAL0_CTRL__tr_stick_par__normal 0 -#define R_SERIAL0_CTRL__tr_stick_par__stick 1 -#define R_SERIAL0_CTRL__tr_par__BITNR 10 -#define R_SERIAL0_CTRL__tr_par__WIDTH 1 -#define R_SERIAL0_CTRL__tr_par__even 0 -#define R_SERIAL0_CTRL__tr_par__odd 1 -#define R_SERIAL0_CTRL__tr_par_en__BITNR 9 -#define R_SERIAL0_CTRL__tr_par_en__WIDTH 1 -#define R_SERIAL0_CTRL__tr_par_en__disable 0 -#define R_SERIAL0_CTRL__tr_par_en__enable 1 -#define R_SERIAL0_CTRL__tr_bitnr__BITNR 8 -#define R_SERIAL0_CTRL__tr_bitnr__WIDTH 1 -#define R_SERIAL0_CTRL__tr_bitnr__tr_8bit 0 -#define R_SERIAL0_CTRL__tr_bitnr__tr_7bit 1 -#define R_SERIAL0_CTRL__data_out__BITNR 0 -#define R_SERIAL0_CTRL__data_out__WIDTH 8 - -#define R_SERIAL0_BAUD (IO_TYPECAST_BYTE 0xb0000063) -#define R_SERIAL0_BAUD__tr_baud__BITNR 4 -#define R_SERIAL0_BAUD__tr_baud__WIDTH 4 -#define R_SERIAL0_BAUD__tr_baud__c300Hz 0 -#define R_SERIAL0_BAUD__tr_baud__c600Hz 1 -#define R_SERIAL0_BAUD__tr_baud__c1200Hz 2 -#define R_SERIAL0_BAUD__tr_baud__c2400Hz 3 -#define R_SERIAL0_BAUD__tr_baud__c4800Hz 4 -#define R_SERIAL0_BAUD__tr_baud__c9600Hz 5 -#define R_SERIAL0_BAUD__tr_baud__c19k2Hz 6 -#define R_SERIAL0_BAUD__tr_baud__c38k4Hz 7 -#define R_SERIAL0_BAUD__tr_baud__c57k6Hz 8 -#define R_SERIAL0_BAUD__tr_baud__c115k2Hz 9 -#define R_SERIAL0_BAUD__tr_baud__c230k4Hz 10 -#define R_SERIAL0_BAUD__tr_baud__c460k8Hz 11 -#define R_SERIAL0_BAUD__tr_baud__c921k6Hz 12 -#define R_SERIAL0_BAUD__tr_baud__c1843k2Hz 13 -#define R_SERIAL0_BAUD__tr_baud__c6250kHz 14 -#define R_SERIAL0_BAUD__tr_baud__reserved 15 -#define R_SERIAL0_BAUD__rec_baud__BITNR 0 -#define R_SERIAL0_BAUD__rec_baud__WIDTH 4 -#define R_SERIAL0_BAUD__rec_baud__c300Hz 0 -#define R_SERIAL0_BAUD__rec_baud__c600Hz 1 -#define R_SERIAL0_BAUD__rec_baud__c1200Hz 2 -#define R_SERIAL0_BAUD__rec_baud__c2400Hz 3 -#define R_SERIAL0_BAUD__rec_baud__c4800Hz 4 -#define R_SERIAL0_BAUD__rec_baud__c9600Hz 5 -#define R_SERIAL0_BAUD__rec_baud__c19k2Hz 6 -#define R_SERIAL0_BAUD__rec_baud__c38k4Hz 7 -#define R_SERIAL0_BAUD__rec_baud__c57k6Hz 8 -#define R_SERIAL0_BAUD__rec_baud__c115k2Hz 9 -#define R_SERIAL0_BAUD__rec_baud__c230k4Hz 10 -#define R_SERIAL0_BAUD__rec_baud__c460k8Hz 11 -#define R_SERIAL0_BAUD__rec_baud__c921k6Hz 12 -#define R_SERIAL0_BAUD__rec_baud__c1843k2Hz 13 -#define R_SERIAL0_BAUD__rec_baud__c6250kHz 14 -#define R_SERIAL0_BAUD__rec_baud__reserved 15 - -#define R_SERIAL0_REC_CTRL (IO_TYPECAST_BYTE 0xb0000062) -#define R_SERIAL0_REC_CTRL__dma_err__BITNR 7 -#define R_SERIAL0_REC_CTRL__dma_err__WIDTH 1 -#define R_SERIAL0_REC_CTRL__dma_err__stop 0 -#define R_SERIAL0_REC_CTRL__dma_err__ignore 1 -#define R_SERIAL0_REC_CTRL__rec_enable__BITNR 6 -#define R_SERIAL0_REC_CTRL__rec_enable__WIDTH 1 -#define R_SERIAL0_REC_CTRL__rec_enable__disable 0 -#define R_SERIAL0_REC_CTRL__rec_enable__enable 1 -#define R_SERIAL0_REC_CTRL__rts___BITNR 5 -#define R_SERIAL0_REC_CTRL__rts___WIDTH 1 -#define R_SERIAL0_REC_CTRL__rts___active 0 -#define R_SERIAL0_REC_CTRL__rts___inactive 1 -#define R_SERIAL0_REC_CTRL__sampling__BITNR 4 -#define R_SERIAL0_REC_CTRL__sampling__WIDTH 1 -#define R_SERIAL0_REC_CTRL__sampling__middle 0 -#define R_SERIAL0_REC_CTRL__sampling__majority 1 -#define R_SERIAL0_REC_CTRL__rec_stick_par__BITNR 3 -#define R_SERIAL0_REC_CTRL__rec_stick_par__WIDTH 1 -#define R_SERIAL0_REC_CTRL__rec_stick_par__normal 0 -#define R_SERIAL0_REC_CTRL__rec_stick_par__stick 1 -#define R_SERIAL0_REC_CTRL__rec_par__BITNR 2 -#define R_SERIAL0_REC_CTRL__rec_par__WIDTH 1 -#define R_SERIAL0_REC_CTRL__rec_par__even 0 -#define R_SERIAL0_REC_CTRL__rec_par__odd 1 -#define R_SERIAL0_REC_CTRL__rec_par_en__BITNR 1 -#define R_SERIAL0_REC_CTRL__rec_par_en__WIDTH 1 -#define R_SERIAL0_REC_CTRL__rec_par_en__disable 0 -#define R_SERIAL0_REC_CTRL__rec_par_en__enable 1 -#define R_SERIAL0_REC_CTRL__rec_bitnr__BITNR 0 -#define R_SERIAL0_REC_CTRL__rec_bitnr__WIDTH 1 -#define R_SERIAL0_REC_CTRL__rec_bitnr__rec_8bit 0 -#define R_SERIAL0_REC_CTRL__rec_bitnr__rec_7bit 1 - -#define R_SERIAL0_TR_CTRL (IO_TYPECAST_BYTE 0xb0000061) -#define R_SERIAL0_TR_CTRL__txd__BITNR 7 -#define R_SERIAL0_TR_CTRL__txd__WIDTH 1 -#define R_SERIAL0_TR_CTRL__tr_enable__BITNR 6 -#define R_SERIAL0_TR_CTRL__tr_enable__WIDTH 1 -#define R_SERIAL0_TR_CTRL__tr_enable__disable 0 -#define R_SERIAL0_TR_CTRL__tr_enable__enable 1 -#define R_SERIAL0_TR_CTRL__auto_cts__BITNR 5 -#define R_SERIAL0_TR_CTRL__auto_cts__WIDTH 1 -#define R_SERIAL0_TR_CTRL__auto_cts__disabled 0 -#define R_SERIAL0_TR_CTRL__auto_cts__active 1 -#define R_SERIAL0_TR_CTRL__stop_bits__BITNR 4 -#define R_SERIAL0_TR_CTRL__stop_bits__WIDTH 1 -#define R_SERIAL0_TR_CTRL__stop_bits__one_bit 0 -#define R_SERIAL0_TR_CTRL__stop_bits__two_bits 1 -#define R_SERIAL0_TR_CTRL__tr_stick_par__BITNR 3 -#define R_SERIAL0_TR_CTRL__tr_stick_par__WIDTH 1 -#define R_SERIAL0_TR_CTRL__tr_stick_par__normal 0 -#define R_SERIAL0_TR_CTRL__tr_stick_par__stick 1 -#define R_SERIAL0_TR_CTRL__tr_par__BITNR 2 -#define R_SERIAL0_TR_CTRL__tr_par__WIDTH 1 -#define R_SERIAL0_TR_CTRL__tr_par__even 0 -#define R_SERIAL0_TR_CTRL__tr_par__odd 1 -#define R_SERIAL0_TR_CTRL__tr_par_en__BITNR 1 -#define R_SERIAL0_TR_CTRL__tr_par_en__WIDTH 1 -#define R_SERIAL0_TR_CTRL__tr_par_en__disable 0 -#define R_SERIAL0_TR_CTRL__tr_par_en__enable 1 -#define R_SERIAL0_TR_CTRL__tr_bitnr__BITNR 0 -#define R_SERIAL0_TR_CTRL__tr_bitnr__WIDTH 1 -#define R_SERIAL0_TR_CTRL__tr_bitnr__tr_8bit 0 -#define R_SERIAL0_TR_CTRL__tr_bitnr__tr_7bit 1 - -#define R_SERIAL0_TR_DATA (IO_TYPECAST_BYTE 0xb0000060) -#define R_SERIAL0_TR_DATA__data_out__BITNR 0 -#define R_SERIAL0_TR_DATA__data_out__WIDTH 8 - -#define R_SERIAL0_READ (IO_TYPECAST_RO_UDWORD 0xb0000060) -#define R_SERIAL0_READ__xoff_detect__BITNR 15 -#define R_SERIAL0_READ__xoff_detect__WIDTH 1 -#define R_SERIAL0_READ__xoff_detect__no_xoff 0 -#define R_SERIAL0_READ__xoff_detect__xoff 1 -#define R_SERIAL0_READ__cts___BITNR 14 -#define R_SERIAL0_READ__cts___WIDTH 1 -#define R_SERIAL0_READ__cts___active 0 -#define R_SERIAL0_READ__cts___inactive 1 -#define R_SERIAL0_READ__tr_ready__BITNR 13 -#define R_SERIAL0_READ__tr_ready__WIDTH 1 -#define R_SERIAL0_READ__tr_ready__full 0 -#define R_SERIAL0_READ__tr_ready__ready 1 -#define R_SERIAL0_READ__rxd__BITNR 12 -#define R_SERIAL0_READ__rxd__WIDTH 1 -#define R_SERIAL0_READ__overrun__BITNR 11 -#define R_SERIAL0_READ__overrun__WIDTH 1 -#define R_SERIAL0_READ__overrun__no 0 -#define R_SERIAL0_READ__overrun__yes 1 -#define R_SERIAL0_READ__par_err__BITNR 10 -#define R_SERIAL0_READ__par_err__WIDTH 1 -#define R_SERIAL0_READ__par_err__no 0 -#define R_SERIAL0_READ__par_err__yes 1 -#define R_SERIAL0_READ__framing_err__BITNR 9 -#define R_SERIAL0_READ__framing_err__WIDTH 1 -#define R_SERIAL0_READ__framing_err__no 0 -#define R_SERIAL0_READ__framing_err__yes 1 -#define R_SERIAL0_READ__data_avail__BITNR 8 -#define R_SERIAL0_READ__data_avail__WIDTH 1 -#define R_SERIAL0_READ__data_avail__no 0 -#define R_SERIAL0_READ__data_avail__yes 1 -#define R_SERIAL0_READ__data_in__BITNR 0 -#define R_SERIAL0_READ__data_in__WIDTH 8 - -#define R_SERIAL0_STATUS (IO_TYPECAST_RO_BYTE 0xb0000061) -#define R_SERIAL0_STATUS__xoff_detect__BITNR 7 -#define R_SERIAL0_STATUS__xoff_detect__WIDTH 1 -#define R_SERIAL0_STATUS__xoff_detect__no_xoff 0 -#define R_SERIAL0_STATUS__xoff_detect__xoff 1 -#define R_SERIAL0_STATUS__cts___BITNR 6 -#define R_SERIAL0_STATUS__cts___WIDTH 1 -#define R_SERIAL0_STATUS__cts___active 0 -#define R_SERIAL0_STATUS__cts___inactive 1 -#define R_SERIAL0_STATUS__tr_ready__BITNR 5 -#define R_SERIAL0_STATUS__tr_ready__WIDTH 1 -#define R_SERIAL0_STATUS__tr_ready__full 0 -#define R_SERIAL0_STATUS__tr_ready__ready 1 -#define R_SERIAL0_STATUS__rxd__BITNR 4 -#define R_SERIAL0_STATUS__rxd__WIDTH 1 -#define R_SERIAL0_STATUS__overrun__BITNR 3 -#define R_SERIAL0_STATUS__overrun__WIDTH 1 -#define R_SERIAL0_STATUS__overrun__no 0 -#define R_SERIAL0_STATUS__overrun__yes 1 -#define R_SERIAL0_STATUS__par_err__BITNR 2 -#define R_SERIAL0_STATUS__par_err__WIDTH 1 -#define R_SERIAL0_STATUS__par_err__no 0 -#define R_SERIAL0_STATUS__par_err__yes 1 -#define R_SERIAL0_STATUS__framing_err__BITNR 1 -#define R_SERIAL0_STATUS__framing_err__WIDTH 1 -#define R_SERIAL0_STATUS__framing_err__no 0 -#define R_SERIAL0_STATUS__framing_err__yes 1 -#define R_SERIAL0_STATUS__data_avail__BITNR 0 -#define R_SERIAL0_STATUS__data_avail__WIDTH 1 -#define R_SERIAL0_STATUS__data_avail__no 0 -#define R_SERIAL0_STATUS__data_avail__yes 1 - -#define R_SERIAL0_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000060) -#define R_SERIAL0_REC_DATA__data_in__BITNR 0 -#define R_SERIAL0_REC_DATA__data_in__WIDTH 8 - -#define R_SERIAL0_XOFF (IO_TYPECAST_UDWORD 0xb0000064) -#define R_SERIAL0_XOFF__tx_stop__BITNR 9 -#define R_SERIAL0_XOFF__tx_stop__WIDTH 1 -#define R_SERIAL0_XOFF__tx_stop__enable 0 -#define R_SERIAL0_XOFF__tx_stop__stop 1 -#define R_SERIAL0_XOFF__auto_xoff__BITNR 8 -#define R_SERIAL0_XOFF__auto_xoff__WIDTH 1 -#define R_SERIAL0_XOFF__auto_xoff__disable 0 -#define R_SERIAL0_XOFF__auto_xoff__enable 1 -#define R_SERIAL0_XOFF__xoff_char__BITNR 0 -#define R_SERIAL0_XOFF__xoff_char__WIDTH 8 - -#define R_SERIAL1_CTRL (IO_TYPECAST_UDWORD 0xb0000068) -#define R_SERIAL1_CTRL__tr_baud__BITNR 28 -#define R_SERIAL1_CTRL__tr_baud__WIDTH 4 -#define R_SERIAL1_CTRL__tr_baud__c300Hz 0 -#define R_SERIAL1_CTRL__tr_baud__c600Hz 1 -#define R_SERIAL1_CTRL__tr_baud__c1200Hz 2 -#define R_SERIAL1_CTRL__tr_baud__c2400Hz 3 -#define R_SERIAL1_CTRL__tr_baud__c4800Hz 4 -#define R_SERIAL1_CTRL__tr_baud__c9600Hz 5 -#define R_SERIAL1_CTRL__tr_baud__c19k2Hz 6 -#define R_SERIAL1_CTRL__tr_baud__c38k4Hz 7 -#define R_SERIAL1_CTRL__tr_baud__c57k6Hz 8 -#define R_SERIAL1_CTRL__tr_baud__c115k2Hz 9 -#define R_SERIAL1_CTRL__tr_baud__c230k4Hz 10 -#define R_SERIAL1_CTRL__tr_baud__c460k8Hz 11 -#define R_SERIAL1_CTRL__tr_baud__c921k6Hz 12 -#define R_SERIAL1_CTRL__tr_baud__c1843k2Hz 13 -#define R_SERIAL1_CTRL__tr_baud__c6250kHz 14 -#define R_SERIAL1_CTRL__tr_baud__reserved 15 -#define R_SERIAL1_CTRL__rec_baud__BITNR 24 -#define R_SERIAL1_CTRL__rec_baud__WIDTH 4 -#define R_SERIAL1_CTRL__rec_baud__c300Hz 0 -#define R_SERIAL1_CTRL__rec_baud__c600Hz 1 -#define R_SERIAL1_CTRL__rec_baud__c1200Hz 2 -#define R_SERIAL1_CTRL__rec_baud__c2400Hz 3 -#define R_SERIAL1_CTRL__rec_baud__c4800Hz 4 -#define R_SERIAL1_CTRL__rec_baud__c9600Hz 5 -#define R_SERIAL1_CTRL__rec_baud__c19k2Hz 6 -#define R_SERIAL1_CTRL__rec_baud__c38k4Hz 7 -#define R_SERIAL1_CTRL__rec_baud__c57k6Hz 8 -#define R_SERIAL1_CTRL__rec_baud__c115k2Hz 9 -#define R_SERIAL1_CTRL__rec_baud__c230k4Hz 10 -#define R_SERIAL1_CTRL__rec_baud__c460k8Hz 11 -#define R_SERIAL1_CTRL__rec_baud__c921k6Hz 12 -#define R_SERIAL1_CTRL__rec_baud__c1843k2Hz 13 -#define R_SERIAL1_CTRL__rec_baud__c6250kHz 14 -#define R_SERIAL1_CTRL__rec_baud__reserved 15 -#define R_SERIAL1_CTRL__dma_err__BITNR 23 -#define R_SERIAL1_CTRL__dma_err__WIDTH 1 -#define R_SERIAL1_CTRL__dma_err__stop 0 -#define R_SERIAL1_CTRL__dma_err__ignore 1 -#define R_SERIAL1_CTRL__rec_enable__BITNR 22 -#define R_SERIAL1_CTRL__rec_enable__WIDTH 1 -#define R_SERIAL1_CTRL__rec_enable__disable 0 -#define R_SERIAL1_CTRL__rec_enable__enable 1 -#define R_SERIAL1_CTRL__rts___BITNR 21 -#define R_SERIAL1_CTRL__rts___WIDTH 1 -#define R_SERIAL1_CTRL__rts___active 0 -#define R_SERIAL1_CTRL__rts___inactive 1 -#define R_SERIAL1_CTRL__sampling__BITNR 20 -#define R_SERIAL1_CTRL__sampling__WIDTH 1 -#define R_SERIAL1_CTRL__sampling__middle 0 -#define R_SERIAL1_CTRL__sampling__majority 1 -#define R_SERIAL1_CTRL__rec_stick_par__BITNR 19 -#define R_SERIAL1_CTRL__rec_stick_par__WIDTH 1 -#define R_SERIAL1_CTRL__rec_stick_par__normal 0 -#define R_SERIAL1_CTRL__rec_stick_par__stick 1 -#define R_SERIAL1_CTRL__rec_par__BITNR 18 -#define R_SERIAL1_CTRL__rec_par__WIDTH 1 -#define R_SERIAL1_CTRL__rec_par__even 0 -#define R_SERIAL1_CTRL__rec_par__odd 1 -#define R_SERIAL1_CTRL__rec_par_en__BITNR 17 -#define R_SERIAL1_CTRL__rec_par_en__WIDTH 1 -#define R_SERIAL1_CTRL__rec_par_en__disable 0 -#define R_SERIAL1_CTRL__rec_par_en__enable 1 -#define R_SERIAL1_CTRL__rec_bitnr__BITNR 16 -#define R_SERIAL1_CTRL__rec_bitnr__WIDTH 1 -#define R_SERIAL1_CTRL__rec_bitnr__rec_8bit 0 -#define R_SERIAL1_CTRL__rec_bitnr__rec_7bit 1 -#define R_SERIAL1_CTRL__txd__BITNR 15 -#define R_SERIAL1_CTRL__txd__WIDTH 1 -#define R_SERIAL1_CTRL__tr_enable__BITNR 14 -#define R_SERIAL1_CTRL__tr_enable__WIDTH 1 -#define R_SERIAL1_CTRL__tr_enable__disable 0 -#define R_SERIAL1_CTRL__tr_enable__enable 1 -#define R_SERIAL1_CTRL__auto_cts__BITNR 13 -#define R_SERIAL1_CTRL__auto_cts__WIDTH 1 -#define R_SERIAL1_CTRL__auto_cts__disabled 0 -#define R_SERIAL1_CTRL__auto_cts__active 1 -#define R_SERIAL1_CTRL__stop_bits__BITNR 12 -#define R_SERIAL1_CTRL__stop_bits__WIDTH 1 -#define R_SERIAL1_CTRL__stop_bits__one_bit 0 -#define R_SERIAL1_CTRL__stop_bits__two_bits 1 -#define R_SERIAL1_CTRL__tr_stick_par__BITNR 11 -#define R_SERIAL1_CTRL__tr_stick_par__WIDTH 1 -#define R_SERIAL1_CTRL__tr_stick_par__normal 0 -#define R_SERIAL1_CTRL__tr_stick_par__stick 1 -#define R_SERIAL1_CTRL__tr_par__BITNR 10 -#define R_SERIAL1_CTRL__tr_par__WIDTH 1 -#define R_SERIAL1_CTRL__tr_par__even 0 -#define R_SERIAL1_CTRL__tr_par__odd 1 -#define R_SERIAL1_CTRL__tr_par_en__BITNR 9 -#define R_SERIAL1_CTRL__tr_par_en__WIDTH 1 -#define R_SERIAL1_CTRL__tr_par_en__disable 0 -#define R_SERIAL1_CTRL__tr_par_en__enable 1 -#define R_SERIAL1_CTRL__tr_bitnr__BITNR 8 -#define R_SERIAL1_CTRL__tr_bitnr__WIDTH 1 -#define R_SERIAL1_CTRL__tr_bitnr__tr_8bit 0 -#define R_SERIAL1_CTRL__tr_bitnr__tr_7bit 1 -#define R_SERIAL1_CTRL__data_out__BITNR 0 -#define R_SERIAL1_CTRL__data_out__WIDTH 8 - -#define R_SERIAL1_BAUD (IO_TYPECAST_BYTE 0xb000006b) -#define R_SERIAL1_BAUD__tr_baud__BITNR 4 -#define R_SERIAL1_BAUD__tr_baud__WIDTH 4 -#define R_SERIAL1_BAUD__tr_baud__c300Hz 0 -#define R_SERIAL1_BAUD__tr_baud__c600Hz 1 -#define R_SERIAL1_BAUD__tr_baud__c1200Hz 2 -#define R_SERIAL1_BAUD__tr_baud__c2400Hz 3 -#define R_SERIAL1_BAUD__tr_baud__c4800Hz 4 -#define R_SERIAL1_BAUD__tr_baud__c9600Hz 5 -#define R_SERIAL1_BAUD__tr_baud__c19k2Hz 6 -#define R_SERIAL1_BAUD__tr_baud__c38k4Hz 7 -#define R_SERIAL1_BAUD__tr_baud__c57k6Hz 8 -#define R_SERIAL1_BAUD__tr_baud__c115k2Hz 9 -#define R_SERIAL1_BAUD__tr_baud__c230k4Hz 10 -#define R_SERIAL1_BAUD__tr_baud__c460k8Hz 11 -#define R_SERIAL1_BAUD__tr_baud__c921k6Hz 12 -#define R_SERIAL1_BAUD__tr_baud__c1843k2Hz 13 -#define R_SERIAL1_BAUD__tr_baud__c6250kHz 14 -#define R_SERIAL1_BAUD__tr_baud__reserved 15 -#define R_SERIAL1_BAUD__rec_baud__BITNR 0 -#define R_SERIAL1_BAUD__rec_baud__WIDTH 4 -#define R_SERIAL1_BAUD__rec_baud__c300Hz 0 -#define R_SERIAL1_BAUD__rec_baud__c600Hz 1 -#define R_SERIAL1_BAUD__rec_baud__c1200Hz 2 -#define R_SERIAL1_BAUD__rec_baud__c2400Hz 3 -#define R_SERIAL1_BAUD__rec_baud__c4800Hz 4 -#define R_SERIAL1_BAUD__rec_baud__c9600Hz 5 -#define R_SERIAL1_BAUD__rec_baud__c19k2Hz 6 -#define R_SERIAL1_BAUD__rec_baud__c38k4Hz 7 -#define R_SERIAL1_BAUD__rec_baud__c57k6Hz 8 -#define R_SERIAL1_BAUD__rec_baud__c115k2Hz 9 -#define R_SERIAL1_BAUD__rec_baud__c230k4Hz 10 -#define R_SERIAL1_BAUD__rec_baud__c460k8Hz 11 -#define R_SERIAL1_BAUD__rec_baud__c921k6Hz 12 -#define R_SERIAL1_BAUD__rec_baud__c1843k2Hz 13 -#define R_SERIAL1_BAUD__rec_baud__c6250kHz 14 -#define R_SERIAL1_BAUD__rec_baud__reserved 15 - -#define R_SERIAL1_REC_CTRL (IO_TYPECAST_BYTE 0xb000006a) -#define R_SERIAL1_REC_CTRL__dma_err__BITNR 7 -#define R_SERIAL1_REC_CTRL__dma_err__WIDTH 1 -#define R_SERIAL1_REC_CTRL__dma_err__stop 0 -#define R_SERIAL1_REC_CTRL__dma_err__ignore 1 -#define R_SERIAL1_REC_CTRL__rec_enable__BITNR 6 -#define R_SERIAL1_REC_CTRL__rec_enable__WIDTH 1 -#define R_SERIAL1_REC_CTRL__rec_enable__disable 0 -#define R_SERIAL1_REC_CTRL__rec_enable__enable 1 -#define R_SERIAL1_REC_CTRL__rts___BITNR 5 -#define R_SERIAL1_REC_CTRL__rts___WIDTH 1 -#define R_SERIAL1_REC_CTRL__rts___active 0 -#define R_SERIAL1_REC_CTRL__rts___inactive 1 -#define R_SERIAL1_REC_CTRL__sampling__BITNR 4 -#define R_SERIAL1_REC_CTRL__sampling__WIDTH 1 -#define R_SERIAL1_REC_CTRL__sampling__middle 0 -#define R_SERIAL1_REC_CTRL__sampling__majority 1 -#define R_SERIAL1_REC_CTRL__rec_stick_par__BITNR 3 -#define R_SERIAL1_REC_CTRL__rec_stick_par__WIDTH 1 -#define R_SERIAL1_REC_CTRL__rec_stick_par__normal 0 -#define R_SERIAL1_REC_CTRL__rec_stick_par__stick 1 -#define R_SERIAL1_REC_CTRL__rec_par__BITNR 2 -#define R_SERIAL1_REC_CTRL__rec_par__WIDTH 1 -#define R_SERIAL1_REC_CTRL__rec_par__even 0 -#define R_SERIAL1_REC_CTRL__rec_par__odd 1 -#define R_SERIAL1_REC_CTRL__rec_par_en__BITNR 1 -#define R_SERIAL1_REC_CTRL__rec_par_en__WIDTH 1 -#define R_SERIAL1_REC_CTRL__rec_par_en__disable 0 -#define R_SERIAL1_REC_CTRL__rec_par_en__enable 1 -#define R_SERIAL1_REC_CTRL__rec_bitnr__BITNR 0 -#define R_SERIAL1_REC_CTRL__rec_bitnr__WIDTH 1 -#define R_SERIAL1_REC_CTRL__rec_bitnr__rec_8bit 0 -#define R_SERIAL1_REC_CTRL__rec_bitnr__rec_7bit 1 - -#define R_SERIAL1_TR_CTRL (IO_TYPECAST_BYTE 0xb0000069) -#define R_SERIAL1_TR_CTRL__txd__BITNR 7 -#define R_SERIAL1_TR_CTRL__txd__WIDTH 1 -#define R_SERIAL1_TR_CTRL__tr_enable__BITNR 6 -#define R_SERIAL1_TR_CTRL__tr_enable__WIDTH 1 -#define R_SERIAL1_TR_CTRL__tr_enable__disable 0 -#define R_SERIAL1_TR_CTRL__tr_enable__enable 1 -#define R_SERIAL1_TR_CTRL__auto_cts__BITNR 5 -#define R_SERIAL1_TR_CTRL__auto_cts__WIDTH 1 -#define R_SERIAL1_TR_CTRL__auto_cts__disabled 0 -#define R_SERIAL1_TR_CTRL__auto_cts__active 1 -#define R_SERIAL1_TR_CTRL__stop_bits__BITNR 4 -#define R_SERIAL1_TR_CTRL__stop_bits__WIDTH 1 -#define R_SERIAL1_TR_CTRL__stop_bits__one_bit 0 -#define R_SERIAL1_TR_CTRL__stop_bits__two_bits 1 -#define R_SERIAL1_TR_CTRL__tr_stick_par__BITNR 3 -#define R_SERIAL1_TR_CTRL__tr_stick_par__WIDTH 1 -#define R_SERIAL1_TR_CTRL__tr_stick_par__normal 0 -#define R_SERIAL1_TR_CTRL__tr_stick_par__stick 1 -#define R_SERIAL1_TR_CTRL__tr_par__BITNR 2 -#define R_SERIAL1_TR_CTRL__tr_par__WIDTH 1 -#define R_SERIAL1_TR_CTRL__tr_par__even 0 -#define R_SERIAL1_TR_CTRL__tr_par__odd 1 -#define R_SERIAL1_TR_CTRL__tr_par_en__BITNR 1 -#define R_SERIAL1_TR_CTRL__tr_par_en__WIDTH 1 -#define R_SERIAL1_TR_CTRL__tr_par_en__disable 0 -#define R_SERIAL1_TR_CTRL__tr_par_en__enable 1 -#define R_SERIAL1_TR_CTRL__tr_bitnr__BITNR 0 -#define R_SERIAL1_TR_CTRL__tr_bitnr__WIDTH 1 -#define R_SERIAL1_TR_CTRL__tr_bitnr__tr_8bit 0 -#define R_SERIAL1_TR_CTRL__tr_bitnr__tr_7bit 1 - -#define R_SERIAL1_TR_DATA (IO_TYPECAST_BYTE 0xb0000068) -#define R_SERIAL1_TR_DATA__data_out__BITNR 0 -#define R_SERIAL1_TR_DATA__data_out__WIDTH 8 - -#define R_SERIAL1_READ (IO_TYPECAST_RO_UDWORD 0xb0000068) -#define R_SERIAL1_READ__xoff_detect__BITNR 15 -#define R_SERIAL1_READ__xoff_detect__WIDTH 1 -#define R_SERIAL1_READ__xoff_detect__no_xoff 0 -#define R_SERIAL1_READ__xoff_detect__xoff 1 -#define R_SERIAL1_READ__cts___BITNR 14 -#define R_SERIAL1_READ__cts___WIDTH 1 -#define R_SERIAL1_READ__cts___active 0 -#define R_SERIAL1_READ__cts___inactive 1 -#define R_SERIAL1_READ__tr_ready__BITNR 13 -#define R_SERIAL1_READ__tr_ready__WIDTH 1 -#define R_SERIAL1_READ__tr_ready__full 0 -#define R_SERIAL1_READ__tr_ready__ready 1 -#define R_SERIAL1_READ__rxd__BITNR 12 -#define R_SERIAL1_READ__rxd__WIDTH 1 -#define R_SERIAL1_READ__overrun__BITNR 11 -#define R_SERIAL1_READ__overrun__WIDTH 1 -#define R_SERIAL1_READ__overrun__no 0 -#define R_SERIAL1_READ__overrun__yes 1 -#define R_SERIAL1_READ__par_err__BITNR 10 -#define R_SERIAL1_READ__par_err__WIDTH 1 -#define R_SERIAL1_READ__par_err__no 0 -#define R_SERIAL1_READ__par_err__yes 1 -#define R_SERIAL1_READ__framing_err__BITNR 9 -#define R_SERIAL1_READ__framing_err__WIDTH 1 -#define R_SERIAL1_READ__framing_err__no 0 -#define R_SERIAL1_READ__framing_err__yes 1 -#define R_SERIAL1_READ__data_avail__BITNR 8 -#define R_SERIAL1_READ__data_avail__WIDTH 1 -#define R_SERIAL1_READ__data_avail__no 0 -#define R_SERIAL1_READ__data_avail__yes 1 -#define R_SERIAL1_READ__data_in__BITNR 0 -#define R_SERIAL1_READ__data_in__WIDTH 8 - -#define R_SERIAL1_STATUS (IO_TYPECAST_RO_BYTE 0xb0000069) -#define R_SERIAL1_STATUS__xoff_detect__BITNR 7 -#define R_SERIAL1_STATUS__xoff_detect__WIDTH 1 -#define R_SERIAL1_STATUS__xoff_detect__no_xoff 0 -#define R_SERIAL1_STATUS__xoff_detect__xoff 1 -#define R_SERIAL1_STATUS__cts___BITNR 6 -#define R_SERIAL1_STATUS__cts___WIDTH 1 -#define R_SERIAL1_STATUS__cts___active 0 -#define R_SERIAL1_STATUS__cts___inactive 1 -#define R_SERIAL1_STATUS__tr_ready__BITNR 5 -#define R_SERIAL1_STATUS__tr_ready__WIDTH 1 -#define R_SERIAL1_STATUS__tr_ready__full 0 -#define R_SERIAL1_STATUS__tr_ready__ready 1 -#define R_SERIAL1_STATUS__rxd__BITNR 4 -#define R_SERIAL1_STATUS__rxd__WIDTH 1 -#define R_SERIAL1_STATUS__overrun__BITNR 3 -#define R_SERIAL1_STATUS__overrun__WIDTH 1 -#define R_SERIAL1_STATUS__overrun__no 0 -#define R_SERIAL1_STATUS__overrun__yes 1 -#define R_SERIAL1_STATUS__par_err__BITNR 2 -#define R_SERIAL1_STATUS__par_err__WIDTH 1 -#define R_SERIAL1_STATUS__par_err__no 0 -#define R_SERIAL1_STATUS__par_err__yes 1 -#define R_SERIAL1_STATUS__framing_err__BITNR 1 -#define R_SERIAL1_STATUS__framing_err__WIDTH 1 -#define R_SERIAL1_STATUS__framing_err__no 0 -#define R_SERIAL1_STATUS__framing_err__yes 1 -#define R_SERIAL1_STATUS__data_avail__BITNR 0 -#define R_SERIAL1_STATUS__data_avail__WIDTH 1 -#define R_SERIAL1_STATUS__data_avail__no 0 -#define R_SERIAL1_STATUS__data_avail__yes 1 - -#define R_SERIAL1_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000068) -#define R_SERIAL1_REC_DATA__data_in__BITNR 0 -#define R_SERIAL1_REC_DATA__data_in__WIDTH 8 - -#define R_SERIAL1_XOFF (IO_TYPECAST_UDWORD 0xb000006c) -#define R_SERIAL1_XOFF__tx_stop__BITNR 9 -#define R_SERIAL1_XOFF__tx_stop__WIDTH 1 -#define R_SERIAL1_XOFF__tx_stop__enable 0 -#define R_SERIAL1_XOFF__tx_stop__stop 1 -#define R_SERIAL1_XOFF__auto_xoff__BITNR 8 -#define R_SERIAL1_XOFF__auto_xoff__WIDTH 1 -#define R_SERIAL1_XOFF__auto_xoff__disable 0 -#define R_SERIAL1_XOFF__auto_xoff__enable 1 -#define R_SERIAL1_XOFF__xoff_char__BITNR 0 -#define R_SERIAL1_XOFF__xoff_char__WIDTH 8 - -#define R_SERIAL2_CTRL (IO_TYPECAST_UDWORD 0xb0000070) -#define R_SERIAL2_CTRL__tr_baud__BITNR 28 -#define R_SERIAL2_CTRL__tr_baud__WIDTH 4 -#define R_SERIAL2_CTRL__tr_baud__c300Hz 0 -#define R_SERIAL2_CTRL__tr_baud__c600Hz 1 -#define R_SERIAL2_CTRL__tr_baud__c1200Hz 2 -#define R_SERIAL2_CTRL__tr_baud__c2400Hz 3 -#define R_SERIAL2_CTRL__tr_baud__c4800Hz 4 -#define R_SERIAL2_CTRL__tr_baud__c9600Hz 5 -#define R_SERIAL2_CTRL__tr_baud__c19k2Hz 6 -#define R_SERIAL2_CTRL__tr_baud__c38k4Hz 7 -#define R_SERIAL2_CTRL__tr_baud__c57k6Hz 8 -#define R_SERIAL2_CTRL__tr_baud__c115k2Hz 9 -#define R_SERIAL2_CTRL__tr_baud__c230k4Hz 10 -#define R_SERIAL2_CTRL__tr_baud__c460k8Hz 11 -#define R_SERIAL2_CTRL__tr_baud__c921k6Hz 12 -#define R_SERIAL2_CTRL__tr_baud__c1843k2Hz 13 -#define R_SERIAL2_CTRL__tr_baud__c6250kHz 14 -#define R_SERIAL2_CTRL__tr_baud__reserved 15 -#define R_SERIAL2_CTRL__rec_baud__BITNR 24 -#define R_SERIAL2_CTRL__rec_baud__WIDTH 4 -#define R_SERIAL2_CTRL__rec_baud__c300Hz 0 -#define R_SERIAL2_CTRL__rec_baud__c600Hz 1 -#define R_SERIAL2_CTRL__rec_baud__c1200Hz 2 -#define R_SERIAL2_CTRL__rec_baud__c2400Hz 3 -#define R_SERIAL2_CTRL__rec_baud__c4800Hz 4 -#define R_SERIAL2_CTRL__rec_baud__c9600Hz 5 -#define R_SERIAL2_CTRL__rec_baud__c19k2Hz 6 -#define R_SERIAL2_CTRL__rec_baud__c38k4Hz 7 -#define R_SERIAL2_CTRL__rec_baud__c57k6Hz 8 -#define R_SERIAL2_CTRL__rec_baud__c115k2Hz 9 -#define R_SERIAL2_CTRL__rec_baud__c230k4Hz 10 -#define R_SERIAL2_CTRL__rec_baud__c460k8Hz 11 -#define R_SERIAL2_CTRL__rec_baud__c921k6Hz 12 -#define R_SERIAL2_CTRL__rec_baud__c1843k2Hz 13 -#define R_SERIAL2_CTRL__rec_baud__c6250kHz 14 -#define R_SERIAL2_CTRL__rec_baud__reserved 15 -#define R_SERIAL2_CTRL__dma_err__BITNR 23 -#define R_SERIAL2_CTRL__dma_err__WIDTH 1 -#define R_SERIAL2_CTRL__dma_err__stop 0 -#define R_SERIAL2_CTRL__dma_err__ignore 1 -#define R_SERIAL2_CTRL__rec_enable__BITNR 22 -#define R_SERIAL2_CTRL__rec_enable__WIDTH 1 -#define R_SERIAL2_CTRL__rec_enable__disable 0 -#define R_SERIAL2_CTRL__rec_enable__enable 1 -#define R_SERIAL2_CTRL__rts___BITNR 21 -#define R_SERIAL2_CTRL__rts___WIDTH 1 -#define R_SERIAL2_CTRL__rts___active 0 -#define R_SERIAL2_CTRL__rts___inactive 1 -#define R_SERIAL2_CTRL__sampling__BITNR 20 -#define R_SERIAL2_CTRL__sampling__WIDTH 1 -#define R_SERIAL2_CTRL__sampling__middle 0 -#define R_SERIAL2_CTRL__sampling__majority 1 -#define R_SERIAL2_CTRL__rec_stick_par__BITNR 19 -#define R_SERIAL2_CTRL__rec_stick_par__WIDTH 1 -#define R_SERIAL2_CTRL__rec_stick_par__normal 0 -#define R_SERIAL2_CTRL__rec_stick_par__stick 1 -#define R_SERIAL2_CTRL__rec_par__BITNR 18 -#define R_SERIAL2_CTRL__rec_par__WIDTH 1 -#define R_SERIAL2_CTRL__rec_par__even 0 -#define R_SERIAL2_CTRL__rec_par__odd 1 -#define R_SERIAL2_CTRL__rec_par_en__BITNR 17 -#define R_SERIAL2_CTRL__rec_par_en__WIDTH 1 -#define R_SERIAL2_CTRL__rec_par_en__disable 0 -#define R_SERIAL2_CTRL__rec_par_en__enable 1 -#define R_SERIAL2_CTRL__rec_bitnr__BITNR 16 -#define R_SERIAL2_CTRL__rec_bitnr__WIDTH 1 -#define R_SERIAL2_CTRL__rec_bitnr__rec_8bit 0 -#define R_SERIAL2_CTRL__rec_bitnr__rec_7bit 1 -#define R_SERIAL2_CTRL__txd__BITNR 15 -#define R_SERIAL2_CTRL__txd__WIDTH 1 -#define R_SERIAL2_CTRL__tr_enable__BITNR 14 -#define R_SERIAL2_CTRL__tr_enable__WIDTH 1 -#define R_SERIAL2_CTRL__tr_enable__disable 0 -#define R_SERIAL2_CTRL__tr_enable__enable 1 -#define R_SERIAL2_CTRL__auto_cts__BITNR 13 -#define R_SERIAL2_CTRL__auto_cts__WIDTH 1 -#define R_SERIAL2_CTRL__auto_cts__disabled 0 -#define R_SERIAL2_CTRL__auto_cts__active 1 -#define R_SERIAL2_CTRL__stop_bits__BITNR 12 -#define R_SERIAL2_CTRL__stop_bits__WIDTH 1 -#define R_SERIAL2_CTRL__stop_bits__one_bit 0 -#define R_SERIAL2_CTRL__stop_bits__two_bits 1 -#define R_SERIAL2_CTRL__tr_stick_par__BITNR 11 -#define R_SERIAL2_CTRL__tr_stick_par__WIDTH 1 -#define R_SERIAL2_CTRL__tr_stick_par__normal 0 -#define R_SERIAL2_CTRL__tr_stick_par__stick 1 -#define R_SERIAL2_CTRL__tr_par__BITNR 10 -#define R_SERIAL2_CTRL__tr_par__WIDTH 1 -#define R_SERIAL2_CTRL__tr_par__even 0 -#define R_SERIAL2_CTRL__tr_par__odd 1 -#define R_SERIAL2_CTRL__tr_par_en__BITNR 9 -#define R_SERIAL2_CTRL__tr_par_en__WIDTH 1 -#define R_SERIAL2_CTRL__tr_par_en__disable 0 -#define R_SERIAL2_CTRL__tr_par_en__enable 1 -#define R_SERIAL2_CTRL__tr_bitnr__BITNR 8 -#define R_SERIAL2_CTRL__tr_bitnr__WIDTH 1 -#define R_SERIAL2_CTRL__tr_bitnr__tr_8bit 0 -#define R_SERIAL2_CTRL__tr_bitnr__tr_7bit 1 -#define R_SERIAL2_CTRL__data_out__BITNR 0 -#define R_SERIAL2_CTRL__data_out__WIDTH 8 - -#define R_SERIAL2_BAUD (IO_TYPECAST_BYTE 0xb0000073) -#define R_SERIAL2_BAUD__tr_baud__BITNR 4 -#define R_SERIAL2_BAUD__tr_baud__WIDTH 4 -#define R_SERIAL2_BAUD__tr_baud__c300Hz 0 -#define R_SERIAL2_BAUD__tr_baud__c600Hz 1 -#define R_SERIAL2_BAUD__tr_baud__c1200Hz 2 -#define R_SERIAL2_BAUD__tr_baud__c2400Hz 3 -#define R_SERIAL2_BAUD__tr_baud__c4800Hz 4 -#define R_SERIAL2_BAUD__tr_baud__c9600Hz 5 -#define R_SERIAL2_BAUD__tr_baud__c19k2Hz 6 -#define R_SERIAL2_BAUD__tr_baud__c38k4Hz 7 -#define R_SERIAL2_BAUD__tr_baud__c57k6Hz 8 -#define R_SERIAL2_BAUD__tr_baud__c115k2Hz 9 -#define R_SERIAL2_BAUD__tr_baud__c230k4Hz 10 -#define R_SERIAL2_BAUD__tr_baud__c460k8Hz 11 -#define R_SERIAL2_BAUD__tr_baud__c921k6Hz 12 -#define R_SERIAL2_BAUD__tr_baud__c1843k2Hz 13 -#define R_SERIAL2_BAUD__tr_baud__c6250kHz 14 -#define R_SERIAL2_BAUD__tr_baud__reserved 15 -#define R_SERIAL2_BAUD__rec_baud__BITNR 0 -#define R_SERIAL2_BAUD__rec_baud__WIDTH 4 -#define R_SERIAL2_BAUD__rec_baud__c300Hz 0 -#define R_SERIAL2_BAUD__rec_baud__c600Hz 1 -#define R_SERIAL2_BAUD__rec_baud__c1200Hz 2 -#define R_SERIAL2_BAUD__rec_baud__c2400Hz 3 -#define R_SERIAL2_BAUD__rec_baud__c4800Hz 4 -#define R_SERIAL2_BAUD__rec_baud__c9600Hz 5 -#define R_SERIAL2_BAUD__rec_baud__c19k2Hz 6 -#define R_SERIAL2_BAUD__rec_baud__c38k4Hz 7 -#define R_SERIAL2_BAUD__rec_baud__c57k6Hz 8 -#define R_SERIAL2_BAUD__rec_baud__c115k2Hz 9 -#define R_SERIAL2_BAUD__rec_baud__c230k4Hz 10 -#define R_SERIAL2_BAUD__rec_baud__c460k8Hz 11 -#define R_SERIAL2_BAUD__rec_baud__c921k6Hz 12 -#define R_SERIAL2_BAUD__rec_baud__c1843k2Hz 13 -#define R_SERIAL2_BAUD__rec_baud__c6250kHz 14 -#define R_SERIAL2_BAUD__rec_baud__reserved 15 - -#define R_SERIAL2_REC_CTRL (IO_TYPECAST_BYTE 0xb0000072) -#define R_SERIAL2_REC_CTRL__dma_err__BITNR 7 -#define R_SERIAL2_REC_CTRL__dma_err__WIDTH 1 -#define R_SERIAL2_REC_CTRL__dma_err__stop 0 -#define R_SERIAL2_REC_CTRL__dma_err__ignore 1 -#define R_SERIAL2_REC_CTRL__rec_enable__BITNR 6 -#define R_SERIAL2_REC_CTRL__rec_enable__WIDTH 1 -#define R_SERIAL2_REC_CTRL__rec_enable__disable 0 -#define R_SERIAL2_REC_CTRL__rec_enable__enable 1 -#define R_SERIAL2_REC_CTRL__rts___BITNR 5 -#define R_SERIAL2_REC_CTRL__rts___WIDTH 1 -#define R_SERIAL2_REC_CTRL__rts___active 0 -#define R_SERIAL2_REC_CTRL__rts___inactive 1 -#define R_SERIAL2_REC_CTRL__sampling__BITNR 4 -#define R_SERIAL2_REC_CTRL__sampling__WIDTH 1 -#define R_SERIAL2_REC_CTRL__sampling__middle 0 -#define R_SERIAL2_REC_CTRL__sampling__majority 1 -#define R_SERIAL2_REC_CTRL__rec_stick_par__BITNR 3 -#define R_SERIAL2_REC_CTRL__rec_stick_par__WIDTH 1 -#define R_SERIAL2_REC_CTRL__rec_stick_par__normal 0 -#define R_SERIAL2_REC_CTRL__rec_stick_par__stick 1 -#define R_SERIAL2_REC_CTRL__rec_par__BITNR 2 -#define R_SERIAL2_REC_CTRL__rec_par__WIDTH 1 -#define R_SERIAL2_REC_CTRL__rec_par__even 0 -#define R_SERIAL2_REC_CTRL__rec_par__odd 1 -#define R_SERIAL2_REC_CTRL__rec_par_en__BITNR 1 -#define R_SERIAL2_REC_CTRL__rec_par_en__WIDTH 1 -#define R_SERIAL2_REC_CTRL__rec_par_en__disable 0 -#define R_SERIAL2_REC_CTRL__rec_par_en__enable 1 -#define R_SERIAL2_REC_CTRL__rec_bitnr__BITNR 0 -#define R_SERIAL2_REC_CTRL__rec_bitnr__WIDTH 1 -#define R_SERIAL2_REC_CTRL__rec_bitnr__rec_8bit 0 -#define R_SERIAL2_REC_CTRL__rec_bitnr__rec_7bit 1 - -#define R_SERIAL2_TR_CTRL (IO_TYPECAST_BYTE 0xb0000071) -#define R_SERIAL2_TR_CTRL__txd__BITNR 7 -#define R_SERIAL2_TR_CTRL__txd__WIDTH 1 -#define R_SERIAL2_TR_CTRL__tr_enable__BITNR 6 -#define R_SERIAL2_TR_CTRL__tr_enable__WIDTH 1 -#define R_SERIAL2_TR_CTRL__tr_enable__disable 0 -#define R_SERIAL2_TR_CTRL__tr_enable__enable 1 -#define R_SERIAL2_TR_CTRL__auto_cts__BITNR 5 -#define R_SERIAL2_TR_CTRL__auto_cts__WIDTH 1 -#define R_SERIAL2_TR_CTRL__auto_cts__disabled 0 -#define R_SERIAL2_TR_CTRL__auto_cts__active 1 -#define R_SERIAL2_TR_CTRL__stop_bits__BITNR 4 -#define R_SERIAL2_TR_CTRL__stop_bits__WIDTH 1 -#define R_SERIAL2_TR_CTRL__stop_bits__one_bit 0 -#define R_SERIAL2_TR_CTRL__stop_bits__two_bits 1 -#define R_SERIAL2_TR_CTRL__tr_stick_par__BITNR 3 -#define R_SERIAL2_TR_CTRL__tr_stick_par__WIDTH 1 -#define R_SERIAL2_TR_CTRL__tr_stick_par__normal 0 -#define R_SERIAL2_TR_CTRL__tr_stick_par__stick 1 -#define R_SERIAL2_TR_CTRL__tr_par__BITNR 2 -#define R_SERIAL2_TR_CTRL__tr_par__WIDTH 1 -#define R_SERIAL2_TR_CTRL__tr_par__even 0 -#define R_SERIAL2_TR_CTRL__tr_par__odd 1 -#define R_SERIAL2_TR_CTRL__tr_par_en__BITNR 1 -#define R_SERIAL2_TR_CTRL__tr_par_en__WIDTH 1 -#define R_SERIAL2_TR_CTRL__tr_par_en__disable 0 -#define R_SERIAL2_TR_CTRL__tr_par_en__enable 1 -#define R_SERIAL2_TR_CTRL__tr_bitnr__BITNR 0 -#define R_SERIAL2_TR_CTRL__tr_bitnr__WIDTH 1 -#define R_SERIAL2_TR_CTRL__tr_bitnr__tr_8bit 0 -#define R_SERIAL2_TR_CTRL__tr_bitnr__tr_7bit 1 - -#define R_SERIAL2_TR_DATA (IO_TYPECAST_BYTE 0xb0000070) -#define R_SERIAL2_TR_DATA__data_out__BITNR 0 -#define R_SERIAL2_TR_DATA__data_out__WIDTH 8 - -#define R_SERIAL2_READ (IO_TYPECAST_RO_UDWORD 0xb0000070) -#define R_SERIAL2_READ__xoff_detect__BITNR 15 -#define R_SERIAL2_READ__xoff_detect__WIDTH 1 -#define R_SERIAL2_READ__xoff_detect__no_xoff 0 -#define R_SERIAL2_READ__xoff_detect__xoff 1 -#define R_SERIAL2_READ__cts___BITNR 14 -#define R_SERIAL2_READ__cts___WIDTH 1 -#define R_SERIAL2_READ__cts___active 0 -#define R_SERIAL2_READ__cts___inactive 1 -#define R_SERIAL2_READ__tr_ready__BITNR 13 -#define R_SERIAL2_READ__tr_ready__WIDTH 1 -#define R_SERIAL2_READ__tr_ready__full 0 -#define R_SERIAL2_READ__tr_ready__ready 1 -#define R_SERIAL2_READ__rxd__BITNR 12 -#define R_SERIAL2_READ__rxd__WIDTH 1 -#define R_SERIAL2_READ__overrun__BITNR 11 -#define R_SERIAL2_READ__overrun__WIDTH 1 -#define R_SERIAL2_READ__overrun__no 0 -#define R_SERIAL2_READ__overrun__yes 1 -#define R_SERIAL2_READ__par_err__BITNR 10 -#define R_SERIAL2_READ__par_err__WIDTH 1 -#define R_SERIAL2_READ__par_err__no 0 -#define R_SERIAL2_READ__par_err__yes 1 -#define R_SERIAL2_READ__framing_err__BITNR 9 -#define R_SERIAL2_READ__framing_err__WIDTH 1 -#define R_SERIAL2_READ__framing_err__no 0 -#define R_SERIAL2_READ__framing_err__yes 1 -#define R_SERIAL2_READ__data_avail__BITNR 8 -#define R_SERIAL2_READ__data_avail__WIDTH 1 -#define R_SERIAL2_READ__data_avail__no 0 -#define R_SERIAL2_READ__data_avail__yes 1 -#define R_SERIAL2_READ__data_in__BITNR 0 -#define R_SERIAL2_READ__data_in__WIDTH 8 - -#define R_SERIAL2_STATUS (IO_TYPECAST_RO_BYTE 0xb0000071) -#define R_SERIAL2_STATUS__xoff_detect__BITNR 7 -#define R_SERIAL2_STATUS__xoff_detect__WIDTH 1 -#define R_SERIAL2_STATUS__xoff_detect__no_xoff 0 -#define R_SERIAL2_STATUS__xoff_detect__xoff 1 -#define R_SERIAL2_STATUS__cts___BITNR 6 -#define R_SERIAL2_STATUS__cts___WIDTH 1 -#define R_SERIAL2_STATUS__cts___active 0 -#define R_SERIAL2_STATUS__cts___inactive 1 -#define R_SERIAL2_STATUS__tr_ready__BITNR 5 -#define R_SERIAL2_STATUS__tr_ready__WIDTH 1 -#define R_SERIAL2_STATUS__tr_ready__full 0 -#define R_SERIAL2_STATUS__tr_ready__ready 1 -#define R_SERIAL2_STATUS__rxd__BITNR 4 -#define R_SERIAL2_STATUS__rxd__WIDTH 1 -#define R_SERIAL2_STATUS__overrun__BITNR 3 -#define R_SERIAL2_STATUS__overrun__WIDTH 1 -#define R_SERIAL2_STATUS__overrun__no 0 -#define R_SERIAL2_STATUS__overrun__yes 1 -#define R_SERIAL2_STATUS__par_err__BITNR 2 -#define R_SERIAL2_STATUS__par_err__WIDTH 1 -#define R_SERIAL2_STATUS__par_err__no 0 -#define R_SERIAL2_STATUS__par_err__yes 1 -#define R_SERIAL2_STATUS__framing_err__BITNR 1 -#define R_SERIAL2_STATUS__framing_err__WIDTH 1 -#define R_SERIAL2_STATUS__framing_err__no 0 -#define R_SERIAL2_STATUS__framing_err__yes 1 -#define R_SERIAL2_STATUS__data_avail__BITNR 0 -#define R_SERIAL2_STATUS__data_avail__WIDTH 1 -#define R_SERIAL2_STATUS__data_avail__no 0 -#define R_SERIAL2_STATUS__data_avail__yes 1 - -#define R_SERIAL2_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000070) -#define R_SERIAL2_REC_DATA__data_in__BITNR 0 -#define R_SERIAL2_REC_DATA__data_in__WIDTH 8 - -#define R_SERIAL2_XOFF (IO_TYPECAST_UDWORD 0xb0000074) -#define R_SERIAL2_XOFF__tx_stop__BITNR 9 -#define R_SERIAL2_XOFF__tx_stop__WIDTH 1 -#define R_SERIAL2_XOFF__tx_stop__enable 0 -#define R_SERIAL2_XOFF__tx_stop__stop 1 -#define R_SERIAL2_XOFF__auto_xoff__BITNR 8 -#define R_SERIAL2_XOFF__auto_xoff__WIDTH 1 -#define R_SERIAL2_XOFF__auto_xoff__disable 0 -#define R_SERIAL2_XOFF__auto_xoff__enable 1 -#define R_SERIAL2_XOFF__xoff_char__BITNR 0 -#define R_SERIAL2_XOFF__xoff_char__WIDTH 8 - -#define R_SERIAL3_CTRL (IO_TYPECAST_UDWORD 0xb0000078) -#define R_SERIAL3_CTRL__tr_baud__BITNR 28 -#define R_SERIAL3_CTRL__tr_baud__WIDTH 4 -#define R_SERIAL3_CTRL__tr_baud__c300Hz 0 -#define R_SERIAL3_CTRL__tr_baud__c600Hz 1 -#define R_SERIAL3_CTRL__tr_baud__c1200Hz 2 -#define R_SERIAL3_CTRL__tr_baud__c2400Hz 3 -#define R_SERIAL3_CTRL__tr_baud__c4800Hz 4 -#define R_SERIAL3_CTRL__tr_baud__c9600Hz 5 -#define R_SERIAL3_CTRL__tr_baud__c19k2Hz 6 -#define R_SERIAL3_CTRL__tr_baud__c38k4Hz 7 -#define R_SERIAL3_CTRL__tr_baud__c57k6Hz 8 -#define R_SERIAL3_CTRL__tr_baud__c115k2Hz 9 -#define R_SERIAL3_CTRL__tr_baud__c230k4Hz 10 -#define R_SERIAL3_CTRL__tr_baud__c460k8Hz 11 -#define R_SERIAL3_CTRL__tr_baud__c921k6Hz 12 -#define R_SERIAL3_CTRL__tr_baud__c1843k2Hz 13 -#define R_SERIAL3_CTRL__tr_baud__c6250kHz 14 -#define R_SERIAL3_CTRL__tr_baud__reserved 15 -#define R_SERIAL3_CTRL__rec_baud__BITNR 24 -#define R_SERIAL3_CTRL__rec_baud__WIDTH 4 -#define R_SERIAL3_CTRL__rec_baud__c300Hz 0 -#define R_SERIAL3_CTRL__rec_baud__c600Hz 1 -#define R_SERIAL3_CTRL__rec_baud__c1200Hz 2 -#define R_SERIAL3_CTRL__rec_baud__c2400Hz 3 -#define R_SERIAL3_CTRL__rec_baud__c4800Hz 4 -#define R_SERIAL3_CTRL__rec_baud__c9600Hz 5 -#define R_SERIAL3_CTRL__rec_baud__c19k2Hz 6 -#define R_SERIAL3_CTRL__rec_baud__c38k4Hz 7 -#define R_SERIAL3_CTRL__rec_baud__c57k6Hz 8 -#define R_SERIAL3_CTRL__rec_baud__c115k2Hz 9 -#define R_SERIAL3_CTRL__rec_baud__c230k4Hz 10 -#define R_SERIAL3_CTRL__rec_baud__c460k8Hz 11 -#define R_SERIAL3_CTRL__rec_baud__c921k6Hz 12 -#define R_SERIAL3_CTRL__rec_baud__c1843k2Hz 13 -#define R_SERIAL3_CTRL__rec_baud__c6250kHz 14 -#define R_SERIAL3_CTRL__rec_baud__reserved 15 -#define R_SERIAL3_CTRL__dma_err__BITNR 23 -#define R_SERIAL3_CTRL__dma_err__WIDTH 1 -#define R_SERIAL3_CTRL__dma_err__stop 0 -#define R_SERIAL3_CTRL__dma_err__ignore 1 -#define R_SERIAL3_CTRL__rec_enable__BITNR 22 -#define R_SERIAL3_CTRL__rec_enable__WIDTH 1 -#define R_SERIAL3_CTRL__rec_enable__disable 0 -#define R_SERIAL3_CTRL__rec_enable__enable 1 -#define R_SERIAL3_CTRL__rts___BITNR 21 -#define R_SERIAL3_CTRL__rts___WIDTH 1 -#define R_SERIAL3_CTRL__rts___active 0 -#define R_SERIAL3_CTRL__rts___inactive 1 -#define R_SERIAL3_CTRL__sampling__BITNR 20 -#define R_SERIAL3_CTRL__sampling__WIDTH 1 -#define R_SERIAL3_CTRL__sampling__middle 0 -#define R_SERIAL3_CTRL__sampling__majority 1 -#define R_SERIAL3_CTRL__rec_stick_par__BITNR 19 -#define R_SERIAL3_CTRL__rec_stick_par__WIDTH 1 -#define R_SERIAL3_CTRL__rec_stick_par__normal 0 -#define R_SERIAL3_CTRL__rec_stick_par__stick 1 -#define R_SERIAL3_CTRL__rec_par__BITNR 18 -#define R_SERIAL3_CTRL__rec_par__WIDTH 1 -#define R_SERIAL3_CTRL__rec_par__even 0 -#define R_SERIAL3_CTRL__rec_par__odd 1 -#define R_SERIAL3_CTRL__rec_par_en__BITNR 17 -#define R_SERIAL3_CTRL__rec_par_en__WIDTH 1 -#define R_SERIAL3_CTRL__rec_par_en__disable 0 -#define R_SERIAL3_CTRL__rec_par_en__enable 1 -#define R_SERIAL3_CTRL__rec_bitnr__BITNR 16 -#define R_SERIAL3_CTRL__rec_bitnr__WIDTH 1 -#define R_SERIAL3_CTRL__rec_bitnr__rec_8bit 0 -#define R_SERIAL3_CTRL__rec_bitnr__rec_7bit 1 -#define R_SERIAL3_CTRL__txd__BITNR 15 -#define R_SERIAL3_CTRL__txd__WIDTH 1 -#define R_SERIAL3_CTRL__tr_enable__BITNR 14 -#define R_SERIAL3_CTRL__tr_enable__WIDTH 1 -#define R_SERIAL3_CTRL__tr_enable__disable 0 -#define R_SERIAL3_CTRL__tr_enable__enable 1 -#define R_SERIAL3_CTRL__auto_cts__BITNR 13 -#define R_SERIAL3_CTRL__auto_cts__WIDTH 1 -#define R_SERIAL3_CTRL__auto_cts__disabled 0 -#define R_SERIAL3_CTRL__auto_cts__active 1 -#define R_SERIAL3_CTRL__stop_bits__BITNR 12 -#define R_SERIAL3_CTRL__stop_bits__WIDTH 1 -#define R_SERIAL3_CTRL__stop_bits__one_bit 0 -#define R_SERIAL3_CTRL__stop_bits__two_bits 1 -#define R_SERIAL3_CTRL__tr_stick_par__BITNR 11 -#define R_SERIAL3_CTRL__tr_stick_par__WIDTH 1 -#define R_SERIAL3_CTRL__tr_stick_par__normal 0 -#define R_SERIAL3_CTRL__tr_stick_par__stick 1 -#define R_SERIAL3_CTRL__tr_par__BITNR 10 -#define R_SERIAL3_CTRL__tr_par__WIDTH 1 -#define R_SERIAL3_CTRL__tr_par__even 0 -#define R_SERIAL3_CTRL__tr_par__odd 1 -#define R_SERIAL3_CTRL__tr_par_en__BITNR 9 -#define R_SERIAL3_CTRL__tr_par_en__WIDTH 1 -#define R_SERIAL3_CTRL__tr_par_en__disable 0 -#define R_SERIAL3_CTRL__tr_par_en__enable 1 -#define R_SERIAL3_CTRL__tr_bitnr__BITNR 8 -#define R_SERIAL3_CTRL__tr_bitnr__WIDTH 1 -#define R_SERIAL3_CTRL__tr_bitnr__tr_8bit 0 -#define R_SERIAL3_CTRL__tr_bitnr__tr_7bit 1 -#define R_SERIAL3_CTRL__data_out__BITNR 0 -#define R_SERIAL3_CTRL__data_out__WIDTH 8 - -#define R_SERIAL3_BAUD (IO_TYPECAST_BYTE 0xb000007b) -#define R_SERIAL3_BAUD__tr_baud__BITNR 4 -#define R_SERIAL3_BAUD__tr_baud__WIDTH 4 -#define R_SERIAL3_BAUD__tr_baud__c300Hz 0 -#define R_SERIAL3_BAUD__tr_baud__c600Hz 1 -#define R_SERIAL3_BAUD__tr_baud__c1200Hz 2 -#define R_SERIAL3_BAUD__tr_baud__c2400Hz 3 -#define R_SERIAL3_BAUD__tr_baud__c4800Hz 4 -#define R_SERIAL3_BAUD__tr_baud__c9600Hz 5 -#define R_SERIAL3_BAUD__tr_baud__c19k2Hz 6 -#define R_SERIAL3_BAUD__tr_baud__c38k4Hz 7 -#define R_SERIAL3_BAUD__tr_baud__c57k6Hz 8 -#define R_SERIAL3_BAUD__tr_baud__c115k2Hz 9 -#define R_SERIAL3_BAUD__tr_baud__c230k4Hz 10 -#define R_SERIAL3_BAUD__tr_baud__c460k8Hz 11 -#define R_SERIAL3_BAUD__tr_baud__c921k6Hz 12 -#define R_SERIAL3_BAUD__tr_baud__c1843k2Hz 13 -#define R_SERIAL3_BAUD__tr_baud__c6250kHz 14 -#define R_SERIAL3_BAUD__tr_baud__reserved 15 -#define R_SERIAL3_BAUD__rec_baud__BITNR 0 -#define R_SERIAL3_BAUD__rec_baud__WIDTH 4 -#define R_SERIAL3_BAUD__rec_baud__c300Hz 0 -#define R_SERIAL3_BAUD__rec_baud__c600Hz 1 -#define R_SERIAL3_BAUD__rec_baud__c1200Hz 2 -#define R_SERIAL3_BAUD__rec_baud__c2400Hz 3 -#define R_SERIAL3_BAUD__rec_baud__c4800Hz 4 -#define R_SERIAL3_BAUD__rec_baud__c9600Hz 5 -#define R_SERIAL3_BAUD__rec_baud__c19k2Hz 6 -#define R_SERIAL3_BAUD__rec_baud__c38k4Hz 7 -#define R_SERIAL3_BAUD__rec_baud__c57k6Hz 8 -#define R_SERIAL3_BAUD__rec_baud__c115k2Hz 9 -#define R_SERIAL3_BAUD__rec_baud__c230k4Hz 10 -#define R_SERIAL3_BAUD__rec_baud__c460k8Hz 11 -#define R_SERIAL3_BAUD__rec_baud__c921k6Hz 12 -#define R_SERIAL3_BAUD__rec_baud__c1843k2Hz 13 -#define R_SERIAL3_BAUD__rec_baud__c6250kHz 14 -#define R_SERIAL3_BAUD__rec_baud__reserved 15 - -#define R_SERIAL3_REC_CTRL (IO_TYPECAST_BYTE 0xb000007a) -#define R_SERIAL3_REC_CTRL__dma_err__BITNR 7 -#define R_SERIAL3_REC_CTRL__dma_err__WIDTH 1 -#define R_SERIAL3_REC_CTRL__dma_err__stop 0 -#define R_SERIAL3_REC_CTRL__dma_err__ignore 1 -#define R_SERIAL3_REC_CTRL__rec_enable__BITNR 6 -#define R_SERIAL3_REC_CTRL__rec_enable__WIDTH 1 -#define R_SERIAL3_REC_CTRL__rec_enable__disable 0 -#define R_SERIAL3_REC_CTRL__rec_enable__enable 1 -#define R_SERIAL3_REC_CTRL__rts___BITNR 5 -#define R_SERIAL3_REC_CTRL__rts___WIDTH 1 -#define R_SERIAL3_REC_CTRL__rts___active 0 -#define R_SERIAL3_REC_CTRL__rts___inactive 1 -#define R_SERIAL3_REC_CTRL__sampling__BITNR 4 -#define R_SERIAL3_REC_CTRL__sampling__WIDTH 1 -#define R_SERIAL3_REC_CTRL__sampling__middle 0 -#define R_SERIAL3_REC_CTRL__sampling__majority 1 -#define R_SERIAL3_REC_CTRL__rec_stick_par__BITNR 3 -#define R_SERIAL3_REC_CTRL__rec_stick_par__WIDTH 1 -#define R_SERIAL3_REC_CTRL__rec_stick_par__normal 0 -#define R_SERIAL3_REC_CTRL__rec_stick_par__stick 1 -#define R_SERIAL3_REC_CTRL__rec_par__BITNR 2 -#define R_SERIAL3_REC_CTRL__rec_par__WIDTH 1 -#define R_SERIAL3_REC_CTRL__rec_par__even 0 -#define R_SERIAL3_REC_CTRL__rec_par__odd 1 -#define R_SERIAL3_REC_CTRL__rec_par_en__BITNR 1 -#define R_SERIAL3_REC_CTRL__rec_par_en__WIDTH 1 -#define R_SERIAL3_REC_CTRL__rec_par_en__disable 0 -#define R_SERIAL3_REC_CTRL__rec_par_en__enable 1 -#define R_SERIAL3_REC_CTRL__rec_bitnr__BITNR 0 -#define R_SERIAL3_REC_CTRL__rec_bitnr__WIDTH 1 -#define R_SERIAL3_REC_CTRL__rec_bitnr__rec_8bit 0 -#define R_SERIAL3_REC_CTRL__rec_bitnr__rec_7bit 1 - -#define R_SERIAL3_TR_CTRL (IO_TYPECAST_BYTE 0xb0000079) -#define R_SERIAL3_TR_CTRL__txd__BITNR 7 -#define R_SERIAL3_TR_CTRL__txd__WIDTH 1 -#define R_SERIAL3_TR_CTRL__tr_enable__BITNR 6 -#define R_SERIAL3_TR_CTRL__tr_enable__WIDTH 1 -#define R_SERIAL3_TR_CTRL__tr_enable__disable 0 -#define R_SERIAL3_TR_CTRL__tr_enable__enable 1 -#define R_SERIAL3_TR_CTRL__auto_cts__BITNR 5 -#define R_SERIAL3_TR_CTRL__auto_cts__WIDTH 1 -#define R_SERIAL3_TR_CTRL__auto_cts__disabled 0 -#define R_SERIAL3_TR_CTRL__auto_cts__active 1 -#define R_SERIAL3_TR_CTRL__stop_bits__BITNR 4 -#define R_SERIAL3_TR_CTRL__stop_bits__WIDTH 1 -#define R_SERIAL3_TR_CTRL__stop_bits__one_bit 0 -#define R_SERIAL3_TR_CTRL__stop_bits__two_bits 1 -#define R_SERIAL3_TR_CTRL__tr_stick_par__BITNR 3 -#define R_SERIAL3_TR_CTRL__tr_stick_par__WIDTH 1 -#define R_SERIAL3_TR_CTRL__tr_stick_par__normal 0 -#define R_SERIAL3_TR_CTRL__tr_stick_par__stick 1 -#define R_SERIAL3_TR_CTRL__tr_par__BITNR 2 -#define R_SERIAL3_TR_CTRL__tr_par__WIDTH 1 -#define R_SERIAL3_TR_CTRL__tr_par__even 0 -#define R_SERIAL3_TR_CTRL__tr_par__odd 1 -#define R_SERIAL3_TR_CTRL__tr_par_en__BITNR 1 -#define R_SERIAL3_TR_CTRL__tr_par_en__WIDTH 1 -#define R_SERIAL3_TR_CTRL__tr_par_en__disable 0 -#define R_SERIAL3_TR_CTRL__tr_par_en__enable 1 -#define R_SERIAL3_TR_CTRL__tr_bitnr__BITNR 0 -#define R_SERIAL3_TR_CTRL__tr_bitnr__WIDTH 1 -#define R_SERIAL3_TR_CTRL__tr_bitnr__tr_8bit 0 -#define R_SERIAL3_TR_CTRL__tr_bitnr__tr_7bit 1 - -#define R_SERIAL3_TR_DATA (IO_TYPECAST_BYTE 0xb0000078) -#define R_SERIAL3_TR_DATA__data_out__BITNR 0 -#define R_SERIAL3_TR_DATA__data_out__WIDTH 8 - -#define R_SERIAL3_READ (IO_TYPECAST_RO_UDWORD 0xb0000078) -#define R_SERIAL3_READ__xoff_detect__BITNR 15 -#define R_SERIAL3_READ__xoff_detect__WIDTH 1 -#define R_SERIAL3_READ__xoff_detect__no_xoff 0 -#define R_SERIAL3_READ__xoff_detect__xoff 1 -#define R_SERIAL3_READ__cts___BITNR 14 -#define R_SERIAL3_READ__cts___WIDTH 1 -#define R_SERIAL3_READ__cts___active 0 -#define R_SERIAL3_READ__cts___inactive 1 -#define R_SERIAL3_READ__tr_ready__BITNR 13 -#define R_SERIAL3_READ__tr_ready__WIDTH 1 -#define R_SERIAL3_READ__tr_ready__full 0 -#define R_SERIAL3_READ__tr_ready__ready 1 -#define R_SERIAL3_READ__rxd__BITNR 12 -#define R_SERIAL3_READ__rxd__WIDTH 1 -#define R_SERIAL3_READ__overrun__BITNR 11 -#define R_SERIAL3_READ__overrun__WIDTH 1 -#define R_SERIAL3_READ__overrun__no 0 -#define R_SERIAL3_READ__overrun__yes 1 -#define R_SERIAL3_READ__par_err__BITNR 10 -#define R_SERIAL3_READ__par_err__WIDTH 1 -#define R_SERIAL3_READ__par_err__no 0 -#define R_SERIAL3_READ__par_err__yes 1 -#define R_SERIAL3_READ__framing_err__BITNR 9 -#define R_SERIAL3_READ__framing_err__WIDTH 1 -#define R_SERIAL3_READ__framing_err__no 0 -#define R_SERIAL3_READ__framing_err__yes 1 -#define R_SERIAL3_READ__data_avail__BITNR 8 -#define R_SERIAL3_READ__data_avail__WIDTH 1 -#define R_SERIAL3_READ__data_avail__no 0 -#define R_SERIAL3_READ__data_avail__yes 1 -#define R_SERIAL3_READ__data_in__BITNR 0 -#define R_SERIAL3_READ__data_in__WIDTH 8 - -#define R_SERIAL3_STATUS (IO_TYPECAST_RO_BYTE 0xb0000079) -#define R_SERIAL3_STATUS__xoff_detect__BITNR 7 -#define R_SERIAL3_STATUS__xoff_detect__WIDTH 1 -#define R_SERIAL3_STATUS__xoff_detect__no_xoff 0 -#define R_SERIAL3_STATUS__xoff_detect__xoff 1 -#define R_SERIAL3_STATUS__cts___BITNR 6 -#define R_SERIAL3_STATUS__cts___WIDTH 1 -#define R_SERIAL3_STATUS__cts___active 0 -#define R_SERIAL3_STATUS__cts___inactive 1 -#define R_SERIAL3_STATUS__tr_ready__BITNR 5 -#define R_SERIAL3_STATUS__tr_ready__WIDTH 1 -#define R_SERIAL3_STATUS__tr_ready__full 0 -#define R_SERIAL3_STATUS__tr_ready__ready 1 -#define R_SERIAL3_STATUS__rxd__BITNR 4 -#define R_SERIAL3_STATUS__rxd__WIDTH 1 -#define R_SERIAL3_STATUS__overrun__BITNR 3 -#define R_SERIAL3_STATUS__overrun__WIDTH 1 -#define R_SERIAL3_STATUS__overrun__no 0 -#define R_SERIAL3_STATUS__overrun__yes 1 -#define R_SERIAL3_STATUS__par_err__BITNR 2 -#define R_SERIAL3_STATUS__par_err__WIDTH 1 -#define R_SERIAL3_STATUS__par_err__no 0 -#define R_SERIAL3_STATUS__par_err__yes 1 -#define R_SERIAL3_STATUS__framing_err__BITNR 1 -#define R_SERIAL3_STATUS__framing_err__WIDTH 1 -#define R_SERIAL3_STATUS__framing_err__no 0 -#define R_SERIAL3_STATUS__framing_err__yes 1 -#define R_SERIAL3_STATUS__data_avail__BITNR 0 -#define R_SERIAL3_STATUS__data_avail__WIDTH 1 -#define R_SERIAL3_STATUS__data_avail__no 0 -#define R_SERIAL3_STATUS__data_avail__yes 1 - -#define R_SERIAL3_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000078) -#define R_SERIAL3_REC_DATA__data_in__BITNR 0 -#define R_SERIAL3_REC_DATA__data_in__WIDTH 8 - -#define R_SERIAL3_XOFF (IO_TYPECAST_UDWORD 0xb000007c) -#define R_SERIAL3_XOFF__tx_stop__BITNR 9 -#define R_SERIAL3_XOFF__tx_stop__WIDTH 1 -#define R_SERIAL3_XOFF__tx_stop__enable 0 -#define R_SERIAL3_XOFF__tx_stop__stop 1 -#define R_SERIAL3_XOFF__auto_xoff__BITNR 8 -#define R_SERIAL3_XOFF__auto_xoff__WIDTH 1 -#define R_SERIAL3_XOFF__auto_xoff__disable 0 -#define R_SERIAL3_XOFF__auto_xoff__enable 1 -#define R_SERIAL3_XOFF__xoff_char__BITNR 0 -#define R_SERIAL3_XOFF__xoff_char__WIDTH 8 - -#define R_ALT_SER_BAUDRATE (IO_TYPECAST_UDWORD 0xb000005c) -#define R_ALT_SER_BAUDRATE__ser3_tr__BITNR 28 -#define R_ALT_SER_BAUDRATE__ser3_tr__WIDTH 2 -#define R_ALT_SER_BAUDRATE__ser3_tr__normal 0 -#define R_ALT_SER_BAUDRATE__ser3_tr__prescale 1 -#define R_ALT_SER_BAUDRATE__ser3_tr__extern 2 -#define R_ALT_SER_BAUDRATE__ser3_tr__timer 3 -#define R_ALT_SER_BAUDRATE__ser3_rec__BITNR 24 -#define R_ALT_SER_BAUDRATE__ser3_rec__WIDTH 2 -#define R_ALT_SER_BAUDRATE__ser3_rec__normal 0 -#define R_ALT_SER_BAUDRATE__ser3_rec__prescale 1 -#define R_ALT_SER_BAUDRATE__ser3_rec__extern 2 -#define R_ALT_SER_BAUDRATE__ser3_rec__timer 3 -#define R_ALT_SER_BAUDRATE__ser2_tr__BITNR 20 -#define R_ALT_SER_BAUDRATE__ser2_tr__WIDTH 2 -#define R_ALT_SER_BAUDRATE__ser2_tr__normal 0 -#define R_ALT_SER_BAUDRATE__ser2_tr__prescale 1 -#define R_ALT_SER_BAUDRATE__ser2_tr__extern 2 -#define R_ALT_SER_BAUDRATE__ser2_tr__timer 3 -#define R_ALT_SER_BAUDRATE__ser2_rec__BITNR 16 -#define R_ALT_SER_BAUDRATE__ser2_rec__WIDTH 2 -#define R_ALT_SER_BAUDRATE__ser2_rec__normal 0 -#define R_ALT_SER_BAUDRATE__ser2_rec__prescale 1 -#define R_ALT_SER_BAUDRATE__ser2_rec__extern 2 -#define R_ALT_SER_BAUDRATE__ser2_rec__timer 3 -#define R_ALT_SER_BAUDRATE__ser1_tr__BITNR 12 -#define R_ALT_SER_BAUDRATE__ser1_tr__WIDTH 2 -#define R_ALT_SER_BAUDRATE__ser1_tr__normal 0 -#define R_ALT_SER_BAUDRATE__ser1_tr__prescale 1 -#define R_ALT_SER_BAUDRATE__ser1_tr__extern 2 -#define R_ALT_SER_BAUDRATE__ser1_tr__timer 3 -#define R_ALT_SER_BAUDRATE__ser1_rec__BITNR 8 -#define R_ALT_SER_BAUDRATE__ser1_rec__WIDTH 2 -#define R_ALT_SER_BAUDRATE__ser1_rec__normal 0 -#define R_ALT_SER_BAUDRATE__ser1_rec__prescale 1 -#define R_ALT_SER_BAUDRATE__ser1_rec__extern 2 -#define R_ALT_SER_BAUDRATE__ser1_rec__timer 3 -#define R_ALT_SER_BAUDRATE__ser0_tr__BITNR 4 -#define R_ALT_SER_BAUDRATE__ser0_tr__WIDTH 2 -#define R_ALT_SER_BAUDRATE__ser0_tr__normal 0 -#define R_ALT_SER_BAUDRATE__ser0_tr__prescale 1 -#define R_ALT_SER_BAUDRATE__ser0_tr__extern 2 -#define R_ALT_SER_BAUDRATE__ser0_tr__timer 3 -#define R_ALT_SER_BAUDRATE__ser0_rec__BITNR 0 -#define R_ALT_SER_BAUDRATE__ser0_rec__WIDTH 2 -#define R_ALT_SER_BAUDRATE__ser0_rec__normal 0 -#define R_ALT_SER_BAUDRATE__ser0_rec__prescale 1 -#define R_ALT_SER_BAUDRATE__ser0_rec__extern 2 -#define R_ALT_SER_BAUDRATE__ser0_rec__timer 3 - -/* -!* Network interface registers -!*/ - -#define R_NETWORK_SA_0 (IO_TYPECAST_UDWORD 0xb0000080) -#define R_NETWORK_SA_0__ma0_low__BITNR 0 -#define R_NETWORK_SA_0__ma0_low__WIDTH 32 - -#define R_NETWORK_SA_1 (IO_TYPECAST_UDWORD 0xb0000084) -#define R_NETWORK_SA_1__ma1_low__BITNR 16 -#define R_NETWORK_SA_1__ma1_low__WIDTH 16 -#define R_NETWORK_SA_1__ma0_high__BITNR 0 -#define R_NETWORK_SA_1__ma0_high__WIDTH 16 - -#define R_NETWORK_SA_2 (IO_TYPECAST_UDWORD 0xb0000088) -#define R_NETWORK_SA_2__ma1_high__BITNR 0 -#define R_NETWORK_SA_2__ma1_high__WIDTH 32 - -#define R_NETWORK_GA_0 (IO_TYPECAST_UDWORD 0xb000008c) -#define R_NETWORK_GA_0__ga_low__BITNR 0 -#define R_NETWORK_GA_0__ga_low__WIDTH 32 - -#define R_NETWORK_GA_1 (IO_TYPECAST_UDWORD 0xb0000090) -#define R_NETWORK_GA_1__ga_high__BITNR 0 -#define R_NETWORK_GA_1__ga_high__WIDTH 32 - -#define R_NETWORK_REC_CONFIG (IO_TYPECAST_UDWORD 0xb0000094) -#define R_NETWORK_REC_CONFIG__max_size__BITNR 10 -#define R_NETWORK_REC_CONFIG__max_size__WIDTH 1 -#define R_NETWORK_REC_CONFIG__max_size__size1518 0 -#define R_NETWORK_REC_CONFIG__max_size__size1522 1 -#define R_NETWORK_REC_CONFIG__duplex__BITNR 9 -#define R_NETWORK_REC_CONFIG__duplex__WIDTH 1 -#define R_NETWORK_REC_CONFIG__duplex__full 1 -#define R_NETWORK_REC_CONFIG__duplex__half 0 -#define R_NETWORK_REC_CONFIG__bad_crc__BITNR 8 -#define R_NETWORK_REC_CONFIG__bad_crc__WIDTH 1 -#define R_NETWORK_REC_CONFIG__bad_crc__receive 1 -#define R_NETWORK_REC_CONFIG__bad_crc__discard 0 -#define R_NETWORK_REC_CONFIG__oversize__BITNR 7 -#define R_NETWORK_REC_CONFIG__oversize__WIDTH 1 -#define R_NETWORK_REC_CONFIG__oversize__receive 1 -#define R_NETWORK_REC_CONFIG__oversize__discard 0 -#define R_NETWORK_REC_CONFIG__undersize__BITNR 6 -#define R_NETWORK_REC_CONFIG__undersize__WIDTH 1 -#define R_NETWORK_REC_CONFIG__undersize__receive 1 -#define R_NETWORK_REC_CONFIG__undersize__discard 0 -#define R_NETWORK_REC_CONFIG__all_roots__BITNR 5 -#define R_NETWORK_REC_CONFIG__all_roots__WIDTH 1 -#define R_NETWORK_REC_CONFIG__all_roots__receive 1 -#define R_NETWORK_REC_CONFIG__all_roots__discard 0 -#define R_NETWORK_REC_CONFIG__tr_broadcast__BITNR 4 -#define R_NETWORK_REC_CONFIG__tr_broadcast__WIDTH 1 -#define R_NETWORK_REC_CONFIG__tr_broadcast__receive 1 -#define R_NETWORK_REC_CONFIG__tr_broadcast__discard 0 -#define R_NETWORK_REC_CONFIG__broadcast__BITNR 3 -#define R_NETWORK_REC_CONFIG__broadcast__WIDTH 1 -#define R_NETWORK_REC_CONFIG__broadcast__receive 1 -#define R_NETWORK_REC_CONFIG__broadcast__discard 0 -#define R_NETWORK_REC_CONFIG__individual__BITNR 2 -#define R_NETWORK_REC_CONFIG__individual__WIDTH 1 -#define R_NETWORK_REC_CONFIG__individual__receive 1 -#define R_NETWORK_REC_CONFIG__individual__discard 0 -#define R_NETWORK_REC_CONFIG__ma1__BITNR 1 -#define R_NETWORK_REC_CONFIG__ma1__WIDTH 1 -#define R_NETWORK_REC_CONFIG__ma1__enable 1 -#define R_NETWORK_REC_CONFIG__ma1__disable 0 -#define R_NETWORK_REC_CONFIG__ma0__BITNR 0 -#define R_NETWORK_REC_CONFIG__ma0__WIDTH 1 -#define R_NETWORK_REC_CONFIG__ma0__enable 1 -#define R_NETWORK_REC_CONFIG__ma0__disable 0 - -#define R_NETWORK_GEN_CONFIG (IO_TYPECAST_UDWORD 0xb0000098) -#define R_NETWORK_GEN_CONFIG__loopback__BITNR 5 -#define R_NETWORK_GEN_CONFIG__loopback__WIDTH 1 -#define R_NETWORK_GEN_CONFIG__loopback__on 1 -#define R_NETWORK_GEN_CONFIG__loopback__off 0 -#define R_NETWORK_GEN_CONFIG__frame__BITNR 4 -#define R_NETWORK_GEN_CONFIG__frame__WIDTH 1 -#define R_NETWORK_GEN_CONFIG__frame__tokenr 1 -#define R_NETWORK_GEN_CONFIG__frame__ether 0 -#define R_NETWORK_GEN_CONFIG__vg__BITNR 3 -#define R_NETWORK_GEN_CONFIG__vg__WIDTH 1 -#define R_NETWORK_GEN_CONFIG__vg__on 1 -#define R_NETWORK_GEN_CONFIG__vg__off 0 -#define R_NETWORK_GEN_CONFIG__phy__BITNR 1 -#define R_NETWORK_GEN_CONFIG__phy__WIDTH 2 -#define R_NETWORK_GEN_CONFIG__phy__sni 0 -#define R_NETWORK_GEN_CONFIG__phy__mii_clk 1 -#define R_NETWORK_GEN_CONFIG__phy__mii_err 2 -#define R_NETWORK_GEN_CONFIG__phy__mii_req 3 -#define R_NETWORK_GEN_CONFIG__enable__BITNR 0 -#define R_NETWORK_GEN_CONFIG__enable__WIDTH 1 -#define R_NETWORK_GEN_CONFIG__enable__on 1 -#define R_NETWORK_GEN_CONFIG__enable__off 0 - -#define R_NETWORK_TR_CTRL (IO_TYPECAST_UDWORD 0xb000009c) -#define R_NETWORK_TR_CTRL__clr_error__BITNR 8 -#define R_NETWORK_TR_CTRL__clr_error__WIDTH 1 -#define R_NETWORK_TR_CTRL__clr_error__clr 1 -#define R_NETWORK_TR_CTRL__clr_error__nop 0 -#define R_NETWORK_TR_CTRL__delay__BITNR 5 -#define R_NETWORK_TR_CTRL__delay__WIDTH 1 -#define R_NETWORK_TR_CTRL__delay__d2us 1 -#define R_NETWORK_TR_CTRL__delay__none 0 -#define R_NETWORK_TR_CTRL__cancel__BITNR 4 -#define R_NETWORK_TR_CTRL__cancel__WIDTH 1 -#define R_NETWORK_TR_CTRL__cancel__do 1 -#define R_NETWORK_TR_CTRL__cancel__dont 0 -#define R_NETWORK_TR_CTRL__cd__BITNR 3 -#define R_NETWORK_TR_CTRL__cd__WIDTH 1 -#define R_NETWORK_TR_CTRL__cd__enable 0 -#define R_NETWORK_TR_CTRL__cd__disable 1 -#define R_NETWORK_TR_CTRL__cd__ack_col 0 -#define R_NETWORK_TR_CTRL__cd__ack_crs 1 -#define R_NETWORK_TR_CTRL__retry__BITNR 2 -#define R_NETWORK_TR_CTRL__retry__WIDTH 1 -#define R_NETWORK_TR_CTRL__retry__enable 0 -#define R_NETWORK_TR_CTRL__retry__disable 1 -#define R_NETWORK_TR_CTRL__pad__BITNR 1 -#define R_NETWORK_TR_CTRL__pad__WIDTH 1 -#define R_NETWORK_TR_CTRL__pad__enable 1 -#define R_NETWORK_TR_CTRL__pad__disable 0 -#define R_NETWORK_TR_CTRL__crc__BITNR 0 -#define R_NETWORK_TR_CTRL__crc__WIDTH 1 -#define R_NETWORK_TR_CTRL__crc__enable 0 -#define R_NETWORK_TR_CTRL__crc__disable 1 - -#define R_NETWORK_MGM_CTRL (IO_TYPECAST_UDWORD 0xb00000a0) -#define R_NETWORK_MGM_CTRL__txd_pins__BITNR 4 -#define R_NETWORK_MGM_CTRL__txd_pins__WIDTH 4 -#define R_NETWORK_MGM_CTRL__txer_pin__BITNR 3 -#define R_NETWORK_MGM_CTRL__txer_pin__WIDTH 1 -#define R_NETWORK_MGM_CTRL__mdck__BITNR 2 -#define R_NETWORK_MGM_CTRL__mdck__WIDTH 1 -#define R_NETWORK_MGM_CTRL__mdoe__BITNR 1 -#define R_NETWORK_MGM_CTRL__mdoe__WIDTH 1 -#define R_NETWORK_MGM_CTRL__mdoe__enable 1 -#define R_NETWORK_MGM_CTRL__mdoe__disable 0 -#define R_NETWORK_MGM_CTRL__mdio__BITNR 0 -#define R_NETWORK_MGM_CTRL__mdio__WIDTH 1 - -#define R_NETWORK_STAT (IO_TYPECAST_RO_UDWORD 0xb00000a0) -#define R_NETWORK_STAT__rxd_pins__BITNR 4 -#define R_NETWORK_STAT__rxd_pins__WIDTH 4 -#define R_NETWORK_STAT__rxer__BITNR 3 -#define R_NETWORK_STAT__rxer__WIDTH 1 -#define R_NETWORK_STAT__underrun__BITNR 2 -#define R_NETWORK_STAT__underrun__WIDTH 1 -#define R_NETWORK_STAT__underrun__yes 1 -#define R_NETWORK_STAT__underrun__no 0 -#define R_NETWORK_STAT__exc_col__BITNR 1 -#define R_NETWORK_STAT__exc_col__WIDTH 1 -#define R_NETWORK_STAT__exc_col__yes 1 -#define R_NETWORK_STAT__exc_col__no 0 -#define R_NETWORK_STAT__mdio__BITNR 0 -#define R_NETWORK_STAT__mdio__WIDTH 1 - -#define R_REC_COUNTERS (IO_TYPECAST_RO_UDWORD 0xb00000a4) -#define R_REC_COUNTERS__congestion__BITNR 24 -#define R_REC_COUNTERS__congestion__WIDTH 8 -#define R_REC_COUNTERS__oversize__BITNR 16 -#define R_REC_COUNTERS__oversize__WIDTH 8 -#define R_REC_COUNTERS__alignment_error__BITNR 8 -#define R_REC_COUNTERS__alignment_error__WIDTH 8 -#define R_REC_COUNTERS__crc_error__BITNR 0 -#define R_REC_COUNTERS__crc_error__WIDTH 8 - -#define R_TR_COUNTERS (IO_TYPECAST_RO_UDWORD 0xb00000a8) -#define R_TR_COUNTERS__deferred__BITNR 24 -#define R_TR_COUNTERS__deferred__WIDTH 8 -#define R_TR_COUNTERS__late_col__BITNR 16 -#define R_TR_COUNTERS__late_col__WIDTH 8 -#define R_TR_COUNTERS__multiple_col__BITNR 8 -#define R_TR_COUNTERS__multiple_col__WIDTH 8 -#define R_TR_COUNTERS__single_col__BITNR 0 -#define R_TR_COUNTERS__single_col__WIDTH 8 - -#define R_PHY_COUNTERS (IO_TYPECAST_RO_UDWORD 0xb00000ac) -#define R_PHY_COUNTERS__sqe_test_error__BITNR 8 -#define R_PHY_COUNTERS__sqe_test_error__WIDTH 8 -#define R_PHY_COUNTERS__carrier_loss__BITNR 0 -#define R_PHY_COUNTERS__carrier_loss__WIDTH 8 - -/* -!* Parallel printer port registers -!*/ - -#define R_PAR0_CTRL_DATA (IO_TYPECAST_UDWORD 0xb0000040) -#define R_PAR0_CTRL_DATA__peri_int__BITNR 24 -#define R_PAR0_CTRL_DATA__peri_int__WIDTH 1 -#define R_PAR0_CTRL_DATA__peri_int__ack 1 -#define R_PAR0_CTRL_DATA__peri_int__nop 0 -#define R_PAR0_CTRL_DATA__oe__BITNR 20 -#define R_PAR0_CTRL_DATA__oe__WIDTH 1 -#define R_PAR0_CTRL_DATA__oe__enable 1 -#define R_PAR0_CTRL_DATA__oe__disable 0 -#define R_PAR0_CTRL_DATA__seli__BITNR 19 -#define R_PAR0_CTRL_DATA__seli__WIDTH 1 -#define R_PAR0_CTRL_DATA__seli__active 1 -#define R_PAR0_CTRL_DATA__seli__inactive 0 -#define R_PAR0_CTRL_DATA__autofd__BITNR 18 -#define R_PAR0_CTRL_DATA__autofd__WIDTH 1 -#define R_PAR0_CTRL_DATA__autofd__active 1 -#define R_PAR0_CTRL_DATA__autofd__inactive 0 -#define R_PAR0_CTRL_DATA__strb__BITNR 17 -#define R_PAR0_CTRL_DATA__strb__WIDTH 1 -#define R_PAR0_CTRL_DATA__strb__active 1 -#define R_PAR0_CTRL_DATA__strb__inactive 0 -#define R_PAR0_CTRL_DATA__init__BITNR 16 -#define R_PAR0_CTRL_DATA__init__WIDTH 1 -#define R_PAR0_CTRL_DATA__init__active 1 -#define R_PAR0_CTRL_DATA__init__inactive 0 -#define R_PAR0_CTRL_DATA__ecp_cmd__BITNR 8 -#define R_PAR0_CTRL_DATA__ecp_cmd__WIDTH 1 -#define R_PAR0_CTRL_DATA__ecp_cmd__command 1 -#define R_PAR0_CTRL_DATA__ecp_cmd__data 0 -#define R_PAR0_CTRL_DATA__data__BITNR 0 -#define R_PAR0_CTRL_DATA__data__WIDTH 8 - -#define R_PAR0_CTRL (IO_TYPECAST_BYTE 0xb0000042) -#define R_PAR0_CTRL__ctrl__BITNR 0 -#define R_PAR0_CTRL__ctrl__WIDTH 5 - -#define R_PAR0_STATUS_DATA (IO_TYPECAST_RO_UDWORD 0xb0000040) -#define R_PAR0_STATUS_DATA__mode__BITNR 29 -#define R_PAR0_STATUS_DATA__mode__WIDTH 3 -#define R_PAR0_STATUS_DATA__mode__manual 0 -#define R_PAR0_STATUS_DATA__mode__centronics 1 -#define R_PAR0_STATUS_DATA__mode__fastbyte 2 -#define R_PAR0_STATUS_DATA__mode__nibble 3 -#define R_PAR0_STATUS_DATA__mode__byte 4 -#define R_PAR0_STATUS_DATA__mode__ecp_fwd 5 -#define R_PAR0_STATUS_DATA__mode__ecp_rev 6 -#define R_PAR0_STATUS_DATA__mode__off 7 -#define R_PAR0_STATUS_DATA__mode__epp_wr1 5 -#define R_PAR0_STATUS_DATA__mode__epp_wr2 6 -#define R_PAR0_STATUS_DATA__mode__epp_wr3 7 -#define R_PAR0_STATUS_DATA__mode__epp_rd 0 -#define R_PAR0_STATUS_DATA__perr__BITNR 28 -#define R_PAR0_STATUS_DATA__perr__WIDTH 1 -#define R_PAR0_STATUS_DATA__perr__active 1 -#define R_PAR0_STATUS_DATA__perr__inactive 0 -#define R_PAR0_STATUS_DATA__ack__BITNR 27 -#define R_PAR0_STATUS_DATA__ack__WIDTH 1 -#define R_PAR0_STATUS_DATA__ack__active 0 -#define R_PAR0_STATUS_DATA__ack__inactive 1 -#define R_PAR0_STATUS_DATA__busy__BITNR 26 -#define R_PAR0_STATUS_DATA__busy__WIDTH 1 -#define R_PAR0_STATUS_DATA__busy__active 1 -#define R_PAR0_STATUS_DATA__busy__inactive 0 -#define R_PAR0_STATUS_DATA__fault__BITNR 25 -#define R_PAR0_STATUS_DATA__fault__WIDTH 1 -#define R_PAR0_STATUS_DATA__fault__active 0 -#define R_PAR0_STATUS_DATA__fault__inactive 1 -#define R_PAR0_STATUS_DATA__sel__BITNR 24 -#define R_PAR0_STATUS_DATA__sel__WIDTH 1 -#define R_PAR0_STATUS_DATA__sel__active 1 -#define R_PAR0_STATUS_DATA__sel__inactive 0 -#define R_PAR0_STATUS_DATA__ext_mode__BITNR 23 -#define R_PAR0_STATUS_DATA__ext_mode__WIDTH 1 -#define R_PAR0_STATUS_DATA__ext_mode__enable 1 -#define R_PAR0_STATUS_DATA__ext_mode__disable 0 -#define R_PAR0_STATUS_DATA__ecp_16__BITNR 22 -#define R_PAR0_STATUS_DATA__ecp_16__WIDTH 1 -#define R_PAR0_STATUS_DATA__ecp_16__active 1 -#define R_PAR0_STATUS_DATA__ecp_16__inactive 0 -#define R_PAR0_STATUS_DATA__tr_rdy__BITNR 17 -#define R_PAR0_STATUS_DATA__tr_rdy__WIDTH 1 -#define R_PAR0_STATUS_DATA__tr_rdy__ready 1 -#define R_PAR0_STATUS_DATA__tr_rdy__busy 0 -#define R_PAR0_STATUS_DATA__dav__BITNR 16 -#define R_PAR0_STATUS_DATA__dav__WIDTH 1 -#define R_PAR0_STATUS_DATA__dav__data 1 -#define R_PAR0_STATUS_DATA__dav__nodata 0 -#define R_PAR0_STATUS_DATA__ecp_cmd__BITNR 8 -#define R_PAR0_STATUS_DATA__ecp_cmd__WIDTH 1 -#define R_PAR0_STATUS_DATA__ecp_cmd__command 1 -#define R_PAR0_STATUS_DATA__ecp_cmd__data 0 -#define R_PAR0_STATUS_DATA__data__BITNR 0 -#define R_PAR0_STATUS_DATA__data__WIDTH 8 - -#define R_PAR0_STATUS (IO_TYPECAST_RO_UWORD 0xb0000042) -#define R_PAR0_STATUS__mode__BITNR 13 -#define R_PAR0_STATUS__mode__WIDTH 3 -#define R_PAR0_STATUS__mode__manual 0 -#define R_PAR0_STATUS__mode__centronics 1 -#define R_PAR0_STATUS__mode__fastbyte 2 -#define R_PAR0_STATUS__mode__nibble 3 -#define R_PAR0_STATUS__mode__byte 4 -#define R_PAR0_STATUS__mode__ecp_fwd 5 -#define R_PAR0_STATUS__mode__ecp_rev 6 -#define R_PAR0_STATUS__mode__off 7 -#define R_PAR0_STATUS__mode__epp_wr1 5 -#define R_PAR0_STATUS__mode__epp_wr2 6 -#define R_PAR0_STATUS__mode__epp_wr3 7 -#define R_PAR0_STATUS__mode__epp_rd 0 -#define R_PAR0_STATUS__perr__BITNR 12 -#define R_PAR0_STATUS__perr__WIDTH 1 -#define R_PAR0_STATUS__perr__active 1 -#define R_PAR0_STATUS__perr__inactive 0 -#define R_PAR0_STATUS__ack__BITNR 11 -#define R_PAR0_STATUS__ack__WIDTH 1 -#define R_PAR0_STATUS__ack__active 0 -#define R_PAR0_STATUS__ack__inactive 1 -#define R_PAR0_STATUS__busy__BITNR 10 -#define R_PAR0_STATUS__busy__WIDTH 1 -#define R_PAR0_STATUS__busy__active 1 -#define R_PAR0_STATUS__busy__inactive 0 -#define R_PAR0_STATUS__fault__BITNR 9 -#define R_PAR0_STATUS__fault__WIDTH 1 -#define R_PAR0_STATUS__fault__active 0 -#define R_PAR0_STATUS__fault__inactive 1 -#define R_PAR0_STATUS__sel__BITNR 8 -#define R_PAR0_STATUS__sel__WIDTH 1 -#define R_PAR0_STATUS__sel__active 1 -#define R_PAR0_STATUS__sel__inactive 0 -#define R_PAR0_STATUS__ext_mode__BITNR 7 -#define R_PAR0_STATUS__ext_mode__WIDTH 1 -#define R_PAR0_STATUS__ext_mode__enable 1 -#define R_PAR0_STATUS__ext_mode__disable 0 -#define R_PAR0_STATUS__ecp_16__BITNR 6 -#define R_PAR0_STATUS__ecp_16__WIDTH 1 -#define R_PAR0_STATUS__ecp_16__active 1 -#define R_PAR0_STATUS__ecp_16__inactive 0 -#define R_PAR0_STATUS__tr_rdy__BITNR 1 -#define R_PAR0_STATUS__tr_rdy__WIDTH 1 -#define R_PAR0_STATUS__tr_rdy__ready 1 -#define R_PAR0_STATUS__tr_rdy__busy 0 -#define R_PAR0_STATUS__dav__BITNR 0 -#define R_PAR0_STATUS__dav__WIDTH 1 -#define R_PAR0_STATUS__dav__data 1 -#define R_PAR0_STATUS__dav__nodata 0 - -#define R_PAR_ECP16_DATA (IO_TYPECAST_UWORD 0xb0000040) -#define R_PAR_ECP16_DATA__data__BITNR 0 -#define R_PAR_ECP16_DATA__data__WIDTH 16 - -#define R_PAR0_CONFIG (IO_TYPECAST_UDWORD 0xb0000044) -#define R_PAR0_CONFIG__ioe__BITNR 25 -#define R_PAR0_CONFIG__ioe__WIDTH 1 -#define R_PAR0_CONFIG__ioe__inv 1 -#define R_PAR0_CONFIG__ioe__noninv 0 -#define R_PAR0_CONFIG__iseli__BITNR 24 -#define R_PAR0_CONFIG__iseli__WIDTH 1 -#define R_PAR0_CONFIG__iseli__inv 1 -#define R_PAR0_CONFIG__iseli__noninv 0 -#define R_PAR0_CONFIG__iautofd__BITNR 23 -#define R_PAR0_CONFIG__iautofd__WIDTH 1 -#define R_PAR0_CONFIG__iautofd__inv 1 -#define R_PAR0_CONFIG__iautofd__noninv 0 -#define R_PAR0_CONFIG__istrb__BITNR 22 -#define R_PAR0_CONFIG__istrb__WIDTH 1 -#define R_PAR0_CONFIG__istrb__inv 1 -#define R_PAR0_CONFIG__istrb__noninv 0 -#define R_PAR0_CONFIG__iinit__BITNR 21 -#define R_PAR0_CONFIG__iinit__WIDTH 1 -#define R_PAR0_CONFIG__iinit__inv 1 -#define R_PAR0_CONFIG__iinit__noninv 0 -#define R_PAR0_CONFIG__iperr__BITNR 20 -#define R_PAR0_CONFIG__iperr__WIDTH 1 -#define R_PAR0_CONFIG__iperr__inv 1 -#define R_PAR0_CONFIG__iperr__noninv 0 -#define R_PAR0_CONFIG__iack__BITNR 19 -#define R_PAR0_CONFIG__iack__WIDTH 1 -#define R_PAR0_CONFIG__iack__inv 1 -#define R_PAR0_CONFIG__iack__noninv 0 -#define R_PAR0_CONFIG__ibusy__BITNR 18 -#define R_PAR0_CONFIG__ibusy__WIDTH 1 -#define R_PAR0_CONFIG__ibusy__inv 1 -#define R_PAR0_CONFIG__ibusy__noninv 0 -#define R_PAR0_CONFIG__ifault__BITNR 17 -#define R_PAR0_CONFIG__ifault__WIDTH 1 -#define R_PAR0_CONFIG__ifault__inv 1 -#define R_PAR0_CONFIG__ifault__noninv 0 -#define R_PAR0_CONFIG__isel__BITNR 16 -#define R_PAR0_CONFIG__isel__WIDTH 1 -#define R_PAR0_CONFIG__isel__inv 1 -#define R_PAR0_CONFIG__isel__noninv 0 -#define R_PAR0_CONFIG__ext_mode__BITNR 11 -#define R_PAR0_CONFIG__ext_mode__WIDTH 1 -#define R_PAR0_CONFIG__ext_mode__enable 1 -#define R_PAR0_CONFIG__ext_mode__disable 0 -#define R_PAR0_CONFIG__wide__BITNR 10 -#define R_PAR0_CONFIG__wide__WIDTH 1 -#define R_PAR0_CONFIG__wide__enable 1 -#define R_PAR0_CONFIG__wide__disable 0 -#define R_PAR0_CONFIG__dma__BITNR 9 -#define R_PAR0_CONFIG__dma__WIDTH 1 -#define R_PAR0_CONFIG__dma__enable 1 -#define R_PAR0_CONFIG__dma__disable 0 -#define R_PAR0_CONFIG__rle_in__BITNR 8 -#define R_PAR0_CONFIG__rle_in__WIDTH 1 -#define R_PAR0_CONFIG__rle_in__enable 1 -#define R_PAR0_CONFIG__rle_in__disable 0 -#define R_PAR0_CONFIG__rle_out__BITNR 7 -#define R_PAR0_CONFIG__rle_out__WIDTH 1 -#define R_PAR0_CONFIG__rle_out__enable 1 -#define R_PAR0_CONFIG__rle_out__disable 0 -#define R_PAR0_CONFIG__enable__BITNR 6 -#define R_PAR0_CONFIG__enable__WIDTH 1 -#define R_PAR0_CONFIG__enable__on 1 -#define R_PAR0_CONFIG__enable__reset 0 -#define R_PAR0_CONFIG__force__BITNR 5 -#define R_PAR0_CONFIG__force__WIDTH 1 -#define R_PAR0_CONFIG__force__on 1 -#define R_PAR0_CONFIG__force__off 0 -#define R_PAR0_CONFIG__ign_ack__BITNR 4 -#define R_PAR0_CONFIG__ign_ack__WIDTH 1 -#define R_PAR0_CONFIG__ign_ack__ignore 1 -#define R_PAR0_CONFIG__ign_ack__wait 0 -#define R_PAR0_CONFIG__oe_ack__BITNR 3 -#define R_PAR0_CONFIG__oe_ack__WIDTH 1 -#define R_PAR0_CONFIG__oe_ack__wait_oe 1 -#define R_PAR0_CONFIG__oe_ack__dont_wait 0 -#define R_PAR0_CONFIG__oe_ack__epp_addr 1 -#define R_PAR0_CONFIG__oe_ack__epp_data 0 -#define R_PAR0_CONFIG__epp_addr_data__BITNR 3 -#define R_PAR0_CONFIG__epp_addr_data__WIDTH 1 -#define R_PAR0_CONFIG__epp_addr_data__wait_oe 1 -#define R_PAR0_CONFIG__epp_addr_data__dont_wait 0 -#define R_PAR0_CONFIG__epp_addr_data__epp_addr 1 -#define R_PAR0_CONFIG__epp_addr_data__epp_data 0 -#define R_PAR0_CONFIG__mode__BITNR 0 -#define R_PAR0_CONFIG__mode__WIDTH 3 -#define R_PAR0_CONFIG__mode__manual 0 -#define R_PAR0_CONFIG__mode__centronics 1 -#define R_PAR0_CONFIG__mode__fastbyte 2 -#define R_PAR0_CONFIG__mode__nibble 3 -#define R_PAR0_CONFIG__mode__byte 4 -#define R_PAR0_CONFIG__mode__ecp_fwd 5 -#define R_PAR0_CONFIG__mode__ecp_rev 6 -#define R_PAR0_CONFIG__mode__off 7 -#define R_PAR0_CONFIG__mode__epp_wr1 5 -#define R_PAR0_CONFIG__mode__epp_wr2 6 -#define R_PAR0_CONFIG__mode__epp_wr3 7 -#define R_PAR0_CONFIG__mode__epp_rd 0 - -#define R_PAR0_DELAY (IO_TYPECAST_UDWORD 0xb0000048) -#define R_PAR0_DELAY__fine_hold__BITNR 21 -#define R_PAR0_DELAY__fine_hold__WIDTH 3 -#define R_PAR0_DELAY__hold__BITNR 16 -#define R_PAR0_DELAY__hold__WIDTH 5 -#define R_PAR0_DELAY__fine_strb__BITNR 13 -#define R_PAR0_DELAY__fine_strb__WIDTH 3 -#define R_PAR0_DELAY__strobe__BITNR 8 -#define R_PAR0_DELAY__strobe__WIDTH 5 -#define R_PAR0_DELAY__fine_setup__BITNR 5 -#define R_PAR0_DELAY__fine_setup__WIDTH 3 -#define R_PAR0_DELAY__setup__BITNR 0 -#define R_PAR0_DELAY__setup__WIDTH 5 - -#define R_PAR1_CTRL_DATA (IO_TYPECAST_UDWORD 0xb0000050) -#define R_PAR1_CTRL_DATA__peri_int__BITNR 24 -#define R_PAR1_CTRL_DATA__peri_int__WIDTH 1 -#define R_PAR1_CTRL_DATA__peri_int__ack 1 -#define R_PAR1_CTRL_DATA__peri_int__nop 0 -#define R_PAR1_CTRL_DATA__oe__BITNR 20 -#define R_PAR1_CTRL_DATA__oe__WIDTH 1 -#define R_PAR1_CTRL_DATA__oe__enable 1 -#define R_PAR1_CTRL_DATA__oe__disable 0 -#define R_PAR1_CTRL_DATA__seli__BITNR 19 -#define R_PAR1_CTRL_DATA__seli__WIDTH 1 -#define R_PAR1_CTRL_DATA__seli__active 1 -#define R_PAR1_CTRL_DATA__seli__inactive 0 -#define R_PAR1_CTRL_DATA__autofd__BITNR 18 -#define R_PAR1_CTRL_DATA__autofd__WIDTH 1 -#define R_PAR1_CTRL_DATA__autofd__active 1 -#define R_PAR1_CTRL_DATA__autofd__inactive 0 -#define R_PAR1_CTRL_DATA__strb__BITNR 17 -#define R_PAR1_CTRL_DATA__strb__WIDTH 1 -#define R_PAR1_CTRL_DATA__strb__active 1 -#define R_PAR1_CTRL_DATA__strb__inactive 0 -#define R_PAR1_CTRL_DATA__init__BITNR 16 -#define R_PAR1_CTRL_DATA__init__WIDTH 1 -#define R_PAR1_CTRL_DATA__init__active 1 -#define R_PAR1_CTRL_DATA__init__inactive 0 -#define R_PAR1_CTRL_DATA__ecp_cmd__BITNR 8 -#define R_PAR1_CTRL_DATA__ecp_cmd__WIDTH 1 -#define R_PAR1_CTRL_DATA__ecp_cmd__command 1 -#define R_PAR1_CTRL_DATA__ecp_cmd__data 0 -#define R_PAR1_CTRL_DATA__data__BITNR 0 -#define R_PAR1_CTRL_DATA__data__WIDTH 8 - -#define R_PAR1_CTRL (IO_TYPECAST_BYTE 0xb0000052) -#define R_PAR1_CTRL__ctrl__BITNR 0 -#define R_PAR1_CTRL__ctrl__WIDTH 5 - -#define R_PAR1_STATUS_DATA (IO_TYPECAST_RO_UDWORD 0xb0000050) -#define R_PAR1_STATUS_DATA__mode__BITNR 29 -#define R_PAR1_STATUS_DATA__mode__WIDTH 3 -#define R_PAR1_STATUS_DATA__mode__manual 0 -#define R_PAR1_STATUS_DATA__mode__centronics 1 -#define R_PAR1_STATUS_DATA__mode__fastbyte 2 -#define R_PAR1_STATUS_DATA__mode__nibble 3 -#define R_PAR1_STATUS_DATA__mode__byte 4 -#define R_PAR1_STATUS_DATA__mode__ecp_fwd 5 -#define R_PAR1_STATUS_DATA__mode__ecp_rev 6 -#define R_PAR1_STATUS_DATA__mode__off 7 -#define R_PAR1_STATUS_DATA__mode__epp_wr1 5 -#define R_PAR1_STATUS_DATA__mode__epp_wr2 6 -#define R_PAR1_STATUS_DATA__mode__epp_wr3 7 -#define R_PAR1_STATUS_DATA__mode__epp_rd 0 -#define R_PAR1_STATUS_DATA__perr__BITNR 28 -#define R_PAR1_STATUS_DATA__perr__WIDTH 1 -#define R_PAR1_STATUS_DATA__perr__active 1 -#define R_PAR1_STATUS_DATA__perr__inactive 0 -#define R_PAR1_STATUS_DATA__ack__BITNR 27 -#define R_PAR1_STATUS_DATA__ack__WIDTH 1 -#define R_PAR1_STATUS_DATA__ack__active 0 -#define R_PAR1_STATUS_DATA__ack__inactive 1 -#define R_PAR1_STATUS_DATA__busy__BITNR 26 -#define R_PAR1_STATUS_DATA__busy__WIDTH 1 -#define R_PAR1_STATUS_DATA__busy__active 1 -#define R_PAR1_STATUS_DATA__busy__inactive 0 -#define R_PAR1_STATUS_DATA__fault__BITNR 25 -#define R_PAR1_STATUS_DATA__fault__WIDTH 1 -#define R_PAR1_STATUS_DATA__fault__active 0 -#define R_PAR1_STATUS_DATA__fault__inactive 1 -#define R_PAR1_STATUS_DATA__sel__BITNR 24 -#define R_PAR1_STATUS_DATA__sel__WIDTH 1 -#define R_PAR1_STATUS_DATA__sel__active 1 -#define R_PAR1_STATUS_DATA__sel__inactive 0 -#define R_PAR1_STATUS_DATA__ext_mode__BITNR 23 -#define R_PAR1_STATUS_DATA__ext_mode__WIDTH 1 -#define R_PAR1_STATUS_DATA__ext_mode__enable 1 -#define R_PAR1_STATUS_DATA__ext_mode__disable 0 -#define R_PAR1_STATUS_DATA__tr_rdy__BITNR 17 -#define R_PAR1_STATUS_DATA__tr_rdy__WIDTH 1 -#define R_PAR1_STATUS_DATA__tr_rdy__ready 1 -#define R_PAR1_STATUS_DATA__tr_rdy__busy 0 -#define R_PAR1_STATUS_DATA__dav__BITNR 16 -#define R_PAR1_STATUS_DATA__dav__WIDTH 1 -#define R_PAR1_STATUS_DATA__dav__data 1 -#define R_PAR1_STATUS_DATA__dav__nodata 0 -#define R_PAR1_STATUS_DATA__ecp_cmd__BITNR 8 -#define R_PAR1_STATUS_DATA__ecp_cmd__WIDTH 1 -#define R_PAR1_STATUS_DATA__ecp_cmd__command 1 -#define R_PAR1_STATUS_DATA__ecp_cmd__data 0 -#define R_PAR1_STATUS_DATA__data__BITNR 0 -#define R_PAR1_STATUS_DATA__data__WIDTH 8 - -#define R_PAR1_STATUS (IO_TYPECAST_RO_UWORD 0xb0000052) -#define R_PAR1_STATUS__mode__BITNR 13 -#define R_PAR1_STATUS__mode__WIDTH 3 -#define R_PAR1_STATUS__mode__manual 0 -#define R_PAR1_STATUS__mode__centronics 1 -#define R_PAR1_STATUS__mode__fastbyte 2 -#define R_PAR1_STATUS__mode__nibble 3 -#define R_PAR1_STATUS__mode__byte 4 -#define R_PAR1_STATUS__mode__ecp_fwd 5 -#define R_PAR1_STATUS__mode__ecp_rev 6 -#define R_PAR1_STATUS__mode__off 7 -#define R_PAR1_STATUS__mode__epp_wr1 5 -#define R_PAR1_STATUS__mode__epp_wr2 6 -#define R_PAR1_STATUS__mode__epp_wr3 7 -#define R_PAR1_STATUS__mode__epp_rd 0 -#define R_PAR1_STATUS__perr__BITNR 12 -#define R_PAR1_STATUS__perr__WIDTH 1 -#define R_PAR1_STATUS__perr__active 1 -#define R_PAR1_STATUS__perr__inactive 0 -#define R_PAR1_STATUS__ack__BITNR 11 -#define R_PAR1_STATUS__ack__WIDTH 1 -#define R_PAR1_STATUS__ack__active 0 -#define R_PAR1_STATUS__ack__inactive 1 -#define R_PAR1_STATUS__busy__BITNR 10 -#define R_PAR1_STATUS__busy__WIDTH 1 -#define R_PAR1_STATUS__busy__active 1 -#define R_PAR1_STATUS__busy__inactive 0 -#define R_PAR1_STATUS__fault__BITNR 9 -#define R_PAR1_STATUS__fault__WIDTH 1 -#define R_PAR1_STATUS__fault__active 0 -#define R_PAR1_STATUS__fault__inactive 1 -#define R_PAR1_STATUS__sel__BITNR 8 -#define R_PAR1_STATUS__sel__WIDTH 1 -#define R_PAR1_STATUS__sel__active 1 -#define R_PAR1_STATUS__sel__inactive 0 -#define R_PAR1_STATUS__ext_mode__BITNR 7 -#define R_PAR1_STATUS__ext_mode__WIDTH 1 -#define R_PAR1_STATUS__ext_mode__enable 1 -#define R_PAR1_STATUS__ext_mode__disable 0 -#define R_PAR1_STATUS__tr_rdy__BITNR 1 -#define R_PAR1_STATUS__tr_rdy__WIDTH 1 -#define R_PAR1_STATUS__tr_rdy__ready 1 -#define R_PAR1_STATUS__tr_rdy__busy 0 -#define R_PAR1_STATUS__dav__BITNR 0 -#define R_PAR1_STATUS__dav__WIDTH 1 -#define R_PAR1_STATUS__dav__data 1 -#define R_PAR1_STATUS__dav__nodata 0 - -#define R_PAR1_CONFIG (IO_TYPECAST_UDWORD 0xb0000054) -#define R_PAR1_CONFIG__ioe__BITNR 25 -#define R_PAR1_CONFIG__ioe__WIDTH 1 -#define R_PAR1_CONFIG__ioe__inv 1 -#define R_PAR1_CONFIG__ioe__noninv 0 -#define R_PAR1_CONFIG__iseli__BITNR 24 -#define R_PAR1_CONFIG__iseli__WIDTH 1 -#define R_PAR1_CONFIG__iseli__inv 1 -#define R_PAR1_CONFIG__iseli__noninv 0 -#define R_PAR1_CONFIG__iautofd__BITNR 23 -#define R_PAR1_CONFIG__iautofd__WIDTH 1 -#define R_PAR1_CONFIG__iautofd__inv 1 -#define R_PAR1_CONFIG__iautofd__noninv 0 -#define R_PAR1_CONFIG__istrb__BITNR 22 -#define R_PAR1_CONFIG__istrb__WIDTH 1 -#define R_PAR1_CONFIG__istrb__inv 1 -#define R_PAR1_CONFIG__istrb__noninv 0 -#define R_PAR1_CONFIG__iinit__BITNR 21 -#define R_PAR1_CONFIG__iinit__WIDTH 1 -#define R_PAR1_CONFIG__iinit__inv 1 -#define R_PAR1_CONFIG__iinit__noninv 0 -#define R_PAR1_CONFIG__iperr__BITNR 20 -#define R_PAR1_CONFIG__iperr__WIDTH 1 -#define R_PAR1_CONFIG__iperr__inv 1 -#define R_PAR1_CONFIG__iperr__noninv 0 -#define R_PAR1_CONFIG__iack__BITNR 19 -#define R_PAR1_CONFIG__iack__WIDTH 1 -#define R_PAR1_CONFIG__iack__inv 1 -#define R_PAR1_CONFIG__iack__noninv 0 -#define R_PAR1_CONFIG__ibusy__BITNR 18 -#define R_PAR1_CONFIG__ibusy__WIDTH 1 -#define R_PAR1_CONFIG__ibusy__inv 1 -#define R_PAR1_CONFIG__ibusy__noninv 0 -#define R_PAR1_CONFIG__ifault__BITNR 17 -#define R_PAR1_CONFIG__ifault__WIDTH 1 -#define R_PAR1_CONFIG__ifault__inv 1 -#define R_PAR1_CONFIG__ifault__noninv 0 -#define R_PAR1_CONFIG__isel__BITNR 16 -#define R_PAR1_CONFIG__isel__WIDTH 1 -#define R_PAR1_CONFIG__isel__inv 1 -#define R_PAR1_CONFIG__isel__noninv 0 -#define R_PAR1_CONFIG__ext_mode__BITNR 11 -#define R_PAR1_CONFIG__ext_mode__WIDTH 1 -#define R_PAR1_CONFIG__ext_mode__enable 1 -#define R_PAR1_CONFIG__ext_mode__disable 0 -#define R_PAR1_CONFIG__dma__BITNR 9 -#define R_PAR1_CONFIG__dma__WIDTH 1 -#define R_PAR1_CONFIG__dma__enable 1 -#define R_PAR1_CONFIG__dma__disable 0 -#define R_PAR1_CONFIG__rle_in__BITNR 8 -#define R_PAR1_CONFIG__rle_in__WIDTH 1 -#define R_PAR1_CONFIG__rle_in__enable 1 -#define R_PAR1_CONFIG__rle_in__disable 0 -#define R_PAR1_CONFIG__rle_out__BITNR 7 -#define R_PAR1_CONFIG__rle_out__WIDTH 1 -#define R_PAR1_CONFIG__rle_out__enable 1 -#define R_PAR1_CONFIG__rle_out__disable 0 -#define R_PAR1_CONFIG__enable__BITNR 6 -#define R_PAR1_CONFIG__enable__WIDTH 1 -#define R_PAR1_CONFIG__enable__on 1 -#define R_PAR1_CONFIG__enable__reset 0 -#define R_PAR1_CONFIG__force__BITNR 5 -#define R_PAR1_CONFIG__force__WIDTH 1 -#define R_PAR1_CONFIG__force__on 1 -#define R_PAR1_CONFIG__force__off 0 -#define R_PAR1_CONFIG__ign_ack__BITNR 4 -#define R_PAR1_CONFIG__ign_ack__WIDTH 1 -#define R_PAR1_CONFIG__ign_ack__ignore 1 -#define R_PAR1_CONFIG__ign_ack__wait 0 -#define R_PAR1_CONFIG__oe_ack__BITNR 3 -#define R_PAR1_CONFIG__oe_ack__WIDTH 1 -#define R_PAR1_CONFIG__oe_ack__wait_oe 1 -#define R_PAR1_CONFIG__oe_ack__dont_wait 0 -#define R_PAR1_CONFIG__oe_ack__epp_addr 1 -#define R_PAR1_CONFIG__oe_ack__epp_data 0 -#define R_PAR1_CONFIG__epp_addr_data__BITNR 3 -#define R_PAR1_CONFIG__epp_addr_data__WIDTH 1 -#define R_PAR1_CONFIG__epp_addr_data__wait_oe 1 -#define R_PAR1_CONFIG__epp_addr_data__dont_wait 0 -#define R_PAR1_CONFIG__epp_addr_data__epp_addr 1 -#define R_PAR1_CONFIG__epp_addr_data__epp_data 0 -#define R_PAR1_CONFIG__mode__BITNR 0 -#define R_PAR1_CONFIG__mode__WIDTH 3 -#define R_PAR1_CONFIG__mode__manual 0 -#define R_PAR1_CONFIG__mode__centronics 1 -#define R_PAR1_CONFIG__mode__fastbyte 2 -#define R_PAR1_CONFIG__mode__nibble 3 -#define R_PAR1_CONFIG__mode__byte 4 -#define R_PAR1_CONFIG__mode__ecp_fwd 5 -#define R_PAR1_CONFIG__mode__ecp_rev 6 -#define R_PAR1_CONFIG__mode__off 7 -#define R_PAR1_CONFIG__mode__epp_wr1 5 -#define R_PAR1_CONFIG__mode__epp_wr2 6 -#define R_PAR1_CONFIG__mode__epp_wr3 7 -#define R_PAR1_CONFIG__mode__epp_rd 0 - -#define R_PAR1_DELAY (IO_TYPECAST_UDWORD 0xb0000058) -#define R_PAR1_DELAY__fine_hold__BITNR 21 -#define R_PAR1_DELAY__fine_hold__WIDTH 3 -#define R_PAR1_DELAY__hold__BITNR 16 -#define R_PAR1_DELAY__hold__WIDTH 5 -#define R_PAR1_DELAY__fine_strb__BITNR 13 -#define R_PAR1_DELAY__fine_strb__WIDTH 3 -#define R_PAR1_DELAY__strobe__BITNR 8 -#define R_PAR1_DELAY__strobe__WIDTH 5 -#define R_PAR1_DELAY__fine_setup__BITNR 5 -#define R_PAR1_DELAY__fine_setup__WIDTH 3 -#define R_PAR1_DELAY__setup__BITNR 0 -#define R_PAR1_DELAY__setup__WIDTH 5 - -/* -!* ATA interface registers -!*/ - -#define R_ATA_CTRL_DATA (IO_TYPECAST_UDWORD 0xb0000040) -#define R_ATA_CTRL_DATA__sel__BITNR 30 -#define R_ATA_CTRL_DATA__sel__WIDTH 2 -#define R_ATA_CTRL_DATA__cs1__BITNR 29 -#define R_ATA_CTRL_DATA__cs1__WIDTH 1 -#define R_ATA_CTRL_DATA__cs1__active 1 -#define R_ATA_CTRL_DATA__cs1__inactive 0 -#define R_ATA_CTRL_DATA__cs0__BITNR 28 -#define R_ATA_CTRL_DATA__cs0__WIDTH 1 -#define R_ATA_CTRL_DATA__cs0__active 1 -#define R_ATA_CTRL_DATA__cs0__inactive 0 -#define R_ATA_CTRL_DATA__addr__BITNR 25 -#define R_ATA_CTRL_DATA__addr__WIDTH 3 -#define R_ATA_CTRL_DATA__rw__BITNR 24 -#define R_ATA_CTRL_DATA__rw__WIDTH 1 -#define R_ATA_CTRL_DATA__rw__read 1 -#define R_ATA_CTRL_DATA__rw__write 0 -#define R_ATA_CTRL_DATA__src_dst__BITNR 23 -#define R_ATA_CTRL_DATA__src_dst__WIDTH 1 -#define R_ATA_CTRL_DATA__src_dst__dma 1 -#define R_ATA_CTRL_DATA__src_dst__register 0 -#define R_ATA_CTRL_DATA__handsh__BITNR 22 -#define R_ATA_CTRL_DATA__handsh__WIDTH 1 -#define R_ATA_CTRL_DATA__handsh__dma 1 -#define R_ATA_CTRL_DATA__handsh__pio 0 -#define R_ATA_CTRL_DATA__multi__BITNR 21 -#define R_ATA_CTRL_DATA__multi__WIDTH 1 -#define R_ATA_CTRL_DATA__multi__on 1 -#define R_ATA_CTRL_DATA__multi__off 0 -#define R_ATA_CTRL_DATA__dma_size__BITNR 20 -#define R_ATA_CTRL_DATA__dma_size__WIDTH 1 -#define R_ATA_CTRL_DATA__dma_size__byte 1 -#define R_ATA_CTRL_DATA__dma_size__word 0 -#define R_ATA_CTRL_DATA__data__BITNR 0 -#define R_ATA_CTRL_DATA__data__WIDTH 16 - -#define R_ATA_STATUS_DATA (IO_TYPECAST_RO_UDWORD 0xb0000040) -#define R_ATA_STATUS_DATA__busy__BITNR 18 -#define R_ATA_STATUS_DATA__busy__WIDTH 1 -#define R_ATA_STATUS_DATA__busy__yes 1 -#define R_ATA_STATUS_DATA__busy__no 0 -#define R_ATA_STATUS_DATA__tr_rdy__BITNR 17 -#define R_ATA_STATUS_DATA__tr_rdy__WIDTH 1 -#define R_ATA_STATUS_DATA__tr_rdy__ready 1 -#define R_ATA_STATUS_DATA__tr_rdy__busy 0 -#define R_ATA_STATUS_DATA__dav__BITNR 16 -#define R_ATA_STATUS_DATA__dav__WIDTH 1 -#define R_ATA_STATUS_DATA__dav__data 1 -#define R_ATA_STATUS_DATA__dav__nodata 0 -#define R_ATA_STATUS_DATA__data__BITNR 0 -#define R_ATA_STATUS_DATA__data__WIDTH 16 - -#define R_ATA_CONFIG (IO_TYPECAST_UDWORD 0xb0000044) -#define R_ATA_CONFIG__enable__BITNR 25 -#define R_ATA_CONFIG__enable__WIDTH 1 -#define R_ATA_CONFIG__enable__on 1 -#define R_ATA_CONFIG__enable__off 0 -#define R_ATA_CONFIG__dma_strobe__BITNR 20 -#define R_ATA_CONFIG__dma_strobe__WIDTH 5 -#define R_ATA_CONFIG__dma_hold__BITNR 15 -#define R_ATA_CONFIG__dma_hold__WIDTH 5 -#define R_ATA_CONFIG__pio_setup__BITNR 10 -#define R_ATA_CONFIG__pio_setup__WIDTH 5 -#define R_ATA_CONFIG__pio_strobe__BITNR 5 -#define R_ATA_CONFIG__pio_strobe__WIDTH 5 -#define R_ATA_CONFIG__pio_hold__BITNR 0 -#define R_ATA_CONFIG__pio_hold__WIDTH 5 - -#define R_ATA_TRANSFER_CNT (IO_TYPECAST_UDWORD 0xb0000048) -#define R_ATA_TRANSFER_CNT__count__BITNR 0 -#define R_ATA_TRANSFER_CNT__count__WIDTH 17 - -/* -!* SCSI registers -!*/ - -#define R_SCSI0_CTRL (IO_TYPECAST_UDWORD 0xb0000044) -#define R_SCSI0_CTRL__id_type__BITNR 31 -#define R_SCSI0_CTRL__id_type__WIDTH 1 -#define R_SCSI0_CTRL__id_type__software 1 -#define R_SCSI0_CTRL__id_type__hardware 0 -#define R_SCSI0_CTRL__sel_timeout__BITNR 24 -#define R_SCSI0_CTRL__sel_timeout__WIDTH 7 -#define R_SCSI0_CTRL__synch_per__BITNR 16 -#define R_SCSI0_CTRL__synch_per__WIDTH 8 -#define R_SCSI0_CTRL__rst__BITNR 15 -#define R_SCSI0_CTRL__rst__WIDTH 1 -#define R_SCSI0_CTRL__rst__yes 1 -#define R_SCSI0_CTRL__rst__no 0 -#define R_SCSI0_CTRL__atn__BITNR 14 -#define R_SCSI0_CTRL__atn__WIDTH 1 -#define R_SCSI0_CTRL__atn__yes 1 -#define R_SCSI0_CTRL__atn__no 0 -#define R_SCSI0_CTRL__my_id__BITNR 9 -#define R_SCSI0_CTRL__my_id__WIDTH 4 -#define R_SCSI0_CTRL__target_id__BITNR 4 -#define R_SCSI0_CTRL__target_id__WIDTH 4 -#define R_SCSI0_CTRL__fast_20__BITNR 3 -#define R_SCSI0_CTRL__fast_20__WIDTH 1 -#define R_SCSI0_CTRL__fast_20__yes 1 -#define R_SCSI0_CTRL__fast_20__no 0 -#define R_SCSI0_CTRL__bus_width__BITNR 2 -#define R_SCSI0_CTRL__bus_width__WIDTH 1 -#define R_SCSI0_CTRL__bus_width__wide 1 -#define R_SCSI0_CTRL__bus_width__narrow 0 -#define R_SCSI0_CTRL__synch__BITNR 1 -#define R_SCSI0_CTRL__synch__WIDTH 1 -#define R_SCSI0_CTRL__synch__synch 1 -#define R_SCSI0_CTRL__synch__asynch 0 -#define R_SCSI0_CTRL__enable__BITNR 0 -#define R_SCSI0_CTRL__enable__WIDTH 1 -#define R_SCSI0_CTRL__enable__on 1 -#define R_SCSI0_CTRL__enable__off 0 - -#define R_SCSI0_CMD_DATA (IO_TYPECAST_UDWORD 0xb0000040) -#define R_SCSI0_CMD_DATA__parity_in__BITNR 26 -#define R_SCSI0_CMD_DATA__parity_in__WIDTH 1 -#define R_SCSI0_CMD_DATA__parity_in__on 0 -#define R_SCSI0_CMD_DATA__parity_in__off 1 -#define R_SCSI0_CMD_DATA__skip__BITNR 25 -#define R_SCSI0_CMD_DATA__skip__WIDTH 1 -#define R_SCSI0_CMD_DATA__skip__on 1 -#define R_SCSI0_CMD_DATA__skip__off 0 -#define R_SCSI0_CMD_DATA__clr_status__BITNR 24 -#define R_SCSI0_CMD_DATA__clr_status__WIDTH 1 -#define R_SCSI0_CMD_DATA__clr_status__yes 1 -#define R_SCSI0_CMD_DATA__clr_status__nop 0 -#define R_SCSI0_CMD_DATA__asynch_setup__BITNR 20 -#define R_SCSI0_CMD_DATA__asynch_setup__WIDTH 4 -#define R_SCSI0_CMD_DATA__command__BITNR 16 -#define R_SCSI0_CMD_DATA__command__WIDTH 4 -#define R_SCSI0_CMD_DATA__command__full_din_1 0 -#define R_SCSI0_CMD_DATA__command__full_dout_1 1 -#define R_SCSI0_CMD_DATA__command__full_stat_1 2 -#define R_SCSI0_CMD_DATA__command__resel_din 3 -#define R_SCSI0_CMD_DATA__command__resel_dout 4 -#define R_SCSI0_CMD_DATA__command__resel_stat 5 -#define R_SCSI0_CMD_DATA__command__arb_only 6 -#define R_SCSI0_CMD_DATA__command__full_din_3 8 -#define R_SCSI0_CMD_DATA__command__full_dout_3 9 -#define R_SCSI0_CMD_DATA__command__full_stat_3 10 -#define R_SCSI0_CMD_DATA__command__man_data_in 11 -#define R_SCSI0_CMD_DATA__command__man_data_out 12 -#define R_SCSI0_CMD_DATA__command__man_rat 13 -#define R_SCSI0_CMD_DATA__data_out__BITNR 0 -#define R_SCSI0_CMD_DATA__data_out__WIDTH 16 - -#define R_SCSI0_DATA (IO_TYPECAST_UWORD 0xb0000040) -#define R_SCSI0_DATA__data_out__BITNR 0 -#define R_SCSI0_DATA__data_out__WIDTH 16 - -#define R_SCSI0_CMD (IO_TYPECAST_BYTE 0xb0000042) -#define R_SCSI0_CMD__asynch_setup__BITNR 4 -#define R_SCSI0_CMD__asynch_setup__WIDTH 4 -#define R_SCSI0_CMD__command__BITNR 0 -#define R_SCSI0_CMD__command__WIDTH 4 -#define R_SCSI0_CMD__command__full_din_1 0 -#define R_SCSI0_CMD__command__full_dout_1 1 -#define R_SCSI0_CMD__command__full_stat_1 2 -#define R_SCSI0_CMD__command__resel_din 3 -#define R_SCSI0_CMD__command__resel_dout 4 -#define R_SCSI0_CMD__command__resel_stat 5 -#define R_SCSI0_CMD__command__arb_only 6 -#define R_SCSI0_CMD__command__full_din_3 8 -#define R_SCSI0_CMD__command__full_dout_3 9 -#define R_SCSI0_CMD__command__full_stat_3 10 -#define R_SCSI0_CMD__command__man_data_in 11 -#define R_SCSI0_CMD__command__man_data_out 12 -#define R_SCSI0_CMD__command__man_rat 13 - -#define R_SCSI0_STATUS_CTRL (IO_TYPECAST_BYTE 0xb0000043) -#define R_SCSI0_STATUS_CTRL__parity_in__BITNR 2 -#define R_SCSI0_STATUS_CTRL__parity_in__WIDTH 1 -#define R_SCSI0_STATUS_CTRL__parity_in__on 0 -#define R_SCSI0_STATUS_CTRL__parity_in__off 1 -#define R_SCSI0_STATUS_CTRL__skip__BITNR 1 -#define R_SCSI0_STATUS_CTRL__skip__WIDTH 1 -#define R_SCSI0_STATUS_CTRL__skip__on 1 -#define R_SCSI0_STATUS_CTRL__skip__off 0 -#define R_SCSI0_STATUS_CTRL__clr_status__BITNR 0 -#define R_SCSI0_STATUS_CTRL__clr_status__WIDTH 1 -#define R_SCSI0_STATUS_CTRL__clr_status__yes 1 -#define R_SCSI0_STATUS_CTRL__clr_status__nop 0 - -#define R_SCSI0_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000048) -#define R_SCSI0_STATUS__tst_arb_won__BITNR 23 -#define R_SCSI0_STATUS__tst_arb_won__WIDTH 1 -#define R_SCSI0_STATUS__tst_resel__BITNR 22 -#define R_SCSI0_STATUS__tst_resel__WIDTH 1 -#define R_SCSI0_STATUS__parity_error__BITNR 21 -#define R_SCSI0_STATUS__parity_error__WIDTH 1 -#define R_SCSI0_STATUS__bus_reset__BITNR 20 -#define R_SCSI0_STATUS__bus_reset__WIDTH 1 -#define R_SCSI0_STATUS__bus_reset__yes 1 -#define R_SCSI0_STATUS__bus_reset__no 0 -#define R_SCSI0_STATUS__resel_target__BITNR 15 -#define R_SCSI0_STATUS__resel_target__WIDTH 4 -#define R_SCSI0_STATUS__resel__BITNR 14 -#define R_SCSI0_STATUS__resel__WIDTH 1 -#define R_SCSI0_STATUS__resel__yes 1 -#define R_SCSI0_STATUS__resel__no 0 -#define R_SCSI0_STATUS__curr_phase__BITNR 11 -#define R_SCSI0_STATUS__curr_phase__WIDTH 3 -#define R_SCSI0_STATUS__curr_phase__ph_undef 0 -#define R_SCSI0_STATUS__curr_phase__ph_msg_in 7 -#define R_SCSI0_STATUS__curr_phase__ph_msg_out 6 -#define R_SCSI0_STATUS__curr_phase__ph_status 3 -#define R_SCSI0_STATUS__curr_phase__ph_command 2 -#define R_SCSI0_STATUS__curr_phase__ph_data_in 5 -#define R_SCSI0_STATUS__curr_phase__ph_data_out 4 -#define R_SCSI0_STATUS__curr_phase__ph_resel 1 -#define R_SCSI0_STATUS__last_seq_step__BITNR 6 -#define R_SCSI0_STATUS__last_seq_step__WIDTH 5 -#define R_SCSI0_STATUS__last_seq_step__st_bus_free 24 -#define R_SCSI0_STATUS__last_seq_step__st_arbitrate 8 -#define R_SCSI0_STATUS__last_seq_step__st_resel_req 29 -#define R_SCSI0_STATUS__last_seq_step__st_msg_1 2 -#define R_SCSI0_STATUS__last_seq_step__st_manual 28 -#define R_SCSI0_STATUS__last_seq_step__st_transf_cmd 30 -#define R_SCSI0_STATUS__last_seq_step__st_msg_2 6 -#define R_SCSI0_STATUS__last_seq_step__st_msg_3 22 -#define R_SCSI0_STATUS__last_seq_step__st_answer 3 -#define R_SCSI0_STATUS__last_seq_step__st_synch_din_perr 1 -#define R_SCSI0_STATUS__last_seq_step__st_transfer_done 15 -#define R_SCSI0_STATUS__last_seq_step__st_synch_dout 0 -#define R_SCSI0_STATUS__last_seq_step__st_asynch_dout 25 -#define R_SCSI0_STATUS__last_seq_step__st_synch_din 13 -#define R_SCSI0_STATUS__last_seq_step__st_asynch_din 9 -#define R_SCSI0_STATUS__last_seq_step__st_synch_dout_ack 4 -#define R_SCSI0_STATUS__last_seq_step__st_synch_din_ack 12 -#define R_SCSI0_STATUS__last_seq_step__st_synch_din_ack_perr 5 -#define R_SCSI0_STATUS__last_seq_step__st_asynch_dout_end 11 -#define R_SCSI0_STATUS__last_seq_step__st_iwr 27 -#define R_SCSI0_STATUS__last_seq_step__st_wait_free_disc 21 -#define R_SCSI0_STATUS__last_seq_step__st_sdp_disc 7 -#define R_SCSI0_STATUS__last_seq_step__st_cc 31 -#define R_SCSI0_STATUS__last_seq_step__st_iwr_good 14 -#define R_SCSI0_STATUS__last_seq_step__st_iwr_cc 23 -#define R_SCSI0_STATUS__last_seq_step__st_wait_free_iwr_cc 17 -#define R_SCSI0_STATUS__last_seq_step__st_wait_free_cc 20 -#define R_SCSI0_STATUS__last_seq_step__st_wait_free_sdp_disc 16 -#define R_SCSI0_STATUS__last_seq_step__st_manual_req 10 -#define R_SCSI0_STATUS__last_seq_step__st_manual_din_prot 18 -#define R_SCSI0_STATUS__valid_status__BITNR 5 -#define R_SCSI0_STATUS__valid_status__WIDTH 1 -#define R_SCSI0_STATUS__valid_status__yes 1 -#define R_SCSI0_STATUS__valid_status__no 0 -#define R_SCSI0_STATUS__seq_status__BITNR 0 -#define R_SCSI0_STATUS__seq_status__WIDTH 5 -#define R_SCSI0_STATUS__seq_status__info_seq_complete 0 -#define R_SCSI0_STATUS__seq_status__info_parity_error 1 -#define R_SCSI0_STATUS__seq_status__info_unhandled_msg_in 2 -#define R_SCSI0_STATUS__seq_status__info_unexp_ph_change 3 -#define R_SCSI0_STATUS__seq_status__info_arb_lost 4 -#define R_SCSI0_STATUS__seq_status__info_sel_timeout 5 -#define R_SCSI0_STATUS__seq_status__info_unexp_bf 6 -#define R_SCSI0_STATUS__seq_status__info_illegal_op 7 -#define R_SCSI0_STATUS__seq_status__info_rec_recvd 8 -#define R_SCSI0_STATUS__seq_status__info_reselected 9 -#define R_SCSI0_STATUS__seq_status__info_unhandled_status 10 -#define R_SCSI0_STATUS__seq_status__info_bus_reset 11 -#define R_SCSI0_STATUS__seq_status__info_illegal_bf 12 -#define R_SCSI0_STATUS__seq_status__info_bus_free 13 - -#define R_SCSI0_DATA_IN (IO_TYPECAST_RO_UWORD 0xb0000040) -#define R_SCSI0_DATA_IN__data_in__BITNR 0 -#define R_SCSI0_DATA_IN__data_in__WIDTH 16 - -#define R_SCSI1_CTRL (IO_TYPECAST_UDWORD 0xb0000054) -#define R_SCSI1_CTRL__id_type__BITNR 31 -#define R_SCSI1_CTRL__id_type__WIDTH 1 -#define R_SCSI1_CTRL__id_type__software 1 -#define R_SCSI1_CTRL__id_type__hardware 0 -#define R_SCSI1_CTRL__sel_timeout__BITNR 24 -#define R_SCSI1_CTRL__sel_timeout__WIDTH 7 -#define R_SCSI1_CTRL__synch_per__BITNR 16 -#define R_SCSI1_CTRL__synch_per__WIDTH 8 -#define R_SCSI1_CTRL__rst__BITNR 15 -#define R_SCSI1_CTRL__rst__WIDTH 1 -#define R_SCSI1_CTRL__rst__yes 1 -#define R_SCSI1_CTRL__rst__no 0 -#define R_SCSI1_CTRL__atn__BITNR 14 -#define R_SCSI1_CTRL__atn__WIDTH 1 -#define R_SCSI1_CTRL__atn__yes 1 -#define R_SCSI1_CTRL__atn__no 0 -#define R_SCSI1_CTRL__my_id__BITNR 9 -#define R_SCSI1_CTRL__my_id__WIDTH 4 -#define R_SCSI1_CTRL__target_id__BITNR 4 -#define R_SCSI1_CTRL__target_id__WIDTH 4 -#define R_SCSI1_CTRL__fast_20__BITNR 3 -#define R_SCSI1_CTRL__fast_20__WIDTH 1 -#define R_SCSI1_CTRL__fast_20__yes 1 -#define R_SCSI1_CTRL__fast_20__no 0 -#define R_SCSI1_CTRL__bus_width__BITNR 2 -#define R_SCSI1_CTRL__bus_width__WIDTH 1 -#define R_SCSI1_CTRL__bus_width__wide 1 -#define R_SCSI1_CTRL__bus_width__narrow 0 -#define R_SCSI1_CTRL__synch__BITNR 1 -#define R_SCSI1_CTRL__synch__WIDTH 1 -#define R_SCSI1_CTRL__synch__synch 1 -#define R_SCSI1_CTRL__synch__asynch 0 -#define R_SCSI1_CTRL__enable__BITNR 0 -#define R_SCSI1_CTRL__enable__WIDTH 1 -#define R_SCSI1_CTRL__enable__on 1 -#define R_SCSI1_CTRL__enable__off 0 - -#define R_SCSI1_CMD_DATA (IO_TYPECAST_UDWORD 0xb0000050) -#define R_SCSI1_CMD_DATA__parity_in__BITNR 26 -#define R_SCSI1_CMD_DATA__parity_in__WIDTH 1 -#define R_SCSI1_CMD_DATA__parity_in__on 0 -#define R_SCSI1_CMD_DATA__parity_in__off 1 -#define R_SCSI1_CMD_DATA__skip__BITNR 25 -#define R_SCSI1_CMD_DATA__skip__WIDTH 1 -#define R_SCSI1_CMD_DATA__skip__on 1 -#define R_SCSI1_CMD_DATA__skip__off 0 -#define R_SCSI1_CMD_DATA__clr_status__BITNR 24 -#define R_SCSI1_CMD_DATA__clr_status__WIDTH 1 -#define R_SCSI1_CMD_DATA__clr_status__yes 1 -#define R_SCSI1_CMD_DATA__clr_status__nop 0 -#define R_SCSI1_CMD_DATA__asynch_setup__BITNR 20 -#define R_SCSI1_CMD_DATA__asynch_setup__WIDTH 4 -#define R_SCSI1_CMD_DATA__command__BITNR 16 -#define R_SCSI1_CMD_DATA__command__WIDTH 4 -#define R_SCSI1_CMD_DATA__command__full_din_1 0 -#define R_SCSI1_CMD_DATA__command__full_dout_1 1 -#define R_SCSI1_CMD_DATA__command__full_stat_1 2 -#define R_SCSI1_CMD_DATA__command__resel_din 3 -#define R_SCSI1_CMD_DATA__command__resel_dout 4 -#define R_SCSI1_CMD_DATA__command__resel_stat 5 -#define R_SCSI1_CMD_DATA__command__arb_only 6 -#define R_SCSI1_CMD_DATA__command__full_din_3 8 -#define R_SCSI1_CMD_DATA__command__full_dout_3 9 -#define R_SCSI1_CMD_DATA__command__full_stat_3 10 -#define R_SCSI1_CMD_DATA__command__man_data_in 11 -#define R_SCSI1_CMD_DATA__command__man_data_out 12 -#define R_SCSI1_CMD_DATA__command__man_rat 13 -#define R_SCSI1_CMD_DATA__data_out__BITNR 0 -#define R_SCSI1_CMD_DATA__data_out__WIDTH 16 - -#define R_SCSI1_DATA (IO_TYPECAST_UWORD 0xb0000050) -#define R_SCSI1_DATA__data_out__BITNR 0 -#define R_SCSI1_DATA__data_out__WIDTH 16 - -#define R_SCSI1_CMD (IO_TYPECAST_BYTE 0xb0000052) -#define R_SCSI1_CMD__asynch_setup__BITNR 4 -#define R_SCSI1_CMD__asynch_setup__WIDTH 4 -#define R_SCSI1_CMD__command__BITNR 0 -#define R_SCSI1_CMD__command__WIDTH 4 -#define R_SCSI1_CMD__command__full_din_1 0 -#define R_SCSI1_CMD__command__full_dout_1 1 -#define R_SCSI1_CMD__command__full_stat_1 2 -#define R_SCSI1_CMD__command__resel_din 3 -#define R_SCSI1_CMD__command__resel_dout 4 -#define R_SCSI1_CMD__command__resel_stat 5 -#define R_SCSI1_CMD__command__arb_only 6 -#define R_SCSI1_CMD__command__full_din_3 8 -#define R_SCSI1_CMD__command__full_dout_3 9 -#define R_SCSI1_CMD__command__full_stat_3 10 -#define R_SCSI1_CMD__command__man_data_in 11 -#define R_SCSI1_CMD__command__man_data_out 12 -#define R_SCSI1_CMD__command__man_rat 13 - -#define R_SCSI1_STATUS_CTRL (IO_TYPECAST_BYTE 0xb0000053) -#define R_SCSI1_STATUS_CTRL__parity_in__BITNR 2 -#define R_SCSI1_STATUS_CTRL__parity_in__WIDTH 1 -#define R_SCSI1_STATUS_CTRL__parity_in__on 0 -#define R_SCSI1_STATUS_CTRL__parity_in__off 1 -#define R_SCSI1_STATUS_CTRL__skip__BITNR 1 -#define R_SCSI1_STATUS_CTRL__skip__WIDTH 1 -#define R_SCSI1_STATUS_CTRL__skip__on 1 -#define R_SCSI1_STATUS_CTRL__skip__off 0 -#define R_SCSI1_STATUS_CTRL__clr_status__BITNR 0 -#define R_SCSI1_STATUS_CTRL__clr_status__WIDTH 1 -#define R_SCSI1_STATUS_CTRL__clr_status__yes 1 -#define R_SCSI1_STATUS_CTRL__clr_status__nop 0 - -#define R_SCSI1_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000058) -#define R_SCSI1_STATUS__tst_arb_won__BITNR 23 -#define R_SCSI1_STATUS__tst_arb_won__WIDTH 1 -#define R_SCSI1_STATUS__tst_resel__BITNR 22 -#define R_SCSI1_STATUS__tst_resel__WIDTH 1 -#define R_SCSI1_STATUS__parity_error__BITNR 21 -#define R_SCSI1_STATUS__parity_error__WIDTH 1 -#define R_SCSI1_STATUS__bus_reset__BITNR 20 -#define R_SCSI1_STATUS__bus_reset__WIDTH 1 -#define R_SCSI1_STATUS__bus_reset__yes 1 -#define R_SCSI1_STATUS__bus_reset__no 0 -#define R_SCSI1_STATUS__resel_target__BITNR 15 -#define R_SCSI1_STATUS__resel_target__WIDTH 4 -#define R_SCSI1_STATUS__resel__BITNR 14 -#define R_SCSI1_STATUS__resel__WIDTH 1 -#define R_SCSI1_STATUS__resel__yes 1 -#define R_SCSI1_STATUS__resel__no 0 -#define R_SCSI1_STATUS__curr_phase__BITNR 11 -#define R_SCSI1_STATUS__curr_phase__WIDTH 3 -#define R_SCSI1_STATUS__curr_phase__ph_undef 0 -#define R_SCSI1_STATUS__curr_phase__ph_msg_in 7 -#define R_SCSI1_STATUS__curr_phase__ph_msg_out 6 -#define R_SCSI1_STATUS__curr_phase__ph_status 3 -#define R_SCSI1_STATUS__curr_phase__ph_command 2 -#define R_SCSI1_STATUS__curr_phase__ph_data_in 5 -#define R_SCSI1_STATUS__curr_phase__ph_data_out 4 -#define R_SCSI1_STATUS__curr_phase__ph_resel 1 -#define R_SCSI1_STATUS__last_seq_step__BITNR 6 -#define R_SCSI1_STATUS__last_seq_step__WIDTH 5 -#define R_SCSI1_STATUS__last_seq_step__st_bus_free 24 -#define R_SCSI1_STATUS__last_seq_step__st_arbitrate 8 -#define R_SCSI1_STATUS__last_seq_step__st_resel_req 29 -#define R_SCSI1_STATUS__last_seq_step__st_msg_1 2 -#define R_SCSI1_STATUS__last_seq_step__st_manual 28 -#define R_SCSI1_STATUS__last_seq_step__st_transf_cmd 30 -#define R_SCSI1_STATUS__last_seq_step__st_msg_2 6 -#define R_SCSI1_STATUS__last_seq_step__st_msg_3 22 -#define R_SCSI1_STATUS__last_seq_step__st_answer 3 -#define R_SCSI1_STATUS__last_seq_step__st_synch_din_perr 1 -#define R_SCSI1_STATUS__last_seq_step__st_transfer_done 15 -#define R_SCSI1_STATUS__last_seq_step__st_synch_dout 0 -#define R_SCSI1_STATUS__last_seq_step__st_asynch_dout 25 -#define R_SCSI1_STATUS__last_seq_step__st_synch_din 13 -#define R_SCSI1_STATUS__last_seq_step__st_asynch_din 9 -#define R_SCSI1_STATUS__last_seq_step__st_synch_dout_ack 4 -#define R_SCSI1_STATUS__last_seq_step__st_synch_din_ack 12 -#define R_SCSI1_STATUS__last_seq_step__st_synch_din_ack_perr 5 -#define R_SCSI1_STATUS__last_seq_step__st_asynch_dout_end 11 -#define R_SCSI1_STATUS__last_seq_step__st_iwr 27 -#define R_SCSI1_STATUS__last_seq_step__st_wait_free_disc 21 -#define R_SCSI1_STATUS__last_seq_step__st_sdp_disc 7 -#define R_SCSI1_STATUS__last_seq_step__st_cc 31 -#define R_SCSI1_STATUS__last_seq_step__st_iwr_good 14 -#define R_SCSI1_STATUS__last_seq_step__st_iwr_cc 23 -#define R_SCSI1_STATUS__last_seq_step__st_wait_free_iwr_cc 17 -#define R_SCSI1_STATUS__last_seq_step__st_wait_free_cc 20 -#define R_SCSI1_STATUS__last_seq_step__st_wait_free_sdp_disc 16 -#define R_SCSI1_STATUS__last_seq_step__st_manual_req 10 -#define R_SCSI1_STATUS__last_seq_step__st_manual_din_prot 18 -#define R_SCSI1_STATUS__valid_status__BITNR 5 -#define R_SCSI1_STATUS__valid_status__WIDTH 1 -#define R_SCSI1_STATUS__valid_status__yes 1 -#define R_SCSI1_STATUS__valid_status__no 0 -#define R_SCSI1_STATUS__seq_status__BITNR 0 -#define R_SCSI1_STATUS__seq_status__WIDTH 5 -#define R_SCSI1_STATUS__seq_status__info_seq_complete 0 -#define R_SCSI1_STATUS__seq_status__info_parity_error 1 -#define R_SCSI1_STATUS__seq_status__info_unhandled_msg_in 2 -#define R_SCSI1_STATUS__seq_status__info_unexp_ph_change 3 -#define R_SCSI1_STATUS__seq_status__info_arb_lost 4 -#define R_SCSI1_STATUS__seq_status__info_sel_timeout 5 -#define R_SCSI1_STATUS__seq_status__info_unexp_bf 6 -#define R_SCSI1_STATUS__seq_status__info_illegal_op 7 -#define R_SCSI1_STATUS__seq_status__info_rec_recvd 8 -#define R_SCSI1_STATUS__seq_status__info_reselected 9 -#define R_SCSI1_STATUS__seq_status__info_unhandled_status 10 -#define R_SCSI1_STATUS__seq_status__info_bus_reset 11 -#define R_SCSI1_STATUS__seq_status__info_illegal_bf 12 -#define R_SCSI1_STATUS__seq_status__info_bus_free 13 - -#define R_SCSI1_DATA_IN (IO_TYPECAST_RO_UWORD 0xb0000050) -#define R_SCSI1_DATA_IN__data_in__BITNR 0 -#define R_SCSI1_DATA_IN__data_in__WIDTH 16 - -/* -!* Interrupt mask and status registers -!*/ - -#define R_IRQ_MASK0_RD (IO_TYPECAST_RO_UDWORD 0xb00000c0) -#define R_IRQ_MASK0_RD__nmi_pin__BITNR 31 -#define R_IRQ_MASK0_RD__nmi_pin__WIDTH 1 -#define R_IRQ_MASK0_RD__nmi_pin__active 1 -#define R_IRQ_MASK0_RD__nmi_pin__inactive 0 -#define R_IRQ_MASK0_RD__watchdog_nmi__BITNR 30 -#define R_IRQ_MASK0_RD__watchdog_nmi__WIDTH 1 -#define R_IRQ_MASK0_RD__watchdog_nmi__active 1 -#define R_IRQ_MASK0_RD__watchdog_nmi__inactive 0 -#define R_IRQ_MASK0_RD__sqe_test_error__BITNR 29 -#define R_IRQ_MASK0_RD__sqe_test_error__WIDTH 1 -#define R_IRQ_MASK0_RD__sqe_test_error__active 1 -#define R_IRQ_MASK0_RD__sqe_test_error__inactive 0 -#define R_IRQ_MASK0_RD__carrier_loss__BITNR 28 -#define R_IRQ_MASK0_RD__carrier_loss__WIDTH 1 -#define R_IRQ_MASK0_RD__carrier_loss__active 1 -#define R_IRQ_MASK0_RD__carrier_loss__inactive 0 -#define R_IRQ_MASK0_RD__deferred__BITNR 27 -#define R_IRQ_MASK0_RD__deferred__WIDTH 1 -#define R_IRQ_MASK0_RD__deferred__active 1 -#define R_IRQ_MASK0_RD__deferred__inactive 0 -#define R_IRQ_MASK0_RD__late_col__BITNR 26 -#define R_IRQ_MASK0_RD__late_col__WIDTH 1 -#define R_IRQ_MASK0_RD__late_col__active 1 -#define R_IRQ_MASK0_RD__late_col__inactive 0 -#define R_IRQ_MASK0_RD__multiple_col__BITNR 25 -#define R_IRQ_MASK0_RD__multiple_col__WIDTH 1 -#define R_IRQ_MASK0_RD__multiple_col__active 1 -#define R_IRQ_MASK0_RD__multiple_col__inactive 0 -#define R_IRQ_MASK0_RD__single_col__BITNR 24 -#define R_IRQ_MASK0_RD__single_col__WIDTH 1 -#define R_IRQ_MASK0_RD__single_col__active 1 -#define R_IRQ_MASK0_RD__single_col__inactive 0 -#define R_IRQ_MASK0_RD__congestion__BITNR 23 -#define R_IRQ_MASK0_RD__congestion__WIDTH 1 -#define R_IRQ_MASK0_RD__congestion__active 1 -#define R_IRQ_MASK0_RD__congestion__inactive 0 -#define R_IRQ_MASK0_RD__oversize__BITNR 22 -#define R_IRQ_MASK0_RD__oversize__WIDTH 1 -#define R_IRQ_MASK0_RD__oversize__active 1 -#define R_IRQ_MASK0_RD__oversize__inactive 0 -#define R_IRQ_MASK0_RD__alignment_error__BITNR 21 -#define R_IRQ_MASK0_RD__alignment_error__WIDTH 1 -#define R_IRQ_MASK0_RD__alignment_error__active 1 -#define R_IRQ_MASK0_RD__alignment_error__inactive 0 -#define R_IRQ_MASK0_RD__crc_error__BITNR 20 -#define R_IRQ_MASK0_RD__crc_error__WIDTH 1 -#define R_IRQ_MASK0_RD__crc_error__active 1 -#define R_IRQ_MASK0_RD__crc_error__inactive 0 -#define R_IRQ_MASK0_RD__overrun__BITNR 19 -#define R_IRQ_MASK0_RD__overrun__WIDTH 1 -#define R_IRQ_MASK0_RD__overrun__active 1 -#define R_IRQ_MASK0_RD__overrun__inactive 0 -#define R_IRQ_MASK0_RD__underrun__BITNR 18 -#define R_IRQ_MASK0_RD__underrun__WIDTH 1 -#define R_IRQ_MASK0_RD__underrun__active 1 -#define R_IRQ_MASK0_RD__underrun__inactive 0 -#define R_IRQ_MASK0_RD__excessive_col__BITNR 17 -#define R_IRQ_MASK0_RD__excessive_col__WIDTH 1 -#define R_IRQ_MASK0_RD__excessive_col__active 1 -#define R_IRQ_MASK0_RD__excessive_col__inactive 0 -#define R_IRQ_MASK0_RD__mdio__BITNR 16 -#define R_IRQ_MASK0_RD__mdio__WIDTH 1 -#define R_IRQ_MASK0_RD__mdio__active 1 -#define R_IRQ_MASK0_RD__mdio__inactive 0 -#define R_IRQ_MASK0_RD__ata_drq3__BITNR 15 -#define R_IRQ_MASK0_RD__ata_drq3__WIDTH 1 -#define R_IRQ_MASK0_RD__ata_drq3__active 1 -#define R_IRQ_MASK0_RD__ata_drq3__inactive 0 -#define R_IRQ_MASK0_RD__ata_drq2__BITNR 14 -#define R_IRQ_MASK0_RD__ata_drq2__WIDTH 1 -#define R_IRQ_MASK0_RD__ata_drq2__active 1 -#define R_IRQ_MASK0_RD__ata_drq2__inactive 0 -#define R_IRQ_MASK0_RD__ata_drq1__BITNR 13 -#define R_IRQ_MASK0_RD__ata_drq1__WIDTH 1 -#define R_IRQ_MASK0_RD__ata_drq1__active 1 -#define R_IRQ_MASK0_RD__ata_drq1__inactive 0 -#define R_IRQ_MASK0_RD__ata_drq0__BITNR 12 -#define R_IRQ_MASK0_RD__ata_drq0__WIDTH 1 -#define R_IRQ_MASK0_RD__ata_drq0__active 1 -#define R_IRQ_MASK0_RD__ata_drq0__inactive 0 -#define R_IRQ_MASK0_RD__par0_ecp_cmd__BITNR 11 -#define R_IRQ_MASK0_RD__par0_ecp_cmd__WIDTH 1 -#define R_IRQ_MASK0_RD__par0_ecp_cmd__active 1 -#define R_IRQ_MASK0_RD__par0_ecp_cmd__inactive 0 -#define R_IRQ_MASK0_RD__ata_irq3__BITNR 11 -#define R_IRQ_MASK0_RD__ata_irq3__WIDTH 1 -#define R_IRQ_MASK0_RD__ata_irq3__active 1 -#define R_IRQ_MASK0_RD__ata_irq3__inactive 0 -#define R_IRQ_MASK0_RD__par0_peri__BITNR 10 -#define R_IRQ_MASK0_RD__par0_peri__WIDTH 1 -#define R_IRQ_MASK0_RD__par0_peri__active 1 -#define R_IRQ_MASK0_RD__par0_peri__inactive 0 -#define R_IRQ_MASK0_RD__ata_irq2__BITNR 10 -#define R_IRQ_MASK0_RD__ata_irq2__WIDTH 1 -#define R_IRQ_MASK0_RD__ata_irq2__active 1 -#define R_IRQ_MASK0_RD__ata_irq2__inactive 0 -#define R_IRQ_MASK0_RD__par0_data__BITNR 9 -#define R_IRQ_MASK0_RD__par0_data__WIDTH 1 -#define R_IRQ_MASK0_RD__par0_data__active 1 -#define R_IRQ_MASK0_RD__par0_data__inactive 0 -#define R_IRQ_MASK0_RD__ata_irq1__BITNR 9 -#define R_IRQ_MASK0_RD__ata_irq1__WIDTH 1 -#define R_IRQ_MASK0_RD__ata_irq1__active 1 -#define R_IRQ_MASK0_RD__ata_irq1__inactive 0 -#define R_IRQ_MASK0_RD__par0_ready__BITNR 8 -#define R_IRQ_MASK0_RD__par0_ready__WIDTH 1 -#define R_IRQ_MASK0_RD__par0_ready__active 1 -#define R_IRQ_MASK0_RD__par0_ready__inactive 0 -#define R_IRQ_MASK0_RD__ata_irq0__BITNR 8 -#define R_IRQ_MASK0_RD__ata_irq0__WIDTH 1 -#define R_IRQ_MASK0_RD__ata_irq0__active 1 -#define R_IRQ_MASK0_RD__ata_irq0__inactive 0 -#define R_IRQ_MASK0_RD__mio__BITNR 8 -#define R_IRQ_MASK0_RD__mio__WIDTH 1 -#define R_IRQ_MASK0_RD__mio__active 1 -#define R_IRQ_MASK0_RD__mio__inactive 0 -#define R_IRQ_MASK0_RD__scsi0__BITNR 8 -#define R_IRQ_MASK0_RD__scsi0__WIDTH 1 -#define R_IRQ_MASK0_RD__scsi0__active 1 -#define R_IRQ_MASK0_RD__scsi0__inactive 0 -#define R_IRQ_MASK0_RD__ata_dmaend__BITNR 7 -#define R_IRQ_MASK0_RD__ata_dmaend__WIDTH 1 -#define R_IRQ_MASK0_RD__ata_dmaend__active 1 -#define R_IRQ_MASK0_RD__ata_dmaend__inactive 0 -#define R_IRQ_MASK0_RD__irq_ext_vector_nr__BITNR 5 -#define R_IRQ_MASK0_RD__irq_ext_vector_nr__WIDTH 1 -#define R_IRQ_MASK0_RD__irq_ext_vector_nr__active 1 -#define R_IRQ_MASK0_RD__irq_ext_vector_nr__inactive 0 -#define R_IRQ_MASK0_RD__irq_int_vector_nr__BITNR 4 -#define R_IRQ_MASK0_RD__irq_int_vector_nr__WIDTH 1 -#define R_IRQ_MASK0_RD__irq_int_vector_nr__active 1 -#define R_IRQ_MASK0_RD__irq_int_vector_nr__inactive 0 -#define R_IRQ_MASK0_RD__ext_dma1__BITNR 3 -#define R_IRQ_MASK0_RD__ext_dma1__WIDTH 1 -#define R_IRQ_MASK0_RD__ext_dma1__active 1 -#define R_IRQ_MASK0_RD__ext_dma1__inactive 0 -#define R_IRQ_MASK0_RD__ext_dma0__BITNR 2 -#define R_IRQ_MASK0_RD__ext_dma0__WIDTH 1 -#define R_IRQ_MASK0_RD__ext_dma0__active 1 -#define R_IRQ_MASK0_RD__ext_dma0__inactive 0 -#define R_IRQ_MASK0_RD__timer1__BITNR 1 -#define R_IRQ_MASK0_RD__timer1__WIDTH 1 -#define R_IRQ_MASK0_RD__timer1__active 1 -#define R_IRQ_MASK0_RD__timer1__inactive 0 -#define R_IRQ_MASK0_RD__timer0__BITNR 0 -#define R_IRQ_MASK0_RD__timer0__WIDTH 1 -#define R_IRQ_MASK0_RD__timer0__active 1 -#define R_IRQ_MASK0_RD__timer0__inactive 0 - -#define R_IRQ_MASK0_CLR (IO_TYPECAST_UDWORD 0xb00000c0) -#define R_IRQ_MASK0_CLR__nmi_pin__BITNR 31 -#define R_IRQ_MASK0_CLR__nmi_pin__WIDTH 1 -#define R_IRQ_MASK0_CLR__nmi_pin__clr 1 -#define R_IRQ_MASK0_CLR__nmi_pin__nop 0 -#define R_IRQ_MASK0_CLR__watchdog_nmi__BITNR 30 -#define R_IRQ_MASK0_CLR__watchdog_nmi__WIDTH 1 -#define R_IRQ_MASK0_CLR__watchdog_nmi__clr 1 -#define R_IRQ_MASK0_CLR__watchdog_nmi__nop 0 -#define R_IRQ_MASK0_CLR__sqe_test_error__BITNR 29 -#define R_IRQ_MASK0_CLR__sqe_test_error__WIDTH 1 -#define R_IRQ_MASK0_CLR__sqe_test_error__clr 1 -#define R_IRQ_MASK0_CLR__sqe_test_error__nop 0 -#define R_IRQ_MASK0_CLR__carrier_loss__BITNR 28 -#define R_IRQ_MASK0_CLR__carrier_loss__WIDTH 1 -#define R_IRQ_MASK0_CLR__carrier_loss__clr 1 -#define R_IRQ_MASK0_CLR__carrier_loss__nop 0 -#define R_IRQ_MASK0_CLR__deferred__BITNR 27 -#define R_IRQ_MASK0_CLR__deferred__WIDTH 1 -#define R_IRQ_MASK0_CLR__deferred__clr 1 -#define R_IRQ_MASK0_CLR__deferred__nop 0 -#define R_IRQ_MASK0_CLR__late_col__BITNR 26 -#define R_IRQ_MASK0_CLR__late_col__WIDTH 1 -#define R_IRQ_MASK0_CLR__late_col__clr 1 -#define R_IRQ_MASK0_CLR__late_col__nop 0 -#define R_IRQ_MASK0_CLR__multiple_col__BITNR 25 -#define R_IRQ_MASK0_CLR__multiple_col__WIDTH 1 -#define R_IRQ_MASK0_CLR__multiple_col__clr 1 -#define R_IRQ_MASK0_CLR__multiple_col__nop 0 -#define R_IRQ_MASK0_CLR__single_col__BITNR 24 -#define R_IRQ_MASK0_CLR__single_col__WIDTH 1 -#define R_IRQ_MASK0_CLR__single_col__clr 1 -#define R_IRQ_MASK0_CLR__single_col__nop 0 -#define R_IRQ_MASK0_CLR__congestion__BITNR 23 -#define R_IRQ_MASK0_CLR__congestion__WIDTH 1 -#define R_IRQ_MASK0_CLR__congestion__clr 1 -#define R_IRQ_MASK0_CLR__congestion__nop 0 -#define R_IRQ_MASK0_CLR__oversize__BITNR 22 -#define R_IRQ_MASK0_CLR__oversize__WIDTH 1 -#define R_IRQ_MASK0_CLR__oversize__clr 1 -#define R_IRQ_MASK0_CLR__oversize__nop 0 -#define R_IRQ_MASK0_CLR__alignment_error__BITNR 21 -#define R_IRQ_MASK0_CLR__alignment_error__WIDTH 1 -#define R_IRQ_MASK0_CLR__alignment_error__clr 1 -#define R_IRQ_MASK0_CLR__alignment_error__nop 0 -#define R_IRQ_MASK0_CLR__crc_error__BITNR 20 -#define R_IRQ_MASK0_CLR__crc_error__WIDTH 1 -#define R_IRQ_MASK0_CLR__crc_error__clr 1 -#define R_IRQ_MASK0_CLR__crc_error__nop 0 -#define R_IRQ_MASK0_CLR__overrun__BITNR 19 -#define R_IRQ_MASK0_CLR__overrun__WIDTH 1 -#define R_IRQ_MASK0_CLR__overrun__clr 1 -#define R_IRQ_MASK0_CLR__overrun__nop 0 -#define R_IRQ_MASK0_CLR__underrun__BITNR 18 -#define R_IRQ_MASK0_CLR__underrun__WIDTH 1 -#define R_IRQ_MASK0_CLR__underrun__clr 1 -#define R_IRQ_MASK0_CLR__underrun__nop 0 -#define R_IRQ_MASK0_CLR__excessive_col__BITNR 17 -#define R_IRQ_MASK0_CLR__excessive_col__WIDTH 1 -#define R_IRQ_MASK0_CLR__excessive_col__clr 1 -#define R_IRQ_MASK0_CLR__excessive_col__nop 0 -#define R_IRQ_MASK0_CLR__mdio__BITNR 16 -#define R_IRQ_MASK0_CLR__mdio__WIDTH 1 -#define R_IRQ_MASK0_CLR__mdio__clr 1 -#define R_IRQ_MASK0_CLR__mdio__nop 0 -#define R_IRQ_MASK0_CLR__ata_drq3__BITNR 15 -#define R_IRQ_MASK0_CLR__ata_drq3__WIDTH 1 -#define R_IRQ_MASK0_CLR__ata_drq3__clr 1 -#define R_IRQ_MASK0_CLR__ata_drq3__nop 0 -#define R_IRQ_MASK0_CLR__ata_drq2__BITNR 14 -#define R_IRQ_MASK0_CLR__ata_drq2__WIDTH 1 -#define R_IRQ_MASK0_CLR__ata_drq2__clr 1 -#define R_IRQ_MASK0_CLR__ata_drq2__nop 0 -#define R_IRQ_MASK0_CLR__ata_drq1__BITNR 13 -#define R_IRQ_MASK0_CLR__ata_drq1__WIDTH 1 -#define R_IRQ_MASK0_CLR__ata_drq1__clr 1 -#define R_IRQ_MASK0_CLR__ata_drq1__nop 0 -#define R_IRQ_MASK0_CLR__ata_drq0__BITNR 12 -#define R_IRQ_MASK0_CLR__ata_drq0__WIDTH 1 -#define R_IRQ_MASK0_CLR__ata_drq0__clr 1 -#define R_IRQ_MASK0_CLR__ata_drq0__nop 0 -#define R_IRQ_MASK0_CLR__par0_ecp_cmd__BITNR 11 -#define R_IRQ_MASK0_CLR__par0_ecp_cmd__WIDTH 1 -#define R_IRQ_MASK0_CLR__par0_ecp_cmd__clr 1 -#define R_IRQ_MASK0_CLR__par0_ecp_cmd__nop 0 -#define R_IRQ_MASK0_CLR__ata_irq3__BITNR 11 -#define R_IRQ_MASK0_CLR__ata_irq3__WIDTH 1 -#define R_IRQ_MASK0_CLR__ata_irq3__clr 1 -#define R_IRQ_MASK0_CLR__ata_irq3__nop 0 -#define R_IRQ_MASK0_CLR__par0_peri__BITNR 10 -#define R_IRQ_MASK0_CLR__par0_peri__WIDTH 1 -#define R_IRQ_MASK0_CLR__par0_peri__clr 1 -#define R_IRQ_MASK0_CLR__par0_peri__nop 0 -#define R_IRQ_MASK0_CLR__ata_irq2__BITNR 10 -#define R_IRQ_MASK0_CLR__ata_irq2__WIDTH 1 -#define R_IRQ_MASK0_CLR__ata_irq2__clr 1 -#define R_IRQ_MASK0_CLR__ata_irq2__nop 0 -#define R_IRQ_MASK0_CLR__par0_data__BITNR 9 -#define R_IRQ_MASK0_CLR__par0_data__WIDTH 1 -#define R_IRQ_MASK0_CLR__par0_data__clr 1 -#define R_IRQ_MASK0_CLR__par0_data__nop 0 -#define R_IRQ_MASK0_CLR__ata_irq1__BITNR 9 -#define R_IRQ_MASK0_CLR__ata_irq1__WIDTH 1 -#define R_IRQ_MASK0_CLR__ata_irq1__clr 1 -#define R_IRQ_MASK0_CLR__ata_irq1__nop 0 -#define R_IRQ_MASK0_CLR__par0_ready__BITNR 8 -#define R_IRQ_MASK0_CLR__par0_ready__WIDTH 1 -#define R_IRQ_MASK0_CLR__par0_ready__clr 1 -#define R_IRQ_MASK0_CLR__par0_ready__nop 0 -#define R_IRQ_MASK0_CLR__ata_irq0__BITNR 8 -#define R_IRQ_MASK0_CLR__ata_irq0__WIDTH 1 -#define R_IRQ_MASK0_CLR__ata_irq0__clr 1 -#define R_IRQ_MASK0_CLR__ata_irq0__nop 0 -#define R_IRQ_MASK0_CLR__mio__BITNR 8 -#define R_IRQ_MASK0_CLR__mio__WIDTH 1 -#define R_IRQ_MASK0_CLR__mio__clr 1 -#define R_IRQ_MASK0_CLR__mio__nop 0 -#define R_IRQ_MASK0_CLR__scsi0__BITNR 8 -#define R_IRQ_MASK0_CLR__scsi0__WIDTH 1 -#define R_IRQ_MASK0_CLR__scsi0__clr 1 -#define R_IRQ_MASK0_CLR__scsi0__nop 0 -#define R_IRQ_MASK0_CLR__ata_dmaend__BITNR 7 -#define R_IRQ_MASK0_CLR__ata_dmaend__WIDTH 1 -#define R_IRQ_MASK0_CLR__ata_dmaend__clr 1 -#define R_IRQ_MASK0_CLR__ata_dmaend__nop 0 -#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__BITNR 5 -#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__WIDTH 1 -#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__clr 1 -#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__nop 0 -#define R_IRQ_MASK0_CLR__irq_int_vector_nr__BITNR 4 -#define R_IRQ_MASK0_CLR__irq_int_vector_nr__WIDTH 1 -#define R_IRQ_MASK0_CLR__irq_int_vector_nr__clr 1 -#define R_IRQ_MASK0_CLR__irq_int_vector_nr__nop 0 -#define R_IRQ_MASK0_CLR__ext_dma1__BITNR 3 -#define R_IRQ_MASK0_CLR__ext_dma1__WIDTH 1 -#define R_IRQ_MASK0_CLR__ext_dma1__clr 1 -#define R_IRQ_MASK0_CLR__ext_dma1__nop 0 -#define R_IRQ_MASK0_CLR__ext_dma0__BITNR 2 -#define R_IRQ_MASK0_CLR__ext_dma0__WIDTH 1 -#define R_IRQ_MASK0_CLR__ext_dma0__clr 1 -#define R_IRQ_MASK0_CLR__ext_dma0__nop 0 -#define R_IRQ_MASK0_CLR__timer1__BITNR 1 -#define R_IRQ_MASK0_CLR__timer1__WIDTH 1 -#define R_IRQ_MASK0_CLR__timer1__clr 1 -#define R_IRQ_MASK0_CLR__timer1__nop 0 -#define R_IRQ_MASK0_CLR__timer0__BITNR 0 -#define R_IRQ_MASK0_CLR__timer0__WIDTH 1 -#define R_IRQ_MASK0_CLR__timer0__clr 1 -#define R_IRQ_MASK0_CLR__timer0__nop 0 - -#define R_IRQ_READ0 (IO_TYPECAST_RO_UDWORD 0xb00000c4) -#define R_IRQ_READ0__nmi_pin__BITNR 31 -#define R_IRQ_READ0__nmi_pin__WIDTH 1 -#define R_IRQ_READ0__nmi_pin__active 1 -#define R_IRQ_READ0__nmi_pin__inactive 0 -#define R_IRQ_READ0__watchdog_nmi__BITNR 30 -#define R_IRQ_READ0__watchdog_nmi__WIDTH 1 -#define R_IRQ_READ0__watchdog_nmi__active 1 -#define R_IRQ_READ0__watchdog_nmi__inactive 0 -#define R_IRQ_READ0__sqe_test_error__BITNR 29 -#define R_IRQ_READ0__sqe_test_error__WIDTH 1 -#define R_IRQ_READ0__sqe_test_error__active 1 -#define R_IRQ_READ0__sqe_test_error__inactive 0 -#define R_IRQ_READ0__carrier_loss__BITNR 28 -#define R_IRQ_READ0__carrier_loss__WIDTH 1 -#define R_IRQ_READ0__carrier_loss__active 1 -#define R_IRQ_READ0__carrier_loss__inactive 0 -#define R_IRQ_READ0__deferred__BITNR 27 -#define R_IRQ_READ0__deferred__WIDTH 1 -#define R_IRQ_READ0__deferred__active 1 -#define R_IRQ_READ0__deferred__inactive 0 -#define R_IRQ_READ0__late_col__BITNR 26 -#define R_IRQ_READ0__late_col__WIDTH 1 -#define R_IRQ_READ0__late_col__active 1 -#define R_IRQ_READ0__late_col__inactive 0 -#define R_IRQ_READ0__multiple_col__BITNR 25 -#define R_IRQ_READ0__multiple_col__WIDTH 1 -#define R_IRQ_READ0__multiple_col__active 1 -#define R_IRQ_READ0__multiple_col__inactive 0 -#define R_IRQ_READ0__single_col__BITNR 24 -#define R_IRQ_READ0__single_col__WIDTH 1 -#define R_IRQ_READ0__single_col__active 1 -#define R_IRQ_READ0__single_col__inactive 0 -#define R_IRQ_READ0__congestion__BITNR 23 -#define R_IRQ_READ0__congestion__WIDTH 1 -#define R_IRQ_READ0__congestion__active 1 -#define R_IRQ_READ0__congestion__inactive 0 -#define R_IRQ_READ0__oversize__BITNR 22 -#define R_IRQ_READ0__oversize__WIDTH 1 -#define R_IRQ_READ0__oversize__active 1 -#define R_IRQ_READ0__oversize__inactive 0 -#define R_IRQ_READ0__alignment_error__BITNR 21 -#define R_IRQ_READ0__alignment_error__WIDTH 1 -#define R_IRQ_READ0__alignment_error__active 1 -#define R_IRQ_READ0__alignment_error__inactive 0 -#define R_IRQ_READ0__crc_error__BITNR 20 -#define R_IRQ_READ0__crc_error__WIDTH 1 -#define R_IRQ_READ0__crc_error__active 1 -#define R_IRQ_READ0__crc_error__inactive 0 -#define R_IRQ_READ0__overrun__BITNR 19 -#define R_IRQ_READ0__overrun__WIDTH 1 -#define R_IRQ_READ0__overrun__active 1 -#define R_IRQ_READ0__overrun__inactive 0 -#define R_IRQ_READ0__underrun__BITNR 18 -#define R_IRQ_READ0__underrun__WIDTH 1 -#define R_IRQ_READ0__underrun__active 1 -#define R_IRQ_READ0__underrun__inactive 0 -#define R_IRQ_READ0__excessive_col__BITNR 17 -#define R_IRQ_READ0__excessive_col__WIDTH 1 -#define R_IRQ_READ0__excessive_col__active 1 -#define R_IRQ_READ0__excessive_col__inactive 0 -#define R_IRQ_READ0__mdio__BITNR 16 -#define R_IRQ_READ0__mdio__WIDTH 1 -#define R_IRQ_READ0__mdio__active 1 -#define R_IRQ_READ0__mdio__inactive 0 -#define R_IRQ_READ0__ata_drq3__BITNR 15 -#define R_IRQ_READ0__ata_drq3__WIDTH 1 -#define R_IRQ_READ0__ata_drq3__active 1 -#define R_IRQ_READ0__ata_drq3__inactive 0 -#define R_IRQ_READ0__ata_drq2__BITNR 14 -#define R_IRQ_READ0__ata_drq2__WIDTH 1 -#define R_IRQ_READ0__ata_drq2__active 1 -#define R_IRQ_READ0__ata_drq2__inactive 0 -#define R_IRQ_READ0__ata_drq1__BITNR 13 -#define R_IRQ_READ0__ata_drq1__WIDTH 1 -#define R_IRQ_READ0__ata_drq1__active 1 -#define R_IRQ_READ0__ata_drq1__inactive 0 -#define R_IRQ_READ0__ata_drq0__BITNR 12 -#define R_IRQ_READ0__ata_drq0__WIDTH 1 -#define R_IRQ_READ0__ata_drq0__active 1 -#define R_IRQ_READ0__ata_drq0__inactive 0 -#define R_IRQ_READ0__par0_ecp_cmd__BITNR 11 -#define R_IRQ_READ0__par0_ecp_cmd__WIDTH 1 -#define R_IRQ_READ0__par0_ecp_cmd__active 1 -#define R_IRQ_READ0__par0_ecp_cmd__inactive 0 -#define R_IRQ_READ0__ata_irq3__BITNR 11 -#define R_IRQ_READ0__ata_irq3__WIDTH 1 -#define R_IRQ_READ0__ata_irq3__active 1 -#define R_IRQ_READ0__ata_irq3__inactive 0 -#define R_IRQ_READ0__par0_peri__BITNR 10 -#define R_IRQ_READ0__par0_peri__WIDTH 1 -#define R_IRQ_READ0__par0_peri__active 1 -#define R_IRQ_READ0__par0_peri__inactive 0 -#define R_IRQ_READ0__ata_irq2__BITNR 10 -#define R_IRQ_READ0__ata_irq2__WIDTH 1 -#define R_IRQ_READ0__ata_irq2__active 1 -#define R_IRQ_READ0__ata_irq2__inactive 0 -#define R_IRQ_READ0__par0_data__BITNR 9 -#define R_IRQ_READ0__par0_data__WIDTH 1 -#define R_IRQ_READ0__par0_data__active 1 -#define R_IRQ_READ0__par0_data__inactive 0 -#define R_IRQ_READ0__ata_irq1__BITNR 9 -#define R_IRQ_READ0__ata_irq1__WIDTH 1 -#define R_IRQ_READ0__ata_irq1__active 1 -#define R_IRQ_READ0__ata_irq1__inactive 0 -#define R_IRQ_READ0__par0_ready__BITNR 8 -#define R_IRQ_READ0__par0_ready__WIDTH 1 -#define R_IRQ_READ0__par0_ready__active 1 -#define R_IRQ_READ0__par0_ready__inactive 0 -#define R_IRQ_READ0__ata_irq0__BITNR 8 -#define R_IRQ_READ0__ata_irq0__WIDTH 1 -#define R_IRQ_READ0__ata_irq0__active 1 -#define R_IRQ_READ0__ata_irq0__inactive 0 -#define R_IRQ_READ0__mio__BITNR 8 -#define R_IRQ_READ0__mio__WIDTH 1 -#define R_IRQ_READ0__mio__active 1 -#define R_IRQ_READ0__mio__inactive 0 -#define R_IRQ_READ0__scsi0__BITNR 8 -#define R_IRQ_READ0__scsi0__WIDTH 1 -#define R_IRQ_READ0__scsi0__active 1 -#define R_IRQ_READ0__scsi0__inactive 0 -#define R_IRQ_READ0__ata_dmaend__BITNR 7 -#define R_IRQ_READ0__ata_dmaend__WIDTH 1 -#define R_IRQ_READ0__ata_dmaend__active 1 -#define R_IRQ_READ0__ata_dmaend__inactive 0 -#define R_IRQ_READ0__irq_ext_vector_nr__BITNR 5 -#define R_IRQ_READ0__irq_ext_vector_nr__WIDTH 1 -#define R_IRQ_READ0__irq_ext_vector_nr__active 1 -#define R_IRQ_READ0__irq_ext_vector_nr__inactive 0 -#define R_IRQ_READ0__irq_int_vector_nr__BITNR 4 -#define R_IRQ_READ0__irq_int_vector_nr__WIDTH 1 -#define R_IRQ_READ0__irq_int_vector_nr__active 1 -#define R_IRQ_READ0__irq_int_vector_nr__inactive 0 -#define R_IRQ_READ0__ext_dma1__BITNR 3 -#define R_IRQ_READ0__ext_dma1__WIDTH 1 -#define R_IRQ_READ0__ext_dma1__active 1 -#define R_IRQ_READ0__ext_dma1__inactive 0 -#define R_IRQ_READ0__ext_dma0__BITNR 2 -#define R_IRQ_READ0__ext_dma0__WIDTH 1 -#define R_IRQ_READ0__ext_dma0__active 1 -#define R_IRQ_READ0__ext_dma0__inactive 0 -#define R_IRQ_READ0__timer1__BITNR 1 -#define R_IRQ_READ0__timer1__WIDTH 1 -#define R_IRQ_READ0__timer1__active 1 -#define R_IRQ_READ0__timer1__inactive 0 -#define R_IRQ_READ0__timer0__BITNR 0 -#define R_IRQ_READ0__timer0__WIDTH 1 -#define R_IRQ_READ0__timer0__active 1 -#define R_IRQ_READ0__timer0__inactive 0 - -#define R_IRQ_MASK0_SET (IO_TYPECAST_UDWORD 0xb00000c4) -#define R_IRQ_MASK0_SET__nmi_pin__BITNR 31 -#define R_IRQ_MASK0_SET__nmi_pin__WIDTH 1 -#define R_IRQ_MASK0_SET__nmi_pin__set 1 -#define R_IRQ_MASK0_SET__nmi_pin__nop 0 -#define R_IRQ_MASK0_SET__watchdog_nmi__BITNR 30 -#define R_IRQ_MASK0_SET__watchdog_nmi__WIDTH 1 -#define R_IRQ_MASK0_SET__watchdog_nmi__set 1 -#define R_IRQ_MASK0_SET__watchdog_nmi__nop 0 -#define R_IRQ_MASK0_SET__sqe_test_error__BITNR 29 -#define R_IRQ_MASK0_SET__sqe_test_error__WIDTH 1 -#define R_IRQ_MASK0_SET__sqe_test_error__set 1 -#define R_IRQ_MASK0_SET__sqe_test_error__nop 0 -#define R_IRQ_MASK0_SET__carrier_loss__BITNR 28 -#define R_IRQ_MASK0_SET__carrier_loss__WIDTH 1 -#define R_IRQ_MASK0_SET__carrier_loss__set 1 -#define R_IRQ_MASK0_SET__carrier_loss__nop 0 -#define R_IRQ_MASK0_SET__deferred__BITNR 27 -#define R_IRQ_MASK0_SET__deferred__WIDTH 1 -#define R_IRQ_MASK0_SET__deferred__set 1 -#define R_IRQ_MASK0_SET__deferred__nop 0 -#define R_IRQ_MASK0_SET__late_col__BITNR 26 -#define R_IRQ_MASK0_SET__late_col__WIDTH 1 -#define R_IRQ_MASK0_SET__late_col__set 1 -#define R_IRQ_MASK0_SET__late_col__nop 0 -#define R_IRQ_MASK0_SET__multiple_col__BITNR 25 -#define R_IRQ_MASK0_SET__multiple_col__WIDTH 1 -#define R_IRQ_MASK0_SET__multiple_col__set 1 -#define R_IRQ_MASK0_SET__multiple_col__nop 0 -#define R_IRQ_MASK0_SET__single_col__BITNR 24 -#define R_IRQ_MASK0_SET__single_col__WIDTH 1 -#define R_IRQ_MASK0_SET__single_col__set 1 -#define R_IRQ_MASK0_SET__single_col__nop 0 -#define R_IRQ_MASK0_SET__congestion__BITNR 23 -#define R_IRQ_MASK0_SET__congestion__WIDTH 1 -#define R_IRQ_MASK0_SET__congestion__set 1 -#define R_IRQ_MASK0_SET__congestion__nop 0 -#define R_IRQ_MASK0_SET__oversize__BITNR 22 -#define R_IRQ_MASK0_SET__oversize__WIDTH 1 -#define R_IRQ_MASK0_SET__oversize__set 1 -#define R_IRQ_MASK0_SET__oversize__nop 0 -#define R_IRQ_MASK0_SET__alignment_error__BITNR 21 -#define R_IRQ_MASK0_SET__alignment_error__WIDTH 1 -#define R_IRQ_MASK0_SET__alignment_error__set 1 -#define R_IRQ_MASK0_SET__alignment_error__nop 0 -#define R_IRQ_MASK0_SET__crc_error__BITNR 20 -#define R_IRQ_MASK0_SET__crc_error__WIDTH 1 -#define R_IRQ_MASK0_SET__crc_error__set 1 -#define R_IRQ_MASK0_SET__crc_error__nop 0 -#define R_IRQ_MASK0_SET__overrun__BITNR 19 -#define R_IRQ_MASK0_SET__overrun__WIDTH 1 -#define R_IRQ_MASK0_SET__overrun__set 1 -#define R_IRQ_MASK0_SET__overrun__nop 0 -#define R_IRQ_MASK0_SET__underrun__BITNR 18 -#define R_IRQ_MASK0_SET__underrun__WIDTH 1 -#define R_IRQ_MASK0_SET__underrun__set 1 -#define R_IRQ_MASK0_SET__underrun__nop 0 -#define R_IRQ_MASK0_SET__excessive_col__BITNR 17 -#define R_IRQ_MASK0_SET__excessive_col__WIDTH 1 -#define R_IRQ_MASK0_SET__excessive_col__set 1 -#define R_IRQ_MASK0_SET__excessive_col__nop 0 -#define R_IRQ_MASK0_SET__mdio__BITNR 16 -#define R_IRQ_MASK0_SET__mdio__WIDTH 1 -#define R_IRQ_MASK0_SET__mdio__set 1 -#define R_IRQ_MASK0_SET__mdio__nop 0 -#define R_IRQ_MASK0_SET__ata_drq3__BITNR 15 -#define R_IRQ_MASK0_SET__ata_drq3__WIDTH 1 -#define R_IRQ_MASK0_SET__ata_drq3__set 1 -#define R_IRQ_MASK0_SET__ata_drq3__nop 0 -#define R_IRQ_MASK0_SET__ata_drq2__BITNR 14 -#define R_IRQ_MASK0_SET__ata_drq2__WIDTH 1 -#define R_IRQ_MASK0_SET__ata_drq2__set 1 -#define R_IRQ_MASK0_SET__ata_drq2__nop 0 -#define R_IRQ_MASK0_SET__ata_drq1__BITNR 13 -#define R_IRQ_MASK0_SET__ata_drq1__WIDTH 1 -#define R_IRQ_MASK0_SET__ata_drq1__set 1 -#define R_IRQ_MASK0_SET__ata_drq1__nop 0 -#define R_IRQ_MASK0_SET__ata_drq0__BITNR 12 -#define R_IRQ_MASK0_SET__ata_drq0__WIDTH 1 -#define R_IRQ_MASK0_SET__ata_drq0__set 1 -#define R_IRQ_MASK0_SET__ata_drq0__nop 0 -#define R_IRQ_MASK0_SET__par0_ecp_cmd__BITNR 11 -#define R_IRQ_MASK0_SET__par0_ecp_cmd__WIDTH 1 -#define R_IRQ_MASK0_SET__par0_ecp_cmd__set 1 -#define R_IRQ_MASK0_SET__par0_ecp_cmd__nop 0 -#define R_IRQ_MASK0_SET__ata_irq3__BITNR 11 -#define R_IRQ_MASK0_SET__ata_irq3__WIDTH 1 -#define R_IRQ_MASK0_SET__ata_irq3__set 1 -#define R_IRQ_MASK0_SET__ata_irq3__nop 0 -#define R_IRQ_MASK0_SET__par0_peri__BITNR 10 -#define R_IRQ_MASK0_SET__par0_peri__WIDTH 1 -#define R_IRQ_MASK0_SET__par0_peri__set 1 -#define R_IRQ_MASK0_SET__par0_peri__nop 0 -#define R_IRQ_MASK0_SET__ata_irq2__BITNR 10 -#define R_IRQ_MASK0_SET__ata_irq2__WIDTH 1 -#define R_IRQ_MASK0_SET__ata_irq2__set 1 -#define R_IRQ_MASK0_SET__ata_irq2__nop 0 -#define R_IRQ_MASK0_SET__par0_data__BITNR 9 -#define R_IRQ_MASK0_SET__par0_data__WIDTH 1 -#define R_IRQ_MASK0_SET__par0_data__set 1 -#define R_IRQ_MASK0_SET__par0_data__nop 0 -#define R_IRQ_MASK0_SET__ata_irq1__BITNR 9 -#define R_IRQ_MASK0_SET__ata_irq1__WIDTH 1 -#define R_IRQ_MASK0_SET__ata_irq1__set 1 -#define R_IRQ_MASK0_SET__ata_irq1__nop 0 -#define R_IRQ_MASK0_SET__par0_ready__BITNR 8 -#define R_IRQ_MASK0_SET__par0_ready__WIDTH 1 -#define R_IRQ_MASK0_SET__par0_ready__set 1 -#define R_IRQ_MASK0_SET__par0_ready__nop 0 -#define R_IRQ_MASK0_SET__ata_irq0__BITNR 8 -#define R_IRQ_MASK0_SET__ata_irq0__WIDTH 1 -#define R_IRQ_MASK0_SET__ata_irq0__set 1 -#define R_IRQ_MASK0_SET__ata_irq0__nop 0 -#define R_IRQ_MASK0_SET__mio__BITNR 8 -#define R_IRQ_MASK0_SET__mio__WIDTH 1 -#define R_IRQ_MASK0_SET__mio__set 1 -#define R_IRQ_MASK0_SET__mio__nop 0 -#define R_IRQ_MASK0_SET__scsi0__BITNR 8 -#define R_IRQ_MASK0_SET__scsi0__WIDTH 1 -#define R_IRQ_MASK0_SET__scsi0__set 1 -#define R_IRQ_MASK0_SET__scsi0__nop 0 -#define R_IRQ_MASK0_SET__ata_dmaend__BITNR 7 -#define R_IRQ_MASK0_SET__ata_dmaend__WIDTH 1 -#define R_IRQ_MASK0_SET__ata_dmaend__set 1 -#define R_IRQ_MASK0_SET__ata_dmaend__nop 0 -#define R_IRQ_MASK0_SET__irq_ext_vector_nr__BITNR 5 -#define R_IRQ_MASK0_SET__irq_ext_vector_nr__WIDTH 1 -#define R_IRQ_MASK0_SET__irq_ext_vector_nr__set 1 -#define R_IRQ_MASK0_SET__irq_ext_vector_nr__nop 0 -#define R_IRQ_MASK0_SET__irq_int_vector_nr__BITNR 4 -#define R_IRQ_MASK0_SET__irq_int_vector_nr__WIDTH 1 -#define R_IRQ_MASK0_SET__irq_int_vector_nr__set 1 -#define R_IRQ_MASK0_SET__irq_int_vector_nr__nop 0 -#define R_IRQ_MASK0_SET__ext_dma1__BITNR 3 -#define R_IRQ_MASK0_SET__ext_dma1__WIDTH 1 -#define R_IRQ_MASK0_SET__ext_dma1__set 1 -#define R_IRQ_MASK0_SET__ext_dma1__nop 0 -#define R_IRQ_MASK0_SET__ext_dma0__BITNR 2 -#define R_IRQ_MASK0_SET__ext_dma0__WIDTH 1 -#define R_IRQ_MASK0_SET__ext_dma0__set 1 -#define R_IRQ_MASK0_SET__ext_dma0__nop 0 -#define R_IRQ_MASK0_SET__timer1__BITNR 1 -#define R_IRQ_MASK0_SET__timer1__WIDTH 1 -#define R_IRQ_MASK0_SET__timer1__set 1 -#define R_IRQ_MASK0_SET__timer1__nop 0 -#define R_IRQ_MASK0_SET__timer0__BITNR 0 -#define R_IRQ_MASK0_SET__timer0__WIDTH 1 -#define R_IRQ_MASK0_SET__timer0__set 1 -#define R_IRQ_MASK0_SET__timer0__nop 0 - -#define R_IRQ_MASK1_RD (IO_TYPECAST_RO_UDWORD 0xb00000c8) -#define R_IRQ_MASK1_RD__sw_int7__BITNR 31 -#define R_IRQ_MASK1_RD__sw_int7__WIDTH 1 -#define R_IRQ_MASK1_RD__sw_int7__active 1 -#define R_IRQ_MASK1_RD__sw_int7__inactive 0 -#define R_IRQ_MASK1_RD__sw_int6__BITNR 30 -#define R_IRQ_MASK1_RD__sw_int6__WIDTH 1 -#define R_IRQ_MASK1_RD__sw_int6__active 1 -#define R_IRQ_MASK1_RD__sw_int6__inactive 0 -#define R_IRQ_MASK1_RD__sw_int5__BITNR 29 -#define R_IRQ_MASK1_RD__sw_int5__WIDTH 1 -#define R_IRQ_MASK1_RD__sw_int5__active 1 -#define R_IRQ_MASK1_RD__sw_int5__inactive 0 -#define R_IRQ_MASK1_RD__sw_int4__BITNR 28 -#define R_IRQ_MASK1_RD__sw_int4__WIDTH 1 -#define R_IRQ_MASK1_RD__sw_int4__active 1 -#define R_IRQ_MASK1_RD__sw_int4__inactive 0 -#define R_IRQ_MASK1_RD__sw_int3__BITNR 27 -#define R_IRQ_MASK1_RD__sw_int3__WIDTH 1 -#define R_IRQ_MASK1_RD__sw_int3__active 1 -#define R_IRQ_MASK1_RD__sw_int3__inactive 0 -#define R_IRQ_MASK1_RD__sw_int2__BITNR 26 -#define R_IRQ_MASK1_RD__sw_int2__WIDTH 1 -#define R_IRQ_MASK1_RD__sw_int2__active 1 -#define R_IRQ_MASK1_RD__sw_int2__inactive 0 -#define R_IRQ_MASK1_RD__sw_int1__BITNR 25 -#define R_IRQ_MASK1_RD__sw_int1__WIDTH 1 -#define R_IRQ_MASK1_RD__sw_int1__active 1 -#define R_IRQ_MASK1_RD__sw_int1__inactive 0 -#define R_IRQ_MASK1_RD__sw_int0__BITNR 24 -#define R_IRQ_MASK1_RD__sw_int0__WIDTH 1 -#define R_IRQ_MASK1_RD__sw_int0__active 1 -#define R_IRQ_MASK1_RD__sw_int0__inactive 0 -#define R_IRQ_MASK1_RD__par1_ecp_cmd__BITNR 19 -#define R_IRQ_MASK1_RD__par1_ecp_cmd__WIDTH 1 -#define R_IRQ_MASK1_RD__par1_ecp_cmd__active 1 -#define R_IRQ_MASK1_RD__par1_ecp_cmd__inactive 0 -#define R_IRQ_MASK1_RD__par1_peri__BITNR 18 -#define R_IRQ_MASK1_RD__par1_peri__WIDTH 1 -#define R_IRQ_MASK1_RD__par1_peri__active 1 -#define R_IRQ_MASK1_RD__par1_peri__inactive 0 -#define R_IRQ_MASK1_RD__par1_data__BITNR 17 -#define R_IRQ_MASK1_RD__par1_data__WIDTH 1 -#define R_IRQ_MASK1_RD__par1_data__active 1 -#define R_IRQ_MASK1_RD__par1_data__inactive 0 -#define R_IRQ_MASK1_RD__par1_ready__BITNR 16 -#define R_IRQ_MASK1_RD__par1_ready__WIDTH 1 -#define R_IRQ_MASK1_RD__par1_ready__active 1 -#define R_IRQ_MASK1_RD__par1_ready__inactive 0 -#define R_IRQ_MASK1_RD__scsi1__BITNR 16 -#define R_IRQ_MASK1_RD__scsi1__WIDTH 1 -#define R_IRQ_MASK1_RD__scsi1__active 1 -#define R_IRQ_MASK1_RD__scsi1__inactive 0 -#define R_IRQ_MASK1_RD__ser3_ready__BITNR 15 -#define R_IRQ_MASK1_RD__ser3_ready__WIDTH 1 -#define R_IRQ_MASK1_RD__ser3_ready__active 1 -#define R_IRQ_MASK1_RD__ser3_ready__inactive 0 -#define R_IRQ_MASK1_RD__ser3_data__BITNR 14 -#define R_IRQ_MASK1_RD__ser3_data__WIDTH 1 -#define R_IRQ_MASK1_RD__ser3_data__active 1 -#define R_IRQ_MASK1_RD__ser3_data__inactive 0 -#define R_IRQ_MASK1_RD__ser2_ready__BITNR 13 -#define R_IRQ_MASK1_RD__ser2_ready__WIDTH 1 -#define R_IRQ_MASK1_RD__ser2_ready__active 1 -#define R_IRQ_MASK1_RD__ser2_ready__inactive 0 -#define R_IRQ_MASK1_RD__ser2_data__BITNR 12 -#define R_IRQ_MASK1_RD__ser2_data__WIDTH 1 -#define R_IRQ_MASK1_RD__ser2_data__active 1 -#define R_IRQ_MASK1_RD__ser2_data__inactive 0 -#define R_IRQ_MASK1_RD__ser1_ready__BITNR 11 -#define R_IRQ_MASK1_RD__ser1_ready__WIDTH 1 -#define R_IRQ_MASK1_RD__ser1_ready__active 1 -#define R_IRQ_MASK1_RD__ser1_ready__inactive 0 -#define R_IRQ_MASK1_RD__ser1_data__BITNR 10 -#define R_IRQ_MASK1_RD__ser1_data__WIDTH 1 -#define R_IRQ_MASK1_RD__ser1_data__active 1 -#define R_IRQ_MASK1_RD__ser1_data__inactive 0 -#define R_IRQ_MASK1_RD__ser0_ready__BITNR 9 -#define R_IRQ_MASK1_RD__ser0_ready__WIDTH 1 -#define R_IRQ_MASK1_RD__ser0_ready__active 1 -#define R_IRQ_MASK1_RD__ser0_ready__inactive 0 -#define R_IRQ_MASK1_RD__ser0_data__BITNR 8 -#define R_IRQ_MASK1_RD__ser0_data__WIDTH 1 -#define R_IRQ_MASK1_RD__ser0_data__active 1 -#define R_IRQ_MASK1_RD__ser0_data__inactive 0 -#define R_IRQ_MASK1_RD__pa7__BITNR 7 -#define R_IRQ_MASK1_RD__pa7__WIDTH 1 -#define R_IRQ_MASK1_RD__pa7__active 1 -#define R_IRQ_MASK1_RD__pa7__inactive 0 -#define R_IRQ_MASK1_RD__pa6__BITNR 6 -#define R_IRQ_MASK1_RD__pa6__WIDTH 1 -#define R_IRQ_MASK1_RD__pa6__active 1 -#define R_IRQ_MASK1_RD__pa6__inactive 0 -#define R_IRQ_MASK1_RD__pa5__BITNR 5 -#define R_IRQ_MASK1_RD__pa5__WIDTH 1 -#define R_IRQ_MASK1_RD__pa5__active 1 -#define R_IRQ_MASK1_RD__pa5__inactive 0 -#define R_IRQ_MASK1_RD__pa4__BITNR 4 -#define R_IRQ_MASK1_RD__pa4__WIDTH 1 -#define R_IRQ_MASK1_RD__pa4__active 1 -#define R_IRQ_MASK1_RD__pa4__inactive 0 -#define R_IRQ_MASK1_RD__pa3__BITNR 3 -#define R_IRQ_MASK1_RD__pa3__WIDTH 1 -#define R_IRQ_MASK1_RD__pa3__active 1 -#define R_IRQ_MASK1_RD__pa3__inactive 0 -#define R_IRQ_MASK1_RD__pa2__BITNR 2 -#define R_IRQ_MASK1_RD__pa2__WIDTH 1 -#define R_IRQ_MASK1_RD__pa2__active 1 -#define R_IRQ_MASK1_RD__pa2__inactive 0 -#define R_IRQ_MASK1_RD__pa1__BITNR 1 -#define R_IRQ_MASK1_RD__pa1__WIDTH 1 -#define R_IRQ_MASK1_RD__pa1__active 1 -#define R_IRQ_MASK1_RD__pa1__inactive 0 -#define R_IRQ_MASK1_RD__pa0__BITNR 0 -#define R_IRQ_MASK1_RD__pa0__WIDTH 1 -#define R_IRQ_MASK1_RD__pa0__active 1 -#define R_IRQ_MASK1_RD__pa0__inactive 0 - -#define R_IRQ_MASK1_CLR (IO_TYPECAST_UDWORD 0xb00000c8) -#define R_IRQ_MASK1_CLR__sw_int7__BITNR 31 -#define R_IRQ_MASK1_CLR__sw_int7__WIDTH 1 -#define R_IRQ_MASK1_CLR__sw_int7__clr 1 -#define R_IRQ_MASK1_CLR__sw_int7__nop 0 -#define R_IRQ_MASK1_CLR__sw_int6__BITNR 30 -#define R_IRQ_MASK1_CLR__sw_int6__WIDTH 1 -#define R_IRQ_MASK1_CLR__sw_int6__clr 1 -#define R_IRQ_MASK1_CLR__sw_int6__nop 0 -#define R_IRQ_MASK1_CLR__sw_int5__BITNR 29 -#define R_IRQ_MASK1_CLR__sw_int5__WIDTH 1 -#define R_IRQ_MASK1_CLR__sw_int5__clr 1 -#define R_IRQ_MASK1_CLR__sw_int5__nop 0 -#define R_IRQ_MASK1_CLR__sw_int4__BITNR 28 -#define R_IRQ_MASK1_CLR__sw_int4__WIDTH 1 -#define R_IRQ_MASK1_CLR__sw_int4__clr 1 -#define R_IRQ_MASK1_CLR__sw_int4__nop 0 -#define R_IRQ_MASK1_CLR__sw_int3__BITNR 27 -#define R_IRQ_MASK1_CLR__sw_int3__WIDTH 1 -#define R_IRQ_MASK1_CLR__sw_int3__clr 1 -#define R_IRQ_MASK1_CLR__sw_int3__nop 0 -#define R_IRQ_MASK1_CLR__sw_int2__BITNR 26 -#define R_IRQ_MASK1_CLR__sw_int2__WIDTH 1 -#define R_IRQ_MASK1_CLR__sw_int2__clr 1 -#define R_IRQ_MASK1_CLR__sw_int2__nop 0 -#define R_IRQ_MASK1_CLR__sw_int1__BITNR 25 -#define R_IRQ_MASK1_CLR__sw_int1__WIDTH 1 -#define R_IRQ_MASK1_CLR__sw_int1__clr 1 -#define R_IRQ_MASK1_CLR__sw_int1__nop 0 -#define R_IRQ_MASK1_CLR__sw_int0__BITNR 24 -#define R_IRQ_MASK1_CLR__sw_int0__WIDTH 1 -#define R_IRQ_MASK1_CLR__sw_int0__clr 1 -#define R_IRQ_MASK1_CLR__sw_int0__nop 0 -#define R_IRQ_MASK1_CLR__par1_ecp_cmd__BITNR 19 -#define R_IRQ_MASK1_CLR__par1_ecp_cmd__WIDTH 1 -#define R_IRQ_MASK1_CLR__par1_ecp_cmd__clr 1 -#define R_IRQ_MASK1_CLR__par1_ecp_cmd__nop 0 -#define R_IRQ_MASK1_CLR__par1_peri__BITNR 18 -#define R_IRQ_MASK1_CLR__par1_peri__WIDTH 1 -#define R_IRQ_MASK1_CLR__par1_peri__clr 1 -#define R_IRQ_MASK1_CLR__par1_peri__nop 0 -#define R_IRQ_MASK1_CLR__par1_data__BITNR 17 -#define R_IRQ_MASK1_CLR__par1_data__WIDTH 1 -#define R_IRQ_MASK1_CLR__par1_data__clr 1 -#define R_IRQ_MASK1_CLR__par1_data__nop 0 -#define R_IRQ_MASK1_CLR__par1_ready__BITNR 16 -#define R_IRQ_MASK1_CLR__par1_ready__WIDTH 1 -#define R_IRQ_MASK1_CLR__par1_ready__clr 1 -#define R_IRQ_MASK1_CLR__par1_ready__nop 0 -#define R_IRQ_MASK1_CLR__scsi1__BITNR 16 -#define R_IRQ_MASK1_CLR__scsi1__WIDTH 1 -#define R_IRQ_MASK1_CLR__scsi1__clr 1 -#define R_IRQ_MASK1_CLR__scsi1__nop 0 -#define R_IRQ_MASK1_CLR__ser3_ready__BITNR 15 -#define R_IRQ_MASK1_CLR__ser3_ready__WIDTH 1 -#define R_IRQ_MASK1_CLR__ser3_ready__clr 1 -#define R_IRQ_MASK1_CLR__ser3_ready__nop 0 -#define R_IRQ_MASK1_CLR__ser3_data__BITNR 14 -#define R_IRQ_MASK1_CLR__ser3_data__WIDTH 1 -#define R_IRQ_MASK1_CLR__ser3_data__clr 1 -#define R_IRQ_MASK1_CLR__ser3_data__nop 0 -#define R_IRQ_MASK1_CLR__ser2_ready__BITNR 13 -#define R_IRQ_MASK1_CLR__ser2_ready__WIDTH 1 -#define R_IRQ_MASK1_CLR__ser2_ready__clr 1 -#define R_IRQ_MASK1_CLR__ser2_ready__nop 0 -#define R_IRQ_MASK1_CLR__ser2_data__BITNR 12 -#define R_IRQ_MASK1_CLR__ser2_data__WIDTH 1 -#define R_IRQ_MASK1_CLR__ser2_data__clr 1 -#define R_IRQ_MASK1_CLR__ser2_data__nop 0 -#define R_IRQ_MASK1_CLR__ser1_ready__BITNR 11 -#define R_IRQ_MASK1_CLR__ser1_ready__WIDTH 1 -#define R_IRQ_MASK1_CLR__ser1_ready__clr 1 -#define R_IRQ_MASK1_CLR__ser1_ready__nop 0 -#define R_IRQ_MASK1_CLR__ser1_data__BITNR 10 -#define R_IRQ_MASK1_CLR__ser1_data__WIDTH 1 -#define R_IRQ_MASK1_CLR__ser1_data__clr 1 -#define R_IRQ_MASK1_CLR__ser1_data__nop 0 -#define R_IRQ_MASK1_CLR__ser0_ready__BITNR 9 -#define R_IRQ_MASK1_CLR__ser0_ready__WIDTH 1 -#define R_IRQ_MASK1_CLR__ser0_ready__clr 1 -#define R_IRQ_MASK1_CLR__ser0_ready__nop 0 -#define R_IRQ_MASK1_CLR__ser0_data__BITNR 8 -#define R_IRQ_MASK1_CLR__ser0_data__WIDTH 1 -#define R_IRQ_MASK1_CLR__ser0_data__clr 1 -#define R_IRQ_MASK1_CLR__ser0_data__nop 0 -#define R_IRQ_MASK1_CLR__pa7__BITNR 7 -#define R_IRQ_MASK1_CLR__pa7__WIDTH 1 -#define R_IRQ_MASK1_CLR__pa7__clr 1 -#define R_IRQ_MASK1_CLR__pa7__nop 0 -#define R_IRQ_MASK1_CLR__pa6__BITNR 6 -#define R_IRQ_MASK1_CLR__pa6__WIDTH 1 -#define R_IRQ_MASK1_CLR__pa6__clr 1 -#define R_IRQ_MASK1_CLR__pa6__nop 0 -#define R_IRQ_MASK1_CLR__pa5__BITNR 5 -#define R_IRQ_MASK1_CLR__pa5__WIDTH 1 -#define R_IRQ_MASK1_CLR__pa5__clr 1 -#define R_IRQ_MASK1_CLR__pa5__nop 0 -#define R_IRQ_MASK1_CLR__pa4__BITNR 4 -#define R_IRQ_MASK1_CLR__pa4__WIDTH 1 -#define R_IRQ_MASK1_CLR__pa4__clr 1 -#define R_IRQ_MASK1_CLR__pa4__nop 0 -#define R_IRQ_MASK1_CLR__pa3__BITNR 3 -#define R_IRQ_MASK1_CLR__pa3__WIDTH 1 -#define R_IRQ_MASK1_CLR__pa3__clr 1 -#define R_IRQ_MASK1_CLR__pa3__nop 0 -#define R_IRQ_MASK1_CLR__pa2__BITNR 2 -#define R_IRQ_MASK1_CLR__pa2__WIDTH 1 -#define R_IRQ_MASK1_CLR__pa2__clr 1 -#define R_IRQ_MASK1_CLR__pa2__nop 0 -#define R_IRQ_MASK1_CLR__pa1__BITNR 1 -#define R_IRQ_MASK1_CLR__pa1__WIDTH 1 -#define R_IRQ_MASK1_CLR__pa1__clr 1 -#define R_IRQ_MASK1_CLR__pa1__nop 0 -#define R_IRQ_MASK1_CLR__pa0__BITNR 0 -#define R_IRQ_MASK1_CLR__pa0__WIDTH 1 -#define R_IRQ_MASK1_CLR__pa0__clr 1 -#define R_IRQ_MASK1_CLR__pa0__nop 0 - -#define R_IRQ_READ1 (IO_TYPECAST_RO_UDWORD 0xb00000cc) -#define R_IRQ_READ1__sw_int7__BITNR 31 -#define R_IRQ_READ1__sw_int7__WIDTH 1 -#define R_IRQ_READ1__sw_int7__active 1 -#define R_IRQ_READ1__sw_int7__inactive 0 -#define R_IRQ_READ1__sw_int6__BITNR 30 -#define R_IRQ_READ1__sw_int6__WIDTH 1 -#define R_IRQ_READ1__sw_int6__active 1 -#define R_IRQ_READ1__sw_int6__inactive 0 -#define R_IRQ_READ1__sw_int5__BITNR 29 -#define R_IRQ_READ1__sw_int5__WIDTH 1 -#define R_IRQ_READ1__sw_int5__active 1 -#define R_IRQ_READ1__sw_int5__inactive 0 -#define R_IRQ_READ1__sw_int4__BITNR 28 -#define R_IRQ_READ1__sw_int4__WIDTH 1 -#define R_IRQ_READ1__sw_int4__active 1 -#define R_IRQ_READ1__sw_int4__inactive 0 -#define R_IRQ_READ1__sw_int3__BITNR 27 -#define R_IRQ_READ1__sw_int3__WIDTH 1 -#define R_IRQ_READ1__sw_int3__active 1 -#define R_IRQ_READ1__sw_int3__inactive 0 -#define R_IRQ_READ1__sw_int2__BITNR 26 -#define R_IRQ_READ1__sw_int2__WIDTH 1 -#define R_IRQ_READ1__sw_int2__active 1 -#define R_IRQ_READ1__sw_int2__inactive 0 -#define R_IRQ_READ1__sw_int1__BITNR 25 -#define R_IRQ_READ1__sw_int1__WIDTH 1 -#define R_IRQ_READ1__sw_int1__active 1 -#define R_IRQ_READ1__sw_int1__inactive 0 -#define R_IRQ_READ1__sw_int0__BITNR 24 -#define R_IRQ_READ1__sw_int0__WIDTH 1 -#define R_IRQ_READ1__sw_int0__active 1 -#define R_IRQ_READ1__sw_int0__inactive 0 -#define R_IRQ_READ1__par1_ecp_cmd__BITNR 19 -#define R_IRQ_READ1__par1_ecp_cmd__WIDTH 1 -#define R_IRQ_READ1__par1_ecp_cmd__active 1 -#define R_IRQ_READ1__par1_ecp_cmd__inactive 0 -#define R_IRQ_READ1__par1_peri__BITNR 18 -#define R_IRQ_READ1__par1_peri__WIDTH 1 -#define R_IRQ_READ1__par1_peri__active 1 -#define R_IRQ_READ1__par1_peri__inactive 0 -#define R_IRQ_READ1__par1_data__BITNR 17 -#define R_IRQ_READ1__par1_data__WIDTH 1 -#define R_IRQ_READ1__par1_data__active 1 -#define R_IRQ_READ1__par1_data__inactive 0 -#define R_IRQ_READ1__par1_ready__BITNR 16 -#define R_IRQ_READ1__par1_ready__WIDTH 1 -#define R_IRQ_READ1__par1_ready__active 1 -#define R_IRQ_READ1__par1_ready__inactive 0 -#define R_IRQ_READ1__scsi1__BITNR 16 -#define R_IRQ_READ1__scsi1__WIDTH 1 -#define R_IRQ_READ1__scsi1__active 1 -#define R_IRQ_READ1__scsi1__inactive 0 -#define R_IRQ_READ1__ser3_ready__BITNR 15 -#define R_IRQ_READ1__ser3_ready__WIDTH 1 -#define R_IRQ_READ1__ser3_ready__active 1 -#define R_IRQ_READ1__ser3_ready__inactive 0 -#define R_IRQ_READ1__ser3_data__BITNR 14 -#define R_IRQ_READ1__ser3_data__WIDTH 1 -#define R_IRQ_READ1__ser3_data__active 1 -#define R_IRQ_READ1__ser3_data__inactive 0 -#define R_IRQ_READ1__ser2_ready__BITNR 13 -#define R_IRQ_READ1__ser2_ready__WIDTH 1 -#define R_IRQ_READ1__ser2_ready__active 1 -#define R_IRQ_READ1__ser2_ready__inactive 0 -#define R_IRQ_READ1__ser2_data__BITNR 12 -#define R_IRQ_READ1__ser2_data__WIDTH 1 -#define R_IRQ_READ1__ser2_data__active 1 -#define R_IRQ_READ1__ser2_data__inactive 0 -#define R_IRQ_READ1__ser1_ready__BITNR 11 -#define R_IRQ_READ1__ser1_ready__WIDTH 1 -#define R_IRQ_READ1__ser1_ready__active 1 -#define R_IRQ_READ1__ser1_ready__inactive 0 -#define R_IRQ_READ1__ser1_data__BITNR 10 -#define R_IRQ_READ1__ser1_data__WIDTH 1 -#define R_IRQ_READ1__ser1_data__active 1 -#define R_IRQ_READ1__ser1_data__inactive 0 -#define R_IRQ_READ1__ser0_ready__BITNR 9 -#define R_IRQ_READ1__ser0_ready__WIDTH 1 -#define R_IRQ_READ1__ser0_ready__active 1 -#define R_IRQ_READ1__ser0_ready__inactive 0 -#define R_IRQ_READ1__ser0_data__BITNR 8 -#define R_IRQ_READ1__ser0_data__WIDTH 1 -#define R_IRQ_READ1__ser0_data__active 1 -#define R_IRQ_READ1__ser0_data__inactive 0 -#define R_IRQ_READ1__pa7__BITNR 7 -#define R_IRQ_READ1__pa7__WIDTH 1 -#define R_IRQ_READ1__pa7__active 1 -#define R_IRQ_READ1__pa7__inactive 0 -#define R_IRQ_READ1__pa6__BITNR 6 -#define R_IRQ_READ1__pa6__WIDTH 1 -#define R_IRQ_READ1__pa6__active 1 -#define R_IRQ_READ1__pa6__inactive 0 -#define R_IRQ_READ1__pa5__BITNR 5 -#define R_IRQ_READ1__pa5__WIDTH 1 -#define R_IRQ_READ1__pa5__active 1 -#define R_IRQ_READ1__pa5__inactive 0 -#define R_IRQ_READ1__pa4__BITNR 4 -#define R_IRQ_READ1__pa4__WIDTH 1 -#define R_IRQ_READ1__pa4__active 1 -#define R_IRQ_READ1__pa4__inactive 0 -#define R_IRQ_READ1__pa3__BITNR 3 -#define R_IRQ_READ1__pa3__WIDTH 1 -#define R_IRQ_READ1__pa3__active 1 -#define R_IRQ_READ1__pa3__inactive 0 -#define R_IRQ_READ1__pa2__BITNR 2 -#define R_IRQ_READ1__pa2__WIDTH 1 -#define R_IRQ_READ1__pa2__active 1 -#define R_IRQ_READ1__pa2__inactive 0 -#define R_IRQ_READ1__pa1__BITNR 1 -#define R_IRQ_READ1__pa1__WIDTH 1 -#define R_IRQ_READ1__pa1__active 1 -#define R_IRQ_READ1__pa1__inactive 0 -#define R_IRQ_READ1__pa0__BITNR 0 -#define R_IRQ_READ1__pa0__WIDTH 1 -#define R_IRQ_READ1__pa0__active 1 -#define R_IRQ_READ1__pa0__inactive 0 - -#define R_IRQ_MASK1_SET (IO_TYPECAST_UDWORD 0xb00000cc) -#define R_IRQ_MASK1_SET__sw_int7__BITNR 31 -#define R_IRQ_MASK1_SET__sw_int7__WIDTH 1 -#define R_IRQ_MASK1_SET__sw_int7__set 1 -#define R_IRQ_MASK1_SET__sw_int7__nop 0 -#define R_IRQ_MASK1_SET__sw_int6__BITNR 30 -#define R_IRQ_MASK1_SET__sw_int6__WIDTH 1 -#define R_IRQ_MASK1_SET__sw_int6__set 1 -#define R_IRQ_MASK1_SET__sw_int6__nop 0 -#define R_IRQ_MASK1_SET__sw_int5__BITNR 29 -#define R_IRQ_MASK1_SET__sw_int5__WIDTH 1 -#define R_IRQ_MASK1_SET__sw_int5__set 1 -#define R_IRQ_MASK1_SET__sw_int5__nop 0 -#define R_IRQ_MASK1_SET__sw_int4__BITNR 28 -#define R_IRQ_MASK1_SET__sw_int4__WIDTH 1 -#define R_IRQ_MASK1_SET__sw_int4__set 1 -#define R_IRQ_MASK1_SET__sw_int4__nop 0 -#define R_IRQ_MASK1_SET__sw_int3__BITNR 27 -#define R_IRQ_MASK1_SET__sw_int3__WIDTH 1 -#define R_IRQ_MASK1_SET__sw_int3__set 1 -#define R_IRQ_MASK1_SET__sw_int3__nop 0 -#define R_IRQ_MASK1_SET__sw_int2__BITNR 26 -#define R_IRQ_MASK1_SET__sw_int2__WIDTH 1 -#define R_IRQ_MASK1_SET__sw_int2__set 1 -#define R_IRQ_MASK1_SET__sw_int2__nop 0 -#define R_IRQ_MASK1_SET__sw_int1__BITNR 25 -#define R_IRQ_MASK1_SET__sw_int1__WIDTH 1 -#define R_IRQ_MASK1_SET__sw_int1__set 1 -#define R_IRQ_MASK1_SET__sw_int1__nop 0 -#define R_IRQ_MASK1_SET__sw_int0__BITNR 24 -#define R_IRQ_MASK1_SET__sw_int0__WIDTH 1 -#define R_IRQ_MASK1_SET__sw_int0__set 1 -#define R_IRQ_MASK1_SET__sw_int0__nop 0 -#define R_IRQ_MASK1_SET__par1_ecp_cmd__BITNR 19 -#define R_IRQ_MASK1_SET__par1_ecp_cmd__WIDTH 1 -#define R_IRQ_MASK1_SET__par1_ecp_cmd__set 1 -#define R_IRQ_MASK1_SET__par1_ecp_cmd__nop 0 -#define R_IRQ_MASK1_SET__par1_peri__BITNR 18 -#define R_IRQ_MASK1_SET__par1_peri__WIDTH 1 -#define R_IRQ_MASK1_SET__par1_peri__set 1 -#define R_IRQ_MASK1_SET__par1_peri__nop 0 -#define R_IRQ_MASK1_SET__par1_data__BITNR 17 -#define R_IRQ_MASK1_SET__par1_data__WIDTH 1 -#define R_IRQ_MASK1_SET__par1_data__set 1 -#define R_IRQ_MASK1_SET__par1_data__nop 0 -#define R_IRQ_MASK1_SET__par1_ready__BITNR 16 -#define R_IRQ_MASK1_SET__par1_ready__WIDTH 1 -#define R_IRQ_MASK1_SET__par1_ready__set 1 -#define R_IRQ_MASK1_SET__par1_ready__nop 0 -#define R_IRQ_MASK1_SET__scsi1__BITNR 16 -#define R_IRQ_MASK1_SET__scsi1__WIDTH 1 -#define R_IRQ_MASK1_SET__scsi1__set 1 -#define R_IRQ_MASK1_SET__scsi1__nop 0 -#define R_IRQ_MASK1_SET__ser3_ready__BITNR 15 -#define R_IRQ_MASK1_SET__ser3_ready__WIDTH 1 -#define R_IRQ_MASK1_SET__ser3_ready__set 1 -#define R_IRQ_MASK1_SET__ser3_ready__nop 0 -#define R_IRQ_MASK1_SET__ser3_data__BITNR 14 -#define R_IRQ_MASK1_SET__ser3_data__WIDTH 1 -#define R_IRQ_MASK1_SET__ser3_data__set 1 -#define R_IRQ_MASK1_SET__ser3_data__nop 0 -#define R_IRQ_MASK1_SET__ser2_ready__BITNR 13 -#define R_IRQ_MASK1_SET__ser2_ready__WIDTH 1 -#define R_IRQ_MASK1_SET__ser2_ready__set 1 -#define R_IRQ_MASK1_SET__ser2_ready__nop 0 -#define R_IRQ_MASK1_SET__ser2_data__BITNR 12 -#define R_IRQ_MASK1_SET__ser2_data__WIDTH 1 -#define R_IRQ_MASK1_SET__ser2_data__set 1 -#define R_IRQ_MASK1_SET__ser2_data__nop 0 -#define R_IRQ_MASK1_SET__ser1_ready__BITNR 11 -#define R_IRQ_MASK1_SET__ser1_ready__WIDTH 1 -#define R_IRQ_MASK1_SET__ser1_ready__set 1 -#define R_IRQ_MASK1_SET__ser1_ready__nop 0 -#define R_IRQ_MASK1_SET__ser1_data__BITNR 10 -#define R_IRQ_MASK1_SET__ser1_data__WIDTH 1 -#define R_IRQ_MASK1_SET__ser1_data__set 1 -#define R_IRQ_MASK1_SET__ser1_data__nop 0 -#define R_IRQ_MASK1_SET__ser0_ready__BITNR 9 -#define R_IRQ_MASK1_SET__ser0_ready__WIDTH 1 -#define R_IRQ_MASK1_SET__ser0_ready__set 1 -#define R_IRQ_MASK1_SET__ser0_ready__nop 0 -#define R_IRQ_MASK1_SET__ser0_data__BITNR 8 -#define R_IRQ_MASK1_SET__ser0_data__WIDTH 1 -#define R_IRQ_MASK1_SET__ser0_data__set 1 -#define R_IRQ_MASK1_SET__ser0_data__nop 0 -#define R_IRQ_MASK1_SET__pa7__BITNR 7 -#define R_IRQ_MASK1_SET__pa7__WIDTH 1 -#define R_IRQ_MASK1_SET__pa7__set 1 -#define R_IRQ_MASK1_SET__pa7__nop 0 -#define R_IRQ_MASK1_SET__pa6__BITNR 6 -#define R_IRQ_MASK1_SET__pa6__WIDTH 1 -#define R_IRQ_MASK1_SET__pa6__set 1 -#define R_IRQ_MASK1_SET__pa6__nop 0 -#define R_IRQ_MASK1_SET__pa5__BITNR 5 -#define R_IRQ_MASK1_SET__pa5__WIDTH 1 -#define R_IRQ_MASK1_SET__pa5__set 1 -#define R_IRQ_MASK1_SET__pa5__nop 0 -#define R_IRQ_MASK1_SET__pa4__BITNR 4 -#define R_IRQ_MASK1_SET__pa4__WIDTH 1 -#define R_IRQ_MASK1_SET__pa4__set 1 -#define R_IRQ_MASK1_SET__pa4__nop 0 -#define R_IRQ_MASK1_SET__pa3__BITNR 3 -#define R_IRQ_MASK1_SET__pa3__WIDTH 1 -#define R_IRQ_MASK1_SET__pa3__set 1 -#define R_IRQ_MASK1_SET__pa3__nop 0 -#define R_IRQ_MASK1_SET__pa2__BITNR 2 -#define R_IRQ_MASK1_SET__pa2__WIDTH 1 -#define R_IRQ_MASK1_SET__pa2__set 1 -#define R_IRQ_MASK1_SET__pa2__nop 0 -#define R_IRQ_MASK1_SET__pa1__BITNR 1 -#define R_IRQ_MASK1_SET__pa1__WIDTH 1 -#define R_IRQ_MASK1_SET__pa1__set 1 -#define R_IRQ_MASK1_SET__pa1__nop 0 -#define R_IRQ_MASK1_SET__pa0__BITNR 0 -#define R_IRQ_MASK1_SET__pa0__WIDTH 1 -#define R_IRQ_MASK1_SET__pa0__set 1 -#define R_IRQ_MASK1_SET__pa0__nop 0 - -#define R_IRQ_MASK2_RD (IO_TYPECAST_RO_UDWORD 0xb00000d0) -#define R_IRQ_MASK2_RD__dma8_sub3_descr__BITNR 23 -#define R_IRQ_MASK2_RD__dma8_sub3_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma8_sub3_descr__active 1 -#define R_IRQ_MASK2_RD__dma8_sub3_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma8_sub2_descr__BITNR 22 -#define R_IRQ_MASK2_RD__dma8_sub2_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma8_sub2_descr__active 1 -#define R_IRQ_MASK2_RD__dma8_sub2_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma8_sub1_descr__BITNR 21 -#define R_IRQ_MASK2_RD__dma8_sub1_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma8_sub1_descr__active 1 -#define R_IRQ_MASK2_RD__dma8_sub1_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma8_sub0_descr__BITNR 20 -#define R_IRQ_MASK2_RD__dma8_sub0_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma8_sub0_descr__active 1 -#define R_IRQ_MASK2_RD__dma8_sub0_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma9_eop__BITNR 19 -#define R_IRQ_MASK2_RD__dma9_eop__WIDTH 1 -#define R_IRQ_MASK2_RD__dma9_eop__active 1 -#define R_IRQ_MASK2_RD__dma9_eop__inactive 0 -#define R_IRQ_MASK2_RD__dma9_descr__BITNR 18 -#define R_IRQ_MASK2_RD__dma9_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma9_descr__active 1 -#define R_IRQ_MASK2_RD__dma9_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma8_eop__BITNR 17 -#define R_IRQ_MASK2_RD__dma8_eop__WIDTH 1 -#define R_IRQ_MASK2_RD__dma8_eop__active 1 -#define R_IRQ_MASK2_RD__dma8_eop__inactive 0 -#define R_IRQ_MASK2_RD__dma8_descr__BITNR 16 -#define R_IRQ_MASK2_RD__dma8_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma8_descr__active 1 -#define R_IRQ_MASK2_RD__dma8_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma7_eop__BITNR 15 -#define R_IRQ_MASK2_RD__dma7_eop__WIDTH 1 -#define R_IRQ_MASK2_RD__dma7_eop__active 1 -#define R_IRQ_MASK2_RD__dma7_eop__inactive 0 -#define R_IRQ_MASK2_RD__dma7_descr__BITNR 14 -#define R_IRQ_MASK2_RD__dma7_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma7_descr__active 1 -#define R_IRQ_MASK2_RD__dma7_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma6_eop__BITNR 13 -#define R_IRQ_MASK2_RD__dma6_eop__WIDTH 1 -#define R_IRQ_MASK2_RD__dma6_eop__active 1 -#define R_IRQ_MASK2_RD__dma6_eop__inactive 0 -#define R_IRQ_MASK2_RD__dma6_descr__BITNR 12 -#define R_IRQ_MASK2_RD__dma6_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma6_descr__active 1 -#define R_IRQ_MASK2_RD__dma6_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma5_eop__BITNR 11 -#define R_IRQ_MASK2_RD__dma5_eop__WIDTH 1 -#define R_IRQ_MASK2_RD__dma5_eop__active 1 -#define R_IRQ_MASK2_RD__dma5_eop__inactive 0 -#define R_IRQ_MASK2_RD__dma5_descr__BITNR 10 -#define R_IRQ_MASK2_RD__dma5_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma5_descr__active 1 -#define R_IRQ_MASK2_RD__dma5_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma4_eop__BITNR 9 -#define R_IRQ_MASK2_RD__dma4_eop__WIDTH 1 -#define R_IRQ_MASK2_RD__dma4_eop__active 1 -#define R_IRQ_MASK2_RD__dma4_eop__inactive 0 -#define R_IRQ_MASK2_RD__dma4_descr__BITNR 8 -#define R_IRQ_MASK2_RD__dma4_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma4_descr__active 1 -#define R_IRQ_MASK2_RD__dma4_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma3_eop__BITNR 7 -#define R_IRQ_MASK2_RD__dma3_eop__WIDTH 1 -#define R_IRQ_MASK2_RD__dma3_eop__active 1 -#define R_IRQ_MASK2_RD__dma3_eop__inactive 0 -#define R_IRQ_MASK2_RD__dma3_descr__BITNR 6 -#define R_IRQ_MASK2_RD__dma3_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma3_descr__active 1 -#define R_IRQ_MASK2_RD__dma3_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma2_eop__BITNR 5 -#define R_IRQ_MASK2_RD__dma2_eop__WIDTH 1 -#define R_IRQ_MASK2_RD__dma2_eop__active 1 -#define R_IRQ_MASK2_RD__dma2_eop__inactive 0 -#define R_IRQ_MASK2_RD__dma2_descr__BITNR 4 -#define R_IRQ_MASK2_RD__dma2_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma2_descr__active 1 -#define R_IRQ_MASK2_RD__dma2_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma1_eop__BITNR 3 -#define R_IRQ_MASK2_RD__dma1_eop__WIDTH 1 -#define R_IRQ_MASK2_RD__dma1_eop__active 1 -#define R_IRQ_MASK2_RD__dma1_eop__inactive 0 -#define R_IRQ_MASK2_RD__dma1_descr__BITNR 2 -#define R_IRQ_MASK2_RD__dma1_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma1_descr__active 1 -#define R_IRQ_MASK2_RD__dma1_descr__inactive 0 -#define R_IRQ_MASK2_RD__dma0_eop__BITNR 1 -#define R_IRQ_MASK2_RD__dma0_eop__WIDTH 1 -#define R_IRQ_MASK2_RD__dma0_eop__active 1 -#define R_IRQ_MASK2_RD__dma0_eop__inactive 0 -#define R_IRQ_MASK2_RD__dma0_descr__BITNR 0 -#define R_IRQ_MASK2_RD__dma0_descr__WIDTH 1 -#define R_IRQ_MASK2_RD__dma0_descr__active 1 -#define R_IRQ_MASK2_RD__dma0_descr__inactive 0 - -#define R_IRQ_MASK2_CLR (IO_TYPECAST_UDWORD 0xb00000d0) -#define R_IRQ_MASK2_CLR__dma8_sub3_descr__BITNR 23 -#define R_IRQ_MASK2_CLR__dma8_sub3_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma8_sub3_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma8_sub3_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma8_sub2_descr__BITNR 22 -#define R_IRQ_MASK2_CLR__dma8_sub2_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma8_sub2_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma8_sub2_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma8_sub1_descr__BITNR 21 -#define R_IRQ_MASK2_CLR__dma8_sub1_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma8_sub1_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma8_sub1_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma8_sub0_descr__BITNR 20 -#define R_IRQ_MASK2_CLR__dma8_sub0_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma8_sub0_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma8_sub0_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma9_eop__BITNR 19 -#define R_IRQ_MASK2_CLR__dma9_eop__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma9_eop__clr 1 -#define R_IRQ_MASK2_CLR__dma9_eop__nop 0 -#define R_IRQ_MASK2_CLR__dma9_descr__BITNR 18 -#define R_IRQ_MASK2_CLR__dma9_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma9_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma9_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma8_eop__BITNR 17 -#define R_IRQ_MASK2_CLR__dma8_eop__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma8_eop__clr 1 -#define R_IRQ_MASK2_CLR__dma8_eop__nop 0 -#define R_IRQ_MASK2_CLR__dma8_descr__BITNR 16 -#define R_IRQ_MASK2_CLR__dma8_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma8_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma8_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma7_eop__BITNR 15 -#define R_IRQ_MASK2_CLR__dma7_eop__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma7_eop__clr 1 -#define R_IRQ_MASK2_CLR__dma7_eop__nop 0 -#define R_IRQ_MASK2_CLR__dma7_descr__BITNR 14 -#define R_IRQ_MASK2_CLR__dma7_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma7_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma7_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma6_eop__BITNR 13 -#define R_IRQ_MASK2_CLR__dma6_eop__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma6_eop__clr 1 -#define R_IRQ_MASK2_CLR__dma6_eop__nop 0 -#define R_IRQ_MASK2_CLR__dma6_descr__BITNR 12 -#define R_IRQ_MASK2_CLR__dma6_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma6_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma6_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma5_eop__BITNR 11 -#define R_IRQ_MASK2_CLR__dma5_eop__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma5_eop__clr 1 -#define R_IRQ_MASK2_CLR__dma5_eop__nop 0 -#define R_IRQ_MASK2_CLR__dma5_descr__BITNR 10 -#define R_IRQ_MASK2_CLR__dma5_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma5_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma5_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma4_eop__BITNR 9 -#define R_IRQ_MASK2_CLR__dma4_eop__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma4_eop__clr 1 -#define R_IRQ_MASK2_CLR__dma4_eop__nop 0 -#define R_IRQ_MASK2_CLR__dma4_descr__BITNR 8 -#define R_IRQ_MASK2_CLR__dma4_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma4_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma4_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma3_eop__BITNR 7 -#define R_IRQ_MASK2_CLR__dma3_eop__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma3_eop__clr 1 -#define R_IRQ_MASK2_CLR__dma3_eop__nop 0 -#define R_IRQ_MASK2_CLR__dma3_descr__BITNR 6 -#define R_IRQ_MASK2_CLR__dma3_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma3_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma3_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma2_eop__BITNR 5 -#define R_IRQ_MASK2_CLR__dma2_eop__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma2_eop__clr 1 -#define R_IRQ_MASK2_CLR__dma2_eop__nop 0 -#define R_IRQ_MASK2_CLR__dma2_descr__BITNR 4 -#define R_IRQ_MASK2_CLR__dma2_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma2_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma2_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma1_eop__BITNR 3 -#define R_IRQ_MASK2_CLR__dma1_eop__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma1_eop__clr 1 -#define R_IRQ_MASK2_CLR__dma1_eop__nop 0 -#define R_IRQ_MASK2_CLR__dma1_descr__BITNR 2 -#define R_IRQ_MASK2_CLR__dma1_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma1_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma1_descr__nop 0 -#define R_IRQ_MASK2_CLR__dma0_eop__BITNR 1 -#define R_IRQ_MASK2_CLR__dma0_eop__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma0_eop__clr 1 -#define R_IRQ_MASK2_CLR__dma0_eop__nop 0 -#define R_IRQ_MASK2_CLR__dma0_descr__BITNR 0 -#define R_IRQ_MASK2_CLR__dma0_descr__WIDTH 1 -#define R_IRQ_MASK2_CLR__dma0_descr__clr 1 -#define R_IRQ_MASK2_CLR__dma0_descr__nop 0 - -#define R_IRQ_READ2 (IO_TYPECAST_RO_UDWORD 0xb00000d4) -#define R_IRQ_READ2__dma8_sub3_descr__BITNR 23 -#define R_IRQ_READ2__dma8_sub3_descr__WIDTH 1 -#define R_IRQ_READ2__dma8_sub3_descr__active 1 -#define R_IRQ_READ2__dma8_sub3_descr__inactive 0 -#define R_IRQ_READ2__dma8_sub2_descr__BITNR 22 -#define R_IRQ_READ2__dma8_sub2_descr__WIDTH 1 -#define R_IRQ_READ2__dma8_sub2_descr__active 1 -#define R_IRQ_READ2__dma8_sub2_descr__inactive 0 -#define R_IRQ_READ2__dma8_sub1_descr__BITNR 21 -#define R_IRQ_READ2__dma8_sub1_descr__WIDTH 1 -#define R_IRQ_READ2__dma8_sub1_descr__active 1 -#define R_IRQ_READ2__dma8_sub1_descr__inactive 0 -#define R_IRQ_READ2__dma8_sub0_descr__BITNR 20 -#define R_IRQ_READ2__dma8_sub0_descr__WIDTH 1 -#define R_IRQ_READ2__dma8_sub0_descr__active 1 -#define R_IRQ_READ2__dma8_sub0_descr__inactive 0 -#define R_IRQ_READ2__dma9_eop__BITNR 19 -#define R_IRQ_READ2__dma9_eop__WIDTH 1 -#define R_IRQ_READ2__dma9_eop__active 1 -#define R_IRQ_READ2__dma9_eop__inactive 0 -#define R_IRQ_READ2__dma9_descr__BITNR 18 -#define R_IRQ_READ2__dma9_descr__WIDTH 1 -#define R_IRQ_READ2__dma9_descr__active 1 -#define R_IRQ_READ2__dma9_descr__inactive 0 -#define R_IRQ_READ2__dma8_eop__BITNR 17 -#define R_IRQ_READ2__dma8_eop__WIDTH 1 -#define R_IRQ_READ2__dma8_eop__active 1 -#define R_IRQ_READ2__dma8_eop__inactive 0 -#define R_IRQ_READ2__dma8_descr__BITNR 16 -#define R_IRQ_READ2__dma8_descr__WIDTH 1 -#define R_IRQ_READ2__dma8_descr__active 1 -#define R_IRQ_READ2__dma8_descr__inactive 0 -#define R_IRQ_READ2__dma7_eop__BITNR 15 -#define R_IRQ_READ2__dma7_eop__WIDTH 1 -#define R_IRQ_READ2__dma7_eop__active 1 -#define R_IRQ_READ2__dma7_eop__inactive 0 -#define R_IRQ_READ2__dma7_descr__BITNR 14 -#define R_IRQ_READ2__dma7_descr__WIDTH 1 -#define R_IRQ_READ2__dma7_descr__active 1 -#define R_IRQ_READ2__dma7_descr__inactive 0 -#define R_IRQ_READ2__dma6_eop__BITNR 13 -#define R_IRQ_READ2__dma6_eop__WIDTH 1 -#define R_IRQ_READ2__dma6_eop__active 1 -#define R_IRQ_READ2__dma6_eop__inactive 0 -#define R_IRQ_READ2__dma6_descr__BITNR 12 -#define R_IRQ_READ2__dma6_descr__WIDTH 1 -#define R_IRQ_READ2__dma6_descr__active 1 -#define R_IRQ_READ2__dma6_descr__inactive 0 -#define R_IRQ_READ2__dma5_eop__BITNR 11 -#define R_IRQ_READ2__dma5_eop__WIDTH 1 -#define R_IRQ_READ2__dma5_eop__active 1 -#define R_IRQ_READ2__dma5_eop__inactive 0 -#define R_IRQ_READ2__dma5_descr__BITNR 10 -#define R_IRQ_READ2__dma5_descr__WIDTH 1 -#define R_IRQ_READ2__dma5_descr__active 1 -#define R_IRQ_READ2__dma5_descr__inactive 0 -#define R_IRQ_READ2__dma4_eop__BITNR 9 -#define R_IRQ_READ2__dma4_eop__WIDTH 1 -#define R_IRQ_READ2__dma4_eop__active 1 -#define R_IRQ_READ2__dma4_eop__inactive 0 -#define R_IRQ_READ2__dma4_descr__BITNR 8 -#define R_IRQ_READ2__dma4_descr__WIDTH 1 -#define R_IRQ_READ2__dma4_descr__active 1 -#define R_IRQ_READ2__dma4_descr__inactive 0 -#define R_IRQ_READ2__dma3_eop__BITNR 7 -#define R_IRQ_READ2__dma3_eop__WIDTH 1 -#define R_IRQ_READ2__dma3_eop__active 1 -#define R_IRQ_READ2__dma3_eop__inactive 0 -#define R_IRQ_READ2__dma3_descr__BITNR 6 -#define R_IRQ_READ2__dma3_descr__WIDTH 1 -#define R_IRQ_READ2__dma3_descr__active 1 -#define R_IRQ_READ2__dma3_descr__inactive 0 -#define R_IRQ_READ2__dma2_eop__BITNR 5 -#define R_IRQ_READ2__dma2_eop__WIDTH 1 -#define R_IRQ_READ2__dma2_eop__active 1 -#define R_IRQ_READ2__dma2_eop__inactive 0 -#define R_IRQ_READ2__dma2_descr__BITNR 4 -#define R_IRQ_READ2__dma2_descr__WIDTH 1 -#define R_IRQ_READ2__dma2_descr__active 1 -#define R_IRQ_READ2__dma2_descr__inactive 0 -#define R_IRQ_READ2__dma1_eop__BITNR 3 -#define R_IRQ_READ2__dma1_eop__WIDTH 1 -#define R_IRQ_READ2__dma1_eop__active 1 -#define R_IRQ_READ2__dma1_eop__inactive 0 -#define R_IRQ_READ2__dma1_descr__BITNR 2 -#define R_IRQ_READ2__dma1_descr__WIDTH 1 -#define R_IRQ_READ2__dma1_descr__active 1 -#define R_IRQ_READ2__dma1_descr__inactive 0 -#define R_IRQ_READ2__dma0_eop__BITNR 1 -#define R_IRQ_READ2__dma0_eop__WIDTH 1 -#define R_IRQ_READ2__dma0_eop__active 1 -#define R_IRQ_READ2__dma0_eop__inactive 0 -#define R_IRQ_READ2__dma0_descr__BITNR 0 -#define R_IRQ_READ2__dma0_descr__WIDTH 1 -#define R_IRQ_READ2__dma0_descr__active 1 -#define R_IRQ_READ2__dma0_descr__inactive 0 - -#define R_IRQ_MASK2_SET (IO_TYPECAST_UDWORD 0xb00000d4) -#define R_IRQ_MASK2_SET__dma8_sub3_descr__BITNR 23 -#define R_IRQ_MASK2_SET__dma8_sub3_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma8_sub3_descr__set 1 -#define R_IRQ_MASK2_SET__dma8_sub3_descr__nop 0 -#define R_IRQ_MASK2_SET__dma8_sub2_descr__BITNR 22 -#define R_IRQ_MASK2_SET__dma8_sub2_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma8_sub2_descr__set 1 -#define R_IRQ_MASK2_SET__dma8_sub2_descr__nop 0 -#define R_IRQ_MASK2_SET__dma8_sub1_descr__BITNR 21 -#define R_IRQ_MASK2_SET__dma8_sub1_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma8_sub1_descr__set 1 -#define R_IRQ_MASK2_SET__dma8_sub1_descr__nop 0 -#define R_IRQ_MASK2_SET__dma8_sub0_descr__BITNR 20 -#define R_IRQ_MASK2_SET__dma8_sub0_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma8_sub0_descr__set 1 -#define R_IRQ_MASK2_SET__dma8_sub0_descr__nop 0 -#define R_IRQ_MASK2_SET__dma9_eop__BITNR 19 -#define R_IRQ_MASK2_SET__dma9_eop__WIDTH 1 -#define R_IRQ_MASK2_SET__dma9_eop__set 1 -#define R_IRQ_MASK2_SET__dma9_eop__nop 0 -#define R_IRQ_MASK2_SET__dma9_descr__BITNR 18 -#define R_IRQ_MASK2_SET__dma9_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma9_descr__set 1 -#define R_IRQ_MASK2_SET__dma9_descr__nop 0 -#define R_IRQ_MASK2_SET__dma8_eop__BITNR 17 -#define R_IRQ_MASK2_SET__dma8_eop__WIDTH 1 -#define R_IRQ_MASK2_SET__dma8_eop__set 1 -#define R_IRQ_MASK2_SET__dma8_eop__nop 0 -#define R_IRQ_MASK2_SET__dma8_descr__BITNR 16 -#define R_IRQ_MASK2_SET__dma8_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma8_descr__set 1 -#define R_IRQ_MASK2_SET__dma8_descr__nop 0 -#define R_IRQ_MASK2_SET__dma7_eop__BITNR 15 -#define R_IRQ_MASK2_SET__dma7_eop__WIDTH 1 -#define R_IRQ_MASK2_SET__dma7_eop__set 1 -#define R_IRQ_MASK2_SET__dma7_eop__nop 0 -#define R_IRQ_MASK2_SET__dma7_descr__BITNR 14 -#define R_IRQ_MASK2_SET__dma7_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma7_descr__set 1 -#define R_IRQ_MASK2_SET__dma7_descr__nop 0 -#define R_IRQ_MASK2_SET__dma6_eop__BITNR 13 -#define R_IRQ_MASK2_SET__dma6_eop__WIDTH 1 -#define R_IRQ_MASK2_SET__dma6_eop__set 1 -#define R_IRQ_MASK2_SET__dma6_eop__nop 0 -#define R_IRQ_MASK2_SET__dma6_descr__BITNR 12 -#define R_IRQ_MASK2_SET__dma6_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma6_descr__set 1 -#define R_IRQ_MASK2_SET__dma6_descr__nop 0 -#define R_IRQ_MASK2_SET__dma5_eop__BITNR 11 -#define R_IRQ_MASK2_SET__dma5_eop__WIDTH 1 -#define R_IRQ_MASK2_SET__dma5_eop__set 1 -#define R_IRQ_MASK2_SET__dma5_eop__nop 0 -#define R_IRQ_MASK2_SET__dma5_descr__BITNR 10 -#define R_IRQ_MASK2_SET__dma5_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma5_descr__set 1 -#define R_IRQ_MASK2_SET__dma5_descr__nop 0 -#define R_IRQ_MASK2_SET__dma4_eop__BITNR 9 -#define R_IRQ_MASK2_SET__dma4_eop__WIDTH 1 -#define R_IRQ_MASK2_SET__dma4_eop__set 1 -#define R_IRQ_MASK2_SET__dma4_eop__nop 0 -#define R_IRQ_MASK2_SET__dma4_descr__BITNR 8 -#define R_IRQ_MASK2_SET__dma4_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma4_descr__set 1 -#define R_IRQ_MASK2_SET__dma4_descr__nop 0 -#define R_IRQ_MASK2_SET__dma3_eop__BITNR 7 -#define R_IRQ_MASK2_SET__dma3_eop__WIDTH 1 -#define R_IRQ_MASK2_SET__dma3_eop__set 1 -#define R_IRQ_MASK2_SET__dma3_eop__nop 0 -#define R_IRQ_MASK2_SET__dma3_descr__BITNR 6 -#define R_IRQ_MASK2_SET__dma3_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma3_descr__set 1 -#define R_IRQ_MASK2_SET__dma3_descr__nop 0 -#define R_IRQ_MASK2_SET__dma2_eop__BITNR 5 -#define R_IRQ_MASK2_SET__dma2_eop__WIDTH 1 -#define R_IRQ_MASK2_SET__dma2_eop__set 1 -#define R_IRQ_MASK2_SET__dma2_eop__nop 0 -#define R_IRQ_MASK2_SET__dma2_descr__BITNR 4 -#define R_IRQ_MASK2_SET__dma2_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma2_descr__set 1 -#define R_IRQ_MASK2_SET__dma2_descr__nop 0 -#define R_IRQ_MASK2_SET__dma1_eop__BITNR 3 -#define R_IRQ_MASK2_SET__dma1_eop__WIDTH 1 -#define R_IRQ_MASK2_SET__dma1_eop__set 1 -#define R_IRQ_MASK2_SET__dma1_eop__nop 0 -#define R_IRQ_MASK2_SET__dma1_descr__BITNR 2 -#define R_IRQ_MASK2_SET__dma1_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma1_descr__set 1 -#define R_IRQ_MASK2_SET__dma1_descr__nop 0 -#define R_IRQ_MASK2_SET__dma0_eop__BITNR 1 -#define R_IRQ_MASK2_SET__dma0_eop__WIDTH 1 -#define R_IRQ_MASK2_SET__dma0_eop__set 1 -#define R_IRQ_MASK2_SET__dma0_eop__nop 0 -#define R_IRQ_MASK2_SET__dma0_descr__BITNR 0 -#define R_IRQ_MASK2_SET__dma0_descr__WIDTH 1 -#define R_IRQ_MASK2_SET__dma0_descr__set 1 -#define R_IRQ_MASK2_SET__dma0_descr__nop 0 - -#define R_VECT_MASK_RD (IO_TYPECAST_RO_UDWORD 0xb00000d8) -#define R_VECT_MASK_RD__usb__BITNR 31 -#define R_VECT_MASK_RD__usb__WIDTH 1 -#define R_VECT_MASK_RD__usb__active 1 -#define R_VECT_MASK_RD__usb__inactive 0 -#define R_VECT_MASK_RD__dma9__BITNR 25 -#define R_VECT_MASK_RD__dma9__WIDTH 1 -#define R_VECT_MASK_RD__dma9__active 1 -#define R_VECT_MASK_RD__dma9__inactive 0 -#define R_VECT_MASK_RD__dma8__BITNR 24 -#define R_VECT_MASK_RD__dma8__WIDTH 1 -#define R_VECT_MASK_RD__dma8__active 1 -#define R_VECT_MASK_RD__dma8__inactive 0 -#define R_VECT_MASK_RD__dma7__BITNR 23 -#define R_VECT_MASK_RD__dma7__WIDTH 1 -#define R_VECT_MASK_RD__dma7__active 1 -#define R_VECT_MASK_RD__dma7__inactive 0 -#define R_VECT_MASK_RD__dma6__BITNR 22 -#define R_VECT_MASK_RD__dma6__WIDTH 1 -#define R_VECT_MASK_RD__dma6__active 1 -#define R_VECT_MASK_RD__dma6__inactive 0 -#define R_VECT_MASK_RD__dma5__BITNR 21 -#define R_VECT_MASK_RD__dma5__WIDTH 1 -#define R_VECT_MASK_RD__dma5__active 1 -#define R_VECT_MASK_RD__dma5__inactive 0 -#define R_VECT_MASK_RD__dma4__BITNR 20 -#define R_VECT_MASK_RD__dma4__WIDTH 1 -#define R_VECT_MASK_RD__dma4__active 1 -#define R_VECT_MASK_RD__dma4__inactive 0 -#define R_VECT_MASK_RD__dma3__BITNR 19 -#define R_VECT_MASK_RD__dma3__WIDTH 1 -#define R_VECT_MASK_RD__dma3__active 1 -#define R_VECT_MASK_RD__dma3__inactive 0 -#define R_VECT_MASK_RD__dma2__BITNR 18 -#define R_VECT_MASK_RD__dma2__WIDTH 1 -#define R_VECT_MASK_RD__dma2__active 1 -#define R_VECT_MASK_RD__dma2__inactive 0 -#define R_VECT_MASK_RD__dma1__BITNR 17 -#define R_VECT_MASK_RD__dma1__WIDTH 1 -#define R_VECT_MASK_RD__dma1__active 1 -#define R_VECT_MASK_RD__dma1__inactive 0 -#define R_VECT_MASK_RD__dma0__BITNR 16 -#define R_VECT_MASK_RD__dma0__WIDTH 1 -#define R_VECT_MASK_RD__dma0__active 1 -#define R_VECT_MASK_RD__dma0__inactive 0 -#define R_VECT_MASK_RD__ext_dma1__BITNR 13 -#define R_VECT_MASK_RD__ext_dma1__WIDTH 1 -#define R_VECT_MASK_RD__ext_dma1__active 1 -#define R_VECT_MASK_RD__ext_dma1__inactive 0 -#define R_VECT_MASK_RD__ext_dma0__BITNR 12 -#define R_VECT_MASK_RD__ext_dma0__WIDTH 1 -#define R_VECT_MASK_RD__ext_dma0__active 1 -#define R_VECT_MASK_RD__ext_dma0__inactive 0 -#define R_VECT_MASK_RD__pa__BITNR 11 -#define R_VECT_MASK_RD__pa__WIDTH 1 -#define R_VECT_MASK_RD__pa__active 1 -#define R_VECT_MASK_RD__pa__inactive 0 -#define R_VECT_MASK_RD__irq_intnr__BITNR 10 -#define R_VECT_MASK_RD__irq_intnr__WIDTH 1 -#define R_VECT_MASK_RD__irq_intnr__active 1 -#define R_VECT_MASK_RD__irq_intnr__inactive 0 -#define R_VECT_MASK_RD__sw__BITNR 9 -#define R_VECT_MASK_RD__sw__WIDTH 1 -#define R_VECT_MASK_RD__sw__active 1 -#define R_VECT_MASK_RD__sw__inactive 0 -#define R_VECT_MASK_RD__serial__BITNR 8 -#define R_VECT_MASK_RD__serial__WIDTH 1 -#define R_VECT_MASK_RD__serial__active 1 -#define R_VECT_MASK_RD__serial__inactive 0 -#define R_VECT_MASK_RD__snmp__BITNR 7 -#define R_VECT_MASK_RD__snmp__WIDTH 1 -#define R_VECT_MASK_RD__snmp__active 1 -#define R_VECT_MASK_RD__snmp__inactive 0 -#define R_VECT_MASK_RD__network__BITNR 6 -#define R_VECT_MASK_RD__network__WIDTH 1 -#define R_VECT_MASK_RD__network__active 1 -#define R_VECT_MASK_RD__network__inactive 0 -#define R_VECT_MASK_RD__scsi1__BITNR 5 -#define R_VECT_MASK_RD__scsi1__WIDTH 1 -#define R_VECT_MASK_RD__scsi1__active 1 -#define R_VECT_MASK_RD__scsi1__inactive 0 -#define R_VECT_MASK_RD__par1__BITNR 5 -#define R_VECT_MASK_RD__par1__WIDTH 1 -#define R_VECT_MASK_RD__par1__active 1 -#define R_VECT_MASK_RD__par1__inactive 0 -#define R_VECT_MASK_RD__scsi0__BITNR 4 -#define R_VECT_MASK_RD__scsi0__WIDTH 1 -#define R_VECT_MASK_RD__scsi0__active 1 -#define R_VECT_MASK_RD__scsi0__inactive 0 -#define R_VECT_MASK_RD__par0__BITNR 4 -#define R_VECT_MASK_RD__par0__WIDTH 1 -#define R_VECT_MASK_RD__par0__active 1 -#define R_VECT_MASK_RD__par0__inactive 0 -#define R_VECT_MASK_RD__ata__BITNR 4 -#define R_VECT_MASK_RD__ata__WIDTH 1 -#define R_VECT_MASK_RD__ata__active 1 -#define R_VECT_MASK_RD__ata__inactive 0 -#define R_VECT_MASK_RD__mio__BITNR 4 -#define R_VECT_MASK_RD__mio__WIDTH 1 -#define R_VECT_MASK_RD__mio__active 1 -#define R_VECT_MASK_RD__mio__inactive 0 -#define R_VECT_MASK_RD__timer1__BITNR 3 -#define R_VECT_MASK_RD__timer1__WIDTH 1 -#define R_VECT_MASK_RD__timer1__active 1 -#define R_VECT_MASK_RD__timer1__inactive 0 -#define R_VECT_MASK_RD__timer0__BITNR 2 -#define R_VECT_MASK_RD__timer0__WIDTH 1 -#define R_VECT_MASK_RD__timer0__active 1 -#define R_VECT_MASK_RD__timer0__inactive 0 -#define R_VECT_MASK_RD__nmi__BITNR 1 -#define R_VECT_MASK_RD__nmi__WIDTH 1 -#define R_VECT_MASK_RD__nmi__active 1 -#define R_VECT_MASK_RD__nmi__inactive 0 -#define R_VECT_MASK_RD__some__BITNR 0 -#define R_VECT_MASK_RD__some__WIDTH 1 -#define R_VECT_MASK_RD__some__active 1 -#define R_VECT_MASK_RD__some__inactive 0 - -#define R_VECT_MASK_CLR (IO_TYPECAST_UDWORD 0xb00000d8) -#define R_VECT_MASK_CLR__usb__BITNR 31 -#define R_VECT_MASK_CLR__usb__WIDTH 1 -#define R_VECT_MASK_CLR__usb__clr 1 -#define R_VECT_MASK_CLR__usb__nop 0 -#define R_VECT_MASK_CLR__dma9__BITNR 25 -#define R_VECT_MASK_CLR__dma9__WIDTH 1 -#define R_VECT_MASK_CLR__dma9__clr 1 -#define R_VECT_MASK_CLR__dma9__nop 0 -#define R_VECT_MASK_CLR__dma8__BITNR 24 -#define R_VECT_MASK_CLR__dma8__WIDTH 1 -#define R_VECT_MASK_CLR__dma8__clr 1 -#define R_VECT_MASK_CLR__dma8__nop 0 -#define R_VECT_MASK_CLR__dma7__BITNR 23 -#define R_VECT_MASK_CLR__dma7__WIDTH 1 -#define R_VECT_MASK_CLR__dma7__clr 1 -#define R_VECT_MASK_CLR__dma7__nop 0 -#define R_VECT_MASK_CLR__dma6__BITNR 22 -#define R_VECT_MASK_CLR__dma6__WIDTH 1 -#define R_VECT_MASK_CLR__dma6__clr 1 -#define R_VECT_MASK_CLR__dma6__nop 0 -#define R_VECT_MASK_CLR__dma5__BITNR 21 -#define R_VECT_MASK_CLR__dma5__WIDTH 1 -#define R_VECT_MASK_CLR__dma5__clr 1 -#define R_VECT_MASK_CLR__dma5__nop 0 -#define R_VECT_MASK_CLR__dma4__BITNR 20 -#define R_VECT_MASK_CLR__dma4__WIDTH 1 -#define R_VECT_MASK_CLR__dma4__clr 1 -#define R_VECT_MASK_CLR__dma4__nop 0 -#define R_VECT_MASK_CLR__dma3__BITNR 19 -#define R_VECT_MASK_CLR__dma3__WIDTH 1 -#define R_VECT_MASK_CLR__dma3__clr 1 -#define R_VECT_MASK_CLR__dma3__nop 0 -#define R_VECT_MASK_CLR__dma2__BITNR 18 -#define R_VECT_MASK_CLR__dma2__WIDTH 1 -#define R_VECT_MASK_CLR__dma2__clr 1 -#define R_VECT_MASK_CLR__dma2__nop 0 -#define R_VECT_MASK_CLR__dma1__BITNR 17 -#define R_VECT_MASK_CLR__dma1__WIDTH 1 -#define R_VECT_MASK_CLR__dma1__clr 1 -#define R_VECT_MASK_CLR__dma1__nop 0 -#define R_VECT_MASK_CLR__dma0__BITNR 16 -#define R_VECT_MASK_CLR__dma0__WIDTH 1 -#define R_VECT_MASK_CLR__dma0__clr 1 -#define R_VECT_MASK_CLR__dma0__nop 0 -#define R_VECT_MASK_CLR__ext_dma1__BITNR 13 -#define R_VECT_MASK_CLR__ext_dma1__WIDTH 1 -#define R_VECT_MASK_CLR__ext_dma1__clr 1 -#define R_VECT_MASK_CLR__ext_dma1__nop 0 -#define R_VECT_MASK_CLR__ext_dma0__BITNR 12 -#define R_VECT_MASK_CLR__ext_dma0__WIDTH 1 -#define R_VECT_MASK_CLR__ext_dma0__clr 1 -#define R_VECT_MASK_CLR__ext_dma0__nop 0 -#define R_VECT_MASK_CLR__pa__BITNR 11 -#define R_VECT_MASK_CLR__pa__WIDTH 1 -#define R_VECT_MASK_CLR__pa__clr 1 -#define R_VECT_MASK_CLR__pa__nop 0 -#define R_VECT_MASK_CLR__irq_intnr__BITNR 10 -#define R_VECT_MASK_CLR__irq_intnr__WIDTH 1 -#define R_VECT_MASK_CLR__irq_intnr__clr 1 -#define R_VECT_MASK_CLR__irq_intnr__nop 0 -#define R_VECT_MASK_CLR__sw__BITNR 9 -#define R_VECT_MASK_CLR__sw__WIDTH 1 -#define R_VECT_MASK_CLR__sw__clr 1 -#define R_VECT_MASK_CLR__sw__nop 0 -#define R_VECT_MASK_CLR__serial__BITNR 8 -#define R_VECT_MASK_CLR__serial__WIDTH 1 -#define R_VECT_MASK_CLR__serial__clr 1 -#define R_VECT_MASK_CLR__serial__nop 0 -#define R_VECT_MASK_CLR__snmp__BITNR 7 -#define R_VECT_MASK_CLR__snmp__WIDTH 1 -#define R_VECT_MASK_CLR__snmp__clr 1 -#define R_VECT_MASK_CLR__snmp__nop 0 -#define R_VECT_MASK_CLR__network__BITNR 6 -#define R_VECT_MASK_CLR__network__WIDTH 1 -#define R_VECT_MASK_CLR__network__clr 1 -#define R_VECT_MASK_CLR__network__nop 0 -#define R_VECT_MASK_CLR__scsi1__BITNR 5 -#define R_VECT_MASK_CLR__scsi1__WIDTH 1 -#define R_VECT_MASK_CLR__scsi1__clr 1 -#define R_VECT_MASK_CLR__scsi1__nop 0 -#define R_VECT_MASK_CLR__par1__BITNR 5 -#define R_VECT_MASK_CLR__par1__WIDTH 1 -#define R_VECT_MASK_CLR__par1__clr 1 -#define R_VECT_MASK_CLR__par1__nop 0 -#define R_VECT_MASK_CLR__scsi0__BITNR 4 -#define R_VECT_MASK_CLR__scsi0__WIDTH 1 -#define R_VECT_MASK_CLR__scsi0__clr 1 -#define R_VECT_MASK_CLR__scsi0__nop 0 -#define R_VECT_MASK_CLR__par0__BITNR 4 -#define R_VECT_MASK_CLR__par0__WIDTH 1 -#define R_VECT_MASK_CLR__par0__clr 1 -#define R_VECT_MASK_CLR__par0__nop 0 -#define R_VECT_MASK_CLR__ata__BITNR 4 -#define R_VECT_MASK_CLR__ata__WIDTH 1 -#define R_VECT_MASK_CLR__ata__clr 1 -#define R_VECT_MASK_CLR__ata__nop 0 -#define R_VECT_MASK_CLR__mio__BITNR 4 -#define R_VECT_MASK_CLR__mio__WIDTH 1 -#define R_VECT_MASK_CLR__mio__clr 1 -#define R_VECT_MASK_CLR__mio__nop 0 -#define R_VECT_MASK_CLR__timer1__BITNR 3 -#define R_VECT_MASK_CLR__timer1__WIDTH 1 -#define R_VECT_MASK_CLR__timer1__clr 1 -#define R_VECT_MASK_CLR__timer1__nop 0 -#define R_VECT_MASK_CLR__timer0__BITNR 2 -#define R_VECT_MASK_CLR__timer0__WIDTH 1 -#define R_VECT_MASK_CLR__timer0__clr 1 -#define R_VECT_MASK_CLR__timer0__nop 0 -#define R_VECT_MASK_CLR__nmi__BITNR 1 -#define R_VECT_MASK_CLR__nmi__WIDTH 1 -#define R_VECT_MASK_CLR__nmi__clr 1 -#define R_VECT_MASK_CLR__nmi__nop 0 -#define R_VECT_MASK_CLR__some__BITNR 0 -#define R_VECT_MASK_CLR__some__WIDTH 1 -#define R_VECT_MASK_CLR__some__clr 1 -#define R_VECT_MASK_CLR__some__nop 0 - -#define R_VECT_READ (IO_TYPECAST_RO_UDWORD 0xb00000dc) -#define R_VECT_READ__usb__BITNR 31 -#define R_VECT_READ__usb__WIDTH 1 -#define R_VECT_READ__usb__active 1 -#define R_VECT_READ__usb__inactive 0 -#define R_VECT_READ__dma9__BITNR 25 -#define R_VECT_READ__dma9__WIDTH 1 -#define R_VECT_READ__dma9__active 1 -#define R_VECT_READ__dma9__inactive 0 -#define R_VECT_READ__dma8__BITNR 24 -#define R_VECT_READ__dma8__WIDTH 1 -#define R_VECT_READ__dma8__active 1 -#define R_VECT_READ__dma8__inactive 0 -#define R_VECT_READ__dma7__BITNR 23 -#define R_VECT_READ__dma7__WIDTH 1 -#define R_VECT_READ__dma7__active 1 -#define R_VECT_READ__dma7__inactive 0 -#define R_VECT_READ__dma6__BITNR 22 -#define R_VECT_READ__dma6__WIDTH 1 -#define R_VECT_READ__dma6__active 1 -#define R_VECT_READ__dma6__inactive 0 -#define R_VECT_READ__dma5__BITNR 21 -#define R_VECT_READ__dma5__WIDTH 1 -#define R_VECT_READ__dma5__active 1 -#define R_VECT_READ__dma5__inactive 0 -#define R_VECT_READ__dma4__BITNR 20 -#define R_VECT_READ__dma4__WIDTH 1 -#define R_VECT_READ__dma4__active 1 -#define R_VECT_READ__dma4__inactive 0 -#define R_VECT_READ__dma3__BITNR 19 -#define R_VECT_READ__dma3__WIDTH 1 -#define R_VECT_READ__dma3__active 1 -#define R_VECT_READ__dma3__inactive 0 -#define R_VECT_READ__dma2__BITNR 18 -#define R_VECT_READ__dma2__WIDTH 1 -#define R_VECT_READ__dma2__active 1 -#define R_VECT_READ__dma2__inactive 0 -#define R_VECT_READ__dma1__BITNR 17 -#define R_VECT_READ__dma1__WIDTH 1 -#define R_VECT_READ__dma1__active 1 -#define R_VECT_READ__dma1__inactive 0 -#define R_VECT_READ__dma0__BITNR 16 -#define R_VECT_READ__dma0__WIDTH 1 -#define R_VECT_READ__dma0__active 1 -#define R_VECT_READ__dma0__inactive 0 -#define R_VECT_READ__ext_dma1__BITNR 13 -#define R_VECT_READ__ext_dma1__WIDTH 1 -#define R_VECT_READ__ext_dma1__active 1 -#define R_VECT_READ__ext_dma1__inactive 0 -#define R_VECT_READ__ext_dma0__BITNR 12 -#define R_VECT_READ__ext_dma0__WIDTH 1 -#define R_VECT_READ__ext_dma0__active 1 -#define R_VECT_READ__ext_dma0__inactive 0 -#define R_VECT_READ__pa__BITNR 11 -#define R_VECT_READ__pa__WIDTH 1 -#define R_VECT_READ__pa__active 1 -#define R_VECT_READ__pa__inactive 0 -#define R_VECT_READ__irq_intnr__BITNR 10 -#define R_VECT_READ__irq_intnr__WIDTH 1 -#define R_VECT_READ__irq_intnr__active 1 -#define R_VECT_READ__irq_intnr__inactive 0 -#define R_VECT_READ__sw__BITNR 9 -#define R_VECT_READ__sw__WIDTH 1 -#define R_VECT_READ__sw__active 1 -#define R_VECT_READ__sw__inactive 0 -#define R_VECT_READ__serial__BITNR 8 -#define R_VECT_READ__serial__WIDTH 1 -#define R_VECT_READ__serial__active 1 -#define R_VECT_READ__serial__inactive 0 -#define R_VECT_READ__snmp__BITNR 7 -#define R_VECT_READ__snmp__WIDTH 1 -#define R_VECT_READ__snmp__active 1 -#define R_VECT_READ__snmp__inactive 0 -#define R_VECT_READ__network__BITNR 6 -#define R_VECT_READ__network__WIDTH 1 -#define R_VECT_READ__network__active 1 -#define R_VECT_READ__network__inactive 0 -#define R_VECT_READ__scsi1__BITNR 5 -#define R_VECT_READ__scsi1__WIDTH 1 -#define R_VECT_READ__scsi1__active 1 -#define R_VECT_READ__scsi1__inactive 0 -#define R_VECT_READ__par1__BITNR 5 -#define R_VECT_READ__par1__WIDTH 1 -#define R_VECT_READ__par1__active 1 -#define R_VECT_READ__par1__inactive 0 -#define R_VECT_READ__scsi0__BITNR 4 -#define R_VECT_READ__scsi0__WIDTH 1 -#define R_VECT_READ__scsi0__active 1 -#define R_VECT_READ__scsi0__inactive 0 -#define R_VECT_READ__par0__BITNR 4 -#define R_VECT_READ__par0__WIDTH 1 -#define R_VECT_READ__par0__active 1 -#define R_VECT_READ__par0__inactive 0 -#define R_VECT_READ__ata__BITNR 4 -#define R_VECT_READ__ata__WIDTH 1 -#define R_VECT_READ__ata__active 1 -#define R_VECT_READ__ata__inactive 0 -#define R_VECT_READ__mio__BITNR 4 -#define R_VECT_READ__mio__WIDTH 1 -#define R_VECT_READ__mio__active 1 -#define R_VECT_READ__mio__inactive 0 -#define R_VECT_READ__timer1__BITNR 3 -#define R_VECT_READ__timer1__WIDTH 1 -#define R_VECT_READ__timer1__active 1 -#define R_VECT_READ__timer1__inactive 0 -#define R_VECT_READ__timer0__BITNR 2 -#define R_VECT_READ__timer0__WIDTH 1 -#define R_VECT_READ__timer0__active 1 -#define R_VECT_READ__timer0__inactive 0 -#define R_VECT_READ__nmi__BITNR 1 -#define R_VECT_READ__nmi__WIDTH 1 -#define R_VECT_READ__nmi__active 1 -#define R_VECT_READ__nmi__inactive 0 -#define R_VECT_READ__some__BITNR 0 -#define R_VECT_READ__some__WIDTH 1 -#define R_VECT_READ__some__active 1 -#define R_VECT_READ__some__inactive 0 - -#define R_VECT_MASK_SET (IO_TYPECAST_UDWORD 0xb00000dc) -#define R_VECT_MASK_SET__usb__BITNR 31 -#define R_VECT_MASK_SET__usb__WIDTH 1 -#define R_VECT_MASK_SET__usb__set 1 -#define R_VECT_MASK_SET__usb__nop 0 -#define R_VECT_MASK_SET__dma9__BITNR 25 -#define R_VECT_MASK_SET__dma9__WIDTH 1 -#define R_VECT_MASK_SET__dma9__set 1 -#define R_VECT_MASK_SET__dma9__nop 0 -#define R_VECT_MASK_SET__dma8__BITNR 24 -#define R_VECT_MASK_SET__dma8__WIDTH 1 -#define R_VECT_MASK_SET__dma8__set 1 -#define R_VECT_MASK_SET__dma8__nop 0 -#define R_VECT_MASK_SET__dma7__BITNR 23 -#define R_VECT_MASK_SET__dma7__WIDTH 1 -#define R_VECT_MASK_SET__dma7__set 1 -#define R_VECT_MASK_SET__dma7__nop 0 -#define R_VECT_MASK_SET__dma6__BITNR 22 -#define R_VECT_MASK_SET__dma6__WIDTH 1 -#define R_VECT_MASK_SET__dma6__set 1 -#define R_VECT_MASK_SET__dma6__nop 0 -#define R_VECT_MASK_SET__dma5__BITNR 21 -#define R_VECT_MASK_SET__dma5__WIDTH 1 -#define R_VECT_MASK_SET__dma5__set 1 -#define R_VECT_MASK_SET__dma5__nop 0 -#define R_VECT_MASK_SET__dma4__BITNR 20 -#define R_VECT_MASK_SET__dma4__WIDTH 1 -#define R_VECT_MASK_SET__dma4__set 1 -#define R_VECT_MASK_SET__dma4__nop 0 -#define R_VECT_MASK_SET__dma3__BITNR 19 -#define R_VECT_MASK_SET__dma3__WIDTH 1 -#define R_VECT_MASK_SET__dma3__set 1 -#define R_VECT_MASK_SET__dma3__nop 0 -#define R_VECT_MASK_SET__dma2__BITNR 18 -#define R_VECT_MASK_SET__dma2__WIDTH 1 -#define R_VECT_MASK_SET__dma2__set 1 -#define R_VECT_MASK_SET__dma2__nop 0 -#define R_VECT_MASK_SET__dma1__BITNR 17 -#define R_VECT_MASK_SET__dma1__WIDTH 1 -#define R_VECT_MASK_SET__dma1__set 1 -#define R_VECT_MASK_SET__dma1__nop 0 -#define R_VECT_MASK_SET__dma0__BITNR 16 -#define R_VECT_MASK_SET__dma0__WIDTH 1 -#define R_VECT_MASK_SET__dma0__set 1 -#define R_VECT_MASK_SET__dma0__nop 0 -#define R_VECT_MASK_SET__ext_dma1__BITNR 13 -#define R_VECT_MASK_SET__ext_dma1__WIDTH 1 -#define R_VECT_MASK_SET__ext_dma1__set 1 -#define R_VECT_MASK_SET__ext_dma1__nop 0 -#define R_VECT_MASK_SET__ext_dma0__BITNR 12 -#define R_VECT_MASK_SET__ext_dma0__WIDTH 1 -#define R_VECT_MASK_SET__ext_dma0__set 1 -#define R_VECT_MASK_SET__ext_dma0__nop 0 -#define R_VECT_MASK_SET__pa__BITNR 11 -#define R_VECT_MASK_SET__pa__WIDTH 1 -#define R_VECT_MASK_SET__pa__set 1 -#define R_VECT_MASK_SET__pa__nop 0 -#define R_VECT_MASK_SET__irq_intnr__BITNR 10 -#define R_VECT_MASK_SET__irq_intnr__WIDTH 1 -#define R_VECT_MASK_SET__irq_intnr__set 1 -#define R_VECT_MASK_SET__irq_intnr__nop 0 -#define R_VECT_MASK_SET__sw__BITNR 9 -#define R_VECT_MASK_SET__sw__WIDTH 1 -#define R_VECT_MASK_SET__sw__set 1 -#define R_VECT_MASK_SET__sw__nop 0 -#define R_VECT_MASK_SET__serial__BITNR 8 -#define R_VECT_MASK_SET__serial__WIDTH 1 -#define R_VECT_MASK_SET__serial__set 1 -#define R_VECT_MASK_SET__serial__nop 0 -#define R_VECT_MASK_SET__snmp__BITNR 7 -#define R_VECT_MASK_SET__snmp__WIDTH 1 -#define R_VECT_MASK_SET__snmp__set 1 -#define R_VECT_MASK_SET__snmp__nop 0 -#define R_VECT_MASK_SET__network__BITNR 6 -#define R_VECT_MASK_SET__network__WIDTH 1 -#define R_VECT_MASK_SET__network__set 1 -#define R_VECT_MASK_SET__network__nop 0 -#define R_VECT_MASK_SET__scsi1__BITNR 5 -#define R_VECT_MASK_SET__scsi1__WIDTH 1 -#define R_VECT_MASK_SET__scsi1__set 1 -#define R_VECT_MASK_SET__scsi1__nop 0 -#define R_VECT_MASK_SET__par1__BITNR 5 -#define R_VECT_MASK_SET__par1__WIDTH 1 -#define R_VECT_MASK_SET__par1__set 1 -#define R_VECT_MASK_SET__par1__nop 0 -#define R_VECT_MASK_SET__scsi0__BITNR 4 -#define R_VECT_MASK_SET__scsi0__WIDTH 1 -#define R_VECT_MASK_SET__scsi0__set 1 -#define R_VECT_MASK_SET__scsi0__nop 0 -#define R_VECT_MASK_SET__par0__BITNR 4 -#define R_VECT_MASK_SET__par0__WIDTH 1 -#define R_VECT_MASK_SET__par0__set 1 -#define R_VECT_MASK_SET__par0__nop 0 -#define R_VECT_MASK_SET__ata__BITNR 4 -#define R_VECT_MASK_SET__ata__WIDTH 1 -#define R_VECT_MASK_SET__ata__set 1 -#define R_VECT_MASK_SET__ata__nop 0 -#define R_VECT_MASK_SET__mio__BITNR 4 -#define R_VECT_MASK_SET__mio__WIDTH 1 -#define R_VECT_MASK_SET__mio__set 1 -#define R_VECT_MASK_SET__mio__nop 0 -#define R_VECT_MASK_SET__timer1__BITNR 3 -#define R_VECT_MASK_SET__timer1__WIDTH 1 -#define R_VECT_MASK_SET__timer1__set 1 -#define R_VECT_MASK_SET__timer1__nop 0 -#define R_VECT_MASK_SET__timer0__BITNR 2 -#define R_VECT_MASK_SET__timer0__WIDTH 1 -#define R_VECT_MASK_SET__timer0__set 1 -#define R_VECT_MASK_SET__timer0__nop 0 -#define R_VECT_MASK_SET__nmi__BITNR 1 -#define R_VECT_MASK_SET__nmi__WIDTH 1 -#define R_VECT_MASK_SET__nmi__set 1 -#define R_VECT_MASK_SET__nmi__nop 0 -#define R_VECT_MASK_SET__some__BITNR 0 -#define R_VECT_MASK_SET__some__WIDTH 1 -#define R_VECT_MASK_SET__some__set 1 -#define R_VECT_MASK_SET__some__nop 0 - -/* -!* DMA registers -!*/ - -#define R_SET_EOP (IO_TYPECAST_UDWORD 0xb000003c) -#define R_SET_EOP__ch9_eop__BITNR 3 -#define R_SET_EOP__ch9_eop__WIDTH 1 -#define R_SET_EOP__ch9_eop__set 1 -#define R_SET_EOP__ch9_eop__nop 0 -#define R_SET_EOP__ch7_eop__BITNR 2 -#define R_SET_EOP__ch7_eop__WIDTH 1 -#define R_SET_EOP__ch7_eop__set 1 -#define R_SET_EOP__ch7_eop__nop 0 -#define R_SET_EOP__ch5_eop__BITNR 1 -#define R_SET_EOP__ch5_eop__WIDTH 1 -#define R_SET_EOP__ch5_eop__set 1 -#define R_SET_EOP__ch5_eop__nop 0 -#define R_SET_EOP__ch3_eop__BITNR 0 -#define R_SET_EOP__ch3_eop__WIDTH 1 -#define R_SET_EOP__ch3_eop__set 1 -#define R_SET_EOP__ch3_eop__nop 0 - -#define R_DMA_CH0_HWSW (IO_TYPECAST_UDWORD 0xb0000100) -#define R_DMA_CH0_HWSW__hw__BITNR 16 -#define R_DMA_CH0_HWSW__hw__WIDTH 16 -#define R_DMA_CH0_HWSW__sw__BITNR 0 -#define R_DMA_CH0_HWSW__sw__WIDTH 16 - -#define R_DMA_CH0_DESCR (IO_TYPECAST_UDWORD 0xb000010c) -#define R_DMA_CH0_DESCR__descr__BITNR 0 -#define R_DMA_CH0_DESCR__descr__WIDTH 32 - -#define R_DMA_CH0_NEXT (IO_TYPECAST_UDWORD 0xb0000104) -#define R_DMA_CH0_NEXT__next__BITNR 0 -#define R_DMA_CH0_NEXT__next__WIDTH 32 - -#define R_DMA_CH0_BUF (IO_TYPECAST_UDWORD 0xb0000108) -#define R_DMA_CH0_BUF__buf__BITNR 0 -#define R_DMA_CH0_BUF__buf__WIDTH 32 - -#define R_DMA_CH0_FIRST (IO_TYPECAST_UDWORD 0xb00001a0) -#define R_DMA_CH0_FIRST__first__BITNR 0 -#define R_DMA_CH0_FIRST__first__WIDTH 32 - -#define R_DMA_CH0_CMD (IO_TYPECAST_BYTE 0xb00001d0) -#define R_DMA_CH0_CMD__cmd__BITNR 0 -#define R_DMA_CH0_CMD__cmd__WIDTH 3 -#define R_DMA_CH0_CMD__cmd__hold 0 -#define R_DMA_CH0_CMD__cmd__start 1 -#define R_DMA_CH0_CMD__cmd__restart 3 -#define R_DMA_CH0_CMD__cmd__continue 3 -#define R_DMA_CH0_CMD__cmd__reset 4 - -#define R_DMA_CH0_CLR_INTR (IO_TYPECAST_BYTE 0xb00001d1) -#define R_DMA_CH0_CLR_INTR__clr_eop__BITNR 1 -#define R_DMA_CH0_CLR_INTR__clr_eop__WIDTH 1 -#define R_DMA_CH0_CLR_INTR__clr_eop__do 1 -#define R_DMA_CH0_CLR_INTR__clr_eop__dont 0 -#define R_DMA_CH0_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH0_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH0_CLR_INTR__clr_descr__do 1 -#define R_DMA_CH0_CLR_INTR__clr_descr__dont 0 - -#define R_DMA_CH0_STATUS (IO_TYPECAST_RO_BYTE 0xb00001d2) -#define R_DMA_CH0_STATUS__avail__BITNR 0 -#define R_DMA_CH0_STATUS__avail__WIDTH 7 - -#define R_DMA_CH1_HWSW (IO_TYPECAST_UDWORD 0xb0000110) -#define R_DMA_CH1_HWSW__hw__BITNR 16 -#define R_DMA_CH1_HWSW__hw__WIDTH 16 -#define R_DMA_CH1_HWSW__sw__BITNR 0 -#define R_DMA_CH1_HWSW__sw__WIDTH 16 - -#define R_DMA_CH1_DESCR (IO_TYPECAST_UDWORD 0xb000011c) -#define R_DMA_CH1_DESCR__descr__BITNR 0 -#define R_DMA_CH1_DESCR__descr__WIDTH 32 - -#define R_DMA_CH1_NEXT (IO_TYPECAST_UDWORD 0xb0000114) -#define R_DMA_CH1_NEXT__next__BITNR 0 -#define R_DMA_CH1_NEXT__next__WIDTH 32 - -#define R_DMA_CH1_BUF (IO_TYPECAST_UDWORD 0xb0000118) -#define R_DMA_CH1_BUF__buf__BITNR 0 -#define R_DMA_CH1_BUF__buf__WIDTH 32 - -#define R_DMA_CH1_FIRST (IO_TYPECAST_UDWORD 0xb00001a4) -#define R_DMA_CH1_FIRST__first__BITNR 0 -#define R_DMA_CH1_FIRST__first__WIDTH 32 - -#define R_DMA_CH1_CMD (IO_TYPECAST_BYTE 0xb00001d4) -#define R_DMA_CH1_CMD__cmd__BITNR 0 -#define R_DMA_CH1_CMD__cmd__WIDTH 3 -#define R_DMA_CH1_CMD__cmd__hold 0 -#define R_DMA_CH1_CMD__cmd__start 1 -#define R_DMA_CH1_CMD__cmd__restart 3 -#define R_DMA_CH1_CMD__cmd__continue 3 -#define R_DMA_CH1_CMD__cmd__reset 4 - -#define R_DMA_CH1_CLR_INTR (IO_TYPECAST_BYTE 0xb00001d5) -#define R_DMA_CH1_CLR_INTR__clr_eop__BITNR 1 -#define R_DMA_CH1_CLR_INTR__clr_eop__WIDTH 1 -#define R_DMA_CH1_CLR_INTR__clr_eop__do 1 -#define R_DMA_CH1_CLR_INTR__clr_eop__dont 0 -#define R_DMA_CH1_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH1_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH1_CLR_INTR__clr_descr__do 1 -#define R_DMA_CH1_CLR_INTR__clr_descr__dont 0 - -#define R_DMA_CH1_STATUS (IO_TYPECAST_RO_BYTE 0xb00001d6) -#define R_DMA_CH1_STATUS__avail__BITNR 0 -#define R_DMA_CH1_STATUS__avail__WIDTH 7 - -#define R_DMA_CH2_HWSW (IO_TYPECAST_UDWORD 0xb0000120) -#define R_DMA_CH2_HWSW__hw__BITNR 16 -#define R_DMA_CH2_HWSW__hw__WIDTH 16 -#define R_DMA_CH2_HWSW__sw__BITNR 0 -#define R_DMA_CH2_HWSW__sw__WIDTH 16 - -#define R_DMA_CH2_DESCR (IO_TYPECAST_UDWORD 0xb000012c) -#define R_DMA_CH2_DESCR__descr__BITNR 0 -#define R_DMA_CH2_DESCR__descr__WIDTH 32 - -#define R_DMA_CH2_NEXT (IO_TYPECAST_UDWORD 0xb0000124) -#define R_DMA_CH2_NEXT__next__BITNR 0 -#define R_DMA_CH2_NEXT__next__WIDTH 32 - -#define R_DMA_CH2_BUF (IO_TYPECAST_UDWORD 0xb0000128) -#define R_DMA_CH2_BUF__buf__BITNR 0 -#define R_DMA_CH2_BUF__buf__WIDTH 32 - -#define R_DMA_CH2_FIRST (IO_TYPECAST_UDWORD 0xb00001a8) -#define R_DMA_CH2_FIRST__first__BITNR 0 -#define R_DMA_CH2_FIRST__first__WIDTH 32 - -#define R_DMA_CH2_CMD (IO_TYPECAST_BYTE 0xb00001d8) -#define R_DMA_CH2_CMD__cmd__BITNR 0 -#define R_DMA_CH2_CMD__cmd__WIDTH 3 -#define R_DMA_CH2_CMD__cmd__hold 0 -#define R_DMA_CH2_CMD__cmd__start 1 -#define R_DMA_CH2_CMD__cmd__restart 3 -#define R_DMA_CH2_CMD__cmd__continue 3 -#define R_DMA_CH2_CMD__cmd__reset 4 - -#define R_DMA_CH2_CLR_INTR (IO_TYPECAST_BYTE 0xb00001d9) -#define R_DMA_CH2_CLR_INTR__clr_eop__BITNR 1 -#define R_DMA_CH2_CLR_INTR__clr_eop__WIDTH 1 -#define R_DMA_CH2_CLR_INTR__clr_eop__do 1 -#define R_DMA_CH2_CLR_INTR__clr_eop__dont 0 -#define R_DMA_CH2_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH2_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH2_CLR_INTR__clr_descr__do 1 -#define R_DMA_CH2_CLR_INTR__clr_descr__dont 0 - -#define R_DMA_CH2_STATUS (IO_TYPECAST_RO_BYTE 0xb00001da) -#define R_DMA_CH2_STATUS__avail__BITNR 0 -#define R_DMA_CH2_STATUS__avail__WIDTH 7 - -#define R_DMA_CH3_HWSW (IO_TYPECAST_UDWORD 0xb0000130) -#define R_DMA_CH3_HWSW__hw__BITNR 16 -#define R_DMA_CH3_HWSW__hw__WIDTH 16 -#define R_DMA_CH3_HWSW__sw__BITNR 0 -#define R_DMA_CH3_HWSW__sw__WIDTH 16 - -#define R_DMA_CH3_DESCR (IO_TYPECAST_UDWORD 0xb000013c) -#define R_DMA_CH3_DESCR__descr__BITNR 0 -#define R_DMA_CH3_DESCR__descr__WIDTH 32 - -#define R_DMA_CH3_NEXT (IO_TYPECAST_UDWORD 0xb0000134) -#define R_DMA_CH3_NEXT__next__BITNR 0 -#define R_DMA_CH3_NEXT__next__WIDTH 32 - -#define R_DMA_CH3_BUF (IO_TYPECAST_UDWORD 0xb0000138) -#define R_DMA_CH3_BUF__buf__BITNR 0 -#define R_DMA_CH3_BUF__buf__WIDTH 32 - -#define R_DMA_CH3_FIRST (IO_TYPECAST_UDWORD 0xb00001ac) -#define R_DMA_CH3_FIRST__first__BITNR 0 -#define R_DMA_CH3_FIRST__first__WIDTH 32 - -#define R_DMA_CH3_CMD (IO_TYPECAST_BYTE 0xb00001dc) -#define R_DMA_CH3_CMD__cmd__BITNR 0 -#define R_DMA_CH3_CMD__cmd__WIDTH 3 -#define R_DMA_CH3_CMD__cmd__hold 0 -#define R_DMA_CH3_CMD__cmd__start 1 -#define R_DMA_CH3_CMD__cmd__restart 3 -#define R_DMA_CH3_CMD__cmd__continue 3 -#define R_DMA_CH3_CMD__cmd__reset 4 - -#define R_DMA_CH3_CLR_INTR (IO_TYPECAST_BYTE 0xb00001dd) -#define R_DMA_CH3_CLR_INTR__clr_eop__BITNR 1 -#define R_DMA_CH3_CLR_INTR__clr_eop__WIDTH 1 -#define R_DMA_CH3_CLR_INTR__clr_eop__do 1 -#define R_DMA_CH3_CLR_INTR__clr_eop__dont 0 -#define R_DMA_CH3_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH3_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH3_CLR_INTR__clr_descr__do 1 -#define R_DMA_CH3_CLR_INTR__clr_descr__dont 0 - -#define R_DMA_CH3_STATUS (IO_TYPECAST_RO_BYTE 0xb00001de) -#define R_DMA_CH3_STATUS__avail__BITNR 0 -#define R_DMA_CH3_STATUS__avail__WIDTH 7 - -#define R_DMA_CH4_HWSW (IO_TYPECAST_UDWORD 0xb0000140) -#define R_DMA_CH4_HWSW__hw__BITNR 16 -#define R_DMA_CH4_HWSW__hw__WIDTH 16 -#define R_DMA_CH4_HWSW__sw__BITNR 0 -#define R_DMA_CH4_HWSW__sw__WIDTH 16 - -#define R_DMA_CH4_DESCR (IO_TYPECAST_UDWORD 0xb000014c) -#define R_DMA_CH4_DESCR__descr__BITNR 0 -#define R_DMA_CH4_DESCR__descr__WIDTH 32 - -#define R_DMA_CH4_NEXT (IO_TYPECAST_UDWORD 0xb0000144) -#define R_DMA_CH4_NEXT__next__BITNR 0 -#define R_DMA_CH4_NEXT__next__WIDTH 32 - -#define R_DMA_CH4_BUF (IO_TYPECAST_UDWORD 0xb0000148) -#define R_DMA_CH4_BUF__buf__BITNR 0 -#define R_DMA_CH4_BUF__buf__WIDTH 32 - -#define R_DMA_CH4_FIRST (IO_TYPECAST_UDWORD 0xb00001b0) -#define R_DMA_CH4_FIRST__first__BITNR 0 -#define R_DMA_CH4_FIRST__first__WIDTH 32 - -#define R_DMA_CH4_CMD (IO_TYPECAST_BYTE 0xb00001e0) -#define R_DMA_CH4_CMD__cmd__BITNR 0 -#define R_DMA_CH4_CMD__cmd__WIDTH 3 -#define R_DMA_CH4_CMD__cmd__hold 0 -#define R_DMA_CH4_CMD__cmd__start 1 -#define R_DMA_CH4_CMD__cmd__restart 3 -#define R_DMA_CH4_CMD__cmd__continue 3 -#define R_DMA_CH4_CMD__cmd__reset 4 - -#define R_DMA_CH4_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e1) -#define R_DMA_CH4_CLR_INTR__clr_eop__BITNR 1 -#define R_DMA_CH4_CLR_INTR__clr_eop__WIDTH 1 -#define R_DMA_CH4_CLR_INTR__clr_eop__do 1 -#define R_DMA_CH4_CLR_INTR__clr_eop__dont 0 -#define R_DMA_CH4_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH4_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH4_CLR_INTR__clr_descr__do 1 -#define R_DMA_CH4_CLR_INTR__clr_descr__dont 0 - -#define R_DMA_CH4_STATUS (IO_TYPECAST_RO_BYTE 0xb00001e2) -#define R_DMA_CH4_STATUS__avail__BITNR 0 -#define R_DMA_CH4_STATUS__avail__WIDTH 7 - -#define R_DMA_CH5_HWSW (IO_TYPECAST_UDWORD 0xb0000150) -#define R_DMA_CH5_HWSW__hw__BITNR 16 -#define R_DMA_CH5_HWSW__hw__WIDTH 16 -#define R_DMA_CH5_HWSW__sw__BITNR 0 -#define R_DMA_CH5_HWSW__sw__WIDTH 16 - -#define R_DMA_CH5_DESCR (IO_TYPECAST_UDWORD 0xb000015c) -#define R_DMA_CH5_DESCR__descr__BITNR 0 -#define R_DMA_CH5_DESCR__descr__WIDTH 32 - -#define R_DMA_CH5_NEXT (IO_TYPECAST_UDWORD 0xb0000154) -#define R_DMA_CH5_NEXT__next__BITNR 0 -#define R_DMA_CH5_NEXT__next__WIDTH 32 - -#define R_DMA_CH5_BUF (IO_TYPECAST_UDWORD 0xb0000158) -#define R_DMA_CH5_BUF__buf__BITNR 0 -#define R_DMA_CH5_BUF__buf__WIDTH 32 - -#define R_DMA_CH5_FIRST (IO_TYPECAST_UDWORD 0xb00001b4) -#define R_DMA_CH5_FIRST__first__BITNR 0 -#define R_DMA_CH5_FIRST__first__WIDTH 32 - -#define R_DMA_CH5_CMD (IO_TYPECAST_BYTE 0xb00001e4) -#define R_DMA_CH5_CMD__cmd__BITNR 0 -#define R_DMA_CH5_CMD__cmd__WIDTH 3 -#define R_DMA_CH5_CMD__cmd__hold 0 -#define R_DMA_CH5_CMD__cmd__start 1 -#define R_DMA_CH5_CMD__cmd__restart 3 -#define R_DMA_CH5_CMD__cmd__continue 3 -#define R_DMA_CH5_CMD__cmd__reset 4 - -#define R_DMA_CH5_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e5) -#define R_DMA_CH5_CLR_INTR__clr_eop__BITNR 1 -#define R_DMA_CH5_CLR_INTR__clr_eop__WIDTH 1 -#define R_DMA_CH5_CLR_INTR__clr_eop__do 1 -#define R_DMA_CH5_CLR_INTR__clr_eop__dont 0 -#define R_DMA_CH5_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH5_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH5_CLR_INTR__clr_descr__do 1 -#define R_DMA_CH5_CLR_INTR__clr_descr__dont 0 - -#define R_DMA_CH5_STATUS (IO_TYPECAST_RO_BYTE 0xb00001e6) -#define R_DMA_CH5_STATUS__avail__BITNR 0 -#define R_DMA_CH5_STATUS__avail__WIDTH 7 - -#define R_DMA_CH6_HWSW (IO_TYPECAST_UDWORD 0xb0000160) -#define R_DMA_CH6_HWSW__hw__BITNR 16 -#define R_DMA_CH6_HWSW__hw__WIDTH 16 -#define R_DMA_CH6_HWSW__sw__BITNR 0 -#define R_DMA_CH6_HWSW__sw__WIDTH 16 - -#define R_DMA_CH6_DESCR (IO_TYPECAST_UDWORD 0xb000016c) -#define R_DMA_CH6_DESCR__descr__BITNR 0 -#define R_DMA_CH6_DESCR__descr__WIDTH 32 - -#define R_DMA_CH6_NEXT (IO_TYPECAST_UDWORD 0xb0000164) -#define R_DMA_CH6_NEXT__next__BITNR 0 -#define R_DMA_CH6_NEXT__next__WIDTH 32 - -#define R_DMA_CH6_BUF (IO_TYPECAST_UDWORD 0xb0000168) -#define R_DMA_CH6_BUF__buf__BITNR 0 -#define R_DMA_CH6_BUF__buf__WIDTH 32 - -#define R_DMA_CH6_FIRST (IO_TYPECAST_UDWORD 0xb00001b8) -#define R_DMA_CH6_FIRST__first__BITNR 0 -#define R_DMA_CH6_FIRST__first__WIDTH 32 - -#define R_DMA_CH6_CMD (IO_TYPECAST_BYTE 0xb00001e8) -#define R_DMA_CH6_CMD__cmd__BITNR 0 -#define R_DMA_CH6_CMD__cmd__WIDTH 3 -#define R_DMA_CH6_CMD__cmd__hold 0 -#define R_DMA_CH6_CMD__cmd__start 1 -#define R_DMA_CH6_CMD__cmd__restart 3 -#define R_DMA_CH6_CMD__cmd__continue 3 -#define R_DMA_CH6_CMD__cmd__reset 4 - -#define R_DMA_CH6_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e9) -#define R_DMA_CH6_CLR_INTR__clr_eop__BITNR 1 -#define R_DMA_CH6_CLR_INTR__clr_eop__WIDTH 1 -#define R_DMA_CH6_CLR_INTR__clr_eop__do 1 -#define R_DMA_CH6_CLR_INTR__clr_eop__dont 0 -#define R_DMA_CH6_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH6_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH6_CLR_INTR__clr_descr__do 1 -#define R_DMA_CH6_CLR_INTR__clr_descr__dont 0 - -#define R_DMA_CH6_STATUS (IO_TYPECAST_RO_BYTE 0xb00001ea) -#define R_DMA_CH6_STATUS__avail__BITNR 0 -#define R_DMA_CH6_STATUS__avail__WIDTH 7 - -#define R_DMA_CH7_HWSW (IO_TYPECAST_UDWORD 0xb0000170) -#define R_DMA_CH7_HWSW__hw__BITNR 16 -#define R_DMA_CH7_HWSW__hw__WIDTH 16 -#define R_DMA_CH7_HWSW__sw__BITNR 0 -#define R_DMA_CH7_HWSW__sw__WIDTH 16 - -#define R_DMA_CH7_DESCR (IO_TYPECAST_UDWORD 0xb000017c) -#define R_DMA_CH7_DESCR__descr__BITNR 0 -#define R_DMA_CH7_DESCR__descr__WIDTH 32 - -#define R_DMA_CH7_NEXT (IO_TYPECAST_UDWORD 0xb0000174) -#define R_DMA_CH7_NEXT__next__BITNR 0 -#define R_DMA_CH7_NEXT__next__WIDTH 32 - -#define R_DMA_CH7_BUF (IO_TYPECAST_UDWORD 0xb0000178) -#define R_DMA_CH7_BUF__buf__BITNR 0 -#define R_DMA_CH7_BUF__buf__WIDTH 32 - -#define R_DMA_CH7_FIRST (IO_TYPECAST_UDWORD 0xb00001bc) -#define R_DMA_CH7_FIRST__first__BITNR 0 -#define R_DMA_CH7_FIRST__first__WIDTH 32 - -#define R_DMA_CH7_CMD (IO_TYPECAST_BYTE 0xb00001ec) -#define R_DMA_CH7_CMD__cmd__BITNR 0 -#define R_DMA_CH7_CMD__cmd__WIDTH 3 -#define R_DMA_CH7_CMD__cmd__hold 0 -#define R_DMA_CH7_CMD__cmd__start 1 -#define R_DMA_CH7_CMD__cmd__restart 3 -#define R_DMA_CH7_CMD__cmd__continue 3 -#define R_DMA_CH7_CMD__cmd__reset 4 - -#define R_DMA_CH7_CLR_INTR (IO_TYPECAST_BYTE 0xb00001ed) -#define R_DMA_CH7_CLR_INTR__clr_eop__BITNR 1 -#define R_DMA_CH7_CLR_INTR__clr_eop__WIDTH 1 -#define R_DMA_CH7_CLR_INTR__clr_eop__do 1 -#define R_DMA_CH7_CLR_INTR__clr_eop__dont 0 -#define R_DMA_CH7_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH7_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH7_CLR_INTR__clr_descr__do 1 -#define R_DMA_CH7_CLR_INTR__clr_descr__dont 0 - -#define R_DMA_CH7_STATUS (IO_TYPECAST_RO_BYTE 0xb00001ee) -#define R_DMA_CH7_STATUS__avail__BITNR 0 -#define R_DMA_CH7_STATUS__avail__WIDTH 7 - -#define R_DMA_CH8_HWSW (IO_TYPECAST_UDWORD 0xb0000180) -#define R_DMA_CH8_HWSW__hw__BITNR 16 -#define R_DMA_CH8_HWSW__hw__WIDTH 16 -#define R_DMA_CH8_HWSW__sw__BITNR 0 -#define R_DMA_CH8_HWSW__sw__WIDTH 16 - -#define R_DMA_CH8_DESCR (IO_TYPECAST_UDWORD 0xb000018c) -#define R_DMA_CH8_DESCR__descr__BITNR 0 -#define R_DMA_CH8_DESCR__descr__WIDTH 32 - -#define R_DMA_CH8_NEXT (IO_TYPECAST_UDWORD 0xb0000184) -#define R_DMA_CH8_NEXT__next__BITNR 0 -#define R_DMA_CH8_NEXT__next__WIDTH 32 - -#define R_DMA_CH8_BUF (IO_TYPECAST_UDWORD 0xb0000188) -#define R_DMA_CH8_BUF__buf__BITNR 0 -#define R_DMA_CH8_BUF__buf__WIDTH 32 - -#define R_DMA_CH8_FIRST (IO_TYPECAST_UDWORD 0xb00001c0) -#define R_DMA_CH8_FIRST__first__BITNR 0 -#define R_DMA_CH8_FIRST__first__WIDTH 32 - -#define R_DMA_CH8_CMD (IO_TYPECAST_BYTE 0xb00001f0) -#define R_DMA_CH8_CMD__cmd__BITNR 0 -#define R_DMA_CH8_CMD__cmd__WIDTH 3 -#define R_DMA_CH8_CMD__cmd__hold 0 -#define R_DMA_CH8_CMD__cmd__start 1 -#define R_DMA_CH8_CMD__cmd__restart 3 -#define R_DMA_CH8_CMD__cmd__continue 3 -#define R_DMA_CH8_CMD__cmd__reset 4 - -#define R_DMA_CH8_CLR_INTR (IO_TYPECAST_BYTE 0xb00001f1) -#define R_DMA_CH8_CLR_INTR__clr_eop__BITNR 1 -#define R_DMA_CH8_CLR_INTR__clr_eop__WIDTH 1 -#define R_DMA_CH8_CLR_INTR__clr_eop__do 1 -#define R_DMA_CH8_CLR_INTR__clr_eop__dont 0 -#define R_DMA_CH8_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH8_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH8_CLR_INTR__clr_descr__do 1 -#define R_DMA_CH8_CLR_INTR__clr_descr__dont 0 - -#define R_DMA_CH8_STATUS (IO_TYPECAST_RO_BYTE 0xb00001f2) -#define R_DMA_CH8_STATUS__avail__BITNR 0 -#define R_DMA_CH8_STATUS__avail__WIDTH 7 - -#define R_DMA_CH8_SUB (IO_TYPECAST_UDWORD 0xb000018c) -#define R_DMA_CH8_SUB__sub__BITNR 0 -#define R_DMA_CH8_SUB__sub__WIDTH 32 - -#define R_DMA_CH8_NEP (IO_TYPECAST_UDWORD 0xb00001c0) -#define R_DMA_CH8_NEP__nep__BITNR 0 -#define R_DMA_CH8_NEP__nep__WIDTH 32 - -#define R_DMA_CH8_SUB0_EP (IO_TYPECAST_UDWORD 0xb00001c8) -#define R_DMA_CH8_SUB0_EP__ep__BITNR 0 -#define R_DMA_CH8_SUB0_EP__ep__WIDTH 32 - -#define R_DMA_CH8_SUB0_CMD (IO_TYPECAST_BYTE 0xb00001d3) -#define R_DMA_CH8_SUB0_CMD__cmd__BITNR 0 -#define R_DMA_CH8_SUB0_CMD__cmd__WIDTH 1 -#define R_DMA_CH8_SUB0_CMD__cmd__stop 0 -#define R_DMA_CH8_SUB0_CMD__cmd__start 1 - -#define R_DMA_CH8_SUB0_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e3) -#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__dont 0 -#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__do 1 - -#define R_DMA_CH8_SUB1_EP (IO_TYPECAST_UDWORD 0xb00001cc) -#define R_DMA_CH8_SUB1_EP__ep__BITNR 0 -#define R_DMA_CH8_SUB1_EP__ep__WIDTH 32 - -#define R_DMA_CH8_SUB1_CMD (IO_TYPECAST_BYTE 0xb00001d7) -#define R_DMA_CH8_SUB1_CMD__cmd__BITNR 0 -#define R_DMA_CH8_SUB1_CMD__cmd__WIDTH 1 -#define R_DMA_CH8_SUB1_CMD__cmd__stop 0 -#define R_DMA_CH8_SUB1_CMD__cmd__start 1 - -#define R_DMA_CH8_SUB1_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e7) -#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__dont 0 -#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__do 1 - -#define R_DMA_CH8_SUB2_EP (IO_TYPECAST_UDWORD 0xb00001f8) -#define R_DMA_CH8_SUB2_EP__ep__BITNR 0 -#define R_DMA_CH8_SUB2_EP__ep__WIDTH 32 - -#define R_DMA_CH8_SUB2_CMD (IO_TYPECAST_BYTE 0xb00001db) -#define R_DMA_CH8_SUB2_CMD__cmd__BITNR 0 -#define R_DMA_CH8_SUB2_CMD__cmd__WIDTH 1 -#define R_DMA_CH8_SUB2_CMD__cmd__stop 0 -#define R_DMA_CH8_SUB2_CMD__cmd__start 1 - -#define R_DMA_CH8_SUB2_CLR_INTR (IO_TYPECAST_BYTE 0xb00001eb) -#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__dont 0 -#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__do 1 - -#define R_DMA_CH8_SUB3_EP (IO_TYPECAST_UDWORD 0xb00001fc) -#define R_DMA_CH8_SUB3_EP__ep__BITNR 0 -#define R_DMA_CH8_SUB3_EP__ep__WIDTH 32 - -#define R_DMA_CH8_SUB3_CMD (IO_TYPECAST_BYTE 0xb00001df) -#define R_DMA_CH8_SUB3_CMD__cmd__BITNR 0 -#define R_DMA_CH8_SUB3_CMD__cmd__WIDTH 1 -#define R_DMA_CH8_SUB3_CMD__cmd__stop 0 -#define R_DMA_CH8_SUB3_CMD__cmd__start 1 - -#define R_DMA_CH8_SUB3_CLR_INTR (IO_TYPECAST_BYTE 0xb00001ef) -#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__dont 0 -#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__do 1 - -#define R_DMA_CH9_HWSW (IO_TYPECAST_UDWORD 0xb0000190) -#define R_DMA_CH9_HWSW__hw__BITNR 16 -#define R_DMA_CH9_HWSW__hw__WIDTH 16 -#define R_DMA_CH9_HWSW__sw__BITNR 0 -#define R_DMA_CH9_HWSW__sw__WIDTH 16 - -#define R_DMA_CH9_DESCR (IO_TYPECAST_UDWORD 0xb000019c) -#define R_DMA_CH9_DESCR__descr__BITNR 0 -#define R_DMA_CH9_DESCR__descr__WIDTH 32 - -#define R_DMA_CH9_NEXT (IO_TYPECAST_UDWORD 0xb0000194) -#define R_DMA_CH9_NEXT__next__BITNR 0 -#define R_DMA_CH9_NEXT__next__WIDTH 32 - -#define R_DMA_CH9_BUF (IO_TYPECAST_UDWORD 0xb0000198) -#define R_DMA_CH9_BUF__buf__BITNR 0 -#define R_DMA_CH9_BUF__buf__WIDTH 32 - -#define R_DMA_CH9_FIRST (IO_TYPECAST_UDWORD 0xb00001c4) -#define R_DMA_CH9_FIRST__first__BITNR 0 -#define R_DMA_CH9_FIRST__first__WIDTH 32 - -#define R_DMA_CH9_CMD (IO_TYPECAST_BYTE 0xb00001f4) -#define R_DMA_CH9_CMD__cmd__BITNR 0 -#define R_DMA_CH9_CMD__cmd__WIDTH 3 -#define R_DMA_CH9_CMD__cmd__hold 0 -#define R_DMA_CH9_CMD__cmd__start 1 -#define R_DMA_CH9_CMD__cmd__restart 3 -#define R_DMA_CH9_CMD__cmd__continue 3 -#define R_DMA_CH9_CMD__cmd__reset 4 - -#define R_DMA_CH9_CLR_INTR (IO_TYPECAST_BYTE 0xb00001f5) -#define R_DMA_CH9_CLR_INTR__clr_eop__BITNR 1 -#define R_DMA_CH9_CLR_INTR__clr_eop__WIDTH 1 -#define R_DMA_CH9_CLR_INTR__clr_eop__do 1 -#define R_DMA_CH9_CLR_INTR__clr_eop__dont 0 -#define R_DMA_CH9_CLR_INTR__clr_descr__BITNR 0 -#define R_DMA_CH9_CLR_INTR__clr_descr__WIDTH 1 -#define R_DMA_CH9_CLR_INTR__clr_descr__do 1 -#define R_DMA_CH9_CLR_INTR__clr_descr__dont 0 - -#define R_DMA_CH9_STATUS (IO_TYPECAST_RO_BYTE 0xb00001f6) -#define R_DMA_CH9_STATUS__avail__BITNR 0 -#define R_DMA_CH9_STATUS__avail__WIDTH 7 - -/* -!* Test mode registers -!*/ - -#define R_TEST_MODE (IO_TYPECAST_UDWORD 0xb00000fc) -#define R_TEST_MODE__single_step__BITNR 19 -#define R_TEST_MODE__single_step__WIDTH 1 -#define R_TEST_MODE__single_step__on 1 -#define R_TEST_MODE__single_step__off 0 -#define R_TEST_MODE__step_wr__BITNR 18 -#define R_TEST_MODE__step_wr__WIDTH 1 -#define R_TEST_MODE__step_wr__on 1 -#define R_TEST_MODE__step_wr__off 0 -#define R_TEST_MODE__step_rd__BITNR 17 -#define R_TEST_MODE__step_rd__WIDTH 1 -#define R_TEST_MODE__step_rd__on 1 -#define R_TEST_MODE__step_rd__off 0 -#define R_TEST_MODE__step_fetch__BITNR 16 -#define R_TEST_MODE__step_fetch__WIDTH 1 -#define R_TEST_MODE__step_fetch__on 1 -#define R_TEST_MODE__step_fetch__off 0 -#define R_TEST_MODE__mmu_test__BITNR 12 -#define R_TEST_MODE__mmu_test__WIDTH 1 -#define R_TEST_MODE__mmu_test__on 1 -#define R_TEST_MODE__mmu_test__off 0 -#define R_TEST_MODE__usb_test__BITNR 11 -#define R_TEST_MODE__usb_test__WIDTH 1 -#define R_TEST_MODE__usb_test__on 1 -#define R_TEST_MODE__usb_test__off 0 -#define R_TEST_MODE__scsi_timer_test__BITNR 10 -#define R_TEST_MODE__scsi_timer_test__WIDTH 1 -#define R_TEST_MODE__scsi_timer_test__on 1 -#define R_TEST_MODE__scsi_timer_test__off 0 -#define R_TEST_MODE__backoff__BITNR 9 -#define R_TEST_MODE__backoff__WIDTH 1 -#define R_TEST_MODE__backoff__on 1 -#define R_TEST_MODE__backoff__off 0 -#define R_TEST_MODE__snmp_test__BITNR 8 -#define R_TEST_MODE__snmp_test__WIDTH 1 -#define R_TEST_MODE__snmp_test__on 1 -#define R_TEST_MODE__snmp_test__off 0 -#define R_TEST_MODE__snmp_inc__BITNR 7 -#define R_TEST_MODE__snmp_inc__WIDTH 1 -#define R_TEST_MODE__snmp_inc__do 1 -#define R_TEST_MODE__snmp_inc__dont 0 -#define R_TEST_MODE__ser_loop__BITNR 6 -#define R_TEST_MODE__ser_loop__WIDTH 1 -#define R_TEST_MODE__ser_loop__on 1 -#define R_TEST_MODE__ser_loop__off 0 -#define R_TEST_MODE__baudrate__BITNR 5 -#define R_TEST_MODE__baudrate__WIDTH 1 -#define R_TEST_MODE__baudrate__on 1 -#define R_TEST_MODE__baudrate__off 0 -#define R_TEST_MODE__timer__BITNR 3 -#define R_TEST_MODE__timer__WIDTH 2 -#define R_TEST_MODE__timer__off 0 -#define R_TEST_MODE__timer__even 1 -#define R_TEST_MODE__timer__odd 2 -#define R_TEST_MODE__timer__all 3 -#define R_TEST_MODE__cache_test__BITNR 2 -#define R_TEST_MODE__cache_test__WIDTH 1 -#define R_TEST_MODE__cache_test__normal 0 -#define R_TEST_MODE__cache_test__test 1 -#define R_TEST_MODE__tag_test__BITNR 1 -#define R_TEST_MODE__tag_test__WIDTH 1 -#define R_TEST_MODE__tag_test__normal 0 -#define R_TEST_MODE__tag_test__test 1 -#define R_TEST_MODE__cache_enable__BITNR 0 -#define R_TEST_MODE__cache_enable__WIDTH 1 -#define R_TEST_MODE__cache_enable__enable 1 -#define R_TEST_MODE__cache_enable__disable 0 - -#define R_SINGLE_STEP (IO_TYPECAST_BYTE 0xb00000fe) -#define R_SINGLE_STEP__single_step__BITNR 3 -#define R_SINGLE_STEP__single_step__WIDTH 1 -#define R_SINGLE_STEP__single_step__on 1 -#define R_SINGLE_STEP__single_step__off 0 -#define R_SINGLE_STEP__step_wr__BITNR 2 -#define R_SINGLE_STEP__step_wr__WIDTH 1 -#define R_SINGLE_STEP__step_wr__on 1 -#define R_SINGLE_STEP__step_wr__off 0 -#define R_SINGLE_STEP__step_rd__BITNR 1 -#define R_SINGLE_STEP__step_rd__WIDTH 1 -#define R_SINGLE_STEP__step_rd__on 1 -#define R_SINGLE_STEP__step_rd__off 0 -#define R_SINGLE_STEP__step_fetch__BITNR 0 -#define R_SINGLE_STEP__step_fetch__WIDTH 1 -#define R_SINGLE_STEP__step_fetch__on 1 -#define R_SINGLE_STEP__step_fetch__off 0 - -/* -!* USB interface control registers -!*/ - -#define R_USB_REVISION (IO_TYPECAST_RO_BYTE 0xb0000200) -#define R_USB_REVISION__major__BITNR 4 -#define R_USB_REVISION__major__WIDTH 4 -#define R_USB_REVISION__minor__BITNR 0 -#define R_USB_REVISION__minor__WIDTH 4 - -#define R_USB_COMMAND (IO_TYPECAST_BYTE 0xb0000201) -#define R_USB_COMMAND__port_sel__BITNR 6 -#define R_USB_COMMAND__port_sel__WIDTH 2 -#define R_USB_COMMAND__port_sel__nop 0 -#define R_USB_COMMAND__port_sel__port1 1 -#define R_USB_COMMAND__port_sel__port2 2 -#define R_USB_COMMAND__port_sel__both 3 -#define R_USB_COMMAND__port_cmd__BITNR 4 -#define R_USB_COMMAND__port_cmd__WIDTH 2 -#define R_USB_COMMAND__port_cmd__reset 0 -#define R_USB_COMMAND__port_cmd__disable 1 -#define R_USB_COMMAND__port_cmd__suspend 2 -#define R_USB_COMMAND__port_cmd__resume 3 -#define R_USB_COMMAND__busy__BITNR 3 -#define R_USB_COMMAND__busy__WIDTH 1 -#define R_USB_COMMAND__busy__no 0 -#define R_USB_COMMAND__busy__yes 1 -#define R_USB_COMMAND__ctrl_cmd__BITNR 0 -#define R_USB_COMMAND__ctrl_cmd__WIDTH 3 -#define R_USB_COMMAND__ctrl_cmd__nop 0 -#define R_USB_COMMAND__ctrl_cmd__reset 1 -#define R_USB_COMMAND__ctrl_cmd__deconfig 2 -#define R_USB_COMMAND__ctrl_cmd__host_config 3 -#define R_USB_COMMAND__ctrl_cmd__dev_config 4 -#define R_USB_COMMAND__ctrl_cmd__host_nop 5 -#define R_USB_COMMAND__ctrl_cmd__host_run 6 -#define R_USB_COMMAND__ctrl_cmd__host_stop 7 - -#define R_USB_COMMAND_DEV (IO_TYPECAST_BYTE 0xb0000201) -#define R_USB_COMMAND_DEV__port_sel__BITNR 6 -#define R_USB_COMMAND_DEV__port_sel__WIDTH 2 -#define R_USB_COMMAND_DEV__port_sel__nop 0 -#define R_USB_COMMAND_DEV__port_sel__dummy1 1 -#define R_USB_COMMAND_DEV__port_sel__dummy2 2 -#define R_USB_COMMAND_DEV__port_sel__any 3 -#define R_USB_COMMAND_DEV__port_cmd__BITNR 4 -#define R_USB_COMMAND_DEV__port_cmd__WIDTH 2 -#define R_USB_COMMAND_DEV__port_cmd__active 0 -#define R_USB_COMMAND_DEV__port_cmd__passive 1 -#define R_USB_COMMAND_DEV__port_cmd__nop 2 -#define R_USB_COMMAND_DEV__port_cmd__wakeup 3 -#define R_USB_COMMAND_DEV__busy__BITNR 3 -#define R_USB_COMMAND_DEV__busy__WIDTH 1 -#define R_USB_COMMAND_DEV__busy__no 0 -#define R_USB_COMMAND_DEV__busy__yes 1 -#define R_USB_COMMAND_DEV__ctrl_cmd__BITNR 0 -#define R_USB_COMMAND_DEV__ctrl_cmd__WIDTH 3 -#define R_USB_COMMAND_DEV__ctrl_cmd__nop 0 -#define R_USB_COMMAND_DEV__ctrl_cmd__reset 1 -#define R_USB_COMMAND_DEV__ctrl_cmd__deconfig 2 -#define R_USB_COMMAND_DEV__ctrl_cmd__host_config 3 -#define R_USB_COMMAND_DEV__ctrl_cmd__dev_config 4 -#define R_USB_COMMAND_DEV__ctrl_cmd__dev_active 5 -#define R_USB_COMMAND_DEV__ctrl_cmd__dev_passive 6 -#define R_USB_COMMAND_DEV__ctrl_cmd__dev_nop 7 - -#define R_USB_STATUS (IO_TYPECAST_RO_BYTE 0xb0000202) -#define R_USB_STATUS__ourun__BITNR 5 -#define R_USB_STATUS__ourun__WIDTH 1 -#define R_USB_STATUS__ourun__no 0 -#define R_USB_STATUS__ourun__yes 1 -#define R_USB_STATUS__perror__BITNR 4 -#define R_USB_STATUS__perror__WIDTH 1 -#define R_USB_STATUS__perror__no 0 -#define R_USB_STATUS__perror__yes 1 -#define R_USB_STATUS__device_mode__BITNR 3 -#define R_USB_STATUS__device_mode__WIDTH 1 -#define R_USB_STATUS__device_mode__no 0 -#define R_USB_STATUS__device_mode__yes 1 -#define R_USB_STATUS__host_mode__BITNR 2 -#define R_USB_STATUS__host_mode__WIDTH 1 -#define R_USB_STATUS__host_mode__no 0 -#define R_USB_STATUS__host_mode__yes 1 -#define R_USB_STATUS__started__BITNR 1 -#define R_USB_STATUS__started__WIDTH 1 -#define R_USB_STATUS__started__no 0 -#define R_USB_STATUS__started__yes 1 -#define R_USB_STATUS__running__BITNR 0 -#define R_USB_STATUS__running__WIDTH 1 -#define R_USB_STATUS__running__no 0 -#define R_USB_STATUS__running__yes 1 - -#define R_USB_IRQ_MASK_SET (IO_TYPECAST_UWORD 0xb0000204) -#define R_USB_IRQ_MASK_SET__iso_eof__BITNR 13 -#define R_USB_IRQ_MASK_SET__iso_eof__WIDTH 1 -#define R_USB_IRQ_MASK_SET__iso_eof__nop 0 -#define R_USB_IRQ_MASK_SET__iso_eof__set 1 -#define R_USB_IRQ_MASK_SET__intr_eof__BITNR 12 -#define R_USB_IRQ_MASK_SET__intr_eof__WIDTH 1 -#define R_USB_IRQ_MASK_SET__intr_eof__nop 0 -#define R_USB_IRQ_MASK_SET__intr_eof__set 1 -#define R_USB_IRQ_MASK_SET__iso_eot__BITNR 11 -#define R_USB_IRQ_MASK_SET__iso_eot__WIDTH 1 -#define R_USB_IRQ_MASK_SET__iso_eot__nop 0 -#define R_USB_IRQ_MASK_SET__iso_eot__set 1 -#define R_USB_IRQ_MASK_SET__intr_eot__BITNR 10 -#define R_USB_IRQ_MASK_SET__intr_eot__WIDTH 1 -#define R_USB_IRQ_MASK_SET__intr_eot__nop 0 -#define R_USB_IRQ_MASK_SET__intr_eot__set 1 -#define R_USB_IRQ_MASK_SET__ctl_eot__BITNR 9 -#define R_USB_IRQ_MASK_SET__ctl_eot__WIDTH 1 -#define R_USB_IRQ_MASK_SET__ctl_eot__nop 0 -#define R_USB_IRQ_MASK_SET__ctl_eot__set 1 -#define R_USB_IRQ_MASK_SET__bulk_eot__BITNR 8 -#define R_USB_IRQ_MASK_SET__bulk_eot__WIDTH 1 -#define R_USB_IRQ_MASK_SET__bulk_eot__nop 0 -#define R_USB_IRQ_MASK_SET__bulk_eot__set 1 -#define R_USB_IRQ_MASK_SET__epid_attn__BITNR 3 -#define R_USB_IRQ_MASK_SET__epid_attn__WIDTH 1 -#define R_USB_IRQ_MASK_SET__epid_attn__nop 0 -#define R_USB_IRQ_MASK_SET__epid_attn__set 1 -#define R_USB_IRQ_MASK_SET__sof__BITNR 2 -#define R_USB_IRQ_MASK_SET__sof__WIDTH 1 -#define R_USB_IRQ_MASK_SET__sof__nop 0 -#define R_USB_IRQ_MASK_SET__sof__set 1 -#define R_USB_IRQ_MASK_SET__port_status__BITNR 1 -#define R_USB_IRQ_MASK_SET__port_status__WIDTH 1 -#define R_USB_IRQ_MASK_SET__port_status__nop 0 -#define R_USB_IRQ_MASK_SET__port_status__set 1 -#define R_USB_IRQ_MASK_SET__ctl_status__BITNR 0 -#define R_USB_IRQ_MASK_SET__ctl_status__WIDTH 1 -#define R_USB_IRQ_MASK_SET__ctl_status__nop 0 -#define R_USB_IRQ_MASK_SET__ctl_status__set 1 - -#define R_USB_IRQ_MASK_READ (IO_TYPECAST_RO_UWORD 0xb0000204) -#define R_USB_IRQ_MASK_READ__iso_eof__BITNR 13 -#define R_USB_IRQ_MASK_READ__iso_eof__WIDTH 1 -#define R_USB_IRQ_MASK_READ__iso_eof__no_pend 0 -#define R_USB_IRQ_MASK_READ__iso_eof__pend 1 -#define R_USB_IRQ_MASK_READ__intr_eof__BITNR 12 -#define R_USB_IRQ_MASK_READ__intr_eof__WIDTH 1 -#define R_USB_IRQ_MASK_READ__intr_eof__no_pend 0 -#define R_USB_IRQ_MASK_READ__intr_eof__pend 1 -#define R_USB_IRQ_MASK_READ__iso_eot__BITNR 11 -#define R_USB_IRQ_MASK_READ__iso_eot__WIDTH 1 -#define R_USB_IRQ_MASK_READ__iso_eot__no_pend 0 -#define R_USB_IRQ_MASK_READ__iso_eot__pend 1 -#define R_USB_IRQ_MASK_READ__intr_eot__BITNR 10 -#define R_USB_IRQ_MASK_READ__intr_eot__WIDTH 1 -#define R_USB_IRQ_MASK_READ__intr_eot__no_pend 0 -#define R_USB_IRQ_MASK_READ__intr_eot__pend 1 -#define R_USB_IRQ_MASK_READ__ctl_eot__BITNR 9 -#define R_USB_IRQ_MASK_READ__ctl_eot__WIDTH 1 -#define R_USB_IRQ_MASK_READ__ctl_eot__no_pend 0 -#define R_USB_IRQ_MASK_READ__ctl_eot__pend 1 -#define R_USB_IRQ_MASK_READ__bulk_eot__BITNR 8 -#define R_USB_IRQ_MASK_READ__bulk_eot__WIDTH 1 -#define R_USB_IRQ_MASK_READ__bulk_eot__no_pend 0 -#define R_USB_IRQ_MASK_READ__bulk_eot__pend 1 -#define R_USB_IRQ_MASK_READ__epid_attn__BITNR 3 -#define R_USB_IRQ_MASK_READ__epid_attn__WIDTH 1 -#define R_USB_IRQ_MASK_READ__epid_attn__no_pend 0 -#define R_USB_IRQ_MASK_READ__epid_attn__pend 1 -#define R_USB_IRQ_MASK_READ__sof__BITNR 2 -#define R_USB_IRQ_MASK_READ__sof__WIDTH 1 -#define R_USB_IRQ_MASK_READ__sof__no_pend 0 -#define R_USB_IRQ_MASK_READ__sof__pend 1 -#define R_USB_IRQ_MASK_READ__port_status__BITNR 1 -#define R_USB_IRQ_MASK_READ__port_status__WIDTH 1 -#define R_USB_IRQ_MASK_READ__port_status__no_pend 0 -#define R_USB_IRQ_MASK_READ__port_status__pend 1 -#define R_USB_IRQ_MASK_READ__ctl_status__BITNR 0 -#define R_USB_IRQ_MASK_READ__ctl_status__WIDTH 1 -#define R_USB_IRQ_MASK_READ__ctl_status__no_pend 0 -#define R_USB_IRQ_MASK_READ__ctl_status__pend 1 - -#define R_USB_IRQ_MASK_CLR (IO_TYPECAST_UWORD 0xb0000206) -#define R_USB_IRQ_MASK_CLR__iso_eof__BITNR 13 -#define R_USB_IRQ_MASK_CLR__iso_eof__WIDTH 1 -#define R_USB_IRQ_MASK_CLR__iso_eof__nop 0 -#define R_USB_IRQ_MASK_CLR__iso_eof__clr 1 -#define R_USB_IRQ_MASK_CLR__intr_eof__BITNR 12 -#define R_USB_IRQ_MASK_CLR__intr_eof__WIDTH 1 -#define R_USB_IRQ_MASK_CLR__intr_eof__nop 0 -#define R_USB_IRQ_MASK_CLR__intr_eof__clr 1 -#define R_USB_IRQ_MASK_CLR__iso_eot__BITNR 11 -#define R_USB_IRQ_MASK_CLR__iso_eot__WIDTH 1 -#define R_USB_IRQ_MASK_CLR__iso_eot__nop 0 -#define R_USB_IRQ_MASK_CLR__iso_eot__clr 1 -#define R_USB_IRQ_MASK_CLR__intr_eot__BITNR 10 -#define R_USB_IRQ_MASK_CLR__intr_eot__WIDTH 1 -#define R_USB_IRQ_MASK_CLR__intr_eot__nop 0 -#define R_USB_IRQ_MASK_CLR__intr_eot__clr 1 -#define R_USB_IRQ_MASK_CLR__ctl_eot__BITNR 9 -#define R_USB_IRQ_MASK_CLR__ctl_eot__WIDTH 1 -#define R_USB_IRQ_MASK_CLR__ctl_eot__nop 0 -#define R_USB_IRQ_MASK_CLR__ctl_eot__clr 1 -#define R_USB_IRQ_MASK_CLR__bulk_eot__BITNR 8 -#define R_USB_IRQ_MASK_CLR__bulk_eot__WIDTH 1 -#define R_USB_IRQ_MASK_CLR__bulk_eot__nop 0 -#define R_USB_IRQ_MASK_CLR__bulk_eot__clr 1 -#define R_USB_IRQ_MASK_CLR__epid_attn__BITNR 3 -#define R_USB_IRQ_MASK_CLR__epid_attn__WIDTH 1 -#define R_USB_IRQ_MASK_CLR__epid_attn__nop 0 -#define R_USB_IRQ_MASK_CLR__epid_attn__clr 1 -#define R_USB_IRQ_MASK_CLR__sof__BITNR 2 -#define R_USB_IRQ_MASK_CLR__sof__WIDTH 1 -#define R_USB_IRQ_MASK_CLR__sof__nop 0 -#define R_USB_IRQ_MASK_CLR__sof__clr 1 -#define R_USB_IRQ_MASK_CLR__port_status__BITNR 1 -#define R_USB_IRQ_MASK_CLR__port_status__WIDTH 1 -#define R_USB_IRQ_MASK_CLR__port_status__nop 0 -#define R_USB_IRQ_MASK_CLR__port_status__clr 1 -#define R_USB_IRQ_MASK_CLR__ctl_status__BITNR 0 -#define R_USB_IRQ_MASK_CLR__ctl_status__WIDTH 1 -#define R_USB_IRQ_MASK_CLR__ctl_status__nop 0 -#define R_USB_IRQ_MASK_CLR__ctl_status__clr 1 - -#define R_USB_IRQ_READ (IO_TYPECAST_RO_UWORD 0xb0000206) -#define R_USB_IRQ_READ__iso_eof__BITNR 13 -#define R_USB_IRQ_READ__iso_eof__WIDTH 1 -#define R_USB_IRQ_READ__iso_eof__no_pend 0 -#define R_USB_IRQ_READ__iso_eof__pend 1 -#define R_USB_IRQ_READ__intr_eof__BITNR 12 -#define R_USB_IRQ_READ__intr_eof__WIDTH 1 -#define R_USB_IRQ_READ__intr_eof__no_pend 0 -#define R_USB_IRQ_READ__intr_eof__pend 1 -#define R_USB_IRQ_READ__iso_eot__BITNR 11 -#define R_USB_IRQ_READ__iso_eot__WIDTH 1 -#define R_USB_IRQ_READ__iso_eot__no_pend 0 -#define R_USB_IRQ_READ__iso_eot__pend 1 -#define R_USB_IRQ_READ__intr_eot__BITNR 10 -#define R_USB_IRQ_READ__intr_eot__WIDTH 1 -#define R_USB_IRQ_READ__intr_eot__no_pend 0 -#define R_USB_IRQ_READ__intr_eot__pend 1 -#define R_USB_IRQ_READ__ctl_eot__BITNR 9 -#define R_USB_IRQ_READ__ctl_eot__WIDTH 1 -#define R_USB_IRQ_READ__ctl_eot__no_pend 0 -#define R_USB_IRQ_READ__ctl_eot__pend 1 -#define R_USB_IRQ_READ__bulk_eot__BITNR 8 -#define R_USB_IRQ_READ__bulk_eot__WIDTH 1 -#define R_USB_IRQ_READ__bulk_eot__no_pend 0 -#define R_USB_IRQ_READ__bulk_eot__pend 1 -#define R_USB_IRQ_READ__epid_attn__BITNR 3 -#define R_USB_IRQ_READ__epid_attn__WIDTH 1 -#define R_USB_IRQ_READ__epid_attn__no_pend 0 -#define R_USB_IRQ_READ__epid_attn__pend 1 -#define R_USB_IRQ_READ__sof__BITNR 2 -#define R_USB_IRQ_READ__sof__WIDTH 1 -#define R_USB_IRQ_READ__sof__no_pend 0 -#define R_USB_IRQ_READ__sof__pend 1 -#define R_USB_IRQ_READ__port_status__BITNR 1 -#define R_USB_IRQ_READ__port_status__WIDTH 1 -#define R_USB_IRQ_READ__port_status__no_pend 0 -#define R_USB_IRQ_READ__port_status__pend 1 -#define R_USB_IRQ_READ__ctl_status__BITNR 0 -#define R_USB_IRQ_READ__ctl_status__WIDTH 1 -#define R_USB_IRQ_READ__ctl_status__no_pend 0 -#define R_USB_IRQ_READ__ctl_status__pend 1 - -#define R_USB_IRQ_MASK_SET_DEV (IO_TYPECAST_UWORD 0xb0000204) -#define R_USB_IRQ_MASK_SET_DEV__out_eot__BITNR 12 -#define R_USB_IRQ_MASK_SET_DEV__out_eot__WIDTH 1 -#define R_USB_IRQ_MASK_SET_DEV__out_eot__nop 0 -#define R_USB_IRQ_MASK_SET_DEV__out_eot__set 1 -#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__BITNR 11 -#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__nop 0 -#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__set 1 -#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__BITNR 10 -#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__nop 0 -#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__set 1 -#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__BITNR 9 -#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__nop 0 -#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__set 1 -#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__BITNR 8 -#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__nop 0 -#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__set 1 -#define R_USB_IRQ_MASK_SET_DEV__epid_attn__BITNR 3 -#define R_USB_IRQ_MASK_SET_DEV__epid_attn__WIDTH 1 -#define R_USB_IRQ_MASK_SET_DEV__epid_attn__nop 0 -#define R_USB_IRQ_MASK_SET_DEV__epid_attn__set 1 -#define R_USB_IRQ_MASK_SET_DEV__sof__BITNR 2 -#define R_USB_IRQ_MASK_SET_DEV__sof__WIDTH 1 -#define R_USB_IRQ_MASK_SET_DEV__sof__nop 0 -#define R_USB_IRQ_MASK_SET_DEV__sof__set 1 -#define R_USB_IRQ_MASK_SET_DEV__port_status__BITNR 1 -#define R_USB_IRQ_MASK_SET_DEV__port_status__WIDTH 1 -#define R_USB_IRQ_MASK_SET_DEV__port_status__nop 0 -#define R_USB_IRQ_MASK_SET_DEV__port_status__set 1 -#define R_USB_IRQ_MASK_SET_DEV__ctl_status__BITNR 0 -#define R_USB_IRQ_MASK_SET_DEV__ctl_status__WIDTH 1 -#define R_USB_IRQ_MASK_SET_DEV__ctl_status__nop 0 -#define R_USB_IRQ_MASK_SET_DEV__ctl_status__set 1 - -#define R_USB_IRQ_MASK_READ_DEV (IO_TYPECAST_RO_UWORD 0xb0000204) -#define R_USB_IRQ_MASK_READ_DEV__out_eot__BITNR 12 -#define R_USB_IRQ_MASK_READ_DEV__out_eot__WIDTH 1 -#define R_USB_IRQ_MASK_READ_DEV__out_eot__no_pend 0 -#define R_USB_IRQ_MASK_READ_DEV__out_eot__pend 1 -#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__BITNR 11 -#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__no_pend 0 -#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__pend 1 -#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__BITNR 10 -#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__no_pend 0 -#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__pend 1 -#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__BITNR 9 -#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__no_pend 0 -#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__pend 1 -#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__BITNR 8 -#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__no_pend 0 -#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__pend 1 -#define R_USB_IRQ_MASK_READ_DEV__epid_attn__BITNR 3 -#define R_USB_IRQ_MASK_READ_DEV__epid_attn__WIDTH 1 -#define R_USB_IRQ_MASK_READ_DEV__epid_attn__no_pend 0 -#define R_USB_IRQ_MASK_READ_DEV__epid_attn__pend 1 -#define R_USB_IRQ_MASK_READ_DEV__sof__BITNR 2 -#define R_USB_IRQ_MASK_READ_DEV__sof__WIDTH 1 -#define R_USB_IRQ_MASK_READ_DEV__sof__no_pend 0 -#define R_USB_IRQ_MASK_READ_DEV__sof__pend 1 -#define R_USB_IRQ_MASK_READ_DEV__port_status__BITNR 1 -#define R_USB_IRQ_MASK_READ_DEV__port_status__WIDTH 1 -#define R_USB_IRQ_MASK_READ_DEV__port_status__no_pend 0 -#define R_USB_IRQ_MASK_READ_DEV__port_status__pend 1 -#define R_USB_IRQ_MASK_READ_DEV__ctl_status__BITNR 0 -#define R_USB_IRQ_MASK_READ_DEV__ctl_status__WIDTH 1 -#define R_USB_IRQ_MASK_READ_DEV__ctl_status__no_pend 0 -#define R_USB_IRQ_MASK_READ_DEV__ctl_status__pend 1 - -#define R_USB_IRQ_MASK_CLR_DEV (IO_TYPECAST_UWORD 0xb0000206) -#define R_USB_IRQ_MASK_CLR_DEV__out_eot__BITNR 12 -#define R_USB_IRQ_MASK_CLR_DEV__out_eot__WIDTH 1 -#define R_USB_IRQ_MASK_CLR_DEV__out_eot__nop 0 -#define R_USB_IRQ_MASK_CLR_DEV__out_eot__clr 1 -#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__BITNR 11 -#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__nop 0 -#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__clr 1 -#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__BITNR 10 -#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__nop 0 -#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__clr 1 -#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__BITNR 9 -#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__nop 0 -#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__clr 1 -#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__BITNR 8 -#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__WIDTH 1 -#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__nop 0 -#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__clr 1 -#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__BITNR 3 -#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__WIDTH 1 -#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__nop 0 -#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__clr 1 -#define R_USB_IRQ_MASK_CLR_DEV__sof__BITNR 2 -#define R_USB_IRQ_MASK_CLR_DEV__sof__WIDTH 1 -#define R_USB_IRQ_MASK_CLR_DEV__sof__nop 0 -#define R_USB_IRQ_MASK_CLR_DEV__sof__clr 1 -#define R_USB_IRQ_MASK_CLR_DEV__port_status__BITNR 1 -#define R_USB_IRQ_MASK_CLR_DEV__port_status__WIDTH 1 -#define R_USB_IRQ_MASK_CLR_DEV__port_status__nop 0 -#define R_USB_IRQ_MASK_CLR_DEV__port_status__clr 1 -#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__BITNR 0 -#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__WIDTH 1 -#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__nop 0 -#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__clr 1 - -#define R_USB_IRQ_READ_DEV (IO_TYPECAST_RO_UWORD 0xb0000206) -#define R_USB_IRQ_READ_DEV__out_eot__BITNR 12 -#define R_USB_IRQ_READ_DEV__out_eot__WIDTH 1 -#define R_USB_IRQ_READ_DEV__out_eot__no_pend 0 -#define R_USB_IRQ_READ_DEV__out_eot__pend 1 -#define R_USB_IRQ_READ_DEV__ep3_in_eot__BITNR 11 -#define R_USB_IRQ_READ_DEV__ep3_in_eot__WIDTH 1 -#define R_USB_IRQ_READ_DEV__ep3_in_eot__no_pend 0 -#define R_USB_IRQ_READ_DEV__ep3_in_eot__pend 1 -#define R_USB_IRQ_READ_DEV__ep2_in_eot__BITNR 10 -#define R_USB_IRQ_READ_DEV__ep2_in_eot__WIDTH 1 -#define R_USB_IRQ_READ_DEV__ep2_in_eot__no_pend 0 -#define R_USB_IRQ_READ_DEV__ep2_in_eot__pend 1 -#define R_USB_IRQ_READ_DEV__ep1_in_eot__BITNR 9 -#define R_USB_IRQ_READ_DEV__ep1_in_eot__WIDTH 1 -#define R_USB_IRQ_READ_DEV__ep1_in_eot__no_pend 0 -#define R_USB_IRQ_READ_DEV__ep1_in_eot__pend 1 -#define R_USB_IRQ_READ_DEV__ep0_in_eot__BITNR 8 -#define R_USB_IRQ_READ_DEV__ep0_in_eot__WIDTH 1 -#define R_USB_IRQ_READ_DEV__ep0_in_eot__no_pend 0 -#define R_USB_IRQ_READ_DEV__ep0_in_eot__pend 1 -#define R_USB_IRQ_READ_DEV__epid_attn__BITNR 3 -#define R_USB_IRQ_READ_DEV__epid_attn__WIDTH 1 -#define R_USB_IRQ_READ_DEV__epid_attn__no_pend 0 -#define R_USB_IRQ_READ_DEV__epid_attn__pend 1 -#define R_USB_IRQ_READ_DEV__sof__BITNR 2 -#define R_USB_IRQ_READ_DEV__sof__WIDTH 1 -#define R_USB_IRQ_READ_DEV__sof__no_pend 0 -#define R_USB_IRQ_READ_DEV__sof__pend 1 -#define R_USB_IRQ_READ_DEV__port_status__BITNR 1 -#define R_USB_IRQ_READ_DEV__port_status__WIDTH 1 -#define R_USB_IRQ_READ_DEV__port_status__no_pend 0 -#define R_USB_IRQ_READ_DEV__port_status__pend 1 -#define R_USB_IRQ_READ_DEV__ctl_status__BITNR 0 -#define R_USB_IRQ_READ_DEV__ctl_status__WIDTH 1 -#define R_USB_IRQ_READ_DEV__ctl_status__no_pend 0 -#define R_USB_IRQ_READ_DEV__ctl_status__pend 1 - -#define R_USB_FM_NUMBER (IO_TYPECAST_UDWORD 0xb000020c) -#define R_USB_FM_NUMBER__value__BITNR 0 -#define R_USB_FM_NUMBER__value__WIDTH 32 - -#define R_USB_FM_INTERVAL (IO_TYPECAST_UWORD 0xb0000210) -#define R_USB_FM_INTERVAL__fixed__BITNR 6 -#define R_USB_FM_INTERVAL__fixed__WIDTH 8 -#define R_USB_FM_INTERVAL__adj__BITNR 0 -#define R_USB_FM_INTERVAL__adj__WIDTH 6 - -#define R_USB_FM_REMAINING (IO_TYPECAST_RO_UWORD 0xb0000212) -#define R_USB_FM_REMAINING__value__BITNR 0 -#define R_USB_FM_REMAINING__value__WIDTH 14 - -#define R_USB_FM_PSTART (IO_TYPECAST_UWORD 0xb0000214) -#define R_USB_FM_PSTART__value__BITNR 0 -#define R_USB_FM_PSTART__value__WIDTH 14 - -#define R_USB_RH_STATUS (IO_TYPECAST_RO_BYTE 0xb0000203) -#define R_USB_RH_STATUS__babble2__BITNR 7 -#define R_USB_RH_STATUS__babble2__WIDTH 1 -#define R_USB_RH_STATUS__babble2__no 0 -#define R_USB_RH_STATUS__babble2__yes 1 -#define R_USB_RH_STATUS__babble1__BITNR 6 -#define R_USB_RH_STATUS__babble1__WIDTH 1 -#define R_USB_RH_STATUS__babble1__no 0 -#define R_USB_RH_STATUS__babble1__yes 1 -#define R_USB_RH_STATUS__bus1__BITNR 4 -#define R_USB_RH_STATUS__bus1__WIDTH 2 -#define R_USB_RH_STATUS__bus1__SE0 0 -#define R_USB_RH_STATUS__bus1__Diff0 1 -#define R_USB_RH_STATUS__bus1__Diff1 2 -#define R_USB_RH_STATUS__bus1__SE1 3 -#define R_USB_RH_STATUS__bus2__BITNR 2 -#define R_USB_RH_STATUS__bus2__WIDTH 2 -#define R_USB_RH_STATUS__bus2__SE0 0 -#define R_USB_RH_STATUS__bus2__Diff0 1 -#define R_USB_RH_STATUS__bus2__Diff1 2 -#define R_USB_RH_STATUS__bus2__SE1 3 -#define R_USB_RH_STATUS__nports__BITNR 0 -#define R_USB_RH_STATUS__nports__WIDTH 2 - -#define R_USB_RH_PORT_STATUS_1 (IO_TYPECAST_RO_UWORD 0xb0000218) -#define R_USB_RH_PORT_STATUS_1__speed__BITNR 9 -#define R_USB_RH_PORT_STATUS_1__speed__WIDTH 1 -#define R_USB_RH_PORT_STATUS_1__speed__full 0 -#define R_USB_RH_PORT_STATUS_1__speed__low 1 -#define R_USB_RH_PORT_STATUS_1__power__BITNR 8 -#define R_USB_RH_PORT_STATUS_1__power__WIDTH 1 -#define R_USB_RH_PORT_STATUS_1__reset__BITNR 4 -#define R_USB_RH_PORT_STATUS_1__reset__WIDTH 1 -#define R_USB_RH_PORT_STATUS_1__reset__no 0 -#define R_USB_RH_PORT_STATUS_1__reset__yes 1 -#define R_USB_RH_PORT_STATUS_1__overcurrent__BITNR 3 -#define R_USB_RH_PORT_STATUS_1__overcurrent__WIDTH 1 -#define R_USB_RH_PORT_STATUS_1__overcurrent__no 0 -#define R_USB_RH_PORT_STATUS_1__overcurrent__yes 1 -#define R_USB_RH_PORT_STATUS_1__suspended__BITNR 2 -#define R_USB_RH_PORT_STATUS_1__suspended__WIDTH 1 -#define R_USB_RH_PORT_STATUS_1__suspended__no 0 -#define R_USB_RH_PORT_STATUS_1__suspended__yes 1 -#define R_USB_RH_PORT_STATUS_1__enabled__BITNR 1 -#define R_USB_RH_PORT_STATUS_1__enabled__WIDTH 1 -#define R_USB_RH_PORT_STATUS_1__enabled__no 0 -#define R_USB_RH_PORT_STATUS_1__enabled__yes 1 -#define R_USB_RH_PORT_STATUS_1__connected__BITNR 0 -#define R_USB_RH_PORT_STATUS_1__connected__WIDTH 1 -#define R_USB_RH_PORT_STATUS_1__connected__no 0 -#define R_USB_RH_PORT_STATUS_1__connected__yes 1 - -#define R_USB_RH_PORT_STATUS_2 (IO_TYPECAST_RO_UWORD 0xb000021a) -#define R_USB_RH_PORT_STATUS_2__speed__BITNR 9 -#define R_USB_RH_PORT_STATUS_2__speed__WIDTH 1 -#define R_USB_RH_PORT_STATUS_2__speed__full 0 -#define R_USB_RH_PORT_STATUS_2__speed__low 1 -#define R_USB_RH_PORT_STATUS_2__power__BITNR 8 -#define R_USB_RH_PORT_STATUS_2__power__WIDTH 1 -#define R_USB_RH_PORT_STATUS_2__reset__BITNR 4 -#define R_USB_RH_PORT_STATUS_2__reset__WIDTH 1 -#define R_USB_RH_PORT_STATUS_2__reset__no 0 -#define R_USB_RH_PORT_STATUS_2__reset__yes 1 -#define R_USB_RH_PORT_STATUS_2__overcurrent__BITNR 3 -#define R_USB_RH_PORT_STATUS_2__overcurrent__WIDTH 1 -#define R_USB_RH_PORT_STATUS_2__overcurrent__no 0 -#define R_USB_RH_PORT_STATUS_2__overcurrent__yes 1 -#define R_USB_RH_PORT_STATUS_2__suspended__BITNR 2 -#define R_USB_RH_PORT_STATUS_2__suspended__WIDTH 1 -#define R_USB_RH_PORT_STATUS_2__suspended__no 0 -#define R_USB_RH_PORT_STATUS_2__suspended__yes 1 -#define R_USB_RH_PORT_STATUS_2__enabled__BITNR 1 -#define R_USB_RH_PORT_STATUS_2__enabled__WIDTH 1 -#define R_USB_RH_PORT_STATUS_2__enabled__no 0 -#define R_USB_RH_PORT_STATUS_2__enabled__yes 1 -#define R_USB_RH_PORT_STATUS_2__connected__BITNR 0 -#define R_USB_RH_PORT_STATUS_2__connected__WIDTH 1 -#define R_USB_RH_PORT_STATUS_2__connected__no 0 -#define R_USB_RH_PORT_STATUS_2__connected__yes 1 - -#define R_USB_EPT_INDEX (IO_TYPECAST_BYTE 0xb0000208) -#define R_USB_EPT_INDEX__value__BITNR 0 -#define R_USB_EPT_INDEX__value__WIDTH 5 - -#define R_USB_EPT_DATA (IO_TYPECAST_UDWORD 0xb000021c) -#define R_USB_EPT_DATA__valid__BITNR 31 -#define R_USB_EPT_DATA__valid__WIDTH 1 -#define R_USB_EPT_DATA__valid__no 0 -#define R_USB_EPT_DATA__valid__yes 1 -#define R_USB_EPT_DATA__hold__BITNR 30 -#define R_USB_EPT_DATA__hold__WIDTH 1 -#define R_USB_EPT_DATA__hold__no 0 -#define R_USB_EPT_DATA__hold__yes 1 -#define R_USB_EPT_DATA__error_count_in__BITNR 28 -#define R_USB_EPT_DATA__error_count_in__WIDTH 2 -#define R_USB_EPT_DATA__t_in__BITNR 27 -#define R_USB_EPT_DATA__t_in__WIDTH 1 -#define R_USB_EPT_DATA__low_speed__BITNR 26 -#define R_USB_EPT_DATA__low_speed__WIDTH 1 -#define R_USB_EPT_DATA__low_speed__no 0 -#define R_USB_EPT_DATA__low_speed__yes 1 -#define R_USB_EPT_DATA__port__BITNR 24 -#define R_USB_EPT_DATA__port__WIDTH 2 -#define R_USB_EPT_DATA__port__any 0 -#define R_USB_EPT_DATA__port__p1 1 -#define R_USB_EPT_DATA__port__p2 2 -#define R_USB_EPT_DATA__port__undef 3 -#define R_USB_EPT_DATA__error_code__BITNR 22 -#define R_USB_EPT_DATA__error_code__WIDTH 2 -#define R_USB_EPT_DATA__error_code__no_error 0 -#define R_USB_EPT_DATA__error_code__stall 1 -#define R_USB_EPT_DATA__error_code__bus_error 2 -#define R_USB_EPT_DATA__error_code__buffer_error 3 -#define R_USB_EPT_DATA__t_out__BITNR 21 -#define R_USB_EPT_DATA__t_out__WIDTH 1 -#define R_USB_EPT_DATA__error_count_out__BITNR 19 -#define R_USB_EPT_DATA__error_count_out__WIDTH 2 -#define R_USB_EPT_DATA__max_len__BITNR 11 -#define R_USB_EPT_DATA__max_len__WIDTH 7 -#define R_USB_EPT_DATA__ep__BITNR 7 -#define R_USB_EPT_DATA__ep__WIDTH 4 -#define R_USB_EPT_DATA__dev__BITNR 0 -#define R_USB_EPT_DATA__dev__WIDTH 7 - -#define R_USB_EPT_DATA_ISO (IO_TYPECAST_UDWORD 0xb000021c) -#define R_USB_EPT_DATA_ISO__valid__BITNR 31 -#define R_USB_EPT_DATA_ISO__valid__WIDTH 1 -#define R_USB_EPT_DATA_ISO__valid__no 0 -#define R_USB_EPT_DATA_ISO__valid__yes 1 -#define R_USB_EPT_DATA_ISO__port__BITNR 24 -#define R_USB_EPT_DATA_ISO__port__WIDTH 2 -#define R_USB_EPT_DATA_ISO__port__any 0 -#define R_USB_EPT_DATA_ISO__port__p1 1 -#define R_USB_EPT_DATA_ISO__port__p2 2 -#define R_USB_EPT_DATA_ISO__port__undef 3 -#define R_USB_EPT_DATA_ISO__error_code__BITNR 22 -#define R_USB_EPT_DATA_ISO__error_code__WIDTH 2 -#define R_USB_EPT_DATA_ISO__error_code__no_error 0 -#define R_USB_EPT_DATA_ISO__error_code__stall 1 -#define R_USB_EPT_DATA_ISO__error_code__bus_error 2 -#define R_USB_EPT_DATA_ISO__error_code__TBD3 3 -#define R_USB_EPT_DATA_ISO__max_len__BITNR 11 -#define R_USB_EPT_DATA_ISO__max_len__WIDTH 10 -#define R_USB_EPT_DATA_ISO__ep__BITNR 7 -#define R_USB_EPT_DATA_ISO__ep__WIDTH 4 -#define R_USB_EPT_DATA_ISO__dev__BITNR 0 -#define R_USB_EPT_DATA_ISO__dev__WIDTH 7 - -#define R_USB_EPT_DATA_DEV (IO_TYPECAST_UDWORD 0xb000021c) -#define R_USB_EPT_DATA_DEV__valid__BITNR 31 -#define R_USB_EPT_DATA_DEV__valid__WIDTH 1 -#define R_USB_EPT_DATA_DEV__valid__no 0 -#define R_USB_EPT_DATA_DEV__valid__yes 1 -#define R_USB_EPT_DATA_DEV__hold__BITNR 30 -#define R_USB_EPT_DATA_DEV__hold__WIDTH 1 -#define R_USB_EPT_DATA_DEV__hold__no 0 -#define R_USB_EPT_DATA_DEV__hold__yes 1 -#define R_USB_EPT_DATA_DEV__stall__BITNR 29 -#define R_USB_EPT_DATA_DEV__stall__WIDTH 1 -#define R_USB_EPT_DATA_DEV__stall__no 0 -#define R_USB_EPT_DATA_DEV__stall__yes 1 -#define R_USB_EPT_DATA_DEV__iso_resp__BITNR 28 -#define R_USB_EPT_DATA_DEV__iso_resp__WIDTH 1 -#define R_USB_EPT_DATA_DEV__iso_resp__quiet 0 -#define R_USB_EPT_DATA_DEV__iso_resp__yes 1 -#define R_USB_EPT_DATA_DEV__ctrl__BITNR 27 -#define R_USB_EPT_DATA_DEV__ctrl__WIDTH 1 -#define R_USB_EPT_DATA_DEV__ctrl__no 0 -#define R_USB_EPT_DATA_DEV__ctrl__yes 1 -#define R_USB_EPT_DATA_DEV__iso__BITNR 26 -#define R_USB_EPT_DATA_DEV__iso__WIDTH 1 -#define R_USB_EPT_DATA_DEV__iso__no 0 -#define R_USB_EPT_DATA_DEV__iso__yes 1 -#define R_USB_EPT_DATA_DEV__port__BITNR 24 -#define R_USB_EPT_DATA_DEV__port__WIDTH 2 -#define R_USB_EPT_DATA_DEV__control_phase__BITNR 22 -#define R_USB_EPT_DATA_DEV__control_phase__WIDTH 1 -#define R_USB_EPT_DATA_DEV__t__BITNR 21 -#define R_USB_EPT_DATA_DEV__t__WIDTH 1 -#define R_USB_EPT_DATA_DEV__max_len__BITNR 11 -#define R_USB_EPT_DATA_DEV__max_len__WIDTH 10 -#define R_USB_EPT_DATA_DEV__ep__BITNR 7 -#define R_USB_EPT_DATA_DEV__ep__WIDTH 4 -#define R_USB_EPT_DATA_DEV__dev__BITNR 0 -#define R_USB_EPT_DATA_DEV__dev__WIDTH 7 - -#define R_USB_SNMP_TERROR (IO_TYPECAST_UDWORD 0xb0000220) -#define R_USB_SNMP_TERROR__value__BITNR 0 -#define R_USB_SNMP_TERROR__value__WIDTH 32 - -#define R_USB_EPID_ATTN (IO_TYPECAST_RO_UDWORD 0xb0000224) -#define R_USB_EPID_ATTN__value__BITNR 0 -#define R_USB_EPID_ATTN__value__WIDTH 32 - -#define R_USB_PORT1_DISABLE (IO_TYPECAST_BYTE 0xb000006a) -#define R_USB_PORT1_DISABLE__disable__BITNR 0 -#define R_USB_PORT1_DISABLE__disable__WIDTH 1 -#define R_USB_PORT1_DISABLE__disable__yes 0 -#define R_USB_PORT1_DISABLE__disable__no 1 - -#define R_USB_PORT2_DISABLE (IO_TYPECAST_BYTE 0xb0000052) -#define R_USB_PORT2_DISABLE__disable__BITNR 0 -#define R_USB_PORT2_DISABLE__disable__WIDTH 1 -#define R_USB_PORT2_DISABLE__disable__yes 0 -#define R_USB_PORT2_DISABLE__disable__no 1 - -/* -!* MMU registers -!*/ - -#define R_MMU_CONFIG (IO_TYPECAST_UDWORD 0xb0000240) -#define R_MMU_CONFIG__mmu_enable__BITNR 31 -#define R_MMU_CONFIG__mmu_enable__WIDTH 1 -#define R_MMU_CONFIG__mmu_enable__enable 1 -#define R_MMU_CONFIG__mmu_enable__disable 0 -#define R_MMU_CONFIG__inv_excp__BITNR 18 -#define R_MMU_CONFIG__inv_excp__WIDTH 1 -#define R_MMU_CONFIG__inv_excp__enable 1 -#define R_MMU_CONFIG__inv_excp__disable 0 -#define R_MMU_CONFIG__acc_excp__BITNR 17 -#define R_MMU_CONFIG__acc_excp__WIDTH 1 -#define R_MMU_CONFIG__acc_excp__enable 1 -#define R_MMU_CONFIG__acc_excp__disable 0 -#define R_MMU_CONFIG__we_excp__BITNR 16 -#define R_MMU_CONFIG__we_excp__WIDTH 1 -#define R_MMU_CONFIG__we_excp__enable 1 -#define R_MMU_CONFIG__we_excp__disable 0 -#define R_MMU_CONFIG__seg_f__BITNR 15 -#define R_MMU_CONFIG__seg_f__WIDTH 1 -#define R_MMU_CONFIG__seg_f__seg 1 -#define R_MMU_CONFIG__seg_f__page 0 -#define R_MMU_CONFIG__seg_e__BITNR 14 -#define R_MMU_CONFIG__seg_e__WIDTH 1 -#define R_MMU_CONFIG__seg_e__seg 1 -#define R_MMU_CONFIG__seg_e__page 0 -#define R_MMU_CONFIG__seg_d__BITNR 13 -#define R_MMU_CONFIG__seg_d__WIDTH 1 -#define R_MMU_CONFIG__seg_d__seg 1 -#define R_MMU_CONFIG__seg_d__page 0 -#define R_MMU_CONFIG__seg_c__BITNR 12 -#define R_MMU_CONFIG__seg_c__WIDTH 1 -#define R_MMU_CONFIG__seg_c__seg 1 -#define R_MMU_CONFIG__seg_c__page 0 -#define R_MMU_CONFIG__seg_b__BITNR 11 -#define R_MMU_CONFIG__seg_b__WIDTH 1 -#define R_MMU_CONFIG__seg_b__seg 1 -#define R_MMU_CONFIG__seg_b__page 0 -#define R_MMU_CONFIG__seg_a__BITNR 10 -#define R_MMU_CONFIG__seg_a__WIDTH 1 -#define R_MMU_CONFIG__seg_a__seg 1 -#define R_MMU_CONFIG__seg_a__page 0 -#define R_MMU_CONFIG__seg_9__BITNR 9 -#define R_MMU_CONFIG__seg_9__WIDTH 1 -#define R_MMU_CONFIG__seg_9__seg 1 -#define R_MMU_CONFIG__seg_9__page 0 -#define R_MMU_CONFIG__seg_8__BITNR 8 -#define R_MMU_CONFIG__seg_8__WIDTH 1 -#define R_MMU_CONFIG__seg_8__seg 1 -#define R_MMU_CONFIG__seg_8__page 0 -#define R_MMU_CONFIG__seg_7__BITNR 7 -#define R_MMU_CONFIG__seg_7__WIDTH 1 -#define R_MMU_CONFIG__seg_7__seg 1 -#define R_MMU_CONFIG__seg_7__page 0 -#define R_MMU_CONFIG__seg_6__BITNR 6 -#define R_MMU_CONFIG__seg_6__WIDTH 1 -#define R_MMU_CONFIG__seg_6__seg 1 -#define R_MMU_CONFIG__seg_6__page 0 -#define R_MMU_CONFIG__seg_5__BITNR 5 -#define R_MMU_CONFIG__seg_5__WIDTH 1 -#define R_MMU_CONFIG__seg_5__seg 1 -#define R_MMU_CONFIG__seg_5__page 0 -#define R_MMU_CONFIG__seg_4__BITNR 4 -#define R_MMU_CONFIG__seg_4__WIDTH 1 -#define R_MMU_CONFIG__seg_4__seg 1 -#define R_MMU_CONFIG__seg_4__page 0 -#define R_MMU_CONFIG__seg_3__BITNR 3 -#define R_MMU_CONFIG__seg_3__WIDTH 1 -#define R_MMU_CONFIG__seg_3__seg 1 -#define R_MMU_CONFIG__seg_3__page 0 -#define R_MMU_CONFIG__seg_2__BITNR 2 -#define R_MMU_CONFIG__seg_2__WIDTH 1 -#define R_MMU_CONFIG__seg_2__seg 1 -#define R_MMU_CONFIG__seg_2__page 0 -#define R_MMU_CONFIG__seg_1__BITNR 1 -#define R_MMU_CONFIG__seg_1__WIDTH 1 -#define R_MMU_CONFIG__seg_1__seg 1 -#define R_MMU_CONFIG__seg_1__page 0 -#define R_MMU_CONFIG__seg_0__BITNR 0 -#define R_MMU_CONFIG__seg_0__WIDTH 1 -#define R_MMU_CONFIG__seg_0__seg 1 -#define R_MMU_CONFIG__seg_0__page 0 - -#define R_MMU_KSEG (IO_TYPECAST_UWORD 0xb0000240) -#define R_MMU_KSEG__seg_f__BITNR 15 -#define R_MMU_KSEG__seg_f__WIDTH 1 -#define R_MMU_KSEG__seg_f__seg 1 -#define R_MMU_KSEG__seg_f__page 0 -#define R_MMU_KSEG__seg_e__BITNR 14 -#define R_MMU_KSEG__seg_e__WIDTH 1 -#define R_MMU_KSEG__seg_e__seg 1 -#define R_MMU_KSEG__seg_e__page 0 -#define R_MMU_KSEG__seg_d__BITNR 13 -#define R_MMU_KSEG__seg_d__WIDTH 1 -#define R_MMU_KSEG__seg_d__seg 1 -#define R_MMU_KSEG__seg_d__page 0 -#define R_MMU_KSEG__seg_c__BITNR 12 -#define R_MMU_KSEG__seg_c__WIDTH 1 -#define R_MMU_KSEG__seg_c__seg 1 -#define R_MMU_KSEG__seg_c__page 0 -#define R_MMU_KSEG__seg_b__BITNR 11 -#define R_MMU_KSEG__seg_b__WIDTH 1 -#define R_MMU_KSEG__seg_b__seg 1 -#define R_MMU_KSEG__seg_b__page 0 -#define R_MMU_KSEG__seg_a__BITNR 10 -#define R_MMU_KSEG__seg_a__WIDTH 1 -#define R_MMU_KSEG__seg_a__seg 1 -#define R_MMU_KSEG__seg_a__page 0 -#define R_MMU_KSEG__seg_9__BITNR 9 -#define R_MMU_KSEG__seg_9__WIDTH 1 -#define R_MMU_KSEG__seg_9__seg 1 -#define R_MMU_KSEG__seg_9__page 0 -#define R_MMU_KSEG__seg_8__BITNR 8 -#define R_MMU_KSEG__seg_8__WIDTH 1 -#define R_MMU_KSEG__seg_8__seg 1 -#define R_MMU_KSEG__seg_8__page 0 -#define R_MMU_KSEG__seg_7__BITNR 7 -#define R_MMU_KSEG__seg_7__WIDTH 1 -#define R_MMU_KSEG__seg_7__seg 1 -#define R_MMU_KSEG__seg_7__page 0 -#define R_MMU_KSEG__seg_6__BITNR 6 -#define R_MMU_KSEG__seg_6__WIDTH 1 -#define R_MMU_KSEG__seg_6__seg 1 -#define R_MMU_KSEG__seg_6__page 0 -#define R_MMU_KSEG__seg_5__BITNR 5 -#define R_MMU_KSEG__seg_5__WIDTH 1 -#define R_MMU_KSEG__seg_5__seg 1 -#define R_MMU_KSEG__seg_5__page 0 -#define R_MMU_KSEG__seg_4__BITNR 4 -#define R_MMU_KSEG__seg_4__WIDTH 1 -#define R_MMU_KSEG__seg_4__seg 1 -#define R_MMU_KSEG__seg_4__page 0 -#define R_MMU_KSEG__seg_3__BITNR 3 -#define R_MMU_KSEG__seg_3__WIDTH 1 -#define R_MMU_KSEG__seg_3__seg 1 -#define R_MMU_KSEG__seg_3__page 0 -#define R_MMU_KSEG__seg_2__BITNR 2 -#define R_MMU_KSEG__seg_2__WIDTH 1 -#define R_MMU_KSEG__seg_2__seg 1 -#define R_MMU_KSEG__seg_2__page 0 -#define R_MMU_KSEG__seg_1__BITNR 1 -#define R_MMU_KSEG__seg_1__WIDTH 1 -#define R_MMU_KSEG__seg_1__seg 1 -#define R_MMU_KSEG__seg_1__page 0 -#define R_MMU_KSEG__seg_0__BITNR 0 -#define R_MMU_KSEG__seg_0__WIDTH 1 -#define R_MMU_KSEG__seg_0__seg 1 -#define R_MMU_KSEG__seg_0__page 0 - -#define R_MMU_CTRL (IO_TYPECAST_BYTE 0xb0000242) -#define R_MMU_CTRL__inv_excp__BITNR 2 -#define R_MMU_CTRL__inv_excp__WIDTH 1 -#define R_MMU_CTRL__inv_excp__enable 1 -#define R_MMU_CTRL__inv_excp__disable 0 -#define R_MMU_CTRL__acc_excp__BITNR 1 -#define R_MMU_CTRL__acc_excp__WIDTH 1 -#define R_MMU_CTRL__acc_excp__enable 1 -#define R_MMU_CTRL__acc_excp__disable 0 -#define R_MMU_CTRL__we_excp__BITNR 0 -#define R_MMU_CTRL__we_excp__WIDTH 1 -#define R_MMU_CTRL__we_excp__enable 1 -#define R_MMU_CTRL__we_excp__disable 0 - -#define R_MMU_ENABLE (IO_TYPECAST_BYTE 0xb0000243) -#define R_MMU_ENABLE__mmu_enable__BITNR 7 -#define R_MMU_ENABLE__mmu_enable__WIDTH 1 -#define R_MMU_ENABLE__mmu_enable__enable 1 -#define R_MMU_ENABLE__mmu_enable__disable 0 - -#define R_MMU_KBASE_LO (IO_TYPECAST_UDWORD 0xb0000244) -#define R_MMU_KBASE_LO__base_7__BITNR 28 -#define R_MMU_KBASE_LO__base_7__WIDTH 4 -#define R_MMU_KBASE_LO__base_6__BITNR 24 -#define R_MMU_KBASE_LO__base_6__WIDTH 4 -#define R_MMU_KBASE_LO__base_5__BITNR 20 -#define R_MMU_KBASE_LO__base_5__WIDTH 4 -#define R_MMU_KBASE_LO__base_4__BITNR 16 -#define R_MMU_KBASE_LO__base_4__WIDTH 4 -#define R_MMU_KBASE_LO__base_3__BITNR 12 -#define R_MMU_KBASE_LO__base_3__WIDTH 4 -#define R_MMU_KBASE_LO__base_2__BITNR 8 -#define R_MMU_KBASE_LO__base_2__WIDTH 4 -#define R_MMU_KBASE_LO__base_1__BITNR 4 -#define R_MMU_KBASE_LO__base_1__WIDTH 4 -#define R_MMU_KBASE_LO__base_0__BITNR 0 -#define R_MMU_KBASE_LO__base_0__WIDTH 4 - -#define R_MMU_KBASE_HI (IO_TYPECAST_UDWORD 0xb0000248) -#define R_MMU_KBASE_HI__base_f__BITNR 28 -#define R_MMU_KBASE_HI__base_f__WIDTH 4 -#define R_MMU_KBASE_HI__base_e__BITNR 24 -#define R_MMU_KBASE_HI__base_e__WIDTH 4 -#define R_MMU_KBASE_HI__base_d__BITNR 20 -#define R_MMU_KBASE_HI__base_d__WIDTH 4 -#define R_MMU_KBASE_HI__base_c__BITNR 16 -#define R_MMU_KBASE_HI__base_c__WIDTH 4 -#define R_MMU_KBASE_HI__base_b__BITNR 12 -#define R_MMU_KBASE_HI__base_b__WIDTH 4 -#define R_MMU_KBASE_HI__base_a__BITNR 8 -#define R_MMU_KBASE_HI__base_a__WIDTH 4 -#define R_MMU_KBASE_HI__base_9__BITNR 4 -#define R_MMU_KBASE_HI__base_9__WIDTH 4 -#define R_MMU_KBASE_HI__base_8__BITNR 0 -#define R_MMU_KBASE_HI__base_8__WIDTH 4 - -#define R_MMU_CONTEXT (IO_TYPECAST_BYTE 0xb000024c) -#define R_MMU_CONTEXT__page_id__BITNR 0 -#define R_MMU_CONTEXT__page_id__WIDTH 6 - -#define R_MMU_CAUSE (IO_TYPECAST_RO_UDWORD 0xb0000250) -#define R_MMU_CAUSE__vpn__BITNR 13 -#define R_MMU_CAUSE__vpn__WIDTH 19 -#define R_MMU_CAUSE__miss_excp__BITNR 12 -#define R_MMU_CAUSE__miss_excp__WIDTH 1 -#define R_MMU_CAUSE__miss_excp__yes 1 -#define R_MMU_CAUSE__miss_excp__no 0 -#define R_MMU_CAUSE__inv_excp__BITNR 11 -#define R_MMU_CAUSE__inv_excp__WIDTH 1 -#define R_MMU_CAUSE__inv_excp__yes 1 -#define R_MMU_CAUSE__inv_excp__no 0 -#define R_MMU_CAUSE__acc_excp__BITNR 10 -#define R_MMU_CAUSE__acc_excp__WIDTH 1 -#define R_MMU_CAUSE__acc_excp__yes 1 -#define R_MMU_CAUSE__acc_excp__no 0 -#define R_MMU_CAUSE__we_excp__BITNR 9 -#define R_MMU_CAUSE__we_excp__WIDTH 1 -#define R_MMU_CAUSE__we_excp__yes 1 -#define R_MMU_CAUSE__we_excp__no 0 -#define R_MMU_CAUSE__wr_rd__BITNR 8 -#define R_MMU_CAUSE__wr_rd__WIDTH 1 -#define R_MMU_CAUSE__wr_rd__write 1 -#define R_MMU_CAUSE__wr_rd__read 0 -#define R_MMU_CAUSE__page_id__BITNR 0 -#define R_MMU_CAUSE__page_id__WIDTH 6 - -#define R_TLB_SELECT (IO_TYPECAST_BYTE 0xb0000254) -#define R_TLB_SELECT__index__BITNR 0 -#define R_TLB_SELECT__index__WIDTH 6 - -#define R_TLB_LO (IO_TYPECAST_UDWORD 0xb0000258) -#define R_TLB_LO__pfn__BITNR 13 -#define R_TLB_LO__pfn__WIDTH 19 -#define R_TLB_LO__global__BITNR 3 -#define R_TLB_LO__global__WIDTH 1 -#define R_TLB_LO__global__yes 1 -#define R_TLB_LO__global__no 0 -#define R_TLB_LO__valid__BITNR 2 -#define R_TLB_LO__valid__WIDTH 1 -#define R_TLB_LO__valid__yes 1 -#define R_TLB_LO__valid__no 0 -#define R_TLB_LO__kernel__BITNR 1 -#define R_TLB_LO__kernel__WIDTH 1 -#define R_TLB_LO__kernel__yes 1 -#define R_TLB_LO__kernel__no 0 -#define R_TLB_LO__we__BITNR 0 -#define R_TLB_LO__we__WIDTH 1 -#define R_TLB_LO__we__yes 1 -#define R_TLB_LO__we__no 0 - -#define R_TLB_HI (IO_TYPECAST_UDWORD 0xb000025c) -#define R_TLB_HI__vpn__BITNR 13 -#define R_TLB_HI__vpn__WIDTH 19 -#define R_TLB_HI__page_id__BITNR 0 -#define R_TLB_HI__page_id__WIDTH 6 - -/* -!* Syncrounous serial port registers -!*/ - -#define R_SYNC_SERIAL1_REC_DATA (IO_TYPECAST_RO_UDWORD 0xb000006c) -#define R_SYNC_SERIAL1_REC_DATA__data_in__BITNR 0 -#define R_SYNC_SERIAL1_REC_DATA__data_in__WIDTH 32 - -#define R_SYNC_SERIAL1_REC_WORD (IO_TYPECAST_RO_UWORD 0xb000006c) -#define R_SYNC_SERIAL1_REC_WORD__data_in__BITNR 0 -#define R_SYNC_SERIAL1_REC_WORD__data_in__WIDTH 16 - -#define R_SYNC_SERIAL1_REC_BYTE (IO_TYPECAST_RO_BYTE 0xb000006c) -#define R_SYNC_SERIAL1_REC_BYTE__data_in__BITNR 0 -#define R_SYNC_SERIAL1_REC_BYTE__data_in__WIDTH 8 - -#define R_SYNC_SERIAL1_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000068) -#define R_SYNC_SERIAL1_STATUS__rec_status__BITNR 15 -#define R_SYNC_SERIAL1_STATUS__rec_status__WIDTH 1 -#define R_SYNC_SERIAL1_STATUS__rec_status__running 0 -#define R_SYNC_SERIAL1_STATUS__rec_status__idle 1 -#define R_SYNC_SERIAL1_STATUS__tr_empty__BITNR 14 -#define R_SYNC_SERIAL1_STATUS__tr_empty__WIDTH 1 -#define R_SYNC_SERIAL1_STATUS__tr_empty__empty 1 -#define R_SYNC_SERIAL1_STATUS__tr_empty__not_empty 0 -#define R_SYNC_SERIAL1_STATUS__tr_ready__BITNR 13 -#define R_SYNC_SERIAL1_STATUS__tr_ready__WIDTH 1 -#define R_SYNC_SERIAL1_STATUS__tr_ready__full 0 -#define R_SYNC_SERIAL1_STATUS__tr_ready__ready 1 -#define R_SYNC_SERIAL1_STATUS__pin_1__BITNR 12 -#define R_SYNC_SERIAL1_STATUS__pin_1__WIDTH 1 -#define R_SYNC_SERIAL1_STATUS__pin_1__low 0 -#define R_SYNC_SERIAL1_STATUS__pin_1__high 1 -#define R_SYNC_SERIAL1_STATUS__pin_0__BITNR 11 -#define R_SYNC_SERIAL1_STATUS__pin_0__WIDTH 1 -#define R_SYNC_SERIAL1_STATUS__pin_0__low 0 -#define R_SYNC_SERIAL1_STATUS__pin_0__high 1 -#define R_SYNC_SERIAL1_STATUS__underflow__BITNR 10 -#define R_SYNC_SERIAL1_STATUS__underflow__WIDTH 1 -#define R_SYNC_SERIAL1_STATUS__underflow__no 0 -#define R_SYNC_SERIAL1_STATUS__underflow__yes 1 -#define R_SYNC_SERIAL1_STATUS__overrun__BITNR 9 -#define R_SYNC_SERIAL1_STATUS__overrun__WIDTH 1 -#define R_SYNC_SERIAL1_STATUS__overrun__no 0 -#define R_SYNC_SERIAL1_STATUS__overrun__yes 1 -#define R_SYNC_SERIAL1_STATUS__data_avail__BITNR 8 -#define R_SYNC_SERIAL1_STATUS__data_avail__WIDTH 1 -#define R_SYNC_SERIAL1_STATUS__data_avail__no 0 -#define R_SYNC_SERIAL1_STATUS__data_avail__yes 1 -#define R_SYNC_SERIAL1_STATUS__data__BITNR 0 -#define R_SYNC_SERIAL1_STATUS__data__WIDTH 8 - -#define R_SYNC_SERIAL1_TR_DATA (IO_TYPECAST_UDWORD 0xb000006c) -#define R_SYNC_SERIAL1_TR_DATA__data_out__BITNR 0 -#define R_SYNC_SERIAL1_TR_DATA__data_out__WIDTH 32 - -#define R_SYNC_SERIAL1_TR_WORD (IO_TYPECAST_UWORD 0xb000006c) -#define R_SYNC_SERIAL1_TR_WORD__data_out__BITNR 0 -#define R_SYNC_SERIAL1_TR_WORD__data_out__WIDTH 16 - -#define R_SYNC_SERIAL1_TR_BYTE (IO_TYPECAST_BYTE 0xb000006c) -#define R_SYNC_SERIAL1_TR_BYTE__data_out__BITNR 0 -#define R_SYNC_SERIAL1_TR_BYTE__data_out__WIDTH 8 - -#define R_SYNC_SERIAL1_CTRL (IO_TYPECAST_UDWORD 0xb0000068) -#define R_SYNC_SERIAL1_CTRL__tr_baud__BITNR 28 -#define R_SYNC_SERIAL1_CTRL__tr_baud__WIDTH 4 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c150Hz 0 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c300Hz 1 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c600Hz 2 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c1200Hz 3 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c2400Hz 4 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c4800Hz 5 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c9600Hz 6 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c19k2Hz 7 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c28k8Hz 8 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c57k6Hz 9 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c115k2Hz 10 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c230k4Hz 11 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c460k8Hz 12 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c921k6Hz 13 -#define R_SYNC_SERIAL1_CTRL__tr_baud__c3125kHz 14 -#define R_SYNC_SERIAL1_CTRL__tr_baud__reserved 15 -#define R_SYNC_SERIAL1_CTRL__dma_enable__BITNR 27 -#define R_SYNC_SERIAL1_CTRL__dma_enable__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__dma_enable__on 1 -#define R_SYNC_SERIAL1_CTRL__dma_enable__off 0 -#define R_SYNC_SERIAL1_CTRL__mode__BITNR 24 -#define R_SYNC_SERIAL1_CTRL__mode__WIDTH 3 -#define R_SYNC_SERIAL1_CTRL__mode__master_output 0 -#define R_SYNC_SERIAL1_CTRL__mode__slave_output 1 -#define R_SYNC_SERIAL1_CTRL__mode__master_input 2 -#define R_SYNC_SERIAL1_CTRL__mode__slave_input 3 -#define R_SYNC_SERIAL1_CTRL__mode__master_bidir 4 -#define R_SYNC_SERIAL1_CTRL__mode__slave_bidir 5 -#define R_SYNC_SERIAL1_CTRL__error__BITNR 23 -#define R_SYNC_SERIAL1_CTRL__error__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__error__normal 0 -#define R_SYNC_SERIAL1_CTRL__error__ignore 1 -#define R_SYNC_SERIAL1_CTRL__rec_enable__BITNR 22 -#define R_SYNC_SERIAL1_CTRL__rec_enable__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__rec_enable__disable 0 -#define R_SYNC_SERIAL1_CTRL__rec_enable__enable 1 -#define R_SYNC_SERIAL1_CTRL__f_synctype__BITNR 21 -#define R_SYNC_SERIAL1_CTRL__f_synctype__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__f_synctype__normal 0 -#define R_SYNC_SERIAL1_CTRL__f_synctype__early 1 -#define R_SYNC_SERIAL1_CTRL__f_syncsize__BITNR 19 -#define R_SYNC_SERIAL1_CTRL__f_syncsize__WIDTH 2 -#define R_SYNC_SERIAL1_CTRL__f_syncsize__bit 0 -#define R_SYNC_SERIAL1_CTRL__f_syncsize__word 1 -#define R_SYNC_SERIAL1_CTRL__f_syncsize__extended 2 -#define R_SYNC_SERIAL1_CTRL__f_syncsize__reserved 3 -#define R_SYNC_SERIAL1_CTRL__f_sync__BITNR 18 -#define R_SYNC_SERIAL1_CTRL__f_sync__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__f_sync__on 0 -#define R_SYNC_SERIAL1_CTRL__f_sync__off 1 -#define R_SYNC_SERIAL1_CTRL__clk_mode__BITNR 17 -#define R_SYNC_SERIAL1_CTRL__clk_mode__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__clk_mode__normal 0 -#define R_SYNC_SERIAL1_CTRL__clk_mode__gated 1 -#define R_SYNC_SERIAL1_CTRL__clk_halt__BITNR 16 -#define R_SYNC_SERIAL1_CTRL__clk_halt__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__clk_halt__running 0 -#define R_SYNC_SERIAL1_CTRL__clk_halt__stopped 1 -#define R_SYNC_SERIAL1_CTRL__bitorder__BITNR 15 -#define R_SYNC_SERIAL1_CTRL__bitorder__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__bitorder__lsb 0 -#define R_SYNC_SERIAL1_CTRL__bitorder__msb 1 -#define R_SYNC_SERIAL1_CTRL__tr_enable__BITNR 14 -#define R_SYNC_SERIAL1_CTRL__tr_enable__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__tr_enable__disable 0 -#define R_SYNC_SERIAL1_CTRL__tr_enable__enable 1 -#define R_SYNC_SERIAL1_CTRL__wordsize__BITNR 11 -#define R_SYNC_SERIAL1_CTRL__wordsize__WIDTH 3 -#define R_SYNC_SERIAL1_CTRL__wordsize__size8bit 0 -#define R_SYNC_SERIAL1_CTRL__wordsize__size12bit 1 -#define R_SYNC_SERIAL1_CTRL__wordsize__size16bit 2 -#define R_SYNC_SERIAL1_CTRL__wordsize__size24bit 3 -#define R_SYNC_SERIAL1_CTRL__wordsize__size32bit 4 -#define R_SYNC_SERIAL1_CTRL__buf_empty__BITNR 10 -#define R_SYNC_SERIAL1_CTRL__buf_empty__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__buf_empty__lmt_8 0 -#define R_SYNC_SERIAL1_CTRL__buf_empty__lmt_0 1 -#define R_SYNC_SERIAL1_CTRL__buf_full__BITNR 9 -#define R_SYNC_SERIAL1_CTRL__buf_full__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__buf_full__lmt_32 0 -#define R_SYNC_SERIAL1_CTRL__buf_full__lmt_8 1 -#define R_SYNC_SERIAL1_CTRL__flow_ctrl__BITNR 8 -#define R_SYNC_SERIAL1_CTRL__flow_ctrl__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__flow_ctrl__disabled 0 -#define R_SYNC_SERIAL1_CTRL__flow_ctrl__enabled 1 -#define R_SYNC_SERIAL1_CTRL__clk_polarity__BITNR 6 -#define R_SYNC_SERIAL1_CTRL__clk_polarity__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__clk_polarity__pos 0 -#define R_SYNC_SERIAL1_CTRL__clk_polarity__neg 1 -#define R_SYNC_SERIAL1_CTRL__frame_polarity__BITNR 5 -#define R_SYNC_SERIAL1_CTRL__frame_polarity__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__frame_polarity__normal 0 -#define R_SYNC_SERIAL1_CTRL__frame_polarity__inverted 1 -#define R_SYNC_SERIAL1_CTRL__status_polarity__BITNR 4 -#define R_SYNC_SERIAL1_CTRL__status_polarity__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__status_polarity__normal 0 -#define R_SYNC_SERIAL1_CTRL__status_polarity__inverted 1 -#define R_SYNC_SERIAL1_CTRL__clk_driver__BITNR 3 -#define R_SYNC_SERIAL1_CTRL__clk_driver__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__clk_driver__normal 0 -#define R_SYNC_SERIAL1_CTRL__clk_driver__inverted 1 -#define R_SYNC_SERIAL1_CTRL__frame_driver__BITNR 2 -#define R_SYNC_SERIAL1_CTRL__frame_driver__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__frame_driver__normal 0 -#define R_SYNC_SERIAL1_CTRL__frame_driver__inverted 1 -#define R_SYNC_SERIAL1_CTRL__status_driver__BITNR 1 -#define R_SYNC_SERIAL1_CTRL__status_driver__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__status_driver__normal 0 -#define R_SYNC_SERIAL1_CTRL__status_driver__inverted 1 -#define R_SYNC_SERIAL1_CTRL__def_out0__BITNR 0 -#define R_SYNC_SERIAL1_CTRL__def_out0__WIDTH 1 -#define R_SYNC_SERIAL1_CTRL__def_out0__high 1 -#define R_SYNC_SERIAL1_CTRL__def_out0__low 0 - -#define R_SYNC_SERIAL3_REC_DATA (IO_TYPECAST_RO_UDWORD 0xb000007c) -#define R_SYNC_SERIAL3_REC_DATA__data_in__BITNR 0 -#define R_SYNC_SERIAL3_REC_DATA__data_in__WIDTH 32 - -#define R_SYNC_SERIAL3_REC_WORD (IO_TYPECAST_RO_UWORD 0xb000007c) -#define R_SYNC_SERIAL3_REC_WORD__data_in__BITNR 0 -#define R_SYNC_SERIAL3_REC_WORD__data_in__WIDTH 16 - -#define R_SYNC_SERIAL3_REC_BYTE (IO_TYPECAST_RO_BYTE 0xb000007c) -#define R_SYNC_SERIAL3_REC_BYTE__data_in__BITNR 0 -#define R_SYNC_SERIAL3_REC_BYTE__data_in__WIDTH 8 - -#define R_SYNC_SERIAL3_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000078) -#define R_SYNC_SERIAL3_STATUS__rec_status__BITNR 15 -#define R_SYNC_SERIAL3_STATUS__rec_status__WIDTH 1 -#define R_SYNC_SERIAL3_STATUS__rec_status__running 0 -#define R_SYNC_SERIAL3_STATUS__rec_status__idle 1 -#define R_SYNC_SERIAL3_STATUS__tr_empty__BITNR 14 -#define R_SYNC_SERIAL3_STATUS__tr_empty__WIDTH 1 -#define R_SYNC_SERIAL3_STATUS__tr_empty__empty 1 -#define R_SYNC_SERIAL3_STATUS__tr_empty__not_empty 0 -#define R_SYNC_SERIAL3_STATUS__tr_ready__BITNR 13 -#define R_SYNC_SERIAL3_STATUS__tr_ready__WIDTH 1 -#define R_SYNC_SERIAL3_STATUS__tr_ready__full 0 -#define R_SYNC_SERIAL3_STATUS__tr_ready__ready 1 -#define R_SYNC_SERIAL3_STATUS__pin_1__BITNR 12 -#define R_SYNC_SERIAL3_STATUS__pin_1__WIDTH 1 -#define R_SYNC_SERIAL3_STATUS__pin_1__low 0 -#define R_SYNC_SERIAL3_STATUS__pin_1__high 1 -#define R_SYNC_SERIAL3_STATUS__pin_0__BITNR 11 -#define R_SYNC_SERIAL3_STATUS__pin_0__WIDTH 1 -#define R_SYNC_SERIAL3_STATUS__pin_0__low 0 -#define R_SYNC_SERIAL3_STATUS__pin_0__high 1 -#define R_SYNC_SERIAL3_STATUS__underflow__BITNR 10 -#define R_SYNC_SERIAL3_STATUS__underflow__WIDTH 1 -#define R_SYNC_SERIAL3_STATUS__underflow__no 0 -#define R_SYNC_SERIAL3_STATUS__underflow__yes 1 -#define R_SYNC_SERIAL3_STATUS__overrun__BITNR 9 -#define R_SYNC_SERIAL3_STATUS__overrun__WIDTH 1 -#define R_SYNC_SERIAL3_STATUS__overrun__no 0 -#define R_SYNC_SERIAL3_STATUS__overrun__yes 1 -#define R_SYNC_SERIAL3_STATUS__data_avail__BITNR 8 -#define R_SYNC_SERIAL3_STATUS__data_avail__WIDTH 1 -#define R_SYNC_SERIAL3_STATUS__data_avail__no 0 -#define R_SYNC_SERIAL3_STATUS__data_avail__yes 1 -#define R_SYNC_SERIAL3_STATUS__data__BITNR 0 -#define R_SYNC_SERIAL3_STATUS__data__WIDTH 8 - -#define R_SYNC_SERIAL3_TR_DATA (IO_TYPECAST_UDWORD 0xb000007c) -#define R_SYNC_SERIAL3_TR_DATA__data_out__BITNR 0 -#define R_SYNC_SERIAL3_TR_DATA__data_out__WIDTH 32 - -#define R_SYNC_SERIAL3_TR_WORD (IO_TYPECAST_UWORD 0xb000007c) -#define R_SYNC_SERIAL3_TR_WORD__data_out__BITNR 0 -#define R_SYNC_SERIAL3_TR_WORD__data_out__WIDTH 16 - -#define R_SYNC_SERIAL3_TR_BYTE (IO_TYPECAST_BYTE 0xb000007c) -#define R_SYNC_SERIAL3_TR_BYTE__data_out__BITNR 0 -#define R_SYNC_SERIAL3_TR_BYTE__data_out__WIDTH 8 - -#define R_SYNC_SERIAL3_CTRL (IO_TYPECAST_UDWORD 0xb0000078) -#define R_SYNC_SERIAL3_CTRL__tr_baud__BITNR 28 -#define R_SYNC_SERIAL3_CTRL__tr_baud__WIDTH 4 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c150Hz 0 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c300Hz 1 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c600Hz 2 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c1200Hz 3 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c2400Hz 4 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c4800Hz 5 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c9600Hz 6 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c19k2Hz 7 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c28k8Hz 8 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c57k6Hz 9 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c115k2Hz 10 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c230k4Hz 11 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c460k8Hz 12 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c921k6Hz 13 -#define R_SYNC_SERIAL3_CTRL__tr_baud__c3125kHz 14 -#define R_SYNC_SERIAL3_CTRL__tr_baud__reserved 15 -#define R_SYNC_SERIAL3_CTRL__dma_enable__BITNR 27 -#define R_SYNC_SERIAL3_CTRL__dma_enable__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__dma_enable__on 1 -#define R_SYNC_SERIAL3_CTRL__dma_enable__off 0 -#define R_SYNC_SERIAL3_CTRL__mode__BITNR 24 -#define R_SYNC_SERIAL3_CTRL__mode__WIDTH 3 -#define R_SYNC_SERIAL3_CTRL__mode__master_output 0 -#define R_SYNC_SERIAL3_CTRL__mode__slave_output 1 -#define R_SYNC_SERIAL3_CTRL__mode__master_input 2 -#define R_SYNC_SERIAL3_CTRL__mode__slave_input 3 -#define R_SYNC_SERIAL3_CTRL__mode__master_bidir 4 -#define R_SYNC_SERIAL3_CTRL__mode__slave_bidir 5 -#define R_SYNC_SERIAL3_CTRL__error__BITNR 23 -#define R_SYNC_SERIAL3_CTRL__error__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__error__normal 0 -#define R_SYNC_SERIAL3_CTRL__error__ignore 1 -#define R_SYNC_SERIAL3_CTRL__rec_enable__BITNR 22 -#define R_SYNC_SERIAL3_CTRL__rec_enable__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__rec_enable__disable 0 -#define R_SYNC_SERIAL3_CTRL__rec_enable__enable 1 -#define R_SYNC_SERIAL3_CTRL__f_synctype__BITNR 21 -#define R_SYNC_SERIAL3_CTRL__f_synctype__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__f_synctype__normal 0 -#define R_SYNC_SERIAL3_CTRL__f_synctype__early 1 -#define R_SYNC_SERIAL3_CTRL__f_syncsize__BITNR 19 -#define R_SYNC_SERIAL3_CTRL__f_syncsize__WIDTH 2 -#define R_SYNC_SERIAL3_CTRL__f_syncsize__bit 0 -#define R_SYNC_SERIAL3_CTRL__f_syncsize__word 1 -#define R_SYNC_SERIAL3_CTRL__f_syncsize__extended 2 -#define R_SYNC_SERIAL3_CTRL__f_syncsize__reserved 3 -#define R_SYNC_SERIAL3_CTRL__f_sync__BITNR 18 -#define R_SYNC_SERIAL3_CTRL__f_sync__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__f_sync__on 0 -#define R_SYNC_SERIAL3_CTRL__f_sync__off 1 -#define R_SYNC_SERIAL3_CTRL__clk_mode__BITNR 17 -#define R_SYNC_SERIAL3_CTRL__clk_mode__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__clk_mode__normal 0 -#define R_SYNC_SERIAL3_CTRL__clk_mode__gated 1 -#define R_SYNC_SERIAL3_CTRL__clk_halt__BITNR 16 -#define R_SYNC_SERIAL3_CTRL__clk_halt__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__clk_halt__running 0 -#define R_SYNC_SERIAL3_CTRL__clk_halt__stopped 1 -#define R_SYNC_SERIAL3_CTRL__bitorder__BITNR 15 -#define R_SYNC_SERIAL3_CTRL__bitorder__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__bitorder__lsb 0 -#define R_SYNC_SERIAL3_CTRL__bitorder__msb 1 -#define R_SYNC_SERIAL3_CTRL__tr_enable__BITNR 14 -#define R_SYNC_SERIAL3_CTRL__tr_enable__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__tr_enable__disable 0 -#define R_SYNC_SERIAL3_CTRL__tr_enable__enable 1 -#define R_SYNC_SERIAL3_CTRL__wordsize__BITNR 11 -#define R_SYNC_SERIAL3_CTRL__wordsize__WIDTH 3 -#define R_SYNC_SERIAL3_CTRL__wordsize__size8bit 0 -#define R_SYNC_SERIAL3_CTRL__wordsize__size12bit 1 -#define R_SYNC_SERIAL3_CTRL__wordsize__size16bit 2 -#define R_SYNC_SERIAL3_CTRL__wordsize__size24bit 3 -#define R_SYNC_SERIAL3_CTRL__wordsize__size32bit 4 -#define R_SYNC_SERIAL3_CTRL__buf_empty__BITNR 10 -#define R_SYNC_SERIAL3_CTRL__buf_empty__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__buf_empty__lmt_8 0 -#define R_SYNC_SERIAL3_CTRL__buf_empty__lmt_0 1 -#define R_SYNC_SERIAL3_CTRL__buf_full__BITNR 9 -#define R_SYNC_SERIAL3_CTRL__buf_full__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__buf_full__lmt_32 0 -#define R_SYNC_SERIAL3_CTRL__buf_full__lmt_8 1 -#define R_SYNC_SERIAL3_CTRL__flow_ctrl__BITNR 8 -#define R_SYNC_SERIAL3_CTRL__flow_ctrl__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__flow_ctrl__disabled 0 -#define R_SYNC_SERIAL3_CTRL__flow_ctrl__enabled 1 -#define R_SYNC_SERIAL3_CTRL__clk_polarity__BITNR 6 -#define R_SYNC_SERIAL3_CTRL__clk_polarity__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__clk_polarity__pos 0 -#define R_SYNC_SERIAL3_CTRL__clk_polarity__neg 1 -#define R_SYNC_SERIAL3_CTRL__frame_polarity__BITNR 5 -#define R_SYNC_SERIAL3_CTRL__frame_polarity__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__frame_polarity__normal 0 -#define R_SYNC_SERIAL3_CTRL__frame_polarity__inverted 1 -#define R_SYNC_SERIAL3_CTRL__status_polarity__BITNR 4 -#define R_SYNC_SERIAL3_CTRL__status_polarity__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__status_polarity__normal 0 -#define R_SYNC_SERIAL3_CTRL__status_polarity__inverted 1 -#define R_SYNC_SERIAL3_CTRL__clk_driver__BITNR 3 -#define R_SYNC_SERIAL3_CTRL__clk_driver__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__clk_driver__normal 0 -#define R_SYNC_SERIAL3_CTRL__clk_driver__inverted 1 -#define R_SYNC_SERIAL3_CTRL__frame_driver__BITNR 2 -#define R_SYNC_SERIAL3_CTRL__frame_driver__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__frame_driver__normal 0 -#define R_SYNC_SERIAL3_CTRL__frame_driver__inverted 1 -#define R_SYNC_SERIAL3_CTRL__status_driver__BITNR 1 -#define R_SYNC_SERIAL3_CTRL__status_driver__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__status_driver__normal 0 -#define R_SYNC_SERIAL3_CTRL__status_driver__inverted 1 -#define R_SYNC_SERIAL3_CTRL__def_out0__BITNR 0 -#define R_SYNC_SERIAL3_CTRL__def_out0__WIDTH 1 -#define R_SYNC_SERIAL3_CTRL__def_out0__high 1 -#define R_SYNC_SERIAL3_CTRL__def_out0__low 0 - diff --git a/include/asm-cris/arch-v10/sv_addr_ag.h b/include/asm-cris/arch-v10/sv_addr_ag.h deleted file mode 100644 index e4a6b68b8982..000000000000 --- a/include/asm-cris/arch-v10/sv_addr_ag.h +++ /dev/null @@ -1,139 +0,0 @@ -/*!************************************************************************** -*! -*! MACROS: -*! IO_MASK(reg,field) -*! IO_STATE(reg,field,state) -*! IO_EXTRACT(reg,field,val) -*! IO_STATE_VALUE(reg,field,state) -*! IO_BITNR(reg,field) -*! IO_WIDTH(reg,field) -*! IO_FIELD(reg,field,val) -*! IO_RD(reg) -*! All moderegister addresses and fields of these. -*! -*!**************************************************************************/ - -#ifndef __sv_addr_ag_h__ -#define __sv_addr_ag_h__ - - -#define __test_sv_addr__ 0 - -/*------------------------------------------------------------ -!* General macros to manipulate moderegisters. -!*-----------------------------------------------------------*/ - -/* IO_MASK returns a mask for a specified bitfield in a register. - Note that this macro doesn't work when field width is 32 bits. */ -#define IO_MASK(reg, field) IO_MASK_ (reg##_, field##_) -#define IO_MASK_(reg_, field_) \ - ( ( ( 1 << reg_##_##field_##_WIDTH ) - 1 ) << reg_##_##field_##_BITNR ) - -/* IO_STATE returns a constant corresponding to a one of the symbolic - states that the bitfield can have. (Shifted to correct position) */ -#define IO_STATE(reg, field, state) IO_STATE_ (reg##_, field##_, _##state) -#define IO_STATE_(reg_, field_, _state) \ - ( reg_##_##field_##_state << reg_##_##field_##_BITNR ) - -/* IO_EXTRACT returns the masked and shifted value corresponding to the - bitfield can have. */ -#define IO_EXTRACT(reg, field, val) IO_EXTRACT_ (reg##_, field##_, val) -#define IO_EXTRACT_(reg_, field_, val) ( (( ( ( 1 << reg_##_##field_##_WIDTH ) \ - - 1 ) << reg_##_##field_##_BITNR ) & (val)) >> reg_##_##field_##_BITNR ) - -/* IO_STATE_VALUE returns a constant corresponding to a one of the symbolic - states that the bitfield can have. (Not shifted) */ -#define IO_STATE_VALUE(reg, field, state) \ - IO_STATE_VALUE_ (reg##_, field##_, _##state) -#define IO_STATE_VALUE_(reg_, field_, _state) ( reg_##_##field_##_state ) - -/* IO_FIELD shifts the val parameter to be aligned with the bitfield - specified. */ -#define IO_FIELD(reg, field, val) IO_FIELD_ (reg##_, field##_, val) -#define IO_FIELD_(reg_, field_, val) ((val) << reg_##_##field_##_BITNR) - -/* IO_BITNR returns the starting bitnumber of a bitfield. Bit 0 is - LSB and the returned bitnumber is LSB of the field. */ -#define IO_BITNR(reg, field) IO_BITNR_ (reg##_, field##_) -#define IO_BITNR_(reg_, field_) (reg_##_##field_##_BITNR) - -/* IO_WIDTH returns the width, in bits, of a bitfield. */ -#define IO_WIDTH(reg, field) IO_WIDTH_ (reg##_, field##_) -#define IO_WIDTH_(reg_, field_) (reg_##_##field_##_WIDTH) - -/*--- Obsolete. Kept for backw compatibility. ---*/ -/* Reads (or writes) a byte/uword/udword from the specified mode - register. */ -#define IO_RD(reg) (*(volatile u32*)(reg)) -#define IO_RD_B(reg) (*(volatile u8*)(reg)) -#define IO_RD_W(reg) (*(volatile u16*)(reg)) -#define IO_RD_D(reg) (*(volatile u32*)(reg)) - -/*------------------------------------------------------------ -!* Start addresses of the different memory areas. -!*-----------------------------------------------------------*/ - -#define MEM_CSE0_START (0x00000000) -#define MEM_CSE0_SIZE (0x04000000) -#define MEM_CSE1_START (0x04000000) -#define MEM_CSE1_SIZE (0x04000000) -#define MEM_CSR0_START (0x08000000) -#define MEM_CSR1_START (0x0c000000) -#define MEM_CSP0_START (0x10000000) -#define MEM_CSP1_START (0x14000000) -#define MEM_CSP2_START (0x18000000) -#define MEM_CSP3_START (0x1c000000) -#define MEM_CSP4_START (0x20000000) -#define MEM_CSP5_START (0x24000000) -#define MEM_CSP6_START (0x28000000) -#define MEM_CSP7_START (0x2c000000) -#define MEM_DRAM_START (0x40000000) - -#define MEM_NON_CACHEABLE (0x80000000) - -/*------------------------------------------------------------ -!* Type casts used in mode register macros, making pointer -!* dereferencing possible. Empty in assembler. -!*-----------------------------------------------------------*/ - -#ifndef __ASSEMBLER__ -# define IO_TYPECAST_UDWORD (volatile u32*) -# define IO_TYPECAST_RO_UDWORD (const volatile u32*) -# define IO_TYPECAST_UWORD (volatile u16*) -# define IO_TYPECAST_RO_UWORD (const volatile u16*) -# define IO_TYPECAST_BYTE (volatile u8*) -# define IO_TYPECAST_RO_BYTE (const volatile u8*) -#else -# define IO_TYPECAST_UDWORD -# define IO_TYPECAST_RO_UDWORD -# define IO_TYPECAST_UWORD -# define IO_TYPECAST_RO_UWORD -# define IO_TYPECAST_BYTE -# define IO_TYPECAST_RO_BYTE -#endif - -/*------------------------------------------------------------*/ - -#include "sv_addr.agh" - -#if __test_sv_addr__ -/* IO_MASK( R_BUS_CONFIG , CE ) */ -IO_MASK( R_WAITSTATES , SRAM_WS ) -IO_MASK( R_TEST , W32 ) - -IO_STATE( R_BUS_CONFIG, CE, DISABLE ) -IO_STATE( R_BUS_CONFIG, CE, ENABLE ) - -IO_STATE( R_DRAM_TIMING, REF, IVAL2 ) - -IO_MASK( R_DRAM_TIMING, REF ) - -IO_MASK( R_EXT_DMA_0_STAT, TFR_COUNT ) >> IO_BITNR( R_EXT_DMA_0_STAT, TFR_COUNT ) - -IO_RD(R_EXT_DMA_0_STAT) & IO_MASK( R_EXT_DMA_0_STAT, S ) - == IO_STATE( R_EXT_DMA_0_STAT, S, STARTED ) -#endif - - -#endif /* ifndef __sv_addr_ag_h__ */ - diff --git a/include/asm-cris/arch-v10/svinto.h b/include/asm-cris/arch-v10/svinto.h deleted file mode 100644 index 0881a1af7cee..000000000000 --- a/include/asm-cris/arch-v10/svinto.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef _ASM_CRIS_SVINTO_H -#define _ASM_CRIS_SVINTO_H - -#include "sv_addr_ag.h" - -extern unsigned int genconfig_shadow; /* defined and set in head.S */ - -/* dma stuff */ - -enum { /* Available in: */ - d_eol = (1 << 0), /* flags */ - d_eop = (1 << 1), /* flags & status */ - d_wait = (1 << 2), /* flags */ - d_int = (1 << 3), /* flags */ - d_txerr = (1 << 4), /* flags */ - d_stop = (1 << 4), /* status */ - d_ecp = (1 << 4), /* flags & status */ - d_pri = (1 << 5), /* flags & status */ - d_alignerr = (1 << 6), /* status */ - d_crcerr = (1 << 7) /* status */ -}; - -/* Do remember that DMA does not go through the MMU and needs - * a real physical address, not an address virtually mapped or - * paged. Therefore the buf/next ptrs below are unsigned long instead - * of void * to give a warning if you try to put a pointer directly - * to them instead of going through virt_to_phys/phys_to_virt. - */ - -typedef struct etrax_dma_descr { - unsigned short sw_len; /* 0-1 */ - unsigned short ctrl; /* 2-3 */ - unsigned long next; /* 4-7 */ - unsigned long buf; /* 8-11 */ - unsigned short hw_len; /* 12-13 */ - unsigned char status; /* 14 */ - unsigned char fifo_len; /* 15 */ -} etrax_dma_descr; - - -/* Use this for constant numbers only */ -#define RESET_DMA_NUM( n ) \ - *R_DMA_CH##n##_CMD = IO_STATE( R_DMA_CH0_CMD, cmd, reset ) - -/* Use this for constant numbers or symbols, - * having two macros makes it possible to use constant expressions. - */ -#define RESET_DMA( n ) RESET_DMA_NUM( n ) - - -/* Use this for constant numbers only */ -#define WAIT_DMA_NUM( n ) \ - while( (*R_DMA_CH##n##_CMD & IO_MASK( R_DMA_CH0_CMD, cmd )) != \ - IO_STATE( R_DMA_CH0_CMD, cmd, hold ) ) - -/* Use this for constant numbers or symbols - * having two macros makes it possible to use constant expressions. - */ -#define WAIT_DMA( n ) WAIT_DMA_NUM( n ) - -extern void prepare_rx_descriptor(struct etrax_dma_descr *desc); -extern void flush_etrax_cache(void); - -#endif diff --git a/include/asm-cris/arch-v10/system.h b/include/asm-cris/arch-v10/system.h deleted file mode 100644 index 4a9cd36c9e16..000000000000 --- a/include/asm-cris/arch-v10/system.h +++ /dev/null @@ -1,63 +0,0 @@ -#ifndef __ASM_CRIS_ARCH_SYSTEM_H -#define __ASM_CRIS_ARCH_SYSTEM_H - - -/* read the CPU version register */ - -static inline unsigned long rdvr(void) { - unsigned char vr; - __asm__ volatile ("move $vr,%0" : "=rm" (vr)); - return vr; -} - -#define cris_machine_name "cris" - -/* read/write the user-mode stackpointer */ - -static inline unsigned long rdusp(void) { - unsigned long usp; - __asm__ __volatile__("move $usp,%0" : "=rm" (usp)); - return usp; -} - -#define wrusp(usp) \ - __asm__ __volatile__("move %0,$usp" : /* no outputs */ : "rm" (usp)) - -/* read the current stackpointer */ - -static inline unsigned long rdsp(void) { - unsigned long sp; - __asm__ __volatile__("move.d $sp,%0" : "=rm" (sp)); - return sp; -} - -static inline unsigned long _get_base(char * addr) -{ - return 0; -} - -#define nop() __asm__ __volatile__ ("nop"); - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) -#define tas(ptr) (xchg((ptr),1)) - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((struct __xchg_dummy *)(x)) - -/* interrupt control.. */ -#define local_save_flags(x) __asm__ __volatile__ ("move $ccr,%0" : "=rm" (x) : : "memory"); -#define local_irq_restore(x) __asm__ __volatile__ ("move %0,$ccr" : : "rm" (x) : "memory"); -#define local_irq_disable() __asm__ __volatile__ ( "di" : : :"memory"); -#define local_irq_enable() __asm__ __volatile__ ( "ei" : : :"memory"); - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - !(flags & (1<<5)); \ -}) - -/* For spinlocks etc */ -#define local_irq_save(x) __asm__ __volatile__ ("move $ccr,%0\n\tdi" : "=rm" (x) : : "memory"); - -#endif diff --git a/include/asm-cris/arch-v10/thread_info.h b/include/asm-cris/arch-v10/thread_info.h deleted file mode 100644 index 218f4152d3e5..000000000000 --- a/include/asm-cris/arch-v10/thread_info.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_ARCH_THREAD_INFO_H -#define _ASM_ARCH_THREAD_INFO_H - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - __asm__("and.d $sp,%0; ":"=r" (ti) : "0" (~8191UL)); - return ti; -} - -#endif diff --git a/include/asm-cris/arch-v10/timex.h b/include/asm-cris/arch-v10/timex.h deleted file mode 100644 index e48447d94faf..000000000000 --- a/include/asm-cris/arch-v10/timex.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Use prescale timer at 25000 Hz instead of the baudrate timer at - * 19200 to get rid of the 64ppm to fast timer (and we get better - * resolution within a jiffie as well. - */ -#ifndef _ASM_CRIS_ARCH_TIMEX_H -#define _ASM_CRIS_ARCH_TIMEX_H - -/* The prescaler clock runs at 25MHz, we divide it by 1000 in the prescaler */ -/* If you change anything here you must check time.c as well... */ -#define PRESCALE_FREQ 25000000 -#define PRESCALE_VALUE 1000 -#define CLOCK_TICK_RATE 25000 /* Underlying frequency of the HZ timer */ -/* The timer0 values gives 40us resolution (1/25000) but interrupts at HZ*/ -#define TIMER0_FREQ (CLOCK_TICK_RATE) -#define TIMER0_CLKSEL flexible -#define TIMER0_DIV (TIMER0_FREQ/(HZ)) - - -#define GET_JIFFIES_USEC() \ - ( (TIMER0_DIV - *R_TIMER0_DATA) * (1000000/HZ)/TIMER0_DIV ) - -unsigned long get_ns_in_jiffie(void); - -static inline unsigned long get_us_in_jiffie_highres(void) -{ - return get_ns_in_jiffie()/1000; -} - -#endif diff --git a/include/asm-cris/arch-v10/tlb.h b/include/asm-cris/arch-v10/tlb.h deleted file mode 100644 index 31525bbe75c3..000000000000 --- a/include/asm-cris/arch-v10/tlb.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _CRIS_ARCH_TLB_H -#define _CRIS_ARCH_TLB_H - -/* The TLB can host up to 64 different mm contexts at the same time. - * The last page_id is never running - it is used as an invalid page_id - * so we can make TLB entries that will never match. - */ -#define NUM_TLB_ENTRIES 64 -#define NUM_PAGEID 64 -#define INVALID_PAGEID 63 -#define NO_CONTEXT -1 - -#endif diff --git a/include/asm-cris/arch-v10/uaccess.h b/include/asm-cris/arch-v10/uaccess.h deleted file mode 100644 index 65b02d9b605a..000000000000 --- a/include/asm-cris/arch-v10/uaccess.h +++ /dev/null @@ -1,660 +0,0 @@ -/* - * Authors: Bjorn Wesen (bjornw@axis.com) - * Hans-Peter Nilsson (hp@axis.com) - * - */ -#ifndef _CRIS_ARCH_UACCESS_H -#define _CRIS_ARCH_UACCESS_H - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - * - * Note that PC at a fault is the address *after* the faulting - * instruction. - */ -#define __put_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - " "op" %1,[%2]\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: move.d %3,%0\n" \ - " jump 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .dword 2b,3b\n" \ - " .previous\n" \ - : "=r" (err) \ - : "r" (x), "r" (addr), "g" (-EFAULT), "0" (err)) - -#define __put_user_asm_64(x, addr, err) \ - __asm__ __volatile__( \ - " move.d %M1,[%2]\n" \ - "2: move.d %H1,[%2+4]\n" \ - "4:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: move.d %3,%0\n" \ - " jump 4b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .dword 2b,3b\n" \ - " .dword 4b,3b\n" \ - " .previous\n" \ - : "=r" (err) \ - : "r" (x), "r" (addr), "g" (-EFAULT), "0" (err)) - -/* See comment before __put_user_asm. */ - -#define __get_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - " "op" [%2],%1\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: move.d %3,%0\n" \ - " moveq 0,%1\n" \ - " jump 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .dword 2b,3b\n" \ - " .previous\n" \ - : "=r" (err), "=r" (x) \ - : "r" (addr), "g" (-EFAULT), "0" (err)) - -#define __get_user_asm_64(x, addr, err) \ - __asm__ __volatile__( \ - " move.d [%2],%M1\n" \ - "2: move.d [%2+4],%H1\n" \ - "4:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: move.d %3,%0\n" \ - " moveq 0,%1\n" \ - " jump 4b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .dword 2b,3b\n" \ - " .dword 4b,3b\n" \ - " .previous\n" \ - : "=r" (err), "=r" (x) \ - : "r" (addr), "g" (-EFAULT), "0" (err)) - -/* - * Copy a null terminated string from userspace. - * - * Must return: - * -EFAULT for an exception - * count if we hit the buffer limit - * bytes copied if we hit a null byte - * (without the null byte) - */ -static inline long -__do_strncpy_from_user(char *dst, const char *src, long count) -{ - long res; - - if (count == 0) - return 0; - - /* - * Currently, in 2.4.0-test9, most ports use a simple byte-copy loop. - * So do we. - * - * This code is deduced from: - * - * char tmp2; - * long tmp1, tmp3 - * tmp1 = count; - * while ((*dst++ = (tmp2 = *src++)) != 0 - * && --tmp1) - * ; - * - * res = count - tmp1; - * - * with tweaks. - */ - - __asm__ __volatile__ ( - " move.d %3,%0\n" - " move.b [%2+],$r9\n" - "1: beq 2f\n" - " move.b $r9,[%1+]\n" - - " subq 1,%0\n" - " bne 1b\n" - " move.b [%2+],$r9\n" - - "2: sub.d %3,%0\n" - " neg.d %0,%0\n" - "3:\n" - " .section .fixup,\"ax\"\n" - "4: move.d %7,%0\n" - " jump 3b\n" - - /* There's one address for a fault at the first move, and - two possible PC values for a fault at the second move, - being a delay-slot filler. However, the branch-target - for the second move is the same as the first address. - Just so you don't get confused... */ - " .previous\n" - " .section __ex_table,\"a\"\n" - " .dword 1b,4b\n" - " .dword 2b,4b\n" - " .previous" - : "=r" (res), "=r" (dst), "=r" (src), "=r" (count) - : "3" (count), "1" (dst), "2" (src), "g" (-EFAULT) - : "r9"); - - return res; -} - -/* A few copy asms to build up the more complex ones from. - - Note again, a post-increment is performed regardless of whether a bus - fault occurred in that instruction, and PC for a faulted insn is the - address *after* the insn. */ - -#define __asm_copy_user_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm__ __volatile__ ( \ - COPY \ - "1:\n" \ - " .section .fixup,\"ax\"\n" \ - FIXUP \ - " jump 1b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - TENTRY \ - " .previous\n" \ - : "=r" (to), "=r" (from), "=r" (ret) \ - : "0" (to), "1" (from), "2" (ret) \ - : "r9", "memory") - -#define __asm_copy_from_user_1(to, from, ret) \ - __asm_copy_user_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - "2: move.b $r9,[%0+]\n", \ - "3: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 2b,3b\n") - -#define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_user_cont(to, from, ret, \ - " move.w [%1+],$r9\n" \ - "2: move.w $r9,[%0+]\n" COPY, \ - "3: addq 2,%2\n" \ - " clear.w [%0+]\n" FIXUP, \ - " .dword 2b,3b\n" TENTRY) - -#define __asm_copy_from_user_2(to, from, ret) \ - __asm_copy_from_user_2x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_3(to, from, ret) \ - __asm_copy_from_user_2x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - "4: move.b $r9,[%0+]\n", \ - "5: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 4b,5b\n") - -#define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_user_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - "2: move.d $r9,[%0+]\n" COPY, \ - "3: addq 4,%2\n" \ - " clear.d [%0+]\n" FIXUP, \ - " .dword 2b,3b\n" TENTRY) - -#define __asm_copy_from_user_4(to, from, ret) \ - __asm_copy_from_user_4x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_5(to, from, ret) \ - __asm_copy_from_user_4x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - "4: move.b $r9,[%0+]\n", \ - "5: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 4b,5b\n") - -#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_4x_cont(to, from, ret, \ - " move.w [%1+],$r9\n" \ - "4: move.w $r9,[%0+]\n" COPY, \ - "5: addq 2,%2\n" \ - " clear.w [%0+]\n" FIXUP, \ - " .dword 4b,5b\n" TENTRY) - -#define __asm_copy_from_user_6(to, from, ret) \ - __asm_copy_from_user_6x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_7(to, from, ret) \ - __asm_copy_from_user_6x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - "6: move.b $r9,[%0+]\n", \ - "7: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 6b,7b\n") - -#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_4x_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - "4: move.d $r9,[%0+]\n" COPY, \ - "5: addq 4,%2\n" \ - " clear.d [%0+]\n" FIXUP, \ - " .dword 4b,5b\n" TENTRY) - -#define __asm_copy_from_user_8(to, from, ret) \ - __asm_copy_from_user_8x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_9(to, from, ret) \ - __asm_copy_from_user_8x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - "6: move.b $r9,[%0+]\n", \ - "7: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 6b,7b\n") - -#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_8x_cont(to, from, ret, \ - " move.w [%1+],$r9\n" \ - "6: move.w $r9,[%0+]\n" COPY, \ - "7: addq 2,%2\n" \ - " clear.w [%0+]\n" FIXUP, \ - " .dword 6b,7b\n" TENTRY) - -#define __asm_copy_from_user_10(to, from, ret) \ - __asm_copy_from_user_10x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_11(to, from, ret) \ - __asm_copy_from_user_10x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - "8: move.b $r9,[%0+]\n", \ - "9: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 8b,9b\n") - -#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_8x_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - "6: move.d $r9,[%0+]\n" COPY, \ - "7: addq 4,%2\n" \ - " clear.d [%0+]\n" FIXUP, \ - " .dword 6b,7b\n" TENTRY) - -#define __asm_copy_from_user_12(to, from, ret) \ - __asm_copy_from_user_12x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_13(to, from, ret) \ - __asm_copy_from_user_12x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - "8: move.b $r9,[%0+]\n", \ - "9: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 8b,9b\n") - -#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_12x_cont(to, from, ret, \ - " move.w [%1+],$r9\n" \ - "8: move.w $r9,[%0+]\n" COPY, \ - "9: addq 2,%2\n" \ - " clear.w [%0+]\n" FIXUP, \ - " .dword 8b,9b\n" TENTRY) - -#define __asm_copy_from_user_14(to, from, ret) \ - __asm_copy_from_user_14x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_15(to, from, ret) \ - __asm_copy_from_user_14x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - "10: move.b $r9,[%0+]\n", \ - "11: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 10b,11b\n") - -#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_12x_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - "8: move.d $r9,[%0+]\n" COPY, \ - "9: addq 4,%2\n" \ - " clear.d [%0+]\n" FIXUP, \ - " .dword 8b,9b\n" TENTRY) - -#define __asm_copy_from_user_16(to, from, ret) \ - __asm_copy_from_user_16x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_16x_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - "10: move.d $r9,[%0+]\n" COPY, \ - "11: addq 4,%2\n" \ - " clear.d [%0+]\n" FIXUP, \ - " .dword 10b,11b\n" TENTRY) - -#define __asm_copy_from_user_20(to, from, ret) \ - __asm_copy_from_user_20x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_20x_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - "12: move.d $r9,[%0+]\n" COPY, \ - "13: addq 4,%2\n" \ - " clear.d [%0+]\n" FIXUP, \ - " .dword 12b,13b\n" TENTRY) - -#define __asm_copy_from_user_24(to, from, ret) \ - __asm_copy_from_user_24x_cont(to, from, ret, "", "", "") - -/* And now, the to-user ones. */ - -#define __asm_copy_to_user_1(to, from, ret) \ - __asm_copy_user_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - " move.b $r9,[%0+]\n2:\n", \ - "3: addq 1,%2\n", \ - " .dword 2b,3b\n") - -#define __asm_copy_to_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_user_cont(to, from, ret, \ - " move.w [%1+],$r9\n" \ - " move.w $r9,[%0+]\n2:\n" COPY, \ - "3: addq 2,%2\n" FIXUP, \ - " .dword 2b,3b\n" TENTRY) - -#define __asm_copy_to_user_2(to, from, ret) \ - __asm_copy_to_user_2x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_3(to, from, ret) \ - __asm_copy_to_user_2x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - " move.b $r9,[%0+]\n4:\n", \ - "5: addq 1,%2\n", \ - " .dword 4b,5b\n") - -#define __asm_copy_to_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_user_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - " move.d $r9,[%0+]\n2:\n" COPY, \ - "3: addq 4,%2\n" FIXUP, \ - " .dword 2b,3b\n" TENTRY) - -#define __asm_copy_to_user_4(to, from, ret) \ - __asm_copy_to_user_4x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_5(to, from, ret) \ - __asm_copy_to_user_4x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - " move.b $r9,[%0+]\n4:\n", \ - "5: addq 1,%2\n", \ - " .dword 4b,5b\n") - -#define __asm_copy_to_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_4x_cont(to, from, ret, \ - " move.w [%1+],$r9\n" \ - " move.w $r9,[%0+]\n4:\n" COPY, \ - "5: addq 2,%2\n" FIXUP, \ - " .dword 4b,5b\n" TENTRY) - -#define __asm_copy_to_user_6(to, from, ret) \ - __asm_copy_to_user_6x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_7(to, from, ret) \ - __asm_copy_to_user_6x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - " move.b $r9,[%0+]\n6:\n", \ - "7: addq 1,%2\n", \ - " .dword 6b,7b\n") - -#define __asm_copy_to_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_4x_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - " move.d $r9,[%0+]\n4:\n" COPY, \ - "5: addq 4,%2\n" FIXUP, \ - " .dword 4b,5b\n" TENTRY) - -#define __asm_copy_to_user_8(to, from, ret) \ - __asm_copy_to_user_8x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_9(to, from, ret) \ - __asm_copy_to_user_8x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - " move.b $r9,[%0+]\n6:\n", \ - "7: addq 1,%2\n", \ - " .dword 6b,7b\n") - -#define __asm_copy_to_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_8x_cont(to, from, ret, \ - " move.w [%1+],$r9\n" \ - " move.w $r9,[%0+]\n6:\n" COPY, \ - "7: addq 2,%2\n" FIXUP, \ - " .dword 6b,7b\n" TENTRY) - -#define __asm_copy_to_user_10(to, from, ret) \ - __asm_copy_to_user_10x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_11(to, from, ret) \ - __asm_copy_to_user_10x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - " move.b $r9,[%0+]\n8:\n", \ - "9: addq 1,%2\n", \ - " .dword 8b,9b\n") - -#define __asm_copy_to_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_8x_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - " move.d $r9,[%0+]\n6:\n" COPY, \ - "7: addq 4,%2\n" FIXUP, \ - " .dword 6b,7b\n" TENTRY) - -#define __asm_copy_to_user_12(to, from, ret) \ - __asm_copy_to_user_12x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_13(to, from, ret) \ - __asm_copy_to_user_12x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - " move.b $r9,[%0+]\n8:\n", \ - "9: addq 1,%2\n", \ - " .dword 8b,9b\n") - -#define __asm_copy_to_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_12x_cont(to, from, ret, \ - " move.w [%1+],$r9\n" \ - " move.w $r9,[%0+]\n8:\n" COPY, \ - "9: addq 2,%2\n" FIXUP, \ - " .dword 8b,9b\n" TENTRY) - -#define __asm_copy_to_user_14(to, from, ret) \ - __asm_copy_to_user_14x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_15(to, from, ret) \ - __asm_copy_to_user_14x_cont(to, from, ret, \ - " move.b [%1+],$r9\n" \ - " move.b $r9,[%0+]\n10:\n", \ - "11: addq 1,%2\n", \ - " .dword 10b,11b\n") - -#define __asm_copy_to_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_12x_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - " move.d $r9,[%0+]\n8:\n" COPY, \ - "9: addq 4,%2\n" FIXUP, \ - " .dword 8b,9b\n" TENTRY) - -#define __asm_copy_to_user_16(to, from, ret) \ - __asm_copy_to_user_16x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_16x_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - " move.d $r9,[%0+]\n10:\n" COPY, \ - "11: addq 4,%2\n" FIXUP, \ - " .dword 10b,11b\n" TENTRY) - -#define __asm_copy_to_user_20(to, from, ret) \ - __asm_copy_to_user_20x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_20x_cont(to, from, ret, \ - " move.d [%1+],$r9\n" \ - " move.d $r9,[%0+]\n12:\n" COPY, \ - "13: addq 4,%2\n" FIXUP, \ - " .dword 12b,13b\n" TENTRY) - -#define __asm_copy_to_user_24(to, from, ret) \ - __asm_copy_to_user_24x_cont(to, from, ret, "", "", "") - -/* Define a few clearing asms with exception handlers. */ - -/* This frame-asm is like the __asm_copy_user_cont one, but has one less - input. */ - -#define __asm_clear(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm__ __volatile__ ( \ - CLEAR \ - "1:\n" \ - " .section .fixup,\"ax\"\n" \ - FIXUP \ - " jump 1b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - TENTRY \ - " .previous" \ - : "=r" (to), "=r" (ret) \ - : "0" (to), "1" (ret) \ - : "memory") - -#define __asm_clear_1(to, ret) \ - __asm_clear(to, ret, \ - " clear.b [%0+]\n2:\n", \ - "3: addq 1,%1\n", \ - " .dword 2b,3b\n") - -#define __asm_clear_2(to, ret) \ - __asm_clear(to, ret, \ - " clear.w [%0+]\n2:\n", \ - "3: addq 2,%1\n", \ - " .dword 2b,3b\n") - -#define __asm_clear_3(to, ret) \ - __asm_clear(to, ret, \ - " clear.w [%0+]\n" \ - "2: clear.b [%0+]\n3:\n", \ - "4: addq 2,%1\n" \ - "5: addq 1,%1\n", \ - " .dword 2b,4b\n" \ - " .dword 3b,5b\n") - -#define __asm_clear_4x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear(to, ret, \ - " clear.d [%0+]\n2:\n" CLEAR, \ - "3: addq 4,%1\n" FIXUP, \ - " .dword 2b,3b\n" TENTRY) - -#define __asm_clear_4(to, ret) \ - __asm_clear_4x_cont(to, ret, "", "", "") - -#define __asm_clear_8x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear_4x_cont(to, ret, \ - " clear.d [%0+]\n4:\n" CLEAR, \ - "5: addq 4,%1\n" FIXUP, \ - " .dword 4b,5b\n" TENTRY) - -#define __asm_clear_8(to, ret) \ - __asm_clear_8x_cont(to, ret, "", "", "") - -#define __asm_clear_12x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear_8x_cont(to, ret, \ - " clear.d [%0+]\n6:\n" CLEAR, \ - "7: addq 4,%1\n" FIXUP, \ - " .dword 6b,7b\n" TENTRY) - -#define __asm_clear_12(to, ret) \ - __asm_clear_12x_cont(to, ret, "", "", "") - -#define __asm_clear_16x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear_12x_cont(to, ret, \ - " clear.d [%0+]\n8:\n" CLEAR, \ - "9: addq 4,%1\n" FIXUP, \ - " .dword 8b,9b\n" TENTRY) - -#define __asm_clear_16(to, ret) \ - __asm_clear_16x_cont(to, ret, "", "", "") - -#define __asm_clear_20x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear_16x_cont(to, ret, \ - " clear.d [%0+]\n10:\n" CLEAR, \ - "11: addq 4,%1\n" FIXUP, \ - " .dword 10b,11b\n" TENTRY) - -#define __asm_clear_20(to, ret) \ - __asm_clear_20x_cont(to, ret, "", "", "") - -#define __asm_clear_24x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear_20x_cont(to, ret, \ - " clear.d [%0+]\n12:\n" CLEAR, \ - "13: addq 4,%1\n" FIXUP, \ - " .dword 12b,13b\n" TENTRY) - -#define __asm_clear_24(to, ret) \ - __asm_clear_24x_cont(to, ret, "", "", "") - -/* - * Return the size of a string (including the ending 0) - * - * Return length of string in userspace including terminating 0 - * or 0 for error. Return a value greater than N if too long. - */ - -static inline long -strnlen_user(const char *s, long n) -{ - long res, tmp1; - - if (!access_ok(VERIFY_READ, s, 0)) - return 0; - - /* - * This code is deduced from: - * - * tmp1 = n; - * while (tmp1-- > 0 && *s++) - * ; - * - * res = n - tmp1; - * - * (with tweaks). - */ - - __asm__ __volatile__ ( - " move.d %1,$r9\n" - "0:\n" - " ble 1f\n" - " subq 1,$r9\n" - - " test.b [%0+]\n" - " bne 0b\n" - " test.d $r9\n" - "1:\n" - " move.d %1,%0\n" - " sub.d $r9,%0\n" - "2:\n" - " .section .fixup,\"ax\"\n" - - "3: clear.d %0\n" - " jump 2b\n" - - /* There's one address for a fault at the first move, and - two possible PC values for a fault at the second move, - being a delay-slot filler. However, the branch-target - for the second move is the same as the first address. - Just so you don't get confused... */ - " .previous\n" - " .section __ex_table,\"a\"\n" - " .dword 0b,3b\n" - " .dword 1b,3b\n" - " .previous\n" - : "=r" (res), "=r" (tmp1) - : "0" (s), "1" (n) - : "r9"); - - return res; -} - -#endif diff --git a/include/asm-cris/arch-v10/unistd.h b/include/asm-cris/arch-v10/unistd.h deleted file mode 100644 index d1a38b9e6264..000000000000 --- a/include/asm-cris/arch-v10/unistd.h +++ /dev/null @@ -1,148 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_UNISTD_H_ -#define _ASM_CRIS_ARCH_UNISTD_H_ - -/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */ -/* - * Don't remove the .ifnc tests; they are an insurance against - * any hard-to-spot gcc register allocation bugs. - */ -#define _syscall0(type,name) \ -type name(void) \ -{ \ - register long __a __asm__ ("r10"); \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1,$r10$r9\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_)); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall1(type,name,type1,arg1) \ -type name(type1 arg1) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1,$r10$r9\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a)); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall2(type,name,type1,arg1,type2,arg2) \ -type name(type1 arg1,type2 arg2) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __b __asm__ ("r11") = (long) arg2; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1%3,$r10$r9$r11\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b)); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \ -type name(type1 arg1,type2 arg2,type3 arg3) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __b __asm__ ("r11") = (long) arg2; \ - register long __c __asm__ ("r12") = (long) arg3; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1%3%4,$r10$r9$r11$r12\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), "r" (__c)); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ -type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __b __asm__ ("r11") = (long) arg2; \ - register long __c __asm__ ("r12") = (long) arg3; \ - register long __d __asm__ ("r13") = (long) arg4; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), \ - "r" (__c), "r" (__d)); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ - type5,arg5) \ -type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __b __asm__ ("r11") = (long) arg2; \ - register long __c __asm__ ("r12") = (long) arg3; \ - register long __d __asm__ ("r13") = (long) arg4; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "move %6,$mof\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), \ - "r" (__c), "r" (__d), "g" (arg5)); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ - type5,arg5,type6,arg6) \ -type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __b __asm__ ("r11") = (long) arg2; \ - register long __c __asm__ ("r12") = (long) arg3; \ - register long __d __asm__ ("r13") = (long) arg4; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "move %6,$mof\n\tmove %7,$srp\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), \ - "r" (__c), "r" (__d), "g" (arg5), "g" (arg6)\ - : "srp"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#endif diff --git a/include/asm-cris/arch-v10/user.h b/include/asm-cris/arch-v10/user.h deleted file mode 100644 index 9303ea77c915..000000000000 --- a/include/asm-cris/arch-v10/user.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef __ASM_CRIS_ARCH_USER_H -#define __ASM_CRIS_ARCH_USER_H - -/* User mode registers, used for core dumps. In order to keep ELF_NGREG - sensible we let all registers be 32 bits. The csr registers are included - for future use. */ -struct user_regs_struct { - unsigned long r0; /* General registers. */ - unsigned long r1; - unsigned long r2; - unsigned long r3; - unsigned long r4; - unsigned long r5; - unsigned long r6; - unsigned long r7; - unsigned long r8; - unsigned long r9; - unsigned long r10; - unsigned long r11; - unsigned long r12; - unsigned long r13; - unsigned long sp; /* Stack pointer. */ - unsigned long pc; /* Program counter. */ - unsigned long p0; /* Constant zero (only 8 bits). */ - unsigned long vr; /* Version register (only 8 bits). */ - unsigned long p2; /* Reserved. */ - unsigned long p3; /* Reserved. */ - unsigned long p4; /* Constant zero (only 16 bits). */ - unsigned long ccr; /* Condition code register (only 16 bits). */ - unsigned long p6; /* Reserved. */ - unsigned long mof; /* Multiply overflow register. */ - unsigned long p8; /* Constant zero. */ - unsigned long ibr; /* Not accessible. */ - unsigned long irp; /* Not accessible. */ - unsigned long srp; /* Subroutine return pointer. */ - unsigned long bar; /* Not accessible. */ - unsigned long dccr; /* Dword condition code register. */ - unsigned long brp; /* Not accessible. */ - unsigned long usp; /* User-mode stack pointer. Same as sp when - in user mode. */ - unsigned long csrinstr; /* Internal status registers. */ - unsigned long csraddr; - unsigned long csrdata; -}; - -#endif diff --git a/include/asm-cris/arch-v32/Kbuild b/include/asm-cris/arch-v32/Kbuild deleted file mode 100644 index 35f2fc4f993e..000000000000 --- a/include/asm-cris/arch-v32/Kbuild +++ /dev/null @@ -1,2 +0,0 @@ -header-y += user.h -header-y += cryptocop.h diff --git a/include/asm-cris/arch-v32/arbiter.h b/include/asm-cris/arch-v32/arbiter.h deleted file mode 100644 index 081a911d7af1..000000000000 --- a/include/asm-cris/arch-v32/arbiter.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_ARBITER_H -#define _ASM_CRIS_ARCH_ARBITER_H - -#define EXT_REGION 0 -#define INT_REGION 1 - -typedef void (watch_callback)(void); - -enum -{ - arbiter_all_dmas = 0x3ff, - arbiter_cpu = 0xc00, - arbiter_all_clients = 0x3fff -}; - -enum -{ - arbiter_all_read = 0x55, - arbiter_all_write = 0xaa, - arbiter_all_accesses = 0xff -}; - -int crisv32_arbiter_allocate_bandwidth(int client, int region, - unsigned long bandwidth); -int crisv32_arbiter_watch(unsigned long start, unsigned long size, - unsigned long clients, unsigned long accesses, - watch_callback* cb); -int crisv32_arbiter_unwatch(int id); - -#endif diff --git a/include/asm-cris/arch-v32/atomic.h b/include/asm-cris/arch-v32/atomic.h deleted file mode 100644 index 852ceff8013f..000000000000 --- a/include/asm-cris/arch-v32/atomic.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef __ASM_CRIS_ARCH_ATOMIC__ -#define __ASM_CRIS_ARCH_ATOMIC__ - -#include - -extern void cris_spin_unlock(void *l, int val); -extern void cris_spin_lock(void *l); -extern int cris_spin_trylock(void* l); - -#ifndef CONFIG_SMP -#define cris_atomic_save(addr, flags) local_irq_save(flags); -#define cris_atomic_restore(addr, flags) local_irq_restore(flags); -#else - -extern spinlock_t cris_atomic_locks[]; -#define LOCK_COUNT 128 -#define HASH_ADDR(a) (((int)a) & 127) - -#define cris_atomic_save(addr, flags) \ - local_irq_save(flags); \ - cris_spin_lock((void *)&cris_atomic_locks[HASH_ADDR(addr)].raw_lock.slock); - -#define cris_atomic_restore(addr, flags) \ - { \ - spinlock_t *lock = (void*)&cris_atomic_locks[HASH_ADDR(addr)]; \ - __asm__ volatile ("move.d %1,%0" \ - : "=m" (lock->raw_lock.slock) \ - : "r" (1) \ - : "memory"); \ - local_irq_restore(flags); \ - } - -#endif - -#endif - diff --git a/include/asm-cris/arch-v32/bitops.h b/include/asm-cris/arch-v32/bitops.h deleted file mode 100644 index 147689d6b624..000000000000 --- a/include/asm-cris/arch-v32/bitops.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_BITOPS_H -#define _ASM_CRIS_ARCH_BITOPS_H - -/* - * Helper functions for the core of the ff[sz] functions. They compute the - * number of leading zeroes of a bits-in-byte, byte-in-word and - * word-in-dword-swapped number. They differ in that the first function also - * inverts all bits in the input. - */ - -static inline unsigned long -cris_swapnwbrlz(unsigned long w) -{ - unsigned long res; - - __asm__ __volatile__ ("swapnwbr %0\n\t" - "lz %0,%0" - : "=r" (res) : "0" (w)); - - return res; -} - -static inline unsigned long -cris_swapwbrlz(unsigned long w) -{ - unsigned long res; - - __asm__ __volatile__ ("swapwbr %0\n\t" - "lz %0,%0" - : "=r" (res) : "0" (w)); - - return res; -} - -/* - * Find First Zero in word. Undefined if no zero exist, so the caller should - * check against ~0 first. - */ -static inline unsigned long -ffz(unsigned long w) -{ - return cris_swapnwbrlz(w); -} - -/* - * Find First Set bit in word. Undefined if no 1 exist, so the caller - * should check against 0 first. - */ -static inline unsigned long -__ffs(unsigned long w) -{ - return cris_swapnwbrlz(~w); -} - -/* - * Find First Bit that is set. - */ -static inline unsigned long -kernel_ffs(unsigned long w) -{ - return w ? cris_swapwbrlz (w) + 1 : 0; -} - -#endif /* _ASM_CRIS_ARCH_BITOPS_H */ diff --git a/include/asm-cris/arch-v32/bug.h b/include/asm-cris/arch-v32/bug.h deleted file mode 100644 index 0f211e135248..000000000000 --- a/include/asm-cris/arch-v32/bug.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __ASM_CRISv32_ARCH_BUG_H -#define __ASM_CRISv32_ARCH_BUG_H - -#include - -#ifdef CONFIG_BUG -#ifdef CONFIG_DEBUG_BUGVERBOSE -/* - * The penalty for the in-band code path will be the size of break 14. - * All other stuff is done out-of-band with exception handlers. - */ -#define BUG() \ - __asm__ __volatile__ ("0: break 14\n\t" \ - ".section .fixup,\"ax\"\n" \ - "1:\n\t" \ - "move.d %0, $r10\n\t" \ - "move.d %1, $r11\n\t" \ - "jump do_BUG\n\t" \ - "nop\n\t" \ - ".previous\n\t" \ - ".section __ex_table,\"a\"\n\t" \ - ".dword 0b, 1b\n\t" \ - ".previous\n\t" \ - : : "ri" (__FILE__), "i" (__LINE__)) -#else -#define BUG() __asm__ __volatile__ ("break 14\n\t") -#endif - -#define HAVE_ARCH_BUG -#endif - -#include -#endif diff --git a/include/asm-cris/arch-v32/byteorder.h b/include/asm-cris/arch-v32/byteorder.h deleted file mode 100644 index 6ef8fb4a35f2..000000000000 --- a/include/asm-cris/arch-v32/byteorder.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_BYTEORDER_H -#define _ASM_CRIS_ARCH_BYTEORDER_H - -#include - -static inline __const__ __u32 -___arch__swab32(__u32 x) -{ - __asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x)); - return (x); -} - -static inline __const__ __u16 -___arch__swab16(__u16 x) -{ - __asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x)); - return (x); -} - -#endif /* _ASM_CRIS_ARCH_BYTEORDER_H */ diff --git a/include/asm-cris/arch-v32/cache.h b/include/asm-cris/arch-v32/cache.h deleted file mode 100644 index b3d752dfe15b..000000000000 --- a/include/asm-cris/arch-v32/cache.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_CACHE_H -#define _ASM_CRIS_ARCH_CACHE_H - -#include - -/* A cache-line is 32 bytes. */ -#define L1_CACHE_BYTES 32 -#define L1_CACHE_SHIFT 5 - -void flush_dma_list(dma_descr_data *descr); -void flush_dma_descr(dma_descr_data *descr, int flush_buf); - -#define flush_dma_context(c) \ - flush_dma_list(phys_to_virt((c)->saved_data)); - -void cris_flush_cache_range(void *buf, unsigned long len); -void cris_flush_cache(void); - -#endif /* _ASM_CRIS_ARCH_CACHE_H */ diff --git a/include/asm-cris/arch-v32/checksum.h b/include/asm-cris/arch-v32/checksum.h deleted file mode 100644 index e5dcfce6e0dc..000000000000 --- a/include/asm-cris/arch-v32/checksum.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_CHECKSUM_H -#define _ASM_CRIS_ARCH_CHECKSUM_H - -/* - * Check values used in TCP/UDP headers. - * - * The gain of doing this in assembler instead of C, is that C doesn't - * generate carry-additions for the 32-bit components of the - * checksum. Which means it would be necessary to split all those into - * 16-bit components and then add. - */ -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, unsigned short proto, __wsum sum) -{ - __wsum res; - - __asm__ __volatile__ ("add.d %2, %0\n\t" - "addc %3, %0\n\t" - "addc %4, %0\n\t" - "addc 0, %0\n\t" - : "=r" (res) - : "0" (sum), "r" (daddr), "r" (saddr), \ - "r" ((len + proto) << 8)); - - return res; -} - -#endif /* _ASM_CRIS_ARCH_CHECKSUM_H */ diff --git a/include/asm-cris/arch-v32/cryptocop.h b/include/asm-cris/arch-v32/cryptocop.h deleted file mode 100644 index dfa1f66fb987..000000000000 --- a/include/asm-cris/arch-v32/cryptocop.h +++ /dev/null @@ -1,272 +0,0 @@ -/* - * The device /dev/cryptocop is accessible using this driver using - * CRYPTOCOP_MAJOR (254) and minor number 0. - */ - -#ifndef CRYPTOCOP_H -#define CRYPTOCOP_H - -#include - - -#define CRYPTOCOP_SESSION_ID_NONE (0) - -typedef unsigned long long int cryptocop_session_id; - -/* cryptocop ioctls */ -#define ETRAXCRYPTOCOP_IOCTYPE (250) - -#define CRYPTOCOP_IO_CREATE_SESSION _IOWR(ETRAXCRYPTOCOP_IOCTYPE, 1, struct strcop_session_op) -#define CRYPTOCOP_IO_CLOSE_SESSION _IOW(ETRAXCRYPTOCOP_IOCTYPE, 2, struct strcop_session_op) -#define CRYPTOCOP_IO_PROCESS_OP _IOWR(ETRAXCRYPTOCOP_IOCTYPE, 3, struct strcop_crypto_op) -#define CRYPTOCOP_IO_MAXNR (3) - -typedef enum { - cryptocop_cipher_des = 0, - cryptocop_cipher_3des = 1, - cryptocop_cipher_aes = 2, - cryptocop_cipher_m2m = 3, /* mem2mem is essentially a NULL cipher with blocklength=1 */ - cryptocop_cipher_none -} cryptocop_cipher_type; - -typedef enum { - cryptocop_digest_sha1 = 0, - cryptocop_digest_md5 = 1, - cryptocop_digest_none -} cryptocop_digest_type; - -typedef enum { - cryptocop_csum_le = 0, - cryptocop_csum_be = 1, - cryptocop_csum_none -} cryptocop_csum_type; - -typedef enum { - cryptocop_cipher_mode_ecb = 0, - cryptocop_cipher_mode_cbc, - cryptocop_cipher_mode_none -} cryptocop_cipher_mode; - -typedef enum { - cryptocop_3des_eee = 0, - cryptocop_3des_eed = 1, - cryptocop_3des_ede = 2, - cryptocop_3des_edd = 3, - cryptocop_3des_dee = 4, - cryptocop_3des_ded = 5, - cryptocop_3des_dde = 6, - cryptocop_3des_ddd = 7 -} cryptocop_3des_mode; - -/* Usermode accessible (ioctl) operations. */ -struct strcop_session_op{ - cryptocop_session_id ses_id; - - cryptocop_cipher_type cipher; /* AES, DES, 3DES, m2m, none */ - - cryptocop_cipher_mode cmode; /* ECB, CBC, none */ - cryptocop_3des_mode des3_mode; - - cryptocop_digest_type digest; /* MD5, SHA1, none */ - - cryptocop_csum_type csum; /* BE, LE, none */ - - unsigned char *key; - size_t keylen; -}; - -#define CRYPTOCOP_CSUM_LENGTH (2) -#define CRYPTOCOP_MAX_DIGEST_LENGTH (20) /* SHA-1 20, MD5 16 */ -#define CRYPTOCOP_MAX_IV_LENGTH (16) /* (3)DES==8, AES == 16 */ -#define CRYPTOCOP_MAX_KEY_LENGTH (32) - -struct strcop_crypto_op{ - cryptocop_session_id ses_id; - - /* Indata. */ - unsigned char *indata; - size_t inlen; /* Total indata length. */ - - /* Cipher configuration. */ - unsigned char do_cipher:1; - unsigned char decrypt:1; /* 1 == decrypt, 0 == encrypt */ - unsigned char cipher_explicit:1; - size_t cipher_start; - size_t cipher_len; - /* cipher_iv is used if do_cipher and cipher_explicit and the cipher - mode is CBC. The length is controlled by the type of cipher, - e.g. DES/3DES 8 octets and AES 16 octets. */ - unsigned char cipher_iv[CRYPTOCOP_MAX_IV_LENGTH]; - /* Outdata. */ - unsigned char *cipher_outdata; - size_t cipher_outlen; - - /* digest configuration. */ - unsigned char do_digest:1; - size_t digest_start; - size_t digest_len; - /* Outdata. The actual length is determined by the type of the digest. */ - unsigned char digest[CRYPTOCOP_MAX_DIGEST_LENGTH]; - - /* Checksum configuration. */ - unsigned char do_csum:1; - size_t csum_start; - size_t csum_len; - /* Outdata. */ - unsigned char csum[CRYPTOCOP_CSUM_LENGTH]; -}; - - - -#ifdef __KERNEL__ - -/********** The API to use from inside the kernel. ************/ - -#include - -typedef enum { - cryptocop_alg_csum = 0, - cryptocop_alg_mem2mem, - cryptocop_alg_md5, - cryptocop_alg_sha1, - cryptocop_alg_des, - cryptocop_alg_3des, - cryptocop_alg_aes, - cryptocop_no_alg, -} cryptocop_algorithm; - -typedef u8 cryptocop_tfrm_id; - - -struct cryptocop_operation; - -typedef void (cryptocop_callback)(struct cryptocop_operation*, void*); - -struct cryptocop_transform_init { - cryptocop_algorithm alg; - /* Keydata for ciphers. */ - unsigned char key[CRYPTOCOP_MAX_KEY_LENGTH]; - unsigned int keylen; - cryptocop_cipher_mode cipher_mode; - cryptocop_3des_mode tdes_mode; - cryptocop_csum_type csum_mode; /* cryptocop_csum_none is not allowed when alg==cryptocop_alg_csum */ - - cryptocop_tfrm_id tid; /* Locally unique in session; assigned by user, checked by driver. */ - struct cryptocop_transform_init *next; -}; - - -typedef enum { - cryptocop_source_dma = 0, - cryptocop_source_des, - cryptocop_source_3des, - cryptocop_source_aes, - cryptocop_source_md5, - cryptocop_source_sha1, - cryptocop_source_csum, - cryptocop_source_none, -} cryptocop_source; - - -struct cryptocop_desc_cfg { - cryptocop_tfrm_id tid; - cryptocop_source src; - unsigned int last:1; /* Last use of this transform in the operation. Will push outdata when encountered. */ - struct cryptocop_desc_cfg *next; -}; - -struct cryptocop_desc { - size_t length; - struct cryptocop_desc_cfg *cfg; - struct cryptocop_desc *next; -}; - - -/* Flags for cryptocop_tfrm_cfg */ -#define CRYPTOCOP_NO_FLAG (0x00) -#define CRYPTOCOP_ENCRYPT (0x01) -#define CRYPTOCOP_DECRYPT (0x02) -#define CRYPTOCOP_EXPLICIT_IV (0x04) - -struct cryptocop_tfrm_cfg { - cryptocop_tfrm_id tid; - - unsigned int flags; /* DECRYPT, ENCRYPT, EXPLICIT_IV */ - - /* CBC initialisation vector for cihers. */ - u8 iv[CRYPTOCOP_MAX_IV_LENGTH]; - - /* The position in output where to write the transform output. The order - in which the driver writes the output is unspecified, hence if several - transforms write on the same positions in the output the result is - unspecified. */ - size_t inject_ix; - - struct cryptocop_tfrm_cfg *next; -}; - - - -struct cryptocop_dma_list_operation{ - /* The consumer can provide DMA lists to send to the co-processor. 'use_dmalists' in - struct cryptocop_operation must be set for the driver to use them. outlist, - out_data_buf, inlist and in_data_buf must all be physical addresses since they will - be loaded to DMA . */ - dma_descr_data *outlist; /* Out from memory to the co-processor. */ - char *out_data_buf; - dma_descr_data *inlist; /* In from the co-processor to memory. */ - char *in_data_buf; - - cryptocop_3des_mode tdes_mode; - cryptocop_csum_type csum_mode; -}; - - -struct cryptocop_tfrm_operation{ - /* Operation configuration, if not 'use_dmalists' is set. */ - struct cryptocop_tfrm_cfg *tfrm_cfg; - struct cryptocop_desc *desc; - - struct iovec *indata; - size_t incount; - size_t inlen; /* Total inlength. */ - - struct iovec *outdata; - size_t outcount; - size_t outlen; /* Total outlength. */ -}; - - -struct cryptocop_operation { - cryptocop_callback *cb; - void *cb_data; - - cryptocop_session_id sid; - - /* The status of the operation when returned to consumer. */ - int operation_status; /* 0, -EAGAIN */ - - /* Flags */ - unsigned int use_dmalists:1; /* Use outlist and inlist instead of the desc/tfrm_cfg configuration. */ - unsigned int in_interrupt:1; /* Set if inserting job from interrupt context. */ - unsigned int fast_callback:1; /* Set if fast callback wanted, i.e. from interrupt context. */ - - union{ - struct cryptocop_dma_list_operation list_op; - struct cryptocop_tfrm_operation tfrm_op; - }; -}; - - -int cryptocop_new_session(cryptocop_session_id *sid, struct cryptocop_transform_init *tinit, int alloc_flag); -int cryptocop_free_session(cryptocop_session_id sid); - -int cryptocop_job_queue_insert_csum(struct cryptocop_operation *operation); - -int cryptocop_job_queue_insert_crypto(struct cryptocop_operation *operation); - -int cryptocop_job_queue_insert_user_job(struct cryptocop_operation *operation); - -#endif /* __KERNEL__ */ - -#endif /* CRYPTOCOP_H */ diff --git a/include/asm-cris/arch-v32/delay.h b/include/asm-cris/arch-v32/delay.h deleted file mode 100644 index e9fda03810a9..000000000000 --- a/include/asm-cris/arch-v32/delay.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_DELAY_H -#define _ASM_CRIS_ARCH_DELAY_H - -extern void cris_delay10ns(u32 n10ns); -#define udelay(u) cris_delay10ns((u)*100) -#define ndelay(n) cris_delay10ns(((n)+9)/10) - -/* - * Not used anymore for udelay or ndelay. Referenced by - * e.g. init/calibrate.c. All other references are likely bugs; - * should be replaced by mdelay, udelay or ndelay. - */ - -static inline void -__delay(int loops) -{ - __asm__ __volatile__ ( - "move.d %0, $r9\n\t" - "beq 2f\n\t" - "subq 1, $r9\n\t" - "1:\n\t" - "bne 1b\n\t" - "subq 1, $r9\n" - "2:" - : : "g" (loops) : "r9"); -} - -#endif /* _ASM_CRIS_ARCH_DELAY_H */ diff --git a/include/asm-cris/arch-v32/dma.h b/include/asm-cris/arch-v32/dma.h deleted file mode 100644 index 3674081389fd..000000000000 --- a/include/asm-cris/arch-v32/dma.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef _ASM_ARCH_CRIS_DMA_H -#define _ASM_ARCH_CRIS_DMA_H - -/* Defines for using and allocating dma channels. */ - -#define MAX_DMA_CHANNELS 10 - -#define NETWORK_ETH0_TX_DMA_NBR 0 /* Ethernet 0 out. */ -#define NETWORK_ETH0 RX_DMA_NBR 1 /* Ethernet 0 in. */ - -#define IO_PROC_DMA0_TX_DMA_NBR 2 /* IO processor DMA0 out. */ -#define IO_PROC_DMA0_RX_DMA_NBR 3 /* IO processor DMA0 in. */ - -#define ATA_TX_DMA_NBR 2 /* ATA interface out. */ -#define ATA_RX_DMA_NBR 3 /* ATA interface in. */ - -#define ASYNC_SER2_TX_DMA_NBR 2 /* Asynchronous serial port 2 out. */ -#define ASYNC_SER2_RX_DMA_NBR 3 /* Asynchronous serial port 2 in. */ - -#define IO_PROC_DMA1_TX_DMA_NBR 4 /* IO processor DMA1 out. */ -#define IO_PROC_DMA1_RX_DMA_NBR 5 /* IO processor DMA1 in. */ - -#define ASYNC_SER1_TX_DMA_NBR 4 /* Asynchronous serial port 1 out. */ -#define ASYNC_SER1_RX_DMA_NBR 5 /* Asynchronous serial port 1 in. */ - -#define SYNC_SER0_TX_DMA_NBR 4 /* Synchronous serial port 0 out. */ -#define SYNC_SER0_RX_DMA_NBR 5 /* Synchronous serial port 0 in. */ - -#define EXTDMA0_TX_DMA_NBR 6 /* External DMA 0 out. */ -#define EXTDMA1_RX_DMA_NBR 7 /* External DMA 1 in. */ - -#define ASYNC_SER0_TX_DMA_NBR 6 /* Asynchronous serial port 0 out. */ -#define ASYNC_SER0_RX_DMA_NBR 7 /* Asynchronous serial port 0 in. */ - -#define SYNC_SER1_TX_DMA_NBR 6 /* Synchronous serial port 1 out. */ -#define SYNC_SER1_RX_DMA_NBR 7 /* Synchronous serial port 1 in. */ - -#define NETWORK_ETH1_TX_DMA_NBR 6 /* Ethernet 1 out. */ -#define NETWORK_ETH1_RX_DMA_NBR 7 /* Ethernet 1 in. */ - -#define EXTDMA2_TX_DMA_NBR 8 /* External DMA 2 out. */ -#define EXTDMA3_RX_DMA_NBR 9 /* External DMA 3 in. */ - -#define STRCOP_TX_DMA_NBR 8 /* Stream co-processor out. */ -#define STRCOP_RX_DMA_NBR 9 /* Stream co-processor in. */ - -#define ASYNC_SER3_TX_DMA_NBR 8 /* Asynchronous serial port 3 out. */ -#define ASYNC_SER3_RX_DMA_NBR 9 /* Asynchronous serial port 3 in. */ - -enum dma_owner -{ - dma_eth0, - dma_eth1, - dma_iop0, - dma_iop1, - dma_ser0, - dma_ser1, - dma_ser2, - dma_ser3, - dma_sser0, - dma_sser1, - dma_ata, - dma_strp, - dma_ext0, - dma_ext1, - dma_ext2, - dma_ext3 -}; - -int crisv32_request_dma(unsigned int dmanr, const char * device_id, - unsigned options, unsigned bandwidth, enum dma_owner owner); -void crisv32_free_dma(unsigned int dmanr); - -/* Masks used by crisv32_request_dma options: */ -#define DMA_VERBOSE_ON_ERROR 1 -#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR) -#define DMA_INT_MEM 4 - -#endif /* _ASM_ARCH_CRIS_DMA_H */ diff --git a/include/asm-cris/arch-v32/elf.h b/include/asm-cris/arch-v32/elf.h deleted file mode 100644 index 1324e505a4d8..000000000000 --- a/include/asm-cris/arch-v32/elf.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef _ASM_CRIS_ELF_H -#define _ASM_CRIS_ELF_H - -#define ELF_CORE_EFLAGS EF_CRIS_VARIANT_V32 - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) \ - ((x)->e_machine == EM_CRIS \ - && ((((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_V32 \ - || (((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_COMMON_V10_V32)))) - -/* CRISv32 ELF register definitions. */ - -#include - -/* Explicitly zero out registers to increase determinism. */ -#define ELF_PLAT_INIT(_r, load_addr) do { \ - (_r)->r13 = 0; (_r)->r12 = 0; (_r)->r11 = 0; (_r)->r10 = 0; \ - (_r)->r9 = 0; (_r)->r8 = 0; (_r)->r7 = 0; (_r)->r6 = 0; \ - (_r)->r5 = 0; (_r)->r4 = 0; (_r)->r3 = 0; (_r)->r2 = 0; \ - (_r)->r1 = 0; (_r)->r0 = 0; (_r)->mof = 0; (_r)->srp = 0; \ - (_r)->acr = 0; \ -} while (0) - -/* - * An executable for which elf_read_implies_exec() returns TRUE will - * have the READ_IMPLIES_EXEC personality flag set automatically. - */ -#define elf_read_implies_exec_binary(ex, have_pt_gnu_stack) (!(have_pt_gnu_stack)) - -/* - * This is basically a pt_regs with the additional definition - * of the stack pointer since it's needed in a core dump. - * pr_regs is a elf_gregset_t and should be filled according - * to the layout of user_regs_struct. - */ -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ - pr_reg[0] = regs->r0; \ - pr_reg[1] = regs->r1; \ - pr_reg[2] = regs->r2; \ - pr_reg[3] = regs->r3; \ - pr_reg[4] = regs->r4; \ - pr_reg[5] = regs->r5; \ - pr_reg[6] = regs->r6; \ - pr_reg[7] = regs->r7; \ - pr_reg[8] = regs->r8; \ - pr_reg[9] = regs->r9; \ - pr_reg[10] = regs->r10; \ - pr_reg[11] = regs->r11; \ - pr_reg[12] = regs->r12; \ - pr_reg[13] = regs->r13; \ - pr_reg[14] = rdusp(); /* SP */ \ - pr_reg[15] = regs->acr; /* ACR */ \ - pr_reg[16] = 0; /* BZ */ \ - pr_reg[17] = rdvr(); /* VR */ \ - pr_reg[18] = 0; /* PID */ \ - pr_reg[19] = regs->srs; /* SRS */ \ - pr_reg[20] = 0; /* WZ */ \ - pr_reg[21] = regs->exs; /* EXS */ \ - pr_reg[22] = regs->eda; /* EDA */ \ - pr_reg[23] = regs->mof; /* MOF */ \ - pr_reg[24] = 0; /* DZ */ \ - pr_reg[25] = 0; /* EBP */ \ - pr_reg[26] = regs->erp; /* ERP */ \ - pr_reg[27] = regs->srp; /* SRP */ \ - pr_reg[28] = 0; /* NRP */ \ - pr_reg[29] = regs->ccs; /* CCS */ \ - pr_reg[30] = rdusp(); /* USP */ \ - pr_reg[31] = regs->spc; /* SPC */ \ - -#endif /* _ASM_CRIS_ELF_H */ diff --git a/include/asm-cris/arch-v32/hwregs/Makefile b/include/asm-cris/arch-v32/hwregs/Makefile deleted file mode 100644 index f9a05d2aa061..000000000000 --- a/include/asm-cris/arch-v32/hwregs/Makefile +++ /dev/null @@ -1,186 +0,0 @@ -# Makefile to generate or copy the latest register definitions -# and related datastructures and helpermacros. -# The offical place for these files is at: -RELEASE ?= r1_alfa5 -OFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/ - -# which is updated on each new release. -INCL_ASMFILES = -INCL_FILES = ata_defs.h -INCL_FILES += bif_core_defs.h -INCL_ASMFILES += bif_core_defs_asm.h -INCL_FILES += bif_slave_defs.h -#INCL_FILES += bif_slave_ext_defs.h -INCL_FILES += config_defs.h -INCL_ASMFILES += config_defs_asm.h -INCL_FILES += cpu_vect.h -#INCL_FILES += cris_defs.h -#INCL_FILES += cris_supp_reg.h # In handcrafted supp_reg.h -INCL_FILES += dma.h -INCL_FILES += dma_defs.h -INCL_FILES += eth_defs.h -INCL_FILES += extmem_defs.h -INCL_FILES += gio_defs.h -INCL_ASMFILES += gio_defs_asm.h -INCL_FILES += intr_vect.h -INCL_FILES += intr_vect_defs.h -INCL_ASMFILES += intr_vect_defs_asm.h -INCL_FILES += marb_bp_defs.h -INCL_FILES += marb_defs.h -INCL_ASMFILES += mmu_defs_asm.h -#INCL_FILES += mmu_supp_reg.h # In handcrafted supp_reg.h -#INCL_FILES += par_defs.h # No useful content -INCL_FILES += pinmux_defs.h -INCL_FILES += reg_map.h -INCL_ASMFILES += reg_map_asm.h -INCL_FILES += reg_rdwr.h -INCL_FILES += ser_defs.h -#INCL_FILES += spec_reg.h # In handcrafted supp_reg.h -INCL_FILES += sser_defs.h -INCL_FILES += strcop_defs.h -#INCL_FILES += strcop.h # Where is this? -INCL_FILES += strmux_defs.h -#INCL_FILES += supp_reg.h # Handcrafted instead -INCL_FILES += timer_defs.h - -REGDESC = -REGDESC += $(BASEDIR)/io/ata/rtl/ata_regs.r -REGDESC += $(BASEDIR)/io/bif/rtl/bif_core_regs.r -REGDESC += $(BASEDIR)/io/bif/rtl/bif_slave_regs.r -#REGDESC += $(BASEDIR)/io/bif/sw/bif_slave_ext_regs.r -REGDESC += $(DESIGNDIR)/top/rtl/config_regs.r -REGDESC += $(BASEDIR)/mod/dma_common/rtl/dma_regdes.r -REGDESC += $(BASEDIR)/io/eth/rtl/eth_regs.r -REGDESC += $(BASEDIR)/io/bif/mod/extmem/extmem_regs.r -REGDESC += $(DESIGNDIR)/gio/rtl/gio_regs.r -REGDESC += $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r -REGDESC += $(BASEDIR)/core/memarb/rtl/guinness/marb_top.r -REGDESC += $(BASEDIR)/core/cpu/mmu/doc/mmu_regs.r -#REGDESC += $(BASEDIR)/io/par_port/rtl/par_regs.r -REGDESC += $(BASEDIR)/io/pinmux/rtl/guinness/pinmux_regs.r -REGDESC += $(BASEDIR)/io/ser/rtl/ser_regs.r -REGDESC += $(BASEDIR)/core/strcop/rtl/strcop_regs.r -REGDESC += $(BASEDIR)/io/strmux/rtl/guinness/strmux_regs.r -REGDESC += $(BASEDIR)/io/timer/rtl/timer_regs.r -#REGDESC += $(BASEDIR)/io/usb/usb1_1/rtl/usb_regs.r - - -BASEDIR = /n/asic/design -DESIGNDIR = /n/asic/projects/guinness/design -RDES2C = /n/asic/bin/rdes2c -RDES2C = /n/asic/design/tools/rdesc/rdes2c -RDES2INTR = /n/asic/design/tools/rdesc/rdes2intr -RDES2TXT = /n/asic/design/tools/rdesc/rdes2txt - -## all - Just print help - you probably want to do 'make gen' -all: help - -# Disable implicit rule that may generate deleted files from RCS/ directory. -%.r: - -%.h: - -## help - This help -help: - @grep '^## ' Makefile - -## gen - Generate include files -gen: $(INCL_FILES) $(INCL_ASMFILES) - -ata_defs.h: $(BASEDIR)/io/ata/rtl/ata_regs.r - $(RDES2C) $< -config_defs.h: $(DESIGNDIR)/top/rtl/config_regs.r - $(RDES2C) $< -config_defs_asm.h: $(DESIGNDIR)/top/rtl/config_regs.r - $(RDES2C) -asm $< -# Can't generate cpu_vect.h yet -#cpu_vect.h: $(DESIGNDIR)/top/rtl/cpu_vect.r # ???? -# $(RDES2INTR) $< -cpu_vect.h: $(OFFICIAL_INCDIR)cpu_vect.h - cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ -dma_defs.h: $(BASEDIR)/core/dma/rtl/common/dma_regdes.r - $(RDES2C) $< -$(BASEDIR)/core/dma/sw/dma.h: -dma.h: $(BASEDIR)/core/dma/sw/dma.h - cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ -eth_defs.h: $(BASEDIR)/io/eth/rtl/eth_regs.r - $(RDES2C) $< -extmem_defs.h: $(BASEDIR)/io/bif/mod/extmem/extmem_regs.r - $(RDES2C) $< -gio_defs.h: $(DESIGNDIR)/gio/rtl/gio_regs.r - $(RDES2C) $< -intr_vect_defs.h: $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r - $(RDES2C) $< -intr_vect_defs_asm.h: $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r - $(RDES2C) -asm $< -# Can't generate intr_vect.h yet -#intr_vect.h: $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r -# $(RDES2INTR) $< -intr_vect.h: $(OFFICIAL_INCDIR)intr_vect.h - cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ -mmu_defs_asm.h: $(BASEDIR)/core/cpu/mmu/doc/mmu_regs.r - $(RDES2C) -asm $< -par_defs.h: $(BASEDIR)/io/par_port/rtl/par_regs.r - $(RDES2C) $< - -# From /n/asic/projects/guinness/design/ -reg_map.h: $(DESIGNDIR)/top/rtl/global.rmap $(DESIGNDIR)/top/mod/modreg.rmap - $(RDES2C) -base 0xb0000000 $^ -reg_map_asm.h: $(DESIGNDIR)/top/rtl/global.rmap $(DESIGNDIR)/top/mod/modreg.rmap - $(RDES2C) -base 0xb0000000 -asm -outfile $@ $^ - -reg_rdwr.h: $(DESIGNDIR)/top/sw/include/reg_rdwr.h - cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ - -ser_defs.h: $(BASEDIR)/io/ser/rtl/ser_regs.r - $(RDES2C) $< -strcop_defs.h: $(BASEDIR)/core/strcop/rtl/strcop_regs.r - $(RDES2C) $< -strcop.h: $(BASEDIR)/core/strcop/rtl/strcop.h - cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ -strmux_defs.h: $(BASEDIR)/io/strmux/rtl/guinness/strmux_regs.r - $(RDES2C) $< -timer_defs.h: $(BASEDIR)/io/timer/rtl/timer_regs.r - $(RDES2C) $< -usb_defs.h: $(BASEDIR)/io/usb/usb1_1/rtl/usb_regs.r - $(RDES2C) $< - -## copy - Copy files from official location -copy: - @for HFILE in $(INCL_FILES); do \ - echo " $$HFILE"; \ - cat $(OFFICIAL_INCDIR)$$HFILE | sed -e 's/\$$Id\:/id\:/g' > $$HFILE; \ - done - @for HFILE in $(INCL_ASMFILES); do \ - echo " $$HFILE"; \ - cat $(OFFICIAL_INCDIR)asm/$$HFILE | sed -e 's/\$$Id\:/id\:/g' > $$HFILE; \ - done -## ls_official - List official location -ls_official: - (cd $(OFFICIAL_INCDIR); ls -l *.h ) - -## diff_official - Diff current directory with official location -diff_official: - diff . $(OFFICIAL_INCDIR) - -## doc - Generate .axw files from register description. -doc: $(REGDESC) - for RDES in $^; do \ - $(RDES2TXT) $$RDES; \ - done - -.PHONY: axw -## %.axw - Generate the specified .axw file (doesn't work for all files -## due to inconsistent naming ir .r files. -%.axw: axw - @for RDES in $(REGDESC); do \ - if echo "$$RDES" | grep $* ; then \ - $(RDES2TXT) $$RDES; \ - fi \ - done - -.PHONY: clean -## clean - Remove .h files and .axw files. -clean: - rm -rf $(INCL_FILES) *.axw - diff --git a/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h deleted file mode 100644 index 866191418f9c..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h +++ /dev/null @@ -1,222 +0,0 @@ -#ifndef __ata_defs_asm_h -#define __ata_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/ata/rtl/ata_regs.r - * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp - * last modfied: Mon Apr 11 16:06:25 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/ata_defs_asm.h ../../inst/ata/rtl/ata_regs.r - * id: $Id: ata_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_ctrl0, scope ata, type rw */ -#define reg_ata_rw_ctrl0___pio_hold___lsb 0 -#define reg_ata_rw_ctrl0___pio_hold___width 6 -#define reg_ata_rw_ctrl0___pio_strb___lsb 6 -#define reg_ata_rw_ctrl0___pio_strb___width 6 -#define reg_ata_rw_ctrl0___pio_setup___lsb 12 -#define reg_ata_rw_ctrl0___pio_setup___width 6 -#define reg_ata_rw_ctrl0___dma_hold___lsb 18 -#define reg_ata_rw_ctrl0___dma_hold___width 6 -#define reg_ata_rw_ctrl0___dma_strb___lsb 24 -#define reg_ata_rw_ctrl0___dma_strb___width 6 -#define reg_ata_rw_ctrl0___rst___lsb 30 -#define reg_ata_rw_ctrl0___rst___width 1 -#define reg_ata_rw_ctrl0___rst___bit 30 -#define reg_ata_rw_ctrl0___en___lsb 31 -#define reg_ata_rw_ctrl0___en___width 1 -#define reg_ata_rw_ctrl0___en___bit 31 -#define reg_ata_rw_ctrl0_offset 12 - -/* Register rw_ctrl1, scope ata, type rw */ -#define reg_ata_rw_ctrl1___udma_tcyc___lsb 0 -#define reg_ata_rw_ctrl1___udma_tcyc___width 4 -#define reg_ata_rw_ctrl1___udma_tdvs___lsb 4 -#define reg_ata_rw_ctrl1___udma_tdvs___width 4 -#define reg_ata_rw_ctrl1_offset 16 - -/* Register rw_ctrl2, scope ata, type rw */ -#define reg_ata_rw_ctrl2___data___lsb 0 -#define reg_ata_rw_ctrl2___data___width 16 -#define reg_ata_rw_ctrl2___dma_size___lsb 19 -#define reg_ata_rw_ctrl2___dma_size___width 1 -#define reg_ata_rw_ctrl2___dma_size___bit 19 -#define reg_ata_rw_ctrl2___multi___lsb 20 -#define reg_ata_rw_ctrl2___multi___width 1 -#define reg_ata_rw_ctrl2___multi___bit 20 -#define reg_ata_rw_ctrl2___hsh___lsb 21 -#define reg_ata_rw_ctrl2___hsh___width 2 -#define reg_ata_rw_ctrl2___trf_mode___lsb 23 -#define reg_ata_rw_ctrl2___trf_mode___width 1 -#define reg_ata_rw_ctrl2___trf_mode___bit 23 -#define reg_ata_rw_ctrl2___rw___lsb 24 -#define reg_ata_rw_ctrl2___rw___width 1 -#define reg_ata_rw_ctrl2___rw___bit 24 -#define reg_ata_rw_ctrl2___addr___lsb 25 -#define reg_ata_rw_ctrl2___addr___width 3 -#define reg_ata_rw_ctrl2___cs0___lsb 28 -#define reg_ata_rw_ctrl2___cs0___width 1 -#define reg_ata_rw_ctrl2___cs0___bit 28 -#define reg_ata_rw_ctrl2___cs1___lsb 29 -#define reg_ata_rw_ctrl2___cs1___width 1 -#define reg_ata_rw_ctrl2___cs1___bit 29 -#define reg_ata_rw_ctrl2___sel___lsb 30 -#define reg_ata_rw_ctrl2___sel___width 2 -#define reg_ata_rw_ctrl2_offset 0 - -/* Register rs_stat_data, scope ata, type rs */ -#define reg_ata_rs_stat_data___data___lsb 0 -#define reg_ata_rs_stat_data___data___width 16 -#define reg_ata_rs_stat_data___dav___lsb 16 -#define reg_ata_rs_stat_data___dav___width 1 -#define reg_ata_rs_stat_data___dav___bit 16 -#define reg_ata_rs_stat_data___busy___lsb 17 -#define reg_ata_rs_stat_data___busy___width 1 -#define reg_ata_rs_stat_data___busy___bit 17 -#define reg_ata_rs_stat_data_offset 4 - -/* Register r_stat_data, scope ata, type r */ -#define reg_ata_r_stat_data___data___lsb 0 -#define reg_ata_r_stat_data___data___width 16 -#define reg_ata_r_stat_data___dav___lsb 16 -#define reg_ata_r_stat_data___dav___width 1 -#define reg_ata_r_stat_data___dav___bit 16 -#define reg_ata_r_stat_data___busy___lsb 17 -#define reg_ata_r_stat_data___busy___width 1 -#define reg_ata_r_stat_data___busy___bit 17 -#define reg_ata_r_stat_data_offset 8 - -/* Register rw_trf_cnt, scope ata, type rw */ -#define reg_ata_rw_trf_cnt___cnt___lsb 0 -#define reg_ata_rw_trf_cnt___cnt___width 17 -#define reg_ata_rw_trf_cnt_offset 20 - -/* Register r_stat_misc, scope ata, type r */ -#define reg_ata_r_stat_misc___crc___lsb 0 -#define reg_ata_r_stat_misc___crc___width 16 -#define reg_ata_r_stat_misc_offset 24 - -/* Register rw_intr_mask, scope ata, type rw */ -#define reg_ata_rw_intr_mask___bus0___lsb 0 -#define reg_ata_rw_intr_mask___bus0___width 1 -#define reg_ata_rw_intr_mask___bus0___bit 0 -#define reg_ata_rw_intr_mask___bus1___lsb 1 -#define reg_ata_rw_intr_mask___bus1___width 1 -#define reg_ata_rw_intr_mask___bus1___bit 1 -#define reg_ata_rw_intr_mask___bus2___lsb 2 -#define reg_ata_rw_intr_mask___bus2___width 1 -#define reg_ata_rw_intr_mask___bus2___bit 2 -#define reg_ata_rw_intr_mask___bus3___lsb 3 -#define reg_ata_rw_intr_mask___bus3___width 1 -#define reg_ata_rw_intr_mask___bus3___bit 3 -#define reg_ata_rw_intr_mask_offset 28 - -/* Register rw_ack_intr, scope ata, type rw */ -#define reg_ata_rw_ack_intr___bus0___lsb 0 -#define reg_ata_rw_ack_intr___bus0___width 1 -#define reg_ata_rw_ack_intr___bus0___bit 0 -#define reg_ata_rw_ack_intr___bus1___lsb 1 -#define reg_ata_rw_ack_intr___bus1___width 1 -#define reg_ata_rw_ack_intr___bus1___bit 1 -#define reg_ata_rw_ack_intr___bus2___lsb 2 -#define reg_ata_rw_ack_intr___bus2___width 1 -#define reg_ata_rw_ack_intr___bus2___bit 2 -#define reg_ata_rw_ack_intr___bus3___lsb 3 -#define reg_ata_rw_ack_intr___bus3___width 1 -#define reg_ata_rw_ack_intr___bus3___bit 3 -#define reg_ata_rw_ack_intr_offset 32 - -/* Register r_intr, scope ata, type r */ -#define reg_ata_r_intr___bus0___lsb 0 -#define reg_ata_r_intr___bus0___width 1 -#define reg_ata_r_intr___bus0___bit 0 -#define reg_ata_r_intr___bus1___lsb 1 -#define reg_ata_r_intr___bus1___width 1 -#define reg_ata_r_intr___bus1___bit 1 -#define reg_ata_r_intr___bus2___lsb 2 -#define reg_ata_r_intr___bus2___width 1 -#define reg_ata_r_intr___bus2___bit 2 -#define reg_ata_r_intr___bus3___lsb 3 -#define reg_ata_r_intr___bus3___width 1 -#define reg_ata_r_intr___bus3___bit 3 -#define reg_ata_r_intr_offset 36 - -/* Register r_masked_intr, scope ata, type r */ -#define reg_ata_r_masked_intr___bus0___lsb 0 -#define reg_ata_r_masked_intr___bus0___width 1 -#define reg_ata_r_masked_intr___bus0___bit 0 -#define reg_ata_r_masked_intr___bus1___lsb 1 -#define reg_ata_r_masked_intr___bus1___width 1 -#define reg_ata_r_masked_intr___bus1___bit 1 -#define reg_ata_r_masked_intr___bus2___lsb 2 -#define reg_ata_r_masked_intr___bus2___width 1 -#define reg_ata_r_masked_intr___bus2___bit 2 -#define reg_ata_r_masked_intr___bus3___lsb 3 -#define reg_ata_r_masked_intr___bus3___width 1 -#define reg_ata_r_masked_intr___bus3___bit 3 -#define reg_ata_r_masked_intr_offset 40 - - -/* Constants */ -#define regk_ata_active 0x00000001 -#define regk_ata_byte 0x00000001 -#define regk_ata_data 0x00000001 -#define regk_ata_dma 0x00000001 -#define regk_ata_inactive 0x00000000 -#define regk_ata_no 0x00000000 -#define regk_ata_nodata 0x00000000 -#define regk_ata_pio 0x00000000 -#define regk_ata_rd 0x00000001 -#define regk_ata_reg 0x00000000 -#define regk_ata_rw_ctrl0_default 0x00000000 -#define regk_ata_rw_ctrl2_default 0x00000000 -#define regk_ata_rw_intr_mask_default 0x00000000 -#define regk_ata_udma 0x00000002 -#define regk_ata_word 0x00000000 -#define regk_ata_wr 0x00000000 -#define regk_ata_yes 0x00000001 -#endif /* __ata_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h deleted file mode 100644 index c686cb335621..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h +++ /dev/null @@ -1,319 +0,0 @@ -#ifndef __bif_core_defs_asm_h -#define __bif_core_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_core_regs.r - * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp - * last modfied: Mon Apr 11 16:06:33 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_core_defs_asm.h ../../inst/bif/rtl/bif_core_regs.r - * id: $Id: bif_core_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_grp1_cfg, scope bif_core, type rw */ -#define reg_bif_core_rw_grp1_cfg___lw___lsb 0 -#define reg_bif_core_rw_grp1_cfg___lw___width 6 -#define reg_bif_core_rw_grp1_cfg___ew___lsb 6 -#define reg_bif_core_rw_grp1_cfg___ew___width 3 -#define reg_bif_core_rw_grp1_cfg___zw___lsb 9 -#define reg_bif_core_rw_grp1_cfg___zw___width 3 -#define reg_bif_core_rw_grp1_cfg___aw___lsb 12 -#define reg_bif_core_rw_grp1_cfg___aw___width 2 -#define reg_bif_core_rw_grp1_cfg___dw___lsb 14 -#define reg_bif_core_rw_grp1_cfg___dw___width 2 -#define reg_bif_core_rw_grp1_cfg___ewb___lsb 16 -#define reg_bif_core_rw_grp1_cfg___ewb___width 2 -#define reg_bif_core_rw_grp1_cfg___bw___lsb 18 -#define reg_bif_core_rw_grp1_cfg___bw___width 1 -#define reg_bif_core_rw_grp1_cfg___bw___bit 18 -#define reg_bif_core_rw_grp1_cfg___wr_extend___lsb 19 -#define reg_bif_core_rw_grp1_cfg___wr_extend___width 1 -#define reg_bif_core_rw_grp1_cfg___wr_extend___bit 19 -#define reg_bif_core_rw_grp1_cfg___erc_en___lsb 20 -#define reg_bif_core_rw_grp1_cfg___erc_en___width 1 -#define reg_bif_core_rw_grp1_cfg___erc_en___bit 20 -#define reg_bif_core_rw_grp1_cfg___mode___lsb 21 -#define reg_bif_core_rw_grp1_cfg___mode___width 1 -#define reg_bif_core_rw_grp1_cfg___mode___bit 21 -#define reg_bif_core_rw_grp1_cfg_offset 0 - -/* Register rw_grp2_cfg, scope bif_core, type rw */ -#define reg_bif_core_rw_grp2_cfg___lw___lsb 0 -#define reg_bif_core_rw_grp2_cfg___lw___width 6 -#define reg_bif_core_rw_grp2_cfg___ew___lsb 6 -#define reg_bif_core_rw_grp2_cfg___ew___width 3 -#define reg_bif_core_rw_grp2_cfg___zw___lsb 9 -#define reg_bif_core_rw_grp2_cfg___zw___width 3 -#define reg_bif_core_rw_grp2_cfg___aw___lsb 12 -#define reg_bif_core_rw_grp2_cfg___aw___width 2 -#define reg_bif_core_rw_grp2_cfg___dw___lsb 14 -#define reg_bif_core_rw_grp2_cfg___dw___width 2 -#define reg_bif_core_rw_grp2_cfg___ewb___lsb 16 -#define reg_bif_core_rw_grp2_cfg___ewb___width 2 -#define reg_bif_core_rw_grp2_cfg___bw___lsb 18 -#define reg_bif_core_rw_grp2_cfg___bw___width 1 -#define reg_bif_core_rw_grp2_cfg___bw___bit 18 -#define reg_bif_core_rw_grp2_cfg___wr_extend___lsb 19 -#define reg_bif_core_rw_grp2_cfg___wr_extend___width 1 -#define reg_bif_core_rw_grp2_cfg___wr_extend___bit 19 -#define reg_bif_core_rw_grp2_cfg___erc_en___lsb 20 -#define reg_bif_core_rw_grp2_cfg___erc_en___width 1 -#define reg_bif_core_rw_grp2_cfg___erc_en___bit 20 -#define reg_bif_core_rw_grp2_cfg___mode___lsb 21 -#define reg_bif_core_rw_grp2_cfg___mode___width 1 -#define reg_bif_core_rw_grp2_cfg___mode___bit 21 -#define reg_bif_core_rw_grp2_cfg_offset 4 - -/* Register rw_grp3_cfg, scope bif_core, type rw */ -#define reg_bif_core_rw_grp3_cfg___lw___lsb 0 -#define reg_bif_core_rw_grp3_cfg___lw___width 6 -#define reg_bif_core_rw_grp3_cfg___ew___lsb 6 -#define reg_bif_core_rw_grp3_cfg___ew___width 3 -#define reg_bif_core_rw_grp3_cfg___zw___lsb 9 -#define reg_bif_core_rw_grp3_cfg___zw___width 3 -#define reg_bif_core_rw_grp3_cfg___aw___lsb 12 -#define reg_bif_core_rw_grp3_cfg___aw___width 2 -#define reg_bif_core_rw_grp3_cfg___dw___lsb 14 -#define reg_bif_core_rw_grp3_cfg___dw___width 2 -#define reg_bif_core_rw_grp3_cfg___ewb___lsb 16 -#define reg_bif_core_rw_grp3_cfg___ewb___width 2 -#define reg_bif_core_rw_grp3_cfg___bw___lsb 18 -#define reg_bif_core_rw_grp3_cfg___bw___width 1 -#define reg_bif_core_rw_grp3_cfg___bw___bit 18 -#define reg_bif_core_rw_grp3_cfg___wr_extend___lsb 19 -#define reg_bif_core_rw_grp3_cfg___wr_extend___width 1 -#define reg_bif_core_rw_grp3_cfg___wr_extend___bit 19 -#define reg_bif_core_rw_grp3_cfg___erc_en___lsb 20 -#define reg_bif_core_rw_grp3_cfg___erc_en___width 1 -#define reg_bif_core_rw_grp3_cfg___erc_en___bit 20 -#define reg_bif_core_rw_grp3_cfg___mode___lsb 21 -#define reg_bif_core_rw_grp3_cfg___mode___width 1 -#define reg_bif_core_rw_grp3_cfg___mode___bit 21 -#define reg_bif_core_rw_grp3_cfg___gated_csp0___lsb 24 -#define reg_bif_core_rw_grp3_cfg___gated_csp0___width 2 -#define reg_bif_core_rw_grp3_cfg___gated_csp1___lsb 26 -#define reg_bif_core_rw_grp3_cfg___gated_csp1___width 2 -#define reg_bif_core_rw_grp3_cfg___gated_csp2___lsb 28 -#define reg_bif_core_rw_grp3_cfg___gated_csp2___width 2 -#define reg_bif_core_rw_grp3_cfg___gated_csp3___lsb 30 -#define reg_bif_core_rw_grp3_cfg___gated_csp3___width 2 -#define reg_bif_core_rw_grp3_cfg_offset 8 - -/* Register rw_grp4_cfg, scope bif_core, type rw */ -#define reg_bif_core_rw_grp4_cfg___lw___lsb 0 -#define reg_bif_core_rw_grp4_cfg___lw___width 6 -#define reg_bif_core_rw_grp4_cfg___ew___lsb 6 -#define reg_bif_core_rw_grp4_cfg___ew___width 3 -#define reg_bif_core_rw_grp4_cfg___zw___lsb 9 -#define reg_bif_core_rw_grp4_cfg___zw___width 3 -#define reg_bif_core_rw_grp4_cfg___aw___lsb 12 -#define reg_bif_core_rw_grp4_cfg___aw___width 2 -#define reg_bif_core_rw_grp4_cfg___dw___lsb 14 -#define reg_bif_core_rw_grp4_cfg___dw___width 2 -#define reg_bif_core_rw_grp4_cfg___ewb___lsb 16 -#define reg_bif_core_rw_grp4_cfg___ewb___width 2 -#define reg_bif_core_rw_grp4_cfg___bw___lsb 18 -#define reg_bif_core_rw_grp4_cfg___bw___width 1 -#define reg_bif_core_rw_grp4_cfg___bw___bit 18 -#define reg_bif_core_rw_grp4_cfg___wr_extend___lsb 19 -#define reg_bif_core_rw_grp4_cfg___wr_extend___width 1 -#define reg_bif_core_rw_grp4_cfg___wr_extend___bit 19 -#define reg_bif_core_rw_grp4_cfg___erc_en___lsb 20 -#define reg_bif_core_rw_grp4_cfg___erc_en___width 1 -#define reg_bif_core_rw_grp4_cfg___erc_en___bit 20 -#define reg_bif_core_rw_grp4_cfg___mode___lsb 21 -#define reg_bif_core_rw_grp4_cfg___mode___width 1 -#define reg_bif_core_rw_grp4_cfg___mode___bit 21 -#define reg_bif_core_rw_grp4_cfg___gated_csp4___lsb 26 -#define reg_bif_core_rw_grp4_cfg___gated_csp4___width 2 -#define reg_bif_core_rw_grp4_cfg___gated_csp5___lsb 28 -#define reg_bif_core_rw_grp4_cfg___gated_csp5___width 2 -#define reg_bif_core_rw_grp4_cfg___gated_csp6___lsb 30 -#define reg_bif_core_rw_grp4_cfg___gated_csp6___width 2 -#define reg_bif_core_rw_grp4_cfg_offset 12 - -/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */ -#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___lsb 0 -#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___width 5 -#define reg_bif_core_rw_sdram_cfg_grp0___ca___lsb 5 -#define reg_bif_core_rw_sdram_cfg_grp0___ca___width 3 -#define reg_bif_core_rw_sdram_cfg_grp0___type___lsb 8 -#define reg_bif_core_rw_sdram_cfg_grp0___type___width 1 -#define reg_bif_core_rw_sdram_cfg_grp0___type___bit 8 -#define reg_bif_core_rw_sdram_cfg_grp0___bw___lsb 9 -#define reg_bif_core_rw_sdram_cfg_grp0___bw___width 1 -#define reg_bif_core_rw_sdram_cfg_grp0___bw___bit 9 -#define reg_bif_core_rw_sdram_cfg_grp0___sh___lsb 10 -#define reg_bif_core_rw_sdram_cfg_grp0___sh___width 3 -#define reg_bif_core_rw_sdram_cfg_grp0___wmm___lsb 13 -#define reg_bif_core_rw_sdram_cfg_grp0___wmm___width 1 -#define reg_bif_core_rw_sdram_cfg_grp0___wmm___bit 13 -#define reg_bif_core_rw_sdram_cfg_grp0___sh16___lsb 14 -#define reg_bif_core_rw_sdram_cfg_grp0___sh16___width 1 -#define reg_bif_core_rw_sdram_cfg_grp0___sh16___bit 14 -#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___lsb 15 -#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___width 5 -#define reg_bif_core_rw_sdram_cfg_grp0_offset 16 - -/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */ -#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___lsb 0 -#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___width 5 -#define reg_bif_core_rw_sdram_cfg_grp1___ca___lsb 5 -#define reg_bif_core_rw_sdram_cfg_grp1___ca___width 3 -#define reg_bif_core_rw_sdram_cfg_grp1___type___lsb 8 -#define reg_bif_core_rw_sdram_cfg_grp1___type___width 1 -#define reg_bif_core_rw_sdram_cfg_grp1___type___bit 8 -#define reg_bif_core_rw_sdram_cfg_grp1___bw___lsb 9 -#define reg_bif_core_rw_sdram_cfg_grp1___bw___width 1 -#define reg_bif_core_rw_sdram_cfg_grp1___bw___bit 9 -#define reg_bif_core_rw_sdram_cfg_grp1___sh___lsb 10 -#define reg_bif_core_rw_sdram_cfg_grp1___sh___width 3 -#define reg_bif_core_rw_sdram_cfg_grp1___wmm___lsb 13 -#define reg_bif_core_rw_sdram_cfg_grp1___wmm___width 1 -#define reg_bif_core_rw_sdram_cfg_grp1___wmm___bit 13 -#define reg_bif_core_rw_sdram_cfg_grp1___sh16___lsb 14 -#define reg_bif_core_rw_sdram_cfg_grp1___sh16___width 1 -#define reg_bif_core_rw_sdram_cfg_grp1___sh16___bit 14 -#define reg_bif_core_rw_sdram_cfg_grp1_offset 20 - -/* Register rw_sdram_timing, scope bif_core, type rw */ -#define reg_bif_core_rw_sdram_timing___cl___lsb 0 -#define reg_bif_core_rw_sdram_timing___cl___width 3 -#define reg_bif_core_rw_sdram_timing___rcd___lsb 3 -#define reg_bif_core_rw_sdram_timing___rcd___width 3 -#define reg_bif_core_rw_sdram_timing___rp___lsb 6 -#define reg_bif_core_rw_sdram_timing___rp___width 3 -#define reg_bif_core_rw_sdram_timing___rc___lsb 9 -#define reg_bif_core_rw_sdram_timing___rc___width 2 -#define reg_bif_core_rw_sdram_timing___dpl___lsb 11 -#define reg_bif_core_rw_sdram_timing___dpl___width 2 -#define reg_bif_core_rw_sdram_timing___pde___lsb 13 -#define reg_bif_core_rw_sdram_timing___pde___width 1 -#define reg_bif_core_rw_sdram_timing___pde___bit 13 -#define reg_bif_core_rw_sdram_timing___ref___lsb 14 -#define reg_bif_core_rw_sdram_timing___ref___width 2 -#define reg_bif_core_rw_sdram_timing___cpd___lsb 16 -#define reg_bif_core_rw_sdram_timing___cpd___width 1 -#define reg_bif_core_rw_sdram_timing___cpd___bit 16 -#define reg_bif_core_rw_sdram_timing___sdcke___lsb 17 -#define reg_bif_core_rw_sdram_timing___sdcke___width 1 -#define reg_bif_core_rw_sdram_timing___sdcke___bit 17 -#define reg_bif_core_rw_sdram_timing___sdclk___lsb 18 -#define reg_bif_core_rw_sdram_timing___sdclk___width 1 -#define reg_bif_core_rw_sdram_timing___sdclk___bit 18 -#define reg_bif_core_rw_sdram_timing_offset 24 - -/* Register rw_sdram_cmd, scope bif_core, type rw */ -#define reg_bif_core_rw_sdram_cmd___cmd___lsb 0 -#define reg_bif_core_rw_sdram_cmd___cmd___width 3 -#define reg_bif_core_rw_sdram_cmd___mrs_data___lsb 3 -#define reg_bif_core_rw_sdram_cmd___mrs_data___width 15 -#define reg_bif_core_rw_sdram_cmd_offset 28 - -/* Register rs_sdram_ref_stat, scope bif_core, type rs */ -#define reg_bif_core_rs_sdram_ref_stat___ok___lsb 0 -#define reg_bif_core_rs_sdram_ref_stat___ok___width 1 -#define reg_bif_core_rs_sdram_ref_stat___ok___bit 0 -#define reg_bif_core_rs_sdram_ref_stat_offset 32 - -/* Register r_sdram_ref_stat, scope bif_core, type r */ -#define reg_bif_core_r_sdram_ref_stat___ok___lsb 0 -#define reg_bif_core_r_sdram_ref_stat___ok___width 1 -#define reg_bif_core_r_sdram_ref_stat___ok___bit 0 -#define reg_bif_core_r_sdram_ref_stat_offset 36 - - -/* Constants */ -#define regk_bif_core_bank2 0x00000000 -#define regk_bif_core_bank4 0x00000001 -#define regk_bif_core_bit10 0x0000000a -#define regk_bif_core_bit11 0x0000000b -#define regk_bif_core_bit12 0x0000000c -#define regk_bif_core_bit13 0x0000000d -#define regk_bif_core_bit14 0x0000000e -#define regk_bif_core_bit15 0x0000000f -#define regk_bif_core_bit16 0x00000010 -#define regk_bif_core_bit17 0x00000011 -#define regk_bif_core_bit18 0x00000012 -#define regk_bif_core_bit19 0x00000013 -#define regk_bif_core_bit20 0x00000014 -#define regk_bif_core_bit21 0x00000015 -#define regk_bif_core_bit22 0x00000016 -#define regk_bif_core_bit23 0x00000017 -#define regk_bif_core_bit24 0x00000018 -#define regk_bif_core_bit25 0x00000019 -#define regk_bif_core_bit26 0x0000001a -#define regk_bif_core_bit27 0x0000001b -#define regk_bif_core_bit28 0x0000001c -#define regk_bif_core_bit29 0x0000001d -#define regk_bif_core_bit9 0x00000009 -#define regk_bif_core_bw16 0x00000001 -#define regk_bif_core_bw32 0x00000000 -#define regk_bif_core_bwe 0x00000000 -#define regk_bif_core_cwe 0x00000001 -#define regk_bif_core_e15us 0x00000001 -#define regk_bif_core_e7800ns 0x00000002 -#define regk_bif_core_grp0 0x00000000 -#define regk_bif_core_grp1 0x00000001 -#define regk_bif_core_mrs 0x00000003 -#define regk_bif_core_no 0x00000000 -#define regk_bif_core_none 0x00000000 -#define regk_bif_core_nop 0x00000000 -#define regk_bif_core_off 0x00000000 -#define regk_bif_core_pre 0x00000002 -#define regk_bif_core_r_sdram_ref_stat_default 0x00000001 -#define regk_bif_core_rd 0x00000002 -#define regk_bif_core_ref 0x00000001 -#define regk_bif_core_rs_sdram_ref_stat_default 0x00000001 -#define regk_bif_core_rw_grp1_cfg_default 0x000006cf -#define regk_bif_core_rw_grp2_cfg_default 0x000006cf -#define regk_bif_core_rw_grp3_cfg_default 0x000006cf -#define regk_bif_core_rw_grp4_cfg_default 0x000006cf -#define regk_bif_core_rw_sdram_cfg_grp1_default 0x00000000 -#define regk_bif_core_slf 0x00000004 -#define regk_bif_core_wr 0x00000001 -#define regk_bif_core_yes 0x00000001 -#endif /* __bif_core_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h deleted file mode 100644 index 71532aa18168..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h +++ /dev/null @@ -1,495 +0,0 @@ -#ifndef __bif_dma_defs_asm_h -#define __bif_dma_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_dma_regs.r - * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp - * last modfied: Mon Apr 11 16:06:33 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_dma_defs_asm.h ../../inst/bif/rtl/bif_dma_regs.r - * id: $Id: bif_dma_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_ch0_ctrl, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch0_ctrl___bw___lsb 0 -#define reg_bif_dma_rw_ch0_ctrl___bw___width 2 -#define reg_bif_dma_rw_ch0_ctrl___burst_len___lsb 2 -#define reg_bif_dma_rw_ch0_ctrl___burst_len___width 1 -#define reg_bif_dma_rw_ch0_ctrl___burst_len___bit 2 -#define reg_bif_dma_rw_ch0_ctrl___cont___lsb 3 -#define reg_bif_dma_rw_ch0_ctrl___cont___width 1 -#define reg_bif_dma_rw_ch0_ctrl___cont___bit 3 -#define reg_bif_dma_rw_ch0_ctrl___end_pad___lsb 4 -#define reg_bif_dma_rw_ch0_ctrl___end_pad___width 1 -#define reg_bif_dma_rw_ch0_ctrl___end_pad___bit 4 -#define reg_bif_dma_rw_ch0_ctrl___cnt___lsb 5 -#define reg_bif_dma_rw_ch0_ctrl___cnt___width 1 -#define reg_bif_dma_rw_ch0_ctrl___cnt___bit 5 -#define reg_bif_dma_rw_ch0_ctrl___dreq_pin___lsb 6 -#define reg_bif_dma_rw_ch0_ctrl___dreq_pin___width 3 -#define reg_bif_dma_rw_ch0_ctrl___dreq_mode___lsb 9 -#define reg_bif_dma_rw_ch0_ctrl___dreq_mode___width 2 -#define reg_bif_dma_rw_ch0_ctrl___tc_in_pin___lsb 11 -#define reg_bif_dma_rw_ch0_ctrl___tc_in_pin___width 3 -#define reg_bif_dma_rw_ch0_ctrl___tc_in_mode___lsb 14 -#define reg_bif_dma_rw_ch0_ctrl___tc_in_mode___width 2 -#define reg_bif_dma_rw_ch0_ctrl___bus_mode___lsb 16 -#define reg_bif_dma_rw_ch0_ctrl___bus_mode___width 2 -#define reg_bif_dma_rw_ch0_ctrl___rate_en___lsb 18 -#define reg_bif_dma_rw_ch0_ctrl___rate_en___width 1 -#define reg_bif_dma_rw_ch0_ctrl___rate_en___bit 18 -#define reg_bif_dma_rw_ch0_ctrl___wr_all___lsb 19 -#define reg_bif_dma_rw_ch0_ctrl___wr_all___width 1 -#define reg_bif_dma_rw_ch0_ctrl___wr_all___bit 19 -#define reg_bif_dma_rw_ch0_ctrl_offset 0 - -/* Register rw_ch0_addr, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch0_addr___addr___lsb 0 -#define reg_bif_dma_rw_ch0_addr___addr___width 32 -#define reg_bif_dma_rw_ch0_addr_offset 4 - -/* Register rw_ch0_start, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch0_start___run___lsb 0 -#define reg_bif_dma_rw_ch0_start___run___width 1 -#define reg_bif_dma_rw_ch0_start___run___bit 0 -#define reg_bif_dma_rw_ch0_start_offset 8 - -/* Register rw_ch0_cnt, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch0_cnt___start_cnt___lsb 0 -#define reg_bif_dma_rw_ch0_cnt___start_cnt___width 16 -#define reg_bif_dma_rw_ch0_cnt_offset 12 - -/* Register r_ch0_stat, scope bif_dma, type r */ -#define reg_bif_dma_r_ch0_stat___cnt___lsb 0 -#define reg_bif_dma_r_ch0_stat___cnt___width 16 -#define reg_bif_dma_r_ch0_stat___run___lsb 31 -#define reg_bif_dma_r_ch0_stat___run___width 1 -#define reg_bif_dma_r_ch0_stat___run___bit 31 -#define reg_bif_dma_r_ch0_stat_offset 16 - -/* Register rw_ch1_ctrl, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch1_ctrl___bw___lsb 0 -#define reg_bif_dma_rw_ch1_ctrl___bw___width 2 -#define reg_bif_dma_rw_ch1_ctrl___burst_len___lsb 2 -#define reg_bif_dma_rw_ch1_ctrl___burst_len___width 1 -#define reg_bif_dma_rw_ch1_ctrl___burst_len___bit 2 -#define reg_bif_dma_rw_ch1_ctrl___cont___lsb 3 -#define reg_bif_dma_rw_ch1_ctrl___cont___width 1 -#define reg_bif_dma_rw_ch1_ctrl___cont___bit 3 -#define reg_bif_dma_rw_ch1_ctrl___end_discard___lsb 4 -#define reg_bif_dma_rw_ch1_ctrl___end_discard___width 1 -#define reg_bif_dma_rw_ch1_ctrl___end_discard___bit 4 -#define reg_bif_dma_rw_ch1_ctrl___cnt___lsb 5 -#define reg_bif_dma_rw_ch1_ctrl___cnt___width 1 -#define reg_bif_dma_rw_ch1_ctrl___cnt___bit 5 -#define reg_bif_dma_rw_ch1_ctrl___dreq_pin___lsb 6 -#define reg_bif_dma_rw_ch1_ctrl___dreq_pin___width 3 -#define reg_bif_dma_rw_ch1_ctrl___dreq_mode___lsb 9 -#define reg_bif_dma_rw_ch1_ctrl___dreq_mode___width 2 -#define reg_bif_dma_rw_ch1_ctrl___tc_in_pin___lsb 11 -#define reg_bif_dma_rw_ch1_ctrl___tc_in_pin___width 3 -#define reg_bif_dma_rw_ch1_ctrl___tc_in_mode___lsb 14 -#define reg_bif_dma_rw_ch1_ctrl___tc_in_mode___width 2 -#define reg_bif_dma_rw_ch1_ctrl___bus_mode___lsb 16 -#define reg_bif_dma_rw_ch1_ctrl___bus_mode___width 2 -#define reg_bif_dma_rw_ch1_ctrl___rate_en___lsb 18 -#define reg_bif_dma_rw_ch1_ctrl___rate_en___width 1 -#define reg_bif_dma_rw_ch1_ctrl___rate_en___bit 18 -#define reg_bif_dma_rw_ch1_ctrl_offset 32 - -/* Register rw_ch1_addr, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch1_addr___addr___lsb 0 -#define reg_bif_dma_rw_ch1_addr___addr___width 32 -#define reg_bif_dma_rw_ch1_addr_offset 36 - -/* Register rw_ch1_start, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch1_start___run___lsb 0 -#define reg_bif_dma_rw_ch1_start___run___width 1 -#define reg_bif_dma_rw_ch1_start___run___bit 0 -#define reg_bif_dma_rw_ch1_start_offset 40 - -/* Register rw_ch1_cnt, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch1_cnt___start_cnt___lsb 0 -#define reg_bif_dma_rw_ch1_cnt___start_cnt___width 16 -#define reg_bif_dma_rw_ch1_cnt_offset 44 - -/* Register r_ch1_stat, scope bif_dma, type r */ -#define reg_bif_dma_r_ch1_stat___cnt___lsb 0 -#define reg_bif_dma_r_ch1_stat___cnt___width 16 -#define reg_bif_dma_r_ch1_stat___run___lsb 31 -#define reg_bif_dma_r_ch1_stat___run___width 1 -#define reg_bif_dma_r_ch1_stat___run___bit 31 -#define reg_bif_dma_r_ch1_stat_offset 48 - -/* Register rw_ch2_ctrl, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch2_ctrl___bw___lsb 0 -#define reg_bif_dma_rw_ch2_ctrl___bw___width 2 -#define reg_bif_dma_rw_ch2_ctrl___burst_len___lsb 2 -#define reg_bif_dma_rw_ch2_ctrl___burst_len___width 1 -#define reg_bif_dma_rw_ch2_ctrl___burst_len___bit 2 -#define reg_bif_dma_rw_ch2_ctrl___cont___lsb 3 -#define reg_bif_dma_rw_ch2_ctrl___cont___width 1 -#define reg_bif_dma_rw_ch2_ctrl___cont___bit 3 -#define reg_bif_dma_rw_ch2_ctrl___end_pad___lsb 4 -#define reg_bif_dma_rw_ch2_ctrl___end_pad___width 1 -#define reg_bif_dma_rw_ch2_ctrl___end_pad___bit 4 -#define reg_bif_dma_rw_ch2_ctrl___cnt___lsb 5 -#define reg_bif_dma_rw_ch2_ctrl___cnt___width 1 -#define reg_bif_dma_rw_ch2_ctrl___cnt___bit 5 -#define reg_bif_dma_rw_ch2_ctrl___dreq_pin___lsb 6 -#define reg_bif_dma_rw_ch2_ctrl___dreq_pin___width 3 -#define reg_bif_dma_rw_ch2_ctrl___dreq_mode___lsb 9 -#define reg_bif_dma_rw_ch2_ctrl___dreq_mode___width 2 -#define reg_bif_dma_rw_ch2_ctrl___tc_in_pin___lsb 11 -#define reg_bif_dma_rw_ch2_ctrl___tc_in_pin___width 3 -#define reg_bif_dma_rw_ch2_ctrl___tc_in_mode___lsb 14 -#define reg_bif_dma_rw_ch2_ctrl___tc_in_mode___width 2 -#define reg_bif_dma_rw_ch2_ctrl___bus_mode___lsb 16 -#define reg_bif_dma_rw_ch2_ctrl___bus_mode___width 2 -#define reg_bif_dma_rw_ch2_ctrl___rate_en___lsb 18 -#define reg_bif_dma_rw_ch2_ctrl___rate_en___width 1 -#define reg_bif_dma_rw_ch2_ctrl___rate_en___bit 18 -#define reg_bif_dma_rw_ch2_ctrl___wr_all___lsb 19 -#define reg_bif_dma_rw_ch2_ctrl___wr_all___width 1 -#define reg_bif_dma_rw_ch2_ctrl___wr_all___bit 19 -#define reg_bif_dma_rw_ch2_ctrl_offset 64 - -/* Register rw_ch2_addr, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch2_addr___addr___lsb 0 -#define reg_bif_dma_rw_ch2_addr___addr___width 32 -#define reg_bif_dma_rw_ch2_addr_offset 68 - -/* Register rw_ch2_start, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch2_start___run___lsb 0 -#define reg_bif_dma_rw_ch2_start___run___width 1 -#define reg_bif_dma_rw_ch2_start___run___bit 0 -#define reg_bif_dma_rw_ch2_start_offset 72 - -/* Register rw_ch2_cnt, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch2_cnt___start_cnt___lsb 0 -#define reg_bif_dma_rw_ch2_cnt___start_cnt___width 16 -#define reg_bif_dma_rw_ch2_cnt_offset 76 - -/* Register r_ch2_stat, scope bif_dma, type r */ -#define reg_bif_dma_r_ch2_stat___cnt___lsb 0 -#define reg_bif_dma_r_ch2_stat___cnt___width 16 -#define reg_bif_dma_r_ch2_stat___run___lsb 31 -#define reg_bif_dma_r_ch2_stat___run___width 1 -#define reg_bif_dma_r_ch2_stat___run___bit 31 -#define reg_bif_dma_r_ch2_stat_offset 80 - -/* Register rw_ch3_ctrl, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch3_ctrl___bw___lsb 0 -#define reg_bif_dma_rw_ch3_ctrl___bw___width 2 -#define reg_bif_dma_rw_ch3_ctrl___burst_len___lsb 2 -#define reg_bif_dma_rw_ch3_ctrl___burst_len___width 1 -#define reg_bif_dma_rw_ch3_ctrl___burst_len___bit 2 -#define reg_bif_dma_rw_ch3_ctrl___cont___lsb 3 -#define reg_bif_dma_rw_ch3_ctrl___cont___width 1 -#define reg_bif_dma_rw_ch3_ctrl___cont___bit 3 -#define reg_bif_dma_rw_ch3_ctrl___end_discard___lsb 4 -#define reg_bif_dma_rw_ch3_ctrl___end_discard___width 1 -#define reg_bif_dma_rw_ch3_ctrl___end_discard___bit 4 -#define reg_bif_dma_rw_ch3_ctrl___cnt___lsb 5 -#define reg_bif_dma_rw_ch3_ctrl___cnt___width 1 -#define reg_bif_dma_rw_ch3_ctrl___cnt___bit 5 -#define reg_bif_dma_rw_ch3_ctrl___dreq_pin___lsb 6 -#define reg_bif_dma_rw_ch3_ctrl___dreq_pin___width 3 -#define reg_bif_dma_rw_ch3_ctrl___dreq_mode___lsb 9 -#define reg_bif_dma_rw_ch3_ctrl___dreq_mode___width 2 -#define reg_bif_dma_rw_ch3_ctrl___tc_in_pin___lsb 11 -#define reg_bif_dma_rw_ch3_ctrl___tc_in_pin___width 3 -#define reg_bif_dma_rw_ch3_ctrl___tc_in_mode___lsb 14 -#define reg_bif_dma_rw_ch3_ctrl___tc_in_mode___width 2 -#define reg_bif_dma_rw_ch3_ctrl___bus_mode___lsb 16 -#define reg_bif_dma_rw_ch3_ctrl___bus_mode___width 2 -#define reg_bif_dma_rw_ch3_ctrl___rate_en___lsb 18 -#define reg_bif_dma_rw_ch3_ctrl___rate_en___width 1 -#define reg_bif_dma_rw_ch3_ctrl___rate_en___bit 18 -#define reg_bif_dma_rw_ch3_ctrl_offset 96 - -/* Register rw_ch3_addr, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch3_addr___addr___lsb 0 -#define reg_bif_dma_rw_ch3_addr___addr___width 32 -#define reg_bif_dma_rw_ch3_addr_offset 100 - -/* Register rw_ch3_start, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch3_start___run___lsb 0 -#define reg_bif_dma_rw_ch3_start___run___width 1 -#define reg_bif_dma_rw_ch3_start___run___bit 0 -#define reg_bif_dma_rw_ch3_start_offset 104 - -/* Register rw_ch3_cnt, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ch3_cnt___start_cnt___lsb 0 -#define reg_bif_dma_rw_ch3_cnt___start_cnt___width 16 -#define reg_bif_dma_rw_ch3_cnt_offset 108 - -/* Register r_ch3_stat, scope bif_dma, type r */ -#define reg_bif_dma_r_ch3_stat___cnt___lsb 0 -#define reg_bif_dma_r_ch3_stat___cnt___width 16 -#define reg_bif_dma_r_ch3_stat___run___lsb 31 -#define reg_bif_dma_r_ch3_stat___run___width 1 -#define reg_bif_dma_r_ch3_stat___run___bit 31 -#define reg_bif_dma_r_ch3_stat_offset 112 - -/* Register rw_intr_mask, scope bif_dma, type rw */ -#define reg_bif_dma_rw_intr_mask___ext_dma0___lsb 0 -#define reg_bif_dma_rw_intr_mask___ext_dma0___width 1 -#define reg_bif_dma_rw_intr_mask___ext_dma0___bit 0 -#define reg_bif_dma_rw_intr_mask___ext_dma1___lsb 1 -#define reg_bif_dma_rw_intr_mask___ext_dma1___width 1 -#define reg_bif_dma_rw_intr_mask___ext_dma1___bit 1 -#define reg_bif_dma_rw_intr_mask___ext_dma2___lsb 2 -#define reg_bif_dma_rw_intr_mask___ext_dma2___width 1 -#define reg_bif_dma_rw_intr_mask___ext_dma2___bit 2 -#define reg_bif_dma_rw_intr_mask___ext_dma3___lsb 3 -#define reg_bif_dma_rw_intr_mask___ext_dma3___width 1 -#define reg_bif_dma_rw_intr_mask___ext_dma3___bit 3 -#define reg_bif_dma_rw_intr_mask_offset 128 - -/* Register rw_ack_intr, scope bif_dma, type rw */ -#define reg_bif_dma_rw_ack_intr___ext_dma0___lsb 0 -#define reg_bif_dma_rw_ack_intr___ext_dma0___width 1 -#define reg_bif_dma_rw_ack_intr___ext_dma0___bit 0 -#define reg_bif_dma_rw_ack_intr___ext_dma1___lsb 1 -#define reg_bif_dma_rw_ack_intr___ext_dma1___width 1 -#define reg_bif_dma_rw_ack_intr___ext_dma1___bit 1 -#define reg_bif_dma_rw_ack_intr___ext_dma2___lsb 2 -#define reg_bif_dma_rw_ack_intr___ext_dma2___width 1 -#define reg_bif_dma_rw_ack_intr___ext_dma2___bit 2 -#define reg_bif_dma_rw_ack_intr___ext_dma3___lsb 3 -#define reg_bif_dma_rw_ack_intr___ext_dma3___width 1 -#define reg_bif_dma_rw_ack_intr___ext_dma3___bit 3 -#define reg_bif_dma_rw_ack_intr_offset 132 - -/* Register r_intr, scope bif_dma, type r */ -#define reg_bif_dma_r_intr___ext_dma0___lsb 0 -#define reg_bif_dma_r_intr___ext_dma0___width 1 -#define reg_bif_dma_r_intr___ext_dma0___bit 0 -#define reg_bif_dma_r_intr___ext_dma1___lsb 1 -#define reg_bif_dma_r_intr___ext_dma1___width 1 -#define reg_bif_dma_r_intr___ext_dma1___bit 1 -#define reg_bif_dma_r_intr___ext_dma2___lsb 2 -#define reg_bif_dma_r_intr___ext_dma2___width 1 -#define reg_bif_dma_r_intr___ext_dma2___bit 2 -#define reg_bif_dma_r_intr___ext_dma3___lsb 3 -#define reg_bif_dma_r_intr___ext_dma3___width 1 -#define reg_bif_dma_r_intr___ext_dma3___bit 3 -#define reg_bif_dma_r_intr_offset 136 - -/* Register r_masked_intr, scope bif_dma, type r */ -#define reg_bif_dma_r_masked_intr___ext_dma0___lsb 0 -#define reg_bif_dma_r_masked_intr___ext_dma0___width 1 -#define reg_bif_dma_r_masked_intr___ext_dma0___bit 0 -#define reg_bif_dma_r_masked_intr___ext_dma1___lsb 1 -#define reg_bif_dma_r_masked_intr___ext_dma1___width 1 -#define reg_bif_dma_r_masked_intr___ext_dma1___bit 1 -#define reg_bif_dma_r_masked_intr___ext_dma2___lsb 2 -#define reg_bif_dma_r_masked_intr___ext_dma2___width 1 -#define reg_bif_dma_r_masked_intr___ext_dma2___bit 2 -#define reg_bif_dma_r_masked_intr___ext_dma3___lsb 3 -#define reg_bif_dma_r_masked_intr___ext_dma3___width 1 -#define reg_bif_dma_r_masked_intr___ext_dma3___bit 3 -#define reg_bif_dma_r_masked_intr_offset 140 - -/* Register rw_pin0_cfg, scope bif_dma, type rw */ -#define reg_bif_dma_rw_pin0_cfg___master_ch___lsb 0 -#define reg_bif_dma_rw_pin0_cfg___master_ch___width 2 -#define reg_bif_dma_rw_pin0_cfg___master_mode___lsb 2 -#define reg_bif_dma_rw_pin0_cfg___master_mode___width 3 -#define reg_bif_dma_rw_pin0_cfg___slave_ch___lsb 5 -#define reg_bif_dma_rw_pin0_cfg___slave_ch___width 2 -#define reg_bif_dma_rw_pin0_cfg___slave_mode___lsb 7 -#define reg_bif_dma_rw_pin0_cfg___slave_mode___width 3 -#define reg_bif_dma_rw_pin0_cfg_offset 160 - -/* Register rw_pin1_cfg, scope bif_dma, type rw */ -#define reg_bif_dma_rw_pin1_cfg___master_ch___lsb 0 -#define reg_bif_dma_rw_pin1_cfg___master_ch___width 2 -#define reg_bif_dma_rw_pin1_cfg___master_mode___lsb 2 -#define reg_bif_dma_rw_pin1_cfg___master_mode___width 3 -#define reg_bif_dma_rw_pin1_cfg___slave_ch___lsb 5 -#define reg_bif_dma_rw_pin1_cfg___slave_ch___width 2 -#define reg_bif_dma_rw_pin1_cfg___slave_mode___lsb 7 -#define reg_bif_dma_rw_pin1_cfg___slave_mode___width 3 -#define reg_bif_dma_rw_pin1_cfg_offset 164 - -/* Register rw_pin2_cfg, scope bif_dma, type rw */ -#define reg_bif_dma_rw_pin2_cfg___master_ch___lsb 0 -#define reg_bif_dma_rw_pin2_cfg___master_ch___width 2 -#define reg_bif_dma_rw_pin2_cfg___master_mode___lsb 2 -#define reg_bif_dma_rw_pin2_cfg___master_mode___width 3 -#define reg_bif_dma_rw_pin2_cfg___slave_ch___lsb 5 -#define reg_bif_dma_rw_pin2_cfg___slave_ch___width 2 -#define reg_bif_dma_rw_pin2_cfg___slave_mode___lsb 7 -#define reg_bif_dma_rw_pin2_cfg___slave_mode___width 3 -#define reg_bif_dma_rw_pin2_cfg_offset 168 - -/* Register rw_pin3_cfg, scope bif_dma, type rw */ -#define reg_bif_dma_rw_pin3_cfg___master_ch___lsb 0 -#define reg_bif_dma_rw_pin3_cfg___master_ch___width 2 -#define reg_bif_dma_rw_pin3_cfg___master_mode___lsb 2 -#define reg_bif_dma_rw_pin3_cfg___master_mode___width 3 -#define reg_bif_dma_rw_pin3_cfg___slave_ch___lsb 5 -#define reg_bif_dma_rw_pin3_cfg___slave_ch___width 2 -#define reg_bif_dma_rw_pin3_cfg___slave_mode___lsb 7 -#define reg_bif_dma_rw_pin3_cfg___slave_mode___width 3 -#define reg_bif_dma_rw_pin3_cfg_offset 172 - -/* Register rw_pin4_cfg, scope bif_dma, type rw */ -#define reg_bif_dma_rw_pin4_cfg___master_ch___lsb 0 -#define reg_bif_dma_rw_pin4_cfg___master_ch___width 2 -#define reg_bif_dma_rw_pin4_cfg___master_mode___lsb 2 -#define reg_bif_dma_rw_pin4_cfg___master_mode___width 3 -#define reg_bif_dma_rw_pin4_cfg___slave_ch___lsb 5 -#define reg_bif_dma_rw_pin4_cfg___slave_ch___width 2 -#define reg_bif_dma_rw_pin4_cfg___slave_mode___lsb 7 -#define reg_bif_dma_rw_pin4_cfg___slave_mode___width 3 -#define reg_bif_dma_rw_pin4_cfg_offset 176 - -/* Register rw_pin5_cfg, scope bif_dma, type rw */ -#define reg_bif_dma_rw_pin5_cfg___master_ch___lsb 0 -#define reg_bif_dma_rw_pin5_cfg___master_ch___width 2 -#define reg_bif_dma_rw_pin5_cfg___master_mode___lsb 2 -#define reg_bif_dma_rw_pin5_cfg___master_mode___width 3 -#define reg_bif_dma_rw_pin5_cfg___slave_ch___lsb 5 -#define reg_bif_dma_rw_pin5_cfg___slave_ch___width 2 -#define reg_bif_dma_rw_pin5_cfg___slave_mode___lsb 7 -#define reg_bif_dma_rw_pin5_cfg___slave_mode___width 3 -#define reg_bif_dma_rw_pin5_cfg_offset 180 - -/* Register rw_pin6_cfg, scope bif_dma, type rw */ -#define reg_bif_dma_rw_pin6_cfg___master_ch___lsb 0 -#define reg_bif_dma_rw_pin6_cfg___master_ch___width 2 -#define reg_bif_dma_rw_pin6_cfg___master_mode___lsb 2 -#define reg_bif_dma_rw_pin6_cfg___master_mode___width 3 -#define reg_bif_dma_rw_pin6_cfg___slave_ch___lsb 5 -#define reg_bif_dma_rw_pin6_cfg___slave_ch___width 2 -#define reg_bif_dma_rw_pin6_cfg___slave_mode___lsb 7 -#define reg_bif_dma_rw_pin6_cfg___slave_mode___width 3 -#define reg_bif_dma_rw_pin6_cfg_offset 184 - -/* Register rw_pin7_cfg, scope bif_dma, type rw */ -#define reg_bif_dma_rw_pin7_cfg___master_ch___lsb 0 -#define reg_bif_dma_rw_pin7_cfg___master_ch___width 2 -#define reg_bif_dma_rw_pin7_cfg___master_mode___lsb 2 -#define reg_bif_dma_rw_pin7_cfg___master_mode___width 3 -#define reg_bif_dma_rw_pin7_cfg___slave_ch___lsb 5 -#define reg_bif_dma_rw_pin7_cfg___slave_ch___width 2 -#define reg_bif_dma_rw_pin7_cfg___slave_mode___lsb 7 -#define reg_bif_dma_rw_pin7_cfg___slave_mode___width 3 -#define reg_bif_dma_rw_pin7_cfg_offset 188 - -/* Register r_pin_stat, scope bif_dma, type r */ -#define reg_bif_dma_r_pin_stat___pin0___lsb 0 -#define reg_bif_dma_r_pin_stat___pin0___width 1 -#define reg_bif_dma_r_pin_stat___pin0___bit 0 -#define reg_bif_dma_r_pin_stat___pin1___lsb 1 -#define reg_bif_dma_r_pin_stat___pin1___width 1 -#define reg_bif_dma_r_pin_stat___pin1___bit 1 -#define reg_bif_dma_r_pin_stat___pin2___lsb 2 -#define reg_bif_dma_r_pin_stat___pin2___width 1 -#define reg_bif_dma_r_pin_stat___pin2___bit 2 -#define reg_bif_dma_r_pin_stat___pin3___lsb 3 -#define reg_bif_dma_r_pin_stat___pin3___width 1 -#define reg_bif_dma_r_pin_stat___pin3___bit 3 -#define reg_bif_dma_r_pin_stat___pin4___lsb 4 -#define reg_bif_dma_r_pin_stat___pin4___width 1 -#define reg_bif_dma_r_pin_stat___pin4___bit 4 -#define reg_bif_dma_r_pin_stat___pin5___lsb 5 -#define reg_bif_dma_r_pin_stat___pin5___width 1 -#define reg_bif_dma_r_pin_stat___pin5___bit 5 -#define reg_bif_dma_r_pin_stat___pin6___lsb 6 -#define reg_bif_dma_r_pin_stat___pin6___width 1 -#define reg_bif_dma_r_pin_stat___pin6___bit 6 -#define reg_bif_dma_r_pin_stat___pin7___lsb 7 -#define reg_bif_dma_r_pin_stat___pin7___width 1 -#define reg_bif_dma_r_pin_stat___pin7___bit 7 -#define reg_bif_dma_r_pin_stat_offset 192 - - -/* Constants */ -#define regk_bif_dma_as_master 0x00000001 -#define regk_bif_dma_as_slave 0x00000001 -#define regk_bif_dma_burst1 0x00000000 -#define regk_bif_dma_burst8 0x00000001 -#define regk_bif_dma_bw16 0x00000001 -#define regk_bif_dma_bw32 0x00000002 -#define regk_bif_dma_bw8 0x00000000 -#define regk_bif_dma_dack 0x00000006 -#define regk_bif_dma_dack_inv 0x00000007 -#define regk_bif_dma_force 0x00000001 -#define regk_bif_dma_hi 0x00000003 -#define regk_bif_dma_inv 0x00000003 -#define regk_bif_dma_lo 0x00000002 -#define regk_bif_dma_master 0x00000001 -#define regk_bif_dma_no 0x00000000 -#define regk_bif_dma_norm 0x00000002 -#define regk_bif_dma_off 0x00000000 -#define regk_bif_dma_rw_ch0_ctrl_default 0x00000000 -#define regk_bif_dma_rw_ch0_start_default 0x00000000 -#define regk_bif_dma_rw_ch1_ctrl_default 0x00000000 -#define regk_bif_dma_rw_ch1_start_default 0x00000000 -#define regk_bif_dma_rw_ch2_ctrl_default 0x00000000 -#define regk_bif_dma_rw_ch2_start_default 0x00000000 -#define regk_bif_dma_rw_ch3_ctrl_default 0x00000000 -#define regk_bif_dma_rw_ch3_start_default 0x00000000 -#define regk_bif_dma_rw_intr_mask_default 0x00000000 -#define regk_bif_dma_rw_pin0_cfg_default 0x00000000 -#define regk_bif_dma_rw_pin1_cfg_default 0x00000000 -#define regk_bif_dma_rw_pin2_cfg_default 0x00000000 -#define regk_bif_dma_rw_pin3_cfg_default 0x00000000 -#define regk_bif_dma_rw_pin4_cfg_default 0x00000000 -#define regk_bif_dma_rw_pin5_cfg_default 0x00000000 -#define regk_bif_dma_rw_pin6_cfg_default 0x00000000 -#define regk_bif_dma_rw_pin7_cfg_default 0x00000000 -#define regk_bif_dma_slave 0x00000002 -#define regk_bif_dma_sreq 0x00000006 -#define regk_bif_dma_sreq_inv 0x00000007 -#define regk_bif_dma_tc 0x00000004 -#define regk_bif_dma_tc_inv 0x00000005 -#define regk_bif_dma_yes 0x00000001 -#endif /* __bif_dma_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h deleted file mode 100644 index 031f33a365bb..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h +++ /dev/null @@ -1,249 +0,0 @@ -#ifndef __bif_slave_defs_asm_h -#define __bif_slave_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_slave_regs.r - * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp - * last modfied: Mon Apr 11 16:06:34 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_slave_defs_asm.h ../../inst/bif/rtl/bif_slave_regs.r - * id: $Id: bif_slave_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_slave_cfg, scope bif_slave, type rw */ -#define reg_bif_slave_rw_slave_cfg___slave_id___lsb 0 -#define reg_bif_slave_rw_slave_cfg___slave_id___width 3 -#define reg_bif_slave_rw_slave_cfg___use_slave_id___lsb 3 -#define reg_bif_slave_rw_slave_cfg___use_slave_id___width 1 -#define reg_bif_slave_rw_slave_cfg___use_slave_id___bit 3 -#define reg_bif_slave_rw_slave_cfg___boot_rdy___lsb 4 -#define reg_bif_slave_rw_slave_cfg___boot_rdy___width 1 -#define reg_bif_slave_rw_slave_cfg___boot_rdy___bit 4 -#define reg_bif_slave_rw_slave_cfg___loopback___lsb 5 -#define reg_bif_slave_rw_slave_cfg___loopback___width 1 -#define reg_bif_slave_rw_slave_cfg___loopback___bit 5 -#define reg_bif_slave_rw_slave_cfg___dis___lsb 6 -#define reg_bif_slave_rw_slave_cfg___dis___width 1 -#define reg_bif_slave_rw_slave_cfg___dis___bit 6 -#define reg_bif_slave_rw_slave_cfg_offset 0 - -/* Register r_slave_mode, scope bif_slave, type r */ -#define reg_bif_slave_r_slave_mode___ch0_mode___lsb 0 -#define reg_bif_slave_r_slave_mode___ch0_mode___width 1 -#define reg_bif_slave_r_slave_mode___ch0_mode___bit 0 -#define reg_bif_slave_r_slave_mode___ch1_mode___lsb 1 -#define reg_bif_slave_r_slave_mode___ch1_mode___width 1 -#define reg_bif_slave_r_slave_mode___ch1_mode___bit 1 -#define reg_bif_slave_r_slave_mode___ch2_mode___lsb 2 -#define reg_bif_slave_r_slave_mode___ch2_mode___width 1 -#define reg_bif_slave_r_slave_mode___ch2_mode___bit 2 -#define reg_bif_slave_r_slave_mode___ch3_mode___lsb 3 -#define reg_bif_slave_r_slave_mode___ch3_mode___width 1 -#define reg_bif_slave_r_slave_mode___ch3_mode___bit 3 -#define reg_bif_slave_r_slave_mode_offset 4 - -/* Register rw_ch0_cfg, scope bif_slave, type rw */ -#define reg_bif_slave_rw_ch0_cfg___rd_hold___lsb 0 -#define reg_bif_slave_rw_ch0_cfg___rd_hold___width 2 -#define reg_bif_slave_rw_ch0_cfg___access_mode___lsb 2 -#define reg_bif_slave_rw_ch0_cfg___access_mode___width 1 -#define reg_bif_slave_rw_ch0_cfg___access_mode___bit 2 -#define reg_bif_slave_rw_ch0_cfg___access_ctrl___lsb 3 -#define reg_bif_slave_rw_ch0_cfg___access_ctrl___width 1 -#define reg_bif_slave_rw_ch0_cfg___access_ctrl___bit 3 -#define reg_bif_slave_rw_ch0_cfg___data_cs___lsb 4 -#define reg_bif_slave_rw_ch0_cfg___data_cs___width 2 -#define reg_bif_slave_rw_ch0_cfg_offset 16 - -/* Register rw_ch1_cfg, scope bif_slave, type rw */ -#define reg_bif_slave_rw_ch1_cfg___rd_hold___lsb 0 -#define reg_bif_slave_rw_ch1_cfg___rd_hold___width 2 -#define reg_bif_slave_rw_ch1_cfg___access_mode___lsb 2 -#define reg_bif_slave_rw_ch1_cfg___access_mode___width 1 -#define reg_bif_slave_rw_ch1_cfg___access_mode___bit 2 -#define reg_bif_slave_rw_ch1_cfg___access_ctrl___lsb 3 -#define reg_bif_slave_rw_ch1_cfg___access_ctrl___width 1 -#define reg_bif_slave_rw_ch1_cfg___access_ctrl___bit 3 -#define reg_bif_slave_rw_ch1_cfg___data_cs___lsb 4 -#define reg_bif_slave_rw_ch1_cfg___data_cs___width 2 -#define reg_bif_slave_rw_ch1_cfg_offset 20 - -/* Register rw_ch2_cfg, scope bif_slave, type rw */ -#define reg_bif_slave_rw_ch2_cfg___rd_hold___lsb 0 -#define reg_bif_slave_rw_ch2_cfg___rd_hold___width 2 -#define reg_bif_slave_rw_ch2_cfg___access_mode___lsb 2 -#define reg_bif_slave_rw_ch2_cfg___access_mode___width 1 -#define reg_bif_slave_rw_ch2_cfg___access_mode___bit 2 -#define reg_bif_slave_rw_ch2_cfg___access_ctrl___lsb 3 -#define reg_bif_slave_rw_ch2_cfg___access_ctrl___width 1 -#define reg_bif_slave_rw_ch2_cfg___access_ctrl___bit 3 -#define reg_bif_slave_rw_ch2_cfg___data_cs___lsb 4 -#define reg_bif_slave_rw_ch2_cfg___data_cs___width 2 -#define reg_bif_slave_rw_ch2_cfg_offset 24 - -/* Register rw_ch3_cfg, scope bif_slave, type rw */ -#define reg_bif_slave_rw_ch3_cfg___rd_hold___lsb 0 -#define reg_bif_slave_rw_ch3_cfg___rd_hold___width 2 -#define reg_bif_slave_rw_ch3_cfg___access_mode___lsb 2 -#define reg_bif_slave_rw_ch3_cfg___access_mode___width 1 -#define reg_bif_slave_rw_ch3_cfg___access_mode___bit 2 -#define reg_bif_slave_rw_ch3_cfg___access_ctrl___lsb 3 -#define reg_bif_slave_rw_ch3_cfg___access_ctrl___width 1 -#define reg_bif_slave_rw_ch3_cfg___access_ctrl___bit 3 -#define reg_bif_slave_rw_ch3_cfg___data_cs___lsb 4 -#define reg_bif_slave_rw_ch3_cfg___data_cs___width 2 -#define reg_bif_slave_rw_ch3_cfg_offset 28 - -/* Register rw_arb_cfg, scope bif_slave, type rw */ -#define reg_bif_slave_rw_arb_cfg___brin_mode___lsb 0 -#define reg_bif_slave_rw_arb_cfg___brin_mode___width 1 -#define reg_bif_slave_rw_arb_cfg___brin_mode___bit 0 -#define reg_bif_slave_rw_arb_cfg___brout_mode___lsb 1 -#define reg_bif_slave_rw_arb_cfg___brout_mode___width 3 -#define reg_bif_slave_rw_arb_cfg___bg_mode___lsb 4 -#define reg_bif_slave_rw_arb_cfg___bg_mode___width 3 -#define reg_bif_slave_rw_arb_cfg___release___lsb 7 -#define reg_bif_slave_rw_arb_cfg___release___width 2 -#define reg_bif_slave_rw_arb_cfg___acquire___lsb 9 -#define reg_bif_slave_rw_arb_cfg___acquire___width 1 -#define reg_bif_slave_rw_arb_cfg___acquire___bit 9 -#define reg_bif_slave_rw_arb_cfg___settle_time___lsb 10 -#define reg_bif_slave_rw_arb_cfg___settle_time___width 2 -#define reg_bif_slave_rw_arb_cfg___dram_ctrl___lsb 12 -#define reg_bif_slave_rw_arb_cfg___dram_ctrl___width 1 -#define reg_bif_slave_rw_arb_cfg___dram_ctrl___bit 12 -#define reg_bif_slave_rw_arb_cfg_offset 32 - -/* Register r_arb_stat, scope bif_slave, type r */ -#define reg_bif_slave_r_arb_stat___init_mode___lsb 0 -#define reg_bif_slave_r_arb_stat___init_mode___width 1 -#define reg_bif_slave_r_arb_stat___init_mode___bit 0 -#define reg_bif_slave_r_arb_stat___mode___lsb 1 -#define reg_bif_slave_r_arb_stat___mode___width 1 -#define reg_bif_slave_r_arb_stat___mode___bit 1 -#define reg_bif_slave_r_arb_stat___brin___lsb 2 -#define reg_bif_slave_r_arb_stat___brin___width 1 -#define reg_bif_slave_r_arb_stat___brin___bit 2 -#define reg_bif_slave_r_arb_stat___brout___lsb 3 -#define reg_bif_slave_r_arb_stat___brout___width 1 -#define reg_bif_slave_r_arb_stat___brout___bit 3 -#define reg_bif_slave_r_arb_stat___bg___lsb 4 -#define reg_bif_slave_r_arb_stat___bg___width 1 -#define reg_bif_slave_r_arb_stat___bg___bit 4 -#define reg_bif_slave_r_arb_stat_offset 36 - -/* Register rw_intr_mask, scope bif_slave, type rw */ -#define reg_bif_slave_rw_intr_mask___bus_release___lsb 0 -#define reg_bif_slave_rw_intr_mask___bus_release___width 1 -#define reg_bif_slave_rw_intr_mask___bus_release___bit 0 -#define reg_bif_slave_rw_intr_mask___bus_acquire___lsb 1 -#define reg_bif_slave_rw_intr_mask___bus_acquire___width 1 -#define reg_bif_slave_rw_intr_mask___bus_acquire___bit 1 -#define reg_bif_slave_rw_intr_mask_offset 64 - -/* Register rw_ack_intr, scope bif_slave, type rw */ -#define reg_bif_slave_rw_ack_intr___bus_release___lsb 0 -#define reg_bif_slave_rw_ack_intr___bus_release___width 1 -#define reg_bif_slave_rw_ack_intr___bus_release___bit 0 -#define reg_bif_slave_rw_ack_intr___bus_acquire___lsb 1 -#define reg_bif_slave_rw_ack_intr___bus_acquire___width 1 -#define reg_bif_slave_rw_ack_intr___bus_acquire___bit 1 -#define reg_bif_slave_rw_ack_intr_offset 68 - -/* Register r_intr, scope bif_slave, type r */ -#define reg_bif_slave_r_intr___bus_release___lsb 0 -#define reg_bif_slave_r_intr___bus_release___width 1 -#define reg_bif_slave_r_intr___bus_release___bit 0 -#define reg_bif_slave_r_intr___bus_acquire___lsb 1 -#define reg_bif_slave_r_intr___bus_acquire___width 1 -#define reg_bif_slave_r_intr___bus_acquire___bit 1 -#define reg_bif_slave_r_intr_offset 72 - -/* Register r_masked_intr, scope bif_slave, type r */ -#define reg_bif_slave_r_masked_intr___bus_release___lsb 0 -#define reg_bif_slave_r_masked_intr___bus_release___width 1 -#define reg_bif_slave_r_masked_intr___bus_release___bit 0 -#define reg_bif_slave_r_masked_intr___bus_acquire___lsb 1 -#define reg_bif_slave_r_masked_intr___bus_acquire___width 1 -#define reg_bif_slave_r_masked_intr___bus_acquire___bit 1 -#define reg_bif_slave_r_masked_intr_offset 76 - - -/* Constants */ -#define regk_bif_slave_active_hi 0x00000003 -#define regk_bif_slave_active_lo 0x00000002 -#define regk_bif_slave_addr 0x00000000 -#define regk_bif_slave_always 0x00000001 -#define regk_bif_slave_at_idle 0x00000002 -#define regk_bif_slave_burst_end 0x00000003 -#define regk_bif_slave_dma 0x00000001 -#define regk_bif_slave_hi 0x00000003 -#define regk_bif_slave_inv 0x00000001 -#define regk_bif_slave_lo 0x00000002 -#define regk_bif_slave_local 0x00000001 -#define regk_bif_slave_master 0x00000000 -#define regk_bif_slave_mode_reg 0x00000001 -#define regk_bif_slave_no 0x00000000 -#define regk_bif_slave_norm 0x00000000 -#define regk_bif_slave_on_access 0x00000000 -#define regk_bif_slave_rw_arb_cfg_default 0x00000000 -#define regk_bif_slave_rw_ch0_cfg_default 0x00000000 -#define regk_bif_slave_rw_ch1_cfg_default 0x00000000 -#define regk_bif_slave_rw_ch2_cfg_default 0x00000000 -#define regk_bif_slave_rw_ch3_cfg_default 0x00000000 -#define regk_bif_slave_rw_intr_mask_default 0x00000000 -#define regk_bif_slave_rw_slave_cfg_default 0x00000000 -#define regk_bif_slave_shared 0x00000000 -#define regk_bif_slave_slave 0x00000001 -#define regk_bif_slave_t0ns 0x00000003 -#define regk_bif_slave_t10ns 0x00000002 -#define regk_bif_slave_t20ns 0x00000003 -#define regk_bif_slave_t30ns 0x00000002 -#define regk_bif_slave_t40ns 0x00000001 -#define regk_bif_slave_t50ns 0x00000000 -#define regk_bif_slave_yes 0x00000001 -#define regk_bif_slave_z 0x00000004 -#endif /* __bif_slave_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h deleted file mode 100644 index e98476332e1f..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef __config_defs_asm_h -#define __config_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../rtl/config_regs.r - * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp - * last modfied: Thu Mar 4 12:34:39 2004 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/config_defs_asm.h ../../rtl/config_regs.r - * id: $Id: config_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register r_bootsel, scope config, type r */ -#define reg_config_r_bootsel___boot_mode___lsb 0 -#define reg_config_r_bootsel___boot_mode___width 3 -#define reg_config_r_bootsel___full_duplex___lsb 3 -#define reg_config_r_bootsel___full_duplex___width 1 -#define reg_config_r_bootsel___full_duplex___bit 3 -#define reg_config_r_bootsel___user___lsb 4 -#define reg_config_r_bootsel___user___width 1 -#define reg_config_r_bootsel___user___bit 4 -#define reg_config_r_bootsel___pll___lsb 5 -#define reg_config_r_bootsel___pll___width 1 -#define reg_config_r_bootsel___pll___bit 5 -#define reg_config_r_bootsel___flash_bw___lsb 6 -#define reg_config_r_bootsel___flash_bw___width 1 -#define reg_config_r_bootsel___flash_bw___bit 6 -#define reg_config_r_bootsel_offset 0 - -/* Register rw_clk_ctrl, scope config, type rw */ -#define reg_config_rw_clk_ctrl___pll___lsb 0 -#define reg_config_rw_clk_ctrl___pll___width 1 -#define reg_config_rw_clk_ctrl___pll___bit 0 -#define reg_config_rw_clk_ctrl___cpu___lsb 1 -#define reg_config_rw_clk_ctrl___cpu___width 1 -#define reg_config_rw_clk_ctrl___cpu___bit 1 -#define reg_config_rw_clk_ctrl___iop___lsb 2 -#define reg_config_rw_clk_ctrl___iop___width 1 -#define reg_config_rw_clk_ctrl___iop___bit 2 -#define reg_config_rw_clk_ctrl___dma01_eth0___lsb 3 -#define reg_config_rw_clk_ctrl___dma01_eth0___width 1 -#define reg_config_rw_clk_ctrl___dma01_eth0___bit 3 -#define reg_config_rw_clk_ctrl___dma23___lsb 4 -#define reg_config_rw_clk_ctrl___dma23___width 1 -#define reg_config_rw_clk_ctrl___dma23___bit 4 -#define reg_config_rw_clk_ctrl___dma45___lsb 5 -#define reg_config_rw_clk_ctrl___dma45___width 1 -#define reg_config_rw_clk_ctrl___dma45___bit 5 -#define reg_config_rw_clk_ctrl___dma67___lsb 6 -#define reg_config_rw_clk_ctrl___dma67___width 1 -#define reg_config_rw_clk_ctrl___dma67___bit 6 -#define reg_config_rw_clk_ctrl___dma89_strcop___lsb 7 -#define reg_config_rw_clk_ctrl___dma89_strcop___width 1 -#define reg_config_rw_clk_ctrl___dma89_strcop___bit 7 -#define reg_config_rw_clk_ctrl___bif___lsb 8 -#define reg_config_rw_clk_ctrl___bif___width 1 -#define reg_config_rw_clk_ctrl___bif___bit 8 -#define reg_config_rw_clk_ctrl___fix_io___lsb 9 -#define reg_config_rw_clk_ctrl___fix_io___width 1 -#define reg_config_rw_clk_ctrl___fix_io___bit 9 -#define reg_config_rw_clk_ctrl_offset 4 - -/* Register rw_pad_ctrl, scope config, type rw */ -#define reg_config_rw_pad_ctrl___usb_susp___lsb 0 -#define reg_config_rw_pad_ctrl___usb_susp___width 1 -#define reg_config_rw_pad_ctrl___usb_susp___bit 0 -#define reg_config_rw_pad_ctrl___phyrst_n___lsb 1 -#define reg_config_rw_pad_ctrl___phyrst_n___width 1 -#define reg_config_rw_pad_ctrl___phyrst_n___bit 1 -#define reg_config_rw_pad_ctrl_offset 8 - - -/* Constants */ -#define regk_config_bw16 0x00000000 -#define regk_config_bw32 0x00000001 -#define regk_config_master 0x00000005 -#define regk_config_nand 0x00000003 -#define regk_config_net_rx 0x00000001 -#define regk_config_net_tx_rx 0x00000002 -#define regk_config_no 0x00000000 -#define regk_config_none 0x00000007 -#define regk_config_nor 0x00000000 -#define regk_config_rw_clk_ctrl_default 0x00000002 -#define regk_config_rw_pad_ctrl_default 0x00000000 -#define regk_config_ser 0x00000004 -#define regk_config_slave 0x00000006 -#define regk_config_yes 0x00000001 -#endif /* __config_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h b/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h deleted file mode 100644 index 8370aee8a14a..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version - from ../../inst/crisp/doc/cpu_vect.r -version . */ - -#ifndef _______INST_CRISP_DOC_CPU_VECT_R -#define _______INST_CRISP_DOC_CPU_VECT_R -#define NMI_INTR_VECT 0x00 -#define RESERVED_1_INTR_VECT 0x01 -#define RESERVED_2_INTR_VECT 0x02 -#define SINGLE_STEP_INTR_VECT 0x03 -#define INSTR_TLB_REFILL_INTR_VECT 0x04 -#define INSTR_TLB_INV_INTR_VECT 0x05 -#define INSTR_TLB_ACC_INTR_VECT 0x06 -#define TLB_EX_INTR_VECT 0x07 -#define DATA_TLB_REFILL_INTR_VECT 0x08 -#define DATA_TLB_INV_INTR_VECT 0x09 -#define DATA_TLB_ACC_INTR_VECT 0x0a -#define DATA_TLB_WE_INTR_VECT 0x0b -#define HW_BP_INTR_VECT 0x0c -#define RESERVED_D_INTR_VECT 0x0d -#define RESERVED_E_INTR_VECT 0x0e -#define RESERVED_F_INTR_VECT 0x0f -#define BREAK_0_INTR_VECT 0x10 -#define BREAK_1_INTR_VECT 0x11 -#define BREAK_2_INTR_VECT 0x12 -#define BREAK_3_INTR_VECT 0x13 -#define BREAK_4_INTR_VECT 0x14 -#define BREAK_5_INTR_VECT 0x15 -#define BREAK_6_INTR_VECT 0x16 -#define BREAK_7_INTR_VECT 0x17 -#define BREAK_8_INTR_VECT 0x18 -#define BREAK_9_INTR_VECT 0x19 -#define BREAK_10_INTR_VECT 0x1a -#define BREAK_11_INTR_VECT 0x1b -#define BREAK_12_INTR_VECT 0x1c -#define BREAK_13_INTR_VECT 0x1d -#define BREAK_14_INTR_VECT 0x1e -#define BREAK_15_INTR_VECT 0x1f -#define MULTIPLE_INTR_VECT 0x30 - -#endif diff --git a/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h deleted file mode 100644 index 7f768db272e2..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h +++ /dev/null @@ -1,114 +0,0 @@ -#ifndef __cris_defs_asm_h -#define __cris_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/crisp/doc/cris.r - * id: cris.r,v 1.6 2004/05/05 07:41:12 perz Exp - * last modfied: Mon Apr 11 16:06:39 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/cris_defs_asm.h ../../inst/crisp/doc/cris.r - * id: $Id: cris_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_gc_cfg, scope cris, type rw */ -#define reg_cris_rw_gc_cfg___ic___lsb 0 -#define reg_cris_rw_gc_cfg___ic___width 1 -#define reg_cris_rw_gc_cfg___ic___bit 0 -#define reg_cris_rw_gc_cfg___dc___lsb 1 -#define reg_cris_rw_gc_cfg___dc___width 1 -#define reg_cris_rw_gc_cfg___dc___bit 1 -#define reg_cris_rw_gc_cfg___im___lsb 2 -#define reg_cris_rw_gc_cfg___im___width 1 -#define reg_cris_rw_gc_cfg___im___bit 2 -#define reg_cris_rw_gc_cfg___dm___lsb 3 -#define reg_cris_rw_gc_cfg___dm___width 1 -#define reg_cris_rw_gc_cfg___dm___bit 3 -#define reg_cris_rw_gc_cfg___gb___lsb 4 -#define reg_cris_rw_gc_cfg___gb___width 1 -#define reg_cris_rw_gc_cfg___gb___bit 4 -#define reg_cris_rw_gc_cfg___gk___lsb 5 -#define reg_cris_rw_gc_cfg___gk___width 1 -#define reg_cris_rw_gc_cfg___gk___bit 5 -#define reg_cris_rw_gc_cfg___gp___lsb 6 -#define reg_cris_rw_gc_cfg___gp___width 1 -#define reg_cris_rw_gc_cfg___gp___bit 6 -#define reg_cris_rw_gc_cfg_offset 0 - -/* Register rw_gc_ccs, scope cris, type rw */ -#define reg_cris_rw_gc_ccs_offset 4 - -/* Register rw_gc_srs, scope cris, type rw */ -#define reg_cris_rw_gc_srs___srs___lsb 0 -#define reg_cris_rw_gc_srs___srs___width 8 -#define reg_cris_rw_gc_srs_offset 8 - -/* Register rw_gc_nrp, scope cris, type rw */ -#define reg_cris_rw_gc_nrp_offset 12 - -/* Register rw_gc_exs, scope cris, type rw */ -#define reg_cris_rw_gc_exs_offset 16 - -/* Register rw_gc_eda, scope cris, type rw */ -#define reg_cris_rw_gc_eda_offset 20 - -/* Register rw_gc_r0, scope cris, type rw */ -#define reg_cris_rw_gc_r0_offset 32 - -/* Register rw_gc_r1, scope cris, type rw */ -#define reg_cris_rw_gc_r1_offset 36 - -/* Register rw_gc_r2, scope cris, type rw */ -#define reg_cris_rw_gc_r2_offset 40 - -/* Register rw_gc_r3, scope cris, type rw */ -#define reg_cris_rw_gc_r3_offset 44 - - -/* Constants */ -#define regk_cris_no 0x00000000 -#define regk_cris_rw_gc_cfg_default 0x00000000 -#define regk_cris_yes 0x00000001 -#endif /* __cris_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/cris_supp_reg.h b/include/asm-cris/arch-v32/hwregs/asm/cris_supp_reg.h deleted file mode 100644 index 7d3689a6f80d..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/cris_supp_reg.h +++ /dev/null @@ -1,10 +0,0 @@ -#define RW_GC_CFG 0 -#define RW_GC_CCS 1 -#define RW_GC_SRS 2 -#define RW_GC_NRP 3 -#define RW_GC_EXS 4 -#define RW_GC_EDA 5 -#define RW_GC_R0 8 -#define RW_GC_R1 9 -#define RW_GC_R2 10 -#define RW_GC_R3 11 diff --git a/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h deleted file mode 100644 index 0cb71bc127ae..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h +++ /dev/null @@ -1,368 +0,0 @@ -#ifndef __dma_defs_asm_h -#define __dma_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/dma/inst/dma_common/rtl/dma_regdes.r - * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp - * last modfied: Mon Apr 11 16:06:51 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/dma_defs_asm.h ../../inst/dma/inst/dma_common/rtl/dma_regdes.r - * id: $Id: dma_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_data, scope dma, type rw */ -#define reg_dma_rw_data_offset 0 - -/* Register rw_data_next, scope dma, type rw */ -#define reg_dma_rw_data_next_offset 4 - -/* Register rw_data_buf, scope dma, type rw */ -#define reg_dma_rw_data_buf_offset 8 - -/* Register rw_data_ctrl, scope dma, type rw */ -#define reg_dma_rw_data_ctrl___eol___lsb 0 -#define reg_dma_rw_data_ctrl___eol___width 1 -#define reg_dma_rw_data_ctrl___eol___bit 0 -#define reg_dma_rw_data_ctrl___out_eop___lsb 3 -#define reg_dma_rw_data_ctrl___out_eop___width 1 -#define reg_dma_rw_data_ctrl___out_eop___bit 3 -#define reg_dma_rw_data_ctrl___intr___lsb 4 -#define reg_dma_rw_data_ctrl___intr___width 1 -#define reg_dma_rw_data_ctrl___intr___bit 4 -#define reg_dma_rw_data_ctrl___wait___lsb 5 -#define reg_dma_rw_data_ctrl___wait___width 1 -#define reg_dma_rw_data_ctrl___wait___bit 5 -#define reg_dma_rw_data_ctrl_offset 12 - -/* Register rw_data_stat, scope dma, type rw */ -#define reg_dma_rw_data_stat___in_eop___lsb 3 -#define reg_dma_rw_data_stat___in_eop___width 1 -#define reg_dma_rw_data_stat___in_eop___bit 3 -#define reg_dma_rw_data_stat_offset 16 - -/* Register rw_data_md, scope dma, type rw */ -#define reg_dma_rw_data_md___md___lsb 0 -#define reg_dma_rw_data_md___md___width 16 -#define reg_dma_rw_data_md_offset 20 - -/* Register rw_data_md_s, scope dma, type rw */ -#define reg_dma_rw_data_md_s___md_s___lsb 0 -#define reg_dma_rw_data_md_s___md_s___width 16 -#define reg_dma_rw_data_md_s_offset 24 - -/* Register rw_data_after, scope dma, type rw */ -#define reg_dma_rw_data_after_offset 28 - -/* Register rw_ctxt, scope dma, type rw */ -#define reg_dma_rw_ctxt_offset 32 - -/* Register rw_ctxt_next, scope dma, type rw */ -#define reg_dma_rw_ctxt_next_offset 36 - -/* Register rw_ctxt_ctrl, scope dma, type rw */ -#define reg_dma_rw_ctxt_ctrl___eol___lsb 0 -#define reg_dma_rw_ctxt_ctrl___eol___width 1 -#define reg_dma_rw_ctxt_ctrl___eol___bit 0 -#define reg_dma_rw_ctxt_ctrl___intr___lsb 4 -#define reg_dma_rw_ctxt_ctrl___intr___width 1 -#define reg_dma_rw_ctxt_ctrl___intr___bit 4 -#define reg_dma_rw_ctxt_ctrl___store_mode___lsb 6 -#define reg_dma_rw_ctxt_ctrl___store_mode___width 1 -#define reg_dma_rw_ctxt_ctrl___store_mode___bit 6 -#define reg_dma_rw_ctxt_ctrl___en___lsb 7 -#define reg_dma_rw_ctxt_ctrl___en___width 1 -#define reg_dma_rw_ctxt_ctrl___en___bit 7 -#define reg_dma_rw_ctxt_ctrl_offset 40 - -/* Register rw_ctxt_stat, scope dma, type rw */ -#define reg_dma_rw_ctxt_stat___dis___lsb 7 -#define reg_dma_rw_ctxt_stat___dis___width 1 -#define reg_dma_rw_ctxt_stat___dis___bit 7 -#define reg_dma_rw_ctxt_stat_offset 44 - -/* Register rw_ctxt_md0, scope dma, type rw */ -#define reg_dma_rw_ctxt_md0___md0___lsb 0 -#define reg_dma_rw_ctxt_md0___md0___width 16 -#define reg_dma_rw_ctxt_md0_offset 48 - -/* Register rw_ctxt_md0_s, scope dma, type rw */ -#define reg_dma_rw_ctxt_md0_s___md0_s___lsb 0 -#define reg_dma_rw_ctxt_md0_s___md0_s___width 16 -#define reg_dma_rw_ctxt_md0_s_offset 52 - -/* Register rw_ctxt_md1, scope dma, type rw */ -#define reg_dma_rw_ctxt_md1_offset 56 - -/* Register rw_ctxt_md1_s, scope dma, type rw */ -#define reg_dma_rw_ctxt_md1_s_offset 60 - -/* Register rw_ctxt_md2, scope dma, type rw */ -#define reg_dma_rw_ctxt_md2_offset 64 - -/* Register rw_ctxt_md2_s, scope dma, type rw */ -#define reg_dma_rw_ctxt_md2_s_offset 68 - -/* Register rw_ctxt_md3, scope dma, type rw */ -#define reg_dma_rw_ctxt_md3_offset 72 - -/* Register rw_ctxt_md3_s, scope dma, type rw */ -#define reg_dma_rw_ctxt_md3_s_offset 76 - -/* Register rw_ctxt_md4, scope dma, type rw */ -#define reg_dma_rw_ctxt_md4_offset 80 - -/* Register rw_ctxt_md4_s, scope dma, type rw */ -#define reg_dma_rw_ctxt_md4_s_offset 84 - -/* Register rw_saved_data, scope dma, type rw */ -#define reg_dma_rw_saved_data_offset 88 - -/* Register rw_saved_data_buf, scope dma, type rw */ -#define reg_dma_rw_saved_data_buf_offset 92 - -/* Register rw_group, scope dma, type rw */ -#define reg_dma_rw_group_offset 96 - -/* Register rw_group_next, scope dma, type rw */ -#define reg_dma_rw_group_next_offset 100 - -/* Register rw_group_ctrl, scope dma, type rw */ -#define reg_dma_rw_group_ctrl___eol___lsb 0 -#define reg_dma_rw_group_ctrl___eol___width 1 -#define reg_dma_rw_group_ctrl___eol___bit 0 -#define reg_dma_rw_group_ctrl___tol___lsb 1 -#define reg_dma_rw_group_ctrl___tol___width 1 -#define reg_dma_rw_group_ctrl___tol___bit 1 -#define reg_dma_rw_group_ctrl___bol___lsb 2 -#define reg_dma_rw_group_ctrl___bol___width 1 -#define reg_dma_rw_group_ctrl___bol___bit 2 -#define reg_dma_rw_group_ctrl___intr___lsb 4 -#define reg_dma_rw_group_ctrl___intr___width 1 -#define reg_dma_rw_group_ctrl___intr___bit 4 -#define reg_dma_rw_group_ctrl___en___lsb 7 -#define reg_dma_rw_group_ctrl___en___width 1 -#define reg_dma_rw_group_ctrl___en___bit 7 -#define reg_dma_rw_group_ctrl_offset 104 - -/* Register rw_group_stat, scope dma, type rw */ -#define reg_dma_rw_group_stat___dis___lsb 7 -#define reg_dma_rw_group_stat___dis___width 1 -#define reg_dma_rw_group_stat___dis___bit 7 -#define reg_dma_rw_group_stat_offset 108 - -/* Register rw_group_md, scope dma, type rw */ -#define reg_dma_rw_group_md___md___lsb 0 -#define reg_dma_rw_group_md___md___width 16 -#define reg_dma_rw_group_md_offset 112 - -/* Register rw_group_md_s, scope dma, type rw */ -#define reg_dma_rw_group_md_s___md_s___lsb 0 -#define reg_dma_rw_group_md_s___md_s___width 16 -#define reg_dma_rw_group_md_s_offset 116 - -/* Register rw_group_up, scope dma, type rw */ -#define reg_dma_rw_group_up_offset 120 - -/* Register rw_group_down, scope dma, type rw */ -#define reg_dma_rw_group_down_offset 124 - -/* Register rw_cmd, scope dma, type rw */ -#define reg_dma_rw_cmd___cont_data___lsb 0 -#define reg_dma_rw_cmd___cont_data___width 1 -#define reg_dma_rw_cmd___cont_data___bit 0 -#define reg_dma_rw_cmd_offset 128 - -/* Register rw_cfg, scope dma, type rw */ -#define reg_dma_rw_cfg___en___lsb 0 -#define reg_dma_rw_cfg___en___width 1 -#define reg_dma_rw_cfg___en___bit 0 -#define reg_dma_rw_cfg___stop___lsb 1 -#define reg_dma_rw_cfg___stop___width 1 -#define reg_dma_rw_cfg___stop___bit 1 -#define reg_dma_rw_cfg_offset 132 - -/* Register rw_stat, scope dma, type rw */ -#define reg_dma_rw_stat___mode___lsb 0 -#define reg_dma_rw_stat___mode___width 5 -#define reg_dma_rw_stat___list_state___lsb 5 -#define reg_dma_rw_stat___list_state___width 3 -#define reg_dma_rw_stat___stream_cmd_src___lsb 8 -#define reg_dma_rw_stat___stream_cmd_src___width 8 -#define reg_dma_rw_stat___buf___lsb 24 -#define reg_dma_rw_stat___buf___width 8 -#define reg_dma_rw_stat_offset 136 - -/* Register rw_intr_mask, scope dma, type rw */ -#define reg_dma_rw_intr_mask___group___lsb 0 -#define reg_dma_rw_intr_mask___group___width 1 -#define reg_dma_rw_intr_mask___group___bit 0 -#define reg_dma_rw_intr_mask___ctxt___lsb 1 -#define reg_dma_rw_intr_mask___ctxt___width 1 -#define reg_dma_rw_intr_mask___ctxt___bit 1 -#define reg_dma_rw_intr_mask___data___lsb 2 -#define reg_dma_rw_intr_mask___data___width 1 -#define reg_dma_rw_intr_mask___data___bit 2 -#define reg_dma_rw_intr_mask___in_eop___lsb 3 -#define reg_dma_rw_intr_mask___in_eop___width 1 -#define reg_dma_rw_intr_mask___in_eop___bit 3 -#define reg_dma_rw_intr_mask___stream_cmd___lsb 4 -#define reg_dma_rw_intr_mask___stream_cmd___width 1 -#define reg_dma_rw_intr_mask___stream_cmd___bit 4 -#define reg_dma_rw_intr_mask_offset 140 - -/* Register rw_ack_intr, scope dma, type rw */ -#define reg_dma_rw_ack_intr___group___lsb 0 -#define reg_dma_rw_ack_intr___group___width 1 -#define reg_dma_rw_ack_intr___group___bit 0 -#define reg_dma_rw_ack_intr___ctxt___lsb 1 -#define reg_dma_rw_ack_intr___ctxt___width 1 -#define reg_dma_rw_ack_intr___ctxt___bit 1 -#define reg_dma_rw_ack_intr___data___lsb 2 -#define reg_dma_rw_ack_intr___data___width 1 -#define reg_dma_rw_ack_intr___data___bit 2 -#define reg_dma_rw_ack_intr___in_eop___lsb 3 -#define reg_dma_rw_ack_intr___in_eop___width 1 -#define reg_dma_rw_ack_intr___in_eop___bit 3 -#define reg_dma_rw_ack_intr___stream_cmd___lsb 4 -#define reg_dma_rw_ack_intr___stream_cmd___width 1 -#define reg_dma_rw_ack_intr___stream_cmd___bit 4 -#define reg_dma_rw_ack_intr_offset 144 - -/* Register r_intr, scope dma, type r */ -#define reg_dma_r_intr___group___lsb 0 -#define reg_dma_r_intr___group___width 1 -#define reg_dma_r_intr___group___bit 0 -#define reg_dma_r_intr___ctxt___lsb 1 -#define reg_dma_r_intr___ctxt___width 1 -#define reg_dma_r_intr___ctxt___bit 1 -#define reg_dma_r_intr___data___lsb 2 -#define reg_dma_r_intr___data___width 1 -#define reg_dma_r_intr___data___bit 2 -#define reg_dma_r_intr___in_eop___lsb 3 -#define reg_dma_r_intr___in_eop___width 1 -#define reg_dma_r_intr___in_eop___bit 3 -#define reg_dma_r_intr___stream_cmd___lsb 4 -#define reg_dma_r_intr___stream_cmd___width 1 -#define reg_dma_r_intr___stream_cmd___bit 4 -#define reg_dma_r_intr_offset 148 - -/* Register r_masked_intr, scope dma, type r */ -#define reg_dma_r_masked_intr___group___lsb 0 -#define reg_dma_r_masked_intr___group___width 1 -#define reg_dma_r_masked_intr___group___bit 0 -#define reg_dma_r_masked_intr___ctxt___lsb 1 -#define reg_dma_r_masked_intr___ctxt___width 1 -#define reg_dma_r_masked_intr___ctxt___bit 1 -#define reg_dma_r_masked_intr___data___lsb 2 -#define reg_dma_r_masked_intr___data___width 1 -#define reg_dma_r_masked_intr___data___bit 2 -#define reg_dma_r_masked_intr___in_eop___lsb 3 -#define reg_dma_r_masked_intr___in_eop___width 1 -#define reg_dma_r_masked_intr___in_eop___bit 3 -#define reg_dma_r_masked_intr___stream_cmd___lsb 4 -#define reg_dma_r_masked_intr___stream_cmd___width 1 -#define reg_dma_r_masked_intr___stream_cmd___bit 4 -#define reg_dma_r_masked_intr_offset 152 - -/* Register rw_stream_cmd, scope dma, type rw */ -#define reg_dma_rw_stream_cmd___cmd___lsb 0 -#define reg_dma_rw_stream_cmd___cmd___width 10 -#define reg_dma_rw_stream_cmd___n___lsb 16 -#define reg_dma_rw_stream_cmd___n___width 8 -#define reg_dma_rw_stream_cmd___busy___lsb 31 -#define reg_dma_rw_stream_cmd___busy___width 1 -#define reg_dma_rw_stream_cmd___busy___bit 31 -#define reg_dma_rw_stream_cmd_offset 156 - - -/* Constants */ -#define regk_dma_ack_pkt 0x00000100 -#define regk_dma_anytime 0x00000001 -#define regk_dma_array 0x00000008 -#define regk_dma_burst 0x00000020 -#define regk_dma_client 0x00000002 -#define regk_dma_copy_next 0x00000010 -#define regk_dma_copy_up 0x00000020 -#define regk_dma_data_at_eol 0x00000001 -#define regk_dma_dis_c 0x00000010 -#define regk_dma_dis_g 0x00000020 -#define regk_dma_idle 0x00000001 -#define regk_dma_intern 0x00000004 -#define regk_dma_load_c 0x00000200 -#define regk_dma_load_c_n 0x00000280 -#define regk_dma_load_c_next 0x00000240 -#define regk_dma_load_d 0x00000140 -#define regk_dma_load_g 0x00000300 -#define regk_dma_load_g_down 0x000003c0 -#define regk_dma_load_g_next 0x00000340 -#define regk_dma_load_g_up 0x00000380 -#define regk_dma_next_en 0x00000010 -#define regk_dma_next_pkt 0x00000010 -#define regk_dma_no 0x00000000 -#define regk_dma_only_at_wait 0x00000000 -#define regk_dma_restore 0x00000020 -#define regk_dma_rst 0x00000001 -#define regk_dma_running 0x00000004 -#define regk_dma_rw_cfg_default 0x00000000 -#define regk_dma_rw_cmd_default 0x00000000 -#define regk_dma_rw_intr_mask_default 0x00000000 -#define regk_dma_rw_stat_default 0x00000101 -#define regk_dma_rw_stream_cmd_default 0x00000000 -#define regk_dma_save_down 0x00000020 -#define regk_dma_save_up 0x00000020 -#define regk_dma_set_reg 0x00000050 -#define regk_dma_set_w_size1 0x00000190 -#define regk_dma_set_w_size2 0x000001a0 -#define regk_dma_set_w_size4 0x000001c0 -#define regk_dma_stopped 0x00000002 -#define regk_dma_store_c 0x00000002 -#define regk_dma_store_descr 0x00000000 -#define regk_dma_store_g 0x00000004 -#define regk_dma_store_md 0x00000001 -#define regk_dma_sw 0x00000008 -#define regk_dma_update_down 0x00000020 -#define regk_dma_yes 0x00000001 -#endif /* __dma_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h deleted file mode 100644 index c9f49864831b..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h +++ /dev/null @@ -1,498 +0,0 @@ -#ifndef __eth_defs_asm_h -#define __eth_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/eth/rtl/eth_regs.r - * id: eth_regs.r,v 1.11 2005/02/09 10:48:38 kriskn Exp - * last modfied: Mon Apr 11 16:07:03 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/eth_defs_asm.h ../../inst/eth/rtl/eth_regs.r - * id: $Id: eth_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_ma0_lo, scope eth, type rw */ -#define reg_eth_rw_ma0_lo___addr___lsb 0 -#define reg_eth_rw_ma0_lo___addr___width 32 -#define reg_eth_rw_ma0_lo_offset 0 - -/* Register rw_ma0_hi, scope eth, type rw */ -#define reg_eth_rw_ma0_hi___addr___lsb 0 -#define reg_eth_rw_ma0_hi___addr___width 16 -#define reg_eth_rw_ma0_hi_offset 4 - -/* Register rw_ma1_lo, scope eth, type rw */ -#define reg_eth_rw_ma1_lo___addr___lsb 0 -#define reg_eth_rw_ma1_lo___addr___width 32 -#define reg_eth_rw_ma1_lo_offset 8 - -/* Register rw_ma1_hi, scope eth, type rw */ -#define reg_eth_rw_ma1_hi___addr___lsb 0 -#define reg_eth_rw_ma1_hi___addr___width 16 -#define reg_eth_rw_ma1_hi_offset 12 - -/* Register rw_ga_lo, scope eth, type rw */ -#define reg_eth_rw_ga_lo___table___lsb 0 -#define reg_eth_rw_ga_lo___table___width 32 -#define reg_eth_rw_ga_lo_offset 16 - -/* Register rw_ga_hi, scope eth, type rw */ -#define reg_eth_rw_ga_hi___table___lsb 0 -#define reg_eth_rw_ga_hi___table___width 32 -#define reg_eth_rw_ga_hi_offset 20 - -/* Register rw_gen_ctrl, scope eth, type rw */ -#define reg_eth_rw_gen_ctrl___en___lsb 0 -#define reg_eth_rw_gen_ctrl___en___width 1 -#define reg_eth_rw_gen_ctrl___en___bit 0 -#define reg_eth_rw_gen_ctrl___phy___lsb 1 -#define reg_eth_rw_gen_ctrl___phy___width 2 -#define reg_eth_rw_gen_ctrl___protocol___lsb 3 -#define reg_eth_rw_gen_ctrl___protocol___width 1 -#define reg_eth_rw_gen_ctrl___protocol___bit 3 -#define reg_eth_rw_gen_ctrl___loopback___lsb 4 -#define reg_eth_rw_gen_ctrl___loopback___width 1 -#define reg_eth_rw_gen_ctrl___loopback___bit 4 -#define reg_eth_rw_gen_ctrl___flow_ctrl_dis___lsb 5 -#define reg_eth_rw_gen_ctrl___flow_ctrl_dis___width 1 -#define reg_eth_rw_gen_ctrl___flow_ctrl_dis___bit 5 -#define reg_eth_rw_gen_ctrl_offset 24 - -/* Register rw_rec_ctrl, scope eth, type rw */ -#define reg_eth_rw_rec_ctrl___ma0___lsb 0 -#define reg_eth_rw_rec_ctrl___ma0___width 1 -#define reg_eth_rw_rec_ctrl___ma0___bit 0 -#define reg_eth_rw_rec_ctrl___ma1___lsb 1 -#define reg_eth_rw_rec_ctrl___ma1___width 1 -#define reg_eth_rw_rec_ctrl___ma1___bit 1 -#define reg_eth_rw_rec_ctrl___individual___lsb 2 -#define reg_eth_rw_rec_ctrl___individual___width 1 -#define reg_eth_rw_rec_ctrl___individual___bit 2 -#define reg_eth_rw_rec_ctrl___broadcast___lsb 3 -#define reg_eth_rw_rec_ctrl___broadcast___width 1 -#define reg_eth_rw_rec_ctrl___broadcast___bit 3 -#define reg_eth_rw_rec_ctrl___undersize___lsb 4 -#define reg_eth_rw_rec_ctrl___undersize___width 1 -#define reg_eth_rw_rec_ctrl___undersize___bit 4 -#define reg_eth_rw_rec_ctrl___oversize___lsb 5 -#define reg_eth_rw_rec_ctrl___oversize___width 1 -#define reg_eth_rw_rec_ctrl___oversize___bit 5 -#define reg_eth_rw_rec_ctrl___bad_crc___lsb 6 -#define reg_eth_rw_rec_ctrl___bad_crc___width 1 -#define reg_eth_rw_rec_ctrl___bad_crc___bit 6 -#define reg_eth_rw_rec_ctrl___duplex___lsb 7 -#define reg_eth_rw_rec_ctrl___duplex___width 1 -#define reg_eth_rw_rec_ctrl___duplex___bit 7 -#define reg_eth_rw_rec_ctrl___max_size___lsb 8 -#define reg_eth_rw_rec_ctrl___max_size___width 1 -#define reg_eth_rw_rec_ctrl___max_size___bit 8 -#define reg_eth_rw_rec_ctrl_offset 28 - -/* Register rw_tr_ctrl, scope eth, type rw */ -#define reg_eth_rw_tr_ctrl___crc___lsb 0 -#define reg_eth_rw_tr_ctrl___crc___width 1 -#define reg_eth_rw_tr_ctrl___crc___bit 0 -#define reg_eth_rw_tr_ctrl___pad___lsb 1 -#define reg_eth_rw_tr_ctrl___pad___width 1 -#define reg_eth_rw_tr_ctrl___pad___bit 1 -#define reg_eth_rw_tr_ctrl___retry___lsb 2 -#define reg_eth_rw_tr_ctrl___retry___width 1 -#define reg_eth_rw_tr_ctrl___retry___bit 2 -#define reg_eth_rw_tr_ctrl___ignore_col___lsb 3 -#define reg_eth_rw_tr_ctrl___ignore_col___width 1 -#define reg_eth_rw_tr_ctrl___ignore_col___bit 3 -#define reg_eth_rw_tr_ctrl___cancel___lsb 4 -#define reg_eth_rw_tr_ctrl___cancel___width 1 -#define reg_eth_rw_tr_ctrl___cancel___bit 4 -#define reg_eth_rw_tr_ctrl___hsh_delay___lsb 5 -#define reg_eth_rw_tr_ctrl___hsh_delay___width 1 -#define reg_eth_rw_tr_ctrl___hsh_delay___bit 5 -#define reg_eth_rw_tr_ctrl___ignore_crs___lsb 6 -#define reg_eth_rw_tr_ctrl___ignore_crs___width 1 -#define reg_eth_rw_tr_ctrl___ignore_crs___bit 6 -#define reg_eth_rw_tr_ctrl_offset 32 - -/* Register rw_clr_err, scope eth, type rw */ -#define reg_eth_rw_clr_err___clr___lsb 0 -#define reg_eth_rw_clr_err___clr___width 1 -#define reg_eth_rw_clr_err___clr___bit 0 -#define reg_eth_rw_clr_err_offset 36 - -/* Register rw_mgm_ctrl, scope eth, type rw */ -#define reg_eth_rw_mgm_ctrl___mdio___lsb 0 -#define reg_eth_rw_mgm_ctrl___mdio___width 1 -#define reg_eth_rw_mgm_ctrl___mdio___bit 0 -#define reg_eth_rw_mgm_ctrl___mdoe___lsb 1 -#define reg_eth_rw_mgm_ctrl___mdoe___width 1 -#define reg_eth_rw_mgm_ctrl___mdoe___bit 1 -#define reg_eth_rw_mgm_ctrl___mdc___lsb 2 -#define reg_eth_rw_mgm_ctrl___mdc___width 1 -#define reg_eth_rw_mgm_ctrl___mdc___bit 2 -#define reg_eth_rw_mgm_ctrl___phyclk___lsb 3 -#define reg_eth_rw_mgm_ctrl___phyclk___width 1 -#define reg_eth_rw_mgm_ctrl___phyclk___bit 3 -#define reg_eth_rw_mgm_ctrl___txdata___lsb 4 -#define reg_eth_rw_mgm_ctrl___txdata___width 4 -#define reg_eth_rw_mgm_ctrl___txen___lsb 8 -#define reg_eth_rw_mgm_ctrl___txen___width 1 -#define reg_eth_rw_mgm_ctrl___txen___bit 8 -#define reg_eth_rw_mgm_ctrl_offset 40 - -/* Register r_stat, scope eth, type r */ -#define reg_eth_r_stat___mdio___lsb 0 -#define reg_eth_r_stat___mdio___width 1 -#define reg_eth_r_stat___mdio___bit 0 -#define reg_eth_r_stat___exc_col___lsb 1 -#define reg_eth_r_stat___exc_col___width 1 -#define reg_eth_r_stat___exc_col___bit 1 -#define reg_eth_r_stat___urun___lsb 2 -#define reg_eth_r_stat___urun___width 1 -#define reg_eth_r_stat___urun___bit 2 -#define reg_eth_r_stat___phyclk___lsb 3 -#define reg_eth_r_stat___phyclk___width 1 -#define reg_eth_r_stat___phyclk___bit 3 -#define reg_eth_r_stat___txdata___lsb 4 -#define reg_eth_r_stat___txdata___width 4 -#define reg_eth_r_stat___txen___lsb 8 -#define reg_eth_r_stat___txen___width 1 -#define reg_eth_r_stat___txen___bit 8 -#define reg_eth_r_stat___col___lsb 9 -#define reg_eth_r_stat___col___width 1 -#define reg_eth_r_stat___col___bit 9 -#define reg_eth_r_stat___crs___lsb 10 -#define reg_eth_r_stat___crs___width 1 -#define reg_eth_r_stat___crs___bit 10 -#define reg_eth_r_stat___txclk___lsb 11 -#define reg_eth_r_stat___txclk___width 1 -#define reg_eth_r_stat___txclk___bit 11 -#define reg_eth_r_stat___rxdata___lsb 12 -#define reg_eth_r_stat___rxdata___width 4 -#define reg_eth_r_stat___rxer___lsb 16 -#define reg_eth_r_stat___rxer___width 1 -#define reg_eth_r_stat___rxer___bit 16 -#define reg_eth_r_stat___rxdv___lsb 17 -#define reg_eth_r_stat___rxdv___width 1 -#define reg_eth_r_stat___rxdv___bit 17 -#define reg_eth_r_stat___rxclk___lsb 18 -#define reg_eth_r_stat___rxclk___width 1 -#define reg_eth_r_stat___rxclk___bit 18 -#define reg_eth_r_stat_offset 44 - -/* Register rs_rec_cnt, scope eth, type rs */ -#define reg_eth_rs_rec_cnt___crc_err___lsb 0 -#define reg_eth_rs_rec_cnt___crc_err___width 8 -#define reg_eth_rs_rec_cnt___align_err___lsb 8 -#define reg_eth_rs_rec_cnt___align_err___width 8 -#define reg_eth_rs_rec_cnt___oversize___lsb 16 -#define reg_eth_rs_rec_cnt___oversize___width 8 -#define reg_eth_rs_rec_cnt___congestion___lsb 24 -#define reg_eth_rs_rec_cnt___congestion___width 8 -#define reg_eth_rs_rec_cnt_offset 48 - -/* Register r_rec_cnt, scope eth, type r */ -#define reg_eth_r_rec_cnt___crc_err___lsb 0 -#define reg_eth_r_rec_cnt___crc_err___width 8 -#define reg_eth_r_rec_cnt___align_err___lsb 8 -#define reg_eth_r_rec_cnt___align_err___width 8 -#define reg_eth_r_rec_cnt___oversize___lsb 16 -#define reg_eth_r_rec_cnt___oversize___width 8 -#define reg_eth_r_rec_cnt___congestion___lsb 24 -#define reg_eth_r_rec_cnt___congestion___width 8 -#define reg_eth_r_rec_cnt_offset 52 - -/* Register rs_tr_cnt, scope eth, type rs */ -#define reg_eth_rs_tr_cnt___single_col___lsb 0 -#define reg_eth_rs_tr_cnt___single_col___width 8 -#define reg_eth_rs_tr_cnt___mult_col___lsb 8 -#define reg_eth_rs_tr_cnt___mult_col___width 8 -#define reg_eth_rs_tr_cnt___late_col___lsb 16 -#define reg_eth_rs_tr_cnt___late_col___width 8 -#define reg_eth_rs_tr_cnt___deferred___lsb 24 -#define reg_eth_rs_tr_cnt___deferred___width 8 -#define reg_eth_rs_tr_cnt_offset 56 - -/* Register r_tr_cnt, scope eth, type r */ -#define reg_eth_r_tr_cnt___single_col___lsb 0 -#define reg_eth_r_tr_cnt___single_col___width 8 -#define reg_eth_r_tr_cnt___mult_col___lsb 8 -#define reg_eth_r_tr_cnt___mult_col___width 8 -#define reg_eth_r_tr_cnt___late_col___lsb 16 -#define reg_eth_r_tr_cnt___late_col___width 8 -#define reg_eth_r_tr_cnt___deferred___lsb 24 -#define reg_eth_r_tr_cnt___deferred___width 8 -#define reg_eth_r_tr_cnt_offset 60 - -/* Register rs_phy_cnt, scope eth, type rs */ -#define reg_eth_rs_phy_cnt___carrier_loss___lsb 0 -#define reg_eth_rs_phy_cnt___carrier_loss___width 8 -#define reg_eth_rs_phy_cnt___sqe_err___lsb 8 -#define reg_eth_rs_phy_cnt___sqe_err___width 8 -#define reg_eth_rs_phy_cnt_offset 64 - -/* Register r_phy_cnt, scope eth, type r */ -#define reg_eth_r_phy_cnt___carrier_loss___lsb 0 -#define reg_eth_r_phy_cnt___carrier_loss___width 8 -#define reg_eth_r_phy_cnt___sqe_err___lsb 8 -#define reg_eth_r_phy_cnt___sqe_err___width 8 -#define reg_eth_r_phy_cnt_offset 68 - -/* Register rw_test_ctrl, scope eth, type rw */ -#define reg_eth_rw_test_ctrl___snmp_inc___lsb 0 -#define reg_eth_rw_test_ctrl___snmp_inc___width 1 -#define reg_eth_rw_test_ctrl___snmp_inc___bit 0 -#define reg_eth_rw_test_ctrl___snmp___lsb 1 -#define reg_eth_rw_test_ctrl___snmp___width 1 -#define reg_eth_rw_test_ctrl___snmp___bit 1 -#define reg_eth_rw_test_ctrl___backoff___lsb 2 -#define reg_eth_rw_test_ctrl___backoff___width 1 -#define reg_eth_rw_test_ctrl___backoff___bit 2 -#define reg_eth_rw_test_ctrl_offset 72 - -/* Register rw_intr_mask, scope eth, type rw */ -#define reg_eth_rw_intr_mask___crc___lsb 0 -#define reg_eth_rw_intr_mask___crc___width 1 -#define reg_eth_rw_intr_mask___crc___bit 0 -#define reg_eth_rw_intr_mask___align___lsb 1 -#define reg_eth_rw_intr_mask___align___width 1 -#define reg_eth_rw_intr_mask___align___bit 1 -#define reg_eth_rw_intr_mask___oversize___lsb 2 -#define reg_eth_rw_intr_mask___oversize___width 1 -#define reg_eth_rw_intr_mask___oversize___bit 2 -#define reg_eth_rw_intr_mask___congestion___lsb 3 -#define reg_eth_rw_intr_mask___congestion___width 1 -#define reg_eth_rw_intr_mask___congestion___bit 3 -#define reg_eth_rw_intr_mask___single_col___lsb 4 -#define reg_eth_rw_intr_mask___single_col___width 1 -#define reg_eth_rw_intr_mask___single_col___bit 4 -#define reg_eth_rw_intr_mask___mult_col___lsb 5 -#define reg_eth_rw_intr_mask___mult_col___width 1 -#define reg_eth_rw_intr_mask___mult_col___bit 5 -#define reg_eth_rw_intr_mask___late_col___lsb 6 -#define reg_eth_rw_intr_mask___late_col___width 1 -#define reg_eth_rw_intr_mask___late_col___bit 6 -#define reg_eth_rw_intr_mask___deferred___lsb 7 -#define reg_eth_rw_intr_mask___deferred___width 1 -#define reg_eth_rw_intr_mask___deferred___bit 7 -#define reg_eth_rw_intr_mask___carrier_loss___lsb 8 -#define reg_eth_rw_intr_mask___carrier_loss___width 1 -#define reg_eth_rw_intr_mask___carrier_loss___bit 8 -#define reg_eth_rw_intr_mask___sqe_test_err___lsb 9 -#define reg_eth_rw_intr_mask___sqe_test_err___width 1 -#define reg_eth_rw_intr_mask___sqe_test_err___bit 9 -#define reg_eth_rw_intr_mask___orun___lsb 10 -#define reg_eth_rw_intr_mask___orun___width 1 -#define reg_eth_rw_intr_mask___orun___bit 10 -#define reg_eth_rw_intr_mask___urun___lsb 11 -#define reg_eth_rw_intr_mask___urun___width 1 -#define reg_eth_rw_intr_mask___urun___bit 11 -#define reg_eth_rw_intr_mask___excessive_col___lsb 12 -#define reg_eth_rw_intr_mask___excessive_col___width 1 -#define reg_eth_rw_intr_mask___excessive_col___bit 12 -#define reg_eth_rw_intr_mask___mdio___lsb 13 -#define reg_eth_rw_intr_mask___mdio___width 1 -#define reg_eth_rw_intr_mask___mdio___bit 13 -#define reg_eth_rw_intr_mask_offset 76 - -/* Register rw_ack_intr, scope eth, type rw */ -#define reg_eth_rw_ack_intr___crc___lsb 0 -#define reg_eth_rw_ack_intr___crc___width 1 -#define reg_eth_rw_ack_intr___crc___bit 0 -#define reg_eth_rw_ack_intr___align___lsb 1 -#define reg_eth_rw_ack_intr___align___width 1 -#define reg_eth_rw_ack_intr___align___bit 1 -#define reg_eth_rw_ack_intr___oversize___lsb 2 -#define reg_eth_rw_ack_intr___oversize___width 1 -#define reg_eth_rw_ack_intr___oversize___bit 2 -#define reg_eth_rw_ack_intr___congestion___lsb 3 -#define reg_eth_rw_ack_intr___congestion___width 1 -#define reg_eth_rw_ack_intr___congestion___bit 3 -#define reg_eth_rw_ack_intr___single_col___lsb 4 -#define reg_eth_rw_ack_intr___single_col___width 1 -#define reg_eth_rw_ack_intr___single_col___bit 4 -#define reg_eth_rw_ack_intr___mult_col___lsb 5 -#define reg_eth_rw_ack_intr___mult_col___width 1 -#define reg_eth_rw_ack_intr___mult_col___bit 5 -#define reg_eth_rw_ack_intr___late_col___lsb 6 -#define reg_eth_rw_ack_intr___late_col___width 1 -#define reg_eth_rw_ack_intr___late_col___bit 6 -#define reg_eth_rw_ack_intr___deferred___lsb 7 -#define reg_eth_rw_ack_intr___deferred___width 1 -#define reg_eth_rw_ack_intr___deferred___bit 7 -#define reg_eth_rw_ack_intr___carrier_loss___lsb 8 -#define reg_eth_rw_ack_intr___carrier_loss___width 1 -#define reg_eth_rw_ack_intr___carrier_loss___bit 8 -#define reg_eth_rw_ack_intr___sqe_test_err___lsb 9 -#define reg_eth_rw_ack_intr___sqe_test_err___width 1 -#define reg_eth_rw_ack_intr___sqe_test_err___bit 9 -#define reg_eth_rw_ack_intr___orun___lsb 10 -#define reg_eth_rw_ack_intr___orun___width 1 -#define reg_eth_rw_ack_intr___orun___bit 10 -#define reg_eth_rw_ack_intr___urun___lsb 11 -#define reg_eth_rw_ack_intr___urun___width 1 -#define reg_eth_rw_ack_intr___urun___bit 11 -#define reg_eth_rw_ack_intr___excessive_col___lsb 12 -#define reg_eth_rw_ack_intr___excessive_col___width 1 -#define reg_eth_rw_ack_intr___excessive_col___bit 12 -#define reg_eth_rw_ack_intr___mdio___lsb 13 -#define reg_eth_rw_ack_intr___mdio___width 1 -#define reg_eth_rw_ack_intr___mdio___bit 13 -#define reg_eth_rw_ack_intr_offset 80 - -/* Register r_intr, scope eth, type r */ -#define reg_eth_r_intr___crc___lsb 0 -#define reg_eth_r_intr___crc___width 1 -#define reg_eth_r_intr___crc___bit 0 -#define reg_eth_r_intr___align___lsb 1 -#define reg_eth_r_intr___align___width 1 -#define reg_eth_r_intr___align___bit 1 -#define reg_eth_r_intr___oversize___lsb 2 -#define reg_eth_r_intr___oversize___width 1 -#define reg_eth_r_intr___oversize___bit 2 -#define reg_eth_r_intr___congestion___lsb 3 -#define reg_eth_r_intr___congestion___width 1 -#define reg_eth_r_intr___congestion___bit 3 -#define reg_eth_r_intr___single_col___lsb 4 -#define reg_eth_r_intr___single_col___width 1 -#define reg_eth_r_intr___single_col___bit 4 -#define reg_eth_r_intr___mult_col___lsb 5 -#define reg_eth_r_intr___mult_col___width 1 -#define reg_eth_r_intr___mult_col___bit 5 -#define reg_eth_r_intr___late_col___lsb 6 -#define reg_eth_r_intr___late_col___width 1 -#define reg_eth_r_intr___late_col___bit 6 -#define reg_eth_r_intr___deferred___lsb 7 -#define reg_eth_r_intr___deferred___width 1 -#define reg_eth_r_intr___deferred___bit 7 -#define reg_eth_r_intr___carrier_loss___lsb 8 -#define reg_eth_r_intr___carrier_loss___width 1 -#define reg_eth_r_intr___carrier_loss___bit 8 -#define reg_eth_r_intr___sqe_test_err___lsb 9 -#define reg_eth_r_intr___sqe_test_err___width 1 -#define reg_eth_r_intr___sqe_test_err___bit 9 -#define reg_eth_r_intr___orun___lsb 10 -#define reg_eth_r_intr___orun___width 1 -#define reg_eth_r_intr___orun___bit 10 -#define reg_eth_r_intr___urun___lsb 11 -#define reg_eth_r_intr___urun___width 1 -#define reg_eth_r_intr___urun___bit 11 -#define reg_eth_r_intr___excessive_col___lsb 12 -#define reg_eth_r_intr___excessive_col___width 1 -#define reg_eth_r_intr___excessive_col___bit 12 -#define reg_eth_r_intr___mdio___lsb 13 -#define reg_eth_r_intr___mdio___width 1 -#define reg_eth_r_intr___mdio___bit 13 -#define reg_eth_r_intr_offset 84 - -/* Register r_masked_intr, scope eth, type r */ -#define reg_eth_r_masked_intr___crc___lsb 0 -#define reg_eth_r_masked_intr___crc___width 1 -#define reg_eth_r_masked_intr___crc___bit 0 -#define reg_eth_r_masked_intr___align___lsb 1 -#define reg_eth_r_masked_intr___align___width 1 -#define reg_eth_r_masked_intr___align___bit 1 -#define reg_eth_r_masked_intr___oversize___lsb 2 -#define reg_eth_r_masked_intr___oversize___width 1 -#define reg_eth_r_masked_intr___oversize___bit 2 -#define reg_eth_r_masked_intr___congestion___lsb 3 -#define reg_eth_r_masked_intr___congestion___width 1 -#define reg_eth_r_masked_intr___congestion___bit 3 -#define reg_eth_r_masked_intr___single_col___lsb 4 -#define reg_eth_r_masked_intr___single_col___width 1 -#define reg_eth_r_masked_intr___single_col___bit 4 -#define reg_eth_r_masked_intr___mult_col___lsb 5 -#define reg_eth_r_masked_intr___mult_col___width 1 -#define reg_eth_r_masked_intr___mult_col___bit 5 -#define reg_eth_r_masked_intr___late_col___lsb 6 -#define reg_eth_r_masked_intr___late_col___width 1 -#define reg_eth_r_masked_intr___late_col___bit 6 -#define reg_eth_r_masked_intr___deferred___lsb 7 -#define reg_eth_r_masked_intr___deferred___width 1 -#define reg_eth_r_masked_intr___deferred___bit 7 -#define reg_eth_r_masked_intr___carrier_loss___lsb 8 -#define reg_eth_r_masked_intr___carrier_loss___width 1 -#define reg_eth_r_masked_intr___carrier_loss___bit 8 -#define reg_eth_r_masked_intr___sqe_test_err___lsb 9 -#define reg_eth_r_masked_intr___sqe_test_err___width 1 -#define reg_eth_r_masked_intr___sqe_test_err___bit 9 -#define reg_eth_r_masked_intr___orun___lsb 10 -#define reg_eth_r_masked_intr___orun___width 1 -#define reg_eth_r_masked_intr___orun___bit 10 -#define reg_eth_r_masked_intr___urun___lsb 11 -#define reg_eth_r_masked_intr___urun___width 1 -#define reg_eth_r_masked_intr___urun___bit 11 -#define reg_eth_r_masked_intr___excessive_col___lsb 12 -#define reg_eth_r_masked_intr___excessive_col___width 1 -#define reg_eth_r_masked_intr___excessive_col___bit 12 -#define reg_eth_r_masked_intr___mdio___lsb 13 -#define reg_eth_r_masked_intr___mdio___width 1 -#define reg_eth_r_masked_intr___mdio___bit 13 -#define reg_eth_r_masked_intr_offset 88 - - -/* Constants */ -#define regk_eth_discard 0x00000000 -#define regk_eth_ether 0x00000000 -#define regk_eth_full 0x00000001 -#define regk_eth_half 0x00000000 -#define regk_eth_hsh 0x00000001 -#define regk_eth_mii 0x00000001 -#define regk_eth_mii_clk 0x00000000 -#define regk_eth_mii_rec 0x00000002 -#define regk_eth_no 0x00000000 -#define regk_eth_rec 0x00000001 -#define regk_eth_rw_ga_hi_default 0x00000000 -#define regk_eth_rw_ga_lo_default 0x00000000 -#define regk_eth_rw_gen_ctrl_default 0x00000000 -#define regk_eth_rw_intr_mask_default 0x00000000 -#define regk_eth_rw_ma0_hi_default 0x00000000 -#define regk_eth_rw_ma0_lo_default 0x00000000 -#define regk_eth_rw_ma1_hi_default 0x00000000 -#define regk_eth_rw_ma1_lo_default 0x00000000 -#define regk_eth_rw_mgm_ctrl_default 0x00000000 -#define regk_eth_rw_test_ctrl_default 0x00000000 -#define regk_eth_size1518 0x00000000 -#define regk_eth_size1522 0x00000001 -#define regk_eth_yes 0x00000001 -#endif /* __eth_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h deleted file mode 100644 index 35356bc08629..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h +++ /dev/null @@ -1,276 +0,0 @@ -#ifndef __gio_defs_asm_h -#define __gio_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/gio/rtl/gio_regs.r - * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp - * last modfied: Mon Apr 11 16:07:47 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/gio_defs_asm.h ../../inst/gio/rtl/gio_regs.r - * id: $Id: gio_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_pa_dout, scope gio, type rw */ -#define reg_gio_rw_pa_dout___data___lsb 0 -#define reg_gio_rw_pa_dout___data___width 8 -#define reg_gio_rw_pa_dout_offset 0 - -/* Register r_pa_din, scope gio, type r */ -#define reg_gio_r_pa_din___data___lsb 0 -#define reg_gio_r_pa_din___data___width 8 -#define reg_gio_r_pa_din_offset 4 - -/* Register rw_pa_oe, scope gio, type rw */ -#define reg_gio_rw_pa_oe___oe___lsb 0 -#define reg_gio_rw_pa_oe___oe___width 8 -#define reg_gio_rw_pa_oe_offset 8 - -/* Register rw_intr_cfg, scope gio, type rw */ -#define reg_gio_rw_intr_cfg___pa0___lsb 0 -#define reg_gio_rw_intr_cfg___pa0___width 3 -#define reg_gio_rw_intr_cfg___pa1___lsb 3 -#define reg_gio_rw_intr_cfg___pa1___width 3 -#define reg_gio_rw_intr_cfg___pa2___lsb 6 -#define reg_gio_rw_intr_cfg___pa2___width 3 -#define reg_gio_rw_intr_cfg___pa3___lsb 9 -#define reg_gio_rw_intr_cfg___pa3___width 3 -#define reg_gio_rw_intr_cfg___pa4___lsb 12 -#define reg_gio_rw_intr_cfg___pa4___width 3 -#define reg_gio_rw_intr_cfg___pa5___lsb 15 -#define reg_gio_rw_intr_cfg___pa5___width 3 -#define reg_gio_rw_intr_cfg___pa6___lsb 18 -#define reg_gio_rw_intr_cfg___pa6___width 3 -#define reg_gio_rw_intr_cfg___pa7___lsb 21 -#define reg_gio_rw_intr_cfg___pa7___width 3 -#define reg_gio_rw_intr_cfg_offset 12 - -/* Register rw_intr_mask, scope gio, type rw */ -#define reg_gio_rw_intr_mask___pa0___lsb 0 -#define reg_gio_rw_intr_mask___pa0___width 1 -#define reg_gio_rw_intr_mask___pa0___bit 0 -#define reg_gio_rw_intr_mask___pa1___lsb 1 -#define reg_gio_rw_intr_mask___pa1___width 1 -#define reg_gio_rw_intr_mask___pa1___bit 1 -#define reg_gio_rw_intr_mask___pa2___lsb 2 -#define reg_gio_rw_intr_mask___pa2___width 1 -#define reg_gio_rw_intr_mask___pa2___bit 2 -#define reg_gio_rw_intr_mask___pa3___lsb 3 -#define reg_gio_rw_intr_mask___pa3___width 1 -#define reg_gio_rw_intr_mask___pa3___bit 3 -#define reg_gio_rw_intr_mask___pa4___lsb 4 -#define reg_gio_rw_intr_mask___pa4___width 1 -#define reg_gio_rw_intr_mask___pa4___bit 4 -#define reg_gio_rw_intr_mask___pa5___lsb 5 -#define reg_gio_rw_intr_mask___pa5___width 1 -#define reg_gio_rw_intr_mask___pa5___bit 5 -#define reg_gio_rw_intr_mask___pa6___lsb 6 -#define reg_gio_rw_intr_mask___pa6___width 1 -#define reg_gio_rw_intr_mask___pa6___bit 6 -#define reg_gio_rw_intr_mask___pa7___lsb 7 -#define reg_gio_rw_intr_mask___pa7___width 1 -#define reg_gio_rw_intr_mask___pa7___bit 7 -#define reg_gio_rw_intr_mask_offset 16 - -/* Register rw_ack_intr, scope gio, type rw */ -#define reg_gio_rw_ack_intr___pa0___lsb 0 -#define reg_gio_rw_ack_intr___pa0___width 1 -#define reg_gio_rw_ack_intr___pa0___bit 0 -#define reg_gio_rw_ack_intr___pa1___lsb 1 -#define reg_gio_rw_ack_intr___pa1___width 1 -#define reg_gio_rw_ack_intr___pa1___bit 1 -#define reg_gio_rw_ack_intr___pa2___lsb 2 -#define reg_gio_rw_ack_intr___pa2___width 1 -#define reg_gio_rw_ack_intr___pa2___bit 2 -#define reg_gio_rw_ack_intr___pa3___lsb 3 -#define reg_gio_rw_ack_intr___pa3___width 1 -#define reg_gio_rw_ack_intr___pa3___bit 3 -#define reg_gio_rw_ack_intr___pa4___lsb 4 -#define reg_gio_rw_ack_intr___pa4___width 1 -#define reg_gio_rw_ack_intr___pa4___bit 4 -#define reg_gio_rw_ack_intr___pa5___lsb 5 -#define reg_gio_rw_ack_intr___pa5___width 1 -#define reg_gio_rw_ack_intr___pa5___bit 5 -#define reg_gio_rw_ack_intr___pa6___lsb 6 -#define reg_gio_rw_ack_intr___pa6___width 1 -#define reg_gio_rw_ack_intr___pa6___bit 6 -#define reg_gio_rw_ack_intr___pa7___lsb 7 -#define reg_gio_rw_ack_intr___pa7___width 1 -#define reg_gio_rw_ack_intr___pa7___bit 7 -#define reg_gio_rw_ack_intr_offset 20 - -/* Register r_intr, scope gio, type r */ -#define reg_gio_r_intr___pa0___lsb 0 -#define reg_gio_r_intr___pa0___width 1 -#define reg_gio_r_intr___pa0___bit 0 -#define reg_gio_r_intr___pa1___lsb 1 -#define reg_gio_r_intr___pa1___width 1 -#define reg_gio_r_intr___pa1___bit 1 -#define reg_gio_r_intr___pa2___lsb 2 -#define reg_gio_r_intr___pa2___width 1 -#define reg_gio_r_intr___pa2___bit 2 -#define reg_gio_r_intr___pa3___lsb 3 -#define reg_gio_r_intr___pa3___width 1 -#define reg_gio_r_intr___pa3___bit 3 -#define reg_gio_r_intr___pa4___lsb 4 -#define reg_gio_r_intr___pa4___width 1 -#define reg_gio_r_intr___pa4___bit 4 -#define reg_gio_r_intr___pa5___lsb 5 -#define reg_gio_r_intr___pa5___width 1 -#define reg_gio_r_intr___pa5___bit 5 -#define reg_gio_r_intr___pa6___lsb 6 -#define reg_gio_r_intr___pa6___width 1 -#define reg_gio_r_intr___pa6___bit 6 -#define reg_gio_r_intr___pa7___lsb 7 -#define reg_gio_r_intr___pa7___width 1 -#define reg_gio_r_intr___pa7___bit 7 -#define reg_gio_r_intr_offset 24 - -/* Register r_masked_intr, scope gio, type r */ -#define reg_gio_r_masked_intr___pa0___lsb 0 -#define reg_gio_r_masked_intr___pa0___width 1 -#define reg_gio_r_masked_intr___pa0___bit 0 -#define reg_gio_r_masked_intr___pa1___lsb 1 -#define reg_gio_r_masked_intr___pa1___width 1 -#define reg_gio_r_masked_intr___pa1___bit 1 -#define reg_gio_r_masked_intr___pa2___lsb 2 -#define reg_gio_r_masked_intr___pa2___width 1 -#define reg_gio_r_masked_intr___pa2___bit 2 -#define reg_gio_r_masked_intr___pa3___lsb 3 -#define reg_gio_r_masked_intr___pa3___width 1 -#define reg_gio_r_masked_intr___pa3___bit 3 -#define reg_gio_r_masked_intr___pa4___lsb 4 -#define reg_gio_r_masked_intr___pa4___width 1 -#define reg_gio_r_masked_intr___pa4___bit 4 -#define reg_gio_r_masked_intr___pa5___lsb 5 -#define reg_gio_r_masked_intr___pa5___width 1 -#define reg_gio_r_masked_intr___pa5___bit 5 -#define reg_gio_r_masked_intr___pa6___lsb 6 -#define reg_gio_r_masked_intr___pa6___width 1 -#define reg_gio_r_masked_intr___pa6___bit 6 -#define reg_gio_r_masked_intr___pa7___lsb 7 -#define reg_gio_r_masked_intr___pa7___width 1 -#define reg_gio_r_masked_intr___pa7___bit 7 -#define reg_gio_r_masked_intr_offset 28 - -/* Register rw_pb_dout, scope gio, type rw */ -#define reg_gio_rw_pb_dout___data___lsb 0 -#define reg_gio_rw_pb_dout___data___width 18 -#define reg_gio_rw_pb_dout_offset 32 - -/* Register r_pb_din, scope gio, type r */ -#define reg_gio_r_pb_din___data___lsb 0 -#define reg_gio_r_pb_din___data___width 18 -#define reg_gio_r_pb_din_offset 36 - -/* Register rw_pb_oe, scope gio, type rw */ -#define reg_gio_rw_pb_oe___oe___lsb 0 -#define reg_gio_rw_pb_oe___oe___width 18 -#define reg_gio_rw_pb_oe_offset 40 - -/* Register rw_pc_dout, scope gio, type rw */ -#define reg_gio_rw_pc_dout___data___lsb 0 -#define reg_gio_rw_pc_dout___data___width 18 -#define reg_gio_rw_pc_dout_offset 48 - -/* Register r_pc_din, scope gio, type r */ -#define reg_gio_r_pc_din___data___lsb 0 -#define reg_gio_r_pc_din___data___width 18 -#define reg_gio_r_pc_din_offset 52 - -/* Register rw_pc_oe, scope gio, type rw */ -#define reg_gio_rw_pc_oe___oe___lsb 0 -#define reg_gio_rw_pc_oe___oe___width 18 -#define reg_gio_rw_pc_oe_offset 56 - -/* Register rw_pd_dout, scope gio, type rw */ -#define reg_gio_rw_pd_dout___data___lsb 0 -#define reg_gio_rw_pd_dout___data___width 18 -#define reg_gio_rw_pd_dout_offset 64 - -/* Register r_pd_din, scope gio, type r */ -#define reg_gio_r_pd_din___data___lsb 0 -#define reg_gio_r_pd_din___data___width 18 -#define reg_gio_r_pd_din_offset 68 - -/* Register rw_pd_oe, scope gio, type rw */ -#define reg_gio_rw_pd_oe___oe___lsb 0 -#define reg_gio_rw_pd_oe___oe___width 18 -#define reg_gio_rw_pd_oe_offset 72 - -/* Register rw_pe_dout, scope gio, type rw */ -#define reg_gio_rw_pe_dout___data___lsb 0 -#define reg_gio_rw_pe_dout___data___width 18 -#define reg_gio_rw_pe_dout_offset 80 - -/* Register r_pe_din, scope gio, type r */ -#define reg_gio_r_pe_din___data___lsb 0 -#define reg_gio_r_pe_din___data___width 18 -#define reg_gio_r_pe_din_offset 84 - -/* Register rw_pe_oe, scope gio, type rw */ -#define reg_gio_rw_pe_oe___oe___lsb 0 -#define reg_gio_rw_pe_oe___oe___width 18 -#define reg_gio_rw_pe_oe_offset 88 - - -/* Constants */ -#define regk_gio_anyedge 0x00000007 -#define regk_gio_hi 0x00000001 -#define regk_gio_lo 0x00000002 -#define regk_gio_negedge 0x00000006 -#define regk_gio_no 0x00000000 -#define regk_gio_off 0x00000000 -#define regk_gio_posedge 0x00000005 -#define regk_gio_rw_intr_cfg_default 0x00000000 -#define regk_gio_rw_intr_mask_default 0x00000000 -#define regk_gio_rw_pa_oe_default 0x00000000 -#define regk_gio_rw_pb_oe_default 0x00000000 -#define regk_gio_rw_pc_oe_default 0x00000000 -#define regk_gio_rw_pd_oe_default 0x00000000 -#define regk_gio_rw_pe_oe_default 0x00000000 -#define regk_gio_set 0x00000003 -#define regk_gio_yes 0x00000001 -#endif /* __gio_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h b/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h deleted file mode 100644 index c8315905c571..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h +++ /dev/null @@ -1,38 +0,0 @@ -/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version - from ../../inst/intr_vect/rtl/guinness/ivmask.config.r -version . */ - -#ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R -#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R -#define MEMARB_INTR_VECT 0x31 -#define GEN_IO_INTR_VECT 0x32 -#define IOP0_INTR_VECT 0x33 -#define IOP1_INTR_VECT 0x34 -#define IOP2_INTR_VECT 0x35 -#define IOP3_INTR_VECT 0x36 -#define DMA0_INTR_VECT 0x37 -#define DMA1_INTR_VECT 0x38 -#define DMA2_INTR_VECT 0x39 -#define DMA3_INTR_VECT 0x3a -#define DMA4_INTR_VECT 0x3b -#define DMA5_INTR_VECT 0x3c -#define DMA6_INTR_VECT 0x3d -#define DMA7_INTR_VECT 0x3e -#define DMA8_INTR_VECT 0x3f -#define DMA9_INTR_VECT 0x40 -#define ATA_INTR_VECT 0x41 -#define SSER0_INTR_VECT 0x42 -#define SSER1_INTR_VECT 0x43 -#define SER0_INTR_VECT 0x44 -#define SER1_INTR_VECT 0x45 -#define SER2_INTR_VECT 0x46 -#define SER3_INTR_VECT 0x47 -#define P21_INTR_VECT 0x48 -#define ETH0_INTR_VECT 0x49 -#define ETH1_INTR_VECT 0x4a -#define TIMER_INTR_VECT 0x4b -#define BIF_ARB_INTR_VECT 0x4c -#define BIF_DMA_INTR_VECT 0x4d -#define EXT_INTR_VECT 0x4e - -#endif diff --git a/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h deleted file mode 100644 index 6df2a433b02d..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h +++ /dev/null @@ -1,355 +0,0 @@ -#ifndef __intr_vect_defs_asm_h -#define __intr_vect_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/intr_vect/rtl/guinness/ivmask.config.r - * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp - * last modfied: Mon Apr 11 16:08:03 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/intr_vect_defs_asm.h ../../inst/intr_vect/rtl/guinness/ivmask.config.r - * id: $Id: intr_vect_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_mask, scope intr_vect, type rw */ -#define reg_intr_vect_rw_mask___memarb___lsb 0 -#define reg_intr_vect_rw_mask___memarb___width 1 -#define reg_intr_vect_rw_mask___memarb___bit 0 -#define reg_intr_vect_rw_mask___gen_io___lsb 1 -#define reg_intr_vect_rw_mask___gen_io___width 1 -#define reg_intr_vect_rw_mask___gen_io___bit 1 -#define reg_intr_vect_rw_mask___iop0___lsb 2 -#define reg_intr_vect_rw_mask___iop0___width 1 -#define reg_intr_vect_rw_mask___iop0___bit 2 -#define reg_intr_vect_rw_mask___iop1___lsb 3 -#define reg_intr_vect_rw_mask___iop1___width 1 -#define reg_intr_vect_rw_mask___iop1___bit 3 -#define reg_intr_vect_rw_mask___iop2___lsb 4 -#define reg_intr_vect_rw_mask___iop2___width 1 -#define reg_intr_vect_rw_mask___iop2___bit 4 -#define reg_intr_vect_rw_mask___iop3___lsb 5 -#define reg_intr_vect_rw_mask___iop3___width 1 -#define reg_intr_vect_rw_mask___iop3___bit 5 -#define reg_intr_vect_rw_mask___dma0___lsb 6 -#define reg_intr_vect_rw_mask___dma0___width 1 -#define reg_intr_vect_rw_mask___dma0___bit 6 -#define reg_intr_vect_rw_mask___dma1___lsb 7 -#define reg_intr_vect_rw_mask___dma1___width 1 -#define reg_intr_vect_rw_mask___dma1___bit 7 -#define reg_intr_vect_rw_mask___dma2___lsb 8 -#define reg_intr_vect_rw_mask___dma2___width 1 -#define reg_intr_vect_rw_mask___dma2___bit 8 -#define reg_intr_vect_rw_mask___dma3___lsb 9 -#define reg_intr_vect_rw_mask___dma3___width 1 -#define reg_intr_vect_rw_mask___dma3___bit 9 -#define reg_intr_vect_rw_mask___dma4___lsb 10 -#define reg_intr_vect_rw_mask___dma4___width 1 -#define reg_intr_vect_rw_mask___dma4___bit 10 -#define reg_intr_vect_rw_mask___dma5___lsb 11 -#define reg_intr_vect_rw_mask___dma5___width 1 -#define reg_intr_vect_rw_mask___dma5___bit 11 -#define reg_intr_vect_rw_mask___dma6___lsb 12 -#define reg_intr_vect_rw_mask___dma6___width 1 -#define reg_intr_vect_rw_mask___dma6___bit 12 -#define reg_intr_vect_rw_mask___dma7___lsb 13 -#define reg_intr_vect_rw_mask___dma7___width 1 -#define reg_intr_vect_rw_mask___dma7___bit 13 -#define reg_intr_vect_rw_mask___dma8___lsb 14 -#define reg_intr_vect_rw_mask___dma8___width 1 -#define reg_intr_vect_rw_mask___dma8___bit 14 -#define reg_intr_vect_rw_mask___dma9___lsb 15 -#define reg_intr_vect_rw_mask___dma9___width 1 -#define reg_intr_vect_rw_mask___dma9___bit 15 -#define reg_intr_vect_rw_mask___ata___lsb 16 -#define reg_intr_vect_rw_mask___ata___width 1 -#define reg_intr_vect_rw_mask___ata___bit 16 -#define reg_intr_vect_rw_mask___sser0___lsb 17 -#define reg_intr_vect_rw_mask___sser0___width 1 -#define reg_intr_vect_rw_mask___sser0___bit 17 -#define reg_intr_vect_rw_mask___sser1___lsb 18 -#define reg_intr_vect_rw_mask___sser1___width 1 -#define reg_intr_vect_rw_mask___sser1___bit 18 -#define reg_intr_vect_rw_mask___ser0___lsb 19 -#define reg_intr_vect_rw_mask___ser0___width 1 -#define reg_intr_vect_rw_mask___ser0___bit 19 -#define reg_intr_vect_rw_mask___ser1___lsb 20 -#define reg_intr_vect_rw_mask___ser1___width 1 -#define reg_intr_vect_rw_mask___ser1___bit 20 -#define reg_intr_vect_rw_mask___ser2___lsb 21 -#define reg_intr_vect_rw_mask___ser2___width 1 -#define reg_intr_vect_rw_mask___ser2___bit 21 -#define reg_intr_vect_rw_mask___ser3___lsb 22 -#define reg_intr_vect_rw_mask___ser3___width 1 -#define reg_intr_vect_rw_mask___ser3___bit 22 -#define reg_intr_vect_rw_mask___p21___lsb 23 -#define reg_intr_vect_rw_mask___p21___width 1 -#define reg_intr_vect_rw_mask___p21___bit 23 -#define reg_intr_vect_rw_mask___eth0___lsb 24 -#define reg_intr_vect_rw_mask___eth0___width 1 -#define reg_intr_vect_rw_mask___eth0___bit 24 -#define reg_intr_vect_rw_mask___eth1___lsb 25 -#define reg_intr_vect_rw_mask___eth1___width 1 -#define reg_intr_vect_rw_mask___eth1___bit 25 -#define reg_intr_vect_rw_mask___timer___lsb 26 -#define reg_intr_vect_rw_mask___timer___width 1 -#define reg_intr_vect_rw_mask___timer___bit 26 -#define reg_intr_vect_rw_mask___bif_arb___lsb 27 -#define reg_intr_vect_rw_mask___bif_arb___width 1 -#define reg_intr_vect_rw_mask___bif_arb___bit 27 -#define reg_intr_vect_rw_mask___bif_dma___lsb 28 -#define reg_intr_vect_rw_mask___bif_dma___width 1 -#define reg_intr_vect_rw_mask___bif_dma___bit 28 -#define reg_intr_vect_rw_mask___ext___lsb 29 -#define reg_intr_vect_rw_mask___ext___width 1 -#define reg_intr_vect_rw_mask___ext___bit 29 -#define reg_intr_vect_rw_mask_offset 0 - -/* Register r_vect, scope intr_vect, type r */ -#define reg_intr_vect_r_vect___memarb___lsb 0 -#define reg_intr_vect_r_vect___memarb___width 1 -#define reg_intr_vect_r_vect___memarb___bit 0 -#define reg_intr_vect_r_vect___gen_io___lsb 1 -#define reg_intr_vect_r_vect___gen_io___width 1 -#define reg_intr_vect_r_vect___gen_io___bit 1 -#define reg_intr_vect_r_vect___iop0___lsb 2 -#define reg_intr_vect_r_vect___iop0___width 1 -#define reg_intr_vect_r_vect___iop0___bit 2 -#define reg_intr_vect_r_vect___iop1___lsb 3 -#define reg_intr_vect_r_vect___iop1___width 1 -#define reg_intr_vect_r_vect___iop1___bit 3 -#define reg_intr_vect_r_vect___iop2___lsb 4 -#define reg_intr_vect_r_vect___iop2___width 1 -#define reg_intr_vect_r_vect___iop2___bit 4 -#define reg_intr_vect_r_vect___iop3___lsb 5 -#define reg_intr_vect_r_vect___iop3___width 1 -#define reg_intr_vect_r_vect___iop3___bit 5 -#define reg_intr_vect_r_vect___dma0___lsb 6 -#define reg_intr_vect_r_vect___dma0___width 1 -#define reg_intr_vect_r_vect___dma0___bit 6 -#define reg_intr_vect_r_vect___dma1___lsb 7 -#define reg_intr_vect_r_vect___dma1___width 1 -#define reg_intr_vect_r_vect___dma1___bit 7 -#define reg_intr_vect_r_vect___dma2___lsb 8 -#define reg_intr_vect_r_vect___dma2___width 1 -#define reg_intr_vect_r_vect___dma2___bit 8 -#define reg_intr_vect_r_vect___dma3___lsb 9 -#define reg_intr_vect_r_vect___dma3___width 1 -#define reg_intr_vect_r_vect___dma3___bit 9 -#define reg_intr_vect_r_vect___dma4___lsb 10 -#define reg_intr_vect_r_vect___dma4___width 1 -#define reg_intr_vect_r_vect___dma4___bit 10 -#define reg_intr_vect_r_vect___dma5___lsb 11 -#define reg_intr_vect_r_vect___dma5___width 1 -#define reg_intr_vect_r_vect___dma5___bit 11 -#define reg_intr_vect_r_vect___dma6___lsb 12 -#define reg_intr_vect_r_vect___dma6___width 1 -#define reg_intr_vect_r_vect___dma6___bit 12 -#define reg_intr_vect_r_vect___dma7___lsb 13 -#define reg_intr_vect_r_vect___dma7___width 1 -#define reg_intr_vect_r_vect___dma7___bit 13 -#define reg_intr_vect_r_vect___dma8___lsb 14 -#define reg_intr_vect_r_vect___dma8___width 1 -#define reg_intr_vect_r_vect___dma8___bit 14 -#define reg_intr_vect_r_vect___dma9___lsb 15 -#define reg_intr_vect_r_vect___dma9___width 1 -#define reg_intr_vect_r_vect___dma9___bit 15 -#define reg_intr_vect_r_vect___ata___lsb 16 -#define reg_intr_vect_r_vect___ata___width 1 -#define reg_intr_vect_r_vect___ata___bit 16 -#define reg_intr_vect_r_vect___sser0___lsb 17 -#define reg_intr_vect_r_vect___sser0___width 1 -#define reg_intr_vect_r_vect___sser0___bit 17 -#define reg_intr_vect_r_vect___sser1___lsb 18 -#define reg_intr_vect_r_vect___sser1___width 1 -#define reg_intr_vect_r_vect___sser1___bit 18 -#define reg_intr_vect_r_vect___ser0___lsb 19 -#define reg_intr_vect_r_vect___ser0___width 1 -#define reg_intr_vect_r_vect___ser0___bit 19 -#define reg_intr_vect_r_vect___ser1___lsb 20 -#define reg_intr_vect_r_vect___ser1___width 1 -#define reg_intr_vect_r_vect___ser1___bit 20 -#define reg_intr_vect_r_vect___ser2___lsb 21 -#define reg_intr_vect_r_vect___ser2___width 1 -#define reg_intr_vect_r_vect___ser2___bit 21 -#define reg_intr_vect_r_vect___ser3___lsb 22 -#define reg_intr_vect_r_vect___ser3___width 1 -#define reg_intr_vect_r_vect___ser3___bit 22 -#define reg_intr_vect_r_vect___p21___lsb 23 -#define reg_intr_vect_r_vect___p21___width 1 -#define reg_intr_vect_r_vect___p21___bit 23 -#define reg_intr_vect_r_vect___eth0___lsb 24 -#define reg_intr_vect_r_vect___eth0___width 1 -#define reg_intr_vect_r_vect___eth0___bit 24 -#define reg_intr_vect_r_vect___eth1___lsb 25 -#define reg_intr_vect_r_vect___eth1___width 1 -#define reg_intr_vect_r_vect___eth1___bit 25 -#define reg_intr_vect_r_vect___timer___lsb 26 -#define reg_intr_vect_r_vect___timer___width 1 -#define reg_intr_vect_r_vect___timer___bit 26 -#define reg_intr_vect_r_vect___bif_arb___lsb 27 -#define reg_intr_vect_r_vect___bif_arb___width 1 -#define reg_intr_vect_r_vect___bif_arb___bit 27 -#define reg_intr_vect_r_vect___bif_dma___lsb 28 -#define reg_intr_vect_r_vect___bif_dma___width 1 -#define reg_intr_vect_r_vect___bif_dma___bit 28 -#define reg_intr_vect_r_vect___ext___lsb 29 -#define reg_intr_vect_r_vect___ext___width 1 -#define reg_intr_vect_r_vect___ext___bit 29 -#define reg_intr_vect_r_vect_offset 4 - -/* Register r_masked_vect, scope intr_vect, type r */ -#define reg_intr_vect_r_masked_vect___memarb___lsb 0 -#define reg_intr_vect_r_masked_vect___memarb___width 1 -#define reg_intr_vect_r_masked_vect___memarb___bit 0 -#define reg_intr_vect_r_masked_vect___gen_io___lsb 1 -#define reg_intr_vect_r_masked_vect___gen_io___width 1 -#define reg_intr_vect_r_masked_vect___gen_io___bit 1 -#define reg_intr_vect_r_masked_vect___iop0___lsb 2 -#define reg_intr_vect_r_masked_vect___iop0___width 1 -#define reg_intr_vect_r_masked_vect___iop0___bit 2 -#define reg_intr_vect_r_masked_vect___iop1___lsb 3 -#define reg_intr_vect_r_masked_vect___iop1___width 1 -#define reg_intr_vect_r_masked_vect___iop1___bit 3 -#define reg_intr_vect_r_masked_vect___iop2___lsb 4 -#define reg_intr_vect_r_masked_vect___iop2___width 1 -#define reg_intr_vect_r_masked_vect___iop2___bit 4 -#define reg_intr_vect_r_masked_vect___iop3___lsb 5 -#define reg_intr_vect_r_masked_vect___iop3___width 1 -#define reg_intr_vect_r_masked_vect___iop3___bit 5 -#define reg_intr_vect_r_masked_vect___dma0___lsb 6 -#define reg_intr_vect_r_masked_vect___dma0___width 1 -#define reg_intr_vect_r_masked_vect___dma0___bit 6 -#define reg_intr_vect_r_masked_vect___dma1___lsb 7 -#define reg_intr_vect_r_masked_vect___dma1___width 1 -#define reg_intr_vect_r_masked_vect___dma1___bit 7 -#define reg_intr_vect_r_masked_vect___dma2___lsb 8 -#define reg_intr_vect_r_masked_vect___dma2___width 1 -#define reg_intr_vect_r_masked_vect___dma2___bit 8 -#define reg_intr_vect_r_masked_vect___dma3___lsb 9 -#define reg_intr_vect_r_masked_vect___dma3___width 1 -#define reg_intr_vect_r_masked_vect___dma3___bit 9 -#define reg_intr_vect_r_masked_vect___dma4___lsb 10 -#define reg_intr_vect_r_masked_vect___dma4___width 1 -#define reg_intr_vect_r_masked_vect___dma4___bit 10 -#define reg_intr_vect_r_masked_vect___dma5___lsb 11 -#define reg_intr_vect_r_masked_vect___dma5___width 1 -#define reg_intr_vect_r_masked_vect___dma5___bit 11 -#define reg_intr_vect_r_masked_vect___dma6___lsb 12 -#define reg_intr_vect_r_masked_vect___dma6___width 1 -#define reg_intr_vect_r_masked_vect___dma6___bit 12 -#define reg_intr_vect_r_masked_vect___dma7___lsb 13 -#define reg_intr_vect_r_masked_vect___dma7___width 1 -#define reg_intr_vect_r_masked_vect___dma7___bit 13 -#define reg_intr_vect_r_masked_vect___dma8___lsb 14 -#define reg_intr_vect_r_masked_vect___dma8___width 1 -#define reg_intr_vect_r_masked_vect___dma8___bit 14 -#define reg_intr_vect_r_masked_vect___dma9___lsb 15 -#define reg_intr_vect_r_masked_vect___dma9___width 1 -#define reg_intr_vect_r_masked_vect___dma9___bit 15 -#define reg_intr_vect_r_masked_vect___ata___lsb 16 -#define reg_intr_vect_r_masked_vect___ata___width 1 -#define reg_intr_vect_r_masked_vect___ata___bit 16 -#define reg_intr_vect_r_masked_vect___sser0___lsb 17 -#define reg_intr_vect_r_masked_vect___sser0___width 1 -#define reg_intr_vect_r_masked_vect___sser0___bit 17 -#define reg_intr_vect_r_masked_vect___sser1___lsb 18 -#define reg_intr_vect_r_masked_vect___sser1___width 1 -#define reg_intr_vect_r_masked_vect___sser1___bit 18 -#define reg_intr_vect_r_masked_vect___ser0___lsb 19 -#define reg_intr_vect_r_masked_vect___ser0___width 1 -#define reg_intr_vect_r_masked_vect___ser0___bit 19 -#define reg_intr_vect_r_masked_vect___ser1___lsb 20 -#define reg_intr_vect_r_masked_vect___ser1___width 1 -#define reg_intr_vect_r_masked_vect___ser1___bit 20 -#define reg_intr_vect_r_masked_vect___ser2___lsb 21 -#define reg_intr_vect_r_masked_vect___ser2___width 1 -#define reg_intr_vect_r_masked_vect___ser2___bit 21 -#define reg_intr_vect_r_masked_vect___ser3___lsb 22 -#define reg_intr_vect_r_masked_vect___ser3___width 1 -#define reg_intr_vect_r_masked_vect___ser3___bit 22 -#define reg_intr_vect_r_masked_vect___p21___lsb 23 -#define reg_intr_vect_r_masked_vect___p21___width 1 -#define reg_intr_vect_r_masked_vect___p21___bit 23 -#define reg_intr_vect_r_masked_vect___eth0___lsb 24 -#define reg_intr_vect_r_masked_vect___eth0___width 1 -#define reg_intr_vect_r_masked_vect___eth0___bit 24 -#define reg_intr_vect_r_masked_vect___eth1___lsb 25 -#define reg_intr_vect_r_masked_vect___eth1___width 1 -#define reg_intr_vect_r_masked_vect___eth1___bit 25 -#define reg_intr_vect_r_masked_vect___timer___lsb 26 -#define reg_intr_vect_r_masked_vect___timer___width 1 -#define reg_intr_vect_r_masked_vect___timer___bit 26 -#define reg_intr_vect_r_masked_vect___bif_arb___lsb 27 -#define reg_intr_vect_r_masked_vect___bif_arb___width 1 -#define reg_intr_vect_r_masked_vect___bif_arb___bit 27 -#define reg_intr_vect_r_masked_vect___bif_dma___lsb 28 -#define reg_intr_vect_r_masked_vect___bif_dma___width 1 -#define reg_intr_vect_r_masked_vect___bif_dma___bit 28 -#define reg_intr_vect_r_masked_vect___ext___lsb 29 -#define reg_intr_vect_r_masked_vect___ext___width 1 -#define reg_intr_vect_r_masked_vect___ext___bit 29 -#define reg_intr_vect_r_masked_vect_offset 8 - -/* Register r_nmi, scope intr_vect, type r */ -#define reg_intr_vect_r_nmi___ext___lsb 0 -#define reg_intr_vect_r_nmi___ext___width 1 -#define reg_intr_vect_r_nmi___ext___bit 0 -#define reg_intr_vect_r_nmi___watchdog___lsb 1 -#define reg_intr_vect_r_nmi___watchdog___width 1 -#define reg_intr_vect_r_nmi___watchdog___bit 1 -#define reg_intr_vect_r_nmi_offset 12 - -/* Register r_guru, scope intr_vect, type r */ -#define reg_intr_vect_r_guru___jtag___lsb 0 -#define reg_intr_vect_r_guru___jtag___width 1 -#define reg_intr_vect_r_guru___jtag___bit 0 -#define reg_intr_vect_r_guru_offset 16 - - -/* Constants */ -#define regk_intr_vect_off 0x00000000 -#define regk_intr_vect_on 0x00000001 -#define regk_intr_vect_rw_mask_default 0x00000000 -#endif /* __intr_vect_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h deleted file mode 100644 index 0c8084054840..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef __irq_nmi_defs_asm_h -#define __irq_nmi_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../mod/irq_nmi.r - * id: - * last modfied: Thu Jan 22 09:22:43 2004 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/irq_nmi_defs_asm.h ../../mod/irq_nmi.r - * id: $Id: irq_nmi_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cmd, scope irq_nmi, type rw */ -#define reg_irq_nmi_rw_cmd___delay___lsb 0 -#define reg_irq_nmi_rw_cmd___delay___width 16 -#define reg_irq_nmi_rw_cmd___op___lsb 16 -#define reg_irq_nmi_rw_cmd___op___width 2 -#define reg_irq_nmi_rw_cmd_offset 0 - - -/* Constants */ -#define regk_irq_nmi_ack_irq 0x00000002 -#define regk_irq_nmi_ack_nmi 0x00000003 -#define regk_irq_nmi_irq 0x00000000 -#define regk_irq_nmi_nmi 0x00000001 -#endif /* __irq_nmi_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h deleted file mode 100644 index 45400eb8d389..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h +++ /dev/null @@ -1,579 +0,0 @@ -#ifndef __marb_defs_asm_h -#define __marb_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Mon Apr 11 16:12:16 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/marb_defs_asm.h ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -#define STRIDE_marb_rw_int_slots 4 -/* Register rw_int_slots, scope marb, type rw */ -#define reg_marb_rw_int_slots___owner___lsb 0 -#define reg_marb_rw_int_slots___owner___width 4 -#define reg_marb_rw_int_slots_offset 0 - -#define STRIDE_marb_rw_ext_slots 4 -/* Register rw_ext_slots, scope marb, type rw */ -#define reg_marb_rw_ext_slots___owner___lsb 0 -#define reg_marb_rw_ext_slots___owner___width 4 -#define reg_marb_rw_ext_slots_offset 256 - -#define STRIDE_marb_rw_regs_slots 4 -/* Register rw_regs_slots, scope marb, type rw */ -#define reg_marb_rw_regs_slots___owner___lsb 0 -#define reg_marb_rw_regs_slots___owner___width 4 -#define reg_marb_rw_regs_slots_offset 512 - -/* Register rw_intr_mask, scope marb, type rw */ -#define reg_marb_rw_intr_mask___bp0___lsb 0 -#define reg_marb_rw_intr_mask___bp0___width 1 -#define reg_marb_rw_intr_mask___bp0___bit 0 -#define reg_marb_rw_intr_mask___bp1___lsb 1 -#define reg_marb_rw_intr_mask___bp1___width 1 -#define reg_marb_rw_intr_mask___bp1___bit 1 -#define reg_marb_rw_intr_mask___bp2___lsb 2 -#define reg_marb_rw_intr_mask___bp2___width 1 -#define reg_marb_rw_intr_mask___bp2___bit 2 -#define reg_marb_rw_intr_mask___bp3___lsb 3 -#define reg_marb_rw_intr_mask___bp3___width 1 -#define reg_marb_rw_intr_mask___bp3___bit 3 -#define reg_marb_rw_intr_mask_offset 528 - -/* Register rw_ack_intr, scope marb, type rw */ -#define reg_marb_rw_ack_intr___bp0___lsb 0 -#define reg_marb_rw_ack_intr___bp0___width 1 -#define reg_marb_rw_ack_intr___bp0___bit 0 -#define reg_marb_rw_ack_intr___bp1___lsb 1 -#define reg_marb_rw_ack_intr___bp1___width 1 -#define reg_marb_rw_ack_intr___bp1___bit 1 -#define reg_marb_rw_ack_intr___bp2___lsb 2 -#define reg_marb_rw_ack_intr___bp2___width 1 -#define reg_marb_rw_ack_intr___bp2___bit 2 -#define reg_marb_rw_ack_intr___bp3___lsb 3 -#define reg_marb_rw_ack_intr___bp3___width 1 -#define reg_marb_rw_ack_intr___bp3___bit 3 -#define reg_marb_rw_ack_intr_offset 532 - -/* Register r_intr, scope marb, type r */ -#define reg_marb_r_intr___bp0___lsb 0 -#define reg_marb_r_intr___bp0___width 1 -#define reg_marb_r_intr___bp0___bit 0 -#define reg_marb_r_intr___bp1___lsb 1 -#define reg_marb_r_intr___bp1___width 1 -#define reg_marb_r_intr___bp1___bit 1 -#define reg_marb_r_intr___bp2___lsb 2 -#define reg_marb_r_intr___bp2___width 1 -#define reg_marb_r_intr___bp2___bit 2 -#define reg_marb_r_intr___bp3___lsb 3 -#define reg_marb_r_intr___bp3___width 1 -#define reg_marb_r_intr___bp3___bit 3 -#define reg_marb_r_intr_offset 536 - -/* Register r_masked_intr, scope marb, type r */ -#define reg_marb_r_masked_intr___bp0___lsb 0 -#define reg_marb_r_masked_intr___bp0___width 1 -#define reg_marb_r_masked_intr___bp0___bit 0 -#define reg_marb_r_masked_intr___bp1___lsb 1 -#define reg_marb_r_masked_intr___bp1___width 1 -#define reg_marb_r_masked_intr___bp1___bit 1 -#define reg_marb_r_masked_intr___bp2___lsb 2 -#define reg_marb_r_masked_intr___bp2___width 1 -#define reg_marb_r_masked_intr___bp2___bit 2 -#define reg_marb_r_masked_intr___bp3___lsb 3 -#define reg_marb_r_masked_intr___bp3___width 1 -#define reg_marb_r_masked_intr___bp3___bit 3 -#define reg_marb_r_masked_intr_offset 540 - -/* Register rw_stop_mask, scope marb, type rw */ -#define reg_marb_rw_stop_mask___dma0___lsb 0 -#define reg_marb_rw_stop_mask___dma0___width 1 -#define reg_marb_rw_stop_mask___dma0___bit 0 -#define reg_marb_rw_stop_mask___dma1___lsb 1 -#define reg_marb_rw_stop_mask___dma1___width 1 -#define reg_marb_rw_stop_mask___dma1___bit 1 -#define reg_marb_rw_stop_mask___dma2___lsb 2 -#define reg_marb_rw_stop_mask___dma2___width 1 -#define reg_marb_rw_stop_mask___dma2___bit 2 -#define reg_marb_rw_stop_mask___dma3___lsb 3 -#define reg_marb_rw_stop_mask___dma3___width 1 -#define reg_marb_rw_stop_mask___dma3___bit 3 -#define reg_marb_rw_stop_mask___dma4___lsb 4 -#define reg_marb_rw_stop_mask___dma4___width 1 -#define reg_marb_rw_stop_mask___dma4___bit 4 -#define reg_marb_rw_stop_mask___dma5___lsb 5 -#define reg_marb_rw_stop_mask___dma5___width 1 -#define reg_marb_rw_stop_mask___dma5___bit 5 -#define reg_marb_rw_stop_mask___dma6___lsb 6 -#define reg_marb_rw_stop_mask___dma6___width 1 -#define reg_marb_rw_stop_mask___dma6___bit 6 -#define reg_marb_rw_stop_mask___dma7___lsb 7 -#define reg_marb_rw_stop_mask___dma7___width 1 -#define reg_marb_rw_stop_mask___dma7___bit 7 -#define reg_marb_rw_stop_mask___dma8___lsb 8 -#define reg_marb_rw_stop_mask___dma8___width 1 -#define reg_marb_rw_stop_mask___dma8___bit 8 -#define reg_marb_rw_stop_mask___dma9___lsb 9 -#define reg_marb_rw_stop_mask___dma9___width 1 -#define reg_marb_rw_stop_mask___dma9___bit 9 -#define reg_marb_rw_stop_mask___cpui___lsb 10 -#define reg_marb_rw_stop_mask___cpui___width 1 -#define reg_marb_rw_stop_mask___cpui___bit 10 -#define reg_marb_rw_stop_mask___cpud___lsb 11 -#define reg_marb_rw_stop_mask___cpud___width 1 -#define reg_marb_rw_stop_mask___cpud___bit 11 -#define reg_marb_rw_stop_mask___iop___lsb 12 -#define reg_marb_rw_stop_mask___iop___width 1 -#define reg_marb_rw_stop_mask___iop___bit 12 -#define reg_marb_rw_stop_mask___slave___lsb 13 -#define reg_marb_rw_stop_mask___slave___width 1 -#define reg_marb_rw_stop_mask___slave___bit 13 -#define reg_marb_rw_stop_mask_offset 544 - -/* Register r_stopped, scope marb, type r */ -#define reg_marb_r_stopped___dma0___lsb 0 -#define reg_marb_r_stopped___dma0___width 1 -#define reg_marb_r_stopped___dma0___bit 0 -#define reg_marb_r_stopped___dma1___lsb 1 -#define reg_marb_r_stopped___dma1___width 1 -#define reg_marb_r_stopped___dma1___bit 1 -#define reg_marb_r_stopped___dma2___lsb 2 -#define reg_marb_r_stopped___dma2___width 1 -#define reg_marb_r_stopped___dma2___bit 2 -#define reg_marb_r_stopped___dma3___lsb 3 -#define reg_marb_r_stopped___dma3___width 1 -#define reg_marb_r_stopped___dma3___bit 3 -#define reg_marb_r_stopped___dma4___lsb 4 -#define reg_marb_r_stopped___dma4___width 1 -#define reg_marb_r_stopped___dma4___bit 4 -#define reg_marb_r_stopped___dma5___lsb 5 -#define reg_marb_r_stopped___dma5___width 1 -#define reg_marb_r_stopped___dma5___bit 5 -#define reg_marb_r_stopped___dma6___lsb 6 -#define reg_marb_r_stopped___dma6___width 1 -#define reg_marb_r_stopped___dma6___bit 6 -#define reg_marb_r_stopped___dma7___lsb 7 -#define reg_marb_r_stopped___dma7___width 1 -#define reg_marb_r_stopped___dma7___bit 7 -#define reg_marb_r_stopped___dma8___lsb 8 -#define reg_marb_r_stopped___dma8___width 1 -#define reg_marb_r_stopped___dma8___bit 8 -#define reg_marb_r_stopped___dma9___lsb 9 -#define reg_marb_r_stopped___dma9___width 1 -#define reg_marb_r_stopped___dma9___bit 9 -#define reg_marb_r_stopped___cpui___lsb 10 -#define reg_marb_r_stopped___cpui___width 1 -#define reg_marb_r_stopped___cpui___bit 10 -#define reg_marb_r_stopped___cpud___lsb 11 -#define reg_marb_r_stopped___cpud___width 1 -#define reg_marb_r_stopped___cpud___bit 11 -#define reg_marb_r_stopped___iop___lsb 12 -#define reg_marb_r_stopped___iop___width 1 -#define reg_marb_r_stopped___iop___bit 12 -#define reg_marb_r_stopped___slave___lsb 13 -#define reg_marb_r_stopped___slave___width 1 -#define reg_marb_r_stopped___slave___bit 13 -#define reg_marb_r_stopped_offset 548 - -/* Register rw_no_snoop, scope marb, type rw */ -#define reg_marb_rw_no_snoop___dma0___lsb 0 -#define reg_marb_rw_no_snoop___dma0___width 1 -#define reg_marb_rw_no_snoop___dma0___bit 0 -#define reg_marb_rw_no_snoop___dma1___lsb 1 -#define reg_marb_rw_no_snoop___dma1___width 1 -#define reg_marb_rw_no_snoop___dma1___bit 1 -#define reg_marb_rw_no_snoop___dma2___lsb 2 -#define reg_marb_rw_no_snoop___dma2___width 1 -#define reg_marb_rw_no_snoop___dma2___bit 2 -#define reg_marb_rw_no_snoop___dma3___lsb 3 -#define reg_marb_rw_no_snoop___dma3___width 1 -#define reg_marb_rw_no_snoop___dma3___bit 3 -#define reg_marb_rw_no_snoop___dma4___lsb 4 -#define reg_marb_rw_no_snoop___dma4___width 1 -#define reg_marb_rw_no_snoop___dma4___bit 4 -#define reg_marb_rw_no_snoop___dma5___lsb 5 -#define reg_marb_rw_no_snoop___dma5___width 1 -#define reg_marb_rw_no_snoop___dma5___bit 5 -#define reg_marb_rw_no_snoop___dma6___lsb 6 -#define reg_marb_rw_no_snoop___dma6___width 1 -#define reg_marb_rw_no_snoop___dma6___bit 6 -#define reg_marb_rw_no_snoop___dma7___lsb 7 -#define reg_marb_rw_no_snoop___dma7___width 1 -#define reg_marb_rw_no_snoop___dma7___bit 7 -#define reg_marb_rw_no_snoop___dma8___lsb 8 -#define reg_marb_rw_no_snoop___dma8___width 1 -#define reg_marb_rw_no_snoop___dma8___bit 8 -#define reg_marb_rw_no_snoop___dma9___lsb 9 -#define reg_marb_rw_no_snoop___dma9___width 1 -#define reg_marb_rw_no_snoop___dma9___bit 9 -#define reg_marb_rw_no_snoop___cpui___lsb 10 -#define reg_marb_rw_no_snoop___cpui___width 1 -#define reg_marb_rw_no_snoop___cpui___bit 10 -#define reg_marb_rw_no_snoop___cpud___lsb 11 -#define reg_marb_rw_no_snoop___cpud___width 1 -#define reg_marb_rw_no_snoop___cpud___bit 11 -#define reg_marb_rw_no_snoop___iop___lsb 12 -#define reg_marb_rw_no_snoop___iop___width 1 -#define reg_marb_rw_no_snoop___iop___bit 12 -#define reg_marb_rw_no_snoop___slave___lsb 13 -#define reg_marb_rw_no_snoop___slave___width 1 -#define reg_marb_rw_no_snoop___slave___bit 13 -#define reg_marb_rw_no_snoop_offset 832 - -/* Register rw_no_snoop_rq, scope marb, type rw */ -#define reg_marb_rw_no_snoop_rq___cpui___lsb 10 -#define reg_marb_rw_no_snoop_rq___cpui___width 1 -#define reg_marb_rw_no_snoop_rq___cpui___bit 10 -#define reg_marb_rw_no_snoop_rq___cpud___lsb 11 -#define reg_marb_rw_no_snoop_rq___cpud___width 1 -#define reg_marb_rw_no_snoop_rq___cpud___bit 11 -#define reg_marb_rw_no_snoop_rq_offset 836 - - -/* Constants */ -#define regk_marb_cpud 0x0000000b -#define regk_marb_cpui 0x0000000a -#define regk_marb_dma0 0x00000000 -#define regk_marb_dma1 0x00000001 -#define regk_marb_dma2 0x00000002 -#define regk_marb_dma3 0x00000003 -#define regk_marb_dma4 0x00000004 -#define regk_marb_dma5 0x00000005 -#define regk_marb_dma6 0x00000006 -#define regk_marb_dma7 0x00000007 -#define regk_marb_dma8 0x00000008 -#define regk_marb_dma9 0x00000009 -#define regk_marb_iop 0x0000000c -#define regk_marb_no 0x00000000 -#define regk_marb_r_stopped_default 0x00000000 -#define regk_marb_rw_ext_slots_default 0x00000000 -#define regk_marb_rw_ext_slots_size 0x00000040 -#define regk_marb_rw_int_slots_default 0x00000000 -#define regk_marb_rw_int_slots_size 0x00000040 -#define regk_marb_rw_intr_mask_default 0x00000000 -#define regk_marb_rw_no_snoop_default 0x00000000 -#define regk_marb_rw_no_snoop_rq_default 0x00000000 -#define regk_marb_rw_regs_slots_default 0x00000000 -#define regk_marb_rw_regs_slots_size 0x00000004 -#define regk_marb_rw_stop_mask_default 0x00000000 -#define regk_marb_slave 0x0000000d -#define regk_marb_yes 0x00000001 -#endif /* __marb_defs_asm_h */ -#ifndef __marb_bp_defs_asm_h -#define __marb_bp_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Mon Apr 11 16:12:16 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/marb_defs_asm.h ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_first_addr, scope marb_bp, type rw */ -#define reg_marb_bp_rw_first_addr_offset 0 - -/* Register rw_last_addr, scope marb_bp, type rw */ -#define reg_marb_bp_rw_last_addr_offset 4 - -/* Register rw_op, scope marb_bp, type rw */ -#define reg_marb_bp_rw_op___rd___lsb 0 -#define reg_marb_bp_rw_op___rd___width 1 -#define reg_marb_bp_rw_op___rd___bit 0 -#define reg_marb_bp_rw_op___wr___lsb 1 -#define reg_marb_bp_rw_op___wr___width 1 -#define reg_marb_bp_rw_op___wr___bit 1 -#define reg_marb_bp_rw_op___rd_excl___lsb 2 -#define reg_marb_bp_rw_op___rd_excl___width 1 -#define reg_marb_bp_rw_op___rd_excl___bit 2 -#define reg_marb_bp_rw_op___pri_wr___lsb 3 -#define reg_marb_bp_rw_op___pri_wr___width 1 -#define reg_marb_bp_rw_op___pri_wr___bit 3 -#define reg_marb_bp_rw_op___us_rd___lsb 4 -#define reg_marb_bp_rw_op___us_rd___width 1 -#define reg_marb_bp_rw_op___us_rd___bit 4 -#define reg_marb_bp_rw_op___us_wr___lsb 5 -#define reg_marb_bp_rw_op___us_wr___width 1 -#define reg_marb_bp_rw_op___us_wr___bit 5 -#define reg_marb_bp_rw_op___us_rd_excl___lsb 6 -#define reg_marb_bp_rw_op___us_rd_excl___width 1 -#define reg_marb_bp_rw_op___us_rd_excl___bit 6 -#define reg_marb_bp_rw_op___us_pri_wr___lsb 7 -#define reg_marb_bp_rw_op___us_pri_wr___width 1 -#define reg_marb_bp_rw_op___us_pri_wr___bit 7 -#define reg_marb_bp_rw_op_offset 8 - -/* Register rw_clients, scope marb_bp, type rw */ -#define reg_marb_bp_rw_clients___dma0___lsb 0 -#define reg_marb_bp_rw_clients___dma0___width 1 -#define reg_marb_bp_rw_clients___dma0___bit 0 -#define reg_marb_bp_rw_clients___dma1___lsb 1 -#define reg_marb_bp_rw_clients___dma1___width 1 -#define reg_marb_bp_rw_clients___dma1___bit 1 -#define reg_marb_bp_rw_clients___dma2___lsb 2 -#define reg_marb_bp_rw_clients___dma2___width 1 -#define reg_marb_bp_rw_clients___dma2___bit 2 -#define reg_marb_bp_rw_clients___dma3___lsb 3 -#define reg_marb_bp_rw_clients___dma3___width 1 -#define reg_marb_bp_rw_clients___dma3___bit 3 -#define reg_marb_bp_rw_clients___dma4___lsb 4 -#define reg_marb_bp_rw_clients___dma4___width 1 -#define reg_marb_bp_rw_clients___dma4___bit 4 -#define reg_marb_bp_rw_clients___dma5___lsb 5 -#define reg_marb_bp_rw_clients___dma5___width 1 -#define reg_marb_bp_rw_clients___dma5___bit 5 -#define reg_marb_bp_rw_clients___dma6___lsb 6 -#define reg_marb_bp_rw_clients___dma6___width 1 -#define reg_marb_bp_rw_clients___dma6___bit 6 -#define reg_marb_bp_rw_clients___dma7___lsb 7 -#define reg_marb_bp_rw_clients___dma7___width 1 -#define reg_marb_bp_rw_clients___dma7___bit 7 -#define reg_marb_bp_rw_clients___dma8___lsb 8 -#define reg_marb_bp_rw_clients___dma8___width 1 -#define reg_marb_bp_rw_clients___dma8___bit 8 -#define reg_marb_bp_rw_clients___dma9___lsb 9 -#define reg_marb_bp_rw_clients___dma9___width 1 -#define reg_marb_bp_rw_clients___dma9___bit 9 -#define reg_marb_bp_rw_clients___cpui___lsb 10 -#define reg_marb_bp_rw_clients___cpui___width 1 -#define reg_marb_bp_rw_clients___cpui___bit 10 -#define reg_marb_bp_rw_clients___cpud___lsb 11 -#define reg_marb_bp_rw_clients___cpud___width 1 -#define reg_marb_bp_rw_clients___cpud___bit 11 -#define reg_marb_bp_rw_clients___iop___lsb 12 -#define reg_marb_bp_rw_clients___iop___width 1 -#define reg_marb_bp_rw_clients___iop___bit 12 -#define reg_marb_bp_rw_clients___slave___lsb 13 -#define reg_marb_bp_rw_clients___slave___width 1 -#define reg_marb_bp_rw_clients___slave___bit 13 -#define reg_marb_bp_rw_clients_offset 12 - -/* Register rw_options, scope marb_bp, type rw */ -#define reg_marb_bp_rw_options___wrap___lsb 0 -#define reg_marb_bp_rw_options___wrap___width 1 -#define reg_marb_bp_rw_options___wrap___bit 0 -#define reg_marb_bp_rw_options_offset 16 - -/* Register r_brk_addr, scope marb_bp, type r */ -#define reg_marb_bp_r_brk_addr_offset 20 - -/* Register r_brk_op, scope marb_bp, type r */ -#define reg_marb_bp_r_brk_op___rd___lsb 0 -#define reg_marb_bp_r_brk_op___rd___width 1 -#define reg_marb_bp_r_brk_op___rd___bit 0 -#define reg_marb_bp_r_brk_op___wr___lsb 1 -#define reg_marb_bp_r_brk_op___wr___width 1 -#define reg_marb_bp_r_brk_op___wr___bit 1 -#define reg_marb_bp_r_brk_op___rd_excl___lsb 2 -#define reg_marb_bp_r_brk_op___rd_excl___width 1 -#define reg_marb_bp_r_brk_op___rd_excl___bit 2 -#define reg_marb_bp_r_brk_op___pri_wr___lsb 3 -#define reg_marb_bp_r_brk_op___pri_wr___width 1 -#define reg_marb_bp_r_brk_op___pri_wr___bit 3 -#define reg_marb_bp_r_brk_op___us_rd___lsb 4 -#define reg_marb_bp_r_brk_op___us_rd___width 1 -#define reg_marb_bp_r_brk_op___us_rd___bit 4 -#define reg_marb_bp_r_brk_op___us_wr___lsb 5 -#define reg_marb_bp_r_brk_op___us_wr___width 1 -#define reg_marb_bp_r_brk_op___us_wr___bit 5 -#define reg_marb_bp_r_brk_op___us_rd_excl___lsb 6 -#define reg_marb_bp_r_brk_op___us_rd_excl___width 1 -#define reg_marb_bp_r_brk_op___us_rd_excl___bit 6 -#define reg_marb_bp_r_brk_op___us_pri_wr___lsb 7 -#define reg_marb_bp_r_brk_op___us_pri_wr___width 1 -#define reg_marb_bp_r_brk_op___us_pri_wr___bit 7 -#define reg_marb_bp_r_brk_op_offset 24 - -/* Register r_brk_clients, scope marb_bp, type r */ -#define reg_marb_bp_r_brk_clients___dma0___lsb 0 -#define reg_marb_bp_r_brk_clients___dma0___width 1 -#define reg_marb_bp_r_brk_clients___dma0___bit 0 -#define reg_marb_bp_r_brk_clients___dma1___lsb 1 -#define reg_marb_bp_r_brk_clients___dma1___width 1 -#define reg_marb_bp_r_brk_clients___dma1___bit 1 -#define reg_marb_bp_r_brk_clients___dma2___lsb 2 -#define reg_marb_bp_r_brk_clients___dma2___width 1 -#define reg_marb_bp_r_brk_clients___dma2___bit 2 -#define reg_marb_bp_r_brk_clients___dma3___lsb 3 -#define reg_marb_bp_r_brk_clients___dma3___width 1 -#define reg_marb_bp_r_brk_clients___dma3___bit 3 -#define reg_marb_bp_r_brk_clients___dma4___lsb 4 -#define reg_marb_bp_r_brk_clients___dma4___width 1 -#define reg_marb_bp_r_brk_clients___dma4___bit 4 -#define reg_marb_bp_r_brk_clients___dma5___lsb 5 -#define reg_marb_bp_r_brk_clients___dma5___width 1 -#define reg_marb_bp_r_brk_clients___dma5___bit 5 -#define reg_marb_bp_r_brk_clients___dma6___lsb 6 -#define reg_marb_bp_r_brk_clients___dma6___width 1 -#define reg_marb_bp_r_brk_clients___dma6___bit 6 -#define reg_marb_bp_r_brk_clients___dma7___lsb 7 -#define reg_marb_bp_r_brk_clients___dma7___width 1 -#define reg_marb_bp_r_brk_clients___dma7___bit 7 -#define reg_marb_bp_r_brk_clients___dma8___lsb 8 -#define reg_marb_bp_r_brk_clients___dma8___width 1 -#define reg_marb_bp_r_brk_clients___dma8___bit 8 -#define reg_marb_bp_r_brk_clients___dma9___lsb 9 -#define reg_marb_bp_r_brk_clients___dma9___width 1 -#define reg_marb_bp_r_brk_clients___dma9___bit 9 -#define reg_marb_bp_r_brk_clients___cpui___lsb 10 -#define reg_marb_bp_r_brk_clients___cpui___width 1 -#define reg_marb_bp_r_brk_clients___cpui___bit 10 -#define reg_marb_bp_r_brk_clients___cpud___lsb 11 -#define reg_marb_bp_r_brk_clients___cpud___width 1 -#define reg_marb_bp_r_brk_clients___cpud___bit 11 -#define reg_marb_bp_r_brk_clients___iop___lsb 12 -#define reg_marb_bp_r_brk_clients___iop___width 1 -#define reg_marb_bp_r_brk_clients___iop___bit 12 -#define reg_marb_bp_r_brk_clients___slave___lsb 13 -#define reg_marb_bp_r_brk_clients___slave___width 1 -#define reg_marb_bp_r_brk_clients___slave___bit 13 -#define reg_marb_bp_r_brk_clients_offset 28 - -/* Register r_brk_first_client, scope marb_bp, type r */ -#define reg_marb_bp_r_brk_first_client___dma0___lsb 0 -#define reg_marb_bp_r_brk_first_client___dma0___width 1 -#define reg_marb_bp_r_brk_first_client___dma0___bit 0 -#define reg_marb_bp_r_brk_first_client___dma1___lsb 1 -#define reg_marb_bp_r_brk_first_client___dma1___width 1 -#define reg_marb_bp_r_brk_first_client___dma1___bit 1 -#define reg_marb_bp_r_brk_first_client___dma2___lsb 2 -#define reg_marb_bp_r_brk_first_client___dma2___width 1 -#define reg_marb_bp_r_brk_first_client___dma2___bit 2 -#define reg_marb_bp_r_brk_first_client___dma3___lsb 3 -#define reg_marb_bp_r_brk_first_client___dma3___width 1 -#define reg_marb_bp_r_brk_first_client___dma3___bit 3 -#define reg_marb_bp_r_brk_first_client___dma4___lsb 4 -#define reg_marb_bp_r_brk_first_client___dma4___width 1 -#define reg_marb_bp_r_brk_first_client___dma4___bit 4 -#define reg_marb_bp_r_brk_first_client___dma5___lsb 5 -#define reg_marb_bp_r_brk_first_client___dma5___width 1 -#define reg_marb_bp_r_brk_first_client___dma5___bit 5 -#define reg_marb_bp_r_brk_first_client___dma6___lsb 6 -#define reg_marb_bp_r_brk_first_client___dma6___width 1 -#define reg_marb_bp_r_brk_first_client___dma6___bit 6 -#define reg_marb_bp_r_brk_first_client___dma7___lsb 7 -#define reg_marb_bp_r_brk_first_client___dma7___width 1 -#define reg_marb_bp_r_brk_first_client___dma7___bit 7 -#define reg_marb_bp_r_brk_first_client___dma8___lsb 8 -#define reg_marb_bp_r_brk_first_client___dma8___width 1 -#define reg_marb_bp_r_brk_first_client___dma8___bit 8 -#define reg_marb_bp_r_brk_first_client___dma9___lsb 9 -#define reg_marb_bp_r_brk_first_client___dma9___width 1 -#define reg_marb_bp_r_brk_first_client___dma9___bit 9 -#define reg_marb_bp_r_brk_first_client___cpui___lsb 10 -#define reg_marb_bp_r_brk_first_client___cpui___width 1 -#define reg_marb_bp_r_brk_first_client___cpui___bit 10 -#define reg_marb_bp_r_brk_first_client___cpud___lsb 11 -#define reg_marb_bp_r_brk_first_client___cpud___width 1 -#define reg_marb_bp_r_brk_first_client___cpud___bit 11 -#define reg_marb_bp_r_brk_first_client___iop___lsb 12 -#define reg_marb_bp_r_brk_first_client___iop___width 1 -#define reg_marb_bp_r_brk_first_client___iop___bit 12 -#define reg_marb_bp_r_brk_first_client___slave___lsb 13 -#define reg_marb_bp_r_brk_first_client___slave___width 1 -#define reg_marb_bp_r_brk_first_client___slave___bit 13 -#define reg_marb_bp_r_brk_first_client_offset 32 - -/* Register r_brk_size, scope marb_bp, type r */ -#define reg_marb_bp_r_brk_size_offset 36 - -/* Register rw_ack, scope marb_bp, type rw */ -#define reg_marb_bp_rw_ack_offset 40 - - -/* Constants */ -#define regk_marb_bp_no 0x00000000 -#define regk_marb_bp_rw_op_default 0x00000000 -#define regk_marb_bp_rw_options_default 0x00000000 -#define regk_marb_bp_yes 0x00000001 -#endif /* __marb_bp_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h deleted file mode 100644 index 505b7a16d878..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h +++ /dev/null @@ -1,212 +0,0 @@ -#ifndef __mmu_defs_asm_h -#define __mmu_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/mmu/doc/mmu_regs.r - * id: mmu_regs.r,v 1.12 2004/05/06 13:48:45 mikaeln Exp - * last modfied: Mon Apr 11 17:03:20 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/mmu_defs_asm.h ../../inst/mmu/doc/mmu_regs.r - * id: $Id: mmu_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_mm_cfg, scope mmu, type rw */ -#define reg_mmu_rw_mm_cfg___seg_0___lsb 0 -#define reg_mmu_rw_mm_cfg___seg_0___width 1 -#define reg_mmu_rw_mm_cfg___seg_0___bit 0 -#define reg_mmu_rw_mm_cfg___seg_1___lsb 1 -#define reg_mmu_rw_mm_cfg___seg_1___width 1 -#define reg_mmu_rw_mm_cfg___seg_1___bit 1 -#define reg_mmu_rw_mm_cfg___seg_2___lsb 2 -#define reg_mmu_rw_mm_cfg___seg_2___width 1 -#define reg_mmu_rw_mm_cfg___seg_2___bit 2 -#define reg_mmu_rw_mm_cfg___seg_3___lsb 3 -#define reg_mmu_rw_mm_cfg___seg_3___width 1 -#define reg_mmu_rw_mm_cfg___seg_3___bit 3 -#define reg_mmu_rw_mm_cfg___seg_4___lsb 4 -#define reg_mmu_rw_mm_cfg___seg_4___width 1 -#define reg_mmu_rw_mm_cfg___seg_4___bit 4 -#define reg_mmu_rw_mm_cfg___seg_5___lsb 5 -#define reg_mmu_rw_mm_cfg___seg_5___width 1 -#define reg_mmu_rw_mm_cfg___seg_5___bit 5 -#define reg_mmu_rw_mm_cfg___seg_6___lsb 6 -#define reg_mmu_rw_mm_cfg___seg_6___width 1 -#define reg_mmu_rw_mm_cfg___seg_6___bit 6 -#define reg_mmu_rw_mm_cfg___seg_7___lsb 7 -#define reg_mmu_rw_mm_cfg___seg_7___width 1 -#define reg_mmu_rw_mm_cfg___seg_7___bit 7 -#define reg_mmu_rw_mm_cfg___seg_8___lsb 8 -#define reg_mmu_rw_mm_cfg___seg_8___width 1 -#define reg_mmu_rw_mm_cfg___seg_8___bit 8 -#define reg_mmu_rw_mm_cfg___seg_9___lsb 9 -#define reg_mmu_rw_mm_cfg___seg_9___width 1 -#define reg_mmu_rw_mm_cfg___seg_9___bit 9 -#define reg_mmu_rw_mm_cfg___seg_a___lsb 10 -#define reg_mmu_rw_mm_cfg___seg_a___width 1 -#define reg_mmu_rw_mm_cfg___seg_a___bit 10 -#define reg_mmu_rw_mm_cfg___seg_b___lsb 11 -#define reg_mmu_rw_mm_cfg___seg_b___width 1 -#define reg_mmu_rw_mm_cfg___seg_b___bit 11 -#define reg_mmu_rw_mm_cfg___seg_c___lsb 12 -#define reg_mmu_rw_mm_cfg___seg_c___width 1 -#define reg_mmu_rw_mm_cfg___seg_c___bit 12 -#define reg_mmu_rw_mm_cfg___seg_d___lsb 13 -#define reg_mmu_rw_mm_cfg___seg_d___width 1 -#define reg_mmu_rw_mm_cfg___seg_d___bit 13 -#define reg_mmu_rw_mm_cfg___seg_e___lsb 14 -#define reg_mmu_rw_mm_cfg___seg_e___width 1 -#define reg_mmu_rw_mm_cfg___seg_e___bit 14 -#define reg_mmu_rw_mm_cfg___seg_f___lsb 15 -#define reg_mmu_rw_mm_cfg___seg_f___width 1 -#define reg_mmu_rw_mm_cfg___seg_f___bit 15 -#define reg_mmu_rw_mm_cfg___inv___lsb 16 -#define reg_mmu_rw_mm_cfg___inv___width 1 -#define reg_mmu_rw_mm_cfg___inv___bit 16 -#define reg_mmu_rw_mm_cfg___ex___lsb 17 -#define reg_mmu_rw_mm_cfg___ex___width 1 -#define reg_mmu_rw_mm_cfg___ex___bit 17 -#define reg_mmu_rw_mm_cfg___acc___lsb 18 -#define reg_mmu_rw_mm_cfg___acc___width 1 -#define reg_mmu_rw_mm_cfg___acc___bit 18 -#define reg_mmu_rw_mm_cfg___we___lsb 19 -#define reg_mmu_rw_mm_cfg___we___width 1 -#define reg_mmu_rw_mm_cfg___we___bit 19 -#define reg_mmu_rw_mm_cfg_offset 0 - -/* Register rw_mm_kbase_lo, scope mmu, type rw */ -#define reg_mmu_rw_mm_kbase_lo___base_0___lsb 0 -#define reg_mmu_rw_mm_kbase_lo___base_0___width 4 -#define reg_mmu_rw_mm_kbase_lo___base_1___lsb 4 -#define reg_mmu_rw_mm_kbase_lo___base_1___width 4 -#define reg_mmu_rw_mm_kbase_lo___base_2___lsb 8 -#define reg_mmu_rw_mm_kbase_lo___base_2___width 4 -#define reg_mmu_rw_mm_kbase_lo___base_3___lsb 12 -#define reg_mmu_rw_mm_kbase_lo___base_3___width 4 -#define reg_mmu_rw_mm_kbase_lo___base_4___lsb 16 -#define reg_mmu_rw_mm_kbase_lo___base_4___width 4 -#define reg_mmu_rw_mm_kbase_lo___base_5___lsb 20 -#define reg_mmu_rw_mm_kbase_lo___base_5___width 4 -#define reg_mmu_rw_mm_kbase_lo___base_6___lsb 24 -#define reg_mmu_rw_mm_kbase_lo___base_6___width 4 -#define reg_mmu_rw_mm_kbase_lo___base_7___lsb 28 -#define reg_mmu_rw_mm_kbase_lo___base_7___width 4 -#define reg_mmu_rw_mm_kbase_lo_offset 4 - -/* Register rw_mm_kbase_hi, scope mmu, type rw */ -#define reg_mmu_rw_mm_kbase_hi___base_8___lsb 0 -#define reg_mmu_rw_mm_kbase_hi___base_8___width 4 -#define reg_mmu_rw_mm_kbase_hi___base_9___lsb 4 -#define reg_mmu_rw_mm_kbase_hi___base_9___width 4 -#define reg_mmu_rw_mm_kbase_hi___base_a___lsb 8 -#define reg_mmu_rw_mm_kbase_hi___base_a___width 4 -#define reg_mmu_rw_mm_kbase_hi___base_b___lsb 12 -#define reg_mmu_rw_mm_kbase_hi___base_b___width 4 -#define reg_mmu_rw_mm_kbase_hi___base_c___lsb 16 -#define reg_mmu_rw_mm_kbase_hi___base_c___width 4 -#define reg_mmu_rw_mm_kbase_hi___base_d___lsb 20 -#define reg_mmu_rw_mm_kbase_hi___base_d___width 4 -#define reg_mmu_rw_mm_kbase_hi___base_e___lsb 24 -#define reg_mmu_rw_mm_kbase_hi___base_e___width 4 -#define reg_mmu_rw_mm_kbase_hi___base_f___lsb 28 -#define reg_mmu_rw_mm_kbase_hi___base_f___width 4 -#define reg_mmu_rw_mm_kbase_hi_offset 8 - -/* Register r_mm_cause, scope mmu, type r */ -#define reg_mmu_r_mm_cause___pid___lsb 0 -#define reg_mmu_r_mm_cause___pid___width 8 -#define reg_mmu_r_mm_cause___op___lsb 8 -#define reg_mmu_r_mm_cause___op___width 2 -#define reg_mmu_r_mm_cause___vpn___lsb 13 -#define reg_mmu_r_mm_cause___vpn___width 19 -#define reg_mmu_r_mm_cause_offset 12 - -/* Register rw_mm_tlb_sel, scope mmu, type rw */ -#define reg_mmu_rw_mm_tlb_sel___idx___lsb 0 -#define reg_mmu_rw_mm_tlb_sel___idx___width 4 -#define reg_mmu_rw_mm_tlb_sel___set___lsb 4 -#define reg_mmu_rw_mm_tlb_sel___set___width 2 -#define reg_mmu_rw_mm_tlb_sel_offset 16 - -/* Register rw_mm_tlb_lo, scope mmu, type rw */ -#define reg_mmu_rw_mm_tlb_lo___x___lsb 0 -#define reg_mmu_rw_mm_tlb_lo___x___width 1 -#define reg_mmu_rw_mm_tlb_lo___x___bit 0 -#define reg_mmu_rw_mm_tlb_lo___w___lsb 1 -#define reg_mmu_rw_mm_tlb_lo___w___width 1 -#define reg_mmu_rw_mm_tlb_lo___w___bit 1 -#define reg_mmu_rw_mm_tlb_lo___k___lsb 2 -#define reg_mmu_rw_mm_tlb_lo___k___width 1 -#define reg_mmu_rw_mm_tlb_lo___k___bit 2 -#define reg_mmu_rw_mm_tlb_lo___v___lsb 3 -#define reg_mmu_rw_mm_tlb_lo___v___width 1 -#define reg_mmu_rw_mm_tlb_lo___v___bit 3 -#define reg_mmu_rw_mm_tlb_lo___g___lsb 4 -#define reg_mmu_rw_mm_tlb_lo___g___width 1 -#define reg_mmu_rw_mm_tlb_lo___g___bit 4 -#define reg_mmu_rw_mm_tlb_lo___pfn___lsb 13 -#define reg_mmu_rw_mm_tlb_lo___pfn___width 19 -#define reg_mmu_rw_mm_tlb_lo_offset 20 - -/* Register rw_mm_tlb_hi, scope mmu, type rw */ -#define reg_mmu_rw_mm_tlb_hi___pid___lsb 0 -#define reg_mmu_rw_mm_tlb_hi___pid___width 8 -#define reg_mmu_rw_mm_tlb_hi___vpn___lsb 13 -#define reg_mmu_rw_mm_tlb_hi___vpn___width 19 -#define reg_mmu_rw_mm_tlb_hi_offset 24 - - -/* Constants */ -#define regk_mmu_execute 0x00000000 -#define regk_mmu_flush 0x00000003 -#define regk_mmu_linear 0x00000001 -#define regk_mmu_no 0x00000000 -#define regk_mmu_off 0x00000000 -#define regk_mmu_on 0x00000001 -#define regk_mmu_page 0x00000000 -#define regk_mmu_read 0x00000001 -#define regk_mmu_write 0x00000002 -#define regk_mmu_yes 0x00000001 -#endif /* __mmu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/mmu_supp_reg.h b/include/asm-cris/arch-v32/hwregs/asm/mmu_supp_reg.h deleted file mode 100644 index 339500bf3bc0..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/mmu_supp_reg.h +++ /dev/null @@ -1,7 +0,0 @@ -#define RW_MM_CFG 0 -#define RW_MM_KBASE_LO 1 -#define RW_MM_KBASE_HI 2 -#define R_MM_CAUSE 3 -#define RW_MM_TLB_SEL 4 -#define RW_MM_TLB_LO 5 -#define RW_MM_TLB_HI 6 diff --git a/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h deleted file mode 100644 index 13c725e4c774..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h +++ /dev/null @@ -1,632 +0,0 @@ -#ifndef __pinmux_defs_asm_h -#define __pinmux_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r - * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp - * last modfied: Mon Apr 11 16:09:11 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/pinmux_defs_asm.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r - * id: $Id: pinmux_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_pa, scope pinmux, type rw */ -#define reg_pinmux_rw_pa___pa0___lsb 0 -#define reg_pinmux_rw_pa___pa0___width 1 -#define reg_pinmux_rw_pa___pa0___bit 0 -#define reg_pinmux_rw_pa___pa1___lsb 1 -#define reg_pinmux_rw_pa___pa1___width 1 -#define reg_pinmux_rw_pa___pa1___bit 1 -#define reg_pinmux_rw_pa___pa2___lsb 2 -#define reg_pinmux_rw_pa___pa2___width 1 -#define reg_pinmux_rw_pa___pa2___bit 2 -#define reg_pinmux_rw_pa___pa3___lsb 3 -#define reg_pinmux_rw_pa___pa3___width 1 -#define reg_pinmux_rw_pa___pa3___bit 3 -#define reg_pinmux_rw_pa___pa4___lsb 4 -#define reg_pinmux_rw_pa___pa4___width 1 -#define reg_pinmux_rw_pa___pa4___bit 4 -#define reg_pinmux_rw_pa___pa5___lsb 5 -#define reg_pinmux_rw_pa___pa5___width 1 -#define reg_pinmux_rw_pa___pa5___bit 5 -#define reg_pinmux_rw_pa___pa6___lsb 6 -#define reg_pinmux_rw_pa___pa6___width 1 -#define reg_pinmux_rw_pa___pa6___bit 6 -#define reg_pinmux_rw_pa___pa7___lsb 7 -#define reg_pinmux_rw_pa___pa7___width 1 -#define reg_pinmux_rw_pa___pa7___bit 7 -#define reg_pinmux_rw_pa___csp2_n___lsb 8 -#define reg_pinmux_rw_pa___csp2_n___width 1 -#define reg_pinmux_rw_pa___csp2_n___bit 8 -#define reg_pinmux_rw_pa___csp3_n___lsb 9 -#define reg_pinmux_rw_pa___csp3_n___width 1 -#define reg_pinmux_rw_pa___csp3_n___bit 9 -#define reg_pinmux_rw_pa___csp5_n___lsb 10 -#define reg_pinmux_rw_pa___csp5_n___width 1 -#define reg_pinmux_rw_pa___csp5_n___bit 10 -#define reg_pinmux_rw_pa___csp6_n___lsb 11 -#define reg_pinmux_rw_pa___csp6_n___width 1 -#define reg_pinmux_rw_pa___csp6_n___bit 11 -#define reg_pinmux_rw_pa___hsh4___lsb 12 -#define reg_pinmux_rw_pa___hsh4___width 1 -#define reg_pinmux_rw_pa___hsh4___bit 12 -#define reg_pinmux_rw_pa___hsh5___lsb 13 -#define reg_pinmux_rw_pa___hsh5___width 1 -#define reg_pinmux_rw_pa___hsh5___bit 13 -#define reg_pinmux_rw_pa___hsh6___lsb 14 -#define reg_pinmux_rw_pa___hsh6___width 1 -#define reg_pinmux_rw_pa___hsh6___bit 14 -#define reg_pinmux_rw_pa___hsh7___lsb 15 -#define reg_pinmux_rw_pa___hsh7___width 1 -#define reg_pinmux_rw_pa___hsh7___bit 15 -#define reg_pinmux_rw_pa_offset 0 - -/* Register rw_hwprot, scope pinmux, type rw */ -#define reg_pinmux_rw_hwprot___ser1___lsb 0 -#define reg_pinmux_rw_hwprot___ser1___width 1 -#define reg_pinmux_rw_hwprot___ser1___bit 0 -#define reg_pinmux_rw_hwprot___ser2___lsb 1 -#define reg_pinmux_rw_hwprot___ser2___width 1 -#define reg_pinmux_rw_hwprot___ser2___bit 1 -#define reg_pinmux_rw_hwprot___ser3___lsb 2 -#define reg_pinmux_rw_hwprot___ser3___width 1 -#define reg_pinmux_rw_hwprot___ser3___bit 2 -#define reg_pinmux_rw_hwprot___sser0___lsb 3 -#define reg_pinmux_rw_hwprot___sser0___width 1 -#define reg_pinmux_rw_hwprot___sser0___bit 3 -#define reg_pinmux_rw_hwprot___sser1___lsb 4 -#define reg_pinmux_rw_hwprot___sser1___width 1 -#define reg_pinmux_rw_hwprot___sser1___bit 4 -#define reg_pinmux_rw_hwprot___ata0___lsb 5 -#define reg_pinmux_rw_hwprot___ata0___width 1 -#define reg_pinmux_rw_hwprot___ata0___bit 5 -#define reg_pinmux_rw_hwprot___ata1___lsb 6 -#define reg_pinmux_rw_hwprot___ata1___width 1 -#define reg_pinmux_rw_hwprot___ata1___bit 6 -#define reg_pinmux_rw_hwprot___ata2___lsb 7 -#define reg_pinmux_rw_hwprot___ata2___width 1 -#define reg_pinmux_rw_hwprot___ata2___bit 7 -#define reg_pinmux_rw_hwprot___ata3___lsb 8 -#define reg_pinmux_rw_hwprot___ata3___width 1 -#define reg_pinmux_rw_hwprot___ata3___bit 8 -#define reg_pinmux_rw_hwprot___ata___lsb 9 -#define reg_pinmux_rw_hwprot___ata___width 1 -#define reg_pinmux_rw_hwprot___ata___bit 9 -#define reg_pinmux_rw_hwprot___eth1___lsb 10 -#define reg_pinmux_rw_hwprot___eth1___width 1 -#define reg_pinmux_rw_hwprot___eth1___bit 10 -#define reg_pinmux_rw_hwprot___eth1_mgm___lsb 11 -#define reg_pinmux_rw_hwprot___eth1_mgm___width 1 -#define reg_pinmux_rw_hwprot___eth1_mgm___bit 11 -#define reg_pinmux_rw_hwprot___timer___lsb 12 -#define reg_pinmux_rw_hwprot___timer___width 1 -#define reg_pinmux_rw_hwprot___timer___bit 12 -#define reg_pinmux_rw_hwprot___p21___lsb 13 -#define reg_pinmux_rw_hwprot___p21___width 1 -#define reg_pinmux_rw_hwprot___p21___bit 13 -#define reg_pinmux_rw_hwprot_offset 4 - -/* Register rw_pb_gio, scope pinmux, type rw */ -#define reg_pinmux_rw_pb_gio___pb0___lsb 0 -#define reg_pinmux_rw_pb_gio___pb0___width 1 -#define reg_pinmux_rw_pb_gio___pb0___bit 0 -#define reg_pinmux_rw_pb_gio___pb1___lsb 1 -#define reg_pinmux_rw_pb_gio___pb1___width 1 -#define reg_pinmux_rw_pb_gio___pb1___bit 1 -#define reg_pinmux_rw_pb_gio___pb2___lsb 2 -#define reg_pinmux_rw_pb_gio___pb2___width 1 -#define reg_pinmux_rw_pb_gio___pb2___bit 2 -#define reg_pinmux_rw_pb_gio___pb3___lsb 3 -#define reg_pinmux_rw_pb_gio___pb3___width 1 -#define reg_pinmux_rw_pb_gio___pb3___bit 3 -#define reg_pinmux_rw_pb_gio___pb4___lsb 4 -#define reg_pinmux_rw_pb_gio___pb4___width 1 -#define reg_pinmux_rw_pb_gio___pb4___bit 4 -#define reg_pinmux_rw_pb_gio___pb5___lsb 5 -#define reg_pinmux_rw_pb_gio___pb5___width 1 -#define reg_pinmux_rw_pb_gio___pb5___bit 5 -#define reg_pinmux_rw_pb_gio___pb6___lsb 6 -#define reg_pinmux_rw_pb_gio___pb6___width 1 -#define reg_pinmux_rw_pb_gio___pb6___bit 6 -#define reg_pinmux_rw_pb_gio___pb7___lsb 7 -#define reg_pinmux_rw_pb_gio___pb7___width 1 -#define reg_pinmux_rw_pb_gio___pb7___bit 7 -#define reg_pinmux_rw_pb_gio___pb8___lsb 8 -#define reg_pinmux_rw_pb_gio___pb8___width 1 -#define reg_pinmux_rw_pb_gio___pb8___bit 8 -#define reg_pinmux_rw_pb_gio___pb9___lsb 9 -#define reg_pinmux_rw_pb_gio___pb9___width 1 -#define reg_pinmux_rw_pb_gio___pb9___bit 9 -#define reg_pinmux_rw_pb_gio___pb10___lsb 10 -#define reg_pinmux_rw_pb_gio___pb10___width 1 -#define reg_pinmux_rw_pb_gio___pb10___bit 10 -#define reg_pinmux_rw_pb_gio___pb11___lsb 11 -#define reg_pinmux_rw_pb_gio___pb11___width 1 -#define reg_pinmux_rw_pb_gio___pb11___bit 11 -#define reg_pinmux_rw_pb_gio___pb12___lsb 12 -#define reg_pinmux_rw_pb_gio___pb12___width 1 -#define reg_pinmux_rw_pb_gio___pb12___bit 12 -#define reg_pinmux_rw_pb_gio___pb13___lsb 13 -#define reg_pinmux_rw_pb_gio___pb13___width 1 -#define reg_pinmux_rw_pb_gio___pb13___bit 13 -#define reg_pinmux_rw_pb_gio___pb14___lsb 14 -#define reg_pinmux_rw_pb_gio___pb14___width 1 -#define reg_pinmux_rw_pb_gio___pb14___bit 14 -#define reg_pinmux_rw_pb_gio___pb15___lsb 15 -#define reg_pinmux_rw_pb_gio___pb15___width 1 -#define reg_pinmux_rw_pb_gio___pb15___bit 15 -#define reg_pinmux_rw_pb_gio___pb16___lsb 16 -#define reg_pinmux_rw_pb_gio___pb16___width 1 -#define reg_pinmux_rw_pb_gio___pb16___bit 16 -#define reg_pinmux_rw_pb_gio___pb17___lsb 17 -#define reg_pinmux_rw_pb_gio___pb17___width 1 -#define reg_pinmux_rw_pb_gio___pb17___bit 17 -#define reg_pinmux_rw_pb_gio_offset 8 - -/* Register rw_pb_iop, scope pinmux, type rw */ -#define reg_pinmux_rw_pb_iop___pb0___lsb 0 -#define reg_pinmux_rw_pb_iop___pb0___width 1 -#define reg_pinmux_rw_pb_iop___pb0___bit 0 -#define reg_pinmux_rw_pb_iop___pb1___lsb 1 -#define reg_pinmux_rw_pb_iop___pb1___width 1 -#define reg_pinmux_rw_pb_iop___pb1___bit 1 -#define reg_pinmux_rw_pb_iop___pb2___lsb 2 -#define reg_pinmux_rw_pb_iop___pb2___width 1 -#define reg_pinmux_rw_pb_iop___pb2___bit 2 -#define reg_pinmux_rw_pb_iop___pb3___lsb 3 -#define reg_pinmux_rw_pb_iop___pb3___width 1 -#define reg_pinmux_rw_pb_iop___pb3___bit 3 -#define reg_pinmux_rw_pb_iop___pb4___lsb 4 -#define reg_pinmux_rw_pb_iop___pb4___width 1 -#define reg_pinmux_rw_pb_iop___pb4___bit 4 -#define reg_pinmux_rw_pb_iop___pb5___lsb 5 -#define reg_pinmux_rw_pb_iop___pb5___width 1 -#define reg_pinmux_rw_pb_iop___pb5___bit 5 -#define reg_pinmux_rw_pb_iop___pb6___lsb 6 -#define reg_pinmux_rw_pb_iop___pb6___width 1 -#define reg_pinmux_rw_pb_iop___pb6___bit 6 -#define reg_pinmux_rw_pb_iop___pb7___lsb 7 -#define reg_pinmux_rw_pb_iop___pb7___width 1 -#define reg_pinmux_rw_pb_iop___pb7___bit 7 -#define reg_pinmux_rw_pb_iop___pb8___lsb 8 -#define reg_pinmux_rw_pb_iop___pb8___width 1 -#define reg_pinmux_rw_pb_iop___pb8___bit 8 -#define reg_pinmux_rw_pb_iop___pb9___lsb 9 -#define reg_pinmux_rw_pb_iop___pb9___width 1 -#define reg_pinmux_rw_pb_iop___pb9___bit 9 -#define reg_pinmux_rw_pb_iop___pb10___lsb 10 -#define reg_pinmux_rw_pb_iop___pb10___width 1 -#define reg_pinmux_rw_pb_iop___pb10___bit 10 -#define reg_pinmux_rw_pb_iop___pb11___lsb 11 -#define reg_pinmux_rw_pb_iop___pb11___width 1 -#define reg_pinmux_rw_pb_iop___pb11___bit 11 -#define reg_pinmux_rw_pb_iop___pb12___lsb 12 -#define reg_pinmux_rw_pb_iop___pb12___width 1 -#define reg_pinmux_rw_pb_iop___pb12___bit 12 -#define reg_pinmux_rw_pb_iop___pb13___lsb 13 -#define reg_pinmux_rw_pb_iop___pb13___width 1 -#define reg_pinmux_rw_pb_iop___pb13___bit 13 -#define reg_pinmux_rw_pb_iop___pb14___lsb 14 -#define reg_pinmux_rw_pb_iop___pb14___width 1 -#define reg_pinmux_rw_pb_iop___pb14___bit 14 -#define reg_pinmux_rw_pb_iop___pb15___lsb 15 -#define reg_pinmux_rw_pb_iop___pb15___width 1 -#define reg_pinmux_rw_pb_iop___pb15___bit 15 -#define reg_pinmux_rw_pb_iop___pb16___lsb 16 -#define reg_pinmux_rw_pb_iop___pb16___width 1 -#define reg_pinmux_rw_pb_iop___pb16___bit 16 -#define reg_pinmux_rw_pb_iop___pb17___lsb 17 -#define reg_pinmux_rw_pb_iop___pb17___width 1 -#define reg_pinmux_rw_pb_iop___pb17___bit 17 -#define reg_pinmux_rw_pb_iop_offset 12 - -/* Register rw_pc_gio, scope pinmux, type rw */ -#define reg_pinmux_rw_pc_gio___pc0___lsb 0 -#define reg_pinmux_rw_pc_gio___pc0___width 1 -#define reg_pinmux_rw_pc_gio___pc0___bit 0 -#define reg_pinmux_rw_pc_gio___pc1___lsb 1 -#define reg_pinmux_rw_pc_gio___pc1___width 1 -#define reg_pinmux_rw_pc_gio___pc1___bit 1 -#define reg_pinmux_rw_pc_gio___pc2___lsb 2 -#define reg_pinmux_rw_pc_gio___pc2___width 1 -#define reg_pinmux_rw_pc_gio___pc2___bit 2 -#define reg_pinmux_rw_pc_gio___pc3___lsb 3 -#define reg_pinmux_rw_pc_gio___pc3___width 1 -#define reg_pinmux_rw_pc_gio___pc3___bit 3 -#define reg_pinmux_rw_pc_gio___pc4___lsb 4 -#define reg_pinmux_rw_pc_gio___pc4___width 1 -#define reg_pinmux_rw_pc_gio___pc4___bit 4 -#define reg_pinmux_rw_pc_gio___pc5___lsb 5 -#define reg_pinmux_rw_pc_gio___pc5___width 1 -#define reg_pinmux_rw_pc_gio___pc5___bit 5 -#define reg_pinmux_rw_pc_gio___pc6___lsb 6 -#define reg_pinmux_rw_pc_gio___pc6___width 1 -#define reg_pinmux_rw_pc_gio___pc6___bit 6 -#define reg_pinmux_rw_pc_gio___pc7___lsb 7 -#define reg_pinmux_rw_pc_gio___pc7___width 1 -#define reg_pinmux_rw_pc_gio___pc7___bit 7 -#define reg_pinmux_rw_pc_gio___pc8___lsb 8 -#define reg_pinmux_rw_pc_gio___pc8___width 1 -#define reg_pinmux_rw_pc_gio___pc8___bit 8 -#define reg_pinmux_rw_pc_gio___pc9___lsb 9 -#define reg_pinmux_rw_pc_gio___pc9___width 1 -#define reg_pinmux_rw_pc_gio___pc9___bit 9 -#define reg_pinmux_rw_pc_gio___pc10___lsb 10 -#define reg_pinmux_rw_pc_gio___pc10___width 1 -#define reg_pinmux_rw_pc_gio___pc10___bit 10 -#define reg_pinmux_rw_pc_gio___pc11___lsb 11 -#define reg_pinmux_rw_pc_gio___pc11___width 1 -#define reg_pinmux_rw_pc_gio___pc11___bit 11 -#define reg_pinmux_rw_pc_gio___pc12___lsb 12 -#define reg_pinmux_rw_pc_gio___pc12___width 1 -#define reg_pinmux_rw_pc_gio___pc12___bit 12 -#define reg_pinmux_rw_pc_gio___pc13___lsb 13 -#define reg_pinmux_rw_pc_gio___pc13___width 1 -#define reg_pinmux_rw_pc_gio___pc13___bit 13 -#define reg_pinmux_rw_pc_gio___pc14___lsb 14 -#define reg_pinmux_rw_pc_gio___pc14___width 1 -#define reg_pinmux_rw_pc_gio___pc14___bit 14 -#define reg_pinmux_rw_pc_gio___pc15___lsb 15 -#define reg_pinmux_rw_pc_gio___pc15___width 1 -#define reg_pinmux_rw_pc_gio___pc15___bit 15 -#define reg_pinmux_rw_pc_gio___pc16___lsb 16 -#define reg_pinmux_rw_pc_gio___pc16___width 1 -#define reg_pinmux_rw_pc_gio___pc16___bit 16 -#define reg_pinmux_rw_pc_gio___pc17___lsb 17 -#define reg_pinmux_rw_pc_gio___pc17___width 1 -#define reg_pinmux_rw_pc_gio___pc17___bit 17 -#define reg_pinmux_rw_pc_gio_offset 16 - -/* Register rw_pc_iop, scope pinmux, type rw */ -#define reg_pinmux_rw_pc_iop___pc0___lsb 0 -#define reg_pinmux_rw_pc_iop___pc0___width 1 -#define reg_pinmux_rw_pc_iop___pc0___bit 0 -#define reg_pinmux_rw_pc_iop___pc1___lsb 1 -#define reg_pinmux_rw_pc_iop___pc1___width 1 -#define reg_pinmux_rw_pc_iop___pc1___bit 1 -#define reg_pinmux_rw_pc_iop___pc2___lsb 2 -#define reg_pinmux_rw_pc_iop___pc2___width 1 -#define reg_pinmux_rw_pc_iop___pc2___bit 2 -#define reg_pinmux_rw_pc_iop___pc3___lsb 3 -#define reg_pinmux_rw_pc_iop___pc3___width 1 -#define reg_pinmux_rw_pc_iop___pc3___bit 3 -#define reg_pinmux_rw_pc_iop___pc4___lsb 4 -#define reg_pinmux_rw_pc_iop___pc4___width 1 -#define reg_pinmux_rw_pc_iop___pc4___bit 4 -#define reg_pinmux_rw_pc_iop___pc5___lsb 5 -#define reg_pinmux_rw_pc_iop___pc5___width 1 -#define reg_pinmux_rw_pc_iop___pc5___bit 5 -#define reg_pinmux_rw_pc_iop___pc6___lsb 6 -#define reg_pinmux_rw_pc_iop___pc6___width 1 -#define reg_pinmux_rw_pc_iop___pc6___bit 6 -#define reg_pinmux_rw_pc_iop___pc7___lsb 7 -#define reg_pinmux_rw_pc_iop___pc7___width 1 -#define reg_pinmux_rw_pc_iop___pc7___bit 7 -#define reg_pinmux_rw_pc_iop___pc8___lsb 8 -#define reg_pinmux_rw_pc_iop___pc8___width 1 -#define reg_pinmux_rw_pc_iop___pc8___bit 8 -#define reg_pinmux_rw_pc_iop___pc9___lsb 9 -#define reg_pinmux_rw_pc_iop___pc9___width 1 -#define reg_pinmux_rw_pc_iop___pc9___bit 9 -#define reg_pinmux_rw_pc_iop___pc10___lsb 10 -#define reg_pinmux_rw_pc_iop___pc10___width 1 -#define reg_pinmux_rw_pc_iop___pc10___bit 10 -#define reg_pinmux_rw_pc_iop___pc11___lsb 11 -#define reg_pinmux_rw_pc_iop___pc11___width 1 -#define reg_pinmux_rw_pc_iop___pc11___bit 11 -#define reg_pinmux_rw_pc_iop___pc12___lsb 12 -#define reg_pinmux_rw_pc_iop___pc12___width 1 -#define reg_pinmux_rw_pc_iop___pc12___bit 12 -#define reg_pinmux_rw_pc_iop___pc13___lsb 13 -#define reg_pinmux_rw_pc_iop___pc13___width 1 -#define reg_pinmux_rw_pc_iop___pc13___bit 13 -#define reg_pinmux_rw_pc_iop___pc14___lsb 14 -#define reg_pinmux_rw_pc_iop___pc14___width 1 -#define reg_pinmux_rw_pc_iop___pc14___bit 14 -#define reg_pinmux_rw_pc_iop___pc15___lsb 15 -#define reg_pinmux_rw_pc_iop___pc15___width 1 -#define reg_pinmux_rw_pc_iop___pc15___bit 15 -#define reg_pinmux_rw_pc_iop___pc16___lsb 16 -#define reg_pinmux_rw_pc_iop___pc16___width 1 -#define reg_pinmux_rw_pc_iop___pc16___bit 16 -#define reg_pinmux_rw_pc_iop___pc17___lsb 17 -#define reg_pinmux_rw_pc_iop___pc17___width 1 -#define reg_pinmux_rw_pc_iop___pc17___bit 17 -#define reg_pinmux_rw_pc_iop_offset 20 - -/* Register rw_pd_gio, scope pinmux, type rw */ -#define reg_pinmux_rw_pd_gio___pd0___lsb 0 -#define reg_pinmux_rw_pd_gio___pd0___width 1 -#define reg_pinmux_rw_pd_gio___pd0___bit 0 -#define reg_pinmux_rw_pd_gio___pd1___lsb 1 -#define reg_pinmux_rw_pd_gio___pd1___width 1 -#define reg_pinmux_rw_pd_gio___pd1___bit 1 -#define reg_pinmux_rw_pd_gio___pd2___lsb 2 -#define reg_pinmux_rw_pd_gio___pd2___width 1 -#define reg_pinmux_rw_pd_gio___pd2___bit 2 -#define reg_pinmux_rw_pd_gio___pd3___lsb 3 -#define reg_pinmux_rw_pd_gio___pd3___width 1 -#define reg_pinmux_rw_pd_gio___pd3___bit 3 -#define reg_pinmux_rw_pd_gio___pd4___lsb 4 -#define reg_pinmux_rw_pd_gio___pd4___width 1 -#define reg_pinmux_rw_pd_gio___pd4___bit 4 -#define reg_pinmux_rw_pd_gio___pd5___lsb 5 -#define reg_pinmux_rw_pd_gio___pd5___width 1 -#define reg_pinmux_rw_pd_gio___pd5___bit 5 -#define reg_pinmux_rw_pd_gio___pd6___lsb 6 -#define reg_pinmux_rw_pd_gio___pd6___width 1 -#define reg_pinmux_rw_pd_gio___pd6___bit 6 -#define reg_pinmux_rw_pd_gio___pd7___lsb 7 -#define reg_pinmux_rw_pd_gio___pd7___width 1 -#define reg_pinmux_rw_pd_gio___pd7___bit 7 -#define reg_pinmux_rw_pd_gio___pd8___lsb 8 -#define reg_pinmux_rw_pd_gio___pd8___width 1 -#define reg_pinmux_rw_pd_gio___pd8___bit 8 -#define reg_pinmux_rw_pd_gio___pd9___lsb 9 -#define reg_pinmux_rw_pd_gio___pd9___width 1 -#define reg_pinmux_rw_pd_gio___pd9___bit 9 -#define reg_pinmux_rw_pd_gio___pd10___lsb 10 -#define reg_pinmux_rw_pd_gio___pd10___width 1 -#define reg_pinmux_rw_pd_gio___pd10___bit 10 -#define reg_pinmux_rw_pd_gio___pd11___lsb 11 -#define reg_pinmux_rw_pd_gio___pd11___width 1 -#define reg_pinmux_rw_pd_gio___pd11___bit 11 -#define reg_pinmux_rw_pd_gio___pd12___lsb 12 -#define reg_pinmux_rw_pd_gio___pd12___width 1 -#define reg_pinmux_rw_pd_gio___pd12___bit 12 -#define reg_pinmux_rw_pd_gio___pd13___lsb 13 -#define reg_pinmux_rw_pd_gio___pd13___width 1 -#define reg_pinmux_rw_pd_gio___pd13___bit 13 -#define reg_pinmux_rw_pd_gio___pd14___lsb 14 -#define reg_pinmux_rw_pd_gio___pd14___width 1 -#define reg_pinmux_rw_pd_gio___pd14___bit 14 -#define reg_pinmux_rw_pd_gio___pd15___lsb 15 -#define reg_pinmux_rw_pd_gio___pd15___width 1 -#define reg_pinmux_rw_pd_gio___pd15___bit 15 -#define reg_pinmux_rw_pd_gio___pd16___lsb 16 -#define reg_pinmux_rw_pd_gio___pd16___width 1 -#define reg_pinmux_rw_pd_gio___pd16___bit 16 -#define reg_pinmux_rw_pd_gio___pd17___lsb 17 -#define reg_pinmux_rw_pd_gio___pd17___width 1 -#define reg_pinmux_rw_pd_gio___pd17___bit 17 -#define reg_pinmux_rw_pd_gio_offset 24 - -/* Register rw_pd_iop, scope pinmux, type rw */ -#define reg_pinmux_rw_pd_iop___pd0___lsb 0 -#define reg_pinmux_rw_pd_iop___pd0___width 1 -#define reg_pinmux_rw_pd_iop___pd0___bit 0 -#define reg_pinmux_rw_pd_iop___pd1___lsb 1 -#define reg_pinmux_rw_pd_iop___pd1___width 1 -#define reg_pinmux_rw_pd_iop___pd1___bit 1 -#define reg_pinmux_rw_pd_iop___pd2___lsb 2 -#define reg_pinmux_rw_pd_iop___pd2___width 1 -#define reg_pinmux_rw_pd_iop___pd2___bit 2 -#define reg_pinmux_rw_pd_iop___pd3___lsb 3 -#define reg_pinmux_rw_pd_iop___pd3___width 1 -#define reg_pinmux_rw_pd_iop___pd3___bit 3 -#define reg_pinmux_rw_pd_iop___pd4___lsb 4 -#define reg_pinmux_rw_pd_iop___pd4___width 1 -#define reg_pinmux_rw_pd_iop___pd4___bit 4 -#define reg_pinmux_rw_pd_iop___pd5___lsb 5 -#define reg_pinmux_rw_pd_iop___pd5___width 1 -#define reg_pinmux_rw_pd_iop___pd5___bit 5 -#define reg_pinmux_rw_pd_iop___pd6___lsb 6 -#define reg_pinmux_rw_pd_iop___pd6___width 1 -#define reg_pinmux_rw_pd_iop___pd6___bit 6 -#define reg_pinmux_rw_pd_iop___pd7___lsb 7 -#define reg_pinmux_rw_pd_iop___pd7___width 1 -#define reg_pinmux_rw_pd_iop___pd7___bit 7 -#define reg_pinmux_rw_pd_iop___pd8___lsb 8 -#define reg_pinmux_rw_pd_iop___pd8___width 1 -#define reg_pinmux_rw_pd_iop___pd8___bit 8 -#define reg_pinmux_rw_pd_iop___pd9___lsb 9 -#define reg_pinmux_rw_pd_iop___pd9___width 1 -#define reg_pinmux_rw_pd_iop___pd9___bit 9 -#define reg_pinmux_rw_pd_iop___pd10___lsb 10 -#define reg_pinmux_rw_pd_iop___pd10___width 1 -#define reg_pinmux_rw_pd_iop___pd10___bit 10 -#define reg_pinmux_rw_pd_iop___pd11___lsb 11 -#define reg_pinmux_rw_pd_iop___pd11___width 1 -#define reg_pinmux_rw_pd_iop___pd11___bit 11 -#define reg_pinmux_rw_pd_iop___pd12___lsb 12 -#define reg_pinmux_rw_pd_iop___pd12___width 1 -#define reg_pinmux_rw_pd_iop___pd12___bit 12 -#define reg_pinmux_rw_pd_iop___pd13___lsb 13 -#define reg_pinmux_rw_pd_iop___pd13___width 1 -#define reg_pinmux_rw_pd_iop___pd13___bit 13 -#define reg_pinmux_rw_pd_iop___pd14___lsb 14 -#define reg_pinmux_rw_pd_iop___pd14___width 1 -#define reg_pinmux_rw_pd_iop___pd14___bit 14 -#define reg_pinmux_rw_pd_iop___pd15___lsb 15 -#define reg_pinmux_rw_pd_iop___pd15___width 1 -#define reg_pinmux_rw_pd_iop___pd15___bit 15 -#define reg_pinmux_rw_pd_iop___pd16___lsb 16 -#define reg_pinmux_rw_pd_iop___pd16___width 1 -#define reg_pinmux_rw_pd_iop___pd16___bit 16 -#define reg_pinmux_rw_pd_iop___pd17___lsb 17 -#define reg_pinmux_rw_pd_iop___pd17___width 1 -#define reg_pinmux_rw_pd_iop___pd17___bit 17 -#define reg_pinmux_rw_pd_iop_offset 28 - -/* Register rw_pe_gio, scope pinmux, type rw */ -#define reg_pinmux_rw_pe_gio___pe0___lsb 0 -#define reg_pinmux_rw_pe_gio___pe0___width 1 -#define reg_pinmux_rw_pe_gio___pe0___bit 0 -#define reg_pinmux_rw_pe_gio___pe1___lsb 1 -#define reg_pinmux_rw_pe_gio___pe1___width 1 -#define reg_pinmux_rw_pe_gio___pe1___bit 1 -#define reg_pinmux_rw_pe_gio___pe2___lsb 2 -#define reg_pinmux_rw_pe_gio___pe2___width 1 -#define reg_pinmux_rw_pe_gio___pe2___bit 2 -#define reg_pinmux_rw_pe_gio___pe3___lsb 3 -#define reg_pinmux_rw_pe_gio___pe3___width 1 -#define reg_pinmux_rw_pe_gio___pe3___bit 3 -#define reg_pinmux_rw_pe_gio___pe4___lsb 4 -#define reg_pinmux_rw_pe_gio___pe4___width 1 -#define reg_pinmux_rw_pe_gio___pe4___bit 4 -#define reg_pinmux_rw_pe_gio___pe5___lsb 5 -#define reg_pinmux_rw_pe_gio___pe5___width 1 -#define reg_pinmux_rw_pe_gio___pe5___bit 5 -#define reg_pinmux_rw_pe_gio___pe6___lsb 6 -#define reg_pinmux_rw_pe_gio___pe6___width 1 -#define reg_pinmux_rw_pe_gio___pe6___bit 6 -#define reg_pinmux_rw_pe_gio___pe7___lsb 7 -#define reg_pinmux_rw_pe_gio___pe7___width 1 -#define reg_pinmux_rw_pe_gio___pe7___bit 7 -#define reg_pinmux_rw_pe_gio___pe8___lsb 8 -#define reg_pinmux_rw_pe_gio___pe8___width 1 -#define reg_pinmux_rw_pe_gio___pe8___bit 8 -#define reg_pinmux_rw_pe_gio___pe9___lsb 9 -#define reg_pinmux_rw_pe_gio___pe9___width 1 -#define reg_pinmux_rw_pe_gio___pe9___bit 9 -#define reg_pinmux_rw_pe_gio___pe10___lsb 10 -#define reg_pinmux_rw_pe_gio___pe10___width 1 -#define reg_pinmux_rw_pe_gio___pe10___bit 10 -#define reg_pinmux_rw_pe_gio___pe11___lsb 11 -#define reg_pinmux_rw_pe_gio___pe11___width 1 -#define reg_pinmux_rw_pe_gio___pe11___bit 11 -#define reg_pinmux_rw_pe_gio___pe12___lsb 12 -#define reg_pinmux_rw_pe_gio___pe12___width 1 -#define reg_pinmux_rw_pe_gio___pe12___bit 12 -#define reg_pinmux_rw_pe_gio___pe13___lsb 13 -#define reg_pinmux_rw_pe_gio___pe13___width 1 -#define reg_pinmux_rw_pe_gio___pe13___bit 13 -#define reg_pinmux_rw_pe_gio___pe14___lsb 14 -#define reg_pinmux_rw_pe_gio___pe14___width 1 -#define reg_pinmux_rw_pe_gio___pe14___bit 14 -#define reg_pinmux_rw_pe_gio___pe15___lsb 15 -#define reg_pinmux_rw_pe_gio___pe15___width 1 -#define reg_pinmux_rw_pe_gio___pe15___bit 15 -#define reg_pinmux_rw_pe_gio___pe16___lsb 16 -#define reg_pinmux_rw_pe_gio___pe16___width 1 -#define reg_pinmux_rw_pe_gio___pe16___bit 16 -#define reg_pinmux_rw_pe_gio___pe17___lsb 17 -#define reg_pinmux_rw_pe_gio___pe17___width 1 -#define reg_pinmux_rw_pe_gio___pe17___bit 17 -#define reg_pinmux_rw_pe_gio_offset 32 - -/* Register rw_pe_iop, scope pinmux, type rw */ -#define reg_pinmux_rw_pe_iop___pe0___lsb 0 -#define reg_pinmux_rw_pe_iop___pe0___width 1 -#define reg_pinmux_rw_pe_iop___pe0___bit 0 -#define reg_pinmux_rw_pe_iop___pe1___lsb 1 -#define reg_pinmux_rw_pe_iop___pe1___width 1 -#define reg_pinmux_rw_pe_iop___pe1___bit 1 -#define reg_pinmux_rw_pe_iop___pe2___lsb 2 -#define reg_pinmux_rw_pe_iop___pe2___width 1 -#define reg_pinmux_rw_pe_iop___pe2___bit 2 -#define reg_pinmux_rw_pe_iop___pe3___lsb 3 -#define reg_pinmux_rw_pe_iop___pe3___width 1 -#define reg_pinmux_rw_pe_iop___pe3___bit 3 -#define reg_pinmux_rw_pe_iop___pe4___lsb 4 -#define reg_pinmux_rw_pe_iop___pe4___width 1 -#define reg_pinmux_rw_pe_iop___pe4___bit 4 -#define reg_pinmux_rw_pe_iop___pe5___lsb 5 -#define reg_pinmux_rw_pe_iop___pe5___width 1 -#define reg_pinmux_rw_pe_iop___pe5___bit 5 -#define reg_pinmux_rw_pe_iop___pe6___lsb 6 -#define reg_pinmux_rw_pe_iop___pe6___width 1 -#define reg_pinmux_rw_pe_iop___pe6___bit 6 -#define reg_pinmux_rw_pe_iop___pe7___lsb 7 -#define reg_pinmux_rw_pe_iop___pe7___width 1 -#define reg_pinmux_rw_pe_iop___pe7___bit 7 -#define reg_pinmux_rw_pe_iop___pe8___lsb 8 -#define reg_pinmux_rw_pe_iop___pe8___width 1 -#define reg_pinmux_rw_pe_iop___pe8___bit 8 -#define reg_pinmux_rw_pe_iop___pe9___lsb 9 -#define reg_pinmux_rw_pe_iop___pe9___width 1 -#define reg_pinmux_rw_pe_iop___pe9___bit 9 -#define reg_pinmux_rw_pe_iop___pe10___lsb 10 -#define reg_pinmux_rw_pe_iop___pe10___width 1 -#define reg_pinmux_rw_pe_iop___pe10___bit 10 -#define reg_pinmux_rw_pe_iop___pe11___lsb 11 -#define reg_pinmux_rw_pe_iop___pe11___width 1 -#define reg_pinmux_rw_pe_iop___pe11___bit 11 -#define reg_pinmux_rw_pe_iop___pe12___lsb 12 -#define reg_pinmux_rw_pe_iop___pe12___width 1 -#define reg_pinmux_rw_pe_iop___pe12___bit 12 -#define reg_pinmux_rw_pe_iop___pe13___lsb 13 -#define reg_pinmux_rw_pe_iop___pe13___width 1 -#define reg_pinmux_rw_pe_iop___pe13___bit 13 -#define reg_pinmux_rw_pe_iop___pe14___lsb 14 -#define reg_pinmux_rw_pe_iop___pe14___width 1 -#define reg_pinmux_rw_pe_iop___pe14___bit 14 -#define reg_pinmux_rw_pe_iop___pe15___lsb 15 -#define reg_pinmux_rw_pe_iop___pe15___width 1 -#define reg_pinmux_rw_pe_iop___pe15___bit 15 -#define reg_pinmux_rw_pe_iop___pe16___lsb 16 -#define reg_pinmux_rw_pe_iop___pe16___width 1 -#define reg_pinmux_rw_pe_iop___pe16___bit 16 -#define reg_pinmux_rw_pe_iop___pe17___lsb 17 -#define reg_pinmux_rw_pe_iop___pe17___width 1 -#define reg_pinmux_rw_pe_iop___pe17___bit 17 -#define reg_pinmux_rw_pe_iop_offset 36 - -/* Register rw_usb_phy, scope pinmux, type rw */ -#define reg_pinmux_rw_usb_phy___en_usb0___lsb 0 -#define reg_pinmux_rw_usb_phy___en_usb0___width 1 -#define reg_pinmux_rw_usb_phy___en_usb0___bit 0 -#define reg_pinmux_rw_usb_phy___en_usb1___lsb 1 -#define reg_pinmux_rw_usb_phy___en_usb1___width 1 -#define reg_pinmux_rw_usb_phy___en_usb1___bit 1 -#define reg_pinmux_rw_usb_phy_offset 40 - - -/* Constants */ -#define regk_pinmux_no 0x00000000 -#define regk_pinmux_rw_hwprot_default 0x00000000 -#define regk_pinmux_rw_pa_default 0x00000000 -#define regk_pinmux_rw_pb_gio_default 0x00000000 -#define regk_pinmux_rw_pb_iop_default 0x00000000 -#define regk_pinmux_rw_pc_gio_default 0x00000000 -#define regk_pinmux_rw_pc_iop_default 0x00000000 -#define regk_pinmux_rw_pd_gio_default 0x00000000 -#define regk_pinmux_rw_pd_iop_default 0x00000000 -#define regk_pinmux_rw_pe_gio_default 0x00000000 -#define regk_pinmux_rw_pe_iop_default 0x00000000 -#define regk_pinmux_rw_usb_phy_default 0x00000000 -#define regk_pinmux_yes 0x00000001 -#endif /* __pinmux_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h b/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h deleted file mode 100644 index 76959b70cd2c..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h +++ /dev/null @@ -1,96 +0,0 @@ -#ifndef __reg_map_h -#define __reg_map_h - -/* - * This file is autogenerated from - * file: ../../mod/fakereg.rmap - * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp - * last modified: Wed Feb 11 20:53:25 2004 - * file: ../../rtl/global.rmap - * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp - * last modified: Mon Aug 18 17:08:23 2003 - * file: ../../mod/modreg.rmap - * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp - * last modified: Fri Feb 20 16:40:04 2004 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/reg_map_asm.h -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap - * id: $Id: reg_map_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -#define regi_artpec_mod 0xb7044000 -#define regi_ata 0xb0032000 -#define regi_ata_mod 0xb7006000 -#define regi_barber 0xb701a000 -#define regi_bif_core 0xb0014000 -#define regi_bif_dma 0xb0016000 -#define regi_bif_slave 0xb0018000 -#define regi_bif_slave_ext 0xac000000 -#define regi_bus_master 0xb703c000 -#define regi_config 0xb003c000 -#define regi_dma0 0xb0000000 -#define regi_dma1 0xb0002000 -#define regi_dma2 0xb0004000 -#define regi_dma3 0xb0006000 -#define regi_dma4 0xb0008000 -#define regi_dma5 0xb000a000 -#define regi_dma6 0xb000c000 -#define regi_dma7 0xb000e000 -#define regi_dma8 0xb0010000 -#define regi_dma9 0xb0012000 -#define regi_eth0 0xb0034000 -#define regi_eth1 0xb0036000 -#define regi_eth_mod 0xb7004000 -#define regi_eth_mod1 0xb701c000 -#define regi_eth_strmod 0xb7008000 -#define regi_eth_strmod1 0xb7032000 -#define regi_ext_dma 0xb703a000 -#define regi_ext_mem 0xb7046000 -#define regi_gen_io 0xb7016000 -#define regi_gio 0xb001a000 -#define regi_hook 0xb7000000 -#define regi_iop 0xb0020000 -#define regi_irq 0xb001c000 -#define regi_irq_nmi 0xb701e000 -#define regi_marb 0xb003e000 -#define regi_marb_bp0 0xb003e240 -#define regi_marb_bp1 0xb003e280 -#define regi_marb_bp2 0xb003e2c0 -#define regi_marb_bp3 0xb003e300 -#define regi_nand_mod 0xb7014000 -#define regi_p21 0xb002e000 -#define regi_p21_mod 0xb7042000 -#define regi_pci_mod 0xb7010000 -#define regi_pin_test 0xb7018000 -#define regi_pinmux 0xb0038000 -#define regi_sdram_chk 0xb703e000 -#define regi_sdram_mod 0xb7012000 -#define regi_ser0 0xb0026000 -#define regi_ser1 0xb0028000 -#define regi_ser2 0xb002a000 -#define regi_ser3 0xb002c000 -#define regi_ser_mod0 0xb7020000 -#define regi_ser_mod1 0xb7022000 -#define regi_ser_mod2 0xb7024000 -#define regi_ser_mod3 0xb7026000 -#define regi_smif_stat 0xb700e000 -#define regi_sser0 0xb0022000 -#define regi_sser1 0xb0024000 -#define regi_sser_mod0 0xb700a000 -#define regi_sser_mod1 0xb700c000 -#define regi_strcop 0xb0030000 -#define regi_strmux 0xb003a000 -#define regi_strmux_tst 0xb7040000 -#define regi_tap 0xb7002000 -#define regi_timer 0xb001e000 -#define regi_timer_mod 0xb7034000 -#define regi_trace 0xb0040000 -#define regi_usb0 0xb7028000 -#define regi_usb1 0xb702a000 -#define regi_usb2 0xb702c000 -#define regi_usb3 0xb702e000 -#define regi_usb_dev 0xb7030000 -#define regi_utmi_mod0 0xb7036000 -#define regi_utmi_mod1 0xb7038000 -#endif /* __reg_map_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h deleted file mode 100644 index 10246f49fb28..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef __rt_trace_defs_asm_h -#define __rt_trace_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/rt_trace/rtl/rt_regs.r - * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp - * last modfied: Mon Apr 11 16:09:14 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/rt_trace_defs_asm.h ../../inst/rt_trace/rtl/rt_regs.r - * id: $Id: rt_trace_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope rt_trace, type rw */ -#define reg_rt_trace_rw_cfg___en___lsb 0 -#define reg_rt_trace_rw_cfg___en___width 1 -#define reg_rt_trace_rw_cfg___en___bit 0 -#define reg_rt_trace_rw_cfg___mode___lsb 1 -#define reg_rt_trace_rw_cfg___mode___width 1 -#define reg_rt_trace_rw_cfg___mode___bit 1 -#define reg_rt_trace_rw_cfg___owner___lsb 2 -#define reg_rt_trace_rw_cfg___owner___width 1 -#define reg_rt_trace_rw_cfg___owner___bit 2 -#define reg_rt_trace_rw_cfg___wp___lsb 3 -#define reg_rt_trace_rw_cfg___wp___width 1 -#define reg_rt_trace_rw_cfg___wp___bit 3 -#define reg_rt_trace_rw_cfg___stall___lsb 4 -#define reg_rt_trace_rw_cfg___stall___width 1 -#define reg_rt_trace_rw_cfg___stall___bit 4 -#define reg_rt_trace_rw_cfg___wp_start___lsb 8 -#define reg_rt_trace_rw_cfg___wp_start___width 7 -#define reg_rt_trace_rw_cfg___wp_stop___lsb 16 -#define reg_rt_trace_rw_cfg___wp_stop___width 7 -#define reg_rt_trace_rw_cfg_offset 0 - -/* Register rw_tap_ctrl, scope rt_trace, type rw */ -#define reg_rt_trace_rw_tap_ctrl___ack_data___lsb 0 -#define reg_rt_trace_rw_tap_ctrl___ack_data___width 1 -#define reg_rt_trace_rw_tap_ctrl___ack_data___bit 0 -#define reg_rt_trace_rw_tap_ctrl___ack_guru___lsb 1 -#define reg_rt_trace_rw_tap_ctrl___ack_guru___width 1 -#define reg_rt_trace_rw_tap_ctrl___ack_guru___bit 1 -#define reg_rt_trace_rw_tap_ctrl_offset 4 - -/* Register r_tap_stat, scope rt_trace, type r */ -#define reg_rt_trace_r_tap_stat___dav___lsb 0 -#define reg_rt_trace_r_tap_stat___dav___width 1 -#define reg_rt_trace_r_tap_stat___dav___bit 0 -#define reg_rt_trace_r_tap_stat___empty___lsb 1 -#define reg_rt_trace_r_tap_stat___empty___width 1 -#define reg_rt_trace_r_tap_stat___empty___bit 1 -#define reg_rt_trace_r_tap_stat_offset 8 - -/* Register rw_tap_data, scope rt_trace, type rw */ -#define reg_rt_trace_rw_tap_data_offset 12 - -/* Register rw_tap_hdata, scope rt_trace, type rw */ -#define reg_rt_trace_rw_tap_hdata___op___lsb 0 -#define reg_rt_trace_rw_tap_hdata___op___width 4 -#define reg_rt_trace_rw_tap_hdata___sub_op___lsb 4 -#define reg_rt_trace_rw_tap_hdata___sub_op___width 4 -#define reg_rt_trace_rw_tap_hdata_offset 16 - -/* Register r_redir, scope rt_trace, type r */ -#define reg_rt_trace_r_redir_offset 20 - - -/* Constants */ -#define regk_rt_trace_brk 0x0000000c -#define regk_rt_trace_dbg 0x00000003 -#define regk_rt_trace_dbgdi 0x00000004 -#define regk_rt_trace_dbgdo 0x00000005 -#define regk_rt_trace_gmode 0x00000000 -#define regk_rt_trace_no 0x00000000 -#define regk_rt_trace_nop 0x00000000 -#define regk_rt_trace_normal 0x00000000 -#define regk_rt_trace_rdmem 0x00000007 -#define regk_rt_trace_rdmemb 0x00000009 -#define regk_rt_trace_rdpreg 0x00000002 -#define regk_rt_trace_rdreg 0x00000001 -#define regk_rt_trace_rdsreg 0x00000003 -#define regk_rt_trace_redir 0x00000006 -#define regk_rt_trace_ret 0x0000000b -#define regk_rt_trace_rw_cfg_default 0x00000000 -#define regk_rt_trace_trcfg 0x00000001 -#define regk_rt_trace_wp 0x00000001 -#define regk_rt_trace_wp0 0x00000001 -#define regk_rt_trace_wp1 0x00000002 -#define regk_rt_trace_wp2 0x00000004 -#define regk_rt_trace_wp3 0x00000008 -#define regk_rt_trace_wp4 0x00000010 -#define regk_rt_trace_wp5 0x00000020 -#define regk_rt_trace_wp6 0x00000040 -#define regk_rt_trace_wrmem 0x00000008 -#define regk_rt_trace_wrmemb 0x0000000a -#define regk_rt_trace_wrpreg 0x00000005 -#define regk_rt_trace_wrreg 0x00000004 -#define regk_rt_trace_wrsreg 0x00000006 -#define regk_rt_trace_yes 0x00000001 -#endif /* __rt_trace_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h deleted file mode 100644 index 4a2808bdf390..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h +++ /dev/null @@ -1,359 +0,0 @@ -#ifndef __ser_defs_asm_h -#define __ser_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/ser/rtl/ser_regs.r - * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp - * last modfied: Mon Apr 11 16:09:21 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/ser_defs_asm.h ../../inst/ser/rtl/ser_regs.r - * id: $Id: ser_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_tr_ctrl, scope ser, type rw */ -#define reg_ser_rw_tr_ctrl___base_freq___lsb 0 -#define reg_ser_rw_tr_ctrl___base_freq___width 3 -#define reg_ser_rw_tr_ctrl___en___lsb 3 -#define reg_ser_rw_tr_ctrl___en___width 1 -#define reg_ser_rw_tr_ctrl___en___bit 3 -#define reg_ser_rw_tr_ctrl___par___lsb 4 -#define reg_ser_rw_tr_ctrl___par___width 2 -#define reg_ser_rw_tr_ctrl___par_en___lsb 6 -#define reg_ser_rw_tr_ctrl___par_en___width 1 -#define reg_ser_rw_tr_ctrl___par_en___bit 6 -#define reg_ser_rw_tr_ctrl___data_bits___lsb 7 -#define reg_ser_rw_tr_ctrl___data_bits___width 1 -#define reg_ser_rw_tr_ctrl___data_bits___bit 7 -#define reg_ser_rw_tr_ctrl___stop_bits___lsb 8 -#define reg_ser_rw_tr_ctrl___stop_bits___width 1 -#define reg_ser_rw_tr_ctrl___stop_bits___bit 8 -#define reg_ser_rw_tr_ctrl___stop___lsb 9 -#define reg_ser_rw_tr_ctrl___stop___width 1 -#define reg_ser_rw_tr_ctrl___stop___bit 9 -#define reg_ser_rw_tr_ctrl___rts_delay___lsb 10 -#define reg_ser_rw_tr_ctrl___rts_delay___width 3 -#define reg_ser_rw_tr_ctrl___rts_setup___lsb 13 -#define reg_ser_rw_tr_ctrl___rts_setup___width 1 -#define reg_ser_rw_tr_ctrl___rts_setup___bit 13 -#define reg_ser_rw_tr_ctrl___auto_rts___lsb 14 -#define reg_ser_rw_tr_ctrl___auto_rts___width 1 -#define reg_ser_rw_tr_ctrl___auto_rts___bit 14 -#define reg_ser_rw_tr_ctrl___txd___lsb 15 -#define reg_ser_rw_tr_ctrl___txd___width 1 -#define reg_ser_rw_tr_ctrl___txd___bit 15 -#define reg_ser_rw_tr_ctrl___auto_cts___lsb 16 -#define reg_ser_rw_tr_ctrl___auto_cts___width 1 -#define reg_ser_rw_tr_ctrl___auto_cts___bit 16 -#define reg_ser_rw_tr_ctrl_offset 0 - -/* Register rw_tr_dma_en, scope ser, type rw */ -#define reg_ser_rw_tr_dma_en___en___lsb 0 -#define reg_ser_rw_tr_dma_en___en___width 1 -#define reg_ser_rw_tr_dma_en___en___bit 0 -#define reg_ser_rw_tr_dma_en_offset 4 - -/* Register rw_rec_ctrl, scope ser, type rw */ -#define reg_ser_rw_rec_ctrl___base_freq___lsb 0 -#define reg_ser_rw_rec_ctrl___base_freq___width 3 -#define reg_ser_rw_rec_ctrl___en___lsb 3 -#define reg_ser_rw_rec_ctrl___en___width 1 -#define reg_ser_rw_rec_ctrl___en___bit 3 -#define reg_ser_rw_rec_ctrl___par___lsb 4 -#define reg_ser_rw_rec_ctrl___par___width 2 -#define reg_ser_rw_rec_ctrl___par_en___lsb 6 -#define reg_ser_rw_rec_ctrl___par_en___width 1 -#define reg_ser_rw_rec_ctrl___par_en___bit 6 -#define reg_ser_rw_rec_ctrl___data_bits___lsb 7 -#define reg_ser_rw_rec_ctrl___data_bits___width 1 -#define reg_ser_rw_rec_ctrl___data_bits___bit 7 -#define reg_ser_rw_rec_ctrl___dma_mode___lsb 8 -#define reg_ser_rw_rec_ctrl___dma_mode___width 1 -#define reg_ser_rw_rec_ctrl___dma_mode___bit 8 -#define reg_ser_rw_rec_ctrl___dma_err___lsb 9 -#define reg_ser_rw_rec_ctrl___dma_err___width 1 -#define reg_ser_rw_rec_ctrl___dma_err___bit 9 -#define reg_ser_rw_rec_ctrl___sampling___lsb 10 -#define reg_ser_rw_rec_ctrl___sampling___width 1 -#define reg_ser_rw_rec_ctrl___sampling___bit 10 -#define reg_ser_rw_rec_ctrl___timeout___lsb 11 -#define reg_ser_rw_rec_ctrl___timeout___width 3 -#define reg_ser_rw_rec_ctrl___auto_eop___lsb 14 -#define reg_ser_rw_rec_ctrl___auto_eop___width 1 -#define reg_ser_rw_rec_ctrl___auto_eop___bit 14 -#define reg_ser_rw_rec_ctrl___half_duplex___lsb 15 -#define reg_ser_rw_rec_ctrl___half_duplex___width 1 -#define reg_ser_rw_rec_ctrl___half_duplex___bit 15 -#define reg_ser_rw_rec_ctrl___rts_n___lsb 16 -#define reg_ser_rw_rec_ctrl___rts_n___width 1 -#define reg_ser_rw_rec_ctrl___rts_n___bit 16 -#define reg_ser_rw_rec_ctrl___loopback___lsb 17 -#define reg_ser_rw_rec_ctrl___loopback___width 1 -#define reg_ser_rw_rec_ctrl___loopback___bit 17 -#define reg_ser_rw_rec_ctrl_offset 8 - -/* Register rw_tr_baud_div, scope ser, type rw */ -#define reg_ser_rw_tr_baud_div___div___lsb 0 -#define reg_ser_rw_tr_baud_div___div___width 16 -#define reg_ser_rw_tr_baud_div_offset 12 - -/* Register rw_rec_baud_div, scope ser, type rw */ -#define reg_ser_rw_rec_baud_div___div___lsb 0 -#define reg_ser_rw_rec_baud_div___div___width 16 -#define reg_ser_rw_rec_baud_div_offset 16 - -/* Register rw_xoff, scope ser, type rw */ -#define reg_ser_rw_xoff___chr___lsb 0 -#define reg_ser_rw_xoff___chr___width 8 -#define reg_ser_rw_xoff___automatic___lsb 8 -#define reg_ser_rw_xoff___automatic___width 1 -#define reg_ser_rw_xoff___automatic___bit 8 -#define reg_ser_rw_xoff_offset 20 - -/* Register rw_xoff_clr, scope ser, type rw */ -#define reg_ser_rw_xoff_clr___clr___lsb 0 -#define reg_ser_rw_xoff_clr___clr___width 1 -#define reg_ser_rw_xoff_clr___clr___bit 0 -#define reg_ser_rw_xoff_clr_offset 24 - -/* Register rw_dout, scope ser, type rw */ -#define reg_ser_rw_dout___data___lsb 0 -#define reg_ser_rw_dout___data___width 8 -#define reg_ser_rw_dout_offset 28 - -/* Register rs_stat_din, scope ser, type rs */ -#define reg_ser_rs_stat_din___data___lsb 0 -#define reg_ser_rs_stat_din___data___width 8 -#define reg_ser_rs_stat_din___dav___lsb 16 -#define reg_ser_rs_stat_din___dav___width 1 -#define reg_ser_rs_stat_din___dav___bit 16 -#define reg_ser_rs_stat_din___framing_err___lsb 17 -#define reg_ser_rs_stat_din___framing_err___width 1 -#define reg_ser_rs_stat_din___framing_err___bit 17 -#define reg_ser_rs_stat_din___par_err___lsb 18 -#define reg_ser_rs_stat_din___par_err___width 1 -#define reg_ser_rs_stat_din___par_err___bit 18 -#define reg_ser_rs_stat_din___orun___lsb 19 -#define reg_ser_rs_stat_din___orun___width 1 -#define reg_ser_rs_stat_din___orun___bit 19 -#define reg_ser_rs_stat_din___rec_err___lsb 20 -#define reg_ser_rs_stat_din___rec_err___width 1 -#define reg_ser_rs_stat_din___rec_err___bit 20 -#define reg_ser_rs_stat_din___rxd___lsb 21 -#define reg_ser_rs_stat_din___rxd___width 1 -#define reg_ser_rs_stat_din___rxd___bit 21 -#define reg_ser_rs_stat_din___tr_idle___lsb 22 -#define reg_ser_rs_stat_din___tr_idle___width 1 -#define reg_ser_rs_stat_din___tr_idle___bit 22 -#define reg_ser_rs_stat_din___tr_empty___lsb 23 -#define reg_ser_rs_stat_din___tr_empty___width 1 -#define reg_ser_rs_stat_din___tr_empty___bit 23 -#define reg_ser_rs_stat_din___tr_rdy___lsb 24 -#define reg_ser_rs_stat_din___tr_rdy___width 1 -#define reg_ser_rs_stat_din___tr_rdy___bit 24 -#define reg_ser_rs_stat_din___cts_n___lsb 25 -#define reg_ser_rs_stat_din___cts_n___width 1 -#define reg_ser_rs_stat_din___cts_n___bit 25 -#define reg_ser_rs_stat_din___xoff_detect___lsb 26 -#define reg_ser_rs_stat_din___xoff_detect___width 1 -#define reg_ser_rs_stat_din___xoff_detect___bit 26 -#define reg_ser_rs_stat_din___rts_n___lsb 27 -#define reg_ser_rs_stat_din___rts_n___width 1 -#define reg_ser_rs_stat_din___rts_n___bit 27 -#define reg_ser_rs_stat_din___txd___lsb 28 -#define reg_ser_rs_stat_din___txd___width 1 -#define reg_ser_rs_stat_din___txd___bit 28 -#define reg_ser_rs_stat_din_offset 32 - -/* Register r_stat_din, scope ser, type r */ -#define reg_ser_r_stat_din___data___lsb 0 -#define reg_ser_r_stat_din___data___width 8 -#define reg_ser_r_stat_din___dav___lsb 16 -#define reg_ser_r_stat_din___dav___width 1 -#define reg_ser_r_stat_din___dav___bit 16 -#define reg_ser_r_stat_din___framing_err___lsb 17 -#define reg_ser_r_stat_din___framing_err___width 1 -#define reg_ser_r_stat_din___framing_err___bit 17 -#define reg_ser_r_stat_din___par_err___lsb 18 -#define reg_ser_r_stat_din___par_err___width 1 -#define reg_ser_r_stat_din___par_err___bit 18 -#define reg_ser_r_stat_din___orun___lsb 19 -#define reg_ser_r_stat_din___orun___width 1 -#define reg_ser_r_stat_din___orun___bit 19 -#define reg_ser_r_stat_din___rec_err___lsb 20 -#define reg_ser_r_stat_din___rec_err___width 1 -#define reg_ser_r_stat_din___rec_err___bit 20 -#define reg_ser_r_stat_din___rxd___lsb 21 -#define reg_ser_r_stat_din___rxd___width 1 -#define reg_ser_r_stat_din___rxd___bit 21 -#define reg_ser_r_stat_din___tr_idle___lsb 22 -#define reg_ser_r_stat_din___tr_idle___width 1 -#define reg_ser_r_stat_din___tr_idle___bit 22 -#define reg_ser_r_stat_din___tr_empty___lsb 23 -#define reg_ser_r_stat_din___tr_empty___width 1 -#define reg_ser_r_stat_din___tr_empty___bit 23 -#define reg_ser_r_stat_din___tr_rdy___lsb 24 -#define reg_ser_r_stat_din___tr_rdy___width 1 -#define reg_ser_r_stat_din___tr_rdy___bit 24 -#define reg_ser_r_stat_din___cts_n___lsb 25 -#define reg_ser_r_stat_din___cts_n___width 1 -#define reg_ser_r_stat_din___cts_n___bit 25 -#define reg_ser_r_stat_din___xoff_detect___lsb 26 -#define reg_ser_r_stat_din___xoff_detect___width 1 -#define reg_ser_r_stat_din___xoff_detect___bit 26 -#define reg_ser_r_stat_din___rts_n___lsb 27 -#define reg_ser_r_stat_din___rts_n___width 1 -#define reg_ser_r_stat_din___rts_n___bit 27 -#define reg_ser_r_stat_din___txd___lsb 28 -#define reg_ser_r_stat_din___txd___width 1 -#define reg_ser_r_stat_din___txd___bit 28 -#define reg_ser_r_stat_din_offset 36 - -/* Register rw_rec_eop, scope ser, type rw */ -#define reg_ser_rw_rec_eop___set___lsb 0 -#define reg_ser_rw_rec_eop___set___width 1 -#define reg_ser_rw_rec_eop___set___bit 0 -#define reg_ser_rw_rec_eop_offset 40 - -/* Register rw_intr_mask, scope ser, type rw */ -#define reg_ser_rw_intr_mask___tr_rdy___lsb 0 -#define reg_ser_rw_intr_mask___tr_rdy___width 1 -#define reg_ser_rw_intr_mask___tr_rdy___bit 0 -#define reg_ser_rw_intr_mask___tr_empty___lsb 1 -#define reg_ser_rw_intr_mask___tr_empty___width 1 -#define reg_ser_rw_intr_mask___tr_empty___bit 1 -#define reg_ser_rw_intr_mask___tr_idle___lsb 2 -#define reg_ser_rw_intr_mask___tr_idle___width 1 -#define reg_ser_rw_intr_mask___tr_idle___bit 2 -#define reg_ser_rw_intr_mask___dav___lsb 3 -#define reg_ser_rw_intr_mask___dav___width 1 -#define reg_ser_rw_intr_mask___dav___bit 3 -#define reg_ser_rw_intr_mask_offset 44 - -/* Register rw_ack_intr, scope ser, type rw */ -#define reg_ser_rw_ack_intr___tr_rdy___lsb 0 -#define reg_ser_rw_ack_intr___tr_rdy___width 1 -#define reg_ser_rw_ack_intr___tr_rdy___bit 0 -#define reg_ser_rw_ack_intr___tr_empty___lsb 1 -#define reg_ser_rw_ack_intr___tr_empty___width 1 -#define reg_ser_rw_ack_intr___tr_empty___bit 1 -#define reg_ser_rw_ack_intr___tr_idle___lsb 2 -#define reg_ser_rw_ack_intr___tr_idle___width 1 -#define reg_ser_rw_ack_intr___tr_idle___bit 2 -#define reg_ser_rw_ack_intr___dav___lsb 3 -#define reg_ser_rw_ack_intr___dav___width 1 -#define reg_ser_rw_ack_intr___dav___bit 3 -#define reg_ser_rw_ack_intr_offset 48 - -/* Register r_intr, scope ser, type r */ -#define reg_ser_r_intr___tr_rdy___lsb 0 -#define reg_ser_r_intr___tr_rdy___width 1 -#define reg_ser_r_intr___tr_rdy___bit 0 -#define reg_ser_r_intr___tr_empty___lsb 1 -#define reg_ser_r_intr___tr_empty___width 1 -#define reg_ser_r_intr___tr_empty___bit 1 -#define reg_ser_r_intr___tr_idle___lsb 2 -#define reg_ser_r_intr___tr_idle___width 1 -#define reg_ser_r_intr___tr_idle___bit 2 -#define reg_ser_r_intr___dav___lsb 3 -#define reg_ser_r_intr___dav___width 1 -#define reg_ser_r_intr___dav___bit 3 -#define reg_ser_r_intr_offset 52 - -/* Register r_masked_intr, scope ser, type r */ -#define reg_ser_r_masked_intr___tr_rdy___lsb 0 -#define reg_ser_r_masked_intr___tr_rdy___width 1 -#define reg_ser_r_masked_intr___tr_rdy___bit 0 -#define reg_ser_r_masked_intr___tr_empty___lsb 1 -#define reg_ser_r_masked_intr___tr_empty___width 1 -#define reg_ser_r_masked_intr___tr_empty___bit 1 -#define reg_ser_r_masked_intr___tr_idle___lsb 2 -#define reg_ser_r_masked_intr___tr_idle___width 1 -#define reg_ser_r_masked_intr___tr_idle___bit 2 -#define reg_ser_r_masked_intr___dav___lsb 3 -#define reg_ser_r_masked_intr___dav___width 1 -#define reg_ser_r_masked_intr___dav___bit 3 -#define reg_ser_r_masked_intr_offset 56 - - -/* Constants */ -#define regk_ser_active 0x00000000 -#define regk_ser_bits1 0x00000000 -#define regk_ser_bits2 0x00000001 -#define regk_ser_bits7 0x00000001 -#define regk_ser_bits8 0x00000000 -#define regk_ser_del0_5 0x00000000 -#define regk_ser_del1 0x00000001 -#define regk_ser_del1_5 0x00000002 -#define regk_ser_del2 0x00000003 -#define regk_ser_del2_5 0x00000004 -#define regk_ser_del3 0x00000005 -#define regk_ser_del3_5 0x00000006 -#define regk_ser_del4 0x00000007 -#define regk_ser_even 0x00000000 -#define regk_ser_ext 0x00000001 -#define regk_ser_f100 0x00000007 -#define regk_ser_f29_493 0x00000004 -#define regk_ser_f32 0x00000005 -#define regk_ser_f32_768 0x00000006 -#define regk_ser_ignore 0x00000001 -#define regk_ser_inactive 0x00000001 -#define regk_ser_majority 0x00000001 -#define regk_ser_mark 0x00000002 -#define regk_ser_middle 0x00000000 -#define regk_ser_no 0x00000000 -#define regk_ser_odd 0x00000001 -#define regk_ser_off 0x00000000 -#define regk_ser_rw_intr_mask_default 0x00000000 -#define regk_ser_rw_rec_baud_div_default 0x00000000 -#define regk_ser_rw_rec_ctrl_default 0x00010000 -#define regk_ser_rw_tr_baud_div_default 0x00000000 -#define regk_ser_rw_tr_ctrl_default 0x00008000 -#define regk_ser_rw_tr_dma_en_default 0x00000000 -#define regk_ser_rw_xoff_default 0x00000000 -#define regk_ser_space 0x00000003 -#define regk_ser_stop 0x00000000 -#define regk_ser_yes 0x00000001 -#endif /* __ser_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h deleted file mode 100644 index 27d4d91b3abd..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h +++ /dev/null @@ -1,462 +0,0 @@ -#ifndef __sser_defs_asm_h -#define __sser_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/syncser/rtl/sser_regs.r - * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp - * last modfied: Mon Apr 11 16:09:48 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/sser_defs_asm.h ../../inst/syncser/rtl/sser_regs.r - * id: $Id: sser_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope sser, type rw */ -#define reg_sser_rw_cfg___clk_div___lsb 0 -#define reg_sser_rw_cfg___clk_div___width 16 -#define reg_sser_rw_cfg___base_freq___lsb 16 -#define reg_sser_rw_cfg___base_freq___width 3 -#define reg_sser_rw_cfg___gate_clk___lsb 19 -#define reg_sser_rw_cfg___gate_clk___width 1 -#define reg_sser_rw_cfg___gate_clk___bit 19 -#define reg_sser_rw_cfg___clkgate_ctrl___lsb 20 -#define reg_sser_rw_cfg___clkgate_ctrl___width 1 -#define reg_sser_rw_cfg___clkgate_ctrl___bit 20 -#define reg_sser_rw_cfg___clkgate_in___lsb 21 -#define reg_sser_rw_cfg___clkgate_in___width 1 -#define reg_sser_rw_cfg___clkgate_in___bit 21 -#define reg_sser_rw_cfg___clk_dir___lsb 22 -#define reg_sser_rw_cfg___clk_dir___width 1 -#define reg_sser_rw_cfg___clk_dir___bit 22 -#define reg_sser_rw_cfg___clk_od_mode___lsb 23 -#define reg_sser_rw_cfg___clk_od_mode___width 1 -#define reg_sser_rw_cfg___clk_od_mode___bit 23 -#define reg_sser_rw_cfg___out_clk_pol___lsb 24 -#define reg_sser_rw_cfg___out_clk_pol___width 1 -#define reg_sser_rw_cfg___out_clk_pol___bit 24 -#define reg_sser_rw_cfg___out_clk_src___lsb 25 -#define reg_sser_rw_cfg___out_clk_src___width 2 -#define reg_sser_rw_cfg___clk_in_sel___lsb 27 -#define reg_sser_rw_cfg___clk_in_sel___width 1 -#define reg_sser_rw_cfg___clk_in_sel___bit 27 -#define reg_sser_rw_cfg___hold_pol___lsb 28 -#define reg_sser_rw_cfg___hold_pol___width 1 -#define reg_sser_rw_cfg___hold_pol___bit 28 -#define reg_sser_rw_cfg___prepare___lsb 29 -#define reg_sser_rw_cfg___prepare___width 1 -#define reg_sser_rw_cfg___prepare___bit 29 -#define reg_sser_rw_cfg___en___lsb 30 -#define reg_sser_rw_cfg___en___width 1 -#define reg_sser_rw_cfg___en___bit 30 -#define reg_sser_rw_cfg_offset 0 - -/* Register rw_frm_cfg, scope sser, type rw */ -#define reg_sser_rw_frm_cfg___wordrate___lsb 0 -#define reg_sser_rw_frm_cfg___wordrate___width 10 -#define reg_sser_rw_frm_cfg___rec_delay___lsb 10 -#define reg_sser_rw_frm_cfg___rec_delay___width 3 -#define reg_sser_rw_frm_cfg___tr_delay___lsb 13 -#define reg_sser_rw_frm_cfg___tr_delay___width 3 -#define reg_sser_rw_frm_cfg___early_wend___lsb 16 -#define reg_sser_rw_frm_cfg___early_wend___width 1 -#define reg_sser_rw_frm_cfg___early_wend___bit 16 -#define reg_sser_rw_frm_cfg___level___lsb 17 -#define reg_sser_rw_frm_cfg___level___width 2 -#define reg_sser_rw_frm_cfg___type___lsb 19 -#define reg_sser_rw_frm_cfg___type___width 1 -#define reg_sser_rw_frm_cfg___type___bit 19 -#define reg_sser_rw_frm_cfg___clk_pol___lsb 20 -#define reg_sser_rw_frm_cfg___clk_pol___width 1 -#define reg_sser_rw_frm_cfg___clk_pol___bit 20 -#define reg_sser_rw_frm_cfg___fr_in_rxclk___lsb 21 -#define reg_sser_rw_frm_cfg___fr_in_rxclk___width 1 -#define reg_sser_rw_frm_cfg___fr_in_rxclk___bit 21 -#define reg_sser_rw_frm_cfg___clk_src___lsb 22 -#define reg_sser_rw_frm_cfg___clk_src___width 1 -#define reg_sser_rw_frm_cfg___clk_src___bit 22 -#define reg_sser_rw_frm_cfg___out_off___lsb 23 -#define reg_sser_rw_frm_cfg___out_off___width 1 -#define reg_sser_rw_frm_cfg___out_off___bit 23 -#define reg_sser_rw_frm_cfg___out_on___lsb 24 -#define reg_sser_rw_frm_cfg___out_on___width 1 -#define reg_sser_rw_frm_cfg___out_on___bit 24 -#define reg_sser_rw_frm_cfg___frame_pin_dir___lsb 25 -#define reg_sser_rw_frm_cfg___frame_pin_dir___width 1 -#define reg_sser_rw_frm_cfg___frame_pin_dir___bit 25 -#define reg_sser_rw_frm_cfg___frame_pin_use___lsb 26 -#define reg_sser_rw_frm_cfg___frame_pin_use___width 2 -#define reg_sser_rw_frm_cfg___status_pin_dir___lsb 28 -#define reg_sser_rw_frm_cfg___status_pin_dir___width 1 -#define reg_sser_rw_frm_cfg___status_pin_dir___bit 28 -#define reg_sser_rw_frm_cfg___status_pin_use___lsb 29 -#define reg_sser_rw_frm_cfg___status_pin_use___width 2 -#define reg_sser_rw_frm_cfg_offset 4 - -/* Register rw_tr_cfg, scope sser, type rw */ -#define reg_sser_rw_tr_cfg___tr_en___lsb 0 -#define reg_sser_rw_tr_cfg___tr_en___width 1 -#define reg_sser_rw_tr_cfg___tr_en___bit 0 -#define reg_sser_rw_tr_cfg___stop___lsb 1 -#define reg_sser_rw_tr_cfg___stop___width 1 -#define reg_sser_rw_tr_cfg___stop___bit 1 -#define reg_sser_rw_tr_cfg___urun_stop___lsb 2 -#define reg_sser_rw_tr_cfg___urun_stop___width 1 -#define reg_sser_rw_tr_cfg___urun_stop___bit 2 -#define reg_sser_rw_tr_cfg___eop_stop___lsb 3 -#define reg_sser_rw_tr_cfg___eop_stop___width 1 -#define reg_sser_rw_tr_cfg___eop_stop___bit 3 -#define reg_sser_rw_tr_cfg___sample_size___lsb 4 -#define reg_sser_rw_tr_cfg___sample_size___width 6 -#define reg_sser_rw_tr_cfg___sh_dir___lsb 10 -#define reg_sser_rw_tr_cfg___sh_dir___width 1 -#define reg_sser_rw_tr_cfg___sh_dir___bit 10 -#define reg_sser_rw_tr_cfg___clk_pol___lsb 11 -#define reg_sser_rw_tr_cfg___clk_pol___width 1 -#define reg_sser_rw_tr_cfg___clk_pol___bit 11 -#define reg_sser_rw_tr_cfg___clk_src___lsb 12 -#define reg_sser_rw_tr_cfg___clk_src___width 1 -#define reg_sser_rw_tr_cfg___clk_src___bit 12 -#define reg_sser_rw_tr_cfg___use_dma___lsb 13 -#define reg_sser_rw_tr_cfg___use_dma___width 1 -#define reg_sser_rw_tr_cfg___use_dma___bit 13 -#define reg_sser_rw_tr_cfg___mode___lsb 14 -#define reg_sser_rw_tr_cfg___mode___width 2 -#define reg_sser_rw_tr_cfg___frm_src___lsb 16 -#define reg_sser_rw_tr_cfg___frm_src___width 1 -#define reg_sser_rw_tr_cfg___frm_src___bit 16 -#define reg_sser_rw_tr_cfg___use60958___lsb 17 -#define reg_sser_rw_tr_cfg___use60958___width 1 -#define reg_sser_rw_tr_cfg___use60958___bit 17 -#define reg_sser_rw_tr_cfg___iec60958_ckdiv___lsb 18 -#define reg_sser_rw_tr_cfg___iec60958_ckdiv___width 2 -#define reg_sser_rw_tr_cfg___rate_ctrl___lsb 20 -#define reg_sser_rw_tr_cfg___rate_ctrl___width 1 -#define reg_sser_rw_tr_cfg___rate_ctrl___bit 20 -#define reg_sser_rw_tr_cfg___use_md___lsb 21 -#define reg_sser_rw_tr_cfg___use_md___width 1 -#define reg_sser_rw_tr_cfg___use_md___bit 21 -#define reg_sser_rw_tr_cfg___dual_i2s___lsb 22 -#define reg_sser_rw_tr_cfg___dual_i2s___width 1 -#define reg_sser_rw_tr_cfg___dual_i2s___bit 22 -#define reg_sser_rw_tr_cfg___data_pin_use___lsb 23 -#define reg_sser_rw_tr_cfg___data_pin_use___width 2 -#define reg_sser_rw_tr_cfg___od_mode___lsb 25 -#define reg_sser_rw_tr_cfg___od_mode___width 1 -#define reg_sser_rw_tr_cfg___od_mode___bit 25 -#define reg_sser_rw_tr_cfg___bulk_wspace___lsb 26 -#define reg_sser_rw_tr_cfg___bulk_wspace___width 2 -#define reg_sser_rw_tr_cfg_offset 8 - -/* Register rw_rec_cfg, scope sser, type rw */ -#define reg_sser_rw_rec_cfg___rec_en___lsb 0 -#define reg_sser_rw_rec_cfg___rec_en___width 1 -#define reg_sser_rw_rec_cfg___rec_en___bit 0 -#define reg_sser_rw_rec_cfg___force_eop___lsb 1 -#define reg_sser_rw_rec_cfg___force_eop___width 1 -#define reg_sser_rw_rec_cfg___force_eop___bit 1 -#define reg_sser_rw_rec_cfg___stop___lsb 2 -#define reg_sser_rw_rec_cfg___stop___width 1 -#define reg_sser_rw_rec_cfg___stop___bit 2 -#define reg_sser_rw_rec_cfg___orun_stop___lsb 3 -#define reg_sser_rw_rec_cfg___orun_stop___width 1 -#define reg_sser_rw_rec_cfg___orun_stop___bit 3 -#define reg_sser_rw_rec_cfg___eop_stop___lsb 4 -#define reg_sser_rw_rec_cfg___eop_stop___width 1 -#define reg_sser_rw_rec_cfg___eop_stop___bit 4 -#define reg_sser_rw_rec_cfg___sample_size___lsb 5 -#define reg_sser_rw_rec_cfg___sample_size___width 6 -#define reg_sser_rw_rec_cfg___sh_dir___lsb 11 -#define reg_sser_rw_rec_cfg___sh_dir___width 1 -#define reg_sser_rw_rec_cfg___sh_dir___bit 11 -#define reg_sser_rw_rec_cfg___clk_pol___lsb 12 -#define reg_sser_rw_rec_cfg___clk_pol___width 1 -#define reg_sser_rw_rec_cfg___clk_pol___bit 12 -#define reg_sser_rw_rec_cfg___clk_src___lsb 13 -#define reg_sser_rw_rec_cfg___clk_src___width 1 -#define reg_sser_rw_rec_cfg___clk_src___bit 13 -#define reg_sser_rw_rec_cfg___use_dma___lsb 14 -#define reg_sser_rw_rec_cfg___use_dma___width 1 -#define reg_sser_rw_rec_cfg___use_dma___bit 14 -#define reg_sser_rw_rec_cfg___mode___lsb 15 -#define reg_sser_rw_rec_cfg___mode___width 2 -#define reg_sser_rw_rec_cfg___frm_src___lsb 17 -#define reg_sser_rw_rec_cfg___frm_src___width 2 -#define reg_sser_rw_rec_cfg___use60958___lsb 19 -#define reg_sser_rw_rec_cfg___use60958___width 1 -#define reg_sser_rw_rec_cfg___use60958___bit 19 -#define reg_sser_rw_rec_cfg___iec60958_ui_len___lsb 20 -#define reg_sser_rw_rec_cfg___iec60958_ui_len___width 5 -#define reg_sser_rw_rec_cfg___slave2_en___lsb 25 -#define reg_sser_rw_rec_cfg___slave2_en___width 1 -#define reg_sser_rw_rec_cfg___slave2_en___bit 25 -#define reg_sser_rw_rec_cfg___slave3_en___lsb 26 -#define reg_sser_rw_rec_cfg___slave3_en___width 1 -#define reg_sser_rw_rec_cfg___slave3_en___bit 26 -#define reg_sser_rw_rec_cfg___fifo_thr___lsb 27 -#define reg_sser_rw_rec_cfg___fifo_thr___width 2 -#define reg_sser_rw_rec_cfg_offset 12 - -/* Register rw_tr_data, scope sser, type rw */ -#define reg_sser_rw_tr_data___data___lsb 0 -#define reg_sser_rw_tr_data___data___width 16 -#define reg_sser_rw_tr_data___md___lsb 16 -#define reg_sser_rw_tr_data___md___width 1 -#define reg_sser_rw_tr_data___md___bit 16 -#define reg_sser_rw_tr_data_offset 16 - -/* Register r_rec_data, scope sser, type r */ -#define reg_sser_r_rec_data___data___lsb 0 -#define reg_sser_r_rec_data___data___width 16 -#define reg_sser_r_rec_data___md___lsb 16 -#define reg_sser_r_rec_data___md___width 1 -#define reg_sser_r_rec_data___md___bit 16 -#define reg_sser_r_rec_data___ext_clk___lsb 17 -#define reg_sser_r_rec_data___ext_clk___width 1 -#define reg_sser_r_rec_data___ext_clk___bit 17 -#define reg_sser_r_rec_data___status_in___lsb 18 -#define reg_sser_r_rec_data___status_in___width 1 -#define reg_sser_r_rec_data___status_in___bit 18 -#define reg_sser_r_rec_data___frame_in___lsb 19 -#define reg_sser_r_rec_data___frame_in___width 1 -#define reg_sser_r_rec_data___frame_in___bit 19 -#define reg_sser_r_rec_data___din___lsb 20 -#define reg_sser_r_rec_data___din___width 1 -#define reg_sser_r_rec_data___din___bit 20 -#define reg_sser_r_rec_data___data_in___lsb 21 -#define reg_sser_r_rec_data___data_in___width 1 -#define reg_sser_r_rec_data___data_in___bit 21 -#define reg_sser_r_rec_data___clk_in___lsb 22 -#define reg_sser_r_rec_data___clk_in___width 1 -#define reg_sser_r_rec_data___clk_in___bit 22 -#define reg_sser_r_rec_data_offset 20 - -/* Register rw_extra, scope sser, type rw */ -#define reg_sser_rw_extra___clkoff_cycles___lsb 0 -#define reg_sser_rw_extra___clkoff_cycles___width 20 -#define reg_sser_rw_extra___clkoff_en___lsb 20 -#define reg_sser_rw_extra___clkoff_en___width 1 -#define reg_sser_rw_extra___clkoff_en___bit 20 -#define reg_sser_rw_extra___clkon_en___lsb 21 -#define reg_sser_rw_extra___clkon_en___width 1 -#define reg_sser_rw_extra___clkon_en___bit 21 -#define reg_sser_rw_extra___dout_delay___lsb 22 -#define reg_sser_rw_extra___dout_delay___width 5 -#define reg_sser_rw_extra_offset 24 - -/* Register rw_intr_mask, scope sser, type rw */ -#define reg_sser_rw_intr_mask___trdy___lsb 0 -#define reg_sser_rw_intr_mask___trdy___width 1 -#define reg_sser_rw_intr_mask___trdy___bit 0 -#define reg_sser_rw_intr_mask___rdav___lsb 1 -#define reg_sser_rw_intr_mask___rdav___width 1 -#define reg_sser_rw_intr_mask___rdav___bit 1 -#define reg_sser_rw_intr_mask___tidle___lsb 2 -#define reg_sser_rw_intr_mask___tidle___width 1 -#define reg_sser_rw_intr_mask___tidle___bit 2 -#define reg_sser_rw_intr_mask___rstop___lsb 3 -#define reg_sser_rw_intr_mask___rstop___width 1 -#define reg_sser_rw_intr_mask___rstop___bit 3 -#define reg_sser_rw_intr_mask___urun___lsb 4 -#define reg_sser_rw_intr_mask___urun___width 1 -#define reg_sser_rw_intr_mask___urun___bit 4 -#define reg_sser_rw_intr_mask___orun___lsb 5 -#define reg_sser_rw_intr_mask___orun___width 1 -#define reg_sser_rw_intr_mask___orun___bit 5 -#define reg_sser_rw_intr_mask___md_rec___lsb 6 -#define reg_sser_rw_intr_mask___md_rec___width 1 -#define reg_sser_rw_intr_mask___md_rec___bit 6 -#define reg_sser_rw_intr_mask___md_sent___lsb 7 -#define reg_sser_rw_intr_mask___md_sent___width 1 -#define reg_sser_rw_intr_mask___md_sent___bit 7 -#define reg_sser_rw_intr_mask___r958err___lsb 8 -#define reg_sser_rw_intr_mask___r958err___width 1 -#define reg_sser_rw_intr_mask___r958err___bit 8 -#define reg_sser_rw_intr_mask_offset 28 - -/* Register rw_ack_intr, scope sser, type rw */ -#define reg_sser_rw_ack_intr___trdy___lsb 0 -#define reg_sser_rw_ack_intr___trdy___width 1 -#define reg_sser_rw_ack_intr___trdy___bit 0 -#define reg_sser_rw_ack_intr___rdav___lsb 1 -#define reg_sser_rw_ack_intr___rdav___width 1 -#define reg_sser_rw_ack_intr___rdav___bit 1 -#define reg_sser_rw_ack_intr___tidle___lsb 2 -#define reg_sser_rw_ack_intr___tidle___width 1 -#define reg_sser_rw_ack_intr___tidle___bit 2 -#define reg_sser_rw_ack_intr___rstop___lsb 3 -#define reg_sser_rw_ack_intr___rstop___width 1 -#define reg_sser_rw_ack_intr___rstop___bit 3 -#define reg_sser_rw_ack_intr___urun___lsb 4 -#define reg_sser_rw_ack_intr___urun___width 1 -#define reg_sser_rw_ack_intr___urun___bit 4 -#define reg_sser_rw_ack_intr___orun___lsb 5 -#define reg_sser_rw_ack_intr___orun___width 1 -#define reg_sser_rw_ack_intr___orun___bit 5 -#define reg_sser_rw_ack_intr___md_rec___lsb 6 -#define reg_sser_rw_ack_intr___md_rec___width 1 -#define reg_sser_rw_ack_intr___md_rec___bit 6 -#define reg_sser_rw_ack_intr___md_sent___lsb 7 -#define reg_sser_rw_ack_intr___md_sent___width 1 -#define reg_sser_rw_ack_intr___md_sent___bit 7 -#define reg_sser_rw_ack_intr___r958err___lsb 8 -#define reg_sser_rw_ack_intr___r958err___width 1 -#define reg_sser_rw_ack_intr___r958err___bit 8 -#define reg_sser_rw_ack_intr_offset 32 - -/* Register r_intr, scope sser, type r */ -#define reg_sser_r_intr___trdy___lsb 0 -#define reg_sser_r_intr___trdy___width 1 -#define reg_sser_r_intr___trdy___bit 0 -#define reg_sser_r_intr___rdav___lsb 1 -#define reg_sser_r_intr___rdav___width 1 -#define reg_sser_r_intr___rdav___bit 1 -#define reg_sser_r_intr___tidle___lsb 2 -#define reg_sser_r_intr___tidle___width 1 -#define reg_sser_r_intr___tidle___bit 2 -#define reg_sser_r_intr___rstop___lsb 3 -#define reg_sser_r_intr___rstop___width 1 -#define reg_sser_r_intr___rstop___bit 3 -#define reg_sser_r_intr___urun___lsb 4 -#define reg_sser_r_intr___urun___width 1 -#define reg_sser_r_intr___urun___bit 4 -#define reg_sser_r_intr___orun___lsb 5 -#define reg_sser_r_intr___orun___width 1 -#define reg_sser_r_intr___orun___bit 5 -#define reg_sser_r_intr___md_rec___lsb 6 -#define reg_sser_r_intr___md_rec___width 1 -#define reg_sser_r_intr___md_rec___bit 6 -#define reg_sser_r_intr___md_sent___lsb 7 -#define reg_sser_r_intr___md_sent___width 1 -#define reg_sser_r_intr___md_sent___bit 7 -#define reg_sser_r_intr___r958err___lsb 8 -#define reg_sser_r_intr___r958err___width 1 -#define reg_sser_r_intr___r958err___bit 8 -#define reg_sser_r_intr_offset 36 - -/* Register r_masked_intr, scope sser, type r */ -#define reg_sser_r_masked_intr___trdy___lsb 0 -#define reg_sser_r_masked_intr___trdy___width 1 -#define reg_sser_r_masked_intr___trdy___bit 0 -#define reg_sser_r_masked_intr___rdav___lsb 1 -#define reg_sser_r_masked_intr___rdav___width 1 -#define reg_sser_r_masked_intr___rdav___bit 1 -#define reg_sser_r_masked_intr___tidle___lsb 2 -#define reg_sser_r_masked_intr___tidle___width 1 -#define reg_sser_r_masked_intr___tidle___bit 2 -#define reg_sser_r_masked_intr___rstop___lsb 3 -#define reg_sser_r_masked_intr___rstop___width 1 -#define reg_sser_r_masked_intr___rstop___bit 3 -#define reg_sser_r_masked_intr___urun___lsb 4 -#define reg_sser_r_masked_intr___urun___width 1 -#define reg_sser_r_masked_intr___urun___bit 4 -#define reg_sser_r_masked_intr___orun___lsb 5 -#define reg_sser_r_masked_intr___orun___width 1 -#define reg_sser_r_masked_intr___orun___bit 5 -#define reg_sser_r_masked_intr___md_rec___lsb 6 -#define reg_sser_r_masked_intr___md_rec___width 1 -#define reg_sser_r_masked_intr___md_rec___bit 6 -#define reg_sser_r_masked_intr___md_sent___lsb 7 -#define reg_sser_r_masked_intr___md_sent___width 1 -#define reg_sser_r_masked_intr___md_sent___bit 7 -#define reg_sser_r_masked_intr___r958err___lsb 8 -#define reg_sser_r_masked_intr___r958err___width 1 -#define reg_sser_r_masked_intr___r958err___bit 8 -#define reg_sser_r_masked_intr_offset 40 - - -/* Constants */ -#define regk_sser_both 0x00000002 -#define regk_sser_bulk 0x00000001 -#define regk_sser_clk100 0x00000000 -#define regk_sser_clk_in 0x00000000 -#define regk_sser_const0 0x00000003 -#define regk_sser_dout 0x00000002 -#define regk_sser_edge 0x00000000 -#define regk_sser_ext 0x00000001 -#define regk_sser_ext_clk 0x00000001 -#define regk_sser_f100 0x00000000 -#define regk_sser_f29_493 0x00000004 -#define regk_sser_f32 0x00000005 -#define regk_sser_f32_768 0x00000006 -#define regk_sser_frm 0x00000003 -#define regk_sser_gio0 0x00000000 -#define regk_sser_gio1 0x00000001 -#define regk_sser_hispeed 0x00000001 -#define regk_sser_hold 0x00000002 -#define regk_sser_in 0x00000000 -#define regk_sser_inf 0x00000003 -#define regk_sser_intern 0x00000000 -#define regk_sser_intern_clk 0x00000001 -#define regk_sser_intern_tb 0x00000000 -#define regk_sser_iso 0x00000000 -#define regk_sser_level 0x00000001 -#define regk_sser_lospeed 0x00000000 -#define regk_sser_lsbfirst 0x00000000 -#define regk_sser_msbfirst 0x00000001 -#define regk_sser_neg 0x00000001 -#define regk_sser_neg_lo 0x00000000 -#define regk_sser_no 0x00000000 -#define regk_sser_no_clk 0x00000007 -#define regk_sser_nojitter 0x00000002 -#define regk_sser_out 0x00000001 -#define regk_sser_pos 0x00000000 -#define regk_sser_pos_hi 0x00000001 -#define regk_sser_rec 0x00000000 -#define regk_sser_rw_cfg_default 0x00000000 -#define regk_sser_rw_extra_default 0x00000000 -#define regk_sser_rw_frm_cfg_default 0x00000000 -#define regk_sser_rw_intr_mask_default 0x00000000 -#define regk_sser_rw_rec_cfg_default 0x00000000 -#define regk_sser_rw_tr_cfg_default 0x01800000 -#define regk_sser_rw_tr_data_default 0x00000000 -#define regk_sser_thr16 0x00000001 -#define regk_sser_thr32 0x00000002 -#define regk_sser_thr8 0x00000000 -#define regk_sser_tr 0x00000001 -#define regk_sser_ts_out 0x00000003 -#define regk_sser_tx_bulk 0x00000002 -#define regk_sser_wiresave 0x00000002 -#define regk_sser_yes 0x00000001 -#endif /* __sser_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h deleted file mode 100644 index 55083e6aec93..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef __strcop_defs_asm_h -#define __strcop_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/strcop/rtl/strcop_regs.r - * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp - * last modfied: Mon Apr 11 16:09:38 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/strcop_defs_asm.h ../../inst/strcop/rtl/strcop_regs.r - * id: $Id: strcop_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope strcop, type rw */ -#define reg_strcop_rw_cfg___td3___lsb 0 -#define reg_strcop_rw_cfg___td3___width 1 -#define reg_strcop_rw_cfg___td3___bit 0 -#define reg_strcop_rw_cfg___td2___lsb 1 -#define reg_strcop_rw_cfg___td2___width 1 -#define reg_strcop_rw_cfg___td2___bit 1 -#define reg_strcop_rw_cfg___td1___lsb 2 -#define reg_strcop_rw_cfg___td1___width 1 -#define reg_strcop_rw_cfg___td1___bit 2 -#define reg_strcop_rw_cfg___ipend___lsb 3 -#define reg_strcop_rw_cfg___ipend___width 1 -#define reg_strcop_rw_cfg___ipend___bit 3 -#define reg_strcop_rw_cfg___ignore_sync___lsb 4 -#define reg_strcop_rw_cfg___ignore_sync___width 1 -#define reg_strcop_rw_cfg___ignore_sync___bit 4 -#define reg_strcop_rw_cfg___en___lsb 5 -#define reg_strcop_rw_cfg___en___width 1 -#define reg_strcop_rw_cfg___en___bit 5 -#define reg_strcop_rw_cfg_offset 0 - - -/* Constants */ -#define regk_strcop_big 0x00000001 -#define regk_strcop_d 0x00000001 -#define regk_strcop_e 0x00000000 -#define regk_strcop_little 0x00000000 -#define regk_strcop_rw_cfg_default 0x00000002 -#endif /* __strcop_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h deleted file mode 100644 index 69b299920f71..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h +++ /dev/null @@ -1,100 +0,0 @@ -#ifndef __strmux_defs_asm_h -#define __strmux_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/strmux/rtl/guinness/strmux_regs.r - * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp - * last modfied: Mon Apr 11 16:09:43 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/strmux_defs_asm.h ../../inst/strmux/rtl/guinness/strmux_regs.r - * id: $Id: strmux_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope strmux, type rw */ -#define reg_strmux_rw_cfg___dma0___lsb 0 -#define reg_strmux_rw_cfg___dma0___width 3 -#define reg_strmux_rw_cfg___dma1___lsb 3 -#define reg_strmux_rw_cfg___dma1___width 3 -#define reg_strmux_rw_cfg___dma2___lsb 6 -#define reg_strmux_rw_cfg___dma2___width 3 -#define reg_strmux_rw_cfg___dma3___lsb 9 -#define reg_strmux_rw_cfg___dma3___width 3 -#define reg_strmux_rw_cfg___dma4___lsb 12 -#define reg_strmux_rw_cfg___dma4___width 3 -#define reg_strmux_rw_cfg___dma5___lsb 15 -#define reg_strmux_rw_cfg___dma5___width 3 -#define reg_strmux_rw_cfg___dma6___lsb 18 -#define reg_strmux_rw_cfg___dma6___width 3 -#define reg_strmux_rw_cfg___dma7___lsb 21 -#define reg_strmux_rw_cfg___dma7___width 3 -#define reg_strmux_rw_cfg___dma8___lsb 24 -#define reg_strmux_rw_cfg___dma8___width 3 -#define reg_strmux_rw_cfg___dma9___lsb 27 -#define reg_strmux_rw_cfg___dma9___width 3 -#define reg_strmux_rw_cfg_offset 0 - - -/* Constants */ -#define regk_strmux_ata 0x00000003 -#define regk_strmux_eth0 0x00000001 -#define regk_strmux_eth1 0x00000004 -#define regk_strmux_ext0 0x00000001 -#define regk_strmux_ext1 0x00000001 -#define regk_strmux_ext2 0x00000001 -#define regk_strmux_ext3 0x00000001 -#define regk_strmux_iop0 0x00000002 -#define regk_strmux_iop1 0x00000001 -#define regk_strmux_off 0x00000000 -#define regk_strmux_p21 0x00000004 -#define regk_strmux_rw_cfg_default 0x00000000 -#define regk_strmux_ser0 0x00000002 -#define regk_strmux_ser1 0x00000002 -#define regk_strmux_ser2 0x00000004 -#define regk_strmux_ser3 0x00000003 -#define regk_strmux_sser0 0x00000003 -#define regk_strmux_sser1 0x00000003 -#define regk_strmux_strcop 0x00000002 -#endif /* __strmux_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h b/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h deleted file mode 100644 index 43146021fc16..000000000000 --- a/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h +++ /dev/null @@ -1,229 +0,0 @@ -#ifndef __timer_defs_asm_h -#define __timer_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/timer/rtl/timer_regs.r - * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp - * last modfied: Mon Apr 11 16:09:53 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/timer_defs_asm.h ../../inst/timer/rtl/timer_regs.r - * id: $Id: timer_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_tmr0_div, scope timer, type rw */ -#define reg_timer_rw_tmr0_div_offset 0 - -/* Register r_tmr0_data, scope timer, type r */ -#define reg_timer_r_tmr0_data_offset 4 - -/* Register rw_tmr0_ctrl, scope timer, type rw */ -#define reg_timer_rw_tmr0_ctrl___op___lsb 0 -#define reg_timer_rw_tmr0_ctrl___op___width 2 -#define reg_timer_rw_tmr0_ctrl___freq___lsb 2 -#define reg_timer_rw_tmr0_ctrl___freq___width 3 -#define reg_timer_rw_tmr0_ctrl_offset 8 - -/* Register rw_tmr1_div, scope timer, type rw */ -#define reg_timer_rw_tmr1_div_offset 16 - -/* Register r_tmr1_data, scope timer, type r */ -#define reg_timer_r_tmr1_data_offset 20 - -/* Register rw_tmr1_ctrl, scope timer, type rw */ -#define reg_timer_rw_tmr1_ctrl___op___lsb 0 -#define reg_timer_rw_tmr1_ctrl___op___width 2 -#define reg_timer_rw_tmr1_ctrl___freq___lsb 2 -#define reg_timer_rw_tmr1_ctrl___freq___width 3 -#define reg_timer_rw_tmr1_ctrl_offset 24 - -/* Register rs_cnt_data, scope timer, type rs */ -#define reg_timer_rs_cnt_data___tmr___lsb 0 -#define reg_timer_rs_cnt_data___tmr___width 24 -#define reg_timer_rs_cnt_data___cnt___lsb 24 -#define reg_timer_rs_cnt_data___cnt___width 8 -#define reg_timer_rs_cnt_data_offset 32 - -/* Register r_cnt_data, scope timer, type r */ -#define reg_timer_r_cnt_data___tmr___lsb 0 -#define reg_timer_r_cnt_data___tmr___width 24 -#define reg_timer_r_cnt_data___cnt___lsb 24 -#define reg_timer_r_cnt_data___cnt___width 8 -#define reg_timer_r_cnt_data_offset 36 - -/* Register rw_cnt_cfg, scope timer, type rw */ -#define reg_timer_rw_cnt_cfg___clk___lsb 0 -#define reg_timer_rw_cnt_cfg___clk___width 2 -#define reg_timer_rw_cnt_cfg_offset 40 - -/* Register rw_trig, scope timer, type rw */ -#define reg_timer_rw_trig_offset 48 - -/* Register rw_trig_cfg, scope timer, type rw */ -#define reg_timer_rw_trig_cfg___tmr___lsb 0 -#define reg_timer_rw_trig_cfg___tmr___width 2 -#define reg_timer_rw_trig_cfg_offset 52 - -/* Register r_time, scope timer, type r */ -#define reg_timer_r_time_offset 56 - -/* Register rw_out, scope timer, type rw */ -#define reg_timer_rw_out___tmr___lsb 0 -#define reg_timer_rw_out___tmr___width 2 -#define reg_timer_rw_out_offset 60 - -/* Register rw_wd_ctrl, scope timer, type rw */ -#define reg_timer_rw_wd_ctrl___cnt___lsb 0 -#define reg_timer_rw_wd_ctrl___cnt___width 8 -#define reg_timer_rw_wd_ctrl___cmd___lsb 8 -#define reg_timer_rw_wd_ctrl___cmd___width 1 -#define reg_timer_rw_wd_ctrl___cmd___bit 8 -#define reg_timer_rw_wd_ctrl___key___lsb 9 -#define reg_timer_rw_wd_ctrl___key___width 7 -#define reg_timer_rw_wd_ctrl_offset 64 - -/* Register r_wd_stat, scope timer, type r */ -#define reg_timer_r_wd_stat___cnt___lsb 0 -#define reg_timer_r_wd_stat___cnt___width 8 -#define reg_timer_r_wd_stat___cmd___lsb 8 -#define reg_timer_r_wd_stat___cmd___width 1 -#define reg_timer_r_wd_stat___cmd___bit 8 -#define reg_timer_r_wd_stat_offset 68 - -/* Register rw_intr_mask, scope timer, type rw */ -#define reg_timer_rw_intr_mask___tmr0___lsb 0 -#define reg_timer_rw_intr_mask___tmr0___width 1 -#define reg_timer_rw_intr_mask___tmr0___bit 0 -#define reg_timer_rw_intr_mask___tmr1___lsb 1 -#define reg_timer_rw_intr_mask___tmr1___width 1 -#define reg_timer_rw_intr_mask___tmr1___bit 1 -#define reg_timer_rw_intr_mask___cnt___lsb 2 -#define reg_timer_rw_intr_mask___cnt___width 1 -#define reg_timer_rw_intr_mask___cnt___bit 2 -#define reg_timer_rw_intr_mask___trig___lsb 3 -#define reg_timer_rw_intr_mask___trig___width 1 -#define reg_timer_rw_intr_mask___trig___bit 3 -#define reg_timer_rw_intr_mask_offset 72 - -/* Register rw_ack_intr, scope timer, type rw */ -#define reg_timer_rw_ack_intr___tmr0___lsb 0 -#define reg_timer_rw_ack_intr___tmr0___width 1 -#define reg_timer_rw_ack_intr___tmr0___bit 0 -#define reg_timer_rw_ack_intr___tmr1___lsb 1 -#define reg_timer_rw_ack_intr___tmr1___width 1 -#define reg_timer_rw_ack_intr___tmr1___bit 1 -#define reg_timer_rw_ack_intr___cnt___lsb 2 -#define reg_timer_rw_ack_intr___cnt___width 1 -#define reg_timer_rw_ack_intr___cnt___bit 2 -#define reg_timer_rw_ack_intr___trig___lsb 3 -#define reg_timer_rw_ack_intr___trig___width 1 -#define reg_timer_rw_ack_intr___trig___bit 3 -#define reg_timer_rw_ack_intr_offset 76 - -/* Register r_intr, scope timer, type r */ -#define reg_timer_r_intr___tmr0___lsb 0 -#define reg_timer_r_intr___tmr0___width 1 -#define reg_timer_r_intr___tmr0___bit 0 -#define reg_timer_r_intr___tmr1___lsb 1 -#define reg_timer_r_intr___tmr1___width 1 -#define reg_timer_r_intr___tmr1___bit 1 -#define reg_timer_r_intr___cnt___lsb 2 -#define reg_timer_r_intr___cnt___width 1 -#define reg_timer_r_intr___cnt___bit 2 -#define reg_timer_r_intr___trig___lsb 3 -#define reg_timer_r_intr___trig___width 1 -#define reg_timer_r_intr___trig___bit 3 -#define reg_timer_r_intr_offset 80 - -/* Register r_masked_intr, scope timer, type r */ -#define reg_timer_r_masked_intr___tmr0___lsb 0 -#define reg_timer_r_masked_intr___tmr0___width 1 -#define reg_timer_r_masked_intr___tmr0___bit 0 -#define reg_timer_r_masked_intr___tmr1___lsb 1 -#define reg_timer_r_masked_intr___tmr1___width 1 -#define reg_timer_r_masked_intr___tmr1___bit 1 -#define reg_timer_r_masked_intr___cnt___lsb 2 -#define reg_timer_r_masked_intr___cnt___width 1 -#define reg_timer_r_masked_intr___cnt___bit 2 -#define reg_timer_r_masked_intr___trig___lsb 3 -#define reg_timer_r_masked_intr___trig___width 1 -#define reg_timer_r_masked_intr___trig___bit 3 -#define reg_timer_r_masked_intr_offset 84 - -/* Register rw_test, scope timer, type rw */ -#define reg_timer_rw_test___dis___lsb 0 -#define reg_timer_rw_test___dis___width 1 -#define reg_timer_rw_test___dis___bit 0 -#define reg_timer_rw_test___en___lsb 1 -#define reg_timer_rw_test___en___width 1 -#define reg_timer_rw_test___en___bit 1 -#define reg_timer_rw_test_offset 88 - - -/* Constants */ -#define regk_timer_ext 0x00000001 -#define regk_timer_f100 0x00000007 -#define regk_timer_f29_493 0x00000004 -#define regk_timer_f32 0x00000005 -#define regk_timer_f32_768 0x00000006 -#define regk_timer_hold 0x00000001 -#define regk_timer_ld 0x00000000 -#define regk_timer_no 0x00000000 -#define regk_timer_off 0x00000000 -#define regk_timer_run 0x00000002 -#define regk_timer_rw_cnt_cfg_default 0x00000000 -#define regk_timer_rw_intr_mask_default 0x00000000 -#define regk_timer_rw_out_default 0x00000000 -#define regk_timer_rw_test_default 0x00000000 -#define regk_timer_rw_tmr0_ctrl_default 0x00000000 -#define regk_timer_rw_tmr1_ctrl_default 0x00000000 -#define regk_timer_rw_trig_cfg_default 0x00000000 -#define regk_timer_start 0x00000001 -#define regk_timer_stop 0x00000000 -#define regk_timer_time 0x00000001 -#define regk_timer_tmr0 0x00000002 -#define regk_timer_tmr1 0x00000003 -#define regk_timer_yes 0x00000001 -#endif /* __timer_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/ata_defs.h b/include/asm-cris/arch-v32/hwregs/ata_defs.h deleted file mode 100644 index 43b6643ff0d3..000000000000 --- a/include/asm-cris/arch-v32/hwregs/ata_defs.h +++ /dev/null @@ -1,222 +0,0 @@ -#ifndef __ata_defs_h -#define __ata_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/ata/rtl/ata_regs.r - * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp - * last modfied: Mon Apr 11 16:06:25 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile ata_defs.h ../../inst/ata/rtl/ata_regs.r - * id: $Id: ata_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope ata */ - -/* Register rw_ctrl0, scope ata, type rw */ -typedef struct { - unsigned int pio_hold : 6; - unsigned int pio_strb : 6; - unsigned int pio_setup : 6; - unsigned int dma_hold : 6; - unsigned int dma_strb : 6; - unsigned int rst : 1; - unsigned int en : 1; -} reg_ata_rw_ctrl0; -#define REG_RD_ADDR_ata_rw_ctrl0 12 -#define REG_WR_ADDR_ata_rw_ctrl0 12 - -/* Register rw_ctrl1, scope ata, type rw */ -typedef struct { - unsigned int udma_tcyc : 4; - unsigned int udma_tdvs : 4; - unsigned int dummy1 : 24; -} reg_ata_rw_ctrl1; -#define REG_RD_ADDR_ata_rw_ctrl1 16 -#define REG_WR_ADDR_ata_rw_ctrl1 16 - -/* Register rw_ctrl2, scope ata, type rw */ -typedef struct { - unsigned int data : 16; - unsigned int dummy1 : 3; - unsigned int dma_size : 1; - unsigned int multi : 1; - unsigned int hsh : 2; - unsigned int trf_mode : 1; - unsigned int rw : 1; - unsigned int addr : 3; - unsigned int cs0 : 1; - unsigned int cs1 : 1; - unsigned int sel : 2; -} reg_ata_rw_ctrl2; -#define REG_RD_ADDR_ata_rw_ctrl2 0 -#define REG_WR_ADDR_ata_rw_ctrl2 0 - -/* Register rs_stat_data, scope ata, type rs */ -typedef struct { - unsigned int data : 16; - unsigned int dav : 1; - unsigned int busy : 1; - unsigned int dummy1 : 14; -} reg_ata_rs_stat_data; -#define REG_RD_ADDR_ata_rs_stat_data 4 - -/* Register r_stat_data, scope ata, type r */ -typedef struct { - unsigned int data : 16; - unsigned int dav : 1; - unsigned int busy : 1; - unsigned int dummy1 : 14; -} reg_ata_r_stat_data; -#define REG_RD_ADDR_ata_r_stat_data 8 - -/* Register rw_trf_cnt, scope ata, type rw */ -typedef struct { - unsigned int cnt : 17; - unsigned int dummy1 : 15; -} reg_ata_rw_trf_cnt; -#define REG_RD_ADDR_ata_rw_trf_cnt 20 -#define REG_WR_ADDR_ata_rw_trf_cnt 20 - -/* Register r_stat_misc, scope ata, type r */ -typedef struct { - unsigned int crc : 16; - unsigned int dummy1 : 16; -} reg_ata_r_stat_misc; -#define REG_RD_ADDR_ata_r_stat_misc 24 - -/* Register rw_intr_mask, scope ata, type rw */ -typedef struct { - unsigned int bus0 : 1; - unsigned int bus1 : 1; - unsigned int bus2 : 1; - unsigned int bus3 : 1; - unsigned int dummy1 : 28; -} reg_ata_rw_intr_mask; -#define REG_RD_ADDR_ata_rw_intr_mask 28 -#define REG_WR_ADDR_ata_rw_intr_mask 28 - -/* Register rw_ack_intr, scope ata, type rw */ -typedef struct { - unsigned int bus0 : 1; - unsigned int bus1 : 1; - unsigned int bus2 : 1; - unsigned int bus3 : 1; - unsigned int dummy1 : 28; -} reg_ata_rw_ack_intr; -#define REG_RD_ADDR_ata_rw_ack_intr 32 -#define REG_WR_ADDR_ata_rw_ack_intr 32 - -/* Register r_intr, scope ata, type r */ -typedef struct { - unsigned int bus0 : 1; - unsigned int bus1 : 1; - unsigned int bus2 : 1; - unsigned int bus3 : 1; - unsigned int dummy1 : 28; -} reg_ata_r_intr; -#define REG_RD_ADDR_ata_r_intr 36 - -/* Register r_masked_intr, scope ata, type r */ -typedef struct { - unsigned int bus0 : 1; - unsigned int bus1 : 1; - unsigned int bus2 : 1; - unsigned int bus3 : 1; - unsigned int dummy1 : 28; -} reg_ata_r_masked_intr; -#define REG_RD_ADDR_ata_r_masked_intr 40 - - -/* Constants */ -enum { - regk_ata_active = 0x00000001, - regk_ata_byte = 0x00000001, - regk_ata_data = 0x00000001, - regk_ata_dma = 0x00000001, - regk_ata_inactive = 0x00000000, - regk_ata_no = 0x00000000, - regk_ata_nodata = 0x00000000, - regk_ata_pio = 0x00000000, - regk_ata_rd = 0x00000001, - regk_ata_reg = 0x00000000, - regk_ata_rw_ctrl0_default = 0x00000000, - regk_ata_rw_ctrl2_default = 0x00000000, - regk_ata_rw_intr_mask_default = 0x00000000, - regk_ata_udma = 0x00000002, - regk_ata_word = 0x00000000, - regk_ata_wr = 0x00000000, - regk_ata_yes = 0x00000001 -}; -#endif /* __ata_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/bif_core_defs.h b/include/asm-cris/arch-v32/hwregs/bif_core_defs.h deleted file mode 100644 index a56608b50359..000000000000 --- a/include/asm-cris/arch-v32/hwregs/bif_core_defs.h +++ /dev/null @@ -1,284 +0,0 @@ -#ifndef __bif_core_defs_h -#define __bif_core_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_core_regs.r - * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp - * last modfied: Mon Apr 11 16:06:33 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_core_defs.h ../../inst/bif/rtl/bif_core_regs.r - * id: $Id: bif_core_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope bif_core */ - -/* Register rw_grp1_cfg, scope bif_core, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int wr_extend : 1; - unsigned int erc_en : 1; - unsigned int mode : 1; - unsigned int dummy1 : 10; -} reg_bif_core_rw_grp1_cfg; -#define REG_RD_ADDR_bif_core_rw_grp1_cfg 0 -#define REG_WR_ADDR_bif_core_rw_grp1_cfg 0 - -/* Register rw_grp2_cfg, scope bif_core, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int wr_extend : 1; - unsigned int erc_en : 1; - unsigned int mode : 1; - unsigned int dummy1 : 10; -} reg_bif_core_rw_grp2_cfg; -#define REG_RD_ADDR_bif_core_rw_grp2_cfg 4 -#define REG_WR_ADDR_bif_core_rw_grp2_cfg 4 - -/* Register rw_grp3_cfg, scope bif_core, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int wr_extend : 1; - unsigned int erc_en : 1; - unsigned int mode : 1; - unsigned int dummy1 : 2; - unsigned int gated_csp0 : 2; - unsigned int gated_csp1 : 2; - unsigned int gated_csp2 : 2; - unsigned int gated_csp3 : 2; -} reg_bif_core_rw_grp3_cfg; -#define REG_RD_ADDR_bif_core_rw_grp3_cfg 8 -#define REG_WR_ADDR_bif_core_rw_grp3_cfg 8 - -/* Register rw_grp4_cfg, scope bif_core, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int wr_extend : 1; - unsigned int erc_en : 1; - unsigned int mode : 1; - unsigned int dummy1 : 4; - unsigned int gated_csp4 : 2; - unsigned int gated_csp5 : 2; - unsigned int gated_csp6 : 2; -} reg_bif_core_rw_grp4_cfg; -#define REG_RD_ADDR_bif_core_rw_grp4_cfg 12 -#define REG_WR_ADDR_bif_core_rw_grp4_cfg 12 - -/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */ -typedef struct { - unsigned int bank_sel : 5; - unsigned int ca : 3; - unsigned int type : 1; - unsigned int bw : 1; - unsigned int sh : 3; - unsigned int wmm : 1; - unsigned int sh16 : 1; - unsigned int grp_sel : 5; - unsigned int dummy1 : 12; -} reg_bif_core_rw_sdram_cfg_grp0; -#define REG_RD_ADDR_bif_core_rw_sdram_cfg_grp0 16 -#define REG_WR_ADDR_bif_core_rw_sdram_cfg_grp0 16 - -/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */ -typedef struct { - unsigned int bank_sel : 5; - unsigned int ca : 3; - unsigned int type : 1; - unsigned int bw : 1; - unsigned int sh : 3; - unsigned int wmm : 1; - unsigned int sh16 : 1; - unsigned int dummy1 : 17; -} reg_bif_core_rw_sdram_cfg_grp1; -#define REG_RD_ADDR_bif_core_rw_sdram_cfg_grp1 20 -#define REG_WR_ADDR_bif_core_rw_sdram_cfg_grp1 20 - -/* Register rw_sdram_timing, scope bif_core, type rw */ -typedef struct { - unsigned int cl : 3; - unsigned int rcd : 3; - unsigned int rp : 3; - unsigned int rc : 2; - unsigned int dpl : 2; - unsigned int pde : 1; - unsigned int ref : 2; - unsigned int cpd : 1; - unsigned int sdcke : 1; - unsigned int sdclk : 1; - unsigned int dummy1 : 13; -} reg_bif_core_rw_sdram_timing; -#define REG_RD_ADDR_bif_core_rw_sdram_timing 24 -#define REG_WR_ADDR_bif_core_rw_sdram_timing 24 - -/* Register rw_sdram_cmd, scope bif_core, type rw */ -typedef struct { - unsigned int cmd : 3; - unsigned int mrs_data : 15; - unsigned int dummy1 : 14; -} reg_bif_core_rw_sdram_cmd; -#define REG_RD_ADDR_bif_core_rw_sdram_cmd 28 -#define REG_WR_ADDR_bif_core_rw_sdram_cmd 28 - -/* Register rs_sdram_ref_stat, scope bif_core, type rs */ -typedef struct { - unsigned int ok : 1; - unsigned int dummy1 : 31; -} reg_bif_core_rs_sdram_ref_stat; -#define REG_RD_ADDR_bif_core_rs_sdram_ref_stat 32 - -/* Register r_sdram_ref_stat, scope bif_core, type r */ -typedef struct { - unsigned int ok : 1; - unsigned int dummy1 : 31; -} reg_bif_core_r_sdram_ref_stat; -#define REG_RD_ADDR_bif_core_r_sdram_ref_stat 36 - - -/* Constants */ -enum { - regk_bif_core_bank2 = 0x00000000, - regk_bif_core_bank4 = 0x00000001, - regk_bif_core_bit10 = 0x0000000a, - regk_bif_core_bit11 = 0x0000000b, - regk_bif_core_bit12 = 0x0000000c, - regk_bif_core_bit13 = 0x0000000d, - regk_bif_core_bit14 = 0x0000000e, - regk_bif_core_bit15 = 0x0000000f, - regk_bif_core_bit16 = 0x00000010, - regk_bif_core_bit17 = 0x00000011, - regk_bif_core_bit18 = 0x00000012, - regk_bif_core_bit19 = 0x00000013, - regk_bif_core_bit20 = 0x00000014, - regk_bif_core_bit21 = 0x00000015, - regk_bif_core_bit22 = 0x00000016, - regk_bif_core_bit23 = 0x00000017, - regk_bif_core_bit24 = 0x00000018, - regk_bif_core_bit25 = 0x00000019, - regk_bif_core_bit26 = 0x0000001a, - regk_bif_core_bit27 = 0x0000001b, - regk_bif_core_bit28 = 0x0000001c, - regk_bif_core_bit29 = 0x0000001d, - regk_bif_core_bit9 = 0x00000009, - regk_bif_core_bw16 = 0x00000001, - regk_bif_core_bw32 = 0x00000000, - regk_bif_core_bwe = 0x00000000, - regk_bif_core_cwe = 0x00000001, - regk_bif_core_e15us = 0x00000001, - regk_bif_core_e7800ns = 0x00000002, - regk_bif_core_grp0 = 0x00000000, - regk_bif_core_grp1 = 0x00000001, - regk_bif_core_mrs = 0x00000003, - regk_bif_core_no = 0x00000000, - regk_bif_core_none = 0x00000000, - regk_bif_core_nop = 0x00000000, - regk_bif_core_off = 0x00000000, - regk_bif_core_pre = 0x00000002, - regk_bif_core_r_sdram_ref_stat_default = 0x00000001, - regk_bif_core_rd = 0x00000002, - regk_bif_core_ref = 0x00000001, - regk_bif_core_rs_sdram_ref_stat_default = 0x00000001, - regk_bif_core_rw_grp1_cfg_default = 0x000006cf, - regk_bif_core_rw_grp2_cfg_default = 0x000006cf, - regk_bif_core_rw_grp3_cfg_default = 0x000006cf, - regk_bif_core_rw_grp4_cfg_default = 0x000006cf, - regk_bif_core_rw_sdram_cfg_grp1_default = 0x00000000, - regk_bif_core_slf = 0x00000004, - regk_bif_core_wr = 0x00000001, - regk_bif_core_yes = 0x00000001 -}; -#endif /* __bif_core_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h b/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h deleted file mode 100644 index b931c1aab679..000000000000 --- a/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h +++ /dev/null @@ -1,473 +0,0 @@ -#ifndef __bif_dma_defs_h -#define __bif_dma_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_dma_regs.r - * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp - * last modfied: Mon Apr 11 16:06:33 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_dma_defs.h ../../inst/bif/rtl/bif_dma_regs.r - * id: $Id: bif_dma_defs.h,v 1.2 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope bif_dma */ - -/* Register rw_ch0_ctrl, scope bif_dma, type rw */ -typedef struct { - unsigned int bw : 2; - unsigned int burst_len : 1; - unsigned int cont : 1; - unsigned int end_pad : 1; - unsigned int cnt : 1; - unsigned int dreq_pin : 3; - unsigned int dreq_mode : 2; - unsigned int tc_in_pin : 3; - unsigned int tc_in_mode : 2; - unsigned int bus_mode : 2; - unsigned int rate_en : 1; - unsigned int wr_all : 1; - unsigned int dummy1 : 12; -} reg_bif_dma_rw_ch0_ctrl; -#define REG_RD_ADDR_bif_dma_rw_ch0_ctrl 0 -#define REG_WR_ADDR_bif_dma_rw_ch0_ctrl 0 - -/* Register rw_ch0_addr, scope bif_dma, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_bif_dma_rw_ch0_addr; -#define REG_RD_ADDR_bif_dma_rw_ch0_addr 4 -#define REG_WR_ADDR_bif_dma_rw_ch0_addr 4 - -/* Register rw_ch0_start, scope bif_dma, type rw */ -typedef struct { - unsigned int run : 1; - unsigned int dummy1 : 31; -} reg_bif_dma_rw_ch0_start; -#define REG_RD_ADDR_bif_dma_rw_ch0_start 8 -#define REG_WR_ADDR_bif_dma_rw_ch0_start 8 - -/* Register rw_ch0_cnt, scope bif_dma, type rw */ -typedef struct { - unsigned int start_cnt : 16; - unsigned int dummy1 : 16; -} reg_bif_dma_rw_ch0_cnt; -#define REG_RD_ADDR_bif_dma_rw_ch0_cnt 12 -#define REG_WR_ADDR_bif_dma_rw_ch0_cnt 12 - -/* Register r_ch0_stat, scope bif_dma, type r */ -typedef struct { - unsigned int cnt : 16; - unsigned int dummy1 : 15; - unsigned int run : 1; -} reg_bif_dma_r_ch0_stat; -#define REG_RD_ADDR_bif_dma_r_ch0_stat 16 - -/* Register rw_ch1_ctrl, scope bif_dma, type rw */ -typedef struct { - unsigned int bw : 2; - unsigned int burst_len : 1; - unsigned int cont : 1; - unsigned int end_discard : 1; - unsigned int cnt : 1; - unsigned int dreq_pin : 3; - unsigned int dreq_mode : 2; - unsigned int tc_in_pin : 3; - unsigned int tc_in_mode : 2; - unsigned int bus_mode : 2; - unsigned int rate_en : 1; - unsigned int dummy1 : 13; -} reg_bif_dma_rw_ch1_ctrl; -#define REG_RD_ADDR_bif_dma_rw_ch1_ctrl 32 -#define REG_WR_ADDR_bif_dma_rw_ch1_ctrl 32 - -/* Register rw_ch1_addr, scope bif_dma, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_bif_dma_rw_ch1_addr; -#define REG_RD_ADDR_bif_dma_rw_ch1_addr 36 -#define REG_WR_ADDR_bif_dma_rw_ch1_addr 36 - -/* Register rw_ch1_start, scope bif_dma, type rw */ -typedef struct { - unsigned int run : 1; - unsigned int dummy1 : 31; -} reg_bif_dma_rw_ch1_start; -#define REG_RD_ADDR_bif_dma_rw_ch1_start 40 -#define REG_WR_ADDR_bif_dma_rw_ch1_start 40 - -/* Register rw_ch1_cnt, scope bif_dma, type rw */ -typedef struct { - unsigned int start_cnt : 16; - unsigned int dummy1 : 16; -} reg_bif_dma_rw_ch1_cnt; -#define REG_RD_ADDR_bif_dma_rw_ch1_cnt 44 -#define REG_WR_ADDR_bif_dma_rw_ch1_cnt 44 - -/* Register r_ch1_stat, scope bif_dma, type r */ -typedef struct { - unsigned int cnt : 16; - unsigned int dummy1 : 15; - unsigned int run : 1; -} reg_bif_dma_r_ch1_stat; -#define REG_RD_ADDR_bif_dma_r_ch1_stat 48 - -/* Register rw_ch2_ctrl, scope bif_dma, type rw */ -typedef struct { - unsigned int bw : 2; - unsigned int burst_len : 1; - unsigned int cont : 1; - unsigned int end_pad : 1; - unsigned int cnt : 1; - unsigned int dreq_pin : 3; - unsigned int dreq_mode : 2; - unsigned int tc_in_pin : 3; - unsigned int tc_in_mode : 2; - unsigned int bus_mode : 2; - unsigned int rate_en : 1; - unsigned int wr_all : 1; - unsigned int dummy1 : 12; -} reg_bif_dma_rw_ch2_ctrl; -#define REG_RD_ADDR_bif_dma_rw_ch2_ctrl 64 -#define REG_WR_ADDR_bif_dma_rw_ch2_ctrl 64 - -/* Register rw_ch2_addr, scope bif_dma, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_bif_dma_rw_ch2_addr; -#define REG_RD_ADDR_bif_dma_rw_ch2_addr 68 -#define REG_WR_ADDR_bif_dma_rw_ch2_addr 68 - -/* Register rw_ch2_start, scope bif_dma, type rw */ -typedef struct { - unsigned int run : 1; - unsigned int dummy1 : 31; -} reg_bif_dma_rw_ch2_start; -#define REG_RD_ADDR_bif_dma_rw_ch2_start 72 -#define REG_WR_ADDR_bif_dma_rw_ch2_start 72 - -/* Register rw_ch2_cnt, scope bif_dma, type rw */ -typedef struct { - unsigned int start_cnt : 16; - unsigned int dummy1 : 16; -} reg_bif_dma_rw_ch2_cnt; -#define REG_RD_ADDR_bif_dma_rw_ch2_cnt 76 -#define REG_WR_ADDR_bif_dma_rw_ch2_cnt 76 - -/* Register r_ch2_stat, scope bif_dma, type r */ -typedef struct { - unsigned int cnt : 16; - unsigned int dummy1 : 15; - unsigned int run : 1; -} reg_bif_dma_r_ch2_stat; -#define REG_RD_ADDR_bif_dma_r_ch2_stat 80 - -/* Register rw_ch3_ctrl, scope bif_dma, type rw */ -typedef struct { - unsigned int bw : 2; - unsigned int burst_len : 1; - unsigned int cont : 1; - unsigned int end_discard : 1; - unsigned int cnt : 1; - unsigned int dreq_pin : 3; - unsigned int dreq_mode : 2; - unsigned int tc_in_pin : 3; - unsigned int tc_in_mode : 2; - unsigned int bus_mode : 2; - unsigned int rate_en : 1; - unsigned int dummy1 : 13; -} reg_bif_dma_rw_ch3_ctrl; -#define REG_RD_ADDR_bif_dma_rw_ch3_ctrl 96 -#define REG_WR_ADDR_bif_dma_rw_ch3_ctrl 96 - -/* Register rw_ch3_addr, scope bif_dma, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_bif_dma_rw_ch3_addr; -#define REG_RD_ADDR_bif_dma_rw_ch3_addr 100 -#define REG_WR_ADDR_bif_dma_rw_ch3_addr 100 - -/* Register rw_ch3_start, scope bif_dma, type rw */ -typedef struct { - unsigned int run : 1; - unsigned int dummy1 : 31; -} reg_bif_dma_rw_ch3_start; -#define REG_RD_ADDR_bif_dma_rw_ch3_start 104 -#define REG_WR_ADDR_bif_dma_rw_ch3_start 104 - -/* Register rw_ch3_cnt, scope bif_dma, type rw */ -typedef struct { - unsigned int start_cnt : 16; - unsigned int dummy1 : 16; -} reg_bif_dma_rw_ch3_cnt; -#define REG_RD_ADDR_bif_dma_rw_ch3_cnt 108 -#define REG_WR_ADDR_bif_dma_rw_ch3_cnt 108 - -/* Register r_ch3_stat, scope bif_dma, type r */ -typedef struct { - unsigned int cnt : 16; - unsigned int dummy1 : 15; - unsigned int run : 1; -} reg_bif_dma_r_ch3_stat; -#define REG_RD_ADDR_bif_dma_r_ch3_stat 112 - -/* Register rw_intr_mask, scope bif_dma, type rw */ -typedef struct { - unsigned int ext_dma0 : 1; - unsigned int ext_dma1 : 1; - unsigned int ext_dma2 : 1; - unsigned int ext_dma3 : 1; - unsigned int dummy1 : 28; -} reg_bif_dma_rw_intr_mask; -#define REG_RD_ADDR_bif_dma_rw_intr_mask 128 -#define REG_WR_ADDR_bif_dma_rw_intr_mask 128 - -/* Register rw_ack_intr, scope bif_dma, type rw */ -typedef struct { - unsigned int ext_dma0 : 1; - unsigned int ext_dma1 : 1; - unsigned int ext_dma2 : 1; - unsigned int ext_dma3 : 1; - unsigned int dummy1 : 28; -} reg_bif_dma_rw_ack_intr; -#define REG_RD_ADDR_bif_dma_rw_ack_intr 132 -#define REG_WR_ADDR_bif_dma_rw_ack_intr 132 - -/* Register r_intr, scope bif_dma, type r */ -typedef struct { - unsigned int ext_dma0 : 1; - unsigned int ext_dma1 : 1; - unsigned int ext_dma2 : 1; - unsigned int ext_dma3 : 1; - unsigned int dummy1 : 28; -} reg_bif_dma_r_intr; -#define REG_RD_ADDR_bif_dma_r_intr 136 - -/* Register r_masked_intr, scope bif_dma, type r */ -typedef struct { - unsigned int ext_dma0 : 1; - unsigned int ext_dma1 : 1; - unsigned int ext_dma2 : 1; - unsigned int ext_dma3 : 1; - unsigned int dummy1 : 28; -} reg_bif_dma_r_masked_intr; -#define REG_RD_ADDR_bif_dma_r_masked_intr 140 - -/* Register rw_pin0_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin0_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin0_cfg 160 -#define REG_WR_ADDR_bif_dma_rw_pin0_cfg 160 - -/* Register rw_pin1_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin1_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin1_cfg 164 -#define REG_WR_ADDR_bif_dma_rw_pin1_cfg 164 - -/* Register rw_pin2_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin2_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin2_cfg 168 -#define REG_WR_ADDR_bif_dma_rw_pin2_cfg 168 - -/* Register rw_pin3_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin3_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin3_cfg 172 -#define REG_WR_ADDR_bif_dma_rw_pin3_cfg 172 - -/* Register rw_pin4_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin4_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin4_cfg 176 -#define REG_WR_ADDR_bif_dma_rw_pin4_cfg 176 - -/* Register rw_pin5_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin5_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin5_cfg 180 -#define REG_WR_ADDR_bif_dma_rw_pin5_cfg 180 - -/* Register rw_pin6_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin6_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin6_cfg 184 -#define REG_WR_ADDR_bif_dma_rw_pin6_cfg 184 - -/* Register rw_pin7_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin7_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin7_cfg 188 -#define REG_WR_ADDR_bif_dma_rw_pin7_cfg 188 - -/* Register r_pin_stat, scope bif_dma, type r */ -typedef struct { - unsigned int pin0 : 1; - unsigned int pin1 : 1; - unsigned int pin2 : 1; - unsigned int pin3 : 1; - unsigned int pin4 : 1; - unsigned int pin5 : 1; - unsigned int pin6 : 1; - unsigned int pin7 : 1; - unsigned int dummy1 : 24; -} reg_bif_dma_r_pin_stat; -#define REG_RD_ADDR_bif_dma_r_pin_stat 192 - - -/* Constants */ -enum { - regk_bif_dma_as_master = 0x00000001, - regk_bif_dma_as_slave = 0x00000001, - regk_bif_dma_burst1 = 0x00000000, - regk_bif_dma_burst8 = 0x00000001, - regk_bif_dma_bw16 = 0x00000001, - regk_bif_dma_bw32 = 0x00000002, - regk_bif_dma_bw8 = 0x00000000, - regk_bif_dma_dack = 0x00000006, - regk_bif_dma_dack_inv = 0x00000007, - regk_bif_dma_force = 0x00000001, - regk_bif_dma_hi = 0x00000003, - regk_bif_dma_inv = 0x00000003, - regk_bif_dma_lo = 0x00000002, - regk_bif_dma_master = 0x00000001, - regk_bif_dma_no = 0x00000000, - regk_bif_dma_norm = 0x00000002, - regk_bif_dma_off = 0x00000000, - regk_bif_dma_rw_ch0_ctrl_default = 0x00000000, - regk_bif_dma_rw_ch0_start_default = 0x00000000, - regk_bif_dma_rw_ch1_ctrl_default = 0x00000000, - regk_bif_dma_rw_ch1_start_default = 0x00000000, - regk_bif_dma_rw_ch2_ctrl_default = 0x00000000, - regk_bif_dma_rw_ch2_start_default = 0x00000000, - regk_bif_dma_rw_ch3_ctrl_default = 0x00000000, - regk_bif_dma_rw_ch3_start_default = 0x00000000, - regk_bif_dma_rw_intr_mask_default = 0x00000000, - regk_bif_dma_rw_pin0_cfg_default = 0x00000000, - regk_bif_dma_rw_pin1_cfg_default = 0x00000000, - regk_bif_dma_rw_pin2_cfg_default = 0x00000000, - regk_bif_dma_rw_pin3_cfg_default = 0x00000000, - regk_bif_dma_rw_pin4_cfg_default = 0x00000000, - regk_bif_dma_rw_pin5_cfg_default = 0x00000000, - regk_bif_dma_rw_pin6_cfg_default = 0x00000000, - regk_bif_dma_rw_pin7_cfg_default = 0x00000000, - regk_bif_dma_slave = 0x00000002, - regk_bif_dma_sreq = 0x00000006, - regk_bif_dma_sreq_inv = 0x00000007, - regk_bif_dma_tc = 0x00000004, - regk_bif_dma_tc_inv = 0x00000005, - regk_bif_dma_yes = 0x00000001 -}; -#endif /* __bif_dma_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h b/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h deleted file mode 100644 index d18fc3c9f569..000000000000 --- a/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h +++ /dev/null @@ -1,249 +0,0 @@ -#ifndef __bif_slave_defs_h -#define __bif_slave_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_slave_regs.r - * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp - * last modfied: Mon Apr 11 16:06:34 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_slave_defs.h ../../inst/bif/rtl/bif_slave_regs.r - * id: $Id: bif_slave_defs.h,v 1.2 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope bif_slave */ - -/* Register rw_slave_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int slave_id : 3; - unsigned int use_slave_id : 1; - unsigned int boot_rdy : 1; - unsigned int loopback : 1; - unsigned int dis : 1; - unsigned int dummy1 : 25; -} reg_bif_slave_rw_slave_cfg; -#define REG_RD_ADDR_bif_slave_rw_slave_cfg 0 -#define REG_WR_ADDR_bif_slave_rw_slave_cfg 0 - -/* Register r_slave_mode, scope bif_slave, type r */ -typedef struct { - unsigned int ch0_mode : 1; - unsigned int ch1_mode : 1; - unsigned int ch2_mode : 1; - unsigned int ch3_mode : 1; - unsigned int dummy1 : 28; -} reg_bif_slave_r_slave_mode; -#define REG_RD_ADDR_bif_slave_r_slave_mode 4 - -/* Register rw_ch0_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int rd_hold : 2; - unsigned int access_mode : 1; - unsigned int access_ctrl : 1; - unsigned int data_cs : 2; - unsigned int dummy1 : 26; -} reg_bif_slave_rw_ch0_cfg; -#define REG_RD_ADDR_bif_slave_rw_ch0_cfg 16 -#define REG_WR_ADDR_bif_slave_rw_ch0_cfg 16 - -/* Register rw_ch1_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int rd_hold : 2; - unsigned int access_mode : 1; - unsigned int access_ctrl : 1; - unsigned int data_cs : 2; - unsigned int dummy1 : 26; -} reg_bif_slave_rw_ch1_cfg; -#define REG_RD_ADDR_bif_slave_rw_ch1_cfg 20 -#define REG_WR_ADDR_bif_slave_rw_ch1_cfg 20 - -/* Register rw_ch2_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int rd_hold : 2; - unsigned int access_mode : 1; - unsigned int access_ctrl : 1; - unsigned int data_cs : 2; - unsigned int dummy1 : 26; -} reg_bif_slave_rw_ch2_cfg; -#define REG_RD_ADDR_bif_slave_rw_ch2_cfg 24 -#define REG_WR_ADDR_bif_slave_rw_ch2_cfg 24 - -/* Register rw_ch3_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int rd_hold : 2; - unsigned int access_mode : 1; - unsigned int access_ctrl : 1; - unsigned int data_cs : 2; - unsigned int dummy1 : 26; -} reg_bif_slave_rw_ch3_cfg; -#define REG_RD_ADDR_bif_slave_rw_ch3_cfg 28 -#define REG_WR_ADDR_bif_slave_rw_ch3_cfg 28 - -/* Register rw_arb_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int brin_mode : 1; - unsigned int brout_mode : 3; - unsigned int bg_mode : 3; - unsigned int release : 2; - unsigned int acquire : 1; - unsigned int settle_time : 2; - unsigned int dram_ctrl : 1; - unsigned int dummy1 : 19; -} reg_bif_slave_rw_arb_cfg; -#define REG_RD_ADDR_bif_slave_rw_arb_cfg 32 -#define REG_WR_ADDR_bif_slave_rw_arb_cfg 32 - -/* Register r_arb_stat, scope bif_slave, type r */ -typedef struct { - unsigned int init_mode : 1; - unsigned int mode : 1; - unsigned int brin : 1; - unsigned int brout : 1; - unsigned int bg : 1; - unsigned int dummy1 : 27; -} reg_bif_slave_r_arb_stat; -#define REG_RD_ADDR_bif_slave_r_arb_stat 36 - -/* Register rw_intr_mask, scope bif_slave, type rw */ -typedef struct { - unsigned int bus_release : 1; - unsigned int bus_acquire : 1; - unsigned int dummy1 : 30; -} reg_bif_slave_rw_intr_mask; -#define REG_RD_ADDR_bif_slave_rw_intr_mask 64 -#define REG_WR_ADDR_bif_slave_rw_intr_mask 64 - -/* Register rw_ack_intr, scope bif_slave, type rw */ -typedef struct { - unsigned int bus_release : 1; - unsigned int bus_acquire : 1; - unsigned int dummy1 : 30; -} reg_bif_slave_rw_ack_intr; -#define REG_RD_ADDR_bif_slave_rw_ack_intr 68 -#define REG_WR_ADDR_bif_slave_rw_ack_intr 68 - -/* Register r_intr, scope bif_slave, type r */ -typedef struct { - unsigned int bus_release : 1; - unsigned int bus_acquire : 1; - unsigned int dummy1 : 30; -} reg_bif_slave_r_intr; -#define REG_RD_ADDR_bif_slave_r_intr 72 - -/* Register r_masked_intr, scope bif_slave, type r */ -typedef struct { - unsigned int bus_release : 1; - unsigned int bus_acquire : 1; - unsigned int dummy1 : 30; -} reg_bif_slave_r_masked_intr; -#define REG_RD_ADDR_bif_slave_r_masked_intr 76 - - -/* Constants */ -enum { - regk_bif_slave_active_hi = 0x00000003, - regk_bif_slave_active_lo = 0x00000002, - regk_bif_slave_addr = 0x00000000, - regk_bif_slave_always = 0x00000001, - regk_bif_slave_at_idle = 0x00000002, - regk_bif_slave_burst_end = 0x00000003, - regk_bif_slave_dma = 0x00000001, - regk_bif_slave_hi = 0x00000003, - regk_bif_slave_inv = 0x00000001, - regk_bif_slave_lo = 0x00000002, - regk_bif_slave_local = 0x00000001, - regk_bif_slave_master = 0x00000000, - regk_bif_slave_mode_reg = 0x00000001, - regk_bif_slave_no = 0x00000000, - regk_bif_slave_norm = 0x00000000, - regk_bif_slave_on_access = 0x00000000, - regk_bif_slave_rw_arb_cfg_default = 0x00000000, - regk_bif_slave_rw_ch0_cfg_default = 0x00000000, - regk_bif_slave_rw_ch1_cfg_default = 0x00000000, - regk_bif_slave_rw_ch2_cfg_default = 0x00000000, - regk_bif_slave_rw_ch3_cfg_default = 0x00000000, - regk_bif_slave_rw_intr_mask_default = 0x00000000, - regk_bif_slave_rw_slave_cfg_default = 0x00000000, - regk_bif_slave_shared = 0x00000000, - regk_bif_slave_slave = 0x00000001, - regk_bif_slave_t0ns = 0x00000003, - regk_bif_slave_t10ns = 0x00000002, - regk_bif_slave_t20ns = 0x00000003, - regk_bif_slave_t30ns = 0x00000002, - regk_bif_slave_t40ns = 0x00000001, - regk_bif_slave_t50ns = 0x00000000, - regk_bif_slave_yes = 0x00000001, - regk_bif_slave_z = 0x00000004 -}; -#endif /* __bif_slave_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/config_defs.h b/include/asm-cris/arch-v32/hwregs/config_defs.h deleted file mode 100644 index 45457a4e3817..000000000000 --- a/include/asm-cris/arch-v32/hwregs/config_defs.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef __config_defs_h -#define __config_defs_h - -/* - * This file is autogenerated from - * file: ../../rtl/config_regs.r - * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp - * last modfied: Thu Mar 4 12:34:39 2004 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile config_defs.h ../../rtl/config_regs.r - * id: $Id: config_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope config */ - -/* Register r_bootsel, scope config, type r */ -typedef struct { - unsigned int boot_mode : 3; - unsigned int full_duplex : 1; - unsigned int user : 1; - unsigned int pll : 1; - unsigned int flash_bw : 1; - unsigned int dummy1 : 25; -} reg_config_r_bootsel; -#define REG_RD_ADDR_config_r_bootsel 0 - -/* Register rw_clk_ctrl, scope config, type rw */ -typedef struct { - unsigned int pll : 1; - unsigned int cpu : 1; - unsigned int iop : 1; - unsigned int dma01_eth0 : 1; - unsigned int dma23 : 1; - unsigned int dma45 : 1; - unsigned int dma67 : 1; - unsigned int dma89_strcop : 1; - unsigned int bif : 1; - unsigned int fix_io : 1; - unsigned int dummy1 : 22; -} reg_config_rw_clk_ctrl; -#define REG_RD_ADDR_config_rw_clk_ctrl 4 -#define REG_WR_ADDR_config_rw_clk_ctrl 4 - -/* Register rw_pad_ctrl, scope config, type rw */ -typedef struct { - unsigned int usb_susp : 1; - unsigned int phyrst_n : 1; - unsigned int dummy1 : 30; -} reg_config_rw_pad_ctrl; -#define REG_RD_ADDR_config_rw_pad_ctrl 8 -#define REG_WR_ADDR_config_rw_pad_ctrl 8 - - -/* Constants */ -enum { - regk_config_bw16 = 0x00000000, - regk_config_bw32 = 0x00000001, - regk_config_master = 0x00000005, - regk_config_nand = 0x00000003, - regk_config_net_rx = 0x00000001, - regk_config_net_tx_rx = 0x00000002, - regk_config_no = 0x00000000, - regk_config_none = 0x00000007, - regk_config_nor = 0x00000000, - regk_config_rw_clk_ctrl_default = 0x00000002, - regk_config_rw_pad_ctrl_default = 0x00000000, - regk_config_ser = 0x00000004, - regk_config_slave = 0x00000006, - regk_config_yes = 0x00000001 -}; -#endif /* __config_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/cpu_vect.h b/include/asm-cris/arch-v32/hwregs/cpu_vect.h deleted file mode 100644 index 8370aee8a14a..000000000000 --- a/include/asm-cris/arch-v32/hwregs/cpu_vect.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version - from ../../inst/crisp/doc/cpu_vect.r -version . */ - -#ifndef _______INST_CRISP_DOC_CPU_VECT_R -#define _______INST_CRISP_DOC_CPU_VECT_R -#define NMI_INTR_VECT 0x00 -#define RESERVED_1_INTR_VECT 0x01 -#define RESERVED_2_INTR_VECT 0x02 -#define SINGLE_STEP_INTR_VECT 0x03 -#define INSTR_TLB_REFILL_INTR_VECT 0x04 -#define INSTR_TLB_INV_INTR_VECT 0x05 -#define INSTR_TLB_ACC_INTR_VECT 0x06 -#define TLB_EX_INTR_VECT 0x07 -#define DATA_TLB_REFILL_INTR_VECT 0x08 -#define DATA_TLB_INV_INTR_VECT 0x09 -#define DATA_TLB_ACC_INTR_VECT 0x0a -#define DATA_TLB_WE_INTR_VECT 0x0b -#define HW_BP_INTR_VECT 0x0c -#define RESERVED_D_INTR_VECT 0x0d -#define RESERVED_E_INTR_VECT 0x0e -#define RESERVED_F_INTR_VECT 0x0f -#define BREAK_0_INTR_VECT 0x10 -#define BREAK_1_INTR_VECT 0x11 -#define BREAK_2_INTR_VECT 0x12 -#define BREAK_3_INTR_VECT 0x13 -#define BREAK_4_INTR_VECT 0x14 -#define BREAK_5_INTR_VECT 0x15 -#define BREAK_6_INTR_VECT 0x16 -#define BREAK_7_INTR_VECT 0x17 -#define BREAK_8_INTR_VECT 0x18 -#define BREAK_9_INTR_VECT 0x19 -#define BREAK_10_INTR_VECT 0x1a -#define BREAK_11_INTR_VECT 0x1b -#define BREAK_12_INTR_VECT 0x1c -#define BREAK_13_INTR_VECT 0x1d -#define BREAK_14_INTR_VECT 0x1e -#define BREAK_15_INTR_VECT 0x1f -#define MULTIPLE_INTR_VECT 0x30 - -#endif diff --git a/include/asm-cris/arch-v32/hwregs/dma.h b/include/asm-cris/arch-v32/hwregs/dma.h deleted file mode 100644 index 3ce322b5c731..000000000000 --- a/include/asm-cris/arch-v32/hwregs/dma.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * DMA C definitions and help macros - * - */ - -#ifndef dma_h -#define dma_h - -/* registers */ /* Really needed, since both are listed in sw.list? */ -#include "dma_defs.h" - - -/* descriptors */ - -// ------------------------------------------------------------ dma_descr_group -typedef struct dma_descr_group { - struct dma_descr_group *next; - unsigned eol : 1; - unsigned tol : 1; - unsigned bol : 1; - unsigned : 1; - unsigned intr : 1; - unsigned : 2; - unsigned en : 1; - unsigned : 7; - unsigned dis : 1; - unsigned md : 16; - struct dma_descr_group *up; - union { - struct dma_descr_context *context; - struct dma_descr_group *group; - } down; -} dma_descr_group; - -// ---------------------------------------------------------- dma_descr_context -typedef struct dma_descr_context { - struct dma_descr_context *next; - unsigned eol : 1; - unsigned : 3; - unsigned intr : 1; - unsigned : 1; - unsigned store_mode : 1; - unsigned en : 1; - unsigned : 7; - unsigned dis : 1; - unsigned md0 : 16; - unsigned md1; - unsigned md2; - unsigned md3; - unsigned md4; - struct dma_descr_data *saved_data; - char *saved_data_buf; -} dma_descr_context; - -// ------------------------------------------------------------- dma_descr_data -typedef struct dma_descr_data { - struct dma_descr_data *next; - char *buf; - unsigned eol : 1; - unsigned : 2; - unsigned out_eop : 1; - unsigned intr : 1; - unsigned wait : 1; - unsigned : 2; - unsigned : 3; - unsigned in_eop : 1; - unsigned : 4; - unsigned md : 16; - char *after; -} dma_descr_data; - -// --------------------------------------------------------------------- macros - -// enable DMA channel -#define DMA_ENABLE( inst ) \ - do { reg_dma_rw_cfg e = REG_RD( dma, inst, rw_cfg );\ - e.en = regk_dma_yes; \ - REG_WR( dma, inst, rw_cfg, e); } while( 0 ) - -// reset DMA channel -#define DMA_RESET( inst ) \ - do { reg_dma_rw_cfg r = REG_RD( dma, inst, rw_cfg );\ - r.en = regk_dma_no; \ - REG_WR( dma, inst, rw_cfg, r); } while( 0 ) - -// stop DMA channel -#define DMA_STOP( inst ) \ - do { reg_dma_rw_cfg s = REG_RD( dma, inst, rw_cfg );\ - s.stop = regk_dma_yes; \ - REG_WR( dma, inst, rw_cfg, s); } while( 0 ) - -// continue DMA channel operation -#define DMA_CONTINUE( inst ) \ - do { reg_dma_rw_cfg c = REG_RD( dma, inst, rw_cfg );\ - c.stop = regk_dma_no; \ - REG_WR( dma, inst, rw_cfg, c); } while( 0 ) - -// give stream command -#define DMA_WR_CMD( inst, cmd_par ) \ - do { reg_dma_rw_stream_cmd __x = {0}; \ - do { __x = REG_RD(dma, inst, rw_stream_cmd); } while (__x.busy); \ - __x.cmd = (cmd_par); \ - REG_WR(dma, inst, rw_stream_cmd, __x); \ - } while (0) - -// load: g,c,d:burst -#define DMA_START_GROUP( inst, group_descr ) \ - do { REG_WR_INT( dma, inst, rw_group, (int) group_descr ); \ - DMA_WR_CMD( inst, regk_dma_load_g ); \ - DMA_WR_CMD( inst, regk_dma_load_c ); \ - DMA_WR_CMD( inst, regk_dma_load_d | regk_dma_burst ); \ - } while( 0 ) - -// load: c,d:burst -#define DMA_START_CONTEXT( inst, ctx_descr ) \ - do { REG_WR_INT( dma, inst, rw_group_down, (int) ctx_descr ); \ - DMA_WR_CMD( inst, regk_dma_load_c ); \ - DMA_WR_CMD( inst, regk_dma_load_d | regk_dma_burst ); \ - } while( 0 ) - -// if the DMA is at the end of the data list, the last data descr is reloaded -#define DMA_CONTINUE_DATA( inst ) \ -do { reg_dma_rw_cmd c = {0}; \ - c.cont_data = regk_dma_yes;\ - REG_WR( dma, inst, rw_cmd, c ); } while( 0 ) - -#endif diff --git a/include/asm-cris/arch-v32/hwregs/dma_defs.h b/include/asm-cris/arch-v32/hwregs/dma_defs.h deleted file mode 100644 index 48ac8cef7ebe..000000000000 --- a/include/asm-cris/arch-v32/hwregs/dma_defs.h +++ /dev/null @@ -1,436 +0,0 @@ -#ifndef __dma_defs_h -#define __dma_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/dma/inst/dma_common/rtl/dma_regdes.r - * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp - * last modfied: Mon Apr 11 16:06:51 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile dma_defs.h ../../inst/dma/inst/dma_common/rtl/dma_regdes.r - * id: $Id: dma_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope dma */ - -/* Register rw_data, scope dma, type rw */ -typedef unsigned int reg_dma_rw_data; -#define REG_RD_ADDR_dma_rw_data 0 -#define REG_WR_ADDR_dma_rw_data 0 - -/* Register rw_data_next, scope dma, type rw */ -typedef unsigned int reg_dma_rw_data_next; -#define REG_RD_ADDR_dma_rw_data_next 4 -#define REG_WR_ADDR_dma_rw_data_next 4 - -/* Register rw_data_buf, scope dma, type rw */ -typedef unsigned int reg_dma_rw_data_buf; -#define REG_RD_ADDR_dma_rw_data_buf 8 -#define REG_WR_ADDR_dma_rw_data_buf 8 - -/* Register rw_data_ctrl, scope dma, type rw */ -typedef struct { - unsigned int eol : 1; - unsigned int dummy1 : 2; - unsigned int out_eop : 1; - unsigned int intr : 1; - unsigned int wait : 1; - unsigned int dummy2 : 26; -} reg_dma_rw_data_ctrl; -#define REG_RD_ADDR_dma_rw_data_ctrl 12 -#define REG_WR_ADDR_dma_rw_data_ctrl 12 - -/* Register rw_data_stat, scope dma, type rw */ -typedef struct { - unsigned int dummy1 : 3; - unsigned int in_eop : 1; - unsigned int dummy2 : 28; -} reg_dma_rw_data_stat; -#define REG_RD_ADDR_dma_rw_data_stat 16 -#define REG_WR_ADDR_dma_rw_data_stat 16 - -/* Register rw_data_md, scope dma, type rw */ -typedef struct { - unsigned int md : 16; - unsigned int dummy1 : 16; -} reg_dma_rw_data_md; -#define REG_RD_ADDR_dma_rw_data_md 20 -#define REG_WR_ADDR_dma_rw_data_md 20 - -/* Register rw_data_md_s, scope dma, type rw */ -typedef struct { - unsigned int md_s : 16; - unsigned int dummy1 : 16; -} reg_dma_rw_data_md_s; -#define REG_RD_ADDR_dma_rw_data_md_s 24 -#define REG_WR_ADDR_dma_rw_data_md_s 24 - -/* Register rw_data_after, scope dma, type rw */ -typedef unsigned int reg_dma_rw_data_after; -#define REG_RD_ADDR_dma_rw_data_after 28 -#define REG_WR_ADDR_dma_rw_data_after 28 - -/* Register rw_ctxt, scope dma, type rw */ -typedef unsigned int reg_dma_rw_ctxt; -#define REG_RD_ADDR_dma_rw_ctxt 32 -#define REG_WR_ADDR_dma_rw_ctxt 32 - -/* Register rw_ctxt_next, scope dma, type rw */ -typedef unsigned int reg_dma_rw_ctxt_next; -#define REG_RD_ADDR_dma_rw_ctxt_next 36 -#define REG_WR_ADDR_dma_rw_ctxt_next 36 - -/* Register rw_ctxt_ctrl, scope dma, type rw */ -typedef struct { - unsigned int eol : 1; - unsigned int dummy1 : 3; - unsigned int intr : 1; - unsigned int dummy2 : 1; - unsigned int store_mode : 1; - unsigned int en : 1; - unsigned int dummy3 : 24; -} reg_dma_rw_ctxt_ctrl; -#define REG_RD_ADDR_dma_rw_ctxt_ctrl 40 -#define REG_WR_ADDR_dma_rw_ctxt_ctrl 40 - -/* Register rw_ctxt_stat, scope dma, type rw */ -typedef struct { - unsigned int dummy1 : 7; - unsigned int dis : 1; - unsigned int dummy2 : 24; -} reg_dma_rw_ctxt_stat; -#define REG_RD_ADDR_dma_rw_ctxt_stat 44 -#define REG_WR_ADDR_dma_rw_ctxt_stat 44 - -/* Register rw_ctxt_md0, scope dma, type rw */ -typedef struct { - unsigned int md0 : 16; - unsigned int dummy1 : 16; -} reg_dma_rw_ctxt_md0; -#define REG_RD_ADDR_dma_rw_ctxt_md0 48 -#define REG_WR_ADDR_dma_rw_ctxt_md0 48 - -/* Register rw_ctxt_md0_s, scope dma, type rw */ -typedef struct { - unsigned int md0_s : 16; - unsigned int dummy1 : 16; -} reg_dma_rw_ctxt_md0_s; -#define REG_RD_ADDR_dma_rw_ctxt_md0_s 52 -#define REG_WR_ADDR_dma_rw_ctxt_md0_s 52 - -/* Register rw_ctxt_md1, scope dma, type rw */ -typedef unsigned int reg_dma_rw_ctxt_md1; -#define REG_RD_ADDR_dma_rw_ctxt_md1 56 -#define REG_WR_ADDR_dma_rw_ctxt_md1 56 - -/* Register rw_ctxt_md1_s, scope dma, type rw */ -typedef unsigned int reg_dma_rw_ctxt_md1_s; -#define REG_RD_ADDR_dma_rw_ctxt_md1_s 60 -#define REG_WR_ADDR_dma_rw_ctxt_md1_s 60 - -/* Register rw_ctxt_md2, scope dma, type rw */ -typedef unsigned int reg_dma_rw_ctxt_md2; -#define REG_RD_ADDR_dma_rw_ctxt_md2 64 -#define REG_WR_ADDR_dma_rw_ctxt_md2 64 - -/* Register rw_ctxt_md2_s, scope dma, type rw */ -typedef unsigned int reg_dma_rw_ctxt_md2_s; -#define REG_RD_ADDR_dma_rw_ctxt_md2_s 68 -#define REG_WR_ADDR_dma_rw_ctxt_md2_s 68 - -/* Register rw_ctxt_md3, scope dma, type rw */ -typedef unsigned int reg_dma_rw_ctxt_md3; -#define REG_RD_ADDR_dma_rw_ctxt_md3 72 -#define REG_WR_ADDR_dma_rw_ctxt_md3 72 - -/* Register rw_ctxt_md3_s, scope dma, type rw */ -typedef unsigned int reg_dma_rw_ctxt_md3_s; -#define REG_RD_ADDR_dma_rw_ctxt_md3_s 76 -#define REG_WR_ADDR_dma_rw_ctxt_md3_s 76 - -/* Register rw_ctxt_md4, scope dma, type rw */ -typedef unsigned int reg_dma_rw_ctxt_md4; -#define REG_RD_ADDR_dma_rw_ctxt_md4 80 -#define REG_WR_ADDR_dma_rw_ctxt_md4 80 - -/* Register rw_ctxt_md4_s, scope dma, type rw */ -typedef unsigned int reg_dma_rw_ctxt_md4_s; -#define REG_RD_ADDR_dma_rw_ctxt_md4_s 84 -#define REG_WR_ADDR_dma_rw_ctxt_md4_s 84 - -/* Register rw_saved_data, scope dma, type rw */ -typedef unsigned int reg_dma_rw_saved_data; -#define REG_RD_ADDR_dma_rw_saved_data 88 -#define REG_WR_ADDR_dma_rw_saved_data 88 - -/* Register rw_saved_data_buf, scope dma, type rw */ -typedef unsigned int reg_dma_rw_saved_data_buf; -#define REG_RD_ADDR_dma_rw_saved_data_buf 92 -#define REG_WR_ADDR_dma_rw_saved_data_buf 92 - -/* Register rw_group, scope dma, type rw */ -typedef unsigned int reg_dma_rw_group; -#define REG_RD_ADDR_dma_rw_group 96 -#define REG_WR_ADDR_dma_rw_group 96 - -/* Register rw_group_next, scope dma, type rw */ -typedef unsigned int reg_dma_rw_group_next; -#define REG_RD_ADDR_dma_rw_group_next 100 -#define REG_WR_ADDR_dma_rw_group_next 100 - -/* Register rw_group_ctrl, scope dma, type rw */ -typedef struct { - unsigned int eol : 1; - unsigned int tol : 1; - unsigned int bol : 1; - unsigned int dummy1 : 1; - unsigned int intr : 1; - unsigned int dummy2 : 2; - unsigned int en : 1; - unsigned int dummy3 : 24; -} reg_dma_rw_group_ctrl; -#define REG_RD_ADDR_dma_rw_group_ctrl 104 -#define REG_WR_ADDR_dma_rw_group_ctrl 104 - -/* Register rw_group_stat, scope dma, type rw */ -typedef struct { - unsigned int dummy1 : 7; - unsigned int dis : 1; - unsigned int dummy2 : 24; -} reg_dma_rw_group_stat; -#define REG_RD_ADDR_dma_rw_group_stat 108 -#define REG_WR_ADDR_dma_rw_group_stat 108 - -/* Register rw_group_md, scope dma, type rw */ -typedef struct { - unsigned int md : 16; - unsigned int dummy1 : 16; -} reg_dma_rw_group_md; -#define REG_RD_ADDR_dma_rw_group_md 112 -#define REG_WR_ADDR_dma_rw_group_md 112 - -/* Register rw_group_md_s, scope dma, type rw */ -typedef struct { - unsigned int md_s : 16; - unsigned int dummy1 : 16; -} reg_dma_rw_group_md_s; -#define REG_RD_ADDR_dma_rw_group_md_s 116 -#define REG_WR_ADDR_dma_rw_group_md_s 116 - -/* Register rw_group_up, scope dma, type rw */ -typedef unsigned int reg_dma_rw_group_up; -#define REG_RD_ADDR_dma_rw_group_up 120 -#define REG_WR_ADDR_dma_rw_group_up 120 - -/* Register rw_group_down, scope dma, type rw */ -typedef unsigned int reg_dma_rw_group_down; -#define REG_RD_ADDR_dma_rw_group_down 124 -#define REG_WR_ADDR_dma_rw_group_down 124 - -/* Register rw_cmd, scope dma, type rw */ -typedef struct { - unsigned int cont_data : 1; - unsigned int dummy1 : 31; -} reg_dma_rw_cmd; -#define REG_RD_ADDR_dma_rw_cmd 128 -#define REG_WR_ADDR_dma_rw_cmd 128 - -/* Register rw_cfg, scope dma, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int stop : 1; - unsigned int dummy1 : 30; -} reg_dma_rw_cfg; -#define REG_RD_ADDR_dma_rw_cfg 132 -#define REG_WR_ADDR_dma_rw_cfg 132 - -/* Register rw_stat, scope dma, type rw */ -typedef struct { - unsigned int mode : 5; - unsigned int list_state : 3; - unsigned int stream_cmd_src : 8; - unsigned int dummy1 : 8; - unsigned int buf : 8; -} reg_dma_rw_stat; -#define REG_RD_ADDR_dma_rw_stat 136 -#define REG_WR_ADDR_dma_rw_stat 136 - -/* Register rw_intr_mask, scope dma, type rw */ -typedef struct { - unsigned int group : 1; - unsigned int ctxt : 1; - unsigned int data : 1; - unsigned int in_eop : 1; - unsigned int stream_cmd : 1; - unsigned int dummy1 : 27; -} reg_dma_rw_intr_mask; -#define REG_RD_ADDR_dma_rw_intr_mask 140 -#define REG_WR_ADDR_dma_rw_intr_mask 140 - -/* Register rw_ack_intr, scope dma, type rw */ -typedef struct { - unsigned int group : 1; - unsigned int ctxt : 1; - unsigned int data : 1; - unsigned int in_eop : 1; - unsigned int stream_cmd : 1; - unsigned int dummy1 : 27; -} reg_dma_rw_ack_intr; -#define REG_RD_ADDR_dma_rw_ack_intr 144 -#define REG_WR_ADDR_dma_rw_ack_intr 144 - -/* Register r_intr, scope dma, type r */ -typedef struct { - unsigned int group : 1; - unsigned int ctxt : 1; - unsigned int data : 1; - unsigned int in_eop : 1; - unsigned int stream_cmd : 1; - unsigned int dummy1 : 27; -} reg_dma_r_intr; -#define REG_RD_ADDR_dma_r_intr 148 - -/* Register r_masked_intr, scope dma, type r */ -typedef struct { - unsigned int group : 1; - unsigned int ctxt : 1; - unsigned int data : 1; - unsigned int in_eop : 1; - unsigned int stream_cmd : 1; - unsigned int dummy1 : 27; -} reg_dma_r_masked_intr; -#define REG_RD_ADDR_dma_r_masked_intr 152 - -/* Register rw_stream_cmd, scope dma, type rw */ -typedef struct { - unsigned int cmd : 10; - unsigned int dummy1 : 6; - unsigned int n : 8; - unsigned int dummy2 : 7; - unsigned int busy : 1; -} reg_dma_rw_stream_cmd; -#define REG_RD_ADDR_dma_rw_stream_cmd 156 -#define REG_WR_ADDR_dma_rw_stream_cmd 156 - - -/* Constants */ -enum { - regk_dma_ack_pkt = 0x00000100, - regk_dma_anytime = 0x00000001, - regk_dma_array = 0x00000008, - regk_dma_burst = 0x00000020, - regk_dma_client = 0x00000002, - regk_dma_copy_next = 0x00000010, - regk_dma_copy_up = 0x00000020, - regk_dma_data_at_eol = 0x00000001, - regk_dma_dis_c = 0x00000010, - regk_dma_dis_g = 0x00000020, - regk_dma_idle = 0x00000001, - regk_dma_intern = 0x00000004, - regk_dma_load_c = 0x00000200, - regk_dma_load_c_n = 0x00000280, - regk_dma_load_c_next = 0x00000240, - regk_dma_load_d = 0x00000140, - regk_dma_load_g = 0x00000300, - regk_dma_load_g_down = 0x000003c0, - regk_dma_load_g_next = 0x00000340, - regk_dma_load_g_up = 0x00000380, - regk_dma_next_en = 0x00000010, - regk_dma_next_pkt = 0x00000010, - regk_dma_no = 0x00000000, - regk_dma_only_at_wait = 0x00000000, - regk_dma_restore = 0x00000020, - regk_dma_rst = 0x00000001, - regk_dma_running = 0x00000004, - regk_dma_rw_cfg_default = 0x00000000, - regk_dma_rw_cmd_default = 0x00000000, - regk_dma_rw_intr_mask_default = 0x00000000, - regk_dma_rw_stat_default = 0x00000101, - regk_dma_rw_stream_cmd_default = 0x00000000, - regk_dma_save_down = 0x00000020, - regk_dma_save_up = 0x00000020, - regk_dma_set_reg = 0x00000050, - regk_dma_set_w_size1 = 0x00000190, - regk_dma_set_w_size2 = 0x000001a0, - regk_dma_set_w_size4 = 0x000001c0, - regk_dma_stopped = 0x00000002, - regk_dma_store_c = 0x00000002, - regk_dma_store_descr = 0x00000000, - regk_dma_store_g = 0x00000004, - regk_dma_store_md = 0x00000001, - regk_dma_sw = 0x00000008, - regk_dma_update_down = 0x00000020, - regk_dma_yes = 0x00000001 -}; -#endif /* __dma_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/eth_defs.h b/include/asm-cris/arch-v32/hwregs/eth_defs.h deleted file mode 100644 index 90fe8a28894f..000000000000 --- a/include/asm-cris/arch-v32/hwregs/eth_defs.h +++ /dev/null @@ -1,378 +0,0 @@ -#ifndef __eth_defs_h -#define __eth_defs_h - -/* - * This file is autogenerated from - * file: eth.r - * id: eth_regs.r,v 1.16 2005/05/20 15:41:22 perz Exp - * last modfied: Mon Jan 9 06:06:41 2006 - * - * by /n/asic/design/tools/rdesc/rdes2c eth.r - * id: $Id: eth_defs.h,v 1.7 2006/01/26 13:45:30 karljope Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope eth */ - -/* Register rw_ma0_lo, scope eth, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_eth_rw_ma0_lo; -#define REG_RD_ADDR_eth_rw_ma0_lo 0 -#define REG_WR_ADDR_eth_rw_ma0_lo 0 - -/* Register rw_ma0_hi, scope eth, type rw */ -typedef struct { - unsigned int addr : 16; - unsigned int dummy1 : 16; -} reg_eth_rw_ma0_hi; -#define REG_RD_ADDR_eth_rw_ma0_hi 4 -#define REG_WR_ADDR_eth_rw_ma0_hi 4 - -/* Register rw_ma1_lo, scope eth, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_eth_rw_ma1_lo; -#define REG_RD_ADDR_eth_rw_ma1_lo 8 -#define REG_WR_ADDR_eth_rw_ma1_lo 8 - -/* Register rw_ma1_hi, scope eth, type rw */ -typedef struct { - unsigned int addr : 16; - unsigned int dummy1 : 16; -} reg_eth_rw_ma1_hi; -#define REG_RD_ADDR_eth_rw_ma1_hi 12 -#define REG_WR_ADDR_eth_rw_ma1_hi 12 - -/* Register rw_ga_lo, scope eth, type rw */ -typedef struct { - unsigned int tbl : 32; -} reg_eth_rw_ga_lo; -#define REG_RD_ADDR_eth_rw_ga_lo 16 -#define REG_WR_ADDR_eth_rw_ga_lo 16 - -/* Register rw_ga_hi, scope eth, type rw */ -typedef struct { - unsigned int tbl : 32; -} reg_eth_rw_ga_hi; -#define REG_RD_ADDR_eth_rw_ga_hi 20 -#define REG_WR_ADDR_eth_rw_ga_hi 20 - -/* Register rw_gen_ctrl, scope eth, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int phy : 2; - unsigned int protocol : 1; - unsigned int loopback : 1; - unsigned int flow_ctrl : 1; - unsigned int gtxclk_out : 1; - unsigned int phyrst_n : 1; - unsigned int dummy1 : 24; -} reg_eth_rw_gen_ctrl; -#define REG_RD_ADDR_eth_rw_gen_ctrl 24 -#define REG_WR_ADDR_eth_rw_gen_ctrl 24 - -/* Register rw_rec_ctrl, scope eth, type rw */ -typedef struct { - unsigned int ma0 : 1; - unsigned int ma1 : 1; - unsigned int individual : 1; - unsigned int broadcast : 1; - unsigned int undersize : 1; - unsigned int oversize : 1; - unsigned int bad_crc : 1; - unsigned int duplex : 1; - unsigned int max_size : 16; - unsigned int dummy1 : 8; -} reg_eth_rw_rec_ctrl; -#define REG_RD_ADDR_eth_rw_rec_ctrl 28 -#define REG_WR_ADDR_eth_rw_rec_ctrl 28 - -/* Register rw_tr_ctrl, scope eth, type rw */ -typedef struct { - unsigned int crc : 1; - unsigned int pad : 1; - unsigned int retry : 1; - unsigned int ignore_col : 1; - unsigned int cancel : 1; - unsigned int hsh_delay : 1; - unsigned int ignore_crs : 1; - unsigned int carrier_ext : 1; - unsigned int dummy1 : 24; -} reg_eth_rw_tr_ctrl; -#define REG_RD_ADDR_eth_rw_tr_ctrl 32 -#define REG_WR_ADDR_eth_rw_tr_ctrl 32 - -/* Register rw_clr_err, scope eth, type rw */ -typedef struct { - unsigned int clr : 1; - unsigned int dummy1 : 31; -} reg_eth_rw_clr_err; -#define REG_RD_ADDR_eth_rw_clr_err 36 -#define REG_WR_ADDR_eth_rw_clr_err 36 - -/* Register rw_mgm_ctrl, scope eth, type rw */ -typedef struct { - unsigned int mdio : 1; - unsigned int mdoe : 1; - unsigned int mdc : 1; - unsigned int dummy1 : 29; -} reg_eth_rw_mgm_ctrl; -#define REG_RD_ADDR_eth_rw_mgm_ctrl 40 -#define REG_WR_ADDR_eth_rw_mgm_ctrl 40 - -/* Register r_stat, scope eth, type r */ -typedef struct { - unsigned int mdio : 1; - unsigned int exc_col : 1; - unsigned int urun : 1; - unsigned int clk_125 : 1; - unsigned int dummy1 : 28; -} reg_eth_r_stat; -#define REG_RD_ADDR_eth_r_stat 44 - -/* Register rs_rec_cnt, scope eth, type rs */ -typedef struct { - unsigned int crc_err : 8; - unsigned int align_err : 8; - unsigned int oversize : 8; - unsigned int congestion : 8; -} reg_eth_rs_rec_cnt; -#define REG_RD_ADDR_eth_rs_rec_cnt 48 - -/* Register r_rec_cnt, scope eth, type r */ -typedef struct { - unsigned int crc_err : 8; - unsigned int align_err : 8; - unsigned int oversize : 8; - unsigned int congestion : 8; -} reg_eth_r_rec_cnt; -#define REG_RD_ADDR_eth_r_rec_cnt 52 - -/* Register rs_tr_cnt, scope eth, type rs */ -typedef struct { - unsigned int single_col : 8; - unsigned int mult_col : 8; - unsigned int late_col : 8; - unsigned int deferred : 8; -} reg_eth_rs_tr_cnt; -#define REG_RD_ADDR_eth_rs_tr_cnt 56 - -/* Register r_tr_cnt, scope eth, type r */ -typedef struct { - unsigned int single_col : 8; - unsigned int mult_col : 8; - unsigned int late_col : 8; - unsigned int deferred : 8; -} reg_eth_r_tr_cnt; -#define REG_RD_ADDR_eth_r_tr_cnt 60 - -/* Register rs_phy_cnt, scope eth, type rs */ -typedef struct { - unsigned int carrier_loss : 8; - unsigned int sqe_err : 8; - unsigned int dummy1 : 16; -} reg_eth_rs_phy_cnt; -#define REG_RD_ADDR_eth_rs_phy_cnt 64 - -/* Register r_phy_cnt, scope eth, type r */ -typedef struct { - unsigned int carrier_loss : 8; - unsigned int sqe_err : 8; - unsigned int dummy1 : 16; -} reg_eth_r_phy_cnt; -#define REG_RD_ADDR_eth_r_phy_cnt 68 - -/* Register rw_test_ctrl, scope eth, type rw */ -typedef struct { - unsigned int snmp_inc : 1; - unsigned int snmp : 1; - unsigned int backoff : 1; - unsigned int dummy1 : 29; -} reg_eth_rw_test_ctrl; -#define REG_RD_ADDR_eth_rw_test_ctrl 72 -#define REG_WR_ADDR_eth_rw_test_ctrl 72 - -/* Register rw_intr_mask, scope eth, type rw */ -typedef struct { - unsigned int crc : 1; - unsigned int align : 1; - unsigned int oversize : 1; - unsigned int congestion : 1; - unsigned int single_col : 1; - unsigned int mult_col : 1; - unsigned int late_col : 1; - unsigned int deferred : 1; - unsigned int carrier_loss : 1; - unsigned int sqe_test_err : 1; - unsigned int orun : 1; - unsigned int urun : 1; - unsigned int exc_col : 1; - unsigned int mdio : 1; - unsigned int dummy1 : 18; -} reg_eth_rw_intr_mask; -#define REG_RD_ADDR_eth_rw_intr_mask 76 -#define REG_WR_ADDR_eth_rw_intr_mask 76 - -/* Register rw_ack_intr, scope eth, type rw */ -typedef struct { - unsigned int crc : 1; - unsigned int align : 1; - unsigned int oversize : 1; - unsigned int congestion : 1; - unsigned int single_col : 1; - unsigned int mult_col : 1; - unsigned int late_col : 1; - unsigned int deferred : 1; - unsigned int carrier_loss : 1; - unsigned int sqe_test_err : 1; - unsigned int orun : 1; - unsigned int urun : 1; - unsigned int exc_col : 1; - unsigned int mdio : 1; - unsigned int dummy1 : 18; -} reg_eth_rw_ack_intr; -#define REG_RD_ADDR_eth_rw_ack_intr 80 -#define REG_WR_ADDR_eth_rw_ack_intr 80 - -/* Register r_intr, scope eth, type r */ -typedef struct { - unsigned int crc : 1; - unsigned int align : 1; - unsigned int oversize : 1; - unsigned int congestion : 1; - unsigned int single_col : 1; - unsigned int mult_col : 1; - unsigned int late_col : 1; - unsigned int deferred : 1; - unsigned int carrier_loss : 1; - unsigned int sqe_test_err : 1; - unsigned int orun : 1; - unsigned int urun : 1; - unsigned int exc_col : 1; - unsigned int mdio : 1; - unsigned int dummy1 : 18; -} reg_eth_r_intr; -#define REG_RD_ADDR_eth_r_intr 84 - -/* Register r_masked_intr, scope eth, type r */ -typedef struct { - unsigned int crc : 1; - unsigned int align : 1; - unsigned int oversize : 1; - unsigned int congestion : 1; - unsigned int single_col : 1; - unsigned int mult_col : 1; - unsigned int late_col : 1; - unsigned int deferred : 1; - unsigned int carrier_loss : 1; - unsigned int sqe_test_err : 1; - unsigned int orun : 1; - unsigned int urun : 1; - unsigned int exc_col : 1; - unsigned int mdio : 1; - unsigned int dummy1 : 18; -} reg_eth_r_masked_intr; -#define REG_RD_ADDR_eth_r_masked_intr 88 - - -/* Constants */ -enum { - regk_eth_discard = 0x00000000, - regk_eth_ether = 0x00000000, - regk_eth_full = 0x00000001, - regk_eth_gmii = 0x00000003, - regk_eth_gtxclk = 0x00000001, - regk_eth_half = 0x00000000, - regk_eth_hsh = 0x00000001, - regk_eth_mii = 0x00000001, - regk_eth_mii_arec = 0x00000002, - regk_eth_mii_clk = 0x00000000, - regk_eth_no = 0x00000000, - regk_eth_phyrst = 0x00000000, - regk_eth_rec = 0x00000001, - regk_eth_rw_ga_hi_default = 0x00000000, - regk_eth_rw_ga_lo_default = 0x00000000, - regk_eth_rw_gen_ctrl_default = 0x00000000, - regk_eth_rw_intr_mask_default = 0x00000000, - regk_eth_rw_ma0_hi_default = 0x00000000, - regk_eth_rw_ma0_lo_default = 0x00000000, - regk_eth_rw_ma1_hi_default = 0x00000000, - regk_eth_rw_ma1_lo_default = 0x00000000, - regk_eth_rw_mgm_ctrl_default = 0x00000000, - regk_eth_rw_test_ctrl_default = 0x00000000, - regk_eth_size1518 = 0x000005ee, - regk_eth_size1522 = 0x000005f2, - regk_eth_yes = 0x00000001 -}; -#endif /* __eth_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/extmem_defs.h b/include/asm-cris/arch-v32/hwregs/extmem_defs.h deleted file mode 100644 index c47b5ca48ece..000000000000 --- a/include/asm-cris/arch-v32/hwregs/extmem_defs.h +++ /dev/null @@ -1,369 +0,0 @@ -#ifndef __extmem_defs_h -#define __extmem_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/ext_mem/mod/extmem_regs.r - * id: extmem_regs.r,v 1.1 2004/02/16 13:29:30 np Exp - * last modfied: Tue Mar 30 22:26:21 2004 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile extmem_defs.h ../../inst/ext_mem/mod/extmem_regs.r - * id: $Id: extmem_defs.h,v 1.5 2004/06/04 07:15:33 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope extmem */ - -/* Register rw_cse0_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_cse0_cfg; -#define REG_RD_ADDR_extmem_rw_cse0_cfg 0 -#define REG_WR_ADDR_extmem_rw_cse0_cfg 0 - -/* Register rw_cse1_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_cse1_cfg; -#define REG_RD_ADDR_extmem_rw_cse1_cfg 4 -#define REG_WR_ADDR_extmem_rw_cse1_cfg 4 - -/* Register rw_csr0_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_csr0_cfg; -#define REG_RD_ADDR_extmem_rw_csr0_cfg 8 -#define REG_WR_ADDR_extmem_rw_csr0_cfg 8 - -/* Register rw_csr1_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_csr1_cfg; -#define REG_RD_ADDR_extmem_rw_csr1_cfg 12 -#define REG_WR_ADDR_extmem_rw_csr1_cfg 12 - -/* Register rw_csp0_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_csp0_cfg; -#define REG_RD_ADDR_extmem_rw_csp0_cfg 16 -#define REG_WR_ADDR_extmem_rw_csp0_cfg 16 - -/* Register rw_csp1_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_csp1_cfg; -#define REG_RD_ADDR_extmem_rw_csp1_cfg 20 -#define REG_WR_ADDR_extmem_rw_csp1_cfg 20 - -/* Register rw_csp2_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_csp2_cfg; -#define REG_RD_ADDR_extmem_rw_csp2_cfg 24 -#define REG_WR_ADDR_extmem_rw_csp2_cfg 24 - -/* Register rw_csp3_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_csp3_cfg; -#define REG_RD_ADDR_extmem_rw_csp3_cfg 28 -#define REG_WR_ADDR_extmem_rw_csp3_cfg 28 - -/* Register rw_csp4_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_csp4_cfg; -#define REG_RD_ADDR_extmem_rw_csp4_cfg 32 -#define REG_WR_ADDR_extmem_rw_csp4_cfg 32 - -/* Register rw_csp5_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_csp5_cfg; -#define REG_RD_ADDR_extmem_rw_csp5_cfg 36 -#define REG_WR_ADDR_extmem_rw_csp5_cfg 36 - -/* Register rw_csp6_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_csp6_cfg; -#define REG_RD_ADDR_extmem_rw_csp6_cfg 40 -#define REG_WR_ADDR_extmem_rw_csp6_cfg 40 - -/* Register rw_css_cfg, scope extmem, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int mode : 1; - unsigned int erc_en : 1; - unsigned int dummy1 : 6; - unsigned int size : 3; - unsigned int log : 1; - unsigned int en : 1; -} reg_extmem_rw_css_cfg; -#define REG_RD_ADDR_extmem_rw_css_cfg 44 -#define REG_WR_ADDR_extmem_rw_css_cfg 44 - -/* Register rw_status_handle, scope extmem, type rw */ -typedef struct { - unsigned int h : 32; -} reg_extmem_rw_status_handle; -#define REG_RD_ADDR_extmem_rw_status_handle 48 -#define REG_WR_ADDR_extmem_rw_status_handle 48 - -/* Register rw_wait_pin, scope extmem, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 15; - unsigned int start : 1; -} reg_extmem_rw_wait_pin; -#define REG_RD_ADDR_extmem_rw_wait_pin 52 -#define REG_WR_ADDR_extmem_rw_wait_pin 52 - -/* Register rw_gated_csp, scope extmem, type rw */ -typedef struct { - unsigned int dummy1 : 31; - unsigned int en : 1; -} reg_extmem_rw_gated_csp; -#define REG_RD_ADDR_extmem_rw_gated_csp 56 -#define REG_WR_ADDR_extmem_rw_gated_csp 56 - - -/* Constants */ -enum { - regk_extmem_b16 = 0x00000001, - regk_extmem_b32 = 0x00000000, - regk_extmem_bwe = 0x00000000, - regk_extmem_cwe = 0x00000001, - regk_extmem_no = 0x00000000, - regk_extmem_rw_cse0_cfg_default = 0x000006cf, - regk_extmem_rw_cse1_cfg_default = 0x000006cf, - regk_extmem_rw_csp0_cfg_default = 0x000006cf, - regk_extmem_rw_csp1_cfg_default = 0x000006cf, - regk_extmem_rw_csp2_cfg_default = 0x000006cf, - regk_extmem_rw_csp3_cfg_default = 0x000006cf, - regk_extmem_rw_csp4_cfg_default = 0x000006cf, - regk_extmem_rw_csp5_cfg_default = 0x000006cf, - regk_extmem_rw_csp6_cfg_default = 0x000006cf, - regk_extmem_rw_csr0_cfg_default = 0x000006cf, - regk_extmem_rw_csr1_cfg_default = 0x000006cf, - regk_extmem_rw_css_cfg_default = 0x000006cf, - regk_extmem_s128KB = 0x00000000, - regk_extmem_s16MB = 0x00000005, - regk_extmem_s1MB = 0x00000001, - regk_extmem_s2MB = 0x00000002, - regk_extmem_s32MB = 0x00000006, - regk_extmem_s4MB = 0x00000003, - regk_extmem_s64MB = 0x00000007, - regk_extmem_s8MB = 0x00000004, - regk_extmem_yes = 0x00000001 -}; -#endif /* __extmem_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/gio_defs.h b/include/asm-cris/arch-v32/hwregs/gio_defs.h deleted file mode 100644 index 3e9a0b25366f..000000000000 --- a/include/asm-cris/arch-v32/hwregs/gio_defs.h +++ /dev/null @@ -1,295 +0,0 @@ -#ifndef __gio_defs_h -#define __gio_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/gio/rtl/gio_regs.r - * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp - * last modfied: Mon Apr 11 16:07:47 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile gio_defs.h ../../inst/gio/rtl/gio_regs.r - * id: $Id: gio_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope gio */ - -/* Register rw_pa_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_dout; -#define REG_RD_ADDR_gio_rw_pa_dout 0 -#define REG_WR_ADDR_gio_rw_pa_dout 0 - -/* Register r_pa_din, scope gio, type r */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_r_pa_din; -#define REG_RD_ADDR_gio_r_pa_din 4 - -/* Register rw_pa_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_oe; -#define REG_RD_ADDR_gio_rw_pa_oe 8 -#define REG_WR_ADDR_gio_rw_pa_oe 8 - -/* Register rw_intr_cfg, scope gio, type rw */ -typedef struct { - unsigned int pa0 : 3; - unsigned int pa1 : 3; - unsigned int pa2 : 3; - unsigned int pa3 : 3; - unsigned int pa4 : 3; - unsigned int pa5 : 3; - unsigned int pa6 : 3; - unsigned int pa7 : 3; - unsigned int dummy1 : 8; -} reg_gio_rw_intr_cfg; -#define REG_RD_ADDR_gio_rw_intr_cfg 12 -#define REG_WR_ADDR_gio_rw_intr_cfg 12 - -/* Register rw_intr_mask, scope gio, type rw */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int dummy1 : 24; -} reg_gio_rw_intr_mask; -#define REG_RD_ADDR_gio_rw_intr_mask 16 -#define REG_WR_ADDR_gio_rw_intr_mask 16 - -/* Register rw_ack_intr, scope gio, type rw */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int dummy1 : 24; -} reg_gio_rw_ack_intr; -#define REG_RD_ADDR_gio_rw_ack_intr 20 -#define REG_WR_ADDR_gio_rw_ack_intr 20 - -/* Register r_intr, scope gio, type r */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int dummy1 : 24; -} reg_gio_r_intr; -#define REG_RD_ADDR_gio_r_intr 24 - -/* Register r_masked_intr, scope gio, type r */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int dummy1 : 24; -} reg_gio_r_masked_intr; -#define REG_RD_ADDR_gio_r_masked_intr 28 - -/* Register rw_pb_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pb_dout; -#define REG_RD_ADDR_gio_rw_pb_dout 32 -#define REG_WR_ADDR_gio_rw_pb_dout 32 - -/* Register r_pb_din, scope gio, type r */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_r_pb_din; -#define REG_RD_ADDR_gio_r_pb_din 36 - -/* Register rw_pb_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pb_oe; -#define REG_RD_ADDR_gio_rw_pb_oe 40 -#define REG_WR_ADDR_gio_rw_pb_oe 40 - -/* Register rw_pc_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pc_dout; -#define REG_RD_ADDR_gio_rw_pc_dout 48 -#define REG_WR_ADDR_gio_rw_pc_dout 48 - -/* Register r_pc_din, scope gio, type r */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_r_pc_din; -#define REG_RD_ADDR_gio_r_pc_din 52 - -/* Register rw_pc_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pc_oe; -#define REG_RD_ADDR_gio_rw_pc_oe 56 -#define REG_WR_ADDR_gio_rw_pc_oe 56 - -/* Register rw_pd_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pd_dout; -#define REG_RD_ADDR_gio_rw_pd_dout 64 -#define REG_WR_ADDR_gio_rw_pd_dout 64 - -/* Register r_pd_din, scope gio, type r */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_r_pd_din; -#define REG_RD_ADDR_gio_r_pd_din 68 - -/* Register rw_pd_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pd_oe; -#define REG_RD_ADDR_gio_rw_pd_oe 72 -#define REG_WR_ADDR_gio_rw_pd_oe 72 - -/* Register rw_pe_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pe_dout; -#define REG_RD_ADDR_gio_rw_pe_dout 80 -#define REG_WR_ADDR_gio_rw_pe_dout 80 - -/* Register r_pe_din, scope gio, type r */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_r_pe_din; -#define REG_RD_ADDR_gio_r_pe_din 84 - -/* Register rw_pe_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pe_oe; -#define REG_RD_ADDR_gio_rw_pe_oe 88 -#define REG_WR_ADDR_gio_rw_pe_oe 88 - - -/* Constants */ -enum { - regk_gio_anyedge = 0x00000007, - regk_gio_hi = 0x00000001, - regk_gio_lo = 0x00000002, - regk_gio_negedge = 0x00000006, - regk_gio_no = 0x00000000, - regk_gio_off = 0x00000000, - regk_gio_posedge = 0x00000005, - regk_gio_rw_intr_cfg_default = 0x00000000, - regk_gio_rw_intr_mask_default = 0x00000000, - regk_gio_rw_pa_oe_default = 0x00000000, - regk_gio_rw_pb_oe_default = 0x00000000, - regk_gio_rw_pc_oe_default = 0x00000000, - regk_gio_rw_pd_oe_default = 0x00000000, - regk_gio_rw_pe_oe_default = 0x00000000, - regk_gio_set = 0x00000003, - regk_gio_yes = 0x00000001 -}; -#endif /* __gio_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/intr_vect.h b/include/asm-cris/arch-v32/hwregs/intr_vect.h deleted file mode 100644 index 5c1b28fb205d..000000000000 --- a/include/asm-cris/arch-v32/hwregs/intr_vect.h +++ /dev/null @@ -1,39 +0,0 @@ -/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version - from ../../inst/intr_vect/rtl/guinness/ivmask.config.r -version . */ - -#ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R -#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R -#define MEMARB_INTR_VECT 0x31 -#define GEN_IO_INTR_VECT 0x32 -#define IOP0_INTR_VECT 0x33 -#define IOP1_INTR_VECT 0x34 -#define IOP2_INTR_VECT 0x35 -#define IOP3_INTR_VECT 0x36 -#define DMA0_INTR_VECT 0x37 -#define DMA1_INTR_VECT 0x38 -#define DMA2_INTR_VECT 0x39 -#define DMA3_INTR_VECT 0x3a -#define DMA4_INTR_VECT 0x3b -#define DMA5_INTR_VECT 0x3c -#define DMA6_INTR_VECT 0x3d -#define DMA7_INTR_VECT 0x3e -#define DMA8_INTR_VECT 0x3f -#define DMA9_INTR_VECT 0x40 -#define ATA_INTR_VECT 0x41 -#define SSER0_INTR_VECT 0x42 -#define SSER1_INTR_VECT 0x43 -#define SER0_INTR_VECT 0x44 -#define SER1_INTR_VECT 0x45 -#define SER2_INTR_VECT 0x46 -#define SER3_INTR_VECT 0x47 -#define P21_INTR_VECT 0x48 -#define ETH0_INTR_VECT 0x49 -#define ETH1_INTR_VECT 0x4a -#define TIMER_INTR_VECT 0x4b -#define BIF_ARB_INTR_VECT 0x4c -#define BIF_DMA_INTR_VECT 0x4d -#define EXT_INTR_VECT 0x4e -#define IPI_INTR_VECT 0x4f - -#endif diff --git a/include/asm-cris/arch-v32/hwregs/iop/Makefile b/include/asm-cris/arch-v32/hwregs/iop/Makefile deleted file mode 100644 index a90056a095e3..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/Makefile +++ /dev/null @@ -1,146 +0,0 @@ -# $Id: Makefile,v 1.3 2004/01/07 20:34:55 johana Exp $ -# Makefile to generate or copy the latest register definitions -# and related datastructures and helpermacros. -# The offical place for these files is probably at: -RELEASE ?= r1_alfa5 -IOPOFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/ - -IOPROCDIR = /n/asic/design/io/io_proc/rtl - -IOPROCINCL_FILES = -IOPROCINCL_FILES2= -IOPROCINCL_FILES += iop_crc_par_defs.h -IOPROCINCL_FILES += iop_dmc_in_defs.h -IOPROCINCL_FILES += iop_dmc_out_defs.h -IOPROCINCL_FILES += iop_fifo_in_defs.h -IOPROCINCL_FILES += iop_fifo_in_xtra_defs.h -IOPROCINCL_FILES += iop_fifo_out_defs.h -IOPROCINCL_FILES += iop_fifo_out_xtra_defs.h -IOPROCINCL_FILES += iop_mpu_defs.h -IOPROCINCL_FILES2+= iop_mpu_macros.h -IOPROCINCL_FILES2+= iop_reg_space.h -IOPROCINCL_FILES += iop_sap_in_defs.h -IOPROCINCL_FILES += iop_sap_out_defs.h -IOPROCINCL_FILES += iop_scrc_in_defs.h -IOPROCINCL_FILES += iop_scrc_out_defs.h -IOPROCINCL_FILES += iop_spu_defs.h -# in guiness/ -IOPROCINCL_FILES += iop_sw_cfg_defs.h -IOPROCINCL_FILES += iop_sw_cpu_defs.h -IOPROCINCL_FILES += iop_sw_mpu_defs.h -IOPROCINCL_FILES += iop_sw_spu_defs.h -# -IOPROCINCL_FILES += iop_timer_grp_defs.h -IOPROCINCL_FILES += iop_trigger_grp_defs.h -# in guiness/ -IOPROCINCL_FILES += iop_version_defs.h - -IOPROCASMINCL_FILES = $(patsubst %_defs.h,%_defs_asm.h,$(IOPROCINCL_FILES)) -IOPROCASMINCL_FILES+= iop_reg_space_asm.h - - -IOPROCREGDESC = -IOPROCREGDESC += $(IOPROCDIR)/iop_crc_par.r -#IOPROCREGDESC += $(IOPROCDIR)/iop_crc_ser.r -IOPROCREGDESC += $(IOPROCDIR)/iop_dmc_in.r -IOPROCREGDESC += $(IOPROCDIR)/iop_dmc_out.r -IOPROCREGDESC += $(IOPROCDIR)/iop_fifo_in.r -IOPROCREGDESC += $(IOPROCDIR)/iop_fifo_in_xtra.r -IOPROCREGDESC += $(IOPROCDIR)/iop_fifo_out.r -IOPROCREGDESC += $(IOPROCDIR)/iop_fifo_out_xtra.r -IOPROCREGDESC += $(IOPROCDIR)/iop_mpu.r -IOPROCREGDESC += $(IOPROCDIR)/iop_sap_in.r -IOPROCREGDESC += $(IOPROCDIR)/iop_sap_out.r -IOPROCREGDESC += $(IOPROCDIR)/iop_scrc_in.r -IOPROCREGDESC += $(IOPROCDIR)/iop_scrc_out.r -IOPROCREGDESC += $(IOPROCDIR)/iop_spu.r -IOPROCREGDESC += $(IOPROCDIR)/guinness/iop_sw_cfg.r -IOPROCREGDESC += $(IOPROCDIR)/guinness/iop_sw_cpu.r -IOPROCREGDESC += $(IOPROCDIR)/guinness/iop_sw_mpu.r -IOPROCREGDESC += $(IOPROCDIR)/guinness/iop_sw_spu.r -IOPROCREGDESC += $(IOPROCDIR)/iop_timer_grp.r -IOPROCREGDESC += $(IOPROCDIR)/iop_trigger_grp.r -IOPROCREGDESC += $(IOPROCDIR)/guinness/iop_version.r - - -RDES2C = /n/asic/bin/rdes2c -RDES2C = /n/asic/design/tools/rdesc/rdes2c -RDES2INTR = /n/asic/design/tools/rdesc/rdes2intr -RDES2TXT = /n/asic/design/tools/rdesc/rdes2txt - -## all - Just print help - you probably want to do 'make gen' -all: help - -## help - This help -help: - @grep '^## ' Makefile - -## gen - Generate include files -gen: $(IOPROCINCL_FILES) $(IOPROCINCL_FILES2) $(IOPROCASMINCL_FILES) - echo "INCL: $(IOPROCINCL_FILES)" - echo "INCL2: $(IOPROCINCL_FILES2)" - echo "ASMINCL: $(IOPROCASMINCL_FILES)" - -# From the official location... -iop_reg_space.h: $(IOPOFFICIAL_INCDIR)/iop_reg_space.h - cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ -iop_mpu_macros.h: $(IOPOFFICIAL_INCDIR)/iop_mpu_macros.h - cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ - -## copy - Copy files from official location -copy: - @echo "## Copying and fixing iop files ##" - @for HFILE in $(IOPROCINCL_FILES); do \ - echo " $$HFILE"; \ - cat $(IOPOFFICIAL_INCDIR)$$HFILE | sed -e 's/\$$Id\:/id\:/g' > $$HFILE; \ - done - @for HFILE in $(IOPROCINCL_FILES2); do \ - echo " $$HFILE"; \ - cat $(IOPOFFICIAL_INCDIR)$$HFILE | sed -e 's/\$$Id\:/id\:/g' > $$HFILE; \ - done - @echo "## Copying and fixing iop asm files ##" - @for HFILE in $(IOPROCASMINCL_FILES); do \ - echo " $$HFILE"; \ - cat $(IOPOFFICIAL_INCDIR)asm/$$HFILE | sed -e 's/\$$Id\:/id\:/g' > asm/$$HFILE; \ - done - -# I/O processor files: -## iop - Generate I/O processor include files -iop: $(IOPROCINCL_FILES) $(IOPROCINCL_FILES2) $(IOPROCASMINCL_FILES) -iop_sw_%_defs.h: $(IOPROCDIR)/guinness/iop_sw_%.r - $(RDES2C) $< -iop_version_defs.h: $(IOPROCDIR)/guinness/iop_version.r - $(RDES2C) $< -%_defs.h: $(IOPROCDIR)/%.r - $(RDES2C) $< -%_defs_asm.h: $(IOPROCDIR)/%.r - $(RDES2C) -asm $< -iop_version_defs_asm.h: $(IOPROCDIR)/guinness/iop_version.r - $(RDES2C) -asm $< - -## doc - Generate .axw files from register description. -doc: $(IOPROCREGDESC) - for RDES in $^; do \ - $(RDES2TXT) $$RDES; \ - done - -.PHONY: axw -## %.axw - Generate the specified .axw file (doesn't work for all files -## due to inconsistent naming of .r files. -%.axw: axw - @for RDES in $(IOPROCREGDESC); do \ - if echo "$$RDES" | grep $* ; then \ - $(RDES2TXT) $$RDES; \ - fi \ - done - -.PHONY: clean -## clean - Remove .h files and .axw files. -clean: - rm -rf $(IOPROCINCL_FILES) *.axw - -.PHONY: cleandoc -## cleandoc - Remove .axw files. -cleandoc: - rm -rf *.axw - diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h deleted file mode 100644 index a4b58000c164..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h +++ /dev/null @@ -1,171 +0,0 @@ -#ifndef __iop_crc_par_defs_asm_h -#define __iop_crc_par_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_crc_par.r - * id: - * last modfied: Mon Apr 11 16:08:45 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_crc_par_defs_asm.h ../../inst/io_proc/rtl/iop_crc_par.r - * id: $Id: iop_crc_par_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_cfg___mode___lsb 0 -#define reg_iop_crc_par_rw_cfg___mode___width 1 -#define reg_iop_crc_par_rw_cfg___mode___bit 0 -#define reg_iop_crc_par_rw_cfg___crc_out___lsb 1 -#define reg_iop_crc_par_rw_cfg___crc_out___width 1 -#define reg_iop_crc_par_rw_cfg___crc_out___bit 1 -#define reg_iop_crc_par_rw_cfg___rev_out___lsb 2 -#define reg_iop_crc_par_rw_cfg___rev_out___width 1 -#define reg_iop_crc_par_rw_cfg___rev_out___bit 2 -#define reg_iop_crc_par_rw_cfg___inv_out___lsb 3 -#define reg_iop_crc_par_rw_cfg___inv_out___width 1 -#define reg_iop_crc_par_rw_cfg___inv_out___bit 3 -#define reg_iop_crc_par_rw_cfg___trig___lsb 4 -#define reg_iop_crc_par_rw_cfg___trig___width 2 -#define reg_iop_crc_par_rw_cfg___poly___lsb 6 -#define reg_iop_crc_par_rw_cfg___poly___width 3 -#define reg_iop_crc_par_rw_cfg_offset 0 - -/* Register rw_init_crc, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_init_crc_offset 4 - -/* Register rw_correct_crc, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_correct_crc_offset 8 - -/* Register rw_ctrl, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_ctrl___en___lsb 0 -#define reg_iop_crc_par_rw_ctrl___en___width 1 -#define reg_iop_crc_par_rw_ctrl___en___bit 0 -#define reg_iop_crc_par_rw_ctrl_offset 12 - -/* Register rw_set_last, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_set_last___tr_dif___lsb 0 -#define reg_iop_crc_par_rw_set_last___tr_dif___width 1 -#define reg_iop_crc_par_rw_set_last___tr_dif___bit 0 -#define reg_iop_crc_par_rw_set_last_offset 16 - -/* Register rw_wr1byte, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_wr1byte___data___lsb 0 -#define reg_iop_crc_par_rw_wr1byte___data___width 8 -#define reg_iop_crc_par_rw_wr1byte_offset 20 - -/* Register rw_wr2byte, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_wr2byte___data___lsb 0 -#define reg_iop_crc_par_rw_wr2byte___data___width 16 -#define reg_iop_crc_par_rw_wr2byte_offset 24 - -/* Register rw_wr3byte, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_wr3byte___data___lsb 0 -#define reg_iop_crc_par_rw_wr3byte___data___width 24 -#define reg_iop_crc_par_rw_wr3byte_offset 28 - -/* Register rw_wr4byte, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_wr4byte___data___lsb 0 -#define reg_iop_crc_par_rw_wr4byte___data___width 32 -#define reg_iop_crc_par_rw_wr4byte_offset 32 - -/* Register rw_wr1byte_last, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_wr1byte_last___data___lsb 0 -#define reg_iop_crc_par_rw_wr1byte_last___data___width 8 -#define reg_iop_crc_par_rw_wr1byte_last_offset 36 - -/* Register rw_wr2byte_last, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_wr2byte_last___data___lsb 0 -#define reg_iop_crc_par_rw_wr2byte_last___data___width 16 -#define reg_iop_crc_par_rw_wr2byte_last_offset 40 - -/* Register rw_wr3byte_last, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_wr3byte_last___data___lsb 0 -#define reg_iop_crc_par_rw_wr3byte_last___data___width 24 -#define reg_iop_crc_par_rw_wr3byte_last_offset 44 - -/* Register rw_wr4byte_last, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_wr4byte_last___data___lsb 0 -#define reg_iop_crc_par_rw_wr4byte_last___data___width 32 -#define reg_iop_crc_par_rw_wr4byte_last_offset 48 - -/* Register r_stat, scope iop_crc_par, type r */ -#define reg_iop_crc_par_r_stat___err___lsb 0 -#define reg_iop_crc_par_r_stat___err___width 1 -#define reg_iop_crc_par_r_stat___err___bit 0 -#define reg_iop_crc_par_r_stat___busy___lsb 1 -#define reg_iop_crc_par_r_stat___busy___width 1 -#define reg_iop_crc_par_r_stat___busy___bit 1 -#define reg_iop_crc_par_r_stat_offset 52 - -/* Register r_sh_reg, scope iop_crc_par, type r */ -#define reg_iop_crc_par_r_sh_reg_offset 56 - -/* Register r_crc, scope iop_crc_par, type r */ -#define reg_iop_crc_par_r_crc_offset 60 - -/* Register rw_strb_rec_dif_in, scope iop_crc_par, type rw */ -#define reg_iop_crc_par_rw_strb_rec_dif_in___last___lsb 0 -#define reg_iop_crc_par_rw_strb_rec_dif_in___last___width 2 -#define reg_iop_crc_par_rw_strb_rec_dif_in_offset 64 - - -/* Constants */ -#define regk_iop_crc_par_calc 0x00000001 -#define regk_iop_crc_par_ccitt 0x00000002 -#define regk_iop_crc_par_check 0x00000000 -#define regk_iop_crc_par_crc16 0x00000001 -#define regk_iop_crc_par_crc32 0x00000000 -#define regk_iop_crc_par_crc5 0x00000003 -#define regk_iop_crc_par_crc5_11 0x00000004 -#define regk_iop_crc_par_dif_in 0x00000002 -#define regk_iop_crc_par_hi 0x00000000 -#define regk_iop_crc_par_neg 0x00000002 -#define regk_iop_crc_par_no 0x00000000 -#define regk_iop_crc_par_pos 0x00000001 -#define regk_iop_crc_par_pos_neg 0x00000003 -#define regk_iop_crc_par_rw_cfg_default 0x00000000 -#define regk_iop_crc_par_rw_ctrl_default 0x00000000 -#define regk_iop_crc_par_yes 0x00000001 -#endif /* __iop_crc_par_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h deleted file mode 100644 index e7d539feccb1..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h +++ /dev/null @@ -1,321 +0,0 @@ -#ifndef __iop_dmc_in_defs_asm_h -#define __iop_dmc_in_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_dmc_in.r - * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_dmc_in_defs_asm.h ../../inst/io_proc/rtl/iop_dmc_in.r - * id: $Id: iop_dmc_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_cfg___sth_intr___lsb 0 -#define reg_iop_dmc_in_rw_cfg___sth_intr___width 3 -#define reg_iop_dmc_in_rw_cfg___last_dis_dif___lsb 3 -#define reg_iop_dmc_in_rw_cfg___last_dis_dif___width 1 -#define reg_iop_dmc_in_rw_cfg___last_dis_dif___bit 3 -#define reg_iop_dmc_in_rw_cfg_offset 0 - -/* Register rw_ctrl, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_ctrl___dif_en___lsb 0 -#define reg_iop_dmc_in_rw_ctrl___dif_en___width 1 -#define reg_iop_dmc_in_rw_ctrl___dif_en___bit 0 -#define reg_iop_dmc_in_rw_ctrl___dif_dis___lsb 1 -#define reg_iop_dmc_in_rw_ctrl___dif_dis___width 1 -#define reg_iop_dmc_in_rw_ctrl___dif_dis___bit 1 -#define reg_iop_dmc_in_rw_ctrl___stream_clr___lsb 2 -#define reg_iop_dmc_in_rw_ctrl___stream_clr___width 1 -#define reg_iop_dmc_in_rw_ctrl___stream_clr___bit 2 -#define reg_iop_dmc_in_rw_ctrl_offset 4 - -/* Register r_stat, scope iop_dmc_in, type r */ -#define reg_iop_dmc_in_r_stat___dif_en___lsb 0 -#define reg_iop_dmc_in_r_stat___dif_en___width 1 -#define reg_iop_dmc_in_r_stat___dif_en___bit 0 -#define reg_iop_dmc_in_r_stat_offset 8 - -/* Register rw_stream_cmd, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_stream_cmd___cmd___lsb 0 -#define reg_iop_dmc_in_rw_stream_cmd___cmd___width 10 -#define reg_iop_dmc_in_rw_stream_cmd___n___lsb 16 -#define reg_iop_dmc_in_rw_stream_cmd___n___width 8 -#define reg_iop_dmc_in_rw_stream_cmd_offset 12 - -/* Register rw_stream_wr_data, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_stream_wr_data_offset 16 - -/* Register rw_stream_wr_data_last, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_stream_wr_data_last_offset 20 - -/* Register rw_stream_ctrl, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_stream_ctrl___eop___lsb 0 -#define reg_iop_dmc_in_rw_stream_ctrl___eop___width 1 -#define reg_iop_dmc_in_rw_stream_ctrl___eop___bit 0 -#define reg_iop_dmc_in_rw_stream_ctrl___wait___lsb 1 -#define reg_iop_dmc_in_rw_stream_ctrl___wait___width 1 -#define reg_iop_dmc_in_rw_stream_ctrl___wait___bit 1 -#define reg_iop_dmc_in_rw_stream_ctrl___keep_md___lsb 2 -#define reg_iop_dmc_in_rw_stream_ctrl___keep_md___width 1 -#define reg_iop_dmc_in_rw_stream_ctrl___keep_md___bit 2 -#define reg_iop_dmc_in_rw_stream_ctrl___size___lsb 3 -#define reg_iop_dmc_in_rw_stream_ctrl___size___width 3 -#define reg_iop_dmc_in_rw_stream_ctrl_offset 24 - -/* Register r_stream_stat, scope iop_dmc_in, type r */ -#define reg_iop_dmc_in_r_stream_stat___sth___lsb 0 -#define reg_iop_dmc_in_r_stream_stat___sth___width 7 -#define reg_iop_dmc_in_r_stream_stat___full___lsb 16 -#define reg_iop_dmc_in_r_stream_stat___full___width 1 -#define reg_iop_dmc_in_r_stream_stat___full___bit 16 -#define reg_iop_dmc_in_r_stream_stat___last_pkt___lsb 17 -#define reg_iop_dmc_in_r_stream_stat___last_pkt___width 1 -#define reg_iop_dmc_in_r_stream_stat___last_pkt___bit 17 -#define reg_iop_dmc_in_r_stream_stat___data_md_valid___lsb 18 -#define reg_iop_dmc_in_r_stream_stat___data_md_valid___width 1 -#define reg_iop_dmc_in_r_stream_stat___data_md_valid___bit 18 -#define reg_iop_dmc_in_r_stream_stat___ctxt_md_valid___lsb 19 -#define reg_iop_dmc_in_r_stream_stat___ctxt_md_valid___width 1 -#define reg_iop_dmc_in_r_stream_stat___ctxt_md_valid___bit 19 -#define reg_iop_dmc_in_r_stream_stat___group_md_valid___lsb 20 -#define reg_iop_dmc_in_r_stream_stat___group_md_valid___width 1 -#define reg_iop_dmc_in_r_stream_stat___group_md_valid___bit 20 -#define reg_iop_dmc_in_r_stream_stat___stream_busy___lsb 21 -#define reg_iop_dmc_in_r_stream_stat___stream_busy___width 1 -#define reg_iop_dmc_in_r_stream_stat___stream_busy___bit 21 -#define reg_iop_dmc_in_r_stream_stat___cmd_rdy___lsb 22 -#define reg_iop_dmc_in_r_stream_stat___cmd_rdy___width 1 -#define reg_iop_dmc_in_r_stream_stat___cmd_rdy___bit 22 -#define reg_iop_dmc_in_r_stream_stat_offset 28 - -/* Register r_data_descr, scope iop_dmc_in, type r */ -#define reg_iop_dmc_in_r_data_descr___ctrl___lsb 0 -#define reg_iop_dmc_in_r_data_descr___ctrl___width 8 -#define reg_iop_dmc_in_r_data_descr___stat___lsb 8 -#define reg_iop_dmc_in_r_data_descr___stat___width 8 -#define reg_iop_dmc_in_r_data_descr___md___lsb 16 -#define reg_iop_dmc_in_r_data_descr___md___width 16 -#define reg_iop_dmc_in_r_data_descr_offset 32 - -/* Register r_ctxt_descr, scope iop_dmc_in, type r */ -#define reg_iop_dmc_in_r_ctxt_descr___ctrl___lsb 0 -#define reg_iop_dmc_in_r_ctxt_descr___ctrl___width 8 -#define reg_iop_dmc_in_r_ctxt_descr___stat___lsb 8 -#define reg_iop_dmc_in_r_ctxt_descr___stat___width 8 -#define reg_iop_dmc_in_r_ctxt_descr___md0___lsb 16 -#define reg_iop_dmc_in_r_ctxt_descr___md0___width 16 -#define reg_iop_dmc_in_r_ctxt_descr_offset 36 - -/* Register r_ctxt_descr_md1, scope iop_dmc_in, type r */ -#define reg_iop_dmc_in_r_ctxt_descr_md1_offset 40 - -/* Register r_ctxt_descr_md2, scope iop_dmc_in, type r */ -#define reg_iop_dmc_in_r_ctxt_descr_md2_offset 44 - -/* Register r_group_descr, scope iop_dmc_in, type r */ -#define reg_iop_dmc_in_r_group_descr___ctrl___lsb 0 -#define reg_iop_dmc_in_r_group_descr___ctrl___width 8 -#define reg_iop_dmc_in_r_group_descr___stat___lsb 8 -#define reg_iop_dmc_in_r_group_descr___stat___width 8 -#define reg_iop_dmc_in_r_group_descr___md___lsb 16 -#define reg_iop_dmc_in_r_group_descr___md___width 16 -#define reg_iop_dmc_in_r_group_descr_offset 56 - -/* Register rw_data_descr, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_data_descr___md___lsb 16 -#define reg_iop_dmc_in_rw_data_descr___md___width 16 -#define reg_iop_dmc_in_rw_data_descr_offset 60 - -/* Register rw_ctxt_descr, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_ctxt_descr___md0___lsb 16 -#define reg_iop_dmc_in_rw_ctxt_descr___md0___width 16 -#define reg_iop_dmc_in_rw_ctxt_descr_offset 64 - -/* Register rw_ctxt_descr_md1, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_ctxt_descr_md1_offset 68 - -/* Register rw_ctxt_descr_md2, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_ctxt_descr_md2_offset 72 - -/* Register rw_group_descr, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_group_descr___md___lsb 16 -#define reg_iop_dmc_in_rw_group_descr___md___width 16 -#define reg_iop_dmc_in_rw_group_descr_offset 84 - -/* Register rw_intr_mask, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_intr_mask___data_md___lsb 0 -#define reg_iop_dmc_in_rw_intr_mask___data_md___width 1 -#define reg_iop_dmc_in_rw_intr_mask___data_md___bit 0 -#define reg_iop_dmc_in_rw_intr_mask___ctxt_md___lsb 1 -#define reg_iop_dmc_in_rw_intr_mask___ctxt_md___width 1 -#define reg_iop_dmc_in_rw_intr_mask___ctxt_md___bit 1 -#define reg_iop_dmc_in_rw_intr_mask___group_md___lsb 2 -#define reg_iop_dmc_in_rw_intr_mask___group_md___width 1 -#define reg_iop_dmc_in_rw_intr_mask___group_md___bit 2 -#define reg_iop_dmc_in_rw_intr_mask___cmd_rdy___lsb 3 -#define reg_iop_dmc_in_rw_intr_mask___cmd_rdy___width 1 -#define reg_iop_dmc_in_rw_intr_mask___cmd_rdy___bit 3 -#define reg_iop_dmc_in_rw_intr_mask___sth___lsb 4 -#define reg_iop_dmc_in_rw_intr_mask___sth___width 1 -#define reg_iop_dmc_in_rw_intr_mask___sth___bit 4 -#define reg_iop_dmc_in_rw_intr_mask___full___lsb 5 -#define reg_iop_dmc_in_rw_intr_mask___full___width 1 -#define reg_iop_dmc_in_rw_intr_mask___full___bit 5 -#define reg_iop_dmc_in_rw_intr_mask_offset 88 - -/* Register rw_ack_intr, scope iop_dmc_in, type rw */ -#define reg_iop_dmc_in_rw_ack_intr___data_md___lsb 0 -#define reg_iop_dmc_in_rw_ack_intr___data_md___width 1 -#define reg_iop_dmc_in_rw_ack_intr___data_md___bit 0 -#define reg_iop_dmc_in_rw_ack_intr___ctxt_md___lsb 1 -#define reg_iop_dmc_in_rw_ack_intr___ctxt_md___width 1 -#define reg_iop_dmc_in_rw_ack_intr___ctxt_md___bit 1 -#define reg_iop_dmc_in_rw_ack_intr___group_md___lsb 2 -#define reg_iop_dmc_in_rw_ack_intr___group_md___width 1 -#define reg_iop_dmc_in_rw_ack_intr___group_md___bit 2 -#define reg_iop_dmc_in_rw_ack_intr___cmd_rdy___lsb 3 -#define reg_iop_dmc_in_rw_ack_intr___cmd_rdy___width 1 -#define reg_iop_dmc_in_rw_ack_intr___cmd_rdy___bit 3 -#define reg_iop_dmc_in_rw_ack_intr___sth___lsb 4 -#define reg_iop_dmc_in_rw_ack_intr___sth___width 1 -#define reg_iop_dmc_in_rw_ack_intr___sth___bit 4 -#define reg_iop_dmc_in_rw_ack_intr___full___lsb 5 -#define reg_iop_dmc_in_rw_ack_intr___full___width 1 -#define reg_iop_dmc_in_rw_ack_intr___full___bit 5 -#define reg_iop_dmc_in_rw_ack_intr_offset 92 - -/* Register r_intr, scope iop_dmc_in, type r */ -#define reg_iop_dmc_in_r_intr___data_md___lsb 0 -#define reg_iop_dmc_in_r_intr___data_md___width 1 -#define reg_iop_dmc_in_r_intr___data_md___bit 0 -#define reg_iop_dmc_in_r_intr___ctxt_md___lsb 1 -#define reg_iop_dmc_in_r_intr___ctxt_md___width 1 -#define reg_iop_dmc_in_r_intr___ctxt_md___bit 1 -#define reg_iop_dmc_in_r_intr___group_md___lsb 2 -#define reg_iop_dmc_in_r_intr___group_md___width 1 -#define reg_iop_dmc_in_r_intr___group_md___bit 2 -#define reg_iop_dmc_in_r_intr___cmd_rdy___lsb 3 -#define reg_iop_dmc_in_r_intr___cmd_rdy___width 1 -#define reg_iop_dmc_in_r_intr___cmd_rdy___bit 3 -#define reg_iop_dmc_in_r_intr___sth___lsb 4 -#define reg_iop_dmc_in_r_intr___sth___width 1 -#define reg_iop_dmc_in_r_intr___sth___bit 4 -#define reg_iop_dmc_in_r_intr___full___lsb 5 -#define reg_iop_dmc_in_r_intr___full___width 1 -#define reg_iop_dmc_in_r_intr___full___bit 5 -#define reg_iop_dmc_in_r_intr_offset 96 - -/* Register r_masked_intr, scope iop_dmc_in, type r */ -#define reg_iop_dmc_in_r_masked_intr___data_md___lsb 0 -#define reg_iop_dmc_in_r_masked_intr___data_md___width 1 -#define reg_iop_dmc_in_r_masked_intr___data_md___bit 0 -#define reg_iop_dmc_in_r_masked_intr___ctxt_md___lsb 1 -#define reg_iop_dmc_in_r_masked_intr___ctxt_md___width 1 -#define reg_iop_dmc_in_r_masked_intr___ctxt_md___bit 1 -#define reg_iop_dmc_in_r_masked_intr___group_md___lsb 2 -#define reg_iop_dmc_in_r_masked_intr___group_md___width 1 -#define reg_iop_dmc_in_r_masked_intr___group_md___bit 2 -#define reg_iop_dmc_in_r_masked_intr___cmd_rdy___lsb 3 -#define reg_iop_dmc_in_r_masked_intr___cmd_rdy___width 1 -#define reg_iop_dmc_in_r_masked_intr___cmd_rdy___bit 3 -#define reg_iop_dmc_in_r_masked_intr___sth___lsb 4 -#define reg_iop_dmc_in_r_masked_intr___sth___width 1 -#define reg_iop_dmc_in_r_masked_intr___sth___bit 4 -#define reg_iop_dmc_in_r_masked_intr___full___lsb 5 -#define reg_iop_dmc_in_r_masked_intr___full___width 1 -#define reg_iop_dmc_in_r_masked_intr___full___bit 5 -#define reg_iop_dmc_in_r_masked_intr_offset 100 - - -/* Constants */ -#define regk_iop_dmc_in_ack_pkt 0x00000100 -#define regk_iop_dmc_in_array 0x00000008 -#define regk_iop_dmc_in_burst 0x00000020 -#define regk_iop_dmc_in_copy_next 0x00000010 -#define regk_iop_dmc_in_copy_up 0x00000020 -#define regk_iop_dmc_in_dis_c 0x00000010 -#define regk_iop_dmc_in_dis_g 0x00000020 -#define regk_iop_dmc_in_lim1 0x00000000 -#define regk_iop_dmc_in_lim16 0x00000004 -#define regk_iop_dmc_in_lim2 0x00000001 -#define regk_iop_dmc_in_lim32 0x00000005 -#define regk_iop_dmc_in_lim4 0x00000002 -#define regk_iop_dmc_in_lim64 0x00000006 -#define regk_iop_dmc_in_lim8 0x00000003 -#define regk_iop_dmc_in_load_c 0x00000200 -#define regk_iop_dmc_in_load_c_n 0x00000280 -#define regk_iop_dmc_in_load_c_next 0x00000240 -#define regk_iop_dmc_in_load_d 0x00000140 -#define regk_iop_dmc_in_load_g 0x00000300 -#define regk_iop_dmc_in_load_g_down 0x000003c0 -#define regk_iop_dmc_in_load_g_next 0x00000340 -#define regk_iop_dmc_in_load_g_up 0x00000380 -#define regk_iop_dmc_in_next_en 0x00000010 -#define regk_iop_dmc_in_next_pkt 0x00000010 -#define regk_iop_dmc_in_no 0x00000000 -#define regk_iop_dmc_in_restore 0x00000020 -#define regk_iop_dmc_in_rw_cfg_default 0x00000000 -#define regk_iop_dmc_in_rw_ctxt_descr_default 0x00000000 -#define regk_iop_dmc_in_rw_ctxt_descr_md1_default 0x00000000 -#define regk_iop_dmc_in_rw_ctxt_descr_md2_default 0x00000000 -#define regk_iop_dmc_in_rw_data_descr_default 0x00000000 -#define regk_iop_dmc_in_rw_group_descr_default 0x00000000 -#define regk_iop_dmc_in_rw_intr_mask_default 0x00000000 -#define regk_iop_dmc_in_rw_stream_ctrl_default 0x00000000 -#define regk_iop_dmc_in_save_down 0x00000020 -#define regk_iop_dmc_in_save_up 0x00000020 -#define regk_iop_dmc_in_set_reg 0x00000050 -#define regk_iop_dmc_in_set_w_size1 0x00000190 -#define regk_iop_dmc_in_set_w_size2 0x000001a0 -#define regk_iop_dmc_in_set_w_size4 0x000001c0 -#define regk_iop_dmc_in_store_c 0x00000002 -#define regk_iop_dmc_in_store_descr 0x00000000 -#define regk_iop_dmc_in_store_g 0x00000004 -#define regk_iop_dmc_in_store_md 0x00000001 -#define regk_iop_dmc_in_update_down 0x00000020 -#define regk_iop_dmc_in_yes 0x00000001 -#endif /* __iop_dmc_in_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h deleted file mode 100644 index 9fe1a8054371..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h +++ /dev/null @@ -1,349 +0,0 @@ -#ifndef __iop_dmc_out_defs_asm_h -#define __iop_dmc_out_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_dmc_out.r - * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_dmc_out_defs_asm.h ../../inst/io_proc/rtl/iop_dmc_out.r - * id: $Id: iop_dmc_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope iop_dmc_out, type rw */ -#define reg_iop_dmc_out_rw_cfg___trf_lim___lsb 0 -#define reg_iop_dmc_out_rw_cfg___trf_lim___width 16 -#define reg_iop_dmc_out_rw_cfg___last_at_trf_lim___lsb 16 -#define reg_iop_dmc_out_rw_cfg___last_at_trf_lim___width 1 -#define reg_iop_dmc_out_rw_cfg___last_at_trf_lim___bit 16 -#define reg_iop_dmc_out_rw_cfg___dth_intr___lsb 17 -#define reg_iop_dmc_out_rw_cfg___dth_intr___width 3 -#define reg_iop_dmc_out_rw_cfg_offset 0 - -/* Register rw_ctrl, scope iop_dmc_out, type rw */ -#define reg_iop_dmc_out_rw_ctrl___dif_en___lsb 0 -#define reg_iop_dmc_out_rw_ctrl___dif_en___width 1 -#define reg_iop_dmc_out_rw_ctrl___dif_en___bit 0 -#define reg_iop_dmc_out_rw_ctrl___dif_dis___lsb 1 -#define reg_iop_dmc_out_rw_ctrl___dif_dis___width 1 -#define reg_iop_dmc_out_rw_ctrl___dif_dis___bit 1 -#define reg_iop_dmc_out_rw_ctrl_offset 4 - -/* Register r_stat, scope iop_dmc_out, type r */ -#define reg_iop_dmc_out_r_stat___dif_en___lsb 0 -#define reg_iop_dmc_out_r_stat___dif_en___width 1 -#define reg_iop_dmc_out_r_stat___dif_en___bit 0 -#define reg_iop_dmc_out_r_stat_offset 8 - -/* Register rw_stream_cmd, scope iop_dmc_out, type rw */ -#define reg_iop_dmc_out_rw_stream_cmd___cmd___lsb 0 -#define reg_iop_dmc_out_rw_stream_cmd___cmd___width 10 -#define reg_iop_dmc_out_rw_stream_cmd___n___lsb 16 -#define reg_iop_dmc_out_rw_stream_cmd___n___width 8 -#define reg_iop_dmc_out_rw_stream_cmd_offset 12 - -/* Register rs_stream_data, scope iop_dmc_out, type rs */ -#define reg_iop_dmc_out_rs_stream_data_offset 16 - -/* Register r_stream_data, scope iop_dmc_out, type r */ -#define reg_iop_dmc_out_r_stream_data_offset 20 - -/* Register r_stream_stat, scope iop_dmc_out, type r */ -#define reg_iop_dmc_out_r_stream_stat___dth___lsb 0 -#define reg_iop_dmc_out_r_stream_stat___dth___width 7 -#define reg_iop_dmc_out_r_stream_stat___dv___lsb 16 -#define reg_iop_dmc_out_r_stream_stat___dv___width 1 -#define reg_iop_dmc_out_r_stream_stat___dv___bit 16 -#define reg_iop_dmc_out_r_stream_stat___all_avail___lsb 17 -#define reg_iop_dmc_out_r_stream_stat___all_avail___width 1 -#define reg_iop_dmc_out_r_stream_stat___all_avail___bit 17 -#define reg_iop_dmc_out_r_stream_stat___last___lsb 18 -#define reg_iop_dmc_out_r_stream_stat___last___width 1 -#define reg_iop_dmc_out_r_stream_stat___last___bit 18 -#define reg_iop_dmc_out_r_stream_stat___size___lsb 19 -#define reg_iop_dmc_out_r_stream_stat___size___width 3 -#define reg_iop_dmc_out_r_stream_stat___data_md_valid___lsb 22 -#define reg_iop_dmc_out_r_stream_stat___data_md_valid___width 1 -#define reg_iop_dmc_out_r_stream_stat___data_md_valid___bit 22 -#define reg_iop_dmc_out_r_stream_stat___ctxt_md_valid___lsb 23 -#define reg_iop_dmc_out_r_stream_stat___ctxt_md_valid___width 1 -#define reg_iop_dmc_out_r_stream_stat___ctxt_md_valid___bit 23 -#define reg_iop_dmc_out_r_stream_stat___group_md_valid___lsb 24 -#define reg_iop_dmc_out_r_stream_stat___group_md_valid___width 1 -#define reg_iop_dmc_out_r_stream_stat___group_md_valid___bit 24 -#define reg_iop_dmc_out_r_stream_stat___stream_busy___lsb 25 -#define reg_iop_dmc_out_r_stream_stat___stream_busy___width 1 -#define reg_iop_dmc_out_r_stream_stat___stream_busy___bit 25 -#define reg_iop_dmc_out_r_stream_stat___cmd_rdy___lsb 26 -#define reg_iop_dmc_out_r_stream_stat___cmd_rdy___width 1 -#define reg_iop_dmc_out_r_stream_stat___cmd_rdy___bit 26 -#define reg_iop_dmc_out_r_stream_stat___cmd_rq___lsb 27 -#define reg_iop_dmc_out_r_stream_stat___cmd_rq___width 1 -#define reg_iop_dmc_out_r_stream_stat___cmd_rq___bit 27 -#define reg_iop_dmc_out_r_stream_stat_offset 24 - -/* Register r_data_descr, scope iop_dmc_out, type r */ -#define reg_iop_dmc_out_r_data_descr___ctrl___lsb 0 -#define reg_iop_dmc_out_r_data_descr___ctrl___width 8 -#define reg_iop_dmc_out_r_data_descr___stat___lsb 8 -#define reg_iop_dmc_out_r_data_descr___stat___width 8 -#define reg_iop_dmc_out_r_data_descr___md___lsb 16 -#define reg_iop_dmc_out_r_data_descr___md___width 16 -#define reg_iop_dmc_out_r_data_descr_offset 28 - -/* Register r_ctxt_descr, scope iop_dmc_out, type r */ -#define reg_iop_dmc_out_r_ctxt_descr___ctrl___lsb 0 -#define reg_iop_dmc_out_r_ctxt_descr___ctrl___width 8 -#define reg_iop_dmc_out_r_ctxt_descr___stat___lsb 8 -#define reg_iop_dmc_out_r_ctxt_descr___stat___width 8 -#define reg_iop_dmc_out_r_ctxt_descr___md0___lsb 16 -#define reg_iop_dmc_out_r_ctxt_descr___md0___width 16 -#define reg_iop_dmc_out_r_ctxt_descr_offset 32 - -/* Register r_ctxt_descr_md1, scope iop_dmc_out, type r */ -#define reg_iop_dmc_out_r_ctxt_descr_md1_offset 36 - -/* Register r_ctxt_descr_md2, scope iop_dmc_out, type r */ -#define reg_iop_dmc_out_r_ctxt_descr_md2_offset 40 - -/* Register r_group_descr, scope iop_dmc_out, type r */ -#define reg_iop_dmc_out_r_group_descr___ctrl___lsb 0 -#define reg_iop_dmc_out_r_group_descr___ctrl___width 8 -#define reg_iop_dmc_out_r_group_descr___stat___lsb 8 -#define reg_iop_dmc_out_r_group_descr___stat___width 8 -#define reg_iop_dmc_out_r_group_descr___md___lsb 16 -#define reg_iop_dmc_out_r_group_descr___md___width 16 -#define reg_iop_dmc_out_r_group_descr_offset 52 - -/* Register rw_data_descr, scope iop_dmc_out, type rw */ -#define reg_iop_dmc_out_rw_data_descr___md___lsb 16 -#define reg_iop_dmc_out_rw_data_descr___md___width 16 -#define reg_iop_dmc_out_rw_data_descr_offset 56 - -/* Register rw_ctxt_descr, scope iop_dmc_out, type rw */ -#define reg_iop_dmc_out_rw_ctxt_descr___md0___lsb 16 -#define reg_iop_dmc_out_rw_ctxt_descr___md0___width 16 -#define reg_iop_dmc_out_rw_ctxt_descr_offset 60 - -/* Register rw_ctxt_descr_md1, scope iop_dmc_out, type rw */ -#define reg_iop_dmc_out_rw_ctxt_descr_md1_offset 64 - -/* Register rw_ctxt_descr_md2, scope iop_dmc_out, type rw */ -#define reg_iop_dmc_out_rw_ctxt_descr_md2_offset 68 - -/* Register rw_group_descr, scope iop_dmc_out, type rw */ -#define reg_iop_dmc_out_rw_group_descr___md___lsb 16 -#define reg_iop_dmc_out_rw_group_descr___md___width 16 -#define reg_iop_dmc_out_rw_group_descr_offset 80 - -/* Register rw_intr_mask, scope iop_dmc_out, type rw */ -#define reg_iop_dmc_out_rw_intr_mask___data_md___lsb 0 -#define reg_iop_dmc_out_rw_intr_mask___data_md___width 1 -#define reg_iop_dmc_out_rw_intr_mask___data_md___bit 0 -#define reg_iop_dmc_out_rw_intr_mask___ctxt_md___lsb 1 -#define reg_iop_dmc_out_rw_intr_mask___ctxt_md___width 1 -#define reg_iop_dmc_out_rw_intr_mask___ctxt_md___bit 1 -#define reg_iop_dmc_out_rw_intr_mask___group_md___lsb 2 -#define reg_iop_dmc_out_rw_intr_mask___group_md___width 1 -#define reg_iop_dmc_out_rw_intr_mask___group_md___bit 2 -#define reg_iop_dmc_out_rw_intr_mask___cmd_rdy___lsb 3 -#define reg_iop_dmc_out_rw_intr_mask___cmd_rdy___width 1 -#define reg_iop_dmc_out_rw_intr_mask___cmd_rdy___bit 3 -#define reg_iop_dmc_out_rw_intr_mask___dth___lsb 4 -#define reg_iop_dmc_out_rw_intr_mask___dth___width 1 -#define reg_iop_dmc_out_rw_intr_mask___dth___bit 4 -#define reg_iop_dmc_out_rw_intr_mask___dv___lsb 5 -#define reg_iop_dmc_out_rw_intr_mask___dv___width 1 -#define reg_iop_dmc_out_rw_intr_mask___dv___bit 5 -#define reg_iop_dmc_out_rw_intr_mask___last_data___lsb 6 -#define reg_iop_dmc_out_rw_intr_mask___last_data___width 1 -#define reg_iop_dmc_out_rw_intr_mask___last_data___bit 6 -#define reg_iop_dmc_out_rw_intr_mask___trf_lim___lsb 7 -#define reg_iop_dmc_out_rw_intr_mask___trf_lim___width 1 -#define reg_iop_dmc_out_rw_intr_mask___trf_lim___bit 7 -#define reg_iop_dmc_out_rw_intr_mask___cmd_rq___lsb 8 -#define reg_iop_dmc_out_rw_intr_mask___cmd_rq___width 1 -#define reg_iop_dmc_out_rw_intr_mask___cmd_rq___bit 8 -#define reg_iop_dmc_out_rw_intr_mask_offset 84 - -/* Register rw_ack_intr, scope iop_dmc_out, type rw */ -#define reg_iop_dmc_out_rw_ack_intr___data_md___lsb 0 -#define reg_iop_dmc_out_rw_ack_intr___data_md___width 1 -#define reg_iop_dmc_out_rw_ack_intr___data_md___bit 0 -#define reg_iop_dmc_out_rw_ack_intr___ctxt_md___lsb 1 -#define reg_iop_dmc_out_rw_ack_intr___ctxt_md___width 1 -#define reg_iop_dmc_out_rw_ack_intr___ctxt_md___bit 1 -#define reg_iop_dmc_out_rw_ack_intr___group_md___lsb 2 -#define reg_iop_dmc_out_rw_ack_intr___group_md___width 1 -#define reg_iop_dmc_out_rw_ack_intr___group_md___bit 2 -#define reg_iop_dmc_out_rw_ack_intr___cmd_rdy___lsb 3 -#define reg_iop_dmc_out_rw_ack_intr___cmd_rdy___width 1 -#define reg_iop_dmc_out_rw_ack_intr___cmd_rdy___bit 3 -#define reg_iop_dmc_out_rw_ack_intr___dth___lsb 4 -#define reg_iop_dmc_out_rw_ack_intr___dth___width 1 -#define reg_iop_dmc_out_rw_ack_intr___dth___bit 4 -#define reg_iop_dmc_out_rw_ack_intr___dv___lsb 5 -#define reg_iop_dmc_out_rw_ack_intr___dv___width 1 -#define reg_iop_dmc_out_rw_ack_intr___dv___bit 5 -#define reg_iop_dmc_out_rw_ack_intr___last_data___lsb 6 -#define reg_iop_dmc_out_rw_ack_intr___last_data___width 1 -#define reg_iop_dmc_out_rw_ack_intr___last_data___bit 6 -#define reg_iop_dmc_out_rw_ack_intr___trf_lim___lsb 7 -#define reg_iop_dmc_out_rw_ack_intr___trf_lim___width 1 -#define reg_iop_dmc_out_rw_ack_intr___trf_lim___bit 7 -#define reg_iop_dmc_out_rw_ack_intr___cmd_rq___lsb 8 -#define reg_iop_dmc_out_rw_ack_intr___cmd_rq___width 1 -#define reg_iop_dmc_out_rw_ack_intr___cmd_rq___bit 8 -#define reg_iop_dmc_out_rw_ack_intr_offset 88 - -/* Register r_intr, scope iop_dmc_out, type r */ -#define reg_iop_dmc_out_r_intr___data_md___lsb 0 -#define reg_iop_dmc_out_r_intr___data_md___width 1 -#define reg_iop_dmc_out_r_intr___data_md___bit 0 -#define reg_iop_dmc_out_r_intr___ctxt_md___lsb 1 -#define reg_iop_dmc_out_r_intr___ctxt_md___width 1 -#define reg_iop_dmc_out_r_intr___ctxt_md___bit 1 -#define reg_iop_dmc_out_r_intr___group_md___lsb 2 -#define reg_iop_dmc_out_r_intr___group_md___width 1 -#define reg_iop_dmc_out_r_intr___group_md___bit 2 -#define reg_iop_dmc_out_r_intr___cmd_rdy___lsb 3 -#define reg_iop_dmc_out_r_intr___cmd_rdy___width 1 -#define reg_iop_dmc_out_r_intr___cmd_rdy___bit 3 -#define reg_iop_dmc_out_r_intr___dth___lsb 4 -#define reg_iop_dmc_out_r_intr___dth___width 1 -#define reg_iop_dmc_out_r_intr___dth___bit 4 -#define reg_iop_dmc_out_r_intr___dv___lsb 5 -#define reg_iop_dmc_out_r_intr___dv___width 1 -#define reg_iop_dmc_out_r_intr___dv___bit 5 -#define reg_iop_dmc_out_r_intr___last_data___lsb 6 -#define reg_iop_dmc_out_r_intr___last_data___width 1 -#define reg_iop_dmc_out_r_intr___last_data___bit 6 -#define reg_iop_dmc_out_r_intr___trf_lim___lsb 7 -#define reg_iop_dmc_out_r_intr___trf_lim___width 1 -#define reg_iop_dmc_out_r_intr___trf_lim___bit 7 -#define reg_iop_dmc_out_r_intr___cmd_rq___lsb 8 -#define reg_iop_dmc_out_r_intr___cmd_rq___width 1 -#define reg_iop_dmc_out_r_intr___cmd_rq___bit 8 -#define reg_iop_dmc_out_r_intr_offset 92 - -/* Register r_masked_intr, scope iop_dmc_out, type r */ -#define reg_iop_dmc_out_r_masked_intr___data_md___lsb 0 -#define reg_iop_dmc_out_r_masked_intr___data_md___width 1 -#define reg_iop_dmc_out_r_masked_intr___data_md___bit 0 -#define reg_iop_dmc_out_r_masked_intr___ctxt_md___lsb 1 -#define reg_iop_dmc_out_r_masked_intr___ctxt_md___width 1 -#define reg_iop_dmc_out_r_masked_intr___ctxt_md___bit 1 -#define reg_iop_dmc_out_r_masked_intr___group_md___lsb 2 -#define reg_iop_dmc_out_r_masked_intr___group_md___width 1 -#define reg_iop_dmc_out_r_masked_intr___group_md___bit 2 -#define reg_iop_dmc_out_r_masked_intr___cmd_rdy___lsb 3 -#define reg_iop_dmc_out_r_masked_intr___cmd_rdy___width 1 -#define reg_iop_dmc_out_r_masked_intr___cmd_rdy___bit 3 -#define reg_iop_dmc_out_r_masked_intr___dth___lsb 4 -#define reg_iop_dmc_out_r_masked_intr___dth___width 1 -#define reg_iop_dmc_out_r_masked_intr___dth___bit 4 -#define reg_iop_dmc_out_r_masked_intr___dv___lsb 5 -#define reg_iop_dmc_out_r_masked_intr___dv___width 1 -#define reg_iop_dmc_out_r_masked_intr___dv___bit 5 -#define reg_iop_dmc_out_r_masked_intr___last_data___lsb 6 -#define reg_iop_dmc_out_r_masked_intr___last_data___width 1 -#define reg_iop_dmc_out_r_masked_intr___last_data___bit 6 -#define reg_iop_dmc_out_r_masked_intr___trf_lim___lsb 7 -#define reg_iop_dmc_out_r_masked_intr___trf_lim___width 1 -#define reg_iop_dmc_out_r_masked_intr___trf_lim___bit 7 -#define reg_iop_dmc_out_r_masked_intr___cmd_rq___lsb 8 -#define reg_iop_dmc_out_r_masked_intr___cmd_rq___width 1 -#define reg_iop_dmc_out_r_masked_intr___cmd_rq___bit 8 -#define reg_iop_dmc_out_r_masked_intr_offset 96 - - -/* Constants */ -#define regk_iop_dmc_out_ack_pkt 0x00000100 -#define regk_iop_dmc_out_array 0x00000008 -#define regk_iop_dmc_out_burst 0x00000020 -#define regk_iop_dmc_out_copy_next 0x00000010 -#define regk_iop_dmc_out_copy_up 0x00000020 -#define regk_iop_dmc_out_dis_c 0x00000010 -#define regk_iop_dmc_out_dis_g 0x00000020 -#define regk_iop_dmc_out_lim1 0x00000000 -#define regk_iop_dmc_out_lim16 0x00000004 -#define regk_iop_dmc_out_lim2 0x00000001 -#define regk_iop_dmc_out_lim32 0x00000005 -#define regk_iop_dmc_out_lim4 0x00000002 -#define regk_iop_dmc_out_lim64 0x00000006 -#define regk_iop_dmc_out_lim8 0x00000003 -#define regk_iop_dmc_out_load_c 0x00000200 -#define regk_iop_dmc_out_load_c_n 0x00000280 -#define regk_iop_dmc_out_load_c_next 0x00000240 -#define regk_iop_dmc_out_load_d 0x00000140 -#define regk_iop_dmc_out_load_g 0x00000300 -#define regk_iop_dmc_out_load_g_down 0x000003c0 -#define regk_iop_dmc_out_load_g_next 0x00000340 -#define regk_iop_dmc_out_load_g_up 0x00000380 -#define regk_iop_dmc_out_next_en 0x00000010 -#define regk_iop_dmc_out_next_pkt 0x00000010 -#define regk_iop_dmc_out_no 0x00000000 -#define regk_iop_dmc_out_restore 0x00000020 -#define regk_iop_dmc_out_rw_cfg_default 0x00000000 -#define regk_iop_dmc_out_rw_ctxt_descr_default 0x00000000 -#define regk_iop_dmc_out_rw_ctxt_descr_md1_default 0x00000000 -#define regk_iop_dmc_out_rw_ctxt_descr_md2_default 0x00000000 -#define regk_iop_dmc_out_rw_data_descr_default 0x00000000 -#define regk_iop_dmc_out_rw_group_descr_default 0x00000000 -#define regk_iop_dmc_out_rw_intr_mask_default 0x00000000 -#define regk_iop_dmc_out_save_down 0x00000020 -#define regk_iop_dmc_out_save_up 0x00000020 -#define regk_iop_dmc_out_set_reg 0x00000050 -#define regk_iop_dmc_out_set_w_size1 0x00000190 -#define regk_iop_dmc_out_set_w_size2 0x000001a0 -#define regk_iop_dmc_out_set_w_size4 0x000001c0 -#define regk_iop_dmc_out_store_c 0x00000002 -#define regk_iop_dmc_out_store_descr 0x00000000 -#define regk_iop_dmc_out_store_g 0x00000004 -#define regk_iop_dmc_out_store_md 0x00000001 -#define regk_iop_dmc_out_update_down 0x00000020 -#define regk_iop_dmc_out_yes 0x00000001 -#endif /* __iop_dmc_out_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h deleted file mode 100644 index 974dee082f9f..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h +++ /dev/null @@ -1,234 +0,0 @@ -#ifndef __iop_fifo_in_defs_asm_h -#define __iop_fifo_in_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_fifo_in.r - * id: - * last modfied: Mon Apr 11 16:10:07 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_in_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_in.r - * id: $Id: iop_fifo_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope iop_fifo_in, type rw */ -#define reg_iop_fifo_in_rw_cfg___avail_lim___lsb 0 -#define reg_iop_fifo_in_rw_cfg___avail_lim___width 3 -#define reg_iop_fifo_in_rw_cfg___byte_order___lsb 3 -#define reg_iop_fifo_in_rw_cfg___byte_order___width 2 -#define reg_iop_fifo_in_rw_cfg___trig___lsb 5 -#define reg_iop_fifo_in_rw_cfg___trig___width 2 -#define reg_iop_fifo_in_rw_cfg___last_dis_dif_in___lsb 7 -#define reg_iop_fifo_in_rw_cfg___last_dis_dif_in___width 1 -#define reg_iop_fifo_in_rw_cfg___last_dis_dif_in___bit 7 -#define reg_iop_fifo_in_rw_cfg___mode___lsb 8 -#define reg_iop_fifo_in_rw_cfg___mode___width 2 -#define reg_iop_fifo_in_rw_cfg_offset 0 - -/* Register rw_ctrl, scope iop_fifo_in, type rw */ -#define reg_iop_fifo_in_rw_ctrl___dif_in_en___lsb 0 -#define reg_iop_fifo_in_rw_ctrl___dif_in_en___width 1 -#define reg_iop_fifo_in_rw_ctrl___dif_in_en___bit 0 -#define reg_iop_fifo_in_rw_ctrl___dif_out_en___lsb 1 -#define reg_iop_fifo_in_rw_ctrl___dif_out_en___width 1 -#define reg_iop_fifo_in_rw_ctrl___dif_out_en___bit 1 -#define reg_iop_fifo_in_rw_ctrl_offset 4 - -/* Register r_stat, scope iop_fifo_in, type r */ -#define reg_iop_fifo_in_r_stat___avail_bytes___lsb 0 -#define reg_iop_fifo_in_r_stat___avail_bytes___width 4 -#define reg_iop_fifo_in_r_stat___last___lsb 4 -#define reg_iop_fifo_in_r_stat___last___width 8 -#define reg_iop_fifo_in_r_stat___dif_in_en___lsb 12 -#define reg_iop_fifo_in_r_stat___dif_in_en___width 1 -#define reg_iop_fifo_in_r_stat___dif_in_en___bit 12 -#define reg_iop_fifo_in_r_stat___dif_out_en___lsb 13 -#define reg_iop_fifo_in_r_stat___dif_out_en___width 1 -#define reg_iop_fifo_in_r_stat___dif_out_en___bit 13 -#define reg_iop_fifo_in_r_stat_offset 8 - -/* Register rs_rd1byte, scope iop_fifo_in, type rs */ -#define reg_iop_fifo_in_rs_rd1byte___data___lsb 0 -#define reg_iop_fifo_in_rs_rd1byte___data___width 8 -#define reg_iop_fifo_in_rs_rd1byte_offset 12 - -/* Register r_rd1byte, scope iop_fifo_in, type r */ -#define reg_iop_fifo_in_r_rd1byte___data___lsb 0 -#define reg_iop_fifo_in_r_rd1byte___data___width 8 -#define reg_iop_fifo_in_r_rd1byte_offset 16 - -/* Register rs_rd2byte, scope iop_fifo_in, type rs */ -#define reg_iop_fifo_in_rs_rd2byte___data___lsb 0 -#define reg_iop_fifo_in_rs_rd2byte___data___width 16 -#define reg_iop_fifo_in_rs_rd2byte_offset 20 - -/* Register r_rd2byte, scope iop_fifo_in, type r */ -#define reg_iop_fifo_in_r_rd2byte___data___lsb 0 -#define reg_iop_fifo_in_r_rd2byte___data___width 16 -#define reg_iop_fifo_in_r_rd2byte_offset 24 - -/* Register rs_rd3byte, scope iop_fifo_in, type rs */ -#define reg_iop_fifo_in_rs_rd3byte___data___lsb 0 -#define reg_iop_fifo_in_rs_rd3byte___data___width 24 -#define reg_iop_fifo_in_rs_rd3byte_offset 28 - -/* Register r_rd3byte, scope iop_fifo_in, type r */ -#define reg_iop_fifo_in_r_rd3byte___data___lsb 0 -#define reg_iop_fifo_in_r_rd3byte___data___width 24 -#define reg_iop_fifo_in_r_rd3byte_offset 32 - -/* Register rs_rd4byte, scope iop_fifo_in, type rs */ -#define reg_iop_fifo_in_rs_rd4byte___data___lsb 0 -#define reg_iop_fifo_in_rs_rd4byte___data___width 32 -#define reg_iop_fifo_in_rs_rd4byte_offset 36 - -/* Register r_rd4byte, scope iop_fifo_in, type r */ -#define reg_iop_fifo_in_r_rd4byte___data___lsb 0 -#define reg_iop_fifo_in_r_rd4byte___data___width 32 -#define reg_iop_fifo_in_r_rd4byte_offset 40 - -/* Register rw_set_last, scope iop_fifo_in, type rw */ -#define reg_iop_fifo_in_rw_set_last_offset 44 - -/* Register rw_strb_dif_in, scope iop_fifo_in, type rw */ -#define reg_iop_fifo_in_rw_strb_dif_in___last___lsb 0 -#define reg_iop_fifo_in_rw_strb_dif_in___last___width 2 -#define reg_iop_fifo_in_rw_strb_dif_in_offset 48 - -/* Register rw_intr_mask, scope iop_fifo_in, type rw */ -#define reg_iop_fifo_in_rw_intr_mask___urun___lsb 0 -#define reg_iop_fifo_in_rw_intr_mask___urun___width 1 -#define reg_iop_fifo_in_rw_intr_mask___urun___bit 0 -#define reg_iop_fifo_in_rw_intr_mask___last_data___lsb 1 -#define reg_iop_fifo_in_rw_intr_mask___last_data___width 1 -#define reg_iop_fifo_in_rw_intr_mask___last_data___bit 1 -#define reg_iop_fifo_in_rw_intr_mask___dav___lsb 2 -#define reg_iop_fifo_in_rw_intr_mask___dav___width 1 -#define reg_iop_fifo_in_rw_intr_mask___dav___bit 2 -#define reg_iop_fifo_in_rw_intr_mask___avail___lsb 3 -#define reg_iop_fifo_in_rw_intr_mask___avail___width 1 -#define reg_iop_fifo_in_rw_intr_mask___avail___bit 3 -#define reg_iop_fifo_in_rw_intr_mask___orun___lsb 4 -#define reg_iop_fifo_in_rw_intr_mask___orun___width 1 -#define reg_iop_fifo_in_rw_intr_mask___orun___bit 4 -#define reg_iop_fifo_in_rw_intr_mask_offset 52 - -/* Register rw_ack_intr, scope iop_fifo_in, type rw */ -#define reg_iop_fifo_in_rw_ack_intr___urun___lsb 0 -#define reg_iop_fifo_in_rw_ack_intr___urun___width 1 -#define reg_iop_fifo_in_rw_ack_intr___urun___bit 0 -#define reg_iop_fifo_in_rw_ack_intr___last_data___lsb 1 -#define reg_iop_fifo_in_rw_ack_intr___last_data___width 1 -#define reg_iop_fifo_in_rw_ack_intr___last_data___bit 1 -#define reg_iop_fifo_in_rw_ack_intr___dav___lsb 2 -#define reg_iop_fifo_in_rw_ack_intr___dav___width 1 -#define reg_iop_fifo_in_rw_ack_intr___dav___bit 2 -#define reg_iop_fifo_in_rw_ack_intr___avail___lsb 3 -#define reg_iop_fifo_in_rw_ack_intr___avail___width 1 -#define reg_iop_fifo_in_rw_ack_intr___avail___bit 3 -#define reg_iop_fifo_in_rw_ack_intr___orun___lsb 4 -#define reg_iop_fifo_in_rw_ack_intr___orun___width 1 -#define reg_iop_fifo_in_rw_ack_intr___orun___bit 4 -#define reg_iop_fifo_in_rw_ack_intr_offset 56 - -/* Register r_intr, scope iop_fifo_in, type r */ -#define reg_iop_fifo_in_r_intr___urun___lsb 0 -#define reg_iop_fifo_in_r_intr___urun___width 1 -#define reg_iop_fifo_in_r_intr___urun___bit 0 -#define reg_iop_fifo_in_r_intr___last_data___lsb 1 -#define reg_iop_fifo_in_r_intr___last_data___width 1 -#define reg_iop_fifo_in_r_intr___last_data___bit 1 -#define reg_iop_fifo_in_r_intr___dav___lsb 2 -#define reg_iop_fifo_in_r_intr___dav___width 1 -#define reg_iop_fifo_in_r_intr___dav___bit 2 -#define reg_iop_fifo_in_r_intr___avail___lsb 3 -#define reg_iop_fifo_in_r_intr___avail___width 1 -#define reg_iop_fifo_in_r_intr___avail___bit 3 -#define reg_iop_fifo_in_r_intr___orun___lsb 4 -#define reg_iop_fifo_in_r_intr___orun___width 1 -#define reg_iop_fifo_in_r_intr___orun___bit 4 -#define reg_iop_fifo_in_r_intr_offset 60 - -/* Register r_masked_intr, scope iop_fifo_in, type r */ -#define reg_iop_fifo_in_r_masked_intr___urun___lsb 0 -#define reg_iop_fifo_in_r_masked_intr___urun___width 1 -#define reg_iop_fifo_in_r_masked_intr___urun___bit 0 -#define reg_iop_fifo_in_r_masked_intr___last_data___lsb 1 -#define reg_iop_fifo_in_r_masked_intr___last_data___width 1 -#define reg_iop_fifo_in_r_masked_intr___last_data___bit 1 -#define reg_iop_fifo_in_r_masked_intr___dav___lsb 2 -#define reg_iop_fifo_in_r_masked_intr___dav___width 1 -#define reg_iop_fifo_in_r_masked_intr___dav___bit 2 -#define reg_iop_fifo_in_r_masked_intr___avail___lsb 3 -#define reg_iop_fifo_in_r_masked_intr___avail___width 1 -#define reg_iop_fifo_in_r_masked_intr___avail___bit 3 -#define reg_iop_fifo_in_r_masked_intr___orun___lsb 4 -#define reg_iop_fifo_in_r_masked_intr___orun___width 1 -#define reg_iop_fifo_in_r_masked_intr___orun___bit 4 -#define reg_iop_fifo_in_r_masked_intr_offset 64 - - -/* Constants */ -#define regk_iop_fifo_in_dif_in 0x00000002 -#define regk_iop_fifo_in_hi 0x00000000 -#define regk_iop_fifo_in_neg 0x00000002 -#define regk_iop_fifo_in_no 0x00000000 -#define regk_iop_fifo_in_order16 0x00000001 -#define regk_iop_fifo_in_order24 0x00000002 -#define regk_iop_fifo_in_order32 0x00000003 -#define regk_iop_fifo_in_order8 0x00000000 -#define regk_iop_fifo_in_pos 0x00000001 -#define regk_iop_fifo_in_pos_neg 0x00000003 -#define regk_iop_fifo_in_rw_cfg_default 0x00000024 -#define regk_iop_fifo_in_rw_ctrl_default 0x00000000 -#define regk_iop_fifo_in_rw_intr_mask_default 0x00000000 -#define regk_iop_fifo_in_rw_set_last_default 0x00000000 -#define regk_iop_fifo_in_rw_strb_dif_in_default 0x00000000 -#define regk_iop_fifo_in_size16 0x00000002 -#define regk_iop_fifo_in_size24 0x00000001 -#define regk_iop_fifo_in_size32 0x00000000 -#define regk_iop_fifo_in_size8 0x00000003 -#define regk_iop_fifo_in_yes 0x00000001 -#endif /* __iop_fifo_in_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h deleted file mode 100644 index e00fab0c9335..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef __iop_fifo_in_extra_defs_asm_h -#define __iop_fifo_in_extra_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_fifo_in_extra.r - * id: - * last modfied: Mon Apr 11 16:10:08 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_in_extra_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_in_extra.r - * id: $Id: iop_fifo_in_extra_defs_asm.h,v 1.1 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_wr_data, scope iop_fifo_in_extra, type rw */ -#define reg_iop_fifo_in_extra_rw_wr_data_offset 0 - -/* Register r_stat, scope iop_fifo_in_extra, type r */ -#define reg_iop_fifo_in_extra_r_stat___avail_bytes___lsb 0 -#define reg_iop_fifo_in_extra_r_stat___avail_bytes___width 4 -#define reg_iop_fifo_in_extra_r_stat___last___lsb 4 -#define reg_iop_fifo_in_extra_r_stat___last___width 8 -#define reg_iop_fifo_in_extra_r_stat___dif_in_en___lsb 12 -#define reg_iop_fifo_in_extra_r_stat___dif_in_en___width 1 -#define reg_iop_fifo_in_extra_r_stat___dif_in_en___bit 12 -#define reg_iop_fifo_in_extra_r_stat___dif_out_en___lsb 13 -#define reg_iop_fifo_in_extra_r_stat___dif_out_en___width 1 -#define reg_iop_fifo_in_extra_r_stat___dif_out_en___bit 13 -#define reg_iop_fifo_in_extra_r_stat_offset 4 - -/* Register rw_strb_dif_in, scope iop_fifo_in_extra, type rw */ -#define reg_iop_fifo_in_extra_rw_strb_dif_in___last___lsb 0 -#define reg_iop_fifo_in_extra_rw_strb_dif_in___last___width 2 -#define reg_iop_fifo_in_extra_rw_strb_dif_in_offset 8 - -/* Register rw_intr_mask, scope iop_fifo_in_extra, type rw */ -#define reg_iop_fifo_in_extra_rw_intr_mask___urun___lsb 0 -#define reg_iop_fifo_in_extra_rw_intr_mask___urun___width 1 -#define reg_iop_fifo_in_extra_rw_intr_mask___urun___bit 0 -#define reg_iop_fifo_in_extra_rw_intr_mask___last_data___lsb 1 -#define reg_iop_fifo_in_extra_rw_intr_mask___last_data___width 1 -#define reg_iop_fifo_in_extra_rw_intr_mask___last_data___bit 1 -#define reg_iop_fifo_in_extra_rw_intr_mask___dav___lsb 2 -#define reg_iop_fifo_in_extra_rw_intr_mask___dav___width 1 -#define reg_iop_fifo_in_extra_rw_intr_mask___dav___bit 2 -#define reg_iop_fifo_in_extra_rw_intr_mask___avail___lsb 3 -#define reg_iop_fifo_in_extra_rw_intr_mask___avail___width 1 -#define reg_iop_fifo_in_extra_rw_intr_mask___avail___bit 3 -#define reg_iop_fifo_in_extra_rw_intr_mask___orun___lsb 4 -#define reg_iop_fifo_in_extra_rw_intr_mask___orun___width 1 -#define reg_iop_fifo_in_extra_rw_intr_mask___orun___bit 4 -#define reg_iop_fifo_in_extra_rw_intr_mask_offset 12 - -/* Register rw_ack_intr, scope iop_fifo_in_extra, type rw */ -#define reg_iop_fifo_in_extra_rw_ack_intr___urun___lsb 0 -#define reg_iop_fifo_in_extra_rw_ack_intr___urun___width 1 -#define reg_iop_fifo_in_extra_rw_ack_intr___urun___bit 0 -#define reg_iop_fifo_in_extra_rw_ack_intr___last_data___lsb 1 -#define reg_iop_fifo_in_extra_rw_ack_intr___last_data___width 1 -#define reg_iop_fifo_in_extra_rw_ack_intr___last_data___bit 1 -#define reg_iop_fifo_in_extra_rw_ack_intr___dav___lsb 2 -#define reg_iop_fifo_in_extra_rw_ack_intr___dav___width 1 -#define reg_iop_fifo_in_extra_rw_ack_intr___dav___bit 2 -#define reg_iop_fifo_in_extra_rw_ack_intr___avail___lsb 3 -#define reg_iop_fifo_in_extra_rw_ack_intr___avail___width 1 -#define reg_iop_fifo_in_extra_rw_ack_intr___avail___bit 3 -#define reg_iop_fifo_in_extra_rw_ack_intr___orun___lsb 4 -#define reg_iop_fifo_in_extra_rw_ack_intr___orun___width 1 -#define reg_iop_fifo_in_extra_rw_ack_intr___orun___bit 4 -#define reg_iop_fifo_in_extra_rw_ack_intr_offset 16 - -/* Register r_intr, scope iop_fifo_in_extra, type r */ -#define reg_iop_fifo_in_extra_r_intr___urun___lsb 0 -#define reg_iop_fifo_in_extra_r_intr___urun___width 1 -#define reg_iop_fifo_in_extra_r_intr___urun___bit 0 -#define reg_iop_fifo_in_extra_r_intr___last_data___lsb 1 -#define reg_iop_fifo_in_extra_r_intr___last_data___width 1 -#define reg_iop_fifo_in_extra_r_intr___last_data___bit 1 -#define reg_iop_fifo_in_extra_r_intr___dav___lsb 2 -#define reg_iop_fifo_in_extra_r_intr___dav___width 1 -#define reg_iop_fifo_in_extra_r_intr___dav___bit 2 -#define reg_iop_fifo_in_extra_r_intr___avail___lsb 3 -#define reg_iop_fifo_in_extra_r_intr___avail___width 1 -#define reg_iop_fifo_in_extra_r_intr___avail___bit 3 -#define reg_iop_fifo_in_extra_r_intr___orun___lsb 4 -#define reg_iop_fifo_in_extra_r_intr___orun___width 1 -#define reg_iop_fifo_in_extra_r_intr___orun___bit 4 -#define reg_iop_fifo_in_extra_r_intr_offset 20 - -/* Register r_masked_intr, scope iop_fifo_in_extra, type r */ -#define reg_iop_fifo_in_extra_r_masked_intr___urun___lsb 0 -#define reg_iop_fifo_in_extra_r_masked_intr___urun___width 1 -#define reg_iop_fifo_in_extra_r_masked_intr___urun___bit 0 -#define reg_iop_fifo_in_extra_r_masked_intr___last_data___lsb 1 -#define reg_iop_fifo_in_extra_r_masked_intr___last_data___width 1 -#define reg_iop_fifo_in_extra_r_masked_intr___last_data___bit 1 -#define reg_iop_fifo_in_extra_r_masked_intr___dav___lsb 2 -#define reg_iop_fifo_in_extra_r_masked_intr___dav___width 1 -#define reg_iop_fifo_in_extra_r_masked_intr___dav___bit 2 -#define reg_iop_fifo_in_extra_r_masked_intr___avail___lsb 3 -#define reg_iop_fifo_in_extra_r_masked_intr___avail___width 1 -#define reg_iop_fifo_in_extra_r_masked_intr___avail___bit 3 -#define reg_iop_fifo_in_extra_r_masked_intr___orun___lsb 4 -#define reg_iop_fifo_in_extra_r_masked_intr___orun___width 1 -#define reg_iop_fifo_in_extra_r_masked_intr___orun___bit 4 -#define reg_iop_fifo_in_extra_r_masked_intr_offset 24 - - -/* Constants */ -#define regk_iop_fifo_in_extra_fifo_in 0x00000002 -#define regk_iop_fifo_in_extra_no 0x00000000 -#define regk_iop_fifo_in_extra_rw_intr_mask_default 0x00000000 -#define regk_iop_fifo_in_extra_yes 0x00000001 -#endif /* __iop_fifo_in_extra_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h deleted file mode 100644 index 9ec5f4a826df..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h +++ /dev/null @@ -1,254 +0,0 @@ -#ifndef __iop_fifo_out_defs_asm_h -#define __iop_fifo_out_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_fifo_out.r - * id: - * last modfied: Mon Apr 11 16:10:09 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_out_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_out.r - * id: $Id: iop_fifo_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_cfg___free_lim___lsb 0 -#define reg_iop_fifo_out_rw_cfg___free_lim___width 3 -#define reg_iop_fifo_out_rw_cfg___byte_order___lsb 3 -#define reg_iop_fifo_out_rw_cfg___byte_order___width 2 -#define reg_iop_fifo_out_rw_cfg___trig___lsb 5 -#define reg_iop_fifo_out_rw_cfg___trig___width 2 -#define reg_iop_fifo_out_rw_cfg___last_dis_dif_in___lsb 7 -#define reg_iop_fifo_out_rw_cfg___last_dis_dif_in___width 1 -#define reg_iop_fifo_out_rw_cfg___last_dis_dif_in___bit 7 -#define reg_iop_fifo_out_rw_cfg___mode___lsb 8 -#define reg_iop_fifo_out_rw_cfg___mode___width 2 -#define reg_iop_fifo_out_rw_cfg___delay_out_last___lsb 10 -#define reg_iop_fifo_out_rw_cfg___delay_out_last___width 1 -#define reg_iop_fifo_out_rw_cfg___delay_out_last___bit 10 -#define reg_iop_fifo_out_rw_cfg___last_dis_dif_out___lsb 11 -#define reg_iop_fifo_out_rw_cfg___last_dis_dif_out___width 1 -#define reg_iop_fifo_out_rw_cfg___last_dis_dif_out___bit 11 -#define reg_iop_fifo_out_rw_cfg_offset 0 - -/* Register rw_ctrl, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_ctrl___dif_in_en___lsb 0 -#define reg_iop_fifo_out_rw_ctrl___dif_in_en___width 1 -#define reg_iop_fifo_out_rw_ctrl___dif_in_en___bit 0 -#define reg_iop_fifo_out_rw_ctrl___dif_out_en___lsb 1 -#define reg_iop_fifo_out_rw_ctrl___dif_out_en___width 1 -#define reg_iop_fifo_out_rw_ctrl___dif_out_en___bit 1 -#define reg_iop_fifo_out_rw_ctrl_offset 4 - -/* Register r_stat, scope iop_fifo_out, type r */ -#define reg_iop_fifo_out_r_stat___avail_bytes___lsb 0 -#define reg_iop_fifo_out_r_stat___avail_bytes___width 4 -#define reg_iop_fifo_out_r_stat___last___lsb 4 -#define reg_iop_fifo_out_r_stat___last___width 8 -#define reg_iop_fifo_out_r_stat___dif_in_en___lsb 12 -#define reg_iop_fifo_out_r_stat___dif_in_en___width 1 -#define reg_iop_fifo_out_r_stat___dif_in_en___bit 12 -#define reg_iop_fifo_out_r_stat___dif_out_en___lsb 13 -#define reg_iop_fifo_out_r_stat___dif_out_en___width 1 -#define reg_iop_fifo_out_r_stat___dif_out_en___bit 13 -#define reg_iop_fifo_out_r_stat___zero_data_last___lsb 14 -#define reg_iop_fifo_out_r_stat___zero_data_last___width 1 -#define reg_iop_fifo_out_r_stat___zero_data_last___bit 14 -#define reg_iop_fifo_out_r_stat_offset 8 - -/* Register rw_wr1byte, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_wr1byte___data___lsb 0 -#define reg_iop_fifo_out_rw_wr1byte___data___width 8 -#define reg_iop_fifo_out_rw_wr1byte_offset 12 - -/* Register rw_wr2byte, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_wr2byte___data___lsb 0 -#define reg_iop_fifo_out_rw_wr2byte___data___width 16 -#define reg_iop_fifo_out_rw_wr2byte_offset 16 - -/* Register rw_wr3byte, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_wr3byte___data___lsb 0 -#define reg_iop_fifo_out_rw_wr3byte___data___width 24 -#define reg_iop_fifo_out_rw_wr3byte_offset 20 - -/* Register rw_wr4byte, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_wr4byte___data___lsb 0 -#define reg_iop_fifo_out_rw_wr4byte___data___width 32 -#define reg_iop_fifo_out_rw_wr4byte_offset 24 - -/* Register rw_wr1byte_last, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_wr1byte_last___data___lsb 0 -#define reg_iop_fifo_out_rw_wr1byte_last___data___width 8 -#define reg_iop_fifo_out_rw_wr1byte_last_offset 28 - -/* Register rw_wr2byte_last, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_wr2byte_last___data___lsb 0 -#define reg_iop_fifo_out_rw_wr2byte_last___data___width 16 -#define reg_iop_fifo_out_rw_wr2byte_last_offset 32 - -/* Register rw_wr3byte_last, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_wr3byte_last___data___lsb 0 -#define reg_iop_fifo_out_rw_wr3byte_last___data___width 24 -#define reg_iop_fifo_out_rw_wr3byte_last_offset 36 - -/* Register rw_wr4byte_last, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_wr4byte_last___data___lsb 0 -#define reg_iop_fifo_out_rw_wr4byte_last___data___width 32 -#define reg_iop_fifo_out_rw_wr4byte_last_offset 40 - -/* Register rw_set_last, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_set_last_offset 44 - -/* Register rs_rd_data, scope iop_fifo_out, type rs */ -#define reg_iop_fifo_out_rs_rd_data_offset 48 - -/* Register r_rd_data, scope iop_fifo_out, type r */ -#define reg_iop_fifo_out_r_rd_data_offset 52 - -/* Register rw_strb_dif_out, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_strb_dif_out_offset 56 - -/* Register rw_intr_mask, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_intr_mask___urun___lsb 0 -#define reg_iop_fifo_out_rw_intr_mask___urun___width 1 -#define reg_iop_fifo_out_rw_intr_mask___urun___bit 0 -#define reg_iop_fifo_out_rw_intr_mask___last_data___lsb 1 -#define reg_iop_fifo_out_rw_intr_mask___last_data___width 1 -#define reg_iop_fifo_out_rw_intr_mask___last_data___bit 1 -#define reg_iop_fifo_out_rw_intr_mask___dav___lsb 2 -#define reg_iop_fifo_out_rw_intr_mask___dav___width 1 -#define reg_iop_fifo_out_rw_intr_mask___dav___bit 2 -#define reg_iop_fifo_out_rw_intr_mask___free___lsb 3 -#define reg_iop_fifo_out_rw_intr_mask___free___width 1 -#define reg_iop_fifo_out_rw_intr_mask___free___bit 3 -#define reg_iop_fifo_out_rw_intr_mask___orun___lsb 4 -#define reg_iop_fifo_out_rw_intr_mask___orun___width 1 -#define reg_iop_fifo_out_rw_intr_mask___orun___bit 4 -#define reg_iop_fifo_out_rw_intr_mask_offset 60 - -/* Register rw_ack_intr, scope iop_fifo_out, type rw */ -#define reg_iop_fifo_out_rw_ack_intr___urun___lsb 0 -#define reg_iop_fifo_out_rw_ack_intr___urun___width 1 -#define reg_iop_fifo_out_rw_ack_intr___urun___bit 0 -#define reg_iop_fifo_out_rw_ack_intr___last_data___lsb 1 -#define reg_iop_fifo_out_rw_ack_intr___last_data___width 1 -#define reg_iop_fifo_out_rw_ack_intr___last_data___bit 1 -#define reg_iop_fifo_out_rw_ack_intr___dav___lsb 2 -#define reg_iop_fifo_out_rw_ack_intr___dav___width 1 -#define reg_iop_fifo_out_rw_ack_intr___dav___bit 2 -#define reg_iop_fifo_out_rw_ack_intr___free___lsb 3 -#define reg_iop_fifo_out_rw_ack_intr___free___width 1 -#define reg_iop_fifo_out_rw_ack_intr___free___bit 3 -#define reg_iop_fifo_out_rw_ack_intr___orun___lsb 4 -#define reg_iop_fifo_out_rw_ack_intr___orun___width 1 -#define reg_iop_fifo_out_rw_ack_intr___orun___bit 4 -#define reg_iop_fifo_out_rw_ack_intr_offset 64 - -/* Register r_intr, scope iop_fifo_out, type r */ -#define reg_iop_fifo_out_r_intr___urun___lsb 0 -#define reg_iop_fifo_out_r_intr___urun___width 1 -#define reg_iop_fifo_out_r_intr___urun___bit 0 -#define reg_iop_fifo_out_r_intr___last_data___lsb 1 -#define reg_iop_fifo_out_r_intr___last_data___width 1 -#define reg_iop_fifo_out_r_intr___last_data___bit 1 -#define reg_iop_fifo_out_r_intr___dav___lsb 2 -#define reg_iop_fifo_out_r_intr___dav___width 1 -#define reg_iop_fifo_out_r_intr___dav___bit 2 -#define reg_iop_fifo_out_r_intr___free___lsb 3 -#define reg_iop_fifo_out_r_intr___free___width 1 -#define reg_iop_fifo_out_r_intr___free___bit 3 -#define reg_iop_fifo_out_r_intr___orun___lsb 4 -#define reg_iop_fifo_out_r_intr___orun___width 1 -#define reg_iop_fifo_out_r_intr___orun___bit 4 -#define reg_iop_fifo_out_r_intr_offset 68 - -/* Register r_masked_intr, scope iop_fifo_out, type r */ -#define reg_iop_fifo_out_r_masked_intr___urun___lsb 0 -#define reg_iop_fifo_out_r_masked_intr___urun___width 1 -#define reg_iop_fifo_out_r_masked_intr___urun___bit 0 -#define reg_iop_fifo_out_r_masked_intr___last_data___lsb 1 -#define reg_iop_fifo_out_r_masked_intr___last_data___width 1 -#define reg_iop_fifo_out_r_masked_intr___last_data___bit 1 -#define reg_iop_fifo_out_r_masked_intr___dav___lsb 2 -#define reg_iop_fifo_out_r_masked_intr___dav___width 1 -#define reg_iop_fifo_out_r_masked_intr___dav___bit 2 -#define reg_iop_fifo_out_r_masked_intr___free___lsb 3 -#define reg_iop_fifo_out_r_masked_intr___free___width 1 -#define reg_iop_fifo_out_r_masked_intr___free___bit 3 -#define reg_iop_fifo_out_r_masked_intr___orun___lsb 4 -#define reg_iop_fifo_out_r_masked_intr___orun___width 1 -#define reg_iop_fifo_out_r_masked_intr___orun___bit 4 -#define reg_iop_fifo_out_r_masked_intr_offset 72 - - -/* Constants */ -#define regk_iop_fifo_out_hi 0x00000000 -#define regk_iop_fifo_out_neg 0x00000002 -#define regk_iop_fifo_out_no 0x00000000 -#define regk_iop_fifo_out_order16 0x00000001 -#define regk_iop_fifo_out_order24 0x00000002 -#define regk_iop_fifo_out_order32 0x00000003 -#define regk_iop_fifo_out_order8 0x00000000 -#define regk_iop_fifo_out_pos 0x00000001 -#define regk_iop_fifo_out_pos_neg 0x00000003 -#define regk_iop_fifo_out_rw_cfg_default 0x00000024 -#define regk_iop_fifo_out_rw_ctrl_default 0x00000000 -#define regk_iop_fifo_out_rw_intr_mask_default 0x00000000 -#define regk_iop_fifo_out_rw_set_last_default 0x00000000 -#define regk_iop_fifo_out_rw_strb_dif_out_default 0x00000000 -#define regk_iop_fifo_out_rw_wr1byte_default 0x00000000 -#define regk_iop_fifo_out_rw_wr1byte_last_default 0x00000000 -#define regk_iop_fifo_out_rw_wr2byte_default 0x00000000 -#define regk_iop_fifo_out_rw_wr2byte_last_default 0x00000000 -#define regk_iop_fifo_out_rw_wr3byte_default 0x00000000 -#define regk_iop_fifo_out_rw_wr3byte_last_default 0x00000000 -#define regk_iop_fifo_out_rw_wr4byte_default 0x00000000 -#define regk_iop_fifo_out_rw_wr4byte_last_default 0x00000000 -#define regk_iop_fifo_out_size16 0x00000002 -#define regk_iop_fifo_out_size24 0x00000001 -#define regk_iop_fifo_out_size32 0x00000000 -#define regk_iop_fifo_out_size8 0x00000003 -#define regk_iop_fifo_out_yes 0x00000001 -#endif /* __iop_fifo_out_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h deleted file mode 100644 index 0f84a50cf77c..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h +++ /dev/null @@ -1,158 +0,0 @@ -#ifndef __iop_fifo_out_extra_defs_asm_h -#define __iop_fifo_out_extra_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_fifo_out_extra.r - * id: - * last modfied: Mon Apr 11 16:10:10 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_out_extra_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_out_extra.r - * id: $Id: iop_fifo_out_extra_defs_asm.h,v 1.1 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rs_rd_data, scope iop_fifo_out_extra, type rs */ -#define reg_iop_fifo_out_extra_rs_rd_data_offset 0 - -/* Register r_rd_data, scope iop_fifo_out_extra, type r */ -#define reg_iop_fifo_out_extra_r_rd_data_offset 4 - -/* Register r_stat, scope iop_fifo_out_extra, type r */ -#define reg_iop_fifo_out_extra_r_stat___avail_bytes___lsb 0 -#define reg_iop_fifo_out_extra_r_stat___avail_bytes___width 4 -#define reg_iop_fifo_out_extra_r_stat___last___lsb 4 -#define reg_iop_fifo_out_extra_r_stat___last___width 8 -#define reg_iop_fifo_out_extra_r_stat___dif_in_en___lsb 12 -#define reg_iop_fifo_out_extra_r_stat___dif_in_en___width 1 -#define reg_iop_fifo_out_extra_r_stat___dif_in_en___bit 12 -#define reg_iop_fifo_out_extra_r_stat___dif_out_en___lsb 13 -#define reg_iop_fifo_out_extra_r_stat___dif_out_en___width 1 -#define reg_iop_fifo_out_extra_r_stat___dif_out_en___bit 13 -#define reg_iop_fifo_out_extra_r_stat___zero_data_last___lsb 14 -#define reg_iop_fifo_out_extra_r_stat___zero_data_last___width 1 -#define reg_iop_fifo_out_extra_r_stat___zero_data_last___bit 14 -#define reg_iop_fifo_out_extra_r_stat_offset 8 - -/* Register rw_strb_dif_out, scope iop_fifo_out_extra, type rw */ -#define reg_iop_fifo_out_extra_rw_strb_dif_out_offset 12 - -/* Register rw_intr_mask, scope iop_fifo_out_extra, type rw */ -#define reg_iop_fifo_out_extra_rw_intr_mask___urun___lsb 0 -#define reg_iop_fifo_out_extra_rw_intr_mask___urun___width 1 -#define reg_iop_fifo_out_extra_rw_intr_mask___urun___bit 0 -#define reg_iop_fifo_out_extra_rw_intr_mask___last_data___lsb 1 -#define reg_iop_fifo_out_extra_rw_intr_mask___last_data___width 1 -#define reg_iop_fifo_out_extra_rw_intr_mask___last_data___bit 1 -#define reg_iop_fifo_out_extra_rw_intr_mask___dav___lsb 2 -#define reg_iop_fifo_out_extra_rw_intr_mask___dav___width 1 -#define reg_iop_fifo_out_extra_rw_intr_mask___dav___bit 2 -#define reg_iop_fifo_out_extra_rw_intr_mask___free___lsb 3 -#define reg_iop_fifo_out_extra_rw_intr_mask___free___width 1 -#define reg_iop_fifo_out_extra_rw_intr_mask___free___bit 3 -#define reg_iop_fifo_out_extra_rw_intr_mask___orun___lsb 4 -#define reg_iop_fifo_out_extra_rw_intr_mask___orun___width 1 -#define reg_iop_fifo_out_extra_rw_intr_mask___orun___bit 4 -#define reg_iop_fifo_out_extra_rw_intr_mask_offset 16 - -/* Register rw_ack_intr, scope iop_fifo_out_extra, type rw */ -#define reg_iop_fifo_out_extra_rw_ack_intr___urun___lsb 0 -#define reg_iop_fifo_out_extra_rw_ack_intr___urun___width 1 -#define reg_iop_fifo_out_extra_rw_ack_intr___urun___bit 0 -#define reg_iop_fifo_out_extra_rw_ack_intr___last_data___lsb 1 -#define reg_iop_fifo_out_extra_rw_ack_intr___last_data___width 1 -#define reg_iop_fifo_out_extra_rw_ack_intr___last_data___bit 1 -#define reg_iop_fifo_out_extra_rw_ack_intr___dav___lsb 2 -#define reg_iop_fifo_out_extra_rw_ack_intr___dav___width 1 -#define reg_iop_fifo_out_extra_rw_ack_intr___dav___bit 2 -#define reg_iop_fifo_out_extra_rw_ack_intr___free___lsb 3 -#define reg_iop_fifo_out_extra_rw_ack_intr___free___width 1 -#define reg_iop_fifo_out_extra_rw_ack_intr___free___bit 3 -#define reg_iop_fifo_out_extra_rw_ack_intr___orun___lsb 4 -#define reg_iop_fifo_out_extra_rw_ack_intr___orun___width 1 -#define reg_iop_fifo_out_extra_rw_ack_intr___orun___bit 4 -#define reg_iop_fifo_out_extra_rw_ack_intr_offset 20 - -/* Register r_intr, scope iop_fifo_out_extra, type r */ -#define reg_iop_fifo_out_extra_r_intr___urun___lsb 0 -#define reg_iop_fifo_out_extra_r_intr___urun___width 1 -#define reg_iop_fifo_out_extra_r_intr___urun___bit 0 -#define reg_iop_fifo_out_extra_r_intr___last_data___lsb 1 -#define reg_iop_fifo_out_extra_r_intr___last_data___width 1 -#define reg_iop_fifo_out_extra_r_intr___last_data___bit 1 -#define reg_iop_fifo_out_extra_r_intr___dav___lsb 2 -#define reg_iop_fifo_out_extra_r_intr___dav___width 1 -#define reg_iop_fifo_out_extra_r_intr___dav___bit 2 -#define reg_iop_fifo_out_extra_r_intr___free___lsb 3 -#define reg_iop_fifo_out_extra_r_intr___free___width 1 -#define reg_iop_fifo_out_extra_r_intr___free___bit 3 -#define reg_iop_fifo_out_extra_r_intr___orun___lsb 4 -#define reg_iop_fifo_out_extra_r_intr___orun___width 1 -#define reg_iop_fifo_out_extra_r_intr___orun___bit 4 -#define reg_iop_fifo_out_extra_r_intr_offset 24 - -/* Register r_masked_intr, scope iop_fifo_out_extra, type r */ -#define reg_iop_fifo_out_extra_r_masked_intr___urun___lsb 0 -#define reg_iop_fifo_out_extra_r_masked_intr___urun___width 1 -#define reg_iop_fifo_out_extra_r_masked_intr___urun___bit 0 -#define reg_iop_fifo_out_extra_r_masked_intr___last_data___lsb 1 -#define reg_iop_fifo_out_extra_r_masked_intr___last_data___width 1 -#define reg_iop_fifo_out_extra_r_masked_intr___last_data___bit 1 -#define reg_iop_fifo_out_extra_r_masked_intr___dav___lsb 2 -#define reg_iop_fifo_out_extra_r_masked_intr___dav___width 1 -#define reg_iop_fifo_out_extra_r_masked_intr___dav___bit 2 -#define reg_iop_fifo_out_extra_r_masked_intr___free___lsb 3 -#define reg_iop_fifo_out_extra_r_masked_intr___free___width 1 -#define reg_iop_fifo_out_extra_r_masked_intr___free___bit 3 -#define reg_iop_fifo_out_extra_r_masked_intr___orun___lsb 4 -#define reg_iop_fifo_out_extra_r_masked_intr___orun___width 1 -#define reg_iop_fifo_out_extra_r_masked_intr___orun___bit 4 -#define reg_iop_fifo_out_extra_r_masked_intr_offset 28 - - -/* Constants */ -#define regk_iop_fifo_out_extra_no 0x00000000 -#define regk_iop_fifo_out_extra_rw_intr_mask_default 0x00000000 -#define regk_iop_fifo_out_extra_yes 0x00000001 -#endif /* __iop_fifo_out_extra_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h deleted file mode 100644 index 80490c82cc29..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h +++ /dev/null @@ -1,177 +0,0 @@ -#ifndef __iop_mpu_defs_asm_h -#define __iop_mpu_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_mpu.r - * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_mpu_defs_asm.h ../../inst/io_proc/rtl/iop_mpu.r - * id: $Id: iop_mpu_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -#define STRIDE_iop_mpu_rw_r 4 -/* Register rw_r, scope iop_mpu, type rw */ -#define reg_iop_mpu_rw_r_offset 0 - -/* Register rw_ctrl, scope iop_mpu, type rw */ -#define reg_iop_mpu_rw_ctrl___en___lsb 0 -#define reg_iop_mpu_rw_ctrl___en___width 1 -#define reg_iop_mpu_rw_ctrl___en___bit 0 -#define reg_iop_mpu_rw_ctrl_offset 128 - -/* Register r_pc, scope iop_mpu, type r */ -#define reg_iop_mpu_r_pc___addr___lsb 0 -#define reg_iop_mpu_r_pc___addr___width 12 -#define reg_iop_mpu_r_pc_offset 132 - -/* Register r_stat, scope iop_mpu, type r */ -#define reg_iop_mpu_r_stat___instr_reg_busy___lsb 0 -#define reg_iop_mpu_r_stat___instr_reg_busy___width 1 -#define reg_iop_mpu_r_stat___instr_reg_busy___bit 0 -#define reg_iop_mpu_r_stat___intr_busy___lsb 1 -#define reg_iop_mpu_r_stat___intr_busy___width 1 -#define reg_iop_mpu_r_stat___intr_busy___bit 1 -#define reg_iop_mpu_r_stat___intr_vect___lsb 2 -#define reg_iop_mpu_r_stat___intr_vect___width 16 -#define reg_iop_mpu_r_stat_offset 136 - -/* Register rw_instr, scope iop_mpu, type rw */ -#define reg_iop_mpu_rw_instr_offset 140 - -/* Register rw_immediate, scope iop_mpu, type rw */ -#define reg_iop_mpu_rw_immediate_offset 144 - -/* Register r_trace, scope iop_mpu, type r */ -#define reg_iop_mpu_r_trace___intr_vect___lsb 0 -#define reg_iop_mpu_r_trace___intr_vect___width 16 -#define reg_iop_mpu_r_trace___pc___lsb 16 -#define reg_iop_mpu_r_trace___pc___width 12 -#define reg_iop_mpu_r_trace___en___lsb 28 -#define reg_iop_mpu_r_trace___en___width 1 -#define reg_iop_mpu_r_trace___en___bit 28 -#define reg_iop_mpu_r_trace___instr_reg_busy___lsb 29 -#define reg_iop_mpu_r_trace___instr_reg_busy___width 1 -#define reg_iop_mpu_r_trace___instr_reg_busy___bit 29 -#define reg_iop_mpu_r_trace___intr_busy___lsb 30 -#define reg_iop_mpu_r_trace___intr_busy___width 1 -#define reg_iop_mpu_r_trace___intr_busy___bit 30 -#define reg_iop_mpu_r_trace_offset 148 - -/* Register r_wr_stat, scope iop_mpu, type r */ -#define reg_iop_mpu_r_wr_stat___r0___lsb 0 -#define reg_iop_mpu_r_wr_stat___r0___width 1 -#define reg_iop_mpu_r_wr_stat___r0___bit 0 -#define reg_iop_mpu_r_wr_stat___r1___lsb 1 -#define reg_iop_mpu_r_wr_stat___r1___width 1 -#define reg_iop_mpu_r_wr_stat___r1___bit 1 -#define reg_iop_mpu_r_wr_stat___r2___lsb 2 -#define reg_iop_mpu_r_wr_stat___r2___width 1 -#define reg_iop_mpu_r_wr_stat___r2___bit 2 -#define reg_iop_mpu_r_wr_stat___r3___lsb 3 -#define reg_iop_mpu_r_wr_stat___r3___width 1 -#define reg_iop_mpu_r_wr_stat___r3___bit 3 -#define reg_iop_mpu_r_wr_stat___r4___lsb 4 -#define reg_iop_mpu_r_wr_stat___r4___width 1 -#define reg_iop_mpu_r_wr_stat___r4___bit 4 -#define reg_iop_mpu_r_wr_stat___r5___lsb 5 -#define reg_iop_mpu_r_wr_stat___r5___width 1 -#define reg_iop_mpu_r_wr_stat___r5___bit 5 -#define reg_iop_mpu_r_wr_stat___r6___lsb 6 -#define reg_iop_mpu_r_wr_stat___r6___width 1 -#define reg_iop_mpu_r_wr_stat___r6___bit 6 -#define reg_iop_mpu_r_wr_stat___r7___lsb 7 -#define reg_iop_mpu_r_wr_stat___r7___width 1 -#define reg_iop_mpu_r_wr_stat___r7___bit 7 -#define reg_iop_mpu_r_wr_stat___r8___lsb 8 -#define reg_iop_mpu_r_wr_stat___r8___width 1 -#define reg_iop_mpu_r_wr_stat___r8___bit 8 -#define reg_iop_mpu_r_wr_stat___r9___lsb 9 -#define reg_iop_mpu_r_wr_stat___r9___width 1 -#define reg_iop_mpu_r_wr_stat___r9___bit 9 -#define reg_iop_mpu_r_wr_stat___r10___lsb 10 -#define reg_iop_mpu_r_wr_stat___r10___width 1 -#define reg_iop_mpu_r_wr_stat___r10___bit 10 -#define reg_iop_mpu_r_wr_stat___r11___lsb 11 -#define reg_iop_mpu_r_wr_stat___r11___width 1 -#define reg_iop_mpu_r_wr_stat___r11___bit 11 -#define reg_iop_mpu_r_wr_stat___r12___lsb 12 -#define reg_iop_mpu_r_wr_stat___r12___width 1 -#define reg_iop_mpu_r_wr_stat___r12___bit 12 -#define reg_iop_mpu_r_wr_stat___r13___lsb 13 -#define reg_iop_mpu_r_wr_stat___r13___width 1 -#define reg_iop_mpu_r_wr_stat___r13___bit 13 -#define reg_iop_mpu_r_wr_stat___r14___lsb 14 -#define reg_iop_mpu_r_wr_stat___r14___width 1 -#define reg_iop_mpu_r_wr_stat___r14___bit 14 -#define reg_iop_mpu_r_wr_stat___r15___lsb 15 -#define reg_iop_mpu_r_wr_stat___r15___width 1 -#define reg_iop_mpu_r_wr_stat___r15___bit 15 -#define reg_iop_mpu_r_wr_stat_offset 152 - -#define STRIDE_iop_mpu_rw_thread 4 -/* Register rw_thread, scope iop_mpu, type rw */ -#define reg_iop_mpu_rw_thread___addr___lsb 0 -#define reg_iop_mpu_rw_thread___addr___width 12 -#define reg_iop_mpu_rw_thread_offset 156 - -#define STRIDE_iop_mpu_rw_intr 4 -/* Register rw_intr, scope iop_mpu, type rw */ -#define reg_iop_mpu_rw_intr___addr___lsb 0 -#define reg_iop_mpu_rw_intr___addr___width 12 -#define reg_iop_mpu_rw_intr_offset 196 - - -/* Constants */ -#define regk_iop_mpu_no 0x00000000 -#define regk_iop_mpu_r_pc_default 0x00000000 -#define regk_iop_mpu_rw_ctrl_default 0x00000000 -#define regk_iop_mpu_rw_intr_size 0x00000010 -#define regk_iop_mpu_rw_r_size 0x00000010 -#define regk_iop_mpu_rw_thread_default 0x00000000 -#define regk_iop_mpu_rw_thread_size 0x00000004 -#define regk_iop_mpu_yes 0x00000001 -#endif /* __iop_mpu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h deleted file mode 100644 index a20b8857b4d0..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h +++ /dev/null @@ -1,44 +0,0 @@ -/* Autogenerated Changes here will be lost! - * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg - */ -#define iop_version 0 -#define iop_fifo_in0_extra 64 -#define iop_fifo_in1_extra 128 -#define iop_fifo_out0_extra 192 -#define iop_fifo_out1_extra 256 -#define iop_trigger_grp0 320 -#define iop_trigger_grp1 384 -#define iop_trigger_grp2 448 -#define iop_trigger_grp3 512 -#define iop_trigger_grp4 576 -#define iop_trigger_grp5 640 -#define iop_trigger_grp6 704 -#define iop_trigger_grp7 768 -#define iop_crc_par0 896 -#define iop_crc_par1 1024 -#define iop_dmc_in0 1152 -#define iop_dmc_in1 1280 -#define iop_dmc_out0 1408 -#define iop_dmc_out1 1536 -#define iop_fifo_in0 1664 -#define iop_fifo_in1 1792 -#define iop_fifo_out0 1920 -#define iop_fifo_out1 2048 -#define iop_scrc_in0 2176 -#define iop_scrc_in1 2304 -#define iop_scrc_out0 2432 -#define iop_scrc_out1 2560 -#define iop_timer_grp0 2688 -#define iop_timer_grp1 2816 -#define iop_timer_grp2 2944 -#define iop_timer_grp3 3072 -#define iop_sap_in 3328 -#define iop_sap_out 3584 -#define iop_spu0 3840 -#define iop_spu1 4096 -#define iop_sw_cfg 4352 -#define iop_sw_cpu 4608 -#define iop_sw_mpu 4864 -#define iop_sw_spu0 5120 -#define iop_sw_spu1 5376 -#define iop_mpu 5632 diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h deleted file mode 100644 index a4a10ff300b3..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h +++ /dev/null @@ -1,182 +0,0 @@ -#ifndef __iop_sap_in_defs_asm_h -#define __iop_sap_in_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_sap_in.r - * id: - * last modfied: Mon Apr 11 16:08:45 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sap_in_defs_asm.h ../../inst/io_proc/rtl/iop_sap_in.r - * id: $Id: iop_sap_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_bus0_sync, scope iop_sap_in, type rw */ -#define reg_iop_sap_in_rw_bus0_sync___byte0_sel___lsb 0 -#define reg_iop_sap_in_rw_bus0_sync___byte0_sel___width 2 -#define reg_iop_sap_in_rw_bus0_sync___byte0_ext_src___lsb 2 -#define reg_iop_sap_in_rw_bus0_sync___byte0_ext_src___width 3 -#define reg_iop_sap_in_rw_bus0_sync___byte0_edge___lsb 5 -#define reg_iop_sap_in_rw_bus0_sync___byte0_edge___width 2 -#define reg_iop_sap_in_rw_bus0_sync___byte0_delay___lsb 7 -#define reg_iop_sap_in_rw_bus0_sync___byte0_delay___width 1 -#define reg_iop_sap_in_rw_bus0_sync___byte0_delay___bit 7 -#define reg_iop_sap_in_rw_bus0_sync___byte1_sel___lsb 8 -#define reg_iop_sap_in_rw_bus0_sync___byte1_sel___width 2 -#define reg_iop_sap_in_rw_bus0_sync___byte1_ext_src___lsb 10 -#define reg_iop_sap_in_rw_bus0_sync___byte1_ext_src___width 3 -#define reg_iop_sap_in_rw_bus0_sync___byte1_edge___lsb 13 -#define reg_iop_sap_in_rw_bus0_sync___byte1_edge___width 2 -#define reg_iop_sap_in_rw_bus0_sync___byte1_delay___lsb 15 -#define reg_iop_sap_in_rw_bus0_sync___byte1_delay___width 1 -#define reg_iop_sap_in_rw_bus0_sync___byte1_delay___bit 15 -#define reg_iop_sap_in_rw_bus0_sync___byte2_sel___lsb 16 -#define reg_iop_sap_in_rw_bus0_sync___byte2_sel___width 2 -#define reg_iop_sap_in_rw_bus0_sync___byte2_ext_src___lsb 18 -#define reg_iop_sap_in_rw_bus0_sync___byte2_ext_src___width 3 -#define reg_iop_sap_in_rw_bus0_sync___byte2_edge___lsb 21 -#define reg_iop_sap_in_rw_bus0_sync___byte2_edge___width 2 -#define reg_iop_sap_in_rw_bus0_sync___byte2_delay___lsb 23 -#define reg_iop_sap_in_rw_bus0_sync___byte2_delay___width 1 -#define reg_iop_sap_in_rw_bus0_sync___byte2_delay___bit 23 -#define reg_iop_sap_in_rw_bus0_sync___byte3_sel___lsb 24 -#define reg_iop_sap_in_rw_bus0_sync___byte3_sel___width 2 -#define reg_iop_sap_in_rw_bus0_sync___byte3_ext_src___lsb 26 -#define reg_iop_sap_in_rw_bus0_sync___byte3_ext_src___width 3 -#define reg_iop_sap_in_rw_bus0_sync___byte3_edge___lsb 29 -#define reg_iop_sap_in_rw_bus0_sync___byte3_edge___width 2 -#define reg_iop_sap_in_rw_bus0_sync___byte3_delay___lsb 31 -#define reg_iop_sap_in_rw_bus0_sync___byte3_delay___width 1 -#define reg_iop_sap_in_rw_bus0_sync___byte3_delay___bit 31 -#define reg_iop_sap_in_rw_bus0_sync_offset 0 - -/* Register rw_bus1_sync, scope iop_sap_in, type rw */ -#define reg_iop_sap_in_rw_bus1_sync___byte0_sel___lsb 0 -#define reg_iop_sap_in_rw_bus1_sync___byte0_sel___width 2 -#define reg_iop_sap_in_rw_bus1_sync___byte0_ext_src___lsb 2 -#define reg_iop_sap_in_rw_bus1_sync___byte0_ext_src___width 3 -#define reg_iop_sap_in_rw_bus1_sync___byte0_edge___lsb 5 -#define reg_iop_sap_in_rw_bus1_sync___byte0_edge___width 2 -#define reg_iop_sap_in_rw_bus1_sync___byte0_delay___lsb 7 -#define reg_iop_sap_in_rw_bus1_sync___byte0_delay___width 1 -#define reg_iop_sap_in_rw_bus1_sync___byte0_delay___bit 7 -#define reg_iop_sap_in_rw_bus1_sync___byte1_sel___lsb 8 -#define reg_iop_sap_in_rw_bus1_sync___byte1_sel___width 2 -#define reg_iop_sap_in_rw_bus1_sync___byte1_ext_src___lsb 10 -#define reg_iop_sap_in_rw_bus1_sync___byte1_ext_src___width 3 -#define reg_iop_sap_in_rw_bus1_sync___byte1_edge___lsb 13 -#define reg_iop_sap_in_rw_bus1_sync___byte1_edge___width 2 -#define reg_iop_sap_in_rw_bus1_sync___byte1_delay___lsb 15 -#define reg_iop_sap_in_rw_bus1_sync___byte1_delay___width 1 -#define reg_iop_sap_in_rw_bus1_sync___byte1_delay___bit 15 -#define reg_iop_sap_in_rw_bus1_sync___byte2_sel___lsb 16 -#define reg_iop_sap_in_rw_bus1_sync___byte2_sel___width 2 -#define reg_iop_sap_in_rw_bus1_sync___byte2_ext_src___lsb 18 -#define reg_iop_sap_in_rw_bus1_sync___byte2_ext_src___width 3 -#define reg_iop_sap_in_rw_bus1_sync___byte2_edge___lsb 21 -#define reg_iop_sap_in_rw_bus1_sync___byte2_edge___width 2 -#define reg_iop_sap_in_rw_bus1_sync___byte2_delay___lsb 23 -#define reg_iop_sap_in_rw_bus1_sync___byte2_delay___width 1 -#define reg_iop_sap_in_rw_bus1_sync___byte2_delay___bit 23 -#define reg_iop_sap_in_rw_bus1_sync___byte3_sel___lsb 24 -#define reg_iop_sap_in_rw_bus1_sync___byte3_sel___width 2 -#define reg_iop_sap_in_rw_bus1_sync___byte3_ext_src___lsb 26 -#define reg_iop_sap_in_rw_bus1_sync___byte3_ext_src___width 3 -#define reg_iop_sap_in_rw_bus1_sync___byte3_edge___lsb 29 -#define reg_iop_sap_in_rw_bus1_sync___byte3_edge___width 2 -#define reg_iop_sap_in_rw_bus1_sync___byte3_delay___lsb 31 -#define reg_iop_sap_in_rw_bus1_sync___byte3_delay___width 1 -#define reg_iop_sap_in_rw_bus1_sync___byte3_delay___bit 31 -#define reg_iop_sap_in_rw_bus1_sync_offset 4 - -#define STRIDE_iop_sap_in_rw_gio 4 -/* Register rw_gio, scope iop_sap_in, type rw */ -#define reg_iop_sap_in_rw_gio___sync_sel___lsb 0 -#define reg_iop_sap_in_rw_gio___sync_sel___width 2 -#define reg_iop_sap_in_rw_gio___sync_ext_src___lsb 2 -#define reg_iop_sap_in_rw_gio___sync_ext_src___width 3 -#define reg_iop_sap_in_rw_gio___sync_edge___lsb 5 -#define reg_iop_sap_in_rw_gio___sync_edge___width 2 -#define reg_iop_sap_in_rw_gio___delay___lsb 7 -#define reg_iop_sap_in_rw_gio___delay___width 1 -#define reg_iop_sap_in_rw_gio___delay___bit 7 -#define reg_iop_sap_in_rw_gio___logic___lsb 8 -#define reg_iop_sap_in_rw_gio___logic___width 2 -#define reg_iop_sap_in_rw_gio_offset 8 - - -/* Constants */ -#define regk_iop_sap_in_and 0x00000002 -#define regk_iop_sap_in_ext_clk200 0x00000003 -#define regk_iop_sap_in_gio1 0x00000000 -#define regk_iop_sap_in_gio13 0x00000005 -#define regk_iop_sap_in_gio18 0x00000003 -#define regk_iop_sap_in_gio19 0x00000004 -#define regk_iop_sap_in_gio21 0x00000006 -#define regk_iop_sap_in_gio23 0x00000005 -#define regk_iop_sap_in_gio29 0x00000007 -#define regk_iop_sap_in_gio5 0x00000004 -#define regk_iop_sap_in_gio6 0x00000001 -#define regk_iop_sap_in_gio7 0x00000002 -#define regk_iop_sap_in_inv 0x00000001 -#define regk_iop_sap_in_neg 0x00000002 -#define regk_iop_sap_in_no 0x00000000 -#define regk_iop_sap_in_no_del_ext_clk200 0x00000001 -#define regk_iop_sap_in_none 0x00000000 -#define regk_iop_sap_in_or 0x00000003 -#define regk_iop_sap_in_pos 0x00000001 -#define regk_iop_sap_in_pos_neg 0x00000003 -#define regk_iop_sap_in_rw_bus0_sync_default 0x02020202 -#define regk_iop_sap_in_rw_bus1_sync_default 0x02020202 -#define regk_iop_sap_in_rw_gio_default 0x00000002 -#define regk_iop_sap_in_rw_gio_size 0x00000020 -#define regk_iop_sap_in_timer_grp0_tmr3 0x00000006 -#define regk_iop_sap_in_timer_grp1_tmr3 0x00000004 -#define regk_iop_sap_in_timer_grp2_tmr3 0x00000005 -#define regk_iop_sap_in_timer_grp3_tmr3 0x00000007 -#define regk_iop_sap_in_tmr_clk200 0x00000000 -#define regk_iop_sap_in_two_clk200 0x00000002 -#define regk_iop_sap_in_yes 0x00000001 -#endif /* __iop_sap_in_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h deleted file mode 100644 index 0ec727f92a25..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h +++ /dev/null @@ -1,346 +0,0 @@ -#ifndef __iop_sap_out_defs_asm_h -#define __iop_sap_out_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_sap_out.r - * id: - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sap_out_defs_asm.h ../../inst/io_proc/rtl/iop_sap_out.r - * id: $Id: iop_sap_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_gen_gated, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_gen_gated___clk0_src___lsb 0 -#define reg_iop_sap_out_rw_gen_gated___clk0_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk0_gate_src___lsb 2 -#define reg_iop_sap_out_rw_gen_gated___clk0_gate_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk0_force_src___lsb 4 -#define reg_iop_sap_out_rw_gen_gated___clk0_force_src___width 3 -#define reg_iop_sap_out_rw_gen_gated___clk1_src___lsb 7 -#define reg_iop_sap_out_rw_gen_gated___clk1_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk1_gate_src___lsb 9 -#define reg_iop_sap_out_rw_gen_gated___clk1_gate_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk1_force_src___lsb 11 -#define reg_iop_sap_out_rw_gen_gated___clk1_force_src___width 3 -#define reg_iop_sap_out_rw_gen_gated___clk2_src___lsb 14 -#define reg_iop_sap_out_rw_gen_gated___clk2_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk2_gate_src___lsb 16 -#define reg_iop_sap_out_rw_gen_gated___clk2_gate_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk2_force_src___lsb 18 -#define reg_iop_sap_out_rw_gen_gated___clk2_force_src___width 3 -#define reg_iop_sap_out_rw_gen_gated___clk3_src___lsb 21 -#define reg_iop_sap_out_rw_gen_gated___clk3_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk3_gate_src___lsb 23 -#define reg_iop_sap_out_rw_gen_gated___clk3_gate_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk3_force_src___lsb 25 -#define reg_iop_sap_out_rw_gen_gated___clk3_force_src___width 3 -#define reg_iop_sap_out_rw_gen_gated_offset 0 - -/* Register rw_bus0, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_bus0___byte0_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_bus0___byte0_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus0___byte0_gated_clk___lsb 3 -#define reg_iop_sap_out_rw_bus0___byte0_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus0___byte0_clk_inv___lsb 5 -#define reg_iop_sap_out_rw_bus0___byte0_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus0___byte0_clk_inv___bit 5 -#define reg_iop_sap_out_rw_bus0___byte1_clk_sel___lsb 6 -#define reg_iop_sap_out_rw_bus0___byte1_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus0___byte1_gated_clk___lsb 9 -#define reg_iop_sap_out_rw_bus0___byte1_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus0___byte1_clk_inv___lsb 11 -#define reg_iop_sap_out_rw_bus0___byte1_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus0___byte1_clk_inv___bit 11 -#define reg_iop_sap_out_rw_bus0___byte2_clk_sel___lsb 12 -#define reg_iop_sap_out_rw_bus0___byte2_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus0___byte2_gated_clk___lsb 15 -#define reg_iop_sap_out_rw_bus0___byte2_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus0___byte2_clk_inv___lsb 17 -#define reg_iop_sap_out_rw_bus0___byte2_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus0___byte2_clk_inv___bit 17 -#define reg_iop_sap_out_rw_bus0___byte3_clk_sel___lsb 18 -#define reg_iop_sap_out_rw_bus0___byte3_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus0___byte3_gated_clk___lsb 21 -#define reg_iop_sap_out_rw_bus0___byte3_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus0___byte3_clk_inv___lsb 23 -#define reg_iop_sap_out_rw_bus0___byte3_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus0___byte3_clk_inv___bit 23 -#define reg_iop_sap_out_rw_bus0_offset 4 - -/* Register rw_bus1, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_bus1___byte0_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_bus1___byte0_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus1___byte0_gated_clk___lsb 3 -#define reg_iop_sap_out_rw_bus1___byte0_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus1___byte0_clk_inv___lsb 5 -#define reg_iop_sap_out_rw_bus1___byte0_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus1___byte0_clk_inv___bit 5 -#define reg_iop_sap_out_rw_bus1___byte1_clk_sel___lsb 6 -#define reg_iop_sap_out_rw_bus1___byte1_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus1___byte1_gated_clk___lsb 9 -#define reg_iop_sap_out_rw_bus1___byte1_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus1___byte1_clk_inv___lsb 11 -#define reg_iop_sap_out_rw_bus1___byte1_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus1___byte1_clk_inv___bit 11 -#define reg_iop_sap_out_rw_bus1___byte2_clk_sel___lsb 12 -#define reg_iop_sap_out_rw_bus1___byte2_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus1___byte2_gated_clk___lsb 15 -#define reg_iop_sap_out_rw_bus1___byte2_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus1___byte2_clk_inv___lsb 17 -#define reg_iop_sap_out_rw_bus1___byte2_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus1___byte2_clk_inv___bit 17 -#define reg_iop_sap_out_rw_bus1___byte3_clk_sel___lsb 18 -#define reg_iop_sap_out_rw_bus1___byte3_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus1___byte3_gated_clk___lsb 21 -#define reg_iop_sap_out_rw_bus1___byte3_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus1___byte3_clk_inv___lsb 23 -#define reg_iop_sap_out_rw_bus1___byte3_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus1___byte3_clk_inv___bit 23 -#define reg_iop_sap_out_rw_bus1_offset 8 - -/* Register rw_bus0_lo_oe, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_ext___lsb 3 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_ext___width 3 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_gated_clk___lsb 6 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_inv___lsb 8 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_clk_inv___bit 8 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_logic___lsb 9 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte0_logic___width 2 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_sel___lsb 11 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_ext___lsb 14 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_ext___width 3 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_gated_clk___lsb 17 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_inv___lsb 19 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_clk_inv___bit 19 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_logic___lsb 20 -#define reg_iop_sap_out_rw_bus0_lo_oe___byte1_logic___width 2 -#define reg_iop_sap_out_rw_bus0_lo_oe_offset 12 - -/* Register rw_bus0_hi_oe, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_ext___lsb 3 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_ext___width 3 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_gated_clk___lsb 6 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_inv___lsb 8 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_clk_inv___bit 8 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_logic___lsb 9 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte2_logic___width 2 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_sel___lsb 11 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_ext___lsb 14 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_ext___width 3 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_gated_clk___lsb 17 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_inv___lsb 19 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_clk_inv___bit 19 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_logic___lsb 20 -#define reg_iop_sap_out_rw_bus0_hi_oe___byte3_logic___width 2 -#define reg_iop_sap_out_rw_bus0_hi_oe_offset 16 - -/* Register rw_bus1_lo_oe, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_ext___lsb 3 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_ext___width 3 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_gated_clk___lsb 6 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_inv___lsb 8 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_clk_inv___bit 8 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_logic___lsb 9 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte0_logic___width 2 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_sel___lsb 11 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_ext___lsb 14 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_ext___width 3 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_gated_clk___lsb 17 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_inv___lsb 19 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_clk_inv___bit 19 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_logic___lsb 20 -#define reg_iop_sap_out_rw_bus1_lo_oe___byte1_logic___width 2 -#define reg_iop_sap_out_rw_bus1_lo_oe_offset 20 - -/* Register rw_bus1_hi_oe, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_ext___lsb 3 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_ext___width 3 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_gated_clk___lsb 6 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_inv___lsb 8 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_clk_inv___bit 8 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_logic___lsb 9 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte2_logic___width 2 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_sel___lsb 11 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_sel___width 3 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_ext___lsb 14 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_ext___width 3 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_gated_clk___lsb 17 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_gated_clk___width 2 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_inv___lsb 19 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_clk_inv___bit 19 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_logic___lsb 20 -#define reg_iop_sap_out_rw_bus1_hi_oe___byte3_logic___width 2 -#define reg_iop_sap_out_rw_bus1_hi_oe_offset 24 - -#define STRIDE_iop_sap_out_rw_gio 4 -/* Register rw_gio, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_gio___out_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_gio___out_clk_sel___width 3 -#define reg_iop_sap_out_rw_gio___out_clk_ext___lsb 3 -#define reg_iop_sap_out_rw_gio___out_clk_ext___width 4 -#define reg_iop_sap_out_rw_gio___out_gated_clk___lsb 7 -#define reg_iop_sap_out_rw_gio___out_gated_clk___width 2 -#define reg_iop_sap_out_rw_gio___out_clk_inv___lsb 9 -#define reg_iop_sap_out_rw_gio___out_clk_inv___width 1 -#define reg_iop_sap_out_rw_gio___out_clk_inv___bit 9 -#define reg_iop_sap_out_rw_gio___out_logic___lsb 10 -#define reg_iop_sap_out_rw_gio___out_logic___width 1 -#define reg_iop_sap_out_rw_gio___out_logic___bit 10 -#define reg_iop_sap_out_rw_gio___oe_clk_sel___lsb 11 -#define reg_iop_sap_out_rw_gio___oe_clk_sel___width 3 -#define reg_iop_sap_out_rw_gio___oe_clk_ext___lsb 14 -#define reg_iop_sap_out_rw_gio___oe_clk_ext___width 3 -#define reg_iop_sap_out_rw_gio___oe_gated_clk___lsb 17 -#define reg_iop_sap_out_rw_gio___oe_gated_clk___width 2 -#define reg_iop_sap_out_rw_gio___oe_clk_inv___lsb 19 -#define reg_iop_sap_out_rw_gio___oe_clk_inv___width 1 -#define reg_iop_sap_out_rw_gio___oe_clk_inv___bit 19 -#define reg_iop_sap_out_rw_gio___oe_logic___lsb 20 -#define reg_iop_sap_out_rw_gio___oe_logic___width 2 -#define reg_iop_sap_out_rw_gio_offset 28 - - -/* Constants */ -#define regk_iop_sap_out_and 0x00000002 -#define regk_iop_sap_out_clk0 0x00000000 -#define regk_iop_sap_out_clk1 0x00000001 -#define regk_iop_sap_out_clk12 0x00000002 -#define regk_iop_sap_out_clk2 0x00000002 -#define regk_iop_sap_out_clk200 0x00000001 -#define regk_iop_sap_out_clk3 0x00000003 -#define regk_iop_sap_out_ext 0x00000003 -#define regk_iop_sap_out_gated 0x00000004 -#define regk_iop_sap_out_gio1 0x00000000 -#define regk_iop_sap_out_gio13 0x00000002 -#define regk_iop_sap_out_gio13_clk 0x0000000c -#define regk_iop_sap_out_gio15 0x00000001 -#define regk_iop_sap_out_gio18 0x00000003 -#define regk_iop_sap_out_gio18_clk 0x0000000d -#define regk_iop_sap_out_gio1_clk 0x00000008 -#define regk_iop_sap_out_gio21_clk 0x0000000e -#define regk_iop_sap_out_gio23 0x00000002 -#define regk_iop_sap_out_gio29_clk 0x0000000f -#define regk_iop_sap_out_gio31 0x00000003 -#define regk_iop_sap_out_gio5 0x00000001 -#define regk_iop_sap_out_gio5_clk 0x00000009 -#define regk_iop_sap_out_gio6_clk 0x0000000a -#define regk_iop_sap_out_gio7 0x00000000 -#define regk_iop_sap_out_gio7_clk 0x0000000b -#define regk_iop_sap_out_gio_in13 0x00000001 -#define regk_iop_sap_out_gio_in21 0x00000002 -#define regk_iop_sap_out_gio_in29 0x00000003 -#define regk_iop_sap_out_gio_in5 0x00000000 -#define regk_iop_sap_out_inv 0x00000001 -#define regk_iop_sap_out_nand 0x00000003 -#define regk_iop_sap_out_no 0x00000000 -#define regk_iop_sap_out_none 0x00000000 -#define regk_iop_sap_out_rw_bus0_default 0x00000000 -#define regk_iop_sap_out_rw_bus0_hi_oe_default 0x00000000 -#define regk_iop_sap_out_rw_bus0_lo_oe_default 0x00000000 -#define regk_iop_sap_out_rw_bus1_default 0x00000000 -#define regk_iop_sap_out_rw_bus1_hi_oe_default 0x00000000 -#define regk_iop_sap_out_rw_bus1_lo_oe_default 0x00000000 -#define regk_iop_sap_out_rw_gen_gated_default 0x00000000 -#define regk_iop_sap_out_rw_gio_default 0x00000000 -#define regk_iop_sap_out_rw_gio_size 0x00000020 -#define regk_iop_sap_out_spu0_gio0 0x00000002 -#define regk_iop_sap_out_spu0_gio1 0x00000003 -#define regk_iop_sap_out_spu0_gio12 0x00000004 -#define regk_iop_sap_out_spu0_gio13 0x00000004 -#define regk_iop_sap_out_spu0_gio14 0x00000004 -#define regk_iop_sap_out_spu0_gio15 0x00000004 -#define regk_iop_sap_out_spu0_gio2 0x00000002 -#define regk_iop_sap_out_spu0_gio3 0x00000003 -#define regk_iop_sap_out_spu0_gio4 0x00000002 -#define regk_iop_sap_out_spu0_gio5 0x00000003 -#define regk_iop_sap_out_spu0_gio6 0x00000002 -#define regk_iop_sap_out_spu0_gio7 0x00000003 -#define regk_iop_sap_out_spu1_gio0 0x00000005 -#define regk_iop_sap_out_spu1_gio1 0x00000006 -#define regk_iop_sap_out_spu1_gio12 0x00000007 -#define regk_iop_sap_out_spu1_gio13 0x00000007 -#define regk_iop_sap_out_spu1_gio14 0x00000007 -#define regk_iop_sap_out_spu1_gio15 0x00000007 -#define regk_iop_sap_out_spu1_gio2 0x00000005 -#define regk_iop_sap_out_spu1_gio3 0x00000006 -#define regk_iop_sap_out_spu1_gio4 0x00000005 -#define regk_iop_sap_out_spu1_gio5 0x00000006 -#define regk_iop_sap_out_spu1_gio6 0x00000005 -#define regk_iop_sap_out_spu1_gio7 0x00000006 -#define regk_iop_sap_out_timer_grp0_tmr2 0x00000004 -#define regk_iop_sap_out_timer_grp1_tmr2 0x00000005 -#define regk_iop_sap_out_timer_grp2_tmr2 0x00000006 -#define regk_iop_sap_out_timer_grp3_tmr2 0x00000007 -#define regk_iop_sap_out_tmr 0x00000005 -#define regk_iop_sap_out_yes 0x00000001 -#endif /* __iop_sap_out_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h deleted file mode 100644 index 2cf5721597fc..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef __iop_scrc_in_defs_asm_h -#define __iop_scrc_in_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_scrc_in.r - * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_scrc_in_defs_asm.h ../../inst/io_proc/rtl/iop_scrc_in.r - * id: $Id: iop_scrc_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope iop_scrc_in, type rw */ -#define reg_iop_scrc_in_rw_cfg___trig___lsb 0 -#define reg_iop_scrc_in_rw_cfg___trig___width 2 -#define reg_iop_scrc_in_rw_cfg_offset 0 - -/* Register rw_ctrl, scope iop_scrc_in, type rw */ -#define reg_iop_scrc_in_rw_ctrl___dif_in_en___lsb 0 -#define reg_iop_scrc_in_rw_ctrl___dif_in_en___width 1 -#define reg_iop_scrc_in_rw_ctrl___dif_in_en___bit 0 -#define reg_iop_scrc_in_rw_ctrl_offset 4 - -/* Register r_stat, scope iop_scrc_in, type r */ -#define reg_iop_scrc_in_r_stat___err___lsb 0 -#define reg_iop_scrc_in_r_stat___err___width 1 -#define reg_iop_scrc_in_r_stat___err___bit 0 -#define reg_iop_scrc_in_r_stat_offset 8 - -/* Register rw_init_crc, scope iop_scrc_in, type rw */ -#define reg_iop_scrc_in_rw_init_crc_offset 12 - -/* Register rs_computed_crc, scope iop_scrc_in, type rs */ -#define reg_iop_scrc_in_rs_computed_crc_offset 16 - -/* Register r_computed_crc, scope iop_scrc_in, type r */ -#define reg_iop_scrc_in_r_computed_crc_offset 20 - -/* Register rw_crc, scope iop_scrc_in, type rw */ -#define reg_iop_scrc_in_rw_crc_offset 24 - -/* Register rw_correct_crc, scope iop_scrc_in, type rw */ -#define reg_iop_scrc_in_rw_correct_crc_offset 28 - -/* Register rw_wr1bit, scope iop_scrc_in, type rw */ -#define reg_iop_scrc_in_rw_wr1bit___data___lsb 0 -#define reg_iop_scrc_in_rw_wr1bit___data___width 2 -#define reg_iop_scrc_in_rw_wr1bit___last___lsb 2 -#define reg_iop_scrc_in_rw_wr1bit___last___width 2 -#define reg_iop_scrc_in_rw_wr1bit_offset 32 - - -/* Constants */ -#define regk_iop_scrc_in_dif_in 0x00000002 -#define regk_iop_scrc_in_hi 0x00000000 -#define regk_iop_scrc_in_neg 0x00000002 -#define regk_iop_scrc_in_no 0x00000000 -#define regk_iop_scrc_in_pos 0x00000001 -#define regk_iop_scrc_in_pos_neg 0x00000003 -#define regk_iop_scrc_in_r_computed_crc_default 0x00000000 -#define regk_iop_scrc_in_rs_computed_crc_default 0x00000000 -#define regk_iop_scrc_in_rw_cfg_default 0x00000000 -#define regk_iop_scrc_in_rw_ctrl_default 0x00000000 -#define regk_iop_scrc_in_rw_init_crc_default 0x00000000 -#define regk_iop_scrc_in_set0 0x00000000 -#define regk_iop_scrc_in_set1 0x00000001 -#define regk_iop_scrc_in_yes 0x00000001 -#endif /* __iop_scrc_in_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h deleted file mode 100644 index 640a25725f20..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h +++ /dev/null @@ -1,105 +0,0 @@ -#ifndef __iop_scrc_out_defs_asm_h -#define __iop_scrc_out_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_scrc_out.r - * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_scrc_out_defs_asm.h ../../inst/io_proc/rtl/iop_scrc_out.r - * id: $Id: iop_scrc_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope iop_scrc_out, type rw */ -#define reg_iop_scrc_out_rw_cfg___trig___lsb 0 -#define reg_iop_scrc_out_rw_cfg___trig___width 2 -#define reg_iop_scrc_out_rw_cfg___inv_crc___lsb 2 -#define reg_iop_scrc_out_rw_cfg___inv_crc___width 1 -#define reg_iop_scrc_out_rw_cfg___inv_crc___bit 2 -#define reg_iop_scrc_out_rw_cfg_offset 0 - -/* Register rw_ctrl, scope iop_scrc_out, type rw */ -#define reg_iop_scrc_out_rw_ctrl___strb_src___lsb 0 -#define reg_iop_scrc_out_rw_ctrl___strb_src___width 1 -#define reg_iop_scrc_out_rw_ctrl___strb_src___bit 0 -#define reg_iop_scrc_out_rw_ctrl___out_src___lsb 1 -#define reg_iop_scrc_out_rw_ctrl___out_src___width 1 -#define reg_iop_scrc_out_rw_ctrl___out_src___bit 1 -#define reg_iop_scrc_out_rw_ctrl_offset 4 - -/* Register rw_init_crc, scope iop_scrc_out, type rw */ -#define reg_iop_scrc_out_rw_init_crc_offset 8 - -/* Register rw_crc, scope iop_scrc_out, type rw */ -#define reg_iop_scrc_out_rw_crc_offset 12 - -/* Register rw_data, scope iop_scrc_out, type rw */ -#define reg_iop_scrc_out_rw_data___val___lsb 0 -#define reg_iop_scrc_out_rw_data___val___width 1 -#define reg_iop_scrc_out_rw_data___val___bit 0 -#define reg_iop_scrc_out_rw_data_offset 16 - -/* Register r_computed_crc, scope iop_scrc_out, type r */ -#define reg_iop_scrc_out_r_computed_crc_offset 20 - - -/* Constants */ -#define regk_iop_scrc_out_crc 0x00000001 -#define regk_iop_scrc_out_data 0x00000000 -#define regk_iop_scrc_out_dif 0x00000001 -#define regk_iop_scrc_out_hi 0x00000000 -#define regk_iop_scrc_out_neg 0x00000002 -#define regk_iop_scrc_out_no 0x00000000 -#define regk_iop_scrc_out_pos 0x00000001 -#define regk_iop_scrc_out_pos_neg 0x00000003 -#define regk_iop_scrc_out_reg 0x00000000 -#define regk_iop_scrc_out_rw_cfg_default 0x00000000 -#define regk_iop_scrc_out_rw_crc_default 0x00000000 -#define regk_iop_scrc_out_rw_ctrl_default 0x00000000 -#define regk_iop_scrc_out_rw_data_default 0x00000000 -#define regk_iop_scrc_out_rw_init_crc_default 0x00000000 -#define regk_iop_scrc_out_yes 0x00000001 -#endif /* __iop_scrc_out_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h deleted file mode 100644 index bb402c1aa761..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h +++ /dev/null @@ -1,573 +0,0 @@ -#ifndef __iop_spu_defs_asm_h -#define __iop_spu_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_spu.r - * id: - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_spu_defs_asm.h ../../inst/io_proc/rtl/iop_spu.r - * id: $Id: iop_spu_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -#define STRIDE_iop_spu_rw_r 4 -/* Register rw_r, scope iop_spu, type rw */ -#define reg_iop_spu_rw_r_offset 0 - -/* Register rw_seq_pc, scope iop_spu, type rw */ -#define reg_iop_spu_rw_seq_pc___addr___lsb 0 -#define reg_iop_spu_rw_seq_pc___addr___width 12 -#define reg_iop_spu_rw_seq_pc_offset 64 - -/* Register rw_fsm_pc, scope iop_spu, type rw */ -#define reg_iop_spu_rw_fsm_pc___addr___lsb 0 -#define reg_iop_spu_rw_fsm_pc___addr___width 12 -#define reg_iop_spu_rw_fsm_pc_offset 68 - -/* Register rw_ctrl, scope iop_spu, type rw */ -#define reg_iop_spu_rw_ctrl___fsm___lsb 0 -#define reg_iop_spu_rw_ctrl___fsm___width 1 -#define reg_iop_spu_rw_ctrl___fsm___bit 0 -#define reg_iop_spu_rw_ctrl___en___lsb 1 -#define reg_iop_spu_rw_ctrl___en___width 1 -#define reg_iop_spu_rw_ctrl___en___bit 1 -#define reg_iop_spu_rw_ctrl_offset 72 - -/* Register rw_fsm_inputs3_0, scope iop_spu, type rw */ -#define reg_iop_spu_rw_fsm_inputs3_0___val0___lsb 0 -#define reg_iop_spu_rw_fsm_inputs3_0___val0___width 5 -#define reg_iop_spu_rw_fsm_inputs3_0___src0___lsb 5 -#define reg_iop_spu_rw_fsm_inputs3_0___src0___width 3 -#define reg_iop_spu_rw_fsm_inputs3_0___val1___lsb 8 -#define reg_iop_spu_rw_fsm_inputs3_0___val1___width 5 -#define reg_iop_spu_rw_fsm_inputs3_0___src1___lsb 13 -#define reg_iop_spu_rw_fsm_inputs3_0___src1___width 3 -#define reg_iop_spu_rw_fsm_inputs3_0___val2___lsb 16 -#define reg_iop_spu_rw_fsm_inputs3_0___val2___width 5 -#define reg_iop_spu_rw_fsm_inputs3_0___src2___lsb 21 -#define reg_iop_spu_rw_fsm_inputs3_0___src2___width 3 -#define reg_iop_spu_rw_fsm_inputs3_0___val3___lsb 24 -#define reg_iop_spu_rw_fsm_inputs3_0___val3___width 5 -#define reg_iop_spu_rw_fsm_inputs3_0___src3___lsb 29 -#define reg_iop_spu_rw_fsm_inputs3_0___src3___width 3 -#define reg_iop_spu_rw_fsm_inputs3_0_offset 76 - -/* Register rw_fsm_inputs7_4, scope iop_spu, type rw */ -#define reg_iop_spu_rw_fsm_inputs7_4___val4___lsb 0 -#define reg_iop_spu_rw_fsm_inputs7_4___val4___width 5 -#define reg_iop_spu_rw_fsm_inputs7_4___src4___lsb 5 -#define reg_iop_spu_rw_fsm_inputs7_4___src4___width 3 -#define reg_iop_spu_rw_fsm_inputs7_4___val5___lsb 8 -#define reg_iop_spu_rw_fsm_inputs7_4___val5___width 5 -#define reg_iop_spu_rw_fsm_inputs7_4___src5___lsb 13 -#define reg_iop_spu_rw_fsm_inputs7_4___src5___width 3 -#define reg_iop_spu_rw_fsm_inputs7_4___val6___lsb 16 -#define reg_iop_spu_rw_fsm_inputs7_4___val6___width 5 -#define reg_iop_spu_rw_fsm_inputs7_4___src6___lsb 21 -#define reg_iop_spu_rw_fsm_inputs7_4___src6___width 3 -#define reg_iop_spu_rw_fsm_inputs7_4___val7___lsb 24 -#define reg_iop_spu_rw_fsm_inputs7_4___val7___width 5 -#define reg_iop_spu_rw_fsm_inputs7_4___src7___lsb 29 -#define reg_iop_spu_rw_fsm_inputs7_4___src7___width 3 -#define reg_iop_spu_rw_fsm_inputs7_4_offset 80 - -/* Register rw_gio_out, scope iop_spu, type rw */ -#define reg_iop_spu_rw_gio_out_offset 84 - -/* Register rw_bus0_out, scope iop_spu, type rw */ -#define reg_iop_spu_rw_bus0_out_offset 88 - -/* Register rw_bus1_out, scope iop_spu, type rw */ -#define reg_iop_spu_rw_bus1_out_offset 92 - -/* Register r_gio_in, scope iop_spu, type r */ -#define reg_iop_spu_r_gio_in_offset 96 - -/* Register r_bus0_in, scope iop_spu, type r */ -#define reg_iop_spu_r_bus0_in_offset 100 - -/* Register r_bus1_in, scope iop_spu, type r */ -#define reg_iop_spu_r_bus1_in_offset 104 - -/* Register rw_gio_out_set, scope iop_spu, type rw */ -#define reg_iop_spu_rw_gio_out_set_offset 108 - -/* Register rw_gio_out_clr, scope iop_spu, type rw */ -#define reg_iop_spu_rw_gio_out_clr_offset 112 - -/* Register rs_wr_stat, scope iop_spu, type rs */ -#define reg_iop_spu_rs_wr_stat___r0___lsb 0 -#define reg_iop_spu_rs_wr_stat___r0___width 1 -#define reg_iop_spu_rs_wr_stat___r0___bit 0 -#define reg_iop_spu_rs_wr_stat___r1___lsb 1 -#define reg_iop_spu_rs_wr_stat___r1___width 1 -#define reg_iop_spu_rs_wr_stat___r1___bit 1 -#define reg_iop_spu_rs_wr_stat___r2___lsb 2 -#define reg_iop_spu_rs_wr_stat___r2___width 1 -#define reg_iop_spu_rs_wr_stat___r2___bit 2 -#define reg_iop_spu_rs_wr_stat___r3___lsb 3 -#define reg_iop_spu_rs_wr_stat___r3___width 1 -#define reg_iop_spu_rs_wr_stat___r3___bit 3 -#define reg_iop_spu_rs_wr_stat___r4___lsb 4 -#define reg_iop_spu_rs_wr_stat___r4___width 1 -#define reg_iop_spu_rs_wr_stat___r4___bit 4 -#define reg_iop_spu_rs_wr_stat___r5___lsb 5 -#define reg_iop_spu_rs_wr_stat___r5___width 1 -#define reg_iop_spu_rs_wr_stat___r5___bit 5 -#define reg_iop_spu_rs_wr_stat___r6___lsb 6 -#define reg_iop_spu_rs_wr_stat___r6___width 1 -#define reg_iop_spu_rs_wr_stat___r6___bit 6 -#define reg_iop_spu_rs_wr_stat___r7___lsb 7 -#define reg_iop_spu_rs_wr_stat___r7___width 1 -#define reg_iop_spu_rs_wr_stat___r7___bit 7 -#define reg_iop_spu_rs_wr_stat___r8___lsb 8 -#define reg_iop_spu_rs_wr_stat___r8___width 1 -#define reg_iop_spu_rs_wr_stat___r8___bit 8 -#define reg_iop_spu_rs_wr_stat___r9___lsb 9 -#define reg_iop_spu_rs_wr_stat___r9___width 1 -#define reg_iop_spu_rs_wr_stat___r9___bit 9 -#define reg_iop_spu_rs_wr_stat___r10___lsb 10 -#define reg_iop_spu_rs_wr_stat___r10___width 1 -#define reg_iop_spu_rs_wr_stat___r10___bit 10 -#define reg_iop_spu_rs_wr_stat___r11___lsb 11 -#define reg_iop_spu_rs_wr_stat___r11___width 1 -#define reg_iop_spu_rs_wr_stat___r11___bit 11 -#define reg_iop_spu_rs_wr_stat___r12___lsb 12 -#define reg_iop_spu_rs_wr_stat___r12___width 1 -#define reg_iop_spu_rs_wr_stat___r12___bit 12 -#define reg_iop_spu_rs_wr_stat___r13___lsb 13 -#define reg_iop_spu_rs_wr_stat___r13___width 1 -#define reg_iop_spu_rs_wr_stat___r13___bit 13 -#define reg_iop_spu_rs_wr_stat___r14___lsb 14 -#define reg_iop_spu_rs_wr_stat___r14___width 1 -#define reg_iop_spu_rs_wr_stat___r14___bit 14 -#define reg_iop_spu_rs_wr_stat___r15___lsb 15 -#define reg_iop_spu_rs_wr_stat___r15___width 1 -#define reg_iop_spu_rs_wr_stat___r15___bit 15 -#define reg_iop_spu_rs_wr_stat_offset 116 - -/* Register r_wr_stat, scope iop_spu, type r */ -#define reg_iop_spu_r_wr_stat___r0___lsb 0 -#define reg_iop_spu_r_wr_stat___r0___width 1 -#define reg_iop_spu_r_wr_stat___r0___bit 0 -#define reg_iop_spu_r_wr_stat___r1___lsb 1 -#define reg_iop_spu_r_wr_stat___r1___width 1 -#define reg_iop_spu_r_wr_stat___r1___bit 1 -#define reg_iop_spu_r_wr_stat___r2___lsb 2 -#define reg_iop_spu_r_wr_stat___r2___width 1 -#define reg_iop_spu_r_wr_stat___r2___bit 2 -#define reg_iop_spu_r_wr_stat___r3___lsb 3 -#define reg_iop_spu_r_wr_stat___r3___width 1 -#define reg_iop_spu_r_wr_stat___r3___bit 3 -#define reg_iop_spu_r_wr_stat___r4___lsb 4 -#define reg_iop_spu_r_wr_stat___r4___width 1 -#define reg_iop_spu_r_wr_stat___r4___bit 4 -#define reg_iop_spu_r_wr_stat___r5___lsb 5 -#define reg_iop_spu_r_wr_stat___r5___width 1 -#define reg_iop_spu_r_wr_stat___r5___bit 5 -#define reg_iop_spu_r_wr_stat___r6___lsb 6 -#define reg_iop_spu_r_wr_stat___r6___width 1 -#define reg_iop_spu_r_wr_stat___r6___bit 6 -#define reg_iop_spu_r_wr_stat___r7___lsb 7 -#define reg_iop_spu_r_wr_stat___r7___width 1 -#define reg_iop_spu_r_wr_stat___r7___bit 7 -#define reg_iop_spu_r_wr_stat___r8___lsb 8 -#define reg_iop_spu_r_wr_stat___r8___width 1 -#define reg_iop_spu_r_wr_stat___r8___bit 8 -#define reg_iop_spu_r_wr_stat___r9___lsb 9 -#define reg_iop_spu_r_wr_stat___r9___width 1 -#define reg_iop_spu_r_wr_stat___r9___bit 9 -#define reg_iop_spu_r_wr_stat___r10___lsb 10 -#define reg_iop_spu_r_wr_stat___r10___width 1 -#define reg_iop_spu_r_wr_stat___r10___bit 10 -#define reg_iop_spu_r_wr_stat___r11___lsb 11 -#define reg_iop_spu_r_wr_stat___r11___width 1 -#define reg_iop_spu_r_wr_stat___r11___bit 11 -#define reg_iop_spu_r_wr_stat___r12___lsb 12 -#define reg_iop_spu_r_wr_stat___r12___width 1 -#define reg_iop_spu_r_wr_stat___r12___bit 12 -#define reg_iop_spu_r_wr_stat___r13___lsb 13 -#define reg_iop_spu_r_wr_stat___r13___width 1 -#define reg_iop_spu_r_wr_stat___r13___bit 13 -#define reg_iop_spu_r_wr_stat___r14___lsb 14 -#define reg_iop_spu_r_wr_stat___r14___width 1 -#define reg_iop_spu_r_wr_stat___r14___bit 14 -#define reg_iop_spu_r_wr_stat___r15___lsb 15 -#define reg_iop_spu_r_wr_stat___r15___width 1 -#define reg_iop_spu_r_wr_stat___r15___bit 15 -#define reg_iop_spu_r_wr_stat_offset 120 - -/* Register r_reg_indexed_by_bus0_in, scope iop_spu, type r */ -#define reg_iop_spu_r_reg_indexed_by_bus0_in_offset 124 - -/* Register r_stat_in, scope iop_spu, type r */ -#define reg_iop_spu_r_stat_in___timer_grp_lo___lsb 0 -#define reg_iop_spu_r_stat_in___timer_grp_lo___width 4 -#define reg_iop_spu_r_stat_in___fifo_out_last___lsb 4 -#define reg_iop_spu_r_stat_in___fifo_out_last___width 1 -#define reg_iop_spu_r_stat_in___fifo_out_last___bit 4 -#define reg_iop_spu_r_stat_in___fifo_out_rdy___lsb 5 -#define reg_iop_spu_r_stat_in___fifo_out_rdy___width 1 -#define reg_iop_spu_r_stat_in___fifo_out_rdy___bit 5 -#define reg_iop_spu_r_stat_in___fifo_out_all___lsb 6 -#define reg_iop_spu_r_stat_in___fifo_out_all___width 1 -#define reg_iop_spu_r_stat_in___fifo_out_all___bit 6 -#define reg_iop_spu_r_stat_in___fifo_in_rdy___lsb 7 -#define reg_iop_spu_r_stat_in___fifo_in_rdy___width 1 -#define reg_iop_spu_r_stat_in___fifo_in_rdy___bit 7 -#define reg_iop_spu_r_stat_in___dmc_out_all___lsb 8 -#define reg_iop_spu_r_stat_in___dmc_out_all___width 1 -#define reg_iop_spu_r_stat_in___dmc_out_all___bit 8 -#define reg_iop_spu_r_stat_in___dmc_out_dth___lsb 9 -#define reg_iop_spu_r_stat_in___dmc_out_dth___width 1 -#define reg_iop_spu_r_stat_in___dmc_out_dth___bit 9 -#define reg_iop_spu_r_stat_in___dmc_out_eop___lsb 10 -#define reg_iop_spu_r_stat_in___dmc_out_eop___width 1 -#define reg_iop_spu_r_stat_in___dmc_out_eop___bit 10 -#define reg_iop_spu_r_stat_in___dmc_out_dv___lsb 11 -#define reg_iop_spu_r_stat_in___dmc_out_dv___width 1 -#define reg_iop_spu_r_stat_in___dmc_out_dv___bit 11 -#define reg_iop_spu_r_stat_in___dmc_out_last___lsb 12 -#define reg_iop_spu_r_stat_in___dmc_out_last___width 1 -#define reg_iop_spu_r_stat_in___dmc_out_last___bit 12 -#define reg_iop_spu_r_stat_in___dmc_out_cmd_rq___lsb 13 -#define reg_iop_spu_r_stat_in___dmc_out_cmd_rq___width 1 -#define reg_iop_spu_r_stat_in___dmc_out_cmd_rq___bit 13 -#define reg_iop_spu_r_stat_in___dmc_out_cmd_rdy___lsb 14 -#define reg_iop_spu_r_stat_in___dmc_out_cmd_rdy___width 1 -#define reg_iop_spu_r_stat_in___dmc_out_cmd_rdy___bit 14 -#define reg_iop_spu_r_stat_in___pcrc_correct___lsb 15 -#define reg_iop_spu_r_stat_in___pcrc_correct___width 1 -#define reg_iop_spu_r_stat_in___pcrc_correct___bit 15 -#define reg_iop_spu_r_stat_in___timer_grp_hi___lsb 16 -#define reg_iop_spu_r_stat_in___timer_grp_hi___width 4 -#define reg_iop_spu_r_stat_in___dmc_in_sth___lsb 20 -#define reg_iop_spu_r_stat_in___dmc_in_sth___width 1 -#define reg_iop_spu_r_stat_in___dmc_in_sth___bit 20 -#define reg_iop_spu_r_stat_in___dmc_in_full___lsb 21 -#define reg_iop_spu_r_stat_in___dmc_in_full___width 1 -#define reg_iop_spu_r_stat_in___dmc_in_full___bit 21 -#define reg_iop_spu_r_stat_in___dmc_in_cmd_rdy___lsb 22 -#define reg_iop_spu_r_stat_in___dmc_in_cmd_rdy___width 1 -#define reg_iop_spu_r_stat_in___dmc_in_cmd_rdy___bit 22 -#define reg_iop_spu_r_stat_in___spu_gio_out___lsb 23 -#define reg_iop_spu_r_stat_in___spu_gio_out___width 4 -#define reg_iop_spu_r_stat_in___sync_clk12___lsb 27 -#define reg_iop_spu_r_stat_in___sync_clk12___width 1 -#define reg_iop_spu_r_stat_in___sync_clk12___bit 27 -#define reg_iop_spu_r_stat_in___scrc_out_data___lsb 28 -#define reg_iop_spu_r_stat_in___scrc_out_data___width 1 -#define reg_iop_spu_r_stat_in___scrc_out_data___bit 28 -#define reg_iop_spu_r_stat_in___scrc_in_err___lsb 29 -#define reg_iop_spu_r_stat_in___scrc_in_err___width 1 -#define reg_iop_spu_r_stat_in___scrc_in_err___bit 29 -#define reg_iop_spu_r_stat_in___mc_busy___lsb 30 -#define reg_iop_spu_r_stat_in___mc_busy___width 1 -#define reg_iop_spu_r_stat_in___mc_busy___bit 30 -#define reg_iop_spu_r_stat_in___mc_owned___lsb 31 -#define reg_iop_spu_r_stat_in___mc_owned___width 1 -#define reg_iop_spu_r_stat_in___mc_owned___bit 31 -#define reg_iop_spu_r_stat_in_offset 128 - -/* Register r_trigger_in, scope iop_spu, type r */ -#define reg_iop_spu_r_trigger_in_offset 132 - -/* Register r_special_stat, scope iop_spu, type r */ -#define reg_iop_spu_r_special_stat___c_flag___lsb 0 -#define reg_iop_spu_r_special_stat___c_flag___width 1 -#define reg_iop_spu_r_special_stat___c_flag___bit 0 -#define reg_iop_spu_r_special_stat___v_flag___lsb 1 -#define reg_iop_spu_r_special_stat___v_flag___width 1 -#define reg_iop_spu_r_special_stat___v_flag___bit 1 -#define reg_iop_spu_r_special_stat___z_flag___lsb 2 -#define reg_iop_spu_r_special_stat___z_flag___width 1 -#define reg_iop_spu_r_special_stat___z_flag___bit 2 -#define reg_iop_spu_r_special_stat___n_flag___lsb 3 -#define reg_iop_spu_r_special_stat___n_flag___width 1 -#define reg_iop_spu_r_special_stat___n_flag___bit 3 -#define reg_iop_spu_r_special_stat___xor_bus0_r2_0___lsb 4 -#define reg_iop_spu_r_special_stat___xor_bus0_r2_0___width 1 -#define reg_iop_spu_r_special_stat___xor_bus0_r2_0___bit 4 -#define reg_iop_spu_r_special_stat___xor_bus1_r3_0___lsb 5 -#define reg_iop_spu_r_special_stat___xor_bus1_r3_0___width 1 -#define reg_iop_spu_r_special_stat___xor_bus1_r3_0___bit 5 -#define reg_iop_spu_r_special_stat___xor_bus0m_r2_0___lsb 6 -#define reg_iop_spu_r_special_stat___xor_bus0m_r2_0___width 1 -#define reg_iop_spu_r_special_stat___xor_bus0m_r2_0___bit 6 -#define reg_iop_spu_r_special_stat___xor_bus1m_r3_0___lsb 7 -#define reg_iop_spu_r_special_stat___xor_bus1m_r3_0___width 1 -#define reg_iop_spu_r_special_stat___xor_bus1m_r3_0___bit 7 -#define reg_iop_spu_r_special_stat___fsm_in0___lsb 8 -#define reg_iop_spu_r_special_stat___fsm_in0___width 1 -#define reg_iop_spu_r_special_stat___fsm_in0___bit 8 -#define reg_iop_spu_r_special_stat___fsm_in1___lsb 9 -#define reg_iop_spu_r_special_stat___fsm_in1___width 1 -#define reg_iop_spu_r_special_stat___fsm_in1___bit 9 -#define reg_iop_spu_r_special_stat___fsm_in2___lsb 10 -#define reg_iop_spu_r_special_stat___fsm_in2___width 1 -#define reg_iop_spu_r_special_stat___fsm_in2___bit 10 -#define reg_iop_spu_r_special_stat___fsm_in3___lsb 11 -#define reg_iop_spu_r_special_stat___fsm_in3___width 1 -#define reg_iop_spu_r_special_stat___fsm_in3___bit 11 -#define reg_iop_spu_r_special_stat___fsm_in4___lsb 12 -#define reg_iop_spu_r_special_stat___fsm_in4___width 1 -#define reg_iop_spu_r_special_stat___fsm_in4___bit 12 -#define reg_iop_spu_r_special_stat___fsm_in5___lsb 13 -#define reg_iop_spu_r_special_stat___fsm_in5___width 1 -#define reg_iop_spu_r_special_stat___fsm_in5___bit 13 -#define reg_iop_spu_r_special_stat___fsm_in6___lsb 14 -#define reg_iop_spu_r_special_stat___fsm_in6___width 1 -#define reg_iop_spu_r_special_stat___fsm_in6___bit 14 -#define reg_iop_spu_r_special_stat___fsm_in7___lsb 15 -#define reg_iop_spu_r_special_stat___fsm_in7___width 1 -#define reg_iop_spu_r_special_stat___fsm_in7___bit 15 -#define reg_iop_spu_r_special_stat___event0___lsb 16 -#define reg_iop_spu_r_special_stat___event0___width 1 -#define reg_iop_spu_r_special_stat___event0___bit 16 -#define reg_iop_spu_r_special_stat___event1___lsb 17 -#define reg_iop_spu_r_special_stat___event1___width 1 -#define reg_iop_spu_r_special_stat___event1___bit 17 -#define reg_iop_spu_r_special_stat___event2___lsb 18 -#define reg_iop_spu_r_special_stat___event2___width 1 -#define reg_iop_spu_r_special_stat___event2___bit 18 -#define reg_iop_spu_r_special_stat___event3___lsb 19 -#define reg_iop_spu_r_special_stat___event3___width 1 -#define reg_iop_spu_r_special_stat___event3___bit 19 -#define reg_iop_spu_r_special_stat_offset 136 - -/* Register rw_reg_access, scope iop_spu, type rw */ -#define reg_iop_spu_rw_reg_access___addr___lsb 0 -#define reg_iop_spu_rw_reg_access___addr___width 13 -#define reg_iop_spu_rw_reg_access___imm_hi___lsb 16 -#define reg_iop_spu_rw_reg_access___imm_hi___width 16 -#define reg_iop_spu_rw_reg_access_offset 140 - -#define STRIDE_iop_spu_rw_event_cfg 4 -/* Register rw_event_cfg, scope iop_spu, type rw */ -#define reg_iop_spu_rw_event_cfg___addr___lsb 0 -#define reg_iop_spu_rw_event_cfg___addr___width 12 -#define reg_iop_spu_rw_event_cfg___src___lsb 12 -#define reg_iop_spu_rw_event_cfg___src___width 2 -#define reg_iop_spu_rw_event_cfg___eq_en___lsb 14 -#define reg_iop_spu_rw_event_cfg___eq_en___width 1 -#define reg_iop_spu_rw_event_cfg___eq_en___bit 14 -#define reg_iop_spu_rw_event_cfg___eq_inv___lsb 15 -#define reg_iop_spu_rw_event_cfg___eq_inv___width 1 -#define reg_iop_spu_rw_event_cfg___eq_inv___bit 15 -#define reg_iop_spu_rw_event_cfg___gt_en___lsb 16 -#define reg_iop_spu_rw_event_cfg___gt_en___width 1 -#define reg_iop_spu_rw_event_cfg___gt_en___bit 16 -#define reg_iop_spu_rw_event_cfg___gt_inv___lsb 17 -#define reg_iop_spu_rw_event_cfg___gt_inv___width 1 -#define reg_iop_spu_rw_event_cfg___gt_inv___bit 17 -#define reg_iop_spu_rw_event_cfg_offset 144 - -#define STRIDE_iop_spu_rw_event_mask 4 -/* Register rw_event_mask, scope iop_spu, type rw */ -#define reg_iop_spu_rw_event_mask_offset 160 - -#define STRIDE_iop_spu_rw_event_val 4 -/* Register rw_event_val, scope iop_spu, type rw */ -#define reg_iop_spu_rw_event_val_offset 176 - -/* Register rw_event_ret, scope iop_spu, type rw */ -#define reg_iop_spu_rw_event_ret___addr___lsb 0 -#define reg_iop_spu_rw_event_ret___addr___width 12 -#define reg_iop_spu_rw_event_ret_offset 192 - -/* Register r_trace, scope iop_spu, type r */ -#define reg_iop_spu_r_trace___fsm___lsb 0 -#define reg_iop_spu_r_trace___fsm___width 1 -#define reg_iop_spu_r_trace___fsm___bit 0 -#define reg_iop_spu_r_trace___en___lsb 1 -#define reg_iop_spu_r_trace___en___width 1 -#define reg_iop_spu_r_trace___en___bit 1 -#define reg_iop_spu_r_trace___c_flag___lsb 2 -#define reg_iop_spu_r_trace___c_flag___width 1 -#define reg_iop_spu_r_trace___c_flag___bit 2 -#define reg_iop_spu_r_trace___v_flag___lsb 3 -#define reg_iop_spu_r_trace___v_flag___width 1 -#define reg_iop_spu_r_trace___v_flag___bit 3 -#define reg_iop_spu_r_trace___z_flag___lsb 4 -#define reg_iop_spu_r_trace___z_flag___width 1 -#define reg_iop_spu_r_trace___z_flag___bit 4 -#define reg_iop_spu_r_trace___n_flag___lsb 5 -#define reg_iop_spu_r_trace___n_flag___width 1 -#define reg_iop_spu_r_trace___n_flag___bit 5 -#define reg_iop_spu_r_trace___seq_addr___lsb 6 -#define reg_iop_spu_r_trace___seq_addr___width 12 -#define reg_iop_spu_r_trace___fsm_addr___lsb 20 -#define reg_iop_spu_r_trace___fsm_addr___width 12 -#define reg_iop_spu_r_trace_offset 196 - -/* Register r_fsm_trace, scope iop_spu, type r */ -#define reg_iop_spu_r_fsm_trace___fsm___lsb 0 -#define reg_iop_spu_r_fsm_trace___fsm___width 1 -#define reg_iop_spu_r_fsm_trace___fsm___bit 0 -#define reg_iop_spu_r_fsm_trace___en___lsb 1 -#define reg_iop_spu_r_fsm_trace___en___width 1 -#define reg_iop_spu_r_fsm_trace___en___bit 1 -#define reg_iop_spu_r_fsm_trace___tmr_done___lsb 2 -#define reg_iop_spu_r_fsm_trace___tmr_done___width 1 -#define reg_iop_spu_r_fsm_trace___tmr_done___bit 2 -#define reg_iop_spu_r_fsm_trace___inp0___lsb 3 -#define reg_iop_spu_r_fsm_trace___inp0___width 1 -#define reg_iop_spu_r_fsm_trace___inp0___bit 3 -#define reg_iop_spu_r_fsm_trace___inp1___lsb 4 -#define reg_iop_spu_r_fsm_trace___inp1___width 1 -#define reg_iop_spu_r_fsm_trace___inp1___bit 4 -#define reg_iop_spu_r_fsm_trace___inp2___lsb 5 -#define reg_iop_spu_r_fsm_trace___inp2___width 1 -#define reg_iop_spu_r_fsm_trace___inp2___bit 5 -#define reg_iop_spu_r_fsm_trace___inp3___lsb 6 -#define reg_iop_spu_r_fsm_trace___inp3___width 1 -#define reg_iop_spu_r_fsm_trace___inp3___bit 6 -#define reg_iop_spu_r_fsm_trace___event0___lsb 7 -#define reg_iop_spu_r_fsm_trace___event0___width 1 -#define reg_iop_spu_r_fsm_trace___event0___bit 7 -#define reg_iop_spu_r_fsm_trace___event1___lsb 8 -#define reg_iop_spu_r_fsm_trace___event1___width 1 -#define reg_iop_spu_r_fsm_trace___event1___bit 8 -#define reg_iop_spu_r_fsm_trace___event2___lsb 9 -#define reg_iop_spu_r_fsm_trace___event2___width 1 -#define reg_iop_spu_r_fsm_trace___event2___bit 9 -#define reg_iop_spu_r_fsm_trace___event3___lsb 10 -#define reg_iop_spu_r_fsm_trace___event3___width 1 -#define reg_iop_spu_r_fsm_trace___event3___bit 10 -#define reg_iop_spu_r_fsm_trace___gio_out___lsb 11 -#define reg_iop_spu_r_fsm_trace___gio_out___width 8 -#define reg_iop_spu_r_fsm_trace___fsm_addr___lsb 20 -#define reg_iop_spu_r_fsm_trace___fsm_addr___width 12 -#define reg_iop_spu_r_fsm_trace_offset 200 - -#define STRIDE_iop_spu_rw_brp 4 -/* Register rw_brp, scope iop_spu, type rw */ -#define reg_iop_spu_rw_brp___addr___lsb 0 -#define reg_iop_spu_rw_brp___addr___width 12 -#define reg_iop_spu_rw_brp___fsm___lsb 12 -#define reg_iop_spu_rw_brp___fsm___width 1 -#define reg_iop_spu_rw_brp___fsm___bit 12 -#define reg_iop_spu_rw_brp___en___lsb 13 -#define reg_iop_spu_rw_brp___en___width 1 -#define reg_iop_spu_rw_brp___en___bit 13 -#define reg_iop_spu_rw_brp_offset 204 - - -/* Constants */ -#define regk_iop_spu_attn_hi 0x00000005 -#define regk_iop_spu_attn_lo 0x00000005 -#define regk_iop_spu_attn_r0 0x00000000 -#define regk_iop_spu_attn_r1 0x00000001 -#define regk_iop_spu_attn_r10 0x00000002 -#define regk_iop_spu_attn_r11 0x00000003 -#define regk_iop_spu_attn_r12 0x00000004 -#define regk_iop_spu_attn_r13 0x00000005 -#define regk_iop_spu_attn_r14 0x00000006 -#define regk_iop_spu_attn_r15 0x00000007 -#define regk_iop_spu_attn_r2 0x00000002 -#define regk_iop_spu_attn_r3 0x00000003 -#define regk_iop_spu_attn_r4 0x00000004 -#define regk_iop_spu_attn_r5 0x00000005 -#define regk_iop_spu_attn_r6 0x00000006 -#define regk_iop_spu_attn_r7 0x00000007 -#define regk_iop_spu_attn_r8 0x00000000 -#define regk_iop_spu_attn_r9 0x00000001 -#define regk_iop_spu_c 0x00000000 -#define regk_iop_spu_flag 0x00000002 -#define regk_iop_spu_gio_in 0x00000000 -#define regk_iop_spu_gio_out 0x00000005 -#define regk_iop_spu_gio_out0 0x00000008 -#define regk_iop_spu_gio_out1 0x00000009 -#define regk_iop_spu_gio_out2 0x0000000a -#define regk_iop_spu_gio_out3 0x0000000b -#define regk_iop_spu_gio_out4 0x0000000c -#define regk_iop_spu_gio_out5 0x0000000d -#define regk_iop_spu_gio_out6 0x0000000e -#define regk_iop_spu_gio_out7 0x0000000f -#define regk_iop_spu_n 0x00000003 -#define regk_iop_spu_no 0x00000000 -#define regk_iop_spu_r0 0x00000008 -#define regk_iop_spu_r1 0x00000009 -#define regk_iop_spu_r10 0x0000000a -#define regk_iop_spu_r11 0x0000000b -#define regk_iop_spu_r12 0x0000000c -#define regk_iop_spu_r13 0x0000000d -#define regk_iop_spu_r14 0x0000000e -#define regk_iop_spu_r15 0x0000000f -#define regk_iop_spu_r2 0x0000000a -#define regk_iop_spu_r3 0x0000000b -#define regk_iop_spu_r4 0x0000000c -#define regk_iop_spu_r5 0x0000000d -#define regk_iop_spu_r6 0x0000000e -#define regk_iop_spu_r7 0x0000000f -#define regk_iop_spu_r8 0x00000008 -#define regk_iop_spu_r9 0x00000009 -#define regk_iop_spu_reg_hi 0x00000002 -#define regk_iop_spu_reg_lo 0x00000002 -#define regk_iop_spu_rw_brp_default 0x00000000 -#define regk_iop_spu_rw_brp_size 0x00000004 -#define regk_iop_spu_rw_ctrl_default 0x00000000 -#define regk_iop_spu_rw_event_cfg_size 0x00000004 -#define regk_iop_spu_rw_event_mask_size 0x00000004 -#define regk_iop_spu_rw_event_val_size 0x00000004 -#define regk_iop_spu_rw_gio_out_default 0x00000000 -#define regk_iop_spu_rw_r_size 0x00000010 -#define regk_iop_spu_rw_reg_access_default 0x00000000 -#define regk_iop_spu_stat_in 0x00000002 -#define regk_iop_spu_statin_hi 0x00000004 -#define regk_iop_spu_statin_lo 0x00000004 -#define regk_iop_spu_trig 0x00000003 -#define regk_iop_spu_trigger 0x00000006 -#define regk_iop_spu_v 0x00000001 -#define regk_iop_spu_wsts_gioout_spec 0x00000001 -#define regk_iop_spu_xor 0x00000003 -#define regk_iop_spu_xor_bus0_r2_0 0x00000000 -#define regk_iop_spu_xor_bus0m_r2_0 0x00000002 -#define regk_iop_spu_xor_bus1_r3_0 0x00000001 -#define regk_iop_spu_xor_bus1m_r3_0 0x00000003 -#define regk_iop_spu_yes 0x00000001 -#define regk_iop_spu_z 0x00000002 -#endif /* __iop_spu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h deleted file mode 100644 index 3be60f9b024c..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h +++ /dev/null @@ -1,1052 +0,0 @@ -#ifndef __iop_sw_cfg_defs_asm_h -#define __iop_sw_cfg_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_cfg_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r - * id: $Id: iop_sw_cfg_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_crc_par0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_crc_par0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_crc_par0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_crc_par0_owner_offset 0 - -/* Register rw_crc_par1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_crc_par1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_crc_par1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_crc_par1_owner_offset 4 - -/* Register rw_dmc_in0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_dmc_in0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_dmc_in0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_dmc_in0_owner_offset 8 - -/* Register rw_dmc_in1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_dmc_in1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_dmc_in1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_dmc_in1_owner_offset 12 - -/* Register rw_dmc_out0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_dmc_out0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_dmc_out0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_dmc_out0_owner_offset 16 - -/* Register rw_dmc_out1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_dmc_out1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_dmc_out1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_dmc_out1_owner_offset 20 - -/* Register rw_fifo_in0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_in0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_in0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_in0_owner_offset 24 - -/* Register rw_fifo_in0_extra_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_in0_extra_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_in0_extra_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_in0_extra_owner_offset 28 - -/* Register rw_fifo_in1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_in1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_in1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_in1_owner_offset 32 - -/* Register rw_fifo_in1_extra_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_in1_extra_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_in1_extra_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_in1_extra_owner_offset 36 - -/* Register rw_fifo_out0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_out0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_out0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_out0_owner_offset 40 - -/* Register rw_fifo_out0_extra_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_out0_extra_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_out0_extra_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_out0_extra_owner_offset 44 - -/* Register rw_fifo_out1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_out1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_out1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_out1_owner_offset 48 - -/* Register rw_fifo_out1_extra_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_out1_extra_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_out1_extra_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_out1_extra_owner_offset 52 - -/* Register rw_sap_in_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_sap_in_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_sap_in_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_sap_in_owner_offset 56 - -/* Register rw_sap_out_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_sap_out_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_sap_out_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_sap_out_owner_offset 60 - -/* Register rw_scrc_in0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_scrc_in0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_scrc_in0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_scrc_in0_owner_offset 64 - -/* Register rw_scrc_in1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_scrc_in1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_scrc_in1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_scrc_in1_owner_offset 68 - -/* Register rw_scrc_out0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_scrc_out0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_scrc_out0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_scrc_out0_owner_offset 72 - -/* Register rw_scrc_out1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_scrc_out1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_scrc_out1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_scrc_out1_owner_offset 76 - -/* Register rw_spu0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_spu0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_spu0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_spu0_owner_offset 80 - -/* Register rw_spu1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_spu1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_spu1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_spu1_owner_offset 84 - -/* Register rw_timer_grp0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_timer_grp0_owner_offset 88 - -/* Register rw_timer_grp1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_timer_grp1_owner_offset 92 - -/* Register rw_timer_grp2_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp2_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp2_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_timer_grp2_owner_offset 96 - -/* Register rw_timer_grp3_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp3_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp3_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_timer_grp3_owner_offset 100 - -/* Register rw_trigger_grp0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp0_owner_offset 104 - -/* Register rw_trigger_grp1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp1_owner_offset 108 - -/* Register rw_trigger_grp2_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp2_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp2_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp2_owner_offset 112 - -/* Register rw_trigger_grp3_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp3_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp3_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp3_owner_offset 116 - -/* Register rw_trigger_grp4_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp4_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp4_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp4_owner_offset 120 - -/* Register rw_trigger_grp5_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp5_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp5_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp5_owner_offset 124 - -/* Register rw_trigger_grp6_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp6_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp6_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp6_owner_offset 128 - -/* Register rw_trigger_grp7_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp7_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp7_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp7_owner_offset 132 - -/* Register rw_bus0_mask, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_bus0_mask___byte0___lsb 0 -#define reg_iop_sw_cfg_rw_bus0_mask___byte0___width 8 -#define reg_iop_sw_cfg_rw_bus0_mask___byte1___lsb 8 -#define reg_iop_sw_cfg_rw_bus0_mask___byte1___width 8 -#define reg_iop_sw_cfg_rw_bus0_mask___byte2___lsb 16 -#define reg_iop_sw_cfg_rw_bus0_mask___byte2___width 8 -#define reg_iop_sw_cfg_rw_bus0_mask___byte3___lsb 24 -#define reg_iop_sw_cfg_rw_bus0_mask___byte3___width 8 -#define reg_iop_sw_cfg_rw_bus0_mask_offset 136 - -/* Register rw_bus0_oe_mask, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte0___lsb 0 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte0___width 1 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte0___bit 0 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte1___lsb 1 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte1___width 1 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte1___bit 1 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte2___lsb 2 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte2___width 1 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte2___bit 2 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte3___lsb 3 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte3___width 1 -#define reg_iop_sw_cfg_rw_bus0_oe_mask___byte3___bit 3 -#define reg_iop_sw_cfg_rw_bus0_oe_mask_offset 140 - -/* Register rw_bus1_mask, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_bus1_mask___byte0___lsb 0 -#define reg_iop_sw_cfg_rw_bus1_mask___byte0___width 8 -#define reg_iop_sw_cfg_rw_bus1_mask___byte1___lsb 8 -#define reg_iop_sw_cfg_rw_bus1_mask___byte1___width 8 -#define reg_iop_sw_cfg_rw_bus1_mask___byte2___lsb 16 -#define reg_iop_sw_cfg_rw_bus1_mask___byte2___width 8 -#define reg_iop_sw_cfg_rw_bus1_mask___byte3___lsb 24 -#define reg_iop_sw_cfg_rw_bus1_mask___byte3___width 8 -#define reg_iop_sw_cfg_rw_bus1_mask_offset 144 - -/* Register rw_bus1_oe_mask, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte0___lsb 0 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte0___width 1 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte0___bit 0 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte1___lsb 1 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte1___width 1 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte1___bit 1 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte2___lsb 2 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte2___width 1 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte2___bit 2 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte3___lsb 3 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte3___width 1 -#define reg_iop_sw_cfg_rw_bus1_oe_mask___byte3___bit 3 -#define reg_iop_sw_cfg_rw_bus1_oe_mask_offset 148 - -/* Register rw_gio_mask, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_mask___val___lsb 0 -#define reg_iop_sw_cfg_rw_gio_mask___val___width 32 -#define reg_iop_sw_cfg_rw_gio_mask_offset 152 - -/* Register rw_gio_oe_mask, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_oe_mask___val___lsb 0 -#define reg_iop_sw_cfg_rw_gio_oe_mask___val___width 32 -#define reg_iop_sw_cfg_rw_gio_oe_mask_offset 156 - -/* Register rw_pinmapping, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte0___lsb 0 -#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte0___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte1___lsb 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte1___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte2___lsb 4 -#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte2___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte3___lsb 6 -#define reg_iop_sw_cfg_rw_pinmapping___bus0_byte3___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte0___lsb 8 -#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte0___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte1___lsb 10 -#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte1___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte2___lsb 12 -#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte2___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte3___lsb 14 -#define reg_iop_sw_cfg_rw_pinmapping___bus1_byte3___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio3_0___lsb 16 -#define reg_iop_sw_cfg_rw_pinmapping___gio3_0___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio7_4___lsb 18 -#define reg_iop_sw_cfg_rw_pinmapping___gio7_4___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio11_8___lsb 20 -#define reg_iop_sw_cfg_rw_pinmapping___gio11_8___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio15_12___lsb 22 -#define reg_iop_sw_cfg_rw_pinmapping___gio15_12___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio19_16___lsb 24 -#define reg_iop_sw_cfg_rw_pinmapping___gio19_16___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio23_20___lsb 26 -#define reg_iop_sw_cfg_rw_pinmapping___gio23_20___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio27_24___lsb 28 -#define reg_iop_sw_cfg_rw_pinmapping___gio27_24___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio31_28___lsb 30 -#define reg_iop_sw_cfg_rw_pinmapping___gio31_28___width 2 -#define reg_iop_sw_cfg_rw_pinmapping_offset 160 - -/* Register rw_bus_out_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_lo___lsb 0 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_lo___width 3 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_hi___lsb 3 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_hi___width 3 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_lo_oe___lsb 6 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_lo_oe___width 3 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_hi_oe___lsb 9 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus0_hi_oe___width 3 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_lo___lsb 12 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_lo___width 3 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_hi___lsb 15 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_hi___width 3 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_lo_oe___lsb 18 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_lo_oe___width 3 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_hi_oe___lsb 21 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus1_hi_oe___width 3 -#define reg_iop_sw_cfg_rw_bus_out_cfg_offset 164 - -/* Register rw_gio_out_grp0_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1___lsb 6 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___lsb 10 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___lsb 16 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3___lsb 18 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___lsb 22 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg_offset 168 - -/* Register rw_gio_out_grp1_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5___lsb 6 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___lsb 10 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___lsb 16 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7___lsb 18 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___lsb 22 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg_offset 172 - -/* Register rw_gio_out_grp2_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9___lsb 6 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___lsb 10 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___lsb 16 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11___lsb 18 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___lsb 22 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg_offset 176 - -/* Register rw_gio_out_grp3_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13___lsb 6 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___lsb 10 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___lsb 16 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15___lsb 18 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___lsb 22 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg_offset 180 - -/* Register rw_gio_out_grp4_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17___lsb 6 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___lsb 10 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___lsb 16 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19___lsb 18 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___lsb 22 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg_offset 184 - -/* Register rw_gio_out_grp5_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21___lsb 6 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___lsb 10 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___lsb 16 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23___lsb 18 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___lsb 22 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg_offset 188 - -/* Register rw_gio_out_grp6_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25___lsb 6 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___lsb 10 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___lsb 16 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27___lsb 18 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___lsb 22 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg_offset 192 - -/* Register rw_gio_out_grp7_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29___lsb 6 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___lsb 10 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___lsb 16 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31___lsb 18 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31___width 4 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___lsb 22 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___width 2 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg_offset 196 - -/* Register rw_spu0_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_spu0_cfg___bus0_in___lsb 0 -#define reg_iop_sw_cfg_rw_spu0_cfg___bus0_in___width 2 -#define reg_iop_sw_cfg_rw_spu0_cfg___bus1_in___lsb 2 -#define reg_iop_sw_cfg_rw_spu0_cfg___bus1_in___width 2 -#define reg_iop_sw_cfg_rw_spu0_cfg_offset 200 - -/* Register rw_spu1_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_spu1_cfg___bus0_in___lsb 0 -#define reg_iop_sw_cfg_rw_spu1_cfg___bus0_in___width 2 -#define reg_iop_sw_cfg_rw_spu1_cfg___bus1_in___lsb 2 -#define reg_iop_sw_cfg_rw_spu1_cfg___bus1_in___width 2 -#define reg_iop_sw_cfg_rw_spu1_cfg_offset 204 - -/* Register rw_timer_grp0_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___ext_clk___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___ext_clk___width 3 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___lsb 3 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___bit 3 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___lsb 4 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___bit 4 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___lsb 5 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___bit 5 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___lsb 6 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___bit 6 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___lsb 7 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___bit 7 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___lsb 8 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___bit 8 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___lsb 9 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___bit 9 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___lsb 10 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___bit 10 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg_offset 208 - -/* Register rw_timer_grp1_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___ext_clk___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___ext_clk___width 3 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___lsb 3 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___bit 3 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___lsb 4 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___bit 4 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___lsb 5 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___bit 5 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___lsb 6 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___bit 6 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___lsb 7 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___bit 7 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___lsb 8 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___bit 8 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___lsb 9 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___bit 9 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___lsb 10 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___bit 10 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg_offset 212 - -/* Register rw_timer_grp2_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___ext_clk___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___ext_clk___width 3 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_en___lsb 3 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_en___bit 3 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_en___lsb 4 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_en___bit 4 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_en___lsb 5 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_en___bit 5 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_en___lsb 6 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_en___bit 6 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_dis___lsb 7 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr0_dis___bit 7 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_dis___lsb 8 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr1_dis___bit 8 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_dis___lsb 9 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr2_dis___bit 9 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_dis___lsb 10 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg___tmr3_dis___bit 10 -#define reg_iop_sw_cfg_rw_timer_grp2_cfg_offset 216 - -/* Register rw_timer_grp3_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___ext_clk___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___ext_clk___width 3 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_en___lsb 3 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_en___bit 3 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_en___lsb 4 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_en___bit 4 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_en___lsb 5 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_en___bit 5 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_en___lsb 6 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_en___width 1 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_en___bit 6 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_dis___lsb 7 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr0_dis___bit 7 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_dis___lsb 8 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr1_dis___bit 8 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_dis___lsb 9 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr2_dis___bit 9 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_dis___lsb 10 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_dis___width 1 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg___tmr3_dis___bit 10 -#define reg_iop_sw_cfg_rw_timer_grp3_cfg_offset 220 - -/* Register rw_trigger_grps_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___bit 0 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___lsb 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___bit 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___lsb 2 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___bit 2 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___lsb 3 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___bit 3 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___lsb 4 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___bit 4 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___lsb 5 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___bit 5 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___lsb 6 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___bit 6 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___lsb 7 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___bit 7 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___lsb 8 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___bit 8 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___lsb 9 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___bit 9 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___lsb 10 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___bit 10 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___lsb 11 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___bit 11 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___lsb 12 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___bit 12 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___lsb 13 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___bit 13 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___lsb 14 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___bit 14 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___lsb 15 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___bit 15 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg_offset 224 - -/* Register rw_pdp0_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_pdp0_cfg___dmc0_usr___lsb 0 -#define reg_iop_sw_cfg_rw_pdp0_cfg___dmc0_usr___width 1 -#define reg_iop_sw_cfg_rw_pdp0_cfg___dmc0_usr___bit 0 -#define reg_iop_sw_cfg_rw_pdp0_cfg___out_strb___lsb 1 -#define reg_iop_sw_cfg_rw_pdp0_cfg___out_strb___width 5 -#define reg_iop_sw_cfg_rw_pdp0_cfg___in_src___lsb 6 -#define reg_iop_sw_cfg_rw_pdp0_cfg___in_src___width 3 -#define reg_iop_sw_cfg_rw_pdp0_cfg___in_size___lsb 9 -#define reg_iop_sw_cfg_rw_pdp0_cfg___in_size___width 3 -#define reg_iop_sw_cfg_rw_pdp0_cfg___in_last___lsb 12 -#define reg_iop_sw_cfg_rw_pdp0_cfg___in_last___width 2 -#define reg_iop_sw_cfg_rw_pdp0_cfg___in_strb___lsb 14 -#define reg_iop_sw_cfg_rw_pdp0_cfg___in_strb___width 4 -#define reg_iop_sw_cfg_rw_pdp0_cfg___out_src___lsb 18 -#define reg_iop_sw_cfg_rw_pdp0_cfg___out_src___width 1 -#define reg_iop_sw_cfg_rw_pdp0_cfg___out_src___bit 18 -#define reg_iop_sw_cfg_rw_pdp0_cfg_offset 228 - -/* Register rw_pdp1_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_pdp1_cfg___dmc1_usr___lsb 0 -#define reg_iop_sw_cfg_rw_pdp1_cfg___dmc1_usr___width 1 -#define reg_iop_sw_cfg_rw_pdp1_cfg___dmc1_usr___bit 0 -#define reg_iop_sw_cfg_rw_pdp1_cfg___out_strb___lsb 1 -#define reg_iop_sw_cfg_rw_pdp1_cfg___out_strb___width 5 -#define reg_iop_sw_cfg_rw_pdp1_cfg___in_src___lsb 6 -#define reg_iop_sw_cfg_rw_pdp1_cfg___in_src___width 3 -#define reg_iop_sw_cfg_rw_pdp1_cfg___in_size___lsb 9 -#define reg_iop_sw_cfg_rw_pdp1_cfg___in_size___width 3 -#define reg_iop_sw_cfg_rw_pdp1_cfg___in_last___lsb 12 -#define reg_iop_sw_cfg_rw_pdp1_cfg___in_last___width 2 -#define reg_iop_sw_cfg_rw_pdp1_cfg___in_strb___lsb 14 -#define reg_iop_sw_cfg_rw_pdp1_cfg___in_strb___width 4 -#define reg_iop_sw_cfg_rw_pdp1_cfg___out_src___lsb 18 -#define reg_iop_sw_cfg_rw_pdp1_cfg___out_src___width 1 -#define reg_iop_sw_cfg_rw_pdp1_cfg___out_src___bit 18 -#define reg_iop_sw_cfg_rw_pdp1_cfg_offset 232 - -/* Register rw_sdp_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out0_strb___lsb 0 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out0_strb___width 3 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out1_strb___lsb 3 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out1_strb___width 3 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_data___lsb 6 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_data___width 3 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_last___lsb 9 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_last___width 2 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_strb___lsb 11 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in0_strb___width 3 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_data___lsb 14 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_data___width 3 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_last___lsb 17 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_last___width 2 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_strb___lsb 19 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in1_strb___width 3 -#define reg_iop_sw_cfg_rw_sdp_cfg_offset 236 - - -/* Constants */ -#define regk_iop_sw_cfg_a 0x00000001 -#define regk_iop_sw_cfg_b 0x00000002 -#define regk_iop_sw_cfg_bus0 0x00000000 -#define regk_iop_sw_cfg_bus0_rot16 0x00000004 -#define regk_iop_sw_cfg_bus0_rot24 0x00000006 -#define regk_iop_sw_cfg_bus0_rot8 0x00000002 -#define regk_iop_sw_cfg_bus1 0x00000001 -#define regk_iop_sw_cfg_bus1_rot16 0x00000005 -#define regk_iop_sw_cfg_bus1_rot24 0x00000007 -#define regk_iop_sw_cfg_bus1_rot8 0x00000003 -#define regk_iop_sw_cfg_clk12 0x00000000 -#define regk_iop_sw_cfg_cpu 0x00000000 -#define regk_iop_sw_cfg_dmc0 0x00000000 -#define regk_iop_sw_cfg_dmc1 0x00000001 -#define regk_iop_sw_cfg_gated_clk0 0x00000010 -#define regk_iop_sw_cfg_gated_clk1 0x00000011 -#define regk_iop_sw_cfg_gated_clk2 0x00000012 -#define regk_iop_sw_cfg_gated_clk3 0x00000013 -#define regk_iop_sw_cfg_gio0 0x00000004 -#define regk_iop_sw_cfg_gio1 0x00000001 -#define regk_iop_sw_cfg_gio2 0x00000005 -#define regk_iop_sw_cfg_gio3 0x00000002 -#define regk_iop_sw_cfg_gio4 0x00000006 -#define regk_iop_sw_cfg_gio5 0x00000003 -#define regk_iop_sw_cfg_gio6 0x00000007 -#define regk_iop_sw_cfg_gio7 0x00000004 -#define regk_iop_sw_cfg_gio_in0 0x00000000 -#define regk_iop_sw_cfg_gio_in1 0x00000001 -#define regk_iop_sw_cfg_gio_in10 0x00000002 -#define regk_iop_sw_cfg_gio_in11 0x00000003 -#define regk_iop_sw_cfg_gio_in14 0x00000004 -#define regk_iop_sw_cfg_gio_in15 0x00000005 -#define regk_iop_sw_cfg_gio_in18 0x00000002 -#define regk_iop_sw_cfg_gio_in19 0x00000003 -#define regk_iop_sw_cfg_gio_in20 0x00000004 -#define regk_iop_sw_cfg_gio_in21 0x00000005 -#define regk_iop_sw_cfg_gio_in26 0x00000006 -#define regk_iop_sw_cfg_gio_in27 0x00000007 -#define regk_iop_sw_cfg_gio_in28 0x00000006 -#define regk_iop_sw_cfg_gio_in29 0x00000007 -#define regk_iop_sw_cfg_gio_in4 0x00000000 -#define regk_iop_sw_cfg_gio_in5 0x00000001 -#define regk_iop_sw_cfg_last_timer_grp0_tmr2 0x00000001 -#define regk_iop_sw_cfg_last_timer_grp1_tmr2 0x00000001 -#define regk_iop_sw_cfg_last_timer_grp2_tmr2 0x00000002 -#define regk_iop_sw_cfg_last_timer_grp2_tmr3 0x00000003 -#define regk_iop_sw_cfg_last_timer_grp3_tmr2 0x00000002 -#define regk_iop_sw_cfg_last_timer_grp3_tmr3 0x00000003 -#define regk_iop_sw_cfg_mpu 0x00000001 -#define regk_iop_sw_cfg_none 0x00000000 -#define regk_iop_sw_cfg_par0 0x00000000 -#define regk_iop_sw_cfg_par1 0x00000001 -#define regk_iop_sw_cfg_pdp_out0 0x00000002 -#define regk_iop_sw_cfg_pdp_out0_hi 0x00000001 -#define regk_iop_sw_cfg_pdp_out0_hi_rot8 0x00000005 -#define regk_iop_sw_cfg_pdp_out0_lo 0x00000000 -#define regk_iop_sw_cfg_pdp_out0_lo_rot8 0x00000004 -#define regk_iop_sw_cfg_pdp_out1 0x00000003 -#define regk_iop_sw_cfg_pdp_out1_hi 0x00000003 -#define regk_iop_sw_cfg_pdp_out1_hi_rot8 0x00000005 -#define regk_iop_sw_cfg_pdp_out1_lo 0x00000002 -#define regk_iop_sw_cfg_pdp_out1_lo_rot8 0x00000004 -#define regk_iop_sw_cfg_rw_bus0_mask_default 0x00000000 -#define regk_iop_sw_cfg_rw_bus0_oe_mask_default 0x00000000 -#define regk_iop_sw_cfg_rw_bus1_mask_default 0x00000000 -#define regk_iop_sw_cfg_rw_bus1_oe_mask_default 0x00000000 -#define regk_iop_sw_cfg_rw_bus_out_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_crc_par0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_crc_par1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_dmc_in0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_dmc_in1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_dmc_out0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_dmc_out1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_in0_extra_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_in0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_in1_extra_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_in1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_out0_extra_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_out0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_out1_extra_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_out1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_mask_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_oe_mask_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp0_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp1_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp2_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp3_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp4_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp5_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp6_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp7_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_pdp0_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_pdp1_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_pinmapping_default 0x55555555 -#define regk_iop_sw_cfg_rw_sap_in_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_sap_out_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_scrc_in0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_scrc_in1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_scrc_out0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_scrc_out1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_sdp_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_spu0_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_spu0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_spu1_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_spu1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp0_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp1_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp2_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp2_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp3_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp3_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp2_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp3_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp4_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp5_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp6_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp7_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grps_cfg_default 0x00000000 -#define regk_iop_sw_cfg_sdp_out0 0x00000008 -#define regk_iop_sw_cfg_sdp_out1 0x00000009 -#define regk_iop_sw_cfg_size16 0x00000002 -#define regk_iop_sw_cfg_size24 0x00000003 -#define regk_iop_sw_cfg_size32 0x00000004 -#define regk_iop_sw_cfg_size8 0x00000001 -#define regk_iop_sw_cfg_spu0 0x00000002 -#define regk_iop_sw_cfg_spu0_bus_out0_hi 0x00000006 -#define regk_iop_sw_cfg_spu0_bus_out0_lo 0x00000006 -#define regk_iop_sw_cfg_spu0_bus_out1_hi 0x00000007 -#define regk_iop_sw_cfg_spu0_bus_out1_lo 0x00000007 -#define regk_iop_sw_cfg_spu0_g0 0x0000000e -#define regk_iop_sw_cfg_spu0_g1 0x0000000e -#define regk_iop_sw_cfg_spu0_g2 0x0000000e -#define regk_iop_sw_cfg_spu0_g3 0x0000000e -#define regk_iop_sw_cfg_spu0_g4 0x0000000e -#define regk_iop_sw_cfg_spu0_g5 0x0000000e -#define regk_iop_sw_cfg_spu0_g6 0x0000000e -#define regk_iop_sw_cfg_spu0_g7 0x0000000e -#define regk_iop_sw_cfg_spu0_gio0 0x00000000 -#define regk_iop_sw_cfg_spu0_gio1 0x00000001 -#define regk_iop_sw_cfg_spu0_gio2 0x00000000 -#define regk_iop_sw_cfg_spu0_gio5 0x00000005 -#define regk_iop_sw_cfg_spu0_gio6 0x00000006 -#define regk_iop_sw_cfg_spu0_gio7 0x00000007 -#define regk_iop_sw_cfg_spu0_gio_out0 0x00000008 -#define regk_iop_sw_cfg_spu0_gio_out1 0x00000009 -#define regk_iop_sw_cfg_spu0_gio_out2 0x0000000a -#define regk_iop_sw_cfg_spu0_gio_out3 0x0000000b -#define regk_iop_sw_cfg_spu0_gio_out4 0x0000000c -#define regk_iop_sw_cfg_spu0_gio_out5 0x0000000d -#define regk_iop_sw_cfg_spu0_gio_out6 0x0000000e -#define regk_iop_sw_cfg_spu0_gio_out7 0x0000000f -#define regk_iop_sw_cfg_spu0_gioout0 0x00000000 -#define regk_iop_sw_cfg_spu0_gioout1 0x00000000 -#define regk_iop_sw_cfg_spu0_gioout10 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout11 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout12 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout13 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout14 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout15 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout16 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout17 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout18 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout19 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout2 0x00000002 -#define regk_iop_sw_cfg_spu0_gioout20 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout21 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout22 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout23 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout24 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout25 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout26 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout27 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout28 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout29 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout3 0x00000002 -#define regk_iop_sw_cfg_spu0_gioout30 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout31 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout4 0x00000004 -#define regk_iop_sw_cfg_spu0_gioout5 0x00000004 -#define regk_iop_sw_cfg_spu0_gioout6 0x00000006 -#define regk_iop_sw_cfg_spu0_gioout7 0x00000006 -#define regk_iop_sw_cfg_spu0_gioout8 0x0000000e -#define regk_iop_sw_cfg_spu0_gioout9 0x0000000e -#define regk_iop_sw_cfg_spu1 0x00000003 -#define regk_iop_sw_cfg_spu1_bus_out0_hi 0x00000006 -#define regk_iop_sw_cfg_spu1_bus_out0_lo 0x00000006 -#define regk_iop_sw_cfg_spu1_bus_out1_hi 0x00000007 -#define regk_iop_sw_cfg_spu1_bus_out1_lo 0x00000007 -#define regk_iop_sw_cfg_spu1_g0 0x0000000f -#define regk_iop_sw_cfg_spu1_g1 0x0000000f -#define regk_iop_sw_cfg_spu1_g2 0x0000000f -#define regk_iop_sw_cfg_spu1_g3 0x0000000f -#define regk_iop_sw_cfg_spu1_g4 0x0000000f -#define regk_iop_sw_cfg_spu1_g5 0x0000000f -#define regk_iop_sw_cfg_spu1_g6 0x0000000f -#define regk_iop_sw_cfg_spu1_g7 0x0000000f -#define regk_iop_sw_cfg_spu1_gio0 0x00000002 -#define regk_iop_sw_cfg_spu1_gio1 0x00000003 -#define regk_iop_sw_cfg_spu1_gio2 0x00000002 -#define regk_iop_sw_cfg_spu1_gio5 0x00000005 -#define regk_iop_sw_cfg_spu1_gio6 0x00000006 -#define regk_iop_sw_cfg_spu1_gio7 0x00000007 -#define regk_iop_sw_cfg_spu1_gio_out0 0x00000008 -#define regk_iop_sw_cfg_spu1_gio_out1 0x00000009 -#define regk_iop_sw_cfg_spu1_gio_out2 0x0000000a -#define regk_iop_sw_cfg_spu1_gio_out3 0x0000000b -#define regk_iop_sw_cfg_spu1_gio_out4 0x0000000c -#define regk_iop_sw_cfg_spu1_gio_out5 0x0000000d -#define regk_iop_sw_cfg_spu1_gio_out6 0x0000000e -#define regk_iop_sw_cfg_spu1_gio_out7 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout0 0x00000001 -#define regk_iop_sw_cfg_spu1_gioout1 0x00000001 -#define regk_iop_sw_cfg_spu1_gioout10 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout11 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout12 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout13 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout14 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout15 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout16 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout17 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout18 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout19 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout2 0x00000003 -#define regk_iop_sw_cfg_spu1_gioout20 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout21 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout22 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout23 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout24 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout25 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout26 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout27 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout28 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout29 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout3 0x00000003 -#define regk_iop_sw_cfg_spu1_gioout30 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout31 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout4 0x00000005 -#define regk_iop_sw_cfg_spu1_gioout5 0x00000005 -#define regk_iop_sw_cfg_spu1_gioout6 0x00000007 -#define regk_iop_sw_cfg_spu1_gioout7 0x00000007 -#define regk_iop_sw_cfg_spu1_gioout8 0x0000000f -#define regk_iop_sw_cfg_spu1_gioout9 0x0000000f -#define regk_iop_sw_cfg_strb_timer_grp0_tmr0 0x00000001 -#define regk_iop_sw_cfg_strb_timer_grp0_tmr1 0x00000002 -#define regk_iop_sw_cfg_strb_timer_grp1_tmr0 0x00000001 -#define regk_iop_sw_cfg_strb_timer_grp1_tmr1 0x00000002 -#define regk_iop_sw_cfg_strb_timer_grp2_tmr0 0x00000003 -#define regk_iop_sw_cfg_strb_timer_grp2_tmr1 0x00000002 -#define regk_iop_sw_cfg_strb_timer_grp3_tmr0 0x00000003 -#define regk_iop_sw_cfg_strb_timer_grp3_tmr1 0x00000002 -#define regk_iop_sw_cfg_timer_grp0 0x00000000 -#define regk_iop_sw_cfg_timer_grp0_rot 0x00000001 -#define regk_iop_sw_cfg_timer_grp0_strb0 0x0000000a -#define regk_iop_sw_cfg_timer_grp0_strb1 0x0000000a -#define regk_iop_sw_cfg_timer_grp0_strb2 0x0000000a -#define regk_iop_sw_cfg_timer_grp0_strb3 0x0000000a -#define regk_iop_sw_cfg_timer_grp0_tmr0 0x00000004 -#define regk_iop_sw_cfg_timer_grp0_tmr1 0x00000004 -#define regk_iop_sw_cfg_timer_grp1 0x00000000 -#define regk_iop_sw_cfg_timer_grp1_rot 0x00000001 -#define regk_iop_sw_cfg_timer_grp1_strb0 0x0000000b -#define regk_iop_sw_cfg_timer_grp1_strb1 0x0000000b -#define regk_iop_sw_cfg_timer_grp1_strb2 0x0000000b -#define regk_iop_sw_cfg_timer_grp1_strb3 0x0000000b -#define regk_iop_sw_cfg_timer_grp1_tmr0 0x00000005 -#define regk_iop_sw_cfg_timer_grp1_tmr1 0x00000005 -#define regk_iop_sw_cfg_timer_grp2 0x00000000 -#define regk_iop_sw_cfg_timer_grp2_rot 0x00000001 -#define regk_iop_sw_cfg_timer_grp2_strb0 0x0000000c -#define regk_iop_sw_cfg_timer_grp2_strb1 0x0000000c -#define regk_iop_sw_cfg_timer_grp2_strb2 0x0000000c -#define regk_iop_sw_cfg_timer_grp2_strb3 0x0000000c -#define regk_iop_sw_cfg_timer_grp2_tmr0 0x00000006 -#define regk_iop_sw_cfg_timer_grp2_tmr1 0x00000006 -#define regk_iop_sw_cfg_timer_grp3 0x00000000 -#define regk_iop_sw_cfg_timer_grp3_rot 0x00000001 -#define regk_iop_sw_cfg_timer_grp3_strb0 0x0000000d -#define regk_iop_sw_cfg_timer_grp3_strb1 0x0000000d -#define regk_iop_sw_cfg_timer_grp3_strb2 0x0000000d -#define regk_iop_sw_cfg_timer_grp3_strb3 0x0000000d -#define regk_iop_sw_cfg_timer_grp3_tmr0 0x00000007 -#define regk_iop_sw_cfg_timer_grp3_tmr1 0x00000007 -#define regk_iop_sw_cfg_trig0_0 0x00000000 -#define regk_iop_sw_cfg_trig0_1 0x00000000 -#define regk_iop_sw_cfg_trig0_2 0x00000000 -#define regk_iop_sw_cfg_trig0_3 0x00000000 -#define regk_iop_sw_cfg_trig1_0 0x00000000 -#define regk_iop_sw_cfg_trig1_1 0x00000000 -#define regk_iop_sw_cfg_trig1_2 0x00000000 -#define regk_iop_sw_cfg_trig1_3 0x00000000 -#define regk_iop_sw_cfg_trig2_0 0x00000000 -#define regk_iop_sw_cfg_trig2_1 0x00000000 -#define regk_iop_sw_cfg_trig2_2 0x00000000 -#define regk_iop_sw_cfg_trig2_3 0x00000000 -#define regk_iop_sw_cfg_trig3_0 0x00000000 -#define regk_iop_sw_cfg_trig3_1 0x00000000 -#define regk_iop_sw_cfg_trig3_2 0x00000000 -#define regk_iop_sw_cfg_trig3_3 0x00000000 -#define regk_iop_sw_cfg_trig4_0 0x00000001 -#define regk_iop_sw_cfg_trig4_1 0x00000001 -#define regk_iop_sw_cfg_trig4_2 0x00000001 -#define regk_iop_sw_cfg_trig4_3 0x00000001 -#define regk_iop_sw_cfg_trig5_0 0x00000001 -#define regk_iop_sw_cfg_trig5_1 0x00000001 -#define regk_iop_sw_cfg_trig5_2 0x00000001 -#define regk_iop_sw_cfg_trig5_3 0x00000001 -#define regk_iop_sw_cfg_trig6_0 0x00000001 -#define regk_iop_sw_cfg_trig6_1 0x00000001 -#define regk_iop_sw_cfg_trig6_2 0x00000001 -#define regk_iop_sw_cfg_trig6_3 0x00000001 -#define regk_iop_sw_cfg_trig7_0 0x00000001 -#define regk_iop_sw_cfg_trig7_1 0x00000001 -#define regk_iop_sw_cfg_trig7_2 0x00000001 -#define regk_iop_sw_cfg_trig7_3 0x00000001 -#endif /* __iop_sw_cfg_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h deleted file mode 100644 index db347bcba025..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h +++ /dev/null @@ -1,1758 +0,0 @@ -#ifndef __iop_sw_cpu_defs_asm_h -#define __iop_sw_cpu_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_cpu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r - * id: $Id: iop_sw_cpu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_mc_ctrl, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___lsb 0 -#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___width 1 -#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___bit 0 -#define reg_iop_sw_cpu_rw_mc_ctrl___cmd___lsb 1 -#define reg_iop_sw_cpu_rw_mc_ctrl___cmd___width 2 -#define reg_iop_sw_cpu_rw_mc_ctrl___size___lsb 3 -#define reg_iop_sw_cpu_rw_mc_ctrl___size___width 3 -#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu0_mem___lsb 6 -#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu0_mem___width 1 -#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu0_mem___bit 6 -#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu1_mem___lsb 7 -#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu1_mem___width 1 -#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu1_mem___bit 7 -#define reg_iop_sw_cpu_rw_mc_ctrl_offset 0 - -/* Register rw_mc_data, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_mc_data___val___lsb 0 -#define reg_iop_sw_cpu_rw_mc_data___val___width 32 -#define reg_iop_sw_cpu_rw_mc_data_offset 4 - -/* Register rw_mc_addr, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_mc_addr_offset 8 - -/* Register rs_mc_data, scope iop_sw_cpu, type rs */ -#define reg_iop_sw_cpu_rs_mc_data_offset 12 - -/* Register r_mc_data, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_mc_data_offset 16 - -/* Register r_mc_stat, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___lsb 0 -#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___width 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___bit 0 -#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___lsb 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___width 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___bit 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_spu0___lsb 2 -#define reg_iop_sw_cpu_r_mc_stat___busy_spu0___width 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_spu0___bit 2 -#define reg_iop_sw_cpu_r_mc_stat___busy_spu1___lsb 3 -#define reg_iop_sw_cpu_r_mc_stat___busy_spu1___width 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_spu1___bit 3 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___lsb 4 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___width 1 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___bit 4 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___lsb 5 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___width 1 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___bit 5 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu0___lsb 6 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu0___width 1 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu0___bit 6 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu1___lsb 7 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu1___width 1 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu1___bit 7 -#define reg_iop_sw_cpu_r_mc_stat_offset 20 - -/* Register rw_bus0_clr_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte0___width 8 -#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte1___lsb 8 -#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte1___width 8 -#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte2___lsb 16 -#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte2___width 8 -#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte3___lsb 24 -#define reg_iop_sw_cpu_rw_bus0_clr_mask___byte3___width 8 -#define reg_iop_sw_cpu_rw_bus0_clr_mask_offset 24 - -/* Register rw_bus0_set_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus0_set_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus0_set_mask___byte0___width 8 -#define reg_iop_sw_cpu_rw_bus0_set_mask___byte1___lsb 8 -#define reg_iop_sw_cpu_rw_bus0_set_mask___byte1___width 8 -#define reg_iop_sw_cpu_rw_bus0_set_mask___byte2___lsb 16 -#define reg_iop_sw_cpu_rw_bus0_set_mask___byte2___width 8 -#define reg_iop_sw_cpu_rw_bus0_set_mask___byte3___lsb 24 -#define reg_iop_sw_cpu_rw_bus0_set_mask___byte3___width 8 -#define reg_iop_sw_cpu_rw_bus0_set_mask_offset 28 - -/* Register rw_bus0_oe_clr_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte0___width 1 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte0___bit 0 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte1___lsb 1 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte1___width 1 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte1___bit 1 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte2___lsb 2 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte2___width 1 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte2___bit 2 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte3___lsb 3 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte3___width 1 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask___byte3___bit 3 -#define reg_iop_sw_cpu_rw_bus0_oe_clr_mask_offset 32 - -/* Register rw_bus0_oe_set_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte0___width 1 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte0___bit 0 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte1___lsb 1 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte1___width 1 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte1___bit 1 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte2___lsb 2 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte2___width 1 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte2___bit 2 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte3___lsb 3 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte3___width 1 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask___byte3___bit 3 -#define reg_iop_sw_cpu_rw_bus0_oe_set_mask_offset 36 - -/* Register r_bus0_in, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_bus0_in_offset 40 - -/* Register rw_bus1_clr_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte0___width 8 -#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte1___lsb 8 -#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte1___width 8 -#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte2___lsb 16 -#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte2___width 8 -#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte3___lsb 24 -#define reg_iop_sw_cpu_rw_bus1_clr_mask___byte3___width 8 -#define reg_iop_sw_cpu_rw_bus1_clr_mask_offset 44 - -/* Register rw_bus1_set_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus1_set_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus1_set_mask___byte0___width 8 -#define reg_iop_sw_cpu_rw_bus1_set_mask___byte1___lsb 8 -#define reg_iop_sw_cpu_rw_bus1_set_mask___byte1___width 8 -#define reg_iop_sw_cpu_rw_bus1_set_mask___byte2___lsb 16 -#define reg_iop_sw_cpu_rw_bus1_set_mask___byte2___width 8 -#define reg_iop_sw_cpu_rw_bus1_set_mask___byte3___lsb 24 -#define reg_iop_sw_cpu_rw_bus1_set_mask___byte3___width 8 -#define reg_iop_sw_cpu_rw_bus1_set_mask_offset 48 - -/* Register rw_bus1_oe_clr_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte0___width 1 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte0___bit 0 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte1___lsb 1 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte1___width 1 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte1___bit 1 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte2___lsb 2 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte2___width 1 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte2___bit 2 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte3___lsb 3 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte3___width 1 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask___byte3___bit 3 -#define reg_iop_sw_cpu_rw_bus1_oe_clr_mask_offset 52 - -/* Register rw_bus1_oe_set_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte0___width 1 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte0___bit 0 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte1___lsb 1 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte1___width 1 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte1___bit 1 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte2___lsb 2 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte2___width 1 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte2___bit 2 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte3___lsb 3 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte3___width 1 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask___byte3___bit 3 -#define reg_iop_sw_cpu_rw_bus1_oe_set_mask_offset 56 - -/* Register r_bus1_in, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_bus1_in_offset 60 - -/* Register rw_gio_clr_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_gio_clr_mask___val___lsb 0 -#define reg_iop_sw_cpu_rw_gio_clr_mask___val___width 32 -#define reg_iop_sw_cpu_rw_gio_clr_mask_offset 64 - -/* Register rw_gio_set_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_gio_set_mask___val___lsb 0 -#define reg_iop_sw_cpu_rw_gio_set_mask___val___width 32 -#define reg_iop_sw_cpu_rw_gio_set_mask_offset 68 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_gio_oe_clr_mask___val___lsb 0 -#define reg_iop_sw_cpu_rw_gio_oe_clr_mask___val___width 32 -#define reg_iop_sw_cpu_rw_gio_oe_clr_mask_offset 72 - -/* Register rw_gio_oe_set_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_gio_oe_set_mask___val___lsb 0 -#define reg_iop_sw_cpu_rw_gio_oe_set_mask___val___width 32 -#define reg_iop_sw_cpu_rw_gio_oe_set_mask_offset 76 - -/* Register r_gio_in, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_gio_in_offset 80 - -/* Register rw_intr0_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___lsb 0 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___bit 0 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___lsb 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___bit 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___lsb 2 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___bit 2 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___lsb 3 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___bit 3 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___lsb 4 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___bit 4 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___lsb 5 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___bit 5 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___lsb 6 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___bit 6 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___lsb 7 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___bit 7 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___lsb 8 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___bit 8 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___lsb 9 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___bit 9 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___lsb 10 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___bit 10 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___lsb 11 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___bit 11 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___lsb 12 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___bit 12 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___lsb 13 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___bit 13 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___lsb 14 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___bit 14 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___lsb 15 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___bit 15 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_0___lsb 16 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_0___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_0___bit 16 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_1___lsb 17 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_1___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_1___bit 17 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_2___lsb 18 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_2___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_2___bit 18 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_3___lsb 19 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_3___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_3___bit 19 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_4___lsb 20 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_4___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_4___bit 20 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_5___lsb 21 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_5___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_5___bit 21 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_6___lsb 22 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_6___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_6___bit 22 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_7___lsb 23 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_7___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu0_7___bit 23 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_8___lsb 24 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_8___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_8___bit 24 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_9___lsb 25 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_9___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_9___bit 25 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_10___lsb 26 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_10___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_10___bit 26 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_11___lsb 27 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_11___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_11___bit 27 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_12___lsb 28 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_12___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_12___bit 28 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_13___lsb 29 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_13___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_13___bit 29 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_14___lsb 30 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_14___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_14___bit 30 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_15___lsb 31 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_15___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu1_15___bit 31 -#define reg_iop_sw_cpu_rw_intr0_mask_offset 84 - -/* Register rw_ack_intr0, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___lsb 0 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___bit 0 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___lsb 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___bit 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___lsb 2 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___bit 2 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___lsb 3 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___bit 3 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___lsb 4 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___bit 4 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___lsb 5 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___bit 5 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___lsb 6 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___bit 6 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___lsb 7 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___bit 7 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___lsb 8 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___bit 8 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___lsb 9 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___bit 9 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___lsb 10 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___bit 10 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___lsb 11 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___bit 11 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___lsb 12 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___bit 12 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___lsb 13 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___bit 13 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___lsb 14 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___bit 14 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___lsb 15 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___bit 15 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_0___lsb 16 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_0___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_0___bit 16 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_1___lsb 17 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_1___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_1___bit 17 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_2___lsb 18 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_2___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_2___bit 18 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_3___lsb 19 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_3___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_3___bit 19 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_4___lsb 20 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_4___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_4___bit 20 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_5___lsb 21 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_5___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_5___bit 21 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_6___lsb 22 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_6___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_6___bit 22 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_7___lsb 23 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_7___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu0_7___bit 23 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_8___lsb 24 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_8___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_8___bit 24 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_9___lsb 25 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_9___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_9___bit 25 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_10___lsb 26 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_10___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_10___bit 26 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_11___lsb 27 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_11___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_11___bit 27 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_12___lsb 28 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_12___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_12___bit 28 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_13___lsb 29 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_13___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_13___bit 29 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_14___lsb 30 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_14___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_14___bit 30 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_15___lsb 31 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_15___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu1_15___bit 31 -#define reg_iop_sw_cpu_rw_ack_intr0_offset 88 - -/* Register r_intr0, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_intr0___mpu_0___lsb 0 -#define reg_iop_sw_cpu_r_intr0___mpu_0___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_0___bit 0 -#define reg_iop_sw_cpu_r_intr0___mpu_1___lsb 1 -#define reg_iop_sw_cpu_r_intr0___mpu_1___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_1___bit 1 -#define reg_iop_sw_cpu_r_intr0___mpu_2___lsb 2 -#define reg_iop_sw_cpu_r_intr0___mpu_2___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_2___bit 2 -#define reg_iop_sw_cpu_r_intr0___mpu_3___lsb 3 -#define reg_iop_sw_cpu_r_intr0___mpu_3___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_3___bit 3 -#define reg_iop_sw_cpu_r_intr0___mpu_4___lsb 4 -#define reg_iop_sw_cpu_r_intr0___mpu_4___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_4___bit 4 -#define reg_iop_sw_cpu_r_intr0___mpu_5___lsb 5 -#define reg_iop_sw_cpu_r_intr0___mpu_5___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_5___bit 5 -#define reg_iop_sw_cpu_r_intr0___mpu_6___lsb 6 -#define reg_iop_sw_cpu_r_intr0___mpu_6___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_6___bit 6 -#define reg_iop_sw_cpu_r_intr0___mpu_7___lsb 7 -#define reg_iop_sw_cpu_r_intr0___mpu_7___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_7___bit 7 -#define reg_iop_sw_cpu_r_intr0___mpu_8___lsb 8 -#define reg_iop_sw_cpu_r_intr0___mpu_8___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_8___bit 8 -#define reg_iop_sw_cpu_r_intr0___mpu_9___lsb 9 -#define reg_iop_sw_cpu_r_intr0___mpu_9___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_9___bit 9 -#define reg_iop_sw_cpu_r_intr0___mpu_10___lsb 10 -#define reg_iop_sw_cpu_r_intr0___mpu_10___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_10___bit 10 -#define reg_iop_sw_cpu_r_intr0___mpu_11___lsb 11 -#define reg_iop_sw_cpu_r_intr0___mpu_11___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_11___bit 11 -#define reg_iop_sw_cpu_r_intr0___mpu_12___lsb 12 -#define reg_iop_sw_cpu_r_intr0___mpu_12___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_12___bit 12 -#define reg_iop_sw_cpu_r_intr0___mpu_13___lsb 13 -#define reg_iop_sw_cpu_r_intr0___mpu_13___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_13___bit 13 -#define reg_iop_sw_cpu_r_intr0___mpu_14___lsb 14 -#define reg_iop_sw_cpu_r_intr0___mpu_14___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_14___bit 14 -#define reg_iop_sw_cpu_r_intr0___mpu_15___lsb 15 -#define reg_iop_sw_cpu_r_intr0___mpu_15___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_15___bit 15 -#define reg_iop_sw_cpu_r_intr0___spu0_0___lsb 16 -#define reg_iop_sw_cpu_r_intr0___spu0_0___width 1 -#define reg_iop_sw_cpu_r_intr0___spu0_0___bit 16 -#define reg_iop_sw_cpu_r_intr0___spu0_1___lsb 17 -#define reg_iop_sw_cpu_r_intr0___spu0_1___width 1 -#define reg_iop_sw_cpu_r_intr0___spu0_1___bit 17 -#define reg_iop_sw_cpu_r_intr0___spu0_2___lsb 18 -#define reg_iop_sw_cpu_r_intr0___spu0_2___width 1 -#define reg_iop_sw_cpu_r_intr0___spu0_2___bit 18 -#define reg_iop_sw_cpu_r_intr0___spu0_3___lsb 19 -#define reg_iop_sw_cpu_r_intr0___spu0_3___width 1 -#define reg_iop_sw_cpu_r_intr0___spu0_3___bit 19 -#define reg_iop_sw_cpu_r_intr0___spu0_4___lsb 20 -#define reg_iop_sw_cpu_r_intr0___spu0_4___width 1 -#define reg_iop_sw_cpu_r_intr0___spu0_4___bit 20 -#define reg_iop_sw_cpu_r_intr0___spu0_5___lsb 21 -#define reg_iop_sw_cpu_r_intr0___spu0_5___width 1 -#define reg_iop_sw_cpu_r_intr0___spu0_5___bit 21 -#define reg_iop_sw_cpu_r_intr0___spu0_6___lsb 22 -#define reg_iop_sw_cpu_r_intr0___spu0_6___width 1 -#define reg_iop_sw_cpu_r_intr0___spu0_6___bit 22 -#define reg_iop_sw_cpu_r_intr0___spu0_7___lsb 23 -#define reg_iop_sw_cpu_r_intr0___spu0_7___width 1 -#define reg_iop_sw_cpu_r_intr0___spu0_7___bit 23 -#define reg_iop_sw_cpu_r_intr0___spu1_8___lsb 24 -#define reg_iop_sw_cpu_r_intr0___spu1_8___width 1 -#define reg_iop_sw_cpu_r_intr0___spu1_8___bit 24 -#define reg_iop_sw_cpu_r_intr0___spu1_9___lsb 25 -#define reg_iop_sw_cpu_r_intr0___spu1_9___width 1 -#define reg_iop_sw_cpu_r_intr0___spu1_9___bit 25 -#define reg_iop_sw_cpu_r_intr0___spu1_10___lsb 26 -#define reg_iop_sw_cpu_r_intr0___spu1_10___width 1 -#define reg_iop_sw_cpu_r_intr0___spu1_10___bit 26 -#define reg_iop_sw_cpu_r_intr0___spu1_11___lsb 27 -#define reg_iop_sw_cpu_r_intr0___spu1_11___width 1 -#define reg_iop_sw_cpu_r_intr0___spu1_11___bit 27 -#define reg_iop_sw_cpu_r_intr0___spu1_12___lsb 28 -#define reg_iop_sw_cpu_r_intr0___spu1_12___width 1 -#define reg_iop_sw_cpu_r_intr0___spu1_12___bit 28 -#define reg_iop_sw_cpu_r_intr0___spu1_13___lsb 29 -#define reg_iop_sw_cpu_r_intr0___spu1_13___width 1 -#define reg_iop_sw_cpu_r_intr0___spu1_13___bit 29 -#define reg_iop_sw_cpu_r_intr0___spu1_14___lsb 30 -#define reg_iop_sw_cpu_r_intr0___spu1_14___width 1 -#define reg_iop_sw_cpu_r_intr0___spu1_14___bit 30 -#define reg_iop_sw_cpu_r_intr0___spu1_15___lsb 31 -#define reg_iop_sw_cpu_r_intr0___spu1_15___width 1 -#define reg_iop_sw_cpu_r_intr0___spu1_15___bit 31 -#define reg_iop_sw_cpu_r_intr0_offset 92 - -/* Register r_masked_intr0, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___lsb 0 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___bit 0 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___lsb 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___bit 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___lsb 2 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___bit 2 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___lsb 3 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___bit 3 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___lsb 4 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___bit 4 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___lsb 5 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___bit 5 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___lsb 6 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___bit 6 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___lsb 7 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___bit 7 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___lsb 8 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___bit 8 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___lsb 9 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___bit 9 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___lsb 10 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___bit 10 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___lsb 11 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___bit 11 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___lsb 12 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___bit 12 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___lsb 13 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___bit 13 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___lsb 14 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___bit 14 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___lsb 15 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___bit 15 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_0___lsb 16 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_0___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_0___bit 16 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_1___lsb 17 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_1___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_1___bit 17 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_2___lsb 18 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_2___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_2___bit 18 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_3___lsb 19 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_3___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_3___bit 19 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_4___lsb 20 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_4___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_4___bit 20 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_5___lsb 21 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_5___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_5___bit 21 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_6___lsb 22 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_6___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_6___bit 22 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_7___lsb 23 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_7___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu0_7___bit 23 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_8___lsb 24 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_8___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_8___bit 24 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_9___lsb 25 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_9___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_9___bit 25 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_10___lsb 26 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_10___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_10___bit 26 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_11___lsb 27 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_11___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_11___bit 27 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_12___lsb 28 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_12___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_12___bit 28 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_13___lsb 29 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_13___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_13___bit 29 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_14___lsb 30 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_14___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_14___bit 30 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_15___lsb 31 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_15___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu1_15___bit 31 -#define reg_iop_sw_cpu_r_masked_intr0_offset 96 - -/* Register rw_intr1_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___lsb 0 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___bit 0 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___lsb 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___bit 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___lsb 2 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___bit 2 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___lsb 3 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___bit 3 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___lsb 4 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___bit 4 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___lsb 5 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___bit 5 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___lsb 6 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___bit 6 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___lsb 7 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___bit 7 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___lsb 8 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___bit 8 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___lsb 9 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___bit 9 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___lsb 10 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___bit 10 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___lsb 11 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___bit 11 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___lsb 12 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___bit 12 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___lsb 13 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___bit 13 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___lsb 14 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___bit 14 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___lsb 15 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___bit 15 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_8___lsb 16 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_8___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_8___bit 16 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_9___lsb 17 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_9___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_9___bit 17 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_10___lsb 18 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_10___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_10___bit 18 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_11___lsb 19 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_11___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_11___bit 19 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_12___lsb 20 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_12___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_12___bit 20 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_13___lsb 21 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_13___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_13___bit 21 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_14___lsb 22 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_14___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_14___bit 22 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_15___lsb 23 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_15___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu0_15___bit 23 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_0___lsb 24 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_0___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_0___bit 24 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_1___lsb 25 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_1___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_1___bit 25 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_2___lsb 26 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_2___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_2___bit 26 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_3___lsb 27 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_3___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_3___bit 27 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_4___lsb 28 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_4___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_4___bit 28 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_5___lsb 29 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_5___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_5___bit 29 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_6___lsb 30 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_6___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_6___bit 30 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_7___lsb 31 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_7___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___spu1_7___bit 31 -#define reg_iop_sw_cpu_rw_intr1_mask_offset 100 - -/* Register rw_ack_intr1, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___lsb 0 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___bit 0 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___lsb 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___bit 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___lsb 2 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___bit 2 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___lsb 3 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___bit 3 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___lsb 4 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___bit 4 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___lsb 5 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___bit 5 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___lsb 6 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___bit 6 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___lsb 7 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___bit 7 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___lsb 8 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___bit 8 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___lsb 9 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___bit 9 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___lsb 10 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___bit 10 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___lsb 11 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___bit 11 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___lsb 12 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___bit 12 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___lsb 13 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___bit 13 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___lsb 14 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___bit 14 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___lsb 15 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___bit 15 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_8___lsb 16 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_8___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_8___bit 16 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_9___lsb 17 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_9___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_9___bit 17 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_10___lsb 18 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_10___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_10___bit 18 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_11___lsb 19 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_11___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_11___bit 19 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_12___lsb 20 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_12___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_12___bit 20 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_13___lsb 21 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_13___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_13___bit 21 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_14___lsb 22 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_14___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_14___bit 22 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_15___lsb 23 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_15___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu0_15___bit 23 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_0___lsb 24 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_0___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_0___bit 24 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_1___lsb 25 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_1___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_1___bit 25 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_2___lsb 26 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_2___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_2___bit 26 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_3___lsb 27 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_3___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_3___bit 27 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_4___lsb 28 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_4___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_4___bit 28 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_5___lsb 29 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_5___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_5___bit 29 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_6___lsb 30 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_6___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_6___bit 30 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_7___lsb 31 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_7___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___spu1_7___bit 31 -#define reg_iop_sw_cpu_rw_ack_intr1_offset 104 - -/* Register r_intr1, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_intr1___mpu_16___lsb 0 -#define reg_iop_sw_cpu_r_intr1___mpu_16___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_16___bit 0 -#define reg_iop_sw_cpu_r_intr1___mpu_17___lsb 1 -#define reg_iop_sw_cpu_r_intr1___mpu_17___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_17___bit 1 -#define reg_iop_sw_cpu_r_intr1___mpu_18___lsb 2 -#define reg_iop_sw_cpu_r_intr1___mpu_18___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_18___bit 2 -#define reg_iop_sw_cpu_r_intr1___mpu_19___lsb 3 -#define reg_iop_sw_cpu_r_intr1___mpu_19___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_19___bit 3 -#define reg_iop_sw_cpu_r_intr1___mpu_20___lsb 4 -#define reg_iop_sw_cpu_r_intr1___mpu_20___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_20___bit 4 -#define reg_iop_sw_cpu_r_intr1___mpu_21___lsb 5 -#define reg_iop_sw_cpu_r_intr1___mpu_21___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_21___bit 5 -#define reg_iop_sw_cpu_r_intr1___mpu_22___lsb 6 -#define reg_iop_sw_cpu_r_intr1___mpu_22___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_22___bit 6 -#define reg_iop_sw_cpu_r_intr1___mpu_23___lsb 7 -#define reg_iop_sw_cpu_r_intr1___mpu_23___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_23___bit 7 -#define reg_iop_sw_cpu_r_intr1___mpu_24___lsb 8 -#define reg_iop_sw_cpu_r_intr1___mpu_24___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_24___bit 8 -#define reg_iop_sw_cpu_r_intr1___mpu_25___lsb 9 -#define reg_iop_sw_cpu_r_intr1___mpu_25___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_25___bit 9 -#define reg_iop_sw_cpu_r_intr1___mpu_26___lsb 10 -#define reg_iop_sw_cpu_r_intr1___mpu_26___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_26___bit 10 -#define reg_iop_sw_cpu_r_intr1___mpu_27___lsb 11 -#define reg_iop_sw_cpu_r_intr1___mpu_27___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_27___bit 11 -#define reg_iop_sw_cpu_r_intr1___mpu_28___lsb 12 -#define reg_iop_sw_cpu_r_intr1___mpu_28___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_28___bit 12 -#define reg_iop_sw_cpu_r_intr1___mpu_29___lsb 13 -#define reg_iop_sw_cpu_r_intr1___mpu_29___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_29___bit 13 -#define reg_iop_sw_cpu_r_intr1___mpu_30___lsb 14 -#define reg_iop_sw_cpu_r_intr1___mpu_30___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_30___bit 14 -#define reg_iop_sw_cpu_r_intr1___mpu_31___lsb 15 -#define reg_iop_sw_cpu_r_intr1___mpu_31___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_31___bit 15 -#define reg_iop_sw_cpu_r_intr1___spu0_8___lsb 16 -#define reg_iop_sw_cpu_r_intr1___spu0_8___width 1 -#define reg_iop_sw_cpu_r_intr1___spu0_8___bit 16 -#define reg_iop_sw_cpu_r_intr1___spu0_9___lsb 17 -#define reg_iop_sw_cpu_r_intr1___spu0_9___width 1 -#define reg_iop_sw_cpu_r_intr1___spu0_9___bit 17 -#define reg_iop_sw_cpu_r_intr1___spu0_10___lsb 18 -#define reg_iop_sw_cpu_r_intr1___spu0_10___width 1 -#define reg_iop_sw_cpu_r_intr1___spu0_10___bit 18 -#define reg_iop_sw_cpu_r_intr1___spu0_11___lsb 19 -#define reg_iop_sw_cpu_r_intr1___spu0_11___width 1 -#define reg_iop_sw_cpu_r_intr1___spu0_11___bit 19 -#define reg_iop_sw_cpu_r_intr1___spu0_12___lsb 20 -#define reg_iop_sw_cpu_r_intr1___spu0_12___width 1 -#define reg_iop_sw_cpu_r_intr1___spu0_12___bit 20 -#define reg_iop_sw_cpu_r_intr1___spu0_13___lsb 21 -#define reg_iop_sw_cpu_r_intr1___spu0_13___width 1 -#define reg_iop_sw_cpu_r_intr1___spu0_13___bit 21 -#define reg_iop_sw_cpu_r_intr1___spu0_14___lsb 22 -#define reg_iop_sw_cpu_r_intr1___spu0_14___width 1 -#define reg_iop_sw_cpu_r_intr1___spu0_14___bit 22 -#define reg_iop_sw_cpu_r_intr1___spu0_15___lsb 23 -#define reg_iop_sw_cpu_r_intr1___spu0_15___width 1 -#define reg_iop_sw_cpu_r_intr1___spu0_15___bit 23 -#define reg_iop_sw_cpu_r_intr1___spu1_0___lsb 24 -#define reg_iop_sw_cpu_r_intr1___spu1_0___width 1 -#define reg_iop_sw_cpu_r_intr1___spu1_0___bit 24 -#define reg_iop_sw_cpu_r_intr1___spu1_1___lsb 25 -#define reg_iop_sw_cpu_r_intr1___spu1_1___width 1 -#define reg_iop_sw_cpu_r_intr1___spu1_1___bit 25 -#define reg_iop_sw_cpu_r_intr1___spu1_2___lsb 26 -#define reg_iop_sw_cpu_r_intr1___spu1_2___width 1 -#define reg_iop_sw_cpu_r_intr1___spu1_2___bit 26 -#define reg_iop_sw_cpu_r_intr1___spu1_3___lsb 27 -#define reg_iop_sw_cpu_r_intr1___spu1_3___width 1 -#define reg_iop_sw_cpu_r_intr1___spu1_3___bit 27 -#define reg_iop_sw_cpu_r_intr1___spu1_4___lsb 28 -#define reg_iop_sw_cpu_r_intr1___spu1_4___width 1 -#define reg_iop_sw_cpu_r_intr1___spu1_4___bit 28 -#define reg_iop_sw_cpu_r_intr1___spu1_5___lsb 29 -#define reg_iop_sw_cpu_r_intr1___spu1_5___width 1 -#define reg_iop_sw_cpu_r_intr1___spu1_5___bit 29 -#define reg_iop_sw_cpu_r_intr1___spu1_6___lsb 30 -#define reg_iop_sw_cpu_r_intr1___spu1_6___width 1 -#define reg_iop_sw_cpu_r_intr1___spu1_6___bit 30 -#define reg_iop_sw_cpu_r_intr1___spu1_7___lsb 31 -#define reg_iop_sw_cpu_r_intr1___spu1_7___width 1 -#define reg_iop_sw_cpu_r_intr1___spu1_7___bit 31 -#define reg_iop_sw_cpu_r_intr1_offset 108 - -/* Register r_masked_intr1, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___lsb 0 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___bit 0 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___lsb 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___bit 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___lsb 2 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___bit 2 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___lsb 3 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___bit 3 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___lsb 4 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___bit 4 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___lsb 5 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___bit 5 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___lsb 6 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___bit 6 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___lsb 7 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___bit 7 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___lsb 8 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___bit 8 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___lsb 9 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___bit 9 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___lsb 10 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___bit 10 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___lsb 11 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___bit 11 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___lsb 12 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___bit 12 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___lsb 13 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___bit 13 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___lsb 14 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___bit 14 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___lsb 15 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___bit 15 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_8___lsb 16 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_8___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_8___bit 16 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_9___lsb 17 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_9___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_9___bit 17 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_10___lsb 18 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_10___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_10___bit 18 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_11___lsb 19 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_11___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_11___bit 19 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_12___lsb 20 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_12___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_12___bit 20 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_13___lsb 21 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_13___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_13___bit 21 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_14___lsb 22 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_14___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_14___bit 22 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_15___lsb 23 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_15___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu0_15___bit 23 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_0___lsb 24 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_0___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_0___bit 24 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_1___lsb 25 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_1___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_1___bit 25 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_2___lsb 26 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_2___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_2___bit 26 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_3___lsb 27 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_3___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_3___bit 27 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_4___lsb 28 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_4___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_4___bit 28 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_5___lsb 29 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_5___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_5___bit 29 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_6___lsb 30 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_6___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_6___bit 30 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_7___lsb 31 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_7___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___spu1_7___bit 31 -#define reg_iop_sw_cpu_r_masked_intr1_offset 112 - -/* Register rw_intr2_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_0___lsb 0 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_0___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_0___bit 0 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_1___lsb 1 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_1___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_1___bit 1 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_2___lsb 2 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_2___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_2___bit 2 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_3___lsb 3 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_3___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_3___bit 3 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_4___lsb 4 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_4___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_4___bit 4 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_5___lsb 5 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_5___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_5___bit 5 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_6___lsb 6 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_6___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_6___bit 6 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_7___lsb 7 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_7___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___mpu_7___bit 7 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_0___lsb 8 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_0___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_0___bit 8 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_1___lsb 9 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_1___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_1___bit 9 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_2___lsb 10 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_2___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_2___bit 10 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_3___lsb 11 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_3___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_3___bit 11 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_4___lsb 12 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_4___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_4___bit 12 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_5___lsb 13 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_5___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_5___bit 13 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_6___lsb 14 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_6___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_6___bit 14 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_7___lsb 15 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_7___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___spu0_7___bit 15 -#define reg_iop_sw_cpu_rw_intr2_mask___dmc_in0___lsb 16 -#define reg_iop_sw_cpu_rw_intr2_mask___dmc_in0___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___dmc_in0___bit 16 -#define reg_iop_sw_cpu_rw_intr2_mask___dmc_out0___lsb 17 -#define reg_iop_sw_cpu_rw_intr2_mask___dmc_out0___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___dmc_out0___bit 17 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0___lsb 18 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0___bit 18 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0___lsb 19 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0___bit 19 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0_extra___lsb 20 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0_extra___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_in0_extra___bit 20 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0_extra___lsb 21 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0_extra___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___fifo_out0_extra___bit 21 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp0___lsb 22 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp0___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp0___bit 22 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp1___lsb 23 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp1___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp1___bit 23 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp2___lsb 24 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp2___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp2___bit 24 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp3___lsb 25 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp3___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp3___bit 25 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp4___lsb 26 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp4___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp4___bit 26 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp5___lsb 27 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp5___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp5___bit 27 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp6___lsb 28 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp6___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp6___bit 28 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp7___lsb 29 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp7___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___trigger_grp7___bit 29 -#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp0___lsb 30 -#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp0___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp0___bit 30 -#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp1___lsb 31 -#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp1___width 1 -#define reg_iop_sw_cpu_rw_intr2_mask___timer_grp1___bit 31 -#define reg_iop_sw_cpu_rw_intr2_mask_offset 116 - -/* Register rw_ack_intr2, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_0___lsb 0 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_0___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_0___bit 0 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_1___lsb 1 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_1___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_1___bit 1 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_2___lsb 2 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_2___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_2___bit 2 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_3___lsb 3 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_3___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_3___bit 3 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_4___lsb 4 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_4___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_4___bit 4 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_5___lsb 5 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_5___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_5___bit 5 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_6___lsb 6 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_6___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_6___bit 6 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_7___lsb 7 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_7___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___mpu_7___bit 7 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_0___lsb 8 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_0___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_0___bit 8 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_1___lsb 9 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_1___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_1___bit 9 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_2___lsb 10 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_2___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_2___bit 10 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_3___lsb 11 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_3___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_3___bit 11 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_4___lsb 12 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_4___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_4___bit 12 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_5___lsb 13 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_5___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_5___bit 13 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_6___lsb 14 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_6___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_6___bit 14 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_7___lsb 15 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_7___width 1 -#define reg_iop_sw_cpu_rw_ack_intr2___spu0_7___bit 15 -#define reg_iop_sw_cpu_rw_ack_intr2_offset 120 - -/* Register r_intr2, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_intr2___mpu_0___lsb 0 -#define reg_iop_sw_cpu_r_intr2___mpu_0___width 1 -#define reg_iop_sw_cpu_r_intr2___mpu_0___bit 0 -#define reg_iop_sw_cpu_r_intr2___mpu_1___lsb 1 -#define reg_iop_sw_cpu_r_intr2___mpu_1___width 1 -#define reg_iop_sw_cpu_r_intr2___mpu_1___bit 1 -#define reg_iop_sw_cpu_r_intr2___mpu_2___lsb 2 -#define reg_iop_sw_cpu_r_intr2___mpu_2___width 1 -#define reg_iop_sw_cpu_r_intr2___mpu_2___bit 2 -#define reg_iop_sw_cpu_r_intr2___mpu_3___lsb 3 -#define reg_iop_sw_cpu_r_intr2___mpu_3___width 1 -#define reg_iop_sw_cpu_r_intr2___mpu_3___bit 3 -#define reg_iop_sw_cpu_r_intr2___mpu_4___lsb 4 -#define reg_iop_sw_cpu_r_intr2___mpu_4___width 1 -#define reg_iop_sw_cpu_r_intr2___mpu_4___bit 4 -#define reg_iop_sw_cpu_r_intr2___mpu_5___lsb 5 -#define reg_iop_sw_cpu_r_intr2___mpu_5___width 1 -#define reg_iop_sw_cpu_r_intr2___mpu_5___bit 5 -#define reg_iop_sw_cpu_r_intr2___mpu_6___lsb 6 -#define reg_iop_sw_cpu_r_intr2___mpu_6___width 1 -#define reg_iop_sw_cpu_r_intr2___mpu_6___bit 6 -#define reg_iop_sw_cpu_r_intr2___mpu_7___lsb 7 -#define reg_iop_sw_cpu_r_intr2___mpu_7___width 1 -#define reg_iop_sw_cpu_r_intr2___mpu_7___bit 7 -#define reg_iop_sw_cpu_r_intr2___spu0_0___lsb 8 -#define reg_iop_sw_cpu_r_intr2___spu0_0___width 1 -#define reg_iop_sw_cpu_r_intr2___spu0_0___bit 8 -#define reg_iop_sw_cpu_r_intr2___spu0_1___lsb 9 -#define reg_iop_sw_cpu_r_intr2___spu0_1___width 1 -#define reg_iop_sw_cpu_r_intr2___spu0_1___bit 9 -#define reg_iop_sw_cpu_r_intr2___spu0_2___lsb 10 -#define reg_iop_sw_cpu_r_intr2___spu0_2___width 1 -#define reg_iop_sw_cpu_r_intr2___spu0_2___bit 10 -#define reg_iop_sw_cpu_r_intr2___spu0_3___lsb 11 -#define reg_iop_sw_cpu_r_intr2___spu0_3___width 1 -#define reg_iop_sw_cpu_r_intr2___spu0_3___bit 11 -#define reg_iop_sw_cpu_r_intr2___spu0_4___lsb 12 -#define reg_iop_sw_cpu_r_intr2___spu0_4___width 1 -#define reg_iop_sw_cpu_r_intr2___spu0_4___bit 12 -#define reg_iop_sw_cpu_r_intr2___spu0_5___lsb 13 -#define reg_iop_sw_cpu_r_intr2___spu0_5___width 1 -#define reg_iop_sw_cpu_r_intr2___spu0_5___bit 13 -#define reg_iop_sw_cpu_r_intr2___spu0_6___lsb 14 -#define reg_iop_sw_cpu_r_intr2___spu0_6___width 1 -#define reg_iop_sw_cpu_r_intr2___spu0_6___bit 14 -#define reg_iop_sw_cpu_r_intr2___spu0_7___lsb 15 -#define reg_iop_sw_cpu_r_intr2___spu0_7___width 1 -#define reg_iop_sw_cpu_r_intr2___spu0_7___bit 15 -#define reg_iop_sw_cpu_r_intr2___dmc_in0___lsb 16 -#define reg_iop_sw_cpu_r_intr2___dmc_in0___width 1 -#define reg_iop_sw_cpu_r_intr2___dmc_in0___bit 16 -#define reg_iop_sw_cpu_r_intr2___dmc_out0___lsb 17 -#define reg_iop_sw_cpu_r_intr2___dmc_out0___width 1 -#define reg_iop_sw_cpu_r_intr2___dmc_out0___bit 17 -#define reg_iop_sw_cpu_r_intr2___fifo_in0___lsb 18 -#define reg_iop_sw_cpu_r_intr2___fifo_in0___width 1 -#define reg_iop_sw_cpu_r_intr2___fifo_in0___bit 18 -#define reg_iop_sw_cpu_r_intr2___fifo_out0___lsb 19 -#define reg_iop_sw_cpu_r_intr2___fifo_out0___width 1 -#define reg_iop_sw_cpu_r_intr2___fifo_out0___bit 19 -#define reg_iop_sw_cpu_r_intr2___fifo_in0_extra___lsb 20 -#define reg_iop_sw_cpu_r_intr2___fifo_in0_extra___width 1 -#define reg_iop_sw_cpu_r_intr2___fifo_in0_extra___bit 20 -#define reg_iop_sw_cpu_r_intr2___fifo_out0_extra___lsb 21 -#define reg_iop_sw_cpu_r_intr2___fifo_out0_extra___width 1 -#define reg_iop_sw_cpu_r_intr2___fifo_out0_extra___bit 21 -#define reg_iop_sw_cpu_r_intr2___trigger_grp0___lsb 22 -#define reg_iop_sw_cpu_r_intr2___trigger_grp0___width 1 -#define reg_iop_sw_cpu_r_intr2___trigger_grp0___bit 22 -#define reg_iop_sw_cpu_r_intr2___trigger_grp1___lsb 23 -#define reg_iop_sw_cpu_r_intr2___trigger_grp1___width 1 -#define reg_iop_sw_cpu_r_intr2___trigger_grp1___bit 23 -#define reg_iop_sw_cpu_r_intr2___trigger_grp2___lsb 24 -#define reg_iop_sw_cpu_r_intr2___trigger_grp2___width 1 -#define reg_iop_sw_cpu_r_intr2___trigger_grp2___bit 24 -#define reg_iop_sw_cpu_r_intr2___trigger_grp3___lsb 25 -#define reg_iop_sw_cpu_r_intr2___trigger_grp3___width 1 -#define reg_iop_sw_cpu_r_intr2___trigger_grp3___bit 25 -#define reg_iop_sw_cpu_r_intr2___trigger_grp4___lsb 26 -#define reg_iop_sw_cpu_r_intr2___trigger_grp4___width 1 -#define reg_iop_sw_cpu_r_intr2___trigger_grp4___bit 26 -#define reg_iop_sw_cpu_r_intr2___trigger_grp5___lsb 27 -#define reg_iop_sw_cpu_r_intr2___trigger_grp5___width 1 -#define reg_iop_sw_cpu_r_intr2___trigger_grp5___bit 27 -#define reg_iop_sw_cpu_r_intr2___trigger_grp6___lsb 28 -#define reg_iop_sw_cpu_r_intr2___trigger_grp6___width 1 -#define reg_iop_sw_cpu_r_intr2___trigger_grp6___bit 28 -#define reg_iop_sw_cpu_r_intr2___trigger_grp7___lsb 29 -#define reg_iop_sw_cpu_r_intr2___trigger_grp7___width 1 -#define reg_iop_sw_cpu_r_intr2___trigger_grp7___bit 29 -#define reg_iop_sw_cpu_r_intr2___timer_grp0___lsb 30 -#define reg_iop_sw_cpu_r_intr2___timer_grp0___width 1 -#define reg_iop_sw_cpu_r_intr2___timer_grp0___bit 30 -#define reg_iop_sw_cpu_r_intr2___timer_grp1___lsb 31 -#define reg_iop_sw_cpu_r_intr2___timer_grp1___width 1 -#define reg_iop_sw_cpu_r_intr2___timer_grp1___bit 31 -#define reg_iop_sw_cpu_r_intr2_offset 124 - -/* Register r_masked_intr2, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_masked_intr2___mpu_0___lsb 0 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_0___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_0___bit 0 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_1___lsb 1 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_1___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_1___bit 1 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_2___lsb 2 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_2___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_2___bit 2 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_3___lsb 3 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_3___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_3___bit 3 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_4___lsb 4 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_4___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_4___bit 4 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_5___lsb 5 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_5___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_5___bit 5 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_6___lsb 6 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_6___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_6___bit 6 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_7___lsb 7 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_7___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___mpu_7___bit 7 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_0___lsb 8 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_0___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_0___bit 8 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_1___lsb 9 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_1___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_1___bit 9 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_2___lsb 10 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_2___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_2___bit 10 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_3___lsb 11 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_3___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_3___bit 11 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_4___lsb 12 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_4___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_4___bit 12 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_5___lsb 13 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_5___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_5___bit 13 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_6___lsb 14 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_6___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_6___bit 14 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_7___lsb 15 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_7___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___spu0_7___bit 15 -#define reg_iop_sw_cpu_r_masked_intr2___dmc_in0___lsb 16 -#define reg_iop_sw_cpu_r_masked_intr2___dmc_in0___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___dmc_in0___bit 16 -#define reg_iop_sw_cpu_r_masked_intr2___dmc_out0___lsb 17 -#define reg_iop_sw_cpu_r_masked_intr2___dmc_out0___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___dmc_out0___bit 17 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0___lsb 18 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0___bit 18 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0___lsb 19 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0___bit 19 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0_extra___lsb 20 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0_extra___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_in0_extra___bit 20 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0_extra___lsb 21 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0_extra___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___fifo_out0_extra___bit 21 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp0___lsb 22 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp0___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp0___bit 22 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp1___lsb 23 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp1___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp1___bit 23 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp2___lsb 24 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp2___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp2___bit 24 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp3___lsb 25 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp3___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp3___bit 25 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp4___lsb 26 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp4___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp4___bit 26 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp5___lsb 27 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp5___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp5___bit 27 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp6___lsb 28 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp6___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp6___bit 28 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp7___lsb 29 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp7___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___trigger_grp7___bit 29 -#define reg_iop_sw_cpu_r_masked_intr2___timer_grp0___lsb 30 -#define reg_iop_sw_cpu_r_masked_intr2___timer_grp0___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___timer_grp0___bit 30 -#define reg_iop_sw_cpu_r_masked_intr2___timer_grp1___lsb 31 -#define reg_iop_sw_cpu_r_masked_intr2___timer_grp1___width 1 -#define reg_iop_sw_cpu_r_masked_intr2___timer_grp1___bit 31 -#define reg_iop_sw_cpu_r_masked_intr2_offset 128 - -/* Register rw_intr3_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_16___lsb 0 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_16___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_16___bit 0 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_17___lsb 1 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_17___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_17___bit 1 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_18___lsb 2 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_18___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_18___bit 2 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_19___lsb 3 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_19___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_19___bit 3 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_20___lsb 4 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_20___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_20___bit 4 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_21___lsb 5 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_21___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_21___bit 5 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_22___lsb 6 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_22___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_22___bit 6 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_23___lsb 7 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_23___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___mpu_23___bit 7 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_0___lsb 8 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_0___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_0___bit 8 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_1___lsb 9 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_1___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_1___bit 9 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_2___lsb 10 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_2___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_2___bit 10 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_3___lsb 11 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_3___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_3___bit 11 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_4___lsb 12 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_4___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_4___bit 12 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_5___lsb 13 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_5___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_5___bit 13 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_6___lsb 14 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_6___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_6___bit 14 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_7___lsb 15 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_7___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___spu1_7___bit 15 -#define reg_iop_sw_cpu_rw_intr3_mask___dmc_in1___lsb 16 -#define reg_iop_sw_cpu_rw_intr3_mask___dmc_in1___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___dmc_in1___bit 16 -#define reg_iop_sw_cpu_rw_intr3_mask___dmc_out1___lsb 17 -#define reg_iop_sw_cpu_rw_intr3_mask___dmc_out1___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___dmc_out1___bit 17 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1___lsb 18 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1___bit 18 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1___lsb 19 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1___bit 19 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1_extra___lsb 20 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1_extra___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_in1_extra___bit 20 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1_extra___lsb 21 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1_extra___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___fifo_out1_extra___bit 21 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp0___lsb 22 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp0___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp0___bit 22 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp1___lsb 23 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp1___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp1___bit 23 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp2___lsb 24 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp2___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp2___bit 24 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp3___lsb 25 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp3___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp3___bit 25 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp4___lsb 26 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp4___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp4___bit 26 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp5___lsb 27 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp5___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp5___bit 27 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp6___lsb 28 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp6___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp6___bit 28 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp7___lsb 29 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp7___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___trigger_grp7___bit 29 -#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp2___lsb 30 -#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp2___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp2___bit 30 -#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp3___lsb 31 -#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp3___width 1 -#define reg_iop_sw_cpu_rw_intr3_mask___timer_grp3___bit 31 -#define reg_iop_sw_cpu_rw_intr3_mask_offset 132 - -/* Register rw_ack_intr3, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_16___lsb 0 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_16___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_16___bit 0 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_17___lsb 1 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_17___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_17___bit 1 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_18___lsb 2 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_18___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_18___bit 2 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_19___lsb 3 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_19___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_19___bit 3 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_20___lsb 4 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_20___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_20___bit 4 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_21___lsb 5 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_21___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_21___bit 5 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_22___lsb 6 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_22___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_22___bit 6 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_23___lsb 7 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_23___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___mpu_23___bit 7 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_0___lsb 8 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_0___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_0___bit 8 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_1___lsb 9 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_1___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_1___bit 9 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_2___lsb 10 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_2___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_2___bit 10 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_3___lsb 11 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_3___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_3___bit 11 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_4___lsb 12 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_4___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_4___bit 12 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_5___lsb 13 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_5___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_5___bit 13 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_6___lsb 14 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_6___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_6___bit 14 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_7___lsb 15 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_7___width 1 -#define reg_iop_sw_cpu_rw_ack_intr3___spu1_7___bit 15 -#define reg_iop_sw_cpu_rw_ack_intr3_offset 136 - -/* Register r_intr3, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_intr3___mpu_16___lsb 0 -#define reg_iop_sw_cpu_r_intr3___mpu_16___width 1 -#define reg_iop_sw_cpu_r_intr3___mpu_16___bit 0 -#define reg_iop_sw_cpu_r_intr3___mpu_17___lsb 1 -#define reg_iop_sw_cpu_r_intr3___mpu_17___width 1 -#define reg_iop_sw_cpu_r_intr3___mpu_17___bit 1 -#define reg_iop_sw_cpu_r_intr3___mpu_18___lsb 2 -#define reg_iop_sw_cpu_r_intr3___mpu_18___width 1 -#define reg_iop_sw_cpu_r_intr3___mpu_18___bit 2 -#define reg_iop_sw_cpu_r_intr3___mpu_19___lsb 3 -#define reg_iop_sw_cpu_r_intr3___mpu_19___width 1 -#define reg_iop_sw_cpu_r_intr3___mpu_19___bit 3 -#define reg_iop_sw_cpu_r_intr3___mpu_20___lsb 4 -#define reg_iop_sw_cpu_r_intr3___mpu_20___width 1 -#define reg_iop_sw_cpu_r_intr3___mpu_20___bit 4 -#define reg_iop_sw_cpu_r_intr3___mpu_21___lsb 5 -#define reg_iop_sw_cpu_r_intr3___mpu_21___width 1 -#define reg_iop_sw_cpu_r_intr3___mpu_21___bit 5 -#define reg_iop_sw_cpu_r_intr3___mpu_22___lsb 6 -#define reg_iop_sw_cpu_r_intr3___mpu_22___width 1 -#define reg_iop_sw_cpu_r_intr3___mpu_22___bit 6 -#define reg_iop_sw_cpu_r_intr3___mpu_23___lsb 7 -#define reg_iop_sw_cpu_r_intr3___mpu_23___width 1 -#define reg_iop_sw_cpu_r_intr3___mpu_23___bit 7 -#define reg_iop_sw_cpu_r_intr3___spu1_0___lsb 8 -#define reg_iop_sw_cpu_r_intr3___spu1_0___width 1 -#define reg_iop_sw_cpu_r_intr3___spu1_0___bit 8 -#define reg_iop_sw_cpu_r_intr3___spu1_1___lsb 9 -#define reg_iop_sw_cpu_r_intr3___spu1_1___width 1 -#define reg_iop_sw_cpu_r_intr3___spu1_1___bit 9 -#define reg_iop_sw_cpu_r_intr3___spu1_2___lsb 10 -#define reg_iop_sw_cpu_r_intr3___spu1_2___width 1 -#define reg_iop_sw_cpu_r_intr3___spu1_2___bit 10 -#define reg_iop_sw_cpu_r_intr3___spu1_3___lsb 11 -#define reg_iop_sw_cpu_r_intr3___spu1_3___width 1 -#define reg_iop_sw_cpu_r_intr3___spu1_3___bit 11 -#define reg_iop_sw_cpu_r_intr3___spu1_4___lsb 12 -#define reg_iop_sw_cpu_r_intr3___spu1_4___width 1 -#define reg_iop_sw_cpu_r_intr3___spu1_4___bit 12 -#define reg_iop_sw_cpu_r_intr3___spu1_5___lsb 13 -#define reg_iop_sw_cpu_r_intr3___spu1_5___width 1 -#define reg_iop_sw_cpu_r_intr3___spu1_5___bit 13 -#define reg_iop_sw_cpu_r_intr3___spu1_6___lsb 14 -#define reg_iop_sw_cpu_r_intr3___spu1_6___width 1 -#define reg_iop_sw_cpu_r_intr3___spu1_6___bit 14 -#define reg_iop_sw_cpu_r_intr3___spu1_7___lsb 15 -#define reg_iop_sw_cpu_r_intr3___spu1_7___width 1 -#define reg_iop_sw_cpu_r_intr3___spu1_7___bit 15 -#define reg_iop_sw_cpu_r_intr3___dmc_in1___lsb 16 -#define reg_iop_sw_cpu_r_intr3___dmc_in1___width 1 -#define reg_iop_sw_cpu_r_intr3___dmc_in1___bit 16 -#define reg_iop_sw_cpu_r_intr3___dmc_out1___lsb 17 -#define reg_iop_sw_cpu_r_intr3___dmc_out1___width 1 -#define reg_iop_sw_cpu_r_intr3___dmc_out1___bit 17 -#define reg_iop_sw_cpu_r_intr3___fifo_in1___lsb 18 -#define reg_iop_sw_cpu_r_intr3___fifo_in1___width 1 -#define reg_iop_sw_cpu_r_intr3___fifo_in1___bit 18 -#define reg_iop_sw_cpu_r_intr3___fifo_out1___lsb 19 -#define reg_iop_sw_cpu_r_intr3___fifo_out1___width 1 -#define reg_iop_sw_cpu_r_intr3___fifo_out1___bit 19 -#define reg_iop_sw_cpu_r_intr3___fifo_in1_extra___lsb 20 -#define reg_iop_sw_cpu_r_intr3___fifo_in1_extra___width 1 -#define reg_iop_sw_cpu_r_intr3___fifo_in1_extra___bit 20 -#define reg_iop_sw_cpu_r_intr3___fifo_out1_extra___lsb 21 -#define reg_iop_sw_cpu_r_intr3___fifo_out1_extra___width 1 -#define reg_iop_sw_cpu_r_intr3___fifo_out1_extra___bit 21 -#define reg_iop_sw_cpu_r_intr3___trigger_grp0___lsb 22 -#define reg_iop_sw_cpu_r_intr3___trigger_grp0___width 1 -#define reg_iop_sw_cpu_r_intr3___trigger_grp0___bit 22 -#define reg_iop_sw_cpu_r_intr3___trigger_grp1___lsb 23 -#define reg_iop_sw_cpu_r_intr3___trigger_grp1___width 1 -#define reg_iop_sw_cpu_r_intr3___trigger_grp1___bit 23 -#define reg_iop_sw_cpu_r_intr3___trigger_grp2___lsb 24 -#define reg_iop_sw_cpu_r_intr3___trigger_grp2___width 1 -#define reg_iop_sw_cpu_r_intr3___trigger_grp2___bit 24 -#define reg_iop_sw_cpu_r_intr3___trigger_grp3___lsb 25 -#define reg_iop_sw_cpu_r_intr3___trigger_grp3___width 1 -#define reg_iop_sw_cpu_r_intr3___trigger_grp3___bit 25 -#define reg_iop_sw_cpu_r_intr3___trigger_grp4___lsb 26 -#define reg_iop_sw_cpu_r_intr3___trigger_grp4___width 1 -#define reg_iop_sw_cpu_r_intr3___trigger_grp4___bit 26 -#define reg_iop_sw_cpu_r_intr3___trigger_grp5___lsb 27 -#define reg_iop_sw_cpu_r_intr3___trigger_grp5___width 1 -#define reg_iop_sw_cpu_r_intr3___trigger_grp5___bit 27 -#define reg_iop_sw_cpu_r_intr3___trigger_grp6___lsb 28 -#define reg_iop_sw_cpu_r_intr3___trigger_grp6___width 1 -#define reg_iop_sw_cpu_r_intr3___trigger_grp6___bit 28 -#define reg_iop_sw_cpu_r_intr3___trigger_grp7___lsb 29 -#define reg_iop_sw_cpu_r_intr3___trigger_grp7___width 1 -#define reg_iop_sw_cpu_r_intr3___trigger_grp7___bit 29 -#define reg_iop_sw_cpu_r_intr3___timer_grp2___lsb 30 -#define reg_iop_sw_cpu_r_intr3___timer_grp2___width 1 -#define reg_iop_sw_cpu_r_intr3___timer_grp2___bit 30 -#define reg_iop_sw_cpu_r_intr3___timer_grp3___lsb 31 -#define reg_iop_sw_cpu_r_intr3___timer_grp3___width 1 -#define reg_iop_sw_cpu_r_intr3___timer_grp3___bit 31 -#define reg_iop_sw_cpu_r_intr3_offset 140 - -/* Register r_masked_intr3, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_masked_intr3___mpu_16___lsb 0 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_16___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_16___bit 0 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_17___lsb 1 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_17___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_17___bit 1 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_18___lsb 2 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_18___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_18___bit 2 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_19___lsb 3 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_19___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_19___bit 3 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_20___lsb 4 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_20___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_20___bit 4 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_21___lsb 5 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_21___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_21___bit 5 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_22___lsb 6 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_22___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_22___bit 6 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_23___lsb 7 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_23___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___mpu_23___bit 7 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_0___lsb 8 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_0___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_0___bit 8 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_1___lsb 9 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_1___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_1___bit 9 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_2___lsb 10 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_2___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_2___bit 10 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_3___lsb 11 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_3___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_3___bit 11 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_4___lsb 12 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_4___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_4___bit 12 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_5___lsb 13 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_5___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_5___bit 13 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_6___lsb 14 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_6___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_6___bit 14 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_7___lsb 15 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_7___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___spu1_7___bit 15 -#define reg_iop_sw_cpu_r_masked_intr3___dmc_in1___lsb 16 -#define reg_iop_sw_cpu_r_masked_intr3___dmc_in1___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___dmc_in1___bit 16 -#define reg_iop_sw_cpu_r_masked_intr3___dmc_out1___lsb 17 -#define reg_iop_sw_cpu_r_masked_intr3___dmc_out1___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___dmc_out1___bit 17 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1___lsb 18 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1___bit 18 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1___lsb 19 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1___bit 19 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1_extra___lsb 20 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1_extra___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_in1_extra___bit 20 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1_extra___lsb 21 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1_extra___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___fifo_out1_extra___bit 21 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp0___lsb 22 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp0___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp0___bit 22 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp1___lsb 23 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp1___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp1___bit 23 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp2___lsb 24 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp2___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp2___bit 24 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp3___lsb 25 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp3___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp3___bit 25 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp4___lsb 26 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp4___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp4___bit 26 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp5___lsb 27 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp5___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp5___bit 27 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp6___lsb 28 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp6___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp6___bit 28 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp7___lsb 29 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp7___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___trigger_grp7___bit 29 -#define reg_iop_sw_cpu_r_masked_intr3___timer_grp2___lsb 30 -#define reg_iop_sw_cpu_r_masked_intr3___timer_grp2___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___timer_grp2___bit 30 -#define reg_iop_sw_cpu_r_masked_intr3___timer_grp3___lsb 31 -#define reg_iop_sw_cpu_r_masked_intr3___timer_grp3___width 1 -#define reg_iop_sw_cpu_r_masked_intr3___timer_grp3___bit 31 -#define reg_iop_sw_cpu_r_masked_intr3_offset 144 - - -/* Constants */ -#define regk_iop_sw_cpu_copy 0x00000000 -#define regk_iop_sw_cpu_no 0x00000000 -#define regk_iop_sw_cpu_rd 0x00000002 -#define regk_iop_sw_cpu_reg_copy 0x00000001 -#define regk_iop_sw_cpu_rw_bus0_clr_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_bus0_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_bus0_oe_set_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_bus0_set_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_bus1_clr_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_bus1_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_bus1_oe_set_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_bus1_set_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_gio_clr_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_gio_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_gio_oe_set_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_gio_set_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_intr0_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_intr1_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_intr2_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_intr3_mask_default 0x00000000 -#define regk_iop_sw_cpu_wr 0x00000003 -#define regk_iop_sw_cpu_yes 0x00000001 -#endif /* __iop_sw_cpu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h deleted file mode 100644 index ee7dc0435b59..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h +++ /dev/null @@ -1,1776 +0,0 @@ -#ifndef __iop_sw_mpu_defs_asm_h -#define __iop_sw_mpu_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_mpu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r - * id: $Id: iop_sw_mpu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_sw_cfg_owner, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_sw_cfg_owner___cfg___lsb 0 -#define reg_iop_sw_mpu_rw_sw_cfg_owner___cfg___width 2 -#define reg_iop_sw_mpu_rw_sw_cfg_owner_offset 0 - -/* Register rw_mc_ctrl, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___lsb 0 -#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___width 1 -#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___bit 0 -#define reg_iop_sw_mpu_rw_mc_ctrl___cmd___lsb 1 -#define reg_iop_sw_mpu_rw_mc_ctrl___cmd___width 2 -#define reg_iop_sw_mpu_rw_mc_ctrl___size___lsb 3 -#define reg_iop_sw_mpu_rw_mc_ctrl___size___width 3 -#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu0_mem___lsb 6 -#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu0_mem___width 1 -#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu0_mem___bit 6 -#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu1_mem___lsb 7 -#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu1_mem___width 1 -#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu1_mem___bit 7 -#define reg_iop_sw_mpu_rw_mc_ctrl_offset 4 - -/* Register rw_mc_data, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_mc_data___val___lsb 0 -#define reg_iop_sw_mpu_rw_mc_data___val___width 32 -#define reg_iop_sw_mpu_rw_mc_data_offset 8 - -/* Register rw_mc_addr, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_mc_addr_offset 12 - -/* Register rs_mc_data, scope iop_sw_mpu, type rs */ -#define reg_iop_sw_mpu_rs_mc_data_offset 16 - -/* Register r_mc_data, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_mc_data_offset 20 - -/* Register r_mc_stat, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___lsb 0 -#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___width 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___bit 0 -#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___lsb 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___width 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___bit 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_spu0___lsb 2 -#define reg_iop_sw_mpu_r_mc_stat___busy_spu0___width 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_spu0___bit 2 -#define reg_iop_sw_mpu_r_mc_stat___busy_spu1___lsb 3 -#define reg_iop_sw_mpu_r_mc_stat___busy_spu1___width 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_spu1___bit 3 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___lsb 4 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___width 1 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___bit 4 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___lsb 5 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___width 1 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___bit 5 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu0___lsb 6 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu0___width 1 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu0___bit 6 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu1___lsb 7 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu1___width 1 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu1___bit 7 -#define reg_iop_sw_mpu_r_mc_stat_offset 24 - -/* Register rw_bus0_clr_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte0___width 8 -#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte1___lsb 8 -#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte1___width 8 -#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte2___lsb 16 -#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte2___width 8 -#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte3___lsb 24 -#define reg_iop_sw_mpu_rw_bus0_clr_mask___byte3___width 8 -#define reg_iop_sw_mpu_rw_bus0_clr_mask_offset 28 - -/* Register rw_bus0_set_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus0_set_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus0_set_mask___byte0___width 8 -#define reg_iop_sw_mpu_rw_bus0_set_mask___byte1___lsb 8 -#define reg_iop_sw_mpu_rw_bus0_set_mask___byte1___width 8 -#define reg_iop_sw_mpu_rw_bus0_set_mask___byte2___lsb 16 -#define reg_iop_sw_mpu_rw_bus0_set_mask___byte2___width 8 -#define reg_iop_sw_mpu_rw_bus0_set_mask___byte3___lsb 24 -#define reg_iop_sw_mpu_rw_bus0_set_mask___byte3___width 8 -#define reg_iop_sw_mpu_rw_bus0_set_mask_offset 32 - -/* Register rw_bus0_oe_clr_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte0___width 1 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte0___bit 0 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte1___lsb 1 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte1___width 1 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte1___bit 1 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte2___lsb 2 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte2___width 1 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte2___bit 2 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte3___lsb 3 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte3___width 1 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask___byte3___bit 3 -#define reg_iop_sw_mpu_rw_bus0_oe_clr_mask_offset 36 - -/* Register rw_bus0_oe_set_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte0___width 1 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte0___bit 0 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte1___lsb 1 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte1___width 1 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte1___bit 1 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte2___lsb 2 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte2___width 1 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte2___bit 2 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte3___lsb 3 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte3___width 1 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask___byte3___bit 3 -#define reg_iop_sw_mpu_rw_bus0_oe_set_mask_offset 40 - -/* Register r_bus0_in, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_bus0_in_offset 44 - -/* Register rw_bus1_clr_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte0___width 8 -#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte1___lsb 8 -#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte1___width 8 -#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte2___lsb 16 -#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte2___width 8 -#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte3___lsb 24 -#define reg_iop_sw_mpu_rw_bus1_clr_mask___byte3___width 8 -#define reg_iop_sw_mpu_rw_bus1_clr_mask_offset 48 - -/* Register rw_bus1_set_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus1_set_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus1_set_mask___byte0___width 8 -#define reg_iop_sw_mpu_rw_bus1_set_mask___byte1___lsb 8 -#define reg_iop_sw_mpu_rw_bus1_set_mask___byte1___width 8 -#define reg_iop_sw_mpu_rw_bus1_set_mask___byte2___lsb 16 -#define reg_iop_sw_mpu_rw_bus1_set_mask___byte2___width 8 -#define reg_iop_sw_mpu_rw_bus1_set_mask___byte3___lsb 24 -#define reg_iop_sw_mpu_rw_bus1_set_mask___byte3___width 8 -#define reg_iop_sw_mpu_rw_bus1_set_mask_offset 52 - -/* Register rw_bus1_oe_clr_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte0___width 1 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte0___bit 0 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte1___lsb 1 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte1___width 1 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte1___bit 1 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte2___lsb 2 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte2___width 1 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte2___bit 2 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte3___lsb 3 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte3___width 1 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask___byte3___bit 3 -#define reg_iop_sw_mpu_rw_bus1_oe_clr_mask_offset 56 - -/* Register rw_bus1_oe_set_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte0___width 1 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte0___bit 0 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte1___lsb 1 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte1___width 1 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte1___bit 1 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte2___lsb 2 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte2___width 1 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte2___bit 2 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte3___lsb 3 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte3___width 1 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask___byte3___bit 3 -#define reg_iop_sw_mpu_rw_bus1_oe_set_mask_offset 60 - -/* Register r_bus1_in, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_bus1_in_offset 64 - -/* Register rw_gio_clr_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_gio_clr_mask___val___lsb 0 -#define reg_iop_sw_mpu_rw_gio_clr_mask___val___width 32 -#define reg_iop_sw_mpu_rw_gio_clr_mask_offset 68 - -/* Register rw_gio_set_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_gio_set_mask___val___lsb 0 -#define reg_iop_sw_mpu_rw_gio_set_mask___val___width 32 -#define reg_iop_sw_mpu_rw_gio_set_mask_offset 72 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_gio_oe_clr_mask___val___lsb 0 -#define reg_iop_sw_mpu_rw_gio_oe_clr_mask___val___width 32 -#define reg_iop_sw_mpu_rw_gio_oe_clr_mask_offset 76 - -/* Register rw_gio_oe_set_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_gio_oe_set_mask___val___lsb 0 -#define reg_iop_sw_mpu_rw_gio_oe_set_mask___val___width 32 -#define reg_iop_sw_mpu_rw_gio_oe_set_mask_offset 80 - -/* Register r_gio_in, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_gio_in_offset 84 - -/* Register rw_cpu_intr, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_cpu_intr___intr0___lsb 0 -#define reg_iop_sw_mpu_rw_cpu_intr___intr0___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr0___bit 0 -#define reg_iop_sw_mpu_rw_cpu_intr___intr1___lsb 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr1___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr1___bit 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr2___lsb 2 -#define reg_iop_sw_mpu_rw_cpu_intr___intr2___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr2___bit 2 -#define reg_iop_sw_mpu_rw_cpu_intr___intr3___lsb 3 -#define reg_iop_sw_mpu_rw_cpu_intr___intr3___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr3___bit 3 -#define reg_iop_sw_mpu_rw_cpu_intr___intr4___lsb 4 -#define reg_iop_sw_mpu_rw_cpu_intr___intr4___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr4___bit 4 -#define reg_iop_sw_mpu_rw_cpu_intr___intr5___lsb 5 -#define reg_iop_sw_mpu_rw_cpu_intr___intr5___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr5___bit 5 -#define reg_iop_sw_mpu_rw_cpu_intr___intr6___lsb 6 -#define reg_iop_sw_mpu_rw_cpu_intr___intr6___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr6___bit 6 -#define reg_iop_sw_mpu_rw_cpu_intr___intr7___lsb 7 -#define reg_iop_sw_mpu_rw_cpu_intr___intr7___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr7___bit 7 -#define reg_iop_sw_mpu_rw_cpu_intr___intr8___lsb 8 -#define reg_iop_sw_mpu_rw_cpu_intr___intr8___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr8___bit 8 -#define reg_iop_sw_mpu_rw_cpu_intr___intr9___lsb 9 -#define reg_iop_sw_mpu_rw_cpu_intr___intr9___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr9___bit 9 -#define reg_iop_sw_mpu_rw_cpu_intr___intr10___lsb 10 -#define reg_iop_sw_mpu_rw_cpu_intr___intr10___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr10___bit 10 -#define reg_iop_sw_mpu_rw_cpu_intr___intr11___lsb 11 -#define reg_iop_sw_mpu_rw_cpu_intr___intr11___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr11___bit 11 -#define reg_iop_sw_mpu_rw_cpu_intr___intr12___lsb 12 -#define reg_iop_sw_mpu_rw_cpu_intr___intr12___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr12___bit 12 -#define reg_iop_sw_mpu_rw_cpu_intr___intr13___lsb 13 -#define reg_iop_sw_mpu_rw_cpu_intr___intr13___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr13___bit 13 -#define reg_iop_sw_mpu_rw_cpu_intr___intr14___lsb 14 -#define reg_iop_sw_mpu_rw_cpu_intr___intr14___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr14___bit 14 -#define reg_iop_sw_mpu_rw_cpu_intr___intr15___lsb 15 -#define reg_iop_sw_mpu_rw_cpu_intr___intr15___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr15___bit 15 -#define reg_iop_sw_mpu_rw_cpu_intr___intr16___lsb 16 -#define reg_iop_sw_mpu_rw_cpu_intr___intr16___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr16___bit 16 -#define reg_iop_sw_mpu_rw_cpu_intr___intr17___lsb 17 -#define reg_iop_sw_mpu_rw_cpu_intr___intr17___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr17___bit 17 -#define reg_iop_sw_mpu_rw_cpu_intr___intr18___lsb 18 -#define reg_iop_sw_mpu_rw_cpu_intr___intr18___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr18___bit 18 -#define reg_iop_sw_mpu_rw_cpu_intr___intr19___lsb 19 -#define reg_iop_sw_mpu_rw_cpu_intr___intr19___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr19___bit 19 -#define reg_iop_sw_mpu_rw_cpu_intr___intr20___lsb 20 -#define reg_iop_sw_mpu_rw_cpu_intr___intr20___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr20___bit 20 -#define reg_iop_sw_mpu_rw_cpu_intr___intr21___lsb 21 -#define reg_iop_sw_mpu_rw_cpu_intr___intr21___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr21___bit 21 -#define reg_iop_sw_mpu_rw_cpu_intr___intr22___lsb 22 -#define reg_iop_sw_mpu_rw_cpu_intr___intr22___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr22___bit 22 -#define reg_iop_sw_mpu_rw_cpu_intr___intr23___lsb 23 -#define reg_iop_sw_mpu_rw_cpu_intr___intr23___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr23___bit 23 -#define reg_iop_sw_mpu_rw_cpu_intr___intr24___lsb 24 -#define reg_iop_sw_mpu_rw_cpu_intr___intr24___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr24___bit 24 -#define reg_iop_sw_mpu_rw_cpu_intr___intr25___lsb 25 -#define reg_iop_sw_mpu_rw_cpu_intr___intr25___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr25___bit 25 -#define reg_iop_sw_mpu_rw_cpu_intr___intr26___lsb 26 -#define reg_iop_sw_mpu_rw_cpu_intr___intr26___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr26___bit 26 -#define reg_iop_sw_mpu_rw_cpu_intr___intr27___lsb 27 -#define reg_iop_sw_mpu_rw_cpu_intr___intr27___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr27___bit 27 -#define reg_iop_sw_mpu_rw_cpu_intr___intr28___lsb 28 -#define reg_iop_sw_mpu_rw_cpu_intr___intr28___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr28___bit 28 -#define reg_iop_sw_mpu_rw_cpu_intr___intr29___lsb 29 -#define reg_iop_sw_mpu_rw_cpu_intr___intr29___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr29___bit 29 -#define reg_iop_sw_mpu_rw_cpu_intr___intr30___lsb 30 -#define reg_iop_sw_mpu_rw_cpu_intr___intr30___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr30___bit 30 -#define reg_iop_sw_mpu_rw_cpu_intr___intr31___lsb 31 -#define reg_iop_sw_mpu_rw_cpu_intr___intr31___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr31___bit 31 -#define reg_iop_sw_mpu_rw_cpu_intr_offset 88 - -/* Register r_cpu_intr, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_cpu_intr___intr0___lsb 0 -#define reg_iop_sw_mpu_r_cpu_intr___intr0___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr0___bit 0 -#define reg_iop_sw_mpu_r_cpu_intr___intr1___lsb 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr1___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr1___bit 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr2___lsb 2 -#define reg_iop_sw_mpu_r_cpu_intr___intr2___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr2___bit 2 -#define reg_iop_sw_mpu_r_cpu_intr___intr3___lsb 3 -#define reg_iop_sw_mpu_r_cpu_intr___intr3___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr3___bit 3 -#define reg_iop_sw_mpu_r_cpu_intr___intr4___lsb 4 -#define reg_iop_sw_mpu_r_cpu_intr___intr4___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr4___bit 4 -#define reg_iop_sw_mpu_r_cpu_intr___intr5___lsb 5 -#define reg_iop_sw_mpu_r_cpu_intr___intr5___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr5___bit 5 -#define reg_iop_sw_mpu_r_cpu_intr___intr6___lsb 6 -#define reg_iop_sw_mpu_r_cpu_intr___intr6___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr6___bit 6 -#define reg_iop_sw_mpu_r_cpu_intr___intr7___lsb 7 -#define reg_iop_sw_mpu_r_cpu_intr___intr7___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr7___bit 7 -#define reg_iop_sw_mpu_r_cpu_intr___intr8___lsb 8 -#define reg_iop_sw_mpu_r_cpu_intr___intr8___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr8___bit 8 -#define reg_iop_sw_mpu_r_cpu_intr___intr9___lsb 9 -#define reg_iop_sw_mpu_r_cpu_intr___intr9___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr9___bit 9 -#define reg_iop_sw_mpu_r_cpu_intr___intr10___lsb 10 -#define reg_iop_sw_mpu_r_cpu_intr___intr10___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr10___bit 10 -#define reg_iop_sw_mpu_r_cpu_intr___intr11___lsb 11 -#define reg_iop_sw_mpu_r_cpu_intr___intr11___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr11___bit 11 -#define reg_iop_sw_mpu_r_cpu_intr___intr12___lsb 12 -#define reg_iop_sw_mpu_r_cpu_intr___intr12___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr12___bit 12 -#define reg_iop_sw_mpu_r_cpu_intr___intr13___lsb 13 -#define reg_iop_sw_mpu_r_cpu_intr___intr13___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr13___bit 13 -#define reg_iop_sw_mpu_r_cpu_intr___intr14___lsb 14 -#define reg_iop_sw_mpu_r_cpu_intr___intr14___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr14___bit 14 -#define reg_iop_sw_mpu_r_cpu_intr___intr15___lsb 15 -#define reg_iop_sw_mpu_r_cpu_intr___intr15___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr15___bit 15 -#define reg_iop_sw_mpu_r_cpu_intr___intr16___lsb 16 -#define reg_iop_sw_mpu_r_cpu_intr___intr16___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr16___bit 16 -#define reg_iop_sw_mpu_r_cpu_intr___intr17___lsb 17 -#define reg_iop_sw_mpu_r_cpu_intr___intr17___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr17___bit 17 -#define reg_iop_sw_mpu_r_cpu_intr___intr18___lsb 18 -#define reg_iop_sw_mpu_r_cpu_intr___intr18___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr18___bit 18 -#define reg_iop_sw_mpu_r_cpu_intr___intr19___lsb 19 -#define reg_iop_sw_mpu_r_cpu_intr___intr19___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr19___bit 19 -#define reg_iop_sw_mpu_r_cpu_intr___intr20___lsb 20 -#define reg_iop_sw_mpu_r_cpu_intr___intr20___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr20___bit 20 -#define reg_iop_sw_mpu_r_cpu_intr___intr21___lsb 21 -#define reg_iop_sw_mpu_r_cpu_intr___intr21___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr21___bit 21 -#define reg_iop_sw_mpu_r_cpu_intr___intr22___lsb 22 -#define reg_iop_sw_mpu_r_cpu_intr___intr22___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr22___bit 22 -#define reg_iop_sw_mpu_r_cpu_intr___intr23___lsb 23 -#define reg_iop_sw_mpu_r_cpu_intr___intr23___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr23___bit 23 -#define reg_iop_sw_mpu_r_cpu_intr___intr24___lsb 24 -#define reg_iop_sw_mpu_r_cpu_intr___intr24___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr24___bit 24 -#define reg_iop_sw_mpu_r_cpu_intr___intr25___lsb 25 -#define reg_iop_sw_mpu_r_cpu_intr___intr25___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr25___bit 25 -#define reg_iop_sw_mpu_r_cpu_intr___intr26___lsb 26 -#define reg_iop_sw_mpu_r_cpu_intr___intr26___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr26___bit 26 -#define reg_iop_sw_mpu_r_cpu_intr___intr27___lsb 27 -#define reg_iop_sw_mpu_r_cpu_intr___intr27___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr27___bit 27 -#define reg_iop_sw_mpu_r_cpu_intr___intr28___lsb 28 -#define reg_iop_sw_mpu_r_cpu_intr___intr28___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr28___bit 28 -#define reg_iop_sw_mpu_r_cpu_intr___intr29___lsb 29 -#define reg_iop_sw_mpu_r_cpu_intr___intr29___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr29___bit 29 -#define reg_iop_sw_mpu_r_cpu_intr___intr30___lsb 30 -#define reg_iop_sw_mpu_r_cpu_intr___intr30___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr30___bit 30 -#define reg_iop_sw_mpu_r_cpu_intr___intr31___lsb 31 -#define reg_iop_sw_mpu_r_cpu_intr___intr31___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr31___bit 31 -#define reg_iop_sw_mpu_r_cpu_intr_offset 92 - -/* Register rw_intr_grp0_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr0___lsb 0 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr0___bit 0 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr0___lsb 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr0___bit 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp4___lsb 3 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp4___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp4___bit 3 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___bit 4 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0___lsb 5 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0___bit 5 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0_extra___lsb 6 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out0_extra___bit 6 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out0___bit 7 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr1___lsb 8 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr1___bit 8 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr1___lsb 9 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr1___bit 9 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp5___lsb 11 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp5___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp5___bit 11 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___bit 12 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0___lsb 13 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0___bit 13 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0_extra___lsb 14 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in0_extra___bit 14 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in0___bit 15 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr2___lsb 16 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr2___bit 16 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr2___lsb 17 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr2___bit 17 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp6___lsb 19 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp6___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp6___bit 19 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp2___bit 20 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1___lsb 21 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1___bit 21 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1_extra___lsb 22 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out1_extra___bit 22 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out1___bit 23 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr3___lsb 24 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu0_intr3___bit 24 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr3___lsb 25 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu1_intr3___bit 25 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp7___lsb 27 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp7___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp7___bit 27 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp3___bit 28 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1___lsb 29 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1___bit 29 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1_extra___lsb 30 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in1_extra___bit 30 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in1___bit 31 -#define reg_iop_sw_mpu_rw_intr_grp0_mask_offset 96 - -/* Register rw_ack_intr_grp0, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr0___lsb 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr0___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr0___bit 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr0___lsb 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr0___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr0___bit 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr1___lsb 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr1___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr1___bit 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr1___lsb 9 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr1___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr1___bit 9 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr2___lsb 16 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr2___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr2___bit 16 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr2___lsb 17 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr2___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr2___bit 17 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr3___lsb 24 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr3___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu0_intr3___bit 24 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr3___lsb 25 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr3___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu1_intr3___bit 25 -#define reg_iop_sw_mpu_rw_ack_intr_grp0_offset 100 - -/* Register r_intr_grp0, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr0___lsb 0 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr0___bit 0 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr0___lsb 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr0___bit 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp4___lsb 3 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp4___bit 3 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___bit 4 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0___lsb 5 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0___bit 5 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0_extra___lsb 6 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out0_extra___bit 6 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_out0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_out0___bit 7 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr1___lsb 8 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr1___bit 8 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr1___lsb 9 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr1___bit 9 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp5___lsb 11 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp5___bit 11 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___bit 12 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0___lsb 13 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0___bit 13 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0_extra___lsb 14 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in0_extra___bit 14 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_in0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_in0___bit 15 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr2___lsb 16 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr2___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr2___bit 16 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr2___lsb 17 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr2___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr2___bit 17 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp6___lsb 19 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp6___bit 19 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp2___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp2___bit 20 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1___lsb 21 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1___bit 21 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1_extra___lsb 22 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out1_extra___bit 22 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_out1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_out1___bit 23 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr3___lsb 24 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr3___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu0_intr3___bit 24 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr3___lsb 25 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr3___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu1_intr3___bit 25 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp7___lsb 27 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp7___bit 27 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp3___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp3___bit 28 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1___lsb 29 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1___bit 29 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1_extra___lsb 30 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in1_extra___bit 30 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_in1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_in1___bit 31 -#define reg_iop_sw_mpu_r_intr_grp0_offset 104 - -/* Register r_masked_intr_grp0, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr0___lsb 0 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr0___bit 0 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr0___lsb 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr0___bit 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp4___lsb 3 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp4___bit 3 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___bit 4 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0___lsb 5 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0___bit 5 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0_extra___lsb 6 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out0_extra___bit 6 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out0___bit 7 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr1___lsb 8 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr1___bit 8 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr1___lsb 9 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr1___bit 9 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp5___lsb 11 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp5___bit 11 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___bit 12 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0___lsb 13 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0___bit 13 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0_extra___lsb 14 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in0_extra___bit 14 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in0___bit 15 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr2___lsb 16 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr2___bit 16 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr2___lsb 17 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr2___bit 17 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp6___lsb 19 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp6___bit 19 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp2___bit 20 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1___lsb 21 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1___bit 21 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1_extra___lsb 22 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out1_extra___bit 22 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out1___bit 23 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr3___lsb 24 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu0_intr3___bit 24 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr3___lsb 25 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu1_intr3___bit 25 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp7___lsb 27 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp7___bit 27 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp3___bit 28 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1___lsb 29 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1___bit 29 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1_extra___lsb 30 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in1_extra___bit 30 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in1___bit 31 -#define reg_iop_sw_mpu_r_masked_intr_grp0_offset 108 - -/* Register rw_intr_grp1_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr4___lsb 0 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr4___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr4___bit 0 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr4___lsb 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr4___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr4___bit 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___lsb 3 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___bit 3 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___bit 4 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0___lsb 5 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0___bit 5 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0_extra___lsb 6 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in0_extra___bit 6 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out0___bit 7 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr5___lsb 8 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr5___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr5___bit 8 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr5___lsb 9 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr5___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr5___bit 9 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___lsb 11 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___bit 11 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___bit 12 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1___lsb 13 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1___bit 13 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0_extra___lsb 14 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0_extra___bit 14 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in0___bit 15 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr6___lsb 16 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr6___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr6___bit 16 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr6___lsb 17 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr6___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr6___bit 17 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___lsb 19 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___bit 19 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp2___bit 20 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1___lsb 21 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1___bit 21 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1_extra___lsb 22 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in1_extra___bit 22 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out1___bit 23 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr7___lsb 24 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr7___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu0_intr7___bit 24 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr7___lsb 25 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr7___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu1_intr7___bit 25 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___lsb 27 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___bit 27 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp3___bit 28 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0___lsb 29 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out0___bit 29 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1_extra___lsb 30 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out1_extra___bit 30 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in1___bit 31 -#define reg_iop_sw_mpu_rw_intr_grp1_mask_offset 112 - -/* Register rw_ack_intr_grp1, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr4___lsb 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr4___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr4___bit 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr4___lsb 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr4___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr4___bit 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr5___lsb 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr5___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr5___bit 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr5___lsb 9 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr5___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr5___bit 9 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr6___lsb 16 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr6___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr6___bit 16 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr6___lsb 17 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr6___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr6___bit 17 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr7___lsb 24 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr7___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu0_intr7___bit 24 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr7___lsb 25 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr7___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu1_intr7___bit 25 -#define reg_iop_sw_mpu_rw_ack_intr_grp1_offset 116 - -/* Register r_intr_grp1, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr4___lsb 0 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr4___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr4___bit 0 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr4___lsb 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr4___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr4___bit 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___lsb 3 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___bit 3 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___bit 4 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0___lsb 5 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0___bit 5 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0_extra___lsb 6 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in0_extra___bit 6 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_out0___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_out0___bit 7 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr5___lsb 8 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr5___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr5___bit 8 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr5___lsb 9 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr5___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr5___bit 9 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___lsb 11 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___bit 11 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___bit 12 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1___lsb 13 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1___bit 13 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0_extra___lsb 14 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0_extra___bit 14 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_in0___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_in0___bit 15 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr6___lsb 16 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr6___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr6___bit 16 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr6___lsb 17 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr6___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr6___bit 17 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___lsb 19 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___bit 19 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp2___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp2___bit 20 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1___lsb 21 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1___bit 21 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1_extra___lsb 22 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in1_extra___bit 22 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_out1___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_out1___bit 23 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr7___lsb 24 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr7___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu0_intr7___bit 24 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr7___lsb 25 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr7___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu1_intr7___bit 25 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___lsb 27 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___bit 27 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp3___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp3___bit 28 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0___lsb 29 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out0___bit 29 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1_extra___lsb 30 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out1_extra___bit 30 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_in1___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_in1___bit 31 -#define reg_iop_sw_mpu_r_intr_grp1_offset 120 - -/* Register r_masked_intr_grp1, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr4___lsb 0 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr4___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr4___bit 0 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr4___lsb 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr4___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr4___bit 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___lsb 3 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___bit 3 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___bit 4 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0___lsb 5 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0___bit 5 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0_extra___lsb 6 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in0_extra___bit 6 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out0___bit 7 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr5___lsb 8 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr5___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr5___bit 8 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr5___lsb 9 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr5___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr5___bit 9 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___lsb 11 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___bit 11 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___bit 12 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1___lsb 13 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1___bit 13 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0_extra___lsb 14 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0_extra___bit 14 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in0___bit 15 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr6___lsb 16 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr6___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr6___bit 16 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr6___lsb 17 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr6___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr6___bit 17 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___lsb 19 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___bit 19 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp2___bit 20 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1___lsb 21 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1___bit 21 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1_extra___lsb 22 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in1_extra___bit 22 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out1___bit 23 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr7___lsb 24 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr7___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu0_intr7___bit 24 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr7___lsb 25 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr7___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu1_intr7___bit 25 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___lsb 27 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___bit 27 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp3___bit 28 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0___lsb 29 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out0___bit 29 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1_extra___lsb 30 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out1_extra___bit 30 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in1___bit 31 -#define reg_iop_sw_mpu_r_masked_intr_grp1_offset 124 - -/* Register rw_intr_grp2_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr8___lsb 0 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr8___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr8___bit 0 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr8___lsb 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr8___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr8___bit 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp6___lsb 3 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp6___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp6___bit 3 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___bit 4 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1___lsb 5 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1___bit 5 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1_extra___lsb 6 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out1_extra___bit 6 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out0___bit 7 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr9___lsb 8 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr9___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr9___bit 8 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr9___lsb 9 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr9___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr9___bit 9 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp7___lsb 11 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp7___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp7___bit 11 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___bit 12 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1___lsb 13 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1___bit 13 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1_extra___lsb 14 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in1_extra___bit 14 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in0___bit 15 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr10___lsb 16 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr10___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr10___bit 16 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr10___lsb 17 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr10___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr10___bit 17 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp4___lsb 19 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp4___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp4___bit 19 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp2___bit 20 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0___lsb 21 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0___bit 21 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0_extra___lsb 22 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out0_extra___bit 22 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out1___bit 23 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr11___lsb 24 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr11___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu0_intr11___bit 24 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr11___lsb 25 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr11___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu1_intr11___bit 25 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp5___lsb 27 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp5___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp5___bit 27 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp3___bit 28 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0___lsb 29 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0___bit 29 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0_extra___lsb 30 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in0_extra___bit 30 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in1___bit 31 -#define reg_iop_sw_mpu_rw_intr_grp2_mask_offset 128 - -/* Register rw_ack_intr_grp2, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr8___lsb 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr8___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr8___bit 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr8___lsb 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr8___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr8___bit 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr9___lsb 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr9___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr9___bit 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr9___lsb 9 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr9___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr9___bit 9 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr10___lsb 16 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr10___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr10___bit 16 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr10___lsb 17 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr10___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr10___bit 17 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr11___lsb 24 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr11___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu0_intr11___bit 24 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr11___lsb 25 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr11___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu1_intr11___bit 25 -#define reg_iop_sw_mpu_rw_ack_intr_grp2_offset 132 - -/* Register r_intr_grp2, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr8___lsb 0 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr8___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr8___bit 0 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr8___lsb 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr8___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr8___bit 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp6___lsb 3 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp6___bit 3 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___bit 4 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1___lsb 5 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1___bit 5 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1_extra___lsb 6 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out1_extra___bit 6 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_out0___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_out0___bit 7 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr9___lsb 8 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr9___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr9___bit 8 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr9___lsb 9 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr9___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr9___bit 9 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp7___lsb 11 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp7___bit 11 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___bit 12 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1___lsb 13 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1___bit 13 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1_extra___lsb 14 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in1_extra___bit 14 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_in0___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_in0___bit 15 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr10___lsb 16 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr10___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr10___bit 16 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr10___lsb 17 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr10___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr10___bit 17 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp4___lsb 19 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp4___bit 19 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp2___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp2___bit 20 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0___lsb 21 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0___bit 21 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0_extra___lsb 22 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out0_extra___bit 22 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_out1___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_out1___bit 23 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr11___lsb 24 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr11___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu0_intr11___bit 24 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr11___lsb 25 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr11___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu1_intr11___bit 25 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp5___lsb 27 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp5___bit 27 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp3___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp3___bit 28 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0___lsb 29 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0___bit 29 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0_extra___lsb 30 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in0_extra___bit 30 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_in1___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_in1___bit 31 -#define reg_iop_sw_mpu_r_intr_grp2_offset 136 - -/* Register r_masked_intr_grp2, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr8___lsb 0 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr8___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr8___bit 0 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr8___lsb 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr8___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr8___bit 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp6___lsb 3 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp6___bit 3 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___bit 4 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1___lsb 5 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1___bit 5 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1_extra___lsb 6 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out1_extra___bit 6 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out0___bit 7 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr9___lsb 8 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr9___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr9___bit 8 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr9___lsb 9 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr9___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr9___bit 9 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp7___lsb 11 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp7___bit 11 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___bit 12 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1___lsb 13 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1___bit 13 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1_extra___lsb 14 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in1_extra___bit 14 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in0___bit 15 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr10___lsb 16 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr10___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr10___bit 16 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr10___lsb 17 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr10___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr10___bit 17 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp4___lsb 19 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp4___bit 19 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp2___bit 20 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0___lsb 21 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0___bit 21 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0_extra___lsb 22 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out0_extra___bit 22 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out1___bit 23 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr11___lsb 24 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr11___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu0_intr11___bit 24 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr11___lsb 25 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr11___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu1_intr11___bit 25 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp5___lsb 27 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp5___bit 27 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp3___bit 28 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0___lsb 29 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0___bit 29 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0_extra___lsb 30 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in0_extra___bit 30 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in1___bit 31 -#define reg_iop_sw_mpu_r_masked_intr_grp2_offset 140 - -/* Register rw_intr_grp3_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr12___lsb 0 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr12___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr12___bit 0 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr12___lsb 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr12___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr12___bit 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___lsb 3 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___bit 3 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___bit 4 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1___lsb 5 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1___bit 5 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1_extra___lsb 6 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in1_extra___bit 6 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out0___bit 7 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr13___lsb 8 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr13___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr13___bit 8 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr13___lsb 9 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr13___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr13___bit 9 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___lsb 11 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___bit 11 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___bit 12 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0___lsb 13 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0___bit 13 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0_extra___lsb 14 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out0_extra___bit 14 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in0___bit 15 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr14___lsb 16 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr14___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr14___bit 16 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr14___lsb 17 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr14___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr14___bit 17 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___lsb 19 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___bit 19 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp2___bit 20 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0___lsb 21 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0___bit 21 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0_extra___lsb 22 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in0_extra___bit 22 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out1___bit 23 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr15___lsb 24 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr15___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu0_intr15___bit 24 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr15___lsb 25 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr15___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu1_intr15___bit 25 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___lsb 27 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___bit 27 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp3___bit 28 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1___lsb 29 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1___bit 29 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1_extra___lsb 30 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out1_extra___bit 30 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in1___bit 31 -#define reg_iop_sw_mpu_rw_intr_grp3_mask_offset 144 - -/* Register rw_ack_intr_grp3, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr12___lsb 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr12___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr12___bit 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr12___lsb 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr12___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr12___bit 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr13___lsb 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr13___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr13___bit 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr13___lsb 9 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr13___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr13___bit 9 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr14___lsb 16 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr14___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr14___bit 16 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr14___lsb 17 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr14___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr14___bit 17 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr15___lsb 24 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr15___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu0_intr15___bit 24 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr15___lsb 25 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr15___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu1_intr15___bit 25 -#define reg_iop_sw_mpu_rw_ack_intr_grp3_offset 148 - -/* Register r_intr_grp3, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr12___lsb 0 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr12___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr12___bit 0 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr12___lsb 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr12___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr12___bit 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___lsb 3 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___bit 3 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___bit 4 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1___lsb 5 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1___bit 5 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1_extra___lsb 6 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in1_extra___bit 6 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_out0___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_out0___bit 7 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr13___lsb 8 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr13___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr13___bit 8 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr13___lsb 9 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr13___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr13___bit 9 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___lsb 11 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___bit 11 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___bit 12 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0___lsb 13 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0___bit 13 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0_extra___lsb 14 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out0_extra___bit 14 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_in0___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_in0___bit 15 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr14___lsb 16 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr14___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr14___bit 16 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr14___lsb 17 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr14___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr14___bit 17 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___lsb 19 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___bit 19 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp2___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp2___bit 20 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0___lsb 21 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0___bit 21 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0_extra___lsb 22 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in0_extra___bit 22 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_out1___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_out1___bit 23 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr15___lsb 24 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr15___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu0_intr15___bit 24 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr15___lsb 25 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr15___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu1_intr15___bit 25 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___lsb 27 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___bit 27 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp3___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp3___bit 28 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1___lsb 29 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1___bit 29 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1_extra___lsb 30 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out1_extra___bit 30 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_in1___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_in1___bit 31 -#define reg_iop_sw_mpu_r_intr_grp3_offset 152 - -/* Register r_masked_intr_grp3, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr12___lsb 0 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr12___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr12___bit 0 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr12___lsb 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr12___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr12___bit 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp0___lsb 2 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp0___bit 2 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___lsb 3 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___bit 3 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___lsb 4 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___bit 4 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1___lsb 5 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1___bit 5 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1_extra___lsb 6 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in1_extra___bit 6 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out0___lsb 7 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out0___bit 7 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr13___lsb 8 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr13___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr13___bit 8 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr13___lsb 9 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr13___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr13___bit 9 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp1___lsb 10 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp1___bit 10 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___lsb 11 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___bit 11 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___lsb 12 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___bit 12 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0___lsb 13 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0___bit 13 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0_extra___lsb 14 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out0_extra___bit 14 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in0___lsb 15 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in0___bit 15 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr14___lsb 16 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr14___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr14___bit 16 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr14___lsb 17 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr14___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr14___bit 17 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp2___lsb 18 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp2___bit 18 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___lsb 19 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___bit 19 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp2___lsb 20 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp2___bit 20 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0___lsb 21 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0___bit 21 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0_extra___lsb 22 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in0_extra___bit 22 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out1___lsb 23 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out1___bit 23 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr15___lsb 24 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr15___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu0_intr15___bit 24 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr15___lsb 25 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr15___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu1_intr15___bit 25 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp3___lsb 26 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp3___bit 26 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___lsb 27 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___bit 27 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp3___lsb 28 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp3___bit 28 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1___lsb 29 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1___bit 29 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1_extra___lsb 30 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out1_extra___bit 30 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in1___lsb 31 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in1___bit 31 -#define reg_iop_sw_mpu_r_masked_intr_grp3_offset 156 - - -/* Constants */ -#define regk_iop_sw_mpu_copy 0x00000000 -#define regk_iop_sw_mpu_cpu 0x00000000 -#define regk_iop_sw_mpu_mpu 0x00000001 -#define regk_iop_sw_mpu_no 0x00000000 -#define regk_iop_sw_mpu_nop 0x00000000 -#define regk_iop_sw_mpu_rd 0x00000002 -#define regk_iop_sw_mpu_reg_copy 0x00000001 -#define regk_iop_sw_mpu_rw_bus0_clr_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_bus0_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_bus0_oe_set_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_bus0_set_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_bus1_clr_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_bus1_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_bus1_oe_set_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_bus1_set_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_gio_clr_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_gio_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_gio_oe_set_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_gio_set_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_intr_grp0_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_intr_grp1_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_intr_grp2_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_intr_grp3_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_sw_cfg_owner_default 0x00000000 -#define regk_iop_sw_mpu_set 0x00000001 -#define regk_iop_sw_mpu_spu0 0x00000002 -#define regk_iop_sw_mpu_spu1 0x00000003 -#define regk_iop_sw_mpu_wr 0x00000003 -#define regk_iop_sw_mpu_yes 0x00000001 -#endif /* __iop_sw_mpu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h deleted file mode 100644 index 0929f144cfa1..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h +++ /dev/null @@ -1,691 +0,0 @@ -#ifndef __iop_sw_spu_defs_asm_h -#define __iop_sw_spu_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_sw_spu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_spu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_spu.r - * id: $Id: iop_sw_spu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_mc_ctrl, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___lsb 0 -#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___width 1 -#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___bit 0 -#define reg_iop_sw_spu_rw_mc_ctrl___cmd___lsb 1 -#define reg_iop_sw_spu_rw_mc_ctrl___cmd___width 2 -#define reg_iop_sw_spu_rw_mc_ctrl___size___lsb 3 -#define reg_iop_sw_spu_rw_mc_ctrl___size___width 3 -#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu0_mem___lsb 6 -#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu0_mem___width 1 -#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu0_mem___bit 6 -#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu1_mem___lsb 7 -#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu1_mem___width 1 -#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu1_mem___bit 7 -#define reg_iop_sw_spu_rw_mc_ctrl_offset 0 - -/* Register rw_mc_data, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_mc_data___val___lsb 0 -#define reg_iop_sw_spu_rw_mc_data___val___width 32 -#define reg_iop_sw_spu_rw_mc_data_offset 4 - -/* Register rw_mc_addr, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_mc_addr_offset 8 - -/* Register rs_mc_data, scope iop_sw_spu, type rs */ -#define reg_iop_sw_spu_rs_mc_data_offset 12 - -/* Register r_mc_data, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_mc_data_offset 16 - -/* Register r_mc_stat, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_mc_stat___busy_cpu___lsb 0 -#define reg_iop_sw_spu_r_mc_stat___busy_cpu___width 1 -#define reg_iop_sw_spu_r_mc_stat___busy_cpu___bit 0 -#define reg_iop_sw_spu_r_mc_stat___busy_mpu___lsb 1 -#define reg_iop_sw_spu_r_mc_stat___busy_mpu___width 1 -#define reg_iop_sw_spu_r_mc_stat___busy_mpu___bit 1 -#define reg_iop_sw_spu_r_mc_stat___busy_spu0___lsb 2 -#define reg_iop_sw_spu_r_mc_stat___busy_spu0___width 1 -#define reg_iop_sw_spu_r_mc_stat___busy_spu0___bit 2 -#define reg_iop_sw_spu_r_mc_stat___busy_spu1___lsb 3 -#define reg_iop_sw_spu_r_mc_stat___busy_spu1___width 1 -#define reg_iop_sw_spu_r_mc_stat___busy_spu1___bit 3 -#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___lsb 4 -#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___width 1 -#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___bit 4 -#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___lsb 5 -#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___width 1 -#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___bit 5 -#define reg_iop_sw_spu_r_mc_stat___owned_by_spu0___lsb 6 -#define reg_iop_sw_spu_r_mc_stat___owned_by_spu0___width 1 -#define reg_iop_sw_spu_r_mc_stat___owned_by_spu0___bit 6 -#define reg_iop_sw_spu_r_mc_stat___owned_by_spu1___lsb 7 -#define reg_iop_sw_spu_r_mc_stat___owned_by_spu1___width 1 -#define reg_iop_sw_spu_r_mc_stat___owned_by_spu1___bit 7 -#define reg_iop_sw_spu_r_mc_stat_offset 20 - -/* Register rw_bus0_clr_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus0_clr_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus0_clr_mask___byte0___width 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask___byte1___width 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask___byte2___lsb 16 -#define reg_iop_sw_spu_rw_bus0_clr_mask___byte2___width 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask___byte3___lsb 24 -#define reg_iop_sw_spu_rw_bus0_clr_mask___byte3___width 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask_offset 24 - -/* Register rw_bus0_set_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus0_set_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus0_set_mask___byte0___width 8 -#define reg_iop_sw_spu_rw_bus0_set_mask___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus0_set_mask___byte1___width 8 -#define reg_iop_sw_spu_rw_bus0_set_mask___byte2___lsb 16 -#define reg_iop_sw_spu_rw_bus0_set_mask___byte2___width 8 -#define reg_iop_sw_spu_rw_bus0_set_mask___byte3___lsb 24 -#define reg_iop_sw_spu_rw_bus0_set_mask___byte3___width 8 -#define reg_iop_sw_spu_rw_bus0_set_mask_offset 28 - -/* Register rw_bus0_oe_clr_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte0___width 1 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte0___bit 0 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte1___lsb 1 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte1___width 1 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte1___bit 1 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte2___lsb 2 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte2___width 1 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte2___bit 2 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte3___lsb 3 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte3___width 1 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask___byte3___bit 3 -#define reg_iop_sw_spu_rw_bus0_oe_clr_mask_offset 32 - -/* Register rw_bus0_oe_set_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte0___width 1 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte0___bit 0 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte1___lsb 1 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte1___width 1 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte1___bit 1 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte2___lsb 2 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte2___width 1 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte2___bit 2 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte3___lsb 3 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte3___width 1 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask___byte3___bit 3 -#define reg_iop_sw_spu_rw_bus0_oe_set_mask_offset 36 - -/* Register r_bus0_in, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_bus0_in_offset 40 - -/* Register rw_bus1_clr_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus1_clr_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus1_clr_mask___byte0___width 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask___byte1___width 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask___byte2___lsb 16 -#define reg_iop_sw_spu_rw_bus1_clr_mask___byte2___width 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask___byte3___lsb 24 -#define reg_iop_sw_spu_rw_bus1_clr_mask___byte3___width 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask_offset 44 - -/* Register rw_bus1_set_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus1_set_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus1_set_mask___byte0___width 8 -#define reg_iop_sw_spu_rw_bus1_set_mask___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus1_set_mask___byte1___width 8 -#define reg_iop_sw_spu_rw_bus1_set_mask___byte2___lsb 16 -#define reg_iop_sw_spu_rw_bus1_set_mask___byte2___width 8 -#define reg_iop_sw_spu_rw_bus1_set_mask___byte3___lsb 24 -#define reg_iop_sw_spu_rw_bus1_set_mask___byte3___width 8 -#define reg_iop_sw_spu_rw_bus1_set_mask_offset 48 - -/* Register rw_bus1_oe_clr_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte0___width 1 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte0___bit 0 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte1___lsb 1 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte1___width 1 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte1___bit 1 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte2___lsb 2 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte2___width 1 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte2___bit 2 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte3___lsb 3 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte3___width 1 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask___byte3___bit 3 -#define reg_iop_sw_spu_rw_bus1_oe_clr_mask_offset 52 - -/* Register rw_bus1_oe_set_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte0___width 1 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte0___bit 0 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte1___lsb 1 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte1___width 1 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte1___bit 1 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte2___lsb 2 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte2___width 1 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte2___bit 2 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte3___lsb 3 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte3___width 1 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask___byte3___bit 3 -#define reg_iop_sw_spu_rw_bus1_oe_set_mask_offset 56 - -/* Register r_bus1_in, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_bus1_in_offset 60 - -/* Register rw_gio_clr_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_clr_mask___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_clr_mask___val___width 32 -#define reg_iop_sw_spu_rw_gio_clr_mask_offset 64 - -/* Register rw_gio_set_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_set_mask___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_set_mask___val___width 32 -#define reg_iop_sw_spu_rw_gio_set_mask_offset 68 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_clr_mask___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask___val___width 32 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_offset 72 - -/* Register rw_gio_oe_set_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_set_mask___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_set_mask___val___width 32 -#define reg_iop_sw_spu_rw_gio_oe_set_mask_offset 76 - -/* Register r_gio_in, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_gio_in_offset 80 - -/* Register rw_bus0_clr_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus0_clr_mask_lo___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus0_clr_mask_lo___byte0___width 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask_lo___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask_lo___byte1___width 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask_lo_offset 84 - -/* Register rw_bus0_clr_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus0_clr_mask_hi___byte2___lsb 0 -#define reg_iop_sw_spu_rw_bus0_clr_mask_hi___byte2___width 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask_hi___byte3___lsb 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask_hi___byte3___width 8 -#define reg_iop_sw_spu_rw_bus0_clr_mask_hi_offset 88 - -/* Register rw_bus0_set_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus0_set_mask_lo___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus0_set_mask_lo___byte0___width 8 -#define reg_iop_sw_spu_rw_bus0_set_mask_lo___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus0_set_mask_lo___byte1___width 8 -#define reg_iop_sw_spu_rw_bus0_set_mask_lo_offset 92 - -/* Register rw_bus0_set_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus0_set_mask_hi___byte2___lsb 0 -#define reg_iop_sw_spu_rw_bus0_set_mask_hi___byte2___width 8 -#define reg_iop_sw_spu_rw_bus0_set_mask_hi___byte3___lsb 8 -#define reg_iop_sw_spu_rw_bus0_set_mask_hi___byte3___width 8 -#define reg_iop_sw_spu_rw_bus0_set_mask_hi_offset 96 - -/* Register rw_bus1_clr_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus1_clr_mask_lo___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus1_clr_mask_lo___byte0___width 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask_lo___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask_lo___byte1___width 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask_lo_offset 100 - -/* Register rw_bus1_clr_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus1_clr_mask_hi___byte2___lsb 0 -#define reg_iop_sw_spu_rw_bus1_clr_mask_hi___byte2___width 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask_hi___byte3___lsb 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask_hi___byte3___width 8 -#define reg_iop_sw_spu_rw_bus1_clr_mask_hi_offset 104 - -/* Register rw_bus1_set_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus1_set_mask_lo___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus1_set_mask_lo___byte0___width 8 -#define reg_iop_sw_spu_rw_bus1_set_mask_lo___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus1_set_mask_lo___byte1___width 8 -#define reg_iop_sw_spu_rw_bus1_set_mask_lo_offset 108 - -/* Register rw_bus1_set_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus1_set_mask_hi___byte2___lsb 0 -#define reg_iop_sw_spu_rw_bus1_set_mask_hi___byte2___width 8 -#define reg_iop_sw_spu_rw_bus1_set_mask_hi___byte3___lsb 8 -#define reg_iop_sw_spu_rw_bus1_set_mask_hi___byte3___width 8 -#define reg_iop_sw_spu_rw_bus1_set_mask_hi_offset 112 - -/* Register rw_gio_clr_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_clr_mask_lo___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_clr_mask_lo___val___width 16 -#define reg_iop_sw_spu_rw_gio_clr_mask_lo_offset 116 - -/* Register rw_gio_clr_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_clr_mask_hi___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_clr_mask_hi___val___width 16 -#define reg_iop_sw_spu_rw_gio_clr_mask_hi_offset 120 - -/* Register rw_gio_set_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_set_mask_lo___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_set_mask_lo___val___width 16 -#define reg_iop_sw_spu_rw_gio_set_mask_lo_offset 124 - -/* Register rw_gio_set_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_set_mask_hi___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_set_mask_hi___val___width 16 -#define reg_iop_sw_spu_rw_gio_set_mask_hi_offset 128 - -/* Register rw_gio_oe_clr_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo___val___width 16 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo_offset 132 - -/* Register rw_gio_oe_clr_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi___val___width 16 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi_offset 136 - -/* Register rw_gio_oe_set_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo___val___width 16 -#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo_offset 140 - -/* Register rw_gio_oe_set_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi___val___width 16 -#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi_offset 144 - -/* Register rw_cpu_intr, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_cpu_intr___intr0___lsb 0 -#define reg_iop_sw_spu_rw_cpu_intr___intr0___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr0___bit 0 -#define reg_iop_sw_spu_rw_cpu_intr___intr1___lsb 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr1___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr1___bit 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr2___lsb 2 -#define reg_iop_sw_spu_rw_cpu_intr___intr2___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr2___bit 2 -#define reg_iop_sw_spu_rw_cpu_intr___intr3___lsb 3 -#define reg_iop_sw_spu_rw_cpu_intr___intr3___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr3___bit 3 -#define reg_iop_sw_spu_rw_cpu_intr___intr4___lsb 4 -#define reg_iop_sw_spu_rw_cpu_intr___intr4___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr4___bit 4 -#define reg_iop_sw_spu_rw_cpu_intr___intr5___lsb 5 -#define reg_iop_sw_spu_rw_cpu_intr___intr5___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr5___bit 5 -#define reg_iop_sw_spu_rw_cpu_intr___intr6___lsb 6 -#define reg_iop_sw_spu_rw_cpu_intr___intr6___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr6___bit 6 -#define reg_iop_sw_spu_rw_cpu_intr___intr7___lsb 7 -#define reg_iop_sw_spu_rw_cpu_intr___intr7___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr7___bit 7 -#define reg_iop_sw_spu_rw_cpu_intr___intr8___lsb 8 -#define reg_iop_sw_spu_rw_cpu_intr___intr8___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr8___bit 8 -#define reg_iop_sw_spu_rw_cpu_intr___intr9___lsb 9 -#define reg_iop_sw_spu_rw_cpu_intr___intr9___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr9___bit 9 -#define reg_iop_sw_spu_rw_cpu_intr___intr10___lsb 10 -#define reg_iop_sw_spu_rw_cpu_intr___intr10___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr10___bit 10 -#define reg_iop_sw_spu_rw_cpu_intr___intr11___lsb 11 -#define reg_iop_sw_spu_rw_cpu_intr___intr11___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr11___bit 11 -#define reg_iop_sw_spu_rw_cpu_intr___intr12___lsb 12 -#define reg_iop_sw_spu_rw_cpu_intr___intr12___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr12___bit 12 -#define reg_iop_sw_spu_rw_cpu_intr___intr13___lsb 13 -#define reg_iop_sw_spu_rw_cpu_intr___intr13___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr13___bit 13 -#define reg_iop_sw_spu_rw_cpu_intr___intr14___lsb 14 -#define reg_iop_sw_spu_rw_cpu_intr___intr14___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr14___bit 14 -#define reg_iop_sw_spu_rw_cpu_intr___intr15___lsb 15 -#define reg_iop_sw_spu_rw_cpu_intr___intr15___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr15___bit 15 -#define reg_iop_sw_spu_rw_cpu_intr_offset 148 - -/* Register r_cpu_intr, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_cpu_intr___intr0___lsb 0 -#define reg_iop_sw_spu_r_cpu_intr___intr0___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr0___bit 0 -#define reg_iop_sw_spu_r_cpu_intr___intr1___lsb 1 -#define reg_iop_sw_spu_r_cpu_intr___intr1___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr1___bit 1 -#define reg_iop_sw_spu_r_cpu_intr___intr2___lsb 2 -#define reg_iop_sw_spu_r_cpu_intr___intr2___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr2___bit 2 -#define reg_iop_sw_spu_r_cpu_intr___intr3___lsb 3 -#define reg_iop_sw_spu_r_cpu_intr___intr3___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr3___bit 3 -#define reg_iop_sw_spu_r_cpu_intr___intr4___lsb 4 -#define reg_iop_sw_spu_r_cpu_intr___intr4___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr4___bit 4 -#define reg_iop_sw_spu_r_cpu_intr___intr5___lsb 5 -#define reg_iop_sw_spu_r_cpu_intr___intr5___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr5___bit 5 -#define reg_iop_sw_spu_r_cpu_intr___intr6___lsb 6 -#define reg_iop_sw_spu_r_cpu_intr___intr6___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr6___bit 6 -#define reg_iop_sw_spu_r_cpu_intr___intr7___lsb 7 -#define reg_iop_sw_spu_r_cpu_intr___intr7___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr7___bit 7 -#define reg_iop_sw_spu_r_cpu_intr___intr8___lsb 8 -#define reg_iop_sw_spu_r_cpu_intr___intr8___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr8___bit 8 -#define reg_iop_sw_spu_r_cpu_intr___intr9___lsb 9 -#define reg_iop_sw_spu_r_cpu_intr___intr9___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr9___bit 9 -#define reg_iop_sw_spu_r_cpu_intr___intr10___lsb 10 -#define reg_iop_sw_spu_r_cpu_intr___intr10___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr10___bit 10 -#define reg_iop_sw_spu_r_cpu_intr___intr11___lsb 11 -#define reg_iop_sw_spu_r_cpu_intr___intr11___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr11___bit 11 -#define reg_iop_sw_spu_r_cpu_intr___intr12___lsb 12 -#define reg_iop_sw_spu_r_cpu_intr___intr12___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr12___bit 12 -#define reg_iop_sw_spu_r_cpu_intr___intr13___lsb 13 -#define reg_iop_sw_spu_r_cpu_intr___intr13___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr13___bit 13 -#define reg_iop_sw_spu_r_cpu_intr___intr14___lsb 14 -#define reg_iop_sw_spu_r_cpu_intr___intr14___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr14___bit 14 -#define reg_iop_sw_spu_r_cpu_intr___intr15___lsb 15 -#define reg_iop_sw_spu_r_cpu_intr___intr15___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr15___bit 15 -#define reg_iop_sw_spu_r_cpu_intr_offset 152 - -/* Register r_hw_intr, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___lsb 0 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___bit 0 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___lsb 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___bit 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___lsb 2 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___bit 2 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___lsb 3 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___bit 3 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___lsb 4 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___bit 4 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___lsb 5 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___bit 5 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___lsb 6 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___bit 6 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___lsb 7 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___bit 7 -#define reg_iop_sw_spu_r_hw_intr___timer_grp0___lsb 8 -#define reg_iop_sw_spu_r_hw_intr___timer_grp0___width 1 -#define reg_iop_sw_spu_r_hw_intr___timer_grp0___bit 8 -#define reg_iop_sw_spu_r_hw_intr___timer_grp1___lsb 9 -#define reg_iop_sw_spu_r_hw_intr___timer_grp1___width 1 -#define reg_iop_sw_spu_r_hw_intr___timer_grp1___bit 9 -#define reg_iop_sw_spu_r_hw_intr___timer_grp2___lsb 10 -#define reg_iop_sw_spu_r_hw_intr___timer_grp2___width 1 -#define reg_iop_sw_spu_r_hw_intr___timer_grp2___bit 10 -#define reg_iop_sw_spu_r_hw_intr___timer_grp3___lsb 11 -#define reg_iop_sw_spu_r_hw_intr___timer_grp3___width 1 -#define reg_iop_sw_spu_r_hw_intr___timer_grp3___bit 11 -#define reg_iop_sw_spu_r_hw_intr___fifo_out0___lsb 12 -#define reg_iop_sw_spu_r_hw_intr___fifo_out0___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_out0___bit 12 -#define reg_iop_sw_spu_r_hw_intr___fifo_out0_extra___lsb 13 -#define reg_iop_sw_spu_r_hw_intr___fifo_out0_extra___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_out0_extra___bit 13 -#define reg_iop_sw_spu_r_hw_intr___fifo_in0___lsb 14 -#define reg_iop_sw_spu_r_hw_intr___fifo_in0___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_in0___bit 14 -#define reg_iop_sw_spu_r_hw_intr___fifo_in0_extra___lsb 15 -#define reg_iop_sw_spu_r_hw_intr___fifo_in0_extra___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_in0_extra___bit 15 -#define reg_iop_sw_spu_r_hw_intr___fifo_out1___lsb 16 -#define reg_iop_sw_spu_r_hw_intr___fifo_out1___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_out1___bit 16 -#define reg_iop_sw_spu_r_hw_intr___fifo_out1_extra___lsb 17 -#define reg_iop_sw_spu_r_hw_intr___fifo_out1_extra___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_out1_extra___bit 17 -#define reg_iop_sw_spu_r_hw_intr___fifo_in1___lsb 18 -#define reg_iop_sw_spu_r_hw_intr___fifo_in1___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_in1___bit 18 -#define reg_iop_sw_spu_r_hw_intr___fifo_in1_extra___lsb 19 -#define reg_iop_sw_spu_r_hw_intr___fifo_in1_extra___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_in1_extra___bit 19 -#define reg_iop_sw_spu_r_hw_intr___dmc_out0___lsb 20 -#define reg_iop_sw_spu_r_hw_intr___dmc_out0___width 1 -#define reg_iop_sw_spu_r_hw_intr___dmc_out0___bit 20 -#define reg_iop_sw_spu_r_hw_intr___dmc_in0___lsb 21 -#define reg_iop_sw_spu_r_hw_intr___dmc_in0___width 1 -#define reg_iop_sw_spu_r_hw_intr___dmc_in0___bit 21 -#define reg_iop_sw_spu_r_hw_intr___dmc_out1___lsb 22 -#define reg_iop_sw_spu_r_hw_intr___dmc_out1___width 1 -#define reg_iop_sw_spu_r_hw_intr___dmc_out1___bit 22 -#define reg_iop_sw_spu_r_hw_intr___dmc_in1___lsb 23 -#define reg_iop_sw_spu_r_hw_intr___dmc_in1___width 1 -#define reg_iop_sw_spu_r_hw_intr___dmc_in1___bit 23 -#define reg_iop_sw_spu_r_hw_intr_offset 156 - -/* Register rw_mpu_intr, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_mpu_intr___intr0___lsb 0 -#define reg_iop_sw_spu_rw_mpu_intr___intr0___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr0___bit 0 -#define reg_iop_sw_spu_rw_mpu_intr___intr1___lsb 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr1___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr1___bit 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr2___lsb 2 -#define reg_iop_sw_spu_rw_mpu_intr___intr2___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr2___bit 2 -#define reg_iop_sw_spu_rw_mpu_intr___intr3___lsb 3 -#define reg_iop_sw_spu_rw_mpu_intr___intr3___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr3___bit 3 -#define reg_iop_sw_spu_rw_mpu_intr___intr4___lsb 4 -#define reg_iop_sw_spu_rw_mpu_intr___intr4___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr4___bit 4 -#define reg_iop_sw_spu_rw_mpu_intr___intr5___lsb 5 -#define reg_iop_sw_spu_rw_mpu_intr___intr5___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr5___bit 5 -#define reg_iop_sw_spu_rw_mpu_intr___intr6___lsb 6 -#define reg_iop_sw_spu_rw_mpu_intr___intr6___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr6___bit 6 -#define reg_iop_sw_spu_rw_mpu_intr___intr7___lsb 7 -#define reg_iop_sw_spu_rw_mpu_intr___intr7___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr7___bit 7 -#define reg_iop_sw_spu_rw_mpu_intr___intr8___lsb 8 -#define reg_iop_sw_spu_rw_mpu_intr___intr8___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr8___bit 8 -#define reg_iop_sw_spu_rw_mpu_intr___intr9___lsb 9 -#define reg_iop_sw_spu_rw_mpu_intr___intr9___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr9___bit 9 -#define reg_iop_sw_spu_rw_mpu_intr___intr10___lsb 10 -#define reg_iop_sw_spu_rw_mpu_intr___intr10___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr10___bit 10 -#define reg_iop_sw_spu_rw_mpu_intr___intr11___lsb 11 -#define reg_iop_sw_spu_rw_mpu_intr___intr11___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr11___bit 11 -#define reg_iop_sw_spu_rw_mpu_intr___intr12___lsb 12 -#define reg_iop_sw_spu_rw_mpu_intr___intr12___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr12___bit 12 -#define reg_iop_sw_spu_rw_mpu_intr___intr13___lsb 13 -#define reg_iop_sw_spu_rw_mpu_intr___intr13___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr13___bit 13 -#define reg_iop_sw_spu_rw_mpu_intr___intr14___lsb 14 -#define reg_iop_sw_spu_rw_mpu_intr___intr14___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr14___bit 14 -#define reg_iop_sw_spu_rw_mpu_intr___intr15___lsb 15 -#define reg_iop_sw_spu_rw_mpu_intr___intr15___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr15___bit 15 -#define reg_iop_sw_spu_rw_mpu_intr_offset 160 - -/* Register r_mpu_intr, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_mpu_intr___intr0___lsb 0 -#define reg_iop_sw_spu_r_mpu_intr___intr0___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr0___bit 0 -#define reg_iop_sw_spu_r_mpu_intr___intr1___lsb 1 -#define reg_iop_sw_spu_r_mpu_intr___intr1___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr1___bit 1 -#define reg_iop_sw_spu_r_mpu_intr___intr2___lsb 2 -#define reg_iop_sw_spu_r_mpu_intr___intr2___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr2___bit 2 -#define reg_iop_sw_spu_r_mpu_intr___intr3___lsb 3 -#define reg_iop_sw_spu_r_mpu_intr___intr3___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr3___bit 3 -#define reg_iop_sw_spu_r_mpu_intr___intr4___lsb 4 -#define reg_iop_sw_spu_r_mpu_intr___intr4___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr4___bit 4 -#define reg_iop_sw_spu_r_mpu_intr___intr5___lsb 5 -#define reg_iop_sw_spu_r_mpu_intr___intr5___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr5___bit 5 -#define reg_iop_sw_spu_r_mpu_intr___intr6___lsb 6 -#define reg_iop_sw_spu_r_mpu_intr___intr6___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr6___bit 6 -#define reg_iop_sw_spu_r_mpu_intr___intr7___lsb 7 -#define reg_iop_sw_spu_r_mpu_intr___intr7___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr7___bit 7 -#define reg_iop_sw_spu_r_mpu_intr___intr8___lsb 8 -#define reg_iop_sw_spu_r_mpu_intr___intr8___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr8___bit 8 -#define reg_iop_sw_spu_r_mpu_intr___intr9___lsb 9 -#define reg_iop_sw_spu_r_mpu_intr___intr9___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr9___bit 9 -#define reg_iop_sw_spu_r_mpu_intr___intr10___lsb 10 -#define reg_iop_sw_spu_r_mpu_intr___intr10___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr10___bit 10 -#define reg_iop_sw_spu_r_mpu_intr___intr11___lsb 11 -#define reg_iop_sw_spu_r_mpu_intr___intr11___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr11___bit 11 -#define reg_iop_sw_spu_r_mpu_intr___intr12___lsb 12 -#define reg_iop_sw_spu_r_mpu_intr___intr12___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr12___bit 12 -#define reg_iop_sw_spu_r_mpu_intr___intr13___lsb 13 -#define reg_iop_sw_spu_r_mpu_intr___intr13___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr13___bit 13 -#define reg_iop_sw_spu_r_mpu_intr___intr14___lsb 14 -#define reg_iop_sw_spu_r_mpu_intr___intr14___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr14___bit 14 -#define reg_iop_sw_spu_r_mpu_intr___intr15___lsb 15 -#define reg_iop_sw_spu_r_mpu_intr___intr15___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr15___bit 15 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr0___lsb 16 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr0___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr0___bit 16 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr1___lsb 17 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr1___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr1___bit 17 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr2___lsb 18 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr2___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr2___bit 18 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr3___lsb 19 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr3___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr3___bit 19 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr4___lsb 20 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr4___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr4___bit 20 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr5___lsb 21 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr5___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr5___bit 21 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr6___lsb 22 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr6___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr6___bit 22 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr7___lsb 23 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr7___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr7___bit 23 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr8___lsb 24 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr8___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr8___bit 24 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr9___lsb 25 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr9___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr9___bit 25 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr10___lsb 26 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr10___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr10___bit 26 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr11___lsb 27 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr11___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr11___bit 27 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr12___lsb 28 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr12___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr12___bit 28 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr13___lsb 29 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr13___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr13___bit 29 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr14___lsb 30 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr14___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr14___bit 30 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr15___lsb 31 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr15___width 1 -#define reg_iop_sw_spu_r_mpu_intr___other_spu_intr15___bit 31 -#define reg_iop_sw_spu_r_mpu_intr_offset 164 - - -/* Constants */ -#define regk_iop_sw_spu_copy 0x00000000 -#define regk_iop_sw_spu_no 0x00000000 -#define regk_iop_sw_spu_nop 0x00000000 -#define regk_iop_sw_spu_rd 0x00000002 -#define regk_iop_sw_spu_reg_copy 0x00000001 -#define regk_iop_sw_spu_rw_bus0_clr_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_bus0_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_bus0_oe_set_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_bus0_set_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_bus1_clr_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_bus1_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_bus1_oe_set_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_bus1_set_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_gio_clr_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_gio_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_gio_oe_set_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_gio_set_mask_default 0x00000000 -#define regk_iop_sw_spu_set 0x00000001 -#define regk_iop_sw_spu_wr 0x00000003 -#define regk_iop_sw_spu_yes 0x00000001 -#endif /* __iop_sw_spu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h deleted file mode 100644 index 7129a9a4bedc..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h +++ /dev/null @@ -1,237 +0,0 @@ -#ifndef __iop_timer_grp_defs_asm_h -#define __iop_timer_grp_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_timer_grp.r - * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_timer_grp_defs_asm.h ../../inst/io_proc/rtl/iop_timer_grp.r - * id: $Id: iop_timer_grp_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope iop_timer_grp, type rw */ -#define reg_iop_timer_grp_rw_cfg___clk_src___lsb 0 -#define reg_iop_timer_grp_rw_cfg___clk_src___width 1 -#define reg_iop_timer_grp_rw_cfg___clk_src___bit 0 -#define reg_iop_timer_grp_rw_cfg___trig___lsb 1 -#define reg_iop_timer_grp_rw_cfg___trig___width 2 -#define reg_iop_timer_grp_rw_cfg___clk_gen_div___lsb 3 -#define reg_iop_timer_grp_rw_cfg___clk_gen_div___width 8 -#define reg_iop_timer_grp_rw_cfg___clk_div___lsb 11 -#define reg_iop_timer_grp_rw_cfg___clk_div___width 8 -#define reg_iop_timer_grp_rw_cfg_offset 0 - -/* Register rw_half_period, scope iop_timer_grp, type rw */ -#define reg_iop_timer_grp_rw_half_period___quota_lo___lsb 0 -#define reg_iop_timer_grp_rw_half_period___quota_lo___width 15 -#define reg_iop_timer_grp_rw_half_period___quota_hi___lsb 15 -#define reg_iop_timer_grp_rw_half_period___quota_hi___width 15 -#define reg_iop_timer_grp_rw_half_period___quota_hi_sel___lsb 30 -#define reg_iop_timer_grp_rw_half_period___quota_hi_sel___width 1 -#define reg_iop_timer_grp_rw_half_period___quota_hi_sel___bit 30 -#define reg_iop_timer_grp_rw_half_period_offset 4 - -/* Register rw_half_period_len, scope iop_timer_grp, type rw */ -#define reg_iop_timer_grp_rw_half_period_len_offset 8 - -#define STRIDE_iop_timer_grp_rw_tmr_cfg 4 -/* Register rw_tmr_cfg, scope iop_timer_grp, type rw */ -#define reg_iop_timer_grp_rw_tmr_cfg___clk_src___lsb 0 -#define reg_iop_timer_grp_rw_tmr_cfg___clk_src___width 3 -#define reg_iop_timer_grp_rw_tmr_cfg___strb___lsb 3 -#define reg_iop_timer_grp_rw_tmr_cfg___strb___width 2 -#define reg_iop_timer_grp_rw_tmr_cfg___run_mode___lsb 5 -#define reg_iop_timer_grp_rw_tmr_cfg___run_mode___width 2 -#define reg_iop_timer_grp_rw_tmr_cfg___out_mode___lsb 7 -#define reg_iop_timer_grp_rw_tmr_cfg___out_mode___width 1 -#define reg_iop_timer_grp_rw_tmr_cfg___out_mode___bit 7 -#define reg_iop_timer_grp_rw_tmr_cfg___active_on_tmr___lsb 8 -#define reg_iop_timer_grp_rw_tmr_cfg___active_on_tmr___width 2 -#define reg_iop_timer_grp_rw_tmr_cfg___inv___lsb 10 -#define reg_iop_timer_grp_rw_tmr_cfg___inv___width 1 -#define reg_iop_timer_grp_rw_tmr_cfg___inv___bit 10 -#define reg_iop_timer_grp_rw_tmr_cfg___en_by_tmr___lsb 11 -#define reg_iop_timer_grp_rw_tmr_cfg___en_by_tmr___width 2 -#define reg_iop_timer_grp_rw_tmr_cfg___dis_by_tmr___lsb 13 -#define reg_iop_timer_grp_rw_tmr_cfg___dis_by_tmr___width 2 -#define reg_iop_timer_grp_rw_tmr_cfg___en_only_by_reg___lsb 15 -#define reg_iop_timer_grp_rw_tmr_cfg___en_only_by_reg___width 1 -#define reg_iop_timer_grp_rw_tmr_cfg___en_only_by_reg___bit 15 -#define reg_iop_timer_grp_rw_tmr_cfg___dis_only_by_reg___lsb 16 -#define reg_iop_timer_grp_rw_tmr_cfg___dis_only_by_reg___width 1 -#define reg_iop_timer_grp_rw_tmr_cfg___dis_only_by_reg___bit 16 -#define reg_iop_timer_grp_rw_tmr_cfg___rst_at_en_strb___lsb 17 -#define reg_iop_timer_grp_rw_tmr_cfg___rst_at_en_strb___width 1 -#define reg_iop_timer_grp_rw_tmr_cfg___rst_at_en_strb___bit 17 -#define reg_iop_timer_grp_rw_tmr_cfg_offset 12 - -#define STRIDE_iop_timer_grp_rw_tmr_len 4 -/* Register rw_tmr_len, scope iop_timer_grp, type rw */ -#define reg_iop_timer_grp_rw_tmr_len___val___lsb 0 -#define reg_iop_timer_grp_rw_tmr_len___val___width 16 -#define reg_iop_timer_grp_rw_tmr_len_offset 44 - -/* Register rw_cmd, scope iop_timer_grp, type rw */ -#define reg_iop_timer_grp_rw_cmd___rst___lsb 0 -#define reg_iop_timer_grp_rw_cmd___rst___width 4 -#define reg_iop_timer_grp_rw_cmd___en___lsb 4 -#define reg_iop_timer_grp_rw_cmd___en___width 4 -#define reg_iop_timer_grp_rw_cmd___dis___lsb 8 -#define reg_iop_timer_grp_rw_cmd___dis___width 4 -#define reg_iop_timer_grp_rw_cmd___strb___lsb 12 -#define reg_iop_timer_grp_rw_cmd___strb___width 4 -#define reg_iop_timer_grp_rw_cmd_offset 60 - -/* Register r_clk_gen_cnt, scope iop_timer_grp, type r */ -#define reg_iop_timer_grp_r_clk_gen_cnt_offset 64 - -#define STRIDE_iop_timer_grp_rs_tmr_cnt 8 -/* Register rs_tmr_cnt, scope iop_timer_grp, type rs */ -#define reg_iop_timer_grp_rs_tmr_cnt___val___lsb 0 -#define reg_iop_timer_grp_rs_tmr_cnt___val___width 16 -#define reg_iop_timer_grp_rs_tmr_cnt_offset 68 - -#define STRIDE_iop_timer_grp_r_tmr_cnt 8 -/* Register r_tmr_cnt, scope iop_timer_grp, type r */ -#define reg_iop_timer_grp_r_tmr_cnt___val___lsb 0 -#define reg_iop_timer_grp_r_tmr_cnt___val___width 16 -#define reg_iop_timer_grp_r_tmr_cnt_offset 72 - -/* Register rw_intr_mask, scope iop_timer_grp, type rw */ -#define reg_iop_timer_grp_rw_intr_mask___tmr0___lsb 0 -#define reg_iop_timer_grp_rw_intr_mask___tmr0___width 1 -#define reg_iop_timer_grp_rw_intr_mask___tmr0___bit 0 -#define reg_iop_timer_grp_rw_intr_mask___tmr1___lsb 1 -#define reg_iop_timer_grp_rw_intr_mask___tmr1___width 1 -#define reg_iop_timer_grp_rw_intr_mask___tmr1___bit 1 -#define reg_iop_timer_grp_rw_intr_mask___tmr2___lsb 2 -#define reg_iop_timer_grp_rw_intr_mask___tmr2___width 1 -#define reg_iop_timer_grp_rw_intr_mask___tmr2___bit 2 -#define reg_iop_timer_grp_rw_intr_mask___tmr3___lsb 3 -#define reg_iop_timer_grp_rw_intr_mask___tmr3___width 1 -#define reg_iop_timer_grp_rw_intr_mask___tmr3___bit 3 -#define reg_iop_timer_grp_rw_intr_mask_offset 100 - -/* Register rw_ack_intr, scope iop_timer_grp, type rw */ -#define reg_iop_timer_grp_rw_ack_intr___tmr0___lsb 0 -#define reg_iop_timer_grp_rw_ack_intr___tmr0___width 1 -#define reg_iop_timer_grp_rw_ack_intr___tmr0___bit 0 -#define reg_iop_timer_grp_rw_ack_intr___tmr1___lsb 1 -#define reg_iop_timer_grp_rw_ack_intr___tmr1___width 1 -#define reg_iop_timer_grp_rw_ack_intr___tmr1___bit 1 -#define reg_iop_timer_grp_rw_ack_intr___tmr2___lsb 2 -#define reg_iop_timer_grp_rw_ack_intr___tmr2___width 1 -#define reg_iop_timer_grp_rw_ack_intr___tmr2___bit 2 -#define reg_iop_timer_grp_rw_ack_intr___tmr3___lsb 3 -#define reg_iop_timer_grp_rw_ack_intr___tmr3___width 1 -#define reg_iop_timer_grp_rw_ack_intr___tmr3___bit 3 -#define reg_iop_timer_grp_rw_ack_intr_offset 104 - -/* Register r_intr, scope iop_timer_grp, type r */ -#define reg_iop_timer_grp_r_intr___tmr0___lsb 0 -#define reg_iop_timer_grp_r_intr___tmr0___width 1 -#define reg_iop_timer_grp_r_intr___tmr0___bit 0 -#define reg_iop_timer_grp_r_intr___tmr1___lsb 1 -#define reg_iop_timer_grp_r_intr___tmr1___width 1 -#define reg_iop_timer_grp_r_intr___tmr1___bit 1 -#define reg_iop_timer_grp_r_intr___tmr2___lsb 2 -#define reg_iop_timer_grp_r_intr___tmr2___width 1 -#define reg_iop_timer_grp_r_intr___tmr2___bit 2 -#define reg_iop_timer_grp_r_intr___tmr3___lsb 3 -#define reg_iop_timer_grp_r_intr___tmr3___width 1 -#define reg_iop_timer_grp_r_intr___tmr3___bit 3 -#define reg_iop_timer_grp_r_intr_offset 108 - -/* Register r_masked_intr, scope iop_timer_grp, type r */ -#define reg_iop_timer_grp_r_masked_intr___tmr0___lsb 0 -#define reg_iop_timer_grp_r_masked_intr___tmr0___width 1 -#define reg_iop_timer_grp_r_masked_intr___tmr0___bit 0 -#define reg_iop_timer_grp_r_masked_intr___tmr1___lsb 1 -#define reg_iop_timer_grp_r_masked_intr___tmr1___width 1 -#define reg_iop_timer_grp_r_masked_intr___tmr1___bit 1 -#define reg_iop_timer_grp_r_masked_intr___tmr2___lsb 2 -#define reg_iop_timer_grp_r_masked_intr___tmr2___width 1 -#define reg_iop_timer_grp_r_masked_intr___tmr2___bit 2 -#define reg_iop_timer_grp_r_masked_intr___tmr3___lsb 3 -#define reg_iop_timer_grp_r_masked_intr___tmr3___width 1 -#define reg_iop_timer_grp_r_masked_intr___tmr3___bit 3 -#define reg_iop_timer_grp_r_masked_intr_offset 112 - - -/* Constants */ -#define regk_iop_timer_grp_clk200 0x00000000 -#define regk_iop_timer_grp_clk_gen 0x00000002 -#define regk_iop_timer_grp_complete 0x00000002 -#define regk_iop_timer_grp_div_clk200 0x00000001 -#define regk_iop_timer_grp_div_clk_gen 0x00000003 -#define regk_iop_timer_grp_ext 0x00000001 -#define regk_iop_timer_grp_hi 0x00000000 -#define regk_iop_timer_grp_long_period 0x00000001 -#define regk_iop_timer_grp_neg 0x00000002 -#define regk_iop_timer_grp_no 0x00000000 -#define regk_iop_timer_grp_once 0x00000003 -#define regk_iop_timer_grp_pause 0x00000001 -#define regk_iop_timer_grp_pos 0x00000001 -#define regk_iop_timer_grp_pos_neg 0x00000003 -#define regk_iop_timer_grp_pulse 0x00000000 -#define regk_iop_timer_grp_r_tmr_cnt_size 0x00000004 -#define regk_iop_timer_grp_rs_tmr_cnt_size 0x00000004 -#define regk_iop_timer_grp_rw_cfg_default 0x00000002 -#define regk_iop_timer_grp_rw_intr_mask_default 0x00000000 -#define regk_iop_timer_grp_rw_tmr_cfg_default0 0x00018000 -#define regk_iop_timer_grp_rw_tmr_cfg_default1 0x0001a900 -#define regk_iop_timer_grp_rw_tmr_cfg_default2 0x0001d200 -#define regk_iop_timer_grp_rw_tmr_cfg_default3 0x0001fb00 -#define regk_iop_timer_grp_rw_tmr_cfg_size 0x00000004 -#define regk_iop_timer_grp_rw_tmr_len_default 0x00000000 -#define regk_iop_timer_grp_rw_tmr_len_size 0x00000004 -#define regk_iop_timer_grp_short_period 0x00000000 -#define regk_iop_timer_grp_stop 0x00000000 -#define regk_iop_timer_grp_tmr 0x00000004 -#define regk_iop_timer_grp_toggle 0x00000001 -#define regk_iop_timer_grp_yes 0x00000001 -#endif /* __iop_timer_grp_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h deleted file mode 100644 index 1005d9db80dc..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h +++ /dev/null @@ -1,157 +0,0 @@ -#ifndef __iop_trigger_grp_defs_asm_h -#define __iop_trigger_grp_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_trigger_grp.r - * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_trigger_grp_defs_asm.h ../../inst/io_proc/rtl/iop_trigger_grp.r - * id: $Id: iop_trigger_grp_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -#define STRIDE_iop_trigger_grp_rw_cfg 4 -/* Register rw_cfg, scope iop_trigger_grp, type rw */ -#define reg_iop_trigger_grp_rw_cfg___action___lsb 0 -#define reg_iop_trigger_grp_rw_cfg___action___width 2 -#define reg_iop_trigger_grp_rw_cfg___once___lsb 2 -#define reg_iop_trigger_grp_rw_cfg___once___width 1 -#define reg_iop_trigger_grp_rw_cfg___once___bit 2 -#define reg_iop_trigger_grp_rw_cfg___trig___lsb 3 -#define reg_iop_trigger_grp_rw_cfg___trig___width 3 -#define reg_iop_trigger_grp_rw_cfg___en_only_by_reg___lsb 6 -#define reg_iop_trigger_grp_rw_cfg___en_only_by_reg___width 1 -#define reg_iop_trigger_grp_rw_cfg___en_only_by_reg___bit 6 -#define reg_iop_trigger_grp_rw_cfg___dis_only_by_reg___lsb 7 -#define reg_iop_trigger_grp_rw_cfg___dis_only_by_reg___width 1 -#define reg_iop_trigger_grp_rw_cfg___dis_only_by_reg___bit 7 -#define reg_iop_trigger_grp_rw_cfg_offset 0 - -/* Register rw_cmd, scope iop_trigger_grp, type rw */ -#define reg_iop_trigger_grp_rw_cmd___dis___lsb 0 -#define reg_iop_trigger_grp_rw_cmd___dis___width 4 -#define reg_iop_trigger_grp_rw_cmd___en___lsb 4 -#define reg_iop_trigger_grp_rw_cmd___en___width 4 -#define reg_iop_trigger_grp_rw_cmd_offset 16 - -/* Register rw_intr_mask, scope iop_trigger_grp, type rw */ -#define reg_iop_trigger_grp_rw_intr_mask___trig0___lsb 0 -#define reg_iop_trigger_grp_rw_intr_mask___trig0___width 1 -#define reg_iop_trigger_grp_rw_intr_mask___trig0___bit 0 -#define reg_iop_trigger_grp_rw_intr_mask___trig1___lsb 1 -#define reg_iop_trigger_grp_rw_intr_mask___trig1___width 1 -#define reg_iop_trigger_grp_rw_intr_mask___trig1___bit 1 -#define reg_iop_trigger_grp_rw_intr_mask___trig2___lsb 2 -#define reg_iop_trigger_grp_rw_intr_mask___trig2___width 1 -#define reg_iop_trigger_grp_rw_intr_mask___trig2___bit 2 -#define reg_iop_trigger_grp_rw_intr_mask___trig3___lsb 3 -#define reg_iop_trigger_grp_rw_intr_mask___trig3___width 1 -#define reg_iop_trigger_grp_rw_intr_mask___trig3___bit 3 -#define reg_iop_trigger_grp_rw_intr_mask_offset 20 - -/* Register rw_ack_intr, scope iop_trigger_grp, type rw */ -#define reg_iop_trigger_grp_rw_ack_intr___trig0___lsb 0 -#define reg_iop_trigger_grp_rw_ack_intr___trig0___width 1 -#define reg_iop_trigger_grp_rw_ack_intr___trig0___bit 0 -#define reg_iop_trigger_grp_rw_ack_intr___trig1___lsb 1 -#define reg_iop_trigger_grp_rw_ack_intr___trig1___width 1 -#define reg_iop_trigger_grp_rw_ack_intr___trig1___bit 1 -#define reg_iop_trigger_grp_rw_ack_intr___trig2___lsb 2 -#define reg_iop_trigger_grp_rw_ack_intr___trig2___width 1 -#define reg_iop_trigger_grp_rw_ack_intr___trig2___bit 2 -#define reg_iop_trigger_grp_rw_ack_intr___trig3___lsb 3 -#define reg_iop_trigger_grp_rw_ack_intr___trig3___width 1 -#define reg_iop_trigger_grp_rw_ack_intr___trig3___bit 3 -#define reg_iop_trigger_grp_rw_ack_intr_offset 24 - -/* Register r_intr, scope iop_trigger_grp, type r */ -#define reg_iop_trigger_grp_r_intr___trig0___lsb 0 -#define reg_iop_trigger_grp_r_intr___trig0___width 1 -#define reg_iop_trigger_grp_r_intr___trig0___bit 0 -#define reg_iop_trigger_grp_r_intr___trig1___lsb 1 -#define reg_iop_trigger_grp_r_intr___trig1___width 1 -#define reg_iop_trigger_grp_r_intr___trig1___bit 1 -#define reg_iop_trigger_grp_r_intr___trig2___lsb 2 -#define reg_iop_trigger_grp_r_intr___trig2___width 1 -#define reg_iop_trigger_grp_r_intr___trig2___bit 2 -#define reg_iop_trigger_grp_r_intr___trig3___lsb 3 -#define reg_iop_trigger_grp_r_intr___trig3___width 1 -#define reg_iop_trigger_grp_r_intr___trig3___bit 3 -#define reg_iop_trigger_grp_r_intr_offset 28 - -/* Register r_masked_intr, scope iop_trigger_grp, type r */ -#define reg_iop_trigger_grp_r_masked_intr___trig0___lsb 0 -#define reg_iop_trigger_grp_r_masked_intr___trig0___width 1 -#define reg_iop_trigger_grp_r_masked_intr___trig0___bit 0 -#define reg_iop_trigger_grp_r_masked_intr___trig1___lsb 1 -#define reg_iop_trigger_grp_r_masked_intr___trig1___width 1 -#define reg_iop_trigger_grp_r_masked_intr___trig1___bit 1 -#define reg_iop_trigger_grp_r_masked_intr___trig2___lsb 2 -#define reg_iop_trigger_grp_r_masked_intr___trig2___width 1 -#define reg_iop_trigger_grp_r_masked_intr___trig2___bit 2 -#define reg_iop_trigger_grp_r_masked_intr___trig3___lsb 3 -#define reg_iop_trigger_grp_r_masked_intr___trig3___width 1 -#define reg_iop_trigger_grp_r_masked_intr___trig3___bit 3 -#define reg_iop_trigger_grp_r_masked_intr_offset 32 - - -/* Constants */ -#define regk_iop_trigger_grp_fall 0x00000002 -#define regk_iop_trigger_grp_fall_lo 0x00000006 -#define regk_iop_trigger_grp_no 0x00000000 -#define regk_iop_trigger_grp_off 0x00000000 -#define regk_iop_trigger_grp_pulse 0x00000000 -#define regk_iop_trigger_grp_rise 0x00000001 -#define regk_iop_trigger_grp_rise_fall 0x00000003 -#define regk_iop_trigger_grp_rise_fall_hi 0x00000007 -#define regk_iop_trigger_grp_rise_fall_lo 0x00000004 -#define regk_iop_trigger_grp_rise_hi 0x00000005 -#define regk_iop_trigger_grp_rw_cfg_default 0x000000c0 -#define regk_iop_trigger_grp_rw_cfg_size 0x00000004 -#define regk_iop_trigger_grp_rw_intr_mask_default 0x00000000 -#define regk_iop_trigger_grp_toggle 0x00000003 -#define regk_iop_trigger_grp_yes 0x00000001 -#endif /* __iop_trigger_grp_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h b/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h deleted file mode 100644 index e13feb20a7e3..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef __iop_version_defs_asm_h -#define __iop_version_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_version.r - * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp - * last modfied: Mon Apr 11 16:08:44 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_version_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_version.r - * id: $Id: iop_version_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register r_version, scope iop_version, type r */ -#define reg_iop_version_r_version___nr___lsb 0 -#define reg_iop_version_r_version___nr___width 8 -#define reg_iop_version_r_version_offset 0 - - -/* Constants */ -#define regk_iop_version_v1_0 0x00000001 -#endif /* __iop_version_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h deleted file mode 100644 index 90e4785b6474..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h +++ /dev/null @@ -1,232 +0,0 @@ -#ifndef __iop_crc_par_defs_h -#define __iop_crc_par_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_crc_par.r - * id: - * last modfied: Mon Apr 11 16:08:45 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_crc_par_defs.h ../../inst/io_proc/rtl/iop_crc_par.r - * id: $Id: iop_crc_par_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_crc_par */ - -/* Register rw_cfg, scope iop_crc_par, type rw */ -typedef struct { - unsigned int mode : 1; - unsigned int crc_out : 1; - unsigned int rev_out : 1; - unsigned int inv_out : 1; - unsigned int trig : 2; - unsigned int poly : 3; - unsigned int dummy1 : 23; -} reg_iop_crc_par_rw_cfg; -#define REG_RD_ADDR_iop_crc_par_rw_cfg 0 -#define REG_WR_ADDR_iop_crc_par_rw_cfg 0 - -/* Register rw_init_crc, scope iop_crc_par, type rw */ -typedef unsigned int reg_iop_crc_par_rw_init_crc; -#define REG_RD_ADDR_iop_crc_par_rw_init_crc 4 -#define REG_WR_ADDR_iop_crc_par_rw_init_crc 4 - -/* Register rw_correct_crc, scope iop_crc_par, type rw */ -typedef unsigned int reg_iop_crc_par_rw_correct_crc; -#define REG_RD_ADDR_iop_crc_par_rw_correct_crc 8 -#define REG_WR_ADDR_iop_crc_par_rw_correct_crc 8 - -/* Register rw_ctrl, scope iop_crc_par, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int dummy1 : 31; -} reg_iop_crc_par_rw_ctrl; -#define REG_RD_ADDR_iop_crc_par_rw_ctrl 12 -#define REG_WR_ADDR_iop_crc_par_rw_ctrl 12 - -/* Register rw_set_last, scope iop_crc_par, type rw */ -typedef struct { - unsigned int tr_dif : 1; - unsigned int dummy1 : 31; -} reg_iop_crc_par_rw_set_last; -#define REG_RD_ADDR_iop_crc_par_rw_set_last 16 -#define REG_WR_ADDR_iop_crc_par_rw_set_last 16 - -/* Register rw_wr1byte, scope iop_crc_par, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_iop_crc_par_rw_wr1byte; -#define REG_RD_ADDR_iop_crc_par_rw_wr1byte 20 -#define REG_WR_ADDR_iop_crc_par_rw_wr1byte 20 - -/* Register rw_wr2byte, scope iop_crc_par, type rw */ -typedef struct { - unsigned int data : 16; - unsigned int dummy1 : 16; -} reg_iop_crc_par_rw_wr2byte; -#define REG_RD_ADDR_iop_crc_par_rw_wr2byte 24 -#define REG_WR_ADDR_iop_crc_par_rw_wr2byte 24 - -/* Register rw_wr3byte, scope iop_crc_par, type rw */ -typedef struct { - unsigned int data : 24; - unsigned int dummy1 : 8; -} reg_iop_crc_par_rw_wr3byte; -#define REG_RD_ADDR_iop_crc_par_rw_wr3byte 28 -#define REG_WR_ADDR_iop_crc_par_rw_wr3byte 28 - -/* Register rw_wr4byte, scope iop_crc_par, type rw */ -typedef struct { - unsigned int data : 32; -} reg_iop_crc_par_rw_wr4byte; -#define REG_RD_ADDR_iop_crc_par_rw_wr4byte 32 -#define REG_WR_ADDR_iop_crc_par_rw_wr4byte 32 - -/* Register rw_wr1byte_last, scope iop_crc_par, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_iop_crc_par_rw_wr1byte_last; -#define REG_RD_ADDR_iop_crc_par_rw_wr1byte_last 36 -#define REG_WR_ADDR_iop_crc_par_rw_wr1byte_last 36 - -/* Register rw_wr2byte_last, scope iop_crc_par, type rw */ -typedef struct { - unsigned int data : 16; - unsigned int dummy1 : 16; -} reg_iop_crc_par_rw_wr2byte_last; -#define REG_RD_ADDR_iop_crc_par_rw_wr2byte_last 40 -#define REG_WR_ADDR_iop_crc_par_rw_wr2byte_last 40 - -/* Register rw_wr3byte_last, scope iop_crc_par, type rw */ -typedef struct { - unsigned int data : 24; - unsigned int dummy1 : 8; -} reg_iop_crc_par_rw_wr3byte_last; -#define REG_RD_ADDR_iop_crc_par_rw_wr3byte_last 44 -#define REG_WR_ADDR_iop_crc_par_rw_wr3byte_last 44 - -/* Register rw_wr4byte_last, scope iop_crc_par, type rw */ -typedef struct { - unsigned int data : 32; -} reg_iop_crc_par_rw_wr4byte_last; -#define REG_RD_ADDR_iop_crc_par_rw_wr4byte_last 48 -#define REG_WR_ADDR_iop_crc_par_rw_wr4byte_last 48 - -/* Register r_stat, scope iop_crc_par, type r */ -typedef struct { - unsigned int err : 1; - unsigned int busy : 1; - unsigned int dummy1 : 30; -} reg_iop_crc_par_r_stat; -#define REG_RD_ADDR_iop_crc_par_r_stat 52 - -/* Register r_sh_reg, scope iop_crc_par, type r */ -typedef unsigned int reg_iop_crc_par_r_sh_reg; -#define REG_RD_ADDR_iop_crc_par_r_sh_reg 56 - -/* Register r_crc, scope iop_crc_par, type r */ -typedef unsigned int reg_iop_crc_par_r_crc; -#define REG_RD_ADDR_iop_crc_par_r_crc 60 - -/* Register rw_strb_rec_dif_in, scope iop_crc_par, type rw */ -typedef struct { - unsigned int last : 2; - unsigned int dummy1 : 30; -} reg_iop_crc_par_rw_strb_rec_dif_in; -#define REG_RD_ADDR_iop_crc_par_rw_strb_rec_dif_in 64 -#define REG_WR_ADDR_iop_crc_par_rw_strb_rec_dif_in 64 - - -/* Constants */ -enum { - regk_iop_crc_par_calc = 0x00000001, - regk_iop_crc_par_ccitt = 0x00000002, - regk_iop_crc_par_check = 0x00000000, - regk_iop_crc_par_crc16 = 0x00000001, - regk_iop_crc_par_crc32 = 0x00000000, - regk_iop_crc_par_crc5 = 0x00000003, - regk_iop_crc_par_crc5_11 = 0x00000004, - regk_iop_crc_par_dif_in = 0x00000002, - regk_iop_crc_par_hi = 0x00000000, - regk_iop_crc_par_neg = 0x00000002, - regk_iop_crc_par_no = 0x00000000, - regk_iop_crc_par_pos = 0x00000001, - regk_iop_crc_par_pos_neg = 0x00000003, - regk_iop_crc_par_rw_cfg_default = 0x00000000, - regk_iop_crc_par_rw_ctrl_default = 0x00000000, - regk_iop_crc_par_yes = 0x00000001 -}; -#endif /* __iop_crc_par_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h deleted file mode 100644 index 76aec6e37f3e..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h +++ /dev/null @@ -1,325 +0,0 @@ -#ifndef __iop_dmc_in_defs_h -#define __iop_dmc_in_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_dmc_in.r - * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_dmc_in_defs.h ../../inst/io_proc/rtl/iop_dmc_in.r - * id: $Id: iop_dmc_in_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_dmc_in */ - -/* Register rw_cfg, scope iop_dmc_in, type rw */ -typedef struct { - unsigned int sth_intr : 3; - unsigned int last_dis_dif : 1; - unsigned int dummy1 : 28; -} reg_iop_dmc_in_rw_cfg; -#define REG_RD_ADDR_iop_dmc_in_rw_cfg 0 -#define REG_WR_ADDR_iop_dmc_in_rw_cfg 0 - -/* Register rw_ctrl, scope iop_dmc_in, type rw */ -typedef struct { - unsigned int dif_en : 1; - unsigned int dif_dis : 1; - unsigned int stream_clr : 1; - unsigned int dummy1 : 29; -} reg_iop_dmc_in_rw_ctrl; -#define REG_RD_ADDR_iop_dmc_in_rw_ctrl 4 -#define REG_WR_ADDR_iop_dmc_in_rw_ctrl 4 - -/* Register r_stat, scope iop_dmc_in, type r */ -typedef struct { - unsigned int dif_en : 1; - unsigned int dummy1 : 31; -} reg_iop_dmc_in_r_stat; -#define REG_RD_ADDR_iop_dmc_in_r_stat 8 - -/* Register rw_stream_cmd, scope iop_dmc_in, type rw */ -typedef struct { - unsigned int cmd : 10; - unsigned int dummy1 : 6; - unsigned int n : 8; - unsigned int dummy2 : 8; -} reg_iop_dmc_in_rw_stream_cmd; -#define REG_RD_ADDR_iop_dmc_in_rw_stream_cmd 12 -#define REG_WR_ADDR_iop_dmc_in_rw_stream_cmd 12 - -/* Register rw_stream_wr_data, scope iop_dmc_in, type rw */ -typedef unsigned int reg_iop_dmc_in_rw_stream_wr_data; -#define REG_RD_ADDR_iop_dmc_in_rw_stream_wr_data 16 -#define REG_WR_ADDR_iop_dmc_in_rw_stream_wr_data 16 - -/* Register rw_stream_wr_data_last, scope iop_dmc_in, type rw */ -typedef unsigned int reg_iop_dmc_in_rw_stream_wr_data_last; -#define REG_RD_ADDR_iop_dmc_in_rw_stream_wr_data_last 20 -#define REG_WR_ADDR_iop_dmc_in_rw_stream_wr_data_last 20 - -/* Register rw_stream_ctrl, scope iop_dmc_in, type rw */ -typedef struct { - unsigned int eop : 1; - unsigned int wait : 1; - unsigned int keep_md : 1; - unsigned int size : 3; - unsigned int dummy1 : 26; -} reg_iop_dmc_in_rw_stream_ctrl; -#define REG_RD_ADDR_iop_dmc_in_rw_stream_ctrl 24 -#define REG_WR_ADDR_iop_dmc_in_rw_stream_ctrl 24 - -/* Register r_stream_stat, scope iop_dmc_in, type r */ -typedef struct { - unsigned int sth : 7; - unsigned int dummy1 : 9; - unsigned int full : 1; - unsigned int last_pkt : 1; - unsigned int data_md_valid : 1; - unsigned int ctxt_md_valid : 1; - unsigned int group_md_valid : 1; - unsigned int stream_busy : 1; - unsigned int cmd_rdy : 1; - unsigned int dummy2 : 9; -} reg_iop_dmc_in_r_stream_stat; -#define REG_RD_ADDR_iop_dmc_in_r_stream_stat 28 - -/* Register r_data_descr, scope iop_dmc_in, type r */ -typedef struct { - unsigned int ctrl : 8; - unsigned int stat : 8; - unsigned int md : 16; -} reg_iop_dmc_in_r_data_descr; -#define REG_RD_ADDR_iop_dmc_in_r_data_descr 32 - -/* Register r_ctxt_descr, scope iop_dmc_in, type r */ -typedef struct { - unsigned int ctrl : 8; - unsigned int stat : 8; - unsigned int md0 : 16; -} reg_iop_dmc_in_r_ctxt_descr; -#define REG_RD_ADDR_iop_dmc_in_r_ctxt_descr 36 - -/* Register r_ctxt_descr_md1, scope iop_dmc_in, type r */ -typedef unsigned int reg_iop_dmc_in_r_ctxt_descr_md1; -#define REG_RD_ADDR_iop_dmc_in_r_ctxt_descr_md1 40 - -/* Register r_ctxt_descr_md2, scope iop_dmc_in, type r */ -typedef unsigned int reg_iop_dmc_in_r_ctxt_descr_md2; -#define REG_RD_ADDR_iop_dmc_in_r_ctxt_descr_md2 44 - -/* Register r_group_descr, scope iop_dmc_in, type r */ -typedef struct { - unsigned int ctrl : 8; - unsigned int stat : 8; - unsigned int md : 16; -} reg_iop_dmc_in_r_group_descr; -#define REG_RD_ADDR_iop_dmc_in_r_group_descr 56 - -/* Register rw_data_descr, scope iop_dmc_in, type rw */ -typedef struct { - unsigned int dummy1 : 16; - unsigned int md : 16; -} reg_iop_dmc_in_rw_data_descr; -#define REG_RD_ADDR_iop_dmc_in_rw_data_descr 60 -#define REG_WR_ADDR_iop_dmc_in_rw_data_descr 60 - -/* Register rw_ctxt_descr, scope iop_dmc_in, type rw */ -typedef struct { - unsigned int dummy1 : 16; - unsigned int md0 : 16; -} reg_iop_dmc_in_rw_ctxt_descr; -#define REG_RD_ADDR_iop_dmc_in_rw_ctxt_descr 64 -#define REG_WR_ADDR_iop_dmc_in_rw_ctxt_descr 64 - -/* Register rw_ctxt_descr_md1, scope iop_dmc_in, type rw */ -typedef unsigned int reg_iop_dmc_in_rw_ctxt_descr_md1; -#define REG_RD_ADDR_iop_dmc_in_rw_ctxt_descr_md1 68 -#define REG_WR_ADDR_iop_dmc_in_rw_ctxt_descr_md1 68 - -/* Register rw_ctxt_descr_md2, scope iop_dmc_in, type rw */ -typedef unsigned int reg_iop_dmc_in_rw_ctxt_descr_md2; -#define REG_RD_ADDR_iop_dmc_in_rw_ctxt_descr_md2 72 -#define REG_WR_ADDR_iop_dmc_in_rw_ctxt_descr_md2 72 - -/* Register rw_group_descr, scope iop_dmc_in, type rw */ -typedef struct { - unsigned int dummy1 : 16; - unsigned int md : 16; -} reg_iop_dmc_in_rw_group_descr; -#define REG_RD_ADDR_iop_dmc_in_rw_group_descr 84 -#define REG_WR_ADDR_iop_dmc_in_rw_group_descr 84 - -/* Register rw_intr_mask, scope iop_dmc_in, type rw */ -typedef struct { - unsigned int data_md : 1; - unsigned int ctxt_md : 1; - unsigned int group_md : 1; - unsigned int cmd_rdy : 1; - unsigned int sth : 1; - unsigned int full : 1; - unsigned int dummy1 : 26; -} reg_iop_dmc_in_rw_intr_mask; -#define REG_RD_ADDR_iop_dmc_in_rw_intr_mask 88 -#define REG_WR_ADDR_iop_dmc_in_rw_intr_mask 88 - -/* Register rw_ack_intr, scope iop_dmc_in, type rw */ -typedef struct { - unsigned int data_md : 1; - unsigned int ctxt_md : 1; - unsigned int group_md : 1; - unsigned int cmd_rdy : 1; - unsigned int sth : 1; - unsigned int full : 1; - unsigned int dummy1 : 26; -} reg_iop_dmc_in_rw_ack_intr; -#define REG_RD_ADDR_iop_dmc_in_rw_ack_intr 92 -#define REG_WR_ADDR_iop_dmc_in_rw_ack_intr 92 - -/* Register r_intr, scope iop_dmc_in, type r */ -typedef struct { - unsigned int data_md : 1; - unsigned int ctxt_md : 1; - unsigned int group_md : 1; - unsigned int cmd_rdy : 1; - unsigned int sth : 1; - unsigned int full : 1; - unsigned int dummy1 : 26; -} reg_iop_dmc_in_r_intr; -#define REG_RD_ADDR_iop_dmc_in_r_intr 96 - -/* Register r_masked_intr, scope iop_dmc_in, type r */ -typedef struct { - unsigned int data_md : 1; - unsigned int ctxt_md : 1; - unsigned int group_md : 1; - unsigned int cmd_rdy : 1; - unsigned int sth : 1; - unsigned int full : 1; - unsigned int dummy1 : 26; -} reg_iop_dmc_in_r_masked_intr; -#define REG_RD_ADDR_iop_dmc_in_r_masked_intr 100 - - -/* Constants */ -enum { - regk_iop_dmc_in_ack_pkt = 0x00000100, - regk_iop_dmc_in_array = 0x00000008, - regk_iop_dmc_in_burst = 0x00000020, - regk_iop_dmc_in_copy_next = 0x00000010, - regk_iop_dmc_in_copy_up = 0x00000020, - regk_iop_dmc_in_dis_c = 0x00000010, - regk_iop_dmc_in_dis_g = 0x00000020, - regk_iop_dmc_in_lim1 = 0x00000000, - regk_iop_dmc_in_lim16 = 0x00000004, - regk_iop_dmc_in_lim2 = 0x00000001, - regk_iop_dmc_in_lim32 = 0x00000005, - regk_iop_dmc_in_lim4 = 0x00000002, - regk_iop_dmc_in_lim64 = 0x00000006, - regk_iop_dmc_in_lim8 = 0x00000003, - regk_iop_dmc_in_load_c = 0x00000200, - regk_iop_dmc_in_load_c_n = 0x00000280, - regk_iop_dmc_in_load_c_next = 0x00000240, - regk_iop_dmc_in_load_d = 0x00000140, - regk_iop_dmc_in_load_g = 0x00000300, - regk_iop_dmc_in_load_g_down = 0x000003c0, - regk_iop_dmc_in_load_g_next = 0x00000340, - regk_iop_dmc_in_load_g_up = 0x00000380, - regk_iop_dmc_in_next_en = 0x00000010, - regk_iop_dmc_in_next_pkt = 0x00000010, - regk_iop_dmc_in_no = 0x00000000, - regk_iop_dmc_in_restore = 0x00000020, - regk_iop_dmc_in_rw_cfg_default = 0x00000000, - regk_iop_dmc_in_rw_ctxt_descr_default = 0x00000000, - regk_iop_dmc_in_rw_ctxt_descr_md1_default = 0x00000000, - regk_iop_dmc_in_rw_ctxt_descr_md2_default = 0x00000000, - regk_iop_dmc_in_rw_data_descr_default = 0x00000000, - regk_iop_dmc_in_rw_group_descr_default = 0x00000000, - regk_iop_dmc_in_rw_intr_mask_default = 0x00000000, - regk_iop_dmc_in_rw_stream_ctrl_default = 0x00000000, - regk_iop_dmc_in_save_down = 0x00000020, - regk_iop_dmc_in_save_up = 0x00000020, - regk_iop_dmc_in_set_reg = 0x00000050, - regk_iop_dmc_in_set_w_size1 = 0x00000190, - regk_iop_dmc_in_set_w_size2 = 0x000001a0, - regk_iop_dmc_in_set_w_size4 = 0x000001c0, - regk_iop_dmc_in_store_c = 0x00000002, - regk_iop_dmc_in_store_descr = 0x00000000, - regk_iop_dmc_in_store_g = 0x00000004, - regk_iop_dmc_in_store_md = 0x00000001, - regk_iop_dmc_in_update_down = 0x00000020, - regk_iop_dmc_in_yes = 0x00000001 -}; -#endif /* __iop_dmc_in_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h deleted file mode 100644 index 938a0d4c4604..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h +++ /dev/null @@ -1,326 +0,0 @@ -#ifndef __iop_dmc_out_defs_h -#define __iop_dmc_out_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_dmc_out.r - * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_dmc_out_defs.h ../../inst/io_proc/rtl/iop_dmc_out.r - * id: $Id: iop_dmc_out_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_dmc_out */ - -/* Register rw_cfg, scope iop_dmc_out, type rw */ -typedef struct { - unsigned int trf_lim : 16; - unsigned int last_at_trf_lim : 1; - unsigned int dth_intr : 3; - unsigned int dummy1 : 12; -} reg_iop_dmc_out_rw_cfg; -#define REG_RD_ADDR_iop_dmc_out_rw_cfg 0 -#define REG_WR_ADDR_iop_dmc_out_rw_cfg 0 - -/* Register rw_ctrl, scope iop_dmc_out, type rw */ -typedef struct { - unsigned int dif_en : 1; - unsigned int dif_dis : 1; - unsigned int dummy1 : 30; -} reg_iop_dmc_out_rw_ctrl; -#define REG_RD_ADDR_iop_dmc_out_rw_ctrl 4 -#define REG_WR_ADDR_iop_dmc_out_rw_ctrl 4 - -/* Register r_stat, scope iop_dmc_out, type r */ -typedef struct { - unsigned int dif_en : 1; - unsigned int dummy1 : 31; -} reg_iop_dmc_out_r_stat; -#define REG_RD_ADDR_iop_dmc_out_r_stat 8 - -/* Register rw_stream_cmd, scope iop_dmc_out, type rw */ -typedef struct { - unsigned int cmd : 10; - unsigned int dummy1 : 6; - unsigned int n : 8; - unsigned int dummy2 : 8; -} reg_iop_dmc_out_rw_stream_cmd; -#define REG_RD_ADDR_iop_dmc_out_rw_stream_cmd 12 -#define REG_WR_ADDR_iop_dmc_out_rw_stream_cmd 12 - -/* Register rs_stream_data, scope iop_dmc_out, type rs */ -typedef unsigned int reg_iop_dmc_out_rs_stream_data; -#define REG_RD_ADDR_iop_dmc_out_rs_stream_data 16 - -/* Register r_stream_data, scope iop_dmc_out, type r */ -typedef unsigned int reg_iop_dmc_out_r_stream_data; -#define REG_RD_ADDR_iop_dmc_out_r_stream_data 20 - -/* Register r_stream_stat, scope iop_dmc_out, type r */ -typedef struct { - unsigned int dth : 7; - unsigned int dummy1 : 9; - unsigned int dv : 1; - unsigned int all_avail : 1; - unsigned int last : 1; - unsigned int size : 3; - unsigned int data_md_valid : 1; - unsigned int ctxt_md_valid : 1; - unsigned int group_md_valid : 1; - unsigned int stream_busy : 1; - unsigned int cmd_rdy : 1; - unsigned int cmd_rq : 1; - unsigned int dummy2 : 4; -} reg_iop_dmc_out_r_stream_stat; -#define REG_RD_ADDR_iop_dmc_out_r_stream_stat 24 - -/* Register r_data_descr, scope iop_dmc_out, type r */ -typedef struct { - unsigned int ctrl : 8; - unsigned int stat : 8; - unsigned int md : 16; -} reg_iop_dmc_out_r_data_descr; -#define REG_RD_ADDR_iop_dmc_out_r_data_descr 28 - -/* Register r_ctxt_descr, scope iop_dmc_out, type r */ -typedef struct { - unsigned int ctrl : 8; - unsigned int stat : 8; - unsigned int md0 : 16; -} reg_iop_dmc_out_r_ctxt_descr; -#define REG_RD_ADDR_iop_dmc_out_r_ctxt_descr 32 - -/* Register r_ctxt_descr_md1, scope iop_dmc_out, type r */ -typedef unsigned int reg_iop_dmc_out_r_ctxt_descr_md1; -#define REG_RD_ADDR_iop_dmc_out_r_ctxt_descr_md1 36 - -/* Register r_ctxt_descr_md2, scope iop_dmc_out, type r */ -typedef unsigned int reg_iop_dmc_out_r_ctxt_descr_md2; -#define REG_RD_ADDR_iop_dmc_out_r_ctxt_descr_md2 40 - -/* Register r_group_descr, scope iop_dmc_out, type r */ -typedef struct { - unsigned int ctrl : 8; - unsigned int stat : 8; - unsigned int md : 16; -} reg_iop_dmc_out_r_group_descr; -#define REG_RD_ADDR_iop_dmc_out_r_group_descr 52 - -/* Register rw_data_descr, scope iop_dmc_out, type rw */ -typedef struct { - unsigned int dummy1 : 16; - unsigned int md : 16; -} reg_iop_dmc_out_rw_data_descr; -#define REG_RD_ADDR_iop_dmc_out_rw_data_descr 56 -#define REG_WR_ADDR_iop_dmc_out_rw_data_descr 56 - -/* Register rw_ctxt_descr, scope iop_dmc_out, type rw */ -typedef struct { - unsigned int dummy1 : 16; - unsigned int md0 : 16; -} reg_iop_dmc_out_rw_ctxt_descr; -#define REG_RD_ADDR_iop_dmc_out_rw_ctxt_descr 60 -#define REG_WR_ADDR_iop_dmc_out_rw_ctxt_descr 60 - -/* Register rw_ctxt_descr_md1, scope iop_dmc_out, type rw */ -typedef unsigned int reg_iop_dmc_out_rw_ctxt_descr_md1; -#define REG_RD_ADDR_iop_dmc_out_rw_ctxt_descr_md1 64 -#define REG_WR_ADDR_iop_dmc_out_rw_ctxt_descr_md1 64 - -/* Register rw_ctxt_descr_md2, scope iop_dmc_out, type rw */ -typedef unsigned int reg_iop_dmc_out_rw_ctxt_descr_md2; -#define REG_RD_ADDR_iop_dmc_out_rw_ctxt_descr_md2 68 -#define REG_WR_ADDR_iop_dmc_out_rw_ctxt_descr_md2 68 - -/* Register rw_group_descr, scope iop_dmc_out, type rw */ -typedef struct { - unsigned int dummy1 : 16; - unsigned int md : 16; -} reg_iop_dmc_out_rw_group_descr; -#define REG_RD_ADDR_iop_dmc_out_rw_group_descr 80 -#define REG_WR_ADDR_iop_dmc_out_rw_group_descr 80 - -/* Register rw_intr_mask, scope iop_dmc_out, type rw */ -typedef struct { - unsigned int data_md : 1; - unsigned int ctxt_md : 1; - unsigned int group_md : 1; - unsigned int cmd_rdy : 1; - unsigned int dth : 1; - unsigned int dv : 1; - unsigned int last_data : 1; - unsigned int trf_lim : 1; - unsigned int cmd_rq : 1; - unsigned int dummy1 : 23; -} reg_iop_dmc_out_rw_intr_mask; -#define REG_RD_ADDR_iop_dmc_out_rw_intr_mask 84 -#define REG_WR_ADDR_iop_dmc_out_rw_intr_mask 84 - -/* Register rw_ack_intr, scope iop_dmc_out, type rw */ -typedef struct { - unsigned int data_md : 1; - unsigned int ctxt_md : 1; - unsigned int group_md : 1; - unsigned int cmd_rdy : 1; - unsigned int dth : 1; - unsigned int dv : 1; - unsigned int last_data : 1; - unsigned int trf_lim : 1; - unsigned int cmd_rq : 1; - unsigned int dummy1 : 23; -} reg_iop_dmc_out_rw_ack_intr; -#define REG_RD_ADDR_iop_dmc_out_rw_ack_intr 88 -#define REG_WR_ADDR_iop_dmc_out_rw_ack_intr 88 - -/* Register r_intr, scope iop_dmc_out, type r */ -typedef struct { - unsigned int data_md : 1; - unsigned int ctxt_md : 1; - unsigned int group_md : 1; - unsigned int cmd_rdy : 1; - unsigned int dth : 1; - unsigned int dv : 1; - unsigned int last_data : 1; - unsigned int trf_lim : 1; - unsigned int cmd_rq : 1; - unsigned int dummy1 : 23; -} reg_iop_dmc_out_r_intr; -#define REG_RD_ADDR_iop_dmc_out_r_intr 92 - -/* Register r_masked_intr, scope iop_dmc_out, type r */ -typedef struct { - unsigned int data_md : 1; - unsigned int ctxt_md : 1; - unsigned int group_md : 1; - unsigned int cmd_rdy : 1; - unsigned int dth : 1; - unsigned int dv : 1; - unsigned int last_data : 1; - unsigned int trf_lim : 1; - unsigned int cmd_rq : 1; - unsigned int dummy1 : 23; -} reg_iop_dmc_out_r_masked_intr; -#define REG_RD_ADDR_iop_dmc_out_r_masked_intr 96 - - -/* Constants */ -enum { - regk_iop_dmc_out_ack_pkt = 0x00000100, - regk_iop_dmc_out_array = 0x00000008, - regk_iop_dmc_out_burst = 0x00000020, - regk_iop_dmc_out_copy_next = 0x00000010, - regk_iop_dmc_out_copy_up = 0x00000020, - regk_iop_dmc_out_dis_c = 0x00000010, - regk_iop_dmc_out_dis_g = 0x00000020, - regk_iop_dmc_out_lim1 = 0x00000000, - regk_iop_dmc_out_lim16 = 0x00000004, - regk_iop_dmc_out_lim2 = 0x00000001, - regk_iop_dmc_out_lim32 = 0x00000005, - regk_iop_dmc_out_lim4 = 0x00000002, - regk_iop_dmc_out_lim64 = 0x00000006, - regk_iop_dmc_out_lim8 = 0x00000003, - regk_iop_dmc_out_load_c = 0x00000200, - regk_iop_dmc_out_load_c_n = 0x00000280, - regk_iop_dmc_out_load_c_next = 0x00000240, - regk_iop_dmc_out_load_d = 0x00000140, - regk_iop_dmc_out_load_g = 0x00000300, - regk_iop_dmc_out_load_g_down = 0x000003c0, - regk_iop_dmc_out_load_g_next = 0x00000340, - regk_iop_dmc_out_load_g_up = 0x00000380, - regk_iop_dmc_out_next_en = 0x00000010, - regk_iop_dmc_out_next_pkt = 0x00000010, - regk_iop_dmc_out_no = 0x00000000, - regk_iop_dmc_out_restore = 0x00000020, - regk_iop_dmc_out_rw_cfg_default = 0x00000000, - regk_iop_dmc_out_rw_ctxt_descr_default = 0x00000000, - regk_iop_dmc_out_rw_ctxt_descr_md1_default = 0x00000000, - regk_iop_dmc_out_rw_ctxt_descr_md2_default = 0x00000000, - regk_iop_dmc_out_rw_data_descr_default = 0x00000000, - regk_iop_dmc_out_rw_group_descr_default = 0x00000000, - regk_iop_dmc_out_rw_intr_mask_default = 0x00000000, - regk_iop_dmc_out_save_down = 0x00000020, - regk_iop_dmc_out_save_up = 0x00000020, - regk_iop_dmc_out_set_reg = 0x00000050, - regk_iop_dmc_out_set_w_size1 = 0x00000190, - regk_iop_dmc_out_set_w_size2 = 0x000001a0, - regk_iop_dmc_out_set_w_size4 = 0x000001c0, - regk_iop_dmc_out_store_c = 0x00000002, - regk_iop_dmc_out_store_descr = 0x00000000, - regk_iop_dmc_out_store_g = 0x00000004, - regk_iop_dmc_out_store_md = 0x00000001, - regk_iop_dmc_out_update_down = 0x00000020, - regk_iop_dmc_out_yes = 0x00000001 -}; -#endif /* __iop_dmc_out_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h deleted file mode 100644 index e0c982b263fa..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h +++ /dev/null @@ -1,255 +0,0 @@ -#ifndef __iop_fifo_in_defs_h -#define __iop_fifo_in_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_fifo_in.r - * id: - * last modfied: Mon Apr 11 16:10:07 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_in_defs.h ../../inst/io_proc/rtl/iop_fifo_in.r - * id: $Id: iop_fifo_in_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_fifo_in */ - -/* Register rw_cfg, scope iop_fifo_in, type rw */ -typedef struct { - unsigned int avail_lim : 3; - unsigned int byte_order : 2; - unsigned int trig : 2; - unsigned int last_dis_dif_in : 1; - unsigned int mode : 2; - unsigned int dummy1 : 22; -} reg_iop_fifo_in_rw_cfg; -#define REG_RD_ADDR_iop_fifo_in_rw_cfg 0 -#define REG_WR_ADDR_iop_fifo_in_rw_cfg 0 - -/* Register rw_ctrl, scope iop_fifo_in, type rw */ -typedef struct { - unsigned int dif_in_en : 1; - unsigned int dif_out_en : 1; - unsigned int dummy1 : 30; -} reg_iop_fifo_in_rw_ctrl; -#define REG_RD_ADDR_iop_fifo_in_rw_ctrl 4 -#define REG_WR_ADDR_iop_fifo_in_rw_ctrl 4 - -/* Register r_stat, scope iop_fifo_in, type r */ -typedef struct { - unsigned int avail_bytes : 4; - unsigned int last : 8; - unsigned int dif_in_en : 1; - unsigned int dif_out_en : 1; - unsigned int dummy1 : 18; -} reg_iop_fifo_in_r_stat; -#define REG_RD_ADDR_iop_fifo_in_r_stat 8 - -/* Register rs_rd1byte, scope iop_fifo_in, type rs */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_iop_fifo_in_rs_rd1byte; -#define REG_RD_ADDR_iop_fifo_in_rs_rd1byte 12 - -/* Register r_rd1byte, scope iop_fifo_in, type r */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_iop_fifo_in_r_rd1byte; -#define REG_RD_ADDR_iop_fifo_in_r_rd1byte 16 - -/* Register rs_rd2byte, scope iop_fifo_in, type rs */ -typedef struct { - unsigned int data : 16; - unsigned int dummy1 : 16; -} reg_iop_fifo_in_rs_rd2byte; -#define REG_RD_ADDR_iop_fifo_in_rs_rd2byte 20 - -/* Register r_rd2byte, scope iop_fifo_in, type r */ -typedef struct { - unsigned int data : 16; - unsigned int dummy1 : 16; -} reg_iop_fifo_in_r_rd2byte; -#define REG_RD_ADDR_iop_fifo_in_r_rd2byte 24 - -/* Register rs_rd3byte, scope iop_fifo_in, type rs */ -typedef struct { - unsigned int data : 24; - unsigned int dummy1 : 8; -} reg_iop_fifo_in_rs_rd3byte; -#define REG_RD_ADDR_iop_fifo_in_rs_rd3byte 28 - -/* Register r_rd3byte, scope iop_fifo_in, type r */ -typedef struct { - unsigned int data : 24; - unsigned int dummy1 : 8; -} reg_iop_fifo_in_r_rd3byte; -#define REG_RD_ADDR_iop_fifo_in_r_rd3byte 32 - -/* Register rs_rd4byte, scope iop_fifo_in, type rs */ -typedef struct { - unsigned int data : 32; -} reg_iop_fifo_in_rs_rd4byte; -#define REG_RD_ADDR_iop_fifo_in_rs_rd4byte 36 - -/* Register r_rd4byte, scope iop_fifo_in, type r */ -typedef struct { - unsigned int data : 32; -} reg_iop_fifo_in_r_rd4byte; -#define REG_RD_ADDR_iop_fifo_in_r_rd4byte 40 - -/* Register rw_set_last, scope iop_fifo_in, type rw */ -typedef unsigned int reg_iop_fifo_in_rw_set_last; -#define REG_RD_ADDR_iop_fifo_in_rw_set_last 44 -#define REG_WR_ADDR_iop_fifo_in_rw_set_last 44 - -/* Register rw_strb_dif_in, scope iop_fifo_in, type rw */ -typedef struct { - unsigned int last : 2; - unsigned int dummy1 : 30; -} reg_iop_fifo_in_rw_strb_dif_in; -#define REG_RD_ADDR_iop_fifo_in_rw_strb_dif_in 48 -#define REG_WR_ADDR_iop_fifo_in_rw_strb_dif_in 48 - -/* Register rw_intr_mask, scope iop_fifo_in, type rw */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int avail : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_in_rw_intr_mask; -#define REG_RD_ADDR_iop_fifo_in_rw_intr_mask 52 -#define REG_WR_ADDR_iop_fifo_in_rw_intr_mask 52 - -/* Register rw_ack_intr, scope iop_fifo_in, type rw */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int avail : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_in_rw_ack_intr; -#define REG_RD_ADDR_iop_fifo_in_rw_ack_intr 56 -#define REG_WR_ADDR_iop_fifo_in_rw_ack_intr 56 - -/* Register r_intr, scope iop_fifo_in, type r */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int avail : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_in_r_intr; -#define REG_RD_ADDR_iop_fifo_in_r_intr 60 - -/* Register r_masked_intr, scope iop_fifo_in, type r */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int avail : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_in_r_masked_intr; -#define REG_RD_ADDR_iop_fifo_in_r_masked_intr 64 - - -/* Constants */ -enum { - regk_iop_fifo_in_dif_in = 0x00000002, - regk_iop_fifo_in_hi = 0x00000000, - regk_iop_fifo_in_neg = 0x00000002, - regk_iop_fifo_in_no = 0x00000000, - regk_iop_fifo_in_order16 = 0x00000001, - regk_iop_fifo_in_order24 = 0x00000002, - regk_iop_fifo_in_order32 = 0x00000003, - regk_iop_fifo_in_order8 = 0x00000000, - regk_iop_fifo_in_pos = 0x00000001, - regk_iop_fifo_in_pos_neg = 0x00000003, - regk_iop_fifo_in_rw_cfg_default = 0x00000024, - regk_iop_fifo_in_rw_ctrl_default = 0x00000000, - regk_iop_fifo_in_rw_intr_mask_default = 0x00000000, - regk_iop_fifo_in_rw_set_last_default = 0x00000000, - regk_iop_fifo_in_rw_strb_dif_in_default = 0x00000000, - regk_iop_fifo_in_size16 = 0x00000002, - regk_iop_fifo_in_size24 = 0x00000001, - regk_iop_fifo_in_size32 = 0x00000000, - regk_iop_fifo_in_size8 = 0x00000003, - regk_iop_fifo_in_yes = 0x00000001 -}; -#endif /* __iop_fifo_in_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h deleted file mode 100644 index 798ac95870e9..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef __iop_fifo_in_extra_defs_h -#define __iop_fifo_in_extra_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_fifo_in_extra.r - * id: - * last modfied: Mon Apr 11 16:10:08 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_in_extra_defs.h ../../inst/io_proc/rtl/iop_fifo_in_extra.r - * id: $Id: iop_fifo_in_extra_defs.h,v 1.1 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_fifo_in_extra */ - -/* Register rw_wr_data, scope iop_fifo_in_extra, type rw */ -typedef unsigned int reg_iop_fifo_in_extra_rw_wr_data; -#define REG_RD_ADDR_iop_fifo_in_extra_rw_wr_data 0 -#define REG_WR_ADDR_iop_fifo_in_extra_rw_wr_data 0 - -/* Register r_stat, scope iop_fifo_in_extra, type r */ -typedef struct { - unsigned int avail_bytes : 4; - unsigned int last : 8; - unsigned int dif_in_en : 1; - unsigned int dif_out_en : 1; - unsigned int dummy1 : 18; -} reg_iop_fifo_in_extra_r_stat; -#define REG_RD_ADDR_iop_fifo_in_extra_r_stat 4 - -/* Register rw_strb_dif_in, scope iop_fifo_in_extra, type rw */ -typedef struct { - unsigned int last : 2; - unsigned int dummy1 : 30; -} reg_iop_fifo_in_extra_rw_strb_dif_in; -#define REG_RD_ADDR_iop_fifo_in_extra_rw_strb_dif_in 8 -#define REG_WR_ADDR_iop_fifo_in_extra_rw_strb_dif_in 8 - -/* Register rw_intr_mask, scope iop_fifo_in_extra, type rw */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int avail : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_in_extra_rw_intr_mask; -#define REG_RD_ADDR_iop_fifo_in_extra_rw_intr_mask 12 -#define REG_WR_ADDR_iop_fifo_in_extra_rw_intr_mask 12 - -/* Register rw_ack_intr, scope iop_fifo_in_extra, type rw */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int avail : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_in_extra_rw_ack_intr; -#define REG_RD_ADDR_iop_fifo_in_extra_rw_ack_intr 16 -#define REG_WR_ADDR_iop_fifo_in_extra_rw_ack_intr 16 - -/* Register r_intr, scope iop_fifo_in_extra, type r */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int avail : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_in_extra_r_intr; -#define REG_RD_ADDR_iop_fifo_in_extra_r_intr 20 - -/* Register r_masked_intr, scope iop_fifo_in_extra, type r */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int avail : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_in_extra_r_masked_intr; -#define REG_RD_ADDR_iop_fifo_in_extra_r_masked_intr 24 - - -/* Constants */ -enum { - regk_iop_fifo_in_extra_fifo_in = 0x00000002, - regk_iop_fifo_in_extra_no = 0x00000000, - regk_iop_fifo_in_extra_rw_intr_mask_default = 0x00000000, - regk_iop_fifo_in_extra_yes = 0x00000001 -}; -#endif /* __iop_fifo_in_extra_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h deleted file mode 100644 index 833e10f02526..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h +++ /dev/null @@ -1,278 +0,0 @@ -#ifndef __iop_fifo_out_defs_h -#define __iop_fifo_out_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_fifo_out.r - * id: - * last modfied: Mon Apr 11 16:10:09 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_out_defs.h ../../inst/io_proc/rtl/iop_fifo_out.r - * id: $Id: iop_fifo_out_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_fifo_out */ - -/* Register rw_cfg, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int free_lim : 3; - unsigned int byte_order : 2; - unsigned int trig : 2; - unsigned int last_dis_dif_in : 1; - unsigned int mode : 2; - unsigned int delay_out_last : 1; - unsigned int last_dis_dif_out : 1; - unsigned int dummy1 : 20; -} reg_iop_fifo_out_rw_cfg; -#define REG_RD_ADDR_iop_fifo_out_rw_cfg 0 -#define REG_WR_ADDR_iop_fifo_out_rw_cfg 0 - -/* Register rw_ctrl, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int dif_in_en : 1; - unsigned int dif_out_en : 1; - unsigned int dummy1 : 30; -} reg_iop_fifo_out_rw_ctrl; -#define REG_RD_ADDR_iop_fifo_out_rw_ctrl 4 -#define REG_WR_ADDR_iop_fifo_out_rw_ctrl 4 - -/* Register r_stat, scope iop_fifo_out, type r */ -typedef struct { - unsigned int avail_bytes : 4; - unsigned int last : 8; - unsigned int dif_in_en : 1; - unsigned int dif_out_en : 1; - unsigned int zero_data_last : 1; - unsigned int dummy1 : 17; -} reg_iop_fifo_out_r_stat; -#define REG_RD_ADDR_iop_fifo_out_r_stat 8 - -/* Register rw_wr1byte, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_iop_fifo_out_rw_wr1byte; -#define REG_RD_ADDR_iop_fifo_out_rw_wr1byte 12 -#define REG_WR_ADDR_iop_fifo_out_rw_wr1byte 12 - -/* Register rw_wr2byte, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int data : 16; - unsigned int dummy1 : 16; -} reg_iop_fifo_out_rw_wr2byte; -#define REG_RD_ADDR_iop_fifo_out_rw_wr2byte 16 -#define REG_WR_ADDR_iop_fifo_out_rw_wr2byte 16 - -/* Register rw_wr3byte, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int data : 24; - unsigned int dummy1 : 8; -} reg_iop_fifo_out_rw_wr3byte; -#define REG_RD_ADDR_iop_fifo_out_rw_wr3byte 20 -#define REG_WR_ADDR_iop_fifo_out_rw_wr3byte 20 - -/* Register rw_wr4byte, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int data : 32; -} reg_iop_fifo_out_rw_wr4byte; -#define REG_RD_ADDR_iop_fifo_out_rw_wr4byte 24 -#define REG_WR_ADDR_iop_fifo_out_rw_wr4byte 24 - -/* Register rw_wr1byte_last, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_iop_fifo_out_rw_wr1byte_last; -#define REG_RD_ADDR_iop_fifo_out_rw_wr1byte_last 28 -#define REG_WR_ADDR_iop_fifo_out_rw_wr1byte_last 28 - -/* Register rw_wr2byte_last, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int data : 16; - unsigned int dummy1 : 16; -} reg_iop_fifo_out_rw_wr2byte_last; -#define REG_RD_ADDR_iop_fifo_out_rw_wr2byte_last 32 -#define REG_WR_ADDR_iop_fifo_out_rw_wr2byte_last 32 - -/* Register rw_wr3byte_last, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int data : 24; - unsigned int dummy1 : 8; -} reg_iop_fifo_out_rw_wr3byte_last; -#define REG_RD_ADDR_iop_fifo_out_rw_wr3byte_last 36 -#define REG_WR_ADDR_iop_fifo_out_rw_wr3byte_last 36 - -/* Register rw_wr4byte_last, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int data : 32; -} reg_iop_fifo_out_rw_wr4byte_last; -#define REG_RD_ADDR_iop_fifo_out_rw_wr4byte_last 40 -#define REG_WR_ADDR_iop_fifo_out_rw_wr4byte_last 40 - -/* Register rw_set_last, scope iop_fifo_out, type rw */ -typedef unsigned int reg_iop_fifo_out_rw_set_last; -#define REG_RD_ADDR_iop_fifo_out_rw_set_last 44 -#define REG_WR_ADDR_iop_fifo_out_rw_set_last 44 - -/* Register rs_rd_data, scope iop_fifo_out, type rs */ -typedef unsigned int reg_iop_fifo_out_rs_rd_data; -#define REG_RD_ADDR_iop_fifo_out_rs_rd_data 48 - -/* Register r_rd_data, scope iop_fifo_out, type r */ -typedef unsigned int reg_iop_fifo_out_r_rd_data; -#define REG_RD_ADDR_iop_fifo_out_r_rd_data 52 - -/* Register rw_strb_dif_out, scope iop_fifo_out, type rw */ -typedef unsigned int reg_iop_fifo_out_rw_strb_dif_out; -#define REG_RD_ADDR_iop_fifo_out_rw_strb_dif_out 56 -#define REG_WR_ADDR_iop_fifo_out_rw_strb_dif_out 56 - -/* Register rw_intr_mask, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int free : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_out_rw_intr_mask; -#define REG_RD_ADDR_iop_fifo_out_rw_intr_mask 60 -#define REG_WR_ADDR_iop_fifo_out_rw_intr_mask 60 - -/* Register rw_ack_intr, scope iop_fifo_out, type rw */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int free : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_out_rw_ack_intr; -#define REG_RD_ADDR_iop_fifo_out_rw_ack_intr 64 -#define REG_WR_ADDR_iop_fifo_out_rw_ack_intr 64 - -/* Register r_intr, scope iop_fifo_out, type r */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int free : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_out_r_intr; -#define REG_RD_ADDR_iop_fifo_out_r_intr 68 - -/* Register r_masked_intr, scope iop_fifo_out, type r */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int free : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_out_r_masked_intr; -#define REG_RD_ADDR_iop_fifo_out_r_masked_intr 72 - - -/* Constants */ -enum { - regk_iop_fifo_out_hi = 0x00000000, - regk_iop_fifo_out_neg = 0x00000002, - regk_iop_fifo_out_no = 0x00000000, - regk_iop_fifo_out_order16 = 0x00000001, - regk_iop_fifo_out_order24 = 0x00000002, - regk_iop_fifo_out_order32 = 0x00000003, - regk_iop_fifo_out_order8 = 0x00000000, - regk_iop_fifo_out_pos = 0x00000001, - regk_iop_fifo_out_pos_neg = 0x00000003, - regk_iop_fifo_out_rw_cfg_default = 0x00000024, - regk_iop_fifo_out_rw_ctrl_default = 0x00000000, - regk_iop_fifo_out_rw_intr_mask_default = 0x00000000, - regk_iop_fifo_out_rw_set_last_default = 0x00000000, - regk_iop_fifo_out_rw_strb_dif_out_default = 0x00000000, - regk_iop_fifo_out_rw_wr1byte_default = 0x00000000, - regk_iop_fifo_out_rw_wr1byte_last_default = 0x00000000, - regk_iop_fifo_out_rw_wr2byte_default = 0x00000000, - regk_iop_fifo_out_rw_wr2byte_last_default = 0x00000000, - regk_iop_fifo_out_rw_wr3byte_default = 0x00000000, - regk_iop_fifo_out_rw_wr3byte_last_default = 0x00000000, - regk_iop_fifo_out_rw_wr4byte_default = 0x00000000, - regk_iop_fifo_out_rw_wr4byte_last_default = 0x00000000, - regk_iop_fifo_out_size16 = 0x00000002, - regk_iop_fifo_out_size24 = 0x00000001, - regk_iop_fifo_out_size32 = 0x00000000, - regk_iop_fifo_out_size8 = 0x00000003, - regk_iop_fifo_out_yes = 0x00000001 -}; -#endif /* __iop_fifo_out_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h deleted file mode 100644 index 4a840aae84ee..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef __iop_fifo_out_extra_defs_h -#define __iop_fifo_out_extra_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_fifo_out_extra.r - * id: - * last modfied: Mon Apr 11 16:10:10 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_out_extra_defs.h ../../inst/io_proc/rtl/iop_fifo_out_extra.r - * id: $Id: iop_fifo_out_extra_defs.h,v 1.1 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_fifo_out_extra */ - -/* Register rs_rd_data, scope iop_fifo_out_extra, type rs */ -typedef unsigned int reg_iop_fifo_out_extra_rs_rd_data; -#define REG_RD_ADDR_iop_fifo_out_extra_rs_rd_data 0 - -/* Register r_rd_data, scope iop_fifo_out_extra, type r */ -typedef unsigned int reg_iop_fifo_out_extra_r_rd_data; -#define REG_RD_ADDR_iop_fifo_out_extra_r_rd_data 4 - -/* Register r_stat, scope iop_fifo_out_extra, type r */ -typedef struct { - unsigned int avail_bytes : 4; - unsigned int last : 8; - unsigned int dif_in_en : 1; - unsigned int dif_out_en : 1; - unsigned int zero_data_last : 1; - unsigned int dummy1 : 17; -} reg_iop_fifo_out_extra_r_stat; -#define REG_RD_ADDR_iop_fifo_out_extra_r_stat 8 - -/* Register rw_strb_dif_out, scope iop_fifo_out_extra, type rw */ -typedef unsigned int reg_iop_fifo_out_extra_rw_strb_dif_out; -#define REG_RD_ADDR_iop_fifo_out_extra_rw_strb_dif_out 12 -#define REG_WR_ADDR_iop_fifo_out_extra_rw_strb_dif_out 12 - -/* Register rw_intr_mask, scope iop_fifo_out_extra, type rw */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int free : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_out_extra_rw_intr_mask; -#define REG_RD_ADDR_iop_fifo_out_extra_rw_intr_mask 16 -#define REG_WR_ADDR_iop_fifo_out_extra_rw_intr_mask 16 - -/* Register rw_ack_intr, scope iop_fifo_out_extra, type rw */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int free : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_out_extra_rw_ack_intr; -#define REG_RD_ADDR_iop_fifo_out_extra_rw_ack_intr 20 -#define REG_WR_ADDR_iop_fifo_out_extra_rw_ack_intr 20 - -/* Register r_intr, scope iop_fifo_out_extra, type r */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int free : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_out_extra_r_intr; -#define REG_RD_ADDR_iop_fifo_out_extra_r_intr 24 - -/* Register r_masked_intr, scope iop_fifo_out_extra, type r */ -typedef struct { - unsigned int urun : 1; - unsigned int last_data : 1; - unsigned int dav : 1; - unsigned int free : 1; - unsigned int orun : 1; - unsigned int dummy1 : 27; -} reg_iop_fifo_out_extra_r_masked_intr; -#define REG_RD_ADDR_iop_fifo_out_extra_r_masked_intr 28 - - -/* Constants */ -enum { - regk_iop_fifo_out_extra_no = 0x00000000, - regk_iop_fifo_out_extra_rw_intr_mask_default = 0x00000000, - regk_iop_fifo_out_extra_yes = 0x00000001 -}; -#endif /* __iop_fifo_out_extra_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h deleted file mode 100644 index c2b0ba1be60f..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h +++ /dev/null @@ -1,190 +0,0 @@ -#ifndef __iop_mpu_defs_h -#define __iop_mpu_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_mpu.r - * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_mpu_defs.h ../../inst/io_proc/rtl/iop_mpu.r - * id: $Id: iop_mpu_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_mpu */ - -#define STRIDE_iop_mpu_rw_r 4 -/* Register rw_r, scope iop_mpu, type rw */ -typedef unsigned int reg_iop_mpu_rw_r; -#define REG_RD_ADDR_iop_mpu_rw_r 0 -#define REG_WR_ADDR_iop_mpu_rw_r 0 - -/* Register rw_ctrl, scope iop_mpu, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int dummy1 : 31; -} reg_iop_mpu_rw_ctrl; -#define REG_RD_ADDR_iop_mpu_rw_ctrl 128 -#define REG_WR_ADDR_iop_mpu_rw_ctrl 128 - -/* Register r_pc, scope iop_mpu, type r */ -typedef struct { - unsigned int addr : 12; - unsigned int dummy1 : 20; -} reg_iop_mpu_r_pc; -#define REG_RD_ADDR_iop_mpu_r_pc 132 - -/* Register r_stat, scope iop_mpu, type r */ -typedef struct { - unsigned int instr_reg_busy : 1; - unsigned int intr_busy : 1; - unsigned int intr_vect : 16; - unsigned int dummy1 : 14; -} reg_iop_mpu_r_stat; -#define REG_RD_ADDR_iop_mpu_r_stat 136 - -/* Register rw_instr, scope iop_mpu, type rw */ -typedef unsigned int reg_iop_mpu_rw_instr; -#define REG_RD_ADDR_iop_mpu_rw_instr 140 -#define REG_WR_ADDR_iop_mpu_rw_instr 140 - -/* Register rw_immediate, scope iop_mpu, type rw */ -typedef unsigned int reg_iop_mpu_rw_immediate; -#define REG_RD_ADDR_iop_mpu_rw_immediate 144 -#define REG_WR_ADDR_iop_mpu_rw_immediate 144 - -/* Register r_trace, scope iop_mpu, type r */ -typedef struct { - unsigned int intr_vect : 16; - unsigned int pc : 12; - unsigned int en : 1; - unsigned int instr_reg_busy : 1; - unsigned int intr_busy : 1; - unsigned int dummy1 : 1; -} reg_iop_mpu_r_trace; -#define REG_RD_ADDR_iop_mpu_r_trace 148 - -/* Register r_wr_stat, scope iop_mpu, type r */ -typedef struct { - unsigned int r0 : 1; - unsigned int r1 : 1; - unsigned int r2 : 1; - unsigned int r3 : 1; - unsigned int r4 : 1; - unsigned int r5 : 1; - unsigned int r6 : 1; - unsigned int r7 : 1; - unsigned int r8 : 1; - unsigned int r9 : 1; - unsigned int r10 : 1; - unsigned int r11 : 1; - unsigned int r12 : 1; - unsigned int r13 : 1; - unsigned int r14 : 1; - unsigned int r15 : 1; - unsigned int dummy1 : 16; -} reg_iop_mpu_r_wr_stat; -#define REG_RD_ADDR_iop_mpu_r_wr_stat 152 - -#define STRIDE_iop_mpu_rw_thread 4 -/* Register rw_thread, scope iop_mpu, type rw */ -typedef struct { - unsigned int addr : 12; - unsigned int dummy1 : 20; -} reg_iop_mpu_rw_thread; -#define REG_RD_ADDR_iop_mpu_rw_thread 156 -#define REG_WR_ADDR_iop_mpu_rw_thread 156 - -#define STRIDE_iop_mpu_rw_intr 4 -/* Register rw_intr, scope iop_mpu, type rw */ -typedef struct { - unsigned int addr : 12; - unsigned int dummy1 : 20; -} reg_iop_mpu_rw_intr; -#define REG_RD_ADDR_iop_mpu_rw_intr 196 -#define REG_WR_ADDR_iop_mpu_rw_intr 196 - - -/* Constants */ -enum { - regk_iop_mpu_no = 0x00000000, - regk_iop_mpu_r_pc_default = 0x00000000, - regk_iop_mpu_rw_ctrl_default = 0x00000000, - regk_iop_mpu_rw_intr_size = 0x00000010, - regk_iop_mpu_rw_r_size = 0x00000010, - regk_iop_mpu_rw_thread_default = 0x00000000, - regk_iop_mpu_rw_thread_size = 0x00000004, - regk_iop_mpu_yes = 0x00000001 -}; -#endif /* __iop_mpu_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h b/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h deleted file mode 100644 index 2ec897ced166..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h +++ /dev/null @@ -1,764 +0,0 @@ -/* ************************************************************************* */ -/* This file is autogenerated by IOPASM Version 1.2 */ -/* DO NOT EDIT THIS FILE - All changes will be lost! */ -/* ************************************************************************* */ - - - -#ifndef __IOP_MPU_MACROS_H__ -#define __IOP_MPU_MACROS_H__ - - -/* ************************************************************************* */ -/* REGISTER DEFINITIONS */ -/* ************************************************************************* */ -#define MPU_R0 (0x0) -#define MPU_R1 (0x1) -#define MPU_R2 (0x2) -#define MPU_R3 (0x3) -#define MPU_R4 (0x4) -#define MPU_R5 (0x5) -#define MPU_R6 (0x6) -#define MPU_R7 (0x7) -#define MPU_R8 (0x8) -#define MPU_R9 (0x9) -#define MPU_R10 (0xa) -#define MPU_R11 (0xb) -#define MPU_R12 (0xc) -#define MPU_R13 (0xd) -#define MPU_R14 (0xe) -#define MPU_R15 (0xf) -#define MPU_PC (0x2) -#define MPU_WSTS (0x3) -#define MPU_JADDR (0x4) -#define MPU_IRP (0x5) -#define MPU_SRP (0x6) -#define MPU_T0 (0x8) -#define MPU_T1 (0x9) -#define MPU_T2 (0xa) -#define MPU_T3 (0xb) -#define MPU_I0 (0x10) -#define MPU_I1 (0x11) -#define MPU_I2 (0x12) -#define MPU_I3 (0x13) -#define MPU_I4 (0x14) -#define MPU_I5 (0x15) -#define MPU_I6 (0x16) -#define MPU_I7 (0x17) -#define MPU_I8 (0x18) -#define MPU_I9 (0x19) -#define MPU_I10 (0x1a) -#define MPU_I11 (0x1b) -#define MPU_I12 (0x1c) -#define MPU_I13 (0x1d) -#define MPU_I14 (0x1e) -#define MPU_I15 (0x1f) -#define MPU_P2 (0x2) -#define MPU_P3 (0x3) -#define MPU_P5 (0x5) -#define MPU_P6 (0x6) -#define MPU_P8 (0x8) -#define MPU_P9 (0x9) -#define MPU_P10 (0xa) -#define MPU_P11 (0xb) -#define MPU_P16 (0x10) -#define MPU_P17 (0x12) -#define MPU_P18 (0x12) -#define MPU_P19 (0x13) -#define MPU_P20 (0x14) -#define MPU_P21 (0x15) -#define MPU_P22 (0x16) -#define MPU_P23 (0x17) -#define MPU_P24 (0x18) -#define MPU_P25 (0x19) -#define MPU_P26 (0x1a) -#define MPU_P27 (0x1b) -#define MPU_P28 (0x1c) -#define MPU_P29 (0x1d) -#define MPU_P30 (0x1e) -#define MPU_P31 (0x1f) -#define MPU_P1 (0x1) -#define MPU_REGA (0x1) - - - -/* ************************************************************************* */ -/* ADDRESS MACROS */ -/* ************************************************************************* */ -#define MK_DWORD_ADDR(ADDR) (ADDR >> 2) -#define MK_BYTE_ADDR(ADDR) (ADDR) - - - -/* ************************************************************************* */ -/* INSTRUCTION MACROS */ -/* ************************************************************************* */ -#define MPU_ADD_RRR(S,N,D) (0x4000008C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADD_RRS(S,N,D) (0x4000048C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADD_RSR(S,N,D) (0x4000018C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADD_RSS(S,N,D) (0x4000058C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADD_SRR(S,N,D) (0x4000028C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADD_SRS(S,N,D) (0x4000068C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADD_SSR(S,N,D) (0x4000038C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADD_SSS(S,N,D) (0x4000078C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDQ_RIR(S,N,D) (0x10000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDQ_IRR(S,N,D) (0x10000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDX_IRR_INSTR(S,N,D) (0xC000008C | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ADDX_RIR_INSTR(S,N,D) (0xC000008C | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_ADDX_ISR_INSTR(S,N,D) (0xC000028C | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ADDX_SIR_INSTR(S,N,D) (0xC000028C | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_ADDX_IRS_INSTR(S,N,D) (0xC000048C | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ADDX_RIS_INSTR(S,N,D) (0xC000048C | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_ADDX_ISS_INSTR(S,N,D) (0xC000068C | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ADDX_SIS_INSTR(S,N,D) (0xC000068C | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ADDX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_AND_RRR(S,N,D) (0x4000008A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_AND_RRS(S,N,D) (0x4000048A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_AND_RSR(S,N,D) (0x4000018A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_AND_RSS(S,N,D) (0x4000058A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_AND_SRR(S,N,D) (0x4000028A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_AND_SRS(S,N,D) (0x4000068A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_AND_SSR(S,N,D) (0x4000038A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_AND_SSS(S,N,D) (0x4000078A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDQ_RIR(S,N,D) (0x08000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDQ_IRR(S,N,D) (0x08000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDX_RIR_INSTR(S,N,D) (0xC000008A | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_ANDX_IRR_INSTR(S,N,D) (0xC000008A | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ANDX_ISR_INSTR(S,N,D) (0xC000028A | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ANDX_SIR_INSTR(S,N,D) (0xC000028A | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_ANDX_IRS_INSTR(S,N,D) (0xC000048A | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ANDX_ISS_INSTR(S,N,D) (0xC000068A | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ANDX_RIS_INSTR(S,N,D) (0xC000048A | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_ANDX_SIS_INSTR(S,N,D) (0xC000068A | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ANDX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_BA_I(S) (0x60000000 | ((S & ((1 << 16) - 1)) << 0)) - -#define MPU_BAR_R(S) (0x62000000 | ((S & ((1 << 5) - 1)) << 11)) - -#define MPU_BAR_S(S) (0x63000000 | ((S & ((1 << 5) - 1)) << 11)) - -#define MPU_BBC_RII(S,N,D) (0x78000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 21)\ - | ((D & ((1 << 16) - 1)) << 0)) - -#define MPU_BBS_RII(S,N,D) (0x7C000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 21)\ - | ((D & ((1 << 16) - 1)) << 0)) - -#define MPU_BNZ_RI(S,D) (0x74400000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) - -#define MPU_BMI_RI(S,D) (0x7FE00000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) - -#define MPU_BPL_RI(S,D) (0x7BE00000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) - -#define MPU_BZ_RI(S,D) (0x74000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) - -#define MPU_DI() (0x40000001) - -#define MPU_EI() (0x40000003) - -#define MPU_HALT() (0x40000002) - -#define MPU_JIR_I(S) (0x60200000 | ((S & ((1 << 16) - 1)) << 0)) - -#define MPU_JIR_R(S) (0x62200000 | ((S & ((1 << 5) - 1)) << 11)) - -#define MPU_JIR_S(S) (0x63200000 | ((S & ((1 << 5) - 1)) << 11)) - -#define MPU_JNT() (0x61000000) - -#define MPU_JSR_I(S) (0x60400000 | ((S & ((1 << 16) - 1)) << 0)) - -#define MPU_JSR_R(S) (0x62400000 | ((S & ((1 << 5) - 1)) << 11)) - -#define MPU_JSR_S(S) (0x63400000 | ((S & ((1 << 5) - 1)) << 11)) - -#define MPU_LSL_RRR(S,N,D) (0x4000008E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSL_RRS(S,N,D) (0x4000048E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSL_RSR(S,N,D) (0x4000018E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSL_RSS(S,N,D) (0x4000058E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSL_SRR(S,N,D) (0x4000028E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSL_SRS(S,N,D) (0x4000068E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSL_SSR(S,N,D) (0x4000038E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSL_SSS(S,N,D) (0x4000078E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSLQ_RIR(S,N,D) (0x18000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSR_RRR(S,N,D) (0x4000008F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSR_RRS(S,N,D) (0x4000048F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSR_RSR(S,N,D) (0x4000018F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSR_RSS(S,N,D) (0x4000058F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSR_SRR(S,N,D) (0x4000028F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSR_SRS(S,N,D) (0x4000068F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSR_SSR(S,N,D) (0x4000038F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSR_SSS(S,N,D) (0x4000078F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LSRQ_RIR(S,N,D) (0x1C000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_LW_IR(S,D) (0x64400000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_LW_IS(S,D) (0x64600000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_LW_RR(S,D) (0x66400000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_LW_RS(S,D) (0x66600000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_LW_SR(S,D) (0x67400000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_LW_SS(S,D) (0x67600000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_LW_RIR(S,N,D) (0x66400000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_LW_RIS(S,N,D) (0x66600000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_LW_SIR(S,N,D) (0x67400000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_LW_SIS(S,N,D) (0x67600000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_MOVE_RR(S,D) (0x40000081 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_MOVE_RS(S,D) (0x40000481 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_MOVE_SR(S,D) (0x40000181 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_MOVE_SS(S,D) (0x40000581 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_MOVEQ_IR(S,D) (0x24000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_MOVEQ_IS(S,D) (0x2C000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_MOVEX_IR_INSTR(S,D) (0xC0000081 | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_MOVEX_IR_IMM(S,D) (S & 0xFFFFFFFF) - -#define MPU_MOVEX_IS_INSTR(S,D) (0xC0000481 | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_MOVEX_IS_IMM(S,D) (S & 0xFFFFFFFF) - -#define MPU_NOP() (0x40000000) - -#define MPU_NOT_RR(S,D) (0x40100081 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_NOT_RS(S,D) (0x40100481 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_NOT_SR(S,D) (0x40100181 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_NOT_SS(S,D) (0x40100581 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_OR_RRR(S,N,D) (0x4000008B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_OR_RRS(S,N,D) (0x4000048B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_OR_RSR(S,N,D) (0x4000018B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_OR_RSS(S,N,D) (0x4000058B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_OR_SRR(S,N,D) (0x4000028B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_OR_SRS(S,N,D) (0x4000068B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_OR_SSR(S,N,D) (0x4000038B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_OR_SSS(S,N,D) (0x4000078B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORQ_RIR(S,N,D) (0x0C000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORQ_IRR(S,N,D) (0x0C000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORX_RIR_INSTR(S,N,D) (0xC000008B | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_ORX_IRR_INSTR(S,N,D) (0xC000008B | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ORX_SIR_INSTR(S,N,D) (0xC000028B | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_ORX_ISR_INSTR(S,N,D) (0xC000028B | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ORX_RIS_INSTR(S,N,D) (0xC000048B | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_ORX_IRS_INSTR(S,N,D) (0xC000048B | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_ORX_SIS_INSTR(S,N,D) (0xC000068B | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_ORX_ISS_INSTR(S,N,D) (0xC000068B | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_ORX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_RET() (0x63003000) - -#define MPU_RETI() (0x63602800) - -#define MPU_RR_IR(S,D) (0x50000000 | ((S & ((1 << 11) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_RR_SR(S,D) (0x50008000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_RW_RI(S,D) (0x56000000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 11) - 1)) << 0)) - -#define MPU_RW_RS(S,D) (0x57000000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_RWQ_II(S,D) (0x58000000 | ((S & ((1 << 16) - 1)) << 11)\ - | ((D & ((1 << 11) - 1)) << 0)) - -#define MPU_RWQ_IS(S,D) (0x55000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_RWX_II_INSTR(S,D) (0xD4000000 | ((D & ((1 << 11) - 1)) << 0)) - -#define MPU_RWX_II_IMM(S,D) (S & 0xFFFFFFFF) - -#define MPU_RWX_IS_INSTR(S,D) (0xD5000000 | ((D & ((1 << 5) - 1)) << 16)) - -#define MPU_RWX_IS_IMM(S,D) (S & 0xFFFFFFFF) - -#define MPU_SUB_RRR(S,N,D) (0x4000008D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUB_RRS(S,N,D) (0x4000048D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUB_RSR(S,N,D) (0x4000018D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUB_RSS(S,N,D) (0x4000058D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUB_SRR(S,N,D) (0x4000028D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUB_SRS(S,N,D) (0x4000068D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUB_SSR(S,N,D) (0x4000038D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUB_SSS(S,N,D) (0x4000078D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUBQ_RIR(S,N,D) (0x14000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUBX_RIR_INSTR(S,N,D) (0xC000008D | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUBX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_SUBX_SIR_INSTR(S,N,D) (0xC000028D | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUBX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_SUBX_RIS_INSTR(S,N,D) (0xC000048D | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUBX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_SUBX_SIS_INSTR(S,N,D) (0xC000068D | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_SUBX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_SW_RI(S,D) (0x64000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) - -#define MPU_SW_SI(S,D) (0x64200000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) - -#define MPU_SW_RR(S,D) (0x66000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SW_SR(S,D) (0x66200000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SW_RS(S,D) (0x67000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SW_SS(S,D) (0x67200000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SW_RIR(S,N,D) (0x66000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SW_SIR(S,N,D) (0x66200000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SW_RIS(S,N,D) (0x67000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SW_SIS(S,N,D) (0x67200000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SWX_II_INSTR(S,D) (0xE4000000 | ((D & ((1 << 16) - 1)) << 0)) - -#define MPU_SWX_II_IMM(S,D) (S & 0xFFFFFFFF) - -#define MPU_SWX_IR_INSTR(S,D) (0xE6000000 | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SWX_IR_IMM(S,D) (S & 0xFFFFFFFF) - -#define MPU_SWX_IS_INSTR(S,D) (0xE7000000 | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SWX_IS_IMM(S,D) (S & 0xFFFFFFFF) - -#define MPU_SWX_IIR_INSTR(S,N,D) (0xE6000000 | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SWX_IIR_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_SWX_IIS_INSTR(S,N,D) (0xE7000000 | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) - -#define MPU_SWX_IIS_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_XOR_RRR(S,N,D) (0x40000089 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_RRS(S,N,D) (0x40000489 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_RSR(S,N,D) (0x40000189 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_RSS(S,N,D) (0x40000589 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_SRR(S,N,D) (0x40000289 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_SRS(S,N,D) (0x40000689 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_SSR(S,N,D) (0x40000389 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_SSS(S,N,D) (0x40000789 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_RR(S,D) (0x40000088 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_RS(S,D) (0x40000488 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_SR(S,D) (0x40000188 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XOR_SS(S,D) (0x40000588 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORQ_RIR(S,N,D) (0x04000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORQ_IRR(S,N,D) (0x04000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORX_RIR_INSTR(S,N,D) (0xC0000089 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_XORX_IRR_INSTR(S,N,D) (0xC0000089 | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_XORX_SIR_INSTR(S,N,D) (0xC0000289 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_XORX_ISR_INSTR(S,N,D) (0xC0000289 | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_XORX_RIS_INSTR(S,N,D) (0xC0000489 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_XORX_IRS_INSTR(S,N,D) (0xC0000489 | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) - -#define MPU_XORX_SIS_INSTR(S,N,D) (0xC0000689 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) - -#define MPU_XORX_ISS_INSTR(S,N,D) (0xC0000689 | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) - -#define MPU_XORX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) - - -#endif /* end of __IOP_MPU_MACROS_H__ */ -/* End of iop_mpu_macros.h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h b/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h deleted file mode 100644 index 756550f5d6cb..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h +++ /dev/null @@ -1,44 +0,0 @@ -/* Autogenerated Changes here will be lost! - * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg - */ -#define regi_iop_version (regi_iop + 0) -#define regi_iop_fifo_in0_extra (regi_iop + 64) -#define regi_iop_fifo_in1_extra (regi_iop + 128) -#define regi_iop_fifo_out0_extra (regi_iop + 192) -#define regi_iop_fifo_out1_extra (regi_iop + 256) -#define regi_iop_trigger_grp0 (regi_iop + 320) -#define regi_iop_trigger_grp1 (regi_iop + 384) -#define regi_iop_trigger_grp2 (regi_iop + 448) -#define regi_iop_trigger_grp3 (regi_iop + 512) -#define regi_iop_trigger_grp4 (regi_iop + 576) -#define regi_iop_trigger_grp5 (regi_iop + 640) -#define regi_iop_trigger_grp6 (regi_iop + 704) -#define regi_iop_trigger_grp7 (regi_iop + 768) -#define regi_iop_crc_par0 (regi_iop + 896) -#define regi_iop_crc_par1 (regi_iop + 1024) -#define regi_iop_dmc_in0 (regi_iop + 1152) -#define regi_iop_dmc_in1 (regi_iop + 1280) -#define regi_iop_dmc_out0 (regi_iop + 1408) -#define regi_iop_dmc_out1 (regi_iop + 1536) -#define regi_iop_fifo_in0 (regi_iop + 1664) -#define regi_iop_fifo_in1 (regi_iop + 1792) -#define regi_iop_fifo_out0 (regi_iop + 1920) -#define regi_iop_fifo_out1 (regi_iop + 2048) -#define regi_iop_scrc_in0 (regi_iop + 2176) -#define regi_iop_scrc_in1 (regi_iop + 2304) -#define regi_iop_scrc_out0 (regi_iop + 2432) -#define regi_iop_scrc_out1 (regi_iop + 2560) -#define regi_iop_timer_grp0 (regi_iop + 2688) -#define regi_iop_timer_grp1 (regi_iop + 2816) -#define regi_iop_timer_grp2 (regi_iop + 2944) -#define regi_iop_timer_grp3 (regi_iop + 3072) -#define regi_iop_sap_in (regi_iop + 3328) -#define regi_iop_sap_out (regi_iop + 3584) -#define regi_iop_spu0 (regi_iop + 3840) -#define regi_iop_spu1 (regi_iop + 4096) -#define regi_iop_sw_cfg (regi_iop + 4352) -#define regi_iop_sw_cpu (regi_iop + 4608) -#define regi_iop_sw_mpu (regi_iop + 4864) -#define regi_iop_sw_spu0 (regi_iop + 5120) -#define regi_iop_sw_spu1 (regi_iop + 5376) -#define regi_iop_mpu (regi_iop + 5632) diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h deleted file mode 100644 index 5548ac10074f..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h +++ /dev/null @@ -1,179 +0,0 @@ -#ifndef __iop_sap_in_defs_h -#define __iop_sap_in_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_sap_in.r - * id: - * last modfied: Mon Apr 11 16:08:45 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sap_in_defs.h ../../inst/io_proc/rtl/iop_sap_in.r - * id: $Id: iop_sap_in_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sap_in */ - -/* Register rw_bus0_sync, scope iop_sap_in, type rw */ -typedef struct { - unsigned int byte0_sel : 2; - unsigned int byte0_ext_src : 3; - unsigned int byte0_edge : 2; - unsigned int byte0_delay : 1; - unsigned int byte1_sel : 2; - unsigned int byte1_ext_src : 3; - unsigned int byte1_edge : 2; - unsigned int byte1_delay : 1; - unsigned int byte2_sel : 2; - unsigned int byte2_ext_src : 3; - unsigned int byte2_edge : 2; - unsigned int byte2_delay : 1; - unsigned int byte3_sel : 2; - unsigned int byte3_ext_src : 3; - unsigned int byte3_edge : 2; - unsigned int byte3_delay : 1; -} reg_iop_sap_in_rw_bus0_sync; -#define REG_RD_ADDR_iop_sap_in_rw_bus0_sync 0 -#define REG_WR_ADDR_iop_sap_in_rw_bus0_sync 0 - -/* Register rw_bus1_sync, scope iop_sap_in, type rw */ -typedef struct { - unsigned int byte0_sel : 2; - unsigned int byte0_ext_src : 3; - unsigned int byte0_edge : 2; - unsigned int byte0_delay : 1; - unsigned int byte1_sel : 2; - unsigned int byte1_ext_src : 3; - unsigned int byte1_edge : 2; - unsigned int byte1_delay : 1; - unsigned int byte2_sel : 2; - unsigned int byte2_ext_src : 3; - unsigned int byte2_edge : 2; - unsigned int byte2_delay : 1; - unsigned int byte3_sel : 2; - unsigned int byte3_ext_src : 3; - unsigned int byte3_edge : 2; - unsigned int byte3_delay : 1; -} reg_iop_sap_in_rw_bus1_sync; -#define REG_RD_ADDR_iop_sap_in_rw_bus1_sync 4 -#define REG_WR_ADDR_iop_sap_in_rw_bus1_sync 4 - -#define STRIDE_iop_sap_in_rw_gio 4 -/* Register rw_gio, scope iop_sap_in, type rw */ -typedef struct { - unsigned int sync_sel : 2; - unsigned int sync_ext_src : 3; - unsigned int sync_edge : 2; - unsigned int delay : 1; - unsigned int logic : 2; - unsigned int dummy1 : 22; -} reg_iop_sap_in_rw_gio; -#define REG_RD_ADDR_iop_sap_in_rw_gio 8 -#define REG_WR_ADDR_iop_sap_in_rw_gio 8 - - -/* Constants */ -enum { - regk_iop_sap_in_and = 0x00000002, - regk_iop_sap_in_ext_clk200 = 0x00000003, - regk_iop_sap_in_gio1 = 0x00000000, - regk_iop_sap_in_gio13 = 0x00000005, - regk_iop_sap_in_gio18 = 0x00000003, - regk_iop_sap_in_gio19 = 0x00000004, - regk_iop_sap_in_gio21 = 0x00000006, - regk_iop_sap_in_gio23 = 0x00000005, - regk_iop_sap_in_gio29 = 0x00000007, - regk_iop_sap_in_gio5 = 0x00000004, - regk_iop_sap_in_gio6 = 0x00000001, - regk_iop_sap_in_gio7 = 0x00000002, - regk_iop_sap_in_inv = 0x00000001, - regk_iop_sap_in_neg = 0x00000002, - regk_iop_sap_in_no = 0x00000000, - regk_iop_sap_in_no_del_ext_clk200 = 0x00000001, - regk_iop_sap_in_none = 0x00000000, - regk_iop_sap_in_or = 0x00000003, - regk_iop_sap_in_pos = 0x00000001, - regk_iop_sap_in_pos_neg = 0x00000003, - regk_iop_sap_in_rw_bus0_sync_default = 0x02020202, - regk_iop_sap_in_rw_bus1_sync_default = 0x02020202, - regk_iop_sap_in_rw_gio_default = 0x00000002, - regk_iop_sap_in_rw_gio_size = 0x00000020, - regk_iop_sap_in_timer_grp0_tmr3 = 0x00000006, - regk_iop_sap_in_timer_grp1_tmr3 = 0x00000004, - regk_iop_sap_in_timer_grp2_tmr3 = 0x00000005, - regk_iop_sap_in_timer_grp3_tmr3 = 0x00000007, - regk_iop_sap_in_tmr_clk200 = 0x00000000, - regk_iop_sap_in_two_clk200 = 0x00000002, - regk_iop_sap_in_yes = 0x00000001 -}; -#endif /* __iop_sap_in_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h deleted file mode 100644 index 273936996183..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h +++ /dev/null @@ -1,306 +0,0 @@ -#ifndef __iop_sap_out_defs_h -#define __iop_sap_out_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_sap_out.r - * id: - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sap_out_defs.h ../../inst/io_proc/rtl/iop_sap_out.r - * id: $Id: iop_sap_out_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sap_out */ - -/* Register rw_gen_gated, scope iop_sap_out, type rw */ -typedef struct { - unsigned int clk0_src : 2; - unsigned int clk0_gate_src : 2; - unsigned int clk0_force_src : 3; - unsigned int clk1_src : 2; - unsigned int clk1_gate_src : 2; - unsigned int clk1_force_src : 3; - unsigned int clk2_src : 2; - unsigned int clk2_gate_src : 2; - unsigned int clk2_force_src : 3; - unsigned int clk3_src : 2; - unsigned int clk3_gate_src : 2; - unsigned int clk3_force_src : 3; - unsigned int dummy1 : 4; -} reg_iop_sap_out_rw_gen_gated; -#define REG_RD_ADDR_iop_sap_out_rw_gen_gated 0 -#define REG_WR_ADDR_iop_sap_out_rw_gen_gated 0 - -/* Register rw_bus0, scope iop_sap_out, type rw */ -typedef struct { - unsigned int byte0_clk_sel : 3; - unsigned int byte0_gated_clk : 2; - unsigned int byte0_clk_inv : 1; - unsigned int byte1_clk_sel : 3; - unsigned int byte1_gated_clk : 2; - unsigned int byte1_clk_inv : 1; - unsigned int byte2_clk_sel : 3; - unsigned int byte2_gated_clk : 2; - unsigned int byte2_clk_inv : 1; - unsigned int byte3_clk_sel : 3; - unsigned int byte3_gated_clk : 2; - unsigned int byte3_clk_inv : 1; - unsigned int dummy1 : 8; -} reg_iop_sap_out_rw_bus0; -#define REG_RD_ADDR_iop_sap_out_rw_bus0 4 -#define REG_WR_ADDR_iop_sap_out_rw_bus0 4 - -/* Register rw_bus1, scope iop_sap_out, type rw */ -typedef struct { - unsigned int byte0_clk_sel : 3; - unsigned int byte0_gated_clk : 2; - unsigned int byte0_clk_inv : 1; - unsigned int byte1_clk_sel : 3; - unsigned int byte1_gated_clk : 2; - unsigned int byte1_clk_inv : 1; - unsigned int byte2_clk_sel : 3; - unsigned int byte2_gated_clk : 2; - unsigned int byte2_clk_inv : 1; - unsigned int byte3_clk_sel : 3; - unsigned int byte3_gated_clk : 2; - unsigned int byte3_clk_inv : 1; - unsigned int dummy1 : 8; -} reg_iop_sap_out_rw_bus1; -#define REG_RD_ADDR_iop_sap_out_rw_bus1 8 -#define REG_WR_ADDR_iop_sap_out_rw_bus1 8 - -/* Register rw_bus0_lo_oe, scope iop_sap_out, type rw */ -typedef struct { - unsigned int byte0_clk_sel : 3; - unsigned int byte0_clk_ext : 3; - unsigned int byte0_gated_clk : 2; - unsigned int byte0_clk_inv : 1; - unsigned int byte0_logic : 2; - unsigned int byte1_clk_sel : 3; - unsigned int byte1_clk_ext : 3; - unsigned int byte1_gated_clk : 2; - unsigned int byte1_clk_inv : 1; - unsigned int byte1_logic : 2; - unsigned int dummy1 : 10; -} reg_iop_sap_out_rw_bus0_lo_oe; -#define REG_RD_ADDR_iop_sap_out_rw_bus0_lo_oe 12 -#define REG_WR_ADDR_iop_sap_out_rw_bus0_lo_oe 12 - -/* Register rw_bus0_hi_oe, scope iop_sap_out, type rw */ -typedef struct { - unsigned int byte2_clk_sel : 3; - unsigned int byte2_clk_ext : 3; - unsigned int byte2_gated_clk : 2; - unsigned int byte2_clk_inv : 1; - unsigned int byte2_logic : 2; - unsigned int byte3_clk_sel : 3; - unsigned int byte3_clk_ext : 3; - unsigned int byte3_gated_clk : 2; - unsigned int byte3_clk_inv : 1; - unsigned int byte3_logic : 2; - unsigned int dummy1 : 10; -} reg_iop_sap_out_rw_bus0_hi_oe; -#define REG_RD_ADDR_iop_sap_out_rw_bus0_hi_oe 16 -#define REG_WR_ADDR_iop_sap_out_rw_bus0_hi_oe 16 - -/* Register rw_bus1_lo_oe, scope iop_sap_out, type rw */ -typedef struct { - unsigned int byte0_clk_sel : 3; - unsigned int byte0_clk_ext : 3; - unsigned int byte0_gated_clk : 2; - unsigned int byte0_clk_inv : 1; - unsigned int byte0_logic : 2; - unsigned int byte1_clk_sel : 3; - unsigned int byte1_clk_ext : 3; - unsigned int byte1_gated_clk : 2; - unsigned int byte1_clk_inv : 1; - unsigned int byte1_logic : 2; - unsigned int dummy1 : 10; -} reg_iop_sap_out_rw_bus1_lo_oe; -#define REG_RD_ADDR_iop_sap_out_rw_bus1_lo_oe 20 -#define REG_WR_ADDR_iop_sap_out_rw_bus1_lo_oe 20 - -/* Register rw_bus1_hi_oe, scope iop_sap_out, type rw */ -typedef struct { - unsigned int byte2_clk_sel : 3; - unsigned int byte2_clk_ext : 3; - unsigned int byte2_gated_clk : 2; - unsigned int byte2_clk_inv : 1; - unsigned int byte2_logic : 2; - unsigned int byte3_clk_sel : 3; - unsigned int byte3_clk_ext : 3; - unsigned int byte3_gated_clk : 2; - unsigned int byte3_clk_inv : 1; - unsigned int byte3_logic : 2; - unsigned int dummy1 : 10; -} reg_iop_sap_out_rw_bus1_hi_oe; -#define REG_RD_ADDR_iop_sap_out_rw_bus1_hi_oe 24 -#define REG_WR_ADDR_iop_sap_out_rw_bus1_hi_oe 24 - -#define STRIDE_iop_sap_out_rw_gio 4 -/* Register rw_gio, scope iop_sap_out, type rw */ -typedef struct { - unsigned int out_clk_sel : 3; - unsigned int out_clk_ext : 4; - unsigned int out_gated_clk : 2; - unsigned int out_clk_inv : 1; - unsigned int out_logic : 1; - unsigned int oe_clk_sel : 3; - unsigned int oe_clk_ext : 3; - unsigned int oe_gated_clk : 2; - unsigned int oe_clk_inv : 1; - unsigned int oe_logic : 2; - unsigned int dummy1 : 10; -} reg_iop_sap_out_rw_gio; -#define REG_RD_ADDR_iop_sap_out_rw_gio 28 -#define REG_WR_ADDR_iop_sap_out_rw_gio 28 - - -/* Constants */ -enum { - regk_iop_sap_out_and = 0x00000002, - regk_iop_sap_out_clk0 = 0x00000000, - regk_iop_sap_out_clk1 = 0x00000001, - regk_iop_sap_out_clk12 = 0x00000002, - regk_iop_sap_out_clk2 = 0x00000002, - regk_iop_sap_out_clk200 = 0x00000001, - regk_iop_sap_out_clk3 = 0x00000003, - regk_iop_sap_out_ext = 0x00000003, - regk_iop_sap_out_gated = 0x00000004, - regk_iop_sap_out_gio1 = 0x00000000, - regk_iop_sap_out_gio13 = 0x00000002, - regk_iop_sap_out_gio13_clk = 0x0000000c, - regk_iop_sap_out_gio15 = 0x00000001, - regk_iop_sap_out_gio18 = 0x00000003, - regk_iop_sap_out_gio18_clk = 0x0000000d, - regk_iop_sap_out_gio1_clk = 0x00000008, - regk_iop_sap_out_gio21_clk = 0x0000000e, - regk_iop_sap_out_gio23 = 0x00000002, - regk_iop_sap_out_gio29_clk = 0x0000000f, - regk_iop_sap_out_gio31 = 0x00000003, - regk_iop_sap_out_gio5 = 0x00000001, - regk_iop_sap_out_gio5_clk = 0x00000009, - regk_iop_sap_out_gio6_clk = 0x0000000a, - regk_iop_sap_out_gio7 = 0x00000000, - regk_iop_sap_out_gio7_clk = 0x0000000b, - regk_iop_sap_out_gio_in13 = 0x00000001, - regk_iop_sap_out_gio_in21 = 0x00000002, - regk_iop_sap_out_gio_in29 = 0x00000003, - regk_iop_sap_out_gio_in5 = 0x00000000, - regk_iop_sap_out_inv = 0x00000001, - regk_iop_sap_out_nand = 0x00000003, - regk_iop_sap_out_no = 0x00000000, - regk_iop_sap_out_none = 0x00000000, - regk_iop_sap_out_rw_bus0_default = 0x00000000, - regk_iop_sap_out_rw_bus0_hi_oe_default = 0x00000000, - regk_iop_sap_out_rw_bus0_lo_oe_default = 0x00000000, - regk_iop_sap_out_rw_bus1_default = 0x00000000, - regk_iop_sap_out_rw_bus1_hi_oe_default = 0x00000000, - regk_iop_sap_out_rw_bus1_lo_oe_default = 0x00000000, - regk_iop_sap_out_rw_gen_gated_default = 0x00000000, - regk_iop_sap_out_rw_gio_default = 0x00000000, - regk_iop_sap_out_rw_gio_size = 0x00000020, - regk_iop_sap_out_spu0_gio0 = 0x00000002, - regk_iop_sap_out_spu0_gio1 = 0x00000003, - regk_iop_sap_out_spu0_gio12 = 0x00000004, - regk_iop_sap_out_spu0_gio13 = 0x00000004, - regk_iop_sap_out_spu0_gio14 = 0x00000004, - regk_iop_sap_out_spu0_gio15 = 0x00000004, - regk_iop_sap_out_spu0_gio2 = 0x00000002, - regk_iop_sap_out_spu0_gio3 = 0x00000003, - regk_iop_sap_out_spu0_gio4 = 0x00000002, - regk_iop_sap_out_spu0_gio5 = 0x00000003, - regk_iop_sap_out_spu0_gio6 = 0x00000002, - regk_iop_sap_out_spu0_gio7 = 0x00000003, - regk_iop_sap_out_spu1_gio0 = 0x00000005, - regk_iop_sap_out_spu1_gio1 = 0x00000006, - regk_iop_sap_out_spu1_gio12 = 0x00000007, - regk_iop_sap_out_spu1_gio13 = 0x00000007, - regk_iop_sap_out_spu1_gio14 = 0x00000007, - regk_iop_sap_out_spu1_gio15 = 0x00000007, - regk_iop_sap_out_spu1_gio2 = 0x00000005, - regk_iop_sap_out_spu1_gio3 = 0x00000006, - regk_iop_sap_out_spu1_gio4 = 0x00000005, - regk_iop_sap_out_spu1_gio5 = 0x00000006, - regk_iop_sap_out_spu1_gio6 = 0x00000005, - regk_iop_sap_out_spu1_gio7 = 0x00000006, - regk_iop_sap_out_timer_grp0_tmr2 = 0x00000004, - regk_iop_sap_out_timer_grp1_tmr2 = 0x00000005, - regk_iop_sap_out_timer_grp2_tmr2 = 0x00000006, - regk_iop_sap_out_timer_grp3_tmr2 = 0x00000007, - regk_iop_sap_out_tmr = 0x00000005, - regk_iop_sap_out_yes = 0x00000001 -}; -#endif /* __iop_sap_out_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h deleted file mode 100644 index 4f0a9a81e737..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h +++ /dev/null @@ -1,160 +0,0 @@ -#ifndef __iop_scrc_in_defs_h -#define __iop_scrc_in_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_scrc_in.r - * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_scrc_in_defs.h ../../inst/io_proc/rtl/iop_scrc_in.r - * id: $Id: iop_scrc_in_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_scrc_in */ - -/* Register rw_cfg, scope iop_scrc_in, type rw */ -typedef struct { - unsigned int trig : 2; - unsigned int dummy1 : 30; -} reg_iop_scrc_in_rw_cfg; -#define REG_RD_ADDR_iop_scrc_in_rw_cfg 0 -#define REG_WR_ADDR_iop_scrc_in_rw_cfg 0 - -/* Register rw_ctrl, scope iop_scrc_in, type rw */ -typedef struct { - unsigned int dif_in_en : 1; - unsigned int dummy1 : 31; -} reg_iop_scrc_in_rw_ctrl; -#define REG_RD_ADDR_iop_scrc_in_rw_ctrl 4 -#define REG_WR_ADDR_iop_scrc_in_rw_ctrl 4 - -/* Register r_stat, scope iop_scrc_in, type r */ -typedef struct { - unsigned int err : 1; - unsigned int dummy1 : 31; -} reg_iop_scrc_in_r_stat; -#define REG_RD_ADDR_iop_scrc_in_r_stat 8 - -/* Register rw_init_crc, scope iop_scrc_in, type rw */ -typedef unsigned int reg_iop_scrc_in_rw_init_crc; -#define REG_RD_ADDR_iop_scrc_in_rw_init_crc 12 -#define REG_WR_ADDR_iop_scrc_in_rw_init_crc 12 - -/* Register rs_computed_crc, scope iop_scrc_in, type rs */ -typedef unsigned int reg_iop_scrc_in_rs_computed_crc; -#define REG_RD_ADDR_iop_scrc_in_rs_computed_crc 16 - -/* Register r_computed_crc, scope iop_scrc_in, type r */ -typedef unsigned int reg_iop_scrc_in_r_computed_crc; -#define REG_RD_ADDR_iop_scrc_in_r_computed_crc 20 - -/* Register rw_crc, scope iop_scrc_in, type rw */ -typedef unsigned int reg_iop_scrc_in_rw_crc; -#define REG_RD_ADDR_iop_scrc_in_rw_crc 24 -#define REG_WR_ADDR_iop_scrc_in_rw_crc 24 - -/* Register rw_correct_crc, scope iop_scrc_in, type rw */ -typedef unsigned int reg_iop_scrc_in_rw_correct_crc; -#define REG_RD_ADDR_iop_scrc_in_rw_correct_crc 28 -#define REG_WR_ADDR_iop_scrc_in_rw_correct_crc 28 - -/* Register rw_wr1bit, scope iop_scrc_in, type rw */ -typedef struct { - unsigned int data : 2; - unsigned int last : 2; - unsigned int dummy1 : 28; -} reg_iop_scrc_in_rw_wr1bit; -#define REG_RD_ADDR_iop_scrc_in_rw_wr1bit 32 -#define REG_WR_ADDR_iop_scrc_in_rw_wr1bit 32 - - -/* Constants */ -enum { - regk_iop_scrc_in_dif_in = 0x00000002, - regk_iop_scrc_in_hi = 0x00000000, - regk_iop_scrc_in_neg = 0x00000002, - regk_iop_scrc_in_no = 0x00000000, - regk_iop_scrc_in_pos = 0x00000001, - regk_iop_scrc_in_pos_neg = 0x00000003, - regk_iop_scrc_in_r_computed_crc_default = 0x00000000, - regk_iop_scrc_in_rs_computed_crc_default = 0x00000000, - regk_iop_scrc_in_rw_cfg_default = 0x00000000, - regk_iop_scrc_in_rw_ctrl_default = 0x00000000, - regk_iop_scrc_in_rw_init_crc_default = 0x00000000, - regk_iop_scrc_in_set0 = 0x00000000, - regk_iop_scrc_in_set1 = 0x00000001, - regk_iop_scrc_in_yes = 0x00000001 -}; -#endif /* __iop_scrc_in_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h deleted file mode 100644 index fd1d6ea1d484..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h +++ /dev/null @@ -1,146 +0,0 @@ -#ifndef __iop_scrc_out_defs_h -#define __iop_scrc_out_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_scrc_out.r - * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_scrc_out_defs.h ../../inst/io_proc/rtl/iop_scrc_out.r - * id: $Id: iop_scrc_out_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_scrc_out */ - -/* Register rw_cfg, scope iop_scrc_out, type rw */ -typedef struct { - unsigned int trig : 2; - unsigned int inv_crc : 1; - unsigned int dummy1 : 29; -} reg_iop_scrc_out_rw_cfg; -#define REG_RD_ADDR_iop_scrc_out_rw_cfg 0 -#define REG_WR_ADDR_iop_scrc_out_rw_cfg 0 - -/* Register rw_ctrl, scope iop_scrc_out, type rw */ -typedef struct { - unsigned int strb_src : 1; - unsigned int out_src : 1; - unsigned int dummy1 : 30; -} reg_iop_scrc_out_rw_ctrl; -#define REG_RD_ADDR_iop_scrc_out_rw_ctrl 4 -#define REG_WR_ADDR_iop_scrc_out_rw_ctrl 4 - -/* Register rw_init_crc, scope iop_scrc_out, type rw */ -typedef unsigned int reg_iop_scrc_out_rw_init_crc; -#define REG_RD_ADDR_iop_scrc_out_rw_init_crc 8 -#define REG_WR_ADDR_iop_scrc_out_rw_init_crc 8 - -/* Register rw_crc, scope iop_scrc_out, type rw */ -typedef unsigned int reg_iop_scrc_out_rw_crc; -#define REG_RD_ADDR_iop_scrc_out_rw_crc 12 -#define REG_WR_ADDR_iop_scrc_out_rw_crc 12 - -/* Register rw_data, scope iop_scrc_out, type rw */ -typedef struct { - unsigned int val : 1; - unsigned int dummy1 : 31; -} reg_iop_scrc_out_rw_data; -#define REG_RD_ADDR_iop_scrc_out_rw_data 16 -#define REG_WR_ADDR_iop_scrc_out_rw_data 16 - -/* Register r_computed_crc, scope iop_scrc_out, type r */ -typedef unsigned int reg_iop_scrc_out_r_computed_crc; -#define REG_RD_ADDR_iop_scrc_out_r_computed_crc 20 - - -/* Constants */ -enum { - regk_iop_scrc_out_crc = 0x00000001, - regk_iop_scrc_out_data = 0x00000000, - regk_iop_scrc_out_dif = 0x00000001, - regk_iop_scrc_out_hi = 0x00000000, - regk_iop_scrc_out_neg = 0x00000002, - regk_iop_scrc_out_no = 0x00000000, - regk_iop_scrc_out_pos = 0x00000001, - regk_iop_scrc_out_pos_neg = 0x00000003, - regk_iop_scrc_out_reg = 0x00000000, - regk_iop_scrc_out_rw_cfg_default = 0x00000000, - regk_iop_scrc_out_rw_crc_default = 0x00000000, - regk_iop_scrc_out_rw_ctrl_default = 0x00000000, - regk_iop_scrc_out_rw_data_default = 0x00000000, - regk_iop_scrc_out_rw_init_crc_default = 0x00000000, - regk_iop_scrc_out_yes = 0x00000001 -}; -#endif /* __iop_scrc_out_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h deleted file mode 100644 index 0fda26e2f06f..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h +++ /dev/null @@ -1,453 +0,0 @@ -#ifndef __iop_spu_defs_h -#define __iop_spu_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_spu.r - * id: - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_spu_defs.h ../../inst/io_proc/rtl/iop_spu.r - * id: $Id: iop_spu_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_spu */ - -#define STRIDE_iop_spu_rw_r 4 -/* Register rw_r, scope iop_spu, type rw */ -typedef unsigned int reg_iop_spu_rw_r; -#define REG_RD_ADDR_iop_spu_rw_r 0 -#define REG_WR_ADDR_iop_spu_rw_r 0 - -/* Register rw_seq_pc, scope iop_spu, type rw */ -typedef struct { - unsigned int addr : 12; - unsigned int dummy1 : 20; -} reg_iop_spu_rw_seq_pc; -#define REG_RD_ADDR_iop_spu_rw_seq_pc 64 -#define REG_WR_ADDR_iop_spu_rw_seq_pc 64 - -/* Register rw_fsm_pc, scope iop_spu, type rw */ -typedef struct { - unsigned int addr : 12; - unsigned int dummy1 : 20; -} reg_iop_spu_rw_fsm_pc; -#define REG_RD_ADDR_iop_spu_rw_fsm_pc 68 -#define REG_WR_ADDR_iop_spu_rw_fsm_pc 68 - -/* Register rw_ctrl, scope iop_spu, type rw */ -typedef struct { - unsigned int fsm : 1; - unsigned int en : 1; - unsigned int dummy1 : 30; -} reg_iop_spu_rw_ctrl; -#define REG_RD_ADDR_iop_spu_rw_ctrl 72 -#define REG_WR_ADDR_iop_spu_rw_ctrl 72 - -/* Register rw_fsm_inputs3_0, scope iop_spu, type rw */ -typedef struct { - unsigned int val0 : 5; - unsigned int src0 : 3; - unsigned int val1 : 5; - unsigned int src1 : 3; - unsigned int val2 : 5; - unsigned int src2 : 3; - unsigned int val3 : 5; - unsigned int src3 : 3; -} reg_iop_spu_rw_fsm_inputs3_0; -#define REG_RD_ADDR_iop_spu_rw_fsm_inputs3_0 76 -#define REG_WR_ADDR_iop_spu_rw_fsm_inputs3_0 76 - -/* Register rw_fsm_inputs7_4, scope iop_spu, type rw */ -typedef struct { - unsigned int val4 : 5; - unsigned int src4 : 3; - unsigned int val5 : 5; - unsigned int src5 : 3; - unsigned int val6 : 5; - unsigned int src6 : 3; - unsigned int val7 : 5; - unsigned int src7 : 3; -} reg_iop_spu_rw_fsm_inputs7_4; -#define REG_RD_ADDR_iop_spu_rw_fsm_inputs7_4 80 -#define REG_WR_ADDR_iop_spu_rw_fsm_inputs7_4 80 - -/* Register rw_gio_out, scope iop_spu, type rw */ -typedef unsigned int reg_iop_spu_rw_gio_out; -#define REG_RD_ADDR_iop_spu_rw_gio_out 84 -#define REG_WR_ADDR_iop_spu_rw_gio_out 84 - -/* Register rw_bus0_out, scope iop_spu, type rw */ -typedef unsigned int reg_iop_spu_rw_bus0_out; -#define REG_RD_ADDR_iop_spu_rw_bus0_out 88 -#define REG_WR_ADDR_iop_spu_rw_bus0_out 88 - -/* Register rw_bus1_out, scope iop_spu, type rw */ -typedef unsigned int reg_iop_spu_rw_bus1_out; -#define REG_RD_ADDR_iop_spu_rw_bus1_out 92 -#define REG_WR_ADDR_iop_spu_rw_bus1_out 92 - -/* Register r_gio_in, scope iop_spu, type r */ -typedef unsigned int reg_iop_spu_r_gio_in; -#define REG_RD_ADDR_iop_spu_r_gio_in 96 - -/* Register r_bus0_in, scope iop_spu, type r */ -typedef unsigned int reg_iop_spu_r_bus0_in; -#define REG_RD_ADDR_iop_spu_r_bus0_in 100 - -/* Register r_bus1_in, scope iop_spu, type r */ -typedef unsigned int reg_iop_spu_r_bus1_in; -#define REG_RD_ADDR_iop_spu_r_bus1_in 104 - -/* Register rw_gio_out_set, scope iop_spu, type rw */ -typedef unsigned int reg_iop_spu_rw_gio_out_set; -#define REG_RD_ADDR_iop_spu_rw_gio_out_set 108 -#define REG_WR_ADDR_iop_spu_rw_gio_out_set 108 - -/* Register rw_gio_out_clr, scope iop_spu, type rw */ -typedef unsigned int reg_iop_spu_rw_gio_out_clr; -#define REG_RD_ADDR_iop_spu_rw_gio_out_clr 112 -#define REG_WR_ADDR_iop_spu_rw_gio_out_clr 112 - -/* Register rs_wr_stat, scope iop_spu, type rs */ -typedef struct { - unsigned int r0 : 1; - unsigned int r1 : 1; - unsigned int r2 : 1; - unsigned int r3 : 1; - unsigned int r4 : 1; - unsigned int r5 : 1; - unsigned int r6 : 1; - unsigned int r7 : 1; - unsigned int r8 : 1; - unsigned int r9 : 1; - unsigned int r10 : 1; - unsigned int r11 : 1; - unsigned int r12 : 1; - unsigned int r13 : 1; - unsigned int r14 : 1; - unsigned int r15 : 1; - unsigned int dummy1 : 16; -} reg_iop_spu_rs_wr_stat; -#define REG_RD_ADDR_iop_spu_rs_wr_stat 116 - -/* Register r_wr_stat, scope iop_spu, type r */ -typedef struct { - unsigned int r0 : 1; - unsigned int r1 : 1; - unsigned int r2 : 1; - unsigned int r3 : 1; - unsigned int r4 : 1; - unsigned int r5 : 1; - unsigned int r6 : 1; - unsigned int r7 : 1; - unsigned int r8 : 1; - unsigned int r9 : 1; - unsigned int r10 : 1; - unsigned int r11 : 1; - unsigned int r12 : 1; - unsigned int r13 : 1; - unsigned int r14 : 1; - unsigned int r15 : 1; - unsigned int dummy1 : 16; -} reg_iop_spu_r_wr_stat; -#define REG_RD_ADDR_iop_spu_r_wr_stat 120 - -/* Register r_reg_indexed_by_bus0_in, scope iop_spu, type r */ -typedef unsigned int reg_iop_spu_r_reg_indexed_by_bus0_in; -#define REG_RD_ADDR_iop_spu_r_reg_indexed_by_bus0_in 124 - -/* Register r_stat_in, scope iop_spu, type r */ -typedef struct { - unsigned int timer_grp_lo : 4; - unsigned int fifo_out_last : 1; - unsigned int fifo_out_rdy : 1; - unsigned int fifo_out_all : 1; - unsigned int fifo_in_rdy : 1; - unsigned int dmc_out_all : 1; - unsigned int dmc_out_dth : 1; - unsigned int dmc_out_eop : 1; - unsigned int dmc_out_dv : 1; - unsigned int dmc_out_last : 1; - unsigned int dmc_out_cmd_rq : 1; - unsigned int dmc_out_cmd_rdy : 1; - unsigned int pcrc_correct : 1; - unsigned int timer_grp_hi : 4; - unsigned int dmc_in_sth : 1; - unsigned int dmc_in_full : 1; - unsigned int dmc_in_cmd_rdy : 1; - unsigned int spu_gio_out : 4; - unsigned int sync_clk12 : 1; - unsigned int scrc_out_data : 1; - unsigned int scrc_in_err : 1; - unsigned int mc_busy : 1; - unsigned int mc_owned : 1; -} reg_iop_spu_r_stat_in; -#define REG_RD_ADDR_iop_spu_r_stat_in 128 - -/* Register r_trigger_in, scope iop_spu, type r */ -typedef unsigned int reg_iop_spu_r_trigger_in; -#define REG_RD_ADDR_iop_spu_r_trigger_in 132 - -/* Register r_special_stat, scope iop_spu, type r */ -typedef struct { - unsigned int c_flag : 1; - unsigned int v_flag : 1; - unsigned int z_flag : 1; - unsigned int n_flag : 1; - unsigned int xor_bus0_r2_0 : 1; - unsigned int xor_bus1_r3_0 : 1; - unsigned int xor_bus0m_r2_0 : 1; - unsigned int xor_bus1m_r3_0 : 1; - unsigned int fsm_in0 : 1; - unsigned int fsm_in1 : 1; - unsigned int fsm_in2 : 1; - unsigned int fsm_in3 : 1; - unsigned int fsm_in4 : 1; - unsigned int fsm_in5 : 1; - unsigned int fsm_in6 : 1; - unsigned int fsm_in7 : 1; - unsigned int event0 : 1; - unsigned int event1 : 1; - unsigned int event2 : 1; - unsigned int event3 : 1; - unsigned int dummy1 : 12; -} reg_iop_spu_r_special_stat; -#define REG_RD_ADDR_iop_spu_r_special_stat 136 - -/* Register rw_reg_access, scope iop_spu, type rw */ -typedef struct { - unsigned int addr : 13; - unsigned int dummy1 : 3; - unsigned int imm_hi : 16; -} reg_iop_spu_rw_reg_access; -#define REG_RD_ADDR_iop_spu_rw_reg_access 140 -#define REG_WR_ADDR_iop_spu_rw_reg_access 140 - -#define STRIDE_iop_spu_rw_event_cfg 4 -/* Register rw_event_cfg, scope iop_spu, type rw */ -typedef struct { - unsigned int addr : 12; - unsigned int src : 2; - unsigned int eq_en : 1; - unsigned int eq_inv : 1; - unsigned int gt_en : 1; - unsigned int gt_inv : 1; - unsigned int dummy1 : 14; -} reg_iop_spu_rw_event_cfg; -#define REG_RD_ADDR_iop_spu_rw_event_cfg 144 -#define REG_WR_ADDR_iop_spu_rw_event_cfg 144 - -#define STRIDE_iop_spu_rw_event_mask 4 -/* Register rw_event_mask, scope iop_spu, type rw */ -typedef unsigned int reg_iop_spu_rw_event_mask; -#define REG_RD_ADDR_iop_spu_rw_event_mask 160 -#define REG_WR_ADDR_iop_spu_rw_event_mask 160 - -#define STRIDE_iop_spu_rw_event_val 4 -/* Register rw_event_val, scope iop_spu, type rw */ -typedef unsigned int reg_iop_spu_rw_event_val; -#define REG_RD_ADDR_iop_spu_rw_event_val 176 -#define REG_WR_ADDR_iop_spu_rw_event_val 176 - -/* Register rw_event_ret, scope iop_spu, type rw */ -typedef struct { - unsigned int addr : 12; - unsigned int dummy1 : 20; -} reg_iop_spu_rw_event_ret; -#define REG_RD_ADDR_iop_spu_rw_event_ret 192 -#define REG_WR_ADDR_iop_spu_rw_event_ret 192 - -/* Register r_trace, scope iop_spu, type r */ -typedef struct { - unsigned int fsm : 1; - unsigned int en : 1; - unsigned int c_flag : 1; - unsigned int v_flag : 1; - unsigned int z_flag : 1; - unsigned int n_flag : 1; - unsigned int seq_addr : 12; - unsigned int dummy1 : 2; - unsigned int fsm_addr : 12; -} reg_iop_spu_r_trace; -#define REG_RD_ADDR_iop_spu_r_trace 196 - -/* Register r_fsm_trace, scope iop_spu, type r */ -typedef struct { - unsigned int fsm : 1; - unsigned int en : 1; - unsigned int tmr_done : 1; - unsigned int inp0 : 1; - unsigned int inp1 : 1; - unsigned int inp2 : 1; - unsigned int inp3 : 1; - unsigned int event0 : 1; - unsigned int event1 : 1; - unsigned int event2 : 1; - unsigned int event3 : 1; - unsigned int gio_out : 8; - unsigned int dummy1 : 1; - unsigned int fsm_addr : 12; -} reg_iop_spu_r_fsm_trace; -#define REG_RD_ADDR_iop_spu_r_fsm_trace 200 - -#define STRIDE_iop_spu_rw_brp 4 -/* Register rw_brp, scope iop_spu, type rw */ -typedef struct { - unsigned int addr : 12; - unsigned int fsm : 1; - unsigned int en : 1; - unsigned int dummy1 : 18; -} reg_iop_spu_rw_brp; -#define REG_RD_ADDR_iop_spu_rw_brp 204 -#define REG_WR_ADDR_iop_spu_rw_brp 204 - - -/* Constants */ -enum { - regk_iop_spu_attn_hi = 0x00000005, - regk_iop_spu_attn_lo = 0x00000005, - regk_iop_spu_attn_r0 = 0x00000000, - regk_iop_spu_attn_r1 = 0x00000001, - regk_iop_spu_attn_r10 = 0x00000002, - regk_iop_spu_attn_r11 = 0x00000003, - regk_iop_spu_attn_r12 = 0x00000004, - regk_iop_spu_attn_r13 = 0x00000005, - regk_iop_spu_attn_r14 = 0x00000006, - regk_iop_spu_attn_r15 = 0x00000007, - regk_iop_spu_attn_r2 = 0x00000002, - regk_iop_spu_attn_r3 = 0x00000003, - regk_iop_spu_attn_r4 = 0x00000004, - regk_iop_spu_attn_r5 = 0x00000005, - regk_iop_spu_attn_r6 = 0x00000006, - regk_iop_spu_attn_r7 = 0x00000007, - regk_iop_spu_attn_r8 = 0x00000000, - regk_iop_spu_attn_r9 = 0x00000001, - regk_iop_spu_c = 0x00000000, - regk_iop_spu_flag = 0x00000002, - regk_iop_spu_gio_in = 0x00000000, - regk_iop_spu_gio_out = 0x00000005, - regk_iop_spu_gio_out0 = 0x00000008, - regk_iop_spu_gio_out1 = 0x00000009, - regk_iop_spu_gio_out2 = 0x0000000a, - regk_iop_spu_gio_out3 = 0x0000000b, - regk_iop_spu_gio_out4 = 0x0000000c, - regk_iop_spu_gio_out5 = 0x0000000d, - regk_iop_spu_gio_out6 = 0x0000000e, - regk_iop_spu_gio_out7 = 0x0000000f, - regk_iop_spu_n = 0x00000003, - regk_iop_spu_no = 0x00000000, - regk_iop_spu_r0 = 0x00000008, - regk_iop_spu_r1 = 0x00000009, - regk_iop_spu_r10 = 0x0000000a, - regk_iop_spu_r11 = 0x0000000b, - regk_iop_spu_r12 = 0x0000000c, - regk_iop_spu_r13 = 0x0000000d, - regk_iop_spu_r14 = 0x0000000e, - regk_iop_spu_r15 = 0x0000000f, - regk_iop_spu_r2 = 0x0000000a, - regk_iop_spu_r3 = 0x0000000b, - regk_iop_spu_r4 = 0x0000000c, - regk_iop_spu_r5 = 0x0000000d, - regk_iop_spu_r6 = 0x0000000e, - regk_iop_spu_r7 = 0x0000000f, - regk_iop_spu_r8 = 0x00000008, - regk_iop_spu_r9 = 0x00000009, - regk_iop_spu_reg_hi = 0x00000002, - regk_iop_spu_reg_lo = 0x00000002, - regk_iop_spu_rw_brp_default = 0x00000000, - regk_iop_spu_rw_brp_size = 0x00000004, - regk_iop_spu_rw_ctrl_default = 0x00000000, - regk_iop_spu_rw_event_cfg_size = 0x00000004, - regk_iop_spu_rw_event_mask_size = 0x00000004, - regk_iop_spu_rw_event_val_size = 0x00000004, - regk_iop_spu_rw_gio_out_default = 0x00000000, - regk_iop_spu_rw_r_size = 0x00000010, - regk_iop_spu_rw_reg_access_default = 0x00000000, - regk_iop_spu_stat_in = 0x00000002, - regk_iop_spu_statin_hi = 0x00000004, - regk_iop_spu_statin_lo = 0x00000004, - regk_iop_spu_trig = 0x00000003, - regk_iop_spu_trigger = 0x00000006, - regk_iop_spu_v = 0x00000001, - regk_iop_spu_wsts_gioout_spec = 0x00000001, - regk_iop_spu_xor = 0x00000003, - regk_iop_spu_xor_bus0_r2_0 = 0x00000000, - regk_iop_spu_xor_bus0m_r2_0 = 0x00000002, - regk_iop_spu_xor_bus1_r3_0 = 0x00000001, - regk_iop_spu_xor_bus1m_r3_0 = 0x00000003, - regk_iop_spu_yes = 0x00000001, - regk_iop_spu_z = 0x00000002 -}; -#endif /* __iop_spu_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h deleted file mode 100644 index d7b6d75884d2..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h +++ /dev/null @@ -1,1042 +0,0 @@ -#ifndef __iop_sw_cfg_defs_h -#define __iop_sw_cfg_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_cfg_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r - * id: $Id: iop_sw_cfg_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sw_cfg */ - -/* Register rw_crc_par0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_crc_par0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_crc_par0_owner 0 -#define REG_WR_ADDR_iop_sw_cfg_rw_crc_par0_owner 0 - -/* Register rw_crc_par1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_crc_par1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_crc_par1_owner 4 -#define REG_WR_ADDR_iop_sw_cfg_rw_crc_par1_owner 4 - -/* Register rw_dmc_in0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_dmc_in0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_in0_owner 8 -#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_in0_owner 8 - -/* Register rw_dmc_in1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_dmc_in1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_in1_owner 12 -#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_in1_owner 12 - -/* Register rw_dmc_out0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_dmc_out0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_out0_owner 16 -#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_out0_owner 16 - -/* Register rw_dmc_out1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_dmc_out1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_out1_owner 20 -#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_out1_owner 20 - -/* Register rw_fifo_in0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_in0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in0_owner 24 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in0_owner 24 - -/* Register rw_fifo_in0_extra_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_in0_extra_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in0_extra_owner 28 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in0_extra_owner 28 - -/* Register rw_fifo_in1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_in1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in1_owner 32 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in1_owner 32 - -/* Register rw_fifo_in1_extra_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_in1_extra_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in1_extra_owner 36 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in1_extra_owner 36 - -/* Register rw_fifo_out0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_out0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out0_owner 40 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out0_owner 40 - -/* Register rw_fifo_out0_extra_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_out0_extra_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out0_extra_owner 44 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out0_extra_owner 44 - -/* Register rw_fifo_out1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_out1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out1_owner 48 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out1_owner 48 - -/* Register rw_fifo_out1_extra_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_out1_extra_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out1_extra_owner 52 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out1_extra_owner 52 - -/* Register rw_sap_in_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_sap_in_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_sap_in_owner 56 -#define REG_WR_ADDR_iop_sw_cfg_rw_sap_in_owner 56 - -/* Register rw_sap_out_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_sap_out_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_sap_out_owner 60 -#define REG_WR_ADDR_iop_sw_cfg_rw_sap_out_owner 60 - -/* Register rw_scrc_in0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_scrc_in0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_in0_owner 64 -#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_in0_owner 64 - -/* Register rw_scrc_in1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_scrc_in1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_in1_owner 68 -#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_in1_owner 68 - -/* Register rw_scrc_out0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_scrc_out0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_out0_owner 72 -#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_out0_owner 72 - -/* Register rw_scrc_out1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_scrc_out1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_out1_owner 76 -#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_out1_owner 76 - -/* Register rw_spu0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_spu0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_spu0_owner 80 -#define REG_WR_ADDR_iop_sw_cfg_rw_spu0_owner 80 - -/* Register rw_spu1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_spu1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_spu1_owner 84 -#define REG_WR_ADDR_iop_sw_cfg_rw_spu1_owner 84 - -/* Register rw_timer_grp0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_timer_grp0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp0_owner 88 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp0_owner 88 - -/* Register rw_timer_grp1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_timer_grp1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp1_owner 92 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp1_owner 92 - -/* Register rw_timer_grp2_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_timer_grp2_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp2_owner 96 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp2_owner 96 - -/* Register rw_timer_grp3_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_timer_grp3_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp3_owner 100 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp3_owner 100 - -/* Register rw_trigger_grp0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp0_owner 104 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp0_owner 104 - -/* Register rw_trigger_grp1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp1_owner 108 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp1_owner 108 - -/* Register rw_trigger_grp2_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp2_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp2_owner 112 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp2_owner 112 - -/* Register rw_trigger_grp3_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp3_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp3_owner 116 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp3_owner 116 - -/* Register rw_trigger_grp4_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp4_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp4_owner 120 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp4_owner 120 - -/* Register rw_trigger_grp5_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp5_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp5_owner 124 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp5_owner 124 - -/* Register rw_trigger_grp6_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp6_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp6_owner 128 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp6_owner 128 - -/* Register rw_trigger_grp7_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp7_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp7_owner 132 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp7_owner 132 - -/* Register rw_bus0_mask, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_cfg_rw_bus0_mask; -#define REG_RD_ADDR_iop_sw_cfg_rw_bus0_mask 136 -#define REG_WR_ADDR_iop_sw_cfg_rw_bus0_mask 136 - -/* Register rw_bus0_oe_mask, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_cfg_rw_bus0_oe_mask; -#define REG_RD_ADDR_iop_sw_cfg_rw_bus0_oe_mask 140 -#define REG_WR_ADDR_iop_sw_cfg_rw_bus0_oe_mask 140 - -/* Register rw_bus1_mask, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_cfg_rw_bus1_mask; -#define REG_RD_ADDR_iop_sw_cfg_rw_bus1_mask 144 -#define REG_WR_ADDR_iop_sw_cfg_rw_bus1_mask 144 - -/* Register rw_bus1_oe_mask, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_cfg_rw_bus1_oe_mask; -#define REG_RD_ADDR_iop_sw_cfg_rw_bus1_oe_mask 148 -#define REG_WR_ADDR_iop_sw_cfg_rw_bus1_oe_mask 148 - -/* Register rw_gio_mask, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cfg_rw_gio_mask; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_mask 152 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_mask 152 - -/* Register rw_gio_oe_mask, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cfg_rw_gio_oe_mask; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_oe_mask 156 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_oe_mask 156 - -/* Register rw_pinmapping, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int bus0_byte0 : 2; - unsigned int bus0_byte1 : 2; - unsigned int bus0_byte2 : 2; - unsigned int bus0_byte3 : 2; - unsigned int bus1_byte0 : 2; - unsigned int bus1_byte1 : 2; - unsigned int bus1_byte2 : 2; - unsigned int bus1_byte3 : 2; - unsigned int gio3_0 : 2; - unsigned int gio7_4 : 2; - unsigned int gio11_8 : 2; - unsigned int gio15_12 : 2; - unsigned int gio19_16 : 2; - unsigned int gio23_20 : 2; - unsigned int gio27_24 : 2; - unsigned int gio31_28 : 2; -} reg_iop_sw_cfg_rw_pinmapping; -#define REG_RD_ADDR_iop_sw_cfg_rw_pinmapping 160 -#define REG_WR_ADDR_iop_sw_cfg_rw_pinmapping 160 - -/* Register rw_bus_out_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int bus0_lo : 3; - unsigned int bus0_hi : 3; - unsigned int bus0_lo_oe : 3; - unsigned int bus0_hi_oe : 3; - unsigned int bus1_lo : 3; - unsigned int bus1_hi : 3; - unsigned int bus1_lo_oe : 3; - unsigned int bus1_hi_oe : 3; - unsigned int dummy1 : 8; -} reg_iop_sw_cfg_rw_bus_out_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_bus_out_cfg 164 -#define REG_WR_ADDR_iop_sw_cfg_rw_bus_out_cfg 164 - -/* Register rw_gio_out_grp0_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio0 : 4; - unsigned int gio0_oe : 2; - unsigned int gio1 : 4; - unsigned int gio1_oe : 2; - unsigned int gio2 : 4; - unsigned int gio2_oe : 2; - unsigned int gio3 : 4; - unsigned int gio3_oe : 2; - unsigned int dummy1 : 8; -} reg_iop_sw_cfg_rw_gio_out_grp0_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp0_cfg 168 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp0_cfg 168 - -/* Register rw_gio_out_grp1_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio4 : 4; - unsigned int gio4_oe : 2; - unsigned int gio5 : 4; - unsigned int gio5_oe : 2; - unsigned int gio6 : 4; - unsigned int gio6_oe : 2; - unsigned int gio7 : 4; - unsigned int gio7_oe : 2; - unsigned int dummy1 : 8; -} reg_iop_sw_cfg_rw_gio_out_grp1_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp1_cfg 172 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp1_cfg 172 - -/* Register rw_gio_out_grp2_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio8 : 4; - unsigned int gio8_oe : 2; - unsigned int gio9 : 4; - unsigned int gio9_oe : 2; - unsigned int gio10 : 4; - unsigned int gio10_oe : 2; - unsigned int gio11 : 4; - unsigned int gio11_oe : 2; - unsigned int dummy1 : 8; -} reg_iop_sw_cfg_rw_gio_out_grp2_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp2_cfg 176 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp2_cfg 176 - -/* Register rw_gio_out_grp3_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio12 : 4; - unsigned int gio12_oe : 2; - unsigned int gio13 : 4; - unsigned int gio13_oe : 2; - unsigned int gio14 : 4; - unsigned int gio14_oe : 2; - unsigned int gio15 : 4; - unsigned int gio15_oe : 2; - unsigned int dummy1 : 8; -} reg_iop_sw_cfg_rw_gio_out_grp3_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp3_cfg 180 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp3_cfg 180 - -/* Register rw_gio_out_grp4_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio16 : 4; - unsigned int gio16_oe : 2; - unsigned int gio17 : 4; - unsigned int gio17_oe : 2; - unsigned int gio18 : 4; - unsigned int gio18_oe : 2; - unsigned int gio19 : 4; - unsigned int gio19_oe : 2; - unsigned int dummy1 : 8; -} reg_iop_sw_cfg_rw_gio_out_grp4_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp4_cfg 184 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp4_cfg 184 - -/* Register rw_gio_out_grp5_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio20 : 4; - unsigned int gio20_oe : 2; - unsigned int gio21 : 4; - unsigned int gio21_oe : 2; - unsigned int gio22 : 4; - unsigned int gio22_oe : 2; - unsigned int gio23 : 4; - unsigned int gio23_oe : 2; - unsigned int dummy1 : 8; -} reg_iop_sw_cfg_rw_gio_out_grp5_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp5_cfg 188 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp5_cfg 188 - -/* Register rw_gio_out_grp6_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio24 : 4; - unsigned int gio24_oe : 2; - unsigned int gio25 : 4; - unsigned int gio25_oe : 2; - unsigned int gio26 : 4; - unsigned int gio26_oe : 2; - unsigned int gio27 : 4; - unsigned int gio27_oe : 2; - unsigned int dummy1 : 8; -} reg_iop_sw_cfg_rw_gio_out_grp6_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp6_cfg 192 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp6_cfg 192 - -/* Register rw_gio_out_grp7_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio28 : 4; - unsigned int gio28_oe : 2; - unsigned int gio29 : 4; - unsigned int gio29_oe : 2; - unsigned int gio30 : 4; - unsigned int gio30_oe : 2; - unsigned int gio31 : 4; - unsigned int gio31_oe : 2; - unsigned int dummy1 : 8; -} reg_iop_sw_cfg_rw_gio_out_grp7_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp7_cfg 196 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp7_cfg 196 - -/* Register rw_spu0_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int bus0_in : 2; - unsigned int bus1_in : 2; - unsigned int dummy1 : 28; -} reg_iop_sw_cfg_rw_spu0_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_spu0_cfg 200 -#define REG_WR_ADDR_iop_sw_cfg_rw_spu0_cfg 200 - -/* Register rw_spu1_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int bus0_in : 2; - unsigned int bus1_in : 2; - unsigned int dummy1 : 28; -} reg_iop_sw_cfg_rw_spu1_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_spu1_cfg 204 -#define REG_WR_ADDR_iop_sw_cfg_rw_spu1_cfg 204 - -/* Register rw_timer_grp0_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int ext_clk : 3; - unsigned int tmr0_en : 1; - unsigned int tmr1_en : 1; - unsigned int tmr2_en : 1; - unsigned int tmr3_en : 1; - unsigned int tmr0_dis : 1; - unsigned int tmr1_dis : 1; - unsigned int tmr2_dis : 1; - unsigned int tmr3_dis : 1; - unsigned int dummy1 : 21; -} reg_iop_sw_cfg_rw_timer_grp0_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp0_cfg 208 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp0_cfg 208 - -/* Register rw_timer_grp1_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int ext_clk : 3; - unsigned int tmr0_en : 1; - unsigned int tmr1_en : 1; - unsigned int tmr2_en : 1; - unsigned int tmr3_en : 1; - unsigned int tmr0_dis : 1; - unsigned int tmr1_dis : 1; - unsigned int tmr2_dis : 1; - unsigned int tmr3_dis : 1; - unsigned int dummy1 : 21; -} reg_iop_sw_cfg_rw_timer_grp1_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp1_cfg 212 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp1_cfg 212 - -/* Register rw_timer_grp2_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int ext_clk : 3; - unsigned int tmr0_en : 1; - unsigned int tmr1_en : 1; - unsigned int tmr2_en : 1; - unsigned int tmr3_en : 1; - unsigned int tmr0_dis : 1; - unsigned int tmr1_dis : 1; - unsigned int tmr2_dis : 1; - unsigned int tmr3_dis : 1; - unsigned int dummy1 : 21; -} reg_iop_sw_cfg_rw_timer_grp2_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp2_cfg 216 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp2_cfg 216 - -/* Register rw_timer_grp3_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int ext_clk : 3; - unsigned int tmr0_en : 1; - unsigned int tmr1_en : 1; - unsigned int tmr2_en : 1; - unsigned int tmr3_en : 1; - unsigned int tmr0_dis : 1; - unsigned int tmr1_dis : 1; - unsigned int tmr2_dis : 1; - unsigned int tmr3_dis : 1; - unsigned int dummy1 : 21; -} reg_iop_sw_cfg_rw_timer_grp3_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp3_cfg 220 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp3_cfg 220 - -/* Register rw_trigger_grps_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int grp0_dis : 1; - unsigned int grp0_en : 1; - unsigned int grp1_dis : 1; - unsigned int grp1_en : 1; - unsigned int grp2_dis : 1; - unsigned int grp2_en : 1; - unsigned int grp3_dis : 1; - unsigned int grp3_en : 1; - unsigned int grp4_dis : 1; - unsigned int grp4_en : 1; - unsigned int grp5_dis : 1; - unsigned int grp5_en : 1; - unsigned int grp6_dis : 1; - unsigned int grp6_en : 1; - unsigned int grp7_dis : 1; - unsigned int grp7_en : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cfg_rw_trigger_grps_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grps_cfg 224 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grps_cfg 224 - -/* Register rw_pdp0_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int dmc0_usr : 1; - unsigned int out_strb : 5; - unsigned int in_src : 3; - unsigned int in_size : 3; - unsigned int in_last : 2; - unsigned int in_strb : 4; - unsigned int out_src : 1; - unsigned int dummy1 : 13; -} reg_iop_sw_cfg_rw_pdp0_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_pdp0_cfg 228 -#define REG_WR_ADDR_iop_sw_cfg_rw_pdp0_cfg 228 - -/* Register rw_pdp1_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int dmc1_usr : 1; - unsigned int out_strb : 5; - unsigned int in_src : 3; - unsigned int in_size : 3; - unsigned int in_last : 2; - unsigned int in_strb : 4; - unsigned int out_src : 1; - unsigned int dummy1 : 13; -} reg_iop_sw_cfg_rw_pdp1_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_pdp1_cfg 232 -#define REG_WR_ADDR_iop_sw_cfg_rw_pdp1_cfg 232 - -/* Register rw_sdp_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int sdp_out0_strb : 3; - unsigned int sdp_out1_strb : 3; - unsigned int sdp_in0_data : 3; - unsigned int sdp_in0_last : 2; - unsigned int sdp_in0_strb : 3; - unsigned int sdp_in1_data : 3; - unsigned int sdp_in1_last : 2; - unsigned int sdp_in1_strb : 3; - unsigned int dummy1 : 10; -} reg_iop_sw_cfg_rw_sdp_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_sdp_cfg 236 -#define REG_WR_ADDR_iop_sw_cfg_rw_sdp_cfg 236 - - -/* Constants */ -enum { - regk_iop_sw_cfg_a = 0x00000001, - regk_iop_sw_cfg_b = 0x00000002, - regk_iop_sw_cfg_bus0 = 0x00000000, - regk_iop_sw_cfg_bus0_rot16 = 0x00000004, - regk_iop_sw_cfg_bus0_rot24 = 0x00000006, - regk_iop_sw_cfg_bus0_rot8 = 0x00000002, - regk_iop_sw_cfg_bus1 = 0x00000001, - regk_iop_sw_cfg_bus1_rot16 = 0x00000005, - regk_iop_sw_cfg_bus1_rot24 = 0x00000007, - regk_iop_sw_cfg_bus1_rot8 = 0x00000003, - regk_iop_sw_cfg_clk12 = 0x00000000, - regk_iop_sw_cfg_cpu = 0x00000000, - regk_iop_sw_cfg_dmc0 = 0x00000000, - regk_iop_sw_cfg_dmc1 = 0x00000001, - regk_iop_sw_cfg_gated_clk0 = 0x00000010, - regk_iop_sw_cfg_gated_clk1 = 0x00000011, - regk_iop_sw_cfg_gated_clk2 = 0x00000012, - regk_iop_sw_cfg_gated_clk3 = 0x00000013, - regk_iop_sw_cfg_gio0 = 0x00000004, - regk_iop_sw_cfg_gio1 = 0x00000001, - regk_iop_sw_cfg_gio2 = 0x00000005, - regk_iop_sw_cfg_gio3 = 0x00000002, - regk_iop_sw_cfg_gio4 = 0x00000006, - regk_iop_sw_cfg_gio5 = 0x00000003, - regk_iop_sw_cfg_gio6 = 0x00000007, - regk_iop_sw_cfg_gio7 = 0x00000004, - regk_iop_sw_cfg_gio_in0 = 0x00000000, - regk_iop_sw_cfg_gio_in1 = 0x00000001, - regk_iop_sw_cfg_gio_in10 = 0x00000002, - regk_iop_sw_cfg_gio_in11 = 0x00000003, - regk_iop_sw_cfg_gio_in14 = 0x00000004, - regk_iop_sw_cfg_gio_in15 = 0x00000005, - regk_iop_sw_cfg_gio_in18 = 0x00000002, - regk_iop_sw_cfg_gio_in19 = 0x00000003, - regk_iop_sw_cfg_gio_in20 = 0x00000004, - regk_iop_sw_cfg_gio_in21 = 0x00000005, - regk_iop_sw_cfg_gio_in26 = 0x00000006, - regk_iop_sw_cfg_gio_in27 = 0x00000007, - regk_iop_sw_cfg_gio_in28 = 0x00000006, - regk_iop_sw_cfg_gio_in29 = 0x00000007, - regk_iop_sw_cfg_gio_in4 = 0x00000000, - regk_iop_sw_cfg_gio_in5 = 0x00000001, - regk_iop_sw_cfg_last_timer_grp0_tmr2 = 0x00000001, - regk_iop_sw_cfg_last_timer_grp1_tmr2 = 0x00000001, - regk_iop_sw_cfg_last_timer_grp2_tmr2 = 0x00000002, - regk_iop_sw_cfg_last_timer_grp2_tmr3 = 0x00000003, - regk_iop_sw_cfg_last_timer_grp3_tmr2 = 0x00000002, - regk_iop_sw_cfg_last_timer_grp3_tmr3 = 0x00000003, - regk_iop_sw_cfg_mpu = 0x00000001, - regk_iop_sw_cfg_none = 0x00000000, - regk_iop_sw_cfg_par0 = 0x00000000, - regk_iop_sw_cfg_par1 = 0x00000001, - regk_iop_sw_cfg_pdp_out0 = 0x00000002, - regk_iop_sw_cfg_pdp_out0_hi = 0x00000001, - regk_iop_sw_cfg_pdp_out0_hi_rot8 = 0x00000005, - regk_iop_sw_cfg_pdp_out0_lo = 0x00000000, - regk_iop_sw_cfg_pdp_out0_lo_rot8 = 0x00000004, - regk_iop_sw_cfg_pdp_out1 = 0x00000003, - regk_iop_sw_cfg_pdp_out1_hi = 0x00000003, - regk_iop_sw_cfg_pdp_out1_hi_rot8 = 0x00000005, - regk_iop_sw_cfg_pdp_out1_lo = 0x00000002, - regk_iop_sw_cfg_pdp_out1_lo_rot8 = 0x00000004, - regk_iop_sw_cfg_rw_bus0_mask_default = 0x00000000, - regk_iop_sw_cfg_rw_bus0_oe_mask_default = 0x00000000, - regk_iop_sw_cfg_rw_bus1_mask_default = 0x00000000, - regk_iop_sw_cfg_rw_bus1_oe_mask_default = 0x00000000, - regk_iop_sw_cfg_rw_bus_out_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_crc_par0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_crc_par1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_dmc_in0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_dmc_in1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_dmc_out0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_dmc_out1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_in0_extra_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_in0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_in1_extra_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_in1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_out0_extra_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_out0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_out1_extra_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_out1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_mask_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_oe_mask_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp0_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp1_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp2_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp3_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp4_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp5_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp6_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp7_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_pdp0_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_pdp1_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_pinmapping_default = 0x55555555, - regk_iop_sw_cfg_rw_sap_in_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_sap_out_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_scrc_in0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_scrc_in1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_scrc_out0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_scrc_out1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_sdp_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_spu0_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_spu0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_spu1_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_spu1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp0_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp1_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp2_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp2_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp3_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp3_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp2_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp3_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp4_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp5_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp6_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp7_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grps_cfg_default = 0x00000000, - regk_iop_sw_cfg_sdp_out0 = 0x00000008, - regk_iop_sw_cfg_sdp_out1 = 0x00000009, - regk_iop_sw_cfg_size16 = 0x00000002, - regk_iop_sw_cfg_size24 = 0x00000003, - regk_iop_sw_cfg_size32 = 0x00000004, - regk_iop_sw_cfg_size8 = 0x00000001, - regk_iop_sw_cfg_spu0 = 0x00000002, - regk_iop_sw_cfg_spu0_bus_out0_hi = 0x00000006, - regk_iop_sw_cfg_spu0_bus_out0_lo = 0x00000006, - regk_iop_sw_cfg_spu0_bus_out1_hi = 0x00000007, - regk_iop_sw_cfg_spu0_bus_out1_lo = 0x00000007, - regk_iop_sw_cfg_spu0_g0 = 0x0000000e, - regk_iop_sw_cfg_spu0_g1 = 0x0000000e, - regk_iop_sw_cfg_spu0_g2 = 0x0000000e, - regk_iop_sw_cfg_spu0_g3 = 0x0000000e, - regk_iop_sw_cfg_spu0_g4 = 0x0000000e, - regk_iop_sw_cfg_spu0_g5 = 0x0000000e, - regk_iop_sw_cfg_spu0_g6 = 0x0000000e, - regk_iop_sw_cfg_spu0_g7 = 0x0000000e, - regk_iop_sw_cfg_spu0_gio0 = 0x00000000, - regk_iop_sw_cfg_spu0_gio1 = 0x00000001, - regk_iop_sw_cfg_spu0_gio2 = 0x00000000, - regk_iop_sw_cfg_spu0_gio5 = 0x00000005, - regk_iop_sw_cfg_spu0_gio6 = 0x00000006, - regk_iop_sw_cfg_spu0_gio7 = 0x00000007, - regk_iop_sw_cfg_spu0_gio_out0 = 0x00000008, - regk_iop_sw_cfg_spu0_gio_out1 = 0x00000009, - regk_iop_sw_cfg_spu0_gio_out2 = 0x0000000a, - regk_iop_sw_cfg_spu0_gio_out3 = 0x0000000b, - regk_iop_sw_cfg_spu0_gio_out4 = 0x0000000c, - regk_iop_sw_cfg_spu0_gio_out5 = 0x0000000d, - regk_iop_sw_cfg_spu0_gio_out6 = 0x0000000e, - regk_iop_sw_cfg_spu0_gio_out7 = 0x0000000f, - regk_iop_sw_cfg_spu0_gioout0 = 0x00000000, - regk_iop_sw_cfg_spu0_gioout1 = 0x00000000, - regk_iop_sw_cfg_spu0_gioout10 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout11 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout12 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout13 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout14 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout15 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout16 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout17 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout18 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout19 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout2 = 0x00000002, - regk_iop_sw_cfg_spu0_gioout20 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout21 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout22 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout23 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout24 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout25 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout26 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout27 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout28 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout29 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout3 = 0x00000002, - regk_iop_sw_cfg_spu0_gioout30 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout31 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout4 = 0x00000004, - regk_iop_sw_cfg_spu0_gioout5 = 0x00000004, - regk_iop_sw_cfg_spu0_gioout6 = 0x00000006, - regk_iop_sw_cfg_spu0_gioout7 = 0x00000006, - regk_iop_sw_cfg_spu0_gioout8 = 0x0000000e, - regk_iop_sw_cfg_spu0_gioout9 = 0x0000000e, - regk_iop_sw_cfg_spu1 = 0x00000003, - regk_iop_sw_cfg_spu1_bus_out0_hi = 0x00000006, - regk_iop_sw_cfg_spu1_bus_out0_lo = 0x00000006, - regk_iop_sw_cfg_spu1_bus_out1_hi = 0x00000007, - regk_iop_sw_cfg_spu1_bus_out1_lo = 0x00000007, - regk_iop_sw_cfg_spu1_g0 = 0x0000000f, - regk_iop_sw_cfg_spu1_g1 = 0x0000000f, - regk_iop_sw_cfg_spu1_g2 = 0x0000000f, - regk_iop_sw_cfg_spu1_g3 = 0x0000000f, - regk_iop_sw_cfg_spu1_g4 = 0x0000000f, - regk_iop_sw_cfg_spu1_g5 = 0x0000000f, - regk_iop_sw_cfg_spu1_g6 = 0x0000000f, - regk_iop_sw_cfg_spu1_g7 = 0x0000000f, - regk_iop_sw_cfg_spu1_gio0 = 0x00000002, - regk_iop_sw_cfg_spu1_gio1 = 0x00000003, - regk_iop_sw_cfg_spu1_gio2 = 0x00000002, - regk_iop_sw_cfg_spu1_gio5 = 0x00000005, - regk_iop_sw_cfg_spu1_gio6 = 0x00000006, - regk_iop_sw_cfg_spu1_gio7 = 0x00000007, - regk_iop_sw_cfg_spu1_gio_out0 = 0x00000008, - regk_iop_sw_cfg_spu1_gio_out1 = 0x00000009, - regk_iop_sw_cfg_spu1_gio_out2 = 0x0000000a, - regk_iop_sw_cfg_spu1_gio_out3 = 0x0000000b, - regk_iop_sw_cfg_spu1_gio_out4 = 0x0000000c, - regk_iop_sw_cfg_spu1_gio_out5 = 0x0000000d, - regk_iop_sw_cfg_spu1_gio_out6 = 0x0000000e, - regk_iop_sw_cfg_spu1_gio_out7 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout0 = 0x00000001, - regk_iop_sw_cfg_spu1_gioout1 = 0x00000001, - regk_iop_sw_cfg_spu1_gioout10 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout11 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout12 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout13 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout14 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout15 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout16 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout17 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout18 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout19 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout2 = 0x00000003, - regk_iop_sw_cfg_spu1_gioout20 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout21 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout22 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout23 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout24 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout25 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout26 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout27 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout28 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout29 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout3 = 0x00000003, - regk_iop_sw_cfg_spu1_gioout30 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout31 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout4 = 0x00000005, - regk_iop_sw_cfg_spu1_gioout5 = 0x00000005, - regk_iop_sw_cfg_spu1_gioout6 = 0x00000007, - regk_iop_sw_cfg_spu1_gioout7 = 0x00000007, - regk_iop_sw_cfg_spu1_gioout8 = 0x0000000f, - regk_iop_sw_cfg_spu1_gioout9 = 0x0000000f, - regk_iop_sw_cfg_strb_timer_grp0_tmr0 = 0x00000001, - regk_iop_sw_cfg_strb_timer_grp0_tmr1 = 0x00000002, - regk_iop_sw_cfg_strb_timer_grp1_tmr0 = 0x00000001, - regk_iop_sw_cfg_strb_timer_grp1_tmr1 = 0x00000002, - regk_iop_sw_cfg_strb_timer_grp2_tmr0 = 0x00000003, - regk_iop_sw_cfg_strb_timer_grp2_tmr1 = 0x00000002, - regk_iop_sw_cfg_strb_timer_grp3_tmr0 = 0x00000003, - regk_iop_sw_cfg_strb_timer_grp3_tmr1 = 0x00000002, - regk_iop_sw_cfg_timer_grp0 = 0x00000000, - regk_iop_sw_cfg_timer_grp0_rot = 0x00000001, - regk_iop_sw_cfg_timer_grp0_strb0 = 0x0000000a, - regk_iop_sw_cfg_timer_grp0_strb1 = 0x0000000a, - regk_iop_sw_cfg_timer_grp0_strb2 = 0x0000000a, - regk_iop_sw_cfg_timer_grp0_strb3 = 0x0000000a, - regk_iop_sw_cfg_timer_grp0_tmr0 = 0x00000004, - regk_iop_sw_cfg_timer_grp0_tmr1 = 0x00000004, - regk_iop_sw_cfg_timer_grp1 = 0x00000000, - regk_iop_sw_cfg_timer_grp1_rot = 0x00000001, - regk_iop_sw_cfg_timer_grp1_strb0 = 0x0000000b, - regk_iop_sw_cfg_timer_grp1_strb1 = 0x0000000b, - regk_iop_sw_cfg_timer_grp1_strb2 = 0x0000000b, - regk_iop_sw_cfg_timer_grp1_strb3 = 0x0000000b, - regk_iop_sw_cfg_timer_grp1_tmr0 = 0x00000005, - regk_iop_sw_cfg_timer_grp1_tmr1 = 0x00000005, - regk_iop_sw_cfg_timer_grp2 = 0x00000000, - regk_iop_sw_cfg_timer_grp2_rot = 0x00000001, - regk_iop_sw_cfg_timer_grp2_strb0 = 0x0000000c, - regk_iop_sw_cfg_timer_grp2_strb1 = 0x0000000c, - regk_iop_sw_cfg_timer_grp2_strb2 = 0x0000000c, - regk_iop_sw_cfg_timer_grp2_strb3 = 0x0000000c, - regk_iop_sw_cfg_timer_grp2_tmr0 = 0x00000006, - regk_iop_sw_cfg_timer_grp2_tmr1 = 0x00000006, - regk_iop_sw_cfg_timer_grp3 = 0x00000000, - regk_iop_sw_cfg_timer_grp3_rot = 0x00000001, - regk_iop_sw_cfg_timer_grp3_strb0 = 0x0000000d, - regk_iop_sw_cfg_timer_grp3_strb1 = 0x0000000d, - regk_iop_sw_cfg_timer_grp3_strb2 = 0x0000000d, - regk_iop_sw_cfg_timer_grp3_strb3 = 0x0000000d, - regk_iop_sw_cfg_timer_grp3_tmr0 = 0x00000007, - regk_iop_sw_cfg_timer_grp3_tmr1 = 0x00000007, - regk_iop_sw_cfg_trig0_0 = 0x00000000, - regk_iop_sw_cfg_trig0_1 = 0x00000000, - regk_iop_sw_cfg_trig0_2 = 0x00000000, - regk_iop_sw_cfg_trig0_3 = 0x00000000, - regk_iop_sw_cfg_trig1_0 = 0x00000000, - regk_iop_sw_cfg_trig1_1 = 0x00000000, - regk_iop_sw_cfg_trig1_2 = 0x00000000, - regk_iop_sw_cfg_trig1_3 = 0x00000000, - regk_iop_sw_cfg_trig2_0 = 0x00000000, - regk_iop_sw_cfg_trig2_1 = 0x00000000, - regk_iop_sw_cfg_trig2_2 = 0x00000000, - regk_iop_sw_cfg_trig2_3 = 0x00000000, - regk_iop_sw_cfg_trig3_0 = 0x00000000, - regk_iop_sw_cfg_trig3_1 = 0x00000000, - regk_iop_sw_cfg_trig3_2 = 0x00000000, - regk_iop_sw_cfg_trig3_3 = 0x00000000, - regk_iop_sw_cfg_trig4_0 = 0x00000001, - regk_iop_sw_cfg_trig4_1 = 0x00000001, - regk_iop_sw_cfg_trig4_2 = 0x00000001, - regk_iop_sw_cfg_trig4_3 = 0x00000001, - regk_iop_sw_cfg_trig5_0 = 0x00000001, - regk_iop_sw_cfg_trig5_1 = 0x00000001, - regk_iop_sw_cfg_trig5_2 = 0x00000001, - regk_iop_sw_cfg_trig5_3 = 0x00000001, - regk_iop_sw_cfg_trig6_0 = 0x00000001, - regk_iop_sw_cfg_trig6_1 = 0x00000001, - regk_iop_sw_cfg_trig6_2 = 0x00000001, - regk_iop_sw_cfg_trig6_3 = 0x00000001, - regk_iop_sw_cfg_trig7_0 = 0x00000001, - regk_iop_sw_cfg_trig7_1 = 0x00000001, - regk_iop_sw_cfg_trig7_2 = 0x00000001, - regk_iop_sw_cfg_trig7_3 = 0x00000001 -}; -#endif /* __iop_sw_cfg_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h deleted file mode 100644 index 5fed844b19e2..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h +++ /dev/null @@ -1,853 +0,0 @@ -#ifndef __iop_sw_cpu_defs_h -#define __iop_sw_cpu_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_cpu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r - * id: $Id: iop_sw_cpu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sw_cpu */ - -/* Register rw_mc_ctrl, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int keep_owner : 1; - unsigned int cmd : 2; - unsigned int size : 3; - unsigned int wr_spu0_mem : 1; - unsigned int wr_spu1_mem : 1; - unsigned int dummy1 : 24; -} reg_iop_sw_cpu_rw_mc_ctrl; -#define REG_RD_ADDR_iop_sw_cpu_rw_mc_ctrl 0 -#define REG_WR_ADDR_iop_sw_cpu_rw_mc_ctrl 0 - -/* Register rw_mc_data, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cpu_rw_mc_data; -#define REG_RD_ADDR_iop_sw_cpu_rw_mc_data 4 -#define REG_WR_ADDR_iop_sw_cpu_rw_mc_data 4 - -/* Register rw_mc_addr, scope iop_sw_cpu, type rw */ -typedef unsigned int reg_iop_sw_cpu_rw_mc_addr; -#define REG_RD_ADDR_iop_sw_cpu_rw_mc_addr 8 -#define REG_WR_ADDR_iop_sw_cpu_rw_mc_addr 8 - -/* Register rs_mc_data, scope iop_sw_cpu, type rs */ -typedef unsigned int reg_iop_sw_cpu_rs_mc_data; -#define REG_RD_ADDR_iop_sw_cpu_rs_mc_data 12 - -/* Register r_mc_data, scope iop_sw_cpu, type r */ -typedef unsigned int reg_iop_sw_cpu_r_mc_data; -#define REG_RD_ADDR_iop_sw_cpu_r_mc_data 16 - -/* Register r_mc_stat, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int busy_cpu : 1; - unsigned int busy_mpu : 1; - unsigned int busy_spu0 : 1; - unsigned int busy_spu1 : 1; - unsigned int owned_by_cpu : 1; - unsigned int owned_by_mpu : 1; - unsigned int owned_by_spu0 : 1; - unsigned int owned_by_spu1 : 1; - unsigned int dummy1 : 24; -} reg_iop_sw_cpu_r_mc_stat; -#define REG_RD_ADDR_iop_sw_cpu_r_mc_stat 20 - -/* Register rw_bus0_clr_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_cpu_rw_bus0_clr_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus0_clr_mask 24 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus0_clr_mask 24 - -/* Register rw_bus0_set_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_cpu_rw_bus0_set_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus0_set_mask 28 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus0_set_mask 28 - -/* Register rw_bus0_oe_clr_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_cpu_rw_bus0_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus0_oe_clr_mask 32 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus0_oe_clr_mask 32 - -/* Register rw_bus0_oe_set_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_cpu_rw_bus0_oe_set_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus0_oe_set_mask 36 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus0_oe_set_mask 36 - -/* Register r_bus0_in, scope iop_sw_cpu, type r */ -typedef unsigned int reg_iop_sw_cpu_r_bus0_in; -#define REG_RD_ADDR_iop_sw_cpu_r_bus0_in 40 - -/* Register rw_bus1_clr_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_cpu_rw_bus1_clr_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus1_clr_mask 44 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus1_clr_mask 44 - -/* Register rw_bus1_set_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_cpu_rw_bus1_set_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus1_set_mask 48 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus1_set_mask 48 - -/* Register rw_bus1_oe_clr_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_cpu_rw_bus1_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus1_oe_clr_mask 52 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus1_oe_clr_mask 52 - -/* Register rw_bus1_oe_set_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_cpu_rw_bus1_oe_set_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus1_oe_set_mask 56 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus1_oe_set_mask 56 - -/* Register r_bus1_in, scope iop_sw_cpu, type r */ -typedef unsigned int reg_iop_sw_cpu_r_bus1_in; -#define REG_RD_ADDR_iop_sw_cpu_r_bus1_in 60 - -/* Register rw_gio_clr_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cpu_rw_gio_clr_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_gio_clr_mask 64 -#define REG_WR_ADDR_iop_sw_cpu_rw_gio_clr_mask 64 - -/* Register rw_gio_set_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cpu_rw_gio_set_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_gio_set_mask 68 -#define REG_WR_ADDR_iop_sw_cpu_rw_gio_set_mask 68 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cpu_rw_gio_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_gio_oe_clr_mask 72 -#define REG_WR_ADDR_iop_sw_cpu_rw_gio_oe_clr_mask 72 - -/* Register rw_gio_oe_set_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cpu_rw_gio_oe_set_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_gio_oe_set_mask 76 -#define REG_WR_ADDR_iop_sw_cpu_rw_gio_oe_set_mask 76 - -/* Register r_gio_in, scope iop_sw_cpu, type r */ -typedef unsigned int reg_iop_sw_cpu_r_gio_in; -#define REG_RD_ADDR_iop_sw_cpu_r_gio_in 80 - -/* Register rw_intr0_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int mpu_8 : 1; - unsigned int mpu_9 : 1; - unsigned int mpu_10 : 1; - unsigned int mpu_11 : 1; - unsigned int mpu_12 : 1; - unsigned int mpu_13 : 1; - unsigned int mpu_14 : 1; - unsigned int mpu_15 : 1; - unsigned int spu0_0 : 1; - unsigned int spu0_1 : 1; - unsigned int spu0_2 : 1; - unsigned int spu0_3 : 1; - unsigned int spu0_4 : 1; - unsigned int spu0_5 : 1; - unsigned int spu0_6 : 1; - unsigned int spu0_7 : 1; - unsigned int spu1_8 : 1; - unsigned int spu1_9 : 1; - unsigned int spu1_10 : 1; - unsigned int spu1_11 : 1; - unsigned int spu1_12 : 1; - unsigned int spu1_13 : 1; - unsigned int spu1_14 : 1; - unsigned int spu1_15 : 1; -} reg_iop_sw_cpu_rw_intr0_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_intr0_mask 84 -#define REG_WR_ADDR_iop_sw_cpu_rw_intr0_mask 84 - -/* Register rw_ack_intr0, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int mpu_8 : 1; - unsigned int mpu_9 : 1; - unsigned int mpu_10 : 1; - unsigned int mpu_11 : 1; - unsigned int mpu_12 : 1; - unsigned int mpu_13 : 1; - unsigned int mpu_14 : 1; - unsigned int mpu_15 : 1; - unsigned int spu0_0 : 1; - unsigned int spu0_1 : 1; - unsigned int spu0_2 : 1; - unsigned int spu0_3 : 1; - unsigned int spu0_4 : 1; - unsigned int spu0_5 : 1; - unsigned int spu0_6 : 1; - unsigned int spu0_7 : 1; - unsigned int spu1_8 : 1; - unsigned int spu1_9 : 1; - unsigned int spu1_10 : 1; - unsigned int spu1_11 : 1; - unsigned int spu1_12 : 1; - unsigned int spu1_13 : 1; - unsigned int spu1_14 : 1; - unsigned int spu1_15 : 1; -} reg_iop_sw_cpu_rw_ack_intr0; -#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr0 88 -#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr0 88 - -/* Register r_intr0, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int mpu_8 : 1; - unsigned int mpu_9 : 1; - unsigned int mpu_10 : 1; - unsigned int mpu_11 : 1; - unsigned int mpu_12 : 1; - unsigned int mpu_13 : 1; - unsigned int mpu_14 : 1; - unsigned int mpu_15 : 1; - unsigned int spu0_0 : 1; - unsigned int spu0_1 : 1; - unsigned int spu0_2 : 1; - unsigned int spu0_3 : 1; - unsigned int spu0_4 : 1; - unsigned int spu0_5 : 1; - unsigned int spu0_6 : 1; - unsigned int spu0_7 : 1; - unsigned int spu1_8 : 1; - unsigned int spu1_9 : 1; - unsigned int spu1_10 : 1; - unsigned int spu1_11 : 1; - unsigned int spu1_12 : 1; - unsigned int spu1_13 : 1; - unsigned int spu1_14 : 1; - unsigned int spu1_15 : 1; -} reg_iop_sw_cpu_r_intr0; -#define REG_RD_ADDR_iop_sw_cpu_r_intr0 92 - -/* Register r_masked_intr0, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int mpu_8 : 1; - unsigned int mpu_9 : 1; - unsigned int mpu_10 : 1; - unsigned int mpu_11 : 1; - unsigned int mpu_12 : 1; - unsigned int mpu_13 : 1; - unsigned int mpu_14 : 1; - unsigned int mpu_15 : 1; - unsigned int spu0_0 : 1; - unsigned int spu0_1 : 1; - unsigned int spu0_2 : 1; - unsigned int spu0_3 : 1; - unsigned int spu0_4 : 1; - unsigned int spu0_5 : 1; - unsigned int spu0_6 : 1; - unsigned int spu0_7 : 1; - unsigned int spu1_8 : 1; - unsigned int spu1_9 : 1; - unsigned int spu1_10 : 1; - unsigned int spu1_11 : 1; - unsigned int spu1_12 : 1; - unsigned int spu1_13 : 1; - unsigned int spu1_14 : 1; - unsigned int spu1_15 : 1; -} reg_iop_sw_cpu_r_masked_intr0; -#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr0 96 - -/* Register rw_intr1_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int mpu_24 : 1; - unsigned int mpu_25 : 1; - unsigned int mpu_26 : 1; - unsigned int mpu_27 : 1; - unsigned int mpu_28 : 1; - unsigned int mpu_29 : 1; - unsigned int mpu_30 : 1; - unsigned int mpu_31 : 1; - unsigned int spu0_8 : 1; - unsigned int spu0_9 : 1; - unsigned int spu0_10 : 1; - unsigned int spu0_11 : 1; - unsigned int spu0_12 : 1; - unsigned int spu0_13 : 1; - unsigned int spu0_14 : 1; - unsigned int spu0_15 : 1; - unsigned int spu1_0 : 1; - unsigned int spu1_1 : 1; - unsigned int spu1_2 : 1; - unsigned int spu1_3 : 1; - unsigned int spu1_4 : 1; - unsigned int spu1_5 : 1; - unsigned int spu1_6 : 1; - unsigned int spu1_7 : 1; -} reg_iop_sw_cpu_rw_intr1_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_intr1_mask 100 -#define REG_WR_ADDR_iop_sw_cpu_rw_intr1_mask 100 - -/* Register rw_ack_intr1, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int mpu_24 : 1; - unsigned int mpu_25 : 1; - unsigned int mpu_26 : 1; - unsigned int mpu_27 : 1; - unsigned int mpu_28 : 1; - unsigned int mpu_29 : 1; - unsigned int mpu_30 : 1; - unsigned int mpu_31 : 1; - unsigned int spu0_8 : 1; - unsigned int spu0_9 : 1; - unsigned int spu0_10 : 1; - unsigned int spu0_11 : 1; - unsigned int spu0_12 : 1; - unsigned int spu0_13 : 1; - unsigned int spu0_14 : 1; - unsigned int spu0_15 : 1; - unsigned int spu1_0 : 1; - unsigned int spu1_1 : 1; - unsigned int spu1_2 : 1; - unsigned int spu1_3 : 1; - unsigned int spu1_4 : 1; - unsigned int spu1_5 : 1; - unsigned int spu1_6 : 1; - unsigned int spu1_7 : 1; -} reg_iop_sw_cpu_rw_ack_intr1; -#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr1 104 -#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr1 104 - -/* Register r_intr1, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int mpu_24 : 1; - unsigned int mpu_25 : 1; - unsigned int mpu_26 : 1; - unsigned int mpu_27 : 1; - unsigned int mpu_28 : 1; - unsigned int mpu_29 : 1; - unsigned int mpu_30 : 1; - unsigned int mpu_31 : 1; - unsigned int spu0_8 : 1; - unsigned int spu0_9 : 1; - unsigned int spu0_10 : 1; - unsigned int spu0_11 : 1; - unsigned int spu0_12 : 1; - unsigned int spu0_13 : 1; - unsigned int spu0_14 : 1; - unsigned int spu0_15 : 1; - unsigned int spu1_0 : 1; - unsigned int spu1_1 : 1; - unsigned int spu1_2 : 1; - unsigned int spu1_3 : 1; - unsigned int spu1_4 : 1; - unsigned int spu1_5 : 1; - unsigned int spu1_6 : 1; - unsigned int spu1_7 : 1; -} reg_iop_sw_cpu_r_intr1; -#define REG_RD_ADDR_iop_sw_cpu_r_intr1 108 - -/* Register r_masked_intr1, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int mpu_24 : 1; - unsigned int mpu_25 : 1; - unsigned int mpu_26 : 1; - unsigned int mpu_27 : 1; - unsigned int mpu_28 : 1; - unsigned int mpu_29 : 1; - unsigned int mpu_30 : 1; - unsigned int mpu_31 : 1; - unsigned int spu0_8 : 1; - unsigned int spu0_9 : 1; - unsigned int spu0_10 : 1; - unsigned int spu0_11 : 1; - unsigned int spu0_12 : 1; - unsigned int spu0_13 : 1; - unsigned int spu0_14 : 1; - unsigned int spu0_15 : 1; - unsigned int spu1_0 : 1; - unsigned int spu1_1 : 1; - unsigned int spu1_2 : 1; - unsigned int spu1_3 : 1; - unsigned int spu1_4 : 1; - unsigned int spu1_5 : 1; - unsigned int spu1_6 : 1; - unsigned int spu1_7 : 1; -} reg_iop_sw_cpu_r_masked_intr1; -#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr1 112 - -/* Register rw_intr2_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int spu0_0 : 1; - unsigned int spu0_1 : 1; - unsigned int spu0_2 : 1; - unsigned int spu0_3 : 1; - unsigned int spu0_4 : 1; - unsigned int spu0_5 : 1; - unsigned int spu0_6 : 1; - unsigned int spu0_7 : 1; - unsigned int dmc_in0 : 1; - unsigned int dmc_out0 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int fifo_out0_extra : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int timer_grp1 : 1; -} reg_iop_sw_cpu_rw_intr2_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_intr2_mask 116 -#define REG_WR_ADDR_iop_sw_cpu_rw_intr2_mask 116 - -/* Register rw_ack_intr2, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int spu0_0 : 1; - unsigned int spu0_1 : 1; - unsigned int spu0_2 : 1; - unsigned int spu0_3 : 1; - unsigned int spu0_4 : 1; - unsigned int spu0_5 : 1; - unsigned int spu0_6 : 1; - unsigned int spu0_7 : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cpu_rw_ack_intr2; -#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr2 120 -#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr2 120 - -/* Register r_intr2, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int spu0_0 : 1; - unsigned int spu0_1 : 1; - unsigned int spu0_2 : 1; - unsigned int spu0_3 : 1; - unsigned int spu0_4 : 1; - unsigned int spu0_5 : 1; - unsigned int spu0_6 : 1; - unsigned int spu0_7 : 1; - unsigned int dmc_in0 : 1; - unsigned int dmc_out0 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int fifo_out0_extra : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int timer_grp1 : 1; -} reg_iop_sw_cpu_r_intr2; -#define REG_RD_ADDR_iop_sw_cpu_r_intr2 124 - -/* Register r_masked_intr2, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int spu0_0 : 1; - unsigned int spu0_1 : 1; - unsigned int spu0_2 : 1; - unsigned int spu0_3 : 1; - unsigned int spu0_4 : 1; - unsigned int spu0_5 : 1; - unsigned int spu0_6 : 1; - unsigned int spu0_7 : 1; - unsigned int dmc_in0 : 1; - unsigned int dmc_out0 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int fifo_out0_extra : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int timer_grp1 : 1; -} reg_iop_sw_cpu_r_masked_intr2; -#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr2 128 - -/* Register rw_intr3_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int spu1_0 : 1; - unsigned int spu1_1 : 1; - unsigned int spu1_2 : 1; - unsigned int spu1_3 : 1; - unsigned int spu1_4 : 1; - unsigned int spu1_5 : 1; - unsigned int spu1_6 : 1; - unsigned int spu1_7 : 1; - unsigned int dmc_in1 : 1; - unsigned int dmc_out1 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int fifo_out1_extra : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp2 : 1; - unsigned int timer_grp3 : 1; -} reg_iop_sw_cpu_rw_intr3_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_intr3_mask 132 -#define REG_WR_ADDR_iop_sw_cpu_rw_intr3_mask 132 - -/* Register rw_ack_intr3, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int spu1_0 : 1; - unsigned int spu1_1 : 1; - unsigned int spu1_2 : 1; - unsigned int spu1_3 : 1; - unsigned int spu1_4 : 1; - unsigned int spu1_5 : 1; - unsigned int spu1_6 : 1; - unsigned int spu1_7 : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cpu_rw_ack_intr3; -#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr3 136 -#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr3 136 - -/* Register r_intr3, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int spu1_0 : 1; - unsigned int spu1_1 : 1; - unsigned int spu1_2 : 1; - unsigned int spu1_3 : 1; - unsigned int spu1_4 : 1; - unsigned int spu1_5 : 1; - unsigned int spu1_6 : 1; - unsigned int spu1_7 : 1; - unsigned int dmc_in1 : 1; - unsigned int dmc_out1 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int fifo_out1_extra : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp2 : 1; - unsigned int timer_grp3 : 1; -} reg_iop_sw_cpu_r_intr3; -#define REG_RD_ADDR_iop_sw_cpu_r_intr3 140 - -/* Register r_masked_intr3, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int spu1_0 : 1; - unsigned int spu1_1 : 1; - unsigned int spu1_2 : 1; - unsigned int spu1_3 : 1; - unsigned int spu1_4 : 1; - unsigned int spu1_5 : 1; - unsigned int spu1_6 : 1; - unsigned int spu1_7 : 1; - unsigned int dmc_in1 : 1; - unsigned int dmc_out1 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int fifo_out1_extra : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp2 : 1; - unsigned int timer_grp3 : 1; -} reg_iop_sw_cpu_r_masked_intr3; -#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr3 144 - - -/* Constants */ -enum { - regk_iop_sw_cpu_copy = 0x00000000, - regk_iop_sw_cpu_no = 0x00000000, - regk_iop_sw_cpu_rd = 0x00000002, - regk_iop_sw_cpu_reg_copy = 0x00000001, - regk_iop_sw_cpu_rw_bus0_clr_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_bus0_oe_clr_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_bus0_oe_set_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_bus0_set_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_bus1_clr_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_bus1_oe_clr_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_bus1_oe_set_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_bus1_set_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_gio_clr_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_gio_oe_clr_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_gio_oe_set_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_gio_set_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_intr0_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_intr1_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_intr2_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_intr3_mask_default = 0x00000000, - regk_iop_sw_cpu_wr = 0x00000003, - regk_iop_sw_cpu_yes = 0x00000001 -}; -#endif /* __iop_sw_cpu_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h deleted file mode 100644 index da718f2a8cad..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h +++ /dev/null @@ -1,893 +0,0 @@ -#ifndef __iop_sw_mpu_defs_h -#define __iop_sw_mpu_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_mpu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r - * id: $Id: iop_sw_mpu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sw_mpu */ - -/* Register rw_sw_cfg_owner, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_mpu_rw_sw_cfg_owner; -#define REG_RD_ADDR_iop_sw_mpu_rw_sw_cfg_owner 0 -#define REG_WR_ADDR_iop_sw_mpu_rw_sw_cfg_owner 0 - -/* Register rw_mc_ctrl, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int keep_owner : 1; - unsigned int cmd : 2; - unsigned int size : 3; - unsigned int wr_spu0_mem : 1; - unsigned int wr_spu1_mem : 1; - unsigned int dummy1 : 24; -} reg_iop_sw_mpu_rw_mc_ctrl; -#define REG_RD_ADDR_iop_sw_mpu_rw_mc_ctrl 4 -#define REG_WR_ADDR_iop_sw_mpu_rw_mc_ctrl 4 - -/* Register rw_mc_data, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_mpu_rw_mc_data; -#define REG_RD_ADDR_iop_sw_mpu_rw_mc_data 8 -#define REG_WR_ADDR_iop_sw_mpu_rw_mc_data 8 - -/* Register rw_mc_addr, scope iop_sw_mpu, type rw */ -typedef unsigned int reg_iop_sw_mpu_rw_mc_addr; -#define REG_RD_ADDR_iop_sw_mpu_rw_mc_addr 12 -#define REG_WR_ADDR_iop_sw_mpu_rw_mc_addr 12 - -/* Register rs_mc_data, scope iop_sw_mpu, type rs */ -typedef unsigned int reg_iop_sw_mpu_rs_mc_data; -#define REG_RD_ADDR_iop_sw_mpu_rs_mc_data 16 - -/* Register r_mc_data, scope iop_sw_mpu, type r */ -typedef unsigned int reg_iop_sw_mpu_r_mc_data; -#define REG_RD_ADDR_iop_sw_mpu_r_mc_data 20 - -/* Register r_mc_stat, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int busy_cpu : 1; - unsigned int busy_mpu : 1; - unsigned int busy_spu0 : 1; - unsigned int busy_spu1 : 1; - unsigned int owned_by_cpu : 1; - unsigned int owned_by_mpu : 1; - unsigned int owned_by_spu0 : 1; - unsigned int owned_by_spu1 : 1; - unsigned int dummy1 : 24; -} reg_iop_sw_mpu_r_mc_stat; -#define REG_RD_ADDR_iop_sw_mpu_r_mc_stat 24 - -/* Register rw_bus0_clr_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_mpu_rw_bus0_clr_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus0_clr_mask 28 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus0_clr_mask 28 - -/* Register rw_bus0_set_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_mpu_rw_bus0_set_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus0_set_mask 32 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus0_set_mask 32 - -/* Register rw_bus0_oe_clr_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_mpu_rw_bus0_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus0_oe_clr_mask 36 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus0_oe_clr_mask 36 - -/* Register rw_bus0_oe_set_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_mpu_rw_bus0_oe_set_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus0_oe_set_mask 40 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus0_oe_set_mask 40 - -/* Register r_bus0_in, scope iop_sw_mpu, type r */ -typedef unsigned int reg_iop_sw_mpu_r_bus0_in; -#define REG_RD_ADDR_iop_sw_mpu_r_bus0_in 44 - -/* Register rw_bus1_clr_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_mpu_rw_bus1_clr_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus1_clr_mask 48 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus1_clr_mask 48 - -/* Register rw_bus1_set_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_mpu_rw_bus1_set_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus1_set_mask 52 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus1_set_mask 52 - -/* Register rw_bus1_oe_clr_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_mpu_rw_bus1_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus1_oe_clr_mask 56 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus1_oe_clr_mask 56 - -/* Register rw_bus1_oe_set_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_mpu_rw_bus1_oe_set_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus1_oe_set_mask 60 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus1_oe_set_mask 60 - -/* Register r_bus1_in, scope iop_sw_mpu, type r */ -typedef unsigned int reg_iop_sw_mpu_r_bus1_in; -#define REG_RD_ADDR_iop_sw_mpu_r_bus1_in 64 - -/* Register rw_gio_clr_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_mpu_rw_gio_clr_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_gio_clr_mask 68 -#define REG_WR_ADDR_iop_sw_mpu_rw_gio_clr_mask 68 - -/* Register rw_gio_set_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_mpu_rw_gio_set_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_gio_set_mask 72 -#define REG_WR_ADDR_iop_sw_mpu_rw_gio_set_mask 72 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_mpu_rw_gio_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_gio_oe_clr_mask 76 -#define REG_WR_ADDR_iop_sw_mpu_rw_gio_oe_clr_mask 76 - -/* Register rw_gio_oe_set_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_mpu_rw_gio_oe_set_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_gio_oe_set_mask 80 -#define REG_WR_ADDR_iop_sw_mpu_rw_gio_oe_set_mask 80 - -/* Register r_gio_in, scope iop_sw_mpu, type r */ -typedef unsigned int reg_iop_sw_mpu_r_gio_in; -#define REG_RD_ADDR_iop_sw_mpu_r_gio_in 84 - -/* Register rw_cpu_intr, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int intr16 : 1; - unsigned int intr17 : 1; - unsigned int intr18 : 1; - unsigned int intr19 : 1; - unsigned int intr20 : 1; - unsigned int intr21 : 1; - unsigned int intr22 : 1; - unsigned int intr23 : 1; - unsigned int intr24 : 1; - unsigned int intr25 : 1; - unsigned int intr26 : 1; - unsigned int intr27 : 1; - unsigned int intr28 : 1; - unsigned int intr29 : 1; - unsigned int intr30 : 1; - unsigned int intr31 : 1; -} reg_iop_sw_mpu_rw_cpu_intr; -#define REG_RD_ADDR_iop_sw_mpu_rw_cpu_intr 88 -#define REG_WR_ADDR_iop_sw_mpu_rw_cpu_intr 88 - -/* Register r_cpu_intr, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int intr16 : 1; - unsigned int intr17 : 1; - unsigned int intr18 : 1; - unsigned int intr19 : 1; - unsigned int intr20 : 1; - unsigned int intr21 : 1; - unsigned int intr22 : 1; - unsigned int intr23 : 1; - unsigned int intr24 : 1; - unsigned int intr25 : 1; - unsigned int intr26 : 1; - unsigned int intr27 : 1; - unsigned int intr28 : 1; - unsigned int intr29 : 1; - unsigned int intr30 : 1; - unsigned int intr31 : 1; -} reg_iop_sw_mpu_r_cpu_intr; -#define REG_RD_ADDR_iop_sw_mpu_r_cpu_intr 92 - -/* Register rw_intr_grp0_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu0_intr0 : 1; - unsigned int spu1_intr0 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr1 : 1; - unsigned int spu1_intr1 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr2 : 1; - unsigned int spu1_intr2 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr3 : 1; - unsigned int spu1_intr3 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_rw_intr_grp0_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp0_mask 96 -#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp0_mask 96 - -/* Register rw_ack_intr_grp0, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu0_intr0 : 1; - unsigned int spu1_intr0 : 1; - unsigned int dummy1 : 6; - unsigned int spu0_intr1 : 1; - unsigned int spu1_intr1 : 1; - unsigned int dummy2 : 6; - unsigned int spu0_intr2 : 1; - unsigned int spu1_intr2 : 1; - unsigned int dummy3 : 6; - unsigned int spu0_intr3 : 1; - unsigned int spu1_intr3 : 1; - unsigned int dummy4 : 6; -} reg_iop_sw_mpu_rw_ack_intr_grp0; -#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp0 100 -#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp0 100 - -/* Register r_intr_grp0, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu0_intr0 : 1; - unsigned int spu1_intr0 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr1 : 1; - unsigned int spu1_intr1 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr2 : 1; - unsigned int spu1_intr2 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr3 : 1; - unsigned int spu1_intr3 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_r_intr_grp0; -#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp0 104 - -/* Register r_masked_intr_grp0, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu0_intr0 : 1; - unsigned int spu1_intr0 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr1 : 1; - unsigned int spu1_intr1 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr2 : 1; - unsigned int spu1_intr2 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr3 : 1; - unsigned int spu1_intr3 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_r_masked_intr_grp0; -#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp0 108 - -/* Register rw_intr_grp1_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu0_intr4 : 1; - unsigned int spu1_intr4 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr5 : 1; - unsigned int spu1_intr5 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr6 : 1; - unsigned int spu1_intr6 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr7 : 1; - unsigned int spu1_intr7 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_rw_intr_grp1_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp1_mask 112 -#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp1_mask 112 - -/* Register rw_ack_intr_grp1, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu0_intr4 : 1; - unsigned int spu1_intr4 : 1; - unsigned int dummy1 : 6; - unsigned int spu0_intr5 : 1; - unsigned int spu1_intr5 : 1; - unsigned int dummy2 : 6; - unsigned int spu0_intr6 : 1; - unsigned int spu1_intr6 : 1; - unsigned int dummy3 : 6; - unsigned int spu0_intr7 : 1; - unsigned int spu1_intr7 : 1; - unsigned int dummy4 : 6; -} reg_iop_sw_mpu_rw_ack_intr_grp1; -#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp1 116 -#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp1 116 - -/* Register r_intr_grp1, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu0_intr4 : 1; - unsigned int spu1_intr4 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr5 : 1; - unsigned int spu1_intr5 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr6 : 1; - unsigned int spu1_intr6 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr7 : 1; - unsigned int spu1_intr7 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_r_intr_grp1; -#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp1 120 - -/* Register r_masked_intr_grp1, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu0_intr4 : 1; - unsigned int spu1_intr4 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr5 : 1; - unsigned int spu1_intr5 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr6 : 1; - unsigned int spu1_intr6 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr7 : 1; - unsigned int spu1_intr7 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_r_masked_intr_grp1; -#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp1 124 - -/* Register rw_intr_grp2_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu0_intr8 : 1; - unsigned int spu1_intr8 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr9 : 1; - unsigned int spu1_intr9 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr10 : 1; - unsigned int spu1_intr10 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr11 : 1; - unsigned int spu1_intr11 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_rw_intr_grp2_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp2_mask 128 -#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp2_mask 128 - -/* Register rw_ack_intr_grp2, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu0_intr8 : 1; - unsigned int spu1_intr8 : 1; - unsigned int dummy1 : 6; - unsigned int spu0_intr9 : 1; - unsigned int spu1_intr9 : 1; - unsigned int dummy2 : 6; - unsigned int spu0_intr10 : 1; - unsigned int spu1_intr10 : 1; - unsigned int dummy3 : 6; - unsigned int spu0_intr11 : 1; - unsigned int spu1_intr11 : 1; - unsigned int dummy4 : 6; -} reg_iop_sw_mpu_rw_ack_intr_grp2; -#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp2 132 -#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp2 132 - -/* Register r_intr_grp2, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu0_intr8 : 1; - unsigned int spu1_intr8 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr9 : 1; - unsigned int spu1_intr9 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr10 : 1; - unsigned int spu1_intr10 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr11 : 1; - unsigned int spu1_intr11 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_r_intr_grp2; -#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp2 136 - -/* Register r_masked_intr_grp2, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu0_intr8 : 1; - unsigned int spu1_intr8 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr9 : 1; - unsigned int spu1_intr9 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr10 : 1; - unsigned int spu1_intr10 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr11 : 1; - unsigned int spu1_intr11 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_r_masked_intr_grp2; -#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp2 140 - -/* Register rw_intr_grp3_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu0_intr12 : 1; - unsigned int spu1_intr12 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr13 : 1; - unsigned int spu1_intr13 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr14 : 1; - unsigned int spu1_intr14 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr15 : 1; - unsigned int spu1_intr15 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_rw_intr_grp3_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp3_mask 144 -#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp3_mask 144 - -/* Register rw_ack_intr_grp3, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu0_intr12 : 1; - unsigned int spu1_intr12 : 1; - unsigned int dummy1 : 6; - unsigned int spu0_intr13 : 1; - unsigned int spu1_intr13 : 1; - unsigned int dummy2 : 6; - unsigned int spu0_intr14 : 1; - unsigned int spu1_intr14 : 1; - unsigned int dummy3 : 6; - unsigned int spu0_intr15 : 1; - unsigned int spu1_intr15 : 1; - unsigned int dummy4 : 6; -} reg_iop_sw_mpu_rw_ack_intr_grp3; -#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp3 148 -#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp3 148 - -/* Register r_intr_grp3, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu0_intr12 : 1; - unsigned int spu1_intr12 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr13 : 1; - unsigned int spu1_intr13 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr14 : 1; - unsigned int spu1_intr14 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr15 : 1; - unsigned int spu1_intr15 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_r_intr_grp3; -#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp3 152 - -/* Register r_masked_intr_grp3, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu0_intr12 : 1; - unsigned int spu1_intr12 : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int spu0_intr13 : 1; - unsigned int spu1_intr13 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp4 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int dmc_in0 : 1; - unsigned int spu0_intr14 : 1; - unsigned int spu1_intr14 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp5 : 1; - unsigned int timer_grp2 : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int dmc_out1 : 1; - unsigned int spu0_intr15 : 1; - unsigned int spu1_intr15 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int dmc_in1 : 1; -} reg_iop_sw_mpu_r_masked_intr_grp3; -#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp3 156 - - -/* Constants */ -enum { - regk_iop_sw_mpu_copy = 0x00000000, - regk_iop_sw_mpu_cpu = 0x00000000, - regk_iop_sw_mpu_mpu = 0x00000001, - regk_iop_sw_mpu_no = 0x00000000, - regk_iop_sw_mpu_nop = 0x00000000, - regk_iop_sw_mpu_rd = 0x00000002, - regk_iop_sw_mpu_reg_copy = 0x00000001, - regk_iop_sw_mpu_rw_bus0_clr_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_bus0_oe_clr_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_bus0_oe_set_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_bus0_set_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_bus1_clr_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_bus1_oe_clr_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_bus1_oe_set_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_bus1_set_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_gio_clr_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_gio_oe_clr_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_gio_oe_set_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_gio_set_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_intr_grp0_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_intr_grp1_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_intr_grp2_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_intr_grp3_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_sw_cfg_owner_default = 0x00000000, - regk_iop_sw_mpu_set = 0x00000001, - regk_iop_sw_mpu_spu0 = 0x00000002, - regk_iop_sw_mpu_spu1 = 0x00000003, - regk_iop_sw_mpu_wr = 0x00000003, - regk_iop_sw_mpu_yes = 0x00000001 -}; -#endif /* __iop_sw_mpu_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h deleted file mode 100644 index b59dde4bd0d1..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h +++ /dev/null @@ -1,552 +0,0 @@ -#ifndef __iop_sw_spu_defs_h -#define __iop_sw_spu_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_sw_spu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_spu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_spu.r - * id: $Id: iop_sw_spu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sw_spu */ - -/* Register rw_mc_ctrl, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int keep_owner : 1; - unsigned int cmd : 2; - unsigned int size : 3; - unsigned int wr_spu0_mem : 1; - unsigned int wr_spu1_mem : 1; - unsigned int dummy1 : 24; -} reg_iop_sw_spu_rw_mc_ctrl; -#define REG_RD_ADDR_iop_sw_spu_rw_mc_ctrl 0 -#define REG_WR_ADDR_iop_sw_spu_rw_mc_ctrl 0 - -/* Register rw_mc_data, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_spu_rw_mc_data; -#define REG_RD_ADDR_iop_sw_spu_rw_mc_data 4 -#define REG_WR_ADDR_iop_sw_spu_rw_mc_data 4 - -/* Register rw_mc_addr, scope iop_sw_spu, type rw */ -typedef unsigned int reg_iop_sw_spu_rw_mc_addr; -#define REG_RD_ADDR_iop_sw_spu_rw_mc_addr 8 -#define REG_WR_ADDR_iop_sw_spu_rw_mc_addr 8 - -/* Register rs_mc_data, scope iop_sw_spu, type rs */ -typedef unsigned int reg_iop_sw_spu_rs_mc_data; -#define REG_RD_ADDR_iop_sw_spu_rs_mc_data 12 - -/* Register r_mc_data, scope iop_sw_spu, type r */ -typedef unsigned int reg_iop_sw_spu_r_mc_data; -#define REG_RD_ADDR_iop_sw_spu_r_mc_data 16 - -/* Register r_mc_stat, scope iop_sw_spu, type r */ -typedef struct { - unsigned int busy_cpu : 1; - unsigned int busy_mpu : 1; - unsigned int busy_spu0 : 1; - unsigned int busy_spu1 : 1; - unsigned int owned_by_cpu : 1; - unsigned int owned_by_mpu : 1; - unsigned int owned_by_spu0 : 1; - unsigned int owned_by_spu1 : 1; - unsigned int dummy1 : 24; -} reg_iop_sw_spu_r_mc_stat; -#define REG_RD_ADDR_iop_sw_spu_r_mc_stat 20 - -/* Register rw_bus0_clr_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_spu_rw_bus0_clr_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus0_clr_mask 24 -#define REG_WR_ADDR_iop_sw_spu_rw_bus0_clr_mask 24 - -/* Register rw_bus0_set_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_spu_rw_bus0_set_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus0_set_mask 28 -#define REG_WR_ADDR_iop_sw_spu_rw_bus0_set_mask 28 - -/* Register rw_bus0_oe_clr_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_spu_rw_bus0_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus0_oe_clr_mask 32 -#define REG_WR_ADDR_iop_sw_spu_rw_bus0_oe_clr_mask 32 - -/* Register rw_bus0_oe_set_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_spu_rw_bus0_oe_set_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus0_oe_set_mask 36 -#define REG_WR_ADDR_iop_sw_spu_rw_bus0_oe_set_mask 36 - -/* Register r_bus0_in, scope iop_sw_spu, type r */ -typedef unsigned int reg_iop_sw_spu_r_bus0_in; -#define REG_RD_ADDR_iop_sw_spu_r_bus0_in 40 - -/* Register rw_bus1_clr_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_spu_rw_bus1_clr_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus1_clr_mask 44 -#define REG_WR_ADDR_iop_sw_spu_rw_bus1_clr_mask 44 - -/* Register rw_bus1_set_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_spu_rw_bus1_set_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus1_set_mask 48 -#define REG_WR_ADDR_iop_sw_spu_rw_bus1_set_mask 48 - -/* Register rw_bus1_oe_clr_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_spu_rw_bus1_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus1_oe_clr_mask 52 -#define REG_WR_ADDR_iop_sw_spu_rw_bus1_oe_clr_mask 52 - -/* Register rw_bus1_oe_set_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_spu_rw_bus1_oe_set_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus1_oe_set_mask 56 -#define REG_WR_ADDR_iop_sw_spu_rw_bus1_oe_set_mask 56 - -/* Register r_bus1_in, scope iop_sw_spu, type r */ -typedef unsigned int reg_iop_sw_spu_r_bus1_in; -#define REG_RD_ADDR_iop_sw_spu_r_bus1_in 60 - -/* Register rw_gio_clr_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_spu_rw_gio_clr_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask 64 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask 64 - -/* Register rw_gio_set_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_spu_rw_gio_set_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask 68 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask 68 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_spu_rw_gio_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask 72 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask 72 - -/* Register rw_gio_oe_set_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_spu_rw_gio_oe_set_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask 76 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask 76 - -/* Register r_gio_in, scope iop_sw_spu, type r */ -typedef unsigned int reg_iop_sw_spu_r_gio_in; -#define REG_RD_ADDR_iop_sw_spu_r_gio_in 80 - -/* Register rw_bus0_clr_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus0_clr_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_bus0_clr_mask_lo 84 -#define REG_WR_ADDR_iop_sw_spu_rw_bus0_clr_mask_lo 84 - -/* Register rw_bus0_clr_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte2 : 8; - unsigned int byte3 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus0_clr_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_bus0_clr_mask_hi 88 -#define REG_WR_ADDR_iop_sw_spu_rw_bus0_clr_mask_hi 88 - -/* Register rw_bus0_set_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus0_set_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_bus0_set_mask_lo 92 -#define REG_WR_ADDR_iop_sw_spu_rw_bus0_set_mask_lo 92 - -/* Register rw_bus0_set_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte2 : 8; - unsigned int byte3 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus0_set_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_bus0_set_mask_hi 96 -#define REG_WR_ADDR_iop_sw_spu_rw_bus0_set_mask_hi 96 - -/* Register rw_bus1_clr_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus1_clr_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_bus1_clr_mask_lo 100 -#define REG_WR_ADDR_iop_sw_spu_rw_bus1_clr_mask_lo 100 - -/* Register rw_bus1_clr_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte2 : 8; - unsigned int byte3 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus1_clr_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_bus1_clr_mask_hi 104 -#define REG_WR_ADDR_iop_sw_spu_rw_bus1_clr_mask_hi 104 - -/* Register rw_bus1_set_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus1_set_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_bus1_set_mask_lo 108 -#define REG_WR_ADDR_iop_sw_spu_rw_bus1_set_mask_lo 108 - -/* Register rw_bus1_set_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte2 : 8; - unsigned int byte3 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus1_set_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_bus1_set_mask_hi 112 -#define REG_WR_ADDR_iop_sw_spu_rw_bus1_set_mask_hi 112 - -/* Register rw_gio_clr_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_clr_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask_lo 116 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask_lo 116 - -/* Register rw_gio_clr_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_clr_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask_hi 120 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask_hi 120 - -/* Register rw_gio_set_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_set_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask_lo 124 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask_lo 124 - -/* Register rw_gio_set_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_set_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask_hi 128 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask_hi 128 - -/* Register rw_gio_oe_clr_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_oe_clr_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_lo 132 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_lo 132 - -/* Register rw_gio_oe_clr_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_oe_clr_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_hi 136 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_hi 136 - -/* Register rw_gio_oe_set_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_oe_set_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask_lo 140 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask_lo 140 - -/* Register rw_gio_oe_set_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_oe_set_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask_hi 144 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask_hi 144 - -/* Register rw_cpu_intr, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_cpu_intr; -#define REG_RD_ADDR_iop_sw_spu_rw_cpu_intr 148 -#define REG_WR_ADDR_iop_sw_spu_rw_cpu_intr 148 - -/* Register r_cpu_intr, scope iop_sw_spu, type r */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_r_cpu_intr; -#define REG_RD_ADDR_iop_sw_spu_r_cpu_intr 152 - -/* Register r_hw_intr, scope iop_sw_spu, type r */ -typedef struct { - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int timer_grp1 : 1; - unsigned int timer_grp2 : 1; - unsigned int timer_grp3 : 1; - unsigned int fifo_out0 : 1; - unsigned int fifo_out0_extra : 1; - unsigned int fifo_in0 : 1; - unsigned int fifo_in0_extra : 1; - unsigned int fifo_out1 : 1; - unsigned int fifo_out1_extra : 1; - unsigned int fifo_in1 : 1; - unsigned int fifo_in1_extra : 1; - unsigned int dmc_out0 : 1; - unsigned int dmc_in0 : 1; - unsigned int dmc_out1 : 1; - unsigned int dmc_in1 : 1; - unsigned int dummy1 : 8; -} reg_iop_sw_spu_r_hw_intr; -#define REG_RD_ADDR_iop_sw_spu_r_hw_intr 156 - -/* Register rw_mpu_intr, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_mpu_intr; -#define REG_RD_ADDR_iop_sw_spu_rw_mpu_intr 160 -#define REG_WR_ADDR_iop_sw_spu_rw_mpu_intr 160 - -/* Register r_mpu_intr, scope iop_sw_spu, type r */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int other_spu_intr0 : 1; - unsigned int other_spu_intr1 : 1; - unsigned int other_spu_intr2 : 1; - unsigned int other_spu_intr3 : 1; - unsigned int other_spu_intr4 : 1; - unsigned int other_spu_intr5 : 1; - unsigned int other_spu_intr6 : 1; - unsigned int other_spu_intr7 : 1; - unsigned int other_spu_intr8 : 1; - unsigned int other_spu_intr9 : 1; - unsigned int other_spu_intr10 : 1; - unsigned int other_spu_intr11 : 1; - unsigned int other_spu_intr12 : 1; - unsigned int other_spu_intr13 : 1; - unsigned int other_spu_intr14 : 1; - unsigned int other_spu_intr15 : 1; -} reg_iop_sw_spu_r_mpu_intr; -#define REG_RD_ADDR_iop_sw_spu_r_mpu_intr 164 - - -/* Constants */ -enum { - regk_iop_sw_spu_copy = 0x00000000, - regk_iop_sw_spu_no = 0x00000000, - regk_iop_sw_spu_nop = 0x00000000, - regk_iop_sw_spu_rd = 0x00000002, - regk_iop_sw_spu_reg_copy = 0x00000001, - regk_iop_sw_spu_rw_bus0_clr_mask_default = 0x00000000, - regk_iop_sw_spu_rw_bus0_oe_clr_mask_default = 0x00000000, - regk_iop_sw_spu_rw_bus0_oe_set_mask_default = 0x00000000, - regk_iop_sw_spu_rw_bus0_set_mask_default = 0x00000000, - regk_iop_sw_spu_rw_bus1_clr_mask_default = 0x00000000, - regk_iop_sw_spu_rw_bus1_oe_clr_mask_default = 0x00000000, - regk_iop_sw_spu_rw_bus1_oe_set_mask_default = 0x00000000, - regk_iop_sw_spu_rw_bus1_set_mask_default = 0x00000000, - regk_iop_sw_spu_rw_gio_clr_mask_default = 0x00000000, - regk_iop_sw_spu_rw_gio_oe_clr_mask_default = 0x00000000, - regk_iop_sw_spu_rw_gio_oe_set_mask_default = 0x00000000, - regk_iop_sw_spu_rw_gio_set_mask_default = 0x00000000, - regk_iop_sw_spu_set = 0x00000001, - regk_iop_sw_spu_wr = 0x00000003, - regk_iop_sw_spu_yes = 0x00000001 -}; -#endif /* __iop_sw_spu_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h deleted file mode 100644 index c994114f3b51..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h +++ /dev/null @@ -1,249 +0,0 @@ -#ifndef __iop_timer_grp_defs_h -#define __iop_timer_grp_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_timer_grp.r - * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_timer_grp_defs.h ../../inst/io_proc/rtl/iop_timer_grp.r - * id: $Id: iop_timer_grp_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_timer_grp */ - -/* Register rw_cfg, scope iop_timer_grp, type rw */ -typedef struct { - unsigned int clk_src : 1; - unsigned int trig : 2; - unsigned int clk_gen_div : 8; - unsigned int clk_div : 8; - unsigned int dummy1 : 13; -} reg_iop_timer_grp_rw_cfg; -#define REG_RD_ADDR_iop_timer_grp_rw_cfg 0 -#define REG_WR_ADDR_iop_timer_grp_rw_cfg 0 - -/* Register rw_half_period, scope iop_timer_grp, type rw */ -typedef struct { - unsigned int quota_lo : 15; - unsigned int quota_hi : 15; - unsigned int quota_hi_sel : 1; - unsigned int dummy1 : 1; -} reg_iop_timer_grp_rw_half_period; -#define REG_RD_ADDR_iop_timer_grp_rw_half_period 4 -#define REG_WR_ADDR_iop_timer_grp_rw_half_period 4 - -/* Register rw_half_period_len, scope iop_timer_grp, type rw */ -typedef unsigned int reg_iop_timer_grp_rw_half_period_len; -#define REG_RD_ADDR_iop_timer_grp_rw_half_period_len 8 -#define REG_WR_ADDR_iop_timer_grp_rw_half_period_len 8 - -#define STRIDE_iop_timer_grp_rw_tmr_cfg 4 -/* Register rw_tmr_cfg, scope iop_timer_grp, type rw */ -typedef struct { - unsigned int clk_src : 3; - unsigned int strb : 2; - unsigned int run_mode : 2; - unsigned int out_mode : 1; - unsigned int active_on_tmr : 2; - unsigned int inv : 1; - unsigned int en_by_tmr : 2; - unsigned int dis_by_tmr : 2; - unsigned int en_only_by_reg : 1; - unsigned int dis_only_by_reg : 1; - unsigned int rst_at_en_strb : 1; - unsigned int dummy1 : 14; -} reg_iop_timer_grp_rw_tmr_cfg; -#define REG_RD_ADDR_iop_timer_grp_rw_tmr_cfg 12 -#define REG_WR_ADDR_iop_timer_grp_rw_tmr_cfg 12 - -#define STRIDE_iop_timer_grp_rw_tmr_len 4 -/* Register rw_tmr_len, scope iop_timer_grp, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_timer_grp_rw_tmr_len; -#define REG_RD_ADDR_iop_timer_grp_rw_tmr_len 44 -#define REG_WR_ADDR_iop_timer_grp_rw_tmr_len 44 - -/* Register rw_cmd, scope iop_timer_grp, type rw */ -typedef struct { - unsigned int rst : 4; - unsigned int en : 4; - unsigned int dis : 4; - unsigned int strb : 4; - unsigned int dummy1 : 16; -} reg_iop_timer_grp_rw_cmd; -#define REG_RD_ADDR_iop_timer_grp_rw_cmd 60 -#define REG_WR_ADDR_iop_timer_grp_rw_cmd 60 - -/* Register r_clk_gen_cnt, scope iop_timer_grp, type r */ -typedef unsigned int reg_iop_timer_grp_r_clk_gen_cnt; -#define REG_RD_ADDR_iop_timer_grp_r_clk_gen_cnt 64 - -#define STRIDE_iop_timer_grp_rs_tmr_cnt 8 -/* Register rs_tmr_cnt, scope iop_timer_grp, type rs */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_timer_grp_rs_tmr_cnt; -#define REG_RD_ADDR_iop_timer_grp_rs_tmr_cnt 68 - -#define STRIDE_iop_timer_grp_r_tmr_cnt 8 -/* Register r_tmr_cnt, scope iop_timer_grp, type r */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_timer_grp_r_tmr_cnt; -#define REG_RD_ADDR_iop_timer_grp_r_tmr_cnt 72 - -/* Register rw_intr_mask, scope iop_timer_grp, type rw */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int tmr2 : 1; - unsigned int tmr3 : 1; - unsigned int dummy1 : 28; -} reg_iop_timer_grp_rw_intr_mask; -#define REG_RD_ADDR_iop_timer_grp_rw_intr_mask 100 -#define REG_WR_ADDR_iop_timer_grp_rw_intr_mask 100 - -/* Register rw_ack_intr, scope iop_timer_grp, type rw */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int tmr2 : 1; - unsigned int tmr3 : 1; - unsigned int dummy1 : 28; -} reg_iop_timer_grp_rw_ack_intr; -#define REG_RD_ADDR_iop_timer_grp_rw_ack_intr 104 -#define REG_WR_ADDR_iop_timer_grp_rw_ack_intr 104 - -/* Register r_intr, scope iop_timer_grp, type r */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int tmr2 : 1; - unsigned int tmr3 : 1; - unsigned int dummy1 : 28; -} reg_iop_timer_grp_r_intr; -#define REG_RD_ADDR_iop_timer_grp_r_intr 108 - -/* Register r_masked_intr, scope iop_timer_grp, type r */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int tmr2 : 1; - unsigned int tmr3 : 1; - unsigned int dummy1 : 28; -} reg_iop_timer_grp_r_masked_intr; -#define REG_RD_ADDR_iop_timer_grp_r_masked_intr 112 - - -/* Constants */ -enum { - regk_iop_timer_grp_clk200 = 0x00000000, - regk_iop_timer_grp_clk_gen = 0x00000002, - regk_iop_timer_grp_complete = 0x00000002, - regk_iop_timer_grp_div_clk200 = 0x00000001, - regk_iop_timer_grp_div_clk_gen = 0x00000003, - regk_iop_timer_grp_ext = 0x00000001, - regk_iop_timer_grp_hi = 0x00000000, - regk_iop_timer_grp_long_period = 0x00000001, - regk_iop_timer_grp_neg = 0x00000002, - regk_iop_timer_grp_no = 0x00000000, - regk_iop_timer_grp_once = 0x00000003, - regk_iop_timer_grp_pause = 0x00000001, - regk_iop_timer_grp_pos = 0x00000001, - regk_iop_timer_grp_pos_neg = 0x00000003, - regk_iop_timer_grp_pulse = 0x00000000, - regk_iop_timer_grp_r_tmr_cnt_size = 0x00000004, - regk_iop_timer_grp_rs_tmr_cnt_size = 0x00000004, - regk_iop_timer_grp_rw_cfg_default = 0x00000002, - regk_iop_timer_grp_rw_intr_mask_default = 0x00000000, - regk_iop_timer_grp_rw_tmr_cfg_default0 = 0x00018000, - regk_iop_timer_grp_rw_tmr_cfg_default1 = 0x0001a900, - regk_iop_timer_grp_rw_tmr_cfg_default2 = 0x0001d200, - regk_iop_timer_grp_rw_tmr_cfg_default3 = 0x0001fb00, - regk_iop_timer_grp_rw_tmr_cfg_size = 0x00000004, - regk_iop_timer_grp_rw_tmr_len_default = 0x00000000, - regk_iop_timer_grp_rw_tmr_len_size = 0x00000004, - regk_iop_timer_grp_short_period = 0x00000000, - regk_iop_timer_grp_stop = 0x00000000, - regk_iop_timer_grp_tmr = 0x00000004, - regk_iop_timer_grp_toggle = 0x00000001, - regk_iop_timer_grp_yes = 0x00000001 -}; -#endif /* __iop_timer_grp_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h deleted file mode 100644 index 36e44282399d..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h +++ /dev/null @@ -1,170 +0,0 @@ -#ifndef __iop_trigger_grp_defs_h -#define __iop_trigger_grp_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_trigger_grp.r - * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_trigger_grp_defs.h ../../inst/io_proc/rtl/iop_trigger_grp.r - * id: $Id: iop_trigger_grp_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_trigger_grp */ - -#define STRIDE_iop_trigger_grp_rw_cfg 4 -/* Register rw_cfg, scope iop_trigger_grp, type rw */ -typedef struct { - unsigned int action : 2; - unsigned int once : 1; - unsigned int trig : 3; - unsigned int en_only_by_reg : 1; - unsigned int dis_only_by_reg : 1; - unsigned int dummy1 : 24; -} reg_iop_trigger_grp_rw_cfg; -#define REG_RD_ADDR_iop_trigger_grp_rw_cfg 0 -#define REG_WR_ADDR_iop_trigger_grp_rw_cfg 0 - -/* Register rw_cmd, scope iop_trigger_grp, type rw */ -typedef struct { - unsigned int dis : 4; - unsigned int en : 4; - unsigned int dummy1 : 24; -} reg_iop_trigger_grp_rw_cmd; -#define REG_RD_ADDR_iop_trigger_grp_rw_cmd 16 -#define REG_WR_ADDR_iop_trigger_grp_rw_cmd 16 - -/* Register rw_intr_mask, scope iop_trigger_grp, type rw */ -typedef struct { - unsigned int trig0 : 1; - unsigned int trig1 : 1; - unsigned int trig2 : 1; - unsigned int trig3 : 1; - unsigned int dummy1 : 28; -} reg_iop_trigger_grp_rw_intr_mask; -#define REG_RD_ADDR_iop_trigger_grp_rw_intr_mask 20 -#define REG_WR_ADDR_iop_trigger_grp_rw_intr_mask 20 - -/* Register rw_ack_intr, scope iop_trigger_grp, type rw */ -typedef struct { - unsigned int trig0 : 1; - unsigned int trig1 : 1; - unsigned int trig2 : 1; - unsigned int trig3 : 1; - unsigned int dummy1 : 28; -} reg_iop_trigger_grp_rw_ack_intr; -#define REG_RD_ADDR_iop_trigger_grp_rw_ack_intr 24 -#define REG_WR_ADDR_iop_trigger_grp_rw_ack_intr 24 - -/* Register r_intr, scope iop_trigger_grp, type r */ -typedef struct { - unsigned int trig0 : 1; - unsigned int trig1 : 1; - unsigned int trig2 : 1; - unsigned int trig3 : 1; - unsigned int dummy1 : 28; -} reg_iop_trigger_grp_r_intr; -#define REG_RD_ADDR_iop_trigger_grp_r_intr 28 - -/* Register r_masked_intr, scope iop_trigger_grp, type r */ -typedef struct { - unsigned int trig0 : 1; - unsigned int trig1 : 1; - unsigned int trig2 : 1; - unsigned int trig3 : 1; - unsigned int dummy1 : 28; -} reg_iop_trigger_grp_r_masked_intr; -#define REG_RD_ADDR_iop_trigger_grp_r_masked_intr 32 - - -/* Constants */ -enum { - regk_iop_trigger_grp_fall = 0x00000002, - regk_iop_trigger_grp_fall_lo = 0x00000006, - regk_iop_trigger_grp_no = 0x00000000, - regk_iop_trigger_grp_off = 0x00000000, - regk_iop_trigger_grp_pulse = 0x00000000, - regk_iop_trigger_grp_rise = 0x00000001, - regk_iop_trigger_grp_rise_fall = 0x00000003, - regk_iop_trigger_grp_rise_fall_hi = 0x00000007, - regk_iop_trigger_grp_rise_fall_lo = 0x00000004, - regk_iop_trigger_grp_rise_hi = 0x00000005, - regk_iop_trigger_grp_rw_cfg_default = 0x000000c0, - regk_iop_trigger_grp_rw_cfg_size = 0x00000004, - regk_iop_trigger_grp_rw_intr_mask_default = 0x00000000, - regk_iop_trigger_grp_toggle = 0x00000003, - regk_iop_trigger_grp_yes = 0x00000001 -}; -#endif /* __iop_trigger_grp_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h b/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h deleted file mode 100644 index b8d6a910c71c..000000000000 --- a/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h +++ /dev/null @@ -1,99 +0,0 @@ -#ifndef __iop_version_defs_h -#define __iop_version_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_version.r - * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp - * last modfied: Mon Apr 11 16:08:44 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_version_defs.h ../../inst/io_proc/rtl/guinness/iop_version.r - * id: $Id: iop_version_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_version */ - -/* Register r_version, scope iop_version, type r */ -typedef struct { - unsigned int nr : 8; - unsigned int dummy1 : 24; -} reg_iop_version_r_version; -#define REG_RD_ADDR_iop_version_r_version 0 - - -/* Constants */ -enum { - regk_iop_version_v1_0 = 0x00000001 -}; -#endif /* __iop_version_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h b/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h deleted file mode 100644 index 7b167e3c0572..000000000000 --- a/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h +++ /dev/null @@ -1,104 +0,0 @@ -#ifndef __irq_nmi_defs_h -#define __irq_nmi_defs_h - -/* - * This file is autogenerated from - * file: ../../mod/irq_nmi.r - * id: - * last modfied: Thu Jan 22 09:22:43 2004 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile irq_nmi_defs.h ../../mod/irq_nmi.r - * id: $Id: irq_nmi_defs.h,v 1.1 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope irq_nmi */ - -/* Register rw_cmd, scope irq_nmi, type rw */ -typedef struct { - unsigned int delay : 16; - unsigned int op : 2; - unsigned int dummy1 : 14; -} reg_irq_nmi_rw_cmd; -#define REG_RD_ADDR_irq_nmi_rw_cmd 0 -#define REG_WR_ADDR_irq_nmi_rw_cmd 0 - - -/* Constants */ -enum { - regk_irq_nmi_ack_irq = 0x00000002, - regk_irq_nmi_ack_nmi = 0x00000003, - regk_irq_nmi_irq = 0x00000000, - regk_irq_nmi_nmi = 0x00000001 -}; -#endif /* __irq_nmi_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h b/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h deleted file mode 100644 index a11fdd3cd907..000000000000 --- a/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h +++ /dev/null @@ -1,205 +0,0 @@ -#ifndef __marb_bp_defs_h -#define __marb_bp_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Fri Nov 7 15:36:04 2003 - * - * by /n/asic/projects/guinness/design/top/inst/rdesc/rdes2c ../../rtl/global.rmap ../../mod/modreg.rmap -base 0xb0000000 ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_bp_defs.h,v 1.2 2004/06/04 07:15:33 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -/* C-code for register scope marb_bp */ - -/* Register rw_first_addr, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_first_addr; -#define REG_RD_ADDR_marb_bp_rw_first_addr 0 -#define REG_WR_ADDR_marb_bp_rw_first_addr 0 - -/* Register rw_last_addr, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_last_addr; -#define REG_RD_ADDR_marb_bp_rw_last_addr 4 -#define REG_WR_ADDR_marb_bp_rw_last_addr 4 - -/* Register rw_op, scope marb_bp, type rw */ -typedef struct { - unsigned int read : 1; - unsigned int write : 1; - unsigned int read_excl : 1; - unsigned int pri_write : 1; - unsigned int us_read : 1; - unsigned int us_write : 1; - unsigned int us_read_excl : 1; - unsigned int us_pri_write : 1; - unsigned int dummy1 : 24; -} reg_marb_bp_rw_op; -#define REG_RD_ADDR_marb_bp_rw_op 8 -#define REG_WR_ADDR_marb_bp_rw_op 8 - -/* Register rw_clients, scope marb_bp, type rw */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_rw_clients; -#define REG_RD_ADDR_marb_bp_rw_clients 12 -#define REG_WR_ADDR_marb_bp_rw_clients 12 - -/* Register rw_options, scope marb_bp, type rw */ -typedef struct { - unsigned int wrap : 1; - unsigned int dummy1 : 31; -} reg_marb_bp_rw_options; -#define REG_RD_ADDR_marb_bp_rw_options 16 -#define REG_WR_ADDR_marb_bp_rw_options 16 - -/* Register r_break_addr, scope marb_bp, type r */ -typedef unsigned int reg_marb_bp_r_break_addr; -#define REG_RD_ADDR_marb_bp_r_break_addr 20 - -/* Register r_break_op, scope marb_bp, type r */ -typedef struct { - unsigned int read : 1; - unsigned int write : 1; - unsigned int read_excl : 1; - unsigned int pri_write : 1; - unsigned int us_read : 1; - unsigned int us_write : 1; - unsigned int us_read_excl : 1; - unsigned int us_pri_write : 1; - unsigned int dummy1 : 24; -} reg_marb_bp_r_break_op; -#define REG_RD_ADDR_marb_bp_r_break_op 24 - -/* Register r_break_clients, scope marb_bp, type r */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_r_break_clients; -#define REG_RD_ADDR_marb_bp_r_break_clients 28 - -/* Register r_break_first_client, scope marb_bp, type r */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_r_break_first_client; -#define REG_RD_ADDR_marb_bp_r_break_first_client 32 - -/* Register r_break_size, scope marb_bp, type r */ -typedef unsigned int reg_marb_bp_r_break_size; -#define REG_RD_ADDR_marb_bp_r_break_size 36 - -/* Register rw_ack, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_ack; -#define REG_RD_ADDR_marb_bp_rw_ack 40 -#define REG_WR_ADDR_marb_bp_rw_ack 40 - - -/* Constants */ -enum { - regk_marb_bp_no = 0x00000000, - regk_marb_bp_rw_op_default = 0x00000000, - regk_marb_bp_rw_options_default = 0x00000000, - regk_marb_bp_yes = 0x00000001 -}; -#endif /* __marb_bp_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/marb_defs.h b/include/asm-cris/arch-v32/hwregs/marb_defs.h deleted file mode 100644 index 71e8af0bb3a4..000000000000 --- a/include/asm-cris/arch-v32/hwregs/marb_defs.h +++ /dev/null @@ -1,475 +0,0 @@ -#ifndef __marb_defs_h -#define __marb_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Mon Apr 11 16:12:16 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope marb */ - -#define STRIDE_marb_rw_int_slots 4 -/* Register rw_int_slots, scope marb, type rw */ -typedef struct { - unsigned int owner : 4; - unsigned int dummy1 : 28; -} reg_marb_rw_int_slots; -#define REG_RD_ADDR_marb_rw_int_slots 0 -#define REG_WR_ADDR_marb_rw_int_slots 0 - -#define STRIDE_marb_rw_ext_slots 4 -/* Register rw_ext_slots, scope marb, type rw */ -typedef struct { - unsigned int owner : 4; - unsigned int dummy1 : 28; -} reg_marb_rw_ext_slots; -#define REG_RD_ADDR_marb_rw_ext_slots 256 -#define REG_WR_ADDR_marb_rw_ext_slots 256 - -#define STRIDE_marb_rw_regs_slots 4 -/* Register rw_regs_slots, scope marb, type rw */ -typedef struct { - unsigned int owner : 4; - unsigned int dummy1 : 28; -} reg_marb_rw_regs_slots; -#define REG_RD_ADDR_marb_rw_regs_slots 512 -#define REG_WR_ADDR_marb_rw_regs_slots 512 - -/* Register rw_intr_mask, scope marb, type rw */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_rw_intr_mask; -#define REG_RD_ADDR_marb_rw_intr_mask 528 -#define REG_WR_ADDR_marb_rw_intr_mask 528 - -/* Register rw_ack_intr, scope marb, type rw */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_rw_ack_intr; -#define REG_RD_ADDR_marb_rw_ack_intr 532 -#define REG_WR_ADDR_marb_rw_ack_intr 532 - -/* Register r_intr, scope marb, type r */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_r_intr; -#define REG_RD_ADDR_marb_r_intr 536 - -/* Register r_masked_intr, scope marb, type r */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_r_masked_intr; -#define REG_RD_ADDR_marb_r_masked_intr 540 - -/* Register rw_stop_mask, scope marb, type rw */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_rw_stop_mask; -#define REG_RD_ADDR_marb_rw_stop_mask 544 -#define REG_WR_ADDR_marb_rw_stop_mask 544 - -/* Register r_stopped, scope marb, type r */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_r_stopped; -#define REG_RD_ADDR_marb_r_stopped 548 - -/* Register rw_no_snoop, scope marb, type rw */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_rw_no_snoop; -#define REG_RD_ADDR_marb_rw_no_snoop 832 -#define REG_WR_ADDR_marb_rw_no_snoop 832 - -/* Register rw_no_snoop_rq, scope marb, type rw */ -typedef struct { - unsigned int dummy1 : 10; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int dummy2 : 20; -} reg_marb_rw_no_snoop_rq; -#define REG_RD_ADDR_marb_rw_no_snoop_rq 836 -#define REG_WR_ADDR_marb_rw_no_snoop_rq 836 - - -/* Constants */ -enum { - regk_marb_cpud = 0x0000000b, - regk_marb_cpui = 0x0000000a, - regk_marb_dma0 = 0x00000000, - regk_marb_dma1 = 0x00000001, - regk_marb_dma2 = 0x00000002, - regk_marb_dma3 = 0x00000003, - regk_marb_dma4 = 0x00000004, - regk_marb_dma5 = 0x00000005, - regk_marb_dma6 = 0x00000006, - regk_marb_dma7 = 0x00000007, - regk_marb_dma8 = 0x00000008, - regk_marb_dma9 = 0x00000009, - regk_marb_iop = 0x0000000c, - regk_marb_no = 0x00000000, - regk_marb_r_stopped_default = 0x00000000, - regk_marb_rw_ext_slots_default = 0x00000000, - regk_marb_rw_ext_slots_size = 0x00000040, - regk_marb_rw_int_slots_default = 0x00000000, - regk_marb_rw_int_slots_size = 0x00000040, - regk_marb_rw_intr_mask_default = 0x00000000, - regk_marb_rw_no_snoop_default = 0x00000000, - regk_marb_rw_no_snoop_rq_default = 0x00000000, - regk_marb_rw_regs_slots_default = 0x00000000, - regk_marb_rw_regs_slots_size = 0x00000004, - regk_marb_rw_stop_mask_default = 0x00000000, - regk_marb_slave = 0x0000000d, - regk_marb_yes = 0x00000001 -}; -#endif /* __marb_defs_h */ -#ifndef __marb_bp_defs_h -#define __marb_bp_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Mon Apr 11 16:12:16 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope marb_bp */ - -/* Register rw_first_addr, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_first_addr; -#define REG_RD_ADDR_marb_bp_rw_first_addr 0 -#define REG_WR_ADDR_marb_bp_rw_first_addr 0 - -/* Register rw_last_addr, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_last_addr; -#define REG_RD_ADDR_marb_bp_rw_last_addr 4 -#define REG_WR_ADDR_marb_bp_rw_last_addr 4 - -/* Register rw_op, scope marb_bp, type rw */ -typedef struct { - unsigned int rd : 1; - unsigned int wr : 1; - unsigned int rd_excl : 1; - unsigned int pri_wr : 1; - unsigned int us_rd : 1; - unsigned int us_wr : 1; - unsigned int us_rd_excl : 1; - unsigned int us_pri_wr : 1; - unsigned int dummy1 : 24; -} reg_marb_bp_rw_op; -#define REG_RD_ADDR_marb_bp_rw_op 8 -#define REG_WR_ADDR_marb_bp_rw_op 8 - -/* Register rw_clients, scope marb_bp, type rw */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_rw_clients; -#define REG_RD_ADDR_marb_bp_rw_clients 12 -#define REG_WR_ADDR_marb_bp_rw_clients 12 - -/* Register rw_options, scope marb_bp, type rw */ -typedef struct { - unsigned int wrap : 1; - unsigned int dummy1 : 31; -} reg_marb_bp_rw_options; -#define REG_RD_ADDR_marb_bp_rw_options 16 -#define REG_WR_ADDR_marb_bp_rw_options 16 - -/* Register r_brk_addr, scope marb_bp, type r */ -typedef unsigned int reg_marb_bp_r_brk_addr; -#define REG_RD_ADDR_marb_bp_r_brk_addr 20 - -/* Register r_brk_op, scope marb_bp, type r */ -typedef struct { - unsigned int rd : 1; - unsigned int wr : 1; - unsigned int rd_excl : 1; - unsigned int pri_wr : 1; - unsigned int us_rd : 1; - unsigned int us_wr : 1; - unsigned int us_rd_excl : 1; - unsigned int us_pri_wr : 1; - unsigned int dummy1 : 24; -} reg_marb_bp_r_brk_op; -#define REG_RD_ADDR_marb_bp_r_brk_op 24 - -/* Register r_brk_clients, scope marb_bp, type r */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_r_brk_clients; -#define REG_RD_ADDR_marb_bp_r_brk_clients 28 - -/* Register r_brk_first_client, scope marb_bp, type r */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_r_brk_first_client; -#define REG_RD_ADDR_marb_bp_r_brk_first_client 32 - -/* Register r_brk_size, scope marb_bp, type r */ -typedef unsigned int reg_marb_bp_r_brk_size; -#define REG_RD_ADDR_marb_bp_r_brk_size 36 - -/* Register rw_ack, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_ack; -#define REG_RD_ADDR_marb_bp_rw_ack 40 -#define REG_WR_ADDR_marb_bp_rw_ack 40 - - -/* Constants */ -enum { - regk_marb_bp_no = 0x00000000, - regk_marb_bp_rw_op_default = 0x00000000, - regk_marb_bp_rw_options_default = 0x00000000, - regk_marb_bp_yes = 0x00000001 -}; -#endif /* __marb_bp_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/pinmux_defs.h b/include/asm-cris/arch-v32/hwregs/pinmux_defs.h deleted file mode 100644 index 9d91c2de1b07..000000000000 --- a/include/asm-cris/arch-v32/hwregs/pinmux_defs.h +++ /dev/null @@ -1,357 +0,0 @@ -#ifndef __pinmux_defs_h -#define __pinmux_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r - * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp - * last modfied: Mon Apr 11 16:09:11 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile pinmux_defs.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r - * id: $Id: pinmux_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope pinmux */ - -/* Register rw_pa, scope pinmux, type rw */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int csp2_n : 1; - unsigned int csp3_n : 1; - unsigned int csp5_n : 1; - unsigned int csp6_n : 1; - unsigned int hsh4 : 1; - unsigned int hsh5 : 1; - unsigned int hsh6 : 1; - unsigned int hsh7 : 1; - unsigned int dummy1 : 16; -} reg_pinmux_rw_pa; -#define REG_RD_ADDR_pinmux_rw_pa 0 -#define REG_WR_ADDR_pinmux_rw_pa 0 - -/* Register rw_hwprot, scope pinmux, type rw */ -typedef struct { - unsigned int ser1 : 1; - unsigned int ser2 : 1; - unsigned int ser3 : 1; - unsigned int sser0 : 1; - unsigned int sser1 : 1; - unsigned int ata0 : 1; - unsigned int ata1 : 1; - unsigned int ata2 : 1; - unsigned int ata3 : 1; - unsigned int ata : 1; - unsigned int eth1 : 1; - unsigned int eth1_mgm : 1; - unsigned int timer : 1; - unsigned int p21 : 1; - unsigned int dummy1 : 18; -} reg_pinmux_rw_hwprot; -#define REG_RD_ADDR_pinmux_rw_hwprot 4 -#define REG_WR_ADDR_pinmux_rw_hwprot 4 - -/* Register rw_pb_gio, scope pinmux, type rw */ -typedef struct { - unsigned int pb0 : 1; - unsigned int pb1 : 1; - unsigned int pb2 : 1; - unsigned int pb3 : 1; - unsigned int pb4 : 1; - unsigned int pb5 : 1; - unsigned int pb6 : 1; - unsigned int pb7 : 1; - unsigned int pb8 : 1; - unsigned int pb9 : 1; - unsigned int pb10 : 1; - unsigned int pb11 : 1; - unsigned int pb12 : 1; - unsigned int pb13 : 1; - unsigned int pb14 : 1; - unsigned int pb15 : 1; - unsigned int pb16 : 1; - unsigned int pb17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pb_gio; -#define REG_RD_ADDR_pinmux_rw_pb_gio 8 -#define REG_WR_ADDR_pinmux_rw_pb_gio 8 - -/* Register rw_pb_iop, scope pinmux, type rw */ -typedef struct { - unsigned int pb0 : 1; - unsigned int pb1 : 1; - unsigned int pb2 : 1; - unsigned int pb3 : 1; - unsigned int pb4 : 1; - unsigned int pb5 : 1; - unsigned int pb6 : 1; - unsigned int pb7 : 1; - unsigned int pb8 : 1; - unsigned int pb9 : 1; - unsigned int pb10 : 1; - unsigned int pb11 : 1; - unsigned int pb12 : 1; - unsigned int pb13 : 1; - unsigned int pb14 : 1; - unsigned int pb15 : 1; - unsigned int pb16 : 1; - unsigned int pb17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pb_iop; -#define REG_RD_ADDR_pinmux_rw_pb_iop 12 -#define REG_WR_ADDR_pinmux_rw_pb_iop 12 - -/* Register rw_pc_gio, scope pinmux, type rw */ -typedef struct { - unsigned int pc0 : 1; - unsigned int pc1 : 1; - unsigned int pc2 : 1; - unsigned int pc3 : 1; - unsigned int pc4 : 1; - unsigned int pc5 : 1; - unsigned int pc6 : 1; - unsigned int pc7 : 1; - unsigned int pc8 : 1; - unsigned int pc9 : 1; - unsigned int pc10 : 1; - unsigned int pc11 : 1; - unsigned int pc12 : 1; - unsigned int pc13 : 1; - unsigned int pc14 : 1; - unsigned int pc15 : 1; - unsigned int pc16 : 1; - unsigned int pc17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pc_gio; -#define REG_RD_ADDR_pinmux_rw_pc_gio 16 -#define REG_WR_ADDR_pinmux_rw_pc_gio 16 - -/* Register rw_pc_iop, scope pinmux, type rw */ -typedef struct { - unsigned int pc0 : 1; - unsigned int pc1 : 1; - unsigned int pc2 : 1; - unsigned int pc3 : 1; - unsigned int pc4 : 1; - unsigned int pc5 : 1; - unsigned int pc6 : 1; - unsigned int pc7 : 1; - unsigned int pc8 : 1; - unsigned int pc9 : 1; - unsigned int pc10 : 1; - unsigned int pc11 : 1; - unsigned int pc12 : 1; - unsigned int pc13 : 1; - unsigned int pc14 : 1; - unsigned int pc15 : 1; - unsigned int pc16 : 1; - unsigned int pc17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pc_iop; -#define REG_RD_ADDR_pinmux_rw_pc_iop 20 -#define REG_WR_ADDR_pinmux_rw_pc_iop 20 - -/* Register rw_pd_gio, scope pinmux, type rw */ -typedef struct { - unsigned int pd0 : 1; - unsigned int pd1 : 1; - unsigned int pd2 : 1; - unsigned int pd3 : 1; - unsigned int pd4 : 1; - unsigned int pd5 : 1; - unsigned int pd6 : 1; - unsigned int pd7 : 1; - unsigned int pd8 : 1; - unsigned int pd9 : 1; - unsigned int pd10 : 1; - unsigned int pd11 : 1; - unsigned int pd12 : 1; - unsigned int pd13 : 1; - unsigned int pd14 : 1; - unsigned int pd15 : 1; - unsigned int pd16 : 1; - unsigned int pd17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pd_gio; -#define REG_RD_ADDR_pinmux_rw_pd_gio 24 -#define REG_WR_ADDR_pinmux_rw_pd_gio 24 - -/* Register rw_pd_iop, scope pinmux, type rw */ -typedef struct { - unsigned int pd0 : 1; - unsigned int pd1 : 1; - unsigned int pd2 : 1; - unsigned int pd3 : 1; - unsigned int pd4 : 1; - unsigned int pd5 : 1; - unsigned int pd6 : 1; - unsigned int pd7 : 1; - unsigned int pd8 : 1; - unsigned int pd9 : 1; - unsigned int pd10 : 1; - unsigned int pd11 : 1; - unsigned int pd12 : 1; - unsigned int pd13 : 1; - unsigned int pd14 : 1; - unsigned int pd15 : 1; - unsigned int pd16 : 1; - unsigned int pd17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pd_iop; -#define REG_RD_ADDR_pinmux_rw_pd_iop 28 -#define REG_WR_ADDR_pinmux_rw_pd_iop 28 - -/* Register rw_pe_gio, scope pinmux, type rw */ -typedef struct { - unsigned int pe0 : 1; - unsigned int pe1 : 1; - unsigned int pe2 : 1; - unsigned int pe3 : 1; - unsigned int pe4 : 1; - unsigned int pe5 : 1; - unsigned int pe6 : 1; - unsigned int pe7 : 1; - unsigned int pe8 : 1; - unsigned int pe9 : 1; - unsigned int pe10 : 1; - unsigned int pe11 : 1; - unsigned int pe12 : 1; - unsigned int pe13 : 1; - unsigned int pe14 : 1; - unsigned int pe15 : 1; - unsigned int pe16 : 1; - unsigned int pe17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pe_gio; -#define REG_RD_ADDR_pinmux_rw_pe_gio 32 -#define REG_WR_ADDR_pinmux_rw_pe_gio 32 - -/* Register rw_pe_iop, scope pinmux, type rw */ -typedef struct { - unsigned int pe0 : 1; - unsigned int pe1 : 1; - unsigned int pe2 : 1; - unsigned int pe3 : 1; - unsigned int pe4 : 1; - unsigned int pe5 : 1; - unsigned int pe6 : 1; - unsigned int pe7 : 1; - unsigned int pe8 : 1; - unsigned int pe9 : 1; - unsigned int pe10 : 1; - unsigned int pe11 : 1; - unsigned int pe12 : 1; - unsigned int pe13 : 1; - unsigned int pe14 : 1; - unsigned int pe15 : 1; - unsigned int pe16 : 1; - unsigned int pe17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pe_iop; -#define REG_RD_ADDR_pinmux_rw_pe_iop 36 -#define REG_WR_ADDR_pinmux_rw_pe_iop 36 - -/* Register rw_usb_phy, scope pinmux, type rw */ -typedef struct { - unsigned int en_usb0 : 1; - unsigned int en_usb1 : 1; - unsigned int dummy1 : 30; -} reg_pinmux_rw_usb_phy; -#define REG_RD_ADDR_pinmux_rw_usb_phy 40 -#define REG_WR_ADDR_pinmux_rw_usb_phy 40 - - -/* Constants */ -enum { - regk_pinmux_no = 0x00000000, - regk_pinmux_rw_hwprot_default = 0x00000000, - regk_pinmux_rw_pa_default = 0x00000000, - regk_pinmux_rw_pb_gio_default = 0x00000000, - regk_pinmux_rw_pb_iop_default = 0x00000000, - regk_pinmux_rw_pc_gio_default = 0x00000000, - regk_pinmux_rw_pc_iop_default = 0x00000000, - regk_pinmux_rw_pd_gio_default = 0x00000000, - regk_pinmux_rw_pd_iop_default = 0x00000000, - regk_pinmux_rw_pe_gio_default = 0x00000000, - regk_pinmux_rw_pe_iop_default = 0x00000000, - regk_pinmux_rw_usb_phy_default = 0x00000000, - regk_pinmux_yes = 0x00000001 -}; -#endif /* __pinmux_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/reg_rdwr.h b/include/asm-cris/arch-v32/hwregs/reg_rdwr.h deleted file mode 100644 index 236f91efe7e8..000000000000 --- a/include/asm-cris/arch-v32/hwregs/reg_rdwr.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Read/write register macros used by *_defs.h - */ - -#ifndef reg_rdwr_h -#define reg_rdwr_h - -#ifndef REG_READ -#define REG_READ(type, addr) (*((volatile type *) (addr))) -#endif - -#ifndef REG_WRITE -#define REG_WRITE(type, addr, val) \ - do { *((volatile type *) (addr)) = (val); } while(0) -#endif - -#endif diff --git a/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h b/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h deleted file mode 100644 index d9f0e924fb23..000000000000 --- a/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h +++ /dev/null @@ -1,173 +0,0 @@ -#ifndef __rt_trace_defs_h -#define __rt_trace_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/rt_trace/rtl/rt_regs.r - * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp - * last modfied: Mon Apr 11 16:09:14 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile rt_trace_defs.h ../../inst/rt_trace/rtl/rt_regs.r - * id: $Id: rt_trace_defs.h,v 1.1 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope rt_trace */ - -/* Register rw_cfg, scope rt_trace, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int mode : 1; - unsigned int owner : 1; - unsigned int wp : 1; - unsigned int stall : 1; - unsigned int dummy1 : 3; - unsigned int wp_start : 7; - unsigned int dummy2 : 1; - unsigned int wp_stop : 7; - unsigned int dummy3 : 9; -} reg_rt_trace_rw_cfg; -#define REG_RD_ADDR_rt_trace_rw_cfg 0 -#define REG_WR_ADDR_rt_trace_rw_cfg 0 - -/* Register rw_tap_ctrl, scope rt_trace, type rw */ -typedef struct { - unsigned int ack_data : 1; - unsigned int ack_guru : 1; - unsigned int dummy1 : 30; -} reg_rt_trace_rw_tap_ctrl; -#define REG_RD_ADDR_rt_trace_rw_tap_ctrl 4 -#define REG_WR_ADDR_rt_trace_rw_tap_ctrl 4 - -/* Register r_tap_stat, scope rt_trace, type r */ -typedef struct { - unsigned int dav : 1; - unsigned int empty : 1; - unsigned int dummy1 : 30; -} reg_rt_trace_r_tap_stat; -#define REG_RD_ADDR_rt_trace_r_tap_stat 8 - -/* Register rw_tap_data, scope rt_trace, type rw */ -typedef unsigned int reg_rt_trace_rw_tap_data; -#define REG_RD_ADDR_rt_trace_rw_tap_data 12 -#define REG_WR_ADDR_rt_trace_rw_tap_data 12 - -/* Register rw_tap_hdata, scope rt_trace, type rw */ -typedef struct { - unsigned int op : 4; - unsigned int sub_op : 4; - unsigned int dummy1 : 24; -} reg_rt_trace_rw_tap_hdata; -#define REG_RD_ADDR_rt_trace_rw_tap_hdata 16 -#define REG_WR_ADDR_rt_trace_rw_tap_hdata 16 - -/* Register r_redir, scope rt_trace, type r */ -typedef unsigned int reg_rt_trace_r_redir; -#define REG_RD_ADDR_rt_trace_r_redir 20 - - -/* Constants */ -enum { - regk_rt_trace_brk = 0x0000000c, - regk_rt_trace_dbg = 0x00000003, - regk_rt_trace_dbgdi = 0x00000004, - regk_rt_trace_dbgdo = 0x00000005, - regk_rt_trace_gmode = 0x00000000, - regk_rt_trace_no = 0x00000000, - regk_rt_trace_nop = 0x00000000, - regk_rt_trace_normal = 0x00000000, - regk_rt_trace_rdmem = 0x00000007, - regk_rt_trace_rdmemb = 0x00000009, - regk_rt_trace_rdpreg = 0x00000002, - regk_rt_trace_rdreg = 0x00000001, - regk_rt_trace_rdsreg = 0x00000003, - regk_rt_trace_redir = 0x00000006, - regk_rt_trace_ret = 0x0000000b, - regk_rt_trace_rw_cfg_default = 0x00000000, - regk_rt_trace_trcfg = 0x00000001, - regk_rt_trace_wp = 0x00000001, - regk_rt_trace_wp0 = 0x00000001, - regk_rt_trace_wp1 = 0x00000002, - regk_rt_trace_wp2 = 0x00000004, - regk_rt_trace_wp3 = 0x00000008, - regk_rt_trace_wp4 = 0x00000010, - regk_rt_trace_wp5 = 0x00000020, - regk_rt_trace_wp6 = 0x00000040, - regk_rt_trace_wrmem = 0x00000008, - regk_rt_trace_wrmemb = 0x0000000a, - regk_rt_trace_wrpreg = 0x00000005, - regk_rt_trace_wrreg = 0x00000004, - regk_rt_trace_wrsreg = 0x00000006, - regk_rt_trace_yes = 0x00000001 -}; -#endif /* __rt_trace_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/ser_defs.h b/include/asm-cris/arch-v32/hwregs/ser_defs.h deleted file mode 100644 index 01c2fab97d43..000000000000 --- a/include/asm-cris/arch-v32/hwregs/ser_defs.h +++ /dev/null @@ -1,308 +0,0 @@ -#ifndef __ser_defs_h -#define __ser_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/ser/rtl/ser_regs.r - * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp - * last modfied: Mon Apr 11 16:09:21 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile ser_defs.h ../../inst/ser/rtl/ser_regs.r - * id: $Id: ser_defs.h,v 1.10 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope ser */ - -/* Register rw_tr_ctrl, scope ser, type rw */ -typedef struct { - unsigned int base_freq : 3; - unsigned int en : 1; - unsigned int par : 2; - unsigned int par_en : 1; - unsigned int data_bits : 1; - unsigned int stop_bits : 1; - unsigned int stop : 1; - unsigned int rts_delay : 3; - unsigned int rts_setup : 1; - unsigned int auto_rts : 1; - unsigned int txd : 1; - unsigned int auto_cts : 1; - unsigned int dummy1 : 15; -} reg_ser_rw_tr_ctrl; -#define REG_RD_ADDR_ser_rw_tr_ctrl 0 -#define REG_WR_ADDR_ser_rw_tr_ctrl 0 - -/* Register rw_tr_dma_en, scope ser, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int dummy1 : 31; -} reg_ser_rw_tr_dma_en; -#define REG_RD_ADDR_ser_rw_tr_dma_en 4 -#define REG_WR_ADDR_ser_rw_tr_dma_en 4 - -/* Register rw_rec_ctrl, scope ser, type rw */ -typedef struct { - unsigned int base_freq : 3; - unsigned int en : 1; - unsigned int par : 2; - unsigned int par_en : 1; - unsigned int data_bits : 1; - unsigned int dma_mode : 1; - unsigned int dma_err : 1; - unsigned int sampling : 1; - unsigned int timeout : 3; - unsigned int auto_eop : 1; - unsigned int half_duplex : 1; - unsigned int rts_n : 1; - unsigned int loopback : 1; - unsigned int dummy1 : 14; -} reg_ser_rw_rec_ctrl; -#define REG_RD_ADDR_ser_rw_rec_ctrl 8 -#define REG_WR_ADDR_ser_rw_rec_ctrl 8 - -/* Register rw_tr_baud_div, scope ser, type rw */ -typedef struct { - unsigned int div : 16; - unsigned int dummy1 : 16; -} reg_ser_rw_tr_baud_div; -#define REG_RD_ADDR_ser_rw_tr_baud_div 12 -#define REG_WR_ADDR_ser_rw_tr_baud_div 12 - -/* Register rw_rec_baud_div, scope ser, type rw */ -typedef struct { - unsigned int div : 16; - unsigned int dummy1 : 16; -} reg_ser_rw_rec_baud_div; -#define REG_RD_ADDR_ser_rw_rec_baud_div 16 -#define REG_WR_ADDR_ser_rw_rec_baud_div 16 - -/* Register rw_xoff, scope ser, type rw */ -typedef struct { - unsigned int chr : 8; - unsigned int automatic : 1; - unsigned int dummy1 : 23; -} reg_ser_rw_xoff; -#define REG_RD_ADDR_ser_rw_xoff 20 -#define REG_WR_ADDR_ser_rw_xoff 20 - -/* Register rw_xoff_clr, scope ser, type rw */ -typedef struct { - unsigned int clr : 1; - unsigned int dummy1 : 31; -} reg_ser_rw_xoff_clr; -#define REG_RD_ADDR_ser_rw_xoff_clr 24 -#define REG_WR_ADDR_ser_rw_xoff_clr 24 - -/* Register rw_dout, scope ser, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_ser_rw_dout; -#define REG_RD_ADDR_ser_rw_dout 28 -#define REG_WR_ADDR_ser_rw_dout 28 - -/* Register rs_stat_din, scope ser, type rs */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 8; - unsigned int dav : 1; - unsigned int framing_err : 1; - unsigned int par_err : 1; - unsigned int orun : 1; - unsigned int rec_err : 1; - unsigned int rxd : 1; - unsigned int tr_idle : 1; - unsigned int tr_empty : 1; - unsigned int tr_rdy : 1; - unsigned int cts_n : 1; - unsigned int xoff_detect : 1; - unsigned int rts_n : 1; - unsigned int txd : 1; - unsigned int dummy2 : 3; -} reg_ser_rs_stat_din; -#define REG_RD_ADDR_ser_rs_stat_din 32 - -/* Register r_stat_din, scope ser, type r */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 8; - unsigned int dav : 1; - unsigned int framing_err : 1; - unsigned int par_err : 1; - unsigned int orun : 1; - unsigned int rec_err : 1; - unsigned int rxd : 1; - unsigned int tr_idle : 1; - unsigned int tr_empty : 1; - unsigned int tr_rdy : 1; - unsigned int cts_n : 1; - unsigned int xoff_detect : 1; - unsigned int rts_n : 1; - unsigned int txd : 1; - unsigned int dummy2 : 3; -} reg_ser_r_stat_din; -#define REG_RD_ADDR_ser_r_stat_din 36 - -/* Register rw_rec_eop, scope ser, type rw */ -typedef struct { - unsigned int set : 1; - unsigned int dummy1 : 31; -} reg_ser_rw_rec_eop; -#define REG_RD_ADDR_ser_rw_rec_eop 40 -#define REG_WR_ADDR_ser_rw_rec_eop 40 - -/* Register rw_intr_mask, scope ser, type rw */ -typedef struct { - unsigned int tr_rdy : 1; - unsigned int tr_empty : 1; - unsigned int tr_idle : 1; - unsigned int dav : 1; - unsigned int dummy1 : 28; -} reg_ser_rw_intr_mask; -#define REG_RD_ADDR_ser_rw_intr_mask 44 -#define REG_WR_ADDR_ser_rw_intr_mask 44 - -/* Register rw_ack_intr, scope ser, type rw */ -typedef struct { - unsigned int tr_rdy : 1; - unsigned int tr_empty : 1; - unsigned int tr_idle : 1; - unsigned int dav : 1; - unsigned int dummy1 : 28; -} reg_ser_rw_ack_intr; -#define REG_RD_ADDR_ser_rw_ack_intr 48 -#define REG_WR_ADDR_ser_rw_ack_intr 48 - -/* Register r_intr, scope ser, type r */ -typedef struct { - unsigned int tr_rdy : 1; - unsigned int tr_empty : 1; - unsigned int tr_idle : 1; - unsigned int dav : 1; - unsigned int dummy1 : 28; -} reg_ser_r_intr; -#define REG_RD_ADDR_ser_r_intr 52 - -/* Register r_masked_intr, scope ser, type r */ -typedef struct { - unsigned int tr_rdy : 1; - unsigned int tr_empty : 1; - unsigned int tr_idle : 1; - unsigned int dav : 1; - unsigned int dummy1 : 28; -} reg_ser_r_masked_intr; -#define REG_RD_ADDR_ser_r_masked_intr 56 - - -/* Constants */ -enum { - regk_ser_active = 0x00000000, - regk_ser_bits1 = 0x00000000, - regk_ser_bits2 = 0x00000001, - regk_ser_bits7 = 0x00000001, - regk_ser_bits8 = 0x00000000, - regk_ser_del0_5 = 0x00000000, - regk_ser_del1 = 0x00000001, - regk_ser_del1_5 = 0x00000002, - regk_ser_del2 = 0x00000003, - regk_ser_del2_5 = 0x00000004, - regk_ser_del3 = 0x00000005, - regk_ser_del3_5 = 0x00000006, - regk_ser_del4 = 0x00000007, - regk_ser_even = 0x00000000, - regk_ser_ext = 0x00000001, - regk_ser_f100 = 0x00000007, - regk_ser_f29_493 = 0x00000004, - regk_ser_f32 = 0x00000005, - regk_ser_f32_768 = 0x00000006, - regk_ser_ignore = 0x00000001, - regk_ser_inactive = 0x00000001, - regk_ser_majority = 0x00000001, - regk_ser_mark = 0x00000002, - regk_ser_middle = 0x00000000, - regk_ser_no = 0x00000000, - regk_ser_odd = 0x00000001, - regk_ser_off = 0x00000000, - regk_ser_rw_intr_mask_default = 0x00000000, - regk_ser_rw_rec_baud_div_default = 0x00000000, - regk_ser_rw_rec_ctrl_default = 0x00010000, - regk_ser_rw_tr_baud_div_default = 0x00000000, - regk_ser_rw_tr_ctrl_default = 0x00008000, - regk_ser_rw_tr_dma_en_default = 0x00000000, - regk_ser_rw_xoff_default = 0x00000000, - regk_ser_space = 0x00000003, - regk_ser_stop = 0x00000000, - regk_ser_yes = 0x00000001 -}; -#endif /* __ser_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/sser_defs.h b/include/asm-cris/arch-v32/hwregs/sser_defs.h deleted file mode 100644 index 8d1dab218b91..000000000000 --- a/include/asm-cris/arch-v32/hwregs/sser_defs.h +++ /dev/null @@ -1,331 +0,0 @@ -#ifndef __sser_defs_h -#define __sser_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/syncser/rtl/sser_regs.r - * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp - * last modfied: Mon Apr 11 16:09:48 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile sser_defs.h ../../inst/syncser/rtl/sser_regs.r - * id: $Id: sser_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope sser */ - -/* Register rw_cfg, scope sser, type rw */ -typedef struct { - unsigned int clk_div : 16; - unsigned int base_freq : 3; - unsigned int gate_clk : 1; - unsigned int clkgate_ctrl : 1; - unsigned int clkgate_in : 1; - unsigned int clk_dir : 1; - unsigned int clk_od_mode : 1; - unsigned int out_clk_pol : 1; - unsigned int out_clk_src : 2; - unsigned int clk_in_sel : 1; - unsigned int hold_pol : 1; - unsigned int prepare : 1; - unsigned int en : 1; - unsigned int dummy1 : 1; -} reg_sser_rw_cfg; -#define REG_RD_ADDR_sser_rw_cfg 0 -#define REG_WR_ADDR_sser_rw_cfg 0 - -/* Register rw_frm_cfg, scope sser, type rw */ -typedef struct { - unsigned int wordrate : 10; - unsigned int rec_delay : 3; - unsigned int tr_delay : 3; - unsigned int early_wend : 1; - unsigned int level : 2; - unsigned int type : 1; - unsigned int clk_pol : 1; - unsigned int fr_in_rxclk : 1; - unsigned int clk_src : 1; - unsigned int out_off : 1; - unsigned int out_on : 1; - unsigned int frame_pin_dir : 1; - unsigned int frame_pin_use : 2; - unsigned int status_pin_dir : 1; - unsigned int status_pin_use : 2; - unsigned int dummy1 : 1; -} reg_sser_rw_frm_cfg; -#define REG_RD_ADDR_sser_rw_frm_cfg 4 -#define REG_WR_ADDR_sser_rw_frm_cfg 4 - -/* Register rw_tr_cfg, scope sser, type rw */ -typedef struct { - unsigned int tr_en : 1; - unsigned int stop : 1; - unsigned int urun_stop : 1; - unsigned int eop_stop : 1; - unsigned int sample_size : 6; - unsigned int sh_dir : 1; - unsigned int clk_pol : 1; - unsigned int clk_src : 1; - unsigned int use_dma : 1; - unsigned int mode : 2; - unsigned int frm_src : 1; - unsigned int use60958 : 1; - unsigned int iec60958_ckdiv : 2; - unsigned int rate_ctrl : 1; - unsigned int use_md : 1; - unsigned int dual_i2s : 1; - unsigned int data_pin_use : 2; - unsigned int od_mode : 1; - unsigned int bulk_wspace : 2; - unsigned int dummy1 : 4; -} reg_sser_rw_tr_cfg; -#define REG_RD_ADDR_sser_rw_tr_cfg 8 -#define REG_WR_ADDR_sser_rw_tr_cfg 8 - -/* Register rw_rec_cfg, scope sser, type rw */ -typedef struct { - unsigned int rec_en : 1; - unsigned int force_eop : 1; - unsigned int stop : 1; - unsigned int orun_stop : 1; - unsigned int eop_stop : 1; - unsigned int sample_size : 6; - unsigned int sh_dir : 1; - unsigned int clk_pol : 1; - unsigned int clk_src : 1; - unsigned int use_dma : 1; - unsigned int mode : 2; - unsigned int frm_src : 2; - unsigned int use60958 : 1; - unsigned int iec60958_ui_len : 5; - unsigned int slave2_en : 1; - unsigned int slave3_en : 1; - unsigned int fifo_thr : 2; - unsigned int dummy1 : 3; -} reg_sser_rw_rec_cfg; -#define REG_RD_ADDR_sser_rw_rec_cfg 12 -#define REG_WR_ADDR_sser_rw_rec_cfg 12 - -/* Register rw_tr_data, scope sser, type rw */ -typedef struct { - unsigned int data : 16; - unsigned int md : 1; - unsigned int dummy1 : 15; -} reg_sser_rw_tr_data; -#define REG_RD_ADDR_sser_rw_tr_data 16 -#define REG_WR_ADDR_sser_rw_tr_data 16 - -/* Register r_rec_data, scope sser, type r */ -typedef struct { - unsigned int data : 16; - unsigned int md : 1; - unsigned int ext_clk : 1; - unsigned int status_in : 1; - unsigned int frame_in : 1; - unsigned int din : 1; - unsigned int data_in : 1; - unsigned int clk_in : 1; - unsigned int dummy1 : 9; -} reg_sser_r_rec_data; -#define REG_RD_ADDR_sser_r_rec_data 20 - -/* Register rw_extra, scope sser, type rw */ -typedef struct { - unsigned int clkoff_cycles : 20; - unsigned int clkoff_en : 1; - unsigned int clkon_en : 1; - unsigned int dout_delay : 5; - unsigned int dummy1 : 5; -} reg_sser_rw_extra; -#define REG_RD_ADDR_sser_rw_extra 24 -#define REG_WR_ADDR_sser_rw_extra 24 - -/* Register rw_intr_mask, scope sser, type rw */ -typedef struct { - unsigned int trdy : 1; - unsigned int rdav : 1; - unsigned int tidle : 1; - unsigned int rstop : 1; - unsigned int urun : 1; - unsigned int orun : 1; - unsigned int md_rec : 1; - unsigned int md_sent : 1; - unsigned int r958err : 1; - unsigned int dummy1 : 23; -} reg_sser_rw_intr_mask; -#define REG_RD_ADDR_sser_rw_intr_mask 28 -#define REG_WR_ADDR_sser_rw_intr_mask 28 - -/* Register rw_ack_intr, scope sser, type rw */ -typedef struct { - unsigned int trdy : 1; - unsigned int rdav : 1; - unsigned int tidle : 1; - unsigned int rstop : 1; - unsigned int urun : 1; - unsigned int orun : 1; - unsigned int md_rec : 1; - unsigned int md_sent : 1; - unsigned int r958err : 1; - unsigned int dummy1 : 23; -} reg_sser_rw_ack_intr; -#define REG_RD_ADDR_sser_rw_ack_intr 32 -#define REG_WR_ADDR_sser_rw_ack_intr 32 - -/* Register r_intr, scope sser, type r */ -typedef struct { - unsigned int trdy : 1; - unsigned int rdav : 1; - unsigned int tidle : 1; - unsigned int rstop : 1; - unsigned int urun : 1; - unsigned int orun : 1; - unsigned int md_rec : 1; - unsigned int md_sent : 1; - unsigned int r958err : 1; - unsigned int dummy1 : 23; -} reg_sser_r_intr; -#define REG_RD_ADDR_sser_r_intr 36 - -/* Register r_masked_intr, scope sser, type r */ -typedef struct { - unsigned int trdy : 1; - unsigned int rdav : 1; - unsigned int tidle : 1; - unsigned int rstop : 1; - unsigned int urun : 1; - unsigned int orun : 1; - unsigned int md_rec : 1; - unsigned int md_sent : 1; - unsigned int r958err : 1; - unsigned int dummy1 : 23; -} reg_sser_r_masked_intr; -#define REG_RD_ADDR_sser_r_masked_intr 40 - - -/* Constants */ -enum { - regk_sser_both = 0x00000002, - regk_sser_bulk = 0x00000001, - regk_sser_clk100 = 0x00000000, - regk_sser_clk_in = 0x00000000, - regk_sser_const0 = 0x00000003, - regk_sser_dout = 0x00000002, - regk_sser_edge = 0x00000000, - regk_sser_ext = 0x00000001, - regk_sser_ext_clk = 0x00000001, - regk_sser_f100 = 0x00000000, - regk_sser_f29_493 = 0x00000004, - regk_sser_f32 = 0x00000005, - regk_sser_f32_768 = 0x00000006, - regk_sser_frm = 0x00000003, - regk_sser_gio0 = 0x00000000, - regk_sser_gio1 = 0x00000001, - regk_sser_hispeed = 0x00000001, - regk_sser_hold = 0x00000002, - regk_sser_in = 0x00000000, - regk_sser_inf = 0x00000003, - regk_sser_intern = 0x00000000, - regk_sser_intern_clk = 0x00000001, - regk_sser_intern_tb = 0x00000000, - regk_sser_iso = 0x00000000, - regk_sser_level = 0x00000001, - regk_sser_lospeed = 0x00000000, - regk_sser_lsbfirst = 0x00000000, - regk_sser_msbfirst = 0x00000001, - regk_sser_neg = 0x00000001, - regk_sser_neg_lo = 0x00000000, - regk_sser_no = 0x00000000, - regk_sser_no_clk = 0x00000007, - regk_sser_nojitter = 0x00000002, - regk_sser_out = 0x00000001, - regk_sser_pos = 0x00000000, - regk_sser_pos_hi = 0x00000001, - regk_sser_rec = 0x00000000, - regk_sser_rw_cfg_default = 0x00000000, - regk_sser_rw_extra_default = 0x00000000, - regk_sser_rw_frm_cfg_default = 0x00000000, - regk_sser_rw_intr_mask_default = 0x00000000, - regk_sser_rw_rec_cfg_default = 0x00000000, - regk_sser_rw_tr_cfg_default = 0x01800000, - regk_sser_rw_tr_data_default = 0x00000000, - regk_sser_thr16 = 0x00000001, - regk_sser_thr32 = 0x00000002, - regk_sser_thr8 = 0x00000000, - regk_sser_tr = 0x00000001, - regk_sser_ts_out = 0x00000003, - regk_sser_tx_bulk = 0x00000002, - regk_sser_wiresave = 0x00000002, - regk_sser_yes = 0x00000001 -}; -#endif /* __sser_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/strcop.h b/include/asm-cris/arch-v32/hwregs/strcop.h deleted file mode 100644 index 35131ba466f3..000000000000 --- a/include/asm-cris/arch-v32/hwregs/strcop.h +++ /dev/null @@ -1,57 +0,0 @@ -// $Id: strcop.h,v 1.3 2003/10/22 13:27:12 henriken Exp $ - -// Streamcop meta-data configuration structs - -struct strcop_meta_out { - unsigned char csumsel : 3; - unsigned char ciphsel : 3; - unsigned char ciphconf : 2; - unsigned char hashsel : 3; - unsigned char hashconf : 1; - unsigned char hashmode : 1; - unsigned char decrypt : 1; - unsigned char dlkey : 1; - unsigned char cbcmode : 1; -}; - -struct strcop_meta_in { - unsigned char dmasel : 3; - unsigned char sync : 1; - unsigned char res1 : 5; - unsigned char res2; -}; - -// Source definitions - -enum { - src_none = 0, - src_dma = 1, - src_des = 2, - src_sha1 = 3, - src_csum = 4, - src_aes = 5, - src_md5 = 6, - src_res = 7 -}; - -// Cipher definitions - -enum { - ciph_des = 0, - ciph_3des = 1, - ciph_aes = 2 -}; - -// Hash definitions - -enum { - hash_sha1 = 0, - hash_md5 = 1 -}; - -enum { - hash_noiv = 0, - hash_iv = 1 -}; - - diff --git a/include/asm-cris/arch-v32/hwregs/strcop_defs.h b/include/asm-cris/arch-v32/hwregs/strcop_defs.h deleted file mode 100644 index bd145a49b2c4..000000000000 --- a/include/asm-cris/arch-v32/hwregs/strcop_defs.h +++ /dev/null @@ -1,109 +0,0 @@ -#ifndef __strcop_defs_h -#define __strcop_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/strcop/rtl/strcop_regs.r - * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp - * last modfied: Mon Apr 11 16:09:38 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strcop_defs.h ../../inst/strcop/rtl/strcop_regs.r - * id: $Id: strcop_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope strcop */ - -/* Register rw_cfg, scope strcop, type rw */ -typedef struct { - unsigned int td3 : 1; - unsigned int td2 : 1; - unsigned int td1 : 1; - unsigned int ipend : 1; - unsigned int ignore_sync : 1; - unsigned int en : 1; - unsigned int dummy1 : 26; -} reg_strcop_rw_cfg; -#define REG_RD_ADDR_strcop_rw_cfg 0 -#define REG_WR_ADDR_strcop_rw_cfg 0 - - -/* Constants */ -enum { - regk_strcop_big = 0x00000001, - regk_strcop_d = 0x00000001, - regk_strcop_e = 0x00000000, - regk_strcop_little = 0x00000000, - regk_strcop_rw_cfg_default = 0x00000002 -}; -#endif /* __strcop_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/strmux_defs.h b/include/asm-cris/arch-v32/hwregs/strmux_defs.h deleted file mode 100644 index 67474855c499..000000000000 --- a/include/asm-cris/arch-v32/hwregs/strmux_defs.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef __strmux_defs_h -#define __strmux_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/strmux/rtl/guinness/strmux_regs.r - * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp - * last modfied: Mon Apr 11 16:09:43 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strmux_defs.h ../../inst/strmux/rtl/guinness/strmux_regs.r - * id: $Id: strmux_defs.h,v 1.5 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope strmux */ - -/* Register rw_cfg, scope strmux, type rw */ -typedef struct { - unsigned int dma0 : 3; - unsigned int dma1 : 3; - unsigned int dma2 : 3; - unsigned int dma3 : 3; - unsigned int dma4 : 3; - unsigned int dma5 : 3; - unsigned int dma6 : 3; - unsigned int dma7 : 3; - unsigned int dma8 : 3; - unsigned int dma9 : 3; - unsigned int dummy1 : 2; -} reg_strmux_rw_cfg; -#define REG_RD_ADDR_strmux_rw_cfg 0 -#define REG_WR_ADDR_strmux_rw_cfg 0 - - -/* Constants */ -enum { - regk_strmux_ata = 0x00000003, - regk_strmux_eth0 = 0x00000001, - regk_strmux_eth1 = 0x00000004, - regk_strmux_ext0 = 0x00000001, - regk_strmux_ext1 = 0x00000001, - regk_strmux_ext2 = 0x00000001, - regk_strmux_ext3 = 0x00000001, - regk_strmux_iop0 = 0x00000002, - regk_strmux_iop1 = 0x00000001, - regk_strmux_off = 0x00000000, - regk_strmux_p21 = 0x00000004, - regk_strmux_rw_cfg_default = 0x00000000, - regk_strmux_ser0 = 0x00000002, - regk_strmux_ser1 = 0x00000002, - regk_strmux_ser2 = 0x00000004, - regk_strmux_ser3 = 0x00000003, - regk_strmux_sser0 = 0x00000003, - regk_strmux_sser1 = 0x00000003, - regk_strmux_strcop = 0x00000002 -}; -#endif /* __strmux_defs_h */ diff --git a/include/asm-cris/arch-v32/hwregs/supp_reg.h b/include/asm-cris/arch-v32/hwregs/supp_reg.h deleted file mode 100644 index ffe49625ae36..000000000000 --- a/include/asm-cris/arch-v32/hwregs/supp_reg.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef __SUPP_REG_H__ -#define __SUPP_REG_H__ - -/* Macros for reading and writing support/special registers. */ - -#ifndef STRINGIFYFY -#define STRINGIFYFY(i) #i -#endif - -#ifndef STRINGIFY -#define STRINGIFY(i) STRINGIFYFY(i) -#endif - -#define SPEC_REG_BZ "BZ" -#define SPEC_REG_VR "VR" -#define SPEC_REG_PID "PID" -#define SPEC_REG_SRS "SRS" -#define SPEC_REG_WZ "WZ" -#define SPEC_REG_EXS "EXS" -#define SPEC_REG_EDA "EDA" -#define SPEC_REG_MOF "MOF" -#define SPEC_REG_DZ "DZ" -#define SPEC_REG_EBP "EBP" -#define SPEC_REG_ERP "ERP" -#define SPEC_REG_SRP "SRP" -#define SPEC_REG_NRP "NRP" -#define SPEC_REG_CCS "CCS" -#define SPEC_REG_USP "USP" -#define SPEC_REG_SPC "SPC" - -#define RW_MM_CFG 0 -#define RW_MM_KBASE_LO 1 -#define RW_MM_KBASE_HI 2 -#define RW_MM_CAUSE 3 -#define RW_MM_TLB_SEL 4 -#define RW_MM_TLB_LO 5 -#define RW_MM_TLB_HI 6 -#define RW_MM_TLB_PGD 7 - -#define BANK_GC 0 -#define BANK_IM 1 -#define BANK_DM 2 -#define BANK_BP 3 - -#define RW_GC_CFG 0 -#define RW_GC_CCS 1 -#define RW_GC_SRS 2 -#define RW_GC_NRP 3 -#define RW_GC_EXS 4 -#define RW_GC_R0 8 -#define RW_GC_R1 9 - -#define SPEC_REG_WR(r,v) \ -__asm__ __volatile__ ("move %0, $" r : : "r" (v)); - -#define SPEC_REG_RD(r,v) \ -__asm__ __volatile__ ("move $" r ",%0" : "=r" (v)); - -#define NOP() \ - __asm__ __volatile__ ("nop"); - -#define SUPP_BANK_SEL(b) \ - SPEC_REG_WR(SPEC_REG_SRS,b); \ - NOP(); \ - NOP(); \ - NOP(); - -#define SUPP_REG_WR(r,v) \ -__asm__ __volatile__ ("move %0, $S" STRINGIFYFY(r) "\n\t" \ - "nop\n\t" \ - "nop\n\t" \ - "nop\n\t" \ - : : "r" (v)); - -#define SUPP_REG_RD(r,v) \ -__asm__ __volatile__ ("move $S" STRINGIFYFY(r) ",%0" : "=r" (v)); - -#endif /* __SUPP_REG_H__ */ diff --git a/include/asm-cris/arch-v32/intmem.h b/include/asm-cris/arch-v32/intmem.h deleted file mode 100644 index c0ada33bf90f..000000000000 --- a/include/asm-cris/arch-v32/intmem.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _ASM_CRIS_INTMEM_H -#define _ASM_CRIS_INTMEM_H - -void* crisv32_intmem_alloc(unsigned size, unsigned align); -void crisv32_intmem_free(void* addr); -void* crisv32_intmem_phys_to_virt(unsigned long addr); -unsigned long crisv32_intmem_virt_to_phys(void *addr); - -#endif /* _ASM_CRIS_ARCH_INTMEM_H */ diff --git a/include/asm-cris/arch-v32/io.h b/include/asm-cris/arch-v32/io.h deleted file mode 100644 index 72024452cea9..000000000000 --- a/include/asm-cris/arch-v32/io.h +++ /dev/null @@ -1,136 +0,0 @@ -#ifndef _ASM_ARCH_CRIS_IO_H -#define _ASM_ARCH_CRIS_IO_H - -#include -#include -#include -#include - -enum crisv32_io_dir -{ - crisv32_io_dir_in = 0, - crisv32_io_dir_out = 1 -}; - -struct crisv32_ioport -{ - volatile unsigned long *oe; - volatile unsigned long *data; - volatile unsigned long *data_in; - unsigned int pin_count; - spinlock_t lock; -}; - -struct crisv32_iopin -{ - struct crisv32_ioport* port; - int bit; -}; - -extern struct crisv32_ioport crisv32_ioports[]; - -extern struct crisv32_iopin crisv32_led1_green; -extern struct crisv32_iopin crisv32_led1_red; -extern struct crisv32_iopin crisv32_led2_green; -extern struct crisv32_iopin crisv32_led2_red; -extern struct crisv32_iopin crisv32_led3_green; -extern struct crisv32_iopin crisv32_led3_red; - -extern struct crisv32_iopin crisv32_led_net0_green; -extern struct crisv32_iopin crisv32_led_net0_red; -extern struct crisv32_iopin crisv32_led_net1_green; -extern struct crisv32_iopin crisv32_led_net1_red; - -static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val) -{ - unsigned long flags; - spin_lock_irqsave(&iopin->port->lock, flags); - - if (val) - *iopin->port->data |= iopin->bit; - else - *iopin->port->data &= ~iopin->bit; - - spin_unlock_irqrestore(&iopin->port->lock, flags); -} - -static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin, - enum crisv32_io_dir dir) -{ - unsigned long flags; - spin_lock_irqsave(&iopin->port->lock, flags); - - if (dir == crisv32_io_dir_in) - *iopin->port->oe &= ~iopin->bit; - else - *iopin->port->oe |= iopin->bit; - - spin_unlock_irqrestore(&iopin->port->lock, flags); -} - -static inline int crisv32_io_rd(struct crisv32_iopin* iopin) -{ - return ((*iopin->port->data_in & iopin->bit) ? 1 : 0); -} - -int crisv32_io_get(struct crisv32_iopin* iopin, - unsigned int port, unsigned int pin); -int crisv32_io_get_name(struct crisv32_iopin* iopin, - const char *name); - -#define CRIS_LED_OFF 0x00 -#define CRIS_LED_GREEN 0x01 -#define CRIS_LED_RED 0x02 -#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED) - -#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) -#define CRIS_LED_NETWORK_GRP0_SET(x) \ - do { \ - CRIS_LED_NETWORK_GRP0_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_NETWORK_GRP0_SET_R((x) & CRIS_LED_RED); \ - } while (0) -#else -#define CRIS_LED_NETWORK_GRP0_SET(x) while (0) {} -#endif - -#define CRIS_LED_NETWORK_GRP0_SET_G(x) \ - crisv32_io_set(&crisv32_led_net0_green, !(x)); - -#define CRIS_LED_NETWORK_GRP0_SET_R(x) \ - crisv32_io_set(&crisv32_led_net0_red, !(x)); - -#if defined(CONFIG_ETRAX_NBR_LED_GRP_TWO) -#define CRIS_LED_NETWORK_GRP1_SET(x) \ - do { \ - CRIS_LED_NETWORK_GRP1_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_NETWORK_GRP1_SET_R((x) & CRIS_LED_RED); \ - } while (0) -#else -#define CRIS_LED_NETWORK_GRP1_SET(x) while (0) {} -#endif - -#define CRIS_LED_NETWORK_GRP1_SET_G(x) \ - crisv32_io_set(&crisv32_led_net1_green, !(x)); - -#define CRIS_LED_NETWORK_GRP1_SET_R(x) \ - crisv32_io_set(&crisv32_led_net1_red, !(x)); - -#define CRIS_LED_ACTIVE_SET(x) \ - do { \ - CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \ - } while (0) - -#define CRIS_LED_ACTIVE_SET_G(x) \ - crisv32_io_set(&crisv32_led2_green, !(x)); -#define CRIS_LED_ACTIVE_SET_R(x) \ - crisv32_io_set(&crisv32_led2_red, !(x)); -#define CRIS_LED_DISK_WRITE(x) \ - do{\ - crisv32_io_set(&crisv32_led3_green, !(x)); \ - crisv32_io_set(&crisv32_led3_red, !(x)); \ - }while(0) -#define CRIS_LED_DISK_READ(x) \ - crisv32_io_set(&crisv32_led3_green, !(x)); - -#endif diff --git a/include/asm-cris/arch-v32/irq.h b/include/asm-cris/arch-v32/irq.h deleted file mode 100644 index 9e4c9fbdfddf..000000000000 --- a/include/asm-cris/arch-v32/irq.h +++ /dev/null @@ -1,124 +0,0 @@ -#ifndef _ASM_ARCH_IRQ_H -#define _ASM_ARCH_IRQ_H - -#include - -/* Number of non-cpu interrupts. */ -#define NR_IRQS NBR_INTR_VECT /* Exceptions + IRQs */ -#define FIRST_IRQ 0x31 /* Exception number for first IRQ */ -#define NR_REAL_IRQS (NBR_INTR_VECT - FIRST_IRQ) /* IRQs */ -#if NR_REAL_IRQS > 32 -#define MACH_IRQS 64 -#else -#define MACH_IRQS 32 -#endif - -#ifndef __ASSEMBLY__ -/* Global IRQ vector. */ -typedef void (*irqvectptr)(void); - -struct etrax_interrupt_vector { - irqvectptr v[256]; -}; - -extern struct etrax_interrupt_vector *etrax_irv; /* head.S */ - -void mask_irq(int irq); -void unmask_irq(int irq); - -void set_exception_vector(int n, irqvectptr addr); - -/* Save registers so that they match pt_regs. */ -#define SAVE_ALL \ - "subq 12,$sp\n\t" \ - "move $erp,[$sp]\n\t" \ - "subq 4,$sp\n\t" \ - "move $srp,[$sp]\n\t" \ - "subq 4,$sp\n\t" \ - "move $ccs,[$sp]\n\t" \ - "subq 4,$sp\n\t" \ - "move $spc,[$sp]\n\t" \ - "subq 4,$sp\n\t" \ - "move $mof,[$sp]\n\t" \ - "subq 4,$sp\n\t" \ - "move $srs,[$sp]\n\t" \ - "subq 4,$sp\n\t" \ - "move.d $acr,[$sp]\n\t" \ - "subq 14*4,$sp\n\t" \ - "movem $r13,[$sp]\n\t" \ - "subq 4,$sp\n\t" \ - "move.d $r10,[$sp]\n" - -#define STR2(x) #x -#define STR(x) STR2(x) - -#define IRQ_NAME2(nr) nr##_interrupt(void) -#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) - -/* - * The reason for setting the S-bit when debugging the kernel is that we want - * hardware breakpoints to remain active while we are in an exception handler. - * Note that we cannot simply copy S1, since we may come here from user-space, - * or any context where the S-bit wasn't set. - */ -#ifdef CONFIG_ETRAX_KGDB -#define KGDB_FIXUP \ - "move $ccs, $r10\n\t" \ - "or.d (1<<9), $r10\n\t" \ - "move $r10, $ccs\n\t" -#else -#define KGDB_FIXUP "" -#endif - -/* - * Make sure the causing IRQ is blocked, then call do_IRQ. After that, unblock - * and jump to ret_from_intr which is found in entry.S. - * - * The reason for blocking the IRQ is to allow an sti() before the handler, - * which will acknowledge the interrupt, is run. The actual blocking is made - * by crisv32_do_IRQ. - */ -#define BUILD_IRQ(nr) \ -void IRQ_NAME(nr); \ -__asm__ ( \ - ".text\n\t" \ - "IRQ" #nr "_interrupt:\n\t" \ - SAVE_ALL \ - KGDB_FIXUP \ - "move.d "#nr",$r10\n\t" \ - "move.d $sp, $r12\n\t" \ - "jsr crisv32_do_IRQ\n\t" \ - "moveq 1, $r11\n\t" \ - "jump ret_from_intr\n\t" \ - "nop\n\t"); -/* - * This is subtle. The timer interrupt is crucial and it should not be disabled - * for too long. However, if it had been a normal interrupt as per BUILD_IRQ, it - * would have been BLOCK'ed, and then softirq's are run before we return here to - * UNBLOCK. If the softirq's take too much time to run, the timer irq won't run - * and the watchdog will kill us. - * - * Furthermore, if a lot of other irq's occur before we return here, the - * multiple_irq handler is run and it prioritizes the timer interrupt. However - * if we had BLOCK'edit here, we would not get the multiple_irq at all. - * - * The non-blocking here is based on the knowledge that the timer interrupt is - * registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not - * be an sti() before the timer irq handler is run to acknowledge the interrupt. - */ -#define BUILD_TIMER_IRQ(nr, mask) \ -void IRQ_NAME(nr); \ -__asm__ ( \ - ".text\n\t" \ - "IRQ" #nr "_interrupt:\n\t" \ - SAVE_ALL \ - KGDB_FIXUP \ - "move.d "#nr",$r10\n\t" \ - "move.d $sp,$r12\n\t" \ - "jsr crisv32_do_IRQ\n\t" \ - "moveq 0,$r11\n\t" \ - "jump ret_from_intr\n\t" \ - "nop\n\t"); - -#endif /* __ASSEMBLY__ */ -#endif /* _ASM_ARCH_IRQ_H */ diff --git a/include/asm-cris/arch-v32/mach-a3/arbiter.h b/include/asm-cris/arch-v32/mach-a3/arbiter.h deleted file mode 100644 index 65e9d6ff0520..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/arbiter.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_ARBITER_H -#define _ASM_CRIS_ARCH_ARBITER_H - -#define EXT_REGION 0 -#define INT_REGION 1 - -typedef void (watch_callback)(void); - -enum { - arbiter_all_dmas = 0x7fe, - arbiter_cpu = 0x1800, - arbiter_all_clients = 0x7fff -}; - -enum { - arbiter_bar_all_clients = 0x1ff -}; - -enum { - arbiter_all_read = 0x55, - arbiter_all_write = 0xaa, - arbiter_all_accesses = 0xff -}; - -#define MARB_CLIENTS(foo_cli, bar_cli) (((bar_cli) << 16) | (foo_cli)) - -int crisv32_arbiter_allocate_bandwidth(int client, int region, - unsigned long bandwidth); -int crisv32_arbiter_watch(unsigned long start, unsigned long size, - unsigned long clients, unsigned long accesses, - watch_callback * cb); -int crisv32_arbiter_unwatch(int id); - -#endif diff --git a/include/asm-cris/arch-v32/mach-a3/dma.h b/include/asm-cris/arch-v32/mach-a3/dma.h deleted file mode 100644 index 9e8eb13b601d..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/dma.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASM_ARCH_CRIS_DMA_H -#define _ASM_ARCH_CRIS_DMA_H - -/* Defines for using and allocating dma channels. */ - -#define MAX_DMA_CHANNELS 12 /* 8 and 10 not used. */ - -enum dma_owner { - dma_eth, - dma_ser0, - dma_ser1, - dma_ser2, - dma_ser3, - dma_ser4, - dma_iop, - dma_sser, - dma_strp, - dma_h264, - dma_jpeg -}; - -int crisv32_request_dma(unsigned int dmanr, const char *device_id, - unsigned options, unsigned bandwidth, enum dma_owner owner); -void crisv32_free_dma(unsigned int dmanr); - -/* Masks used by crisv32_request_dma options: */ -#define DMA_VERBOSE_ON_ERROR 1 -#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR) -#define DMA_INT_MEM 4 - -#endif /* _ASM_ARCH_CRIS_DMA_H */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/clkgen_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/clkgen_defs_asm.h deleted file mode 100644 index 02855adf63e8..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/clkgen_defs_asm.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef __clkgen_defs_asm_h -#define __clkgen_defs_asm_h - -/* - * This file is autogenerated from - * file: clkgen.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile clkgen_defs_asm.h clkgen.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register r_bootsel, scope clkgen, type r */ -#define reg_clkgen_r_bootsel___boot_mode___lsb 0 -#define reg_clkgen_r_bootsel___boot_mode___width 5 -#define reg_clkgen_r_bootsel___intern_main_clk___lsb 5 -#define reg_clkgen_r_bootsel___intern_main_clk___width 1 -#define reg_clkgen_r_bootsel___intern_main_clk___bit 5 -#define reg_clkgen_r_bootsel___extern_usb2_clk___lsb 6 -#define reg_clkgen_r_bootsel___extern_usb2_clk___width 1 -#define reg_clkgen_r_bootsel___extern_usb2_clk___bit 6 -#define reg_clkgen_r_bootsel_offset 0 - -/* Register rw_clk_ctrl, scope clkgen, type rw */ -#define reg_clkgen_rw_clk_ctrl___pll___lsb 0 -#define reg_clkgen_rw_clk_ctrl___pll___width 1 -#define reg_clkgen_rw_clk_ctrl___pll___bit 0 -#define reg_clkgen_rw_clk_ctrl___cpu___lsb 1 -#define reg_clkgen_rw_clk_ctrl___cpu___width 1 -#define reg_clkgen_rw_clk_ctrl___cpu___bit 1 -#define reg_clkgen_rw_clk_ctrl___iop_usb___lsb 2 -#define reg_clkgen_rw_clk_ctrl___iop_usb___width 1 -#define reg_clkgen_rw_clk_ctrl___iop_usb___bit 2 -#define reg_clkgen_rw_clk_ctrl___vin___lsb 3 -#define reg_clkgen_rw_clk_ctrl___vin___width 1 -#define reg_clkgen_rw_clk_ctrl___vin___bit 3 -#define reg_clkgen_rw_clk_ctrl___sclr___lsb 4 -#define reg_clkgen_rw_clk_ctrl___sclr___width 1 -#define reg_clkgen_rw_clk_ctrl___sclr___bit 4 -#define reg_clkgen_rw_clk_ctrl___h264___lsb 5 -#define reg_clkgen_rw_clk_ctrl___h264___width 1 -#define reg_clkgen_rw_clk_ctrl___h264___bit 5 -#define reg_clkgen_rw_clk_ctrl___ddr2___lsb 6 -#define reg_clkgen_rw_clk_ctrl___ddr2___width 1 -#define reg_clkgen_rw_clk_ctrl___ddr2___bit 6 -#define reg_clkgen_rw_clk_ctrl___vout_hist___lsb 7 -#define reg_clkgen_rw_clk_ctrl___vout_hist___width 1 -#define reg_clkgen_rw_clk_ctrl___vout_hist___bit 7 -#define reg_clkgen_rw_clk_ctrl___eth___lsb 8 -#define reg_clkgen_rw_clk_ctrl___eth___width 1 -#define reg_clkgen_rw_clk_ctrl___eth___bit 8 -#define reg_clkgen_rw_clk_ctrl___ccd_tg_200___lsb 9 -#define reg_clkgen_rw_clk_ctrl___ccd_tg_200___width 1 -#define reg_clkgen_rw_clk_ctrl___ccd_tg_200___bit 9 -#define reg_clkgen_rw_clk_ctrl___dma0_1_eth___lsb 10 -#define reg_clkgen_rw_clk_ctrl___dma0_1_eth___width 1 -#define reg_clkgen_rw_clk_ctrl___dma0_1_eth___bit 10 -#define reg_clkgen_rw_clk_ctrl___ccd_tg_100___lsb 11 -#define reg_clkgen_rw_clk_ctrl___ccd_tg_100___width 1 -#define reg_clkgen_rw_clk_ctrl___ccd_tg_100___bit 11 -#define reg_clkgen_rw_clk_ctrl___jpeg___lsb 12 -#define reg_clkgen_rw_clk_ctrl___jpeg___width 1 -#define reg_clkgen_rw_clk_ctrl___jpeg___bit 12 -#define reg_clkgen_rw_clk_ctrl___sser_ser_dma6_7___lsb 13 -#define reg_clkgen_rw_clk_ctrl___sser_ser_dma6_7___width 1 -#define reg_clkgen_rw_clk_ctrl___sser_ser_dma6_7___bit 13 -#define reg_clkgen_rw_clk_ctrl___strdma0_2_video___lsb 14 -#define reg_clkgen_rw_clk_ctrl___strdma0_2_video___width 1 -#define reg_clkgen_rw_clk_ctrl___strdma0_2_video___bit 14 -#define reg_clkgen_rw_clk_ctrl___dma2_3_strcop___lsb 15 -#define reg_clkgen_rw_clk_ctrl___dma2_3_strcop___width 1 -#define reg_clkgen_rw_clk_ctrl___dma2_3_strcop___bit 15 -#define reg_clkgen_rw_clk_ctrl___dma4_5_iop___lsb 16 -#define reg_clkgen_rw_clk_ctrl___dma4_5_iop___width 1 -#define reg_clkgen_rw_clk_ctrl___dma4_5_iop___bit 16 -#define reg_clkgen_rw_clk_ctrl___dma9_11___lsb 17 -#define reg_clkgen_rw_clk_ctrl___dma9_11___width 1 -#define reg_clkgen_rw_clk_ctrl___dma9_11___bit 17 -#define reg_clkgen_rw_clk_ctrl___memarb_bar_ddr___lsb 18 -#define reg_clkgen_rw_clk_ctrl___memarb_bar_ddr___width 1 -#define reg_clkgen_rw_clk_ctrl___memarb_bar_ddr___bit 18 -#define reg_clkgen_rw_clk_ctrl___sclr_h264___lsb 19 -#define reg_clkgen_rw_clk_ctrl___sclr_h264___width 1 -#define reg_clkgen_rw_clk_ctrl___sclr_h264___bit 19 -#define reg_clkgen_rw_clk_ctrl_offset 4 - - -/* Constants */ -#define regk_clkgen_eth1000_rx 0x0000000c -#define regk_clkgen_eth1000_tx 0x0000000e -#define regk_clkgen_eth100_rx 0x0000001d -#define regk_clkgen_eth100_rx_half 0x0000001c -#define regk_clkgen_eth100_tx 0x0000001f -#define regk_clkgen_eth100_tx_half 0x0000001e -#define regk_clkgen_nand_3_2 0x00000000 -#define regk_clkgen_nand_3_2_0x30 0x00000002 -#define regk_clkgen_nand_3_2_0x30_pll 0x00000012 -#define regk_clkgen_nand_3_2_pll 0x00000010 -#define regk_clkgen_nand_3_3 0x00000001 -#define regk_clkgen_nand_3_3_0x30 0x00000003 -#define regk_clkgen_nand_3_3_0x30_pll 0x00000013 -#define regk_clkgen_nand_3_3_pll 0x00000011 -#define regk_clkgen_nand_4_2 0x00000004 -#define regk_clkgen_nand_4_2_0x30 0x00000006 -#define regk_clkgen_nand_4_2_0x30_pll 0x00000016 -#define regk_clkgen_nand_4_2_pll 0x00000014 -#define regk_clkgen_nand_4_3 0x00000005 -#define regk_clkgen_nand_4_3_0x30 0x00000007 -#define regk_clkgen_nand_4_3_0x30_pll 0x00000017 -#define regk_clkgen_nand_4_3_pll 0x00000015 -#define regk_clkgen_nand_5_2 0x00000008 -#define regk_clkgen_nand_5_2_0x30 0x0000000a -#define regk_clkgen_nand_5_2_0x30_pll 0x0000001a -#define regk_clkgen_nand_5_2_pll 0x00000018 -#define regk_clkgen_nand_5_3 0x00000009 -#define regk_clkgen_nand_5_3_0x30 0x0000000b -#define regk_clkgen_nand_5_3_0x30_pll 0x0000001b -#define regk_clkgen_nand_5_3_pll 0x00000019 -#define regk_clkgen_no 0x00000000 -#define regk_clkgen_rw_clk_ctrl_default 0x00000002 -#define regk_clkgen_ser 0x0000000d -#define regk_clkgen_ser_pll 0x0000000f -#define regk_clkgen_yes 0x00000001 -#endif /* __clkgen_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/ddr2_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/ddr2_defs_asm.h deleted file mode 100644 index b12be03edacb..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/ddr2_defs_asm.h +++ /dev/null @@ -1,266 +0,0 @@ -#ifndef __ddr2_defs_asm_h -#define __ddr2_defs_asm_h - -/* - * This file is autogenerated from - * file: ddr2.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile ddr2_defs_asm.h ddr2.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_cfg, scope ddr2, type rw */ -#define reg_ddr2_rw_cfg___col_width___lsb 0 -#define reg_ddr2_rw_cfg___col_width___width 4 -#define reg_ddr2_rw_cfg___nr_banks___lsb 4 -#define reg_ddr2_rw_cfg___nr_banks___width 1 -#define reg_ddr2_rw_cfg___nr_banks___bit 4 -#define reg_ddr2_rw_cfg___bw___lsb 5 -#define reg_ddr2_rw_cfg___bw___width 1 -#define reg_ddr2_rw_cfg___bw___bit 5 -#define reg_ddr2_rw_cfg___nr_ref___lsb 6 -#define reg_ddr2_rw_cfg___nr_ref___width 4 -#define reg_ddr2_rw_cfg___ref_interval___lsb 10 -#define reg_ddr2_rw_cfg___ref_interval___width 11 -#define reg_ddr2_rw_cfg___odt_ctrl___lsb 21 -#define reg_ddr2_rw_cfg___odt_ctrl___width 2 -#define reg_ddr2_rw_cfg___odt_mem___lsb 23 -#define reg_ddr2_rw_cfg___odt_mem___width 1 -#define reg_ddr2_rw_cfg___odt_mem___bit 23 -#define reg_ddr2_rw_cfg___imp_strength___lsb 24 -#define reg_ddr2_rw_cfg___imp_strength___width 1 -#define reg_ddr2_rw_cfg___imp_strength___bit 24 -#define reg_ddr2_rw_cfg___auto_imp_cal___lsb 25 -#define reg_ddr2_rw_cfg___auto_imp_cal___width 1 -#define reg_ddr2_rw_cfg___auto_imp_cal___bit 25 -#define reg_ddr2_rw_cfg___imp_cal_override___lsb 26 -#define reg_ddr2_rw_cfg___imp_cal_override___width 1 -#define reg_ddr2_rw_cfg___imp_cal_override___bit 26 -#define reg_ddr2_rw_cfg___dll_override___lsb 27 -#define reg_ddr2_rw_cfg___dll_override___width 1 -#define reg_ddr2_rw_cfg___dll_override___bit 27 -#define reg_ddr2_rw_cfg_offset 0 - -/* Register rw_timing, scope ddr2, type rw */ -#define reg_ddr2_rw_timing___wr___lsb 0 -#define reg_ddr2_rw_timing___wr___width 3 -#define reg_ddr2_rw_timing___rcd___lsb 3 -#define reg_ddr2_rw_timing___rcd___width 3 -#define reg_ddr2_rw_timing___rp___lsb 6 -#define reg_ddr2_rw_timing___rp___width 3 -#define reg_ddr2_rw_timing___ras___lsb 9 -#define reg_ddr2_rw_timing___ras___width 4 -#define reg_ddr2_rw_timing___rfc___lsb 13 -#define reg_ddr2_rw_timing___rfc___width 7 -#define reg_ddr2_rw_timing___rc___lsb 20 -#define reg_ddr2_rw_timing___rc___width 5 -#define reg_ddr2_rw_timing___rtp___lsb 25 -#define reg_ddr2_rw_timing___rtp___width 2 -#define reg_ddr2_rw_timing___rtw___lsb 27 -#define reg_ddr2_rw_timing___rtw___width 3 -#define reg_ddr2_rw_timing___wtr___lsb 30 -#define reg_ddr2_rw_timing___wtr___width 2 -#define reg_ddr2_rw_timing_offset 4 - -/* Register rw_latency, scope ddr2, type rw */ -#define reg_ddr2_rw_latency___cas___lsb 0 -#define reg_ddr2_rw_latency___cas___width 3 -#define reg_ddr2_rw_latency___additive___lsb 3 -#define reg_ddr2_rw_latency___additive___width 3 -#define reg_ddr2_rw_latency_offset 8 - -/* Register rw_phy_cfg, scope ddr2, type rw */ -#define reg_ddr2_rw_phy_cfg___en___lsb 0 -#define reg_ddr2_rw_phy_cfg___en___width 1 -#define reg_ddr2_rw_phy_cfg___en___bit 0 -#define reg_ddr2_rw_phy_cfg_offset 12 - -/* Register rw_phy_ctrl, scope ddr2, type rw */ -#define reg_ddr2_rw_phy_ctrl___rst___lsb 0 -#define reg_ddr2_rw_phy_ctrl___rst___width 1 -#define reg_ddr2_rw_phy_ctrl___rst___bit 0 -#define reg_ddr2_rw_phy_ctrl___cal_rst___lsb 1 -#define reg_ddr2_rw_phy_ctrl___cal_rst___width 1 -#define reg_ddr2_rw_phy_ctrl___cal_rst___bit 1 -#define reg_ddr2_rw_phy_ctrl___cal_start___lsb 2 -#define reg_ddr2_rw_phy_ctrl___cal_start___width 1 -#define reg_ddr2_rw_phy_ctrl___cal_start___bit 2 -#define reg_ddr2_rw_phy_ctrl_offset 16 - -/* Register rw_ctrl, scope ddr2, type rw */ -#define reg_ddr2_rw_ctrl___mrs_data___lsb 0 -#define reg_ddr2_rw_ctrl___mrs_data___width 16 -#define reg_ddr2_rw_ctrl___cmd___lsb 16 -#define reg_ddr2_rw_ctrl___cmd___width 8 -#define reg_ddr2_rw_ctrl_offset 20 - -/* Register rw_pwr_down, scope ddr2, type rw */ -#define reg_ddr2_rw_pwr_down___self_ref___lsb 0 -#define reg_ddr2_rw_pwr_down___self_ref___width 2 -#define reg_ddr2_rw_pwr_down___phy_en___lsb 2 -#define reg_ddr2_rw_pwr_down___phy_en___width 1 -#define reg_ddr2_rw_pwr_down___phy_en___bit 2 -#define reg_ddr2_rw_pwr_down_offset 24 - -/* Register r_stat, scope ddr2, type r */ -#define reg_ddr2_r_stat___dll_lock___lsb 0 -#define reg_ddr2_r_stat___dll_lock___width 1 -#define reg_ddr2_r_stat___dll_lock___bit 0 -#define reg_ddr2_r_stat___dll_delay_code___lsb 1 -#define reg_ddr2_r_stat___dll_delay_code___width 7 -#define reg_ddr2_r_stat___imp_cal_done___lsb 8 -#define reg_ddr2_r_stat___imp_cal_done___width 1 -#define reg_ddr2_r_stat___imp_cal_done___bit 8 -#define reg_ddr2_r_stat___imp_cal_fault___lsb 9 -#define reg_ddr2_r_stat___imp_cal_fault___width 1 -#define reg_ddr2_r_stat___imp_cal_fault___bit 9 -#define reg_ddr2_r_stat___cal_imp_pu___lsb 10 -#define reg_ddr2_r_stat___cal_imp_pu___width 4 -#define reg_ddr2_r_stat___cal_imp_pd___lsb 14 -#define reg_ddr2_r_stat___cal_imp_pd___width 4 -#define reg_ddr2_r_stat_offset 28 - -/* Register rw_imp_ctrl, scope ddr2, type rw */ -#define reg_ddr2_rw_imp_ctrl___imp_pu___lsb 0 -#define reg_ddr2_rw_imp_ctrl___imp_pu___width 4 -#define reg_ddr2_rw_imp_ctrl___imp_pd___lsb 4 -#define reg_ddr2_rw_imp_ctrl___imp_pd___width 4 -#define reg_ddr2_rw_imp_ctrl_offset 32 - -#define STRIDE_ddr2_rw_dll_ctrl 4 -/* Register rw_dll_ctrl, scope ddr2, type rw */ -#define reg_ddr2_rw_dll_ctrl___mode___lsb 0 -#define reg_ddr2_rw_dll_ctrl___mode___width 1 -#define reg_ddr2_rw_dll_ctrl___mode___bit 0 -#define reg_ddr2_rw_dll_ctrl___clk_delay___lsb 1 -#define reg_ddr2_rw_dll_ctrl___clk_delay___width 7 -#define reg_ddr2_rw_dll_ctrl_offset 36 - -#define STRIDE_ddr2_rw_dqs_dll_ctrl 4 -/* Register rw_dqs_dll_ctrl, scope ddr2, type rw */ -#define reg_ddr2_rw_dqs_dll_ctrl___dqs90_delay___lsb 0 -#define reg_ddr2_rw_dqs_dll_ctrl___dqs90_delay___width 7 -#define reg_ddr2_rw_dqs_dll_ctrl___dqs180_delay___lsb 7 -#define reg_ddr2_rw_dqs_dll_ctrl___dqs180_delay___width 7 -#define reg_ddr2_rw_dqs_dll_ctrl___dqs270_delay___lsb 14 -#define reg_ddr2_rw_dqs_dll_ctrl___dqs270_delay___width 7 -#define reg_ddr2_rw_dqs_dll_ctrl___dqs360_delay___lsb 21 -#define reg_ddr2_rw_dqs_dll_ctrl___dqs360_delay___width 7 -#define reg_ddr2_rw_dqs_dll_ctrl_offset 52 - - -/* Constants */ -#define regk_ddr2_al0 0x00000000 -#define regk_ddr2_al1 0x00000008 -#define regk_ddr2_al2 0x00000010 -#define regk_ddr2_al3 0x00000018 -#define regk_ddr2_al4 0x00000020 -#define regk_ddr2_auto 0x00000003 -#define regk_ddr2_bank4 0x00000000 -#define regk_ddr2_bank8 0x00000001 -#define regk_ddr2_bl4 0x00000002 -#define regk_ddr2_bl8 0x00000003 -#define regk_ddr2_bt_il 0x00000008 -#define regk_ddr2_bt_seq 0x00000000 -#define regk_ddr2_bw16 0x00000001 -#define regk_ddr2_bw32 0x00000000 -#define regk_ddr2_cas2 0x00000020 -#define regk_ddr2_cas3 0x00000030 -#define regk_ddr2_cas4 0x00000040 -#define regk_ddr2_cas5 0x00000050 -#define regk_ddr2_deselect 0x000000c0 -#define regk_ddr2_dic_weak 0x00000002 -#define regk_ddr2_direct 0x00000001 -#define regk_ddr2_dis 0x00000000 -#define regk_ddr2_dll_dis 0x00000001 -#define regk_ddr2_dll_en 0x00000000 -#define regk_ddr2_dll_rst 0x00000100 -#define regk_ddr2_emrs 0x00000081 -#define regk_ddr2_emrs2 0x00000082 -#define regk_ddr2_emrs3 0x00000083 -#define regk_ddr2_full 0x00000001 -#define regk_ddr2_hi_ref_rate 0x00000080 -#define regk_ddr2_mrs 0x00000080 -#define regk_ddr2_no 0x00000000 -#define regk_ddr2_nop 0x000000b8 -#define regk_ddr2_ocd_adj 0x00000200 -#define regk_ddr2_ocd_default 0x00000380 -#define regk_ddr2_ocd_drive0 0x00000100 -#define regk_ddr2_ocd_drive1 0x00000080 -#define regk_ddr2_ocd_exit 0x00000000 -#define regk_ddr2_odt_dis 0x00000000 -#define regk_ddr2_offs 0x00000000 -#define regk_ddr2_pre 0x00000090 -#define regk_ddr2_pre_all 0x00000400 -#define regk_ddr2_pwr_down_fast 0x00000000 -#define regk_ddr2_pwr_down_slow 0x00001000 -#define regk_ddr2_ref 0x00000088 -#define regk_ddr2_rtt150 0x00000040 -#define regk_ddr2_rtt50 0x00000044 -#define regk_ddr2_rtt75 0x00000004 -#define regk_ddr2_rw_cfg_default 0x00186000 -#define regk_ddr2_rw_dll_ctrl_default 0x00000000 -#define regk_ddr2_rw_dll_ctrl_size 0x00000004 -#define regk_ddr2_rw_dqs_dll_ctrl_default 0x00000000 -#define regk_ddr2_rw_dqs_dll_ctrl_size 0x00000004 -#define regk_ddr2_rw_latency_default 0x00000000 -#define regk_ddr2_rw_phy_cfg_default 0x00000000 -#define regk_ddr2_rw_pwr_down_default 0x00000000 -#define regk_ddr2_rw_timing_default 0x00000000 -#define regk_ddr2_s1Gb 0x0000001a -#define regk_ddr2_s256Mb 0x0000000f -#define regk_ddr2_s2Gb 0x00000027 -#define regk_ddr2_s4Gb 0x00000042 -#define regk_ddr2_s512Mb 0x00000015 -#define regk_ddr2_temp0_85 0x00000618 -#define regk_ddr2_temp85_95 0x0000030c -#define regk_ddr2_term150 0x00000002 -#define regk_ddr2_term50 0x00000003 -#define regk_ddr2_term75 0x00000001 -#define regk_ddr2_test 0x00000080 -#define regk_ddr2_weak 0x00000000 -#define regk_ddr2_wr2 0x00000200 -#define regk_ddr2_wr3 0x00000400 -#define regk_ddr2_yes 0x00000001 -#endif /* __ddr2_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/gio_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/gio_defs_asm.h deleted file mode 100644 index df6714fda179..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/gio_defs_asm.h +++ /dev/null @@ -1,849 +0,0 @@ -#ifndef __gio_defs_asm_h -#define __gio_defs_asm_h - -/* - * This file is autogenerated from - * file: gio.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile gio_defs_asm.h gio.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register r_pa_din, scope gio, type r */ -#define reg_gio_r_pa_din___data___lsb 0 -#define reg_gio_r_pa_din___data___width 32 -#define reg_gio_r_pa_din_offset 0 - -/* Register rw_pa_dout, scope gio, type rw */ -#define reg_gio_rw_pa_dout___data___lsb 0 -#define reg_gio_rw_pa_dout___data___width 32 -#define reg_gio_rw_pa_dout_offset 4 - -/* Register rw_pa_oe, scope gio, type rw */ -#define reg_gio_rw_pa_oe___oe___lsb 0 -#define reg_gio_rw_pa_oe___oe___width 32 -#define reg_gio_rw_pa_oe_offset 8 - -/* Register rw_pa_byte0_dout, scope gio, type rw */ -#define reg_gio_rw_pa_byte0_dout___data___lsb 0 -#define reg_gio_rw_pa_byte0_dout___data___width 8 -#define reg_gio_rw_pa_byte0_dout_offset 12 - -/* Register rw_pa_byte0_oe, scope gio, type rw */ -#define reg_gio_rw_pa_byte0_oe___oe___lsb 0 -#define reg_gio_rw_pa_byte0_oe___oe___width 8 -#define reg_gio_rw_pa_byte0_oe_offset 16 - -/* Register rw_pa_byte1_dout, scope gio, type rw */ -#define reg_gio_rw_pa_byte1_dout___data___lsb 0 -#define reg_gio_rw_pa_byte1_dout___data___width 8 -#define reg_gio_rw_pa_byte1_dout_offset 20 - -/* Register rw_pa_byte1_oe, scope gio, type rw */ -#define reg_gio_rw_pa_byte1_oe___oe___lsb 0 -#define reg_gio_rw_pa_byte1_oe___oe___width 8 -#define reg_gio_rw_pa_byte1_oe_offset 24 - -/* Register rw_pa_byte2_dout, scope gio, type rw */ -#define reg_gio_rw_pa_byte2_dout___data___lsb 0 -#define reg_gio_rw_pa_byte2_dout___data___width 8 -#define reg_gio_rw_pa_byte2_dout_offset 28 - -/* Register rw_pa_byte2_oe, scope gio, type rw */ -#define reg_gio_rw_pa_byte2_oe___oe___lsb 0 -#define reg_gio_rw_pa_byte2_oe___oe___width 8 -#define reg_gio_rw_pa_byte2_oe_offset 32 - -/* Register rw_pa_byte3_dout, scope gio, type rw */ -#define reg_gio_rw_pa_byte3_dout___data___lsb 0 -#define reg_gio_rw_pa_byte3_dout___data___width 8 -#define reg_gio_rw_pa_byte3_dout_offset 36 - -/* Register rw_pa_byte3_oe, scope gio, type rw */ -#define reg_gio_rw_pa_byte3_oe___oe___lsb 0 -#define reg_gio_rw_pa_byte3_oe___oe___width 8 -#define reg_gio_rw_pa_byte3_oe_offset 40 - -/* Register r_pb_din, scope gio, type r */ -#define reg_gio_r_pb_din___data___lsb 0 -#define reg_gio_r_pb_din___data___width 32 -#define reg_gio_r_pb_din_offset 44 - -/* Register rw_pb_dout, scope gio, type rw */ -#define reg_gio_rw_pb_dout___data___lsb 0 -#define reg_gio_rw_pb_dout___data___width 32 -#define reg_gio_rw_pb_dout_offset 48 - -/* Register rw_pb_oe, scope gio, type rw */ -#define reg_gio_rw_pb_oe___oe___lsb 0 -#define reg_gio_rw_pb_oe___oe___width 32 -#define reg_gio_rw_pb_oe_offset 52 - -/* Register rw_pb_byte0_dout, scope gio, type rw */ -#define reg_gio_rw_pb_byte0_dout___data___lsb 0 -#define reg_gio_rw_pb_byte0_dout___data___width 8 -#define reg_gio_rw_pb_byte0_dout_offset 56 - -/* Register rw_pb_byte0_oe, scope gio, type rw */ -#define reg_gio_rw_pb_byte0_oe___oe___lsb 0 -#define reg_gio_rw_pb_byte0_oe___oe___width 8 -#define reg_gio_rw_pb_byte0_oe_offset 60 - -/* Register rw_pb_byte1_dout, scope gio, type rw */ -#define reg_gio_rw_pb_byte1_dout___data___lsb 0 -#define reg_gio_rw_pb_byte1_dout___data___width 8 -#define reg_gio_rw_pb_byte1_dout_offset 64 - -/* Register rw_pb_byte1_oe, scope gio, type rw */ -#define reg_gio_rw_pb_byte1_oe___oe___lsb 0 -#define reg_gio_rw_pb_byte1_oe___oe___width 8 -#define reg_gio_rw_pb_byte1_oe_offset 68 - -/* Register rw_pb_byte2_dout, scope gio, type rw */ -#define reg_gio_rw_pb_byte2_dout___data___lsb 0 -#define reg_gio_rw_pb_byte2_dout___data___width 8 -#define reg_gio_rw_pb_byte2_dout_offset 72 - -/* Register rw_pb_byte2_oe, scope gio, type rw */ -#define reg_gio_rw_pb_byte2_oe___oe___lsb 0 -#define reg_gio_rw_pb_byte2_oe___oe___width 8 -#define reg_gio_rw_pb_byte2_oe_offset 76 - -/* Register rw_pb_byte3_dout, scope gio, type rw */ -#define reg_gio_rw_pb_byte3_dout___data___lsb 0 -#define reg_gio_rw_pb_byte3_dout___data___width 8 -#define reg_gio_rw_pb_byte3_dout_offset 80 - -/* Register rw_pb_byte3_oe, scope gio, type rw */ -#define reg_gio_rw_pb_byte3_oe___oe___lsb 0 -#define reg_gio_rw_pb_byte3_oe___oe___width 8 -#define reg_gio_rw_pb_byte3_oe_offset 84 - -/* Register r_pc_din, scope gio, type r */ -#define reg_gio_r_pc_din___data___lsb 0 -#define reg_gio_r_pc_din___data___width 16 -#define reg_gio_r_pc_din_offset 88 - -/* Register rw_pc_dout, scope gio, type rw */ -#define reg_gio_rw_pc_dout___data___lsb 0 -#define reg_gio_rw_pc_dout___data___width 16 -#define reg_gio_rw_pc_dout_offset 92 - -/* Register rw_pc_oe, scope gio, type rw */ -#define reg_gio_rw_pc_oe___oe___lsb 0 -#define reg_gio_rw_pc_oe___oe___width 16 -#define reg_gio_rw_pc_oe_offset 96 - -/* Register rw_pc_byte0_dout, scope gio, type rw */ -#define reg_gio_rw_pc_byte0_dout___data___lsb 0 -#define reg_gio_rw_pc_byte0_dout___data___width 8 -#define reg_gio_rw_pc_byte0_dout_offset 100 - -/* Register rw_pc_byte0_oe, scope gio, type rw */ -#define reg_gio_rw_pc_byte0_oe___oe___lsb 0 -#define reg_gio_rw_pc_byte0_oe___oe___width 8 -#define reg_gio_rw_pc_byte0_oe_offset 104 - -/* Register rw_pc_byte1_dout, scope gio, type rw */ -#define reg_gio_rw_pc_byte1_dout___data___lsb 0 -#define reg_gio_rw_pc_byte1_dout___data___width 8 -#define reg_gio_rw_pc_byte1_dout_offset 108 - -/* Register rw_pc_byte1_oe, scope gio, type rw */ -#define reg_gio_rw_pc_byte1_oe___oe___lsb 0 -#define reg_gio_rw_pc_byte1_oe___oe___width 8 -#define reg_gio_rw_pc_byte1_oe_offset 112 - -/* Register r_pd_din, scope gio, type r */ -#define reg_gio_r_pd_din___data___lsb 0 -#define reg_gio_r_pd_din___data___width 32 -#define reg_gio_r_pd_din_offset 116 - -/* Register rw_intr_cfg, scope gio, type rw */ -#define reg_gio_rw_intr_cfg___intr0___lsb 0 -#define reg_gio_rw_intr_cfg___intr0___width 3 -#define reg_gio_rw_intr_cfg___intr1___lsb 3 -#define reg_gio_rw_intr_cfg___intr1___width 3 -#define reg_gio_rw_intr_cfg___intr2___lsb 6 -#define reg_gio_rw_intr_cfg___intr2___width 3 -#define reg_gio_rw_intr_cfg___intr3___lsb 9 -#define reg_gio_rw_intr_cfg___intr3___width 3 -#define reg_gio_rw_intr_cfg___intr4___lsb 12 -#define reg_gio_rw_intr_cfg___intr4___width 3 -#define reg_gio_rw_intr_cfg___intr5___lsb 15 -#define reg_gio_rw_intr_cfg___intr5___width 3 -#define reg_gio_rw_intr_cfg___intr6___lsb 18 -#define reg_gio_rw_intr_cfg___intr6___width 3 -#define reg_gio_rw_intr_cfg___intr7___lsb 21 -#define reg_gio_rw_intr_cfg___intr7___width 3 -#define reg_gio_rw_intr_cfg_offset 120 - -/* Register rw_intr_pins, scope gio, type rw */ -#define reg_gio_rw_intr_pins___intr0___lsb 0 -#define reg_gio_rw_intr_pins___intr0___width 4 -#define reg_gio_rw_intr_pins___intr1___lsb 4 -#define reg_gio_rw_intr_pins___intr1___width 4 -#define reg_gio_rw_intr_pins___intr2___lsb 8 -#define reg_gio_rw_intr_pins___intr2___width 4 -#define reg_gio_rw_intr_pins___intr3___lsb 12 -#define reg_gio_rw_intr_pins___intr3___width 4 -#define reg_gio_rw_intr_pins___intr4___lsb 16 -#define reg_gio_rw_intr_pins___intr4___width 4 -#define reg_gio_rw_intr_pins___intr5___lsb 20 -#define reg_gio_rw_intr_pins___intr5___width 4 -#define reg_gio_rw_intr_pins___intr6___lsb 24 -#define reg_gio_rw_intr_pins___intr6___width 4 -#define reg_gio_rw_intr_pins___intr7___lsb 28 -#define reg_gio_rw_intr_pins___intr7___width 4 -#define reg_gio_rw_intr_pins_offset 124 - -/* Register rw_intr_mask, scope gio, type rw */ -#define reg_gio_rw_intr_mask___intr0___lsb 0 -#define reg_gio_rw_intr_mask___intr0___width 1 -#define reg_gio_rw_intr_mask___intr0___bit 0 -#define reg_gio_rw_intr_mask___intr1___lsb 1 -#define reg_gio_rw_intr_mask___intr1___width 1 -#define reg_gio_rw_intr_mask___intr1___bit 1 -#define reg_gio_rw_intr_mask___intr2___lsb 2 -#define reg_gio_rw_intr_mask___intr2___width 1 -#define reg_gio_rw_intr_mask___intr2___bit 2 -#define reg_gio_rw_intr_mask___intr3___lsb 3 -#define reg_gio_rw_intr_mask___intr3___width 1 -#define reg_gio_rw_intr_mask___intr3___bit 3 -#define reg_gio_rw_intr_mask___intr4___lsb 4 -#define reg_gio_rw_intr_mask___intr4___width 1 -#define reg_gio_rw_intr_mask___intr4___bit 4 -#define reg_gio_rw_intr_mask___intr5___lsb 5 -#define reg_gio_rw_intr_mask___intr5___width 1 -#define reg_gio_rw_intr_mask___intr5___bit 5 -#define reg_gio_rw_intr_mask___intr6___lsb 6 -#define reg_gio_rw_intr_mask___intr6___width 1 -#define reg_gio_rw_intr_mask___intr6___bit 6 -#define reg_gio_rw_intr_mask___intr7___lsb 7 -#define reg_gio_rw_intr_mask___intr7___width 1 -#define reg_gio_rw_intr_mask___intr7___bit 7 -#define reg_gio_rw_intr_mask___i2c0_done___lsb 8 -#define reg_gio_rw_intr_mask___i2c0_done___width 1 -#define reg_gio_rw_intr_mask___i2c0_done___bit 8 -#define reg_gio_rw_intr_mask___i2c1_done___lsb 9 -#define reg_gio_rw_intr_mask___i2c1_done___width 1 -#define reg_gio_rw_intr_mask___i2c1_done___bit 9 -#define reg_gio_rw_intr_mask_offset 128 - -/* Register rw_ack_intr, scope gio, type rw */ -#define reg_gio_rw_ack_intr___intr0___lsb 0 -#define reg_gio_rw_ack_intr___intr0___width 1 -#define reg_gio_rw_ack_intr___intr0___bit 0 -#define reg_gio_rw_ack_intr___intr1___lsb 1 -#define reg_gio_rw_ack_intr___intr1___width 1 -#define reg_gio_rw_ack_intr___intr1___bit 1 -#define reg_gio_rw_ack_intr___intr2___lsb 2 -#define reg_gio_rw_ack_intr___intr2___width 1 -#define reg_gio_rw_ack_intr___intr2___bit 2 -#define reg_gio_rw_ack_intr___intr3___lsb 3 -#define reg_gio_rw_ack_intr___intr3___width 1 -#define reg_gio_rw_ack_intr___intr3___bit 3 -#define reg_gio_rw_ack_intr___intr4___lsb 4 -#define reg_gio_rw_ack_intr___intr4___width 1 -#define reg_gio_rw_ack_intr___intr4___bit 4 -#define reg_gio_rw_ack_intr___intr5___lsb 5 -#define reg_gio_rw_ack_intr___intr5___width 1 -#define reg_gio_rw_ack_intr___intr5___bit 5 -#define reg_gio_rw_ack_intr___intr6___lsb 6 -#define reg_gio_rw_ack_intr___intr6___width 1 -#define reg_gio_rw_ack_intr___intr6___bit 6 -#define reg_gio_rw_ack_intr___intr7___lsb 7 -#define reg_gio_rw_ack_intr___intr7___width 1 -#define reg_gio_rw_ack_intr___intr7___bit 7 -#define reg_gio_rw_ack_intr___i2c0_done___lsb 8 -#define reg_gio_rw_ack_intr___i2c0_done___width 1 -#define reg_gio_rw_ack_intr___i2c0_done___bit 8 -#define reg_gio_rw_ack_intr___i2c1_done___lsb 9 -#define reg_gio_rw_ack_intr___i2c1_done___width 1 -#define reg_gio_rw_ack_intr___i2c1_done___bit 9 -#define reg_gio_rw_ack_intr_offset 132 - -/* Register r_intr, scope gio, type r */ -#define reg_gio_r_intr___intr0___lsb 0 -#define reg_gio_r_intr___intr0___width 1 -#define reg_gio_r_intr___intr0___bit 0 -#define reg_gio_r_intr___intr1___lsb 1 -#define reg_gio_r_intr___intr1___width 1 -#define reg_gio_r_intr___intr1___bit 1 -#define reg_gio_r_intr___intr2___lsb 2 -#define reg_gio_r_intr___intr2___width 1 -#define reg_gio_r_intr___intr2___bit 2 -#define reg_gio_r_intr___intr3___lsb 3 -#define reg_gio_r_intr___intr3___width 1 -#define reg_gio_r_intr___intr3___bit 3 -#define reg_gio_r_intr___intr4___lsb 4 -#define reg_gio_r_intr___intr4___width 1 -#define reg_gio_r_intr___intr4___bit 4 -#define reg_gio_r_intr___intr5___lsb 5 -#define reg_gio_r_intr___intr5___width 1 -#define reg_gio_r_intr___intr5___bit 5 -#define reg_gio_r_intr___intr6___lsb 6 -#define reg_gio_r_intr___intr6___width 1 -#define reg_gio_r_intr___intr6___bit 6 -#define reg_gio_r_intr___intr7___lsb 7 -#define reg_gio_r_intr___intr7___width 1 -#define reg_gio_r_intr___intr7___bit 7 -#define reg_gio_r_intr___i2c0_done___lsb 8 -#define reg_gio_r_intr___i2c0_done___width 1 -#define reg_gio_r_intr___i2c0_done___bit 8 -#define reg_gio_r_intr___i2c1_done___lsb 9 -#define reg_gio_r_intr___i2c1_done___width 1 -#define reg_gio_r_intr___i2c1_done___bit 9 -#define reg_gio_r_intr_offset 136 - -/* Register r_masked_intr, scope gio, type r */ -#define reg_gio_r_masked_intr___intr0___lsb 0 -#define reg_gio_r_masked_intr___intr0___width 1 -#define reg_gio_r_masked_intr___intr0___bit 0 -#define reg_gio_r_masked_intr___intr1___lsb 1 -#define reg_gio_r_masked_intr___intr1___width 1 -#define reg_gio_r_masked_intr___intr1___bit 1 -#define reg_gio_r_masked_intr___intr2___lsb 2 -#define reg_gio_r_masked_intr___intr2___width 1 -#define reg_gio_r_masked_intr___intr2___bit 2 -#define reg_gio_r_masked_intr___intr3___lsb 3 -#define reg_gio_r_masked_intr___intr3___width 1 -#define reg_gio_r_masked_intr___intr3___bit 3 -#define reg_gio_r_masked_intr___intr4___lsb 4 -#define reg_gio_r_masked_intr___intr4___width 1 -#define reg_gio_r_masked_intr___intr4___bit 4 -#define reg_gio_r_masked_intr___intr5___lsb 5 -#define reg_gio_r_masked_intr___intr5___width 1 -#define reg_gio_r_masked_intr___intr5___bit 5 -#define reg_gio_r_masked_intr___intr6___lsb 6 -#define reg_gio_r_masked_intr___intr6___width 1 -#define reg_gio_r_masked_intr___intr6___bit 6 -#define reg_gio_r_masked_intr___intr7___lsb 7 -#define reg_gio_r_masked_intr___intr7___width 1 -#define reg_gio_r_masked_intr___intr7___bit 7 -#define reg_gio_r_masked_intr___i2c0_done___lsb 8 -#define reg_gio_r_masked_intr___i2c0_done___width 1 -#define reg_gio_r_masked_intr___i2c0_done___bit 8 -#define reg_gio_r_masked_intr___i2c1_done___lsb 9 -#define reg_gio_r_masked_intr___i2c1_done___width 1 -#define reg_gio_r_masked_intr___i2c1_done___bit 9 -#define reg_gio_r_masked_intr_offset 140 - -/* Register rw_i2c0_start, scope gio, type rw */ -#define reg_gio_rw_i2c0_start___run___lsb 0 -#define reg_gio_rw_i2c0_start___run___width 1 -#define reg_gio_rw_i2c0_start___run___bit 0 -#define reg_gio_rw_i2c0_start_offset 144 - -/* Register rw_i2c0_cfg, scope gio, type rw */ -#define reg_gio_rw_i2c0_cfg___en___lsb 0 -#define reg_gio_rw_i2c0_cfg___en___width 1 -#define reg_gio_rw_i2c0_cfg___en___bit 0 -#define reg_gio_rw_i2c0_cfg___bit_order___lsb 1 -#define reg_gio_rw_i2c0_cfg___bit_order___width 1 -#define reg_gio_rw_i2c0_cfg___bit_order___bit 1 -#define reg_gio_rw_i2c0_cfg___scl_io___lsb 2 -#define reg_gio_rw_i2c0_cfg___scl_io___width 1 -#define reg_gio_rw_i2c0_cfg___scl_io___bit 2 -#define reg_gio_rw_i2c0_cfg___scl_inv___lsb 3 -#define reg_gio_rw_i2c0_cfg___scl_inv___width 1 -#define reg_gio_rw_i2c0_cfg___scl_inv___bit 3 -#define reg_gio_rw_i2c0_cfg___sda_io___lsb 4 -#define reg_gio_rw_i2c0_cfg___sda_io___width 1 -#define reg_gio_rw_i2c0_cfg___sda_io___bit 4 -#define reg_gio_rw_i2c0_cfg___sda_idle___lsb 5 -#define reg_gio_rw_i2c0_cfg___sda_idle___width 1 -#define reg_gio_rw_i2c0_cfg___sda_idle___bit 5 -#define reg_gio_rw_i2c0_cfg_offset 148 - -/* Register rw_i2c0_ctrl, scope gio, type rw */ -#define reg_gio_rw_i2c0_ctrl___trf_bits___lsb 0 -#define reg_gio_rw_i2c0_ctrl___trf_bits___width 6 -#define reg_gio_rw_i2c0_ctrl___switch_dir___lsb 6 -#define reg_gio_rw_i2c0_ctrl___switch_dir___width 6 -#define reg_gio_rw_i2c0_ctrl___extra_start___lsb 12 -#define reg_gio_rw_i2c0_ctrl___extra_start___width 3 -#define reg_gio_rw_i2c0_ctrl___early_end___lsb 15 -#define reg_gio_rw_i2c0_ctrl___early_end___width 1 -#define reg_gio_rw_i2c0_ctrl___early_end___bit 15 -#define reg_gio_rw_i2c0_ctrl___start_stop___lsb 16 -#define reg_gio_rw_i2c0_ctrl___start_stop___width 1 -#define reg_gio_rw_i2c0_ctrl___start_stop___bit 16 -#define reg_gio_rw_i2c0_ctrl___ack_dir0___lsb 17 -#define reg_gio_rw_i2c0_ctrl___ack_dir0___width 1 -#define reg_gio_rw_i2c0_ctrl___ack_dir0___bit 17 -#define reg_gio_rw_i2c0_ctrl___ack_dir1___lsb 18 -#define reg_gio_rw_i2c0_ctrl___ack_dir1___width 1 -#define reg_gio_rw_i2c0_ctrl___ack_dir1___bit 18 -#define reg_gio_rw_i2c0_ctrl___ack_dir2___lsb 19 -#define reg_gio_rw_i2c0_ctrl___ack_dir2___width 1 -#define reg_gio_rw_i2c0_ctrl___ack_dir2___bit 19 -#define reg_gio_rw_i2c0_ctrl___ack_dir3___lsb 20 -#define reg_gio_rw_i2c0_ctrl___ack_dir3___width 1 -#define reg_gio_rw_i2c0_ctrl___ack_dir3___bit 20 -#define reg_gio_rw_i2c0_ctrl___ack_dir4___lsb 21 -#define reg_gio_rw_i2c0_ctrl___ack_dir4___width 1 -#define reg_gio_rw_i2c0_ctrl___ack_dir4___bit 21 -#define reg_gio_rw_i2c0_ctrl___ack_dir5___lsb 22 -#define reg_gio_rw_i2c0_ctrl___ack_dir5___width 1 -#define reg_gio_rw_i2c0_ctrl___ack_dir5___bit 22 -#define reg_gio_rw_i2c0_ctrl___ack_bit___lsb 23 -#define reg_gio_rw_i2c0_ctrl___ack_bit___width 1 -#define reg_gio_rw_i2c0_ctrl___ack_bit___bit 23 -#define reg_gio_rw_i2c0_ctrl___start_bit___lsb 24 -#define reg_gio_rw_i2c0_ctrl___start_bit___width 1 -#define reg_gio_rw_i2c0_ctrl___start_bit___bit 24 -#define reg_gio_rw_i2c0_ctrl___freq___lsb 25 -#define reg_gio_rw_i2c0_ctrl___freq___width 2 -#define reg_gio_rw_i2c0_ctrl_offset 152 - -/* Register rw_i2c0_data, scope gio, type rw */ -#define reg_gio_rw_i2c0_data___data0___lsb 0 -#define reg_gio_rw_i2c0_data___data0___width 8 -#define reg_gio_rw_i2c0_data___data1___lsb 8 -#define reg_gio_rw_i2c0_data___data1___width 8 -#define reg_gio_rw_i2c0_data___data2___lsb 16 -#define reg_gio_rw_i2c0_data___data2___width 8 -#define reg_gio_rw_i2c0_data___data3___lsb 24 -#define reg_gio_rw_i2c0_data___data3___width 8 -#define reg_gio_rw_i2c0_data_offset 156 - -/* Register rw_i2c0_data2, scope gio, type rw */ -#define reg_gio_rw_i2c0_data2___data4___lsb 0 -#define reg_gio_rw_i2c0_data2___data4___width 8 -#define reg_gio_rw_i2c0_data2___data5___lsb 8 -#define reg_gio_rw_i2c0_data2___data5___width 8 -#define reg_gio_rw_i2c0_data2___start_val___lsb 16 -#define reg_gio_rw_i2c0_data2___start_val___width 6 -#define reg_gio_rw_i2c0_data2___ack_val___lsb 22 -#define reg_gio_rw_i2c0_data2___ack_val___width 6 -#define reg_gio_rw_i2c0_data2_offset 160 - -/* Register rw_i2c1_start, scope gio, type rw */ -#define reg_gio_rw_i2c1_start___run___lsb 0 -#define reg_gio_rw_i2c1_start___run___width 1 -#define reg_gio_rw_i2c1_start___run___bit 0 -#define reg_gio_rw_i2c1_start_offset 164 - -/* Register rw_i2c1_cfg, scope gio, type rw */ -#define reg_gio_rw_i2c1_cfg___en___lsb 0 -#define reg_gio_rw_i2c1_cfg___en___width 1 -#define reg_gio_rw_i2c1_cfg___en___bit 0 -#define reg_gio_rw_i2c1_cfg___bit_order___lsb 1 -#define reg_gio_rw_i2c1_cfg___bit_order___width 1 -#define reg_gio_rw_i2c1_cfg___bit_order___bit 1 -#define reg_gio_rw_i2c1_cfg___scl_io___lsb 2 -#define reg_gio_rw_i2c1_cfg___scl_io___width 1 -#define reg_gio_rw_i2c1_cfg___scl_io___bit 2 -#define reg_gio_rw_i2c1_cfg___scl_inv___lsb 3 -#define reg_gio_rw_i2c1_cfg___scl_inv___width 1 -#define reg_gio_rw_i2c1_cfg___scl_inv___bit 3 -#define reg_gio_rw_i2c1_cfg___sda0_io___lsb 4 -#define reg_gio_rw_i2c1_cfg___sda0_io___width 1 -#define reg_gio_rw_i2c1_cfg___sda0_io___bit 4 -#define reg_gio_rw_i2c1_cfg___sda0_idle___lsb 5 -#define reg_gio_rw_i2c1_cfg___sda0_idle___width 1 -#define reg_gio_rw_i2c1_cfg___sda0_idle___bit 5 -#define reg_gio_rw_i2c1_cfg___sda1_io___lsb 6 -#define reg_gio_rw_i2c1_cfg___sda1_io___width 1 -#define reg_gio_rw_i2c1_cfg___sda1_io___bit 6 -#define reg_gio_rw_i2c1_cfg___sda1_idle___lsb 7 -#define reg_gio_rw_i2c1_cfg___sda1_idle___width 1 -#define reg_gio_rw_i2c1_cfg___sda1_idle___bit 7 -#define reg_gio_rw_i2c1_cfg___sda2_io___lsb 8 -#define reg_gio_rw_i2c1_cfg___sda2_io___width 1 -#define reg_gio_rw_i2c1_cfg___sda2_io___bit 8 -#define reg_gio_rw_i2c1_cfg___sda2_idle___lsb 9 -#define reg_gio_rw_i2c1_cfg___sda2_idle___width 1 -#define reg_gio_rw_i2c1_cfg___sda2_idle___bit 9 -#define reg_gio_rw_i2c1_cfg___sda3_io___lsb 10 -#define reg_gio_rw_i2c1_cfg___sda3_io___width 1 -#define reg_gio_rw_i2c1_cfg___sda3_io___bit 10 -#define reg_gio_rw_i2c1_cfg___sda3_idle___lsb 11 -#define reg_gio_rw_i2c1_cfg___sda3_idle___width 1 -#define reg_gio_rw_i2c1_cfg___sda3_idle___bit 11 -#define reg_gio_rw_i2c1_cfg___sda_sel___lsb 12 -#define reg_gio_rw_i2c1_cfg___sda_sel___width 2 -#define reg_gio_rw_i2c1_cfg___sen_idle___lsb 14 -#define reg_gio_rw_i2c1_cfg___sen_idle___width 1 -#define reg_gio_rw_i2c1_cfg___sen_idle___bit 14 -#define reg_gio_rw_i2c1_cfg___sen_inv___lsb 15 -#define reg_gio_rw_i2c1_cfg___sen_inv___width 1 -#define reg_gio_rw_i2c1_cfg___sen_inv___bit 15 -#define reg_gio_rw_i2c1_cfg___sen_sel___lsb 16 -#define reg_gio_rw_i2c1_cfg___sen_sel___width 2 -#define reg_gio_rw_i2c1_cfg_offset 168 - -/* Register rw_i2c1_ctrl, scope gio, type rw */ -#define reg_gio_rw_i2c1_ctrl___trf_bits___lsb 0 -#define reg_gio_rw_i2c1_ctrl___trf_bits___width 6 -#define reg_gio_rw_i2c1_ctrl___switch_dir___lsb 6 -#define reg_gio_rw_i2c1_ctrl___switch_dir___width 6 -#define reg_gio_rw_i2c1_ctrl___extra_start___lsb 12 -#define reg_gio_rw_i2c1_ctrl___extra_start___width 3 -#define reg_gio_rw_i2c1_ctrl___early_end___lsb 15 -#define reg_gio_rw_i2c1_ctrl___early_end___width 1 -#define reg_gio_rw_i2c1_ctrl___early_end___bit 15 -#define reg_gio_rw_i2c1_ctrl___start_stop___lsb 16 -#define reg_gio_rw_i2c1_ctrl___start_stop___width 1 -#define reg_gio_rw_i2c1_ctrl___start_stop___bit 16 -#define reg_gio_rw_i2c1_ctrl___ack_dir0___lsb 17 -#define reg_gio_rw_i2c1_ctrl___ack_dir0___width 1 -#define reg_gio_rw_i2c1_ctrl___ack_dir0___bit 17 -#define reg_gio_rw_i2c1_ctrl___ack_dir1___lsb 18 -#define reg_gio_rw_i2c1_ctrl___ack_dir1___width 1 -#define reg_gio_rw_i2c1_ctrl___ack_dir1___bit 18 -#define reg_gio_rw_i2c1_ctrl___ack_dir2___lsb 19 -#define reg_gio_rw_i2c1_ctrl___ack_dir2___width 1 -#define reg_gio_rw_i2c1_ctrl___ack_dir2___bit 19 -#define reg_gio_rw_i2c1_ctrl___ack_dir3___lsb 20 -#define reg_gio_rw_i2c1_ctrl___ack_dir3___width 1 -#define reg_gio_rw_i2c1_ctrl___ack_dir3___bit 20 -#define reg_gio_rw_i2c1_ctrl___ack_dir4___lsb 21 -#define reg_gio_rw_i2c1_ctrl___ack_dir4___width 1 -#define reg_gio_rw_i2c1_ctrl___ack_dir4___bit 21 -#define reg_gio_rw_i2c1_ctrl___ack_dir5___lsb 22 -#define reg_gio_rw_i2c1_ctrl___ack_dir5___width 1 -#define reg_gio_rw_i2c1_ctrl___ack_dir5___bit 22 -#define reg_gio_rw_i2c1_ctrl___ack_bit___lsb 23 -#define reg_gio_rw_i2c1_ctrl___ack_bit___width 1 -#define reg_gio_rw_i2c1_ctrl___ack_bit___bit 23 -#define reg_gio_rw_i2c1_ctrl___start_bit___lsb 24 -#define reg_gio_rw_i2c1_ctrl___start_bit___width 1 -#define reg_gio_rw_i2c1_ctrl___start_bit___bit 24 -#define reg_gio_rw_i2c1_ctrl___freq___lsb 25 -#define reg_gio_rw_i2c1_ctrl___freq___width 2 -#define reg_gio_rw_i2c1_ctrl_offset 172 - -/* Register rw_i2c1_data, scope gio, type rw */ -#define reg_gio_rw_i2c1_data___data0___lsb 0 -#define reg_gio_rw_i2c1_data___data0___width 8 -#define reg_gio_rw_i2c1_data___data1___lsb 8 -#define reg_gio_rw_i2c1_data___data1___width 8 -#define reg_gio_rw_i2c1_data___data2___lsb 16 -#define reg_gio_rw_i2c1_data___data2___width 8 -#define reg_gio_rw_i2c1_data___data3___lsb 24 -#define reg_gio_rw_i2c1_data___data3___width 8 -#define reg_gio_rw_i2c1_data_offset 176 - -/* Register rw_i2c1_data2, scope gio, type rw */ -#define reg_gio_rw_i2c1_data2___data4___lsb 0 -#define reg_gio_rw_i2c1_data2___data4___width 8 -#define reg_gio_rw_i2c1_data2___data5___lsb 8 -#define reg_gio_rw_i2c1_data2___data5___width 8 -#define reg_gio_rw_i2c1_data2___start_val___lsb 16 -#define reg_gio_rw_i2c1_data2___start_val___width 6 -#define reg_gio_rw_i2c1_data2___ack_val___lsb 22 -#define reg_gio_rw_i2c1_data2___ack_val___width 6 -#define reg_gio_rw_i2c1_data2_offset 180 - -/* Register r_ppwm_stat, scope gio, type r */ -#define reg_gio_r_ppwm_stat___freq___lsb 0 -#define reg_gio_r_ppwm_stat___freq___width 2 -#define reg_gio_r_ppwm_stat_offset 184 - -/* Register rw_ppwm_data, scope gio, type rw */ -#define reg_gio_rw_ppwm_data___data___lsb 0 -#define reg_gio_rw_ppwm_data___data___width 8 -#define reg_gio_rw_ppwm_data_offset 188 - -/* Register rw_pwm0_ctrl, scope gio, type rw */ -#define reg_gio_rw_pwm0_ctrl___mode___lsb 0 -#define reg_gio_rw_pwm0_ctrl___mode___width 2 -#define reg_gio_rw_pwm0_ctrl___ccd_override___lsb 2 -#define reg_gio_rw_pwm0_ctrl___ccd_override___width 1 -#define reg_gio_rw_pwm0_ctrl___ccd_override___bit 2 -#define reg_gio_rw_pwm0_ctrl___ccd_val___lsb 3 -#define reg_gio_rw_pwm0_ctrl___ccd_val___width 1 -#define reg_gio_rw_pwm0_ctrl___ccd_val___bit 3 -#define reg_gio_rw_pwm0_ctrl_offset 192 - -/* Register rw_pwm0_var, scope gio, type rw */ -#define reg_gio_rw_pwm0_var___lo___lsb 0 -#define reg_gio_rw_pwm0_var___lo___width 13 -#define reg_gio_rw_pwm0_var___hi___lsb 13 -#define reg_gio_rw_pwm0_var___hi___width 13 -#define reg_gio_rw_pwm0_var_offset 196 - -/* Register rw_pwm0_data, scope gio, type rw */ -#define reg_gio_rw_pwm0_data___data___lsb 0 -#define reg_gio_rw_pwm0_data___data___width 8 -#define reg_gio_rw_pwm0_data_offset 200 - -/* Register rw_pwm1_ctrl, scope gio, type rw */ -#define reg_gio_rw_pwm1_ctrl___mode___lsb 0 -#define reg_gio_rw_pwm1_ctrl___mode___width 2 -#define reg_gio_rw_pwm1_ctrl___ccd_override___lsb 2 -#define reg_gio_rw_pwm1_ctrl___ccd_override___width 1 -#define reg_gio_rw_pwm1_ctrl___ccd_override___bit 2 -#define reg_gio_rw_pwm1_ctrl___ccd_val___lsb 3 -#define reg_gio_rw_pwm1_ctrl___ccd_val___width 1 -#define reg_gio_rw_pwm1_ctrl___ccd_val___bit 3 -#define reg_gio_rw_pwm1_ctrl_offset 204 - -/* Register rw_pwm1_var, scope gio, type rw */ -#define reg_gio_rw_pwm1_var___lo___lsb 0 -#define reg_gio_rw_pwm1_var___lo___width 13 -#define reg_gio_rw_pwm1_var___hi___lsb 13 -#define reg_gio_rw_pwm1_var___hi___width 13 -#define reg_gio_rw_pwm1_var_offset 208 - -/* Register rw_pwm1_data, scope gio, type rw */ -#define reg_gio_rw_pwm1_data___data___lsb 0 -#define reg_gio_rw_pwm1_data___data___width 8 -#define reg_gio_rw_pwm1_data_offset 212 - -/* Register rw_pwm2_ctrl, scope gio, type rw */ -#define reg_gio_rw_pwm2_ctrl___mode___lsb 0 -#define reg_gio_rw_pwm2_ctrl___mode___width 2 -#define reg_gio_rw_pwm2_ctrl___ccd_override___lsb 2 -#define reg_gio_rw_pwm2_ctrl___ccd_override___width 1 -#define reg_gio_rw_pwm2_ctrl___ccd_override___bit 2 -#define reg_gio_rw_pwm2_ctrl___ccd_val___lsb 3 -#define reg_gio_rw_pwm2_ctrl___ccd_val___width 1 -#define reg_gio_rw_pwm2_ctrl___ccd_val___bit 3 -#define reg_gio_rw_pwm2_ctrl_offset 216 - -/* Register rw_pwm2_var, scope gio, type rw */ -#define reg_gio_rw_pwm2_var___lo___lsb 0 -#define reg_gio_rw_pwm2_var___lo___width 13 -#define reg_gio_rw_pwm2_var___hi___lsb 13 -#define reg_gio_rw_pwm2_var___hi___width 13 -#define reg_gio_rw_pwm2_var_offset 220 - -/* Register rw_pwm2_data, scope gio, type rw */ -#define reg_gio_rw_pwm2_data___data___lsb 0 -#define reg_gio_rw_pwm2_data___data___width 8 -#define reg_gio_rw_pwm2_data_offset 224 - -/* Register rw_pwm_in_cfg, scope gio, type rw */ -#define reg_gio_rw_pwm_in_cfg___pin___lsb 0 -#define reg_gio_rw_pwm_in_cfg___pin___width 3 -#define reg_gio_rw_pwm_in_cfg_offset 228 - -/* Register r_pwm_in_lo, scope gio, type r */ -#define reg_gio_r_pwm_in_lo___data___lsb 0 -#define reg_gio_r_pwm_in_lo___data___width 32 -#define reg_gio_r_pwm_in_lo_offset 232 - -/* Register r_pwm_in_hi, scope gio, type r */ -#define reg_gio_r_pwm_in_hi___data___lsb 0 -#define reg_gio_r_pwm_in_hi___data___width 32 -#define reg_gio_r_pwm_in_hi_offset 236 - -/* Register r_pwm_in_cnt, scope gio, type r */ -#define reg_gio_r_pwm_in_cnt___data___lsb 0 -#define reg_gio_r_pwm_in_cnt___data___width 32 -#define reg_gio_r_pwm_in_cnt_offset 240 - - -/* Constants */ -#define regk_gio_anyedge 0x00000007 -#define regk_gio_f100k 0x00000000 -#define regk_gio_f1562 0x00000000 -#define regk_gio_f195 0x00000003 -#define regk_gio_f1m 0x00000002 -#define regk_gio_f390 0x00000002 -#define regk_gio_f400k 0x00000001 -#define regk_gio_f5m 0x00000003 -#define regk_gio_f781 0x00000001 -#define regk_gio_hi 0x00000001 -#define regk_gio_in 0x00000000 -#define regk_gio_intr_pa0 0x00000000 -#define regk_gio_intr_pa1 0x00000000 -#define regk_gio_intr_pa10 0x00000001 -#define regk_gio_intr_pa11 0x00000001 -#define regk_gio_intr_pa12 0x00000001 -#define regk_gio_intr_pa13 0x00000001 -#define regk_gio_intr_pa14 0x00000001 -#define regk_gio_intr_pa15 0x00000001 -#define regk_gio_intr_pa16 0x00000002 -#define regk_gio_intr_pa17 0x00000002 -#define regk_gio_intr_pa18 0x00000002 -#define regk_gio_intr_pa19 0x00000002 -#define regk_gio_intr_pa2 0x00000000 -#define regk_gio_intr_pa20 0x00000002 -#define regk_gio_intr_pa21 0x00000002 -#define regk_gio_intr_pa22 0x00000002 -#define regk_gio_intr_pa23 0x00000002 -#define regk_gio_intr_pa24 0x00000003 -#define regk_gio_intr_pa25 0x00000003 -#define regk_gio_intr_pa26 0x00000003 -#define regk_gio_intr_pa27 0x00000003 -#define regk_gio_intr_pa28 0x00000003 -#define regk_gio_intr_pa29 0x00000003 -#define regk_gio_intr_pa3 0x00000000 -#define regk_gio_intr_pa30 0x00000003 -#define regk_gio_intr_pa31 0x00000003 -#define regk_gio_intr_pa4 0x00000000 -#define regk_gio_intr_pa5 0x00000000 -#define regk_gio_intr_pa6 0x00000000 -#define regk_gio_intr_pa7 0x00000000 -#define regk_gio_intr_pa8 0x00000001 -#define regk_gio_intr_pa9 0x00000001 -#define regk_gio_intr_pb0 0x00000004 -#define regk_gio_intr_pb1 0x00000004 -#define regk_gio_intr_pb10 0x00000005 -#define regk_gio_intr_pb11 0x00000005 -#define regk_gio_intr_pb12 0x00000005 -#define regk_gio_intr_pb13 0x00000005 -#define regk_gio_intr_pb14 0x00000005 -#define regk_gio_intr_pb15 0x00000005 -#define regk_gio_intr_pb16 0x00000006 -#define regk_gio_intr_pb17 0x00000006 -#define regk_gio_intr_pb18 0x00000006 -#define regk_gio_intr_pb19 0x00000006 -#define regk_gio_intr_pb2 0x00000004 -#define regk_gio_intr_pb20 0x00000006 -#define regk_gio_intr_pb21 0x00000006 -#define regk_gio_intr_pb22 0x00000006 -#define regk_gio_intr_pb23 0x00000006 -#define regk_gio_intr_pb24 0x00000007 -#define regk_gio_intr_pb25 0x00000007 -#define regk_gio_intr_pb26 0x00000007 -#define regk_gio_intr_pb27 0x00000007 -#define regk_gio_intr_pb28 0x00000007 -#define regk_gio_intr_pb29 0x00000007 -#define regk_gio_intr_pb3 0x00000004 -#define regk_gio_intr_pb30 0x00000007 -#define regk_gio_intr_pb31 0x00000007 -#define regk_gio_intr_pb4 0x00000004 -#define regk_gio_intr_pb5 0x00000004 -#define regk_gio_intr_pb6 0x00000004 -#define regk_gio_intr_pb7 0x00000004 -#define regk_gio_intr_pb8 0x00000005 -#define regk_gio_intr_pb9 0x00000005 -#define regk_gio_intr_pc0 0x00000008 -#define regk_gio_intr_pc1 0x00000008 -#define regk_gio_intr_pc10 0x00000009 -#define regk_gio_intr_pc11 0x00000009 -#define regk_gio_intr_pc12 0x00000009 -#define regk_gio_intr_pc13 0x00000009 -#define regk_gio_intr_pc14 0x00000009 -#define regk_gio_intr_pc15 0x00000009 -#define regk_gio_intr_pc2 0x00000008 -#define regk_gio_intr_pc3 0x00000008 -#define regk_gio_intr_pc4 0x00000008 -#define regk_gio_intr_pc5 0x00000008 -#define regk_gio_intr_pc6 0x00000008 -#define regk_gio_intr_pc7 0x00000008 -#define regk_gio_intr_pc8 0x00000009 -#define regk_gio_intr_pc9 0x00000009 -#define regk_gio_intr_pd0 0x0000000c -#define regk_gio_intr_pd1 0x0000000c -#define regk_gio_intr_pd10 0x0000000d -#define regk_gio_intr_pd11 0x0000000d -#define regk_gio_intr_pd12 0x0000000d -#define regk_gio_intr_pd13 0x0000000d -#define regk_gio_intr_pd14 0x0000000d -#define regk_gio_intr_pd15 0x0000000d -#define regk_gio_intr_pd16 0x0000000e -#define regk_gio_intr_pd17 0x0000000e -#define regk_gio_intr_pd18 0x0000000e -#define regk_gio_intr_pd19 0x0000000e -#define regk_gio_intr_pd2 0x0000000c -#define regk_gio_intr_pd20 0x0000000e -#define regk_gio_intr_pd21 0x0000000e -#define regk_gio_intr_pd22 0x0000000e -#define regk_gio_intr_pd23 0x0000000e -#define regk_gio_intr_pd24 0x0000000f -#define regk_gio_intr_pd25 0x0000000f -#define regk_gio_intr_pd26 0x0000000f -#define regk_gio_intr_pd27 0x0000000f -#define regk_gio_intr_pd28 0x0000000f -#define regk_gio_intr_pd29 0x0000000f -#define regk_gio_intr_pd3 0x0000000c -#define regk_gio_intr_pd30 0x0000000f -#define regk_gio_intr_pd31 0x0000000f -#define regk_gio_intr_pd4 0x0000000c -#define regk_gio_intr_pd5 0x0000000c -#define regk_gio_intr_pd6 0x0000000c -#define regk_gio_intr_pd7 0x0000000c -#define regk_gio_intr_pd8 0x0000000d -#define regk_gio_intr_pd9 0x0000000d -#define regk_gio_lo 0x00000002 -#define regk_gio_lsb 0x00000000 -#define regk_gio_msb 0x00000001 -#define regk_gio_negedge 0x00000006 -#define regk_gio_no 0x00000000 -#define regk_gio_no_switch 0x0000003f -#define regk_gio_none 0x00000007 -#define regk_gio_off 0x00000000 -#define regk_gio_opendrain 0x00000000 -#define regk_gio_out 0x00000001 -#define regk_gio_posedge 0x00000005 -#define regk_gio_pwm_hfp 0x00000002 -#define regk_gio_pwm_pa0 0x00000001 -#define regk_gio_pwm_pa19 0x00000004 -#define regk_gio_pwm_pa6 0x00000002 -#define regk_gio_pwm_pa7 0x00000003 -#define regk_gio_pwm_pb26 0x00000005 -#define regk_gio_pwm_pd23 0x00000006 -#define regk_gio_pwm_pd31 0x00000007 -#define regk_gio_pwm_std 0x00000001 -#define regk_gio_pwm_var 0x00000003 -#define regk_gio_rw_i2c0_cfg_default 0x00000020 -#define regk_gio_rw_i2c0_ctrl_default 0x00010000 -#define regk_gio_rw_i2c0_start_default 0x00000000 -#define regk_gio_rw_i2c1_cfg_default 0x00000aa0 -#define regk_gio_rw_i2c1_ctrl_default 0x00010000 -#define regk_gio_rw_i2c1_start_default 0x00000000 -#define regk_gio_rw_intr_cfg_default 0x00000000 -#define regk_gio_rw_intr_mask_default 0x00000000 -#define regk_gio_rw_pa_oe_default 0x00000000 -#define regk_gio_rw_pb_oe_default 0x00000000 -#define regk_gio_rw_pc_oe_default 0x00000000 -#define regk_gio_rw_ppwm_data_default 0x00000000 -#define regk_gio_rw_pwm0_ctrl_default 0x00000000 -#define regk_gio_rw_pwm1_ctrl_default 0x00000000 -#define regk_gio_rw_pwm2_ctrl_default 0x00000000 -#define regk_gio_rw_pwm_in_cfg_default 0x00000000 -#define regk_gio_sda0 0x00000000 -#define regk_gio_sda1 0x00000001 -#define regk_gio_sda2 0x00000002 -#define regk_gio_sda3 0x00000003 -#define regk_gio_sen 0x00000000 -#define regk_gio_set 0x00000003 -#define regk_gio_yes 0x00000001 -#endif /* __gio_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pinmux_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pinmux_defs_asm.h deleted file mode 100644 index c3dc9c666c46..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pinmux_defs_asm.h +++ /dev/null @@ -1,572 +0,0 @@ -#ifndef __pinmux_defs_asm_h -#define __pinmux_defs_asm_h - -/* - * This file is autogenerated from - * file: pinmux.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile pinmux_defs_asm.h pinmux.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_hwprot, scope pinmux, type rw */ -#define reg_pinmux_rw_hwprot___eth___lsb 0 -#define reg_pinmux_rw_hwprot___eth___width 1 -#define reg_pinmux_rw_hwprot___eth___bit 0 -#define reg_pinmux_rw_hwprot___eth_mdio___lsb 1 -#define reg_pinmux_rw_hwprot___eth_mdio___width 1 -#define reg_pinmux_rw_hwprot___eth_mdio___bit 1 -#define reg_pinmux_rw_hwprot___geth___lsb 2 -#define reg_pinmux_rw_hwprot___geth___width 1 -#define reg_pinmux_rw_hwprot___geth___bit 2 -#define reg_pinmux_rw_hwprot___tg___lsb 3 -#define reg_pinmux_rw_hwprot___tg___width 1 -#define reg_pinmux_rw_hwprot___tg___bit 3 -#define reg_pinmux_rw_hwprot___tg_clk___lsb 4 -#define reg_pinmux_rw_hwprot___tg_clk___width 1 -#define reg_pinmux_rw_hwprot___tg_clk___bit 4 -#define reg_pinmux_rw_hwprot___vout___lsb 5 -#define reg_pinmux_rw_hwprot___vout___width 1 -#define reg_pinmux_rw_hwprot___vout___bit 5 -#define reg_pinmux_rw_hwprot___vout_sync___lsb 6 -#define reg_pinmux_rw_hwprot___vout_sync___width 1 -#define reg_pinmux_rw_hwprot___vout_sync___bit 6 -#define reg_pinmux_rw_hwprot___ser1___lsb 7 -#define reg_pinmux_rw_hwprot___ser1___width 1 -#define reg_pinmux_rw_hwprot___ser1___bit 7 -#define reg_pinmux_rw_hwprot___ser2___lsb 8 -#define reg_pinmux_rw_hwprot___ser2___width 1 -#define reg_pinmux_rw_hwprot___ser2___bit 8 -#define reg_pinmux_rw_hwprot___ser3___lsb 9 -#define reg_pinmux_rw_hwprot___ser3___width 1 -#define reg_pinmux_rw_hwprot___ser3___bit 9 -#define reg_pinmux_rw_hwprot___ser4___lsb 10 -#define reg_pinmux_rw_hwprot___ser4___width 1 -#define reg_pinmux_rw_hwprot___ser4___bit 10 -#define reg_pinmux_rw_hwprot___sser___lsb 11 -#define reg_pinmux_rw_hwprot___sser___width 1 -#define reg_pinmux_rw_hwprot___sser___bit 11 -#define reg_pinmux_rw_hwprot___pwm0___lsb 12 -#define reg_pinmux_rw_hwprot___pwm0___width 1 -#define reg_pinmux_rw_hwprot___pwm0___bit 12 -#define reg_pinmux_rw_hwprot___pwm1___lsb 13 -#define reg_pinmux_rw_hwprot___pwm1___width 1 -#define reg_pinmux_rw_hwprot___pwm1___bit 13 -#define reg_pinmux_rw_hwprot___pwm2___lsb 14 -#define reg_pinmux_rw_hwprot___pwm2___width 1 -#define reg_pinmux_rw_hwprot___pwm2___bit 14 -#define reg_pinmux_rw_hwprot___timer0___lsb 15 -#define reg_pinmux_rw_hwprot___timer0___width 1 -#define reg_pinmux_rw_hwprot___timer0___bit 15 -#define reg_pinmux_rw_hwprot___timer1___lsb 16 -#define reg_pinmux_rw_hwprot___timer1___width 1 -#define reg_pinmux_rw_hwprot___timer1___bit 16 -#define reg_pinmux_rw_hwprot___pio___lsb 17 -#define reg_pinmux_rw_hwprot___pio___width 1 -#define reg_pinmux_rw_hwprot___pio___bit 17 -#define reg_pinmux_rw_hwprot___i2c0___lsb 18 -#define reg_pinmux_rw_hwprot___i2c0___width 1 -#define reg_pinmux_rw_hwprot___i2c0___bit 18 -#define reg_pinmux_rw_hwprot___i2c1___lsb 19 -#define reg_pinmux_rw_hwprot___i2c1___width 1 -#define reg_pinmux_rw_hwprot___i2c1___bit 19 -#define reg_pinmux_rw_hwprot___i2c1_sda1___lsb 20 -#define reg_pinmux_rw_hwprot___i2c1_sda1___width 1 -#define reg_pinmux_rw_hwprot___i2c1_sda1___bit 20 -#define reg_pinmux_rw_hwprot___i2c1_sda2___lsb 21 -#define reg_pinmux_rw_hwprot___i2c1_sda2___width 1 -#define reg_pinmux_rw_hwprot___i2c1_sda2___bit 21 -#define reg_pinmux_rw_hwprot___i2c1_sda3___lsb 22 -#define reg_pinmux_rw_hwprot___i2c1_sda3___width 1 -#define reg_pinmux_rw_hwprot___i2c1_sda3___bit 22 -#define reg_pinmux_rw_hwprot___i2c1_sen___lsb 23 -#define reg_pinmux_rw_hwprot___i2c1_sen___width 1 -#define reg_pinmux_rw_hwprot___i2c1_sen___bit 23 -#define reg_pinmux_rw_hwprot_offset 0 - -/* Register rw_gio_pa, scope pinmux, type rw */ -#define reg_pinmux_rw_gio_pa___pa0___lsb 0 -#define reg_pinmux_rw_gio_pa___pa0___width 1 -#define reg_pinmux_rw_gio_pa___pa0___bit 0 -#define reg_pinmux_rw_gio_pa___pa1___lsb 1 -#define reg_pinmux_rw_gio_pa___pa1___width 1 -#define reg_pinmux_rw_gio_pa___pa1___bit 1 -#define reg_pinmux_rw_gio_pa___pa2___lsb 2 -#define reg_pinmux_rw_gio_pa___pa2___width 1 -#define reg_pinmux_rw_gio_pa___pa2___bit 2 -#define reg_pinmux_rw_gio_pa___pa3___lsb 3 -#define reg_pinmux_rw_gio_pa___pa3___width 1 -#define reg_pinmux_rw_gio_pa___pa3___bit 3 -#define reg_pinmux_rw_gio_pa___pa4___lsb 4 -#define reg_pinmux_rw_gio_pa___pa4___width 1 -#define reg_pinmux_rw_gio_pa___pa4___bit 4 -#define reg_pinmux_rw_gio_pa___pa5___lsb 5 -#define reg_pinmux_rw_gio_pa___pa5___width 1 -#define reg_pinmux_rw_gio_pa___pa5___bit 5 -#define reg_pinmux_rw_gio_pa___pa6___lsb 6 -#define reg_pinmux_rw_gio_pa___pa6___width 1 -#define reg_pinmux_rw_gio_pa___pa6___bit 6 -#define reg_pinmux_rw_gio_pa___pa7___lsb 7 -#define reg_pinmux_rw_gio_pa___pa7___width 1 -#define reg_pinmux_rw_gio_pa___pa7___bit 7 -#define reg_pinmux_rw_gio_pa___pa8___lsb 8 -#define reg_pinmux_rw_gio_pa___pa8___width 1 -#define reg_pinmux_rw_gio_pa___pa8___bit 8 -#define reg_pinmux_rw_gio_pa___pa9___lsb 9 -#define reg_pinmux_rw_gio_pa___pa9___width 1 -#define reg_pinmux_rw_gio_pa___pa9___bit 9 -#define reg_pinmux_rw_gio_pa___pa10___lsb 10 -#define reg_pinmux_rw_gio_pa___pa10___width 1 -#define reg_pinmux_rw_gio_pa___pa10___bit 10 -#define reg_pinmux_rw_gio_pa___pa11___lsb 11 -#define reg_pinmux_rw_gio_pa___pa11___width 1 -#define reg_pinmux_rw_gio_pa___pa11___bit 11 -#define reg_pinmux_rw_gio_pa___pa12___lsb 12 -#define reg_pinmux_rw_gio_pa___pa12___width 1 -#define reg_pinmux_rw_gio_pa___pa12___bit 12 -#define reg_pinmux_rw_gio_pa___pa13___lsb 13 -#define reg_pinmux_rw_gio_pa___pa13___width 1 -#define reg_pinmux_rw_gio_pa___pa13___bit 13 -#define reg_pinmux_rw_gio_pa___pa14___lsb 14 -#define reg_pinmux_rw_gio_pa___pa14___width 1 -#define reg_pinmux_rw_gio_pa___pa14___bit 14 -#define reg_pinmux_rw_gio_pa___pa15___lsb 15 -#define reg_pinmux_rw_gio_pa___pa15___width 1 -#define reg_pinmux_rw_gio_pa___pa15___bit 15 -#define reg_pinmux_rw_gio_pa___pa16___lsb 16 -#define reg_pinmux_rw_gio_pa___pa16___width 1 -#define reg_pinmux_rw_gio_pa___pa16___bit 16 -#define reg_pinmux_rw_gio_pa___pa17___lsb 17 -#define reg_pinmux_rw_gio_pa___pa17___width 1 -#define reg_pinmux_rw_gio_pa___pa17___bit 17 -#define reg_pinmux_rw_gio_pa___pa18___lsb 18 -#define reg_pinmux_rw_gio_pa___pa18___width 1 -#define reg_pinmux_rw_gio_pa___pa18___bit 18 -#define reg_pinmux_rw_gio_pa___pa19___lsb 19 -#define reg_pinmux_rw_gio_pa___pa19___width 1 -#define reg_pinmux_rw_gio_pa___pa19___bit 19 -#define reg_pinmux_rw_gio_pa___pa20___lsb 20 -#define reg_pinmux_rw_gio_pa___pa20___width 1 -#define reg_pinmux_rw_gio_pa___pa20___bit 20 -#define reg_pinmux_rw_gio_pa___pa21___lsb 21 -#define reg_pinmux_rw_gio_pa___pa21___width 1 -#define reg_pinmux_rw_gio_pa___pa21___bit 21 -#define reg_pinmux_rw_gio_pa___pa22___lsb 22 -#define reg_pinmux_rw_gio_pa___pa22___width 1 -#define reg_pinmux_rw_gio_pa___pa22___bit 22 -#define reg_pinmux_rw_gio_pa___pa23___lsb 23 -#define reg_pinmux_rw_gio_pa___pa23___width 1 -#define reg_pinmux_rw_gio_pa___pa23___bit 23 -#define reg_pinmux_rw_gio_pa___pa24___lsb 24 -#define reg_pinmux_rw_gio_pa___pa24___width 1 -#define reg_pinmux_rw_gio_pa___pa24___bit 24 -#define reg_pinmux_rw_gio_pa___pa25___lsb 25 -#define reg_pinmux_rw_gio_pa___pa25___width 1 -#define reg_pinmux_rw_gio_pa___pa25___bit 25 -#define reg_pinmux_rw_gio_pa___pa26___lsb 26 -#define reg_pinmux_rw_gio_pa___pa26___width 1 -#define reg_pinmux_rw_gio_pa___pa26___bit 26 -#define reg_pinmux_rw_gio_pa___pa27___lsb 27 -#define reg_pinmux_rw_gio_pa___pa27___width 1 -#define reg_pinmux_rw_gio_pa___pa27___bit 27 -#define reg_pinmux_rw_gio_pa___pa28___lsb 28 -#define reg_pinmux_rw_gio_pa___pa28___width 1 -#define reg_pinmux_rw_gio_pa___pa28___bit 28 -#define reg_pinmux_rw_gio_pa___pa29___lsb 29 -#define reg_pinmux_rw_gio_pa___pa29___width 1 -#define reg_pinmux_rw_gio_pa___pa29___bit 29 -#define reg_pinmux_rw_gio_pa___pa30___lsb 30 -#define reg_pinmux_rw_gio_pa___pa30___width 1 -#define reg_pinmux_rw_gio_pa___pa30___bit 30 -#define reg_pinmux_rw_gio_pa___pa31___lsb 31 -#define reg_pinmux_rw_gio_pa___pa31___width 1 -#define reg_pinmux_rw_gio_pa___pa31___bit 31 -#define reg_pinmux_rw_gio_pa_offset 4 - -/* Register rw_gio_pb, scope pinmux, type rw */ -#define reg_pinmux_rw_gio_pb___pb0___lsb 0 -#define reg_pinmux_rw_gio_pb___pb0___width 1 -#define reg_pinmux_rw_gio_pb___pb0___bit 0 -#define reg_pinmux_rw_gio_pb___pb1___lsb 1 -#define reg_pinmux_rw_gio_pb___pb1___width 1 -#define reg_pinmux_rw_gio_pb___pb1___bit 1 -#define reg_pinmux_rw_gio_pb___pb2___lsb 2 -#define reg_pinmux_rw_gio_pb___pb2___width 1 -#define reg_pinmux_rw_gio_pb___pb2___bit 2 -#define reg_pinmux_rw_gio_pb___pb3___lsb 3 -#define reg_pinmux_rw_gio_pb___pb3___width 1 -#define reg_pinmux_rw_gio_pb___pb3___bit 3 -#define reg_pinmux_rw_gio_pb___pb4___lsb 4 -#define reg_pinmux_rw_gio_pb___pb4___width 1 -#define reg_pinmux_rw_gio_pb___pb4___bit 4 -#define reg_pinmux_rw_gio_pb___pb5___lsb 5 -#define reg_pinmux_rw_gio_pb___pb5___width 1 -#define reg_pinmux_rw_gio_pb___pb5___bit 5 -#define reg_pinmux_rw_gio_pb___pb6___lsb 6 -#define reg_pinmux_rw_gio_pb___pb6___width 1 -#define reg_pinmux_rw_gio_pb___pb6___bit 6 -#define reg_pinmux_rw_gio_pb___pb7___lsb 7 -#define reg_pinmux_rw_gio_pb___pb7___width 1 -#define reg_pinmux_rw_gio_pb___pb7___bit 7 -#define reg_pinmux_rw_gio_pb___pb8___lsb 8 -#define reg_pinmux_rw_gio_pb___pb8___width 1 -#define reg_pinmux_rw_gio_pb___pb8___bit 8 -#define reg_pinmux_rw_gio_pb___pb9___lsb 9 -#define reg_pinmux_rw_gio_pb___pb9___width 1 -#define reg_pinmux_rw_gio_pb___pb9___bit 9 -#define reg_pinmux_rw_gio_pb___pb10___lsb 10 -#define reg_pinmux_rw_gio_pb___pb10___width 1 -#define reg_pinmux_rw_gio_pb___pb10___bit 10 -#define reg_pinmux_rw_gio_pb___pb11___lsb 11 -#define reg_pinmux_rw_gio_pb___pb11___width 1 -#define reg_pinmux_rw_gio_pb___pb11___bit 11 -#define reg_pinmux_rw_gio_pb___pb12___lsb 12 -#define reg_pinmux_rw_gio_pb___pb12___width 1 -#define reg_pinmux_rw_gio_pb___pb12___bit 12 -#define reg_pinmux_rw_gio_pb___pb13___lsb 13 -#define reg_pinmux_rw_gio_pb___pb13___width 1 -#define reg_pinmux_rw_gio_pb___pb13___bit 13 -#define reg_pinmux_rw_gio_pb___pb14___lsb 14 -#define reg_pinmux_rw_gio_pb___pb14___width 1 -#define reg_pinmux_rw_gio_pb___pb14___bit 14 -#define reg_pinmux_rw_gio_pb___pb15___lsb 15 -#define reg_pinmux_rw_gio_pb___pb15___width 1 -#define reg_pinmux_rw_gio_pb___pb15___bit 15 -#define reg_pinmux_rw_gio_pb___pb16___lsb 16 -#define reg_pinmux_rw_gio_pb___pb16___width 1 -#define reg_pinmux_rw_gio_pb___pb16___bit 16 -#define reg_pinmux_rw_gio_pb___pb17___lsb 17 -#define reg_pinmux_rw_gio_pb___pb17___width 1 -#define reg_pinmux_rw_gio_pb___pb17___bit 17 -#define reg_pinmux_rw_gio_pb___pb18___lsb 18 -#define reg_pinmux_rw_gio_pb___pb18___width 1 -#define reg_pinmux_rw_gio_pb___pb18___bit 18 -#define reg_pinmux_rw_gio_pb___pb19___lsb 19 -#define reg_pinmux_rw_gio_pb___pb19___width 1 -#define reg_pinmux_rw_gio_pb___pb19___bit 19 -#define reg_pinmux_rw_gio_pb___pb20___lsb 20 -#define reg_pinmux_rw_gio_pb___pb20___width 1 -#define reg_pinmux_rw_gio_pb___pb20___bit 20 -#define reg_pinmux_rw_gio_pb___pb21___lsb 21 -#define reg_pinmux_rw_gio_pb___pb21___width 1 -#define reg_pinmux_rw_gio_pb___pb21___bit 21 -#define reg_pinmux_rw_gio_pb___pb22___lsb 22 -#define reg_pinmux_rw_gio_pb___pb22___width 1 -#define reg_pinmux_rw_gio_pb___pb22___bit 22 -#define reg_pinmux_rw_gio_pb___pb23___lsb 23 -#define reg_pinmux_rw_gio_pb___pb23___width 1 -#define reg_pinmux_rw_gio_pb___pb23___bit 23 -#define reg_pinmux_rw_gio_pb___pb24___lsb 24 -#define reg_pinmux_rw_gio_pb___pb24___width 1 -#define reg_pinmux_rw_gio_pb___pb24___bit 24 -#define reg_pinmux_rw_gio_pb___pb25___lsb 25 -#define reg_pinmux_rw_gio_pb___pb25___width 1 -#define reg_pinmux_rw_gio_pb___pb25___bit 25 -#define reg_pinmux_rw_gio_pb___pb26___lsb 26 -#define reg_pinmux_rw_gio_pb___pb26___width 1 -#define reg_pinmux_rw_gio_pb___pb26___bit 26 -#define reg_pinmux_rw_gio_pb___pb27___lsb 27 -#define reg_pinmux_rw_gio_pb___pb27___width 1 -#define reg_pinmux_rw_gio_pb___pb27___bit 27 -#define reg_pinmux_rw_gio_pb___pb28___lsb 28 -#define reg_pinmux_rw_gio_pb___pb28___width 1 -#define reg_pinmux_rw_gio_pb___pb28___bit 28 -#define reg_pinmux_rw_gio_pb___pb29___lsb 29 -#define reg_pinmux_rw_gio_pb___pb29___width 1 -#define reg_pinmux_rw_gio_pb___pb29___bit 29 -#define reg_pinmux_rw_gio_pb___pb30___lsb 30 -#define reg_pinmux_rw_gio_pb___pb30___width 1 -#define reg_pinmux_rw_gio_pb___pb30___bit 30 -#define reg_pinmux_rw_gio_pb___pb31___lsb 31 -#define reg_pinmux_rw_gio_pb___pb31___width 1 -#define reg_pinmux_rw_gio_pb___pb31___bit 31 -#define reg_pinmux_rw_gio_pb_offset 8 - -/* Register rw_gio_pc, scope pinmux, type rw */ -#define reg_pinmux_rw_gio_pc___pc0___lsb 0 -#define reg_pinmux_rw_gio_pc___pc0___width 1 -#define reg_pinmux_rw_gio_pc___pc0___bit 0 -#define reg_pinmux_rw_gio_pc___pc1___lsb 1 -#define reg_pinmux_rw_gio_pc___pc1___width 1 -#define reg_pinmux_rw_gio_pc___pc1___bit 1 -#define reg_pinmux_rw_gio_pc___pc2___lsb 2 -#define reg_pinmux_rw_gio_pc___pc2___width 1 -#define reg_pinmux_rw_gio_pc___pc2___bit 2 -#define reg_pinmux_rw_gio_pc___pc3___lsb 3 -#define reg_pinmux_rw_gio_pc___pc3___width 1 -#define reg_pinmux_rw_gio_pc___pc3___bit 3 -#define reg_pinmux_rw_gio_pc___pc4___lsb 4 -#define reg_pinmux_rw_gio_pc___pc4___width 1 -#define reg_pinmux_rw_gio_pc___pc4___bit 4 -#define reg_pinmux_rw_gio_pc___pc5___lsb 5 -#define reg_pinmux_rw_gio_pc___pc5___width 1 -#define reg_pinmux_rw_gio_pc___pc5___bit 5 -#define reg_pinmux_rw_gio_pc___pc6___lsb 6 -#define reg_pinmux_rw_gio_pc___pc6___width 1 -#define reg_pinmux_rw_gio_pc___pc6___bit 6 -#define reg_pinmux_rw_gio_pc___pc7___lsb 7 -#define reg_pinmux_rw_gio_pc___pc7___width 1 -#define reg_pinmux_rw_gio_pc___pc7___bit 7 -#define reg_pinmux_rw_gio_pc___pc8___lsb 8 -#define reg_pinmux_rw_gio_pc___pc8___width 1 -#define reg_pinmux_rw_gio_pc___pc8___bit 8 -#define reg_pinmux_rw_gio_pc___pc9___lsb 9 -#define reg_pinmux_rw_gio_pc___pc9___width 1 -#define reg_pinmux_rw_gio_pc___pc9___bit 9 -#define reg_pinmux_rw_gio_pc___pc10___lsb 10 -#define reg_pinmux_rw_gio_pc___pc10___width 1 -#define reg_pinmux_rw_gio_pc___pc10___bit 10 -#define reg_pinmux_rw_gio_pc___pc11___lsb 11 -#define reg_pinmux_rw_gio_pc___pc11___width 1 -#define reg_pinmux_rw_gio_pc___pc11___bit 11 -#define reg_pinmux_rw_gio_pc___pc12___lsb 12 -#define reg_pinmux_rw_gio_pc___pc12___width 1 -#define reg_pinmux_rw_gio_pc___pc12___bit 12 -#define reg_pinmux_rw_gio_pc___pc13___lsb 13 -#define reg_pinmux_rw_gio_pc___pc13___width 1 -#define reg_pinmux_rw_gio_pc___pc13___bit 13 -#define reg_pinmux_rw_gio_pc___pc14___lsb 14 -#define reg_pinmux_rw_gio_pc___pc14___width 1 -#define reg_pinmux_rw_gio_pc___pc14___bit 14 -#define reg_pinmux_rw_gio_pc___pc15___lsb 15 -#define reg_pinmux_rw_gio_pc___pc15___width 1 -#define reg_pinmux_rw_gio_pc___pc15___bit 15 -#define reg_pinmux_rw_gio_pc_offset 12 - -/* Register rw_iop_pa, scope pinmux, type rw */ -#define reg_pinmux_rw_iop_pa___pa0___lsb 0 -#define reg_pinmux_rw_iop_pa___pa0___width 1 -#define reg_pinmux_rw_iop_pa___pa0___bit 0 -#define reg_pinmux_rw_iop_pa___pa1___lsb 1 -#define reg_pinmux_rw_iop_pa___pa1___width 1 -#define reg_pinmux_rw_iop_pa___pa1___bit 1 -#define reg_pinmux_rw_iop_pa___pa2___lsb 2 -#define reg_pinmux_rw_iop_pa___pa2___width 1 -#define reg_pinmux_rw_iop_pa___pa2___bit 2 -#define reg_pinmux_rw_iop_pa___pa3___lsb 3 -#define reg_pinmux_rw_iop_pa___pa3___width 1 -#define reg_pinmux_rw_iop_pa___pa3___bit 3 -#define reg_pinmux_rw_iop_pa___pa4___lsb 4 -#define reg_pinmux_rw_iop_pa___pa4___width 1 -#define reg_pinmux_rw_iop_pa___pa4___bit 4 -#define reg_pinmux_rw_iop_pa___pa5___lsb 5 -#define reg_pinmux_rw_iop_pa___pa5___width 1 -#define reg_pinmux_rw_iop_pa___pa5___bit 5 -#define reg_pinmux_rw_iop_pa___pa6___lsb 6 -#define reg_pinmux_rw_iop_pa___pa6___width 1 -#define reg_pinmux_rw_iop_pa___pa6___bit 6 -#define reg_pinmux_rw_iop_pa___pa7___lsb 7 -#define reg_pinmux_rw_iop_pa___pa7___width 1 -#define reg_pinmux_rw_iop_pa___pa7___bit 7 -#define reg_pinmux_rw_iop_pa___pa8___lsb 8 -#define reg_pinmux_rw_iop_pa___pa8___width 1 -#define reg_pinmux_rw_iop_pa___pa8___bit 8 -#define reg_pinmux_rw_iop_pa___pa9___lsb 9 -#define reg_pinmux_rw_iop_pa___pa9___width 1 -#define reg_pinmux_rw_iop_pa___pa9___bit 9 -#define reg_pinmux_rw_iop_pa___pa10___lsb 10 -#define reg_pinmux_rw_iop_pa___pa10___width 1 -#define reg_pinmux_rw_iop_pa___pa10___bit 10 -#define reg_pinmux_rw_iop_pa___pa11___lsb 11 -#define reg_pinmux_rw_iop_pa___pa11___width 1 -#define reg_pinmux_rw_iop_pa___pa11___bit 11 -#define reg_pinmux_rw_iop_pa___pa12___lsb 12 -#define reg_pinmux_rw_iop_pa___pa12___width 1 -#define reg_pinmux_rw_iop_pa___pa12___bit 12 -#define reg_pinmux_rw_iop_pa___pa13___lsb 13 -#define reg_pinmux_rw_iop_pa___pa13___width 1 -#define reg_pinmux_rw_iop_pa___pa13___bit 13 -#define reg_pinmux_rw_iop_pa___pa14___lsb 14 -#define reg_pinmux_rw_iop_pa___pa14___width 1 -#define reg_pinmux_rw_iop_pa___pa14___bit 14 -#define reg_pinmux_rw_iop_pa___pa15___lsb 15 -#define reg_pinmux_rw_iop_pa___pa15___width 1 -#define reg_pinmux_rw_iop_pa___pa15___bit 15 -#define reg_pinmux_rw_iop_pa___pa16___lsb 16 -#define reg_pinmux_rw_iop_pa___pa16___width 1 -#define reg_pinmux_rw_iop_pa___pa16___bit 16 -#define reg_pinmux_rw_iop_pa___pa17___lsb 17 -#define reg_pinmux_rw_iop_pa___pa17___width 1 -#define reg_pinmux_rw_iop_pa___pa17___bit 17 -#define reg_pinmux_rw_iop_pa___pa18___lsb 18 -#define reg_pinmux_rw_iop_pa___pa18___width 1 -#define reg_pinmux_rw_iop_pa___pa18___bit 18 -#define reg_pinmux_rw_iop_pa___pa19___lsb 19 -#define reg_pinmux_rw_iop_pa___pa19___width 1 -#define reg_pinmux_rw_iop_pa___pa19___bit 19 -#define reg_pinmux_rw_iop_pa___pa20___lsb 20 -#define reg_pinmux_rw_iop_pa___pa20___width 1 -#define reg_pinmux_rw_iop_pa___pa20___bit 20 -#define reg_pinmux_rw_iop_pa___pa21___lsb 21 -#define reg_pinmux_rw_iop_pa___pa21___width 1 -#define reg_pinmux_rw_iop_pa___pa21___bit 21 -#define reg_pinmux_rw_iop_pa___pa22___lsb 22 -#define reg_pinmux_rw_iop_pa___pa22___width 1 -#define reg_pinmux_rw_iop_pa___pa22___bit 22 -#define reg_pinmux_rw_iop_pa___pa23___lsb 23 -#define reg_pinmux_rw_iop_pa___pa23___width 1 -#define reg_pinmux_rw_iop_pa___pa23___bit 23 -#define reg_pinmux_rw_iop_pa___pa24___lsb 24 -#define reg_pinmux_rw_iop_pa___pa24___width 1 -#define reg_pinmux_rw_iop_pa___pa24___bit 24 -#define reg_pinmux_rw_iop_pa___pa25___lsb 25 -#define reg_pinmux_rw_iop_pa___pa25___width 1 -#define reg_pinmux_rw_iop_pa___pa25___bit 25 -#define reg_pinmux_rw_iop_pa___pa26___lsb 26 -#define reg_pinmux_rw_iop_pa___pa26___width 1 -#define reg_pinmux_rw_iop_pa___pa26___bit 26 -#define reg_pinmux_rw_iop_pa___pa27___lsb 27 -#define reg_pinmux_rw_iop_pa___pa27___width 1 -#define reg_pinmux_rw_iop_pa___pa27___bit 27 -#define reg_pinmux_rw_iop_pa___pa28___lsb 28 -#define reg_pinmux_rw_iop_pa___pa28___width 1 -#define reg_pinmux_rw_iop_pa___pa28___bit 28 -#define reg_pinmux_rw_iop_pa___pa29___lsb 29 -#define reg_pinmux_rw_iop_pa___pa29___width 1 -#define reg_pinmux_rw_iop_pa___pa29___bit 29 -#define reg_pinmux_rw_iop_pa___pa30___lsb 30 -#define reg_pinmux_rw_iop_pa___pa30___width 1 -#define reg_pinmux_rw_iop_pa___pa30___bit 30 -#define reg_pinmux_rw_iop_pa___pa31___lsb 31 -#define reg_pinmux_rw_iop_pa___pa31___width 1 -#define reg_pinmux_rw_iop_pa___pa31___bit 31 -#define reg_pinmux_rw_iop_pa_offset 16 - -/* Register rw_iop_pb, scope pinmux, type rw */ -#define reg_pinmux_rw_iop_pb___pb0___lsb 0 -#define reg_pinmux_rw_iop_pb___pb0___width 1 -#define reg_pinmux_rw_iop_pb___pb0___bit 0 -#define reg_pinmux_rw_iop_pb___pb1___lsb 1 -#define reg_pinmux_rw_iop_pb___pb1___width 1 -#define reg_pinmux_rw_iop_pb___pb1___bit 1 -#define reg_pinmux_rw_iop_pb___pb2___lsb 2 -#define reg_pinmux_rw_iop_pb___pb2___width 1 -#define reg_pinmux_rw_iop_pb___pb2___bit 2 -#define reg_pinmux_rw_iop_pb___pb3___lsb 3 -#define reg_pinmux_rw_iop_pb___pb3___width 1 -#define reg_pinmux_rw_iop_pb___pb3___bit 3 -#define reg_pinmux_rw_iop_pb___pb4___lsb 4 -#define reg_pinmux_rw_iop_pb___pb4___width 1 -#define reg_pinmux_rw_iop_pb___pb4___bit 4 -#define reg_pinmux_rw_iop_pb___pb5___lsb 5 -#define reg_pinmux_rw_iop_pb___pb5___width 1 -#define reg_pinmux_rw_iop_pb___pb5___bit 5 -#define reg_pinmux_rw_iop_pb___pb6___lsb 6 -#define reg_pinmux_rw_iop_pb___pb6___width 1 -#define reg_pinmux_rw_iop_pb___pb6___bit 6 -#define reg_pinmux_rw_iop_pb___pb7___lsb 7 -#define reg_pinmux_rw_iop_pb___pb7___width 1 -#define reg_pinmux_rw_iop_pb___pb7___bit 7 -#define reg_pinmux_rw_iop_pb_offset 20 - -/* Register rw_iop_pio, scope pinmux, type rw */ -#define reg_pinmux_rw_iop_pio___d0___lsb 0 -#define reg_pinmux_rw_iop_pio___d0___width 1 -#define reg_pinmux_rw_iop_pio___d0___bit 0 -#define reg_pinmux_rw_iop_pio___d1___lsb 1 -#define reg_pinmux_rw_iop_pio___d1___width 1 -#define reg_pinmux_rw_iop_pio___d1___bit 1 -#define reg_pinmux_rw_iop_pio___d2___lsb 2 -#define reg_pinmux_rw_iop_pio___d2___width 1 -#define reg_pinmux_rw_iop_pio___d2___bit 2 -#define reg_pinmux_rw_iop_pio___d3___lsb 3 -#define reg_pinmux_rw_iop_pio___d3___width 1 -#define reg_pinmux_rw_iop_pio___d3___bit 3 -#define reg_pinmux_rw_iop_pio___d4___lsb 4 -#define reg_pinmux_rw_iop_pio___d4___width 1 -#define reg_pinmux_rw_iop_pio___d4___bit 4 -#define reg_pinmux_rw_iop_pio___d5___lsb 5 -#define reg_pinmux_rw_iop_pio___d5___width 1 -#define reg_pinmux_rw_iop_pio___d5___bit 5 -#define reg_pinmux_rw_iop_pio___d6___lsb 6 -#define reg_pinmux_rw_iop_pio___d6___width 1 -#define reg_pinmux_rw_iop_pio___d6___bit 6 -#define reg_pinmux_rw_iop_pio___d7___lsb 7 -#define reg_pinmux_rw_iop_pio___d7___width 1 -#define reg_pinmux_rw_iop_pio___d7___bit 7 -#define reg_pinmux_rw_iop_pio___rd_n___lsb 8 -#define reg_pinmux_rw_iop_pio___rd_n___width 1 -#define reg_pinmux_rw_iop_pio___rd_n___bit 8 -#define reg_pinmux_rw_iop_pio___wr_n___lsb 9 -#define reg_pinmux_rw_iop_pio___wr_n___width 1 -#define reg_pinmux_rw_iop_pio___wr_n___bit 9 -#define reg_pinmux_rw_iop_pio___a0___lsb 10 -#define reg_pinmux_rw_iop_pio___a0___width 1 -#define reg_pinmux_rw_iop_pio___a0___bit 10 -#define reg_pinmux_rw_iop_pio___a1___lsb 11 -#define reg_pinmux_rw_iop_pio___a1___width 1 -#define reg_pinmux_rw_iop_pio___a1___bit 11 -#define reg_pinmux_rw_iop_pio___ce0_n___lsb 12 -#define reg_pinmux_rw_iop_pio___ce0_n___width 1 -#define reg_pinmux_rw_iop_pio___ce0_n___bit 12 -#define reg_pinmux_rw_iop_pio___ce1_n___lsb 13 -#define reg_pinmux_rw_iop_pio___ce1_n___width 1 -#define reg_pinmux_rw_iop_pio___ce1_n___bit 13 -#define reg_pinmux_rw_iop_pio___ce2_n___lsb 14 -#define reg_pinmux_rw_iop_pio___ce2_n___width 1 -#define reg_pinmux_rw_iop_pio___ce2_n___bit 14 -#define reg_pinmux_rw_iop_pio___rdy___lsb 15 -#define reg_pinmux_rw_iop_pio___rdy___width 1 -#define reg_pinmux_rw_iop_pio___rdy___bit 15 -#define reg_pinmux_rw_iop_pio_offset 24 - -/* Register rw_iop_usb, scope pinmux, type rw */ -#define reg_pinmux_rw_iop_usb___usb0___lsb 0 -#define reg_pinmux_rw_iop_usb___usb0___width 1 -#define reg_pinmux_rw_iop_usb___usb0___bit 0 -#define reg_pinmux_rw_iop_usb_offset 28 - - -/* Constants */ -#define regk_pinmux_no 0x00000000 -#define regk_pinmux_rw_gio_pa_default 0x00000000 -#define regk_pinmux_rw_gio_pb_default 0x00000000 -#define regk_pinmux_rw_gio_pc_default 0x00000000 -#define regk_pinmux_rw_hwprot_default 0x00000000 -#define regk_pinmux_rw_iop_pa_default 0x00000000 -#define regk_pinmux_rw_iop_pb_default 0x00000000 -#define regk_pinmux_rw_iop_pio_default 0x00000000 -#define regk_pinmux_rw_iop_usb_default 0x00000001 -#define regk_pinmux_yes 0x00000001 -#endif /* __pinmux_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pio_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pio_defs_asm.h deleted file mode 100644 index 3907ef4921c8..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/pio_defs_asm.h +++ /dev/null @@ -1,337 +0,0 @@ -#ifndef __pio_defs_asm_h -#define __pio_defs_asm_h - -/* - * This file is autogenerated from - * file: pio.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile pio_defs_asm.h pio.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_data, scope pio, type rw */ -#define reg_pio_rw_data_offset 64 - -/* Register rw_io_access0, scope pio, type rw */ -#define reg_pio_rw_io_access0___data___lsb 0 -#define reg_pio_rw_io_access0___data___width 8 -#define reg_pio_rw_io_access0_offset 0 - -/* Register rw_io_access1, scope pio, type rw */ -#define reg_pio_rw_io_access1___data___lsb 0 -#define reg_pio_rw_io_access1___data___width 8 -#define reg_pio_rw_io_access1_offset 4 - -/* Register rw_io_access2, scope pio, type rw */ -#define reg_pio_rw_io_access2___data___lsb 0 -#define reg_pio_rw_io_access2___data___width 8 -#define reg_pio_rw_io_access2_offset 8 - -/* Register rw_io_access3, scope pio, type rw */ -#define reg_pio_rw_io_access3___data___lsb 0 -#define reg_pio_rw_io_access3___data___width 8 -#define reg_pio_rw_io_access3_offset 12 - -/* Register rw_io_access4, scope pio, type rw */ -#define reg_pio_rw_io_access4___data___lsb 0 -#define reg_pio_rw_io_access4___data___width 8 -#define reg_pio_rw_io_access4_offset 16 - -/* Register rw_io_access5, scope pio, type rw */ -#define reg_pio_rw_io_access5___data___lsb 0 -#define reg_pio_rw_io_access5___data___width 8 -#define reg_pio_rw_io_access5_offset 20 - -/* Register rw_io_access6, scope pio, type rw */ -#define reg_pio_rw_io_access6___data___lsb 0 -#define reg_pio_rw_io_access6___data___width 8 -#define reg_pio_rw_io_access6_offset 24 - -/* Register rw_io_access7, scope pio, type rw */ -#define reg_pio_rw_io_access7___data___lsb 0 -#define reg_pio_rw_io_access7___data___width 8 -#define reg_pio_rw_io_access7_offset 28 - -/* Register rw_io_access8, scope pio, type rw */ -#define reg_pio_rw_io_access8___data___lsb 0 -#define reg_pio_rw_io_access8___data___width 8 -#define reg_pio_rw_io_access8_offset 32 - -/* Register rw_io_access9, scope pio, type rw */ -#define reg_pio_rw_io_access9___data___lsb 0 -#define reg_pio_rw_io_access9___data___width 8 -#define reg_pio_rw_io_access9_offset 36 - -/* Register rw_io_access10, scope pio, type rw */ -#define reg_pio_rw_io_access10___data___lsb 0 -#define reg_pio_rw_io_access10___data___width 8 -#define reg_pio_rw_io_access10_offset 40 - -/* Register rw_io_access11, scope pio, type rw */ -#define reg_pio_rw_io_access11___data___lsb 0 -#define reg_pio_rw_io_access11___data___width 8 -#define reg_pio_rw_io_access11_offset 44 - -/* Register rw_io_access12, scope pio, type rw */ -#define reg_pio_rw_io_access12___data___lsb 0 -#define reg_pio_rw_io_access12___data___width 8 -#define reg_pio_rw_io_access12_offset 48 - -/* Register rw_io_access13, scope pio, type rw */ -#define reg_pio_rw_io_access13___data___lsb 0 -#define reg_pio_rw_io_access13___data___width 8 -#define reg_pio_rw_io_access13_offset 52 - -/* Register rw_io_access14, scope pio, type rw */ -#define reg_pio_rw_io_access14___data___lsb 0 -#define reg_pio_rw_io_access14___data___width 8 -#define reg_pio_rw_io_access14_offset 56 - -/* Register rw_io_access15, scope pio, type rw */ -#define reg_pio_rw_io_access15___data___lsb 0 -#define reg_pio_rw_io_access15___data___width 8 -#define reg_pio_rw_io_access15_offset 60 - -/* Register rw_ce0_cfg, scope pio, type rw */ -#define reg_pio_rw_ce0_cfg___lw___lsb 0 -#define reg_pio_rw_ce0_cfg___lw___width 6 -#define reg_pio_rw_ce0_cfg___ew___lsb 6 -#define reg_pio_rw_ce0_cfg___ew___width 3 -#define reg_pio_rw_ce0_cfg___zw___lsb 9 -#define reg_pio_rw_ce0_cfg___zw___width 3 -#define reg_pio_rw_ce0_cfg___aw___lsb 12 -#define reg_pio_rw_ce0_cfg___aw___width 2 -#define reg_pio_rw_ce0_cfg___mode___lsb 14 -#define reg_pio_rw_ce0_cfg___mode___width 2 -#define reg_pio_rw_ce0_cfg_offset 68 - -/* Register rw_ce1_cfg, scope pio, type rw */ -#define reg_pio_rw_ce1_cfg___lw___lsb 0 -#define reg_pio_rw_ce1_cfg___lw___width 6 -#define reg_pio_rw_ce1_cfg___ew___lsb 6 -#define reg_pio_rw_ce1_cfg___ew___width 3 -#define reg_pio_rw_ce1_cfg___zw___lsb 9 -#define reg_pio_rw_ce1_cfg___zw___width 3 -#define reg_pio_rw_ce1_cfg___aw___lsb 12 -#define reg_pio_rw_ce1_cfg___aw___width 2 -#define reg_pio_rw_ce1_cfg___mode___lsb 14 -#define reg_pio_rw_ce1_cfg___mode___width 2 -#define reg_pio_rw_ce1_cfg_offset 72 - -/* Register rw_ce2_cfg, scope pio, type rw */ -#define reg_pio_rw_ce2_cfg___lw___lsb 0 -#define reg_pio_rw_ce2_cfg___lw___width 6 -#define reg_pio_rw_ce2_cfg___ew___lsb 6 -#define reg_pio_rw_ce2_cfg___ew___width 3 -#define reg_pio_rw_ce2_cfg___zw___lsb 9 -#define reg_pio_rw_ce2_cfg___zw___width 3 -#define reg_pio_rw_ce2_cfg___aw___lsb 12 -#define reg_pio_rw_ce2_cfg___aw___width 2 -#define reg_pio_rw_ce2_cfg___mode___lsb 14 -#define reg_pio_rw_ce2_cfg___mode___width 2 -#define reg_pio_rw_ce2_cfg_offset 76 - -/* Register rw_dout, scope pio, type rw */ -#define reg_pio_rw_dout___data___lsb 0 -#define reg_pio_rw_dout___data___width 8 -#define reg_pio_rw_dout___rd_n___lsb 8 -#define reg_pio_rw_dout___rd_n___width 1 -#define reg_pio_rw_dout___rd_n___bit 8 -#define reg_pio_rw_dout___wr_n___lsb 9 -#define reg_pio_rw_dout___wr_n___width 1 -#define reg_pio_rw_dout___wr_n___bit 9 -#define reg_pio_rw_dout___a0___lsb 10 -#define reg_pio_rw_dout___a0___width 1 -#define reg_pio_rw_dout___a0___bit 10 -#define reg_pio_rw_dout___a1___lsb 11 -#define reg_pio_rw_dout___a1___width 1 -#define reg_pio_rw_dout___a1___bit 11 -#define reg_pio_rw_dout___ce0_n___lsb 12 -#define reg_pio_rw_dout___ce0_n___width 1 -#define reg_pio_rw_dout___ce0_n___bit 12 -#define reg_pio_rw_dout___ce1_n___lsb 13 -#define reg_pio_rw_dout___ce1_n___width 1 -#define reg_pio_rw_dout___ce1_n___bit 13 -#define reg_pio_rw_dout___ce2_n___lsb 14 -#define reg_pio_rw_dout___ce2_n___width 1 -#define reg_pio_rw_dout___ce2_n___bit 14 -#define reg_pio_rw_dout___rdy___lsb 15 -#define reg_pio_rw_dout___rdy___width 1 -#define reg_pio_rw_dout___rdy___bit 15 -#define reg_pio_rw_dout_offset 80 - -/* Register rw_oe, scope pio, type rw */ -#define reg_pio_rw_oe___data___lsb 0 -#define reg_pio_rw_oe___data___width 8 -#define reg_pio_rw_oe___rd_n___lsb 8 -#define reg_pio_rw_oe___rd_n___width 1 -#define reg_pio_rw_oe___rd_n___bit 8 -#define reg_pio_rw_oe___wr_n___lsb 9 -#define reg_pio_rw_oe___wr_n___width 1 -#define reg_pio_rw_oe___wr_n___bit 9 -#define reg_pio_rw_oe___a0___lsb 10 -#define reg_pio_rw_oe___a0___width 1 -#define reg_pio_rw_oe___a0___bit 10 -#define reg_pio_rw_oe___a1___lsb 11 -#define reg_pio_rw_oe___a1___width 1 -#define reg_pio_rw_oe___a1___bit 11 -#define reg_pio_rw_oe___ce0_n___lsb 12 -#define reg_pio_rw_oe___ce0_n___width 1 -#define reg_pio_rw_oe___ce0_n___bit 12 -#define reg_pio_rw_oe___ce1_n___lsb 13 -#define reg_pio_rw_oe___ce1_n___width 1 -#define reg_pio_rw_oe___ce1_n___bit 13 -#define reg_pio_rw_oe___ce2_n___lsb 14 -#define reg_pio_rw_oe___ce2_n___width 1 -#define reg_pio_rw_oe___ce2_n___bit 14 -#define reg_pio_rw_oe___rdy___lsb 15 -#define reg_pio_rw_oe___rdy___width 1 -#define reg_pio_rw_oe___rdy___bit 15 -#define reg_pio_rw_oe_offset 84 - -/* Register rw_man_ctrl, scope pio, type rw */ -#define reg_pio_rw_man_ctrl___data___lsb 0 -#define reg_pio_rw_man_ctrl___data___width 8 -#define reg_pio_rw_man_ctrl___rd_n___lsb 8 -#define reg_pio_rw_man_ctrl___rd_n___width 1 -#define reg_pio_rw_man_ctrl___rd_n___bit 8 -#define reg_pio_rw_man_ctrl___wr_n___lsb 9 -#define reg_pio_rw_man_ctrl___wr_n___width 1 -#define reg_pio_rw_man_ctrl___wr_n___bit 9 -#define reg_pio_rw_man_ctrl___a0___lsb 10 -#define reg_pio_rw_man_ctrl___a0___width 1 -#define reg_pio_rw_man_ctrl___a0___bit 10 -#define reg_pio_rw_man_ctrl___a1___lsb 11 -#define reg_pio_rw_man_ctrl___a1___width 1 -#define reg_pio_rw_man_ctrl___a1___bit 11 -#define reg_pio_rw_man_ctrl___ce0_n___lsb 12 -#define reg_pio_rw_man_ctrl___ce0_n___width 1 -#define reg_pio_rw_man_ctrl___ce0_n___bit 12 -#define reg_pio_rw_man_ctrl___ce1_n___lsb 13 -#define reg_pio_rw_man_ctrl___ce1_n___width 1 -#define reg_pio_rw_man_ctrl___ce1_n___bit 13 -#define reg_pio_rw_man_ctrl___ce2_n___lsb 14 -#define reg_pio_rw_man_ctrl___ce2_n___width 1 -#define reg_pio_rw_man_ctrl___ce2_n___bit 14 -#define reg_pio_rw_man_ctrl___rdy___lsb 15 -#define reg_pio_rw_man_ctrl___rdy___width 1 -#define reg_pio_rw_man_ctrl___rdy___bit 15 -#define reg_pio_rw_man_ctrl_offset 88 - -/* Register r_din, scope pio, type r */ -#define reg_pio_r_din___data___lsb 0 -#define reg_pio_r_din___data___width 8 -#define reg_pio_r_din___rd_n___lsb 8 -#define reg_pio_r_din___rd_n___width 1 -#define reg_pio_r_din___rd_n___bit 8 -#define reg_pio_r_din___wr_n___lsb 9 -#define reg_pio_r_din___wr_n___width 1 -#define reg_pio_r_din___wr_n___bit 9 -#define reg_pio_r_din___a0___lsb 10 -#define reg_pio_r_din___a0___width 1 -#define reg_pio_r_din___a0___bit 10 -#define reg_pio_r_din___a1___lsb 11 -#define reg_pio_r_din___a1___width 1 -#define reg_pio_r_din___a1___bit 11 -#define reg_pio_r_din___ce0_n___lsb 12 -#define reg_pio_r_din___ce0_n___width 1 -#define reg_pio_r_din___ce0_n___bit 12 -#define reg_pio_r_din___ce1_n___lsb 13 -#define reg_pio_r_din___ce1_n___width 1 -#define reg_pio_r_din___ce1_n___bit 13 -#define reg_pio_r_din___ce2_n___lsb 14 -#define reg_pio_r_din___ce2_n___width 1 -#define reg_pio_r_din___ce2_n___bit 14 -#define reg_pio_r_din___rdy___lsb 15 -#define reg_pio_r_din___rdy___width 1 -#define reg_pio_r_din___rdy___bit 15 -#define reg_pio_r_din_offset 92 - -/* Register r_stat, scope pio, type r */ -#define reg_pio_r_stat___busy___lsb 0 -#define reg_pio_r_stat___busy___width 1 -#define reg_pio_r_stat___busy___bit 0 -#define reg_pio_r_stat_offset 96 - -/* Register rw_intr_mask, scope pio, type rw */ -#define reg_pio_rw_intr_mask___rdy___lsb 0 -#define reg_pio_rw_intr_mask___rdy___width 1 -#define reg_pio_rw_intr_mask___rdy___bit 0 -#define reg_pio_rw_intr_mask_offset 100 - -/* Register rw_ack_intr, scope pio, type rw */ -#define reg_pio_rw_ack_intr___rdy___lsb 0 -#define reg_pio_rw_ack_intr___rdy___width 1 -#define reg_pio_rw_ack_intr___rdy___bit 0 -#define reg_pio_rw_ack_intr_offset 104 - -/* Register r_intr, scope pio, type r */ -#define reg_pio_r_intr___rdy___lsb 0 -#define reg_pio_r_intr___rdy___width 1 -#define reg_pio_r_intr___rdy___bit 0 -#define reg_pio_r_intr_offset 108 - -/* Register r_masked_intr, scope pio, type r */ -#define reg_pio_r_masked_intr___rdy___lsb 0 -#define reg_pio_r_masked_intr___rdy___width 1 -#define reg_pio_r_masked_intr___rdy___bit 0 -#define reg_pio_r_masked_intr_offset 112 - - -/* Constants */ -#define regk_pio_a2 0x00000003 -#define regk_pio_no 0x00000000 -#define regk_pio_normal 0x00000000 -#define regk_pio_rd 0x00000001 -#define regk_pio_rw_ce0_cfg_default 0x00000000 -#define regk_pio_rw_ce1_cfg_default 0x00000000 -#define regk_pio_rw_ce2_cfg_default 0x00000000 -#define regk_pio_rw_intr_mask_default 0x00000000 -#define regk_pio_rw_man_ctrl_default 0x00000000 -#define regk_pio_rw_oe_default 0x00000000 -#define regk_pio_wr 0x00000002 -#define regk_pio_wr_ce2 0x00000003 -#define regk_pio_yes 0x00000001 -#define regk_pio_yes_all 0x000000ff -#endif /* __pio_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/reg_map_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/reg_map_asm.h deleted file mode 100644 index 89439e9610e2..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/reg_map_asm.h +++ /dev/null @@ -1,99 +0,0 @@ -#ifndef __reg_map_asm_h -#define __reg_map_asm_h - -/* - * This file is autogenerated from - * file: reg.rmap - * - * by ../../../tools/rdesc/bin/rdes2c -asm -base 0xb0000000 -map marb_bar.r marb_foo.r ccd_top.r ccd_stat.r ccd_tg.r ccd_dp.r ccd.r iop_sap_in.r iop_sap_out.r iop_sw_cfg.r iop_sw_cpu.r iop_sw_mpu.r iop_sw_spu.r iop_version.r iop_crc_par.r iop_dmc_in.r iop_dmc_out.r iop_fifo_in_extra.r iop_fifo_in.r iop_fifo_out_extra.r iop_fifo_out.r iop_mc.r iop_mpu.r iop_scrc_in.r iop_scrc_out.r iop_spu.r iop_timer_grp.r iop_trigger_grp.r iop.r -outfile reg_map_asm.h reg.rmap - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -#define regi_ccd 0xb0000000 -#define regi_ccd_top 0xb0000000 -#define regi_ccd_dp 0xb0000400 -#define regi_ccd_stat 0xb0000800 -#define regi_ccd_tg 0xb0001000 -#define regi_cfg 0xb0002000 -#define regi_clkgen 0xb0004000 -#define regi_ddr2_ctrl 0xb0006000 -#define regi_dma0 0xb0008000 -#define regi_dma1 0xb000a000 -#define regi_dma11 0xb000c000 -#define regi_dma2 0xb000e000 -#define regi_dma3 0xb0010000 -#define regi_dma4 0xb0012000 -#define regi_dma5 0xb0014000 -#define regi_dma6 0xb0016000 -#define regi_dma7 0xb0018000 -#define regi_dma9 0xb001a000 -#define regi_eth 0xb001c000 -#define regi_gio 0xb0020000 -#define regi_h264 0xb0022000 -#define regi_hist 0xb0026000 -#define regi_iop 0xb0028000 -#define regi_iop_version 0xb0028000 -#define regi_iop_fifo_in_extra 0xb0028040 -#define regi_iop_fifo_out_extra 0xb0028080 -#define regi_iop_trigger_grp0 0xb00280c0 -#define regi_iop_trigger_grp1 0xb0028100 -#define regi_iop_trigger_grp2 0xb0028140 -#define regi_iop_trigger_grp3 0xb0028180 -#define regi_iop_trigger_grp4 0xb00281c0 -#define regi_iop_trigger_grp5 0xb0028200 -#define regi_iop_trigger_grp6 0xb0028240 -#define regi_iop_trigger_grp7 0xb0028280 -#define regi_iop_crc_par 0xb0028300 -#define regi_iop_dmc_in 0xb0028380 -#define regi_iop_dmc_out 0xb0028400 -#define regi_iop_fifo_in 0xb0028480 -#define regi_iop_fifo_out 0xb0028500 -#define regi_iop_scrc_in 0xb0028580 -#define regi_iop_scrc_out 0xb0028600 -#define regi_iop_timer_grp0 0xb0028680 -#define regi_iop_timer_grp1 0xb0028700 -#define regi_iop_sap_in 0xb0028800 -#define regi_iop_sap_out 0xb0028900 -#define regi_iop_spu 0xb0028a00 -#define regi_iop_sw_cfg 0xb0028b00 -#define regi_iop_sw_cpu 0xb0028c00 -#define regi_iop_sw_mpu 0xb0028d00 -#define regi_iop_sw_spu 0xb0028e00 -#define regi_iop_mpu 0xb0029000 -#define regi_irq 0xb002a000 -#define regi_jpeg 0xb002c000 -#define regi_l2cache 0xb0030000 -#define regi_marb_bar 0xb0032000 -#define regi_marb_bar_bp0 0xb0032140 -#define regi_marb_bar_bp1 0xb0032180 -#define regi_marb_bar_bp2 0xb00321c0 -#define regi_marb_bar_bp3 0xb0032200 -#define regi_marb_foo 0xb0034000 -#define regi_marb_foo_bp0 0xb0034280 -#define regi_marb_foo_bp1 0xb00342c0 -#define regi_marb_foo_bp2 0xb0034300 -#define regi_marb_foo_bp3 0xb0034340 -#define regi_pinmux 0xb0038000 -#define regi_pio 0xb0036000 -#define regi_sclr 0xb003a000 -#define regi_sclr_fifo 0xb003c000 -#define regi_ser0 0xb003e000 -#define regi_ser1 0xb0040000 -#define regi_ser2 0xb0042000 -#define regi_ser3 0xb0044000 -#define regi_ser4 0xb0046000 -#define regi_sser 0xb0048000 -#define regi_strcop 0xb004a000 -#define regi_strdma0 0xb004e000 -#define regi_strdma1 0xb0050000 -#define regi_strdma2 0xb0052000 -#define regi_strdma3 0xb0054000 -#define regi_strdma5 0xb0056000 -#define regi_strmux 0xb004c000 -#define regi_timer0 0xb0058000 -#define regi_timer1 0xb005a000 -#define regi_trace 0xb005c000 -#define regi_vin 0xb005e000 -#define regi_vout 0xb0060000 -#endif /* __reg_map_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/timer_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/asm/timer_defs_asm.h deleted file mode 100644 index b129e826fc34..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/asm/timer_defs_asm.h +++ /dev/null @@ -1,228 +0,0 @@ -#ifndef __timer_defs_asm_h -#define __timer_defs_asm_h - -/* - * This file is autogenerated from - * file: timer.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile timer_defs_asm.h timer.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_tmr0_div, scope timer, type rw */ -#define reg_timer_rw_tmr0_div_offset 0 - -/* Register r_tmr0_data, scope timer, type r */ -#define reg_timer_r_tmr0_data_offset 4 - -/* Register rw_tmr0_ctrl, scope timer, type rw */ -#define reg_timer_rw_tmr0_ctrl___op___lsb 0 -#define reg_timer_rw_tmr0_ctrl___op___width 2 -#define reg_timer_rw_tmr0_ctrl___freq___lsb 2 -#define reg_timer_rw_tmr0_ctrl___freq___width 3 -#define reg_timer_rw_tmr0_ctrl_offset 8 - -/* Register rw_tmr1_div, scope timer, type rw */ -#define reg_timer_rw_tmr1_div_offset 16 - -/* Register r_tmr1_data, scope timer, type r */ -#define reg_timer_r_tmr1_data_offset 20 - -/* Register rw_tmr1_ctrl, scope timer, type rw */ -#define reg_timer_rw_tmr1_ctrl___op___lsb 0 -#define reg_timer_rw_tmr1_ctrl___op___width 2 -#define reg_timer_rw_tmr1_ctrl___freq___lsb 2 -#define reg_timer_rw_tmr1_ctrl___freq___width 3 -#define reg_timer_rw_tmr1_ctrl_offset 24 - -/* Register rs_cnt_data, scope timer, type rs */ -#define reg_timer_rs_cnt_data___tmr___lsb 0 -#define reg_timer_rs_cnt_data___tmr___width 24 -#define reg_timer_rs_cnt_data___cnt___lsb 24 -#define reg_timer_rs_cnt_data___cnt___width 8 -#define reg_timer_rs_cnt_data_offset 32 - -/* Register r_cnt_data, scope timer, type r */ -#define reg_timer_r_cnt_data___tmr___lsb 0 -#define reg_timer_r_cnt_data___tmr___width 24 -#define reg_timer_r_cnt_data___cnt___lsb 24 -#define reg_timer_r_cnt_data___cnt___width 8 -#define reg_timer_r_cnt_data_offset 36 - -/* Register rw_cnt_cfg, scope timer, type rw */ -#define reg_timer_rw_cnt_cfg___clk___lsb 0 -#define reg_timer_rw_cnt_cfg___clk___width 2 -#define reg_timer_rw_cnt_cfg_offset 40 - -/* Register rw_trig, scope timer, type rw */ -#define reg_timer_rw_trig_offset 48 - -/* Register rw_trig_cfg, scope timer, type rw */ -#define reg_timer_rw_trig_cfg___tmr___lsb 0 -#define reg_timer_rw_trig_cfg___tmr___width 2 -#define reg_timer_rw_trig_cfg_offset 52 - -/* Register r_time, scope timer, type r */ -#define reg_timer_r_time_offset 56 - -/* Register rw_out, scope timer, type rw */ -#define reg_timer_rw_out___tmr___lsb 0 -#define reg_timer_rw_out___tmr___width 2 -#define reg_timer_rw_out_offset 60 - -/* Register rw_wd_ctrl, scope timer, type rw */ -#define reg_timer_rw_wd_ctrl___cnt___lsb 0 -#define reg_timer_rw_wd_ctrl___cnt___width 8 -#define reg_timer_rw_wd_ctrl___cmd___lsb 8 -#define reg_timer_rw_wd_ctrl___cmd___width 1 -#define reg_timer_rw_wd_ctrl___cmd___bit 8 -#define reg_timer_rw_wd_ctrl___key___lsb 9 -#define reg_timer_rw_wd_ctrl___key___width 7 -#define reg_timer_rw_wd_ctrl_offset 64 - -/* Register r_wd_stat, scope timer, type r */ -#define reg_timer_r_wd_stat___cnt___lsb 0 -#define reg_timer_r_wd_stat___cnt___width 8 -#define reg_timer_r_wd_stat___cmd___lsb 8 -#define reg_timer_r_wd_stat___cmd___width 1 -#define reg_timer_r_wd_stat___cmd___bit 8 -#define reg_timer_r_wd_stat_offset 68 - -/* Register rw_intr_mask, scope timer, type rw */ -#define reg_timer_rw_intr_mask___tmr0___lsb 0 -#define reg_timer_rw_intr_mask___tmr0___width 1 -#define reg_timer_rw_intr_mask___tmr0___bit 0 -#define reg_timer_rw_intr_mask___tmr1___lsb 1 -#define reg_timer_rw_intr_mask___tmr1___width 1 -#define reg_timer_rw_intr_mask___tmr1___bit 1 -#define reg_timer_rw_intr_mask___cnt___lsb 2 -#define reg_timer_rw_intr_mask___cnt___width 1 -#define reg_timer_rw_intr_mask___cnt___bit 2 -#define reg_timer_rw_intr_mask___trig___lsb 3 -#define reg_timer_rw_intr_mask___trig___width 1 -#define reg_timer_rw_intr_mask___trig___bit 3 -#define reg_timer_rw_intr_mask_offset 72 - -/* Register rw_ack_intr, scope timer, type rw */ -#define reg_timer_rw_ack_intr___tmr0___lsb 0 -#define reg_timer_rw_ack_intr___tmr0___width 1 -#define reg_timer_rw_ack_intr___tmr0___bit 0 -#define reg_timer_rw_ack_intr___tmr1___lsb 1 -#define reg_timer_rw_ack_intr___tmr1___width 1 -#define reg_timer_rw_ack_intr___tmr1___bit 1 -#define reg_timer_rw_ack_intr___cnt___lsb 2 -#define reg_timer_rw_ack_intr___cnt___width 1 -#define reg_timer_rw_ack_intr___cnt___bit 2 -#define reg_timer_rw_ack_intr___trig___lsb 3 -#define reg_timer_rw_ack_intr___trig___width 1 -#define reg_timer_rw_ack_intr___trig___bit 3 -#define reg_timer_rw_ack_intr_offset 76 - -/* Register r_intr, scope timer, type r */ -#define reg_timer_r_intr___tmr0___lsb 0 -#define reg_timer_r_intr___tmr0___width 1 -#define reg_timer_r_intr___tmr0___bit 0 -#define reg_timer_r_intr___tmr1___lsb 1 -#define reg_timer_r_intr___tmr1___width 1 -#define reg_timer_r_intr___tmr1___bit 1 -#define reg_timer_r_intr___cnt___lsb 2 -#define reg_timer_r_intr___cnt___width 1 -#define reg_timer_r_intr___cnt___bit 2 -#define reg_timer_r_intr___trig___lsb 3 -#define reg_timer_r_intr___trig___width 1 -#define reg_timer_r_intr___trig___bit 3 -#define reg_timer_r_intr_offset 80 - -/* Register r_masked_intr, scope timer, type r */ -#define reg_timer_r_masked_intr___tmr0___lsb 0 -#define reg_timer_r_masked_intr___tmr0___width 1 -#define reg_timer_r_masked_intr___tmr0___bit 0 -#define reg_timer_r_masked_intr___tmr1___lsb 1 -#define reg_timer_r_masked_intr___tmr1___width 1 -#define reg_timer_r_masked_intr___tmr1___bit 1 -#define reg_timer_r_masked_intr___cnt___lsb 2 -#define reg_timer_r_masked_intr___cnt___width 1 -#define reg_timer_r_masked_intr___cnt___bit 2 -#define reg_timer_r_masked_intr___trig___lsb 3 -#define reg_timer_r_masked_intr___trig___width 1 -#define reg_timer_r_masked_intr___trig___bit 3 -#define reg_timer_r_masked_intr_offset 84 - -/* Register rw_test, scope timer, type rw */ -#define reg_timer_rw_test___dis___lsb 0 -#define reg_timer_rw_test___dis___width 1 -#define reg_timer_rw_test___dis___bit 0 -#define reg_timer_rw_test___en___lsb 1 -#define reg_timer_rw_test___en___width 1 -#define reg_timer_rw_test___en___bit 1 -#define reg_timer_rw_test_offset 88 - - -/* Constants */ -#define regk_timer_ext 0x00000001 -#define regk_timer_f100 0x00000007 -#define regk_timer_f29_493 0x00000004 -#define regk_timer_f32 0x00000005 -#define regk_timer_f32_768 0x00000006 -#define regk_timer_f90 0x00000003 -#define regk_timer_hold 0x00000001 -#define regk_timer_ld 0x00000000 -#define regk_timer_no 0x00000000 -#define regk_timer_off 0x00000000 -#define regk_timer_run 0x00000002 -#define regk_timer_rw_cnt_cfg_default 0x00000000 -#define regk_timer_rw_intr_mask_default 0x00000000 -#define regk_timer_rw_out_default 0x00000000 -#define regk_timer_rw_test_default 0x00000000 -#define regk_timer_rw_tmr0_ctrl_default 0x00000000 -#define regk_timer_rw_tmr1_ctrl_default 0x00000000 -#define regk_timer_rw_trig_cfg_default 0x00000000 -#define regk_timer_start 0x00000001 -#define regk_timer_stop 0x00000000 -#define regk_timer_time 0x00000001 -#define regk_timer_tmr0 0x00000002 -#define regk_timer_tmr1 0x00000003 -#define regk_timer_vclk 0x00000002 -#define regk_timer_yes 0x00000001 -#endif /* __timer_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/clkgen_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/clkgen_defs.h deleted file mode 100644 index c1e9ba93b3a3..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/clkgen_defs.h +++ /dev/null @@ -1,159 +0,0 @@ -#ifndef __clkgen_defs_h -#define __clkgen_defs_h - -/* - * This file is autogenerated from - * file: clkgen.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile clkgen_defs.h clkgen.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope clkgen */ - -/* Register r_bootsel, scope clkgen, type r */ -typedef struct { - unsigned int boot_mode : 5; - unsigned int intern_main_clk : 1; - unsigned int extern_usb2_clk : 1; - unsigned int dummy1 : 25; -} reg_clkgen_r_bootsel; -#define REG_RD_ADDR_clkgen_r_bootsel 0 - -/* Register rw_clk_ctrl, scope clkgen, type rw */ -typedef struct { - unsigned int pll : 1; - unsigned int cpu : 1; - unsigned int iop_usb : 1; - unsigned int vin : 1; - unsigned int sclr : 1; - unsigned int h264 : 1; - unsigned int ddr2 : 1; - unsigned int vout_hist : 1; - unsigned int eth : 1; - unsigned int ccd_tg_200 : 1; - unsigned int dma0_1_eth : 1; - unsigned int ccd_tg_100 : 1; - unsigned int jpeg : 1; - unsigned int sser_ser_dma6_7 : 1; - unsigned int strdma0_2_video : 1; - unsigned int dma2_3_strcop : 1; - unsigned int dma4_5_iop : 1; - unsigned int dma9_11 : 1; - unsigned int memarb_bar_ddr : 1; - unsigned int sclr_h264 : 1; - unsigned int dummy1 : 12; -} reg_clkgen_rw_clk_ctrl; -#define REG_RD_ADDR_clkgen_rw_clk_ctrl 4 -#define REG_WR_ADDR_clkgen_rw_clk_ctrl 4 - - -/* Constants */ -enum { - regk_clkgen_eth1000_rx = 0x0000000c, - regk_clkgen_eth1000_tx = 0x0000000e, - regk_clkgen_eth100_rx = 0x0000001d, - regk_clkgen_eth100_rx_half = 0x0000001c, - regk_clkgen_eth100_tx = 0x0000001f, - regk_clkgen_eth100_tx_half = 0x0000001e, - regk_clkgen_nand_3_2 = 0x00000000, - regk_clkgen_nand_3_2_0x30 = 0x00000002, - regk_clkgen_nand_3_2_0x30_pll = 0x00000012, - regk_clkgen_nand_3_2_pll = 0x00000010, - regk_clkgen_nand_3_3 = 0x00000001, - regk_clkgen_nand_3_3_0x30 = 0x00000003, - regk_clkgen_nand_3_3_0x30_pll = 0x00000013, - regk_clkgen_nand_3_3_pll = 0x00000011, - regk_clkgen_nand_4_2 = 0x00000004, - regk_clkgen_nand_4_2_0x30 = 0x00000006, - regk_clkgen_nand_4_2_0x30_pll = 0x00000016, - regk_clkgen_nand_4_2_pll = 0x00000014, - regk_clkgen_nand_4_3 = 0x00000005, - regk_clkgen_nand_4_3_0x30 = 0x00000007, - regk_clkgen_nand_4_3_0x30_pll = 0x00000017, - regk_clkgen_nand_4_3_pll = 0x00000015, - regk_clkgen_nand_5_2 = 0x00000008, - regk_clkgen_nand_5_2_0x30 = 0x0000000a, - regk_clkgen_nand_5_2_0x30_pll = 0x0000001a, - regk_clkgen_nand_5_2_pll = 0x00000018, - regk_clkgen_nand_5_3 = 0x00000009, - regk_clkgen_nand_5_3_0x30 = 0x0000000b, - regk_clkgen_nand_5_3_0x30_pll = 0x0000001b, - regk_clkgen_nand_5_3_pll = 0x00000019, - regk_clkgen_no = 0x00000000, - regk_clkgen_rw_clk_ctrl_default = 0x00000002, - regk_clkgen_ser = 0x0000000d, - regk_clkgen_ser_pll = 0x0000000f, - regk_clkgen_yes = 0x00000001 -}; -#endif /* __clkgen_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/ddr2_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/ddr2_defs.h deleted file mode 100644 index 0f30e8bf946d..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/ddr2_defs.h +++ /dev/null @@ -1,281 +0,0 @@ -#ifndef __ddr2_defs_h -#define __ddr2_defs_h - -/* - * This file is autogenerated from - * file: ddr2.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile ddr2_defs.h ddr2.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope ddr2 */ - -/* Register rw_cfg, scope ddr2, type rw */ -typedef struct { - unsigned int col_width : 4; - unsigned int nr_banks : 1; - unsigned int bw : 1; - unsigned int nr_ref : 4; - unsigned int ref_interval : 11; - unsigned int odt_ctrl : 2; - unsigned int odt_mem : 1; - unsigned int imp_strength : 1; - unsigned int auto_imp_cal : 1; - unsigned int imp_cal_override : 1; - unsigned int dll_override : 1; - unsigned int dummy1 : 4; -} reg_ddr2_rw_cfg; -#define REG_RD_ADDR_ddr2_rw_cfg 0 -#define REG_WR_ADDR_ddr2_rw_cfg 0 - -/* Register rw_timing, scope ddr2, type rw */ -typedef struct { - unsigned int wr : 3; - unsigned int rcd : 3; - unsigned int rp : 3; - unsigned int ras : 4; - unsigned int rfc : 7; - unsigned int rc : 5; - unsigned int rtp : 2; - unsigned int rtw : 3; - unsigned int wtr : 2; -} reg_ddr2_rw_timing; -#define REG_RD_ADDR_ddr2_rw_timing 4 -#define REG_WR_ADDR_ddr2_rw_timing 4 - -/* Register rw_latency, scope ddr2, type rw */ -typedef struct { - unsigned int cas : 3; - unsigned int additive : 3; - unsigned int dummy1 : 26; -} reg_ddr2_rw_latency; -#define REG_RD_ADDR_ddr2_rw_latency 8 -#define REG_WR_ADDR_ddr2_rw_latency 8 - -/* Register rw_phy_cfg, scope ddr2, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int dummy1 : 31; -} reg_ddr2_rw_phy_cfg; -#define REG_RD_ADDR_ddr2_rw_phy_cfg 12 -#define REG_WR_ADDR_ddr2_rw_phy_cfg 12 - -/* Register rw_phy_ctrl, scope ddr2, type rw */ -typedef struct { - unsigned int rst : 1; - unsigned int cal_rst : 1; - unsigned int cal_start : 1; - unsigned int dummy1 : 29; -} reg_ddr2_rw_phy_ctrl; -#define REG_RD_ADDR_ddr2_rw_phy_ctrl 16 -#define REG_WR_ADDR_ddr2_rw_phy_ctrl 16 - -/* Register rw_ctrl, scope ddr2, type rw */ -typedef struct { - unsigned int mrs_data : 16; - unsigned int cmd : 8; - unsigned int dummy1 : 8; -} reg_ddr2_rw_ctrl; -#define REG_RD_ADDR_ddr2_rw_ctrl 20 -#define REG_WR_ADDR_ddr2_rw_ctrl 20 - -/* Register rw_pwr_down, scope ddr2, type rw */ -typedef struct { - unsigned int self_ref : 2; - unsigned int phy_en : 1; - unsigned int dummy1 : 29; -} reg_ddr2_rw_pwr_down; -#define REG_RD_ADDR_ddr2_rw_pwr_down 24 -#define REG_WR_ADDR_ddr2_rw_pwr_down 24 - -/* Register r_stat, scope ddr2, type r */ -typedef struct { - unsigned int dll_lock : 1; - unsigned int dll_delay_code : 7; - unsigned int imp_cal_done : 1; - unsigned int imp_cal_fault : 1; - unsigned int cal_imp_pu : 4; - unsigned int cal_imp_pd : 4; - unsigned int dummy1 : 14; -} reg_ddr2_r_stat; -#define REG_RD_ADDR_ddr2_r_stat 28 - -/* Register rw_imp_ctrl, scope ddr2, type rw */ -typedef struct { - unsigned int imp_pu : 4; - unsigned int imp_pd : 4; - unsigned int dummy1 : 24; -} reg_ddr2_rw_imp_ctrl; -#define REG_RD_ADDR_ddr2_rw_imp_ctrl 32 -#define REG_WR_ADDR_ddr2_rw_imp_ctrl 32 - -#define STRIDE_ddr2_rw_dll_ctrl 4 -/* Register rw_dll_ctrl, scope ddr2, type rw */ -typedef struct { - unsigned int mode : 1; - unsigned int clk_delay : 7; - unsigned int dummy1 : 24; -} reg_ddr2_rw_dll_ctrl; -#define REG_RD_ADDR_ddr2_rw_dll_ctrl 36 -#define REG_WR_ADDR_ddr2_rw_dll_ctrl 36 - -#define STRIDE_ddr2_rw_dqs_dll_ctrl 4 -/* Register rw_dqs_dll_ctrl, scope ddr2, type rw */ -typedef struct { - unsigned int dqs90_delay : 7; - unsigned int dqs180_delay : 7; - unsigned int dqs270_delay : 7; - unsigned int dqs360_delay : 7; - unsigned int dummy1 : 4; -} reg_ddr2_rw_dqs_dll_ctrl; -#define REG_RD_ADDR_ddr2_rw_dqs_dll_ctrl 52 -#define REG_WR_ADDR_ddr2_rw_dqs_dll_ctrl 52 - - -/* Constants */ -enum { - regk_ddr2_al0 = 0x00000000, - regk_ddr2_al1 = 0x00000008, - regk_ddr2_al2 = 0x00000010, - regk_ddr2_al3 = 0x00000018, - regk_ddr2_al4 = 0x00000020, - regk_ddr2_auto = 0x00000003, - regk_ddr2_bank4 = 0x00000000, - regk_ddr2_bank8 = 0x00000001, - regk_ddr2_bl4 = 0x00000002, - regk_ddr2_bl8 = 0x00000003, - regk_ddr2_bt_il = 0x00000008, - regk_ddr2_bt_seq = 0x00000000, - regk_ddr2_bw16 = 0x00000001, - regk_ddr2_bw32 = 0x00000000, - regk_ddr2_cas2 = 0x00000020, - regk_ddr2_cas3 = 0x00000030, - regk_ddr2_cas4 = 0x00000040, - regk_ddr2_cas5 = 0x00000050, - regk_ddr2_deselect = 0x000000c0, - regk_ddr2_dic_weak = 0x00000002, - regk_ddr2_direct = 0x00000001, - regk_ddr2_dis = 0x00000000, - regk_ddr2_dll_dis = 0x00000001, - regk_ddr2_dll_en = 0x00000000, - regk_ddr2_dll_rst = 0x00000100, - regk_ddr2_emrs = 0x00000081, - regk_ddr2_emrs2 = 0x00000082, - regk_ddr2_emrs3 = 0x00000083, - regk_ddr2_full = 0x00000001, - regk_ddr2_hi_ref_rate = 0x00000080, - regk_ddr2_mrs = 0x00000080, - regk_ddr2_no = 0x00000000, - regk_ddr2_nop = 0x000000b8, - regk_ddr2_ocd_adj = 0x00000200, - regk_ddr2_ocd_default = 0x00000380, - regk_ddr2_ocd_drive0 = 0x00000100, - regk_ddr2_ocd_drive1 = 0x00000080, - regk_ddr2_ocd_exit = 0x00000000, - regk_ddr2_odt_dis = 0x00000000, - regk_ddr2_offs = 0x00000000, - regk_ddr2_pre = 0x00000090, - regk_ddr2_pre_all = 0x00000400, - regk_ddr2_pwr_down_fast = 0x00000000, - regk_ddr2_pwr_down_slow = 0x00001000, - regk_ddr2_ref = 0x00000088, - regk_ddr2_rtt150 = 0x00000040, - regk_ddr2_rtt50 = 0x00000044, - regk_ddr2_rtt75 = 0x00000004, - regk_ddr2_rw_cfg_default = 0x00186000, - regk_ddr2_rw_dll_ctrl_default = 0x00000000, - regk_ddr2_rw_dll_ctrl_size = 0x00000004, - regk_ddr2_rw_dqs_dll_ctrl_default = 0x00000000, - regk_ddr2_rw_dqs_dll_ctrl_size = 0x00000004, - regk_ddr2_rw_latency_default = 0x00000000, - regk_ddr2_rw_phy_cfg_default = 0x00000000, - regk_ddr2_rw_pwr_down_default = 0x00000000, - regk_ddr2_rw_timing_default = 0x00000000, - regk_ddr2_s1Gb = 0x0000001a, - regk_ddr2_s256Mb = 0x0000000f, - regk_ddr2_s2Gb = 0x00000027, - regk_ddr2_s4Gb = 0x00000042, - regk_ddr2_s512Mb = 0x00000015, - regk_ddr2_temp0_85 = 0x00000618, - regk_ddr2_temp85_95 = 0x0000030c, - regk_ddr2_term150 = 0x00000002, - regk_ddr2_term50 = 0x00000003, - regk_ddr2_term75 = 0x00000001, - regk_ddr2_test = 0x00000080, - regk_ddr2_weak = 0x00000000, - regk_ddr2_wr2 = 0x00000200, - regk_ddr2_wr3 = 0x00000400, - regk_ddr2_yes = 0x00000001 -}; -#endif /* __ddr2_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/gio_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/gio_defs.h deleted file mode 100644 index 5d88e0db23ae..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/gio_defs.h +++ /dev/null @@ -1,837 +0,0 @@ -#ifndef __gio_defs_h -#define __gio_defs_h - -/* - * This file is autogenerated from - * file: gio.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile gio_defs.h gio.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope gio */ - -/* Register r_pa_din, scope gio, type r */ -typedef struct { - unsigned int data : 32; -} reg_gio_r_pa_din; -#define REG_RD_ADDR_gio_r_pa_din 0 - -/* Register rw_pa_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 32; -} reg_gio_rw_pa_dout; -#define REG_RD_ADDR_gio_rw_pa_dout 4 -#define REG_WR_ADDR_gio_rw_pa_dout 4 - -/* Register rw_pa_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 32; -} reg_gio_rw_pa_oe; -#define REG_RD_ADDR_gio_rw_pa_oe 8 -#define REG_WR_ADDR_gio_rw_pa_oe 8 - -/* Register rw_pa_byte0_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_byte0_dout; -#define REG_RD_ADDR_gio_rw_pa_byte0_dout 12 -#define REG_WR_ADDR_gio_rw_pa_byte0_dout 12 - -/* Register rw_pa_byte0_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_byte0_oe; -#define REG_RD_ADDR_gio_rw_pa_byte0_oe 16 -#define REG_WR_ADDR_gio_rw_pa_byte0_oe 16 - -/* Register rw_pa_byte1_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_byte1_dout; -#define REG_RD_ADDR_gio_rw_pa_byte1_dout 20 -#define REG_WR_ADDR_gio_rw_pa_byte1_dout 20 - -/* Register rw_pa_byte1_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_byte1_oe; -#define REG_RD_ADDR_gio_rw_pa_byte1_oe 24 -#define REG_WR_ADDR_gio_rw_pa_byte1_oe 24 - -/* Register rw_pa_byte2_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_byte2_dout; -#define REG_RD_ADDR_gio_rw_pa_byte2_dout 28 -#define REG_WR_ADDR_gio_rw_pa_byte2_dout 28 - -/* Register rw_pa_byte2_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_byte2_oe; -#define REG_RD_ADDR_gio_rw_pa_byte2_oe 32 -#define REG_WR_ADDR_gio_rw_pa_byte2_oe 32 - -/* Register rw_pa_byte3_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_byte3_dout; -#define REG_RD_ADDR_gio_rw_pa_byte3_dout 36 -#define REG_WR_ADDR_gio_rw_pa_byte3_dout 36 - -/* Register rw_pa_byte3_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_byte3_oe; -#define REG_RD_ADDR_gio_rw_pa_byte3_oe 40 -#define REG_WR_ADDR_gio_rw_pa_byte3_oe 40 - -/* Register r_pb_din, scope gio, type r */ -typedef struct { - unsigned int data : 32; -} reg_gio_r_pb_din; -#define REG_RD_ADDR_gio_r_pb_din 44 - -/* Register rw_pb_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 32; -} reg_gio_rw_pb_dout; -#define REG_RD_ADDR_gio_rw_pb_dout 48 -#define REG_WR_ADDR_gio_rw_pb_dout 48 - -/* Register rw_pb_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 32; -} reg_gio_rw_pb_oe; -#define REG_RD_ADDR_gio_rw_pb_oe 52 -#define REG_WR_ADDR_gio_rw_pb_oe 52 - -/* Register rw_pb_byte0_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pb_byte0_dout; -#define REG_RD_ADDR_gio_rw_pb_byte0_dout 56 -#define REG_WR_ADDR_gio_rw_pb_byte0_dout 56 - -/* Register rw_pb_byte0_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pb_byte0_oe; -#define REG_RD_ADDR_gio_rw_pb_byte0_oe 60 -#define REG_WR_ADDR_gio_rw_pb_byte0_oe 60 - -/* Register rw_pb_byte1_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pb_byte1_dout; -#define REG_RD_ADDR_gio_rw_pb_byte1_dout 64 -#define REG_WR_ADDR_gio_rw_pb_byte1_dout 64 - -/* Register rw_pb_byte1_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pb_byte1_oe; -#define REG_RD_ADDR_gio_rw_pb_byte1_oe 68 -#define REG_WR_ADDR_gio_rw_pb_byte1_oe 68 - -/* Register rw_pb_byte2_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pb_byte2_dout; -#define REG_RD_ADDR_gio_rw_pb_byte2_dout 72 -#define REG_WR_ADDR_gio_rw_pb_byte2_dout 72 - -/* Register rw_pb_byte2_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pb_byte2_oe; -#define REG_RD_ADDR_gio_rw_pb_byte2_oe 76 -#define REG_WR_ADDR_gio_rw_pb_byte2_oe 76 - -/* Register rw_pb_byte3_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pb_byte3_dout; -#define REG_RD_ADDR_gio_rw_pb_byte3_dout 80 -#define REG_WR_ADDR_gio_rw_pb_byte3_dout 80 - -/* Register rw_pb_byte3_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pb_byte3_oe; -#define REG_RD_ADDR_gio_rw_pb_byte3_oe 84 -#define REG_WR_ADDR_gio_rw_pb_byte3_oe 84 - -/* Register r_pc_din, scope gio, type r */ -typedef struct { - unsigned int data : 16; - unsigned int dummy1 : 16; -} reg_gio_r_pc_din; -#define REG_RD_ADDR_gio_r_pc_din 88 - -/* Register rw_pc_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 16; - unsigned int dummy1 : 16; -} reg_gio_rw_pc_dout; -#define REG_RD_ADDR_gio_rw_pc_dout 92 -#define REG_WR_ADDR_gio_rw_pc_dout 92 - -/* Register rw_pc_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 16; - unsigned int dummy1 : 16; -} reg_gio_rw_pc_oe; -#define REG_RD_ADDR_gio_rw_pc_oe 96 -#define REG_WR_ADDR_gio_rw_pc_oe 96 - -/* Register rw_pc_byte0_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pc_byte0_dout; -#define REG_RD_ADDR_gio_rw_pc_byte0_dout 100 -#define REG_WR_ADDR_gio_rw_pc_byte0_dout 100 - -/* Register rw_pc_byte0_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pc_byte0_oe; -#define REG_RD_ADDR_gio_rw_pc_byte0_oe 104 -#define REG_WR_ADDR_gio_rw_pc_byte0_oe 104 - -/* Register rw_pc_byte1_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pc_byte1_dout; -#define REG_RD_ADDR_gio_rw_pc_byte1_dout 108 -#define REG_WR_ADDR_gio_rw_pc_byte1_dout 108 - -/* Register rw_pc_byte1_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pc_byte1_oe; -#define REG_RD_ADDR_gio_rw_pc_byte1_oe 112 -#define REG_WR_ADDR_gio_rw_pc_byte1_oe 112 - -/* Register r_pd_din, scope gio, type r */ -typedef struct { - unsigned int data : 32; -} reg_gio_r_pd_din; -#define REG_RD_ADDR_gio_r_pd_din 116 - -/* Register rw_intr_cfg, scope gio, type rw */ -typedef struct { - unsigned int intr0 : 3; - unsigned int intr1 : 3; - unsigned int intr2 : 3; - unsigned int intr3 : 3; - unsigned int intr4 : 3; - unsigned int intr5 : 3; - unsigned int intr6 : 3; - unsigned int intr7 : 3; - unsigned int dummy1 : 8; -} reg_gio_rw_intr_cfg; -#define REG_RD_ADDR_gio_rw_intr_cfg 120 -#define REG_WR_ADDR_gio_rw_intr_cfg 120 - -/* Register rw_intr_pins, scope gio, type rw */ -typedef struct { - unsigned int intr0 : 4; - unsigned int intr1 : 4; - unsigned int intr2 : 4; - unsigned int intr3 : 4; - unsigned int intr4 : 4; - unsigned int intr5 : 4; - unsigned int intr6 : 4; - unsigned int intr7 : 4; -} reg_gio_rw_intr_pins; -#define REG_RD_ADDR_gio_rw_intr_pins 124 -#define REG_WR_ADDR_gio_rw_intr_pins 124 - -/* Register rw_intr_mask, scope gio, type rw */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int i2c0_done : 1; - unsigned int i2c1_done : 1; - unsigned int dummy1 : 22; -} reg_gio_rw_intr_mask; -#define REG_RD_ADDR_gio_rw_intr_mask 128 -#define REG_WR_ADDR_gio_rw_intr_mask 128 - -/* Register rw_ack_intr, scope gio, type rw */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int i2c0_done : 1; - unsigned int i2c1_done : 1; - unsigned int dummy1 : 22; -} reg_gio_rw_ack_intr; -#define REG_RD_ADDR_gio_rw_ack_intr 132 -#define REG_WR_ADDR_gio_rw_ack_intr 132 - -/* Register r_intr, scope gio, type r */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int i2c0_done : 1; - unsigned int i2c1_done : 1; - unsigned int dummy1 : 22; -} reg_gio_r_intr; -#define REG_RD_ADDR_gio_r_intr 136 - -/* Register r_masked_intr, scope gio, type r */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int i2c0_done : 1; - unsigned int i2c1_done : 1; - unsigned int dummy1 : 22; -} reg_gio_r_masked_intr; -#define REG_RD_ADDR_gio_r_masked_intr 140 - -/* Register rw_i2c0_start, scope gio, type rw */ -typedef struct { - unsigned int run : 1; - unsigned int dummy1 : 31; -} reg_gio_rw_i2c0_start; -#define REG_RD_ADDR_gio_rw_i2c0_start 144 -#define REG_WR_ADDR_gio_rw_i2c0_start 144 - -/* Register rw_i2c0_cfg, scope gio, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int bit_order : 1; - unsigned int scl_io : 1; - unsigned int scl_inv : 1; - unsigned int sda_io : 1; - unsigned int sda_idle : 1; - unsigned int dummy1 : 26; -} reg_gio_rw_i2c0_cfg; -#define REG_RD_ADDR_gio_rw_i2c0_cfg 148 -#define REG_WR_ADDR_gio_rw_i2c0_cfg 148 - -/* Register rw_i2c0_ctrl, scope gio, type rw */ -typedef struct { - unsigned int trf_bits : 6; - unsigned int switch_dir : 6; - unsigned int extra_start : 3; - unsigned int early_end : 1; - unsigned int start_stop : 1; - unsigned int ack_dir0 : 1; - unsigned int ack_dir1 : 1; - unsigned int ack_dir2 : 1; - unsigned int ack_dir3 : 1; - unsigned int ack_dir4 : 1; - unsigned int ack_dir5 : 1; - unsigned int ack_bit : 1; - unsigned int start_bit : 1; - unsigned int freq : 2; - unsigned int dummy1 : 5; -} reg_gio_rw_i2c0_ctrl; -#define REG_RD_ADDR_gio_rw_i2c0_ctrl 152 -#define REG_WR_ADDR_gio_rw_i2c0_ctrl 152 - -/* Register rw_i2c0_data, scope gio, type rw */ -typedef struct { - unsigned int data0 : 8; - unsigned int data1 : 8; - unsigned int data2 : 8; - unsigned int data3 : 8; -} reg_gio_rw_i2c0_data; -#define REG_RD_ADDR_gio_rw_i2c0_data 156 -#define REG_WR_ADDR_gio_rw_i2c0_data 156 - -/* Register rw_i2c0_data2, scope gio, type rw */ -typedef struct { - unsigned int data4 : 8; - unsigned int data5 : 8; - unsigned int start_val : 6; - unsigned int ack_val : 6; - unsigned int dummy1 : 4; -} reg_gio_rw_i2c0_data2; -#define REG_RD_ADDR_gio_rw_i2c0_data2 160 -#define REG_WR_ADDR_gio_rw_i2c0_data2 160 - -/* Register rw_i2c1_start, scope gio, type rw */ -typedef struct { - unsigned int run : 1; - unsigned int dummy1 : 31; -} reg_gio_rw_i2c1_start; -#define REG_RD_ADDR_gio_rw_i2c1_start 164 -#define REG_WR_ADDR_gio_rw_i2c1_start 164 - -/* Register rw_i2c1_cfg, scope gio, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int bit_order : 1; - unsigned int scl_io : 1; - unsigned int scl_inv : 1; - unsigned int sda0_io : 1; - unsigned int sda0_idle : 1; - unsigned int sda1_io : 1; - unsigned int sda1_idle : 1; - unsigned int sda2_io : 1; - unsigned int sda2_idle : 1; - unsigned int sda3_io : 1; - unsigned int sda3_idle : 1; - unsigned int sda_sel : 2; - unsigned int sen_idle : 1; - unsigned int sen_inv : 1; - unsigned int sen_sel : 2; - unsigned int dummy1 : 14; -} reg_gio_rw_i2c1_cfg; -#define REG_RD_ADDR_gio_rw_i2c1_cfg 168 -#define REG_WR_ADDR_gio_rw_i2c1_cfg 168 - -/* Register rw_i2c1_ctrl, scope gio, type rw */ -typedef struct { - unsigned int trf_bits : 6; - unsigned int switch_dir : 6; - unsigned int extra_start : 3; - unsigned int early_end : 1; - unsigned int start_stop : 1; - unsigned int ack_dir0 : 1; - unsigned int ack_dir1 : 1; - unsigned int ack_dir2 : 1; - unsigned int ack_dir3 : 1; - unsigned int ack_dir4 : 1; - unsigned int ack_dir5 : 1; - unsigned int ack_bit : 1; - unsigned int start_bit : 1; - unsigned int freq : 2; - unsigned int dummy1 : 5; -} reg_gio_rw_i2c1_ctrl; -#define REG_RD_ADDR_gio_rw_i2c1_ctrl 172 -#define REG_WR_ADDR_gio_rw_i2c1_ctrl 172 - -/* Register rw_i2c1_data, scope gio, type rw */ -typedef struct { - unsigned int data0 : 8; - unsigned int data1 : 8; - unsigned int data2 : 8; - unsigned int data3 : 8; -} reg_gio_rw_i2c1_data; -#define REG_RD_ADDR_gio_rw_i2c1_data 176 -#define REG_WR_ADDR_gio_rw_i2c1_data 176 - -/* Register rw_i2c1_data2, scope gio, type rw */ -typedef struct { - unsigned int data4 : 8; - unsigned int data5 : 8; - unsigned int start_val : 6; - unsigned int ack_val : 6; - unsigned int dummy1 : 4; -} reg_gio_rw_i2c1_data2; -#define REG_RD_ADDR_gio_rw_i2c1_data2 180 -#define REG_WR_ADDR_gio_rw_i2c1_data2 180 - -/* Register r_ppwm_stat, scope gio, type r */ -typedef struct { - unsigned int freq : 2; - unsigned int dummy1 : 30; -} reg_gio_r_ppwm_stat; -#define REG_RD_ADDR_gio_r_ppwm_stat 184 - -/* Register rw_ppwm_data, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_ppwm_data; -#define REG_RD_ADDR_gio_rw_ppwm_data 188 -#define REG_WR_ADDR_gio_rw_ppwm_data 188 - -/* Register rw_pwm0_ctrl, scope gio, type rw */ -typedef struct { - unsigned int mode : 2; - unsigned int ccd_override : 1; - unsigned int ccd_val : 1; - unsigned int dummy1 : 28; -} reg_gio_rw_pwm0_ctrl; -#define REG_RD_ADDR_gio_rw_pwm0_ctrl 192 -#define REG_WR_ADDR_gio_rw_pwm0_ctrl 192 - -/* Register rw_pwm0_var, scope gio, type rw */ -typedef struct { - unsigned int lo : 13; - unsigned int hi : 13; - unsigned int dummy1 : 6; -} reg_gio_rw_pwm0_var; -#define REG_RD_ADDR_gio_rw_pwm0_var 196 -#define REG_WR_ADDR_gio_rw_pwm0_var 196 - -/* Register rw_pwm0_data, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pwm0_data; -#define REG_RD_ADDR_gio_rw_pwm0_data 200 -#define REG_WR_ADDR_gio_rw_pwm0_data 200 - -/* Register rw_pwm1_ctrl, scope gio, type rw */ -typedef struct { - unsigned int mode : 2; - unsigned int ccd_override : 1; - unsigned int ccd_val : 1; - unsigned int dummy1 : 28; -} reg_gio_rw_pwm1_ctrl; -#define REG_RD_ADDR_gio_rw_pwm1_ctrl 204 -#define REG_WR_ADDR_gio_rw_pwm1_ctrl 204 - -/* Register rw_pwm1_var, scope gio, type rw */ -typedef struct { - unsigned int lo : 13; - unsigned int hi : 13; - unsigned int dummy1 : 6; -} reg_gio_rw_pwm1_var; -#define REG_RD_ADDR_gio_rw_pwm1_var 208 -#define REG_WR_ADDR_gio_rw_pwm1_var 208 - -/* Register rw_pwm1_data, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pwm1_data; -#define REG_RD_ADDR_gio_rw_pwm1_data 212 -#define REG_WR_ADDR_gio_rw_pwm1_data 212 - -/* Register rw_pwm2_ctrl, scope gio, type rw */ -typedef struct { - unsigned int mode : 2; - unsigned int ccd_override : 1; - unsigned int ccd_val : 1; - unsigned int dummy1 : 28; -} reg_gio_rw_pwm2_ctrl; -#define REG_RD_ADDR_gio_rw_pwm2_ctrl 216 -#define REG_WR_ADDR_gio_rw_pwm2_ctrl 216 - -/* Register rw_pwm2_var, scope gio, type rw */ -typedef struct { - unsigned int lo : 13; - unsigned int hi : 13; - unsigned int dummy1 : 6; -} reg_gio_rw_pwm2_var; -#define REG_RD_ADDR_gio_rw_pwm2_var 220 -#define REG_WR_ADDR_gio_rw_pwm2_var 220 - -/* Register rw_pwm2_data, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pwm2_data; -#define REG_RD_ADDR_gio_rw_pwm2_data 224 -#define REG_WR_ADDR_gio_rw_pwm2_data 224 - -/* Register rw_pwm_in_cfg, scope gio, type rw */ -typedef struct { - unsigned int pin : 3; - unsigned int dummy1 : 29; -} reg_gio_rw_pwm_in_cfg; -#define REG_RD_ADDR_gio_rw_pwm_in_cfg 228 -#define REG_WR_ADDR_gio_rw_pwm_in_cfg 228 - -/* Register r_pwm_in_lo, scope gio, type r */ -typedef struct { - unsigned int data : 32; -} reg_gio_r_pwm_in_lo; -#define REG_RD_ADDR_gio_r_pwm_in_lo 232 - -/* Register r_pwm_in_hi, scope gio, type r */ -typedef struct { - unsigned int data : 32; -} reg_gio_r_pwm_in_hi; -#define REG_RD_ADDR_gio_r_pwm_in_hi 236 - -/* Register r_pwm_in_cnt, scope gio, type r */ -typedef struct { - unsigned int data : 32; -} reg_gio_r_pwm_in_cnt; -#define REG_RD_ADDR_gio_r_pwm_in_cnt 240 - - -/* Constants */ -enum { - regk_gio_anyedge = 0x00000007, - regk_gio_f100k = 0x00000000, - regk_gio_f1562 = 0x00000000, - regk_gio_f195 = 0x00000003, - regk_gio_f1m = 0x00000002, - regk_gio_f390 = 0x00000002, - regk_gio_f400k = 0x00000001, - regk_gio_f5m = 0x00000003, - regk_gio_f781 = 0x00000001, - regk_gio_hi = 0x00000001, - regk_gio_in = 0x00000000, - regk_gio_intr_pa0 = 0x00000000, - regk_gio_intr_pa1 = 0x00000000, - regk_gio_intr_pa10 = 0x00000001, - regk_gio_intr_pa11 = 0x00000001, - regk_gio_intr_pa12 = 0x00000001, - regk_gio_intr_pa13 = 0x00000001, - regk_gio_intr_pa14 = 0x00000001, - regk_gio_intr_pa15 = 0x00000001, - regk_gio_intr_pa16 = 0x00000002, - regk_gio_intr_pa17 = 0x00000002, - regk_gio_intr_pa18 = 0x00000002, - regk_gio_intr_pa19 = 0x00000002, - regk_gio_intr_pa2 = 0x00000000, - regk_gio_intr_pa20 = 0x00000002, - regk_gio_intr_pa21 = 0x00000002, - regk_gio_intr_pa22 = 0x00000002, - regk_gio_intr_pa23 = 0x00000002, - regk_gio_intr_pa24 = 0x00000003, - regk_gio_intr_pa25 = 0x00000003, - regk_gio_intr_pa26 = 0x00000003, - regk_gio_intr_pa27 = 0x00000003, - regk_gio_intr_pa28 = 0x00000003, - regk_gio_intr_pa29 = 0x00000003, - regk_gio_intr_pa3 = 0x00000000, - regk_gio_intr_pa30 = 0x00000003, - regk_gio_intr_pa31 = 0x00000003, - regk_gio_intr_pa4 = 0x00000000, - regk_gio_intr_pa5 = 0x00000000, - regk_gio_intr_pa6 = 0x00000000, - regk_gio_intr_pa7 = 0x00000000, - regk_gio_intr_pa8 = 0x00000001, - regk_gio_intr_pa9 = 0x00000001, - regk_gio_intr_pb0 = 0x00000004, - regk_gio_intr_pb1 = 0x00000004, - regk_gio_intr_pb10 = 0x00000005, - regk_gio_intr_pb11 = 0x00000005, - regk_gio_intr_pb12 = 0x00000005, - regk_gio_intr_pb13 = 0x00000005, - regk_gio_intr_pb14 = 0x00000005, - regk_gio_intr_pb15 = 0x00000005, - regk_gio_intr_pb16 = 0x00000006, - regk_gio_intr_pb17 = 0x00000006, - regk_gio_intr_pb18 = 0x00000006, - regk_gio_intr_pb19 = 0x00000006, - regk_gio_intr_pb2 = 0x00000004, - regk_gio_intr_pb20 = 0x00000006, - regk_gio_intr_pb21 = 0x00000006, - regk_gio_intr_pb22 = 0x00000006, - regk_gio_intr_pb23 = 0x00000006, - regk_gio_intr_pb24 = 0x00000007, - regk_gio_intr_pb25 = 0x00000007, - regk_gio_intr_pb26 = 0x00000007, - regk_gio_intr_pb27 = 0x00000007, - regk_gio_intr_pb28 = 0x00000007, - regk_gio_intr_pb29 = 0x00000007, - regk_gio_intr_pb3 = 0x00000004, - regk_gio_intr_pb30 = 0x00000007, - regk_gio_intr_pb31 = 0x00000007, - regk_gio_intr_pb4 = 0x00000004, - regk_gio_intr_pb5 = 0x00000004, - regk_gio_intr_pb6 = 0x00000004, - regk_gio_intr_pb7 = 0x00000004, - regk_gio_intr_pb8 = 0x00000005, - regk_gio_intr_pb9 = 0x00000005, - regk_gio_intr_pc0 = 0x00000008, - regk_gio_intr_pc1 = 0x00000008, - regk_gio_intr_pc10 = 0x00000009, - regk_gio_intr_pc11 = 0x00000009, - regk_gio_intr_pc12 = 0x00000009, - regk_gio_intr_pc13 = 0x00000009, - regk_gio_intr_pc14 = 0x00000009, - regk_gio_intr_pc15 = 0x00000009, - regk_gio_intr_pc2 = 0x00000008, - regk_gio_intr_pc3 = 0x00000008, - regk_gio_intr_pc4 = 0x00000008, - regk_gio_intr_pc5 = 0x00000008, - regk_gio_intr_pc6 = 0x00000008, - regk_gio_intr_pc7 = 0x00000008, - regk_gio_intr_pc8 = 0x00000009, - regk_gio_intr_pc9 = 0x00000009, - regk_gio_intr_pd0 = 0x0000000c, - regk_gio_intr_pd1 = 0x0000000c, - regk_gio_intr_pd10 = 0x0000000d, - regk_gio_intr_pd11 = 0x0000000d, - regk_gio_intr_pd12 = 0x0000000d, - regk_gio_intr_pd13 = 0x0000000d, - regk_gio_intr_pd14 = 0x0000000d, - regk_gio_intr_pd15 = 0x0000000d, - regk_gio_intr_pd16 = 0x0000000e, - regk_gio_intr_pd17 = 0x0000000e, - regk_gio_intr_pd18 = 0x0000000e, - regk_gio_intr_pd19 = 0x0000000e, - regk_gio_intr_pd2 = 0x0000000c, - regk_gio_intr_pd20 = 0x0000000e, - regk_gio_intr_pd21 = 0x0000000e, - regk_gio_intr_pd22 = 0x0000000e, - regk_gio_intr_pd23 = 0x0000000e, - regk_gio_intr_pd24 = 0x0000000f, - regk_gio_intr_pd25 = 0x0000000f, - regk_gio_intr_pd26 = 0x0000000f, - regk_gio_intr_pd27 = 0x0000000f, - regk_gio_intr_pd28 = 0x0000000f, - regk_gio_intr_pd29 = 0x0000000f, - regk_gio_intr_pd3 = 0x0000000c, - regk_gio_intr_pd30 = 0x0000000f, - regk_gio_intr_pd31 = 0x0000000f, - regk_gio_intr_pd4 = 0x0000000c, - regk_gio_intr_pd5 = 0x0000000c, - regk_gio_intr_pd6 = 0x0000000c, - regk_gio_intr_pd7 = 0x0000000c, - regk_gio_intr_pd8 = 0x0000000d, - regk_gio_intr_pd9 = 0x0000000d, - regk_gio_lo = 0x00000002, - regk_gio_lsb = 0x00000000, - regk_gio_msb = 0x00000001, - regk_gio_negedge = 0x00000006, - regk_gio_no = 0x00000000, - regk_gio_no_switch = 0x0000003f, - regk_gio_none = 0x00000007, - regk_gio_off = 0x00000000, - regk_gio_opendrain = 0x00000000, - regk_gio_out = 0x00000001, - regk_gio_posedge = 0x00000005, - regk_gio_pwm_hfp = 0x00000002, - regk_gio_pwm_pa0 = 0x00000001, - regk_gio_pwm_pa19 = 0x00000004, - regk_gio_pwm_pa6 = 0x00000002, - regk_gio_pwm_pa7 = 0x00000003, - regk_gio_pwm_pb26 = 0x00000005, - regk_gio_pwm_pd23 = 0x00000006, - regk_gio_pwm_pd31 = 0x00000007, - regk_gio_pwm_std = 0x00000001, - regk_gio_pwm_var = 0x00000003, - regk_gio_rw_i2c0_cfg_default = 0x00000020, - regk_gio_rw_i2c0_ctrl_default = 0x00010000, - regk_gio_rw_i2c0_start_default = 0x00000000, - regk_gio_rw_i2c1_cfg_default = 0x00000aa0, - regk_gio_rw_i2c1_ctrl_default = 0x00010000, - regk_gio_rw_i2c1_start_default = 0x00000000, - regk_gio_rw_intr_cfg_default = 0x00000000, - regk_gio_rw_intr_mask_default = 0x00000000, - regk_gio_rw_pa_oe_default = 0x00000000, - regk_gio_rw_pb_oe_default = 0x00000000, - regk_gio_rw_pc_oe_default = 0x00000000, - regk_gio_rw_ppwm_data_default = 0x00000000, - regk_gio_rw_pwm0_ctrl_default = 0x00000000, - regk_gio_rw_pwm1_ctrl_default = 0x00000000, - regk_gio_rw_pwm2_ctrl_default = 0x00000000, - regk_gio_rw_pwm_in_cfg_default = 0x00000000, - regk_gio_sda0 = 0x00000000, - regk_gio_sda1 = 0x00000001, - regk_gio_sda2 = 0x00000002, - regk_gio_sda3 = 0x00000003, - regk_gio_sen = 0x00000000, - regk_gio_set = 0x00000003, - regk_gio_yes = 0x00000001 -}; -#endif /* __gio_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect.h b/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect.h deleted file mode 100644 index bea699aa480e..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect.h +++ /dev/null @@ -1,46 +0,0 @@ -/* Interrupt vector numbers autogenerated by ../../../tools/rdesc/bin/rdes2intr - from intr_vect.r */ - -#ifndef _INTR_VECT_R -#define _INTR_VECT_R -#define TIMER0_INTR_VECT 0x31 -#define TIMER1_INTR_VECT 0x32 -#define DMA0_INTR_VECT 0x33 -#define DMA1_INTR_VECT 0x34 -#define DMA2_INTR_VECT 0x35 -#define DMA3_INTR_VECT 0x36 -#define DMA4_INTR_VECT 0x37 -#define DMA5_INTR_VECT 0x38 -#define DMA6_INTR_VECT 0x39 -#define DMA7_INTR_VECT 0x3a -#define DMA9_INTR_VECT 0x3b -#define DMA11_INTR_VECT 0x3c -#define GIO_INTR_VECT 0x3d -#define IOP0_INTR_VECT 0x3e -#define IOP1_INTR_VECT 0x3f -#define SER0_INTR_VECT 0x40 -#define SER1_INTR_VECT 0x41 -#define SER2_INTR_VECT 0x42 -#define SER3_INTR_VECT 0x43 -#define SER4_INTR_VECT 0x44 -#define SSER_INTR_VECT 0x45 -#define STRDMA0_INTR_VECT 0x46 -#define STRDMA1_INTR_VECT 0x47 -#define STRDMA2_INTR_VECT 0x48 -#define STRDMA3_INTR_VECT 0x49 -#define STRDMA5_INTR_VECT 0x4a -#define VIN_INTR_VECT 0x4b -#define VOUT_INTR_VECT 0x4c -#define JPEG_INTR_VECT 0x4d -#define H264_INTR_VECT 0x4e -#define HISTO_INTR_VECT 0x4f -#define CCD_INTR_VECT 0x50 -#define ETH_INTR_VECT 0x51 -#define MEMARB_BAR_INTR_VECT 0x52 -#define MEMARB_FOO_INTR_VECT 0x53 -#define PIO_INTR_VECT 0x54 -#define SCLR_INTR_VECT 0x55 -#define SCLR_FIFO_INTR_VECT 0x56 -#define IPI_INTR_VECT 0x57 -#define NBR_INTR_VECT 0x58 -#endif diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect_defs.h deleted file mode 100644 index b820f6347c74..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/intr_vect_defs.h +++ /dev/null @@ -1,341 +0,0 @@ -#ifndef __intr_vect_defs_h -#define __intr_vect_defs_h - -/* - * This file is autogenerated from - * file: intr_vect.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile intr_vect_defs.h intr_vect.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope intr_vect */ - - -#define STRIDE_intr_vect_rw_mask 4 -/* Register rw_mask0, scope intr_vect, type rw */ -typedef struct { - unsigned int timer0 : 1; - unsigned int timer1 : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma9 : 1; - unsigned int dma11 : 1; - unsigned int gio : 1; - unsigned int iop0 : 1; - unsigned int iop1 : 1; - unsigned int ser0 : 1; - unsigned int ser1 : 1; - unsigned int ser2 : 1; - unsigned int ser3 : 1; - unsigned int ser4 : 1; - unsigned int sser : 1; - unsigned int strdma0 : 1; - unsigned int strdma1 : 1; - unsigned int strdma2 : 1; - unsigned int strdma3 : 1; - unsigned int strdma5 : 1; - unsigned int vin : 1; - unsigned int vout : 1; - unsigned int jpeg : 1; - unsigned int h264 : 1; - unsigned int histo : 1; - unsigned int ccd : 1; -} reg_intr_vect_rw_mask0; -#define reg_intr_vect_rw_mask reg_intr_vect_rw_mask0 -#define REG_RD_ADDR_intr_vect_rw_mask 0 -#define REG_WR_ADDR_intr_vect_rw_mask 0 -#define REG_RD_ADDR_intr_vect_rw_mask0 0 -#define REG_WR_ADDR_intr_vect_rw_mask0 0 - -#define STRIDE_intr_vect_r_vect 4 -/* Register r_vect0, scope intr_vect, type r */ -typedef struct { - unsigned int timer0 : 1; - unsigned int timer1 : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma9 : 1; - unsigned int dma11 : 1; - unsigned int gio : 1; - unsigned int iop0 : 1; - unsigned int iop1 : 1; - unsigned int ser0 : 1; - unsigned int ser1 : 1; - unsigned int ser2 : 1; - unsigned int ser3 : 1; - unsigned int ser4 : 1; - unsigned int sser : 1; - unsigned int strdma0 : 1; - unsigned int strdma1 : 1; - unsigned int strdma2 : 1; - unsigned int strdma3 : 1; - unsigned int strdma5 : 1; - unsigned int vin : 1; - unsigned int vout : 1; - unsigned int jpeg : 1; - unsigned int h264 : 1; - unsigned int histo : 1; - unsigned int ccd : 1; -} reg_intr_vect_r_vect0; -#define reg_intr_vect_r_vect reg_intr_vect_r_vect0 -#define REG_RD_ADDR_intr_vect_r_vect 8 -#define REG_RD_ADDR_intr_vect_r_vect0 8 - -#define STRIDE_intr_vect_r_masked_vect 4 -/* Register r_masked_vect0, scope intr_vect, type r */ -typedef struct { - unsigned int timer0 : 1; - unsigned int timer1 : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma9 : 1; - unsigned int dma11 : 1; - unsigned int gio : 1; - unsigned int iop0 : 1; - unsigned int iop1 : 1; - unsigned int ser0 : 1; - unsigned int ser1 : 1; - unsigned int ser2 : 1; - unsigned int ser3 : 1; - unsigned int ser4 : 1; - unsigned int sser : 1; - unsigned int strdma0 : 1; - unsigned int strdma1 : 1; - unsigned int strdma2 : 1; - unsigned int strdma3 : 1; - unsigned int strdma5 : 1; - unsigned int vin : 1; - unsigned int vout : 1; - unsigned int jpeg : 1; - unsigned int h264 : 1; - unsigned int histo : 1; - unsigned int ccd : 1; -} reg_intr_vect_r_masked_vect0; -#define reg_intr_vect_r_masked_vect reg_intr_masked_vect_r_vect0 -#define REG_RD_ADDR_intr_vect_r_masked_vect0 16 -#define REG_RD_ADDR_intr_vect_r_masked_vect 16 - -#define STRIDE_intr_vect_rw_xmask 4 -/* Register rw_xmask0, scope intr_vect, type rw */ -typedef struct { - unsigned int timer0 : 1; - unsigned int timer1 : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma9 : 1; - unsigned int dma11 : 1; - unsigned int gio : 1; - unsigned int iop0 : 1; - unsigned int iop1 : 1; - unsigned int ser0 : 1; - unsigned int ser1 : 1; - unsigned int ser2 : 1; - unsigned int ser3 : 1; - unsigned int ser4 : 1; - unsigned int sser : 1; - unsigned int strdma0 : 1; - unsigned int strdma1 : 1; - unsigned int strdma2 : 1; - unsigned int strdma3 : 1; - unsigned int strdma5 : 1; - unsigned int vin : 1; - unsigned int vout : 1; - unsigned int jpeg : 1; - unsigned int h264 : 1; - unsigned int histo : 1; - unsigned int ccd : 1; -} reg_intr_vect_rw_xmask0; -#define reg_intr_vect_rw_xmask reg_intr_vect_rw_xmask0 -#define REG_RD_ADDR_intr_vect_rw_xmask0 24 -#define REG_WR_ADDR_intr_vect_rw_xmask0 24 -#define REG_RD_ADDR_intr_vect_rw_xmask 24 -#define REG_WR_ADDR_intr_vect_rw_xmask 24 - -/* Register rw_mask1, scope intr_vect, type rw */ -typedef struct { - unsigned int eth : 1; - unsigned int memarb_bar : 1; - unsigned int memarb_foo : 1; - unsigned int pio : 1; - unsigned int sclr : 1; - unsigned int sclr_fifo : 1; - unsigned int dummy1 : 26; -} reg_intr_vect_rw_mask1; -#define REG_RD_ADDR_intr_vect_rw_mask1 4 -#define REG_WR_ADDR_intr_vect_rw_mask1 4 - -/* Register r_vect1, scope intr_vect, type r */ -typedef struct { - unsigned int eth : 1; - unsigned int memarb_bar : 1; - unsigned int memarb_foo : 1; - unsigned int pio : 1; - unsigned int sclr : 1; - unsigned int sclr_fifo : 1; - unsigned int dummy1 : 26; -} reg_intr_vect_r_vect1; -#define REG_RD_ADDR_intr_vect_r_vect1 12 - -/* Register r_masked_vect1, scope intr_vect, type r */ -typedef struct { - unsigned int eth : 1; - unsigned int memarb_bar : 1; - unsigned int memarb_foo : 1; - unsigned int pio : 1; - unsigned int sclr : 1; - unsigned int sclr_fifo : 1; - unsigned int dummy1 : 26; -} reg_intr_vect_r_masked_vect1; -#define REG_RD_ADDR_intr_vect_r_masked_vect1 20 - -/* Register rw_xmask1, scope intr_vect, type rw */ -typedef struct { - unsigned int eth : 1; - unsigned int memarb_bar : 1; - unsigned int memarb_foo : 1; - unsigned int pio : 1; - unsigned int sclr : 1; - unsigned int sclr_fifo : 1; - unsigned int dummy1 : 26; -} reg_intr_vect_rw_xmask1; -#define REG_RD_ADDR_intr_vect_rw_xmask1 28 -#define REG_WR_ADDR_intr_vect_rw_xmask1 28 - -/* Register rw_xmask_ctrl, scope intr_vect, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int dummy1 : 31; -} reg_intr_vect_rw_xmask_ctrl; -#define REG_RD_ADDR_intr_vect_rw_xmask_ctrl 32 -#define REG_WR_ADDR_intr_vect_rw_xmask_ctrl 32 - -/* Register r_nmi, scope intr_vect, type r */ -typedef struct { - unsigned int watchdog0 : 1; - unsigned int watchdog1 : 1; - unsigned int dummy1 : 30; -} reg_intr_vect_r_nmi; -#define REG_RD_ADDR_intr_vect_r_nmi 64 - -/* Register r_guru, scope intr_vect, type r */ -typedef struct { - unsigned int jtag : 1; - unsigned int dummy1 : 31; -} reg_intr_vect_r_guru; -#define REG_RD_ADDR_intr_vect_r_guru 68 - - -/* Register rw_ipi, scope intr_vect, type rw */ -typedef struct -{ - unsigned int vector; -} reg_intr_vect_rw_ipi; -#define REG_RD_ADDR_intr_vect_rw_ipi 72 -#define REG_WR_ADDR_intr_vect_rw_ipi 72 - -/* Constants */ -enum { - regk_intr_vect_no = 0x00000000, - regk_intr_vect_rw_mask0_default = 0x00000000, - regk_intr_vect_rw_mask1_default = 0x00000000, - regk_intr_vect_rw_xmask0_default = 0x00000000, - regk_intr_vect_rw_xmask1_default = 0x00000000, - regk_intr_vect_rw_xmask_ctrl_default = 0x00000000, - regk_intr_vect_yes = 0x00000001 -}; -#endif /* __intr_vect_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_reg_space_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_reg_space_asm.h deleted file mode 100644 index d75a74e90458..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_reg_space_asm.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Autogenerated Changes here will be lost! - * generated by ./gen_sw.pl Wed Feb 14 09:27:48 2007 iop_sw.cfg - */ -#define iop_version 0 -#define iop_fifo_in_extra 64 -#define iop_fifo_out_extra 128 -#define iop_trigger_grp0 192 -#define iop_trigger_grp1 256 -#define iop_trigger_grp2 320 -#define iop_trigger_grp3 384 -#define iop_trigger_grp4 448 -#define iop_trigger_grp5 512 -#define iop_trigger_grp6 576 -#define iop_trigger_grp7 640 -#define iop_crc_par 768 -#define iop_dmc_in 896 -#define iop_dmc_out 1024 -#define iop_fifo_in 1152 -#define iop_fifo_out 1280 -#define iop_scrc_in 1408 -#define iop_scrc_out 1536 -#define iop_timer_grp0 1664 -#define iop_timer_grp1 1792 -#define iop_sap_in 2048 -#define iop_sap_out 2304 -#define iop_spu 2560 -#define iop_sw_cfg 2816 -#define iop_sw_cpu 3072 -#define iop_sw_mpu 3328 -#define iop_sw_spu 3584 -#define iop_mpu 4096 diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_in_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_in_defs_asm.h deleted file mode 100644 index 7f90b5a0460d..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_in_defs_asm.h +++ /dev/null @@ -1,109 +0,0 @@ -#ifndef __iop_sap_in_defs_asm_h -#define __iop_sap_in_defs_asm_h - -/* - * This file is autogenerated from - * file: iop_sap_in.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sap_in_defs_asm.h iop_sap_in.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -#define STRIDE_iop_sap_in_rw_bus_byte 4 -/* Register rw_bus_byte, scope iop_sap_in, type rw */ -#define reg_iop_sap_in_rw_bus_byte___sync_sel___lsb 0 -#define reg_iop_sap_in_rw_bus_byte___sync_sel___width 2 -#define reg_iop_sap_in_rw_bus_byte___sync_ext_src___lsb 2 -#define reg_iop_sap_in_rw_bus_byte___sync_ext_src___width 3 -#define reg_iop_sap_in_rw_bus_byte___sync_edge___lsb 5 -#define reg_iop_sap_in_rw_bus_byte___sync_edge___width 2 -#define reg_iop_sap_in_rw_bus_byte___delay___lsb 7 -#define reg_iop_sap_in_rw_bus_byte___delay___width 2 -#define reg_iop_sap_in_rw_bus_byte_offset 0 - -#define STRIDE_iop_sap_in_rw_gio 4 -/* Register rw_gio, scope iop_sap_in, type rw */ -#define reg_iop_sap_in_rw_gio___sync_sel___lsb 0 -#define reg_iop_sap_in_rw_gio___sync_sel___width 2 -#define reg_iop_sap_in_rw_gio___sync_ext_src___lsb 2 -#define reg_iop_sap_in_rw_gio___sync_ext_src___width 3 -#define reg_iop_sap_in_rw_gio___sync_edge___lsb 5 -#define reg_iop_sap_in_rw_gio___sync_edge___width 2 -#define reg_iop_sap_in_rw_gio___delay___lsb 7 -#define reg_iop_sap_in_rw_gio___delay___width 2 -#define reg_iop_sap_in_rw_gio___logic___lsb 9 -#define reg_iop_sap_in_rw_gio___logic___width 2 -#define reg_iop_sap_in_rw_gio_offset 16 - - -/* Constants */ -#define regk_iop_sap_in_and 0x00000002 -#define regk_iop_sap_in_ext_clk200 0x00000003 -#define regk_iop_sap_in_gio0 0x00000000 -#define regk_iop_sap_in_gio12 0x00000003 -#define regk_iop_sap_in_gio16 0x00000004 -#define regk_iop_sap_in_gio20 0x00000005 -#define regk_iop_sap_in_gio24 0x00000006 -#define regk_iop_sap_in_gio28 0x00000007 -#define regk_iop_sap_in_gio4 0x00000001 -#define regk_iop_sap_in_gio8 0x00000002 -#define regk_iop_sap_in_inv 0x00000001 -#define regk_iop_sap_in_neg 0x00000002 -#define regk_iop_sap_in_no 0x00000000 -#define regk_iop_sap_in_no_del_ext_clk200 0x00000002 -#define regk_iop_sap_in_none 0x00000000 -#define regk_iop_sap_in_one 0x00000001 -#define regk_iop_sap_in_or 0x00000003 -#define regk_iop_sap_in_pos 0x00000001 -#define regk_iop_sap_in_pos_neg 0x00000003 -#define regk_iop_sap_in_rw_bus_byte_default 0x00000000 -#define regk_iop_sap_in_rw_bus_byte_size 0x00000004 -#define regk_iop_sap_in_rw_gio_default 0x00000000 -#define regk_iop_sap_in_rw_gio_size 0x00000020 -#define regk_iop_sap_in_timer_grp0_tmr3 0x00000000 -#define regk_iop_sap_in_timer_grp1_tmr3 0x00000001 -#define regk_iop_sap_in_tmr_clk200 0x00000001 -#define regk_iop_sap_in_two 0x00000002 -#define regk_iop_sap_in_two_clk200 0x00000000 -#endif /* __iop_sap_in_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_out_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_out_defs_asm.h deleted file mode 100644 index 399bd656406b..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sap_out_defs_asm.h +++ /dev/null @@ -1,276 +0,0 @@ -#ifndef __iop_sap_out_defs_asm_h -#define __iop_sap_out_defs_asm_h - -/* - * This file is autogenerated from - * file: iop_sap_out.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sap_out_defs_asm.h iop_sap_out.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_gen_gated, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_gen_gated___clk0_src___lsb 0 -#define reg_iop_sap_out_rw_gen_gated___clk0_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk0_gate_src___lsb 2 -#define reg_iop_sap_out_rw_gen_gated___clk0_gate_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk0_force_src___lsb 4 -#define reg_iop_sap_out_rw_gen_gated___clk0_force_src___width 3 -#define reg_iop_sap_out_rw_gen_gated___clk1_src___lsb 7 -#define reg_iop_sap_out_rw_gen_gated___clk1_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk1_gate_src___lsb 9 -#define reg_iop_sap_out_rw_gen_gated___clk1_gate_src___width 2 -#define reg_iop_sap_out_rw_gen_gated___clk1_force_src___lsb 11 -#define reg_iop_sap_out_rw_gen_gated___clk1_force_src___width 3 -#define reg_iop_sap_out_rw_gen_gated_offset 0 - -/* Register rw_bus, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_bus___byte0_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_bus___byte0_clk_sel___width 2 -#define reg_iop_sap_out_rw_bus___byte0_clk_ext___lsb 2 -#define reg_iop_sap_out_rw_bus___byte0_clk_ext___width 2 -#define reg_iop_sap_out_rw_bus___byte0_gated_clk___lsb 4 -#define reg_iop_sap_out_rw_bus___byte0_gated_clk___width 1 -#define reg_iop_sap_out_rw_bus___byte0_gated_clk___bit 4 -#define reg_iop_sap_out_rw_bus___byte0_clk_inv___lsb 5 -#define reg_iop_sap_out_rw_bus___byte0_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus___byte0_clk_inv___bit 5 -#define reg_iop_sap_out_rw_bus___byte0_delay___lsb 6 -#define reg_iop_sap_out_rw_bus___byte0_delay___width 1 -#define reg_iop_sap_out_rw_bus___byte0_delay___bit 6 -#define reg_iop_sap_out_rw_bus___byte1_clk_sel___lsb 7 -#define reg_iop_sap_out_rw_bus___byte1_clk_sel___width 2 -#define reg_iop_sap_out_rw_bus___byte1_clk_ext___lsb 9 -#define reg_iop_sap_out_rw_bus___byte1_clk_ext___width 2 -#define reg_iop_sap_out_rw_bus___byte1_gated_clk___lsb 11 -#define reg_iop_sap_out_rw_bus___byte1_gated_clk___width 1 -#define reg_iop_sap_out_rw_bus___byte1_gated_clk___bit 11 -#define reg_iop_sap_out_rw_bus___byte1_clk_inv___lsb 12 -#define reg_iop_sap_out_rw_bus___byte1_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus___byte1_clk_inv___bit 12 -#define reg_iop_sap_out_rw_bus___byte1_delay___lsb 13 -#define reg_iop_sap_out_rw_bus___byte1_delay___width 1 -#define reg_iop_sap_out_rw_bus___byte1_delay___bit 13 -#define reg_iop_sap_out_rw_bus___byte2_clk_sel___lsb 14 -#define reg_iop_sap_out_rw_bus___byte2_clk_sel___width 2 -#define reg_iop_sap_out_rw_bus___byte2_clk_ext___lsb 16 -#define reg_iop_sap_out_rw_bus___byte2_clk_ext___width 2 -#define reg_iop_sap_out_rw_bus___byte2_gated_clk___lsb 18 -#define reg_iop_sap_out_rw_bus___byte2_gated_clk___width 1 -#define reg_iop_sap_out_rw_bus___byte2_gated_clk___bit 18 -#define reg_iop_sap_out_rw_bus___byte2_clk_inv___lsb 19 -#define reg_iop_sap_out_rw_bus___byte2_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus___byte2_clk_inv___bit 19 -#define reg_iop_sap_out_rw_bus___byte2_delay___lsb 20 -#define reg_iop_sap_out_rw_bus___byte2_delay___width 1 -#define reg_iop_sap_out_rw_bus___byte2_delay___bit 20 -#define reg_iop_sap_out_rw_bus___byte3_clk_sel___lsb 21 -#define reg_iop_sap_out_rw_bus___byte3_clk_sel___width 2 -#define reg_iop_sap_out_rw_bus___byte3_clk_ext___lsb 23 -#define reg_iop_sap_out_rw_bus___byte3_clk_ext___width 2 -#define reg_iop_sap_out_rw_bus___byte3_gated_clk___lsb 25 -#define reg_iop_sap_out_rw_bus___byte3_gated_clk___width 1 -#define reg_iop_sap_out_rw_bus___byte3_gated_clk___bit 25 -#define reg_iop_sap_out_rw_bus___byte3_clk_inv___lsb 26 -#define reg_iop_sap_out_rw_bus___byte3_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus___byte3_clk_inv___bit 26 -#define reg_iop_sap_out_rw_bus___byte3_delay___lsb 27 -#define reg_iop_sap_out_rw_bus___byte3_delay___width 1 -#define reg_iop_sap_out_rw_bus___byte3_delay___bit 27 -#define reg_iop_sap_out_rw_bus_offset 4 - -/* Register rw_bus_lo_oe, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_sel___width 2 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_ext___lsb 2 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_ext___width 2 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_gated_clk___lsb 4 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_gated_clk___width 1 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_gated_clk___bit 4 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_inv___lsb 5 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_clk_inv___bit 5 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_delay___lsb 6 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_delay___width 1 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_delay___bit 6 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic___lsb 7 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic___width 2 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic_src___lsb 9 -#define reg_iop_sap_out_rw_bus_lo_oe___byte0_logic_src___width 2 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_sel___lsb 11 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_sel___width 2 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_ext___lsb 13 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_ext___width 2 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_gated_clk___lsb 15 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_gated_clk___width 1 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_gated_clk___bit 15 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_inv___lsb 16 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_clk_inv___bit 16 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_delay___lsb 17 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_delay___width 1 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_delay___bit 17 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic___lsb 18 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic___width 2 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic_src___lsb 20 -#define reg_iop_sap_out_rw_bus_lo_oe___byte1_logic_src___width 2 -#define reg_iop_sap_out_rw_bus_lo_oe_offset 8 - -/* Register rw_bus_hi_oe, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_sel___width 2 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_ext___lsb 2 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_ext___width 2 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_gated_clk___lsb 4 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_gated_clk___width 1 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_gated_clk___bit 4 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_inv___lsb 5 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_clk_inv___bit 5 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_delay___lsb 6 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_delay___width 1 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_delay___bit 6 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic___lsb 7 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic___width 2 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic_src___lsb 9 -#define reg_iop_sap_out_rw_bus_hi_oe___byte2_logic_src___width 2 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_sel___lsb 11 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_sel___width 2 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_ext___lsb 13 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_ext___width 2 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_gated_clk___lsb 15 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_gated_clk___width 1 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_gated_clk___bit 15 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_inv___lsb 16 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_inv___width 1 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_clk_inv___bit 16 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_delay___lsb 17 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_delay___width 1 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_delay___bit 17 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic___lsb 18 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic___width 2 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic_src___lsb 20 -#define reg_iop_sap_out_rw_bus_hi_oe___byte3_logic_src___width 2 -#define reg_iop_sap_out_rw_bus_hi_oe_offset 12 - -#define STRIDE_iop_sap_out_rw_gio 4 -/* Register rw_gio, scope iop_sap_out, type rw */ -#define reg_iop_sap_out_rw_gio___out_clk_sel___lsb 0 -#define reg_iop_sap_out_rw_gio___out_clk_sel___width 3 -#define reg_iop_sap_out_rw_gio___out_clk_ext___lsb 3 -#define reg_iop_sap_out_rw_gio___out_clk_ext___width 2 -#define reg_iop_sap_out_rw_gio___out_gated_clk___lsb 5 -#define reg_iop_sap_out_rw_gio___out_gated_clk___width 1 -#define reg_iop_sap_out_rw_gio___out_gated_clk___bit 5 -#define reg_iop_sap_out_rw_gio___out_clk_inv___lsb 6 -#define reg_iop_sap_out_rw_gio___out_clk_inv___width 1 -#define reg_iop_sap_out_rw_gio___out_clk_inv___bit 6 -#define reg_iop_sap_out_rw_gio___out_delay___lsb 7 -#define reg_iop_sap_out_rw_gio___out_delay___width 1 -#define reg_iop_sap_out_rw_gio___out_delay___bit 7 -#define reg_iop_sap_out_rw_gio___out_logic___lsb 8 -#define reg_iop_sap_out_rw_gio___out_logic___width 2 -#define reg_iop_sap_out_rw_gio___out_logic_src___lsb 10 -#define reg_iop_sap_out_rw_gio___out_logic_src___width 2 -#define reg_iop_sap_out_rw_gio___oe_clk_sel___lsb 12 -#define reg_iop_sap_out_rw_gio___oe_clk_sel___width 3 -#define reg_iop_sap_out_rw_gio___oe_clk_ext___lsb 15 -#define reg_iop_sap_out_rw_gio___oe_clk_ext___width 2 -#define reg_iop_sap_out_rw_gio___oe_gated_clk___lsb 17 -#define reg_iop_sap_out_rw_gio___oe_gated_clk___width 1 -#define reg_iop_sap_out_rw_gio___oe_gated_clk___bit 17 -#define reg_iop_sap_out_rw_gio___oe_clk_inv___lsb 18 -#define reg_iop_sap_out_rw_gio___oe_clk_inv___width 1 -#define reg_iop_sap_out_rw_gio___oe_clk_inv___bit 18 -#define reg_iop_sap_out_rw_gio___oe_delay___lsb 19 -#define reg_iop_sap_out_rw_gio___oe_delay___width 1 -#define reg_iop_sap_out_rw_gio___oe_delay___bit 19 -#define reg_iop_sap_out_rw_gio___oe_logic___lsb 20 -#define reg_iop_sap_out_rw_gio___oe_logic___width 2 -#define reg_iop_sap_out_rw_gio___oe_logic_src___lsb 22 -#define reg_iop_sap_out_rw_gio___oe_logic_src___width 2 -#define reg_iop_sap_out_rw_gio_offset 16 - - -/* Constants */ -#define regk_iop_sap_out_always 0x00000001 -#define regk_iop_sap_out_and 0x00000002 -#define regk_iop_sap_out_clk0 0x00000000 -#define regk_iop_sap_out_clk1 0x00000001 -#define regk_iop_sap_out_clk12 0x00000004 -#define regk_iop_sap_out_clk200 0x00000000 -#define regk_iop_sap_out_ext 0x00000002 -#define regk_iop_sap_out_gated 0x00000003 -#define regk_iop_sap_out_gio0 0x00000000 -#define regk_iop_sap_out_gio1 0x00000000 -#define regk_iop_sap_out_gio16 0x00000002 -#define regk_iop_sap_out_gio17 0x00000002 -#define regk_iop_sap_out_gio24 0x00000003 -#define regk_iop_sap_out_gio25 0x00000003 -#define regk_iop_sap_out_gio8 0x00000001 -#define regk_iop_sap_out_gio9 0x00000001 -#define regk_iop_sap_out_gio_out10 0x00000005 -#define regk_iop_sap_out_gio_out18 0x00000006 -#define regk_iop_sap_out_gio_out2 0x00000004 -#define regk_iop_sap_out_gio_out26 0x00000007 -#define regk_iop_sap_out_inv 0x00000001 -#define regk_iop_sap_out_nand 0x00000003 -#define regk_iop_sap_out_no 0x00000000 -#define regk_iop_sap_out_none 0x00000000 -#define regk_iop_sap_out_one 0x00000001 -#define regk_iop_sap_out_rw_bus_default 0x00000000 -#define regk_iop_sap_out_rw_bus_hi_oe_default 0x00000000 -#define regk_iop_sap_out_rw_bus_lo_oe_default 0x00000000 -#define regk_iop_sap_out_rw_gen_gated_default 0x00000000 -#define regk_iop_sap_out_rw_gio_default 0x00000000 -#define regk_iop_sap_out_rw_gio_size 0x00000020 -#define regk_iop_sap_out_spu_gio6 0x00000002 -#define regk_iop_sap_out_spu_gio7 0x00000003 -#define regk_iop_sap_out_timer_grp0_tmr2 0x00000000 -#define regk_iop_sap_out_timer_grp0_tmr3 0x00000001 -#define regk_iop_sap_out_timer_grp1_tmr2 0x00000002 -#define regk_iop_sap_out_timer_grp1_tmr3 0x00000003 -#define regk_iop_sap_out_tmr200 0x00000001 -#define regk_iop_sap_out_yes 0x00000001 -#endif /* __iop_sap_out_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cfg_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cfg_defs_asm.h deleted file mode 100644 index 3b3949b51a66..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cfg_defs_asm.h +++ /dev/null @@ -1,739 +0,0 @@ -#ifndef __iop_sw_cfg_defs_asm_h -#define __iop_sw_cfg_defs_asm_h - -/* - * This file is autogenerated from - * file: iop_sw_cfg.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_cfg_defs_asm.h iop_sw_cfg.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_crc_par_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_crc_par_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_crc_par_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_crc_par_owner_offset 0 - -/* Register rw_dmc_in_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_dmc_in_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_dmc_in_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_dmc_in_owner_offset 4 - -/* Register rw_dmc_out_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_dmc_out_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_dmc_out_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_dmc_out_owner_offset 8 - -/* Register rw_fifo_in_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_in_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_in_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_in_owner_offset 12 - -/* Register rw_fifo_in_extra_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_in_extra_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_in_extra_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_in_extra_owner_offset 16 - -/* Register rw_fifo_out_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_out_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_out_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_out_owner_offset 20 - -/* Register rw_fifo_out_extra_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_fifo_out_extra_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_fifo_out_extra_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_fifo_out_extra_owner_offset 24 - -/* Register rw_sap_in_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_sap_in_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_sap_in_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_sap_in_owner_offset 28 - -/* Register rw_sap_out_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_sap_out_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_sap_out_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_sap_out_owner_offset 32 - -/* Register rw_scrc_in_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_scrc_in_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_scrc_in_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_scrc_in_owner_offset 36 - -/* Register rw_scrc_out_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_scrc_out_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_scrc_out_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_scrc_out_owner_offset 40 - -/* Register rw_spu_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_spu_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_spu_owner___cfg___width 1 -#define reg_iop_sw_cfg_rw_spu_owner___cfg___bit 0 -#define reg_iop_sw_cfg_rw_spu_owner_offset 44 - -/* Register rw_timer_grp0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_timer_grp0_owner_offset 48 - -/* Register rw_timer_grp1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_timer_grp1_owner_offset 52 - -/* Register rw_trigger_grp0_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp0_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp0_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp0_owner_offset 56 - -/* Register rw_trigger_grp1_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp1_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp1_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp1_owner_offset 60 - -/* Register rw_trigger_grp2_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp2_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp2_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp2_owner_offset 64 - -/* Register rw_trigger_grp3_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp3_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp3_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp3_owner_offset 68 - -/* Register rw_trigger_grp4_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp4_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp4_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp4_owner_offset 72 - -/* Register rw_trigger_grp5_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp5_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp5_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp5_owner_offset 76 - -/* Register rw_trigger_grp6_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp6_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp6_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp6_owner_offset 80 - -/* Register rw_trigger_grp7_owner, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grp7_owner___cfg___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grp7_owner___cfg___width 2 -#define reg_iop_sw_cfg_rw_trigger_grp7_owner_offset 84 - -/* Register rw_bus_mask, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_bus_mask___byte0___lsb 0 -#define reg_iop_sw_cfg_rw_bus_mask___byte0___width 8 -#define reg_iop_sw_cfg_rw_bus_mask___byte1___lsb 8 -#define reg_iop_sw_cfg_rw_bus_mask___byte1___width 8 -#define reg_iop_sw_cfg_rw_bus_mask___byte2___lsb 16 -#define reg_iop_sw_cfg_rw_bus_mask___byte2___width 8 -#define reg_iop_sw_cfg_rw_bus_mask___byte3___lsb 24 -#define reg_iop_sw_cfg_rw_bus_mask___byte3___width 8 -#define reg_iop_sw_cfg_rw_bus_mask_offset 88 - -/* Register rw_bus_oe_mask, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte0___lsb 0 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte0___width 1 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte0___bit 0 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte1___lsb 1 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte1___width 1 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte1___bit 1 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte2___lsb 2 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte2___width 1 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte2___bit 2 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte3___lsb 3 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte3___width 1 -#define reg_iop_sw_cfg_rw_bus_oe_mask___byte3___bit 3 -#define reg_iop_sw_cfg_rw_bus_oe_mask_offset 92 - -/* Register rw_gio_mask, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_mask___val___lsb 0 -#define reg_iop_sw_cfg_rw_gio_mask___val___width 32 -#define reg_iop_sw_cfg_rw_gio_mask_offset 96 - -/* Register rw_gio_oe_mask, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_oe_mask___val___lsb 0 -#define reg_iop_sw_cfg_rw_gio_oe_mask___val___width 32 -#define reg_iop_sw_cfg_rw_gio_oe_mask_offset 100 - -/* Register rw_pinmapping, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_pinmapping___bus_byte0___lsb 0 -#define reg_iop_sw_cfg_rw_pinmapping___bus_byte0___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus_byte1___lsb 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus_byte1___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus_byte2___lsb 4 -#define reg_iop_sw_cfg_rw_pinmapping___bus_byte2___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___bus_byte3___lsb 6 -#define reg_iop_sw_cfg_rw_pinmapping___bus_byte3___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio3_0___lsb 8 -#define reg_iop_sw_cfg_rw_pinmapping___gio3_0___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio7_4___lsb 10 -#define reg_iop_sw_cfg_rw_pinmapping___gio7_4___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio11_8___lsb 12 -#define reg_iop_sw_cfg_rw_pinmapping___gio11_8___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio15_12___lsb 14 -#define reg_iop_sw_cfg_rw_pinmapping___gio15_12___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio19_16___lsb 16 -#define reg_iop_sw_cfg_rw_pinmapping___gio19_16___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio23_20___lsb 18 -#define reg_iop_sw_cfg_rw_pinmapping___gio23_20___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio27_24___lsb 20 -#define reg_iop_sw_cfg_rw_pinmapping___gio27_24___width 2 -#define reg_iop_sw_cfg_rw_pinmapping___gio31_28___lsb 22 -#define reg_iop_sw_cfg_rw_pinmapping___gio31_28___width 2 -#define reg_iop_sw_cfg_rw_pinmapping_offset 104 - -/* Register rw_bus_out_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo___lsb 0 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo___width 2 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi___lsb 2 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi___width 2 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo_oe___lsb 4 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_lo_oe___width 2 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi_oe___lsb 6 -#define reg_iop_sw_cfg_rw_bus_out_cfg___bus_hi_oe___width 2 -#define reg_iop_sw_cfg_rw_bus_out_cfg_offset 108 - -/* Register rw_gio_out_grp0_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___lsb 3 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio0_oe___bit 3 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___lsb 7 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio1_oe___bit 7 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2___lsb 8 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___lsb 11 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio2_oe___bit 11 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___lsb 15 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg___gio3_oe___bit 15 -#define reg_iop_sw_cfg_rw_gio_out_grp0_cfg_offset 112 - -/* Register rw_gio_out_grp1_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___lsb 3 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio4_oe___bit 3 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___lsb 7 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio5_oe___bit 7 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6___lsb 8 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___lsb 11 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio6_oe___bit 11 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___lsb 15 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg___gio7_oe___bit 15 -#define reg_iop_sw_cfg_rw_gio_out_grp1_cfg_offset 116 - -/* Register rw_gio_out_grp2_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___lsb 3 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio8_oe___bit 3 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___lsb 7 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio9_oe___bit 7 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10___lsb 8 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___lsb 11 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio10_oe___bit 11 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___lsb 15 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg___gio11_oe___bit 15 -#define reg_iop_sw_cfg_rw_gio_out_grp2_cfg_offset 120 - -/* Register rw_gio_out_grp3_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___lsb 3 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio12_oe___bit 3 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___lsb 7 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio13_oe___bit 7 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14___lsb 8 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___lsb 11 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio14_oe___bit 11 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___lsb 15 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg___gio15_oe___bit 15 -#define reg_iop_sw_cfg_rw_gio_out_grp3_cfg_offset 124 - -/* Register rw_gio_out_grp4_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___lsb 3 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio16_oe___bit 3 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___lsb 7 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio17_oe___bit 7 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18___lsb 8 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___lsb 11 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio18_oe___bit 11 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___lsb 15 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg___gio19_oe___bit 15 -#define reg_iop_sw_cfg_rw_gio_out_grp4_cfg_offset 128 - -/* Register rw_gio_out_grp5_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___lsb 3 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio20_oe___bit 3 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___lsb 7 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio21_oe___bit 7 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22___lsb 8 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___lsb 11 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio22_oe___bit 11 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___lsb 15 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg___gio23_oe___bit 15 -#define reg_iop_sw_cfg_rw_gio_out_grp5_cfg_offset 132 - -/* Register rw_gio_out_grp6_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___lsb 3 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio24_oe___bit 3 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___lsb 7 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio25_oe___bit 7 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26___lsb 8 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___lsb 11 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio26_oe___bit 11 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___lsb 15 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg___gio27_oe___bit 15 -#define reg_iop_sw_cfg_rw_gio_out_grp6_cfg_offset 136 - -/* Register rw_gio_out_grp7_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28___lsb 0 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___lsb 3 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio28_oe___bit 3 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29___lsb 4 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___lsb 7 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio29_oe___bit 7 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30___lsb 8 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___lsb 11 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio30_oe___bit 11 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31___lsb 12 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31___width 3 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___lsb 15 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___width 1 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg___gio31_oe___bit 15 -#define reg_iop_sw_cfg_rw_gio_out_grp7_cfg_offset 140 - -/* Register rw_spu_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_spu_cfg___bus0_in___lsb 0 -#define reg_iop_sw_cfg_rw_spu_cfg___bus0_in___width 1 -#define reg_iop_sw_cfg_rw_spu_cfg___bus0_in___bit 0 -#define reg_iop_sw_cfg_rw_spu_cfg___bus1_in___lsb 1 -#define reg_iop_sw_cfg_rw_spu_cfg___bus1_in___width 1 -#define reg_iop_sw_cfg_rw_spu_cfg___bus1_in___bit 1 -#define reg_iop_sw_cfg_rw_spu_cfg_offset 144 - -/* Register rw_timer_grp0_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___ext_clk___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___ext_clk___width 3 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___lsb 3 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_en___width 2 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___lsb 5 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_en___width 2 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___lsb 7 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_en___width 2 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___lsb 9 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_en___width 2 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___lsb 11 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr0_dis___width 2 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___lsb 13 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr1_dis___width 2 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___lsb 15 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr2_dis___width 2 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___lsb 17 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg___tmr3_dis___width 2 -#define reg_iop_sw_cfg_rw_timer_grp0_cfg_offset 148 - -/* Register rw_timer_grp1_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___ext_clk___lsb 0 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___ext_clk___width 3 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___lsb 3 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_en___width 2 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___lsb 5 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_en___width 2 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___lsb 7 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_en___width 2 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___lsb 9 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_en___width 2 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___lsb 11 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr0_dis___width 2 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___lsb 13 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr1_dis___width 2 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___lsb 15 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr2_dis___width 2 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___lsb 17 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg___tmr3_dis___width 2 -#define reg_iop_sw_cfg_rw_timer_grp1_cfg_offset 152 - -/* Register rw_trigger_grps_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___lsb 0 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_dis___bit 0 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___lsb 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp0_en___bit 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___lsb 2 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_dis___bit 2 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___lsb 3 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp1_en___bit 3 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___lsb 4 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_dis___bit 4 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___lsb 5 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp2_en___bit 5 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___lsb 6 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_dis___bit 6 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___lsb 7 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp3_en___bit 7 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___lsb 8 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_dis___bit 8 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___lsb 9 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp4_en___bit 9 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___lsb 10 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_dis___bit 10 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___lsb 11 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp5_en___bit 11 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___lsb 12 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_dis___bit 12 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___lsb 13 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp6_en___bit 13 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___lsb 14 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_dis___bit 14 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___lsb 15 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___width 1 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg___grp7_en___bit 15 -#define reg_iop_sw_cfg_rw_trigger_grps_cfg_offset 156 - -/* Register rw_pdp_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_pdp_cfg___out_strb___lsb 0 -#define reg_iop_sw_cfg_rw_pdp_cfg___out_strb___width 4 -#define reg_iop_sw_cfg_rw_pdp_cfg___in_src___lsb 4 -#define reg_iop_sw_cfg_rw_pdp_cfg___in_src___width 2 -#define reg_iop_sw_cfg_rw_pdp_cfg___in_size___lsb 6 -#define reg_iop_sw_cfg_rw_pdp_cfg___in_size___width 3 -#define reg_iop_sw_cfg_rw_pdp_cfg___in_last___lsb 9 -#define reg_iop_sw_cfg_rw_pdp_cfg___in_last___width 2 -#define reg_iop_sw_cfg_rw_pdp_cfg___in_strb___lsb 11 -#define reg_iop_sw_cfg_rw_pdp_cfg___in_strb___width 4 -#define reg_iop_sw_cfg_rw_pdp_cfg_offset 160 - -/* Register rw_sdp_cfg, scope iop_sw_cfg, type rw */ -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out_strb___lsb 0 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_out_strb___width 3 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_data___lsb 3 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_data___width 3 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_last___lsb 6 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_last___width 2 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_strb___lsb 8 -#define reg_iop_sw_cfg_rw_sdp_cfg___sdp_in_strb___width 3 -#define reg_iop_sw_cfg_rw_sdp_cfg_offset 164 - - -/* Constants */ -#define regk_iop_sw_cfg_a 0x00000001 -#define regk_iop_sw_cfg_b 0x00000002 -#define regk_iop_sw_cfg_bus 0x00000000 -#define regk_iop_sw_cfg_bus_rot16 0x00000002 -#define regk_iop_sw_cfg_bus_rot24 0x00000003 -#define regk_iop_sw_cfg_bus_rot8 0x00000001 -#define regk_iop_sw_cfg_clk12 0x00000000 -#define regk_iop_sw_cfg_cpu 0x00000000 -#define regk_iop_sw_cfg_gated_clk0 0x0000000e -#define regk_iop_sw_cfg_gated_clk1 0x0000000f -#define regk_iop_sw_cfg_gio0 0x00000004 -#define regk_iop_sw_cfg_gio1 0x00000001 -#define regk_iop_sw_cfg_gio2 0x00000005 -#define regk_iop_sw_cfg_gio3 0x00000002 -#define regk_iop_sw_cfg_gio4 0x00000006 -#define regk_iop_sw_cfg_gio5 0x00000003 -#define regk_iop_sw_cfg_gio6 0x00000007 -#define regk_iop_sw_cfg_gio7 0x00000004 -#define regk_iop_sw_cfg_gio_in18 0x00000002 -#define regk_iop_sw_cfg_gio_in19 0x00000003 -#define regk_iop_sw_cfg_gio_in20 0x00000004 -#define regk_iop_sw_cfg_gio_in21 0x00000005 -#define regk_iop_sw_cfg_gio_in26 0x00000006 -#define regk_iop_sw_cfg_gio_in27 0x00000007 -#define regk_iop_sw_cfg_gio_in4 0x00000000 -#define regk_iop_sw_cfg_gio_in5 0x00000001 -#define regk_iop_sw_cfg_last_timer_grp0_tmr2 0x00000001 -#define regk_iop_sw_cfg_last_timer_grp1_tmr2 0x00000002 -#define regk_iop_sw_cfg_last_timer_grp1_tmr3 0x00000003 -#define regk_iop_sw_cfg_mpu 0x00000001 -#define regk_iop_sw_cfg_none 0x00000000 -#define regk_iop_sw_cfg_pdp_out 0x00000001 -#define regk_iop_sw_cfg_pdp_out_hi 0x00000001 -#define regk_iop_sw_cfg_pdp_out_lo 0x00000000 -#define regk_iop_sw_cfg_rw_bus_mask_default 0x00000000 -#define regk_iop_sw_cfg_rw_bus_oe_mask_default 0x00000000 -#define regk_iop_sw_cfg_rw_bus_out_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_crc_par_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_dmc_in_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_dmc_out_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_in_extra_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_in_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_out_extra_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_fifo_out_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_mask_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_oe_mask_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp0_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp1_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp2_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp3_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp4_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp5_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp6_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_gio_out_grp7_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_pdp_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_pinmapping_default 0x00555555 -#define regk_iop_sw_cfg_rw_sap_in_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_sap_out_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_scrc_in_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_scrc_out_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_sdp_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_spu_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_spu_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp0_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp1_cfg_default 0x00000000 -#define regk_iop_sw_cfg_rw_timer_grp1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp0_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp1_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp2_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp3_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp4_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp5_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp6_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grp7_owner_default 0x00000000 -#define regk_iop_sw_cfg_rw_trigger_grps_cfg_default 0x00000000 -#define regk_iop_sw_cfg_sdp_out 0x00000004 -#define regk_iop_sw_cfg_size16 0x00000002 -#define regk_iop_sw_cfg_size24 0x00000003 -#define regk_iop_sw_cfg_size32 0x00000004 -#define regk_iop_sw_cfg_size8 0x00000001 -#define regk_iop_sw_cfg_spu 0x00000002 -#define regk_iop_sw_cfg_spu_bus_out0_hi 0x00000002 -#define regk_iop_sw_cfg_spu_bus_out0_lo 0x00000002 -#define regk_iop_sw_cfg_spu_bus_out1_hi 0x00000003 -#define regk_iop_sw_cfg_spu_bus_out1_lo 0x00000003 -#define regk_iop_sw_cfg_spu_g0 0x00000007 -#define regk_iop_sw_cfg_spu_g1 0x00000007 -#define regk_iop_sw_cfg_spu_g2 0x00000007 -#define regk_iop_sw_cfg_spu_g3 0x00000007 -#define regk_iop_sw_cfg_spu_g4 0x00000007 -#define regk_iop_sw_cfg_spu_g5 0x00000007 -#define regk_iop_sw_cfg_spu_g6 0x00000007 -#define regk_iop_sw_cfg_spu_g7 0x00000007 -#define regk_iop_sw_cfg_spu_gio0 0x00000000 -#define regk_iop_sw_cfg_spu_gio1 0x00000001 -#define regk_iop_sw_cfg_spu_gio5 0x00000005 -#define regk_iop_sw_cfg_spu_gio6 0x00000006 -#define regk_iop_sw_cfg_spu_gio7 0x00000007 -#define regk_iop_sw_cfg_spu_gio_out0 0x00000008 -#define regk_iop_sw_cfg_spu_gio_out1 0x00000009 -#define regk_iop_sw_cfg_spu_gio_out2 0x0000000a -#define regk_iop_sw_cfg_spu_gio_out3 0x0000000b -#define regk_iop_sw_cfg_spu_gio_out4 0x0000000c -#define regk_iop_sw_cfg_spu_gio_out5 0x0000000d -#define regk_iop_sw_cfg_spu_gio_out6 0x0000000e -#define regk_iop_sw_cfg_spu_gio_out7 0x0000000f -#define regk_iop_sw_cfg_spu_gioout0 0x00000000 -#define regk_iop_sw_cfg_spu_gioout1 0x00000000 -#define regk_iop_sw_cfg_spu_gioout10 0x00000007 -#define regk_iop_sw_cfg_spu_gioout11 0x00000007 -#define regk_iop_sw_cfg_spu_gioout12 0x00000007 -#define regk_iop_sw_cfg_spu_gioout13 0x00000007 -#define regk_iop_sw_cfg_spu_gioout14 0x00000007 -#define regk_iop_sw_cfg_spu_gioout15 0x00000007 -#define regk_iop_sw_cfg_spu_gioout16 0x00000007 -#define regk_iop_sw_cfg_spu_gioout17 0x00000007 -#define regk_iop_sw_cfg_spu_gioout18 0x00000007 -#define regk_iop_sw_cfg_spu_gioout19 0x00000007 -#define regk_iop_sw_cfg_spu_gioout2 0x00000001 -#define regk_iop_sw_cfg_spu_gioout20 0x00000007 -#define regk_iop_sw_cfg_spu_gioout21 0x00000007 -#define regk_iop_sw_cfg_spu_gioout22 0x00000007 -#define regk_iop_sw_cfg_spu_gioout23 0x00000007 -#define regk_iop_sw_cfg_spu_gioout24 0x00000007 -#define regk_iop_sw_cfg_spu_gioout25 0x00000007 -#define regk_iop_sw_cfg_spu_gioout26 0x00000007 -#define regk_iop_sw_cfg_spu_gioout27 0x00000007 -#define regk_iop_sw_cfg_spu_gioout28 0x00000007 -#define regk_iop_sw_cfg_spu_gioout29 0x00000007 -#define regk_iop_sw_cfg_spu_gioout3 0x00000001 -#define regk_iop_sw_cfg_spu_gioout30 0x00000007 -#define regk_iop_sw_cfg_spu_gioout31 0x00000007 -#define regk_iop_sw_cfg_spu_gioout4 0x00000002 -#define regk_iop_sw_cfg_spu_gioout5 0x00000002 -#define regk_iop_sw_cfg_spu_gioout6 0x00000003 -#define regk_iop_sw_cfg_spu_gioout7 0x00000003 -#define regk_iop_sw_cfg_spu_gioout8 0x00000007 -#define regk_iop_sw_cfg_spu_gioout9 0x00000007 -#define regk_iop_sw_cfg_strb_timer_grp0_tmr0 0x00000001 -#define regk_iop_sw_cfg_strb_timer_grp0_tmr1 0x00000002 -#define regk_iop_sw_cfg_strb_timer_grp1_tmr0 0x00000003 -#define regk_iop_sw_cfg_strb_timer_grp1_tmr1 0x00000002 -#define regk_iop_sw_cfg_timer_grp0 0x00000000 -#define regk_iop_sw_cfg_timer_grp0_rot 0x00000001 -#define regk_iop_sw_cfg_timer_grp0_strb0 0x00000005 -#define regk_iop_sw_cfg_timer_grp0_strb1 0x00000005 -#define regk_iop_sw_cfg_timer_grp0_strb2 0x00000005 -#define regk_iop_sw_cfg_timer_grp0_strb3 0x00000005 -#define regk_iop_sw_cfg_timer_grp0_tmr0 0x00000002 -#define regk_iop_sw_cfg_timer_grp1 0x00000000 -#define regk_iop_sw_cfg_timer_grp1_rot 0x00000001 -#define regk_iop_sw_cfg_timer_grp1_strb0 0x00000006 -#define regk_iop_sw_cfg_timer_grp1_strb1 0x00000006 -#define regk_iop_sw_cfg_timer_grp1_strb2 0x00000006 -#define regk_iop_sw_cfg_timer_grp1_strb3 0x00000006 -#define regk_iop_sw_cfg_timer_grp1_tmr0 0x00000003 -#define regk_iop_sw_cfg_trig0_0 0x00000000 -#define regk_iop_sw_cfg_trig0_1 0x00000000 -#define regk_iop_sw_cfg_trig0_2 0x00000000 -#define regk_iop_sw_cfg_trig0_3 0x00000000 -#define regk_iop_sw_cfg_trig1_0 0x00000000 -#define regk_iop_sw_cfg_trig1_1 0x00000000 -#define regk_iop_sw_cfg_trig1_2 0x00000000 -#define regk_iop_sw_cfg_trig1_3 0x00000000 -#define regk_iop_sw_cfg_trig2_0 0x00000001 -#define regk_iop_sw_cfg_trig2_1 0x00000001 -#define regk_iop_sw_cfg_trig2_2 0x00000001 -#define regk_iop_sw_cfg_trig2_3 0x00000001 -#define regk_iop_sw_cfg_trig3_0 0x00000001 -#define regk_iop_sw_cfg_trig3_1 0x00000001 -#define regk_iop_sw_cfg_trig3_2 0x00000001 -#define regk_iop_sw_cfg_trig3_3 0x00000001 -#define regk_iop_sw_cfg_trig4_0 0x00000002 -#define regk_iop_sw_cfg_trig4_1 0x00000002 -#define regk_iop_sw_cfg_trig4_2 0x00000002 -#define regk_iop_sw_cfg_trig4_3 0x00000002 -#define regk_iop_sw_cfg_trig5_0 0x00000002 -#define regk_iop_sw_cfg_trig5_1 0x00000002 -#define regk_iop_sw_cfg_trig5_2 0x00000002 -#define regk_iop_sw_cfg_trig5_3 0x00000002 -#define regk_iop_sw_cfg_trig6_0 0x00000003 -#define regk_iop_sw_cfg_trig6_1 0x00000003 -#define regk_iop_sw_cfg_trig6_2 0x00000003 -#define regk_iop_sw_cfg_trig6_3 0x00000003 -#define regk_iop_sw_cfg_trig7_0 0x00000003 -#define regk_iop_sw_cfg_trig7_1 0x00000003 -#define regk_iop_sw_cfg_trig7_2 0x00000003 -#define regk_iop_sw_cfg_trig7_3 0x00000003 -#endif /* __iop_sw_cfg_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cpu_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cpu_defs_asm.h deleted file mode 100644 index 3f4fe1b31815..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_cpu_defs_asm.h +++ /dev/null @@ -1,950 +0,0 @@ -#ifndef __iop_sw_cpu_defs_asm_h -#define __iop_sw_cpu_defs_asm_h - -/* - * This file is autogenerated from - * file: iop_sw_cpu.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_cpu_defs_asm.h iop_sw_cpu.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register r_mpu_trace, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_mpu_trace_offset 0 - -/* Register r_spu_trace, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_spu_trace_offset 4 - -/* Register r_spu_fsm_trace, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_spu_fsm_trace_offset 8 - -/* Register rw_mc_ctrl, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___lsb 0 -#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___width 1 -#define reg_iop_sw_cpu_rw_mc_ctrl___keep_owner___bit 0 -#define reg_iop_sw_cpu_rw_mc_ctrl___cmd___lsb 1 -#define reg_iop_sw_cpu_rw_mc_ctrl___cmd___width 2 -#define reg_iop_sw_cpu_rw_mc_ctrl___size___lsb 3 -#define reg_iop_sw_cpu_rw_mc_ctrl___size___width 3 -#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu_mem___lsb 6 -#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu_mem___width 1 -#define reg_iop_sw_cpu_rw_mc_ctrl___wr_spu_mem___bit 6 -#define reg_iop_sw_cpu_rw_mc_ctrl_offset 12 - -/* Register rw_mc_data, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_mc_data___val___lsb 0 -#define reg_iop_sw_cpu_rw_mc_data___val___width 32 -#define reg_iop_sw_cpu_rw_mc_data_offset 16 - -/* Register rw_mc_addr, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_mc_addr_offset 20 - -/* Register rs_mc_data, scope iop_sw_cpu, type rs */ -#define reg_iop_sw_cpu_rs_mc_data_offset 24 - -/* Register r_mc_data, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_mc_data_offset 28 - -/* Register r_mc_stat, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___lsb 0 -#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___width 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_cpu___bit 0 -#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___lsb 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___width 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_mpu___bit 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_spu___lsb 2 -#define reg_iop_sw_cpu_r_mc_stat___busy_spu___width 1 -#define reg_iop_sw_cpu_r_mc_stat___busy_spu___bit 2 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___lsb 3 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___width 1 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_cpu___bit 3 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___lsb 4 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___width 1 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_mpu___bit 4 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu___lsb 5 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu___width 1 -#define reg_iop_sw_cpu_r_mc_stat___owned_by_spu___bit 5 -#define reg_iop_sw_cpu_r_mc_stat_offset 32 - -/* Register rw_bus_clr_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus_clr_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus_clr_mask___byte0___width 8 -#define reg_iop_sw_cpu_rw_bus_clr_mask___byte1___lsb 8 -#define reg_iop_sw_cpu_rw_bus_clr_mask___byte1___width 8 -#define reg_iop_sw_cpu_rw_bus_clr_mask___byte2___lsb 16 -#define reg_iop_sw_cpu_rw_bus_clr_mask___byte2___width 8 -#define reg_iop_sw_cpu_rw_bus_clr_mask___byte3___lsb 24 -#define reg_iop_sw_cpu_rw_bus_clr_mask___byte3___width 8 -#define reg_iop_sw_cpu_rw_bus_clr_mask_offset 36 - -/* Register rw_bus_set_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus_set_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus_set_mask___byte0___width 8 -#define reg_iop_sw_cpu_rw_bus_set_mask___byte1___lsb 8 -#define reg_iop_sw_cpu_rw_bus_set_mask___byte1___width 8 -#define reg_iop_sw_cpu_rw_bus_set_mask___byte2___lsb 16 -#define reg_iop_sw_cpu_rw_bus_set_mask___byte2___width 8 -#define reg_iop_sw_cpu_rw_bus_set_mask___byte3___lsb 24 -#define reg_iop_sw_cpu_rw_bus_set_mask___byte3___width 8 -#define reg_iop_sw_cpu_rw_bus_set_mask_offset 40 - -/* Register rw_bus_oe_clr_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte0___width 1 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte0___bit 0 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte1___lsb 1 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte1___width 1 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte1___bit 1 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte2___lsb 2 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte2___width 1 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte2___bit 2 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte3___lsb 3 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte3___width 1 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask___byte3___bit 3 -#define reg_iop_sw_cpu_rw_bus_oe_clr_mask_offset 44 - -/* Register rw_bus_oe_set_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte0___lsb 0 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte0___width 1 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte0___bit 0 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte1___lsb 1 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte1___width 1 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte1___bit 1 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte2___lsb 2 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte2___width 1 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte2___bit 2 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte3___lsb 3 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte3___width 1 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask___byte3___bit 3 -#define reg_iop_sw_cpu_rw_bus_oe_set_mask_offset 48 - -/* Register r_bus_in, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_bus_in_offset 52 - -/* Register rw_gio_clr_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_gio_clr_mask___val___lsb 0 -#define reg_iop_sw_cpu_rw_gio_clr_mask___val___width 32 -#define reg_iop_sw_cpu_rw_gio_clr_mask_offset 56 - -/* Register rw_gio_set_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_gio_set_mask___val___lsb 0 -#define reg_iop_sw_cpu_rw_gio_set_mask___val___width 32 -#define reg_iop_sw_cpu_rw_gio_set_mask_offset 60 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_gio_oe_clr_mask___val___lsb 0 -#define reg_iop_sw_cpu_rw_gio_oe_clr_mask___val___width 32 -#define reg_iop_sw_cpu_rw_gio_oe_clr_mask_offset 64 - -/* Register rw_gio_oe_set_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_gio_oe_set_mask___val___lsb 0 -#define reg_iop_sw_cpu_rw_gio_oe_set_mask___val___width 32 -#define reg_iop_sw_cpu_rw_gio_oe_set_mask_offset 68 - -/* Register r_gio_in, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_gio_in_offset 72 - -/* Register rw_intr0_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___lsb 0 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_0___bit 0 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___lsb 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_1___bit 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___lsb 2 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_2___bit 2 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___lsb 3 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_3___bit 3 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___lsb 4 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_4___bit 4 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___lsb 5 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_5___bit 5 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___lsb 6 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_6___bit 6 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___lsb 7 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_7___bit 7 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___lsb 8 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_8___bit 8 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___lsb 9 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_9___bit 9 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___lsb 10 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_10___bit 10 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___lsb 11 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_11___bit 11 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___lsb 12 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_12___bit 12 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___lsb 13 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_13___bit 13 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___lsb 14 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_14___bit 14 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___lsb 15 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___mpu_15___bit 15 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_0___lsb 16 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_0___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_0___bit 16 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_1___lsb 17 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_1___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_1___bit 17 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_2___lsb 18 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_2___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_2___bit 18 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_3___lsb 19 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_3___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_3___bit 19 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_4___lsb 20 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_4___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_4___bit 20 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_5___lsb 21 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_5___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_5___bit 21 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_6___lsb 22 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_6___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_6___bit 22 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_7___lsb 23 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_7___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_7___bit 23 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_8___lsb 24 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_8___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_8___bit 24 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_9___lsb 25 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_9___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_9___bit 25 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_10___lsb 26 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_10___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_10___bit 26 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_11___lsb 27 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_11___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_11___bit 27 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_12___lsb 28 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_12___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_12___bit 28 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_13___lsb 29 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_13___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_13___bit 29 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_14___lsb 30 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_14___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_14___bit 30 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_15___lsb 31 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_15___width 1 -#define reg_iop_sw_cpu_rw_intr0_mask___spu_15___bit 31 -#define reg_iop_sw_cpu_rw_intr0_mask_offset 76 - -/* Register rw_ack_intr0, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___lsb 0 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_0___bit 0 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___lsb 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_1___bit 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___lsb 2 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_2___bit 2 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___lsb 3 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_3___bit 3 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___lsb 4 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_4___bit 4 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___lsb 5 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_5___bit 5 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___lsb 6 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_6___bit 6 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___lsb 7 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_7___bit 7 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___lsb 8 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_8___bit 8 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___lsb 9 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_9___bit 9 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___lsb 10 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_10___bit 10 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___lsb 11 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_11___bit 11 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___lsb 12 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_12___bit 12 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___lsb 13 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_13___bit 13 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___lsb 14 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_14___bit 14 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___lsb 15 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___mpu_15___bit 15 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_0___lsb 16 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_0___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_0___bit 16 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_1___lsb 17 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_1___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_1___bit 17 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_2___lsb 18 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_2___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_2___bit 18 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_3___lsb 19 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_3___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_3___bit 19 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_4___lsb 20 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_4___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_4___bit 20 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_5___lsb 21 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_5___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_5___bit 21 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_6___lsb 22 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_6___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_6___bit 22 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_7___lsb 23 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_7___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_7___bit 23 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_8___lsb 24 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_8___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_8___bit 24 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_9___lsb 25 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_9___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_9___bit 25 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_10___lsb 26 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_10___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_10___bit 26 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_11___lsb 27 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_11___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_11___bit 27 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_12___lsb 28 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_12___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_12___bit 28 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_13___lsb 29 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_13___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_13___bit 29 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_14___lsb 30 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_14___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_14___bit 30 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_15___lsb 31 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_15___width 1 -#define reg_iop_sw_cpu_rw_ack_intr0___spu_15___bit 31 -#define reg_iop_sw_cpu_rw_ack_intr0_offset 80 - -/* Register r_intr0, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_intr0___mpu_0___lsb 0 -#define reg_iop_sw_cpu_r_intr0___mpu_0___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_0___bit 0 -#define reg_iop_sw_cpu_r_intr0___mpu_1___lsb 1 -#define reg_iop_sw_cpu_r_intr0___mpu_1___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_1___bit 1 -#define reg_iop_sw_cpu_r_intr0___mpu_2___lsb 2 -#define reg_iop_sw_cpu_r_intr0___mpu_2___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_2___bit 2 -#define reg_iop_sw_cpu_r_intr0___mpu_3___lsb 3 -#define reg_iop_sw_cpu_r_intr0___mpu_3___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_3___bit 3 -#define reg_iop_sw_cpu_r_intr0___mpu_4___lsb 4 -#define reg_iop_sw_cpu_r_intr0___mpu_4___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_4___bit 4 -#define reg_iop_sw_cpu_r_intr0___mpu_5___lsb 5 -#define reg_iop_sw_cpu_r_intr0___mpu_5___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_5___bit 5 -#define reg_iop_sw_cpu_r_intr0___mpu_6___lsb 6 -#define reg_iop_sw_cpu_r_intr0___mpu_6___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_6___bit 6 -#define reg_iop_sw_cpu_r_intr0___mpu_7___lsb 7 -#define reg_iop_sw_cpu_r_intr0___mpu_7___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_7___bit 7 -#define reg_iop_sw_cpu_r_intr0___mpu_8___lsb 8 -#define reg_iop_sw_cpu_r_intr0___mpu_8___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_8___bit 8 -#define reg_iop_sw_cpu_r_intr0___mpu_9___lsb 9 -#define reg_iop_sw_cpu_r_intr0___mpu_9___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_9___bit 9 -#define reg_iop_sw_cpu_r_intr0___mpu_10___lsb 10 -#define reg_iop_sw_cpu_r_intr0___mpu_10___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_10___bit 10 -#define reg_iop_sw_cpu_r_intr0___mpu_11___lsb 11 -#define reg_iop_sw_cpu_r_intr0___mpu_11___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_11___bit 11 -#define reg_iop_sw_cpu_r_intr0___mpu_12___lsb 12 -#define reg_iop_sw_cpu_r_intr0___mpu_12___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_12___bit 12 -#define reg_iop_sw_cpu_r_intr0___mpu_13___lsb 13 -#define reg_iop_sw_cpu_r_intr0___mpu_13___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_13___bit 13 -#define reg_iop_sw_cpu_r_intr0___mpu_14___lsb 14 -#define reg_iop_sw_cpu_r_intr0___mpu_14___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_14___bit 14 -#define reg_iop_sw_cpu_r_intr0___mpu_15___lsb 15 -#define reg_iop_sw_cpu_r_intr0___mpu_15___width 1 -#define reg_iop_sw_cpu_r_intr0___mpu_15___bit 15 -#define reg_iop_sw_cpu_r_intr0___spu_0___lsb 16 -#define reg_iop_sw_cpu_r_intr0___spu_0___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_0___bit 16 -#define reg_iop_sw_cpu_r_intr0___spu_1___lsb 17 -#define reg_iop_sw_cpu_r_intr0___spu_1___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_1___bit 17 -#define reg_iop_sw_cpu_r_intr0___spu_2___lsb 18 -#define reg_iop_sw_cpu_r_intr0___spu_2___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_2___bit 18 -#define reg_iop_sw_cpu_r_intr0___spu_3___lsb 19 -#define reg_iop_sw_cpu_r_intr0___spu_3___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_3___bit 19 -#define reg_iop_sw_cpu_r_intr0___spu_4___lsb 20 -#define reg_iop_sw_cpu_r_intr0___spu_4___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_4___bit 20 -#define reg_iop_sw_cpu_r_intr0___spu_5___lsb 21 -#define reg_iop_sw_cpu_r_intr0___spu_5___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_5___bit 21 -#define reg_iop_sw_cpu_r_intr0___spu_6___lsb 22 -#define reg_iop_sw_cpu_r_intr0___spu_6___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_6___bit 22 -#define reg_iop_sw_cpu_r_intr0___spu_7___lsb 23 -#define reg_iop_sw_cpu_r_intr0___spu_7___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_7___bit 23 -#define reg_iop_sw_cpu_r_intr0___spu_8___lsb 24 -#define reg_iop_sw_cpu_r_intr0___spu_8___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_8___bit 24 -#define reg_iop_sw_cpu_r_intr0___spu_9___lsb 25 -#define reg_iop_sw_cpu_r_intr0___spu_9___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_9___bit 25 -#define reg_iop_sw_cpu_r_intr0___spu_10___lsb 26 -#define reg_iop_sw_cpu_r_intr0___spu_10___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_10___bit 26 -#define reg_iop_sw_cpu_r_intr0___spu_11___lsb 27 -#define reg_iop_sw_cpu_r_intr0___spu_11___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_11___bit 27 -#define reg_iop_sw_cpu_r_intr0___spu_12___lsb 28 -#define reg_iop_sw_cpu_r_intr0___spu_12___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_12___bit 28 -#define reg_iop_sw_cpu_r_intr0___spu_13___lsb 29 -#define reg_iop_sw_cpu_r_intr0___spu_13___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_13___bit 29 -#define reg_iop_sw_cpu_r_intr0___spu_14___lsb 30 -#define reg_iop_sw_cpu_r_intr0___spu_14___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_14___bit 30 -#define reg_iop_sw_cpu_r_intr0___spu_15___lsb 31 -#define reg_iop_sw_cpu_r_intr0___spu_15___width 1 -#define reg_iop_sw_cpu_r_intr0___spu_15___bit 31 -#define reg_iop_sw_cpu_r_intr0_offset 84 - -/* Register r_masked_intr0, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___lsb 0 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_0___bit 0 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___lsb 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_1___bit 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___lsb 2 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_2___bit 2 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___lsb 3 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_3___bit 3 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___lsb 4 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_4___bit 4 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___lsb 5 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_5___bit 5 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___lsb 6 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_6___bit 6 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___lsb 7 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_7___bit 7 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___lsb 8 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_8___bit 8 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___lsb 9 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_9___bit 9 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___lsb 10 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_10___bit 10 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___lsb 11 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_11___bit 11 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___lsb 12 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_12___bit 12 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___lsb 13 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_13___bit 13 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___lsb 14 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_14___bit 14 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___lsb 15 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___mpu_15___bit 15 -#define reg_iop_sw_cpu_r_masked_intr0___spu_0___lsb 16 -#define reg_iop_sw_cpu_r_masked_intr0___spu_0___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_0___bit 16 -#define reg_iop_sw_cpu_r_masked_intr0___spu_1___lsb 17 -#define reg_iop_sw_cpu_r_masked_intr0___spu_1___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_1___bit 17 -#define reg_iop_sw_cpu_r_masked_intr0___spu_2___lsb 18 -#define reg_iop_sw_cpu_r_masked_intr0___spu_2___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_2___bit 18 -#define reg_iop_sw_cpu_r_masked_intr0___spu_3___lsb 19 -#define reg_iop_sw_cpu_r_masked_intr0___spu_3___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_3___bit 19 -#define reg_iop_sw_cpu_r_masked_intr0___spu_4___lsb 20 -#define reg_iop_sw_cpu_r_masked_intr0___spu_4___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_4___bit 20 -#define reg_iop_sw_cpu_r_masked_intr0___spu_5___lsb 21 -#define reg_iop_sw_cpu_r_masked_intr0___spu_5___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_5___bit 21 -#define reg_iop_sw_cpu_r_masked_intr0___spu_6___lsb 22 -#define reg_iop_sw_cpu_r_masked_intr0___spu_6___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_6___bit 22 -#define reg_iop_sw_cpu_r_masked_intr0___spu_7___lsb 23 -#define reg_iop_sw_cpu_r_masked_intr0___spu_7___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_7___bit 23 -#define reg_iop_sw_cpu_r_masked_intr0___spu_8___lsb 24 -#define reg_iop_sw_cpu_r_masked_intr0___spu_8___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_8___bit 24 -#define reg_iop_sw_cpu_r_masked_intr0___spu_9___lsb 25 -#define reg_iop_sw_cpu_r_masked_intr0___spu_9___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_9___bit 25 -#define reg_iop_sw_cpu_r_masked_intr0___spu_10___lsb 26 -#define reg_iop_sw_cpu_r_masked_intr0___spu_10___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_10___bit 26 -#define reg_iop_sw_cpu_r_masked_intr0___spu_11___lsb 27 -#define reg_iop_sw_cpu_r_masked_intr0___spu_11___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_11___bit 27 -#define reg_iop_sw_cpu_r_masked_intr0___spu_12___lsb 28 -#define reg_iop_sw_cpu_r_masked_intr0___spu_12___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_12___bit 28 -#define reg_iop_sw_cpu_r_masked_intr0___spu_13___lsb 29 -#define reg_iop_sw_cpu_r_masked_intr0___spu_13___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_13___bit 29 -#define reg_iop_sw_cpu_r_masked_intr0___spu_14___lsb 30 -#define reg_iop_sw_cpu_r_masked_intr0___spu_14___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_14___bit 30 -#define reg_iop_sw_cpu_r_masked_intr0___spu_15___lsb 31 -#define reg_iop_sw_cpu_r_masked_intr0___spu_15___width 1 -#define reg_iop_sw_cpu_r_masked_intr0___spu_15___bit 31 -#define reg_iop_sw_cpu_r_masked_intr0_offset 88 - -/* Register rw_intr1_mask, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___lsb 0 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_16___bit 0 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___lsb 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_17___bit 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___lsb 2 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_18___bit 2 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___lsb 3 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_19___bit 3 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___lsb 4 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_20___bit 4 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___lsb 5 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_21___bit 5 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___lsb 6 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_22___bit 6 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___lsb 7 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_23___bit 7 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___lsb 8 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_24___bit 8 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___lsb 9 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_25___bit 9 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___lsb 10 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_26___bit 10 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___lsb 11 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_27___bit 11 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___lsb 12 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_28___bit 12 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___lsb 13 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_29___bit 13 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___lsb 14 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_30___bit 14 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___lsb 15 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___mpu_31___bit 15 -#define reg_iop_sw_cpu_rw_intr1_mask___dmc_in___lsb 16 -#define reg_iop_sw_cpu_rw_intr1_mask___dmc_in___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___dmc_in___bit 16 -#define reg_iop_sw_cpu_rw_intr1_mask___dmc_out___lsb 17 -#define reg_iop_sw_cpu_rw_intr1_mask___dmc_out___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___dmc_out___bit 17 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in___lsb 18 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in___bit 18 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out___lsb 19 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out___bit 19 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in_extra___lsb 20 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in_extra___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_in_extra___bit 20 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out_extra___lsb 21 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out_extra___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___fifo_out_extra___bit 21 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp0___lsb 22 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp0___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp0___bit 22 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp1___lsb 23 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp1___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp1___bit 23 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp2___lsb 24 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp2___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp2___bit 24 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp3___lsb 25 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp3___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp3___bit 25 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp4___lsb 26 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp4___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp4___bit 26 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp5___lsb 27 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp5___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp5___bit 27 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp6___lsb 28 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp6___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp6___bit 28 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp7___lsb 29 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp7___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___trigger_grp7___bit 29 -#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp0___lsb 30 -#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp0___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp0___bit 30 -#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp1___lsb 31 -#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp1___width 1 -#define reg_iop_sw_cpu_rw_intr1_mask___timer_grp1___bit 31 -#define reg_iop_sw_cpu_rw_intr1_mask_offset 92 - -/* Register rw_ack_intr1, scope iop_sw_cpu, type rw */ -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___lsb 0 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_16___bit 0 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___lsb 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_17___bit 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___lsb 2 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_18___bit 2 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___lsb 3 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_19___bit 3 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___lsb 4 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_20___bit 4 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___lsb 5 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_21___bit 5 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___lsb 6 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_22___bit 6 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___lsb 7 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_23___bit 7 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___lsb 8 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_24___bit 8 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___lsb 9 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_25___bit 9 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___lsb 10 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_26___bit 10 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___lsb 11 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_27___bit 11 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___lsb 12 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_28___bit 12 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___lsb 13 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_29___bit 13 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___lsb 14 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_30___bit 14 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___lsb 15 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___width 1 -#define reg_iop_sw_cpu_rw_ack_intr1___mpu_31___bit 15 -#define reg_iop_sw_cpu_rw_ack_intr1_offset 96 - -/* Register r_intr1, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_intr1___mpu_16___lsb 0 -#define reg_iop_sw_cpu_r_intr1___mpu_16___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_16___bit 0 -#define reg_iop_sw_cpu_r_intr1___mpu_17___lsb 1 -#define reg_iop_sw_cpu_r_intr1___mpu_17___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_17___bit 1 -#define reg_iop_sw_cpu_r_intr1___mpu_18___lsb 2 -#define reg_iop_sw_cpu_r_intr1___mpu_18___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_18___bit 2 -#define reg_iop_sw_cpu_r_intr1___mpu_19___lsb 3 -#define reg_iop_sw_cpu_r_intr1___mpu_19___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_19___bit 3 -#define reg_iop_sw_cpu_r_intr1___mpu_20___lsb 4 -#define reg_iop_sw_cpu_r_intr1___mpu_20___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_20___bit 4 -#define reg_iop_sw_cpu_r_intr1___mpu_21___lsb 5 -#define reg_iop_sw_cpu_r_intr1___mpu_21___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_21___bit 5 -#define reg_iop_sw_cpu_r_intr1___mpu_22___lsb 6 -#define reg_iop_sw_cpu_r_intr1___mpu_22___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_22___bit 6 -#define reg_iop_sw_cpu_r_intr1___mpu_23___lsb 7 -#define reg_iop_sw_cpu_r_intr1___mpu_23___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_23___bit 7 -#define reg_iop_sw_cpu_r_intr1___mpu_24___lsb 8 -#define reg_iop_sw_cpu_r_intr1___mpu_24___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_24___bit 8 -#define reg_iop_sw_cpu_r_intr1___mpu_25___lsb 9 -#define reg_iop_sw_cpu_r_intr1___mpu_25___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_25___bit 9 -#define reg_iop_sw_cpu_r_intr1___mpu_26___lsb 10 -#define reg_iop_sw_cpu_r_intr1___mpu_26___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_26___bit 10 -#define reg_iop_sw_cpu_r_intr1___mpu_27___lsb 11 -#define reg_iop_sw_cpu_r_intr1___mpu_27___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_27___bit 11 -#define reg_iop_sw_cpu_r_intr1___mpu_28___lsb 12 -#define reg_iop_sw_cpu_r_intr1___mpu_28___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_28___bit 12 -#define reg_iop_sw_cpu_r_intr1___mpu_29___lsb 13 -#define reg_iop_sw_cpu_r_intr1___mpu_29___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_29___bit 13 -#define reg_iop_sw_cpu_r_intr1___mpu_30___lsb 14 -#define reg_iop_sw_cpu_r_intr1___mpu_30___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_30___bit 14 -#define reg_iop_sw_cpu_r_intr1___mpu_31___lsb 15 -#define reg_iop_sw_cpu_r_intr1___mpu_31___width 1 -#define reg_iop_sw_cpu_r_intr1___mpu_31___bit 15 -#define reg_iop_sw_cpu_r_intr1___dmc_in___lsb 16 -#define reg_iop_sw_cpu_r_intr1___dmc_in___width 1 -#define reg_iop_sw_cpu_r_intr1___dmc_in___bit 16 -#define reg_iop_sw_cpu_r_intr1___dmc_out___lsb 17 -#define reg_iop_sw_cpu_r_intr1___dmc_out___width 1 -#define reg_iop_sw_cpu_r_intr1___dmc_out___bit 17 -#define reg_iop_sw_cpu_r_intr1___fifo_in___lsb 18 -#define reg_iop_sw_cpu_r_intr1___fifo_in___width 1 -#define reg_iop_sw_cpu_r_intr1___fifo_in___bit 18 -#define reg_iop_sw_cpu_r_intr1___fifo_out___lsb 19 -#define reg_iop_sw_cpu_r_intr1___fifo_out___width 1 -#define reg_iop_sw_cpu_r_intr1___fifo_out___bit 19 -#define reg_iop_sw_cpu_r_intr1___fifo_in_extra___lsb 20 -#define reg_iop_sw_cpu_r_intr1___fifo_in_extra___width 1 -#define reg_iop_sw_cpu_r_intr1___fifo_in_extra___bit 20 -#define reg_iop_sw_cpu_r_intr1___fifo_out_extra___lsb 21 -#define reg_iop_sw_cpu_r_intr1___fifo_out_extra___width 1 -#define reg_iop_sw_cpu_r_intr1___fifo_out_extra___bit 21 -#define reg_iop_sw_cpu_r_intr1___trigger_grp0___lsb 22 -#define reg_iop_sw_cpu_r_intr1___trigger_grp0___width 1 -#define reg_iop_sw_cpu_r_intr1___trigger_grp0___bit 22 -#define reg_iop_sw_cpu_r_intr1___trigger_grp1___lsb 23 -#define reg_iop_sw_cpu_r_intr1___trigger_grp1___width 1 -#define reg_iop_sw_cpu_r_intr1___trigger_grp1___bit 23 -#define reg_iop_sw_cpu_r_intr1___trigger_grp2___lsb 24 -#define reg_iop_sw_cpu_r_intr1___trigger_grp2___width 1 -#define reg_iop_sw_cpu_r_intr1___trigger_grp2___bit 24 -#define reg_iop_sw_cpu_r_intr1___trigger_grp3___lsb 25 -#define reg_iop_sw_cpu_r_intr1___trigger_grp3___width 1 -#define reg_iop_sw_cpu_r_intr1___trigger_grp3___bit 25 -#define reg_iop_sw_cpu_r_intr1___trigger_grp4___lsb 26 -#define reg_iop_sw_cpu_r_intr1___trigger_grp4___width 1 -#define reg_iop_sw_cpu_r_intr1___trigger_grp4___bit 26 -#define reg_iop_sw_cpu_r_intr1___trigger_grp5___lsb 27 -#define reg_iop_sw_cpu_r_intr1___trigger_grp5___width 1 -#define reg_iop_sw_cpu_r_intr1___trigger_grp5___bit 27 -#define reg_iop_sw_cpu_r_intr1___trigger_grp6___lsb 28 -#define reg_iop_sw_cpu_r_intr1___trigger_grp6___width 1 -#define reg_iop_sw_cpu_r_intr1___trigger_grp6___bit 28 -#define reg_iop_sw_cpu_r_intr1___trigger_grp7___lsb 29 -#define reg_iop_sw_cpu_r_intr1___trigger_grp7___width 1 -#define reg_iop_sw_cpu_r_intr1___trigger_grp7___bit 29 -#define reg_iop_sw_cpu_r_intr1___timer_grp0___lsb 30 -#define reg_iop_sw_cpu_r_intr1___timer_grp0___width 1 -#define reg_iop_sw_cpu_r_intr1___timer_grp0___bit 30 -#define reg_iop_sw_cpu_r_intr1___timer_grp1___lsb 31 -#define reg_iop_sw_cpu_r_intr1___timer_grp1___width 1 -#define reg_iop_sw_cpu_r_intr1___timer_grp1___bit 31 -#define reg_iop_sw_cpu_r_intr1_offset 100 - -/* Register r_masked_intr1, scope iop_sw_cpu, type r */ -#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___lsb 0 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_16___bit 0 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___lsb 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_17___bit 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___lsb 2 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_18___bit 2 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___lsb 3 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_19___bit 3 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___lsb 4 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_20___bit 4 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___lsb 5 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_21___bit 5 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___lsb 6 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_22___bit 6 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___lsb 7 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_23___bit 7 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___lsb 8 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_24___bit 8 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___lsb 9 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_25___bit 9 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___lsb 10 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_26___bit 10 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___lsb 11 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_27___bit 11 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___lsb 12 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_28___bit 12 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___lsb 13 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_29___bit 13 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___lsb 14 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_30___bit 14 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___lsb 15 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___mpu_31___bit 15 -#define reg_iop_sw_cpu_r_masked_intr1___dmc_in___lsb 16 -#define reg_iop_sw_cpu_r_masked_intr1___dmc_in___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___dmc_in___bit 16 -#define reg_iop_sw_cpu_r_masked_intr1___dmc_out___lsb 17 -#define reg_iop_sw_cpu_r_masked_intr1___dmc_out___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___dmc_out___bit 17 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_in___lsb 18 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_in___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_in___bit 18 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_out___lsb 19 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_out___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_out___bit 19 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_in_extra___lsb 20 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_in_extra___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_in_extra___bit 20 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_out_extra___lsb 21 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_out_extra___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___fifo_out_extra___bit 21 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp0___lsb 22 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp0___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp0___bit 22 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp1___lsb 23 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp1___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp1___bit 23 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp2___lsb 24 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp2___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp2___bit 24 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp3___lsb 25 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp3___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp3___bit 25 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp4___lsb 26 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp4___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp4___bit 26 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp5___lsb 27 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp5___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp5___bit 27 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp6___lsb 28 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp6___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp6___bit 28 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp7___lsb 29 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp7___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___trigger_grp7___bit 29 -#define reg_iop_sw_cpu_r_masked_intr1___timer_grp0___lsb 30 -#define reg_iop_sw_cpu_r_masked_intr1___timer_grp0___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___timer_grp0___bit 30 -#define reg_iop_sw_cpu_r_masked_intr1___timer_grp1___lsb 31 -#define reg_iop_sw_cpu_r_masked_intr1___timer_grp1___width 1 -#define reg_iop_sw_cpu_r_masked_intr1___timer_grp1___bit 31 -#define reg_iop_sw_cpu_r_masked_intr1_offset 104 - - -/* Constants */ -#define regk_iop_sw_cpu_copy 0x00000000 -#define regk_iop_sw_cpu_no 0x00000000 -#define regk_iop_sw_cpu_rd 0x00000002 -#define regk_iop_sw_cpu_reg_copy 0x00000001 -#define regk_iop_sw_cpu_rw_bus_clr_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_bus_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_bus_oe_set_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_bus_set_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_gio_clr_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_gio_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_gio_oe_set_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_gio_set_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_intr0_mask_default 0x00000000 -#define regk_iop_sw_cpu_rw_intr1_mask_default 0x00000000 -#define regk_iop_sw_cpu_wr 0x00000003 -#define regk_iop_sw_cpu_yes 0x00000001 -#endif /* __iop_sw_cpu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_mpu_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_mpu_defs_asm.h deleted file mode 100644 index ffcc83b22d21..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_mpu_defs_asm.h +++ /dev/null @@ -1,1086 +0,0 @@ -#ifndef __iop_sw_mpu_defs_asm_h -#define __iop_sw_mpu_defs_asm_h - -/* - * This file is autogenerated from - * file: iop_sw_mpu.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_mpu_defs_asm.h iop_sw_mpu.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_sw_cfg_owner, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_sw_cfg_owner___cfg___lsb 0 -#define reg_iop_sw_mpu_rw_sw_cfg_owner___cfg___width 2 -#define reg_iop_sw_mpu_rw_sw_cfg_owner_offset 0 - -/* Register r_spu_trace, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_spu_trace_offset 4 - -/* Register r_spu_fsm_trace, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_spu_fsm_trace_offset 8 - -/* Register rw_mc_ctrl, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___lsb 0 -#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___width 1 -#define reg_iop_sw_mpu_rw_mc_ctrl___keep_owner___bit 0 -#define reg_iop_sw_mpu_rw_mc_ctrl___cmd___lsb 1 -#define reg_iop_sw_mpu_rw_mc_ctrl___cmd___width 2 -#define reg_iop_sw_mpu_rw_mc_ctrl___size___lsb 3 -#define reg_iop_sw_mpu_rw_mc_ctrl___size___width 3 -#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu_mem___lsb 6 -#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu_mem___width 1 -#define reg_iop_sw_mpu_rw_mc_ctrl___wr_spu_mem___bit 6 -#define reg_iop_sw_mpu_rw_mc_ctrl_offset 12 - -/* Register rw_mc_data, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_mc_data___val___lsb 0 -#define reg_iop_sw_mpu_rw_mc_data___val___width 32 -#define reg_iop_sw_mpu_rw_mc_data_offset 16 - -/* Register rw_mc_addr, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_mc_addr_offset 20 - -/* Register rs_mc_data, scope iop_sw_mpu, type rs */ -#define reg_iop_sw_mpu_rs_mc_data_offset 24 - -/* Register r_mc_data, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_mc_data_offset 28 - -/* Register r_mc_stat, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___lsb 0 -#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___width 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_cpu___bit 0 -#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___lsb 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___width 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_mpu___bit 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_spu___lsb 2 -#define reg_iop_sw_mpu_r_mc_stat___busy_spu___width 1 -#define reg_iop_sw_mpu_r_mc_stat___busy_spu___bit 2 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___lsb 3 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___width 1 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_cpu___bit 3 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___lsb 4 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___width 1 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_mpu___bit 4 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu___lsb 5 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu___width 1 -#define reg_iop_sw_mpu_r_mc_stat___owned_by_spu___bit 5 -#define reg_iop_sw_mpu_r_mc_stat_offset 32 - -/* Register rw_bus_clr_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus_clr_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus_clr_mask___byte0___width 8 -#define reg_iop_sw_mpu_rw_bus_clr_mask___byte1___lsb 8 -#define reg_iop_sw_mpu_rw_bus_clr_mask___byte1___width 8 -#define reg_iop_sw_mpu_rw_bus_clr_mask___byte2___lsb 16 -#define reg_iop_sw_mpu_rw_bus_clr_mask___byte2___width 8 -#define reg_iop_sw_mpu_rw_bus_clr_mask___byte3___lsb 24 -#define reg_iop_sw_mpu_rw_bus_clr_mask___byte3___width 8 -#define reg_iop_sw_mpu_rw_bus_clr_mask_offset 36 - -/* Register rw_bus_set_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus_set_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus_set_mask___byte0___width 8 -#define reg_iop_sw_mpu_rw_bus_set_mask___byte1___lsb 8 -#define reg_iop_sw_mpu_rw_bus_set_mask___byte1___width 8 -#define reg_iop_sw_mpu_rw_bus_set_mask___byte2___lsb 16 -#define reg_iop_sw_mpu_rw_bus_set_mask___byte2___width 8 -#define reg_iop_sw_mpu_rw_bus_set_mask___byte3___lsb 24 -#define reg_iop_sw_mpu_rw_bus_set_mask___byte3___width 8 -#define reg_iop_sw_mpu_rw_bus_set_mask_offset 40 - -/* Register rw_bus_oe_clr_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte0___width 1 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte0___bit 0 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte1___lsb 1 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte1___width 1 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte1___bit 1 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte2___lsb 2 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte2___width 1 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte2___bit 2 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte3___lsb 3 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte3___width 1 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask___byte3___bit 3 -#define reg_iop_sw_mpu_rw_bus_oe_clr_mask_offset 44 - -/* Register rw_bus_oe_set_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte0___lsb 0 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte0___width 1 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte0___bit 0 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte1___lsb 1 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte1___width 1 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte1___bit 1 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte2___lsb 2 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte2___width 1 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte2___bit 2 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte3___lsb 3 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte3___width 1 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask___byte3___bit 3 -#define reg_iop_sw_mpu_rw_bus_oe_set_mask_offset 48 - -/* Register r_bus_in, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_bus_in_offset 52 - -/* Register rw_gio_clr_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_gio_clr_mask___val___lsb 0 -#define reg_iop_sw_mpu_rw_gio_clr_mask___val___width 32 -#define reg_iop_sw_mpu_rw_gio_clr_mask_offset 56 - -/* Register rw_gio_set_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_gio_set_mask___val___lsb 0 -#define reg_iop_sw_mpu_rw_gio_set_mask___val___width 32 -#define reg_iop_sw_mpu_rw_gio_set_mask_offset 60 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_gio_oe_clr_mask___val___lsb 0 -#define reg_iop_sw_mpu_rw_gio_oe_clr_mask___val___width 32 -#define reg_iop_sw_mpu_rw_gio_oe_clr_mask_offset 64 - -/* Register rw_gio_oe_set_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_gio_oe_set_mask___val___lsb 0 -#define reg_iop_sw_mpu_rw_gio_oe_set_mask___val___width 32 -#define reg_iop_sw_mpu_rw_gio_oe_set_mask_offset 68 - -/* Register r_gio_in, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_gio_in_offset 72 - -/* Register rw_cpu_intr, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_cpu_intr___intr0___lsb 0 -#define reg_iop_sw_mpu_rw_cpu_intr___intr0___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr0___bit 0 -#define reg_iop_sw_mpu_rw_cpu_intr___intr1___lsb 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr1___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr1___bit 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr2___lsb 2 -#define reg_iop_sw_mpu_rw_cpu_intr___intr2___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr2___bit 2 -#define reg_iop_sw_mpu_rw_cpu_intr___intr3___lsb 3 -#define reg_iop_sw_mpu_rw_cpu_intr___intr3___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr3___bit 3 -#define reg_iop_sw_mpu_rw_cpu_intr___intr4___lsb 4 -#define reg_iop_sw_mpu_rw_cpu_intr___intr4___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr4___bit 4 -#define reg_iop_sw_mpu_rw_cpu_intr___intr5___lsb 5 -#define reg_iop_sw_mpu_rw_cpu_intr___intr5___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr5___bit 5 -#define reg_iop_sw_mpu_rw_cpu_intr___intr6___lsb 6 -#define reg_iop_sw_mpu_rw_cpu_intr___intr6___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr6___bit 6 -#define reg_iop_sw_mpu_rw_cpu_intr___intr7___lsb 7 -#define reg_iop_sw_mpu_rw_cpu_intr___intr7___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr7___bit 7 -#define reg_iop_sw_mpu_rw_cpu_intr___intr8___lsb 8 -#define reg_iop_sw_mpu_rw_cpu_intr___intr8___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr8___bit 8 -#define reg_iop_sw_mpu_rw_cpu_intr___intr9___lsb 9 -#define reg_iop_sw_mpu_rw_cpu_intr___intr9___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr9___bit 9 -#define reg_iop_sw_mpu_rw_cpu_intr___intr10___lsb 10 -#define reg_iop_sw_mpu_rw_cpu_intr___intr10___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr10___bit 10 -#define reg_iop_sw_mpu_rw_cpu_intr___intr11___lsb 11 -#define reg_iop_sw_mpu_rw_cpu_intr___intr11___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr11___bit 11 -#define reg_iop_sw_mpu_rw_cpu_intr___intr12___lsb 12 -#define reg_iop_sw_mpu_rw_cpu_intr___intr12___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr12___bit 12 -#define reg_iop_sw_mpu_rw_cpu_intr___intr13___lsb 13 -#define reg_iop_sw_mpu_rw_cpu_intr___intr13___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr13___bit 13 -#define reg_iop_sw_mpu_rw_cpu_intr___intr14___lsb 14 -#define reg_iop_sw_mpu_rw_cpu_intr___intr14___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr14___bit 14 -#define reg_iop_sw_mpu_rw_cpu_intr___intr15___lsb 15 -#define reg_iop_sw_mpu_rw_cpu_intr___intr15___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr15___bit 15 -#define reg_iop_sw_mpu_rw_cpu_intr___intr16___lsb 16 -#define reg_iop_sw_mpu_rw_cpu_intr___intr16___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr16___bit 16 -#define reg_iop_sw_mpu_rw_cpu_intr___intr17___lsb 17 -#define reg_iop_sw_mpu_rw_cpu_intr___intr17___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr17___bit 17 -#define reg_iop_sw_mpu_rw_cpu_intr___intr18___lsb 18 -#define reg_iop_sw_mpu_rw_cpu_intr___intr18___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr18___bit 18 -#define reg_iop_sw_mpu_rw_cpu_intr___intr19___lsb 19 -#define reg_iop_sw_mpu_rw_cpu_intr___intr19___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr19___bit 19 -#define reg_iop_sw_mpu_rw_cpu_intr___intr20___lsb 20 -#define reg_iop_sw_mpu_rw_cpu_intr___intr20___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr20___bit 20 -#define reg_iop_sw_mpu_rw_cpu_intr___intr21___lsb 21 -#define reg_iop_sw_mpu_rw_cpu_intr___intr21___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr21___bit 21 -#define reg_iop_sw_mpu_rw_cpu_intr___intr22___lsb 22 -#define reg_iop_sw_mpu_rw_cpu_intr___intr22___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr22___bit 22 -#define reg_iop_sw_mpu_rw_cpu_intr___intr23___lsb 23 -#define reg_iop_sw_mpu_rw_cpu_intr___intr23___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr23___bit 23 -#define reg_iop_sw_mpu_rw_cpu_intr___intr24___lsb 24 -#define reg_iop_sw_mpu_rw_cpu_intr___intr24___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr24___bit 24 -#define reg_iop_sw_mpu_rw_cpu_intr___intr25___lsb 25 -#define reg_iop_sw_mpu_rw_cpu_intr___intr25___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr25___bit 25 -#define reg_iop_sw_mpu_rw_cpu_intr___intr26___lsb 26 -#define reg_iop_sw_mpu_rw_cpu_intr___intr26___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr26___bit 26 -#define reg_iop_sw_mpu_rw_cpu_intr___intr27___lsb 27 -#define reg_iop_sw_mpu_rw_cpu_intr___intr27___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr27___bit 27 -#define reg_iop_sw_mpu_rw_cpu_intr___intr28___lsb 28 -#define reg_iop_sw_mpu_rw_cpu_intr___intr28___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr28___bit 28 -#define reg_iop_sw_mpu_rw_cpu_intr___intr29___lsb 29 -#define reg_iop_sw_mpu_rw_cpu_intr___intr29___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr29___bit 29 -#define reg_iop_sw_mpu_rw_cpu_intr___intr30___lsb 30 -#define reg_iop_sw_mpu_rw_cpu_intr___intr30___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr30___bit 30 -#define reg_iop_sw_mpu_rw_cpu_intr___intr31___lsb 31 -#define reg_iop_sw_mpu_rw_cpu_intr___intr31___width 1 -#define reg_iop_sw_mpu_rw_cpu_intr___intr31___bit 31 -#define reg_iop_sw_mpu_rw_cpu_intr_offset 76 - -/* Register r_cpu_intr, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_cpu_intr___intr0___lsb 0 -#define reg_iop_sw_mpu_r_cpu_intr___intr0___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr0___bit 0 -#define reg_iop_sw_mpu_r_cpu_intr___intr1___lsb 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr1___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr1___bit 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr2___lsb 2 -#define reg_iop_sw_mpu_r_cpu_intr___intr2___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr2___bit 2 -#define reg_iop_sw_mpu_r_cpu_intr___intr3___lsb 3 -#define reg_iop_sw_mpu_r_cpu_intr___intr3___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr3___bit 3 -#define reg_iop_sw_mpu_r_cpu_intr___intr4___lsb 4 -#define reg_iop_sw_mpu_r_cpu_intr___intr4___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr4___bit 4 -#define reg_iop_sw_mpu_r_cpu_intr___intr5___lsb 5 -#define reg_iop_sw_mpu_r_cpu_intr___intr5___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr5___bit 5 -#define reg_iop_sw_mpu_r_cpu_intr___intr6___lsb 6 -#define reg_iop_sw_mpu_r_cpu_intr___intr6___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr6___bit 6 -#define reg_iop_sw_mpu_r_cpu_intr___intr7___lsb 7 -#define reg_iop_sw_mpu_r_cpu_intr___intr7___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr7___bit 7 -#define reg_iop_sw_mpu_r_cpu_intr___intr8___lsb 8 -#define reg_iop_sw_mpu_r_cpu_intr___intr8___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr8___bit 8 -#define reg_iop_sw_mpu_r_cpu_intr___intr9___lsb 9 -#define reg_iop_sw_mpu_r_cpu_intr___intr9___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr9___bit 9 -#define reg_iop_sw_mpu_r_cpu_intr___intr10___lsb 10 -#define reg_iop_sw_mpu_r_cpu_intr___intr10___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr10___bit 10 -#define reg_iop_sw_mpu_r_cpu_intr___intr11___lsb 11 -#define reg_iop_sw_mpu_r_cpu_intr___intr11___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr11___bit 11 -#define reg_iop_sw_mpu_r_cpu_intr___intr12___lsb 12 -#define reg_iop_sw_mpu_r_cpu_intr___intr12___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr12___bit 12 -#define reg_iop_sw_mpu_r_cpu_intr___intr13___lsb 13 -#define reg_iop_sw_mpu_r_cpu_intr___intr13___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr13___bit 13 -#define reg_iop_sw_mpu_r_cpu_intr___intr14___lsb 14 -#define reg_iop_sw_mpu_r_cpu_intr___intr14___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr14___bit 14 -#define reg_iop_sw_mpu_r_cpu_intr___intr15___lsb 15 -#define reg_iop_sw_mpu_r_cpu_intr___intr15___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr15___bit 15 -#define reg_iop_sw_mpu_r_cpu_intr___intr16___lsb 16 -#define reg_iop_sw_mpu_r_cpu_intr___intr16___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr16___bit 16 -#define reg_iop_sw_mpu_r_cpu_intr___intr17___lsb 17 -#define reg_iop_sw_mpu_r_cpu_intr___intr17___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr17___bit 17 -#define reg_iop_sw_mpu_r_cpu_intr___intr18___lsb 18 -#define reg_iop_sw_mpu_r_cpu_intr___intr18___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr18___bit 18 -#define reg_iop_sw_mpu_r_cpu_intr___intr19___lsb 19 -#define reg_iop_sw_mpu_r_cpu_intr___intr19___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr19___bit 19 -#define reg_iop_sw_mpu_r_cpu_intr___intr20___lsb 20 -#define reg_iop_sw_mpu_r_cpu_intr___intr20___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr20___bit 20 -#define reg_iop_sw_mpu_r_cpu_intr___intr21___lsb 21 -#define reg_iop_sw_mpu_r_cpu_intr___intr21___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr21___bit 21 -#define reg_iop_sw_mpu_r_cpu_intr___intr22___lsb 22 -#define reg_iop_sw_mpu_r_cpu_intr___intr22___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr22___bit 22 -#define reg_iop_sw_mpu_r_cpu_intr___intr23___lsb 23 -#define reg_iop_sw_mpu_r_cpu_intr___intr23___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr23___bit 23 -#define reg_iop_sw_mpu_r_cpu_intr___intr24___lsb 24 -#define reg_iop_sw_mpu_r_cpu_intr___intr24___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr24___bit 24 -#define reg_iop_sw_mpu_r_cpu_intr___intr25___lsb 25 -#define reg_iop_sw_mpu_r_cpu_intr___intr25___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr25___bit 25 -#define reg_iop_sw_mpu_r_cpu_intr___intr26___lsb 26 -#define reg_iop_sw_mpu_r_cpu_intr___intr26___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr26___bit 26 -#define reg_iop_sw_mpu_r_cpu_intr___intr27___lsb 27 -#define reg_iop_sw_mpu_r_cpu_intr___intr27___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr27___bit 27 -#define reg_iop_sw_mpu_r_cpu_intr___intr28___lsb 28 -#define reg_iop_sw_mpu_r_cpu_intr___intr28___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr28___bit 28 -#define reg_iop_sw_mpu_r_cpu_intr___intr29___lsb 29 -#define reg_iop_sw_mpu_r_cpu_intr___intr29___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr29___bit 29 -#define reg_iop_sw_mpu_r_cpu_intr___intr30___lsb 30 -#define reg_iop_sw_mpu_r_cpu_intr___intr30___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr30___bit 30 -#define reg_iop_sw_mpu_r_cpu_intr___intr31___lsb 31 -#define reg_iop_sw_mpu_r_cpu_intr___intr31___width 1 -#define reg_iop_sw_mpu_r_cpu_intr___intr31___bit 31 -#define reg_iop_sw_mpu_r_cpu_intr_offset 80 - -/* Register rw_intr_grp0_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr0___lsb 0 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr0___bit 0 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___lsb 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp0___bit 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___lsb 2 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp0___bit 2 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out___lsb 3 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out___bit 3 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr1___lsb 4 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr1___bit 4 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___lsb 5 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp1___bit 5 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___lsb 6 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___timer_grp1___bit 6 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in___lsb 7 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in___bit 7 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr2___lsb 8 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr2___bit 8 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___lsb 9 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp2___bit 9 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out_extra___lsb 10 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_out_extra___bit 10 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out___lsb 11 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_out___bit 11 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr3___lsb 12 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___spu_intr3___bit 12 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___lsb 13 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___trigger_grp3___bit 13 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in_extra___lsb 14 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___fifo_in_extra___bit 14 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in___lsb 15 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in___width 1 -#define reg_iop_sw_mpu_rw_intr_grp0_mask___dmc_in___bit 15 -#define reg_iop_sw_mpu_rw_intr_grp0_mask_offset 84 - -/* Register rw_ack_intr_grp0, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr0___lsb 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr0___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr0___bit 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr1___lsb 4 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr1___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr1___bit 4 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr2___lsb 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr2___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr2___bit 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr3___lsb 12 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr3___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp0___spu_intr3___bit 12 -#define reg_iop_sw_mpu_rw_ack_intr_grp0_offset 88 - -/* Register r_intr_grp0, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr0___lsb 0 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr0___bit 0 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___lsb 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp0___bit 1 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___lsb 2 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp0___bit 2 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out___lsb 3 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out___bit 3 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr1___lsb 4 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr1___bit 4 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___lsb 5 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp1___bit 5 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___lsb 6 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___timer_grp1___bit 6 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in___lsb 7 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in___bit 7 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr2___lsb 8 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr2___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr2___bit 8 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___lsb 9 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp2___bit 9 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out_extra___lsb 10 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_out_extra___bit 10 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_out___lsb 11 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_out___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_out___bit 11 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr3___lsb 12 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr3___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___spu_intr3___bit 12 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___lsb 13 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___trigger_grp3___bit 13 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in_extra___lsb 14 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___fifo_in_extra___bit 14 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_in___lsb 15 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_in___width 1 -#define reg_iop_sw_mpu_r_intr_grp0___dmc_in___bit 15 -#define reg_iop_sw_mpu_r_intr_grp0_offset 92 - -/* Register r_masked_intr_grp0, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr0___lsb 0 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr0___bit 0 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___lsb 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp0___bit 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___lsb 2 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp0___bit 2 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out___lsb 3 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out___bit 3 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr1___lsb 4 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr1___bit 4 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___lsb 5 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp1___bit 5 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___lsb 6 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___timer_grp1___bit 6 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in___lsb 7 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in___bit 7 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr2___lsb 8 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr2___bit 8 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___lsb 9 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp2___bit 9 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out_extra___lsb 10 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_out_extra___bit 10 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out___lsb 11 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_out___bit 11 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr3___lsb 12 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___spu_intr3___bit 12 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___lsb 13 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___trigger_grp3___bit 13 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in_extra___lsb 14 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___fifo_in_extra___bit 14 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in___lsb 15 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp0___dmc_in___bit 15 -#define reg_iop_sw_mpu_r_masked_intr_grp0_offset 96 - -/* Register rw_intr_grp1_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr4___lsb 0 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr4___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr4___bit 0 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___lsb 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp4___bit 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out_extra___lsb 2 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out_extra___bit 2 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out___lsb 3 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_out___bit 3 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr5___lsb 4 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr5___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr5___bit 4 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___lsb 5 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp5___bit 5 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in_extra___lsb 6 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in_extra___bit 6 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in___lsb 7 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___dmc_in___bit 7 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr6___lsb 8 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr6___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr6___bit 8 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___lsb 9 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp6___bit 9 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___lsb 10 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp0___bit 10 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out___lsb 11 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_out___bit 11 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr7___lsb 12 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr7___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___spu_intr7___bit 12 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___lsb 13 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___trigger_grp7___bit 13 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___lsb 14 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___timer_grp1___bit 14 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in___lsb 15 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in___width 1 -#define reg_iop_sw_mpu_rw_intr_grp1_mask___fifo_in___bit 15 -#define reg_iop_sw_mpu_rw_intr_grp1_mask_offset 100 - -/* Register rw_ack_intr_grp1, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr4___lsb 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr4___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr4___bit 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr5___lsb 4 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr5___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr5___bit 4 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr6___lsb 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr6___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr6___bit 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr7___lsb 12 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr7___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp1___spu_intr7___bit 12 -#define reg_iop_sw_mpu_rw_ack_intr_grp1_offset 104 - -/* Register r_intr_grp1, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr4___lsb 0 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr4___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr4___bit 0 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___lsb 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp4___bit 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out_extra___lsb 2 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out_extra___bit 2 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_out___lsb 3 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_out___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_out___bit 3 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr5___lsb 4 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr5___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr5___bit 4 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___lsb 5 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp5___bit 5 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in_extra___lsb 6 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in_extra___bit 6 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_in___lsb 7 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_in___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___dmc_in___bit 7 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr6___lsb 8 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr6___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr6___bit 8 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___lsb 9 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp6___bit 9 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___lsb 10 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp0___bit 10 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out___lsb 11 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_out___bit 11 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr7___lsb 12 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr7___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___spu_intr7___bit 12 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___lsb 13 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___trigger_grp7___bit 13 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___lsb 14 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___timer_grp1___bit 14 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in___lsb 15 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in___width 1 -#define reg_iop_sw_mpu_r_intr_grp1___fifo_in___bit 15 -#define reg_iop_sw_mpu_r_intr_grp1_offset 108 - -/* Register r_masked_intr_grp1, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr4___lsb 0 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr4___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr4___bit 0 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___lsb 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp4___bit 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out_extra___lsb 2 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out_extra___bit 2 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out___lsb 3 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_out___bit 3 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr5___lsb 4 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr5___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr5___bit 4 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___lsb 5 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp5___bit 5 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in_extra___lsb 6 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in_extra___bit 6 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in___lsb 7 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___dmc_in___bit 7 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr6___lsb 8 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr6___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr6___bit 8 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___lsb 9 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp6___bit 9 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___lsb 10 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp0___bit 10 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out___lsb 11 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_out___bit 11 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr7___lsb 12 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr7___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___spu_intr7___bit 12 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___lsb 13 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___trigger_grp7___bit 13 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___lsb 14 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___timer_grp1___bit 14 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in___lsb 15 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp1___fifo_in___bit 15 -#define reg_iop_sw_mpu_r_masked_intr_grp1_offset 112 - -/* Register rw_intr_grp2_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr8___lsb 0 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr8___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr8___bit 0 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___lsb 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp0___bit 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___lsb 2 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp0___bit 2 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out___lsb 3 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out___bit 3 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr9___lsb 4 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr9___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr9___bit 4 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___lsb 5 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp1___bit 5 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___lsb 6 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___timer_grp1___bit 6 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in___lsb 7 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in___bit 7 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr10___lsb 8 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr10___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr10___bit 8 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___lsb 9 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp2___bit 9 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out_extra___lsb 10 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_out_extra___bit 10 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out___lsb 11 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_out___bit 11 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr11___lsb 12 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr11___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___spu_intr11___bit 12 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___lsb 13 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___trigger_grp3___bit 13 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in_extra___lsb 14 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___fifo_in_extra___bit 14 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in___lsb 15 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in___width 1 -#define reg_iop_sw_mpu_rw_intr_grp2_mask___dmc_in___bit 15 -#define reg_iop_sw_mpu_rw_intr_grp2_mask_offset 116 - -/* Register rw_ack_intr_grp2, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr8___lsb 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr8___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr8___bit 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr9___lsb 4 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr9___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr9___bit 4 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr10___lsb 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr10___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr10___bit 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr11___lsb 12 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr11___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp2___spu_intr11___bit 12 -#define reg_iop_sw_mpu_rw_ack_intr_grp2_offset 120 - -/* Register r_intr_grp2, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr8___lsb 0 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr8___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr8___bit 0 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___lsb 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp0___bit 1 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___lsb 2 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp0___bit 2 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out___lsb 3 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out___bit 3 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr9___lsb 4 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr9___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr9___bit 4 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___lsb 5 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp1___bit 5 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___lsb 6 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___timer_grp1___bit 6 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in___lsb 7 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in___bit 7 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr10___lsb 8 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr10___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr10___bit 8 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___lsb 9 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp2___bit 9 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out_extra___lsb 10 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_out_extra___bit 10 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_out___lsb 11 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_out___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_out___bit 11 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr11___lsb 12 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr11___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___spu_intr11___bit 12 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___lsb 13 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___trigger_grp3___bit 13 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in_extra___lsb 14 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___fifo_in_extra___bit 14 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_in___lsb 15 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_in___width 1 -#define reg_iop_sw_mpu_r_intr_grp2___dmc_in___bit 15 -#define reg_iop_sw_mpu_r_intr_grp2_offset 124 - -/* Register r_masked_intr_grp2, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr8___lsb 0 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr8___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr8___bit 0 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___lsb 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp0___bit 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___lsb 2 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp0___bit 2 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out___lsb 3 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out___bit 3 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr9___lsb 4 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr9___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr9___bit 4 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___lsb 5 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp1___bit 5 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___lsb 6 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___timer_grp1___bit 6 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in___lsb 7 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in___bit 7 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr10___lsb 8 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr10___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr10___bit 8 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___lsb 9 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp2___bit 9 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out_extra___lsb 10 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_out_extra___bit 10 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out___lsb 11 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_out___bit 11 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr11___lsb 12 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr11___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___spu_intr11___bit 12 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___lsb 13 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___trigger_grp3___bit 13 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in_extra___lsb 14 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___fifo_in_extra___bit 14 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in___lsb 15 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp2___dmc_in___bit 15 -#define reg_iop_sw_mpu_r_masked_intr_grp2_offset 128 - -/* Register rw_intr_grp3_mask, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr12___lsb 0 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr12___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr12___bit 0 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___lsb 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp4___bit 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out_extra___lsb 2 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out_extra___bit 2 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out___lsb 3 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_out___bit 3 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr13___lsb 4 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr13___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr13___bit 4 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___lsb 5 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp5___bit 5 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in_extra___lsb 6 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in_extra___bit 6 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in___lsb 7 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___dmc_in___bit 7 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr14___lsb 8 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr14___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr14___bit 8 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___lsb 9 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp6___bit 9 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___lsb 10 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp0___bit 10 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out___lsb 11 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_out___bit 11 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr15___lsb 12 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr15___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___spu_intr15___bit 12 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___lsb 13 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___trigger_grp7___bit 13 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___lsb 14 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___timer_grp1___bit 14 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in___lsb 15 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in___width 1 -#define reg_iop_sw_mpu_rw_intr_grp3_mask___fifo_in___bit 15 -#define reg_iop_sw_mpu_rw_intr_grp3_mask_offset 132 - -/* Register rw_ack_intr_grp3, scope iop_sw_mpu, type rw */ -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr12___lsb 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr12___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr12___bit 0 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr13___lsb 4 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr13___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr13___bit 4 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr14___lsb 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr14___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr14___bit 8 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr15___lsb 12 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr15___width 1 -#define reg_iop_sw_mpu_rw_ack_intr_grp3___spu_intr15___bit 12 -#define reg_iop_sw_mpu_rw_ack_intr_grp3_offset 136 - -/* Register r_intr_grp3, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr12___lsb 0 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr12___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr12___bit 0 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___lsb 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp4___bit 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out_extra___lsb 2 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out_extra___bit 2 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_out___lsb 3 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_out___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_out___bit 3 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr13___lsb 4 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr13___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr13___bit 4 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___lsb 5 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp5___bit 5 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in_extra___lsb 6 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in_extra___bit 6 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_in___lsb 7 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_in___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___dmc_in___bit 7 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr14___lsb 8 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr14___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr14___bit 8 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___lsb 9 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp6___bit 9 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___lsb 10 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp0___bit 10 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out___lsb 11 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_out___bit 11 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr15___lsb 12 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr15___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___spu_intr15___bit 12 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___lsb 13 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___trigger_grp7___bit 13 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___lsb 14 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___timer_grp1___bit 14 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in___lsb 15 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in___width 1 -#define reg_iop_sw_mpu_r_intr_grp3___fifo_in___bit 15 -#define reg_iop_sw_mpu_r_intr_grp3_offset 140 - -/* Register r_masked_intr_grp3, scope iop_sw_mpu, type r */ -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr12___lsb 0 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr12___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr12___bit 0 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___lsb 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp4___bit 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out_extra___lsb 2 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out_extra___bit 2 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out___lsb 3 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_out___bit 3 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr13___lsb 4 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr13___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr13___bit 4 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___lsb 5 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp5___bit 5 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in_extra___lsb 6 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in_extra___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in_extra___bit 6 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in___lsb 7 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___dmc_in___bit 7 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr14___lsb 8 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr14___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr14___bit 8 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___lsb 9 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp6___bit 9 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___lsb 10 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp0___bit 10 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out___lsb 11 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_out___bit 11 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr15___lsb 12 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr15___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___spu_intr15___bit 12 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___lsb 13 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___trigger_grp7___bit 13 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___lsb 14 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___timer_grp1___bit 14 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in___lsb 15 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in___width 1 -#define reg_iop_sw_mpu_r_masked_intr_grp3___fifo_in___bit 15 -#define reg_iop_sw_mpu_r_masked_intr_grp3_offset 144 - - -/* Constants */ -#define regk_iop_sw_mpu_copy 0x00000000 -#define regk_iop_sw_mpu_cpu 0x00000000 -#define regk_iop_sw_mpu_mpu 0x00000001 -#define regk_iop_sw_mpu_no 0x00000000 -#define regk_iop_sw_mpu_nop 0x00000000 -#define regk_iop_sw_mpu_rd 0x00000002 -#define regk_iop_sw_mpu_reg_copy 0x00000001 -#define regk_iop_sw_mpu_rw_bus_clr_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_bus_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_bus_oe_set_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_bus_set_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_gio_clr_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_gio_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_gio_oe_set_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_gio_set_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_intr_grp0_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_intr_grp1_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_intr_grp2_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_intr_grp3_mask_default 0x00000000 -#define regk_iop_sw_mpu_rw_sw_cfg_owner_default 0x00000000 -#define regk_iop_sw_mpu_set 0x00000001 -#define regk_iop_sw_mpu_spu 0x00000002 -#define regk_iop_sw_mpu_wr 0x00000003 -#define regk_iop_sw_mpu_yes 0x00000001 -#endif /* __iop_sw_mpu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_spu_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_spu_defs_asm.h deleted file mode 100644 index 67a745338087..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_sw_spu_defs_asm.h +++ /dev/null @@ -1,523 +0,0 @@ -#ifndef __iop_sw_spu_defs_asm_h -#define __iop_sw_spu_defs_asm_h - -/* - * This file is autogenerated from - * file: iop_sw_spu.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_sw_spu_defs_asm.h iop_sw_spu.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register r_mpu_trace, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_mpu_trace_offset 0 - -/* Register rw_mc_ctrl, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___lsb 0 -#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___width 1 -#define reg_iop_sw_spu_rw_mc_ctrl___keep_owner___bit 0 -#define reg_iop_sw_spu_rw_mc_ctrl___cmd___lsb 1 -#define reg_iop_sw_spu_rw_mc_ctrl___cmd___width 2 -#define reg_iop_sw_spu_rw_mc_ctrl___size___lsb 3 -#define reg_iop_sw_spu_rw_mc_ctrl___size___width 3 -#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu_mem___lsb 6 -#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu_mem___width 1 -#define reg_iop_sw_spu_rw_mc_ctrl___wr_spu_mem___bit 6 -#define reg_iop_sw_spu_rw_mc_ctrl_offset 4 - -/* Register rw_mc_data, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_mc_data___val___lsb 0 -#define reg_iop_sw_spu_rw_mc_data___val___width 32 -#define reg_iop_sw_spu_rw_mc_data_offset 8 - -/* Register rw_mc_addr, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_mc_addr_offset 12 - -/* Register rs_mc_data, scope iop_sw_spu, type rs */ -#define reg_iop_sw_spu_rs_mc_data_offset 16 - -/* Register r_mc_data, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_mc_data_offset 20 - -/* Register r_mc_stat, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_mc_stat___busy_cpu___lsb 0 -#define reg_iop_sw_spu_r_mc_stat___busy_cpu___width 1 -#define reg_iop_sw_spu_r_mc_stat___busy_cpu___bit 0 -#define reg_iop_sw_spu_r_mc_stat___busy_mpu___lsb 1 -#define reg_iop_sw_spu_r_mc_stat___busy_mpu___width 1 -#define reg_iop_sw_spu_r_mc_stat___busy_mpu___bit 1 -#define reg_iop_sw_spu_r_mc_stat___busy_spu___lsb 2 -#define reg_iop_sw_spu_r_mc_stat___busy_spu___width 1 -#define reg_iop_sw_spu_r_mc_stat___busy_spu___bit 2 -#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___lsb 3 -#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___width 1 -#define reg_iop_sw_spu_r_mc_stat___owned_by_cpu___bit 3 -#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___lsb 4 -#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___width 1 -#define reg_iop_sw_spu_r_mc_stat___owned_by_mpu___bit 4 -#define reg_iop_sw_spu_r_mc_stat___owned_by_spu___lsb 5 -#define reg_iop_sw_spu_r_mc_stat___owned_by_spu___width 1 -#define reg_iop_sw_spu_r_mc_stat___owned_by_spu___bit 5 -#define reg_iop_sw_spu_r_mc_stat_offset 24 - -/* Register rw_bus_clr_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus_clr_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus_clr_mask___byte0___width 8 -#define reg_iop_sw_spu_rw_bus_clr_mask___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus_clr_mask___byte1___width 8 -#define reg_iop_sw_spu_rw_bus_clr_mask___byte2___lsb 16 -#define reg_iop_sw_spu_rw_bus_clr_mask___byte2___width 8 -#define reg_iop_sw_spu_rw_bus_clr_mask___byte3___lsb 24 -#define reg_iop_sw_spu_rw_bus_clr_mask___byte3___width 8 -#define reg_iop_sw_spu_rw_bus_clr_mask_offset 28 - -/* Register rw_bus_set_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus_set_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus_set_mask___byte0___width 8 -#define reg_iop_sw_spu_rw_bus_set_mask___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus_set_mask___byte1___width 8 -#define reg_iop_sw_spu_rw_bus_set_mask___byte2___lsb 16 -#define reg_iop_sw_spu_rw_bus_set_mask___byte2___width 8 -#define reg_iop_sw_spu_rw_bus_set_mask___byte3___lsb 24 -#define reg_iop_sw_spu_rw_bus_set_mask___byte3___width 8 -#define reg_iop_sw_spu_rw_bus_set_mask_offset 32 - -/* Register rw_bus_oe_clr_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte0___width 1 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte0___bit 0 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte1___lsb 1 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte1___width 1 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte1___bit 1 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte2___lsb 2 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte2___width 1 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte2___bit 2 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte3___lsb 3 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte3___width 1 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask___byte3___bit 3 -#define reg_iop_sw_spu_rw_bus_oe_clr_mask_offset 36 - -/* Register rw_bus_oe_set_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte0___width 1 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte0___bit 0 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte1___lsb 1 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte1___width 1 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte1___bit 1 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte2___lsb 2 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte2___width 1 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte2___bit 2 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte3___lsb 3 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte3___width 1 -#define reg_iop_sw_spu_rw_bus_oe_set_mask___byte3___bit 3 -#define reg_iop_sw_spu_rw_bus_oe_set_mask_offset 40 - -/* Register r_bus_in, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_bus_in_offset 44 - -/* Register rw_gio_clr_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_clr_mask___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_clr_mask___val___width 32 -#define reg_iop_sw_spu_rw_gio_clr_mask_offset 48 - -/* Register rw_gio_set_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_set_mask___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_set_mask___val___width 32 -#define reg_iop_sw_spu_rw_gio_set_mask_offset 52 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_clr_mask___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask___val___width 32 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_offset 56 - -/* Register rw_gio_oe_set_mask, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_set_mask___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_set_mask___val___width 32 -#define reg_iop_sw_spu_rw_gio_oe_set_mask_offset 60 - -/* Register r_gio_in, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_gio_in_offset 64 - -/* Register rw_bus_clr_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte0___width 8 -#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus_clr_mask_lo___byte1___width 8 -#define reg_iop_sw_spu_rw_bus_clr_mask_lo_offset 68 - -/* Register rw_bus_clr_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte2___lsb 0 -#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte2___width 8 -#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte3___lsb 8 -#define reg_iop_sw_spu_rw_bus_clr_mask_hi___byte3___width 8 -#define reg_iop_sw_spu_rw_bus_clr_mask_hi_offset 72 - -/* Register rw_bus_set_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte0___lsb 0 -#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte0___width 8 -#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte1___lsb 8 -#define reg_iop_sw_spu_rw_bus_set_mask_lo___byte1___width 8 -#define reg_iop_sw_spu_rw_bus_set_mask_lo_offset 76 - -/* Register rw_bus_set_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte2___lsb 0 -#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte2___width 8 -#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte3___lsb 8 -#define reg_iop_sw_spu_rw_bus_set_mask_hi___byte3___width 8 -#define reg_iop_sw_spu_rw_bus_set_mask_hi_offset 80 - -/* Register rw_gio_clr_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_clr_mask_lo___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_clr_mask_lo___val___width 16 -#define reg_iop_sw_spu_rw_gio_clr_mask_lo_offset 84 - -/* Register rw_gio_clr_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_clr_mask_hi___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_clr_mask_hi___val___width 16 -#define reg_iop_sw_spu_rw_gio_clr_mask_hi_offset 88 - -/* Register rw_gio_set_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_set_mask_lo___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_set_mask_lo___val___width 16 -#define reg_iop_sw_spu_rw_gio_set_mask_lo_offset 92 - -/* Register rw_gio_set_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_set_mask_hi___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_set_mask_hi___val___width 16 -#define reg_iop_sw_spu_rw_gio_set_mask_hi_offset 96 - -/* Register rw_gio_oe_clr_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo___val___width 16 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_lo_offset 100 - -/* Register rw_gio_oe_clr_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi___val___width 16 -#define reg_iop_sw_spu_rw_gio_oe_clr_mask_hi_offset 104 - -/* Register rw_gio_oe_set_mask_lo, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo___val___width 16 -#define reg_iop_sw_spu_rw_gio_oe_set_mask_lo_offset 108 - -/* Register rw_gio_oe_set_mask_hi, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi___val___lsb 0 -#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi___val___width 16 -#define reg_iop_sw_spu_rw_gio_oe_set_mask_hi_offset 112 - -/* Register rw_cpu_intr, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_cpu_intr___intr0___lsb 0 -#define reg_iop_sw_spu_rw_cpu_intr___intr0___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr0___bit 0 -#define reg_iop_sw_spu_rw_cpu_intr___intr1___lsb 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr1___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr1___bit 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr2___lsb 2 -#define reg_iop_sw_spu_rw_cpu_intr___intr2___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr2___bit 2 -#define reg_iop_sw_spu_rw_cpu_intr___intr3___lsb 3 -#define reg_iop_sw_spu_rw_cpu_intr___intr3___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr3___bit 3 -#define reg_iop_sw_spu_rw_cpu_intr___intr4___lsb 4 -#define reg_iop_sw_spu_rw_cpu_intr___intr4___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr4___bit 4 -#define reg_iop_sw_spu_rw_cpu_intr___intr5___lsb 5 -#define reg_iop_sw_spu_rw_cpu_intr___intr5___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr5___bit 5 -#define reg_iop_sw_spu_rw_cpu_intr___intr6___lsb 6 -#define reg_iop_sw_spu_rw_cpu_intr___intr6___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr6___bit 6 -#define reg_iop_sw_spu_rw_cpu_intr___intr7___lsb 7 -#define reg_iop_sw_spu_rw_cpu_intr___intr7___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr7___bit 7 -#define reg_iop_sw_spu_rw_cpu_intr___intr8___lsb 8 -#define reg_iop_sw_spu_rw_cpu_intr___intr8___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr8___bit 8 -#define reg_iop_sw_spu_rw_cpu_intr___intr9___lsb 9 -#define reg_iop_sw_spu_rw_cpu_intr___intr9___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr9___bit 9 -#define reg_iop_sw_spu_rw_cpu_intr___intr10___lsb 10 -#define reg_iop_sw_spu_rw_cpu_intr___intr10___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr10___bit 10 -#define reg_iop_sw_spu_rw_cpu_intr___intr11___lsb 11 -#define reg_iop_sw_spu_rw_cpu_intr___intr11___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr11___bit 11 -#define reg_iop_sw_spu_rw_cpu_intr___intr12___lsb 12 -#define reg_iop_sw_spu_rw_cpu_intr___intr12___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr12___bit 12 -#define reg_iop_sw_spu_rw_cpu_intr___intr13___lsb 13 -#define reg_iop_sw_spu_rw_cpu_intr___intr13___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr13___bit 13 -#define reg_iop_sw_spu_rw_cpu_intr___intr14___lsb 14 -#define reg_iop_sw_spu_rw_cpu_intr___intr14___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr14___bit 14 -#define reg_iop_sw_spu_rw_cpu_intr___intr15___lsb 15 -#define reg_iop_sw_spu_rw_cpu_intr___intr15___width 1 -#define reg_iop_sw_spu_rw_cpu_intr___intr15___bit 15 -#define reg_iop_sw_spu_rw_cpu_intr_offset 116 - -/* Register r_cpu_intr, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_cpu_intr___intr0___lsb 0 -#define reg_iop_sw_spu_r_cpu_intr___intr0___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr0___bit 0 -#define reg_iop_sw_spu_r_cpu_intr___intr1___lsb 1 -#define reg_iop_sw_spu_r_cpu_intr___intr1___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr1___bit 1 -#define reg_iop_sw_spu_r_cpu_intr___intr2___lsb 2 -#define reg_iop_sw_spu_r_cpu_intr___intr2___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr2___bit 2 -#define reg_iop_sw_spu_r_cpu_intr___intr3___lsb 3 -#define reg_iop_sw_spu_r_cpu_intr___intr3___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr3___bit 3 -#define reg_iop_sw_spu_r_cpu_intr___intr4___lsb 4 -#define reg_iop_sw_spu_r_cpu_intr___intr4___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr4___bit 4 -#define reg_iop_sw_spu_r_cpu_intr___intr5___lsb 5 -#define reg_iop_sw_spu_r_cpu_intr___intr5___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr5___bit 5 -#define reg_iop_sw_spu_r_cpu_intr___intr6___lsb 6 -#define reg_iop_sw_spu_r_cpu_intr___intr6___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr6___bit 6 -#define reg_iop_sw_spu_r_cpu_intr___intr7___lsb 7 -#define reg_iop_sw_spu_r_cpu_intr___intr7___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr7___bit 7 -#define reg_iop_sw_spu_r_cpu_intr___intr8___lsb 8 -#define reg_iop_sw_spu_r_cpu_intr___intr8___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr8___bit 8 -#define reg_iop_sw_spu_r_cpu_intr___intr9___lsb 9 -#define reg_iop_sw_spu_r_cpu_intr___intr9___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr9___bit 9 -#define reg_iop_sw_spu_r_cpu_intr___intr10___lsb 10 -#define reg_iop_sw_spu_r_cpu_intr___intr10___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr10___bit 10 -#define reg_iop_sw_spu_r_cpu_intr___intr11___lsb 11 -#define reg_iop_sw_spu_r_cpu_intr___intr11___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr11___bit 11 -#define reg_iop_sw_spu_r_cpu_intr___intr12___lsb 12 -#define reg_iop_sw_spu_r_cpu_intr___intr12___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr12___bit 12 -#define reg_iop_sw_spu_r_cpu_intr___intr13___lsb 13 -#define reg_iop_sw_spu_r_cpu_intr___intr13___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr13___bit 13 -#define reg_iop_sw_spu_r_cpu_intr___intr14___lsb 14 -#define reg_iop_sw_spu_r_cpu_intr___intr14___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr14___bit 14 -#define reg_iop_sw_spu_r_cpu_intr___intr15___lsb 15 -#define reg_iop_sw_spu_r_cpu_intr___intr15___width 1 -#define reg_iop_sw_spu_r_cpu_intr___intr15___bit 15 -#define reg_iop_sw_spu_r_cpu_intr_offset 120 - -/* Register r_hw_intr, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___lsb 0 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp0___bit 0 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___lsb 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp1___bit 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___lsb 2 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp2___bit 2 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___lsb 3 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp3___bit 3 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___lsb 4 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp4___bit 4 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___lsb 5 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp5___bit 5 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___lsb 6 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp6___bit 6 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___lsb 7 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___width 1 -#define reg_iop_sw_spu_r_hw_intr___trigger_grp7___bit 7 -#define reg_iop_sw_spu_r_hw_intr___timer_grp0___lsb 8 -#define reg_iop_sw_spu_r_hw_intr___timer_grp0___width 1 -#define reg_iop_sw_spu_r_hw_intr___timer_grp0___bit 8 -#define reg_iop_sw_spu_r_hw_intr___timer_grp1___lsb 9 -#define reg_iop_sw_spu_r_hw_intr___timer_grp1___width 1 -#define reg_iop_sw_spu_r_hw_intr___timer_grp1___bit 9 -#define reg_iop_sw_spu_r_hw_intr___fifo_out___lsb 10 -#define reg_iop_sw_spu_r_hw_intr___fifo_out___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_out___bit 10 -#define reg_iop_sw_spu_r_hw_intr___fifo_out_extra___lsb 11 -#define reg_iop_sw_spu_r_hw_intr___fifo_out_extra___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_out_extra___bit 11 -#define reg_iop_sw_spu_r_hw_intr___fifo_in___lsb 12 -#define reg_iop_sw_spu_r_hw_intr___fifo_in___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_in___bit 12 -#define reg_iop_sw_spu_r_hw_intr___fifo_in_extra___lsb 13 -#define reg_iop_sw_spu_r_hw_intr___fifo_in_extra___width 1 -#define reg_iop_sw_spu_r_hw_intr___fifo_in_extra___bit 13 -#define reg_iop_sw_spu_r_hw_intr___dmc_out___lsb 14 -#define reg_iop_sw_spu_r_hw_intr___dmc_out___width 1 -#define reg_iop_sw_spu_r_hw_intr___dmc_out___bit 14 -#define reg_iop_sw_spu_r_hw_intr___dmc_in___lsb 15 -#define reg_iop_sw_spu_r_hw_intr___dmc_in___width 1 -#define reg_iop_sw_spu_r_hw_intr___dmc_in___bit 15 -#define reg_iop_sw_spu_r_hw_intr_offset 124 - -/* Register rw_mpu_intr, scope iop_sw_spu, type rw */ -#define reg_iop_sw_spu_rw_mpu_intr___intr0___lsb 0 -#define reg_iop_sw_spu_rw_mpu_intr___intr0___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr0___bit 0 -#define reg_iop_sw_spu_rw_mpu_intr___intr1___lsb 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr1___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr1___bit 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr2___lsb 2 -#define reg_iop_sw_spu_rw_mpu_intr___intr2___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr2___bit 2 -#define reg_iop_sw_spu_rw_mpu_intr___intr3___lsb 3 -#define reg_iop_sw_spu_rw_mpu_intr___intr3___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr3___bit 3 -#define reg_iop_sw_spu_rw_mpu_intr___intr4___lsb 4 -#define reg_iop_sw_spu_rw_mpu_intr___intr4___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr4___bit 4 -#define reg_iop_sw_spu_rw_mpu_intr___intr5___lsb 5 -#define reg_iop_sw_spu_rw_mpu_intr___intr5___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr5___bit 5 -#define reg_iop_sw_spu_rw_mpu_intr___intr6___lsb 6 -#define reg_iop_sw_spu_rw_mpu_intr___intr6___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr6___bit 6 -#define reg_iop_sw_spu_rw_mpu_intr___intr7___lsb 7 -#define reg_iop_sw_spu_rw_mpu_intr___intr7___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr7___bit 7 -#define reg_iop_sw_spu_rw_mpu_intr___intr8___lsb 8 -#define reg_iop_sw_spu_rw_mpu_intr___intr8___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr8___bit 8 -#define reg_iop_sw_spu_rw_mpu_intr___intr9___lsb 9 -#define reg_iop_sw_spu_rw_mpu_intr___intr9___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr9___bit 9 -#define reg_iop_sw_spu_rw_mpu_intr___intr10___lsb 10 -#define reg_iop_sw_spu_rw_mpu_intr___intr10___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr10___bit 10 -#define reg_iop_sw_spu_rw_mpu_intr___intr11___lsb 11 -#define reg_iop_sw_spu_rw_mpu_intr___intr11___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr11___bit 11 -#define reg_iop_sw_spu_rw_mpu_intr___intr12___lsb 12 -#define reg_iop_sw_spu_rw_mpu_intr___intr12___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr12___bit 12 -#define reg_iop_sw_spu_rw_mpu_intr___intr13___lsb 13 -#define reg_iop_sw_spu_rw_mpu_intr___intr13___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr13___bit 13 -#define reg_iop_sw_spu_rw_mpu_intr___intr14___lsb 14 -#define reg_iop_sw_spu_rw_mpu_intr___intr14___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr14___bit 14 -#define reg_iop_sw_spu_rw_mpu_intr___intr15___lsb 15 -#define reg_iop_sw_spu_rw_mpu_intr___intr15___width 1 -#define reg_iop_sw_spu_rw_mpu_intr___intr15___bit 15 -#define reg_iop_sw_spu_rw_mpu_intr_offset 128 - -/* Register r_mpu_intr, scope iop_sw_spu, type r */ -#define reg_iop_sw_spu_r_mpu_intr___intr0___lsb 0 -#define reg_iop_sw_spu_r_mpu_intr___intr0___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr0___bit 0 -#define reg_iop_sw_spu_r_mpu_intr___intr1___lsb 1 -#define reg_iop_sw_spu_r_mpu_intr___intr1___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr1___bit 1 -#define reg_iop_sw_spu_r_mpu_intr___intr2___lsb 2 -#define reg_iop_sw_spu_r_mpu_intr___intr2___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr2___bit 2 -#define reg_iop_sw_spu_r_mpu_intr___intr3___lsb 3 -#define reg_iop_sw_spu_r_mpu_intr___intr3___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr3___bit 3 -#define reg_iop_sw_spu_r_mpu_intr___intr4___lsb 4 -#define reg_iop_sw_spu_r_mpu_intr___intr4___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr4___bit 4 -#define reg_iop_sw_spu_r_mpu_intr___intr5___lsb 5 -#define reg_iop_sw_spu_r_mpu_intr___intr5___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr5___bit 5 -#define reg_iop_sw_spu_r_mpu_intr___intr6___lsb 6 -#define reg_iop_sw_spu_r_mpu_intr___intr6___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr6___bit 6 -#define reg_iop_sw_spu_r_mpu_intr___intr7___lsb 7 -#define reg_iop_sw_spu_r_mpu_intr___intr7___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr7___bit 7 -#define reg_iop_sw_spu_r_mpu_intr___intr8___lsb 8 -#define reg_iop_sw_spu_r_mpu_intr___intr8___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr8___bit 8 -#define reg_iop_sw_spu_r_mpu_intr___intr9___lsb 9 -#define reg_iop_sw_spu_r_mpu_intr___intr9___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr9___bit 9 -#define reg_iop_sw_spu_r_mpu_intr___intr10___lsb 10 -#define reg_iop_sw_spu_r_mpu_intr___intr10___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr10___bit 10 -#define reg_iop_sw_spu_r_mpu_intr___intr11___lsb 11 -#define reg_iop_sw_spu_r_mpu_intr___intr11___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr11___bit 11 -#define reg_iop_sw_spu_r_mpu_intr___intr12___lsb 12 -#define reg_iop_sw_spu_r_mpu_intr___intr12___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr12___bit 12 -#define reg_iop_sw_spu_r_mpu_intr___intr13___lsb 13 -#define reg_iop_sw_spu_r_mpu_intr___intr13___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr13___bit 13 -#define reg_iop_sw_spu_r_mpu_intr___intr14___lsb 14 -#define reg_iop_sw_spu_r_mpu_intr___intr14___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr14___bit 14 -#define reg_iop_sw_spu_r_mpu_intr___intr15___lsb 15 -#define reg_iop_sw_spu_r_mpu_intr___intr15___width 1 -#define reg_iop_sw_spu_r_mpu_intr___intr15___bit 15 -#define reg_iop_sw_spu_r_mpu_intr_offset 132 - - -/* Constants */ -#define regk_iop_sw_spu_copy 0x00000000 -#define regk_iop_sw_spu_no 0x00000000 -#define regk_iop_sw_spu_nop 0x00000000 -#define regk_iop_sw_spu_rd 0x00000002 -#define regk_iop_sw_spu_reg_copy 0x00000001 -#define regk_iop_sw_spu_rw_bus_clr_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_bus_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_bus_oe_set_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_bus_set_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_gio_clr_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_gio_oe_clr_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_gio_oe_set_mask_default 0x00000000 -#define regk_iop_sw_spu_rw_gio_set_mask_default 0x00000000 -#define regk_iop_sw_spu_set 0x00000001 -#define regk_iop_sw_spu_wr 0x00000003 -#define regk_iop_sw_spu_yes 0x00000001 -#endif /* __iop_sw_spu_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_version_defs_asm.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_version_defs_asm.h deleted file mode 100644 index 4ad671202af0..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/asm/iop_version_defs_asm.h +++ /dev/null @@ -1,61 +0,0 @@ -#ifndef __iop_version_defs_asm_h -#define __iop_version_defs_asm_h - -/* - * This file is autogenerated from - * file: iop_version.r - * - * by ../../../tools/rdesc/bin/rdes2c -asm -outfile iop_version_defs_asm.h iop_version.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register r_version, scope iop_version, type r */ -#define reg_iop_version_r_version___nr___lsb 0 -#define reg_iop_version_r_version___nr___width 8 -#define reg_iop_version_r_version_offset 0 - - -/* Constants */ -#define regk_iop_version_v2_0 0x00000002 -#endif /* __iop_version_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_reg_space.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_reg_space.h deleted file mode 100644 index af3196c60a46..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_reg_space.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Autogenerated Changes here will be lost! - * generated by ./gen_sw.pl Wed Feb 14 09:27:48 2007 iop_sw.cfg - */ -#define regi_iop_version (regi_iop + 0) -#define regi_iop_fifo_in_extra (regi_iop + 64) -#define regi_iop_fifo_out_extra (regi_iop + 128) -#define regi_iop_trigger_grp0 (regi_iop + 192) -#define regi_iop_trigger_grp1 (regi_iop + 256) -#define regi_iop_trigger_grp2 (regi_iop + 320) -#define regi_iop_trigger_grp3 (regi_iop + 384) -#define regi_iop_trigger_grp4 (regi_iop + 448) -#define regi_iop_trigger_grp5 (regi_iop + 512) -#define regi_iop_trigger_grp6 (regi_iop + 576) -#define regi_iop_trigger_grp7 (regi_iop + 640) -#define regi_iop_crc_par (regi_iop + 768) -#define regi_iop_dmc_in (regi_iop + 896) -#define regi_iop_dmc_out (regi_iop + 1024) -#define regi_iop_fifo_in (regi_iop + 1152) -#define regi_iop_fifo_out (regi_iop + 1280) -#define regi_iop_scrc_in (regi_iop + 1408) -#define regi_iop_scrc_out (regi_iop + 1536) -#define regi_iop_timer_grp0 (regi_iop + 1664) -#define regi_iop_timer_grp1 (regi_iop + 1792) -#define regi_iop_sap_in (regi_iop + 2048) -#define regi_iop_sap_out (regi_iop + 2304) -#define regi_iop_spu (regi_iop + 2560) -#define regi_iop_sw_cfg (regi_iop + 2816) -#define regi_iop_sw_cpu (regi_iop + 3072) -#define regi_iop_sw_mpu (regi_iop + 3328) -#define regi_iop_sw_spu (regi_iop + 3584) -#define regi_iop_mpu (regi_iop + 4096) diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_in_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_in_defs.h deleted file mode 100644 index 51dde016c03a..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_in_defs.h +++ /dev/null @@ -1,141 +0,0 @@ -#ifndef __iop_sap_in_defs_h -#define __iop_sap_in_defs_h - -/* - * This file is autogenerated from - * file: iop_sap_in.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sap_in_defs.h iop_sap_in.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sap_in */ - -#define STRIDE_iop_sap_in_rw_bus_byte 4 -/* Register rw_bus_byte, scope iop_sap_in, type rw */ -typedef struct { - unsigned int sync_sel : 2; - unsigned int sync_ext_src : 3; - unsigned int sync_edge : 2; - unsigned int delay : 2; - unsigned int dummy1 : 23; -} reg_iop_sap_in_rw_bus_byte; -#define REG_RD_ADDR_iop_sap_in_rw_bus_byte 0 -#define REG_WR_ADDR_iop_sap_in_rw_bus_byte 0 - -#define STRIDE_iop_sap_in_rw_gio 4 -/* Register rw_gio, scope iop_sap_in, type rw */ -typedef struct { - unsigned int sync_sel : 2; - unsigned int sync_ext_src : 3; - unsigned int sync_edge : 2; - unsigned int delay : 2; - unsigned int logic : 2; - unsigned int dummy1 : 21; -} reg_iop_sap_in_rw_gio; -#define REG_RD_ADDR_iop_sap_in_rw_gio 16 -#define REG_WR_ADDR_iop_sap_in_rw_gio 16 - - -/* Constants */ -enum { - regk_iop_sap_in_and = 0x00000002, - regk_iop_sap_in_ext_clk200 = 0x00000003, - regk_iop_sap_in_gio0 = 0x00000000, - regk_iop_sap_in_gio12 = 0x00000003, - regk_iop_sap_in_gio16 = 0x00000004, - regk_iop_sap_in_gio20 = 0x00000005, - regk_iop_sap_in_gio24 = 0x00000006, - regk_iop_sap_in_gio28 = 0x00000007, - regk_iop_sap_in_gio4 = 0x00000001, - regk_iop_sap_in_gio8 = 0x00000002, - regk_iop_sap_in_inv = 0x00000001, - regk_iop_sap_in_neg = 0x00000002, - regk_iop_sap_in_no = 0x00000000, - regk_iop_sap_in_no_del_ext_clk200 = 0x00000002, - regk_iop_sap_in_none = 0x00000000, - regk_iop_sap_in_one = 0x00000001, - regk_iop_sap_in_or = 0x00000003, - regk_iop_sap_in_pos = 0x00000001, - regk_iop_sap_in_pos_neg = 0x00000003, - regk_iop_sap_in_rw_bus_byte_default = 0x00000000, - regk_iop_sap_in_rw_bus_byte_size = 0x00000004, - regk_iop_sap_in_rw_gio_default = 0x00000000, - regk_iop_sap_in_rw_gio_size = 0x00000020, - regk_iop_sap_in_timer_grp0_tmr3 = 0x00000000, - regk_iop_sap_in_timer_grp1_tmr3 = 0x00000001, - regk_iop_sap_in_tmr_clk200 = 0x00000001, - regk_iop_sap_in_two = 0x00000002, - regk_iop_sap_in_two_clk200 = 0x00000000 -}; -#endif /* __iop_sap_in_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_out_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_out_defs.h deleted file mode 100644 index 5af88baa2ac1..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sap_out_defs.h +++ /dev/null @@ -1,231 +0,0 @@ -#ifndef __iop_sap_out_defs_h -#define __iop_sap_out_defs_h - -/* - * This file is autogenerated from - * file: iop_sap_out.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sap_out_defs.h iop_sap_out.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sap_out */ - -/* Register rw_gen_gated, scope iop_sap_out, type rw */ -typedef struct { - unsigned int clk0_src : 2; - unsigned int clk0_gate_src : 2; - unsigned int clk0_force_src : 3; - unsigned int clk1_src : 2; - unsigned int clk1_gate_src : 2; - unsigned int clk1_force_src : 3; - unsigned int dummy1 : 18; -} reg_iop_sap_out_rw_gen_gated; -#define REG_RD_ADDR_iop_sap_out_rw_gen_gated 0 -#define REG_WR_ADDR_iop_sap_out_rw_gen_gated 0 - -/* Register rw_bus, scope iop_sap_out, type rw */ -typedef struct { - unsigned int byte0_clk_sel : 2; - unsigned int byte0_clk_ext : 2; - unsigned int byte0_gated_clk : 1; - unsigned int byte0_clk_inv : 1; - unsigned int byte0_delay : 1; - unsigned int byte1_clk_sel : 2; - unsigned int byte1_clk_ext : 2; - unsigned int byte1_gated_clk : 1; - unsigned int byte1_clk_inv : 1; - unsigned int byte1_delay : 1; - unsigned int byte2_clk_sel : 2; - unsigned int byte2_clk_ext : 2; - unsigned int byte2_gated_clk : 1; - unsigned int byte2_clk_inv : 1; - unsigned int byte2_delay : 1; - unsigned int byte3_clk_sel : 2; - unsigned int byte3_clk_ext : 2; - unsigned int byte3_gated_clk : 1; - unsigned int byte3_clk_inv : 1; - unsigned int byte3_delay : 1; - unsigned int dummy1 : 4; -} reg_iop_sap_out_rw_bus; -#define REG_RD_ADDR_iop_sap_out_rw_bus 4 -#define REG_WR_ADDR_iop_sap_out_rw_bus 4 - -/* Register rw_bus_lo_oe, scope iop_sap_out, type rw */ -typedef struct { - unsigned int byte0_clk_sel : 2; - unsigned int byte0_clk_ext : 2; - unsigned int byte0_gated_clk : 1; - unsigned int byte0_clk_inv : 1; - unsigned int byte0_delay : 1; - unsigned int byte0_logic : 2; - unsigned int byte0_logic_src : 2; - unsigned int byte1_clk_sel : 2; - unsigned int byte1_clk_ext : 2; - unsigned int byte1_gated_clk : 1; - unsigned int byte1_clk_inv : 1; - unsigned int byte1_delay : 1; - unsigned int byte1_logic : 2; - unsigned int byte1_logic_src : 2; - unsigned int dummy1 : 10; -} reg_iop_sap_out_rw_bus_lo_oe; -#define REG_RD_ADDR_iop_sap_out_rw_bus_lo_oe 8 -#define REG_WR_ADDR_iop_sap_out_rw_bus_lo_oe 8 - -/* Register rw_bus_hi_oe, scope iop_sap_out, type rw */ -typedef struct { - unsigned int byte2_clk_sel : 2; - unsigned int byte2_clk_ext : 2; - unsigned int byte2_gated_clk : 1; - unsigned int byte2_clk_inv : 1; - unsigned int byte2_delay : 1; - unsigned int byte2_logic : 2; - unsigned int byte2_logic_src : 2; - unsigned int byte3_clk_sel : 2; - unsigned int byte3_clk_ext : 2; - unsigned int byte3_gated_clk : 1; - unsigned int byte3_clk_inv : 1; - unsigned int byte3_delay : 1; - unsigned int byte3_logic : 2; - unsigned int byte3_logic_src : 2; - unsigned int dummy1 : 10; -} reg_iop_sap_out_rw_bus_hi_oe; -#define REG_RD_ADDR_iop_sap_out_rw_bus_hi_oe 12 -#define REG_WR_ADDR_iop_sap_out_rw_bus_hi_oe 12 - -#define STRIDE_iop_sap_out_rw_gio 4 -/* Register rw_gio, scope iop_sap_out, type rw */ -typedef struct { - unsigned int out_clk_sel : 3; - unsigned int out_clk_ext : 2; - unsigned int out_gated_clk : 1; - unsigned int out_clk_inv : 1; - unsigned int out_delay : 1; - unsigned int out_logic : 2; - unsigned int out_logic_src : 2; - unsigned int oe_clk_sel : 3; - unsigned int oe_clk_ext : 2; - unsigned int oe_gated_clk : 1; - unsigned int oe_clk_inv : 1; - unsigned int oe_delay : 1; - unsigned int oe_logic : 2; - unsigned int oe_logic_src : 2; - unsigned int dummy1 : 8; -} reg_iop_sap_out_rw_gio; -#define REG_RD_ADDR_iop_sap_out_rw_gio 16 -#define REG_WR_ADDR_iop_sap_out_rw_gio 16 - - -/* Constants */ -enum { - regk_iop_sap_out_always = 0x00000001, - regk_iop_sap_out_and = 0x00000002, - regk_iop_sap_out_clk0 = 0x00000000, - regk_iop_sap_out_clk1 = 0x00000001, - regk_iop_sap_out_clk12 = 0x00000004, - regk_iop_sap_out_clk200 = 0x00000000, - regk_iop_sap_out_ext = 0x00000002, - regk_iop_sap_out_gated = 0x00000003, - regk_iop_sap_out_gio0 = 0x00000000, - regk_iop_sap_out_gio1 = 0x00000000, - regk_iop_sap_out_gio16 = 0x00000002, - regk_iop_sap_out_gio17 = 0x00000002, - regk_iop_sap_out_gio24 = 0x00000003, - regk_iop_sap_out_gio25 = 0x00000003, - regk_iop_sap_out_gio8 = 0x00000001, - regk_iop_sap_out_gio9 = 0x00000001, - regk_iop_sap_out_gio_out10 = 0x00000005, - regk_iop_sap_out_gio_out18 = 0x00000006, - regk_iop_sap_out_gio_out2 = 0x00000004, - regk_iop_sap_out_gio_out26 = 0x00000007, - regk_iop_sap_out_inv = 0x00000001, - regk_iop_sap_out_nand = 0x00000003, - regk_iop_sap_out_no = 0x00000000, - regk_iop_sap_out_none = 0x00000000, - regk_iop_sap_out_one = 0x00000001, - regk_iop_sap_out_rw_bus_default = 0x00000000, - regk_iop_sap_out_rw_bus_hi_oe_default = 0x00000000, - regk_iop_sap_out_rw_bus_lo_oe_default = 0x00000000, - regk_iop_sap_out_rw_gen_gated_default = 0x00000000, - regk_iop_sap_out_rw_gio_default = 0x00000000, - regk_iop_sap_out_rw_gio_size = 0x00000020, - regk_iop_sap_out_spu_gio6 = 0x00000002, - regk_iop_sap_out_spu_gio7 = 0x00000003, - regk_iop_sap_out_timer_grp0_tmr2 = 0x00000000, - regk_iop_sap_out_timer_grp0_tmr3 = 0x00000001, - regk_iop_sap_out_timer_grp1_tmr2 = 0x00000002, - regk_iop_sap_out_timer_grp1_tmr3 = 0x00000003, - regk_iop_sap_out_tmr200 = 0x00000001, - regk_iop_sap_out_yes = 0x00000001 -}; -#endif /* __iop_sap_out_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cfg_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cfg_defs.h deleted file mode 100644 index 98ac95275a1c..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cfg_defs.h +++ /dev/null @@ -1,725 +0,0 @@ -#ifndef __iop_sw_cfg_defs_h -#define __iop_sw_cfg_defs_h - -/* - * This file is autogenerated from - * file: iop_sw_cfg.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_cfg_defs.h iop_sw_cfg.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sw_cfg */ - -/* Register rw_crc_par_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_crc_par_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_crc_par_owner 0 -#define REG_WR_ADDR_iop_sw_cfg_rw_crc_par_owner 0 - -/* Register rw_dmc_in_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_dmc_in_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_in_owner 4 -#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_in_owner 4 - -/* Register rw_dmc_out_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_dmc_out_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_dmc_out_owner 8 -#define REG_WR_ADDR_iop_sw_cfg_rw_dmc_out_owner 8 - -/* Register rw_fifo_in_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_in_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in_owner 12 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in_owner 12 - -/* Register rw_fifo_in_extra_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_in_extra_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_in_extra_owner 16 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_in_extra_owner 16 - -/* Register rw_fifo_out_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_out_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out_owner 20 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out_owner 20 - -/* Register rw_fifo_out_extra_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_fifo_out_extra_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_fifo_out_extra_owner 24 -#define REG_WR_ADDR_iop_sw_cfg_rw_fifo_out_extra_owner 24 - -/* Register rw_sap_in_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_sap_in_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_sap_in_owner 28 -#define REG_WR_ADDR_iop_sw_cfg_rw_sap_in_owner 28 - -/* Register rw_sap_out_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_sap_out_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_sap_out_owner 32 -#define REG_WR_ADDR_iop_sw_cfg_rw_sap_out_owner 32 - -/* Register rw_scrc_in_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_scrc_in_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_in_owner 36 -#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_in_owner 36 - -/* Register rw_scrc_out_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_scrc_out_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_scrc_out_owner 40 -#define REG_WR_ADDR_iop_sw_cfg_rw_scrc_out_owner 40 - -/* Register rw_spu_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 1; - unsigned int dummy1 : 31; -} reg_iop_sw_cfg_rw_spu_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_spu_owner 44 -#define REG_WR_ADDR_iop_sw_cfg_rw_spu_owner 44 - -/* Register rw_timer_grp0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_timer_grp0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp0_owner 48 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp0_owner 48 - -/* Register rw_timer_grp1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_timer_grp1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp1_owner 52 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp1_owner 52 - -/* Register rw_trigger_grp0_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp0_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp0_owner 56 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp0_owner 56 - -/* Register rw_trigger_grp1_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp1_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp1_owner 60 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp1_owner 60 - -/* Register rw_trigger_grp2_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp2_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp2_owner 64 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp2_owner 64 - -/* Register rw_trigger_grp3_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp3_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp3_owner 68 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp3_owner 68 - -/* Register rw_trigger_grp4_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp4_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp4_owner 72 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp4_owner 72 - -/* Register rw_trigger_grp5_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp5_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp5_owner 76 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp5_owner 76 - -/* Register rw_trigger_grp6_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp6_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp6_owner 80 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp6_owner 80 - -/* Register rw_trigger_grp7_owner, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_trigger_grp7_owner; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grp7_owner 84 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grp7_owner 84 - -/* Register rw_bus_mask, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_cfg_rw_bus_mask; -#define REG_RD_ADDR_iop_sw_cfg_rw_bus_mask 88 -#define REG_WR_ADDR_iop_sw_cfg_rw_bus_mask 88 - -/* Register rw_bus_oe_mask, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_cfg_rw_bus_oe_mask; -#define REG_RD_ADDR_iop_sw_cfg_rw_bus_oe_mask 92 -#define REG_WR_ADDR_iop_sw_cfg_rw_bus_oe_mask 92 - -/* Register rw_gio_mask, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cfg_rw_gio_mask; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_mask 96 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_mask 96 - -/* Register rw_gio_oe_mask, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cfg_rw_gio_oe_mask; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_oe_mask 100 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_oe_mask 100 - -/* Register rw_pinmapping, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int bus_byte0 : 2; - unsigned int bus_byte1 : 2; - unsigned int bus_byte2 : 2; - unsigned int bus_byte3 : 2; - unsigned int gio3_0 : 2; - unsigned int gio7_4 : 2; - unsigned int gio11_8 : 2; - unsigned int gio15_12 : 2; - unsigned int gio19_16 : 2; - unsigned int gio23_20 : 2; - unsigned int gio27_24 : 2; - unsigned int gio31_28 : 2; - unsigned int dummy1 : 8; -} reg_iop_sw_cfg_rw_pinmapping; -#define REG_RD_ADDR_iop_sw_cfg_rw_pinmapping 104 -#define REG_WR_ADDR_iop_sw_cfg_rw_pinmapping 104 - -/* Register rw_bus_out_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int bus_lo : 2; - unsigned int bus_hi : 2; - unsigned int bus_lo_oe : 2; - unsigned int bus_hi_oe : 2; - unsigned int dummy1 : 24; -} reg_iop_sw_cfg_rw_bus_out_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_bus_out_cfg 108 -#define REG_WR_ADDR_iop_sw_cfg_rw_bus_out_cfg 108 - -/* Register rw_gio_out_grp0_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio0 : 3; - unsigned int gio0_oe : 1; - unsigned int gio1 : 3; - unsigned int gio1_oe : 1; - unsigned int gio2 : 3; - unsigned int gio2_oe : 1; - unsigned int gio3 : 3; - unsigned int gio3_oe : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cfg_rw_gio_out_grp0_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp0_cfg 112 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp0_cfg 112 - -/* Register rw_gio_out_grp1_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio4 : 3; - unsigned int gio4_oe : 1; - unsigned int gio5 : 3; - unsigned int gio5_oe : 1; - unsigned int gio6 : 3; - unsigned int gio6_oe : 1; - unsigned int gio7 : 3; - unsigned int gio7_oe : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cfg_rw_gio_out_grp1_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp1_cfg 116 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp1_cfg 116 - -/* Register rw_gio_out_grp2_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio8 : 3; - unsigned int gio8_oe : 1; - unsigned int gio9 : 3; - unsigned int gio9_oe : 1; - unsigned int gio10 : 3; - unsigned int gio10_oe : 1; - unsigned int gio11 : 3; - unsigned int gio11_oe : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cfg_rw_gio_out_grp2_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp2_cfg 120 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp2_cfg 120 - -/* Register rw_gio_out_grp3_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio12 : 3; - unsigned int gio12_oe : 1; - unsigned int gio13 : 3; - unsigned int gio13_oe : 1; - unsigned int gio14 : 3; - unsigned int gio14_oe : 1; - unsigned int gio15 : 3; - unsigned int gio15_oe : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cfg_rw_gio_out_grp3_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp3_cfg 124 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp3_cfg 124 - -/* Register rw_gio_out_grp4_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio16 : 3; - unsigned int gio16_oe : 1; - unsigned int gio17 : 3; - unsigned int gio17_oe : 1; - unsigned int gio18 : 3; - unsigned int gio18_oe : 1; - unsigned int gio19 : 3; - unsigned int gio19_oe : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cfg_rw_gio_out_grp4_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp4_cfg 128 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp4_cfg 128 - -/* Register rw_gio_out_grp5_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio20 : 3; - unsigned int gio20_oe : 1; - unsigned int gio21 : 3; - unsigned int gio21_oe : 1; - unsigned int gio22 : 3; - unsigned int gio22_oe : 1; - unsigned int gio23 : 3; - unsigned int gio23_oe : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cfg_rw_gio_out_grp5_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp5_cfg 132 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp5_cfg 132 - -/* Register rw_gio_out_grp6_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio24 : 3; - unsigned int gio24_oe : 1; - unsigned int gio25 : 3; - unsigned int gio25_oe : 1; - unsigned int gio26 : 3; - unsigned int gio26_oe : 1; - unsigned int gio27 : 3; - unsigned int gio27_oe : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cfg_rw_gio_out_grp6_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp6_cfg 136 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp6_cfg 136 - -/* Register rw_gio_out_grp7_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int gio28 : 3; - unsigned int gio28_oe : 1; - unsigned int gio29 : 3; - unsigned int gio29_oe : 1; - unsigned int gio30 : 3; - unsigned int gio30_oe : 1; - unsigned int gio31 : 3; - unsigned int gio31_oe : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cfg_rw_gio_out_grp7_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_gio_out_grp7_cfg 140 -#define REG_WR_ADDR_iop_sw_cfg_rw_gio_out_grp7_cfg 140 - -/* Register rw_spu_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int bus0_in : 1; - unsigned int bus1_in : 1; - unsigned int dummy1 : 30; -} reg_iop_sw_cfg_rw_spu_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_spu_cfg 144 -#define REG_WR_ADDR_iop_sw_cfg_rw_spu_cfg 144 - -/* Register rw_timer_grp0_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int ext_clk : 3; - unsigned int tmr0_en : 2; - unsigned int tmr1_en : 2; - unsigned int tmr2_en : 2; - unsigned int tmr3_en : 2; - unsigned int tmr0_dis : 2; - unsigned int tmr1_dis : 2; - unsigned int tmr2_dis : 2; - unsigned int tmr3_dis : 2; - unsigned int dummy1 : 13; -} reg_iop_sw_cfg_rw_timer_grp0_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp0_cfg 148 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp0_cfg 148 - -/* Register rw_timer_grp1_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int ext_clk : 3; - unsigned int tmr0_en : 2; - unsigned int tmr1_en : 2; - unsigned int tmr2_en : 2; - unsigned int tmr3_en : 2; - unsigned int tmr0_dis : 2; - unsigned int tmr1_dis : 2; - unsigned int tmr2_dis : 2; - unsigned int tmr3_dis : 2; - unsigned int dummy1 : 13; -} reg_iop_sw_cfg_rw_timer_grp1_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_timer_grp1_cfg 152 -#define REG_WR_ADDR_iop_sw_cfg_rw_timer_grp1_cfg 152 - -/* Register rw_trigger_grps_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int grp0_dis : 1; - unsigned int grp0_en : 1; - unsigned int grp1_dis : 1; - unsigned int grp1_en : 1; - unsigned int grp2_dis : 1; - unsigned int grp2_en : 1; - unsigned int grp3_dis : 1; - unsigned int grp3_en : 1; - unsigned int grp4_dis : 1; - unsigned int grp4_en : 1; - unsigned int grp5_dis : 1; - unsigned int grp5_en : 1; - unsigned int grp6_dis : 1; - unsigned int grp6_en : 1; - unsigned int grp7_dis : 1; - unsigned int grp7_en : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cfg_rw_trigger_grps_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_trigger_grps_cfg 156 -#define REG_WR_ADDR_iop_sw_cfg_rw_trigger_grps_cfg 156 - -/* Register rw_pdp_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int out_strb : 4; - unsigned int in_src : 2; - unsigned int in_size : 3; - unsigned int in_last : 2; - unsigned int in_strb : 4; - unsigned int dummy1 : 17; -} reg_iop_sw_cfg_rw_pdp_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_pdp_cfg 160 -#define REG_WR_ADDR_iop_sw_cfg_rw_pdp_cfg 160 - -/* Register rw_sdp_cfg, scope iop_sw_cfg, type rw */ -typedef struct { - unsigned int sdp_out_strb : 3; - unsigned int sdp_in_data : 3; - unsigned int sdp_in_last : 2; - unsigned int sdp_in_strb : 3; - unsigned int dummy1 : 21; -} reg_iop_sw_cfg_rw_sdp_cfg; -#define REG_RD_ADDR_iop_sw_cfg_rw_sdp_cfg 164 -#define REG_WR_ADDR_iop_sw_cfg_rw_sdp_cfg 164 - - -/* Constants */ -enum { - regk_iop_sw_cfg_a = 0x00000001, - regk_iop_sw_cfg_b = 0x00000002, - regk_iop_sw_cfg_bus = 0x00000000, - regk_iop_sw_cfg_bus_rot16 = 0x00000002, - regk_iop_sw_cfg_bus_rot24 = 0x00000003, - regk_iop_sw_cfg_bus_rot8 = 0x00000001, - regk_iop_sw_cfg_clk12 = 0x00000000, - regk_iop_sw_cfg_cpu = 0x00000000, - regk_iop_sw_cfg_gated_clk0 = 0x0000000e, - regk_iop_sw_cfg_gated_clk1 = 0x0000000f, - regk_iop_sw_cfg_gio0 = 0x00000004, - regk_iop_sw_cfg_gio1 = 0x00000001, - regk_iop_sw_cfg_gio2 = 0x00000005, - regk_iop_sw_cfg_gio3 = 0x00000002, - regk_iop_sw_cfg_gio4 = 0x00000006, - regk_iop_sw_cfg_gio5 = 0x00000003, - regk_iop_sw_cfg_gio6 = 0x00000007, - regk_iop_sw_cfg_gio7 = 0x00000004, - regk_iop_sw_cfg_gio_in18 = 0x00000002, - regk_iop_sw_cfg_gio_in19 = 0x00000003, - regk_iop_sw_cfg_gio_in20 = 0x00000004, - regk_iop_sw_cfg_gio_in21 = 0x00000005, - regk_iop_sw_cfg_gio_in26 = 0x00000006, - regk_iop_sw_cfg_gio_in27 = 0x00000007, - regk_iop_sw_cfg_gio_in4 = 0x00000000, - regk_iop_sw_cfg_gio_in5 = 0x00000001, - regk_iop_sw_cfg_last_timer_grp0_tmr2 = 0x00000001, - regk_iop_sw_cfg_last_timer_grp1_tmr2 = 0x00000002, - regk_iop_sw_cfg_last_timer_grp1_tmr3 = 0x00000003, - regk_iop_sw_cfg_mpu = 0x00000001, - regk_iop_sw_cfg_none = 0x00000000, - regk_iop_sw_cfg_pdp_out = 0x00000001, - regk_iop_sw_cfg_pdp_out_hi = 0x00000001, - regk_iop_sw_cfg_pdp_out_lo = 0x00000000, - regk_iop_sw_cfg_rw_bus_mask_default = 0x00000000, - regk_iop_sw_cfg_rw_bus_oe_mask_default = 0x00000000, - regk_iop_sw_cfg_rw_bus_out_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_crc_par_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_dmc_in_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_dmc_out_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_in_extra_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_in_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_out_extra_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_fifo_out_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_mask_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_oe_mask_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp0_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp1_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp2_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp3_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp4_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp5_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp6_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_gio_out_grp7_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_pdp_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_pinmapping_default = 0x00555555, - regk_iop_sw_cfg_rw_sap_in_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_sap_out_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_scrc_in_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_scrc_out_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_sdp_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_spu_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_spu_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp0_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp1_cfg_default = 0x00000000, - regk_iop_sw_cfg_rw_timer_grp1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp0_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp1_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp2_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp3_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp4_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp5_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp6_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grp7_owner_default = 0x00000000, - regk_iop_sw_cfg_rw_trigger_grps_cfg_default = 0x00000000, - regk_iop_sw_cfg_sdp_out = 0x00000004, - regk_iop_sw_cfg_size16 = 0x00000002, - regk_iop_sw_cfg_size24 = 0x00000003, - regk_iop_sw_cfg_size32 = 0x00000004, - regk_iop_sw_cfg_size8 = 0x00000001, - regk_iop_sw_cfg_spu = 0x00000002, - regk_iop_sw_cfg_spu_bus_out0_hi = 0x00000002, - regk_iop_sw_cfg_spu_bus_out0_lo = 0x00000002, - regk_iop_sw_cfg_spu_bus_out1_hi = 0x00000003, - regk_iop_sw_cfg_spu_bus_out1_lo = 0x00000003, - regk_iop_sw_cfg_spu_g0 = 0x00000007, - regk_iop_sw_cfg_spu_g1 = 0x00000007, - regk_iop_sw_cfg_spu_g2 = 0x00000007, - regk_iop_sw_cfg_spu_g3 = 0x00000007, - regk_iop_sw_cfg_spu_g4 = 0x00000007, - regk_iop_sw_cfg_spu_g5 = 0x00000007, - regk_iop_sw_cfg_spu_g6 = 0x00000007, - regk_iop_sw_cfg_spu_g7 = 0x00000007, - regk_iop_sw_cfg_spu_gio0 = 0x00000000, - regk_iop_sw_cfg_spu_gio1 = 0x00000001, - regk_iop_sw_cfg_spu_gio5 = 0x00000005, - regk_iop_sw_cfg_spu_gio6 = 0x00000006, - regk_iop_sw_cfg_spu_gio7 = 0x00000007, - regk_iop_sw_cfg_spu_gio_out0 = 0x00000008, - regk_iop_sw_cfg_spu_gio_out1 = 0x00000009, - regk_iop_sw_cfg_spu_gio_out2 = 0x0000000a, - regk_iop_sw_cfg_spu_gio_out3 = 0x0000000b, - regk_iop_sw_cfg_spu_gio_out4 = 0x0000000c, - regk_iop_sw_cfg_spu_gio_out5 = 0x0000000d, - regk_iop_sw_cfg_spu_gio_out6 = 0x0000000e, - regk_iop_sw_cfg_spu_gio_out7 = 0x0000000f, - regk_iop_sw_cfg_spu_gioout0 = 0x00000000, - regk_iop_sw_cfg_spu_gioout1 = 0x00000000, - regk_iop_sw_cfg_spu_gioout10 = 0x00000007, - regk_iop_sw_cfg_spu_gioout11 = 0x00000007, - regk_iop_sw_cfg_spu_gioout12 = 0x00000007, - regk_iop_sw_cfg_spu_gioout13 = 0x00000007, - regk_iop_sw_cfg_spu_gioout14 = 0x00000007, - regk_iop_sw_cfg_spu_gioout15 = 0x00000007, - regk_iop_sw_cfg_spu_gioout16 = 0x00000007, - regk_iop_sw_cfg_spu_gioout17 = 0x00000007, - regk_iop_sw_cfg_spu_gioout18 = 0x00000007, - regk_iop_sw_cfg_spu_gioout19 = 0x00000007, - regk_iop_sw_cfg_spu_gioout2 = 0x00000001, - regk_iop_sw_cfg_spu_gioout20 = 0x00000007, - regk_iop_sw_cfg_spu_gioout21 = 0x00000007, - regk_iop_sw_cfg_spu_gioout22 = 0x00000007, - regk_iop_sw_cfg_spu_gioout23 = 0x00000007, - regk_iop_sw_cfg_spu_gioout24 = 0x00000007, - regk_iop_sw_cfg_spu_gioout25 = 0x00000007, - regk_iop_sw_cfg_spu_gioout26 = 0x00000007, - regk_iop_sw_cfg_spu_gioout27 = 0x00000007, - regk_iop_sw_cfg_spu_gioout28 = 0x00000007, - regk_iop_sw_cfg_spu_gioout29 = 0x00000007, - regk_iop_sw_cfg_spu_gioout3 = 0x00000001, - regk_iop_sw_cfg_spu_gioout30 = 0x00000007, - regk_iop_sw_cfg_spu_gioout31 = 0x00000007, - regk_iop_sw_cfg_spu_gioout4 = 0x00000002, - regk_iop_sw_cfg_spu_gioout5 = 0x00000002, - regk_iop_sw_cfg_spu_gioout6 = 0x00000003, - regk_iop_sw_cfg_spu_gioout7 = 0x00000003, - regk_iop_sw_cfg_spu_gioout8 = 0x00000007, - regk_iop_sw_cfg_spu_gioout9 = 0x00000007, - regk_iop_sw_cfg_strb_timer_grp0_tmr0 = 0x00000001, - regk_iop_sw_cfg_strb_timer_grp0_tmr1 = 0x00000002, - regk_iop_sw_cfg_strb_timer_grp1_tmr0 = 0x00000003, - regk_iop_sw_cfg_strb_timer_grp1_tmr1 = 0x00000002, - regk_iop_sw_cfg_timer_grp0 = 0x00000000, - regk_iop_sw_cfg_timer_grp0_rot = 0x00000001, - regk_iop_sw_cfg_timer_grp0_strb0 = 0x00000005, - regk_iop_sw_cfg_timer_grp0_strb1 = 0x00000005, - regk_iop_sw_cfg_timer_grp0_strb2 = 0x00000005, - regk_iop_sw_cfg_timer_grp0_strb3 = 0x00000005, - regk_iop_sw_cfg_timer_grp0_tmr0 = 0x00000002, - regk_iop_sw_cfg_timer_grp1 = 0x00000000, - regk_iop_sw_cfg_timer_grp1_rot = 0x00000001, - regk_iop_sw_cfg_timer_grp1_strb0 = 0x00000006, - regk_iop_sw_cfg_timer_grp1_strb1 = 0x00000006, - regk_iop_sw_cfg_timer_grp1_strb2 = 0x00000006, - regk_iop_sw_cfg_timer_grp1_strb3 = 0x00000006, - regk_iop_sw_cfg_timer_grp1_tmr0 = 0x00000003, - regk_iop_sw_cfg_trig0_0 = 0x00000000, - regk_iop_sw_cfg_trig0_1 = 0x00000000, - regk_iop_sw_cfg_trig0_2 = 0x00000000, - regk_iop_sw_cfg_trig0_3 = 0x00000000, - regk_iop_sw_cfg_trig1_0 = 0x00000000, - regk_iop_sw_cfg_trig1_1 = 0x00000000, - regk_iop_sw_cfg_trig1_2 = 0x00000000, - regk_iop_sw_cfg_trig1_3 = 0x00000000, - regk_iop_sw_cfg_trig2_0 = 0x00000001, - regk_iop_sw_cfg_trig2_1 = 0x00000001, - regk_iop_sw_cfg_trig2_2 = 0x00000001, - regk_iop_sw_cfg_trig2_3 = 0x00000001, - regk_iop_sw_cfg_trig3_0 = 0x00000001, - regk_iop_sw_cfg_trig3_1 = 0x00000001, - regk_iop_sw_cfg_trig3_2 = 0x00000001, - regk_iop_sw_cfg_trig3_3 = 0x00000001, - regk_iop_sw_cfg_trig4_0 = 0x00000002, - regk_iop_sw_cfg_trig4_1 = 0x00000002, - regk_iop_sw_cfg_trig4_2 = 0x00000002, - regk_iop_sw_cfg_trig4_3 = 0x00000002, - regk_iop_sw_cfg_trig5_0 = 0x00000002, - regk_iop_sw_cfg_trig5_1 = 0x00000002, - regk_iop_sw_cfg_trig5_2 = 0x00000002, - regk_iop_sw_cfg_trig5_3 = 0x00000002, - regk_iop_sw_cfg_trig6_0 = 0x00000003, - regk_iop_sw_cfg_trig6_1 = 0x00000003, - regk_iop_sw_cfg_trig6_2 = 0x00000003, - regk_iop_sw_cfg_trig6_3 = 0x00000003, - regk_iop_sw_cfg_trig7_0 = 0x00000003, - regk_iop_sw_cfg_trig7_1 = 0x00000003, - regk_iop_sw_cfg_trig7_2 = 0x00000003, - regk_iop_sw_cfg_trig7_3 = 0x00000003 -}; -#endif /* __iop_sw_cfg_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cpu_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cpu_defs.h deleted file mode 100644 index a16f556370eb..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_cpu_defs.h +++ /dev/null @@ -1,522 +0,0 @@ -#ifndef __iop_sw_cpu_defs_h -#define __iop_sw_cpu_defs_h - -/* - * This file is autogenerated from - * file: iop_sw_cpu.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_cpu_defs.h iop_sw_cpu.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sw_cpu */ - -/* Register r_mpu_trace, scope iop_sw_cpu, type r */ -typedef unsigned int reg_iop_sw_cpu_r_mpu_trace; -#define REG_RD_ADDR_iop_sw_cpu_r_mpu_trace 0 - -/* Register r_spu_trace, scope iop_sw_cpu, type r */ -typedef unsigned int reg_iop_sw_cpu_r_spu_trace; -#define REG_RD_ADDR_iop_sw_cpu_r_spu_trace 4 - -/* Register r_spu_fsm_trace, scope iop_sw_cpu, type r */ -typedef unsigned int reg_iop_sw_cpu_r_spu_fsm_trace; -#define REG_RD_ADDR_iop_sw_cpu_r_spu_fsm_trace 8 - -/* Register rw_mc_ctrl, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int keep_owner : 1; - unsigned int cmd : 2; - unsigned int size : 3; - unsigned int wr_spu_mem : 1; - unsigned int dummy1 : 25; -} reg_iop_sw_cpu_rw_mc_ctrl; -#define REG_RD_ADDR_iop_sw_cpu_rw_mc_ctrl 12 -#define REG_WR_ADDR_iop_sw_cpu_rw_mc_ctrl 12 - -/* Register rw_mc_data, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cpu_rw_mc_data; -#define REG_RD_ADDR_iop_sw_cpu_rw_mc_data 16 -#define REG_WR_ADDR_iop_sw_cpu_rw_mc_data 16 - -/* Register rw_mc_addr, scope iop_sw_cpu, type rw */ -typedef unsigned int reg_iop_sw_cpu_rw_mc_addr; -#define REG_RD_ADDR_iop_sw_cpu_rw_mc_addr 20 -#define REG_WR_ADDR_iop_sw_cpu_rw_mc_addr 20 - -/* Register rs_mc_data, scope iop_sw_cpu, type rs */ -typedef unsigned int reg_iop_sw_cpu_rs_mc_data; -#define REG_RD_ADDR_iop_sw_cpu_rs_mc_data 24 - -/* Register r_mc_data, scope iop_sw_cpu, type r */ -typedef unsigned int reg_iop_sw_cpu_r_mc_data; -#define REG_RD_ADDR_iop_sw_cpu_r_mc_data 28 - -/* Register r_mc_stat, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int busy_cpu : 1; - unsigned int busy_mpu : 1; - unsigned int busy_spu : 1; - unsigned int owned_by_cpu : 1; - unsigned int owned_by_mpu : 1; - unsigned int owned_by_spu : 1; - unsigned int dummy1 : 26; -} reg_iop_sw_cpu_r_mc_stat; -#define REG_RD_ADDR_iop_sw_cpu_r_mc_stat 32 - -/* Register rw_bus_clr_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_cpu_rw_bus_clr_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus_clr_mask 36 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus_clr_mask 36 - -/* Register rw_bus_set_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_cpu_rw_bus_set_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus_set_mask 40 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus_set_mask 40 - -/* Register rw_bus_oe_clr_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_cpu_rw_bus_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus_oe_clr_mask 44 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus_oe_clr_mask 44 - -/* Register rw_bus_oe_set_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_cpu_rw_bus_oe_set_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_bus_oe_set_mask 48 -#define REG_WR_ADDR_iop_sw_cpu_rw_bus_oe_set_mask 48 - -/* Register r_bus_in, scope iop_sw_cpu, type r */ -typedef unsigned int reg_iop_sw_cpu_r_bus_in; -#define REG_RD_ADDR_iop_sw_cpu_r_bus_in 52 - -/* Register rw_gio_clr_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cpu_rw_gio_clr_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_gio_clr_mask 56 -#define REG_WR_ADDR_iop_sw_cpu_rw_gio_clr_mask 56 - -/* Register rw_gio_set_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cpu_rw_gio_set_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_gio_set_mask 60 -#define REG_WR_ADDR_iop_sw_cpu_rw_gio_set_mask 60 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cpu_rw_gio_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_gio_oe_clr_mask 64 -#define REG_WR_ADDR_iop_sw_cpu_rw_gio_oe_clr_mask 64 - -/* Register rw_gio_oe_set_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_cpu_rw_gio_oe_set_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_gio_oe_set_mask 68 -#define REG_WR_ADDR_iop_sw_cpu_rw_gio_oe_set_mask 68 - -/* Register r_gio_in, scope iop_sw_cpu, type r */ -typedef unsigned int reg_iop_sw_cpu_r_gio_in; -#define REG_RD_ADDR_iop_sw_cpu_r_gio_in 72 - -/* Register rw_intr0_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int mpu_8 : 1; - unsigned int mpu_9 : 1; - unsigned int mpu_10 : 1; - unsigned int mpu_11 : 1; - unsigned int mpu_12 : 1; - unsigned int mpu_13 : 1; - unsigned int mpu_14 : 1; - unsigned int mpu_15 : 1; - unsigned int spu_0 : 1; - unsigned int spu_1 : 1; - unsigned int spu_2 : 1; - unsigned int spu_3 : 1; - unsigned int spu_4 : 1; - unsigned int spu_5 : 1; - unsigned int spu_6 : 1; - unsigned int spu_7 : 1; - unsigned int spu_8 : 1; - unsigned int spu_9 : 1; - unsigned int spu_10 : 1; - unsigned int spu_11 : 1; - unsigned int spu_12 : 1; - unsigned int spu_13 : 1; - unsigned int spu_14 : 1; - unsigned int spu_15 : 1; -} reg_iop_sw_cpu_rw_intr0_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_intr0_mask 76 -#define REG_WR_ADDR_iop_sw_cpu_rw_intr0_mask 76 - -/* Register rw_ack_intr0, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int mpu_8 : 1; - unsigned int mpu_9 : 1; - unsigned int mpu_10 : 1; - unsigned int mpu_11 : 1; - unsigned int mpu_12 : 1; - unsigned int mpu_13 : 1; - unsigned int mpu_14 : 1; - unsigned int mpu_15 : 1; - unsigned int spu_0 : 1; - unsigned int spu_1 : 1; - unsigned int spu_2 : 1; - unsigned int spu_3 : 1; - unsigned int spu_4 : 1; - unsigned int spu_5 : 1; - unsigned int spu_6 : 1; - unsigned int spu_7 : 1; - unsigned int spu_8 : 1; - unsigned int spu_9 : 1; - unsigned int spu_10 : 1; - unsigned int spu_11 : 1; - unsigned int spu_12 : 1; - unsigned int spu_13 : 1; - unsigned int spu_14 : 1; - unsigned int spu_15 : 1; -} reg_iop_sw_cpu_rw_ack_intr0; -#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr0 80 -#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr0 80 - -/* Register r_intr0, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int mpu_8 : 1; - unsigned int mpu_9 : 1; - unsigned int mpu_10 : 1; - unsigned int mpu_11 : 1; - unsigned int mpu_12 : 1; - unsigned int mpu_13 : 1; - unsigned int mpu_14 : 1; - unsigned int mpu_15 : 1; - unsigned int spu_0 : 1; - unsigned int spu_1 : 1; - unsigned int spu_2 : 1; - unsigned int spu_3 : 1; - unsigned int spu_4 : 1; - unsigned int spu_5 : 1; - unsigned int spu_6 : 1; - unsigned int spu_7 : 1; - unsigned int spu_8 : 1; - unsigned int spu_9 : 1; - unsigned int spu_10 : 1; - unsigned int spu_11 : 1; - unsigned int spu_12 : 1; - unsigned int spu_13 : 1; - unsigned int spu_14 : 1; - unsigned int spu_15 : 1; -} reg_iop_sw_cpu_r_intr0; -#define REG_RD_ADDR_iop_sw_cpu_r_intr0 84 - -/* Register r_masked_intr0, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_0 : 1; - unsigned int mpu_1 : 1; - unsigned int mpu_2 : 1; - unsigned int mpu_3 : 1; - unsigned int mpu_4 : 1; - unsigned int mpu_5 : 1; - unsigned int mpu_6 : 1; - unsigned int mpu_7 : 1; - unsigned int mpu_8 : 1; - unsigned int mpu_9 : 1; - unsigned int mpu_10 : 1; - unsigned int mpu_11 : 1; - unsigned int mpu_12 : 1; - unsigned int mpu_13 : 1; - unsigned int mpu_14 : 1; - unsigned int mpu_15 : 1; - unsigned int spu_0 : 1; - unsigned int spu_1 : 1; - unsigned int spu_2 : 1; - unsigned int spu_3 : 1; - unsigned int spu_4 : 1; - unsigned int spu_5 : 1; - unsigned int spu_6 : 1; - unsigned int spu_7 : 1; - unsigned int spu_8 : 1; - unsigned int spu_9 : 1; - unsigned int spu_10 : 1; - unsigned int spu_11 : 1; - unsigned int spu_12 : 1; - unsigned int spu_13 : 1; - unsigned int spu_14 : 1; - unsigned int spu_15 : 1; -} reg_iop_sw_cpu_r_masked_intr0; -#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr0 88 - -/* Register rw_intr1_mask, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int mpu_24 : 1; - unsigned int mpu_25 : 1; - unsigned int mpu_26 : 1; - unsigned int mpu_27 : 1; - unsigned int mpu_28 : 1; - unsigned int mpu_29 : 1; - unsigned int mpu_30 : 1; - unsigned int mpu_31 : 1; - unsigned int dmc_in : 1; - unsigned int dmc_out : 1; - unsigned int fifo_in : 1; - unsigned int fifo_out : 1; - unsigned int fifo_in_extra : 1; - unsigned int fifo_out_extra : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int timer_grp1 : 1; -} reg_iop_sw_cpu_rw_intr1_mask; -#define REG_RD_ADDR_iop_sw_cpu_rw_intr1_mask 92 -#define REG_WR_ADDR_iop_sw_cpu_rw_intr1_mask 92 - -/* Register rw_ack_intr1, scope iop_sw_cpu, type rw */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int mpu_24 : 1; - unsigned int mpu_25 : 1; - unsigned int mpu_26 : 1; - unsigned int mpu_27 : 1; - unsigned int mpu_28 : 1; - unsigned int mpu_29 : 1; - unsigned int mpu_30 : 1; - unsigned int mpu_31 : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_cpu_rw_ack_intr1; -#define REG_RD_ADDR_iop_sw_cpu_rw_ack_intr1 96 -#define REG_WR_ADDR_iop_sw_cpu_rw_ack_intr1 96 - -/* Register r_intr1, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int mpu_24 : 1; - unsigned int mpu_25 : 1; - unsigned int mpu_26 : 1; - unsigned int mpu_27 : 1; - unsigned int mpu_28 : 1; - unsigned int mpu_29 : 1; - unsigned int mpu_30 : 1; - unsigned int mpu_31 : 1; - unsigned int dmc_in : 1; - unsigned int dmc_out : 1; - unsigned int fifo_in : 1; - unsigned int fifo_out : 1; - unsigned int fifo_in_extra : 1; - unsigned int fifo_out_extra : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int timer_grp1 : 1; -} reg_iop_sw_cpu_r_intr1; -#define REG_RD_ADDR_iop_sw_cpu_r_intr1 100 - -/* Register r_masked_intr1, scope iop_sw_cpu, type r */ -typedef struct { - unsigned int mpu_16 : 1; - unsigned int mpu_17 : 1; - unsigned int mpu_18 : 1; - unsigned int mpu_19 : 1; - unsigned int mpu_20 : 1; - unsigned int mpu_21 : 1; - unsigned int mpu_22 : 1; - unsigned int mpu_23 : 1; - unsigned int mpu_24 : 1; - unsigned int mpu_25 : 1; - unsigned int mpu_26 : 1; - unsigned int mpu_27 : 1; - unsigned int mpu_28 : 1; - unsigned int mpu_29 : 1; - unsigned int mpu_30 : 1; - unsigned int mpu_31 : 1; - unsigned int dmc_in : 1; - unsigned int dmc_out : 1; - unsigned int fifo_in : 1; - unsigned int fifo_out : 1; - unsigned int fifo_in_extra : 1; - unsigned int fifo_out_extra : 1; - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int timer_grp1 : 1; -} reg_iop_sw_cpu_r_masked_intr1; -#define REG_RD_ADDR_iop_sw_cpu_r_masked_intr1 104 - - -/* Constants */ -enum { - regk_iop_sw_cpu_copy = 0x00000000, - regk_iop_sw_cpu_no = 0x00000000, - regk_iop_sw_cpu_rd = 0x00000002, - regk_iop_sw_cpu_reg_copy = 0x00000001, - regk_iop_sw_cpu_rw_bus_clr_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_bus_oe_clr_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_bus_oe_set_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_bus_set_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_gio_clr_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_gio_oe_clr_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_gio_oe_set_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_gio_set_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_intr0_mask_default = 0x00000000, - regk_iop_sw_cpu_rw_intr1_mask_default = 0x00000000, - regk_iop_sw_cpu_wr = 0x00000003, - regk_iop_sw_cpu_yes = 0x00000001 -}; -#endif /* __iop_sw_cpu_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_mpu_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_mpu_defs.h deleted file mode 100644 index a2e4e1a33e57..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_mpu_defs.h +++ /dev/null @@ -1,648 +0,0 @@ -#ifndef __iop_sw_mpu_defs_h -#define __iop_sw_mpu_defs_h - -/* - * This file is autogenerated from - * file: iop_sw_mpu.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_mpu_defs.h iop_sw_mpu.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sw_mpu */ - -/* Register rw_sw_cfg_owner, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int cfg : 2; - unsigned int dummy1 : 30; -} reg_iop_sw_mpu_rw_sw_cfg_owner; -#define REG_RD_ADDR_iop_sw_mpu_rw_sw_cfg_owner 0 -#define REG_WR_ADDR_iop_sw_mpu_rw_sw_cfg_owner 0 - -/* Register r_spu_trace, scope iop_sw_mpu, type r */ -typedef unsigned int reg_iop_sw_mpu_r_spu_trace; -#define REG_RD_ADDR_iop_sw_mpu_r_spu_trace 4 - -/* Register r_spu_fsm_trace, scope iop_sw_mpu, type r */ -typedef unsigned int reg_iop_sw_mpu_r_spu_fsm_trace; -#define REG_RD_ADDR_iop_sw_mpu_r_spu_fsm_trace 8 - -/* Register rw_mc_ctrl, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int keep_owner : 1; - unsigned int cmd : 2; - unsigned int size : 3; - unsigned int wr_spu_mem : 1; - unsigned int dummy1 : 25; -} reg_iop_sw_mpu_rw_mc_ctrl; -#define REG_RD_ADDR_iop_sw_mpu_rw_mc_ctrl 12 -#define REG_WR_ADDR_iop_sw_mpu_rw_mc_ctrl 12 - -/* Register rw_mc_data, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_mpu_rw_mc_data; -#define REG_RD_ADDR_iop_sw_mpu_rw_mc_data 16 -#define REG_WR_ADDR_iop_sw_mpu_rw_mc_data 16 - -/* Register rw_mc_addr, scope iop_sw_mpu, type rw */ -typedef unsigned int reg_iop_sw_mpu_rw_mc_addr; -#define REG_RD_ADDR_iop_sw_mpu_rw_mc_addr 20 -#define REG_WR_ADDR_iop_sw_mpu_rw_mc_addr 20 - -/* Register rs_mc_data, scope iop_sw_mpu, type rs */ -typedef unsigned int reg_iop_sw_mpu_rs_mc_data; -#define REG_RD_ADDR_iop_sw_mpu_rs_mc_data 24 - -/* Register r_mc_data, scope iop_sw_mpu, type r */ -typedef unsigned int reg_iop_sw_mpu_r_mc_data; -#define REG_RD_ADDR_iop_sw_mpu_r_mc_data 28 - -/* Register r_mc_stat, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int busy_cpu : 1; - unsigned int busy_mpu : 1; - unsigned int busy_spu : 1; - unsigned int owned_by_cpu : 1; - unsigned int owned_by_mpu : 1; - unsigned int owned_by_spu : 1; - unsigned int dummy1 : 26; -} reg_iop_sw_mpu_r_mc_stat; -#define REG_RD_ADDR_iop_sw_mpu_r_mc_stat 32 - -/* Register rw_bus_clr_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_mpu_rw_bus_clr_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus_clr_mask 36 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus_clr_mask 36 - -/* Register rw_bus_set_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_mpu_rw_bus_set_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus_set_mask 40 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus_set_mask 40 - -/* Register rw_bus_oe_clr_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_mpu_rw_bus_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus_oe_clr_mask 44 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus_oe_clr_mask 44 - -/* Register rw_bus_oe_set_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_mpu_rw_bus_oe_set_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_bus_oe_set_mask 48 -#define REG_WR_ADDR_iop_sw_mpu_rw_bus_oe_set_mask 48 - -/* Register r_bus_in, scope iop_sw_mpu, type r */ -typedef unsigned int reg_iop_sw_mpu_r_bus_in; -#define REG_RD_ADDR_iop_sw_mpu_r_bus_in 52 - -/* Register rw_gio_clr_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_mpu_rw_gio_clr_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_gio_clr_mask 56 -#define REG_WR_ADDR_iop_sw_mpu_rw_gio_clr_mask 56 - -/* Register rw_gio_set_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_mpu_rw_gio_set_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_gio_set_mask 60 -#define REG_WR_ADDR_iop_sw_mpu_rw_gio_set_mask 60 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_mpu_rw_gio_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_gio_oe_clr_mask 64 -#define REG_WR_ADDR_iop_sw_mpu_rw_gio_oe_clr_mask 64 - -/* Register rw_gio_oe_set_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_mpu_rw_gio_oe_set_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_gio_oe_set_mask 68 -#define REG_WR_ADDR_iop_sw_mpu_rw_gio_oe_set_mask 68 - -/* Register r_gio_in, scope iop_sw_mpu, type r */ -typedef unsigned int reg_iop_sw_mpu_r_gio_in; -#define REG_RD_ADDR_iop_sw_mpu_r_gio_in 72 - -/* Register rw_cpu_intr, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int intr16 : 1; - unsigned int intr17 : 1; - unsigned int intr18 : 1; - unsigned int intr19 : 1; - unsigned int intr20 : 1; - unsigned int intr21 : 1; - unsigned int intr22 : 1; - unsigned int intr23 : 1; - unsigned int intr24 : 1; - unsigned int intr25 : 1; - unsigned int intr26 : 1; - unsigned int intr27 : 1; - unsigned int intr28 : 1; - unsigned int intr29 : 1; - unsigned int intr30 : 1; - unsigned int intr31 : 1; -} reg_iop_sw_mpu_rw_cpu_intr; -#define REG_RD_ADDR_iop_sw_mpu_rw_cpu_intr 76 -#define REG_WR_ADDR_iop_sw_mpu_rw_cpu_intr 76 - -/* Register r_cpu_intr, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int intr16 : 1; - unsigned int intr17 : 1; - unsigned int intr18 : 1; - unsigned int intr19 : 1; - unsigned int intr20 : 1; - unsigned int intr21 : 1; - unsigned int intr22 : 1; - unsigned int intr23 : 1; - unsigned int intr24 : 1; - unsigned int intr25 : 1; - unsigned int intr26 : 1; - unsigned int intr27 : 1; - unsigned int intr28 : 1; - unsigned int intr29 : 1; - unsigned int intr30 : 1; - unsigned int intr31 : 1; -} reg_iop_sw_mpu_r_cpu_intr; -#define REG_RD_ADDR_iop_sw_mpu_r_cpu_intr 80 - -/* Register rw_intr_grp0_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu_intr0 : 1; - unsigned int trigger_grp0 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr1 : 1; - unsigned int trigger_grp1 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int spu_intr2 : 1; - unsigned int trigger_grp2 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr3 : 1; - unsigned int trigger_grp3 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_rw_intr_grp0_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp0_mask 84 -#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp0_mask 84 - -/* Register rw_ack_intr_grp0, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu_intr0 : 1; - unsigned int dummy1 : 3; - unsigned int spu_intr1 : 1; - unsigned int dummy2 : 3; - unsigned int spu_intr2 : 1; - unsigned int dummy3 : 3; - unsigned int spu_intr3 : 1; - unsigned int dummy4 : 19; -} reg_iop_sw_mpu_rw_ack_intr_grp0; -#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp0 88 -#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp0 88 - -/* Register r_intr_grp0, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu_intr0 : 1; - unsigned int trigger_grp0 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr1 : 1; - unsigned int trigger_grp1 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int spu_intr2 : 1; - unsigned int trigger_grp2 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr3 : 1; - unsigned int trigger_grp3 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_r_intr_grp0; -#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp0 92 - -/* Register r_masked_intr_grp0, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu_intr0 : 1; - unsigned int trigger_grp0 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr1 : 1; - unsigned int trigger_grp1 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int spu_intr2 : 1; - unsigned int trigger_grp2 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr3 : 1; - unsigned int trigger_grp3 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_r_masked_intr_grp0; -#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp0 96 - -/* Register rw_intr_grp1_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu_intr4 : 1; - unsigned int trigger_grp4 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr5 : 1; - unsigned int trigger_grp5 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int spu_intr6 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr7 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_rw_intr_grp1_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp1_mask 100 -#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp1_mask 100 - -/* Register rw_ack_intr_grp1, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu_intr4 : 1; - unsigned int dummy1 : 3; - unsigned int spu_intr5 : 1; - unsigned int dummy2 : 3; - unsigned int spu_intr6 : 1; - unsigned int dummy3 : 3; - unsigned int spu_intr7 : 1; - unsigned int dummy4 : 19; -} reg_iop_sw_mpu_rw_ack_intr_grp1; -#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp1 104 -#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp1 104 - -/* Register r_intr_grp1, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu_intr4 : 1; - unsigned int trigger_grp4 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr5 : 1; - unsigned int trigger_grp5 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int spu_intr6 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr7 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_r_intr_grp1; -#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp1 108 - -/* Register r_masked_intr_grp1, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu_intr4 : 1; - unsigned int trigger_grp4 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr5 : 1; - unsigned int trigger_grp5 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int spu_intr6 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr7 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_r_masked_intr_grp1; -#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp1 112 - -/* Register rw_intr_grp2_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu_intr8 : 1; - unsigned int trigger_grp0 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr9 : 1; - unsigned int trigger_grp1 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int spu_intr10 : 1; - unsigned int trigger_grp2 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr11 : 1; - unsigned int trigger_grp3 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_rw_intr_grp2_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp2_mask 116 -#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp2_mask 116 - -/* Register rw_ack_intr_grp2, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu_intr8 : 1; - unsigned int dummy1 : 3; - unsigned int spu_intr9 : 1; - unsigned int dummy2 : 3; - unsigned int spu_intr10 : 1; - unsigned int dummy3 : 3; - unsigned int spu_intr11 : 1; - unsigned int dummy4 : 19; -} reg_iop_sw_mpu_rw_ack_intr_grp2; -#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp2 120 -#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp2 120 - -/* Register r_intr_grp2, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu_intr8 : 1; - unsigned int trigger_grp0 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr9 : 1; - unsigned int trigger_grp1 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int spu_intr10 : 1; - unsigned int trigger_grp2 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr11 : 1; - unsigned int trigger_grp3 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_r_intr_grp2; -#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp2 124 - -/* Register r_masked_intr_grp2, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu_intr8 : 1; - unsigned int trigger_grp0 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr9 : 1; - unsigned int trigger_grp1 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int spu_intr10 : 1; - unsigned int trigger_grp2 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr11 : 1; - unsigned int trigger_grp3 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_r_masked_intr_grp2; -#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp2 128 - -/* Register rw_intr_grp3_mask, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu_intr12 : 1; - unsigned int trigger_grp4 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr13 : 1; - unsigned int trigger_grp5 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int spu_intr14 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr15 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_rw_intr_grp3_mask; -#define REG_RD_ADDR_iop_sw_mpu_rw_intr_grp3_mask 132 -#define REG_WR_ADDR_iop_sw_mpu_rw_intr_grp3_mask 132 - -/* Register rw_ack_intr_grp3, scope iop_sw_mpu, type rw */ -typedef struct { - unsigned int spu_intr12 : 1; - unsigned int dummy1 : 3; - unsigned int spu_intr13 : 1; - unsigned int dummy2 : 3; - unsigned int spu_intr14 : 1; - unsigned int dummy3 : 3; - unsigned int spu_intr15 : 1; - unsigned int dummy4 : 19; -} reg_iop_sw_mpu_rw_ack_intr_grp3; -#define REG_RD_ADDR_iop_sw_mpu_rw_ack_intr_grp3 136 -#define REG_WR_ADDR_iop_sw_mpu_rw_ack_intr_grp3 136 - -/* Register r_intr_grp3, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu_intr12 : 1; - unsigned int trigger_grp4 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr13 : 1; - unsigned int trigger_grp5 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int spu_intr14 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr15 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_r_intr_grp3; -#define REG_RD_ADDR_iop_sw_mpu_r_intr_grp3 140 - -/* Register r_masked_intr_grp3, scope iop_sw_mpu, type r */ -typedef struct { - unsigned int spu_intr12 : 1; - unsigned int trigger_grp4 : 1; - unsigned int fifo_out_extra : 1; - unsigned int dmc_out : 1; - unsigned int spu_intr13 : 1; - unsigned int trigger_grp5 : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_in : 1; - unsigned int spu_intr14 : 1; - unsigned int trigger_grp6 : 1; - unsigned int timer_grp0 : 1; - unsigned int fifo_out : 1; - unsigned int spu_intr15 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_mpu_r_masked_intr_grp3; -#define REG_RD_ADDR_iop_sw_mpu_r_masked_intr_grp3 144 - - -/* Constants */ -enum { - regk_iop_sw_mpu_copy = 0x00000000, - regk_iop_sw_mpu_cpu = 0x00000000, - regk_iop_sw_mpu_mpu = 0x00000001, - regk_iop_sw_mpu_no = 0x00000000, - regk_iop_sw_mpu_nop = 0x00000000, - regk_iop_sw_mpu_rd = 0x00000002, - regk_iop_sw_mpu_reg_copy = 0x00000001, - regk_iop_sw_mpu_rw_bus_clr_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_bus_oe_clr_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_bus_oe_set_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_bus_set_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_gio_clr_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_gio_oe_clr_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_gio_oe_set_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_gio_set_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_intr_grp0_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_intr_grp1_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_intr_grp2_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_intr_grp3_mask_default = 0x00000000, - regk_iop_sw_mpu_rw_sw_cfg_owner_default = 0x00000000, - regk_iop_sw_mpu_set = 0x00000001, - regk_iop_sw_mpu_spu = 0x00000002, - regk_iop_sw_mpu_wr = 0x00000003, - regk_iop_sw_mpu_yes = 0x00000001 -}; -#endif /* __iop_sw_mpu_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_spu_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_spu_defs.h deleted file mode 100644 index c8560b865a1a..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_sw_spu_defs.h +++ /dev/null @@ -1,441 +0,0 @@ -#ifndef __iop_sw_spu_defs_h -#define __iop_sw_spu_defs_h - -/* - * This file is autogenerated from - * file: iop_sw_spu.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile iop_sw_spu_defs.h iop_sw_spu.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_sw_spu */ - -/* Register r_mpu_trace, scope iop_sw_spu, type r */ -typedef unsigned int reg_iop_sw_spu_r_mpu_trace; -#define REG_RD_ADDR_iop_sw_spu_r_mpu_trace 0 - -/* Register rw_mc_ctrl, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int keep_owner : 1; - unsigned int cmd : 2; - unsigned int size : 3; - unsigned int wr_spu_mem : 1; - unsigned int dummy1 : 25; -} reg_iop_sw_spu_rw_mc_ctrl; -#define REG_RD_ADDR_iop_sw_spu_rw_mc_ctrl 4 -#define REG_WR_ADDR_iop_sw_spu_rw_mc_ctrl 4 - -/* Register rw_mc_data, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_spu_rw_mc_data; -#define REG_RD_ADDR_iop_sw_spu_rw_mc_data 8 -#define REG_WR_ADDR_iop_sw_spu_rw_mc_data 8 - -/* Register rw_mc_addr, scope iop_sw_spu, type rw */ -typedef unsigned int reg_iop_sw_spu_rw_mc_addr; -#define REG_RD_ADDR_iop_sw_spu_rw_mc_addr 12 -#define REG_WR_ADDR_iop_sw_spu_rw_mc_addr 12 - -/* Register rs_mc_data, scope iop_sw_spu, type rs */ -typedef unsigned int reg_iop_sw_spu_rs_mc_data; -#define REG_RD_ADDR_iop_sw_spu_rs_mc_data 16 - -/* Register r_mc_data, scope iop_sw_spu, type r */ -typedef unsigned int reg_iop_sw_spu_r_mc_data; -#define REG_RD_ADDR_iop_sw_spu_r_mc_data 20 - -/* Register r_mc_stat, scope iop_sw_spu, type r */ -typedef struct { - unsigned int busy_cpu : 1; - unsigned int busy_mpu : 1; - unsigned int busy_spu : 1; - unsigned int owned_by_cpu : 1; - unsigned int owned_by_mpu : 1; - unsigned int owned_by_spu : 1; - unsigned int dummy1 : 26; -} reg_iop_sw_spu_r_mc_stat; -#define REG_RD_ADDR_iop_sw_spu_r_mc_stat 24 - -/* Register rw_bus_clr_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_spu_rw_bus_clr_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus_clr_mask 28 -#define REG_WR_ADDR_iop_sw_spu_rw_bus_clr_mask 28 - -/* Register rw_bus_set_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int byte2 : 8; - unsigned int byte3 : 8; -} reg_iop_sw_spu_rw_bus_set_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus_set_mask 32 -#define REG_WR_ADDR_iop_sw_spu_rw_bus_set_mask 32 - -/* Register rw_bus_oe_clr_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_spu_rw_bus_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus_oe_clr_mask 36 -#define REG_WR_ADDR_iop_sw_spu_rw_bus_oe_clr_mask 36 - -/* Register rw_bus_oe_set_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 1; - unsigned int byte1 : 1; - unsigned int byte2 : 1; - unsigned int byte3 : 1; - unsigned int dummy1 : 28; -} reg_iop_sw_spu_rw_bus_oe_set_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_bus_oe_set_mask 40 -#define REG_WR_ADDR_iop_sw_spu_rw_bus_oe_set_mask 40 - -/* Register r_bus_in, scope iop_sw_spu, type r */ -typedef unsigned int reg_iop_sw_spu_r_bus_in; -#define REG_RD_ADDR_iop_sw_spu_r_bus_in 44 - -/* Register rw_gio_clr_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_spu_rw_gio_clr_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask 48 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask 48 - -/* Register rw_gio_set_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_spu_rw_gio_set_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask 52 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask 52 - -/* Register rw_gio_oe_clr_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_spu_rw_gio_oe_clr_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask 56 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask 56 - -/* Register rw_gio_oe_set_mask, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 32; -} reg_iop_sw_spu_rw_gio_oe_set_mask; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask 60 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask 60 - -/* Register r_gio_in, scope iop_sw_spu, type r */ -typedef unsigned int reg_iop_sw_spu_r_gio_in; -#define REG_RD_ADDR_iop_sw_spu_r_gio_in 64 - -/* Register rw_bus_clr_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus_clr_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_bus_clr_mask_lo 68 -#define REG_WR_ADDR_iop_sw_spu_rw_bus_clr_mask_lo 68 - -/* Register rw_bus_clr_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte2 : 8; - unsigned int byte3 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus_clr_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_bus_clr_mask_hi 72 -#define REG_WR_ADDR_iop_sw_spu_rw_bus_clr_mask_hi 72 - -/* Register rw_bus_set_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte0 : 8; - unsigned int byte1 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus_set_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_bus_set_mask_lo 76 -#define REG_WR_ADDR_iop_sw_spu_rw_bus_set_mask_lo 76 - -/* Register rw_bus_set_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int byte2 : 8; - unsigned int byte3 : 8; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_bus_set_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_bus_set_mask_hi 80 -#define REG_WR_ADDR_iop_sw_spu_rw_bus_set_mask_hi 80 - -/* Register rw_gio_clr_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_clr_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask_lo 84 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask_lo 84 - -/* Register rw_gio_clr_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_clr_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_clr_mask_hi 88 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_clr_mask_hi 88 - -/* Register rw_gio_set_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_set_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask_lo 92 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask_lo 92 - -/* Register rw_gio_set_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_set_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_set_mask_hi 96 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_set_mask_hi 96 - -/* Register rw_gio_oe_clr_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_oe_clr_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_lo 100 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_lo 100 - -/* Register rw_gio_oe_clr_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_oe_clr_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_hi 104 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_clr_mask_hi 104 - -/* Register rw_gio_oe_set_mask_lo, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_oe_set_mask_lo; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask_lo 108 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask_lo 108 - -/* Register rw_gio_oe_set_mask_hi, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int val : 16; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_gio_oe_set_mask_hi; -#define REG_RD_ADDR_iop_sw_spu_rw_gio_oe_set_mask_hi 112 -#define REG_WR_ADDR_iop_sw_spu_rw_gio_oe_set_mask_hi 112 - -/* Register rw_cpu_intr, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_cpu_intr; -#define REG_RD_ADDR_iop_sw_spu_rw_cpu_intr 116 -#define REG_WR_ADDR_iop_sw_spu_rw_cpu_intr 116 - -/* Register r_cpu_intr, scope iop_sw_spu, type r */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_r_cpu_intr; -#define REG_RD_ADDR_iop_sw_spu_r_cpu_intr 120 - -/* Register r_hw_intr, scope iop_sw_spu, type r */ -typedef struct { - unsigned int trigger_grp0 : 1; - unsigned int trigger_grp1 : 1; - unsigned int trigger_grp2 : 1; - unsigned int trigger_grp3 : 1; - unsigned int trigger_grp4 : 1; - unsigned int trigger_grp5 : 1; - unsigned int trigger_grp6 : 1; - unsigned int trigger_grp7 : 1; - unsigned int timer_grp0 : 1; - unsigned int timer_grp1 : 1; - unsigned int fifo_out : 1; - unsigned int fifo_out_extra : 1; - unsigned int fifo_in : 1; - unsigned int fifo_in_extra : 1; - unsigned int dmc_out : 1; - unsigned int dmc_in : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_r_hw_intr; -#define REG_RD_ADDR_iop_sw_spu_r_hw_intr 124 - -/* Register rw_mpu_intr, scope iop_sw_spu, type rw */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_rw_mpu_intr; -#define REG_RD_ADDR_iop_sw_spu_rw_mpu_intr 128 -#define REG_WR_ADDR_iop_sw_spu_rw_mpu_intr 128 - -/* Register r_mpu_intr, scope iop_sw_spu, type r */ -typedef struct { - unsigned int intr0 : 1; - unsigned int intr1 : 1; - unsigned int intr2 : 1; - unsigned int intr3 : 1; - unsigned int intr4 : 1; - unsigned int intr5 : 1; - unsigned int intr6 : 1; - unsigned int intr7 : 1; - unsigned int intr8 : 1; - unsigned int intr9 : 1; - unsigned int intr10 : 1; - unsigned int intr11 : 1; - unsigned int intr12 : 1; - unsigned int intr13 : 1; - unsigned int intr14 : 1; - unsigned int intr15 : 1; - unsigned int dummy1 : 16; -} reg_iop_sw_spu_r_mpu_intr; -#define REG_RD_ADDR_iop_sw_spu_r_mpu_intr 132 - - -/* Constants */ -enum { - regk_iop_sw_spu_copy = 0x00000000, - regk_iop_sw_spu_no = 0x00000000, - regk_iop_sw_spu_nop = 0x00000000, - regk_iop_sw_spu_rd = 0x00000002, - regk_iop_sw_spu_reg_copy = 0x00000001, - regk_iop_sw_spu_rw_bus_clr_mask_default = 0x00000000, - regk_iop_sw_spu_rw_bus_oe_clr_mask_default = 0x00000000, - regk_iop_sw_spu_rw_bus_oe_set_mask_default = 0x00000000, - regk_iop_sw_spu_rw_bus_set_mask_default = 0x00000000, - regk_iop_sw_spu_rw_gio_clr_mask_default = 0x00000000, - regk_iop_sw_spu_rw_gio_oe_clr_mask_default = 0x00000000, - regk_iop_sw_spu_rw_gio_oe_set_mask_default = 0x00000000, - regk_iop_sw_spu_rw_gio_set_mask_default = 0x00000000, - regk_iop_sw_spu_set = 0x00000001, - regk_iop_sw_spu_wr = 0x00000003, - regk_iop_sw_spu_yes = 0x00000001 -}; -#endif /* __iop_sw_spu_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_version_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_version_defs.h deleted file mode 100644 index 20de425e652b..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/iop/iop_version_defs.h +++ /dev/null @@ -1,96 +0,0 @@ -#ifndef __iop_version_defs_h -#define __iop_version_defs_h - -/* - * This file is autogenerated from - * file: iop_version.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile iop_version_defs.h iop_version.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope iop_version */ - -/* Register r_version, scope iop_version, type r */ -typedef struct { - unsigned int nr : 8; - unsigned int dummy1 : 24; -} reg_iop_version_r_version; -#define REG_RD_ADDR_iop_version_r_version 0 - - -/* Constants */ -enum { - regk_iop_version_v2_0 = 0x00000002 -}; -#endif /* __iop_version_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/l2cache_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/l2cache_defs.h deleted file mode 100644 index 243ac3c882cb..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/l2cache_defs.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef __l2cache_defs_h -#define __l2cache_defs_h - -/* - * This file is autogenerated from - * file: l2cache.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile l2cache_defs.h l2cache.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope l2cache */ - -/* Register rw_cfg, scope l2cache, type rw */ -typedef struct { - unsigned int en : 1; - unsigned int dummy1 : 31; -} reg_l2cache_rw_cfg; -#define REG_RD_ADDR_l2cache_rw_cfg 0 -#define REG_WR_ADDR_l2cache_rw_cfg 0 - -/* Register rw_ctrl, scope l2cache, type rw */ -typedef struct { - unsigned int dummy1 : 7; - unsigned int cbase : 9; - unsigned int dummy2 : 4; - unsigned int csize : 10; - unsigned int dummy3 : 2; -} reg_l2cache_rw_ctrl; -#define REG_RD_ADDR_l2cache_rw_ctrl 4 -#define REG_WR_ADDR_l2cache_rw_ctrl 4 - -/* Register rw_idxop, scope l2cache, type rw */ -typedef struct { - unsigned int idx : 10; - unsigned int dummy1 : 14; - unsigned int way : 3; - unsigned int dummy2 : 2; - unsigned int cmd : 3; -} reg_l2cache_rw_idxop; -#define REG_RD_ADDR_l2cache_rw_idxop 8 -#define REG_WR_ADDR_l2cache_rw_idxop 8 - -/* Register rw_addrop_addr, scope l2cache, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_l2cache_rw_addrop_addr; -#define REG_RD_ADDR_l2cache_rw_addrop_addr 12 -#define REG_WR_ADDR_l2cache_rw_addrop_addr 12 - -/* Register rw_addrop_ctrl, scope l2cache, type rw */ -typedef struct { - unsigned int size : 16; - unsigned int dummy1 : 13; - unsigned int cmd : 3; -} reg_l2cache_rw_addrop_ctrl; -#define REG_RD_ADDR_l2cache_rw_addrop_ctrl 16 -#define REG_WR_ADDR_l2cache_rw_addrop_ctrl 16 - - -/* Constants */ -enum { - regk_l2cache_flush = 0x00000001, - regk_l2cache_no = 0x00000000, - regk_l2cache_rw_addrop_addr_default = 0x00000000, - regk_l2cache_rw_addrop_ctrl_default = 0x00000000, - regk_l2cache_rw_cfg_default = 0x00000000, - regk_l2cache_rw_ctrl_default = 0x00000000, - regk_l2cache_rw_idxop_default = 0x00000000, - regk_l2cache_yes = 0x00000001 -}; -#endif /* __l2cache_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/marb_bar_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/marb_bar_defs.h deleted file mode 100644 index c0e7628cbf7d..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/marb_bar_defs.h +++ /dev/null @@ -1,482 +0,0 @@ -#ifndef __marb_bar_defs_h -#define __marb_bar_defs_h - -/* - * This file is autogenerated from - * file: marb_bar.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile marb_bar_defs.h marb_bar.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope marb_bar */ - -#define STRIDE_marb_bar_rw_ddr2_slots 4 -/* Register rw_ddr2_slots, scope marb_bar, type rw */ -typedef struct { - unsigned int owner : 4; - unsigned int dummy1 : 28; -} reg_marb_bar_rw_ddr2_slots; -#define REG_RD_ADDR_marb_bar_rw_ddr2_slots 0 -#define REG_WR_ADDR_marb_bar_rw_ddr2_slots 0 - -/* Register rw_h264_rd_burst, scope marb_bar, type rw */ -typedef struct { - unsigned int ddr2_bsize : 2; - unsigned int dummy1 : 30; -} reg_marb_bar_rw_h264_rd_burst; -#define REG_RD_ADDR_marb_bar_rw_h264_rd_burst 256 -#define REG_WR_ADDR_marb_bar_rw_h264_rd_burst 256 - -/* Register rw_h264_wr_burst, scope marb_bar, type rw */ -typedef struct { - unsigned int ddr2_bsize : 2; - unsigned int dummy1 : 30; -} reg_marb_bar_rw_h264_wr_burst; -#define REG_RD_ADDR_marb_bar_rw_h264_wr_burst 260 -#define REG_WR_ADDR_marb_bar_rw_h264_wr_burst 260 - -/* Register rw_ccd_burst, scope marb_bar, type rw */ -typedef struct { - unsigned int ddr2_bsize : 2; - unsigned int dummy1 : 30; -} reg_marb_bar_rw_ccd_burst; -#define REG_RD_ADDR_marb_bar_rw_ccd_burst 264 -#define REG_WR_ADDR_marb_bar_rw_ccd_burst 264 - -/* Register rw_vin_wr_burst, scope marb_bar, type rw */ -typedef struct { - unsigned int ddr2_bsize : 2; - unsigned int dummy1 : 30; -} reg_marb_bar_rw_vin_wr_burst; -#define REG_RD_ADDR_marb_bar_rw_vin_wr_burst 268 -#define REG_WR_ADDR_marb_bar_rw_vin_wr_burst 268 - -/* Register rw_vin_rd_burst, scope marb_bar, type rw */ -typedef struct { - unsigned int ddr2_bsize : 2; - unsigned int dummy1 : 30; -} reg_marb_bar_rw_vin_rd_burst; -#define REG_RD_ADDR_marb_bar_rw_vin_rd_burst 272 -#define REG_WR_ADDR_marb_bar_rw_vin_rd_burst 272 - -/* Register rw_sclr_rd_burst, scope marb_bar, type rw */ -typedef struct { - unsigned int ddr2_bsize : 2; - unsigned int dummy1 : 30; -} reg_marb_bar_rw_sclr_rd_burst; -#define REG_RD_ADDR_marb_bar_rw_sclr_rd_burst 276 -#define REG_WR_ADDR_marb_bar_rw_sclr_rd_burst 276 - -/* Register rw_vout_burst, scope marb_bar, type rw */ -typedef struct { - unsigned int ddr2_bsize : 2; - unsigned int dummy1 : 30; -} reg_marb_bar_rw_vout_burst; -#define REG_RD_ADDR_marb_bar_rw_vout_burst 280 -#define REG_WR_ADDR_marb_bar_rw_vout_burst 280 - -/* Register rw_sclr_fifo_burst, scope marb_bar, type rw */ -typedef struct { - unsigned int ddr2_bsize : 2; - unsigned int dummy1 : 30; -} reg_marb_bar_rw_sclr_fifo_burst; -#define REG_RD_ADDR_marb_bar_rw_sclr_fifo_burst 284 -#define REG_WR_ADDR_marb_bar_rw_sclr_fifo_burst 284 - -/* Register rw_l2cache_burst, scope marb_bar, type rw */ -typedef struct { - unsigned int ddr2_bsize : 2; - unsigned int dummy1 : 30; -} reg_marb_bar_rw_l2cache_burst; -#define REG_RD_ADDR_marb_bar_rw_l2cache_burst 288 -#define REG_WR_ADDR_marb_bar_rw_l2cache_burst 288 - -/* Register rw_intr_mask, scope marb_bar, type rw */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_bar_rw_intr_mask; -#define REG_RD_ADDR_marb_bar_rw_intr_mask 292 -#define REG_WR_ADDR_marb_bar_rw_intr_mask 292 - -/* Register rw_ack_intr, scope marb_bar, type rw */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_bar_rw_ack_intr; -#define REG_RD_ADDR_marb_bar_rw_ack_intr 296 -#define REG_WR_ADDR_marb_bar_rw_ack_intr 296 - -/* Register r_intr, scope marb_bar, type r */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_bar_r_intr; -#define REG_RD_ADDR_marb_bar_r_intr 300 - -/* Register r_masked_intr, scope marb_bar, type r */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_bar_r_masked_intr; -#define REG_RD_ADDR_marb_bar_r_masked_intr 304 - -/* Register rw_stop_mask, scope marb_bar, type rw */ -typedef struct { - unsigned int h264_rd : 1; - unsigned int h264_wr : 1; - unsigned int ccd : 1; - unsigned int vin_wr : 1; - unsigned int vin_rd : 1; - unsigned int sclr_rd : 1; - unsigned int vout : 1; - unsigned int sclr_fifo : 1; - unsigned int l2cache : 1; - unsigned int dummy1 : 23; -} reg_marb_bar_rw_stop_mask; -#define REG_RD_ADDR_marb_bar_rw_stop_mask 308 -#define REG_WR_ADDR_marb_bar_rw_stop_mask 308 - -/* Register r_stopped, scope marb_bar, type r */ -typedef struct { - unsigned int h264_rd : 1; - unsigned int h264_wr : 1; - unsigned int ccd : 1; - unsigned int vin_wr : 1; - unsigned int vin_rd : 1; - unsigned int sclr_rd : 1; - unsigned int vout : 1; - unsigned int sclr_fifo : 1; - unsigned int l2cache : 1; - unsigned int dummy1 : 23; -} reg_marb_bar_r_stopped; -#define REG_RD_ADDR_marb_bar_r_stopped 312 - -/* Register rw_no_snoop, scope marb_bar, type rw */ -typedef struct { - unsigned int h264_rd : 1; - unsigned int h264_wr : 1; - unsigned int ccd : 1; - unsigned int vin_wr : 1; - unsigned int vin_rd : 1; - unsigned int sclr_rd : 1; - unsigned int vout : 1; - unsigned int sclr_fifo : 1; - unsigned int l2cache : 1; - unsigned int dummy1 : 23; -} reg_marb_bar_rw_no_snoop; -#define REG_RD_ADDR_marb_bar_rw_no_snoop 576 -#define REG_WR_ADDR_marb_bar_rw_no_snoop 576 - - -/* Constants */ -enum { - regk_marb_bar_ccd = 0x00000002, - regk_marb_bar_h264_rd = 0x00000000, - regk_marb_bar_h264_wr = 0x00000001, - regk_marb_bar_l2cache = 0x00000008, - regk_marb_bar_no = 0x00000000, - regk_marb_bar_r_stopped_default = 0x00000000, - regk_marb_bar_rw_ccd_burst_default = 0x00000000, - regk_marb_bar_rw_ddr2_slots_default = 0x00000000, - regk_marb_bar_rw_ddr2_slots_size = 0x00000040, - regk_marb_bar_rw_h264_rd_burst_default = 0x00000000, - regk_marb_bar_rw_h264_wr_burst_default = 0x00000000, - regk_marb_bar_rw_intr_mask_default = 0x00000000, - regk_marb_bar_rw_l2cache_burst_default = 0x00000000, - regk_marb_bar_rw_no_snoop_default = 0x00000000, - regk_marb_bar_rw_sclr_fifo_burst_default = 0x00000000, - regk_marb_bar_rw_sclr_rd_burst_default = 0x00000000, - regk_marb_bar_rw_stop_mask_default = 0x00000000, - regk_marb_bar_rw_vin_rd_burst_default = 0x00000000, - regk_marb_bar_rw_vin_wr_burst_default = 0x00000000, - regk_marb_bar_rw_vout_burst_default = 0x00000000, - regk_marb_bar_sclr_fifo = 0x00000007, - regk_marb_bar_sclr_rd = 0x00000005, - regk_marb_bar_vin_rd = 0x00000004, - regk_marb_bar_vin_wr = 0x00000003, - regk_marb_bar_vout = 0x00000006, - regk_marb_bar_yes = 0x00000001 -}; -#endif /* __marb_bar_defs_h */ -#ifndef __marb_bar_bp_defs_h -#define __marb_bar_bp_defs_h - -/* - * This file is autogenerated from - * file: marb_bar.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile marb_bar_defs.h marb_bar.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope marb_bar_bp */ - -/* Register rw_first_addr, scope marb_bar_bp, type rw */ -typedef unsigned int reg_marb_bar_bp_rw_first_addr; -#define REG_RD_ADDR_marb_bar_bp_rw_first_addr 0 -#define REG_WR_ADDR_marb_bar_bp_rw_first_addr 0 - -/* Register rw_last_addr, scope marb_bar_bp, type rw */ -typedef unsigned int reg_marb_bar_bp_rw_last_addr; -#define REG_RD_ADDR_marb_bar_bp_rw_last_addr 4 -#define REG_WR_ADDR_marb_bar_bp_rw_last_addr 4 - -/* Register rw_op, scope marb_bar_bp, type rw */ -typedef struct { - unsigned int rd : 1; - unsigned int wr : 1; - unsigned int rd_excl : 1; - unsigned int pri_wr : 1; - unsigned int us_rd : 1; - unsigned int us_wr : 1; - unsigned int us_rd_excl : 1; - unsigned int us_pri_wr : 1; - unsigned int dummy1 : 24; -} reg_marb_bar_bp_rw_op; -#define REG_RD_ADDR_marb_bar_bp_rw_op 8 -#define REG_WR_ADDR_marb_bar_bp_rw_op 8 - -/* Register rw_clients, scope marb_bar_bp, type rw */ -typedef struct { - unsigned int h264_rd : 1; - unsigned int h264_wr : 1; - unsigned int ccd : 1; - unsigned int vin_wr : 1; - unsigned int vin_rd : 1; - unsigned int sclr_rd : 1; - unsigned int vout : 1; - unsigned int sclr_fifo : 1; - unsigned int l2cache : 1; - unsigned int dummy1 : 23; -} reg_marb_bar_bp_rw_clients; -#define REG_RD_ADDR_marb_bar_bp_rw_clients 12 -#define REG_WR_ADDR_marb_bar_bp_rw_clients 12 - -/* Register rw_options, scope marb_bar_bp, type rw */ -typedef struct { - unsigned int wrap : 1; - unsigned int dummy1 : 31; -} reg_marb_bar_bp_rw_options; -#define REG_RD_ADDR_marb_bar_bp_rw_options 16 -#define REG_WR_ADDR_marb_bar_bp_rw_options 16 - -/* Register r_brk_addr, scope marb_bar_bp, type r */ -typedef unsigned int reg_marb_bar_bp_r_brk_addr; -#define REG_RD_ADDR_marb_bar_bp_r_brk_addr 20 - -/* Register r_brk_op, scope marb_bar_bp, type r */ -typedef struct { - unsigned int rd : 1; - unsigned int wr : 1; - unsigned int rd_excl : 1; - unsigned int pri_wr : 1; - unsigned int us_rd : 1; - unsigned int us_wr : 1; - unsigned int us_rd_excl : 1; - unsigned int us_pri_wr : 1; - unsigned int dummy1 : 24; -} reg_marb_bar_bp_r_brk_op; -#define REG_RD_ADDR_marb_bar_bp_r_brk_op 24 - -/* Register r_brk_clients, scope marb_bar_bp, type r */ -typedef struct { - unsigned int h264_rd : 1; - unsigned int h264_wr : 1; - unsigned int ccd : 1; - unsigned int vin_wr : 1; - unsigned int vin_rd : 1; - unsigned int sclr_rd : 1; - unsigned int vout : 1; - unsigned int sclr_fifo : 1; - unsigned int l2cache : 1; - unsigned int dummy1 : 23; -} reg_marb_bar_bp_r_brk_clients; -#define REG_RD_ADDR_marb_bar_bp_r_brk_clients 28 - -/* Register r_brk_first_client, scope marb_bar_bp, type r */ -typedef struct { - unsigned int h264_rd : 1; - unsigned int h264_wr : 1; - unsigned int ccd : 1; - unsigned int vin_wr : 1; - unsigned int vin_rd : 1; - unsigned int sclr_rd : 1; - unsigned int vout : 1; - unsigned int sclr_fifo : 1; - unsigned int l2cache : 1; - unsigned int dummy1 : 23; -} reg_marb_bar_bp_r_brk_first_client; -#define REG_RD_ADDR_marb_bar_bp_r_brk_first_client 32 - -/* Register r_brk_size, scope marb_bar_bp, type r */ -typedef unsigned int reg_marb_bar_bp_r_brk_size; -#define REG_RD_ADDR_marb_bar_bp_r_brk_size 36 - -/* Register rw_ack, scope marb_bar_bp, type rw */ -typedef unsigned int reg_marb_bar_bp_rw_ack; -#define REG_RD_ADDR_marb_bar_bp_rw_ack 40 -#define REG_WR_ADDR_marb_bar_bp_rw_ack 40 - - -/* Constants */ -enum { - regk_marb_bar_bp_no = 0x00000000, - regk_marb_bar_bp_rw_op_default = 0x00000000, - regk_marb_bar_bp_rw_options_default = 0x00000000, - regk_marb_bar_bp_yes = 0x00000001 -}; -#endif /* __marb_bar_bp_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/marb_foo_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/marb_foo_defs.h deleted file mode 100644 index 2baa833f109a..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/marb_foo_defs.h +++ /dev/null @@ -1,626 +0,0 @@ -#ifndef __marb_foo_defs_h -#define __marb_foo_defs_h - -/* - * This file is autogenerated from - * file: marb_foo.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile marb_foo_defs.h marb_foo.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope marb_foo */ - -#define STRIDE_marb_foo_rw_intm_slots 4 -/* Register rw_intm_slots, scope marb_foo, type rw */ -typedef struct { - unsigned int owner : 4; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_intm_slots; -#define REG_RD_ADDR_marb_foo_rw_intm_slots 0 -#define REG_WR_ADDR_marb_foo_rw_intm_slots 0 - -#define STRIDE_marb_foo_rw_l2_slots 4 -/* Register rw_l2_slots, scope marb_foo, type rw */ -typedef struct { - unsigned int owner : 4; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_l2_slots; -#define REG_RD_ADDR_marb_foo_rw_l2_slots 256 -#define REG_WR_ADDR_marb_foo_rw_l2_slots 256 - -#define STRIDE_marb_foo_rw_regs_slots 4 -/* Register rw_regs_slots, scope marb_foo, type rw */ -typedef struct { - unsigned int owner : 4; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_regs_slots; -#define REG_RD_ADDR_marb_foo_rw_regs_slots 512 -#define REG_WR_ADDR_marb_foo_rw_regs_slots 512 - -/* Register rw_sclr_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_sclr_burst; -#define REG_RD_ADDR_marb_foo_rw_sclr_burst 528 -#define REG_WR_ADDR_marb_foo_rw_sclr_burst 528 - -/* Register rw_dma0_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_dma0_burst; -#define REG_RD_ADDR_marb_foo_rw_dma0_burst 532 -#define REG_WR_ADDR_marb_foo_rw_dma0_burst 532 - -/* Register rw_dma1_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_dma1_burst; -#define REG_RD_ADDR_marb_foo_rw_dma1_burst 536 -#define REG_WR_ADDR_marb_foo_rw_dma1_burst 536 - -/* Register rw_dma2_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_dma2_burst; -#define REG_RD_ADDR_marb_foo_rw_dma2_burst 540 -#define REG_WR_ADDR_marb_foo_rw_dma2_burst 540 - -/* Register rw_dma3_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_dma3_burst; -#define REG_RD_ADDR_marb_foo_rw_dma3_burst 544 -#define REG_WR_ADDR_marb_foo_rw_dma3_burst 544 - -/* Register rw_dma4_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_dma4_burst; -#define REG_RD_ADDR_marb_foo_rw_dma4_burst 548 -#define REG_WR_ADDR_marb_foo_rw_dma4_burst 548 - -/* Register rw_dma5_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_dma5_burst; -#define REG_RD_ADDR_marb_foo_rw_dma5_burst 552 -#define REG_WR_ADDR_marb_foo_rw_dma5_burst 552 - -/* Register rw_dma6_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_dma6_burst; -#define REG_RD_ADDR_marb_foo_rw_dma6_burst 556 -#define REG_WR_ADDR_marb_foo_rw_dma6_burst 556 - -/* Register rw_dma7_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_dma7_burst; -#define REG_RD_ADDR_marb_foo_rw_dma7_burst 560 -#define REG_WR_ADDR_marb_foo_rw_dma7_burst 560 - -/* Register rw_dma9_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_dma9_burst; -#define REG_RD_ADDR_marb_foo_rw_dma9_burst 564 -#define REG_WR_ADDR_marb_foo_rw_dma9_burst 564 - -/* Register rw_dma11_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_dma11_burst; -#define REG_RD_ADDR_marb_foo_rw_dma11_burst 568 -#define REG_WR_ADDR_marb_foo_rw_dma11_burst 568 - -/* Register rw_cpui_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_cpui_burst; -#define REG_RD_ADDR_marb_foo_rw_cpui_burst 572 -#define REG_WR_ADDR_marb_foo_rw_cpui_burst 572 - -/* Register rw_cpud_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_cpud_burst; -#define REG_RD_ADDR_marb_foo_rw_cpud_burst 576 -#define REG_WR_ADDR_marb_foo_rw_cpud_burst 576 - -/* Register rw_iop_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_iop_burst; -#define REG_RD_ADDR_marb_foo_rw_iop_burst 580 -#define REG_WR_ADDR_marb_foo_rw_iop_burst 580 - -/* Register rw_ccdstat_burst, scope marb_foo, type rw */ -typedef struct { - unsigned int intm_bsize : 2; - unsigned int l2_bsize : 2; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_ccdstat_burst; -#define REG_RD_ADDR_marb_foo_rw_ccdstat_burst 584 -#define REG_WR_ADDR_marb_foo_rw_ccdstat_burst 584 - -/* Register rw_intr_mask, scope marb_foo, type rw */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_intr_mask; -#define REG_RD_ADDR_marb_foo_rw_intr_mask 588 -#define REG_WR_ADDR_marb_foo_rw_intr_mask 588 - -/* Register rw_ack_intr, scope marb_foo, type rw */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_foo_rw_ack_intr; -#define REG_RD_ADDR_marb_foo_rw_ack_intr 592 -#define REG_WR_ADDR_marb_foo_rw_ack_intr 592 - -/* Register r_intr, scope marb_foo, type r */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_foo_r_intr; -#define REG_RD_ADDR_marb_foo_r_intr 596 - -/* Register r_masked_intr, scope marb_foo, type r */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_foo_r_masked_intr; -#define REG_RD_ADDR_marb_foo_r_masked_intr 600 - -/* Register rw_stop_mask, scope marb_foo, type rw */ -typedef struct { - unsigned int sclr : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma9 : 1; - unsigned int dma11 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int ccdstat : 1; - unsigned int dummy1 : 17; -} reg_marb_foo_rw_stop_mask; -#define REG_RD_ADDR_marb_foo_rw_stop_mask 604 -#define REG_WR_ADDR_marb_foo_rw_stop_mask 604 - -/* Register r_stopped, scope marb_foo, type r */ -typedef struct { - unsigned int sclr : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma9 : 1; - unsigned int dma11 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int ccdstat : 1; - unsigned int dummy1 : 17; -} reg_marb_foo_r_stopped; -#define REG_RD_ADDR_marb_foo_r_stopped 608 - -/* Register rw_no_snoop, scope marb_foo, type rw */ -typedef struct { - unsigned int sclr : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma9 : 1; - unsigned int dma11 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int ccdstat : 1; - unsigned int dummy1 : 17; -} reg_marb_foo_rw_no_snoop; -#define REG_RD_ADDR_marb_foo_rw_no_snoop 896 -#define REG_WR_ADDR_marb_foo_rw_no_snoop 896 - -/* Register rw_no_snoop_rq, scope marb_foo, type rw */ -typedef struct { - unsigned int dummy1 : 11; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int dummy2 : 19; -} reg_marb_foo_rw_no_snoop_rq; -#define REG_RD_ADDR_marb_foo_rw_no_snoop_rq 900 -#define REG_WR_ADDR_marb_foo_rw_no_snoop_rq 900 - - -/* Constants */ -enum { - regk_marb_foo_ccdstat = 0x0000000e, - regk_marb_foo_cpud = 0x0000000c, - regk_marb_foo_cpui = 0x0000000b, - regk_marb_foo_dma0 = 0x00000001, - regk_marb_foo_dma1 = 0x00000002, - regk_marb_foo_dma11 = 0x0000000a, - regk_marb_foo_dma2 = 0x00000003, - regk_marb_foo_dma3 = 0x00000004, - regk_marb_foo_dma4 = 0x00000005, - regk_marb_foo_dma5 = 0x00000006, - regk_marb_foo_dma6 = 0x00000007, - regk_marb_foo_dma7 = 0x00000008, - regk_marb_foo_dma9 = 0x00000009, - regk_marb_foo_iop = 0x0000000d, - regk_marb_foo_no = 0x00000000, - regk_marb_foo_r_stopped_default = 0x00000000, - regk_marb_foo_rw_ccdstat_burst_default = 0x00000000, - regk_marb_foo_rw_cpud_burst_default = 0x00000000, - regk_marb_foo_rw_cpui_burst_default = 0x00000000, - regk_marb_foo_rw_dma0_burst_default = 0x00000000, - regk_marb_foo_rw_dma11_burst_default = 0x00000000, - regk_marb_foo_rw_dma1_burst_default = 0x00000000, - regk_marb_foo_rw_dma2_burst_default = 0x00000000, - regk_marb_foo_rw_dma3_burst_default = 0x00000000, - regk_marb_foo_rw_dma4_burst_default = 0x00000000, - regk_marb_foo_rw_dma5_burst_default = 0x00000000, - regk_marb_foo_rw_dma6_burst_default = 0x00000000, - regk_marb_foo_rw_dma7_burst_default = 0x00000000, - regk_marb_foo_rw_dma9_burst_default = 0x00000000, - regk_marb_foo_rw_intm_slots_default = 0x00000000, - regk_marb_foo_rw_intm_slots_size = 0x00000040, - regk_marb_foo_rw_intr_mask_default = 0x00000000, - regk_marb_foo_rw_iop_burst_default = 0x00000000, - regk_marb_foo_rw_l2_slots_default = 0x00000000, - regk_marb_foo_rw_l2_slots_size = 0x00000040, - regk_marb_foo_rw_no_snoop_default = 0x00000000, - regk_marb_foo_rw_no_snoop_rq_default = 0x00000000, - regk_marb_foo_rw_regs_slots_default = 0x00000000, - regk_marb_foo_rw_regs_slots_size = 0x00000004, - regk_marb_foo_rw_sclr_burst_default = 0x00000000, - regk_marb_foo_rw_stop_mask_default = 0x00000000, - regk_marb_foo_sclr = 0x00000000, - regk_marb_foo_yes = 0x00000001 -}; -#endif /* __marb_foo_defs_h */ -#ifndef __marb_foo_bp_defs_h -#define __marb_foo_bp_defs_h - -/* - * This file is autogenerated from - * file: marb_foo.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile marb_foo_defs.h marb_foo.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope marb_foo_bp */ - -/* Register rw_first_addr, scope marb_foo_bp, type rw */ -typedef unsigned int reg_marb_foo_bp_rw_first_addr; -#define REG_RD_ADDR_marb_foo_bp_rw_first_addr 0 -#define REG_WR_ADDR_marb_foo_bp_rw_first_addr 0 - -/* Register rw_last_addr, scope marb_foo_bp, type rw */ -typedef unsigned int reg_marb_foo_bp_rw_last_addr; -#define REG_RD_ADDR_marb_foo_bp_rw_last_addr 4 -#define REG_WR_ADDR_marb_foo_bp_rw_last_addr 4 - -/* Register rw_op, scope marb_foo_bp, type rw */ -typedef struct { - unsigned int rd : 1; - unsigned int wr : 1; - unsigned int rd_excl : 1; - unsigned int pri_wr : 1; - unsigned int us_rd : 1; - unsigned int us_wr : 1; - unsigned int us_rd_excl : 1; - unsigned int us_pri_wr : 1; - unsigned int dummy1 : 24; -} reg_marb_foo_bp_rw_op; -#define REG_RD_ADDR_marb_foo_bp_rw_op 8 -#define REG_WR_ADDR_marb_foo_bp_rw_op 8 - -/* Register rw_clients, scope marb_foo_bp, type rw */ -typedef struct { - unsigned int sclr : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma9 : 1; - unsigned int dma11 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int ccdstat : 1; - unsigned int dummy1 : 17; -} reg_marb_foo_bp_rw_clients; -#define REG_RD_ADDR_marb_foo_bp_rw_clients 12 -#define REG_WR_ADDR_marb_foo_bp_rw_clients 12 - -/* Register rw_options, scope marb_foo_bp, type rw */ -typedef struct { - unsigned int wrap : 1; - unsigned int dummy1 : 31; -} reg_marb_foo_bp_rw_options; -#define REG_RD_ADDR_marb_foo_bp_rw_options 16 -#define REG_WR_ADDR_marb_foo_bp_rw_options 16 - -/* Register r_brk_addr, scope marb_foo_bp, type r */ -typedef unsigned int reg_marb_foo_bp_r_brk_addr; -#define REG_RD_ADDR_marb_foo_bp_r_brk_addr 20 - -/* Register r_brk_op, scope marb_foo_bp, type r */ -typedef struct { - unsigned int rd : 1; - unsigned int wr : 1; - unsigned int rd_excl : 1; - unsigned int pri_wr : 1; - unsigned int us_rd : 1; - unsigned int us_wr : 1; - unsigned int us_rd_excl : 1; - unsigned int us_pri_wr : 1; - unsigned int dummy1 : 24; -} reg_marb_foo_bp_r_brk_op; -#define REG_RD_ADDR_marb_foo_bp_r_brk_op 24 - -/* Register r_brk_clients, scope marb_foo_bp, type r */ -typedef struct { - unsigned int sclr : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma9 : 1; - unsigned int dma11 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int ccdstat : 1; - unsigned int dummy1 : 17; -} reg_marb_foo_bp_r_brk_clients; -#define REG_RD_ADDR_marb_foo_bp_r_brk_clients 28 - -/* Register r_brk_first_client, scope marb_foo_bp, type r */ -typedef struct { - unsigned int sclr : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma9 : 1; - unsigned int dma11 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int ccdstat : 1; - unsigned int dummy1 : 17; -} reg_marb_foo_bp_r_brk_first_client; -#define REG_RD_ADDR_marb_foo_bp_r_brk_first_client 32 - -/* Register r_brk_size, scope marb_foo_bp, type r */ -typedef unsigned int reg_marb_foo_bp_r_brk_size; -#define REG_RD_ADDR_marb_foo_bp_r_brk_size 36 - -/* Register rw_ack, scope marb_foo_bp, type rw */ -typedef unsigned int reg_marb_foo_bp_rw_ack; -#define REG_RD_ADDR_marb_foo_bp_rw_ack 40 -#define REG_WR_ADDR_marb_foo_bp_rw_ack 40 - - -/* Constants */ -enum { - regk_marb_foo_bp_no = 0x00000000, - regk_marb_foo_bp_rw_op_default = 0x00000000, - regk_marb_foo_bp_rw_options_default = 0x00000000, - regk_marb_foo_bp_yes = 0x00000001 -}; -#endif /* __marb_foo_bp_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/pinmux_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/pinmux_defs.h deleted file mode 100644 index 4b96cd2cba8a..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/pinmux_defs.h +++ /dev/null @@ -1,312 +0,0 @@ -#ifndef __pinmux_defs_h -#define __pinmux_defs_h - -/* - * This file is autogenerated from - * file: pinmux.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile pinmux_defs.h pinmux.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope pinmux */ - -/* Register rw_hwprot, scope pinmux, type rw */ -typedef struct { - unsigned int eth : 1; - unsigned int eth_mdio : 1; - unsigned int geth : 1; - unsigned int tg : 1; - unsigned int tg_clk : 1; - unsigned int vout : 1; - unsigned int vout_sync : 1; - unsigned int ser1 : 1; - unsigned int ser2 : 1; - unsigned int ser3 : 1; - unsigned int ser4 : 1; - unsigned int sser : 1; - unsigned int pwm0 : 1; - unsigned int pwm1 : 1; - unsigned int pwm2 : 1; - unsigned int timer0 : 1; - unsigned int timer1 : 1; - unsigned int pio : 1; - unsigned int i2c0 : 1; - unsigned int i2c1 : 1; - unsigned int i2c1_sda1 : 1; - unsigned int i2c1_sda2 : 1; - unsigned int i2c1_sda3 : 1; - unsigned int i2c1_sen : 1; - unsigned int dummy1 : 8; -} reg_pinmux_rw_hwprot; -#define REG_RD_ADDR_pinmux_rw_hwprot 0 -#define REG_WR_ADDR_pinmux_rw_hwprot 0 - -/* Register rw_gio_pa, scope pinmux, type rw */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int pa8 : 1; - unsigned int pa9 : 1; - unsigned int pa10 : 1; - unsigned int pa11 : 1; - unsigned int pa12 : 1; - unsigned int pa13 : 1; - unsigned int pa14 : 1; - unsigned int pa15 : 1; - unsigned int pa16 : 1; - unsigned int pa17 : 1; - unsigned int pa18 : 1; - unsigned int pa19 : 1; - unsigned int pa20 : 1; - unsigned int pa21 : 1; - unsigned int pa22 : 1; - unsigned int pa23 : 1; - unsigned int pa24 : 1; - unsigned int pa25 : 1; - unsigned int pa26 : 1; - unsigned int pa27 : 1; - unsigned int pa28 : 1; - unsigned int pa29 : 1; - unsigned int pa30 : 1; - unsigned int pa31 : 1; -} reg_pinmux_rw_gio_pa; -#define REG_RD_ADDR_pinmux_rw_gio_pa 4 -#define REG_WR_ADDR_pinmux_rw_gio_pa 4 - -/* Register rw_gio_pb, scope pinmux, type rw */ -typedef struct { - unsigned int pb0 : 1; - unsigned int pb1 : 1; - unsigned int pb2 : 1; - unsigned int pb3 : 1; - unsigned int pb4 : 1; - unsigned int pb5 : 1; - unsigned int pb6 : 1; - unsigned int pb7 : 1; - unsigned int pb8 : 1; - unsigned int pb9 : 1; - unsigned int pb10 : 1; - unsigned int pb11 : 1; - unsigned int pb12 : 1; - unsigned int pb13 : 1; - unsigned int pb14 : 1; - unsigned int pb15 : 1; - unsigned int pb16 : 1; - unsigned int pb17 : 1; - unsigned int pb18 : 1; - unsigned int pb19 : 1; - unsigned int pb20 : 1; - unsigned int pb21 : 1; - unsigned int pb22 : 1; - unsigned int pb23 : 1; - unsigned int pb24 : 1; - unsigned int pb25 : 1; - unsigned int pb26 : 1; - unsigned int pb27 : 1; - unsigned int pb28 : 1; - unsigned int pb29 : 1; - unsigned int pb30 : 1; - unsigned int pb31 : 1; -} reg_pinmux_rw_gio_pb; -#define REG_RD_ADDR_pinmux_rw_gio_pb 8 -#define REG_WR_ADDR_pinmux_rw_gio_pb 8 - -/* Register rw_gio_pc, scope pinmux, type rw */ -typedef struct { - unsigned int pc0 : 1; - unsigned int pc1 : 1; - unsigned int pc2 : 1; - unsigned int pc3 : 1; - unsigned int pc4 : 1; - unsigned int pc5 : 1; - unsigned int pc6 : 1; - unsigned int pc7 : 1; - unsigned int pc8 : 1; - unsigned int pc9 : 1; - unsigned int pc10 : 1; - unsigned int pc11 : 1; - unsigned int pc12 : 1; - unsigned int pc13 : 1; - unsigned int pc14 : 1; - unsigned int pc15 : 1; - unsigned int dummy1 : 16; -} reg_pinmux_rw_gio_pc; -#define REG_RD_ADDR_pinmux_rw_gio_pc 12 -#define REG_WR_ADDR_pinmux_rw_gio_pc 12 - -/* Register rw_iop_pa, scope pinmux, type rw */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int pa8 : 1; - unsigned int pa9 : 1; - unsigned int pa10 : 1; - unsigned int pa11 : 1; - unsigned int pa12 : 1; - unsigned int pa13 : 1; - unsigned int pa14 : 1; - unsigned int pa15 : 1; - unsigned int pa16 : 1; - unsigned int pa17 : 1; - unsigned int pa18 : 1; - unsigned int pa19 : 1; - unsigned int pa20 : 1; - unsigned int pa21 : 1; - unsigned int pa22 : 1; - unsigned int pa23 : 1; - unsigned int pa24 : 1; - unsigned int pa25 : 1; - unsigned int pa26 : 1; - unsigned int pa27 : 1; - unsigned int pa28 : 1; - unsigned int pa29 : 1; - unsigned int pa30 : 1; - unsigned int pa31 : 1; -} reg_pinmux_rw_iop_pa; -#define REG_RD_ADDR_pinmux_rw_iop_pa 16 -#define REG_WR_ADDR_pinmux_rw_iop_pa 16 - -/* Register rw_iop_pb, scope pinmux, type rw */ -typedef struct { - unsigned int pb0 : 1; - unsigned int pb1 : 1; - unsigned int pb2 : 1; - unsigned int pb3 : 1; - unsigned int pb4 : 1; - unsigned int pb5 : 1; - unsigned int pb6 : 1; - unsigned int pb7 : 1; - unsigned int dummy1 : 24; -} reg_pinmux_rw_iop_pb; -#define REG_RD_ADDR_pinmux_rw_iop_pb 20 -#define REG_WR_ADDR_pinmux_rw_iop_pb 20 - -/* Register rw_iop_pio, scope pinmux, type rw */ -typedef struct { - unsigned int d0 : 1; - unsigned int d1 : 1; - unsigned int d2 : 1; - unsigned int d3 : 1; - unsigned int d4 : 1; - unsigned int d5 : 1; - unsigned int d6 : 1; - unsigned int d7 : 1; - unsigned int rd_n : 1; - unsigned int wr_n : 1; - unsigned int a0 : 1; - unsigned int a1 : 1; - unsigned int ce0_n : 1; - unsigned int ce1_n : 1; - unsigned int ce2_n : 1; - unsigned int rdy : 1; - unsigned int dummy1 : 16; -} reg_pinmux_rw_iop_pio; -#define REG_RD_ADDR_pinmux_rw_iop_pio 24 -#define REG_WR_ADDR_pinmux_rw_iop_pio 24 - -/* Register rw_iop_usb, scope pinmux, type rw */ -typedef struct { - unsigned int usb0 : 1; - unsigned int dummy1 : 31; -} reg_pinmux_rw_iop_usb; -#define REG_RD_ADDR_pinmux_rw_iop_usb 28 -#define REG_WR_ADDR_pinmux_rw_iop_usb 28 - - -/* Constants */ -enum { - regk_pinmux_no = 0x00000000, - regk_pinmux_rw_gio_pa_default = 0x00000000, - regk_pinmux_rw_gio_pb_default = 0x00000000, - regk_pinmux_rw_gio_pc_default = 0x00000000, - regk_pinmux_rw_hwprot_default = 0x00000000, - regk_pinmux_rw_iop_pa_default = 0x00000000, - regk_pinmux_rw_iop_pb_default = 0x00000000, - regk_pinmux_rw_iop_pio_default = 0x00000000, - regk_pinmux_rw_iop_usb_default = 0x00000001, - regk_pinmux_yes = 0x00000001 -}; -#endif /* __pinmux_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/pio_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/pio_defs.h deleted file mode 100644 index 2d8e4b4cc602..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/pio_defs.h +++ /dev/null @@ -1,371 +0,0 @@ -#ifndef __pio_defs_h -#define __pio_defs_h - -/* - * This file is autogenerated from - * file: pio.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile pio_defs.h pio.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope pio */ - -/* Register rw_data, scope pio, type rw */ -typedef unsigned int reg_pio_rw_data; -#define REG_RD_ADDR_pio_rw_data 64 -#define REG_WR_ADDR_pio_rw_data 64 - -/* Register rw_io_access0, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access0; -#define REG_RD_ADDR_pio_rw_io_access0 0 -#define REG_WR_ADDR_pio_rw_io_access0 0 - -/* Register rw_io_access1, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access1; -#define REG_RD_ADDR_pio_rw_io_access1 4 -#define REG_WR_ADDR_pio_rw_io_access1 4 - -/* Register rw_io_access2, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access2; -#define REG_RD_ADDR_pio_rw_io_access2 8 -#define REG_WR_ADDR_pio_rw_io_access2 8 - -/* Register rw_io_access3, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access3; -#define REG_RD_ADDR_pio_rw_io_access3 12 -#define REG_WR_ADDR_pio_rw_io_access3 12 - -/* Register rw_io_access4, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access4; -#define REG_RD_ADDR_pio_rw_io_access4 16 -#define REG_WR_ADDR_pio_rw_io_access4 16 - -/* Register rw_io_access5, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access5; -#define REG_RD_ADDR_pio_rw_io_access5 20 -#define REG_WR_ADDR_pio_rw_io_access5 20 - -/* Register rw_io_access6, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access6; -#define REG_RD_ADDR_pio_rw_io_access6 24 -#define REG_WR_ADDR_pio_rw_io_access6 24 - -/* Register rw_io_access7, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access7; -#define REG_RD_ADDR_pio_rw_io_access7 28 -#define REG_WR_ADDR_pio_rw_io_access7 28 - -/* Register rw_io_access8, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access8; -#define REG_RD_ADDR_pio_rw_io_access8 32 -#define REG_WR_ADDR_pio_rw_io_access8 32 - -/* Register rw_io_access9, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access9; -#define REG_RD_ADDR_pio_rw_io_access9 36 -#define REG_WR_ADDR_pio_rw_io_access9 36 - -/* Register rw_io_access10, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access10; -#define REG_RD_ADDR_pio_rw_io_access10 40 -#define REG_WR_ADDR_pio_rw_io_access10 40 - -/* Register rw_io_access11, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access11; -#define REG_RD_ADDR_pio_rw_io_access11 44 -#define REG_WR_ADDR_pio_rw_io_access11 44 - -/* Register rw_io_access12, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access12; -#define REG_RD_ADDR_pio_rw_io_access12 48 -#define REG_WR_ADDR_pio_rw_io_access12 48 - -/* Register rw_io_access13, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access13; -#define REG_RD_ADDR_pio_rw_io_access13 52 -#define REG_WR_ADDR_pio_rw_io_access13 52 - -/* Register rw_io_access14, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access14; -#define REG_RD_ADDR_pio_rw_io_access14 56 -#define REG_WR_ADDR_pio_rw_io_access14 56 - -/* Register rw_io_access15, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_pio_rw_io_access15; -#define REG_RD_ADDR_pio_rw_io_access15 60 -#define REG_WR_ADDR_pio_rw_io_access15 60 - -/* Register rw_ce0_cfg, scope pio, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int mode : 2; - unsigned int dummy1 : 16; -} reg_pio_rw_ce0_cfg; -#define REG_RD_ADDR_pio_rw_ce0_cfg 68 -#define REG_WR_ADDR_pio_rw_ce0_cfg 68 - -/* Register rw_ce1_cfg, scope pio, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int mode : 2; - unsigned int dummy1 : 16; -} reg_pio_rw_ce1_cfg; -#define REG_RD_ADDR_pio_rw_ce1_cfg 72 -#define REG_WR_ADDR_pio_rw_ce1_cfg 72 - -/* Register rw_ce2_cfg, scope pio, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int mode : 2; - unsigned int dummy1 : 16; -} reg_pio_rw_ce2_cfg; -#define REG_RD_ADDR_pio_rw_ce2_cfg 76 -#define REG_WR_ADDR_pio_rw_ce2_cfg 76 - -/* Register rw_dout, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int rd_n : 1; - unsigned int wr_n : 1; - unsigned int a0 : 1; - unsigned int a1 : 1; - unsigned int ce0_n : 1; - unsigned int ce1_n : 1; - unsigned int ce2_n : 1; - unsigned int rdy : 1; - unsigned int dummy1 : 16; -} reg_pio_rw_dout; -#define REG_RD_ADDR_pio_rw_dout 80 -#define REG_WR_ADDR_pio_rw_dout 80 - -/* Register rw_oe, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int rd_n : 1; - unsigned int wr_n : 1; - unsigned int a0 : 1; - unsigned int a1 : 1; - unsigned int ce0_n : 1; - unsigned int ce1_n : 1; - unsigned int ce2_n : 1; - unsigned int rdy : 1; - unsigned int dummy1 : 16; -} reg_pio_rw_oe; -#define REG_RD_ADDR_pio_rw_oe 84 -#define REG_WR_ADDR_pio_rw_oe 84 - -/* Register rw_man_ctrl, scope pio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int rd_n : 1; - unsigned int wr_n : 1; - unsigned int a0 : 1; - unsigned int a1 : 1; - unsigned int ce0_n : 1; - unsigned int ce1_n : 1; - unsigned int ce2_n : 1; - unsigned int rdy : 1; - unsigned int dummy1 : 16; -} reg_pio_rw_man_ctrl; -#define REG_RD_ADDR_pio_rw_man_ctrl 88 -#define REG_WR_ADDR_pio_rw_man_ctrl 88 - -/* Register r_din, scope pio, type r */ -typedef struct { - unsigned int data : 8; - unsigned int rd_n : 1; - unsigned int wr_n : 1; - unsigned int a0 : 1; - unsigned int a1 : 1; - unsigned int ce0_n : 1; - unsigned int ce1_n : 1; - unsigned int ce2_n : 1; - unsigned int rdy : 1; - unsigned int dummy1 : 16; -} reg_pio_r_din; -#define REG_RD_ADDR_pio_r_din 92 - -/* Register r_stat, scope pio, type r */ -typedef struct { - unsigned int busy : 1; - unsigned int dummy1 : 31; -} reg_pio_r_stat; -#define REG_RD_ADDR_pio_r_stat 96 - -/* Register rw_intr_mask, scope pio, type rw */ -typedef struct { - unsigned int rdy : 1; - unsigned int dummy1 : 31; -} reg_pio_rw_intr_mask; -#define REG_RD_ADDR_pio_rw_intr_mask 100 -#define REG_WR_ADDR_pio_rw_intr_mask 100 - -/* Register rw_ack_intr, scope pio, type rw */ -typedef struct { - unsigned int rdy : 1; - unsigned int dummy1 : 31; -} reg_pio_rw_ack_intr; -#define REG_RD_ADDR_pio_rw_ack_intr 104 -#define REG_WR_ADDR_pio_rw_ack_intr 104 - -/* Register r_intr, scope pio, type r */ -typedef struct { - unsigned int rdy : 1; - unsigned int dummy1 : 31; -} reg_pio_r_intr; -#define REG_RD_ADDR_pio_r_intr 108 - -/* Register r_masked_intr, scope pio, type r */ -typedef struct { - unsigned int rdy : 1; - unsigned int dummy1 : 31; -} reg_pio_r_masked_intr; -#define REG_RD_ADDR_pio_r_masked_intr 112 - - -/* Constants */ -enum { - regk_pio_a2 = 0x00000003, - regk_pio_no = 0x00000000, - regk_pio_normal = 0x00000000, - regk_pio_rd = 0x00000001, - regk_pio_rw_ce0_cfg_default = 0x00000000, - regk_pio_rw_ce1_cfg_default = 0x00000000, - regk_pio_rw_ce2_cfg_default = 0x00000000, - regk_pio_rw_intr_mask_default = 0x00000000, - regk_pio_rw_man_ctrl_default = 0x00000000, - regk_pio_rw_oe_default = 0x00000000, - regk_pio_wr = 0x00000002, - regk_pio_wr_ce2 = 0x00000003, - regk_pio_yes = 0x00000001, - regk_pio_yes_all = 0x000000ff -}; -#endif /* __pio_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/reg_map.h b/include/asm-cris/arch-v32/mach-a3/hwregs/reg_map.h deleted file mode 100644 index 36e59d6e96b6..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/reg_map.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef __reg_map_h -#define __reg_map_h - -/* - * This file is autogenerated from - * file: reg.rmap - * - * by ../../../tools/rdesc/bin/rdes2c -base 0xb0000000 -map marb_bar.r marb_foo.r ccd_top.r ccd_stat.r ccd_tg.r ccd_dp.r ccd.r iop_sap_in.r iop_sap_out.r iop_sw_cfg.r iop_sw_cpu.r iop_sw_mpu.r iop_sw_spu.r iop_version.r iop_crc_par.r iop_dmc_in.r iop_dmc_out.r iop_fifo_in_extra.r iop_fifo_in.r iop_fifo_out_extra.r iop_fifo_out.r iop_mc.r iop_mpu.r iop_scrc_in.r iop_scrc_out.r iop_spu.r iop_timer_grp.r iop_trigger_grp.r iop.r -outfile reg_map.h reg.rmap - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -typedef enum { - regi_ccd = 0xb0000000, - regi_ccd_top = 0xb0000000, - regi_ccd_dp = 0xb0000400, - regi_ccd_stat = 0xb0000800, - regi_ccd_tg = 0xb0001000, - regi_cfg = 0xb0002000, - regi_clkgen = 0xb0004000, - regi_ddr2_ctrl = 0xb0006000, - regi_dma0 = 0xb0008000, - regi_dma1 = 0xb000a000, - regi_dma11 = 0xb000c000, - regi_dma2 = 0xb000e000, - regi_dma3 = 0xb0010000, - regi_dma4 = 0xb0012000, - regi_dma5 = 0xb0014000, - regi_dma6 = 0xb0016000, - regi_dma7 = 0xb0018000, - regi_dma9 = 0xb001a000, - regi_eth = 0xb001c000, - regi_gio = 0xb0020000, - regi_h264 = 0xb0022000, - regi_hist = 0xb0026000, - regi_iop = 0xb0028000, - regi_iop_version = 0xb0028000, - regi_iop_fifo_in_extra = 0xb0028040, - regi_iop_fifo_out_extra = 0xb0028080, - regi_iop_trigger_grp0 = 0xb00280c0, - regi_iop_trigger_grp1 = 0xb0028100, - regi_iop_trigger_grp2 = 0xb0028140, - regi_iop_trigger_grp3 = 0xb0028180, - regi_iop_trigger_grp4 = 0xb00281c0, - regi_iop_trigger_grp5 = 0xb0028200, - regi_iop_trigger_grp6 = 0xb0028240, - regi_iop_trigger_grp7 = 0xb0028280, - regi_iop_crc_par = 0xb0028300, - regi_iop_dmc_in = 0xb0028380, - regi_iop_dmc_out = 0xb0028400, - regi_iop_fifo_in = 0xb0028480, - regi_iop_fifo_out = 0xb0028500, - regi_iop_scrc_in = 0xb0028580, - regi_iop_scrc_out = 0xb0028600, - regi_iop_timer_grp0 = 0xb0028680, - regi_iop_timer_grp1 = 0xb0028700, - regi_iop_sap_in = 0xb0028800, - regi_iop_sap_out = 0xb0028900, - regi_iop_spu = 0xb0028a00, - regi_iop_sw_cfg = 0xb0028b00, - regi_iop_sw_cpu = 0xb0028c00, - regi_iop_sw_mpu = 0xb0028d00, - regi_iop_sw_spu = 0xb0028e00, - regi_iop_mpu = 0xb0029000, - regi_irq = 0xb002a000, - regi_irq2 = 0xb006a000, - regi_jpeg = 0xb002c000, - regi_l2cache = 0xb0030000, - regi_marb_bar = 0xb0032000, - regi_marb_bar_bp0 = 0xb0032140, - regi_marb_bar_bp1 = 0xb0032180, - regi_marb_bar_bp2 = 0xb00321c0, - regi_marb_bar_bp3 = 0xb0032200, - regi_marb_foo = 0xb0034000, - regi_marb_foo_bp0 = 0xb0034280, - regi_marb_foo_bp1 = 0xb00342c0, - regi_marb_foo_bp2 = 0xb0034300, - regi_marb_foo_bp3 = 0xb0034340, - regi_pinmux = 0xb0038000, - regi_pio = 0xb0036000, - regi_sclr = 0xb003a000, - regi_sclr_fifo = 0xb003c000, - regi_ser0 = 0xb003e000, - regi_ser1 = 0xb0040000, - regi_ser2 = 0xb0042000, - regi_ser3 = 0xb0044000, - regi_ser4 = 0xb0046000, - regi_sser = 0xb0048000, - regi_strcop = 0xb004a000, - regi_strdma0 = 0xb004e000, - regi_strdma1 = 0xb0050000, - regi_strdma2 = 0xb0052000, - regi_strdma3 = 0xb0054000, - regi_strdma5 = 0xb0056000, - regi_strmux = 0xb004c000, - regi_timer0 = 0xb0058000, - regi_timer1 = 0xb005a000, - regi_timer2 = 0xb006e000, - regi_trace = 0xb005c000, - regi_vin = 0xb005e000, - regi_vout = 0xb0060000 -} reg_scope_instances; -#endif /* __reg_map_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/strmux_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/strmux_defs.h deleted file mode 100644 index 14f718a4ecc3..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/strmux_defs.h +++ /dev/null @@ -1,120 +0,0 @@ -#ifndef __strmux_defs_h -#define __strmux_defs_h - -/* - * This file is autogenerated from - * file: strmux.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile strmux_defs.h strmux.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope strmux */ - -/* Register rw_cfg, scope strmux, type rw */ -typedef struct { - unsigned int dma0 : 2; - unsigned int dma1 : 2; - unsigned int dma2 : 2; - unsigned int dma3 : 2; - unsigned int dma4 : 2; - unsigned int dma5 : 2; - unsigned int dma6 : 2; - unsigned int dma7 : 2; - unsigned int dummy1 : 2; - unsigned int dma9 : 2; - unsigned int dummy2 : 2; - unsigned int dma11 : 2; - unsigned int dummy3 : 8; -} reg_strmux_rw_cfg; -#define REG_RD_ADDR_strmux_rw_cfg 0 -#define REG_WR_ADDR_strmux_rw_cfg 0 - - -/* Constants */ -enum { - regk_strmux_eth = 0x00000001, - regk_strmux_h264 = 0x00000001, - regk_strmux_iop = 0x00000001, - regk_strmux_jpeg = 0x00000001, - regk_strmux_off = 0x00000000, - regk_strmux_rw_cfg_default = 0x00000000, - regk_strmux_ser0 = 0x00000002, - regk_strmux_ser1 = 0x00000002, - regk_strmux_ser2 = 0x00000002, - regk_strmux_ser3 = 0x00000002, - regk_strmux_ser4 = 0x00000002, - regk_strmux_sser = 0x00000001, - regk_strmux_strcop = 0x00000001 -}; -#endif /* __strmux_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/hwregs/timer_defs.h b/include/asm-cris/arch-v32/mach-a3/hwregs/timer_defs.h deleted file mode 100644 index 2c33e097d60a..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/hwregs/timer_defs.h +++ /dev/null @@ -1,265 +0,0 @@ -#ifndef __timer_defs_h -#define __timer_defs_h - -/* - * This file is autogenerated from - * file: timer.r - * - * by ../../../tools/rdesc/bin/rdes2c -outfile timer_defs.h timer.r - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope timer */ - -/* Register rw_tmr0_div, scope timer, type rw */ -typedef unsigned int reg_timer_rw_tmr0_div; -#define REG_RD_ADDR_timer_rw_tmr0_div 0 -#define REG_WR_ADDR_timer_rw_tmr0_div 0 - -/* Register r_tmr0_data, scope timer, type r */ -typedef unsigned int reg_timer_r_tmr0_data; -#define REG_RD_ADDR_timer_r_tmr0_data 4 - -/* Register rw_tmr0_ctrl, scope timer, type rw */ -typedef struct { - unsigned int op : 2; - unsigned int freq : 3; - unsigned int dummy1 : 27; -} reg_timer_rw_tmr0_ctrl; -#define REG_RD_ADDR_timer_rw_tmr0_ctrl 8 -#define REG_WR_ADDR_timer_rw_tmr0_ctrl 8 - -/* Register rw_tmr1_div, scope timer, type rw */ -typedef unsigned int reg_timer_rw_tmr1_div; -#define REG_RD_ADDR_timer_rw_tmr1_div 16 -#define REG_WR_ADDR_timer_rw_tmr1_div 16 - -/* Register r_tmr1_data, scope timer, type r */ -typedef unsigned int reg_timer_r_tmr1_data; -#define REG_RD_ADDR_timer_r_tmr1_data 20 - -/* Register rw_tmr1_ctrl, scope timer, type rw */ -typedef struct { - unsigned int op : 2; - unsigned int freq : 3; - unsigned int dummy1 : 27; -} reg_timer_rw_tmr1_ctrl; -#define REG_RD_ADDR_timer_rw_tmr1_ctrl 24 -#define REG_WR_ADDR_timer_rw_tmr1_ctrl 24 - -/* Register rs_cnt_data, scope timer, type rs */ -typedef struct { - unsigned int tmr : 24; - unsigned int cnt : 8; -} reg_timer_rs_cnt_data; -#define REG_RD_ADDR_timer_rs_cnt_data 32 - -/* Register r_cnt_data, scope timer, type r */ -typedef struct { - unsigned int tmr : 24; - unsigned int cnt : 8; -} reg_timer_r_cnt_data; -#define REG_RD_ADDR_timer_r_cnt_data 36 - -/* Register rw_cnt_cfg, scope timer, type rw */ -typedef struct { - unsigned int clk : 2; - unsigned int dummy1 : 30; -} reg_timer_rw_cnt_cfg; -#define REG_RD_ADDR_timer_rw_cnt_cfg 40 -#define REG_WR_ADDR_timer_rw_cnt_cfg 40 - -/* Register rw_trig, scope timer, type rw */ -typedef unsigned int reg_timer_rw_trig; -#define REG_RD_ADDR_timer_rw_trig 48 -#define REG_WR_ADDR_timer_rw_trig 48 - -/* Register rw_trig_cfg, scope timer, type rw */ -typedef struct { - unsigned int tmr : 2; - unsigned int dummy1 : 30; -} reg_timer_rw_trig_cfg; -#define REG_RD_ADDR_timer_rw_trig_cfg 52 -#define REG_WR_ADDR_timer_rw_trig_cfg 52 - -/* Register r_time, scope timer, type r */ -typedef unsigned int reg_timer_r_time; -#define REG_RD_ADDR_timer_r_time 56 - -/* Register rw_out, scope timer, type rw */ -typedef struct { - unsigned int tmr : 2; - unsigned int dummy1 : 30; -} reg_timer_rw_out; -#define REG_RD_ADDR_timer_rw_out 60 -#define REG_WR_ADDR_timer_rw_out 60 - -/* Register rw_wd_ctrl, scope timer, type rw */ -typedef struct { - unsigned int cnt : 8; - unsigned int cmd : 1; - unsigned int key : 7; - unsigned int dummy1 : 16; -} reg_timer_rw_wd_ctrl; -#define REG_RD_ADDR_timer_rw_wd_ctrl 64 -#define REG_WR_ADDR_timer_rw_wd_ctrl 64 - -/* Register r_wd_stat, scope timer, type r */ -typedef struct { - unsigned int cnt : 8; - unsigned int cmd : 1; - unsigned int dummy1 : 23; -} reg_timer_r_wd_stat; -#define REG_RD_ADDR_timer_r_wd_stat 68 - -/* Register rw_intr_mask, scope timer, type rw */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int cnt : 1; - unsigned int trig : 1; - unsigned int dummy1 : 28; -} reg_timer_rw_intr_mask; -#define REG_RD_ADDR_timer_rw_intr_mask 72 -#define REG_WR_ADDR_timer_rw_intr_mask 72 - -/* Register rw_ack_intr, scope timer, type rw */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int cnt : 1; - unsigned int trig : 1; - unsigned int dummy1 : 28; -} reg_timer_rw_ack_intr; -#define REG_RD_ADDR_timer_rw_ack_intr 76 -#define REG_WR_ADDR_timer_rw_ack_intr 76 - -/* Register r_intr, scope timer, type r */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int cnt : 1; - unsigned int trig : 1; - unsigned int dummy1 : 28; -} reg_timer_r_intr; -#define REG_RD_ADDR_timer_r_intr 80 - -/* Register r_masked_intr, scope timer, type r */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int cnt : 1; - unsigned int trig : 1; - unsigned int dummy1 : 28; -} reg_timer_r_masked_intr; -#define REG_RD_ADDR_timer_r_masked_intr 84 - -/* Register rw_test, scope timer, type rw */ -typedef struct { - unsigned int dis : 1; - unsigned int en : 1; - unsigned int dummy1 : 30; -} reg_timer_rw_test; -#define REG_RD_ADDR_timer_rw_test 88 -#define REG_WR_ADDR_timer_rw_test 88 - - -/* Constants */ -enum { - regk_timer_ext = 0x00000001, - regk_timer_f100 = 0x00000007, - regk_timer_f29_493 = 0x00000004, - regk_timer_f32 = 0x00000005, - regk_timer_f32_768 = 0x00000006, - regk_timer_f90 = 0x00000003, - regk_timer_hold = 0x00000001, - regk_timer_ld = 0x00000000, - regk_timer_no = 0x00000000, - regk_timer_off = 0x00000000, - regk_timer_run = 0x00000002, - regk_timer_rw_cnt_cfg_default = 0x00000000, - regk_timer_rw_intr_mask_default = 0x00000000, - regk_timer_rw_out_default = 0x00000000, - regk_timer_rw_test_default = 0x00000000, - regk_timer_rw_tmr0_ctrl_default = 0x00000000, - regk_timer_rw_tmr1_ctrl_default = 0x00000000, - regk_timer_rw_trig_cfg_default = 0x00000000, - regk_timer_start = 0x00000001, - regk_timer_stop = 0x00000000, - regk_timer_time = 0x00000001, - regk_timer_tmr0 = 0x00000002, - regk_timer_tmr1 = 0x00000003, - regk_timer_vclk = 0x00000002, - regk_timer_yes = 0x00000001 -}; -#endif /* __timer_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-a3/memmap.h b/include/asm-cris/arch-v32/mach-a3/memmap.h deleted file mode 100644 index 7e15c9eb4e49..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/memmap.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_ARCH_MEMMAP_H -#define _ASM_ARCH_MEMMAP_H - -#define MEM_INTMEM_START (0x38000000) -#define MEM_INTMEM_SIZE (0x00018000) -#define MEM_DRAM_START (0x40000000) - -#define MEM_NON_CACHEABLE (0x80000000) - -#endif diff --git a/include/asm-cris/arch-v32/mach-a3/pinmux.h b/include/asm-cris/arch-v32/mach-a3/pinmux.h deleted file mode 100644 index db42a7254584..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/pinmux.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_PINMUX_H -#define _ASM_CRIS_ARCH_PINMUX_H - -#define PORT_A 0 -#define PORT_B 1 -#define PORT_C 2 - -enum pin_mode { - pinmux_none = 0, - pinmux_fixed, - pinmux_gpio, - pinmux_iop -}; - -enum fixed_function { - pinmux_eth, - pinmux_geth, - pinmux_tg_ccd, - pinmux_tg_cmos, - pinmux_vout, - pinmux_ser1, - pinmux_ser2, - pinmux_ser3, - pinmux_ser4, - pinmux_sser, - pinmux_pio, - pinmux_pwm0, - pinmux_pwm1, - pinmux_pwm2, - pinmux_i2c0, - pinmux_i2c1, - pinmux_i2c1_3wire, - pinmux_i2c1_sda1, - pinmux_i2c1_sda2, - pinmux_i2c1_sda3, -}; - -int crisv32_pinmux_init(void); -int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode); -int crisv32_pinmux_alloc_fixed(enum fixed_function function); -int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin); -int crisv32_pinmux_dealloc_fixed(enum fixed_function function); -void crisv32_pinmux_dump(void); - -#endif diff --git a/include/asm-cris/arch-v32/mach-a3/startup.inc b/include/asm-cris/arch-v32/mach-a3/startup.inc deleted file mode 100644 index 2f23e5e16f4a..000000000000 --- a/include/asm-cris/arch-v32/mach-a3/startup.inc +++ /dev/null @@ -1,60 +0,0 @@ -#include -#include -#include -#include -#include - - .macro GIO_INIT - move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PA_OE, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PB_OE, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pc_dout), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PC_OE, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pc_oe), $r1 - move.d $r0, [$r1] - - move.d 0xFFFFFFFF, $r0 - move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pa), $r1 - move.d $r0, [$r1] - move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1 - move.d $r0, [$r1] - move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pc), $r1 - move.d $r0, [$r1] - .endm - - .macro START_CLOCKS - move.d REG_ADDR(clkgen, regi_clkgen, rw_clk_ctrl), $r1 - move.d [$r1], $r0 - or.d REG_STATE(clkgen, rw_clk_ctrl, cpu, yes) | \ - REG_STATE(clkgen, rw_clk_ctrl, ddr2, yes) | \ - REG_STATE(clkgen, rw_clk_ctrl, memarb_bar_ddr, yes), $r0 - move.d $r0, [$r1] - .endm - - .macro SETUP_WAIT_STATES - move.d REG_ADDR(pio, regi_pio, rw_ce0_cfg), $r0 - move.d CONFIG_ETRAX_PIO_CE0_CFG, $r1 - move.d $r1, [$r0] - move.d REG_ADDR(pio, regi_pio, rw_ce1_cfg), $r0 - move.d CONFIG_ETRAX_PIO_CE1_CFG, $r1 - move.d $r1, [$r0] - move.d REG_ADDR(pio, regi_pio, rw_ce2_cfg), $r0 - move.d CONFIG_ETRAX_PIO_CE2_CFG, $r1 - move.d $r1, [$r0] - .endm diff --git a/include/asm-cris/arch-v32/mach-fs/arbiter.h b/include/asm-cris/arch-v32/mach-fs/arbiter.h deleted file mode 100644 index a2e0ec8faa7d..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/arbiter.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_ARBITER_H -#define _ASM_CRIS_ARCH_ARBITER_H - -#define EXT_REGION 0 -#define INT_REGION 1 - -typedef void (watch_callback)(void); - -enum { - arbiter_all_dmas = 0x3ff, - arbiter_cpu = 0xc00, - arbiter_all_clients = 0x3fff -}; - -enum { - arbiter_all_read = 0x55, - arbiter_all_write = 0xaa, - arbiter_all_accesses = 0xff -}; - -int crisv32_arbiter_allocate_bandwidth(int client, int region, - unsigned long bandwidth); -int crisv32_arbiter_watch(unsigned long start, unsigned long size, - unsigned long clients, unsigned long accesses, - watch_callback * cb); -int crisv32_arbiter_unwatch(int id); - -#endif diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/bif_core_defs_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/bif_core_defs_asm.h deleted file mode 100644 index 0a409c92837e..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/bif_core_defs_asm.h +++ /dev/null @@ -1,319 +0,0 @@ -#ifndef __bif_core_defs_asm_h -#define __bif_core_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_core_regs.r - * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp - * last modfied: Mon Apr 11 16:06:33 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_core_defs_asm.h ../../inst/bif/rtl/bif_core_regs.r - * id: $Id: bif_core_defs_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_grp1_cfg, scope bif_core, type rw */ -#define reg_bif_core_rw_grp1_cfg___lw___lsb 0 -#define reg_bif_core_rw_grp1_cfg___lw___width 6 -#define reg_bif_core_rw_grp1_cfg___ew___lsb 6 -#define reg_bif_core_rw_grp1_cfg___ew___width 3 -#define reg_bif_core_rw_grp1_cfg___zw___lsb 9 -#define reg_bif_core_rw_grp1_cfg___zw___width 3 -#define reg_bif_core_rw_grp1_cfg___aw___lsb 12 -#define reg_bif_core_rw_grp1_cfg___aw___width 2 -#define reg_bif_core_rw_grp1_cfg___dw___lsb 14 -#define reg_bif_core_rw_grp1_cfg___dw___width 2 -#define reg_bif_core_rw_grp1_cfg___ewb___lsb 16 -#define reg_bif_core_rw_grp1_cfg___ewb___width 2 -#define reg_bif_core_rw_grp1_cfg___bw___lsb 18 -#define reg_bif_core_rw_grp1_cfg___bw___width 1 -#define reg_bif_core_rw_grp1_cfg___bw___bit 18 -#define reg_bif_core_rw_grp1_cfg___wr_extend___lsb 19 -#define reg_bif_core_rw_grp1_cfg___wr_extend___width 1 -#define reg_bif_core_rw_grp1_cfg___wr_extend___bit 19 -#define reg_bif_core_rw_grp1_cfg___erc_en___lsb 20 -#define reg_bif_core_rw_grp1_cfg___erc_en___width 1 -#define reg_bif_core_rw_grp1_cfg___erc_en___bit 20 -#define reg_bif_core_rw_grp1_cfg___mode___lsb 21 -#define reg_bif_core_rw_grp1_cfg___mode___width 1 -#define reg_bif_core_rw_grp1_cfg___mode___bit 21 -#define reg_bif_core_rw_grp1_cfg_offset 0 - -/* Register rw_grp2_cfg, scope bif_core, type rw */ -#define reg_bif_core_rw_grp2_cfg___lw___lsb 0 -#define reg_bif_core_rw_grp2_cfg___lw___width 6 -#define reg_bif_core_rw_grp2_cfg___ew___lsb 6 -#define reg_bif_core_rw_grp2_cfg___ew___width 3 -#define reg_bif_core_rw_grp2_cfg___zw___lsb 9 -#define reg_bif_core_rw_grp2_cfg___zw___width 3 -#define reg_bif_core_rw_grp2_cfg___aw___lsb 12 -#define reg_bif_core_rw_grp2_cfg___aw___width 2 -#define reg_bif_core_rw_grp2_cfg___dw___lsb 14 -#define reg_bif_core_rw_grp2_cfg___dw___width 2 -#define reg_bif_core_rw_grp2_cfg___ewb___lsb 16 -#define reg_bif_core_rw_grp2_cfg___ewb___width 2 -#define reg_bif_core_rw_grp2_cfg___bw___lsb 18 -#define reg_bif_core_rw_grp2_cfg___bw___width 1 -#define reg_bif_core_rw_grp2_cfg___bw___bit 18 -#define reg_bif_core_rw_grp2_cfg___wr_extend___lsb 19 -#define reg_bif_core_rw_grp2_cfg___wr_extend___width 1 -#define reg_bif_core_rw_grp2_cfg___wr_extend___bit 19 -#define reg_bif_core_rw_grp2_cfg___erc_en___lsb 20 -#define reg_bif_core_rw_grp2_cfg___erc_en___width 1 -#define reg_bif_core_rw_grp2_cfg___erc_en___bit 20 -#define reg_bif_core_rw_grp2_cfg___mode___lsb 21 -#define reg_bif_core_rw_grp2_cfg___mode___width 1 -#define reg_bif_core_rw_grp2_cfg___mode___bit 21 -#define reg_bif_core_rw_grp2_cfg_offset 4 - -/* Register rw_grp3_cfg, scope bif_core, type rw */ -#define reg_bif_core_rw_grp3_cfg___lw___lsb 0 -#define reg_bif_core_rw_grp3_cfg___lw___width 6 -#define reg_bif_core_rw_grp3_cfg___ew___lsb 6 -#define reg_bif_core_rw_grp3_cfg___ew___width 3 -#define reg_bif_core_rw_grp3_cfg___zw___lsb 9 -#define reg_bif_core_rw_grp3_cfg___zw___width 3 -#define reg_bif_core_rw_grp3_cfg___aw___lsb 12 -#define reg_bif_core_rw_grp3_cfg___aw___width 2 -#define reg_bif_core_rw_grp3_cfg___dw___lsb 14 -#define reg_bif_core_rw_grp3_cfg___dw___width 2 -#define reg_bif_core_rw_grp3_cfg___ewb___lsb 16 -#define reg_bif_core_rw_grp3_cfg___ewb___width 2 -#define reg_bif_core_rw_grp3_cfg___bw___lsb 18 -#define reg_bif_core_rw_grp3_cfg___bw___width 1 -#define reg_bif_core_rw_grp3_cfg___bw___bit 18 -#define reg_bif_core_rw_grp3_cfg___wr_extend___lsb 19 -#define reg_bif_core_rw_grp3_cfg___wr_extend___width 1 -#define reg_bif_core_rw_grp3_cfg___wr_extend___bit 19 -#define reg_bif_core_rw_grp3_cfg___erc_en___lsb 20 -#define reg_bif_core_rw_grp3_cfg___erc_en___width 1 -#define reg_bif_core_rw_grp3_cfg___erc_en___bit 20 -#define reg_bif_core_rw_grp3_cfg___mode___lsb 21 -#define reg_bif_core_rw_grp3_cfg___mode___width 1 -#define reg_bif_core_rw_grp3_cfg___mode___bit 21 -#define reg_bif_core_rw_grp3_cfg___gated_csp0___lsb 24 -#define reg_bif_core_rw_grp3_cfg___gated_csp0___width 2 -#define reg_bif_core_rw_grp3_cfg___gated_csp1___lsb 26 -#define reg_bif_core_rw_grp3_cfg___gated_csp1___width 2 -#define reg_bif_core_rw_grp3_cfg___gated_csp2___lsb 28 -#define reg_bif_core_rw_grp3_cfg___gated_csp2___width 2 -#define reg_bif_core_rw_grp3_cfg___gated_csp3___lsb 30 -#define reg_bif_core_rw_grp3_cfg___gated_csp3___width 2 -#define reg_bif_core_rw_grp3_cfg_offset 8 - -/* Register rw_grp4_cfg, scope bif_core, type rw */ -#define reg_bif_core_rw_grp4_cfg___lw___lsb 0 -#define reg_bif_core_rw_grp4_cfg___lw___width 6 -#define reg_bif_core_rw_grp4_cfg___ew___lsb 6 -#define reg_bif_core_rw_grp4_cfg___ew___width 3 -#define reg_bif_core_rw_grp4_cfg___zw___lsb 9 -#define reg_bif_core_rw_grp4_cfg___zw___width 3 -#define reg_bif_core_rw_grp4_cfg___aw___lsb 12 -#define reg_bif_core_rw_grp4_cfg___aw___width 2 -#define reg_bif_core_rw_grp4_cfg___dw___lsb 14 -#define reg_bif_core_rw_grp4_cfg___dw___width 2 -#define reg_bif_core_rw_grp4_cfg___ewb___lsb 16 -#define reg_bif_core_rw_grp4_cfg___ewb___width 2 -#define reg_bif_core_rw_grp4_cfg___bw___lsb 18 -#define reg_bif_core_rw_grp4_cfg___bw___width 1 -#define reg_bif_core_rw_grp4_cfg___bw___bit 18 -#define reg_bif_core_rw_grp4_cfg___wr_extend___lsb 19 -#define reg_bif_core_rw_grp4_cfg___wr_extend___width 1 -#define reg_bif_core_rw_grp4_cfg___wr_extend___bit 19 -#define reg_bif_core_rw_grp4_cfg___erc_en___lsb 20 -#define reg_bif_core_rw_grp4_cfg___erc_en___width 1 -#define reg_bif_core_rw_grp4_cfg___erc_en___bit 20 -#define reg_bif_core_rw_grp4_cfg___mode___lsb 21 -#define reg_bif_core_rw_grp4_cfg___mode___width 1 -#define reg_bif_core_rw_grp4_cfg___mode___bit 21 -#define reg_bif_core_rw_grp4_cfg___gated_csp4___lsb 26 -#define reg_bif_core_rw_grp4_cfg___gated_csp4___width 2 -#define reg_bif_core_rw_grp4_cfg___gated_csp5___lsb 28 -#define reg_bif_core_rw_grp4_cfg___gated_csp5___width 2 -#define reg_bif_core_rw_grp4_cfg___gated_csp6___lsb 30 -#define reg_bif_core_rw_grp4_cfg___gated_csp6___width 2 -#define reg_bif_core_rw_grp4_cfg_offset 12 - -/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */ -#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___lsb 0 -#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___width 5 -#define reg_bif_core_rw_sdram_cfg_grp0___ca___lsb 5 -#define reg_bif_core_rw_sdram_cfg_grp0___ca___width 3 -#define reg_bif_core_rw_sdram_cfg_grp0___type___lsb 8 -#define reg_bif_core_rw_sdram_cfg_grp0___type___width 1 -#define reg_bif_core_rw_sdram_cfg_grp0___type___bit 8 -#define reg_bif_core_rw_sdram_cfg_grp0___bw___lsb 9 -#define reg_bif_core_rw_sdram_cfg_grp0___bw___width 1 -#define reg_bif_core_rw_sdram_cfg_grp0___bw___bit 9 -#define reg_bif_core_rw_sdram_cfg_grp0___sh___lsb 10 -#define reg_bif_core_rw_sdram_cfg_grp0___sh___width 3 -#define reg_bif_core_rw_sdram_cfg_grp0___wmm___lsb 13 -#define reg_bif_core_rw_sdram_cfg_grp0___wmm___width 1 -#define reg_bif_core_rw_sdram_cfg_grp0___wmm___bit 13 -#define reg_bif_core_rw_sdram_cfg_grp0___sh16___lsb 14 -#define reg_bif_core_rw_sdram_cfg_grp0___sh16___width 1 -#define reg_bif_core_rw_sdram_cfg_grp0___sh16___bit 14 -#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___lsb 15 -#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___width 5 -#define reg_bif_core_rw_sdram_cfg_grp0_offset 16 - -/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */ -#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___lsb 0 -#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___width 5 -#define reg_bif_core_rw_sdram_cfg_grp1___ca___lsb 5 -#define reg_bif_core_rw_sdram_cfg_grp1___ca___width 3 -#define reg_bif_core_rw_sdram_cfg_grp1___type___lsb 8 -#define reg_bif_core_rw_sdram_cfg_grp1___type___width 1 -#define reg_bif_core_rw_sdram_cfg_grp1___type___bit 8 -#define reg_bif_core_rw_sdram_cfg_grp1___bw___lsb 9 -#define reg_bif_core_rw_sdram_cfg_grp1___bw___width 1 -#define reg_bif_core_rw_sdram_cfg_grp1___bw___bit 9 -#define reg_bif_core_rw_sdram_cfg_grp1___sh___lsb 10 -#define reg_bif_core_rw_sdram_cfg_grp1___sh___width 3 -#define reg_bif_core_rw_sdram_cfg_grp1___wmm___lsb 13 -#define reg_bif_core_rw_sdram_cfg_grp1___wmm___width 1 -#define reg_bif_core_rw_sdram_cfg_grp1___wmm___bit 13 -#define reg_bif_core_rw_sdram_cfg_grp1___sh16___lsb 14 -#define reg_bif_core_rw_sdram_cfg_grp1___sh16___width 1 -#define reg_bif_core_rw_sdram_cfg_grp1___sh16___bit 14 -#define reg_bif_core_rw_sdram_cfg_grp1_offset 20 - -/* Register rw_sdram_timing, scope bif_core, type rw */ -#define reg_bif_core_rw_sdram_timing___cl___lsb 0 -#define reg_bif_core_rw_sdram_timing___cl___width 3 -#define reg_bif_core_rw_sdram_timing___rcd___lsb 3 -#define reg_bif_core_rw_sdram_timing___rcd___width 3 -#define reg_bif_core_rw_sdram_timing___rp___lsb 6 -#define reg_bif_core_rw_sdram_timing___rp___width 3 -#define reg_bif_core_rw_sdram_timing___rc___lsb 9 -#define reg_bif_core_rw_sdram_timing___rc___width 2 -#define reg_bif_core_rw_sdram_timing___dpl___lsb 11 -#define reg_bif_core_rw_sdram_timing___dpl___width 2 -#define reg_bif_core_rw_sdram_timing___pde___lsb 13 -#define reg_bif_core_rw_sdram_timing___pde___width 1 -#define reg_bif_core_rw_sdram_timing___pde___bit 13 -#define reg_bif_core_rw_sdram_timing___ref___lsb 14 -#define reg_bif_core_rw_sdram_timing___ref___width 2 -#define reg_bif_core_rw_sdram_timing___cpd___lsb 16 -#define reg_bif_core_rw_sdram_timing___cpd___width 1 -#define reg_bif_core_rw_sdram_timing___cpd___bit 16 -#define reg_bif_core_rw_sdram_timing___sdcke___lsb 17 -#define reg_bif_core_rw_sdram_timing___sdcke___width 1 -#define reg_bif_core_rw_sdram_timing___sdcke___bit 17 -#define reg_bif_core_rw_sdram_timing___sdclk___lsb 18 -#define reg_bif_core_rw_sdram_timing___sdclk___width 1 -#define reg_bif_core_rw_sdram_timing___sdclk___bit 18 -#define reg_bif_core_rw_sdram_timing_offset 24 - -/* Register rw_sdram_cmd, scope bif_core, type rw */ -#define reg_bif_core_rw_sdram_cmd___cmd___lsb 0 -#define reg_bif_core_rw_sdram_cmd___cmd___width 3 -#define reg_bif_core_rw_sdram_cmd___mrs_data___lsb 3 -#define reg_bif_core_rw_sdram_cmd___mrs_data___width 15 -#define reg_bif_core_rw_sdram_cmd_offset 28 - -/* Register rs_sdram_ref_stat, scope bif_core, type rs */ -#define reg_bif_core_rs_sdram_ref_stat___ok___lsb 0 -#define reg_bif_core_rs_sdram_ref_stat___ok___width 1 -#define reg_bif_core_rs_sdram_ref_stat___ok___bit 0 -#define reg_bif_core_rs_sdram_ref_stat_offset 32 - -/* Register r_sdram_ref_stat, scope bif_core, type r */ -#define reg_bif_core_r_sdram_ref_stat___ok___lsb 0 -#define reg_bif_core_r_sdram_ref_stat___ok___width 1 -#define reg_bif_core_r_sdram_ref_stat___ok___bit 0 -#define reg_bif_core_r_sdram_ref_stat_offset 36 - - -/* Constants */ -#define regk_bif_core_bank2 0x00000000 -#define regk_bif_core_bank4 0x00000001 -#define regk_bif_core_bit10 0x0000000a -#define regk_bif_core_bit11 0x0000000b -#define regk_bif_core_bit12 0x0000000c -#define regk_bif_core_bit13 0x0000000d -#define regk_bif_core_bit14 0x0000000e -#define regk_bif_core_bit15 0x0000000f -#define regk_bif_core_bit16 0x00000010 -#define regk_bif_core_bit17 0x00000011 -#define regk_bif_core_bit18 0x00000012 -#define regk_bif_core_bit19 0x00000013 -#define regk_bif_core_bit20 0x00000014 -#define regk_bif_core_bit21 0x00000015 -#define regk_bif_core_bit22 0x00000016 -#define regk_bif_core_bit23 0x00000017 -#define regk_bif_core_bit24 0x00000018 -#define regk_bif_core_bit25 0x00000019 -#define regk_bif_core_bit26 0x0000001a -#define regk_bif_core_bit27 0x0000001b -#define regk_bif_core_bit28 0x0000001c -#define regk_bif_core_bit29 0x0000001d -#define regk_bif_core_bit9 0x00000009 -#define regk_bif_core_bw16 0x00000001 -#define regk_bif_core_bw32 0x00000000 -#define regk_bif_core_bwe 0x00000000 -#define regk_bif_core_cwe 0x00000001 -#define regk_bif_core_e15us 0x00000001 -#define regk_bif_core_e7800ns 0x00000002 -#define regk_bif_core_grp0 0x00000000 -#define regk_bif_core_grp1 0x00000001 -#define regk_bif_core_mrs 0x00000003 -#define regk_bif_core_no 0x00000000 -#define regk_bif_core_none 0x00000000 -#define regk_bif_core_nop 0x00000000 -#define regk_bif_core_off 0x00000000 -#define regk_bif_core_pre 0x00000002 -#define regk_bif_core_r_sdram_ref_stat_default 0x00000001 -#define regk_bif_core_rd 0x00000002 -#define regk_bif_core_ref 0x00000001 -#define regk_bif_core_rs_sdram_ref_stat_default 0x00000001 -#define regk_bif_core_rw_grp1_cfg_default 0x000006cf -#define regk_bif_core_rw_grp2_cfg_default 0x000006cf -#define regk_bif_core_rw_grp3_cfg_default 0x000006cf -#define regk_bif_core_rw_grp4_cfg_default 0x000006cf -#define regk_bif_core_rw_sdram_cfg_grp1_default 0x00000000 -#define regk_bif_core_slf 0x00000004 -#define regk_bif_core_wr 0x00000001 -#define regk_bif_core_yes 0x00000001 -#endif /* __bif_core_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/config_defs_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/config_defs_asm.h deleted file mode 100644 index a9908dfc2937..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/config_defs_asm.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef __config_defs_asm_h -#define __config_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../rtl/config_regs.r - * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp - * last modfied: Thu Mar 4 12:34:39 2004 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/config_defs_asm.h ../../rtl/config_regs.r - * id: $Id: config_defs_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register r_bootsel, scope config, type r */ -#define reg_config_r_bootsel___boot_mode___lsb 0 -#define reg_config_r_bootsel___boot_mode___width 3 -#define reg_config_r_bootsel___full_duplex___lsb 3 -#define reg_config_r_bootsel___full_duplex___width 1 -#define reg_config_r_bootsel___full_duplex___bit 3 -#define reg_config_r_bootsel___user___lsb 4 -#define reg_config_r_bootsel___user___width 1 -#define reg_config_r_bootsel___user___bit 4 -#define reg_config_r_bootsel___pll___lsb 5 -#define reg_config_r_bootsel___pll___width 1 -#define reg_config_r_bootsel___pll___bit 5 -#define reg_config_r_bootsel___flash_bw___lsb 6 -#define reg_config_r_bootsel___flash_bw___width 1 -#define reg_config_r_bootsel___flash_bw___bit 6 -#define reg_config_r_bootsel_offset 0 - -/* Register rw_clk_ctrl, scope config, type rw */ -#define reg_config_rw_clk_ctrl___pll___lsb 0 -#define reg_config_rw_clk_ctrl___pll___width 1 -#define reg_config_rw_clk_ctrl___pll___bit 0 -#define reg_config_rw_clk_ctrl___cpu___lsb 1 -#define reg_config_rw_clk_ctrl___cpu___width 1 -#define reg_config_rw_clk_ctrl___cpu___bit 1 -#define reg_config_rw_clk_ctrl___iop___lsb 2 -#define reg_config_rw_clk_ctrl___iop___width 1 -#define reg_config_rw_clk_ctrl___iop___bit 2 -#define reg_config_rw_clk_ctrl___dma01_eth0___lsb 3 -#define reg_config_rw_clk_ctrl___dma01_eth0___width 1 -#define reg_config_rw_clk_ctrl___dma01_eth0___bit 3 -#define reg_config_rw_clk_ctrl___dma23___lsb 4 -#define reg_config_rw_clk_ctrl___dma23___width 1 -#define reg_config_rw_clk_ctrl___dma23___bit 4 -#define reg_config_rw_clk_ctrl___dma45___lsb 5 -#define reg_config_rw_clk_ctrl___dma45___width 1 -#define reg_config_rw_clk_ctrl___dma45___bit 5 -#define reg_config_rw_clk_ctrl___dma67___lsb 6 -#define reg_config_rw_clk_ctrl___dma67___width 1 -#define reg_config_rw_clk_ctrl___dma67___bit 6 -#define reg_config_rw_clk_ctrl___dma89_strcop___lsb 7 -#define reg_config_rw_clk_ctrl___dma89_strcop___width 1 -#define reg_config_rw_clk_ctrl___dma89_strcop___bit 7 -#define reg_config_rw_clk_ctrl___bif___lsb 8 -#define reg_config_rw_clk_ctrl___bif___width 1 -#define reg_config_rw_clk_ctrl___bif___bit 8 -#define reg_config_rw_clk_ctrl___fix_io___lsb 9 -#define reg_config_rw_clk_ctrl___fix_io___width 1 -#define reg_config_rw_clk_ctrl___fix_io___bit 9 -#define reg_config_rw_clk_ctrl_offset 4 - -/* Register rw_pad_ctrl, scope config, type rw */ -#define reg_config_rw_pad_ctrl___usb_susp___lsb 0 -#define reg_config_rw_pad_ctrl___usb_susp___width 1 -#define reg_config_rw_pad_ctrl___usb_susp___bit 0 -#define reg_config_rw_pad_ctrl___phyrst_n___lsb 1 -#define reg_config_rw_pad_ctrl___phyrst_n___width 1 -#define reg_config_rw_pad_ctrl___phyrst_n___bit 1 -#define reg_config_rw_pad_ctrl_offset 8 - - -/* Constants */ -#define regk_config_bw16 0x00000000 -#define regk_config_bw32 0x00000001 -#define regk_config_master 0x00000005 -#define regk_config_nand 0x00000003 -#define regk_config_net_rx 0x00000001 -#define regk_config_net_tx_rx 0x00000002 -#define regk_config_no 0x00000000 -#define regk_config_none 0x00000007 -#define regk_config_nor 0x00000000 -#define regk_config_rw_clk_ctrl_default 0x00000002 -#define regk_config_rw_pad_ctrl_default 0x00000000 -#define regk_config_ser 0x00000004 -#define regk_config_slave 0x00000006 -#define regk_config_yes 0x00000001 -#endif /* __config_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/gio_defs_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/gio_defs_asm.h deleted file mode 100644 index be4c63936d90..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/gio_defs_asm.h +++ /dev/null @@ -1,276 +0,0 @@ -#ifndef __gio_defs_asm_h -#define __gio_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/gio/rtl/gio_regs.r - * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp - * last modfied: Mon Apr 11 16:07:47 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/gio_defs_asm.h ../../inst/gio/rtl/gio_regs.r - * id: $Id: gio_defs_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_pa_dout, scope gio, type rw */ -#define reg_gio_rw_pa_dout___data___lsb 0 -#define reg_gio_rw_pa_dout___data___width 8 -#define reg_gio_rw_pa_dout_offset 0 - -/* Register r_pa_din, scope gio, type r */ -#define reg_gio_r_pa_din___data___lsb 0 -#define reg_gio_r_pa_din___data___width 8 -#define reg_gio_r_pa_din_offset 4 - -/* Register rw_pa_oe, scope gio, type rw */ -#define reg_gio_rw_pa_oe___oe___lsb 0 -#define reg_gio_rw_pa_oe___oe___width 8 -#define reg_gio_rw_pa_oe_offset 8 - -/* Register rw_intr_cfg, scope gio, type rw */ -#define reg_gio_rw_intr_cfg___pa0___lsb 0 -#define reg_gio_rw_intr_cfg___pa0___width 3 -#define reg_gio_rw_intr_cfg___pa1___lsb 3 -#define reg_gio_rw_intr_cfg___pa1___width 3 -#define reg_gio_rw_intr_cfg___pa2___lsb 6 -#define reg_gio_rw_intr_cfg___pa2___width 3 -#define reg_gio_rw_intr_cfg___pa3___lsb 9 -#define reg_gio_rw_intr_cfg___pa3___width 3 -#define reg_gio_rw_intr_cfg___pa4___lsb 12 -#define reg_gio_rw_intr_cfg___pa4___width 3 -#define reg_gio_rw_intr_cfg___pa5___lsb 15 -#define reg_gio_rw_intr_cfg___pa5___width 3 -#define reg_gio_rw_intr_cfg___pa6___lsb 18 -#define reg_gio_rw_intr_cfg___pa6___width 3 -#define reg_gio_rw_intr_cfg___pa7___lsb 21 -#define reg_gio_rw_intr_cfg___pa7___width 3 -#define reg_gio_rw_intr_cfg_offset 12 - -/* Register rw_intr_mask, scope gio, type rw */ -#define reg_gio_rw_intr_mask___pa0___lsb 0 -#define reg_gio_rw_intr_mask___pa0___width 1 -#define reg_gio_rw_intr_mask___pa0___bit 0 -#define reg_gio_rw_intr_mask___pa1___lsb 1 -#define reg_gio_rw_intr_mask___pa1___width 1 -#define reg_gio_rw_intr_mask___pa1___bit 1 -#define reg_gio_rw_intr_mask___pa2___lsb 2 -#define reg_gio_rw_intr_mask___pa2___width 1 -#define reg_gio_rw_intr_mask___pa2___bit 2 -#define reg_gio_rw_intr_mask___pa3___lsb 3 -#define reg_gio_rw_intr_mask___pa3___width 1 -#define reg_gio_rw_intr_mask___pa3___bit 3 -#define reg_gio_rw_intr_mask___pa4___lsb 4 -#define reg_gio_rw_intr_mask___pa4___width 1 -#define reg_gio_rw_intr_mask___pa4___bit 4 -#define reg_gio_rw_intr_mask___pa5___lsb 5 -#define reg_gio_rw_intr_mask___pa5___width 1 -#define reg_gio_rw_intr_mask___pa5___bit 5 -#define reg_gio_rw_intr_mask___pa6___lsb 6 -#define reg_gio_rw_intr_mask___pa6___width 1 -#define reg_gio_rw_intr_mask___pa6___bit 6 -#define reg_gio_rw_intr_mask___pa7___lsb 7 -#define reg_gio_rw_intr_mask___pa7___width 1 -#define reg_gio_rw_intr_mask___pa7___bit 7 -#define reg_gio_rw_intr_mask_offset 16 - -/* Register rw_ack_intr, scope gio, type rw */ -#define reg_gio_rw_ack_intr___pa0___lsb 0 -#define reg_gio_rw_ack_intr___pa0___width 1 -#define reg_gio_rw_ack_intr___pa0___bit 0 -#define reg_gio_rw_ack_intr___pa1___lsb 1 -#define reg_gio_rw_ack_intr___pa1___width 1 -#define reg_gio_rw_ack_intr___pa1___bit 1 -#define reg_gio_rw_ack_intr___pa2___lsb 2 -#define reg_gio_rw_ack_intr___pa2___width 1 -#define reg_gio_rw_ack_intr___pa2___bit 2 -#define reg_gio_rw_ack_intr___pa3___lsb 3 -#define reg_gio_rw_ack_intr___pa3___width 1 -#define reg_gio_rw_ack_intr___pa3___bit 3 -#define reg_gio_rw_ack_intr___pa4___lsb 4 -#define reg_gio_rw_ack_intr___pa4___width 1 -#define reg_gio_rw_ack_intr___pa4___bit 4 -#define reg_gio_rw_ack_intr___pa5___lsb 5 -#define reg_gio_rw_ack_intr___pa5___width 1 -#define reg_gio_rw_ack_intr___pa5___bit 5 -#define reg_gio_rw_ack_intr___pa6___lsb 6 -#define reg_gio_rw_ack_intr___pa6___width 1 -#define reg_gio_rw_ack_intr___pa6___bit 6 -#define reg_gio_rw_ack_intr___pa7___lsb 7 -#define reg_gio_rw_ack_intr___pa7___width 1 -#define reg_gio_rw_ack_intr___pa7___bit 7 -#define reg_gio_rw_ack_intr_offset 20 - -/* Register r_intr, scope gio, type r */ -#define reg_gio_r_intr___pa0___lsb 0 -#define reg_gio_r_intr___pa0___width 1 -#define reg_gio_r_intr___pa0___bit 0 -#define reg_gio_r_intr___pa1___lsb 1 -#define reg_gio_r_intr___pa1___width 1 -#define reg_gio_r_intr___pa1___bit 1 -#define reg_gio_r_intr___pa2___lsb 2 -#define reg_gio_r_intr___pa2___width 1 -#define reg_gio_r_intr___pa2___bit 2 -#define reg_gio_r_intr___pa3___lsb 3 -#define reg_gio_r_intr___pa3___width 1 -#define reg_gio_r_intr___pa3___bit 3 -#define reg_gio_r_intr___pa4___lsb 4 -#define reg_gio_r_intr___pa4___width 1 -#define reg_gio_r_intr___pa4___bit 4 -#define reg_gio_r_intr___pa5___lsb 5 -#define reg_gio_r_intr___pa5___width 1 -#define reg_gio_r_intr___pa5___bit 5 -#define reg_gio_r_intr___pa6___lsb 6 -#define reg_gio_r_intr___pa6___width 1 -#define reg_gio_r_intr___pa6___bit 6 -#define reg_gio_r_intr___pa7___lsb 7 -#define reg_gio_r_intr___pa7___width 1 -#define reg_gio_r_intr___pa7___bit 7 -#define reg_gio_r_intr_offset 24 - -/* Register r_masked_intr, scope gio, type r */ -#define reg_gio_r_masked_intr___pa0___lsb 0 -#define reg_gio_r_masked_intr___pa0___width 1 -#define reg_gio_r_masked_intr___pa0___bit 0 -#define reg_gio_r_masked_intr___pa1___lsb 1 -#define reg_gio_r_masked_intr___pa1___width 1 -#define reg_gio_r_masked_intr___pa1___bit 1 -#define reg_gio_r_masked_intr___pa2___lsb 2 -#define reg_gio_r_masked_intr___pa2___width 1 -#define reg_gio_r_masked_intr___pa2___bit 2 -#define reg_gio_r_masked_intr___pa3___lsb 3 -#define reg_gio_r_masked_intr___pa3___width 1 -#define reg_gio_r_masked_intr___pa3___bit 3 -#define reg_gio_r_masked_intr___pa4___lsb 4 -#define reg_gio_r_masked_intr___pa4___width 1 -#define reg_gio_r_masked_intr___pa4___bit 4 -#define reg_gio_r_masked_intr___pa5___lsb 5 -#define reg_gio_r_masked_intr___pa5___width 1 -#define reg_gio_r_masked_intr___pa5___bit 5 -#define reg_gio_r_masked_intr___pa6___lsb 6 -#define reg_gio_r_masked_intr___pa6___width 1 -#define reg_gio_r_masked_intr___pa6___bit 6 -#define reg_gio_r_masked_intr___pa7___lsb 7 -#define reg_gio_r_masked_intr___pa7___width 1 -#define reg_gio_r_masked_intr___pa7___bit 7 -#define reg_gio_r_masked_intr_offset 28 - -/* Register rw_pb_dout, scope gio, type rw */ -#define reg_gio_rw_pb_dout___data___lsb 0 -#define reg_gio_rw_pb_dout___data___width 18 -#define reg_gio_rw_pb_dout_offset 32 - -/* Register r_pb_din, scope gio, type r */ -#define reg_gio_r_pb_din___data___lsb 0 -#define reg_gio_r_pb_din___data___width 18 -#define reg_gio_r_pb_din_offset 36 - -/* Register rw_pb_oe, scope gio, type rw */ -#define reg_gio_rw_pb_oe___oe___lsb 0 -#define reg_gio_rw_pb_oe___oe___width 18 -#define reg_gio_rw_pb_oe_offset 40 - -/* Register rw_pc_dout, scope gio, type rw */ -#define reg_gio_rw_pc_dout___data___lsb 0 -#define reg_gio_rw_pc_dout___data___width 18 -#define reg_gio_rw_pc_dout_offset 48 - -/* Register r_pc_din, scope gio, type r */ -#define reg_gio_r_pc_din___data___lsb 0 -#define reg_gio_r_pc_din___data___width 18 -#define reg_gio_r_pc_din_offset 52 - -/* Register rw_pc_oe, scope gio, type rw */ -#define reg_gio_rw_pc_oe___oe___lsb 0 -#define reg_gio_rw_pc_oe___oe___width 18 -#define reg_gio_rw_pc_oe_offset 56 - -/* Register rw_pd_dout, scope gio, type rw */ -#define reg_gio_rw_pd_dout___data___lsb 0 -#define reg_gio_rw_pd_dout___data___width 18 -#define reg_gio_rw_pd_dout_offset 64 - -/* Register r_pd_din, scope gio, type r */ -#define reg_gio_r_pd_din___data___lsb 0 -#define reg_gio_r_pd_din___data___width 18 -#define reg_gio_r_pd_din_offset 68 - -/* Register rw_pd_oe, scope gio, type rw */ -#define reg_gio_rw_pd_oe___oe___lsb 0 -#define reg_gio_rw_pd_oe___oe___width 18 -#define reg_gio_rw_pd_oe_offset 72 - -/* Register rw_pe_dout, scope gio, type rw */ -#define reg_gio_rw_pe_dout___data___lsb 0 -#define reg_gio_rw_pe_dout___data___width 18 -#define reg_gio_rw_pe_dout_offset 80 - -/* Register r_pe_din, scope gio, type r */ -#define reg_gio_r_pe_din___data___lsb 0 -#define reg_gio_r_pe_din___data___width 18 -#define reg_gio_r_pe_din_offset 84 - -/* Register rw_pe_oe, scope gio, type rw */ -#define reg_gio_rw_pe_oe___oe___lsb 0 -#define reg_gio_rw_pe_oe___oe___width 18 -#define reg_gio_rw_pe_oe_offset 88 - - -/* Constants */ -#define regk_gio_anyedge 0x00000007 -#define regk_gio_hi 0x00000001 -#define regk_gio_lo 0x00000002 -#define regk_gio_negedge 0x00000006 -#define regk_gio_no 0x00000000 -#define regk_gio_off 0x00000000 -#define regk_gio_posedge 0x00000005 -#define regk_gio_rw_intr_cfg_default 0x00000000 -#define regk_gio_rw_intr_mask_default 0x00000000 -#define regk_gio_rw_pa_oe_default 0x00000000 -#define regk_gio_rw_pb_oe_default 0x00000000 -#define regk_gio_rw_pc_oe_default 0x00000000 -#define regk_gio_rw_pd_oe_default 0x00000000 -#define regk_gio_rw_pe_oe_default 0x00000000 -#define regk_gio_set 0x00000003 -#define regk_gio_yes 0x00000001 -#endif /* __gio_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/pinmux_defs_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/pinmux_defs_asm.h deleted file mode 100644 index 30cf5a936b64..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/pinmux_defs_asm.h +++ /dev/null @@ -1,632 +0,0 @@ -#ifndef __pinmux_defs_asm_h -#define __pinmux_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r - * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp - * last modfied: Mon Apr 11 16:09:11 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/pinmux_defs_asm.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r - * id: $Id: pinmux_defs_asm.h,v 1.1 2007/04/11 11:00:39 ricardw Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_pa, scope pinmux, type rw */ -#define reg_pinmux_rw_pa___pa0___lsb 0 -#define reg_pinmux_rw_pa___pa0___width 1 -#define reg_pinmux_rw_pa___pa0___bit 0 -#define reg_pinmux_rw_pa___pa1___lsb 1 -#define reg_pinmux_rw_pa___pa1___width 1 -#define reg_pinmux_rw_pa___pa1___bit 1 -#define reg_pinmux_rw_pa___pa2___lsb 2 -#define reg_pinmux_rw_pa___pa2___width 1 -#define reg_pinmux_rw_pa___pa2___bit 2 -#define reg_pinmux_rw_pa___pa3___lsb 3 -#define reg_pinmux_rw_pa___pa3___width 1 -#define reg_pinmux_rw_pa___pa3___bit 3 -#define reg_pinmux_rw_pa___pa4___lsb 4 -#define reg_pinmux_rw_pa___pa4___width 1 -#define reg_pinmux_rw_pa___pa4___bit 4 -#define reg_pinmux_rw_pa___pa5___lsb 5 -#define reg_pinmux_rw_pa___pa5___width 1 -#define reg_pinmux_rw_pa___pa5___bit 5 -#define reg_pinmux_rw_pa___pa6___lsb 6 -#define reg_pinmux_rw_pa___pa6___width 1 -#define reg_pinmux_rw_pa___pa6___bit 6 -#define reg_pinmux_rw_pa___pa7___lsb 7 -#define reg_pinmux_rw_pa___pa7___width 1 -#define reg_pinmux_rw_pa___pa7___bit 7 -#define reg_pinmux_rw_pa___csp2_n___lsb 8 -#define reg_pinmux_rw_pa___csp2_n___width 1 -#define reg_pinmux_rw_pa___csp2_n___bit 8 -#define reg_pinmux_rw_pa___csp3_n___lsb 9 -#define reg_pinmux_rw_pa___csp3_n___width 1 -#define reg_pinmux_rw_pa___csp3_n___bit 9 -#define reg_pinmux_rw_pa___csp5_n___lsb 10 -#define reg_pinmux_rw_pa___csp5_n___width 1 -#define reg_pinmux_rw_pa___csp5_n___bit 10 -#define reg_pinmux_rw_pa___csp6_n___lsb 11 -#define reg_pinmux_rw_pa___csp6_n___width 1 -#define reg_pinmux_rw_pa___csp6_n___bit 11 -#define reg_pinmux_rw_pa___hsh4___lsb 12 -#define reg_pinmux_rw_pa___hsh4___width 1 -#define reg_pinmux_rw_pa___hsh4___bit 12 -#define reg_pinmux_rw_pa___hsh5___lsb 13 -#define reg_pinmux_rw_pa___hsh5___width 1 -#define reg_pinmux_rw_pa___hsh5___bit 13 -#define reg_pinmux_rw_pa___hsh6___lsb 14 -#define reg_pinmux_rw_pa___hsh6___width 1 -#define reg_pinmux_rw_pa___hsh6___bit 14 -#define reg_pinmux_rw_pa___hsh7___lsb 15 -#define reg_pinmux_rw_pa___hsh7___width 1 -#define reg_pinmux_rw_pa___hsh7___bit 15 -#define reg_pinmux_rw_pa_offset 0 - -/* Register rw_hwprot, scope pinmux, type rw */ -#define reg_pinmux_rw_hwprot___ser1___lsb 0 -#define reg_pinmux_rw_hwprot___ser1___width 1 -#define reg_pinmux_rw_hwprot___ser1___bit 0 -#define reg_pinmux_rw_hwprot___ser2___lsb 1 -#define reg_pinmux_rw_hwprot___ser2___width 1 -#define reg_pinmux_rw_hwprot___ser2___bit 1 -#define reg_pinmux_rw_hwprot___ser3___lsb 2 -#define reg_pinmux_rw_hwprot___ser3___width 1 -#define reg_pinmux_rw_hwprot___ser3___bit 2 -#define reg_pinmux_rw_hwprot___sser0___lsb 3 -#define reg_pinmux_rw_hwprot___sser0___width 1 -#define reg_pinmux_rw_hwprot___sser0___bit 3 -#define reg_pinmux_rw_hwprot___sser1___lsb 4 -#define reg_pinmux_rw_hwprot___sser1___width 1 -#define reg_pinmux_rw_hwprot___sser1___bit 4 -#define reg_pinmux_rw_hwprot___ata0___lsb 5 -#define reg_pinmux_rw_hwprot___ata0___width 1 -#define reg_pinmux_rw_hwprot___ata0___bit 5 -#define reg_pinmux_rw_hwprot___ata1___lsb 6 -#define reg_pinmux_rw_hwprot___ata1___width 1 -#define reg_pinmux_rw_hwprot___ata1___bit 6 -#define reg_pinmux_rw_hwprot___ata2___lsb 7 -#define reg_pinmux_rw_hwprot___ata2___width 1 -#define reg_pinmux_rw_hwprot___ata2___bit 7 -#define reg_pinmux_rw_hwprot___ata3___lsb 8 -#define reg_pinmux_rw_hwprot___ata3___width 1 -#define reg_pinmux_rw_hwprot___ata3___bit 8 -#define reg_pinmux_rw_hwprot___ata___lsb 9 -#define reg_pinmux_rw_hwprot___ata___width 1 -#define reg_pinmux_rw_hwprot___ata___bit 9 -#define reg_pinmux_rw_hwprot___eth1___lsb 10 -#define reg_pinmux_rw_hwprot___eth1___width 1 -#define reg_pinmux_rw_hwprot___eth1___bit 10 -#define reg_pinmux_rw_hwprot___eth1_mgm___lsb 11 -#define reg_pinmux_rw_hwprot___eth1_mgm___width 1 -#define reg_pinmux_rw_hwprot___eth1_mgm___bit 11 -#define reg_pinmux_rw_hwprot___timer___lsb 12 -#define reg_pinmux_rw_hwprot___timer___width 1 -#define reg_pinmux_rw_hwprot___timer___bit 12 -#define reg_pinmux_rw_hwprot___p21___lsb 13 -#define reg_pinmux_rw_hwprot___p21___width 1 -#define reg_pinmux_rw_hwprot___p21___bit 13 -#define reg_pinmux_rw_hwprot_offset 4 - -/* Register rw_pb_gio, scope pinmux, type rw */ -#define reg_pinmux_rw_pb_gio___pb0___lsb 0 -#define reg_pinmux_rw_pb_gio___pb0___width 1 -#define reg_pinmux_rw_pb_gio___pb0___bit 0 -#define reg_pinmux_rw_pb_gio___pb1___lsb 1 -#define reg_pinmux_rw_pb_gio___pb1___width 1 -#define reg_pinmux_rw_pb_gio___pb1___bit 1 -#define reg_pinmux_rw_pb_gio___pb2___lsb 2 -#define reg_pinmux_rw_pb_gio___pb2___width 1 -#define reg_pinmux_rw_pb_gio___pb2___bit 2 -#define reg_pinmux_rw_pb_gio___pb3___lsb 3 -#define reg_pinmux_rw_pb_gio___pb3___width 1 -#define reg_pinmux_rw_pb_gio___pb3___bit 3 -#define reg_pinmux_rw_pb_gio___pb4___lsb 4 -#define reg_pinmux_rw_pb_gio___pb4___width 1 -#define reg_pinmux_rw_pb_gio___pb4___bit 4 -#define reg_pinmux_rw_pb_gio___pb5___lsb 5 -#define reg_pinmux_rw_pb_gio___pb5___width 1 -#define reg_pinmux_rw_pb_gio___pb5___bit 5 -#define reg_pinmux_rw_pb_gio___pb6___lsb 6 -#define reg_pinmux_rw_pb_gio___pb6___width 1 -#define reg_pinmux_rw_pb_gio___pb6___bit 6 -#define reg_pinmux_rw_pb_gio___pb7___lsb 7 -#define reg_pinmux_rw_pb_gio___pb7___width 1 -#define reg_pinmux_rw_pb_gio___pb7___bit 7 -#define reg_pinmux_rw_pb_gio___pb8___lsb 8 -#define reg_pinmux_rw_pb_gio___pb8___width 1 -#define reg_pinmux_rw_pb_gio___pb8___bit 8 -#define reg_pinmux_rw_pb_gio___pb9___lsb 9 -#define reg_pinmux_rw_pb_gio___pb9___width 1 -#define reg_pinmux_rw_pb_gio___pb9___bit 9 -#define reg_pinmux_rw_pb_gio___pb10___lsb 10 -#define reg_pinmux_rw_pb_gio___pb10___width 1 -#define reg_pinmux_rw_pb_gio___pb10___bit 10 -#define reg_pinmux_rw_pb_gio___pb11___lsb 11 -#define reg_pinmux_rw_pb_gio___pb11___width 1 -#define reg_pinmux_rw_pb_gio___pb11___bit 11 -#define reg_pinmux_rw_pb_gio___pb12___lsb 12 -#define reg_pinmux_rw_pb_gio___pb12___width 1 -#define reg_pinmux_rw_pb_gio___pb12___bit 12 -#define reg_pinmux_rw_pb_gio___pb13___lsb 13 -#define reg_pinmux_rw_pb_gio___pb13___width 1 -#define reg_pinmux_rw_pb_gio___pb13___bit 13 -#define reg_pinmux_rw_pb_gio___pb14___lsb 14 -#define reg_pinmux_rw_pb_gio___pb14___width 1 -#define reg_pinmux_rw_pb_gio___pb14___bit 14 -#define reg_pinmux_rw_pb_gio___pb15___lsb 15 -#define reg_pinmux_rw_pb_gio___pb15___width 1 -#define reg_pinmux_rw_pb_gio___pb15___bit 15 -#define reg_pinmux_rw_pb_gio___pb16___lsb 16 -#define reg_pinmux_rw_pb_gio___pb16___width 1 -#define reg_pinmux_rw_pb_gio___pb16___bit 16 -#define reg_pinmux_rw_pb_gio___pb17___lsb 17 -#define reg_pinmux_rw_pb_gio___pb17___width 1 -#define reg_pinmux_rw_pb_gio___pb17___bit 17 -#define reg_pinmux_rw_pb_gio_offset 8 - -/* Register rw_pb_iop, scope pinmux, type rw */ -#define reg_pinmux_rw_pb_iop___pb0___lsb 0 -#define reg_pinmux_rw_pb_iop___pb0___width 1 -#define reg_pinmux_rw_pb_iop___pb0___bit 0 -#define reg_pinmux_rw_pb_iop___pb1___lsb 1 -#define reg_pinmux_rw_pb_iop___pb1___width 1 -#define reg_pinmux_rw_pb_iop___pb1___bit 1 -#define reg_pinmux_rw_pb_iop___pb2___lsb 2 -#define reg_pinmux_rw_pb_iop___pb2___width 1 -#define reg_pinmux_rw_pb_iop___pb2___bit 2 -#define reg_pinmux_rw_pb_iop___pb3___lsb 3 -#define reg_pinmux_rw_pb_iop___pb3___width 1 -#define reg_pinmux_rw_pb_iop___pb3___bit 3 -#define reg_pinmux_rw_pb_iop___pb4___lsb 4 -#define reg_pinmux_rw_pb_iop___pb4___width 1 -#define reg_pinmux_rw_pb_iop___pb4___bit 4 -#define reg_pinmux_rw_pb_iop___pb5___lsb 5 -#define reg_pinmux_rw_pb_iop___pb5___width 1 -#define reg_pinmux_rw_pb_iop___pb5___bit 5 -#define reg_pinmux_rw_pb_iop___pb6___lsb 6 -#define reg_pinmux_rw_pb_iop___pb6___width 1 -#define reg_pinmux_rw_pb_iop___pb6___bit 6 -#define reg_pinmux_rw_pb_iop___pb7___lsb 7 -#define reg_pinmux_rw_pb_iop___pb7___width 1 -#define reg_pinmux_rw_pb_iop___pb7___bit 7 -#define reg_pinmux_rw_pb_iop___pb8___lsb 8 -#define reg_pinmux_rw_pb_iop___pb8___width 1 -#define reg_pinmux_rw_pb_iop___pb8___bit 8 -#define reg_pinmux_rw_pb_iop___pb9___lsb 9 -#define reg_pinmux_rw_pb_iop___pb9___width 1 -#define reg_pinmux_rw_pb_iop___pb9___bit 9 -#define reg_pinmux_rw_pb_iop___pb10___lsb 10 -#define reg_pinmux_rw_pb_iop___pb10___width 1 -#define reg_pinmux_rw_pb_iop___pb10___bit 10 -#define reg_pinmux_rw_pb_iop___pb11___lsb 11 -#define reg_pinmux_rw_pb_iop___pb11___width 1 -#define reg_pinmux_rw_pb_iop___pb11___bit 11 -#define reg_pinmux_rw_pb_iop___pb12___lsb 12 -#define reg_pinmux_rw_pb_iop___pb12___width 1 -#define reg_pinmux_rw_pb_iop___pb12___bit 12 -#define reg_pinmux_rw_pb_iop___pb13___lsb 13 -#define reg_pinmux_rw_pb_iop___pb13___width 1 -#define reg_pinmux_rw_pb_iop___pb13___bit 13 -#define reg_pinmux_rw_pb_iop___pb14___lsb 14 -#define reg_pinmux_rw_pb_iop___pb14___width 1 -#define reg_pinmux_rw_pb_iop___pb14___bit 14 -#define reg_pinmux_rw_pb_iop___pb15___lsb 15 -#define reg_pinmux_rw_pb_iop___pb15___width 1 -#define reg_pinmux_rw_pb_iop___pb15___bit 15 -#define reg_pinmux_rw_pb_iop___pb16___lsb 16 -#define reg_pinmux_rw_pb_iop___pb16___width 1 -#define reg_pinmux_rw_pb_iop___pb16___bit 16 -#define reg_pinmux_rw_pb_iop___pb17___lsb 17 -#define reg_pinmux_rw_pb_iop___pb17___width 1 -#define reg_pinmux_rw_pb_iop___pb17___bit 17 -#define reg_pinmux_rw_pb_iop_offset 12 - -/* Register rw_pc_gio, scope pinmux, type rw */ -#define reg_pinmux_rw_pc_gio___pc0___lsb 0 -#define reg_pinmux_rw_pc_gio___pc0___width 1 -#define reg_pinmux_rw_pc_gio___pc0___bit 0 -#define reg_pinmux_rw_pc_gio___pc1___lsb 1 -#define reg_pinmux_rw_pc_gio___pc1___width 1 -#define reg_pinmux_rw_pc_gio___pc1___bit 1 -#define reg_pinmux_rw_pc_gio___pc2___lsb 2 -#define reg_pinmux_rw_pc_gio___pc2___width 1 -#define reg_pinmux_rw_pc_gio___pc2___bit 2 -#define reg_pinmux_rw_pc_gio___pc3___lsb 3 -#define reg_pinmux_rw_pc_gio___pc3___width 1 -#define reg_pinmux_rw_pc_gio___pc3___bit 3 -#define reg_pinmux_rw_pc_gio___pc4___lsb 4 -#define reg_pinmux_rw_pc_gio___pc4___width 1 -#define reg_pinmux_rw_pc_gio___pc4___bit 4 -#define reg_pinmux_rw_pc_gio___pc5___lsb 5 -#define reg_pinmux_rw_pc_gio___pc5___width 1 -#define reg_pinmux_rw_pc_gio___pc5___bit 5 -#define reg_pinmux_rw_pc_gio___pc6___lsb 6 -#define reg_pinmux_rw_pc_gio___pc6___width 1 -#define reg_pinmux_rw_pc_gio___pc6___bit 6 -#define reg_pinmux_rw_pc_gio___pc7___lsb 7 -#define reg_pinmux_rw_pc_gio___pc7___width 1 -#define reg_pinmux_rw_pc_gio___pc7___bit 7 -#define reg_pinmux_rw_pc_gio___pc8___lsb 8 -#define reg_pinmux_rw_pc_gio___pc8___width 1 -#define reg_pinmux_rw_pc_gio___pc8___bit 8 -#define reg_pinmux_rw_pc_gio___pc9___lsb 9 -#define reg_pinmux_rw_pc_gio___pc9___width 1 -#define reg_pinmux_rw_pc_gio___pc9___bit 9 -#define reg_pinmux_rw_pc_gio___pc10___lsb 10 -#define reg_pinmux_rw_pc_gio___pc10___width 1 -#define reg_pinmux_rw_pc_gio___pc10___bit 10 -#define reg_pinmux_rw_pc_gio___pc11___lsb 11 -#define reg_pinmux_rw_pc_gio___pc11___width 1 -#define reg_pinmux_rw_pc_gio___pc11___bit 11 -#define reg_pinmux_rw_pc_gio___pc12___lsb 12 -#define reg_pinmux_rw_pc_gio___pc12___width 1 -#define reg_pinmux_rw_pc_gio___pc12___bit 12 -#define reg_pinmux_rw_pc_gio___pc13___lsb 13 -#define reg_pinmux_rw_pc_gio___pc13___width 1 -#define reg_pinmux_rw_pc_gio___pc13___bit 13 -#define reg_pinmux_rw_pc_gio___pc14___lsb 14 -#define reg_pinmux_rw_pc_gio___pc14___width 1 -#define reg_pinmux_rw_pc_gio___pc14___bit 14 -#define reg_pinmux_rw_pc_gio___pc15___lsb 15 -#define reg_pinmux_rw_pc_gio___pc15___width 1 -#define reg_pinmux_rw_pc_gio___pc15___bit 15 -#define reg_pinmux_rw_pc_gio___pc16___lsb 16 -#define reg_pinmux_rw_pc_gio___pc16___width 1 -#define reg_pinmux_rw_pc_gio___pc16___bit 16 -#define reg_pinmux_rw_pc_gio___pc17___lsb 17 -#define reg_pinmux_rw_pc_gio___pc17___width 1 -#define reg_pinmux_rw_pc_gio___pc17___bit 17 -#define reg_pinmux_rw_pc_gio_offset 16 - -/* Register rw_pc_iop, scope pinmux, type rw */ -#define reg_pinmux_rw_pc_iop___pc0___lsb 0 -#define reg_pinmux_rw_pc_iop___pc0___width 1 -#define reg_pinmux_rw_pc_iop___pc0___bit 0 -#define reg_pinmux_rw_pc_iop___pc1___lsb 1 -#define reg_pinmux_rw_pc_iop___pc1___width 1 -#define reg_pinmux_rw_pc_iop___pc1___bit 1 -#define reg_pinmux_rw_pc_iop___pc2___lsb 2 -#define reg_pinmux_rw_pc_iop___pc2___width 1 -#define reg_pinmux_rw_pc_iop___pc2___bit 2 -#define reg_pinmux_rw_pc_iop___pc3___lsb 3 -#define reg_pinmux_rw_pc_iop___pc3___width 1 -#define reg_pinmux_rw_pc_iop___pc3___bit 3 -#define reg_pinmux_rw_pc_iop___pc4___lsb 4 -#define reg_pinmux_rw_pc_iop___pc4___width 1 -#define reg_pinmux_rw_pc_iop___pc4___bit 4 -#define reg_pinmux_rw_pc_iop___pc5___lsb 5 -#define reg_pinmux_rw_pc_iop___pc5___width 1 -#define reg_pinmux_rw_pc_iop___pc5___bit 5 -#define reg_pinmux_rw_pc_iop___pc6___lsb 6 -#define reg_pinmux_rw_pc_iop___pc6___width 1 -#define reg_pinmux_rw_pc_iop___pc6___bit 6 -#define reg_pinmux_rw_pc_iop___pc7___lsb 7 -#define reg_pinmux_rw_pc_iop___pc7___width 1 -#define reg_pinmux_rw_pc_iop___pc7___bit 7 -#define reg_pinmux_rw_pc_iop___pc8___lsb 8 -#define reg_pinmux_rw_pc_iop___pc8___width 1 -#define reg_pinmux_rw_pc_iop___pc8___bit 8 -#define reg_pinmux_rw_pc_iop___pc9___lsb 9 -#define reg_pinmux_rw_pc_iop___pc9___width 1 -#define reg_pinmux_rw_pc_iop___pc9___bit 9 -#define reg_pinmux_rw_pc_iop___pc10___lsb 10 -#define reg_pinmux_rw_pc_iop___pc10___width 1 -#define reg_pinmux_rw_pc_iop___pc10___bit 10 -#define reg_pinmux_rw_pc_iop___pc11___lsb 11 -#define reg_pinmux_rw_pc_iop___pc11___width 1 -#define reg_pinmux_rw_pc_iop___pc11___bit 11 -#define reg_pinmux_rw_pc_iop___pc12___lsb 12 -#define reg_pinmux_rw_pc_iop___pc12___width 1 -#define reg_pinmux_rw_pc_iop___pc12___bit 12 -#define reg_pinmux_rw_pc_iop___pc13___lsb 13 -#define reg_pinmux_rw_pc_iop___pc13___width 1 -#define reg_pinmux_rw_pc_iop___pc13___bit 13 -#define reg_pinmux_rw_pc_iop___pc14___lsb 14 -#define reg_pinmux_rw_pc_iop___pc14___width 1 -#define reg_pinmux_rw_pc_iop___pc14___bit 14 -#define reg_pinmux_rw_pc_iop___pc15___lsb 15 -#define reg_pinmux_rw_pc_iop___pc15___width 1 -#define reg_pinmux_rw_pc_iop___pc15___bit 15 -#define reg_pinmux_rw_pc_iop___pc16___lsb 16 -#define reg_pinmux_rw_pc_iop___pc16___width 1 -#define reg_pinmux_rw_pc_iop___pc16___bit 16 -#define reg_pinmux_rw_pc_iop___pc17___lsb 17 -#define reg_pinmux_rw_pc_iop___pc17___width 1 -#define reg_pinmux_rw_pc_iop___pc17___bit 17 -#define reg_pinmux_rw_pc_iop_offset 20 - -/* Register rw_pd_gio, scope pinmux, type rw */ -#define reg_pinmux_rw_pd_gio___pd0___lsb 0 -#define reg_pinmux_rw_pd_gio___pd0___width 1 -#define reg_pinmux_rw_pd_gio___pd0___bit 0 -#define reg_pinmux_rw_pd_gio___pd1___lsb 1 -#define reg_pinmux_rw_pd_gio___pd1___width 1 -#define reg_pinmux_rw_pd_gio___pd1___bit 1 -#define reg_pinmux_rw_pd_gio___pd2___lsb 2 -#define reg_pinmux_rw_pd_gio___pd2___width 1 -#define reg_pinmux_rw_pd_gio___pd2___bit 2 -#define reg_pinmux_rw_pd_gio___pd3___lsb 3 -#define reg_pinmux_rw_pd_gio___pd3___width 1 -#define reg_pinmux_rw_pd_gio___pd3___bit 3 -#define reg_pinmux_rw_pd_gio___pd4___lsb 4 -#define reg_pinmux_rw_pd_gio___pd4___width 1 -#define reg_pinmux_rw_pd_gio___pd4___bit 4 -#define reg_pinmux_rw_pd_gio___pd5___lsb 5 -#define reg_pinmux_rw_pd_gio___pd5___width 1 -#define reg_pinmux_rw_pd_gio___pd5___bit 5 -#define reg_pinmux_rw_pd_gio___pd6___lsb 6 -#define reg_pinmux_rw_pd_gio___pd6___width 1 -#define reg_pinmux_rw_pd_gio___pd6___bit 6 -#define reg_pinmux_rw_pd_gio___pd7___lsb 7 -#define reg_pinmux_rw_pd_gio___pd7___width 1 -#define reg_pinmux_rw_pd_gio___pd7___bit 7 -#define reg_pinmux_rw_pd_gio___pd8___lsb 8 -#define reg_pinmux_rw_pd_gio___pd8___width 1 -#define reg_pinmux_rw_pd_gio___pd8___bit 8 -#define reg_pinmux_rw_pd_gio___pd9___lsb 9 -#define reg_pinmux_rw_pd_gio___pd9___width 1 -#define reg_pinmux_rw_pd_gio___pd9___bit 9 -#define reg_pinmux_rw_pd_gio___pd10___lsb 10 -#define reg_pinmux_rw_pd_gio___pd10___width 1 -#define reg_pinmux_rw_pd_gio___pd10___bit 10 -#define reg_pinmux_rw_pd_gio___pd11___lsb 11 -#define reg_pinmux_rw_pd_gio___pd11___width 1 -#define reg_pinmux_rw_pd_gio___pd11___bit 11 -#define reg_pinmux_rw_pd_gio___pd12___lsb 12 -#define reg_pinmux_rw_pd_gio___pd12___width 1 -#define reg_pinmux_rw_pd_gio___pd12___bit 12 -#define reg_pinmux_rw_pd_gio___pd13___lsb 13 -#define reg_pinmux_rw_pd_gio___pd13___width 1 -#define reg_pinmux_rw_pd_gio___pd13___bit 13 -#define reg_pinmux_rw_pd_gio___pd14___lsb 14 -#define reg_pinmux_rw_pd_gio___pd14___width 1 -#define reg_pinmux_rw_pd_gio___pd14___bit 14 -#define reg_pinmux_rw_pd_gio___pd15___lsb 15 -#define reg_pinmux_rw_pd_gio___pd15___width 1 -#define reg_pinmux_rw_pd_gio___pd15___bit 15 -#define reg_pinmux_rw_pd_gio___pd16___lsb 16 -#define reg_pinmux_rw_pd_gio___pd16___width 1 -#define reg_pinmux_rw_pd_gio___pd16___bit 16 -#define reg_pinmux_rw_pd_gio___pd17___lsb 17 -#define reg_pinmux_rw_pd_gio___pd17___width 1 -#define reg_pinmux_rw_pd_gio___pd17___bit 17 -#define reg_pinmux_rw_pd_gio_offset 24 - -/* Register rw_pd_iop, scope pinmux, type rw */ -#define reg_pinmux_rw_pd_iop___pd0___lsb 0 -#define reg_pinmux_rw_pd_iop___pd0___width 1 -#define reg_pinmux_rw_pd_iop___pd0___bit 0 -#define reg_pinmux_rw_pd_iop___pd1___lsb 1 -#define reg_pinmux_rw_pd_iop___pd1___width 1 -#define reg_pinmux_rw_pd_iop___pd1___bit 1 -#define reg_pinmux_rw_pd_iop___pd2___lsb 2 -#define reg_pinmux_rw_pd_iop___pd2___width 1 -#define reg_pinmux_rw_pd_iop___pd2___bit 2 -#define reg_pinmux_rw_pd_iop___pd3___lsb 3 -#define reg_pinmux_rw_pd_iop___pd3___width 1 -#define reg_pinmux_rw_pd_iop___pd3___bit 3 -#define reg_pinmux_rw_pd_iop___pd4___lsb 4 -#define reg_pinmux_rw_pd_iop___pd4___width 1 -#define reg_pinmux_rw_pd_iop___pd4___bit 4 -#define reg_pinmux_rw_pd_iop___pd5___lsb 5 -#define reg_pinmux_rw_pd_iop___pd5___width 1 -#define reg_pinmux_rw_pd_iop___pd5___bit 5 -#define reg_pinmux_rw_pd_iop___pd6___lsb 6 -#define reg_pinmux_rw_pd_iop___pd6___width 1 -#define reg_pinmux_rw_pd_iop___pd6___bit 6 -#define reg_pinmux_rw_pd_iop___pd7___lsb 7 -#define reg_pinmux_rw_pd_iop___pd7___width 1 -#define reg_pinmux_rw_pd_iop___pd7___bit 7 -#define reg_pinmux_rw_pd_iop___pd8___lsb 8 -#define reg_pinmux_rw_pd_iop___pd8___width 1 -#define reg_pinmux_rw_pd_iop___pd8___bit 8 -#define reg_pinmux_rw_pd_iop___pd9___lsb 9 -#define reg_pinmux_rw_pd_iop___pd9___width 1 -#define reg_pinmux_rw_pd_iop___pd9___bit 9 -#define reg_pinmux_rw_pd_iop___pd10___lsb 10 -#define reg_pinmux_rw_pd_iop___pd10___width 1 -#define reg_pinmux_rw_pd_iop___pd10___bit 10 -#define reg_pinmux_rw_pd_iop___pd11___lsb 11 -#define reg_pinmux_rw_pd_iop___pd11___width 1 -#define reg_pinmux_rw_pd_iop___pd11___bit 11 -#define reg_pinmux_rw_pd_iop___pd12___lsb 12 -#define reg_pinmux_rw_pd_iop___pd12___width 1 -#define reg_pinmux_rw_pd_iop___pd12___bit 12 -#define reg_pinmux_rw_pd_iop___pd13___lsb 13 -#define reg_pinmux_rw_pd_iop___pd13___width 1 -#define reg_pinmux_rw_pd_iop___pd13___bit 13 -#define reg_pinmux_rw_pd_iop___pd14___lsb 14 -#define reg_pinmux_rw_pd_iop___pd14___width 1 -#define reg_pinmux_rw_pd_iop___pd14___bit 14 -#define reg_pinmux_rw_pd_iop___pd15___lsb 15 -#define reg_pinmux_rw_pd_iop___pd15___width 1 -#define reg_pinmux_rw_pd_iop___pd15___bit 15 -#define reg_pinmux_rw_pd_iop___pd16___lsb 16 -#define reg_pinmux_rw_pd_iop___pd16___width 1 -#define reg_pinmux_rw_pd_iop___pd16___bit 16 -#define reg_pinmux_rw_pd_iop___pd17___lsb 17 -#define reg_pinmux_rw_pd_iop___pd17___width 1 -#define reg_pinmux_rw_pd_iop___pd17___bit 17 -#define reg_pinmux_rw_pd_iop_offset 28 - -/* Register rw_pe_gio, scope pinmux, type rw */ -#define reg_pinmux_rw_pe_gio___pe0___lsb 0 -#define reg_pinmux_rw_pe_gio___pe0___width 1 -#define reg_pinmux_rw_pe_gio___pe0___bit 0 -#define reg_pinmux_rw_pe_gio___pe1___lsb 1 -#define reg_pinmux_rw_pe_gio___pe1___width 1 -#define reg_pinmux_rw_pe_gio___pe1___bit 1 -#define reg_pinmux_rw_pe_gio___pe2___lsb 2 -#define reg_pinmux_rw_pe_gio___pe2___width 1 -#define reg_pinmux_rw_pe_gio___pe2___bit 2 -#define reg_pinmux_rw_pe_gio___pe3___lsb 3 -#define reg_pinmux_rw_pe_gio___pe3___width 1 -#define reg_pinmux_rw_pe_gio___pe3___bit 3 -#define reg_pinmux_rw_pe_gio___pe4___lsb 4 -#define reg_pinmux_rw_pe_gio___pe4___width 1 -#define reg_pinmux_rw_pe_gio___pe4___bit 4 -#define reg_pinmux_rw_pe_gio___pe5___lsb 5 -#define reg_pinmux_rw_pe_gio___pe5___width 1 -#define reg_pinmux_rw_pe_gio___pe5___bit 5 -#define reg_pinmux_rw_pe_gio___pe6___lsb 6 -#define reg_pinmux_rw_pe_gio___pe6___width 1 -#define reg_pinmux_rw_pe_gio___pe6___bit 6 -#define reg_pinmux_rw_pe_gio___pe7___lsb 7 -#define reg_pinmux_rw_pe_gio___pe7___width 1 -#define reg_pinmux_rw_pe_gio___pe7___bit 7 -#define reg_pinmux_rw_pe_gio___pe8___lsb 8 -#define reg_pinmux_rw_pe_gio___pe8___width 1 -#define reg_pinmux_rw_pe_gio___pe8___bit 8 -#define reg_pinmux_rw_pe_gio___pe9___lsb 9 -#define reg_pinmux_rw_pe_gio___pe9___width 1 -#define reg_pinmux_rw_pe_gio___pe9___bit 9 -#define reg_pinmux_rw_pe_gio___pe10___lsb 10 -#define reg_pinmux_rw_pe_gio___pe10___width 1 -#define reg_pinmux_rw_pe_gio___pe10___bit 10 -#define reg_pinmux_rw_pe_gio___pe11___lsb 11 -#define reg_pinmux_rw_pe_gio___pe11___width 1 -#define reg_pinmux_rw_pe_gio___pe11___bit 11 -#define reg_pinmux_rw_pe_gio___pe12___lsb 12 -#define reg_pinmux_rw_pe_gio___pe12___width 1 -#define reg_pinmux_rw_pe_gio___pe12___bit 12 -#define reg_pinmux_rw_pe_gio___pe13___lsb 13 -#define reg_pinmux_rw_pe_gio___pe13___width 1 -#define reg_pinmux_rw_pe_gio___pe13___bit 13 -#define reg_pinmux_rw_pe_gio___pe14___lsb 14 -#define reg_pinmux_rw_pe_gio___pe14___width 1 -#define reg_pinmux_rw_pe_gio___pe14___bit 14 -#define reg_pinmux_rw_pe_gio___pe15___lsb 15 -#define reg_pinmux_rw_pe_gio___pe15___width 1 -#define reg_pinmux_rw_pe_gio___pe15___bit 15 -#define reg_pinmux_rw_pe_gio___pe16___lsb 16 -#define reg_pinmux_rw_pe_gio___pe16___width 1 -#define reg_pinmux_rw_pe_gio___pe16___bit 16 -#define reg_pinmux_rw_pe_gio___pe17___lsb 17 -#define reg_pinmux_rw_pe_gio___pe17___width 1 -#define reg_pinmux_rw_pe_gio___pe17___bit 17 -#define reg_pinmux_rw_pe_gio_offset 32 - -/* Register rw_pe_iop, scope pinmux, type rw */ -#define reg_pinmux_rw_pe_iop___pe0___lsb 0 -#define reg_pinmux_rw_pe_iop___pe0___width 1 -#define reg_pinmux_rw_pe_iop___pe0___bit 0 -#define reg_pinmux_rw_pe_iop___pe1___lsb 1 -#define reg_pinmux_rw_pe_iop___pe1___width 1 -#define reg_pinmux_rw_pe_iop___pe1___bit 1 -#define reg_pinmux_rw_pe_iop___pe2___lsb 2 -#define reg_pinmux_rw_pe_iop___pe2___width 1 -#define reg_pinmux_rw_pe_iop___pe2___bit 2 -#define reg_pinmux_rw_pe_iop___pe3___lsb 3 -#define reg_pinmux_rw_pe_iop___pe3___width 1 -#define reg_pinmux_rw_pe_iop___pe3___bit 3 -#define reg_pinmux_rw_pe_iop___pe4___lsb 4 -#define reg_pinmux_rw_pe_iop___pe4___width 1 -#define reg_pinmux_rw_pe_iop___pe4___bit 4 -#define reg_pinmux_rw_pe_iop___pe5___lsb 5 -#define reg_pinmux_rw_pe_iop___pe5___width 1 -#define reg_pinmux_rw_pe_iop___pe5___bit 5 -#define reg_pinmux_rw_pe_iop___pe6___lsb 6 -#define reg_pinmux_rw_pe_iop___pe6___width 1 -#define reg_pinmux_rw_pe_iop___pe6___bit 6 -#define reg_pinmux_rw_pe_iop___pe7___lsb 7 -#define reg_pinmux_rw_pe_iop___pe7___width 1 -#define reg_pinmux_rw_pe_iop___pe7___bit 7 -#define reg_pinmux_rw_pe_iop___pe8___lsb 8 -#define reg_pinmux_rw_pe_iop___pe8___width 1 -#define reg_pinmux_rw_pe_iop___pe8___bit 8 -#define reg_pinmux_rw_pe_iop___pe9___lsb 9 -#define reg_pinmux_rw_pe_iop___pe9___width 1 -#define reg_pinmux_rw_pe_iop___pe9___bit 9 -#define reg_pinmux_rw_pe_iop___pe10___lsb 10 -#define reg_pinmux_rw_pe_iop___pe10___width 1 -#define reg_pinmux_rw_pe_iop___pe10___bit 10 -#define reg_pinmux_rw_pe_iop___pe11___lsb 11 -#define reg_pinmux_rw_pe_iop___pe11___width 1 -#define reg_pinmux_rw_pe_iop___pe11___bit 11 -#define reg_pinmux_rw_pe_iop___pe12___lsb 12 -#define reg_pinmux_rw_pe_iop___pe12___width 1 -#define reg_pinmux_rw_pe_iop___pe12___bit 12 -#define reg_pinmux_rw_pe_iop___pe13___lsb 13 -#define reg_pinmux_rw_pe_iop___pe13___width 1 -#define reg_pinmux_rw_pe_iop___pe13___bit 13 -#define reg_pinmux_rw_pe_iop___pe14___lsb 14 -#define reg_pinmux_rw_pe_iop___pe14___width 1 -#define reg_pinmux_rw_pe_iop___pe14___bit 14 -#define reg_pinmux_rw_pe_iop___pe15___lsb 15 -#define reg_pinmux_rw_pe_iop___pe15___width 1 -#define reg_pinmux_rw_pe_iop___pe15___bit 15 -#define reg_pinmux_rw_pe_iop___pe16___lsb 16 -#define reg_pinmux_rw_pe_iop___pe16___width 1 -#define reg_pinmux_rw_pe_iop___pe16___bit 16 -#define reg_pinmux_rw_pe_iop___pe17___lsb 17 -#define reg_pinmux_rw_pe_iop___pe17___width 1 -#define reg_pinmux_rw_pe_iop___pe17___bit 17 -#define reg_pinmux_rw_pe_iop_offset 36 - -/* Register rw_usb_phy, scope pinmux, type rw */ -#define reg_pinmux_rw_usb_phy___en_usb0___lsb 0 -#define reg_pinmux_rw_usb_phy___en_usb0___width 1 -#define reg_pinmux_rw_usb_phy___en_usb0___bit 0 -#define reg_pinmux_rw_usb_phy___en_usb1___lsb 1 -#define reg_pinmux_rw_usb_phy___en_usb1___width 1 -#define reg_pinmux_rw_usb_phy___en_usb1___bit 1 -#define reg_pinmux_rw_usb_phy_offset 40 - - -/* Constants */ -#define regk_pinmux_no 0x00000000 -#define regk_pinmux_rw_hwprot_default 0x00000000 -#define regk_pinmux_rw_pa_default 0x00000000 -#define regk_pinmux_rw_pb_gio_default 0x00000000 -#define regk_pinmux_rw_pb_iop_default 0x00000000 -#define regk_pinmux_rw_pc_gio_default 0x00000000 -#define regk_pinmux_rw_pc_iop_default 0x00000000 -#define regk_pinmux_rw_pd_gio_default 0x00000000 -#define regk_pinmux_rw_pd_iop_default 0x00000000 -#define regk_pinmux_rw_pe_gio_default 0x00000000 -#define regk_pinmux_rw_pe_iop_default 0x00000000 -#define regk_pinmux_rw_usb_phy_default 0x00000000 -#define regk_pinmux_yes 0x00000001 -#endif /* __pinmux_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/reg_map_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/reg_map_asm.h deleted file mode 100644 index 87517aebd2cb..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/reg_map_asm.h +++ /dev/null @@ -1,96 +0,0 @@ -#ifndef __reg_map_h -#define __reg_map_h - -/* - * This file is autogenerated from - * file: ../../mod/fakereg.rmap - * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp - * last modified: Wed Feb 11 20:53:25 2004 - * file: ../../rtl/global.rmap - * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp - * last modified: Mon Aug 18 17:08:23 2003 - * file: ../../mod/modreg.rmap - * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp - * last modified: Fri Feb 20 16:40:04 2004 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/reg_map_asm.h -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap - * id: $Id: reg_map_asm.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -#define regi_artpec_mod 0xb7044000 -#define regi_ata 0xb0032000 -#define regi_ata_mod 0xb7006000 -#define regi_barber 0xb701a000 -#define regi_bif_core 0xb0014000 -#define regi_bif_dma 0xb0016000 -#define regi_bif_slave 0xb0018000 -#define regi_bif_slave_ext 0xac000000 -#define regi_bus_master 0xb703c000 -#define regi_config 0xb003c000 -#define regi_dma0 0xb0000000 -#define regi_dma1 0xb0002000 -#define regi_dma2 0xb0004000 -#define regi_dma3 0xb0006000 -#define regi_dma4 0xb0008000 -#define regi_dma5 0xb000a000 -#define regi_dma6 0xb000c000 -#define regi_dma7 0xb000e000 -#define regi_dma8 0xb0010000 -#define regi_dma9 0xb0012000 -#define regi_eth0 0xb0034000 -#define regi_eth1 0xb0036000 -#define regi_eth_mod 0xb7004000 -#define regi_eth_mod1 0xb701c000 -#define regi_eth_strmod 0xb7008000 -#define regi_eth_strmod1 0xb7032000 -#define regi_ext_dma 0xb703a000 -#define regi_ext_mem 0xb7046000 -#define regi_gen_io 0xb7016000 -#define regi_gio 0xb001a000 -#define regi_hook 0xb7000000 -#define regi_iop 0xb0020000 -#define regi_irq 0xb001c000 -#define regi_irq_nmi 0xb701e000 -#define regi_marb 0xb003e000 -#define regi_marb_bp0 0xb003e240 -#define regi_marb_bp1 0xb003e280 -#define regi_marb_bp2 0xb003e2c0 -#define regi_marb_bp3 0xb003e300 -#define regi_nand_mod 0xb7014000 -#define regi_p21 0xb002e000 -#define regi_p21_mod 0xb7042000 -#define regi_pci_mod 0xb7010000 -#define regi_pin_test 0xb7018000 -#define regi_pinmux 0xb0038000 -#define regi_sdram_chk 0xb703e000 -#define regi_sdram_mod 0xb7012000 -#define regi_ser0 0xb0026000 -#define regi_ser1 0xb0028000 -#define regi_ser2 0xb002a000 -#define regi_ser3 0xb002c000 -#define regi_ser_mod0 0xb7020000 -#define regi_ser_mod1 0xb7022000 -#define regi_ser_mod2 0xb7024000 -#define regi_ser_mod3 0xb7026000 -#define regi_smif_stat 0xb700e000 -#define regi_sser0 0xb0022000 -#define regi_sser1 0xb0024000 -#define regi_sser_mod0 0xb700a000 -#define regi_sser_mod1 0xb700c000 -#define regi_strcop 0xb0030000 -#define regi_strmux 0xb003a000 -#define regi_strmux_tst 0xb7040000 -#define regi_tap 0xb7002000 -#define regi_timer 0xb001e000 -#define regi_timer_mod 0xb7034000 -#define regi_trace 0xb0040000 -#define regi_usb0 0xb7028000 -#define regi_usb1 0xb702a000 -#define regi_usb2 0xb702c000 -#define regi_usb3 0xb702e000 -#define regi_usb_dev 0xb7030000 -#define regi_utmi_mod0 0xb7036000 -#define regi_utmi_mod1 0xb7038000 -#endif /* __reg_map_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/timer_defs_asm.h b/include/asm-cris/arch-v32/mach-fs/hwregs/asm/timer_defs_asm.h deleted file mode 100644 index e1197194d5c1..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/asm/timer_defs_asm.h +++ /dev/null @@ -1,229 +0,0 @@ -#ifndef __timer_defs_asm_h -#define __timer_defs_asm_h - -/* - * This file is autogenerated from - * file: ../../inst/timer/rtl/timer_regs.r - * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp - * last modfied: Mon Apr 11 16:09:53 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/timer_defs_asm.h ../../inst/timer/rtl/timer_regs.r - * id: $Id: timer_defs_asm.h,v 1.1 2007/04/11 13:51:01 ricardw Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ - -#ifndef REG_FIELD -#define REG_FIELD( scope, reg, field, value ) \ - REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_FIELD_X_( value, shift ) ((value) << shift) -#endif - -#ifndef REG_STATE -#define REG_STATE( scope, reg, field, symbolic_value ) \ - REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb ) -#define REG_STATE_X_( k, shift ) (k << shift) -#endif - -#ifndef REG_MASK -#define REG_MASK( scope, reg, field ) \ - REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb ) -#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb) -#endif - -#ifndef REG_LSB -#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb -#endif - -#ifndef REG_BIT -#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset) -#define REG_ADDR_X_( inst, offs ) ((inst) + offs) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \ - STRIDE_##scope##_##reg ) -#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \ - ((inst) + offs + (index) * stride) -#endif - -/* Register rw_tmr0_div, scope timer, type rw */ -#define reg_timer_rw_tmr0_div_offset 0 - -/* Register r_tmr0_data, scope timer, type r */ -#define reg_timer_r_tmr0_data_offset 4 - -/* Register rw_tmr0_ctrl, scope timer, type rw */ -#define reg_timer_rw_tmr0_ctrl___op___lsb 0 -#define reg_timer_rw_tmr0_ctrl___op___width 2 -#define reg_timer_rw_tmr0_ctrl___freq___lsb 2 -#define reg_timer_rw_tmr0_ctrl___freq___width 3 -#define reg_timer_rw_tmr0_ctrl_offset 8 - -/* Register rw_tmr1_div, scope timer, type rw */ -#define reg_timer_rw_tmr1_div_offset 16 - -/* Register r_tmr1_data, scope timer, type r */ -#define reg_timer_r_tmr1_data_offset 20 - -/* Register rw_tmr1_ctrl, scope timer, type rw */ -#define reg_timer_rw_tmr1_ctrl___op___lsb 0 -#define reg_timer_rw_tmr1_ctrl___op___width 2 -#define reg_timer_rw_tmr1_ctrl___freq___lsb 2 -#define reg_timer_rw_tmr1_ctrl___freq___width 3 -#define reg_timer_rw_tmr1_ctrl_offset 24 - -/* Register rs_cnt_data, scope timer, type rs */ -#define reg_timer_rs_cnt_data___tmr___lsb 0 -#define reg_timer_rs_cnt_data___tmr___width 24 -#define reg_timer_rs_cnt_data___cnt___lsb 24 -#define reg_timer_rs_cnt_data___cnt___width 8 -#define reg_timer_rs_cnt_data_offset 32 - -/* Register r_cnt_data, scope timer, type r */ -#define reg_timer_r_cnt_data___tmr___lsb 0 -#define reg_timer_r_cnt_data___tmr___width 24 -#define reg_timer_r_cnt_data___cnt___lsb 24 -#define reg_timer_r_cnt_data___cnt___width 8 -#define reg_timer_r_cnt_data_offset 36 - -/* Register rw_cnt_cfg, scope timer, type rw */ -#define reg_timer_rw_cnt_cfg___clk___lsb 0 -#define reg_timer_rw_cnt_cfg___clk___width 2 -#define reg_timer_rw_cnt_cfg_offset 40 - -/* Register rw_trig, scope timer, type rw */ -#define reg_timer_rw_trig_offset 48 - -/* Register rw_trig_cfg, scope timer, type rw */ -#define reg_timer_rw_trig_cfg___tmr___lsb 0 -#define reg_timer_rw_trig_cfg___tmr___width 2 -#define reg_timer_rw_trig_cfg_offset 52 - -/* Register r_time, scope timer, type r */ -#define reg_timer_r_time_offset 56 - -/* Register rw_out, scope timer, type rw */ -#define reg_timer_rw_out___tmr___lsb 0 -#define reg_timer_rw_out___tmr___width 2 -#define reg_timer_rw_out_offset 60 - -/* Register rw_wd_ctrl, scope timer, type rw */ -#define reg_timer_rw_wd_ctrl___cnt___lsb 0 -#define reg_timer_rw_wd_ctrl___cnt___width 8 -#define reg_timer_rw_wd_ctrl___cmd___lsb 8 -#define reg_timer_rw_wd_ctrl___cmd___width 1 -#define reg_timer_rw_wd_ctrl___cmd___bit 8 -#define reg_timer_rw_wd_ctrl___key___lsb 9 -#define reg_timer_rw_wd_ctrl___key___width 7 -#define reg_timer_rw_wd_ctrl_offset 64 - -/* Register r_wd_stat, scope timer, type r */ -#define reg_timer_r_wd_stat___cnt___lsb 0 -#define reg_timer_r_wd_stat___cnt___width 8 -#define reg_timer_r_wd_stat___cmd___lsb 8 -#define reg_timer_r_wd_stat___cmd___width 1 -#define reg_timer_r_wd_stat___cmd___bit 8 -#define reg_timer_r_wd_stat_offset 68 - -/* Register rw_intr_mask, scope timer, type rw */ -#define reg_timer_rw_intr_mask___tmr0___lsb 0 -#define reg_timer_rw_intr_mask___tmr0___width 1 -#define reg_timer_rw_intr_mask___tmr0___bit 0 -#define reg_timer_rw_intr_mask___tmr1___lsb 1 -#define reg_timer_rw_intr_mask___tmr1___width 1 -#define reg_timer_rw_intr_mask___tmr1___bit 1 -#define reg_timer_rw_intr_mask___cnt___lsb 2 -#define reg_timer_rw_intr_mask___cnt___width 1 -#define reg_timer_rw_intr_mask___cnt___bit 2 -#define reg_timer_rw_intr_mask___trig___lsb 3 -#define reg_timer_rw_intr_mask___trig___width 1 -#define reg_timer_rw_intr_mask___trig___bit 3 -#define reg_timer_rw_intr_mask_offset 72 - -/* Register rw_ack_intr, scope timer, type rw */ -#define reg_timer_rw_ack_intr___tmr0___lsb 0 -#define reg_timer_rw_ack_intr___tmr0___width 1 -#define reg_timer_rw_ack_intr___tmr0___bit 0 -#define reg_timer_rw_ack_intr___tmr1___lsb 1 -#define reg_timer_rw_ack_intr___tmr1___width 1 -#define reg_timer_rw_ack_intr___tmr1___bit 1 -#define reg_timer_rw_ack_intr___cnt___lsb 2 -#define reg_timer_rw_ack_intr___cnt___width 1 -#define reg_timer_rw_ack_intr___cnt___bit 2 -#define reg_timer_rw_ack_intr___trig___lsb 3 -#define reg_timer_rw_ack_intr___trig___width 1 -#define reg_timer_rw_ack_intr___trig___bit 3 -#define reg_timer_rw_ack_intr_offset 76 - -/* Register r_intr, scope timer, type r */ -#define reg_timer_r_intr___tmr0___lsb 0 -#define reg_timer_r_intr___tmr0___width 1 -#define reg_timer_r_intr___tmr0___bit 0 -#define reg_timer_r_intr___tmr1___lsb 1 -#define reg_timer_r_intr___tmr1___width 1 -#define reg_timer_r_intr___tmr1___bit 1 -#define reg_timer_r_intr___cnt___lsb 2 -#define reg_timer_r_intr___cnt___width 1 -#define reg_timer_r_intr___cnt___bit 2 -#define reg_timer_r_intr___trig___lsb 3 -#define reg_timer_r_intr___trig___width 1 -#define reg_timer_r_intr___trig___bit 3 -#define reg_timer_r_intr_offset 80 - -/* Register r_masked_intr, scope timer, type r */ -#define reg_timer_r_masked_intr___tmr0___lsb 0 -#define reg_timer_r_masked_intr___tmr0___width 1 -#define reg_timer_r_masked_intr___tmr0___bit 0 -#define reg_timer_r_masked_intr___tmr1___lsb 1 -#define reg_timer_r_masked_intr___tmr1___width 1 -#define reg_timer_r_masked_intr___tmr1___bit 1 -#define reg_timer_r_masked_intr___cnt___lsb 2 -#define reg_timer_r_masked_intr___cnt___width 1 -#define reg_timer_r_masked_intr___cnt___bit 2 -#define reg_timer_r_masked_intr___trig___lsb 3 -#define reg_timer_r_masked_intr___trig___width 1 -#define reg_timer_r_masked_intr___trig___bit 3 -#define reg_timer_r_masked_intr_offset 84 - -/* Register rw_test, scope timer, type rw */ -#define reg_timer_rw_test___dis___lsb 0 -#define reg_timer_rw_test___dis___width 1 -#define reg_timer_rw_test___dis___bit 0 -#define reg_timer_rw_test___en___lsb 1 -#define reg_timer_rw_test___en___width 1 -#define reg_timer_rw_test___en___bit 1 -#define reg_timer_rw_test_offset 88 - - -/* Constants */ -#define regk_timer_ext 0x00000001 -#define regk_timer_f100 0x00000007 -#define regk_timer_f29_493 0x00000004 -#define regk_timer_f32 0x00000005 -#define regk_timer_f32_768 0x00000006 -#define regk_timer_hold 0x00000001 -#define regk_timer_ld 0x00000000 -#define regk_timer_no 0x00000000 -#define regk_timer_off 0x00000000 -#define regk_timer_run 0x00000002 -#define regk_timer_rw_cnt_cfg_default 0x00000000 -#define regk_timer_rw_intr_mask_default 0x00000000 -#define regk_timer_rw_out_default 0x00000000 -#define regk_timer_rw_test_default 0x00000000 -#define regk_timer_rw_tmr0_ctrl_default 0x00000000 -#define regk_timer_rw_tmr1_ctrl_default 0x00000000 -#define regk_timer_rw_trig_cfg_default 0x00000000 -#define regk_timer_start 0x00000001 -#define regk_timer_stop 0x00000000 -#define regk_timer_time 0x00000001 -#define regk_timer_tmr0 0x00000002 -#define regk_timer_tmr1 0x00000003 -#define regk_timer_yes 0x00000001 -#endif /* __timer_defs_asm_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/bif_core_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/bif_core_defs.h deleted file mode 100644 index 44362a62b47c..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/bif_core_defs.h +++ /dev/null @@ -1,284 +0,0 @@ -#ifndef __bif_core_defs_h -#define __bif_core_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_core_regs.r - * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp - * last modfied: Mon Apr 11 16:06:33 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_core_defs.h ../../inst/bif/rtl/bif_core_regs.r - * id: $Id: bif_core_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope bif_core */ - -/* Register rw_grp1_cfg, scope bif_core, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int wr_extend : 1; - unsigned int erc_en : 1; - unsigned int mode : 1; - unsigned int dummy1 : 10; -} reg_bif_core_rw_grp1_cfg; -#define REG_RD_ADDR_bif_core_rw_grp1_cfg 0 -#define REG_WR_ADDR_bif_core_rw_grp1_cfg 0 - -/* Register rw_grp2_cfg, scope bif_core, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int wr_extend : 1; - unsigned int erc_en : 1; - unsigned int mode : 1; - unsigned int dummy1 : 10; -} reg_bif_core_rw_grp2_cfg; -#define REG_RD_ADDR_bif_core_rw_grp2_cfg 4 -#define REG_WR_ADDR_bif_core_rw_grp2_cfg 4 - -/* Register rw_grp3_cfg, scope bif_core, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int wr_extend : 1; - unsigned int erc_en : 1; - unsigned int mode : 1; - unsigned int dummy1 : 2; - unsigned int gated_csp0 : 2; - unsigned int gated_csp1 : 2; - unsigned int gated_csp2 : 2; - unsigned int gated_csp3 : 2; -} reg_bif_core_rw_grp3_cfg; -#define REG_RD_ADDR_bif_core_rw_grp3_cfg 8 -#define REG_WR_ADDR_bif_core_rw_grp3_cfg 8 - -/* Register rw_grp4_cfg, scope bif_core, type rw */ -typedef struct { - unsigned int lw : 6; - unsigned int ew : 3; - unsigned int zw : 3; - unsigned int aw : 2; - unsigned int dw : 2; - unsigned int ewb : 2; - unsigned int bw : 1; - unsigned int wr_extend : 1; - unsigned int erc_en : 1; - unsigned int mode : 1; - unsigned int dummy1 : 4; - unsigned int gated_csp4 : 2; - unsigned int gated_csp5 : 2; - unsigned int gated_csp6 : 2; -} reg_bif_core_rw_grp4_cfg; -#define REG_RD_ADDR_bif_core_rw_grp4_cfg 12 -#define REG_WR_ADDR_bif_core_rw_grp4_cfg 12 - -/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */ -typedef struct { - unsigned int bank_sel : 5; - unsigned int ca : 3; - unsigned int type : 1; - unsigned int bw : 1; - unsigned int sh : 3; - unsigned int wmm : 1; - unsigned int sh16 : 1; - unsigned int grp_sel : 5; - unsigned int dummy1 : 12; -} reg_bif_core_rw_sdram_cfg_grp0; -#define REG_RD_ADDR_bif_core_rw_sdram_cfg_grp0 16 -#define REG_WR_ADDR_bif_core_rw_sdram_cfg_grp0 16 - -/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */ -typedef struct { - unsigned int bank_sel : 5; - unsigned int ca : 3; - unsigned int type : 1; - unsigned int bw : 1; - unsigned int sh : 3; - unsigned int wmm : 1; - unsigned int sh16 : 1; - unsigned int dummy1 : 17; -} reg_bif_core_rw_sdram_cfg_grp1; -#define REG_RD_ADDR_bif_core_rw_sdram_cfg_grp1 20 -#define REG_WR_ADDR_bif_core_rw_sdram_cfg_grp1 20 - -/* Register rw_sdram_timing, scope bif_core, type rw */ -typedef struct { - unsigned int cl : 3; - unsigned int rcd : 3; - unsigned int rp : 3; - unsigned int rc : 2; - unsigned int dpl : 2; - unsigned int pde : 1; - unsigned int ref : 2; - unsigned int cpd : 1; - unsigned int sdcke : 1; - unsigned int sdclk : 1; - unsigned int dummy1 : 13; -} reg_bif_core_rw_sdram_timing; -#define REG_RD_ADDR_bif_core_rw_sdram_timing 24 -#define REG_WR_ADDR_bif_core_rw_sdram_timing 24 - -/* Register rw_sdram_cmd, scope bif_core, type rw */ -typedef struct { - unsigned int cmd : 3; - unsigned int mrs_data : 15; - unsigned int dummy1 : 14; -} reg_bif_core_rw_sdram_cmd; -#define REG_RD_ADDR_bif_core_rw_sdram_cmd 28 -#define REG_WR_ADDR_bif_core_rw_sdram_cmd 28 - -/* Register rs_sdram_ref_stat, scope bif_core, type rs */ -typedef struct { - unsigned int ok : 1; - unsigned int dummy1 : 31; -} reg_bif_core_rs_sdram_ref_stat; -#define REG_RD_ADDR_bif_core_rs_sdram_ref_stat 32 - -/* Register r_sdram_ref_stat, scope bif_core, type r */ -typedef struct { - unsigned int ok : 1; - unsigned int dummy1 : 31; -} reg_bif_core_r_sdram_ref_stat; -#define REG_RD_ADDR_bif_core_r_sdram_ref_stat 36 - - -/* Constants */ -enum { - regk_bif_core_bank2 = 0x00000000, - regk_bif_core_bank4 = 0x00000001, - regk_bif_core_bit10 = 0x0000000a, - regk_bif_core_bit11 = 0x0000000b, - regk_bif_core_bit12 = 0x0000000c, - regk_bif_core_bit13 = 0x0000000d, - regk_bif_core_bit14 = 0x0000000e, - regk_bif_core_bit15 = 0x0000000f, - regk_bif_core_bit16 = 0x00000010, - regk_bif_core_bit17 = 0x00000011, - regk_bif_core_bit18 = 0x00000012, - regk_bif_core_bit19 = 0x00000013, - regk_bif_core_bit20 = 0x00000014, - regk_bif_core_bit21 = 0x00000015, - regk_bif_core_bit22 = 0x00000016, - regk_bif_core_bit23 = 0x00000017, - regk_bif_core_bit24 = 0x00000018, - regk_bif_core_bit25 = 0x00000019, - regk_bif_core_bit26 = 0x0000001a, - regk_bif_core_bit27 = 0x0000001b, - regk_bif_core_bit28 = 0x0000001c, - regk_bif_core_bit29 = 0x0000001d, - regk_bif_core_bit9 = 0x00000009, - regk_bif_core_bw16 = 0x00000001, - regk_bif_core_bw32 = 0x00000000, - regk_bif_core_bwe = 0x00000000, - regk_bif_core_cwe = 0x00000001, - regk_bif_core_e15us = 0x00000001, - regk_bif_core_e7800ns = 0x00000002, - regk_bif_core_grp0 = 0x00000000, - regk_bif_core_grp1 = 0x00000001, - regk_bif_core_mrs = 0x00000003, - regk_bif_core_no = 0x00000000, - regk_bif_core_none = 0x00000000, - regk_bif_core_nop = 0x00000000, - regk_bif_core_off = 0x00000000, - regk_bif_core_pre = 0x00000002, - regk_bif_core_r_sdram_ref_stat_default = 0x00000001, - regk_bif_core_rd = 0x00000002, - regk_bif_core_ref = 0x00000001, - regk_bif_core_rs_sdram_ref_stat_default = 0x00000001, - regk_bif_core_rw_grp1_cfg_default = 0x000006cf, - regk_bif_core_rw_grp2_cfg_default = 0x000006cf, - regk_bif_core_rw_grp3_cfg_default = 0x000006cf, - regk_bif_core_rw_grp4_cfg_default = 0x000006cf, - regk_bif_core_rw_sdram_cfg_grp1_default = 0x00000000, - regk_bif_core_slf = 0x00000004, - regk_bif_core_wr = 0x00000001, - regk_bif_core_yes = 0x00000001 -}; -#endif /* __bif_core_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/bif_dma_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/bif_dma_defs.h deleted file mode 100644 index 3cb51a09dba7..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/bif_dma_defs.h +++ /dev/null @@ -1,473 +0,0 @@ -#ifndef __bif_dma_defs_h -#define __bif_dma_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_dma_regs.r - * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp - * last modfied: Mon Apr 11 16:06:33 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_dma_defs.h ../../inst/bif/rtl/bif_dma_regs.r - * id: $Id: bif_dma_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope bif_dma */ - -/* Register rw_ch0_ctrl, scope bif_dma, type rw */ -typedef struct { - unsigned int bw : 2; - unsigned int burst_len : 1; - unsigned int cont : 1; - unsigned int end_pad : 1; - unsigned int cnt : 1; - unsigned int dreq_pin : 3; - unsigned int dreq_mode : 2; - unsigned int tc_in_pin : 3; - unsigned int tc_in_mode : 2; - unsigned int bus_mode : 2; - unsigned int rate_en : 1; - unsigned int wr_all : 1; - unsigned int dummy1 : 12; -} reg_bif_dma_rw_ch0_ctrl; -#define REG_RD_ADDR_bif_dma_rw_ch0_ctrl 0 -#define REG_WR_ADDR_bif_dma_rw_ch0_ctrl 0 - -/* Register rw_ch0_addr, scope bif_dma, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_bif_dma_rw_ch0_addr; -#define REG_RD_ADDR_bif_dma_rw_ch0_addr 4 -#define REG_WR_ADDR_bif_dma_rw_ch0_addr 4 - -/* Register rw_ch0_start, scope bif_dma, type rw */ -typedef struct { - unsigned int run : 1; - unsigned int dummy1 : 31; -} reg_bif_dma_rw_ch0_start; -#define REG_RD_ADDR_bif_dma_rw_ch0_start 8 -#define REG_WR_ADDR_bif_dma_rw_ch0_start 8 - -/* Register rw_ch0_cnt, scope bif_dma, type rw */ -typedef struct { - unsigned int start_cnt : 16; - unsigned int dummy1 : 16; -} reg_bif_dma_rw_ch0_cnt; -#define REG_RD_ADDR_bif_dma_rw_ch0_cnt 12 -#define REG_WR_ADDR_bif_dma_rw_ch0_cnt 12 - -/* Register r_ch0_stat, scope bif_dma, type r */ -typedef struct { - unsigned int cnt : 16; - unsigned int dummy1 : 15; - unsigned int run : 1; -} reg_bif_dma_r_ch0_stat; -#define REG_RD_ADDR_bif_dma_r_ch0_stat 16 - -/* Register rw_ch1_ctrl, scope bif_dma, type rw */ -typedef struct { - unsigned int bw : 2; - unsigned int burst_len : 1; - unsigned int cont : 1; - unsigned int end_discard : 1; - unsigned int cnt : 1; - unsigned int dreq_pin : 3; - unsigned int dreq_mode : 2; - unsigned int tc_in_pin : 3; - unsigned int tc_in_mode : 2; - unsigned int bus_mode : 2; - unsigned int rate_en : 1; - unsigned int dummy1 : 13; -} reg_bif_dma_rw_ch1_ctrl; -#define REG_RD_ADDR_bif_dma_rw_ch1_ctrl 32 -#define REG_WR_ADDR_bif_dma_rw_ch1_ctrl 32 - -/* Register rw_ch1_addr, scope bif_dma, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_bif_dma_rw_ch1_addr; -#define REG_RD_ADDR_bif_dma_rw_ch1_addr 36 -#define REG_WR_ADDR_bif_dma_rw_ch1_addr 36 - -/* Register rw_ch1_start, scope bif_dma, type rw */ -typedef struct { - unsigned int run : 1; - unsigned int dummy1 : 31; -} reg_bif_dma_rw_ch1_start; -#define REG_RD_ADDR_bif_dma_rw_ch1_start 40 -#define REG_WR_ADDR_bif_dma_rw_ch1_start 40 - -/* Register rw_ch1_cnt, scope bif_dma, type rw */ -typedef struct { - unsigned int start_cnt : 16; - unsigned int dummy1 : 16; -} reg_bif_dma_rw_ch1_cnt; -#define REG_RD_ADDR_bif_dma_rw_ch1_cnt 44 -#define REG_WR_ADDR_bif_dma_rw_ch1_cnt 44 - -/* Register r_ch1_stat, scope bif_dma, type r */ -typedef struct { - unsigned int cnt : 16; - unsigned int dummy1 : 15; - unsigned int run : 1; -} reg_bif_dma_r_ch1_stat; -#define REG_RD_ADDR_bif_dma_r_ch1_stat 48 - -/* Register rw_ch2_ctrl, scope bif_dma, type rw */ -typedef struct { - unsigned int bw : 2; - unsigned int burst_len : 1; - unsigned int cont : 1; - unsigned int end_pad : 1; - unsigned int cnt : 1; - unsigned int dreq_pin : 3; - unsigned int dreq_mode : 2; - unsigned int tc_in_pin : 3; - unsigned int tc_in_mode : 2; - unsigned int bus_mode : 2; - unsigned int rate_en : 1; - unsigned int wr_all : 1; - unsigned int dummy1 : 12; -} reg_bif_dma_rw_ch2_ctrl; -#define REG_RD_ADDR_bif_dma_rw_ch2_ctrl 64 -#define REG_WR_ADDR_bif_dma_rw_ch2_ctrl 64 - -/* Register rw_ch2_addr, scope bif_dma, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_bif_dma_rw_ch2_addr; -#define REG_RD_ADDR_bif_dma_rw_ch2_addr 68 -#define REG_WR_ADDR_bif_dma_rw_ch2_addr 68 - -/* Register rw_ch2_start, scope bif_dma, type rw */ -typedef struct { - unsigned int run : 1; - unsigned int dummy1 : 31; -} reg_bif_dma_rw_ch2_start; -#define REG_RD_ADDR_bif_dma_rw_ch2_start 72 -#define REG_WR_ADDR_bif_dma_rw_ch2_start 72 - -/* Register rw_ch2_cnt, scope bif_dma, type rw */ -typedef struct { - unsigned int start_cnt : 16; - unsigned int dummy1 : 16; -} reg_bif_dma_rw_ch2_cnt; -#define REG_RD_ADDR_bif_dma_rw_ch2_cnt 76 -#define REG_WR_ADDR_bif_dma_rw_ch2_cnt 76 - -/* Register r_ch2_stat, scope bif_dma, type r */ -typedef struct { - unsigned int cnt : 16; - unsigned int dummy1 : 15; - unsigned int run : 1; -} reg_bif_dma_r_ch2_stat; -#define REG_RD_ADDR_bif_dma_r_ch2_stat 80 - -/* Register rw_ch3_ctrl, scope bif_dma, type rw */ -typedef struct { - unsigned int bw : 2; - unsigned int burst_len : 1; - unsigned int cont : 1; - unsigned int end_discard : 1; - unsigned int cnt : 1; - unsigned int dreq_pin : 3; - unsigned int dreq_mode : 2; - unsigned int tc_in_pin : 3; - unsigned int tc_in_mode : 2; - unsigned int bus_mode : 2; - unsigned int rate_en : 1; - unsigned int dummy1 : 13; -} reg_bif_dma_rw_ch3_ctrl; -#define REG_RD_ADDR_bif_dma_rw_ch3_ctrl 96 -#define REG_WR_ADDR_bif_dma_rw_ch3_ctrl 96 - -/* Register rw_ch3_addr, scope bif_dma, type rw */ -typedef struct { - unsigned int addr : 32; -} reg_bif_dma_rw_ch3_addr; -#define REG_RD_ADDR_bif_dma_rw_ch3_addr 100 -#define REG_WR_ADDR_bif_dma_rw_ch3_addr 100 - -/* Register rw_ch3_start, scope bif_dma, type rw */ -typedef struct { - unsigned int run : 1; - unsigned int dummy1 : 31; -} reg_bif_dma_rw_ch3_start; -#define REG_RD_ADDR_bif_dma_rw_ch3_start 104 -#define REG_WR_ADDR_bif_dma_rw_ch3_start 104 - -/* Register rw_ch3_cnt, scope bif_dma, type rw */ -typedef struct { - unsigned int start_cnt : 16; - unsigned int dummy1 : 16; -} reg_bif_dma_rw_ch3_cnt; -#define REG_RD_ADDR_bif_dma_rw_ch3_cnt 108 -#define REG_WR_ADDR_bif_dma_rw_ch3_cnt 108 - -/* Register r_ch3_stat, scope bif_dma, type r */ -typedef struct { - unsigned int cnt : 16; - unsigned int dummy1 : 15; - unsigned int run : 1; -} reg_bif_dma_r_ch3_stat; -#define REG_RD_ADDR_bif_dma_r_ch3_stat 112 - -/* Register rw_intr_mask, scope bif_dma, type rw */ -typedef struct { - unsigned int ext_dma0 : 1; - unsigned int ext_dma1 : 1; - unsigned int ext_dma2 : 1; - unsigned int ext_dma3 : 1; - unsigned int dummy1 : 28; -} reg_bif_dma_rw_intr_mask; -#define REG_RD_ADDR_bif_dma_rw_intr_mask 128 -#define REG_WR_ADDR_bif_dma_rw_intr_mask 128 - -/* Register rw_ack_intr, scope bif_dma, type rw */ -typedef struct { - unsigned int ext_dma0 : 1; - unsigned int ext_dma1 : 1; - unsigned int ext_dma2 : 1; - unsigned int ext_dma3 : 1; - unsigned int dummy1 : 28; -} reg_bif_dma_rw_ack_intr; -#define REG_RD_ADDR_bif_dma_rw_ack_intr 132 -#define REG_WR_ADDR_bif_dma_rw_ack_intr 132 - -/* Register r_intr, scope bif_dma, type r */ -typedef struct { - unsigned int ext_dma0 : 1; - unsigned int ext_dma1 : 1; - unsigned int ext_dma2 : 1; - unsigned int ext_dma3 : 1; - unsigned int dummy1 : 28; -} reg_bif_dma_r_intr; -#define REG_RD_ADDR_bif_dma_r_intr 136 - -/* Register r_masked_intr, scope bif_dma, type r */ -typedef struct { - unsigned int ext_dma0 : 1; - unsigned int ext_dma1 : 1; - unsigned int ext_dma2 : 1; - unsigned int ext_dma3 : 1; - unsigned int dummy1 : 28; -} reg_bif_dma_r_masked_intr; -#define REG_RD_ADDR_bif_dma_r_masked_intr 140 - -/* Register rw_pin0_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin0_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin0_cfg 160 -#define REG_WR_ADDR_bif_dma_rw_pin0_cfg 160 - -/* Register rw_pin1_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin1_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin1_cfg 164 -#define REG_WR_ADDR_bif_dma_rw_pin1_cfg 164 - -/* Register rw_pin2_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin2_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin2_cfg 168 -#define REG_WR_ADDR_bif_dma_rw_pin2_cfg 168 - -/* Register rw_pin3_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin3_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin3_cfg 172 -#define REG_WR_ADDR_bif_dma_rw_pin3_cfg 172 - -/* Register rw_pin4_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin4_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin4_cfg 176 -#define REG_WR_ADDR_bif_dma_rw_pin4_cfg 176 - -/* Register rw_pin5_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin5_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin5_cfg 180 -#define REG_WR_ADDR_bif_dma_rw_pin5_cfg 180 - -/* Register rw_pin6_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin6_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin6_cfg 184 -#define REG_WR_ADDR_bif_dma_rw_pin6_cfg 184 - -/* Register rw_pin7_cfg, scope bif_dma, type rw */ -typedef struct { - unsigned int master_ch : 2; - unsigned int master_mode : 3; - unsigned int slave_ch : 2; - unsigned int slave_mode : 3; - unsigned int dummy1 : 22; -} reg_bif_dma_rw_pin7_cfg; -#define REG_RD_ADDR_bif_dma_rw_pin7_cfg 188 -#define REG_WR_ADDR_bif_dma_rw_pin7_cfg 188 - -/* Register r_pin_stat, scope bif_dma, type r */ -typedef struct { - unsigned int pin0 : 1; - unsigned int pin1 : 1; - unsigned int pin2 : 1; - unsigned int pin3 : 1; - unsigned int pin4 : 1; - unsigned int pin5 : 1; - unsigned int pin6 : 1; - unsigned int pin7 : 1; - unsigned int dummy1 : 24; -} reg_bif_dma_r_pin_stat; -#define REG_RD_ADDR_bif_dma_r_pin_stat 192 - - -/* Constants */ -enum { - regk_bif_dma_as_master = 0x00000001, - regk_bif_dma_as_slave = 0x00000001, - regk_bif_dma_burst1 = 0x00000000, - regk_bif_dma_burst8 = 0x00000001, - regk_bif_dma_bw16 = 0x00000001, - regk_bif_dma_bw32 = 0x00000002, - regk_bif_dma_bw8 = 0x00000000, - regk_bif_dma_dack = 0x00000006, - regk_bif_dma_dack_inv = 0x00000007, - regk_bif_dma_force = 0x00000001, - regk_bif_dma_hi = 0x00000003, - regk_bif_dma_inv = 0x00000003, - regk_bif_dma_lo = 0x00000002, - regk_bif_dma_master = 0x00000001, - regk_bif_dma_no = 0x00000000, - regk_bif_dma_norm = 0x00000002, - regk_bif_dma_off = 0x00000000, - regk_bif_dma_rw_ch0_ctrl_default = 0x00000000, - regk_bif_dma_rw_ch0_start_default = 0x00000000, - regk_bif_dma_rw_ch1_ctrl_default = 0x00000000, - regk_bif_dma_rw_ch1_start_default = 0x00000000, - regk_bif_dma_rw_ch2_ctrl_default = 0x00000000, - regk_bif_dma_rw_ch2_start_default = 0x00000000, - regk_bif_dma_rw_ch3_ctrl_default = 0x00000000, - regk_bif_dma_rw_ch3_start_default = 0x00000000, - regk_bif_dma_rw_intr_mask_default = 0x00000000, - regk_bif_dma_rw_pin0_cfg_default = 0x00000000, - regk_bif_dma_rw_pin1_cfg_default = 0x00000000, - regk_bif_dma_rw_pin2_cfg_default = 0x00000000, - regk_bif_dma_rw_pin3_cfg_default = 0x00000000, - regk_bif_dma_rw_pin4_cfg_default = 0x00000000, - regk_bif_dma_rw_pin5_cfg_default = 0x00000000, - regk_bif_dma_rw_pin6_cfg_default = 0x00000000, - regk_bif_dma_rw_pin7_cfg_default = 0x00000000, - regk_bif_dma_slave = 0x00000002, - regk_bif_dma_sreq = 0x00000006, - regk_bif_dma_sreq_inv = 0x00000007, - regk_bif_dma_tc = 0x00000004, - regk_bif_dma_tc_inv = 0x00000005, - regk_bif_dma_yes = 0x00000001 -}; -#endif /* __bif_dma_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/bif_slave_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/bif_slave_defs.h deleted file mode 100644 index 0c434585a3f9..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/bif_slave_defs.h +++ /dev/null @@ -1,249 +0,0 @@ -#ifndef __bif_slave_defs_h -#define __bif_slave_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_slave_regs.r - * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp - * last modfied: Mon Apr 11 16:06:34 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_slave_defs.h ../../inst/bif/rtl/bif_slave_regs.r - * id: $Id: bif_slave_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope bif_slave */ - -/* Register rw_slave_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int slave_id : 3; - unsigned int use_slave_id : 1; - unsigned int boot_rdy : 1; - unsigned int loopback : 1; - unsigned int dis : 1; - unsigned int dummy1 : 25; -} reg_bif_slave_rw_slave_cfg; -#define REG_RD_ADDR_bif_slave_rw_slave_cfg 0 -#define REG_WR_ADDR_bif_slave_rw_slave_cfg 0 - -/* Register r_slave_mode, scope bif_slave, type r */ -typedef struct { - unsigned int ch0_mode : 1; - unsigned int ch1_mode : 1; - unsigned int ch2_mode : 1; - unsigned int ch3_mode : 1; - unsigned int dummy1 : 28; -} reg_bif_slave_r_slave_mode; -#define REG_RD_ADDR_bif_slave_r_slave_mode 4 - -/* Register rw_ch0_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int rd_hold : 2; - unsigned int access_mode : 1; - unsigned int access_ctrl : 1; - unsigned int data_cs : 2; - unsigned int dummy1 : 26; -} reg_bif_slave_rw_ch0_cfg; -#define REG_RD_ADDR_bif_slave_rw_ch0_cfg 16 -#define REG_WR_ADDR_bif_slave_rw_ch0_cfg 16 - -/* Register rw_ch1_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int rd_hold : 2; - unsigned int access_mode : 1; - unsigned int access_ctrl : 1; - unsigned int data_cs : 2; - unsigned int dummy1 : 26; -} reg_bif_slave_rw_ch1_cfg; -#define REG_RD_ADDR_bif_slave_rw_ch1_cfg 20 -#define REG_WR_ADDR_bif_slave_rw_ch1_cfg 20 - -/* Register rw_ch2_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int rd_hold : 2; - unsigned int access_mode : 1; - unsigned int access_ctrl : 1; - unsigned int data_cs : 2; - unsigned int dummy1 : 26; -} reg_bif_slave_rw_ch2_cfg; -#define REG_RD_ADDR_bif_slave_rw_ch2_cfg 24 -#define REG_WR_ADDR_bif_slave_rw_ch2_cfg 24 - -/* Register rw_ch3_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int rd_hold : 2; - unsigned int access_mode : 1; - unsigned int access_ctrl : 1; - unsigned int data_cs : 2; - unsigned int dummy1 : 26; -} reg_bif_slave_rw_ch3_cfg; -#define REG_RD_ADDR_bif_slave_rw_ch3_cfg 28 -#define REG_WR_ADDR_bif_slave_rw_ch3_cfg 28 - -/* Register rw_arb_cfg, scope bif_slave, type rw */ -typedef struct { - unsigned int brin_mode : 1; - unsigned int brout_mode : 3; - unsigned int bg_mode : 3; - unsigned int release : 2; - unsigned int acquire : 1; - unsigned int settle_time : 2; - unsigned int dram_ctrl : 1; - unsigned int dummy1 : 19; -} reg_bif_slave_rw_arb_cfg; -#define REG_RD_ADDR_bif_slave_rw_arb_cfg 32 -#define REG_WR_ADDR_bif_slave_rw_arb_cfg 32 - -/* Register r_arb_stat, scope bif_slave, type r */ -typedef struct { - unsigned int init_mode : 1; - unsigned int mode : 1; - unsigned int brin : 1; - unsigned int brout : 1; - unsigned int bg : 1; - unsigned int dummy1 : 27; -} reg_bif_slave_r_arb_stat; -#define REG_RD_ADDR_bif_slave_r_arb_stat 36 - -/* Register rw_intr_mask, scope bif_slave, type rw */ -typedef struct { - unsigned int bus_release : 1; - unsigned int bus_acquire : 1; - unsigned int dummy1 : 30; -} reg_bif_slave_rw_intr_mask; -#define REG_RD_ADDR_bif_slave_rw_intr_mask 64 -#define REG_WR_ADDR_bif_slave_rw_intr_mask 64 - -/* Register rw_ack_intr, scope bif_slave, type rw */ -typedef struct { - unsigned int bus_release : 1; - unsigned int bus_acquire : 1; - unsigned int dummy1 : 30; -} reg_bif_slave_rw_ack_intr; -#define REG_RD_ADDR_bif_slave_rw_ack_intr 68 -#define REG_WR_ADDR_bif_slave_rw_ack_intr 68 - -/* Register r_intr, scope bif_slave, type r */ -typedef struct { - unsigned int bus_release : 1; - unsigned int bus_acquire : 1; - unsigned int dummy1 : 30; -} reg_bif_slave_r_intr; -#define REG_RD_ADDR_bif_slave_r_intr 72 - -/* Register r_masked_intr, scope bif_slave, type r */ -typedef struct { - unsigned int bus_release : 1; - unsigned int bus_acquire : 1; - unsigned int dummy1 : 30; -} reg_bif_slave_r_masked_intr; -#define REG_RD_ADDR_bif_slave_r_masked_intr 76 - - -/* Constants */ -enum { - regk_bif_slave_active_hi = 0x00000003, - regk_bif_slave_active_lo = 0x00000002, - regk_bif_slave_addr = 0x00000000, - regk_bif_slave_always = 0x00000001, - regk_bif_slave_at_idle = 0x00000002, - regk_bif_slave_burst_end = 0x00000003, - regk_bif_slave_dma = 0x00000001, - regk_bif_slave_hi = 0x00000003, - regk_bif_slave_inv = 0x00000001, - regk_bif_slave_lo = 0x00000002, - regk_bif_slave_local = 0x00000001, - regk_bif_slave_master = 0x00000000, - regk_bif_slave_mode_reg = 0x00000001, - regk_bif_slave_no = 0x00000000, - regk_bif_slave_norm = 0x00000000, - regk_bif_slave_on_access = 0x00000000, - regk_bif_slave_rw_arb_cfg_default = 0x00000000, - regk_bif_slave_rw_ch0_cfg_default = 0x00000000, - regk_bif_slave_rw_ch1_cfg_default = 0x00000000, - regk_bif_slave_rw_ch2_cfg_default = 0x00000000, - regk_bif_slave_rw_ch3_cfg_default = 0x00000000, - regk_bif_slave_rw_intr_mask_default = 0x00000000, - regk_bif_slave_rw_slave_cfg_default = 0x00000000, - regk_bif_slave_shared = 0x00000000, - regk_bif_slave_slave = 0x00000001, - regk_bif_slave_t0ns = 0x00000003, - regk_bif_slave_t10ns = 0x00000002, - regk_bif_slave_t20ns = 0x00000003, - regk_bif_slave_t30ns = 0x00000002, - regk_bif_slave_t40ns = 0x00000001, - regk_bif_slave_t50ns = 0x00000000, - regk_bif_slave_yes = 0x00000001, - regk_bif_slave_z = 0x00000004 -}; -#endif /* __bif_slave_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/config_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/config_defs.h deleted file mode 100644 index abc5f20705f7..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/config_defs.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef __config_defs_h -#define __config_defs_h - -/* - * This file is autogenerated from - * file: ../../rtl/config_regs.r - * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp - * last modfied: Thu Mar 4 12:34:39 2004 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile config_defs.h ../../rtl/config_regs.r - * id: $Id: config_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope config */ - -/* Register r_bootsel, scope config, type r */ -typedef struct { - unsigned int boot_mode : 3; - unsigned int full_duplex : 1; - unsigned int user : 1; - unsigned int pll : 1; - unsigned int flash_bw : 1; - unsigned int dummy1 : 25; -} reg_config_r_bootsel; -#define REG_RD_ADDR_config_r_bootsel 0 - -/* Register rw_clk_ctrl, scope config, type rw */ -typedef struct { - unsigned int pll : 1; - unsigned int cpu : 1; - unsigned int iop : 1; - unsigned int dma01_eth0 : 1; - unsigned int dma23 : 1; - unsigned int dma45 : 1; - unsigned int dma67 : 1; - unsigned int dma89_strcop : 1; - unsigned int bif : 1; - unsigned int fix_io : 1; - unsigned int dummy1 : 22; -} reg_config_rw_clk_ctrl; -#define REG_RD_ADDR_config_rw_clk_ctrl 4 -#define REG_WR_ADDR_config_rw_clk_ctrl 4 - -/* Register rw_pad_ctrl, scope config, type rw */ -typedef struct { - unsigned int usb_susp : 1; - unsigned int phyrst_n : 1; - unsigned int dummy1 : 30; -} reg_config_rw_pad_ctrl; -#define REG_RD_ADDR_config_rw_pad_ctrl 8 -#define REG_WR_ADDR_config_rw_pad_ctrl 8 - - -/* Constants */ -enum { - regk_config_bw16 = 0x00000000, - regk_config_bw32 = 0x00000001, - regk_config_master = 0x00000005, - regk_config_nand = 0x00000003, - regk_config_net_rx = 0x00000001, - regk_config_net_tx_rx = 0x00000002, - regk_config_no = 0x00000000, - regk_config_none = 0x00000007, - regk_config_nor = 0x00000000, - regk_config_rw_clk_ctrl_default = 0x00000002, - regk_config_rw_pad_ctrl_default = 0x00000000, - regk_config_ser = 0x00000004, - regk_config_slave = 0x00000006, - regk_config_yes = 0x00000001 -}; -#endif /* __config_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/gio_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/gio_defs.h deleted file mode 100644 index 26aa3efcf91b..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/gio_defs.h +++ /dev/null @@ -1,295 +0,0 @@ -#ifndef __gio_defs_h -#define __gio_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/gio/rtl/gio_regs.r - * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp - * last modfied: Mon Apr 11 16:07:47 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile gio_defs.h ../../inst/gio/rtl/gio_regs.r - * id: $Id: gio_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope gio */ - -/* Register rw_pa_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_dout; -#define REG_RD_ADDR_gio_rw_pa_dout 0 -#define REG_WR_ADDR_gio_rw_pa_dout 0 - -/* Register r_pa_din, scope gio, type r */ -typedef struct { - unsigned int data : 8; - unsigned int dummy1 : 24; -} reg_gio_r_pa_din; -#define REG_RD_ADDR_gio_r_pa_din 4 - -/* Register rw_pa_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 8; - unsigned int dummy1 : 24; -} reg_gio_rw_pa_oe; -#define REG_RD_ADDR_gio_rw_pa_oe 8 -#define REG_WR_ADDR_gio_rw_pa_oe 8 - -/* Register rw_intr_cfg, scope gio, type rw */ -typedef struct { - unsigned int pa0 : 3; - unsigned int pa1 : 3; - unsigned int pa2 : 3; - unsigned int pa3 : 3; - unsigned int pa4 : 3; - unsigned int pa5 : 3; - unsigned int pa6 : 3; - unsigned int pa7 : 3; - unsigned int dummy1 : 8; -} reg_gio_rw_intr_cfg; -#define REG_RD_ADDR_gio_rw_intr_cfg 12 -#define REG_WR_ADDR_gio_rw_intr_cfg 12 - -/* Register rw_intr_mask, scope gio, type rw */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int dummy1 : 24; -} reg_gio_rw_intr_mask; -#define REG_RD_ADDR_gio_rw_intr_mask 16 -#define REG_WR_ADDR_gio_rw_intr_mask 16 - -/* Register rw_ack_intr, scope gio, type rw */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int dummy1 : 24; -} reg_gio_rw_ack_intr; -#define REG_RD_ADDR_gio_rw_ack_intr 20 -#define REG_WR_ADDR_gio_rw_ack_intr 20 - -/* Register r_intr, scope gio, type r */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int dummy1 : 24; -} reg_gio_r_intr; -#define REG_RD_ADDR_gio_r_intr 24 - -/* Register r_masked_intr, scope gio, type r */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int dummy1 : 24; -} reg_gio_r_masked_intr; -#define REG_RD_ADDR_gio_r_masked_intr 28 - -/* Register rw_pb_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pb_dout; -#define REG_RD_ADDR_gio_rw_pb_dout 32 -#define REG_WR_ADDR_gio_rw_pb_dout 32 - -/* Register r_pb_din, scope gio, type r */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_r_pb_din; -#define REG_RD_ADDR_gio_r_pb_din 36 - -/* Register rw_pb_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pb_oe; -#define REG_RD_ADDR_gio_rw_pb_oe 40 -#define REG_WR_ADDR_gio_rw_pb_oe 40 - -/* Register rw_pc_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pc_dout; -#define REG_RD_ADDR_gio_rw_pc_dout 48 -#define REG_WR_ADDR_gio_rw_pc_dout 48 - -/* Register r_pc_din, scope gio, type r */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_r_pc_din; -#define REG_RD_ADDR_gio_r_pc_din 52 - -/* Register rw_pc_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pc_oe; -#define REG_RD_ADDR_gio_rw_pc_oe 56 -#define REG_WR_ADDR_gio_rw_pc_oe 56 - -/* Register rw_pd_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pd_dout; -#define REG_RD_ADDR_gio_rw_pd_dout 64 -#define REG_WR_ADDR_gio_rw_pd_dout 64 - -/* Register r_pd_din, scope gio, type r */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_r_pd_din; -#define REG_RD_ADDR_gio_r_pd_din 68 - -/* Register rw_pd_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pd_oe; -#define REG_RD_ADDR_gio_rw_pd_oe 72 -#define REG_WR_ADDR_gio_rw_pd_oe 72 - -/* Register rw_pe_dout, scope gio, type rw */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pe_dout; -#define REG_RD_ADDR_gio_rw_pe_dout 80 -#define REG_WR_ADDR_gio_rw_pe_dout 80 - -/* Register r_pe_din, scope gio, type r */ -typedef struct { - unsigned int data : 18; - unsigned int dummy1 : 14; -} reg_gio_r_pe_din; -#define REG_RD_ADDR_gio_r_pe_din 84 - -/* Register rw_pe_oe, scope gio, type rw */ -typedef struct { - unsigned int oe : 18; - unsigned int dummy1 : 14; -} reg_gio_rw_pe_oe; -#define REG_RD_ADDR_gio_rw_pe_oe 88 -#define REG_WR_ADDR_gio_rw_pe_oe 88 - - -/* Constants */ -enum { - regk_gio_anyedge = 0x00000007, - regk_gio_hi = 0x00000001, - regk_gio_lo = 0x00000002, - regk_gio_negedge = 0x00000006, - regk_gio_no = 0x00000000, - regk_gio_off = 0x00000000, - regk_gio_posedge = 0x00000005, - regk_gio_rw_intr_cfg_default = 0x00000000, - regk_gio_rw_intr_mask_default = 0x00000000, - regk_gio_rw_pa_oe_default = 0x00000000, - regk_gio_rw_pb_oe_default = 0x00000000, - regk_gio_rw_pc_oe_default = 0x00000000, - regk_gio_rw_pd_oe_default = 0x00000000, - regk_gio_rw_pe_oe_default = 0x00000000, - regk_gio_set = 0x00000003, - regk_gio_yes = 0x00000001 -}; -#endif /* __gio_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect.h b/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect.h deleted file mode 100644 index bacc2a895c21..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version - from ../../inst/intr_vect/rtl/guinness/ivmask.config.r -version . */ - -#ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R -#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R -#define MEMARB_INTR_VECT 0x31 -#define GEN_IO_INTR_VECT 0x32 -#define GIO_INTR_VECT GEN_IO_INTR_VECT -#define IOP0_INTR_VECT 0x33 -#define IOP1_INTR_VECT 0x34 -#define IOP2_INTR_VECT 0x35 -#define IOP3_INTR_VECT 0x36 -#define DMA0_INTR_VECT 0x37 -#define DMA1_INTR_VECT 0x38 -#define DMA2_INTR_VECT 0x39 -#define DMA3_INTR_VECT 0x3a -#define DMA4_INTR_VECT 0x3b -#define DMA5_INTR_VECT 0x3c -#define DMA6_INTR_VECT 0x3d -#define DMA7_INTR_VECT 0x3e -#define DMA8_INTR_VECT 0x3f -#define DMA9_INTR_VECT 0x40 -#define ATA_INTR_VECT 0x41 -#define SSER0_INTR_VECT 0x42 -#define SSER1_INTR_VECT 0x43 -#define SER0_INTR_VECT 0x44 -#define SER1_INTR_VECT 0x45 -#define SER2_INTR_VECT 0x46 -#define SER3_INTR_VECT 0x47 -#define P21_INTR_VECT 0x48 -#define ETH0_INTR_VECT 0x49 -#define ETH1_INTR_VECT 0x4a -#define TIMER_INTR_VECT 0x4b -#define TIMER0_INTR_VECT TIMER_INTR_VECT -#define BIF_ARB_INTR_VECT 0x4c -#define BIF_DMA_INTR_VECT 0x4d -#define EXT_INTR_VECT 0x4e -#define IPI_INTR_VECT 0x4f -#define NBR_INTR_VECT 0x50 -#endif diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect_defs.h deleted file mode 100644 index aa65128ae1aa..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/intr_vect_defs.h +++ /dev/null @@ -1,228 +0,0 @@ -#ifndef __intr_vect_defs_h -#define __intr_vect_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/intr_vect/rtl/guinness/ivmask.config.r - * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp - * last modfied: Mon Apr 11 16:08:03 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile intr_vect_defs.h ../../inst/intr_vect/rtl/guinness/ivmask.config.r - * id: $Id: intr_vect_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope intr_vect */ - -#define STRIDE_intr_vect_rw_mask 0 -/* Register rw_mask, scope intr_vect, type rw */ -typedef struct { - unsigned int memarb : 1; - unsigned int gen_io : 1; - unsigned int iop0 : 1; - unsigned int iop1 : 1; - unsigned int iop2 : 1; - unsigned int iop3 : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int ata : 1; - unsigned int sser0 : 1; - unsigned int sser1 : 1; - unsigned int ser0 : 1; - unsigned int ser1 : 1; - unsigned int ser2 : 1; - unsigned int ser3 : 1; - unsigned int p21 : 1; - unsigned int eth0 : 1; - unsigned int eth1 : 1; - unsigned int timer0 : 1; - unsigned int bif_arb : 1; - unsigned int bif_dma : 1; - unsigned int ext : 1; - unsigned int dummy1 : 2; -} reg_intr_vect_rw_mask; -#define REG_RD_ADDR_intr_vect_rw_mask 0 -#define REG_WR_ADDR_intr_vect_rw_mask 0 - -#define STRIDE_intr_vect_r_vect 0 -/* Register r_vect, scope intr_vect, type r */ -typedef struct { - unsigned int memarb : 1; - unsigned int gen_io : 1; - unsigned int iop0 : 1; - unsigned int iop1 : 1; - unsigned int iop2 : 1; - unsigned int iop3 : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int ata : 1; - unsigned int sser0 : 1; - unsigned int sser1 : 1; - unsigned int ser0 : 1; - unsigned int ser1 : 1; - unsigned int ser2 : 1; - unsigned int ser3 : 1; - unsigned int p21 : 1; - unsigned int eth0 : 1; - unsigned int eth1 : 1; - unsigned int timer : 1; - unsigned int bif_arb : 1; - unsigned int bif_dma : 1; - unsigned int ext : 1; - unsigned int dummy1 : 2; -} reg_intr_vect_r_vect; -#define REG_RD_ADDR_intr_vect_r_vect 4 - -#define STRIDE_intr_vect_r_masked_vect 0 -/* Register r_masked_vect, scope intr_vect, type r */ -typedef struct { - unsigned int memarb : 1; - unsigned int gen_io : 1; - unsigned int iop0 : 1; - unsigned int iop1 : 1; - unsigned int iop2 : 1; - unsigned int iop3 : 1; - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int ata : 1; - unsigned int sser0 : 1; - unsigned int sser1 : 1; - unsigned int ser0 : 1; - unsigned int ser1 : 1; - unsigned int ser2 : 1; - unsigned int ser3 : 1; - unsigned int p21 : 1; - unsigned int eth0 : 1; - unsigned int eth1 : 1; - unsigned int timer : 1; - unsigned int bif_arb : 1; - unsigned int bif_dma : 1; - unsigned int ext : 1; - unsigned int dummy1 : 2; -} reg_intr_vect_r_masked_vect; -#define REG_RD_ADDR_intr_vect_r_masked_vect 8 - -/* Register r_nmi, scope intr_vect, type r */ -typedef struct { - unsigned int ext : 1; - unsigned int watchdog : 1; - unsigned int dummy1 : 30; -} reg_intr_vect_r_nmi; -#define REG_RD_ADDR_intr_vect_r_nmi 12 - -/* Register r_guru, scope intr_vect, type r */ -typedef struct { - unsigned int jtag : 1; - unsigned int dummy1 : 31; -} reg_intr_vect_r_guru; -#define REG_RD_ADDR_intr_vect_r_guru 16 - -/* Register rw_ipi, scope intr_vect, type rw */ -typedef struct -{ - unsigned int vector; -} reg_intr_vect_rw_ipi; -#define REG_RD_ADDR_intr_vect_rw_ipi 20 -#define REG_WR_ADDR_intr_vect_rw_ipi 20 - -/* Constants */ -enum { - regk_intr_vect_off = 0x00000000, - regk_intr_vect_on = 0x00000001, - regk_intr_vect_rw_mask_default = 0x00000000 -}; -#endif /* __intr_vect_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/marb_bp_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/marb_bp_defs.h deleted file mode 100644 index dcaaec4620ba..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/marb_bp_defs.h +++ /dev/null @@ -1,205 +0,0 @@ -#ifndef __marb_bp_defs_h -#define __marb_bp_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Fri Nov 7 15:36:04 2003 - * - * by /n/asic/projects/guinness/design/top/inst/rdesc/rdes2c ../../rtl/global.rmap ../../mod/modreg.rmap -base 0xb0000000 ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_bp_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -/* C-code for register scope marb_bp */ - -/* Register rw_first_addr, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_first_addr; -#define REG_RD_ADDR_marb_bp_rw_first_addr 0 -#define REG_WR_ADDR_marb_bp_rw_first_addr 0 - -/* Register rw_last_addr, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_last_addr; -#define REG_RD_ADDR_marb_bp_rw_last_addr 4 -#define REG_WR_ADDR_marb_bp_rw_last_addr 4 - -/* Register rw_op, scope marb_bp, type rw */ -typedef struct { - unsigned int read : 1; - unsigned int write : 1; - unsigned int read_excl : 1; - unsigned int pri_write : 1; - unsigned int us_read : 1; - unsigned int us_write : 1; - unsigned int us_read_excl : 1; - unsigned int us_pri_write : 1; - unsigned int dummy1 : 24; -} reg_marb_bp_rw_op; -#define REG_RD_ADDR_marb_bp_rw_op 8 -#define REG_WR_ADDR_marb_bp_rw_op 8 - -/* Register rw_clients, scope marb_bp, type rw */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_rw_clients; -#define REG_RD_ADDR_marb_bp_rw_clients 12 -#define REG_WR_ADDR_marb_bp_rw_clients 12 - -/* Register rw_options, scope marb_bp, type rw */ -typedef struct { - unsigned int wrap : 1; - unsigned int dummy1 : 31; -} reg_marb_bp_rw_options; -#define REG_RD_ADDR_marb_bp_rw_options 16 -#define REG_WR_ADDR_marb_bp_rw_options 16 - -/* Register r_break_addr, scope marb_bp, type r */ -typedef unsigned int reg_marb_bp_r_break_addr; -#define REG_RD_ADDR_marb_bp_r_break_addr 20 - -/* Register r_break_op, scope marb_bp, type r */ -typedef struct { - unsigned int read : 1; - unsigned int write : 1; - unsigned int read_excl : 1; - unsigned int pri_write : 1; - unsigned int us_read : 1; - unsigned int us_write : 1; - unsigned int us_read_excl : 1; - unsigned int us_pri_write : 1; - unsigned int dummy1 : 24; -} reg_marb_bp_r_break_op; -#define REG_RD_ADDR_marb_bp_r_break_op 24 - -/* Register r_break_clients, scope marb_bp, type r */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_r_break_clients; -#define REG_RD_ADDR_marb_bp_r_break_clients 28 - -/* Register r_break_first_client, scope marb_bp, type r */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_r_break_first_client; -#define REG_RD_ADDR_marb_bp_r_break_first_client 32 - -/* Register r_break_size, scope marb_bp, type r */ -typedef unsigned int reg_marb_bp_r_break_size; -#define REG_RD_ADDR_marb_bp_r_break_size 36 - -/* Register rw_ack, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_ack; -#define REG_RD_ADDR_marb_bp_rw_ack 40 -#define REG_WR_ADDR_marb_bp_rw_ack 40 - - -/* Constants */ -enum { - regk_marb_bp_no = 0x00000000, - regk_marb_bp_rw_op_default = 0x00000000, - regk_marb_bp_rw_options_default = 0x00000000, - regk_marb_bp_yes = 0x00000001 -}; -#endif /* __marb_bp_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/marb_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/marb_defs.h deleted file mode 100644 index 254da0854986..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/marb_defs.h +++ /dev/null @@ -1,475 +0,0 @@ -#ifndef __marb_defs_h -#define __marb_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Mon Apr 11 16:12:16 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope marb */ - -#define STRIDE_marb_rw_int_slots 4 -/* Register rw_int_slots, scope marb, type rw */ -typedef struct { - unsigned int owner : 4; - unsigned int dummy1 : 28; -} reg_marb_rw_int_slots; -#define REG_RD_ADDR_marb_rw_int_slots 0 -#define REG_WR_ADDR_marb_rw_int_slots 0 - -#define STRIDE_marb_rw_ext_slots 4 -/* Register rw_ext_slots, scope marb, type rw */ -typedef struct { - unsigned int owner : 4; - unsigned int dummy1 : 28; -} reg_marb_rw_ext_slots; -#define REG_RD_ADDR_marb_rw_ext_slots 256 -#define REG_WR_ADDR_marb_rw_ext_slots 256 - -#define STRIDE_marb_rw_regs_slots 4 -/* Register rw_regs_slots, scope marb, type rw */ -typedef struct { - unsigned int owner : 4; - unsigned int dummy1 : 28; -} reg_marb_rw_regs_slots; -#define REG_RD_ADDR_marb_rw_regs_slots 512 -#define REG_WR_ADDR_marb_rw_regs_slots 512 - -/* Register rw_intr_mask, scope marb, type rw */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_rw_intr_mask; -#define REG_RD_ADDR_marb_rw_intr_mask 528 -#define REG_WR_ADDR_marb_rw_intr_mask 528 - -/* Register rw_ack_intr, scope marb, type rw */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_rw_ack_intr; -#define REG_RD_ADDR_marb_rw_ack_intr 532 -#define REG_WR_ADDR_marb_rw_ack_intr 532 - -/* Register r_intr, scope marb, type r */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_r_intr; -#define REG_RD_ADDR_marb_r_intr 536 - -/* Register r_masked_intr, scope marb, type r */ -typedef struct { - unsigned int bp0 : 1; - unsigned int bp1 : 1; - unsigned int bp2 : 1; - unsigned int bp3 : 1; - unsigned int dummy1 : 28; -} reg_marb_r_masked_intr; -#define REG_RD_ADDR_marb_r_masked_intr 540 - -/* Register rw_stop_mask, scope marb, type rw */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_rw_stop_mask; -#define REG_RD_ADDR_marb_rw_stop_mask 544 -#define REG_WR_ADDR_marb_rw_stop_mask 544 - -/* Register r_stopped, scope marb, type r */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_r_stopped; -#define REG_RD_ADDR_marb_r_stopped 548 - -/* Register rw_no_snoop, scope marb, type rw */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_rw_no_snoop; -#define REG_RD_ADDR_marb_rw_no_snoop 832 -#define REG_WR_ADDR_marb_rw_no_snoop 832 - -/* Register rw_no_snoop_rq, scope marb, type rw */ -typedef struct { - unsigned int dummy1 : 10; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int dummy2 : 20; -} reg_marb_rw_no_snoop_rq; -#define REG_RD_ADDR_marb_rw_no_snoop_rq 836 -#define REG_WR_ADDR_marb_rw_no_snoop_rq 836 - - -/* Constants */ -enum { - regk_marb_cpud = 0x0000000b, - regk_marb_cpui = 0x0000000a, - regk_marb_dma0 = 0x00000000, - regk_marb_dma1 = 0x00000001, - regk_marb_dma2 = 0x00000002, - regk_marb_dma3 = 0x00000003, - regk_marb_dma4 = 0x00000004, - regk_marb_dma5 = 0x00000005, - regk_marb_dma6 = 0x00000006, - regk_marb_dma7 = 0x00000007, - regk_marb_dma8 = 0x00000008, - regk_marb_dma9 = 0x00000009, - regk_marb_iop = 0x0000000c, - regk_marb_no = 0x00000000, - regk_marb_r_stopped_default = 0x00000000, - regk_marb_rw_ext_slots_default = 0x00000000, - regk_marb_rw_ext_slots_size = 0x00000040, - regk_marb_rw_int_slots_default = 0x00000000, - regk_marb_rw_int_slots_size = 0x00000040, - regk_marb_rw_intr_mask_default = 0x00000000, - regk_marb_rw_no_snoop_default = 0x00000000, - regk_marb_rw_no_snoop_rq_default = 0x00000000, - regk_marb_rw_regs_slots_default = 0x00000000, - regk_marb_rw_regs_slots_size = 0x00000004, - regk_marb_rw_stop_mask_default = 0x00000000, - regk_marb_slave = 0x0000000d, - regk_marb_yes = 0x00000001 -}; -#endif /* __marb_defs_h */ -#ifndef __marb_bp_defs_h -#define __marb_bp_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Mon Apr 11 16:12:16 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope marb_bp */ - -/* Register rw_first_addr, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_first_addr; -#define REG_RD_ADDR_marb_bp_rw_first_addr 0 -#define REG_WR_ADDR_marb_bp_rw_first_addr 0 - -/* Register rw_last_addr, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_last_addr; -#define REG_RD_ADDR_marb_bp_rw_last_addr 4 -#define REG_WR_ADDR_marb_bp_rw_last_addr 4 - -/* Register rw_op, scope marb_bp, type rw */ -typedef struct { - unsigned int rd : 1; - unsigned int wr : 1; - unsigned int rd_excl : 1; - unsigned int pri_wr : 1; - unsigned int us_rd : 1; - unsigned int us_wr : 1; - unsigned int us_rd_excl : 1; - unsigned int us_pri_wr : 1; - unsigned int dummy1 : 24; -} reg_marb_bp_rw_op; -#define REG_RD_ADDR_marb_bp_rw_op 8 -#define REG_WR_ADDR_marb_bp_rw_op 8 - -/* Register rw_clients, scope marb_bp, type rw */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_rw_clients; -#define REG_RD_ADDR_marb_bp_rw_clients 12 -#define REG_WR_ADDR_marb_bp_rw_clients 12 - -/* Register rw_options, scope marb_bp, type rw */ -typedef struct { - unsigned int wrap : 1; - unsigned int dummy1 : 31; -} reg_marb_bp_rw_options; -#define REG_RD_ADDR_marb_bp_rw_options 16 -#define REG_WR_ADDR_marb_bp_rw_options 16 - -/* Register r_brk_addr, scope marb_bp, type r */ -typedef unsigned int reg_marb_bp_r_brk_addr; -#define REG_RD_ADDR_marb_bp_r_brk_addr 20 - -/* Register r_brk_op, scope marb_bp, type r */ -typedef struct { - unsigned int rd : 1; - unsigned int wr : 1; - unsigned int rd_excl : 1; - unsigned int pri_wr : 1; - unsigned int us_rd : 1; - unsigned int us_wr : 1; - unsigned int us_rd_excl : 1; - unsigned int us_pri_wr : 1; - unsigned int dummy1 : 24; -} reg_marb_bp_r_brk_op; -#define REG_RD_ADDR_marb_bp_r_brk_op 24 - -/* Register r_brk_clients, scope marb_bp, type r */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_r_brk_clients; -#define REG_RD_ADDR_marb_bp_r_brk_clients 28 - -/* Register r_brk_first_client, scope marb_bp, type r */ -typedef struct { - unsigned int dma0 : 1; - unsigned int dma1 : 1; - unsigned int dma2 : 1; - unsigned int dma3 : 1; - unsigned int dma4 : 1; - unsigned int dma5 : 1; - unsigned int dma6 : 1; - unsigned int dma7 : 1; - unsigned int dma8 : 1; - unsigned int dma9 : 1; - unsigned int cpui : 1; - unsigned int cpud : 1; - unsigned int iop : 1; - unsigned int slave : 1; - unsigned int dummy1 : 18; -} reg_marb_bp_r_brk_first_client; -#define REG_RD_ADDR_marb_bp_r_brk_first_client 32 - -/* Register r_brk_size, scope marb_bp, type r */ -typedef unsigned int reg_marb_bp_r_brk_size; -#define REG_RD_ADDR_marb_bp_r_brk_size 36 - -/* Register rw_ack, scope marb_bp, type rw */ -typedef unsigned int reg_marb_bp_rw_ack; -#define REG_RD_ADDR_marb_bp_rw_ack 40 -#define REG_WR_ADDR_marb_bp_rw_ack 40 - - -/* Constants */ -enum { - regk_marb_bp_no = 0x00000000, - regk_marb_bp_rw_op_default = 0x00000000, - regk_marb_bp_rw_options_default = 0x00000000, - regk_marb_bp_yes = 0x00000001 -}; -#endif /* __marb_bp_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/pinmux_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/pinmux_defs.h deleted file mode 100644 index 751eab5f191c..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/pinmux_defs.h +++ /dev/null @@ -1,357 +0,0 @@ -#ifndef __pinmux_defs_h -#define __pinmux_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r - * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp - * last modfied: Mon Apr 11 16:09:11 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile pinmux_defs.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r - * id: $Id: pinmux_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope pinmux */ - -/* Register rw_pa, scope pinmux, type rw */ -typedef struct { - unsigned int pa0 : 1; - unsigned int pa1 : 1; - unsigned int pa2 : 1; - unsigned int pa3 : 1; - unsigned int pa4 : 1; - unsigned int pa5 : 1; - unsigned int pa6 : 1; - unsigned int pa7 : 1; - unsigned int csp2_n : 1; - unsigned int csp3_n : 1; - unsigned int csp5_n : 1; - unsigned int csp6_n : 1; - unsigned int hsh4 : 1; - unsigned int hsh5 : 1; - unsigned int hsh6 : 1; - unsigned int hsh7 : 1; - unsigned int dummy1 : 16; -} reg_pinmux_rw_pa; -#define REG_RD_ADDR_pinmux_rw_pa 0 -#define REG_WR_ADDR_pinmux_rw_pa 0 - -/* Register rw_hwprot, scope pinmux, type rw */ -typedef struct { - unsigned int ser1 : 1; - unsigned int ser2 : 1; - unsigned int ser3 : 1; - unsigned int sser0 : 1; - unsigned int sser1 : 1; - unsigned int ata0 : 1; - unsigned int ata1 : 1; - unsigned int ata2 : 1; - unsigned int ata3 : 1; - unsigned int ata : 1; - unsigned int eth1 : 1; - unsigned int eth1_mgm : 1; - unsigned int timer : 1; - unsigned int p21 : 1; - unsigned int dummy1 : 18; -} reg_pinmux_rw_hwprot; -#define REG_RD_ADDR_pinmux_rw_hwprot 4 -#define REG_WR_ADDR_pinmux_rw_hwprot 4 - -/* Register rw_pb_gio, scope pinmux, type rw */ -typedef struct { - unsigned int pb0 : 1; - unsigned int pb1 : 1; - unsigned int pb2 : 1; - unsigned int pb3 : 1; - unsigned int pb4 : 1; - unsigned int pb5 : 1; - unsigned int pb6 : 1; - unsigned int pb7 : 1; - unsigned int pb8 : 1; - unsigned int pb9 : 1; - unsigned int pb10 : 1; - unsigned int pb11 : 1; - unsigned int pb12 : 1; - unsigned int pb13 : 1; - unsigned int pb14 : 1; - unsigned int pb15 : 1; - unsigned int pb16 : 1; - unsigned int pb17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pb_gio; -#define REG_RD_ADDR_pinmux_rw_pb_gio 8 -#define REG_WR_ADDR_pinmux_rw_pb_gio 8 - -/* Register rw_pb_iop, scope pinmux, type rw */ -typedef struct { - unsigned int pb0 : 1; - unsigned int pb1 : 1; - unsigned int pb2 : 1; - unsigned int pb3 : 1; - unsigned int pb4 : 1; - unsigned int pb5 : 1; - unsigned int pb6 : 1; - unsigned int pb7 : 1; - unsigned int pb8 : 1; - unsigned int pb9 : 1; - unsigned int pb10 : 1; - unsigned int pb11 : 1; - unsigned int pb12 : 1; - unsigned int pb13 : 1; - unsigned int pb14 : 1; - unsigned int pb15 : 1; - unsigned int pb16 : 1; - unsigned int pb17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pb_iop; -#define REG_RD_ADDR_pinmux_rw_pb_iop 12 -#define REG_WR_ADDR_pinmux_rw_pb_iop 12 - -/* Register rw_pc_gio, scope pinmux, type rw */ -typedef struct { - unsigned int pc0 : 1; - unsigned int pc1 : 1; - unsigned int pc2 : 1; - unsigned int pc3 : 1; - unsigned int pc4 : 1; - unsigned int pc5 : 1; - unsigned int pc6 : 1; - unsigned int pc7 : 1; - unsigned int pc8 : 1; - unsigned int pc9 : 1; - unsigned int pc10 : 1; - unsigned int pc11 : 1; - unsigned int pc12 : 1; - unsigned int pc13 : 1; - unsigned int pc14 : 1; - unsigned int pc15 : 1; - unsigned int pc16 : 1; - unsigned int pc17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pc_gio; -#define REG_RD_ADDR_pinmux_rw_pc_gio 16 -#define REG_WR_ADDR_pinmux_rw_pc_gio 16 - -/* Register rw_pc_iop, scope pinmux, type rw */ -typedef struct { - unsigned int pc0 : 1; - unsigned int pc1 : 1; - unsigned int pc2 : 1; - unsigned int pc3 : 1; - unsigned int pc4 : 1; - unsigned int pc5 : 1; - unsigned int pc6 : 1; - unsigned int pc7 : 1; - unsigned int pc8 : 1; - unsigned int pc9 : 1; - unsigned int pc10 : 1; - unsigned int pc11 : 1; - unsigned int pc12 : 1; - unsigned int pc13 : 1; - unsigned int pc14 : 1; - unsigned int pc15 : 1; - unsigned int pc16 : 1; - unsigned int pc17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pc_iop; -#define REG_RD_ADDR_pinmux_rw_pc_iop 20 -#define REG_WR_ADDR_pinmux_rw_pc_iop 20 - -/* Register rw_pd_gio, scope pinmux, type rw */ -typedef struct { - unsigned int pd0 : 1; - unsigned int pd1 : 1; - unsigned int pd2 : 1; - unsigned int pd3 : 1; - unsigned int pd4 : 1; - unsigned int pd5 : 1; - unsigned int pd6 : 1; - unsigned int pd7 : 1; - unsigned int pd8 : 1; - unsigned int pd9 : 1; - unsigned int pd10 : 1; - unsigned int pd11 : 1; - unsigned int pd12 : 1; - unsigned int pd13 : 1; - unsigned int pd14 : 1; - unsigned int pd15 : 1; - unsigned int pd16 : 1; - unsigned int pd17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pd_gio; -#define REG_RD_ADDR_pinmux_rw_pd_gio 24 -#define REG_WR_ADDR_pinmux_rw_pd_gio 24 - -/* Register rw_pd_iop, scope pinmux, type rw */ -typedef struct { - unsigned int pd0 : 1; - unsigned int pd1 : 1; - unsigned int pd2 : 1; - unsigned int pd3 : 1; - unsigned int pd4 : 1; - unsigned int pd5 : 1; - unsigned int pd6 : 1; - unsigned int pd7 : 1; - unsigned int pd8 : 1; - unsigned int pd9 : 1; - unsigned int pd10 : 1; - unsigned int pd11 : 1; - unsigned int pd12 : 1; - unsigned int pd13 : 1; - unsigned int pd14 : 1; - unsigned int pd15 : 1; - unsigned int pd16 : 1; - unsigned int pd17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pd_iop; -#define REG_RD_ADDR_pinmux_rw_pd_iop 28 -#define REG_WR_ADDR_pinmux_rw_pd_iop 28 - -/* Register rw_pe_gio, scope pinmux, type rw */ -typedef struct { - unsigned int pe0 : 1; - unsigned int pe1 : 1; - unsigned int pe2 : 1; - unsigned int pe3 : 1; - unsigned int pe4 : 1; - unsigned int pe5 : 1; - unsigned int pe6 : 1; - unsigned int pe7 : 1; - unsigned int pe8 : 1; - unsigned int pe9 : 1; - unsigned int pe10 : 1; - unsigned int pe11 : 1; - unsigned int pe12 : 1; - unsigned int pe13 : 1; - unsigned int pe14 : 1; - unsigned int pe15 : 1; - unsigned int pe16 : 1; - unsigned int pe17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pe_gio; -#define REG_RD_ADDR_pinmux_rw_pe_gio 32 -#define REG_WR_ADDR_pinmux_rw_pe_gio 32 - -/* Register rw_pe_iop, scope pinmux, type rw */ -typedef struct { - unsigned int pe0 : 1; - unsigned int pe1 : 1; - unsigned int pe2 : 1; - unsigned int pe3 : 1; - unsigned int pe4 : 1; - unsigned int pe5 : 1; - unsigned int pe6 : 1; - unsigned int pe7 : 1; - unsigned int pe8 : 1; - unsigned int pe9 : 1; - unsigned int pe10 : 1; - unsigned int pe11 : 1; - unsigned int pe12 : 1; - unsigned int pe13 : 1; - unsigned int pe14 : 1; - unsigned int pe15 : 1; - unsigned int pe16 : 1; - unsigned int pe17 : 1; - unsigned int dummy1 : 14; -} reg_pinmux_rw_pe_iop; -#define REG_RD_ADDR_pinmux_rw_pe_iop 36 -#define REG_WR_ADDR_pinmux_rw_pe_iop 36 - -/* Register rw_usb_phy, scope pinmux, type rw */ -typedef struct { - unsigned int en_usb0 : 1; - unsigned int en_usb1 : 1; - unsigned int dummy1 : 30; -} reg_pinmux_rw_usb_phy; -#define REG_RD_ADDR_pinmux_rw_usb_phy 40 -#define REG_WR_ADDR_pinmux_rw_usb_phy 40 - - -/* Constants */ -enum { - regk_pinmux_no = 0x00000000, - regk_pinmux_rw_hwprot_default = 0x00000000, - regk_pinmux_rw_pa_default = 0x00000000, - regk_pinmux_rw_pb_gio_default = 0x00000000, - regk_pinmux_rw_pb_iop_default = 0x00000000, - regk_pinmux_rw_pc_gio_default = 0x00000000, - regk_pinmux_rw_pc_iop_default = 0x00000000, - regk_pinmux_rw_pd_gio_default = 0x00000000, - regk_pinmux_rw_pd_iop_default = 0x00000000, - regk_pinmux_rw_pe_gio_default = 0x00000000, - regk_pinmux_rw_pe_iop_default = 0x00000000, - regk_pinmux_rw_usb_phy_default = 0x00000000, - regk_pinmux_yes = 0x00000001 -}; -#endif /* __pinmux_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/reg_map.h b/include/asm-cris/arch-v32/mach-fs/hwregs/reg_map.h deleted file mode 100644 index 4146973a58b3..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/reg_map.h +++ /dev/null @@ -1,104 +0,0 @@ -#ifndef __reg_map_h -#define __reg_map_h - -/* - * This file is autogenerated from - * file: ../../mod/fakereg.rmap - * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp - * last modified: Wed Feb 11 20:53:25 2004 - * file: ../../rtl/global.rmap - * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp - * last modified: Mon Aug 18 17:08:23 2003 - * file: ../../mod/modreg.rmap - * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp - * last modified: Fri Feb 20 16:40:04 2004 - * - * by /n/asic/design/tools/rdesc/src/rdes2c -map -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/io_proc/rtl/guinness/iop_top.r ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap - * id: $Id: reg_map.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -typedef enum { - regi_ata = 0xb0032000, - regi_bif_core = 0xb0014000, - regi_bif_dma = 0xb0016000, - regi_bif_slave = 0xb0018000, - regi_config = 0xb003c000, - regi_dma0 = 0xb0000000, - regi_dma1 = 0xb0002000, - regi_dma2 = 0xb0004000, - regi_dma3 = 0xb0006000, - regi_dma4 = 0xb0008000, - regi_dma5 = 0xb000a000, - regi_dma6 = 0xb000c000, - regi_dma7 = 0xb000e000, - regi_dma8 = 0xb0010000, - regi_dma9 = 0xb0012000, - regi_eth0 = 0xb0034000, - regi_eth1 = 0xb0036000, - regi_gio = 0xb001a000, - regi_iop = 0xb0020000, - regi_iop_version = 0xb0020000, - regi_iop_fifo_in0_extra = 0xb0020040, - regi_iop_fifo_in1_extra = 0xb0020080, - regi_iop_fifo_out0_extra = 0xb00200c0, - regi_iop_fifo_out1_extra = 0xb0020100, - regi_iop_trigger_grp0 = 0xb0020140, - regi_iop_trigger_grp1 = 0xb0020180, - regi_iop_trigger_grp2 = 0xb00201c0, - regi_iop_trigger_grp3 = 0xb0020200, - regi_iop_trigger_grp4 = 0xb0020240, - regi_iop_trigger_grp5 = 0xb0020280, - regi_iop_trigger_grp6 = 0xb00202c0, - regi_iop_trigger_grp7 = 0xb0020300, - regi_iop_crc_par0 = 0xb0020380, - regi_iop_crc_par1 = 0xb0020400, - regi_iop_dmc_in0 = 0xb0020480, - regi_iop_dmc_in1 = 0xb0020500, - regi_iop_dmc_out0 = 0xb0020580, - regi_iop_dmc_out1 = 0xb0020600, - regi_iop_fifo_in0 = 0xb0020680, - regi_iop_fifo_in1 = 0xb0020700, - regi_iop_fifo_out0 = 0xb0020780, - regi_iop_fifo_out1 = 0xb0020800, - regi_iop_scrc_in0 = 0xb0020880, - regi_iop_scrc_in1 = 0xb0020900, - regi_iop_scrc_out0 = 0xb0020980, - regi_iop_scrc_out1 = 0xb0020a00, - regi_iop_timer_grp0 = 0xb0020a80, - regi_iop_timer_grp1 = 0xb0020b00, - regi_iop_timer_grp2 = 0xb0020b80, - regi_iop_timer_grp3 = 0xb0020c00, - regi_iop_sap_in = 0xb0020d00, - regi_iop_sap_out = 0xb0020e00, - regi_iop_spu0 = 0xb0020f00, - regi_iop_spu1 = 0xb0021000, - regi_iop_sw_cfg = 0xb0021100, - regi_iop_sw_cpu = 0xb0021200, - regi_iop_sw_mpu = 0xb0021300, - regi_iop_sw_spu0 = 0xb0021400, - regi_iop_sw_spu1 = 0xb0021500, - regi_iop_mpu = 0xb0021600, - regi_irq = 0xb001c000, - regi_irq2 = 0xb005c000, - regi_marb = 0xb003e000, - regi_marb_bp0 = 0xb003e240, - regi_marb_bp1 = 0xb003e280, - regi_marb_bp2 = 0xb003e2c0, - regi_marb_bp3 = 0xb003e300, - regi_pinmux = 0xb0038000, - regi_ser0 = 0xb0026000, - regi_ser1 = 0xb0028000, - regi_ser2 = 0xb002a000, - regi_ser3 = 0xb002c000, - regi_sser0 = 0xb0022000, - regi_sser1 = 0xb0024000, - regi_strcop = 0xb0030000, - regi_strmux = 0xb003a000, - regi_timer = 0xb001e000, - regi_timer0 = 0xb001e000, - regi_timer2 = 0xb005e000, - regi_trace = 0xb0040000, -} reg_scope_instances; -#endif /* __reg_map_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/strmux_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/strmux_defs.h deleted file mode 100644 index cbfaa867829e..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/strmux_defs.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef __strmux_defs_h -#define __strmux_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/strmux/rtl/guinness/strmux_regs.r - * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp - * last modfied: Mon Apr 11 16:09:43 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strmux_defs.h ../../inst/strmux/rtl/guinness/strmux_regs.r - * id: $Id: strmux_defs.h,v 1.1 2007/02/13 11:55:30 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope strmux */ - -/* Register rw_cfg, scope strmux, type rw */ -typedef struct { - unsigned int dma0 : 3; - unsigned int dma1 : 3; - unsigned int dma2 : 3; - unsigned int dma3 : 3; - unsigned int dma4 : 3; - unsigned int dma5 : 3; - unsigned int dma6 : 3; - unsigned int dma7 : 3; - unsigned int dma8 : 3; - unsigned int dma9 : 3; - unsigned int dummy1 : 2; -} reg_strmux_rw_cfg; -#define REG_RD_ADDR_strmux_rw_cfg 0 -#define REG_WR_ADDR_strmux_rw_cfg 0 - - -/* Constants */ -enum { - regk_strmux_ata = 0x00000003, - regk_strmux_eth0 = 0x00000001, - regk_strmux_eth1 = 0x00000004, - regk_strmux_ext0 = 0x00000001, - regk_strmux_ext1 = 0x00000001, - regk_strmux_ext2 = 0x00000001, - regk_strmux_ext3 = 0x00000001, - regk_strmux_iop0 = 0x00000002, - regk_strmux_iop1 = 0x00000001, - regk_strmux_off = 0x00000000, - regk_strmux_p21 = 0x00000004, - regk_strmux_rw_cfg_default = 0x00000000, - regk_strmux_ser0 = 0x00000002, - regk_strmux_ser1 = 0x00000002, - regk_strmux_ser2 = 0x00000004, - regk_strmux_ser3 = 0x00000003, - regk_strmux_sser0 = 0x00000003, - regk_strmux_sser1 = 0x00000003, - regk_strmux_strcop = 0x00000002 -}; -#endif /* __strmux_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/hwregs/timer_defs.h b/include/asm-cris/arch-v32/mach-fs/hwregs/timer_defs.h deleted file mode 100644 index 76bcc591921d..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/hwregs/timer_defs.h +++ /dev/null @@ -1,266 +0,0 @@ -#ifndef __timer_defs_h -#define __timer_defs_h - -/* - * This file is autogenerated from - * file: ../../inst/timer/rtl/timer_regs.r - * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp - * last modfied: Mon Apr 11 16:09:53 2005 - * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile timer_defs.h ../../inst/timer/rtl/timer_regs.r - * id: $Id: timer_defs.h,v 1.1 2007/04/11 13:51:01 ricardw Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- - */ -/* Main access macros */ -#ifndef REG_RD -#define REG_RD( scope, inst, reg ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR -#define REG_WR( scope, inst, reg, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_VECT -#define REG_RD_VECT( scope, inst, reg, index ) \ - REG_READ( reg_##scope##_##reg, \ - (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_VECT -#define REG_WR_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( reg_##scope##_##reg, \ - (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT -#define REG_RD_INT( scope, inst, reg ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT -#define REG_WR_INT( scope, inst, reg, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -#endif - -#ifndef REG_RD_INT_VECT -#define REG_RD_INT_VECT( scope, inst, reg, index ) \ - REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -#ifndef REG_WR_INT_VECT -#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ - REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg, (val) ) -#endif - -#ifndef REG_TYPE_CONV -#define REG_TYPE_CONV( type, orgtype, val ) \ - ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -#endif - -#ifndef reg_page_size -#define reg_page_size 8192 -#endif - -#ifndef REG_ADDR -#define REG_ADDR( scope, inst, reg ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg ) -#endif - -#ifndef REG_ADDR_VECT -#define REG_ADDR_VECT( scope, inst, reg, index ) \ - ( (inst) + REG_RD_ADDR_##scope##_##reg + \ - (index) * STRIDE_##scope##_##reg ) -#endif - -/* C-code for register scope timer */ - -/* Register rw_tmr0_div, scope timer, type rw */ -typedef unsigned int reg_timer_rw_tmr0_div; -#define REG_RD_ADDR_timer_rw_tmr0_div 0 -#define REG_WR_ADDR_timer_rw_tmr0_div 0 - -/* Register r_tmr0_data, scope timer, type r */ -typedef unsigned int reg_timer_r_tmr0_data; -#define REG_RD_ADDR_timer_r_tmr0_data 4 - -/* Register rw_tmr0_ctrl, scope timer, type rw */ -typedef struct { - unsigned int op : 2; - unsigned int freq : 3; - unsigned int dummy1 : 27; -} reg_timer_rw_tmr0_ctrl; -#define REG_RD_ADDR_timer_rw_tmr0_ctrl 8 -#define REG_WR_ADDR_timer_rw_tmr0_ctrl 8 - -/* Register rw_tmr1_div, scope timer, type rw */ -typedef unsigned int reg_timer_rw_tmr1_div; -#define REG_RD_ADDR_timer_rw_tmr1_div 16 -#define REG_WR_ADDR_timer_rw_tmr1_div 16 - -/* Register r_tmr1_data, scope timer, type r */ -typedef unsigned int reg_timer_r_tmr1_data; -#define REG_RD_ADDR_timer_r_tmr1_data 20 - -/* Register rw_tmr1_ctrl, scope timer, type rw */ -typedef struct { - unsigned int op : 2; - unsigned int freq : 3; - unsigned int dummy1 : 27; -} reg_timer_rw_tmr1_ctrl; -#define REG_RD_ADDR_timer_rw_tmr1_ctrl 24 -#define REG_WR_ADDR_timer_rw_tmr1_ctrl 24 - -/* Register rs_cnt_data, scope timer, type rs */ -typedef struct { - unsigned int tmr : 24; - unsigned int cnt : 8; -} reg_timer_rs_cnt_data; -#define REG_RD_ADDR_timer_rs_cnt_data 32 - -/* Register r_cnt_data, scope timer, type r */ -typedef struct { - unsigned int tmr : 24; - unsigned int cnt : 8; -} reg_timer_r_cnt_data; -#define REG_RD_ADDR_timer_r_cnt_data 36 - -/* Register rw_cnt_cfg, scope timer, type rw */ -typedef struct { - unsigned int clk : 2; - unsigned int dummy1 : 30; -} reg_timer_rw_cnt_cfg; -#define REG_RD_ADDR_timer_rw_cnt_cfg 40 -#define REG_WR_ADDR_timer_rw_cnt_cfg 40 - -/* Register rw_trig, scope timer, type rw */ -typedef unsigned int reg_timer_rw_trig; -#define REG_RD_ADDR_timer_rw_trig 48 -#define REG_WR_ADDR_timer_rw_trig 48 - -/* Register rw_trig_cfg, scope timer, type rw */ -typedef struct { - unsigned int tmr : 2; - unsigned int dummy1 : 30; -} reg_timer_rw_trig_cfg; -#define REG_RD_ADDR_timer_rw_trig_cfg 52 -#define REG_WR_ADDR_timer_rw_trig_cfg 52 - -/* Register r_time, scope timer, type r */ -typedef unsigned int reg_timer_r_time; -#define REG_RD_ADDR_timer_r_time 56 - -/* Register rw_out, scope timer, type rw */ -typedef struct { - unsigned int tmr : 2; - unsigned int dummy1 : 30; -} reg_timer_rw_out; -#define REG_RD_ADDR_timer_rw_out 60 -#define REG_WR_ADDR_timer_rw_out 60 - -/* Register rw_wd_ctrl, scope timer, type rw */ -typedef struct { - unsigned int cnt : 8; - unsigned int cmd : 1; - unsigned int key : 7; - unsigned int dummy1 : 16; -} reg_timer_rw_wd_ctrl; -#define REG_RD_ADDR_timer_rw_wd_ctrl 64 -#define REG_WR_ADDR_timer_rw_wd_ctrl 64 - -/* Register r_wd_stat, scope timer, type r */ -typedef struct { - unsigned int cnt : 8; - unsigned int cmd : 1; - unsigned int dummy1 : 23; -} reg_timer_r_wd_stat; -#define REG_RD_ADDR_timer_r_wd_stat 68 - -/* Register rw_intr_mask, scope timer, type rw */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int cnt : 1; - unsigned int trig : 1; - unsigned int dummy1 : 28; -} reg_timer_rw_intr_mask; -#define REG_RD_ADDR_timer_rw_intr_mask 72 -#define REG_WR_ADDR_timer_rw_intr_mask 72 - -/* Register rw_ack_intr, scope timer, type rw */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int cnt : 1; - unsigned int trig : 1; - unsigned int dummy1 : 28; -} reg_timer_rw_ack_intr; -#define REG_RD_ADDR_timer_rw_ack_intr 76 -#define REG_WR_ADDR_timer_rw_ack_intr 76 - -/* Register r_intr, scope timer, type r */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int cnt : 1; - unsigned int trig : 1; - unsigned int dummy1 : 28; -} reg_timer_r_intr; -#define REG_RD_ADDR_timer_r_intr 80 - -/* Register r_masked_intr, scope timer, type r */ -typedef struct { - unsigned int tmr0 : 1; - unsigned int tmr1 : 1; - unsigned int cnt : 1; - unsigned int trig : 1; - unsigned int dummy1 : 28; -} reg_timer_r_masked_intr; -#define REG_RD_ADDR_timer_r_masked_intr 84 - -/* Register rw_test, scope timer, type rw */ -typedef struct { - unsigned int dis : 1; - unsigned int en : 1; - unsigned int dummy1 : 30; -} reg_timer_rw_test; -#define REG_RD_ADDR_timer_rw_test 88 -#define REG_WR_ADDR_timer_rw_test 88 - - -/* Constants */ -enum { - regk_timer_ext = 0x00000001, - regk_timer_f100 = 0x00000007, - regk_timer_f29_493 = 0x00000004, - regk_timer_f32 = 0x00000005, - regk_timer_f32_768 = 0x00000006, - regk_timer_hold = 0x00000001, - regk_timer_ld = 0x00000000, - regk_timer_no = 0x00000000, - regk_timer_off = 0x00000000, - regk_timer_run = 0x00000002, - regk_timer_rw_cnt_cfg_default = 0x00000000, - regk_timer_rw_intr_mask_default = 0x00000000, - regk_timer_rw_out_default = 0x00000000, - regk_timer_rw_test_default = 0x00000000, - regk_timer_rw_tmr0_ctrl_default = 0x00000000, - regk_timer_rw_tmr1_ctrl_default = 0x00000000, - regk_timer_rw_trig_cfg_default = 0x00000000, - regk_timer_start = 0x00000001, - regk_timer_stop = 0x00000000, - regk_timer_time = 0x00000001, - regk_timer_tmr0 = 0x00000002, - regk_timer_tmr1 = 0x00000003, - regk_timer_yes = 0x00000001 -}; -#endif /* __timer_defs_h */ diff --git a/include/asm-cris/arch-v32/mach-fs/pinmux.h b/include/asm-cris/arch-v32/mach-fs/pinmux.h deleted file mode 100644 index c2b3036779df..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/pinmux.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_PINMUX_H -#define _ASM_CRIS_ARCH_PINMUX_H - -#define PORT_B 0 -#define PORT_C 1 -#define PORT_D 2 -#define PORT_E 3 - -enum pin_mode { - pinmux_none = 0, - pinmux_fixed, - pinmux_gpio, - pinmux_iop -}; - -enum fixed_function { - pinmux_ser1, - pinmux_ser2, - pinmux_ser3, - pinmux_sser0, - pinmux_sser1, - pinmux_ata0, - pinmux_ata1, - pinmux_ata2, - pinmux_ata3, - pinmux_ata, - pinmux_eth1, - pinmux_timer -}; - -int crisv32_pinmux_init(void); -int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode); -int crisv32_pinmux_alloc_fixed(enum fixed_function function); -int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin); -int crisv32_pinmux_dealloc_fixed(enum fixed_function function); -void crisv32_pinmux_dump(void); - -#endif diff --git a/include/asm-cris/arch-v32/mach-fs/startup.inc b/include/asm-cris/arch-v32/mach-fs/startup.inc deleted file mode 100644 index 4a10ccbd6cc1..000000000000 --- a/include/asm-cris/arch-v32/mach-fs/startup.inc +++ /dev/null @@ -1,77 +0,0 @@ -#include -#include -#include -#include - - .macro GIO_INIT - move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PA_OE, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PB_OE, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pc_dout), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PC_OE, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pc_oe), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PD_OUT, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pd_dout), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PD_OE, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pd_oe), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PE_OUT, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pe_dout), $r1 - move.d $r0, [$r1] - - move.d CONFIG_ETRAX_DEF_GIO_PE_OE, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pe_oe), $r1 - move.d $r0, [$r1] - .endm - - .macro START_CLOCKS - move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 - move.d [$r1], $r0 - or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \ - REG_STATE(config, rw_clk_ctrl, bif, yes) | \ - REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 - move.d $r0, [$r1] - .endm - - .macro SETUP_WAIT_STATES - ;; Set up waitstates etc - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r0 - move.d CONFIG_ETRAX_MEM_GRP1_CONFIG, $r1 - move.d $r1, [$r0] - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg), $r0 - move.d CONFIG_ETRAX_MEM_GRP2_CONFIG, $r1 - move.d $r1, [$r0] - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r0 - move.d CONFIG_ETRAX_MEM_GRP3_CONFIG, $r1 - move.d $r1, [$r0] - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0 - move.d CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1 - move.d $r1, [$r0] -#ifdef CONFIG_ETRAX_VCS_SIM - ;; Set up minimal flash waitstates - move.d 0, $r10 - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11 - move.d $r10, [$r11] -#endif - .endm diff --git a/include/asm-cris/arch-v32/memmap.h b/include/asm-cris/arch-v32/memmap.h deleted file mode 100644 index d29df5644d3e..000000000000 --- a/include/asm-cris/arch-v32/memmap.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _ASM_ARCH_MEMMAP_H -#define _ASM_ARCH_MEMMAP_H - -#define MEM_CSE0_START (0x00000000) -#define MEM_CSE0_SIZE (0x04000000) -#define MEM_CSE1_START (0x04000000) -#define MEM_CSE1_SIZE (0x04000000) -#define MEM_CSR0_START (0x08000000) -#define MEM_CSR1_START (0x0c000000) -#define MEM_CSP0_START (0x10000000) -#define MEM_CSP1_START (0x14000000) -#define MEM_CSP2_START (0x18000000) -#define MEM_CSP3_START (0x1c000000) -#define MEM_CSP4_START (0x20000000) -#define MEM_CSP5_START (0x24000000) -#define MEM_CSP6_START (0x28000000) -#define MEM_CSP7_START (0x2c000000) -#define MEM_INTMEM_START (0x38000000) -#define MEM_INTMEM_SIZE (0x00020000) -#define MEM_DRAM_START (0x40000000) - -#define MEM_NON_CACHEABLE (0x80000000) - -#endif diff --git a/include/asm-cris/arch-v32/mmu.h b/include/asm-cris/arch-v32/mmu.h deleted file mode 100644 index 6bcdc3fdf7dc..000000000000 --- a/include/asm-cris/arch-v32/mmu.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_MMU_H -#define _ASM_CRIS_ARCH_MMU_H - -/* MMU context type. */ -typedef struct -{ - unsigned int page_id; -} mm_context_t; - -/* Kernel memory segments. */ -#define KSEG_F 0xf0000000UL -#define KSEG_E 0xe0000000UL -#define KSEG_D 0xd0000000UL -#define KSEG_C 0xc0000000UL -#define KSEG_B 0xb0000000UL -#define KSEG_A 0xa0000000UL -#define KSEG_9 0x90000000UL -#define KSEG_8 0x80000000UL -#define KSEG_7 0x70000000UL -#define KSEG_6 0x60000000UL -#define KSEG_5 0x50000000UL -#define KSEG_4 0x40000000UL -#define KSEG_3 0x30000000UL -#define KSEG_2 0x20000000UL -#define KSEG_1 0x10000000UL -#define KSEG_0 0x00000000UL - -/* - * CRISv32 PTE bits: - * - * Bit: 31-13 12-5 4 3 2 1 0 - * +-----+------+--------+-------+--------+-------+---------+ - * | pfn | zero | global | valid | kernel | write | execute | - * +-----+------+--------+-------+--------+-------+---------+ - */ - -/* - * Defines for accessing the bits. Also define some synonyms for use with - * the software-based defined bits below. - */ -#define _PAGE_EXECUTE (1 << 0) /* Execution bit. */ -#define _PAGE_WE (1 << 1) /* Write bit. */ -#define _PAGE_SILENT_WRITE (1 << 1) /* Same as above. */ -#define _PAGE_KERNEL (1 << 2) /* Kernel mode page. */ -#define _PAGE_VALID (1 << 3) /* Page is valid. */ -#define _PAGE_SILENT_READ (1 << 3) /* Same as above. */ -#define _PAGE_GLOBAL (1 << 4) /* Global page. */ - -/* - * The hardware doesn't care about these bits, but the kernel uses them in - * software. - */ -#define _PAGE_PRESENT (1 << 5) /* Page is present in memory. */ -#define _PAGE_FILE (1 << 6) /* 1=pagecache, 0=swap (when !present) */ -#define _PAGE_ACCESSED (1 << 6) /* Simulated in software using valid bit. */ -#define _PAGE_MODIFIED (1 << 7) /* Simulated in software using we bit. */ -#define _PAGE_READ (1 << 8) /* Read enabled. */ -#define _PAGE_WRITE (1 << 9) /* Write enabled. */ - -/* Define some higher level generic page attributes. */ -#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED) -#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) - -#define _PAGE_TABLE (_PAGE_PRESENT | __READABLE | __WRITEABLE) -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED) - -#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_WRITE | \ - _PAGE_ACCESSED) -#define PAGE_SHARED_EXEC __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_WRITE | \ - _PAGE_ACCESSED | _PAGE_EXECUTE) - -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | __READABLE) -#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_EXECUTE | _PAGE_ACCESSED) - -#define PAGE_COPY __pgprot(_PAGE_PRESENT | __READABLE) -#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_EXECUTE) -#define PAGE_KERNEL __pgprot(_PAGE_GLOBAL | _PAGE_KERNEL | \ - _PAGE_PRESENT | __READABLE | __WRITEABLE) -#define PAGE_KERNEL_EXEC __pgprot(_PAGE_GLOBAL | _PAGE_KERNEL | _PAGE_EXECUTE | \ - _PAGE_PRESENT | __READABLE | __WRITEABLE) -#define PAGE_SIGNAL_TRAMPOLINE __pgprot(_PAGE_GLOBAL | _PAGE_EXECUTE | \ - _PAGE_PRESENT | __READABLE) - -#define _KERNPG_TABLE (_PAGE_TABLE | _PAGE_KERNEL) - -/* CRISv32 can do page protection for execute. - * Write permissions imply read permissions. - * Note that the numbers are in Execute-Write-Read order! - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY_EXEC -#define __P101 PAGE_READONLY_EXEC -#define __P110 PAGE_COPY_EXEC -#define __P111 PAGE_COPY_EXEC - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY_EXEC -#define __S101 PAGE_READONLY_EXEC -#define __S110 PAGE_SHARED_EXEC -#define __S111 PAGE_SHARED_EXEC - -#define PTE_FILE_MAX_BITS 25 - -#endif /* _ASM_CRIS_ARCH_MMU_H */ diff --git a/include/asm-cris/arch-v32/offset.h b/include/asm-cris/arch-v32/offset.h deleted file mode 100644 index 4442c4bd52f4..000000000000 --- a/include/asm-cris/arch-v32/offset.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef __ASM_OFFSETS_H__ -#define __ASM_OFFSETS_H__ -/* - * DO NOT MODIFY. - * - * This file was generated by arch/cris/Makefile - * - */ - -#define PT_orig_r10 0 /* offsetof(struct pt_regs, orig_r10) */ -#define PT_r13 56 /* offsetof(struct pt_regs, r13) */ -#define PT_r12 52 /* offsetof(struct pt_regs, r12) */ -#define PT_r11 48 /* offsetof(struct pt_regs, r11) */ -#define PT_r10 44 /* offsetof(struct pt_regs, r10) */ -#define PT_r9 40 /* offsetof(struct pt_regs, r9) */ -#define PT_acr 60 /* offsetof(struct pt_regs, acr) */ -#define PT_srs 64 /* offsetof(struct pt_regs, srs) */ -#define PT_mof 68 /* offsetof(struct pt_regs, mof) */ -#define PT_ccs 76 /* offsetof(struct pt_regs, ccs) */ -#define PT_srp 80 /* offsetof(struct pt_regs, srp) */ - -#define TI_task 0 /* offsetof(struct thread_info, task) */ -#define TI_flags 8 /* offsetof(struct thread_info, flags) */ -#define TI_preempt_count 16 /* offsetof(struct thread_info, preempt_count) */ - -#define THREAD_ksp 0 /* offsetof(struct thread_struct, ksp) */ -#define THREAD_usp 4 /* offsetof(struct thread_struct, usp) */ -#define THREAD_ccs 8 /* offsetof(struct thread_struct, ccs) */ - -#define TASK_pid 151 /* offsetof(struct task_struct, pid) */ - -#define LCLONE_VM 256 /* CLONE_VM */ -#define LCLONE_UNTRACED 8388608 /* CLONE_UNTRACED */ - -#endif diff --git a/include/asm-cris/arch-v32/page.h b/include/asm-cris/arch-v32/page.h deleted file mode 100644 index 20f1b4806bfe..000000000000 --- a/include/asm-cris/arch-v32/page.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_PAGE_H -#define _ASM_CRIS_ARCH_PAGE_H - - -#ifdef __KERNEL__ - -#define PAGE_OFFSET KSEG_C /* kseg_c is mapped to physical ram. */ - -/* - * Macros to convert between physical and virtual addresses. By stripping a - * selected bit it's possible to convert between KSEG_x and 0x40000000 where the - * DRAM really resides. DRAM is virtually at 0xc. - */ -#ifndef CONFIG_ETRAX_VCS_SIM -#define __pa(x) ((unsigned long)(x) & 0x7fffffff) -#define __va(x) ((void *)((unsigned long)(x) | 0x80000000)) -#else -#define __pa(x) ((unsigned long)(x) & 0x3fffffff) -#define __va(x) ((void *)((unsigned long)(x) | 0xc0000000)) -#endif - -#define VM_STACK_DEFAULT_FLAGS (VM_READ | VM_WRITE | \ - VM_MAYREAD | VM_MAYWRITE) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_CRIS_ARCH_PAGE_H */ diff --git a/include/asm-cris/arch-v32/pgtable.h b/include/asm-cris/arch-v32/pgtable.h deleted file mode 100644 index 08cb7ff7e4e7..000000000000 --- a/include/asm-cris/arch-v32/pgtable.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_PGTABLE_H -#define _ASM_CRIS_ARCH_PGTABLE_H - -/* Define the kernels virtual memory area. */ -#define VMALLOC_START KSEG_D -#define VMALLOC_END KSEG_E -#define VMALLOC_VMADDR(x) ((unsigned long)(x)) - -#endif /* _ASM_CRIS_ARCH_PGTABLE_H */ diff --git a/include/asm-cris/arch-v32/pinmux.h b/include/asm-cris/arch-v32/pinmux.h deleted file mode 100644 index bb09bce42e7a..000000000000 --- a/include/asm-cris/arch-v32/pinmux.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_PINMUX_H -#define _ASM_CRIS_ARCH_PINMUX_H - -#define PORT_B 0 -#define PORT_C 1 -#define PORT_D 2 -#define PORT_E 3 - -enum pin_mode -{ - pinmux_none = 0, - pinmux_fixed, - pinmux_gpio, - pinmux_iop -}; - -enum fixed_function -{ - pinmux_ser1, - pinmux_ser2, - pinmux_ser3, - pinmux_sser0, - pinmux_sser1, - pinmux_ata0, - pinmux_ata1, - pinmux_ata2, - pinmux_ata3, - pinmux_ata, - pinmux_eth1, - pinmux_timer -}; - -int crisv32_pinmux_init(void); -int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode); -int crisv32_pinmux_alloc_fixed(enum fixed_function function); -int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin); -int crisv32_pinmux_dealloc_fixed(enum fixed_function function); -void crisv32_pinmux_dump(void); - -#endif diff --git a/include/asm-cris/arch-v32/processor.h b/include/asm-cris/arch-v32/processor.h deleted file mode 100644 index f80b47790ca6..000000000000 --- a/include/asm-cris/arch-v32/processor.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_PROCESSOR_H -#define _ASM_CRIS_ARCH_PROCESSOR_H - - -/* Return current instruction pointer. */ -#define current_text_addr() \ - ({void *pc; __asm__ __volatile__ ("lapcq .,%0" : "=rm" (pc)); pc;}) - -/* - * Since CRIS doesn't do hardware task-switching this hasn't really anything to - * do with the proccessor itself, it's just here for legacy reasons. This is - * used when task-switching using _resume defined in entry.S. The offsets here - * are hardcoded into _resume, so if this struct is changed, entry.S needs to be - * changed as well. - */ -struct thread_struct { - unsigned long ksp; /* Kernel stack pointer. */ - unsigned long usp; /* User stack pointer. */ - unsigned long ccs; /* Saved flags register. */ -}; - -/* - * User-space process size. This is hardcoded into a few places, so don't - * changed it unless everything's clear! - */ -#ifndef CONFIG_ETRAX_VCS_SIM -#define TASK_SIZE (0xB0000000UL) -#else -#define TASK_SIZE (0xA0000000UL) -#endif - -/* CCS I=1, enable interrupts. */ -#define INIT_THREAD { 0, 0, (1 << I_CCS_BITNR) } - -#define KSTK_EIP(tsk) \ -({ \ - unsigned long eip = 0; \ - unsigned long regs = (unsigned long)task_pt_regs(tsk); \ - if (regs > PAGE_SIZE && virt_addr_valid(regs)) \ - eip = ((struct pt_regs *)regs)->erp; \ - eip; \ -}) - -/* - * Give the thread a program location, set user-mode and switch user - * stackpointer. - */ -#define start_thread(regs, ip, usp) \ -do { \ - set_fs(USER_DS); \ - regs->erp = ip; \ - regs->ccs |= 1 << (U_CCS_BITNR + CCS_SHIFT); \ - wrusp(usp); \ -} while(0) - -/* Nothing special to do for v32 when handling a kernel bus fault fixup. */ -#define arch_fixup(regs) {}; - -#endif /* _ASM_CRIS_ARCH_PROCESSOR_H */ diff --git a/include/asm-cris/arch-v32/ptrace.h b/include/asm-cris/arch-v32/ptrace.h deleted file mode 100644 index 41f4e8662bc2..000000000000 --- a/include/asm-cris/arch-v32/ptrace.h +++ /dev/null @@ -1,118 +0,0 @@ -#ifndef _CRIS_ARCH_PTRACE_H -#define _CRIS_ARCH_PTRACE_H - -/* Register numbers in the ptrace system call interface */ - -#define PT_ORIG_R10 0 -#define PT_R0 1 -#define PT_R1 2 -#define PT_R2 3 -#define PT_R3 4 -#define PT_R4 5 -#define PT_R5 6 -#define PT_R6 7 -#define PT_R7 8 -#define PT_R8 9 -#define PT_R9 10 -#define PT_R10 11 -#define PT_R11 12 -#define PT_R12 13 -#define PT_R13 14 -#define PT_ACR 15 -#define PT_SRS 16 -#define PT_MOF 17 -#define PT_SPC 18 -#define PT_CCS 19 -#define PT_SRP 20 -#define PT_ERP 21 /* This is actually the debugged process' PC */ -#define PT_EXS 22 -#define PT_EDA 23 -#define PT_USP 24 /* special case - USP is not in the pt_regs */ -#define PT_PPC 25 /* special case - pseudo PC */ -#define PT_BP 26 /* Base number for BP registers. */ -#define PT_BP_CTRL 26 /* BP control register. */ -#define PT_MAX 40 - -/* Condition code bit numbers. */ -#define C_CCS_BITNR 0 -#define V_CCS_BITNR 1 -#define Z_CCS_BITNR 2 -#define N_CCS_BITNR 3 -#define X_CCS_BITNR 4 -#define I_CCS_BITNR 5 -#define U_CCS_BITNR 6 -#define P_CCS_BITNR 7 -#define R_CCS_BITNR 8 -#define S_CCS_BITNR 9 -#define M_CCS_BITNR 30 -#define Q_CCS_BITNR 31 -#define CCS_SHIFT 10 /* Shift count for each level in CCS */ - -/* pt_regs not only specifices the format in the user-struct during - * ptrace but is also the frame format used in the kernel prologue/epilogues - * themselves - */ - -struct pt_regs { - unsigned long orig_r10; - /* pushed by movem r13, [sp] in SAVE_ALL. */ - unsigned long r0; - unsigned long r1; - unsigned long r2; - unsigned long r3; - unsigned long r4; - unsigned long r5; - unsigned long r6; - unsigned long r7; - unsigned long r8; - unsigned long r9; - unsigned long r10; - unsigned long r11; - unsigned long r12; - unsigned long r13; - unsigned long acr; - unsigned long srs; - unsigned long mof; - unsigned long spc; - unsigned long ccs; - unsigned long srp; - unsigned long erp; /* This is actually the debugged process' PC */ - /* For debugging purposes; saved only when needed. */ - unsigned long exs; - unsigned long eda; -}; - -/* switch_stack is the extra stuff pushed onto the stack in _resume (entry.S) - * when doing a context-switch. it is used (apart from in resume) when a new - * thread is made and we need to make _resume (which is starting it for the - * first time) realise what is going on. - * - * Actually, the use is very close to the thread struct (TSS) in that both the - * switch_stack and the TSS are used to keep thread stuff when switching in - * _resume. - */ - -struct switch_stack { - unsigned long r0; - unsigned long r1; - unsigned long r2; - unsigned long r3; - unsigned long r4; - unsigned long r5; - unsigned long r6; - unsigned long r7; - unsigned long r8; - unsigned long r9; - unsigned long return_ip; /* ip that _resume will return to */ -}; - -#ifdef __KERNEL__ - -#define user_mode(regs) (((regs)->ccs & (1 << (U_CCS_BITNR + CCS_SHIFT))) != 0) -#define instruction_pointer(regs) ((regs)->erp) -extern void show_regs(struct pt_regs *); -#define profile_pc(regs) instruction_pointer(regs) - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-cris/arch-v32/spinlock.h b/include/asm-cris/arch-v32/spinlock.h deleted file mode 100644 index 0d5709b983a1..000000000000 --- a/include/asm-cris/arch-v32/spinlock.h +++ /dev/null @@ -1,129 +0,0 @@ -#ifndef __ASM_ARCH_SPINLOCK_H -#define __ASM_ARCH_SPINLOCK_H - -#include - -#define RW_LOCK_BIAS 0x01000000 - -extern void cris_spin_unlock(void *l, int val); -extern void cris_spin_lock(void *l); -extern int cris_spin_trylock(void *l); - -static inline int __raw_spin_is_locked(raw_spinlock_t *x) -{ - return *(volatile signed char *)(&(x)->slock) <= 0; -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - __asm__ volatile ("move.d %1,%0" \ - : "=m" (lock->slock) \ - : "r" (1) \ - : "memory"); -} - -static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) -{ - while (__raw_spin_is_locked(lock)) - cpu_relax(); -} - -static inline int __raw_spin_trylock(raw_spinlock_t *lock) -{ - return cris_spin_trylock((void *)&lock->slock); -} - -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - cris_spin_lock((void *)&lock->slock); -} - -static inline void -__raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) -{ - __raw_spin_lock(lock); -} - -/* - * Read-write spinlocks, allowing multiple readers - * but only one writer. - * - * NOTE! it is quite common to have readers in interrupts - * but no interrupt writers. For those circumstances we - * can "mix" irq-safe locks - any writer needs to get a - * irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - * - */ - -static inline int __raw_read_can_lock(raw_rwlock_t *x) -{ - return (int)(x)->lock > 0; -} - -static inline int __raw_write_can_lock(raw_rwlock_t *x) -{ - return (x)->lock == RW_LOCK_BIAS; -} - -static inline void __raw_read_lock(raw_rwlock_t *rw) -{ - __raw_spin_lock(&rw->slock); - while (rw->lock == 0); - rw->lock--; - __raw_spin_unlock(&rw->slock); -} - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - __raw_spin_lock(&rw->slock); - while (rw->lock != RW_LOCK_BIAS); - rw->lock == 0; - __raw_spin_unlock(&rw->slock); -} - -static inline void __raw_read_unlock(raw_rwlock_t *rw) -{ - __raw_spin_lock(&rw->slock); - rw->lock++; - __raw_spin_unlock(&rw->slock); -} - -static inline void __raw_write_unlock(raw_rwlock_t *rw) -{ - __raw_spin_lock(&rw->slock); - while (rw->lock != RW_LOCK_BIAS); - rw->lock == RW_LOCK_BIAS; - __raw_spin_unlock(&rw->slock); -} - -static inline int __raw_read_trylock(raw_rwlock_t *rw) -{ - int ret = 0; - __raw_spin_lock(&rw->slock); - if (rw->lock != 0) { - rw->lock--; - ret = 1; - } - __raw_spin_unlock(&rw->slock); - return ret; -} - -static inline int __raw_write_trylock(raw_rwlock_t *rw) -{ - int ret = 0; - __raw_spin_lock(&rw->slock); - if (rw->lock == RW_LOCK_BIAS) { - rw->lock == 0; - ret = 1; - } - __raw_spin_unlock(&rw->slock); - return 1; -} - - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* __ASM_ARCH_SPINLOCK_H */ diff --git a/include/asm-cris/arch-v32/system.h b/include/asm-cris/arch-v32/system.h deleted file mode 100644 index 6ca90f1f110a..000000000000 --- a/include/asm-cris/arch-v32/system.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_SYSTEM_H -#define _ASM_CRIS_ARCH_SYSTEM_H - - -/* Read the CPU version register. */ -static inline unsigned long rdvr(void) -{ - unsigned char vr; - - __asm__ __volatile__ ("move $vr, %0" : "=rm" (vr)); - return vr; -} - -#define cris_machine_name "crisv32" - -/* Read the user-mode stack pointer. */ -static inline unsigned long rdusp(void) -{ - unsigned long usp; - - __asm__ __volatile__ ("move $usp, %0" : "=rm" (usp)); - return usp; -} - -/* Read the current stack pointer. */ -static inline unsigned long rdsp(void) -{ - unsigned long sp; - - __asm__ __volatile__ ("move.d $sp, %0" : "=rm" (sp)); - return sp; -} - -/* Write the user-mode stack pointer. */ -#define wrusp(usp) __asm__ __volatile__ ("move %0, $usp" : : "rm" (usp)) - -#define nop() __asm__ __volatile__ ("nop"); - -#define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long) (x),(ptr),sizeof(*(ptr)))) - -#define tas(ptr) (xchg((ptr),1)) - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((struct __xchg_dummy *)(x)) - -/* Used for interrupt control. */ -#define local_save_flags(x) \ - __asm__ __volatile__ ("move $ccs, %0" : "=rm" (x) : : "memory"); - -#define local_irq_restore(x) \ - __asm__ __volatile__ ("move %0, $ccs" : : "rm" (x) : "memory"); - -#define local_irq_disable() __asm__ __volatile__ ("di" : : : "memory"); -#define local_irq_enable() __asm__ __volatile__ ("ei" : : : "memory"); - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - \ - local_save_flags(flags);\ - !(flags & (1 << I_CCS_BITNR)); \ -}) - -/* Used for spinlocks, etc. */ -#define local_irq_save(x) \ - __asm__ __volatile__ ("move $ccs, %0\n\tdi" : "=rm" (x) : : "memory"); - -#endif /* _ASM_CRIS_ARCH_SYSTEM_H */ diff --git a/include/asm-cris/arch-v32/thread_info.h b/include/asm-cris/arch-v32/thread_info.h deleted file mode 100644 index d6936956a3c6..000000000000 --- a/include/asm-cris/arch-v32/thread_info.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_THREAD_INFO_H -#define _ASM_CRIS_ARCH_THREAD_INFO_H - -/* Return a thread_info struct. */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - - __asm__ __volatile__ ("and.d $sp, %0" : "=r" (ti) : "0" (~8191UL)); - return ti; -} - -#endif /* _ASM_CRIS_ARCH_THREAD_INFO_H */ diff --git a/include/asm-cris/arch-v32/timex.h b/include/asm-cris/arch-v32/timex.h deleted file mode 100644 index 2591d3c5ed9d..000000000000 --- a/include/asm-cris/arch-v32/timex.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_TIMEX_H -#define _ASM_CRIS_ARCH_TIMEX_H - -#include -#include -#include - -/* - * The clock runs at 100MHz, we divide it by 1000000. If you change anything - * here you must check time.c as well. - */ - -#define CLOCK_TICK_RATE 100000000 /* Underlying frequency of the HZ timer */ - -/* The timer0 values gives 10 ns resolution but interrupts at HZ. */ -#define TIMER0_FREQ (CLOCK_TICK_RATE) -#define TIMER0_DIV (TIMER0_FREQ/(HZ)) - -/* Convert the value in step of 10 ns to 1us without overflow: */ -#define GET_JIFFIES_USEC() \ - ((TIMER0_DIV - REG_RD(timer, regi_timer0, r_tmr0_data)) / 100) - -extern unsigned long get_ns_in_jiffie(void); - -static inline unsigned long get_us_in_jiffie_highres(void) -{ - return get_ns_in_jiffie() / 1000; -} - -#endif - diff --git a/include/asm-cris/arch-v32/tlb.h b/include/asm-cris/arch-v32/tlb.h deleted file mode 100644 index 4effb1253660..000000000000 --- a/include/asm-cris/arch-v32/tlb.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _CRIS_ARCH_TLB_H -#define _CRIS_ARCH_TLB_H - -/* - * The TLB is a 64-entry cache. Each entry has a 8-bit page_id that is used - * to store the "process" it belongs to (=> fast mm context switch). The - * last page_id is never used so we can make TLB entries that never matches. - */ -#define NUM_TLB_ENTRIES 64 -#define NUM_PAGEID 256 -#define INVALID_PAGEID 255 -#define NO_CONTEXT -1 - -#endif /* _CRIS_ARCH_TLB_H */ diff --git a/include/asm-cris/arch-v32/uaccess.h b/include/asm-cris/arch-v32/uaccess.h deleted file mode 100644 index 6b207f1b6622..000000000000 --- a/include/asm-cris/arch-v32/uaccess.h +++ /dev/null @@ -1,748 +0,0 @@ -/* - * Authors: Hans-Peter Nilsson (hp@axis.com) - * - */ -#ifndef _CRIS_ARCH_UACCESS_H -#define _CRIS_ARCH_UACCESS_H - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - * - * Note that PC at a fault is the address *at* the faulting - * instruction for CRISv32. - */ -#define __put_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "2: "op" %1,[%2]\n" \ - "4:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: move.d %3,%0\n" \ - " jump 4b\n" \ - " nop\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .dword 2b,3b\n" \ - " .previous\n" \ - : "=r" (err) \ - : "r" (x), "r" (addr), "g" (-EFAULT), "0" (err)) - -#define __put_user_asm_64(x, addr, err) do { \ - int dummy_for_put_user_asm_64_; \ - __asm__ __volatile__( \ - "2: move.d %M2,[%1+]\n" \ - "4: move.d %H2,[%1]\n" \ - "5:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: move.d %4,%0\n" \ - " jump 5b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .dword 2b,3b\n" \ - " .dword 4b,3b\n" \ - " .previous\n" \ - : "=r" (err), "=b" (dummy_for_put_user_asm_64_) \ - : "r" (x), "1" (addr), "g" (-EFAULT), \ - "0" (err)); \ - } while (0) - -/* See comment before __put_user_asm. */ - -#define __get_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "2: "op" [%2],%1\n" \ - "4:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: move.d %3,%0\n" \ - " jump 4b\n" \ - " moveq 0,%1\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .dword 2b,3b\n" \ - " .previous\n" \ - : "=r" (err), "=r" (x) \ - : "r" (addr), "g" (-EFAULT), "0" (err)) - -#define __get_user_asm_64(x, addr, err) do { \ - int dummy_for_get_user_asm_64_; \ - __asm__ __volatile__( \ - "2: move.d [%2+],%M1\n" \ - "4: move.d [%2],%H1\n" \ - "5:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: move.d %4,%0\n" \ - " jump 5b\n" \ - " moveq 0,%1\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .dword 2b,3b\n" \ - " .dword 4b,3b\n" \ - " .previous\n" \ - : "=r" (err), "=r" (x), \ - "=b" (dummy_for_get_user_asm_64_) \ - : "2" (addr), "g" (-EFAULT), "0" (err));\ - } while (0) - -/* - * Copy a null terminated string from userspace. - * - * Must return: - * -EFAULT for an exception - * count if we hit the buffer limit - * bytes copied if we hit a null byte - * (without the null byte) - */ -static inline long -__do_strncpy_from_user(char *dst, const char *src, long count) -{ - long res; - - if (count == 0) - return 0; - - /* - * Currently, in 2.4.0-test9, most ports use a simple byte-copy loop. - * So do we. - * - * This code is deduced from: - * - * char tmp2; - * long tmp1, tmp3; - * tmp1 = count; - * while ((*dst++ = (tmp2 = *src++)) != 0 - * && --tmp1) - * ; - * - * res = count - tmp1; - * - * with tweaks. - */ - - __asm__ __volatile__ ( - " move.d %3,%0\n" - "5: move.b [%2+],$acr\n" - "1: beq 2f\n" - " move.b $acr,[%1+]\n" - - " subq 1,%0\n" - "2: bne 1b\n" - " move.b [%2+],$acr\n" - - " sub.d %3,%0\n" - " neg.d %0,%0\n" - "3:\n" - " .section .fixup,\"ax\"\n" - "4: move.d %7,%0\n" - " jump 3b\n" - " nop\n" - - /* The address for a fault at the first move is trivial. - The address for a fault at the second move is that of - the preceding branch insn, since the move insn is in - its delay-slot. That address is also a branch - target. Just so you don't get confused... */ - " .previous\n" - " .section __ex_table,\"a\"\n" - " .dword 5b,4b\n" - " .dword 2b,4b\n" - " .previous" - : "=r" (res), "=b" (dst), "=b" (src), "=r" (count) - : "3" (count), "1" (dst), "2" (src), "g" (-EFAULT) - : "acr"); - - return res; -} - -/* A few copy asms to build up the more complex ones from. - - Note again, a post-increment is performed regardless of whether a bus - fault occurred in that instruction, and PC for a faulted insn is the - address for the insn, or for the preceding branch when in a delay-slot. */ - -#define __asm_copy_user_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm__ __volatile__ ( \ - COPY \ - "1:\n" \ - " .section .fixup,\"ax\"\n" \ - FIXUP \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - TENTRY \ - " .previous\n" \ - : "=b" (to), "=b" (from), "=r" (ret) \ - : "0" (to), "1" (from), "2" (ret) \ - : "acr", "memory") - -#define __asm_copy_from_user_1(to, from, ret) \ - __asm_copy_user_cont(to, from, ret, \ - "2: move.b [%1+],$acr\n" \ - " move.b $acr,[%0+]\n", \ - "3: addq 1,%2\n" \ - " jump 1b\n" \ - " clear.b [%0+]\n", \ - " .dword 2b,3b\n") - -#define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_user_cont(to, from, ret, \ - COPY \ - "2: move.w [%1+],$acr\n" \ - " move.w $acr,[%0+]\n", \ - FIXUP \ - "3: addq 2,%2\n" \ - " jump 1b\n" \ - " clear.w [%0+]\n", \ - TENTRY \ - " .dword 2b,3b\n") - -#define __asm_copy_from_user_2(to, from, ret) \ - __asm_copy_from_user_2x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_3(to, from, ret) \ - __asm_copy_from_user_2x_cont(to, from, ret, \ - "4: move.b [%1+],$acr\n" \ - " move.b $acr,[%0+]\n", \ - "5: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 4b,5b\n") - -#define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_user_cont(to, from, ret, \ - COPY \ - "2: move.d [%1+],$acr\n" \ - " move.d $acr,[%0+]\n", \ - FIXUP \ - "3: addq 4,%2\n" \ - " jump 1b\n" \ - " clear.d [%0+]\n", \ - TENTRY \ - " .dword 2b,3b\n") - -#define __asm_copy_from_user_4(to, from, ret) \ - __asm_copy_from_user_4x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_5(to, from, ret) \ - __asm_copy_from_user_4x_cont(to, from, ret, \ - "4: move.b [%1+],$acr\n" \ - " move.b $acr,[%0+]\n", \ - "5: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 4b,5b\n") - -#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_4x_cont(to, from, ret, \ - COPY \ - "4: move.w [%1+],$acr\n" \ - " move.w $acr,[%0+]\n", \ - FIXUP \ - "5: addq 2,%2\n" \ - " clear.w [%0+]\n", \ - TENTRY \ - " .dword 4b,5b\n") - -#define __asm_copy_from_user_6(to, from, ret) \ - __asm_copy_from_user_6x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_7(to, from, ret) \ - __asm_copy_from_user_6x_cont(to, from, ret, \ - "6: move.b [%1+],$acr\n" \ - " move.b $acr,[%0+]\n", \ - "7: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 6b,7b\n") - -#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_4x_cont(to, from, ret, \ - COPY \ - "4: move.d [%1+],$acr\n" \ - " move.d $acr,[%0+]\n", \ - FIXUP \ - "5: addq 4,%2\n" \ - " clear.d [%0+]\n", \ - TENTRY \ - " .dword 4b,5b\n") - -#define __asm_copy_from_user_8(to, from, ret) \ - __asm_copy_from_user_8x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_9(to, from, ret) \ - __asm_copy_from_user_8x_cont(to, from, ret, \ - "6: move.b [%1+],$acr\n" \ - " move.b $acr,[%0+]\n", \ - "7: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 6b,7b\n") - -#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_8x_cont(to, from, ret, \ - COPY \ - "6: move.w [%1+],$acr\n" \ - " move.w $acr,[%0+]\n", \ - FIXUP \ - "7: addq 2,%2\n" \ - " clear.w [%0+]\n", \ - TENTRY \ - " .dword 6b,7b\n") - -#define __asm_copy_from_user_10(to, from, ret) \ - __asm_copy_from_user_10x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_11(to, from, ret) \ - __asm_copy_from_user_10x_cont(to, from, ret, \ - "8: move.b [%1+],$acr\n" \ - " move.b $acr,[%0+]\n", \ - "9: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 8b,9b\n") - -#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_8x_cont(to, from, ret, \ - COPY \ - "6: move.d [%1+],$acr\n" \ - " move.d $acr,[%0+]\n", \ - FIXUP \ - "7: addq 4,%2\n" \ - " clear.d [%0+]\n", \ - TENTRY \ - " .dword 6b,7b\n") - -#define __asm_copy_from_user_12(to, from, ret) \ - __asm_copy_from_user_12x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_13(to, from, ret) \ - __asm_copy_from_user_12x_cont(to, from, ret, \ - "8: move.b [%1+],$acr\n" \ - " move.b $acr,[%0+]\n", \ - "9: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 8b,9b\n") - -#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_12x_cont(to, from, ret, \ - COPY \ - "8: move.w [%1+],$acr\n" \ - " move.w $acr,[%0+]\n", \ - FIXUP \ - "9: addq 2,%2\n" \ - " clear.w [%0+]\n", \ - TENTRY \ - " .dword 8b,9b\n") - -#define __asm_copy_from_user_14(to, from, ret) \ - __asm_copy_from_user_14x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_15(to, from, ret) \ - __asm_copy_from_user_14x_cont(to, from, ret, \ - "10: move.b [%1+],$acr\n" \ - " move.b $acr,[%0+]\n", \ - "11: addq 1,%2\n" \ - " clear.b [%0+]\n", \ - " .dword 10b,11b\n") - -#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_12x_cont(to, from, ret, \ - COPY \ - "8: move.d [%1+],$acr\n" \ - " move.d $acr,[%0+]\n", \ - FIXUP \ - "9: addq 4,%2\n" \ - " clear.d [%0+]\n", \ - TENTRY \ - " .dword 8b,9b\n") - -#define __asm_copy_from_user_16(to, from, ret) \ - __asm_copy_from_user_16x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_16x_cont(to, from, ret, \ - COPY \ - "10: move.d [%1+],$acr\n" \ - " move.d $acr,[%0+]\n", \ - FIXUP \ - "11: addq 4,%2\n" \ - " clear.d [%0+]\n", \ - TENTRY \ - " .dword 10b,11b\n") - -#define __asm_copy_from_user_20(to, from, ret) \ - __asm_copy_from_user_20x_cont(to, from, ret, "", "", "") - -#define __asm_copy_from_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_from_user_20x_cont(to, from, ret, \ - COPY \ - "12: move.d [%1+],$acr\n" \ - " move.d $acr,[%0+]\n", \ - FIXUP \ - "13: addq 4,%2\n" \ - " clear.d [%0+]\n", \ - TENTRY \ - " .dword 12b,13b\n") - -#define __asm_copy_from_user_24(to, from, ret) \ - __asm_copy_from_user_24x_cont(to, from, ret, "", "", "") - -/* And now, the to-user ones. */ - -#define __asm_copy_to_user_1(to, from, ret) \ - __asm_copy_user_cont(to, from, ret, \ - " move.b [%1+],$acr\n" \ - "2: move.b $acr,[%0+]\n", \ - "3: jump 1b\n" \ - " addq 1,%2\n", \ - " .dword 2b,3b\n") - -#define __asm_copy_to_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_user_cont(to, from, ret, \ - COPY \ - " move.w [%1+],$acr\n" \ - "2: move.w $acr,[%0+]\n", \ - FIXUP \ - "3: jump 1b\n" \ - " addq 2,%2\n", \ - TENTRY \ - " .dword 2b,3b\n") - -#define __asm_copy_to_user_2(to, from, ret) \ - __asm_copy_to_user_2x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_3(to, from, ret) \ - __asm_copy_to_user_2x_cont(to, from, ret, \ - " move.b [%1+],$acr\n" \ - "4: move.b $acr,[%0+]\n", \ - "5: addq 1,%2\n", \ - " .dword 4b,5b\n") - -#define __asm_copy_to_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_user_cont(to, from, ret, \ - COPY \ - " move.d [%1+],$acr\n" \ - "2: move.d $acr,[%0+]\n", \ - FIXUP \ - "3: jump 1b\n" \ - " addq 4,%2\n", \ - TENTRY \ - " .dword 2b,3b\n") - -#define __asm_copy_to_user_4(to, from, ret) \ - __asm_copy_to_user_4x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_5(to, from, ret) \ - __asm_copy_to_user_4x_cont(to, from, ret, \ - " move.b [%1+],$acr\n" \ - "4: move.b $acr,[%0+]\n", \ - "5: addq 1,%2\n", \ - " .dword 4b,5b\n") - -#define __asm_copy_to_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_4x_cont(to, from, ret, \ - COPY \ - " move.w [%1+],$acr\n" \ - "4: move.w $acr,[%0+]\n", \ - FIXUP \ - "5: addq 2,%2\n", \ - TENTRY \ - " .dword 4b,5b\n") - -#define __asm_copy_to_user_6(to, from, ret) \ - __asm_copy_to_user_6x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_7(to, from, ret) \ - __asm_copy_to_user_6x_cont(to, from, ret, \ - " move.b [%1+],$acr\n" \ - "6: move.b $acr,[%0+]\n", \ - "7: addq 1,%2\n", \ - " .dword 6b,7b\n") - -#define __asm_copy_to_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_4x_cont(to, from, ret, \ - COPY \ - " move.d [%1+],$acr\n" \ - "4: move.d $acr,[%0+]\n", \ - FIXUP \ - "5: addq 4,%2\n", \ - TENTRY \ - " .dword 4b,5b\n") - -#define __asm_copy_to_user_8(to, from, ret) \ - __asm_copy_to_user_8x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_9(to, from, ret) \ - __asm_copy_to_user_8x_cont(to, from, ret, \ - " move.b [%1+],$acr\n" \ - "6: move.b $acr,[%0+]\n", \ - "7: addq 1,%2\n", \ - " .dword 6b,7b\n") - -#define __asm_copy_to_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_8x_cont(to, from, ret, \ - COPY \ - " move.w [%1+],$acr\n" \ - "6: move.w $acr,[%0+]\n", \ - FIXUP \ - "7: addq 2,%2\n", \ - TENTRY \ - " .dword 6b,7b\n") - -#define __asm_copy_to_user_10(to, from, ret) \ - __asm_copy_to_user_10x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_11(to, from, ret) \ - __asm_copy_to_user_10x_cont(to, from, ret, \ - " move.b [%1+],$acr\n" \ - "8: move.b $acr,[%0+]\n", \ - "9: addq 1,%2\n", \ - " .dword 8b,9b\n") - -#define __asm_copy_to_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_8x_cont(to, from, ret, \ - COPY \ - " move.d [%1+],$acr\n" \ - "6: move.d $acr,[%0+]\n", \ - FIXUP \ - "7: addq 4,%2\n", \ - TENTRY \ - " .dword 6b,7b\n") - -#define __asm_copy_to_user_12(to, from, ret) \ - __asm_copy_to_user_12x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_13(to, from, ret) \ - __asm_copy_to_user_12x_cont(to, from, ret, \ - " move.b [%1+],$acr\n" \ - "8: move.b $acr,[%0+]\n", \ - "9: addq 1,%2\n", \ - " .dword 8b,9b\n") - -#define __asm_copy_to_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_12x_cont(to, from, ret, \ - COPY \ - " move.w [%1+],$acr\n" \ - "8: move.w $acr,[%0+]\n", \ - FIXUP \ - "9: addq 2,%2\n", \ - TENTRY \ - " .dword 8b,9b\n") - -#define __asm_copy_to_user_14(to, from, ret) \ - __asm_copy_to_user_14x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_15(to, from, ret) \ - __asm_copy_to_user_14x_cont(to, from, ret, \ - " move.b [%1+],$acr\n" \ - "10: move.b $acr,[%0+]\n", \ - "11: addq 1,%2\n", \ - " .dword 10b,11b\n") - -#define __asm_copy_to_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_12x_cont(to, from, ret, \ - COPY \ - " move.d [%1+],$acr\n" \ - "8: move.d $acr,[%0+]\n", \ - FIXUP \ - "9: addq 4,%2\n", \ - TENTRY \ - " .dword 8b,9b\n") - -#define __asm_copy_to_user_16(to, from, ret) \ - __asm_copy_to_user_16x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_16x_cont(to, from, ret, \ - COPY \ - " move.d [%1+],$acr\n" \ - "10: move.d $acr,[%0+]\n", \ - FIXUP \ - "11: addq 4,%2\n", \ - TENTRY \ - " .dword 10b,11b\n") - -#define __asm_copy_to_user_20(to, from, ret) \ - __asm_copy_to_user_20x_cont(to, from, ret, "", "", "") - -#define __asm_copy_to_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \ - __asm_copy_to_user_20x_cont(to, from, ret, \ - COPY \ - " move.d [%1+],$acr\n" \ - "12: move.d $acr,[%0+]\n", \ - FIXUP \ - "13: addq 4,%2\n", \ - TENTRY \ - " .dword 12b,13b\n") - -#define __asm_copy_to_user_24(to, from, ret) \ - __asm_copy_to_user_24x_cont(to, from, ret, "", "", "") - -/* Define a few clearing asms with exception handlers. */ - -/* This frame-asm is like the __asm_copy_user_cont one, but has one less - input. */ - -#define __asm_clear(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm__ __volatile__ ( \ - CLEAR \ - "1:\n" \ - " .section .fixup,\"ax\"\n" \ - FIXUP \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - TENTRY \ - " .previous" \ - : "=b" (to), "=r" (ret) \ - : "0" (to), "1" (ret) \ - : "memory") - -#define __asm_clear_1(to, ret) \ - __asm_clear(to, ret, \ - "2: clear.b [%0+]\n", \ - "3: jump 1b\n" \ - " addq 1,%1\n", \ - " .dword 2b,3b\n") - -#define __asm_clear_2(to, ret) \ - __asm_clear(to, ret, \ - "2: clear.w [%0+]\n", \ - "3: jump 1b\n" \ - " addq 2,%1\n", \ - " .dword 2b,3b\n") - -#define __asm_clear_3(to, ret) \ - __asm_clear(to, ret, \ - "2: clear.w [%0+]\n" \ - "3: clear.b [%0+]\n", \ - "4: addq 2,%1\n" \ - "5: jump 1b\n" \ - " addq 1,%1\n", \ - " .dword 2b,4b\n" \ - " .dword 3b,5b\n") - -#define __asm_clear_4x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear(to, ret, \ - CLEAR \ - "2: clear.d [%0+]\n", \ - FIXUP \ - "3: jump 1b\n" \ - " addq 4,%1\n", \ - TENTRY \ - " .dword 2b,3b\n") - -#define __asm_clear_4(to, ret) \ - __asm_clear_4x_cont(to, ret, "", "", "") - -#define __asm_clear_8x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear_4x_cont(to, ret, \ - CLEAR \ - "4: clear.d [%0+]\n", \ - FIXUP \ - "5: addq 4,%1\n", \ - TENTRY \ - " .dword 4b,5b\n") - -#define __asm_clear_8(to, ret) \ - __asm_clear_8x_cont(to, ret, "", "", "") - -#define __asm_clear_12x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear_8x_cont(to, ret, \ - CLEAR \ - "6: clear.d [%0+]\n", \ - FIXUP \ - "7: addq 4,%1\n", \ - TENTRY \ - " .dword 6b,7b\n") - -#define __asm_clear_12(to, ret) \ - __asm_clear_12x_cont(to, ret, "", "", "") - -#define __asm_clear_16x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear_12x_cont(to, ret, \ - CLEAR \ - "8: clear.d [%0+]\n", \ - FIXUP \ - "9: addq 4,%1\n", \ - TENTRY \ - " .dword 8b,9b\n") - -#define __asm_clear_16(to, ret) \ - __asm_clear_16x_cont(to, ret, "", "", "") - -#define __asm_clear_20x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear_16x_cont(to, ret, \ - CLEAR \ - "10: clear.d [%0+]\n", \ - FIXUP \ - "11: addq 4,%1\n", \ - TENTRY \ - " .dword 10b,11b\n") - -#define __asm_clear_20(to, ret) \ - __asm_clear_20x_cont(to, ret, "", "", "") - -#define __asm_clear_24x_cont(to, ret, CLEAR, FIXUP, TENTRY) \ - __asm_clear_20x_cont(to, ret, \ - CLEAR \ - "12: clear.d [%0+]\n", \ - FIXUP \ - "13: addq 4,%1\n", \ - TENTRY \ - " .dword 12b,13b\n") - -#define __asm_clear_24(to, ret) \ - __asm_clear_24x_cont(to, ret, "", "", "") - -/* - * Return the size of a string (including the ending 0) - * - * Return length of string in userspace including terminating 0 - * or 0 for error. Return a value greater than N if too long. - */ - -static inline long -strnlen_user(const char *s, long n) -{ - long res, tmp1; - - if (!access_ok(VERIFY_READ, s, 0)) - return 0; - - /* - * This code is deduced from: - * - * tmp1 = n; - * while (tmp1-- > 0 && *s++) - * ; - * - * res = n - tmp1; - * - * (with tweaks). - */ - - __asm__ __volatile__ ( - " move.d %1,$acr\n" - " cmpq 0,$acr\n" - "0:\n" - " ble 1f\n" - " subq 1,$acr\n" - - "4: test.b [%0+]\n" - " bne 0b\n" - " cmpq 0,$acr\n" - "1:\n" - " move.d %1,%0\n" - " sub.d $acr,%0\n" - "2:\n" - " .section .fixup,\"ax\"\n" - - "3: jump 2b\n" - " clear.d %0\n" - - " .previous\n" - " .section __ex_table,\"a\"\n" - " .dword 4b,3b\n" - " .previous\n" - : "=r" (res), "=r" (tmp1) - : "0" (s), "1" (n) - : "acr"); - - return res; -} - -#endif diff --git a/include/asm-cris/arch-v32/unistd.h b/include/asm-cris/arch-v32/unistd.h deleted file mode 100644 index 0051114c63c7..000000000000 --- a/include/asm-cris/arch-v32/unistd.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_UNISTD_H_ -#define _ASM_CRIS_ARCH_UNISTD_H_ - -/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */ -/* - * Don't remove the .ifnc tests; they are an insurance against - * any hard-to-spot gcc register allocation bugs. - */ -#define _syscall0(type,name) \ -type name(void) \ -{ \ - register long __a __asm__ ("r10"); \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1,$r10$r9\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_) \ - : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall1(type,name,type1,arg1) \ -type name(type1 arg1) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1,$r10$r9\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a) \ - : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall2(type,name,type1,arg1,type2,arg2) \ -type name(type1 arg1,type2 arg2) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __b __asm__ ("r11") = (long) arg2; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1%3,$r10$r9$r11\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b) \ - : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \ -type name(type1 arg1,type2 arg2,type3 arg3) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __b __asm__ ("r11") = (long) arg2; \ - register long __c __asm__ ("r12") = (long) arg3; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1%3%4,$r10$r9$r11$r12\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), "r" (__c) \ - : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ -type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __b __asm__ ("r11") = (long) arg2; \ - register long __c __asm__ ("r12") = (long) arg3; \ - register long __d __asm__ ("r13") = (long) arg4; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), \ - "r" (__c), "r" (__d)\ - : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ - type5,arg5) \ -type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __b __asm__ ("r11") = (long) arg2; \ - register long __c __asm__ ("r12") = (long) arg3; \ - register long __d __asm__ ("r13") = (long) arg4; \ - register long __e __asm__ ("mof") = (long) arg5; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1%3%4%5%6,$r10$r9$r11$r12$r13$mof\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), \ - "r" (__c), "r" (__d), "h" (__e) \ - : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ - type5,arg5,type6,arg6) \ -type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \ -{ \ - register long __a __asm__ ("r10") = (long) arg1; \ - register long __b __asm__ ("r11") = (long) arg2; \ - register long __c __asm__ ("r12") = (long) arg3; \ - register long __d __asm__ ("r13") = (long) arg4; \ - register long __e __asm__ ("mof") = (long) arg5; \ - register long __f __asm__ ("srp") = (long) arg6; \ - register long __n_ __asm__ ("r9") = (__NR_##name); \ - __asm__ __volatile__ (".ifnc %0%1%3%4%5%6%7,$r10$r9$r11$r12$r13$mof$srp\n\t" \ - ".err\n\t" \ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), \ - "r" (__c), "r" (__d), "h" (__e), "x" (__f) \ - : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ -} - -#endif diff --git a/include/asm-cris/arch-v32/user.h b/include/asm-cris/arch-v32/user.h deleted file mode 100644 index 03fa1f3c3c00..000000000000 --- a/include/asm-cris/arch-v32/user.h +++ /dev/null @@ -1,41 +0,0 @@ -#ifndef _ASM_CRIS_ARCH_USER_H -#define _ASM_CRIS_ARCH_USER_H - -/* User-mode register used for core dumps. */ - -struct user_regs_struct { - unsigned long r0; /* General registers. */ - unsigned long r1; - unsigned long r2; - unsigned long r3; - unsigned long r4; - unsigned long r5; - unsigned long r6; - unsigned long r7; - unsigned long r8; - unsigned long r9; - unsigned long r10; - unsigned long r11; - unsigned long r12; - unsigned long r13; - unsigned long sp; /* R14, Stack pointer. */ - unsigned long acr; /* R15, Address calculation register. */ - unsigned long bz; /* P0, Constant zero (8-bits). */ - unsigned long vr; /* P1, Version register (8-bits). */ - unsigned long pid; /* P2, Process ID (8-bits). */ - unsigned long srs; /* P3, Support register select (8-bits). */ - unsigned long wz; /* P4, Constant zero (16-bits). */ - unsigned long exs; /* P5, Exception status. */ - unsigned long eda; /* P6, Exception data address. */ - unsigned long mof; /* P7, Multiply overflow regiter. */ - unsigned long dz; /* P8, Constant zero (32-bits). */ - unsigned long ebp; /* P9, Exception base pointer. */ - unsigned long erp; /* P10, Exception return pointer. */ - unsigned long srp; /* P11, Subroutine return pointer. */ - unsigned long nrp; /* P12, NMI return pointer. */ - unsigned long ccs; /* P13, Condition code stack. */ - unsigned long usp; /* P14, User mode stack pointer. */ - unsigned long spc; /* P15, Single step PC. */ -}; - -#endif /* _ASM_CRIS_ARCH_USER_H */ diff --git a/include/asm-cris/atomic.h b/include/asm-cris/atomic.h deleted file mode 100644 index 5fc87768774a..000000000000 --- a/include/asm-cris/atomic.h +++ /dev/null @@ -1,164 +0,0 @@ -/* $Id: atomic.h,v 1.3 2001/07/25 16:15:19 bjornw Exp $ */ - -#ifndef __ASM_CRIS_ATOMIC__ -#define __ASM_CRIS_ATOMIC__ - -#include - -#include -#include - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -typedef struct { volatile int counter; } atomic_t; - -#define ATOMIC_INIT(i) { (i) } - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v,i) (((v)->counter) = (i)) - -/* These should be written in asm but we do it in C for now. */ - -static inline void atomic_add(int i, volatile atomic_t *v) -{ - unsigned long flags; - cris_atomic_save(v, flags); - v->counter += i; - cris_atomic_restore(v, flags); -} - -static inline void atomic_sub(int i, volatile atomic_t *v) -{ - unsigned long flags; - cris_atomic_save(v, flags); - v->counter -= i; - cris_atomic_restore(v, flags); -} - -static inline int atomic_add_return(int i, volatile atomic_t *v) -{ - unsigned long flags; - int retval; - cris_atomic_save(v, flags); - retval = (v->counter += i); - cris_atomic_restore(v, flags); - return retval; -} - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -static inline int atomic_sub_return(int i, volatile atomic_t *v) -{ - unsigned long flags; - int retval; - cris_atomic_save(v, flags); - retval = (v->counter -= i); - cris_atomic_restore(v, flags); - return retval; -} - -static inline int atomic_sub_and_test(int i, volatile atomic_t *v) -{ - int retval; - unsigned long flags; - cris_atomic_save(v, flags); - retval = (v->counter -= i) == 0; - cris_atomic_restore(v, flags); - return retval; -} - -static inline void atomic_inc(volatile atomic_t *v) -{ - unsigned long flags; - cris_atomic_save(v, flags); - (v->counter)++; - cris_atomic_restore(v, flags); -} - -static inline void atomic_dec(volatile atomic_t *v) -{ - unsigned long flags; - cris_atomic_save(v, flags); - (v->counter)--; - cris_atomic_restore(v, flags); -} - -static inline int atomic_inc_return(volatile atomic_t *v) -{ - unsigned long flags; - int retval; - cris_atomic_save(v, flags); - retval = ++(v->counter); - cris_atomic_restore(v, flags); - return retval; -} - -static inline int atomic_dec_return(volatile atomic_t *v) -{ - unsigned long flags; - int retval; - cris_atomic_save(v, flags); - retval = --(v->counter); - cris_atomic_restore(v, flags); - return retval; -} -static inline int atomic_dec_and_test(volatile atomic_t *v) -{ - int retval; - unsigned long flags; - cris_atomic_save(v, flags); - retval = --(v->counter) == 0; - cris_atomic_restore(v, flags); - return retval; -} - -static inline int atomic_inc_and_test(volatile atomic_t *v) -{ - int retval; - unsigned long flags; - cris_atomic_save(v, flags); - retval = ++(v->counter) == 0; - cris_atomic_restore(v, flags); - return retval; -} - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - unsigned long flags; - - cris_atomic_save(v, flags); - ret = v->counter; - if (likely(ret == old)) - v->counter = new; - cris_atomic_restore(v, flags); - return ret; -} - -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int ret; - unsigned long flags; - - cris_atomic_save(v, flags); - ret = v->counter; - if (ret != u) - v->counter += a; - cris_atomic_restore(v, flags); - return ret != u; -} -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include -#endif diff --git a/include/asm-cris/auxvec.h b/include/asm-cris/auxvec.h deleted file mode 100644 index cb30b01bf19f..000000000000 --- a/include/asm-cris/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMCRIS_AUXVEC_H -#define __ASMCRIS_AUXVEC_H - -#endif diff --git a/include/asm-cris/axisflashmap.h b/include/asm-cris/axisflashmap.h deleted file mode 100644 index 015ca5445ddd..000000000000 --- a/include/asm-cris/axisflashmap.h +++ /dev/null @@ -1,61 +0,0 @@ -#ifndef __ASM_AXISFLASHMAP_H -#define __ASM_AXISFLASHMAP_H - -/* Bootblock parameters are stored at 0xc000 and has the FLASH_BOOT_MAGIC - * as start, it ends with 0xFFFFFFFF */ -#define FLASH_BOOT_MAGIC 0xbeefcace -#define BOOTPARAM_OFFSET 0xc000 -/* apps/bootblocktool is used to read and write the parameters, - * and it has nothing to do with the partition table. - */ - -#define PARTITION_TABLE_OFFSET 10 -#define PARTITION_TABLE_MAGIC 0xbeef /* Not a good magic */ - -/* The partitiontable_head is located at offset +10: */ -struct partitiontable_head { - __u16 magic; /* PARTITION_TABLE_MAGIC */ - __u16 size; /* Length of ptable block (entries + end marker) */ - __u32 checksum; /* simple longword sum, over entries + end marker */ -}; - -/* And followed by partition table entries */ -struct partitiontable_entry { - __u32 offset; /* relative to the sector the ptable is in */ - __u32 size; /* in bytes */ - __u32 checksum; /* simple longword sum */ - __u16 type; /* see type codes below */ - __u16 flags; /* bit 0: ro/rw = 1/0 */ - __u32 future0; /* 16 bytes reserved for future use */ - __u32 future1; - __u32 future2; - __u32 future3; -}; -/* ended by an end marker: */ -#define PARTITIONTABLE_END_MARKER 0xFFFFFFFF -#define PARTITIONTABLE_END_MARKER_SIZE 4 - -#define PARTITIONTABLE_END_PAD 10 - -/* Complete structure for whole partition table */ -/* note that table may end before CONFIG_ETRAX_PTABLE_ENTRIES by setting - * offset of the last entry + 1 to PARTITIONTABLE_END_MARKER. - */ -struct partitiontable { - __u8 skip[PARTITION_TABLE_OFFSET]; - struct partitiontable_head head; - struct partitiontable_entry entries[]; -}; - -#define PARTITION_TYPE_PARAM 0x0001 -#define PARTITION_TYPE_KERNEL 0x0002 -#define PARTITION_TYPE_JFFS 0x0003 -#define PARTITION_TYPE_JFFS2 0x0000 - -#define PARTITION_FLAGS_READONLY_MASK 0x0001 -#define PARTITION_FLAGS_READONLY 0x0001 - -/* The master mtd for the entire flash. */ -extern struct mtd_info *axisflash_mtd; - -#endif diff --git a/include/asm-cris/bitops.h b/include/asm-cris/bitops.h deleted file mode 100644 index 75ea6e096483..000000000000 --- a/include/asm-cris/bitops.h +++ /dev/null @@ -1,166 +0,0 @@ -/* asm/bitops.h for Linux/CRIS - * - * TODO: asm versions if speed is needed - * - * All bit operations return 0 if the bit was cleared before the - * operation and != 0 if it was not. - * - * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). - */ - -#ifndef _CRIS_BITOPS_H -#define _CRIS_BITOPS_H - -/* Currently this is unsuitable for consumption outside the kernel. */ -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -#include -#include -#include - -/* - * set_bit - Atomically set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * This function is atomic and may not be reordered. See __set_bit() - * if you do not require the atomic guarantees. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ - -#define set_bit(nr, addr) (void)test_and_set_bit(nr, addr) - -/* - * clear_bit - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit() is atomic and may not be reordered. However, it does - * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() - * in order to ensure changes are visible on other processors. - */ - -#define clear_bit(nr, addr) (void)test_and_clear_bit(nr, addr) - -/* - * change_bit - Toggle a bit in memory - * @nr: Bit to change - * @addr: Address to start counting from - * - * change_bit() is atomic and may not be reordered. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ - -#define change_bit(nr, addr) (void)test_and_change_bit(nr, addr) - -/** - * test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ - -static inline int test_and_set_bit(int nr, volatile unsigned long *addr) -{ - unsigned int mask, retval; - unsigned long flags; - unsigned int *adr = (unsigned int *)addr; - - adr += nr >> 5; - mask = 1 << (nr & 0x1f); - cris_atomic_save(addr, flags); - retval = (mask & *adr) != 0; - *adr |= mask; - cris_atomic_restore(addr, flags); - return retval; -} - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -/** - * test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to clear - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ - -static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned int mask, retval; - unsigned long flags; - unsigned int *adr = (unsigned int *)addr; - - adr += nr >> 5; - mask = 1 << (nr & 0x1f); - cris_atomic_save(addr, flags); - retval = (mask & *adr) != 0; - *adr &= ~mask; - cris_atomic_restore(addr, flags); - return retval; -} - -/** - * test_and_change_bit - Change a bit and return its old value - * @nr: Bit to change - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ - -static inline int test_and_change_bit(int nr, volatile unsigned long *addr) -{ - unsigned int mask, retval; - unsigned long flags; - unsigned int *adr = (unsigned int *)addr; - adr += nr >> 5; - mask = 1 << (nr & 0x1f); - cris_atomic_save(addr, flags); - retval = (mask & *adr) != 0; - *adr ^= mask; - cris_atomic_restore(addr, flags); - return retval; -} - -#include - -/* - * Since we define it "external", it collides with the built-in - * definition, which doesn't have the same semantics. We don't want to - * use -fno-builtin, so just hide the name ffs. - */ -#define ffs kernel_ffs - -#include -#include -#include -#include -#include - -#include - -#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a) -#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a) - -#include -#include - -#endif /* __KERNEL__ */ - -#endif /* _CRIS_BITOPS_H */ diff --git a/include/asm-cris/bug.h b/include/asm-cris/bug.h deleted file mode 100644 index fee12d4ae683..000000000000 --- a/include/asm-cris/bug.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _CRIS_BUG_H -#define _CRIS_BUG_H -#include -#endif diff --git a/include/asm-cris/bugs.h b/include/asm-cris/bugs.h deleted file mode 100644 index c5907aac1007..000000000000 --- a/include/asm-cris/bugs.h +++ /dev/null @@ -1,21 +0,0 @@ -/* $Id: bugs.h,v 1.2 2001/01/17 17:03:18 bjornw Exp $ - * - * include/asm-cris/bugs.h - * - * Copyright (C) 2001 Axis Communications AB - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -static void check_bugs(void) -{ -} - - - - diff --git a/include/asm-cris/byteorder.h b/include/asm-cris/byteorder.h deleted file mode 100644 index 0cd9db1cc888..000000000000 --- a/include/asm-cris/byteorder.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _CRIS_BYTEORDER_H -#define _CRIS_BYTEORDER_H - -#ifdef __GNUC__ - -#ifdef __KERNEL__ -#include - -/* defines are necessary because the other files detect the presence - * of a defined __arch_swab32, not an inline - */ -#define __arch__swab32(x) ___arch__swab32(x) -#define __arch__swab16(x) ___arch__swab16(x) -#endif /* __KERNEL__ */ - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#endif /* __GNUC__ */ - -#include - -#endif - - diff --git a/include/asm-cris/cache.h b/include/asm-cris/cache.h deleted file mode 100644 index 46a3b26e205a..000000000000 --- a/include/asm-cris/cache.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_CACHE_H -#define _ASM_CACHE_H - -#include - -#endif /* _ASM_CACHE_H */ diff --git a/include/asm-cris/cacheflush.h b/include/asm-cris/cacheflush.h deleted file mode 100644 index cf60e3f69f8d..000000000000 --- a/include/asm-cris/cacheflush.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _CRIS_CACHEFLUSH_H -#define _CRIS_CACHEFLUSH_H - -/* Keep includes the same across arches. */ -#include - -/* The cache doesn't need to be flushed when TLB entries change because - * the cache is mapped to physical memory, not virtual memory - */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -int change_page_attr(struct page *page, int numpages, pgprot_t prot); - -#endif /* _CRIS_CACHEFLUSH_H */ diff --git a/include/asm-cris/checksum.h b/include/asm-cris/checksum.h deleted file mode 100644 index c6c5be62c698..000000000000 --- a/include/asm-cris/checksum.h +++ /dev/null @@ -1,83 +0,0 @@ -/* TODO: csum_tcpudp_magic could be speeded up, and csum_fold as well */ - -#ifndef _CRIS_CHECKSUM_H -#define _CRIS_CHECKSUM_H - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); - -/* - * Fold a partial checksum into a word - */ - -static inline __sum16 csum_fold(__wsum csum) -{ - u32 sum = (__force u32)csum; - sum = (sum & 0xffff) + (sum >> 16); /* add in end-around carry */ - sum = (sum & 0xffff) + (sum >> 16); /* add in end-around carry */ - return (__force __sum16)~sum; -} - -extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, - int *errptr); - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ - -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - return csum_fold(csum_partial(iph, ihl * 4, 0)); -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ - -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold (csum_partial(buff, len, 0)); -} - -#endif diff --git a/include/asm-cris/cputime.h b/include/asm-cris/cputime.h deleted file mode 100644 index 4446a65656fa..000000000000 --- a/include/asm-cris/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __CRIS_CPUTIME_H -#define __CRIS_CPUTIME_H - -#include - -#endif /* __CRIS_CPUTIME_H */ diff --git a/include/asm-cris/current.h b/include/asm-cris/current.h deleted file mode 100644 index 5f5c0efd00be..000000000000 --- a/include/asm-cris/current.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _CRIS_CURRENT_H -#define _CRIS_CURRENT_H - -#include - -struct task_struct; - -static inline struct task_struct * get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() - -#endif /* !(_CRIS_CURRENT_H) */ diff --git a/include/asm-cris/delay.h b/include/asm-cris/delay.h deleted file mode 100644 index 123e19aef49d..000000000000 --- a/include/asm-cris/delay.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _CRIS_DELAY_H -#define _CRIS_DELAY_H - -/* - * Copyright (C) 1998-2002 Axis Communications AB - * - * Delay routines, using a pre-computed "loops_per_second" value. - */ - -#include - -/* Use only for very small delays ( < 1 msec). */ - -extern unsigned long loops_per_usec; /* arch/cris/mm/init.c */ - -/* May be defined by arch/delay.h. */ -#ifndef udelay -static inline void udelay(unsigned long usecs) -{ - __delay(usecs * loops_per_usec); -} -#endif - -#endif /* defined(_CRIS_DELAY_H) */ - - - diff --git a/include/asm-cris/device.h b/include/asm-cris/device.h deleted file mode 100644 index d8f9872b0e2d..000000000000 --- a/include/asm-cris/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/include/asm-cris/div64.h b/include/asm-cris/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/include/asm-cris/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-cris/dma-mapping.h b/include/asm-cris/dma-mapping.h deleted file mode 100644 index da8ef8e8f842..000000000000 --- a/include/asm-cris/dma-mapping.h +++ /dev/null @@ -1,170 +0,0 @@ -/* DMA mapping. Nothing tricky here, just virt_to_phys */ - -#ifndef _ASM_CRIS_DMA_MAPPING_H -#define _ASM_CRIS_DMA_MAPPING_H - -#include -#include - -#include -#include -#include - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) - -#ifdef CONFIG_PCI -#include - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); -#else -static inline void * -dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - gfp_t flag) -{ - BUG(); - return NULL; -} - -static inline void -dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t dma_handle) -{ - BUG(); -} -#endif -static inline dma_addr_t -dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - return virt_to_phys(ptr); -} - -static inline void -dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -static inline int -dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - printk("Map sg\n"); - return nents; -} - -static inline dma_addr_t -dma_map_page(struct device *dev, struct page *page, unsigned long offset, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - return page_to_phys(page) + offset; -} - -static inline void -dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - - -static inline void -dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -static inline void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void -dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void -dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void -dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ -} - -static inline void -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ -} - -static inline int -dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ - return 0; -} - -static inline int -dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if(mask < 0x00ffffff) - return 0; - - return 1; -} - -static inline int -dma_set_mask(struct device *dev, u64 mask) -{ - if(!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - - return 0; -} - -static inline int -dma_get_cache_alignment(void) -{ - return (1 << INTERNODE_CACHE_SHIFT); -} - -#define dma_is_consistent(d, h) (1) - -static inline void -dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ -} - - -#endif diff --git a/include/asm-cris/dma.h b/include/asm-cris/dma.h deleted file mode 100644 index 6f188dc56138..000000000000 --- a/include/asm-cris/dma.h +++ /dev/null @@ -1,21 +0,0 @@ -/* $Id: dma.h,v 1.2 2001/05/09 12:17:42 johana Exp $ */ - -#ifndef _ASM_DMA_H -#define _ASM_DMA_H - -#include - -/* it's useless on the Etrax, but unfortunately needed by the new - bootmem allocator (but this should do it for this) */ - -#define MAX_DMA_ADDRESS PAGE_OFFSET - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_DMA_H */ diff --git a/include/asm-cris/elf.h b/include/asm-cris/elf.h deleted file mode 100644 index f0d17fbc81ba..000000000000 --- a/include/asm-cris/elf.h +++ /dev/null @@ -1,93 +0,0 @@ -#ifndef __ASMCRIS_ELF_H -#define __ASMCRIS_ELF_H - -/* - * ELF register definitions.. - */ - -#include - -#define R_CRIS_NONE 0 -#define R_CRIS_8 1 -#define R_CRIS_16 2 -#define R_CRIS_32 3 -#define R_CRIS_8_PCREL 4 -#define R_CRIS_16_PCREL 5 -#define R_CRIS_32_PCREL 6 -#define R_CRIS_GNU_VTINHERIT 7 -#define R_CRIS_GNU_VTENTRY 8 -#define R_CRIS_COPY 9 -#define R_CRIS_GLOB_DAT 10 -#define R_CRIS_JUMP_SLOT 11 -#define R_CRIS_RELATIVE 12 -#define R_CRIS_16_GOT 13 -#define R_CRIS_32_GOT 14 -#define R_CRIS_16_GOTPLT 15 -#define R_CRIS_32_GOTPLT 16 -#define R_CRIS_32_GOTREL 17 -#define R_CRIS_32_PLT_GOTREL 18 -#define R_CRIS_32_PLT_PCREL 19 - -typedef unsigned long elf_greg_t; - -/* Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is - thus exposed to user-space. */ -#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -/* A placeholder; CRIS does not have any fp regs. */ -typedef unsigned long elf_fpregset_t; - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2LSB -#define ELF_ARCH EM_CRIS - -#include - -/* The master for these definitions is {binutils}/include/elf/cris.h: */ -/* User symbols in this file have a leading underscore. */ -#define EF_CRIS_UNDERSCORE 0x00000001 - -/* This is a mask for different incompatible machine variants. */ -#define EF_CRIS_VARIANT_MASK 0x0000000e - -/* Variant 0; may contain v0..10 object. */ -#define EF_CRIS_VARIANT_ANY_V0_V10 0x00000000 - -/* Variant 1; contains v32 object. */ -#define EF_CRIS_VARIANT_V32 0x00000002 - -/* Variant 2; contains object compatible with v32 and v10. */ -#define EF_CRIS_VARIANT_COMMON_V10_V32 0x00000004 -/* End of excerpt from {binutils}/include/elf/cris.h. */ - -#define USE_ELF_CORE_DUMP - -#define ELF_EXEC_PAGESIZE 8192 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - -/* This yields a mask that user programs can use to figure out what - instruction set this CPU supports. This could be done in user space, - but it's not easy, and we've already done it here. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. -*/ - -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) - -#endif diff --git a/include/asm-cris/emergency-restart.h b/include/asm-cris/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/include/asm-cris/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-cris/errno.h b/include/asm-cris/errno.h deleted file mode 100644 index 2bf5eb5fa773..000000000000 --- a/include/asm-cris/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _CRIS_ERRNO_H -#define _CRIS_ERRNO_H - -#include - -#endif diff --git a/include/asm-cris/eshlibld.h b/include/asm-cris/eshlibld.h deleted file mode 100644 index 10ce36cf79a9..000000000000 --- a/include/asm-cris/eshlibld.h +++ /dev/null @@ -1,113 +0,0 @@ -/*!************************************************************************** -*! -*! FILE NAME : eshlibld.h -*! -*! DESCRIPTION: Prototypes for exported shared library functions -*! -*! FUNCTIONS : perform_cris_aout_relocations, shlibmod_fork, shlibmod_exit -*! (EXPORTED) -*! -*!--------------------------------------------------------------------------- -*! -*! (C) Copyright 1998, 1999 Axis Communications AB, LUND, SWEDEN -*! -*!**************************************************************************/ -/* $Id: eshlibld.h,v 1.2 2001/02/23 13:47:33 bjornw Exp $ */ - -#ifndef _cris_relocate_h -#define _cris_relocate_h - -/* Please note that this file is also compiled into the xsim simulator. - Try to avoid breaking its double use (only works on a little-endian - 32-bit machine such as the i386 anyway). - - Use __KERNEL__ when you're about to use kernel functions, - (which you should not do here anyway, since this file is - used by glibc). - Use defined(__KERNEL__) || defined(__elinux__) when doing - things that only makes sense on an elinux system. - Use __CRIS__ when you're about to do (really) CRIS-specific code. -*/ - -/* We have dependencies all over the place for the host system - for xsim being a linux system, so let's not pretend anything - else with #ifdef:s here until fixed. */ -#include - -/* Maybe do sanity checking if file input. */ -#undef SANITYCHECK_RELOC - -/* Maybe output debug messages. */ -#undef RELOC_DEBUG - -/* Maybe we want to share core as well as disk space. - Mainly depends on the config macro CONFIG_SHARE_SHLIB_CORE, but it is - assumed that we want to share code when debugging (exposes more - trouble). */ -#ifndef SHARE_LIB_CORE -# if (defined(__KERNEL__) || !defined(RELOC_DEBUG)) \ - && !defined(CONFIG_SHARE_SHLIB_CORE) -# define SHARE_LIB_CORE 0 -# else -# define SHARE_LIB_CORE 1 -# endif /* __KERNEL__ etc */ -#endif /* SHARE_LIB_CORE */ - - -/* Main exported function; supposed to be called when the program a.out - has been read in. */ -extern int -perform_cris_aout_relocations(unsigned long text, unsigned long tlength, - unsigned long data, unsigned long dlength, - unsigned long baddr, unsigned long blength, - - /* These may be zero when there's "perfect" - position-independent code. */ - unsigned char *trel, unsigned long tsrel, - unsigned long dsrel, - - /* These will be zero at a first try, to see - if code is statically linked. Else a - second try, with the symbol table and - string table nonzero should be done. */ - unsigned char *symbols, unsigned long symlength, - unsigned char *strings, unsigned long stringlength, - - /* These will only be used when symbol table - information is present. */ - char **env, int envc, - int euid, int is_suid); - - -#ifdef RELOC_DEBUG -/* Task-specific debug stuff. */ -struct task_reloc_debug { - struct memdebug *alloclast; - unsigned long alloc_total; - unsigned long export_total; -}; -#endif /* RELOC_DEBUG */ - -#if SHARE_LIB_CORE - -/* When code (and some very specific data) is shared and not just - dynamically linked, we need to export hooks for exec beginning and - end. */ - -struct shlibdep; - -extern void -shlibmod_exit(struct shlibdep **deps); - -/* Returns 0 if failure, nonzero for ok. */ -extern int -shlibmod_fork(struct shlibdep **deps); - -#else /* ! SHARE_LIB_CORE */ -# define shlibmod_exit(x) -# define shlibmod_fork(x) 1 -#endif /* ! SHARE_LIB_CORE */ - -#endif _cris_relocate_h -/********************** END OF FILE eshlibld.h *****************************/ - diff --git a/include/asm-cris/ethernet.h b/include/asm-cris/ethernet.h deleted file mode 100644 index 4d58652c3a49..000000000000 --- a/include/asm-cris/ethernet.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * ioctl defines for ethernet driver - * - * Copyright (c) 2001 Axis Communications AB - * - * Author: Mikael Starvik - * - */ - -#ifndef _CRIS_ETHERNET_H -#define _CRIS_ETHERNET_H -#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE /* Auto neg speed */ -#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1 /* 10 Mbps */ -#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2 /* 100 Mbps. */ -#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3 /* Auto neg duplex */ -#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4 /* Full duplex */ -#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5 /* Half duplex */ -#define SET_ETH_ENABLE_LEDS SIOCDEVPRIVATE+6 /* Enable net LEDs */ -#define SET_ETH_DISABLE_LEDS SIOCDEVPRIVATE+7 /* Disable net LEDs */ -#define SET_ETH_AUTONEG SIOCDEVPRIVATE+8 -#endif /* _CRIS_ETHERNET_H */ diff --git a/include/asm-cris/etraxgpio.h b/include/asm-cris/etraxgpio.h deleted file mode 100644 index 38f1c8e1770c..000000000000 --- a/include/asm-cris/etraxgpio.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * The following devices are accessable using this driver using - * GPIO_MAJOR (120) and a couple of minor numbers. - * - * For ETRAX 100LX (CONFIG_ETRAX_ARCH_V10): - * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction - * /dev/gpiob minor 1, 8 bit GPIO, each bit can change direction - * /dev/leds minor 2, Access to leds depending on kernelconfig - * /dev/gpiog minor 3 - * g0dir, g8_15dir, g16_23dir, g24 dir configurable in R_GEN_CONFIG - * g1-g7 and g25-g31 is both input and outputs but on different pins - * Also note that some bits change pins depending on what interfaces - * are enabled. - * - * For ETRAX FS (CONFIG_ETRAXFS): - * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction - * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction - * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction - * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction - * /dev/gpioe minor 5, 18 bit GPIO, each bit can change direction - * /dev/leds minor 2, Access to leds depending on kernelconfig - * - * For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3): - * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction - * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction - * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction - * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction - * /dev/leds minor 2, Access to leds depending on kernelconfig - * /dev/pwm0 minor 16, PWM channel 0 on PA30 - * /dev/pwm1 minor 17, PWM channel 1 on PA31 - * /dev/pwm2 minor 18, PWM channel 2 on PB26 - * - */ -#ifndef _ASM_ETRAXGPIO_H -#define _ASM_ETRAXGPIO_H - -/* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */ -#ifdef CONFIG_ETRAX_ARCH_V10 -#define ETRAXGPIO_IOCTYPE 43 -#define GPIO_MINOR_A 0 -#define GPIO_MINOR_B 1 -#define GPIO_MINOR_LEDS 2 -#define GPIO_MINOR_G 3 -#define GPIO_MINOR_LAST 3 -#endif - -#ifdef CONFIG_ETRAXFS -#define ETRAXGPIO_IOCTYPE 43 -#define GPIO_MINOR_A 0 -#define GPIO_MINOR_B 1 -#define GPIO_MINOR_LEDS 2 -#define GPIO_MINOR_C 3 -#define GPIO_MINOR_D 4 -#define GPIO_MINOR_E 5 -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -#define GPIO_MINOR_V 6 -#define GPIO_MINOR_LAST 6 -#else -#define GPIO_MINOR_LAST 5 -#endif -#endif - -#ifdef CONFIG_CRIS_MACH_ARTPEC3 -#define ETRAXGPIO_IOCTYPE 43 -#define GPIO_MINOR_A 0 -#define GPIO_MINOR_B 1 -#define GPIO_MINOR_LEDS 2 -#define GPIO_MINOR_C 3 -#define GPIO_MINOR_D 4 -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -#define GPIO_MINOR_V 6 -#define GPIO_MINOR_LAST 6 -#else -#define GPIO_MINOR_LAST 4 -#endif -#define GPIO_MINOR_PWM0 16 -#define GPIO_MINOR_PWM1 17 -#define GPIO_MINOR_PWM2 18 -#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PWM2 -#endif - -/* supported ioctl _IOC_NR's */ - -#define IO_READBITS 0x1 /* read and return current port bits (obsolete) */ -#define IO_SETBITS 0x2 /* set the bits marked by 1 in the argument */ -#define IO_CLRBITS 0x3 /* clear the bits marked by 1 in the argument */ - -/* the alarm is waited for by select() */ - -#define IO_HIGHALARM 0x4 /* set alarm on high for bits marked by 1 */ -#define IO_LOWALARM 0x5 /* set alarm on low for bits marked by 1 */ -#define IO_CLRALARM 0x6 /* clear alarm for bits marked by 1 */ - -/* LED ioctl */ -#define IO_LEDACTIVE_SET 0x7 /* set active led - * 0=off, 1=green, 2=red, 3=yellow */ - -/* GPIO direction ioctl's */ -#define IO_READDIR 0x8 /* Read direction 0=input 1=output (obsolete) */ -#define IO_SETINPUT 0x9 /* Set direction for bits set, 0=unchanged 1=input, - returns mask with current inputs (obsolete) */ -#define IO_SETOUTPUT 0xA /* Set direction for bits set, 0=unchanged 1=output, - returns mask with current outputs (obsolete)*/ - -/* LED ioctl extended */ -#define IO_LED_SETBIT 0xB -#define IO_LED_CLRBIT 0xC - -/* SHUTDOWN ioctl */ -#define IO_SHUTDOWN 0xD -#define IO_GET_PWR_BT 0xE - -/* Bit toggling in driver settings */ -/* bit set in low byte0 is CLK mask (0x00FF), - bit set in byte1 is DATA mask (0xFF00) - msb, data_mask[7:0] , clk_mask[7:0] - */ -#define IO_CFG_WRITE_MODE 0xF -#define IO_CFG_WRITE_MODE_VALUE(msb, data_mask, clk_mask) \ - ( (((msb)&1) << 16) | (((data_mask) &0xFF) << 8) | ((clk_mask) & 0xFF) ) - -/* The following 4 ioctl's take a pointer as argument and handles - * 32 bit ports (port G) properly. - * These replaces IO_READBITS,IO_SETINPUT AND IO_SETOUTPUT - */ -#define IO_READ_INBITS 0x10 /* *arg is result of reading the input pins */ -#define IO_READ_OUTBITS 0x11 /* *arg is result of reading the output shadow */ -#define IO_SETGET_INPUT 0x12 /* bits set in *arg is set to input, - * *arg updated with current input pins. - */ -#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, - * *arg updated with current output pins. - */ - -/* The following ioctl's are applicable to the PWM channels only */ - -#define IO_PWM_SET_MODE 0x20 - -enum io_pwm_mode { - PWM_OFF = 0, /* disabled, deallocated */ - PWM_STANDARD = 1, /* 390 kHz, duty cycle 0..255/256 */ - PWM_FAST = 2, /* variable freq, w/ 10ns active pulse len */ - PWM_VARFREQ = 3 /* individually configurable high/low periods */ -}; - -struct io_pwm_set_mode { - enum io_pwm_mode mode; -}; - -/* Only for mode PWM_VARFREQ. Period lo/high set in increments of 10ns - * from 10ns (value = 0) to 81920ns (value = 8191) - * (Resulting frequencies range from 50 MHz (10ns + 10ns) down to - * 6.1 kHz (81920ns + 81920ns) at 50% duty cycle, to 12.2 kHz at min/max duty - * cycle (81920 + 10ns or 10ns + 81920ns, respectively).) - */ -#define IO_PWM_SET_PERIOD 0x21 - -struct io_pwm_set_period { - unsigned int lo; /* 0..8191 */ - unsigned int hi; /* 0..8191 */ -}; - -/* Only for modes PWM_STANDARD and PWM_FAST. - * For PWM_STANDARD, set duty cycle of 390 kHz PWM output signal, from - * 0 (value = 0) to 255/256 (value = 255). - * For PWM_FAST, set duty cycle of PWM output signal from - * 0% (value = 0) to 100% (value = 255). Output signal in this mode - * is a 10ns pulse surrounded by a high or low level depending on duty - * cycle (except for 0% and 100% which result in a constant output). - * Resulting output frequency varies from 50 MHz at 50% duty cycle, - * down to 390 kHz at min/max duty cycle. - */ -#define IO_PWM_SET_DUTY 0x22 - -struct io_pwm_set_duty { - int duty; /* 0..255 */ -}; - -#endif diff --git a/include/asm-cris/etraxi2c.h b/include/asm-cris/etraxi2c.h deleted file mode 100644 index e369a7620893..000000000000 --- a/include/asm-cris/etraxi2c.h +++ /dev/null @@ -1,36 +0,0 @@ -/* $Id: etraxi2c.h,v 1.1 2001/01/18 15:49:57 bjornw Exp $ */ - -#ifndef _LINUX_ETRAXI2C_H -#define _LINUX_ETRAXI2C_H - -/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */ - -#define ETRAXI2C_IOCTYPE 44 - -/* supported ioctl _IOC_NR's */ - -/* in write operations, the argument contains both i2c - * slave, register and value. - */ - -#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value)) -#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8)) - -#define I2C_ARGSLAVE(arg) ((arg) >> 16) -#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff) -#define I2C_ARGVALUE(arg) ((arg) & 0xff) - -#define I2C_WRITEREG 0x1 /* write to an i2c register */ -#define I2C_READREG 0x2 /* read from an i2c register */ - -/* -EXAMPLE usage: - - i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val); - ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg); - - i2c_arg = I2C_READARG(STA013_READ_ADDR, reg); - val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg); - -*/ -#endif diff --git a/include/asm-cris/fasttimer.h b/include/asm-cris/fasttimer.h deleted file mode 100644 index 8f8a8d6c9653..000000000000 --- a/include/asm-cris/fasttimer.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/include/asm-cris/fasttimer.h - * - * Fast timers for ETRAX100LX - * Copyright (C) 2000-2007 Axis Communications AB - */ -#include /* struct timeval */ -#include - -#ifdef CONFIG_ETRAX_FAST_TIMER - -typedef void fast_timer_function_type(unsigned long); - -struct fasttime_t { - unsigned long tv_jiff; /* jiffies */ - unsigned long tv_usec; /* microseconds */ -}; - -struct fast_timer{ /* Close to timer_list */ - struct fast_timer *next; - struct fast_timer *prev; - struct fasttime_t tv_set; - struct fasttime_t tv_expires; - unsigned long delay_us; - fast_timer_function_type *function; - unsigned long data; - const char *name; -}; - -extern struct fast_timer *fast_timer_list; - -void start_one_shot_timer(struct fast_timer *t, - fast_timer_function_type *function, - unsigned long data, - unsigned long delay_us, - const char *name); - -int del_fast_timer(struct fast_timer * t); -/* return 1 if deleted */ - - -void schedule_usleep(unsigned long us); - - -int fast_timer_init(void); - -#endif diff --git a/include/asm-cris/fb.h b/include/asm-cris/fb.h deleted file mode 100644 index c7df38030992..000000000000 --- a/include/asm-cris/fb.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ -#include - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-cris/fcntl.h b/include/asm-cris/fcntl.h deleted file mode 100644 index 46ab12db5739..000000000000 --- a/include/asm-cris/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-cris/futex.h b/include/asm-cris/futex.h deleted file mode 100644 index 6a332a9f099c..000000000000 --- a/include/asm-cris/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/include/asm-cris/hardirq.h b/include/asm-cris/hardirq.h deleted file mode 100644 index 74178adeb1cd..000000000000 --- a/include/asm-cris/hardirq.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __ASM_HARDIRQ_H -#define __ASM_HARDIRQ_H - -#include -#include -#include - -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -void ack_bad_irq(unsigned int irq); - -#define HARDIRQ_BITS 8 - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -#endif /* __ASM_HARDIRQ_H */ diff --git a/include/asm-cris/hw_irq.h b/include/asm-cris/hw_irq.h deleted file mode 100644 index 298066020af2..000000000000 --- a/include/asm-cris/hw_irq.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - -#endif - diff --git a/include/asm-cris/io.h b/include/asm-cris/io.h deleted file mode 100644 index b87ce63f531f..000000000000 --- a/include/asm-cris/io.h +++ /dev/null @@ -1,154 +0,0 @@ -#ifndef _ASM_CRIS_IO_H -#define _ASM_CRIS_IO_H - -#include /* for __va, __pa */ -#include -#include - -struct cris_io_operations -{ - u32 (*read_mem)(void *addr, int size); - void (*write_mem)(u32 val, int size, void *addr); - u32 (*read_io)(u32 port, void *addr, int size, int count); - void (*write_io)(u32 port, void *addr, int size, int count); -}; - -#ifdef CONFIG_PCI -extern struct cris_io_operations *cris_iops; -#else -#define cris_iops ((struct cris_io_operations*)NULL) -#endif - -/* - * Change virtual addresses to physical addresses and vv. - */ - -static inline unsigned long virt_to_phys(volatile void * address) -{ - return __pa(address); -} - -static inline void * phys_to_virt(unsigned long address) -{ - return __va(address); -} - -extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); -extern void __iomem * __ioremap_prot(unsigned long phys_addr, unsigned long size, pgprot_t prot); - -static inline void __iomem * ioremap (unsigned long offset, unsigned long size) -{ - return __ioremap(offset, size, 0); -} - -extern void iounmap(volatile void * __iomem addr); - -extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size); - -/* - * IO bus memory addresses are also 1:1 with the physical address - */ -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the CRIS architecture, we just read/write the - * memory location directly. - */ -#ifdef CONFIG_PCI -#define PCI_SPACE(x) ((((unsigned)(x)) & 0x10000000) == 0x10000000) -#else -#define PCI_SPACE(x) 0 -#endif -static inline unsigned char readb(const volatile void __iomem *addr) -{ - if (PCI_SPACE(addr) && cris_iops) - return cris_iops->read_mem((void*)addr, 1); - else - return *(volatile unsigned char __force *) addr; -} -static inline unsigned short readw(const volatile void __iomem *addr) -{ - if (PCI_SPACE(addr) && cris_iops) - return cris_iops->read_mem((void*)addr, 2); - else - return *(volatile unsigned short __force *) addr; -} -static inline unsigned int readl(const volatile void __iomem *addr) -{ - if (PCI_SPACE(addr) && cris_iops) - return cris_iops->read_mem((void*)addr, 4); - else - return *(volatile unsigned int __force *) addr; -} -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl - -static inline void writeb(unsigned char b, volatile void __iomem *addr) -{ - if (PCI_SPACE(addr) && cris_iops) - cris_iops->write_mem(b, 1, (void*)addr); - else - *(volatile unsigned char __force *) addr = b; -} -static inline void writew(unsigned short b, volatile void __iomem *addr) -{ - if (PCI_SPACE(addr) && cris_iops) - cris_iops->write_mem(b, 2, (void*)addr); - else - *(volatile unsigned short __force *) addr = b; -} -static inline void writel(unsigned int b, volatile void __iomem *addr) -{ - if (PCI_SPACE(addr) && cris_iops) - cris_iops->write_mem(b, 4, (void*)addr); - else - *(volatile unsigned int __force *) addr = b; -} -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -#define mmiowb() - -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - - -/* I/O port access. Normally there is no I/O space on CRIS but when - * Cardbus/PCI is enabled the request is passed through the bridge. - */ - -#define IO_SPACE_LIMIT 0xffff -#define inb(port) (cris_iops ? cris_iops->read_io(port,NULL,1,1) : 0) -#define inw(port) (cris_iops ? cris_iops->read_io(port,NULL,2,1) : 0) -#define inl(port) (cris_iops ? cris_iops->read_io(port,NULL,4,1) : 0) -#define insb(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,1,count) : 0) -#define insw(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,2,count) : 0) -#define insl(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,4,count) : 0) -#define outb(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,1,1) -#define outw(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,2,1) -#define outl(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,4,1) -#define outsb(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,1,count) -#define outsw(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,2,count) -#define outsl(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,3,count) - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif diff --git a/include/asm-cris/ioctl.h b/include/asm-cris/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/include/asm-cris/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-cris/ioctls.h b/include/asm-cris/ioctls.h deleted file mode 100644 index 4f4e52531fa0..000000000000 --- a/include/asm-cris/ioctls.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef __ARCH_CRIS_IOCTLS_H__ -#define __ARCH_CRIS_IOCTLS_H__ - -/* verbatim copy of asm-i386/ioctls.h */ - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ -#define FIOQSIZE 0x5460 - -#define TIOCSERSETRS485 0x5461 /* enable rs-485 */ -#define TIOCSERWRRS485 0x5462 /* write rs-485 */ - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif diff --git a/include/asm-cris/ipcbuf.h b/include/asm-cris/ipcbuf.h deleted file mode 100644 index 8b0c18b02844..000000000000 --- a/include/asm-cris/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __CRIS_IPCBUF_H__ -#define __CRIS_IPCBUF_H__ - -/* - * The user_ipc_perm structure for CRIS architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __CRIS_IPCBUF_H__ */ diff --git a/include/asm-cris/irq.h b/include/asm-cris/irq.h deleted file mode 100644 index 998cce9f3200..000000000000 --- a/include/asm-cris/irq.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -#include - -static inline int irq_canonicalize(int irq) -{ - return irq; -} - -#endif /* _ASM_IRQ_H */ - - diff --git a/include/asm-cris/irq_regs.h b/include/asm-cris/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/include/asm-cris/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-cris/kdebug.h b/include/asm-cris/kdebug.h deleted file mode 100644 index 6ece1b037665..000000000000 --- a/include/asm-cris/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-cris/kmap_types.h b/include/asm-cris/kmap_types.h deleted file mode 100644 index 492988cb9077..000000000000 --- a/include/asm-cris/kmap_types.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - -/* Dummy header just to define km_type. None of this - * is actually used on cris. - */ - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif diff --git a/include/asm-cris/linkage.h b/include/asm-cris/linkage.h deleted file mode 100644 index 291c2d01c44f..000000000000 --- a/include/asm-cris/linkage.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -/* Nothing to see here... */ - -#endif diff --git a/include/asm-cris/local.h b/include/asm-cris/local.h deleted file mode 100644 index c11c530f74d0..000000000000 --- a/include/asm-cris/local.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-cris/mman.h b/include/asm-cris/mman.h deleted file mode 100644 index 1c35e1b66b46..000000000000 --- a/include/asm-cris/mman.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __CRIS_MMAN_H__ -#define __CRIS_MMAN_H__ - -/* verbatim copy of asm-i386/ version */ - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __CRIS_MMAN_H__ */ diff --git a/include/asm-cris/mmu.h b/include/asm-cris/mmu.h deleted file mode 100644 index c40a1bcad06c..000000000000 --- a/include/asm-cris/mmu.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * CRIS MMU constants and PTE layout - */ - -#ifndef _CRIS_MMU_H -#define _CRIS_MMU_H - -#include - -#endif diff --git a/include/asm-cris/mmu_context.h b/include/asm-cris/mmu_context.h deleted file mode 100644 index 72ba08dcfd18..000000000000 --- a/include/asm-cris/mmu_context.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __CRIS_MMU_CONTEXT_H -#define __CRIS_MMU_CONTEXT_H - -#include - -extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); -extern void get_mmu_context(struct mm_struct *mm); -extern void destroy_context(struct mm_struct *mm); -extern void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk); - -#define deactivate_mm(tsk,mm) do { } while (0) - -#define activate_mm(prev,next) switch_mm((prev),(next),NULL) - -/* current active pgd - this is similar to other processors pgd - * registers like cr3 on the i386 - */ - -extern volatile DEFINE_PER_CPU(pgd_t *,current_pgd); /* defined in arch/cris/mm/fault.c */ - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -#endif diff --git a/include/asm-cris/module.h b/include/asm-cris/module.h deleted file mode 100644 index 7ee72311bd78..000000000000 --- a/include/asm-cris/module.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _ASM_CRIS_MODULE_H -#define _ASM_CRIS_MODULE_H -/* cris is simple */ -struct mod_arch_specific { }; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr -#endif /* _ASM_CRIS_MODULE_H */ diff --git a/include/asm-cris/msgbuf.h b/include/asm-cris/msgbuf.h deleted file mode 100644 index ada63df1d574..000000000000 --- a/include/asm-cris/msgbuf.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef _CRIS_MSGBUF_H -#define _CRIS_MSGBUF_H - -/* verbatim copy of asm-i386 version */ - -/* - * The msqid64_ds structure for CRIS architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _CRIS_MSGBUF_H */ diff --git a/include/asm-cris/mutex.h b/include/asm-cris/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/include/asm-cris/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-cris/page.h b/include/asm-cris/page.h deleted file mode 100644 index d19272ba6b69..000000000000 --- a/include/asm-cris/page.h +++ /dev/null @@ -1,74 +0,0 @@ -#ifndef _CRIS_PAGE_H -#define _CRIS_PAGE_H - -#include -#include - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 13 -#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ - alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) -#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE - -/* - * These are used to make use of C type-checking.. - */ -#ifndef __ASSEMBLY__ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; -#endif - -#define pte_val(x) ((x).pte) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -/* On CRIS the PFN numbers doesn't start at 0 so we have to compensate */ -/* for that before indexing into the page table starting at mem_map */ -#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) -#define pfn_valid(pfn) (((pfn) - (PAGE_OFFSET >> PAGE_SHIFT)) < max_mapnr) - -/* to index into the page map. our pages all start at physical addr PAGE_OFFSET so - * we can let the map start there. notice that we subtract PAGE_OFFSET because - * we start our mem_map there - in other ports they map mem_map physically and - * use __pa instead. in our system both the physical and virtual address of DRAM - * is too high to let mem_map start at 0, so we do it this way instead (similar - * to arm and m68k I think) - */ - -#define virt_to_page(kaddr) (mem_map + (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT)) -#define VALID_PAGE(page) (((page) - mem_map) < max_mapnr) -#define virt_addr_valid(kaddr) pfn_valid((unsigned)(kaddr) >> PAGE_SHIFT) - -/* convert a page (based on mem_map and forward) to a physical address - * do this by figuring out the virtual address and then use __pa - */ - -#define page_to_phys(page) __pa((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) - -#ifndef __ASSEMBLY__ - -#endif /* __ASSEMBLY__ */ - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#include -#include - -#endif /* _CRIS_PAGE_H */ - diff --git a/include/asm-cris/param.h b/include/asm-cris/param.h deleted file mode 100644 index 0e47994e40be..000000000000 --- a/include/asm-cris/param.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASMCRIS_PARAM_H -#define _ASMCRIS_PARAM_H - -/* Currently we assume that HZ=100 is good for CRIS. */ -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 8192 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif diff --git a/include/asm-cris/pci.h b/include/asm-cris/pci.h deleted file mode 100644 index 730ce40fdd0f..000000000000 --- a/include/asm-cris/pci.h +++ /dev/null @@ -1,68 +0,0 @@ -#ifndef __ASM_CRIS_PCI_H -#define __ASM_CRIS_PCI_H - - -#ifdef __KERNEL__ -#include /* for struct page */ - -/* Can be used to override the logic in pci_scan_bus for skipping - already-configured bus numbers - to be used for buggy BIOSes - or architectures with incomplete PCI setup by the loader */ - -#define pcibios_assign_all_busses(void) 1 - -extern unsigned long pci_mem_start; -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x10000000 - -#define PCIBIOS_MIN_CARDBUS_IO 0x4000 - -void pcibios_config_init(void); -struct pci_bus * pcibios_scan_root(int bus); -int pcibios_assign_resources(void); - -void pcibios_set_master(struct pci_dev *dev); -void pcibios_penalize_isa_irq(int irq); -struct irq_routing_table *pcibios_get_irq_routing_table(void); -int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq); - -/* Dynamic DMA mapping stuff. - * i386 has everything mapped statically. - */ - -#include -#include -#include -#include -#include - -struct pci_dev; - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -#define HAVE_PCI_MMAP -extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine); - - -#endif /* __KERNEL__ */ - -/* implement the pci_ DMA API in terms of the generic device dma_ one */ -#include - -/* generic pci stuff */ -#include - -#endif /* __ASM_CRIS_PCI_H */ diff --git a/include/asm-cris/percpu.h b/include/asm-cris/percpu.h deleted file mode 100644 index 6db9b43cf80a..000000000000 --- a/include/asm-cris/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _CRIS_PERCPU_H -#define _CRIS_PERCPU_H - -#include - -#endif /* _CRIS_PERCPU_H */ diff --git a/include/asm-cris/pgalloc.h b/include/asm-cris/pgalloc.h deleted file mode 100644 index a1ba761d0573..000000000000 --- a/include/asm-cris/pgalloc.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _CRIS_PGALLOC_H -#define _CRIS_PGALLOC_H - -#include -#include - -#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, pte) -#define pmd_populate(mm, pmd, pte) pmd_set(pmd, page_address(pte)) -#define pmd_pgtable(pmd) pmd_page(pmd) - -/* - * Allocate and free page tables. - */ - -static inline pgd_t *pgd_alloc (struct mm_struct *mm) -{ - return (pgd_t *)get_zeroed_page(GFP_KERNEL); -} - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - free_page((unsigned long)pgd); -} - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -{ - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); - return pte; -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) -{ - struct page *pte; - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); - pgtable_page_ctor(pte); - return pte; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long)pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - __free_page(pte); -} - -#define __pte_free_tlb(tlb,pte) \ -do { \ - pgtable_page_dtor(pte); \ - tlb_remove_page((tlb), pte); \ -} while (0) - -#define check_pgt_cache() do { } while (0) - -#endif diff --git a/include/asm-cris/pgtable.h b/include/asm-cris/pgtable.h deleted file mode 100644 index 829e7a7d9fb9..000000000000 --- a/include/asm-cris/pgtable.h +++ /dev/null @@ -1,299 +0,0 @@ -/* - * CRIS pgtable.h - macros and functions to manipulate page tables. - */ - -#ifndef _CRIS_PGTABLE_H -#define _CRIS_PGTABLE_H - -#include -#include - -#ifndef __ASSEMBLY__ -#include -#include -#endif -#include - -/* - * The Linux memory management assumes a three-level page table setup. On - * CRIS, we use that, but "fold" the mid level into the top-level page - * table. Since the MMU TLB is software loaded through an interrupt, it - * supports any page table structure, so we could have used a three-level - * setup, but for the amounts of memory we normally use, a two-level is - * probably more efficient. - * - * This file contains the functions and defines necessary to modify and use - * the CRIS page table tree. - */ -#ifndef __ASSEMBLY__ -extern void paging_init(void); -#endif - -/* Certain architectures need to do special things when pte's - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval)) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) -#define set_pgu(pudptr, pudval) (*(pudptr) = pudval) - -/* PGDIR_SHIFT determines the size of the area a second-level page table can - * map. It is equal to the page size times the number of PTE's that fit in - * a PMD page. A PTE is 4-bytes in CRIS. Hence the following number. - */ - -#define PGDIR_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-2)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * entries per page directory level: we use a two-level, so - * we don't really have any PMD directory physically. - * pointers are 4 bytes so we can use the page size and - * divide it by 4 (shift by 2). - */ -#define PTRS_PER_PTE (1UL << (PAGE_SHIFT-2)) -#define PTRS_PER_PGD (1UL << (PAGE_SHIFT-2)) - -/* calculate how many PGD entries a user-level program can use - * the first mappable virtual address is 0 - * (TASK_SIZE is the maximum virtual address space) - */ - -#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -/* zero page used for uninitialized stuff */ -#ifndef __ASSEMBLY__ -extern unsigned long empty_zero_page; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) -#endif - -/* number of bits that fit into a memory pointer */ -#define BITS_PER_PTR (8*sizeof(unsigned long)) - -/* to align the pointer to a pointer address */ -#define PTR_MASK (~(sizeof(void*)-1)) - -/* sizeof(void*)==1<>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK) - -/* to set the page-dir */ -#define SET_PAGE_DIR(tsk,pgdir) - -#define pte_none(x) (!pte_val(x)) -#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) -#define pte_clear(mm,addr,xp) do { pte_val(*(xp)) = 0; } while (0) - -#define pmd_none(x) (!pmd_val(x)) -/* by removing the _PAGE_KERNEL bit from the comparision, the same pmd_bad - * works for both _PAGE_TABLE and _KERNPG_TABLE pmd entries. - */ -#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_KERNEL)) != _PAGE_TABLE) -#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) -#define pmd_clear(xp) do { pmd_val(*(xp)) = 0; } while (0) - -#ifndef __ASSEMBLY__ - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ - -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_MODIFIED; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_special(pte_t pte) { return 0; } - -static inline pte_t pte_wrprotect(pte_t pte) -{ - pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE); - return pte; -} - -static inline pte_t pte_mkclean(pte_t pte) -{ - pte_val(pte) &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE); - return pte; -} - -static inline pte_t pte_mkold(pte_t pte) -{ - pte_val(pte) &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ); - return pte; -} - -static inline pte_t pte_mkwrite(pte_t pte) -{ - pte_val(pte) |= _PAGE_WRITE; - if (pte_val(pte) & _PAGE_MODIFIED) - pte_val(pte) |= _PAGE_SILENT_WRITE; - return pte; -} - -static inline pte_t pte_mkdirty(pte_t pte) -{ - pte_val(pte) |= _PAGE_MODIFIED; - if (pte_val(pte) & _PAGE_WRITE) - pte_val(pte) |= _PAGE_SILENT_WRITE; - return pte; -} - -static inline pte_t pte_mkyoung(pte_t pte) -{ - pte_val(pte) |= _PAGE_ACCESSED; - if (pte_val(pte) & _PAGE_READ) - { - pte_val(pte) |= _PAGE_SILENT_READ; - if ((pte_val(pte) & (_PAGE_WRITE | _PAGE_MODIFIED)) == - (_PAGE_WRITE | _PAGE_MODIFIED)) - pte_val(pte) |= _PAGE_SILENT_WRITE; - } - return pte; -} -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ - -/* What actually goes as arguments to the various functions is less than - * obvious, but a rule of thumb is that struct page's goes as struct page *, - * really physical DRAM addresses are unsigned long's, and DRAM "virtual" - * addresses (the 0xc0xxxxxx's) goes as void *'s. - */ - -static inline pte_t __mk_pte(void * page, pgprot_t pgprot) -{ - pte_t pte; - /* the PTE needs a physical address */ - pte_val(pte) = __pa(page) | pgprot_val(pgprot); - return pte; -} - -#define mk_pte(page, pgprot) __mk_pte(page_address(page), (pgprot)) - -#define mk_pte_phys(physpage, pgprot) \ -({ \ - pte_t __pte; \ - \ - pte_val(__pte) = (physpage) + pgprot_val(pgprot); \ - __pte; \ -}) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; } - - -/* pte_val refers to a page in the 0x4xxxxxxx physical DRAM interval - * __pte_page(pte_val) refers to the "virtual" DRAM interval - * pte_pagenr refers to the page-number counted starting from the virtual DRAM start - */ - -static inline unsigned long __pte_page(pte_t pte) -{ - /* the PTE contains a physical address */ - return (unsigned long)__va(pte_val(pte) & PAGE_MASK); -} - -#define pte_pagenr(pte) ((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT) - -/* permanent address of a page */ - -#define __page_address(page) (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT)) -#define pte_page(pte) (mem_map+pte_pagenr(pte)) - -/* only the pte's themselves need to point to physical DRAM (see above) - * the pagetable links are purely handled within the kernel SW and thus - * don't need the __pa and __va transformations. - */ - -static inline void pmd_set(pmd_t * pmdp, pte_t * ptep) -{ pmd_val(*pmdp) = _PAGE_TABLE | (unsigned long) ptep; } - -#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) -#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) - -/* to find an entry in a page-table-directory. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) - -/* to find an entry in a page-table-directory */ -static inline pgd_t * pgd_offset(const struct mm_struct *mm, unsigned long address) -{ - return mm->pgd + pgd_index(address); -} - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* Find an entry in the third-level page table.. */ -#define __pte_offset(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) -#define pte_offset_map(dir, address) \ - ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) -#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) - -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) -#define pte_pfn(x) ((unsigned long)(__va((x).pte)) >> PAGE_SHIFT) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %p(%08lx).\n", __FILE__, __LINE__, &(e), pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %p(%08lx).\n", __FILE__, __LINE__, &(e), pgd_val(e)) - - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* defined in head.S */ - -/* - * CRIS doesn't have any external MMU info: the kernel page - * tables contain all the necessary information. - * - * Actually I am not sure on what this could be used for. - */ -static inline void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte) -{ -} - -/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */ -/* Since the PAGE_PRESENT bit is bit 4, we can use the bits above */ - -#define __swp_type(x) (((x).val >> 5) & 0x7f) -#define __swp_offset(x) ((x).val >> 12) -#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 5) | ((offset) << 12) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#define kern_addr_valid(addr) (1) - -#include - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -#define pte_to_pgoff(x) (pte_val(x) >> 6) -#define pgoff_to_pte(x) __pte(((x) << 6) | _PAGE_FILE) - -typedef pte_t *pte_addr_t; - -#endif /* __ASSEMBLY__ */ -#endif /* _CRIS_PGTABLE_H */ diff --git a/include/asm-cris/poll.h b/include/asm-cris/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/include/asm-cris/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-cris/posix_types.h b/include/asm-cris/posix_types.h deleted file mode 100644 index ce3fb25a460b..000000000000 --- a/include/asm-cris/posix_types.h +++ /dev/null @@ -1,66 +0,0 @@ -/* $Id: posix_types.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $ */ - -/* We cheat a bit and use our C-coded bitops functions from asm/bitops.h */ -/* I guess we should write these in assembler because they are used often. */ - -#ifndef __ARCH_CRIS_POSIX_TYPES_H -#define __ARCH_CRIS_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef __SIZE_TYPE__ __kernel_size_t; -typedef long __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#ifdef __KERNEL__ - -#undef __FD_SET -#define __FD_SET(fd,fdsetp) set_bit(fd, (void *)(fdsetp)) - -#undef __FD_CLR -#define __FD_CLR(fd,fdsetp) clear_bit(fd, (void *)(fdsetp)) - -#undef __FD_ISSET -#define __FD_ISSET(fd,fdsetp) test_bit(fd, (void *)(fdsetp)) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) memset((void *)(fdsetp), 0, __FDSET_LONGS << 2) - -#endif /* __KERNEL__ */ - -#endif /* __ARCH_CRIS_POSIX_TYPES_H */ diff --git a/include/asm-cris/processor.h b/include/asm-cris/processor.h deleted file mode 100644 index cdc0c1dce6be..000000000000 --- a/include/asm-cris/processor.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * include/asm-cris/processor.h - * - * Copyright (C) 2000, 2001 Axis Communications AB - * - * Authors: Bjorn Wesen Initial version - * - */ - -#ifndef __ASM_CRIS_PROCESSOR_H -#define __ASM_CRIS_PROCESSOR_H - -#include -#include -#include -#include - -struct task_struct; - -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3)) - -/* THREAD_SIZE is the size of the task_struct/kernel_stack combo. - * normally, the stack is found by doing something like p + THREAD_SIZE - * in CRIS, a page is 8192 bytes, which seems like a sane size - */ - -#define THREAD_SIZE PAGE_SIZE -#define KERNEL_STACK_SIZE PAGE_SIZE - -/* - * At user->kernel entry, the pt_regs struct is stacked on the top of the kernel-stack. - * This macro allows us to find those regs for a task. - * Notice that subsequent pt_regs stackings, like recursive interrupts occurring while - * we're in the kernel, won't affect this - only the first user->kernel transition - * registers are reached by this. - */ - -#define user_regs(thread_info) (((struct pt_regs *)((unsigned long)(thread_info) + THREAD_SIZE)) - 1) - -/* - * Dito but for the currently running task - */ - -#define task_pt_regs(task) user_regs(task_thread_info(task)) -#define current_regs() task_pt_regs(current) - -static inline void prepare_to_copy(struct task_struct *tsk) -{ -} - -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) - -extern unsigned long thread_saved_pc(struct task_struct *tsk); - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ - /* Nothing needs to be done. */ -} - -#define init_stack (init_thread_union.stack) - -#define cpu_relax() barrier() - -#endif /* __ASM_CRIS_PROCESSOR_H */ diff --git a/include/asm-cris/ptrace.h b/include/asm-cris/ptrace.h deleted file mode 100644 index d910925e3174..000000000000 --- a/include/asm-cris/ptrace.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _CRIS_PTRACE_H -#define _CRIS_PTRACE_H - -#include - -#ifdef __KERNEL__ - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 - -#define profile_pc(regs) instruction_pointer(regs) - -#endif /* __KERNEL__ */ - -#endif /* _CRIS_PTRACE_H */ diff --git a/include/asm-cris/resource.h b/include/asm-cris/resource.h deleted file mode 100644 index b5d29448de4e..000000000000 --- a/include/asm-cris/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _CRIS_RESOURCE_H -#define _CRIS_RESOURCE_H - -#include - -#endif diff --git a/include/asm-cris/rs485.h b/include/asm-cris/rs485.h deleted file mode 100644 index c331c51b0c2b..000000000000 --- a/include/asm-cris/rs485.h +++ /dev/null @@ -1,20 +0,0 @@ -/* RS-485 structures */ - -/* RS-485 support */ -/* Used with ioctl() TIOCSERSETRS485 */ -struct rs485_control { - unsigned short rts_on_send; - unsigned short rts_after_sent; - unsigned long delay_rts_before_send; - unsigned short enabled; -#ifdef __KERNEL__ - int disable_serial_loopback; -#endif -}; - -/* Used with ioctl() TIOCSERWRRS485 */ -struct rs485_write { - unsigned short outc_size; - unsigned char *outc; -}; - diff --git a/include/asm-cris/rtc.h b/include/asm-cris/rtc.h deleted file mode 100644 index 17d3019529e1..000000000000 --- a/include/asm-cris/rtc.h +++ /dev/null @@ -1,107 +0,0 @@ - -#ifndef __RTC_H__ -#define __RTC_H__ - -#ifdef CONFIG_ETRAX_DS1302 - /* Dallas DS1302 clock/calendar register numbers. */ -# define RTC_SECONDS 0 -# define RTC_MINUTES 1 -# define RTC_HOURS 2 -# define RTC_DAY_OF_MONTH 3 -# define RTC_MONTH 4 -# define RTC_WEEKDAY 5 -# define RTC_YEAR 6 -# define RTC_CONTROL 7 - - /* Bits in CONTROL register. */ -# define RTC_CONTROL_WRITEPROTECT 0x80 -# define RTC_TRICKLECHARGER 8 - - /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */ -# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */ -# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */ -# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */ -# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */ -# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */ -# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */ -# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */ - -#elif defined(CONFIG_ETRAX_PCF8563) - /* I2C bus slave registers. */ -# define RTC_I2C_READ 0xa3 -# define RTC_I2C_WRITE 0xa2 - - /* Phillips PCF8563 registers. */ -# define RTC_CONTROL1 0x00 /* Control/Status register 1. */ -# define RTC_CONTROL2 0x01 /* Control/Status register 2. */ -# define RTC_CLOCKOUT_FREQ 0x0d /* CLKOUT frequency. */ -# define RTC_TIMER_CONTROL 0x0e /* Timer control. */ -# define RTC_TIMER_CNTDOWN 0x0f /* Timer countdown. */ - - /* BCD encoded clock registers. */ -# define RTC_SECONDS 0x02 -# define RTC_MINUTES 0x03 -# define RTC_HOURS 0x04 -# define RTC_DAY_OF_MONTH 0x05 -# define RTC_WEEKDAY 0x06 /* Not coded in BCD! */ -# define RTC_MONTH 0x07 -# define RTC_YEAR 0x08 -# define RTC_MINUTE_ALARM 0x09 -# define RTC_HOUR_ALARM 0x0a -# define RTC_DAY_ALARM 0x0b -# define RTC_WEEKDAY_ALARM 0x0c - -#endif - -#ifdef CONFIG_ETRAX_DS1302 -extern unsigned char ds1302_readreg(int reg); -extern void ds1302_writereg(int reg, unsigned char val); -extern int ds1302_init(void); -# define CMOS_READ(x) ds1302_readreg(x) -# define CMOS_WRITE(val,reg) ds1302_writereg(reg,val) -# define RTC_INIT() ds1302_init() -#elif defined(CONFIG_ETRAX_PCF8563) -extern unsigned char pcf8563_readreg(int reg); -extern void pcf8563_writereg(int reg, unsigned char val); -extern int pcf8563_init(void); -# define CMOS_READ(x) pcf8563_readreg(x) -# define CMOS_WRITE(val,reg) pcf8563_writereg(reg,val) -# define RTC_INIT() pcf8563_init() -#else - /* No RTC configured so we shouldn't try to access any. */ -# define CMOS_READ(x) 42 -# define CMOS_WRITE(x,y) -# define RTC_INIT() (-1) -#endif - -/* - * The struct used to pass data via the following ioctl. Similar to the - * struct tm in , but it needs to be here so that the kernel - * source is self contained, allowing cross-compiles, etc. etc. - */ -struct rtc_time { - int tm_sec; - int tm_min; - int tm_hour; - int tm_mday; - int tm_mon; - int tm_year; - int tm_wday; - int tm_yday; - int tm_isdst; -}; - -/* ioctl() calls that are permitted to the /dev/rtc interface. */ -#define RTC_MAGIC 'p' -/* Read RTC time. */ -#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) -/* Set RTC time. */ -#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) -#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int) -/* Voltage low detector */ -#define RTC_VL_READ _IOR(RTC_MAGIC, 0x13, int) -/* Clear voltage low information */ -#define RTC_VL_CLR _IO(RTC_MAGIC, 0x14) -#define RTC_MAX_IOCTL 0x14 - -#endif /* __RTC_H__ */ diff --git a/include/asm-cris/scatterlist.h b/include/asm-cris/scatterlist.h deleted file mode 100644 index faff53ad1f96..000000000000 --- a/include/asm-cris/scatterlist.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __ASM_CRIS_SCATTERLIST_H -#define __ASM_CRIS_SCATTERLIST_H - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - char * address; /* Location data is to be transferred to */ - unsigned int length; - - /* The following is i386 highmem junk - not used by us */ - unsigned long page_link; - unsigned int offset;/* for highmem, page offset */ - -}; - -#define sg_dma_address(sg) ((sg)->address) -#define sg_dma_len(sg) ((sg)->length) -/* i386 junk */ - -#define ISA_DMA_THRESHOLD (0x1fffffff) - -#endif /* !(__ASM_CRIS_SCATTERLIST_H) */ diff --git a/include/asm-cris/sections.h b/include/asm-cris/sections.h deleted file mode 100644 index 2c998ce8967b..000000000000 --- a/include/asm-cris/sections.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _CRIS_SECTIONS_H -#define _CRIS_SECTIONS_H - -/* nothing to see, move along */ -#include - -#endif diff --git a/include/asm-cris/segment.h b/include/asm-cris/segment.h deleted file mode 100644 index c067513beaaf..000000000000 --- a/include/asm-cris/segment.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_SEGMENT_H -#define _ASM_SEGMENT_H - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#endif diff --git a/include/asm-cris/sembuf.h b/include/asm-cris/sembuf.h deleted file mode 100644 index 7fed9843796d..000000000000 --- a/include/asm-cris/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _CRIS_SEMBUF_H -#define _CRIS_SEMBUF_H - -/* - * The semid64_ds structure for CRIS architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _CRIS_SEMBUF_H */ diff --git a/include/asm-cris/setup.h b/include/asm-cris/setup.h deleted file mode 100644 index b90728652d1a..000000000000 --- a/include/asm-cris/setup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _CRIS_SETUP_H -#define _CRIS_SETUP_H - -#define COMMAND_LINE_SIZE 256 - -#endif diff --git a/include/asm-cris/shmbuf.h b/include/asm-cris/shmbuf.h deleted file mode 100644 index 3239e3f000e8..000000000000 --- a/include/asm-cris/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _CRIS_SHMBUF_H -#define _CRIS_SHMBUF_H - -/* - * The shmid64_ds structure for CRIS architecture (same as for i386) - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _CRIS_SHMBUF_H */ diff --git a/include/asm-cris/shmparam.h b/include/asm-cris/shmparam.h deleted file mode 100644 index d29d12270687..000000000000 --- a/include/asm-cris/shmparam.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_CRIS_SHMPARAM_H -#define _ASM_CRIS_SHMPARAM_H - -/* same as asm-i386/ version.. */ - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_CRIS_SHMPARAM_H */ diff --git a/include/asm-cris/sigcontext.h b/include/asm-cris/sigcontext.h deleted file mode 100644 index a1d634e120df..000000000000 --- a/include/asm-cris/sigcontext.h +++ /dev/null @@ -1,24 +0,0 @@ -/* $Id: sigcontext.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $ */ - -#ifndef _ASM_CRIS_SIGCONTEXT_H -#define _ASM_CRIS_SIGCONTEXT_H - -#include - -/* This struct is saved by setup_frame in signal.c, to keep the current context while - a signal handler is executed. It's restored by sys_sigreturn. - - To keep things simple, we use pt_regs here even though normally you just specify - the list of regs to save. Then we can use copy_from_user on the entire regs instead - of a bunch of get_user's as well... - -*/ - -struct sigcontext { - struct pt_regs regs; /* needs to be first */ - unsigned long oldmask; - unsigned long usp; /* usp before stacking this gunk on it */ -}; - -#endif - diff --git a/include/asm-cris/siginfo.h b/include/asm-cris/siginfo.h deleted file mode 100644 index c1cd6d16928b..000000000000 --- a/include/asm-cris/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _CRIS_SIGINFO_H -#define _CRIS_SIGINFO_H - -#include - -#endif diff --git a/include/asm-cris/signal.h b/include/asm-cris/signal.h deleted file mode 100644 index 349ae682b568..000000000000 --- a/include/asm-cris/signal.h +++ /dev/null @@ -1,163 +0,0 @@ -#ifndef _ASM_CRIS_SIGNAL_H -#define _ASM_CRIS_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ - -#define SA_NOCLDSTOP 0x00000001u -#define SA_NOCLDWAIT 0x00000002u -#define SA_SIGINFO 0x00000004u -#define SA_ONSTACK 0x08000000u -#define SA_RESTART 0x10000000u -#define SA_NODEFER 0x40000000u -#define SA_RESETHAND 0x80000000u - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include - -/* here we could define asm-optimized sigaddset, sigdelset etc. operations. - * if we don't, generic ones are used from linux/signal.h - */ -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-cris/smp.h b/include/asm-cris/smp.h deleted file mode 100644 index dba33aba3e95..000000000000 --- a/include/asm-cris/smp.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_SMP_H -#define __ASM_SMP_H - -#include - -extern cpumask_t phys_cpu_present_map; -extern cpumask_t cpu_possible_map; - -#define raw_smp_processor_id() (current_thread_info()->cpu) - -#endif diff --git a/include/asm-cris/socket.h b/include/asm-cris/socket.h deleted file mode 100644 index 9df0ca82f5de..000000000000 --- a/include/asm-cris/socket.h +++ /dev/null @@ -1,61 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -/* almost the same as asm-i386/socket.h */ - -#include - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* _ASM_SOCKET_H */ - - diff --git a/include/asm-cris/sockios.h b/include/asm-cris/sockios.h deleted file mode 100644 index cfe7bfecf599..000000000000 --- a/include/asm-cris/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_CRIS_SOCKIOS__ -#define __ARCH_CRIS_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif diff --git a/include/asm-cris/spinlock.h b/include/asm-cris/spinlock.h deleted file mode 100644 index 2e8ba8afc7af..000000000000 --- a/include/asm-cris/spinlock.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-cris/stat.h b/include/asm-cris/stat.h deleted file mode 100644 index 9e558cc3c43b..000000000000 --- a/include/asm-cris/stat.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef _CRIS_STAT_H -#define _CRIS_STAT_H - -/* Keep this a verbatim copy of i386 version; tweak CRIS-specific bits in - the kernel if necessary. */ - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -#define STAT_HAVE_NSEC 1 - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ - - unsigned long long st_ino; -}; - -#endif diff --git a/include/asm-cris/statfs.h b/include/asm-cris/statfs.h deleted file mode 100644 index fdaf921844bc..000000000000 --- a/include/asm-cris/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _CRIS_STATFS_H -#define _CRIS_STATFS_H - -#include - -#endif diff --git a/include/asm-cris/string.h b/include/asm-cris/string.h deleted file mode 100644 index 691190e99a27..000000000000 --- a/include/asm-cris/string.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _ASM_CRIS_STRING_H -#define _ASM_CRIS_STRING_H - -/* the optimized memcpy is in arch/cris/lib/string.c */ - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *, const void *, size_t); - -/* New and improved. In arch/cris/lib/memset.c */ - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *, int, size_t); - -#endif diff --git a/include/asm-cris/sync_serial.h b/include/asm-cris/sync_serial.h deleted file mode 100644 index d87c24df2b38..000000000000 --- a/include/asm-cris/sync_serial.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * ioctl defines for synchronous serial port driver - * - * Copyright (c) 2001-2003 Axis Communications AB - * - * Author: Mikael Starvik - * - */ - -#ifndef SYNC_SERIAL_H -#define SYNC_SERIAL_H - -#include - -#define SSP_SPEED _IOR('S', 0, unsigned int) -#define SSP_MODE _IOR('S', 1, unsigned int) -#define SSP_FRAME_SYNC _IOR('S', 2, unsigned int) -#define SSP_IPOLARITY _IOR('S', 3, unsigned int) -#define SSP_OPOLARITY _IOR('S', 4, unsigned int) -#define SSP_SPI _IOR('S', 5, unsigned int) -#define SSP_INBUFCHUNK _IOR('S', 6, unsigned int) - -/* Values for SSP_SPEED */ -#define SSP150 0 -#define SSP300 1 -#define SSP600 2 -#define SSP1200 3 -#define SSP2400 4 -#define SSP4800 5 -#define SSP9600 6 -#define SSP19200 7 -#define SSP28800 8 -#define SSP57600 9 -#define SSP115200 10 -#define SSP230400 11 -#define SSP460800 12 -#define SSP921600 13 -#define SSP3125000 14 -#define CODEC 15 - -#define FREQ_4MHz 0 -#define FREQ_2MHz 1 -#define FREQ_1MHz 2 -#define FREQ_512kHz 3 -#define FREQ_256kHz 4 -#define FREQ_128kHz 5 -#define FREQ_64kHz 6 -#define FREQ_32kHz 7 - -/* Used by application to set CODEC divider, word rate and frame rate */ -#define CODEC_VAL(freq, clk_per_sync, sync_per_frame) (CODEC | (freq << 8) | (clk_per_sync << 16) | (sync_per_frame << 28)) - -/* Used by driver to extract speed */ -#define GET_SPEED(x) (x & 0xff) -#define GET_FREQ(x) ((x & 0xff00) >> 8) -#define GET_WORD_RATE(x) (((x & 0x0fff0000) >> 16) - 1) -#define GET_FRAME_RATE(x) (((x & 0xf0000000) >> 28) - 1) - -/* Values for SSP_MODE */ -#define MASTER_OUTPUT 0 -#define SLAVE_OUTPUT 1 -#define MASTER_INPUT 2 -#define SLAVE_INPUT 3 -#define MASTER_BIDIR 4 -#define SLAVE_BIDIR 5 - -/* Values for SSP_FRAME_SYNC */ -#define NORMAL_SYNC 1 -#define EARLY_SYNC 2 -#define SECOND_WORD_SYNC 0x40000 - -#define BIT_SYNC 4 -#define WORD_SYNC 8 -#define EXTENDED_SYNC 0x10 - -#define SYNC_OFF 0x20 -#define SYNC_ON 0x40 -#define WORD_SIZE_8 0x80 -#define WORD_SIZE_12 0x100 -#define WORD_SIZE_16 0x200 -#define WORD_SIZE_24 0x400 -#define WORD_SIZE_32 0x800 -#define BIT_ORDER_LSB 0x1000 -#define BIT_ORDER_MSB 0x2000 -#define FLOW_CONTROL_ENABLE 0x4000 -#define FLOW_CONTROL_DISABLE 0x8000 -#define CLOCK_GATED 0x10000 -#define CLOCK_NOT_GATED 0x20000 - -/* Values for SSP_IPOLARITY and SSP_OPOLARITY */ -#define CLOCK_NORMAL 1 -#define CLOCK_INVERT 2 -#define CLOCK_INEGEDGE CLOCK_NORMAL -#define CLOCK_IPOSEDGE CLOCK_INVERT -#define FRAME_NORMAL 4 -#define FRAME_INVERT 8 -#define STATUS_NORMAL 0x10 -#define STATUS_INVERT 0x20 - -/* Values for SSP_SPI */ -#define SPI_MASTER 0 -#define SPI_SLAVE 1 - -/* Values for SSP_INBUFCHUNK */ -/* plain integer with the size of DMA chunks */ - -#endif diff --git a/include/asm-cris/system.h b/include/asm-cris/system.h deleted file mode 100644 index 5bcfe5a10907..000000000000 --- a/include/asm-cris/system.h +++ /dev/null @@ -1,88 +0,0 @@ -#ifndef __ASM_CRIS_SYSTEM_H -#define __ASM_CRIS_SYSTEM_H - -#include - -/* the switch_to macro calls resume, an asm function in entry.S which does the actual - * task switching. - */ - -extern struct task_struct *resume(struct task_struct *prev, struct task_struct *next, int); -#define switch_to(prev,next,last) last = resume(prev,next, \ - (int)&((struct task_struct *)0)->thread) - -#define barrier() __asm__ __volatile__("": : :"memory") -#define mb() barrier() -#define rmb() mb() -#define wmb() mb() -#define read_barrier_depends() do { } while(0) -#define set_mb(var, value) do { var = value; mb(); } while (0) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif - -#define iret() - -/* - * disable hlt during certain critical i/o operations - */ -#define HAVE_DISABLE_HLT -void disable_hlt(void); -void enable_hlt(void); - -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - /* since Etrax doesn't have any atomic xchg instructions, we need to disable - irq's (if enabled) and do it with move.d's */ - unsigned long flags,temp; - local_irq_save(flags); /* save flags, including irq enable bit and shut off irqs */ - switch (size) { - case 1: - *((unsigned char *)&temp) = x; - x = *(unsigned char *)ptr; - *(unsigned char *)ptr = *((unsigned char *)&temp); - break; - case 2: - *((unsigned short *)&temp) = x; - x = *(unsigned short *)ptr; - *(unsigned short *)ptr = *((unsigned short *)&temp); - break; - case 4: - temp = x; - x = *(unsigned long *)ptr; - *(unsigned long *)ptr = temp; - break; - } - local_irq_restore(flags); /* restore irq enable bit */ - return x; -} - -#include - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#ifndef CONFIG_SMP -#include -#endif - -#define arch_align_stack(x) (x) - -void default_idle(void); - -#endif diff --git a/include/asm-cris/termbits.h b/include/asm-cris/termbits.h deleted file mode 100644 index 66e1a7492a0c..000000000000 --- a/include/asm-cris/termbits.h +++ /dev/null @@ -1,234 +0,0 @@ -/* $Id: termbits.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $ */ - -#ifndef __ARCH_ETRAX100_TERMBITS_H__ -#define __ARCH_ETRAX100_TERMBITS_H__ - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -/* - * 3 2 1 - * 10 987 654 321 098 765 432 109 876 543 210 - * | | ||| CBAUD - * obaud - * - * ||CSIZE - * - * |CSTOP - * |CREAD - * |CPARENB - * - * |CPARODD - * |HUPCL - * |CLOCAL - * |CBAUDEX - * 10 987 654 321 098 765 432 109 876 543 210 - * | || || CIBAUD, IBSHIFT=16 - * ibaud - * |CMSPAR - * | CRTSCTS - * x x xxx xxx x x xx Free bits - */ - -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 - -/* Unsupported rates, but needed to avoid compile error. */ -#define B500000 0010005 -#define B576000 0010006 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 - -/* etrax supports these additional three baud rates */ -#define B921600 0010005 -#define B1843200 0010006 -#define B6250000 0010007 -/* ETRAX FS supports this as well */ -#define B12500000 0010010 -#define CIBAUD 002003600000 /* input baud rate (used in v32) */ -/* The values for CIBAUD bits are the same as the values for CBAUD and CBAUDEX - * shifted left IBSHIFT bits. - */ -#define IBSHIFT 16 -#define CMSPAR 010000000000 /* mark or space (stick) parity - PARODD=space*/ -#define CRTSCTS 020000000000 /* flow control */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif diff --git a/include/asm-cris/termios.h b/include/asm-cris/termios.h deleted file mode 100644 index b0124e6c2e41..000000000000 --- a/include/asm-cris/termios.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef _CRIS_TERMIOS_H -#define _CRIS_TERMIOS_H - -#include -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* _CRIS_TERMIOS_H */ diff --git a/include/asm-cris/thread_info.h b/include/asm-cris/thread_info.h deleted file mode 100644 index cee97f14af3b..000000000000 --- a/include/asm-cris/thread_info.h +++ /dev/null @@ -1,106 +0,0 @@ -/* thread_info.h: CRIS low-level thread information - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - * - * CRIS port by Axis Communications - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -#ifndef __ASSEMBLY__ -#include -#include -#include -#include -#endif - - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants must also be changed - */ -#ifndef __ASSEMBLY__ -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ - __u32 tls; /* TLS for this thread */ - - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF for user-thead - 0-0xFFFFFFFF for kernel-thread - */ - struct restart_block restart_block; - __u8 supervisor_stack[0]; -}; - -#endif - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) - -/* thread information allocation */ -#define alloc_thread_info(tsk) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1)) -#define free_thread_info(ti) free_pages((unsigned long) (ti), 1) - -#endif /* !__ASSEMBLY__ */ - -/* - * thread information flags - * - these are process state flags that various assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ -#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 17 -#define TIF_FREEZE 18 /* is freezing for suspend */ - -#define _TIF_SYSCALL_TRACE (1< - -/* - * We don't have a cycle-counter.. but we do not support SMP anyway where this is - * used so it does not matter. - */ - -typedef unsigned long long cycles_t; - -static inline cycles_t get_cycles(void) -{ - return 0; -} - -#endif diff --git a/include/asm-cris/tlb.h b/include/asm-cris/tlb.h deleted file mode 100644 index 7724246a2601..000000000000 --- a/include/asm-cris/tlb.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _CRIS_TLB_H -#define _CRIS_TLB_H - -#include - -#include - -/* - * cris doesn't need any special per-pte or - * per-vma handling.. - */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) - -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) -#include - -#endif diff --git a/include/asm-cris/tlbflush.h b/include/asm-cris/tlbflush.h deleted file mode 100644 index 20697e7ef4f2..000000000000 --- a/include/asm-cris/tlbflush.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef _CRIS_TLBFLUSH_H -#define _CRIS_TLBFLUSH_H - -#include -#include -#include -#include - -/* - * TLB flushing (implemented in arch/cris/mm/tlb.c): - * - * - flush_tlb() flushes the current mm struct TLBs - * - flush_tlb_all() flushes all processes TLBs - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(mm, start, end) flushes a range of pages - * - */ - -extern void __flush_tlb_all(void); -extern void __flush_tlb_mm(struct mm_struct *mm); -extern void __flush_tlb_page(struct vm_area_struct *vma, - unsigned long addr); - -#ifdef CONFIG_SMP -extern void flush_tlb_all(void); -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_page(struct vm_area_struct *vma, - unsigned long addr); -#else -#define flush_tlb_all __flush_tlb_all -#define flush_tlb_mm __flush_tlb_mm -#define flush_tlb_page __flush_tlb_page -#endif - -static inline void flush_tlb_range(struct vm_area_struct * vma, unsigned long start, unsigned long end) -{ - flush_tlb_mm(vma->vm_mm); -} - -static inline void flush_tlb(void) -{ - flush_tlb_mm(current->mm); -} - -#define flush_tlb_kernel_range(start, end) flush_tlb_all() - -#endif /* _CRIS_TLBFLUSH_H */ diff --git a/include/asm-cris/topology.h b/include/asm-cris/topology.h deleted file mode 100644 index 2ac613d32a89..000000000000 --- a/include/asm-cris/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_CRIS_TOPOLOGY_H -#define _ASM_CRIS_TOPOLOGY_H - -#include - -#endif /* _ASM_CRIS_TOPOLOGY_H */ diff --git a/include/asm-cris/types.h b/include/asm-cris/types.h deleted file mode 100644 index 5790262cbe8a..000000000000 --- a/include/asm-cris/types.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _ETRAX_TYPES_H -#define _ETRAX_TYPES_H - -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide, just like our other addresses. */ - -typedef u32 dma_addr_t; -typedef u32 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-cris/uaccess.h b/include/asm-cris/uaccess.h deleted file mode 100644 index ea11eaf0e922..000000000000 --- a/include/asm-cris/uaccess.h +++ /dev/null @@ -1,404 +0,0 @@ -/* - * Authors: Bjorn Wesen (bjornw@axis.com) - * Hans-Peter Nilsson (hp@axis.com) - */ - -/* Asm:s have been tweaked (within the domain of correctness) to give - satisfactory results for "gcc version 2.96 20000427 (experimental)". - - Check regularly... - - Register $r9 is chosen for temporaries, being a call-clobbered register - first in line to be used (notably for local blocks), not colliding with - parameter registers. */ - -#ifndef _CRIS_UACCESS_H -#define _CRIS_UACCESS_H - -#ifndef __ASSEMBLY__ -#include -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -/* addr_limit is the maximum accessible address for the task. we misuse - * the KERNEL_DS and USER_DS values to both assign and compare the - * addr_limit values through the equally misnamed get/set_fs macros. - * (see above) - */ - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define USER_DS MAKE_MM_SEG(TASK_SIZE) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) -#define __user_ok(addr,size) (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size))) -#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size))) -#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size)) - -#include - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - * - * As we use the same address space for kernel and user data on - * CRIS, we can just do these as direct assignments. (Of course, the - * exception handling means that it's no longer "just"...) - */ -#define get_user(x,ptr) \ - __get_user_check((x),(ptr),sizeof(*(ptr))) -#define put_user(x,ptr) \ - __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) - -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __put_user(x,ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) - -extern long __put_user_bad(void); - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: __put_user_asm(x,ptr,retval,"move.b"); break; \ - case 2: __put_user_asm(x,ptr,retval,"move.w"); break; \ - case 4: __put_user_asm(x,ptr,retval,"move.d"); break; \ - case 8: __put_user_asm_64(x,ptr,retval); break; \ - default: __put_user_bad(); \ - } \ -} while (0) - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: __get_user_asm(x,ptr,retval,"move.b"); break; \ - case 2: __get_user_asm(x,ptr,retval,"move.w"); break; \ - case 4: __get_user_asm(x,ptr,retval,"move.d"); break; \ - case 8: __get_user_asm_64(x,ptr,retval); break; \ - default: (x) = __get_user_bad(); \ - } \ -} while (0) - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __put_user_size((x),(ptr),(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) *__pu_addr = (ptr); \ - if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ - __put_user_size((x),__pu_addr,(size),__pu_err); \ - __pu_err; \ -}) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) - - - -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - __get_user_size(__gu_val,(ptr),(size),__gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT, __gu_val = 0; \ - const __typeof__(*(ptr)) *__gu_addr = (ptr); \ - if (access_ok(VERIFY_READ,__gu_addr,size)) \ - __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -/* More complex functions. Most are inline, but some call functions that - live in lib/usercopy.c */ - -extern unsigned long __copy_user(void __user *to, const void *from, unsigned long n); -extern unsigned long __copy_user_zeroing(void *to, const void __user *from, unsigned long n); -extern unsigned long __do_clear_user(void __user *to, unsigned long n); - -static inline unsigned long -__generic_copy_to_user(void __user *to, const void *from, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - return __copy_user(to,from,n); - return n; -} - -static inline unsigned long -__generic_copy_from_user(void *to, const void __user *from, unsigned long n) -{ - if (access_ok(VERIFY_READ, from, n)) - return __copy_user_zeroing(to,from,n); - return n; -} - -static inline unsigned long -__generic_clear_user(void __user *to, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - return __do_clear_user(to,n); - return n; -} - -static inline long -__strncpy_from_user(char *dst, const char __user *src, long count) -{ - return __do_strncpy_from_user(dst, src, count); -} - -static inline long -strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - res = __do_strncpy_from_user(dst, src, count); - return res; -} - - -/* Note that these expand awfully if made into switch constructs, so - don't do that. */ - -static inline unsigned long -__constant_copy_from_user(void *to, const void __user *from, unsigned long n) -{ - unsigned long ret = 0; - if (n == 0) - ; - else if (n == 1) - __asm_copy_from_user_1(to, from, ret); - else if (n == 2) - __asm_copy_from_user_2(to, from, ret); - else if (n == 3) - __asm_copy_from_user_3(to, from, ret); - else if (n == 4) - __asm_copy_from_user_4(to, from, ret); - else if (n == 5) - __asm_copy_from_user_5(to, from, ret); - else if (n == 6) - __asm_copy_from_user_6(to, from, ret); - else if (n == 7) - __asm_copy_from_user_7(to, from, ret); - else if (n == 8) - __asm_copy_from_user_8(to, from, ret); - else if (n == 9) - __asm_copy_from_user_9(to, from, ret); - else if (n == 10) - __asm_copy_from_user_10(to, from, ret); - else if (n == 11) - __asm_copy_from_user_11(to, from, ret); - else if (n == 12) - __asm_copy_from_user_12(to, from, ret); - else if (n == 13) - __asm_copy_from_user_13(to, from, ret); - else if (n == 14) - __asm_copy_from_user_14(to, from, ret); - else if (n == 15) - __asm_copy_from_user_15(to, from, ret); - else if (n == 16) - __asm_copy_from_user_16(to, from, ret); - else if (n == 20) - __asm_copy_from_user_20(to, from, ret); - else if (n == 24) - __asm_copy_from_user_24(to, from, ret); - else - ret = __generic_copy_from_user(to, from, n); - - return ret; -} - -/* Ditto, don't make a switch out of this. */ - -static inline unsigned long -__constant_copy_to_user(void __user *to, const void *from, unsigned long n) -{ - unsigned long ret = 0; - if (n == 0) - ; - else if (n == 1) - __asm_copy_to_user_1(to, from, ret); - else if (n == 2) - __asm_copy_to_user_2(to, from, ret); - else if (n == 3) - __asm_copy_to_user_3(to, from, ret); - else if (n == 4) - __asm_copy_to_user_4(to, from, ret); - else if (n == 5) - __asm_copy_to_user_5(to, from, ret); - else if (n == 6) - __asm_copy_to_user_6(to, from, ret); - else if (n == 7) - __asm_copy_to_user_7(to, from, ret); - else if (n == 8) - __asm_copy_to_user_8(to, from, ret); - else if (n == 9) - __asm_copy_to_user_9(to, from, ret); - else if (n == 10) - __asm_copy_to_user_10(to, from, ret); - else if (n == 11) - __asm_copy_to_user_11(to, from, ret); - else if (n == 12) - __asm_copy_to_user_12(to, from, ret); - else if (n == 13) - __asm_copy_to_user_13(to, from, ret); - else if (n == 14) - __asm_copy_to_user_14(to, from, ret); - else if (n == 15) - __asm_copy_to_user_15(to, from, ret); - else if (n == 16) - __asm_copy_to_user_16(to, from, ret); - else if (n == 20) - __asm_copy_to_user_20(to, from, ret); - else if (n == 24) - __asm_copy_to_user_24(to, from, ret); - else - ret = __generic_copy_to_user(to, from, n); - - return ret; -} - -/* No switch, please. */ - -static inline unsigned long -__constant_clear_user(void __user *to, unsigned long n) -{ - unsigned long ret = 0; - if (n == 0) - ; - else if (n == 1) - __asm_clear_1(to, ret); - else if (n == 2) - __asm_clear_2(to, ret); - else if (n == 3) - __asm_clear_3(to, ret); - else if (n == 4) - __asm_clear_4(to, ret); - else if (n == 8) - __asm_clear_8(to, ret); - else if (n == 12) - __asm_clear_12(to, ret); - else if (n == 16) - __asm_clear_16(to, ret); - else if (n == 20) - __asm_clear_20(to, ret); - else if (n == 24) - __asm_clear_24(to, ret); - else - ret = __generic_clear_user(to, n); - - return ret; -} - - -#define clear_user(to, n) \ -(__builtin_constant_p(n) ? \ - __constant_clear_user(to, n) : \ - __generic_clear_user(to, n)) - -#define copy_from_user(to, from, n) \ -(__builtin_constant_p(n) ? \ - __constant_copy_from_user(to, from, n) : \ - __generic_copy_from_user(to, from, n)) - -#define copy_to_user(to, from, n) \ -(__builtin_constant_p(n) ? \ - __constant_copy_to_user(to, from, n) : \ - __generic_copy_to_user(to, from, n)) - -/* We let the __ versions of copy_from/to_user inline, because they're often - * used in fast paths and have only a small space overhead. - */ - -static inline unsigned long -__generic_copy_from_user_nocheck(void *to, const void __user *from, - unsigned long n) -{ - return __copy_user_zeroing(to,from,n); -} - -static inline unsigned long -__generic_copy_to_user_nocheck(void __user *to, const void *from, - unsigned long n) -{ - return __copy_user(to,from,n); -} - -static inline unsigned long -__generic_clear_user_nocheck(void __user *to, unsigned long n) -{ - return __do_clear_user(to,n); -} - -/* without checking */ - -#define __copy_to_user(to,from,n) __generic_copy_to_user_nocheck((to),(from),(n)) -#define __copy_from_user(to,from,n) __generic_copy_from_user_nocheck((to),(from),(n)) -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user -#define __clear_user(to,n) __generic_clear_user_nocheck((to),(n)) - -#define strlen_user(str) strnlen_user((str), 0x7ffffffe) - -#endif /* __ASSEMBLY__ */ - -#endif /* _CRIS_UACCESS_H */ diff --git a/include/asm-cris/ucontext.h b/include/asm-cris/ucontext.h deleted file mode 100644 index eed6ad5eb3f2..000000000000 --- a/include/asm-cris/ucontext.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_CRIS_UCONTEXT_H -#define _ASM_CRIS_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* !_ASM_CRIS_UCONTEXT_H */ diff --git a/include/asm-cris/unaligned.h b/include/asm-cris/unaligned.h deleted file mode 100644 index 7b3f3fec567c..000000000000 --- a/include/asm-cris/unaligned.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_CRIS_UNALIGNED_H -#define _ASM_CRIS_UNALIGNED_H - -/* - * CRIS can do unaligned accesses itself. - */ -#include -#include - -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le - -#endif /* _ASM_CRIS_UNALIGNED_H */ diff --git a/include/asm-cris/unistd.h b/include/asm-cris/unistd.h deleted file mode 100644 index 76398ef87e9b..000000000000 --- a/include/asm-cris/unistd.h +++ /dev/null @@ -1,374 +0,0 @@ -#ifndef _ASM_CRIS_UNISTD_H_ -#define _ASM_CRIS_UNISTD_H_ - -/* - * This file contains the system call numbers, and stub macros for libc. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 - -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_getdents64 220 -#define __NR_fcntl64 221 -/* 223 is unused */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 -#define __NR_set_thread_area 243 -#define __NR_get_thread_area 244 -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 -/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */ -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 -#define __NR_vserver 273 -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -/* #define __NR_sys_setaltroot 285 */ -#define __NR_add_key 286 -#define __NR_request_key 287 -#define __NR_keyctl 288 -#define __NR_ioprio_set 289 -#define __NR_ioprio_get 290 -#define __NR_inotify_init 291 -#define __NR_inotify_add_watch 292 -#define __NR_inotify_rm_watch 293 -#define __NR_migrate_pages 294 -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 -#define __NR_set_robust_list 311 -#define __NR_get_robust_list 312 -#define __NR_splice 313 -#define __NR_sync_file_range 314 -#define __NR_tee 315 -#define __NR_vmsplice 316 -#define __NR_move_pages 317 -#define __NR_getcpu 318 -#define __NR_epoll_pwait 319 -#define __NR_utimensat 320 -#define __NR_signalfd 321 -#define __NR_timerfd_create 322 -#define __NR_eventfd 323 -#define __NR_fallocate 324 -#define __NR_timerfd_settime 325 -#define __NR_timerfd_gettime 326 - -#ifdef __KERNEL__ - -#define NR_syscalls 327 - -#include - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -#endif /* __KERNEL__ */ -#endif /* _ASM_CRIS_UNISTD_H_ */ diff --git a/include/asm-cris/user.h b/include/asm-cris/user.h deleted file mode 100644 index 73e60fcbcf38..000000000000 --- a/include/asm-cris/user.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef __ASM_CRIS_USER_H -#define __ASM_CRIS_USER_H - -#include -#include -#include -#include - -/* - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd). The file contents are as follows: - * - * upage: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page long. - * data: The data segment follows next. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * stack: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these in order to be able - * to write an integer number of pages. - */ - -struct user { - struct user_regs_struct regs; /* entire machine state */ - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - unsigned long u_ar0; /* help gdb find registers */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* __ASM_CRIS_USER_H */ -- cgit v1.2.3 From 00af5c69598212cf6cd4ecb4ca89785118aeecad Mon Sep 17 00:00:00 2001 From: roel kluin Date: Wed, 29 Oct 2008 15:55:53 -0400 Subject: cipso: unsigned buf_len cannot be negative unsigned buf_len cannot be negative Signed-off-by: Roel Kluin Signed-off-by: Paul Moore --- net/ipv4/cipso_ipv4.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c index 490e035c6d90..2e78f6bd9775 100644 --- a/net/ipv4/cipso_ipv4.c +++ b/net/ipv4/cipso_ipv4.c @@ -2063,9 +2063,10 @@ int cipso_v4_skbuff_setattr(struct sk_buff *skb, u32 opt_len; int len_delta; - buf_len = cipso_v4_genopt(buf, buf_len, doi_def, secattr); - if (buf_len < 0) - return buf_len; + ret_val = cipso_v4_genopt(buf, buf_len, doi_def, secattr); + if (ret_val < 0) + return ret_val; + buf_len = ret_val; opt_len = (buf_len + 3) & ~3; /* we overwrite any existing options to ensure that we have enough -- cgit v1.2.3 From f8a024796b2bbec3d1a4ad5aae6173cfb18226b4 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 29 Oct 2008 16:09:12 -0400 Subject: netlabel: Fix compiler warnings in netlabel_mgmt.c Fix the compiler warnings below, thanks to Andrew Morton for finding them. net/netlabel/netlabel_mgmt.c: In function `netlbl_mgmt_listentry': net/netlabel/netlabel_mgmt.c:268: warning: 'ret_val' might be used uninitialized in this function Signed-off-by: Paul Moore --- net/netlabel/netlabel_mgmt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netlabel/netlabel_mgmt.c b/net/netlabel/netlabel_mgmt.c index ee769ecaa13c..0a0ef17b2a40 100644 --- a/net/netlabel/netlabel_mgmt.c +++ b/net/netlabel/netlabel_mgmt.c @@ -265,7 +265,7 @@ add_failure: static int netlbl_mgmt_listentry(struct sk_buff *skb, struct netlbl_dom_map *entry) { - int ret_val; + int ret_val = 0; struct nlattr *nla_a; struct nlattr *nla_b; struct netlbl_af4list *iter4; -- cgit v1.2.3 From 10d0bd56966571d0324dfd9bbb8aa913a60bef5f Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 29 Oct 2008 01:03:01 +0200 Subject: iwlwifi: fix suspend to RAM in iwlwifi This patch fixes suspend to RAM after by moving notify_mac out of iwlwifi mutex http://bugzilla.kernel.org/show_bug.cgi?id=11845 Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Tested-by: Carlos R. Mafra Tested-by: Christian Borntraeger Cc: Rafael J. Wysocki Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 24a1aeb6448f..321dbc8c034a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2090,7 +2090,6 @@ static void iwl_alive_start(struct iwl_priv *priv) iwl4965_error_recovery(priv); iwl_power_update_mode(priv, 1); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status)) iwl4965_set_mode(priv, priv->iw_mode); @@ -2342,6 +2341,7 @@ static void iwl_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl_alive_start(priv); mutex_unlock(&priv->mutex); + ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl4965_bg_rf_kill(struct work_struct *work) -- cgit v1.2.3 From 87bf24f3d2e076468deaa5181d44184887072904 Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Wed, 29 Oct 2008 10:35:02 +0100 Subject: libertas: remove two libertas sparse warning Johannes Berg detected this two sparse warnings: drivers/net/wireless/libertas/cmd.c:609:16: warning: cast to restricted __le16 drivers/net/wireless/libertas/cmd.c:611:16: warning: cast to restricted __le16 ... but cmd.minlevel is "s8", so we can access it directly and hope for the sign-extension-code in the compiler to convert that to the "s16" type. Signed-off-by: Holger Schurig Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cmd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 297696de2da0..8265c7d25edc 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -605,9 +605,9 @@ int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, if (ret == 0) { *curlevel = le16_to_cpu(cmd.curlevel); if (minlevel) - *minlevel = le16_to_cpu(cmd.minlevel); + *minlevel = cmd.minlevel; if (maxlevel) - *maxlevel = le16_to_cpu(cmd.maxlevel); + *maxlevel = cmd.maxlevel; } lbs_deb_leave(LBS_DEB_CMD); -- cgit v1.2.3 From 48735d8d8bd701b1e0cd3d49c21e5e385ddcb077 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 29 Oct 2008 11:43:32 +0100 Subject: libertas: fix buffer overrun If somebody sends an invalid beacon/probe response, that can trash the whole BSS descriptor. The descriptor is, luckily, large enough so that it cannot scribble past the end of it; it's well above 400 bytes long. Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.24-2.6.27, bug present in some form since driver was added (2.6.22)] Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index 8f66903641b9..22c4c6110521 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -598,8 +598,8 @@ static int lbs_process_bss(struct bss_descriptor *bss, switch (elem->id) { case MFIE_TYPE_SSID: - bss->ssid_len = elem->len; - memcpy(bss->ssid, elem->data, elem->len); + bss->ssid_len = min_t(int, 32, elem->len); + memcpy(bss->ssid, elem->data, bss->ssid_len); lbs_deb_scan("got SSID IE: '%s', len %u\n", escape_essid(bss->ssid, bss->ssid_len), bss->ssid_len); -- cgit v1.2.3 From 85519a65fd1100ceede7318a89f77a219c69c6ac Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 29 Oct 2008 08:30:53 -0400 Subject: ath5k: correct misspelling in debug help Change "mamagement" to "management" Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 8f92d670f614..19980cbd5d5f 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -339,7 +339,7 @@ static struct { { ATH5K_DEBUG_BEACON, "beacon", "beacon handling" }, { ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" }, { ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" }, - { ATH5K_DEBUG_LED, "led", "LED mamagement" }, + { ATH5K_DEBUG_LED, "led", "LED management" }, { ATH5K_DEBUG_DUMP_RX, "dumprx", "print received skb content" }, { ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" }, { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" }, -- cgit v1.2.3 From 5dc5340cfc00097e79d9d787567d311e898aaa84 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Wed, 29 Oct 2008 17:19:08 +0100 Subject: rt2x00: Fix build error when mac80211=M rt2x00=Y Make menuconfig RT2X00 a tristate instead of boolean, otherwise we do not correctly inherit the mac80211 value on which RT2X00 depends, and makes it possible to compile rt2x00 into the kernel while mac80211 is a module. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index f839ce044afd..95511ac22470 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -1,5 +1,5 @@ menuconfig RT2X00 - bool "Ralink driver support" + tristate "Ralink driver support" depends on MAC80211 && WLAN_80211 && EXPERIMENTAL ---help--- This will enable the experimental support for the Ralink drivers, -- cgit v1.2.3 From 7d19267b8d1e12c0baebf9be96e04cddffe63f67 Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Wed, 29 Oct 2008 14:25:42 +0100 Subject: ath5k: Fix reset sequence for AR5212 in general and RF5111 in particular Take care to handle register 0xa228 exactly as in the HAL released by Atheros. This change is required to make ath5k work again on my system since commit 2203d6be (ath5k: Misc hw_reset updates), thus fixing a regression in 2.6.27 and therefore hopefully eligible for inclusion into a stable release. v2: Only overwrite initial register values on later revisions of AR5212 chips. v3: Use standard macros to manipulate the register. Signed-off-by: Elias Oltmanns Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/initvals.c | 2 ++ drivers/net/wireless/ath5k/reset.c | 22 +++++++--------------- 2 files changed, 9 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index ea2e1a20b499..ceaa6c475c06 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -806,6 +806,8 @@ static const struct ath5k_ini_mode ar5212_rf5111_ini_mode_end[] = { { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, { AR5K_PHY(642), { 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { 0xa228, + { 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5 } }, { 0xa23c, { 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } }, }; diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index 8f1886834e61..1b6d45b6772d 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -537,9 +537,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, mdelay(1); /* - * Write some more initial register settings + * Write some more initial register settings for revised chips */ - if (ah->ah_version == AR5K_AR5212) { + if (ah->ah_version == AR5K_AR5212 && + ah->ah_phy_revision > 0x41) { ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); if (channel->hw_value == CHANNEL_G) @@ -558,19 +559,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, else ath5k_hw_reg_write(ah, 0x00000000, 0x994c); - /* Some bits are disabled here, we know nothing about - * register 0xa228 yet, most of the times this ends up - * with a value 0x9b5 -haven't seen any dump with - * a different value- */ - /* Got this from decompiling binary HAL */ - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffffdff; - ath5k_hw_reg_write(ah, data, 0xa228); - - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffe03ff; - ath5k_hw_reg_write(ah, data, 0xa228); - data = 0; + /* Got this from legacy-hal */ + AR5K_REG_DISABLE_BITS(ah, 0xa228, 0x200); + + AR5K_REG_MASKED_BITS(ah, 0xa228, 0x800, 0xfffe03ff); /* Just write 0x9b5 ? */ /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ -- cgit v1.2.3 From 063279062a8c530cc90fb77797db16c49c905b26 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 29 Oct 2008 08:30:56 -0400 Subject: ath5k: honor FIF_BCN_PRBRESP_PROMISC in STA mode We were setting RX_FILTER_BEACON even after entering STA mode, which leads to a lot of unnecessary wakeups. This should fix the bug "Ath5k driver has too many interrupts per second at idle" at http://bugzilla.kernel.org/show_bug.cgi?id=11749. Signed-off-by: Bob Copeland Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index cfd4d052d666..9e47d727e220 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2942,10 +2942,8 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == NL80211_IFTYPE_STATION || - sc->opmode == NL80211_IFTYPE_ADHOC) { + if (sc->opmode == NL80211_IFTYPE_ADHOC) rfilt |= AR5K_RX_FILTER_BEACON; - } /* Set filters */ ath5k_hw_set_rx_filter(ah,rfilt); -- cgit v1.2.3 From adef199c61a224703dfa95c69d360c793ab2ea97 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 29 Oct 2008 08:30:57 -0400 Subject: ath5k: add self to MAINTAINERS I might as well be on the official list for ath5k. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 16202c8ac68f..185b84a51036 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -738,6 +738,8 @@ P: Nick Kossifidis M: mickflemm@gmail.com P: Luis R. Rodriguez M: mcgrof@gmail.com +P: Bob Copeland +M: me@bobcopeland.com L: linux-wireless@vger.kernel.org L: ath5k-devel@lists.ath5k.org S: Maintained -- cgit v1.2.3 From 1758ef68a07f42983371dc1d2bf0ae80b4d8ea16 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 29 Oct 2008 15:33:28 -0700 Subject: sparc64: remove byteshifting from out* helpers __raw_write avoids the need to byteswap, as we are reading from a host-endian area, just deref the pointers directly, taking care of alignment. As before, outsw must be called with a 2-byte aligned pointer. Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- arch/sparc64/lib/PeeCeeI.c | 139 +++++++++++++++------------------------------ 1 file changed, 47 insertions(+), 92 deletions(-) diff --git a/arch/sparc64/lib/PeeCeeI.c b/arch/sparc64/lib/PeeCeeI.c index 8b313f11bc8d..46053e6ddd7b 100644 --- a/arch/sparc64/lib/PeeCeeI.c +++ b/arch/sparc64/lib/PeeCeeI.c @@ -20,107 +20,62 @@ void outsw(unsigned long __addr, const void *src, unsigned long count) { void __iomem *addr = (void __iomem *) __addr; - if (count) { - u16 *ps = (u16 *)src; - u32 *pi; - - if (((u64)src) & 0x2) { - u16 val = le16_to_cpup(ps); - outw(val, addr); - ps++; - count--; - } - pi = (u32 *)ps; - while (count >= 2) { - u32 w = le32_to_cpup(pi); - - pi++; - outw(w >> 0, addr); - outw(w >> 16, addr); - count -= 2; - } - ps = (u16 *)pi; - if (count) { - u16 val = le16_to_cpup(ps); - outw(val, addr); - } + while (count--) { + __raw_writew(*(u16 *)src, addr); + src += sizeof(u16); } } void outsl(unsigned long __addr, const void *src, unsigned long count) { void __iomem *addr = (void __iomem *) __addr; + u32 l, l2; - if (count) { - if ((((u64)src) & 0x3) == 0) { - u32 *p = (u32 *)src; - while (count--) { - u32 val = cpu_to_le32p(p); - outl(val, addr); - p++; - } - } else { - u8 *pb; - u16 *ps = (u16 *)src; - u32 l = 0, l2; - u32 *pi; - - switch (((u64)src) & 0x3) { - case 0x2: - count -= 1; - l = cpu_to_le16p(ps) << 16; - ps++; - pi = (u32 *)ps; - while (count--) { - l2 = cpu_to_le32p(pi); - pi++; - outl(((l >> 16) | (l2 << 16)), addr); - l = l2; - } - ps = (u16 *)pi; - l2 = cpu_to_le16p(ps); - outl(((l >> 16) | (l2 << 16)), addr); - break; - - case 0x1: - count -= 1; - pb = (u8 *)src; - l = (*pb++ << 8); - ps = (u16 *)pb; - l2 = cpu_to_le16p(ps); - ps++; - l |= (l2 << 16); - pi = (u32 *)ps; - while (count--) { - l2 = cpu_to_le32p(pi); - pi++; - outl(((l >> 8) | (l2 << 24)), addr); - l = l2; - } - pb = (u8 *)pi; - outl(((l >> 8) | (*pb << 24)), addr); - break; + if (!count) + return; - case 0x3: - count -= 1; - pb = (u8 *)src; - l = (*pb++ << 24); - pi = (u32 *)pb; - while (count--) { - l2 = cpu_to_le32p(pi); - pi++; - outl(((l >> 24) | (l2 << 8)), addr); - l = l2; - } - ps = (u16 *)pi; - l2 = cpu_to_le16p(ps); - ps++; - pb = (u8 *)ps; - l2 |= (*pb << 16); - outl(((l >> 24) | (l2 << 8)), addr); - break; - } + switch (((unsigned long)src) & 0x3) { + case 0x0: + /* src is naturally aligned */ + while (count--) { + __raw_writel(*(u32 *)src, addr); + src += sizeof(u32); + } + break; + case 0x2: + /* 2-byte alignment */ + while (count--) { + l = (*(u16 *)src) << 16; + l |= *(u16 *)(src + sizeof(u16)); + __raw_writel(l, addr); + src += sizeof(u32); + } + break; + case 0x1: + /* Hold three bytes in l each time, grab a byte from l2 */ + l = (*(u8 *)src) << 24; + l |= (*(u16 *)(src + sizeof(u8))) << 8; + src += sizeof(u8) + sizeof(u16); + while (count--) { + l2 = *(u32 *)src; + l |= (l2 >> 24); + __raw_writel(l, addr); + l = l2 << 8; + src += sizeof(u32); + } + break; + case 0x3: + /* Hold a byte in l each time, grab 3 bytes from l2 */ + l = (*(u8 *)src) << 24; + src += sizeof(u8); + while (count--) { + l2 = *(u32 *)src; + l |= (l2 >> 8); + __raw_writel(l, addr); + l = l2 << 24; + src += sizeof(u32); } + break; } } -- cgit v1.2.3 From be376649344ba2c3d00021f8bbf64392aa01ad55 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 29 Oct 2008 15:34:39 -0700 Subject: dbri: check dma_alloc_coherent errors Needs to check for dma_alloc_coherent() allocation failure. Signed-off-by: FUJITA Tomonori Signed-off-by: David S. Miller --- sound/sparc/dbri.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index c257ad8bdfbc..23ed6f04a718 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -2534,6 +2534,8 @@ static int __devinit snd_dbri_create(struct snd_card *card, dbri->dma = dma_alloc_coherent(&op->dev, sizeof(struct dbri_dma), &dbri->dma_dvma, GFP_ATOMIC); + if (!dbri->dma) + return -ENOMEM; memset((void *)dbri->dma, 0, sizeof(struct dbri_dma)); dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08x)\n", -- cgit v1.2.3 From 12a9ee3cce256ae0f178d604f2c8764fb2942cfe Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 29 Oct 2008 15:35:24 -0700 Subject: rtc-m48t59: shift zero year to 1968 on sparc (rev 2) Shift the first year to 1968 for Sun SPARC machines. Move this logic from platform specific files to rtc driver as this fixes problems with calculating a century bit. Signed-off-by: Krzysztof Helt Tested-by: Alexander Beregalov Signed-off-by: David S. Miller --- arch/sparc/kernel/time.c | 27 ++++----------------------- arch/sparc64/kernel/time.c | 33 +++++---------------------------- drivers/rtc/rtc-m48t59.c | 34 ++++++++++++++++++++++++++++++---- 3 files changed, 39 insertions(+), 55 deletions(-) diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index 62c1d94cb434..00f7383c7657 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -119,35 +119,16 @@ static unsigned char mostek_read_byte(struct device *dev, u32 ofs) { struct platform_device *pdev = to_platform_device(dev); struct m48t59_plat_data *pdata = pdev->dev.platform_data; - void __iomem *regs = pdata->ioaddr; - unsigned char val = readb(regs + ofs); - - /* the year 0 is 1968 */ - if (ofs == pdata->offset + M48T59_YEAR) { - val += 0x68; - if ((val & 0xf) > 9) - val += 6; - } - return val; + + return readb(pdata->ioaddr + ofs); } static void mostek_write_byte(struct device *dev, u32 ofs, u8 val) { struct platform_device *pdev = to_platform_device(dev); struct m48t59_plat_data *pdata = pdev->dev.platform_data; - void __iomem *regs = pdata->ioaddr; - - if (ofs == pdata->offset + M48T59_YEAR) { - if (val < 0x68) - val += 0x32; - else - val -= 0x68; - if ((val & 0xf) > 9) - val += 6; - if ((val & 0xf0) > 0x9A) - val += 0x60; - } - writeb(val, regs + ofs); + + writeb(val, pdata->ioaddr + ofs); } static struct m48t59_plat_data m48t59_data = { diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 80d71a5ce1e3..dfd1b33e770a 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -503,39 +503,16 @@ static struct of_platform_driver bq4802_driver = { static unsigned char mostek_read_byte(struct device *dev, u32 ofs) { struct platform_device *pdev = to_platform_device(dev); - struct m48t59_plat_data *pdata = pdev->dev.platform_data; - void __iomem *regs; - unsigned char val; - - regs = (void __iomem *) pdev->resource[0].start; - val = readb(regs + ofs); - - /* the year 0 is 1968 */ - if (ofs == pdata->offset + M48T59_YEAR) { - val += 0x68; - if ((val & 0xf) > 9) - val += 6; - } - return val; + void __iomem *regs = (void __iomem *) pdev->resource[0].start; + + return readb(regs + ofs); } static void mostek_write_byte(struct device *dev, u32 ofs, u8 val) { struct platform_device *pdev = to_platform_device(dev); - struct m48t59_plat_data *pdata = pdev->dev.platform_data; - void __iomem *regs; - - regs = (void __iomem *) pdev->resource[0].start; - if (ofs == pdata->offset + M48T59_YEAR) { - if (val < 0x68) - val += 0x32; - else - val -= 0x68; - if ((val & 0xf) > 9) - val += 6; - if ((val & 0xf0) > 0x9A) - val += 0x60; - } + void __iomem *regs = (void __iomem *) pdev->resource[0].start; + writeb(val, regs + ofs); } diff --git a/drivers/rtc/rtc-m48t59.c b/drivers/rtc/rtc-m48t59.c index 04b63dab6932..43afb7ab5289 100644 --- a/drivers/rtc/rtc-m48t59.c +++ b/drivers/rtc/rtc-m48t59.c @@ -87,6 +87,10 @@ static int m48t59_rtc_read_time(struct device *dev, struct rtc_time *tm) dev_dbg(dev, "Century bit is enabled\n"); tm->tm_year += 100; /* one century */ } +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + tm->tm_year += 68; +#endif tm->tm_wday = bcd2bin(val & 0x07); tm->tm_hour = bcd2bin(M48T59_READ(M48T59_HOUR) & 0x3F); @@ -110,11 +114,20 @@ static int m48t59_rtc_set_time(struct device *dev, struct rtc_time *tm) struct m48t59_private *m48t59 = platform_get_drvdata(pdev); unsigned long flags; u8 val = 0; + int year = tm->tm_year; + +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + year -= 68; +#endif dev_dbg(dev, "RTC set time %04d-%02d-%02d %02d/%02d/%02d\n", - tm->tm_year + 1900, tm->tm_mon, tm->tm_mday, + year + 1900, tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); + if (year < 0) + return -EINVAL; + spin_lock_irqsave(&m48t59->lock, flags); /* Issue the WRITE command */ M48T59_SET_BITS(M48T59_CNTL_WRITE, M48T59_CNTL); @@ -125,9 +138,9 @@ static int m48t59_rtc_set_time(struct device *dev, struct rtc_time *tm) M48T59_WRITE((bin2bcd(tm->tm_mday) & 0x3F), M48T59_MDAY); /* tm_mon is 0-11 */ M48T59_WRITE((bin2bcd(tm->tm_mon + 1) & 0x1F), M48T59_MONTH); - M48T59_WRITE(bin2bcd(tm->tm_year % 100), M48T59_YEAR); + M48T59_WRITE(bin2bcd(year % 100), M48T59_YEAR); - if (pdata->type == M48T59RTC_TYPE_M48T59 && (tm->tm_year / 100)) + if (pdata->type == M48T59RTC_TYPE_M48T59 && (year / 100)) val = (M48T59_WDAY_CEB | M48T59_WDAY_CB); val |= (bin2bcd(tm->tm_wday) & 0x07); M48T59_WRITE(val, M48T59_WDAY); @@ -159,6 +172,10 @@ static int m48t59_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) M48T59_SET_BITS(M48T59_CNTL_READ, M48T59_CNTL); tm->tm_year = bcd2bin(M48T59_READ(M48T59_YEAR)); +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + tm->tm_year += 68; +#endif /* tm_mon is 0-11 */ tm->tm_mon = bcd2bin(M48T59_READ(M48T59_MONTH)) - 1; @@ -192,11 +209,20 @@ static int m48t59_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) struct rtc_time *tm = &alrm->time; u8 mday, hour, min, sec; unsigned long flags; + int year = tm->tm_year; + +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + year -= 68; +#endif /* If no irq, we don't support ALARM */ if (m48t59->irq == NO_IRQ) return -EIO; + if (year < 0) + return -EINVAL; + /* * 0xff means "always match" */ @@ -228,7 +254,7 @@ static int m48t59_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) spin_unlock_irqrestore(&m48t59->lock, flags); dev_dbg(dev, "RTC set alarm time %04d-%02d-%02d %02d/%02d/%02d\n", - tm->tm_year + 1900, tm->tm_mon, tm->tm_mday, + year + 1900, tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); return 0; } -- cgit v1.2.3 From 398cf93a394a6f2e42b8e61b1071fc32ecf18647 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 29 Oct 2008 15:36:00 -0700 Subject: sparc: use the new byteorder headers Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- arch/sparc/include/asm/byteorder.h | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h index bcd83aa351c5..5a70f137f1f7 100644 --- a/arch/sparc/include/asm/byteorder.h +++ b/arch/sparc/include/asm/byteorder.h @@ -4,15 +4,14 @@ #include #include -#ifdef __GNUC__ +#define __BIG_ENDIAN #ifdef CONFIG_SPARC32 #define __SWAB_64_THRU_32__ #endif #ifdef CONFIG_SPARC64 - -static inline __u16 ___arch__swab16p(const __u16 *addr) +static inline __u16 __arch_swab16p(const __u16 *addr) { __u16 ret; @@ -21,8 +20,9 @@ static inline __u16 ___arch__swab16p(const __u16 *addr) : "r" (addr), "i" (ASI_PL)); return ret; } +#define __arch_swab16p __arch_swab16p -static inline __u32 ___arch__swab32p(const __u32 *addr) +static inline __u32 __arch_swab32p(const __u32 *addr) { __u32 ret; @@ -31,8 +31,9 @@ static inline __u32 ___arch__swab32p(const __u32 *addr) : "r" (addr), "i" (ASI_PL)); return ret; } +#define __arch_swab32p __arch_swab32p -static inline __u64 ___arch__swab64p(const __u64 *addr) +static inline __u64 __arch_swab64p(const __u64 *addr) { __u64 ret; @@ -41,17 +42,10 @@ static inline __u64 ___arch__swab64p(const __u64 *addr) : "r" (addr), "i" (ASI_PL)); return ret; } - -#define __arch__swab16p(x) ___arch__swab16p(x) -#define __arch__swab32p(x) ___arch__swab32p(x) -#define __arch__swab64p(x) ___arch__swab64p(x) +#define __arch_swab64p __arch_swab64p #endif /* CONFIG_SPARC64 */ -#define __BYTEORDER_HAS_U64__ - -#endif - -#include +#include #endif /* _SPARC_BYTEORDER_H */ -- cgit v1.2.3 From 9a5415fbe87ad7b99ecf9b7ef6bf091c7479f2a4 Mon Sep 17 00:00:00 2001 From: Vojtech Pavlik Date: Thu, 30 Oct 2008 09:11:40 -0400 Subject: Input: elo - fix format string in elo driver Fix typo in format string. Signed-off-by: Vojtech Pavlik Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/elo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index d20689cdbd5d..8f38c5e55ce6 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c @@ -262,7 +262,7 @@ static int elo_setup_10(struct elo *elo) input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, " - "features: %x02x, controller: 0x%02x\n", + "features: 0x%02x, controller: 0x%02x\n", elo_types[(packet[1] -'0') & 0x03], packet[5], packet[4], packet[3], packet[7]); -- cgit v1.2.3 From 47b676c0e03dcfd88de91f6f24a06653cfdf32af Mon Sep 17 00:00:00 2001 From: Manish Katiyar Date: Thu, 30 Oct 2008 10:44:48 -0400 Subject: netlabel: Fix compilation warnings in net/netlabel/netlabel_addrlist.c Enable netlabel auditing functions only when CONFIG_AUDIT is set Signed-off-by: Manish Katiyar Signed-off-by: Paul Moore --- net/netlabel/netlabel_addrlist.c | 2 ++ net/netlabel/netlabel_addrlist.h | 22 ++++++++++++++++++++++ 2 files changed, 24 insertions(+) diff --git a/net/netlabel/netlabel_addrlist.c b/net/netlabel/netlabel_addrlist.c index b0925a303353..249f6b92f153 100644 --- a/net/netlabel/netlabel_addrlist.c +++ b/net/netlabel/netlabel_addrlist.c @@ -315,6 +315,7 @@ struct netlbl_af6list *netlbl_af6list_remove(const struct in6_addr *addr, * Audit Helper Functions */ +#ifdef CONFIG_AUDIT /** * netlbl_af4list_audit_addr - Audit an IPv4 address * @audit_buf: audit buffer @@ -386,3 +387,4 @@ void netlbl_af6list_audit_addr(struct audit_buffer *audit_buf, } } #endif /* IPv6 */ +#endif /* CONFIG_AUDIT */ diff --git a/net/netlabel/netlabel_addrlist.h b/net/netlabel/netlabel_addrlist.h index 0242bead405f..07ae7fd82be1 100644 --- a/net/netlabel/netlabel_addrlist.h +++ b/net/netlabel/netlabel_addrlist.h @@ -120,9 +120,19 @@ struct netlbl_af4list *netlbl_af4list_search(__be32 addr, struct netlbl_af4list *netlbl_af4list_search_exact(__be32 addr, __be32 mask, struct list_head *head); + +#ifdef CONFIG_AUDIT void netlbl_af4list_audit_addr(struct audit_buffer *audit_buf, int src, const char *dev, __be32 addr, __be32 mask); +#else +static inline void netlbl_af4list_audit_addr(struct audit_buffer *audit_buf, + int src, const char *dev, + __be32 addr, __be32 mask) +{ + return; +} +#endif #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) @@ -179,11 +189,23 @@ struct netlbl_af6list *netlbl_af6list_search(const struct in6_addr *addr, struct netlbl_af6list *netlbl_af6list_search_exact(const struct in6_addr *addr, const struct in6_addr *mask, struct list_head *head); + +#ifdef CONFIG_AUDIT void netlbl_af6list_audit_addr(struct audit_buffer *audit_buf, int src, const char *dev, const struct in6_addr *addr, const struct in6_addr *mask); +#else +static inline void netlbl_af6list_audit_addr(struct audit_buffer *audit_buf, + int src, + const char *dev, + const struct in6_addr *addr, + const struct in6_addr *mask) +{ + return; +} +#endif #endif /* IPV6 */ #endif -- cgit v1.2.3 From ae9b9403644f3ecc76867af042e7e1cfd5c099d0 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 30 Oct 2008 17:43:57 +0100 Subject: AMD IOMMU: fix detection of NP capable IOMMUs This patch changes the code to use IOMMU_CAP_NPCACHE as a shift and not as a mask. Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 3b346c6f5514..38e88d40ab10 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -50,7 +50,7 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom, /* returns !0 if the IOMMU is caching non-present entries in its TLB */ static int iommu_has_npcache(struct amd_iommu *iommu) { - return iommu->cap & IOMMU_CAP_NPCACHE; + return iommu->cap & (1UL << IOMMU_CAP_NPCACHE); } /**************************************************************************** -- cgit v1.2.3 From 61de800d33af585cb7e6f27b5cdd51029c6855cb Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 30 Oct 2008 20:15:22 +0000 Subject: [CIFS] fix error in smb_send2 smb_send2 exit logic was strange, and with the previous change could cause us to fail large smb writes when all of the smb was not sent as one chunk. Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 2 +- fs/cifs/file.c | 2 +- fs/cifs/transport.c | 7 +++++-- 3 files changed, 7 insertions(+), 4 deletions(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 843a85fb8b9a..d5eac48fc415 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1536,7 +1536,7 @@ CIFSSMBWrite(const int xid, struct cifsTconInfo *tcon, __u32 bytes_sent; __u16 byte_count; - /* cFYI(1,("write at %lld %d bytes",offset,count));*/ + /* cFYI(1, ("write at %lld %d bytes", offset, count));*/ if (tcon->ses == NULL) return -ECONNABORTED; diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 62d8bd8f14c0..ead1a3bb0256 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1824,7 +1824,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, pTcon = cifs_sb->tcon; pagevec_init(&lru_pvec, 0); - cFYI(DBG2, ("rpages: num pages %d", num_pages)); + cFYI(DBG2, ("rpages: num pages %d", num_pages)); for (i = 0; i < num_pages; ) { unsigned contig_pages; struct page *tmp_page; diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index ba4d66644ebf..ff8243a8fe3e 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -290,8 +290,11 @@ smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, if (rc < 0) break; - if (rc >= total_len) { - WARN_ON(rc > total_len); + if (rc == total_len) { + total_len = 0; + break; + } else if (rc > total_len) { + cERROR(1, ("sent %d requested %d", rc, total_len)); break; } if (rc == 0) { -- cgit v1.2.3 From 8d7c4203c681a3ec359eccff4e53bc8c0ccf403b Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 30 Oct 2008 13:48:33 -0400 Subject: nfsd: fix failure to set eof in readdir in some situations Before 14f7dd632011bb89c035722edd6ea0d90ca6b078 "[PATCH] Copy XFS readdir hack into nfsd code", readdir_cd->err was reset to eof before each call to vfs_readdir; afterwards, it is set only once. Similarly, c002a6c7977320f95b5edede5ce4e0eeecf291ff "[PATCH] Optimise NFS readdir hack slightly", can cause us to exit without nfserr_eof set. Fix this. This ensures the "eof" bit is set when needed in readdir replies. (The particular case I saw was an nfsv4 readdir of an empty directory, which returned with no entries (the protocol requires "." and ".." to be filtered out), but with eof unset.) Cc: David Woodhouse Cc: Al Viro Signed-off-by: J. Bruce Fields --- fs/nfsd/vfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 0bc56f6d9276..848a03e83a42 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -1912,6 +1912,7 @@ static int nfsd_buffered_readdir(struct file *file, filldir_t func, de = (struct buffered_dirent *)((char *)de + reclen); } offset = vfs_llseek(file, 0, SEEK_CUR); + cdp->err = nfserr_eof; if (!buf.full) break; } -- cgit v1.2.3 From d7dc61d0a70371b1c6557ea8ffbc60fff94c8168 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 23 Oct 2008 00:50:35 -0400 Subject: NLM: Set address family before calling nlm_host_rebooted() The nlm_host_rebooted() function uses nlm_cmp_addr() to find an nsm_handle that matches the rebooted peer. In order for this to work, the passed-in address must have a proper address family. This fixes a post-2.6.28 regression introduced by commit 781b61a6, which added AF_INET6 support to nlm_cmp_addr(). Before that commit, nlm_cmp_addr() didn't care about the address family; it compared only the sin_addr.s_addr field for equality. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- fs/lockd/svc4proc.c | 1 + fs/lockd/svcproc.c | 1 + 2 files changed, 2 insertions(+) diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c index 014f6ce48172..4dfdcbc6bf68 100644 --- a/fs/lockd/svc4proc.c +++ b/fs/lockd/svc4proc.c @@ -434,6 +434,7 @@ nlm4svc_proc_sm_notify(struct svc_rqst *rqstp, struct nlm_reboot *argp, * reclaim all locks we hold on this server. */ memset(&saddr, 0, sizeof(saddr)); + saddr.sin_family = AF_INET; saddr.sin_addr.s_addr = argp->addr; nlm_host_rebooted(&saddr, argp->mon, argp->len, argp->state); diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c index 548b0bb2b84d..3ca89e2a9381 100644 --- a/fs/lockd/svcproc.c +++ b/fs/lockd/svcproc.c @@ -466,6 +466,7 @@ nlmsvc_proc_sm_notify(struct svc_rqst *rqstp, struct nlm_reboot *argp, * reclaim all locks we hold on this server. */ memset(&saddr, 0, sizeof(saddr)); + saddr.sin_family = AF_INET; saddr.sin_addr.s_addr = argp->addr; nlm_host_rebooted(&saddr, argp->mon, argp->len, argp->state); -- cgit v1.2.3 From c4cd9ec48a2075a2692ff90a040e745b8f8cd83a Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Thu, 30 Oct 2008 18:16:14 -0400 Subject: powerpc/40x: Update 40x defconfigs Update the PowerPC 40x defconfigs for 2.6.28 Signed-off-by: Josh Boyer --- arch/powerpc/configs/40x/acadia_defconfig | 59 +++++++++----- arch/powerpc/configs/40x/ep405_defconfig | 83 +++++++++++++------ arch/powerpc/configs/40x/hcu4_defconfig | 125 ++++++++++++++++++++--------- arch/powerpc/configs/40x/kilauea_defconfig | 69 +++++++++++----- arch/powerpc/configs/40x/makalu_defconfig | 69 +++++++++++----- arch/powerpc/configs/40x/walnut_defconfig | 77 +++++++++++++----- arch/powerpc/configs/ppc40x_defconfig | 106 +++++++++++++++++++----- 7 files changed, 422 insertions(+), 166 deletions(-) diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig index 39bd9eb453f0..25572cc837ca 100644 --- a/arch/powerpc/configs/40x/acadia_defconfig +++ b/arch/powerpc/configs/40x/acadia_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Mon Oct 13 13:47:16 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 08:49:18 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_4xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -103,7 +103,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -117,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -161,8 +160,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC4xx_GPIO is not set CONFIG_ACADIA=y # CONFIG_EP405 is not set +# CONFIG_HCU4 is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set @@ -186,7 +187,6 @@ CONFIG_405EZ=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -200,6 +200,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -214,15 +216,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -309,6 +311,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -329,14 +332,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -516,6 +513,7 @@ CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -613,6 +611,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -646,6 +645,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -655,6 +655,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -663,10 +664,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -696,6 +698,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -733,6 +736,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -753,7 +757,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -806,15 +809,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -835,14 +844,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -915,6 +929,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index 2113ae2ab401..b80ba7aa3129 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 19:34:03 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 08:49:20 2008 # # CONFIG_PPC64 is not set @@ -19,14 +19,13 @@ CONFIG_4xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -88,7 +87,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -105,7 +103,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -155,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -163,11 +160,15 @@ CONFIG_CLASSIC_RCU=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC4xx_GPIO is not set +# CONFIG_ACADIA is not set CONFIG_EP405=y +# CONFIG_HCU4 is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +# CONFIG_PPC40x_SIMPLE is not set CONFIG_405GP=y CONFIG_IBM405_ERR77=y CONFIG_IBM405_ERR51=y @@ -188,7 +189,6 @@ CONFIG_IBM405_ERR51=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -202,6 +202,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -216,15 +218,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -311,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -331,14 +334,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -520,8 +517,12 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -542,18 +543,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -658,6 +663,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -707,6 +714,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -726,6 +736,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -733,6 +745,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -747,7 +760,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # USB Imaging devices # # CONFIG_USB_MDC800 is not set -CONFIG_USB_MON=y # # USB port drivers @@ -760,7 +772,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -777,7 +789,9 @@ CONFIG_USB_MON=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -787,6 +801,7 @@ CONFIG_USB_MON=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -795,10 +810,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -828,6 +844,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -865,6 +882,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -885,7 +903,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -938,14 +955,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -954,6 +978,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -965,14 +990,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1045,6 +1075,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig index 682fce02c73a..45dcb824503f 100644 --- a/arch/powerpc/configs/40x/hcu4_defconfig +++ b/arch/powerpc/configs/40x/hcu4_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26.5 -# Tue Sep 16 00:44:33 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 08:49:22 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_4xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -86,13 +87,11 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y -# CONFIG_LOGBUFFER is not set CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_COMPAT_BRK=y @@ -104,7 +103,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -113,10 +114,12 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -133,6 +136,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -147,22 +151,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC4xx_GPIO is not set +# CONFIG_ACADIA is not set # CONFIG_EP405 is not set CONFIG_HCU4=y # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +# CONFIG_PPC40x_SIMPLE is not set +CONFIG_405GPR=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -180,7 +187,6 @@ CONFIG_HCU4=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -194,6 +200,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -208,17 +216,19 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -229,6 +239,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -256,10 +267,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -304,6 +311,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -324,14 +332,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -346,6 +348,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -449,12 +453,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -481,7 +487,6 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -509,14 +514,17 @@ CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -531,18 +539,23 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -618,6 +631,8 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -634,8 +649,11 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -667,12 +685,9 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -682,6 +697,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -690,10 +706,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -723,6 +740,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -739,11 +757,11 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -754,13 +772,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -781,9 +799,9 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -809,6 +827,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -826,17 +846,36 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set @@ -847,14 +886,19 @@ CONFIG_DEBUG_BUGVERBOSE=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -893,6 +937,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -923,6 +971,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 565ed9666c54..e2f3695d9d0b 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 19:36:14 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 08:49:23 2008 # # CONFIG_PPC64 is not set @@ -19,14 +19,13 @@ CONFIG_4xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -88,7 +87,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -105,7 +103,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -155,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y # @@ -163,11 +160,15 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC4xx_GPIO is not set +# CONFIG_ACADIA is not set # CONFIG_EP405 is not set +# CONFIG_HCU4 is not set CONFIG_KILAUEA=y # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +# CONFIG_PPC40x_SIMPLE is not set CONFIG_405EX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -186,7 +187,6 @@ CONFIG_405EX=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -200,6 +200,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -214,15 +216,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -309,6 +311,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -329,14 +332,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -511,8 +508,12 @@ CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 CONFIG_IBM_NEW_EMAC_RGMII=y # CONFIG_IBM_NEW_EMAC_TAH is not set CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -609,6 +610,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -642,6 +645,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -651,6 +655,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -659,10 +664,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -692,6 +698,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -729,6 +736,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -749,7 +757,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -802,14 +809,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -818,6 +832,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -829,14 +844,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -909,6 +929,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 987a4481800f..413c778ecd7c 100644 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 19:38:39 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 08:49:25 2008 # # CONFIG_PPC64 is not set @@ -19,14 +19,13 @@ CONFIG_4xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -88,7 +87,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -105,7 +103,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -155,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y # @@ -163,11 +160,15 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC4xx_GPIO is not set +# CONFIG_ACADIA is not set # CONFIG_EP405 is not set +# CONFIG_HCU4 is not set # CONFIG_KILAUEA is not set CONFIG_MAKALU=y # CONFIG_WALNUT is not set # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +# CONFIG_PPC40x_SIMPLE is not set CONFIG_405EX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -186,7 +187,6 @@ CONFIG_405EX=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -200,6 +200,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -214,15 +216,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -309,6 +311,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -329,14 +332,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -511,8 +508,12 @@ CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 CONFIG_IBM_NEW_EMAC_RGMII=y # CONFIG_IBM_NEW_EMAC_TAH is not set CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -609,6 +610,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -642,6 +645,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -651,6 +655,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -659,10 +664,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -692,6 +698,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -729,6 +736,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -749,7 +757,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -802,14 +809,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -818,6 +832,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -829,14 +844,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -909,6 +929,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index aee79338f41f..5820e0a4fc55 100644 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 19:40:56 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 08:49:27 2008 # # CONFIG_PPC64 is not set @@ -19,14 +19,13 @@ CONFIG_4xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -88,7 +87,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -105,7 +103,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -155,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -163,11 +160,15 @@ CONFIG_CLASSIC_RCU=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC4xx_GPIO is not set +# CONFIG_ACADIA is not set # CONFIG_EP405 is not set +# CONFIG_HCU4 is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set CONFIG_WALNUT=y # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +# CONFIG_PPC40x_SIMPLE is not set CONFIG_405GP=y CONFIG_IBM405_ERR77=y CONFIG_IBM405_ERR51=y @@ -189,7 +190,6 @@ CONFIG_OF_RTC=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -203,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -217,15 +219,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -312,6 +314,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -332,14 +335,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -520,8 +517,12 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -542,18 +543,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -649,6 +654,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -689,10 +696,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -702,6 +714,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -710,10 +723,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -743,6 +757,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -780,6 +795,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -800,7 +816,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -853,14 +868,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -869,6 +891,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -880,14 +903,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -960,6 +988,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index 6a5b713a07e0..c15c91deb2ab 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 12:34:33 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 08:56:44 2008 # # CONFIG_PPC64 is not set @@ -19,14 +19,13 @@ CONFIG_4xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -37,6 +36,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -88,7 +88,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -105,7 +104,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -155,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y # @@ -163,14 +161,20 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_PPC4xx_GPIO=y CONFIG_XILINX_VIRTEX=y +CONFIG_ACADIA=y CONFIG_EP405=y +CONFIG_HCU4=y CONFIG_KILAUEA=y CONFIG_MAKALU=y CONFIG_WALNUT=y CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y +CONFIG_PPC40x_SIMPLE=y CONFIG_405GP=y CONFIG_405EX=y +CONFIG_405EZ=y +CONFIG_405GPR=y CONFIG_XILINX_VIRTEX_II_PRO=y CONFIG_XILINX_VIRTEX_4_FX=y CONFIG_IBM405_ERR77=y @@ -193,7 +197,6 @@ CONFIG_OF_RTC=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -207,6 +210,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -221,15 +226,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -339,6 +344,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +365,10 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -476,6 +481,7 @@ CONFIG_MTD_UBI_GLUEBI=y # # CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=m # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -556,8 +562,12 @@ CONFIG_IBM_NEW_EMAC_ZMII=y CONFIG_IBM_NEW_EMAC_RGMII=y # CONFIG_IBM_NEW_EMAC_TAH is not set CONFIG_IBM_NEW_EMAC_EMAC4=y +CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL=y +CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y +CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -578,18 +588,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -667,6 +681,8 @@ CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support @@ -693,6 +709,7 @@ CONFIG_I2C_CHARDEV=m # # I2C system bus drivers (mostly embedded / system-on-chip) # +CONFIG_I2C_GPIO=m CONFIG_I2C_IBM_IIC=m # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set @@ -725,6 +742,7 @@ CONFIG_I2C_IBM_IIC=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -733,7 +751,26 @@ CONFIG_I2C_IBM_IIC=m # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -752,6 +789,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -792,10 +832,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -805,6 +850,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -816,13 +862,14 @@ CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -855,6 +902,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -908,6 +956,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -967,7 +1016,6 @@ CONFIG_NLS_ISO8859_1=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set @@ -1023,14 +1071,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1039,6 +1094,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -1050,14 +1106,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1130,6 +1191,11 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set -- cgit v1.2.3 From 8531b7a805833649591fa324cadbab7d6b667f4b Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Thu, 30 Oct 2008 18:18:46 -0400 Subject: powerpc/44x: Update 44x defconfigs Update the PowerPC 44x defconfigs for 2.6.28 Signed-off-by: Josh Boyer --- arch/powerpc/configs/44x/arches_defconfig | 51 ++++++---- arch/powerpc/configs/44x/bamboo_defconfig | 77 ++++++++++----- arch/powerpc/configs/44x/canyonlands_defconfig | 61 +++++++----- arch/powerpc/configs/44x/ebony_defconfig | 77 ++++++++++----- arch/powerpc/configs/44x/katmai_defconfig | 77 ++++++++++----- arch/powerpc/configs/44x/rainier_defconfig | 73 ++++++++++----- arch/powerpc/configs/44x/sam440ep_defconfig | 110 ++++++++++++++++------ arch/powerpc/configs/44x/sequoia_defconfig | 78 ++++++++++----- arch/powerpc/configs/44x/taishan_defconfig | 77 ++++++++++----- arch/powerpc/configs/44x/warp_defconfig | 82 ++++++++++------ arch/powerpc/configs/ppc44x_defconfig | 125 +++++++++++++++++++------ 11 files changed, 630 insertions(+), 258 deletions(-) diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig index 70f46078eb6a..082158d591c5 100644 --- a/arch/powerpc/configs/44x/arches_defconfig +++ b/arch/powerpc/configs/44x/arches_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Wed Oct 1 15:54:57 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:16:04 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -103,7 +103,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -117,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y # @@ -175,6 +174,7 @@ CONFIG_ARCHES=y # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y +# CONFIG_PPC4xx_GPIO is not set CONFIG_460EX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -207,6 +207,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -221,15 +223,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -316,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -336,14 +339,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -440,8 +437,12 @@ CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 # CONFIG_IBM_NEW_EMAC_RGMII is not set CONFIG_IBM_NEW_EMAC_TAH=y CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -540,6 +541,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -573,6 +575,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -582,6 +585,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -590,10 +594,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -623,6 +628,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -659,6 +665,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -679,7 +686,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -732,15 +738,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -761,6 +773,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index e920693535af..f47c2f3420f6 100644 --- a/arch/powerpc/configs/44x/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 08:43:44 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:16:06 2008 # # CONFIG_PPC64 is not set @@ -23,14 +23,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -92,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -109,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -123,10 +123,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -159,6 +155,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -175,9 +172,13 @@ CONFIG_BAMBOO=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +CONFIG_PPC44x_SIMPLE=y +# CONFIG_PPC4xx_GPIO is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -197,7 +198,6 @@ CONFIG_IBM440EP_ERR42=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -211,6 +211,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -225,15 +227,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -320,6 +322,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -340,14 +343,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -450,8 +447,12 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -472,18 +473,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -579,6 +584,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -619,10 +626,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -632,6 +644,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -640,10 +653,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -673,6 +687,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -709,6 +724,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -729,7 +745,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -782,14 +797,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -798,6 +820,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -809,14 +832,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -889,6 +917,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index 74da5c7754a4..0694756ac759 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 08:46:14 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:16:08 2008 # # CONFIG_PPC64 is not set @@ -23,14 +23,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -88,7 +87,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -105,7 +103,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -155,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y # @@ -171,9 +168,13 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_ARCHES is not set CONFIG_CANYONLANDS=y +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +CONFIG_PPC44x_SIMPLE=y +# CONFIG_PPC4xx_GPIO is not set CONFIG_460EX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -201,11 +202,13 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -220,15 +223,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -315,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -335,14 +339,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -439,8 +437,12 @@ CONFIG_IBM_NEW_EMAC_ZMII=y CONFIG_IBM_NEW_EMAC_RGMII=y CONFIG_IBM_NEW_EMAC_TAH=y CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -538,6 +540,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -571,6 +575,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -580,6 +585,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -588,10 +594,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -621,6 +628,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -657,6 +665,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -677,7 +686,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -730,14 +738,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -746,6 +761,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -757,6 +773,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index 17615750b494..c9937578ef7f 100644 --- a/arch/powerpc/configs/44x/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 09:04:12 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:16:09 2008 # # CONFIG_PPC64 is not set @@ -22,14 +22,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -91,7 +90,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +122,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +154,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -174,9 +171,13 @@ CONFIG_EBONY=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +# CONFIG_PPC44x_SIMPLE is not set +# CONFIG_PPC4xx_GPIO is not set CONFIG_440GP=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -196,7 +197,6 @@ CONFIG_OF_RTC=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -210,6 +210,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -224,15 +226,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -318,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,14 +341,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -525,8 +522,12 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -547,18 +548,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -654,6 +659,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -694,10 +701,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -707,6 +719,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -715,10 +728,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -748,6 +762,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -795,6 +810,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -815,7 +831,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -869,14 +884,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -885,6 +907,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -896,14 +919,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -976,6 +1004,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index 7bc4082a1c93..e326ee8bd195 100644 --- a/arch/powerpc/configs/44x/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 09:06:51 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:16:11 2008 # # CONFIG_PPC64 is not set @@ -22,14 +22,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -87,7 +86,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -104,7 +102,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -118,10 +118,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -154,6 +150,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y # @@ -170,9 +167,13 @@ CONFIG_PPC4xx_PCI_EXPRESS=y CONFIG_KATMAI=y # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +CONFIG_PPC44x_SIMPLE=y +# CONFIG_PPC4xx_GPIO is not set CONFIG_440SPe=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -191,7 +192,6 @@ CONFIG_440SPe=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -205,6 +205,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -219,15 +221,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -314,6 +316,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -334,14 +337,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -446,8 +443,12 @@ CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -468,18 +469,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -576,6 +581,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -616,10 +623,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -629,6 +641,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -637,10 +650,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -670,6 +684,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -706,6 +721,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -726,7 +742,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -779,14 +794,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -795,6 +817,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -805,14 +828,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -885,6 +913,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig index 0479648a9141..927f829e2087 100644 --- a/arch/powerpc/configs/44x/rainier_defconfig +++ b/arch/powerpc/configs/44x/rainier_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 09:09:35 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:16:13 2008 # # CONFIG_PPC64 is not set @@ -22,14 +22,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -91,7 +90,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -108,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +122,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +154,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -174,9 +171,13 @@ CONFIG_CLASSIC_RCU=y # CONFIG_KATMAI is not set CONFIG_RAINIER=y # CONFIG_WARP is not set +# CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +CONFIG_PPC44x_SIMPLE=y +# CONFIG_PPC4xx_GPIO is not set CONFIG_440GRX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -195,7 +196,6 @@ CONFIG_440GRX=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -209,6 +209,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -223,15 +225,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -318,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,14 +341,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -532,18 +529,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -639,6 +640,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -679,10 +682,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -692,6 +700,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -700,10 +709,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -733,6 +743,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -780,6 +791,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -800,7 +812,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -854,14 +865,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -870,6 +888,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -894,14 +913,19 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -974,6 +998,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index 0ed2de05f4e8..15f48e03ec2e 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 09:12:48 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:16:15 2008 # # CONFIG_PPC64 is not set @@ -23,14 +23,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -93,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -109,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -123,10 +123,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -159,6 +155,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -175,9 +172,13 @@ CONFIG_SAM440EP=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +# CONFIG_PPC44x_SIMPLE is not set +# CONFIG_PPC4xx_GPIO is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -197,7 +198,6 @@ CONFIG_IBM440EP_ERR42=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -211,6 +211,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -225,15 +227,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -319,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -339,14 +342,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -536,8 +533,12 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -573,7 +574,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -607,6 +608,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -673,6 +675,7 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # @@ -761,6 +764,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -788,6 +794,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -828,6 +835,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -839,6 +847,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_ILI9320 is not set @@ -875,9 +884,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -895,6 +931,9 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -917,6 +956,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -924,6 +965,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -953,7 +995,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -966,7 +1007,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -984,7 +1025,9 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1031,12 +1074,15 @@ CONFIG_RTC_DRV_M41T80_WDT=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1045,6 +1091,7 @@ CONFIG_RTC_DRV_M41T80_WDT=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1058,7 +1105,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y @@ -1067,6 +1114,7 @@ CONFIG_REISERFS_FS=y # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1102,6 +1150,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1196,7 +1245,6 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1227,12 +1275,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1243,6 +1292,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index e40b1023265c..562beeaab53d 100644 --- a/arch/powerpc/configs/44x/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 09:15:13 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:16:16 2008 # # CONFIG_PPC64 is not set @@ -23,14 +23,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -92,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -109,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -123,10 +123,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -159,6 +155,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -175,9 +172,13 @@ CONFIG_SEQUOIA=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +CONFIG_PPC44x_SIMPLE=y +# CONFIG_PPC4xx_GPIO is not set CONFIG_440EPX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -205,11 +206,13 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -224,15 +227,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -319,6 +322,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -339,14 +343,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -527,8 +525,12 @@ CONFIG_IBM_NEW_EMAC_ZMII=y CONFIG_IBM_NEW_EMAC_RGMII=y # CONFIG_IBM_NEW_EMAC_TAH is not set CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -549,18 +551,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -656,6 +662,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -696,10 +704,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -709,6 +722,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -717,10 +731,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -750,6 +765,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -797,6 +813,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -817,7 +834,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -871,14 +887,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -887,6 +910,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -911,14 +935,19 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -991,6 +1020,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index 5075873bdb1b..427bb6a11be5 100644 --- a/arch/powerpc/configs/44x/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 09:17:48 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:16:18 2008 # # CONFIG_PPC64 is not set @@ -22,14 +22,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -91,7 +90,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -108,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +122,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +154,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -174,9 +171,13 @@ CONFIG_TAISHAN=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +CONFIG_PPC44x_SIMPLE=y +# CONFIG_PPC4xx_GPIO is not set CONFIG_440GX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -195,7 +196,6 @@ CONFIG_440GX=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -209,6 +209,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -223,15 +225,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -318,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,14 +341,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -528,8 +525,12 @@ CONFIG_IBM_NEW_EMAC_ZMII=y CONFIG_IBM_NEW_EMAC_RGMII=y CONFIG_IBM_NEW_EMAC_TAH=y CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -550,18 +551,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -657,6 +662,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -697,10 +704,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -710,6 +722,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -718,10 +731,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -751,6 +765,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -788,6 +803,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -808,7 +824,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -861,14 +876,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -877,6 +899,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -888,14 +911,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -968,6 +996,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index d9375a969c67..59cbd2761ed7 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 09:23:39 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:16:22 2008 # # CONFIG_PPC64 is not set @@ -23,14 +23,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -92,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -109,6 +107,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -122,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +153,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -173,9 +169,13 @@ CONFIG_CLASSIC_RCU=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set CONFIG_WARP=y +# CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +# CONFIG_PPC44x_SIMPLE is not set +# CONFIG_PPC4xx_GPIO is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -195,7 +195,6 @@ CONFIG_IBM440EP_ERR42=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -209,6 +208,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -223,15 +224,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -308,7 +309,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -322,10 +322,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -334,6 +336,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=y # CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set @@ -355,14 +358,8 @@ CONFIG_VLAN_8021Q=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -550,6 +547,9 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -629,6 +629,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support @@ -678,6 +679,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -742,6 +744,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -789,6 +794,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -805,6 +813,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -812,6 +821,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -840,7 +850,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -853,7 +862,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -869,13 +878,14 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y @@ -883,7 +893,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set @@ -894,6 +904,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -902,10 +913,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -938,6 +950,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set @@ -984,6 +997,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1043,7 +1057,6 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1096,14 +1109,21 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1112,6 +1132,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -1123,12 +1144,14 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1201,6 +1224,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index c7825dcbf415..55edbd545b61 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 10:01:31 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Oct 28 09:28:58 2008 # # CONFIG_PPC64 is not set @@ -23,14 +23,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -41,6 +40,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -92,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -109,7 +108,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -123,10 +124,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,7 +155,9 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PREEMPT_NOTIFIERS=y CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y # @@ -175,9 +174,13 @@ CONFIG_TAISHAN=y CONFIG_KATMAI=y CONFIG_RAINIER=y CONFIG_WARP=y +CONFIG_ARCHES=y CONFIG_CANYONLANDS=y +CONFIG_GLACIER=y CONFIG_YOSEMITE=y CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y +CONFIG_PPC44x_SIMPLE=y +CONFIG_PPC4xx_GPIO=y CONFIG_440EP=y CONFIG_440EPX=y CONFIG_440GRX=y @@ -206,7 +209,6 @@ CONFIG_OF_RTC=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -220,6 +222,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -234,15 +238,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -351,6 +355,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -371,14 +376,8 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -487,6 +486,7 @@ CONFIG_MTD_UBI_GLUEBI=y # # CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=m # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -600,8 +600,12 @@ CONFIG_IBM_NEW_EMAC_ZMII=y CONFIG_IBM_NEW_EMAC_RGMII=y CONFIG_IBM_NEW_EMAC_TAH=y CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -622,18 +626,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -721,6 +729,8 @@ CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support @@ -747,6 +757,7 @@ CONFIG_I2C_CHARDEV=m # # I2C system bus drivers (mostly embedded / system-on-chip) # +CONFIG_I2C_GPIO=m CONFIG_I2C_IBM_IIC=m # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set @@ -780,6 +791,7 @@ CONFIG_I2C_IBM_IIC=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -788,7 +800,26 @@ CONFIG_I2C_IBM_IIC=m # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -808,6 +839,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -857,6 +891,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -881,6 +918,12 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# Enable Host or Gadget support to see Inventra options +# # # USB Device Class drivers @@ -888,6 +931,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -916,7 +960,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -929,7 +972,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -946,7 +989,9 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -956,6 +1001,7 @@ CONFIG_USB_STORAGE=m # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -967,12 +1013,13 @@ CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=m -CONFIG_FS_MBCACHE=y +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1005,6 +1052,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1058,6 +1106,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1117,7 +1166,6 @@ CONFIG_NLS_ISO8859_1=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC_T10DIF=m @@ -1173,14 +1221,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1189,24 +1244,29 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1279,6 +1339,15 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y +CONFIG_KVM_BOOKE_HOST=y +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set -- cgit v1.2.3 From fba4acda35f3119328bcba28aacefae14245d2bb Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Thu, 30 Oct 2008 17:41:14 -0700 Subject: bonding: fix miimon failure counter During the rework of the mii monitor for: commit f0c76d61779b153dbfb955db3f144c62d02173c2 Author: Jay Vosburgh Date: Wed Jul 2 18:21:58 2008 -0700 bonding: refactor mii monitor I left out the increment of the link failure counter. This patch corrects that omission. Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 832739f38db4..85de1d04d1ee 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2376,6 +2376,9 @@ static void bond_miimon_commit(struct bonding *bond) continue; case BOND_LINK_DOWN: + if (slave->link_failure_count < UINT_MAX) + slave->link_failure_count++; + slave->link = BOND_LINK_DOWN; if (bond->params.mode == BOND_MODE_ACTIVEBACKUP || -- cgit v1.2.3 From a434e43f3d844192bc23bd7b408bac979c40efe7 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Thu, 30 Oct 2008 17:41:15 -0700 Subject: bonding: Clean up resource leaks This patch reworks the resource free logic performed at the time a bonding device is released. This (a) closes two resource leaks, one for workqueues and one for multicast lists, and (b) improves commonality of code between the "destroy one" and "destroy all" paths by performing final free activity via destructor instead of explicitly (and differently) in each path. "Sean E. Millichamp" reported the workqueue leak, and included a different patch. Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_main.c | 49 ++++++++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 18 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 85de1d04d1ee..a3efba59eee9 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1979,6 +1979,20 @@ void bond_destroy(struct bonding *bond) unregister_netdevice(bond->dev); } +static void bond_destructor(struct net_device *bond_dev) +{ + struct bonding *bond = bond_dev->priv; + + if (bond->wq) + destroy_workqueue(bond->wq); + + netif_addr_lock_bh(bond_dev); + bond_mc_list_destroy(bond); + netif_addr_unlock_bh(bond_dev); + + free_netdev(bond_dev); +} + /* * First release a slave and than destroy the bond if no more slaves iare left. * Must be under rtnl_lock when this function is called. @@ -4553,7 +4567,7 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params) bond_set_mode_ops(bond, bond->params.mode); - bond_dev->destructor = free_netdev; + bond_dev->destructor = bond_destructor; /* Initialize the device options */ bond_dev->tx_queue_len = 0; @@ -4592,20 +4606,6 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params) return 0; } -/* De-initialize device specific data. - * Caller must hold rtnl_lock. - */ -static void bond_deinit(struct net_device *bond_dev) -{ - struct bonding *bond = bond_dev->priv; - - list_del(&bond->bond_list); - -#ifdef CONFIG_PROC_FS - bond_remove_proc_entry(bond); -#endif -} - static void bond_work_cancel_all(struct bonding *bond) { write_lock_bh(&bond->lock); @@ -4627,6 +4627,22 @@ static void bond_work_cancel_all(struct bonding *bond) cancel_delayed_work(&bond->ad_work); } +/* De-initialize device specific data. + * Caller must hold rtnl_lock. + */ +static void bond_deinit(struct net_device *bond_dev) +{ + struct bonding *bond = bond_dev->priv; + + list_del(&bond->bond_list); + + bond_work_cancel_all(bond); + +#ifdef CONFIG_PROC_FS + bond_remove_proc_entry(bond); +#endif +} + /* Unregister and free all bond devices. * Caller must hold rtnl_lock. */ @@ -4638,9 +4654,6 @@ static void bond_free_all(void) struct net_device *bond_dev = bond->dev; bond_work_cancel_all(bond); - netif_addr_lock_bh(bond_dev); - bond_mc_list_destroy(bond); - netif_addr_unlock_bh(bond_dev); /* Release the bonded slaves */ bond_release_all(bond_dev); bond_destroy(bond); -- cgit v1.2.3 From ce39a800ea87c655de49af021c8b20ee323cb40d Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Thu, 30 Oct 2008 17:41:16 -0700 Subject: bonding: fix panic when taking bond interface down before removing module A panic was discovered with bonding when using mode 5 or 6 and trying to remove the slaves from the bond after the interface was taken down. When calling 'ifconfig bond0 down' the following happens: bond_close() bond_alb_deinitialize() tlb_deinitialize() kfree(bond_info->tx_hashtbl) bond_info->tx_hashtbl = NULL Unfortunately if there are still slaves in the bond, when removing the module the following happens: bonding_exit() bond_free_all() bond_release_all() bond_alb_deinit_slave() tlb_clear_slave() tx_hash_table = BOND_ALB_INFO(bond).tx_hashtbl u32 next_index = tx_hash_table[index].next As you might guess we panic when trying to access a few entries into the table that no longer exists. I experimented with several options (like moving the calls to tlb_deinitialize somewhere else), but it really makes the most sense to be part of the bond_close routine. It also didn't seem logical move tlb_clear_slave around too much, so the simplest option seems to add a check in tlb_clear_slave to make sure we haven't already wiped the tx_hashtbl away before searching for all the non-existent hash-table entries that used to point to the slave as the output interface. Signed-off-by: Andy Gospodarek Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_alb.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index ade5f3f6693b..87437c788476 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -169,11 +169,14 @@ static void tlb_clear_slave(struct bonding *bond, struct slave *slave, int save_ /* clear slave from tx_hashtbl */ tx_hash_table = BOND_ALB_INFO(bond).tx_hashtbl; - index = SLAVE_TLB_INFO(slave).head; - while (index != TLB_NULL_INDEX) { - u32 next_index = tx_hash_table[index].next; - tlb_init_table_entry(&tx_hash_table[index], save_load); - index = next_index; + /* skip this if we've already freed the tx hash table */ + if (tx_hash_table) { + index = SLAVE_TLB_INFO(slave).head; + while (index != TLB_NULL_INDEX) { + u32 next_index = tx_hash_table[index].next; + tlb_init_table_entry(&tx_hash_table[index], save_load); + index = next_index; + } } tlb_init_slave(slave); -- cgit v1.2.3 From 6824a105d4b699e3c08cc3df371de4b0480017b9 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Thu, 30 Oct 2008 08:59:33 +0100 Subject: myri10ge: fix stop/go mmio ordering Use mmiowb() to ensure "stop" and "go" commands are sent in order on ia64. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index b1556b2e404c..a5f428bcc0eb 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.3-1.371" +#define MYRI10GE_VERSION_STR "1.4.3-1.375" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index) if (tx->req == tx->done) { tx->queue_active = 0; put_be32(htonl(1), tx->send_stop); + mmiowb(); } __netif_tx_unlock(dev_queue); } @@ -2864,6 +2865,7 @@ again: if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) { tx->queue_active = 1; put_be32(htonl(1), tx->send_go); + mmiowb(); } tx->pkt_start++; if ((avail - count) < MXGEFW_MAX_SEND_DESC) { -- cgit v1.2.3 From 51ac3beffd4afaea4350526cf01fe74aaff25eff Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 29 Oct 2008 09:56:06 -0400 Subject: SMC91x: delete unused local variable "lp" Signed-off-by: Mike Frysinger Signed-off-by: Jeff Garzik --- drivers/net/smc91x.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index c70870e0fd61..6f9895d4e5bd 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2060,7 +2060,6 @@ static int smc_request_attrib(struct platform_device *pdev, struct net_device *ndev) { struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); - struct smc_local *lp = netdev_priv(ndev); if (!res) return 0; @@ -2075,7 +2074,6 @@ static void smc_release_attrib(struct platform_device *pdev, struct net_device *ndev) { struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); - struct smc_local *lp = netdev_priv(ndev); if (res) release_mem_region(res->start, ATTRIB_SIZE); -- cgit v1.2.3 From dc5596d920b504d263c7ca38bd76326179b13dee Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Wed, 29 Oct 2008 11:01:36 -0500 Subject: atl1: fix vlan tag regression Commit 401c0aabec4b97320f962a0161a846d230a6f7aa introduced a regression in the atl1 driver by storing the VLAN tag in the wrong TX descriptor field. This patch causes the VLAN tag to be stored in its proper location. Tested-by: Ramon Casellas Signed-off-by: Jay Cliburn Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 7 ++++--- drivers/net/atlx/atl1.h | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 3cf59a7f5a1c..246d92b42636 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -2310,7 +2310,8 @@ static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count, if (tpd != ptpd) memcpy(tpd, ptpd, sizeof(struct tx_packet_desc)); tpd->buffer_addr = cpu_to_le64(buffer_info->dma); - tpd->word2 = (cpu_to_le16(buffer_info->length) & + tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT); + tpd->word2 |= (cpu_to_le16(buffer_info->length) & TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT; /* @@ -2409,8 +2410,8 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | ((vlan_tag >> 9) & 0x8); ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; - ptpd->word3 |= (vlan_tag & TPD_VL_TAGGED_MASK) << - TPD_VL_TAGGED_SHIFT; + ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) << + TPD_VLANTAG_SHIFT; } tso = atl1_tso(adapter, skb, ptpd); diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h index a5015b14a429..ffa73fc8d95e 100644 --- a/drivers/net/atlx/atl1.h +++ b/drivers/net/atlx/atl1.h @@ -504,7 +504,7 @@ struct rx_free_desc { #define TPD_PKTNT_MASK 0x0001 #define TPD_PKTINT_SHIFT 15 #define TPD_VLANTAG_MASK 0xFFFF -#define TPD_VLAN_SHIFT 16 +#define TPD_VLANTAG_SHIFT 16 /* tpd word 3 bits 0:13 */ #define TPD_EOP_MASK 0x0001 -- cgit v1.2.3 From e83603fd4ace0bc8e2585cf9d450bb1dc80db448 Mon Sep 17 00:00:00 2001 From: Chunbo Luo Date: Tue, 28 Oct 2008 09:51:46 +0800 Subject: amd8111e: fix dma_free_coherent context Acoording commit aa24886e379d2b641c5117e178b15ce1d5d366ba, dma_free_coherent() need irqs enabled. This patch fix following warning messages: WARNING: at linux/arch/x86/kernel/pci-dma.c:376 dma_free_coherent+0xaa/0xb0() Call Trace: [] warn_on_slowpath+0x5f/0x90 [] ? __kfree_skb+0x3a/0xa0 [] ? discard_slab+0x23/0x40 [] dma_free_coherent+0xaa/0xb0 [] amd8111e_close+0x10f/0x1b0 [] dev_close+0x5e/0xb0 [] dev_change_flags+0xa1/0x1e0 [] ic_close_devs+0x36/0x4e [] ip_auto_config+0x581/0x10f3 [] ? kobject_add+0x69/0x90 [] ? kobject_get+0x1a/0x30 [] ? kobject_uevent+0xb/0x10 [] ? kset_register+0x52/0x60 [] ? kset_create_and_add+0x6b/0xa0 [] ? tcp_ca_find+0x24/0x50 [] ? ip_auto_config+0x0/0x10f3 [] _stext+0x3c/0x150 [] ? register_irq_proc+0xd3/0xf0 [] ? mb_cache_create+0x80/0x1f0 [] kernel_init+0x141/0x1b8 [] ? kernel_init+0x0/0x1b8 [] child_rip+0xa/0x11 [] ? kernel_init+0x0/0x1b8 [] ? kernel_init+0x0/0x1b8 [] ? child_rip+0x0/0x11 Signed-off-by: Chunbo Luo Signed-off-by: Jeff Garzik --- drivers/net/amd8111e.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index ba1be0b3a8c8..07a6697e3635 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -644,10 +644,6 @@ This function frees the transmiter and receiver descriptor rings. */ static void amd8111e_free_ring(struct amd8111e_priv* lp) { - - /* Free transmit and receive skbs */ - amd8111e_free_skbs(lp->amd8111e_net_dev); - /* Free transmit and receive descriptor rings */ if(lp->rx_ring){ pci_free_consistent(lp->pci_dev, @@ -1233,7 +1229,9 @@ static int amd8111e_close(struct net_device * dev) amd8111e_disable_interrupt(lp); amd8111e_stop_chip(lp); - amd8111e_free_ring(lp); + + /* Free transmit and receive skbs */ + amd8111e_free_skbs(lp->amd8111e_net_dev); netif_carrier_off(lp->amd8111e_net_dev); @@ -1243,6 +1241,7 @@ static int amd8111e_close(struct net_device * dev) spin_unlock_irq(&lp->lock); free_irq(dev->irq, dev); + amd8111e_free_ring(lp); /* Update the statistics before closing */ amd8111e_get_stats(dev); -- cgit v1.2.3 From 71527ef484426f2a4fb868da379b46f4408e80d6 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 27 Oct 2008 14:11:34 -0700 Subject: at91_ether: request/free GPIO for PHY interrupt When the at91_ether driver is using a GPIO for its PHY interrupt, be sure to request (and later, if needed, free) that GPIO. Signed-off-by: David Brownell Signed-off-by: Jeff Garzik --- drivers/net/arm/at91_ether.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 0fa53464efb2..6f431a887e7e 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -1080,7 +1080,8 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add init_timer(&lp->check_timer); lp->check_timer.data = (unsigned long)dev; lp->check_timer.function = at91ether_check_link; - } + } else if (lp->board_data.phy_irq_pin >= 32) + gpio_request(lp->board_data.phy_irq_pin, "ethernet_phy"); /* Display ethernet banner */ printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%s)\n", @@ -1167,6 +1168,9 @@ static int __devexit at91ether_remove(struct platform_device *pdev) struct net_device *dev = platform_get_drvdata(pdev); struct at91_private *lp = netdev_priv(dev); + if (lp->board_data.phy_irq_pin >= 32) + gpio_free(lp->board_data.phy_irq_pin); + unregister_netdev(dev); free_irq(dev->irq, dev); dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); -- cgit v1.2.3 From c132419e560a2ecd3c8cf77f9c37e103e74b3754 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 30 Oct 2008 18:17:06 -0700 Subject: gianfar: Fix race in TBI/SerDes configuration The init_phy() function attaches to the PHY, then configures the SerDes<->TBI link (in SGMII mode). The TBI is on the MDIO bus with the PHY (sort of) and is accessed via the gianfar's MDIO registers, using the functions gfar_local_mdio_read/write(), which don't do any locking. The previously attached PHY will start a work-queue on a timer, and probably an irq handler as well, which will talk to the PHY and thus use the MDIO bus. This uses phy_read/write(), which have locking, but not against the gfar_local_mdio versions. The result is that PHY code will try to use the MDIO bus at the same time as the SerDes setup code, corrupting the transfers. Setting up the SerDes before attaching to the PHY will insure that there is no race between the SerDes code and *our* PHY, but doesn't fix everything. Typically the PHYs for all gianfar devices are on the same MDIO bus, which is associated with the first gianfar device. This means that the first gianfar's SerDes code could corrupt the MDIO transfers for a different gianfar's PHY. The lock used by phy_read/write() is contained in the mii_bus structure, which is pointed to by the PHY. This is difficult to access from the gianfar drivers, as there is no link between a gianfar device and the mii_bus which shares the same MDIO registers. As far as the device layer and drivers are concerned they are two unrelated devices (which happen to share registers). Generally all gianfar devices' PHYs will be on the bus associated with the first gianfar. But this might not be the case, so simply locking the gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup code is going to use. We solve this by having the code that creates the gianfar platform device look in the device tree for an mdio device that shares the gianfar's registers. If one is found the ID of its platform device is saved in the gianfar's platform data. A new function in the gianfar mii code, gfar_get_miibus(), can use the bus ID to search through the platform devices for a gianfar_mdio device with the right ID. The platform device's driver data is the mii_bus structure, which the SerDes setup code can use to lock the current bus. Signed-off-by: Trent Piepho CC: Andy Fleming Signed-off-by: Jeff Garzik --- arch/powerpc/sysdev/fsl_soc.c | 26 ++++++++++++++++++++++++++ drivers/net/gianfar.c | 7 +++++++ drivers/net/gianfar_mii.c | 21 +++++++++++++++++++++ drivers/net/gianfar_mii.h | 3 +++ include/linux/fsl_devices.h | 3 ++- 5 files changed, 59 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 01b884b25696..26ecb96f9731 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -223,6 +223,8 @@ static int gfar_mdio_of_init_one(struct device_node *np) if (ret) return ret; + /* The gianfar device will try to use the same ID created below to find + * this bus, to coordinate register access (since they share). */ mdio_dev = platform_device_register_simple("fsl-gianfar_mdio", res.start&0xfffff, &res, 1); if (IS_ERR(mdio_dev)) @@ -394,6 +396,30 @@ static int __init gfar_of_init(void) of_node_put(mdio); } + /* Get MDIO bus controlled by this eTSEC, if any. Normally only + * eTSEC 1 will control an MDIO bus, not necessarily the same + * bus that its PHY is on ('mdio' above), so we can't just use + * that. What we do is look for a gianfar mdio device that has + * overlapping registers with this device. That's really the + * whole point, to find the device sharing our registers to + * coordinate access with it. + */ + for_each_compatible_node(mdio, NULL, "fsl,gianfar-mdio") { + if (of_address_to_resource(mdio, 0, &res)) + continue; + + if (res.start >= r[0].start && res.end <= r[0].end) { + /* Get the ID the mdio bus platform device was + * registered with. gfar_data.bus_id is + * different because it's for finding a PHY, + * while this is for finding a MII bus. + */ + gfar_data.mdio_bus = res.start&0xfffff; + of_node_put(mdio); + break; + } + } + ret = platform_device_add_data(gfar_dev, &gfar_data, sizeof(struct diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 64b201134fdb..249541a1814b 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -586,6 +586,10 @@ static void gfar_configure_serdes(struct net_device *dev) struct gfar_mii __iomem *regs = (void __iomem *)&priv->regs->gfar_mii_regs; int tbipa = gfar_read(&priv->regs->tbipa); + struct mii_bus *bus = gfar_get_miibus(priv); + + if (bus) + mutex_lock(&bus->mdio_lock); /* Single clk mode, mii mode off(for serdes communication) */ gfar_local_mdio_write(regs, tbipa, MII_TBICON, TBICON_CLK_SELECT); @@ -596,6 +600,9 @@ static void gfar_configure_serdes(struct net_device *dev) gfar_local_mdio_write(regs, tbipa, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000); + + if (bus) + mutex_unlock(&bus->mdio_lock); } static void init_registers(struct net_device *dev) diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index bf73eea98010..0e2595d24933 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -269,6 +269,27 @@ static struct device_driver gianfar_mdio_driver = { .remove = gfar_mdio_remove, }; +static int match_mdio_bus(struct device *dev, void *data) +{ + const struct gfar_private *priv = data; + const struct platform_device *pdev = to_platform_device(dev); + + return !strcmp(pdev->name, gianfar_mdio_driver.name) && + pdev->id == priv->einfo->mdio_bus; +} + +/* Given a gfar_priv structure, find the mii_bus controlled by this device (not + * necessarily the same as the bus the gfar's PHY is on), if one exists. + * Normally only the first gianfar controls a mii_bus. */ +struct mii_bus *gfar_get_miibus(const struct gfar_private *priv) +{ + /*const*/ struct device *d; + + d = bus_find_device(gianfar_mdio_driver.bus, NULL, (void *)priv, + match_mdio_bus); + return d ? dev_get_drvdata(d) : NULL; +} + int __init gfar_mdio_init(void) { return driver_register(&gianfar_mdio_driver); diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h index 2af28b16a0e2..02dc970ca1ff 100644 --- a/drivers/net/gianfar_mii.h +++ b/drivers/net/gianfar_mii.h @@ -18,6 +18,8 @@ #ifndef __GIANFAR_MII_H #define __GIANFAR_MII_H +struct gfar_private; /* forward ref */ + #define MIIMIND_BUSY 0x00000001 #define MIIMIND_NOTVALID 0x00000004 @@ -44,6 +46,7 @@ int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, int regnum, u16 value); int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum); +struct mii_bus *gfar_get_miibus(const struct gfar_private *priv); int __init gfar_mdio_init(void); void gfar_mdio_exit(void); #endif /* GIANFAR_PHY_H */ diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 4e625e0094c8..708bab58d8d0 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -49,7 +49,8 @@ struct gianfar_platform_data { u32 device_flags; /* board specific information */ u32 board_flags; - char bus_id[MII_BUS_ID_SIZE]; + int mdio_bus; /* Bus controlled by us */ + char bus_id[MII_BUS_ID_SIZE]; /* Bus PHY is on */ u32 phy_id; u8 mac_addr[6]; phy_interface_t interface; -- cgit v1.2.3 From bdb59f949d663b7e943fb5f40b2557af4314abf9 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 30 Oct 2008 18:17:07 -0700 Subject: gianfar: Don't reset TBI<->SerDes link if it's already up The link may be up already via the chip's reset strapping, or though action of U-Boot, or from the last time the interface was brought up. Resetting the link causes it to go down for several seconds. This can significantly increase the time from power-on to DHCP completion and a device being accessible to the network. Signed-off-by: Trent Piepho Acked-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 249541a1814b..83a5cb6aa23b 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -591,6 +591,14 @@ static void gfar_configure_serdes(struct net_device *dev) if (bus) mutex_lock(&bus->mdio_lock); + /* If the link is already up, we must already be ok, and don't need to + * configure and reset the TBI<->SerDes link. Maybe U-Boot configured + * everything for us? Resetting it takes the link down and requires + * several seconds for it to come back. + */ + if (gfar_local_mdio_read(regs, tbipa, MII_BMSR) & BMSR_LSTATUS) + goto done; + /* Single clk mode, mii mode off(for serdes communication) */ gfar_local_mdio_write(regs, tbipa, MII_TBICON, TBICON_CLK_SELECT); @@ -601,6 +609,7 @@ static void gfar_configure_serdes(struct net_device *dev) gfar_local_mdio_write(regs, tbipa, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000); + done: if (bus) mutex_unlock(&bus->mdio_lock); } -- cgit v1.2.3 From 1767c8f392857694899403a65942cc70b5b7d132 Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Wed, 22 Oct 2008 10:39:18 +0000 Subject: powerpc: Kexec exit should not use magic numbers Commit 54622f10a6aabb8bb2bdacf3dd070046f03dc246 ("powerpc: Support for relocatable kdump kernel") added a magic flag value in a register to tell purgatory that it should be a panic kernel. This part is wrong and is reverted by this commit. The kernel gets a list of memory blocks and a entry point from user space. Its job is to copy the blocks into place and then branch to the designated entry point (after turning "off" the mmu). The user space tool inserts a trampoline, called purgatory, that runs before the user supplied code. Its job is to establish the entry environment for the new kernel or other application based on the contents of memory. The purgatory code is compiled and embedded in the tool, where it is later patched using the elf symbol table using elf symbols. Since the tool knows it is creating a purgatory that will run after a kernel crash, it should just patch purgatory (or the kernel directly) if something needs to happen. Signed-off-by: Milton Miller Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/kdump.h | 6 ------ arch/powerpc/kernel/machine_kexec_64.c | 9 ++------- arch/powerpc/kernel/misc_64.S | 9 +++------ 3 files changed, 5 insertions(+), 19 deletions(-) diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h index a503da9d56f3..821ed48c10ed 100644 --- a/arch/powerpc/include/asm/kdump.h +++ b/arch/powerpc/include/asm/kdump.h @@ -9,12 +9,6 @@ * Reserve to the end of the FWNMI area, see head_64.S */ #define KDUMP_RESERVE_LIMIT 0x10000 /* 64K */ -/* - * Used to differentiate between relocatable kdump kernel and other - * kernels - */ -#define KDUMP_SIGNATURE 0xfeed1234 - #ifdef CONFIG_CRASH_DUMP #define KDUMP_TRAMPOLINE_START 0x0100 diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index e6efec788c4d..3c4ca046e854 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -255,14 +255,11 @@ static union thread_union kexec_stack /* Our assembly helper, in kexec_stub.S */ extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start, void *image, void *control, - void (*clear_all)(void), - unsigned long kdump_flag) ATTRIB_NORET; + void (*clear_all)(void)) ATTRIB_NORET; /* too late to fail here */ void default_machine_kexec(struct kimage *image) { - unsigned long kdump_flag = 0; - /* prepare control code if any */ /* @@ -275,8 +272,6 @@ void default_machine_kexec(struct kimage *image) if (crashing_cpu == -1) kexec_prepare_cpus(); - else - kdump_flag = KDUMP_SIGNATURE; /* switch to a staticly allocated stack. Based on irq stack code. * XXX: the task struct will likely be invalid once we do the copy! @@ -289,7 +284,7 @@ void default_machine_kexec(struct kimage *image) */ kexec_sequence(&kexec_stack, image->start, image, page_address(image->control_code_page), - ppc_md.hpte_clear_all, kdump_flag); + ppc_md.hpte_clear_all); /* NOTREACHED */ } diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index a243fd072a77..3053fe5c62f2 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -611,12 +611,10 @@ real_mode: /* assume normal blr return */ /* - * kexec_sequence(newstack, start, image, control, clear_all(), kdump_flag) + * kexec_sequence(newstack, start, image, control, clear_all()) * * does the grungy work with stack switching and real mode switches * also does simple calls to other code - * - * kdump_flag says whether the next kernel should be a kdump kernel. */ _GLOBAL(kexec_sequence) @@ -649,7 +647,7 @@ _GLOBAL(kexec_sequence) mr r29,r5 /* image (virt) */ mr r28,r6 /* control, unused */ mr r27,r7 /* clear_all() fn desc */ - mr r26,r8 /* kdump flag */ + mr r26,r8 /* spare */ lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ /* disable interrupts, we are overwriting kernel data next */ @@ -711,6 +709,5 @@ _GLOBAL(kexec_sequence) mr r4,r30 # start, aka phys mem offset mtlr 4 li r5,0 - mr r6,r26 /* kdump_flag */ - blr /* image->start(physid, image->start, 0, kdump_flag); */ + blr /* image->start(physid, image->start, 0); */ #endif /* CONFIG_KEXEC */ -- cgit v1.2.3 From 62a8bd6c9246c0e1f19dfb8fc65ad7c4f7cac8bb Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Wed, 22 Oct 2008 15:39:04 -0500 Subject: powerpc: Use is_kdump_kernel() linux/crash_dump.h defines is_kdump_kernel() to be used by code that needs to know if the previous kernel crashed instead of a (clean) boot or reboot. This updates the just added powerpc code to use it. This is needed for the next commit, which will remove __kdump_flag. Signed-off-by: Milton Miller Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/kdump.h | 2 -- arch/powerpc/kernel/iommu.c | 3 ++- arch/powerpc/platforms/cell/ras.c | 6 +++--- arch/powerpc/platforms/pseries/iommu.c | 4 ++-- 4 files changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h index 821ed48c10ed..b07ebb9784d3 100644 --- a/arch/powerpc/include/asm/kdump.h +++ b/arch/powerpc/include/asm/kdump.h @@ -20,8 +20,6 @@ #ifndef __ASSEMBLY__ -extern unsigned long __kdump_flag; - #if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_RELOCATABLE) extern void reserve_kdump_trampoline(void); extern void setup_kdump_trampoline(void); diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 3857d7e2af0c..45f47c97fd14 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -460,7 +461,7 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, static void iommu_table_clear(struct iommu_table *tbl) { - if (!__kdump_flag) { + if (!is_kdump_kernel()) { /* Clear the table in case firmware left allocations in it */ ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); return; diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 665af1c4195b..fdf088f2430e 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -13,15 +13,15 @@ #include #include #include +#include +#include #include #include #include -#include #include #include #include -#include #include "ras.h" @@ -112,7 +112,7 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order) int ret = -ENOMEM; unsigned long addr; - if (__kdump_flag) + if (is_kdump_kernel()) rtas_call(ptcal_stop_tok, 1, 1, NULL, nid); area = kmalloc(sizeof(*area), GFP_KERNEL); diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index d56491d182d3..c90817acb472 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -44,7 +45,6 @@ #include #include #include -#include #include "plpar_wrappers.h" @@ -292,7 +292,7 @@ static void iommu_table_setparms(struct pci_controller *phb, tbl->it_base = (unsigned long)__va(*basep); - if (!__kdump_flag) + if (!is_kdump_kernel()) memset((void *)tbl->it_base, 0, *sizep); tbl->it_busno = phb->bus->number; -- cgit v1.2.3 From 8b8b0cc1c736ddca39b60bb098bd0a23daaa495f Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Thu, 23 Oct 2008 18:41:09 +0000 Subject: powerpc/ppc64/kdump: Better flag for running relocatable The __kdump_flag ABI is overly constraining for future development. As of 2.6.27, the kernel entry point has 4 constraints: Offset 0 is the starting point for the master (boot) cpu (entered with r3 pointing to the device tree structure), offset 0x60 is code for the slave cpus (entered with r3 set to their device tree physical id), offset 0x20 is used by the iseries hypervisor, and secondary cpus must be well behaved when the first 256 bytes are copied to address 0. Placing the __kdump_flag at 0x18 is bad because: - It was taking the last 8 bytes before the iseries hypervisor data. - It was 8 bytes for a boolean flag - It had no way of identifying that the flag was present - It does leave any room for the master to add any additional code before branching, which hurts debug. - It will be unnecessarily hard for 32 bit code to be common (8 bytes) Now that we have eliminated the use of __kdump_flag in favor of the standard is_kdump_kernel(), this flag only controls run without relocating the kernel to PHYSICAL_START (0), so rename it __run_at_load. Move the flag to 0x5c, 1 word before the secondary cpu entry point at 0x60. Initialize it with "run0" to say it will run at 0 unless it is set to 1. It only exists if we are relocatable. Signed-off-by: Milton Miller Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 69489bd3210c..b4bcf5a930fa 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -97,12 +97,6 @@ __secondary_hold_spinloop: __secondary_hold_acknowledge: .llong 0x0 - /* This flag is set by purgatory if we should be a kdump kernel. */ - /* Do not move this variable as purgatory knows about it. */ - .globl __kdump_flag -__kdump_flag: - .llong 0x0 - #ifdef CONFIG_PPC_ISERIES /* * At offset 0x20, there is a pointer to iSeries LPAR data. @@ -112,6 +106,20 @@ __kdump_flag: .llong hvReleaseData-KERNELBASE #endif /* CONFIG_PPC_ISERIES */ +#ifdef CONFIG_CRASH_DUMP + /* This flag is set to 1 by a loader if the kernel should run + * at the loaded address instead of the linked address. This + * is used by kexec-tools to keep the the kdump kernel in the + * crash_kernel region. The loader is responsible for + * observing the alignment requirement. + */ + /* Do not move this variable as kexec-tools knows about it. */ + . = 0x5c + .globl __run_at_load +__run_at_load: + .long 0x72756e30 /* "run0" -- relocate to 0 by default */ +#endif + . = 0x60 /* * The following code is used to hold secondary processors @@ -1391,8 +1399,8 @@ _STATIC(__after_prom_start) lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */ sldi r25,r25,32 #ifdef CONFIG_CRASH_DUMP - ld r7,__kdump_flag-_stext(r26) - cmpldi cr0,r7,1 /* kdump kernel ? - stay where we are */ + lwz r7,__run_at_load-_stext(r26) + cmplwi cr0,r7,1 /* kdump kernel ? - stay where we are */ bne 1f add r25,r25,r26 #endif @@ -1416,11 +1424,11 @@ _STATIC(__after_prom_start) #ifdef CONFIG_CRASH_DUMP /* * Check if the kernel has to be running as relocatable kernel based on the - * variable __kdump_flag, if it is set the kernel is treated as relocatable + * variable __run_at_load, if it is set the kernel is treated as relocatable * kernel, otherwise it will be moved to PHYSICAL_START */ - ld r7,__kdump_flag-_stext(r26) - cmpldi cr0,r7,1 + lwz r7,__run_at_load-_stext(r26) + cmplwi cr0,r7,1 bne 3f li r5,__end_interrupts - _stext /* just copy interrupts */ -- cgit v1.2.3 From 2a4b9c5af82035c591adca951a9af1665ad1a2b0 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 22 Oct 2008 18:43:45 +0000 Subject: powerpc: Work around ld bug in older binutils Commit 549e8152de8039506f69c677a4546e5427aa6ae7 ("powerpc: Make the 64-bit kernel as a position-independent executable") added lines to vmlinux.lds.S to add the extra sections needed to implement a relocatable kernel. However, those lines seem to trigger a bug in older versions of GNU ld (such as 2.16.1) when building a non-relocatable kernel. Since ld 2.16.1 is still a popular choice for cross-toolchains, this adds an #ifdef to vmlinux.lds.S so the added lines are only included when building a relocatable kernel. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vmlinux.lds.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index b39c27ed7919..384dca5a9c1d 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -187,6 +187,7 @@ SECTIONS *(.machine.desc) __machine_desc_end = . ; } +#ifdef CONFIG_RELOCATABLE . = ALIGN(8); .dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { *(.dynsym) } .dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) } @@ -202,6 +203,7 @@ SECTIONS __rela_dyn_start = .; *(.rela*) } +#endif /* Fake ELF header containing RPA note; for addnote */ .fakeelf : AT(ADDR(.fakeelf) - LOAD_OFFSET) { *(.fakeelf) } -- cgit v1.2.3 From b160544cccb403310cf38ddb3ebc156ea454848a Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 22 Oct 2008 19:39:49 +0000 Subject: powerpc: Fix compiler warning for the relocatable kernel Fixes this warning: arch/powerpc/kernel/setup_64.c:447:5: warning: "kernstart_addr" is not defined which arises because PHYSICAL_START is no longer a constant when CONFIG_RELOCATABLE=y. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 843c0af210d0..169d74cef157 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -444,9 +444,9 @@ void __init setup_system(void) if (htab_address) printk("htab_address = 0x%p\n", htab_address); printk("htab_hash_mask = 0x%lx\n", htab_hash_mask); -#if PHYSICAL_START > 0 - printk("physical_start = 0x%lx\n", PHYSICAL_START); -#endif + if (PHYSICAL_START > 0) + printk("physical_start = 0x%lx\n", + PHYSICAL_START); printk("-----------------------------------------------------\n"); DBG(" <- setup_system()\n"); -- cgit v1.2.3 From 16c29d180becc5bdf92fd0fc7314a44a671b5f4e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 23 Oct 2008 00:42:36 +0000 Subject: powerpc: Fix swapcontext system for VSX + old ucontext size Since VSX support was added, we now have two sizes of ucontext_t; the older, smaller size without the extra VSX state, and the new larger size with the extra VSX state. A program using the sys_swapcontext system call and supplying smaller ucontext_t structures will currently get an EINVAL error if the task has used VSX (e.g. because of calling library code that uses VSX) and the old_ctx argument is non-NULL (i.e. the program is asking for its current context to be saved). Thus the program will start getting EINVAL errors on calls that previously worked. This commit changes this behaviour so that we don't send an EINVAL in this case. It will now return the smaller context but the VSX MSR bit will always be cleared to indicate that the ucontext_t doesn't include the extra VSX state, even if the task has executed VSX instructions. Both 32 and 64 bit cases are updated. [paulus@samba.org - also fix some access_ok() and get_user() calls] Thanks to Ben Herrenschmidt for noticing this problem. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/signal_32.c | 36 +++++++++++++++--------------------- arch/powerpc/kernel/signal_64.c | 33 +++++++++++++++------------------ 2 files changed, 30 insertions(+), 39 deletions(-) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 3e80aa32b8b0..a6a43103655e 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -410,7 +410,7 @@ inline unsigned long copy_fpr_from_user(struct task_struct *task, * altivec/spe instructions at some point. */ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, - int sigret) + int sigret, int ctx_has_vsx_region) { unsigned long msr = regs->msr; @@ -451,7 +451,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, * the saved MSR value to indicate that frame->mc_vregs * contains valid data */ - if (current->thread.used_vsr) { + if (current->thread.used_vsr && ctx_has_vsx_region) { __giveup_vsx(current); if (copy_vsx_to_user(&frame->mc_vsregs, current)) return 1; @@ -858,11 +858,11 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, frame = &rt_sf->uc.uc_mcontext; addr = frame; if (vdso32_rt_sigtramp && current->mm->context.vdso_base) { - if (save_user_regs(regs, frame, 0)) + if (save_user_regs(regs, frame, 0, 1)) goto badframe; regs->link = current->mm->context.vdso_base + vdso32_rt_sigtramp; } else { - if (save_user_regs(regs, frame, __NR_rt_sigreturn)) + if (save_user_regs(regs, frame, __NR_rt_sigreturn, 1)) goto badframe; regs->link = (unsigned long) frame->tramp; } @@ -936,12 +936,13 @@ long sys_swapcontext(struct ucontext __user *old_ctx, int ctx_size, int r6, int r7, int r8, struct pt_regs *regs) { unsigned char tmp; + int ctx_has_vsx_region = 0; #ifdef CONFIG_PPC64 unsigned long new_msr = 0; if (new_ctx && - __get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR])) + get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR])) return -EFAULT; /* * Check that the context is not smaller than the original @@ -956,16 +957,9 @@ long sys_swapcontext(struct ucontext __user *old_ctx, if ((ctx_size < sizeof(struct ucontext)) && (new_msr & MSR_VSX)) return -EINVAL; -#ifdef CONFIG_VSX - /* - * If userspace doesn't provide enough room for VSX data, - * but current thread has used VSX, we don't have anywhere - * to store the full context back into. - */ - if ((ctx_size < sizeof(struct ucontext)) && - (current->thread.used_vsr && old_ctx)) - return -EINVAL; -#endif + /* Does the context have enough room to store VSX data? */ + if (ctx_size >= sizeof(struct ucontext)) + ctx_has_vsx_region = 1; #else /* Context size is for future use. Right now, we only make sure * we are passed something we understand @@ -985,17 +979,17 @@ long sys_swapcontext(struct ucontext __user *old_ctx, */ mctx = (struct mcontext __user *) ((unsigned long) &old_ctx->uc_mcontext & ~0xfUL); - if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx)) - || save_user_regs(regs, mctx, 0) + if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size) + || save_user_regs(regs, mctx, 0, ctx_has_vsx_region) || put_sigset_t(&old_ctx->uc_sigmask, ¤t->blocked) || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs)) return -EFAULT; } if (new_ctx == NULL) return 0; - if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx)) + if (!access_ok(VERIFY_READ, new_ctx, ctx_size) || __get_user(tmp, (u8 __user *) new_ctx) - || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1)) + || __get_user(tmp, (u8 __user *) new_ctx + ctx_size - 1)) return -EFAULT; /* @@ -1196,11 +1190,11 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka, goto badframe; if (vdso32_sigtramp && current->mm->context.vdso_base) { - if (save_user_regs(regs, &frame->mctx, 0)) + if (save_user_regs(regs, &frame->mctx, 0, 1)) goto badframe; regs->link = current->mm->context.vdso_base + vdso32_sigtramp; } else { - if (save_user_regs(regs, &frame->mctx, __NR_sigreturn)) + if (save_user_regs(regs, &frame->mctx, __NR_sigreturn, 1)) goto badframe; regs->link = (unsigned long) frame->mctx.tramp; } diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index c6a8f2326b6f..e132891d3cea 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -74,7 +74,8 @@ static const char fmt64[] = KERN_INFO \ */ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, - int signr, sigset_t *set, unsigned long handler) + int signr, sigset_t *set, unsigned long handler, + int ctx_has_vsx_region) { /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the * process never used altivec yet (MSR_VEC is zero in pt_regs of @@ -121,7 +122,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, * then out to userspace. Update v_regs to point after the * VMX data. */ - if (current->thread.used_vsr) { + if (current->thread.used_vsr && ctx_has_vsx_region) { __giveup_vsx(current); v_regs += ELF_NVRREG; err |= copy_vsx_to_user(v_regs, current); @@ -282,9 +283,10 @@ int sys_swapcontext(struct ucontext __user *old_ctx, unsigned char tmp; sigset_t set; unsigned long new_msr = 0; + int ctx_has_vsx_region = 0; if (new_ctx && - __get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR])) + get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR])) return -EFAULT; /* * Check that the context is not smaller than the original @@ -299,28 +301,23 @@ int sys_swapcontext(struct ucontext __user *old_ctx, if ((ctx_size < sizeof(struct ucontext)) && (new_msr & MSR_VSX)) return -EINVAL; -#ifdef CONFIG_VSX - /* - * If userspace doesn't provide enough room for VSX data, - * but current thread has used VSX, we don't have anywhere - * to store the full context back into. - */ - if ((ctx_size < sizeof(struct ucontext)) && - (current->thread.used_vsr && old_ctx)) - return -EINVAL; -#endif + /* Does the context have enough room to store VSX data? */ + if (ctx_size >= sizeof(struct ucontext)) + ctx_has_vsx_region = 1; + if (old_ctx != NULL) { - if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx)) - || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0) + if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size) + || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0, + ctx_has_vsx_region) || __copy_to_user(&old_ctx->uc_sigmask, ¤t->blocked, sizeof(sigset_t))) return -EFAULT; } if (new_ctx == NULL) return 0; - if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx)) + if (!access_ok(VERIFY_READ, new_ctx, ctx_size) || __get_user(tmp, (u8 __user *) new_ctx) - || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1)) + || __get_user(tmp, (u8 __user *) new_ctx + ctx_size - 1)) return -EFAULT; /* @@ -423,7 +420,7 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, &frame->uc.uc_stack.ss_flags); err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, NULL, - (unsigned long)ka->sa.sa_handler); + (unsigned long)ka->sa.sa_handler, 1); err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); if (err) goto badframe; -- cgit v1.2.3 From 6098e2ee14849e0819ffa887ebf470dcfad4a2be Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Sun, 26 Oct 2008 21:51:25 +0000 Subject: OF-device: Don't overwrite numa_node in device registration Currently, the numa_node of OF-devices will be overwritten during device_register, which simply sets the node to -1. On cell machines, this means that devices can't find their IOMMU, which is referenced through the device's numa node. Set the numa node for OF devices with no parent, and use the lower-level device_initialize and device_add functions, so that the node is preserved. We can remove the call to set_dev_node in of_device_alloc, as it will be overwritten during register. Signed-off-by: Jeremy Kerr Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/of_device.c | 1 - drivers/of/device.c | 11 ++++++++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c index 93ae5b169f41..f3c9cae01dd5 100644 --- a/arch/powerpc/kernel/of_device.c +++ b/arch/powerpc/kernel/of_device.c @@ -78,7 +78,6 @@ struct of_device *of_device_alloc(struct device_node *np, dev->dev.parent = parent; dev->dev.release = of_release_dev; dev->dev.archdata.of_node = np; - set_dev_node(&dev->dev, of_node_to_nid(np)); if (bus_id) strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE); diff --git a/drivers/of/device.c b/drivers/of/device.c index 51e5214071da..224ae6bc67b6 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -105,7 +105,16 @@ EXPORT_SYMBOL(of_release_dev); int of_device_register(struct of_device *ofdev) { BUG_ON(ofdev->node == NULL); - return device_register(&ofdev->dev); + + device_initialize(&ofdev->dev); + + /* device_add will assume that this device is on the same node as + * the parent. If there is no parent defined, set the node + * explicitly */ + if (!ofdev->dev.parent) + set_dev_node(&ofdev->dev, of_node_to_nid(ofdev->node)); + + return device_add(&ofdev->dev); } EXPORT_SYMBOL(of_device_register); -- cgit v1.2.3 From e90a13184600ec756875238ad130e2f205cd9a1b Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Mon, 27 Oct 2008 19:48:17 +0000 Subject: powerpc/pci: Properly allocate bus resources for hotplug PHBs Resources for PHB's that are dynamically added to a system are not properly allocated in the resource tree. Not having these resources allocated causes an oops when removing the PHB when we try to release them. The diff appears a bit messy, this is mainly due to moving everything one tab to the left in the pcibios_allocate_bus_resources routine. The functionality change in this routine is only that the list_for_each_entry() loop is pulled out and moved to the necessary calling routine. Signed-off-by: Nathan Fontenot Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/pci.h | 2 + arch/powerpc/kernel/pci-common.c | 110 ++++++++++++++--------------- arch/powerpc/platforms/pseries/pci_dlpar.c | 2 + 3 files changed, 59 insertions(+), 55 deletions(-) diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index 39d547fde956..57a2a494886b 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -208,6 +208,8 @@ extern void pcibios_setup_new_device(struct pci_dev *dev); extern void pcibios_claim_one_bus(struct pci_bus *b); +extern void pcibios_allocate_bus_resources(struct pci_bus *bus); + extern void pcibios_resource_survey(void); extern struct pci_controller *init_phb_dynamic(struct device_node *dn); diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 1ec73938a00f..f36936d9fda3 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1239,69 +1239,66 @@ static int __init reparent_resources(struct resource *parent, * as well. */ -static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) +void pcibios_allocate_bus_resources(struct pci_bus *bus) { - struct pci_bus *bus; + struct pci_bus *b; int i; struct resource *res, *pr; - /* Depth-First Search on bus tree */ - list_for_each_entry(bus, bus_list, node) { - for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { - if ((res = bus->resource[i]) == NULL || !res->flags - || res->start > res->end) - continue; - if (bus->parent == NULL) - pr = (res->flags & IORESOURCE_IO) ? - &ioport_resource : &iomem_resource; - else { - /* Don't bother with non-root busses when - * re-assigning all resources. We clear the - * resource flags as if they were colliding - * and as such ensure proper re-allocation - * later. + for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { + if ((res = bus->resource[i]) == NULL || !res->flags + || res->start > res->end) + continue; + if (bus->parent == NULL) + pr = (res->flags & IORESOURCE_IO) ? + &ioport_resource : &iomem_resource; + else { + /* Don't bother with non-root busses when + * re-assigning all resources. We clear the + * resource flags as if they were colliding + * and as such ensure proper re-allocation + * later. + */ + if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC) + goto clear_resource; + pr = pci_find_parent_resource(bus->self, res); + if (pr == res) { + /* this happens when the generic PCI + * code (wrongly) decides that this + * bridge is transparent -- paulus */ - if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC) - goto clear_resource; - pr = pci_find_parent_resource(bus->self, res); - if (pr == res) { - /* this happens when the generic PCI - * code (wrongly) decides that this - * bridge is transparent -- paulus - */ - continue; - } + continue; } + } - DBG("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx " - "[0x%x], parent %p (%s)\n", - bus->self ? pci_name(bus->self) : "PHB", - bus->number, i, - (unsigned long long)res->start, - (unsigned long long)res->end, - (unsigned int)res->flags, - pr, (pr && pr->name) ? pr->name : "nil"); - - if (pr && !(pr->flags & IORESOURCE_UNSET)) { - if (request_resource(pr, res) == 0) - continue; - /* - * Must be a conflict with an existing entry. - * Move that entry (or entries) under the - * bridge resource and try again. - */ - if (reparent_resources(pr, res) == 0) - continue; - } - printk(KERN_WARNING - "PCI: Cannot allocate resource region " - "%d of PCI bridge %d, will remap\n", - i, bus->number); -clear_resource: - res->flags = 0; + DBG("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx " + "[0x%x], parent %p (%s)\n", + bus->self ? pci_name(bus->self) : "PHB", + bus->number, i, + (unsigned long long)res->start, + (unsigned long long)res->end, + (unsigned int)res->flags, + pr, (pr && pr->name) ? pr->name : "nil"); + + if (pr && !(pr->flags & IORESOURCE_UNSET)) { + if (request_resource(pr, res) == 0) + continue; + /* + * Must be a conflict with an existing entry. + * Move that entry (or entries) under the + * bridge resource and try again. + */ + if (reparent_resources(pr, res) == 0) + continue; } - pcibios_allocate_bus_resources(&bus->children); + printk(KERN_WARNING "PCI: Cannot allocate resource region " + "%d of PCI bridge %d, will remap\n", i, bus->number); +clear_resource: + res->flags = 0; } + + list_for_each_entry(b, &bus->children, node) + pcibios_allocate_bus_resources(b); } static inline void __devinit alloc_resource(struct pci_dev *dev, int idx) @@ -1372,10 +1369,13 @@ static void __init pcibios_allocate_resources(int pass) void __init pcibios_resource_survey(void) { + struct pci_bus *b; + /* Allocate and assign resources. If we re-assign everything, then * we skip the allocate phase */ - pcibios_allocate_bus_resources(&pci_root_buses); + list_for_each_entry(b, &pci_root_buses, node) + pcibios_allocate_bus_resources(b); if (!(ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)) { pcibios_allocate_resources(0); diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 21a6d55418f1..31481dc485de 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -189,6 +189,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) { struct pci_controller *phb; int primary; + struct pci_bus *b; primary = list_empty(&hose_list); phb = pcibios_alloc_controller(dn); @@ -203,6 +204,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) eeh_add_device_tree_early(dn); scan_phb(phb); + pcibios_allocate_bus_resources(phb->bus); pcibios_fixup_new_pci_devices(phb->bus); pci_bus_add_devices(phb->bus); eeh_add_device_tree_late(phb->bus); -- cgit v1.2.3 From b30115ea8f685bcd1769553fe8511745f985053c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 27 Oct 2008 19:48:47 +0000 Subject: powerpc/pci: Fix unmapping of IO space on 64-bit A typo/thinko made us pass the wrong argument to __flush_hash_table_range when unplugging bridges, thus not flushing all the translations for the IO space on unplug. The third parameter to __flush_hash_table_range is `end', not `size'. This causes the hypervisor to refuse unplugging slots. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 8247cff1cb3e..3502b9101e6b 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -426,7 +426,7 @@ int pcibios_unmap_io_space(struct pci_bus *bus) pci_name(bus->self)); __flush_hash_table_range(&init_mm, res->start + _IO_BASE, - res->end - res->start + 1); + res->end + _IO_BASE + 1); return 0; } -- cgit v1.2.3 From f9226d572d2f8b5f564596db8c6a13e458c46191 Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Mon, 27 Oct 2008 20:38:08 +0000 Subject: powerpc: Update remaining dma_mapping_ops to use map/unmap_page After the merge of the 32 and 64bit DMA code, dma_direct_ops lost their map/unmap_single() functions but gained map/unmap_page(). This caused a problem for Cell because Cell's dma_iommu_fixed_ops called the dma_direct_ops if the fixed linear mapping was to be used or the iommu ops if the dynamic window was to be used. So in order to fix this problem we need to update the 64bit DMA code to use map/unmap_page. First, we update the generic IOMMU code so that iommu_map_single() becomes iommu_map_page() and iommu_unmap_single() becomes iommu_unmap_page(). Then we propagate these changes up through all the callers of these two functions and in the process update all the dma_mapping_ops so that they have map/unmap_page rahter than map/unmap_single. We can do this because on 64bit there is no HIGHMEM memory so map/unmap_page ends up performing exactly the same function as map/unmap_single, just taking different arguments. This has no affect on drivers because the dma_map_single_attrs() just ends up calling the map_page() function of the appropriate dma_mapping_ops and similarly the dma_unmap_single_attrs() calls unmap_page(). This fixes an oops on Cell blades, which oops on boot without this because they call dma_direct_ops.map_single, which is NULL. Signed-off-by: Mark Nelson Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/iommu.h | 15 ++++++------- arch/powerpc/kernel/dma-iommu.c | 34 ++++++++++++++---------------- arch/powerpc/kernel/ibmebus.c | 27 ++++++++++++------------ arch/powerpc/kernel/iommu.c | 22 +++++++++++--------- arch/powerpc/kernel/vio.c | 25 +++++++++++----------- arch/powerpc/platforms/cell/iommu.c | 37 ++++++++++++++++----------------- arch/powerpc/platforms/iseries/iommu.c | 7 ++++--- arch/powerpc/platforms/ps3/system-bus.c | 36 +++++++++++++++++--------------- 8 files changed, 104 insertions(+), 99 deletions(-) diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h index 51ecfef8d843..7464c0daddd1 100644 --- a/arch/powerpc/include/asm/iommu.h +++ b/arch/powerpc/include/asm/iommu.h @@ -92,13 +92,14 @@ extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, unsigned long mask, gfp_t flag, int node); extern void iommu_free_coherent(struct iommu_table *tbl, size_t size, void *vaddr, dma_addr_t dma_handle); -extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl, - void *vaddr, size_t size, unsigned long mask, - enum dma_data_direction direction, - struct dma_attrs *attrs); -extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction, - struct dma_attrs *attrs); +extern dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl, + struct page *page, unsigned long offset, + size_t size, unsigned long mask, + enum dma_data_direction direction, + struct dma_attrs *attrs); +extern void iommu_unmap_page(struct iommu_table *tbl, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs); extern void iommu_init_early_pSeries(void); extern void iommu_init_early_iSeries(void); diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 49248f89ce23..14183af1b3fb 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -30,28 +30,26 @@ static void dma_iommu_free_coherent(struct device *dev, size_t size, } /* Creates TCEs for a user provided buffer. The user buffer must be - * contiguous real kernel storage (not vmalloc). The address of the buffer - * passed here is the kernel (virtual) address of the buffer. The buffer - * need not be page aligned, the dma_addr_t returned will point to the same - * byte within the page as vaddr. + * contiguous real kernel storage (not vmalloc). The address passed here + * comprises a page address and offset into that page. The dma_addr_t + * returned will point to the same byte within the page as was passed in. */ -static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) +static dma_addr_t dma_iommu_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { - return iommu_map_single(dev, dev->archdata.dma_data, vaddr, size, - device_to_mask(dev), direction, attrs); + return iommu_map_page(dev, dev->archdata.dma_data, page, offset, size, + device_to_mask(dev), direction, attrs); } -static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) +static void dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs) { - iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction, - attrs); + iommu_unmap_page(dev->archdata.dma_data, dma_handle, size, direction, + attrs); } @@ -94,10 +92,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) struct dma_mapping_ops dma_iommu_ops = { .alloc_coherent = dma_iommu_alloc_coherent, .free_coherent = dma_iommu_free_coherent, - .map_single = dma_iommu_map_single, - .unmap_single = dma_iommu_unmap_single, .map_sg = dma_iommu_map_sg, .unmap_sg = dma_iommu_unmap_sg, .dma_supported = dma_iommu_dma_supported, + .map_page = dma_iommu_map_page, + .unmap_page = dma_iommu_unmap_page, }; EXPORT_SYMBOL(dma_iommu_ops); diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index a06362223f8d..64299d28f364 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -79,20 +79,21 @@ static void ibmebus_free_coherent(struct device *dev, kfree(vaddr); } -static dma_addr_t ibmebus_map_single(struct device *dev, - void *ptr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) +static dma_addr_t ibmebus_map_page(struct device *dev, + struct page *page, + unsigned long offset, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { - return (dma_addr_t)(ptr); + return (dma_addr_t)(page_address(page) + offset); } -static void ibmebus_unmap_single(struct device *dev, - dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) +static void ibmebus_unmap_page(struct device *dev, + dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { return; } @@ -129,11 +130,11 @@ static int ibmebus_dma_supported(struct device *dev, u64 mask) static struct dma_mapping_ops ibmebus_dma_ops = { .alloc_coherent = ibmebus_alloc_coherent, .free_coherent = ibmebus_free_coherent, - .map_single = ibmebus_map_single, - .unmap_single = ibmebus_unmap_single, .map_sg = ibmebus_map_sg, .unmap_sg = ibmebus_unmap_sg, .dma_supported = ibmebus_dma_supported, + .map_page = ibmebus_map_page, + .unmap_page = ibmebus_unmap_page, }; static int ibmebus_match_path(struct device *dev, void *data) diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 45f47c97fd14..1bfa706b96e7 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -565,21 +565,23 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name) } /* Creates TCEs for a user provided buffer. The user buffer must be - * contiguous real kernel storage (not vmalloc). The address of the buffer - * passed here is the kernel (virtual) address of the buffer. The buffer - * need not be page aligned, the dma_addr_t returned will point to the same - * byte within the page as vaddr. + * contiguous real kernel storage (not vmalloc). The address passed here + * comprises a page address and offset into that page. The dma_addr_t + * returned will point to the same byte within the page as was passed in. */ -dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl, - void *vaddr, size_t size, unsigned long mask, - enum dma_data_direction direction, struct dma_attrs *attrs) +dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl, + struct page *page, unsigned long offset, size_t size, + unsigned long mask, enum dma_data_direction direction, + struct dma_attrs *attrs) { dma_addr_t dma_handle = DMA_ERROR_CODE; + void *vaddr; unsigned long uaddr; unsigned int npages, align; BUG_ON(direction == DMA_NONE); + vaddr = page_address(page) + offset; uaddr = (unsigned long)vaddr; npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE); @@ -605,9 +607,9 @@ dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl, return dma_handle; } -void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction, - struct dma_attrs *attrs) +void iommu_unmap_page(struct iommu_table *tbl, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs) { unsigned int npages; diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 434c92a85c03..a11e6bc59b30 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -516,10 +516,10 @@ static void vio_dma_iommu_free_coherent(struct device *dev, size_t size, vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); } -static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) +static dma_addr_t vio_dma_iommu_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { struct vio_dev *viodev = to_vio_dev(dev); dma_addr_t ret = DMA_ERROR_CODE; @@ -529,7 +529,7 @@ static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr, return ret; } - ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs); + ret = dma_iommu_ops.map_page(dev, page, offset, size, direction, attrs); if (unlikely(dma_mapping_error(dev, ret))) { vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); atomic_inc(&viodev->cmo.allocs_failed); @@ -538,14 +538,14 @@ static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr, return ret; } -static void vio_dma_iommu_unmap_single(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) +static void vio_dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { struct vio_dev *viodev = to_vio_dev(dev); - dma_iommu_ops.unmap_single(dev, dma_handle, size, direction, attrs); + dma_iommu_ops.unmap_page(dev, dma_handle, size, direction, attrs); vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); } @@ -603,10 +603,11 @@ static void vio_dma_iommu_unmap_sg(struct device *dev, struct dma_mapping_ops vio_dma_mapping_ops = { .alloc_coherent = vio_dma_iommu_alloc_coherent, .free_coherent = vio_dma_iommu_free_coherent, - .map_single = vio_dma_iommu_map_single, - .unmap_single = vio_dma_iommu_unmap_single, .map_sg = vio_dma_iommu_map_sg, .unmap_sg = vio_dma_iommu_unmap_sg, + .map_page = vio_dma_iommu_map_page, + .unmap_page = vio_dma_iommu_unmap_page, + }; /** diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index ef92e7146215..3168272ab0d7 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -593,31 +593,30 @@ static void dma_fixed_free_coherent(struct device *dev, size_t size, dma_direct_ops.free_coherent(dev, size, vaddr, dma_handle); } -static dma_addr_t dma_fixed_map_single(struct device *dev, void *ptr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) +static dma_addr_t dma_fixed_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)) - return dma_direct_ops.map_single(dev, ptr, size, direction, - attrs); + return dma_direct_ops.map_page(dev, page, offset, size, + direction, attrs); else - return iommu_map_single(dev, cell_get_iommu_table(dev), ptr, - size, device_to_mask(dev), direction, - attrs); + return iommu_map_page(dev, cell_get_iommu_table(dev), page, + offset, size, device_to_mask(dev), + direction, attrs); } -static void dma_fixed_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) +static void dma_fixed_unmap_page(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs) { if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)) - dma_direct_ops.unmap_single(dev, dma_addr, size, direction, - attrs); + dma_direct_ops.unmap_page(dev, dma_addr, size, direction, + attrs); else - iommu_unmap_single(cell_get_iommu_table(dev), dma_addr, size, - direction, attrs); + iommu_unmap_page(cell_get_iommu_table(dev), dma_addr, size, + direction, attrs); } static int dma_fixed_map_sg(struct device *dev, struct scatterlist *sg, @@ -652,12 +651,12 @@ static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask); struct dma_mapping_ops dma_iommu_fixed_ops = { .alloc_coherent = dma_fixed_alloc_coherent, .free_coherent = dma_fixed_free_coherent, - .map_single = dma_fixed_map_single, - .unmap_single = dma_fixed_unmap_single, .map_sg = dma_fixed_map_sg, .unmap_sg = dma_fixed_unmap_sg, .dma_supported = dma_fixed_dma_supported, .set_dma_mask = dma_set_mask_and_switch, + .map_page = dma_fixed_map_page, + .unmap_page = dma_fixed_unmap_page, }; static void cell_dma_dev_setup_fixed(struct device *dev); diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index bb464d1211b2..bbe828f1b885 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -215,14 +215,15 @@ EXPORT_SYMBOL_GPL(iseries_hv_free); dma_addr_t iseries_hv_map(void *vaddr, size_t size, enum dma_data_direction direction) { - return iommu_map_single(NULL, &vio_iommu_table, vaddr, size, - DMA_32BIT_MASK, direction, NULL); + return iommu_map_page(NULL, &vio_iommu_table, virt_to_page(vaddr), + (unsigned long)vaddr % PAGE_SIZE, size, + DMA_32BIT_MASK, direction, NULL); } void iseries_hv_unmap(dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - iommu_unmap_single(&vio_iommu_table, dma_handle, size, direction, NULL); + iommu_unmap_page(&vio_iommu_table, dma_handle, size, direction, NULL); } void __init iommu_vio_init(void) diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index a789bf58ca8b..661e9f77ebf6 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -555,18 +555,19 @@ static void ps3_free_coherent(struct device *_dev, size_t size, void *vaddr, } /* Creates TCEs for a user provided buffer. The user buffer must be - * contiguous real kernel storage (not vmalloc). The address of the buffer - * passed here is the kernel (virtual) address of the buffer. The buffer - * need not be page aligned, the dma_addr_t returned will point to the same - * byte within the page as vaddr. + * contiguous real kernel storage (not vmalloc). The address passed here + * comprises a page address and offset into that page. The dma_addr_t + * returned will point to the same byte within the page as was passed in. */ -static dma_addr_t ps3_sb_map_single(struct device *_dev, void *ptr, size_t size, - enum dma_data_direction direction, struct dma_attrs *attrs) +static dma_addr_t ps3_sb_map_page(struct device *_dev, struct page *page, + unsigned long offset, size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs) { struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev); int result; unsigned long bus_addr; + void *ptr = page_address(page) + offset; result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size, &bus_addr, @@ -580,15 +581,16 @@ static dma_addr_t ps3_sb_map_single(struct device *_dev, void *ptr, size_t size, return bus_addr; } -static dma_addr_t ps3_ioc0_map_single(struct device *_dev, void *ptr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) +static dma_addr_t ps3_ioc0_map_page(struct device *_dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev); int result; unsigned long bus_addr; u64 iopte_flag; + void *ptr = page_address(page) + offset; iopte_flag = IOPTE_M; switch (direction) { @@ -615,7 +617,7 @@ static dma_addr_t ps3_ioc0_map_single(struct device *_dev, void *ptr, return bus_addr; } -static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr, +static void ps3_unmap_page(struct device *_dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction direction, struct dma_attrs *attrs) { struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev); @@ -689,21 +691,21 @@ static int ps3_dma_supported(struct device *_dev, u64 mask) static struct dma_mapping_ops ps3_sb_dma_ops = { .alloc_coherent = ps3_alloc_coherent, .free_coherent = ps3_free_coherent, - .map_single = ps3_sb_map_single, - .unmap_single = ps3_unmap_single, .map_sg = ps3_sb_map_sg, .unmap_sg = ps3_sb_unmap_sg, - .dma_supported = ps3_dma_supported + .dma_supported = ps3_dma_supported, + .map_page = ps3_sb_map_page, + .unmap_page = ps3_unmap_page, }; static struct dma_mapping_ops ps3_ioc0_dma_ops = { .alloc_coherent = ps3_alloc_coherent, .free_coherent = ps3_free_coherent, - .map_single = ps3_ioc0_map_single, - .unmap_single = ps3_unmap_single, .map_sg = ps3_ioc0_map_sg, .unmap_sg = ps3_ioc0_unmap_sg, - .dma_supported = ps3_dma_supported + .dma_supported = ps3_dma_supported, + .map_page = ps3_ioc0_map_page, + .unmap_page = ps3_unmap_page, }; /** -- cgit v1.2.3 From 3c10c9c45e290022ca7d2aa1ad33a0b6ed767520 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 28 Oct 2008 18:01:39 +0000 Subject: powerpc/mpic: Fix regression caused by change of default IRQ affinity The Freescale implementation of MPIC only allows a single CPU destination for non-IPI interrupts. We add a flag to the mpic_init to distinquish these variants of MPIC. We pull in the irq_choose_cpu from sparc64 to select a single CPU as the destination of the interrupt. This is to deal with the fact that the default smp affinity was changed by commit 18404756765c713a0be4eb1082920c04822ce588 ("genirq: Expose default irq affinity mask (take 3)") to be all CPUs. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/mpic.h | 2 ++ arch/powerpc/platforms/85xx/mpc85xx_ds.c | 3 +- arch/powerpc/platforms/86xx/pic.c | 3 +- arch/powerpc/sysdev/mpic.c | 59 +++++++++++++++++++++++++++++--- 4 files changed, 61 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index 34d9ac433ace..c2ccca53b991 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -355,6 +355,8 @@ struct mpic #define MPIC_NO_BIAS 0x00000400 /* Ignore NIRQS as reported by FRR */ #define MPIC_BROKEN_FRR_NIRQS 0x00000800 +/* Destination only supports a single CPU at a time */ +#define MPIC_SINGLE_DEST_CPU 0x00001000 /* MPIC HW modification ID */ #define MPIC_REGSET_MASK 0xf0000000 diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 483b65cbabae..613bf8c2e30d 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -78,7 +78,8 @@ void __init mpc85xx_ds_pic_init(void) mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); of_node_put(np); diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c index 8881c5de500d..668275d9e668 100644 --- a/arch/powerpc/platforms/86xx/pic.c +++ b/arch/powerpc/platforms/86xx/pic.c @@ -44,7 +44,8 @@ void __init mpc86xx_init_irq(void) mpic = mpic_alloc(np, res.start, MPIC_PRIMARY | MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_SINGLE_DEST_CPU, 0, 256, " MPIC "); of_node_put(np); BUG_ON(mpic == NULL); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 8e3478c995ef..f6299cca7814 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -563,6 +563,51 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) #endif /* CONFIG_MPIC_U3_HT_IRQS */ +#ifdef CONFIG_SMP +static int irq_choose_cpu(unsigned int virt_irq) +{ + cpumask_t mask = irq_desc[virt_irq].affinity; + int cpuid; + + if (cpus_equal(mask, CPU_MASK_ALL)) { + static int irq_rover; + static DEFINE_SPINLOCK(irq_rover_lock); + unsigned long flags; + + /* Round-robin distribution... */ + do_round_robin: + spin_lock_irqsave(&irq_rover_lock, flags); + + while (!cpu_online(irq_rover)) { + if (++irq_rover >= NR_CPUS) + irq_rover = 0; + } + cpuid = irq_rover; + do { + if (++irq_rover >= NR_CPUS) + irq_rover = 0; + } while (!cpu_online(irq_rover)); + + spin_unlock_irqrestore(&irq_rover_lock, flags); + } else { + cpumask_t tmp; + + cpus_and(tmp, cpu_online_map, mask); + + if (cpus_empty(tmp)) + goto do_round_robin; + + cpuid = first_cpu(tmp); + } + + return cpuid; +} +#else +static int irq_choose_cpu(unsigned int virt_irq) +{ + return hard_smp_processor_id(); +} +#endif #define mpic_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) @@ -777,12 +822,18 @@ void mpic_set_affinity(unsigned int irq, cpumask_t cpumask) struct mpic *mpic = mpic_from_irq(irq); unsigned int src = mpic_irq_to_hw(irq); - cpumask_t tmp; + if (mpic->flags & MPIC_SINGLE_DEST_CPU) { + int cpuid = irq_choose_cpu(irq); - cpus_and(tmp, cpumask, cpu_online_map); + mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid); + } else { + cpumask_t tmp; - mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), - mpic_physmask(cpus_addr(tmp)[0])); + cpus_and(tmp, cpumask, cpu_online_map); + + mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), + mpic_physmask(cpus_addr(tmp)[0])); + } } static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type) -- cgit v1.2.3 From 210434d7633d477aa503454d68511fa2904e418e Mon Sep 17 00:00:00 2001 From: Carl Love Date: Wed, 29 Oct 2008 05:06:45 +0000 Subject: powerpc/cell/OProfile: Fix on-stack array size in activate spu profiling function The size of the pm_signal_local array should be equal to the number of SPUs being configured in the array. Currently, the array is of size 4 (NR_PHYS_CTRS) but being indexed by a for loop from 0 to 7 (NUM_SPUS_PER_NODE). This could potentially cause an oops or random memory corruption since the pm_signal_local array is on the stack. This fixes it. Signed-off-by: Carl Love Signed-off-by: Paul Mackerras --- arch/powerpc/oprofile/op_model_cell.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 35141a8bc3d9..25a4ec2514a3 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -582,6 +582,13 @@ static int cell_reg_setup(struct op_counter_config *ctr, num_counters = num_ctrs; + if (unlikely(num_ctrs > NR_PHYS_CTRS)) { + printk(KERN_ERR + "%s: Oprofile, number of specified events " \ + "exceeds number of physical counters\n", + __func__); + return -EIO; + } pm_regs.group_control = 0; pm_regs.debug_bus_control = 0; @@ -830,13 +837,13 @@ static int calculate_lfsr(int n) static int pm_rtas_activate_spu_profiling(u32 node) { int ret, i; - struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; /* * Set up the rtas call to configure the debug bus to * route the SPU PCs. Setup the pm_signal for each SPU */ - for (i = 0; i < NUM_SPUS_PER_NODE; i++) { + for (i = 0; i < ARRAY_SIZE(pm_signal_local); i++) { pm_signal_local[i].cpu = node; pm_signal_local[i].signal_group = 41; /* spu i on word (i/2) */ @@ -848,7 +855,7 @@ static int pm_rtas_activate_spu_profiling(u32 node) ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, pm_signal_local, - (NUM_SPUS_PER_NODE + (ARRAY_SIZE(pm_signal_local) * sizeof(struct pm_signal))); if (unlikely(ret)) { -- cgit v1.2.3 From 5b97fbd093ac2e0da0c7eec894fee065a04af55d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 29 Oct 2008 22:35:08 -0700 Subject: ATA: remove excess kernel-doc notation Remove excess kernel-doc function parameter notation from drivers/ata/: Warning(drivers/ata/libata-core.c:1622): Excess function parameter or struct member 'fn' description in 'ata_pio_queue_task' Warning(drivers/ata/libata-core.c:4655): Excess function parameter or struct member 'err_mask' description in 'ata_qc_complete' Warning(drivers/ata/ata_piix.c:751): Excess function parameter or struct member 'udma' description in 'do_pata_set_dmamode' Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 1 - drivers/ata/libata-core.c | 2 -- 2 files changed, 3 deletions(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 52dc2d8b8f22..8e37be19bbf5 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -738,7 +738,6 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) * do_pata_set_dmamode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring * @adev: Drive in question - * @udma: udma mode, 0 - 6 * @isich: set if the chip is an ICH device * * Set UDMA mode for device, in host controller PCI config space. diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2ff633c119e2..e398df12fd18 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1602,7 +1602,6 @@ unsigned long ata_id_xfermask(const u16 *id) /** * ata_pio_queue_task - Queue port_task * @ap: The ata_port to queue port_task for - * @fn: workqueue function to be scheduled * @data: data for @fn to use * @delay: delay time in msecs for workqueue function * @@ -4648,7 +4647,6 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc) /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete - * @err_mask: ATA Status register contents * * Indicate to the mid and upper layers that an ATA * command has completed, with either an ok or not-ok status. -- cgit v1.2.3 From ba14a9c291aa867896a90b3571fcc1c3759942ff Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 28 Oct 2008 16:52:20 -0700 Subject: libata: Avoid overflow in ata_tf_to_lba48() when tf->hba_lbal > 127 In ata_tf_to_lba48(), when evaluating (tf->hob_lbal & 0xff) << 24 the expression is promoted to signed int (since int can hold all values of u8). However, if hob_lbal is 128 or more, then it is treated as a negative signed value and sign-extended when promoted to u64 to | into sectors, which leads to the MSB 32 bits of section getting set incorrectly. For example, Phillip O'Donnell reported that a 1.5GB drive caused: ata3.00: HPA detected: current 2930277168, native 18446744072344861488 where 2930277168 == 0xAEA87B30 and 18446744072344861488 == 0xffffffffaea87b30 which shows the problem when hob_lbal is 0xae. Fix this by adding a cast to u64, just as is used by for hob_lbah and hob_lbam in the function. Reported-by: Phillip O'Donnell Signed-off-by: Roland Dreier Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e398df12fd18..8824c8da3f2f 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1268,7 +1268,7 @@ u64 ata_tf_to_lba48(const struct ata_taskfile *tf) sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40; sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32; - sectors |= (tf->hob_lbal & 0xff) << 24; + sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24; sectors |= (tf->lbah & 0xff) << 16; sectors |= (tf->lbam & 0xff) << 8; sectors |= (tf->lbal & 0xff); -- cgit v1.2.3 From b9d5b89b487517cbd4cb4702da829e07ef9e4432 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 22 Oct 2008 00:46:36 +0900 Subject: sata_via: fix support for 5287 5287 used to be treated as vt6420 but it didn't work. It's new family of controllers called vt8251 which hosts four SATA ports as M/S of the two ATA ports. This configuration is rather peculiar in that although the M/S devices are on the same port, each have its own SCR (or equivalent link status/control) registers which screws up the port-link-device hierarchy assumed by libata. Another controller which falls into this category is ata_piix w/ SIDPR access. libata now has facility to deal with this class of controllers named slave_link. A low level driver for such controllers can just call ata_slave_link_init() on the respective ports and libata will handle all the difficult parts like following up with single SRST after hardresetting both ports. This patch creates new controller class vt8251, implements slave_link aware init sequence and config space based SCR access for it and moves 5287 to the new class. This patch is based on Joseph Chan's larger patch which was created before slave_link was implemented in libata. http://thread.gmane.org/gmane.linux.kernel.commits.mm/40640 Signed-off-by: Tejun Heo Cc: Joseph Chan Signed-off-by: Jeff Garzik --- drivers/ata/sata_via.c | 155 +++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 143 insertions(+), 12 deletions(-) diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 5b72e734300a..62367fe4d5dc 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -44,11 +44,16 @@ #include #define DRV_NAME "sata_via" -#define DRV_VERSION "2.3" +#define DRV_VERSION "2.4" +/* + * vt8251 is different from other sata controllers of VIA. It has two + * channels, each channel has both Master and Slave slot. + */ enum board_ids_enum { vt6420, vt6421, + vt8251, }; enum { @@ -70,6 +75,8 @@ enum { static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val); +static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val); static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); static void svia_noop_freeze(struct ata_port *ap); static int vt6420_prereset(struct ata_link *link, unsigned long deadline); @@ -79,12 +86,12 @@ static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); static const struct pci_device_id svia_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x5337), vt6420 }, - { PCI_VDEVICE(VIA, 0x0591), vt6420 }, - { PCI_VDEVICE(VIA, 0x3149), vt6420 }, - { PCI_VDEVICE(VIA, 0x3249), vt6421 }, - { PCI_VDEVICE(VIA, 0x5287), vt6420 }, + { PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */ + { PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */ + { PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */ { PCI_VDEVICE(VIA, 0x5372), vt6420 }, { PCI_VDEVICE(VIA, 0x7372), vt6420 }, + { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ { } /* terminate list */ }; @@ -128,6 +135,13 @@ static struct ata_port_operations vt6421_sata_ops = { .scr_write = svia_scr_write, }; +static struct ata_port_operations vt8251_ops = { + .inherits = &svia_base_ops, + .hardreset = sata_std_hardreset, + .scr_read = vt8251_scr_read, + .scr_write = vt8251_scr_write, +}; + static const struct ata_port_info vt6420_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, @@ -152,6 +166,15 @@ static struct ata_port_info vt6421_pport_info = { .port_ops = &vt6421_pata_ops, }; +static struct ata_port_info vt8251_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS | + ATA_FLAG_NO_LEGACY, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, + .port_ops = &vt8251_ops, +}; + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); MODULE_LICENSE("GPL"); @@ -174,6 +197,83 @@ static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } +static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val) +{ + static const u8 ipm_tbl[] = { 1, 2, 6, 0 }; + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + u8 raw; + + switch (scr) { + case SCR_STATUS: + pci_read_config_byte(pdev, 0xA0 + slot, &raw); + + /* read the DET field, bit0 and 1 of the config byte */ + v |= raw & 0x03; + + /* read the SPD field, bit4 of the configure byte */ + if (raw & (1 << 4)) + v |= 0x02 << 4; + else + v |= 0x01 << 4; + + /* read the IPM field, bit2 and 3 of the config byte */ + v |= ipm_tbl[(raw >> 2) & 0x3]; + break; + + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x5287); + pci_read_config_dword(pdev, 0xB0 + slot * 4, &v); + break; + + case SCR_CONTROL: + pci_read_config_byte(pdev, 0xA4 + slot, &raw); + + /* read the DET field, bit0 and bit1 */ + v |= ((raw & 0x02) << 1) | (raw & 0x01); + + /* read the IPM field, bit2 and bit3 */ + v |= ((raw >> 2) & 0x03) << 8; + break; + + default: + return -EINVAL; + } + + *val = v; + return 0; +} + +static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + + switch (scr) { + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x5287); + pci_write_config_dword(pdev, 0xB0 + slot * 4, val); + return 0; + + case SCR_CONTROL: + /* set the DET field */ + v |= ((val & 0x4) >> 1) | (val & 0x1); + + /* set the IPM field */ + v |= ((val >> 8) & 0x3) << 2; + + pci_write_config_byte(pdev, 0xA4 + slot, v); + return 0; + + default: + return -EINVAL; + } +} + /** * svia_tf_load - send taskfile registers to host controller * @ap: Port to which output is sent @@ -396,6 +496,30 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) return 0; } +static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL }; + struct ata_host *host; + int i, rc; + + rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + *r_host = host; + + rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n"); + return rc; + } + + /* 8251 hosts four sata ports as M/S of the two channels */ + for (i = 0; i < host->n_ports; i++) + ata_slave_link_init(host->ports[i]); + + return 0; +} + static void svia_configure(struct pci_dev *pdev) { u8 tmp8; @@ -451,10 +575,10 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - if (board_id == vt6420) - bar_sizes = &svia_bar_sizes[0]; - else + if (board_id == vt6421) bar_sizes = &vt6421_bar_sizes[0]; + else + bar_sizes = &svia_bar_sizes[0]; for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) if ((pci_resource_start(pdev, i) == 0) || @@ -467,12 +591,19 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; } - if (board_id == vt6420) + switch (board_id) { + case vt6420: rc = vt6420_prepare_host(pdev, &host); - else + break; + case vt6421: rc = vt6421_prepare_host(pdev, &host); - if (rc) - return rc; + break; + case vt8251: + rc = vt8251_prepare_host(pdev, &host); + break; + default: + return -EINVAL; + } svia_configure(pdev); -- cgit v1.2.3 From 9ce8e3073d9cfd6f859c22a25441db41b85cbf6e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 27 Aug 2008 15:23:18 +0200 Subject: libata: add whitelist for devices with known good pata-sata bridges libata currently imposes a UDMA5 max transfer rate and 200 sector max transfer size for SATA devices that sit behind a pata-sata bridge. Lots of devices have known good bridges that don't need this limit applied. The MTRON SSD disks are such devices. Transfer rates are increased by 20-30% with the restriction removed. So add a "blacklist" entry for the MTRON devices, with a flag indicating that the bridge is known good. Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 7 +++++++ include/linux/libata.h | 1 + 2 files changed, 8 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8824c8da3f2f..82af7011f2dd 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2158,6 +2158,10 @@ retry: static inline u8 ata_dev_knobble(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; + + if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK) + return 0; + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); } @@ -4062,6 +4066,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, }, { "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, }, + /* Devices that do not need bridging limits applied */ + { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + /* End Marker */ { } }; diff --git a/include/linux/libata.h b/include/linux/libata.h index 507f53ef8038..f5441edee55f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -372,6 +372,7 @@ enum { ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */ ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */ ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */ + ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3 From 770a424112cb2c3a3e39221299eaf5244b76479a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 30 Oct 2008 22:58:06 -0700 Subject: sparc64: Add missing null terminating entry to bq4802_match[]. Signed-off-by: David S. Miller --- arch/sparc64/kernel/time.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index dfd1b33e770a..141da3759091 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -490,6 +490,7 @@ static struct of_device_id __initdata bq4802_match[] = { .name = "rtc", .compatible = "bq4802", }, + {}, }; static struct of_platform_driver bq4802_driver = { -- cgit v1.2.3 From 263e69cbc9e5a9e7bcf6a24f641ef0717d1ae4df Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 30 Oct 2008 23:11:44 -0700 Subject: pppoe: Fix socket leak. Move SKB trim before we lookup the socket so we don't have to put it on failure. Based upon an initial patch by Jarek Poplawski and suggestions from Herbert Xu. Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index fc6f4b8c64b3..b646e92134dc 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -399,11 +399,11 @@ static int pppoe_rcv(struct sk_buff *skb, if (skb->len < len) goto drop; - po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex); - if (!po) + if (pskb_trim_rcsum(skb, len)) goto drop; - if (pskb_trim_rcsum(skb, len)) + po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex); + if (!po) goto drop; return sk_receive_skb(sk_pppox(po), skb, 0); -- cgit v1.2.3 From ad1d967c88e349c7e822ad75dd3247a2a50d2ea3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 30 Oct 2008 23:54:35 -0700 Subject: net: delete excess kernel-doc notation Remove excess kernel-doc function parameters from networking header & driver files: Warning(include/net/sock.h:946): Excess function parameter or struct member 'sk' description in 'sk_filter_release' Warning(include/linux/netdevice.h:1545): Excess function parameter or struct member 'cpu' description in 'netif_tx_lock' Warning(drivers/net/wan/z85230.c:712): Excess function parameter or struct member 'regs' description in 'z8530_interrupt' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/wan/z85230.c | 1 - include/linux/netdevice.h | 1 - include/net/sock.h | 1 - 3 files changed, 3 deletions(-) diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index ccd9cd35ecbe..5bf7e01ef0e9 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -695,7 +695,6 @@ EXPORT_SYMBOL(z8530_nop); * z8530_interrupt - Handle an interrupt from a Z8530 * @irq: Interrupt number * @dev_id: The Z8530 device that is interrupting. - * @regs: unused * * A Z85[2]30 device has stuck its hand in the air for attention. * We scan both the channels on the chip for events and then call diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c8bcb59adfdf..9d77b1d7dca8 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1537,7 +1537,6 @@ static inline void __netif_tx_unlock_bh(struct netdev_queue *txq) /** * netif_tx_lock - grab network device transmit lock * @dev: network device - * @cpu: cpu number of lock owner * * Get network device transmit lock */ diff --git a/include/net/sock.h b/include/net/sock.h index ada50c04d09f..c04f9e18ea22 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -936,7 +936,6 @@ extern void sock_init_data(struct socket *sock, struct sock *sk); /** * sk_filter_release: Release a socket filter - * @sk: socket * @fp: filter to remove * * Remove a filter from a socket and release its resources. -- cgit v1.2.3 From 485ac57bc1238719b1508f91b0f9eeda4a3c84bb Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 30 Oct 2008 23:55:16 -0700 Subject: netns: add register_pernet_gen_subsys/unregister_pernet_gen_subsys netns ops which are registered with register_pernet_gen_device() are shutdown strictly before those which are registered with register_pernet_subsys(). Sometimes this leads to opposite (read: buggy) shutdown ordering between two modules. Add register_pernet_gen_subsys()/unregister_pernet_gen_subsys() for modules which aren't elite enough for entry in struct net, and which can't use register_pernet_gen_device(). PPTP conntracking module is such one. Signed-off-by: Alexey Dobriyan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/net/net_namespace.h | 2 ++ net/core/net_namespace.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+) diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 708009be88b6..700c53a3c6fa 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -214,6 +214,8 @@ struct pernet_operations { extern int register_pernet_subsys(struct pernet_operations *); extern void unregister_pernet_subsys(struct pernet_operations *); +extern int register_pernet_gen_subsys(int *id, struct pernet_operations *); +extern void unregister_pernet_gen_subsys(int id, struct pernet_operations *); extern int register_pernet_device(struct pernet_operations *); extern void unregister_pernet_device(struct pernet_operations *); extern int register_pernet_gen_device(int *id, struct pernet_operations *); diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index f1d07b5c1e17..1895a4ca9c4f 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -325,6 +325,38 @@ void unregister_pernet_subsys(struct pernet_operations *module) } EXPORT_SYMBOL_GPL(unregister_pernet_subsys); +int register_pernet_gen_subsys(int *id, struct pernet_operations *ops) +{ + int rv; + + mutex_lock(&net_mutex); +again: + rv = ida_get_new_above(&net_generic_ids, 1, id); + if (rv < 0) { + if (rv == -EAGAIN) { + ida_pre_get(&net_generic_ids, GFP_KERNEL); + goto again; + } + goto out; + } + rv = register_pernet_operations(first_device, ops); + if (rv < 0) + ida_remove(&net_generic_ids, *id); + mutex_unlock(&net_mutex); +out: + return rv; +} +EXPORT_SYMBOL_GPL(register_pernet_gen_subsys); + +void unregister_pernet_gen_subsys(int id, struct pernet_operations *ops) +{ + mutex_lock(&net_mutex); + unregister_pernet_operations(ops); + ida_remove(&net_generic_ids, id); + mutex_unlock(&net_mutex); +} +EXPORT_SYMBOL_GPL(unregister_pernet_gen_subsys); + /** * register_pernet_device - register a network namespace device * @ops: pernet operations structure for the subsystem -- cgit v1.2.3 From 61e5744849cb936bf4361181b8f9ebccebf4d9db Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 30 Oct 2008 23:55:44 -0700 Subject: netfilter: nf_conntrack_proto_gre: switch to register_pernet_gen_subsys() register_pernet_gen_device() can't be used is nf_conntrack_pptp module is also used (compiled in or loaded). Right now, proto_gre_net_exit() is called before nf_conntrack_pptp_net_exit(). The former shutdowns and frees GRE piece of netns, however the latter absolutely needs it to flush keymap. Oops is inevitable. Switch to shiny new register_pernet_gen_subsys() to get correct ordering in netns ops list. Signed-off-by: Alexey Dobriyan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_proto_gre.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c index a2cdbcbf64c4..4ab62ad85dd4 100644 --- a/net/netfilter/nf_conntrack_proto_gre.c +++ b/net/netfilter/nf_conntrack_proto_gre.c @@ -335,7 +335,7 @@ static int __init nf_ct_proto_gre_init(void) rv = nf_conntrack_l4proto_register(&nf_conntrack_l4proto_gre4); if (rv < 0) return rv; - rv = register_pernet_gen_device(&proto_gre_net_id, &proto_gre_net_ops); + rv = register_pernet_gen_subsys(&proto_gre_net_id, &proto_gre_net_ops); if (rv < 0) nf_conntrack_l4proto_unregister(&nf_conntrack_l4proto_gre4); return rv; @@ -344,7 +344,7 @@ static int __init nf_ct_proto_gre_init(void) static void nf_ct_proto_gre_fini(void) { nf_conntrack_l4proto_unregister(&nf_conntrack_l4proto_gre4); - unregister_pernet_gen_device(proto_gre_net_id, &proto_gre_net_ops); + unregister_pernet_gen_subsys(proto_gre_net_id, &proto_gre_net_ops); } module_init(nf_ct_proto_gre_init); -- cgit v1.2.3 From ddb72b02414228844ad46f7cbd42eccea01fb485 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 31 Oct 2008 15:58:53 +0900 Subject: sh: SHmedia ISA tuning fixups. SH-5 doesn't support any elaborate ISA inheritance schemes (-dsp, -up, etc.), so only bother with that if we are building an sh32 kernel. Signed-off-by: Paul Mundt --- arch/sh/Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 3a74ed62ec89..c43eb0d7fa3b 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -18,7 +18,11 @@ isa-$(CONFIG_CPU_SH4) := sh4 isa-$(CONFIG_CPU_SH4A) := sh4a isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al isa-$(CONFIG_CPU_SH5) := shmedia + +ifeq ($(CONFIG_SUPERH32),y) isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp +isa-y := $(isa-y)-up +endif cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,) cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \ -- cgit v1.2.3 From 3a8af722495469e9c550386b910c5b93c91cf107 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 31 Oct 2008 00:00:33 -0700 Subject: net: Really remove all of LOOPBACK_TSO code. As noticed by Saikiran Madugula, commit 7447ef63cf2dfdc444f4c72ae13f604350b2e25f ("loopback: Remove rest of LOOPBACK_TSO code.") got rid of emulate_large_send_offload() but didn't get rid of the call site as well. Signed-off-by: David S. Miller --- drivers/net/loopback.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index 3b43bfd85a0f..b1ac63ab8c16 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -76,15 +76,6 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev) skb->protocol = eth_type_trans(skb,dev); -#ifdef LOOPBACK_TSO - if (skb_is_gso(skb)) { - BUG_ON(skb->protocol != htons(ETH_P_IP)); - BUG_ON(ip_hdr(skb)->protocol != IPPROTO_TCP); - - emulate_large_send_offload(skb); - return 0; - } -#endif dev->last_rx = jiffies; /* it's OK to use per_cpu_ptr() because BHs are off */ -- cgit v1.2.3 From 140626673289a25f677fb006fafb3f6a95b8eb97 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Fri, 31 Oct 2008 16:01:22 +0900 Subject: sh: use the new byteorder headers. Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Paul Mundt --- arch/sh/include/asm/byteorder.h | 36 +++++++++++++++++------------------- 1 file changed, 17 insertions(+), 19 deletions(-) diff --git a/arch/sh/include/asm/byteorder.h b/arch/sh/include/asm/byteorder.h index 4c13e6117563..f5fa0653ebc6 100644 --- a/arch/sh/include/asm/byteorder.h +++ b/arch/sh/include/asm/byteorder.h @@ -8,7 +8,15 @@ #include #include -static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) +#ifdef __LITTLE_ENDIAN__ +# define __LITTLE_ENDIAN +#else +# define __BIG_ENDIAN +#endif + +#define __SWAB_64_THRU_32__ + +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { __asm__( #ifdef __SH5__ @@ -24,8 +32,9 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) return x; } +#define __arch_swab32 __arch_swab32 -static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) +static inline __attribute_const__ __u16 __arch_swab16(__u16 x) { __asm__( #ifdef __SH5__ @@ -39,32 +48,21 @@ static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) return x; } +#define __arch_swab16 __arch_swab16 -static inline __u64 ___arch__swab64(__u64 val) +static inline __u64 __arch_swab64(__u64 val) { union { struct { __u32 a,b; } s; __u64 u; } v, w; v.u = val; - w.s.b = ___arch__swab32(v.s.a); - w.s.a = ___arch__swab32(v.s.b); + w.s.b = __arch_swab32(v.s.a); + w.s.a = __arch_swab32(v.s.b); return w.u; } +#define __arch_swab64 __arch_swab64 -#define __arch__swab64(x) ___arch__swab64(x) -#define __arch__swab32(x) ___arch__swab32(x) -#define __arch__swab16(x) ___arch__swab16(x) - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#ifdef __LITTLE_ENDIAN__ -#include -#else -#include -#endif +#include #endif /* __ASM_SH_BYTEORDER_H */ -- cgit v1.2.3 From aeffd54ad7e3af513c6a0dadda71e6316e5ba230 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 29 Oct 2008 13:34:50 +0900 Subject: sh: Change register name SCSPTR to SCSPTR2 This change a name of SCSPTR used in sci_rxd_in of SH5-101. SCSPTR is not declared and will become the error. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 257b2235d126..96cae15db9ca 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -599,7 +599,7 @@ static inline int sci_rxd_in(struct uart_port *port) #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) static inline int sci_rxd_in(struct uart_port *port) { - return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */ + return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ } #elif defined(__H8300H__) || defined(__H8300S__) static inline int sci_rxd_in(struct uart_port *port) -- cgit v1.2.3 From 47c2968c84cb737f8dd8b79e34b75242ec7e0796 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 30 Oct 2008 14:49:03 +0900 Subject: Add support usb setting on sh 7366 This patch add usb setting for sh 7366 Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 6851dba02f31..e17db39b97aa 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -36,6 +36,32 @@ static struct platform_device iic_device = { .resource = iic_resources, }; +static struct resource usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = 0xa4d80000, + .end = 0xa4d800ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "r8a66597_hcd", + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(usb_host_resources), + .resource = usb_host_resources, +}; + static struct uio_info vpu_platform_data = { .name = "VPU5", .version = "0", @@ -142,6 +168,7 @@ static struct platform_device sci_device = { static struct platform_device *sh7366_devices[] __initdata = { &iic_device, &sci_device, + &usb_host_device, &vpu_device, &veu0_device, &veu1_device, @@ -158,6 +185,7 @@ static int __init sh7366_devices_setup(void) clk_always_enable("mstp022"); /* INTC */ clk_always_enable("mstp020"); /* SuperHyway */ clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp211"); /* USB */ clk_always_enable("mstp207"); /* VEU-2 */ clk_always_enable("mstp202"); /* VEU-1 */ clk_always_enable("mstp201"); /* VPU */ -- cgit v1.2.3 From 961e9ff9025ef2dfdebe843549b7e1ec4d48c17c Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 29 Oct 2008 13:33:45 +0900 Subject: sh: Add sci_rxd_in of SH4-202 SH4-202 doesn't have SCSXX1. But it is treated so that there is SCSPTR1 in current code. This patch add sci_rxd_in of SH4-202. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 96cae15db9ca..f4bd93e02ee2 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -526,8 +526,7 @@ static inline int sci_rxd_in(struct uart_port *port) defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH4_202) + defined(CONFIG_CPU_SUBTYPE_SH7091) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) @@ -536,6 +535,13 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } +#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffe80000) + return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return 1; +} #elif defined(CONFIG_CPU_SUBTYPE_SH7760) static inline int sci_rxd_in(struct uart_port *port) { -- cgit v1.2.3 From a432226614c5616e3cfd211e0acffa0acfb4770c Mon Sep 17 00:00:00 2001 From: "fernando@oss.ntt.co" Date: Thu, 23 Oct 2008 04:27:19 +0000 Subject: xfrm: do not leak ESRCH to user space I noticed that, under certain conditions, ESRCH can be leaked from the xfrm layer to user space through sys_connect. In particular, this seems to happen reliably when the kernel fails to resolve a template either because the AF_KEY receive buffer being used by racoon is full or because the SA entry we are trying to use is in XFRM_STATE_EXPIRED state. However, since this could be a transient issue it could be argued that EAGAIN would be more appropriate. Besides this error code is not even documented in the man page for sys_connect (as of man-pages 3.07). Signed-off-by: Fernando Luis Vazquez Cao Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 832b47c1de80..25872747762c 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1251,6 +1251,8 @@ xfrm_tmpl_resolve_one(struct xfrm_policy *policy, struct flowi *fl, -EINVAL : -EAGAIN); xfrm_state_put(x); } + else if (error == -ESRCH) + error = -EAGAIN; if (!tmpl->optional) goto fail; -- cgit v1.2.3 From 7abc404a5a1e3785749acb8dbfcc558223f78444 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Wed, 29 Oct 2008 07:16:02 +0000 Subject: Define SCSPTR1 for SH 7751R After the recent commit to kill off SCI/SCIF special casing SH 7751R fails to compile with CONFIG_SH_RTS7751R2D set. This is because SCSPTR1 is undefined. Take the value for SCSPTR1 from the SH7751R Group Hardware Manual. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index f4bd93e02ee2..c17e541a07c4 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -34,6 +34,7 @@ # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ #define SCIF_ORER 0x0200 /* overrun error bit */ #elif defined(CONFIG_SH_RTS7751R2D) +# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -- cgit v1.2.3 From a8884e3415c29c58a5875d54c109c4a7fcaa6fb4 Mon Sep 17 00:00:00 2001 From: Michael Trimarchi Date: Fri, 31 Oct 2008 16:10:23 +0900 Subject: sh: Fix up the shared IRQ demuxer's control bit testing logic. Correct the interrupt handler in sh4 serial device, return the correct value and check for what is anabled in the SCSCR register. The sh7722 is broken just sending a break using minicom. Signed-off-by: Michael Trimarchi Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 23 ++++++++++++----------- drivers/serial/sh-sci.h | 1 + 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 47816e68c903..5c0f32c7fbf6 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -797,26 +797,27 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { - unsigned short ssr_status, scr_status; - struct uart_port *port = ptr; + unsigned short ssr_status, scr_status; + struct uart_port *port = ptr; + irqreturn_t ret = IRQ_NONE; ssr_status = sci_in(port,SCxSR); scr_status = sci_in(port,SCSCR); /* Tx Interrupt */ - if ((ssr_status & 0x0020) && (scr_status & 0x0080)) - sci_tx_interrupt(irq, ptr); + if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE)) + ret = sci_tx_interrupt(irq, ptr); /* Rx Interrupt */ - if ((ssr_status & 0x0002) && (scr_status & 0x0040)) - sci_rx_interrupt(irq, ptr); + if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE)) + ret = sci_rx_interrupt(irq, ptr); /* Error Interrupt */ - if ((ssr_status & 0x0080) && (scr_status & 0x0400)) - sci_er_interrupt(irq, ptr); + if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE)) + ret = sci_er_interrupt(irq, ptr); /* Break Interrupt */ - if ((ssr_status & 0x0010) && (scr_status & 0x0200)) - sci_br_interrupt(irq, ptr); + if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE)) + ret = sci_br_interrupt(irq, ptr); - return IRQ_HANDLED; + return ret; } #if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index c17e541a07c4..6163a45f968f 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -166,6 +166,7 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7091) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7722) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ -- cgit v1.2.3 From 694f94f263bee30ada18bab178b98a0d10917e68 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 31 Oct 2008 16:20:36 +0900 Subject: sh: FTRACE renamed to FUNCTION_TRACER. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 2 +- arch/sh/boot/compressed/Makefile_32 | 2 +- arch/sh/kernel/entry-common.S | 4 ++-- arch/sh/kernel/sh_ksyms_32.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index cb2c87df70ce..80119b3398e7 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -24,7 +24,7 @@ config SUPERH32 select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_ARCH_TRACEHOOK - select HAVE_FTRACE + select HAVE_FUNCTION_TRACER config SUPERH64 def_bool y if CPU_SH5 diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32 index 301e6d503256..b96a055b053e 100644 --- a/arch/sh/boot/compressed/Makefile_32 +++ b/arch/sh/boot/compressed/Makefile_32 @@ -23,7 +23,7 @@ IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) -ifeq ($(CONFIG_FTRACE),y) +ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 1a5cf9dd82de..5b7efc4016fa 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -372,7 +372,7 @@ syscall_exit: 7: .long do_syscall_trace_enter 8: .long do_syscall_trace_leave -#ifdef CONFIG_FTRACE +#ifdef CONFIG_FUNCTION_TRACER .align 2 .globl _mcount .type _mcount,@function @@ -414,4 +414,4 @@ skip_trace: ftrace_stub: rts nop -#endif /* CONFIG_FTRACE */ +#endif /* CONFIG_FUNCTION_TRACER */ diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index d998f4c795be..92ae5e6c099e 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -134,7 +134,7 @@ EXPORT_SYMBOL(flush_dcache_page); EXPORT_SYMBOL(clear_user_page); #endif -#ifdef CONFIG_FTRACE +#ifdef CONFIG_FUNCTION_TRACER EXPORT_SYMBOL(mcount); #endif EXPORT_SYMBOL(csum_partial); -- cgit v1.2.3 From 464f763d5aeac1c31f6c626afbc4ea086c78a7b4 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 31 Oct 2008 16:01:19 +0900 Subject: sh: Enable NFS root in Migo-R defconfig. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/configs/migor_defconfig | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index 624c47aa66d3..30cac42f25e7 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Tue Oct 21 12:57:28 2008 +# Linux kernel version: 2.6.28-rc2 +# Fri Oct 31 15:58:06 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -73,7 +73,6 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -285,7 +284,7 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on" +CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp" # # Bus options @@ -718,6 +717,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set @@ -969,7 +969,23 @@ CONFIG_TMPFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types @@ -1019,7 +1035,12 @@ CONFIG_CRYPTO=y # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set -# CONFIG_CRYPTO_MANAGER is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1096,7 +1117,7 @@ CONFIG_CRYPTO=y # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_HW is not set # # Library routines -- cgit v1.2.3 From 216813a8bb4db97eb7a6e75c533894430053df48 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 7 Aug 2008 13:54:59 +0900 Subject: sh: fix sh2a cache entry_mask fix sh2a cache entry_mask in __flush_{purge,invalidate}_region. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/mm/cache-sh2a.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c index 62c0c5f35120..24d86a794065 100644 --- a/arch/sh/mm/cache-sh2a.c +++ b/arch/sh/mm/cache-sh2a.c @@ -59,7 +59,7 @@ void __flush_purge_region(void *start, int size) for (v = begin; v < end; v+=L1_CACHE_BYTES) { ctrl_outl((v & CACHE_PHYSADDR_MASK), - CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008); } back_to_cached(); local_irq_restore(flags); @@ -82,14 +82,14 @@ void __flush_invalidate_region(void *start, int size) /* I-cache invalidate */ for (v = begin; v < end; v+=L1_CACHE_BYTES) { ctrl_outl((v & CACHE_PHYSADDR_MASK), - CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008); } #else for (v = begin; v < end; v+=L1_CACHE_BYTES) { ctrl_outl((v & CACHE_PHYSADDR_MASK), - CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008); ctrl_outl((v & CACHE_PHYSADDR_MASK), - CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008); } #endif back_to_cached(); -- cgit v1.2.3 From 65325d5c45a4363b4ad2ce2a55793a131b667de6 Mon Sep 17 00:00:00 2001 From: Mike Dyer Date: Wed, 29 Oct 2008 10:10:06 +0000 Subject: powerpc: Remove duplicate DMA entry from mpc8313erdb device tree Commit 574366128db29e7da609ec1f9c01bf9d80adec87 added a duplicate DMA controller node. Signed-off-by: Mike Dyer Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8313erdb.dts | 39 ----------------------------------- 1 file changed, 39 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 747f27676332..503031766825 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -164,45 +164,6 @@ mode = "cpu"; }; - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8313-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a8>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; - reg = <0x180 0x28>; - cell-index = <3>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; -- cgit v1.2.3 From cbafe312ef4a263e9aa36786bc67e1e6d959872b Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Fri, 31 Oct 2008 00:40:19 -0700 Subject: bpa10x: free sk_buff with kfree_skb MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Inspired by Sergio Luis' similar patches, I finally found a case which is trivial enough that spatch won't choke on it. Signed-off-by: Ilpo Järvinen Acked-by: Marcel Holtmann Signed-off-by: David S. Miller --- drivers/bluetooth/bpa10x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index 32f3a8ed8d3d..b936d8ce2728 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -443,8 +443,8 @@ static void bpa10x_destruct(struct hci_dev *hdev) BT_DBG("%s", hdev->name); - kfree(data->rx_skb[0]); - kfree(data->rx_skb[1]); + kfree_skb(data->rx_skb[0]); + kfree_skb(data->rx_skb[1]); kfree(data); } -- cgit v1.2.3 From a1f64819fe9f136c98d572794a35a7e377c951ef Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 30 Oct 2008 01:41:56 +0100 Subject: firewire: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers Signed-off-by: Stefan Richter --- drivers/firewire/fw-device.c | 14 ++++++-------- drivers/firewire/fw-ohci.c | 2 +- drivers/firewire/fw-sbp2.c | 2 +- 3 files changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 3fccdd484100..6b9be42c7b98 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -587,8 +587,7 @@ static void create_units(struct fw_device *device) unit->device.bus = &fw_bus_type; unit->device.type = &fw_unit_type; unit->device.parent = &device->device; - snprintf(unit->device.bus_id, sizeof(unit->device.bus_id), - "%s.%d", device->device.bus_id, i++); + dev_set_name(&unit->device, "%s.%d", dev_name(&device->device), i++); init_fw_attribute_group(&unit->device, fw_unit_attributes, @@ -711,8 +710,7 @@ static void fw_device_init(struct work_struct *work) device->device.type = &fw_device_type; device->device.parent = device->card->device; device->device.devt = MKDEV(fw_cdev_major, minor); - snprintf(device->device.bus_id, sizeof(device->device.bus_id), - "fw%d", minor); + dev_set_name(&device->device, "fw%d", minor); init_fw_attribute_group(&device->device, fw_device_attributes, @@ -741,13 +739,13 @@ static void fw_device_init(struct work_struct *work) if (device->config_rom_retries) fw_notify("created device %s: GUID %08x%08x, S%d00, " "%d config ROM retries\n", - device->device.bus_id, + dev_name(&device->device), device->config_rom[3], device->config_rom[4], 1 << device->max_speed, device->config_rom_retries); else fw_notify("created device %s: GUID %08x%08x, S%d00\n", - device->device.bus_id, + dev_name(&device->device), device->config_rom[3], device->config_rom[4], 1 << device->max_speed); device->config_rom_retries = 0; @@ -883,12 +881,12 @@ static void fw_device_refresh(struct work_struct *work) FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) goto gone; - fw_notify("refreshed device %s\n", device->device.bus_id); + fw_notify("refreshed device %s\n", dev_name(&device->device)); device->config_rom_retries = 0; goto out; give_up: - fw_notify("giving up on refresh of device %s\n", device->device.bus_id); + fw_notify("giving up on refresh of device %s\n", dev_name(&device->device)); gone: atomic_set(&device->state, FW_DEVICE_SHUTDOWN); fw_device_shutdown(work); diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 8e16bfbdcb3d..46610b090415 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -2468,7 +2468,7 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) goto fail_self_id; fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n", - dev->dev.bus_id, version >> 16, version & 0xff); + dev_name(&dev->dev), version >> 16, version & 0xff); return 0; fail_self_id: diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index d334cac5e1fc..97df6dac3a82 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -1135,7 +1135,7 @@ static int sbp2_probe(struct device *dev) tgt->unit = unit; kref_init(&tgt->kref); INIT_LIST_HEAD(&tgt->lu_list); - tgt->bus_id = unit->device.bus_id; + tgt->bus_id = dev_name(&unit->device); tgt->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4]; if (fw_device_enable_phys_dma(device) < 0) -- cgit v1.2.3 From 233976e539a93de1320fc7625b24076b1f9e2c9c Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 30 Oct 2008 01:49:20 +0100 Subject: ieee1394: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers Signed-off-by: Stefan Richter --- drivers/ieee1394/hosts.c | 4 ++-- drivers/ieee1394/nodemgr.c | 14 +++++--------- 2 files changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/ieee1394/hosts.c b/drivers/ieee1394/hosts.c index 8dd09d850419..237d0c9d69c6 100644 --- a/drivers/ieee1394/hosts.c +++ b/drivers/ieee1394/hosts.c @@ -155,11 +155,11 @@ struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra, memcpy(&h->device, &nodemgr_dev_template_host, sizeof(h->device)); h->device.parent = dev; set_dev_node(&h->device, dev_to_node(dev)); - snprintf(h->device.bus_id, BUS_ID_SIZE, "fw-host%d", h->id); + dev_set_name(&h->device, "fw-host%d", h->id); h->host_dev.parent = &h->device; h->host_dev.class = &hpsb_host_class; - snprintf(h->host_dev.bus_id, BUS_ID_SIZE, "fw-host%d", h->id); + dev_set_name(&h->host_dev, "fw-host%d", h->id); if (device_register(&h->device)) goto fail; diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 2376b729e876..9e39f73282ee 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -826,13 +826,11 @@ static struct node_entry *nodemgr_create_node(octlet_t guid, memcpy(&ne->device, &nodemgr_dev_template_ne, sizeof(ne->device)); ne->device.parent = &host->device; - snprintf(ne->device.bus_id, BUS_ID_SIZE, "%016Lx", - (unsigned long long)(ne->guid)); + dev_set_name(&ne->device, "%016Lx", (unsigned long long)(ne->guid)); ne->node_dev.parent = &ne->device; ne->node_dev.class = &nodemgr_ne_class; - snprintf(ne->node_dev.bus_id, BUS_ID_SIZE, "%016Lx", - (unsigned long long)(ne->guid)); + dev_set_name(&ne->node_dev, "%016Lx", (unsigned long long)(ne->guid)); if (device_register(&ne->device)) goto fail_devreg; @@ -932,13 +930,11 @@ static void nodemgr_register_device(struct node_entry *ne, ud->device.parent = parent; - snprintf(ud->device.bus_id, BUS_ID_SIZE, "%s-%u", - ne->device.bus_id, ud->id); + dev_set_name(&ud->device, "%s-%u", dev_name(&ne->device), ud->id); ud->unit_dev.parent = &ud->device; ud->unit_dev.class = &nodemgr_ud_class; - snprintf(ud->unit_dev.bus_id, BUS_ID_SIZE, "%s-%u", - ne->device.bus_id, ud->id); + dev_set_name(&ud->unit_dev, "%s-%u", dev_name(&ne->device), ud->id); if (device_register(&ud->device)) goto fail_devreg; @@ -953,7 +949,7 @@ static void nodemgr_register_device(struct node_entry *ne, fail_classdevreg: device_unregister(&ud->device); fail_devreg: - HPSB_ERR("Failed to create unit %s", ud->device.bus_id); + HPSB_ERR("Failed to create unit %s", dev_name(&ud->device)); } -- cgit v1.2.3 From 638570b54346f140bc09b986d93e76025d35180f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 26 Oct 2008 12:03:37 +0100 Subject: ieee1394: raw1394: fix possible deadlock in multithreaded clients Regression in 2.6.28-rc1: When I added the new state_mutex which prevents corruption of raw1394's internal state when accessed by multithreaded client applications, the following possible though highly unlikely deadlock slipped in: Thread A: Thread B: - acquire mmap_sem - raw1394_write() or raw1394_ioctl() - raw1394_mmap() - acquire state_mutex - acquire state_mutex - copy_to/from_user(), possible page fault: acquire mmap_sem The simplest fix is to use mutex_trylock() instead of mutex_lock() in raw1394_mmap(). This changes the behavior under contention in a way which is visible to userspace clients. However, since multithreaded access was entirely buggy before state_mutex was added and libraw1394's documentation advised application programmers to use a handle only in a single thread, this change in behaviour should not be an issue in practice at all. Since we have to use mutex_trylock() in raw1394_mmap() regardless whether /dev/raw1394 was opened with O_NONBLOCK or not, we now use mutex_trylock() unconditionally everywhere for state_mutex, just to have consistent behavior. Reported-by: Johannes Weiner Signed-off-by: Stefan Richter --- drivers/ieee1394/raw1394.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c index 2cf4ae75beca..4bdfff0a9191 100644 --- a/drivers/ieee1394/raw1394.c +++ b/drivers/ieee1394/raw1394.c @@ -2268,7 +2268,8 @@ static ssize_t raw1394_write(struct file *file, const char __user * buffer, return -EFAULT; } - mutex_lock(&fi->state_mutex); + if (!mutex_trylock(&fi->state_mutex)) + return -EAGAIN; switch (fi->state) { case opened: @@ -2548,7 +2549,8 @@ static int raw1394_mmap(struct file *file, struct vm_area_struct *vma) struct file_info *fi = file->private_data; int ret; - mutex_lock(&fi->state_mutex); + if (!mutex_trylock(&fi->state_mutex)) + return -EAGAIN; if (fi->iso_state == RAW1394_ISO_INACTIVE) ret = -EINVAL; @@ -2669,7 +2671,8 @@ static long raw1394_ioctl(struct file *file, unsigned int cmd, break; } - mutex_lock(&fi->state_mutex); + if (!mutex_trylock(&fi->state_mutex)) + return -EAGAIN; switch (fi->iso_state) { case RAW1394_ISO_INACTIVE: -- cgit v1.2.3 From 8449fc3ae58bf8ee5acbd2280754cde67b5db128 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 26 Oct 2008 12:02:03 +0100 Subject: ieee1394: dv1394: fix possible deadlock in multithreaded clients Fix a possible though highly unlikely deadlock: Thread A: Thread B: - acquire mmap_sem - dv1394_ioctl/read/write() - dv1394_mmap() - acquire video->mtx - acquire video->mtx - copy_to/from_user(), possible page fault: acquire mmap_sem The simplest fix is to use mutex_trylock() instead of mutex_lock() in dv1394_mmap(). This changes the behavior under contention in a way which is visible to userspace clients. However, my guess is that no clients exist which use mmap vs. ioctl/read/write on the dv1394 character device file interface in concurrent threads. Reported-by: Johannes Weiner Signed-off-by: Stefan Richter --- drivers/ieee1394/dv1394.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index df70f51279d8..53329972c7db 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -1270,8 +1270,14 @@ static int dv1394_mmap(struct file *file, struct vm_area_struct *vma) struct video_card *video = file_to_video_card(file); int retval = -EINVAL; - /* serialize mmap */ - mutex_lock(&video->mtx); + /* + * We cannot use the blocking variant mutex_lock here because .mmap + * is called with mmap_sem held, while .ioctl, .read, .write acquire + * video->mtx and subsequently call copy_to/from_user which will + * grab mmap_sem in case of a page fault. + */ + if (!mutex_trylock(&video->mtx)) + return -EAGAIN; if ( ! video_card_initialized(video) ) { retval = do_dv1394_init_default(video); -- cgit v1.2.3 From fd9409343521eac22b6ed51686128a643c7c976b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 30 Oct 2008 19:37:09 -0700 Subject: x86: add iomap_atomic*()/iounmap_atomic() on 32-bit using fixmaps Impact: introduce new APIs, separate kmap code from CONFIG_HIGHMEM This takes the code used for CONFIG_HIGHMEM memory mappings except that it's designed for dynamic IO resource mapping. These fixmaps are available even with CONFIG_HIGHMEM turned off. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Ingo Molnar --- arch/x86/include/asm/fixmap.h | 4 +++ arch/x86/include/asm/fixmap_32.h | 4 --- arch/x86/include/asm/highmem.h | 5 +--- arch/x86/mm/Makefile | 2 +- arch/x86/mm/init_32.c | 3 +- arch/x86/mm/iomap_32.c | 59 ++++++++++++++++++++++++++++++++++++++++ include/asm-x86/iomap.h | 30 ++++++++++++++++++++ 7 files changed, 96 insertions(+), 11 deletions(-) create mode 100644 arch/x86/mm/iomap_32.c create mode 100644 include/asm-x86/iomap.h diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 8668a94f850e..23696d44a0af 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -9,6 +9,10 @@ extern int fixmaps_set; +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + void __native_set_fixmap(enum fixed_addresses idx, pte_t pte); void native_set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags); diff --git a/arch/x86/include/asm/fixmap_32.h b/arch/x86/include/asm/fixmap_32.h index 09f29ab5c139..c7115c1d7217 100644 --- a/arch/x86/include/asm/fixmap_32.h +++ b/arch/x86/include/asm/fixmap_32.h @@ -28,10 +28,8 @@ extern unsigned long __FIXADDR_TOP; #include #include #include -#ifdef CONFIG_HIGHMEM #include #include -#endif /* * Here we define all the compile-time 'special' virtual @@ -75,10 +73,8 @@ enum fixed_addresses { #ifdef CONFIG_X86_CYCLONE_TIMER FIX_CYCLONE_TIMER, /*cyclone timer register*/ #endif -#ifdef CONFIG_HIGHMEM FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, -#endif #ifdef CONFIG_PCI_MMCONFIG FIX_PCIE_MCFG, #endif diff --git a/arch/x86/include/asm/highmem.h b/arch/x86/include/asm/highmem.h index a3b3b7c3027b..bf9276bea660 100644 --- a/arch/x86/include/asm/highmem.h +++ b/arch/x86/include/asm/highmem.h @@ -25,14 +25,11 @@ #include #include #include +#include /* declarations for highmem.c */ extern unsigned long highstart_pfn, highend_pfn; -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; -extern pte_t *pkmap_page_table; - /* * Right now we initialize only a single pte table. It can be extended * easily, subsequent pte tables have to be allocated in one physical diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index 59f89b434b45..fea4565ff576 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -1,7 +1,7 @@ obj-y := init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \ pat.o pgtable.o gup.o -obj-$(CONFIG_X86_32) += pgtable_32.o +obj-$(CONFIG_X86_32) += pgtable_32.o iomap_32.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_X86_PTDUMP) += dump_pagetables.o diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 8396868e82c5..c483f4242079 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -334,7 +334,6 @@ int devmem_is_allowed(unsigned long pagenr) return 0; } -#ifdef CONFIG_HIGHMEM pte_t *kmap_pte; pgprot_t kmap_prot; @@ -357,6 +356,7 @@ static void __init kmap_init(void) kmap_prot = PAGE_KERNEL; } +#ifdef CONFIG_HIGHMEM static void __init permanent_kmaps_init(pgd_t *pgd_base) { unsigned long vaddr; @@ -436,7 +436,6 @@ static void __init set_highmem_pages_init(void) #endif /* !CONFIG_NUMA */ #else -# define kmap_init() do { } while (0) # define permanent_kmaps_init(pgd_base) do { } while (0) # define set_highmem_pages_init() do { } while (0) #endif /* CONFIG_HIGHMEM */ diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c new file mode 100644 index 000000000000..d0151d8ce452 --- /dev/null +++ b/arch/x86/mm/iomap_32.c @@ -0,0 +1,59 @@ +/* + * Copyright © 2008 Ingo Molnar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#include +#include + +/* Map 'pfn' using fixed map 'type' and protections 'prot' + */ +void * +iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot) +{ + enum fixed_addresses idx; + unsigned long vaddr; + + pagefault_disable(); + + idx = type + KM_TYPE_NR*smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + set_pte(kmap_pte-idx, pfn_pte(pfn, prot)); + arch_flush_lazy_mmu_mode(); + + return (void*) vaddr; +} +EXPORT_SYMBOL_GPL(iomap_atomic_prot_pfn); + +void +iounmap_atomic(void *kvaddr, enum km_type type) +{ + unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; + enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); + + /* + * Force other mappings to Oops if they'll try to access this pte + * without first remap it. Keeping stale mappings around is a bad idea + * also, in case the page changes cacheability attributes or becomes + * a protected page in a hypervisor. + */ + if (vaddr == __fix_to_virt(FIX_KMAP_BEGIN+idx)) + kpte_clear_flush(kmap_pte-idx, vaddr); + + arch_flush_lazy_mmu_mode(); + pagefault_enable(); +} +EXPORT_SYMBOL_GPL(iounmap_atomic); diff --git a/include/asm-x86/iomap.h b/include/asm-x86/iomap.h new file mode 100644 index 000000000000..c1f06289b14b --- /dev/null +++ b/include/asm-x86/iomap.h @@ -0,0 +1,30 @@ +/* + * Copyright © 2008 Ingo Molnar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#include +#include +#include +#include +#include +#include + +void * +iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot); + +void +iounmap_atomic(void *kvaddr, enum km_type type); -- cgit v1.2.3 From 9663f2e6a6cf3f82b06d8fb699b11b80f92553ba Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 30 Oct 2008 19:38:18 -0700 Subject: resources: add io-mapping functions to dynamically map large device apertures Impact: add new generic io_map_*() APIs Graphics devices have large PCI apertures which would consume a significant fraction of a 32-bit address space if mapped during driver initialization. Using ioremap at runtime is impractical as it is too slow. This new set of interfaces uses atomic mappings on 32-bit processors and a large static mapping on 64-bit processors to provide reasonable 32-bit performance and optimal 64-bit performance. The current implementation sits atop the io_map_atomic fixmap-based mechanism for 32-bit processors. This includes some editorial suggestions from Randy Dunlap for Documentation/io-mapping.txt Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Ingo Molnar --- Documentation/io-mapping.txt | 76 ++++++++++++++++++++++++++++ include/linux/io-mapping.h | 118 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 194 insertions(+) create mode 100644 Documentation/io-mapping.txt create mode 100644 include/linux/io-mapping.h diff --git a/Documentation/io-mapping.txt b/Documentation/io-mapping.txt new file mode 100644 index 000000000000..cd2f726becc8 --- /dev/null +++ b/Documentation/io-mapping.txt @@ -0,0 +1,76 @@ +The io_mapping functions in linux/io-mapping.h provide an abstraction for +efficiently mapping small regions of an I/O device to the CPU. The initial +usage is to support the large graphics aperture on 32-bit processors where +ioremap_wc cannot be used to statically map the entire aperture to the CPU +as it would consume too much of the kernel address space. + +A mapping object is created during driver initialization using + + struct io_mapping *io_mapping_create_wc(unsigned long base, + unsigned long size) + + 'base' is the bus address of the region to be made + mappable, while 'size' indicates how large a mapping region to + enable. Both are in bytes. + + This _wc variant provides a mapping which may only be used + with the io_mapping_map_atomic_wc or io_mapping_map_wc. + +With this mapping object, individual pages can be mapped either atomically +or not, depending on the necessary scheduling environment. Of course, atomic +maps are more efficient: + + void *io_mapping_map_atomic_wc(struct io_mapping *mapping, + unsigned long offset) + + 'offset' is the offset within the defined mapping region. + Accessing addresses beyond the region specified in the + creation function yields undefined results. Using an offset + which is not page aligned yields an undefined result. The + return value points to a single page in CPU address space. + + This _wc variant returns a write-combining map to the + page and may only be used with mappings created by + io_mapping_create_wc + + Note that the task may not sleep while holding this page + mapped. + + void io_mapping_unmap_atomic(void *vaddr) + + 'vaddr' must be the the value returned by the last + io_mapping_map_atomic_wc call. This unmaps the specified + page and allows the task to sleep once again. + +If you need to sleep while holding the lock, you can use the non-atomic +variant, although they may be significantly slower. + + void *io_mapping_map_wc(struct io_mapping *mapping, + unsigned long offset) + + This works like io_mapping_map_atomic_wc except it allows + the task to sleep while holding the page mapped. + + void io_mapping_unmap(void *vaddr) + + This works like io_mapping_unmap_atomic, except it is used + for pages mapped with io_mapping_map_wc. + +At driver close time, the io_mapping object must be freed: + + void io_mapping_free(struct io_mapping *mapping) + +Current Implementation: + +The initial implementation of these functions uses existing mapping +mechanisms and so provides only an abstraction layer and no new +functionality. + +On 64-bit processors, io_mapping_create_wc calls ioremap_wc for the whole +range, creating a permanent kernel-visible mapping to the resource. The +map_atomic and map functions add the requested offset to the base of the +virtual address returned by ioremap_wc. + +On 32-bit processors, io_mapping_map_atomic_wc uses io_map_atomic_prot_pfn, +which uses the fixmaps to get us a mapping to a page using an atomic fashion. +For io_mapping_map_wc, ioremap_wc() is used to get a mapping of the region. diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h new file mode 100644 index 000000000000..1b566993db6e --- /dev/null +++ b/include/linux/io-mapping.h @@ -0,0 +1,118 @@ +/* + * Copyright © 2008 Keith Packard + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef _LINUX_IO_MAPPING_H +#define _LINUX_IO_MAPPING_H + +#include +#include +#include +#include + +/* + * The io_mapping mechanism provides an abstraction for mapping + * individual pages from an io device to the CPU in an efficient fashion. + * + * See Documentation/io_mapping.txt + */ + +/* this struct isn't actually defined anywhere */ +struct io_mapping; + +#ifdef CONFIG_X86_64 + +/* Create the io_mapping object*/ +static inline struct io_mapping * +io_mapping_create_wc(unsigned long base, unsigned long size) +{ + return (struct io_mapping *) ioremap_wc(base, size); +} + +static inline void +io_mapping_free(struct io_mapping *mapping) +{ + iounmap(mapping); +} + +/* Atomic map/unmap */ +static inline void * +io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset) +{ + return ((char *) mapping) + offset; +} + +static inline void +io_mapping_unmap_atomic(void *vaddr) +{ +} + +/* Non-atomic map/unmap */ +static inline void * +io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) +{ + return ((char *) mapping) + offset; +} + +static inline void +io_mapping_unmap(void *vaddr) +{ +} + +#endif /* CONFIG_X86_64 */ + +#ifdef CONFIG_X86_32 +static inline struct io_mapping * +io_mapping_create_wc(unsigned long base, unsigned long size) +{ + return (struct io_mapping *) base; +} + +static inline void +io_mapping_free(struct io_mapping *mapping) +{ +} + +/* Atomic map/unmap */ +static inline void * +io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset) +{ + offset += (unsigned long) mapping; + return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0, + __pgprot(__PAGE_KERNEL_WC)); +} + +static inline void +io_mapping_unmap_atomic(void *vaddr) +{ + iounmap_atomic(vaddr, KM_USER0); +} + +static inline void * +io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) +{ + offset += (unsigned long) mapping; + return ioremap_wc(offset, PAGE_SIZE); +} + +static inline void +io_mapping_unmap(void *vaddr) +{ + iounmap(vaddr); +} +#endif /* CONFIG_X86_32 */ + +#endif /* _LINUX_IO_MAPPING_H */ -- cgit v1.2.3 From 0839ccb8ac6a9e2d5e175a4ae9c82b5c574d510d Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 30 Oct 2008 19:38:48 -0700 Subject: i915: use io-mapping interfaces instead of a variety of mapping kludges Impact: optimize/clean-up the IO mapping implementation of the i915 DRM driver Switch the i915 device aperture mapping to the io-mapping interface, taking advantage of the cleaner API to extend it across all of the mapping uses, including both pwrite and relocation updates. This dramatically improves performance on 64-bit kernels which were using the same slow path as 32-bit non-HIGHMEM kernels prior to this patch. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Ingo Molnar --- drivers/gpu/drm/i915/i915_drv.h | 3 + drivers/gpu/drm/i915/i915_gem.c | 174 ++++++++++++++++++---------------------- 2 files changed, 83 insertions(+), 94 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f20ffe17df71..126b2f13258c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -31,6 +31,7 @@ #define _I915_DRV_H_ #include "i915_reg.h" +#include /* General customization: */ @@ -246,6 +247,8 @@ typedef struct drm_i915_private { struct { struct drm_mm gtt_space; + struct io_mapping *gtt_mapping; + /** * List of objects currently involved in rendering from the * ringbuffer. diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 17ae330ff269..61183b95b108 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -171,35 +171,50 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, return 0; } -/* - * Try to write quickly with an atomic kmap. Return true on success. - * - * If this fails (which includes a partial write), we'll redo the whole - * thing with the slow version. - * - * This is a workaround for the low performance of iounmap (approximate - * 10% cpu cost on normal 3D workloads). kmap_atomic on HIGHMEM kernels - * happens to let us map card memory without taking IPIs. When the vmap - * rework lands we should be able to dump this hack. +/* This is the fast write path which cannot handle + * page faults in the source data */ -static inline int fast_user_write(unsigned long pfn, char __user *user_data, - int l, int o) + +static inline int +fast_user_write(struct io_mapping *mapping, + loff_t page_base, int page_offset, + char __user *user_data, + int length) { -#ifdef CONFIG_HIGHMEM - unsigned long unwritten; char *vaddr_atomic; + unsigned long unwritten; - vaddr_atomic = kmap_atomic_pfn(pfn, KM_USER0); -#if WATCH_PWRITE - DRM_INFO("pwrite i %d o %d l %d pfn %ld vaddr %p\n", - i, o, l, pfn, vaddr_atomic); -#endif - unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + o, user_data, l); - kunmap_atomic(vaddr_atomic, KM_USER0); - return !unwritten; -#else + vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base); + unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + page_offset, + user_data, length); + io_mapping_unmap_atomic(vaddr_atomic); + if (unwritten) + return -EFAULT; + return 0; +} + +/* Here's the write path which can sleep for + * page faults + */ + +static inline int +slow_user_write(struct io_mapping *mapping, + loff_t page_base, int page_offset, + char __user *user_data, + int length) +{ + char __iomem *vaddr; + unsigned long unwritten; + + vaddr = io_mapping_map_wc(mapping, page_base); + if (vaddr == NULL) + return -EFAULT; + unwritten = __copy_from_user(vaddr + page_offset, + user_data, length); + io_mapping_unmap(vaddr); + if (unwritten) + return -EFAULT; return 0; -#endif } static int @@ -208,10 +223,12 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, struct drm_file *file_priv) { struct drm_i915_gem_object *obj_priv = obj->driver_private; + drm_i915_private_t *dev_priv = dev->dev_private; ssize_t remain; - loff_t offset; + loff_t offset, page_base; char __user *user_data; - int ret = 0; + int page_offset, page_length; + int ret; user_data = (char __user *) (uintptr_t) args->data_ptr; remain = args->size; @@ -235,57 +252,37 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, obj_priv->dirty = 1; while (remain > 0) { - unsigned long pfn; - int i, o, l; - /* Operation in this page * - * i = page number - * o = offset within page - * l = bytes to copy + * page_base = page offset within aperture + * page_offset = offset within page + * page_length = bytes to copy for this page */ - i = offset >> PAGE_SHIFT; - o = offset & (PAGE_SIZE-1); - l = remain; - if ((o + l) > PAGE_SIZE) - l = PAGE_SIZE - o; - - pfn = (dev->agp->base >> PAGE_SHIFT) + i; - - if (!fast_user_write(pfn, user_data, l, o)) { - unsigned long unwritten; - char __iomem *vaddr; - - vaddr = ioremap_wc(pfn << PAGE_SHIFT, PAGE_SIZE); -#if WATCH_PWRITE - DRM_INFO("pwrite slow i %d o %d l %d " - "pfn %ld vaddr %p\n", - i, o, l, pfn, vaddr); -#endif - if (vaddr == NULL) { - ret = -EFAULT; - goto fail; - } - unwritten = __copy_from_user(vaddr + o, user_data, l); -#if WATCH_PWRITE - DRM_INFO("unwritten %ld\n", unwritten); -#endif - iounmap(vaddr); - if (unwritten) { - ret = -EFAULT; + page_base = (offset & ~(PAGE_SIZE-1)); + page_offset = offset & (PAGE_SIZE-1); + page_length = remain; + if ((page_offset + remain) > PAGE_SIZE) + page_length = PAGE_SIZE - page_offset; + + ret = fast_user_write (dev_priv->mm.gtt_mapping, page_base, + page_offset, user_data, page_length); + + /* If we get a fault while copying data, then (presumably) our + * source page isn't available. In this case, use the + * non-atomic function + */ + if (ret) { + ret = slow_user_write (dev_priv->mm.gtt_mapping, + page_base, page_offset, + user_data, page_length); + if (ret) goto fail; - } } - remain -= l; - user_data += l; - offset += l; + remain -= page_length; + user_data += page_length; + offset += page_length; } -#if WATCH_PWRITE && 1 - i915_gem_clflush_object(obj); - i915_gem_dump_object(obj, args->offset + args->size, __func__, ~0); - i915_gem_clflush_object(obj); -#endif fail: i915_gem_object_unpin(obj); @@ -1503,12 +1500,12 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, struct drm_i915_gem_exec_object *entry) { struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_relocation_entry reloc; struct drm_i915_gem_relocation_entry __user *relocs; struct drm_i915_gem_object *obj_priv = obj->driver_private; int i, ret; - uint32_t last_reloc_offset = -1; - void __iomem *reloc_page = NULL; + void __iomem *reloc_page; /* Choose the GTT offset for our buffer and put it there. */ ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment); @@ -1631,26 +1628,11 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, * perform. */ reloc_offset = obj_priv->gtt_offset + reloc.offset; - if (reloc_page == NULL || - (last_reloc_offset & ~(PAGE_SIZE - 1)) != - (reloc_offset & ~(PAGE_SIZE - 1))) { - if (reloc_page != NULL) - iounmap(reloc_page); - - reloc_page = ioremap_wc(dev->agp->base + - (reloc_offset & - ~(PAGE_SIZE - 1)), - PAGE_SIZE); - last_reloc_offset = reloc_offset; - if (reloc_page == NULL) { - drm_gem_object_unreference(target_obj); - i915_gem_object_unpin(obj); - return -ENOMEM; - } - } - + reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping, + (reloc_offset & + ~(PAGE_SIZE - 1))); reloc_entry = (uint32_t __iomem *)(reloc_page + - (reloc_offset & (PAGE_SIZE - 1))); + (reloc_offset & (PAGE_SIZE - 1))); reloc_val = target_obj_priv->gtt_offset + reloc.delta; #if WATCH_BUF @@ -1659,6 +1641,7 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, readl(reloc_entry), reloc_val); #endif writel(reloc_val, reloc_entry); + io_mapping_unmap_atomic(reloc_page); /* Write the updated presumed offset for this entry back out * to the user. @@ -1674,9 +1657,6 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, drm_gem_object_unreference(target_obj); } - if (reloc_page != NULL) - iounmap(reloc_page); - #if WATCH_BUF if (0) i915_gem_dump_object(obj, 128, __func__, ~0); @@ -2518,6 +2498,10 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data, if (ret != 0) return ret; + dev_priv->mm.gtt_mapping = io_mapping_create_wc(dev->agp->base, + dev->agp->agp_info.aper_size + * 1024 * 1024); + mutex_lock(&dev->struct_mutex); BUG_ON(!list_empty(&dev_priv->mm.active_list)); BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); @@ -2535,11 +2519,13 @@ int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { + drm_i915_private_t *dev_priv = dev->dev_private; int ret; ret = i915_gem_idle(dev); drm_irq_uninstall(dev); + io_mapping_free(dev_priv->mm.gtt_mapping); return ret; } -- cgit v1.2.3 From 2dccbf4ea05d2c3603b8c1359019bf7148a316a5 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 30 Oct 2008 16:37:05 +0000 Subject: powerpc: Fix bug in kernel copy of libfdt's fdt_subnode_offset_namelen() There's currently an off-by-one bug in fdt_subnode_offset_namelen() which causes it to keep searching after it's finished the subnodes of the given parent, and into the subnodes of siblings of the original node which come after it in the tree. This bug was introduced in commit ed95d7450dcbfeb45ffc9d39b1747aee82b49a51 ("powerpc: Update in-kernel dtc and libfdt to version 1.2.0"). A patch has already been submitted to dtc/libfdt mainline. We don't really want to pull in a new upstream version during the 2.6.28 cycle, but we should still fix this bug, hence this standalone version of the fix for the in-kernel libfdt. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/boot/libfdt/fdt_ro.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/boot/libfdt/fdt_ro.c b/arch/powerpc/boot/libfdt/fdt_ro.c index 129b532bcc1a..fbbba44fcd0d 100644 --- a/arch/powerpc/boot/libfdt/fdt_ro.c +++ b/arch/powerpc/boot/libfdt/fdt_ro.c @@ -104,8 +104,8 @@ int fdt_subnode_offset_namelen(const void *fdt, int offset, FDT_CHECK_HEADER(fdt); - for (depth = 0; - offset >= 0; + for (depth = 0, offset = fdt_next_node(fdt, offset, &depth); + (offset >= 0) && (depth > 0); offset = fdt_next_node(fdt, offset, &depth)) { if (depth < 0) return -FDT_ERR_NOTFOUND; @@ -114,7 +114,10 @@ int fdt_subnode_offset_namelen(const void *fdt, int offset, return offset; } - return offset; /* error */ + if (offset < 0) + return offset; /* error */ + else + return -FDT_ERR_NOTFOUND; } int fdt_subnode_offset(const void *fdt, int parentoffset, -- cgit v1.2.3 From 8ba4773aee23a5e2e1ce386c5bd86e407496de99 Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Thu, 30 Oct 2008 16:51:32 +0000 Subject: powerpc: Fix format string warning in arch/powerpc/boot/main.c Fix format string warning in arch/powerpc/boot/main.c. Also correct a typo ("uncomressed") on the same line. BOOTCC arch/powerpc/boot/main.o arch/powerpc/boot/main.c: In function 'prep_kernel': arch/powerpc/boot/main.c:65: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long unsigned int' Signed-off-by: Jon Smirl Acked-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/boot/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index ae32801ebd69..a28f02165e97 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -63,7 +63,7 @@ static struct addr_range prep_kernel(void) */ if ((unsigned long)_start < ei.loadsize) fatal("Insufficient memory for kernel at address 0!" - " (_start=%p, uncomressed size=%08x)\n\r", + " (_start=%p, uncompressed size=%08lx)\n\r", _start, ei.loadsize); if ((unsigned long)_end < ei.memsize) -- cgit v1.2.3 From ebdba9af940d63e469dc8e46b4aa1fc474e8ee2d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 31 Oct 2008 21:34:09 +1100 Subject: powerpc: Fix compile errors with CONFIG_BUG=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This makes sure we don't try to call find_bug or is_warning_bug when CONFIG_BUG=n and CONFIG_XMON=y. Otherwise we get these errors: arch/powerpc/xmon/xmon.c: In function ‘print_bug_trap’: arch/powerpc/xmon/xmon.c:1364: error: implicit declaration of function ‘find_bug’ arch/powerpc/xmon/xmon.c:1364: warning: assignment makes pointer from integer without a cast arch/powerpc/xmon/xmon.c:1367: error: implicit declaration of function ‘is_warning_bug’ arch/powerpc/xmon/xmon.c:1374: error: dereferencing pointer to incomplete type make[2]: *** [arch/powerpc/xmon/xmon.o] Error 1 make[1]: *** [arch/powerpc/xmon] Error 2 make: *** [sub-make] Error 2 Signed-off-by: Paul Mackerras --- arch/powerpc/xmon/xmon.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 34c3d0688fe0..076368c8b8a9 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -1353,6 +1353,7 @@ static void backtrace(struct pt_regs *excp) static void print_bug_trap(struct pt_regs *regs) { +#ifdef CONFIG_BUG const struct bug_entry *bug; unsigned long addr; @@ -1373,6 +1374,7 @@ static void print_bug_trap(struct pt_regs *regs) #else printf("kernel BUG at %p!\n", (void *)bug->bug_addr); #endif +#endif /* CONFIG_BUG */ } static void excprint(struct pt_regs *fp) -- cgit v1.2.3 From 5663a1232bd557b4b2141ad345dd56785fa51c2a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 31 Oct 2008 22:27:17 +1100 Subject: Revert "powerpc: Sync RPA note in zImage with kernel's RPA note" This reverts commit 91a00302959545a9ae423e99732b1e46eb19e877, plus commit 0dcd440120ef12879ff34fc78d7e4abf171c79e4 ("powerpc: Revert CHRP boot wrapper to real-base = 12MB on 32-bit") which depended on it. Commit 91a00302 was causing NVRAM corruption on some pSeries machines, for as-yet unknown reasons, so this reverts it until the cause is identified. Signed-off-by: Paul Mackerras --- arch/powerpc/boot/addnote.c | 175 ++++++++++---------------------------- arch/powerpc/boot/wrapper | 9 +- arch/powerpc/kernel/prom_init.c | 10 +-- arch/powerpc/kernel/vmlinux.lds.S | 3 - 4 files changed, 52 insertions(+), 145 deletions(-) diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c index 3091d1d21aef..b1e5611b2ab1 100644 --- a/arch/powerpc/boot/addnote.c +++ b/arch/powerpc/boot/addnote.c @@ -11,12 +11,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * Usage: addnote [-r realbase] zImage [note.elf] - * - * If note.elf is supplied, it is the name of an ELF file that contains - * an RPA note to use instead of the built-in one. Alternatively, the - * note.elf file may be empty, in which case the built-in RPA note is - * used (this is to simplify how this is invoked from the wrapper script). + * Usage: addnote zImage */ #include #include @@ -48,29 +43,27 @@ char rpaname[] = "IBM,RPA-Client-Config"; */ #define N_RPA_DESCR 8 unsigned int rpanote[N_RPA_DESCR] = { - 1, /* lparaffinity */ - 128, /* min_rmo_size */ + 0, /* lparaffinity */ + 64, /* min_rmo_size */ 0, /* min_rmo_percent */ - 46, /* max_pft_size */ + 40, /* max_pft_size */ 1, /* splpar */ -1, /* min_load */ - 1, /* new_mem_def */ - 0, /* ignore_my_client_config */ + 0, /* new_mem_def */ + 1, /* ignore_my_client_config */ }; #define ROUNDUP(len) (((len) + 3) & ~3) unsigned char buf[512]; -unsigned char notebuf[512]; -#define GET_16BE(b, off) (((b)[off] << 8) + ((b)[(off)+1])) -#define GET_32BE(b, off) ((GET_16BE((b), (off)) << 16) + \ - GET_16BE((b), (off)+2)) +#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1])) +#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2)) -#define PUT_16BE(b, off, v) ((b)[off] = ((v) >> 8) & 0xff, \ - (b)[(off) + 1] = (v) & 0xff) -#define PUT_32BE(b, off, v) (PUT_16BE((b), (off), (v) >> 16), \ - PUT_16BE((b), (off) + 2, (v))) +#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \ + buf[(off) + 1] = (v) & 0xff) +#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \ + PUT_16BE((off) + 2, (v))) /* Structure of an ELF file */ #define E_IDENT 0 /* ELF header */ @@ -95,95 +88,25 @@ unsigned char notebuf[512]; unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' }; -unsigned char *read_rpanote(const char *fname, int *nnp) -{ - int notefd, nr, i; - int ph, ps, np; - int note, notesize; - - notefd = open(fname, O_RDONLY); - if (notefd < 0) { - perror(fname); - exit(1); - } - nr = read(notefd, notebuf, sizeof(notebuf)); - if (nr < 0) { - perror("read note"); - exit(1); - } - if (nr == 0) /* empty file */ - return NULL; - if (nr < E_HSIZE || - memcmp(¬ebuf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0 || - notebuf[E_IDENT+EI_CLASS] != ELFCLASS32 || - notebuf[E_IDENT+EI_DATA] != ELFDATA2MSB) - goto notelf; - close(notefd); - - /* now look for the RPA-note */ - ph = GET_32BE(notebuf, E_PHOFF); - ps = GET_16BE(notebuf, E_PHENTSIZE); - np = GET_16BE(notebuf, E_PHNUM); - if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) - goto notelf; - - for (i = 0; i < np; ++i, ph += ps) { - if (GET_32BE(notebuf, ph + PH_TYPE) != PT_NOTE) - continue; - note = GET_32BE(notebuf, ph + PH_OFFSET); - notesize = GET_32BE(notebuf, ph + PH_FILESZ); - if (notesize < 34 || note + notesize > nr) - continue; - if (GET_32BE(notebuf, note) != strlen(rpaname) + 1 || - GET_32BE(notebuf, note + 8) != 0x12759999 || - strcmp((char *)¬ebuf[note + 12], rpaname) != 0) - continue; - /* looks like an RPA note, return it */ - *nnp = notesize; - return ¬ebuf[note]; - } - /* no RPA note found */ - return NULL; - - notelf: - fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", fname); - exit(1); -} - int main(int ac, char **av) { - int fd, n, i, ai; + int fd, n, i; int ph, ps, np; int nnote, nnote2, ns; - unsigned char *rpap; - char *p, *endp; - - ai = 1; - if (ac >= ai + 2 && strcmp(av[ai], "-r") == 0) { - /* process -r realbase */ - p = av[ai + 1]; - descr[1] = strtol(p, &endp, 16); - if (endp == p || *endp != 0) { - fprintf(stderr, "Can't parse -r argument '%s' as hex\n", - p); - exit(1); - } - ai += 2; - } - if (ac != ai + 1 && ac != ai + 2) { - fprintf(stderr, "Usage: %s [-r realbase] elf-file [rpanote.elf]\n", av[0]); + + if (ac != 2) { + fprintf(stderr, "Usage: %s elf-file\n", av[0]); exit(1); } - fd = open(av[ai], O_RDWR); + fd = open(av[1], O_RDWR); if (fd < 0) { - perror(av[ai]); + perror(av[1]); exit(1); } nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr); nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote); - rpap = NULL; n = read(fd, buf, sizeof(buf)); if (n < 0) { @@ -197,25 +120,22 @@ main(int ac, char **av) if (buf[E_IDENT+EI_CLASS] != ELFCLASS32 || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) { fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", - av[ai]); + av[1]); exit(1); } - if (ac == ai + 2) - rpap = read_rpanote(av[ai + 1], &nnote2); - - ph = GET_32BE(buf, E_PHOFF); - ps = GET_16BE(buf, E_PHENTSIZE); - np = GET_16BE(buf, E_PHNUM); + ph = GET_32BE(E_PHOFF); + ps = GET_16BE(E_PHENTSIZE); + np = GET_16BE(E_PHNUM); if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) goto notelf; if (ph + (np + 2) * ps + nnote + nnote2 > n) goto nospace; for (i = 0; i < np; ++i) { - if (GET_32BE(buf, ph + PH_TYPE) == PT_NOTE) { + if (GET_32BE(ph + PH_TYPE) == PT_NOTE) { fprintf(stderr, "%s already has a note entry\n", - av[ai]); + av[1]); exit(0); } ph += ps; @@ -228,42 +148,37 @@ main(int ac, char **av) /* fill in the program header entry */ ns = ph + 2 * ps; - PUT_32BE(buf, ph + PH_TYPE, PT_NOTE); - PUT_32BE(buf, ph + PH_OFFSET, ns); - PUT_32BE(buf, ph + PH_FILESZ, nnote); + PUT_32BE(ph + PH_TYPE, PT_NOTE); + PUT_32BE(ph + PH_OFFSET, ns); + PUT_32BE(ph + PH_FILESZ, nnote); /* fill in the note area we point to */ /* XXX we should probably make this a proper section */ - PUT_32BE(buf, ns, strlen(arch) + 1); - PUT_32BE(buf, ns + 4, N_DESCR * 4); - PUT_32BE(buf, ns + 8, 0x1275); + PUT_32BE(ns, strlen(arch) + 1); + PUT_32BE(ns + 4, N_DESCR * 4); + PUT_32BE(ns + 8, 0x1275); strcpy((char *) &buf[ns + 12], arch); ns += 12 + strlen(arch) + 1; for (i = 0; i < N_DESCR; ++i, ns += 4) - PUT_32BE(buf, ns, descr[i]); + PUT_32BE(ns, descr[i]); /* fill in the second program header entry and the RPA note area */ ph += ps; - PUT_32BE(buf, ph + PH_TYPE, PT_NOTE); - PUT_32BE(buf, ph + PH_OFFSET, ns); - PUT_32BE(buf, ph + PH_FILESZ, nnote2); + PUT_32BE(ph + PH_TYPE, PT_NOTE); + PUT_32BE(ph + PH_OFFSET, ns); + PUT_32BE(ph + PH_FILESZ, nnote2); /* fill in the note area we point to */ - if (rpap) { - /* RPA note supplied in file, just copy the whole thing over */ - memcpy(buf + ns, rpap, nnote2); - } else { - PUT_32BE(buf, ns, strlen(rpaname) + 1); - PUT_32BE(buf, ns + 4, sizeof(rpanote)); - PUT_32BE(buf, ns + 8, 0x12759999); - strcpy((char *) &buf[ns + 12], rpaname); - ns += 12 + ROUNDUP(strlen(rpaname) + 1); - for (i = 0; i < N_RPA_DESCR; ++i, ns += 4) - PUT_32BE(buf, ns, rpanote[i]); - } + PUT_32BE(ns, strlen(rpaname) + 1); + PUT_32BE(ns + 4, sizeof(rpanote)); + PUT_32BE(ns + 8, 0x12759999); + strcpy((char *) &buf[ns + 12], rpaname); + ns += 12 + ROUNDUP(strlen(rpaname) + 1); + for (i = 0; i < N_RPA_DESCR; ++i, ns += 4) + PUT_32BE(ns, rpanote[i]); /* Update the number of program headers */ - PUT_16BE(buf, E_PHNUM, np + 2); + PUT_16BE(E_PHNUM, np + 2); /* write back */ lseek(fd, (long) 0, SEEK_SET); @@ -273,18 +188,18 @@ main(int ac, char **av) exit(1); } if (i < n) { - fprintf(stderr, "%s: write truncated\n", av[ai]); + fprintf(stderr, "%s: write truncated\n", av[1]); exit(1); } exit(0); notelf: - fprintf(stderr, "%s does not appear to be an ELF file\n", av[ai]); + fprintf(stderr, "%s does not appear to be an ELF file\n", av[1]); exit(1); nospace: fprintf(stderr, "sorry, I can't find space in %s to put the note\n", - av[ai]); + av[1]); exit(1); } diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index f39073511a49..965c237c122d 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -306,13 +306,8 @@ fi # post-processing needed for some platforms case "$platform" in -pseries) - ${CROSS}objcopy -O binary -j .fakeelf "$kernel" "$ofile".rpanote - $objbin/addnote "$ofile" "$ofile".rpanote - rm -r "$ofile".rpanote - ;; -chrp) - $objbin/addnote -r c00000 "$ofile" +pseries|chrp) + $objbin/addnote "$ofile" ;; coff) ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile" diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 23e0db203329..2445945d3761 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -671,7 +671,7 @@ static struct fake_elf { u32 ignore_me; } rpadesc; } rpanote; -} fake_elf __section(.fakeelf) = { +} fake_elf = { .elfhdr = { .e_ident = { 0x7f, 'E', 'L', 'F', ELFCLASS32, ELFDATA2MSB, EV_CURRENT }, @@ -713,13 +713,13 @@ static struct fake_elf { .type = 0x12759999, .name = "IBM,RPA-Client-Config", .rpadesc = { - .lpar_affinity = 1, - .min_rmo_size = 128, /* in megabytes */ + .lpar_affinity = 0, + .min_rmo_size = 64, /* in megabytes */ .min_rmo_percent = 0, - .max_pft_size = 46, /* 2^46 bytes max PFT size */ + .max_pft_size = 48, /* 2^48 bytes max PFT size */ .splpar = 1, .min_load = ~0U, - .new_mem_def = 1 + .new_mem_def = 0 } } }; diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 384dca5a9c1d..2412c056baa4 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -205,9 +205,6 @@ SECTIONS } #endif - /* Fake ELF header containing RPA note; for addnote */ - .fakeelf : AT(ADDR(.fakeelf) - LOAD_OFFSET) { *(.fakeelf) } - /* freed after init ends here */ . = ALIGN(PAGE_SIZE); __init_end = .; -- cgit v1.2.3 From b27cf88e9592953ae292d05324887f2f44979433 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 31 Oct 2008 14:52:24 +0000 Subject: [JFFS2] Fix lack of locking in thread_should_wake() The thread_should_wake() function trawls through the list of 'very dirty' eraseblocks, determining whether the background GC thread should wake. Doing this without holding the appropriate locks is a bad idea. OLPC Trac #8615 Signed-off-by: David Woodhouse Cc: stable@kernel.org --- fs/jffs2/background.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c index 8adebd3e43c6..3cceef4ad2b7 100644 --- a/fs/jffs2/background.c +++ b/fs/jffs2/background.c @@ -85,15 +85,15 @@ static int jffs2_garbage_collect_thread(void *_c) for (;;) { allow_signal(SIGHUP); again: + spin_lock(&c->erase_completion_lock); if (!jffs2_thread_should_wake(c)) { set_current_state (TASK_INTERRUPTIBLE); + spin_unlock(&c->erase_completion_lock); D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread sleeping...\n")); - /* Yes, there's a race here; we checked jffs2_thread_should_wake() - before setting current->state to TASK_INTERRUPTIBLE. But it doesn't - matter - We don't care if we miss a wakeup, because the GC thread - is only an optimisation anyway. */ schedule(); - } + } else + spin_unlock(&c->erase_completion_lock); + /* This thread is purely an optimisation. But if it runs when other things could be running, it actually makes things a -- cgit v1.2.3 From 22cffe494b6b5773b44fe8bb8f41b471c1734b53 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 31 Oct 2008 16:09:47 +0100 Subject: Revert "Cell OProfile: Incorrect local array size in activate spu profiling function" This reverts commit fa448d6008cc81a3537e5db168fa0490e0caba68. --- arch/powerpc/oprofile/op_model_cell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 6b2d974880b6..35141a8bc3d9 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -830,7 +830,7 @@ static int calculate_lfsr(int n) static int pm_rtas_activate_spu_profiling(u32 node) { int ret, i; - struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; + struct pm_signal pm_signal_local[NR_PHYS_CTRS]; /* * Set up the rtas call to configure the debug bus to -- cgit v1.2.3 From 99219b4f3e0772a11fc0d98213b00e89fee7b049 Mon Sep 17 00:00:00 2001 From: Carl Love Date: Wed, 29 Oct 2008 08:06:45 -0700 Subject: Cell OProfile: Incorrect local array size in activate spu profiling function Updated the patch to address comments by Michael Ellerman. Specifically, changed upper limit in for loop to ARRAY_SIZE() macro and added a check to make sure the number of events specified by the user, which is used as the max for indexing various arrays, is no bigger then the declared size of the arrays. The size of the pm_signal_local array should be equal to the number of SPUs being configured in the array. Currently, the array is of size 4 (NR_PHYS_CTRS) but being indexed by a for loop from 0 to 7 (NUM_SPUS_PER_NODE). Signed-off-by: Carl Love --- arch/powerpc/oprofile/op_model_cell.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 35141a8bc3d9..25a4ec2514a3 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -582,6 +582,13 @@ static int cell_reg_setup(struct op_counter_config *ctr, num_counters = num_ctrs; + if (unlikely(num_ctrs > NR_PHYS_CTRS)) { + printk(KERN_ERR + "%s: Oprofile, number of specified events " \ + "exceeds number of physical counters\n", + __func__); + return -EIO; + } pm_regs.group_control = 0; pm_regs.debug_bus_control = 0; @@ -830,13 +837,13 @@ static int calculate_lfsr(int n) static int pm_rtas_activate_spu_profiling(u32 node) { int ret, i; - struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; /* * Set up the rtas call to configure the debug bus to * route the SPU PCs. Setup the pm_signal for each SPU */ - for (i = 0; i < NUM_SPUS_PER_NODE; i++) { + for (i = 0; i < ARRAY_SIZE(pm_signal_local); i++) { pm_signal_local[i].cpu = node; pm_signal_local[i].signal_group = 41; /* spu i on word (i/2) */ @@ -848,7 +855,7 @@ static int pm_rtas_activate_spu_profiling(u32 node) ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, pm_signal_local, - (NUM_SPUS_PER_NODE + (ARRAY_SIZE(pm_signal_local) * sizeof(struct pm_signal))); if (unlikely(ret)) { -- cgit v1.2.3 From 4605b718e8b8f0dd3d811ddf90f630fd0835b7bf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 Oct 2008 14:18:24 +0100 Subject: ALSA: hda - Disable broken mic auto-muting in Realtek codes The recent addition of automatic mic-muting is broken in some cases. The code assumes that the pin nids <= 0x18, but the digital pins can be less than 0x18. Also, it assumes the front-mic being the internal mic, but it depends on the hardware implementation actually. Instead of complex case-fixes, better to disable the code as now. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4eceab9bd109..a80d57cbc352 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -829,6 +829,7 @@ static void alc_sku_automute(struct hda_codec *codec) spec->jack_present ? 0 : PIN_OUT); } +#if 0 /* it's broken in some acses -- temporarily disabled */ static void alc_mic_automute(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; @@ -849,6 +850,9 @@ static void alc_mic_automute(struct hda_codec *codec) snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, capsrc_idx_fmic, HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); } +#else +#define alc_mic_automute(codec) /* NOP */ +#endif /* disabled */ /* unsolicited event for HP jack sensing */ static void alc_sku_unsol_event(struct hda_codec *codec, unsigned int res) @@ -1058,12 +1062,14 @@ do_sku: AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT); +#if 0 /* it's broken in some acses -- temporarily disabled */ if (spec->autocfg.input_pins[AUTO_PIN_MIC] && spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC]) snd_hda_codec_write(codec, spec->autocfg.input_pins[AUTO_PIN_MIC], 0, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT); +#endif /* disabled */ spec->unsol_event = alc_sku_unsol_event; } -- cgit v1.2.3 From ee956e090e114ede6542c76a7465ed6ce118ad52 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 Oct 2008 17:16:31 +0100 Subject: ALSA: hda - Add digital-mic for ALC269 auto-probe mode The digital mic wasn't detected properly for ALC269 auto-probing mode because of its widget number. Fixed now. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a80d57cbc352..d327a371595c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12244,8 +12244,26 @@ static int alc269_auto_create_multi_out_ctls(struct alc_spec *spec, return 0; } -#define alc269_auto_create_analog_input_ctls \ - alc880_auto_create_analog_input_ctls +static int alc269_auto_create_analog_input_ctls(struct alc_spec *spec, + const struct auto_pin_cfg *cfg) +{ + int err; + + err = alc880_auto_create_analog_input_ctls(spec, cfg); + if (err < 0) + return err; + /* digital-mic input pin is excluded in alc880_auto_create..() + * because it's under 0x18 + */ + if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 || + cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) { + struct hda_input_mux *imux = &spec->private_imux; + imux->items[imux->num_items].label = "Int Mic"; + imux->items[imux->num_items].index = 0x05; + imux->num_items++; + } + return 0; +} #ifdef CONFIG_SND_HDA_POWER_SAVE #define alc269_loopbacks alc880_loopbacks -- cgit v1.2.3 From 0365f707c99bf940a51c2a3ffc19f3ade2f700d4 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 21 Oct 2008 22:10:27 +0200 Subject: [CRIS] Merge asm-offsets.c for both arches into one file. Eliminates the link to arch specific asm-offsets.c from CRIS architecture build system. Resulting asm-offsets.s are identical before and after change for both arch-v10 and arch-v32. Signed-off-by: Jesper Nilsson Acked-by: Sam Ravnborg --- arch/cris/Makefile | 6 ++-- arch/cris/arch-v10/kernel/asm-offsets.c | 47 ------------------------ arch/cris/arch-v32/kernel/asm-offsets.c | 49 ------------------------- arch/cris/kernel/asm-offsets.c | 64 +++++++++++++++++++++++++++++++++ 4 files changed, 66 insertions(+), 100 deletions(-) delete mode 100644 arch/cris/arch-v10/kernel/asm-offsets.c delete mode 100644 arch/cris/arch-v32/kernel/asm-offsets.c create mode 100644 arch/cris/kernel/asm-offsets.c diff --git a/arch/cris/Makefile b/arch/cris/Makefile index 22825a7bbe57..241e35bc3b59 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -95,8 +95,6 @@ ifdef CONFIG_ETRAX_ARCH_V32 endif @rm -rf $(SRC_ARCH)/kernel/vmlinux.lds.S @ln -sfn ../$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S - @rm -rf $(SRC_ARCH)/kernel/asm-offsets.c - @ln -sfn ../$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c @touch $@ archclean: @@ -116,8 +114,8 @@ MRPROPER_FILES += \ $(SRC_ARCH)/boot \ $(SRC_ARCH)/lib \ $(SRC_ARCH)/arch \ - $(SRC_ARCH)/kernel/vmlinux.lds.S \ - $(SRC_ARCH)/kernel/asm-offsets.c + $(SRC_ARCH)/kernel/vmlinux.lds.S + define archhelp echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' diff --git a/arch/cris/arch-v10/kernel/asm-offsets.c b/arch/cris/arch-v10/kernel/asm-offsets.c deleted file mode 100644 index 1aa3cc4e7107..000000000000 --- a/arch/cris/arch-v10/kernel/asm-offsets.c +++ /dev/null @@ -1,47 +0,0 @@ -#include -#include - -/* - * Generate definitions needed by assembly language modules. - * This code generates raw asm output which is post-processed to extract - * and format the required data. - */ - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - -int main(void) -{ -#define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry)) - ENTRY(orig_r10); - ENTRY(r13); - ENTRY(r12); - ENTRY(r11); - ENTRY(r10); - ENTRY(r9); - ENTRY(mof); - ENTRY(dccr); - ENTRY(srp); - BLANK(); -#undef ENTRY -#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry)) - ENTRY(task); - ENTRY(flags); - ENTRY(preempt_count); - BLANK(); -#undef ENTRY -#define ENTRY(entry) DEFINE(THREAD_ ## entry, offsetof(struct thread_struct, entry)) - ENTRY(ksp); - ENTRY(usp); - ENTRY(dccr); - BLANK(); -#undef ENTRY -#define ENTRY(entry) DEFINE(TASK_ ## entry, offsetof(struct task_struct, entry)) - ENTRY(pid); - BLANK(); - DEFINE(LCLONE_VM, CLONE_VM); - DEFINE(LCLONE_UNTRACED, CLONE_UNTRACED); - return 0; -} diff --git a/arch/cris/arch-v32/kernel/asm-offsets.c b/arch/cris/arch-v32/kernel/asm-offsets.c deleted file mode 100644 index 15b3d93a0496..000000000000 --- a/arch/cris/arch-v32/kernel/asm-offsets.c +++ /dev/null @@ -1,49 +0,0 @@ -#include -#include - -/* - * Generate definitions needed by assembly language modules. - * This code generates raw asm output which is post-processed to extract - * and format the required data. - */ - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - -int main(void) -{ -#define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry)) - ENTRY(orig_r10); - ENTRY(r13); - ENTRY(r12); - ENTRY(r11); - ENTRY(r10); - ENTRY(r9); - ENTRY(acr); - ENTRY(srs); - ENTRY(mof); - ENTRY(ccs); - ENTRY(srp); - BLANK(); -#undef ENTRY -#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry)) - ENTRY(task); - ENTRY(flags); - ENTRY(preempt_count); - BLANK(); -#undef ENTRY -#define ENTRY(entry) DEFINE(THREAD_ ## entry, offsetof(struct thread_struct, entry)) - ENTRY(ksp); - ENTRY(usp); - ENTRY(ccs); - BLANK(); -#undef ENTRY -#define ENTRY(entry) DEFINE(TASK_ ## entry, offsetof(struct task_struct, entry)) - ENTRY(pid); - BLANK(); - DEFINE(LCLONE_VM, CLONE_VM); - DEFINE(LCLONE_UNTRACED, CLONE_UNTRACED); - return 0; -} diff --git a/arch/cris/kernel/asm-offsets.c b/arch/cris/kernel/asm-offsets.c new file mode 100644 index 000000000000..ddd6fbbe75de --- /dev/null +++ b/arch/cris/kernel/asm-offsets.c @@ -0,0 +1,64 @@ +#include +#include +#include + +/* + * Generate definitions needed by assembly language modules. + * This code generates raw asm output which is post-processed to extract + * and format the required data. + */ + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +#if !defined(CONFIG_ETRAX_ARCH_V10) && !defined(CONFIG_ETRAX_ARCH_V32) +#error One of ARCH v10 and ARCH v32 must be true! +#endif + +int main(void) +{ +#define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry)) + ENTRY(orig_r10); + ENTRY(r13); + ENTRY(r12); + ENTRY(r11); + ENTRY(r10); + ENTRY(r9); +#ifdef CONFIG_ETRAX_ARCH_V32 + ENTRY(acr); + ENTRY(srs); +#endif + ENTRY(mof); +#ifdef CONFIG_ETRAX_ARCH_V10 + ENTRY(dccr); +#else + ENTRY(ccs); +#endif + ENTRY(srp); + BLANK(); +#undef ENTRY +#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry)) + ENTRY(task); + ENTRY(flags); + ENTRY(preempt_count); + BLANK(); +#undef ENTRY +#define ENTRY(entry) DEFINE(THREAD_ ## entry, offsetof(struct thread_struct, entry)) + ENTRY(ksp); + ENTRY(usp); +#ifdef CONFIG_ETRAX_ARCH_V10 + ENTRY(dccr); +#else + ENTRY(ccs); +#endif + BLANK(); +#undef ENTRY +#define ENTRY(entry) DEFINE(TASK_ ## entry, offsetof(struct task_struct, entry)) + ENTRY(pid); + BLANK(); + DEFINE(LCLONE_VM, CLONE_VM); + DEFINE(LCLONE_UNTRACED, CLONE_UNTRACED); + return 0; +} -- cgit v1.2.3 From c5ec6fb08d7806cf1a9e4fceed15f5d4a69f885e Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Wed, 22 Oct 2008 23:57:53 +0200 Subject: [CRIS] Remove links from CRIS build Remove the links to architecture and machine dependent directories (boot, lib, drivers, arch, mach) The links were created and used mostly from the arch/cris/Makefile, so why not dispense with them altogether? Changed $(ARCH) to "cris" in Makefile, it is easier to read this way. The CRISv32 head.S common files for the kernel and compressed images needed to be modified to use ifdefs instead of using the now removed mach link. Since there are only two versions, this is not a huge loss in readability. The link to vmlinux.lds.S is also replaced with a merged version which uses ifdefs to select the correct layout. System.map before and after are identical. Signed-off-by: Jesper Nilsson Acked-by: Sam Ravnborg --- arch/cris/Makefile | 61 ++++-------- arch/cris/arch-v10/vmlinux.lds.S | 118 ----------------------- arch/cris/arch-v32/boot/compressed/head.S | 16 +++- arch/cris/arch-v32/kernel/head.S | 20 +++- arch/cris/arch-v32/vmlinux.lds.S | 133 -------------------------- arch/cris/kernel/vmlinux.lds.S | 151 ++++++++++++++++++++++++++++++ 6 files changed, 201 insertions(+), 298 deletions(-) delete mode 100644 arch/cris/arch-v10/vmlinux.lds.S delete mode 100644 arch/cris/arch-v32/vmlinux.lds.S create mode 100644 arch/cris/kernel/vmlinux.lds.S diff --git a/arch/cris/Makefile b/arch/cris/Makefile index 241e35bc3b59..3662cfb7b61d 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -23,7 +23,8 @@ mach-$(CONFIG_ETRAXFS) := fs ifneq ($(arch-y),) SARCH := arch-$(arch-y) -inc := -Iarch/cris/include/arch-$(arch-y) -Iarch/cris/include/arch-$(arch-y)/arch +inc := -Iarch/cris/include/$(SARCH) +inc += -Iarch/cris/include/$(SARCH)/arch else SARCH := inc := @@ -52,72 +53,48 @@ KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g KBUILD_CFLAGS += -fno-omit-frame-pointer endif -head-y := arch/$(ARCH)/$(SARCH)/kernel/head.o +head-y := arch/cris/$(SARCH)/kernel/head.o LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libgcc.a) -core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ -core-y += arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/ +core-y += arch/cris/kernel/ arch/cris/mm/ +core-y += arch/cris/$(SARCH)/kernel/ arch/cris/$(SARCH)/mm/ ifdef CONFIG_ETRAX_ARCH_V32 -core-y += arch/$(ARCH)/$(SARCH)/$(MACH)/ +core-y += arch/cris/$(SARCH)/$(MACH)/ endif -drivers-y += arch/$(ARCH)/$(SARCH)/drivers/ -libs-y += arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC) +drivers-y += arch/cris/$(SARCH)/drivers/ +libs-y += arch/cris/$(SARCH)/lib/ $(LIBGCC) # cris source path -SRC_ARCH = $(srctree)/arch/$(ARCH) +SRC_ARCH = $(srctree)/arch/cris # cris object files path -OBJ_ARCH = $(objtree)/arch/$(ARCH) +OBJ_ARCH = $(objtree)/arch/cris -boot := arch/$(ARCH)/boot -MACHINE := arch/$(ARCH)/$(SARCH) +boot := arch/cris/$(SARCH)/boot +MACHINE := arch/cris/$(SARCH) all: zImage zImage Image: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -archprepare: $(SRC_ARCH)/.links FORCE - -# Create some links to make all tools happy -$(SRC_ARCH)/.links: - @rm -rf $(SRC_ARCH)/drivers - @ln -sfn $(SARCH)/drivers $(SRC_ARCH)/drivers - @rm -rf $(SRC_ARCH)/boot - @ln -sfn $(SARCH)/boot $(SRC_ARCH)/boot - @rm -rf $(SRC_ARCH)/lib - @ln -sfn $(SARCH)/lib $(SRC_ARCH)/lib - @rm -f $(SRC_ARCH)/arch/mach - @rm -rf $(SRC_ARCH)/arch - @ln -sfn $(SARCH) $(SRC_ARCH)/arch -ifdef CONFIG_ETRAX_ARCH_V32 - @ln -sfn ../$(SARCH)/$(MACH) $(SRC_ARCH)/arch/mach -endif - @rm -rf $(SRC_ARCH)/kernel/vmlinux.lds.S - @ln -sfn ../$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S - @touch $@ +archprepare: archclean: - $(Q)if [ -e arch/$(ARCH)/boot ]; then \ - $(MAKE) $(clean)=arch/$(ARCH)/boot; \ + $(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \ + $(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \ fi CLEAN_FILES += \ $(MACHINE)/boot/zImage \ $(MACHINE)/boot/compressed/decompress.bin \ $(MACHINE)/boot/compressed/piggy.gz \ - $(MACHINE)/boot/rescue/rescue.bin \ - $(SRC_ARCH)/.links + $(MACHINE)/boot/rescue/rescue.bin -MRPROPER_FILES += \ - $(SRC_ARCH)/drivers \ - $(SRC_ARCH)/boot \ - $(SRC_ARCH)/lib \ - $(SRC_ARCH)/arch \ - $(SRC_ARCH)/kernel/vmlinux.lds.S +# MRPROPER_FILES += define archhelp - echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' - echo '* Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' + echo '* zImage - Compressed kernel image (arch/cris/boot/zImage)' + echo '* Image - Uncompressed kernel image (arch/cris/boot/Image)' endef diff --git a/arch/cris/arch-v10/vmlinux.lds.S b/arch/cris/arch-v10/vmlinux.lds.S deleted file mode 100644 index 93c9f0ea286b..000000000000 --- a/arch/cris/arch-v10/vmlinux.lds.S +++ /dev/null @@ -1,118 +0,0 @@ -/* ld script to make the Linux/CRIS kernel - * Authors: Bjorn Wesen (bjornw@axis.com) - * - * It is VERY DANGEROUS to fiddle around with the symbols in this - * script. It is for example quite vital that all generated sections - * that are used are actually named here, otherwise the linker will - * put them at the end, where the init stuff is which is FREED after - * the kernel has booted. - */ - -#include -#include - -jiffies = jiffies_64; -SECTIONS -{ - . = DRAM_VIRTUAL_BASE; - dram_start = .; - ibr_start = .; - . = . + 0x4000; /* see head.S and pages reserved at the start */ - - _text = .; /* Text and read-only data */ - text_start = .; /* lots of aliases */ - _stext = .; - __stext = .; - .text : { - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - *(.fixup) - *(.text.__*) - } - - _etext = . ; /* End of text section */ - __etext = .; - - . = ALIGN(4); /* Exception table */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - RODATA - - . = ALIGN (4); - ___data_start = . ; - __Sdata = . ; - .data : { /* Data */ - DATA_DATA - } - __edata = . ; /* End of data section */ - _edata = . ; - - . = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned */ - .data.init_task : { *(.data.init_task) } - - . = ALIGN(PAGE_SIZE); /* Init code and data */ - __init_begin = .; - .init.text : { - _sinittext = .; - INIT_TEXT - _einittext = .; - } - .init.data : { INIT_DATA } - . = ALIGN(16); - __setup_start = .; - .init.setup : { *(.init.setup) } - __setup_end = .; - .initcall.init : { - __initcall_start = .; - INITCALLS - __initcall_end = .; - } - - .con_initcall.init : { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - SECURITY_INIT - -#ifdef CONFIG_BLK_DEV_INITRD - .init.ramfs : { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } -#endif - __vmlinux_end = .; /* last address of the physical file */ - - /* - * We fill to the next page, so we can discard all init - * pages without needing to consider what payload might be - * appended to the kernel image. - */ - . = ALIGN(PAGE_SIZE); - - __init_end = .; - - __data_end = . ; /* Move to _edata ? */ - __bss_start = .; /* BSS */ - .bss : { - *(COMMON) - *(.bss) - } - - . = ALIGN (0x20); - _end = .; - __end = .; - - /* Sections to be discarded */ - /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - } - - dram_end = dram_start + CONFIG_ETRAX_DRAM_SIZE*1024*1024; -} diff --git a/arch/cris/arch-v32/boot/compressed/head.S b/arch/cris/arch-v32/boot/compressed/head.S index ea3012993b07..a4a65c5c669e 100644 --- a/arch/cris/arch-v32/boot/compressed/head.S +++ b/arch/cris/arch-v32/boot/compressed/head.S @@ -28,7 +28,13 @@ _start: beq dram_init_finished nop -#include "../../mach/dram_init.S" +#if defined CONFIG_ETRAXFS +#include "../../mach-fs/dram_init.S" +#elif defined CONFIG_CRIS_MACH_ARTPEC3 +#include "../../mach-a3/dram_init.S" +#else +#error Only ETRAXFS and ARTPEC-3 supported! +#endif dram_init_finished: @@ -130,4 +136,10 @@ _cmd_line_addr: _boot_source: .dword 0 -#include "../../mach/hw_settings.S" +#if defined CONFIG_ETRAXFS +#include "../../mach-fs/hw_settings.S" +#elif defined CONFIG_CRIS_MACH_ARTPEC3 +#include "../../mach-a3/hw_settings.S" +#else +#error Only ETRAXFS and ARTPEC-3 supported! +#endif diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S index f902d87fb5de..3db478eb5155 100644 --- a/arch/cris/arch-v32/kernel/head.S +++ b/arch/cris/arch-v32/kernel/head.S @@ -10,8 +10,9 @@ * The macros found in mmu_defs_asm.h uses the ## concatenation operator, so * -traditional must not be used when assembling this file. */ -#include +#include #include +#include #include #include #include @@ -217,7 +218,14 @@ _inflash: beq _dram_initialized nop -#include "../mach/dram_init.S" +#if defined CONFIG_ETRAXFS +#include "../mach-fs/dram_init.S" +#elif defined CONFIG_CRIS_MACH_ARTPEC3 +#include "../mach-a3/dram_init.S" +#else +#error Only ETRAXFS and ARTPEC-3 supported! +#endif + _dram_initialized: ;; Copy the text and data section to DRAM. This depends on that the @@ -472,4 +480,10 @@ swapper_pg_dir = 0xc0002000 .section ".init.data", "aw" -#include "../mach/hw_settings.S" +#if defined CONFIG_ETRAXFS +#include "../mach-fs/hw_settings.S" +#elif defined CONFIG_CRIS_MACH_ARTPEC3 +#include "../mach-a3/hw_settings.S" +#else +#error Only ETRAXFS and ARTPEC-3 supported! +#endif diff --git a/arch/cris/arch-v32/vmlinux.lds.S b/arch/cris/arch-v32/vmlinux.lds.S deleted file mode 100644 index d5f28e40717c..000000000000 --- a/arch/cris/arch-v32/vmlinux.lds.S +++ /dev/null @@ -1,133 +0,0 @@ -/* ld script to make the Linux/CRIS kernel - * Authors: Bjorn Wesen (bjornw@axis.com) - * - * It is VERY DANGEROUS to fiddle around with the symbols in this - * script. It is for example quite vital that all generated sections - * that are used are actually named here, otherwise the linker will - * put them at the end, where the init stuff is which is FREED after - * the kernel has booted. - */ - -#include -#include - -#ifdef CONFIG_ETRAX_VMEM_SIZE -#define __CONFIG_ETRAX_VMEM_SIZE CONFIG_ETRAX_VMEM_SIZE -#else -#define __CONFIG_ETRAX_VMEM_SIZE 0 -#endif - -jiffies = jiffies_64; -SECTIONS -{ - . = DRAM_VIRTUAL_BASE; - dram_start = .; - ebp_start = .; - - /* The boot section is only necessary until the VCS top */ - /* level testbench includes both flash and DRAM. */ - .boot : { *(.boot) } - - /* See head.S and pages reserved at the start. */ - . = DRAM_VIRTUAL_BASE + 0x4000; - - _text = .; /* Text and read-only data. */ - text_start = .; /* Lots of aliases. */ - _stext = .; - __stext = .; - .text : { - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - *(.fixup) - *(.text.__*) - } - - _etext = . ; /* End of text section. */ - __etext = .; - - . = ALIGN(4); /* Exception table. */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - RODATA - - . = ALIGN (4); - ___data_start = . ; - __Sdata = . ; - .data : { /* Data */ - DATA_DATA - } - __edata = . ; /* End of data section. */ - _edata = . ; - - . = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned. */ - .data.init_task : { *(.data.init_task) } - - . = ALIGN(PAGE_SIZE); /* Init code and data. */ - __init_begin = .; - .init.text : { - _sinittext = .; - INIT_TEXT - _einittext = .; - } - .init.data : { INIT_DATA } - . = ALIGN(16); - __setup_start = .; - .init.setup : { *(.init.setup) } - __setup_end = .; - __start___param = .; - __param : { *(__param) } - __stop___param = .; - .initcall.init : { - __initcall_start = .; - INITCALLS - __initcall_end = .; - } - - .con_initcall.init : { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - SECURITY_INIT - - __vmlinux_end = .; /* Last address of the physical file. */ - PERCPU(PAGE_SIZE) - - .init.ramfs : { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } - - /* - * We fill to the next page, so we can discard all init - * pages without needing to consider what payload might be - * appended to the kernel image. - */ - . = ALIGN (PAGE_SIZE); - - __init_end = .; - - __data_end = . ; /* Move to _edata? */ - __bss_start = .; /* BSS. */ - .bss : { - *(COMMON) - *(.bss) - } - - . = ALIGN (0x20); - _end = .; - __end = .; - - /* Sections to be discarded */ - /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - } - - dram_end = dram_start + (CONFIG_ETRAX_DRAM_SIZE - __CONFIG_ETRAX_VMEM_SIZE)*1024*1024; -} diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S new file mode 100644 index 000000000000..0d2adfc794d4 --- /dev/null +++ b/arch/cris/kernel/vmlinux.lds.S @@ -0,0 +1,151 @@ +/* ld script to make the Linux/CRIS kernel + * Authors: Bjorn Wesen (bjornw@axis.com) + * + * It is VERY DANGEROUS to fiddle around with the symbols in this + * script. It is for example quite vital that all generated sections + * that are used are actually named here, otherwise the linker will + * put them at the end, where the init stuff is which is FREED after + * the kernel has booted. + */ + +#include +#include +#include + +#ifdef CONFIG_ETRAX_VMEM_SIZE +#define __CONFIG_ETRAX_VMEM_SIZE CONFIG_ETRAX_VMEM_SIZE +#else +#define __CONFIG_ETRAX_VMEM_SIZE 0 +#endif + + +jiffies = jiffies_64; +SECTIONS +{ + . = DRAM_VIRTUAL_BASE; + dram_start = .; +#ifdef CONFIG_ETRAX_ARCH_V10 + ibr_start = .; +#else + ebp_start = .; + /* The boot section is only necessary until the VCS top */ + /* level testbench includes both flash and DRAM. */ + .boot : { *(.boot) } +#endif + + /* see head.S and pages reserved at the start */ + . = DRAM_VIRTUAL_BASE + 0x4000; + + _text = .; /* Text and read-only data. */ + text_start = .; /* Lots of aliases. */ + _stext = .; + __stext = .; + .text : { + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + *(.fixup) + *(.text.__*) + } + + _etext = . ; /* End of text section. */ + __etext = .; + + . = ALIGN(4); /* Exception table. */ + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + RODATA + + . = ALIGN (4); + ___data_start = . ; + __Sdata = . ; + .data : { /* Data */ + DATA_DATA + } + __edata = . ; /* End of data section. */ + _edata = . ; + + . = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned. */ + .data.init_task : { *(.data.init_task) } + + . = ALIGN(PAGE_SIZE); /* Init code and data. */ + __init_begin = .; + .init.text : { + _sinittext = .; + INIT_TEXT + _einittext = .; + } + .init.data : { INIT_DATA } + . = ALIGN(16); + __setup_start = .; + .init.setup : { *(.init.setup) } + __setup_end = .; +#ifdef CONFIG_ETRAX_ARCH_V32 + __start___param = .; + __param : { *(__param) } + __stop___param = .; +#endif + .initcall.init : { + __initcall_start = .; + INITCALLS + __initcall_end = .; + } + + .con_initcall.init : { + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + } + SECURITY_INIT + +#ifdef CONFIG_ETRAX_ARCH_V10 +#ifdef CONFIG_BLK_DEV_INITRD + .init.ramfs : { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + } +#endif +#endif + __vmlinux_end = .; /* Last address of the physical file. */ +#ifdef CONFIG_ETRAX_ARCH_V32 + PERCPU(PAGE_SIZE) + + .init.ramfs : { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + } +#endif + + /* + * We fill to the next page, so we can discard all init + * pages without needing to consider what payload might be + * appended to the kernel image. + */ + . = ALIGN(PAGE_SIZE); + + __init_end = .; + + __data_end = . ; /* Move to _edata ? */ + __bss_start = .; /* BSS. */ + .bss : { + *(COMMON) + *(.bss) + } + + . = ALIGN (0x20); + _end = .; + __end = .; + + /* Sections to be discarded */ + /DISCARD/ : { + EXIT_TEXT + EXIT_DATA + *(.exitcall.exit) + } + + dram_end = dram_start + (CONFIG_ETRAX_DRAM_SIZE - __CONFIG_ETRAX_VMEM_SIZE)*1024*1024; +} -- cgit v1.2.3 From 37dd0bd04a3240d2922786d501e2f12cec858fbf Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Fri, 31 Oct 2008 17:40:00 -0400 Subject: SELinux: properly handle empty tty_files list SELinux has wrongly (since 2004) had an incorrect test for an empty tty->tty_files list. With an empty list selinux would be pointing to part of the tty struct itself and would then proceed to dereference that value and again dereference that result. An F10 change to plymouth on a ppc64 system is actually currently triggering this bug. This patch uses list_empty() to handle empty lists rather than looking at a meaningless location. [note, this fixes the oops reported in https://bugzilla.redhat.com/show_bug.cgi?id=469079] Signed-off-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 3e3fde7c1d2b..f85597a4d733 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2126,14 +2126,16 @@ static inline void flush_unauthorized_files(struct files_struct *files) tty = get_current_tty(); if (tty) { file_list_lock(); - file = list_entry(tty->tty_files.next, typeof(*file), f_u.fu_list); - if (file) { + if (!list_empty(&tty->tty_files)) { + struct inode *inode; + /* Revalidate access to controlling tty. Use inode_has_perm on the tty inode directly rather than using file_has_perm, as this particular open file may belong to another process and we are only interested in the inode-based check here. */ - struct inode *inode = file->f_path.dentry->d_inode; + file = list_first_entry(&tty->tty_files, struct file, f_u.fu_list); + inode = file->f_path.dentry->d_inode; if (inode_has_perm(current, inode, FILE__READ | FILE__WRITE, NULL)) { drop_tty = 1; -- cgit v1.2.3 From 920da6923cf03c8a78fbaffa408f8ab37f6abfc1 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 31 Oct 2008 16:41:26 -0700 Subject: key: fix setkey(8) policy set breakage Steps to reproduce: #/usr/sbin/setkey -f flush; spdflush; add 192.168.0.42 192.168.0.1 ah 24500 -A hmac-md5 "1234567890123456"; add 192.168.0.42 192.168.0.1 esp 24501 -E 3des-cbc "123456789012123456789012"; spdadd 192.168.0.42 192.168.0.1 any -P out ipsec esp/transport//require ah/transport//require; setkey: invalid keymsg length Policy dump will bail out with the same message after that. -recv(4, "\2\16\0\0\32\0\3\0\0\0\0\0\37\r\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208 +recv(4, "\2\16\0\0\36\0\3\0\0\0\0\0H\t\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208 Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/key/af_key.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index e55e0441e4d9..3440a4637f01 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -2075,7 +2075,6 @@ static int pfkey_xfrm_policy2msg(struct sk_buff *skb, struct xfrm_policy *xp, in req_size += socklen * 2; } else { size -= 2*socklen; - socklen = 0; } rq = (void*)skb_put(skb, req_size); pol->sadb_x_policy_len += req_size/8; -- cgit v1.2.3 From 3318a386e4ca68c76e0294363d29bdc46fcad670 Mon Sep 17 00:00:00 2001 From: Serge Hallyn Date: Thu, 30 Oct 2008 11:52:23 -0500 Subject: file caps: always start with clear bprm->caps_* While Linux doesn't honor setuid on scripts. However, it mistakenly behaves differently for file capabilities. This patch fixes that behavior by making sure that get_file_caps() begins with empty bprm->caps_*. That way when a script is loaded, its bprm->caps_* may be filled when binfmt_misc calls prepare_binprm(), but they will be cleared again when binfmt_elf calls prepare_binprm() next to read the interpreter's file capabilities. Signed-off-by: Serge Hallyn Acked-by: David Howells Acked-by: Andrew G. Morgan Signed-off-by: Linus Torvalds --- security/commoncap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/security/commoncap.c b/security/commoncap.c index 399bfdb9e2da..3976613db829 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -279,10 +279,10 @@ static int get_file_caps(struct linux_binprm *bprm) struct vfs_cap_data vcaps; struct inode *inode; - if (bprm->file->f_vfsmnt->mnt_flags & MNT_NOSUID) { - bprm_clear_caps(bprm); + bprm_clear_caps(bprm); + + if (bprm->file->f_vfsmnt->mnt_flags & MNT_NOSUID) return 0; - } dentry = dget(bprm->file->f_dentry); inode = dentry->d_inode; -- cgit v1.2.3 From 233e70f4228e78eb2f80dc6650f65d3ae3dbf17c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 31 Oct 2008 23:28:30 +0000 Subject: saner FASYNC handling on file close As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/ia64/kernel/perfmon.c | 5 ----- drivers/char/hpet.c | 3 --- drivers/char/ipmi/ipmi_devintf.c | 2 -- drivers/char/ipmi/ipmi_watchdog.c | 1 - drivers/char/random.c | 7 ------- drivers/char/rtc.c | 2 -- drivers/char/sonypi.c | 1 - drivers/gpu/drm/drm_fops.c | 2 -- drivers/hid/usbhid/hiddev.c | 2 -- drivers/ieee1394/dv1394.c | 3 --- drivers/infiniband/core/uverbs_main.c | 2 -- drivers/input/evdev.c | 1 - drivers/input/joydev.c | 1 - drivers/input/misc/hp_sdc_rtc.c | 13 ------------- drivers/input/mousedev.c | 1 - drivers/input/serio/serio_raw.c | 1 - drivers/message/fusion/mptctl.c | 7 ------- drivers/message/i2o/i2o_config.c | 21 +++++---------------- drivers/misc/sony-laptop.c | 1 - drivers/net/tun.c | 2 -- drivers/rtc/rtc-dev.c | 3 --- drivers/scsi/megaraid/megaraid_sas.c | 12 ------------ drivers/scsi/sg.c | 1 - drivers/staging/me4000/me4000.c | 3 --- drivers/telephony/ixj.c | 1 - drivers/uio/uio.c | 3 --- drivers/usb/gadget/inode.c | 1 - fs/file_table.c | 4 ++++ fs/fuse/dev.c | 1 - fs/inotify_user.c | 3 --- fs/pipe.c | 3 --- net/socket.c | 1 - sound/core/control.c | 1 - sound/core/init.c | 5 ++++- sound/core/pcm_native.c | 1 - sound/core/timer.c | 1 - 36 files changed, 13 insertions(+), 109 deletions(-) diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index ada4605d1223..6543a5547c84 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -1995,11 +1995,6 @@ pfm_close(struct inode *inode, struct file *filp) return -EBADF; } - if (filp->f_flags & FASYNC) { - DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue)); - pfm_do_fasync(-1, filp, ctx, 0); - } - PROTECT_CTX(ctx, flags); state = ctx->ctx_state; diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 408f5f92cb4e..53fdc7ff3870 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -427,9 +427,6 @@ static int hpet_release(struct inode *inode, struct file *file) if (irq) free_irq(irq, devp); - if (file->f_flags & FASYNC) - hpet_fasync(-1, file, 0); - file->private_data = NULL; return 0; } diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index 1d7b429f7ffa..41fc11dc921c 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -162,8 +162,6 @@ static int ipmi_release(struct inode *inode, struct file *file) if (rv) return rv; - ipmi_fasync (-1, file, 0); - /* FIXME - free the messages in the list. */ kfree(priv); diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index 235fab0bdf79..a4d57e31f713 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -870,7 +870,6 @@ static int ipmi_close(struct inode *ino, struct file *filep) clear_bit(0, &ipmi_wdog_open); } - ipmi_fasync(-1, filep, 0); expect_close = 0; return 0; diff --git a/drivers/char/random.c b/drivers/char/random.c index 705a839f1796..675076f5fca8 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1139,18 +1139,12 @@ static int random_fasync(int fd, struct file *filp, int on) return fasync_helper(fd, filp, on, &fasync); } -static int random_release(struct inode *inode, struct file *filp) -{ - return fasync_helper(-1, filp, 0, &fasync); -} - const struct file_operations random_fops = { .read = random_read, .write = random_write, .poll = random_poll, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, - .release = random_release, }; const struct file_operations urandom_fops = { @@ -1158,7 +1152,6 @@ const struct file_operations urandom_fops = { .write = random_write, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, - .release = random_release, }; /*************************************************************** diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index 32dc89720d58..20d6efb6324e 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -788,8 +788,6 @@ static int rtc_release(struct inode *inode, struct file *file) } spin_unlock_irq(&rtc_lock); - if (file->f_flags & FASYNC) - rtc_fasync(-1, file, 0); no_irq: #endif diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 85e0eb76eeab..2457b07dabd6 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -898,7 +898,6 @@ static int sonypi_misc_fasync(int fd, struct file *filp, int on) static int sonypi_misc_release(struct inode *inode, struct file *file) { - sonypi_misc_fasync(-1, file, 0); mutex_lock(&sonypi_device.lock); sonypi_device.open_count--; mutex_unlock(&sonypi_device.lock); diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index 0d46627663b1..78eeed5caaff 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -406,8 +406,6 @@ int drm_release(struct inode *inode, struct file *filp) if (dev->driver->driver_features & DRIVER_GEM) drm_gem_release(dev, file_priv); - drm_fasync(-1, filp, 0); - mutex_lock(&dev->ctxlist_mutex); if (!list_empty(&dev->ctxlist)) { struct drm_ctx_list *pos, *n; diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 3ac320785fc5..83e851a5ed30 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -242,8 +242,6 @@ static int hiddev_release(struct inode * inode, struct file * file) struct hiddev_list *list = file->private_data; unsigned long flags; - hiddev_fasync(-1, file, 0); - spin_lock_irqsave(&list->hiddev->list_lock, flags); list_del(&list->node); spin_unlock_irqrestore(&list->hiddev->list_lock, flags); diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index 2f83543a9dfc..965cfdb84ebc 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -1828,9 +1828,6 @@ static int dv1394_release(struct inode *inode, struct file *file) /* OK to free the DMA buffer, no more mappings can exist */ do_dv1394_shutdown(video, 1); - /* clean up async I/O users */ - dv1394_fasync(-1, file, 0); - /* give someone else a turn */ clear_bit(0, &video->open); diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index d85af1b67027..eb36a81dd09b 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -358,8 +358,6 @@ static int ib_uverbs_event_close(struct inode *inode, struct file *filp) } spin_unlock_irq(&file->lock); - ib_uverbs_event_fasync(-1, filp, 0); - if (file->is_async) { ib_unregister_event_handler(&file->uverbs_file->event_handler); kref_put(&file->uverbs_file->ref, ib_uverbs_release_file); diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 3524bef62be6..1070db330d35 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -235,7 +235,6 @@ static int evdev_release(struct inode *inode, struct file *file) evdev_ungrab(evdev, client); mutex_unlock(&evdev->mutex); - evdev_fasync(-1, file, 0); evdev_detach_client(evdev, client); kfree(client); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 65d7077a75a1..a85b1485e774 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -244,7 +244,6 @@ static int joydev_release(struct inode *inode, struct file *file) struct joydev_client *client = file->private_data; struct joydev *joydev = client->joydev; - joydev_fasync(-1, file, 0); joydev_detach_client(joydev, client); kfree(client); diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c index 82ec6b1b6467..216a559f55ea 100644 --- a/drivers/input/misc/hp_sdc_rtc.c +++ b/drivers/input/misc/hp_sdc_rtc.c @@ -71,7 +71,6 @@ static int hp_sdc_rtc_ioctl(struct inode *inode, struct file *file, static unsigned int hp_sdc_rtc_poll(struct file *file, poll_table *wait); static int hp_sdc_rtc_open(struct inode *inode, struct file *file); -static int hp_sdc_rtc_release(struct inode *inode, struct file *file); static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on); static int hp_sdc_rtc_read_proc(char *page, char **start, off_t off, @@ -414,17 +413,6 @@ static int hp_sdc_rtc_open(struct inode *inode, struct file *file) return 0; } -static int hp_sdc_rtc_release(struct inode *inode, struct file *file) -{ - /* Turn off interrupts? */ - - if (file->f_flags & FASYNC) { - hp_sdc_rtc_fasync (-1, file, 0); - } - - return 0; -} - static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on) { return fasync_helper (fd, filp, on, &hp_sdc_rtc_async_queue); @@ -680,7 +668,6 @@ static const struct file_operations hp_sdc_rtc_fops = { .poll = hp_sdc_rtc_poll, .ioctl = hp_sdc_rtc_ioctl, .open = hp_sdc_rtc_open, - .release = hp_sdc_rtc_release, .fasync = hp_sdc_rtc_fasync, }; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 8137e50ded87..d8c056fe7e98 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -519,7 +519,6 @@ static int mousedev_release(struct inode *inode, struct file *file) struct mousedev_client *client = file->private_data; struct mousedev *mousedev = client->mousedev; - mousedev_fasync(-1, file, 0); mousedev_detach_client(mousedev, client); kfree(client); diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c index 470770c09260..06bbd0e74c6f 100644 --- a/drivers/input/serio/serio_raw.c +++ b/drivers/input/serio/serio_raw.c @@ -135,7 +135,6 @@ static int serio_raw_release(struct inode *inode, struct file *file) mutex_lock(&serio_raw_mutex); - serio_raw_fasync(-1, file, 0); serio_raw_cleanup(serio_raw); mutex_unlock(&serio_raw_mutex); diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index f5233f3d9eff..b89f476cd0a9 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -559,12 +559,6 @@ mptctl_fasync(int fd, struct file *filep, int mode) return ret; } -static int -mptctl_release(struct inode *inode, struct file *filep) -{ - return fasync_helper(-1, filep, 0, &async_queue); -} - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * MPT ioctl handler @@ -2706,7 +2700,6 @@ mptctl_hp_targetinfo(unsigned long arg) static const struct file_operations mptctl_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .release = mptctl_release, .fasync = mptctl_fasync, .unlocked_ioctl = mptctl_ioctl, #ifdef CONFIG_COMPAT diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c index a3fabdbe6ca6..f3384c32b9a1 100644 --- a/drivers/message/i2o/i2o_config.c +++ b/drivers/message/i2o/i2o_config.c @@ -1097,28 +1097,17 @@ static int cfg_fasync(int fd, struct file *fp, int on) static int cfg_release(struct inode *inode, struct file *file) { ulong id = (ulong) file->private_data; - struct i2o_cfg_info *p1, *p2; + struct i2o_cfg_info *p, **q; unsigned long flags; lock_kernel(); - p1 = p2 = NULL; - spin_lock_irqsave(&i2o_config_lock, flags); - for (p1 = open_files; p1;) { - if (p1->q_id == id) { - - if (p1->fasync) - cfg_fasync(-1, file, 0); - if (p2) - p2->next = p1->next; - else - open_files = p1->next; - - kfree(p1); + for (q = &open_files; (p = *q) != NULL; q = &p->next) { + if (p->q_id == id) { + *q = p->next; + kfree(p); break; } - p2 = p1; - p1 = p1->next; } spin_unlock_irqrestore(&i2o_config_lock, flags); unlock_kernel(); diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index f483c4221f76..06f07e19dc70 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1920,7 +1920,6 @@ static int sonypi_misc_fasync(int fd, struct file *filp, int on) static int sonypi_misc_release(struct inode *inode, struct file *file) { - sonypi_misc_fasync(-1, file, 0); atomic_dec(&sonypi_compat.open_count); return 0; } diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 6daea0c91862..33b6d1b122fb 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1070,8 +1070,6 @@ static int tun_chr_close(struct inode *inode, struct file *file) DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name); - tun_chr_fasync(-1, file, 0); - rtnl_lock(); /* Detach from net device */ diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 079e9ed907e0..ecdea44ae4e5 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -446,9 +446,6 @@ static int rtc_dev_release(struct inode *inode, struct file *file) if (rtc->ops->release) rtc->ops->release(rtc->dev.parent); - if (file->f_flags & FASYNC) - rtc_dev_fasync(-1, file, 0); - clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags); return 0; } diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index afe1de998763..a454f94623d7 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2987,17 +2987,6 @@ static int megasas_mgmt_open(struct inode *inode, struct file *filep) return 0; } -/** - * megasas_mgmt_release - char node "release" entry point - */ -static int megasas_mgmt_release(struct inode *inode, struct file *filep) -{ - filep->private_data = NULL; - fasync_helper(-1, filep, 0, &megasas_async_queue); - - return 0; -} - /** * megasas_mgmt_fasync - Async notifier registration from applications * @@ -3345,7 +3334,6 @@ megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd, static const struct file_operations megasas_mgmt_fops = { .owner = THIS_MODULE, .open = megasas_mgmt_open, - .release = megasas_mgmt_release, .fasync = megasas_mgmt_fasync, .unlocked_ioctl = megasas_mgmt_ioctl, #ifdef CONFIG_COMPAT diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 9adf35bd8b56..5103855242ae 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -327,7 +327,6 @@ sg_release(struct inode *inode, struct file *filp) if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; SCSI_LOG_TIMEOUT(3, printk("sg_release: %s\n", sdp->disk->disk_name)); - sg_fasync(-1, filp, 0); /* remove filp from async notification list */ if (0 == sg_remove_sfp(sdp, sfp)) { /* Returns 1 when sdp gone */ if (!sdp->detached) { scsi_device_put(sdp->device); diff --git a/drivers/staging/me4000/me4000.c b/drivers/staging/me4000/me4000.c index 0b33773bb4f6..cf8b01bcac8d 100644 --- a/drivers/staging/me4000/me4000.c +++ b/drivers/staging/me4000/me4000.c @@ -1633,9 +1633,6 @@ static int me4000_release(struct inode *inode_p, struct file *file_p) free_irq(ext_int_context->irq, ext_int_context); - /* Delete the fasync structure and free memory */ - me4000_ext_int_fasync(0, file_p, 0); - /* Mark as unused */ ext_int_context->in_use = 0; } else { diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c index 41b6530b8f25..a913efc69669 100644 --- a/drivers/telephony/ixj.c +++ b/drivers/telephony/ixj.c @@ -2328,7 +2328,6 @@ static int ixj_release(struct inode *inode, struct file *file_p) j->rec_codec = j->play_codec = 0; j->rec_frame_size = j->play_frame_size = 0; j->flags.cidsent = j->flags.cidring = 0; - ixj_fasync(-1, file_p, 0); /* remove from list of async notification */ if(j->cardtype == QTI_LINEJACK && !j->readers && !j->writers) { ixj_set_port(j, PORT_PSTN); diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index f9b4647255aa..2d2440cd57a9 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -367,9 +367,6 @@ static int uio_release(struct inode *inode, struct file *filep) ret = idev->info->release(idev->info, inode); module_put(idev->owner); - - if (filep->f_flags & FASYNC) - ret = uio_fasync(-1, filep, 0); kfree(listener); return ret; } diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index f4585d3e90d7..eeb26c0f88e5 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1251,7 +1251,6 @@ dev_release (struct inode *inode, struct file *fd) * alternatively, all host requests will time out. */ - fasync_helper (-1, fd, 0, &dev->fasync); kfree (dev->buf); dev->buf = NULL; put_dev (dev); diff --git a/fs/file_table.c b/fs/file_table.c index efc06faede6c..5ad0eca6eea2 100644 --- a/fs/file_table.c +++ b/fs/file_table.c @@ -269,6 +269,10 @@ void __fput(struct file *file) eventpoll_release(file); locks_remove_flock(file); + if (unlikely(file->f_flags & FASYNC)) { + if (file->f_op && file->f_op->fasync) + file->f_op->fasync(-1, file, 0); + } if (file->f_op && file->f_op->release) file->f_op->release(inode, file); security_file_free(file); diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 87250b6a8682..b72361479be2 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -1056,7 +1056,6 @@ static int fuse_dev_release(struct inode *inode, struct file *file) end_requests(fc, &fc->pending); end_requests(fc, &fc->processing); spin_unlock(&fc->lock); - fasync_helper(-1, file, 0, &fc->fasync); fuse_conn_put(fc); } diff --git a/fs/inotify_user.c b/fs/inotify_user.c index d85c7d931cdf..d367e9b92862 100644 --- a/fs/inotify_user.c +++ b/fs/inotify_user.c @@ -537,9 +537,6 @@ static int inotify_release(struct inode *ignored, struct file *file) inotify_dev_event_dequeue(dev); mutex_unlock(&dev->ev_mutex); - if (file->f_flags & FASYNC) - inotify_fasync(-1, file, 0); - /* free this device: the put matching the get in inotify_init() */ put_inotify_dev(dev); diff --git a/fs/pipe.c b/fs/pipe.c index fcba6542b8d0..7aea8b89baac 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -717,14 +717,12 @@ pipe_rdwr_fasync(int fd, struct file *filp, int on) static int pipe_read_release(struct inode *inode, struct file *filp) { - pipe_read_fasync(-1, filp, 0); return pipe_release(inode, 1, 0); } static int pipe_write_release(struct inode *inode, struct file *filp) { - pipe_write_fasync(-1, filp, 0); return pipe_release(inode, 0, 1); } @@ -733,7 +731,6 @@ pipe_rdwr_release(struct inode *inode, struct file *filp) { int decr, decw; - pipe_rdwr_fasync(-1, filp, 0); decr = (filp->f_mode & FMODE_READ) != 0; decw = (filp->f_mode & FMODE_WRITE) != 0; return pipe_release(inode, decr, decw); diff --git a/net/socket.c b/net/socket.c index 2b7a4b5c9b72..57550c3bcabe 100644 --- a/net/socket.c +++ b/net/socket.c @@ -990,7 +990,6 @@ static int sock_close(struct inode *inode, struct file *filp) printk(KERN_DEBUG "sock_close: NULL inode\n"); return 0; } - sock_fasync(-1, filp, 0); sock_release(SOCKET_I(inode)); return 0; } diff --git a/sound/core/control.c b/sound/core/control.c index b0bf42691047..636b3b52ef8b 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -113,7 +113,6 @@ static int snd_ctl_release(struct inode *inode, struct file *file) unsigned int idx; ctl = file->private_data; - fasync_helper(-1, file, 0, &ctl->fasync); file->private_data = NULL; card = ctl->card; write_lock_irqsave(&card->ctl_files_rwlock, flags); diff --git a/sound/core/init.c b/sound/core/init.c index ef2352c2e451..b47ff8b44be8 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -264,8 +264,11 @@ static int snd_disconnect_release(struct inode *inode, struct file *file) } spin_unlock(&shutdown_lock); - if (likely(df)) + if (likely(df)) { + if ((file->f_flags & FASYNC) && df->disconnected_f_op->fasync) + df->disconnected_f_op->fasync(-1, file, 0); return df->disconnected_f_op->release(inode, file); + } panic("%s(%p, %p) failed!", __func__, inode, file); } diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index aef18682c035..a789efc9df39 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -2169,7 +2169,6 @@ static int snd_pcm_release(struct inode *inode, struct file *file) if (snd_BUG_ON(!substream)) return -ENXIO; pcm = substream->pcm; - fasync_helper(-1, file, 0, &substream->runtime->fasync); mutex_lock(&pcm->open_mutex); snd_pcm_release_substream(substream); kfree(pcm_file); diff --git a/sound/core/timer.c b/sound/core/timer.c index e582face89d2..c584408c9f17 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1263,7 +1263,6 @@ static int snd_timer_user_release(struct inode *inode, struct file *file) if (file->private_data) { tu = file->private_data; file->private_data = NULL; - fasync_helper(-1, file, 0, &tu->fasync); if (tu->timeri) snd_timer_close(tu->timeri); kfree(tu->queue); -- cgit v1.2.3 From 76f8bef0db031f03bf286c8bbccfaf83f0b22224 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Fri, 31 Oct 2008 22:50:04 +0800 Subject: remove unused #include 's The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/leds/leds-hp-disk.c drivers/misc/panasonic-laptop.c This patch removes the said #include . Signed-off-by: Huang Weiyi Signed-off-by: Linus Torvalds --- drivers/leds/leds-hp-disk.c | 1 - drivers/misc/panasonic-laptop.c | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/leds/leds-hp-disk.c b/drivers/leds/leds-hp-disk.c index 74645ab15660..44fa757d8254 100644 --- a/drivers/leds/leds-hp-disk.c +++ b/drivers/leds/leds-hp-disk.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include diff --git a/drivers/misc/panasonic-laptop.c b/drivers/misc/panasonic-laptop.c index a2cb598d8ab5..4a1bc64485d5 100644 --- a/drivers/misc/panasonic-laptop.c +++ b/drivers/misc/panasonic-laptop.c @@ -116,7 +116,6 @@ * */ -#include #include #include #include -- cgit v1.2.3 From 42c0202363194007a1ac377d047a95aa39246eb0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 1 Nov 2008 09:53:58 -0700 Subject: reserve_region_with_split: Fix GFP_KERNEL usage under spinlock This one apparently doesn't generate any warnings, because the function is only used during system bootup, when the warnings are disabled. But it's still very wrong. The __reserve_region_with_split() function is called with the resource_lock held for writing, so it must only ever do GFP_ATOMIC allocations. Signed-off-by: Linus Torvalds --- kernel/resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/resource.c b/kernel/resource.c index 6aac5c60b25d..4337063663ef 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -523,7 +523,7 @@ static void __init __reserve_region_with_split(struct resource *root, { struct resource *parent = root; struct resource *conflict; - struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL); + struct resource *res = kzalloc(sizeof(*res), GFP_ATOMIC); if (!res) return; -- cgit v1.2.3 From 1f98757776eafe31065be9118db6051afcf8643c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 1 Nov 2008 10:17:22 -0700 Subject: x86: Clean up late e820 resource allocation This makes the late e820 resources use 'insert_resource_expand_to_fit()' instead of doing a 'reserve_region_with_split()', and also avoids marking them as IORESOURCE_BUSY. This results in us being perfectly happy to use pre-existing PCI resources even if they were marked as being in a reserved region, while still avoiding any _new_ allocations in the reserved regions. It also makes for a simpler and more accurate resource tree. Example resource allocation from Jonathan Corbet, who has firmware that has an e820 reserved entry that covered a big range (e0000000-fed003ff), and that had various PCI resources in it set up by firmware. With old kernels, the reserved range would force us to re-allocate all pre-existing PCI resources, and his reserved range would end up looking like this: e0000000-fed003ff : reserved fec00000-fec00fff : IOAPIC 0 fed00000-fed003ff : HPET 0 where only the pre-allocated special regions (IOAPIC and HPET) were kept around. With 2.6.28-rc2, which uses 'reserve_region_with_split()', Jonathan's resource tree looked like this: e0000000-fe7fffff : reserved fe800000-fe8fffff : PCI Bus 0000:01 fe800000-fe8fffff : reserved fe900000-fe9d9aff : reserved fe9d9b00-fe9d9bff : 0000:00:1f.3 fe9d9b00-fe9d9bff : reserved fe9d9c00-fe9d9fff : 0000:00:1a.7 fe9d9c00-fe9d9fff : reserved fe9da000-fe9dafff : 0000:00:03.3 fe9da000-fe9dafff : reserved fe9db000-fe9dbfff : 0000:00:19.0 fe9db000-fe9dbfff : reserved fe9dc000-fe9dffff : 0000:00:1b.0 fe9dc000-fe9dffff : reserved fe9e0000-fe9fffff : 0000:00:19.0 fe9e0000-fe9fffff : reserved fea00000-fea7ffff : 0000:00:02.0 fea00000-fea7ffff : reserved fea80000-feafffff : 0000:00:02.1 fea80000-feafffff : reserved feb00000-febfffff : 0000:00:02.0 feb00000-febfffff : reserved fec00000-fed003ff : reserved fec00000-fec00fff : IOAPIC 0 fed00000-fed003ff : HPET 0 and because the reserved entry had been split and moved into the individual resources, and because it used the IORESOURCE_BUSY flag, the drivers that actually wanted to _use_ those resources couldn't actually attach to them: e1000e 0000:00:19.0: BAR 0: can't reserve mem region [0xfe9e0000-0xfe9fffff] HDA Intel 0000:00:1b.0: BAR 0: can't reserve mem region [0xfe9dc000-0xfe9dffff] with this patch, the resource tree instead becomes e0000000-fed003ff : reserved fe800000-fe8fffff : PCI Bus 0000:01 fe9d9b00-fe9d9bff : 0000:00:1f.3 fe9d9c00-fe9d9fff : 0000:00:1a.7 fe9d9c00-fe9d9fff : ehci_hcd fe9da000-fe9dafff : 0000:00:03.3 fe9db000-fe9dbfff : 0000:00:19.0 fe9db000-fe9dbfff : e1000e fe9dc000-fe9dffff : 0000:00:1b.0 fe9dc000-fe9dffff : ICH HD audio fe9e0000-fe9fffff : 0000:00:19.0 fe9e0000-fe9fffff : e1000e fea00000-fea7ffff : 0000:00:02.0 fea80000-feafffff : 0000:00:02.1 feb00000-febfffff : 0000:00:02.0 fec00000-fec00fff : IOAPIC 0 fed00000-fed003ff : HPET 0 ie the one reserved region now ends up surrounding all the PCI resources that were allocated inside of it by firmware, and because it is not marked BUSY, drivers have no problem attaching to the pre-allocated resources. Reported-and-tested-by: Jonathan Corbet Cc: Yinghai Lu Cc: Ingo Molnar Cc: Robert Hancock Signed-off-by: Linus Torvalds --- arch/x86/kernel/e820.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index ce97bf3bed12..7aafeb5263ef 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1290,15 +1290,17 @@ void __init e820_reserve_resources(void) res->start = e820.map[i].addr; res->end = end; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + res->flags = IORESOURCE_MEM; /* * don't register the region that could be conflicted with * pci device BAR resource and insert them later in * pcibios_resource_survey() */ - if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20)) + if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20)) { + res->flags |= IORESOURCE_BUSY; insert_resource(&iomem_resource, res); + } res++; } @@ -1318,7 +1320,7 @@ void __init e820_reserve_resources_late(void) res = e820_res; for (i = 0; i < e820.nr_map; i++) { if (!res->parent && res->end) - reserve_region_with_split(&iomem_resource, res->start, res->end, res->name); + insert_resource_expand_to_fit(&iomem_resource, res); res++; } } -- cgit v1.2.3 From d3f15800d5752ca4814270180798ab8323157d28 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Fri, 31 Oct 2008 12:47:23 +0800 Subject: init/do_mounts_md.c: remove duplicated #include Removed duplicated #include in init/do_mounts_md.c. The same compile error ("error: implicit declaration of function 'msleep'") got fixed twice: - f8b77d39397e1510b1a3bcfd385ebd1a45aae77f ("init/do_mounts_md.c: msleep compile fix") - 73b4a24f5ff09389ba6277c53a266b142f655ed2 ("init/do_mounts_md.c must #include ") by people adding the include in two slightly different places. Andrew's quilt scripts happily ignore the fuzz, and will re-apply the patch even though they had conflicts. Signed-off-by: Huang Weiyi Signed-off-by: Linus Torvalds --- init/do_mounts_md.c | 1 - 1 file changed, 1 deletion(-) diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c index 4d42f450b590..d6da5cdd3c38 100644 --- a/init/do_mounts_md.c +++ b/init/do_mounts_md.c @@ -1,6 +1,5 @@ #include #include -#include #include "do_mounts.h" -- cgit v1.2.3 From 4b30fbde910dd40b831528e916cb8a91823f618f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 1 Nov 2008 18:19:49 +0000 Subject: oss: fix O_NONBLOCK in dmasound_core We broke O_NONBLOCK handling in OSS dmasound_core in 2.3.11-pre3 - the original code copied f_flags to open_mode and then checked for O_NONBLOCK in there, but that got changed to copying f_mode and O_NONBLOCK has not reached that field in any kernel version. Since we do not care for any other bits, the fix is obvious... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- sound/oss/dmasound/dmasound.h | 2 +- sound/oss/dmasound/dmasound_core.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/oss/dmasound/dmasound.h b/sound/oss/dmasound/dmasound.h index 1cb13fe56ec4..1308d8d34186 100644 --- a/sound/oss/dmasound/dmasound.h +++ b/sound/oss/dmasound/dmasound.h @@ -235,7 +235,7 @@ struct sound_queue { */ int active; wait_queue_head_t action_queue, open_queue, sync_queue; - fmode_t open_mode; + int non_blocking; int busy, syncing, xruns, died; }; diff --git a/sound/oss/dmasound/dmasound_core.c b/sound/oss/dmasound/dmasound_core.c index b8239f3168fb..793b7f478433 100644 --- a/sound/oss/dmasound/dmasound_core.c +++ b/sound/oss/dmasound/dmasound_core.c @@ -603,7 +603,7 @@ static ssize_t sq_write(struct file *file, const char __user *src, size_t uLeft, while (uLeft) { while (write_sq.count >= write_sq.max_active) { sq_play(); - if (write_sq.open_mode & O_NONBLOCK) + if (write_sq.non_blocking) return uWritten > 0 ? uWritten : -EAGAIN; SLEEP(write_sq.action_queue); if (signal_pending(current)) @@ -718,7 +718,7 @@ static int sq_open2(struct sound_queue *sq, struct file *file, fmode_t mode, return rc; } - sq->open_mode = file->f_mode; + sq->non_blocking = file->f_flags & O_NONBLOCK; } return rc; } -- cgit v1.2.3 From 28959742c14918f153c1de641bb12b4ea44315a1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 1 Nov 2008 18:20:09 +0000 Subject: PM_TEST_SUSPEND should depend on RTC_CLASS, not RTC_LIB Insufficient dependency - we really want CONFIG_RTC_CLASS=y there. That will give us CONFIG_RTC_LIB=y, so the old dependency can be simply replaced. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- kernel/power/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index dcd165f92a88..23bd4daeb96b 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -96,7 +96,7 @@ config SUSPEND config PM_TEST_SUSPEND bool "Test suspend/resume and wakealarm during bootup" - depends on SUSPEND && PM_DEBUG && RTC_LIB=y + depends on SUSPEND && PM_DEBUG && RTC_CLASS=y ---help--- This option will let you suspend your machine during bootup, and make it wake up a few seconds later using an RTC wakeup alarm. -- cgit v1.2.3 From f5ee051e748ae007b972c7e1b6a0588b8ac9ba40 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 1 Nov 2008 18:20:39 +0000 Subject: section fixes for cirrusfb cirrusfb_zorro_unmap() may be called both from __devexit and (on cleanup path) from __devinit. So it needs to be a normal function, same as for cirrusfb_pci_unmap() Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/video/cirrusfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 048b139f0e50..8a8760230bc7 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -2049,7 +2049,7 @@ static void cirrusfb_pci_unmap(struct fb_info *info) #endif /* CONFIG_PCI */ #ifdef CONFIG_ZORRO -static void __devexit cirrusfb_zorro_unmap(struct fb_info *info) +static void cirrusfb_zorro_unmap(struct fb_info *info) { struct cirrusfb_info *cinfo = info->par; struct zorro_dev *zdev = to_zorro_dev(info->device); -- cgit v1.2.3 From 9ca68233f2ec12efc950b4d15e9a761308da2b3e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 1 Nov 2008 18:19:59 +0000 Subject: missing dependencies on HAVE_CLK in drivers/mfd Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/mfd/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b550267c8d5e..257277394f8c 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -81,7 +81,7 @@ config MFD_TMIO config MFD_T7L66XB bool "Support Toshiba T7L66XB" - depends on ARM + depends on ARM && HAVE_CLK select MFD_CORE select MFD_TMIO help @@ -89,7 +89,7 @@ config MFD_T7L66XB config MFD_TC6387XB bool "Support Toshiba TC6387XB" - depends on ARM + depends on ARM && HAVE_CLK select MFD_CORE select MFD_TMIO help -- cgit v1.2.3 From 37b2a1791c8b8d630944afbe0745a08c8e8ae091 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 1 Nov 2008 18:20:19 +0000 Subject: el3_common_init() should be __devinit, not __init Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/3c509.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 3a7bc524af33..c7a4f3bcc2bc 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -94,7 +94,7 @@ #include #include -static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; +static char version[] __devinitdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; #ifdef EL3_DEBUG static int el3_debug = EL3_DEBUG; @@ -186,7 +186,7 @@ static int max_interrupt_work = 10; static int nopnp; #endif -static int __init el3_common_init(struct net_device *dev); +static int __devinit el3_common_init(struct net_device *dev); static void el3_common_remove(struct net_device *dev); static ushort id_read_eeprom(int index); static ushort read_eeprom(int ioaddr, int index); @@ -537,7 +537,7 @@ static struct mca_driver el3_mca_driver = { static int mca_registered; #endif /* CONFIG_MCA */ -static int __init el3_common_init(struct net_device *dev) +static int __devinit el3_common_init(struct net_device *dev) { struct el3_private *lp = netdev_priv(dev); int err; -- cgit v1.2.3 From c10555faca342820d861e80ca2e1edcf2114f751 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 1 Nov 2008 18:20:29 +0000 Subject: sparc32: kernel/trace/trace.c wants DIE_OOPS Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc/include/asm/kdebug_32.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sparc/include/asm/kdebug_32.h b/arch/sparc/include/asm/kdebug_32.h index f69fe7d84b3c..1d0b240222ef 100644 --- a/arch/sparc/include/asm/kdebug_32.h +++ b/arch/sparc/include/asm/kdebug_32.h @@ -60,6 +60,7 @@ static inline void sp_enter_debugger(void) enum die_val { DIE_UNUSED, + DIE_OOPS, }; #endif /* !(__ASSEMBLY__) */ -- cgit v1.2.3 From af2b0a1ec37c61513d83d2d123658b4ef69d2ce9 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Sat, 1 Nov 2008 12:55:37 -0700 Subject: RDMA/cxgb3: Fix too-big reserved field zeroing in iwch_post_zb_read() The array wqe->read.reserved has only two entries, but iwch_post_zb_read() sets [0], [1], and [2], which is one too many. This is harmless since it runs into the next field, rem_stag, which is initialized correctly immediately after, but we might as well get things right, especially since it makes the code smaller. This was spotted by the Coverity checker (CID 2475). Signed-off-by: Roland Dreier Acked-by: Steve Wise --- drivers/infiniband/hw/cxgb3/iwch_qp.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 3e4585c2318a..19661b2f0406 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -745,7 +745,6 @@ int iwch_post_zb_read(struct iwch_qp *qhp) wqe->read.rdmaop = T3_READ_REQ; wqe->read.reserved[0] = 0; wqe->read.reserved[1] = 0; - wqe->read.reserved[2] = 0; wqe->read.rem_stag = cpu_to_be32(1); wqe->read.rem_to = cpu_to_be64(1); wqe->read.local_stag = cpu_to_be32(1); -- cgit v1.2.3 From 60df3de8b1f5ce085049e9e3c83d96643c426158 Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Thu, 30 Oct 2008 13:02:54 +0200 Subject: pcmcia: fix indentation & braces disagreement - add braces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Broken by d8b0a49da4f2 (pcmcia: deprecate CS_BAD_VCC and CS_BAD_VPP). Signed-off-by: Ilpo Järvinen Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pcmcia_resource.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 76d4a98f0955..f5d0ba8e22d5 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -302,9 +302,10 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev, /* We only allow changing Vpp1 and Vpp2 to the same value */ if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - if (mod->Vpp1 != mod->Vpp2) + if (mod->Vpp1 != mod->Vpp2) { ds_dbg(s, 0, "Vpp1 and Vpp2 must be the same\n"); return -EINVAL; + } s->socket.Vpp = mod->Vpp1; if (s->ops->set_socket(s, &s->socket)) { dev_printk(KERN_WARNING, &s->dev, -- cgit v1.2.3 From d1a203eac0ec13cd1c0ba610fe7a55c9bc40473b Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sat, 1 Nov 2008 21:01:09 -0700 Subject: net: add documentation for skb recycling Commit 04a4bb55bcf35b63d40fd2725e58599ff8310dd7 ("net: add skb_recycle_check() to enable netdriver skb recycling") added a method for network drivers to recycle skbuffs, but while use of this mechanism was documented in the commit message, it should really have been added as a docbook comment as well -- this patch does that. Signed-off-by: Stephen Hemminger Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- net/core/skbuff.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 4e22e3a35359..ebb6b94f8af2 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -449,6 +449,18 @@ void kfree_skb(struct sk_buff *skb) __kfree_skb(skb); } +/** + * skb_recycle_check - check if skb can be reused for receive + * @skb: buffer + * @skb_size: minimum receive buffer size + * + * Checks that the skb passed in is not shared or cloned, and + * that it is linear and its head portion at least as large as + * skb_size so that it can be recycled as a receive buffer. + * If these conditions are met, this function does any necessary + * reference count dropping and cleans up the skbuff as if it + * just came from __alloc_skb(). + */ int skb_recycle_check(struct sk_buff *skb, int skb_size) { struct skb_shared_info *shinfo; -- cgit v1.2.3 From 920a46115ca3fa88990276d98520abab85495b2d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 1 Nov 2008 21:22:23 -0700 Subject: udp: multicast packets need to check namespace Current UDP multicast delivery is not namespace aware. Signed-off-by: Eric Dumazet Acked-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/ipv4/udp.c | 12 +++++++----- net/ipv6/udp.c | 8 ++++---- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 2095abc3caba..cf02701ced48 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -284,7 +284,7 @@ struct sock *udp4_lib_lookup(struct net *net, __be32 saddr, __be16 sport, } EXPORT_SYMBOL_GPL(udp4_lib_lookup); -static inline struct sock *udp_v4_mcast_next(struct sock *sk, +static inline struct sock *udp_v4_mcast_next(struct net *net, struct sock *sk, __be16 loc_port, __be32 loc_addr, __be16 rmt_port, __be32 rmt_addr, int dif) @@ -296,7 +296,8 @@ static inline struct sock *udp_v4_mcast_next(struct sock *sk, sk_for_each_from(s, node) { struct inet_sock *inet = inet_sk(s); - if (s->sk_hash != hnum || + if (!net_eq(sock_net(s), net) || + s->sk_hash != hnum || (inet->daddr && inet->daddr != rmt_addr) || (inet->dport != rmt_port && inet->dport) || (inet->rcv_saddr && inet->rcv_saddr != loc_addr) || @@ -1079,15 +1080,16 @@ static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb, read_lock(&udp_hash_lock); sk = sk_head(&udptable[udp_hashfn(net, ntohs(uh->dest))]); dif = skb->dev->ifindex; - sk = udp_v4_mcast_next(sk, uh->dest, daddr, uh->source, saddr, dif); + sk = udp_v4_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif); if (sk) { struct sock *sknext = NULL; do { struct sk_buff *skb1 = skb; - sknext = udp_v4_mcast_next(sk_next(sk), uh->dest, daddr, - uh->source, saddr, dif); + sknext = udp_v4_mcast_next(net, sk_next(sk), uh->dest, + daddr, uh->source, saddr, + dif); if (sknext) skb1 = skb_clone(skb, GFP_ATOMIC); diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index e51da8c092fa..71e259e866a1 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -328,7 +328,7 @@ drop: return -1; } -static struct sock *udp_v6_mcast_next(struct sock *sk, +static struct sock *udp_v6_mcast_next(struct net *net, struct sock *sk, __be16 loc_port, struct in6_addr *loc_addr, __be16 rmt_port, struct in6_addr *rmt_addr, int dif) @@ -340,7 +340,7 @@ static struct sock *udp_v6_mcast_next(struct sock *sk, sk_for_each_from(s, node) { struct inet_sock *inet = inet_sk(s); - if (sock_net(s) != sock_net(sk)) + if (!net_eq(sock_net(s), net)) continue; if (s->sk_hash == num && s->sk_family == PF_INET6) { @@ -383,14 +383,14 @@ static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb, read_lock(&udp_hash_lock); sk = sk_head(&udptable[udp_hashfn(net, ntohs(uh->dest))]); dif = inet6_iif(skb); - sk = udp_v6_mcast_next(sk, uh->dest, daddr, uh->source, saddr, dif); + sk = udp_v6_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif); if (!sk) { kfree_skb(skb); goto out; } sk2 = sk; - while ((sk2 = udp_v6_mcast_next(sk_next(sk2), uh->dest, daddr, + while ((sk2 = udp_v6_mcast_next(net, sk_next(sk2), uh->dest, daddr, uh->source, saddr, dif))) { struct sk_buff *buff = skb_clone(skb, GFP_ATOMIC); if (buff) { -- cgit v1.2.3 From abdd5a0301a6306d6465ceca9de8e732b2fedaa5 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 1 Nov 2008 21:30:50 -0700 Subject: IRDA: remove double inclusion of module.h Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/net/irda/ks959-sir.c | 1 - drivers/net/irda/ksdazzle-sir.c | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c index 2482d61662a2..2e67ae015d91 100644 --- a/drivers/net/irda/ks959-sir.c +++ b/drivers/net/irda/ks959-sir.c @@ -118,7 +118,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c index 1e0de93fd618..3843b5faba8b 100644 --- a/drivers/net/irda/ksdazzle-sir.c +++ b/drivers/net/irda/ksdazzle-sir.c @@ -82,7 +82,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 48dcc33e5e11de0f76b65b113988dbc930d17395 Mon Sep 17 00:00:00 2001 From: Jianjun Kong Date: Sat, 1 Nov 2008 21:37:27 -0700 Subject: af_unix: netns: fix problem of return value fix problem of return value net/unix/af_unix.c: unix_net_init() when error appears, it should return 'error', not always return 0. Signed-off-by: Jianjun Kong Signed-off-by: David S. Miller --- net/unix/af_unix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index dc504d308ec0..4d3c6071b9a4 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2213,7 +2213,7 @@ static int unix_net_init(struct net *net) #endif error = 0; out: - return 0; + return error; } static void unix_net_exit(struct net *net) -- cgit v1.2.3 From 145e1c0023585e0e8f6df22316308ec61c5066b2 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sat, 1 Nov 2008 21:41:40 -0700 Subject: sparc64: Fix __copy_{to,from}_user_inatomic defines. Alexander Beregalov reports oops in __bzero() called from copy_from_user_fixup() called from iov_iter_copy_from_user_atomic(), when running dbench on tmpfs on sparc64: its __copy_from_user_inatomic and __copy_to_user_inatomic should be avoiding, not calling, the fixups. Signed-off-by: Hugh Dickins Signed-off-by: David S. Miller --- arch/sparc/include/asm/uaccess_64.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h index 296ef30e05c8..c64e767a3e4b 100644 --- a/arch/sparc/include/asm/uaccess_64.h +++ b/arch/sparc/include/asm/uaccess_64.h @@ -265,8 +265,8 @@ extern long __strnlen_user(const char __user *, long len); #define strlen_user __strlen_user #define strnlen_user __strnlen_user -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user +#define __copy_to_user_inatomic ___copy_to_user +#define __copy_from_user_inatomic ___copy_from_user #endif /* __ASSEMBLY__ */ -- cgit v1.2.3 From e68f0aee89ebb93aaeedf064e0291d3c19520f7e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 1 Nov 2008 21:44:01 -0700 Subject: sparc32: kernel/trace/trace.c wants DIE_OOPS Signed-off-by: Al Viro Signed-off-by: David S. Miller --- arch/sparc/include/asm/kdebug_32.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sparc/include/asm/kdebug_32.h b/arch/sparc/include/asm/kdebug_32.h index f69fe7d84b3c..1d0b240222ef 100644 --- a/arch/sparc/include/asm/kdebug_32.h +++ b/arch/sparc/include/asm/kdebug_32.h @@ -60,6 +60,7 @@ static inline void sp_enter_debugger(void) enum die_val { DIE_UNUSED, + DIE_OOPS, }; #endif /* !(__ASSEMBLY__) */ -- cgit v1.2.3 From a1995a6599044076e2e13512ffbcecc49865e63e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 2 Nov 2008 00:15:38 -0700 Subject: sparc64: Kill annoying warning when building compat_binfmt_elf.o GCC warns because some tests against 32-bit values never evaluate to true due to how TASK_SIZE is defined. I always wanted to mimick powerpc's definition of TASK_SIZE, which is simply TASK_SIZE_OF(current) and that also fixes the warning. Signed-off-by: David S. Miller --- arch/sparc/include/asm/processor_64.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h index 137a6bd72fc8..59fcebb8f440 100644 --- a/arch/sparc/include/asm/processor_64.h +++ b/arch/sparc/include/asm/processor_64.h @@ -36,10 +36,10 @@ #define VPTE_SIZE (1 << (VA_BITS - PAGE_SHIFT + 3)) #endif -#define TASK_SIZE ((unsigned long)-VPTE_SIZE) #define TASK_SIZE_OF(tsk) \ (test_tsk_thread_flag(tsk,TIF_32BIT) ? \ - (1UL << 32UL) : TASK_SIZE) + (1UL << 32UL) : ((unsigned long)-VPTE_SIZE)) +#define TASK_SIZE TASK_SIZE_OF(current) #ifdef __KERNEL__ #define STACK_TOP32 ((1UL << 32UL) - PAGE_SIZE) -- cgit v1.2.3 From 5769907ade8dda7002b304c03ef9e4ee5c1e0821 Mon Sep 17 00:00:00 2001 From: Max Dmitrichenko Date: Sun, 2 Nov 2008 00:34:10 -0700 Subject: sparc64: Fix PCI resource mapping on sparc64 There is a problem discovered in recent versions of ATI Mach64 driver in X.org on sparc64 architecture. In short, the driver fails to mmap MMIO aperture (PCI resource #2). I've found that kernel's __pci_mmap_make_offset() returns EINVAL. It checks whether user attempts to mmap more than the resource length, which is 0x1000 bytes in our case. But PAGE_SIZE on SPARC64 is 0x2000 and this is what actually is being mmaped. So __pci_mmap_make_offset() failed for this PCI resource. Signed-off-by: Max Dmitrichenko Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 242ac1ccae7d..bdb7c0a6d83d 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -889,6 +889,7 @@ static int __pci_mmap_make_offset(struct pci_dev *pdev, for (i = 0; i <= PCI_ROM_RESOURCE; i++) { struct resource *rp = &pdev->resource[i]; + resource_size_t aligned_end; /* Active? */ if (!rp->flags) @@ -906,8 +907,15 @@ static int __pci_mmap_make_offset(struct pci_dev *pdev, continue; } + /* Align the resource end to the next page address. + * PAGE_SIZE intentionally added instead of (PAGE_SIZE - 1), + * because actually we need the address of the next byte + * after rp->end. + */ + aligned_end = (rp->end + PAGE_SIZE) & PAGE_MASK; + if ((rp->start <= user_paddr) && - (user_paddr + user_size) <= (rp->end + 1UL)) + (user_paddr + user_size) <= aligned_end) break; } -- cgit v1.2.3 From 3e879f61434632ca099804713099f8f1627f929e Mon Sep 17 00:00:00 2001 From: Komuro Date: Sun, 2 Nov 2008 19:33:24 +0900 Subject: pcmcia: setup resource information for pseudo multifunction devices. Setup "io" and "irq" for pseudo multifunction devices. Signed-off-by: Komuro Signed-off-by: Dominik Brodowski --- drivers/pcmcia/ds.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 795660255490..00eee1435dca 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -668,6 +668,8 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f list_for_each_entry(tmp_dev, &s->devices_list, socket_device_list) if (p_dev->func == tmp_dev->func) { p_dev->function_config = tmp_dev->function_config; + p_dev->io = tmp_dev->io; + p_dev->irq = tmp_dev->irq; kref_get(&p_dev->function_config->ref); } -- cgit v1.2.3 From 70d9d15833864e7120c3ffcfdbd6fa61f5f9726a Mon Sep 17 00:00:00 2001 From: Will Newton Date: Tue, 28 Oct 2008 10:52:36 +0000 Subject: drivers/net/smc911x.c: Fix lockdep warning on xmit. dev_kfree_skb should not be called with irqs disabled, use dev_kfree_skb_irq instead. The warning caused looks like this: ====================================================== [ INFO: hard-safe -> hard-unsafe lock order detected ] 2.6.28-rc1 #273 ------------------------------------------------------ swapper/0 [HC0[0]:SC1[2]:HE0:SE0] is trying to acquire: (clock-AF_INET){-..+}, at: [<4015c17c>] _sock_def_write_space+0x28/0xd8 and this task is already holding: (&lp->lock){++..}, at: [<4013f230>] _smc911x_hard_start_xmit+0x30/0x4b8 which would create a new lock dependency: (&lp->lock){++..} -> (clock-AF_INET){-..+} Signed-off-by: Will Newton Signed-off-by: Jeff Garzik --- drivers/net/smc911x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index f59c7772f344..5051554ff05b 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -499,7 +499,7 @@ static void smc911x_hardware_send_pkt(struct net_device *dev) #else SMC_PUSH_DATA(lp, buf, len); dev->trans_start = jiffies; - dev_kfree_skb(skb); + dev_kfree_skb_irq(skb); #endif if (!lp->tx_throttle) { netif_wake_queue(dev); -- cgit v1.2.3 From 2509698687e2d8265a19d800f7daa6f87790a529 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 1 Nov 2008 11:46:06 +0100 Subject: pcmcia: struct device - replace bus_id with dev_name(), dev_set_name() Signed-Off-By: Kay Sievers Acked-by: Greg Kroah-Hartman Signed-off-by: Dominik Brodowski --- drivers/pcmcia/cs.c | 2 +- drivers/pcmcia/ds.c | 9 ++++----- drivers/pcmcia/rsrc_nonstatic.c | 6 +++--- 3 files changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index c68c5d338285..5d0e60e09d31 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -226,7 +226,7 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) /* set proper values in socket->dev */ dev_set_drvdata(&socket->dev, socket); socket->dev.class = &pcmcia_socket_class; - snprintf(socket->dev.bus_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock); + dev_set_name(&socket->dev, "pcmcia_socket%u", socket->sock); /* base address = 0, map = 0 */ socket->cis_mem.flags = 0; diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 00eee1435dca..47cab31ff6e4 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -622,7 +622,6 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f { struct pcmcia_device *p_dev, *tmp_dev; unsigned long flags; - int bus_id_len; s = pcmcia_get_socket(s); if (!s) @@ -650,12 +649,12 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f /* by default don't allow DMA */ p_dev->dma_mask = DMA_MASK_NONE; p_dev->dev.dma_mask = &p_dev->dma_mask; - bus_id_len = sprintf (p_dev->dev.bus_id, "%d.%d", p_dev->socket->sock, p_dev->device_no); - - p_dev->devname = kmalloc(6 + bus_id_len + 1, GFP_KERNEL); + dev_set_name(&p_dev->dev, "%d.%d", p_dev->socket->sock, p_dev->device_no); + if (!dev_name(&p_dev->dev)) + goto err_free; + p_dev->devname = kasprintf(GFP_KERNEL, "pcmcia%s", dev_name(&p_dev->dev)); if (!p_dev->devname) goto err_free; - sprintf (p_dev->devname, "pcmcia%s", p_dev->dev.bus_id); ds_dev_dbg(3, &p_dev->dev, "devname is %s\n", p_dev->devname); spin_lock_irqsave(&pcmcia_dev_list_lock, flags); diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 17f4ecf1c0c5..9ca22c7aafb2 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -71,7 +71,7 @@ static DEFINE_MUTEX(rsrc_mutex); ======================================================================*/ static struct resource * -make_resource(resource_size_t b, resource_size_t n, int flags, char *name) +make_resource(resource_size_t b, resource_size_t n, int flags, const char *name) { struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL); @@ -624,7 +624,7 @@ static int nonstatic_adjust_io_region(struct resource *res, unsigned long r_star static struct resource *nonstatic_find_io_region(unsigned long base, int num, unsigned long align, struct pcmcia_socket *s) { - struct resource *res = make_resource(0, num, IORESOURCE_IO, s->dev.bus_id); + struct resource *res = make_resource(0, num, IORESOURCE_IO, dev_name(&s->dev)); struct socket_data *s_data = s->resource_data; struct pcmcia_align_data data; unsigned long min = base; @@ -658,7 +658,7 @@ static struct resource *nonstatic_find_io_region(unsigned long base, int num, static struct resource * nonstatic_find_mem_region(u_long base, u_long num, u_long align, int low, struct pcmcia_socket *s) { - struct resource *res = make_resource(0, num, IORESOURCE_MEM, s->dev.bus_id); + struct resource *res = make_resource(0, num, IORESOURCE_MEM, dev_name(&s->dev)); struct socket_data *s_data = s->resource_data; struct pcmcia_align_data data; unsigned long min, max; -- cgit v1.2.3 From 4ac96572f1f6abe44b5e02e80fdfb5a990129613 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 2 Nov 2008 09:51:27 -0500 Subject: linux/string.h: fix comment typo s/user/used/ Signed-off-by: Jeff Garzik Signed-off-by: Linus Torvalds --- include/linux/string.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/string.h b/include/linux/string.h index 810d80df0a1d..d18fc198aa2f 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -1,7 +1,7 @@ #ifndef _LINUX_STRING_H_ #define _LINUX_STRING_H_ -/* We don't want strings.h stuff being user by user stuff by accident */ +/* We don't want strings.h stuff being used by user stuff by accident */ #ifndef __KERNEL__ #include -- cgit v1.2.3 From e689597fe890cf22e23195037aa668c39b25ae4b Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 2 Nov 2008 19:55:45 +0100 Subject: pcmcia: add braces in error path Signed-off-by: Dominik Brodowski --- drivers/pcmcia/cistpl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index dcce9f5d8465..4a110b7b2673 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -351,10 +351,11 @@ int verify_cis_cache(struct pcmcia_socket *s) char *buf; buf = kmalloc(256, GFP_KERNEL); - if (buf == NULL) + if (buf == NULL) { dev_printk(KERN_WARNING, &s->dev, "no memory for verifying CIS\n"); return -ENOMEM; + } list_for_each_entry(cis, &s->cis_cache, node) { int len = cis->len; -- cgit v1.2.3 From 9bd27cba1aeacb6b12d05f4e5ed6361072f08fe0 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 2 Nov 2008 21:40:07 +0100 Subject: ide-cd: fix DMA alignment regression e5318b531b008c79d2a0c0df06a7b8628da38e2f ("ide: use the dma safe check for REQ_TYPE_ATA_PC") introduced a regression which caused some ATAPI drives to turn off DMA for REQ_TYPE_BLOCK_PC commands while burning and thus degrading performance and ultimately causing an excessive amount of underruns. The issue is documented also in: http://bugzilla.kernel.org/show_bug.cgi?id=11742. Signed-off-by: Borislav Petkov Cc: FUJITA Tomonori Tested-by: Valerio Passini [bart: fixup patch description per comments from Sergei Shtylyov] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 48b5eda3ab41..42ab6d8715f2 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1250,7 +1250,8 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) * separate masks. */ alignment = queue_dma_alignment(q) | q->dma_pad_mask; - if ((unsigned long)buf & alignment || rq->data_len & alignment + if ((unsigned long)buf & alignment + || rq->data_len & q->dma_pad_mask || object_is_on_stack(buf)) drive->dma = 0; } -- cgit v1.2.3 From ccd32e221c3e3797ac56305c554ad8b07c13c815 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sun, 2 Nov 2008 21:40:08 +0100 Subject: ide: Switch to a common address Signed-off-by: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/alim15x3.c | 2 +- drivers/ide/hpt366.c | 2 +- drivers/ide/ide-disk.c | 2 +- drivers/ide/ide-iops.c | 2 +- drivers/ide/ide-pci-generic.c | 2 +- drivers/ide/ide-proc.c | 2 +- drivers/ide/it821x.c | 2 +- drivers/ide/jmicron.c | 2 +- drivers/ide/piix.c | 2 +- drivers/ide/scc_pata.c | 2 +- drivers/ide/siimage.c | 2 +- 11 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index daf9dce39e52..e56c7b72f9e2 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -5,7 +5,7 @@ * * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) * May be copied or modified under the terms of the GNU General Public License - * Copyright (C) 2002 Alan Cox + * Copyright (C) 2002 Alan Cox * ALi (now ULi M5228) support by Clear Zhang * Copyright (C) 2007 MontaVista Software, Inc. * Copyright (C) 2007 Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index a7909e9c720e..f5afd46ed51c 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -52,7 +52,7 @@ * different clocks on read/write. This requires overloading rw_disk and * other deeply crazy things. Thanks to for * keeping me sane. - * Alan Cox + * Alan Cox * * - fix the clock turnaround code: it was writing to the wrong ports when * called for the secondary channel, caching the current clock mode per- diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index e5adebe8ac2c..eb9fac4d0f0c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -2,7 +2,7 @@ * Copyright (C) 1994-1998 Linus Torvalds & authors (see below) * Copyright (C) 1998-2002 Linux ATA Development * Andre Hedrick - * Copyright (C) 2003 Red Hat + * Copyright (C) 2003 Red Hat * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz */ diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index bb7a1ed8094e..5d6ba14e211d 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2000-2002 Andre Hedrick - * Copyright (C) 2003 Red Hat + * Copyright (C) 2003 Red Hat * */ diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index 474f96a7c076..bddae2b329a0 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2001-2002 Andre Hedrick - * Portions (C) Copyright 2002 Red Hat Inc + * Portions (C) Copyright 2002 Red Hat Inc * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index c31d0dd7a532..f3cddd1b2f8f 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -1,6 +1,6 @@ /* * Copyright (C) 1997-1998 Mark Lord - * Copyright (C) 2003 Red Hat + * Copyright (C) 2003 Red Hat * * Some code was moved here from ide.c, see it for original copyrights. */ diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index 995e18bb3139..ef004089761b 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004 Red Hat + * Copyright (C) 2004 Red Hat * Copyright (C) 2007 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public License diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c index 9a68433cf46d..bf2be6431b20 100644 --- a/drivers/ide/jmicron.c +++ b/drivers/ide/jmicron.c @@ -1,6 +1,6 @@ /* - * Copyright (C) 2006 Red Hat + * Copyright (C) 2006 Red Hat * * May be copied or modified under the terms of the GNU General Public License */ diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index d63f9fdca76b..61d2d920a5cd 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick - * Copyright (C) 2003 Red Hat Inc + * Copyright (C) 2003 Red Hat * Copyright (C) 2006-2007 MontaVista Software, Inc. * * May be copied or modified under the terms of the GNU General Public License diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index f26aa5d54efb..0f48f9dacfa5 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -5,7 +5,7 @@ * * This code is based on drivers/ide/pci/siimage.c: * Copyright (C) 2001-2002 Andre Hedrick - * Copyright (C) 2003 Red Hat + * Copyright (C) 2003 Red Hat * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c index c3107df7773d..7d622d20bc4c 100644 --- a/drivers/ide/siimage.c +++ b/drivers/ide/siimage.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2001-2002 Andre Hedrick - * Copyright (C) 2003 Red Hat + * Copyright (C) 2003 Red Hat * Copyright (C) 2007-2008 MontaVista Software, Inc. * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz * -- cgit v1.2.3 From 630a8b2500c8d04e87e597c4afa5e1fafff04591 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 2 Nov 2008 21:40:09 +0100 Subject: tx4938ide: Check minimum cycle time and SHWT range (v2) SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx release to address invalid hold time, so it actualy applies 4 times and so constitutes -DIOx recovery time. Check requirement of the recovery time and cycle time. Also check SHWT maximum value. Suggested-by: Sergei Shtylyov Signed-off-by: Atsushi Nemoto Cc: ralf@linux-mips.org Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/tx4938ide.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index fa660f931a11..9c518e722707 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -39,10 +39,17 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch, /* Address-valid to DIOR/DIOW setup */ shwt = DIV_ROUND_UP(t->setup, cycle); + /* -DIOx recovery time (SHWT * 4) and cycle time requirement */ + while ((shwt * 4 + wt + (wt ? 2 : 3)) * cycle < t->cycle) + shwt++; + if (shwt > 7) { + pr_warning("tx4938ide: SHWT violation (%d)\n", shwt); + shwt = 7; + } pr_debug("tx4938ide: ebus %d, bus cycle %dns, WT %d, SHWT %d\n", ebus_ch, cycle, wt, shwt); - __raw_writeq((cr & ~(0x3f007ull)) | (wt << 12) | shwt, + __raw_writeq((cr & ~0x3f007ull) | (wt << 12) | shwt, &tx4938_ebuscptr->cr[ebus_ch]); } -- cgit v1.2.3 From 9d4eb0a33e620a85e36f66cf895d2bea6d556eac Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 2 Nov 2008 21:40:09 +0100 Subject: tx4938ide: Do not call devm_ioremap for whole 128KB Call devm_ioremap() for CS0 and CS1 separetely. And some style cleanups. Suggested-by: Sergei Shtylyov Signed-off-by: Atsushi Nemoto Cc: ralf@linux-mips.org Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/tx4938ide.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index 9c518e722707..796289cf97e0 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -235,7 +235,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev) struct resource *res; struct tx4938ide_platform_info *pdata = pdev->dev.platform_data; int irq, ret, i; - unsigned long mapbase; + unsigned long mapbase, mapctl; struct ide_port_info d = tx4938ide_port_info; irq = platform_get_irq(pdev, 0); @@ -249,38 +249,43 @@ static int __init tx4938ide_probe(struct platform_device *pdev) res->end - res->start + 1, "tx4938ide")) return -EBUSY; mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start, - res->end - res->start + 1); - if (!mapbase) + 8 << pdata->ioport_shift); + mapctl = (unsigned long)devm_ioremap(&pdev->dev, + res->start + 0x10000 + + (6 << pdata->ioport_shift), + 1 << pdata->ioport_shift); + if (!mapbase || !mapctl) return -EBUSY; memset(&hw, 0, sizeof(hw)); if (pdata->ioport_shift) { unsigned long port = mapbase; + unsigned long ctl = mapctl; hw.io_ports_array[0] = port; #ifdef __BIG_ENDIAN port++; + ctl++; #endif for (i = 1; i <= 7; i++) hw.io_ports_array[i] = port + (i << pdata->ioport_shift); - hw.io_ports.ctl_addr = - port + 0x10000 + (6 << pdata->ioport_shift); + hw.io_ports.ctl_addr = ctl; } else - ide_std_init_ports(&hw, mapbase, mapbase + 0x10006); + ide_std_init_ports(&hw, mapbase, mapctl); hw.irq = irq; hw.dev = &pdev->dev; - pr_info("TX4938 IDE interface (base %#lx, irq %d)\n", mapbase, hw.irq); + pr_info("TX4938 IDE interface (base %#lx, ctl %#lx, irq %d)\n", + mapbase, mapctl, hw.irq); if (pdata->gbus_clock) tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0); else d.port_ops = NULL; ret = ide_host_add(&d, hws, &host); - if (ret) - return ret; - platform_set_drvdata(pdev, host); - return 0; + if (!ret) + platform_set_drvdata(pdev, host); + return ret; } static int __exit tx4938ide_remove(struct platform_device *pdev) -- cgit v1.2.3 From 7afa05350c42d8427f2d8f6112b64ab0812f3289 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 2 Nov 2008 21:40:10 +0100 Subject: tx4938ide: Avoid underflow on calculation of a wait cycle Make 'wt' variable signed while it can be negative during calculation. Suggested-by: Sergei Shtylyov Signed-off-by: Atsushi Nemoto Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/tx4938ide.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index 796289cf97e0..9120063e8f87 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -26,12 +26,13 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch, unsigned int sp = (cr >> 4) & 3; unsigned int clock = gbus_clock / (4 - sp); unsigned int cycle = 1000000000 / clock; - unsigned int wt, shwt; + unsigned int shwt; + int wt; /* Minimum DIOx- active time */ wt = DIV_ROUND_UP(t->act8b, cycle) - 2; /* IORDY setup time: 35ns */ - wt = max(wt, DIV_ROUND_UP(35, cycle)); + wt = max_t(int, wt, DIV_ROUND_UP(35, cycle)); /* actual wait-cycle is max(wt & ~1, 1) */ if (wt > 2 && (wt & 1)) wt++; -- cgit v1.2.3 From 52ebb438e952c674e5a5c131292589db9bcf169b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 2 Nov 2008 21:40:10 +0100 Subject: ide-gd: re-get capacity on revalidate We need to re-get a removable media's capacity when revalidating the disk so that its partitions get rescanned by the block layer. Signed-off-by: Borislav Petkov Cc: Tejun Heo Cc: axboe@kernel.dk Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-gd.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 7b6662854374..b8078b3231f7 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -281,7 +281,12 @@ static int ide_gd_media_changed(struct gendisk *disk) static int ide_gd_revalidate_disk(struct gendisk *disk) { struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); - set_capacity(disk, ide_gd_capacity(idkp->drive)); + ide_drive_t *drive = idkp->drive; + + if (ide_gd_media_changed(disk)) + drive->disk_ops->get_capacity(drive); + + set_capacity(disk, ide_gd_capacity(drive)); return 0; } -- cgit v1.2.3 From 45beca08dd8b6d6a65c5ffd730af2eac7a2c7a03 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 2 Nov 2008 14:17:19 -0800 Subject: Linux v2.6.28-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index d50081751e02..29abe62ccbad 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Killer Bat of Doom # *DOCUMENTATION* -- cgit v1.2.3 From e219cca082f52e7dfea41f3be264b7b5eb204227 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 6 Nov 2008 22:37:59 -0500 Subject: jbd: don't give up looking for space so easily in __log_wait_for_space Commit be07c4ed introducd a regression because it assumed that if there were no transactions ready to be checkpointed, that no progress could be made on making space available in the journal, and so the journal should be aborted. This assumption is false; it could be the case that simply calling cleanup_journal_tail() will recover the necessary space, or, for small journals, the currently committing transaction could be responsible for chewing up the required space in the log, so we need to wait for the currently committing transaction to finish before trying to force a checkpoint operation. This patch fixes the bug reported by Meelis Roos at: http://bugzilla.kernel.org/show_bug.cgi?id=11937 Signed-off-by: "Theodore Ts'o" Cc: Duane Griffin Cc: Toshiyuki Okajima --- fs/jbd/checkpoint.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c index 1bd8d4acc6f2..61f32f3868cd 100644 --- a/fs/jbd/checkpoint.c +++ b/fs/jbd/checkpoint.c @@ -115,7 +115,7 @@ static int __try_to_free_cp_buf(struct journal_head *jh) */ void __log_wait_for_space(journal_t *journal) { - int nblocks; + int nblocks, space_left; assert_spin_locked(&journal->j_state_lock); nblocks = jbd_space_needed(journal); @@ -128,25 +128,42 @@ void __log_wait_for_space(journal_t *journal) /* * Test again, another process may have checkpointed while we * were waiting for the checkpoint lock. If there are no - * outstanding transactions there is nothing to checkpoint and - * we can't make progress. Abort the journal in this case. + * transactions ready to be checkpointed, try to recover + * journal space by calling cleanup_journal_tail(), and if + * that doesn't work, by waiting for the currently committing + * transaction to complete. If there is absolutely no way + * to make progress, this is either a BUG or corrupted + * filesystem, so abort the journal and leave a stack + * trace for forensic evidence. */ spin_lock(&journal->j_state_lock); spin_lock(&journal->j_list_lock); nblocks = jbd_space_needed(journal); - if (__log_space_left(journal) < nblocks) { + space_left = __log_space_left(journal); + if (space_left < nblocks) { int chkpt = journal->j_checkpoint_transactions != NULL; + tid_t tid = 0; + if (journal->j_committing_transaction) + tid = journal->j_committing_transaction->t_tid; spin_unlock(&journal->j_list_lock); spin_unlock(&journal->j_state_lock); if (chkpt) { log_do_checkpoint(journal); + } else if (cleanup_journal_tail(journal) == 0) { + /* We were able to recover space; yay! */ + ; + } else if (tid) { + log_wait_commit(journal, tid); } else { - printk(KERN_ERR "%s: no transactions\n", - __func__); + printk(KERN_ERR "%s: needed %d blocks and " + "only had %d space available\n", + __func__, nblocks, space_left); + printk(KERN_ERR "%s: no way to get more " + "journal space\n", __func__); + WARN_ON(1); journal_abort(journal, 0); } - spin_lock(&journal->j_state_lock); } else { spin_unlock(&journal->j_list_lock); -- cgit v1.2.3 From 8c3f25d8950c3e9fe6c9849f88679b3f2a071550 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 6 Nov 2008 22:38:07 -0500 Subject: jbd2: don't give up looking for space so easily in __jbd2_log_wait_for_space MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 23f8b79e introducd a regression because it assumed that if there were no transactions ready to be checkpointed, that no progress could be made on making space available in the journal, and so the journal should be aborted. This assumption is false; it could be the case that simply calling jbd2_cleanup_journal_tail() will recover the necessary space, or, for small journals, the currently committing transaction could be responsible for chewing up the required space in the log, so we need to wait for the currently committing transaction to finish before trying to force a checkpoint operation. This patch fixes a bug reported by Mihai Harpau at: https://bugzilla.redhat.com/show_bug.cgi?id=469582 This patch fixes a bug reported by François Valenduc at: http://bugzilla.kernel.org/show_bug.cgi?id=11840 Signed-off-by: "Theodore Ts'o" Cc: Duane Griffin Cc: Toshiyuki Okajima --- fs/jbd2/checkpoint.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 9203c3332f17..9497718fe920 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -116,7 +116,7 @@ static int __try_to_free_cp_buf(struct journal_head *jh) */ void __jbd2_log_wait_for_space(journal_t *journal) { - int nblocks; + int nblocks, space_left; assert_spin_locked(&journal->j_state_lock); nblocks = jbd_space_needed(journal); @@ -129,25 +129,43 @@ void __jbd2_log_wait_for_space(journal_t *journal) /* * Test again, another process may have checkpointed while we * were waiting for the checkpoint lock. If there are no - * outstanding transactions there is nothing to checkpoint and - * we can't make progress. Abort the journal in this case. + * transactions ready to be checkpointed, try to recover + * journal space by calling cleanup_journal_tail(), and if + * that doesn't work, by waiting for the currently committing + * transaction to complete. If there is absolutely no way + * to make progress, this is either a BUG or corrupted + * filesystem, so abort the journal and leave a stack + * trace for forensic evidence. */ spin_lock(&journal->j_state_lock); spin_lock(&journal->j_list_lock); nblocks = jbd_space_needed(journal); - if (__jbd2_log_space_left(journal) < nblocks) { + space_left = __jbd2_log_space_left(journal); + if (space_left < nblocks) { int chkpt = journal->j_checkpoint_transactions != NULL; + tid_t tid = 0; + if (journal->j_committing_transaction) + tid = journal->j_committing_transaction->t_tid; spin_unlock(&journal->j_list_lock); spin_unlock(&journal->j_state_lock); if (chkpt) { jbd2_log_do_checkpoint(journal); + } else if (jbd2_cleanup_journal_tail(journal) == 0) { + /* We were able to recover space; yay! */ + ; + } else if (tid) { + jbd2_log_wait_commit(journal, tid); } else { - printk(KERN_ERR "%s: no transactions\n", - __func__); + printk(KERN_ERR "%s: needed %d blocks and " + "only had %d space available\n", + __func__, nblocks, space_left); + printk(KERN_ERR "%s: no way to get more " + "journal space in %s\n", __func__, + journal->j_devname); + WARN_ON(1); jbd2_journal_abort(journal, 0); } - spin_lock(&journal->j_state_lock); } else { spin_unlock(&journal->j_list_lock); -- cgit v1.2.3 From 2423840ded13e6d3b52d88aff8d033bb78fafd08 Mon Sep 17 00:00:00 2001 From: Sami Liedes Date: Sun, 2 Nov 2008 19:23:30 -0500 Subject: jbd2: deregister proc on failure in jbd2_journal_init_inode jbd2_journal_init_inode() does not call jbd2_stats_proc_exit() on all failure paths after calling jbd2_stats_proc_init(). This leaves dangling references to the fs in proc. This patch fixes a bug reported by Sami Leides at: http://bugzilla.kernel.org/show_bug.cgi?id=11493 Signed-off-by: Sami Liedes Signed-off-by: "Theodore Ts'o" --- fs/jbd2/journal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 783de118de92..e70d657a19f8 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1089,6 +1089,7 @@ journal_t * jbd2_journal_init_inode (struct inode *inode) if (!journal->j_wbuf) { printk(KERN_ERR "%s: Cant allocate bhs for commit thread\n", __func__); + jbd2_stats_proc_exit(journal); kfree(journal); return NULL; } @@ -1098,6 +1099,7 @@ journal_t * jbd2_journal_init_inode (struct inode *inode) if (err) { printk(KERN_ERR "%s: Cannnot locate journal superblock\n", __func__); + jbd2_stats_proc_exit(journal); kfree(journal); return NULL; } -- cgit v1.2.3 From 5a125c3c79167e78ba44efef03af7090ef28eeaf Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Wed, 22 Oct 2008 21:40:13 -0700 Subject: i915: Add GEM ioctl to get available aperture size. This will let userland know when to submit its batchbuffers, before they get too big to fit in the aperture. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 1 + drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/i915_gem.c | 22 ++++++++++++++++++++++ include/drm/i915_drm.h | 13 +++++++++++++ 4 files changed, 38 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 01de536e0211..256e22963ae4 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -960,6 +960,7 @@ struct drm_ioctl_desc i915_ioctls[] = { DRM_IOCTL_DEF(DRM_I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, 0), DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0), DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0), + DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0), }; int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 901e80cf5813..cc8a9f3f7a60 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -502,6 +502,8 @@ int i915_gem_set_tiling(struct drm_device *dev, void *data, struct drm_file *file_priv); int i915_gem_get_tiling(struct drm_device *dev, void *data, struct drm_file *file_priv); +int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); void i915_gem_load(struct drm_device *dev); int i915_gem_proc_init(struct drm_minor *minor); void i915_gem_proc_cleanup(struct drm_minor *minor); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 17ae330ff269..c1733ac4a7f5 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -79,6 +79,28 @@ i915_gem_init_ioctl(struct drm_device *dev, void *data, return 0; } +int +i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_get_aperture *args = data; + struct drm_i915_gem_object *obj_priv; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + args->aper_size = dev->gtt_total; + args->aper_available_size = args->aper_size; + + list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) { + if (obj_priv->pin_count > 0) + args->aper_available_size -= obj_priv->obj->size; + } + + return 0; +} + /** * Creates a new mm object and returns a handle to it. diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index eb4b35031a55..152b34da927c 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -159,6 +159,7 @@ typedef struct _drm_i915_sarea { #define DRM_I915_GEM_SW_FINISH 0x20 #define DRM_I915_GEM_SET_TILING 0x21 #define DRM_I915_GEM_GET_TILING 0x22 +#define DRM_I915_GEM_GET_APERTURE 0x23 #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) #define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) @@ -190,6 +191,7 @@ typedef struct _drm_i915_sarea { #define DRM_IOCTL_I915_GEM_SW_FINISH DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish) #define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling) #define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling) +#define DRM_IOCTL_I915_GEM_GET_APERTURE DRM_IOR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture) /* Allow drivers to submit batchbuffers directly to hardware, relying * on the security mechanisms provided by hardware. @@ -600,4 +602,15 @@ struct drm_i915_gem_get_tiling { uint32_t swizzle_mode; }; +struct drm_i915_gem_get_aperture { + /** Total size of the aperture used by i915_gem_execbuffer, in bytes */ + uint64_t aper_size; + + /** + * Available space in the aperture used by i915_gem_execbuffer, in + * bytes + */ + uint64_t aper_available_size; +}; + #endif /* _I915_DRM_H_ */ -- cgit v1.2.3 From 5880ff19fa29466cb9d7e293710e6aebecfecdd1 Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Thu, 30 Oct 2008 13:39:43 +0200 Subject: RDMA/nes: Reindent mis-indented spinlocks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ilpo Järvinen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 932e56fcf774..ffdd141efe3e 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -220,14 +220,14 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.sq_head; qsize = nesqp->hwqp.sq_tail; /* Check for SQ overflow */ if (((head + (2 * qsize) - nesqp->hwqp.sq_tail) % qsize) == (qsize - 1)) { - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); return -EINVAL; } @@ -269,7 +269,7 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw, nes_write32(nesdev->regs+NES_WQE_ALLOC, (1 << 24) | 0x00800000 | nesqp->hwqp.qp_id); - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); return 0; } @@ -3212,7 +3212,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.sq_head; @@ -3337,7 +3337,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, (counter << 24) | 0x00800000 | nesqp->hwqp.qp_id); } - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); if (err) *bad_wr = ib_wr; @@ -3368,7 +3368,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.rq_head; @@ -3421,7 +3421,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr, nes_write32(nesdev->regs+NES_WQE_ALLOC, (counter<<24) | nesqp->hwqp.qp_id); } - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); if (err) *bad_wr = ib_wr; @@ -3453,7 +3453,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) nes_debug(NES_DBG_CQ, "\n"); - spin_lock_irqsave(&nescq->lock, flags); + spin_lock_irqsave(&nescq->lock, flags); head = nescq->hw_cq.cq_head; cq_size = nescq->hw_cq.cq_size; @@ -3562,7 +3562,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) nes_debug(NES_DBG_CQ, "Reporting %u completions for CQ%u.\n", cqe_count, nescq->hw_cq.cq_number); - spin_unlock_irqrestore(&nescq->lock, flags); + spin_unlock_irqrestore(&nescq->lock, flags); return cqe_count; } -- cgit v1.2.3 From 35c6d6942c966e6d74ea801d8b5007d7f900ce92 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Sun, 2 Nov 2008 21:37:35 -0800 Subject: RDMA/nes: Correct handling of PBL resources * Roll back allocated structures on failures. * Use GFP_ATOMIC instead of GFP_KERNEL since we are holding a lock. * Acquire nesadapter->pbl_lock when modifying PBL counters. * Decrement PBL counters on deallocation. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 44 ++++++++++++++++++++++++++--------- 1 file changed, 33 insertions(+), 11 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index ffdd141efe3e..a8c2193a0261 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -349,7 +349,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, if (nesfmr->nesmr.pbls_used > nesadapter->free_4kpbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; - goto failed_vpbl_alloc; + goto failed_vpbl_avail; } else { nesadapter->free_4kpbl -= nesfmr->nesmr.pbls_used; } @@ -357,7 +357,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, if (nesfmr->nesmr.pbls_used > nesadapter->free_256pbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; - goto failed_vpbl_alloc; + goto failed_vpbl_avail; } else { nesadapter->free_256pbl -= nesfmr->nesmr.pbls_used; } @@ -391,14 +391,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, goto failed_vpbl_alloc; } - nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_KERNEL); + nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1; + nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_ATOMIC); if (!nesfmr->root_vpbl.leaf_vpbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; goto failed_leaf_vpbl_alloc; } - nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1; nes_debug(NES_DBG_MR, "two level pbl, root_vpbl.pbl_vbase=%p" " leaf_pbl_cnt=%d root_vpbl.leaf_vpbl=%p\n", nesfmr->root_vpbl.pbl_vbase, nesfmr->leaf_pbl_cnt, nesfmr->root_vpbl.leaf_vpbl); @@ -519,6 +519,16 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, nesfmr->root_vpbl.pbl_pbase); failed_vpbl_alloc: + if (nesfmr->nesmr.pbls_used != 0) { + spin_lock_irqsave(&nesadapter->pbl_lock, flags); + if (nesfmr->nesmr.pbl_4k) + nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used; + else + nesadapter->free_256pbl += nesfmr->nesmr.pbls_used; + spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); + } + +failed_vpbl_avail: kfree(nesfmr); failed_fmr_alloc: @@ -534,18 +544,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, */ static int nes_dealloc_fmr(struct ib_fmr *ibfmr) { + unsigned long flags; struct nes_mr *nesmr = to_nesmr_from_ibfmr(ibfmr); struct nes_fmr *nesfmr = to_nesfmr(nesmr); struct nes_vnic *nesvnic = to_nesvnic(ibfmr->device); struct nes_device *nesdev = nesvnic->nesdev; - struct nes_mr temp_nesmr = *nesmr; + struct nes_adapter *nesadapter = nesdev->nesadapter; int i = 0; - temp_nesmr.ibmw.device = ibfmr->device; - temp_nesmr.ibmw.pd = ibfmr->pd; - temp_nesmr.ibmw.rkey = ibfmr->rkey; - temp_nesmr.ibmw.uobject = NULL; - /* free the resources */ if (nesfmr->leaf_pbl_cnt == 0) { /* single PBL case */ @@ -561,8 +567,24 @@ static int nes_dealloc_fmr(struct ib_fmr *ibfmr) pci_free_consistent(nesdev->pcidev, 8192, nesfmr->root_vpbl.pbl_vbase, nesfmr->root_vpbl.pbl_pbase); } + nesmr->ibmw.device = ibfmr->device; + nesmr->ibmw.pd = ibfmr->pd; + nesmr->ibmw.rkey = ibfmr->rkey; + nesmr->ibmw.uobject = NULL; + + if (nesfmr->nesmr.pbls_used != 0) { + spin_lock_irqsave(&nesadapter->pbl_lock, flags); + if (nesfmr->nesmr.pbl_4k) { + nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used; + WARN_ON(nesadapter->free_4kpbl > nesadapter->max_4kpbl); + } else { + nesadapter->free_256pbl += nesfmr->nesmr.pbls_used; + WARN_ON(nesadapter->free_256pbl > nesadapter->max_256pbl); + } + spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); + } - return nes_dealloc_mw(&temp_nesmr.ibmw); + return nes_dealloc_mw(&nesmr->ibmw); } -- cgit v1.2.3 From 2e369544ac14de7bd0d76b369c1f6110eefbea8a Mon Sep 17 00:00:00 2001 From: Vadim Makhervaks Date: Sun, 2 Nov 2008 21:39:17 -0800 Subject: RDMA/nes: Fix CQ allocation scheme for multicast receive queue apps Fix CQ allocation for multicast receive queue applications. Before this patch, the CQ was not lined up with the right NIC. Signed-off-by: Vadim Makhervaks Signed-off-by: Chien Tung Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index a8c2193a0261..d36c9a0bf1bb 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1617,7 +1617,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, nes_ucontext->mcrqf = req.mcrqf; if (nes_ucontext->mcrqf) { if (nes_ucontext->mcrqf & 0x80000000) - nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 12 + (nes_ucontext->mcrqf & 0xf) - 1; + nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 28 + 2 * ((nes_ucontext->mcrqf & 0xf) - 1); else if (nes_ucontext->mcrqf & 0x40000000) nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff; else -- cgit v1.2.3 From 633693660045b3e46a63ed618eb38a54339fbcc0 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Sun, 2 Nov 2008 21:40:55 -0800 Subject: RDMA/nes: Mitigate compatibility issue regarding PCIe write credits Under heavy load, there is an compatibility issue regarding PCIe write credits with certain chipsets. It can be mitigated by limiting read requests to 256 Bytes. This workaround is always enabled for Tbird2 on Gladius. We also add a module parameter to enable workaround for non-Gladius cards. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes.c | 16 ++++++++++++++++ drivers/infiniband/hw/nes/nes_hw.h | 1 + 2 files changed, 17 insertions(+) diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index a2b04d62b1a4..aa1dc41f04c8 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -95,6 +95,10 @@ unsigned int wqm_quanta = 0x10000; module_param(wqm_quanta, int, 0644); MODULE_PARM_DESC(wqm_quanta, "WQM quanta"); +static unsigned int limit_maxrdreqsz; +module_param(limit_maxrdreqsz, bool, 0644); +MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes"); + LIST_HEAD(nes_adapter_list); static LIST_HEAD(nes_dev_list); @@ -588,6 +592,18 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i nesdev->nesadapter->port_count; } + if ((limit_maxrdreqsz || + ((nesdev->nesadapter->phy_type[0] == NES_PHY_TYPE_GLADIUS) && + (hw_rev == NE020_REV1))) && + (pcie_get_readrq(pcidev) > 256)) { + if (pcie_set_readrq(pcidev, 256)) + printk(KERN_ERR PFX "Unable to set max read request" + " to 256 bytes\n"); + else + nes_debug(NES_DBG_INIT, "Max read request size set" + " to 256 bytes\n"); + } + tasklet_init(&nesdev->dpc_tasklet, nes_dpc, (unsigned long)nesdev); /* bring up the Control QP */ diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 610b9d859597..bc0b4de04450 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -40,6 +40,7 @@ #define NES_PHY_TYPE_ARGUS 4 #define NES_PHY_TYPE_PUMA_1G 5 #define NES_PHY_TYPE_PUMA_10G 6 +#define NES_PHY_TYPE_GLADIUS 7 #define NES_MULTICAST_PF_MAX 8 -- cgit v1.2.3 From f26ba1751145edbf52b2c89a40e389f2fbdfc1af Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 2 Nov 2008 16:11:01 +0000 Subject: udp: Fix the SNMP counter of UDP_MIB_INDATAGRAMS If UDP echo is sent to xinetd/echo-dgram, the UDP reply will be received at the sender. But the SNMP counter of UDP_MIB_INDATAGRAMS will be not increased, UDP6_MIB_INDATAGRAMS will be increased instead. Endpoint A Endpoint B UDP Echo request -----------> (IPv4, Dst port=7) <---------- UDP Echo Reply (IPv4, Src port=7) This bug is come from this patch cb75994ec311b2cd50e5205efdcc0696abd6675d. It do counter UDP[6]_MIB_INDATAGRAMS until udp[v6]_recvmsg. Because xinetd used IPv6 socket to receive UDP messages, thus, when received UDP packet, the UDP6_MIB_INDATAGRAMS will be increased in function udpv6_recvmsg() even if the packet is a IPv4 UDP packet. This patch fixed the problem. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/ipv6/udp.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 71e259e866a1..18696af106d6 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -138,6 +138,7 @@ int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk, int peeked; int err; int is_udplite = IS_UDPLITE(sk); + int is_udp4; if (addr_len) *addr_len=sizeof(struct sockaddr_in6); @@ -158,6 +159,8 @@ try_again: else if (copied < ulen) msg->msg_flags |= MSG_TRUNC; + is_udp4 = (skb->protocol == htons(ETH_P_IP)); + /* * If checksum is needed at all, try to do it while copying the * data. If the data is truncated, or if we only want a partial @@ -180,9 +183,14 @@ try_again: if (err) goto out_free; - if (!peeked) - UDP6_INC_STATS_USER(sock_net(sk), - UDP_MIB_INDATAGRAMS, is_udplite); + if (!peeked) { + if (is_udp4) + UDP_INC_STATS_USER(sock_net(sk), + UDP_MIB_INDATAGRAMS, is_udplite); + else + UDP6_INC_STATS_USER(sock_net(sk), + UDP_MIB_INDATAGRAMS, is_udplite); + } sock_recv_timestamp(msg, sk, skb); @@ -196,7 +204,7 @@ try_again: sin6->sin6_flowinfo = 0; sin6->sin6_scope_id = 0; - if (skb->protocol == htons(ETH_P_IP)) + if (is_udp4) ipv6_addr_set(&sin6->sin6_addr, 0, 0, htonl(0xffff), ip_hdr(skb)->saddr); else { @@ -207,7 +215,7 @@ try_again: } } - if (skb->protocol == htons(ETH_P_IP)) { + if (is_udp4) { if (inet->cmsg_flags) ip_cmsg_recv(msg, skb); } else { -- cgit v1.2.3 From 0856f93958c488f0cc656be53c26dfd20663bdb3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 2 Nov 2008 16:14:27 +0000 Subject: udp: Fix the SNMP counter of UDP_MIB_INERRORS UDP packets received in udpv6_recvmsg() are not only IPv6 UDP packets, but also have IPv4 UDP packets, so when do the counter of UDP_MIB_INERRORS in udpv6_recvmsg(), we should check whether the packet is a IPv6 UDP packet or a IPv4 UDP packet. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/ipv6/udp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 18696af106d6..8b48512ebf6a 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -236,8 +236,14 @@ out: csum_copy_err: lock_sock(sk); - if (!skb_kill_datagram(sk, skb, flags)) - UDP6_INC_STATS_USER(sock_net(sk), UDP_MIB_INERRORS, is_udplite); + if (!skb_kill_datagram(sk, skb, flags)) { + if (is_udp4) + UDP_INC_STATS_USER(sock_net(sk), + UDP_MIB_INERRORS, is_udplite); + else + UDP6_INC_STATS_USER(sock_net(sk), + UDP_MIB_INERRORS, is_udplite); + } release_sock(sk); if (flags & MSG_DONTWAIT) -- cgit v1.2.3 From 219df32faec97349516c29f33008fea59a46e99a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 3 Nov 2008 08:17:05 +0100 Subject: ALSA: rawmidi - Add open check in rawmidi callbacks The drivers (e.g. mtpav) may call rawmidi functions in irq handlers even though the streams are not opened. This results in Oops or panic. This patch adds the rawmidi state check before actually operating the rawmidi buffers. Tested-by: Ingo Molnar Signed-off-by: Takashi Iwai --- sound/core/rawmidi.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index c4995c9f5730..39672f68ce5d 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -148,6 +148,8 @@ static int snd_rawmidi_runtime_free(struct snd_rawmidi_substream *substream) static inline void snd_rawmidi_output_trigger(struct snd_rawmidi_substream *substream,int up) { + if (!substream->opened) + return; if (up) { tasklet_hi_schedule(&substream->runtime->tasklet); } else { @@ -158,6 +160,8 @@ static inline void snd_rawmidi_output_trigger(struct snd_rawmidi_substream *subs static void snd_rawmidi_input_trigger(struct snd_rawmidi_substream *substream, int up) { + if (!substream->opened) + return; substream->ops->trigger(substream, up); if (!up && substream->runtime->event) tasklet_kill(&substream->runtime->tasklet); @@ -857,6 +861,8 @@ int snd_rawmidi_receive(struct snd_rawmidi_substream *substream, int result = 0, count1; struct snd_rawmidi_runtime *runtime = substream->runtime; + if (!substream->opened) + return -EBADFD; if (runtime->buffer == NULL) { snd_printd("snd_rawmidi_receive: input is not active!!!\n"); return -EINVAL; @@ -1126,6 +1132,8 @@ int snd_rawmidi_transmit_ack(struct snd_rawmidi_substream *substream, int count) int snd_rawmidi_transmit(struct snd_rawmidi_substream *substream, unsigned char *buffer, int count) { + if (!substream->opened) + return -EBADFD; count = snd_rawmidi_transmit_peek(substream, buffer, count); if (count < 0) return count; -- cgit v1.2.3 From b02555c3845f02924b8224ff1fd9a44f2c144dbb Mon Sep 17 00:00:00 2001 From: Zoltan Devai Date: Mon, 3 Nov 2008 00:30:28 +0100 Subject: ALSA: Fix PIT lockup on some chipsets when using the PC-Speaker Fix PIT lockup on some chipsets when using the PC-Speaker. Signed-off-by: Zoltan Devai Signed-off-by: Takashi Iwai --- sound/drivers/pcsp/pcsp_input.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/drivers/pcsp/pcsp_input.c b/sound/drivers/pcsp/pcsp_input.c index cd9b83e7f7d1..0444cdeb4bec 100644 --- a/sound/drivers/pcsp/pcsp_input.c +++ b/sound/drivers/pcsp/pcsp_input.c @@ -24,13 +24,13 @@ static void pcspkr_do_sound(unsigned int count) spin_lock_irqsave(&i8253_lock, flags); if (count) { - /* enable counter 2 */ - outb_p(inb_p(0x61) | 3, 0x61); /* set command for counter 2, 2 byte write */ outb_p(0xB6, 0x43); /* select desired HZ */ outb_p(count & 0xff, 0x42); outb((count >> 8) & 0xff, 0x42); + /* enable counter 2 */ + outb_p(inb_p(0x61) | 3, 0x61); } else { /* disable counter 2 */ outb(inb_p(0x61) & 0xFC, 0x61); -- cgit v1.2.3 From bb072bf0980abbe4fc905df91857a8ad34ca673c Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sun, 2 Nov 2008 03:50:35 +0100 Subject: sound: struct device - replace bus_id with dev_name(), dev_set_name() [stripped sound/isa/* changes, replaced with the next patch -- tiwai] Signed-off-by: Kay Sievers Signed-off-by: Takashi Iwai --- sound/aoa/soundbus/core.c | 2 +- sound/drivers/ml403-ac97cr.c | 4 ++-- sound/soc/soc-core.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/aoa/soundbus/core.c b/sound/aoa/soundbus/core.c index f84f3e505788..fa8ab2815a98 100644 --- a/sound/aoa/soundbus/core.c +++ b/sound/aoa/soundbus/core.c @@ -176,7 +176,7 @@ int soundbus_add_one(struct soundbus_dev *dev) return -EINVAL; } - snprintf(dev->ofdev.dev.bus_id, BUS_ID_SIZE, "soundbus:%x", ++devcount); + dev_set_name(&dev->ofdev.dev, "soundbus:%x", ++devcount); dev->ofdev.dev.bus = &soundbus_bus_type; return of_device_register(&dev->ofdev); } diff --git a/sound/drivers/ml403-ac97cr.c b/sound/drivers/ml403-ac97cr.c index ecdbeb6d3603..7783843ca9ae 100644 --- a/sound/drivers/ml403-ac97cr.c +++ b/sound/drivers/ml403-ac97cr.c @@ -1153,7 +1153,7 @@ snd_ml403_ac97cr_create(struct snd_card *card, struct platform_device *pfdev, /* get irq */ irq = platform_get_irq(pfdev, 0); if (request_irq(irq, snd_ml403_ac97cr_irq, IRQF_DISABLED, - pfdev->dev.bus_id, (void *)ml403_ac97cr)) { + dev_name(&pfdev->dev), (void *)ml403_ac97cr)) { snd_printk(KERN_ERR SND_ML403_AC97CR_DRIVER ": " "unable to grab IRQ %d\n", irq); @@ -1166,7 +1166,7 @@ snd_ml403_ac97cr_create(struct snd_card *card, struct platform_device *pfdev, ml403_ac97cr->irq); irq = platform_get_irq(pfdev, 1); if (request_irq(irq, snd_ml403_ac97cr_irq, IRQF_DISABLED, - pfdev->dev.bus_id, (void *)ml403_ac97cr)) { + dev_name(&pfdev->dev), (void *)ml403_ac97cr)) { snd_printk(KERN_ERR SND_ML403_AC97CR_DRIVER ": " "unable to grab IRQ %d\n", irq); diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 462e635dfc74..0af3bbde5bbe 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -95,8 +95,8 @@ static int soc_ac97_dev_register(struct snd_soc_codec *codec) codec->ac97->dev.parent = NULL; codec->ac97->dev.release = soc_ac97_device_release; - snprintf(codec->ac97->dev.bus_id, BUS_ID_SIZE, "%d-%d:%s", - codec->card->number, 0, codec->name); + dev_set_name(&codec->ac97->dev, "%d-%d:%s", + codec->card->number, 0, codec->name); err = device_register(&codec->ac97->dev); if (err < 0) { snd_printk(KERN_ERR "Can't register ac97 bus\n"); -- cgit v1.2.3 From 0418ff0c8e48aae4e5e0cbcd3e19a057bea2e55a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 3 Nov 2008 08:51:33 +0100 Subject: ALSA: remove direct access of dev->bus_id in sound/isa/* Removed the direct accesses of dev->bus_id in sound/isa/* by replacement with dev_err() or dev_warn() functions. Signed-off-by: Takashi Iwai --- sound/isa/ad1848/ad1848.c | 6 +++--- sound/isa/adlib.c | 12 ++++++------ sound/isa/cs423x/cs4231.c | 8 ++++---- sound/isa/cs423x/cs4236.c | 8 ++++---- sound/isa/es1688/es1688.c | 9 +++------ sound/isa/gus/gusclassic.c | 13 +++++-------- sound/isa/gus/gusextreme.c | 19 +++++++------------ sound/isa/sb/sb8.c | 4 ++-- 8 files changed, 34 insertions(+), 45 deletions(-) diff --git a/sound/isa/ad1848/ad1848.c b/sound/isa/ad1848/ad1848.c index b68d20edc20f..223a6c038819 100644 --- a/sound/isa/ad1848/ad1848.c +++ b/sound/isa/ad1848/ad1848.c @@ -70,15 +70,15 @@ static int __devinit snd_ad1848_match(struct device *dev, unsigned int n) return 0; if (port[n] == SNDRV_AUTO_PORT) { - snd_printk(KERN_ERR "%s: please specify port\n", dev->bus_id); + dev_err(dev, "please specify port\n"); return 0; } if (irq[n] == SNDRV_AUTO_IRQ) { - snd_printk(KERN_ERR "%s: please specify irq\n", dev->bus_id); + dev_err(dev, "please specify irq\n"); return 0; } if (dma1[n] == SNDRV_AUTO_DMA) { - snd_printk(KERN_ERR "%s: please specify dma1\n", dev->bus_id); + dev_err(dev, "please specify dma1\n"); return 0; } return 1; diff --git a/sound/isa/adlib.c b/sound/isa/adlib.c index efa8c80d05b6..374b7177e111 100644 --- a/sound/isa/adlib.c +++ b/sound/isa/adlib.c @@ -36,7 +36,7 @@ static int __devinit snd_adlib_match(struct device *dev, unsigned int n) return 0; if (port[n] == SNDRV_AUTO_PORT) { - snd_printk(KERN_ERR "%s: please specify port\n", dev->bus_id); + dev_err(dev, "please specify port\n"); return 0; } return 1; @@ -55,13 +55,13 @@ static int __devinit snd_adlib_probe(struct device *dev, unsigned int n) card = snd_card_new(index[n], id[n], THIS_MODULE, 0); if (!card) { - snd_printk(KERN_ERR "%s: could not create card\n", dev->bus_id); + dev_err(dev, "could not create card\n"); return -EINVAL; } card->private_data = request_region(port[n], 4, CRD_NAME); if (!card->private_data) { - snd_printk(KERN_ERR "%s: could not grab ports\n", dev->bus_id); + dev_err(dev, "could not grab ports\n"); error = -EBUSY; goto out; } @@ -73,13 +73,13 @@ static int __devinit snd_adlib_probe(struct device *dev, unsigned int n) error = snd_opl3_create(card, port[n], port[n] + 2, OPL3_HW_AUTO, 1, &opl3); if (error < 0) { - snd_printk(KERN_ERR "%s: could not create OPL\n", dev->bus_id); + dev_err(dev, "could not create OPL\n"); goto out; } error = snd_opl3_hwdep_new(opl3, 0, 0, NULL); if (error < 0) { - snd_printk(KERN_ERR "%s: could not create FM\n", dev->bus_id); + dev_err(dev, "could not create FM\n"); goto out; } @@ -87,7 +87,7 @@ static int __devinit snd_adlib_probe(struct device *dev, unsigned int n) error = snd_card_register(card); if (error < 0) { - snd_printk(KERN_ERR "%s: could not register card\n", dev->bus_id); + dev_err(dev, "could not register card\n"); goto out; } diff --git a/sound/isa/cs423x/cs4231.c b/sound/isa/cs423x/cs4231.c index ddd289120aa8..f019d449e2d6 100644 --- a/sound/isa/cs423x/cs4231.c +++ b/sound/isa/cs423x/cs4231.c @@ -74,15 +74,15 @@ static int __devinit snd_cs4231_match(struct device *dev, unsigned int n) return 0; if (port[n] == SNDRV_AUTO_PORT) { - snd_printk(KERN_ERR "%s: please specify port\n", dev->bus_id); + dev_err(dev, "please specify port\n"); return 0; } if (irq[n] == SNDRV_AUTO_IRQ) { - snd_printk(KERN_ERR "%s: please specify irq\n", dev->bus_id); + dev_err(dev, "please specify irq\n"); return 0; } if (dma1[n] == SNDRV_AUTO_DMA) { - snd_printk(KERN_ERR "%s: please specify dma1\n", dev->bus_id); + dev_err(dev, "please specify dma1\n"); return 0; } return 1; @@ -133,7 +133,7 @@ static int __devinit snd_cs4231_probe(struct device *dev, unsigned int n) mpu_port[n], 0, mpu_irq[n], mpu_irq[n] >= 0 ? IRQF_DISABLED : 0, NULL) < 0) - printk(KERN_WARNING "%s: MPU401 not detected\n", dev->bus_id); + dev_warn(dev, "MPU401 not detected\n"); } snd_card_set_dev(card, dev); diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index 91f9c15d3e30..019c9401663e 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -488,19 +488,19 @@ static int __devinit snd_cs423x_isa_match(struct device *pdev, return 0; if (port[dev] == SNDRV_AUTO_PORT) { - snd_printk(KERN_ERR "%s: please specify port\n", pdev->bus_id); + dev_err(pdev, "please specify port\n"); return 0; } if (cport[dev] == SNDRV_AUTO_PORT) { - snd_printk(KERN_ERR "%s: please specify cport\n", pdev->bus_id); + dev_err(pdev, "please specify cport\n"); return 0; } if (irq[dev] == SNDRV_AUTO_IRQ) { - snd_printk(KERN_ERR "%s: please specify irq\n", pdev->bus_id); + dev_err(pdev, "please specify irq\n"); return 0; } if (dma1[dev] == SNDRV_AUTO_DMA) { - snd_printk(KERN_ERR "%s: please specify dma1\n", pdev->bus_id); + dev_err(pdev, "please specify dma1\n"); return 0; } return 1; diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c index f88639ea64b2..b46377139cf8 100644 --- a/sound/isa/es1688/es1688.c +++ b/sound/isa/es1688/es1688.c @@ -88,16 +88,14 @@ static int __devinit snd_es1688_legacy_create(struct snd_card *card, if (irq[n] == SNDRV_AUTO_IRQ) { irq[n] = snd_legacy_find_free_irq(possible_irqs); if (irq[n] < 0) { - snd_printk(KERN_ERR "%s: unable to find a free IRQ\n", - dev->bus_id); + dev_err(dev, "unable to find a free IRQ\n"); return -EBUSY; } } if (dma8[n] == SNDRV_AUTO_DMA) { dma8[n] = snd_legacy_find_free_dma(possible_dmas); if (dma8[n] < 0) { - snd_printk(KERN_ERR "%s: unable to find a free DMA\n", - dev->bus_id); + dev_err(dev, "unable to find a free DMA\n"); return -EBUSY; } } @@ -147,8 +145,7 @@ static int __devinit snd_es1688_probe(struct device *dev, unsigned int n) if (snd_opl3_create(card, chip->port, chip->port + 2, OPL3_HW_OPL3, 0, &opl3) < 0) - printk(KERN_WARNING "%s: opl3 not detected at 0x%lx\n", - dev->bus_id, chip->port); + dev_warn(dev, "opl3 not detected at 0x%lx\n", chip->port); else { error = snd_opl3_hwdep_new(opl3, 0, 1, NULL); if (error < 0) diff --git a/sound/isa/gus/gusclassic.c b/sound/isa/gus/gusclassic.c index 8f914b37bf89..426532a4d730 100644 --- a/sound/isa/gus/gusclassic.c +++ b/sound/isa/gus/gusclassic.c @@ -90,24 +90,21 @@ static int __devinit snd_gusclassic_create(struct snd_card *card, if (irq[n] == SNDRV_AUTO_IRQ) { irq[n] = snd_legacy_find_free_irq(possible_irqs); if (irq[n] < 0) { - snd_printk(KERN_ERR "%s: unable to find a free IRQ\n", - dev->bus_id); + dev_err(dev, "unable to find a free IRQ\n"); return -EBUSY; } } if (dma1[n] == SNDRV_AUTO_DMA) { dma1[n] = snd_legacy_find_free_dma(possible_dmas); if (dma1[n] < 0) { - snd_printk(KERN_ERR "%s: unable to find a free DMA1\n", - dev->bus_id); + dev_err(dev, "unable to find a free DMA1\n"); return -EBUSY; } } if (dma2[n] == SNDRV_AUTO_DMA) { dma2[n] = snd_legacy_find_free_dma(possible_dmas); if (dma2[n] < 0) { - snd_printk(KERN_ERR "%s: unable to find a free DMA2\n", - dev->bus_id); + dev_err(dev, "unable to find a free DMA2\n"); return -EBUSY; } } @@ -174,8 +171,8 @@ static int __devinit snd_gusclassic_probe(struct device *dev, unsigned int n) error = -ENODEV; if (gus->max_flag || gus->ess_flag) { - snd_printk(KERN_ERR "%s: GUS Classic or ACE soundcard was " - "not detected at 0x%lx\n", dev->bus_id, gus->gf1.port); + dev_err(dev, "GUS Classic or ACE soundcard was " + "not detected at 0x%lx\n", gus->gf1.port); goto out; } diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c index da13185eb0a0..7ad4c3b41a84 100644 --- a/sound/isa/gus/gusextreme.c +++ b/sound/isa/gus/gusextreme.c @@ -106,16 +106,14 @@ static int __devinit snd_gusextreme_es1688_create(struct snd_card *card, if (irq[n] == SNDRV_AUTO_IRQ) { irq[n] = snd_legacy_find_free_irq(possible_irqs); if (irq[n] < 0) { - snd_printk(KERN_ERR "%s: unable to find a free IRQ " - "for ES1688\n", dev->bus_id); + dev_err(dev, "unable to find a free IRQ for ES1688\n"); return -EBUSY; } } if (dma8[n] == SNDRV_AUTO_DMA) { dma8[n] = snd_legacy_find_free_dma(possible_dmas); if (dma8[n] < 0) { - snd_printk(KERN_ERR "%s: unable to find a free DMA " - "for ES1688\n", dev->bus_id); + dev_err(dev, "unable to find a free DMA for ES1688\n"); return -EBUSY; } } @@ -143,16 +141,14 @@ static int __devinit snd_gusextreme_gus_card_create(struct snd_card *card, if (gf1_irq[n] == SNDRV_AUTO_IRQ) { gf1_irq[n] = snd_legacy_find_free_irq(possible_irqs); if (gf1_irq[n] < 0) { - snd_printk(KERN_ERR "%s: unable to find a free IRQ " - "for GF1\n", dev->bus_id); + dev_err(dev, "unable to find a free IRQ for GF1\n"); return -EBUSY; } } if (dma1[n] == SNDRV_AUTO_DMA) { dma1[n] = snd_legacy_find_free_dma(possible_dmas); if (dma1[n] < 0) { - snd_printk(KERN_ERR "%s: unable to find a free DMA " - "for GF1\n", dev->bus_id); + dev_err(dev, "unable to find a free DMA for GF1\n"); return -EBUSY; } } @@ -278,8 +274,8 @@ static int __devinit snd_gusextreme_probe(struct device *dev, unsigned int n) error = -ENODEV; if (!gus->ess_flag) { - snd_printk(KERN_ERR "%s: GUS Extreme soundcard was not " - "detected at 0x%lx\n", dev->bus_id, gus->gf1.port); + dev_err(dev, "GUS Extreme soundcard was not " + "detected at 0x%lx\n", gus->gf1.port); goto out; } gus->codec_flag = 1; @@ -310,8 +306,7 @@ static int __devinit snd_gusextreme_probe(struct device *dev, unsigned int n) if (snd_opl3_create(card, es1688->port, es1688->port + 2, OPL3_HW_OPL3, 0, &opl3) < 0) - printk(KERN_ERR "%s: opl3 not detected at 0x%lx\n", - dev->bus_id, es1688->port); + dev_warn(dev, "opl3 not detected at 0x%lx\n", es1688->port); else { error = snd_opl3_hwdep_new(opl3, 0, 2, NULL); if (error < 0) diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c index 336a34277907..667eccc676a4 100644 --- a/sound/isa/sb/sb8.c +++ b/sound/isa/sb/sb8.c @@ -85,11 +85,11 @@ static int __devinit snd_sb8_match(struct device *pdev, unsigned int dev) if (!enable[dev]) return 0; if (irq[dev] == SNDRV_AUTO_IRQ) { - snd_printk(KERN_ERR "%s: please specify irq\n", pdev->bus_id); + dev_err(pdev, "please specify irq\n"); return 0; } if (dma8[dev] == SNDRV_AUTO_DMA) { - snd_printk(KERN_ERR "%s: please specify dma8\n", pdev->bus_id); + dev_err(pdev, "please specify dma8\n"); return 0; } return 1; -- cgit v1.2.3 From 55c8eb6c8eaa5009eed1557b296da5d4ea9c369a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 3 Nov 2008 00:04:24 -0800 Subject: SMC91x: Fix compilation on some platforms. This reverts 51ac3beffd4afaea4350526cf01fe74aaff25eff ('SMC91x: delete unused local variable "lp"') and adds __maybe_unused markers to these (potentially) unused variables. The issue is that in some configurations SMC_IO_SHIFT evaluates to '(lp->io_shift)', but in some others it's plain '0'. Based upon a build failure report from Manuel Lauss. Signed-off-by: David S. Miller --- drivers/net/smc91x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 6f9895d4e5bd..fc80f250da31 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2060,6 +2060,7 @@ static int smc_request_attrib(struct platform_device *pdev, struct net_device *ndev) { struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); + struct smc_local *lp __maybe_unused = netdev_priv(ndev); if (!res) return 0; @@ -2074,6 +2075,7 @@ static void smc_release_attrib(struct platform_device *pdev, struct net_device *ndev) { struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); + struct smc_local *lp __maybe_unused = netdev_priv(ndev); if (res) release_mem_region(res->start, ATTRIB_SIZE); -- cgit v1.2.3 From 69e50282b726bab75c8050c4836dc89b7eb7bf1a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 3 Nov 2008 10:07:43 +0100 Subject: ALSA: hda - Add a quirk for another Acer Aspire (1025:0090) Added a quirk for another Acer Aspier laptop (1025:0090) with ALC883 codec. Reported in Novell bnc#426935: https://bugzilla.novell.com/show_bug.cgi?id=426935 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d327a371595c..a4666c96a44f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8414,6 +8414,7 @@ static const char *alc883_models[ALC883_MODEL_LAST] = { static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC883_3ST_6ch_DIG), SND_PCI_QUIRK(0x1025, 0x006c, "Acer Aspire 9810", ALC883_ACER_ASPIRE), + SND_PCI_QUIRK(0x1025, 0x0090, "Acer Aspire", ALC883_ACER_ASPIRE), SND_PCI_QUIRK(0x1025, 0x0110, "Acer Aspire", ALC883_ACER_ASPIRE), SND_PCI_QUIRK(0x1025, 0x0112, "Acer Aspire 9303", ALC883_ACER_ASPIRE), SND_PCI_QUIRK(0x1025, 0x0121, "Acer Aspire 5920G", ALC883_ACER_ASPIRE), -- cgit v1.2.3 From c2c80529460095035752bf0ecc1af82c1e0f6e0f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 31 Oct 2008 19:50:41 +0000 Subject: tracing, alpha: undefined reference to `save_stack_trace' Impact: build fix on !stacktrace architectures only select STACKTRACE on architectures that have STACKTRACE_SUPPORT ... since we also need to ifdef out the guts of ftrace_trace_stack(). We also want to disallow setting TRACE_ITER_STACKTRACE in trace_flags on such configs, but that can wait. Signed-off-by: Al Viro Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/Kconfig | 2 +- kernel/trace/trace.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index b58f43bec363..33dbefd471e8 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -25,7 +25,7 @@ config TRACING bool select DEBUG_FS select RING_BUFFER - select STACKTRACE + select STACKTRACE if STACKTRACE_SUPPORT select TRACEPOINTS select NOP_TRACER diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 8a499e2adaec..85bee775a03e 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -705,6 +705,7 @@ static void ftrace_trace_stack(struct trace_array *tr, unsigned long flags, int skip, int pc) { +#ifdef CONFIG_STACKTRACE struct ring_buffer_event *event; struct stack_entry *entry; struct stack_trace trace; @@ -730,6 +731,7 @@ static void ftrace_trace_stack(struct trace_array *tr, save_stack_trace(&trace); ring_buffer_unlock_commit(tr->buffer, event, irq_flags); +#endif } void __trace_stack(struct trace_array *tr, -- cgit v1.2.3 From 55e03a68d2489d116a5c5e8111ecef3f69831ed6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 3 Nov 2008 10:21:36 +0100 Subject: ALSA: emu10k1 - Add more invert_shared_spdif flag to Audigy models Reported in Novell bnc#440862: https://bugzilla.novell.com/show_bug.cgi?id=440862 Signed-off-by: Takashi Iwai --- sound/pci/emu10k1/emu10k1_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 2f283ea6ad9a..de5ee8f097f6 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1464,6 +1464,7 @@ static struct snd_emu_chip_details emu_chip_details[] = { .ca0151_chip = 1, .spk71 = 1, .spdif_bug = 1, + .invert_shared_spdif = 1, /* digital/analog switch swapped */ .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20021102, .driver = "Audigy2", .name = "Audigy 2 ZS [SB0350]", @@ -1473,6 +1474,7 @@ static struct snd_emu_chip_details emu_chip_details[] = { .ca0151_chip = 1, .spk71 = 1, .spdif_bug = 1, + .invert_shared_spdif = 1, /* digital/analog switch swapped */ .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20011102, .driver = "Audigy2", .name = "Audigy 2 ZS [2001]", @@ -1482,6 +1484,7 @@ static struct snd_emu_chip_details emu_chip_details[] = { .ca0151_chip = 1, .spk71 = 1, .spdif_bug = 1, + .invert_shared_spdif = 1, /* digital/analog switch swapped */ .ac97_chip = 1} , /* Audigy 2 */ /* Tested by James@superbug.co.uk 3rd July 2005 */ -- cgit v1.2.3 From a1caa32295d67284ecba18cd8db692c7166f0706 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Mon, 3 Nov 2008 01:30:23 -0800 Subject: XFRM: copy_to_user_kmaddress() reports local address twice While adding support for MIGRATE/KMADDRESS in strongSwan (as specified in draft-ebalard-mext-pfkey-enhanced-migrate-00), Andreas Steffen noticed that XFRMA_KMADDRESS attribute passed to userland contains the local address twice (remote provides local address instead of remote one). This bug in copy_to_user_kmaddress() affects only key managers that use native XFRM interface (key managers that use PF_KEY are not affected). For the record, the bug was in the initial changeset I posted which added support for KMADDRESS (13c1d18931ebb5cf407cb348ef2cd6284d68902d 'xfrm: MIGRATE enhancements (draft-ebalard-mext-pfkey-enhanced-migrate)'). Signed-off-by: Arnaud Ebalard Reported-by: Andreas Steffen Signed-off-by: David S. Miller --- net/xfrm/xfrm_user.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 4a8a1abb59ee..a278a6f3b991 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1816,7 +1816,7 @@ static int copy_to_user_kmaddress(struct xfrm_kmaddress *k, struct sk_buff *skb) uk.family = k->family; uk.reserved = k->reserved; memcpy(&uk.local, &k->local, sizeof(uk.local)); - memcpy(&uk.remote, &k->local, sizeof(uk.remote)); + memcpy(&uk.remote, &k->remote, sizeof(uk.remote)); return nla_put(skb, XFRMA_KMADDRESS, sizeof(uk), &uk); } -- cgit v1.2.3 From b3aa557722b3d5858f14ca559e03461c24125aaf Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 31 Oct 2008 15:44:07 -0400 Subject: ftrace: use kretprobe trampoline name to test in output Impact: ia64+tracing build fix When a function is kprobed, the return address is set to the kprobe_trampoline, or something similar. This caused the output of the trace to look confusing when the parent seemed to be this "kprobe_trampoline" function. To fix this, Abhishek Sagar added a test of the instruction pointer of the parent to see if it matched the kprobe_trampoline. If it did, the output would print a "[unknown/kretprobe'd]" instead. Unfortunately, not all archs do this the same way, and the trampoline function may not be exported, which causes failures in builds. This patch will compare the name instead of the pointer to see if it matches. This prevents us from depending on a function from being exported, and should work on all archs. The worst that can happen is that an arch might use a different name and then we go back to the confusing output. At least the arch will still build. Reported-by: Abhishek Sagar Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Tested-by: Abhishek Sagar Acked-by: Abhishek Sagar --- kernel/trace/trace.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 85bee775a03e..9f3b478f9171 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1088,17 +1088,20 @@ static void s_stop(struct seq_file *m, void *p) mutex_unlock(&trace_types_lock); } -#define KRETPROBE_MSG "[unknown/kretprobe'd]" - #ifdef CONFIG_KRETPROBES -static inline int kretprobed(unsigned long addr) +static inline const char *kretprobed(const char *name) { - return addr == (unsigned long)kretprobe_trampoline; + static const char tramp_name[] = "kretprobe_trampoline"; + int size = sizeof(tramp_name); + + if (strncmp(tramp_name, name, size) == 0) + return "[unknown/kretprobe'd]"; + return name; } #else -static inline int kretprobed(unsigned long addr) +static inline const char *kretprobed(const char *name) { - return 0; + return name; } #endif /* CONFIG_KRETPROBES */ @@ -1107,10 +1110,13 @@ seq_print_sym_short(struct trace_seq *s, const char *fmt, unsigned long address) { #ifdef CONFIG_KALLSYMS char str[KSYM_SYMBOL_LEN]; + const char *name; kallsyms_lookup(address, NULL, NULL, NULL, str); - return trace_seq_printf(s, fmt, str); + name = kretprobed(str); + + return trace_seq_printf(s, fmt, name); #endif return 1; } @@ -1121,9 +1127,12 @@ seq_print_sym_offset(struct trace_seq *s, const char *fmt, { #ifdef CONFIG_KALLSYMS char str[KSYM_SYMBOL_LEN]; + const char *name; sprint_symbol(str, address); - return trace_seq_printf(s, fmt, str); + name = kretprobed(str); + + return trace_seq_printf(s, fmt, name); #endif return 1; } @@ -1377,10 +1386,7 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) seq_print_ip_sym(s, field->ip, sym_flags); trace_seq_puts(s, " ("); - if (kretprobed(field->parent_ip)) - trace_seq_puts(s, KRETPROBE_MSG); - else - seq_print_ip_sym(s, field->parent_ip, sym_flags); + seq_print_ip_sym(s, field->parent_ip, sym_flags); trace_seq_puts(s, ")\n"); break; } @@ -1496,12 +1502,9 @@ static enum print_line_t print_trace_fmt(struct trace_iterator *iter) ret = trace_seq_printf(s, " <-"); if (!ret) return TRACE_TYPE_PARTIAL_LINE; - if (kretprobed(field->parent_ip)) - ret = trace_seq_puts(s, KRETPROBE_MSG); - else - ret = seq_print_ip_sym(s, - field->parent_ip, - sym_flags); + ret = seq_print_ip_sym(s, + field->parent_ip, + sym_flags); if (!ret) return TRACE_TYPE_PARTIAL_LINE; } -- cgit v1.2.3 From 73557af5bf32c3db973050de1fb73423e8fc873e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 31 Oct 2008 13:59:49 -0400 Subject: x86, voyager: fix smp_intr_init() compile breakage Impact: fix x86/Voyager build Looks like this became static on the rest of x86. Fix it up by adding an external definition to mach-voyager/setup.c Signed-off-by: Ingo Molnar --- arch/x86/include/asm/voyager.h | 1 + arch/x86/mach-voyager/setup.c | 2 +- arch/x86/mach-voyager/voyager_smp.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/voyager.h b/arch/x86/include/asm/voyager.h index 9c811d2e6f91..b3e647307625 100644 --- a/arch/x86/include/asm/voyager.h +++ b/arch/x86/include/asm/voyager.h @@ -520,6 +520,7 @@ extern void voyager_restart(void); extern void voyager_cat_power_off(void); extern void voyager_cat_do_common_interrupt(void); extern void voyager_handle_nmi(void); +extern void voyager_smp_intr_init(void); /* Commands for the following are */ #define VOYAGER_PSI_READ 0 #define VOYAGER_PSI_WRITE 1 diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index 6bbdd633864c..a580b9562e76 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -27,7 +27,7 @@ static struct irqaction irq2 = { void __init intr_init_hook(void) { #ifdef CONFIG_SMP - smp_intr_init(); + voyager_smp_intr_init(); #endif setup_irq(2, &irq2); diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 7f4c6af14351..0e331652681e 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -1258,7 +1258,7 @@ static void handle_vic_irq(unsigned int irq, struct irq_desc *desc) #define QIC_SET_GATE(cpi, vector) \ set_intr_gate((cpi) + QIC_DEFAULT_CPI_BASE, (vector)) -void __init smp_intr_init(void) +void __init voyager_smp_intr_init(void) { int i; -- cgit v1.2.3 From 818e3dd30a4ff34fff6d90e87ae59c73f6a53691 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 31 Oct 2008 09:58:35 -0400 Subject: tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index cedf4e268285..3f3380638646 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1022,8 +1022,23 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer, struct ring_buffer_event *event; u64 ts, delta; int commit = 0; + int nr_loops = 0; again: + /* + * We allow for interrupts to reenter here and do a trace. + * If one does, it will cause this original code to loop + * back here. Even with heavy interrupts happening, this + * should only happen a few times in a row. If this happens + * 1000 times in a row, there must be either an interrupt + * storm or we have something buggy. + * Bail! + */ + if (unlikely(++nr_loops > 1000)) { + RB_WARN_ON(cpu_buffer, 1); + return NULL; + } + ts = ring_buffer_time_stamp(cpu_buffer->cpu); /* @@ -1532,10 +1547,23 @@ rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer) { struct buffer_page *reader = NULL; unsigned long flags; + int nr_loops = 0; spin_lock_irqsave(&cpu_buffer->lock, flags); again: + /* + * This should normally only loop twice. But because the + * start of the reader inserts an empty page, it causes + * a case where we will loop three times. There should be no + * reason to loop four times (that I know of). + */ + if (unlikely(++nr_loops > 3)) { + RB_WARN_ON(cpu_buffer, 1); + reader = NULL; + goto out; + } + reader = cpu_buffer->reader_page; /* If there's more to read, return this page */ @@ -1665,6 +1693,7 @@ ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts) struct ring_buffer_per_cpu *cpu_buffer; struct ring_buffer_event *event; struct buffer_page *reader; + int nr_loops = 0; if (!cpu_isset(cpu, buffer->cpumask)) return NULL; @@ -1672,6 +1701,19 @@ ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts) cpu_buffer = buffer->buffers[cpu]; again: + /* + * We repeat when a timestamp is encountered. It is possible + * to get multiple timestamps from an interrupt entering just + * as one timestamp is about to be written. The max times + * that this can happen is the number of nested interrupts we + * can have. Nesting 10 deep of interrupts is clearly + * an anomaly. + */ + if (unlikely(++nr_loops > 10)) { + RB_WARN_ON(cpu_buffer, 1); + return NULL; + } + reader = rb_get_reader_page(cpu_buffer); if (!reader) return NULL; @@ -1722,6 +1764,7 @@ ring_buffer_iter_peek(struct ring_buffer_iter *iter, u64 *ts) struct ring_buffer *buffer; struct ring_buffer_per_cpu *cpu_buffer; struct ring_buffer_event *event; + int nr_loops = 0; if (ring_buffer_iter_empty(iter)) return NULL; @@ -1730,6 +1773,19 @@ ring_buffer_iter_peek(struct ring_buffer_iter *iter, u64 *ts) buffer = cpu_buffer->buffer; again: + /* + * We repeat when a timestamp is encountered. It is possible + * to get multiple timestamps from an interrupt entering just + * as one timestamp is about to be written. The max times + * that this can happen is the number of nested interrupts we + * can have. Nesting 10 deep of interrupts is clearly + * an anomaly. + */ + if (unlikely(++nr_loops > 10)) { + RB_WARN_ON(cpu_buffer, 1); + return NULL; + } + if (rb_per_cpu_empty(cpu_buffer)) return NULL; -- cgit v1.2.3 From 6b3ab21ef1ac15db4b053ce0ba8eae0ef9361c8a Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Mon, 3 Nov 2008 08:12:43 -0500 Subject: ALSA: hda: make a STAC_DELL_EQ option Add support for explicitly enabling the EQ distortion hack for systems without software biquad support. Signed-off-by: Matthew Ranostay Cc: stable@kernel.org Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index df9b0bc7f878..e6085915d86d 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -69,6 +69,7 @@ enum { enum { STAC_92HD73XX_REF, STAC_DELL_M6, + STAC_DELL_EQ, STAC_92HD73XX_MODELS }; @@ -773,9 +774,7 @@ static struct hda_verb dell_eq_core_init[] = { }; static struct hda_verb dell_m6_core_init[] = { - /* set master volume to max value without distortion - * and direct control */ - { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec}, + { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, /* setup audio connections */ { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00}, { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01}, @@ -1600,11 +1599,13 @@ static unsigned int dell_m6_pin_configs[13] = { static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = { [STAC_92HD73XX_REF] = ref92hd73xx_pin_configs, [STAC_DELL_M6] = dell_m6_pin_configs, + [STAC_DELL_EQ] = dell_m6_pin_configs, }; static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { [STAC_92HD73XX_REF] = "ref", [STAC_DELL_M6] = "dell-m6", + [STAC_DELL_EQ] = "dell-eq", }; static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { @@ -4131,12 +4132,17 @@ again: sizeof(stac92hd73xx_dmux)); switch (spec->board_config) { - case STAC_DELL_M6: + case STAC_DELL_EQ: spec->init = dell_eq_core_init; + /* fallthru */ + case STAC_DELL_M6: spec->num_smuxes = 0; spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER]; spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP]; spec->num_amps = 1; + + if (!spec->init) + spec->init = dell_m6_core_init; switch (codec->subsystem_id) { case 0x1028025e: /* Analog Mics */ case 0x1028025f: @@ -4146,8 +4152,6 @@ again: break; case 0x10280271: /* Digital Mics */ case 0x10280272: - spec->init = dell_m6_core_init; - /* fall-through */ case 0x10280254: case 0x10280255: stac92xx_set_config_reg(codec, 0x13, 0x90A60160); -- cgit v1.2.3 From 8d5c6603c408d91ecf543f244f10ccb8b500ad95 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 3 Nov 2008 18:21:44 +0100 Subject: io mapping: improve documentation Impact: add documentation Signed-off-by: Keith Packard Signed-off-by: Ingo Molnar --- Documentation/io-mapping.txt | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/Documentation/io-mapping.txt b/Documentation/io-mapping.txt index cd2f726becc8..473e43b2d588 100644 --- a/Documentation/io-mapping.txt +++ b/Documentation/io-mapping.txt @@ -71,6 +71,12 @@ range, creating a permanent kernel-visible mapping to the resource. The map_atomic and map functions add the requested offset to the base of the virtual address returned by ioremap_wc. -On 32-bit processors, io_mapping_map_atomic_wc uses io_map_atomic_prot_pfn, -which uses the fixmaps to get us a mapping to a page using an atomic fashion. -For io_mapping_map_wc, ioremap_wc() is used to get a mapping of the region. +On 32-bit processors with HIGHMEM defined, io_mapping_map_atomic_wc uses +kmap_atomic_pfn to map the specified page in an atomic fashion; +kmap_atomic_pfn isn't really supposed to be used with device pages, but it +provides an efficient mapping for this usage. + +On 32-bit processors without HIGHMEM defined, io_mapping_map_atomic_wc and +io_mapping_map_wc both use ioremap_wc, a terribly inefficient function which +performs an IPI to inform all processors about the new mapping. This results +in a significant performance penalty. -- cgit v1.2.3 From e5beae16901795223d677f15aa2fe192976278ee Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 3 Nov 2008 18:21:45 +0100 Subject: io mapping: clean up #ifdefs Impact: cleanup clean up ifdefs: change #ifdef CONFIG_X86_32/64 to CONFIG_HAVE_ATOMIC_IOMAP. flip around the #ifdef sections to clean up the structure. Signed-off-by: Keith Packard Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 4 ++++ include/linux/io-mapping.h | 43 +++++++++++++++++++++++++------------------ 2 files changed, 29 insertions(+), 18 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6f20718d3156..e60c59b81bdd 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1894,6 +1894,10 @@ config SYSVIPC_COMPAT endmenu +config HAVE_ATOMIC_IOMAP + def_bool y + depends on X86_32 + source "net/Kconfig" source "drivers/Kconfig" diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index 1b566993db6e..82df31726a54 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -33,86 +33,93 @@ /* this struct isn't actually defined anywhere */ struct io_mapping; -#ifdef CONFIG_X86_64 +#ifdef CONFIG_HAVE_ATOMIC_IOMAP + +/* + * For small address space machines, mapping large objects + * into the kernel virtual space isn't practical. Where + * available, use fixmap support to dynamically map pages + * of the object at run time. + */ -/* Create the io_mapping object*/ static inline struct io_mapping * io_mapping_create_wc(unsigned long base, unsigned long size) { - return (struct io_mapping *) ioremap_wc(base, size); + return (struct io_mapping *) base; } static inline void io_mapping_free(struct io_mapping *mapping) { - iounmap(mapping); } /* Atomic map/unmap */ static inline void * io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset) { - return ((char *) mapping) + offset; + offset += (unsigned long) mapping; + return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0, + __pgprot(__PAGE_KERNEL_WC)); } static inline void io_mapping_unmap_atomic(void *vaddr) { + iounmap_atomic(vaddr, KM_USER0); } -/* Non-atomic map/unmap */ static inline void * io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) { - return ((char *) mapping) + offset; + offset += (unsigned long) mapping; + return ioremap_wc(offset, PAGE_SIZE); } static inline void io_mapping_unmap(void *vaddr) { + iounmap(vaddr); } -#endif /* CONFIG_X86_64 */ +#else -#ifdef CONFIG_X86_32 +/* Create the io_mapping object*/ static inline struct io_mapping * io_mapping_create_wc(unsigned long base, unsigned long size) { - return (struct io_mapping *) base; + return (struct io_mapping *) ioremap_wc(base, size); } static inline void io_mapping_free(struct io_mapping *mapping) { + iounmap(mapping); } /* Atomic map/unmap */ static inline void * io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset) { - offset += (unsigned long) mapping; - return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0, - __pgprot(__PAGE_KERNEL_WC)); + return ((char *) mapping) + offset; } static inline void io_mapping_unmap_atomic(void *vaddr) { - iounmap_atomic(vaddr, KM_USER0); } +/* Non-atomic map/unmap */ static inline void * io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) { - offset += (unsigned long) mapping; - return ioremap_wc(offset, PAGE_SIZE); + return ((char *) mapping) + offset; } static inline void io_mapping_unmap(void *vaddr) { - iounmap(vaddr); } -#endif /* CONFIG_X86_32 */ + +#endif /* HAVE_ATOMIC_IOMAP */ #endif /* _LINUX_IO_MAPPING_H */ -- cgit v1.2.3 From ae6884a9da56f8921e432e663b4ccb4a1851b2ea Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 3 Nov 2008 14:05:08 -0500 Subject: cifs: fix renaming one hardlink on top of another cifs: fix renaming one hardlink on top of another POSIX says that renaming one hardlink on top of another to the same inode is a no-op. We had the logic mostly right, but forgot to clear the return code. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index d54fa8aeaea9..ff8c68de4a92 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1361,9 +1361,11 @@ int cifs_rename(struct inode *source_dir, struct dentry *source_dentry, CIFS_MOUNT_MAP_SPECIAL_CHR); if (tmprc == 0 && (info_buf_source->UniqueId == - info_buf_target->UniqueId)) + info_buf_target->UniqueId)) { /* same file, POSIX says that this is a noop */ + rc = 0; goto cifs_rename_exit; + } } /* else ... BB we could add the same check for Windows by checking the UniqueId via FILE_INTERNAL_INFO */ -- cgit v1.2.3 From 7385d595751874854a6729fbaaa7f793480bbb67 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 2 Nov 2008 17:49:59 +0300 Subject: fs_enet: fix polling 1. compile fix for irqreturn_t type change 2. restore ->poll_controller after CONFIG_PPC_CPM_NEW_BINDING transition Signed-off-by: Alexey Dobriyan Signed-off-by: Jeff Garzik --- drivers/net/fs_enet/fs_enet-main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index cb51c1fb0338..a6f49d025787 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1099,7 +1099,9 @@ static int __devinit fs_enet_probe(struct of_device *ofdev, ndev->stop = fs_enet_close; ndev->get_stats = fs_enet_get_stats; ndev->set_multicast_list = fs_set_multicast_list; - +#ifdef CONFIG_NET_POLL_CONTROLLER + ndev->poll_controller = fs_enet_netpoll; +#endif if (fpi->use_napi) netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi, fpi->napi_weight); @@ -1209,7 +1211,7 @@ static void __exit fs_cleanup(void) static void fs_enet_netpoll(struct net_device *dev) { disable_irq(dev->irq); - fs_enet_interrupt(dev->irq, dev, NULL); + fs_enet_interrupt(dev->irq, dev); enable_irq(dev->irq); } #endif -- cgit v1.2.3 From 1d19ecfc65ed01bac7a58f83004057ad704ee7cc Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Sun, 2 Nov 2008 20:30:33 -0800 Subject: net: kconfig cleanup The bool kconfig option added to ixgbe and myri10ge for DCA is ambigous, so this patch adds a description to the kconfig option. Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f749b40f954e..11f143f4adf6 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2010,9 +2010,13 @@ config IGB_LRO If in doubt, say N. config IGB_DCA - bool "Enable DCA" + bool "Direct Cache Access (DCA) Support" default y depends on IGB && DCA && !(IGB=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. source "drivers/net/ixp2000/Kconfig" @@ -2437,9 +2441,13 @@ config IXGBE will be called ixgbe. config IXGBE_DCA - bool + bool "Direct Cache Access (DCA) Support" default y depends on IXGBE && DCA && !(IXGBE=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. config IXGB tristate "Intel(R) PRO/10GbE support" @@ -2489,9 +2497,13 @@ config MYRI10GE will be called myri10ge. config MYRI10GE_DCA - bool + bool "Direct Cache Access (DCA) Support" default y depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. config NETXEN_NIC tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" -- cgit v1.2.3 From ee04448d8871e71f55520d62cf6adbf5dd403c99 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 1 Nov 2008 06:32:20 +0100 Subject: mv643xx_eth: fix SMI bus access timeouts The mv643xx_eth mii bus implementation uses wait_event_timeout() to wait for SMI completion interrupts. If wait_event_timeout() would return zero, mv643xx_eth would conclude that the SMI access timed out, but this is not necessarily true -- wait_event_timeout() can also return zero in the case where the SMI completion interrupt did happen in time but where it took longer than the requested timeout for the process performing the SMI access to be scheduled again. This would lead to occasional SMI access timeouts when the system would be under heavy load. The fix is to ignore the return value of wait_event_timeout(), and to re-check the SMI done bit after wait_event_timeout() returns to determine whether or not the SMI access timed out. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/mv643xx_eth.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index a9c8c08044b1..b9dcdbd369f8 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1066,9 +1066,12 @@ static int smi_wait_ready(struct mv643xx_eth_shared_private *msp) return 0; } - if (!wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp), - msecs_to_jiffies(100))) - return -ETIMEDOUT; + if (!smi_is_done(msp)) { + wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp), + msecs_to_jiffies(100)); + if (!smi_is_done(msp)) + return -ETIMEDOUT; + } return 0; } -- cgit v1.2.3 From c527c8a7ffa18400c2c1488f7ab5aff5e83f3c8e Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 3 Nov 2008 20:46:21 +0000 Subject: [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error When retrying kernel_recvmsg, reset iov_base and iov_len. Note comment from Sridhar: "In the normal path, iov.iov_len is clearly set to 4. But i think you are running into a case where kernel_recvmsg() is called via 'goto incomplete_rcv' It happens if the previous call fails with EAGAIN. If you want to call recvmsg() after EAGAIN failure, you need to reset iov." Signed-off-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/connect.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index e9f9248cb3fe..c682be8f2984 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -417,9 +417,14 @@ incomplete_rcv: msleep(1); /* minimum sleep to prevent looping allowing socket to clear and app threads to set tcpStatus CifsNeedReconnect if server hung */ - if (pdu_length < 4) + if (pdu_length < 4) { + iov.iov_base = (4 - pdu_length) + + (char *)smb_buffer; + iov.iov_len = pdu_length; + smb_msg.msg_control = NULL; + smb_msg.msg_controllen = 0; goto incomplete_rcv; - else + } else continue; } else if (length <= 0) { if (server->tcpStatus == CifsNew) { -- cgit v1.2.3 From bffadffd43d438c3143b8d172a463de89345b836 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Tue, 28 Oct 2008 14:44:11 +0800 Subject: PCI: fix VPD limit quirk for Broadcom 5708S VPD quirks need to be called after the VPD capability is initialized. Since VPD initialization now runs after pci_fixup_header (due to the capabilities consolidation), VPD quirks should be done at pci_fixup_final stage correspondingly. Tested-by: Eric Dumazet Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bbf66ea8fd87..5049a47030ac 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1692,24 +1692,24 @@ static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev) } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5706, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5706S, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5708, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5708S, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5709, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5709S, - quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709S, + quirk_brcm_570x_limit_vpd); #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting -- cgit v1.2.3 From a7b930cdf8ec790c85f81416c87f7c066679d373 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sun, 2 Nov 2008 13:32:43 -0800 Subject: PCI: annotate return value of pci_ioremap_bar with __iomem Was missing from the initial patch. Acked-by: Arjan van de Ven Signed-off-by: Harvey Harrison Signed-off-by: Jesse Barnes --- include/linux/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/pci.h b/include/linux/pci.h index c75b82bda327..feb4657bb043 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1136,7 +1136,7 @@ static inline void pci_mmcfg_late_init(void) { } #endif #ifdef CONFIG_HAS_IOMEM -static inline void * pci_ioremap_bar(struct pci_dev *pdev, int bar) +static inline void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar) { /* * Make sure the BAR is actually a memory resource, not an IO resource -- cgit v1.2.3 From f5dafca52d366ef8c6c86cbdfecc71a9a78b63a6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 29 Oct 2008 22:35:12 -0700 Subject: PCI: remove excess kernel-doc notation Fix pci/rom.c kernel-doc function notation: Warning(drivers/pci/rom.c:110): Excess function parameter or struct member 'return' description in 'pci_map_rom' Warning(drivers/pci/rom.c:177): Excess function parameter or struct member 'return' description in 'pci_map_rom_copy' Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes --- drivers/pci/rom.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 1f5f6143f35c..132a78159b60 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -100,7 +100,8 @@ size_t pci_get_rom_size(void __iomem *rom, size_t size) * pci_map_rom - map a PCI ROM to kernel space * @pdev: pointer to pci device struct * @size: pointer to receive size of pci window over ROM - * @return: kernel virtual pointer to image of ROM + * + * Return: kernel virtual pointer to image of ROM * * Map a PCI ROM into kernel space. If ROM is boot video ROM, * the shadow BIOS copy will be returned instead of the @@ -167,7 +168,8 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) * pci_map_rom_copy - map a PCI ROM to kernel space, create a copy * @pdev: pointer to pci device struct * @size: pointer to receive size of pci window over ROM - * @return: kernel virtual pointer to image of ROM + * + * Return: kernel virtual pointer to image of ROM * * Map a PCI ROM into kernel space. If ROM is boot video ROM, * the shadow BIOS copy will be returned instead of the -- cgit v1.2.3 From 88e7df0b7ee717f9db3333fb1248827bbdb2d4d3 Mon Sep 17 00:00:00 2001 From: Ed Swierk Date: Mon, 3 Nov 2008 14:41:16 -0800 Subject: PCI: fix range check on mmapped sysfs resource files pci_mmap_fits() returns the wrong answer if the sysfs resource file size is not a multiple of the page size. vm_end and vm_start are already page-aligned, so size - start < nr, causing mmap() to return EINVAL. Signed-off-by: Ed Swierk Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 110022d78689..5d72866897a8 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -575,7 +575,7 @@ static int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; start = vma->vm_pgoff; - size = pci_resource_len(pdev, resno) >> PAGE_SHIFT; + size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1; if (start < size && size - start >= nr) return 1; WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n", -- cgit v1.2.3 From ae2d9fb18e575ed37ffc241ece4bf68f0be4ae32 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 4 Nov 2008 09:10:50 -0500 Subject: ext4: fix missing ext4_unlock_group in error path If we try to free a block which is already freed, the code was returning without first unlocking the group. Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/mballoc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index dfe17a134052..444ad998f72e 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -4441,6 +4441,7 @@ ext4_mb_free_metadata(handle_t *handle, struct ext4_buddy *e4b, else if (block >= (entry->start_blk + entry->count)) n = &(*n)->rb_right; else { + ext4_unlock_group(sb, group); ext4_error(sb, __func__, "Double free of blocks %d (%d %d)\n", block, entry->start_blk, entry->count); -- cgit v1.2.3 From d94e99a64c3beece22dbfb2b335771a59184eb0a Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 4 Nov 2008 09:11:26 -0500 Subject: ext4: Convert to host order before using the values. Use le16_to_cpu to read the s_reserved_gdt_blocks values from super block. Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/super.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 994859df010e..e27acd18b4b0 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1458,9 +1458,8 @@ static int ext4_fill_flex_info(struct super_block *sb) /* We allocate both existing and potentially added groups */ flex_group_count = ((sbi->s_groups_count + groups_per_flex - 1) + - ((sbi->s_es->s_reserved_gdt_blocks +1 ) << - EXT4_DESC_PER_BLOCK_BITS(sb))) / - groups_per_flex; + ((le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) + 1) << + EXT4_DESC_PER_BLOCK_BITS(sb))) / groups_per_flex; sbi->s_flex_groups = kzalloc(flex_group_count * sizeof(struct flex_groups), GFP_KERNEL); if (sbi->s_flex_groups == NULL) { -- cgit v1.2.3 From 14ce0cb411c88681ab8f3a4c9caa7f42e97a3184 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 3 Nov 2008 18:10:55 -0500 Subject: ext4: wait on all pending commits in ext4_sync_fs() In ext4_sync_fs, we only wait for a commit to finish if we started it, but there may be one already in progress which will not be synced. In the case of a data=ordered umount with pending long symlinks which are delayed due to a long list of other I/O on the backing block device, this causes the buffer associated with the long symlinks to not be moved to the inode dirty list in the second phase of fsync_super. Then, before they can be dirtied again, kjournald exits, seeing the UMOUNT flag and the dirty pages are never written to the backing block device, causing long symlink corruption and exposing new or previously freed block data to userspace. To ensure all commits are synced, we flush all journal commits now when sync_fs'ing ext4. Signed-off-by: Arthur Jones Signed-off-by: Andrew Morton Signed-off-by: "Theodore Ts'o" Cc: Eric Sandeen Cc: --- fs/ext4/super.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index e27acd18b4b0..e4a241c65dbe 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2884,12 +2884,9 @@ int ext4_force_commit(struct super_block *sb) /* * Ext4 always journals updates to the superblock itself, so we don't * have to propagate any other updates to the superblock on disk at this - * point. Just start an async writeback to get the buffers on their way - * to the disk. - * - * This implicitly triggers the writebehind on sync(). + * point. (We can probably nuke this function altogether, and remove + * any mention to sb->s_dirt in all of fs/ext4; eventual cleanup...) */ - static void ext4_write_super(struct super_block *sb) { if (mutex_trylock(&sb->s_lock) != 0) @@ -2899,15 +2896,15 @@ static void ext4_write_super(struct super_block *sb) static int ext4_sync_fs(struct super_block *sb, int wait) { - tid_t target; + int ret = 0; trace_mark(ext4_sync_fs, "dev %s wait %d", sb->s_id, wait); sb->s_dirt = 0; - if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, &target)) { - if (wait) - jbd2_log_wait_commit(EXT4_SB(sb)->s_journal, target); - } - return 0; + if (wait) + ret = ext4_force_commit(sb); + else + jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, NULL); + return ret; } /* -- cgit v1.2.3 From 9a0354405feb0f8bd460349a93db05e4cca8d166 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 3 Nov 2008 16:45:55 -0800 Subject: bnx2x: Removing the PMF indication when unloading When the PMF flag is set, the driver can access the HW freely. When the driver is unloaded, it should not access the HW. The problem caused fatal errors when "ethtool -i" was called after the calling instance was unloaded and another instance was already loaded Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index fce745148ff9..61152e149e67 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6481,6 +6481,7 @@ load_int_disable: bnx2x_free_irq(bp); load_error: bnx2x_free_mem(bp); + bp->port.pmf = 0; /* TBD we really need to reset the chip if we want to recover from this */ @@ -6791,6 +6792,7 @@ unload_error: /* Report UNLOAD_DONE to MCP */ if (!BP_NOMCP(bp)) bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE); + bp->port.pmf = 0; /* Free SKBs, SGEs, TPA pool and driver internals */ bnx2x_free_skbs(bp); -- cgit v1.2.3 From 7d96567ac0527703cf1b80043fc0ebd7f21a10ad Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 3 Nov 2008 16:46:19 -0800 Subject: bnx2x: PCI configuration bug on big-endian The current code read nothing but zeros on big-endian (wrong part of the 32bits). This caused poor performance on big-endian machines. Though this issue did not cause the system to crash, the performance is significantly better with the fix so I view it as critical bug fix. Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_init.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index 130927cfc75b..a6c0b3abba29 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -564,14 +564,15 @@ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = { static void bnx2x_init_pxp(struct bnx2x *bp) { + u16 devctl; int r_order, w_order; u32 val, i; pci_read_config_word(bp->pdev, - bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val); - DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val); - w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5); - r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12); + bp->pcie_cap + PCI_EXP_DEVCTL, &devctl); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); + w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); + r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); if (r_order > MAX_RD_ORD) { DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n", -- cgit v1.2.3 From 12b56ea89e70d4b04f2f5199750310e82894ebbd Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 3 Nov 2008 16:46:40 -0800 Subject: bnx2x: Calling netif_carrier_off at the end of the probe netif_carrier_off was called too early at the probe. In case of failure or simply bad timing, this can cause a fatal error since linkwatch_event might run too soon. Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 61152e149e67..5b013d8457c5 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -10206,8 +10206,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, return -ENOMEM; } - netif_carrier_off(dev); - bp = netdev_priv(dev); bp->msglevel = debug; @@ -10231,6 +10229,8 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, goto init_one_exit; } + netif_carrier_off(dev); + bp->common.name = board_info[ent->driver_data].name; printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx," " IRQ %d, ", dev->name, bp->common.name, -- cgit v1.2.3 From ca8eac55fa554043c57fd18d595ca356e752833e Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 3 Nov 2008 16:46:58 -0800 Subject: bnx2x: Version Update Updating the version Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 5b013d8457c5..600210d7eff9 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -59,8 +59,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.22" -#define DRV_MODULE_RELDATE "2008/09/09" +#define DRV_MODULE_VERSION "1.45.23" +#define DRV_MODULE_RELDATE "2008/11/03" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ -- cgit v1.2.3 From 19ecb6ba800765743bb4525c66562f0d30993f8d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 3 Nov 2008 17:05:16 -0800 Subject: niu: Use pci_ioremap_bar(). Signed-off-by: David S. Miller --- drivers/net/niu.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index ebc812702903..9acb5d70a3ae 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -8667,7 +8667,6 @@ static void __devinit niu_device_announce(struct niu *np) static int __devinit niu_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - unsigned long niureg_base, niureg_len; union niu_parent_id parent_id; struct net_device *dev; struct niu *np; @@ -8758,10 +8757,7 @@ static int __devinit niu_pci_init_one(struct pci_dev *pdev, dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM); - niureg_base = pci_resource_start(pdev, 0); - niureg_len = pci_resource_len(pdev, 0); - - np->regs = ioremap_nocache(niureg_base, niureg_len); + np->regs = pci_ioremap_bar(pdev, 0); if (!np->regs) { dev_err(&pdev->dev, PFX "Cannot map device registers, " "aborting.\n"); -- cgit v1.2.3 From bbb770e7ab9a436752babfc8765e422d7481be1f Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 3 Nov 2008 19:11:29 -0800 Subject: xfrm: Fix xfrm_policy_gc_lock handling. From: Alexey Dobriyan Based upon a lockdep trace by Simon Arlott. xfrm_policy_kill() can be called from both BH and non-BH contexts, so we have to grab xfrm_policy_gc_lock with BH disabling. Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 25872747762c..058f04f54b90 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -315,9 +315,9 @@ static void xfrm_policy_kill(struct xfrm_policy *policy) return; } - spin_lock(&xfrm_policy_gc_lock); + spin_lock_bh(&xfrm_policy_gc_lock); hlist_add_head(&policy->bydst, &xfrm_policy_gc_list); - spin_unlock(&xfrm_policy_gc_lock); + spin_unlock_bh(&xfrm_policy_gc_lock); schedule_work(&xfrm_policy_gc_work); } -- cgit v1.2.3 From c2d06fe338912ee56c2ddd7de5574d5396ed8050 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 11 Sep 2008 10:56:00 +0800 Subject: intel_menlow: don't set max_state a negative value max_state is unsigned long. don't set max_state a negative value Cc : Thomas Sujith Cc : Roel Kluin Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/misc/intel_menlow.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c index e00a2756e97e..124b37ddb5c1 100644 --- a/drivers/misc/intel_menlow.c +++ b/drivers/misc/intel_menlow.c @@ -71,6 +71,9 @@ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, if (ACPI_FAILURE(status)) return -EFAULT; + if (!value) + return -EINVAL; + *max_state = value - 1; return 0; } @@ -121,7 +124,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev, if (memory_get_int_max_bandwidth(cdev, &max_state)) return -EFAULT; - if (max_state < 0 || state > max_state) + if (state > max_state) return -EINVAL; arg_list.count = 1; -- cgit v1.2.3 From cadef677e4a9b9c1d069675043767df486782986 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Fri, 31 Oct 2008 08:03:55 +0100 Subject: sata_promise: add ATA engine reset to reset ops Promise ATA engines need to be reset when errors occur. That's currently done for errors detected by sata_promise itself, but it's not done for errors like timeouts detected outside of the low-level driver. The effect of this omission is that a timeout tends to result in a sequence of failed COMRESETs after which libata EH gives up and disables the port. At that point the port's ATA engine hangs and even reloading the driver will not resume it. To fix this, make sata_promise override ->hardreset on SATA ports with code which calls pdc_reset_port() on the port in question before calling libata's hardreset. PATA ports don't use ->hardreset, so for those we override ->softreset instead. Signed-off-by: Mikael Pettersson Signed-off-by: Jeff Garzik --- drivers/ata/sata_promise.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 750d8cdc00cd..ba9a2570a742 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -153,6 +153,10 @@ static void pdc_freeze(struct ata_port *ap); static void pdc_sata_freeze(struct ata_port *ap); static void pdc_thaw(struct ata_port *ap); static void pdc_sata_thaw(struct ata_port *ap); +static int pdc_pata_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void pdc_error_handler(struct ata_port *ap); static void pdc_post_internal_cmd(struct ata_queued_cmd *qc); static int pdc_pata_cable_detect(struct ata_port *ap); @@ -186,6 +190,7 @@ static struct ata_port_operations pdc_sata_ops = { .scr_read = pdc_sata_scr_read, .scr_write = pdc_sata_scr_write, .port_start = pdc_sata_port_start, + .hardreset = pdc_sata_hardreset, }; /* First-generation chips need a more restrictive ->check_atapi_dma op */ @@ -200,6 +205,7 @@ static struct ata_port_operations pdc_pata_ops = { .freeze = pdc_freeze, .thaw = pdc_thaw, .port_start = pdc_common_port_start, + .softreset = pdc_pata_softreset, }; static const struct ata_port_info pdc_port_info[] = { @@ -693,6 +699,20 @@ static void pdc_sata_thaw(struct ata_port *ap) readl(host_mmio + hotplug_offset); /* flush */ } +static int pdc_pata_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + pdc_reset_port(link->ap); + return ata_sff_softreset(link, class, deadline); +} + +static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + pdc_reset_port(link->ap); + return sata_sff_hardreset(link, class, deadline); +} + static void pdc_error_handler(struct ata_port *ap) { if (!(ap->pflags & ATA_PFLAG_FROZEN)) -- cgit v1.2.3 From 554d491de112a378b4d1a705bb93b58bcd444a70 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 2 Nov 2008 22:18:52 +0100 Subject: sata_via: restore vt*_prepare_host error handling commit b9d5b89b487517cbd4cb4702da829e07ef9e4432 (sata_via: fix support for 5287) accidently (?) removed vt*_prepare_host error handling - restore it catched by gcc: drivers/ata/sata_via.c: In function 'svia_init_one': drivers/ata/sata_via.c:567: warning: 'host' may be used uninitialized in this function Signed-off-by: Marcin Slusarz Cc: Tejun Heo Cc: Joseph Chan Cc: Jeff Garzik Signed-off-by: Jeff Garzik --- drivers/ata/sata_via.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 62367fe4d5dc..c18935f0bda2 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -602,8 +602,10 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) rc = vt8251_prepare_host(pdev, &host); break; default: - return -EINVAL; + rc = -EINVAL; } + if (rc) + return rc; svia_configure(pdev); -- cgit v1.2.3 From 3c324283e6cdb79210cf7975c3e40d3ba3e672b2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Nov 2008 12:37:49 +0900 Subject: sata_nv: fix generic, nf2/3 detection regression All three flavors of sata_nv's are different in how their hardreset behaves. * generic: Hardreset is not reliable. Link often doesn't come online after hardreset. * nf2/3: A little bit better - link comes online with longer debounce timing. However, nf2/3 can't reliable wait for the first D2H Register FIS, so it can't wait for device readiness or classify the device after hardreset. Follow-up SRST required. * ck804: Hardreset finally works. The core layer change to prefer hardreset and follow up changes exposed the above issues and caused various detection regressions for all three flavors. This patch, hopefully, fixes all the known issues and should make sata_nv error handling more reliable. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 53 ++++++++++++++++++++++++--------------------------- 1 file changed, 25 insertions(+), 28 deletions(-) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index fae3841de0d8..6f1460614325 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -307,10 +307,10 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); +static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void nv_ck804_freeze(struct ata_port *ap); static void nv_ck804_thaw(struct ata_port *ap); -static int nv_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); static int nv_adma_slave_config(struct scsi_device *sdev); static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc); static void nv_adma_qc_prep(struct ata_queued_cmd *qc); @@ -405,17 +405,8 @@ static struct scsi_host_template nv_swncq_sht = { .slave_configure = nv_swncq_slave_config, }; -/* OSDL bz3352 reports that some nv controllers can't determine device - * signature reliably and nv_hardreset is implemented to work around - * the problem. This was reported on nf3 and it's unclear whether any - * other controllers are affected. However, the workaround has been - * applied to all variants and there isn't much to gain by trying to - * find out exactly which ones are affected at this point especially - * because NV has moved over to ahci for newer controllers. - */ static struct ata_port_operations nv_common_ops = { .inherits = &ata_bmdma_port_ops, - .hardreset = nv_hardreset, .scr_read = nv_scr_read, .scr_write = nv_scr_write, }; @@ -429,12 +420,22 @@ static struct ata_port_operations nv_generic_ops = { .hardreset = ATA_OP_NULL, }; +/* OSDL bz3352 reports that nf2/3 controllers can't determine device + * signature reliably. Also, the following thread reports detection + * failure on cold boot with the standard debouncing timing. + * + * http://thread.gmane.org/gmane.linux.ide/34098 + * + * Debounce with hotplug timing and request follow-up SRST. + */ static struct ata_port_operations nv_nf2_ops = { .inherits = &nv_common_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, + .hardreset = nv_nf2_hardreset, }; +/* CK804 finally gets hardreset right */ static struct ata_port_operations nv_ck804_ops = { .inherits = &nv_common_ops, .freeze = nv_ck804_freeze, @@ -443,7 +444,7 @@ static struct ata_port_operations nv_ck804_ops = { }; static struct ata_port_operations nv_adma_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_ck804_ops, .check_atapi_dma = nv_adma_check_atapi_dma, .sff_tf_read = nv_adma_tf_read, @@ -467,7 +468,7 @@ static struct ata_port_operations nv_adma_ops = { }; static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_generic_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -1553,6 +1554,17 @@ static void nv_nf2_thaw(struct ata_port *ap) iowrite8(mask, scr_addr + NV_INT_ENABLE); } +static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + bool online; + int rc; + + rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + &online, NULL); + return online ? -EAGAIN : rc; +} + static void nv_ck804_freeze(struct ata_port *ap) { void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; @@ -1605,21 +1617,6 @@ static void nv_mcp55_thaw(struct ata_port *ap) ata_sff_thaw(ap); } -static int nv_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - int rc; - - /* SATA hardreset fails to retrieve proper device signature on - * some controllers. Request follow up SRST. For more info, - * see http://bugzilla.kernel.org/show_bug.cgi?id=3352 - */ - rc = sata_sff_hardreset(link, class, deadline); - if (rc) - return rc; - return -EAGAIN; -} - static void nv_adma_error_handler(struct ata_port *ap) { struct nv_adma_port_priv *pp = ap->private_data; -- cgit v1.2.3 From a464189de350b050aa8f334bd4cc53ed406e56dd Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Mon, 3 Nov 2008 19:01:08 +0900 Subject: libata: Fix a potential race condition in ata_scsi_park_show() Peter Moulder has pointed out that there is a slight chance that a negative value might be passed to jiffies_to_msecs() in ata_scsi_park_show(). This is fixed by saving the value of jiffies in a local variable, thus also reducing code since the volatile variable jiffies is accessed only once. Signed-off-by: Elias Oltmanns Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index bbb30d882f05..3fa75eac135d 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -190,7 +190,7 @@ static ssize_t ata_scsi_park_show(struct device *device, struct ata_port *ap; struct ata_link *link; struct ata_device *dev; - unsigned long flags; + unsigned long flags, now; unsigned int uninitialized_var(msecs); int rc = 0; @@ -208,10 +208,11 @@ static ssize_t ata_scsi_park_show(struct device *device, } link = dev->link; + now = jiffies; if (ap->pflags & ATA_PFLAG_EH_IN_PROGRESS && link->eh_context.unloaded_mask & (1 << dev->devno) && - time_after(dev->unpark_deadline, jiffies)) - msecs = jiffies_to_msecs(dev->unpark_deadline - jiffies); + time_after(dev->unpark_deadline, now)) + msecs = jiffies_to_msecs(dev->unpark_deadline - now); else msecs = 0; -- cgit v1.2.3 From 6a87e42e955ff27e07a77f65f8f077dc7c4171e1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Nov 2008 19:01:09 +0900 Subject: libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it libata always uses PIO for ATAPI commands when the number of bytes to transfer isn't multiple of 16 but quantum DAT72 chokes on odd bytes PIO transfers. Implement a horkage to skip the mod16 check and apply it to the quantum device. This is reported by John Clark in the following thread. http://thread.gmane.org/gmane.linux.ide/34748 Signed-off-by: Tejun Heo Cc: John Clark Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 +++- include/linux/libata.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 82af7011f2dd..91b478f20557 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4024,6 +4024,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, + { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA }, /* Devices we expect to fail diagnostics */ @@ -4444,7 +4445,8 @@ int atapi_check_dma(struct ata_queued_cmd *qc) /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a * few ATAPI devices choke on such DMA requests. */ - if (unlikely(qc->nbytes & 15)) + if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) && + unlikely(qc->nbytes & 15)) return 1; if (ap->ops->check_atapi_dma) diff --git a/include/linux/libata.h b/include/linux/libata.h index f5441edee55f..c7665a4134c5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -373,6 +373,8 @@ enum { ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */ ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */ ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ + ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands + not multiple of 16 bytes */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3 From 299246f9a2a4c5c531863d72bad7ebd0de213de9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Nov 2008 19:27:07 +0900 Subject: libata: mask off DET when restoring SControl for detach libata restores SControl on detach; however, trying to restore non-zero DET can cause undeterministic behavior including PMP device going offline till power cycling. Mask off DET when restoring SControl. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 91b478f20557..622350d9b2e3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5936,7 +5936,7 @@ static void ata_port_detach(struct ata_port *ap) * to us. Restore SControl and disable all existing devices. */ __ata_port_for_each_link(link, ap) { - sata_scr_write(link, SCR_CONTROL, link->saved_scontrol); + sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0); ata_link_for_each_dev(dev, link) ata_dev_disable(dev); } -- cgit v1.2.3 From 70de9a97049e0ba79dc040868564408d5ce697f9 Mon Sep 17 00:00:00 2001 From: Alok Kataria Date: Mon, 3 Nov 2008 11:18:47 -0800 Subject: x86: don't use tsc_khz to calculate lpj if notsc is passed Impact: fix udelay when "notsc" boot parameter is passed With notsc passed on commandline, tsc may not be used for udelays, make sure that we do not use tsc_khz to calculate the lpj value in such cases. Reported-by: Bartlomiej Zolnierkiewicz Signed-off-by: Alok N Kataria Cc: Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 62348e4fd8d1..2ef80e301925 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -813,10 +813,6 @@ void __init tsc_init(void) cpu_khz = calibrate_cpu(); #endif - lpj = ((u64)tsc_khz * 1000); - do_div(lpj, HZ); - lpj_fine = lpj; - printk("Detected %lu.%03lu MHz processor.\n", (unsigned long)cpu_khz / 1000, (unsigned long)cpu_khz % 1000); @@ -836,6 +832,10 @@ void __init tsc_init(void) /* now allow native_sched_clock() to use rdtsc */ tsc_disabled = 0; + lpj = ((u64)tsc_khz * 1000); + do_div(lpj, HZ); + lpj_fine = lpj; + use_tsc_delay(); /* Check and install the TSC clocksource */ dmi_check_system(bad_tsc_dmi_table); -- cgit v1.2.3 From 9b803c0fc37dc49d06d99d63741e78274801c644 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 3 Nov 2008 15:15:08 -0500 Subject: ftrace: update txt document Impact: Documentation update only A lot of changes have gone into ftrace. This patch updates the ftrace.txt document. Signed-off-by: Steven Rostedt Acked-by: Randy Dunlap Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 169 ++++++++++++++++++++--------------------------- 1 file changed, 72 insertions(+), 97 deletions(-) diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index ea5a827395dd..0cb989cd5124 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -50,26 +50,26 @@ of ftrace. Here is a list of some of the key files: Note: all time values are in microseconds. - current_tracer : This is used to set or display the current tracer + current_tracer: This is used to set or display the current tracer that is configured. - available_tracers : This holds the different types of tracers that + available_tracers: This holds the different types of tracers that have been compiled into the kernel. The tracers listed here can be configured by echoing their name into current_tracer. - tracing_enabled : This sets or displays whether the current_tracer + tracing_enabled: This sets or displays whether the current_tracer is activated and tracing or not. Echo 0 into this file to disable the tracer or 1 to enable it. - trace : This file holds the output of the trace in a human readable + trace: This file holds the output of the trace in a human readable format (described below). - latency_trace : This file shows the same trace but the information + latency_trace: This file shows the same trace but the information is organized more to display possible latencies in the system (described below). - trace_pipe : The output is the same as the "trace" file but this + trace_pipe: The output is the same as the "trace" file but this file is meant to be streamed with live tracing. Reads from this file will block until new data is retrieved. Unlike the "trace" and "latency_trace" @@ -82,11 +82,11 @@ of ftrace. Here is a list of some of the key files: tracer is not adding more data, they will display the same information every time they are read. - iter_ctrl : This file lets the user control the amount of data + iter_ctrl: This file lets the user control the amount of data that is displayed in one of the above output files. - trace_max_latency : Some of the tracers record the max latency. + trace_max_latency: Some of the tracers record the max latency. For example, the time interrupts are disabled. This time is saved in this file. The max trace will also be stored, and displayed by either @@ -94,29 +94,26 @@ of ftrace. Here is a list of some of the key files: only be recorded if the latency is greater than the value in this file. (in microseconds) - trace_entries : This sets or displays the number of trace - entries each CPU buffer can hold. The tracer buffers - are the same size for each CPU. The displayed number - is the size of the CPU buffer and not total size. The + trace_entries: This sets or displays the number of bytes each CPU + buffer can hold. The tracer buffers are the same size + for each CPU. The displayed number is the size of the + CPU buffer and not total size of all buffers. The trace buffers are allocated in pages (blocks of memory that the kernel uses for allocation, usually 4 KB in size). - Since each entry is smaller than a page, if the last - allocated page has room for more entries than were - requested, the rest of the page is used to allocate - entries. + If the last page allocated has room for more bytes + than requested, the rest of the page will be used, + making the actual allocation bigger than requested. + (Note, the size may not be a multiple of the page size due + to buffer managment overhead.) This can only be updated when the current_tracer - is set to "none". + is set to "nop". - NOTE: It is planned on changing the allocated buffers - from being the number of possible CPUS to - the number of online CPUS. - - tracing_cpumask : This is a mask that lets the user only trace + tracing_cpumask: This is a mask that lets the user only trace on specified CPUS. The format is a hex string representing the CPUS. - set_ftrace_filter : When dynamic ftrace is configured in (see the + set_ftrace_filter: When dynamic ftrace is configured in (see the section below "dynamic ftrace"), the code is dynamically modified (code text rewrite) to disable calling of the function profiler (mcount). This lets tracing be configured @@ -130,14 +127,11 @@ of ftrace. Here is a list of some of the key files: be traced. If a function exists in both set_ftrace_filter and set_ftrace_notrace, the function will _not_ be traced. - available_filter_functions : When a function is encountered the first - time by the dynamic tracer, it is recorded and - later the call is converted into a nop. This file - lists the functions that have been recorded - by the dynamic tracer and these functions can - be used to set the ftrace filter by the above - "set_ftrace_filter" file. (See the section "dynamic ftrace" - below for more details). + available_filter_functions: This lists the functions that ftrace + has processed and can trace. These are the function + names that you can pass to "set_ftrace_filter" or + "set_ftrace_notrace". (See the section "dynamic ftrace" + below for more details.) The Tracers @@ -145,7 +139,7 @@ The Tracers Here is the list of current tracers that may be configured. - ftrace - function tracer that uses mcount to trace all functions. + function - function tracer that uses mcount to trace all functions. sched_switch - traces the context switches between tasks. @@ -166,8 +160,8 @@ Here is the list of current tracers that may be configured. the highest priority task to get scheduled after it has been woken up. - none - This is not a tracer. To remove all tracers from tracing - simply echo "none" into current_tracer. + nop - This is not a tracer. To remove all tracers from tracing + simply echo "nop" into current_tracer. Examples of using the tracer @@ -182,7 +176,7 @@ Output format: Here is an example of the output format of the file "trace" -------- -# tracer: ftrace +# tracer: function # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | @@ -192,7 +186,7 @@ Here is an example of the output format of the file "trace" -------- A header is printed with the tracer name that is represented by the trace. -In this case the tracer is "ftrace". Then a header showing the format. Task +In this case the tracer is "function". Then a header showing the format. Task name "bash", the task PID "4251", the CPU that it was running on "01", the timestamp in . format, the function name that was traced "path_put" and the parent function that called this function @@ -1003,22 +997,20 @@ is the stack for the hard interrupt. This hides the fact that NEED_RESCHED has been set. We do not see the 'N' until we switch back to the task's assigned stack. -ftrace ------- +function +-------- -ftrace is not only the name of the tracing infrastructure, but it -is also a name of one of the tracers. The tracer is the function -tracer. Enabling the function tracer can be done from the -debug file system. Make sure the ftrace_enabled is set otherwise -this tracer is a nop. +This tracer is the function tracer. Enabling the function tracer +can be done from the debug file system. Make sure the ftrace_enabled is +set; otherwise this tracer is a nop. # sysctl kernel.ftrace_enabled=1 - # echo ftrace > /debug/tracing/current_tracer + # echo function > /debug/tracing/current_tracer # echo 1 > /debug/tracing/tracing_enabled # usleep 1 # echo 0 > /debug/tracing/tracing_enabled # cat /debug/tracing/trace -# tracer: ftrace +# tracer: function # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | @@ -1040,10 +1032,10 @@ this tracer is a nop. [...] -Note: ftrace uses ring buffers to store the above entries. The newest data -may overwrite the oldest data. Sometimes using echo to stop the trace -is not sufficient because the tracing could have overwritten the data -that you wanted to record. For this reason, it is sometimes better to +Note: function tracer uses ring buffers to store the above entries. +The newest data may overwrite the oldest data. Sometimes using echo to +stop the trace is not sufficient because the tracing could have overwritten +the data that you wanted to record. For this reason, it is sometimes better to disable tracing directly from a program. This allows you to stop the tracing at the point that you hit the part that you are interested in. To disable the tracing directly from a C program, something like following @@ -1077,18 +1069,31 @@ every kernel function, produced by the -pg switch in gcc), starts of pointing to a simple return. (Enabling FTRACE will include the -pg switch in the compiling of the kernel.) -When dynamic ftrace is initialized, it calls kstop_machine to make -the machine act like a uniprocessor so that it can freely modify code -without worrying about other processors executing that same code. At -initialization, the mcount calls are changed to call a "record_ip" -function. After this, the first time a kernel function is called, -it has the calling address saved in a hash table. - -Later on the ftraced kernel thread is awoken and will again call -kstop_machine if new functions have been recorded. The ftraced thread -will change all calls to mcount to "nop". Just calling mcount -and having mcount return has shown a 10% overhead. By converting -it to a nop, there is no measurable overhead to the system. +At compile time every C file object is run through the +recordmcount.pl script (located in the scripts directory). This +script will process the C object using objdump to find all the +locations in the .text section that call mcount. (Note, only +the .text section is processed, since processing other sections +like .init.text may cause races due to those sections being freed). + +A new section called "__mcount_loc" is created that holds references +to all the mcount call sites in the .text section. This section is +compiled back into the original object. The final linker will add +all these references into a single table. + +On boot up, before SMP is initialized, the dynamic ftrace code +scans this table and updates all the locations into nops. It also +records the locations, which are added to the available_filter_functions +list. Modules are processed as they are loaded and before they are +executed. When a module is unloaded, it also removes its functions from +the ftrace function list. This is automatic in the module unload +code, and the module author does not need to worry about it. + +When tracing is enabled, kstop_machine is called to prevent races +with the CPUS executing code being modified (which can cause the +CPU to do undesireable things), and the nops are patched back +to calls. But this time, they do not call mcount (which is just +a function stub). They now call into the ftrace infrastructure. One special side-effect to the recording of the functions being traced is that we can now selectively choose which functions we @@ -1251,36 +1256,6 @@ Produces: We can see that there's no more lock or preempt tracing. -ftraced -------- - -As mentioned above, when dynamic ftrace is configured in, a kernel -thread wakes up once a second and checks to see if there are mcount -calls that need to be converted into nops. If there are not any, then -it simply goes back to sleep. But if there are some, it will call -kstop_machine to convert the calls to nops. - -There may be a case in which you do not want this added latency. -Perhaps you are doing some audio recording and this activity might -cause skips in the playback. There is an interface to disable -and enable the "ftraced" kernel thread. - - # echo 0 > /debug/tracing/ftraced_enabled - -This will disable the calling of kstop_machine to update the -mcount calls to nops. Remember that there is a large overhead -to calling mcount. Without this kernel thread, that overhead will -exist. - -If there are recorded calls to mcount, any write to the ftraced_enabled -file will cause the kstop_machine to run. This means that a -user can manually perform the updates when they want to by simply -echoing a '0' into the ftraced_enabled file. - -The updates are also done at the beginning of enabling a tracer -that uses ftrace function recording. - - trace_pipe ---------- @@ -1289,14 +1264,14 @@ on the tracing is different. Every read from trace_pipe is consumed. This means that subsequent reads will be different. The trace is live. - # echo ftrace > /debug/tracing/current_tracer + # echo function > /debug/tracing/current_tracer # cat /debug/tracing/trace_pipe > /tmp/trace.out & [1] 4153 # echo 1 > /debug/tracing/tracing_enabled # usleep 1 # echo 0 > /debug/tracing/tracing_enabled # cat /debug/tracing/trace -# tracer: ftrace +# tracer: function # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | @@ -1317,7 +1292,7 @@ is live. Note, reading the trace_pipe file will block until more input is added. By changing the tracer, trace_pipe will issue an EOF. We needed -to set the ftrace tracer _before_ cating the trace_pipe file. +to set the function tracer _before_ we "cat" the trace_pipe file. trace entries @@ -1334,10 +1309,10 @@ number of entries. 65620 Note, to modify this, you must have tracing completely disabled. To do that, -echo "none" into the current_tracer. If the current_tracer is not set -to "none", an EINVAL error will be returned. +echo "nop" into the current_tracer. If the current_tracer is not set +to "nop", an EINVAL error will be returned. - # echo none > /debug/tracing/current_tracer + # echo nop > /debug/tracing/current_tracer # echo 100000 > /debug/tracing/trace_entries # cat /debug/tracing/trace_entries 100045 -- cgit v1.2.3 From 42ec632e7b0185d3776aa5d23380cbdc963151f2 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 3 Nov 2008 15:18:56 -0500 Subject: ftrace: ftrace.txt version update Impact: Documentation update only Update the version that the ftrace document was written for. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 0cb989cd5124..9cc4d685dde5 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -8,7 +8,7 @@ Copyright 2008 Red Hat Inc. Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, John Kacur, and David Teigland. -Written for: 2.6.27-rc1 +Written for: 2.6.28-rc2 Introduction ------------ -- cgit v1.2.3 From c4dc5071859bf666a5a9d6565f16c51a261a88b7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 4 Nov 2008 13:30:57 +0100 Subject: ALSA: hda - Limit the number of GPIOs show in proc Limit the number of GPIOs shown in proc. Otherwise it gets too long unnecessarily, and hard to analyze. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_proc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c index 743d77922bce..c39af986bff1 100644 --- a/sound/pci/hda/hda_proc.c +++ b/sound/pci/hda/hda_proc.c @@ -483,6 +483,8 @@ static void print_gpio(struct snd_info_buffer *buffer, (gpio & AC_GPIO_UNSOLICITED) ? 1 : 0, (gpio & AC_GPIO_WAKE) ? 1 : 0); max = gpio & AC_GPIO_IO_COUNT; + if (!max || max > 8) + return; enable = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_GPIO_MASK, 0); direction = snd_hda_codec_read(codec, nid, 0, -- cgit v1.2.3 From e4ab1b3cbb8042f1653471c6333931134105d455 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Tue, 4 Nov 2008 12:46:03 +0000 Subject: x86/docs: remove noirqbalance param docs Impact: documentation fix irqbalance was removed by: commit 8b8e8c1bf7275eca859fe551dfa484134eaf013b Author: Yinghai Lu Date: Tue Aug 19 20:50:23 2008 -0700 Remove the associated documentation for noirqbalance. Signed-off-by: Mark McLoughlin Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1bbcaa8982b6..de4de3e7bc1b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1470,8 +1470,6 @@ and is between 256 and 4096 characters. It is defined in the file Valid arguments: on, off Default: on - noirqbalance [X86-32,SMP,KNL] Disable kernel irq balancing - noirqdebug [X86-32] Disables the code which attempts to detect and disable unhandled interrupt sources. -- cgit v1.2.3 From d2ed5cb80a241518dd71f467c884bfabbe15f68c Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 2 Nov 2008 09:16:50 +0000 Subject: [ARM] fix VFP+softfloat binaries 2.6.28-rc tightened up the ELF architecture checks on ARM. For non-EABI it only allows VFP if the hardware supports it. However, the kernel fails to also inspect the soft-float flag, so it incorrectly rejects binaries using soft-VFP. The fix is simple: also check that EF_ARM_SOFT_FLOAT isn't set before rejecting VFP binaries on non-VFP hardware. Acked-by: Mikael Pettersson Signed-off-by: Russell King --- arch/arm/kernel/elf.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index 513f332f040d..84849098c8e8 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -21,12 +21,16 @@ int elf_check_arch(const struct elf32_hdr *x) eflags = x->e_flags; if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) { + unsigned int flt_fmt; + /* APCS26 is only allowed if the CPU supports it */ if ((eflags & EF_ARM_APCS_26) && !(elf_hwcap & HWCAP_26BIT)) return 0; + flt_fmt = eflags & (EF_ARM_VFP_FLOAT | EF_ARM_SOFT_FLOAT); + /* VFP requires the supporting code */ - if ((eflags & EF_ARM_VFP_FLOAT) && !(elf_hwcap & HWCAP_VFP)) + if (flt_fmt == EF_ARM_VFP_FLOAT && !(elf_hwcap & HWCAP_VFP)) return 0; } return 1; -- cgit v1.2.3 From 54074d59320581a6d7e4f4dd405e8cac1d174b75 Mon Sep 17 00:00:00 2001 From: Jianjun Kong Date: Tue, 4 Nov 2008 21:47:07 +0800 Subject: drivers: remove duplicated #include Signed-off-by: Jianjun Kong Signed-off-by: Linus Torvalds --- drivers/mtd/onenand/omap2.c | 1 - drivers/net/atl1e/atl1e.h | 1 - drivers/net/ucc_geth_ethtool.c | 1 - drivers/pnp/interface.c | 1 - drivers/sbus/char/jsflash.c | 1 - drivers/staging/echo/echo.c | 1 - drivers/staging/me4000/me4000.c | 1 - drivers/xen/balloon.c | 1 - 8 files changed, 8 deletions(-) diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 8387e05daae2..e39b21d3e168 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/atl1e/atl1e.h index b645fa0f3f64..c49550d507a0 100644 --- a/drivers/net/atl1e/atl1e.h +++ b/drivers/net/atl1e/atl1e.h @@ -46,7 +46,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index cfbbfee55836..85f38a6b6a49 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -37,7 +37,6 @@ #include #include #include -#include #include "ucc_geth.h" #include "ucc_geth_mii.h" diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index 478a4a739c00..c3f1c8e9d254 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index 2bec9ccc0293..a9a9893a5f95 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include diff --git a/drivers/staging/echo/echo.c b/drivers/staging/echo/echo.c index b8f2c5e9dee5..fd4007e329e7 100644 --- a/drivers/staging/echo/echo.c +++ b/drivers/staging/echo/echo.c @@ -106,7 +106,6 @@ #include /* We're doing kernel work */ #include -#include #include #include "bit_operations.h" diff --git a/drivers/staging/me4000/me4000.c b/drivers/staging/me4000/me4000.c index cf8b01bcac8d..0394e2709278 100644 --- a/drivers/staging/me4000/me4000.c +++ b/drivers/staging/me4000/me4000.c @@ -39,7 +39,6 @@ #include #include #include -#include /* Include-File for the Meilhaus ME-4000 I/O board */ #include "me4000.h" diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 8c83abc73400..a0fb5eac407c 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From 7b0f5df4c88bac46fe749d36d905fc7ad0296587 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 4 Nov 2008 11:18:56 -0800 Subject: mlx4_core: Fix unused variable warning Fix drivers/net/mlx4/profile.c:55: warning: 'res_name' defined but not used by making mlx4_dbg() always use all of its parameters, regardless of whether CONFIG_MLX4_DEBUG is set or not. Reported-by: Alexander Beregalov Signed-off-by: Roland Dreier --- drivers/net/mlx4/mlx4.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index fa431fad0eec..56a2e213fe62 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -87,6 +87,9 @@ enum { #ifdef CONFIG_MLX4_DEBUG extern int mlx4_debug_level; +#else /* CONFIG_MLX4_DEBUG */ +#define mlx4_debug_level (0) +#endif /* CONFIG_MLX4_DEBUG */ #define mlx4_dbg(mdev, format, arg...) \ do { \ @@ -94,12 +97,6 @@ extern int mlx4_debug_level; dev_printk(KERN_DEBUG, &mdev->pdev->dev, format, ## arg); \ } while (0) -#else /* CONFIG_MLX4_DEBUG */ - -#define mlx4_dbg(mdev, format, arg...) do { (void) mdev; } while (0) - -#endif /* CONFIG_MLX4_DEBUG */ - #define mlx4_err(mdev, format, arg...) \ dev_err(&mdev->pdev->dev, format, ## arg) #define mlx4_info(mdev, format, arg...) \ -- cgit v1.2.3 From 9ac8d3fb22b593d39d161dcd716af0f1f7546837 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 3 Nov 2008 16:58:51 -0600 Subject: [IA64] Simplify SGI uv vs. sn2 driver issues Add partition id, coherence id, and region size to UV to make life simpler for drivers shared between sn2 & uv. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/uv/kernel/setup.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c index cf5f28ae96c4..7a5ae633198b 100644 --- a/arch/ia64/uv/kernel/setup.c +++ b/arch/ia64/uv/kernel/setup.c @@ -19,6 +19,12 @@ EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info); #ifdef CONFIG_IA64_SGI_UV int sn_prom_type; +long sn_partition_id; +EXPORT_SYMBOL(sn_partition_id); +long sn_coherency_id; +EXPORT_SYMBOL_GPL(sn_coherency_id); +long sn_region_size; +EXPORT_SYMBOL(sn_region_size); #endif struct redir_addr { -- cgit v1.2.3 From 7576f684494e927b901eee25a44ce52c82f9f60e Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 3 Nov 2008 13:29:41 -0800 Subject: [IA64] Add UV watchlist support. This is used by SGI xp drivers (drivers/misc/sgi-xp). Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/include/asm/sn/sn_sal.h | 45 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h index 57e649d388b8..e310fc0135dc 100644 --- a/arch/ia64/include/asm/sn/sn_sal.h +++ b/arch/ia64/include/asm/sn/sn_sal.h @@ -90,6 +90,8 @@ #define SN_SAL_SET_CPU_NUMBER 0x02000068 #define SN_SAL_KERNEL_LAUNCH_EVENT 0x02000069 +#define SN_SAL_WATCHLIST_ALLOC 0x02000070 +#define SN_SAL_WATCHLIST_FREE 0x02000071 /* * Service-specific constants @@ -1185,4 +1187,47 @@ ia64_sn_kernel_launch_event(void) SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0); return rv.status; } + +union sn_watchlist_u { + u64 val; + struct { + u64 blade : 16, + size : 32, + filler : 16; + }; +}; + +static inline int +sn_mq_watchlist_alloc(int blade, void *mq, unsigned int mq_size, + unsigned long *intr_mmr_offset) +{ + struct ia64_sal_retval rv; + unsigned long addr; + union sn_watchlist_u size_blade; + int watchlist; + + addr = (unsigned long)mq; + size_blade.size = mq_size; + size_blade.blade = blade; + + /* + * bios returns watchlist number or negative error number. + */ + ia64_sal_oemcall_nolock(&rv, SN_SAL_WATCHLIST_ALLOC, addr, + size_blade.val, (u64)intr_mmr_offset, + (u64)&watchlist, 0, 0, 0); + if (rv.status < 0) + return rv.status; + + return watchlist; +} + +static inline int +sn_mq_watchlist_free(int blade, int watchlist_num) +{ + struct ia64_sal_retval rv; + ia64_sal_oemcall_nolock(&rv, SN_SAL_WATCHLIST_FREE, blade, + watchlist_num, 0, 0, 0, 0, 0); + return rv.status; +} #endif /* _ASM_IA64_SN_SN_SAL_H */ -- cgit v1.2.3 From d6e15199d1784df90b7535e625f7617bd343d202 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 3 Nov 2008 13:32:23 -0800 Subject: [IA64] Add error_recovery_info field to SAL section header Add the error_recovery_info field to the SAL section header, as defined in the SAL Spec. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/include/asm/sal.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/ia64/include/asm/sal.h b/arch/ia64/include/asm/sal.h index ea310c0812aa..966797a97c94 100644 --- a/arch/ia64/include/asm/sal.h +++ b/arch/ia64/include/asm/sal.h @@ -337,11 +337,24 @@ typedef struct sal_log_record_header { #define sal_log_severity_fatal 1 #define sal_log_severity_corrected 2 +/* + * Error Recovery Info (ERI) bit decode. From SAL Spec section B.2.2 Table B-3 + * Error Section Error_Recovery_Info Field Definition. + */ +#define ERI_NOT_VALID 0x0 /* Error Recovery Field is not valid */ +#define ERI_NOT_ACCESSIBLE 0x30 /* Resource not accessible */ +#define ERI_CONTAINMENT_WARN 0x22 /* Corrupt data propagated */ +#define ERI_UNCORRECTED_ERROR 0x20 /* Uncorrected error */ +#define ERI_COMPONENT_RESET 0x24 /* Component must be reset */ +#define ERI_CORR_ERROR_LOG 0x21 /* Corrected error, needs logging */ +#define ERI_CORR_ERROR_THRESH 0x29 /* Corrected error threshold exceeded */ + /* Definition of log section header structures */ typedef struct sal_log_sec_header { efi_guid_t guid; /* Unique Section ID */ sal_log_revision_t revision; /* Major and Minor revision of Section */ - u16 reserved; + u8 error_recovery_info; /* Platform error recovery status */ + u8 reserved; u32 len; /* Section length */ } sal_log_section_hdr_t; -- cgit v1.2.3 From aca14f33104bb7b101df23cdd36c520b7c66bcfd Mon Sep 17 00:00:00 2001 From: Ken'ichi Ohmichi Date: Wed, 29 Oct 2008 14:17:57 -0700 Subject: [IA64] fix the difference between node_mem_map and node_start_pfn makedumpfile[1] cannot run on ia64 discontigmem kernel, because the member node_mem_map of struct pgdat_list has invalid value. This patch fixes it. node_start_pfn shows the start pfn of each node, and node_mem_map should point 'struct page' of each node's node_start_pfn. On my machine, node0's node_start_pfn shows 0x400 and its node_mem_map points 0xa0007fffbf000000. This address is the same as vmem_map, so the node_mem_map points 'struct page' of pfn 0, even if its node_start_pfn shows 0x400. The cause is due to the round down of min_pfn in count_node_pages() and node0's node_mem_map points 'struct page' of inactive pfn (0x0). This patch fixes it. makedumpfile[1]: dump filtering command https://sourceforge.net/projects/makedumpfile/ Signed-off-by: Ken'ichi Ohmichi Cc: Bernhard Walle Cc: Jay Lan Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/include/asm/meminit.h | 1 - arch/ia64/mm/discontig.c | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h index 6bc96ee54327..c0cea375620a 100644 --- a/arch/ia64/include/asm/meminit.h +++ b/arch/ia64/include/asm/meminit.h @@ -48,7 +48,6 @@ extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end); */ #define GRANULEROUNDDOWN(n) ((n) & ~(IA64_GRANULE_SIZE-1)) #define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1)) -#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<>PAGE_SHIFT; #endif start = GRANULEROUNDDOWN(start); - start = ORDERROUNDDOWN(start); end = GRANULEROUNDUP(end); mem_data[node].max_pfn = max(mem_data[node].max_pfn, end >> PAGE_SHIFT); -- cgit v1.2.3 From 9979aa7778e664bb31efb4281a9e118a9909c35c Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 29 Oct 2008 14:17:59 -0700 Subject: [IA64] use common header for software IO/TLB Remove the swiotlb prototypes from the architecture code and use the common header file instead. Signed-off-by: Joerg Roedel Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/hp/common/hwsw_iommu.c | 9 +-------- arch/ia64/include/asm/machvec.h | 22 +--------------------- 2 files changed, 2 insertions(+), 29 deletions(-) diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index 88b6e6f3fd88..2769dbfd03bf 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -13,19 +13,12 @@ */ #include +#include #include /* swiotlb declarations & definitions: */ extern int swiotlb_late_init_with_default_size (size_t size); -extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; -extern ia64_mv_dma_free_coherent swiotlb_free_coherent; -extern ia64_mv_dma_map_single_attrs swiotlb_map_single_attrs; -extern ia64_mv_dma_unmap_single_attrs swiotlb_unmap_single_attrs; -extern ia64_mv_dma_map_sg_attrs swiotlb_map_sg_attrs; -extern ia64_mv_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs; -extern ia64_mv_dma_supported swiotlb_dma_supported; -extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error; /* hwiommu declarations & definitions: */ diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h index 1ea28bcee33b..59c17e446683 100644 --- a/arch/ia64/include/asm/machvec.h +++ b/arch/ia64/include/asm/machvec.h @@ -11,6 +11,7 @@ #define _ASM_IA64_MACHVEC_H #include +#include /* forward declarations: */ struct device; @@ -297,27 +298,6 @@ extern void machvec_init_from_cmdline(const char *cmdline); # error Unknown configuration. Update arch/ia64/include/asm/machvec.h. # endif /* CONFIG_IA64_GENERIC */ -/* - * Declare default routines which aren't declared anywhere else: - */ -extern ia64_mv_dma_init swiotlb_init; -extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; -extern ia64_mv_dma_free_coherent swiotlb_free_coherent; -extern ia64_mv_dma_map_single swiotlb_map_single; -extern ia64_mv_dma_map_single_attrs swiotlb_map_single_attrs; -extern ia64_mv_dma_unmap_single swiotlb_unmap_single; -extern ia64_mv_dma_unmap_single_attrs swiotlb_unmap_single_attrs; -extern ia64_mv_dma_map_sg swiotlb_map_sg; -extern ia64_mv_dma_map_sg_attrs swiotlb_map_sg_attrs; -extern ia64_mv_dma_unmap_sg swiotlb_unmap_sg; -extern ia64_mv_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs; -extern ia64_mv_dma_sync_single_for_cpu swiotlb_sync_single_for_cpu; -extern ia64_mv_dma_sync_sg_for_cpu swiotlb_sync_sg_for_cpu; -extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device; -extern ia64_mv_dma_sync_sg_for_device swiotlb_sync_sg_for_device; -extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error; -extern ia64_mv_dma_supported swiotlb_dma_supported; - /* * Define default versions so we can extend machvec for new platforms without having * to update the machvec files for all existing platforms. -- cgit v1.2.3 From 6a2d26fd3fd1129824ffe53778832f0794d99cc2 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 26 Oct 2008 23:09:19 +0800 Subject: [IA64] remove duplicated #include from pci-dma.c Removed duplicated #include and in arch/ia64/kernel/pci-dma.c. Signed-off-by: Huang Weiyi Signed-off-by: Tony Luck --- arch/ia64/kernel/pci-dma.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c index 031abbf9c875..dbdb778efa05 100644 --- a/arch/ia64/kernel/pci-dma.c +++ b/arch/ia64/kernel/pci-dma.c @@ -12,13 +12,11 @@ #include #include -#include #include #ifdef CONFIG_DMAR #include -#include #include #include -- cgit v1.2.3 From d8d54b0252280f519ad4f9268d2612b0463b3f9e Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 24 Oct 2008 14:41:09 +0900 Subject: [IA64] remove dead BIO_VMERGE_BOUNDARY definition The block layer dropped the virtual merge feature (b8b3e16cfe6435d961f6aaebcfd52a1ff2a988c5). BIO_VMERGE_BOUNDARY definition is meaningless now (For IA64, BIO_VMERGE_BOUNDARY has been meaningless for a long time since IA64 disables the virtual merge feature). Signed-off-by: FUJITA Tomonori Signed-off-by: Tony Luck --- arch/ia64/include/asm/io.h | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h index 7f257507cd86..0d9d16e2d949 100644 --- a/arch/ia64/include/asm/io.h +++ b/arch/ia64/include/asm/io.h @@ -434,28 +434,4 @@ extern void memset_io(volatile void __iomem *s, int c, long n); # endif /* __KERNEL__ */ -/* - * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing. It is said that - * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64). - * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on - * SPECweb-like workloads on zx1-based machines. Thus, for now we favor I/O MMU bypassing - * over BIO-level virtual merging. - */ -extern unsigned long ia64_max_iommu_merge_mask; -#if 1 -#define BIO_VMERGE_BOUNDARY 0 -#else -/* - * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here. Should be - * replaced by dma_merge_mask() or something of that sort. Note: the only way - * BIO_VMERGE_BOUNDARY is used is to mask off bits. Effectively, our definition gets - * expanded into: - * - * addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask) - * - * which is precisely what we want. - */ -#define BIO_VMERGE_BOUNDARY (ia64_max_iommu_merge_mask + 1) -#endif - #endif /* _ASM_IA64_IO_H */ -- cgit v1.2.3 From f2b3fdc8873629d154a1ef052141ebaf3e5a231d Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 3 Nov 2008 13:54:52 -0800 Subject: [IA64] Build VT-D iommu support into generic kernel Now that all the ia64 mmu pieces are in the tree we can build support into the generic kernel. Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 27eec71429b0..9f481ba59a4b 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -148,6 +148,7 @@ config IA64_GENERIC select ACPI_NUMA select SWIOTLB select PCI_MSI + select DMAR help This selects the system type of your hardware. A "generic" kernel will run on any supported IA-64 system. However, if you configure -- cgit v1.2.3 From 85d7a070264272ceffec0c7ce0e9af1e37c62b6e Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Tue, 4 Nov 2008 13:35:06 -0800 Subject: ARM: OMAP: Fix compiler warnings in gpmc.c Fix these compiler warnings: gpmc.c: In function 'gpmc_init': gpmc.c:432: warning: 'return' with a value, in function returning void gpmc.c:439: warning: 'return' with a value, in function returning void Signed-off-by: Sanjeev Premi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 763bdbeaf681..2249049c1d5a 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -429,18 +429,16 @@ void __init gpmc_init(void) gpmc_l3_clk = clk_get(NULL, ck); if (IS_ERR(gpmc_l3_clk)) { printk(KERN_ERR "Could not get GPMC clock %s\n", ck); - return -ENODEV; + BUG(); } gpmc_base = ioremap(l, SZ_4K); if (!gpmc_base) { clk_put(gpmc_l3_clk); printk(KERN_ERR "Could not get GPMC register memory\n"); - return -ENOMEM; + BUG(); } - BUG_ON(IS_ERR(gpmc_l3_clk)); - l = gpmc_read_reg(GPMC_REVISION); printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); /* Set smart idle mode and automatic L3 clock gating */ -- cgit v1.2.3 From e621f266d4cd18a07a833877c3995d2ccb35b951 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Tue, 4 Nov 2008 13:35:07 -0800 Subject: ARM: OMAP: Fix debugfs_create_*'s error checking method for arm/plat-omap debugfs_create_*() returns NULL if an error occurs, returns -ENODEV when debugfs is not enabled in the kernel. Comparing to PATCH v1, because clk_debugfs_init is included in "#if defined CONFIG_DEBUG_FS", we only need to check NULL return. Thanks Li Zefan debugfs_create_u8() and other function's return value's checking method are also fixed in this patch. Signed-off-by: Zhao Lei Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/clock.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index bf6a10c5fc4f..be6aab9c6834 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -428,23 +428,23 @@ static int clk_debugfs_register_one(struct clk *c) if (c->id != 0) sprintf(p, ":%d", c->id); d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; c->dent = d; d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); - if (IS_ERR(d)) { - err = PTR_ERR(d); + if (!d) { + err = -ENOMEM; goto err_out; } d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (IS_ERR(d)) { - err = PTR_ERR(d); + if (!d) { + err = -ENOMEM; goto err_out; } d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (IS_ERR(d)) { - err = PTR_ERR(d); + if (!d) { + err = -ENOMEM; goto err_out; } return 0; @@ -483,8 +483,8 @@ static int __init clk_debugfs_init(void) int err; d = debugfs_create_dir("clock", NULL); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; clk_debugfs_root = d; list_for_each_entry(c, &clocks, node) { -- cgit v1.2.3 From 52414739ca3df12f6d1e78d4dc670e97af0e845f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 4 Nov 2008 13:35:07 -0800 Subject: ARM: OMAP: Fix get_irqnr_and_base to clear spurious interrupt bits On omap24xx, INTCPS_SIR_IRQ_OFFSET bits [6:0] contains the current active interrupt number. However, on 34xx INTCPS_SIR_IRQ_OFFSET bits [31:7] also contains the SPURIOUSIRQFLAG, which gets set if the interrupt sorting information is invalid. If the SPURIOUSIRQFLAG bits are not ignored, the interrupt code will occasionally produce a bunch of confusing errors: irq -33, desc: c02ddcc8, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c006f23c, handle_bad_irq+0x0/0x22c ->chip(): 00000000, 0x0 ->action(): 00000000 Fix this by masking out only the ACTIVEIRQ bits. Also fix a confusing comment. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/entry-macro.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index 030118ee204a..2276f89671d8 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -65,7 +65,8 @@ #include #endif -#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt number */ +#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ +#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ .macro disable_fiq .endm @@ -88,6 +89,7 @@ cmp \irqnr, #0x0 2222: ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] + and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ .endm -- cgit v1.2.3 From 5c32f62b97d62bec097c09e54e6602d0fce2af07 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 4 Nov 2008 13:35:08 -0800 Subject: ARM: OMAP: Fix define for twl4030 irqs Otherwise twl4030 gpios won't work. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/irqs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index a2929ac8c687..bed5274c910a 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -372,7 +372,7 @@ /* External TWL4030 gpio interrupts are optional */ #define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END -#ifdef CONFIG_TWL4030_GPIO +#ifdef CONFIG_GPIO_TWL4030 #define TWL4030_GPIO_NR_IRQS 18 #else #define TWL4030_GPIO_NR_IRQS 0 -- cgit v1.2.3 From 79654a7698195fa043063092f5c1ca5245276fba Mon Sep 17 00:00:00 2001 From: Andreas Steffen Date: Tue, 4 Nov 2008 14:49:19 -0800 Subject: xfrm: Have af-specific init_tempsel() initialize family field of temporary selector While adding MIGRATE support to strongSwan, Andreas Steffen noticed that the selectors provided in XFRM_MSG_ACQUIRE have their family field uninitialized (those in MIGRATE do have their family set). Looking at the code, this is because the af-specific init_tempsel() (called via afinfo->init_tempsel() in xfrm_init_tempsel()) do not set the value. Reported-by: Andreas Steffen Acked-by: Herbert Xu Signed-off-by: Arnaud Ebalard --- net/ipv4/xfrm4_state.c | 1 + net/ipv6/xfrm6_state.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/ipv4/xfrm4_state.c b/net/ipv4/xfrm4_state.c index 07735ed280d7..55dc6beab9aa 100644 --- a/net/ipv4/xfrm4_state.c +++ b/net/ipv4/xfrm4_state.c @@ -33,6 +33,7 @@ __xfrm4_init_tempsel(struct xfrm_state *x, struct flowi *fl, x->sel.dport_mask = htons(0xffff); x->sel.sport = xfrm_flowi_sport(fl); x->sel.sport_mask = htons(0xffff); + x->sel.family = AF_INET; x->sel.prefixlen_d = 32; x->sel.prefixlen_s = 32; x->sel.proto = fl->proto; diff --git a/net/ipv6/xfrm6_state.c b/net/ipv6/xfrm6_state.c index 89884a4f23aa..60c78cfc2737 100644 --- a/net/ipv6/xfrm6_state.c +++ b/net/ipv6/xfrm6_state.c @@ -34,6 +34,7 @@ __xfrm6_init_tempsel(struct xfrm_state *x, struct flowi *fl, x->sel.dport_mask = htons(0xffff); x->sel.sport = xfrm_flowi_sport(fl); x->sel.sport_mask = htons(0xffff); + x->sel.family = AF_INET6; x->sel.prefixlen_d = 128; x->sel.prefixlen_s = 128; x->sel.proto = fl->proto; -- cgit v1.2.3 From 9b22ea560957de1484e6b3e8538f7eef202e3596 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 4 Nov 2008 14:49:57 -0800 Subject: net: fix packet socket delivery in rx irq handler The changes to deliver hardware accelerated VLAN packets to packet sockets (commit bc1d0411) caused a warning for non-NAPI drivers. The __vlan_hwaccel_rx() function is called directly from the drivers RX function, for non-NAPI drivers that means its still in RX IRQ context: [ 27.779463] ------------[ cut here ]------------ [ 27.779509] WARNING: at kernel/softirq.c:136 local_bh_enable+0x37/0x81() ... [ 27.782520] [] netif_nit_deliver+0x5b/0x75 [ 27.782590] [] __vlan_hwaccel_rx+0x79/0x162 [ 27.782664] [] atl1_intr+0x9a9/0xa7c [atl1] [ 27.782738] [] handle_IRQ_event+0x23/0x51 [ 27.782808] [] handle_edge_irq+0xc2/0x102 [ 27.782878] [] do_IRQ+0x4d/0x64 Split hardware accelerated VLAN reception into two parts to fix this: - __vlan_hwaccel_rx just stores the VLAN TCI and performs the VLAN device lookup, then calls netif_receive_skb()/netif_rx() - vlan_hwaccel_do_receive(), which is invoked by netif_receive_skb() in softirq context, performs the real reception and delivery to packet sockets. Reported-and-tested-by: Ramon Casellas Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/if_vlan.h | 7 +++++++ net/8021q/vlan_core.c | 46 +++++++++++++++++++++++++++++++++------------- net/core/dev.c | 3 +++ 3 files changed, 43 insertions(+), 13 deletions(-) diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index 9e7b49b8062d..a5cb0c3f6dcf 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -114,6 +114,8 @@ extern u16 vlan_dev_vlan_id(const struct net_device *dev); extern int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp, u16 vlan_tci, int polling); +extern int vlan_hwaccel_do_receive(struct sk_buff *skb); + #else static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev) { @@ -133,6 +135,11 @@ static inline int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp, BUG(); return NET_XMIT_SUCCESS; } + +static inline int vlan_hwaccel_do_receive(struct sk_buff *skb) +{ + return 0; +} #endif /** diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 916061f681b6..68ced4bf158c 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -3,11 +3,20 @@ #include #include "vlan.h" +struct vlan_hwaccel_cb { + struct net_device *dev; +}; + +static inline struct vlan_hwaccel_cb *vlan_hwaccel_cb(struct sk_buff *skb) +{ + return (struct vlan_hwaccel_cb *)skb->cb; +} + /* VLAN rx hw acceleration helper. This acts like netif_{rx,receive_skb}(). */ int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp, u16 vlan_tci, int polling) { - struct net_device_stats *stats; + struct vlan_hwaccel_cb *cb = vlan_hwaccel_cb(skb); if (skb_bond_should_drop(skb)) { dev_kfree_skb_any(skb); @@ -15,23 +24,35 @@ int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp, } skb->vlan_tci = vlan_tci; + cb->dev = vlan_group_get_device(grp, vlan_tci & VLAN_VID_MASK); + + return (polling ? netif_receive_skb(skb) : netif_rx(skb)); +} +EXPORT_SYMBOL(__vlan_hwaccel_rx); + +int vlan_hwaccel_do_receive(struct sk_buff *skb) +{ + struct vlan_hwaccel_cb *cb = vlan_hwaccel_cb(skb); + struct net_device *dev = cb->dev; + struct net_device_stats *stats; + netif_nit_deliver(skb); - skb->dev = vlan_group_get_device(grp, vlan_tci & VLAN_VID_MASK); - if (skb->dev == NULL) { - dev_kfree_skb_any(skb); - /* Not NET_RX_DROP, this is not being dropped - * due to congestion. */ - return NET_RX_SUCCESS; + if (dev == NULL) { + kfree_skb(skb); + return -1; } - skb->dev->last_rx = jiffies; + + skb->dev = dev; + skb->priority = vlan_get_ingress_priority(dev, skb->vlan_tci); skb->vlan_tci = 0; - stats = &skb->dev->stats; + dev->last_rx = jiffies; + + stats = &dev->stats; stats->rx_packets++; stats->rx_bytes += skb->len; - skb->priority = vlan_get_ingress_priority(skb->dev, vlan_tci); switch (skb->pkt_type) { case PACKET_BROADCAST: break; @@ -43,13 +64,12 @@ int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp, * This allows the VLAN to have a different MAC than the * underlying device, and still route correctly. */ if (!compare_ether_addr(eth_hdr(skb)->h_dest, - skb->dev->dev_addr)) + dev->dev_addr)) skb->pkt_type = PACKET_HOST; break; }; - return (polling ? netif_receive_skb(skb) : netif_rx(skb)); + return 0; } -EXPORT_SYMBOL(__vlan_hwaccel_rx); struct net_device *vlan_dev_real_dev(const struct net_device *dev) { diff --git a/net/core/dev.c b/net/core/dev.c index d9038e328cc1..9174c77d3112 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2218,6 +2218,9 @@ int netif_receive_skb(struct sk_buff *skb) int ret = NET_RX_DROP; __be16 type; + if (skb->vlan_tci && vlan_hwaccel_do_receive(skb)) + return NET_RX_SUCCESS; + /* if we've gotten here through NAPI, check netpoll */ if (netpoll_receive_skb(skb)) return NET_RX_DROP; -- cgit v1.2.3 From fce4d58353e449a1ac637fc8d2b994e0fcc55312 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 2 Nov 2008 07:26:51 +0000 Subject: powerpc/ps3: Fix compile error in ps3-lpm.c Compiling with CONFIG_SMP = n and CONFIG_PS3_LPM != n gives this error: drivers/ps3/ps3-lpm.c:838: error: implicit declaration of function 'get_hard_smp_processor_id' This fixes it. We have to include rather than because the UP definition of get_hard_smp_processor_id() is in , and only includes if CONFIG_SMP = y. Signed-off-by: Alexey Dobriyan Acked-by: Geoff Levand Signed-off-by: Paul Mackerras --- drivers/ps3/ps3-lpm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c index 85edf945ab86..204158cf7a55 100644 --- a/drivers/ps3/ps3-lpm.c +++ b/drivers/ps3/ps3-lpm.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 9c8b4aff18b59cd0c2d9a77b3df1f9d7077df90c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 2 Nov 2008 10:21:57 +0000 Subject: powerpc/cell: Fix compile error in ras.c This fixes this error on Cell when CONFIG_KEXEC = n: arch/powerpc/platforms/cell/ras.c:299: error: implicit declaration of function 'crash_shutdown_register' We have to include because it contains the dummy definition of crash_shutdown_register that is used when CONFIG_KEXEC=n, but doesn't include in that case. Signed-off-by: Alexey Dobriyan Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/ras.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index fdf088f2430e..7b4cefa2199b 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From 454666eb78d890f5740ea1901f8b01a43c77c67c Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Sun, 2 Nov 2008 21:18:24 +0000 Subject: powerpc: Fix "unused variable" warning in pci_dlpar.c This gets rid of this build warning: arch/powerpc/platforms/pseries/pci_dlpar.c: In function 'init_phb_dynamic': arch/powerpc/platforms/pseries/pci_dlpar.c:192: warning: unused variable 'b' This is one of the very few warnings left in a ppc64_defconfig build and getting rid of it will make it easier to see future introduced ones (in fact this was introduced very recently). Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/pci_dlpar.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 31481dc485de..7190493e9bdc 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -189,7 +189,6 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) { struct pci_controller *phb; int primary; - struct pci_bus *b; primary = list_empty(&hose_list); phb = pcibios_alloc_controller(dn); -- cgit v1.2.3 From 072ba49838b42c873c496d72c91bb237914cf3b6 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Sun, 26 Oct 2008 15:26:57 -0700 Subject: ftrace: fix breakage in bin_fmt results In 777e208d40d0953efc6fb4ab58590da3f7d8f02d we changed from outputting field->cpu (a char) to iter->cpu (unsigned int), increasing the resulting structure size by 3 bytes. Signed-off-by: Eric Anholt Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9f3b478f9171..974973e39e87 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1755,7 +1755,7 @@ static enum print_line_t print_bin_fmt(struct trace_iterator *iter) return TRACE_TYPE_HANDLED; SEQ_PUT_FIELD_RET(s, entry->pid); - SEQ_PUT_FIELD_RET(s, iter->cpu); + SEQ_PUT_FIELD_RET(s, entry->cpu); SEQ_PUT_FIELD_RET(s, iter->ts); switch (entry->type) { -- cgit v1.2.3 From f4b6755fb37595da3630d1d6fc130ea6888cd48f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 4 Nov 2008 21:25:07 +0100 Subject: sched: cleanup fair task selection Impact: cleanup Clean up task selection Signed-off-by: Peter Zijlstra Acked-by: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 33 +++++++++++---------------------- 1 file changed, 11 insertions(+), 22 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index ce514afd78ff..6167336a2372 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -347,17 +347,17 @@ static void __dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se) rb_erase(&se->run_node, &cfs_rq->tasks_timeline); } -static inline struct rb_node *first_fair(struct cfs_rq *cfs_rq) -{ - return cfs_rq->rb_leftmost; -} - static struct sched_entity *__pick_next_entity(struct cfs_rq *cfs_rq) { - return rb_entry(first_fair(cfs_rq), struct sched_entity, run_node); + struct rb_node *left = cfs_rq->rb_leftmost; + + if (!left) + return NULL; + + return rb_entry(left, struct sched_entity, run_node); } -static inline struct sched_entity *__pick_last_entity(struct cfs_rq *cfs_rq) +static struct sched_entity *__pick_last_entity(struct cfs_rq *cfs_rq) { struct rb_node *last = rb_last(&cfs_rq->tasks_timeline); @@ -794,28 +794,16 @@ set_next_entity(struct cfs_rq *cfs_rq, struct sched_entity *se) static int wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se); -static struct sched_entity * -pick_next(struct cfs_rq *cfs_rq, struct sched_entity *se) +static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq) { + struct sched_entity *se = __pick_next_entity(cfs_rq); + if (!cfs_rq->next || wakeup_preempt_entity(cfs_rq->next, se) == 1) return se; return cfs_rq->next; } -static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq) -{ - struct sched_entity *se = NULL; - - if (first_fair(cfs_rq)) { - se = __pick_next_entity(cfs_rq); - se = pick_next(cfs_rq, se); - set_next_entity(cfs_rq, se); - } - - return se; -} - static void put_prev_entity(struct cfs_rq *cfs_rq, struct sched_entity *prev) { /* @@ -1396,6 +1384,7 @@ static struct task_struct *pick_next_task_fair(struct rq *rq) do { se = pick_next_entity(cfs_rq); + set_next_entity(cfs_rq, se); cfs_rq = group_cfs_rq(se); } while (cfs_rq); -- cgit v1.2.3 From d95f98d0691d3aba5e35850011946a08c9b36428 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 4 Nov 2008 21:25:08 +0100 Subject: sched: fix fair preempt check Impact: fix cross-class preemption Inter-class wakeup preemptions should go on class order. Signed-off-by: Peter Zijlstra Acked-by: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 6167336a2372..ebd6de8d17fd 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1329,6 +1329,9 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync) return; } + if (unlikely(p->sched_class != &fair_sched_class)) + return; + if (unlikely(se == pse)) return; -- cgit v1.2.3 From 4793241be408b3926ee00c704d7da3b3faf3a05f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 4 Nov 2008 21:25:09 +0100 Subject: sched: backward looking buddy Impact: improve/change/fix wakeup-buddy scheduling Currently we only have a forward looking buddy, that is, we prefer to schedule to the task we last woke up, under the presumption that its going to consume the data we just produced, and therefore will have cache hot benefits. This allows co-waking producer/consumer task pairs to run ahead of the pack for a little while, keeping their cache warm. Without this, we would interleave all pairs, utterly trashing the cache. This patch introduces a backward looking buddy, that is, suppose that in the above scenario, the consumer preempts the producer before it can go to sleep, we will therefore miss the wakeup from consumer to producer (its already running, after all), breaking the cycle and reverting to the cache-trashing interleaved schedule pattern. The backward buddy will try to schedule back to the task that woke us up in case the forward buddy is not available, under the assumption that the last task will be the one with the most cache hot task around barring current. This will basically allow a task to continue after it got preempted. In order to avoid starvation, we allow either buddy to get wakeup_gran ahead of the pack. Signed-off-by: Peter Zijlstra Acked-by: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 6 ++++-- kernel/sched_fair.c | 32 +++++++++++++++++++++++++------- kernel/sched_features.h | 1 + 3 files changed, 30 insertions(+), 9 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index e8819bc6f462..82cc839c9210 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -397,7 +397,7 @@ struct cfs_rq { * 'curr' points to currently running entity on this cfs_rq. * It is set to NULL otherwise (i.e when none are currently running). */ - struct sched_entity *curr, *next; + struct sched_entity *curr, *next, *last; unsigned long nr_spread_over; @@ -1805,7 +1805,9 @@ task_hot(struct task_struct *p, u64 now, struct sched_domain *sd) /* * Buddy candidates are cache hot: */ - if (sched_feat(CACHE_HOT_BUDDY) && (&p->se == cfs_rq_of(&p->se)->next)) + if (sched_feat(CACHE_HOT_BUDDY) && + (&p->se == cfs_rq_of(&p->se)->next || + &p->se == cfs_rq_of(&p->se)->last)) return 1; if (p->sched_class != &fair_sched_class) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index ebd6de8d17fd..a6b1db8a0bd8 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -341,9 +341,6 @@ static void __dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se) cfs_rq->rb_leftmost = next_node; } - if (cfs_rq->next == se) - cfs_rq->next = NULL; - rb_erase(&se->run_node, &cfs_rq->tasks_timeline); } @@ -741,6 +738,12 @@ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) #endif } + if (cfs_rq->last == se) + cfs_rq->last = NULL; + + if (cfs_rq->next == se) + cfs_rq->next = NULL; + if (se != cfs_rq->curr) __dequeue_entity(cfs_rq, se); account_entity_dequeue(cfs_rq, se); @@ -798,10 +801,13 @@ static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq) { struct sched_entity *se = __pick_next_entity(cfs_rq); - if (!cfs_rq->next || wakeup_preempt_entity(cfs_rq->next, se) == 1) - return se; + if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, se) < 1) + return cfs_rq->next; - return cfs_rq->next; + if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, se) < 1) + return cfs_rq->last; + + return se; } static void put_prev_entity(struct cfs_rq *cfs_rq, struct sched_entity *prev) @@ -1319,10 +1325,11 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se) static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync) { struct task_struct *curr = rq->curr; - struct cfs_rq *cfs_rq = task_cfs_rq(curr); struct sched_entity *se = &curr->se, *pse = &p->se; if (unlikely(rt_prio(p->prio))) { + struct cfs_rq *cfs_rq = task_cfs_rq(curr); + update_rq_clock(rq); update_curr(cfs_rq); resched_task(curr); @@ -1335,6 +1342,17 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync) if (unlikely(se == pse)) return; + /* + * Only set the backward buddy when the current task is still on the + * rq. This can happen when a wakeup gets interleaved with schedule on + * the ->pre_schedule() or idle_balance() point, either of which can + * drop the rq lock. + * + * Also, during early boot the idle thread is in the fair class, for + * obvious reasons its a bad idea to schedule back to the idle thread. + */ + if (sched_feat(LAST_BUDDY) && likely(se->on_rq && curr != rq->idle)) + cfs_rq_of(se)->last = se; cfs_rq_of(pse)->next = pse; /* diff --git a/kernel/sched_features.h b/kernel/sched_features.h index fda016218296..da5d93b5d2c6 100644 --- a/kernel/sched_features.h +++ b/kernel/sched_features.h @@ -12,3 +12,4 @@ SCHED_FEAT(LB_BIAS, 1) SCHED_FEAT(LB_WAKEUP_UPDATE, 1) SCHED_FEAT(ASYM_EFF_LOAD, 1) SCHED_FEAT(WAKEUP_OVERLAP, 0) +SCHED_FEAT(LAST_BUDDY, 1) -- cgit v1.2.3 From 02479099c286894644f8e96c6bbb535ab64662fd Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 4 Nov 2008 21:25:10 +0100 Subject: sched: fix buddies for group scheduling Impact: scheduling order fix for group scheduling For each level in the hierarchy, set the buddy to point to the right entity. Therefore, when we do the hierarchical schedule, we have a fair chance of ending up where we meant to. Signed-off-by: Peter Zijlstra Acked-by: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index a6b1db8a0bd8..51aa3e102acb 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1319,6 +1319,18 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se) return 0; } +static void set_last_buddy(struct sched_entity *se) +{ + for_each_sched_entity(se) + cfs_rq_of(se)->last = se; +} + +static void set_next_buddy(struct sched_entity *se) +{ + for_each_sched_entity(se) + cfs_rq_of(se)->next = se; +} + /* * Preempt the current task with a newly woken task if needed: */ @@ -1352,8 +1364,8 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync) * obvious reasons its a bad idea to schedule back to the idle thread. */ if (sched_feat(LAST_BUDDY) && likely(se->on_rq && curr != rq->idle)) - cfs_rq_of(se)->last = se; - cfs_rq_of(pse)->next = pse; + set_last_buddy(se); + set_next_buddy(pse); /* * We can come here with TIF_NEED_RESCHED already set from new task -- cgit v1.2.3 From b22cecdd8fa4667ebab02def0866387e709927ee Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 5 Nov 2008 01:35:55 -0800 Subject: net/9p: fix printk format warnings Fix printk format warnings in net/9p. Built cleanly on 7 arches. net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- net/9p/client.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/net/9p/client.c b/net/9p/client.c index 67717f69412e..0a04faa22116 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -818,7 +818,9 @@ struct p9_fid *p9_client_attach(struct p9_client *clnt, struct p9_fid *afid, } P9_DPRINTK(P9_DEBUG_9P, "<<< RATTACH qid %x.%llx.%x\n", - qid.type, qid.path, qid.version); + qid.type, + (unsigned long long)qid.path, + qid.version); memmove(&fid->qid, &qid, sizeof(struct p9_qid)); @@ -865,7 +867,9 @@ p9_client_auth(struct p9_client *clnt, char *uname, u32 n_uname, char *aname) } P9_DPRINTK(P9_DEBUG_9P, "<<< RAUTH qid %x.%llx.%x\n", - qid.type, qid.path, qid.version); + qid.type, + (unsigned long long)qid.path, + qid.version); memmove(&afid->qid, &qid, sizeof(struct p9_qid)); p9_free_req(clnt, req); @@ -930,7 +934,8 @@ struct p9_fid *p9_client_walk(struct p9_fid *oldfid, int nwname, char **wnames, for (count = 0; count < nwqids; count++) P9_DPRINTK(P9_DEBUG_9P, "<<< [%d] %x.%llx.%x\n", - count, wqids[count].type, wqids[count].path, + count, wqids[count].type, + (unsigned long long)wqids[count].path, wqids[count].version); if (nwname) @@ -980,7 +985,9 @@ int p9_client_open(struct p9_fid *fid, int mode) } P9_DPRINTK(P9_DEBUG_9P, "<<< ROPEN qid %x.%llx.%x iounit %x\n", - qid.type, qid.path, qid.version, iounit); + qid.type, + (unsigned long long)qid.path, + qid.version, iounit); fid->mode = mode; fid->iounit = iounit; @@ -1023,7 +1030,9 @@ int p9_client_fcreate(struct p9_fid *fid, char *name, u32 perm, int mode, } P9_DPRINTK(P9_DEBUG_9P, "<<< RCREATE qid %x.%llx.%x iounit %x\n", - qid.type, qid.path, qid.version, iounit); + qid.type, + (unsigned long long)qid.path, + qid.version, iounit); fid->mode = mode; fid->iounit = iounit; @@ -1230,9 +1239,9 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid) "<<< name=%s uid=%s gid=%s muid=%s extension=(%s)\n" "<<< uid=%d gid=%d n_muid=%d\n", ret->size, ret->type, ret->dev, ret->qid.type, - ret->qid.path, ret->qid.version, ret->mode, - ret->atime, ret->mtime, ret->length, ret->name, - ret->uid, ret->gid, ret->muid, ret->extension, + (unsigned long long)ret->qid.path, ret->qid.version, ret->mode, + ret->atime, ret->mtime, (unsigned long long)ret->length, + ret->name, ret->uid, ret->gid, ret->muid, ret->extension, ret->n_uid, ret->n_gid, ret->n_muid); free_and_error: @@ -1255,9 +1264,9 @@ int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst) " name=%s uid=%s gid=%s muid=%s extension=(%s)\n" " uid=%d gid=%d n_muid=%d\n", wst->size, wst->type, wst->dev, wst->qid.type, - wst->qid.path, wst->qid.version, wst->mode, - wst->atime, wst->mtime, wst->length, wst->name, - wst->uid, wst->gid, wst->muid, wst->extension, + (unsigned long long)wst->qid.path, wst->qid.version, wst->mode, + wst->atime, wst->mtime, (unsigned long long)wst->length, + wst->name, wst->uid, wst->gid, wst->muid, wst->extension, wst->n_uid, wst->n_gid, wst->n_muid); err = 0; clnt = fid->clnt; -- cgit v1.2.3 From e3ec6cfc260e2322834e200c2fa349cdf104fd13 Mon Sep 17 00:00:00 2001 From: Benjamin Thery Date: Wed, 5 Nov 2008 01:43:57 -0800 Subject: ipv6: fix run pending DAD when interface becomes ready With some net devices types, an IPv6 address configured while the interface was down can stay 'tentative' forever, even after the interface is set up. In some case, pending IPv6 DADs are not executed when the device becomes ready. I observed this while doing some tests with kvm. If I assign an IPv6 address to my interface eth0 (kvm driver rtl8139) when it is still down then the address is flagged tentative (IFA_F_TENTATIVE). Then, I set eth0 up, and to my surprise, the address stays 'tentative', no DAD is executed and the address can't be pinged. I also observed the same behaviour, without kvm, with virtual interfaces types macvlan and veth. Some easy steps to reproduce the issue with macvlan: 1. ip link add link eth0 type macvlan 2. ip -6 addr add 2003::ab32/64 dev macvlan0 3. ip addr show dev macvlan0 ... inet6 2003::ab32/64 scope global tentative ... 4. ip link set macvlan0 up 5. ip addr show dev macvlan0 ... inet6 2003::ab32/64 scope global tentative ... Address is still tentative I think there's a bug in net/ipv6/addrconf.c, addrconf_notify(): addrconf_dad_run() is not always run when the interface is flagged IF_READY. Currently it is only run when receiving NETDEV_CHANGE event. Looks like some (virtual) devices doesn't send this event when becoming up. For both NETDEV_UP and NETDEV_CHANGE events, when the interface becomes ready, run_pending should be set to 1. Patch below. 'run_pending = 1' could be moved below the if/else block but it makes the code less readable. Signed-off-by: Benjamin Thery Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index eea9542728ca..d9da5eb9dcb2 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2483,8 +2483,10 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, if (!idev && dev->mtu >= IPV6_MIN_MTU) idev = ipv6_add_dev(dev); - if (idev) + if (idev) { idev->if_flags |= IF_READY; + run_pending = 1; + } } else { if (!addrconf_qdisc_ok(dev)) { /* device is still not ready. */ -- cgit v1.2.3 From 959973b92d3ba235edfa5dcb5df1be1e5d1deba2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 5 Nov 2008 11:30:56 +0100 Subject: ALSA: hda - Add a quirk for MEDION MD96630 Use model=lenovo-ms7195-dig for MEDION MD96630 laptop (17c0:4085) with ALC888 codec. Reference: Novell bnc#412548 https://bugzilla.novell.com/show_bug.cgi?id=412528 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a4666c96a44f..a378c0145125 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8469,6 +8469,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763), SND_PCI_QUIRK(0x17aa, 0x101d, "Lenovo Sky", ALC888_LENOVO_SKY), SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2), + SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG), SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66), SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL), -- cgit v1.2.3 From efb9a8c28ca0edd9e2572117105ebad9bbc0c368 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 5 Nov 2008 03:03:18 -0800 Subject: netfilter: netns ct: walk netns list under RTNL netns list (just list) is under RTNL. But helper and proto unregistration happen during rmmod when RTNL is not held, and that's how it was tested: modprobe/rmmod vs clone(CLONE_NEWNET)/exit. BUG: unable to handle kernel paging request at 0000000000100100 <=== IP: [] nf_conntrack_l4proto_unregister+0x96/0xae [nf_conntrack] PGD 15e300067 PUD 15e1d8067 PMD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC last sysfs file: /sys/kernel/uevent_seqnum CPU 0 Modules linked in: nf_conntrack_proto_sctp(-) nf_conntrack_proto_dccp(-) af_packet iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 sr_mod cdrom [last unloaded: nf_conntrack_proto_sctp] Pid: 16758, comm: rmmod Not tainted 2.6.28-rc2-netns-xfrm #3 RIP: 0010:[] [] nf_conntrack_l4proto_unregister+0x96/0xae [nf_conntrack] RSP: 0018:ffff88015dc1fec8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: 00000000001000f8 RCX: 0000000000000000 RDX: ffffffffa009575c RSI: 0000000000000003 RDI: ffffffffa00956b5 RBP: ffff88015dc1fed8 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: ffff88015dc1fe48 R12: ffffffffa0458f60 R13: 0000000000000880 R14: 00007fff4c361d30 R15: 0000000000000880 FS: 00007f624435a6f0(0000) GS:ffffffff80521580(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000100100 CR3: 0000000168969000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 16758, threadinfo ffff88015dc1e000, task ffff880179864218) Stack: ffffffffa0459100 0000000000000000 ffff88015dc1fee8 ffffffffa0457934 ffff88015dc1ff78 ffffffff80253fef 746e6e6f635f666e 6f72705f6b636172 00707463735f6f74 ffffffff8024cb30 00000000023b8010 0000000000000000 Call Trace: [] nf_conntrack_proto_sctp_fini+0x10/0x1e [nf_conntrack_proto_sctp] [] sys_delete_module+0x19f/0x1fe [] ? trace_hardirqs_on_caller+0xf0/0x114 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Code: 13 35 e0 e8 c4 6c 1a e0 48 8b 1d 6d c6 46 e0 eb 16 48 89 df 4c 89 e2 48 c7 c6 fc 85 09 a0 e8 61 cd ff ff 48 8b 5b 08 48 83 eb 08 <48> 8b 43 08 0f 18 08 48 8d 43 08 48 3d 60 4f 50 80 75 d3 5b 41 RIP [] nf_conntrack_l4proto_unregister+0x96/0xae [nf_conntrack] RSP CR2: 0000000000100100 ---[ end trace bde8ac82debf7192 ]--- Signed-off-by: Alexey Dobriyan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_helper.c | 3 +++ net/netfilter/nf_conntrack_proto.c | 5 +++++ 2 files changed, 8 insertions(+) diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 9c06b9f86ad4..c39b6a994133 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -167,10 +168,12 @@ void nf_conntrack_helper_unregister(struct nf_conntrack_helper *me) */ synchronize_rcu(); + rtnl_lock(); spin_lock_bh(&nf_conntrack_lock); for_each_net(net) __nf_conntrack_helper_unregister(me, net); spin_unlock_bh(&nf_conntrack_lock); + rtnl_unlock(); } EXPORT_SYMBOL_GPL(nf_conntrack_helper_unregister); diff --git a/net/netfilter/nf_conntrack_proto.c b/net/netfilter/nf_conntrack_proto.c index a59a307e685d..592d73344d46 100644 --- a/net/netfilter/nf_conntrack_proto.c +++ b/net/netfilter/nf_conntrack_proto.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -221,8 +222,10 @@ void nf_conntrack_l3proto_unregister(struct nf_conntrack_l3proto *proto) synchronize_rcu(); /* Remove all contrack entries for this protocol */ + rtnl_lock(); for_each_net(net) nf_ct_iterate_cleanup(net, kill_l3proto, proto); + rtnl_unlock(); } EXPORT_SYMBOL_GPL(nf_conntrack_l3proto_unregister); @@ -333,8 +336,10 @@ void nf_conntrack_l4proto_unregister(struct nf_conntrack_l4proto *l4proto) synchronize_rcu(); /* Remove all contrack entries for this protocol */ + rtnl_lock(); for_each_net(net) nf_ct_iterate_cleanup(net, kill_l4proto, l4proto); + rtnl_unlock(); } EXPORT_SYMBOL_GPL(nf_conntrack_l4proto_unregister); -- cgit v1.2.3 From 518a09ef11f8454f4676125d47c3e775b300c6a5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 5 Nov 2008 03:36:01 -0800 Subject: tcp: Fix recvmsg MSG_PEEK influence of blocking behavior. Vito Caputo noticed that tcp_recvmsg() returns immediately from partial reads when MSG_PEEK is used. In particular, this means that SO_RCVLOWAT is not respected. Simply remove the test. And this matches the behavior of several other systems, including BSD. Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index eccb7165a80c..c5aca0bb116a 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1374,8 +1374,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, sk->sk_state == TCP_CLOSE || (sk->sk_shutdown & RCV_SHUTDOWN) || !timeo || - signal_pending(current) || - (flags & MSG_PEEK)) + signal_pending(current)) break; } else { if (sock_flag(sk, SOCK_DONE)) -- cgit v1.2.3 From 467622ef2acb01986eab37ef96c3632b3ea35999 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 1 Nov 2008 04:19:11 -0700 Subject: [MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4) For "unlock" cycles to 16bit devices in 8bit compatibility mode we need to use the byte addresses 0xaaa and 0x555. These effectively match the word address 0x555 and 0x2aa, except the latter has its low bit set. Most chips don't care about the value of the 'A-1' pin in x8 mode, but some -- like the ST M29W320D -- do. So we need to be careful to set it where appropriate. cfi_send_gen_cmd is only ever passed addresses where the low byte is 0x00, 0x55 or 0xaa. Of those, only addresses ending 0xaa are affected by this patch, by masking in the extra low bit when the device is known to be in compatibility mode. [dwmw2: Do it only when (cmd_ofs & 0xff) == 0xaa] v4: Fix stupid typo in cfi_build_cmd_addr that failed to compile I'm writing this patch way to late at night. v3: Bring all of the work back into cfi_build_cmd_addr including calling of map_bankwidth(map) and cfi_interleave(cfi) So every caller doesn't need to. v2: Only modified the address if we our device_type is larger than our bus width. Cc: stable@kernel.org Signed-off-by: Eric W. Biederman Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0002.c | 13 ------------- drivers/mtd/chips/jedec_probe.c | 10 ++++------ include/linux/mtd/cfi.h | 22 +++++++++++++++++++--- 3 files changed, 23 insertions(+), 22 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 3e6f5d8609e8..d74ec46aa032 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -406,19 +406,6 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) /* Set the default CFI lock/unlock addresses */ cfi->addr_unlock1 = 0x555; cfi->addr_unlock2 = 0x2aa; - /* Modify the unlock address if we are in compatibility mode */ - if ( /* x16 in x8 mode */ - ((cfi->device_type == CFI_DEVICETYPE_X8) && - (cfi->cfiq->InterfaceDesc == - CFI_INTERFACE_X8_BY_X16_ASYNC)) || - /* x32 in x16 mode */ - ((cfi->device_type == CFI_DEVICETYPE_X16) && - (cfi->cfiq->InterfaceDesc == - CFI_INTERFACE_X16_BY_X32_ASYNC))) - { - cfi->addr_unlock1 = 0xaaa; - cfi->addr_unlock2 = 0x555; - } } /* CFI mode */ else if (cfi->cfi_mode == CFI_MODE_JEDEC) { diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index f84ab6182148..2f3f2f719ba4 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -1808,9 +1808,7 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base, * several first banks can contain 0x7f instead of actual ID */ do { - uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), - cfi_interleave(cfi), - cfi->device_type); + uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), map, cfi); mask = (1 << (cfi->device_type * 8)) - 1; result = map_read(map, base + ofs); bank++; @@ -1824,7 +1822,7 @@ static inline u32 jedec_read_id(struct map_info *map, uint32_t base, { map_word result; unsigned long mask; - u32 ofs = cfi_build_cmd_addr(1, cfi_interleave(cfi), cfi->device_type); + u32 ofs = cfi_build_cmd_addr(1, map, cfi); mask = (1 << (cfi->device_type * 8)) -1; result = map_read(map, base + ofs); return result.x[0] & mask; @@ -2067,8 +2065,8 @@ static int jedec_probe_chip(struct map_info *map, __u32 base, } /* Ensure the unlock addresses we try stay inside the map */ - probe_offset1 = cfi_build_cmd_addr(cfi->addr_unlock1, cfi_interleave(cfi), cfi->device_type); - probe_offset2 = cfi_build_cmd_addr(cfi->addr_unlock2, cfi_interleave(cfi), cfi->device_type); + probe_offset1 = cfi_build_cmd_addr(cfi->addr_unlock1, map, cfi); + probe_offset2 = cfi_build_cmd_addr(cfi->addr_unlock2, map, cfi); if ( ((base + probe_offset1 + map_bankwidth(map)) >= map->size) || ((base + probe_offset2 + map_bankwidth(map)) >= map->size)) goto retry; diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index ee5124ec319e..00e2b575021f 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -282,9 +282,25 @@ struct cfi_private { /* * Returns the command address according to the given geometry. */ -static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, int interleave, int type) +static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, + struct map_info *map, struct cfi_private *cfi) { - return (cmd_ofs * type) * interleave; + unsigned bankwidth = map_bankwidth(map); + unsigned interleave = cfi_interleave(cfi); + unsigned type = cfi->device_type; + uint32_t addr; + + addr = (cmd_ofs * type) * interleave; + + /* Modify the unlock address if we are in compatiblity mode. + * For 16bit devices on 8 bit busses + * and 32bit devices on 16 bit busses + * set the low bit of the alternating bit sequence of the address. + */ + if (((type * interleave) > bankwidth) && ((uint8_t)cmd_ofs == 0xaa)) + addr |= (type >> 1)*interleave; + + return addr; } /* @@ -430,7 +446,7 @@ static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t int type, map_word *prev_val) { map_word val; - uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, cfi_interleave(cfi), type); + uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi); val = cfi_build_cmd(cmd, map, cfi); if (prev_val) -- cgit v1.2.3 From 9fcd18c9e63e325dbd2b4c726623f760788d5aa8 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 5 Nov 2008 16:52:08 +0100 Subject: sched: re-tune balancing Impact: improve wakeup affinity on NUMA systems, tweak SMP systems Given the fixes+tweaks to the wakeup-buddy code, re-tweak the domain balancing defaults on NUMA and SMP systems. Turn on SD_WAKE_AFFINE which was off on x86 NUMA - there's no reason why we would not want to have wakeup affinity across nodes as well. (we already do this in the standard NUMA template.) lat_ctx on a NUMA box is particularly happy about this change: before: | phoenix:~/l> ./lat_ctx -s 0 2 | "size=0k ovr=2.60 | 2 5.70 after: | phoenix:~/l> ./lat_ctx -s 0 2 | "size=0k ovr=2.65 | 2 2.07 a 2.75x speedup. pipe-test is similarly happy about it too: | phoenix:~/sched-tests> ./pipe-test | 18.26 usecs/loop. | 14.70 usecs/loop. | 14.38 usecs/loop. | 10.55 usecs/loop. # +WAKE_AFFINE on domain0+domain1 | 8.63 usecs/loop. | 8.59 usecs/loop. | 9.03 usecs/loop. | 8.94 usecs/loop. | 8.96 usecs/loop. | 8.63 usecs/loop. Also: - disable SD_BALANCE_NEWIDLE on NUMA and SMP domains (keep it for siblings) - enable SD_WAKE_BALANCE on SMP domains Sysbench+postgresql improves all around the board, quite significantly: .28-rc3-11474e2c .28-rc3-11474e2c-tune ------------------------------------------------- 1: 571 688 +17.08% 2: 1236 1206 -2.55% 4: 2381 2642 +9.89% 8: 4958 5164 +3.99% 16: 9580 9574 -0.07% 32: 7128 8118 +12.20% 64: 7342 8266 +11.18% 128: 7342 8064 +8.95% 256: 7519 7884 +4.62% 512: 7350 7731 +4.93% ------------------------------------------------- SUM: 55412 59341 +6.62% So it's a win both for the runup portion, the peak area and the tail. Signed-off-by: Ingo Molnar --- arch/x86/include/asm/topology.h | 7 ++++--- include/linux/topology.h | 4 ++-- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 90ac7718469a..4850e4b02b61 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -154,7 +154,7 @@ extern unsigned long node_remap_size[]; #endif -/* sched_domains SD_NODE_INIT for NUMAQ machines */ +/* sched_domains SD_NODE_INIT for NUMA machines */ #define SD_NODE_INIT (struct sched_domain) { \ .min_interval = 8, \ .max_interval = 32, \ @@ -169,8 +169,9 @@ extern unsigned long node_remap_size[]; .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ | SD_BALANCE_FORK \ - | SD_SERIALIZE \ - | SD_WAKE_BALANCE, \ + | SD_WAKE_AFFINE \ + | SD_WAKE_BALANCE \ + | SD_SERIALIZE, \ .last_balance = jiffies, \ .balance_interval = 1, \ } diff --git a/include/linux/topology.h b/include/linux/topology.h index 2158fc0d5a56..34a7ee0ebed2 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -146,10 +146,10 @@ void arch_update_cpu_topology(void); .wake_idx = 1, \ .forkexec_idx = 1, \ .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_NEWIDLE \ - | SD_BALANCE_FORK \ | SD_BALANCE_EXEC \ + | SD_BALANCE_FORK \ | SD_WAKE_AFFINE \ + | SD_WAKE_BALANCE \ | BALANCE_FOR_PKG_POWER,\ .last_balance = jiffies, \ .balance_interval = 1, \ -- cgit v1.2.3 From 6b0eea21efed26f92e18741e54a3121cf5cd197e Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 24 Oct 2008 09:21:05 +0900 Subject: [SCSI] megaraid: fix mega_internal_command oops scsi_cmnd->cmnd was changed from a static array to a pointer post 2.6.25. It breaks mega_internal_command(): static int mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) { ... scb = &adapter->int_scb; memset(scb, 0, sizeof(scb_t)); scmd = &adapter->int_scmd; memset(scmd, 0, sizeof(Scsi_Cmnd)); sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); scmd->device = sdev; scmd->device->host = adapter->host; scmd->host_scribble = (void *)scb; scmd->cmnd[0] = MEGA_INTERNAL_CMD; mega_internal_command() uses scsi_cmnd allocated internally so scmd->cmnd is NULL here. This patch adds a static array for cdb to adapter_t and uses it here. This also uses scsi_allocate_command/scsi_free_command, the recommended way to allocate struct scsi_cmnd since the driver might use sense_buffer in struct scsi_cmnd. Signed-off-by: FUJITA Tomonori Reviewed-by: Boaz Harrosh Tested-by: Pascal Terjan Reported-by: Pascal Terjan Acked-by: "Yang, Bo" Signed-off-by: James Bottomley --- drivers/scsi/megaraid.c | 11 ++++++++--- drivers/scsi/megaraid.h | 2 +- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 28c9da7d4a5c..7dc62deb4087 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4402,6 +4402,10 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) scb_t *scb; int rval; + scmd = scsi_allocate_command(GFP_KERNEL); + if (!scmd) + return -ENOMEM; + /* * The internal commands share one command id and hence are * serialized. This is so because we want to reserve maximum number of @@ -4412,12 +4416,11 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) scb = &adapter->int_scb; memset(scb, 0, sizeof(scb_t)); - scmd = &adapter->int_scmd; - memset(scmd, 0, sizeof(Scsi_Cmnd)); - sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); scmd->device = sdev; + memset(adapter->int_cdb, 0, sizeof(adapter->int_cdb)); + scmd->cmnd = adapter->int_cdb; scmd->device->host = adapter->host; scmd->host_scribble = (void *)scb; scmd->cmnd[0] = MEGA_INTERNAL_CMD; @@ -4456,6 +4459,8 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) mutex_unlock(&adapter->int_mtx); + scsi_free_command(GFP_KERNEL, scmd); + return rval; } diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index ee70bd4ae4ba..795201fa0b48 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -888,8 +888,8 @@ typedef struct { u8 sglen; /* f/w supported scatter-gather list length */ + unsigned char int_cdb[MAX_COMMAND_SIZE]; scb_t int_scb; - Scsi_Cmnd int_scmd; struct mutex int_mtx; /* To synchronize the internal commands */ struct completion int_waitq; /* wait queue for internal -- cgit v1.2.3 From 821b3996001508e872582dcafc7575021f122728 Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Fri, 24 Oct 2008 15:13:44 -0700 Subject: [SCSI] qla2xxx: Correct Atmel flash-part handling. Use correct block size (4K) for erase command 0x20 for Atmel Flash. Use dword addresses for determining sector boundary. Cc: Stable Tree Signed-off-by: Lalit Chandivade Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 1 - drivers/scsi/qla2xxx/qla_sup.c | 19 +++++++------------ 2 files changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index f25f41a499e5..b97194096d8e 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2547,7 +2547,6 @@ typedef struct scsi_qla_host { uint8_t fcode_revision[16]; uint32_t fw_revision[4]; - uint16_t fdt_odd_index; uint32_t fdt_wrt_disable; uint32_t fdt_erase_cmd; uint32_t fdt_block_size; diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 90a13211717f..e4af678eb2d6 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -722,6 +722,7 @@ done: static void qla2xxx_get_fdt_info(scsi_qla_host_t *ha) { +#define FLASH_BLK_SIZE_4K 0x1000 #define FLASH_BLK_SIZE_32K 0x8000 #define FLASH_BLK_SIZE_64K 0x10000 const char *loc, *locations[] = { "MID", "FDT" }; @@ -755,7 +756,6 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *ha) loc = locations[1]; mid = le16_to_cpu(fdt->man_id); fid = le16_to_cpu(fdt->id); - ha->fdt_odd_index = mid == 0x1f; ha->fdt_wrt_disable = fdt->wrt_disable_bits; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0300 | fdt->erase_cmd); ha->fdt_block_size = le32_to_cpu(fdt->block_size); @@ -788,8 +788,7 @@ no_flash_data: ha->fdt_block_size = FLASH_BLK_SIZE_64K; break; case 0x1f: /* Atmel 26DF081A. */ - ha->fdt_odd_index = 1; - ha->fdt_block_size = FLASH_BLK_SIZE_64K; + ha->fdt_block_size = FLASH_BLK_SIZE_4K; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0320); ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(0x0339); ha->fdt_protect_sec_cmd = flash_conf_to_access_addr(0x0336); @@ -801,9 +800,9 @@ no_flash_data: } done: DEBUG2(qla_printk(KERN_DEBUG, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x " - "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n", loc, mid, fid, + "pro=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid, ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd, - ha->fdt_unprotect_sec_cmd, ha->fdt_odd_index, ha->fdt_wrt_disable, + ha->fdt_unprotect_sec_cmd, ha->fdt_wrt_disable, ha->fdt_block_size)); } @@ -987,13 +986,9 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, qla24xx_unprotect_flash(ha); for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { - if (ha->fdt_odd_index) { - findex = faddr << 2; - fdata = findex & sec_mask; - } else { - findex = faddr; - fdata = (findex & sec_mask) << 2; - } + + findex = faddr; + fdata = (findex & sec_mask) << 2; /* Are we at the beginning of a sector? */ if ((findex & rest_addr) == 0) { -- cgit v1.2.3 From 737faece278ffec78612675bc378a4258d8293bb Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 24 Oct 2008 15:13:45 -0700 Subject: [SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space. http://bugzilla.kernel.org/show_bug.cgi?id=9422 Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 24 ++++-------------------- 1 file changed, 4 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index a470f2d3270d..ecf91ad40272 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -140,7 +140,6 @@ int qla2100_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -151,10 +150,7 @@ qla2100_pci_config(scsi_qla_host_t *ha) w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); pci_write_config_word(ha->pdev, PCI_COMMAND, w); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -174,7 +170,6 @@ int qla2300_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags = 0; uint32_t cnt; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -236,10 +231,7 @@ qla2300_pci_config(scsi_qla_host_t *ha) pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -259,7 +251,6 @@ int qla24xx_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags = 0; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; @@ -281,10 +272,7 @@ qla24xx_pci_config(scsi_qla_host_t *ha) if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) pcie_set_readrq(ha->pdev, 2048); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); ha->chip_revision = ha->pdev->revision; @@ -306,7 +294,6 @@ int qla25xx_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; pci_set_master(ha->pdev); pci_try_set_mwi(ha->pdev); @@ -320,10 +307,7 @@ qla25xx_pci_config(scsi_qla_host_t *ha) if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) pcie_set_readrq(ha->pdev, 2048); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); ha->chip_revision = ha->pdev->revision; -- cgit v1.2.3 From 680d7db88ace53c673e1c437c9b6abcc053e8d6f Mon Sep 17 00:00:00 2001 From: Shyam Sundar Date: Fri, 24 Oct 2008 15:13:46 -0700 Subject: [SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below. For 23XX ISPs, max_vports may return an invalid value. Do not honour it. Cc: Stable Tree Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 2 +- drivers/scsi/qla2xxx/qla_mbx.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index ecf91ad40272..4218f20f5ed5 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -964,7 +964,6 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) &ha->fw_minor_version, &ha->fw_subminor_version, &ha->fw_attributes, &ha->fw_memory_size); - qla2x00_resize_request_q(ha); ha->flags.npiv_supported = 0; if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA84XX(ha)) && @@ -976,6 +975,7 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1; } + qla2x00_resize_request_q(ha); if (ql2xallocfwdump) qla2x00_alloc_fw_dump(ha); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 36bc6851e23d..3402746ec128 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -1964,7 +1964,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt, *cur_iocb_cnt = mcp->mb[7]; if (orig_iocb_cnt) *orig_iocb_cnt = mcp->mb[10]; - if (max_npiv_vports) + if (ha->flags.npiv_supported && max_npiv_vports) *max_npiv_vports = mcp->mb[11]; } -- cgit v1.2.3 From 5bff55db3dc4d659f46b4d2fce2f61c1964c2762 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Fri, 24 Oct 2008 15:13:47 -0700 Subject: [SCSI] qla2xxx: Return a FAILED status when abort mailbox-command fails. Mike Reed noted (https://bugzilla.novell.com/show_bug.cgi?id=421330) that the driver was incorrectly returning a SUCCESS status if the driver's request to the firmware to abort a command failed. By doing so, the mid-layer believed, incorrectly, that the command has completed and has been returned (ultimately clearing scsi_cmnd.request_buffer) yet the driver still has the command. What should correctly happen is a mid-layer escalation (device-reset, etc.) of recovery during which the driver will eventually return the outstanding commands to the mid-layer. Cc: Stable Tree Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 21dd182ad512..35567203ef61 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -728,6 +728,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (ha->isp_ops->abort_command(ha, sp)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, ha->host_no)); + ret = FAILED; } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, ha->host_no)); -- cgit v1.2.3 From 3869a1728808fc9e075d0091bb03826fa6ed58b0 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 24 Oct 2008 15:13:48 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k9. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index be5e299df528..eea6720adf16 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k8" +#define QLA2XXX_VERSION "8.02.01-k9" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v1.2.3 From 26816f1c2bf59a269917815adb1d972b9fb65e3a Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:05 +0100 Subject: [SCSI] zfcp: Dont clear reference from SCSI device to unit It is possible that a remote port has a problem, the SCSI device gets deleted after the rport timeout and then the timeout for pending SCSI commands trigger an abort. For this case, don't delete the reference from the SCSI device to the zfcp unit, so that we can still have the reference to issue an abort request. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_scsi.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index ca8f85f3dad4..e46fd3e9f68f 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -24,14 +24,10 @@ char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu) static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) { struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata; - WARN_ON(!unit); - if (unit) { - atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); - sdpnt->hostdata = NULL; - unit->device = NULL; - zfcp_erp_unit_failed(unit, 12, NULL); - zfcp_unit_put(unit); - } + atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); + unit->device = NULL; + zfcp_erp_unit_failed(unit, 12, NULL); + zfcp_unit_put(unit); } static int zfcp_scsi_slave_configure(struct scsi_device *sdp) -- cgit v1.2.3 From 45316a86a67934ab499dcfac44c91aa8f39c4c78 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 4 Nov 2008 16:35:06 +0100 Subject: [SCSI] zfcp: fix req_list_locking. The per adapter req_list_lock must be held with interrupts disabled, otherwise we might end up with nice deadlocks as lockdep tells us (see below). zfcp 0.0.1804: QDIO problem occurred. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 2.6.27-rc8-00035-g4a77035-dirty #86 --------------------------------------------------------- swapper/0 just changed the state of lock: (&adapter->erp_lock){++..}, at: [<00000000002c82ae>] zfcp_erp_adapter_reopen+0x4e/0x8c but this lock took another, hard-irq-unsafe lock in the past: (&adapter->req_list_lock){-+..} and interrupts could create inverse lock ordering between them. [tons of backtraces, but only the interesting part follows] the second lock's dependencies: -> (&adapter->req_list_lock){-+..} ops: 2280627634176 { initial-use at: [<0000000000071f10>] __lock_acquire+0x504/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d7224>] _spin_lock_irqsave+0x6c/0xb0 [<00000000002cf684>] zfcp_fsf_req_dismiss_all+0x50/0x140 [<00000000002c87ee>] zfcp_erp_adapter_strategy_generic+0x66/0x3d0 [<00000000002c9498>] zfcp_erp_thread+0x88c/0x1318 [<000000000001b0d2>] kernel_thread_starter+0x6/0xc [<000000000001b0cc>] kernel_thread_starter+0x0/0xc in-softirq-W at: [<0000000000072172>] __lock_acquire+0x766/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d7224>] _spin_lock_irqsave+0x6c/0xb0 [<00000000002ca73e>] zfcp_qdio_int_resp+0xbe/0x2ac [<000000000027a1d6>] qdio_kick_inbound_handler+0x82/0xa0 [<000000000027daba>] tiqdio_inbound_processing+0x62/0xf8 [<0000000000047ba4>] tasklet_action+0x100/0x1f4 [<0000000000048b5a>] __do_softirq+0xae/0x154 [<0000000000021e4a>] do_softirq+0xea/0xf0 [<00000000000485de>] irq_exit+0xde/0xe8 [<0000000000268c64>] do_IRQ+0x160/0x1fc [<00000000000261a2>] io_return+0x0/0x8 [<000000000001b8f8>] cpu_idle+0x17c/0x224 hardirq-on-W at: [<0000000000072190>] __lock_acquire+0x784/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d702c>] _spin_lock+0x5c/0x9c [<00000000002caff6>] zfcp_fsf_req_send+0x3e/0x158 [<00000000002ce7fe>] zfcp_fsf_exchange_config_data+0x106/0x124 [<00000000002c8948>] zfcp_erp_adapter_strategy_generic+0x1c0/0x3d0 [<00000000002c98ea>] zfcp_erp_thread+0xcde/0x1318 [<000000000001b0d2>] kernel_thread_starter+0x6/0xc [<000000000001b0cc>] kernel_thread_starter+0x0/0xc } ... key at: [<0000000000e356c8>] __key.26629+0x0/0x8 Signed-off-by: Heiko Carstens Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 5ae1d497e5ed..694d9c9ea7cc 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -770,13 +770,14 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; struct zfcp_qdio_queue *req_q = &adapter->req_q; + unsigned long flags; int idx; /* put allocated FSF request into hash table */ - spin_lock(&adapter->req_list_lock); + spin_lock_irqsave(&adapter->req_list_lock, flags); idx = zfcp_reqlist_hash(req->req_id); list_add_tail(&req->list, &adapter->req_list[idx]); - spin_unlock(&adapter->req_list_lock); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); req->qdio_outb_usage = atomic_read(&req_q->count); req->issued = get_clock(); -- cgit v1.2.3 From 88f2a977870af655296a682fe2a58c822cd25bb2 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:07 +0100 Subject: [SCSI] zfcp: fix mempool usage for status_read requests When allocating fsf requests without qtcb, store the pointer to the mempool in the fsf requests for later call to mempool_free. This codepath is only used by the status_read requests. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 694d9c9ea7cc..5e8517fc8b62 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -683,6 +683,7 @@ static struct zfcp_fsf_req *zfcp_fsf_alloc_noqtcb(mempool_t *pool) if (!req) return NULL; memset(req, 0, sizeof(*req)); + req->pool = pool; return req; } -- cgit v1.2.3 From 3765138ae946e6e29b22bf15a9647c600c232639 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:08 +0100 Subject: [SCSI] zfcp: Fix request list handling in error path Fix the handling of the request list in the error path: - Use irqsave for the lock as in the good path. - Before removing the request, check if it is still in the list, a call to dismiss_all might have changed the list in between. - zfcp_qdio_send does not change the queue counters on failure, trying revert something is wrong, so remove this. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 5e8517fc8b62..d024442ee128 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -770,7 +770,6 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter, static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; - struct zfcp_qdio_queue *req_q = &adapter->req_q; unsigned long flags; int idx; @@ -780,19 +779,15 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) list_add_tail(&req->list, &adapter->req_list[idx]); spin_unlock_irqrestore(&adapter->req_list_lock, flags); - req->qdio_outb_usage = atomic_read(&req_q->count); + req->qdio_outb_usage = atomic_read(&adapter->req_q.count); req->issued = get_clock(); if (zfcp_qdio_send(req)) { - /* Queues are down..... */ del_timer(&req->timer); - spin_lock(&adapter->req_list_lock); - zfcp_reqlist_remove(adapter, req); - spin_unlock(&adapter->req_list_lock); - /* undo changes in request queue made for this request */ - atomic_add(req->sbal_number, &req_q->count); - req_q->first -= req->sbal_number; - req_q->first += QDIO_MAX_BUFFERS_PER_Q; - req_q->first %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */ + spin_lock_irqsave(&adapter->req_list_lock, flags); + /* lookup request again, list might have changed */ + if (zfcp_reqlist_find_safe(adapter, req)) + zfcp_reqlist_remove(adapter, req); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); zfcp_erp_adapter_reopen(adapter, 0, 116, req); return -EIO; } -- cgit v1.2.3 From adc90daffbb454eeae00df92855a88ba79b5b636 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:09 +0100 Subject: [SCSI] zfcp: Fix cast warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix leftover from last typecast patch: drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_port_enqueue’: drivers/s390/scsi/zfcp_aux.c:629: warning: format ‘%016llx’ expects type ‘long long unsigned int’, but argument 3 has type ‘u64’ Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_aux.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 3b56220fb900..3d4e3e3f3fc0 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -610,7 +610,8 @@ struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn, atomic_set_mask(status | ZFCP_STATUS_COMMON_REMOVE, &port->status); atomic_set(&port->refcount, 0); - dev_set_name(&port->sysfs_device, "0x%016llx", wwpn); + dev_set_name(&port->sysfs_device, "0x%016llx", + (unsigned long long)wwpn); port->sysfs_device.parent = &adapter->ccw_device->dev; port->sysfs_device.release = zfcp_sysfs_port_release; -- cgit v1.2.3 From 77fd9494bce3188c20d82e45464ed9b1be83bf98 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:10 +0100 Subject: [SCSI] zfcp: Wait for port scan to complete when setting adapter online Attaching a unit immediately after setting the adapter online should be possible. The problem right now is that the port_scan runs from a workqueue and has not finished when the set_online call returns and the sysfs structures for the ports are not available yet. Fix that by waiting for the port scan to complete. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_ccw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index b04038c74786..951a8d409d1d 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -116,7 +116,9 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device) zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, 85, NULL); zfcp_erp_wait(adapter); - goto out; + up(&zfcp_data.config_sema); + flush_work(&adapter->scan_work); + return 0; out_scsi_register: zfcp_erp_thread_kill(adapter); -- cgit v1.2.3 From 7ea633ffad0bcb0b3e0deee81997d07f292e7f44 Mon Sep 17 00:00:00 2001 From: Martin Petermann Date: Tue, 4 Nov 2008 16:35:11 +0100 Subject: [SCSI] zfcp: fix erp timeout cleanup for port open requests If an open port fsf request times out (in erp) the corresponding erp_action member of the fsf request need to set to NULL. If the port structure will be removed later-on there will be still a reference in the fsf request to the non existing erp_action otherwise. Signed-off-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_erp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 9040f738ff33..35364f64da7f 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -472,6 +472,7 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act) ZFCP_STATUS_ERP_TIMEDOUT)) { act->fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; zfcp_rec_dbf_event_action(142, act); + act->fsf_req->erp_action = NULL; } if (act->status & ZFCP_STATUS_ERP_TIMEDOUT) zfcp_rec_dbf_event_action(143, act); -- cgit v1.2.3 From d94ce6c6e99252ab2ba340b0398c8651713a9f05 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:12 +0100 Subject: [SCSI] zfcp: Fix hexdump data in s390dbf traces Fix multiple problems found in the hexdump data: - length calculation was wrong, traces were incomplete - FC payloads were dumped in different record than the output function tried to read - minor fixes in output - allow complete RSCN traces (up to 1024 bytes according to spec) Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_dbf.c | 42 ++++++++++++++++-------------------------- drivers/s390/scsi/zfcp_dbf.h | 8 ++------ 2 files changed, 18 insertions(+), 32 deletions(-) diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index 060f5f2352ec..31012d58cfb7 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -30,7 +30,7 @@ static void zfcp_dbf_hexdump(debug_info_t *dbf, void *to, int to_len, dump->offset = offset; dump->size = min(from_len - offset, room); memcpy(dump->data, from + offset, dump->size); - debug_event(dbf, level, dump, dump->size); + debug_event(dbf, level, dump, dump->size + sizeof(*dump)); } } @@ -108,7 +108,7 @@ static int zfcp_dbf_view_header(debug_info_t *id, struct debug_view *view, t.tv_sec, t.tv_nsec); zfcp_dbf_out(&p, "cpu", "%02i", entry->id.fields.cpuid); } else { - zfcp_dbf_outd(&p, NULL, dump->data, dump->size, dump->offset, + zfcp_dbf_outd(&p, "", dump->data, dump->size, dump->offset, dump->total_size); if ((dump->offset + dump->size) == dump->total_size) p += sprintf(p, "\n"); @@ -366,6 +366,7 @@ static void zfcp_hba_dbf_view_response(char **p, break; zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd); zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial); + p += sprintf(*p, "\n"); break; case FSF_QTCB_OPEN_PORT_WITH_DID: @@ -465,7 +466,8 @@ static int zfcp_hba_dbf_view_format(debug_info_t *id, struct debug_view *view, else if (strncmp(r->tag, "berr", ZFCP_DBF_TAG_SIZE) == 0) zfcp_hba_dbf_view_berr(&p, &r->u.berr); - p += sprintf(p, "\n"); + if (strncmp(r->tag, "resp", ZFCP_DBF_TAG_SIZE) != 0) + p += sprintf(p, "\n"); return p - out_buf; } @@ -880,6 +882,7 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req) struct ct_hdr *hdr = sg_virt(ct->req); struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf; struct zfcp_san_dbf_record_ct_request *oct = &r->u.ct_req; + int level = 3; unsigned long flags; spin_lock_irqsave(&adapter->san_dbf_lock, flags); @@ -896,9 +899,10 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req) oct->options = hdr->options; oct->max_res_size = hdr->max_res_size; oct->len = min((int)ct->req->length - (int)sizeof(struct ct_hdr), - ZFCP_DBF_CT_PAYLOAD); - memcpy(oct->payload, (void *)hdr + sizeof(struct ct_hdr), oct->len); - debug_event(adapter->san_dbf, 3, r, sizeof(*r)); + ZFCP_DBF_SAN_MAX_PAYLOAD); + debug_event(adapter->san_dbf, level, r, sizeof(*r)); + zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level, + (void *)hdr + sizeof(struct ct_hdr), oct->len); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -914,6 +918,7 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req) struct ct_hdr *hdr = sg_virt(ct->resp); struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf; struct zfcp_san_dbf_record_ct_response *rct = &r->u.ct_resp; + int level = 3; unsigned long flags; spin_lock_irqsave(&adapter->san_dbf_lock, flags); @@ -929,9 +934,10 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req) rct->expl = hdr->reason_code_expl; rct->vendor_unique = hdr->vendor_unique; rct->len = min((int)ct->resp->length - (int)sizeof(struct ct_hdr), - ZFCP_DBF_CT_PAYLOAD); - memcpy(rct->payload, (void *)hdr + sizeof(struct ct_hdr), rct->len); - debug_event(adapter->san_dbf, 3, r, sizeof(*r)); + ZFCP_DBF_SAN_MAX_PAYLOAD); + debug_event(adapter->san_dbf, level, r, sizeof(*r)); + zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level, + (void *)hdr + sizeof(struct ct_hdr), rct->len); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -954,7 +960,7 @@ static void zfcp_san_dbf_event_els(const char *tag, int level, rec->u.els.ls_code = ls_code; debug_event(adapter->san_dbf, level, rec, sizeof(*rec)); zfcp_dbf_hexdump(adapter->san_dbf, rec, sizeof(*rec), level, - buffer, min(buflen, ZFCP_DBF_ELS_MAX_PAYLOAD)); + buffer, min(buflen, ZFCP_DBF_SAN_MAX_PAYLOAD)); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -1008,8 +1014,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, char *out_buf, const char *in_buf) { struct zfcp_san_dbf_record *r = (struct zfcp_san_dbf_record *)in_buf; - char *buffer = NULL; - int buflen = 0, total = 0; char *p = out_buf; if (strncmp(r->tag, "dump", ZFCP_DBF_TAG_SIZE) == 0) @@ -1029,9 +1033,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, zfcp_dbf_out(&p, "gs_subtype", "0x%02x", ct->gs_subtype); zfcp_dbf_out(&p, "options", "0x%02x", ct->options); zfcp_dbf_out(&p, "max_res_size", "0x%04x", ct->max_res_size); - total = ct->len; - buffer = ct->payload; - buflen = min(total, ZFCP_DBF_CT_PAYLOAD); } else if (strncmp(r->tag, "rctc", ZFCP_DBF_TAG_SIZE) == 0) { struct zfcp_san_dbf_record_ct_response *ct = &r->u.ct_resp; zfcp_dbf_out(&p, "cmd_rsp_code", "0x%04x", ct->cmd_rsp_code); @@ -1039,23 +1040,12 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, zfcp_dbf_out(&p, "reason_code", "0x%02x", ct->reason_code); zfcp_dbf_out(&p, "reason_code_expl", "0x%02x", ct->expl); zfcp_dbf_out(&p, "vendor_unique", "0x%02x", ct->vendor_unique); - total = ct->len; - buffer = ct->payload; - buflen = min(total, ZFCP_DBF_CT_PAYLOAD); } else if (strncmp(r->tag, "oels", ZFCP_DBF_TAG_SIZE) == 0 || strncmp(r->tag, "rels", ZFCP_DBF_TAG_SIZE) == 0 || strncmp(r->tag, "iels", ZFCP_DBF_TAG_SIZE) == 0) { struct zfcp_san_dbf_record_els *els = &r->u.els; zfcp_dbf_out(&p, "ls_code", "0x%02x", els->ls_code); - total = els->len; - buffer = els->payload; - buflen = min(total, ZFCP_DBF_ELS_PAYLOAD); } - - zfcp_dbf_outd(&p, "payload", buffer, buflen, 0, total); - if (buflen == total) - p += sprintf(p, "\n"); - return p - out_buf; } diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h index e8f450801fea..5d6b2dff855b 100644 --- a/drivers/s390/scsi/zfcp_dbf.h +++ b/drivers/s390/scsi/zfcp_dbf.h @@ -163,8 +163,6 @@ struct zfcp_san_dbf_record_ct_request { u8 options; u16 max_res_size; u32 len; -#define ZFCP_DBF_CT_PAYLOAD 24 - u8 payload[ZFCP_DBF_CT_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record_ct_response { @@ -174,15 +172,11 @@ struct zfcp_san_dbf_record_ct_response { u8 expl; u8 vendor_unique; u32 len; - u8 payload[ZFCP_DBF_CT_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record_els { u8 ls_code; u32 len; -#define ZFCP_DBF_ELS_PAYLOAD 32 -#define ZFCP_DBF_ELS_MAX_PAYLOAD 1024 - u8 payload[ZFCP_DBF_ELS_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record { @@ -196,6 +190,8 @@ struct zfcp_san_dbf_record { struct zfcp_san_dbf_record_ct_response ct_resp; struct zfcp_san_dbf_record_els els; } u; +#define ZFCP_DBF_SAN_MAX_PAYLOAD 1024 + u8 payload[32]; } __attribute__ ((packed)); struct zfcp_scsi_dbf_record { -- cgit v1.2.3 From 939c2288c35132fe340b2694c7d02cacf7593723 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 4 Nov 2008 19:47:19 -0600 Subject: [SCSI] scsi_error regression: Fix idempotent command handling Drivers want to be able to return DID_TRANSPORT_DISRUPTED and have it do the right thing for commands like tape and passthrouh as far as retries go. The LLDs previously used DID_BUS_BUSY or DID_ERROR which followed the cmd->retries limit, but DID_TRANSPORT_DISRUPTED was skipping that check so it could have caused a problem with tape commands. This patch has DID_TRANSPORT_DISRUPTED check the cmd->retries/cmd->allowed. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 94ed262bdf0c..386361778ebb 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1340,9 +1340,10 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * LLD/transport was disrupted during processing of the IO. * The transport class is now blocked/blocking, * and the transport will decide what to do with the IO - * based on its timers and recovery capablilities. + * based on its timers and recovery capablilities if + * there are enough retries. */ - return ADD_TO_MLQUEUE; + goto maybe_retry; case DID_TRANSPORT_FAILFAST: /* * The transport decided to failfast the IO (most likely -- cgit v1.2.3 From 7f3abf5c7c9a9febdd643b9d4005382144525475 Mon Sep 17 00:00:00 2001 From: Vladimir Sokolovsky Date: Wed, 5 Nov 2008 10:56:52 -0800 Subject: IB/mlx4: Set umem field to NULL in mlx4_ib_alloc_fast_reg_mr() Set mr->umem to NULL in mlx4_ib_alloc_fast_reg_mr(). Otherwise ib_dereg_mr() may invoke ib_umem_release() on a random pointer value and get an oops. Signed-off-by: Vladimir Sokolovsky Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/mr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index 87f5c5a87b98..8e4d26d56a95 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -205,6 +205,7 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd, goto err_mr; mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key; + mr->umem = NULL; return &mr->ibmr; -- cgit v1.2.3 From 517ac45af4b55913587279d89001171c222f22e7 Mon Sep 17 00:00:00 2001 From: Tom Tucker Date: Thu, 23 Oct 2008 16:30:13 -0500 Subject: 9p: rdma: Set trans prior to requesting async connection ops The RDMA connection manager is fundamentally asynchronous. Since the async callback context is the client pointer, the transport in the client struct needs to be set prior to calling the first async op. Signed-off-by: Tom Tucker Signed-off-by: Eric Van Hensbergen --- net/9p/trans_rdma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c index 8d6cc4777aae..4e9d2e673cf4 100644 --- a/net/9p/trans_rdma.c +++ b/net/9p/trans_rdma.c @@ -589,6 +589,9 @@ rdma_create_trans(struct p9_client *client, const char *addr, char *args) if (IS_ERR(rdma->cm_id)) goto error; + /* Associate the client with the transport */ + client->trans = rdma; + /* Resolve the server's address */ rdma->addr.sin_family = AF_INET; rdma->addr.sin_addr.s_addr = in_aton(addr); @@ -669,7 +672,6 @@ rdma_create_trans(struct p9_client *client, const char *addr, char *args) if (err || (rdma->state != P9_RDMA_CONNECTED)) goto error; - client->trans = rdma; client->status = Connected; return 0; -- cgit v1.2.3 From cac23d6505546f4cfa42d949ec46d431a44bd39c Mon Sep 17 00:00:00 2001 From: Tom Tucker Date: Thu, 23 Oct 2008 16:31:02 -0500 Subject: 9p: Make all client spin locks IRQ safe The client lock must be IRQ safe. Some of the lock acquisition paths took regular spin locks. Signed-off-by: Tom Tucker Signed-off-by: Eric Van Hensbergen --- net/9p/client.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/9p/client.c b/net/9p/client.c index 67717f69412e..f4e6c05b3c68 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -613,6 +613,7 @@ static struct p9_fid *p9_fid_create(struct p9_client *clnt) { int err; struct p9_fid *fid; + unsigned long flags; P9_DPRINTK(P9_DEBUG_FID, "clnt %p\n", clnt); fid = kmalloc(sizeof(struct p9_fid), GFP_KERNEL); @@ -632,9 +633,9 @@ static struct p9_fid *p9_fid_create(struct p9_client *clnt) fid->clnt = clnt; fid->aux = NULL; - spin_lock(&clnt->lock); + spin_lock_irqsave(&clnt->lock, flags); list_add(&fid->flist, &clnt->fidlist); - spin_unlock(&clnt->lock); + spin_unlock_irqrestore(&clnt->lock, flags); return fid; @@ -646,13 +647,14 @@ error: static void p9_fid_destroy(struct p9_fid *fid) { struct p9_client *clnt; + unsigned long flags; P9_DPRINTK(P9_DEBUG_FID, "fid %d\n", fid->fid); clnt = fid->clnt; p9_idpool_put(fid->fid, clnt->fidpool); - spin_lock(&clnt->lock); + spin_lock_irqsave(&clnt->lock, flags); list_del(&fid->flist); - spin_unlock(&clnt->lock); + spin_unlock_irqrestore(&clnt->lock, flags); kfree(fid); } -- cgit v1.2.3 From 82b189eaaf6186b7694317632255fa87460820a0 Mon Sep 17 00:00:00 2001 From: Tom Tucker Date: Thu, 23 Oct 2008 16:32:28 -0500 Subject: 9p: Remove unneeded free of fcall for Flush T and R fcall are reused until the client is destroyed. There does not need to be a special case for Flush Signed-off-by: Tom Tucker Signed-off-by: Eric Van Hensbergen --- net/9p/client.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/net/9p/client.c b/net/9p/client.c index f4e6c05b3c68..26ca8ab45196 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -311,12 +311,6 @@ static void p9_free_req(struct p9_client *c, struct p9_req_t *r) r->status = REQ_STATUS_IDLE; if (tag != P9_NOTAG && p9_idpool_check(tag, c->tagpool)) p9_idpool_put(tag, c->tagpool); - - /* if this was a flush request we have to free response fcall */ - if (r->rc->id == P9_RFLUSH) { - kfree(r->tc); - kfree(r->rc); - } } /** -- cgit v1.2.3 From 45abdf1c7be80d6ec3b0b14e59ee75a0d5d9fb37 Mon Sep 17 00:00:00 2001 From: Tom Tucker Date: Thu, 23 Oct 2008 16:33:25 -0500 Subject: p9: Fix leak of waitqueue in request allocation path If a T or R fcall cannot be allocated, the function returns an error but neglects to free the wait queue that was successfully allocated. If it comes through again a second time this wq will be overwritten with a new allocation and the old allocation will be leaked. Also, if the client is subsequently closed, the close path will attempt to clean up these allocations, so set the req fields to NULL to avoid duplicate free. Signed-off-by: Tom Tucker Signed-off-by: Eric Van Hensbergen --- net/9p/client.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/9p/client.c b/net/9p/client.c index 26ca8ab45196..b56d808e63a9 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -189,6 +189,9 @@ static struct p9_req_t *p9_tag_alloc(struct p9_client *c, u16 tag) printk(KERN_ERR "Couldn't grow tag array\n"); kfree(req->tc); kfree(req->rc); + kfree(req->wq); + req->tc = req->rc = NULL; + req->wq = NULL; return ERR_PTR(-ENOMEM); } req->tc->sdata = (char *) req->tc + sizeof(struct p9_fcall); -- cgit v1.2.3 From 1558c6214904c636d5a37f05f84202d6cdd9cff8 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Mon, 27 Oct 2008 13:15:16 -0500 Subject: 9p: rdma: remove duplicated #include Removed duplicated #include in net/9p/trans_rdma.c. Signed-off-by: Huang Weiyi Signed-off-by: Eric Van Hensbergen --- net/9p/trans_rdma.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c index 4e9d2e673cf4..2f1fe5fc1228 100644 --- a/net/9p/trans_rdma.c +++ b/net/9p/trans_rdma.c @@ -45,7 +45,6 @@ #include #include #include -#include #define P9_PORT 5640 #define P9_RDMA_SQ_DEPTH 32 -- cgit v1.2.3 From 9f3e9bbe62b0bdbbaa7c689a68a22a7d3c1670f0 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 28 Oct 2008 14:22:43 -0500 Subject: unsigned fid->fid cannot be negative Signed-off-by: Roel Kluin Signed-off-by: Eric Van Hensbergen --- net/9p/client.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/9p/client.c b/net/9p/client.c index b56d808e63a9..6e800dd51f09 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -608,7 +608,7 @@ reterr: static struct p9_fid *p9_fid_create(struct p9_client *clnt) { - int err; + int ret; struct p9_fid *fid; unsigned long flags; @@ -617,11 +617,12 @@ static struct p9_fid *p9_fid_create(struct p9_client *clnt) if (!fid) return ERR_PTR(-ENOMEM); - fid->fid = p9_idpool_get(clnt->fidpool); + ret = p9_idpool_get(clnt->fidpool); if (fid->fid < 0) { - err = -ENOSPC; + ret = -ENOSPC; goto error; } + fid->fid = ret; memset(&fid->qid, 0, sizeof(struct p9_qid)); fid->mode = -1; @@ -638,7 +639,7 @@ static struct p9_fid *p9_fid_create(struct p9_client *clnt) error: kfree(fid); - return ERR_PTR(err); + return ERR_PTR(ret); } static void p9_fid_destroy(struct p9_fid *fid) -- cgit v1.2.3 From b0d5fdef521b1eadb3fc2c1283000af7ef0297bc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Nov 2008 20:46:46 -0800 Subject: net/9p: fix printk format warnings Fix printk format warnings in net/9p. Built cleanly on 7 arches. net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64' Signed-off-by: Randy Dunlap Signed-off-by: Eric Van Hensbergen --- net/9p/client.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/net/9p/client.c b/net/9p/client.c index 6e800dd51f09..4b529454616d 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -818,7 +818,9 @@ struct p9_fid *p9_client_attach(struct p9_client *clnt, struct p9_fid *afid, } P9_DPRINTK(P9_DEBUG_9P, "<<< RATTACH qid %x.%llx.%x\n", - qid.type, qid.path, qid.version); + qid.type, + (unsigned long long)qid.path, + qid.version); memmove(&fid->qid, &qid, sizeof(struct p9_qid)); @@ -865,7 +867,9 @@ p9_client_auth(struct p9_client *clnt, char *uname, u32 n_uname, char *aname) } P9_DPRINTK(P9_DEBUG_9P, "<<< RAUTH qid %x.%llx.%x\n", - qid.type, qid.path, qid.version); + qid.type, + (unsigned long long)qid.path, + qid.version); memmove(&afid->qid, &qid, sizeof(struct p9_qid)); p9_free_req(clnt, req); @@ -930,7 +934,8 @@ struct p9_fid *p9_client_walk(struct p9_fid *oldfid, int nwname, char **wnames, for (count = 0; count < nwqids; count++) P9_DPRINTK(P9_DEBUG_9P, "<<< [%d] %x.%llx.%x\n", - count, wqids[count].type, wqids[count].path, + count, wqids[count].type, + (unsigned long long)wqids[count].path, wqids[count].version); if (nwname) @@ -980,7 +985,9 @@ int p9_client_open(struct p9_fid *fid, int mode) } P9_DPRINTK(P9_DEBUG_9P, "<<< ROPEN qid %x.%llx.%x iounit %x\n", - qid.type, qid.path, qid.version, iounit); + qid.type, + (unsigned long long)qid.path, + qid.version, iounit); fid->mode = mode; fid->iounit = iounit; @@ -1023,7 +1030,9 @@ int p9_client_fcreate(struct p9_fid *fid, char *name, u32 perm, int mode, } P9_DPRINTK(P9_DEBUG_9P, "<<< RCREATE qid %x.%llx.%x iounit %x\n", - qid.type, qid.path, qid.version, iounit); + qid.type, + (unsigned long long)qid.path, + qid.version, iounit); fid->mode = mode; fid->iounit = iounit; @@ -1230,9 +1239,9 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid) "<<< name=%s uid=%s gid=%s muid=%s extension=(%s)\n" "<<< uid=%d gid=%d n_muid=%d\n", ret->size, ret->type, ret->dev, ret->qid.type, - ret->qid.path, ret->qid.version, ret->mode, - ret->atime, ret->mtime, ret->length, ret->name, - ret->uid, ret->gid, ret->muid, ret->extension, + (unsigned long long)ret->qid.path, ret->qid.version, ret->mode, + ret->atime, ret->mtime, (unsigned long long)ret->length, + ret->name, ret->uid, ret->gid, ret->muid, ret->extension, ret->n_uid, ret->n_gid, ret->n_muid); free_and_error: @@ -1255,9 +1264,9 @@ int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst) " name=%s uid=%s gid=%s muid=%s extension=(%s)\n" " uid=%d gid=%d n_muid=%d\n", wst->size, wst->type, wst->dev, wst->qid.type, - wst->qid.path, wst->qid.version, wst->mode, - wst->atime, wst->mtime, wst->length, wst->name, - wst->uid, wst->gid, wst->muid, wst->extension, + (unsigned long long)wst->qid.path, wst->qid.version, wst->mode, + wst->atime, wst->mtime, (unsigned long long)wst->length, + wst->name, wst->uid, wst->gid, wst->muid, wst->extension, wst->n_uid, wst->n_gid, wst->n_muid); err = 0; clnt = fid->clnt; -- cgit v1.2.3 From dc8a0843a435b2c0891e7eaea64faaf1ebec9b11 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 5 Nov 2008 23:21:16 +0100 Subject: [JFFS2] fix race condition in jffs2_lzo_compress() deflate_mutex protects the globals lzo_mem and lzo_compress_buf. However, jffs2_lzo_compress() unlocks deflate_mutex _before_ it has copied out the compressed data from lzo_compress_buf. Correct this by moving the mutex unlock after the copy. In addition, document what deflate_mutex actually protects. Cc: stable@kernel.org Signed-off-by: Geert Uytterhoeven Acked-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- fs/jffs2/compr_lzo.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/fs/jffs2/compr_lzo.c b/fs/jffs2/compr_lzo.c index 47b045797e42..90cb60d09787 100644 --- a/fs/jffs2/compr_lzo.c +++ b/fs/jffs2/compr_lzo.c @@ -19,7 +19,7 @@ static void *lzo_mem; static void *lzo_compress_buf; -static DEFINE_MUTEX(deflate_mutex); +static DEFINE_MUTEX(deflate_mutex); /* for lzo_mem and lzo_compress_buf */ static void free_workspace(void) { @@ -49,18 +49,21 @@ static int jffs2_lzo_compress(unsigned char *data_in, unsigned char *cpage_out, mutex_lock(&deflate_mutex); ret = lzo1x_1_compress(data_in, *sourcelen, lzo_compress_buf, &compress_size, lzo_mem); - mutex_unlock(&deflate_mutex); - if (ret != LZO_E_OK) - return -1; + goto fail; if (compress_size > *dstlen) - return -1; + goto fail; memcpy(cpage_out, lzo_compress_buf, compress_size); - *dstlen = compress_size; + mutex_unlock(&deflate_mutex); + *dstlen = compress_size; return 0; + + fail: + mutex_unlock(&deflate_mutex); + return -1; } static int jffs2_lzo_decompress(unsigned char *data_in, unsigned char *cpage_out, -- cgit v1.2.3 From c78d0cf2925bffae8a6f00e7d9b8e971b0392edd Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 5 Nov 2008 12:04:46 +0000 Subject: x86: don't allow nr_irqs > NR_IRQS Impact: fix boot hang on 32-bit systems with more than 224 IO-APIC pins On some 32-bit systems with a lot of IO-APICs probe_nr_irqs() can return a value larger than NR_IRQS. This will lead to probe_irq_on() overrunning the irq_desc array. I hit this when running net-next-2.6 (close to 2.6.28-rc3) on a Supermicro dual Xeon system. NR_IRQS is 224 but probe_nr_irqs() detects 5 IOAPICs and returns 240. Here are the log messages: Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Tue Nov 4 16:53:47 2008 IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x02] address[0xfec81000] gsi_base[24]) Tue Nov 4 16:53:47 2008 IOAPIC[1]: apic_id 2, version 32, address 0xfec81000, GSI 24-47 Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x03] address[0xfec81400] gsi_base[48]) Tue Nov 4 16:53:47 2008 IOAPIC[2]: apic_id 3, version 32, address 0xfec81400, GSI 48-71 Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x04] address[0xfec82000] gsi_base[72]) Tue Nov 4 16:53:47 2008 IOAPIC[3]: apic_id 4, version 32, address 0xfec82000, GSI 72-95 Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x05] address[0xfec82400] gsi_base[96]) Tue Nov 4 16:53:47 2008 IOAPIC[4]: apic_id 5, version 32, address 0xfec82400, GSI 96-119 Tue Nov 4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Tue Nov 4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Tue Nov 4 16:53:47 2008 Enabling APIC mode: Flat. Using 5 I/O APICs Signed-off-by: Ben Hutchings Acked-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c index b764d7429c61..7a3f2028e2eb 100644 --- a/arch/x86/kernel/io_apic.c +++ b/arch/x86/kernel/io_apic.c @@ -3611,6 +3611,8 @@ int __init probe_nr_irqs(void) /* something wrong ? */ if (nr < nr_min) nr = nr_min; + if (WARN_ON(nr > NR_IRQS)) + nr = NR_IRQS; return nr; } -- cgit v1.2.3 From 1b4897688011cd05e07f00dcfe6af3331eb36a3c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 4 Nov 2008 14:10:13 -0800 Subject: x86: size NR_IRQS on 32-bit systems the same way as 64-bit Impact: make NR_IRQS big enough for system with lots of apic/pins If lots of IO_APIC's are there (or can be there), size the same way as 64-bit, depending on MAX_IO_APICS and NR_CPUS. This fixes the boot problem reported by Ben Hutchings on a 32-bit server with 5 IO-APICs and 240 IO-APIC pins. Signed-off-by: Yinghai Tested-by: Ben Hutchings Signed-off-by: Ingo Molnar --- arch/x86/include/asm/irq_vectors.h | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index d843ed0e9b2e..503aadc4ad35 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -101,30 +101,22 @@ #define LAST_VM86_IRQ 15 #define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) -#ifdef CONFIG_X86_64 +#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_PARAVIRT) && !defined(CONFIG_X86_VISWS) && !defined(CONFIG_X86_VOYAGER) # if NR_CPUS < MAX_IO_APICS # define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) # else # define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) # endif -#elif !defined(CONFIG_X86_VOYAGER) +#elif defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS) || defined(CONFIG_X86_VOYAGER) -# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS) - -# define NR_IRQS 224 - -# else /* IO_APIC || PARAVIRT */ - -# define NR_IRQS 16 - -# endif +# define NR_IRQS 224 -#else /* !VISWS && !VOYAGER */ +#else /* IO_APIC || PARAVIRT */ -# define NR_IRQS 224 +# define NR_IRQS 16 -#endif /* VISWS */ +#endif /* Voyager specific defines */ /* These define the CPIs we use in linux */ -- cgit v1.2.3 From cb3ac42b8af357fdd9ad838234245b39e5bdb7fe Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 6 Nov 2008 17:28:01 +1100 Subject: md: revert the recent addition of a call to the BLKRRPART ioctl. It turns out that it is only safe to call blkdev_ioctl when the device is actually open (as ->bd_disk is set to NULL on last close). And it is quite possible for do_md_stop to be called when the device is not open. So discard the call to blkdev_ioctl(BLKRRPART) which was added in commit 934d9c23b4c7e31840a895ba4b7e88d6413c81f3 It is just as easy to call this ioctl from userspace when needed (on mdadm -S) so leave it out of the kernel Signed-off-by: NeilBrown --- drivers/md/md.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 9abf6ed16535..1b1d32694f6f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3884,7 +3884,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) if (mode == 0) { mdk_rdev_t *rdev; struct list_head *tmp; - struct block_device *bdev; printk(KERN_INFO "md: %s stopped.\n", mdname(mddev)); @@ -3941,11 +3940,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) mddev->degraded = 0; mddev->barriers_work = 0; mddev->safemode = 0; - bdev = bdget_disk(mddev->gendisk, 0); - if (bdev) { - blkdev_ioctl(bdev, 0, BLKRRPART, 0); - bdput(bdev); - } kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE); } else if (mddev->pers) -- cgit v1.2.3 From a53a6c85756339f82ff19e001e90cfba2d6299a8 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 6 Nov 2008 17:28:20 +1100 Subject: md: fix bug in raid10 recovery. Adding a spare to a raid10 doesn't cause recovery to start. This is due to an silly type in commit 6c2fce2ef6b4821c21b5c42c7207cb9cf8c87eda and so is a bug in 2.6.27 and .28-rc. Thanks to Thomas Backlund for bisecting to find this. Cc: Thomas Backlund Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/raid10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index da5129a24b18..970a96ef9b18 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1137,7 +1137,7 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) if (!enough(conf)) return -EINVAL; - if (rdev->raid_disk) + if (rdev->raid_disk >= 0) first = last = rdev->raid_disk; if (rdev->saved_raid_disk >= 0 && -- cgit v1.2.3 From da85f865b1dcec0853c48b763ed312441ce0c7df Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 13:37:27 -0600 Subject: x86: mention ACPI in top-level Kconfig menu Impact: clarify menuconfig text Mention ACPI in the top-level menu to give a clue as to where it lives. This matches what ia64 does. Signed-off-by: Bjorn Helgaas Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6f20718d3156..5d6aa4013dc7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1494,7 +1494,7 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool X86_64 depends on NUMA -menu "Power management options" +menu "Power management and ACPI options" depends on !X86_VOYAGER config ARCH_HIBERNATION_HEADER -- cgit v1.2.3 From 43381785a5ba1cb424b36812373a6a04054b5c3c Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 20 Oct 2008 15:43:43 +0200 Subject: block: remove unused ll_new_mergeable() Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- block/blk-merge.c | 21 --------------------- 1 file changed, 21 deletions(-) diff --git a/block/blk-merge.c b/block/blk-merge.c index 8681cd6f9911..b92f5b0866b0 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -222,27 +222,6 @@ new_segment: } EXPORT_SYMBOL(blk_rq_map_sg); -static inline int ll_new_mergeable(struct request_queue *q, - struct request *req, - struct bio *bio) -{ - int nr_phys_segs = bio_phys_segments(q, bio); - - if (req->nr_phys_segments + nr_phys_segs > q->max_phys_segments) { - req->cmd_flags |= REQ_NOMERGE; - if (req == q->last_merge) - q->last_merge = NULL; - return 0; - } - - /* - * A hw segment is just getting larger, bump just the phys - * counter. - */ - req->nr_phys_segments += nr_phys_segs; - return 1; -} - static inline int ll_new_hw_segment(struct request_queue *q, struct request *req, struct bio *bio) -- cgit v1.2.3 From f92131c3dd567fc6df18ce3f46fcf57ecbdefbe0 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 29 Oct 2008 14:10:51 +0100 Subject: bio: define __BIOVEC_PHYS_MERGEABLE Define __BIOVEC_PHYS_MERGEABLE as the default implementation of BIOVEC_PHYS_MERGEABLE, so that its available for reuse within an arch-specific definition of BIOVEC_PHYS_MERGEABLE. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- include/linux/bio.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/include/linux/bio.h b/include/linux/bio.h index 1c91a176b9ae..6a642098e5c3 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -236,12 +236,16 @@ static inline void *bio_data(struct bio *bio) #define __BVEC_END(bio) bio_iovec_idx((bio), (bio)->bi_vcnt - 1) #define __BVEC_START(bio) bio_iovec_idx((bio), (bio)->bi_idx) +/* Default implementation of BIOVEC_PHYS_MERGEABLE */ +#define __BIOVEC_PHYS_MERGEABLE(vec1, vec2) \ + ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) + /* * allow arch override, for eg virtualized architectures (put in asm/io.h) */ #ifndef BIOVEC_PHYS_MERGEABLE #define BIOVEC_PHYS_MERGEABLE(vec1, vec2) \ - ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) + __BIOVEC_PHYS_MERGEABLE(vec1, vec2) #endif #define __BIO_SEG_BOUNDARY(addr1, addr2, mask) \ -- cgit v1.2.3 From 2920ebbd65f3e80c318adf5191ac0987142bda80 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 30 Oct 2008 08:32:29 +0100 Subject: block: add timer on blkdev_dequeue_request() not elv_next_request() Block queue supports two usage models - one where block driver peeks at the front of queue using elv_next_request(), processes it and finishes it and the other where block driver peeks at the front of queue, dequeue the request using blkdev_dequeue_request() and finishes it. The latter is more flexible as it allows the driver to process multiple commands concurrently. These two inconsistent usage models affect the block layer implementation confusing. For some, elv_next_request() is considered the issue point while others consider blkdev_dequeue_request() the issue point. Till now the inconsistency mostly affect only accounting, so it didn't really break anything seriously; however, with block layer timeout, this inconsistency hits hard. Block layer considers elv_next_request() the issue point and adds timer but SCSI layer thinks it was just peeking and when the request can't process the command right away, it's just left there without further processing. This makes the request dangling on the timer list and, when the timer goes off, the request which the SCSI layer and below think is still on the block queue ends up in the EH queue, causing various problems - EH hang (failed count goes over busy count and EH never wakes up), WARN_ON() and oopses as low level driver trying to handle the unknown command, etc. depending on the timing. As SCSI midlayer is the only user of block layer timer at the moment, moving blk_add_timer() to elv_dequeue_request() fixes the problem; however, this two usage models definitely need to be cleaned up in the future. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- block/elevator.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/block/elevator.c b/block/elevator.c index 59173a69ebdf..9ac82dde99dd 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -773,12 +773,6 @@ struct request *elv_next_request(struct request_queue *q) */ rq->cmd_flags |= REQ_STARTED; blk_add_trace_rq(q, rq, BLK_TA_ISSUE); - - /* - * We are now handing the request to the hardware, - * add the timeout handler - */ - blk_add_timer(rq); } if (!q->boundary_rq || q->boundary_rq == rq) { @@ -850,6 +844,12 @@ void elv_dequeue_request(struct request_queue *q, struct request *rq) */ if (blk_account_rq(rq)) q->in_flight++; + + /* + * We are now handing the request to the hardware, add the + * timeout handler. + */ + blk_add_timer(rq); } EXPORT_SYMBOL(elv_dequeue_request); -- cgit v1.2.3 From e78042e5b83936b1d12a4b5bbb492bdd88ad76c6 Mon Sep 17 00:00:00 2001 From: Mike Anderson Date: Thu, 30 Oct 2008 02:16:20 -0700 Subject: blk: move blk_delete_timer call in end_that_request_last Move the calling blk_delete_timer to later in end_that_request_last to address an issue where blkdev_dequeue_request may have add a timer for the request. Signed-off-by: Mike Anderson Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index c3df30cfb3fc..10e8a64a5a5b 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1770,8 +1770,6 @@ static void end_that_request_last(struct request *req, int error) { struct gendisk *disk = req->rq_disk; - blk_delete_timer(req); - if (blk_rq_tagged(req)) blk_queue_end_tag(req->q, req); @@ -1781,6 +1779,8 @@ static void end_that_request_last(struct request *req, int error) if (unlikely(laptop_mode) && blk_fs_request(req)) laptop_io_completion(); + blk_delete_timer(req); + /* * Account IO completion. bar_rq isn't accounted as a normal * IO on queueing nor completion. Accounting the containing -- cgit v1.2.3 From 561920a0d2bb6d63343e83acfd784c0a77bd28d1 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 30 Oct 2008 18:28:41 +0100 Subject: generic-ipi: fix the smp_mb() placement smp_mb() is needed (to make the memory operations visible globally) before sending the ipi on the sender and the receiver (on Alpha atleast) needs smp_read_barrier_depends() in the handler before reading the call_single_queue list in a lock-free fashion. On x86, x2apic mode register accesses for sending IPI's don't have serializing semantics. So the need for smp_mb() before sending the IPI becomes more critical in x2apic mode. Remove the unnecessary smp_mb() in csd_flag_wait(), as the presence of that smp_mb() doesn't mean anything on the sender, when the ipi receiver is not doing any thing special (like memory fence) after clearing the CSD_FLAG_WAIT. Signed-off-by: Suresh Siddha Signed-off-by: Jens Axboe --- kernel/smp.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/kernel/smp.c b/kernel/smp.c index f362a8553777..75c8dde58c55 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -51,10 +51,6 @@ static void csd_flag_wait(struct call_single_data *data) { /* Wait for response */ do { - /* - * We need to see the flags store in the IPI handler - */ - smp_mb(); if (!(data->flags & CSD_FLAG_WAIT)) break; cpu_relax(); @@ -76,6 +72,11 @@ static void generic_exec_single(int cpu, struct call_single_data *data) list_add_tail(&data->list, &dst->list); spin_unlock_irqrestore(&dst->lock, flags); + /* + * Make the list addition visible before sending the ipi. + */ + smp_mb(); + if (ipi) arch_send_call_function_single_ipi(cpu); @@ -157,7 +158,7 @@ void generic_smp_call_function_single_interrupt(void) * Need to see other stores to list head for checking whether * list is empty without holding q->lock */ - smp_mb(); + smp_read_barrier_depends(); while (!list_empty(&q->list)) { unsigned int data_flags; @@ -191,7 +192,7 @@ void generic_smp_call_function_single_interrupt(void) /* * See comment on outer loop */ - smp_mb(); + smp_read_barrier_depends(); } } @@ -370,6 +371,11 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info, list_add_tail_rcu(&data->csd.list, &call_function_queue); spin_unlock_irqrestore(&call_function_lock, flags); + /* + * Make the list addition visible before sending the ipi. + */ + smp_mb(); + /* Send a message to all CPUs in the map */ arch_send_call_function_ipi(mask); -- cgit v1.2.3 From 89f97496e81d2112b5e41416fe3020688c443818 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Nov 2008 10:21:06 +0100 Subject: block: fix __blkdev_get() for removable devices Commit 0762b8bde9729f10f8e6249809660ff2ec3ad735 moved disk_get_part() in front of recursive get on the whole disk, which caused removable devices to try disk_get_part() before rescanning after a new media is inserted, which might fail legit open attempts or give the old partition. This patch fixes the problem by moving disk_get_part() after __blkdev_get() on the whole disk. This problem was spotted by Borislav Petkov. Signed-off-by: Tejun Heo Tested-by: Borislav Petkov Signed-off-by: Jens Axboe --- fs/block_dev.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index 88a776fa0ef6..db831efbdbbd 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -986,7 +986,6 @@ static int __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part); static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part) { struct gendisk *disk; - struct hd_struct *part = NULL; int ret; int partno; int perm = 0; @@ -1004,24 +1003,25 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part) return ret; } - ret = -ENXIO; - lock_kernel(); + ret = -ENXIO; disk = get_gendisk(bdev->bd_dev, &partno); if (!disk) goto out_unlock_kernel; - part = disk_get_part(disk, partno); - if (!part) - goto out_unlock_kernel; mutex_lock_nested(&bdev->bd_mutex, for_part); if (!bdev->bd_openers) { bdev->bd_disk = disk; - bdev->bd_part = part; bdev->bd_contains = bdev; if (!partno) { struct backing_dev_info *bdi; + + ret = -ENXIO; + bdev->bd_part = disk_get_part(disk, partno); + if (!bdev->bd_part) + goto out_clear; + if (disk->fops->open) { ret = disk->fops->open(bdev, mode); if (ret) @@ -1049,18 +1049,17 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part) bdev->bd_contains = whole; bdev->bd_inode->i_data.backing_dev_info = whole->bd_inode->i_data.backing_dev_info; + bdev->bd_part = disk_get_part(disk, partno); if (!(disk->flags & GENHD_FL_UP) || - !part || !part->nr_sects) { + !bdev->bd_part || !bdev->bd_part->nr_sects) { ret = -ENXIO; goto out_clear; } - bd_set_size(bdev, (loff_t)part->nr_sects << 9); + bd_set_size(bdev, (loff_t)bdev->bd_part->nr_sects << 9); } } else { - disk_put_part(part); put_disk(disk); module_put(disk->fops->owner); - part = NULL; disk = NULL; if (bdev->bd_contains == bdev) { if (bdev->bd_disk->fops->open) { @@ -1080,6 +1079,7 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part) return 0; out_clear: + disk_put_part(bdev->bd_part); bdev->bd_disk = NULL; bdev->bd_part = NULL; bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info; @@ -1091,7 +1091,6 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part) out_unlock_kernel: unlock_kernel(); - disk_put_part(part); if (disk) module_put(disk->fops->owner); put_disk(disk); -- cgit v1.2.3 From 9c133c469d38043d5aadaa03f2fb840d88d1cf4f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 6 Nov 2008 08:42:48 +0100 Subject: Add round_jiffies_up and related routines This patch (as1158b) adds round_jiffies_up() and friends. These routines work like the analogous round_jiffies() functions, except that they will never round down. The new routines will be useful for timeouts where we don't care exactly when the timer expires, provided it doesn't expire too soon. Signed-off-by: Alan Stern Signed-off-by: Jens Axboe --- include/linux/timer.h | 5 ++ kernel/timer.c | 129 ++++++++++++++++++++++++++++++++++++++------------ 2 files changed, 104 insertions(+), 30 deletions(-) diff --git a/include/linux/timer.h b/include/linux/timer.h index d4ba79248a27..daf9685b861c 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -186,4 +186,9 @@ unsigned long __round_jiffies_relative(unsigned long j, int cpu); unsigned long round_jiffies(unsigned long j); unsigned long round_jiffies_relative(unsigned long j); +unsigned long __round_jiffies_up(unsigned long j, int cpu); +unsigned long __round_jiffies_up_relative(unsigned long j, int cpu); +unsigned long round_jiffies_up(unsigned long j); +unsigned long round_jiffies_up_relative(unsigned long j); + #endif diff --git a/kernel/timer.c b/kernel/timer.c index 56becf373c58..dbd50fabe4c7 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -112,27 +112,8 @@ timer_set_base(struct timer_list *timer, struct tvec_base *new_base) tbase_get_deferrable(timer->base)); } -/** - * __round_jiffies - function to round jiffies to a full second - * @j: the time in (absolute) jiffies that should be rounded - * @cpu: the processor number on which the timeout will happen - * - * __round_jiffies() rounds an absolute time in the future (in jiffies) - * up or down to (approximately) full seconds. This is useful for timers - * for which the exact time they fire does not matter too much, as long as - * they fire approximately every X seconds. - * - * By rounding these timers to whole seconds, all such timers will fire - * at the same time, rather than at various times spread out. The goal - * of this is to have the CPU wake up less, which saves power. - * - * The exact rounding is skewed for each processor to avoid all - * processors firing at the exact same time, which could lead - * to lock contention or spurious cache line bouncing. - * - * The return value is the rounded version of the @j parameter. - */ -unsigned long __round_jiffies(unsigned long j, int cpu) +static unsigned long round_jiffies_common(unsigned long j, int cpu, + bool force_up) { int rem; unsigned long original = j; @@ -154,8 +135,9 @@ unsigned long __round_jiffies(unsigned long j, int cpu) * due to delays of the timer irq, long irq off times etc etc) then * we should round down to the whole second, not up. Use 1/4th second * as cutoff for this rounding as an extreme upper bound for this. + * But never round down if @force_up is set. */ - if (rem < HZ/4) /* round down */ + if (rem < HZ/4 && !force_up) /* round down */ j = j - rem; else /* round up */ j = j - rem + HZ; @@ -167,6 +149,31 @@ unsigned long __round_jiffies(unsigned long j, int cpu) return original; return j; } + +/** + * __round_jiffies - function to round jiffies to a full second + * @j: the time in (absolute) jiffies that should be rounded + * @cpu: the processor number on which the timeout will happen + * + * __round_jiffies() rounds an absolute time in the future (in jiffies) + * up or down to (approximately) full seconds. This is useful for timers + * for which the exact time they fire does not matter too much, as long as + * they fire approximately every X seconds. + * + * By rounding these timers to whole seconds, all such timers will fire + * at the same time, rather than at various times spread out. The goal + * of this is to have the CPU wake up less, which saves power. + * + * The exact rounding is skewed for each processor to avoid all + * processors firing at the exact same time, which could lead + * to lock contention or spurious cache line bouncing. + * + * The return value is the rounded version of the @j parameter. + */ +unsigned long __round_jiffies(unsigned long j, int cpu) +{ + return round_jiffies_common(j, cpu, false); +} EXPORT_SYMBOL_GPL(__round_jiffies); /** @@ -191,13 +198,10 @@ EXPORT_SYMBOL_GPL(__round_jiffies); */ unsigned long __round_jiffies_relative(unsigned long j, int cpu) { - /* - * In theory the following code can skip a jiffy in case jiffies - * increments right between the addition and the later subtraction. - * However since the entire point of this function is to use approximate - * timeouts, it's entirely ok to not handle that. - */ - return __round_jiffies(j + jiffies, cpu) - jiffies; + unsigned long j0 = jiffies; + + /* Use j0 because jiffies might change while we run */ + return round_jiffies_common(j + j0, cpu, false) - j0; } EXPORT_SYMBOL_GPL(__round_jiffies_relative); @@ -218,7 +222,7 @@ EXPORT_SYMBOL_GPL(__round_jiffies_relative); */ unsigned long round_jiffies(unsigned long j) { - return __round_jiffies(j, raw_smp_processor_id()); + return round_jiffies_common(j, raw_smp_processor_id(), false); } EXPORT_SYMBOL_GPL(round_jiffies); @@ -243,6 +247,71 @@ unsigned long round_jiffies_relative(unsigned long j) } EXPORT_SYMBOL_GPL(round_jiffies_relative); +/** + * __round_jiffies_up - function to round jiffies up to a full second + * @j: the time in (absolute) jiffies that should be rounded + * @cpu: the processor number on which the timeout will happen + * + * This is the same as __round_jiffies() except that it will never + * round down. This is useful for timeouts for which the exact time + * of firing does not matter too much, as long as they don't fire too + * early. + */ +unsigned long __round_jiffies_up(unsigned long j, int cpu) +{ + return round_jiffies_common(j, cpu, true); +} +EXPORT_SYMBOL_GPL(__round_jiffies_up); + +/** + * __round_jiffies_up_relative - function to round jiffies up to a full second + * @j: the time in (relative) jiffies that should be rounded + * @cpu: the processor number on which the timeout will happen + * + * This is the same as __round_jiffies_relative() except that it will never + * round down. This is useful for timeouts for which the exact time + * of firing does not matter too much, as long as they don't fire too + * early. + */ +unsigned long __round_jiffies_up_relative(unsigned long j, int cpu) +{ + unsigned long j0 = jiffies; + + /* Use j0 because jiffies might change while we run */ + return round_jiffies_common(j + j0, cpu, true) - j0; +} +EXPORT_SYMBOL_GPL(__round_jiffies_up_relative); + +/** + * round_jiffies_up - function to round jiffies up to a full second + * @j: the time in (absolute) jiffies that should be rounded + * + * This is the same as round_jiffies() except that it will never + * round down. This is useful for timeouts for which the exact time + * of firing does not matter too much, as long as they don't fire too + * early. + */ +unsigned long round_jiffies_up(unsigned long j) +{ + return round_jiffies_common(j, raw_smp_processor_id(), true); +} +EXPORT_SYMBOL_GPL(round_jiffies_up); + +/** + * round_jiffies_up_relative - function to round jiffies up to a full second + * @j: the time in (relative) jiffies that should be rounded + * + * This is the same as round_jiffies_relative() except that it will never + * round down. This is useful for timeouts for which the exact time + * of firing does not matter too much, as long as they don't fire too + * early. + */ +unsigned long round_jiffies_up_relative(unsigned long j) +{ + return __round_jiffies_up_relative(j, raw_smp_processor_id()); +} +EXPORT_SYMBOL_GPL(round_jiffies_up_relative); + static inline void set_running_timer(struct tvec_base *base, struct timer_list *timer) -- cgit v1.2.3 From 7838c15b8dd18e78a523513749e5b54bda07b0cb Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 6 Nov 2008 08:42:49 +0100 Subject: Block: use round_jiffies_up() This patch (as1159b) changes the timeout routines in the block core to use round_jiffies_up(). There's no point in rounding the timer deadline down, since if it expires too early we will have to restart it. The patch also removes some unnecessary tests when a request is removed from the queue's timer list. Signed-off-by: Alan Stern Signed-off-by: Jens Axboe --- block/blk-timeout.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) diff --git a/block/blk-timeout.c b/block/blk-timeout.c index 972a63f848fb..69185ea9fae2 100644 --- a/block/blk-timeout.c +++ b/block/blk-timeout.c @@ -75,14 +75,7 @@ void blk_delete_timer(struct request *req) { struct request_queue *q = req->q; - /* - * Nothing to detach - */ - if (!q->rq_timed_out_fn || !req->deadline) - return; - list_del_init(&req->timeout_list); - if (list_empty(&q->timeout_list)) del_timer(&q->timeout); } @@ -142,7 +135,7 @@ void blk_rq_timed_out_timer(unsigned long data) } if (next_set && !list_empty(&q->timeout_list)) - mod_timer(&q->timeout, round_jiffies(next)); + mod_timer(&q->timeout, round_jiffies_up(next)); spin_unlock_irqrestore(q->queue_lock, flags); } @@ -198,17 +191,10 @@ void blk_add_timer(struct request *req) /* * If the timer isn't already pending or this timeout is earlier - * than an existing one, modify the timer. Round to next nearest + * than an existing one, modify the timer. Round up to next nearest * second. */ - expiry = round_jiffies(req->deadline); - - /* - * We use ->deadline == 0 to detect whether a timer was added or - * not, so just increase to next jiffy for that specific case - */ - if (unlikely(!req->deadline)) - req->deadline = 1; + expiry = round_jiffies_up(req->deadline); if (!timer_pending(&q->timeout) || time_before(expiry, q->timeout.expires)) -- cgit v1.2.3 From 2d3854a37e8b767a51aba38ed6d22817b0631e33 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 5 Nov 2008 13:39:10 +1100 Subject: cpumask: introduce new API, without changing anything Impact: introduce new APIs We want to deprecate cpumasks on the stack, as we are headed for gynormous numbers of CPUs. Eventually, we want to head towards an undefined 'struct cpumask' so they can never be declared on stack. 1) New cpumask functions which take pointers instead of copies. (cpus_* -> cpumask_*) 2) Several new helpers to reduce requirements for temporary cpumasks (cpumask_first_and, cpumask_next_and, cpumask_any_and) 3) Helpers for declaring cpumasks on or offstack for large NR_CPUS (cpumask_var_t, alloc_cpumask_var and free_cpumask_var) 4) 'struct cpumask' for explicitness and to mark new-style code. 5) Make iterator functions stop at nr_cpu_ids (a runtime constant), not NR_CPUS for time efficiency and for smaller dynamic allocations in future. 6) cpumask_copy() so we can allocate less than a full cpumask eventually (for alloc_cpumask_var), and so we can eliminate the 'struct cpumask' definition eventually. 7) work_on_cpu() helper for doing task on a CPU, rather than saving old cpumask for current thread and manipulating it. 8) smp_call_function_many() which is smp_call_function_mask() except taking a cpumask pointer. Note that this patch simply introduces the new functions and leaves the obsolescent ones in place. This is to simplify the transition patches. Signed-off-by: Rusty Russell Signed-off-by: Ingo Molnar --- include/linux/cpumask.h | 502 +++++++++++++++++++++++++++++++++++++++++++++- include/linux/smp.h | 9 + include/linux/workqueue.h | 8 + kernel/cpu.c | 3 + kernel/workqueue.c | 45 +++++ lib/cpumask.c | 73 +++++++ 6 files changed, 638 insertions(+), 2 deletions(-) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index d3219d73f8e6..c8e66619097b 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -5,6 +5,9 @@ * Cpumasks provide a bitmap suitable for representing the * set of CPU's in a system, one bit position per CPU number. * + * The new cpumask_ ops take a "struct cpumask *"; the old ones + * use cpumask_t. + * * See detailed comments in the file linux/bitmap.h describing the * data type on which these cpumasks are based. * @@ -31,7 +34,7 @@ * will span the entire range of NR_CPUS. * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * - * The available cpumask operations are: + * The obsolescent cpumask operations are: * * void cpu_set(cpu, mask) turn on bit 'cpu' in mask * void cpu_clear(cpu, mask) turn off bit 'cpu' in mask @@ -138,7 +141,7 @@ #include #include -typedef struct { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t; +typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t; extern cpumask_t _unused_cpumask_arg_; #define cpu_set(cpu, dst) __cpu_set((cpu), &(dst)) @@ -527,4 +530,499 @@ extern cpumask_t cpu_active_map; #define for_each_online_cpu(cpu) for_each_cpu_mask_nr((cpu), cpu_online_map) #define for_each_present_cpu(cpu) for_each_cpu_mask_nr((cpu), cpu_present_map) +/* These are the new versions of the cpumask operators: passed by pointer. + * The older versions will be implemented in terms of these, then deleted. */ +#define cpumask_bits(maskp) ((maskp)->bits) + +#if NR_CPUS <= BITS_PER_LONG +#define CPU_BITS_ALL \ +{ \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} + +/* This produces more efficient code. */ +#define nr_cpumask_bits NR_CPUS + +#else /* NR_CPUS > BITS_PER_LONG */ + +#define CPU_BITS_ALL \ +{ \ + [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} + +#define nr_cpumask_bits nr_cpu_ids +#endif /* NR_CPUS > BITS_PER_LONG */ + +/* verify cpu argument to cpumask_* operators */ +static inline unsigned int cpumask_check(unsigned int cpu) +{ +#ifdef CONFIG_DEBUG_PER_CPU_MAPS + WARN_ON_ONCE(cpu >= nr_cpumask_bits); +#endif /* CONFIG_DEBUG_PER_CPU_MAPS */ + return cpu; +} + +#if NR_CPUS == 1 +/* Uniprocesor. */ +#define cpumask_first(src) ({ (void)(src); 0; }) +#define cpumask_next(n, src) ({ (void)(src); 1; }) +#define cpumask_next_zero(n, src) ({ (void)(src); 1; }) +#define cpumask_next_and(n, srcp, andp) ({ (void)(srcp), (void)(andp); 1; }) +#define cpumask_any_but(mask, cpu) ({ (void)(mask); (void)(cpu); 0; }) + +#define for_each_cpu(cpu, mask) \ + for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) +#define for_each_cpu_and(cpu, mask, and) \ + for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask, (void)and) +#else +/** + * cpumask_first - get the first cpu in a cpumask + * @srcp: the cpumask pointer + * + * Returns >= nr_cpu_ids if no cpus set. + */ +static inline unsigned int cpumask_first(const struct cpumask *srcp) +{ + return find_first_bit(cpumask_bits(srcp), nr_cpumask_bits); +} + +/** + * cpumask_next - get the next cpu in a cpumask + * @n: the cpu prior to the place to search (ie. return will be > @n) + * @srcp: the cpumask pointer + * + * Returns >= nr_cpu_ids if no further cpus set. + */ +static inline unsigned int cpumask_next(int n, const struct cpumask *srcp) +{ + /* -1 is a legal arg here. */ + if (n != -1) + cpumask_check(n); + return find_next_bit(cpumask_bits(srcp), nr_cpumask_bits, n+1); +} + +/** + * cpumask_next_zero - get the next unset cpu in a cpumask + * @n: the cpu prior to the place to search (ie. return will be > @n) + * @srcp: the cpumask pointer + * + * Returns >= nr_cpu_ids if no further cpus unset. + */ +static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp) +{ + /* -1 is a legal arg here. */ + if (n != -1) + cpumask_check(n); + return find_next_zero_bit(cpumask_bits(srcp), nr_cpumask_bits, n+1); +} + +int cpumask_next_and(int n, const struct cpumask *, const struct cpumask *); +int cpumask_any_but(const struct cpumask *mask, unsigned int cpu); + +#define for_each_cpu(cpu, mask) \ + for ((cpu) = -1; \ + (cpu) = cpumask_next((cpu), (mask)), \ + (cpu) < nr_cpu_ids;) +#define for_each_cpu_and(cpu, mask, and) \ + for ((cpu) = -1; \ + (cpu) = cpumask_next_and((cpu), (mask), (and)), \ + (cpu) < nr_cpu_ids;) +#endif /* SMP */ + +#define CPU_BITS_NONE \ +{ \ + [0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \ +} + +#define CPU_BITS_CPU0 \ +{ \ + [0] = 1UL \ +} + +/** + * cpumask_set_cpu - set a cpu in a cpumask + * @cpu: cpu number (< nr_cpu_ids) + * @dstp: the cpumask pointer + */ +static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) +{ + set_bit(cpumask_check(cpu), cpumask_bits(dstp)); +} + +/** + * cpumask_clear_cpu - clear a cpu in a cpumask + * @cpu: cpu number (< nr_cpu_ids) + * @dstp: the cpumask pointer + */ +static inline void cpumask_clear_cpu(int cpu, struct cpumask *dstp) +{ + clear_bit(cpumask_check(cpu), cpumask_bits(dstp)); +} + +/** + * cpumask_test_cpu - test for a cpu in a cpumask + * @cpu: cpu number (< nr_cpu_ids) + * @cpumask: the cpumask pointer + * + * No static inline type checking - see Subtlety (1) above. + */ +#define cpumask_test_cpu(cpu, cpumask) \ + test_bit(cpumask_check(cpu), (cpumask)->bits) + +/** + * cpumask_test_and_set_cpu - atomically test and set a cpu in a cpumask + * @cpu: cpu number (< nr_cpu_ids) + * @cpumask: the cpumask pointer + * + * test_and_set_bit wrapper for cpumasks. + */ +static inline int cpumask_test_and_set_cpu(int cpu, struct cpumask *cpumask) +{ + return test_and_set_bit(cpumask_check(cpu), cpumask_bits(cpumask)); +} + +/** + * cpumask_setall - set all cpus (< nr_cpu_ids) in a cpumask + * @dstp: the cpumask pointer + */ +static inline void cpumask_setall(struct cpumask *dstp) +{ + bitmap_fill(cpumask_bits(dstp), nr_cpumask_bits); +} + +/** + * cpumask_clear - clear all cpus (< nr_cpu_ids) in a cpumask + * @dstp: the cpumask pointer + */ +static inline void cpumask_clear(struct cpumask *dstp) +{ + bitmap_zero(cpumask_bits(dstp), nr_cpumask_bits); +} + +/** + * cpumask_and - *dstp = *src1p & *src2p + * @dstp: the cpumask result + * @src1p: the first input + * @src2p: the second input + */ +static inline void cpumask_and(struct cpumask *dstp, + const struct cpumask *src1p, + const struct cpumask *src2p) +{ + bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p), + cpumask_bits(src2p), nr_cpumask_bits); +} + +/** + * cpumask_or - *dstp = *src1p | *src2p + * @dstp: the cpumask result + * @src1p: the first input + * @src2p: the second input + */ +static inline void cpumask_or(struct cpumask *dstp, const struct cpumask *src1p, + const struct cpumask *src2p) +{ + bitmap_or(cpumask_bits(dstp), cpumask_bits(src1p), + cpumask_bits(src2p), nr_cpumask_bits); +} + +/** + * cpumask_xor - *dstp = *src1p ^ *src2p + * @dstp: the cpumask result + * @src1p: the first input + * @src2p: the second input + */ +static inline void cpumask_xor(struct cpumask *dstp, + const struct cpumask *src1p, + const struct cpumask *src2p) +{ + bitmap_xor(cpumask_bits(dstp), cpumask_bits(src1p), + cpumask_bits(src2p), nr_cpumask_bits); +} + +/** + * cpumask_andnot - *dstp = *src1p & ~*src2p + * @dstp: the cpumask result + * @src1p: the first input + * @src2p: the second input + */ +static inline void cpumask_andnot(struct cpumask *dstp, + const struct cpumask *src1p, + const struct cpumask *src2p) +{ + bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p), + cpumask_bits(src2p), nr_cpumask_bits); +} + +/** + * cpumask_complement - *dstp = ~*srcp + * @dstp: the cpumask result + * @srcp: the input to invert + */ +static inline void cpumask_complement(struct cpumask *dstp, + const struct cpumask *srcp) +{ + bitmap_complement(cpumask_bits(dstp), cpumask_bits(srcp), + nr_cpumask_bits); +} + +/** + * cpumask_equal - *src1p == *src2p + * @src1p: the first input + * @src2p: the second input + */ +static inline bool cpumask_equal(const struct cpumask *src1p, + const struct cpumask *src2p) +{ + return bitmap_equal(cpumask_bits(src1p), cpumask_bits(src2p), + nr_cpumask_bits); +} + +/** + * cpumask_intersects - (*src1p & *src2p) != 0 + * @src1p: the first input + * @src2p: the second input + */ +static inline bool cpumask_intersects(const struct cpumask *src1p, + const struct cpumask *src2p) +{ + return bitmap_intersects(cpumask_bits(src1p), cpumask_bits(src2p), + nr_cpumask_bits); +} + +/** + * cpumask_subset - (*src1p & ~*src2p) == 0 + * @src1p: the first input + * @src2p: the second input + */ +static inline int cpumask_subset(const struct cpumask *src1p, + const struct cpumask *src2p) +{ + return bitmap_subset(cpumask_bits(src1p), cpumask_bits(src2p), + nr_cpumask_bits); +} + +/** + * cpumask_empty - *srcp == 0 + * @srcp: the cpumask to that all cpus < nr_cpu_ids are clear. + */ +static inline bool cpumask_empty(const struct cpumask *srcp) +{ + return bitmap_empty(cpumask_bits(srcp), nr_cpumask_bits); +} + +/** + * cpumask_full - *srcp == 0xFFFFFFFF... + * @srcp: the cpumask to that all cpus < nr_cpu_ids are set. + */ +static inline bool cpumask_full(const struct cpumask *srcp) +{ + return bitmap_full(cpumask_bits(srcp), nr_cpumask_bits); +} + +/** + * cpumask_weight - Count of bits in *srcp + * @srcp: the cpumask to count bits (< nr_cpu_ids) in. + */ +static inline unsigned int cpumask_weight(const struct cpumask *srcp) +{ + return bitmap_weight(cpumask_bits(srcp), nr_cpumask_bits); +} + +/** + * cpumask_shift_right - *dstp = *srcp >> n + * @dstp: the cpumask result + * @srcp: the input to shift + * @n: the number of bits to shift by + */ +static inline void cpumask_shift_right(struct cpumask *dstp, + const struct cpumask *srcp, int n) +{ + bitmap_shift_right(cpumask_bits(dstp), cpumask_bits(srcp), n, + nr_cpumask_bits); +} + +/** + * cpumask_shift_left - *dstp = *srcp << n + * @dstp: the cpumask result + * @srcp: the input to shift + * @n: the number of bits to shift by + */ +static inline void cpumask_shift_left(struct cpumask *dstp, + const struct cpumask *srcp, int n) +{ + bitmap_shift_left(cpumask_bits(dstp), cpumask_bits(srcp), n, + nr_cpumask_bits); +} + +/** + * cpumask_copy - *dstp = *srcp + * @dstp: the result + * @srcp: the input cpumask + */ +static inline void cpumask_copy(struct cpumask *dstp, + const struct cpumask *srcp) +{ + bitmap_copy(cpumask_bits(dstp), cpumask_bits(srcp), nr_cpumask_bits); +} + +/** + * cpumask_any - pick a "random" cpu from *srcp + * @srcp: the input cpumask + * + * Returns >= nr_cpu_ids if no cpus set. + */ +#define cpumask_any(srcp) cpumask_first(srcp) + +/** + * cpumask_first_and - return the first cpu from *srcp1 & *srcp2 + * @src1p: the first input + * @src2p: the second input + * + * Returns >= nr_cpu_ids if no cpus set in both. See also cpumask_next_and(). + */ +#define cpumask_first_and(src1p, src2p) cpumask_next_and(-1, (src1p), (src2p)) + +/** + * cpumask_any_and - pick a "random" cpu from *mask1 & *mask2 + * @mask1: the first input cpumask + * @mask2: the second input cpumask + * + * Returns >= nr_cpu_ids if no cpus set. + */ +#define cpumask_any_and(mask1, mask2) cpumask_first_and((mask1), (mask2)) + +/** + * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask * + * @bitmap: the bitmap + * + * There are a few places where cpumask_var_t isn't appropriate and + * static cpumasks must be used (eg. very early boot), yet we don't + * expose the definition of 'struct cpumask'. + * + * This does the conversion, and can be used as a constant initializer. + */ +#define to_cpumask(bitmap) \ + ((struct cpumask *)(1 ? (bitmap) \ + : (void *)sizeof(__check_is_bitmap(bitmap)))) + +static inline int __check_is_bitmap(const unsigned long *bitmap) +{ + return 1; +} + +/** + * cpumask_size - size to allocate for a 'struct cpumask' in bytes + * + * This will eventually be a runtime variable, depending on nr_cpu_ids. + */ +static inline size_t cpumask_size(void) +{ + /* FIXME: Once all cpumask assignments are eliminated, this + * can be nr_cpumask_bits */ + return BITS_TO_LONGS(NR_CPUS) * sizeof(long); +} + +/* + * cpumask_var_t: struct cpumask for stack usage. + * + * Oh, the wicked games we play! In order to make kernel coding a + * little more difficult, we typedef cpumask_var_t to an array or a + * pointer: doing &mask on an array is a noop, so it still works. + * + * ie. + * cpumask_var_t tmpmask; + * if (!alloc_cpumask_var(&tmpmask, GFP_KERNEL)) + * return -ENOMEM; + * + * ... use 'tmpmask' like a normal struct cpumask * ... + * + * free_cpumask_var(tmpmask); + */ +#ifdef CONFIG_CPUMASK_OFFSTACK +typedef struct cpumask *cpumask_var_t; + +bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags); +void alloc_bootmem_cpumask_var(cpumask_var_t *mask); +void free_cpumask_var(cpumask_var_t mask); + +#else +typedef struct cpumask cpumask_var_t[1]; + +static inline bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags) +{ + return true; +} + +static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask) +{ +} + +static inline void free_cpumask_var(cpumask_var_t mask) +{ +} +#endif /* CONFIG_CPUMASK_OFFSTACK */ + +/* The pointer versions of the maps, these will become the primary versions. */ +#define cpu_possible_mask ((const struct cpumask *)&cpu_possible_map) +#define cpu_online_mask ((const struct cpumask *)&cpu_online_map) +#define cpu_present_mask ((const struct cpumask *)&cpu_present_map) +#define cpu_active_mask ((const struct cpumask *)&cpu_active_map) + +/* It's common to want to use cpu_all_mask in struct member initializers, + * so it has to refer to an address rather than a pointer. */ +extern const DECLARE_BITMAP(cpu_all_bits, NR_CPUS); +#define cpu_all_mask to_cpumask(cpu_all_bits) + +/* First bits of cpu_bit_bitmap are in fact unset. */ +#define cpu_none_mask to_cpumask(cpu_bit_bitmap[0]) + +/* Wrappers for arch boot code to manipulate normally-constant masks */ +static inline void set_cpu_possible(unsigned int cpu, bool possible) +{ + if (possible) + cpumask_set_cpu(cpu, &cpu_possible_map); + else + cpumask_clear_cpu(cpu, &cpu_possible_map); +} + +static inline void set_cpu_present(unsigned int cpu, bool present) +{ + if (present) + cpumask_set_cpu(cpu, &cpu_present_map); + else + cpumask_clear_cpu(cpu, &cpu_present_map); +} + +static inline void set_cpu_online(unsigned int cpu, bool online) +{ + if (online) + cpumask_set_cpu(cpu, &cpu_online_map); + else + cpumask_clear_cpu(cpu, &cpu_online_map); +} + +static inline void set_cpu_active(unsigned int cpu, bool active) +{ + if (active) + cpumask_set_cpu(cpu, &cpu_active_map); + else + cpumask_clear_cpu(cpu, &cpu_active_map); +} + +static inline void init_cpu_present(const struct cpumask *src) +{ + cpumask_copy(&cpu_present_map, src); +} + +static inline void init_cpu_possible(const struct cpumask *src) +{ + cpumask_copy(&cpu_possible_map, src); +} + +static inline void init_cpu_online(const struct cpumask *src) +{ + cpumask_copy(&cpu_online_map, src); +} #endif /* __LINUX_CPUMASK_H */ diff --git a/include/linux/smp.h b/include/linux/smp.h index 2e4d58b26c06..3f9a60043a97 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -64,8 +64,17 @@ extern void smp_cpus_done(unsigned int max_cpus); * Call a function on all other processors */ int smp_call_function(void(*func)(void *info), void *info, int wait); +/* Deprecated: use smp_call_function_many() which uses a cpumask ptr. */ int smp_call_function_mask(cpumask_t mask, void(*func)(void *info), void *info, int wait); + +static inline void smp_call_function_many(const struct cpumask *mask, + void (*func)(void *info), void *info, + int wait) +{ + smp_call_function_mask(*mask, func, info, wait); +} + int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, int wait); void __smp_call_function_single(int cpuid, struct call_single_data *data); diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 89a5a1231ffb..b36291130f22 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -240,4 +240,12 @@ void cancel_rearming_delayed_work(struct delayed_work *work) cancel_delayed_work_sync(work); } +#ifndef CONFIG_SMP +static inline long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) +{ + return fn(arg); +} +#else +long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg); +#endif /* CONFIG_SMP */ #endif diff --git a/kernel/cpu.c b/kernel/cpu.c index 86d49045daed..5a732c5ef08b 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -499,3 +499,6 @@ const unsigned long cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)] = { #endif }; EXPORT_SYMBOL_GPL(cpu_bit_bitmap); + +const DECLARE_BITMAP(cpu_all_bits, NR_CPUS) = CPU_BITS_ALL; +EXPORT_SYMBOL(cpu_all_bits); diff --git a/kernel/workqueue.c b/kernel/workqueue.c index f928f2a87b9b..d4dc69ddebd7 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -970,6 +970,51 @@ undo: return ret; } +#ifdef CONFIG_SMP +struct work_for_cpu { + struct work_struct work; + long (*fn)(void *); + void *arg; + long ret; +}; + +static void do_work_for_cpu(struct work_struct *w) +{ + struct work_for_cpu *wfc = container_of(w, struct work_for_cpu, work); + + wfc->ret = wfc->fn(wfc->arg); +} + +/** + * work_on_cpu - run a function in user context on a particular cpu + * @cpu: the cpu to run on + * @fn: the function to run + * @arg: the function arg + * + * This will return -EINVAL in the cpu is not online, or the return value + * of @fn otherwise. + */ +long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) +{ + struct work_for_cpu wfc; + + INIT_WORK(&wfc.work, do_work_for_cpu); + wfc.fn = fn; + wfc.arg = arg; + get_online_cpus(); + if (unlikely(!cpu_online(cpu))) + wfc.ret = -EINVAL; + else { + schedule_work_on(cpu, &wfc.work); + flush_work(&wfc.work); + } + put_online_cpus(); + + return wfc.ret; +} +EXPORT_SYMBOL_GPL(work_on_cpu); +#endif /* CONFIG_SMP */ + void __init init_workqueues(void) { cpu_populated_map = cpu_online_map; diff --git a/lib/cpumask.c b/lib/cpumask.c index 5f97dc25ef9c..5ceb4211c834 100644 --- a/lib/cpumask.c +++ b/lib/cpumask.c @@ -2,6 +2,7 @@ #include #include #include +#include int __first_cpu(const cpumask_t *srcp) { @@ -35,3 +36,75 @@ int __any_online_cpu(const cpumask_t *mask) return cpu; } EXPORT_SYMBOL(__any_online_cpu); + +/** + * cpumask_next_and - get the next cpu in *src1p & *src2p + * @n: the cpu prior to the place to search (ie. return will be > @n) + * @src1p: the first cpumask pointer + * @src2p: the second cpumask pointer + * + * Returns >= nr_cpu_ids if no further cpus set in both. + */ +int cpumask_next_and(int n, const struct cpumask *src1p, + const struct cpumask *src2p) +{ + while ((n = cpumask_next(n, src1p)) < nr_cpu_ids) + if (cpumask_test_cpu(n, src2p)) + break; + return n; +} +EXPORT_SYMBOL(cpumask_next_and); + +/** + * cpumask_any_but - return a "random" in a cpumask, but not this one. + * @mask: the cpumask to search + * @cpu: the cpu to ignore. + * + * Often used to find any cpu but smp_processor_id() in a mask. + * Returns >= nr_cpu_ids if no cpus set. + */ +int cpumask_any_but(const struct cpumask *mask, unsigned int cpu) +{ + unsigned int i; + + for_each_cpu(i, mask) + if (i != cpu) + break; + return i; +} + +/* These are not inline because of header tangles. */ +#ifdef CONFIG_CPUMASK_OFFSTACK +bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags) +{ + if (likely(slab_is_available())) + *mask = kmalloc(cpumask_size(), flags); + else { +#ifdef CONFIG_DEBUG_PER_CPU_MAPS + printk(KERN_ERR + "=> alloc_cpumask_var: kmalloc not available!\n"); + dump_stack(); +#endif + *mask = NULL; + } +#ifdef CONFIG_DEBUG_PER_CPU_MAPS + if (!*mask) { + printk(KERN_ERR "=> alloc_cpumask_var: failed!\n"); + dump_stack(); + } +#endif + return *mask != NULL; +} +EXPORT_SYMBOL(alloc_cpumask_var); + +void __init alloc_bootmem_cpumask_var(cpumask_var_t *mask) +{ + *mask = alloc_bootmem(cpumask_size()); +} + +void free_cpumask_var(cpumask_var_t mask) +{ + kfree(mask); +} +EXPORT_SYMBOL(free_cpumask_var); +#endif -- cgit v1.2.3 From 7db282fa67b58daff8a57f9e1c93d4474b5908ff Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 5 Nov 2008 23:36:48 -0800 Subject: x86: remove VISWS and PARAVIRT around NR_IRQS puzzle Impact: fix warning message when PARAVIRT is set in config Remove stale #ifdef components from our IRQ sizing logic. x86/Voyager is the only holdout. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/include/asm/irq_vectors.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 503aadc4ad35..0005adb0f941 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -101,18 +101,18 @@ #define LAST_VM86_IRQ 15 #define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) -#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_PARAVIRT) && !defined(CONFIG_X86_VISWS) && !defined(CONFIG_X86_VOYAGER) +#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_VOYAGER) # if NR_CPUS < MAX_IO_APICS # define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) # else # define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) # endif -#elif defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS) || defined(CONFIG_X86_VOYAGER) +#elif defined(CONFIG_X86_VOYAGER) # define NR_IRQS 224 -#else /* IO_APIC || PARAVIRT */ +#else /* IO_APIC || VOYAGER */ # define NR_IRQS 16 -- cgit v1.2.3 From f1cd14ae52985634d0389e934eba25b5ecf24565 Mon Sep 17 00:00:00 2001 From: Andre Noll Date: Thu, 6 Nov 2008 19:41:24 +1100 Subject: md: linear: Fix a division by zero bug for very small arrays. We currently oops with a divide error on starting a linear software raid array consisting of at least two very small (< 500K) devices. The bug is caused by the calculation of the hash table size which tries to compute sector_div(sz, base) with "base" being zero due to the small size of the component devices of the array. Fix this by requiring the hash spacing to be at least one which implies that also "base" is non-zero. This bug has existed since about 2.6.14. Cc: stable@kernel.org Signed-off-by: Andre Noll Signed-off-by: NeilBrown --- drivers/md/linear.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 190147c79e79..3b90c5c924ec 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -148,6 +148,8 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) min_sectors = conf->array_sectors; sector_div(min_sectors, PAGE_SIZE/sizeof(struct dev_info *)); + if (min_sectors == 0) + min_sectors = 1; /* min_sectors is the minimum spacing that will fit the hash * table in one PAGE. This may be much smaller than needed. -- cgit v1.2.3 From d6f0f39b7d05e62b347c4352d070e4afb3ade4b5 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 4 Nov 2008 13:53:04 -0800 Subject: x86: add smp_mb() before sending INVALIDATE_TLB_VECTOR Impact: fix rare x2apic hang On x86, x2apic mode accesses for sending IPI's don't have serializing semantics. If the IPI receivner refers(in lock-free fashion) to some memory setup by the sender, the need for smp_mb() before sending the IPI becomes critical in x2apic mode. Add the smp_mb() in native_flush_tlb_others() before sending the IPI. Signed-off-by: Suresh Siddha Signed-off-by: Ingo Molnar --- arch/x86/kernel/tlb_32.c | 6 ++++++ arch/x86/kernel/tlb_64.c | 5 +++++ 2 files changed, 11 insertions(+) diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c index e00534b33534..f4049f3513b6 100644 --- a/arch/x86/kernel/tlb_32.c +++ b/arch/x86/kernel/tlb_32.c @@ -154,6 +154,12 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, flush_mm = mm; flush_va = va; cpus_or(flush_cpumask, cpumask, flush_cpumask); + + /* + * Make the above memory operations globally visible before + * sending the IPI. + */ + smp_mb(); /* * We have to send the IPI only to * CPUs affected. diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c index dcbf7a1159ea..8f919ca69494 100644 --- a/arch/x86/kernel/tlb_64.c +++ b/arch/x86/kernel/tlb_64.c @@ -182,6 +182,11 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, f->flush_va = va; cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask); + /* + * Make the above memory operations globally visible before + * sending the IPI. + */ + smp_mb(); /* * We have to send the IPI only to * CPUs affected. -- cgit v1.2.3 From b954f6f63e7938a11de5bd15cb5cbcac7423cf97 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 5 Nov 2008 22:18:41 +0200 Subject: [WATCHDOG] SAM9 watchdog - update for moved headers The architecture header files were recently moved from include/asm-arm/mach-at91/ to arch/arm/mach-at91/include/mach/. The SAM9 watchdog driver still includes a header from the old location. Signed-off-by: Andrew Victor Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/at91sam9_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index b4babfc31586..b1da287f90ec 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -30,7 +30,7 @@ #include #include -#include +#include #define DRV_NAME "AT91SAM9 Watchdog" -- cgit v1.2.3 From f0e625c1aa24e861c224fb778c377b2ddb443d2b Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 5 Nov 2008 22:36:35 +0200 Subject: [WATCHDOG] SAM9 watchdog - supported on all SAM9 and CAP9 processors The SAM9 watchdog driver is usable on the whole family of AT91SAM9 and CAP9 processors. Update the configuration to indicate this and allow the driver to be selected. Signed-off-by: Andrew Victor Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 1a22fe782a27..4fd3fa5546b1 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -67,11 +67,11 @@ config AT91RM9200_WATCHDOG system when the timeout is reached. config AT91SAM9X_WATCHDOG - tristate "AT91SAM9X watchdog" - depends on WATCHDOG && (ARCH_AT91SAM9260 || ARCH_AT91SAM9261) + tristate "AT91SAM9X / AT91CAP9 watchdog" + depends on ARCH_AT91 && !ARCH_AT91RM9200 help - Watchdog timer embedded into AT91SAM9X chips. This will reboot your - system when the timeout is reached. + Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will + reboot your system when the timeout is reached. config 21285_WATCHDOG tristate "DC21285 watchdog" -- cgit v1.2.3 From 069782a1ee55105220e5ae2db448495dac267cb1 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 21 Oct 2008 12:56:31 +0300 Subject: UBIFS: remove printk Remove the "UBIFS background thread ubifs_bgd0_0 started" message. We kill the background thread when we switch to R/O mode, and start it again whan we switch to R/W mode. OLPC is doing this many times during boot, and we see this message many times as well, which is irritating. So just kill the message. Signed-off-by: Artem Bityutskiy --- fs/ubifs/commit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ubifs/commit.c b/fs/ubifs/commit.c index 0a6aa2cc78f0..b49884c8c10e 100644 --- a/fs/ubifs/commit.c +++ b/fs/ubifs/commit.c @@ -234,8 +234,8 @@ int ubifs_bg_thread(void *info) int err; struct ubifs_info *c = info; - ubifs_msg("background thread \"%s\" started, PID %d", - c->bgt_name, current->pid); + dbg_msg("background thread \"%s\" started, PID %d", + c->bgt_name, current->pid); set_freezable(); while (1) { -- cgit v1.2.3 From 0ecb9529a4d47825778e7b0d226eb36019252a9d Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Fri, 24 Oct 2008 10:52:57 -0700 Subject: UBIFS: endian handling fixes and annotations Noticed by sparse: fs/ubifs/file.c:75:2: warning: restricted __le64 degrades to integer fs/ubifs/file.c:629:4: warning: restricted __le64 degrades to integer fs/ubifs/dir.c:431:3: warning: restricted __le64 degrades to integer This should be checked to ensure the ubifs_assert is working as intended, I've done the suggested annotation in this patch. fs/ubifs/sb.c:298:6: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:298:6: expected int [signed] [assigned] tmp fs/ubifs/sb.c:298:6: got restricted __le64 [usertype] fs/ubifs/sb.c:299:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:299:19: expected restricted __le64 [usertype] atime_sec fs/ubifs/sb.c:299:19: got int [signed] [assigned] tmp fs/ubifs/sb.c:300:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:300:19: expected restricted __le64 [usertype] ctime_sec fs/ubifs/sb.c:300:19: got int [signed] [assigned] tmp fs/ubifs/sb.c:301:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:301:19: expected restricted __le64 [usertype] mtime_sec fs/ubifs/sb.c:301:19: got int [signed] [assigned] tmp This looks like a bugfix as your tmp was a u32 so there was truncation in the atime, mtime, ctime value, probably not intentional, add a tmp_le64 and use it here. fs/ubifs/key.h:348:9: warning: cast to restricted __le32 fs/ubifs/key.h:348:9: warning: cast to restricted __le32 fs/ubifs/key.h:419:9: warning: cast to restricted __le32 Read from the annotated union member instead. fs/ubifs/recovery.c:175:13: warning: incorrect type in assignment (different base types) fs/ubifs/recovery.c:175:13: expected unsigned int [unsigned] [usertype] save_flags fs/ubifs/recovery.c:175:13: got restricted __le32 [usertype] flags fs/ubifs/recovery.c:186:13: warning: incorrect type in assignment (different base types) fs/ubifs/recovery.c:186:13: expected restricted __le32 [usertype] flags fs/ubifs/recovery.c:186:13: got unsigned int [unsigned] [usertype] save_flags Do byteshifting at compile time of the flag value. Annotate the saved_flags as le32. fs/ubifs/debug.c:368:10: warning: cast to restricted __le32 fs/ubifs/debug.c:368:10: warning: cast from restricted __le64 Should be checked if the truncation was intentional, I've changed the printk to print the full width. Signed-off-by: Harvey Harrison Signed-off-by: Artem Bityutskiy --- fs/ubifs/debug.c | 4 ++-- fs/ubifs/dir.c | 3 ++- fs/ubifs/file.c | 4 ++-- fs/ubifs/key.h | 4 ++-- fs/ubifs/recovery.c | 4 ++-- fs/ubifs/sb.c | 9 +++++---- 6 files changed, 15 insertions(+), 13 deletions(-) diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c index 7186400750e7..f9deccbc90c0 100644 --- a/fs/ubifs/debug.c +++ b/fs/ubifs/debug.c @@ -364,8 +364,8 @@ void dbg_dump_node(const struct ubifs_info *c, const void *node) le32_to_cpu(mst->ihead_lnum)); printk(KERN_DEBUG "\tihead_offs %u\n", le32_to_cpu(mst->ihead_offs)); - printk(KERN_DEBUG "\tindex_size %u\n", - le32_to_cpu(mst->index_size)); + printk(KERN_DEBUG "\tindex_size %llu\n", + (unsigned long long)le64_to_cpu(mst->index_size)); printk(KERN_DEBUG "\tlpt_lnum %u\n", le32_to_cpu(mst->lpt_lnum)); printk(KERN_DEBUG "\tlpt_offs %u\n", diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index 526c01ec8003..37a9e604c3e9 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -428,7 +428,8 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) dbg_gen("feed '%s', ino %llu, new f_pos %#x", dent->name, (unsigned long long)le64_to_cpu(dent->inum), key_hash_flash(c, &dent->key)); - ubifs_assert(dent->ch.sqnum > ubifs_inode(dir)->creat_sqnum); + ubifs_assert(le64_to_cpu(dent->ch.sqnum) > + ubifs_inode(dir)->creat_sqnum); nm.len = le16_to_cpu(dent->nlen); over = filldir(dirent, dent->name, nm.len, file->f_pos, diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index 51cf511d44d9..9124eee73aea 100644 --- a/fs/ubifs/file.c +++ b/fs/ubifs/file.c @@ -72,7 +72,7 @@ static int read_block(struct inode *inode, void *addr, unsigned int block, return err; } - ubifs_assert(dn->ch.sqnum > ubifs_inode(inode)->creat_sqnum); + ubifs_assert(le64_to_cpu(dn->ch.sqnum) > ubifs_inode(inode)->creat_sqnum); len = le32_to_cpu(dn->size); if (len <= 0 || len > UBIFS_BLOCK_SIZE) @@ -626,7 +626,7 @@ static int populate_page(struct ubifs_info *c, struct page *page, dn = bu->buf + (bu->zbranch[nn].offs - offs); - ubifs_assert(dn->ch.sqnum > + ubifs_assert(le64_to_cpu(dn->ch.sqnum) > ubifs_inode(inode)->creat_sqnum); len = le32_to_cpu(dn->size); diff --git a/fs/ubifs/key.h b/fs/ubifs/key.h index 9ee65086f627..3f1f16bc25c9 100644 --- a/fs/ubifs/key.h +++ b/fs/ubifs/key.h @@ -345,7 +345,7 @@ static inline int key_type_flash(const struct ubifs_info *c, const void *k) { const union ubifs_key *key = k; - return le32_to_cpu(key->u32[1]) >> UBIFS_S_KEY_BLOCK_BITS; + return le32_to_cpu(key->j32[1]) >> UBIFS_S_KEY_BLOCK_BITS; } /** @@ -416,7 +416,7 @@ static inline unsigned int key_block_flash(const struct ubifs_info *c, { const union ubifs_key *key = k; - return le32_to_cpu(key->u32[1]) & UBIFS_S_KEY_BLOCK_MASK; + return le32_to_cpu(key->j32[1]) & UBIFS_S_KEY_BLOCK_MASK; } /** diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c index 77d26c141cf6..bed97421b972 100644 --- a/fs/ubifs/recovery.c +++ b/fs/ubifs/recovery.c @@ -168,12 +168,12 @@ static int write_rcvrd_mst_node(struct ubifs_info *c, struct ubifs_mst_node *mst) { int err = 0, lnum = UBIFS_MST_LNUM, sz = c->mst_node_alsz; - uint32_t save_flags; + __le32 save_flags; dbg_rcvry("recovery"); save_flags = mst->flags; - mst->flags = cpu_to_le32(le32_to_cpu(mst->flags) | UBIFS_MST_RCVRY); + mst->flags |= cpu_to_le32(UBIFS_MST_RCVRY); ubifs_prepare_node(c, mst, UBIFS_MST_NODE_SZ, 1); err = ubi_leb_change(c->ubi, lnum, mst, sz, UBI_SHORTTERM); diff --git a/fs/ubifs/sb.c b/fs/ubifs/sb.c index 2bf753b38889..0f392351dc5a 100644 --- a/fs/ubifs/sb.c +++ b/fs/ubifs/sb.c @@ -81,6 +81,7 @@ static int create_default_filesystem(struct ubifs_info *c) int lpt_lebs, lpt_first, orph_lebs, big_lpt, ino_waste, sup_flags = 0; int min_leb_cnt = UBIFS_MIN_LEB_CNT; uint64_t tmp64, main_bytes; + __le64 tmp_le64; /* Some functions called from here depend on the @c->key_len filed */ c->key_len = UBIFS_SK_LEN; @@ -295,10 +296,10 @@ static int create_default_filesystem(struct ubifs_info *c) ino->ch.node_type = UBIFS_INO_NODE; ino->creat_sqnum = cpu_to_le64(++c->max_sqnum); ino->nlink = cpu_to_le32(2); - tmp = cpu_to_le64(CURRENT_TIME_SEC.tv_sec); - ino->atime_sec = tmp; - ino->ctime_sec = tmp; - ino->mtime_sec = tmp; + tmp_le64 = cpu_to_le64(CURRENT_TIME_SEC.tv_sec); + ino->atime_sec = tmp_le64; + ino->ctime_sec = tmp_le64; + ino->mtime_sec = tmp_le64; ino->atime_nsec = 0; ino->ctime_nsec = 0; ino->mtime_nsec = 0; -- cgit v1.2.3 From e2966cbe8901e3f1c120ef82d29c59db1b3bd882 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Sat, 25 Oct 2008 18:54:04 +0300 Subject: MAINTAINERS: change UBI/UBIFS git tree URLs Signed-off-by: Artem Bityutskiy --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index d643e862b8e4..7e897ee2de4d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4192,7 +4192,7 @@ M: dedekind@infradead.org P: Adrian Hunter M: ext-adrian.hunter@nokia.com L: linux-mtd@lists.infradead.org -T: git git://git.infradead.org/~dedekind/ubifs-2.6.git +T: git git://git.infradead.org/ubifs-2.6.git W: http://www.linux-mtd.infradead.org/doc/ubifs.html S: Maintained @@ -4246,7 +4246,7 @@ P: Artem Bityutskiy M: dedekind@infradead.org W: http://www.linux-mtd.infradead.org/ L: linux-mtd@lists.infradead.org -T: git git://git.infradead.org/~dedekind/ubi-2.6.git +T: git git://git.infradead.org/ubi-2.6.git S: Maintained USB ACM DRIVER -- cgit v1.2.3 From e84461ad9c4f0ff91ab8553596acdb7bf5522df4 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 29 Oct 2008 12:08:43 +0200 Subject: UBIFS: fix compilation warnings We print 'ino_t' type using '%lu' printk() placeholder, but this results in many warnings when compiling for Alpha platform. Fix this by adding (unsingned long) casts. Fixes these warnings: fs/ubifs/journal.c:693: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/journal.c:1131: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/dir.c:163: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/tnc.c:2680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/tnc.c:2700: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/replay.c:1066: warning: format '%lu' expects type 'long unsigned int', but argument 7 has type 'ino_t' fs/ubifs/orphan.c:108: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:135: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:142: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:154: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:159: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:451: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:539: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:612: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:843: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:856: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1438: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1443: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1475: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1495: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:1591: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1671: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1674: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1699: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1788: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1821: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1833: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1924: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1932: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1938: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1945: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1953: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1960: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1967: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1973: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1988: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1991: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:2009: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ino_t' Reported-by: Randy Dunlap Signed-off-by: Artem Bityutskiy --- fs/ubifs/debug.c | 62 ++++++++++++++++++++++++++++++++--------------------- fs/ubifs/dir.c | 2 +- fs/ubifs/journal.c | 8 ++++--- fs/ubifs/orphan.c | 28 +++++++++++++----------- fs/ubifs/recovery.c | 13 +++++------ fs/ubifs/replay.c | 2 +- fs/ubifs/tnc.c | 5 +++-- 7 files changed, 70 insertions(+), 50 deletions(-) diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c index f9deccbc90c0..510ffa0bbda4 100644 --- a/fs/ubifs/debug.c +++ b/fs/ubifs/debug.c @@ -101,21 +101,24 @@ static void sprintf_key(const struct ubifs_info *c, const union ubifs_key *key, if (c->key_fmt == UBIFS_SIMPLE_KEY_FMT) { switch (type) { case UBIFS_INO_KEY: - sprintf(p, "(%lu, %s)", key_inum(c, key), + sprintf(p, "(%lu, %s)", (unsigned long)key_inum(c, key), get_key_type(type)); break; case UBIFS_DENT_KEY: case UBIFS_XENT_KEY: - sprintf(p, "(%lu, %s, %#08x)", key_inum(c, key), + sprintf(p, "(%lu, %s, %#08x)", + (unsigned long)key_inum(c, key), get_key_type(type), key_hash(c, key)); break; case UBIFS_DATA_KEY: - sprintf(p, "(%lu, %s, %u)", key_inum(c, key), + sprintf(p, "(%lu, %s, %u)", + (unsigned long)key_inum(c, key), get_key_type(type), key_block(c, key)); break; case UBIFS_TRUN_KEY: sprintf(p, "(%lu, %s)", - key_inum(c, key), get_key_type(type)); + (unsigned long)key_inum(c, key), + get_key_type(type)); break; default: sprintf(p, "(bad key type: %#08x, %#08x)", @@ -1589,7 +1592,7 @@ static struct fsck_inode *add_inode(struct ubifs_info *c, if (inum > c->highest_inum) { ubifs_err("too high inode number, max. is %lu", - c->highest_inum); + (unsigned long)c->highest_inum); return ERR_PTR(-EINVAL); } @@ -1668,16 +1671,18 @@ static struct fsck_inode *read_add_inode(struct ubifs_info *c, ino_key_init(c, &key, inum); err = ubifs_lookup_level0(c, &key, &znode, &n); if (!err) { - ubifs_err("inode %lu not found in index", inum); + ubifs_err("inode %lu not found in index", (unsigned long)inum); return ERR_PTR(-ENOENT); } else if (err < 0) { - ubifs_err("error %d while looking up inode %lu", err, inum); + ubifs_err("error %d while looking up inode %lu", + err, (unsigned long)inum); return ERR_PTR(err); } zbr = &znode->zbranch[n]; if (zbr->len < UBIFS_INO_NODE_SZ) { - ubifs_err("bad node %lu node length %d", inum, zbr->len); + ubifs_err("bad node %lu node length %d", + (unsigned long)inum, zbr->len); return ERR_PTR(-EINVAL); } @@ -1697,7 +1702,7 @@ static struct fsck_inode *read_add_inode(struct ubifs_info *c, kfree(ino); if (IS_ERR(fscki)) { ubifs_err("error %ld while adding inode %lu node", - PTR_ERR(fscki), inum); + PTR_ERR(fscki), (unsigned long)inum); return fscki; } @@ -1786,7 +1791,8 @@ static int check_leaf(struct ubifs_info *c, struct ubifs_zbranch *zbr, if (IS_ERR(fscki)) { err = PTR_ERR(fscki); ubifs_err("error %d while processing data node and " - "trying to find inode node %lu", err, inum); + "trying to find inode node %lu", + err, (unsigned long)inum); goto out_dump; } @@ -1819,7 +1825,8 @@ static int check_leaf(struct ubifs_info *c, struct ubifs_zbranch *zbr, if (IS_ERR(fscki)) { err = PTR_ERR(fscki); ubifs_err("error %d while processing entry node and " - "trying to find inode node %lu", err, inum); + "trying to find inode node %lu", + err, (unsigned long)inum); goto out_dump; } @@ -1832,7 +1839,7 @@ static int check_leaf(struct ubifs_info *c, struct ubifs_zbranch *zbr, err = PTR_ERR(fscki); ubifs_err("error %d while processing entry node and " "trying to find parent inode node %lu", - err, inum); + err, (unsigned long)inum); goto out_dump; } @@ -1923,7 +1930,8 @@ static int check_inodes(struct ubifs_info *c, struct fsck_data *fsckd) fscki->references != 1) { ubifs_err("directory inode %lu has %d " "direntries which refer it, but " - "should be 1", fscki->inum, + "should be 1", + (unsigned long)fscki->inum, fscki->references); goto out_dump; } @@ -1931,27 +1939,29 @@ static int check_inodes(struct ubifs_info *c, struct fsck_data *fsckd) fscki->references != 0) { ubifs_err("root inode %lu has non-zero (%d) " "direntries which refer it", - fscki->inum, fscki->references); + (unsigned long)fscki->inum, + fscki->references); goto out_dump; } if (fscki->calc_sz != fscki->size) { ubifs_err("directory inode %lu size is %lld, " "but calculated size is %lld", - fscki->inum, fscki->size, - fscki->calc_sz); + (unsigned long)fscki->inum, + fscki->size, fscki->calc_sz); goto out_dump; } if (fscki->calc_cnt != fscki->nlink) { ubifs_err("directory inode %lu nlink is %d, " "but calculated nlink is %d", - fscki->inum, fscki->nlink, - fscki->calc_cnt); + (unsigned long)fscki->inum, + fscki->nlink, fscki->calc_cnt); goto out_dump; } } else { if (fscki->references != fscki->nlink) { ubifs_err("inode %lu nlink is %d, but " - "calculated nlink is %d", fscki->inum, + "calculated nlink is %d", + (unsigned long)fscki->inum, fscki->nlink, fscki->references); goto out_dump; } @@ -1959,20 +1969,21 @@ static int check_inodes(struct ubifs_info *c, struct fsck_data *fsckd) if (fscki->xattr_sz != fscki->calc_xsz) { ubifs_err("inode %lu has xattr size %u, but " "calculated size is %lld", - fscki->inum, fscki->xattr_sz, + (unsigned long)fscki->inum, fscki->xattr_sz, fscki->calc_xsz); goto out_dump; } if (fscki->xattr_cnt != fscki->calc_xcnt) { ubifs_err("inode %lu has %u xattrs, but " - "calculated count is %lld", fscki->inum, + "calculated count is %lld", + (unsigned long)fscki->inum, fscki->xattr_cnt, fscki->calc_xcnt); goto out_dump; } if (fscki->xattr_nms != fscki->calc_xnms) { ubifs_err("inode %lu has xattr names' size %u, but " "calculated names' size is %lld", - fscki->inum, fscki->xattr_nms, + (unsigned long)fscki->inum, fscki->xattr_nms, fscki->calc_xnms); goto out_dump; } @@ -1985,11 +1996,12 @@ out_dump: ino_key_init(c, &key, fscki->inum); err = ubifs_lookup_level0(c, &key, &znode, &n); if (!err) { - ubifs_err("inode %lu not found in index", fscki->inum); + ubifs_err("inode %lu not found in index", + (unsigned long)fscki->inum); return -ENOENT; } else if (err < 0) { ubifs_err("error %d while looking up inode %lu", - err, fscki->inum); + err, (unsigned long)fscki->inum); return err; } @@ -2007,7 +2019,7 @@ out_dump: } ubifs_msg("dump of the inode %lu sitting in LEB %d:%d", - fscki->inum, zbr->lnum, zbr->offs); + (unsigned long)fscki->inum, zbr->lnum, zbr->offs); dbg_dump_node(c, ino); kfree(ino); return -EINVAL; diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index 37a9e604c3e9..0422c98e1793 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -161,7 +161,7 @@ struct inode *ubifs_new_inode(struct ubifs_info *c, const struct inode *dir, return ERR_PTR(-EINVAL); } ubifs_warn("running out of inode numbers (current %lu, max %d)", - c->highest_inum, INUM_WATERMARK); + (unsigned long)c->highest_inum, INUM_WATERMARK); } inode->i_ino = ++c->highest_inum; diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c index 22993f867d19..f91b745908ea 100644 --- a/fs/ubifs/journal.c +++ b/fs/ubifs/journal.c @@ -690,8 +690,9 @@ int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode, int dlen = UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE * WORST_COMPR_FACTOR; struct ubifs_inode *ui = ubifs_inode(inode); - dbg_jnl("ino %lu, blk %u, len %d, key %s", key_inum(c, key), - key_block(c, key), len, DBGKEY(key)); + dbg_jnl("ino %lu, blk %u, len %d, key %s", + (unsigned long)key_inum(c, key), key_block(c, key), len, + DBGKEY(key)); ubifs_assert(len <= UBIFS_BLOCK_SIZE); data = kmalloc(dlen, GFP_NOFS); @@ -1128,7 +1129,8 @@ int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode, ino_t inum = inode->i_ino; unsigned int blk; - dbg_jnl("ino %lu, size %lld -> %lld", inum, old_size, new_size); + dbg_jnl("ino %lu, size %lld -> %lld", + (unsigned long)inum, old_size, new_size); ubifs_assert(!ui->data_len); ubifs_assert(S_ISREG(inode->i_mode)); ubifs_assert(mutex_is_locked(&ui->ui_mutex)); diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c index 02d3462f4d3e..9bd5a43d4526 100644 --- a/fs/ubifs/orphan.c +++ b/fs/ubifs/orphan.c @@ -105,7 +105,7 @@ int ubifs_add_orphan(struct ubifs_info *c, ino_t inum) list_add_tail(&orphan->list, &c->orph_list); list_add_tail(&orphan->new_list, &c->orph_new); spin_unlock(&c->orphan_lock); - dbg_gen("ino %lu", inum); + dbg_gen("ino %lu", (unsigned long)inum); return 0; } @@ -132,14 +132,16 @@ void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum) else { if (o->dnext) { spin_unlock(&c->orphan_lock); - dbg_gen("deleted twice ino %lu", inum); + dbg_gen("deleted twice ino %lu", + (unsigned long)inum); return; } if (o->cnext) { o->dnext = c->orph_dnext; c->orph_dnext = o; spin_unlock(&c->orphan_lock); - dbg_gen("delete later ino %lu", inum); + dbg_gen("delete later ino %lu", + (unsigned long)inum); return; } rb_erase(p, &c->orph_tree); @@ -151,12 +153,12 @@ void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum) } spin_unlock(&c->orphan_lock); kfree(o); - dbg_gen("inum %lu", inum); + dbg_gen("inum %lu", (unsigned long)inum); return; } } spin_unlock(&c->orphan_lock); - dbg_err("missing orphan ino %lu", inum); + dbg_err("missing orphan ino %lu", (unsigned long)inum); dbg_dump_stack(); } @@ -448,7 +450,7 @@ static void erase_deleted(struct ubifs_info *c) rb_erase(&orphan->rb, &c->orph_tree); list_del(&orphan->list); c->tot_orphans -= 1; - dbg_gen("deleting orphan ino %lu", orphan->inum); + dbg_gen("deleting orphan ino %lu", (unsigned long)orphan->inum); kfree(orphan); } c->orph_dnext = NULL; @@ -536,8 +538,8 @@ static int insert_dead_orphan(struct ubifs_info *c, ino_t inum) list_add_tail(&orphan->list, &c->orph_list); orphan->dnext = c->orph_dnext; c->orph_dnext = orphan; - dbg_mnt("ino %lu, new %d, tot %d", - inum, c->new_orphans, c->tot_orphans); + dbg_mnt("ino %lu, new %d, tot %d", (unsigned long)inum, + c->new_orphans, c->tot_orphans); return 0; } @@ -609,7 +611,8 @@ static int do_kill_orphans(struct ubifs_info *c, struct ubifs_scan_leb *sleb, n = (le32_to_cpu(orph->ch.len) - UBIFS_ORPH_NODE_SZ) >> 3; for (i = 0; i < n; i++) { inum = le64_to_cpu(orph->inos[i]); - dbg_rcvry("deleting orphaned inode %lu", inum); + dbg_rcvry("deleting orphaned inode %lu", + (unsigned long)inum); err = ubifs_tnc_remove_ino(c, inum); if (err) return err; @@ -840,8 +843,8 @@ static int dbg_orphan_check(struct ubifs_info *c, struct ubifs_zbranch *zbr, if (inum != ci->last_ino) { /* Lowest node type is the inode node, so it comes first */ if (key_type(c, &zbr->key) != UBIFS_INO_KEY) - ubifs_err("found orphan node ino %lu, type %d", inum, - key_type(c, &zbr->key)); + ubifs_err("found orphan node ino %lu, type %d", + (unsigned long)inum, key_type(c, &zbr->key)); ci->last_ino = inum; ci->tot_inos += 1; err = ubifs_tnc_read_node(c, zbr, ci->node); @@ -853,7 +856,8 @@ static int dbg_orphan_check(struct ubifs_info *c, struct ubifs_zbranch *zbr, /* Must be recorded as an orphan */ if (!dbg_find_check_orphan(&ci->root, inum) && !dbg_find_orphan(c, inum)) { - ubifs_err("missing orphan, ino %lu", inum); + ubifs_err("missing orphan, ino %lu", + (unsigned long)inum); ci->missing += 1; } } diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c index bed97421b972..90acac603e63 100644 --- a/fs/ubifs/recovery.c +++ b/fs/ubifs/recovery.c @@ -1435,13 +1435,13 @@ static int fix_size_in_place(struct ubifs_info *c, struct size_entry *e) err = ubi_leb_change(c->ubi, lnum, c->sbuf, len, UBI_UNKNOWN); if (err) goto out; - dbg_rcvry("inode %lu at %d:%d size %lld -> %lld ", e->inum, lnum, offs, - i_size, e->d_size); + dbg_rcvry("inode %lu at %d:%d size %lld -> %lld ", + (unsigned long)e->inum, lnum, offs, i_size, e->d_size); return 0; out: ubifs_warn("inode %lu failed to fix size %lld -> %lld error %d", - e->inum, e->i_size, e->d_size, err); + (unsigned long)e->inum, e->i_size, e->d_size, err); return err; } @@ -1472,7 +1472,8 @@ int ubifs_recover_size(struct ubifs_info *c) return err; if (err == -ENOENT) { /* Remove data nodes that have no inode */ - dbg_rcvry("removing ino %lu", e->inum); + dbg_rcvry("removing ino %lu", + (unsigned long)e->inum); err = ubifs_tnc_remove_ino(c, e->inum); if (err) return err; @@ -1493,8 +1494,8 @@ int ubifs_recover_size(struct ubifs_info *c) return PTR_ERR(inode); if (inode->i_size < e->d_size) { dbg_rcvry("ino %lu size %lld -> %lld", - e->inum, e->d_size, - inode->i_size); + (unsigned long)e->inum, + e->d_size, inode->i_size); inode->i_size = e->d_size; ubifs_inode(inode)->ui_size = e->d_size; e->inode = inode; diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c index 7399692af859..21f7d047c306 100644 --- a/fs/ubifs/replay.c +++ b/fs/ubifs/replay.c @@ -1065,7 +1065,7 @@ int ubifs_replay_journal(struct ubifs_info *c) ubifs_assert(c->bud_bytes <= c->max_bud_bytes || c->need_recovery); dbg_mnt("finished, log head LEB %d:%d, max_sqnum %llu, " "highest_inum %lu", c->lhead_lnum, c->lhead_offs, c->max_sqnum, - c->highest_inum); + (unsigned long)c->highest_inum); out: destroy_replay_tree(c); destroy_bud_list(c); diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c index d27fd918b9c9..99e9a744cfd0 100644 --- a/fs/ubifs/tnc.c +++ b/fs/ubifs/tnc.c @@ -2677,7 +2677,7 @@ int ubifs_tnc_remove_ino(struct ubifs_info *c, ino_t inum) struct ubifs_dent_node *xent, *pxent = NULL; struct qstr nm = { .name = NULL }; - dbg_tnc("ino %lu", inum); + dbg_tnc("ino %lu", (unsigned long)inum); /* * Walk all extended attribute entries and remove them together with @@ -2697,7 +2697,8 @@ int ubifs_tnc_remove_ino(struct ubifs_info *c, ino_t inum) } xattr_inum = le64_to_cpu(xent->inum); - dbg_tnc("xent '%s', ino %lu", xent->name, xattr_inum); + dbg_tnc("xent '%s', ino %lu", xent->name, + (unsigned long)xattr_inum); nm.name = xent->name; nm.len = le16_to_cpu(xent->nlen); -- cgit v1.2.3 From b77bcb07897f1a9cd9d1d78691896dcdb0fd1a22 Mon Sep 17 00:00:00 2001 From: Zoltan Sogor Date: Wed, 29 Oct 2008 09:50:02 +0100 Subject: UBI: fix EBADMSG handling 'ubi_io_read_data()' may return EBADMSG in case of an ECC error, and we should not panic because of this. We have CRC32 checksum and may check the data. So just ignore the EBADMSG error. This patch also fixes a minor spelling error at the same time. Signed-off-by: Zoltan Sogor Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/eba.c | 2 +- drivers/mtd/ubi/scan.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index e04bcf1dff87..d8966bae0e0b 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -1022,7 +1022,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, } /* - * OK, now the LEB is locked and we can safely start moving iy. Since + * OK, now the LEB is locked and we can safely start moving it. Since * this function utilizes thie @ubi->peb1_buf buffer which is shared * with some other functions, so lock the buffer by taking the * @ubi->buf_mutex. diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index 4f2daa5bbecf..41d47e1cf15c 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -320,7 +320,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb, } err = ubi_io_read_data(ubi, buf, pnum, 0, len); - if (err && err != UBI_IO_BITFLIPS) + if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG) goto out_free_buf; data_crc = be32_to_cpu(vid_hdr->data_crc); -- cgit v1.2.3 From 2ad49887150894b9ed6a87a76b409adceee6b074 Mon Sep 17 00:00:00 2001 From: Vitaliy Gusev Date: Wed, 5 Nov 2008 18:27:18 +0300 Subject: UBI: Don't exit from ubi_thread until kthread_should_stop() is true If ubi_thread() exits but kthread_should_stop() is not true then kthread_stop() will never return and cleanup thread will forever stay in "D" state. Signed-off-by: Vitaliy Gusev Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/wl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 05d70937b543..dcb6dac1dc54 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -1396,7 +1396,8 @@ int ubi_thread(void *u) ubi_msg("%s: %d consecutive failures", ubi->bgt_name, WL_MAX_FAILURES); ubi_ro_mode(ubi); - break; + ubi->thread_enabled = 0; + continue; } } else failures = 0; -- cgit v1.2.3 From 80be308dfa3798c7bad0fc81760b2faf83870e91 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 6 Nov 2008 14:59:05 +0100 Subject: AMD IOMMU: fix lazy IO/TLB flushing in unmap path Lazy flushing needs to take care of the unmap path too which is not yet implemented and leads to stale IO/TLB entries. This is fixed by this patch. Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 38e88d40ab10..4755bbc7ae5b 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -526,6 +526,9 @@ static void dma_ops_free_addresses(struct dma_ops_domain *dom, { address >>= PAGE_SHIFT; iommu_area_free(dom->bitmap, address, pages); + + if (address + pages >= dom->next_bit) + dom->need_flush = true; } /**************************************************************************** @@ -981,8 +984,10 @@ static void __unmap_single(struct amd_iommu *iommu, dma_ops_free_addresses(dma_dom, dma_addr, pages); - if (amd_iommu_unmap_flush) + if (amd_iommu_unmap_flush || dma_dom->need_flush) { iommu_flush_pages(iommu, dma_dom->domain.id, dma_addr, size); + dma_dom->need_flush = false; + } } /* -- cgit v1.2.3 From b9c3bfc24e1088d260de4091b2b41808c7398355 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 6 Nov 2008 12:05:40 +0000 Subject: x86: align DirectMap in /proc/meminfo Impact: right-align /proc/meminfo consistent with other fields When the split-LRU patches added Inactive(anon) and Inactive(file) lines to /proc/meminfo, all counts were moved two columns rightwards to fit in. Now move x86's DirectMap lines two columns rightwards to line up. Signed-off-by: Hugh Dickins Signed-off-by: Ingo Molnar --- arch/x86/mm/pageattr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index f1dc1b75d166..e89d24815f26 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -67,18 +67,18 @@ static void split_page_count(int level) void arch_report_meminfo(struct seq_file *m) { - seq_printf(m, "DirectMap4k: %8lu kB\n", + seq_printf(m, "DirectMap4k: %8lu kB\n", direct_pages_count[PG_LEVEL_4K] << 2); #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE) - seq_printf(m, "DirectMap2M: %8lu kB\n", + seq_printf(m, "DirectMap2M: %8lu kB\n", direct_pages_count[PG_LEVEL_2M] << 11); #else - seq_printf(m, "DirectMap4M: %8lu kB\n", + seq_printf(m, "DirectMap4M: %8lu kB\n", direct_pages_count[PG_LEVEL_2M] << 12); #endif #ifdef CONFIG_X86_64 if (direct_gbpages) - seq_printf(m, "DirectMap1G: %8lu kB\n", + seq_printf(m, "DirectMap1G: %8lu kB\n", direct_pages_count[PG_LEVEL_1G] << 20); #endif } -- cgit v1.2.3 From 8d00450d296dedec9ada38d43b83e79cca6fd5a3 Mon Sep 17 00:00:00 2001 From: Eduardo Habkost Date: Tue, 4 Nov 2008 12:52:44 -0200 Subject: Revert "x86: default to reboot via ACPI" This reverts commit c7ffa6c26277b403920e2255d10df849bd613380. the assumptio of this change was that this would not break any existing machine. Andrey Borzenkov reported troubles with the ACPI reboot method: the system would hang on reboot, necessiating a power cycle. Probably more systems are affected as well. Also, there are patches queued up for v2.6.29 to disable virtualization on emergency_restart() - which was the original motivation of this change. Reported-by: Andrey Borzenkov Bisected-by: Andrey Borzenkov Signed-off-by: Eduardo Habkost Acked-by: Avi Kivity Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f4c93f1cfc19..724adfc63cb9 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -29,11 +29,7 @@ EXPORT_SYMBOL(pm_power_off); static const struct desc_ptr no_idt = {}; static int reboot_mode; -/* - * Keyboard reset and triple fault may result in INIT, not RESET, which - * doesn't work when we're in vmx root mode. Try ACPI first. - */ -enum reboot_type reboot_type = BOOT_ACPI; +enum reboot_type reboot_type = BOOT_KBD; int reboot_force; #if defined(CONFIG_X86_32) && defined(CONFIG_SMP) -- cgit v1.2.3 From ab4f2ee130d5ffcf35616e1f5c6ab75af5b463b6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 6 Nov 2008 17:11:07 +0000 Subject: [ARM] fix naming of MODULE_START / MODULE_END As of 73bdf0a60e607f4b8ecc5aec597105976565a84f, the kernel needs to know where modules are located in the virtual address space. On ARM, we located this region between MODULE_START and MODULE_END. Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END. Update ARM to use the same naming, so is_vmalloc_or_module_addr() can work properly. Also update the comment on mm/vmalloc.c to reflect that ARM also places modules in a separate region from the vmalloc space. Signed-off-by: Russell King --- arch/arm/include/asm/memory.h | 12 ++++++------ arch/arm/kernel/module.c | 8 ++++---- arch/arm/mm/mmu.c | 4 ++-- mm/vmalloc.c | 2 +- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 809ff9ab853a..77764301844b 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -44,10 +44,10 @@ * The module space lives between the addresses given by TASK_SIZE * and PAGE_OFFSET - it must be within 32MB of the kernel text. */ -#define MODULE_END (PAGE_OFFSET) -#define MODULE_START (MODULE_END - 16*1048576) +#define MODULES_END (PAGE_OFFSET) +#define MODULES_VADDR (MODULES_END - 16*1048576) -#if TASK_SIZE > MODULE_START +#if TASK_SIZE > MODULES_VADDR #error Top of user space clashes with start of module space #endif @@ -56,7 +56,7 @@ * Since we use sections to map it, this macro replaces the physical address * with its virtual address while keeping offset from the base section. */ -#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff)) +#define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff)) /* * Allow 16MB-aligned ioremap pages @@ -94,8 +94,8 @@ /* * The module can be at any place in ram in nommu mode. */ -#define MODULE_END (END_MEM) -#define MODULE_START (PHYS_OFFSET) +#define MODULES_END (END_MEM) +#define MODULES_VADDR (PHYS_OFFSET) #endif /* !CONFIG_MMU */ diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 9203ba7d58ee..b8d965dcd6fd 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -26,12 +26,12 @@ /* * The XIP kernel text is mapped in the module area for modules and * some other stuff to work without any indirect relocations. - * MODULE_START is redefined here and not in asm/memory.h to avoid + * MODULES_VADDR is redefined here and not in asm/memory.h to avoid * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. */ extern void _etext; -#undef MODULE_START -#define MODULE_START (((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK) +#undef MODULES_VADDR +#define MODULES_VADDR (((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK) #endif #ifdef CONFIG_MMU @@ -43,7 +43,7 @@ void *module_alloc(unsigned long size) if (!size) return NULL; - area = __get_vm_area(size, VM_ALLOC, MODULE_START, MODULE_END); + area = __get_vm_area(size, VM_ALLOC, MODULES_VADDR, MODULES_END); if (!area) return NULL; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 8ba754064559..34e53596ff1d 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -654,7 +654,7 @@ static inline void prepare_page_table(struct meminfo *mi) /* * Clear out all the mappings below the kernel image. */ - for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE) + for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); #ifdef CONFIG_XIP_KERNEL @@ -766,7 +766,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ #ifdef CONFIG_XIP_KERNEL map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); - map.virtual = MODULE_START; + map.virtual = MODULES_VADDR; map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK; map.type = MT_ROM; create_mapping(&map); diff --git a/mm/vmalloc.c b/mm/vmalloc.c index f1cc03bbf6ac..66fad3fc02b1 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -178,7 +178,7 @@ static int vmap_page_range(unsigned long addr, unsigned long end, static inline int is_vmalloc_or_module_addr(const void *x) { /* - * x86-64 and sparc64 put modules in a special place, + * ARM, x86-64 and sparc64 put modules in a special place, * and fall back on vmalloc() if that fails. Others * just put it in the vmalloc space. */ -- cgit v1.2.3 From 1547a01226bcc3fd575fd5383b8b55476a02b518 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 6 Nov 2008 10:53:54 -0600 Subject: [IA64] reorder Kconfig options to match x86 No functional change, just reorder some config options and update the "Power management and ACPI" label to match the defacto x86 standard. Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 9f481ba59a4b..6bd91ed7cd03 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -586,7 +586,7 @@ source "fs/Kconfig.binfmt" endmenu -menu "Power management and ACPI" +menu "Power management and ACPI options" source "kernel/power/Kconfig" @@ -642,6 +642,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "arch/ia64/hp/sim/Kconfig" + config MSPEC tristate "Memory special operations driver" depends on IA64 @@ -653,6 +655,12 @@ config MSPEC source "fs/Kconfig" +source "arch/ia64/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + source "arch/ia64/kvm/Kconfig" source "lib/Kconfig" @@ -679,11 +687,3 @@ config IRQ_PER_CPU config IOMMU_HELPER def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC || SWIOTLB) - -source "arch/ia64/hp/sim/Kconfig" - -source "arch/ia64/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" -- cgit v1.2.3 From 62ee0540f5e5a804b79cae8b3c0185a85f02436b Mon Sep 17 00:00:00 2001 From: Doug Chapman Date: Wed, 5 Nov 2008 17:57:52 -0500 Subject: [IA64] fix boot panic caused by offline CPUs This fixes a regression introduced by 2c6e6db41f01b6b4eb98809350827c9678996698 "Minimize per_cpu reservations." That patch incorrectly used information about what CPUs are possible that was not yet initialized by ACPI. The end result was that per_cpu structures for offline CPUs were not initialized causing a NULL pointer reference. Since we cannot do the full acpi_boot_init() call any earlier, the simplest fix is to just parse the MADT for SAPIC entries early to find the CPU info. This should also allow for some cleanup of the code added by the "Minimize per_cpu reservations". This patch just fixes the regressions, the cleanup will come in a later patch. Signed-off-by: Doug Chapman Signed-off-by: Alex Chiang CC: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/kernel/acpi.c | 29 ++++++++++++++++++++++++----- arch/ia64/kernel/setup.c | 7 ++++--- 2 files changed, 28 insertions(+), 8 deletions(-) diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 0635015d0aaa..bd7acc71e8a9 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -678,6 +678,30 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) return 0; } +int __init early_acpi_boot_init(void) +{ + int ret; + + /* + * do a partial walk of MADT to determine how many CPUs + * we have including offline CPUs + */ + if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { + printk(KERN_ERR PREFIX "Can't find MADT\n"); + return 0; + } + + ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, + acpi_parse_lsapic, NR_CPUS); + if (ret < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no LAPIC entries\n"); + + return 0; +} + + + int __init acpi_boot_init(void) { @@ -701,11 +725,6 @@ int __init acpi_boot_init(void) printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, acpi_parse_lsapic, NR_CPUS) - < 1) - printk(KERN_ERR PREFIX - "Error parsing MADT - no LAPIC entries\n"); - if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0) < 0) printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index ae7911702bf8..bf441f49682c 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -561,8 +561,12 @@ setup_arch (char **cmdline_p) #ifdef CONFIG_ACPI /* Initialize the ACPI boot-time table parser */ acpi_table_init(); + early_acpi_boot_init(); # ifdef CONFIG_ACPI_NUMA acpi_numa_init(); +#ifdef CONFIG_ACPI_HOTPLUG_CPU + prefill_possible_map(); +#endif per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ? 32 : cpus_weight(early_cpu_possible_map)), additional_cpus > 0 ? additional_cpus : 0); @@ -853,9 +857,6 @@ void __init setup_per_cpu_areas (void) { /* start_kernel() requires this... */ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - prefill_possible_map(); -#endif } /* -- cgit v1.2.3 From b1cce6b1b2785fd61454b47ceacb461815407662 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 10:52:28 +0000 Subject: [ARM] mm: fix page table initialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As a result of the ptebits changes, we ended up marking device mappings as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with serial ports and the like. While reviewing the section mapping table entries, other errors in the memory type settings for devices were detected and confirmed to prevent Xscale3 platforms booting. Tested on: OMAP34xx (ARMv7), OMAP24xx (ARMv6), OMAP16xx (ARM926T, ARMv5), PXA311 (Xscale3), PXA272 (Xscale), PXA255 (Xscale), IXP42x (Xscale), S3C2410 (ARM920T, ARMv4T), ARM720T (ARMv4T) StrongARM-110 (ARMv4) Acked-by: Tony Lindgren Tested-by: Robert Jarzmik Tested-by: Mike Rapoport Tested-by: Ben Dooks Tested-by: Anders Grafström Signed-off-by: Russell King --- arch/arm/include/asm/system.h | 4 ++ arch/arm/mm/mmu.c | 107 ++++++++++++++++++++++++++++++------------ arch/arm/mm/proc-v7.S | 12 ++--- 3 files changed, 87 insertions(+), 36 deletions(-) diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 7aad78420f18..568020b34e3e 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -42,6 +42,10 @@ #define CR_U (1 << 22) /* Unaligned access operation */ #define CR_XP (1 << 23) /* Extended page tables */ #define CR_VE (1 << 24) /* Vectored interrupts */ +#define CR_EE (1 << 25) /* Exception (Big) Endian */ +#define CR_TRE (1 << 28) /* TEX remap enable */ +#define CR_AFE (1 << 29) /* Access flag enable */ +#define CR_TE (1 << 30) /* Thumb exception enable */ /* * This is used to ensure the compiler did actually allocate the register we diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 34e53596ff1d..e63db11f16a8 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -180,20 +180,20 @@ void adjust_cr(unsigned long mask, unsigned long set) #endif #define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_WRITE -#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_XN|PMD_SECT_AP_WRITE +#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE static struct mem_type mem_types[] = { [MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED | L_PTE_SHARED, .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PROT_SECT_DEVICE | PMD_SECT_UNCACHED, + .prot_sect = PROT_SECT_DEVICE | PMD_SECT_S, .domain = DOMAIN_IO, }, [MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED, .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PROT_SECT_DEVICE | PMD_SECT_TEX(2), + .prot_sect = PROT_SECT_DEVICE, .domain = DOMAIN_IO, }, [MT_DEVICE_CACHED] = { /* ioremap_cached */ @@ -205,7 +205,7 @@ static struct mem_type mem_types[] = { [MT_DEVICE_WC] = { /* ioremap_wc */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC, .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PROT_SECT_DEVICE | PMD_SECT_BUFFERABLE, + .prot_sect = PROT_SECT_DEVICE, .domain = DOMAIN_IO, }, [MT_CACHECLEAN] = { @@ -273,22 +273,23 @@ static void __init build_mem_type_table(void) #endif /* - * On non-Xscale3 ARMv5-and-older systems, use CB=01 - * (Uncached/Buffered) for ioremap_wc() mappings. On XScale3 - * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable - * in xsc3 parlance, Uncached Normal in ARMv6 parlance). + * Strip out features not present on earlier architectures. + * Pre-ARMv5 CPUs don't have TEX bits. Pre-ARMv6 CPUs or those + * without extended page tables don't have the 'Shared' bit. */ - if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) { - mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); - mem_types[MT_DEVICE_WC].prot_sect &= ~PMD_SECT_BUFFERABLE; - } + if (cpu_arch < CPU_ARCH_ARMv5) + for (i = 0; i < ARRAY_SIZE(mem_types); i++) + mem_types[i].prot_sect &= ~PMD_SECT_TEX(7); + if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3()) + for (i = 0; i < ARRAY_SIZE(mem_types); i++) + mem_types[i].prot_sect &= ~PMD_SECT_S; /* - * ARMv5 and lower, bit 4 must be set for page tables. - * (was: cache "update-able on write" bit on ARM610) - * However, Xscale cores require this bit to be cleared. + * ARMv5 and lower, bit 4 must be set for page tables (was: cache + * "update-able on write" bit on ARM610). However, Xscale and + * Xscale3 require this bit to be cleared. */ - if (cpu_is_xscale()) { + if (cpu_is_xscale() || cpu_is_xsc3()) { for (i = 0; i < ARRAY_SIZE(mem_types); i++) { mem_types[i].prot_sect &= ~PMD_BIT4; mem_types[i].prot_l1 &= ~PMD_BIT4; @@ -302,6 +303,64 @@ static void __init build_mem_type_table(void) } } + /* + * Mark the device areas according to the CPU/architecture. + */ + if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) { + if (!cpu_is_xsc3()) { + /* + * Mark device regions on ARMv6+ as execute-never + * to prevent speculative instruction fetches. + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN; + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN; + mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN; + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN; + } + if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) { + /* + * For ARMv7 with TEX remapping, + * - shared device is SXCB=1100 + * - nonshared device is SXCB=0100 + * - write combine device mem is SXCB=0001 + * (Uncached Normal memory) + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1); + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE; + } else if (cpu_is_xsc3()) { + /* + * For Xscale3, + * - shared device is TEXCB=00101 + * - nonshared device is TEXCB=01000 + * - write combine device mem is TEXCB=00100 + * (Inner/Outer Uncacheable in xsc3 parlance) + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED; + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); + } else { + /* + * For ARMv6 and ARMv7 without TEX remapping, + * - shared device is TEXCB=00001 + * - nonshared device is TEXCB=01000 + * - write combine device mem is TEXCB=00100 + * (Uncached Normal in ARMv6 parlance). + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); + } + } else { + /* + * On others, write combining is "Uncached/Buffered" + */ + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE; + } + + /* + * Now deal with the memory-type mappings + */ cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; @@ -317,12 +376,8 @@ static void __init build_mem_type_table(void) * Enable CPU-specific coherency if supported. * (Only available on XSC3 at the moment.) */ - if (arch_is_coherent()) { - if (cpu_is_xsc3()) { - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; - } - } + if (arch_is_coherent() && cpu_is_xsc3()) + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; /* * ARMv6 and above have extended page tables. @@ -336,11 +391,6 @@ static void __init build_mem_type_table(void) mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; - /* - * Mark the device area as "shared device" - */ - mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; - #ifdef CONFIG_SMP /* * Mark memory with the "shared" attribute for SMP systems @@ -360,9 +410,6 @@ static void __init build_mem_type_table(void) mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot; mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot; - if (cpu_arch < CPU_ARCH_ARMv5) - mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); - pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot); pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 07f82db70945..4d3c0a73e7fb 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -115,7 +115,7 @@ ENTRY(cpu_v7_set_pte_ext) orr r3, r3, r2 orr r3, r3, #PTE_EXT_AP0 | 2 - tst r2, #1 << 4 + tst r1, #1 << 4 orrne r3, r3, #PTE_EXT_TEX(1) tst r1, #L_PTE_WRITE @@ -192,11 +192,11 @@ __v7_setup: mov pc, lr @ return to head.S:__ret ENDPROC(__v7_setup) - /* - * V X F I D LR - * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM - * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced - * 0 110 0011 1.00 .111 1101 < we want + /* AT + * TFR EV X F I D LR + * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM + * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced + * 1 0 110 0011 1.00 .111 1101 < we want */ .type v7_crval, #object v7_crval: -- cgit v1.2.3 From c7cf72dcadbe39c2077b32460f86c9f8167be3be Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 6 Nov 2008 17:43:55 -0700 Subject: [ARM] xsc3: fix xsc3_l2_inv_range MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When 'start' and 'end' are less than a cacheline apart and 'start' is unaligned we are done after cleaning and invalidating the first cacheline. So check for (start < end) which will not walk off into invalid address ranges when (start > end). This issue was caught by drivers/dma/dmatest. 2.6.27 is susceptible. Cc: Cc: Haavard Skinnemoen Cc: Lothar WaÃ<9f>mann Cc: Lennert Buytenhek Cc: Eric Miao Signed-off-by: Dan Williams --- arch/arm/mm/cache-xsc3l2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c index 10b1bae1a258..464de893a988 100644 --- a/arch/arm/mm/cache-xsc3l2.c +++ b/arch/arm/mm/cache-xsc3l2.c @@ -98,7 +98,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) /* * Clean and invalidate partial last cache line. */ - if (end & (CACHE_LINE_SIZE - 1)) { + if (start < end && (end & (CACHE_LINE_SIZE - 1))) { xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1)); xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); end &= ~(CACHE_LINE_SIZE - 1); @@ -107,7 +107,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) /* * Invalidate all full cache lines between 'start' and 'end'. */ - while (start != end) { + while (start < end) { xsc3_l2_inv_pa(start); start += CACHE_LINE_SIZE; } -- cgit v1.2.3 From 5704d626e7c770ef4a984a697bac7eff07420a39 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:42 -0700 Subject: ACPI: remove comments about debug layer/level to use I don't think there's any point in cluttering the code with these. Better to improve the documentation so *anybody* can figure out what layer & level to use. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/pci_root.c | 6 ------ drivers/acpi/video.c | 6 ------ 2 files changed, 12 deletions(-) diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 1b8f67d21d53..642554b1b60c 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -376,15 +376,9 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type) static int __init acpi_pci_root_init(void) { - if (acpi_pci_disabled) return 0; - /* DEBUG: - acpi_dbg_layer = ACPI_PCI_COMPONENT; - acpi_dbg_level = 0xFFFFFFFF; - */ - if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0) return -ENODEV; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a29b0ccac65a..bf0c26a7368d 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -2094,12 +2094,6 @@ static int __init acpi_video_init(void) { int result = 0; - - /* - acpi_dbg_level = 0xFFFFFFFF; - acpi_dbg_layer = 0x08000000; - */ - acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir); if (!acpi_video_dir) return -ENODEV; -- cgit v1.2.3 From 5b881479af4352791e5004b74e3639f1416c5fe4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:47 -0700 Subject: ACPI: SBS: remove useless acpi_cm_sbs_init() initcall acpi_cm_sbs_init() doesn't do anything, so we can just remove it. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/cm_sbs.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c index 4441e84b28a9..80d5c88e68c3 100644 --- a/drivers/acpi/cm_sbs.c +++ b/drivers/acpi/cm_sbs.c @@ -105,9 +105,3 @@ void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param) return; } EXPORT_SYMBOL(acpi_unlock_battery_dir); - -static int __init acpi_cm_sbs_init(void) -{ - return 0; -} -subsys_initcall(acpi_cm_sbs_init); -- cgit v1.2.3 From fefe5ab3d67b0ade6200fec5ed6f2812cbcbb658 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:58 -0700 Subject: ACPI: remove CONFIG_ACPI_POWER Remove CONFIG_ACPI_POWER. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". The interfaces under CONFIG_ACPI_POWER (acpi_device_sleep_wake(), acpi_power_transition(), etc) are called unconditionally from the ACPI core, so we already depend on it always being present. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 4 ---- drivers/acpi/Makefile | 2 +- include/acpi/acpi_drivers.h | 2 -- 3 files changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index f4f632917509..4fa7866a9a5e 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -341,10 +341,6 @@ config ACPI_PCI_SLOT help you correlate PCI bus addresses with the physical geography of your slots. If you are unsure, say N. -config ACPI_POWER - bool - default y - config ACPI_SYSTEM bool default y diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d91c027ece8f..8017f63920c4 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -51,7 +51,7 @@ obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_CONTAINER) += container.o obj-$(CONFIG_ACPI_THERMAL) += thermal.o -obj-$(CONFIG_ACPI_POWER) += power.o +obj-y += power.o obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index cf04c6011c2a..818215f89e7a 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -86,7 +86,6 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain, Power Resource -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_POWER int acpi_device_sleep_wake(struct acpi_device *dev, int enable, int sleep_state, int dev_state); int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state); @@ -94,7 +93,6 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev); int acpi_power_get_inferred_state(struct acpi_device *device); int acpi_power_transition(struct acpi_device *device, int state); extern int acpi_power_nocheck; -#endif /* -------------------------------------------------------------------------- Embedded Controller -- cgit v1.2.3 From 8950d89acaa8c353869e681772479d7955ae6f7a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:18:03 -0700 Subject: ACPI: remove CONFIG_ACPI_EC Remove CONFIG_ACPI_EC. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Per section 6.5.4 of the ACPI 3.0b specification, OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. The ECDT table is optional, but if it is present, the above text means that the EC it describes is a required part of the ACPI subsystem, so CONFIG_ACPI_EC=n wouldn't make sense. Signed-off-by: Bjorn Helgaas Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 8 -------- drivers/acpi/Makefile | 2 +- drivers/acpi/bus.c | 3 +-- drivers/char/sonypi.c | 4 ++-- drivers/misc/Kconfig | 4 ++-- include/acpi/acpi_drivers.h | 2 -- include/linux/acpi.h | 4 ---- 7 files changed, 6 insertions(+), 21 deletions(-) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 4fa7866a9a5e..90cb2a823b56 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -324,14 +324,6 @@ config ACPI_DEBUG_FUNC_TRACE ACPI Debug Statements slow down ACPI processing. Function trace is about half of the penalty and is rarely useful. -config ACPI_EC - bool - default y - help - This driver is required on some systems for the proper operation of - the battery and thermal drivers. If you are compiling for a - mobile system, say Y. - config ACPI_PCI_SLOT tristate "PCI slot detection driver" default n diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 8017f63920c4..fc622316a7d8 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -39,7 +39,7 @@ obj-y += sleep/ obj-y += bus.o glue.o obj-y += scan.o # Keep EC driver first. Initialization of others depend on it. -obj-$(CONFIG_ACPI_EC) += ec.o +obj-y += ec.o obj-$(CONFIG_ACPI_AC) += ac.o obj-$(CONFIG_ACPI_BATTERY) += battery.o obj-$(CONFIG_ACPI_BUTTON) += button.o diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index c797c6473f31..765fd1c56cd6 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -774,7 +774,7 @@ static int __init acpi_bus_init(void) "Unable to initialize ACPI OS objects\n"); goto error1; } -#ifdef CONFIG_ACPI_EC + /* * ACPI 2.0 requires the EC driver to be loaded and work before * the EC device is found in the namespace (i.e. before acpi_initialize_objects() @@ -785,7 +785,6 @@ static int __init acpi_bus_init(void) */ status = acpi_ec_ecdt_probe(); /* Ignore result. Not having an ECDT is not fatal. */ -#endif status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION); if (ACPI_FAILURE(status)) { diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 85e0eb76eeab..1b128d1e2150 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -523,7 +523,7 @@ static int acpi_driver_registered; static int sonypi_ec_write(u8 addr, u8 value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_write(addr, value); #endif @@ -539,7 +539,7 @@ static int sonypi_ec_write(u8 addr, u8 value) static int sonypi_ec_read(u8 addr, u8 *value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_read(addr, value); #endif diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 9494400e8fd0..4494ad27cbf1 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -230,7 +230,7 @@ config HP_WMI config MSI_LAPTOP tristate "MSI Laptop Extras" depends on X86 - depends on ACPI_EC + depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by MSI (MICRO-STAR @@ -260,7 +260,7 @@ config PANASONIC_LAPTOP config COMPAL_LAPTOP tristate "Compal Laptop Extras" depends on X86 - depends on ACPI_EC + depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by Compal: diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 818215f89e7a..b3c40dc9d6ba 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -97,10 +97,8 @@ extern int acpi_power_nocheck; /* -------------------------------------------------------------------------- Embedded Controller -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_EC int acpi_ec_ecdt_probe(void); int acpi_boot_ec_enable(void); -#endif /* -------------------------------------------------------------------------- Processor diff --git a/include/linux/acpi.h b/include/linux/acpi.h index fd6a452b0ceb..d7846bdd2721 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -163,8 +163,6 @@ struct acpi_pci_driver { int acpi_pci_register_driver(struct acpi_pci_driver *driver); void acpi_pci_unregister_driver(struct acpi_pci_driver *driver); -#ifdef CONFIG_ACPI_EC - extern int ec_read(u8 addr, u8 *val); extern int ec_write(u8 addr, u8 val); extern int ec_transaction(u8 command, @@ -172,8 +170,6 @@ extern int ec_transaction(u8 command, u8 *rdata, unsigned rdata_len, int force_poll); -#endif /*CONFIG_ACPI_EC*/ - #if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE) typedef void (*wmi_notify_handler) (u32 value, void *context); -- cgit v1.2.3 From 934f6c3f8e7f5d6a6d07ae2df283fd02393019dd Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 6 Nov 2008 15:49:04 -0500 Subject: Revert "ath5k: honor FIF_BCN_PRBRESP_PROMISC in STA mode" Unfortunately, the result was that mac80211 didn't see all the beacons it actually wanted to see. This caused lost associations. Hopefully we can revisit this when mac80211 is less greedy about seeing beacons directly... This reverts commit 063279062a8c530cc90fb77797db16c49c905b26. Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 9e47d727e220..cfd4d052d666 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2942,8 +2942,10 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == NL80211_IFTYPE_ADHOC) + if (sc->opmode == NL80211_IFTYPE_STATION || + sc->opmode == NL80211_IFTYPE_ADHOC) { rfilt |= AR5K_RX_FILTER_BEACON; + } /* Set filters */ ath5k_hw_set_rx_filter(ah,rfilt); -- cgit v1.2.3 From 502c12e1ef14967e08dabb04c674cf0f000e8f7e Mon Sep 17 00:00:00 2001 From: Mohamed Abbas Date: Thu, 23 Oct 2008 23:48:54 -0700 Subject: iwlwifi: clear scanning bits upon failure In iwl_bg_request_scan function, if we could not send a scan command it will go to done. In done it does the right thing to call mac80211 with scan complete, but the problem is STATUS_SCAN_HW is still set causing any future scan to fail. Fix by clearing the scanning status bits if scan fails. Signed-off-by: Mohamed Abbas Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 3b0bee331a33..c89365e2ca58 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -896,6 +896,13 @@ static void iwl_bg_request_scan(struct work_struct *data) return; done: + /* Cannot perform scan. Make sure we clear scanning + * bits from status so next scan request can be performed. + * If we don't clear scanning status bit here all next scan + * will fail + */ + clear_bit(STATUS_SCAN_HW, &priv->status); + clear_bit(STATUS_SCANNING, &priv->status); /* inform mac80211 scan aborted */ queue_work(priv->workqueue, &priv->scan_completed); mutex_unlock(&priv->mutex); -- cgit v1.2.3 From 964d2777438bf7687324243d38ade538d9bbfe3c Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 30 Oct 2008 14:12:21 -0400 Subject: iwlagn: avoid sleep in softirq context __ieee80211_tasklet_handler -> __ieee80211_rx -> __ieee80211_rx_handle_packet -> ieee80211_invoke_rx_handlers -> ieee80211_rx_h_decrypt -> ieee80211_crypto_tkip_decrypt -> ieee80211_tkip_decrypt_data -> iwl4965_mac_update_tkip_key -> iwl_scan_cancel_timeout -> msleep Ooops! Avoid the sleep by changing iwl_scan_cancel_timeout with iwl_scan_cancel and simply returning on failure if the scan persists. This will cause hardware decryption to fail and we'll handle a few more frames with software decryption. Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 321dbc8c034a..8d690a0eb1a9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3252,7 +3252,11 @@ static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, return; } - iwl_scan_cancel_timeout(priv, 100); + if (iwl_scan_cancel(priv)) { + /* cancel scan failed, just live w/ bad key and rely + briefly on SW decryption */ + return; + } key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); -- cgit v1.2.3 From 4a9d916717de0aab4313d43817164577255242fb Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Thu, 30 Oct 2008 22:46:48 +0000 Subject: Fix logic error in rfkill_check_duplicity > I'll have a prod at why the [hso] rfkill stuff isn't working next Ok, I believe this is due to the addition of rfkill_check_duplicity in rfkill and the fact that test_bit actually returns a negative value rather than the postive one expected (which is of course equally true). So when the second WLAN device (the hso device, with the EEE PC WLAN being the first) comes along rfkill_check_duplicity returns a negative value and so rfkill_register returns an error. Patch below fixes this for me. Signed-Off-By: Jonathan McDowell Acked-by: Henrique de Moraes Holschuh Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index f949a482b007..25ba3bd57e66 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -603,7 +603,7 @@ static int rfkill_check_duplicity(const struct rfkill *rfkill) } /* 0: first switch of its kind */ - return test_bit(rfkill->type, seen); + return (test_bit(rfkill->type, seen)) ? 1 : 0; } static int rfkill_add_switch(struct rfkill *rfkill) -- cgit v1.2.3 From 0feec9dfe7b8880ab3b4c38d7cc4107dd706ea7f Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sat, 1 Nov 2008 17:03:48 +0000 Subject: zd1211rw: Add 2 device IDs 07fa/1196 Bewan BWIFI-USB54AR: Tested by night1308, this device is a ZD1211B with an AL2230S radio. 0ace/b215 HP 802.11abg: Tested by Robert Philippe Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index a60ae86bd5c9..a3ccd8c1c716 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -61,6 +61,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B }, @@ -82,6 +83,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B }, /* "Driverless" devices that need ejecting */ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER }, -- cgit v1.2.3 From c793033945bea23d7a6e0d8d94b2da6603e02af2 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 3 Nov 2008 22:14:00 -0500 Subject: ath5k: correct handling of rx status fields ath5k_rx_status fields rs_antenna and rs_more are u8s, but we were setting them with bitwise ANDs of 32-bit values. As a consequence, jumbo frames would not be discarded as intended. Then, because the hw rate value of such frames is zero, and, since "ath5k: rates cleanup", we do not fall back to the basic rate, such packets would trigger the following WARN_ON: ------------[ cut here ]------------ WARNING: at net/mac80211/rx.c:2192 __ieee80211_rx+0x4d/0x57e [mac80211]() Modules linked in: ath5k af_packet sha256_generic aes_i586 aes_generic cbc loop i915 drm binfmt_misc acpi_cpufreq fan container nls_utf8 hfsplus dm_crypt dm_mod kvm_intel kvm fuse sbp2 snd_hda_intel snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss arc4 joydev hid_apple ecb snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device usbhid appletouch mac80211 sky2 snd ehci_hcd ohci1394 bitrev crc32 sr_mod cdrom rtc sg uhci_hcd snd_page_alloc cfg80211 ieee1394 thermal ac battery processor button evdev unix [last unloaded: ath5k] Pid: 0, comm: swapper Tainted: G W 2.6.28-rc2-wl #14 Call Trace: [] warn_on_slowpath+0x41/0x5b [] ? sched_debug_show+0x31e/0x9c6 [] ? vprintk+0x369/0x389 [] ? _spin_unlock_irqrestore+0x54/0x58 [] ? try_to_wake_up+0x14f/0x15a [] __ieee80211_rx+0x4d/0x57e [mac80211] [] ath5k_tasklet_rx+0x5a1/0x5e4 [ath5k] [] ? clockevents_program_event+0xd4/0xe3 [] tasklet_action+0x94/0xfd [] __do_softirq+0x8c/0x13e [] do_softirq+0x39/0x55 [] irq_exit+0x46/0x85 [] do_IRQ+0x9a/0xb2 [] common_interrupt+0x28/0x30 [] ? acpi_idle_enter_bm+0x2ad/0x31b [processor] [] cpuidle_idle_call+0x65/0x9a [] cpu_idle+0x76/0xa6 [] rest_init+0x62/0x64 Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/desc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c index dd1374052ba9..5e362a7a3620 100644 --- a/drivers/net/wireless/ath5k/desc.c +++ b/drivers/net/wireless/ath5k/desc.c @@ -531,10 +531,10 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_MORE; + rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA); + rs->rs_more = !!(rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_MORE); /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); @@ -607,10 +607,10 @@ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_MORE; + rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA); + rs->rs_more = !!(rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_MORE); rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); rs->rs_status = 0; -- cgit v1.2.3 From 2420ebc104d38567ee977a3c15dc675a9dd3b07c Mon Sep 17 00:00:00 2001 From: Mohamed Abbas Date: Tue, 4 Nov 2008 12:21:34 -0800 Subject: iwl3945: clear scanning bits upon failure This patch ensures we clear any scan status bit when an error occurs while sending the scan command. It is the implementation of patch: "iwlwifi: clear scanning bits upon failure" for iwl3945. Signed-off-by: Mohamed Abbas Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index d15a2c997954..b9eac5551d82 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6273,6 +6273,14 @@ static void iwl3945_bg_request_scan(struct work_struct *data) return; done: + /* can not perform scan make sure we clear scanning + * bits from status so next scan request can be performed. + * if we dont clear scanning status bit here all next scan + * will fail + */ + clear_bit(STATUS_SCAN_HW, &priv->status); + clear_bit(STATUS_SCANNING, &priv->status); + /* inform mac80211 scan aborted */ queue_work(priv->workqueue, &priv->scan_completed); mutex_unlock(&priv->mutex); -- cgit v1.2.3 From 14b5433606289dbc5b6fd70ced11462f80e95003 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Tue, 4 Nov 2008 12:21:35 -0800 Subject: iwl3945: do not send scan command if channel count zero Do not send scan command if no channels to scan. This avoids a Microcode error as reported in: http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1650 http://bugzilla.kernel.org/show_bug.cgi?id=11806 http://marc.info/?l=linux-wireless&m=122437145211886&w=2 Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index b9eac5551d82..81dfcb882857 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6256,6 +6256,11 @@ static void iwl3945_bg_request_scan(struct work_struct *data) n_probes, (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + if (scan->channel_count == 0) { + IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count); + goto done; + } + cmd.len += le16_to_cpu(scan->tx_cmd.len) + scan->channel_count * sizeof(struct iwl3945_scan_channel); cmd.data = scan; -- cgit v1.2.3 From d54bc4e3fc5c56600a13c9ebc0a7e1077ac05d59 Mon Sep 17 00:00:00 2001 From: "Zhu, Yi" Date: Tue, 4 Nov 2008 12:21:36 -0800 Subject: iwl3945: fix deadlock on suspend This patch fixes iwl3945 deadlock during suspend by moving notify_mac out of iwl3945 mutex. This is a portion of the same fix for iwlwifi by Tomas. Signed-off-by: Zhu Yi Signed-off-by: Tomas Winkler Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 81dfcb882857..285b53e7e261 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -5768,7 +5768,6 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) if (priv->error_recovering) iwl3945_error_recovery(priv); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); return; restart: @@ -6013,6 +6012,7 @@ static void iwl3945_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl3945_alive_start(priv); mutex_unlock(&priv->mutex); + ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl3945_bg_rf_kill(struct work_struct *work) -- cgit v1.2.3 From ac51d83705c2a38c71f39cde99708b14e6212a60 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 6 Nov 2008 16:49:36 -0500 Subject: ext4: calculate journal credits correctly This fixes a 2.6.27 regression which was introduced in commit a02908f1. We weren't passing the chunk parameter down to the two subections, ext4_indirect_trans_blocks() and ext4_ext_index_trans_blocks(), with the result that massively overestimate the amount of credits needed by ext4_da_writepages, especially in the non-extents case. This causes failures especially on /boot partitions, which tend to be small and non-extent using since GRUB doesn't handle extents. This patch fixes the bug reported by Joseph Fannin at: http://bugzilla.kernel.org/show_bug.cgi?id=11964 Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 8dbf6953845b..5a130b56f1cf 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4580,9 +4580,10 @@ static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks, static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk) { if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) - return ext4_indirect_trans_blocks(inode, nrblocks, 0); - return ext4_ext_index_trans_blocks(inode, nrblocks, 0); + return ext4_indirect_trans_blocks(inode, nrblocks, chunk); + return ext4_ext_index_trans_blocks(inode, nrblocks, chunk); } + /* * Account for index blocks, block groups bitmaps and block group * descriptor blocks if modify datablocks and index blocks -- cgit v1.2.3 From f8d570a4745835f2238a33b537218a1bb03fc671 Mon Sep 17 00:00:00 2001 From: David Miller Date: Thu, 6 Nov 2008 00:37:40 -0800 Subject: net: Fix recursive descent in __scm_destroy(). __scm_destroy() walks the list of file descriptors in the scm_fp_list pointed to by the scm_cookie argument. Those, in turn, can close sockets and invoke __scm_destroy() again. There is nothing which limits how deeply this can occur. The idea for how to fix this is from Linus. Basically, we do all of the fput()s at the top level by collecting all of the scm_fp_list objects hit by an fput(). Inside of the initial __scm_destroy() we keep running the list until it is empty. Signed-off-by: David S. Miller Signed-off-by: Linus Torvalds --- include/linux/sched.h | 2 ++ include/net/scm.h | 5 +++-- net/core/scm.c | 24 +++++++++++++++++++++--- 3 files changed, 26 insertions(+), 5 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index b483f39a7112..295b7c756ca6 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1349,6 +1349,8 @@ struct task_struct { */ unsigned long timer_slack_ns; unsigned long default_timer_slack_ns; + + struct list_head *scm_work_list; }; /* diff --git a/include/net/scm.h b/include/net/scm.h index 06df126103ca..33e9986beb86 100644 --- a/include/net/scm.h +++ b/include/net/scm.h @@ -14,8 +14,9 @@ struct scm_fp_list { - int count; - struct file *fp[SCM_MAX_FD]; + struct list_head list; + int count; + struct file *fp[SCM_MAX_FD]; }; struct scm_cookie diff --git a/net/core/scm.c b/net/core/scm.c index 10f5c65f6a47..ab242cc1acca 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -75,6 +75,7 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp) if (!fpl) return -ENOMEM; *fplp = fpl; + INIT_LIST_HEAD(&fpl->list); fpl->count = 0; } fpp = &fpl->fp[fpl->count]; @@ -106,9 +107,25 @@ void __scm_destroy(struct scm_cookie *scm) if (fpl) { scm->fp = NULL; - for (i=fpl->count-1; i>=0; i--) - fput(fpl->fp[i]); - kfree(fpl); + if (current->scm_work_list) { + list_add_tail(&fpl->list, current->scm_work_list); + } else { + LIST_HEAD(work_list); + + current->scm_work_list = &work_list; + + list_add(&fpl->list, &work_list); + while (!list_empty(&work_list)) { + fpl = list_first_entry(&work_list, struct scm_fp_list, list); + + list_del(&fpl->list); + for (i=fpl->count-1; i>=0; i--) + fput(fpl->fp[i]); + kfree(fpl); + } + + current->scm_work_list = NULL; + } } } @@ -284,6 +301,7 @@ struct scm_fp_list *scm_fp_dup(struct scm_fp_list *fpl) new_fpl = kmalloc(sizeof(*fpl), GFP_KERNEL); if (new_fpl) { + INIT_LIST_HEAD(&new_fpl->list); for (i=fpl->count-1; i>=0; i--) get_file(fpl->fp[i]); memcpy(new_fpl, fpl, sizeof(*fpl)); -- cgit v1.2.3 From 47cb2ed9df2789fc4a3fe1201e475078f93c4839 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 6 Nov 2008 13:48:24 -0800 Subject: x86, xen: fix use of pgd_page now that it really does return a page Impact: fix 32-bit Xen guest boot crash On 32-bit PAE, pud_page, for no good reason, didn't really return a struct page *. Since Jan Beulich's fix "i386/PAE: fix pud_page()", pud_page does return a struct page *. Because PAE has 3 pagetable levels, the pud level is folded into the pgd level, so pgd_page() is the same as pud_page(), and now returns a struct page *. Update the xen/mmu.c code which uses pgd_page() accordingly. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index aba77b2b7d18..49697d86c6a5 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -874,7 +874,7 @@ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd) #else /* CONFIG_X86_32 */ #ifdef CONFIG_X86_PAE /* Need to make sure unshared kernel PMD is pinnable */ - xen_pin_page(mm, virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), + xen_pin_page(mm, pgd_page(pgd[pgd_index(TASK_SIZE)]), PT_PMD); #endif xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd))); @@ -991,7 +991,7 @@ static void __xen_pgd_unpin(struct mm_struct *mm, pgd_t *pgd) #ifdef CONFIG_X86_PAE /* Need to make sure unshared kernel PMD is unpinned */ - xen_unpin_page(mm, virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), + xen_unpin_page(mm, pgd_page(pgd[pgd_index(TASK_SIZE)]), PT_PMD); #endif -- cgit v1.2.3 From 77ca7286d10b798e4907af941f29672bf484db77 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Thu, 6 Nov 2008 12:53:14 -0800 Subject: cciss: new hardware support Add support for 2 new SAS/SATA controllers. Signed-off-by: Mike Miller Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cciss.txt | 2 ++ drivers/block/cciss.c | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index 8244c6442faa..48d80d95f0f8 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -26,6 +26,8 @@ This driver is known to work with the following cards: * SA P410i * SA P411 * SA P812 + * SA P712m + * SA P711m Detecting drive failures: ------------------------- diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 4023885353e0..00048bd26e7d 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -96,6 +96,8 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B}, {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} @@ -133,6 +135,8 @@ static struct board_type products[] = { {0x3245103C, "Smart Array P410i", &SA5_access}, {0x3247103C, "Smart Array P411", &SA5_access}, {0x3249103C, "Smart Array P812", &SA5_access}, + {0x324A103C, "Smart Array P712m", &SA5_access}, + {0x324B103C, "Smart Array P711m", &SA5_access}, {0xFFFF103C, "Unknown Smart Array", &SA5_access}, }; -- cgit v1.2.3 From 2197d18ded232ef6eef63cce57b6b21eddf1b7b6 Mon Sep 17 00:00:00 2001 From: Andrey Borzenkov Date: Thu, 6 Nov 2008 12:53:15 -0800 Subject: cpqarry: fix return value of cpqarray_init() As reported by Dick Gevers on Compaq ProLiant: Oct 13 18:06:51 dvgcpl kernel: Compaq SMART2 Driver (v 2.6.0) Oct 13 18:06:51 dvgcpl kernel: sys_init_module: 'cpqarray'->init suspiciously returned 1, it should follow 0/-E convention Oct 13 18:06:51 dvgcpl kernel: sys_init_module: loading module anyway... Oct 13 18:06:51 dvgcpl kernel: Pid: 315, comm: modprobe Not tainted 2.6.27-desktop-0.rc8.2mnb #1 Oct 13 18:06:51 dvgcpl kernel: [] ? printk+0x18/0x1e Oct 13 18:06:51 dvgcpl kernel: [] sys_init_module+0x155/0x1c0 Oct 13 18:06:51 dvgcpl kernel: [] syscall_call+0x7/0xb Oct 13 18:06:51 dvgcpl kernel: ======================= Make it return 0 on success and -ENODEV if no array was found. Reported-by: Dick Gevers Signed-off-by: Andrey Borzenkov Cc: Jens Axboe Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cpqarray.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index 47d233c6d0b3..5d39df14ed90 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -567,7 +567,12 @@ static int __init cpqarray_init(void) num_cntlrs_reg++; } - return(num_cntlrs_reg); + if (num_cntlrs_reg) + return 0; + else { + pci_unregister_driver(&cpqarray_pci_driver); + return -ENODEV; + } } /* Function to find the first free pointer into our hba[] array */ -- cgit v1.2.3 From a564738c1c9c7b9ed696bf4116267789201ac8ac Mon Sep 17 00:00:00 2001 From: Wolfgang Kroworsch Date: Thu, 6 Nov 2008 12:53:16 -0800 Subject: vt: incomplete initialization of vc_tab_stop Problem 1 (see patch below): vc_tab_stop is declared as an array of 8 unsigned ints in struct vc_data in include/linux/console_struct.h . In drivers/char/vt.c only 5 of these 8 unsigned ints get initialized leading to unintended tabulator placement on displays with more than 160 columns text. Problem 2 (open): Upcoming displays will have more than 256 columns of text leading to invalid memory access in drivers/char/vt.c during tabulator calculations: if (vc->vc_tab_stop[vc->vc_x >> 5] & (1 << (vc->vc_x & 31))) break; Signed-off-by: Wolfgang Kroworsch Cc: Alan Cox Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/vt.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/char/vt.c b/drivers/char/vt.c index d8f83e26e4a4..a5af6072e2b3 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -1644,7 +1644,10 @@ static void reset_terminal(struct vc_data *vc, int do_clear) vc->vc_tab_stop[1] = vc->vc_tab_stop[2] = vc->vc_tab_stop[3] = - vc->vc_tab_stop[4] = 0x01010101; + vc->vc_tab_stop[4] = + vc->vc_tab_stop[5] = + vc->vc_tab_stop[6] = + vc->vc_tab_stop[7] = 0x01010101; vc->vc_bell_pitch = DEFAULT_BELL_PITCH; vc->vc_bell_duration = DEFAULT_BELL_DURATION; @@ -1935,7 +1938,10 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) vc->vc_tab_stop[1] = vc->vc_tab_stop[2] = vc->vc_tab_stop[3] = - vc->vc_tab_stop[4] = 0; + vc->vc_tab_stop[4] = + vc->vc_tab_stop[5] = + vc->vc_tab_stop[6] = + vc->vc_tab_stop[7] = 0; } return; case 'm': -- cgit v1.2.3 From 9e3a4afd5a66f9047e30ba225525e6ff01612dc4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 6 Nov 2008 12:53:18 -0800 Subject: rtc: fix handling of missing tm_year data when reading alarms When fixing up invalid years rtc_read_alarm() was calling rtc_valid_tm() as a boolean but rtc_valid_tm() returns zero on success or a negative number if the time is not valid so the test was inverted. Signed-off-by: Mark Brown Acked-by: Alessandro Zummo Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/interface.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 7af60b98d8a4..a04c1b6b1575 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -271,7 +271,7 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year"); do { alarm->time.tm_year++; - } while (!rtc_valid_tm(&alarm->time)); + } while (rtc_valid_tm(&alarm->time) != 0); break; default: -- cgit v1.2.3 From 6e3530fa241ae759313496f67295c9252691ed04 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 6 Nov 2008 12:53:19 -0800 Subject: hwmon: applesmc: add support for iMac 5 Add temperature sensor support for iMac 5. Signed-off-by: Henrik Rydberg Tested-by: Ricky Campbell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index bc011da79e14..80d545d3aa12 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -116,6 +116,8 @@ static const char* temperature_sensors_sets[][36] = { /* Set 9: Macbook Pro 3,1 (Santa Rosa) */ { "TALP", "TB0T", "TC0D", "TC0P", "TG0D", "TG0H", "TTF0", "TW0P", "Th0H", "Th1H", "Th2H", "Tm0P", "Ts0P", NULL }, +/* Set 10: iMac 5,1 */ + { "TA0P", "TC0D", "TC0P", "TG0D", "TH0P", "TO0P", "Tm0P", NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1276,6 +1278,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 1, .light = 1, .temperature_set = 8 }, /* MacBook Pro 3: accelerometer, backlight and temperature set 9 */ { .accelerometer = 1, .light = 1, .temperature_set = 9 }, +/* iMac 5: light sensor only, temperature set 10 */ + { .accelerometer = 0, .light = 0, .temperature_set = 10 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1317,6 +1321,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, &applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple iMac 5", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") }, + &applesmc_dmi_data[10]}, { applesmc_dmi_match, "Apple iMac", { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"iMac") }, -- cgit v1.2.3 From 181209a1d91756bfd83b1d6ce2008cea3ca225b6 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 6 Nov 2008 12:53:20 -0800 Subject: hwmon: applesmc: add support for Macbook 5 Add accelerometer, backlight and temperature sensor support for the new unibody Macbook 5. Signed-off-by: Henrik Rydberg Tested-by: David M. Lary Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 80d545d3aa12..074f7f4719f3 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -118,6 +118,9 @@ static const char* temperature_sensors_sets[][36] = { "Th0H", "Th1H", "Th2H", "Tm0P", "Ts0P", NULL }, /* Set 10: iMac 5,1 */ { "TA0P", "TC0D", "TC0P", "TG0D", "TH0P", "TO0P", "Tm0P", NULL }, +/* Set 11: Macbook 5,1 */ + { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0P", "TN0D", "TN0P", + "TTF0", "Th0H", "Th1H", "ThFH", "Ts0P", "Ts0S", NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1280,6 +1283,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 1, .light = 1, .temperature_set = 9 }, /* iMac 5: light sensor only, temperature set 10 */ { .accelerometer = 0, .light = 0, .temperature_set = 10 }, +/* MacBook 5: accelerometer, backlight and temperature set 11 */ + { .accelerometer = 1, .light = 1, .temperature_set = 11 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1309,6 +1314,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") }, &applesmc_dmi_data[6]}, + { applesmc_dmi_match, "Apple MacBook 5", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") }, + &applesmc_dmi_data[11]}, { applesmc_dmi_match, "Apple MacBook", { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") }, -- cgit v1.2.3 From a66603257bf88bbe2c9fd6a97ee5dc24de15d196 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 6 Nov 2008 12:53:21 -0800 Subject: hwmon: applesmc: add support for Macbook Pro 5 Add accelerometer, backlight and temperature sensor support for the new unibody Macbook Pro 5. Signed-off-by: Henrik Rydberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 074f7f4719f3..9f04283beaee 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -121,6 +121,10 @@ static const char* temperature_sensors_sets[][36] = { /* Set 11: Macbook 5,1 */ { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0P", "TN0D", "TN0P", "TTF0", "Th0H", "Th1H", "ThFH", "Ts0P", "Ts0S", NULL }, +/* Set 12: Macbook Pro 5,1 */ + { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TG0D", + "TG0F", "TG0H", "TG0P", "TG0T", "TG1H", "TN0D", "TN0P", "TTF0", + "Th2H", "Tm0P", "Ts0P", "Ts0S", NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1285,6 +1289,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 10 }, /* MacBook 5: accelerometer, backlight and temperature set 11 */ { .accelerometer = 1, .light = 1, .temperature_set = 11 }, +/* MacBook Pro 5: accelerometer, backlight and temperature set 12 */ + { .accelerometer = 1, .light = 1, .temperature_set = 12 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1294,6 +1300,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir") }, &applesmc_dmi_data[7]}, + { applesmc_dmi_match, "Apple MacBook Pro 5", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5") }, + &applesmc_dmi_data[12]}, { applesmc_dmi_match, "Apple MacBook Pro 4", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro4") }, -- cgit v1.2.3 From eefc488f96cdde6e152b45675b50bf380b95d99f Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 6 Nov 2008 12:53:22 -0800 Subject: hwmon: applesmc: add support for iMac 8 Add temperature sensor support for iMac 8. Signed-off-by: Henrik Rydberg Tested-by: Klaus Doblmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 9f04283beaee..be3285912cb7 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -125,6 +125,9 @@ static const char* temperature_sensors_sets[][36] = { { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TG0D", "TG0F", "TG0H", "TG0P", "TG0T", "TG1H", "TN0D", "TN0P", "TTF0", "Th2H", "Tm0P", "Ts0P", "Ts0S", NULL }, +/* Set 13: iMac 8,1 */ + { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P", + "TL0P", "TO0P", "TW0P", "Tm0P", "Tp0P", NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1291,6 +1294,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 1, .light = 1, .temperature_set = 11 }, /* MacBook Pro 5: accelerometer, backlight and temperature set 12 */ { .accelerometer = 1, .light = 1, .temperature_set = 12 }, +/* iMac 8: light sensor only, temperature set 13 */ + { .accelerometer = 0, .light = 0, .temperature_set = 13 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1340,6 +1345,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, &applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple iMac 8", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") }, + &applesmc_dmi_data[13]}, { applesmc_dmi_match, "Apple iMac 5", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") }, -- cgit v1.2.3 From bc9c4068388eea01d3b5da31016879f2341ecec5 Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Thu, 6 Nov 2008 12:53:22 -0800 Subject: autofs4: correct offset mount expire check When checking a directory tree in autofs_tree_busy() we can incorrectly decide that the tree isn't busy. This happens for the case of an active offset mount as autofs4_follow_mount() follows past the active offset mount, which has an open file handle used for expires, causing the file handle not to count toward the busyness check. Signed-off-by: Ian Kent Signed-off-by: Jeff Moyer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/autofs4/expire.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c index cde2f8e8935a..4b6fb3f628c0 100644 --- a/fs/autofs4/expire.c +++ b/fs/autofs4/expire.c @@ -56,12 +56,23 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry) mntget(mnt); dget(dentry); - if (!autofs4_follow_mount(&mnt, &dentry)) + if (!follow_down(&mnt, &dentry)) goto done; - /* This is an autofs submount, we can't expire it */ - if (is_autofs4_dentry(dentry)) - goto done; + if (is_autofs4_dentry(dentry)) { + struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb); + + /* This is an autofs submount, we can't expire it */ + if (sbi->type == AUTOFS_TYPE_INDIRECT) + goto done; + + /* + * Otherwise it's an offset mount and we need to check + * if we can umount its mount, if there is one. + */ + if (!d_mountpoint(dentry)) + goto done; + } /* Update the expiry counter if fs is busy */ if (!may_umount_tree(mnt)) { -- cgit v1.2.3 From 96b0317906690997c16c7efffbc4c0fafcd6f7f2 Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Thu, 6 Nov 2008 12:53:23 -0800 Subject: autofs4: collect version check return The function check_dev_ioctl_version() returns an error code upon fail but it isn't captured and returned in validate_dev_ioctl() as it should be. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Ian Kent Signed-off-by: Jeff Moyer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/autofs4/dev-ioctl.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index 625abf5422e2..33bf8cbfd051 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -128,9 +128,10 @@ static inline void free_dev_ioctl(struct autofs_dev_ioctl *param) */ static int validate_dev_ioctl(int cmd, struct autofs_dev_ioctl *param) { - int err = -EINVAL; + int err; - if (check_dev_ioctl_version(cmd, param)) { + err = check_dev_ioctl_version(cmd, param); + if (err) { AUTOFS_WARN("invalid device control module version " "supplied for cmd(0x%08x)", cmd); goto out; -- cgit v1.2.3 From 404443081ce5e6f68b5f7eda16c959835ff200c0 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Thu, 6 Nov 2008 12:53:24 -0800 Subject: cciss: fix sysfs broken symlink regression Regression introduced by commit 6ae5ce8e8d4de666f31286808d2285aa6a50fa40 ("cciss: remove redundant code"). This patch fixes a broken symlink in sysfs that was introduced by the above commit. We broke it in 2.6.27-rc on or about 20080804. Some installers are broken if this symlink does not exist and they may not detect the logical drives configured on the controller. It does not require being backported into 2.6.26.x or earlier kernels. Signed-off-by: Mike Miller Cc: Jens Axboe Cc: [2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 00048bd26e7d..dc38368435aa 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1370,6 +1370,7 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, disk->first_minor = drv_index << NWD_SHIFT; disk->fops = &cciss_fops; disk->private_data = &h->drv[drv_index]; + disk->driverfs_dev = &h->pdev->dev; /* Set up queue information */ blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask); -- cgit v1.2.3 From 22bece00dc1f28dd3374c55e464c9f02eb642876 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Thu, 6 Nov 2008 12:53:25 -0800 Subject: cciss: fix regression firmware not displayed in procfs This regression was introduced by commit 6ae5ce8e8d4de666f31286808d2285aa6a50fa40 ("cciss: remove redundant code"). This patch fixes a regression where the controller firmware version is not displayed in procfs. The previous patch would be called anytime something changed. This will get called only once for each controller. Signed-off-by: Mike Miller Cc: FUJITA Tomonori Cc: Jens Axboe Cc: [2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index dc38368435aa..12de1fdaa6c6 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3409,7 +3409,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, int i; int j = 0; int rc; - int dac; + int dac, return_code; + InquiryData_struct *inq_buff = NULL; i = alloc_cciss_hba(); if (i < 0) @@ -3515,6 +3516,25 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, /* Turn the interrupts on so we can service requests */ hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON); + /* Get the firmware version */ + inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL); + if (inq_buff == NULL) { + printk(KERN_ERR "cciss: out of memory\n"); + goto clean4; + } + + return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff, + sizeof(InquiryData_struct), 0, 0 , 0, TYPE_CMD); + if (return_code == IO_OK) { + hba[i]->firm_ver[0] = inq_buff->data_byte[32]; + hba[i]->firm_ver[1] = inq_buff->data_byte[33]; + hba[i]->firm_ver[2] = inq_buff->data_byte[34]; + hba[i]->firm_ver[3] = inq_buff->data_byte[35]; + } else { /* send command failed */ + printk(KERN_WARNING "cciss: unable to determine firmware" + " version of controller\n"); + } + cciss_procinit(i); hba[i]->cciss_max_sectors = 2048; @@ -3525,6 +3545,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, return 1; clean4: + kfree(inq_buff); #ifdef CONFIG_CISS_SCSI_TAPE kfree(hba[i]->scsi_rejects.complete); #endif -- cgit v1.2.3 From 69d177c2fc702d402b17fdca2190d5a7e3ca55c5 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 6 Nov 2008 12:53:26 -0800 Subject: hugetlbfs: handle pages higher order than MAX_ORDER When working with hugepages, hugetlbfs assumes that those hugepages are smaller than MAX_ORDER. Specifically it assumes that the mem_map is contigious and uses that to optimise access to the elements of the mem_map that represent the hugepage. Gigantic pages (such as 16GB pages on powerpc) by definition are of greater order than MAX_ORDER (larger than MAX_ORDER_NR_PAGES in size). This means that we can no longer make use of the buddy alloctor guarentees for the contiguity of the mem_map, which ensures that the mem_map is at least contigious for maximmally aligned areas of MAX_ORDER_NR_PAGES pages. This patch adds new mem_map accessors and iterator helpers which handle any discontiguity at MAX_ORDER_NR_PAGES boundaries. It then uses these to implement gigantic page versions of copy_huge_page and clear_huge_page, and to allow follow_hugetlb_page handle gigantic pages. Signed-off-by: Andy Whitcroft Cc: Jon Tollefson Cc: Mel Gorman Cc: Nick Piggin Cc: Christoph Lameter Cc: [2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 37 ++++++++++++++++++++++++++++++++++++- mm/internal.h | 28 ++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 421aee99b84a..e6afe527bd09 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -354,11 +354,26 @@ static int vma_has_reserves(struct vm_area_struct *vma) return 0; } +static void clear_gigantic_page(struct page *page, + unsigned long addr, unsigned long sz) +{ + int i; + struct page *p = page; + + might_sleep(); + for (i = 0; i < sz/PAGE_SIZE; i++, p = mem_map_next(p, page, i)) { + cond_resched(); + clear_user_highpage(p, addr + i * PAGE_SIZE); + } +} static void clear_huge_page(struct page *page, unsigned long addr, unsigned long sz) { int i; + if (unlikely(sz > MAX_ORDER_NR_PAGES)) + return clear_gigantic_page(page, addr, sz); + might_sleep(); for (i = 0; i < sz/PAGE_SIZE; i++) { cond_resched(); @@ -366,12 +381,32 @@ static void clear_huge_page(struct page *page, } } +static void copy_gigantic_page(struct page *dst, struct page *src, + unsigned long addr, struct vm_area_struct *vma) +{ + int i; + struct hstate *h = hstate_vma(vma); + struct page *dst_base = dst; + struct page *src_base = src; + might_sleep(); + for (i = 0; i < pages_per_huge_page(h); ) { + cond_resched(); + copy_user_highpage(dst, src, addr + i*PAGE_SIZE, vma); + + i++; + dst = mem_map_next(dst, dst_base, i); + src = mem_map_next(src, src_base, i); + } +} static void copy_huge_page(struct page *dst, struct page *src, unsigned long addr, struct vm_area_struct *vma) { int i; struct hstate *h = hstate_vma(vma); + if (unlikely(pages_per_huge_page(h) > MAX_ORDER_NR_PAGES)) + return copy_gigantic_page(dst, src, addr, vma); + might_sleep(); for (i = 0; i < pages_per_huge_page(h); i++) { cond_resched(); @@ -2130,7 +2165,7 @@ same_page: if (zeropage_ok) pages[i] = ZERO_PAGE(0); else - pages[i] = page + pfn_offset; + pages[i] = mem_map_offset(page, pfn_offset); get_page(pages[i]); } diff --git a/mm/internal.h b/mm/internal.h index e4e728bdf324..f482460de3e6 100644 --- a/mm/internal.h +++ b/mm/internal.h @@ -175,6 +175,34 @@ static inline void free_page_mlock(struct page *page) { } #endif /* CONFIG_UNEVICTABLE_LRU */ +/* + * Return the mem_map entry representing the 'offset' subpage within + * the maximally aligned gigantic page 'base'. Handle any discontiguity + * in the mem_map at MAX_ORDER_NR_PAGES boundaries. + */ +static inline struct page *mem_map_offset(struct page *base, int offset) +{ + if (unlikely(offset >= MAX_ORDER_NR_PAGES)) + return pfn_to_page(page_to_pfn(base) + offset); + return base + offset; +} + +/* + * Iterator over all subpages withing the maximally aligned gigantic + * page 'base'. Handle any discontiguity in the mem_map. + */ +static inline struct page *mem_map_next(struct page *iter, + struct page *base, int offset) +{ + if (unlikely((offset & (MAX_ORDER_NR_PAGES - 1)) == 0)) { + unsigned long pfn = page_to_pfn(base) + offset; + if (!pfn_valid(pfn)) + return NULL; + return pfn_to_page(pfn); + } + return iter + 1; +} + /* * FLATMEM and DISCONTIGMEM configurations use alloc_bootmem_node, * so all functions starting at paging_init should be marked __init -- cgit v1.2.3 From 18229df5b613ed0732a766fc37850de2e7988e43 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 6 Nov 2008 12:53:27 -0800 Subject: hugetlb: pull gigantic page initialisation out of the default path As we can determine exactly when a gigantic page is in use we can optimise the common regular page cases by pulling out gigantic page initialisation into its own function. As gigantic pages are never released to buddy we do not need a destructor. This effectivly reverts the previous change to the main buddy allocator. It also adds a paranoid check to ensure we never release gigantic pages from hugetlbfs to the main buddy. Signed-off-by: Andy Whitcroft Cc: Jon Tollefson Cc: Mel Gorman Cc: Nick Piggin Cc: Christoph Lameter Cc: [2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 12 +++++++++++- mm/internal.h | 1 + mm/page_alloc.c | 28 +++++++++++++++++++++------- 3 files changed, 33 insertions(+), 8 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index e6afe527bd09..d143ab67be44 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -491,6 +491,8 @@ static void update_and_free_page(struct hstate *h, struct page *page) { int i; + VM_BUG_ON(h->order >= MAX_ORDER); + h->nr_huge_pages--; h->nr_huge_pages_node[page_to_nid(page)]--; for (i = 0; i < pages_per_huge_page(h); i++) { @@ -1005,6 +1007,14 @@ found: return 1; } +static void prep_compound_huge_page(struct page *page, int order) +{ + if (unlikely(order > (MAX_ORDER - 1))) + prep_compound_gigantic_page(page, order); + else + prep_compound_page(page, order); +} + /* Put bootmem huge pages into the standard lists after mem_map is up */ static void __init gather_bootmem_prealloc(void) { @@ -1015,7 +1025,7 @@ static void __init gather_bootmem_prealloc(void) struct hstate *h = m->hstate; __ClearPageReserved(page); WARN_ON(page_count(page) != 1); - prep_compound_page(page, h->order); + prep_compound_huge_page(page, h->order); prep_new_huge_page(h, page, page_to_nid(page)); } } diff --git a/mm/internal.h b/mm/internal.h index f482460de3e6..13333bc2eb68 100644 --- a/mm/internal.h +++ b/mm/internal.h @@ -17,6 +17,7 @@ void free_pgtables(struct mmu_gather *tlb, struct vm_area_struct *start_vma, unsigned long floor, unsigned long ceiling); extern void prep_compound_page(struct page *page, unsigned long order); +extern void prep_compound_gigantic_page(struct page *page, unsigned long order); static inline void set_page_count(struct page *page, int v) { diff --git a/mm/page_alloc.c b/mm/page_alloc.c index d0a240fbb8bf..54069e64e3a8 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -260,6 +260,23 @@ static void free_compound_page(struct page *page) } void prep_compound_page(struct page *page, unsigned long order) +{ + int i; + int nr_pages = 1 << order; + + set_compound_page_dtor(page, free_compound_page); + set_compound_order(page, order); + __SetPageHead(page); + for (i = 1; i < nr_pages; i++) { + struct page *p = page + i; + + __SetPageTail(p); + p->first_page = page; + } +} + +#ifdef CONFIG_HUGETLBFS +void prep_compound_gigantic_page(struct page *page, unsigned long order) { int i; int nr_pages = 1 << order; @@ -268,19 +285,17 @@ void prep_compound_page(struct page *page, unsigned long order) set_compound_page_dtor(page, free_compound_page); set_compound_order(page, order); __SetPageHead(page); - for (i = 1; i < nr_pages; i++, p++) { - if (unlikely((i & (MAX_ORDER_NR_PAGES - 1)) == 0)) - p = pfn_to_page(page_to_pfn(page) + i); + for (i = 1; i < nr_pages; i++, p = mem_map_next(p, page, i)) { __SetPageTail(p); p->first_page = page; } } +#endif static void destroy_compound_page(struct page *page, unsigned long order) { int i; int nr_pages = 1 << order; - struct page *p = page + 1; if (unlikely(compound_order(page) != order)) bad_page(page); @@ -288,9 +303,8 @@ static void destroy_compound_page(struct page *page, unsigned long order) if (unlikely(!PageHead(page))) bad_page(page); __ClearPageHead(page); - for (i = 1; i < nr_pages; i++, p++) { - if (unlikely((i & (MAX_ORDER_NR_PAGES - 1)) == 0)) - p = pfn_to_page(page_to_pfn(page) + i); + for (i = 1; i < nr_pages; i++) { + struct page *p = page + i; if (unlikely(!PageTail(p) | (p->first_page != page))) -- cgit v1.2.3 From 953a64798d82ee5467da2bdc0e467ef874fbc208 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 6 Nov 2008 12:53:28 -0800 Subject: MAINTAINERS: make IOAT easier to find Searching MAINTAINERS for "ioat" comes up empty. Fix this. Cc: "Dan Williams" Cc: "Sosnowski, Maciej" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index d643e862b8e4..7e6a17e1de09 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -721,7 +721,7 @@ W: http://sourceforge.net/projects/acpi4asus W: http://xf.iksaif.net/acpi4asus S: Maintained -ASYNCHRONOUS TRANSFERS/TRANSFORMS API +ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API P: Dan Williams M: dan.j.williams@intel.com P: Maciej Sosnowski -- cgit v1.2.3 From b4416d2bea007f07f2e74cdc4cb64042ec996c83 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 6 Nov 2008 12:53:29 -0800 Subject: oom: do not dump task state for non thread group leaders When /proc/sys/vm/oom_dump_tasks is enabled, it's only necessary to dump task state information for thread group leaders. The kernel log gets quickly overwhelmed on machines with a massive number of threads by dumping non-thread group leaders. Reviewed-by: Christoph Lameter Signed-off-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/oom_kill.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 64e5b4bcd964..2846a58e5de9 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -295,6 +295,8 @@ static void dump_tasks(const struct mem_cgroup *mem) continue; if (mem && !task_in_mem_cgroup(p, mem)) continue; + if (!thread_group_leader(p)) + continue; task_lock(p); printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n", -- cgit v1.2.3 From 17a1217e12d8c8434f8a3deef7bf980c724a6ac7 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 6 Nov 2008 12:53:29 -0800 Subject: fbdev: add new framebuffer driver for Fujitsu MB862xx GDCs Add a framebuffer driver for the Fujitsu Carmine/Coral-P(A)/Lime graphics controllers. Lime GDC support is known to work on PPC440EPx based lwmon5 and MPC8544E based socrates embedded boards, both equipped with Lime GDC. Carmine/Coral-P PCI GDC support is known to work on PPC440EPx based Sequoia board and also on x86 platform. Signed-off-by: Anatolij Gustschin Cc: Dmitry Baryshkov Cc: Anton Vorontsov Cc: Matteo Fortini Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 32 ++ drivers/video/Makefile | 1 + drivers/video/mb862xx/Makefile | 5 + drivers/video/mb862xx/mb862xx_reg.h | 138 +++++ drivers/video/mb862xx/mb862xxfb.c | 1061 +++++++++++++++++++++++++++++++++++ drivers/video/mb862xx/mb862xxfb.h | 83 +++ 6 files changed, 1320 insertions(+) create mode 100644 drivers/video/mb862xx/Makefile create mode 100644 drivers/video/mb862xx/mb862xx_reg.h create mode 100644 drivers/video/mb862xx/mb862xxfb.c create mode 100644 drivers/video/mb862xx/mb862xxfb.h diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 0f13448c6f79..3f3ce13fef43 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2083,6 +2083,38 @@ config FB_METRONOME controller. The pre-release name for this device was 8track and could also have been called by some vendors as PVI-nnnn. +config FB_MB862XX + tristate "Fujitsu MB862xx GDC support" + depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers. + +config FB_MB862XX_PCI_GDC + bool "Carmine/Coral-P(A) GDC" + depends on PCI && FB_MB862XX + ---help--- + This enables framebuffer support for Fujitsu Carmine/Coral-P(A) + PCI graphics controller devices. + +config FB_MB862XX_LIME + bool "Lime GDC" + depends on FB_MB862XX + depends on OF && !FB_MB862XX_PCI_GDC + select FB_FOREIGN_ENDIAN + select FB_LITTLE_ENDIAN + ---help--- + Framebuffer support for Fujitsu Lime GDC on host CPU bus. + +config FB_PRE_INIT_FB + bool "Don't reinitialize, use bootloader's GDC/Display configuration" + depends on FB_MB862XX_LIME + ---help--- + Select this option if display contents should be inherited as set by + the bootloader. + source "drivers/video/omap/Kconfig" source "drivers/video/backlight/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 248bddc8d0b0..e39e33e797da 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -122,6 +122,7 @@ obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o obj-$(CONFIG_FB_OMAP) += omap/ obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o obj-$(CONFIG_FB_CARMINE) += carminefb.o +obj-$(CONFIG_FB_MB862XX) += mb862xx/ # Platform or fallback drivers go here obj-$(CONFIG_FB_UVESA) += uvesafb.o diff --git a/drivers/video/mb862xx/Makefile b/drivers/video/mb862xx/Makefile new file mode 100644 index 000000000000..07664814bb1d --- /dev/null +++ b/drivers/video/mb862xx/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the MB862xx framebuffer driver +# + +obj-$(CONFIG_FB_MB862XX) := mb862xxfb.o diff --git a/drivers/video/mb862xx/mb862xx_reg.h b/drivers/video/mb862xx/mb862xx_reg.h new file mode 100644 index 000000000000..2ba65e118500 --- /dev/null +++ b/drivers/video/mb862xx/mb862xx_reg.h @@ -0,0 +1,138 @@ +/* + * Fujitsu MB862xx Graphics Controller Registers/Bits + */ + +#ifndef _MB862XX_REG_H +#define _MB862XX_REG_H + +#ifdef MB862XX_MMIO_BOTTOM +#define MB862XX_MMIO_BASE 0x03fc0000 +#else +#define MB862XX_MMIO_BASE 0x01fc0000 +#endif +#define MB862XX_I2C_BASE 0x0000c000 +#define MB862XX_DISP_BASE 0x00010000 +#define MB862XX_CAP_BASE 0x00018000 +#define MB862XX_DRAW_BASE 0x00030000 +#define MB862XX_GEO_BASE 0x00038000 +#define MB862XX_PIO_BASE 0x00038000 +#define MB862XX_MMIO_SIZE 0x40000 + +/* Host interface/pio registers */ +#define GC_IST 0x00000020 +#define GC_IMASK 0x00000024 +#define GC_SRST 0x0000002c +#define GC_CCF 0x00000038 +#define GC_CID 0x000000f0 +#define GC_REVISION 0x00000084 + +#define GC_CCF_CGE_100 0x00000000 +#define GC_CCF_CGE_133 0x00040000 +#define GC_CCF_CGE_166 0x00080000 +#define GC_CCF_COT_100 0x00000000 +#define GC_CCF_COT_133 0x00010000 +#define GC_CID_CNAME_MSK 0x0000ff00 +#define GC_CID_VERSION_MSK 0x000000ff + +/* define enabled interrupts hereby */ +#define GC_INT_EN 0x00000000 + +/* Memory interface mode register */ +#define GC_MMR 0x0000fffc + +/* Display Controller registers */ +#define GC_DCM0 0x00000000 +#define GC_HTP 0x00000004 +#define GC_HDB_HDP 0x00000008 +#define GC_VSW_HSW_HSP 0x0000000c +#define GC_VTR 0x00000010 +#define GC_VDP_VSP 0x00000014 +#define GC_WY_WX 0x00000018 +#define GC_WH_WW 0x0000001c +#define GC_L0M 0x00000020 +#define GC_L0OA0 0x00000024 +#define GC_L0DA0 0x00000028 +#define GC_L0DY_L0DX 0x0000002c +#define GC_DCM1 0x00000100 +#define GC_L0EM 0x00000110 +#define GC_L0WY_L0WX 0x00000114 +#define GC_L0WH_L0WW 0x00000118 +#define GC_DCM2 0x00000104 +#define GC_DCM3 0x00000108 +#define GC_CPM_CUTC 0x000000a0 +#define GC_CUOA0 0x000000a4 +#define GC_CUY0_CUX0 0x000000a8 +#define GC_CUOA1 0x000000ac +#define GC_CUY1_CUX1 0x000000b0 +#define GC_L0PAL0 0x00000400 + +#define GC_CPM_CEN0 0x00100000 +#define GC_CPM_CEN1 0x00200000 + +#define GC_DCM01_ESY 0x00000004 +#define GC_DCM01_SC 0x00003f00 +#define GC_DCM01_RESV 0x00004000 +#define GC_DCM01_CKS 0x00008000 +#define GC_DCM01_L0E 0x00010000 +#define GC_DCM01_DEN 0x80000000 +#define GC_L0M_L0C_8 0x00000000 +#define GC_L0M_L0C_16 0x80000000 +#define GC_L0EM_L0EC_24 0x40000000 +#define GC_L0M_L0W_UNIT 64 + +#define GC_DISP_REFCLK_400 400 + +/* Carmine specific */ +#define MB86297_DRAW_BASE 0x00020000 +#define MB86297_DISP0_BASE 0x00100000 +#define MB86297_DISP1_BASE 0x00140000 +#define MB86297_WRBACK_BASE 0x00180000 +#define MB86297_CAP0_BASE 0x00200000 +#define MB86297_CAP1_BASE 0x00280000 +#define MB86297_DRAMCTRL_BASE 0x00300000 +#define MB86297_CTRL_BASE 0x00400000 +#define MB86297_I2C_BASE 0x00500000 + +#define GC_CTRL_STATUS 0x00000000 +#define GC_CTRL_INT_MASK 0x00000004 +#define GC_CTRL_CLK_ENABLE 0x0000000c +#define GC_CTRL_SOFT_RST 0x00000010 + +#define GC_CTRL_CLK_EN_DRAM 0x00000001 +#define GC_CTRL_CLK_EN_2D3D 0x00000002 +#define GC_CTRL_CLK_EN_DISP0 0x00000020 +#define GC_CTRL_CLK_EN_DISP1 0x00000040 + +#define GC_2D3D_REV 0x000004b4 +#define GC_RE_REVISION 0x24240200 + +/* define enabled interrupts hereby */ +#define GC_CARMINE_INT_EN 0x00000004 + +/* DRAM controller */ +#define GC_DCTL_MODE_ADD 0x00000000 +#define GC_DCTL_SETTIME1_EMODE 0x00000004 +#define GC_DCTL_REFRESH_SETTIME2 0x00000008 +#define GC_DCTL_RSV0_STATES 0x0000000C +#define GC_DCTL_RSV2_RSV1 0x00000010 +#define GC_DCTL_DDRIF2_DDRIF1 0x00000014 +#define GC_DCTL_IOCONT1_IOCONT0 0x00000024 + +#define GC_DCTL_STATES_MSK 0x0000000f +#define GC_DCTL_INIT_WAIT_CNT 3000 +#define GC_DCTL_INIT_WAIT_INTERVAL 1 + +/* DRAM ctrl values for Carmine PCI Eval. board */ +#define GC_EVB_DCTL_MODE_ADD 0x012105c3 +#define GC_EVB_DCTL_MODE_ADD_AFT_RST 0x002105c3 +#define GC_EVB_DCTL_SETTIME1_EMODE 0x47498000 +#define GC_EVB_DCTL_REFRESH_SETTIME2 0x00422a22 +#define GC_EVB_DCTL_RSV0_STATES 0x00200003 +#define GC_EVB_DCTL_RSV0_STATES_AFT_RST 0x00200002 +#define GC_EVB_DCTL_RSV2_RSV1 0x0000000f +#define GC_EVB_DCTL_DDRIF2_DDRIF1 0x00556646 +#define GC_EVB_DCTL_IOCONT1_IOCONT0 0x05550555 + +#define GC_DISP_REFCLK_533 533 + +#endif diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c new file mode 100644 index 000000000000..38718d95fbb9 --- /dev/null +++ b/drivers/video/mb862xx/mb862xxfb.c @@ -0,0 +1,1061 @@ +/* + * drivers/mb862xx/mb862xxfb.c + * + * Fujitsu Carmine/Coral-P(A)/Lime framebuffer driver + * + * (C) 2008 Anatolij Gustschin + * DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#if defined(CONFIG_PPC_OF) +#include +#endif +#include "mb862xxfb.h" +#include "mb862xx_reg.h" + +#define NR_PALETTE 256 +#define MB862XX_MEM_SIZE 0x1000000 +#define CORALP_MEM_SIZE 0x4000000 +#define CARMINE_MEM_SIZE 0x8000000 +#define DRV_NAME "mb862xxfb" + +#if defined(CONFIG_LWMON5) +static struct mb862xx_gc_mode lwmon5_gc_mode = { + /* Mode for Sharp LQ104V1DG61 TFT LCD Panel */ + { "640x480", 60, 640, 480, 40000, 48, 16, 32, 11, 96, 2, 0, 0, 0 }, + /* 16 bits/pixel, 32MB, 100MHz, SDRAM memory mode value */ + 16, 0x2000000, GC_CCF_COT_100, 0x414fb7f2 +}; +#endif + +#if defined(CONFIG_SOCRATES) +static struct mb862xx_gc_mode socrates_gc_mode = { + /* Mode for Prime View PM070WL4 TFT LCD Panel */ + { "800x480", 45, 800, 480, 40000, 86, 42, 33, 10, 128, 2, 0, 0, 0 }, + /* 16 bits/pixel, 16MB, 133MHz, SDRAM memory mode value */ + 16, 0x1000000, GC_CCF_COT_133, 0x4157ba63 +}; +#endif + +/* Helpers */ +static inline int h_total(struct fb_var_screeninfo *var) +{ + return var->xres + var->left_margin + + var->right_margin + var->hsync_len; +} + +static inline int v_total(struct fb_var_screeninfo *var) +{ + return var->yres + var->upper_margin + + var->lower_margin + var->vsync_len; +} + +static inline int hsp(struct fb_var_screeninfo *var) +{ + return var->xres + var->right_margin - 1; +} + +static inline int vsp(struct fb_var_screeninfo *var) +{ + return var->yres + var->lower_margin - 1; +} + +static inline int d_pitch(struct fb_var_screeninfo *var) +{ + return var->xres * var->bits_per_pixel / 8; +} + +static inline unsigned int chan_to_field(unsigned int chan, + struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int mb862xxfb_setcolreg(unsigned regno, + unsigned red, unsigned green, unsigned blue, + unsigned transp, struct fb_info *info) +{ + struct mb862xxfb_par *par = info->par; + unsigned int val; + + switch (info->fix.visual) { + case FB_VISUAL_TRUECOLOR: + if (regno < 16) { + val = chan_to_field(red, &info->var.red); + val |= chan_to_field(green, &info->var.green); + val |= chan_to_field(blue, &info->var.blue); + par->pseudo_palette[regno] = val; + } + break; + case FB_VISUAL_PSEUDOCOLOR: + if (regno < 256) { + val = (red >> 8) << 16; + val |= (green >> 8) << 8; + val |= blue >> 8; + outreg(disp, GC_L0PAL0 + (regno * 4), val); + } + break; + default: + return 1; /* unsupported type */ + } + return 0; +} + +static int mb862xxfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *fbi) +{ + unsigned long tmp; + + if (fbi->dev) + dev_dbg(fbi->dev, "%s\n", __func__); + + /* check if these values fit into the registers */ + if (var->hsync_len > 255 || var->vsync_len > 255) + return -EINVAL; + + if ((var->xres + var->right_margin) >= 4096) + return -EINVAL; + + if ((var->yres + var->lower_margin) > 4096) + return -EINVAL; + + if (h_total(var) > 4096 || v_total(var) > 4096) + return -EINVAL; + + if (var->xres_virtual > 4096 || var->yres_virtual > 4096) + return -EINVAL; + + if (var->bits_per_pixel <= 8) + var->bits_per_pixel = 8; + else if (var->bits_per_pixel <= 16) + var->bits_per_pixel = 16; + else if (var->bits_per_pixel <= 32) + var->bits_per_pixel = 32; + + /* + * can cope with 8,16 or 24/32bpp if resulting + * pitch is divisible by 64 without remainder + */ + if (d_pitch(&fbi->var) % GC_L0M_L0W_UNIT) { + int r; + + var->bits_per_pixel = 0; + do { + var->bits_per_pixel += 8; + r = d_pitch(&fbi->var) % GC_L0M_L0W_UNIT; + } while (r && var->bits_per_pixel <= 32); + + if (d_pitch(&fbi->var) % GC_L0M_L0W_UNIT) + return -EINVAL; + } + + /* line length is going to be 128 bit aligned */ + tmp = (var->xres * var->bits_per_pixel) / 8; + if ((tmp & 15) != 0) + return -EINVAL; + + /* set r/g/b positions and validate bpp */ + switch (var->bits_per_pixel) { + case 8: + var->red.length = var->bits_per_pixel; + var->green.length = var->bits_per_pixel; + var->blue.length = var->bits_per_pixel; + var->red.offset = 0; + var->green.offset = 0; + var->blue.offset = 0; + var->transp.length = 0; + break; + case 16: + var->red.length = 5; + var->green.length = 5; + var->blue.length = 5; + var->red.offset = 10; + var->green.offset = 5; + var->blue.offset = 0; + var->transp.length = 0; + break; + case 24: + case 32: + var->transp.length = 8; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.offset = 24; + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * set display parameters + */ +static int mb862xxfb_set_par(struct fb_info *fbi) +{ + struct mb862xxfb_par *par = fbi->par; + unsigned long reg, sc; + + dev_dbg(par->dev, "%s\n", __func__); + + if (par->pre_init) + return 0; + + /* disp off */ + reg = inreg(disp, GC_DCM1); + reg &= ~GC_DCM01_DEN; + outreg(disp, GC_DCM1, reg); + + /* set display reference clock div. */ + sc = par->refclk / (1000000 / fbi->var.pixclock) - 1; + reg = inreg(disp, GC_DCM1); + reg &= ~(GC_DCM01_CKS | GC_DCM01_RESV | GC_DCM01_SC); + reg |= sc << 8; + outreg(disp, GC_DCM1, reg); + dev_dbg(par->dev, "SC 0x%lx\n", sc); + + /* disp dimension, format */ + reg = pack(d_pitch(&fbi->var) / GC_L0M_L0W_UNIT, + (fbi->var.yres - 1)); + if (fbi->var.bits_per_pixel == 16) + reg |= GC_L0M_L0C_16; + outreg(disp, GC_L0M, reg); + + if (fbi->var.bits_per_pixel == 32) { + reg = inreg(disp, GC_L0EM); + outreg(disp, GC_L0EM, reg | GC_L0EM_L0EC_24); + } + outreg(disp, GC_WY_WX, 0); + reg = pack(fbi->var.yres - 1, fbi->var.xres); + outreg(disp, GC_WH_WW, reg); + outreg(disp, GC_L0OA0, 0); + outreg(disp, GC_L0DA0, 0); + outreg(disp, GC_L0DY_L0DX, 0); + outreg(disp, GC_L0WY_L0WX, 0); + outreg(disp, GC_L0WH_L0WW, reg); + + /* both HW-cursors off */ + reg = inreg(disp, GC_CPM_CUTC); + reg &= ~(GC_CPM_CEN0 | GC_CPM_CEN1); + outreg(disp, GC_CPM_CUTC, reg); + + /* timings */ + reg = pack(fbi->var.xres - 1, fbi->var.xres - 1); + outreg(disp, GC_HDB_HDP, reg); + reg = pack((fbi->var.yres - 1), vsp(&fbi->var)); + outreg(disp, GC_VDP_VSP, reg); + reg = ((fbi->var.vsync_len - 1) << 24) | + pack((fbi->var.hsync_len - 1), hsp(&fbi->var)); + outreg(disp, GC_VSW_HSW_HSP, reg); + outreg(disp, GC_HTP, pack(h_total(&fbi->var) - 1, 0)); + outreg(disp, GC_VTR, pack(v_total(&fbi->var) - 1, 0)); + + /* display on */ + reg = inreg(disp, GC_DCM1); + reg |= GC_DCM01_DEN | GC_DCM01_L0E; + reg &= ~GC_DCM01_ESY; + outreg(disp, GC_DCM1, reg); + return 0; +} + +static int mb862xxfb_pan(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct mb862xxfb_par *par = info->par; + unsigned long reg; + + reg = pack(var->yoffset, var->xoffset); + outreg(disp, GC_L0WY_L0WX, reg); + + reg = pack(var->yres_virtual, var->xres_virtual); + outreg(disp, GC_L0WH_L0WW, reg); + return 0; +} + +static int mb862xxfb_blank(int mode, struct fb_info *fbi) +{ + struct mb862xxfb_par *par = fbi->par; + unsigned long reg; + + dev_dbg(fbi->dev, "blank mode=%d\n", mode); + + switch (mode) { + case FB_BLANK_POWERDOWN: + reg = inreg(disp, GC_DCM1); + reg &= ~GC_DCM01_DEN; + outreg(disp, GC_DCM1, reg); + break; + case FB_BLANK_UNBLANK: + reg = inreg(disp, GC_DCM1); + reg |= GC_DCM01_DEN; + outreg(disp, GC_DCM1, reg); + break; + case FB_BLANK_NORMAL: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + default: + return 1; + } + return 0; +} + +/* framebuffer ops */ +static struct fb_ops mb862xxfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = mb862xxfb_check_var, + .fb_set_par = mb862xxfb_set_par, + .fb_setcolreg = mb862xxfb_setcolreg, + .fb_blank = mb862xxfb_blank, + .fb_pan_display = mb862xxfb_pan, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +/* initialize fb_info data */ +static int mb862xxfb_init_fbinfo(struct fb_info *fbi) +{ + struct mb862xxfb_par *par = fbi->par; + struct mb862xx_gc_mode *mode = par->gc_mode; + unsigned long reg; + + fbi->fbops = &mb862xxfb_ops; + fbi->pseudo_palette = par->pseudo_palette; + fbi->screen_base = par->fb_base; + fbi->screen_size = par->mapped_vram; + + strcpy(fbi->fix.id, DRV_NAME); + fbi->fix.smem_start = (unsigned long)par->fb_base_phys; + fbi->fix.smem_len = par->mapped_vram; + fbi->fix.mmio_start = (unsigned long)par->mmio_base_phys; + fbi->fix.mmio_len = par->mmio_len; + fbi->fix.accel = FB_ACCEL_NONE; + fbi->fix.type = FB_TYPE_PACKED_PIXELS; + fbi->fix.type_aux = 0; + fbi->fix.xpanstep = 1; + fbi->fix.ypanstep = 1; + fbi->fix.ywrapstep = 0; + + reg = inreg(disp, GC_DCM1); + if (reg & GC_DCM01_DEN && reg & GC_DCM01_L0E) { + /* get the disp mode from active display cfg */ + unsigned long sc = ((reg & GC_DCM01_SC) >> 8) + 1; + unsigned long hsp, vsp, ht, vt; + + dev_dbg(par->dev, "using bootloader's disp. mode\n"); + fbi->var.pixclock = (sc * 1000000) / par->refclk; + fbi->var.xres = (inreg(disp, GC_HDB_HDP) & 0x0fff) + 1; + reg = inreg(disp, GC_VDP_VSP); + fbi->var.yres = ((reg >> 16) & 0x0fff) + 1; + vsp = (reg & 0x0fff) + 1; + fbi->var.xres_virtual = fbi->var.xres; + fbi->var.yres_virtual = fbi->var.yres; + reg = inreg(disp, GC_L0EM); + if (reg & GC_L0EM_L0EC_24) { + fbi->var.bits_per_pixel = 32; + } else { + reg = inreg(disp, GC_L0M); + if (reg & GC_L0M_L0C_16) + fbi->var.bits_per_pixel = 16; + else + fbi->var.bits_per_pixel = 8; + } + reg = inreg(disp, GC_VSW_HSW_HSP); + fbi->var.hsync_len = ((reg & 0xff0000) >> 16) + 1; + fbi->var.vsync_len = ((reg & 0x3f000000) >> 24) + 1; + hsp = (reg & 0xffff) + 1; + ht = ((inreg(disp, GC_HTP) & 0xfff0000) >> 16) + 1; + fbi->var.right_margin = hsp - fbi->var.xres; + fbi->var.left_margin = ht - hsp - fbi->var.hsync_len; + vt = ((inreg(disp, GC_VTR) & 0xfff0000) >> 16) + 1; + fbi->var.lower_margin = vsp - fbi->var.yres; + fbi->var.upper_margin = vt - vsp - fbi->var.vsync_len; + } else if (mode) { + dev_dbg(par->dev, "using supplied mode\n"); + fb_videomode_to_var(&fbi->var, (struct fb_videomode *)mode); + fbi->var.bits_per_pixel = mode->def_bpp ? mode->def_bpp : 8; + } else { + int ret; + + ret = fb_find_mode(&fbi->var, fbi, "640x480-16@60", + NULL, 0, NULL, 16); + if (ret == 0 || ret == 4) { + dev_err(par->dev, + "failed to get initial mode\n"); + return -EINVAL; + } + } + + fbi->var.xoffset = 0; + fbi->var.yoffset = 0; + fbi->var.grayscale = 0; + fbi->var.nonstd = 0; + fbi->var.height = -1; + fbi->var.width = -1; + fbi->var.accel_flags = 0; + fbi->var.vmode = FB_VMODE_NONINTERLACED; + fbi->var.activate = FB_ACTIVATE_NOW; + fbi->flags = FBINFO_DEFAULT | +#ifdef __BIG_ENDIAN + FBINFO_FOREIGN_ENDIAN | +#endif + FBINFO_HWACCEL_XPAN | + FBINFO_HWACCEL_YPAN; + + /* check and possibly fix bpp */ + if ((fbi->fbops->fb_check_var)(&fbi->var, fbi)) + dev_err(par->dev, "check_var() failed on initial setup?\n"); + + fbi->fix.visual = fbi->var.bits_per_pixel == 8 ? + FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; + fbi->fix.line_length = (fbi->var.xres_virtual * + fbi->var.bits_per_pixel) / 8; + return 0; +} + +/* + * show some display controller and cursor registers + */ +static ssize_t mb862xxfb_show_dispregs(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct mb862xxfb_par *par = fbi->par; + char *ptr = buf; + unsigned int reg; + + for (reg = GC_DCM0; reg <= GC_L0DY_L0DX; reg += 4) + ptr += sprintf(ptr, "%08x = %08x\n", + reg, inreg(disp, reg)); + + for (reg = GC_CPM_CUTC; reg <= GC_CUY1_CUX1; reg += 4) + ptr += sprintf(ptr, "%08x = %08x\n", + reg, inreg(disp, reg)); + + for (reg = GC_DCM1; reg <= GC_L0WH_L0WW; reg += 4) + ptr += sprintf(ptr, "%08x = %08x\n", + reg, inreg(disp, reg)); + + return ptr - buf; +} + +static DEVICE_ATTR(dispregs, 0444, mb862xxfb_show_dispregs, NULL); + +irqreturn_t mb862xx_intr(int irq, void *dev_id) +{ + struct mb862xxfb_par *par = (struct mb862xxfb_par *) dev_id; + unsigned long reg_ist, mask; + + if (!par) + return IRQ_NONE; + + if (par->type == BT_CARMINE) { + /* Get Interrupt Status */ + reg_ist = inreg(ctrl, GC_CTRL_STATUS); + mask = inreg(ctrl, GC_CTRL_INT_MASK); + if (reg_ist == 0) + return IRQ_HANDLED; + + reg_ist &= mask; + if (reg_ist == 0) + return IRQ_HANDLED; + + /* Clear interrupt status */ + outreg(ctrl, 0x0, reg_ist); + } else { + /* Get status */ + reg_ist = inreg(host, GC_IST); + mask = inreg(host, GC_IMASK); + + reg_ist &= mask; + if (reg_ist == 0) + return IRQ_HANDLED; + + /* Clear status */ + outreg(host, GC_IST, ~reg_ist); + } + return IRQ_HANDLED; +} + +#if defined(CONFIG_FB_MB862XX_LIME) +/* + * GDC (Lime, Coral(B/Q), Mint, ...) on host bus + */ +static int mb862xx_gdc_init(struct mb862xxfb_par *par) +{ + unsigned long ccf, mmr; + unsigned long ver, rev; + + if (!par) + return -ENODEV; + +#if defined(CONFIG_FB_PRE_INIT_FB) + par->pre_init = 1; +#endif + par->host = par->mmio_base; + par->i2c = par->mmio_base + MB862XX_I2C_BASE; + par->disp = par->mmio_base + MB862XX_DISP_BASE; + par->cap = par->mmio_base + MB862XX_CAP_BASE; + par->draw = par->mmio_base + MB862XX_DRAW_BASE; + par->geo = par->mmio_base + MB862XX_GEO_BASE; + par->pio = par->mmio_base + MB862XX_PIO_BASE; + + par->refclk = GC_DISP_REFCLK_400; + + ver = inreg(host, GC_CID); + rev = inreg(pio, GC_REVISION); + if ((ver == 0x303) && (rev & 0xffffff00) == 0x20050100) { + dev_info(par->dev, "Fujitsu Lime v1.%d found\n", + (int)rev & 0xff); + par->type = BT_LIME; + ccf = par->gc_mode ? par->gc_mode->ccf : GC_CCF_COT_100; + mmr = par->gc_mode ? par->gc_mode->mmr : 0x414fb7f2; + } else { + dev_info(par->dev, "? GDC, CID/Rev.: 0x%lx/0x%lx \n", ver, rev); + return -ENODEV; + } + + if (!par->pre_init) { + outreg(host, GC_CCF, ccf); + udelay(200); + outreg(host, GC_MMR, mmr); + udelay(10); + } + + /* interrupt status */ + outreg(host, GC_IST, 0); + outreg(host, GC_IMASK, GC_INT_EN); + return 0; +} + +static int __devinit of_platform_mb862xx_probe(struct of_device *ofdev, + const struct of_device_id *id) +{ + struct device_node *np = ofdev->node; + struct device *dev = &ofdev->dev; + struct mb862xxfb_par *par; + struct fb_info *info; + struct resource res; + resource_size_t res_size; + unsigned long ret = -ENODEV; + + if (of_address_to_resource(np, 0, &res)) { + dev_err(dev, "Invalid address\n"); + return -ENXIO; + } + + info = framebuffer_alloc(sizeof(struct mb862xxfb_par), dev); + if (info == NULL) { + dev_err(dev, "cannot allocate framebuffer\n"); + return -ENOMEM; + } + + par = info->par; + par->info = info; + par->dev = dev; + + par->irq = irq_of_parse_and_map(np, 0); + if (par->irq == NO_IRQ) { + dev_err(dev, "failed to map irq\n"); + ret = -ENODEV; + goto fbrel; + } + + res_size = 1 + res.end - res.start; + par->res = request_mem_region(res.start, res_size, DRV_NAME); + if (par->res == NULL) { + dev_err(dev, "Cannot claim framebuffer/mmio\n"); + ret = -ENXIO; + goto irqdisp; + } + +#if defined(CONFIG_LWMON5) + par->gc_mode = &lwmon5_gc_mode; +#endif + +#if defined(CONFIG_SOCRATES) + par->gc_mode = &socrates_gc_mode; +#endif + + par->fb_base_phys = res.start; + par->mmio_base_phys = res.start + MB862XX_MMIO_BASE; + par->mmio_len = MB862XX_MMIO_SIZE; + if (par->gc_mode) + par->mapped_vram = par->gc_mode->max_vram; + else + par->mapped_vram = MB862XX_MEM_SIZE; + + par->fb_base = ioremap(par->fb_base_phys, par->mapped_vram); + if (par->fb_base == NULL) { + dev_err(dev, "Cannot map framebuffer\n"); + goto rel_reg; + } + + par->mmio_base = ioremap(par->mmio_base_phys, par->mmio_len); + if (par->mmio_base == NULL) { + dev_err(dev, "Cannot map registers\n"); + goto fb_unmap; + } + + dev_dbg(dev, "fb phys 0x%llx 0x%lx\n", + (u64)par->fb_base_phys, (ulong)par->mapped_vram); + dev_dbg(dev, "mmio phys 0x%llx 0x%lx, (irq = %d)\n", + (u64)par->mmio_base_phys, (ulong)par->mmio_len, par->irq); + + if (mb862xx_gdc_init(par)) + goto io_unmap; + + if (request_irq(par->irq, mb862xx_intr, IRQF_DISABLED, + DRV_NAME, (void *)par)) { + dev_err(dev, "Cannot request irq\n"); + goto io_unmap; + } + + mb862xxfb_init_fbinfo(info); + + if (fb_alloc_cmap(&info->cmap, NR_PALETTE, 0) < 0) { + dev_err(dev, "Could not allocate cmap for fb_info.\n"); + goto free_irq; + } + + if ((info->fbops->fb_set_par)(info)) + dev_err(dev, "set_var() failed on initial setup?\n"); + + if (register_framebuffer(info)) { + dev_err(dev, "failed to register framebuffer\n"); + goto rel_cmap; + } + + dev_set_drvdata(dev, info); + + if (device_create_file(dev, &dev_attr_dispregs)) + dev_err(dev, "Can't create sysfs regdump file\n"); + return 0; + +rel_cmap: + fb_dealloc_cmap(&info->cmap); +free_irq: + outreg(host, GC_IMASK, 0); + free_irq(par->irq, (void *)par); +io_unmap: + iounmap(par->mmio_base); +fb_unmap: + iounmap(par->fb_base); +rel_reg: + release_mem_region(res.start, res_size); +irqdisp: + irq_dispose_mapping(par->irq); +fbrel: + dev_set_drvdata(dev, NULL); + framebuffer_release(info); + return ret; +} + +static int __devexit of_platform_mb862xx_remove(struct of_device *ofdev) +{ + struct fb_info *fbi = dev_get_drvdata(&ofdev->dev); + struct mb862xxfb_par *par = fbi->par; + resource_size_t res_size = 1 + par->res->end - par->res->start; + unsigned long reg; + + dev_dbg(fbi->dev, "%s release\n", fbi->fix.id); + + /* display off */ + reg = inreg(disp, GC_DCM1); + reg &= ~(GC_DCM01_DEN | GC_DCM01_L0E); + outreg(disp, GC_DCM1, reg); + + /* disable interrupts */ + outreg(host, GC_IMASK, 0); + + free_irq(par->irq, (void *)par); + irq_dispose_mapping(par->irq); + + device_remove_file(&ofdev->dev, &dev_attr_dispregs); + + unregister_framebuffer(fbi); + fb_dealloc_cmap(&fbi->cmap); + + iounmap(par->mmio_base); + iounmap(par->fb_base); + + dev_set_drvdata(&ofdev->dev, NULL); + release_mem_region(par->res->start, res_size); + framebuffer_release(fbi); + return 0; +} + +/* + * common types + */ +static struct of_device_id __devinitdata of_platform_mb862xx_tbl[] = { + { .compatible = "fujitsu,MB86276", }, + { .compatible = "fujitsu,lime", }, + { .compatible = "fujitsu,MB86277", }, + { .compatible = "fujitsu,mint", }, + { .compatible = "fujitsu,MB86293", }, + { .compatible = "fujitsu,MB86294", }, + { .compatible = "fujitsu,coral", }, + { /* end */ } +}; + +static struct of_platform_driver of_platform_mb862xxfb_driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + .match_table = of_platform_mb862xx_tbl, + .probe = of_platform_mb862xx_probe, + .remove = __devexit_p(of_platform_mb862xx_remove), +}; +#endif + +#if defined(CONFIG_FB_MB862XX_PCI_GDC) +static int coralp_init(struct mb862xxfb_par *par) +{ + int cn, ver; + + par->host = par->mmio_base; + par->i2c = par->mmio_base + MB862XX_I2C_BASE; + par->disp = par->mmio_base + MB862XX_DISP_BASE; + par->cap = par->mmio_base + MB862XX_CAP_BASE; + par->draw = par->mmio_base + MB862XX_DRAW_BASE; + par->geo = par->mmio_base + MB862XX_GEO_BASE; + par->pio = par->mmio_base + MB862XX_PIO_BASE; + + par->refclk = GC_DISP_REFCLK_400; + + ver = inreg(host, GC_CID); + cn = (ver & GC_CID_CNAME_MSK) >> 8; + ver = ver & GC_CID_VERSION_MSK; + if (cn == 3) { + dev_info(par->dev, "Fujitsu Coral-%s GDC Rev.%d found\n",\ + (ver == 6) ? "P" : (ver == 8) ? "PA" : "?", + par->pdev->revision); + outreg(host, GC_CCF, GC_CCF_CGE_166 | GC_CCF_COT_133); + udelay(200); + outreg(host, GC_MMR, GC_MMR_CORALP_EVB_VAL); + udelay(10); + /* Clear interrupt status */ + outreg(host, GC_IST, 0); + } else { + return -ENODEV; + } + return 0; +} + +static int init_dram_ctrl(struct mb862xxfb_par *par) +{ + unsigned long i = 0; + + /* + * Set io mode first! Spec. says IC may be destroyed + * if not set to SSTL2/LVCMOS before init. + */ + outreg(dram_ctrl, GC_DCTL_IOCONT1_IOCONT0, GC_EVB_DCTL_IOCONT1_IOCONT0); + + /* DRAM init */ + outreg(dram_ctrl, GC_DCTL_MODE_ADD, GC_EVB_DCTL_MODE_ADD); + outreg(dram_ctrl, GC_DCTL_SETTIME1_EMODE, GC_EVB_DCTL_SETTIME1_EMODE); + outreg(dram_ctrl, GC_DCTL_REFRESH_SETTIME2, + GC_EVB_DCTL_REFRESH_SETTIME2); + outreg(dram_ctrl, GC_DCTL_RSV2_RSV1, GC_EVB_DCTL_RSV2_RSV1); + outreg(dram_ctrl, GC_DCTL_DDRIF2_DDRIF1, GC_EVB_DCTL_DDRIF2_DDRIF1); + outreg(dram_ctrl, GC_DCTL_RSV0_STATES, GC_EVB_DCTL_RSV0_STATES); + + /* DLL reset done? */ + while ((inreg(dram_ctrl, GC_DCTL_RSV0_STATES) & GC_DCTL_STATES_MSK)) { + udelay(GC_DCTL_INIT_WAIT_INTERVAL); + if (i++ > GC_DCTL_INIT_WAIT_CNT) { + dev_err(par->dev, "VRAM init failed.\n"); + return -EINVAL; + } + } + outreg(dram_ctrl, GC_DCTL_MODE_ADD, GC_EVB_DCTL_MODE_ADD_AFT_RST); + outreg(dram_ctrl, GC_DCTL_RSV0_STATES, GC_EVB_DCTL_RSV0_STATES_AFT_RST); + return 0; +} + +static int carmine_init(struct mb862xxfb_par *par) +{ + unsigned long reg; + + par->ctrl = par->mmio_base + MB86297_CTRL_BASE; + par->i2c = par->mmio_base + MB86297_I2C_BASE; + par->disp = par->mmio_base + MB86297_DISP0_BASE; + par->disp1 = par->mmio_base + MB86297_DISP1_BASE; + par->cap = par->mmio_base + MB86297_CAP0_BASE; + par->cap1 = par->mmio_base + MB86297_CAP1_BASE; + par->draw = par->mmio_base + MB86297_DRAW_BASE; + par->dram_ctrl = par->mmio_base + MB86297_DRAMCTRL_BASE; + par->wrback = par->mmio_base + MB86297_WRBACK_BASE; + + par->refclk = GC_DISP_REFCLK_533; + + /* warm up */ + reg = GC_CTRL_CLK_EN_DRAM | GC_CTRL_CLK_EN_2D3D | GC_CTRL_CLK_EN_DISP0; + outreg(ctrl, GC_CTRL_CLK_ENABLE, reg); + + /* check for engine module revision */ + if (inreg(draw, GC_2D3D_REV) == GC_RE_REVISION) + dev_info(par->dev, "Fujitsu Carmine GDC Rev.%d found\n", + par->pdev->revision); + else + goto err_init; + + reg &= ~GC_CTRL_CLK_EN_2D3D; + outreg(ctrl, GC_CTRL_CLK_ENABLE, reg); + + /* set up vram */ + if (init_dram_ctrl(par) < 0) + goto err_init; + + outreg(ctrl, GC_CTRL_INT_MASK, 0); + return 0; + +err_init: + outreg(ctrl, GC_CTRL_CLK_ENABLE, 0); + return -EINVAL; +} + +static inline int mb862xx_pci_gdc_init(struct mb862xxfb_par *par) +{ + switch (par->type) { + case BT_CORALP: + return coralp_init(par); + case BT_CARMINE: + return carmine_init(par); + default: + return -ENODEV; + } +} + +#define CHIP_ID(id) \ + { PCI_DEVICE(PCI_VENDOR_ID_FUJITSU_LIMITED, id) } + +static struct pci_device_id mb862xx_pci_tbl[] __devinitdata = { + /* MB86295/MB86296 */ + CHIP_ID(PCI_DEVICE_ID_FUJITSU_CORALP), + CHIP_ID(PCI_DEVICE_ID_FUJITSU_CORALPA), + /* MB86297 */ + CHIP_ID(PCI_DEVICE_ID_FUJITSU_CARMINE), + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, mb862xx_pci_tbl); + +static int __devinit mb862xx_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct mb862xxfb_par *par; + struct fb_info *info; + struct device *dev = &pdev->dev; + int ret; + + ret = pci_enable_device(pdev); + if (ret < 0) { + dev_err(dev, "Cannot enable PCI device\n"); + goto out; + } + + info = framebuffer_alloc(sizeof(struct mb862xxfb_par), dev); + if (!info) { + dev_err(dev, "framebuffer alloc failed\n"); + ret = -ENOMEM; + goto dis_dev; + } + + par = info->par; + par->info = info; + par->dev = dev; + par->pdev = pdev; + par->irq = pdev->irq; + + ret = pci_request_regions(pdev, DRV_NAME); + if (ret < 0) { + dev_err(dev, "Cannot reserve region(s) for PCI device\n"); + goto rel_fb; + } + + switch (pdev->device) { + case PCI_DEVICE_ID_FUJITSU_CORALP: + case PCI_DEVICE_ID_FUJITSU_CORALPA: + par->fb_base_phys = pci_resource_start(par->pdev, 0); + par->mapped_vram = CORALP_MEM_SIZE; + par->mmio_base_phys = par->fb_base_phys + MB862XX_MMIO_BASE; + par->mmio_len = MB862XX_MMIO_SIZE; + par->type = BT_CORALP; + break; + case PCI_DEVICE_ID_FUJITSU_CARMINE: + par->fb_base_phys = pci_resource_start(par->pdev, 2); + par->mmio_base_phys = pci_resource_start(par->pdev, 3); + par->mmio_len = pci_resource_len(par->pdev, 3); + par->mapped_vram = CARMINE_MEM_SIZE; + par->type = BT_CARMINE; + break; + default: + /* should never occur */ + goto rel_reg; + } + + par->fb_base = ioremap(par->fb_base_phys, par->mapped_vram); + if (par->fb_base == NULL) { + dev_err(dev, "Cannot map framebuffer\n"); + goto rel_reg; + } + + par->mmio_base = ioremap(par->mmio_base_phys, par->mmio_len); + if (par->mmio_base == NULL) { + dev_err(dev, "Cannot map registers\n"); + ret = -EIO; + goto fb_unmap; + } + + dev_dbg(dev, "fb phys 0x%llx 0x%lx\n", + (u64)par->fb_base_phys, (ulong)par->mapped_vram); + dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n", + (u64)par->mmio_base_phys, (ulong)par->mmio_len); + + if (mb862xx_pci_gdc_init(par)) + goto io_unmap; + + if (request_irq(par->irq, mb862xx_intr, IRQF_DISABLED | IRQF_SHARED, + DRV_NAME, (void *)par)) { + dev_err(dev, "Cannot request irq\n"); + goto io_unmap; + } + + mb862xxfb_init_fbinfo(info); + + if (fb_alloc_cmap(&info->cmap, NR_PALETTE, 0) < 0) { + dev_err(dev, "Could not allocate cmap for fb_info.\n"); + ret = -ENOMEM; + goto free_irq; + } + + if ((info->fbops->fb_set_par)(info)) + dev_err(dev, "set_var() failed on initial setup?\n"); + + ret = register_framebuffer(info); + if (ret < 0) { + dev_err(dev, "failed to register framebuffer\n"); + goto rel_cmap; + } + + pci_set_drvdata(pdev, info); + + if (device_create_file(dev, &dev_attr_dispregs)) + dev_err(dev, "Can't create sysfs regdump file\n"); + + if (par->type == BT_CARMINE) + outreg(ctrl, GC_CTRL_INT_MASK, GC_CARMINE_INT_EN); + else + outreg(host, GC_IMASK, GC_INT_EN); + + return 0; + +rel_cmap: + fb_dealloc_cmap(&info->cmap); +free_irq: + free_irq(par->irq, (void *)par); +io_unmap: + iounmap(par->mmio_base); +fb_unmap: + iounmap(par->fb_base); +rel_reg: + pci_release_regions(pdev); +rel_fb: + framebuffer_release(info); +dis_dev: + pci_disable_device(pdev); +out: + return ret; +} + +static void __devexit mb862xx_pci_remove(struct pci_dev *pdev) +{ + struct fb_info *fbi = pci_get_drvdata(pdev); + struct mb862xxfb_par *par = fbi->par; + unsigned long reg; + + dev_dbg(fbi->dev, "%s release\n", fbi->fix.id); + + /* display off */ + reg = inreg(disp, GC_DCM1); + reg &= ~(GC_DCM01_DEN | GC_DCM01_L0E); + outreg(disp, GC_DCM1, reg); + + if (par->type == BT_CARMINE) { + outreg(ctrl, GC_CTRL_INT_MASK, 0); + outreg(ctrl, GC_CTRL_CLK_ENABLE, 0); + } else { + outreg(host, GC_IMASK, 0); + } + + device_remove_file(&pdev->dev, &dev_attr_dispregs); + + pci_set_drvdata(pdev, NULL); + unregister_framebuffer(fbi); + fb_dealloc_cmap(&fbi->cmap); + + free_irq(par->irq, (void *)par); + iounmap(par->mmio_base); + iounmap(par->fb_base); + + pci_release_regions(pdev); + framebuffer_release(fbi); + pci_disable_device(pdev); +} + +static struct pci_driver mb862xxfb_pci_driver = { + .name = DRV_NAME, + .id_table = mb862xx_pci_tbl, + .probe = mb862xx_pci_probe, + .remove = __devexit_p(mb862xx_pci_remove), +}; +#endif + +static int __devinit mb862xxfb_init(void) +{ + int ret = -ENODEV; + +#if defined(CONFIG_FB_MB862XX_LIME) + ret = of_register_platform_driver(&of_platform_mb862xxfb_driver); +#endif +#if defined(CONFIG_FB_MB862XX_PCI_GDC) + ret = pci_register_driver(&mb862xxfb_pci_driver); +#endif + return ret; +} + +static void __exit mb862xxfb_exit(void) +{ +#if defined(CONFIG_FB_MB862XX_LIME) + of_unregister_platform_driver(&of_platform_mb862xxfb_driver); +#endif +#if defined(CONFIG_FB_MB862XX_PCI_GDC) + pci_unregister_driver(&mb862xxfb_pci_driver); +#endif +} + +module_init(mb862xxfb_init); +module_exit(mb862xxfb_exit); + +MODULE_DESCRIPTION("Fujitsu MB862xx Framebuffer driver"); +MODULE_AUTHOR("Anatolij Gustschin "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/mb862xx/mb862xxfb.h b/drivers/video/mb862xx/mb862xxfb.h new file mode 100644 index 000000000000..c4c8f4dd2217 --- /dev/null +++ b/drivers/video/mb862xx/mb862xxfb.h @@ -0,0 +1,83 @@ +#ifndef __MB862XX_H__ +#define __MB862XX_H__ + +#define PCI_VENDOR_ID_FUJITSU_LIMITED 0x10cf +#define PCI_DEVICE_ID_FUJITSU_CORALP 0x2019 +#define PCI_DEVICE_ID_FUJITSU_CORALPA 0x201e +#define PCI_DEVICE_ID_FUJITSU_CARMINE 0x202b + +#define GC_MMR_CORALP_EVB_VAL 0x11d7fa13 + +enum gdctype { + BT_NONE, + BT_LIME, + BT_MINT, + BT_CORAL, + BT_CORALP, + BT_CARMINE, +}; + +struct mb862xx_gc_mode { + struct fb_videomode def_mode; /* mode of connected display */ + unsigned int def_bpp; /* default depth */ + unsigned long max_vram; /* connected SDRAM size */ + unsigned long ccf; /* gdc clk */ + unsigned long mmr; /* memory mode for SDRAM */ +}; + +/* private data */ +struct mb862xxfb_par { + struct fb_info *info; /* fb info head */ + struct device *dev; + struct pci_dev *pdev; + struct resource *res; /* framebuffer/mmio resource */ + + resource_size_t fb_base_phys; /* fb base, 36-bit PPC440EPx */ + resource_size_t mmio_base_phys; /* io base addr */ + void __iomem *fb_base; /* remapped framebuffer */ + void __iomem *mmio_base; /* remapped registers */ + size_t mapped_vram; /* length of remapped vram */ + size_t mmio_len; /* length of register region */ + + void __iomem *host; /* relocatable reg. bases */ + void __iomem *i2c; + void __iomem *disp; + void __iomem *disp1; + void __iomem *cap; + void __iomem *cap1; + void __iomem *draw; + void __iomem *geo; + void __iomem *pio; + void __iomem *ctrl; + void __iomem *dram_ctrl; + void __iomem *wrback; + + unsigned int irq; + unsigned int type; /* GDC type */ + unsigned int refclk; /* disp. reference clock */ + struct mb862xx_gc_mode *gc_mode; /* GDC mode init data */ + int pre_init; /* don't init display if 1 */ + + u32 pseudo_palette[16]; +}; + +#if defined(CONFIG_FB_MB862XX_LIME) && defined(CONFIG_FB_MB862XX_PCI_GDC) +#error "Select Lime GDC or CoralP/Carmine support, but not both together" +#endif +#if defined(CONFIG_FB_MB862XX_LIME) +#define gdc_read __raw_readl +#define gdc_write __raw_writel +#else +#define gdc_read readl +#define gdc_write writel +#endif + +#define inreg(type, off) \ + gdc_read((par->type + (off))) + +#define outreg(type, off, val) \ + gdc_write((val), (par->type + (off))) + +#define pack(a, b) (((a) << 16) | (b)) + +#endif -- cgit v1.2.3 From 0aedadf91a70a11c4a3e7c7d99b21e5528af8d5d Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 6 Nov 2008 12:53:30 -0800 Subject: mm: move migrate_prep out from under mmap_sem Move the migrate_prep outside the mmap_sem for the following system calls 1. sys_move_pages 2. sys_migrate_pages 3. sys_mbind() It really does not matter when we flush the lru. The system is free to add pages onto the lru even during migration which will make the page migration either skip the page (mbind, migrate_pages) or return a busy state (move_pages). Fixes this lockdep warning (and potential deadlock): Some VM place has mmap_sem -> kevent_wq via lru_add_drain_all() net/core/dev.c::dev_ioctl() has rtnl_lock -> mmap_sem (*) the ioctl has copy_from_user() and it can do page fault. linkwatch_event has kevent_wq -> rtnl_lock Signed-off-by: Christoph Lameter Cc: KOSAKI Motohiro Reported-by: Heiko Carstens Cc: Nick Piggin Cc: Hugh Dickins Cc: Rik van Riel Cc: Lee Schermerhorn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 18 +++++++++++------- mm/migrate.c | 2 +- 2 files changed, 12 insertions(+), 8 deletions(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 36f42573a335..e9493b1c1117 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -489,12 +489,6 @@ check_range(struct mm_struct *mm, unsigned long start, unsigned long end, int err; struct vm_area_struct *first, *vma, *prev; - if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL)) { - - err = migrate_prep(); - if (err) - return ERR_PTR(err); - } first = find_vma(mm, start); if (!first) @@ -809,9 +803,13 @@ int do_migrate_pages(struct mm_struct *mm, const nodemask_t *from_nodes, const nodemask_t *to_nodes, int flags) { int busy = 0; - int err = 0; + int err; nodemask_t tmp; + err = migrate_prep(); + if (err) + return err; + down_read(&mm->mmap_sem); err = migrate_vmas(mm, from_nodes, to_nodes, flags); @@ -974,6 +972,12 @@ static long do_mbind(unsigned long start, unsigned long len, start, start + len, mode, mode_flags, nmask ? nodes_addr(*nmask)[0] : -1); + if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL)) { + + err = migrate_prep(); + if (err) + return err; + } down_write(&mm->mmap_sem); vma = check_range(mm, start, end, nmask, flags | MPOL_MF_INVERT, &pagelist); diff --git a/mm/migrate.c b/mm/migrate.c index 6602941bfab0..385db89f0c33 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -841,12 +841,12 @@ static int do_move_page_to_node_array(struct mm_struct *mm, struct page_to_node *pp; LIST_HEAD(pagelist); + migrate_prep(); down_read(&mm->mmap_sem); /* * Build a list of pages to migrate */ - migrate_prep(); for (pp = pm; pp->node != MAX_NUMNODES; pp++) { struct vm_area_struct *vma; struct page *page; -- cgit v1.2.3 From b41ad14c30acf023d09ac064096a4cf41248ce46 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 6 Nov 2008 12:53:31 -0800 Subject: vmemmap: warn about page_structs with remote distance It's insufficient to simply compare node ids when warning about offnode page_structs since it's possible to still have local affinity. Acked-by: Christoph Lameter Signed-off-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/sparse-vmemmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c index a91b5f8fcaf6..a13ea6401ae7 100644 --- a/mm/sparse-vmemmap.c +++ b/mm/sparse-vmemmap.c @@ -64,7 +64,7 @@ void __meminit vmemmap_verify(pte_t *pte, int node, unsigned long pfn = pte_pfn(*pte); int actual_node = early_pfn_to_nid(pfn); - if (actual_node != node) + if (node_distance(actual_node, node) > LOCAL_DISTANCE) printk(KERN_WARNING "[%lx-%lx] potential offnode " "page_structs\n", start, end - 1); } -- cgit v1.2.3 From 24eb089950ce44603b30a3145a2c8520e2b55bb1 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 6 Nov 2008 12:53:32 -0800 Subject: cgroups: fix invalid cgrp->dentry before cgroup has been completely removed This fixes an oops when reading /proc/sched_debug. A cgroup won't be removed completely until finishing cgroup_diput(), so we shouldn't invalidate cgrp->dentry in cgroup_rmdir(). Otherwise, when a group is being removed while cgroup_path() gets called, we may trigger NULL dereference BUG. The bug can be reproduced: # cat test.sh #!/bin/sh mount -t cgroup -o cpu xxx /mnt for (( ; ; )) { mkdir /mnt/sub rmdir /mnt/sub } # ./test.sh & # cat /proc/sched_debug BUG: unable to handle kernel NULL pointer dereference at 00000038 IP: [] cgroup_path+0x39/0x90 ... Call Trace: [] ? print_cfs_rq+0x6e/0x75d [] ? sched_debug_show+0x72d/0xc1e ... Signed-off-by: Li Zefan Acked-by: Paul Menage Cc: Peter Zijlstra Cc: Ingo Molnar Cc: [2.6.26.x, 2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 35eebd5510c2..358e77564e6f 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2497,7 +2497,6 @@ static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry) list_del(&cgrp->sibling); spin_lock(&cgrp->dentry->d_lock); d = dget(cgrp->dentry); - cgrp->dentry = NULL; spin_unlock(&d->d_lock); cgroup_d_remove_dir(d); -- cgit v1.2.3 From 1b6bcdbe7eaacde19b5d633b33c8d056e4818de0 Mon Sep 17 00:00:00 2001 From: Tim Hockin Date: Thu, 6 Nov 2008 12:53:33 -0800 Subject: Documentation/email-clients.txt: add some info about gmail Signed-off-by: Tim Hockin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/email-clients.txt | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt index 2ebb94d6ed8e..a618efab7b15 100644 --- a/Documentation/email-clients.txt +++ b/Documentation/email-clients.txt @@ -213,4 +213,29 @@ TkRat (GUI) Works. Use "Insert file..." or external editor. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Gmail (Web GUI) + +If you just have to use Gmail to send patches, it CAN be made to work. It +requires a bit of external help, though. + +The first problem is that Gmail converts tabs to spaces. This will +totally break your patches. To prevent this, you have to use a different +editor. There is a firefox extension called "ViewSourceWith" +(https://addons.mozilla.org/en-US/firefox/addon/394) which allows you to +edit any text box in the editor of your choice. Configure it to launch +your favorite editor. When you want to send a patch, use this technique. +Once you have crafted your messsage + patch, save and exit the editor, +which should reload the Gmail edit box. GMAIL WILL PRESERVE THE TABS. +Hoorah. Apparently you can cut-n-paste literal tabs, but Gmail will +convert those to spaces upon sending! + +The second problem is that Gmail converts tabs to spaces on replies. If +you reply to a patch, don't expect to be able to apply it as a patch. + +The last problem is that Gmail will base64-encode any message that has a +non-ASCII character. That includes things like European names. Be aware. + +Gmail is not convenient for lkml patches, but CAN be made to work. + ### -- cgit v1.2.3 From fd96feb2583688ad13d8467ded442f9c8d73cc4b Mon Sep 17 00:00:00 2001 From: dann frazier Date: Thu, 6 Nov 2008 12:53:34 -0800 Subject: cciss: add P700m to list of supported controllers P700m support was added in: 9cff3b383dad193b0762c27278a16237e10b53dc Update cciss.txt to match. Signed-off-by: dann frazier Acked-by: Mike Miller Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cciss.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index 48d80d95f0f8..89698e8df7d4 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -21,6 +21,7 @@ This driver is known to work with the following cards: * SA E200 * SA E200i * SA E500 + * SA P700m * SA P212 * SA P410 * SA P410i -- cgit v1.2.3 From fbdd12676c83df77480f00ebd32fc98fbe3bf836 Mon Sep 17 00:00:00 2001 From: Qinghuang Feng Date: Thu, 6 Nov 2008 12:53:34 -0800 Subject: mm/oom_kill.c: fix badness() kerneldoc Paramter @mem has been removed since v2.6.26, now delete it's comment. Signed-off-by: Qinghuang Feng Acked-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/oom_kill.c | 1 - 1 file changed, 1 deletion(-) diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 2846a58e5de9..a0a01902f551 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -38,7 +38,6 @@ static DEFINE_SPINLOCK(zone_scan_mutex); * badness - calculate a numeric value for how bad this task has been * @p: task struct of which task we should calculate * @uptime: current uptime in seconds - * @mem: target memory controller * * The formula used is relatively simple and documented inline in the * function. The main rationale is that we want to select a good task -- cgit v1.2.3 From c87591b719737b4e91eb1a9fa8fd55a4ff1886d6 Mon Sep 17 00:00:00 2001 From: Arthur Jones Date: Thu, 6 Nov 2008 12:53:35 -0800 Subject: ext3: wait on all pending commits in ext3_sync_fs In ext3_sync_fs, we only wait for a commit to finish if we started it, but there may be one already in progress which will not be synced. In the case of a data=ordered umount with pending long symlinks which are delayed due to a long list of other I/O on the backing block device, this causes the buffer associated with the long symlinks to not be moved to the inode dirty list in the second phase of fsync_super. Then, before they can be dirtied again, kjournald exits, seeing the UMOUNT flag and the dirty pages are never written to the backing block device, causing long symlink corruption and exposing new or previously freed block data to userspace. This can be reproduced with a script created by Eric Sandeen : #!/bin/bash umount /mnt/test2 mount /dev/sdb4 /mnt/test2 rm -f /mnt/test2/* dd if=/dev/zero of=/mnt/test2/bigfile bs=1M count=512 touch /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename ln -s /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename /mnt/test2/link umount /mnt/test2 mount /dev/sdb4 /mnt/test2 ls /mnt/test2/ umount /mnt/test2 To ensure all commits are synced, we flush all journal commits now when sync_fs'ing ext3. Signed-off-by: Arthur Jones Cc: Eric Sandeen Cc: Theodore Ts'o Cc: Cc: [2.6.everything] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext3/super.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index e5717a4fae67..5dec6d1356c4 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2390,13 +2390,12 @@ static void ext3_write_super (struct super_block * sb) static int ext3_sync_fs(struct super_block *sb, int wait) { - tid_t target; - sb->s_dirt = 0; - if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) { - if (wait) - log_wait_commit(EXT3_SB(sb)->s_journal, target); - } + if (wait) + ext3_force_commit(sb); + else + journal_start_commit(EXT3_SB(sb)->s_journal, NULL); + return 0; } -- cgit v1.2.3 From a70dcb969f64e2fa98c24f47854f20bf02ff0092 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Thu, 6 Nov 2008 12:53:36 -0800 Subject: memory hotplug: fix page_zone() calculation in test_pages_isolated() My last bugfix here (adding zone->lock) introduced a new problem: Using page_zone(pfn_to_page(pfn)) to get the zone after the for() loop is wrong. pfn will then be >= end_pfn, which may be in a different zone or not present at all. This may lead to an addressing exception in page_zone() or spin_lock_irqsave(). Now I use __first_valid_page() again after the loop to find a valid page for page_zone(). Signed-off-by: Gerald Schaefer Acked-by: Nathan Fontenot Reviewed-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_isolation.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/page_isolation.c b/mm/page_isolation.c index b70a7fec1ff6..5e0ffd967452 100644 --- a/mm/page_isolation.c +++ b/mm/page_isolation.c @@ -130,10 +130,11 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn) if (page && get_pageblock_migratetype(page) != MIGRATE_ISOLATE) break; } - if (pfn < end_pfn) + page = __first_valid_page(start_pfn, end_pfn - start_pfn); + if ((pfn < end_pfn) || !page) return -EBUSY; /* Check all pages are free or Marked as ISOLATED */ - zone = page_zone(pfn_to_page(pfn)); + zone = page_zone(page); spin_lock_irqsave(&zone->lock, flags); ret = __test_page_isolated_in_pageblock(start_pfn, end_pfn); spin_unlock_irqrestore(&zone->lock, flags); -- cgit v1.2.3 From a684e7d33096892093456dd56a582cfc3bfad648 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 6 Nov 2008 12:53:37 -0800 Subject: fbdev: fix fb_compat_ioctl() deadlocks commit 3e680aae4e53ab54cdbb0c29257dae0cbb158e1c ("fb: convert lock/unlock_kernel() into local fb mutex") introduced several deadlocks in the fb_compat_ioctl() path, as mutex_lock() doesn't allow recursion, unlike lock_kernel(). This broke frame buffer applications on 64-bit systems with a 32-bit userland. commit 120a37470c2831fea49fdebaceb5a7039f700ce6 ("framebuffer compat_ioctl deadlock") fixed one of the deadlocks. This patch fixes the remaining deadlocks: - Revert commit 120a37470c2831fea49fdebaceb5a7039f700ce6, - Extract the core logic of fb_ioctl() into a new function do_fb_ioctl(), - Change all callsites of fb_ioctl() where info->lock is already held to call do_fb_ioctl() instead, - Add sparse annotations to all routines that take info->lock. Signed-off-by: Geert Uytterhoeven Cc: Mikulas Patocka Cc: Krzysztof Helt Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/fbmem.c | 63 +++++++++++++++++++++++++++++++-------------------- 1 file changed, 39 insertions(+), 24 deletions(-) diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 6048b55f2878..1d5ae39cb271 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1002,13 +1002,9 @@ fb_blank(struct fb_info *info, int blank) return ret; } -static long -fb_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) +static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, + unsigned long arg) { - struct inode *inode = file->f_path.dentry->d_inode; - int fbidx = iminor(inode); - struct fb_info *info; struct fb_ops *fb; struct fb_var_screeninfo var; struct fb_fix_screeninfo fix; @@ -1018,14 +1014,10 @@ fb_ioctl(struct file *file, unsigned int cmd, void __user *argp = (void __user *)arg; long ret = 0; - info = registered_fb[fbidx]; - mutex_lock(&info->lock); fb = info->fbops; - - if (!fb) { - mutex_unlock(&info->lock); + if (!fb) return -ENODEV; - } + switch (cmd) { case FBIOGET_VSCREENINFO: ret = copy_to_user(argp, &info->var, @@ -1126,6 +1118,21 @@ fb_ioctl(struct file *file, unsigned int cmd, else ret = fb->fb_ioctl(info, cmd, arg); } + return ret; +} + +static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +__acquires(&info->lock) +__releases(&info->lock) +{ + struct inode *inode = file->f_path.dentry->d_inode; + int fbidx = iminor(inode); + struct fb_info *info; + long ret; + + info = registered_fb[fbidx]; + mutex_lock(&info->lock); + ret = do_fb_ioctl(info, cmd, arg); mutex_unlock(&info->lock); return ret; } @@ -1157,8 +1164,8 @@ struct fb_cmap32 { compat_caddr_t transp; }; -static int fb_getput_cmap(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int fb_getput_cmap(struct fb_info *info, unsigned int cmd, + unsigned long arg) { struct fb_cmap_user __user *cmap; struct fb_cmap32 __user *cmap32; @@ -1181,7 +1188,7 @@ static int fb_getput_cmap(struct inode *inode, struct file *file, put_user(compat_ptr(data), &cmap->transp)) return -EFAULT; - err = fb_ioctl(file, cmd, (unsigned long) cmap); + err = do_fb_ioctl(info, cmd, (unsigned long) cmap); if (!err) { if (copy_in_user(&cmap32->start, @@ -1223,8 +1230,8 @@ static int do_fscreeninfo_to_user(struct fb_fix_screeninfo *fix, return err; } -static int fb_get_fscreeninfo(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int fb_get_fscreeninfo(struct fb_info *info, unsigned int cmd, + unsigned long arg) { mm_segment_t old_fs; struct fb_fix_screeninfo fix; @@ -1235,7 +1242,7 @@ static int fb_get_fscreeninfo(struct inode *inode, struct file *file, old_fs = get_fs(); set_fs(KERNEL_DS); - err = fb_ioctl(file, cmd, (unsigned long) &fix); + err = do_fb_ioctl(info, cmd, (unsigned long) &fix); set_fs(old_fs); if (!err) @@ -1244,8 +1251,10 @@ static int fb_get_fscreeninfo(struct inode *inode, struct file *file, return err; } -static long -fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +static long fb_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +__acquires(&info->lock) +__releases(&info->lock) { struct inode *inode = file->f_path.dentry->d_inode; int fbidx = iminor(inode); @@ -1262,16 +1271,16 @@ fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case FBIOPUT_CON2FBMAP: arg = (unsigned long) compat_ptr(arg); case FBIOBLANK: - mutex_unlock(&info->lock); - return fb_ioctl(file, cmd, arg); + ret = do_fb_ioctl(info, cmd, arg); + break; case FBIOGET_FSCREENINFO: - ret = fb_get_fscreeninfo(inode, file, cmd, arg); + ret = fb_get_fscreeninfo(info, cmd, arg); break; case FBIOGETCMAP: case FBIOPUTCMAP: - ret = fb_getput_cmap(inode, file, cmd, arg); + ret = fb_getput_cmap(info, cmd, arg); break; default: @@ -1286,6 +1295,8 @@ fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) static int fb_mmap(struct file *file, struct vm_area_struct * vma) +__acquires(&info->lock) +__releases(&info->lock) { int fbidx = iminor(file->f_path.dentry->d_inode); struct fb_info *info = registered_fb[fbidx]; @@ -1339,6 +1350,8 @@ fb_mmap(struct file *file, struct vm_area_struct * vma) static int fb_open(struct inode *inode, struct file *file) +__acquires(&info->lock) +__releases(&info->lock) { int fbidx = iminor(inode); struct fb_info *info; @@ -1374,6 +1387,8 @@ out: static int fb_release(struct inode *inode, struct file *file) +__acquires(&info->lock) +__releases(&info->lock) { struct fb_info * const info = file->private_data; -- cgit v1.2.3 From b225d44e27521290faca2e0f9b1a4a8c74dc510a Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 6 Nov 2008 12:53:39 -0800 Subject: Documentation/kernel-parameters.txt: update 'isolcpus' kernel option cpuset can be used to move a process onto or off an isolated CPU. Signed-off-by: Li Zefan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kernel-parameters.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1bbcaa8982b6..8a8cb0ccc5f4 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -995,13 +995,15 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,..., or - - (must be a positive range in ascending order) + - + (must be a positive range in ascending order) or a mixture ,...,- + This option can be used to specify one or more CPUs to isolate from the general SMP balancing and scheduling - algorithms. The only way to move a process onto or off - an "isolated" CPU is via the CPU affinity syscalls. + algorithms. You can move a process onto or off an + "isolated" CPU via the CPU affinity syscalls or cpuset. begins at 0 and the maximum value is "number of CPUs in system - 1". -- cgit v1.2.3 From 06a7f058761cd232cab42d5c7da82f7255b51d5b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 6 Nov 2008 12:53:40 -0800 Subject: atmel_serial: keep clock off when it's not needed The atmel_serial driver is mismanaging its clock by leaving it on at all times ... the whole point of clock management is to leave it off unless it's actively needed, which conserves power!! Although the kernel doesn't actually hang without my fix, it does discard quite a lot of early console output. The result still looks correct: usart users= 1 on 35000000 Hz, for atmel_usart.0 usart users= 0 off 35000000 Hz, for atmel_usart.2 when using ttyS0 as serial console. [haavard.skinnemoen@atmel.com: Make sure clock is enabled early for console] Signed-off-by: David Brownell Signed-off-by: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/atmel_serial.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 61fb8b6d19af..d5efd6c77904 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1258,6 +1258,8 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, atmel_port->clk = clk_get(&pdev->dev, "usart"); clk_enable(atmel_port->clk); port->uartclk = clk_get_rate(atmel_port->clk); + clk_disable(atmel_port->clk); + /* only enable clock when USART is in use */ } atmel_port->use_dma_rx = data->use_dma_rx; @@ -1379,6 +1381,8 @@ static int __init atmel_console_setup(struct console *co, char *options) return -ENODEV; } + clk_enable(atmel_ports[co->index].clk); + UART_PUT_IDR(port, -1); UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); @@ -1403,7 +1407,7 @@ static struct console atmel_console = { .data = &atmel_uart, }; -#define ATMEL_CONSOLE_DEVICE &atmel_console +#define ATMEL_CONSOLE_DEVICE (&atmel_console) /* * Early console initialization (before VM subsystem initialized). @@ -1534,6 +1538,15 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) if (ret) goto err_add_port; + if (atmel_is_console_port(&port->uart) + && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) { + /* + * The serial core enabled the clock for us, so undo + * the clk_enable() in atmel_console_setup() + */ + clk_disable(port->clk); + } + device_init_wakeup(&pdev->dev, 1); platform_set_drvdata(pdev, port); @@ -1544,7 +1557,6 @@ err_add_port: port->rx_ring.buf = NULL; err_alloc_ring: if (!atmel_is_console_port(&port->uart)) { - clk_disable(port->clk); clk_put(port->clk); port->clk = NULL; } @@ -1568,7 +1580,6 @@ static int __devexit atmel_serial_remove(struct platform_device *pdev) /* "port" is allocated statically, so we shouldn't free it */ - clk_disable(atmel_port->clk); clk_put(atmel_port->clk); return ret; -- cgit v1.2.3 From 80bb26d4062657c52862d1b112beead47ff9b793 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Thu, 6 Nov 2008 12:53:41 -0800 Subject: rtc-cmos: fix boot log message -rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs +rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Signed-off-by: Frans Pop Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-cmos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 5549231179a2..6cf8e282338f 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -794,7 +794,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) goto cleanup2; } - pr_info("%s: alarms up to one %s%s, %zd bytes nvram, %s irqs\n", + pr_info("%s: alarms up to one %s%s, %zd bytes nvram%s\n", cmos_rtc.rtc->dev.bus_id, is_valid_irq(rtc_irq) ? (cmos_rtc.mon_alrm -- cgit v1.2.3 From c1dfda399ace020126547e7d454ba94edc8c8797 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Thu, 6 Nov 2008 12:53:42 -0800 Subject: SAM9 watchdog: update for moved headers The architecture header files were recently moved from include/asm-arm/mach-at91/ to arch/arm/mach-at91/include/mach/. The SAM9 watchdog driver still includes a header from the old location. Signed-off-by: Andrew Victor Cc: Wim Van Sebroeck Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/watchdog/at91sam9_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index b4babfc31586..b1da287f90ec 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -30,7 +30,7 @@ #include #include -#include +#include #define DRV_NAME "AT91SAM9 Watchdog" -- cgit v1.2.3 From 8986ab59631b1f2e82ac820c8fd76a34462915ca Mon Sep 17 00:00:00 2001 From: Bart Trojanowski Date: Thu, 6 Nov 2008 12:53:44 -0800 Subject: fat: document additional vfat mount options While debugging a sync mount regression on vfat I noticed that there were mount options parsed by the driver that were not documented. [hirofumi@mail.parknet.co.jp: fix some parts] Signed-off-by: Bart Trojanowski Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/vfat.txt | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index bbac4f1d9056..dc9dc73d7d38 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -8,6 +8,12 @@ if you want to format from within Linux. VFAT MOUNT OPTIONS ---------------------------------------------------------------------- +uid=### -- Set the owner of all files on this filesystem. + The default is the uid of current process. + +gid=### -- Set the group of all files on this filesystem. + The default is the gid of current process. + umask=### -- The permission mask (for files and directories, see umask(1)). The default is the umask of current process. @@ -36,7 +42,7 @@ codepage=### -- Sets the codepage number for converting to shortname characters on FAT filesystem. By default, FAT_DEFAULT_CODEPAGE setting is used. -iocharset=name -- Character set to use for converting between the +iocharset= -- Character set to use for converting between the encoding is used for user visible filename and 16 bit Unicode characters. Long filenames are stored on disk in Unicode format, but Unix for the most part doesn't @@ -86,6 +92,8 @@ check=s|r|n -- Case sensitivity checking setting. r: relaxed, case insensitive n: normal, default setting, currently case insensitive +nocase -- This was deprecated for vfat. Use shortname=win95 instead. + shortname=lower|win95|winnt|mixed -- Shortname display/create setting. lower: convert to lowercase for display, @@ -99,11 +107,23 @@ shortname=lower|win95|winnt|mixed tz=UTC -- Interpret timestamps as UTC rather than local time. This option disables the conversion of timestamps between local time (as used by Windows on FAT) and UTC - (which Linux uses internally). This is particuluarly + (which Linux uses internally). This is particularly useful when mounting devices (like digital cameras) that are set to UTC in order to avoid the pitfalls of local time. +showexec -- If set, the execute permission bits of the file will be + allowed only if the extension part of the name is .EXE, + .COM, or .BAT. Not set by default. + +debug -- Can be set, but unused by the current implementation. + +sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as + IMMUTABLE flag on Linux. Not set by default. + +flush -- If set, the filesystem will try to flush to disk more + early than normal. Not set by default. + : 0,1,yes,no,true,false TODO -- cgit v1.2.3 From 990e194e69009028e029b7d25da68c38241ec4f0 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:45 -0800 Subject: fat: move fs/vfat/* and fs/msdos/* to fs/fat This just moves those files, but change link order from MSDOS, VFAT to VFAT, MSDOS. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/Makefile | 2 - fs/fat/Makefile | 6 +- fs/fat/namei_msdos.c | 702 +++++++++++++++++++++++++++++++++ fs/fat/namei_vfat.c | 1055 ++++++++++++++++++++++++++++++++++++++++++++++++++ fs/msdos/Makefile | 7 - fs/msdos/namei.c | 702 --------------------------------- fs/vfat/Makefile | 7 - fs/vfat/namei.c | 1055 -------------------------------------------------- 8 files changed, 1762 insertions(+), 1774 deletions(-) create mode 100644 fs/fat/namei_msdos.c create mode 100644 fs/fat/namei_vfat.c delete mode 100644 fs/msdos/Makefile delete mode 100644 fs/msdos/namei.c delete mode 100644 fs/vfat/Makefile delete mode 100644 fs/vfat/namei.c diff --git a/fs/Makefile b/fs/Makefile index 2168c902d5ca..d9f8afe6f0c4 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -81,8 +81,6 @@ obj-$(CONFIG_HUGETLBFS) += hugetlbfs/ obj-$(CONFIG_CODA_FS) += coda/ obj-$(CONFIG_MINIX_FS) += minix/ obj-$(CONFIG_FAT_FS) += fat/ -obj-$(CONFIG_MSDOS_FS) += msdos/ -obj-$(CONFIG_VFAT_FS) += vfat/ obj-$(CONFIG_BFS_FS) += bfs/ obj-$(CONFIG_ISO9660_FS) += isofs/ obj-$(CONFIG_HFSPLUS_FS) += hfsplus/ # Before hfs to find wrapped HFS+ diff --git a/fs/fat/Makefile b/fs/fat/Makefile index bfb5f06cf2c8..e06190322c1c 100644 --- a/fs/fat/Makefile +++ b/fs/fat/Makefile @@ -3,5 +3,9 @@ # obj-$(CONFIG_FAT_FS) += fat.o +obj-$(CONFIG_VFAT_FS) += vfat.o +obj-$(CONFIG_MSDOS_FS) += msdos.o -fat-objs := cache.o dir.o fatent.o file.o inode.o misc.o +fat-y := cache.o dir.o fatent.o file.o inode.o misc.o +vfat-y := namei_vfat.o +msdos-y := namei_msdos.o diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c new file mode 100644 index 000000000000..e844b9809d27 --- /dev/null +++ b/fs/fat/namei_msdos.c @@ -0,0 +1,702 @@ +/* + * linux/fs/msdos/namei.c + * + * Written 1992,1993 by Werner Almesberger + * Hidden files 1995 by Albert Cahalan + * Rewritten for constant inumbers 1999 by Al Viro + */ + +#include +#include +#include +#include +#include + +/* Characters that are undesirable in an MS-DOS file name */ +static unsigned char bad_chars[] = "*?<>|\""; +static unsigned char bad_if_strict[] = "+=,; "; + +/***** Formats an MS-DOS file name. Rejects invalid names. */ +static int msdos_format_name(const unsigned char *name, int len, + unsigned char *res, struct fat_mount_options *opts) + /* + * name is the proposed name, len is its length, res is + * the resulting name, opts->name_check is either (r)elaxed, + * (n)ormal or (s)trict, opts->dotsOK allows dots at the + * beginning of name (for hidden files) + */ +{ + unsigned char *walk; + unsigned char c; + int space; + + if (name[0] == '.') { /* dotfile because . and .. already done */ + if (opts->dotsOK) { + /* Get rid of dot - test for it elsewhere */ + name++; + len--; + } else + return -EINVAL; + } + /* + * disallow names that _really_ start with a dot + */ + space = 1; + c = 0; + for (walk = res; len && walk - res < 8; walk++) { + c = *name++; + len--; + if (opts->name_check != 'r' && strchr(bad_chars, c)) + return -EINVAL; + if (opts->name_check == 's' && strchr(bad_if_strict, c)) + return -EINVAL; + if (c >= 'A' && c <= 'Z' && opts->name_check == 's') + return -EINVAL; + if (c < ' ' || c == ':' || c == '\\') + return -EINVAL; + /* + * 0xE5 is legal as a first character, but we must substitute + * 0x05 because 0xE5 marks deleted files. Yes, DOS really + * does this. + * It seems that Microsoft hacked DOS to support non-US + * characters after the 0xE5 character was already in use to + * mark deleted files. + */ + if ((res == walk) && (c == 0xE5)) + c = 0x05; + if (c == '.') + break; + space = (c == ' '); + *walk = (!opts->nocase && c >= 'a' && c <= 'z') ? c - 32 : c; + } + if (space) + return -EINVAL; + if (opts->name_check == 's' && len && c != '.') { + c = *name++; + len--; + if (c != '.') + return -EINVAL; + } + while (c != '.' && len--) + c = *name++; + if (c == '.') { + while (walk - res < 8) + *walk++ = ' '; + while (len > 0 && walk - res < MSDOS_NAME) { + c = *name++; + len--; + if (opts->name_check != 'r' && strchr(bad_chars, c)) + return -EINVAL; + if (opts->name_check == 's' && + strchr(bad_if_strict, c)) + return -EINVAL; + if (c < ' ' || c == ':' || c == '\\') + return -EINVAL; + if (c == '.') { + if (opts->name_check == 's') + return -EINVAL; + break; + } + if (c >= 'A' && c <= 'Z' && opts->name_check == 's') + return -EINVAL; + space = c == ' '; + if (!opts->nocase && c >= 'a' && c <= 'z') + *walk++ = c - 32; + else + *walk++ = c; + } + if (space) + return -EINVAL; + if (opts->name_check == 's' && len) + return -EINVAL; + } + while (walk - res < MSDOS_NAME) + *walk++ = ' '; + + return 0; +} + +/***** Locates a directory entry. Uses unformatted name. */ +static int msdos_find(struct inode *dir, const unsigned char *name, int len, + struct fat_slot_info *sinfo) +{ + struct msdos_sb_info *sbi = MSDOS_SB(dir->i_sb); + unsigned char msdos_name[MSDOS_NAME]; + int err; + + err = msdos_format_name(name, len, msdos_name, &sbi->options); + if (err) + return -ENOENT; + + err = fat_scan(dir, msdos_name, sinfo); + if (!err && sbi->options.dotsOK) { + if (name[0] == '.') { + if (!(sinfo->de->attr & ATTR_HIDDEN)) + err = -ENOENT; + } else { + if (sinfo->de->attr & ATTR_HIDDEN) + err = -ENOENT; + } + if (err) + brelse(sinfo->bh); + } + return err; +} + +/* + * Compute the hash for the msdos name corresponding to the dentry. + * Note: if the name is invalid, we leave the hash code unchanged so + * that the existing dentry can be used. The msdos fs routines will + * return ENOENT or EINVAL as appropriate. + */ +static int msdos_hash(struct dentry *dentry, struct qstr *qstr) +{ + struct fat_mount_options *options = &MSDOS_SB(dentry->d_sb)->options; + unsigned char msdos_name[MSDOS_NAME]; + int error; + + error = msdos_format_name(qstr->name, qstr->len, msdos_name, options); + if (!error) + qstr->hash = full_name_hash(msdos_name, MSDOS_NAME); + return 0; +} + +/* + * Compare two msdos names. If either of the names are invalid, + * we fall back to doing the standard name comparison. + */ +static int msdos_cmp(struct dentry *dentry, struct qstr *a, struct qstr *b) +{ + struct fat_mount_options *options = &MSDOS_SB(dentry->d_sb)->options; + unsigned char a_msdos_name[MSDOS_NAME], b_msdos_name[MSDOS_NAME]; + int error; + + error = msdos_format_name(a->name, a->len, a_msdos_name, options); + if (error) + goto old_compare; + error = msdos_format_name(b->name, b->len, b_msdos_name, options); + if (error) + goto old_compare; + error = memcmp(a_msdos_name, b_msdos_name, MSDOS_NAME); +out: + return error; + +old_compare: + error = 1; + if (a->len == b->len) + error = memcmp(a->name, b->name, a->len); + goto out; +} + +static struct dentry_operations msdos_dentry_operations = { + .d_hash = msdos_hash, + .d_compare = msdos_cmp, +}; + +/* + * AV. Wrappers for FAT sb operations. Is it wise? + */ + +/***** Get inode using directory and name */ +static struct dentry *msdos_lookup(struct inode *dir, struct dentry *dentry, + struct nameidata *nd) +{ + struct super_block *sb = dir->i_sb; + struct fat_slot_info sinfo; + struct inode *inode = NULL; + int res; + + dentry->d_op = &msdos_dentry_operations; + + lock_super(sb); + res = msdos_find(dir, dentry->d_name.name, dentry->d_name.len, &sinfo); + if (res == -ENOENT) + goto add; + if (res < 0) + goto out; + inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); + brelse(sinfo.bh); + if (IS_ERR(inode)) { + res = PTR_ERR(inode); + goto out; + } +add: + res = 0; + dentry = d_splice_alias(inode, dentry); + if (dentry) + dentry->d_op = &msdos_dentry_operations; +out: + unlock_super(sb); + if (!res) + return dentry; + return ERR_PTR(res); +} + +/***** Creates a directory entry (name is already formatted). */ +static int msdos_add_entry(struct inode *dir, const unsigned char *name, + int is_dir, int is_hid, int cluster, + struct timespec *ts, struct fat_slot_info *sinfo) +{ + struct msdos_sb_info *sbi = MSDOS_SB(dir->i_sb); + struct msdos_dir_entry de; + __le16 time, date; + int err; + + memcpy(de.name, name, MSDOS_NAME); + de.attr = is_dir ? ATTR_DIR : ATTR_ARCH; + if (is_hid) + de.attr |= ATTR_HIDDEN; + de.lcase = 0; + fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc); + de.cdate = de.adate = 0; + de.ctime = 0; + de.ctime_cs = 0; + de.time = time; + de.date = date; + de.start = cpu_to_le16(cluster); + de.starthi = cpu_to_le16(cluster >> 16); + de.size = 0; + + err = fat_add_entries(dir, &de, 1, sinfo); + if (err) + return err; + + dir->i_ctime = dir->i_mtime = *ts; + if (IS_DIRSYNC(dir)) + (void)fat_sync_inode(dir); + else + mark_inode_dirty(dir); + + return 0; +} + +/***** Create a file */ +static int msdos_create(struct inode *dir, struct dentry *dentry, int mode, + struct nameidata *nd) +{ + struct super_block *sb = dir->i_sb; + struct inode *inode = NULL; + struct fat_slot_info sinfo; + struct timespec ts; + unsigned char msdos_name[MSDOS_NAME]; + int err, is_hid; + + lock_super(sb); + + err = msdos_format_name(dentry->d_name.name, dentry->d_name.len, + msdos_name, &MSDOS_SB(sb)->options); + if (err) + goto out; + is_hid = (dentry->d_name.name[0] == '.') && (msdos_name[0] != '.'); + /* Have to do it due to foo vs. .foo conflicts */ + if (!fat_scan(dir, msdos_name, &sinfo)) { + brelse(sinfo.bh); + err = -EINVAL; + goto out; + } + + ts = CURRENT_TIME_SEC; + err = msdos_add_entry(dir, msdos_name, 0, is_hid, 0, &ts, &sinfo); + if (err) + goto out; + inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); + brelse(sinfo.bh); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + goto out; + } + inode->i_mtime = inode->i_atime = inode->i_ctime = ts; + /* timestamp is already written, so mark_inode_dirty() is unneeded. */ + + d_instantiate(dentry, inode); +out: + unlock_super(sb); + if (!err) + err = fat_flush_inodes(sb, dir, inode); + return err; +} + +/***** Remove a directory */ +static int msdos_rmdir(struct inode *dir, struct dentry *dentry) +{ + struct super_block *sb = dir->i_sb; + struct inode *inode = dentry->d_inode; + struct fat_slot_info sinfo; + int err; + + lock_super(sb); + /* + * Check whether the directory is not in use, then check + * whether it is empty. + */ + err = fat_dir_empty(inode); + if (err) + goto out; + err = msdos_find(dir, dentry->d_name.name, dentry->d_name.len, &sinfo); + if (err) + goto out; + + err = fat_remove_entries(dir, &sinfo); /* and releases bh */ + if (err) + goto out; + drop_nlink(dir); + + clear_nlink(inode); + inode->i_ctime = CURRENT_TIME_SEC; + fat_detach(inode); +out: + unlock_super(sb); + if (!err) + err = fat_flush_inodes(sb, dir, inode); + + return err; +} + +/***** Make a directory */ +static int msdos_mkdir(struct inode *dir, struct dentry *dentry, int mode) +{ + struct super_block *sb = dir->i_sb; + struct fat_slot_info sinfo; + struct inode *inode; + unsigned char msdos_name[MSDOS_NAME]; + struct timespec ts; + int err, is_hid, cluster; + + lock_super(sb); + + err = msdos_format_name(dentry->d_name.name, dentry->d_name.len, + msdos_name, &MSDOS_SB(sb)->options); + if (err) + goto out; + is_hid = (dentry->d_name.name[0] == '.') && (msdos_name[0] != '.'); + /* foo vs .foo situation */ + if (!fat_scan(dir, msdos_name, &sinfo)) { + brelse(sinfo.bh); + err = -EINVAL; + goto out; + } + + ts = CURRENT_TIME_SEC; + cluster = fat_alloc_new_dir(dir, &ts); + if (cluster < 0) { + err = cluster; + goto out; + } + err = msdos_add_entry(dir, msdos_name, 1, is_hid, cluster, &ts, &sinfo); + if (err) + goto out_free; + inc_nlink(dir); + + inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); + brelse(sinfo.bh); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + /* the directory was completed, just return a error */ + goto out; + } + inode->i_nlink = 2; + inode->i_mtime = inode->i_atime = inode->i_ctime = ts; + /* timestamp is already written, so mark_inode_dirty() is unneeded. */ + + d_instantiate(dentry, inode); + + unlock_super(sb); + fat_flush_inodes(sb, dir, inode); + return 0; + +out_free: + fat_free_clusters(dir, cluster); +out: + unlock_super(sb); + return err; +} + +/***** Unlink a file */ +static int msdos_unlink(struct inode *dir, struct dentry *dentry) +{ + struct inode *inode = dentry->d_inode; + struct super_block *sb= inode->i_sb; + struct fat_slot_info sinfo; + int err; + + lock_super(sb); + err = msdos_find(dir, dentry->d_name.name, dentry->d_name.len, &sinfo); + if (err) + goto out; + + err = fat_remove_entries(dir, &sinfo); /* and releases bh */ + if (err) + goto out; + clear_nlink(inode); + inode->i_ctime = CURRENT_TIME_SEC; + fat_detach(inode); +out: + unlock_super(sb); + if (!err) + err = fat_flush_inodes(sb, dir, inode); + + return err; +} + +static int do_msdos_rename(struct inode *old_dir, unsigned char *old_name, + struct dentry *old_dentry, + struct inode *new_dir, unsigned char *new_name, + struct dentry *new_dentry, int is_hid) +{ + struct buffer_head *dotdot_bh; + struct msdos_dir_entry *dotdot_de; + struct inode *old_inode, *new_inode; + struct fat_slot_info old_sinfo, sinfo; + struct timespec ts; + loff_t dotdot_i_pos, new_i_pos; + int err, old_attrs, is_dir, update_dotdot, corrupt = 0; + + old_sinfo.bh = sinfo.bh = dotdot_bh = NULL; + old_inode = old_dentry->d_inode; + new_inode = new_dentry->d_inode; + + err = fat_scan(old_dir, old_name, &old_sinfo); + if (err) { + err = -EIO; + goto out; + } + + is_dir = S_ISDIR(old_inode->i_mode); + update_dotdot = (is_dir && old_dir != new_dir); + if (update_dotdot) { + if (fat_get_dotdot_entry(old_inode, &dotdot_bh, &dotdot_de, + &dotdot_i_pos) < 0) { + err = -EIO; + goto out; + } + } + + old_attrs = MSDOS_I(old_inode)->i_attrs; + err = fat_scan(new_dir, new_name, &sinfo); + if (!err) { + if (!new_inode) { + /* "foo" -> ".foo" case. just change the ATTR_HIDDEN */ + if (sinfo.de != old_sinfo.de) { + err = -EINVAL; + goto out; + } + if (is_hid) + MSDOS_I(old_inode)->i_attrs |= ATTR_HIDDEN; + else + MSDOS_I(old_inode)->i_attrs &= ~ATTR_HIDDEN; + if (IS_DIRSYNC(old_dir)) { + err = fat_sync_inode(old_inode); + if (err) { + MSDOS_I(old_inode)->i_attrs = old_attrs; + goto out; + } + } else + mark_inode_dirty(old_inode); + + old_dir->i_version++; + old_dir->i_ctime = old_dir->i_mtime = CURRENT_TIME_SEC; + if (IS_DIRSYNC(old_dir)) + (void)fat_sync_inode(old_dir); + else + mark_inode_dirty(old_dir); + goto out; + } + } + + ts = CURRENT_TIME_SEC; + if (new_inode) { + if (err) + goto out; + if (is_dir) { + err = fat_dir_empty(new_inode); + if (err) + goto out; + } + new_i_pos = MSDOS_I(new_inode)->i_pos; + fat_detach(new_inode); + } else { + err = msdos_add_entry(new_dir, new_name, is_dir, is_hid, 0, + &ts, &sinfo); + if (err) + goto out; + new_i_pos = sinfo.i_pos; + } + new_dir->i_version++; + + fat_detach(old_inode); + fat_attach(old_inode, new_i_pos); + if (is_hid) + MSDOS_I(old_inode)->i_attrs |= ATTR_HIDDEN; + else + MSDOS_I(old_inode)->i_attrs &= ~ATTR_HIDDEN; + if (IS_DIRSYNC(new_dir)) { + err = fat_sync_inode(old_inode); + if (err) + goto error_inode; + } else + mark_inode_dirty(old_inode); + + if (update_dotdot) { + int start = MSDOS_I(new_dir)->i_logstart; + dotdot_de->start = cpu_to_le16(start); + dotdot_de->starthi = cpu_to_le16(start >> 16); + mark_buffer_dirty(dotdot_bh); + if (IS_DIRSYNC(new_dir)) { + err = sync_dirty_buffer(dotdot_bh); + if (err) + goto error_dotdot; + } + drop_nlink(old_dir); + if (!new_inode) + inc_nlink(new_dir); + } + + err = fat_remove_entries(old_dir, &old_sinfo); /* and releases bh */ + old_sinfo.bh = NULL; + if (err) + goto error_dotdot; + old_dir->i_version++; + old_dir->i_ctime = old_dir->i_mtime = ts; + if (IS_DIRSYNC(old_dir)) + (void)fat_sync_inode(old_dir); + else + mark_inode_dirty(old_dir); + + if (new_inode) { + drop_nlink(new_inode); + if (is_dir) + drop_nlink(new_inode); + new_inode->i_ctime = ts; + } +out: + brelse(sinfo.bh); + brelse(dotdot_bh); + brelse(old_sinfo.bh); + return err; + +error_dotdot: + /* data cluster is shared, serious corruption */ + corrupt = 1; + + if (update_dotdot) { + int start = MSDOS_I(old_dir)->i_logstart; + dotdot_de->start = cpu_to_le16(start); + dotdot_de->starthi = cpu_to_le16(start >> 16); + mark_buffer_dirty(dotdot_bh); + corrupt |= sync_dirty_buffer(dotdot_bh); + } +error_inode: + fat_detach(old_inode); + fat_attach(old_inode, old_sinfo.i_pos); + MSDOS_I(old_inode)->i_attrs = old_attrs; + if (new_inode) { + fat_attach(new_inode, new_i_pos); + if (corrupt) + corrupt |= fat_sync_inode(new_inode); + } else { + /* + * If new entry was not sharing the data cluster, it + * shouldn't be serious corruption. + */ + int err2 = fat_remove_entries(new_dir, &sinfo); + if (corrupt) + corrupt |= err2; + sinfo.bh = NULL; + } + if (corrupt < 0) { + fat_fs_panic(new_dir->i_sb, + "%s: Filesystem corrupted (i_pos %lld)", + __func__, sinfo.i_pos); + } + goto out; +} + +/***** Rename, a wrapper for rename_same_dir & rename_diff_dir */ +static int msdos_rename(struct inode *old_dir, struct dentry *old_dentry, + struct inode *new_dir, struct dentry *new_dentry) +{ + struct super_block *sb = old_dir->i_sb; + unsigned char old_msdos_name[MSDOS_NAME], new_msdos_name[MSDOS_NAME]; + int err, is_hid; + + lock_super(sb); + + err = msdos_format_name(old_dentry->d_name.name, + old_dentry->d_name.len, old_msdos_name, + &MSDOS_SB(old_dir->i_sb)->options); + if (err) + goto out; + err = msdos_format_name(new_dentry->d_name.name, + new_dentry->d_name.len, new_msdos_name, + &MSDOS_SB(new_dir->i_sb)->options); + if (err) + goto out; + + is_hid = + (new_dentry->d_name.name[0] == '.') && (new_msdos_name[0] != '.'); + + err = do_msdos_rename(old_dir, old_msdos_name, old_dentry, + new_dir, new_msdos_name, new_dentry, is_hid); +out: + unlock_super(sb); + if (!err) + err = fat_flush_inodes(sb, old_dir, new_dir); + return err; +} + +static const struct inode_operations msdos_dir_inode_operations = { + .create = msdos_create, + .lookup = msdos_lookup, + .unlink = msdos_unlink, + .mkdir = msdos_mkdir, + .rmdir = msdos_rmdir, + .rename = msdos_rename, + .setattr = fat_setattr, + .getattr = fat_getattr, +}; + +static int msdos_fill_super(struct super_block *sb, void *data, int silent) +{ + int res; + + res = fat_fill_super(sb, data, silent, &msdos_dir_inode_operations, 0); + if (res) + return res; + + sb->s_flags |= MS_NOATIME; + sb->s_root->d_op = &msdos_dentry_operations; + return 0; +} + +static int msdos_get_sb(struct file_system_type *fs_type, + int flags, const char *dev_name, + void *data, struct vfsmount *mnt) +{ + return get_sb_bdev(fs_type, flags, dev_name, data, msdos_fill_super, + mnt); +} + +static struct file_system_type msdos_fs_type = { + .owner = THIS_MODULE, + .name = "msdos", + .get_sb = msdos_get_sb, + .kill_sb = kill_block_super, + .fs_flags = FS_REQUIRES_DEV, +}; + +static int __init init_msdos_fs(void) +{ + return register_filesystem(&msdos_fs_type); +} + +static void __exit exit_msdos_fs(void) +{ + unregister_filesystem(&msdos_fs_type); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Werner Almesberger"); +MODULE_DESCRIPTION("MS-DOS filesystem support"); + +module_init(init_msdos_fs) +module_exit(exit_msdos_fs) diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c new file mode 100644 index 000000000000..155c10b4adbd --- /dev/null +++ b/fs/fat/namei_vfat.c @@ -0,0 +1,1055 @@ +/* + * linux/fs/vfat/namei.c + * + * Written 1992,1993 by Werner Almesberger + * + * Windows95/Windows NT compatible extended MSDOS filesystem + * by Gordon Chaffee Copyright (C) 1995. Send bug reports for the + * VFAT filesystem to . Specify + * what file operation caused you trouble and if you can duplicate + * the problem, send a script that demonstrates it. + * + * Short name translation 1999, 2001 by Wolfram Pienkoss + * + * Support Multibyte characters and cleanup by + * OGAWA Hirofumi + */ + +#include + +#include +#include +#include +#include +#include +#include +#include + +static int vfat_revalidate(struct dentry *dentry, struct nameidata *nd) +{ + int ret = 1; + + if (!dentry->d_inode && + nd && !(nd->flags & LOOKUP_CONTINUE) && (nd->flags & LOOKUP_CREATE)) + /* + * negative dentry is dropped, in order to make sure + * to use the name which a user desires if this is + * create path. + */ + ret = 0; + else { + spin_lock(&dentry->d_lock); + if (dentry->d_time != dentry->d_parent->d_inode->i_version) + ret = 0; + spin_unlock(&dentry->d_lock); + } + return ret; +} + +/* returns the length of a struct qstr, ignoring trailing dots */ +static unsigned int vfat_striptail_len(struct qstr *qstr) +{ + unsigned int len = qstr->len; + + while (len && qstr->name[len - 1] == '.') + len--; + return len; +} + +/* + * Compute the hash for the vfat name corresponding to the dentry. + * Note: if the name is invalid, we leave the hash code unchanged so + * that the existing dentry can be used. The vfat fs routines will + * return ENOENT or EINVAL as appropriate. + */ +static int vfat_hash(struct dentry *dentry, struct qstr *qstr) +{ + qstr->hash = full_name_hash(qstr->name, vfat_striptail_len(qstr)); + return 0; +} + +/* + * Compute the hash for the vfat name corresponding to the dentry. + * Note: if the name is invalid, we leave the hash code unchanged so + * that the existing dentry can be used. The vfat fs routines will + * return ENOENT or EINVAL as appropriate. + */ +static int vfat_hashi(struct dentry *dentry, struct qstr *qstr) +{ + struct nls_table *t = MSDOS_SB(dentry->d_inode->i_sb)->nls_io; + const unsigned char *name; + unsigned int len; + unsigned long hash; + + name = qstr->name; + len = vfat_striptail_len(qstr); + + hash = init_name_hash(); + while (len--) + hash = partial_name_hash(nls_tolower(t, *name++), hash); + qstr->hash = end_name_hash(hash); + + return 0; +} + +/* + * Case insensitive compare of two vfat names. + */ +static int vfat_cmpi(struct dentry *dentry, struct qstr *a, struct qstr *b) +{ + struct nls_table *t = MSDOS_SB(dentry->d_inode->i_sb)->nls_io; + unsigned int alen, blen; + + /* A filename cannot end in '.' or we treat it like it has none */ + alen = vfat_striptail_len(a); + blen = vfat_striptail_len(b); + if (alen == blen) { + if (nls_strnicmp(t, a->name, b->name, alen) == 0) + return 0; + } + return 1; +} + +/* + * Case sensitive compare of two vfat names. + */ +static int vfat_cmp(struct dentry *dentry, struct qstr *a, struct qstr *b) +{ + unsigned int alen, blen; + + /* A filename cannot end in '.' or we treat it like it has none */ + alen = vfat_striptail_len(a); + blen = vfat_striptail_len(b); + if (alen == blen) { + if (strncmp(a->name, b->name, alen) == 0) + return 0; + } + return 1; +} + +static struct dentry_operations vfat_dentry_ops[4] = { + { + .d_hash = vfat_hashi, + .d_compare = vfat_cmpi, + }, + { + .d_revalidate = vfat_revalidate, + .d_hash = vfat_hashi, + .d_compare = vfat_cmpi, + }, + { + .d_hash = vfat_hash, + .d_compare = vfat_cmp, + }, + { + .d_revalidate = vfat_revalidate, + .d_hash = vfat_hash, + .d_compare = vfat_cmp, + } +}; + +/* Characters that are undesirable in an MS-DOS file name */ + +static inline wchar_t vfat_bad_char(wchar_t w) +{ + return (w < 0x0020) + || (w == '*') || (w == '?') || (w == '<') || (w == '>') + || (w == '|') || (w == '"') || (w == ':') || (w == '/') + || (w == '\\'); +} + +static inline wchar_t vfat_replace_char(wchar_t w) +{ + return (w == '[') || (w == ']') || (w == ';') || (w == ',') + || (w == '+') || (w == '='); +} + +static wchar_t vfat_skip_char(wchar_t w) +{ + return (w == '.') || (w == ' '); +} + +static inline int vfat_is_used_badchars(const wchar_t *s, int len) +{ + int i; + + for (i = 0; i < len; i++) + if (vfat_bad_char(s[i])) + return -EINVAL; + + if (s[i - 1] == ' ') /* last character cannot be space */ + return -EINVAL; + + return 0; +} + +static int vfat_find_form(struct inode *dir, unsigned char *name) +{ + struct fat_slot_info sinfo; + int err = fat_scan(dir, name, &sinfo); + if (err) + return -ENOENT; + brelse(sinfo.bh); + return 0; +} + +/* + * 1) Valid characters for the 8.3 format alias are any combination of + * letters, uppercase alphabets, digits, any of the + * following special characters: + * $ % ' ` - @ { } ~ ! # ( ) & _ ^ + * In this case Longfilename is not stored in disk. + * + * WinNT's Extension: + * File name and extension name is contain uppercase/lowercase + * only. And it is expressed by CASE_LOWER_BASE and CASE_LOWER_EXT. + * + * 2) File name is 8.3 format, but it contain the uppercase and + * lowercase char, muliti bytes char, etc. In this case numtail is not + * added, but Longfilename is stored. + * + * 3) When the one except for the above, or the following special + * character are contained: + * . [ ] ; , + = + * numtail is added, and Longfilename must be stored in disk . + */ +struct shortname_info { + unsigned char lower:1, + upper:1, + valid:1; +}; +#define INIT_SHORTNAME_INFO(x) do { \ + (x)->lower = 1; \ + (x)->upper = 1; \ + (x)->valid = 1; \ +} while (0) + +static inline int to_shortname_char(struct nls_table *nls, + unsigned char *buf, int buf_size, + wchar_t *src, struct shortname_info *info) +{ + int len; + + if (vfat_skip_char(*src)) { + info->valid = 0; + return 0; + } + if (vfat_replace_char(*src)) { + info->valid = 0; + buf[0] = '_'; + return 1; + } + + len = nls->uni2char(*src, buf, buf_size); + if (len <= 0) { + info->valid = 0; + buf[0] = '_'; + len = 1; + } else if (len == 1) { + unsigned char prev = buf[0]; + + if (buf[0] >= 0x7F) { + info->lower = 0; + info->upper = 0; + } + + buf[0] = nls_toupper(nls, buf[0]); + if (isalpha(buf[0])) { + if (buf[0] == prev) + info->lower = 0; + else + info->upper = 0; + } + } else { + info->lower = 0; + info->upper = 0; + } + + return len; +} + +/* + * Given a valid longname, create a unique shortname. Make sure the + * shortname does not exist + * Returns negative number on error, 0 for a normal + * return, and 1 for valid shortname + */ +static int vfat_create_shortname(struct inode *dir, struct nls_table *nls, + wchar_t *uname, int ulen, + unsigned char *name_res, unsigned char *lcase) +{ + struct fat_mount_options *opts = &MSDOS_SB(dir->i_sb)->options; + wchar_t *ip, *ext_start, *end, *name_start; + unsigned char base[9], ext[4], buf[8], *p; + unsigned char charbuf[NLS_MAX_CHARSET_SIZE]; + int chl, chi; + int sz = 0, extlen, baselen, i, numtail_baselen, numtail2_baselen; + int is_shortname; + struct shortname_info base_info, ext_info; + + is_shortname = 1; + INIT_SHORTNAME_INFO(&base_info); + INIT_SHORTNAME_INFO(&ext_info); + + /* Now, we need to create a shortname from the long name */ + ext_start = end = &uname[ulen]; + while (--ext_start >= uname) { + if (*ext_start == 0x002E) { /* is `.' */ + if (ext_start == end - 1) { + sz = ulen; + ext_start = NULL; + } + break; + } + } + + if (ext_start == uname - 1) { + sz = ulen; + ext_start = NULL; + } else if (ext_start) { + /* + * Names which start with a dot could be just + * an extension eg. "...test". In this case Win95 + * uses the extension as the name and sets no extension. + */ + name_start = &uname[0]; + while (name_start < ext_start) { + if (!vfat_skip_char(*name_start)) + break; + name_start++; + } + if (name_start != ext_start) { + sz = ext_start - uname; + ext_start++; + } else { + sz = ulen; + ext_start = NULL; + } + } + + numtail_baselen = 6; + numtail2_baselen = 2; + for (baselen = i = 0, p = base, ip = uname; i < sz; i++, ip++) { + chl = to_shortname_char(nls, charbuf, sizeof(charbuf), + ip, &base_info); + if (chl == 0) + continue; + + if (baselen < 2 && (baselen + chl) > 2) + numtail2_baselen = baselen; + if (baselen < 6 && (baselen + chl) > 6) + numtail_baselen = baselen; + for (chi = 0; chi < chl; chi++) { + *p++ = charbuf[chi]; + baselen++; + if (baselen >= 8) + break; + } + if (baselen >= 8) { + if ((chi < chl - 1) || (ip + 1) - uname < sz) + is_shortname = 0; + break; + } + } + if (baselen == 0) { + return -EINVAL; + } + + extlen = 0; + if (ext_start) { + for (p = ext, ip = ext_start; extlen < 3 && ip < end; ip++) { + chl = to_shortname_char(nls, charbuf, sizeof(charbuf), + ip, &ext_info); + if (chl == 0) + continue; + + if ((extlen + chl) > 3) { + is_shortname = 0; + break; + } + for (chi = 0; chi < chl; chi++) { + *p++ = charbuf[chi]; + extlen++; + } + if (extlen >= 3) { + if (ip + 1 != end) + is_shortname = 0; + break; + } + } + } + ext[extlen] = '\0'; + base[baselen] = '\0'; + + /* Yes, it can happen. ".\xe5" would do it. */ + if (base[0] == DELETED_FLAG) + base[0] = 0x05; + + /* OK, at this point we know that base is not longer than 8 symbols, + * ext is not longer than 3, base is nonempty, both don't contain + * any bad symbols (lowercase transformed to uppercase). + */ + + memset(name_res, ' ', MSDOS_NAME); + memcpy(name_res, base, baselen); + memcpy(name_res + 8, ext, extlen); + *lcase = 0; + if (is_shortname && base_info.valid && ext_info.valid) { + if (vfat_find_form(dir, name_res) == 0) + return -EEXIST; + + if (opts->shortname & VFAT_SFN_CREATE_WIN95) { + return (base_info.upper && ext_info.upper); + } else if (opts->shortname & VFAT_SFN_CREATE_WINNT) { + if ((base_info.upper || base_info.lower) && + (ext_info.upper || ext_info.lower)) { + if (!base_info.upper && base_info.lower) + *lcase |= CASE_LOWER_BASE; + if (!ext_info.upper && ext_info.lower) + *lcase |= CASE_LOWER_EXT; + return 1; + } + return 0; + } else { + BUG(); + } + } + + if (opts->numtail == 0) + if (vfat_find_form(dir, name_res) < 0) + return 0; + + /* + * Try to find a unique extension. This used to + * iterate through all possibilities sequentially, + * but that gave extremely bad performance. Windows + * only tries a few cases before using random + * values for part of the base. + */ + + if (baselen > 6) { + baselen = numtail_baselen; + name_res[7] = ' '; + } + name_res[baselen] = '~'; + for (i = 1; i < 10; i++) { + name_res[baselen + 1] = i + '0'; + if (vfat_find_form(dir, name_res) < 0) + return 0; + } + + i = jiffies & 0xffff; + sz = (jiffies >> 16) & 0x7; + if (baselen > 2) { + baselen = numtail2_baselen; + name_res[7] = ' '; + } + name_res[baselen + 4] = '~'; + name_res[baselen + 5] = '1' + sz; + while (1) { + sprintf(buf, "%04X", i); + memcpy(&name_res[baselen], buf, 4); + if (vfat_find_form(dir, name_res) < 0) + break; + i -= 11; + } + return 0; +} + +/* Translate a string, including coded sequences into Unicode */ +static int +xlate_to_uni(const unsigned char *name, int len, unsigned char *outname, + int *longlen, int *outlen, int escape, int utf8, + struct nls_table *nls) +{ + const unsigned char *ip; + unsigned char nc; + unsigned char *op; + unsigned int ec; + int i, k, fill; + int charlen; + + if (utf8) { + int name_len = strlen(name); + + *outlen = utf8_mbstowcs((wchar_t *)outname, name, PATH_MAX); + + /* + * We stripped '.'s before and set len appropriately, + * but utf8_mbstowcs doesn't care about len + */ + *outlen -= (name_len - len); + + if (*outlen > 255) + return -ENAMETOOLONG; + + op = &outname[*outlen * sizeof(wchar_t)]; + } else { + if (nls) { + for (i = 0, ip = name, op = outname, *outlen = 0; + i < len && *outlen <= 255; + *outlen += 1) + { + if (escape && (*ip == ':')) { + if (i > len - 5) + return -EINVAL; + ec = 0; + for (k = 1; k < 5; k++) { + nc = ip[k]; + ec <<= 4; + if (nc >= '0' && nc <= '9') { + ec |= nc - '0'; + continue; + } + if (nc >= 'a' && nc <= 'f') { + ec |= nc - ('a' - 10); + continue; + } + if (nc >= 'A' && nc <= 'F') { + ec |= nc - ('A' - 10); + continue; + } + return -EINVAL; + } + *op++ = ec & 0xFF; + *op++ = ec >> 8; + ip += 5; + i += 5; + } else { + if ((charlen = nls->char2uni(ip, len - i, (wchar_t *)op)) < 0) + return -EINVAL; + ip += charlen; + i += charlen; + op += 2; + } + } + if (i < len) + return -ENAMETOOLONG; + } else { + for (i = 0, ip = name, op = outname, *outlen = 0; + i < len && *outlen <= 255; + i++, *outlen += 1) + { + *op++ = *ip++; + *op++ = 0; + } + if (i < len) + return -ENAMETOOLONG; + } + } + + *longlen = *outlen; + if (*outlen % 13) { + *op++ = 0; + *op++ = 0; + *outlen += 1; + if (*outlen % 13) { + fill = 13 - (*outlen % 13); + for (i = 0; i < fill; i++) { + *op++ = 0xff; + *op++ = 0xff; + } + *outlen += fill; + } + } + + return 0; +} + +static int vfat_build_slots(struct inode *dir, const unsigned char *name, + int len, int is_dir, int cluster, + struct timespec *ts, + struct msdos_dir_slot *slots, int *nr_slots) +{ + struct msdos_sb_info *sbi = MSDOS_SB(dir->i_sb); + struct fat_mount_options *opts = &sbi->options; + struct msdos_dir_slot *ps; + struct msdos_dir_entry *de; + unsigned char cksum, lcase; + unsigned char msdos_name[MSDOS_NAME]; + wchar_t *uname; + __le16 time, date; + int err, ulen, usize, i; + loff_t offset; + + *nr_slots = 0; + + uname = __getname(); + if (!uname) + return -ENOMEM; + + err = xlate_to_uni(name, len, (unsigned char *)uname, &ulen, &usize, + opts->unicode_xlate, opts->utf8, sbi->nls_io); + if (err) + goto out_free; + + err = vfat_is_used_badchars(uname, ulen); + if (err) + goto out_free; + + err = vfat_create_shortname(dir, sbi->nls_disk, uname, ulen, + msdos_name, &lcase); + if (err < 0) + goto out_free; + else if (err == 1) { + de = (struct msdos_dir_entry *)slots; + err = 0; + goto shortname; + } + + /* build the entry of long file name */ + cksum = fat_checksum(msdos_name); + + *nr_slots = usize / 13; + for (ps = slots, i = *nr_slots; i > 0; i--, ps++) { + ps->id = i; + ps->attr = ATTR_EXT; + ps->reserved = 0; + ps->alias_checksum = cksum; + ps->start = 0; + offset = (i - 1) * 13; + fatwchar_to16(ps->name0_4, uname + offset, 5); + fatwchar_to16(ps->name5_10, uname + offset + 5, 6); + fatwchar_to16(ps->name11_12, uname + offset + 11, 2); + } + slots[0].id |= 0x40; + de = (struct msdos_dir_entry *)ps; + +shortname: + /* build the entry of 8.3 alias name */ + (*nr_slots)++; + memcpy(de->name, msdos_name, MSDOS_NAME); + de->attr = is_dir ? ATTR_DIR : ATTR_ARCH; + de->lcase = lcase; + fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc); + de->time = de->ctime = time; + de->date = de->cdate = de->adate = date; + de->ctime_cs = 0; + de->start = cpu_to_le16(cluster); + de->starthi = cpu_to_le16(cluster >> 16); + de->size = 0; +out_free: + __putname(uname); + return err; +} + +static int vfat_add_entry(struct inode *dir, struct qstr *qname, int is_dir, + int cluster, struct timespec *ts, + struct fat_slot_info *sinfo) +{ + struct msdos_dir_slot *slots; + unsigned int len; + int err, nr_slots; + + len = vfat_striptail_len(qname); + if (len == 0) + return -ENOENT; + + slots = kmalloc(sizeof(*slots) * MSDOS_SLOTS, GFP_NOFS); + if (slots == NULL) + return -ENOMEM; + + err = vfat_build_slots(dir, qname->name, len, is_dir, cluster, ts, + slots, &nr_slots); + if (err) + goto cleanup; + + err = fat_add_entries(dir, slots, nr_slots, sinfo); + if (err) + goto cleanup; + + /* update timestamp */ + dir->i_ctime = dir->i_mtime = dir->i_atime = *ts; + if (IS_DIRSYNC(dir)) + (void)fat_sync_inode(dir); + else + mark_inode_dirty(dir); +cleanup: + kfree(slots); + return err; +} + +static int vfat_find(struct inode *dir, struct qstr *qname, + struct fat_slot_info *sinfo) +{ + unsigned int len = vfat_striptail_len(qname); + if (len == 0) + return -ENOENT; + return fat_search_long(dir, qname->name, len, sinfo); +} + +static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry, + struct nameidata *nd) +{ + struct super_block *sb = dir->i_sb; + struct fat_slot_info sinfo; + struct inode *inode = NULL; + struct dentry *alias; + int err, table; + + lock_super(sb); + table = (MSDOS_SB(sb)->options.name_check == 's') ? 2 : 0; + dentry->d_op = &vfat_dentry_ops[table]; + + err = vfat_find(dir, &dentry->d_name, &sinfo); + if (err) { + table++; + goto error; + } + inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); + brelse(sinfo.bh); + if (IS_ERR(inode)) { + unlock_super(sb); + return ERR_CAST(inode); + } + alias = d_find_alias(inode); + if (alias) { + if (d_invalidate(alias) == 0) + dput(alias); + else { + iput(inode); + unlock_super(sb); + return alias; + } + + } +error: + unlock_super(sb); + dentry->d_op = &vfat_dentry_ops[table]; + dentry->d_time = dentry->d_parent->d_inode->i_version; + dentry = d_splice_alias(inode, dentry); + if (dentry) { + dentry->d_op = &vfat_dentry_ops[table]; + dentry->d_time = dentry->d_parent->d_inode->i_version; + } + return dentry; +} + +static int vfat_create(struct inode *dir, struct dentry *dentry, int mode, + struct nameidata *nd) +{ + struct super_block *sb = dir->i_sb; + struct inode *inode; + struct fat_slot_info sinfo; + struct timespec ts; + int err; + + lock_super(sb); + + ts = CURRENT_TIME_SEC; + err = vfat_add_entry(dir, &dentry->d_name, 0, 0, &ts, &sinfo); + if (err) + goto out; + dir->i_version++; + + inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); + brelse(sinfo.bh); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + goto out; + } + inode->i_version++; + inode->i_mtime = inode->i_atime = inode->i_ctime = ts; + /* timestamp is already written, so mark_inode_dirty() is unneeded. */ + + dentry->d_time = dentry->d_parent->d_inode->i_version; + d_instantiate(dentry, inode); +out: + unlock_super(sb); + return err; +} + +static int vfat_rmdir(struct inode *dir, struct dentry *dentry) +{ + struct inode *inode = dentry->d_inode; + struct super_block *sb = dir->i_sb; + struct fat_slot_info sinfo; + int err; + + lock_super(sb); + + err = fat_dir_empty(inode); + if (err) + goto out; + err = vfat_find(dir, &dentry->d_name, &sinfo); + if (err) + goto out; + + err = fat_remove_entries(dir, &sinfo); /* and releases bh */ + if (err) + goto out; + drop_nlink(dir); + + clear_nlink(inode); + inode->i_mtime = inode->i_atime = CURRENT_TIME_SEC; + fat_detach(inode); +out: + unlock_super(sb); + + return err; +} + +static int vfat_unlink(struct inode *dir, struct dentry *dentry) +{ + struct inode *inode = dentry->d_inode; + struct super_block *sb = dir->i_sb; + struct fat_slot_info sinfo; + int err; + + lock_super(sb); + + err = vfat_find(dir, &dentry->d_name, &sinfo); + if (err) + goto out; + + err = fat_remove_entries(dir, &sinfo); /* and releases bh */ + if (err) + goto out; + clear_nlink(inode); + inode->i_mtime = inode->i_atime = CURRENT_TIME_SEC; + fat_detach(inode); +out: + unlock_super(sb); + + return err; +} + +static int vfat_mkdir(struct inode *dir, struct dentry *dentry, int mode) +{ + struct super_block *sb = dir->i_sb; + struct inode *inode; + struct fat_slot_info sinfo; + struct timespec ts; + int err, cluster; + + lock_super(sb); + + ts = CURRENT_TIME_SEC; + cluster = fat_alloc_new_dir(dir, &ts); + if (cluster < 0) { + err = cluster; + goto out; + } + err = vfat_add_entry(dir, &dentry->d_name, 1, cluster, &ts, &sinfo); + if (err) + goto out_free; + dir->i_version++; + inc_nlink(dir); + + inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); + brelse(sinfo.bh); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + /* the directory was completed, just return a error */ + goto out; + } + inode->i_version++; + inode->i_nlink = 2; + inode->i_mtime = inode->i_atime = inode->i_ctime = ts; + /* timestamp is already written, so mark_inode_dirty() is unneeded. */ + + dentry->d_time = dentry->d_parent->d_inode->i_version; + d_instantiate(dentry, inode); + + unlock_super(sb); + return 0; + +out_free: + fat_free_clusters(dir, cluster); +out: + unlock_super(sb); + return err; +} + +static int vfat_rename(struct inode *old_dir, struct dentry *old_dentry, + struct inode *new_dir, struct dentry *new_dentry) +{ + struct buffer_head *dotdot_bh; + struct msdos_dir_entry *dotdot_de; + struct inode *old_inode, *new_inode; + struct fat_slot_info old_sinfo, sinfo; + struct timespec ts; + loff_t dotdot_i_pos, new_i_pos; + int err, is_dir, update_dotdot, corrupt = 0; + struct super_block *sb = old_dir->i_sb; + + old_sinfo.bh = sinfo.bh = dotdot_bh = NULL; + old_inode = old_dentry->d_inode; + new_inode = new_dentry->d_inode; + lock_super(sb); + err = vfat_find(old_dir, &old_dentry->d_name, &old_sinfo); + if (err) + goto out; + + is_dir = S_ISDIR(old_inode->i_mode); + update_dotdot = (is_dir && old_dir != new_dir); + if (update_dotdot) { + if (fat_get_dotdot_entry(old_inode, &dotdot_bh, &dotdot_de, + &dotdot_i_pos) < 0) { + err = -EIO; + goto out; + } + } + + ts = CURRENT_TIME_SEC; + if (new_inode) { + if (is_dir) { + err = fat_dir_empty(new_inode); + if (err) + goto out; + } + new_i_pos = MSDOS_I(new_inode)->i_pos; + fat_detach(new_inode); + } else { + err = vfat_add_entry(new_dir, &new_dentry->d_name, is_dir, 0, + &ts, &sinfo); + if (err) + goto out; + new_i_pos = sinfo.i_pos; + } + new_dir->i_version++; + + fat_detach(old_inode); + fat_attach(old_inode, new_i_pos); + if (IS_DIRSYNC(new_dir)) { + err = fat_sync_inode(old_inode); + if (err) + goto error_inode; + } else + mark_inode_dirty(old_inode); + + if (update_dotdot) { + int start = MSDOS_I(new_dir)->i_logstart; + dotdot_de->start = cpu_to_le16(start); + dotdot_de->starthi = cpu_to_le16(start >> 16); + mark_buffer_dirty(dotdot_bh); + if (IS_DIRSYNC(new_dir)) { + err = sync_dirty_buffer(dotdot_bh); + if (err) + goto error_dotdot; + } + drop_nlink(old_dir); + if (!new_inode) + inc_nlink(new_dir); + } + + err = fat_remove_entries(old_dir, &old_sinfo); /* and releases bh */ + old_sinfo.bh = NULL; + if (err) + goto error_dotdot; + old_dir->i_version++; + old_dir->i_ctime = old_dir->i_mtime = ts; + if (IS_DIRSYNC(old_dir)) + (void)fat_sync_inode(old_dir); + else + mark_inode_dirty(old_dir); + + if (new_inode) { + drop_nlink(new_inode); + if (is_dir) + drop_nlink(new_inode); + new_inode->i_ctime = ts; + } +out: + brelse(sinfo.bh); + brelse(dotdot_bh); + brelse(old_sinfo.bh); + unlock_super(sb); + + return err; + +error_dotdot: + /* data cluster is shared, serious corruption */ + corrupt = 1; + + if (update_dotdot) { + int start = MSDOS_I(old_dir)->i_logstart; + dotdot_de->start = cpu_to_le16(start); + dotdot_de->starthi = cpu_to_le16(start >> 16); + mark_buffer_dirty(dotdot_bh); + corrupt |= sync_dirty_buffer(dotdot_bh); + } +error_inode: + fat_detach(old_inode); + fat_attach(old_inode, old_sinfo.i_pos); + if (new_inode) { + fat_attach(new_inode, new_i_pos); + if (corrupt) + corrupt |= fat_sync_inode(new_inode); + } else { + /* + * If new entry was not sharing the data cluster, it + * shouldn't be serious corruption. + */ + int err2 = fat_remove_entries(new_dir, &sinfo); + if (corrupt) + corrupt |= err2; + sinfo.bh = NULL; + } + if (corrupt < 0) { + fat_fs_panic(new_dir->i_sb, + "%s: Filesystem corrupted (i_pos %lld)", + __func__, sinfo.i_pos); + } + goto out; +} + +static const struct inode_operations vfat_dir_inode_operations = { + .create = vfat_create, + .lookup = vfat_lookup, + .unlink = vfat_unlink, + .mkdir = vfat_mkdir, + .rmdir = vfat_rmdir, + .rename = vfat_rename, + .setattr = fat_setattr, + .getattr = fat_getattr, +}; + +static int vfat_fill_super(struct super_block *sb, void *data, int silent) +{ + int res; + + res = fat_fill_super(sb, data, silent, &vfat_dir_inode_operations, 1); + if (res) + return res; + + if (MSDOS_SB(sb)->options.name_check != 's') + sb->s_root->d_op = &vfat_dentry_ops[0]; + else + sb->s_root->d_op = &vfat_dentry_ops[2]; + + return 0; +} + +static int vfat_get_sb(struct file_system_type *fs_type, + int flags, const char *dev_name, + void *data, struct vfsmount *mnt) +{ + return get_sb_bdev(fs_type, flags, dev_name, data, vfat_fill_super, + mnt); +} + +static struct file_system_type vfat_fs_type = { + .owner = THIS_MODULE, + .name = "vfat", + .get_sb = vfat_get_sb, + .kill_sb = kill_block_super, + .fs_flags = FS_REQUIRES_DEV, +}; + +static int __init init_vfat_fs(void) +{ + return register_filesystem(&vfat_fs_type); +} + +static void __exit exit_vfat_fs(void) +{ + unregister_filesystem(&vfat_fs_type); +} + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("VFAT filesystem support"); +MODULE_AUTHOR("Gordon Chaffee"); + +module_init(init_vfat_fs) +module_exit(exit_vfat_fs) diff --git a/fs/msdos/Makefile b/fs/msdos/Makefile deleted file mode 100644 index ea67646fcb95..000000000000 --- a/fs/msdos/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the Linux msdos filesystem routines. -# - -obj-$(CONFIG_MSDOS_FS) += msdos.o - -msdos-y := namei.o diff --git a/fs/msdos/namei.c b/fs/msdos/namei.c deleted file mode 100644 index e844b9809d27..000000000000 --- a/fs/msdos/namei.c +++ /dev/null @@ -1,702 +0,0 @@ -/* - * linux/fs/msdos/namei.c - * - * Written 1992,1993 by Werner Almesberger - * Hidden files 1995 by Albert Cahalan - * Rewritten for constant inumbers 1999 by Al Viro - */ - -#include -#include -#include -#include -#include - -/* Characters that are undesirable in an MS-DOS file name */ -static unsigned char bad_chars[] = "*?<>|\""; -static unsigned char bad_if_strict[] = "+=,; "; - -/***** Formats an MS-DOS file name. Rejects invalid names. */ -static int msdos_format_name(const unsigned char *name, int len, - unsigned char *res, struct fat_mount_options *opts) - /* - * name is the proposed name, len is its length, res is - * the resulting name, opts->name_check is either (r)elaxed, - * (n)ormal or (s)trict, opts->dotsOK allows dots at the - * beginning of name (for hidden files) - */ -{ - unsigned char *walk; - unsigned char c; - int space; - - if (name[0] == '.') { /* dotfile because . and .. already done */ - if (opts->dotsOK) { - /* Get rid of dot - test for it elsewhere */ - name++; - len--; - } else - return -EINVAL; - } - /* - * disallow names that _really_ start with a dot - */ - space = 1; - c = 0; - for (walk = res; len && walk - res < 8; walk++) { - c = *name++; - len--; - if (opts->name_check != 'r' && strchr(bad_chars, c)) - return -EINVAL; - if (opts->name_check == 's' && strchr(bad_if_strict, c)) - return -EINVAL; - if (c >= 'A' && c <= 'Z' && opts->name_check == 's') - return -EINVAL; - if (c < ' ' || c == ':' || c == '\\') - return -EINVAL; - /* - * 0xE5 is legal as a first character, but we must substitute - * 0x05 because 0xE5 marks deleted files. Yes, DOS really - * does this. - * It seems that Microsoft hacked DOS to support non-US - * characters after the 0xE5 character was already in use to - * mark deleted files. - */ - if ((res == walk) && (c == 0xE5)) - c = 0x05; - if (c == '.') - break; - space = (c == ' '); - *walk = (!opts->nocase && c >= 'a' && c <= 'z') ? c - 32 : c; - } - if (space) - return -EINVAL; - if (opts->name_check == 's' && len && c != '.') { - c = *name++; - len--; - if (c != '.') - return -EINVAL; - } - while (c != '.' && len--) - c = *name++; - if (c == '.') { - while (walk - res < 8) - *walk++ = ' '; - while (len > 0 && walk - res < MSDOS_NAME) { - c = *name++; - len--; - if (opts->name_check != 'r' && strchr(bad_chars, c)) - return -EINVAL; - if (opts->name_check == 's' && - strchr(bad_if_strict, c)) - return -EINVAL; - if (c < ' ' || c == ':' || c == '\\') - return -EINVAL; - if (c == '.') { - if (opts->name_check == 's') - return -EINVAL; - break; - } - if (c >= 'A' && c <= 'Z' && opts->name_check == 's') - return -EINVAL; - space = c == ' '; - if (!opts->nocase && c >= 'a' && c <= 'z') - *walk++ = c - 32; - else - *walk++ = c; - } - if (space) - return -EINVAL; - if (opts->name_check == 's' && len) - return -EINVAL; - } - while (walk - res < MSDOS_NAME) - *walk++ = ' '; - - return 0; -} - -/***** Locates a directory entry. Uses unformatted name. */ -static int msdos_find(struct inode *dir, const unsigned char *name, int len, - struct fat_slot_info *sinfo) -{ - struct msdos_sb_info *sbi = MSDOS_SB(dir->i_sb); - unsigned char msdos_name[MSDOS_NAME]; - int err; - - err = msdos_format_name(name, len, msdos_name, &sbi->options); - if (err) - return -ENOENT; - - err = fat_scan(dir, msdos_name, sinfo); - if (!err && sbi->options.dotsOK) { - if (name[0] == '.') { - if (!(sinfo->de->attr & ATTR_HIDDEN)) - err = -ENOENT; - } else { - if (sinfo->de->attr & ATTR_HIDDEN) - err = -ENOENT; - } - if (err) - brelse(sinfo->bh); - } - return err; -} - -/* - * Compute the hash for the msdos name corresponding to the dentry. - * Note: if the name is invalid, we leave the hash code unchanged so - * that the existing dentry can be used. The msdos fs routines will - * return ENOENT or EINVAL as appropriate. - */ -static int msdos_hash(struct dentry *dentry, struct qstr *qstr) -{ - struct fat_mount_options *options = &MSDOS_SB(dentry->d_sb)->options; - unsigned char msdos_name[MSDOS_NAME]; - int error; - - error = msdos_format_name(qstr->name, qstr->len, msdos_name, options); - if (!error) - qstr->hash = full_name_hash(msdos_name, MSDOS_NAME); - return 0; -} - -/* - * Compare two msdos names. If either of the names are invalid, - * we fall back to doing the standard name comparison. - */ -static int msdos_cmp(struct dentry *dentry, struct qstr *a, struct qstr *b) -{ - struct fat_mount_options *options = &MSDOS_SB(dentry->d_sb)->options; - unsigned char a_msdos_name[MSDOS_NAME], b_msdos_name[MSDOS_NAME]; - int error; - - error = msdos_format_name(a->name, a->len, a_msdos_name, options); - if (error) - goto old_compare; - error = msdos_format_name(b->name, b->len, b_msdos_name, options); - if (error) - goto old_compare; - error = memcmp(a_msdos_name, b_msdos_name, MSDOS_NAME); -out: - return error; - -old_compare: - error = 1; - if (a->len == b->len) - error = memcmp(a->name, b->name, a->len); - goto out; -} - -static struct dentry_operations msdos_dentry_operations = { - .d_hash = msdos_hash, - .d_compare = msdos_cmp, -}; - -/* - * AV. Wrappers for FAT sb operations. Is it wise? - */ - -/***** Get inode using directory and name */ -static struct dentry *msdos_lookup(struct inode *dir, struct dentry *dentry, - struct nameidata *nd) -{ - struct super_block *sb = dir->i_sb; - struct fat_slot_info sinfo; - struct inode *inode = NULL; - int res; - - dentry->d_op = &msdos_dentry_operations; - - lock_super(sb); - res = msdos_find(dir, dentry->d_name.name, dentry->d_name.len, &sinfo); - if (res == -ENOENT) - goto add; - if (res < 0) - goto out; - inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); - brelse(sinfo.bh); - if (IS_ERR(inode)) { - res = PTR_ERR(inode); - goto out; - } -add: - res = 0; - dentry = d_splice_alias(inode, dentry); - if (dentry) - dentry->d_op = &msdos_dentry_operations; -out: - unlock_super(sb); - if (!res) - return dentry; - return ERR_PTR(res); -} - -/***** Creates a directory entry (name is already formatted). */ -static int msdos_add_entry(struct inode *dir, const unsigned char *name, - int is_dir, int is_hid, int cluster, - struct timespec *ts, struct fat_slot_info *sinfo) -{ - struct msdos_sb_info *sbi = MSDOS_SB(dir->i_sb); - struct msdos_dir_entry de; - __le16 time, date; - int err; - - memcpy(de.name, name, MSDOS_NAME); - de.attr = is_dir ? ATTR_DIR : ATTR_ARCH; - if (is_hid) - de.attr |= ATTR_HIDDEN; - de.lcase = 0; - fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc); - de.cdate = de.adate = 0; - de.ctime = 0; - de.ctime_cs = 0; - de.time = time; - de.date = date; - de.start = cpu_to_le16(cluster); - de.starthi = cpu_to_le16(cluster >> 16); - de.size = 0; - - err = fat_add_entries(dir, &de, 1, sinfo); - if (err) - return err; - - dir->i_ctime = dir->i_mtime = *ts; - if (IS_DIRSYNC(dir)) - (void)fat_sync_inode(dir); - else - mark_inode_dirty(dir); - - return 0; -} - -/***** Create a file */ -static int msdos_create(struct inode *dir, struct dentry *dentry, int mode, - struct nameidata *nd) -{ - struct super_block *sb = dir->i_sb; - struct inode *inode = NULL; - struct fat_slot_info sinfo; - struct timespec ts; - unsigned char msdos_name[MSDOS_NAME]; - int err, is_hid; - - lock_super(sb); - - err = msdos_format_name(dentry->d_name.name, dentry->d_name.len, - msdos_name, &MSDOS_SB(sb)->options); - if (err) - goto out; - is_hid = (dentry->d_name.name[0] == '.') && (msdos_name[0] != '.'); - /* Have to do it due to foo vs. .foo conflicts */ - if (!fat_scan(dir, msdos_name, &sinfo)) { - brelse(sinfo.bh); - err = -EINVAL; - goto out; - } - - ts = CURRENT_TIME_SEC; - err = msdos_add_entry(dir, msdos_name, 0, is_hid, 0, &ts, &sinfo); - if (err) - goto out; - inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); - brelse(sinfo.bh); - if (IS_ERR(inode)) { - err = PTR_ERR(inode); - goto out; - } - inode->i_mtime = inode->i_atime = inode->i_ctime = ts; - /* timestamp is already written, so mark_inode_dirty() is unneeded. */ - - d_instantiate(dentry, inode); -out: - unlock_super(sb); - if (!err) - err = fat_flush_inodes(sb, dir, inode); - return err; -} - -/***** Remove a directory */ -static int msdos_rmdir(struct inode *dir, struct dentry *dentry) -{ - struct super_block *sb = dir->i_sb; - struct inode *inode = dentry->d_inode; - struct fat_slot_info sinfo; - int err; - - lock_super(sb); - /* - * Check whether the directory is not in use, then check - * whether it is empty. - */ - err = fat_dir_empty(inode); - if (err) - goto out; - err = msdos_find(dir, dentry->d_name.name, dentry->d_name.len, &sinfo); - if (err) - goto out; - - err = fat_remove_entries(dir, &sinfo); /* and releases bh */ - if (err) - goto out; - drop_nlink(dir); - - clear_nlink(inode); - inode->i_ctime = CURRENT_TIME_SEC; - fat_detach(inode); -out: - unlock_super(sb); - if (!err) - err = fat_flush_inodes(sb, dir, inode); - - return err; -} - -/***** Make a directory */ -static int msdos_mkdir(struct inode *dir, struct dentry *dentry, int mode) -{ - struct super_block *sb = dir->i_sb; - struct fat_slot_info sinfo; - struct inode *inode; - unsigned char msdos_name[MSDOS_NAME]; - struct timespec ts; - int err, is_hid, cluster; - - lock_super(sb); - - err = msdos_format_name(dentry->d_name.name, dentry->d_name.len, - msdos_name, &MSDOS_SB(sb)->options); - if (err) - goto out; - is_hid = (dentry->d_name.name[0] == '.') && (msdos_name[0] != '.'); - /* foo vs .foo situation */ - if (!fat_scan(dir, msdos_name, &sinfo)) { - brelse(sinfo.bh); - err = -EINVAL; - goto out; - } - - ts = CURRENT_TIME_SEC; - cluster = fat_alloc_new_dir(dir, &ts); - if (cluster < 0) { - err = cluster; - goto out; - } - err = msdos_add_entry(dir, msdos_name, 1, is_hid, cluster, &ts, &sinfo); - if (err) - goto out_free; - inc_nlink(dir); - - inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); - brelse(sinfo.bh); - if (IS_ERR(inode)) { - err = PTR_ERR(inode); - /* the directory was completed, just return a error */ - goto out; - } - inode->i_nlink = 2; - inode->i_mtime = inode->i_atime = inode->i_ctime = ts; - /* timestamp is already written, so mark_inode_dirty() is unneeded. */ - - d_instantiate(dentry, inode); - - unlock_super(sb); - fat_flush_inodes(sb, dir, inode); - return 0; - -out_free: - fat_free_clusters(dir, cluster); -out: - unlock_super(sb); - return err; -} - -/***** Unlink a file */ -static int msdos_unlink(struct inode *dir, struct dentry *dentry) -{ - struct inode *inode = dentry->d_inode; - struct super_block *sb= inode->i_sb; - struct fat_slot_info sinfo; - int err; - - lock_super(sb); - err = msdos_find(dir, dentry->d_name.name, dentry->d_name.len, &sinfo); - if (err) - goto out; - - err = fat_remove_entries(dir, &sinfo); /* and releases bh */ - if (err) - goto out; - clear_nlink(inode); - inode->i_ctime = CURRENT_TIME_SEC; - fat_detach(inode); -out: - unlock_super(sb); - if (!err) - err = fat_flush_inodes(sb, dir, inode); - - return err; -} - -static int do_msdos_rename(struct inode *old_dir, unsigned char *old_name, - struct dentry *old_dentry, - struct inode *new_dir, unsigned char *new_name, - struct dentry *new_dentry, int is_hid) -{ - struct buffer_head *dotdot_bh; - struct msdos_dir_entry *dotdot_de; - struct inode *old_inode, *new_inode; - struct fat_slot_info old_sinfo, sinfo; - struct timespec ts; - loff_t dotdot_i_pos, new_i_pos; - int err, old_attrs, is_dir, update_dotdot, corrupt = 0; - - old_sinfo.bh = sinfo.bh = dotdot_bh = NULL; - old_inode = old_dentry->d_inode; - new_inode = new_dentry->d_inode; - - err = fat_scan(old_dir, old_name, &old_sinfo); - if (err) { - err = -EIO; - goto out; - } - - is_dir = S_ISDIR(old_inode->i_mode); - update_dotdot = (is_dir && old_dir != new_dir); - if (update_dotdot) { - if (fat_get_dotdot_entry(old_inode, &dotdot_bh, &dotdot_de, - &dotdot_i_pos) < 0) { - err = -EIO; - goto out; - } - } - - old_attrs = MSDOS_I(old_inode)->i_attrs; - err = fat_scan(new_dir, new_name, &sinfo); - if (!err) { - if (!new_inode) { - /* "foo" -> ".foo" case. just change the ATTR_HIDDEN */ - if (sinfo.de != old_sinfo.de) { - err = -EINVAL; - goto out; - } - if (is_hid) - MSDOS_I(old_inode)->i_attrs |= ATTR_HIDDEN; - else - MSDOS_I(old_inode)->i_attrs &= ~ATTR_HIDDEN; - if (IS_DIRSYNC(old_dir)) { - err = fat_sync_inode(old_inode); - if (err) { - MSDOS_I(old_inode)->i_attrs = old_attrs; - goto out; - } - } else - mark_inode_dirty(old_inode); - - old_dir->i_version++; - old_dir->i_ctime = old_dir->i_mtime = CURRENT_TIME_SEC; - if (IS_DIRSYNC(old_dir)) - (void)fat_sync_inode(old_dir); - else - mark_inode_dirty(old_dir); - goto out; - } - } - - ts = CURRENT_TIME_SEC; - if (new_inode) { - if (err) - goto out; - if (is_dir) { - err = fat_dir_empty(new_inode); - if (err) - goto out; - } - new_i_pos = MSDOS_I(new_inode)->i_pos; - fat_detach(new_inode); - } else { - err = msdos_add_entry(new_dir, new_name, is_dir, is_hid, 0, - &ts, &sinfo); - if (err) - goto out; - new_i_pos = sinfo.i_pos; - } - new_dir->i_version++; - - fat_detach(old_inode); - fat_attach(old_inode, new_i_pos); - if (is_hid) - MSDOS_I(old_inode)->i_attrs |= ATTR_HIDDEN; - else - MSDOS_I(old_inode)->i_attrs &= ~ATTR_HIDDEN; - if (IS_DIRSYNC(new_dir)) { - err = fat_sync_inode(old_inode); - if (err) - goto error_inode; - } else - mark_inode_dirty(old_inode); - - if (update_dotdot) { - int start = MSDOS_I(new_dir)->i_logstart; - dotdot_de->start = cpu_to_le16(start); - dotdot_de->starthi = cpu_to_le16(start >> 16); - mark_buffer_dirty(dotdot_bh); - if (IS_DIRSYNC(new_dir)) { - err = sync_dirty_buffer(dotdot_bh); - if (err) - goto error_dotdot; - } - drop_nlink(old_dir); - if (!new_inode) - inc_nlink(new_dir); - } - - err = fat_remove_entries(old_dir, &old_sinfo); /* and releases bh */ - old_sinfo.bh = NULL; - if (err) - goto error_dotdot; - old_dir->i_version++; - old_dir->i_ctime = old_dir->i_mtime = ts; - if (IS_DIRSYNC(old_dir)) - (void)fat_sync_inode(old_dir); - else - mark_inode_dirty(old_dir); - - if (new_inode) { - drop_nlink(new_inode); - if (is_dir) - drop_nlink(new_inode); - new_inode->i_ctime = ts; - } -out: - brelse(sinfo.bh); - brelse(dotdot_bh); - brelse(old_sinfo.bh); - return err; - -error_dotdot: - /* data cluster is shared, serious corruption */ - corrupt = 1; - - if (update_dotdot) { - int start = MSDOS_I(old_dir)->i_logstart; - dotdot_de->start = cpu_to_le16(start); - dotdot_de->starthi = cpu_to_le16(start >> 16); - mark_buffer_dirty(dotdot_bh); - corrupt |= sync_dirty_buffer(dotdot_bh); - } -error_inode: - fat_detach(old_inode); - fat_attach(old_inode, old_sinfo.i_pos); - MSDOS_I(old_inode)->i_attrs = old_attrs; - if (new_inode) { - fat_attach(new_inode, new_i_pos); - if (corrupt) - corrupt |= fat_sync_inode(new_inode); - } else { - /* - * If new entry was not sharing the data cluster, it - * shouldn't be serious corruption. - */ - int err2 = fat_remove_entries(new_dir, &sinfo); - if (corrupt) - corrupt |= err2; - sinfo.bh = NULL; - } - if (corrupt < 0) { - fat_fs_panic(new_dir->i_sb, - "%s: Filesystem corrupted (i_pos %lld)", - __func__, sinfo.i_pos); - } - goto out; -} - -/***** Rename, a wrapper for rename_same_dir & rename_diff_dir */ -static int msdos_rename(struct inode *old_dir, struct dentry *old_dentry, - struct inode *new_dir, struct dentry *new_dentry) -{ - struct super_block *sb = old_dir->i_sb; - unsigned char old_msdos_name[MSDOS_NAME], new_msdos_name[MSDOS_NAME]; - int err, is_hid; - - lock_super(sb); - - err = msdos_format_name(old_dentry->d_name.name, - old_dentry->d_name.len, old_msdos_name, - &MSDOS_SB(old_dir->i_sb)->options); - if (err) - goto out; - err = msdos_format_name(new_dentry->d_name.name, - new_dentry->d_name.len, new_msdos_name, - &MSDOS_SB(new_dir->i_sb)->options); - if (err) - goto out; - - is_hid = - (new_dentry->d_name.name[0] == '.') && (new_msdos_name[0] != '.'); - - err = do_msdos_rename(old_dir, old_msdos_name, old_dentry, - new_dir, new_msdos_name, new_dentry, is_hid); -out: - unlock_super(sb); - if (!err) - err = fat_flush_inodes(sb, old_dir, new_dir); - return err; -} - -static const struct inode_operations msdos_dir_inode_operations = { - .create = msdos_create, - .lookup = msdos_lookup, - .unlink = msdos_unlink, - .mkdir = msdos_mkdir, - .rmdir = msdos_rmdir, - .rename = msdos_rename, - .setattr = fat_setattr, - .getattr = fat_getattr, -}; - -static int msdos_fill_super(struct super_block *sb, void *data, int silent) -{ - int res; - - res = fat_fill_super(sb, data, silent, &msdos_dir_inode_operations, 0); - if (res) - return res; - - sb->s_flags |= MS_NOATIME; - sb->s_root->d_op = &msdos_dentry_operations; - return 0; -} - -static int msdos_get_sb(struct file_system_type *fs_type, - int flags, const char *dev_name, - void *data, struct vfsmount *mnt) -{ - return get_sb_bdev(fs_type, flags, dev_name, data, msdos_fill_super, - mnt); -} - -static struct file_system_type msdos_fs_type = { - .owner = THIS_MODULE, - .name = "msdos", - .get_sb = msdos_get_sb, - .kill_sb = kill_block_super, - .fs_flags = FS_REQUIRES_DEV, -}; - -static int __init init_msdos_fs(void) -{ - return register_filesystem(&msdos_fs_type); -} - -static void __exit exit_msdos_fs(void) -{ - unregister_filesystem(&msdos_fs_type); -} - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Werner Almesberger"); -MODULE_DESCRIPTION("MS-DOS filesystem support"); - -module_init(init_msdos_fs) -module_exit(exit_msdos_fs) diff --git a/fs/vfat/Makefile b/fs/vfat/Makefile deleted file mode 100644 index 40f2798a4f08..000000000000 --- a/fs/vfat/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the linux vfat-filesystem routines. -# - -obj-$(CONFIG_VFAT_FS) += vfat.o - -vfat-y := namei.o diff --git a/fs/vfat/namei.c b/fs/vfat/namei.c deleted file mode 100644 index 155c10b4adbd..000000000000 --- a/fs/vfat/namei.c +++ /dev/null @@ -1,1055 +0,0 @@ -/* - * linux/fs/vfat/namei.c - * - * Written 1992,1993 by Werner Almesberger - * - * Windows95/Windows NT compatible extended MSDOS filesystem - * by Gordon Chaffee Copyright (C) 1995. Send bug reports for the - * VFAT filesystem to . Specify - * what file operation caused you trouble and if you can duplicate - * the problem, send a script that demonstrates it. - * - * Short name translation 1999, 2001 by Wolfram Pienkoss - * - * Support Multibyte characters and cleanup by - * OGAWA Hirofumi - */ - -#include - -#include -#include -#include -#include -#include -#include -#include - -static int vfat_revalidate(struct dentry *dentry, struct nameidata *nd) -{ - int ret = 1; - - if (!dentry->d_inode && - nd && !(nd->flags & LOOKUP_CONTINUE) && (nd->flags & LOOKUP_CREATE)) - /* - * negative dentry is dropped, in order to make sure - * to use the name which a user desires if this is - * create path. - */ - ret = 0; - else { - spin_lock(&dentry->d_lock); - if (dentry->d_time != dentry->d_parent->d_inode->i_version) - ret = 0; - spin_unlock(&dentry->d_lock); - } - return ret; -} - -/* returns the length of a struct qstr, ignoring trailing dots */ -static unsigned int vfat_striptail_len(struct qstr *qstr) -{ - unsigned int len = qstr->len; - - while (len && qstr->name[len - 1] == '.') - len--; - return len; -} - -/* - * Compute the hash for the vfat name corresponding to the dentry. - * Note: if the name is invalid, we leave the hash code unchanged so - * that the existing dentry can be used. The vfat fs routines will - * return ENOENT or EINVAL as appropriate. - */ -static int vfat_hash(struct dentry *dentry, struct qstr *qstr) -{ - qstr->hash = full_name_hash(qstr->name, vfat_striptail_len(qstr)); - return 0; -} - -/* - * Compute the hash for the vfat name corresponding to the dentry. - * Note: if the name is invalid, we leave the hash code unchanged so - * that the existing dentry can be used. The vfat fs routines will - * return ENOENT or EINVAL as appropriate. - */ -static int vfat_hashi(struct dentry *dentry, struct qstr *qstr) -{ - struct nls_table *t = MSDOS_SB(dentry->d_inode->i_sb)->nls_io; - const unsigned char *name; - unsigned int len; - unsigned long hash; - - name = qstr->name; - len = vfat_striptail_len(qstr); - - hash = init_name_hash(); - while (len--) - hash = partial_name_hash(nls_tolower(t, *name++), hash); - qstr->hash = end_name_hash(hash); - - return 0; -} - -/* - * Case insensitive compare of two vfat names. - */ -static int vfat_cmpi(struct dentry *dentry, struct qstr *a, struct qstr *b) -{ - struct nls_table *t = MSDOS_SB(dentry->d_inode->i_sb)->nls_io; - unsigned int alen, blen; - - /* A filename cannot end in '.' or we treat it like it has none */ - alen = vfat_striptail_len(a); - blen = vfat_striptail_len(b); - if (alen == blen) { - if (nls_strnicmp(t, a->name, b->name, alen) == 0) - return 0; - } - return 1; -} - -/* - * Case sensitive compare of two vfat names. - */ -static int vfat_cmp(struct dentry *dentry, struct qstr *a, struct qstr *b) -{ - unsigned int alen, blen; - - /* A filename cannot end in '.' or we treat it like it has none */ - alen = vfat_striptail_len(a); - blen = vfat_striptail_len(b); - if (alen == blen) { - if (strncmp(a->name, b->name, alen) == 0) - return 0; - } - return 1; -} - -static struct dentry_operations vfat_dentry_ops[4] = { - { - .d_hash = vfat_hashi, - .d_compare = vfat_cmpi, - }, - { - .d_revalidate = vfat_revalidate, - .d_hash = vfat_hashi, - .d_compare = vfat_cmpi, - }, - { - .d_hash = vfat_hash, - .d_compare = vfat_cmp, - }, - { - .d_revalidate = vfat_revalidate, - .d_hash = vfat_hash, - .d_compare = vfat_cmp, - } -}; - -/* Characters that are undesirable in an MS-DOS file name */ - -static inline wchar_t vfat_bad_char(wchar_t w) -{ - return (w < 0x0020) - || (w == '*') || (w == '?') || (w == '<') || (w == '>') - || (w == '|') || (w == '"') || (w == ':') || (w == '/') - || (w == '\\'); -} - -static inline wchar_t vfat_replace_char(wchar_t w) -{ - return (w == '[') || (w == ']') || (w == ';') || (w == ',') - || (w == '+') || (w == '='); -} - -static wchar_t vfat_skip_char(wchar_t w) -{ - return (w == '.') || (w == ' '); -} - -static inline int vfat_is_used_badchars(const wchar_t *s, int len) -{ - int i; - - for (i = 0; i < len; i++) - if (vfat_bad_char(s[i])) - return -EINVAL; - - if (s[i - 1] == ' ') /* last character cannot be space */ - return -EINVAL; - - return 0; -} - -static int vfat_find_form(struct inode *dir, unsigned char *name) -{ - struct fat_slot_info sinfo; - int err = fat_scan(dir, name, &sinfo); - if (err) - return -ENOENT; - brelse(sinfo.bh); - return 0; -} - -/* - * 1) Valid characters for the 8.3 format alias are any combination of - * letters, uppercase alphabets, digits, any of the - * following special characters: - * $ % ' ` - @ { } ~ ! # ( ) & _ ^ - * In this case Longfilename is not stored in disk. - * - * WinNT's Extension: - * File name and extension name is contain uppercase/lowercase - * only. And it is expressed by CASE_LOWER_BASE and CASE_LOWER_EXT. - * - * 2) File name is 8.3 format, but it contain the uppercase and - * lowercase char, muliti bytes char, etc. In this case numtail is not - * added, but Longfilename is stored. - * - * 3) When the one except for the above, or the following special - * character are contained: - * . [ ] ; , + = - * numtail is added, and Longfilename must be stored in disk . - */ -struct shortname_info { - unsigned char lower:1, - upper:1, - valid:1; -}; -#define INIT_SHORTNAME_INFO(x) do { \ - (x)->lower = 1; \ - (x)->upper = 1; \ - (x)->valid = 1; \ -} while (0) - -static inline int to_shortname_char(struct nls_table *nls, - unsigned char *buf, int buf_size, - wchar_t *src, struct shortname_info *info) -{ - int len; - - if (vfat_skip_char(*src)) { - info->valid = 0; - return 0; - } - if (vfat_replace_char(*src)) { - info->valid = 0; - buf[0] = '_'; - return 1; - } - - len = nls->uni2char(*src, buf, buf_size); - if (len <= 0) { - info->valid = 0; - buf[0] = '_'; - len = 1; - } else if (len == 1) { - unsigned char prev = buf[0]; - - if (buf[0] >= 0x7F) { - info->lower = 0; - info->upper = 0; - } - - buf[0] = nls_toupper(nls, buf[0]); - if (isalpha(buf[0])) { - if (buf[0] == prev) - info->lower = 0; - else - info->upper = 0; - } - } else { - info->lower = 0; - info->upper = 0; - } - - return len; -} - -/* - * Given a valid longname, create a unique shortname. Make sure the - * shortname does not exist - * Returns negative number on error, 0 for a normal - * return, and 1 for valid shortname - */ -static int vfat_create_shortname(struct inode *dir, struct nls_table *nls, - wchar_t *uname, int ulen, - unsigned char *name_res, unsigned char *lcase) -{ - struct fat_mount_options *opts = &MSDOS_SB(dir->i_sb)->options; - wchar_t *ip, *ext_start, *end, *name_start; - unsigned char base[9], ext[4], buf[8], *p; - unsigned char charbuf[NLS_MAX_CHARSET_SIZE]; - int chl, chi; - int sz = 0, extlen, baselen, i, numtail_baselen, numtail2_baselen; - int is_shortname; - struct shortname_info base_info, ext_info; - - is_shortname = 1; - INIT_SHORTNAME_INFO(&base_info); - INIT_SHORTNAME_INFO(&ext_info); - - /* Now, we need to create a shortname from the long name */ - ext_start = end = &uname[ulen]; - while (--ext_start >= uname) { - if (*ext_start == 0x002E) { /* is `.' */ - if (ext_start == end - 1) { - sz = ulen; - ext_start = NULL; - } - break; - } - } - - if (ext_start == uname - 1) { - sz = ulen; - ext_start = NULL; - } else if (ext_start) { - /* - * Names which start with a dot could be just - * an extension eg. "...test". In this case Win95 - * uses the extension as the name and sets no extension. - */ - name_start = &uname[0]; - while (name_start < ext_start) { - if (!vfat_skip_char(*name_start)) - break; - name_start++; - } - if (name_start != ext_start) { - sz = ext_start - uname; - ext_start++; - } else { - sz = ulen; - ext_start = NULL; - } - } - - numtail_baselen = 6; - numtail2_baselen = 2; - for (baselen = i = 0, p = base, ip = uname; i < sz; i++, ip++) { - chl = to_shortname_char(nls, charbuf, sizeof(charbuf), - ip, &base_info); - if (chl == 0) - continue; - - if (baselen < 2 && (baselen + chl) > 2) - numtail2_baselen = baselen; - if (baselen < 6 && (baselen + chl) > 6) - numtail_baselen = baselen; - for (chi = 0; chi < chl; chi++) { - *p++ = charbuf[chi]; - baselen++; - if (baselen >= 8) - break; - } - if (baselen >= 8) { - if ((chi < chl - 1) || (ip + 1) - uname < sz) - is_shortname = 0; - break; - } - } - if (baselen == 0) { - return -EINVAL; - } - - extlen = 0; - if (ext_start) { - for (p = ext, ip = ext_start; extlen < 3 && ip < end; ip++) { - chl = to_shortname_char(nls, charbuf, sizeof(charbuf), - ip, &ext_info); - if (chl == 0) - continue; - - if ((extlen + chl) > 3) { - is_shortname = 0; - break; - } - for (chi = 0; chi < chl; chi++) { - *p++ = charbuf[chi]; - extlen++; - } - if (extlen >= 3) { - if (ip + 1 != end) - is_shortname = 0; - break; - } - } - } - ext[extlen] = '\0'; - base[baselen] = '\0'; - - /* Yes, it can happen. ".\xe5" would do it. */ - if (base[0] == DELETED_FLAG) - base[0] = 0x05; - - /* OK, at this point we know that base is not longer than 8 symbols, - * ext is not longer than 3, base is nonempty, both don't contain - * any bad symbols (lowercase transformed to uppercase). - */ - - memset(name_res, ' ', MSDOS_NAME); - memcpy(name_res, base, baselen); - memcpy(name_res + 8, ext, extlen); - *lcase = 0; - if (is_shortname && base_info.valid && ext_info.valid) { - if (vfat_find_form(dir, name_res) == 0) - return -EEXIST; - - if (opts->shortname & VFAT_SFN_CREATE_WIN95) { - return (base_info.upper && ext_info.upper); - } else if (opts->shortname & VFAT_SFN_CREATE_WINNT) { - if ((base_info.upper || base_info.lower) && - (ext_info.upper || ext_info.lower)) { - if (!base_info.upper && base_info.lower) - *lcase |= CASE_LOWER_BASE; - if (!ext_info.upper && ext_info.lower) - *lcase |= CASE_LOWER_EXT; - return 1; - } - return 0; - } else { - BUG(); - } - } - - if (opts->numtail == 0) - if (vfat_find_form(dir, name_res) < 0) - return 0; - - /* - * Try to find a unique extension. This used to - * iterate through all possibilities sequentially, - * but that gave extremely bad performance. Windows - * only tries a few cases before using random - * values for part of the base. - */ - - if (baselen > 6) { - baselen = numtail_baselen; - name_res[7] = ' '; - } - name_res[baselen] = '~'; - for (i = 1; i < 10; i++) { - name_res[baselen + 1] = i + '0'; - if (vfat_find_form(dir, name_res) < 0) - return 0; - } - - i = jiffies & 0xffff; - sz = (jiffies >> 16) & 0x7; - if (baselen > 2) { - baselen = numtail2_baselen; - name_res[7] = ' '; - } - name_res[baselen + 4] = '~'; - name_res[baselen + 5] = '1' + sz; - while (1) { - sprintf(buf, "%04X", i); - memcpy(&name_res[baselen], buf, 4); - if (vfat_find_form(dir, name_res) < 0) - break; - i -= 11; - } - return 0; -} - -/* Translate a string, including coded sequences into Unicode */ -static int -xlate_to_uni(const unsigned char *name, int len, unsigned char *outname, - int *longlen, int *outlen, int escape, int utf8, - struct nls_table *nls) -{ - const unsigned char *ip; - unsigned char nc; - unsigned char *op; - unsigned int ec; - int i, k, fill; - int charlen; - - if (utf8) { - int name_len = strlen(name); - - *outlen = utf8_mbstowcs((wchar_t *)outname, name, PATH_MAX); - - /* - * We stripped '.'s before and set len appropriately, - * but utf8_mbstowcs doesn't care about len - */ - *outlen -= (name_len - len); - - if (*outlen > 255) - return -ENAMETOOLONG; - - op = &outname[*outlen * sizeof(wchar_t)]; - } else { - if (nls) { - for (i = 0, ip = name, op = outname, *outlen = 0; - i < len && *outlen <= 255; - *outlen += 1) - { - if (escape && (*ip == ':')) { - if (i > len - 5) - return -EINVAL; - ec = 0; - for (k = 1; k < 5; k++) { - nc = ip[k]; - ec <<= 4; - if (nc >= '0' && nc <= '9') { - ec |= nc - '0'; - continue; - } - if (nc >= 'a' && nc <= 'f') { - ec |= nc - ('a' - 10); - continue; - } - if (nc >= 'A' && nc <= 'F') { - ec |= nc - ('A' - 10); - continue; - } - return -EINVAL; - } - *op++ = ec & 0xFF; - *op++ = ec >> 8; - ip += 5; - i += 5; - } else { - if ((charlen = nls->char2uni(ip, len - i, (wchar_t *)op)) < 0) - return -EINVAL; - ip += charlen; - i += charlen; - op += 2; - } - } - if (i < len) - return -ENAMETOOLONG; - } else { - for (i = 0, ip = name, op = outname, *outlen = 0; - i < len && *outlen <= 255; - i++, *outlen += 1) - { - *op++ = *ip++; - *op++ = 0; - } - if (i < len) - return -ENAMETOOLONG; - } - } - - *longlen = *outlen; - if (*outlen % 13) { - *op++ = 0; - *op++ = 0; - *outlen += 1; - if (*outlen % 13) { - fill = 13 - (*outlen % 13); - for (i = 0; i < fill; i++) { - *op++ = 0xff; - *op++ = 0xff; - } - *outlen += fill; - } - } - - return 0; -} - -static int vfat_build_slots(struct inode *dir, const unsigned char *name, - int len, int is_dir, int cluster, - struct timespec *ts, - struct msdos_dir_slot *slots, int *nr_slots) -{ - struct msdos_sb_info *sbi = MSDOS_SB(dir->i_sb); - struct fat_mount_options *opts = &sbi->options; - struct msdos_dir_slot *ps; - struct msdos_dir_entry *de; - unsigned char cksum, lcase; - unsigned char msdos_name[MSDOS_NAME]; - wchar_t *uname; - __le16 time, date; - int err, ulen, usize, i; - loff_t offset; - - *nr_slots = 0; - - uname = __getname(); - if (!uname) - return -ENOMEM; - - err = xlate_to_uni(name, len, (unsigned char *)uname, &ulen, &usize, - opts->unicode_xlate, opts->utf8, sbi->nls_io); - if (err) - goto out_free; - - err = vfat_is_used_badchars(uname, ulen); - if (err) - goto out_free; - - err = vfat_create_shortname(dir, sbi->nls_disk, uname, ulen, - msdos_name, &lcase); - if (err < 0) - goto out_free; - else if (err == 1) { - de = (struct msdos_dir_entry *)slots; - err = 0; - goto shortname; - } - - /* build the entry of long file name */ - cksum = fat_checksum(msdos_name); - - *nr_slots = usize / 13; - for (ps = slots, i = *nr_slots; i > 0; i--, ps++) { - ps->id = i; - ps->attr = ATTR_EXT; - ps->reserved = 0; - ps->alias_checksum = cksum; - ps->start = 0; - offset = (i - 1) * 13; - fatwchar_to16(ps->name0_4, uname + offset, 5); - fatwchar_to16(ps->name5_10, uname + offset + 5, 6); - fatwchar_to16(ps->name11_12, uname + offset + 11, 2); - } - slots[0].id |= 0x40; - de = (struct msdos_dir_entry *)ps; - -shortname: - /* build the entry of 8.3 alias name */ - (*nr_slots)++; - memcpy(de->name, msdos_name, MSDOS_NAME); - de->attr = is_dir ? ATTR_DIR : ATTR_ARCH; - de->lcase = lcase; - fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc); - de->time = de->ctime = time; - de->date = de->cdate = de->adate = date; - de->ctime_cs = 0; - de->start = cpu_to_le16(cluster); - de->starthi = cpu_to_le16(cluster >> 16); - de->size = 0; -out_free: - __putname(uname); - return err; -} - -static int vfat_add_entry(struct inode *dir, struct qstr *qname, int is_dir, - int cluster, struct timespec *ts, - struct fat_slot_info *sinfo) -{ - struct msdos_dir_slot *slots; - unsigned int len; - int err, nr_slots; - - len = vfat_striptail_len(qname); - if (len == 0) - return -ENOENT; - - slots = kmalloc(sizeof(*slots) * MSDOS_SLOTS, GFP_NOFS); - if (slots == NULL) - return -ENOMEM; - - err = vfat_build_slots(dir, qname->name, len, is_dir, cluster, ts, - slots, &nr_slots); - if (err) - goto cleanup; - - err = fat_add_entries(dir, slots, nr_slots, sinfo); - if (err) - goto cleanup; - - /* update timestamp */ - dir->i_ctime = dir->i_mtime = dir->i_atime = *ts; - if (IS_DIRSYNC(dir)) - (void)fat_sync_inode(dir); - else - mark_inode_dirty(dir); -cleanup: - kfree(slots); - return err; -} - -static int vfat_find(struct inode *dir, struct qstr *qname, - struct fat_slot_info *sinfo) -{ - unsigned int len = vfat_striptail_len(qname); - if (len == 0) - return -ENOENT; - return fat_search_long(dir, qname->name, len, sinfo); -} - -static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry, - struct nameidata *nd) -{ - struct super_block *sb = dir->i_sb; - struct fat_slot_info sinfo; - struct inode *inode = NULL; - struct dentry *alias; - int err, table; - - lock_super(sb); - table = (MSDOS_SB(sb)->options.name_check == 's') ? 2 : 0; - dentry->d_op = &vfat_dentry_ops[table]; - - err = vfat_find(dir, &dentry->d_name, &sinfo); - if (err) { - table++; - goto error; - } - inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); - brelse(sinfo.bh); - if (IS_ERR(inode)) { - unlock_super(sb); - return ERR_CAST(inode); - } - alias = d_find_alias(inode); - if (alias) { - if (d_invalidate(alias) == 0) - dput(alias); - else { - iput(inode); - unlock_super(sb); - return alias; - } - - } -error: - unlock_super(sb); - dentry->d_op = &vfat_dentry_ops[table]; - dentry->d_time = dentry->d_parent->d_inode->i_version; - dentry = d_splice_alias(inode, dentry); - if (dentry) { - dentry->d_op = &vfat_dentry_ops[table]; - dentry->d_time = dentry->d_parent->d_inode->i_version; - } - return dentry; -} - -static int vfat_create(struct inode *dir, struct dentry *dentry, int mode, - struct nameidata *nd) -{ - struct super_block *sb = dir->i_sb; - struct inode *inode; - struct fat_slot_info sinfo; - struct timespec ts; - int err; - - lock_super(sb); - - ts = CURRENT_TIME_SEC; - err = vfat_add_entry(dir, &dentry->d_name, 0, 0, &ts, &sinfo); - if (err) - goto out; - dir->i_version++; - - inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); - brelse(sinfo.bh); - if (IS_ERR(inode)) { - err = PTR_ERR(inode); - goto out; - } - inode->i_version++; - inode->i_mtime = inode->i_atime = inode->i_ctime = ts; - /* timestamp is already written, so mark_inode_dirty() is unneeded. */ - - dentry->d_time = dentry->d_parent->d_inode->i_version; - d_instantiate(dentry, inode); -out: - unlock_super(sb); - return err; -} - -static int vfat_rmdir(struct inode *dir, struct dentry *dentry) -{ - struct inode *inode = dentry->d_inode; - struct super_block *sb = dir->i_sb; - struct fat_slot_info sinfo; - int err; - - lock_super(sb); - - err = fat_dir_empty(inode); - if (err) - goto out; - err = vfat_find(dir, &dentry->d_name, &sinfo); - if (err) - goto out; - - err = fat_remove_entries(dir, &sinfo); /* and releases bh */ - if (err) - goto out; - drop_nlink(dir); - - clear_nlink(inode); - inode->i_mtime = inode->i_atime = CURRENT_TIME_SEC; - fat_detach(inode); -out: - unlock_super(sb); - - return err; -} - -static int vfat_unlink(struct inode *dir, struct dentry *dentry) -{ - struct inode *inode = dentry->d_inode; - struct super_block *sb = dir->i_sb; - struct fat_slot_info sinfo; - int err; - - lock_super(sb); - - err = vfat_find(dir, &dentry->d_name, &sinfo); - if (err) - goto out; - - err = fat_remove_entries(dir, &sinfo); /* and releases bh */ - if (err) - goto out; - clear_nlink(inode); - inode->i_mtime = inode->i_atime = CURRENT_TIME_SEC; - fat_detach(inode); -out: - unlock_super(sb); - - return err; -} - -static int vfat_mkdir(struct inode *dir, struct dentry *dentry, int mode) -{ - struct super_block *sb = dir->i_sb; - struct inode *inode; - struct fat_slot_info sinfo; - struct timespec ts; - int err, cluster; - - lock_super(sb); - - ts = CURRENT_TIME_SEC; - cluster = fat_alloc_new_dir(dir, &ts); - if (cluster < 0) { - err = cluster; - goto out; - } - err = vfat_add_entry(dir, &dentry->d_name, 1, cluster, &ts, &sinfo); - if (err) - goto out_free; - dir->i_version++; - inc_nlink(dir); - - inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); - brelse(sinfo.bh); - if (IS_ERR(inode)) { - err = PTR_ERR(inode); - /* the directory was completed, just return a error */ - goto out; - } - inode->i_version++; - inode->i_nlink = 2; - inode->i_mtime = inode->i_atime = inode->i_ctime = ts; - /* timestamp is already written, so mark_inode_dirty() is unneeded. */ - - dentry->d_time = dentry->d_parent->d_inode->i_version; - d_instantiate(dentry, inode); - - unlock_super(sb); - return 0; - -out_free: - fat_free_clusters(dir, cluster); -out: - unlock_super(sb); - return err; -} - -static int vfat_rename(struct inode *old_dir, struct dentry *old_dentry, - struct inode *new_dir, struct dentry *new_dentry) -{ - struct buffer_head *dotdot_bh; - struct msdos_dir_entry *dotdot_de; - struct inode *old_inode, *new_inode; - struct fat_slot_info old_sinfo, sinfo; - struct timespec ts; - loff_t dotdot_i_pos, new_i_pos; - int err, is_dir, update_dotdot, corrupt = 0; - struct super_block *sb = old_dir->i_sb; - - old_sinfo.bh = sinfo.bh = dotdot_bh = NULL; - old_inode = old_dentry->d_inode; - new_inode = new_dentry->d_inode; - lock_super(sb); - err = vfat_find(old_dir, &old_dentry->d_name, &old_sinfo); - if (err) - goto out; - - is_dir = S_ISDIR(old_inode->i_mode); - update_dotdot = (is_dir && old_dir != new_dir); - if (update_dotdot) { - if (fat_get_dotdot_entry(old_inode, &dotdot_bh, &dotdot_de, - &dotdot_i_pos) < 0) { - err = -EIO; - goto out; - } - } - - ts = CURRENT_TIME_SEC; - if (new_inode) { - if (is_dir) { - err = fat_dir_empty(new_inode); - if (err) - goto out; - } - new_i_pos = MSDOS_I(new_inode)->i_pos; - fat_detach(new_inode); - } else { - err = vfat_add_entry(new_dir, &new_dentry->d_name, is_dir, 0, - &ts, &sinfo); - if (err) - goto out; - new_i_pos = sinfo.i_pos; - } - new_dir->i_version++; - - fat_detach(old_inode); - fat_attach(old_inode, new_i_pos); - if (IS_DIRSYNC(new_dir)) { - err = fat_sync_inode(old_inode); - if (err) - goto error_inode; - } else - mark_inode_dirty(old_inode); - - if (update_dotdot) { - int start = MSDOS_I(new_dir)->i_logstart; - dotdot_de->start = cpu_to_le16(start); - dotdot_de->starthi = cpu_to_le16(start >> 16); - mark_buffer_dirty(dotdot_bh); - if (IS_DIRSYNC(new_dir)) { - err = sync_dirty_buffer(dotdot_bh); - if (err) - goto error_dotdot; - } - drop_nlink(old_dir); - if (!new_inode) - inc_nlink(new_dir); - } - - err = fat_remove_entries(old_dir, &old_sinfo); /* and releases bh */ - old_sinfo.bh = NULL; - if (err) - goto error_dotdot; - old_dir->i_version++; - old_dir->i_ctime = old_dir->i_mtime = ts; - if (IS_DIRSYNC(old_dir)) - (void)fat_sync_inode(old_dir); - else - mark_inode_dirty(old_dir); - - if (new_inode) { - drop_nlink(new_inode); - if (is_dir) - drop_nlink(new_inode); - new_inode->i_ctime = ts; - } -out: - brelse(sinfo.bh); - brelse(dotdot_bh); - brelse(old_sinfo.bh); - unlock_super(sb); - - return err; - -error_dotdot: - /* data cluster is shared, serious corruption */ - corrupt = 1; - - if (update_dotdot) { - int start = MSDOS_I(old_dir)->i_logstart; - dotdot_de->start = cpu_to_le16(start); - dotdot_de->starthi = cpu_to_le16(start >> 16); - mark_buffer_dirty(dotdot_bh); - corrupt |= sync_dirty_buffer(dotdot_bh); - } -error_inode: - fat_detach(old_inode); - fat_attach(old_inode, old_sinfo.i_pos); - if (new_inode) { - fat_attach(new_inode, new_i_pos); - if (corrupt) - corrupt |= fat_sync_inode(new_inode); - } else { - /* - * If new entry was not sharing the data cluster, it - * shouldn't be serious corruption. - */ - int err2 = fat_remove_entries(new_dir, &sinfo); - if (corrupt) - corrupt |= err2; - sinfo.bh = NULL; - } - if (corrupt < 0) { - fat_fs_panic(new_dir->i_sb, - "%s: Filesystem corrupted (i_pos %lld)", - __func__, sinfo.i_pos); - } - goto out; -} - -static const struct inode_operations vfat_dir_inode_operations = { - .create = vfat_create, - .lookup = vfat_lookup, - .unlink = vfat_unlink, - .mkdir = vfat_mkdir, - .rmdir = vfat_rmdir, - .rename = vfat_rename, - .setattr = fat_setattr, - .getattr = fat_getattr, -}; - -static int vfat_fill_super(struct super_block *sb, void *data, int silent) -{ - int res; - - res = fat_fill_super(sb, data, silent, &vfat_dir_inode_operations, 1); - if (res) - return res; - - if (MSDOS_SB(sb)->options.name_check != 's') - sb->s_root->d_op = &vfat_dentry_ops[0]; - else - sb->s_root->d_op = &vfat_dentry_ops[2]; - - return 0; -} - -static int vfat_get_sb(struct file_system_type *fs_type, - int flags, const char *dev_name, - void *data, struct vfsmount *mnt) -{ - return get_sb_bdev(fs_type, flags, dev_name, data, vfat_fill_super, - mnt); -} - -static struct file_system_type vfat_fs_type = { - .owner = THIS_MODULE, - .name = "vfat", - .get_sb = vfat_get_sb, - .kill_sb = kill_block_super, - .fs_flags = FS_REQUIRES_DEV, -}; - -static int __init init_vfat_fs(void) -{ - return register_filesystem(&vfat_fs_type); -} - -static void __exit exit_vfat_fs(void) -{ - unregister_filesystem(&vfat_fs_type); -} - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("VFAT filesystem support"); -MODULE_AUTHOR("Gordon Chaffee"); - -module_init(init_vfat_fs) -module_exit(exit_vfat_fs) -- cgit v1.2.3 From 9e975dae2970d22557662761c8505ce9fd165684 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:46 -0800 Subject: fat: split include/msdos_fs.h This splits __KERNEL__ stuff in include/msdos_fs.h into fs/fat/fat.h. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/cache.c | 2 +- fs/fat/dir.c | 2 +- fs/fat/fat.h | 274 ++++++++++++++++++++++++++++++++++++++++++++++ fs/fat/fatent.c | 1 + fs/fat/file.c | 2 +- fs/fat/inode.c | 2 +- fs/fat/misc.c | 2 +- fs/fat/namei_msdos.c | 2 +- fs/fat/namei_vfat.c | 3 +- include/linux/msdos_fs.h | 276 +---------------------------------------------- 10 files changed, 284 insertions(+), 282 deletions(-) create mode 100644 fs/fat/fat.h diff --git a/fs/fat/cache.c b/fs/fat/cache.c index 3222f51c41cf..589edde9053c 100644 --- a/fs/fat/cache.c +++ b/fs/fat/cache.c @@ -9,8 +9,8 @@ */ #include -#include #include +#include "fat.h" /* this must be > 0. */ #define FAT_MAX_CACHE 8 diff --git a/fs/fat/dir.c b/fs/fat/dir.c index bae1c3292522..08b23ad25f1c 100644 --- a/fs/fat/dir.c +++ b/fs/fat/dir.c @@ -16,11 +16,11 @@ #include #include #include -#include #include #include #include #include +#include "fat.h" static inline loff_t fat_make_i_pos(struct super_block *sb, struct buffer_head *bh, diff --git a/fs/fat/fat.h b/fs/fat/fat.h new file mode 100644 index 000000000000..51f1c42ca5e3 --- /dev/null +++ b/fs/fat/fat.h @@ -0,0 +1,274 @@ +#ifndef _FAT_H +#define _FAT_H + +#include +#include +#include +#include +#include +#include + +/* + * vfat shortname flags + */ +#define VFAT_SFN_DISPLAY_LOWER 0x0001 /* convert to lowercase for display */ +#define VFAT_SFN_DISPLAY_WIN95 0x0002 /* emulate win95 rule for display */ +#define VFAT_SFN_DISPLAY_WINNT 0x0004 /* emulate winnt rule for display */ +#define VFAT_SFN_CREATE_WIN95 0x0100 /* emulate win95 rule for create */ +#define VFAT_SFN_CREATE_WINNT 0x0200 /* emulate winnt rule for create */ + +struct fat_mount_options { + uid_t fs_uid; + gid_t fs_gid; + unsigned short fs_fmask; + unsigned short fs_dmask; + unsigned short codepage; /* Codepage for shortname conversions */ + char *iocharset; /* Charset used for filename input/display */ + unsigned short shortname; /* flags for shortname display/create rule */ + unsigned char name_check; /* r = relaxed, n = normal, s = strict */ + unsigned short allow_utime;/* permission for setting the [am]time */ + unsigned quiet:1, /* set = fake successful chmods and chowns */ + showexec:1, /* set = only set x bit for com/exe/bat */ + sys_immutable:1, /* set = system files are immutable */ + dotsOK:1, /* set = hidden and system files are named '.filename' */ + isvfat:1, /* 0=no vfat long filename support, 1=vfat support */ + utf8:1, /* Use of UTF-8 character set (Default) */ + unicode_xlate:1, /* create escape sequences for unhandled Unicode */ + numtail:1, /* Does first alias have a numeric '~1' type tail? */ + flush:1, /* write things quickly */ + nocase:1, /* Does this need case conversion? 0=need case conversion*/ + usefree:1, /* Use free_clusters for FAT32 */ + tz_utc:1; /* Filesystem timestamps are in UTC */ +}; + +#define FAT_HASH_BITS 8 +#define FAT_HASH_SIZE (1UL << FAT_HASH_BITS) +#define FAT_HASH_MASK (FAT_HASH_SIZE-1) + +/* + * MS-DOS file system in-core superblock data + */ +struct msdos_sb_info { + unsigned short sec_per_clus; /* sectors/cluster */ + unsigned short cluster_bits; /* log2(cluster_size) */ + unsigned int cluster_size; /* cluster size */ + unsigned char fats,fat_bits; /* number of FATs, FAT bits (12 or 16) */ + unsigned short fat_start; + unsigned long fat_length; /* FAT start & length (sec.) */ + unsigned long dir_start; + unsigned short dir_entries; /* root dir start & entries */ + unsigned long data_start; /* first data sector */ + unsigned long max_cluster; /* maximum cluster number */ + unsigned long root_cluster; /* first cluster of the root directory */ + unsigned long fsinfo_sector; /* sector number of FAT32 fsinfo */ + struct mutex fat_lock; + unsigned int prev_free; /* previously allocated cluster number */ + unsigned int free_clusters; /* -1 if undefined */ + unsigned int free_clus_valid; /* is free_clusters valid? */ + struct fat_mount_options options; + struct nls_table *nls_disk; /* Codepage used on disk */ + struct nls_table *nls_io; /* Charset used for input and display */ + const void *dir_ops; /* Opaque; default directory operations */ + int dir_per_block; /* dir entries per block */ + int dir_per_block_bits; /* log2(dir_per_block) */ + + int fatent_shift; + struct fatent_operations *fatent_ops; + + spinlock_t inode_hash_lock; + struct hlist_head inode_hashtable[FAT_HASH_SIZE]; +}; + +#define FAT_CACHE_VALID 0 /* special case for valid cache */ + +/* + * MS-DOS file system inode data in memory + */ +struct msdos_inode_info { + spinlock_t cache_lru_lock; + struct list_head cache_lru; + int nr_caches; + /* for avoiding the race between fat_free() and fat_get_cluster() */ + unsigned int cache_valid_id; + + loff_t mmu_private; + int i_start; /* first cluster or 0 */ + int i_logstart; /* logical first cluster */ + int i_attrs; /* unused attribute bits */ + loff_t i_pos; /* on-disk position of directory entry or 0 */ + struct hlist_node i_fat_hash; /* hash by i_location */ + struct inode vfs_inode; +}; + +struct fat_slot_info { + loff_t i_pos; /* on-disk position of directory entry */ + loff_t slot_off; /* offset for slot or de start */ + int nr_slots; /* number of slots + 1(de) in filename */ + struct msdos_dir_entry *de; + struct buffer_head *bh; +}; + +static inline struct msdos_sb_info *MSDOS_SB(struct super_block *sb) +{ + return sb->s_fs_info; +} + +static inline struct msdos_inode_info *MSDOS_I(struct inode *inode) +{ + return container_of(inode, struct msdos_inode_info, vfs_inode); +} + +/* Return the FAT attribute byte for this inode */ +static inline u8 fat_attr(struct inode *inode) +{ + return ((inode->i_mode & S_IWUGO) ? ATTR_NONE : ATTR_RO) | + (S_ISDIR(inode->i_mode) ? ATTR_DIR : ATTR_NONE) | + MSDOS_I(inode)->i_attrs; +} + +static inline unsigned char fat_checksum(const __u8 *name) +{ + unsigned char s = name[0]; + s = (s<<7) + (s>>1) + name[1]; s = (s<<7) + (s>>1) + name[2]; + s = (s<<7) + (s>>1) + name[3]; s = (s<<7) + (s>>1) + name[4]; + s = (s<<7) + (s>>1) + name[5]; s = (s<<7) + (s>>1) + name[6]; + s = (s<<7) + (s>>1) + name[7]; s = (s<<7) + (s>>1) + name[8]; + s = (s<<7) + (s>>1) + name[9]; s = (s<<7) + (s>>1) + name[10]; + return s; +} + +static inline sector_t fat_clus_to_blknr(struct msdos_sb_info *sbi, int clus) +{ + return ((sector_t)clus - FAT_START_ENT) * sbi->sec_per_clus + + sbi->data_start; +} + +static inline void fat16_towchar(wchar_t *dst, const __u8 *src, size_t len) +{ +#ifdef __BIG_ENDIAN + while (len--) { + *dst++ = src[0] | (src[1] << 8); + src += 2; + } +#else + memcpy(dst, src, len * 2); +#endif +} + +static inline void fatwchar_to16(__u8 *dst, const wchar_t *src, size_t len) +{ +#ifdef __BIG_ENDIAN + while (len--) { + dst[0] = *src & 0x00FF; + dst[1] = (*src & 0xFF00) >> 8; + dst += 2; + src++; + } +#else + memcpy(dst, src, len * 2); +#endif +} + +/* fat/cache.c */ +extern void fat_cache_inval_inode(struct inode *inode); +extern int fat_get_cluster(struct inode *inode, int cluster, + int *fclus, int *dclus); +extern int fat_bmap(struct inode *inode, sector_t sector, sector_t *phys, + unsigned long *mapped_blocks); + +/* fat/dir.c */ +extern const struct file_operations fat_dir_operations; +extern int fat_search_long(struct inode *inode, const unsigned char *name, + int name_len, struct fat_slot_info *sinfo); +extern int fat_dir_empty(struct inode *dir); +extern int fat_subdirs(struct inode *dir); +extern int fat_scan(struct inode *dir, const unsigned char *name, + struct fat_slot_info *sinfo); +extern int fat_get_dotdot_entry(struct inode *dir, struct buffer_head **bh, + struct msdos_dir_entry **de, loff_t *i_pos); +extern int fat_alloc_new_dir(struct inode *dir, struct timespec *ts); +extern int fat_add_entries(struct inode *dir, void *slots, int nr_slots, + struct fat_slot_info *sinfo); +extern int fat_remove_entries(struct inode *dir, struct fat_slot_info *sinfo); + +/* fat/fatent.c */ +struct fat_entry { + int entry; + union { + u8 *ent12_p[2]; + __le16 *ent16_p; + __le32 *ent32_p; + } u; + int nr_bhs; + struct buffer_head *bhs[2]; +}; + +static inline void fatent_init(struct fat_entry *fatent) +{ + fatent->nr_bhs = 0; + fatent->entry = 0; + fatent->u.ent32_p = NULL; + fatent->bhs[0] = fatent->bhs[1] = NULL; +} + +static inline void fatent_set_entry(struct fat_entry *fatent, int entry) +{ + fatent->entry = entry; + fatent->u.ent32_p = NULL; +} + +static inline void fatent_brelse(struct fat_entry *fatent) +{ + int i; + fatent->u.ent32_p = NULL; + for (i = 0; i < fatent->nr_bhs; i++) + brelse(fatent->bhs[i]); + fatent->nr_bhs = 0; + fatent->bhs[0] = fatent->bhs[1] = NULL; +} + +extern void fat_ent_access_init(struct super_block *sb); +extern int fat_ent_read(struct inode *inode, struct fat_entry *fatent, + int entry); +extern int fat_ent_write(struct inode *inode, struct fat_entry *fatent, + int new, int wait); +extern int fat_alloc_clusters(struct inode *inode, int *cluster, + int nr_cluster); +extern int fat_free_clusters(struct inode *inode, int cluster); +extern int fat_count_free_clusters(struct super_block *sb); + +/* fat/file.c */ +extern int fat_generic_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); +extern const struct file_operations fat_file_operations; +extern const struct inode_operations fat_file_inode_operations; +extern int fat_setattr(struct dentry * dentry, struct iattr * attr); +extern void fat_truncate(struct inode *inode); +extern int fat_getattr(struct vfsmount *mnt, struct dentry *dentry, + struct kstat *stat); + +/* fat/inode.c */ +extern void fat_attach(struct inode *inode, loff_t i_pos); +extern void fat_detach(struct inode *inode); +extern struct inode *fat_iget(struct super_block *sb, loff_t i_pos); +extern struct inode *fat_build_inode(struct super_block *sb, + struct msdos_dir_entry *de, loff_t i_pos); +extern int fat_sync_inode(struct inode *inode); +extern int fat_fill_super(struct super_block *sb, void *data, int silent, + const struct inode_operations *fs_dir_inode_ops, int isvfat); + +extern int fat_flush_inodes(struct super_block *sb, struct inode *i1, + struct inode *i2); +/* fat/misc.c */ +extern void fat_fs_panic(struct super_block *s, const char *fmt, ...); +extern void fat_clusters_flush(struct super_block *sb); +extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster); +extern int date_dos2unix(unsigned short time, unsigned short date, int tz_utc); +extern void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date, + int tz_utc); +extern int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs); + +int fat_cache_init(void); +void fat_cache_destroy(void); + +#endif /* !_FAT_H */ diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c index fb98b3d847ed..5b5f49061b7c 100644 --- a/fs/fat/fatent.c +++ b/fs/fat/fatent.c @@ -7,6 +7,7 @@ #include #include #include +#include "fat.h" struct fatent_operations { void (*ent_blocknr)(struct super_block *, int, int *, sector_t *); diff --git a/fs/fat/file.c b/fs/fat/file.c index ddde37025ca6..b21973f266a1 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -10,13 +10,13 @@ #include #include #include -#include #include #include #include #include #include #include +#include "fat.h" int fat_generic_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 2b2eec1283bf..3921de2013a4 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include @@ -28,6 +27,7 @@ #include #include #include +#include "fat.h" #ifndef CONFIG_FAT_DEFAULT_IOCHARSET /* if user don't select VFAT, this is undefined. */ diff --git a/fs/fat/misc.c b/fs/fat/misc.c index 79fb98ad36d4..91ad9be18ff9 100644 --- a/fs/fat/misc.c +++ b/fs/fat/misc.c @@ -8,8 +8,8 @@ #include #include -#include #include +#include "fat.h" /* * fat_fs_panic reports a severe file system problem and sets the file system diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c index e844b9809d27..c0a4d5cd99b2 100644 --- a/fs/fat/namei_msdos.c +++ b/fs/fat/namei_msdos.c @@ -9,8 +9,8 @@ #include #include #include -#include #include +#include "fat.h" /* Characters that are undesirable in an MS-DOS file name */ static unsigned char bad_chars[] = "*?<>|\""; diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c index 155c10b4adbd..facf3bf0211a 100644 --- a/fs/fat/namei_vfat.c +++ b/fs/fat/namei_vfat.c @@ -16,14 +16,13 @@ */ #include - #include -#include #include #include #include #include #include +#include "fat.h" static int vfat_revalidate(struct dentry *dentry, struct nameidata *nd) { diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h index ba63858056c7..0982fb47a90d 100644 --- a/include/linux/msdos_fs.h +++ b/include/linux/msdos_fs.h @@ -167,282 +167,10 @@ struct msdos_dir_slot { }; #ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -/* - * vfat shortname flags - */ -#define VFAT_SFN_DISPLAY_LOWER 0x0001 /* convert to lowercase for display */ -#define VFAT_SFN_DISPLAY_WIN95 0x0002 /* emulate win95 rule for display */ -#define VFAT_SFN_DISPLAY_WINNT 0x0004 /* emulate winnt rule for display */ -#define VFAT_SFN_CREATE_WIN95 0x0100 /* emulate win95 rule for create */ -#define VFAT_SFN_CREATE_WINNT 0x0200 /* emulate winnt rule for create */ - -struct fat_mount_options { - uid_t fs_uid; - gid_t fs_gid; - unsigned short fs_fmask; - unsigned short fs_dmask; - unsigned short codepage; /* Codepage for shortname conversions */ - char *iocharset; /* Charset used for filename input/display */ - unsigned short shortname; /* flags for shortname display/create rule */ - unsigned char name_check; /* r = relaxed, n = normal, s = strict */ - unsigned short allow_utime;/* permission for setting the [am]time */ - unsigned quiet:1, /* set = fake successful chmods and chowns */ - showexec:1, /* set = only set x bit for com/exe/bat */ - sys_immutable:1, /* set = system files are immutable */ - dotsOK:1, /* set = hidden and system files are named '.filename' */ - isvfat:1, /* 0=no vfat long filename support, 1=vfat support */ - utf8:1, /* Use of UTF-8 character set (Default) */ - unicode_xlate:1, /* create escape sequences for unhandled Unicode */ - numtail:1, /* Does first alias have a numeric '~1' type tail? */ - flush:1, /* write things quickly */ - nocase:1, /* Does this need case conversion? 0=need case conversion*/ - usefree:1, /* Use free_clusters for FAT32 */ - tz_utc:1; /* Filesystem timestamps are in UTC */ -}; - -#define FAT_HASH_BITS 8 -#define FAT_HASH_SIZE (1UL << FAT_HASH_BITS) -#define FAT_HASH_MASK (FAT_HASH_SIZE-1) - -/* - * MS-DOS file system in-core superblock data - */ -struct msdos_sb_info { - unsigned short sec_per_clus; /* sectors/cluster */ - unsigned short cluster_bits; /* log2(cluster_size) */ - unsigned int cluster_size; /* cluster size */ - unsigned char fats,fat_bits; /* number of FATs, FAT bits (12 or 16) */ - unsigned short fat_start; - unsigned long fat_length; /* FAT start & length (sec.) */ - unsigned long dir_start; - unsigned short dir_entries; /* root dir start & entries */ - unsigned long data_start; /* first data sector */ - unsigned long max_cluster; /* maximum cluster number */ - unsigned long root_cluster; /* first cluster of the root directory */ - unsigned long fsinfo_sector; /* sector number of FAT32 fsinfo */ - struct mutex fat_lock; - unsigned int prev_free; /* previously allocated cluster number */ - unsigned int free_clusters; /* -1 if undefined */ - unsigned int free_clus_valid; /* is free_clusters valid? */ - struct fat_mount_options options; - struct nls_table *nls_disk; /* Codepage used on disk */ - struct nls_table *nls_io; /* Charset used for input and display */ - const void *dir_ops; /* Opaque; default directory operations */ - int dir_per_block; /* dir entries per block */ - int dir_per_block_bits; /* log2(dir_per_block) */ - - int fatent_shift; - struct fatent_operations *fatent_ops; - - spinlock_t inode_hash_lock; - struct hlist_head inode_hashtable[FAT_HASH_SIZE]; -}; - -#define FAT_CACHE_VALID 0 /* special case for valid cache */ - -/* - * MS-DOS file system inode data in memory - */ -struct msdos_inode_info { - spinlock_t cache_lru_lock; - struct list_head cache_lru; - int nr_caches; - /* for avoiding the race between fat_free() and fat_get_cluster() */ - unsigned int cache_valid_id; - - loff_t mmu_private; - int i_start; /* first cluster or 0 */ - int i_logstart; /* logical first cluster */ - int i_attrs; /* unused attribute bits */ - loff_t i_pos; /* on-disk position of directory entry or 0 */ - struct hlist_node i_fat_hash; /* hash by i_location */ - struct inode vfs_inode; -}; - -struct fat_slot_info { - loff_t i_pos; /* on-disk position of directory entry */ - loff_t slot_off; /* offset for slot or de start */ - int nr_slots; /* number of slots + 1(de) in filename */ - struct msdos_dir_entry *de; - struct buffer_head *bh; -}; - -static inline struct msdos_sb_info *MSDOS_SB(struct super_block *sb) -{ - return sb->s_fs_info; -} - -static inline struct msdos_inode_info *MSDOS_I(struct inode *inode) -{ - return container_of(inode, struct msdos_inode_info, vfs_inode); -} - -/* Return the FAT attribute byte for this inode */ -static inline u8 fat_attr(struct inode *inode) -{ - return ((inode->i_mode & S_IWUGO) ? ATTR_NONE : ATTR_RO) | - (S_ISDIR(inode->i_mode) ? ATTR_DIR : ATTR_NONE) | - MSDOS_I(inode)->i_attrs; -} - -static inline unsigned char fat_checksum(const __u8 *name) -{ - unsigned char s = name[0]; - s = (s<<7) + (s>>1) + name[1]; s = (s<<7) + (s>>1) + name[2]; - s = (s<<7) + (s>>1) + name[3]; s = (s<<7) + (s>>1) + name[4]; - s = (s<<7) + (s>>1) + name[5]; s = (s<<7) + (s>>1) + name[6]; - s = (s<<7) + (s>>1) + name[7]; s = (s<<7) + (s>>1) + name[8]; - s = (s<<7) + (s>>1) + name[9]; s = (s<<7) + (s>>1) + name[10]; - return s; -} - -static inline sector_t fat_clus_to_blknr(struct msdos_sb_info *sbi, int clus) -{ - return ((sector_t)clus - FAT_START_ENT) * sbi->sec_per_clus - + sbi->data_start; -} - -static inline void fat16_towchar(wchar_t *dst, const __u8 *src, size_t len) -{ -#ifdef __BIG_ENDIAN - while (len--) { - *dst++ = src[0] | (src[1] << 8); - src += 2; - } -#else - memcpy(dst, src, len * 2); -#endif -} - -static inline void fatwchar_to16(__u8 *dst, const wchar_t *src, size_t len) -{ -#ifdef __BIG_ENDIAN - while (len--) { - dst[0] = *src & 0x00FF; - dst[1] = (*src & 0xFF00) >> 8; - dst += 2; - src++; - } -#else - memcpy(dst, src, len * 2); -#endif -} - /* media of boot sector */ static inline int fat_valid_media(u8 media) { return 0xf8 <= media || media == 0xf0; } - -/* fat/cache.c */ -extern void fat_cache_inval_inode(struct inode *inode); -extern int fat_get_cluster(struct inode *inode, int cluster, - int *fclus, int *dclus); -extern int fat_bmap(struct inode *inode, sector_t sector, sector_t *phys, - unsigned long *mapped_blocks); - -/* fat/dir.c */ -extern const struct file_operations fat_dir_operations; -extern int fat_search_long(struct inode *inode, const unsigned char *name, - int name_len, struct fat_slot_info *sinfo); -extern int fat_dir_empty(struct inode *dir); -extern int fat_subdirs(struct inode *dir); -extern int fat_scan(struct inode *dir, const unsigned char *name, - struct fat_slot_info *sinfo); -extern int fat_get_dotdot_entry(struct inode *dir, struct buffer_head **bh, - struct msdos_dir_entry **de, loff_t *i_pos); -extern int fat_alloc_new_dir(struct inode *dir, struct timespec *ts); -extern int fat_add_entries(struct inode *dir, void *slots, int nr_slots, - struct fat_slot_info *sinfo); -extern int fat_remove_entries(struct inode *dir, struct fat_slot_info *sinfo); - -/* fat/fatent.c */ -struct fat_entry { - int entry; - union { - u8 *ent12_p[2]; - __le16 *ent16_p; - __le32 *ent32_p; - } u; - int nr_bhs; - struct buffer_head *bhs[2]; -}; - -static inline void fatent_init(struct fat_entry *fatent) -{ - fatent->nr_bhs = 0; - fatent->entry = 0; - fatent->u.ent32_p = NULL; - fatent->bhs[0] = fatent->bhs[1] = NULL; -} - -static inline void fatent_set_entry(struct fat_entry *fatent, int entry) -{ - fatent->entry = entry; - fatent->u.ent32_p = NULL; -} - -static inline void fatent_brelse(struct fat_entry *fatent) -{ - int i; - fatent->u.ent32_p = NULL; - for (i = 0; i < fatent->nr_bhs; i++) - brelse(fatent->bhs[i]); - fatent->nr_bhs = 0; - fatent->bhs[0] = fatent->bhs[1] = NULL; -} - -extern void fat_ent_access_init(struct super_block *sb); -extern int fat_ent_read(struct inode *inode, struct fat_entry *fatent, - int entry); -extern int fat_ent_write(struct inode *inode, struct fat_entry *fatent, - int new, int wait); -extern int fat_alloc_clusters(struct inode *inode, int *cluster, - int nr_cluster); -extern int fat_free_clusters(struct inode *inode, int cluster); -extern int fat_count_free_clusters(struct super_block *sb); - -/* fat/file.c */ -extern int fat_generic_ioctl(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern const struct file_operations fat_file_operations; -extern const struct inode_operations fat_file_inode_operations; -extern int fat_setattr(struct dentry * dentry, struct iattr * attr); -extern void fat_truncate(struct inode *inode); -extern int fat_getattr(struct vfsmount *mnt, struct dentry *dentry, - struct kstat *stat); - -/* fat/inode.c */ -extern void fat_attach(struct inode *inode, loff_t i_pos); -extern void fat_detach(struct inode *inode); -extern struct inode *fat_iget(struct super_block *sb, loff_t i_pos); -extern struct inode *fat_build_inode(struct super_block *sb, - struct msdos_dir_entry *de, loff_t i_pos); -extern int fat_sync_inode(struct inode *inode); -extern int fat_fill_super(struct super_block *sb, void *data, int silent, - const struct inode_operations *fs_dir_inode_ops, int isvfat); - -extern int fat_flush_inodes(struct super_block *sb, struct inode *i1, - struct inode *i2); -/* fat/misc.c */ -extern void fat_fs_panic(struct super_block *s, const char *fmt, ...); -extern void fat_clusters_flush(struct super_block *sb); -extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster); -extern int date_dos2unix(unsigned short time, unsigned short date, int tz_utc); -extern void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date, - int tz_utc); -extern int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs); - -int fat_cache_init(void); -void fat_cache_destroy(void); - -#endif /* __KERNEL__ */ - -#endif +#endif /* !__KERNEL__ */ +#endif /* !_LINUX_MSDOS_FS_H */ -- cgit v1.2.3 From 7decd1cb0305b97243f283fa7f4baf5fe613edeb Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:47 -0800 Subject: fat: Fix and cleanup timestamp conversion This cleans date_dos2unix()/fat_date_unix2dos() up. New code should be much more readable. And this fixes those old functions. Those doesn't handle 2100 correctly. 2100 isn't leap year, but old one handles it as leap year. Also, with this, centi sec is handled and is fixed. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/dir.c | 6 ++- fs/fat/fat.h | 7 +-- fs/fat/inode.c | 34 ++++-------- fs/fat/misc.c | 148 +++++++++++++++++++++++++++++++++++++-------------- fs/fat/namei_msdos.c | 2 +- fs/fat/namei_vfat.c | 5 +- 6 files changed, 130 insertions(+), 72 deletions(-) diff --git a/fs/fat/dir.c b/fs/fat/dir.c index 08b23ad25f1c..a601c6d45bc0 100644 --- a/fs/fat/dir.c +++ b/fs/fat/dir.c @@ -1089,6 +1089,7 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts) struct msdos_dir_entry *de; sector_t blknr; __le16 date, time; + u8 time_cs; int err, cluster; err = fat_alloc_clusters(dir, &cluster, 1); @@ -1102,7 +1103,7 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts) goto error_free; } - fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc); + fat_time_unix2fat(sbi, ts, &time, &date, &time_cs); de = (struct msdos_dir_entry *)bhs[0]->b_data; /* filling the new directory slots ("." and ".." entries) */ @@ -1112,13 +1113,14 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts) de[0].lcase = de[1].lcase = 0; de[0].time = de[1].time = time; de[0].date = de[1].date = date; - de[0].ctime_cs = de[1].ctime_cs = 0; if (sbi->options.isvfat) { /* extra timestamps */ de[0].ctime = de[1].ctime = time; + de[0].ctime_cs = de[1].ctime_cs = time_cs; de[0].adate = de[0].cdate = de[1].adate = de[1].cdate = date; } else { de[0].ctime = de[1].ctime = 0; + de[0].ctime_cs = de[1].ctime_cs = 0; de[0].adate = de[0].cdate = de[1].adate = de[1].cdate = 0; } de[0].start = cpu_to_le16(cluster); diff --git a/fs/fat/fat.h b/fs/fat/fat.h index 51f1c42ca5e3..a2a570f81719 100644 --- a/fs/fat/fat.h +++ b/fs/fat/fat.h @@ -263,9 +263,10 @@ extern int fat_flush_inodes(struct super_block *sb, struct inode *i1, extern void fat_fs_panic(struct super_block *s, const char *fmt, ...); extern void fat_clusters_flush(struct super_block *sb); extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster); -extern int date_dos2unix(unsigned short time, unsigned short date, int tz_utc); -extern void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date, - int tz_utc); +extern void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts, + __le16 __time, __le16 __date, u8 time_cs); +extern void fat_time_unix2fat(struct msdos_sb_info *sbi, struct timespec *ts, + __le16 *time, __le16 *date, u8 *time_cs); extern int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs); int fat_cache_init(void); diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 3921de2013a4..079d9d5e0d36 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -381,22 +381,12 @@ static int fat_fill_inode(struct inode *inode, struct msdos_dir_entry *de) MSDOS_I(inode)->i_attrs = de->attr & ATTR_UNUSED; inode->i_blocks = ((inode->i_size + (sbi->cluster_size - 1)) & ~((loff_t)sbi->cluster_size - 1)) >> 9; - inode->i_mtime.tv_sec = - date_dos2unix(le16_to_cpu(de->time), le16_to_cpu(de->date), - sbi->options.tz_utc); - inode->i_mtime.tv_nsec = 0; + + fat_time_fat2unix(sbi, &inode->i_mtime, de->time, de->date, 0); if (sbi->options.isvfat) { - int secs = de->ctime_cs / 100; - int csecs = de->ctime_cs % 100; - inode->i_ctime.tv_sec = - date_dos2unix(le16_to_cpu(de->ctime), - le16_to_cpu(de->cdate), - sbi->options.tz_utc) + secs; - inode->i_ctime.tv_nsec = csecs * 10000000; - inode->i_atime.tv_sec = - date_dos2unix(0, le16_to_cpu(de->adate), - sbi->options.tz_utc); - inode->i_atime.tv_nsec = 0; + fat_time_fat2unix(sbi, &inode->i_ctime, de->ctime, + de->cdate, de->ctime_cs); + fat_time_fat2unix(sbi, &inode->i_atime, 0, de->adate, 0); } else inode->i_ctime = inode->i_atime = inode->i_mtime; @@ -591,16 +581,14 @@ retry: raw_entry->attr = fat_attr(inode); raw_entry->start = cpu_to_le16(MSDOS_I(inode)->i_logstart); raw_entry->starthi = cpu_to_le16(MSDOS_I(inode)->i_logstart >> 16); - fat_date_unix2dos(inode->i_mtime.tv_sec, &raw_entry->time, - &raw_entry->date, sbi->options.tz_utc); + fat_time_unix2fat(sbi, &inode->i_mtime, &raw_entry->time, + &raw_entry->date, NULL); if (sbi->options.isvfat) { __le16 atime; - fat_date_unix2dos(inode->i_ctime.tv_sec, &raw_entry->ctime, - &raw_entry->cdate, sbi->options.tz_utc); - fat_date_unix2dos(inode->i_atime.tv_sec, &atime, - &raw_entry->adate, sbi->options.tz_utc); - raw_entry->ctime_cs = (inode->i_ctime.tv_sec & 1) * 100 + - inode->i_ctime.tv_nsec / 10000000; + fat_time_unix2fat(sbi, &inode->i_ctime, &raw_entry->ctime, + &raw_entry->cdate, &raw_entry->ctime_cs); + fat_time_unix2fat(sbi, &inode->i_atime, &atime, + &raw_entry->adate, NULL); } spin_unlock(&sbi->inode_hash_lock); mark_buffer_dirty(bh); diff --git a/fs/fat/misc.c b/fs/fat/misc.c index 91ad9be18ff9..a191e79e66a9 100644 --- a/fs/fat/misc.c +++ b/fs/fat/misc.c @@ -135,65 +135,131 @@ int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster) extern struct timezone sys_tz; +/* + * The epoch of FAT timestamp is 1980. + * : bits : value + * date: 0 - 4: day (1 - 31) + * date: 5 - 8: month (1 - 12) + * date: 9 - 15: year (0 - 127) from 1980 + * time: 0 - 4: sec (0 - 29) 2sec counts + * time: 5 - 10: min (0 - 59) + * time: 11 - 15: hour (0 - 23) + */ +#define SECS_PER_MIN 60 +#define SECS_PER_HOUR (60 * 60) +#define SECS_PER_DAY (SECS_PER_HOUR * 24) +#define UNIX_SECS_1980 315532800L +#if BITS_PER_LONG == 64 +#define UNIX_SECS_2108 4354819200L +#endif +/* days between 1.1.70 and 1.1.80 (2 leap days) */ +#define DAYS_DELTA (365 * 10 + 2) +/* 120 (2100 - 1980) isn't leap year */ +#define YEAR_2100 120 +#define IS_LEAP_YEAR(y) (!((y) & 3) && (y) != YEAR_2100) + /* Linear day numbers of the respective 1sts in non-leap years. */ -static int day_n[] = { - /* Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec */ - 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 0, 0, 0, 0 +static time_t days_in_year[] = { + /* Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec */ + 0, 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 0, 0, 0, }; -/* Convert a MS-DOS time/date pair to a UNIX date (seconds since 1 1 70). */ -int date_dos2unix(unsigned short time, unsigned short date, int tz_utc) +/* Convert a FAT time/date pair to a UNIX date (seconds since 1 1 70). */ +void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts, + __le16 __time, __le16 __date, u8 time_cs) { - int month, year, secs; + u16 time = le16_to_cpu(__time), date = le16_to_cpu(__date); + time_t second, day, leap_day, month, year; - /* - * first subtract and mask after that... Otherwise, if - * date == 0, bad things happen - */ - month = ((date >> 5) - 1) & 15; - year = date >> 9; - secs = (time & 31)*2+60*((time >> 5) & 63)+(time >> 11)*3600+86400* - ((date & 31)-1+day_n[month]+(year/4)+year*365-((year & 3) == 0 && - month < 2 ? 1 : 0)+3653); - /* days since 1.1.70 plus 80's leap day */ - if (!tz_utc) - secs += sys_tz.tz_minuteswest*60; - return secs; + year = date >> 9; + month = max(1, (date >> 5) & 0xf); + day = max(1, date & 0x1f) - 1; + + leap_day = (year + 3) / 4; + if (year > YEAR_2100) /* 2100 isn't leap year */ + leap_day--; + if (IS_LEAP_YEAR(year) && month > 2) + leap_day++; + + second = (time & 0x1f) << 1; + second += ((time >> 5) & 0x3f) * SECS_PER_MIN; + second += (time >> 11) * SECS_PER_HOUR; + second += (year * 365 + leap_day + + days_in_year[month] + day + + DAYS_DELTA) * SECS_PER_DAY; + + if (!sbi->options.tz_utc) + second += sys_tz.tz_minuteswest * SECS_PER_MIN; + + if (time_cs) { + ts->tv_sec = second + (time_cs / 100); + ts->tv_nsec = (time_cs % 100) * 10000000; + } else { + ts->tv_sec = second; + ts->tv_nsec = 0; + } } -/* Convert linear UNIX date to a MS-DOS time/date pair. */ -void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date, int tz_utc) +/* Convert linear UNIX date to a FAT time/date pair. */ +void fat_time_unix2fat(struct msdos_sb_info *sbi, struct timespec *ts, + __le16 *time, __le16 *date, u8 *time_cs) { - int day, year, nl_day, month; + time_t second = ts->tv_sec; + time_t day, leap_day, month, year; - if (!tz_utc) - unix_date -= sys_tz.tz_minuteswest*60; + if (!sbi->options.tz_utc) + second -= sys_tz.tz_minuteswest * SECS_PER_MIN; /* Jan 1 GMT 00:00:00 1980. But what about another time zone? */ - if (unix_date < 315532800) - unix_date = 315532800; - - *time = cpu_to_le16((unix_date % 60)/2+(((unix_date/60) % 60) << 5)+ - (((unix_date/3600) % 24) << 11)); - day = unix_date/86400-3652; - year = day/365; - if ((year+3)/4+365*year > day) + if (second < UNIX_SECS_1980) { + *time = 0; + *date = cpu_to_le16((0 << 9) | (1 << 5) | 1); + if (time_cs) + *time_cs = 0; + return; + } +#if BITS_PER_LONG == 64 + if (second >= UNIX_SECS_2108) { + *time = cpu_to_le16((23 << 11) | (59 << 5) | 29); + *date = cpu_to_le16((127 << 9) | (12 << 5) | 31); + if (time_cs) + *time_cs = 199; + return; + } +#endif + + day = second / SECS_PER_DAY - DAYS_DELTA; + year = day / 365; + leap_day = (year + 3) / 4; + if (year > YEAR_2100) /* 2100 isn't leap year */ + leap_day--; + if (year * 365 + leap_day > day) year--; - day -= (year+3)/4+365*year; - if (day == 59 && !(year & 3)) { - nl_day = day; + leap_day = (year + 3) / 4; + if (year > YEAR_2100) /* 2100 isn't leap year */ + leap_day--; + day -= year * 365 + leap_day; + + if (IS_LEAP_YEAR(year) && day == days_in_year[3]) { month = 2; } else { - nl_day = (year & 3) || day <= 59 ? day : day-1; - for (month = 0; month < 12; month++) { - if (day_n[month] > nl_day) + if (IS_LEAP_YEAR(year) && day > days_in_year[3]) + day--; + for (month = 1; month < 12; month++) { + if (days_in_year[month + 1] > day) break; } } - *date = cpu_to_le16(nl_day-day_n[month-1]+1+(month << 5)+(year << 9)); -} + day -= days_in_year[month]; -EXPORT_SYMBOL_GPL(fat_date_unix2dos); + *time = cpu_to_le16(((second / SECS_PER_HOUR) % 24) << 11 + | ((second / SECS_PER_MIN) % 60) << 5 + | (second % SECS_PER_MIN) >> 1); + *date = cpu_to_le16((year << 9) | (month << 5) | (day + 1)); + if (time_cs) + *time_cs = (ts->tv_sec & 1) * 100 + ts->tv_nsec / 10000000; +} +EXPORT_SYMBOL_GPL(fat_time_unix2fat); int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs) { diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c index c0a4d5cd99b2..e92e8158ebaf 100644 --- a/fs/fat/namei_msdos.c +++ b/fs/fat/namei_msdos.c @@ -247,7 +247,7 @@ static int msdos_add_entry(struct inode *dir, const unsigned char *name, if (is_hid) de.attr |= ATTR_HIDDEN; de.lcase = 0; - fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc); + fat_time_unix2fat(sbi, ts, &time, &date, NULL); de.cdate = de.adate = 0; de.ctime = 0; de.ctime_cs = 0; diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c index facf3bf0211a..1536bc3ca0f0 100644 --- a/fs/fat/namei_vfat.c +++ b/fs/fat/namei_vfat.c @@ -568,6 +568,7 @@ static int vfat_build_slots(struct inode *dir, const unsigned char *name, unsigned char msdos_name[MSDOS_NAME]; wchar_t *uname; __le16 time, date; + u8 time_cs; int err, ulen, usize, i; loff_t offset; @@ -620,10 +621,10 @@ shortname: memcpy(de->name, msdos_name, MSDOS_NAME); de->attr = is_dir ? ATTR_DIR : ATTR_ARCH; de->lcase = lcase; - fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc); + fat_time_unix2fat(sbi, ts, &time, &date, &time_cs); de->time = de->ctime = time; de->date = de->cdate = de->adate = date; - de->ctime_cs = 0; + de->ctime_cs = time_cs; de->start = cpu_to_le16(cluster); de->starthi = cpu_to_le16(cluster >> 16); de->size = 0; -- cgit v1.2.3 From 53472bc8f810d2fb507593ea03703670506a668d Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:47 -0800 Subject: fat: use generic_file_llseek() for directory Since fat_dir_ioctl() was already fixed (i.e. called under ->i_mutex), and __fat_readdir() doesn't take BKL anymore. So, BKL for ->llseek() is pointless, and we have to use generic_file_llseek(). Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/dir.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/fat/dir.c b/fs/fat/dir.c index a601c6d45bc0..931dd28b5289 100644 --- a/fs/fat/dir.c +++ b/fs/fat/dir.c @@ -832,6 +832,7 @@ static long fat_compat_dir_ioctl(struct file *filp, unsigned cmd, #endif /* CONFIG_COMPAT */ const struct file_operations fat_dir_operations = { + .llseek = generic_file_llseek, .read = generic_read_dir, .readdir = fat_readdir, .ioctl = fat_dir_ioctl, -- cgit v1.2.3 From 52e9d9f4b32a3bec91feb76c84e37b7dcffe5040 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Thu, 6 Nov 2008 12:53:48 -0800 Subject: fat: cleanup fat_parse_long() error handling Coverity CID 2332 & 2333 RESOURCE_LEAK In fat_search_long() if fat_parse_long() returns a -ve value we return without first freeing unicode. This patch free's them on this error path. The above was false positive on current tree, but this change is more clean, so apply as cleanup. [hirofumi@mail.parknet.co.jp: fix coding style] Signed-off-by: Darren Jenkins Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/dir.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/fat/dir.c b/fs/fat/dir.c index 931dd28b5289..140fc39e2307 100644 --- a/fs/fat/dir.c +++ b/fs/fat/dir.c @@ -373,9 +373,10 @@ parse_record: if (de->attr == ATTR_EXT) { int status = fat_parse_long(inode, &cpos, &bh, &de, &unicode, &nr_slots); - if (status < 0) - return status; - else if (status == PARSE_INVALID) + if (status < 0) { + err = status; + goto end_of_dir; + } else if (status == PARSE_INVALID) continue; else if (status == PARSE_NOT_LONGNAME) goto parse_record; -- cgit v1.2.3 From d3dfa8228f87ab9960ab8b4718013d68e3c25a43 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:49 -0800 Subject: fat: improve fat_hash() fat_hash() is using the algorithm known as bad. Instead of it, this uses hash_32(). The following is the summary of test. old hash: hash func (1000 times): 33489 cycles total inodes in hash table: 70926 largest bucket contains: 696 smallest bucket contains: 54 new hash: hash func (1000 times): 33129 cycles total inodes in hash table: 70926 largest bucket contains: 315 smallest bucket contains: 236 Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/fat.h | 1 - fs/fat/inode.c | 18 +++++++----------- 2 files changed, 7 insertions(+), 12 deletions(-) diff --git a/fs/fat/fat.h b/fs/fat/fat.h index a2a570f81719..2b8e94c3eef4 100644 --- a/fs/fat/fat.h +++ b/fs/fat/fat.h @@ -43,7 +43,6 @@ struct fat_mount_options { #define FAT_HASH_BITS 8 #define FAT_HASH_SIZE (1UL << FAT_HASH_BITS) -#define FAT_HASH_MASK (FAT_HASH_SIZE-1) /* * MS-DOS file system in-core superblock data diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 079d9d5e0d36..f58cd48d98b8 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include "fat.h" @@ -247,25 +248,21 @@ static void fat_hash_init(struct super_block *sb) INIT_HLIST_HEAD(&sbi->inode_hashtable[i]); } -static inline unsigned long fat_hash(struct super_block *sb, loff_t i_pos) +static inline unsigned long fat_hash(loff_t i_pos) { - unsigned long tmp = (unsigned long)i_pos | (unsigned long) sb; - tmp = tmp + (tmp >> FAT_HASH_BITS) + (tmp >> FAT_HASH_BITS * 2); - return tmp & FAT_HASH_MASK; + return hash_32(i_pos, FAT_HASH_BITS); } void fat_attach(struct inode *inode, loff_t i_pos) { - struct super_block *sb = inode->i_sb; - struct msdos_sb_info *sbi = MSDOS_SB(sb); + struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb); + struct hlist_head *head = sbi->inode_hashtable + fat_hash(i_pos); spin_lock(&sbi->inode_hash_lock); MSDOS_I(inode)->i_pos = i_pos; - hlist_add_head(&MSDOS_I(inode)->i_fat_hash, - sbi->inode_hashtable + fat_hash(sb, i_pos)); + hlist_add_head(&MSDOS_I(inode)->i_fat_hash, head); spin_unlock(&sbi->inode_hash_lock); } - EXPORT_SYMBOL_GPL(fat_attach); void fat_detach(struct inode *inode) @@ -276,13 +273,12 @@ void fat_detach(struct inode *inode) hlist_del_init(&MSDOS_I(inode)->i_fat_hash); spin_unlock(&sbi->inode_hash_lock); } - EXPORT_SYMBOL_GPL(fat_detach); struct inode *fat_iget(struct super_block *sb, loff_t i_pos) { struct msdos_sb_info *sbi = MSDOS_SB(sb); - struct hlist_head *head = sbi->inode_hashtable + fat_hash(sb, i_pos); + struct hlist_head *head = sbi->inode_hashtable + fat_hash(i_pos); struct hlist_node *_p; struct msdos_inode_info *i; struct inode *inode = NULL; -- cgit v1.2.3 From 5e35dd4651002207948f10c576fc7d9bad448815 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:49 -0800 Subject: fat: Fix fat_ent_update_ptr() for FAT12 This fixes the missing update for bhs/nr_bhs in case the caller accessed from block boundary to first block of boundary. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/fatent.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c index 5b5f49061b7c..13513992da3c 100644 --- a/fs/fat/fatent.c +++ b/fs/fat/fatent.c @@ -317,10 +317,20 @@ static inline int fat_ent_update_ptr(struct super_block *sb, /* Is this fatent's blocks including this entry? */ if (!fatent->nr_bhs || bhs[0]->b_blocknr != blocknr) return 0; - /* Does this entry need the next block? */ - if (sbi->fat_bits == 12 && (offset + 1) >= sb->s_blocksize) { - if (fatent->nr_bhs != 2 || bhs[1]->b_blocknr != (blocknr + 1)) - return 0; + if (sbi->fat_bits == 12) { + if ((offset + 1) < sb->s_blocksize) { + /* This entry is on bhs[0]. */ + if (fatent->nr_bhs == 2) { + brelse(bhs[1]); + fatent->nr_bhs = 1; + } + } else { + /* This entry needs the next block. */ + if (fatent->nr_bhs != 2) + return 0; + if (bhs[1]->b_blocknr != (blocknr + 1)) + return 0; + } } ops->ent_set_ptr(fatent, offset); return 1; -- cgit v1.2.3 From a993b542bb4cd3e5a64863b7ef892bbebec2239b Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:50 -0800 Subject: fat: use fat_detach() in fat_clear_inode() Use fat_detach() instead of opencoding it. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/inode.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/fs/fat/inode.c b/fs/fat/inode.c index f58cd48d98b8..8e1b75c63c7f 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -429,13 +429,8 @@ static void fat_delete_inode(struct inode *inode) static void fat_clear_inode(struct inode *inode) { - struct super_block *sb = inode->i_sb; - struct msdos_sb_info *sbi = MSDOS_SB(sb); - - spin_lock(&sbi->inode_hash_lock); fat_cache_inval_inode(inode); - hlist_del_init(&MSDOS_I(inode)->i_fat_hash); - spin_unlock(&sbi->inode_hash_lock); + fat_detach(inode); } static void fat_write_super(struct super_block *sb) -- cgit v1.2.3 From 068f5ae05c51d2cee6b31cb3da06775dd83bd348 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:51 -0800 Subject: vfat: Fix vfat_find() error path in vfat_lookup() Current vfat_lookup() creates negetive dentry blindly if vfat_find() returned a error. It's wrong. If the error isn't -ENOENT, just return error. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/namei_vfat.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c index 1536bc3ca0f0..419deabfb9be 100644 --- a/fs/fat/namei_vfat.c +++ b/fs/fat/namei_vfat.c @@ -683,7 +683,7 @@ static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry, { struct super_block *sb = dir->i_sb; struct fat_slot_info sinfo; - struct inode *inode = NULL; + struct inode *inode; struct dentry *alias; int err, table; @@ -693,14 +693,18 @@ static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry, err = vfat_find(dir, &dentry->d_name, &sinfo); if (err) { - table++; + if (err == -ENOENT) { + table++; + inode = NULL; + goto out; + } goto error; } inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); brelse(sinfo.bh); if (IS_ERR(inode)) { - unlock_super(sb); - return ERR_CAST(inode); + err = PTR_ERR(inode); + goto error; } alias = d_find_alias(inode); if (alias) { @@ -713,7 +717,7 @@ static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry, } } -error: +out: unlock_super(sb); dentry->d_op = &vfat_dentry_ops[table]; dentry->d_time = dentry->d_parent->d_inode->i_version; @@ -723,6 +727,10 @@ error: dentry->d_time = dentry->d_parent->d_inode->i_version; } return dentry; + +error: + unlock_super(sb); + return ERR_PTR(err); } static int vfat_create(struct inode *dir, struct dentry *dentry, int mode, -- cgit v1.2.3 From 1b52467243c7167b3a267ddbcbb14d550f28eb4a Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:51 -0800 Subject: fat: Fix/Cleanup dcache handling for vfat - Add comments for handling dcache of vfat. - Separate case-sensitive case and case-insensitive to vfat_revalidate() and vfat_ci_revalidate(). vfat_revalidate() doesn't need to drop case-insensitive negative dentry on creation path. - Current code is missing to set ->d_revalidate to the negative dentry created by unlink/etc.. This sets ->d_revalidate always, and returns 1 for positive dentry. Now, we don't need to change ->d_op dynamically anymore, so this just uses sb->s_root->d_op to set ->d_op. - d_find_alias() may return DCACHE_DISCONNECTED dentry. It's not the interesting dentry there. This checks it. - Add missing LOOKUP_PARENT check. We don't need to drop the valid negative dentry for (LOOKUP_CREATE | LOOKUP_PARENT) lookup. - For consistent filename on creation path, this drops negative dentry if we can't see intent. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/namei_vfat.c | 124 +++++++++++++++++++++++++++++++++------------------- 1 file changed, 80 insertions(+), 44 deletions(-) diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c index 419deabfb9be..d585398f9f6b 100644 --- a/fs/fat/namei_vfat.c +++ b/fs/fat/namei_vfat.c @@ -24,27 +24,67 @@ #include #include "fat.h" -static int vfat_revalidate(struct dentry *dentry, struct nameidata *nd) +/* + * If new entry was created in the parent, it could create the 8.3 + * alias (the shortname of logname). So, the parent may have the + * negative-dentry which matches the created 8.3 alias. + * + * If it happened, the negative dentry isn't actually negative + * anymore. So, drop it. + */ +static int vfat_revalidate_shortname(struct dentry *dentry) { int ret = 1; - - if (!dentry->d_inode && - nd && !(nd->flags & LOOKUP_CONTINUE) && (nd->flags & LOOKUP_CREATE)) - /* - * negative dentry is dropped, in order to make sure - * to use the name which a user desires if this is - * create path. - */ + spin_lock(&dentry->d_lock); + if (dentry->d_time != dentry->d_parent->d_inode->i_version) ret = 0; - else { - spin_lock(&dentry->d_lock); - if (dentry->d_time != dentry->d_parent->d_inode->i_version) - ret = 0; - spin_unlock(&dentry->d_lock); - } + spin_unlock(&dentry->d_lock); return ret; } +static int vfat_revalidate(struct dentry *dentry, struct nameidata *nd) +{ + /* This is not negative dentry. Always valid. */ + if (dentry->d_inode) + return 1; + return vfat_revalidate_shortname(dentry); +} + +static int vfat_revalidate_ci(struct dentry *dentry, struct nameidata *nd) +{ + /* + * This is not negative dentry. Always valid. + * + * Note, rename() to existing directory entry will have ->d_inode, + * and will use existing name which isn't specified name by user. + * + * We may be able to drop this positive dentry here. But dropping + * positive dentry isn't good idea. So it's unsupported like + * rename("filename", "FILENAME") for now. + */ + if (dentry->d_inode) + return 1; + + /* + * This may be nfsd (or something), anyway, we can't see the + * intent of this. So, since this can be for creation, drop it. + */ + if (!nd) + return 0; + + /* + * Drop the negative dentry, in order to make sure to use the + * case sensitive name which is specified by user if this is + * for creation. + */ + if (!(nd->flags & (LOOKUP_CONTINUE | LOOKUP_PARENT))) { + if (nd->flags & LOOKUP_CREATE) + return 0; + } + + return vfat_revalidate_shortname(dentry); +} + /* returns the length of a struct qstr, ignoring trailing dots */ static unsigned int vfat_striptail_len(struct qstr *qstr) { @@ -126,25 +166,16 @@ static int vfat_cmp(struct dentry *dentry, struct qstr *a, struct qstr *b) return 1; } -static struct dentry_operations vfat_dentry_ops[4] = { - { - .d_hash = vfat_hashi, - .d_compare = vfat_cmpi, - }, - { - .d_revalidate = vfat_revalidate, - .d_hash = vfat_hashi, - .d_compare = vfat_cmpi, - }, - { - .d_hash = vfat_hash, - .d_compare = vfat_cmp, - }, - { - .d_revalidate = vfat_revalidate, - .d_hash = vfat_hash, - .d_compare = vfat_cmp, - } +static struct dentry_operations vfat_ci_dentry_ops = { + .d_revalidate = vfat_revalidate_ci, + .d_hash = vfat_hashi, + .d_compare = vfat_cmpi, +}; + +static struct dentry_operations vfat_dentry_ops = { + .d_revalidate = vfat_revalidate, + .d_hash = vfat_hash, + .d_compare = vfat_cmp, }; /* Characters that are undesirable in an MS-DOS file name */ @@ -685,29 +716,35 @@ static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry, struct fat_slot_info sinfo; struct inode *inode; struct dentry *alias; - int err, table; + int err; lock_super(sb); - table = (MSDOS_SB(sb)->options.name_check == 's') ? 2 : 0; - dentry->d_op = &vfat_dentry_ops[table]; err = vfat_find(dir, &dentry->d_name, &sinfo); if (err) { if (err == -ENOENT) { - table++; inode = NULL; goto out; } goto error; } + inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); brelse(sinfo.bh); if (IS_ERR(inode)) { err = PTR_ERR(inode); goto error; } + alias = d_find_alias(inode); - if (alias) { + if (alias && !(alias->d_flags & DCACHE_DISCONNECTED)) { + /* + * This inode has non DCACHE_DISCONNECTED dentry. This + * means, the user did ->lookup() by an another name + * (longname vs 8.3 alias of it) in past. + * + * Switch to new one for reason of locality if possible. + */ if (d_invalidate(alias) == 0) dput(alias); else { @@ -715,15 +752,14 @@ static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry, unlock_super(sb); return alias; } - } out: unlock_super(sb); - dentry->d_op = &vfat_dentry_ops[table]; + dentry->d_op = sb->s_root->d_op; dentry->d_time = dentry->d_parent->d_inode->i_version; dentry = d_splice_alias(inode, dentry); if (dentry) { - dentry->d_op = &vfat_dentry_ops[table]; + dentry->d_op = sb->s_root->d_op; dentry->d_time = dentry->d_parent->d_inode->i_version; } return dentry; @@ -1022,9 +1058,9 @@ static int vfat_fill_super(struct super_block *sb, void *data, int silent) return res; if (MSDOS_SB(sb)->options.name_check != 's') - sb->s_root->d_op = &vfat_dentry_ops[0]; + sb->s_root->d_op = &vfat_ci_dentry_ops; else - sb->s_root->d_op = &vfat_dentry_ops[2]; + sb->s_root->d_op = &vfat_dentry_ops; return 0; } -- cgit v1.2.3 From 1c13a243a461dd5b089d29e5d57f260c990e462c Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:52 -0800 Subject: fat: Kill d_invalidate() in vfat_lookup() d_invalidate() for positive dentry doesn't work in some cases (vfsmount, nfsd, and maybe others). shrink_dcache_parent() by d_invalidate() is pointless for vfat usage at all. So, this kills it, and intead of it uses d_move(). To save old behavior, this returns alias simply for directory (don't change pwd, etc..). the directory lookup shouldn't be important for performance. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/namei_vfat.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c index d585398f9f6b..bf326d4356a3 100644 --- a/fs/fat/namei_vfat.c +++ b/fs/fat/namei_vfat.c @@ -745,13 +745,12 @@ static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry, * * Switch to new one for reason of locality if possible. */ - if (d_invalidate(alias) == 0) - dput(alias); - else { - iput(inode); - unlock_super(sb); - return alias; - } + BUG_ON(d_unhashed(alias)); + if (!S_ISDIR(inode->i_mode)) + d_move(alias, dentry); + iput(inode); + unlock_super(sb); + return alias; } out: unlock_super(sb); -- cgit v1.2.3 From 45cfbe354785a5bc9a38354754d6f7322f598001 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:53 -0800 Subject: fat: Cleanup msdos_lookup() Use same style with vfat_lookup(). Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/namei_msdos.c | 38 +++++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 17 deletions(-) diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c index e92e8158ebaf..7ba03a4acbe0 100644 --- a/fs/fat/namei_msdos.c +++ b/fs/fat/namei_msdos.c @@ -203,33 +203,37 @@ static struct dentry *msdos_lookup(struct inode *dir, struct dentry *dentry, { struct super_block *sb = dir->i_sb; struct fat_slot_info sinfo; - struct inode *inode = NULL; - int res; - - dentry->d_op = &msdos_dentry_operations; + struct inode *inode; + int err; lock_super(sb); - res = msdos_find(dir, dentry->d_name.name, dentry->d_name.len, &sinfo); - if (res == -ENOENT) - goto add; - if (res < 0) - goto out; + + err = msdos_find(dir, dentry->d_name.name, dentry->d_name.len, &sinfo); + if (err) { + if (err == -ENOENT) { + inode = NULL; + goto out; + } + goto error; + } + inode = fat_build_inode(sb, sinfo.de, sinfo.i_pos); brelse(sinfo.bh); if (IS_ERR(inode)) { - res = PTR_ERR(inode); - goto out; + err = PTR_ERR(inode); + goto error; } -add: - res = 0; +out: + unlock_super(sb); + dentry->d_op = &msdos_dentry_operations; dentry = d_splice_alias(inode, dentry); if (dentry) dentry->d_op = &msdos_dentry_operations; -out: + return dentry; + +error: unlock_super(sb); - if (!res) - return dentry; - return ERR_PTR(res); + return ERR_PTR(err); } /***** Creates a directory entry (name is already formatted). */ -- cgit v1.2.3 From 9c0aa1b87bf541affef519eb4879ce7c5a5941ae Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:54 -0800 Subject: fat: Cleanup FAT attribute stuff This adds three helpers: fat_make_attrs() - makes FAT attributes from inode. fat_make_mode() - makes mode_t from FAT attributes. fat_save_attrs() - saves FAT attributes to inode. Then this replaces: MSDOS_MKMODE() by fat_make_mode(), fat_attr() by fat_make_attrs(), ->i_attrs = attr & ATTR_UNUSED by fat_save_attrs(). And for root inode, those is used with ATTR_DIR instead of bogus ATTR_NONE. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/fat.h | 20 +++++++++++++++++++- fs/fat/file.c | 32 ++++++++++++-------------------- fs/fat/inode.c | 19 +++++++++---------- include/linux/msdos_fs.h | 5 ----- 4 files changed, 40 insertions(+), 36 deletions(-) diff --git a/fs/fat/fat.h b/fs/fat/fat.h index 2b8e94c3eef4..3b4753a024e3 100644 --- a/fs/fat/fat.h +++ b/fs/fat/fat.h @@ -117,14 +117,32 @@ static inline struct msdos_inode_info *MSDOS_I(struct inode *inode) return container_of(inode, struct msdos_inode_info, vfs_inode); } +/* Convert attribute bits and a mask to the UNIX mode. */ +static inline mode_t fat_make_mode(struct msdos_sb_info *sbi, + u8 attrs, mode_t mode) +{ + if (attrs & ATTR_RO) + mode &= ~S_IWUGO; + + if (attrs & ATTR_DIR) + return (mode & ~sbi->options.fs_dmask) | S_IFDIR; + else + return (mode & ~sbi->options.fs_fmask) | S_IFREG; +} + /* Return the FAT attribute byte for this inode */ -static inline u8 fat_attr(struct inode *inode) +static inline u8 fat_make_attrs(struct inode *inode) { return ((inode->i_mode & S_IWUGO) ? ATTR_NONE : ATTR_RO) | (S_ISDIR(inode->i_mode) ? ATTR_DIR : ATTR_NONE) | MSDOS_I(inode)->i_attrs; } +static inline void fat_save_attrs(struct inode *inode, u8 attrs) +{ + MSDOS_I(inode)->i_attrs = attrs & ATTR_UNUSED; +} + static inline unsigned char fat_checksum(const __u8 *name) { unsigned char s = name[0]; diff --git a/fs/fat/file.c b/fs/fat/file.c index b21973f266a1..f5a7e907a8fa 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -27,13 +27,7 @@ int fat_generic_ioctl(struct inode *inode, struct file *filp, switch (cmd) { case FAT_IOCTL_GET_ATTRIBUTES: { - u32 attr; - - if (inode->i_ino == MSDOS_ROOT_INO) - attr = ATTR_DIR; - else - attr = fat_attr(inode); - + u32 attr = fat_make_attrs(inode); return put_user(attr, user_attr); } case FAT_IOCTL_SET_ATTRIBUTES: @@ -62,20 +56,16 @@ int fat_generic_ioctl(struct inode *inode, struct file *filp, /* Merge in ATTR_VOLUME and ATTR_DIR */ attr |= (MSDOS_I(inode)->i_attrs & ATTR_VOLUME) | (is_dir ? ATTR_DIR : 0); - oldattr = fat_attr(inode); + oldattr = fat_make_attrs(inode); /* Equivalent to a chmod() */ ia.ia_valid = ATTR_MODE | ATTR_CTIME; ia.ia_ctime = current_fs_time(inode->i_sb); - if (is_dir) { - ia.ia_mode = MSDOS_MKMODE(attr, - S_IRWXUGO & ~sbi->options.fs_dmask) - | S_IFDIR; - } else { - ia.ia_mode = MSDOS_MKMODE(attr, - (S_IRUGO | S_IWUGO | (inode->i_mode & S_IXUGO)) - & ~sbi->options.fs_fmask) - | S_IFREG; + if (is_dir) + ia.ia_mode = fat_make_mode(sbi, attr, S_IRWXUGO); + else { + ia.ia_mode = fat_make_mode(sbi, attr, + S_IRUGO | S_IWUGO | (inode->i_mode & S_IXUGO)); } /* The root directory has no attributes */ @@ -115,7 +105,7 @@ int fat_generic_ioctl(struct inode *inode, struct file *filp, inode->i_flags &= S_IMMUTABLE; } - MSDOS_I(inode)->i_attrs = attr & ATTR_UNUSED; + fat_save_attrs(inode, attr); mark_inode_dirty(inode); up: mnt_drop_write(filp->f_path.mnt); @@ -274,7 +264,7 @@ static int fat_sanitize_mode(const struct msdos_sb_info *sbi, /* * Note, the basic check is already done by a caller of - * (attr->ia_mode & ~MSDOS_VALID_MODE) + * (attr->ia_mode & ~FAT_VALID_MODE) */ if (S_ISREG(inode->i_mode)) @@ -314,6 +304,8 @@ static int fat_allow_set_time(struct msdos_sb_info *sbi, struct inode *inode) } #define TIMES_SET_FLAGS (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET) +/* valid file mode bits */ +#define FAT_VALID_MODE (S_IFREG | S_IFDIR | S_IRWXUGO) int fat_setattr(struct dentry *dentry, struct iattr *attr) { @@ -356,7 +348,7 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) ((attr->ia_valid & ATTR_GID) && (attr->ia_gid != sbi->options.fs_gid)) || ((attr->ia_valid & ATTR_MODE) && - (attr->ia_mode & ~MSDOS_VALID_MODE))) + (attr->ia_mode & ~FAT_VALID_MODE))) error = -EPERM; if (error) { diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 8e1b75c63c7f..7aaa21cf019a 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -337,8 +337,7 @@ static int fat_fill_inode(struct inode *inode, struct msdos_dir_entry *de) if ((de->attr & ATTR_DIR) && !IS_FREE(de->name)) { inode->i_generation &= ~1; - inode->i_mode = MSDOS_MKMODE(de->attr, - S_IRWXUGO & ~sbi->options.fs_dmask) | S_IFDIR; + inode->i_mode = fat_make_mode(sbi, de->attr, S_IRWXUGO); inode->i_op = sbi->dir_ops; inode->i_fop = &fat_dir_operations; @@ -355,10 +354,9 @@ static int fat_fill_inode(struct inode *inode, struct msdos_dir_entry *de) inode->i_nlink = fat_subdirs(inode); } else { /* not a directory */ inode->i_generation |= 1; - inode->i_mode = MSDOS_MKMODE(de->attr, - ((sbi->options.showexec && !is_exec(de->name + 8)) - ? S_IRUGO|S_IWUGO : S_IRWXUGO) - & ~sbi->options.fs_fmask) | S_IFREG; + inode->i_mode = fat_make_mode(sbi, de->attr, + ((sbi->options.showexec && !is_exec(de->name + 8)) + ? S_IRUGO|S_IWUGO : S_IRWXUGO)); MSDOS_I(inode)->i_start = le16_to_cpu(de->start); if (sbi->fat_bits == 32) MSDOS_I(inode)->i_start |= (le16_to_cpu(de->starthi) << 16); @@ -374,7 +372,8 @@ static int fat_fill_inode(struct inode *inode, struct msdos_dir_entry *de) if (sbi->options.sys_immutable) inode->i_flags |= S_IMMUTABLE; } - MSDOS_I(inode)->i_attrs = de->attr & ATTR_UNUSED; + fat_save_attrs(inode, de->attr); + inode->i_blocks = ((inode->i_size + (sbi->cluster_size - 1)) & ~((loff_t)sbi->cluster_size - 1)) >> 9; @@ -569,7 +568,7 @@ retry: raw_entry->size = 0; else raw_entry->size = cpu_to_le32(inode->i_size); - raw_entry->attr = fat_attr(inode); + raw_entry->attr = fat_make_attrs(inode); raw_entry->start = cpu_to_le16(MSDOS_I(inode)->i_logstart); raw_entry->starthi = cpu_to_le16(MSDOS_I(inode)->i_logstart >> 16); fat_time_unix2fat(sbi, &inode->i_mtime, &raw_entry->time, @@ -1105,7 +1104,7 @@ static int fat_read_root(struct inode *inode) inode->i_gid = sbi->options.fs_gid; inode->i_version++; inode->i_generation = 0; - inode->i_mode = (S_IRWXUGO & ~sbi->options.fs_dmask) | S_IFDIR; + inode->i_mode = fat_make_mode(sbi, ATTR_DIR, S_IRWXUGO); inode->i_op = sbi->dir_ops; inode->i_fop = &fat_dir_operations; if (sbi->fat_bits == 32) { @@ -1122,7 +1121,7 @@ static int fat_read_root(struct inode *inode) MSDOS_I(inode)->i_logstart = 0; MSDOS_I(inode)->mmu_private = inode->i_size; - MSDOS_I(inode)->i_attrs = ATTR_NONE; + fat_save_attrs(inode, ATTR_DIR); inode->i_mtime.tv_sec = inode->i_atime.tv_sec = inode->i_ctime.tv_sec = 0; inode->i_mtime.tv_nsec = inode->i_atime.tv_nsec = inode->i_ctime.tv_nsec = 0; inode->i_nlink = fat_subdirs(inode)+2; diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h index 0982fb47a90d..e0a9b207920d 100644 --- a/include/linux/msdos_fs.h +++ b/include/linux/msdos_fs.h @@ -46,11 +46,6 @@ #define DELETED_FLAG 0xe5 /* marks file as deleted when in name[0] */ #define IS_FREE(n) (!*(n) || *(n) == DELETED_FLAG) -/* valid file mode bits */ -#define MSDOS_VALID_MODE (S_IFREG | S_IFDIR | S_IRWXU | S_IRWXG | S_IRWXO) -/* Convert attribute bits and a mask to the UNIX mode. */ -#define MSDOS_MKMODE(a, m) (m & (a & ATTR_RO ? S_IRUGO|S_IXUGO : S_IRWXUGO)) - #define MSDOS_NAME 11 /* maximum name length */ #define MSDOS_LONGNAME 256 /* maximum name length */ #define MSDOS_SLOTS 21 /* max # of slots for short and long names */ -- cgit v1.2.3 From 9183482f5d4a2de00f66641b974e7f351d41b675 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:54 -0800 Subject: fat: Fix ATTR_RO in the case of (~umask & S_WUGO) == 0 If inode->i_mode doesn't have S_WUGO, current code assumes it means ATTR_RO. However, if (~[ufd]mask & S_WUGO) == 0, inode->i_mode can't hold S_WUGO. Therefore the updated directory entry will always have ATTR_RO. This adds fat_mode_can_hold_ro() to check it. And if inode->i_mode can't hold, uses -i_attrs to hold ATTR_RO instead. With this, we don't set ATTR_RO unless users change it via ioctl() if (~[ufd]mask & S_WUGO) == 0. And on FAT_IOCTL_GET_ATTRIBUTES path, this adds ->i_mutex to it for not returning the partially updated attributes by FAT_IOCTL_SET_ATTRIBUTES to userland. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/fat.h | 33 +++++++++++++++++++++++++++++---- fs/fat/file.c | 7 ++++++- 2 files changed, 35 insertions(+), 5 deletions(-) diff --git a/fs/fat/fat.h b/fs/fat/fat.h index 3b4753a024e3..313b645b8126 100644 --- a/fs/fat/fat.h +++ b/fs/fat/fat.h @@ -117,6 +117,25 @@ static inline struct msdos_inode_info *MSDOS_I(struct inode *inode) return container_of(inode, struct msdos_inode_info, vfs_inode); } +/* + * If ->i_mode can't hold S_IWUGO (i.e. ATTR_RO), we use ->i_attrs to + * save ATTR_RO instead of ->i_mode. + */ +static inline int fat_mode_can_hold_ro(struct inode *inode) +{ + struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb); + mode_t mask; + + if (S_ISDIR(inode->i_mode)) + mask = ~sbi->options.fs_dmask; + else + mask = ~sbi->options.fs_fmask; + + if (!(mask & S_IWUGO)) + return 0; + return 1; +} + /* Convert attribute bits and a mask to the UNIX mode. */ static inline mode_t fat_make_mode(struct msdos_sb_info *sbi, u8 attrs, mode_t mode) @@ -133,14 +152,20 @@ static inline mode_t fat_make_mode(struct msdos_sb_info *sbi, /* Return the FAT attribute byte for this inode */ static inline u8 fat_make_attrs(struct inode *inode) { - return ((inode->i_mode & S_IWUGO) ? ATTR_NONE : ATTR_RO) | - (S_ISDIR(inode->i_mode) ? ATTR_DIR : ATTR_NONE) | - MSDOS_I(inode)->i_attrs; + u8 attrs = MSDOS_I(inode)->i_attrs; + if (S_ISDIR(inode->i_mode)) + attrs |= ATTR_DIR; + if (fat_mode_can_hold_ro(inode) && !(inode->i_mode & S_IWUGO)) + attrs |= ATTR_RO; + return attrs; } static inline void fat_save_attrs(struct inode *inode, u8 attrs) { - MSDOS_I(inode)->i_attrs = attrs & ATTR_UNUSED; + if (fat_mode_can_hold_ro(inode)) + MSDOS_I(inode)->i_attrs = attrs & ATTR_UNUSED; + else + MSDOS_I(inode)->i_attrs = attrs & (ATTR_UNUSED | ATTR_RO); } static inline unsigned char fat_checksum(const __u8 *name) diff --git a/fs/fat/file.c b/fs/fat/file.c index f5a7e907a8fa..81b15c623803 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -27,7 +27,12 @@ int fat_generic_ioctl(struct inode *inode, struct file *filp, switch (cmd) { case FAT_IOCTL_GET_ATTRIBUTES: { - u32 attr = fat_make_attrs(inode); + u32 attr; + + mutex_lock(&inode->i_mutex); + attr = fat_make_attrs(inode); + mutex_unlock(&inode->i_mutex); + return put_user(attr, user_attr); } case FAT_IOCTL_SET_ATTRIBUTES: -- cgit v1.2.3 From dfc209c0064efef5590f608056a48b61a5cac09c Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:55 -0800 Subject: fat: Fix ATTR_RO for directory FAT has the ATTR_RO (read-only) attribute. But on Windows, the ATTR_RO of the directory will be just ignored actually, and is used by only applications as flag. E.g. it's setted for the customized folder by Explorer. http://msdn2.microsoft.com/en-us/library/aa969337.aspx This adds "rodir" option. If user specified it, ATTR_RO is used as read-only flag even if it's the directory. Otherwise, inode->i_mode is not used to hold ATTR_RO (i.e. fat_mode_can_save_ro() returns 0). Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/vfat.txt | 8 ++++++++ fs/fat/fat.h | 14 ++++++++++---- fs/fat/file.c | 16 ++++++++++++---- fs/fat/inode.c | 17 +++++++++++++---- 4 files changed, 43 insertions(+), 12 deletions(-) diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index dc9dc73d7d38..3a5ddc96901a 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -124,6 +124,14 @@ sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as flush -- If set, the filesystem will try to flush to disk more early than normal. Not set by default. +rodir -- FAT has the ATTR_RO (read-only) attribute. But on Windows, + the ATTR_RO of the directory will be just ignored actually, + and is used by only applications as flag. E.g. it's setted + for the customized folder. + + If you want to use ATTR_RO as read-only flag even for + the directory, set this option. + : 0,1,yes,no,true,false TODO diff --git a/fs/fat/fat.h b/fs/fat/fat.h index 313b645b8126..e9dce5d8e7a7 100644 --- a/fs/fat/fat.h +++ b/fs/fat/fat.h @@ -38,7 +38,8 @@ struct fat_mount_options { flush:1, /* write things quickly */ nocase:1, /* Does this need case conversion? 0=need case conversion*/ usefree:1, /* Use free_clusters for FAT32 */ - tz_utc:1; /* Filesystem timestamps are in UTC */ + tz_utc:1, /* Filesystem timestamps are in UTC */ + rodir:1; /* allow ATTR_RO for directory */ }; #define FAT_HASH_BITS 8 @@ -120,15 +121,20 @@ static inline struct msdos_inode_info *MSDOS_I(struct inode *inode) /* * If ->i_mode can't hold S_IWUGO (i.e. ATTR_RO), we use ->i_attrs to * save ATTR_RO instead of ->i_mode. + * + * If it's directory and !sbi->options.rodir, ATTR_RO isn't read-only + * bit, it's just used as flag for app. */ static inline int fat_mode_can_hold_ro(struct inode *inode) { struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb); mode_t mask; - if (S_ISDIR(inode->i_mode)) + if (S_ISDIR(inode->i_mode)) { + if (!sbi->options.rodir) + return 0; mask = ~sbi->options.fs_dmask; - else + } else mask = ~sbi->options.fs_fmask; if (!(mask & S_IWUGO)) @@ -140,7 +146,7 @@ static inline int fat_mode_can_hold_ro(struct inode *inode) static inline mode_t fat_make_mode(struct msdos_sb_info *sbi, u8 attrs, mode_t mode) { - if (attrs & ATTR_RO) + if (attrs & ATTR_RO && !((attrs & ATTR_DIR) && !sbi->options.rodir)) mode &= ~S_IWUGO; if (attrs & ATTR_DIR) diff --git a/fs/fat/file.c b/fs/fat/file.c index 81b15c623803..f06a4e525ece 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -282,11 +282,18 @@ static int fat_sanitize_mode(const struct msdos_sb_info *sbi, /* * Of the r and x bits, all (subject to umask) must be present. Of the * w bits, either all (subject to umask) or none must be present. + * + * If fat_mode_can_hold_ro(inode) is false, can't change w bits. */ if ((perm & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO))) return -EPERM; - if ((perm & S_IWUGO) && ((perm & S_IWUGO) != (S_IWUGO & ~mask))) - return -EPERM; + if (fat_mode_can_hold_ro(inode)) { + if ((perm & S_IWUGO) && ((perm & S_IWUGO) != (S_IWUGO & ~mask))) + return -EPERM; + } else { + if ((perm & S_IWUGO) != (S_IWUGO & ~mask)) + return -EPERM; + } *mode_ptr &= S_IFMT | perm; @@ -316,8 +323,8 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) { struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb); struct inode *inode = dentry->d_inode; - int error = 0; unsigned int ia_valid; + int error; /* * Expand the file. Since inode_setattr() updates ->i_size @@ -371,7 +378,8 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) attr->ia_valid &= ~ATTR_MODE; } - error = inode_setattr(inode, attr); + if (attr->ia_valid) + error = inode_setattr(inode, attr); out: return error; } diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 7aaa21cf019a..0da04e6d1e34 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -797,8 +797,10 @@ static int fat_show_options(struct seq_file *m, struct vfsmount *mnt) seq_puts(m, ",uni_xlate"); if (!opts->numtail) seq_puts(m, ",nonumtail"); + if (opts->rodir) + seq_puts(m, ",rodir"); } - if (sbi->options.flush) + if (opts->flush) seq_puts(m, ",flush"); if (opts->tz_utc) seq_puts(m, ",tz=UTC"); @@ -814,7 +816,7 @@ enum { Opt_charset, Opt_shortname_lower, Opt_shortname_win95, Opt_shortname_winnt, Opt_shortname_mixed, Opt_utf8_no, Opt_utf8_yes, Opt_uni_xl_no, Opt_uni_xl_yes, Opt_nonumtail_no, Opt_nonumtail_yes, - Opt_obsolate, Opt_flush, Opt_tz_utc, Opt_err, + Opt_obsolate, Opt_flush, Opt_tz_utc, Opt_rodir, Opt_err, }; static const match_table_t fat_tokens = { @@ -886,6 +888,7 @@ static const match_table_t vfat_tokens = { {Opt_nonumtail_yes, "nonumtail=yes"}, {Opt_nonumtail_yes, "nonumtail=true"}, {Opt_nonumtail_yes, "nonumtail"}, + {Opt_rodir, "rodir"}, {Opt_err, NULL} }; @@ -905,10 +908,13 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug, opts->allow_utime = -1; opts->codepage = fat_default_codepage; opts->iocharset = fat_default_iocharset; - if (is_vfat) + if (is_vfat) { opts->shortname = VFAT_SFN_DISPLAY_LOWER|VFAT_SFN_CREATE_WIN95; - else + opts->rodir = 0; + } else { opts->shortname = 0; + opts->rodir = 1; + } opts->name_check = 'n'; opts->quiet = opts->showexec = opts->sys_immutable = opts->dotsOK = 0; opts->utf8 = opts->unicode_xlate = 0; @@ -1059,6 +1065,9 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug, case Opt_nonumtail_yes: /* empty or 1 or yes or true */ opts->numtail = 0; /* negated option */ break; + case Opt_rodir: + opts->rodir = 1; + break; /* obsolete mount options */ case Opt_obsolate: -- cgit v1.2.3 From fa93ca18a8b0da4e26bd9491ad144cd14d22f8ec Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:56 -0800 Subject: fat: Fix _fat_bmap() race fat_get_cluster() assumes the requested blocknr isn't truncated during read. _fat_bmap() doesn't follow this rule. This protects it by ->i_mutex. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/inode.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 0da04e6d1e34..be88208b83a6 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -199,7 +199,14 @@ static ssize_t fat_direct_IO(int rw, struct kiocb *iocb, static sector_t _fat_bmap(struct address_space *mapping, sector_t block) { - return generic_block_bmap(mapping, block, fat_get_block); + sector_t blocknr; + + /* fat_get_cluster() assumes the requested blocknr isn't truncated. */ + mutex_lock(&mapping->host->i_mutex); + blocknr = generic_block_bmap(mapping, block, fat_get_block); + mutex_unlock(&mapping->host->i_mutex); + + return blocknr; } static const struct address_space_operations fat_aops = { -- cgit v1.2.3 From 0e75f5da06c05425f4b375eb981c4489fb2d9787 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:56 -0800 Subject: fat: Add printf attribute to fat_fs_panic() Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/fat.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/fat/fat.h b/fs/fat/fat.h index e9dce5d8e7a7..a69f7f9757c0 100644 --- a/fs/fat/fat.h +++ b/fs/fat/fat.h @@ -308,7 +308,8 @@ extern int fat_fill_super(struct super_block *sb, void *data, int silent, extern int fat_flush_inodes(struct super_block *sb, struct inode *i1, struct inode *i2); /* fat/misc.c */ -extern void fat_fs_panic(struct super_block *s, const char *fmt, ...); +extern void fat_fs_panic(struct super_block *s, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))) __cold; extern void fat_clusters_flush(struct super_block *sb); extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster); extern void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts, -- cgit v1.2.3 From 2bdf67eb1631f30e2f3f5d49e4007c76e88877a8 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:57 -0800 Subject: fat: mmu_private race fix mmu_private is 64bits value, hence it's not atomic to update. So, the access rule for mmu_private is we must hold ->i_mutex. But, fat_get_block() path doesn't follow the rule on non-allocation path. This fixes by using i_size instead if non-allocation path. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/cache.c | 23 ++++++++++++++++++----- fs/fat/dir.c | 2 +- fs/fat/fat.h | 6 ++++-- fs/fat/inode.c | 4 ++-- 4 files changed, 25 insertions(+), 10 deletions(-) diff --git a/fs/fat/cache.c b/fs/fat/cache.c index 589edde9053c..b42602298087 100644 --- a/fs/fat/cache.c +++ b/fs/fat/cache.c @@ -293,10 +293,12 @@ static int fat_bmap_cluster(struct inode *inode, int cluster) } int fat_bmap(struct inode *inode, sector_t sector, sector_t *phys, - unsigned long *mapped_blocks) + unsigned long *mapped_blocks, int create) { struct super_block *sb = inode->i_sb; struct msdos_sb_info *sbi = MSDOS_SB(sb); + const unsigned long blocksize = sb->s_blocksize; + const unsigned char blocksize_bits = sb->s_blocksize_bits; sector_t last_block; int cluster, offset; @@ -309,10 +311,21 @@ int fat_bmap(struct inode *inode, sector_t sector, sector_t *phys, } return 0; } - last_block = (MSDOS_I(inode)->mmu_private + (sb->s_blocksize - 1)) - >> sb->s_blocksize_bits; - if (sector >= last_block) - return 0; + + last_block = (i_size_read(inode) + (blocksize - 1)) >> blocksize_bits; + if (sector >= last_block) { + if (!create) + return 0; + + /* + * ->mmu_private can access on only allocation path. + * (caller must hold ->i_mutex) + */ + last_block = (MSDOS_I(inode)->mmu_private + (blocksize - 1)) + >> blocksize_bits; + if (sector >= last_block) + return 0; + } cluster = sector >> (sbi->cluster_bits - sb->s_blocksize_bits); offset = sector & (sbi->sec_per_clus - 1); diff --git a/fs/fat/dir.c b/fs/fat/dir.c index 140fc39e2307..2ecaa17acdb5 100644 --- a/fs/fat/dir.c +++ b/fs/fat/dir.c @@ -77,7 +77,7 @@ next: *bh = NULL; iblock = *pos >> sb->s_blocksize_bits; - err = fat_bmap(dir, iblock, &phys, &mapped_blocks); + err = fat_bmap(dir, iblock, &phys, &mapped_blocks, 0); if (err || !phys) return -1; /* beyond EOF or error */ diff --git a/fs/fat/fat.h b/fs/fat/fat.h index a69f7f9757c0..4efc5038ed29 100644 --- a/fs/fat/fat.h +++ b/fs/fat/fat.h @@ -91,7 +91,9 @@ struct msdos_inode_info { /* for avoiding the race between fat_free() and fat_get_cluster() */ unsigned int cache_valid_id; - loff_t mmu_private; + /* NOTE: mmu_private is 64bits, so must hold ->i_mutex to access */ + loff_t mmu_private; /* physically allocated size */ + int i_start; /* first cluster or 0 */ int i_logstart; /* logical first cluster */ int i_attrs; /* unused attribute bits */ @@ -222,7 +224,7 @@ extern void fat_cache_inval_inode(struct inode *inode); extern int fat_get_cluster(struct inode *inode, int cluster, int *fclus, int *dclus); extern int fat_bmap(struct inode *inode, sector_t sector, sector_t *phys, - unsigned long *mapped_blocks); + unsigned long *mapped_blocks, int create); /* fat/dir.c */ extern const struct file_operations fat_dir_operations; diff --git a/fs/fat/inode.c b/fs/fat/inode.c index be88208b83a6..9e37ad93c730 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -64,7 +64,7 @@ static inline int __fat_get_block(struct inode *inode, sector_t iblock, sector_t phys; int err, offset; - err = fat_bmap(inode, iblock, &phys, &mapped_blocks); + err = fat_bmap(inode, iblock, &phys, &mapped_blocks, create); if (err) return err; if (phys) { @@ -94,7 +94,7 @@ static inline int __fat_get_block(struct inode *inode, sector_t iblock, *max_blocks = min(mapped_blocks, *max_blocks); MSDOS_I(inode)->mmu_private += *max_blocks << sb->s_blocksize_bits; - err = fat_bmap(inode, iblock, &phys, &mapped_blocks); + err = fat_bmap(inode, iblock, &phys, &mapped_blocks, create); if (err) return err; -- cgit v1.2.3 From 9ca59f4c3d28df14a1545a1e2832f34a0a50e3ed Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:57 -0800 Subject: fat: ->i_pos race fix i_pos is 64bits value, hence it's not atomic to update. Important place is fat_write_inode() only, other places without lock are just for printk(). This adds lock for "BITS_PER_LONG == 32" kernel. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/inode.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 9e37ad93c730..bdd8fb7be2ca 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -542,6 +542,20 @@ static int fat_statfs(struct dentry *dentry, struct kstatfs *buf) return 0; } +static inline loff_t fat_i_pos_read(struct msdos_sb_info *sbi, + struct inode *inode) +{ + loff_t i_pos; +#if BITS_PER_LONG == 32 + spin_lock(&sbi->inode_hash_lock); +#endif + i_pos = MSDOS_I(inode)->i_pos; +#if BITS_PER_LONG == 32 + spin_unlock(&sbi->inode_hash_lock); +#endif + return i_pos; +} + static int fat_write_inode(struct inode *inode, int wait) { struct super_block *sb = inode->i_sb; @@ -551,9 +565,12 @@ static int fat_write_inode(struct inode *inode, int wait) loff_t i_pos; int err; + if (inode->i_ino == MSDOS_ROOT_INO) + return 0; + retry: - i_pos = MSDOS_I(inode)->i_pos; - if (inode->i_ino == MSDOS_ROOT_INO || !i_pos) + i_pos = fat_i_pos_read(sbi, inode); + if (!i_pos) return 0; bh = sb_bread(sb, i_pos >> sbi->dir_per_block_bits); -- cgit v1.2.3 From c3302931db090d87e9015c3a7ce5c97a7dd90f78 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 6 Nov 2008 12:53:58 -0800 Subject: fat: i_blocks warning fix blkcnt_t type depends on CONFIG_LSF. Use unsigned long long always for printk(). But lazy to type it, so add "llu" and use it. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/dir.c | 2 +- fs/fat/fat.h | 3 +++ fs/fat/fatent.c | 5 ++--- fs/fat/misc.c | 5 +++-- 4 files changed, 9 insertions(+), 6 deletions(-) diff --git a/fs/fat/dir.c b/fs/fat/dir.c index 2ecaa17acdb5..67e058357098 100644 --- a/fs/fat/dir.c +++ b/fs/fat/dir.c @@ -86,7 +86,7 @@ next: *bh = sb_bread(sb, phys); if (*bh == NULL) { printk(KERN_ERR "FAT: Directory bread(block %llu) failed\n", - (unsigned long long)phys); + (llu)phys); /* skip this block */ *pos = (iblock + 1) << sb->s_blocksize_bits; goto next; diff --git a/fs/fat/fat.h b/fs/fat/fat.h index 4efc5038ed29..ea440d65819c 100644 --- a/fs/fat/fat.h +++ b/fs/fat/fat.h @@ -323,4 +323,7 @@ extern int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs); int fat_cache_init(void); void fat_cache_destroy(void); +/* helper for printk */ +typedef unsigned long long llu; + #endif /* !_FAT_H */ diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c index 13513992da3c..da6eea47872f 100644 --- a/fs/fat/fatent.c +++ b/fs/fat/fatent.c @@ -93,8 +93,7 @@ static int fat12_ent_bread(struct super_block *sb, struct fat_entry *fatent, err_brelse: brelse(bhs[0]); err: - printk(KERN_ERR "FAT: FAT read failed (blocknr %llu)\n", - (unsigned long long)blocknr); + printk(KERN_ERR "FAT: FAT read failed (blocknr %llu)\n", (llu)blocknr); return -EIO; } @@ -107,7 +106,7 @@ static int fat_ent_bread(struct super_block *sb, struct fat_entry *fatent, fatent->bhs[0] = sb_bread(sb, blocknr); if (!fatent->bhs[0]) { printk(KERN_ERR "FAT: FAT read failed (blocknr %llu)\n", - (unsigned long long)blocknr); + (llu)blocknr); return -EIO; } fatent->nr_bhs = 1; diff --git a/fs/fat/misc.c b/fs/fat/misc.c index a191e79e66a9..ac39ebcc1496 100644 --- a/fs/fat/misc.c +++ b/fs/fat/misc.c @@ -124,8 +124,9 @@ int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster) mark_inode_dirty(inode); } if (new_fclus != (inode->i_blocks >> (sbi->cluster_bits - 9))) { - fat_fs_panic(sb, "clusters badly computed (%d != %lu)", - new_fclus, inode->i_blocks >> (sbi->cluster_bits - 9)); + fat_fs_panic(sb, "clusters badly computed (%d != %llu)", + new_fclus, + (llu)(inode->i_blocks >> (sbi->cluster_bits - 9))); fat_cache_inval_inode(inode); } inode->i_blocks += nr_cluster << (sbi->cluster_bits - 9); -- cgit v1.2.3 From 7597bc94d6f3bdccb086ac7f2ad91292fdaee2a4 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 5 Nov 2008 17:38:47 +0000 Subject: Fix accidental implicit cast in HR-timer conversion Fix the hrtimer_add_expires_ns() function. It should take a 'u64 ns' argument, but rather takes an 'unsigned long ns' argument - which might only be 32-bits. On FRV, this results in the kernel locking up because hrtimer_forward() passes the result of a 64-bit multiplication to this function, for which the compiler discards the top 32-bits - something that didn't happen when ktime_add_ns() was called directly. Signed-off-by: David Howells Acked-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- include/linux/hrtimer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 2b3645b1acf4..07e510a3b00a 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -239,7 +239,7 @@ static inline void hrtimer_add_expires(struct hrtimer *timer, ktime_t time) timer->_softexpires = ktime_add_safe(timer->_softexpires, time); } -static inline void hrtimer_add_expires_ns(struct hrtimer *timer, unsigned long ns) +static inline void hrtimer_add_expires_ns(struct hrtimer *timer, u64 ns) { timer->_expires = ktime_add_ns(timer->_expires, ns); timer->_softexpires = ktime_add_ns(timer->_softexpires, ns); -- cgit v1.2.3 From 3b53fbf4314594fa04544b02b2fc6e607912da18 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 6 Nov 2008 15:45:32 -0800 Subject: net: Fix recursive descent in __scm_destroy(). __scm_destroy() walks the list of file descriptors in the scm_fp_list pointed to by the scm_cookie argument. Those, in turn, can close sockets and invoke __scm_destroy() again. There is nothing which limits how deeply this can occur. The idea for how to fix this is from Linus. Basically, we do all of the fput()s at the top level by collecting all of the scm_fp_list objects hit by an fput(). Inside of the initial __scm_destroy() we keep running the list until it is empty. Signed-off-by: David S. Miller --- include/linux/sched.h | 2 ++ include/net/scm.h | 5 +++-- net/core/scm.c | 24 +++++++++++++++++++++--- 3 files changed, 26 insertions(+), 5 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index b483f39a7112..295b7c756ca6 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1349,6 +1349,8 @@ struct task_struct { */ unsigned long timer_slack_ns; unsigned long default_timer_slack_ns; + + struct list_head *scm_work_list; }; /* diff --git a/include/net/scm.h b/include/net/scm.h index 06df126103ca..33e9986beb86 100644 --- a/include/net/scm.h +++ b/include/net/scm.h @@ -14,8 +14,9 @@ struct scm_fp_list { - int count; - struct file *fp[SCM_MAX_FD]; + struct list_head list; + int count; + struct file *fp[SCM_MAX_FD]; }; struct scm_cookie diff --git a/net/core/scm.c b/net/core/scm.c index 10f5c65f6a47..ab242cc1acca 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -75,6 +75,7 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp) if (!fpl) return -ENOMEM; *fplp = fpl; + INIT_LIST_HEAD(&fpl->list); fpl->count = 0; } fpp = &fpl->fp[fpl->count]; @@ -106,9 +107,25 @@ void __scm_destroy(struct scm_cookie *scm) if (fpl) { scm->fp = NULL; - for (i=fpl->count-1; i>=0; i--) - fput(fpl->fp[i]); - kfree(fpl); + if (current->scm_work_list) { + list_add_tail(&fpl->list, current->scm_work_list); + } else { + LIST_HEAD(work_list); + + current->scm_work_list = &work_list; + + list_add(&fpl->list, &work_list); + while (!list_empty(&work_list)) { + fpl = list_first_entry(&work_list, struct scm_fp_list, list); + + list_del(&fpl->list); + for (i=fpl->count-1; i>=0; i--) + fput(fpl->fp[i]); + kfree(fpl); + } + + current->scm_work_list = NULL; + } } } @@ -284,6 +301,7 @@ struct scm_fp_list *scm_fp_dup(struct scm_fp_list *fpl) new_fpl = kmalloc(sizeof(*fpl), GFP_KERNEL); if (new_fpl) { + INIT_LIST_HEAD(&new_fpl->list); for (i=fpl->count-1; i>=0; i--) get_file(fpl->fp[i]); memcpy(new_fpl, fpl, sizeof(*fpl)); -- cgit v1.2.3 From fcef7836a31c6432b41a38867d413ed3d6aa8261 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 6 Nov 2008 12:05:21 -0800 Subject: alsa: fix snd_BUG_on() and friends sound/pci/pcxhr/pcxhr_core.c: In function 'pcxhr_set_pipe_cmd_params': sound/pci/pcxhr/pcxhr_core.c:700: warning: statement with no effect sound/pci/pcxhr/pcxhr_core.c:706: warning: statement with no effect sound/pci/pcxhr/pcxhr_core.c:710: warning: statement with no effect Due to try to fix this, and be more conventional about the empty stubs. Signed-off-by: Andrew Morton Signed-off-by: Takashi Iwai --- include/sound/core.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/include/sound/core.h b/include/sound/core.h index e5eec5f73502..7e5589472681 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -388,9 +388,13 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) #else /* !CONFIG_SND_DEBUG */ -#define snd_printd(fmt, args...) /* nothing */ -#define snd_BUG() /* nothing */ -#define snd_BUG_ON(cond) ({/*(void)(cond);*/ 0;}) /* always false */ +#define snd_printd(fmt, args...) do { } while (0) +#define snd_BUG() do { } while (0) +static inline int __snd_bug_on(void) +{ + return 0; +} +#define snd_BUG_ON(cond) __snd_bug_on() /* always false */ #endif /* CONFIG_SND_DEBUG */ -- cgit v1.2.3 From ad93a765c1834db031b5bf1c2baf2a50d0462ca4 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 4 Nov 2008 14:52:55 -0700 Subject: ACPI: Disambiguate processor declaration type Declaring processors in ACPI namespace can be done using either a "Processor" definition or a "Device" definition (see section 8.4 - Declaring Processors; "Advanced Configuration and Power Interface Specification", Revision 3.0b). Currently the two processor declaration types are conflated. This patch disambiguates the processor declaration's definition type enabling subsequent code to behave uniquely based explicitly on the declaration's type. Signed-off-by: Myron Stowe Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 1 + drivers/acpi/scan.c | 2 +- include/acpi/acpi_drivers.h | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f8034c..0c670dd297d7 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -89,6 +89,7 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, 0}, {ACPI_PROCESSOR_HID, 0}, {"", 0}, }; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e0f9f9..3fb6e2db585a 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1043,7 +1043,7 @@ static void acpi_device_set_id(struct acpi_device *device, hid = ACPI_POWER_HID; break; case ACPI_BUS_TYPE_PROCESSOR: - hid = ACPI_PROCESSOR_HID; + hid = ACPI_PROCESSOR_OBJECT_HID; break; case ACPI_BUS_TYPE_SYSTEM: hid = ACPI_SYSTEM_HID; diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index cf04c6011c2a..7469ff397633 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -41,6 +41,7 @@ */ #define ACPI_POWER_HID "LNXPOWER" +#define ACPI_PROCESSOR_OBJECT_HID "ACPI_CPU" #define ACPI_PROCESSOR_HID "ACPI0007" #define ACPI_SYSTEM_HID "LNXSYSTM" #define ACPI_THERMAL_HID "LNXTHERM" -- cgit v1.2.3 From b26e9286fb438eb78bcdb68b67a3dbb8bc539125 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 4 Nov 2008 14:53:00 -0700 Subject: ACPI: Behave uniquely based on processor declaration definition type Associating a Local SAPIC with a processor object is dependent upon the processor object's definition type. CPUs declared as "Processor" should use the Local SAPIC's 'processor_id', and CPUs declared as "Device" should use the 'uid'. Note that for "Processor" declarations, even if a '_UID' child object exists, it has no bearing with respect to mapping Local SAPICs (see section 5.2.11.13 - Local SAPIC Structure; "Advanced Configuration and Power Interface Specification", Revision 3.0b). This patch changes the lsapic mapping logic to rely on the distinction of how the processor object was declared - the mapping can't just try both types of matches regardless of declaration type and rely on one failing as is currently being done. Signed-off-by: Myron Stowe Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 78 ++++++++++++++++++++++++------------------- 1 file changed, 44 insertions(+), 34 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 0c670dd297d7..bc332fc28d7f 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -410,7 +410,7 @@ static int acpi_processor_remove_fs(struct acpi_device *device) /* Use the acpiid in MADT to map cpus in case of SMP */ #ifndef CONFIG_SMP -static int get_cpu_id(acpi_handle handle, u32 acpi_id) {return -1;} +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; } #else static struct acpi_table_madt *madt; @@ -429,27 +429,35 @@ static int map_lapic_id(struct acpi_subtable_header *entry, } static int map_lsapic_id(struct acpi_subtable_header *entry, - u32 acpi_id, int *apic_id) + int device_declaration, u32 acpi_id, int *apic_id) { struct acpi_madt_local_sapic *lsapic = (struct acpi_madt_local_sapic *)entry; + u32 tmp = (lsapic->id << 8) | lsapic->eid; + /* Only check enabled APICs*/ - if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { - /* First check against id */ - if (lsapic->processor_id == acpi_id) { - *apic_id = (lsapic->id << 8) | lsapic->eid; - return 1; - /* Check against optional uid */ - } else if (entry->length >= 16 && - lsapic->uid == acpi_id) { - *apic_id = lsapic->uid; - return 1; - } - } + if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED)) + return 0; + + /* Device statement declaration type */ + if (device_declaration) { + if (entry->length < 16) + printk(KERN_ERR PREFIX + "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n", + tmp); + else if (lsapic->uid == acpi_id) + goto found; + /* Processor statement declaration type */ + } else if (lsapic->processor_id == acpi_id) + goto found; + return 0; +found: + *apic_id = tmp; + return 1; } -static int map_madt_entry(u32 acpi_id) +static int map_madt_entry(int type, u32 acpi_id) { unsigned long madt_end, entry; int apic_id = -1; @@ -470,7 +478,7 @@ static int map_madt_entry(u32 acpi_id) if (map_lapic_id(header, acpi_id, &apic_id)) break; } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - if (map_lsapic_id(header, acpi_id, &apic_id)) + if (map_lsapic_id(header, type, acpi_id, &apic_id)) break; } entry += header->length; @@ -478,7 +486,7 @@ static int map_madt_entry(u32 acpi_id) return apic_id; } -static int map_mat_entry(acpi_handle handle, u32 acpi_id) +static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; @@ -501,7 +509,7 @@ static int map_mat_entry(acpi_handle handle, u32 acpi_id) if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) { map_lapic_id(header, acpi_id, &apic_id); } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - map_lsapic_id(header, acpi_id, &apic_id); + map_lsapic_id(header, type, acpi_id, &apic_id); } exit: @@ -510,14 +518,14 @@ exit: return apic_id; } -static int get_cpu_id(acpi_handle handle, u32 acpi_id) +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { int i; int apic_id = -1; - apic_id = map_mat_entry(handle, acpi_id); + apic_id = map_mat_entry(handle, type, acpi_id); if (apic_id == -1) - apic_id = map_madt_entry(acpi_id); + apic_id = map_madt_entry(type, acpi_id); if (apic_id == -1) return apic_id; @@ -533,15 +541,16 @@ static int get_cpu_id(acpi_handle handle, u32 acpi_id) Driver Interface -------------------------------------------------------------------------- */ -static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) +static int acpi_processor_get_info(struct acpi_device *device) { acpi_status status = 0; union acpi_object object = { 0 }; struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; - int cpu_index; + struct acpi_processor *pr; + int cpu_index, device_declaration = 0; static int cpu0_initialized; - + pr = acpi_driver_data(device); if (!pr) return -EINVAL; @@ -562,22 +571,23 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No bus mastering arbitration control\n")); - /* Check if it is a Device with HID and UID */ - if (has_uid) { + if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) { + /* + * Declared with "Device" statement; match _UID. + * Note that we don't handle string _UIDs yet. + */ unsigned long long value; status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, NULL, &value); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Evaluating processor _UID\n"); + printk(KERN_ERR PREFIX + "Evaluating processor _UID [%#x]\n", status); return -ENODEV; } + device_declaration = 1; pr->acpi_id = value; } else { - /* - * Evalute the processor object. Note that it is common on SMP to - * have the first (boot) processor with a valid PBLK address while - * all others have a NULL address. - */ + /* Declared with "Processor" statement; match ProcessorID */ status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); if (ACPI_FAILURE(status)) { printk(KERN_ERR PREFIX "Evaluating processor object\n"); @@ -590,7 +600,7 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) */ pr->acpi_id = object.processor.proc_id; } - cpu_index = get_cpu_id(pr->handle, pr->acpi_id); + cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id); /* Handle UP system running SMP kernel, with no LAPIC in MADT */ if (!cpu0_initialized && (cpu_index == -1) && @@ -662,7 +672,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) pr = acpi_driver_data(device); - result = acpi_processor_get_info(pr, device->flags.unique_id); + result = acpi_processor_get_info(device); if (result) { /* Processor is physically not present */ return 0; -- cgit v1.2.3 From 5b53ed69158eeff115004f246193d07a083445f6 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 4 Nov 2008 14:53:05 -0700 Subject: ACPI: 80 column adherence and spelling fix (no functional change) Signed-off-by: Myron Stowe Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index bc332fc28d7f..b57b1f05cb38 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -595,9 +595,10 @@ static int acpi_processor_get_info(struct acpi_device *device) } /* - * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. - * >>> 'acpi_get_processor_id(acpi_id, &id)' in arch/xxx/acpi.c - */ + * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. + * >>> 'acpi_get_processor_id(acpi_id, &id)' in + * arch/xxx/acpi.c + */ pr->acpi_id = object.processor.proc_id; } cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id); -- cgit v1.2.3 From d65dcdcf0cd55b4be1fd1f5025388e91042d63fc Mon Sep 17 00:00:00 2001 From: "Thomas, Sujith" Date: Wed, 5 Nov 2008 16:15:13 +0530 Subject: intel_menlow: Add comment documenting legal GTHS values Signed-off-by: Sujith Thomas Signed-off-by: Len Brown --- drivers/misc/intel_menlow.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c index 124b37ddb5c1..27b7662955bb 100644 --- a/drivers/misc/intel_menlow.c +++ b/drivers/misc/intel_menlow.c @@ -52,6 +52,11 @@ MODULE_LICENSE("GPL"); #define MEMORY_ARG_CUR_BANDWIDTH 1 #define MEMORY_ARG_MAX_BANDWIDTH 0 +/* + * GTHS returning 'n' would mean that [0,n-1] states are supported + * In that case max_cstate would be n-1 + * GTHS returning '0' would mean that no bandwidth control states are supported + */ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, unsigned long *max_state) { -- cgit v1.2.3 From f4a9bc4c7de4cef83e86a7052eb2e88b193668e4 Mon Sep 17 00:00:00 2001 From: "Thomas, Sujith" Date: Wed, 5 Nov 2008 16:15:31 +0530 Subject: intel_menlow: MAINTAINERS Signed-off-by: Sujith Thomas Signed-off-by: Len Brown --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 16202c8ac68f..808bb858da27 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2178,6 +2178,13 @@ M: adaplas@gmail.com L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +INTEL MENLOW THERMAL DRIVER +P: Sujith Thomas +M: sujith.thomas@intel.com +L: linux-acpi@vger.kernel.org +W: http://www.lesswatts.org/projects/acpi/ +S: Supported + INTEL IA32 MICROCODE UPDATE SUPPORT P: Tigran Aivazian M: tigran@aivazian.fsnet.co.uk -- cgit v1.2.3 From d17cb18a07c587b8f9ff174a1bf6d03413eabe64 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 6 Nov 2008 20:51:59 -0500 Subject: Revert "ACPI: Ingore the RESET_REG_SUP bit when using ACPI reset mechanism" This reverts commit 8fd145917fb62368a9b80db59562c20576238f5a. http://bugzilla.kernel.org/show_bug.cgi?id=11942 Signed-off-by: Len Brown --- drivers/acpi/reboot.c | 25 +++---------------------- 1 file changed, 3 insertions(+), 22 deletions(-) diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index 755baf2ca70a..a6b662c00b67 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -15,28 +15,9 @@ void acpi_reboot(void) rr = &acpi_gbl_FADT.reset_register; - /* - * Is the ACPI reset register supported? - * - * According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates - * whether the ACPI reset mechanism is supported. - * - * However, some boxes have this bit clear, yet a valid - * ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only - * mechanism that works for them after S3. - * - * This suggests that other operating systems may not be checking - * the RESET_REG_SUP bit, and are using other means to decide - * whether to use the ACPI reboot mechanism or not. - * - * So when acpi reboot is requested, - * only the reset_register is checked. If the following - * conditions are met, it indicates that the reset register is supported. - * a. reset_register is not zero - * b. the access width is eight - * c. the bit_offset is zero - */ - if (!(rr->address) || rr->bit_width != 8 || rr->bit_offset != 0) + /* Is the reset register supported? */ + if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || + rr->bit_width != 8 || rr->bit_offset != 0) return; reset_value = acpi_gbl_FADT.reset_value; -- cgit v1.2.3 From 2d59f6a73e1cb4415cdd5a0083b1196cceffa275 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 1 Aug 2008 10:01:12 -0600 Subject: PNP: add Bjorn Helgaas as PNP co-maintainer Update Adam's email address and add myself as PNP co-maintainer. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 808bb858da27..5cf74926d93e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3336,7 +3336,9 @@ S: Maintained PNP SUPPORT P: Adam Belay -M: ambx1@neo.rr.com +M: abelay@mit.edu +P: Bjorn Helgaas +M: bjorn.helgaas@hp.com S: Maintained PNXxxxx I2C DRIVER -- cgit v1.2.3 From 0794469da3f7b2093575cbdfc1108308dd3641ce Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 30 Oct 2008 01:18:59 +0100 Subject: ACPI: struct device - replace bus_id with dev_name(), dev_set_name() This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Acked-by: Greg Kroah-Hartman Signed-Off-By: Kay Sievers Signed-off-by: Len Brown --- drivers/acpi/ac.c | 2 +- drivers/acpi/battery.c | 2 +- drivers/acpi/processor_core.c | 6 +++--- drivers/acpi/scan.c | 8 ++++---- drivers/acpi/sleep/proc.c | 4 ++-- drivers/acpi/thermal.c | 8 ++++---- drivers/acpi/wmi.c | 2 +- 7 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index d72a1b6c8a94..2d467326d9e0 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -242,7 +242,7 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) acpi_ac_get_state(ac); acpi_bus_generate_proc_event(device, event, (u32) ac->state); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, (u32) ac->state); #ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b2133e89ad9a..e68f2187ed64 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -782,7 +782,7 @@ static void acpi_battery_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, acpi_battery_present(battery)); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, acpi_battery_present(battery)); #ifdef CONFIG_ACPI_SYSFS_POWER /* acpi_batter_update could remove power_supply object */ diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f8034c..cf7e8856a4cd 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -761,20 +761,20 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, pr->performance_platform_limit); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, pr->performance_platform_limit); break; case ACPI_PROCESSOR_NOTIFY_POWER: acpi_processor_cst_has_changed(pr); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; case ACPI_PROCESSOR_NOTIFY_THROTTLING: acpi_processor_tstate_has_changed(pr); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e0f9f9..4dd1f31930b8 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -109,8 +109,7 @@ static int acpi_bus_hot_remove_device(void *context) return 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Hot-removing device %s...\n", device->dev.bus_id)); - + "Hot-removing device %s...\n", dev_name(&device->dev))); if (acpi_bus_trim(device, 1)) { printk(KERN_ERR PREFIX @@ -460,7 +459,7 @@ static int acpi_device_register(struct acpi_device *device, acpi_device_bus_id->instance_no = 0; list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list); } - sprintf(device->dev.bus_id, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); + dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); if (device->parent) { list_add_tail(&device->node, &device->parent->children); @@ -484,7 +483,8 @@ static int acpi_device_register(struct acpi_device *device, result = acpi_device_setup_files(device); if(result) - printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", device->dev.bus_id); + printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", + dev_name(&device->dev)); device->removal_type = ACPI_BUS_REMOVAL_NORMAL; return 0; diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 631ee2ee2ca0..64e591ba86f2 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -366,8 +366,8 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) dev->wakeup.state.enabled ? "enabled" : "disabled"); if (ldev) seq_printf(seq, "%s:%s", - ldev->bus ? ldev->bus->name : "no-bus", - ldev->bus_id); + dev_name(ldev) ? ldev->bus->name : "no-bus", + dev_name(ldev)); seq_printf(seq, "\n"); put_device(ldev); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index ad6cae938f0b..462b16878851 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -576,7 +576,7 @@ static int acpi_thermal_critical(struct acpi_thermal *tz) acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, - tz->device->dev.bus_id, + dev_name(&tz->device->dev), ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); @@ -605,7 +605,7 @@ static int acpi_thermal_hot(struct acpi_thermal *tz) acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, - tz->device->dev.bus_id, + dev_name(&tz->device->dev), ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); @@ -1592,14 +1592,14 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; case ACPI_THERMAL_NOTIFY_DEVICES: acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES); acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c index 47cd7baf9b1b..8a8b377712c9 100644 --- a/drivers/acpi/wmi.c +++ b/drivers/acpi/wmi.c @@ -660,7 +660,7 @@ static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) wblock->handler(event, wblock->handler_data); acpi_bus_generate_netlink_event( - device->pnp.device_class, device->dev.bus_id, + device->pnp.device_class, dev_name(&device->dev), event, 0); break; } -- cgit v1.2.3 From afeb12b7478fee31888e7c34804bee2f658e7765 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 29 Oct 2008 14:13:20 -0700 Subject: fujitsu-laptop: fix section mismatch warning Could fix a bug in a hotplug add scenario. WARNING: drivers/misc/fujitsu-laptop.o(.text+0xbde): Section mismatch in reference from the function acpi_fujitsu_add() to the variable .init.data:fujitsu_dmi_table The function acpi_fujitsu_add() references the variable __initdata fujitsu_dmi_table. This is often because acpi_fujitsu_add lacks a __initdata annotation or the annotation of fujitsu_dmi_table is wrong. Signed-off-by: Randy Dunlap Acked-by: Jonathan Woithe Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/misc/fujitsu-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index d2cf0bfe3163..9124fcdc4d09 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -473,7 +473,7 @@ static int dmi_check_cb_p8010(const struct dmi_system_id *id) return 0; } -static struct dmi_system_id __initdata fujitsu_dmi_table[] = { +static struct dmi_system_id fujitsu_dmi_table[] = { { .ident = "Fujitsu Siemens S6410", .matches = { -- cgit v1.2.3 From 14a63ba821ac2a0f5166789b31241c0b7eb147d9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 29 Oct 2008 14:13:22 -0700 Subject: ACPI: use macro to replace hard number Impact: cleanup Use MACRO for rev 3 fadt id instead of 3 directly. Signed-off-by: Yinghai Lu Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/tables/tbfadt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c index 2c7885e7ffba..2817158fb6a1 100644 --- a/drivers/acpi/tables/tbfadt.c +++ b/drivers/acpi/tables/tbfadt.c @@ -304,7 +304,7 @@ static void acpi_tb_convert_fadt(void) * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at * offset 45, 55, 95, and the word located at offset 109, 110. */ - if (acpi_gbl_FADT.header.revision < 3) { + if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) { acpi_gbl_FADT.preferred_profile = 0; acpi_gbl_FADT.pstate_control = 0; acpi_gbl_FADT.cst_control = 0; -- cgit v1.2.3 From 4feba70a2c1a1a0c96909f657f48b2e11e682370 Mon Sep 17 00:00:00 2001 From: Peter Gruber Date: Mon, 27 Oct 2008 23:59:36 -0400 Subject: ACPI: avoid empty file name in sysfs Since commit bc45b1d39a925b56796bebf8a397a0491489d85c acpi tables are allowed to have an empty signature and /sys/firmware/acpi/tables uses the signature as filename. Applications using naive recursion through /sys loop forever. A possible solution would be: (replacing the zero length filename with the string "NULL") http://bugzilla.kernel.org/show_bug.cgi?id=11539 Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/system.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171b7940..62ec75e79120 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -78,9 +78,15 @@ static ssize_t acpi_table_show(struct kobject *kobj, container_of(bin_attr, struct acpi_table_attr, attr); struct acpi_table_header *table_header = NULL; acpi_status status; + char name[ACPI_NAME_SIZE]; + + if (strncmp(table_attr->name, "NULL", 4)) + memcpy(name, table_attr->name, ACPI_NAME_SIZE); + else + memcpy(name, "\0\0\0\0", 4); status = - acpi_get_table(table_attr->name, table_attr->instance, + acpi_get_table(name, table_attr->instance, &table_header); if (ACPI_FAILURE(status)) return -ENODEV; @@ -95,21 +101,24 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr, struct acpi_table_header *header = NULL; struct acpi_table_attr *attr = NULL; - memcpy(table_attr->name, table_header->signature, ACPI_NAME_SIZE); + if (table_header->signature[0] != '\0') + memcpy(table_attr->name, table_header->signature, + ACPI_NAME_SIZE); + else + memcpy(table_attr->name, "NULL", 4); list_for_each_entry(attr, &acpi_table_attr_list, node) { - if (!memcmp(table_header->signature, attr->name, - ACPI_NAME_SIZE)) + if (!memcmp(table_attr->name, attr->name, ACPI_NAME_SIZE)) if (table_attr->instance < attr->instance) table_attr->instance = attr->instance; } table_attr->instance++; if (table_attr->instance > 1 || (table_attr->instance == 1 && - !acpi_get_table(table_header-> - signature, 2, - &header))) - sprintf(table_attr->name + 4, "%d", table_attr->instance); + !acpi_get_table + (table_header->signature, 2, &header))) + sprintf(table_attr->name + ACPI_NAME_SIZE, "%d", + table_attr->instance); table_attr->attr.size = 0; table_attr->attr.read = acpi_table_show; -- cgit v1.2.3 From 70e90679ffce0937deb77e2bd8bd918a24a897fd Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 6 Nov 2008 23:08:37 -0800 Subject: af_key: mark policy as dead before destroying xfrm_policy_destroy() will oops if not dead policy is passed to it. On error path in pfkey_compile_policy() exactly this happens. Oopsable for CAP_NET_ADMIN owners. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/key/af_key.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/key/af_key.c b/net/key/af_key.c index 3440a4637f01..5b22e011653b 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3188,6 +3188,7 @@ static struct xfrm_policy *pfkey_compile_policy(struct sock *sk, int opt, return xp; out: + xp->walk.dead = 1; xfrm_policy_destroy(xp); return NULL; } -- cgit v1.2.3 From f29c9b1ccb52904ee442a933cf3dee628f9f4e62 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 6 Nov 2008 09:45:16 +0800 Subject: sched: fix a bug in sched domain degenerate Impact: re-add incorrectly eliminated sched domain layers (1) on i386 with SCHED_SMT and SCHED_MC enabled # mount -t cgroup -o cpuset xxx /mnt # echo 0 > /mnt/cpuset.sched_load_balance # mkdir /mnt/0 # echo 0 > /mnt/0/cpuset.cpus # dmesg CPU0 attaching sched-domain: domain 0: span 0 level CPU groups: 0 (2) on i386 with SCHED_MC enabled but SCHED_SMT disabled # same with (1) # dmesg CPU0 attaching NULL sched-domain. The bug is that some sched domains may be skipped unintentionally when degenerating (optimizing) sched domains. Signed-off-by: Li Zefan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 82cc839c9210..4c7e2bcdfa89 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6877,15 +6877,17 @@ cpu_attach_domain(struct sched_domain *sd, struct root_domain *rd, int cpu) struct sched_domain *tmp; /* Remove the sched domains which do not contribute to scheduling. */ - for (tmp = sd; tmp; tmp = tmp->parent) { + for (tmp = sd; tmp; ) { struct sched_domain *parent = tmp->parent; if (!parent) break; + if (sd_parent_degenerate(tmp, parent)) { tmp->parent = parent->parent; if (parent->parent) parent->parent->child = tmp; - } + } else + tmp = tmp->parent; } if (sd && sd_degenerate(sd)) { -- cgit v1.2.3 From ca3273f9646694e0419cfb9d6c12deb1c9aff27c Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 7 Nov 2008 14:47:21 +0800 Subject: sched: fix memory leak in a failure path Impact: fix rare memory leak in the sched-domains manual reconfiguration code In the failure path, rd is not attached to a sched domain, so it causes a leak. Signed-off-by: Li Zefan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched.c b/kernel/sched.c index 4c7e2bcdfa89..57c933ffbee1 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7676,6 +7676,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, error: free_sched_groups(cpu_map, tmpmask); SCHED_CPUMASK_FREE((void *)allmasks); + kfree(rd); return -ENOMEM; #endif } -- cgit v1.2.3 From c1adbb9681c30e984272b66623c4d5774b3981e1 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 5 Nov 2008 16:53:50 +0200 Subject: mlx4_en: Start port error flow bug fix Tried to deactivate rx ring that wasn't activated, used wrong index. Signed-off-by: Yevgeny Petrilin Signed-off-by: Jeff Garzik --- drivers/net/mlx4/en_netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index a339afbeed38..a3f732418c49 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -706,7 +706,7 @@ tx_err: mlx4_en_release_rss_steer(priv); rx_err: for (i = 0; i < priv->rx_ring_num; i++) - mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[rx_index]); + mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]); cq_err: while (rx_index--) mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]); -- cgit v1.2.3 From db053c6b447d083f3c63e5540b70a3e521b468ca Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Tue, 4 Nov 2008 13:32:31 +0200 Subject: hso: rfkill type should be WWAN Signed-off-by: Paulius Zaleckas Cc: Denis Joseph Barrow Signed-off-by: Jeff Garzik --- drivers/net/usb/hso.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 1164c52e2c0a..3f49e8382dd8 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2188,7 +2188,7 @@ static void hso_create_rfkill(struct hso_device *hso_dev, char *rfkn; hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev, - RFKILL_TYPE_WLAN); + RFKILL_TYPE_WWAN); if (!hso_net->rfkill) { dev_err(dev, "%s - Out of memory", __func__); return; -- cgit v1.2.3 From 08809b25cf64a7d8deb336b779e527e88830eac9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 1 Nov 2008 18:20:19 +0000 Subject: el3_common_init() should be __devinit, not __init Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/3c509.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 3a7bc524af33..c7a4f3bcc2bc 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -94,7 +94,7 @@ #include #include -static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; +static char version[] __devinitdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; #ifdef EL3_DEBUG static int el3_debug = EL3_DEBUG; @@ -186,7 +186,7 @@ static int max_interrupt_work = 10; static int nopnp; #endif -static int __init el3_common_init(struct net_device *dev); +static int __devinit el3_common_init(struct net_device *dev); static void el3_common_remove(struct net_device *dev); static ushort id_read_eeprom(int index); static ushort read_eeprom(int ioaddr, int index); @@ -537,7 +537,7 @@ static struct mca_driver el3_mca_driver = { static int mca_registered; #endif /* CONFIG_MCA */ -static int __init el3_common_init(struct net_device *dev) +static int __devinit el3_common_init(struct net_device *dev) { struct el3_private *lp = netdev_priv(dev); int err; -- cgit v1.2.3 From cd17fa7b8f1dd24b23c464ebcb14e7c058e15097 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 3 Nov 2008 23:08:04 +0000 Subject: sfc: Correct address of gPXE boot configuration in EEPROM Due to a hardware bug, the originally assigned range cannot reliably be used for boot configuration and must not be modifiable through ethtool. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index fa98af58223e..cd0d0873d978 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -174,8 +174,8 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = { /* EEPROM range with gPXE configuration */ #define EFX_ETHTOOL_EEPROM_MAGIC 0xEFAB -#define EFX_ETHTOOL_EEPROM_MIN 0x100U -#define EFX_ETHTOOL_EEPROM_MAX 0x400U +#define EFX_ETHTOOL_EEPROM_MIN 0x800U +#define EFX_ETHTOOL_EEPROM_MAX 0x1800U /************************************************************************** * -- cgit v1.2.3 From 939a9516416ad8ccec27aa05bd19236c550c0c03 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Tue, 4 Nov 2008 07:51:38 +0000 Subject: [netdrvr] usb/hso: Cleanup rfkill error handling Yup, this appears to be the problem, thanks. I think &hso_net->net->dev is more intuitive for the error message, so I've used that. I've also added missing line endings on the error messages and set our local rfkill structure element to NULL on failure so we don't try to call rfkill_unregister on driver removal if we failed to register at all. The patch below Works For Me (TM); the device is detected fine, can be removed without problems and connects ok. I'll have a prod at why the rfkill stuff isn't working next, but I believe this cleanup of the error handling is appropriate no matter what the issue with registration is. Signed-Off-By: Jonathan McDowell Signed-off-by: Jeff Garzik --- drivers/net/usb/hso.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 3f49e8382dd8..8e90891f0e42 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2184,19 +2184,20 @@ static void hso_create_rfkill(struct hso_device *hso_dev, struct usb_interface *interface) { struct hso_net *hso_net = dev2net(hso_dev); - struct device *dev = hso_dev->dev; + struct device *dev = &hso_net->net->dev; char *rfkn; hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev, RFKILL_TYPE_WWAN); if (!hso_net->rfkill) { - dev_err(dev, "%s - Out of memory", __func__); + dev_err(dev, "%s - Out of memory\n", __func__); return; } rfkn = kzalloc(20, GFP_KERNEL); if (!rfkn) { rfkill_free(hso_net->rfkill); - dev_err(dev, "%s - Out of memory", __func__); + hso_net->rfkill = NULL; + dev_err(dev, "%s - Out of memory\n", __func__); return; } snprintf(rfkn, 20, "hso-%d", @@ -2209,7 +2210,8 @@ static void hso_create_rfkill(struct hso_device *hso_dev, kfree(rfkn); hso_net->rfkill->name = NULL; rfkill_free(hso_net->rfkill); - dev_err(dev, "%s - Failed to register rfkill", __func__); + hso_net->rfkill = NULL; + dev_err(dev, "%s - Failed to register rfkill\n", __func__); return; } } -- cgit v1.2.3 From 9b46333406b9cb3397ab538485a4d57c316af0ff Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 28 Oct 2008 19:22:34 +1100 Subject: vmap: cope with vm_unmap_aliases before vmalloc_init() Xen can end up calling vm_unmap_aliases() before vmalloc_init() has been called. In this case its safe to make it a simple no-op. Signed-off-by: Jeremy Fitzhardinge Cc: Linux Memory Management List Cc: Nick Piggin Signed-off-by: Ingo Molnar --- mm/vmalloc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 66fad3fc02b1..ba6b0f5f7fac 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -592,6 +592,8 @@ static void free_unmap_vmap_area_addr(unsigned long addr) #define VMAP_BLOCK_SIZE (VMAP_BBMAP_BITS * PAGE_SIZE) +static bool vmap_initialized __read_mostly = false; + struct vmap_block_queue { spinlock_t lock; struct list_head free; @@ -828,6 +830,9 @@ void vm_unmap_aliases(void) int cpu; int flush = 0; + if (unlikely(!vmap_initialized)) + return; + for_each_possible_cpu(cpu) { struct vmap_block_queue *vbq = &per_cpu(vmap_block_queue, cpu); struct vmap_block *vb; @@ -942,6 +947,8 @@ void __init vmalloc_init(void) INIT_LIST_HEAD(&vbq->dirty); vbq->nr_dirty = 0; } + + vmap_initialized = true; } void unmap_kernel_range(unsigned long addr, unsigned long size) -- cgit v1.2.3 From d05fdf316067cd311d5e7add08da26ded8a58080 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 28 Oct 2008 19:23:06 +1100 Subject: xen: make sure stray alias mappings are gone before pinning Xen requires that all mappings of pagetable pages are read-only, so that they can't be updated illegally. As a result, if a page is being turned into a pagetable page, we need to make sure all its mappings are RO. If the page had been used for ioremap or vmalloc, it may still have left over mappings as a result of not having been lazily unmapped. This change makes sure we explicitly mop them all up before pinning the page. Unlike aliases created by kmap, the there can be vmalloc aliases even for non-high pages, so we must do the flush unconditionally. Signed-off-by: Jeremy Fitzhardinge Cc: Linux Memory Management List Cc: Nick Piggin Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 5 +++-- arch/x86/xen/mmu.c | 9 ++++++--- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index b61534c7a4c4..5e4686d70f62 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -863,15 +863,16 @@ static void xen_alloc_ptpage(struct mm_struct *mm, unsigned long pfn, unsigned l if (PagePinned(virt_to_page(mm->pgd))) { SetPagePinned(page); + vm_unmap_aliases(); if (!PageHighMem(page)) { make_lowmem_page_readonly(__va(PFN_PHYS((unsigned long)pfn))); if (level == PT_PTE && USE_SPLIT_PTLOCKS) pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn); - } else + } else { /* make sure there are no stray mappings of this page */ kmap_flush_unused(); - vm_unmap_aliases(); + } } } diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index aba77b2b7d18..89f3b6edc65a 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -850,13 +850,16 @@ static int xen_pin_page(struct mm_struct *mm, struct page *page, read-only, and can be pinned. */ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd) { + vm_unmap_aliases(); + xen_mc_batch(); - if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) { - /* re-enable interrupts for kmap_flush_unused */ + if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) { + /* re-enable interrupts for flushing */ xen_mc_issue(0); + kmap_flush_unused(); - vm_unmap_aliases(); + xen_mc_batch(); } -- cgit v1.2.3 From 7e2d9bfa4eabee3e1919a40f20d2ef8b569bd07e Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 5 Nov 2008 16:09:04 +0200 Subject: UBIFS: allow for gaps when dirtying the LPT The LPT may have gaps in it because initially empty LEBs are not added by mkfs.ubifs - because it does not know how many there are. Then UBIFS allocates empty LEBs in the reverse order that they are discovered i.e. they are added to, and removed from, the front of a list. That creates a gap in the middle of the LPT. The function dirtying the LPT tree (for the purpose of small model garbage collection) assumed that a gap could only occur at the very end of the LPT and stopped dirtying prematurely, which in turn resulted in the LPT running out of space - something that is designed to be impossible. Signed-off-by: Adrian Hunter --- fs/ubifs/lpt_commit.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/ubifs/lpt_commit.c b/fs/ubifs/lpt_commit.c index eed5a0025d63..a41434b42785 100644 --- a/fs/ubifs/lpt_commit.c +++ b/fs/ubifs/lpt_commit.c @@ -571,8 +571,6 @@ static struct ubifs_pnode *next_pnode(struct ubifs_info *c, /* We assume here that LEB zero is never an LPT LEB */ if (nnode->nbranch[iip].lnum) return ubifs_get_pnode(c, nnode, iip); - else - return NULL; } /* Go up while can't go right */ -- cgit v1.2.3 From cd83e42c6b0413dcbb548c2ead799111ff7e6a13 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 7 Nov 2008 11:12:29 +1100 Subject: cpumask: new API, v2 - add cpumask_of() - add free_bootmem_cpumask_var() Signed-off-by: Rusty Russell Signed-off-by: Ingo Molnar --- include/linux/cpumask.h | 11 +++++++++++ lib/cpumask.c | 5 +++++ 2 files changed, 16 insertions(+) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index c8e66619097b..31caa1bc620a 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -893,6 +893,12 @@ static inline void cpumask_copy(struct cpumask *dstp, */ #define cpumask_any_and(mask1, mask2) cpumask_first_and((mask1), (mask2)) +/** + * cpumask_of - the cpumask containing just a given cpu + * @cpu: the cpu (<= nr_cpu_ids) + */ +#define cpumask_of(cpu) (get_cpu_mask(cpu)) + /** * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask * * @bitmap: the bitmap @@ -946,6 +952,7 @@ typedef struct cpumask *cpumask_var_t; bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags); void alloc_bootmem_cpumask_var(cpumask_var_t *mask); void free_cpumask_var(cpumask_var_t mask); +void free_bootmem_cpumask_var(cpumask_var_t mask); #else typedef struct cpumask cpumask_var_t[1]; @@ -962,6 +969,10 @@ static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask) static inline void free_cpumask_var(cpumask_var_t mask) { } + +static inline void free_bootmem_cpumask_var(cpumask_var_t mask) +{ +} #endif /* CONFIG_CPUMASK_OFFSTACK */ /* The pointer versions of the maps, these will become the primary versions. */ diff --git a/lib/cpumask.c b/lib/cpumask.c index 5ceb4211c834..2ebc3a9a7465 100644 --- a/lib/cpumask.c +++ b/lib/cpumask.c @@ -107,4 +107,9 @@ void free_cpumask_var(cpumask_var_t mask) kfree(mask); } EXPORT_SYMBOL(free_cpumask_var); + +void free_bootmem_cpumask_var(cpumask_var_t mask) +{ + free_bootmem((unsigned long)mask, cpumask_size()); +} #endif -- cgit v1.2.3 From ed9b3e3379731e9f9d2f73f3d7fd9e7d2ce3df4a Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 7 Nov 2008 09:06:45 -0500 Subject: ext4: Mark the buffer_heads as dirty and uptodate after prepare_write We need to make sure we mark the buffer_heads as dirty and uptodate so that block_write_full_page write them correctly. This fixes mmap corruptions that can occur in low memory situations. Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 5a130b56f1cf..be21a5ae33cb 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2329,6 +2329,8 @@ static int ext4_da_writepage(struct page *page, unlock_page(page); return 0; } + /* now mark the buffer_heads as dirty and uptodate */ + block_commit_write(page, 0, PAGE_CACHE_SIZE); } if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode)) -- cgit v1.2.3 From 23712a9c28b9f80a8cf70c8490358d5f562d2465 Mon Sep 17 00:00:00 2001 From: Frederic Bohe Date: Fri, 7 Nov 2008 09:21:01 -0500 Subject: ext4: add checksum calculation when clearing UNINIT flag in ext4_new_inode When initializing an uninitialized block group in ext4_new_inode(), its block group checksum must be re-calculated. This fixes a race when several threads try to allocate a new inode in an UNINIT'd group. There is some question whether we need to be initializing the block bitmap in ext4_new_inode() at all, but for now, if we are going to init the block group, let's eliminate the race. Signed-off-by: Frederic Bohe Signed-off-by: "Theodore Ts'o" --- fs/ext4/ialloc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index fe34d74cfb19..2a117e286e54 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -718,6 +718,8 @@ got: gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT); free = ext4_free_blocks_after_init(sb, group, gdp); gdp->bg_free_blocks_count = cpu_to_le16(free); + gdp->bg_checksum = ext4_group_desc_csum(sbi, group, + gdp); } spin_unlock(sb_bgl_lock(sbi, group)); -- cgit v1.2.3 From 14800984706bf6936bbec5187f736e928be5c218 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Fri, 7 Nov 2008 15:26:50 +0100 Subject: sched: fine-tune SD_MC_INIT Tune SD_MC_INIT the same way as SD_CPU_INIT: unset SD_BALANCE_NEWIDLE, and set SD_WAKE_BALANCE. This improves vmark by 5%: vmark 132102 125968 125497 messages/sec avg 127855.66 .984 vmark 139404 131719 131272 messages/sec avg 134131.66 1.033 Signed-off-by: Mike Galbraith Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar # *DOCUMENTATION* --- include/linux/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/topology.h b/include/linux/topology.h index 34a7ee0ebed2..a8d840595b7e 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -120,10 +120,10 @@ void arch_update_cpu_topology(void); .wake_idx = 1, \ .forkexec_idx = 1, \ .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_NEWIDLE \ | SD_BALANCE_FORK \ | SD_BALANCE_EXEC \ | SD_WAKE_AFFINE \ + | SD_WAKE_BALANCE \ | SD_SHARE_PKG_RESOURCES\ | BALANCE_FOR_MC_POWER, \ .last_balance = jiffies, \ -- cgit v1.2.3 From 52c642f33b14bfa1b00ef2b68296effb34a573f3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 7 Nov 2008 16:09:23 +0100 Subject: sched: fine-tune SD_SIBLING_INIT fine-tune the HT sched-domains parameters as well. On a HT capable box, this increases lat_ctx performance from 23.87 usecs to 1.49 usecs: # before $ ./lat_ctx -s 0 2 "size=0k ovr=1.89 2 23.87 # after $ ./lat_ctx -s 0 2 "size=0k ovr=1.84 2 1.49 Signed-off-by: Ingo Molnar --- include/linux/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/topology.h b/include/linux/topology.h index a8d840595b7e..117f1b7405cf 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -99,7 +99,7 @@ void arch_update_cpu_topology(void); | SD_BALANCE_FORK \ | SD_BALANCE_EXEC \ | SD_WAKE_AFFINE \ - | SD_WAKE_IDLE \ + | SD_WAKE_BALANCE \ | SD_SHARE_CPUPOWER, \ .last_balance = jiffies, \ .balance_interval = 1, \ -- cgit v1.2.3 From 8638545c3668231675dcf8f46afa7ed5930a6b02 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 7 Nov 2008 16:03:46 +0000 Subject: trivial: dmi_scan typo As we've lost our trivial maintainer for the moment I'll send this directly. Only touches a comment Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/firmware/dmi_scan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 3e526b6d00cb..8daf4793ac32 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -81,9 +81,9 @@ static void dmi_table(u8 *buf, int len, int num, const struct dmi_header *dm = (const struct dmi_header *)data; /* - * We want to know the total length (formated area and strings) - * before decoding to make sure we won't run off the table in - * dmi_decode or dmi_string + * We want to know the total length (formatted area and + * strings) before decoding to make sure we won't run off the + * table in dmi_decode or dmi_string */ data += dm->length; while ((data - buf < len - 1) && (data[0] || data[1])) -- cgit v1.2.3 From 54e7ff9d6249ba88e393d7fbc8008da9279723be Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 7 Nov 2008 16:07:02 +0000 Subject: trivial: MPT fusion - remove long dead code This triggers false bug reports as it does a bogus kmalloc with locks held but is never really compiled into the kernel. Closes #8329 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/message/fusion/mptlan.c | 108 ---------------------------------------- 1 file changed, 108 deletions(-) diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c index a1abf95cf751..603ffd008c73 100644 --- a/drivers/message/fusion/mptlan.c +++ b/drivers/message/fusion/mptlan.c @@ -77,12 +77,6 @@ MODULE_VERSION(my_VERSION); * Fusion MPT LAN private structures */ -struct NAA_Hosed { - u16 NAA; - u8 ieee[FC_ALEN]; - struct NAA_Hosed *next; -}; - struct BufferControl { struct sk_buff *skb; dma_addr_t dma; @@ -159,11 +153,6 @@ static u8 LanCtx = MPT_MAX_PROTOCOL_DRIVERS; static u32 max_buckets_out = 127; static u32 tx_max_out_p = 127 - 16; -#ifdef QLOGIC_NAA_WORKAROUND -static struct NAA_Hosed *mpt_bad_naa = NULL; -DEFINE_RWLOCK(bad_naa_lock); -#endif - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * lan_reply - Handle all data sent from the hardware. @@ -780,30 +769,6 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev) // ctx, skb, skb->data)); mac = skb_mac_header(skb); -#ifdef QLOGIC_NAA_WORKAROUND -{ - struct NAA_Hosed *nh; - - /* Munge the NAA for Tx packets to QLogic boards, which don't follow - RFC 2625. The longer I look at this, the more my opinion of Qlogic - drops. */ - read_lock_irq(&bad_naa_lock); - for (nh = mpt_bad_naa; nh != NULL; nh=nh->next) { - if ((nh->ieee[0] == mac[0]) && - (nh->ieee[1] == mac[1]) && - (nh->ieee[2] == mac[2]) && - (nh->ieee[3] == mac[3]) && - (nh->ieee[4] == mac[4]) && - (nh->ieee[5] == mac[5])) { - cur_naa = nh->NAA; - dlprintk ((KERN_INFO "mptlan/sdu_send: using NAA value " - "= %04x.\n", cur_naa)); - break; - } - } - read_unlock_irq(&bad_naa_lock); -} -#endif pTrans->TransactionDetails[0] = cpu_to_le32((cur_naa << 16) | (mac[0] << 8) | @@ -1572,79 +1537,6 @@ mpt_lan_type_trans(struct sk_buff *skb, struct net_device *dev) fcllc = (struct fcllc *)skb->data; -#ifdef QLOGIC_NAA_WORKAROUND -{ - u16 source_naa = fch->stype, found = 0; - - /* Workaround for QLogic not following RFC 2625 in regards to the NAA - value. */ - - if ((source_naa & 0xF000) == 0) - source_naa = swab16(source_naa); - - if (fcllc->ethertype == htons(ETH_P_ARP)) - dlprintk ((KERN_INFO "mptlan/type_trans: got arp req/rep w/ naa of " - "%04x.\n", source_naa)); - - if ((fcllc->ethertype == htons(ETH_P_ARP)) && - ((source_naa >> 12) != MPT_LAN_NAA_RFC2625)){ - struct NAA_Hosed *nh, *prevnh; - int i; - - dlprintk ((KERN_INFO "mptlan/type_trans: ARP Req/Rep from " - "system with non-RFC 2625 NAA value (%04x).\n", - source_naa)); - - write_lock_irq(&bad_naa_lock); - for (prevnh = nh = mpt_bad_naa; nh != NULL; - prevnh=nh, nh=nh->next) { - if ((nh->ieee[0] == fch->saddr[0]) && - (nh->ieee[1] == fch->saddr[1]) && - (nh->ieee[2] == fch->saddr[2]) && - (nh->ieee[3] == fch->saddr[3]) && - (nh->ieee[4] == fch->saddr[4]) && - (nh->ieee[5] == fch->saddr[5])) { - found = 1; - dlprintk ((KERN_INFO "mptlan/type_trans: ARP Re" - "q/Rep w/ bad NAA from system already" - " in DB.\n")); - break; - } - } - - if ((!found) && (nh == NULL)) { - - nh = kmalloc(sizeof(struct NAA_Hosed), GFP_KERNEL); - dlprintk ((KERN_INFO "mptlan/type_trans: ARP Req/Rep w/" - " bad NAA from system not yet in DB.\n")); - - if (nh != NULL) { - nh->next = NULL; - if (!mpt_bad_naa) - mpt_bad_naa = nh; - if (prevnh) - prevnh->next = nh; - - nh->NAA = source_naa; /* Set the S_NAA value. */ - for (i = 0; i < FC_ALEN; i++) - nh->ieee[i] = fch->saddr[i]; - dlprintk ((KERN_INFO "Got ARP from %02x:%02x:%02x:%02x:" - "%02x:%02x with non-compliant S_NAA value.\n", - fch->saddr[0], fch->saddr[1], fch->saddr[2], - fch->saddr[3], fch->saddr[4],fch->saddr[5])); - } else { - printk (KERN_ERR "mptlan/type_trans: Unable to" - " kmalloc a NAA_Hosed struct.\n"); - } - } else if (!found) { - printk (KERN_ERR "mptlan/type_trans: found not" - " set, but nh isn't null. Evil " - "funkiness abounds.\n"); - } - write_unlock_irq(&bad_naa_lock); - } -} -#endif /* Strip the SNAP header from ARP packets since we don't * pass them through to the 802.2/SNAP layers. -- cgit v1.2.3 From 7c64ade53a6f977d73f16243865c42ceae999aea Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 7 Nov 2008 14:02:49 +0100 Subject: oprofile: Fix p6 counter overflow check Fix the counter overflow check for CPUs with counter width > 32 I had a similar change in a different patch that I didn't submit and I didn't notice the problem earlier because it was always tested together. Signed-off-by: Andi Kleen Signed-off-by: Robert Richter --- arch/x86/oprofile/op_model_ppro.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index 0620d6d45f7d..3f1b81a83e2e 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -27,8 +27,7 @@ static int num_counters = 2; static int counter_width = 32; #define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0) -#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0) -#define CTR_OVERFLOWED(n) (!((n) & (1U<<(counter_width-1)))) +#define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1)))) #define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0) #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0) @@ -124,14 +123,14 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) static int ppro_check_ctrs(struct pt_regs * const regs, struct op_msrs const * const msrs) { - unsigned int low, high; + u64 val; int i; for (i = 0 ; i < num_counters; ++i) { if (!reset_value[i]) continue; - CTR_READ(low, high, msrs, i); - if (CTR_OVERFLOWED(low)) { + rdmsrl(msrs->counters[i].addr, val); + if (CTR_OVERFLOWED(val)) { oprofile_add_sample(regs, i); wrmsrl(msrs->counters[i].addr, -reset_value[i]); } -- cgit v1.2.3 From 17c1f07ed70afa4f3941745fc3cc173e2a0365fe Mon Sep 17 00:00:00 2001 From: Jay Lan Date: Fri, 7 Nov 2008 09:51:55 -0800 Subject: [IA64] Reserve elfcorehdr memory in CONFIG_CRASH_DUMP IA64 kdump kernel failed to initialize /proc/vmcore in 2.6.28-rc2. A bug was introduced in this patch commit: d9a9855d0b06ca6d6cc92596fedcc03f8512e062 always reserve elfcore header memory in crash kernel The problem was that the call to reserve_elfcorehdr() should be placed in CONFIG_CRASH_DUMP rather than in CONFIG_CRASH_KERNEL, which does not exist. Signed-off-by: Jay Lan Acked-by: Simon Hormon Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index bf441f49682c..865af27c7737 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -359,7 +359,7 @@ reserve_memory (void) } #endif -#ifdef CONFIG_CRASH_KERNEL +#ifdef CONFIG_CRASH_DUMP if (reserve_elfcorehdr(&rsvd_region[n].start, &rsvd_region[n].end) == 0) n++; -- cgit v1.2.3 From d21cf3c16b1191f3154a51e0b20c82bf851cc553 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 3 Nov 2008 14:26:40 -0500 Subject: ACPI EC: Fix regression due to use of uninitialized variable breakage introduced by following patch commit 27663c5855b10af9ec67bc7dfba001426ba21222 Author: Matthew Wilcox Date: Fri Oct 10 02:22:59 2008 -0400 acpi_evaluate_integer() does not clear passed variable if there is an error at evaluation. So if we ignore error, we must supply initialized variable. http://bugzilla.kernel.org/show_bug.cgi?id=11917 Signed-off-by: Alexey Starikovskiy Tested-by: Alan Jenkins Signed-off-by: Len Brown --- drivers/acpi/ec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ef42316f89f5..523ac5b229a5 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -736,7 +736,7 @@ static acpi_status ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval) { acpi_status status; - unsigned long long tmp; + unsigned long long tmp = 0; struct acpi_ec *ec = context; status = acpi_walk_resources(handle, METHOD_NAME__CRS, @@ -751,6 +751,7 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval) return status; ec->gpe = tmp; /* Use the global lock for all EC transactions? */ + tmp = 0; acpi_evaluate_integer(handle, "_GLK", NULL, &tmp); ec->global_lock = tmp; ec->handle = handle; -- cgit v1.2.3 From 89595b8f2850a080d290bf778ec933ea1d99f78e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:57:45 -0700 Subject: ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.h Move all the component definitions for drivers to a single shared place, include/acpi/acpi_drivers.h. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/ac.c | 1 - drivers/acpi/acpi_memhotplug.c | 1 - drivers/acpi/battery.c | 1 - drivers/acpi/button.c | 1 - drivers/acpi/cm_sbs.c | 1 - drivers/acpi/container.c | 1 - drivers/acpi/fan.c | 1 - drivers/acpi/power.c | 3 +-- drivers/acpi/processor_core.c | 1 - drivers/acpi/processor_idle.c | 1 - drivers/acpi/processor_perflib.c | 2 +- drivers/acpi/processor_thermal.c | 1 - drivers/acpi/processor_throttling.c | 2 +- drivers/acpi/thermal.c | 1 - drivers/acpi/video.c | 1 - include/acpi/acpi_drivers.h | 13 ++++++++++++- 16 files changed, 15 insertions(+), 17 deletions(-) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index d72a1b6c8a94..5cdd713a0eaf 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -37,7 +37,6 @@ #include #include -#define ACPI_AC_COMPONENT 0x00020000 #define ACPI_AC_CLASS "ac_adapter" #define ACPI_AC_DEVICE_NAME "AC Adapter" #define ACPI_AC_FILE_STATE "state" diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 71d21c51c45f..63a17b55b39b 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -32,7 +32,6 @@ #include #include -#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000UL #define ACPI_MEMORY_DEVICE_CLASS "memory" #define ACPI_MEMORY_DEVICE_HID "PNP0C80" #define ACPI_MEMORY_DEVICE_NAME "Hotplug Mem Device" diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b2133e89ad9a..47f6e38fa6c8 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -46,7 +46,6 @@ #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF -#define ACPI_BATTERY_COMPONENT 0x00040000 #define ACPI_BATTERY_CLASS "battery" #define ACPI_BATTERY_DEVICE_NAME "Battery" #define ACPI_BATTERY_NOTIFY_STATUS 0x80 diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index cb046c3fc3f2..fd7ca289cb02 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -33,7 +33,6 @@ #include #include -#define ACPI_BUTTON_COMPONENT 0x00080000 #define ACPI_BUTTON_CLASS "button" #define ACPI_BUTTON_FILE_INFO "info" #define ACPI_BUTTON_FILE_STATE "state" diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c index 80d5c88e68c3..307963bd1043 100644 --- a/drivers/acpi/cm_sbs.c +++ b/drivers/acpi/cm_sbs.c @@ -34,7 +34,6 @@ ACPI_MODULE_NAME("cm_sbs"); #define ACPI_AC_CLASS "ac_adapter" #define ACPI_BATTERY_CLASS "battery" -#define ACPI_SBS_COMPONENT 0x00080000 #define _COMPONENT ACPI_SBS_COMPONENT static struct proc_dir_entry *acpi_ac_dir; static struct proc_dir_entry *acpi_battery_dir; diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index 134818b265a9..17020c12623c 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -41,7 +41,6 @@ #define INSTALL_NOTIFY_HANDLER 1 #define UNINSTALL_NOTIFY_HANDLER 2 -#define ACPI_CONTAINER_COMPONENT 0x01000000 #define _COMPONENT ACPI_CONTAINER_COMPONENT ACPI_MODULE_NAME("container"); diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 60d54d1f6b19..eaaee1660bdf 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -34,7 +34,6 @@ #include #include -#define ACPI_FAN_COMPONENT 0x00200000 #define ACPI_FAN_CLASS "fan" #define ACPI_FAN_FILE_STATE "state" diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index a1718e56103b..81f583f8098b 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -44,9 +44,8 @@ #include #include -#define _COMPONENT ACPI_POWER_COMPONENT +#define _COMPONENT ACPI_POWER_COMPONENT ACPI_MODULE_NAME("power"); -#define ACPI_POWER_COMPONENT 0x00800000 #define ACPI_POWER_CLASS "power_resource" #define ACPI_POWER_DEVICE_NAME "Power Resource" #define ACPI_POWER_FILE_INFO "info" diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f8034c..105e0ff83848 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -59,7 +59,6 @@ #include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_DEVICE_NAME "Processor" #define ACPI_PROCESSOR_FILE_INFO "info" diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 81b40ed5379e..5f8d746a9b81 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -59,7 +59,6 @@ #include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_idle"); diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index dbcf260ea93f..0d7b772bef50 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -44,9 +44,9 @@ #endif #include +#include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_FILE_PERFORMANCE "performance" #define _COMPONENT ACPI_PROCESSOR_COMPONENT diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index ef34b18f95ca..b1eb376fae45 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -40,7 +40,6 @@ #include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_thermal"); diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 3da2df93d924..a0c38c94a8a0 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -38,9 +38,9 @@ #include #include +#include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_throttling"); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index ad6cae938f0b..a6da1d9918c7 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -47,7 +47,6 @@ #include #include -#define ACPI_THERMAL_COMPONENT 0x04000000 #define ACPI_THERMAL_CLASS "thermal_zone" #define ACPI_THERMAL_DEVICE_NAME "Thermal Zone" #define ACPI_THERMAL_FILE_STATE "state" diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index bf0c26a7368d..a3aad30d39f6 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -41,7 +41,6 @@ #include #include -#define ACPI_VIDEO_COMPONENT 0x08000000 #define ACPI_VIDEO_CLASS "video" #define ACPI_VIDEO_BUS_NAME "Video Bus" #define ACPI_VIDEO_DEVICE_NAME "Video Device" diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index b3c40dc9d6ba..8778a3a00bcb 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -32,7 +32,19 @@ #define ACPI_MAX_STRING 80 #define ACPI_BUS_COMPONENT 0x00010000 +#define ACPI_AC_COMPONENT 0x00020000 +#define ACPI_BATTERY_COMPONENT 0x00040000 +#define ACPI_BUTTON_COMPONENT 0x00080000 +#define ACPI_SBS_COMPONENT 0x00080000 +#define ACPI_FAN_COMPONENT 0x00200000 +#define ACPI_PCI_COMPONENT 0x00400000 +#define ACPI_POWER_COMPONENT 0x00800000 +#define ACPI_CONTAINER_COMPONENT 0x01000000 +#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_SYSTEM_COMPONENT 0x02000000 +#define ACPI_THERMAL_COMPONENT 0x04000000 +#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000 +#define ACPI_VIDEO_COMPONENT 0x08000000 /* * _HID definitions @@ -54,7 +66,6 @@ PCI -------------------------------------------------------------------------- */ -#define ACPI_PCI_COMPONENT 0x00400000 /* ACPI PCI Interrupt Link (pci_link.c) */ -- cgit v1.2.3 From 44342f9e8dfbe8c0fadf940bf6b5c2eaaffe6850 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:57:50 -0700 Subject: ACPI: fix conflicting component definitions Some of the component definitions that were previous scattered around the drivers conflict with each other. That doesn't hurt anything except that setting one bit in the debug_layer mask would turn on debugging in two different modules. This patch fixes the conflicts. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- include/acpi/acpi_drivers.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 8778a3a00bcb..414a6ccdc042 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -35,16 +35,16 @@ #define ACPI_AC_COMPONENT 0x00020000 #define ACPI_BATTERY_COMPONENT 0x00040000 #define ACPI_BUTTON_COMPONENT 0x00080000 -#define ACPI_SBS_COMPONENT 0x00080000 +#define ACPI_SBS_COMPONENT 0x00100000 #define ACPI_FAN_COMPONENT 0x00200000 #define ACPI_PCI_COMPONENT 0x00400000 #define ACPI_POWER_COMPONENT 0x00800000 #define ACPI_CONTAINER_COMPONENT 0x01000000 -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_SYSTEM_COMPONENT 0x02000000 #define ACPI_THERMAL_COMPONENT 0x04000000 #define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000 -#define ACPI_VIDEO_COMPONENT 0x08000000 +#define ACPI_VIDEO_COMPONENT 0x10000000 +#define ACPI_PROCESSOR_COMPONENT 0x20000000 /* * _HID definitions -- cgit v1.2.3 From bdd7279919f682da8752fb47784a1ee302f8b7ea Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:57:55 -0700 Subject: ACPI: add driver component definitions to sysfs debug_layers /sys/module/acpi/parameters/debug_layers used to contain only the debug layers defined by the ACPI CA. This patch adds the additional layer definitions for ACPI drivers. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/debug.c | 15 +++++++++++++++ include/acpi/acpi_drivers.h | 4 ++++ 2 files changed, 19 insertions(+) diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c index abf36b4b1d1d..c48396892008 100644 --- a/drivers/acpi/debug.c +++ b/drivers/acpi/debug.c @@ -44,6 +44,21 @@ static const struct acpi_dlayer acpi_debug_layers[] = { ACPI_DEBUG_INIT(ACPI_CA_DISASSEMBLER), ACPI_DEBUG_INIT(ACPI_COMPILER), ACPI_DEBUG_INIT(ACPI_TOOLS), + + ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT), + ACPI_DEBUG_INIT(ACPI_AC_COMPONENT), + ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT), + ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT), + ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT), + ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT), + ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT), + ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT), + ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT), + ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT), + ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT), + ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT), + ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT), + ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT), }; static const struct acpi_dlevel acpi_debug_levels[] = { diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 414a6ccdc042..e6e90208147b 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -31,6 +31,10 @@ #define ACPI_MAX_STRING 80 +/* + * Please update drivers/acpi/debug.c and Documentation/acpi/debug.txt + * if you add to this list. + */ #define ACPI_BUS_COMPONENT 0x00010000 #define ACPI_AC_COMPONENT 0x00020000 #define ACPI_BATTERY_COMPONENT 0x00040000 -- cgit v1.2.3 From 87b586088ef953c602680e5aff8ab83a2e299498 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:58:00 -0700 Subject: ACPI: turn off all debug output by default When CONFIG_ACPI_DEBUG=y, the default acpi_dbg_layer and acpi_dbg_level values built into the ACPI CA have some debug output enabled. We'd rather be quiet unless the user actually specified the acpi.debug_level argument. This enables distros to ship with CONFIG_ACPI_DEBUG=y without inundating users with debug output. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/bus.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 765fd1c56cd6..7edf6d913c13 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -688,6 +688,14 @@ void __init acpi_early_init(void) if (acpi_disabled) return; + /* + * ACPI CA initializes acpi_dbg_level to non-zero, which means + * we get debug output merely by turning on CONFIG_ACPI_DEBUG. + * Turn it off so we don't get output unless the user specifies + * acpi.debug_level. + */ + acpi_dbg_level = 0; + printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); /* enable workarounds, unless strict ACPI spec. compliance */ -- cgit v1.2.3 From a0d84a92df43b7206b9c1330a2cccf109cf0a41a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:58:05 -0700 Subject: ACPI: update debug parameter documentation Reformat acpi.debug_layer and acpi.debug_level documentation so it's more readable, add some clues about how to figure out the mask bits that enable a specific ACPI_DEBUG_PRINT statement, and include some useful examples. Move the list of masks to Documentation/acpi/debug.txt (these are copies of the authoritative values in acoutput.h and acpi_drivers.h). Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- Documentation/acpi/debug.txt | 148 ++++++++++++++++++++++++++++++++++++ Documentation/kernel-parameters.txt | 75 ++++++------------ drivers/acpi/Kconfig | 10 ++- 3 files changed, 178 insertions(+), 55 deletions(-) create mode 100644 Documentation/acpi/debug.txt diff --git a/Documentation/acpi/debug.txt b/Documentation/acpi/debug.txt new file mode 100644 index 000000000000..65bf47c46b6d --- /dev/null +++ b/Documentation/acpi/debug.txt @@ -0,0 +1,148 @@ + ACPI Debug Output + + +The ACPI CA, the Linux ACPI core, and some ACPI drivers can generate debug +output. This document describes how to use this facility. + +Compile-time configuration +-------------------------- + +ACPI debug output is globally enabled by CONFIG_ACPI_DEBUG. If this config +option is turned off, the debug messages are not even built into the +kernel. + +Boot- and run-time configuration +-------------------------------- + +When CONFIG_ACPI_DEBUG=y, you can select the component and level of messages +you're interested in. At boot-time, use the acpi.debug_layer and +acpi.debug_level kernel command line options. After boot, you can use the +debug_layer and debug_level files in /sys/module/acpi/parameters/ to control +the debug messages. + +debug_layer (component) +----------------------- + +The "debug_layer" is a mask that selects components of interest, e.g., a +specific driver or part of the ACPI interpreter. To build the debug_layer +bitmask, look for the "#define _COMPONENT" in an ACPI source file. + +You can set the debug_layer mask at boot-time using the acpi.debug_layer +command line argument, and you can change it after boot by writing values +to /sys/module/acpi/parameters/debug_layer. + +The possible components are defined in include/acpi/acoutput.h and +include/acpi/acpi_drivers.h. Reading /sys/module/acpi/parameters/debug_layer +shows the supported mask values, currently these: + + ACPI_UTILITIES 0x00000001 + ACPI_HARDWARE 0x00000002 + ACPI_EVENTS 0x00000004 + ACPI_TABLES 0x00000008 + ACPI_NAMESPACE 0x00000010 + ACPI_PARSER 0x00000020 + ACPI_DISPATCHER 0x00000040 + ACPI_EXECUTER 0x00000080 + ACPI_RESOURCES 0x00000100 + ACPI_CA_DEBUGGER 0x00000200 + ACPI_OS_SERVICES 0x00000400 + ACPI_CA_DISASSEMBLER 0x00000800 + ACPI_COMPILER 0x00001000 + ACPI_TOOLS 0x00002000 + ACPI_BUS_COMPONENT 0x00010000 + ACPI_AC_COMPONENT 0x00020000 + ACPI_BATTERY_COMPONENT 0x00040000 + ACPI_BUTTON_COMPONENT 0x00080000 + ACPI_SBS_COMPONENT 0x00100000 + ACPI_FAN_COMPONENT 0x00200000 + ACPI_PCI_COMPONENT 0x00400000 + ACPI_POWER_COMPONENT 0x00800000 + ACPI_CONTAINER_COMPONENT 0x01000000 + ACPI_SYSTEM_COMPONENT 0x02000000 + ACPI_THERMAL_COMPONENT 0x04000000 + ACPI_MEMORY_DEVICE_COMPONENT 0x08000000 + ACPI_VIDEO_COMPONENT 0x10000000 + ACPI_PROCESSOR_COMPONENT 0x20000000 + +debug_level +----------- + +The "debug_level" is a mask that selects different types of messages, e.g., +those related to initialization, method execution, informational messages, etc. +To build debug_level, look at the level specified in an ACPI_DEBUG_PRINT() +statement. + +The ACPI interpreter uses several different levels, but the Linux +ACPI core and ACPI drivers generally only use ACPI_LV_INFO. + +You can set the debug_level mask at boot-time using the acpi.debug_level +command line argument, and you can change it after boot by writing values +to /sys/module/acpi/parameters/debug_level. + +The possible levels are defined in include/acpi/acoutput.h. Reading +/sys/module/acpi/parameters/debug_level shows the supported mask values, +currently these: + + ACPI_LV_INIT 0x00000001 + ACPI_LV_DEBUG_OBJECT 0x00000002 + ACPI_LV_INFO 0x00000004 + ACPI_LV_INIT_NAMES 0x00000020 + ACPI_LV_PARSE 0x00000040 + ACPI_LV_LOAD 0x00000080 + ACPI_LV_DISPATCH 0x00000100 + ACPI_LV_EXEC 0x00000200 + ACPI_LV_NAMES 0x00000400 + ACPI_LV_OPREGION 0x00000800 + ACPI_LV_BFIELD 0x00001000 + ACPI_LV_TABLES 0x00002000 + ACPI_LV_VALUES 0x00004000 + ACPI_LV_OBJECTS 0x00008000 + ACPI_LV_RESOURCES 0x00010000 + ACPI_LV_USER_REQUESTS 0x00020000 + ACPI_LV_PACKAGE 0x00040000 + ACPI_LV_ALLOCATIONS 0x00100000 + ACPI_LV_FUNCTIONS 0x00200000 + ACPI_LV_OPTIMIZATIONS 0x00400000 + ACPI_LV_MUTEX 0x01000000 + ACPI_LV_THREADS 0x02000000 + ACPI_LV_IO 0x04000000 + ACPI_LV_INTERRUPTS 0x08000000 + ACPI_LV_AML_DISASSEMBLE 0x10000000 + ACPI_LV_VERBOSE_INFO 0x20000000 + ACPI_LV_FULL_TABLES 0x40000000 + ACPI_LV_EVENTS 0x80000000 + +Examples +-------- + +For example, drivers/acpi/bus.c contains this: + + #define _COMPONENT ACPI_BUS_COMPONENT + ... + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device insertion detected\n")); + +To turn on this message, set the ACPI_BUS_COMPONENT bit in acpi.debug_layer +and the ACPI_LV_INFO bit in acpi.debug_level. (The ACPI_DEBUG_PRINT +statement uses ACPI_DB_INFO, which is macro based on the ACPI_LV_INFO +definition.) + +Enable all AML "Debug" output (stores to the Debug object while interpreting +AML) during boot: + + acpi.debug_layer=0xffffffff acpi.debug_level=0x2 + +Enable PCI and PCI interrupt routing debug messages: + + acpi.debug_layer=0x400000 acpi.debug_level=0x4 + +Enable all ACPI hardware-related messages: + + acpi.debug_layer=0x2 acpi.debug_level=0xffffffff + +Enable all ACPI_DB_INFO messages after boot: + + # echo 0x4 > /sys/module/acpi/parameters/debug_level + +Show all valid component values: + + # cat /sys/module/acpi/parameters/debug_layer diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 343e0f0f84b6..e8951118deaf 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -198,59 +198,30 @@ and is between 256 and 4096 characters. It is defined in the file that require a timer override, but don't have HPET - acpi.debug_layer= [HW,ACPI] + acpi.debug_layer= [HW,ACPI,ACPI_DEBUG] + acpi.debug_level= [HW,ACPI,ACPI_DEBUG] Format: - Each bit of the indicates an ACPI debug layer, - 1: enable, 0: disable. It is useful for boot time - debugging. After system has booted up, it can be set - via /sys/module/acpi/parameters/debug_layer. - CONFIG_ACPI_DEBUG must be enabled for this to produce any output. - Available bits (add the numbers together) to enable debug output - for specific parts of the ACPI subsystem: - 0x01 utilities 0x02 hardware 0x04 events 0x08 tables - 0x10 namespace 0x20 parser 0x40 dispatcher - 0x80 executer 0x100 resources 0x200 acpica debugger - 0x400 os services 0x800 acpica disassembler. - The number can be in decimal or prefixed with 0x in hex. - Warning: Many of these options can produce a lot of - output and make your system unusable. Be very careful. - - acpi.debug_level= [HW,ACPI] - Format: - Each bit of the indicates an ACPI debug level, - which corresponds to the level in an ACPI_DEBUG_PRINT - statement. After system has booted up, this mask - can be set via /sys/module/acpi/parameters/debug_level. - - CONFIG_ACPI_DEBUG must be enabled for this to produce - any output. The number can be in decimal or prefixed - with 0x in hex. Some of these options produce so much - output that the system is unusable. - - The following global components are defined by the - ACPI CA: - 0x01 error - 0x02 warn - 0x04 init - 0x08 debug object - 0x10 info - 0x20 init names - 0x40 parse - 0x80 load - 0x100 dispatch - 0x200 execute - 0x400 names - 0x800 operation region - 0x1000 bfield - 0x2000 tables - 0x4000 values - 0x8000 objects - 0x10000 resources - 0x20000 user requests - 0x40000 package - The number can be in decimal or prefixed with 0x in hex. - Warning: Many of these options can produce a lot of - output and make your system unusable. Be very careful. + CONFIG_ACPI_DEBUG must be enabled to produce any ACPI + debug output. Bits in debug_layer correspond to a + _COMPONENT in an ACPI source file, e.g., + #define _COMPONENT ACPI_PCI_COMPONENT + Bits in debug_level correspond to a level in + ACPI_DEBUG_PRINT statements, e.g., + ACPI_DEBUG_PRINT((ACPI_DB_INFO, ... + See Documentation/acpi/debug.txt for more information + about debug layers and levels. + + Enable AML "Debug" output, i.e., stores to the Debug + object while interpreting AML: + acpi.debug_layer=0xffffffff acpi.debug_level=0x2 + Enable PCI/PCI interrupt routing info messages: + acpi.debug_layer=0x400000 acpi.debug_level=0x4 + Enable all messages related to ACPI hardware: + acpi.debug_layer=0x2 acpi.debug_level=0xffffffff + + Some values produce so much output that the system is + unusable. The "log_buf_len" parameter may be useful + if you need to capture more output. acpi.power_nocheck= [HW,ACPI] Format: 1/0 enable/disable the check of power state. diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 90cb2a823b56..b0243fd55ac0 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -312,9 +312,13 @@ config ACPI_DEBUG bool "Debug Statements" default n help - The ACPI driver can optionally report errors with a great deal - of verbosity. Saying Y enables these statements. This will increase - your kernel size by around 50K. + The ACPI subsystem can produce debug output. Saying Y enables this + output and increases the kernel size by around 50K. + + Use the acpi.debug_layer and acpi.debug_level kernel command-line + parameters documented in Documentation/acpi/debug.txt and + Documentation/kernel-parameters.txt to control the type and + amount of debug output. config ACPI_DEBUG_FUNC_TRACE bool "Additionally enable ACPI function tracing" -- cgit v1.2.3 From a1a8d334f9e8c89a15bba8f34e443a37c29079c3 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 31 Jul 2008 23:02:28 +0200 Subject: Delete an unwanted return statement at evgpe.c Len's tree branch release-2.6.27, found an unwanted return statement at evgpe.c. (git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 release-2.6.27) Signed-of-by Lin Ming Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/acpi/events/evgpe.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index c5e53aae86f7..f45c74fe745e 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -289,8 +289,6 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) */ status = acpi_hw_low_disable_gpe(gpe_event_info); return_ACPI_STATUS(status); - - return_ACPI_STATUS(AE_OK); } /******************************************************************************* -- cgit v1.2.3 From 22c13f9d8179f4c9caecfcb60a95214562b9addc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:54 +0200 Subject: ACPI: video: Ignore devices that aren't present in hardware This is a reimplemention of commit 0119509c4fbc9adcef1472817fda295334612976 from Matthew Garrett This patch got removed because of a regression: ThinkPads with a Intel graphics card and an Integrated Graphics Device BIOS implementation stopped working. In fact, they only worked because the ACPI device of the discrete, the wrong one, got used (via int10). So ACPI functions were poking on the wrong hardware used which is a sever bug. The next patch provides support for above ThinkPads to be able to switch brightness via the legacy thinkpad_acpi driver and automatically detect when to use it. Original commit message from Matthew Garrett: Vendors often ship machines with a choice of integrated or discrete graphics, and use the same DSDT for both. As a result, the ACPI video module will locate devices that may not exist on this specific platform. Attempt to determine whether the device exists or not, and abort the device creation if it doesn't. http://bugzilla.kernel.org/show_bug.cgi?id=9614 Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/acpi/glue.c | 40 ++++++++++++++++++++++++++++++++++++++++ drivers/acpi/video.c | 7 ++++++- include/acpi/acpi_bus.h | 2 ++ 3 files changed, 48 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 24649ada08df..adec3d15810a 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -140,6 +140,46 @@ struct device *acpi_get_physical_device(acpi_handle handle) EXPORT_SYMBOL(acpi_get_physical_device); +/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge + * This should work in general, but did not on a Lenovo T61 for the + * graphics card. But this must be fixed when the PCI device is + * bound and the kernel device struct is attached to the acpi device + * Note: A success call will increase reference count by one + * Do call put_device(dev) on the returned device then + */ +struct device *acpi_get_physical_pci_device(acpi_handle handle) +{ + struct device *dev; + long long device_id; + acpi_status status; + + status = + acpi_evaluate_integer(handle, "_ADR", NULL, &device_id); + + if (ACPI_FAILURE(status)) + return NULL; + + /* We need to attempt to determine whether the _ADR refers to a + PCI device or not. There's no terribly good way to do this, + so the best we can hope for is to assume that there'll never + be a device in the host bridge */ + if (device_id >= 0x10000) { + /* It looks like a PCI device. Does it exist? */ + dev = acpi_get_physical_device(handle); + } else { + /* It doesn't look like a PCI device. Does its parent + exist? */ + acpi_handle phandle; + if (acpi_get_parent(handle, &phandle)) + return NULL; + dev = acpi_get_physical_device(phandle); + } + if (!dev) + return NULL; + return dev; +} +EXPORT_SYMBOL(acpi_get_physical_pci_device); + static int acpi_bind_one(struct device *dev, acpi_handle handle) { struct acpi_device *acpi_dev; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a29b0ccac65a..6597c2a37c36 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -842,11 +842,16 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) static int acpi_video_bus_check(struct acpi_video_bus *video) { acpi_status status = -ENOENT; - + struct device *dev; if (!video) return -EINVAL; + dev = acpi_get_physical_pci_device(video->device->handle); + if (!dev) + return -ENODEV; + put_device(dev); + /* Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 54a279e44c9a..e9f6574930ef 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -380,6 +380,8 @@ struct acpi_bus_type { int register_acpi_bus_type(struct acpi_bus_type *); int unregister_acpi_bus_type(struct acpi_bus_type *); struct device *acpi_get_physical_device(acpi_handle); +struct device *acpi_get_physical_pci_device(acpi_handle); + /* helper */ acpi_handle acpi_get_child(acpi_handle, acpi_integer); acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); -- cgit v1.2.3 From c3d6de698c84efdbdd3781b7058bcc339ab43da8 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:55 +0200 Subject: ACPI video: if no ACPI backlight support, use vendor drivers If an ACPI graphics device supports backlight brightness functions (cmp. with latest ACPI spec Appendix B), let the ACPI video driver control backlight and switch backlight control off in vendor specific ACPI drivers (asus_acpi, thinkpad_acpi, eeepc, fujitsu_laptop, msi_laptop, sony_laptop, acer-wmi). Currently it is possible to load above drivers and let both poke on the brightness HW registers, the video and vendor specific ACPI drivers -> bad. This patch provides the basic support to check for BIOS capabilities before driver loading time. Driver specific modifications are in separate follow up patches. "acpi_backlight=vendor" Prever vendor driver over ACPI driver for backlight. "acpi_backlight=video" (default) Prever ACPI driver over vendor driver for backlight. Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- Documentation/kernel-parameters.txt | 12 ++ drivers/acpi/Makefile | 4 + drivers/acpi/scan.c | 32 +---- drivers/acpi/video.c | 28 ++-- drivers/acpi/video_detect.c | 268 ++++++++++++++++++++++++++++++++++++ include/linux/acpi.h | 44 ++++++ 6 files changed, 345 insertions(+), 43 deletions(-) create mode 100644 drivers/acpi/video_detect.c diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c86c07459712..dd5013f974d8 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -198,6 +198,18 @@ and is between 256 and 4096 characters. It is defined in the file that require a timer override, but don't have HPET + acpi_backlight= [HW,ACPI] + acpi_backlight=vendor + acpi_backlight=video + If set to vendor, prefer vendor specific driver + (e.g. thinkpad_acpi, sony_acpi, etc.) instead + of the ACPI video.ko driver. + + acpi_display_output= [HW,ACPI] + acpi_display_output=vendor + acpi_display_output=video + See above. + acpi.debug_layer= [HW,ACPI] Format: Each bit of the indicates an ACPI debug layer, diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d91c027ece8f..c03810aa19c0 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -46,6 +46,10 @@ obj-$(CONFIG_ACPI_BUTTON) += button.o obj-$(CONFIG_ACPI_FAN) += fan.o obj-$(CONFIG_ACPI_DOCK) += dock.o obj-$(CONFIG_ACPI_VIDEO) += video.o +ifdef CONFIG_ACPI_VIDEO +obj-y += video_detect.o +endif + obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e0f9f9..556b182001ca 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -919,36 +919,6 @@ static void acpi_device_get_busid(struct acpi_device *device, } } -static int -acpi_video_bus_match(struct acpi_device *device) -{ - acpi_handle h_dummy; - - if (!device) - return -EINVAL; - - /* Since there is no HID, CID for ACPI Video drivers, we have - * to check well known required nodes for each feature we support. - */ - - /* Does this device able to support video switching ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) - return 0; - - /* Does this device able to retrieve a video ROM ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) - return 0; - - /* Does this device able to configure which video head to be POSTed ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) - return 0; - - return -ENODEV; -} - /* * acpi_bay_match - see if a device is an ejectable driver bay * @@ -1031,7 +1001,7 @@ static void acpi_device_set_id(struct acpi_device *device, will get autoloaded and the device might still match against another driver. */ - if (ACPI_SUCCESS(acpi_video_bus_match(device))) + if (acpi_is_video_device(device)) cid_add = ACPI_VIDEO_HID; else if (ACPI_SUCCESS(acpi_bay_match(device))) cid_add = ACPI_BAY_HID; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 6597c2a37c36..2097c399dd06 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -739,7 +739,8 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->cap._DSS = 1; } - max_level = acpi_video_init_brightness(device); + if (acpi_video_backlight_support()) + max_level = acpi_video_init_brightness(device); if (device->cap._BCL && device->cap._BCM && max_level > 0) { int result; @@ -785,18 +786,21 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) printk(KERN_ERR PREFIX "Create sysfs link\n"); } - if (device->cap._DCS && device->cap._DSS){ - static int count = 0; - char *name; - name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); - if (!name) - return; - sprintf(name, "acpi_video%d", count++); - device->output_dev = video_output_register(name, - NULL, device, &acpi_output_properties); - kfree(name); + + if (acpi_video_display_switch_support()) { + + if (device->cap._DCS && device->cap._DSS) { + static int count; + char *name; + name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); + if (!name) + return; + sprintf(name, "acpi_video%d", count++); + device->output_dev = video_output_register(name, + NULL, device, &acpi_output_properties); + kfree(name); + } } - return; } /* diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c new file mode 100644 index 000000000000..70b1e91ae2ab --- /dev/null +++ b/drivers/acpi/video_detect.c @@ -0,0 +1,268 @@ +/* + * Copyright (C) 2008 SuSE Linux Products GmbH + * Thomas Renninger + * + * May be copied or modified under the terms of the GNU General Public License + * + * video_detect.c: + * Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c + * There a Linux specific (Spec does not provide a HID for video devices) is + * assinged + * + * After PCI devices are glued with ACPI devices + * acpi_get_physical_pci_device() can be called to identify ACPI graphics + * devices for which a real graphics card is plugged in + * + * Now acpi_video_get_capabilities() can be called to check which + * capabilities the graphics cards plugged in support. The check for general + * video capabilities will be triggered by the first caller of + * acpi_video_get_capabilities(NULL); which will happen when the first + * backlight (or display output) switching supporting driver calls: + * acpi_video_backlight_support(); + * + * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B) + * are available, video.ko should be used to handle the device. + * + * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi, + * sony_acpi,... can take care about backlight brightness and display output + * switching. + * + * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) + * this file will not be compiled, acpi_video_get_capabilities() and + * acpi_video_backlight_support() will always return 0 and vendor specific + * drivers always can handle backlight. + * + */ + +#include +#include + +ACPI_MODULE_NAME("video"); +#define ACPI_VIDEO_COMPONENT 0x08000000 +#define _COMPONENT ACPI_VIDEO_COMPONENT + +static long acpi_video_support; +static bool acpi_video_caps_checked; + +static acpi_status +acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context, + void **retyurn_value) +{ + long *cap = context; + acpi_handle h_dummy; + + if (ACPI_SUCCESS(acpi_get_handle(handle, "_BCM", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(handle, "_BCL", &h_dummy))) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight " + "support\n")); + *cap |= ACPI_VIDEO_BACKLIGHT; + /* We have backlight support, no need to scan further */ + return AE_CTRL_TERMINATE; + } + return 0; +} + +/* Returns true if the device is a video device which can be handled by + * video.ko. + * The device will get a Linux specific CID added in scan.c to + * identify the device as an ACPI graphics device + * Be aware that the graphics device may not be physically present + * Use acpi_video_get_capabilities() to detect general ACPI video + * capabilities of present cards + */ +long acpi_is_video_device(struct acpi_device *device) +{ + acpi_handle h_dummy; + long video_caps = 0; + + if (!device) + return 0; + + /* Does this device able to support video switching ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) + video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING; + + /* Does this device able to retrieve a video ROM ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) + video_caps |= ACPI_VIDEO_ROM_AVAILABLE; + + /* Does this device able to configure which video head to be POSTed ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) + video_caps |= ACPI_VIDEO_DEVICE_POSTING; + + /* Only check for backlight functionality if one of the above hit. */ + if (video_caps) + acpi_walk_namespace(ACPI_TYPE_DEVICE, device->handle, + ACPI_UINT32_MAX, acpi_backlight_cap_match, + &video_caps, NULL); + + return video_caps; +} +EXPORT_SYMBOL(acpi_is_video_device); + +static acpi_status +find_video(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + long *cap = context; + struct device *dev; + struct acpi_device *acpi_dev; + + const struct acpi_device_id video_ids[] = { + {ACPI_VIDEO_HID, 0}, + {"", 0}, + }; + if (acpi_bus_get_device(handle, &acpi_dev)) + return AE_OK; + + if (!acpi_match_device_ids(acpi_dev, video_ids)) { + dev = acpi_get_physical_pci_device(handle); + if (!dev) + return AE_OK; + put_device(dev); + *cap |= acpi_is_video_device(acpi_dev); + } + return AE_OK; +} + +/* + * Returns the video capabilities of a specific ACPI graphics device + * + * if NULL is passed as argument all ACPI devices are enumerated and + * all graphics capabilities of physically present devices are + * summerized and returned. This is cached and done only once. + */ +long acpi_video_get_capabilities(acpi_handle graphics_handle) +{ + long caps = 0; + struct acpi_device *tmp_dev; + acpi_status status; + + if (acpi_video_caps_checked && graphics_handle == NULL) + return acpi_video_support; + + if (!graphics_handle) { + /* Only do the global walk through all graphics devices once */ + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, find_video, + &caps, NULL); + /* There might be boot param flags set already... */ + acpi_video_support |= caps; + acpi_video_caps_checked = 1; + /* Add blacklists here. Be careful to use the right *DMI* bits + * to still be able to override logic via boot params, e.g.: + * + * if (dmi_name_in_vendors("XY")) { + * acpi_video_support |= + * ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR; + * acpi_video_support |= + * ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; + *} + */ + } else { + status = acpi_bus_get_device(graphics_handle, &tmp_dev); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Invalid device")); + return 0; + } + acpi_walk_namespace(ACPI_TYPE_DEVICE, graphics_handle, + ACPI_UINT32_MAX, find_video, + &caps, NULL); + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "We have 0x%lX video support %s %s\n", + graphics_handle ? caps : acpi_video_support, + graphics_handle ? "on device " : "in general", + graphics_handle ? acpi_device_bid(tmp_dev) : "")); + return caps; +} +EXPORT_SYMBOL(acpi_video_get_capabilities); + +/* Returns true if video.ko can do backlight switching */ +int acpi_video_backlight_support(void) +{ + /* + * We must check whether the ACPI graphics device is physically plugged + * in. Therefore this must be called after binding PCI and ACPI devices + */ + if (!acpi_video_caps_checked) + acpi_video_get_capabilities(NULL); + + /* First check for boot param -> highest prio */ + if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO) + return 1; + + /* Then check for DMI blacklist -> second highest prio */ + if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VIDEO) + return 1; + + /* Then go the default way */ + return acpi_video_support & ACPI_VIDEO_BACKLIGHT; +} +EXPORT_SYMBOL(acpi_video_backlight_support); + +/* + * Returns true if video.ko can do display output switching. + * This does not work well/at all with binary graphics drivers + * which disable system io ranges and do it on their own. + */ +int acpi_video_display_switch_support(void) +{ + if (!acpi_video_caps_checked) + acpi_video_get_capabilities(NULL); + + if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO) + return 1; + + if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO) + return 1; + + return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING; +} +EXPORT_SYMBOL(acpi_video_display_switch_support); + +/* + * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video + * To force that backlight or display output switching is processed by vendor + * specific acpi drivers or video.ko driver. + */ +int __init acpi_backlight(char *str) +{ + if (str == NULL || *str == '\0') + return 1; + else { + if (!strcmp("vendor", str)) + acpi_video_support |= + ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR; + if (!strcmp("video", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; + } + return 1; +} +__setup("acpi_backlight=", acpi_backlight); + +int __init acpi_display_output(char *str) +{ + if (str == NULL || *str == '\0') + return 1; + else { + if (!strcmp("vendor", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR; + if (!strcmp("video", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; + } + return 1; +} +__setup("acpi_display_output=", acpi_display_output); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index fd6a452b0ceb..7f23761ace35 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -194,6 +194,50 @@ extern bool wmi_has_guid(const char *guid); #endif /* CONFIG_ACPI_WMI */ +#define ACPI_VIDEO_OUTPUT_SWITCHING 0x0001 +#define ACPI_VIDEO_DEVICE_POSTING 0x0002 +#define ACPI_VIDEO_ROM_AVAILABLE 0x0004 +#define ACPI_VIDEO_BACKLIGHT 0x0008 +#define ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR 0x0010 +#define ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO 0x0020 +#define ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR 0x0040 +#define ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO 0x0080 +#define ACPI_VIDEO_BACKLIGHT_DMI_VENDOR 0x0100 +#define ACPI_VIDEO_BACKLIGHT_DMI_VIDEO 0x0200 +#define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR 0x0400 +#define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO 0x0800 + +#if defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) + +extern long acpi_video_get_capabilities(acpi_handle graphics_dev_handle); +extern long acpi_is_video_device(struct acpi_device *device); +extern int acpi_video_backlight_support(void); +extern int acpi_video_display_switch_support(void); + +#else + +static inline long acpi_video_get_capabilities(acpi_handle graphics_dev_handle) +{ + return 0; +} + +static inline long acpi_is_video_device(struct acpi_device *device) +{ + return 0; +} + +static inline int acpi_video_backlight_support(void) +{ + return 0; +} + +static inline int acpi_video_display_switch_support(void) +{ + return 0; +} + +#endif /* defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) */ + extern int acpi_blacklisted(void); #ifdef CONFIG_DMI extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d); -- cgit v1.2.3 From febf2d95a71cd594182e4b3defb0e0ffdfe61482 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:56 +0200 Subject: Acer-WMI: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Acked-by: Carlos Corbacho Signed-off-by: Len Brown --- drivers/misc/acer-wmi.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index 0532a2de2ce4..94c9f911824e 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -1297,6 +1297,12 @@ static int __init acer_wmi_init(void) set_quirks(); + if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) { + interface->capability &= ~ACER_CAP_BRIGHTNESS; + printk(ACER_INFO "Brightness must be controlled by " + "generic video driver\n"); + } + if (platform_driver_register(&acer_platform_driver)) { printk(ACER_ERR "Unable to register platform driver.\n"); goto error_platform_register; -- cgit v1.2.3 From 6766fec3669d5053b987e111afb348b885237bfc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:57 +0200 Subject: asus-acpi: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/asus-laptop.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index a9d5228724a6..8fb8b3591048 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -1208,9 +1208,13 @@ static int __init asus_laptop_init(void) dev = acpi_get_physical_device(hotk->device->handle); - result = asus_backlight_init(dev); - if (result) - goto fail_backlight; + if (!acpi_video_backlight_support()) { + result = asus_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(ASUS_INFO "Brightness ignored, must be controlled by " + "ACPI video driver\n"); result = asus_led_init(dev); if (result) -- cgit v1.2.3 From 29454f17124c655236d2972dad21907e15ca294b Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:58 +0200 Subject: compal: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/compal-laptop.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/misc/compal-laptop.c b/drivers/misc/compal-laptop.c index 344b790a6253..11003bba10d3 100644 --- a/drivers/misc/compal-laptop.c +++ b/drivers/misc/compal-laptop.c @@ -326,12 +326,14 @@ static int __init compal_init(void) /* Register backlight stuff */ - compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, - &compalbl_ops); - if (IS_ERR(compalbl_device)) - return PTR_ERR(compalbl_device); + if (!acpi_video_backlight_support()) { + compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, + &compalbl_ops); + if (IS_ERR(compalbl_device)) + return PTR_ERR(compalbl_device); - compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + } ret = platform_driver_register(&compal_driver); if (ret) -- cgit v1.2.3 From a2bf8c01048f855fbf65a8fc41460aef71ca39dc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:59 +0200 Subject: eeepc-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/eeepc-laptop.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c index 9ef98b2d5039..02fe2b8b8939 100644 --- a/drivers/misc/eeepc-laptop.c +++ b/drivers/misc/eeepc-laptop.c @@ -825,9 +825,15 @@ static int __init eeepc_laptop_init(void) return -ENODEV; } dev = acpi_get_physical_device(ehotk->device->handle); - result = eeepc_backlight_init(dev); - if (result) - goto fail_backlight; + + if (!acpi_video_backlight_support()) { + result = eeepc_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(EEEPC_INFO "Backlight controlled by ACPI video " + "driver\n"); + result = eeepc_hwmon_init(dev); if (result) goto fail_hwmon; -- cgit v1.2.3 From 7d5c89a615c5dae039094a3cf4a56fe6aab81765 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:00 +0200 Subject: fujitsu-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/fujitsu-laptop.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index d2cf0bfe3163..1070dc1bc18e 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -990,16 +990,16 @@ static int __init fujitsu_init(void) /* Register backlight stuff */ - fujitsu->bl_device = - backlight_device_register("fujitsu-laptop", NULL, NULL, - &fujitsubl_ops); - if (IS_ERR(fujitsu->bl_device)) - return PTR_ERR(fujitsu->bl_device); - - max_brightness = fujitsu->max_brightness; - - fujitsu->bl_device->props.max_brightness = max_brightness - 1; - fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + if (!acpi_video_backlight_support()) { + fujitsu->bl_device = + backlight_device_register("fujitsu-laptop", NULL, NULL, + &fujitsubl_ops); + if (IS_ERR(fujitsu->bl_device)) + return PTR_ERR(fujitsu->bl_device); + max_brightness = fujitsu->max_brightness; + fujitsu->bl_device->props.max_brightness = max_brightness - 1; + fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + } ret = platform_driver_register(&fujitsupf_driver); if (ret) @@ -1035,7 +1035,8 @@ fail_hotkey: fail_backlight: - backlight_device_unregister(fujitsu->bl_device); + if (fujitsu->bl_device) + backlight_device_unregister(fujitsu->bl_device); fail_platform_device2: @@ -1062,7 +1063,8 @@ static void __exit fujitsu_cleanup(void) &fujitsupf_attribute_group); platform_device_unregister(fujitsu->pf_device); platform_driver_unregister(&fujitsupf_driver); - backlight_device_unregister(fujitsu->bl_device); + if (fujitsu->bl_device) + backlight_device_unregister(fujitsu->bl_device); acpi_bus_unregister_driver(&acpi_fujitsu_driver); -- cgit v1.2.3 From a598c82f39892069a8f6693459b1179fd9ef30e1 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:01 +0200 Subject: msi-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/msi-laptop.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c index de898c6938f3..759763d18e4c 100644 --- a/drivers/misc/msi-laptop.c +++ b/drivers/misc/msi-laptop.c @@ -347,12 +347,16 @@ static int __init msi_init(void) /* Register backlight stuff */ - msibl_device = backlight_device_register("msi-laptop-bl", NULL, NULL, - &msibl_ops); - if (IS_ERR(msibl_device)) - return PTR_ERR(msibl_device); - - msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; + if (acpi_video_backlight_support()) { + printk(KERN_INFO "MSI: Brightness ignored, must be controlled " + "by ACPI video driver\n"); + } else { + msibl_device = backlight_device_register("msi-laptop-bl", NULL, + NULL, &msibl_ops); + if (IS_ERR(msibl_device)) + return PTR_ERR(msibl_device); + msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; + } ret = platform_driver_register(&msipf_driver); if (ret) -- cgit v1.2.3 From 540b8bb9c33935183ceb5bed466a42ad72b2af56 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:02 +0200 Subject: sony-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 06f07e19dc70..7bcb81002dcf 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1038,7 +1038,11 @@ static int sony_nc_add(struct acpi_device *device) goto outinput; } - if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) { + if (!acpi_video_backlight_support()) { + printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be " + "controlled by ACPI video driver\n"); + } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", + &handle))) { sony_backlight_device = backlight_device_register("sony", NULL, NULL, &sony_backlight_ops); -- cgit v1.2.3 From 2dba1b5d87e08a294da5cdfa4d32908000e9b085 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:03 +0200 Subject: thinkpad_acpi: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Acked-by: Henrique de Moraes Holschuh Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 4db1cf9078d9..7a4a26b0edd2 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -4932,16 +4932,25 @@ static int __init brightness_init(struct ibm_init_struct *iibm) */ b = tpacpi_check_std_acpi_brightness_support(); if (b > 0) { - if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { - printk(TPACPI_NOTICE - "Lenovo BIOS switched to ACPI backlight " - "control mode\n"); - } - if (brightness_enable > 1) { - printk(TPACPI_NOTICE - "standard ACPI backlight interface " - "available, not loading native one...\n"); - return 1; + + if (acpi_video_backlight_support()) { + if (brightness_enable > 1) { + printk(TPACPI_NOTICE + "Standard ACPI backlight interface " + "available, not loading native one.\n"); + return 1; + } else if (brightness_enable == 1) { + printk(TPACPI_NOTICE + "Backlight control force enabled, even if standard " + "ACPI backlight interface is available\n"); + } + } else { + if (brightness_enable > 1) { + printk(TPACPI_NOTICE + "Standard ACPI backlight interface not " + "available, thinkpad_acpi native " + "brightness control enabled\n"); + } } } -- cgit v1.2.3 From 0c4b95455f250c7006af00208aefdf0f93f63144 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 7 Nov 2008 21:12:17 -0800 Subject: Staging: only build the tree if we really want to This Kconfig change allows the common 'make allmodconfig' and 'make allyesconfig' build options to skip the staging tree, which is probably what you want to have happen anyway. This makes the linux-next developer's life a lot easier so he doesn't have to worry about changes that break the staging tree, that's for me to worry about... Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index e1654f59eb70..0a49cd788a75 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -21,7 +21,23 @@ menuconfig STAGING If in doubt, say N here. -if STAGING + +config STAGING_EXCLUDE_BUILD + bool "Exclude Staging drivers from being built" + default y + ---help--- + Are you sure you really want to build the staging drivers? + They taint your kernel, don't live up to the normal Linux + kernel quality standards, are a bit crufty around the edges, + and might go off and kick your dog when you aren't paying + attention. + + Say N here to be able to select and build the Staging drivers. + This option is primarily here to prevent them from being built + when selecting 'make allyesconfg' and 'make allmodconfig' so + don't be all that put off, your dog will be just fine. + +if !STAGING_EXCLUDE_BUILD source "drivers/staging/et131x/Kconfig" @@ -45,4 +61,4 @@ source "drivers/staging/at76_usb/Kconfig" source "drivers/staging/poch/Kconfig" -endif # STAGING +endif # !STAGING_EXCLUDE_BUILD -- cgit v1.2.3 From b8f6ec2e61f650fd1a316a207a00965bcb8805d4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 29 Oct 2008 10:44:55 -0700 Subject: Staging: make usbip depend on CONFIG_NET Thanks to Randy Dunlap for finding this problem. Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig index 7426235ccc44..217fb7e62c2f 100644 --- a/drivers/staging/usbip/Kconfig +++ b/drivers/staging/usbip/Kconfig @@ -1,6 +1,6 @@ config USB_IP_COMMON tristate "USB IP support (EXPERIMENTAL)" - depends on USB && EXPERIMENTAL + depends on USB && NET && EXPERIMENTAL default N ---help--- This enables pushing USB packets over IP to allow remote -- cgit v1.2.3 From 0d12cdd5f883f508d33b85c1bae98fa28987c8c7 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 8 Nov 2008 16:19:55 +0100 Subject: sched: improve sched_clock() performance in scheduler-intense workloads native_read_tsc() overhead accounts for 20% of the system overhead: 659567 system_call 41222.9375 686796 schedule 435.7843 718382 __switch_to 665.1685 823875 switch_mm 4526.7857 1883122 native_read_tsc 55385.9412 9761990 total 2.8468 this is large part due to the rdtsc_barrier() that is done before and after reading the TSC. But sched_clock() is not a precise clock in the GTOD sense, using such barriers is completely pointless. So remove the barriers and only use them in vget_cycles(). This improves lat_ctx performance by about 5%. Signed-off-by: Ingo Molnar --- arch/x86/include/asm/msr.h | 2 -- arch/x86/include/asm/tsc.h | 8 +++++++- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 46be2fa7ac26..c2a812ebde89 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -108,9 +108,7 @@ static __always_inline unsigned long long __native_read_tsc(void) { DECLARE_ARGS(val, low, high); - rdtsc_barrier(); asm volatile("rdtsc" : EAX_EDX_RET(val, low, high)); - rdtsc_barrier(); return EAX_EDX_VAL(val, low, high); } diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h index 38ae163cc91b..9cd83a8e40d5 100644 --- a/arch/x86/include/asm/tsc.h +++ b/arch/x86/include/asm/tsc.h @@ -34,6 +34,8 @@ static inline cycles_t get_cycles(void) static __always_inline cycles_t vget_cycles(void) { + cycles_t cycles; + /* * We only do VDSOs on TSC capable CPUs, so this shouldnt * access boot_cpu_data (which is not VDSO-safe): @@ -42,7 +44,11 @@ static __always_inline cycles_t vget_cycles(void) if (!cpu_has_tsc) return 0; #endif - return (cycles_t)__native_read_tsc(); + rdtsc_barrier(); + cycles = (cycles_t)__native_read_tsc(); + rdtsc_barrier(); + + return cycles; } extern void tsc_init(void); -- cgit v1.2.3 From 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 8 Nov 2008 17:05:38 +0100 Subject: sched: optimize sched_clock() a bit sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling variant of __cycles_2_ns(). Most of the time sched_clock() is called with irqs disabled already. The few places that call it with irqs enabled need to be updated. Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 2ef80e301925..424093b157d3 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -55,7 +55,7 @@ u64 native_sched_clock(void) rdtscll(this_offset); /* return the value in ns */ - return cycles_2_ns(this_offset); + return __cycles_2_ns(this_offset); } /* We need to define a real function for sched_clock, to override the -- cgit v1.2.3 From c5d712433ff57a66d8fb79a57a4fc7a7c3467b97 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 8 Nov 2008 13:53:33 +0100 Subject: Fix __pfn_to_page(pfn) for CONFIG_DISCONTIGMEM=y Fix the __pfn_to_page(pfn) macro so that it doesn't evaluate its argument twice in the CONFIG_DISCONTIGMEM=y case, because 'pfn' may be a result of a funtion call having side effects. For example, the hibernation code applies pfn_to_page(pfn) to the result of a function returning the pfn corresponding to the next set bit in a bitmap and the current bit position is modified on each call. This leads to "interesting" failures for CONFIG_DISCONTIGMEM=y due to the current behavior of __pfn_to_page(pfn). Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Linus Torvalds --- include/asm-generic/memory_model.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-generic/memory_model.h b/include/asm-generic/memory_model.h index ae060c62aff1..18546d8eb78e 100644 --- a/include/asm-generic/memory_model.h +++ b/include/asm-generic/memory_model.h @@ -34,7 +34,7 @@ #define __pfn_to_page(pfn) \ ({ unsigned long __pfn = (pfn); \ - unsigned long __nid = arch_pfn_to_nid(pfn); \ + unsigned long __nid = arch_pfn_to_nid(__pfn); \ NODE_DATA(__nid)->node_mem_map + arch_local_page_offset(__pfn, __nid);\ }) -- cgit v1.2.3 From b41d6fee37e2bebd58ad3623c288197e75787905 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 4 Nov 2008 14:56:55 -0600 Subject: powerpc/fsl-booke: Fix synchronization bug w/local tlb invalidates The implemetation of _tlbil_pid() on Freescale Book-E cores needs an msync & isync after we flash invalidate the TLBs. This was causing the following oops reported by Sebastian Andrzej Siewior: VFS: Mounted root (nfs filesystem) readonly. Freeing unused kernel memory: 148k init BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/mm/mmap.c:234 in_atomic():1, irqs_disabled():0 Call Trace: [df189df0] [c0007160] show_stack+0x48/0x148 (unreliable) [df189e30] [c0029480] __might_sleep+0xf0/0x100 [df189e40] [c0070ac0] remove_vma+0x28/0x98 [df189e50] [c0070c1c] exit_mmap+0xec/0x128 [df189e80] [c002d2f4] mmput+0x54/0xec [df189ea0] [c0030b6c] exit_mm+0x10c/0x120 [df189ed0] [c003288c] do_exit+0x1ac/0x6e8 [df189f20] [c0032e48] do_group_exit+0x80/0xac [df189f40] [c000e9dc] ret_from_syscall+0x0/0x3c BUG: scheduling while atomic: udevd/956/0x10000002 Modules linked in: Call Trace: [df189df0] [c0007160] show_stack+0x48/0x148 (unreliable) [df189e30] [c002ac88] __schedule_bug+0x58/0x6c [df189e40] [c023e6cc] schedule+0xa8/0x4a8 [df189e90] [c002ad6c] __cond_resched+0x38/0x64 [df189ea0] [c023ebc8] _cond_resched+0x3c/0x58 [df189eb0] [c0030e70] put_files_struct+0x90/0xec [df189ed0] [c00328a8] do_exit+0x1c8/0x6e8 [df189f20] [c0032e48] do_group_exit+0x80/0xac [df189f40] [c000e9dc] ret_from_syscall+0x0/0x3c Signed-off-by: Kumar Gala --- arch/powerpc/kernel/misc_32.S | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 6a9b4bf0d173..bdc8b0e860e5 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -470,6 +470,8 @@ _GLOBAL(_tlbil_pid) mfspr r3,SPRN_MMUCSR0 andi. r3,r3,MMUCSR0_TLBFI@l bne 1b + msync + isync blr /* @@ -486,6 +488,8 @@ _GLOBAL(_tlbil_va) rlwinm r4,r4,0,1,31 mtspr SPRN_MAS1,r4 tlbwe + msync + isync blr #endif /* CONFIG_FSL_BOOKE */ -- cgit v1.2.3 From 0a0e9e0cb90170f95b4351597fd5c0e65fab6bc5 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Wed, 5 Nov 2008 21:53:56 +0100 Subject: powerpc: Fix Book-E watchdog timer interval setting This patch fixes the setting of the Book-E watchdog timer interval setup on initialization and by ioctl(). On initialization the period bits have to be masked before setting a new period. In WDIOC_SETTIMEOUT ioctl we have to use the correct mask. Signed-off-by: Matthias Fuchs Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- drivers/watchdog/booke_wdt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index c3b78a76f173..225398fd5049 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -42,8 +42,10 @@ u32 booke_wdt_period = WDT_PERIOD_DEFAULT; #ifdef CONFIG_FSL_BOOKE #define WDTP(x) ((((63-x)&0x3)<<30)|(((63-x)&0x3c)<<15)) +#define WDTP_MASK (WDTP(0)) #else #define WDTP(x) (TCR_WP(x)) +#define WDTP_MASK (TCR_WP_MASK) #endif static DEFINE_SPINLOCK(booke_wdt_lock); @@ -65,6 +67,7 @@ static void __booke_wdt_enable(void *data) /* clear status before enabling watchdog */ __booke_wdt_ping(NULL); val = mfspr(SPRN_TCR); + val &= ~WDTP_MASK; val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period)); mtspr(SPRN_TCR, val); @@ -114,7 +117,7 @@ static long booke_wdt_ioctl(struct file *file, case WDIOC_SETTIMEOUT: if (get_user(booke_wdt_period, p)) return -EFAULT; - mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP(0)) | + mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP_MASK) | WDTP(booke_wdt_period)); return 0; case WDIOC_GETTIMEOUT: -- cgit v1.2.3 From 33d2d78baaed06dda9f4de105388832850fb3555 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Fri, 7 Nov 2008 13:43:43 +0000 Subject: powerpc/86xx: Correct SOC bus-frequency in GE Fanuc SBC610 DTS This patch corrects the bus-frequency value provided in the SBC610's dts. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/gef_sbc610.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 6ed608322ddc..e48cfa740c8a 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -108,7 +108,7 @@ compatible = "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; reg = <0xfef00000 0x100000>; // CCSRBAR 1M - bus-frequency = <0>; + bus-frequency = <33333333>; i2c1: i2c@3000 { #address-cells = <1>; -- cgit v1.2.3 From 2b48706560cd4811654582a4a194c67a8562d602 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Sat, 8 Nov 2008 20:51:34 +0300 Subject: powerpc: Update QE/CPM2 usb_ctlr structures for USB support Fixes following build error: CC drivers/usb/gadget/fsl_qe_udc.o drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eprx_stall_change': drivers/usb/gadget/fsl_qe_udc.c:156: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c:163: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eptx_stall_change': drivers/usb/gadget/fsl_qe_udc.c:173: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c:180: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eprx_nack': drivers/usb/gadget/fsl_qe_udc.c:201: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c:201: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eprx_normal': drivers/usb/gadget/fsl_qe_udc.c:218: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c:218: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_ep_reset': drivers/usb/gadget/fsl_qe_udc.c:325: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c:342: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_ep_register_init': drivers/usb/gadget/fsl_qe_udc.c:515: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'ch9getstatus': drivers/usb/gadget/fsl_qe_udc.c:1981: error: 'struct usb_ctlr' has no member named 'usb_usep' make[2]: *** [drivers/usb/gadget/fsl_qe_udc.o] Error 1 Signed-off-by: Li Yang Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/immap_cpm2.h | 9 +++------ arch/powerpc/include/asm/immap_qe.h | 5 +---- 2 files changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h index 4080bab0468c..d4f069bf0e57 100644 --- a/arch/powerpc/include/asm/immap_cpm2.h +++ b/arch/powerpc/include/asm/immap_cpm2.h @@ -554,14 +554,11 @@ typedef struct usb_ctlr { u8 usb_usadr; u8 usb_uscom; u8 res1[1]; - u16 usb_usep1; - u16 usb_usep2; - u16 usb_usep3; - u16 usb_usep4; + __be16 usb_usep[4]; u8 res2[4]; - u16 usb_usber; + __be16 usb_usber; u8 res3[2]; - u16 usb_usbmr; + __be16 usb_usbmr; u8 usb_usbs; u8 res4[7]; } usb_cpm2_t; diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h index 3c2fced3ac22..c346d0bcd230 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -215,10 +215,7 @@ struct usb_ctlr { u8 usb_usadr; u8 usb_uscom; u8 res1[1]; - __be16 usb_usep1; - __be16 usb_usep2; - __be16 usb_usep3; - __be16 usb_usep4; + __be16 usb_usep[4]; u8 res2[4]; __be16 usb_usber; u8 res3[2]; -- cgit v1.2.3 From ea37194d680ff62c5cd187b40d6ea78fa2631ec1 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 8 Nov 2008 12:32:41 -0600 Subject: powerpc: Updated Freescale PPC related defconfigs unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable ISDN drivers which seem to be the only place we are using pci_find_device Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/asp8347_defconfig | 121 ++++++---- arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 158 +++++++----- arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | 158 +++++++----- arch/powerpc/configs/83xx/mpc832x_mds_defconfig | 125 ++++++---- arch/powerpc/configs/83xx/mpc832x_rdb_defconfig | 136 ++++++----- arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 171 +++++++++---- arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig | 121 ++++++---- arch/powerpc/configs/83xx/mpc834x_mds_defconfig | 123 ++++++---- arch/powerpc/configs/83xx/mpc836x_mds_defconfig | 126 ++++++---- arch/powerpc/configs/83xx/mpc836x_rdk_defconfig | 119 +++++---- arch/powerpc/configs/83xx/mpc837x_mds_defconfig | 123 ++++++---- arch/powerpc/configs/83xx/mpc837x_rdb_defconfig | 155 +++++++----- arch/powerpc/configs/83xx/sbc834x_defconfig | 119 +++++---- arch/powerpc/configs/85xx/ksi8560_defconfig | 87 ++++--- arch/powerpc/configs/85xx/mpc8536_ds_defconfig | 143 +++++++++-- arch/powerpc/configs/85xx/mpc8540_ads_defconfig | 74 ++++-- arch/powerpc/configs/85xx/mpc8544_ds_defconfig | 143 +++++++++-- arch/powerpc/configs/85xx/mpc8560_ads_defconfig | 90 +++++-- arch/powerpc/configs/85xx/mpc8568mds_defconfig | 93 +++++-- arch/powerpc/configs/85xx/mpc8572_ds_defconfig | 143 +++++++++-- arch/powerpc/configs/85xx/mpc85xx_cds_defconfig | 91 +++++-- arch/powerpc/configs/85xx/sbc8548_defconfig | 75 ++++-- arch/powerpc/configs/85xx/sbc8560_defconfig | 78 ++++-- arch/powerpc/configs/85xx/stx_gp3_defconfig | 115 ++++++--- arch/powerpc/configs/85xx/tqm8540_defconfig | 91 +++++-- arch/powerpc/configs/85xx/tqm8541_defconfig | 96 +++++--- arch/powerpc/configs/85xx/tqm8548_defconfig | 98 ++++++-- arch/powerpc/configs/85xx/tqm8555_defconfig | 96 +++++--- arch/powerpc/configs/85xx/tqm8560_defconfig | 96 +++++--- arch/powerpc/configs/86xx/gef_sbc610_defconfig | 281 ++++++++++++++++------ arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig | 177 ++++++++++---- arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 175 ++++++++++---- arch/powerpc/configs/86xx/sbc8641d_defconfig | 152 +++++++----- arch/powerpc/configs/adder875_defconfig | 69 ++++-- arch/powerpc/configs/c2k_defconfig | 179 ++++++++------ arch/powerpc/configs/ep8248e_defconfig | 113 +++++---- arch/powerpc/configs/ep88xc_defconfig | 67 ++++-- arch/powerpc/configs/linkstation_defconfig | 122 +++++++--- arch/powerpc/configs/mgcoge_defconfig | 234 ++++++++++++++---- arch/powerpc/configs/mgsuvd_defconfig | 107 +++++--- arch/powerpc/configs/mpc7448_hpc2_defconfig | 78 ++++-- arch/powerpc/configs/mpc8272_ads_defconfig | 113 +++++---- arch/powerpc/configs/mpc83xx_defconfig | 156 +++++++----- arch/powerpc/configs/mpc85xx_defconfig | 145 +++++++++-- arch/powerpc/configs/mpc866_ads_defconfig | 77 ++++-- arch/powerpc/configs/mpc86xx_defconfig | 144 +++++++++-- arch/powerpc/configs/mpc885_ads_defconfig | 67 ++++-- arch/powerpc/configs/pq2fads_defconfig | 137 ++++++----- arch/powerpc/configs/prpmc2800_defconfig | 126 +++++++--- arch/powerpc/configs/storcenter_defconfig | 83 ++++--- 50 files changed, 4234 insertions(+), 1932 deletions(-) diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index 0b1fa20f745c..cbecaf3d7906 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:01 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:49 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -54,8 +54,6 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_REDBOOT=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -99,7 +97,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +153,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -165,10 +161,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -188,24 +184,21 @@ CONFIG_ASP834x=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -225,6 +218,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -239,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -259,7 +254,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -272,7 +266,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -340,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -360,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -470,7 +464,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -547,8 +540,6 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -559,8 +550,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -583,6 +578,7 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -667,14 +663,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -710,12 +703,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -753,6 +740,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -774,7 +762,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -829,7 +816,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -855,6 +841,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -907,6 +904,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -923,6 +922,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -930,6 +931,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -956,6 +958,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -972,7 +975,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1018,12 +1023,15 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1032,6 +1040,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1043,12 +1052,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1078,6 +1088,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1126,6 +1137,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1197,7 +1209,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1229,13 +1240,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1247,14 +1260,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1327,6 +1345,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index b7eae2bdf19c..bfc32ea265a7 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:17 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:50 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,21 @@ CONFIG_MPC831x_RDB=y CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -340,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -360,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -470,6 +464,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set CONFIG_MTD_NAND_FSL_ELBC=y +# CONFIG_MTD_NAND_FSL_UPM is not set # CONFIG_MTD_ONENAND is not set # @@ -482,7 +477,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -583,13 +577,12 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -638,8 +631,6 @@ CONFIG_CICADA_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -651,6 +642,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -671,6 +665,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -693,18 +688,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -790,14 +789,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -833,12 +829,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -876,6 +866,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -913,7 +904,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -935,6 +925,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -969,7 +960,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -995,6 +985,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1037,12 +1038,18 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1061,6 +1068,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1084,6 +1093,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # @@ -1092,6 +1103,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1113,7 +1125,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1134,6 +1145,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1151,23 +1163,26 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -CONFIG_USB_GADGET_NET2280=y -CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set @@ -1179,6 +1194,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1224,17 +1240,21 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1243,6 +1263,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1254,12 +1275,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1289,6 +1311,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1337,6 +1360,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1373,7 +1397,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1427,15 +1450,23 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1444,6 +1475,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1455,14 +1487,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1535,6 +1572,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index b0a27a67d8c7..aad0e1a98c55 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:18 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:51 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,21 @@ CONFIG_MPC831x_RDB=y CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -340,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -360,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -470,6 +464,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_NAND_FSL_UPM is not set # CONFIG_MTD_ONENAND is not set # @@ -482,7 +477,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -584,8 +578,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -651,6 +643,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -699,8 +692,6 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -712,6 +703,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -732,6 +726,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -754,18 +749,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -851,14 +850,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -894,12 +890,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -937,6 +927,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -974,7 +965,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -996,6 +986,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -1030,7 +1021,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -1056,6 +1046,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1098,12 +1099,18 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1122,6 +1129,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1145,6 +1154,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # @@ -1153,6 +1164,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1174,7 +1186,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1195,6 +1206,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1212,23 +1224,26 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -CONFIG_USB_GADGET_NET2280=y -CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set @@ -1240,6 +1255,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1285,17 +1301,21 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1304,6 +1324,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1315,12 +1336,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1350,6 +1372,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1398,6 +1421,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1434,7 +1458,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1488,15 +1511,23 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1505,6 +1536,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1516,14 +1548,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1596,6 +1633,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index ad825bcddd1f..9cb8c8b956e4 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:18 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:53 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,20 @@ CONFIG_MPC832x_MDS=y CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set # @@ -225,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -240,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,7 +254,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -273,7 +266,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -341,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -361,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -391,7 +384,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -491,8 +483,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -537,8 +527,6 @@ CONFIG_DAVICOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -549,8 +537,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -577,18 +569,22 @@ CONFIG_UCC_GETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -665,15 +661,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -709,12 +702,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -751,6 +738,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -772,7 +760,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -827,7 +814,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -848,6 +834,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -884,6 +881,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -900,6 +903,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -945,12 +949,15 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -959,6 +966,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -970,12 +978,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1005,6 +1014,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1042,6 +1052,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1071,13 +1082,11 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y -# CONFIG_QE_GPIO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1107,13 +1116,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1125,14 +1136,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1205,6 +1221,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 38267501f44d..9cc976f010c9 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:19 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:54 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,20 @@ CONFIG_MPC832x_RDB=y CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set # @@ -225,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -240,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,7 +254,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -273,7 +266,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -341,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -361,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -392,7 +385,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -493,8 +485,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -539,8 +529,6 @@ CONFIG_ICPLUS_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -552,13 +540,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -581,18 +572,22 @@ CONFIG_UCC_GETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -678,15 +673,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -724,12 +716,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -767,6 +753,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -803,7 +790,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -825,6 +811,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -859,7 +846,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -885,6 +871,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -927,12 +924,18 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -951,6 +954,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -974,6 +979,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -981,6 +988,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1002,7 +1010,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1023,6 +1030,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1040,13 +1048,15 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y @@ -1054,7 +1064,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set @@ -1068,6 +1078,7 @@ CONFIG_MMC_SPI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1079,12 +1090,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1117,6 +1129,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1154,6 +1167,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1227,13 +1241,11 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y -# CONFIG_QE_GPIO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1263,13 +1275,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1281,14 +1295,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1361,6 +1380,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 90aab340e7ff..e55ff7c47a36 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:20 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:56 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,21 @@ CONFIG_MPC834x_ITX=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -339,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,7 +463,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -496,7 +489,54 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -# CONFIG_BLK_DEV_IDE is not set + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support @@ -572,8 +612,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -640,6 +678,7 @@ CONFIG_PATA_OF_PLATFORM=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -709,18 +748,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -786,14 +829,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -829,12 +869,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -872,6 +906,7 @@ CONFIG_SENSORS_PCF8574=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -907,7 +942,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -933,6 +967,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -984,6 +1029,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1000,6 +1047,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1007,6 +1056,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1027,7 +1077,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1048,6 +1097,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1065,7 +1115,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1111,17 +1163,21 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1130,6 +1186,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1141,12 +1198,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1179,6 +1237,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1217,6 +1276,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1292,7 +1352,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1322,13 +1381,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1340,14 +1401,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1420,6 +1486,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 7458a242d251..426232cb0097 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:21 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:57 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,21 @@ CONFIG_MPC834x_ITX=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -339,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,7 +463,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -570,8 +563,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -637,18 +628,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -714,14 +709,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -757,12 +749,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -800,6 +786,7 @@ CONFIG_SENSORS_PCF8574=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -835,7 +822,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -861,6 +847,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -912,6 +909,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -928,6 +927,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -935,6 +936,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -955,7 +957,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -976,6 +977,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -992,7 +994,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1038,17 +1042,21 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1057,6 +1065,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1068,12 +1077,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1106,6 +1116,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1144,6 +1155,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1219,7 +1231,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1249,13 +1260,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1267,14 +1280,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1347,6 +1365,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 1a92798938cf..36e2e93a1c53 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:21 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:58 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,21 @@ CONFIG_MPC834x_MDS=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -339,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -389,7 +383,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -465,8 +458,6 @@ CONFIG_MARVELL_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -477,6 +468,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -497,6 +491,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -519,18 +514,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -606,14 +605,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -649,12 +645,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -691,6 +681,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -712,7 +703,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -767,7 +757,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -788,6 +777,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -824,6 +824,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -840,6 +846,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -885,12 +892,15 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -899,6 +909,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -910,12 +921,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -945,6 +957,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -982,6 +995,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1014,7 +1028,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1044,13 +1057,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1062,14 +1077,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1142,6 +1162,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 03d8cede0272..80eb6c9a05c4 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:22 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:59 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -186,24 +182,20 @@ CONFIG_MPC836x_MDS=y # CONFIG_ASP834x is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set # @@ -224,6 +216,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +232,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +252,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +264,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -339,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +353,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -466,7 +459,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -566,8 +558,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -612,8 +602,6 @@ CONFIG_MARVELL_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -624,8 +612,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -652,18 +644,22 @@ CONFIG_UCC_GETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -740,15 +736,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -784,12 +777,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -826,6 +813,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -847,7 +835,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -902,7 +889,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -923,6 +909,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -959,6 +956,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -975,6 +978,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1020,12 +1024,15 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1034,6 +1041,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1045,12 +1053,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1080,6 +1089,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1096,6 +1106,7 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1117,6 +1128,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1146,13 +1158,11 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y -# CONFIG_QE_GPIO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1182,13 +1192,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1200,14 +1212,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1280,6 +1297,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index cdf84177370a..b9b236806e9f 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:24 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:00 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -54,8 +54,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -99,7 +97,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +153,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -165,10 +161,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,31 +183,26 @@ CONFIG_MPC836x_RDK=y # CONFIG_ASP834x is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y # CONFIG_FSL_ULI1575 is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -225,6 +216,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -239,15 +232,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -259,7 +252,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -274,7 +266,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -342,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -362,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -480,7 +472,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -581,6 +572,7 @@ CONFIG_UCC_GETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -660,15 +652,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_SERIAL_QE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -705,12 +694,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -749,6 +732,7 @@ CONFIG_I2C_MPC=y # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -804,7 +788,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -825,6 +808,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -852,6 +846,7 @@ CONFIG_DAB=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -874,9 +869,6 @@ CONFIG_FB_MACMODES=y # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set # CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set @@ -891,6 +883,7 @@ CONFIG_FB_OF=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -903,6 +896,7 @@ CONFIG_FB_OF=y # CONFIG_FB_FSL_DIU is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -930,7 +924,14 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -940,6 +941,7 @@ CONFIG_HID=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -951,12 +953,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -986,6 +989,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1034,6 +1038,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1064,13 +1069,11 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_UCC_SLOW=y CONFIG_UCC_FAST=y CONFIG_UCC=y -CONFIG_QE_GPIO=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1102,13 +1105,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1116,7 +1121,7 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set # CONFIG_PPC_EARLY_DEBUG_G5 is not set -CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set @@ -1131,14 +1136,19 @@ CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1211,6 +1221,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index 97e02d7a5b09..f6350d7e1688 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:23 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:00 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -99,7 +97,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -122,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +153,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -165,10 +161,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -188,30 +184,26 @@ CONFIG_MPC837x_MDS=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -225,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -239,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -259,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -272,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -340,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -360,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -390,7 +383,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -491,8 +483,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -597,8 +587,6 @@ CONFIG_MARVELL_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -609,8 +597,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -633,18 +625,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -721,14 +717,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -766,12 +759,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -808,6 +795,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -829,7 +817,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -884,7 +871,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -905,6 +891,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -941,6 +938,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -957,6 +960,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -966,6 +970,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -977,12 +982,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1012,6 +1018,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1049,6 +1056,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1085,7 +1093,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1113,13 +1120,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1131,14 +1140,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1211,6 +1225,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 5ac33054ce2c..f447de16f75d 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:25 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:01 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -99,7 +97,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -122,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +153,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -165,10 +161,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -188,30 +184,26 @@ CONFIG_MPC837x_RDB=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -225,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -239,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -259,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -272,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -335,6 +328,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -355,11 +349,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -385,7 +378,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -487,8 +479,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -554,6 +544,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set CONFIG_MD_RAID1=y @@ -603,8 +594,6 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -615,8 +604,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -639,6 +632,7 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -673,7 +667,7 @@ CONFIG_GIANFAR=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -724,14 +718,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -769,12 +760,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -812,6 +797,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -833,7 +819,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -888,7 +873,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -914,6 +898,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -956,9 +951,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -977,6 +999,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -993,6 +1017,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1000,6 +1026,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1028,6 +1055,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1044,7 +1072,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1054,6 +1084,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1065,12 +1096,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1100,6 +1132,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1137,6 +1170,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1173,7 +1207,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1201,13 +1234,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1219,6 +1254,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y @@ -1229,8 +1265,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1303,6 +1343,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index c359cc2a380e..8d2d7eeab5f5 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:27 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:02 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -120,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -156,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -163,10 +159,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -186,30 +182,26 @@ CONFIG_SBC834x=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -223,6 +215,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -237,15 +231,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -257,7 +251,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -270,7 +263,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -338,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -358,11 +352,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -388,7 +381,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -464,8 +456,6 @@ CONFIG_BROADCOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -476,8 +466,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -500,6 +494,7 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -575,14 +570,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -620,12 +612,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -662,6 +648,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -683,7 +670,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -738,7 +724,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -759,6 +744,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -795,7 +791,14 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -805,16 +808,18 @@ CONFIG_HID=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -844,6 +849,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -881,6 +887,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -893,7 +900,6 @@ CONFIG_RPCSEC_GSS_KRB5=y # Partition Types # # CONFIG_PARTITION_ADVANCED is not set -CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set @@ -902,7 +908,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -930,13 +935,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -948,14 +955,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1028,6 +1040,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 8bb89f26a20d..1af7b9e37b61 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:28 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:03 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -104,6 +104,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -117,10 +118,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -147,6 +145,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -181,15 +180,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # CONFIG_HIGHMEM=y -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -203,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -217,15 +219,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -311,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -331,11 +334,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -454,17 +456,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_IDEDISK is not set -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -515,6 +516,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -590,12 +594,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -659,6 +657,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -692,6 +698,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -715,6 +727,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -726,13 +739,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -762,6 +776,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -797,6 +812,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -829,7 +845,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -882,15 +897,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -899,6 +922,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -910,12 +934,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -987,6 +1013,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_TALITOS is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig index 6b516bea6e75..e243e14a6708 100644 --- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 07:18:18 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:05 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -124,10 +126,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +158,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -194,8 +193,10 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -215,6 +216,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -229,15 +232,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,7 +263,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -362,6 +365,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -382,12 +386,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -633,8 +636,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -658,18 +665,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -704,7 +715,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -872,6 +883,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -912,7 +934,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -929,6 +950,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -945,6 +971,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -952,6 +980,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1004,6 +1034,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1029,6 +1066,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1127,9 +1165,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1148,6 +1213,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1171,6 +1238,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1178,6 +1247,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1199,7 +1269,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1220,6 +1289,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1237,7 +1307,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1283,12 +1355,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1309,6 +1384,7 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA is not set # CONFIG_DMATEST is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1320,13 +1396,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1364,6 +1441,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1408,6 +1486,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1483,7 +1562,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1537,15 +1615,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1554,6 +1640,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -1565,16 +1652,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1647,6 +1737,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index 1ea181f826f1..d790cbab80b8 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:30 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:06 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -107,6 +107,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -120,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -150,6 +147,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -184,8 +182,10 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -205,6 +205,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -219,15 +221,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -313,6 +315,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -333,11 +336,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -421,6 +423,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_GIANFAR=y @@ -544,6 +549,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -577,6 +590,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -600,6 +619,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -611,12 +631,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -646,6 +667,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -680,6 +702,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -712,7 +735,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -764,15 +786,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -781,6 +811,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -791,12 +822,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -868,6 +901,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig index 1aecdeab9841..f6cb01495ea6 100644 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 07:20:43 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:08 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -124,10 +126,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +158,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -194,8 +193,10 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set CONFIG_FSL_ULI1575=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -215,6 +216,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -229,15 +232,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -261,7 +264,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -363,6 +366,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -383,12 +387,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -634,8 +637,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -657,18 +664,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -703,7 +714,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -872,6 +883,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -912,7 +934,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -929,6 +950,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -945,6 +971,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -952,6 +980,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1004,6 +1034,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1029,6 +1066,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1129,9 +1167,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1150,6 +1215,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1173,6 +1240,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1180,6 +1249,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1201,7 +1271,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1222,6 +1291,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1239,7 +1309,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1285,12 +1357,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1311,6 +1386,7 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA is not set # CONFIG_DMATEST is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1322,12 +1398,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1365,6 +1442,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1409,6 +1487,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1484,7 +1563,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1538,15 +1616,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1555,6 +1641,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1565,16 +1652,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1647,6 +1737,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 06e26d906f65..6cf929259ba7 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:32 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:09 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -108,7 +108,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +123,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +150,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -185,15 +185,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -207,6 +208,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -221,15 +224,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -252,7 +255,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -322,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -342,11 +346,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -459,8 +462,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -469,7 +476,6 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -487,18 +493,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -571,12 +581,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -CONFIG_SERIAL_CPM_SCC2=y -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -648,6 +652,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -683,6 +695,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -699,6 +717,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -708,6 +727,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -719,12 +739,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -754,6 +775,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -788,6 +810,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -820,7 +843,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -872,15 +894,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -889,6 +919,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -899,12 +930,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -976,6 +1009,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig index dc27c74955fa..597be8491812 100644 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:33 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:11 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -105,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -118,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -154,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -189,8 +188,10 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -210,6 +211,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -224,15 +227,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,7 +258,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -325,6 +328,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -345,11 +349,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -530,8 +533,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -554,18 +561,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -815,6 +826,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -851,6 +873,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -867,6 +895,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -912,12 +941,15 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -926,6 +958,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -937,12 +970,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -972,6 +1006,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1009,6 +1044,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1036,13 +1072,11 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_QE_GPIO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1094,15 +1128,23 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1111,6 +1153,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1132,14 +1175,19 @@ CONFIG_PPC_EARLY_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1212,6 +1260,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig index eda45bb8a13f..635588319e0d 100644 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 07:21:42 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:13 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -124,10 +126,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +158,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -194,8 +193,10 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set CONFIG_FSL_ULI1575=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -215,6 +216,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -229,15 +232,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -261,7 +264,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -363,6 +366,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -383,12 +387,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -634,8 +637,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -657,18 +664,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -703,7 +714,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -872,6 +883,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -912,7 +934,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -929,6 +950,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -945,6 +971,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -952,6 +980,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1004,6 +1034,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1029,6 +1066,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1129,9 +1167,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1150,6 +1215,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1173,6 +1240,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1180,6 +1249,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1201,7 +1271,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1222,6 +1291,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1239,7 +1309,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1285,12 +1357,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1299,6 +1374,7 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1310,12 +1386,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1353,6 +1430,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1397,6 +1475,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1472,7 +1551,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1526,15 +1604,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1543,6 +1629,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1553,16 +1640,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1635,6 +1725,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 97f3c4fe440b..8769359dfe6a 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:34 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:14 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -107,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -120,10 +122,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -150,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -184,8 +183,10 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -205,6 +206,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -219,15 +222,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -250,7 +253,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -320,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -340,11 +344,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -396,18 +399,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_IDEDISK is not set -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -510,13 +512,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -534,18 +539,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -678,6 +687,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -713,6 +730,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -729,6 +752,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -738,6 +762,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -749,12 +774,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -784,6 +810,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -818,6 +845,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -850,7 +878,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -902,15 +929,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -919,6 +954,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -929,12 +965,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1006,6 +1044,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 41cedc4b63f6..bfe3c9731573 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:35 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:16 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -106,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -118,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -148,6 +146,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -182,14 +181,15 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -203,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -217,15 +219,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -248,7 +250,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -317,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -337,11 +340,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -451,8 +453,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -474,18 +480,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -618,6 +628,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -651,6 +669,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -660,16 +679,18 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -699,6 +720,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -733,6 +755,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -753,7 +776,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -781,13 +803,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -798,12 +822,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -875,6 +901,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index daef36f41b42..8c507f8d15a8 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:36 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:17 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -107,6 +107,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -119,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -149,6 +146,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -183,14 +181,15 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -204,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -218,15 +219,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -312,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -332,11 +334,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -420,6 +421,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_GIANFAR=y @@ -541,6 +545,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -574,6 +586,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -617,12 +635,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set CONFIG_RTC_DRV_M48T59=y +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -631,16 +652,18 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -670,6 +693,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -704,6 +728,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -736,7 +761,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -787,15 +811,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -804,6 +836,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -825,12 +858,14 @@ CONFIG_PPC_EARLY_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -902,6 +937,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index 2b05d43f8f7e..5a0cf58d2b8c 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:37 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:19 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -108,7 +108,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +124,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +156,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -191,15 +191,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # CONFIG_HIGHMEM=y -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -213,6 +214,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -227,15 +230,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +261,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -319,7 +322,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -335,44 +337,46 @@ CONFIG_NETFILTER_ADVANCED=y CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set # CONFIG_IP_NF_TARGET_LOG is not set @@ -385,6 +389,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -405,11 +410,10 @@ CONFIG_NET_PKTGEN=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -470,18 +474,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -651,9 +654,13 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -676,18 +683,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -746,6 +757,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -791,12 +803,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -CONFIG_SERIAL_CPM_SCC2=y -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -980,6 +986,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1019,12 +1035,19 @@ CONFIG_DRM=m # # CONFIG_DISPLAY_SUPPORT is not set CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set # CONFIG_SND is not set # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1041,6 +1064,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1051,6 +1075,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1062,12 +1087,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1103,6 +1129,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1139,6 +1166,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1199,7 +1227,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=m @@ -1253,15 +1280,23 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1270,6 +1305,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y @@ -1280,12 +1316,14 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1358,6 +1396,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 1b2d5d577915..f3e4f3481fda 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:37 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:20 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -105,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -118,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -148,6 +146,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -183,14 +182,15 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -204,6 +204,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -218,15 +220,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -249,7 +251,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_HAS_RAPIDIO is not set # @@ -316,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -336,11 +339,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -466,18 +468,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -580,6 +581,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -600,6 +604,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -621,18 +626,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -867,6 +876,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -903,6 +923,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -919,6 +945,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -928,6 +955,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -939,12 +967,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -974,6 +1003,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1019,6 +1049,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1051,7 +1082,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1083,13 +1113,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1100,12 +1132,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1177,6 +1211,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index da841a09755c..c62489394535 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:39 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:21 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -106,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -149,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -184,15 +184,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -206,6 +207,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -220,15 +223,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -251,7 +254,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_HAS_RAPIDIO is not set # @@ -318,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,11 +342,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,18 +472,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -583,6 +585,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -603,6 +608,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -625,18 +631,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -715,12 +725,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y @@ -900,6 +904,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -936,6 +951,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -952,6 +973,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -961,6 +983,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -972,12 +995,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1007,6 +1031,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1052,6 +1077,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1084,7 +1110,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1116,13 +1141,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1133,12 +1160,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1210,6 +1239,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index ca1234d26855..eef45b97dc3e 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:40 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:22 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -107,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +123,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +155,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -192,8 +191,10 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -213,6 +214,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -227,15 +230,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,7 +263,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -330,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -350,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -458,6 +461,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_NAND_FSL_UPM is not set # CONFIG_MTD_ONENAND is not set # @@ -502,18 +506,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_IDEDISK is not set -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -616,13 +619,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -640,18 +646,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -885,6 +895,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -921,6 +942,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -937,6 +964,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -982,12 +1010,15 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -996,6 +1027,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1007,12 +1039,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1042,6 +1075,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1078,6 +1112,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1110,7 +1145,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1162,15 +1196,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1179,6 +1221,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1189,12 +1232,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1267,6 +1312,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index dcf9cfe28b55..11b637e99a54 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:42 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:23 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -106,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -149,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -184,15 +184,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -206,6 +207,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -220,15 +223,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -251,7 +254,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_HAS_RAPIDIO is not set # @@ -318,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,11 +342,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,18 +472,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -583,6 +585,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -603,6 +608,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -625,18 +631,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -715,12 +725,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y @@ -900,6 +904,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -936,6 +951,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -952,6 +973,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -961,6 +983,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -972,12 +995,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1007,6 +1031,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1052,6 +1077,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1084,7 +1110,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1116,13 +1141,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1133,12 +1160,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1210,6 +1239,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 8d676629cdb1..2519169b6d4b 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:43 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:25 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -106,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -149,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -184,15 +184,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -206,6 +207,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -220,15 +223,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -251,7 +254,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_HAS_RAPIDIO is not set # @@ -318,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,11 +342,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,18 +472,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -583,6 +585,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -603,6 +608,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -625,18 +631,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -715,12 +725,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y @@ -900,6 +904,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -936,6 +951,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -952,6 +973,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -961,6 +983,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -972,12 +995,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1007,6 +1031,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1052,6 +1077,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1084,7 +1110,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1116,13 +1141,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1133,12 +1160,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1210,6 +1239,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 312d7afbbe44..2da13e00a807 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Wed Jun 11 12:06:53 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:30 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y @@ -23,7 +24,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y @@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -109,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -117,10 +120,13 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -138,6 +144,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -152,6 +159,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -159,15 +167,16 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set # CONFIG_PPC_PMAC is not set -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -CONFIG_PPC_86xx=y -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set @@ -184,7 +193,10 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -199,17 +211,20 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -219,17 +234,19 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -242,6 +259,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -250,7 +268,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -270,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -287,6 +301,7 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -325,7 +340,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -362,8 +376,8 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set @@ -372,37 +386,39 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -411,6 +427,7 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_ECN=m # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_SECURITY is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -420,24 +437,21 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_MH is not set -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m - -# -# Bridge: Netfilter Configuration -# +# CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=m @@ -456,8 +470,11 @@ CONFIG_ATM_LANE=m CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set @@ -477,7 +494,7 @@ CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m -# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -515,12 +532,11 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -646,12 +662,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -731,6 +749,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -798,12 +817,15 @@ CONFIG_SATA_SIL=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -840,14 +862,17 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -861,9 +886,11 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -895,7 +922,7 @@ CONFIG_ATM_DRIVERS=y # CONFIG_ATM_AMBASSADOR is not set # CONFIG_ATM_HORIZON is not set # CONFIG_ATM_IA is not set -# CONFIG_ATM_FORE200E_MAYBE is not set +# CONFIG_ATM_FORE200E is not set # CONFIG_ATM_HE is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -928,7 +955,7 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -962,6 +989,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -1000,43 +1028,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # CONFIG_DS1682=y +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -1045,10 +1094,13 @@ CONFIG_DS1682=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -1102,6 +1154,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1109,6 +1162,8 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set # # PCI-based Watchdog Cards @@ -1130,8 +1185,21 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1171,10 +1239,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1185,9 +1249,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1205,6 +1296,9 @@ CONFIG_USB=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1225,6 +1319,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1232,6 +1328,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1261,7 +1358,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1274,7 +1370,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1291,8 +1387,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_ATM is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1325,6 +1423,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1334,12 +1433,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1348,6 +1450,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1361,12 +1464,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1399,6 +1503,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1419,6 +1524,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1429,14 +1535,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1502,9 +1608,9 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1531,6 +1637,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1547,20 +1655,42 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1568,9 +1698,9 @@ CONFIG_DEBUGGER=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set -CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 @@ -1579,10 +1709,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -1621,6 +1753,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1652,6 +1788,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index c98c6ee44492..72854a10dfa1 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:10 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:28 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y @@ -22,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -52,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -99,7 +98,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -123,10 +123,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -159,6 +155,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -166,10 +163,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -179,26 +176,24 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set CONFIG_MPC8610_HPCD=y +# CONFIG_GEF_SBC610 is not set CONFIG_MPC8610=y # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_FSL_ULI1575=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -218,6 +213,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -232,15 +229,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -252,7 +249,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -267,7 +263,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -353,6 +349,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -373,11 +370,10 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -493,7 +489,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -519,7 +514,54 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -# CONFIG_BLK_DEV_IDE is not set + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support @@ -595,8 +637,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -685,8 +725,6 @@ CONFIG_DUMMY=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -703,8 +741,12 @@ CONFIG_ULI526X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -796,13 +838,10 @@ CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -838,12 +877,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -907,6 +940,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -934,6 +978,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -956,9 +1001,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_OF is not set -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set # CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set @@ -973,6 +1015,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -985,6 +1028,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_FSL_DIU=y # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1001,6 +1045,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1082,11 +1127,10 @@ CONFIG_SND_PCI=y # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_PPC=y -# CONFIG_SND_POWERMAC is not set -# CONFIG_SND_AOA is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_MPC8610=y CONFIG_SND_SOC_MPC8610_HPCD=y +# CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4270_VD33_ERRATA=y # CONFIG_SOUND_PRIME is not set @@ -1094,6 +1138,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1110,6 +1160,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1155,12 +1206,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1169,6 +1223,7 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1180,12 +1235,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -1214,6 +1270,7 @@ CONFIG_FS_MBCACHE=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1254,6 +1311,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1330,7 +1388,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1383,15 +1440,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1400,6 +1465,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1411,12 +1477,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1489,6 +1557,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 444ddf98436d..41220ece603d 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:11 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:29 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y @@ -23,7 +24,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -100,7 +101,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -124,10 +126,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -161,6 +160,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -168,10 +168,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -181,25 +181,23 @@ CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_FSL_ULI1575=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -219,9 +217,10 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set -# CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -235,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,7 +254,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -268,7 +266,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -370,6 +368,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -390,12 +389,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -425,7 +423,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -528,8 +525,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -634,8 +629,6 @@ CONFIG_VITESSE_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -646,8 +639,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -670,18 +667,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -716,7 +717,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -781,14 +782,11 @@ CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y @@ -824,12 +822,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -894,6 +886,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -934,7 +937,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -951,6 +953,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -967,6 +974,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -974,6 +983,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1026,6 +1037,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1051,6 +1069,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1135,8 +1154,6 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_PPC=y -# CONFIG_SND_POWERMAC is not set -# CONFIG_SND_AOA is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set @@ -1153,9 +1170,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1174,6 +1218,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1197,6 +1243,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1204,6 +1252,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1225,7 +1274,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1246,6 +1294,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1263,7 +1312,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1309,12 +1360,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1323,6 +1377,7 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1334,12 +1389,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1377,6 +1433,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1421,6 +1478,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1496,7 +1554,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1550,15 +1607,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1567,6 +1632,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1578,15 +1644,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1659,6 +1729,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index d900f8f376cf..a4342862f6ef 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:15 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:26 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y @@ -23,7 +24,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -100,7 +101,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -123,10 +125,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +159,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -167,10 +167,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -180,25 +180,23 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set CONFIG_SBC8641D=y # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -219,9 +217,10 @@ CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set -# CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -235,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -255,7 +254,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -270,7 +268,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -341,7 +339,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -378,8 +375,8 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set @@ -388,37 +385,39 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -437,25 +436,21 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_MH is not set -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set - -# -# Bridge: Netfilter Configuration -# # CONFIG_BRIDGE_NF_EBTABLES is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=m @@ -476,6 +471,7 @@ CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set @@ -497,6 +493,7 @@ CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -534,12 +531,11 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -649,7 +645,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -686,6 +681,7 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -742,8 +738,6 @@ CONFIG_BROADCOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -754,8 +748,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -778,6 +776,7 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -890,14 +889,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set @@ -934,12 +930,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -997,7 +987,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1052,7 +1041,6 @@ CONFIG_WATCHDOG=y CONFIG_SOFT_WATCHDOG=m # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -1073,6 +1061,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1116,6 +1115,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1132,6 +1137,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1141,6 +1147,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1154,9 +1161,11 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set @@ -1166,12 +1175,14 @@ CONFIG_REISERFS_FS_POSIX_ACL=y # CONFIG_REISERFS_FS_SECURITY is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1199,6 +1210,7 @@ CONFIG_AUTOFS4_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1237,6 +1249,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1257,7 +1270,6 @@ CONFIG_CIFS_POSIX=y # Partition Types # # CONFIG_PARTITION_ADVANCED is not set -CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" @@ -1305,7 +1317,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1358,16 +1369,24 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1376,6 +1395,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -1388,6 +1408,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set @@ -1397,10 +1418,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -1474,6 +1497,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index 63cd51fbb4b9..024f279af90a 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:00 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:32 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_8xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -102,6 +102,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -115,10 +116,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -144,6 +142,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -156,6 +155,7 @@ CONFIG_CPM1=y # CONFIG_MPC885ADS is not set # CONFIG_PPC_EP88XC is not set CONFIG_PPC_ADDER875=y +# CONFIG_PPC_MGSUVD is not set # # MPC8xx CPM Options @@ -184,6 +184,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -191,7 +192,6 @@ CONFIG_CPM=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -205,6 +205,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_8XX_MINIMAL_FPEMU is not set @@ -220,15 +222,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -310,6 +312,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -330,11 +333,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -476,6 +478,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -534,6 +539,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -573,12 +579,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -613,6 +613,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -652,16 +660,18 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -690,6 +700,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -727,6 +738,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -762,7 +774,6 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -812,14 +823,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -828,6 +847,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -839,6 +859,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index c16521ffb477..5078594cd1f5 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:02 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:34 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -114,7 +114,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -130,10 +132,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -166,6 +164,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -227,7 +226,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=m # Kernel options # CONFIG_HIGHMEM=y -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -241,6 +239,8 @@ CONFIG_HZ=250 CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -255,15 +255,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -285,7 +285,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=y @@ -361,36 +361,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -CONFIG_IP_VS=m -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y # CONFIG_IPV6_ROUTER_PREF is not set @@ -427,8 +397,8 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_SECMARK is not set @@ -438,37 +408,70 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_IP_VS=m +# CONFIG_IP_VS_IPV6 is not set +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -487,25 +490,21 @@ CONFIG_IP_NF_ARP_MANGLE=m # # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_MH is not set -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set - -# -# Bridge: Netfilter Configuration -# CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -545,6 +544,7 @@ CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set @@ -566,6 +566,7 @@ CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -627,12 +628,11 @@ CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -910,8 +910,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -933,6 +937,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -998,6 +1003,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # @@ -1226,6 +1232,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1283,6 +1299,8 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1305,6 +1323,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # Enable Host or Gadget support to see Inventra options @@ -1316,6 +1336,7 @@ CONFIG_USB_UHCI_HCD=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1337,7 +1358,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1413,6 +1433,7 @@ CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m @@ -1430,12 +1451,14 @@ CONFIG_USB_LED=m # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m # CONFIG_USB_CXACRU is not set # CONFIG_USB_UEAGLEATM is not set # CONFIG_USB_XUSBATM is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1464,8 +1487,8 @@ CONFIG_DMADEVICES=y # # DMA Devices # -# CONFIG_FSL_DMA is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1475,12 +1498,13 @@ CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=m CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1519,6 +1543,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1570,12 +1595,14 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set @@ -1651,7 +1678,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=m @@ -1707,17 +1733,25 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1726,6 +1760,7 @@ CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1738,6 +1773,7 @@ CONFIG_BOOTX_TEXT=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set @@ -1756,10 +1792,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -1833,6 +1871,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index cd691f770810..a6f1cff564e6 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:03 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:36 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -48,13 +48,11 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y +# CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -93,7 +91,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -103,7 +100,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -115,10 +114,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -144,6 +140,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -151,39 +148,36 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_PPC_82xx=y # CONFIG_MPC8272_ADS is not set # CONFIG_PQ2FADS is not set CONFIG_EP8248E=y +# CONFIG_MGCOGE is not set # CONFIG_PQ2ADS is not set CONFIG_8260=y CONFIG_8272=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -192,7 +186,6 @@ CONFIG_CPM=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -206,6 +199,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -215,15 +210,15 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -235,7 +230,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -247,7 +241,7 @@ CONFIG_PCI_8260=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -303,7 +297,6 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -330,10 +323,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -360,11 +355,10 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,7 +463,6 @@ CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -534,8 +527,6 @@ CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -546,8 +537,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -570,18 +565,23 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -629,21 +629,12 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -CONFIG_SERIAL_CPM_SCC4=y -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -692,6 +683,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -732,6 +731,7 @@ CONFIG_DAB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -741,10 +741,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -774,6 +776,7 @@ CONFIG_AUTOFS4_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -874,7 +877,6 @@ CONFIG_NLS_UTF8=y # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -924,15 +926,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -940,6 +950,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y @@ -951,14 +962,19 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1025,6 +1041,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 480225be2f39..870d28976a44 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:04 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:37 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_8xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -101,6 +101,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -114,10 +115,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -143,6 +141,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -155,6 +154,7 @@ CONFIG_CPM1=y # CONFIG_MPC885ADS is not set CONFIG_PPC_EP88XC=y # CONFIG_PPC_ADDER875 is not set +# CONFIG_PPC_MGSUVD is not set # # MPC8xx CPM Options @@ -183,6 +183,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -204,6 +205,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y @@ -219,15 +222,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -309,6 +312,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -329,11 +333,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -475,6 +478,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -529,12 +535,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -570,6 +570,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -608,16 +616,18 @@ CONFIG_DAB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -646,6 +656,7 @@ CONFIG_DAB=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -683,6 +694,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -718,7 +730,6 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -768,14 +779,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -784,6 +803,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -794,6 +814,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 851b27e45cfc..54fa62481373 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Fri Oct 24 00:42:39 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:38 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -124,10 +126,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +158,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -199,6 +198,7 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # @@ -219,6 +219,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -233,15 +235,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -263,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -324,7 +326,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -354,13 +355,14 @@ CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set @@ -374,19 +376,21 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set CONFIG_NETFILTER_XT_MATCH_MAC=m # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set @@ -394,20 +398,20 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -# CONFIG_IP_NF_MATCH_ECN is not set +CONFIG_IP_NF_MATCH_ADDRTYPE=m # CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_TTL is not set -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_LOG is not set @@ -415,8 +419,8 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_IP_NF_TARGET_NETMAP is not set +CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_SCTP=m @@ -428,9 +432,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -440,6 +444,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -460,11 +465,10 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -772,7 +776,7 @@ CONFIG_TUN=m # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -792,8 +796,12 @@ CONFIG_TULIP_MMIO=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -816,18 +824,22 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -892,6 +904,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # @@ -1091,6 +1104,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1138,12 +1162,18 @@ CONFIG_HID=m # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1160,6 +1190,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1183,6 +1215,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1190,6 +1224,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1274,6 +1309,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1291,7 +1327,9 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1337,12 +1375,15 @@ CONFIG_RTC_DRV_RS5C372=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1351,6 +1392,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1362,12 +1404,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -1409,6 +1452,7 @@ CONFIG_NTFS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1452,6 +1496,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1516,7 +1561,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1572,15 +1616,23 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1589,6 +1641,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1600,15 +1653,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1682,6 +1739,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index cc9eaba8c9c9..8d3c62324009 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Thu May 22 08:18:47 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:38 2008 # # CONFIG_PPC64 is not set @@ -15,13 +15,14 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set +CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -82,7 +87,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -90,6 +94,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -99,17 +104,22 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -119,6 +129,7 @@ CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -133,18 +144,21 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC_82xx=y -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +CONFIG_PPC_82xx=y # CONFIG_MPC8272_ADS is not set # CONFIG_PQ2FADS is not set # CONFIG_EP8248E is not set @@ -152,19 +166,28 @@ CONFIG_MGCOGE=y # CONFIG_PQ2ADS is not set CONFIG_8260=y CONFIG_8272=y +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -172,7 +195,6 @@ CONFIG_CPM=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -186,6 +208,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -195,17 +219,19 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -213,13 +239,22 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCI_8260=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set # @@ -235,10 +270,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -276,7 +307,6 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -290,10 +320,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -314,11 +346,10 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -398,11 +429,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -422,19 +455,26 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -448,14 +488,25 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# A new alternative FireWire stack is available with EXPERIMENTAL=y +# +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set +# CONFIG_ARCNET is not set CONFIG_PHYLIB=y # @@ -475,17 +526,31 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y # CONFIG_FS_ENET_HAS_FCC is not set # CONFIG_FS_ENET_MDIO_FCC is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set # # Wireless LAN @@ -494,6 +559,7 @@ CONFIG_FS_ENET_HAS_SCC=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NETPOLL is not set @@ -530,29 +596,47 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set +CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -564,8 +648,18 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -586,6 +680,8 @@ CONFIG_SSB_POSSIBLE=y # # Graphics support # +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set @@ -595,19 +691,17 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -617,11 +711,13 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -651,6 +747,7 @@ CONFIG_AUTOFS4_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -673,6 +770,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -682,8 +780,8 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -759,9 +857,9 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -804,20 +902,41 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_KGDB_CONSOLE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set CONFIG_BDI_SWITCH=y +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -825,13 +944,19 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -865,6 +990,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -894,7 +1023,12 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 3cd6ce4be827..fbaa67f7b0ef 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Wed May 21 13:30:33 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:39 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_8xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -99,6 +100,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -106,10 +108,13 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -120,6 +125,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -134,12 +140,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y @@ -158,6 +163,7 @@ CONFIG_PPC_MGSUVD=y # Generic MPC8xx Options # CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_GPIO is not set CONFIG_8xx_CPU6=y CONFIG_8xx_CPU15=y # CONFIG_NO_UCODE_PATCH is not set @@ -177,7 +183,7 @@ CONFIG_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -CONFIG_PPC_CPM_NEW_BINDING=y +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -185,7 +191,6 @@ CONFIG_CPM=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -199,6 +204,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -213,17 +220,19 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -255,10 +264,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -309,6 +314,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -329,11 +335,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -447,6 +452,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -462,7 +468,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -492,6 +497,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y @@ -546,12 +554,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -# CONFIG_SERIAL_CPM_SMC2 is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -564,10 +566,13 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -579,8 +584,18 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -610,10 +625,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -624,6 +635,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -637,13 +649,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -673,6 +686,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -703,6 +717,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -713,13 +728,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -756,9 +771,9 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -783,7 +798,17 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -793,12 +818,14 @@ CONFIG_DEBUG_FS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -836,6 +863,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -866,7 +897,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index ab5199f26a24..f80b1ca43afb 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:06 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:40 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -104,7 +104,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -117,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -147,6 +145,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -204,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -218,15 +219,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -247,7 +248,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -315,6 +316,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -335,11 +337,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -576,6 +577,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -600,6 +604,7 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -622,18 +627,22 @@ CONFIG_TSI108_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -766,6 +775,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -801,6 +818,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -817,6 +840,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -826,6 +850,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -837,12 +862,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -872,6 +898,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -906,6 +933,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -942,7 +970,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -972,13 +999,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -990,12 +1019,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1067,6 +1098,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index ff6f7c475f47..c8f5dec1b696 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:07 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:41 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -48,13 +48,11 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y +# CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -93,7 +91,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -103,7 +100,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -116,10 +115,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -145,6 +141,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -152,16 +149,17 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_PPC_82xx=y CONFIG_MPC8272_ADS=y # CONFIG_PQ2FADS is not set # CONFIG_EP8248E is not set +# CONFIG_MGCOGE is not set CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_8272=y @@ -169,23 +167,19 @@ CONFIG_PQ2_ADS_PCI_PIC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -208,6 +202,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -217,15 +213,15 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -237,7 +233,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -249,7 +244,7 @@ CONFIG_PCI_8260=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -305,7 +300,6 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -332,10 +326,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -362,11 +358,10 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -472,7 +467,6 @@ CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -537,8 +531,6 @@ CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -549,8 +541,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -573,18 +569,23 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -645,6 +646,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -684,21 +686,12 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -CONFIG_SERIAL_CPM_SCC4=y -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -747,6 +740,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -788,6 +789,7 @@ CONFIG_DAB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -799,11 +801,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -833,6 +837,7 @@ CONFIG_AUTOFS4_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -935,7 +940,6 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -989,15 +993,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1005,6 +1017,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y @@ -1016,14 +1029,19 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1090,6 +1108,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 991c9bda12a9..15eb30c9b3f9 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 07:16:25 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:42 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -55,8 +55,6 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y CONFIG_REDBOOT=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -101,7 +99,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -111,7 +108,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -124,10 +123,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +155,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -167,10 +163,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -193,31 +189,27 @@ CONFIG_PPC_MPC834x=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -231,6 +223,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -246,15 +240,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,7 +260,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -281,7 +274,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -349,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -369,11 +363,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -488,7 +481,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -590,8 +582,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -696,8 +686,6 @@ CONFIG_ICPLUS_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -708,8 +696,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -736,18 +728,22 @@ CONFIG_UCC_GETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -782,7 +778,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -833,15 +829,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -879,12 +872,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -924,6 +911,7 @@ CONFIG_I2C_MPC=y # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -963,7 +951,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1018,7 +1005,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -1044,6 +1030,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1086,9 +1083,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1107,6 +1131,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1123,6 +1149,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1130,6 +1158,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1158,6 +1187,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1174,7 +1204,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1184,6 +1216,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1195,12 +1228,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1230,6 +1264,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1268,6 +1303,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1301,13 +1337,11 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y -CONFIG_QE_GPIO=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1335,13 +1369,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1353,16 +1389,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1435,6 +1474,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index f0a13bebf50c..c87b53abc617 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 07:15:20 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:43 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -111,7 +111,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -125,10 +127,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -161,6 +160,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -197,9 +197,11 @@ CONFIG_PPC_I8259=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set CONFIG_CPM2=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -219,6 +221,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -233,15 +237,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -265,7 +269,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -367,6 +371,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -387,12 +392,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -639,8 +643,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -664,18 +672,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -710,7 +722,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -902,7 +914,19 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -943,7 +967,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -960,6 +983,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -976,6 +1004,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -983,6 +1013,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1035,6 +1067,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1060,6 +1099,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1160,9 +1200,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1181,6 +1248,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1204,6 +1273,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set # @@ -1212,6 +1283,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1233,7 +1305,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1254,6 +1325,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1271,7 +1343,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1324,12 +1398,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1350,6 +1427,7 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA is not set # CONFIG_DMATEST is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1361,13 +1439,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1405,6 +1484,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1449,6 +1529,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1519,13 +1600,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -# CONFIG_QE_GPIO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1579,15 +1658,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1596,6 +1683,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_VIRQ_DEBUG=y @@ -1607,15 +1695,19 @@ CONFIG_VIRQ_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1688,6 +1780,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 1501c4336b3d..8272b1ac71f9 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:11 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:43 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_8xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -99,6 +99,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -112,10 +113,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -142,6 +140,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -154,6 +153,7 @@ CONFIG_MPC86XADS=y # CONFIG_MPC885ADS is not set # CONFIG_PPC_EP88XC is not set # CONFIG_PPC_ADDER875 is not set +# CONFIG_PPC_MGSUVD is not set # # MPC8xx CPM Options @@ -182,6 +182,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -203,6 +204,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -217,15 +220,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -311,6 +314,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -331,11 +335,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -412,6 +415,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y @@ -471,6 +477,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -510,12 +517,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -563,6 +564,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -596,6 +605,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -619,6 +634,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -632,12 +648,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -667,6 +684,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -703,6 +721,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -739,7 +758,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -769,12 +787,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -785,12 +805,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -862,6 +884,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_TALITOS is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 9d4be820cf1f..1736bbc281ec 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Tue Sep 23 23:28:38 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:44 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y @@ -23,7 +24,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -109,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -123,10 +126,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,7 +160,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y -# CONFIG_MPC8xxx_GPIO is not set +# CONFIG_FREEZER is not set # # Platform support @@ -196,7 +196,9 @@ CONFIG_PPC_I8259=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_FSL_ULI1575=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -216,6 +218,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -231,15 +235,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -263,7 +267,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -365,6 +369,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -385,12 +390,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -636,8 +640,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -660,18 +668,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -706,7 +718,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -875,6 +887,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -915,7 +938,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -932,6 +954,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -948,6 +975,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -955,6 +984,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1007,6 +1038,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1032,6 +1070,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1132,9 +1171,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1153,6 +1219,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1176,6 +1244,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1183,6 +1253,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1204,7 +1275,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1225,6 +1295,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1242,7 +1313,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1288,12 +1361,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1302,6 +1378,7 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1313,12 +1390,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1356,6 +1434,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1400,6 +1479,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1475,7 +1555,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1529,15 +1608,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1558,15 +1645,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1639,6 +1730,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index fc3f6dc58126..a4283b6a43d2 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:12 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:46 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_8xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -101,6 +101,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -114,10 +115,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -143,6 +141,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -155,6 +154,7 @@ CONFIG_CPM1=y CONFIG_MPC885ADS=y # CONFIG_PPC_EP88XC is not set # CONFIG_PPC_ADDER875 is not set +# CONFIG_PPC_MGSUVD is not set # # Freescale Ethernet driver platform-specific options @@ -190,6 +190,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -211,6 +212,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y @@ -226,15 +229,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -316,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -336,11 +340,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -486,6 +489,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -540,12 +546,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -581,6 +581,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -619,16 +627,18 @@ CONFIG_DAB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -657,6 +667,7 @@ CONFIG_DAB=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -694,6 +705,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -729,7 +741,6 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -779,14 +790,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -795,6 +814,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -805,6 +825,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 7e17862c38b8..228099d77c3b 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:13 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:47 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -48,13 +48,11 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y +# CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -94,7 +92,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -104,7 +101,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -117,10 +116,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -146,6 +142,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -153,39 +150,36 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_PPC_82xx=y # CONFIG_MPC8272_ADS is not set CONFIG_PQ2FADS=y # CONFIG_EP8248E is not set +# CONFIG_MGCOGE is not set CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_PQ2_ADS_PCI_PIC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -208,6 +202,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -217,15 +213,15 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -237,7 +233,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -250,7 +245,7 @@ CONFIG_PCI_8260=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -306,7 +301,6 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -333,10 +327,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -363,11 +359,10 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -473,7 +468,6 @@ CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -494,17 +488,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -539,7 +532,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_BLK_DEV_IDE_PMAC is not set # CONFIG_BLK_DEV_IDEDMA is not set # @@ -590,8 +582,6 @@ CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -602,8 +592,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -626,18 +620,23 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -698,6 +697,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -739,21 +739,12 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -CONFIG_SERIAL_CPM_SCC4=y -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -802,6 +793,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -850,20 +849,22 @@ CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y -# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set @@ -883,6 +884,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -894,11 +896,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -928,6 +932,7 @@ CONFIG_AUTOFS4_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1030,7 +1035,6 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1084,15 +1088,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1100,6 +1112,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y @@ -1111,14 +1124,19 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1185,6 +1203,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index 01b54eac1ff6..6046dc0cbd82 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:14 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:48 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -123,10 +125,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -210,6 +209,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -224,15 +225,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -253,7 +254,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -323,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -343,11 +345,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -478,17 +479,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -721,6 +721,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -745,11 +748,11 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -767,18 +770,22 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -813,7 +820,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=y # CONFIG_INPUT_POLLDEV is not set # @@ -1025,6 +1032,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1073,9 +1091,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1092,6 +1137,8 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1111,6 +1158,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1118,6 +1167,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1146,6 +1196,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1163,7 +1214,9 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1209,12 +1262,15 @@ CONFIG_RTC_DRV_MAX6900=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1223,6 +1279,7 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1234,12 +1291,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1269,6 +1327,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1304,6 +1363,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1340,7 +1400,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1370,13 +1429,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1388,12 +1449,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1465,6 +1528,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 4340cc1c5b6a..b3f5671972a9 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:16 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:48 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -102,7 +102,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -115,10 +117,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +149,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -190,13 +189,13 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -210,6 +209,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -224,15 +225,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -255,7 +256,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -318,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,11 +340,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -471,18 +472,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -605,6 +605,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -636,6 +637,7 @@ CONFIG_DUMMY=m # CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set +CONFIG_MII=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -658,6 +660,7 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -827,6 +830,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -877,6 +891,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -897,6 +913,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -904,6 +922,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -924,7 +943,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -945,6 +963,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -962,7 +981,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1008,12 +1029,15 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1022,6 +1046,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1033,12 +1058,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -1072,6 +1098,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1177,7 +1204,6 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1209,13 +1235,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1227,6 +1255,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y -- cgit v1.2.3 From 493890e75d98810a3470b4aae23be628ee5e9667 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 26 Oct 2008 12:37:25 +0100 Subject: mmc: increase SD write timeout for crappy cards It seems that some cards are slightly out of spec and occasionally will not be able to complete a write in the alloted 250 ms [1]. Incease the timeout slightly to allow even these cards to function properly. [1] http://lkml.org/lkml/2008/9/23/390 Signed-off-by: Pierre Ossman --- drivers/mmc/core/core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 044d84eeed7c..f7284b905eb3 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -280,7 +280,11 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) (card->host->ios.clock / 1000); if (data->flags & MMC_DATA_WRITE) - limit_us = 250000; + /* + * The limit is really 250 ms, but that is + * insufficient for some crappy cards. + */ + limit_us = 300000; else limit_us = 100000; -- cgit v1.2.3 From d1b268630875a7713b5d468a0c03403c5b721c8e Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 8 Nov 2008 21:37:46 +0100 Subject: mmc: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Signed-Off-By: Kay Sievers Signed-off-by: Pierre Ossman --- drivers/mmc/core/bus.c | 3 +-- drivers/mmc/core/host.c | 5 ++--- drivers/mmc/core/sdio_bus.c | 3 +-- drivers/mmc/host/mmc_spi.c | 2 +- drivers/mmc/host/sdhci.c | 2 +- drivers/mmc/host/tifm_sd.c | 16 ++++++++-------- include/linux/mmc/card.h | 2 +- include/linux/mmc/host.h | 2 +- include/linux/mmc/sdio_func.h | 2 +- 9 files changed, 17 insertions(+), 20 deletions(-) diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 0d9b2d6f9ebf..f210a8ee6861 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -216,8 +216,7 @@ int mmc_add_card(struct mmc_card *card) int ret; const char *type; - snprintf(card->dev.bus_id, sizeof(card->dev.bus_id), - "%s:%04x", mmc_hostname(card->host), card->rca); + dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca); switch (card->type) { case MMC_TYPE_MMC: diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 6da80fd4d974..5e945e64ead7 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -73,8 +73,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) if (err) goto free; - snprintf(host->class_dev.bus_id, BUS_ID_SIZE, - "mmc%d", host->index); + dev_set_name(&host->class_dev, "mmc%d", host->index); host->parent = dev; host->class_dev.parent = dev; @@ -121,7 +120,7 @@ int mmc_add_host(struct mmc_host *host) WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) && !host->ops->enable_sdio_irq); - led_trigger_register_simple(host->class_dev.bus_id, &host->led); + led_trigger_register_simple(dev_name(&host->class_dev), &host->led); err = device_add(&host->class_dev); if (err) diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 233d0f9b3c4b..46284b527397 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -239,8 +239,7 @@ int sdio_add_func(struct sdio_func *func) { int ret; - snprintf(func->dev.bus_id, sizeof(func->dev.bus_id), - "%s:%d", mmc_card_id(func->card), func->num); + dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num); ret = device_add(&func->dev); if (ret == 0) diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 07faf5412a1f..ad00e1632317 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1348,7 +1348,7 @@ static int mmc_spi_probe(struct spi_device *spi) goto fail_add_host; dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n", - mmc->class_dev.bus_id, + dev_name(&mmc->class_dev), host->dma_dev ? "" : ", no DMA", (host->pdata && host->pdata->get_ro) ? "" : ", no WP", diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 30f64b1f2354..4d010a984bed 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1733,7 +1733,7 @@ int sdhci_add_host(struct sdhci_host *host) mmc_add_host(mmc); printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n", - mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id, + mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)), (host->flags & SDHCI_USE_ADMA)?"A":"", (host->flags & SDHCI_USE_DMA)?"DMA":"PIO"); diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index 13844843e8de..82554ddec6b3 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -632,7 +632,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) if (host->req) { printk(KERN_ERR "%s : unfinished request detected\n", - sock->dev.bus_id); + dev_name(&sock->dev)); mrq->cmd->error = -ETIMEDOUT; goto err_out; } @@ -672,7 +672,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE)) { printk(KERN_ERR "%s : scatterlist map failed\n", - sock->dev.bus_id); + dev_name(&sock->dev)); mrq->cmd->error = -ENOMEM; goto err_out; } @@ -684,7 +684,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) : PCI_DMA_FROMDEVICE); if (host->sg_len < 1) { printk(KERN_ERR "%s : scatterlist map failed\n", - sock->dev.bus_id); + dev_name(&sock->dev)); tifm_unmap_sg(sock, &host->bounce_buf, 1, r_data->flags & MMC_DATA_WRITE ? PCI_DMA_TODEVICE @@ -748,7 +748,7 @@ static void tifm_sd_end_cmd(unsigned long data) if (!mrq) { printk(KERN_ERR " %s : no request to complete?\n", - sock->dev.bus_id); + dev_name(&sock->dev)); spin_unlock_irqrestore(&sock->lock, flags); return; } @@ -789,7 +789,7 @@ static void tifm_sd_abort(unsigned long data) printk(KERN_ERR "%s : card failed to respond for a long period of time " "(%x, %x)\n", - host->dev->dev.bus_id, host->req->cmd->opcode, host->cmd_flags); + dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags); tifm_eject(host->dev); } @@ -906,7 +906,7 @@ static int tifm_sd_initialize_host(struct tifm_sd *host) if (rc) { printk(KERN_ERR "%s : controller failed to reset\n", - sock->dev.bus_id); + dev_name(&sock->dev)); return -ENODEV; } @@ -933,7 +933,7 @@ static int tifm_sd_initialize_host(struct tifm_sd *host) if (rc) { printk(KERN_ERR "%s : card not ready - probe failed on initialization\n", - sock->dev.bus_id); + dev_name(&sock->dev)); return -ENODEV; } @@ -954,7 +954,7 @@ static int tifm_sd_probe(struct tifm_dev *sock) if (!(TIFM_SOCK_STATE_OCCUPIED & readl(sock->addr + SOCK_PRESENT_STATE))) { printk(KERN_WARNING "%s : card gone, unexpectedly\n", - sock->dev.bus_id); + dev_name(&sock->dev)); return rc; } diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index ee6e822d5994..403aa505f27e 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -130,7 +130,7 @@ struct mmc_card { #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) #define mmc_card_name(c) ((c)->cid.prod_name) -#define mmc_card_id(c) ((c)->dev.bus_id) +#define mmc_card_id(c) (dev_name(&(c)->dev)) #define mmc_list_to_card(l) container_of(l, struct mmc_card, node) #define mmc_get_drvdata(c) dev_get_drvdata(&(c)->dev) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index bde891f64591..f842f234e44f 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -176,7 +176,7 @@ static inline void *mmc_priv(struct mmc_host *host) #define mmc_dev(x) ((x)->parent) #define mmc_classdev(x) (&(x)->class_dev) -#define mmc_hostname(x) ((x)->class_dev.bus_id) +#define mmc_hostname(x) (dev_name(&(x)->class_dev)) extern int mmc_suspend_host(struct mmc_host *, pm_message_t); extern int mmc_resume_host(struct mmc_host *); diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index 07bee4a0d457..451bdfc85830 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -63,7 +63,7 @@ struct sdio_func { #define sdio_func_set_present(f) ((f)->state |= SDIO_STATE_PRESENT) -#define sdio_func_id(f) ((f)->dev.bus_id) +#define sdio_func_id(f) (dev_name(&(f)->dev)) #define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev) #define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d) -- cgit v1.2.3 From 72bc2b1ad62f4d2f0a51b35829093d41f55accce Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 8 Nov 2008 21:15:53 +0100 Subject: [ARM] 5329/1: Feroceon: fix feroceon_l2_inv_range Same fix as commit c7cf72dcadb: when 'start' and 'end' are less than a cacheline apart and 'start' is unaligned we are done after cleaning and invalidating the first cacheline. Cc: Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/cache-feroceon-l2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 13cdae8b0d44..80cd207cbaea 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -150,7 +150,7 @@ static void feroceon_l2_inv_range(unsigned long start, unsigned long end) /* * Clean and invalidate partial last cache line. */ - if (end & (CACHE_LINE_SIZE - 1)) { + if (start < end && end & (CACHE_LINE_SIZE - 1)) { l2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); end &= ~(CACHE_LINE_SIZE - 1); } @@ -158,7 +158,7 @@ static void feroceon_l2_inv_range(unsigned long start, unsigned long end) /* * Invalidate all full cache lines between 'start' and 'end'. */ - while (start != end) { + while (start < end) { unsigned long range_end = calc_range_end(start, end); l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE); start = range_end; -- cgit v1.2.3 From 0fded351a7d03fc69484d5a9e655fbd15a8e7dab Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 8 Nov 2008 19:14:56 +0000 Subject: [ARM] realview: correct MMC clock rate The MMC clock source is actually 24MHz, not 33MHz. Signed-off-by: Russell King --- arch/arm/mach-realview/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c index 3e706c57833a..3347c4236a60 100644 --- a/arch/arm/mach-realview/clock.c +++ b/arch/arm/mach-realview/clock.c @@ -104,7 +104,7 @@ static struct clk uart_clk = { static struct clk mmci_clk = { .name = "MCLK", - .rate = 33000000, + .rate = 24000000, }; int clk_register(struct clk *clk) -- cgit v1.2.3 From 7bfc0b2e266dd4cd3d3f27a3ad31bf79974190b1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 8 Nov 2008 20:12:36 +0000 Subject: [ARM] versatile: correct MMC clock rate The MMC clock source is actually 24MHz, not 33MHz. Signed-off-by: Russell King --- arch/arm/mach-versatile/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c index 9336508ec0b2..58937f1fb38c 100644 --- a/arch/arm/mach-versatile/clock.c +++ b/arch/arm/mach-versatile/clock.c @@ -105,7 +105,7 @@ static struct clk uart_clk = { static struct clk mmci_clk = { .name = "MCLK", - .rate = 33000000, + .rate = 24000000, }; int clk_register(struct clk *clk) -- cgit v1.2.3 From ebb4c65869db7213280ad9c510637683939b5ff8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 9 Nov 2008 11:18:36 +0000 Subject: [ARM] iop: iop3xx needs registers mapped uncached+unbuffered Mikael Pettersson reported: The 2.6.28-rc kernels fail to detect PCI device 0000:00:01.0 (the first ethernet port) on my Thecus n2100 XScale box. There is however still a strange "ghost" device that gets partially detected in 2.6.28-rc2 vanilla. The IOP321 manual says: The user designates the memory region containing the OCCDR as non-cacheable and non-bufferable from the IntelR XScaleTM core. This guarantees that all load/stores to the OCCDR are only of DWORD quantities. Ensure that the OCCDR is so mapped. Signed-off-by: Russell King --- arch/arm/include/asm/mach/map.h | 13 +++++++------ arch/arm/mm/mmu.c | 6 ++++++ arch/arm/plat-iop/setup.c | 5 +++-- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index cb1139ac1943..39d949b63e80 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -19,12 +19,13 @@ struct map_desc { }; /* types 0-3 are defined in asm/io.h */ -#define MT_CACHECLEAN 4 -#define MT_MINICLEAN 5 -#define MT_LOW_VECTORS 6 -#define MT_HIGH_VECTORS 7 -#define MT_MEMORY 8 -#define MT_ROM 9 +#define MT_UNCACHED 4 +#define MT_CACHECLEAN 5 +#define MT_MINICLEAN 6 +#define MT_LOW_VECTORS 7 +#define MT_HIGH_VECTORS 8 +#define MT_MEMORY 9 +#define MT_ROM 10 #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e63db11f16a8..7f36c825718d 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -208,6 +208,12 @@ static struct mem_type mem_types[] = { .prot_sect = PROT_SECT_DEVICE, .domain = DOMAIN_IO, }, + [MT_UNCACHED] = { + .prot_pte = PROT_PTE_DEVICE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, + .domain = DOMAIN_IO, + }, [MT_CACHECLEAN] = { .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, .domain = DOMAIN_KERNEL, diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c index 4689db638e95..9e573e78176a 100644 --- a/arch/arm/plat-iop/setup.c +++ b/arch/arm/plat-iop/setup.c @@ -16,14 +16,15 @@ #include /* - * Standard IO mapping for all IOP3xx based systems + * Standard IO mapping for all IOP3xx based systems. Note that + * the IOP3xx OCCDR must be mapped uncached and unbuffered. */ static struct map_desc iop3xx_std_desc[] __initdata = { { /* mem mapped registers */ .virtual = IOP3XX_PERIPHERAL_VIRT_BASE, .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE), .length = IOP3XX_PERIPHERAL_SIZE, - .type = MT_DEVICE, + .type = MT_UNCACHED, }, { /* PCI IO space */ .virtual = IOP3XX_PCI_LOWER_IO_VA, .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA), -- cgit v1.2.3 From 65b92e5cbc8acd14ea83190b4d016f765dce6075 Mon Sep 17 00:00:00 2001 From: Michel Marti Date: Sat, 8 Nov 2008 11:33:32 +0100 Subject: ALSA: hda - Add another HP model (6730s) for AD1884A Added model=laptop for another HP machine (103c:3614) with AD1884A codec. Signed-off-by: Michel Marti Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index d3fd432cb3ea..400df85a4457 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3861,6 +3861,7 @@ static const char *ad1884a_models[AD1884A_MODELS] = { static struct snd_pci_quirk ad1884a_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x3030, "HP", AD1884A_MOBILE), SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE), + SND_PCI_QUIRK(0x103c, 0x3614, "HP 6730s", AD1884A_LAPTOP), SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD), {} }; -- cgit v1.2.3 From 00c9ddd1d4cc73aa0077f379279d716cb0ab0ba5 Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Sun, 9 Nov 2008 12:50:52 +0100 Subject: ALSA: HDSP: check for io box before uploading firmware currently the hdsp driver tries to upload the firmware, even if the io box is not connected. this patch adds a check for the io box before trying to upload the firmware. thus instead of messages complaining about the fifo status and firmware loading failure, the driver gives a message that no multiface or digiface is connected. [A minor coding-style fix by tiwai] Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdsp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index d723543beadd..d680114b3e44 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -5045,6 +5045,10 @@ static int __devinit snd_hdsp_create(struct snd_card *card, /* we wait 2 seconds to let freshly inserted cardbus cards do their hardware init */ ssleep(2); + err = hdsp_check_for_iobox(hdsp); + if (err < 0) + return err; + if ((hdsp_read (hdsp, HDSP_statusRegister) & HDSP_DllError) != 0) { #ifdef HDSP_FW_LOADER if ((err = hdsp_request_fw_loader(hdsp)) < 0) @@ -5057,7 +5061,7 @@ static int __devinit snd_hdsp_create(struct snd_card *card, /* init is complete, we return */ return 0; #endif - /* no iobox connected, we defer initialization */ + /* we defer initialization */ snd_printk(KERN_INFO "Hammerfall-DSP: card initialization pending : waiting for firmware\n"); if ((err = snd_hdsp_create_hwdep(card, hdsp)) < 0) return err; -- cgit v1.2.3 From 3ae7e2e22900b90bbe1d19454405950893c110be Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Sat, 8 Nov 2008 14:42:18 +0100 Subject: ALSA: hdsp: check for iobox and upload firmware during ioctl currently, the error message when trying to run hdspmixer or hdspconf if the breakout box is not connected is somehow misleading, since it asks the user to upload the firmware. this patch adds a test, whether the breakout box is connected and tries to upload the firmware in the case, that it is not present, e.g. because of power failures of the breakout box. [Minor coding-style fixes by tiwai] Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdsp.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index d680114b3e44..736246f98acc 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -4548,11 +4548,20 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne { struct hdsp *hdsp = (struct hdsp *)hw->private_data; void __user *argp = (void __user *)arg; + int err; switch (cmd) { case SNDRV_HDSP_IOCTL_GET_PEAK_RMS: { struct hdsp_peak_rms __user *peak_rms = (struct hdsp_peak_rms __user *)arg; + err = hdsp_check_for_iobox(hdsp); + if (err < 0) + return err; + + err = hdsp_check_for_firmware(hdsp, 1); + if (err < 0) + return err; + if (!(hdsp->state & HDSP_FirmwareLoaded)) { snd_printk(KERN_ERR "Hammerfall-DSP: firmware needs to be uploaded to the card.\n"); return -EINVAL; @@ -4572,10 +4581,14 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne unsigned long flags; int i; - if (!(hdsp->state & HDSP_FirmwareLoaded)) { - snd_printk(KERN_ERR "Hammerfall-DSP: Firmware needs to be uploaded to the card.\n"); - return -EINVAL; - } + err = hdsp_check_for_iobox(hdsp); + if (err < 0) + return err; + + err = hdsp_check_for_firmware(hdsp, 1); + if (err < 0) + return err; + spin_lock_irqsave(&hdsp->lock, flags); info.pref_sync_ref = (unsigned char)hdsp_pref_sync_ref(hdsp); info.wordclock_sync_check = (unsigned char)hdsp_wc_sync_check(hdsp); -- cgit v1.2.3 From bbda14dfba26bd4ca5dc74f672518bc42120d765 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 30 Oct 2008 15:57:05 +0100 Subject: regulator: Use menuconfig in Kconfig Use menuconfig instead of flat configs so that you can disable/enable regulator items with one selection. Also, use depends instead of reverse selections to make life easier, too. Signed-off-by: Takashi Iwai Signed-off-by: Liam Girdwood --- drivers/regulator/Kconfig | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 4dada6ee1119..39360e2a4540 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1,6 +1,4 @@ -menu "Voltage and Current regulators" - -config REGULATOR +menuconfig REGULATOR bool "Voltage and Current Regulator Support" default n help @@ -23,21 +21,20 @@ config REGULATOR If unsure, say no. +if REGULATOR + config REGULATOR_DEBUG bool "Regulator debug support" - depends on REGULATOR help Say yes here to enable debugging support. config REGULATOR_FIXED_VOLTAGE tristate default n - select REGULATOR config REGULATOR_VIRTUAL_CONSUMER tristate "Virtual regulator consumer support" default n - select REGULATOR help This driver provides a virtual consumer for the voltage and current regulator API which provides sysfs controls for @@ -49,7 +46,6 @@ config REGULATOR_VIRTUAL_CONSUMER config REGULATOR_BQ24022 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" default n - select REGULATOR help This driver controls a TI bq24022 Charger attached via GPIOs. The provided current regulator can enable/disable @@ -59,7 +55,6 @@ config REGULATOR_BQ24022 config REGULATOR_WM8350 tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC" depends on MFD_WM8350 - select REGULATOR help This driver provides support for the voltage and current regulators of the WM8350 AudioPlus PMIC. @@ -67,7 +62,6 @@ config REGULATOR_WM8350 config REGULATOR_WM8400 tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC" depends on MFD_WM8400 - select REGULATOR help This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. @@ -75,9 +69,8 @@ config REGULATOR_WM8400 config REGULATOR_DA903X tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" depends on PMIC_DA903X - select REGULATOR help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. -endmenu +endif -- cgit v1.2.3 From 3044646148cdfa83a311bf1c146a70e550280159 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 9 Nov 2008 10:07:58 -0800 Subject: x86: move iomap.h to the new include location a new file was accidentally added to include/asm-x86; move it to the new arch/x86/include/asm location Signed-off-by: Arjan van de Ven --- arch/x86/include/asm/iomap.h | 30 ++++++++++++++++++++++++++++++ include/asm-x86/iomap.h | 30 ------------------------------ 2 files changed, 30 insertions(+), 30 deletions(-) create mode 100644 arch/x86/include/asm/iomap.h delete mode 100644 include/asm-x86/iomap.h diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h new file mode 100644 index 000000000000..c1f06289b14b --- /dev/null +++ b/arch/x86/include/asm/iomap.h @@ -0,0 +1,30 @@ +/* + * Copyright © 2008 Ingo Molnar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#include +#include +#include +#include +#include +#include + +void * +iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot); + +void +iounmap_atomic(void *kvaddr, enum km_type type); diff --git a/include/asm-x86/iomap.h b/include/asm-x86/iomap.h deleted file mode 100644 index c1f06289b14b..000000000000 --- a/include/asm-x86/iomap.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright © 2008 Ingo Molnar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - */ - -#include -#include -#include -#include -#include -#include - -void * -iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot); - -void -iounmap_atomic(void *kvaddr, enum km_type type); -- cgit v1.2.3 From 058e3739f6b0753696db1952378de9e8d2a11735 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sun, 9 Nov 2008 00:27:53 -0500 Subject: clarify usage expectations for cnt32_to_63() Currently, all existing users of cnt32_to_63() are fine since the CPU architectures where it is used don't do read access reordering, and user mode preemption is disabled already. It is nevertheless a good idea to better elaborate usage requirements wrt preemption, and use an explicit memory barrier on SMP to avoid different CPUs accessing the counter value in the wrong order. On UP a simple compiler barrier is sufficient. Signed-off-by: Nicolas Pitre Acked-by: Mathieu Desnoyers Signed-off-by: Linus Torvalds --- include/linux/cnt32_to_63.h | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h index 8c0f9505b48c..7605fdd1eb65 100644 --- a/include/linux/cnt32_to_63.h +++ b/include/linux/cnt32_to_63.h @@ -16,6 +16,7 @@ #include #include #include +#include /* this is used only to give gcc a clue about good code generation */ union cnt32_to_63 { @@ -53,11 +54,19 @@ union cnt32_to_63 { * needed increment. And any race in updating the value in memory is harmless * as the same value would simply be stored more than once. * - * The only restriction for the algorithm to work properly is that this - * code must be executed at least once per each half period of the 32-bit - * counter to properly update the state bit in memory. This is usually not a - * problem in practice, but if it is then a kernel timer could be scheduled - * to manage for this code to be executed often enough. + * The restrictions for the algorithm to work properly are: + * + * 1) this code must be called at least once per each half period of the + * 32-bit counter; + * + * 2) this code must not be preempted for a duration longer than the + * 32-bit counter half period minus the longest period between two + * calls to this code. + * + * Those requirements ensure proper update to the state bit in memory. + * This is usually not a problem in practice, but if it is then a kernel + * timer should be scheduled to manage for this code to be executed often + * enough. * * Note that the top bit (bit 63) in the returned value should be considered * as garbage. It is not cleared here because callers are likely to use a @@ -68,9 +77,10 @@ union cnt32_to_63 { */ #define cnt32_to_63(cnt_lo) \ ({ \ - static volatile u32 __m_cnt_hi; \ + static u32 __m_cnt_hi; \ union cnt32_to_63 __x; \ __x.hi = __m_cnt_hi; \ + smp_rmb(); \ __x.lo = (cnt_lo); \ if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ -- cgit v1.2.3 From 6209344f5a3795d34b7f2c0061f49802283b6bdd Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Sun, 9 Nov 2008 15:23:57 +0100 Subject: net: unix: fix inflight counting bug in garbage collector Previously I assumed that the receive queues of candidates don't change during the GC. This is only half true, nothing can be received from the queues (see comment in unix_gc()), but buffers could be added through the other half of the socket pair, which may still have file descriptors referring to it. This can result in inc_inflight_move_tail() erronously increasing the "inflight" counter for a unix socket for which dec_inflight() wasn't previously called. This in turn can trigger the "BUG_ON(total_refs < inflight_refs)" in a later garbage collection run. Fix this by only manipulating the "inflight" counter for sockets which are candidates themselves. Duplicating the file references in unix_attach_fds() is also needed to prevent a socket becoming a candidate for GC while the skb that contains it is not yet queued. Reported-by: Andrea Bittau Signed-off-by: Miklos Szeredi CC: stable@kernel.org Signed-off-by: Linus Torvalds --- include/net/af_unix.h | 1 + net/unix/af_unix.c | 31 ++++++++++++++++++++++++------- net/unix/garbage.c | 49 +++++++++++++++++++++++++++++++++++++------------ 3 files changed, 62 insertions(+), 19 deletions(-) diff --git a/include/net/af_unix.h b/include/net/af_unix.h index 7dd29b7e461d..c29ff1da8a18 100644 --- a/include/net/af_unix.h +++ b/include/net/af_unix.h @@ -54,6 +54,7 @@ struct unix_sock { atomic_long_t inflight; spinlock_t lock; unsigned int gc_candidate : 1; + unsigned int gc_maybe_cycle : 1; wait_queue_head_t peer_wait; }; #define unix_sk(__sk) ((struct unix_sock *)__sk) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 4d3c6071b9a4..eb90f77bb0e2 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1302,14 +1302,23 @@ static void unix_destruct_fds(struct sk_buff *skb) sock_wfree(skb); } -static void unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb) +static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb) { int i; + + /* + * Need to duplicate file references for the sake of garbage + * collection. Otherwise a socket in the fps might become a + * candidate for GC while the skb is not yet queued. + */ + UNIXCB(skb).fp = scm_fp_dup(scm->fp); + if (!UNIXCB(skb).fp) + return -ENOMEM; + for (i=scm->fp->count-1; i>=0; i--) unix_inflight(scm->fp->fp[i]); - UNIXCB(skb).fp = scm->fp; skb->destructor = unix_destruct_fds; - scm->fp = NULL; + return 0; } /* @@ -1368,8 +1377,11 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock, goto out; memcpy(UNIXCREDS(skb), &siocb->scm->creds, sizeof(struct ucred)); - if (siocb->scm->fp) - unix_attach_fds(siocb->scm, skb); + if (siocb->scm->fp) { + err = unix_attach_fds(siocb->scm, skb); + if (err) + goto out_free; + } unix_get_secdata(siocb->scm, skb); skb_reset_transport_header(skb); @@ -1538,8 +1550,13 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock, size = min_t(int, size, skb_tailroom(skb)); memcpy(UNIXCREDS(skb), &siocb->scm->creds, sizeof(struct ucred)); - if (siocb->scm->fp) - unix_attach_fds(siocb->scm, skb); + if (siocb->scm->fp) { + err = unix_attach_fds(siocb->scm, skb); + if (err) { + kfree_skb(skb); + goto out_err; + } + } if ((err = memcpy_fromiovec(skb_put(skb,size), msg->msg_iov, size)) != 0) { kfree_skb(skb); diff --git a/net/unix/garbage.c b/net/unix/garbage.c index 2a27b84f740b..6d4a9a8de5ef 100644 --- a/net/unix/garbage.c +++ b/net/unix/garbage.c @@ -186,8 +186,17 @@ static void scan_inflight(struct sock *x, void (*func)(struct unix_sock *), */ struct sock *sk = unix_get_socket(*fp++); if (sk) { - hit = true; - func(unix_sk(sk)); + struct unix_sock *u = unix_sk(sk); + + /* + * Ignore non-candidates, they could + * have been added to the queues after + * starting the garbage collection + */ + if (u->gc_candidate) { + hit = true; + func(u); + } } } if (hit && hitlist != NULL) { @@ -249,11 +258,11 @@ static void inc_inflight_move_tail(struct unix_sock *u) { atomic_long_inc(&u->inflight); /* - * If this is still a candidate, move it to the end of the - * list, so that it's checked even if it was already passed - * over + * If this still might be part of a cycle, move it to the end + * of the list, so that it's checked even if it was already + * passed over */ - if (u->gc_candidate) + if (u->gc_maybe_cycle) list_move_tail(&u->link, &gc_candidates); } @@ -267,6 +276,7 @@ void unix_gc(void) struct unix_sock *next; struct sk_buff_head hitlist; struct list_head cursor; + LIST_HEAD(not_cycle_list); spin_lock(&unix_gc_lock); @@ -282,10 +292,14 @@ void unix_gc(void) * * Holding unix_gc_lock will protect these candidates from * being detached, and hence from gaining an external - * reference. This also means, that since there are no - * possible receivers, the receive queues of these sockets are - * static during the GC, even though the dequeue is done - * before the detach without atomicity guarantees. + * reference. Since there are no possible receivers, all + * buffers currently on the candidates' queues stay there + * during the garbage collection. + * + * We also know that no new candidate can be added onto the + * receive queues. Other, non candidate sockets _can_ be + * added to queue, so we must make sure only to touch + * candidates. */ list_for_each_entry_safe(u, next, &gc_inflight_list, link) { long total_refs; @@ -299,6 +313,7 @@ void unix_gc(void) if (total_refs == inflight_refs) { list_move_tail(&u->link, &gc_candidates); u->gc_candidate = 1; + u->gc_maybe_cycle = 1; } } @@ -325,13 +340,23 @@ void unix_gc(void) list_move(&cursor, &u->link); if (atomic_long_read(&u->inflight) > 0) { - list_move_tail(&u->link, &gc_inflight_list); - u->gc_candidate = 0; + list_move_tail(&u->link, ¬_cycle_list); + u->gc_maybe_cycle = 0; scan_children(&u->sk, inc_inflight_move_tail, NULL); } } list_del(&cursor); + /* + * not_cycle_list contains those sockets which do not make up a + * cycle. Restore these to the inflight list. + */ + while (!list_empty(¬_cycle_list)) { + u = list_entry(not_cycle_list.next, struct unix_sock, link); + u->gc_candidate = 0; + list_move_tail(&u->link, &gc_inflight_list); + } + /* * Now gc_candidates contains only garbage. Restore original * inflight counters for these as well, and remove the skbuffs -- cgit v1.2.3 From 984f2f377fdfd098f5ae58d09ee04d5e29e6112b Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 8 Nov 2008 20:24:19 +1100 Subject: cpumask: introduce new API, without changing anything, v3 Impact: cleanup Clean up based on feedback from Andrew Morton and others: - change to inline functions instead of macros - add __init to bootmem method - add a missing debug check Signed-off-by: Rusty Russell Signed-off-by: Ingo Molnar --- include/linux/cpumask.h | 58 ++++++++++++++++++++++++++++++++++++++++++++----- lib/cpumask.c | 3 ++- 2 files changed, 54 insertions(+), 7 deletions(-) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 31caa1bc620a..21e1dd43e52a 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -564,12 +564,36 @@ static inline unsigned int cpumask_check(unsigned int cpu) } #if NR_CPUS == 1 -/* Uniprocesor. */ -#define cpumask_first(src) ({ (void)(src); 0; }) -#define cpumask_next(n, src) ({ (void)(src); 1; }) -#define cpumask_next_zero(n, src) ({ (void)(src); 1; }) -#define cpumask_next_and(n, srcp, andp) ({ (void)(srcp), (void)(andp); 1; }) -#define cpumask_any_but(mask, cpu) ({ (void)(mask); (void)(cpu); 0; }) +/* Uniprocessor. Assume all masks are "1". */ +static inline unsigned int cpumask_first(const struct cpumask *srcp) +{ + return 0; +} + +/* Valid inputs for n are -1 and 0. */ +static inline unsigned int cpumask_next(int n, const struct cpumask *srcp) +{ + return n+1; +} + +static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp) +{ + return n+1; +} + +static inline unsigned int cpumask_next_and(int n, + const struct cpumask *srcp, + const struct cpumask *andp) +{ + return n+1; +} + +/* cpu must be a valid cpu, ie 0, so there's no other choice. */ +static inline unsigned int cpumask_any_but(const struct cpumask *mask, + unsigned int cpu) +{ + return 1; +} #define for_each_cpu(cpu, mask) \ for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) @@ -620,10 +644,32 @@ static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp) int cpumask_next_and(int n, const struct cpumask *, const struct cpumask *); int cpumask_any_but(const struct cpumask *mask, unsigned int cpu); +/** + * for_each_cpu - iterate over every cpu in a mask + * @cpu: the (optionally unsigned) integer iterator + * @mask: the cpumask pointer + * + * After the loop, cpu is >= nr_cpu_ids. + */ #define for_each_cpu(cpu, mask) \ for ((cpu) = -1; \ (cpu) = cpumask_next((cpu), (mask)), \ (cpu) < nr_cpu_ids;) + +/** + * for_each_cpu_and - iterate over every cpu in both masks + * @cpu: the (optionally unsigned) integer iterator + * @mask: the first cpumask pointer + * @and: the second cpumask pointer + * + * This saves a temporary CPU mask in many places. It is equivalent to: + * struct cpumask tmp; + * cpumask_and(&tmp, &mask, &and); + * for_each_cpu(cpu, &tmp) + * ... + * + * After the loop, cpu is >= nr_cpu_ids. + */ #define for_each_cpu_and(cpu, mask, and) \ for ((cpu) = -1; \ (cpu) = cpumask_next_and((cpu), (mask), (and)), \ diff --git a/lib/cpumask.c b/lib/cpumask.c index 2ebc3a9a7465..8d03f22c6ced 100644 --- a/lib/cpumask.c +++ b/lib/cpumask.c @@ -67,6 +67,7 @@ int cpumask_any_but(const struct cpumask *mask, unsigned int cpu) { unsigned int i; + cpumask_check(cpu); for_each_cpu(i, mask) if (i != cpu) break; @@ -108,7 +109,7 @@ void free_cpumask_var(cpumask_var_t mask) } EXPORT_SYMBOL(free_cpumask_var); -void free_bootmem_cpumask_var(cpumask_var_t mask) +void __init free_bootmem_cpumask_var(cpumask_var_t mask) { free_bootmem((unsigned long)mask, cpumask_size()); } -- cgit v1.2.3 From b726e923ea4d216027e466aa602d914e4b4a63af Mon Sep 17 00:00:00 2001 From: Doug Nazar Date: Wed, 5 Nov 2008 06:16:28 -0500 Subject: Fix nfsd truncation of readdir results Commit 8d7c4203 "nfsd: fix failure to set eof in readdir in some situations" introduced a bug: on a directory in an exported ext3 filesystem with dir_index unset, a READDIR will only return about 250 entries, even if the directory was larger. Bisected it back to this commit; reverting it fixes the problem. It turns out that in this case ext3 reads a block at a time, then returns from readdir, which means we can end up with buf.full==0 but with more entries in the directory still to be read. Before 8d7c4203 (but after c002a6c797 "Optimise NFS readdir hack slightly"), this would cause us to return the READDIR result immediately, but with the eof bit unset. That could cause a performance regression (because the client would need more roundtrips to the server to read the whole directory), but no loss in correctness, since the cleared eof bit caused the client to send another readdir. After 8d7c4203, the setting of the eof bit made this a correctness problem. So, move nfserr_eof into the loop and remove the buf.full check so that we loop until buf.used==0. The following seems to do the right thing and reduces the network traffic since we don't return a READDIR result until the buffer is full. Tested on an empty directory & large directory; eof is properly sent and there are no more short buffers. Signed-off-by: Doug Nazar Cc: David Woodhouse Cc: Al Viro Signed-off-by: J. Bruce Fields --- fs/nfsd/vfs.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 848a03e83a42..4433c8f00163 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -1875,11 +1875,11 @@ static int nfsd_buffered_readdir(struct file *file, filldir_t func, return -ENOMEM; offset = *offsetp; - cdp->err = nfserr_eof; /* will be cleared on successful read */ while (1) { unsigned int reclen; + cdp->err = nfserr_eof; /* will be cleared on successful read */ buf.used = 0; buf.full = 0; @@ -1912,9 +1912,6 @@ static int nfsd_buffered_readdir(struct file *file, filldir_t func, de = (struct buffered_dirent *)((char *)de + reclen); } offset = vfs_llseek(file, 0, SEEK_CUR); - cdp->err = nfserr_eof; - if (!buf.full) - break; } done: -- cgit v1.2.3 From 980fc29f20f5cfb8cef29ddfccecb685f299ada4 Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Thu, 6 Nov 2008 11:44:34 +0100 Subject: pcmcia: add another pata/ide ID Support for Apacer photo steno pro card. Signed-off-by: Marc Pignat Signed-off-by: Dominik Brodowski CC: Alan Cox Date: Sun, 9 Nov 2008 12:47:04 -0800 Subject: Don't ask twice about not including staging drivers The "Exclude staging drivers" question is there so that we don't build staging drivers for allyesconfig or allnoconfig settings, but it's very irritating when you've already said "no" to staging drivers earlier. There is absolutely no point in declining twice - once you've declined the staging drivers, you're done. So make the second question depend on the first question having been answered in the affirmative. Signed-off-by: Linus Torvalds --- drivers/staging/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 0a49cd788a75..c95b286a1239 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -23,7 +23,7 @@ menuconfig STAGING config STAGING_EXCLUDE_BUILD - bool "Exclude Staging drivers from being built" + bool "Exclude Staging drivers from being built" if STAGING default y ---help--- Are you sure you really want to build the staging drivers? -- cgit v1.2.3 From b1769450da0eeae2d95aae5496acbdf4c6ba89b2 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 9 Nov 2008 21:47:47 +0100 Subject: pcmcia: ensure correct logging in do_io_probe Signed-off-by: Dominik Brodowski --- drivers/pcmcia/cs.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 5d0e60e09d31..0660ad182589 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -186,12 +186,6 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) spin_lock_init(&socket->lock); - if (socket->resource_ops->init) { - ret = socket->resource_ops->init(socket); - if (ret) - return (ret); - } - /* try to obtain a socket number [yes, it gets ugly if we * register more than 2^sizeof(unsigned int) pcmcia * sockets... but the socket number is deprecated @@ -239,6 +233,12 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) mutex_init(&socket->skt_mutex); spin_lock_init(&socket->thread_lock); + if (socket->resource_ops->init) { + ret = socket->resource_ops->init(socket); + if (ret) + goto err; + } + tsk = kthread_run(pccardd, socket, "pccardd"); if (IS_ERR(tsk)) { ret = PTR_ERR(tsk); -- cgit v1.2.3 From f6d87f4bd259cf33e092cd1a8fde05f291c47af1 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 7 Nov 2008 13:18:30 +0100 Subject: genirq: keep affinities set from userspace across free/request_irq() Impact: preserve user-modified affinities on interrupts Kumar Galak noticed that commit 18404756765c713a0be4eb1082920c04822ce588 (genirq: Expose default irq affinity mask (take 3)) overrides an already set affinity setting across a free / request_irq(). Happens e.g. with ifdown/ifup of a network device. Change the logic to mark the affinities as set and keep them intact. This also fixes the unlocked access to irq_desc in irq_select_affinity() when called from irq_affinity_proc_write() Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/linux/irq.h | 8 ++----- kernel/irq/internals.h | 2 ++ kernel/irq/manage.c | 58 +++++++++++++++++++++++++++++++++++++++++--------- kernel/irq/migration.c | 11 ---------- kernel/irq/proc.c | 2 +- 5 files changed, 53 insertions(+), 28 deletions(-) diff --git a/include/linux/irq.h b/include/linux/irq.h index d058c57be02d..36b186eb318b 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -63,7 +63,8 @@ typedef void (*irq_flow_handler_t)(unsigned int irq, #define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */ #define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */ #define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */ -#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */ +#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */ +#define IRQ_AFFINITY_SET 0x02000000 /* IRQ affinity was set from userspace*/ #ifdef CONFIG_IRQ_PER_CPU # define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU) @@ -210,7 +211,6 @@ extern int setup_irq(unsigned int irq, struct irqaction *new); #ifdef CONFIG_GENERIC_PENDING_IRQ -void set_pending_irq(unsigned int irq, cpumask_t mask); void move_native_irq(int irq); void move_masked_irq(int irq); @@ -228,10 +228,6 @@ static inline void move_masked_irq(int irq) { } -static inline void set_pending_irq(unsigned int irq, cpumask_t mask) -{ -} - #endif /* CONFIG_GENERIC_PENDING_IRQ */ #else /* CONFIG_SMP */ diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h index c9767e641980..64c1c7253dae 100644 --- a/kernel/irq/internals.h +++ b/kernel/irq/internals.h @@ -25,6 +25,8 @@ static inline void unregister_handler_proc(unsigned int irq, struct irqaction *action) { } #endif +extern int irq_select_affinity_usr(unsigned int irq); + /* * Debugging printout: */ diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index c498a1b8c621..634a2a955104 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -82,24 +82,27 @@ int irq_can_set_affinity(unsigned int irq) int irq_set_affinity(unsigned int irq, cpumask_t cpumask) { struct irq_desc *desc = irq_to_desc(irq); + unsigned long flags; if (!desc->chip->set_affinity) return -EINVAL; + spin_lock_irqsave(&desc->lock, flags); + #ifdef CONFIG_GENERIC_PENDING_IRQ if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) { - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); desc->affinity = cpumask; desc->chip->set_affinity(irq, cpumask); - spin_unlock_irqrestore(&desc->lock, flags); - } else - set_pending_irq(irq, cpumask); + } else { + desc->status |= IRQ_MOVE_PENDING; + desc->pending_mask = cpumask; + } #else desc->affinity = cpumask; desc->chip->set_affinity(irq, cpumask); #endif + desc->status |= IRQ_AFFINITY_SET; + spin_unlock_irqrestore(&desc->lock, flags); return 0; } @@ -107,24 +110,59 @@ int irq_set_affinity(unsigned int irq, cpumask_t cpumask) /* * Generic version of the affinity autoselector. */ -int irq_select_affinity(unsigned int irq) +int do_irq_select_affinity(unsigned int irq, struct irq_desc *desc) { cpumask_t mask; - struct irq_desc *desc; if (!irq_can_set_affinity(irq)) return 0; cpus_and(mask, cpu_online_map, irq_default_affinity); - desc = irq_to_desc(irq); + /* + * Preserve an userspace affinity setup, but make sure that + * one of the targets is online. + */ + if (desc->status & IRQ_AFFINITY_SET) { + if (cpus_intersects(desc->affinity, cpu_online_map)) + mask = desc->affinity; + else + desc->status &= ~IRQ_AFFINITY_SET; + } + desc->affinity = mask; desc->chip->set_affinity(irq, mask); return 0; } +#else +static inline int do_irq_select_affinity(unsigned int irq, struct irq_desc *d) +{ + return irq_select_affinity(irq); +} #endif +/* + * Called when affinity is set via /proc/irq + */ +int irq_select_affinity_usr(unsigned int irq) +{ + struct irq_desc *desc = irq_to_desc(irq); + unsigned long flags; + int ret; + + spin_lock_irqsave(&desc->lock, flags); + ret = do_irq_select_affinity(irq, desc); + spin_unlock_irqrestore(&desc->lock, flags); + + return ret; +} + +#else +static inline int do_select_irq_affinity(int irq, struct irq_desc *desc) +{ + return 0; +} #endif /** @@ -446,7 +484,7 @@ __setup_irq(unsigned int irq, struct irq_desc * desc, struct irqaction *new) desc->depth = 1; /* Set default affinity mask once everything is setup */ - irq_select_affinity(irq); + do_irq_select_affinity(irq, desc); } else if ((new->flags & IRQF_TRIGGER_MASK) && (new->flags & IRQF_TRIGGER_MASK) diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c index 90b920d3f52b..9db681d95814 100644 --- a/kernel/irq/migration.c +++ b/kernel/irq/migration.c @@ -1,17 +1,6 @@ #include -void set_pending_irq(unsigned int irq, cpumask_t mask) -{ - struct irq_desc *desc = irq_to_desc(irq); - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); - desc->status |= IRQ_MOVE_PENDING; - desc->pending_mask = mask; - spin_unlock_irqrestore(&desc->lock, flags); -} - void move_masked_irq(int irq) { struct irq_desc *desc = irq_to_desc(irq); diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c index 4d161c70ba55..d257e7d6a8a4 100644 --- a/kernel/irq/proc.c +++ b/kernel/irq/proc.c @@ -62,7 +62,7 @@ static ssize_t irq_affinity_proc_write(struct file *file, if (!cpus_intersects(new_value, cpu_online_map)) /* Special case for empty set - allow the architecture code to set default SMP affinity. */ - return irq_select_affinity(irq) ? -EINVAL : count; + return irq_select_affinity_usr(irq) ? -EINVAL : count; irq_set_affinity(irq, new_value); -- cgit v1.2.3 From 612e3684c1b7752d2890510e4f90115fd1eb2afb Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 7 Nov 2008 13:58:46 +0100 Subject: genirq: fix the affinity setting in setup_irq The affinity setting in setup irq is called before the NO_BALANCING flag is checked and might therefore override affinity settings from the calling code with the default setting. Move the NO_BALANCING flag check before the call to the affinity setting. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/irq/manage.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 634a2a955104..948a22a2c013 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -123,7 +123,7 @@ int do_irq_select_affinity(unsigned int irq, struct irq_desc *desc) * Preserve an userspace affinity setup, but make sure that * one of the targets is online. */ - if (desc->status & IRQ_AFFINITY_SET) { + if (desc->status & (IRQ_AFFINITY_SET | IRQ_NO_BALANCING)) { if (cpus_intersects(desc->affinity, cpu_online_map)) mask = desc->affinity; else @@ -483,6 +483,10 @@ __setup_irq(unsigned int irq, struct irq_desc * desc, struct irqaction *new) /* Undo nested disables: */ desc->depth = 1; + /* Exclude IRQ from balancing if requested */ + if (new->flags & IRQF_NOBALANCING) + desc->status |= IRQ_NO_BALANCING; + /* Set default affinity mask once everything is setup */ do_irq_select_affinity(irq, desc); @@ -497,10 +501,6 @@ __setup_irq(unsigned int irq, struct irq_desc * desc, struct irqaction *new) *p = new; - /* Exclude IRQ from balancing */ - if (new->flags & IRQF_NOBALANCING) - desc->status |= IRQ_NO_BALANCING; - /* Reset broken irq detection when installing new handler */ desc->irq_count = 0; desc->irqs_unhandled = 0; -- cgit v1.2.3 From 6c2e94033df5ca11149e52dd179b8dde3172e9bf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 7 Nov 2008 12:33:49 +0100 Subject: x86: apic honour irq affinity which was set in early boot setup_ioapic_dest() is called after the non boot cpus have been brought up. It sets the irq affinity of all already configured interrupts to all cpus and ignores affinity settings which were done by the early bootup code. If the IRQ_NO_BALANCING or IRQ_AFFINITY_SET flags are set then use the affinity mask from the irq descriptor and not TARGET_CPUS. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c index 7a3f2028e2eb..988ee89467d3 100644 --- a/arch/x86/kernel/io_apic.c +++ b/arch/x86/kernel/io_apic.c @@ -3761,7 +3761,9 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) void __init setup_ioapic_dest(void) { int pin, ioapic, irq, irq_entry; + struct irq_desc *desc; struct irq_cfg *cfg; + cpumask_t mask; if (skip_ioapic_setup == 1) return; @@ -3778,16 +3780,30 @@ void __init setup_ioapic_dest(void) * cpu is online. */ cfg = irq_cfg(irq); - if (!cfg->vector) + if (!cfg->vector) { setup_IO_APIC_irq(ioapic, pin, irq, irq_trigger(irq_entry), irq_polarity(irq_entry)); + continue; + + } + + /* + * Honour affinities which have been set in early boot + */ + desc = irq_to_desc(irq); + if (desc->status & + (IRQ_NO_BALANCING | IRQ_AFFINITY_SET)) + mask = desc->affinity; + else + mask = TARGET_CPUS; + #ifdef CONFIG_INTR_REMAP - else if (intr_remapping_enabled) - set_ir_ioapic_affinity_irq(irq, TARGET_CPUS); -#endif + if (intr_remapping_enabled) + set_ir_ioapic_affinity_irq(irq, mask); else - set_ioapic_affinity_irq(irq, TARGET_CPUS); +#endif + set_ioapic_affinity_irq(irq, mask); } } -- cgit v1.2.3 From f131e2436ddbac2527bb2d6297a823aae4b024f8 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 8 Nov 2008 09:57:40 +0100 Subject: irq: fix typo Impact: build fix fix build failure on UP. Signed-off-by: Ingo Molnar --- kernel/irq/manage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 948a22a2c013..435861284e4c 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -159,7 +159,7 @@ int irq_select_affinity_usr(unsigned int irq) } #else -static inline int do_select_irq_affinity(int irq, struct irq_desc *desc) +static inline int do_irq_select_affinity(int irq, struct irq_desc *desc) { return 0; } -- cgit v1.2.3 From bf1b36445dc868cbbde194aa1dd87e38fe24cf16 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Sat, 13 Sep 2008 17:08:31 +0100 Subject: kbuild: Fixup deb-pkg target to generate separate firmware deb The below is a simplistic fix for "make deb-pkg"; it splits the firmware out to a linux-firmware-image package and adds an (unversioned) Suggests to the linux package for this firmware. Signed-Off-By: Jonathan McDowell Acked-by: Frans Pop Signed-off-by: Sam Ravnborg --- scripts/package/builddeb | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/scripts/package/builddeb b/scripts/package/builddeb index ba6bf5d5abf9..1264b8e2829d 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -15,15 +15,18 @@ set -e version=$KERNELRELEASE revision=`cat .version` tmpdir="$objtree/debian/tmp" +fwdir="$objtree/debian/fwtmp" packagename=linux-$version +fwpackagename=linux-firmware-image if [ "$ARCH" == "um" ] ; then packagename=user-mode-linux-$version fi # Setup the directory structure -rm -rf "$tmpdir" +rm -rf "$tmpdir" "$fwdir" mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot" +mkdir -p "$fwdir/DEBIAN" "$fwdir/lib" if [ "$ARCH" == "um" ] ; then mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin" fi @@ -107,6 +110,7 @@ Standards-Version: 3.6.1 Package: $packagename Provides: kernel-image-$version, linux-image-$version +Suggests: $fwpackagename Architecture: any Description: Linux kernel, version $version This package contains the Linux kernel, modules and corresponding other @@ -118,8 +122,24 @@ fi chown -R root:root "$tmpdir" chmod -R go-w "$tmpdir" +# Do we have firmware? Move it out of the way and build it into a package. +if [ -e "$tmpdir/lib/firmware" ]; then + mv "$tmpdir/lib/firmware" "$fwdir/lib/" + + cat <> debian/control + +Package: $fwpackagename +Architecture: all +Description: Linux kernel firmware, version $version + This package contains firmware from the Linux kernel, version $version +EOF + + dpkg-gencontrol -isp -p$fwpackagename -P"$fwdir" + dpkg --build "$fwdir" .. +fi + # Perform the final magic -dpkg-gencontrol -isp +dpkg-gencontrol -isp -p$packagename dpkg --build "$tmpdir" .. exit 0 -- cgit v1.2.3 From 9a6558371bcd01c2973b7638181db4ccc34eab4f Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 9 Nov 2008 12:45:10 -0800 Subject: regression: disable timer peek-ahead for 2.6.28 It's showing up as regressions; disabling it very likely just papers over an underlying issue, but time is running out for 2.6.28, lets get back to this for 2.6.29 Fixes: #11826 and #11893 Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- drivers/cpuidle/cpuidle.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 5bed73329ef8..8504a2108557 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -65,12 +65,14 @@ static void cpuidle_idle_call(void) return; } +#if 0 + /* shows regressions, re-enable for 2.6.29 */ /* * run any timers that can be run now, at this point * before calculating the idle duration etc. */ hrtimer_peek_ahead_timers(); - +#endif /* ask the governor for the next state */ next_state = cpuidle_curr_governor->select(dev); if (need_resched()) -- cgit v1.2.3 From f7160c7573615ec82c691e294cf80d920b5d588d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 9 Nov 2008 16:36:15 -0800 Subject: Linux 2.6.28-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 29abe62ccbad..7f9ff9bf1544 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Killer Bat of Doom # *DOCUMENTATION* -- cgit v1.2.3 From 9ccbece546cf836f67f6d9bb4bf2f70f7476cb2c Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Thu, 30 Oct 2008 16:53:25 +1100 Subject: [XFS] Fix use-after-free with log and quotas Destroying the quota stuff on unmount can access the log - ie XFS_QM_DONE() ends up in xfs_dqunlock() which calls xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the log has already been destroyed. Just move the cleanup of the quota code earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot. SGI-PV: 987086 SGI-Modid: xfs-linux-melb:xfs-kern:32148a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig Signed-off-by: Peter Leckie --- fs/xfs/xfs_mount.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index a4503f5e9497..15f5dd22fbb2 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -1245,6 +1245,9 @@ xfs_unmountfs( XFS_QM_DQPURGEALL(mp, XFS_QMOPT_QUOTALL | XFS_QMOPT_UMOUNTING); + if (mp->m_quotainfo) + XFS_QM_DONE(mp); + /* * Flush out the log synchronously so that we know for sure * that nothing is pinned. This is important because bflush() @@ -1297,8 +1300,6 @@ xfs_unmountfs( xfs_errortag_clearall(mp, 0); #endif xfs_free_perag(mp); - if (mp->m_quotainfo) - XFS_QM_DONE(mp); } STATIC void -- cgit v1.2.3 From 2cf7f0da3ae225848a2ee10d4e216448a770fd00 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Thu, 30 Oct 2008 16:59:06 +1100 Subject: [XFS] Wait for all I/O on truncate to zero file size It's possible to have outstanding xfs_ioend_t's queued when the file size is zero. This can happen in the direct I/O path when a direct I/O write fails due to ENOSPC. In this case the xfs_ioend_t will still be queued (ie xfs_end_io_direct() does not know that the I/O failed so can't force the xfs_ioend_t to be flushed synchronously). When we truncate a file on unlink we don't know to wait for these xfs_ioend_ts and we can have a use-after-free situation if the inode is reclaimed before the xfs_ioend_t is finally processed. As was suggested by Dave Chinner lets wait for all I/Os to complete when truncating the file size to zero. SGI-PV: 981668 SGI-Modid: xfs-linux-melb:xfs-kern:32216a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index dbd9cef852ec..a391b955df01 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1414,7 +1414,7 @@ xfs_itruncate_start( mp = ip->i_mount; /* wait for the completion of any pending DIOs */ - if (new_size < ip->i_size) + if (new_size == 0 || new_size < ip->i_size) vn_iowait(ip); /* -- cgit v1.2.3 From 6f9f51adb6ac0a49fce49e01c47dcfc2810c6e9d Mon Sep 17 00:00:00 2001 From: David Chinner Date: Thu, 30 Oct 2008 17:38:12 +1100 Subject: [XFS] Account for allocated blocks when expanding directories When we create a directory, we reserve a number of blocks for the maximum possible expansion of of the directory due to various btree splits, freespace allocation, etc. Unfortunately, each allocation is not reflected in the total number of blocks still available to the transaction, so the maximal reservation is used over and over again. This leads to problems where an allocation group has only enough blocks for *some* of the allocations required for the directory modification. After the first N allocations, the remaining blocks in the allocation group drops below the total reservation, and subsequent allocations fail because the allocator will not allow the allocation to proceed if the AG does not have the enough blocks available for the entire allocation total. This results in an ENOSPC occurring after an allocation has already occurred. This results in aborting the directory operation (leaving the directory in an inconsistent state) and cancelling a dirty transaction, which results in a filesystem shutdown. Avoid the problem by reflecting the number of blocks allocated in any directory expansion in the total number of blocks available to the modification in progress. This prevents a directory modification from being aborted part way through with an ENOSPC. SGI-PV: 988144 SGI-Modid: xfs-linux-melb:xfs-kern:32340a Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_da_btree.c | 5 +++++ fs/xfs/xfs_dir2.c | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 9e561a9cefca..a11a8390bf6c 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1566,11 +1566,14 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) int nmap, error, w, count, c, got, i, mapi; xfs_trans_t *tp; xfs_mount_t *mp; + xfs_drfsbno_t nblks; dp = args->dp; mp = dp->i_mount; w = args->whichfork; tp = args->trans; + nblks = dp->i_d.di_nblocks; + /* * For new directories adjust the file offset and block count. */ @@ -1647,6 +1650,8 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) } if (mapp != &map) kmem_free(mapp); + /* account for newly allocated blocks in reserved blocks total */ + args->total -= dp->i_d.di_nblocks - nblks; *new_blkno = (xfs_dablk_t)bno; return 0; } diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 80e0dc51361c..1afb12278b8d 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -525,11 +525,13 @@ xfs_dir2_grow_inode( xfs_mount_t *mp; int nmap; /* number of bmap entries */ xfs_trans_t *tp; + xfs_drfsbno_t nblks; xfs_dir2_trace_args_s("grow_inode", args, space); dp = args->dp; tp = args->trans; mp = dp->i_mount; + nblks = dp->i_d.di_nblocks; /* * Set lowest possible block in the space requested. */ @@ -622,7 +624,11 @@ xfs_dir2_grow_inode( */ if (mapp != &map) kmem_free(mapp); + + /* account for newly allocated blocks in reserved blocks total */ + args->total -= dp->i_d.di_nblocks - nblks; *dbp = xfs_dir2_da_to_db(mp, (xfs_dablk_t)bno); + /* * Update file's size if this is the data space and it grew. */ -- cgit v1.2.3 From 0f101fa6bccdc797ddcee40fd4c55e879155a40f Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Sun, 9 Nov 2008 20:32:40 +0200 Subject: ALSA: gusextreme: Fix build errors gusextreme depends on opl3 support. Add the approriate select to Kconfig. Also remove the unnecessary hwdep select. Relevant build errors: ERROR: "snd_opl3_hwdep_new" [sound/isa/gus/snd-gusextreme.ko] undefined! ERROR: "snd_opl3_create" [sound/isa/gus/snd-gusextreme.ko] undefined! Signed-off-by: Ville Syrjala Signed-off-by: Takashi Iwai --- sound/isa/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 660beb41f767..ce0aa044e274 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -211,7 +211,7 @@ config SND_GUSCLASSIC config SND_GUSEXTREME tristate "Gravis UltraSound Extreme" - select SND_HWDEP + select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM help -- cgit v1.2.3 From 8f330f5149ef41ff943b04d914406cc417f62784 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 10 Nov 2008 16:50:24 +1100 Subject: [XFS] handle memory allocation failures during log initialisation When there is no memory left in the system, xfs_buf_get_noaddr() can fail. If this happens at mount time during xlog_alloc_log() we fail to catch the error and oops. Catch the error from xfs_buf_get_noaddr(), and allow other memory allocations to fail and catch those errors too. Report the error to the console and fail the mount with ENOMEM. Tested by manually injecting errors into xfs_buf_get_noaddr() and xlog_alloc_log(). Version 2: o remove unnecessary casts of the returned pointer from kmem_zalloc() SGI-PV: 987246 Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_log.c | 39 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 36 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 0b02c6443551..3608a0f0a5f6 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -563,6 +563,11 @@ xfs_log_mount( } mp->m_log = xlog_alloc_log(mp, log_target, blk_offset, num_bblks); + if (!mp->m_log) { + cmn_err(CE_WARN, "XFS: Log allocation failed: No memory!"); + error = ENOMEM; + goto out; + } /* * Initialize the AIL now we have a log. @@ -601,6 +606,7 @@ xfs_log_mount( return 0; error: xfs_log_unmount_dealloc(mp); +out: return error; } /* xfs_log_mount */ @@ -1217,7 +1223,9 @@ xlog_alloc_log(xfs_mount_t *mp, int i; int iclogsize; - log = (xlog_t *)kmem_zalloc(sizeof(xlog_t), KM_SLEEP); + log = kmem_zalloc(sizeof(xlog_t), KM_MAYFAIL); + if (!log) + return NULL; log->l_mp = mp; log->l_targ = log_target; @@ -1249,6 +1257,8 @@ xlog_alloc_log(xfs_mount_t *mp, xlog_get_iclog_buffer_size(mp, log); bp = xfs_buf_get_empty(log->l_iclog_size, mp->m_logdev_targp); + if (!bp) + goto out_free_log; XFS_BUF_SET_IODONE_FUNC(bp, xlog_iodone); XFS_BUF_SET_BDSTRAT_FUNC(bp, xlog_bdstrat_cb); XFS_BUF_SET_FSPRIVATE2(bp, (unsigned long)1); @@ -1275,13 +1285,17 @@ xlog_alloc_log(xfs_mount_t *mp, iclogsize = log->l_iclog_size; ASSERT(log->l_iclog_size >= 4096); for (i=0; i < log->l_iclog_bufs; i++) { - *iclogp = (xlog_in_core_t *) - kmem_zalloc(sizeof(xlog_in_core_t), KM_SLEEP); + *iclogp = kmem_zalloc(sizeof(xlog_in_core_t), KM_MAYFAIL); + if (!*iclogp) + goto out_free_iclog; + iclog = *iclogp; iclog->ic_prev = prev_iclog; prev_iclog = iclog; bp = xfs_buf_get_noaddr(log->l_iclog_size, mp->m_logdev_targp); + if (!bp) + goto out_free_iclog; if (!XFS_BUF_CPSEMA(bp)) ASSERT(0); XFS_BUF_SET_IODONE_FUNC(bp, xlog_iodone); @@ -1323,6 +1337,25 @@ xlog_alloc_log(xfs_mount_t *mp, log->l_iclog->ic_prev = prev_iclog; /* re-write 1st prev ptr */ return log; + +out_free_iclog: + for (iclog = log->l_iclog; iclog; iclog = prev_iclog) { + prev_iclog = iclog->ic_next; + if (iclog->ic_bp) { + sv_destroy(&iclog->ic_force_wait); + sv_destroy(&iclog->ic_write_wait); + xfs_buf_free(iclog->ic_bp); + xlog_trace_iclog_dealloc(iclog); + } + kmem_free(iclog); + } + spinlock_destroy(&log->l_icloglock); + spinlock_destroy(&log->l_grant_lock); + xlog_trace_loggrant_dealloc(log); + xfs_buf_free(log->l_xbuf); +out_free_log: + kmem_free(log); + return NULL; } /* xlog_alloc_log */ -- cgit v1.2.3 From 220ca310a53200b4bfbc7c4c6e365eea284ec44f Mon Sep 17 00:00:00 2001 From: David Chinner Date: Thu, 30 Oct 2008 17:40:09 +1100 Subject: [XFS] XFS: Check for valid transaction headers in recovery When we are about to add a new item to a transaction in recovery, we need to check that it is valid first. Currently we just assert that header magic number matches, but in production systems that is not present and we add a corrupted transaction to the list to be processed. This results in a kernel oops later when processing the corrupted transaction. Instead, if we detect a corrupted transaction, abort recovery and leave the user to clean up the mess that has occurred. SGI-PV: 988145 SGI-Modid: xfs-linux-melb:xfs-kern:32356a Signed-off-by: David Chinner Signed-off-by: Tim Shimmin Signed-off-by: Eric Sandeen Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_log_recover.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 82d46ce69d5f..70e3ba32e6be 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1419,7 +1419,13 @@ xlog_recover_add_to_trans( return 0; item = trans->r_itemq; if (item == NULL) { - ASSERT(*(uint *)dp == XFS_TRANS_HEADER_MAGIC); + /* we need to catch log corruptions here */ + if (*(uint *)dp != XFS_TRANS_HEADER_MAGIC) { + xlog_warn("XFS: xlog_recover_add_to_trans: " + "bad header magic number"); + ASSERT(0); + return XFS_ERROR(EIO); + } if (len == sizeof(xfs_trans_header_t)) xlog_recover_add_item(&trans->r_itemq); memcpy(&trans->r_theader, dp, len); /* d, s, l */ -- cgit v1.2.3 From 5ac5c4d604bf894ef672a7971d03fefdc7ea7e49 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 10 Nov 2008 10:46:32 +0100 Subject: sched: clean up debug info Impact: clean up and fix debug info printout While looking over the sched_debug code I noticed that we printed the rq schedstats for every cfs_rq, ammend this. Also change nr_spead_over into an int, and fix a little buglet in min_vruntime printing. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- kernel/sched_debug.c | 41 +++++++++++++++++++++-------------------- 2 files changed, 22 insertions(+), 21 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 57c933ffbee1..f3149244e324 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -399,7 +399,7 @@ struct cfs_rq { */ struct sched_entity *curr, *next, *last; - unsigned long nr_spread_over; + unsigned int nr_spread_over; #ifdef CONFIG_FAIR_GROUP_SCHED struct rq *rq; /* cpu runqueue to which this cfs_rq is attached */ diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 5ae17762ec32..48ecc51e7701 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -144,7 +144,7 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) last = __pick_last_entity(cfs_rq); if (last) max_vruntime = last->vruntime; - min_vruntime = rq->cfs.min_vruntime; + min_vruntime = cfs_rq->min_vruntime; rq0_min_vruntime = per_cpu(runqueues, 0).cfs.min_vruntime; spin_unlock_irqrestore(&rq->lock, flags); SEQ_printf(m, " .%-30s: %Ld.%06ld\n", "MIN_vruntime", @@ -161,26 +161,8 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) SPLIT_NS(spread0)); SEQ_printf(m, " .%-30s: %ld\n", "nr_running", cfs_rq->nr_running); SEQ_printf(m, " .%-30s: %ld\n", "load", cfs_rq->load.weight); -#ifdef CONFIG_SCHEDSTATS -#define P(n) SEQ_printf(m, " .%-30s: %d\n", #n, rq->n); - - P(yld_exp_empty); - P(yld_act_empty); - P(yld_both_empty); - P(yld_count); - P(sched_switch); - P(sched_count); - P(sched_goidle); - - P(ttwu_count); - P(ttwu_local); - - P(bkl_count); - -#undef P -#endif - SEQ_printf(m, " .%-30s: %ld\n", "nr_spread_over", + SEQ_printf(m, " .%-30s: %d\n", "nr_spread_over", cfs_rq->nr_spread_over); #ifdef CONFIG_FAIR_GROUP_SCHED #ifdef CONFIG_SMP @@ -260,6 +242,25 @@ static void print_cpu(struct seq_file *m, int cpu) #undef P #undef PN +#ifdef CONFIG_SCHEDSTATS +#define P(n) SEQ_printf(m, " .%-30s: %d\n", #n, rq->n); + + P(yld_exp_empty); + P(yld_act_empty); + P(yld_both_empty); + P(yld_count); + + P(sched_switch); + P(sched_count); + P(sched_goidle); + + P(ttwu_count); + P(ttwu_local); + + P(bkl_count); + +#undef P +#endif print_cfs_stats(m, cpu); print_rt_stats(m, cpu); -- cgit v1.2.3 From acca4f4d9bd657e8bc7e1665ba5077465138f133 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 10 Nov 2008 20:00:45 +0900 Subject: sh: Handle fixmap TLB eviction more coherently. There was a race in the kmap_coherent() implementation. While we guarded against preemption, there was nothing preventing eviction of the pre-faulted fixmap entry from the UTLB. Under certain workloads this would result in the fixmap entries used for cache colouring being evicted from the UTLB in the midst of a copy_page(). In addition to pre-faulting, we also make sure to preserve the PTEs in the kernel page table and introduce a cached PTE for kmap_coherent() usage. This follows a similar change on MIPS ("[MIPS] Fix aliasing bug in copy_to_user_page / copy_from_user_page"). Reported-by: Hideo Saito Reported-by: CHIKAMA Masaki Tested-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/include/asm/pgtable.h | 6 ++++++ arch/sh/mm/init.c | 12 +++++++++--- arch/sh/mm/pg-sh4.c | 17 +++++++++++++++++ 3 files changed, 32 insertions(+), 3 deletions(-) diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index 52220d70a096..b517ae08b9c0 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -148,6 +148,12 @@ extern void paging_init(void); extern void page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd); +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_CPU_SH4) && defined(CONFIG_MMU) +extern void kmap_coherent_init(void); +#else +#define kmap_coherent_init() do { } while (0) +#endif + #include #endif /* __ASM_SH_PGTABLE_H */ diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 4abf00031dae..6cbef8caeb56 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -137,6 +137,7 @@ void __init page_table_range_init(unsigned long start, unsigned long end, void __init paging_init(void) { unsigned long max_zone_pfns[MAX_NR_ZONES]; + unsigned long vaddr; int nid; /* We don't need to map the kernel through the TLB, as @@ -148,10 +149,15 @@ void __init paging_init(void) * check for a null value. */ set_TTB(swapper_pg_dir); - /* Populate the relevant portions of swapper_pg_dir so that + /* + * Populate the relevant portions of swapper_pg_dir so that * we can use the fixmap entries without calling kmalloc. - * pte's will be filled in by __set_fixmap(). */ - page_table_range_init(FIXADDR_START, FIXADDR_TOP, swapper_pg_dir); + * pte's will be filled in by __set_fixmap(). + */ + vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; + page_table_range_init(vaddr, 0, swapper_pg_dir); + + kmap_coherent_init(); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 38870e0fc182..2fe14da1f839 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -7,6 +7,7 @@ * Released under the terms of the GNU GPL v2.0. */ #include +#include #include #include #include @@ -16,6 +17,20 @@ #define CACHE_ALIAS (current_cpu_data.dcache.alias_mask) +#define kmap_get_fixmap_pte(vaddr) \ + pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) + +static pte_t *kmap_coherent_pte; + +void __init kmap_coherent_init(void) +{ + unsigned long vaddr; + + /* cache the first coherent kmap pte */ + vaddr = __fix_to_virt(FIX_CMAP_BEGIN); + kmap_coherent_pte = kmap_get_fixmap_pte(vaddr); +} + static inline void *kmap_coherent(struct page *page, unsigned long addr) { enum fixed_addresses idx; @@ -34,6 +49,8 @@ static inline void *kmap_coherent(struct page *page, unsigned long addr) update_mmu_cache(NULL, vaddr, pte); + set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte); + return (void *)vaddr; } -- cgit v1.2.3 From 8a8bc22332ee6ea49137508467a76aa7f4367719 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 14:48:21 +0900 Subject: libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo Cc: Jens Axobe Cc: Jeff Garzik Signed-off-by: Linus Torvalds --- drivers/ata/libata-core.c | 66 ++++++++++++++++++++++++++++++++++++++++++----- drivers/ata/libata-scsi.c | 23 ++--------------- drivers/ata/libata.h | 19 ++------------ include/linux/libata.h | 1 + 4 files changed, 65 insertions(+), 44 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 622350d9b2e3..0cd3ad497136 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1712,6 +1712,8 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, else tag = 0; + if (test_and_set_bit(tag, &ap->qc_allocated)) + BUG(); qc = __ata_qc_from_tag(ap, tag); qc->tag = tag; @@ -4562,6 +4564,37 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) #endif /* __BIG_ENDIAN */ } +/** + * ata_qc_new - Request an available ATA command, for queueing + * @ap: Port associated with device @dev + * @dev: Device from whom we request an available command structure + * + * LOCKING: + * None. + */ + +static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) +{ + struct ata_queued_cmd *qc = NULL; + unsigned int i; + + /* no command while frozen */ + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) + return NULL; + + /* the last tag is reserved for internal command. */ + for (i = 0; i < ATA_MAX_QUEUE - 1; i++) + if (!test_and_set_bit(i, &ap->qc_allocated)) { + qc = __ata_qc_from_tag(ap, i); + break; + } + + if (qc) + qc->tag = i; + + return qc; +} + /** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure @@ -4571,20 +4604,16 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * None. */ -struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag) +struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; struct ata_queued_cmd *qc; - if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) - return NULL; - - qc = __ata_qc_from_tag(ap, tag); + qc = ata_qc_new(ap); if (qc) { qc->scsicmd = NULL; qc->ap = ap; qc->dev = dev; - qc->tag = tag; ata_qc_reinit(qc); } @@ -4592,6 +4621,31 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag) return qc; } +/** + * ata_qc_free - free unused ata_queued_cmd + * @qc: Command to complete + * + * Designed to free unused ata_queued_cmd object + * in case something prevents using it. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_free(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int tag; + + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + + qc->flags = 0; + tag = qc->tag; + if (likely(ata_tag_valid(tag))) { + qc->tag = ATA_TAG_POISON; + clear_bit(tag, &ap->qc_allocated); + } +} + void __ata_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 3fa75eac135d..47c7afcb36f2 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -709,11 +709,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, { struct ata_queued_cmd *qc; - if (cmd->request->tag != -1) - qc = ata_qc_new_init(dev, cmd->request->tag); - else - qc = ata_qc_new_init(dev, 0); - + qc = ata_qc_new_init(dev); if (qc) { qc->scsicmd = cmd; qc->scsidone = done; @@ -1108,17 +1104,7 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); depth = min(ATA_MAX_QUEUE - 1, depth); - - /* - * If this device is behind a port multiplier, we have - * to share the tag map between all devices on that PMP. - * Set up the shared tag map here and we get automatic. - */ - if (dev->link->ap->pmp_link) - scsi_init_shared_tag_map(sdev->host, ATA_MAX_QUEUE - 1); - - scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); - scsi_activate_tcq(sdev, depth); + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); } return 0; @@ -1958,11 +1944,6 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) hdr[1] |= (1 << 7); memcpy(rbuf, hdr, sizeof(hdr)); - - /* if ncq, set tags supported */ - if (ata_id_has_ncq(args->id)) - rbuf[7] |= (1 << 1); - memcpy(&rbuf[8], "ATA ", 8); ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16); ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index d3831d39bdaa..fe2839e58774 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -74,7 +74,7 @@ extern struct ata_link *ata_dev_phys_link(struct ata_device *dev); extern void ata_force_cbl(struct ata_port *ap); extern u64 ata_tf_to_lba(const struct ata_taskfile *tf); extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf); -extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag); +extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); @@ -103,6 +103,7 @@ extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_link *link); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern void ata_sg_clean(struct ata_queued_cmd *qc); +extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); extern int atapi_check_dma(struct ata_queued_cmd *qc); @@ -118,22 +119,6 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host); extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy); extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm); -/** - * ata_qc_free - free unused ata_queued_cmd - * @qc: Command to complete - * - * Designed to free unused ata_queued_cmd object - * in case something prevents using it. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -static inline void ata_qc_free(struct ata_queued_cmd *qc) -{ - qc->flags = 0; - qc->tag = ATA_TAG_POISON; -} - /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI extern void ata_acpi_associate_sata_port(struct ata_port *ap); diff --git a/include/linux/libata.h b/include/linux/libata.h index c7665a4134c5..59b0f1c807b5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -698,6 +698,7 @@ struct ata_port { unsigned int cbl; /* cable type; ATA_CBL_xxx */ struct ata_queued_cmd qcmd[ATA_MAX_QUEUE]; + unsigned long qc_allocated; unsigned int qc_active; int nr_active_links; /* #links with active qcs */ -- cgit v1.2.3 From 1de5b0854623d30d01d72cd4ea323eb5f39d1f16 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 2 Nov 2008 16:04:18 +0000 Subject: x86: HPET: convert WARN_ON to WARN_ON_ONCE It is possible to flood the console with call traces if the WARN_ON condition is true because of the frequency with which this function is called. Signed-off-by: Matt Fleming Cc: mingo@elte.hu Cc: venkatesh.pallipadi@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 77017e834cf7..f10f9461a43d 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -322,7 +322,7 @@ static int hpet_next_event(unsigned long delta, * what we wrote hit the chip before we compare it to the * counter. */ - WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt); + WARN_ON_ONCE((u32)hpet_readl(HPET_T0_CMP) != cnt); return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } -- cgit v1.2.3 From 89d77a1eb60be916d85d9394bedbfa2037af89c5 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 2 Nov 2008 16:04:20 +0000 Subject: x86: HPET: read from HPET_Tn_CMP() not HPET_T0_CMP In hpet_next_event() we check that the value we just wrote to HPET_Tn_CMP(timer) has reached the chip. Currently, we're checking that the value we wrote to HPET_Tn_CMP(timer) is in HPET_T0_CMP, which, if timer is anything other than timer 0, is likely to fail. Signed-off-by: Matt Fleming Cc: mingo@elte.hu Cc: venkatesh.pallipadi@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index f10f9461a43d..cfe6aa56f71b 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -322,7 +322,7 @@ static int hpet_next_event(unsigned long delta, * what we wrote hit the chip before we compare it to the * counter. */ - WARN_ON_ONCE((u32)hpet_readl(HPET_T0_CMP) != cnt); + WARN_ON_ONCE((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt); return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } -- cgit v1.2.3 From 5ceb1a04187553e08c6ab60d30cee7c454ee139a Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 2 Nov 2008 22:23:13 +0000 Subject: x86: HPET: enter hpet_interrupt_handler with interrupts disabled Some functions that may be called from this handler require that interrupts are disabled. Also, combining IRQF_DISABLED and IRQF_SHARED does not reliably disable interrupts in a handler, so remove IRQF_SHARED from the irq flags (this irq is not shared anyway). Signed-off-by: Matt Fleming Cc: mingo@elte.hu Cc: venkatesh.pallipadi@intel.com Cc: "Will Newton" Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index cfe6aa56f71b..067d8de913f6 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -445,7 +445,7 @@ static int hpet_setup_irq(struct hpet_dev *dev) { if (request_irq(dev->irq, hpet_interrupt_handler, - IRQF_SHARED|IRQF_NOBALANCING, dev->name, dev)) + IRQF_DISABLED|IRQF_NOBALANCING, dev->name, dev)) return -1; disable_irq(dev->irq); -- cgit v1.2.3 From 254248313aed7e6ff295ca21a82ca989b1f69c16 Mon Sep 17 00:00:00 2001 From: Travis Place Date: Mon, 10 Nov 2008 17:56:23 +0100 Subject: ALSA: hda - Make the HP EliteBook 8530p use AD1884A model laptop Added a QUIRK to patch_analog.c for the HP Elitebook 8530p (IDs 0x103c:0x30e7) to use AD1884A model 'laptop' by default. Playback and Capture confirmed working. Signed-off-by: Travis Place Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 400df85a4457..686c77491dea 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3861,6 +3861,7 @@ static const char *ad1884a_models[AD1884A_MODELS] = { static struct snd_pci_quirk ad1884a_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x3030, "HP", AD1884A_MOBILE), SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE), + SND_PCI_QUIRK(0x103c, 0x30e7, "HP EliteBook 8530p", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x3614, "HP 6730s", AD1884A_LAPTOP), SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD), {} -- cgit v1.2.3 From c3cb6827353102fee62f3b9401a03ee29b297e5b Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Thu, 23 Oct 2008 16:33:03 +0800 Subject: ocfs2: fix license in xattr This patch fixes the license in xattr.c and xattr.h. Signed-off-by: Tiger Yang Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 13 ++++--------- fs/ocfs2/xattr.h | 12 ++---------- 2 files changed, 6 insertions(+), 19 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 802c41492214..2f8952e4e4c1 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -3,25 +3,20 @@ * * xattr.c * - * Copyright (C) 2008 Oracle. All rights reserved. + * Copyright (C) 2004, 2008 Oracle. All rights reserved. * * CREDITS: - * Lots of code in this file is taken from ext3. + * Lots of code in this file is copy from linux/fs/ext3/xattr.c. + * Copyright (C) 2001-2003 Andreas Gruenbacher, * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public - * License as published by the Free Software Foundation; either - * version 2 of the License, or (at your option) any later version. + * License version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 021110-1307, USA. */ #include diff --git a/fs/ocfs2/xattr.h b/fs/ocfs2/xattr.h index c25c7c62a059..e4e45c81a261 100644 --- a/fs/ocfs2/xattr.h +++ b/fs/ocfs2/xattr.h @@ -3,24 +3,16 @@ * * xattr.h * - * Function prototypes - * - * Copyright (C) 2008 Oracle. All rights reserved. + * Copyright (C) 2004, 2008 Oracle. All rights reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public - * License as published by the Free Software Foundation; either - * version 2 of the License, or (at your option) any later version. + * License version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 021110-1307, USA. */ #ifndef OCFS2_XATTR_H -- cgit v1.2.3 From 0030e001505d2d1503c083c917a747c033eaf8cd Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Thu, 23 Oct 2008 16:33:33 +0800 Subject: ocfs2: fix function declaration and definition in xattr Because we merged the xattr sources into one file, some functions no longer belong in the header file. Signed-off-by: Tiger Yang Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 28 +++++++++++++++++++++++----- fs/ocfs2/xattr.h | 26 ++++---------------------- 2 files changed, 27 insertions(+), 27 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 2f8952e4e4c1..420d8e30b184 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -132,6 +132,24 @@ static int ocfs2_xattr_set_entry_index_block(struct inode *inode, static int ocfs2_delete_xattr_index_block(struct inode *inode, struct buffer_head *xb_bh); +static inline u16 ocfs2_xattr_buckets_per_cluster(struct ocfs2_super *osb) +{ + return (1 << osb->s_clustersize_bits) / OCFS2_XATTR_BUCKET_SIZE; +} + +static inline u16 ocfs2_blocks_per_xattr_bucket(struct super_block *sb) +{ + return OCFS2_XATTR_BUCKET_SIZE / (1 << sb->s_blocksize_bits); +} + +static inline u16 ocfs2_xattr_max_xe_in_bucket(struct super_block *sb) +{ + u16 len = sb->s_blocksize - + offsetof(struct ocfs2_xattr_header, xh_entries); + + return len / sizeof(struct ocfs2_xattr_entry); +} + static inline const char *ocfs2_xattr_prefix(int name_index) { struct xattr_handler *handler = NULL; @@ -832,11 +850,11 @@ cleanup: * Copy an extended attribute into the buffer provided. * Buffer is NULL to compute the size of buffer required. */ -int ocfs2_xattr_get(struct inode *inode, - int name_index, - const char *name, - void *buffer, - size_t buffer_size) +static int ocfs2_xattr_get(struct inode *inode, + int name_index, + const char *name, + void *buffer, + size_t buffer_size) { int ret; struct ocfs2_dinode *di = NULL; diff --git a/fs/ocfs2/xattr.h b/fs/ocfs2/xattr.h index e4e45c81a261..1d8314c7656d 100644 --- a/fs/ocfs2/xattr.h +++ b/fs/ocfs2/xattr.h @@ -32,29 +32,11 @@ enum ocfs2_xattr_type { extern struct xattr_handler ocfs2_xattr_user_handler; extern struct xattr_handler ocfs2_xattr_trusted_handler; - -extern ssize_t ocfs2_listxattr(struct dentry *, char *, size_t); -extern int ocfs2_xattr_get(struct inode *, int, const char *, void *, size_t); -extern int ocfs2_xattr_set(struct inode *, int, const char *, const void *, - size_t, int); -extern int ocfs2_xattr_remove(struct inode *inode, struct buffer_head *di_bh); extern struct xattr_handler *ocfs2_xattr_handlers[]; -static inline u16 ocfs2_xattr_buckets_per_cluster(struct ocfs2_super *osb) -{ - return (1 << osb->s_clustersize_bits) / OCFS2_XATTR_BUCKET_SIZE; -} - -static inline u16 ocfs2_blocks_per_xattr_bucket(struct super_block *sb) -{ - return OCFS2_XATTR_BUCKET_SIZE / (1 << sb->s_blocksize_bits); -} - -static inline u16 ocfs2_xattr_max_xe_in_bucket(struct super_block *sb) -{ - u16 len = sb->s_blocksize - - offsetof(struct ocfs2_xattr_header, xh_entries); +ssize_t ocfs2_listxattr(struct dentry *, char *, size_t); +int ocfs2_xattr_set(struct inode *, int, const char *, const void *, + size_t, int); +int ocfs2_xattr_remove(struct inode *, struct buffer_head *); - return len / sizeof(struct ocfs2_xattr_entry); -} #endif /* OCFS2_XATTR_H */ -- cgit v1.2.3 From ceb1eba3dc2ad94b25764785ff7d2082c6094115 Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Thu, 23 Oct 2008 16:34:13 +0800 Subject: ocfs2: remove duplicate definition in xattr Include/linux/xattr.h already has the definition about xattr prefix, so remove the duplicate definitions in xattr.c. Signed-off-by: Tiger Yang Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 420d8e30b184..a9da45bbb9ed 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -4740,14 +4740,11 @@ out: /* * 'trusted' attributes support */ - -#define XATTR_TRUSTED_PREFIX "trusted." - static size_t ocfs2_xattr_trusted_list(struct inode *inode, char *list, size_t list_size, const char *name, size_t name_len) { - const size_t prefix_len = sizeof(XATTR_TRUSTED_PREFIX) - 1; + const size_t prefix_len = XATTR_TRUSTED_PREFIX_LEN; const size_t total_len = prefix_len + name_len + 1; if (list && total_len <= list_size) { @@ -4784,18 +4781,14 @@ struct xattr_handler ocfs2_xattr_trusted_handler = { .set = ocfs2_xattr_trusted_set, }; - /* * 'user' attributes support */ - -#define XATTR_USER_PREFIX "user." - static size_t ocfs2_xattr_user_list(struct inode *inode, char *list, size_t list_size, const char *name, size_t name_len) { - const size_t prefix_len = sizeof(XATTR_USER_PREFIX) - 1; + const size_t prefix_len = XATTR_USER_PREFIX_LEN; const size_t total_len = prefix_len + name_len + 1; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); -- cgit v1.2.3 From c988fd045f1195e62c0970384903ab9da26a9359 Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Thu, 23 Oct 2008 16:34:44 +0800 Subject: ocfs2: add handler_map array bounds checking Make the handler_map array as large as the possible value range to avoid a fencepost error. [ Utilize alternate method -- Joel ] Signed-off-by: Tiger Yang Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index a9da45bbb9ed..e19980a71a3c 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -78,7 +78,7 @@ struct xattr_handler *ocfs2_xattr_handlers[] = { NULL }; -static struct xattr_handler *ocfs2_xattr_handler_map[] = { +static struct xattr_handler *ocfs2_xattr_handler_map[OCFS2_XATTR_MAX] = { [OCFS2_XATTR_INDEX_USER] = &ocfs2_xattr_user_handler, [OCFS2_XATTR_INDEX_TRUSTED] = &ocfs2_xattr_trusted_handler, }; -- cgit v1.2.3 From f6087fb799e097e7c9d912daa75701de9d62dc53 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 20 Oct 2008 18:20:43 -0700 Subject: ocfs2: Check xattr block signatures properly. The xattr.c code is currently memcmp()ing naking buffer pointers. Create the OCFS2_IS_VALID_XATTR_BLOCK() macro to match its peers and use that. In addition, failed signature checks were returning -EFAULT, which is completely wrong. Return -EIO. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/ocfs2.h | 3 +++ fs/ocfs2/xattr.c | 38 ++++++++++++++++---------------------- 2 files changed, 19 insertions(+), 22 deletions(-) diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index a21a465490c4..fef7ece32376 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -473,6 +473,9 @@ static inline int ocfs2_uses_extended_slot_map(struct ocfs2_super *osb) (____gd)->bg_signature); \ } while (0) +#define OCFS2_IS_VALID_XATTR_BLOCK(ptr) \ + (!strcmp((ptr)->xb_signature, OCFS2_XATTR_BLOCK_SIGNATURE)) + static inline unsigned long ino_from_blkno(struct super_block *sb, u64 blkno) { diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index e19980a71a3c..151ba6257fbb 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -555,14 +555,12 @@ static int ocfs2_xattr_block_list(struct inode *inode, mlog_errno(ret); return ret; } - /*Verify the signature of xattr block*/ - if (memcmp((void *)blk_bh->b_data, OCFS2_XATTR_BLOCK_SIGNATURE, - strlen(OCFS2_XATTR_BLOCK_SIGNATURE))) { - ret = -EFAULT; - goto cleanup; - } xb = (struct ocfs2_xattr_block *)blk_bh->b_data; + if (!OCFS2_IS_VALID_XATTR_BLOCK(xb)) { + ret = -EIO; + goto cleanup; + } if (!(le16_to_cpu(xb->xb_flags) & OCFS2_XATTR_INDEXED)) { struct ocfs2_xattr_header *header = &xb->xb_attrs.xb_header; @@ -779,15 +777,14 @@ static int ocfs2_xattr_block_get(struct inode *inode, mlog_errno(ret); return ret; } - /*Verify the signature of xattr block*/ - if (memcmp((void *)blk_bh->b_data, OCFS2_XATTR_BLOCK_SIGNATURE, - strlen(OCFS2_XATTR_BLOCK_SIGNATURE))) { - ret = -EFAULT; + + xb = (struct ocfs2_xattr_block *)blk_bh->b_data; + if (!OCFS2_IS_VALID_XATTR_BLOCK(xb)) { + ret = -EIO; goto cleanup; } xs->xattr_bh = blk_bh; - xb = (struct ocfs2_xattr_block *)blk_bh->b_data; if (!(le16_to_cpu(xb->xb_flags) & OCFS2_XATTR_INDEXED)) { xs->header = &xb->xb_attrs.xb_header; @@ -1527,10 +1524,9 @@ static int ocfs2_xattr_free_block(struct inode *inode, goto out; } - /*Verify the signature of xattr block*/ - if (memcmp((void *)blk_bh->b_data, OCFS2_XATTR_BLOCK_SIGNATURE, - strlen(OCFS2_XATTR_BLOCK_SIGNATURE))) { - ret = -EFAULT; + xb = (struct ocfs2_xattr_block *)blk_bh->b_data; + if (!OCFS2_IS_VALID_XATTR_BLOCK(xb)) { + ret = -EIO; goto out; } @@ -1540,7 +1536,6 @@ static int ocfs2_xattr_free_block(struct inode *inode, goto out; } - xb = (struct ocfs2_xattr_block *)blk_bh->b_data; blk = le64_to_cpu(xb->xb_blkno); bit = le16_to_cpu(xb->xb_suballoc_bit); bg_blkno = ocfs2_which_suballoc_group(blk, bit); @@ -1784,15 +1779,14 @@ static int ocfs2_xattr_block_find(struct inode *inode, mlog_errno(ret); return ret; } - /*Verify the signature of xattr block*/ - if (memcmp((void *)blk_bh->b_data, OCFS2_XATTR_BLOCK_SIGNATURE, - strlen(OCFS2_XATTR_BLOCK_SIGNATURE))) { - ret = -EFAULT; - goto cleanup; + + xb = (struct ocfs2_xattr_block *)blk_bh->b_data; + if (!OCFS2_IS_VALID_XATTR_BLOCK(xb)) { + ret = -EIO; + goto cleanup; } xs->xattr_bh = blk_bh; - xb = (struct ocfs2_xattr_block *)blk_bh->b_data; if (!(le16_to_cpu(xb->xb_flags) & OCFS2_XATTR_INDEXED)) { xs->header = &xb->xb_attrs.xb_header; -- cgit v1.2.3 From b37c4d84e9d16fd5b6f31197f02ea0a112fc9e99 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 20 Oct 2008 18:24:03 -0700 Subject: ocfs2: Don't return -EFAULT from a corrupt xattr entry. If the xattr disk structures are corrupt, return -EIO, not -EFAULT. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 151ba6257fbb..41a6ca004ae3 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -1239,7 +1239,7 @@ static int ocfs2_xattr_set_entry(struct inode *inode, free = min_offs - ((void *)last - xs->base) - sizeof(__u32); if (free < 0) - return -EFAULT; + return -EIO; if (!xs->not_found) { size_t size = 0; -- cgit v1.2.3 From bd60bd37ade4321ecce4ed4442f68c88febd76d5 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 20 Oct 2008 18:25:56 -0700 Subject: ocfs2: Check errors from ocfs2_xattr_update_xattr_search() The ocfs2_xattr_update_xattr_search() function can return an error when trying to read blocks off of disk. The caller needs to check this error before using those (possibly invalid) blocks. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 41a6ca004ae3..92df88a41e5d 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -2825,7 +2825,11 @@ static int ocfs2_xattr_create_index_block(struct inode *inode, if (data_bh) ocfs2_journal_dirty(handle, data_bh); - ocfs2_xattr_update_xattr_search(inode, xs, xb_bh, xh_bh); + ret = ocfs2_xattr_update_xattr_search(inode, xs, xb_bh, xh_bh); + if (ret) { + mlog_errno(ret); + goto out_commit; + } /* Change from ocfs2_xattr_header to ocfs2_xattr_tree_root */ memset(&xb->xb_attrs, 0, inode->i_sb->s_blocksize - -- cgit v1.2.3 From eb6ff2397d1fdfc6a7629c99896338e5b5c508e5 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 20 Oct 2008 18:32:48 -0700 Subject: ocfs2: Specify appropriate journal access for new xattr buckets. There are a couple places that get an xattr bucket that may be reading an existing one or may be allocating a new one. They should specify the correct journal access mode depending. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 92df88a41e5d..fb450200bc88 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -3231,7 +3231,9 @@ static int ocfs2_half_xattr_bucket(struct inode *inode, for (i = 0; i < blk_per_bucket; i++) { ret = ocfs2_journal_access(handle, inode, t_bhs[i], - OCFS2_JOURNAL_ACCESS_CREATE); + new_bucket_head ? + OCFS2_JOURNAL_ACCESS_CREATE : + OCFS2_JOURNAL_ACCESS_WRITE); if (ret) { mlog_errno(ret); goto out; @@ -3393,6 +3395,8 @@ static int ocfs2_cp_xattr_bucket(struct inode *inode, for (i = 0; i < blk_per_bucket; i++) { ret = ocfs2_journal_access(handle, inode, t_bhs[i], + t_is_new ? + OCFS2_JOURNAL_ACCESS_CREATE : OCFS2_JOURNAL_ACCESS_WRITE); if (ret) goto out; -- cgit v1.2.3 From 54f443f4e7265a1333886dbace31cb6eb1991c72 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 20 Oct 2008 18:43:07 -0700 Subject: ocfs2: Don't repeat ocfs2_xattr_block_find() ocfs2_xattr_block_get() looks up the xattr in a startlingly familiar way; it's identical to the function ocfs2_xattr_block_find(). Let's just use the later in the former. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 39 +++++++++------------------------------ 1 file changed, 9 insertions(+), 30 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index fb450200bc88..74d1faba23bb 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -111,6 +111,10 @@ static int ocfs2_xattr_bucket_get_name_value(struct inode *inode, int *block_off, int *new_offset); +static int ocfs2_xattr_block_find(struct inode *inode, + int name_index, + const char *name, + struct ocfs2_xattr_search *xs); static int ocfs2_xattr_index_block_find(struct inode *inode, struct buffer_head *root_bh, int name_index, @@ -760,46 +764,20 @@ static int ocfs2_xattr_block_get(struct inode *inode, size_t buffer_size, struct ocfs2_xattr_search *xs) { - struct ocfs2_dinode *di = (struct ocfs2_dinode *)xs->inode_bh->b_data; - struct buffer_head *blk_bh = NULL; struct ocfs2_xattr_block *xb; struct ocfs2_xattr_value_root *xv; size_t size; int ret = -ENODATA, name_offset, name_len, block_off, i; - if (!di->i_xattr_loc) - return ret; - memset(&xs->bucket, 0, sizeof(xs->bucket)); - ret = ocfs2_read_block(inode, le64_to_cpu(di->i_xattr_loc), &blk_bh); - if (ret < 0) { + ret = ocfs2_xattr_block_find(inode, name_index, name, xs); + if (ret) { mlog_errno(ret); - return ret; - } - - xb = (struct ocfs2_xattr_block *)blk_bh->b_data; - if (!OCFS2_IS_VALID_XATTR_BLOCK(xb)) { - ret = -EIO; goto cleanup; } - xs->xattr_bh = blk_bh; - - if (!(le16_to_cpu(xb->xb_flags) & OCFS2_XATTR_INDEXED)) { - xs->header = &xb->xb_attrs.xb_header; - xs->base = (void *)xs->header; - xs->end = (void *)(blk_bh->b_data) + blk_bh->b_size; - xs->here = xs->header->xh_entries; - - ret = ocfs2_xattr_find_entry(name_index, name, xs); - } else - ret = ocfs2_xattr_index_block_find(inode, blk_bh, - name_index, - name, xs); - - if (ret) - goto cleanup; + xb = (struct ocfs2_xattr_block *)xs->xattr_bh->b_data; size = le64_to_cpu(xs->here->xe_value_size); if (buffer) { ret = -ERANGE; @@ -838,7 +816,8 @@ cleanup: brelse(xs->bucket.bhs[i]); memset(&xs->bucket, 0, sizeof(xs->bucket)); - brelse(blk_bh); + brelse(xs->xattr_bh); + xs->xattr_bh = NULL; return ret; } -- cgit v1.2.3 From 63fd77573723841d5d44a79471258f1b261f4482 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 17 Oct 2008 12:44:36 +0800 Subject: ocfs2: Remove unused ocfs2_restore_xattr_block(). Since now ocfs2 supports empty xattr buckets, we will never remove the xattr index tree even if all the xattrs are removed, so this function will never be called. So remove it. Signed-off-by: Tao Ma Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 48 ------------------------------------------------ 1 file changed, 48 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 74d1faba23bb..789fb70462c9 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -1791,52 +1791,6 @@ cleanup: return ret; } -/* - * When all the xattrs are deleted from index btree, the ocfs2_xattr_tree - * will be erased and ocfs2_xattr_block will have its ocfs2_xattr_header - * re-initialized. - */ -static int ocfs2_restore_xattr_block(struct inode *inode, - struct ocfs2_xattr_search *xs) -{ - int ret; - handle_t *handle; - struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); - struct ocfs2_xattr_block *xb = - (struct ocfs2_xattr_block *)xs->xattr_bh->b_data; - struct ocfs2_extent_list *el = &xb->xb_attrs.xb_root.xt_list; - u16 xb_flags = le16_to_cpu(xb->xb_flags); - - BUG_ON(!(xb_flags & OCFS2_XATTR_INDEXED) || - le16_to_cpu(el->l_next_free_rec) != 0); - - handle = ocfs2_start_trans(osb, OCFS2_XATTR_BLOCK_UPDATE_CREDITS); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - handle = NULL; - goto out; - } - - ret = ocfs2_journal_access(handle, inode, xs->xattr_bh, - OCFS2_JOURNAL_ACCESS_WRITE); - if (ret < 0) { - mlog_errno(ret); - goto out_commit; - } - - memset(&xb->xb_attrs, 0, inode->i_sb->s_blocksize - - offsetof(struct ocfs2_xattr_block, xb_attrs)); - - xb->xb_flags = cpu_to_le16(xb_flags & ~OCFS2_XATTR_INDEXED); - - ocfs2_journal_dirty(handle, xs->xattr_bh); - -out_commit: - ocfs2_commit_trans(osb, handle); -out: - return ret; -} - /* * ocfs2_xattr_block_set() * @@ -1947,8 +1901,6 @@ out: } ret = ocfs2_xattr_set_entry_index_block(inode, xi, xs); - if (!ret && xblk->xb_attrs.xb_root.xt_list.l_next_free_rec == 0) - ret = ocfs2_restore_xattr_block(inode, xs); end: -- cgit v1.2.3 From 8573f79d30077875e2b6e83849b5245bfbb08685 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 24 Oct 2008 22:24:17 +0800 Subject: ocfs2: Fix some typos in xattr annotations. Fix some typos in the xattr annotations. Signed-off-by: Tao Ma Reported-by: Coly Li Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/ocfs2_fs.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index f24ce3d3f956..5f180cf7abbd 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -742,12 +742,12 @@ struct ocfs2_group_desc */ struct ocfs2_xattr_entry { __le32 xe_name_hash; /* hash value of xattr prefix+suffix. */ - __le16 xe_name_offset; /* byte offset from the 1st etnry in the local + __le16 xe_name_offset; /* byte offset from the 1st entry in the local xattr storage(inode, xattr block or xattr bucket). */ __u8 xe_name_len; /* xattr name len, does't include prefix. */ - __u8 xe_type; /* the low 7 bits indicates the name prefix's - * type and the highest 1 bits indicate whether + __u8 xe_type; /* the low 7 bits indicate the name prefix + * type and the highest bit indicates whether * the EA is stored in the local storage. */ __le64 xe_value_size; /* real xattr value length. */ }; @@ -766,9 +766,10 @@ struct ocfs2_xattr_header { xattr. */ __le16 xh_name_value_len; /* total length of name/value length in this bucket. */ - __le16 xh_num_buckets; /* bucket nums in one extent - record, only valid in the - first bucket. */ + __le16 xh_num_buckets; /* Number of xattr buckets + in this extent record, + only valid in the first + bucket. */ __le64 xh_csum; struct ocfs2_xattr_entry xh_entries[0]; /* xattr entry list. */ }; @@ -776,8 +777,8 @@ struct ocfs2_xattr_header { /* * On disk structure for xattr value root. * - * It is used when one extended attribute's size is larger, and we will save it - * in an outside cluster. It will stored in a b-tree like file content. + * When an xattr's value is large enough, it is stored in an external + * b-tree like file data. The xattr value root points to this structure. */ struct ocfs2_xattr_value_root { /*00*/ __le32 xr_clusters; /* clusters covered by xattr value. */ -- cgit v1.2.3 From fa38e92cb34e27e60d0faf1035934eb9b44aa1d4 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 20 Oct 2008 19:23:51 +0200 Subject: ocfs2: Fix check of return value of ocfs2_start_trans() On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM). Thus checks for !handle are wrong. Fix them to use IS_ERR(). Signed-off-by: Jan Kara Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/file.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 7efe937a415f..3138a385fdbb 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -247,8 +247,8 @@ int ocfs2_update_inode_atime(struct inode *inode, mlog_entry_void(); handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); - if (handle == NULL) { - ret = -ENOMEM; + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); mlog_errno(ret); goto out; } @@ -312,8 +312,8 @@ static int ocfs2_simple_size_update(struct inode *inode, handle_t *handle = NULL; handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); - if (handle == NULL) { - ret = -ENOMEM; + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); mlog_errno(ret); goto out; } @@ -1055,8 +1055,8 @@ static int __ocfs2_write_remove_suid(struct inode *inode, (unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_mode); handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); - if (handle == NULL) { - ret = -ENOMEM; + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); mlog_errno(ret); goto out; } @@ -1259,8 +1259,8 @@ static int __ocfs2_remove_inode_range(struct inode *inode, } handle = ocfs2_start_trans(osb, OCFS2_REMOVE_EXTENT_CREDITS); - if (handle == NULL) { - ret = -ENOMEM; + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); mlog_errno(ret); goto out; } @@ -1352,8 +1352,8 @@ static int ocfs2_zero_partial_clusters(struct inode *inode, goto out; handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); - if (handle == NULL) { - ret = -ENOMEM; + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); mlog_errno(ret); goto out; } -- cgit v1.2.3 From 87cfa004321c62aec681713ea48e0b846336d9f4 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 20 Oct 2008 19:23:53 +0200 Subject: ocfs2: Fix checking of return value of new_inode() new_inode() does not return ERR_PTR() but NULL in case of failure. Correct checking of the return value. Signed-off-by: Jan Kara Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/namei.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 485a6aa0ad39..f594f300d4cd 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -378,8 +378,8 @@ static int ocfs2_mknod_locked(struct ocfs2_super *osb, } inode = new_inode(dir->i_sb); - if (IS_ERR(inode)) { - status = PTR_ERR(inode); + if (!inode) { + status = -ENOMEM; mlog(ML_ERROR, "new_inode failed!\n"); goto leave; } -- cgit v1.2.3 From b99835c1684918b9975851d71455c5c007d1715b Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 20 Oct 2008 19:23:54 +0200 Subject: ocfs2: Let inode be really deleted when ocfs2_mknod_locked() fails We forgot to set i_nlink to 0 when returning due to error from ocfs2_mknod_locked() and thus inode was not properly released via ocfs2_delete_inode() (e.g. claimed space was not released). Fix it. Signed-off-by: Jan Kara Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/namei.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index f594f300d4cd..f4967e634ffd 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -491,8 +491,10 @@ leave: brelse(*new_fe_bh); *new_fe_bh = NULL; } - if (inode) + if (inode) { + clear_nlink(inode); iput(inode); + } } mlog_exit(status); -- cgit v1.2.3 From d32647993c211901fc4819ef3327f62d1859241b Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 24 Oct 2008 07:57:28 +0800 Subject: ocfs2: Fix check of return value of ocfs2_start_trans() in xattr.c. On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM), so we should check whether handle is NULL. Fix them to use IS_ERR(). Jan has made the patch for other part in ocfs2(thank Jan for it), so this is just the fix for fs/ocfs2/xattr.c. Signed-off-by: Tao Ma Cc: Jan Kara Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 789fb70462c9..a371c01942b1 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -4092,7 +4092,7 @@ static int ocfs2_xattr_value_update_size(struct inode *inode, handle_t *handle = NULL; handle = ocfs2_start_trans(osb, 1); - if (handle == NULL) { + if (IS_ERR(handle)) { ret = -ENOMEM; mlog_errno(ret); goto out; @@ -4259,7 +4259,7 @@ static int ocfs2_rm_xattr_cluster(struct inode *inode, } handle = ocfs2_start_trans(osb, OCFS2_REMOVE_EXTENT_CREDITS); - if (handle == NULL) { + if (IS_ERR(handle)) { ret = -ENOMEM; mlog_errno(ret); goto out; -- cgit v1.2.3 From ae0dff683076b2798763288c7ac2f09a18c4a998 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Wed, 22 Oct 2008 13:24:29 -0700 Subject: ocfs2: Set journal descriptor to NULL after journal shutdown Patch sets journal descriptor to NULL after the journal is shutdown. This ensures that jbd2_journal_release_jbd_inode(), which removes the jbd2 inode from txn lists, can be called safely from ocfs2_clear_inode() even after the journal has been shutdown. Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/inode.c | 6 ++++++ fs/ocfs2/journal.c | 1 + 2 files changed, 7 insertions(+) diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index 4903688f72a9..7aa00d511874 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -1106,6 +1106,12 @@ void ocfs2_clear_inode(struct inode *inode) oi->ip_last_trans = 0; oi->ip_dir_start_lookup = 0; oi->ip_blkno = 0ULL; + + /* + * ip_jinode is used to track txns against this inode. We ensure that + * the journal is flushed before journal shutdown. Thus it is safe to + * have inodes get cleaned up after journal shutdown. + */ jbd2_journal_release_jbd_inode(OCFS2_SB(inode->i_sb)->journal->j_journal, &oi->ip_jinode); diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 81e40677eecb..99fe9d584f3c 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -690,6 +690,7 @@ void ocfs2_journal_shutdown(struct ocfs2_super *osb) /* Shutdown the kernel journal system */ jbd2_journal_destroy(journal->j_journal); + journal->j_journal = NULL; OCFS2_I(inode)->ip_open_count--; -- cgit v1.2.3 From 4c1bbf1ba631d7db61ce3462349a3f5d14ae3009 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Mon, 6 Oct 2008 16:59:55 +0800 Subject: ocfs2: return 0 in page_mkwrite to let VFS retry. In ocfs2_page_mkwrite, we return -EINVAL when we found the page mapping isn't updated, and it will cause the user space program get SIGBUS and exit. The reason is that during race writeable mmap, we will do unmap_mapping_range in ocfs2_data_downconvert_worker. The good thing is that if we reuturn 0 in page_mkwrite, VFS will retry fault and then call page_mkwrite again, so it is safe to return 0 here. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh --- fs/ocfs2/mmap.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c index 3dc18d67557c..eea1d24713ea 100644 --- a/fs/ocfs2/mmap.c +++ b/fs/ocfs2/mmap.c @@ -113,7 +113,11 @@ static int __ocfs2_page_mkwrite(struct inode *inode, struct buffer_head *di_bh, * ocfs2_write_begin_nolock(). */ if (!PageUptodate(page) || page->mapping != inode->i_mapping) { - ret = -EINVAL; + /* + * the page has been umapped in ocfs2_data_downconvert_worker. + * So return 0 here and let VFS retry. + */ + ret = 0; goto out; } -- cgit v1.2.3 From 80bcaf3469b8aefd316d4ceb27d9af7cfbb0b913 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Mon, 27 Oct 2008 06:06:24 +0800 Subject: ocfs2/xattr: Proper hash collision handle in bucket division In ocfs2/xattr, we must make sure the xattrs which have the same hash value exist in the same bucket so that the search schema can work. But in the old implementation, when we want to extend a bucket, we just move half number of xattrs to the new bucket. This works in most cases, but if we are lucky enough we will move 2 xattrs into 2 different buckets. This means that an xattr from the previous bucket cannot be found anymore. This patch fix this problem by finding the right position during extending the bucket and extend an empty bucket if needed. Signed-off-by: Tao Ma Cc: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 144 ++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 115 insertions(+), 29 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index a371c01942b1..f3ea7efb48c6 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -3110,25 +3110,73 @@ static int ocfs2_read_xattr_bucket(struct inode *inode, } /* - * Move half num of the xattrs in old bucket(blk) to new bucket(new_blk). + * Find the suitable pos when we divide a bucket into 2. + * We have to make sure the xattrs with the same hash value exist + * in the same bucket. + * + * If this ocfs2_xattr_header covers more than one hash value, find a + * place where the hash value changes. Try to find the most even split. + * The most common case is that all entries have different hash values, + * and the first check we make will find a place to split. + */ +static int ocfs2_xattr_find_divide_pos(struct ocfs2_xattr_header *xh) +{ + struct ocfs2_xattr_entry *entries = xh->xh_entries; + int count = le16_to_cpu(xh->xh_count); + int delta, middle = count / 2; + + /* + * We start at the middle. Each step gets farther away in both + * directions. We therefore hit the change in hash value + * nearest to the middle. Note that this loop does not execute for + * count < 2. + */ + for (delta = 0; delta < middle; delta++) { + /* Let's check delta earlier than middle */ + if (cmp_xe(&entries[middle - delta - 1], + &entries[middle - delta])) + return middle - delta; + + /* For even counts, don't walk off the end */ + if ((middle + delta + 1) == count) + continue; + + /* Now try delta past middle */ + if (cmp_xe(&entries[middle + delta], + &entries[middle + delta + 1])) + return middle + delta + 1; + } + + /* Every entry had the same hash */ + return count; +} + +/* + * Move some xattrs in old bucket(blk) to new bucket(new_blk). * first_hash will record the 1st hash of the new bucket. + * + * Normally half of the xattrs will be moved. But we have to make + * sure that the xattrs with the same hash value are stored in the + * same bucket. If all the xattrs in this bucket have the same hash + * value, the new bucket will be initialized as an empty one and the + * first_hash will be initialized as (hash_value+1). */ -static int ocfs2_half_xattr_bucket(struct inode *inode, - handle_t *handle, - u64 blk, - u64 new_blk, - u32 *first_hash, - int new_bucket_head) +static int ocfs2_divide_xattr_bucket(struct inode *inode, + handle_t *handle, + u64 blk, + u64 new_blk, + u32 *first_hash, + int new_bucket_head) { int ret, i; - u16 count, start, len, name_value_len, xe_len, name_offset; + int count, start, len, name_value_len = 0, xe_len, name_offset = 0; u16 blk_per_bucket = ocfs2_blocks_per_xattr_bucket(inode->i_sb); struct buffer_head **s_bhs, **t_bhs = NULL; struct ocfs2_xattr_header *xh; struct ocfs2_xattr_entry *xe; int blocksize = inode->i_sb->s_blocksize; - mlog(0, "move half of xattrs from bucket %llu to %llu\n", + mlog(0, "move some of xattrs from bucket %llu to %llu\n", blk, new_blk); s_bhs = kcalloc(blk_per_bucket, sizeof(struct buffer_head *), GFP_NOFS); @@ -3171,14 +3219,35 @@ static int ocfs2_half_xattr_bucket(struct inode *inode, } } + xh = (struct ocfs2_xattr_header *)s_bhs[0]->b_data; + count = le16_to_cpu(xh->xh_count); + start = ocfs2_xattr_find_divide_pos(xh); + + if (start == count) { + xe = &xh->xh_entries[start-1]; + + /* + * initialized a new empty bucket here. + * The hash value is set as one larger than + * that of the last entry in the previous bucket. + */ + for (i = 0; i < blk_per_bucket; i++) + memset(t_bhs[i]->b_data, 0, blocksize); + + xh = (struct ocfs2_xattr_header *)t_bhs[0]->b_data; + xh->xh_free_start = cpu_to_le16(blocksize); + xh->xh_entries[0].xe_name_hash = xe->xe_name_hash; + le32_add_cpu(&xh->xh_entries[0].xe_name_hash, 1); + + goto set_num_buckets; + } + /* copy the whole bucket to the new first. */ for (i = 0; i < blk_per_bucket; i++) memcpy(t_bhs[i]->b_data, s_bhs[i]->b_data, blocksize); /* update the new bucket. */ xh = (struct ocfs2_xattr_header *)t_bhs[0]->b_data; - count = le16_to_cpu(xh->xh_count); - start = count / 2; /* * Calculate the total name/value len and xh_free_start for @@ -3235,6 +3304,7 @@ static int ocfs2_half_xattr_bucket(struct inode *inode, xh->xh_free_start = xe->xe_name_offset; } +set_num_buckets: /* set xh->xh_num_buckets for the new xh. */ if (new_bucket_head) xh->xh_num_buckets = cpu_to_le16(1); @@ -3252,9 +3322,13 @@ static int ocfs2_half_xattr_bucket(struct inode *inode, *first_hash = le32_to_cpu(xh->xh_entries[0].xe_name_hash); /* - * Now only update the 1st block of the old bucket. - * Please note that the entry has been sorted already above. + * Now only update the 1st block of the old bucket. If we + * just added a new empty bucket, there is no need to modify + * it. */ + if (start == count) + goto out; + xh = (struct ocfs2_xattr_header *)s_bhs[0]->b_data; memset(&xh->xh_entries[start], 0, sizeof(struct ocfs2_xattr_entry) * (count - start)); @@ -3439,15 +3513,15 @@ out: } /* - * Move half of the xattrs in this cluster to the new cluster. + * Move some xattrs in this cluster to the new cluster. * This function should only be called when bucket size == cluster size. * Otherwise ocfs2_mv_xattr_bucket_cross_cluster should be used instead. */ -static int ocfs2_half_xattr_cluster(struct inode *inode, - handle_t *handle, - u64 prev_blk, - u64 new_blk, - u32 *first_hash) +static int ocfs2_divide_xattr_cluster(struct inode *inode, + handle_t *handle, + u64 prev_blk, + u64 new_blk, + u32 *first_hash) { u16 blk_per_bucket = ocfs2_blocks_per_xattr_bucket(inode->i_sb); int ret, credits = 2 * blk_per_bucket; @@ -3461,8 +3535,8 @@ static int ocfs2_half_xattr_cluster(struct inode *inode, } /* Move half of the xattr in start_blk to the next bucket. */ - return ocfs2_half_xattr_bucket(inode, handle, prev_blk, - new_blk, first_hash, 1); + return ocfs2_divide_xattr_bucket(inode, handle, prev_blk, + new_blk, first_hash, 1); } /* @@ -3524,9 +3598,9 @@ static int ocfs2_adjust_xattr_cross_cluster(struct inode *inode, last_blk, new_blk, v_start); else { - ret = ocfs2_half_xattr_cluster(inode, handle, - last_blk, new_blk, - v_start); + ret = ocfs2_divide_xattr_cluster(inode, handle, + last_blk, new_blk, + v_start); if ((*header_bh)->b_blocknr == last_blk && extend) *extend = 0; @@ -3743,8 +3817,8 @@ static int ocfs2_extend_xattr_bucket(struct inode *inode, } /* Move half of the xattr in start_blk to the next bucket. */ - ret = ocfs2_half_xattr_bucket(inode, handle, start_blk, - start_blk + blk_per_bucket, NULL, 0); + ret = ocfs2_divide_xattr_bucket(inode, handle, start_blk, + start_blk + blk_per_bucket, NULL, 0); le16_add_cpu(&first_xh->xh_num_buckets, 1); ocfs2_journal_dirty(handle, first_bh); @@ -4435,11 +4509,21 @@ out: return ret; } -/* check whether the xattr bucket is filled up with the same hash value. */ +/* + * check whether the xattr bucket is filled up with the same hash value. + * If we want to insert the xattr with the same hash, return -ENOSPC. + * If we want to insert a xattr with different hash value, go ahead + * and ocfs2_divide_xattr_bucket will handle this. + */ static int ocfs2_check_xattr_bucket_collision(struct inode *inode, - struct ocfs2_xattr_bucket *bucket) + struct ocfs2_xattr_bucket *bucket, + const char *name) { struct ocfs2_xattr_header *xh = bucket->xh; + u32 name_hash = ocfs2_xattr_name_hash(inode, name, strlen(name)); + + if (name_hash != le32_to_cpu(xh->xh_entries[0].xe_name_hash)) + return 0; if (xh->xh_entries[le16_to_cpu(xh->xh_count) - 1].xe_name_hash == xh->xh_entries[0].xe_name_hash) { @@ -4562,7 +4646,9 @@ try_again: * one bucket's worth, so check it here whether we need to * add a new bucket for the insert. */ - ret = ocfs2_check_xattr_bucket_collision(inode, &xs->bucket); + ret = ocfs2_check_xattr_bucket_collision(inode, + &xs->bucket, + xi->name); if (ret) { mlog_errno(ret); goto out; -- cgit v1.2.3 From c435400140d24fbcb3da6b1e006be831f9056cb6 Mon Sep 17 00:00:00 2001 From: Dmitri Monakhov Date: Mon, 27 Oct 2008 13:01:49 -0700 Subject: ocfs2: truncate outstanding block after direct io failure Signed-off-by: Dmitri Monakhov Cc: Jeff Moyer Cc: Mark Fasheh Cc: Joel Becker Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Mark Fasheh --- fs/ocfs2/file.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 3138a385fdbb..e2570a3bc2b2 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1866,6 +1866,13 @@ relock: written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos, ppos, count, ocount); if (written < 0) { + /* + * direct write may have instantiated a few + * blocks outside i_size. Trim these off again. + * Don't need i_size_read because we hold i_mutex. + */ + if (*ppos + count > inode->i_size) + vmtruncate(inode, inode->i_size); ret = written; goto out_dio; } -- cgit v1.2.3 From de29c08528bae45e3fa1171d190f1340e37e0f70 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Wed, 29 Oct 2008 14:45:30 -0700 Subject: ocfs2: fix printk related build warnings in xattr.c Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index f3ea7efb48c6..70baffeb1812 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -2336,7 +2336,8 @@ static int ocfs2_xattr_index_block_find(struct inode *inode, BUG_ON(p_blkno == 0 || num_clusters == 0 || first_hash > name_hash); mlog(0, "find xattr extent rec %u clusters from %llu, the first hash " - "in the rec is %u\n", num_clusters, p_blkno, first_hash); + "in the rec is %u\n", num_clusters, (unsigned long long)p_blkno, + first_hash); ret = ocfs2_xattr_bucket_find(inode, name_index, name, name_hash, p_blkno, first_hash, num_clusters, xs); @@ -2360,7 +2361,7 @@ static int ocfs2_iterate_xattr_buckets(struct inode *inode, memset(&bucket, 0, sizeof(bucket)); mlog(0, "iterating xattr buckets in %u clusters starting from %llu\n", - clusters, blkno); + clusters, (unsigned long long)blkno); for (i = 0; i < num_buckets; i++, blkno += blk_per_bucket) { ret = ocfs2_read_blocks(inode, blkno, blk_per_bucket, @@ -2378,7 +2379,8 @@ static int ocfs2_iterate_xattr_buckets(struct inode *inode, if (i == 0) num_buckets = le16_to_cpu(bucket.xh->xh_num_buckets); - mlog(0, "iterating xattr bucket %llu, first hash %u\n", blkno, + mlog(0, "iterating xattr bucket %llu, first hash %u\n", + (unsigned long long)blkno, le32_to_cpu(bucket.xh->xh_entries[0].xe_name_hash)); if (func) { ret = func(inode, &bucket, para); @@ -2714,7 +2716,8 @@ static int ocfs2_xattr_create_index_block(struct inode *inode, */ blkno = ocfs2_clusters_to_blocks(inode->i_sb, bit_off); - mlog(0, "allocate 1 cluster from %llu to xattr block\n", blkno); + mlog(0, "allocate 1 cluster from %llu to xattr block\n", + (unsigned long long)blkno); xh_bh = sb_getblk(inode->i_sb, blkno); if (!xh_bh) { @@ -2883,8 +2886,8 @@ static int ocfs2_defrag_xattr_bucket(struct inode *inode, mlog(0, "adjust xattr bucket in %llu, count = %u, " "xh_free_start = %u, xh_name_value_len = %u.\n", - blkno, le16_to_cpu(xh->xh_count), xh_free_start, - le16_to_cpu(xh->xh_name_value_len)); + (unsigned long long)blkno, le16_to_cpu(xh->xh_count), + xh_free_start, le16_to_cpu(xh->xh_name_value_len)); /* * sort all the entries by their offset. @@ -3000,7 +3003,7 @@ static int ocfs2_mv_xattr_bucket_cross_cluster(struct inode *inode, prev_blkno += (num_clusters - 1) * bpc + bpc / 2; mlog(0, "move half of xattrs in cluster %llu to %llu\n", - prev_blkno, new_blkno); + (unsigned long long)prev_blkno, (unsigned long long)new_blkno); /* * We need to update the 1st half of the new cluster and @@ -3177,7 +3180,7 @@ static int ocfs2_divide_xattr_bucket(struct inode *inode, int blocksize = inode->i_sb->s_blocksize; mlog(0, "move some of xattrs from bucket %llu to %llu\n", - blk, new_blk); + (unsigned long long)blk, (unsigned long long)new_blk); s_bhs = kcalloc(blk_per_bucket, sizeof(struct buffer_head *), GFP_NOFS); if (!s_bhs) @@ -3376,7 +3379,8 @@ static int ocfs2_cp_xattr_bucket(struct inode *inode, BUG_ON(s_blkno == t_blkno); mlog(0, "cp bucket %llu to %llu, target is %d\n", - s_blkno, t_blkno, t_is_new); + (unsigned long long)s_blkno, (unsigned long long)t_blkno, + t_is_new); s_bhs = kzalloc(sizeof(struct buffer_head *) * blk_per_bucket, GFP_NOFS); @@ -3448,7 +3452,8 @@ static int ocfs2_cp_xattr_cluster(struct inode *inode, struct ocfs2_xattr_header *xh; u64 to_blk_start = to_blk; - mlog(0, "cp xattrs from cluster %llu to %llu\n", src_blk, to_blk); + mlog(0, "cp xattrs from cluster %llu to %llu\n", + (unsigned long long)src_blk, (unsigned long long)to_blk); /* * We need to update the new cluster and 1 more for the update of @@ -3579,7 +3584,8 @@ static int ocfs2_adjust_xattr_cross_cluster(struct inode *inode, int bpc = ocfs2_clusters_to_blocks(inode->i_sb, 1); mlog(0, "adjust xattrs from cluster %llu len %u to %llu\n", - prev_blk, prev_clusters, new_blk); + (unsigned long long)prev_blk, prev_clusters, + (unsigned long long)new_blk); if (ocfs2_xattr_buckets_per_cluster(OCFS2_SB(inode->i_sb)) > 1) ret = ocfs2_mv_xattr_bucket_cross_cluster(inode, @@ -3649,7 +3655,7 @@ static int ocfs2_add_new_xattr_cluster(struct inode *inode, mlog(0, "Add new xattr cluster for %llu, previous xattr hash = %u, " "previous xattr blkno = %llu\n", (unsigned long long)OCFS2_I(inode)->ip_blkno, - prev_cpos, prev_blkno); + prev_cpos, (unsigned long long)prev_blkno); ocfs2_init_xattr_tree_extent_tree(&et, inode, root_bh); @@ -3736,7 +3742,7 @@ static int ocfs2_add_new_xattr_cluster(struct inode *inode, } } mlog(0, "Insert %u clusters at block %llu for xattr at %u\n", - num_bits, block, v_start); + num_bits, (unsigned long long)block, v_start); ret = ocfs2_insert_extent(osb, handle, inode, &et, v_start, block, num_bits, 0, meta_ac); if (ret < 0) { @@ -3781,7 +3787,7 @@ static int ocfs2_extend_xattr_bucket(struct inode *inode, u16 bucket = le16_to_cpu(first_xh->xh_num_buckets); mlog(0, "extend xattr bucket in %llu, xattr extend rec starting " - "from %llu, len = %u\n", start_blk, + "from %llu, len = %u\n", (unsigned long long)start_blk, (unsigned long long)first_bh->b_blocknr, num_clusters); BUG_ON(bucket >= num_buckets); -- cgit v1.2.3 From 6c1e183e12dbd78a897a859f13220406296fee31 Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Sun, 2 Nov 2008 19:04:21 +0800 Subject: ocfs2: Check search result in ocfs2_xattr_block_get() ocfs2_xattr_block_get() calls ocfs2_xattr_search() to find an external xattr, but doesn't check the search result that is passed back via struct ocfs2_xattr_search. Add a check for search result, and pass back -ENODATA if the xattr search failed. This avoids a later NULL pointer error. Signed-off-by: Tiger Yang Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 70baffeb1812..054e2efb0b7e 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -777,6 +777,11 @@ static int ocfs2_xattr_block_get(struct inode *inode, goto cleanup; } + if (xs->not_found) { + ret = -ENODATA; + goto cleanup; + } + xb = (struct ocfs2_xattr_block *)xs->xattr_bh->b_data; size = le64_to_cpu(xs->here->xe_value_size); if (buffer) { @@ -860,7 +865,7 @@ static int ocfs2_xattr_get(struct inode *inode, down_read(&oi->ip_xattr_sem); ret = ocfs2_xattr_ibody_get(inode, name_index, name, buffer, buffer_size, &xis); - if (ret == -ENODATA) + if (ret == -ENODATA && di->i_xattr_loc) ret = ocfs2_xattr_block_get(inode, name_index, name, buffer, buffer_size, &xbs); up_read(&oi->ip_xattr_sem); -- cgit v1.2.3 From 29b143281657e0b064ee0553837cf9dd4d2441f9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 7 Nov 2008 22:57:16 -0800 Subject: Revert "sparc: correct section of current_pc()" This reverts commit 8dd9453737822469837d48d5da3785ce70fb2118. This fixes a boot failure reported by Robert Reif. The code above the section change expects to fallthrough, so we can't make such a section change here. --- arch/sparc/kernel/head.S | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S index 2fe2c117e772..2d325fd84579 100644 --- a/arch/sparc/kernel/head.S +++ b/arch/sparc/kernel/head.S @@ -465,7 +465,6 @@ gokernel: mov %o7, %g4 ! Save %o7 /* Jump to it, and pray... */ - __INIT current_pc: call 1f nop -- cgit v1.2.3 From 12de512ae1d6d150f95b7157cb3293ef7545676d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 10 Nov 2008 12:35:29 -0800 Subject: sparc64: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc64/defconfig | 232 +++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 195 insertions(+), 37 deletions(-) diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 82cab5cc8070..05d19a3e590f 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Fri Jul 18 00:47:07 2008 +# Linux kernel version: 2.6.28-rc4 +# Mon Nov 10 12:35:09 2008 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -62,7 +62,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -79,7 +78,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -92,9 +93,9 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,6 +127,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -138,7 +140,7 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_HOTPLUG_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_TICK_ONESHOT=y @@ -148,6 +150,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_NR_CPUS=64 # CONFIG_CPU_FREQ is not set +CONFIG_US3_MC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -169,7 +172,6 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y @@ -177,8 +179,10 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 +CONFIG_UNEVICTABLE_LRU=y CONFIG_SBUS=y CONFIG_SBUSCHAR=y CONFIG_SUN_AUXIO=y @@ -198,6 +202,8 @@ CONFIG_SUN_OPENPROMFS=m # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -207,10 +213,6 @@ CONFIG_SCHED_MC=y CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_CMDLINE_BOOL is not set - -# -# Networking -# CONFIG_NET=y # @@ -224,6 +226,7 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -299,7 +302,9 @@ CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set @@ -320,11 +325,10 @@ CONFIG_NET_TCPPROBE=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -375,21 +379,21 @@ CONFIG_MISC_DEVICES=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -413,10 +417,8 @@ CONFIG_BLK_DEV_ALI15X3=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -540,7 +542,6 @@ CONFIG_DM_ZERO=m # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -548,7 +549,22 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_SUNLANCE is not set @@ -565,6 +581,9 @@ CONFIG_SUNVNET=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -582,16 +601,15 @@ CONFIG_NET_PCI=y # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_MYRI_SBUS is not set @@ -607,18 +625,23 @@ CONFIG_TIGON3=m CONFIG_BNX2=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set CONFIG_NIU=m +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -694,9 +717,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -708,6 +733,7 @@ CONFIG_INPUT_SPARCSPKR=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set # @@ -725,6 +751,7 @@ CONFIG_SERIO_RAW=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -735,6 +762,7 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support @@ -762,6 +790,7 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # @@ -827,10 +856,13 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -882,6 +914,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_ULTRA45 is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -896,8 +929,14 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -924,6 +963,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -975,6 +1015,7 @@ CONFIG_FB_ATY_GX=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -983,7 +1024,10 @@ CONFIG_FB_ATY_GX=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1015,6 +1059,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_SUN_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1120,9 +1165,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1138,6 +1210,9 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1155,6 +1230,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1162,6 +1239,7 @@ CONFIG_USB_UHCI_HCD=m # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1191,7 +1269,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1204,7 +1281,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1222,21 +1299,80 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +CONFIG_RTC_DRV_M48T59=y +CONFIG_RTC_DRV_BQ4802=y +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SUN4V=y +CONFIG_RTC_DRV_STARFIRE=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Misc Linux/SPARC drivers # CONFIG_SUN_OPENPROMIO=y # CONFIG_OBP_FLASH is not set -# CONFIG_SUN_BPP is not set +# CONFIG_TADPOLE_TS102_UCTRL is not set # CONFIG_BBC_I2C is not set # CONFIG_ENVCTRL is not set # CONFIG_DISPLAY7SEG is not set @@ -1253,13 +1389,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -1290,6 +1427,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1311,6 +1449,7 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1388,6 +1527,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1408,20 +1549,30 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1436,6 +1587,7 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -1446,10 +1598,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1523,6 +1677,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1530,7 +1689,6 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set -- cgit v1.2.3 From ec5d7657f746c46b5fbb3dbec6d0f7d8b6b82961 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 10 Nov 2008 13:09:21 -0800 Subject: powerpc: Repair device bindings documentation Commit d0fc2eaaf4c56a95f5ed29b6bfb609e19714fc16 "powerpc/fsl: Refactor device bindings" split out a number of device bindings from booting-without-of.txt into separate files. Having them all in one file was a frequent source of merge conflicts. However, in the next merge, 49997d75152b3d23c53b0fa730599f2f74c92c65, there was another conflict. Some of the bindings removed from booting-without-of.txt were mistakenly added back in and the copies in dts-bindings were kept as well. This patch re-removes "Freescale Display Interface" and "Freescale on board FPGA" and fixes the table of contents. Signed-off-by: Trent Piepho Signed-off-by: Kumar Gala --- Documentation/powerpc/booting-without-of.txt | 65 +++++----------------------- 1 file changed, 10 insertions(+), 55 deletions(-) diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 02ea9a971b8e..0ab0230cbcb0 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -41,25 +41,14 @@ Table of Contents VI - System-on-a-chip devices and nodes 1) Defining child nodes of an SOC 2) Representing devices without a current OF specification - a) MDIO IO device - b) Gianfar-compatible ethernet nodes - c) PHY nodes - d) Interrupt controllers - e) I2C - f) Freescale SOC USB controllers - g) Freescale SOC SEC Security Engines - h) Board Control and Status (BCSR) - i) Freescale QUICC Engine module (QE) - j) CFI or JEDEC memory-mapped NOR flash - k) Global Utilities Block - l) Freescale Communications Processor Module - m) Chipselect/Local Bus - n) 4xx/Axon EMAC ethernet nodes - o) Xilinx IP cores - p) Freescale Synchronous Serial Interface - q) USB EHCI controllers - r) MDIO on GPIOs - s) SPI busses + a) PHY nodes + b) Interrupt controllers + c) CFI or JEDEC memory-mapped NOR flash + d) 4xx/Axon EMAC ethernet nodes + e) Xilinx IP cores + f) USB EHCI controllers + g) MDIO on GPIOs + h) SPI busses VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -1830,41 +1819,7 @@ platforms are moved over to use the flattened-device-tree model. big-endian; }; - r) Freescale Display Interface Unit - - The Freescale DIU is a LCD controller, with proper hardware, it can also - drive DVI monitors. - - Required properties: - - compatible : should be "fsl-diu". - - reg : should contain at least address and length of the DIU register - set. - - Interrupts : one DIU interrupt should be describe here. - - Example (MPC8610HPCD) - display@2c000 { - compatible = "fsl,diu"; - reg = <0x2c000 100>; - interrupts = <72 2>; - interrupt-parent = <&mpic>; - }; - - s) Freescale on board FPGA - - This is the memory-mapped registers for on board FPGA. - - Required properities: - - compatible : should be "fsl,fpga-pixis". - - reg : should contain the address and the lenght of the FPPGA register - set. - - Example (MPC8610HPCD) - board-control@e8000000 { - compatible = "fsl,fpga-pixis"; - reg = <0xe8000000 32>; - }; - - r) MDIO on GPIOs + g) MDIO on GPIOs Currently defined compatibles: - virtual,gpio-mdio @@ -1884,7 +1839,7 @@ platforms are moved over to use the flattened-device-tree model. &qe_pio_c 6>; }; - s) SPI (Serial Peripheral Interface) busses + h) SPI (Serial Peripheral Interface) busses SPI busses can be described with a node for the SPI master device and a set of child nodes for each SPI slave on the bus. For this -- cgit v1.2.3 From 1f8f5cf6e4f038552a3e47b66085452c08556d71 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 10 Nov 2008 19:00:05 +0000 Subject: KEYS: Make request key instantiate the per-user keyrings Make request_key() instantiate the per-user keyrings so that it doesn't oops if it needs to get hold of the user session keyring because there isn't a session keyring in place. Signed-off-by: David Howells Tested-by: Steve French Tested-by: Rutger Nijlunsing Signed-off-by: Linus Torvalds --- security/keys/internal.h | 1 + security/keys/process_keys.c | 2 +- security/keys/request_key.c | 4 ++++ 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/security/keys/internal.h b/security/keys/internal.h index b39f5c2e2c4b..239098f0fd76 100644 --- a/security/keys/internal.h +++ b/security/keys/internal.h @@ -107,6 +107,7 @@ extern key_ref_t search_process_keyrings(struct key_type *type, extern struct key *find_keyring_by_name(const char *name, bool skip_perm_check); +extern int install_user_keyrings(struct task_struct *tsk); extern int install_thread_keyring(struct task_struct *tsk); extern int install_process_keyring(struct task_struct *tsk); diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c index 5be6d018759a..45b240af6dbe 100644 --- a/security/keys/process_keys.c +++ b/security/keys/process_keys.c @@ -40,7 +40,7 @@ struct key_user root_key_user = { /* * install user and user session keyrings for a particular UID */ -static int install_user_keyrings(struct task_struct *tsk) +int install_user_keyrings(struct task_struct *tsk) { struct user_struct *user = tsk->user; struct key *uid_keyring, *session_keyring; diff --git a/security/keys/request_key.c b/security/keys/request_key.c index ba32ca6469bd..abea08f87fe2 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -74,6 +74,10 @@ static int call_sbin_request_key(struct key_construction *cons, kenter("{%d},{%d},%s", key->serial, authkey->serial, op); + ret = install_user_keyrings(tsk); + if (ret < 0) + goto error_alloc; + /* allocate a new session keyring */ sprintf(desc, "_req.%u", key->serial); -- cgit v1.2.3 From 4694516d1987303dd83bfd0efdd36fa5b65d701b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 10 Nov 2008 21:52:47 +0100 Subject: x86: Make NUMA on 32-bit depend on BROKEN While investigating the failure of hibernation on 32-bit x86 with CONFIG_NUMA set, as described in this message http://marc.info/?l=linux-kernel&m=122634118116226&w=4 I asked some people for help and I was told that it wasn't really worth the effort, because CONFIG_NUMA was generally broken on 32-bit x86 systems and it shouldn't be used in such configs. For this reason, make CONFIG_NUMA depend on BROKEN instead of EXPERIMENTAL on x86-32. Signed-off-by: Rafael J. Wysocki Cc: Andi Kleen Cc: Pavel Machek Cc: Peter Zijlstra Signed-off-by: Linus Torvalds --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4cf0ab13d187..93224b569187 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -957,7 +957,7 @@ config ARCH_PHYS_ADDR_T_64BIT config NUMA bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)" depends on SMP - depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL) + depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && BROKEN) default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) help -- cgit v1.2.3 From ee5f80a993539490a07477ff2526bf62c503fbb4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 7 Nov 2008 11:06:00 +0100 Subject: irq: call __irq_enter() before calling the tick_idle_check Impact: avoid spurious ksoftirqd wakeups The tick idle check which is called from irq_enter() was run before the call to __irq_enter() which did not set the in_interrupt() bits in preempt_count. That way the raise of a softirq woke up softirqd for nothing as the softirq was handled on return from interrupt. Call __irq_enter() before calling into the tick idle check code. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/softirq.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/kernel/softirq.c b/kernel/softirq.c index 7110daeb9a90..e7c69a720d69 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -269,10 +269,11 @@ void irq_enter(void) { int cpu = smp_processor_id(); - if (idle_cpu(cpu) && !in_interrupt()) + if (idle_cpu(cpu) && !in_interrupt()) { + __irq_enter(); tick_check_idle(cpu); - - __irq_enter(); + } else + __irq_enter(); } #ifdef __ARCH_IRQ_EXIT_IRQS_DISABLED -- cgit v1.2.3 From 309f796f301bf1c2731d9b9eb8642c76b523ebf7 Mon Sep 17 00:00:00 2001 From: Ferenc Wagner Date: Mon, 10 Nov 2008 13:37:40 -0800 Subject: vlan: Fix typos in proc output string Signed-off-by: Ferenc Wagner Signed-off-by: David S. Miller --- net/8021q/vlanproc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c index 0feefa4e1a4b..3628e0a81b40 100644 --- a/net/8021q/vlanproc.c +++ b/net/8021q/vlanproc.c @@ -314,7 +314,7 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset) dev_info->ingress_priority_map[6], dev_info->ingress_priority_map[7]); - seq_printf(seq, "EGRESSS priority Mappings: "); + seq_printf(seq, " EGRESS priority mappings: "); for (i = 0; i < 16; i++) { const struct vlan_priority_tci_mapping *mp = dev_info->egress_priority_map[i]; -- cgit v1.2.3 From ae99286b4f1be7788f2d6947c66a91dbd6351eec Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 10 Nov 2008 13:20:23 +0100 Subject: nohz: disable tick_nohz_kick_tick() for now Impact: nohz powersavings and wakeup regression commit fb02fbc14d17837b4b7b02dbb36142c16a7bf208 (NOHZ: restart tick device from irq_enter()) causes a serious wakeup regression. While the patch is correct it does not take into account that spurious wakeups happen on x86. A fix for this issue is available, but we just revert to the .27 behaviour and let long running softirqs screw themself. Disable it for now. Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 5bbb1044f847..342fc9ccab46 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -568,6 +568,9 @@ static void tick_nohz_switch_to_nohz(void) */ static void tick_nohz_kick_tick(int cpu) { +#if 0 + /* Switch back to 2.6.27 behaviour */ + struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); ktime_t delta, now; @@ -584,6 +587,7 @@ static void tick_nohz_kick_tick(int cpu) return; tick_nohz_restart(ts, now); +#endif } #else -- cgit v1.2.3 From 9581483444d002e0b3807d9e66f552f372a6fc5e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 6 Nov 2008 01:37:00 +0000 Subject: SSB: hide empty sub menu If the target system cannot support SSB, then don't show the menu option as it'll simply be an empty submenu. Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- drivers/ssb/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index 307b1f62d949..b1b947edcf01 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -1,10 +1,11 @@ -menu "Sonics Silicon Backplane" - config SSB_POSSIBLE bool depends on HAS_IOMEM && HAS_DMA default y +menu "Sonics Silicon Backplane" + depends on SSB_POSSIBLE + config SSB tristate "Sonics Silicon Backplane support" depends on SSB_POSSIBLE -- cgit v1.2.3 From fd0fcf5c29dd0339c5f5d86eb2cbe9fdad5bcd73 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 6 Nov 2008 10:49:21 +0000 Subject: ssb: Fix DMA-API compilation for non-PCI systems This fixes compilation of the SSB DMA-API code on non-PCI platforms. Signed-off-by: Michael Buesch Signed-off-by: David S. Miller --- include/linux/ssb/ssb.h | 42 +++++++++++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 7 deletions(-) diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index e530026eedf7..17d9b58f6379 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -427,12 +427,16 @@ static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr) { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST return pci_dma_mapping_error(dev->bus->host_pci, addr); +#endif + break; case SSB_BUSTYPE_SSB: return dma_mapping_error(dev->dev, addr); default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); return -ENOSYS; } @@ -441,12 +445,16 @@ static inline dma_addr_t ssb_dma_map_single(struct ssb_device *dev, void *p, { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST return pci_map_single(dev->bus->host_pci, p, size, dir); +#endif + break; case SSB_BUSTYPE_SSB: return dma_map_single(dev->dev, p, size, dir); default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); return 0; } @@ -455,14 +463,18 @@ static inline void ssb_dma_unmap_single(struct ssb_device *dev, dma_addr_t dma_a { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir); return; +#endif + break; case SSB_BUSTYPE_SSB: dma_unmap_single(dev->dev, dma_addr, size, dir); return; default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); } static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev, @@ -472,15 +484,19 @@ static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev, { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr, size, dir); return; +#endif + break; case SSB_BUSTYPE_SSB: dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir); return; default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); } static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev, @@ -490,15 +506,19 @@ static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev, { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr, size, dir); return; +#endif + break; case SSB_BUSTYPE_SSB: dma_sync_single_for_device(dev->dev, dma_addr, size, dir); return; default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); } static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev, @@ -509,17 +529,21 @@ static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev, { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST /* Just sync everything. That's all the PCI API can do. */ pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr, offset + size, dir); return; +#endif + break; case SSB_BUSTYPE_SSB: dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset, size, dir); return; default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); } static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev, @@ -530,17 +554,21 @@ static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev, { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST /* Just sync everything. That's all the PCI API can do. */ pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr, offset + size, dir); return; +#endif + break; case SSB_BUSTYPE_SSB: dma_sync_single_range_for_device(dev->dev, dma_addr, offset, size, dir); return; default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); } -- cgit v1.2.3 From c3d4f44f50b65b0b0290e357f8739cfb3f4bcaca Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Fri, 7 Nov 2008 01:45:52 +0000 Subject: [1/4] I/OAT: fix channel resources free for not allocated channels If the ioatdma driver is loaded but not used it does not allocate descriptors. Before it frees channel resources it should first be sure that they have been previously allocated. Cc: Signed-off-by: Maciej Sosnowski Tested-by: Tom Picard Signed-off-by: Dan Williams Signed-off-by: David S. Miller --- drivers/dma/ioat_dma.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index b0438c4f0c30..dbb8bbb83a32 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -807,6 +807,12 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan) struct ioat_desc_sw *desc, *_desc; int in_use_descs = 0; + /* Before freeing channel resources first check + * if they have been previously allocated for this channel. + */ + if (ioat_chan->desccount == 0) + return; + tasklet_disable(&ioat_chan->cleanup_task); ioat_dma_memcpy_cleanup(ioat_chan); @@ -869,6 +875,7 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan) ioat_chan->last_completion = ioat_chan->completion_addr = 0; ioat_chan->pending = 0; ioat_chan->dmacount = 0; + ioat_chan->desccount = 0; ioat_chan->watchdog_completion = 0; ioat_chan->last_compl_desc_addr_hw = 0; ioat_chan->watchdog_tcp_cookie = -- cgit v1.2.3 From c2c0b4c5434c0a25f7f7796b29155d53805909f5 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Fri, 7 Nov 2008 01:46:33 +0000 Subject: [2/4] I/OAT: fix dma_pin_iovec_pages() error handling Error handling needs to be modified in dma_pin_iovec_pages(). It should return NULL instead of ERR_PTR (pinned_list is checked for NULL in tcp_recvmsg() to determine if iovec pages have been successfully pinned down). In case of error for the first iovec, local_list->nr_iovecs needs to be initialized. Cc: Signed-off-by: Maciej Sosnowski Signed-off-by: David S. Miller --- drivers/dma/iovlock.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/dma/iovlock.c b/drivers/dma/iovlock.c index e763d723e4cf..9f6fe46a9b87 100644 --- a/drivers/dma/iovlock.c +++ b/drivers/dma/iovlock.c @@ -55,7 +55,6 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) int nr_iovecs = 0; int iovec_len_used = 0; int iovec_pages_used = 0; - long err; /* don't pin down non-user-based iovecs */ if (segment_eq(get_fs(), KERNEL_DS)) @@ -72,23 +71,21 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) local_list = kmalloc(sizeof(*local_list) + (nr_iovecs * sizeof (struct dma_page_list)) + (iovec_pages_used * sizeof (struct page*)), GFP_KERNEL); - if (!local_list) { - err = -ENOMEM; + if (!local_list) goto out; - } /* list of pages starts right after the page list array */ pages = (struct page **) &local_list->page_list[nr_iovecs]; + local_list->nr_iovecs = 0; + for (i = 0; i < nr_iovecs; i++) { struct dma_page_list *page_list = &local_list->page_list[i]; len -= iov[i].iov_len; - if (!access_ok(VERIFY_WRITE, iov[i].iov_base, iov[i].iov_len)) { - err = -EFAULT; + if (!access_ok(VERIFY_WRITE, iov[i].iov_base, iov[i].iov_len)) goto unpin; - } page_list->nr_pages = num_pages_spanned(&iov[i]); page_list->base_address = iov[i].iov_base; @@ -109,10 +106,8 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) NULL); up_read(¤t->mm->mmap_sem); - if (ret != page_list->nr_pages) { - err = -ENOMEM; + if (ret != page_list->nr_pages) goto unpin; - } local_list->nr_iovecs = i + 1; } @@ -122,7 +117,7 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) unpin: dma_unpin_iovec_pages(local_list); out: - return ERR_PTR(err); + return NULL; } void dma_unpin_iovec_pages(struct dma_pinned_list *pinned_list) -- cgit v1.2.3 From 12ccea24e309d815d058cdc6ee8bf2c4b85f0c5f Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Fri, 7 Nov 2008 01:46:55 +0000 Subject: [3/4] I/OAT: fix async_tx.callback checking async_tx.callback should be checked for the first not the last descriptor in the chain. Cc: Signed-off-by: Maciej Sosnowski Signed-off-by: David S. Miller --- drivers/dma/ioat_dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index dbb8bbb83a32..ecd743f7cc61 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -525,7 +525,7 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx) } hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS; - if (new->async_tx.callback) { + if (first->async_tx.callback) { hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN; if (first != new) { /* move callback into to last desc */ @@ -617,7 +617,7 @@ static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx) } hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_CP_STS; - if (new->async_tx.callback) { + if (first->async_tx.callback) { hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN; if (first != new) { /* move callback into to last desc */ -- cgit v1.2.3 From 1207e795568a368928dfd23d6817e47f2e8097e3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 7 Nov 2008 01:47:17 +0000 Subject: [4/4] dca: fixup initialization dependency Mark dca_init as a subsys_initcall since it needs to be ready to go before dependent drivers start registering themselves. Cc: Reported-and-tested-by: Mark Rustad Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams Signed-off-by: David S. Miller --- drivers/dca/dca-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c index ec249d2db633..d883e1b8bb8c 100644 --- a/drivers/dca/dca-core.c +++ b/drivers/dca/dca-core.c @@ -270,6 +270,6 @@ static void __exit dca_exit(void) dca_sysfs_exit(); } -module_init(dca_init); +subsys_initcall(dca_init); module_exit(dca_exit); -- cgit v1.2.3 From 87b30a6530218cde431a659f2c118cb72175507c Mon Sep 17 00:00:00 2001 From: Benjamin Thery Date: Mon, 10 Nov 2008 16:34:11 -0800 Subject: ipv6: fix ip6_mr_init error path The order of cleanup operations in the error/exit section of ip6_mr_init() is completely inversed. It should be the other way around. Also a del_timer() is missing in the error path. Signed-off-by: Benjamin Thery Signed-off-by: David S. Miller --- net/ipv6/ip6mr.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 182f8a177e7f..52a7eb0e2c2c 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -981,14 +981,15 @@ int __init ip6_mr_init(void) goto proc_cache_fail; #endif return 0; -reg_notif_fail: - kmem_cache_destroy(mrt_cachep); #ifdef CONFIG_PROC_FS -proc_vif_fail: - unregister_netdevice_notifier(&ip6_mr_notifier); proc_cache_fail: proc_net_remove(&init_net, "ip6_mr_vif"); +proc_vif_fail: + unregister_netdevice_notifier(&ip6_mr_notifier); #endif +reg_notif_fail: + del_timer(&ipmr_expire_timer); + kmem_cache_destroy(mrt_cachep); return err; } -- cgit v1.2.3 From b7b45f47d6f8c83a0f958d7e2924468b6942dd9e Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 10 Nov 2008 16:46:06 -0800 Subject: netfilter: payload_len is be16, add size of struct rather than size of pointer payload_len is a be16 value, not cpu_endian, also the size of a ponter to a struct ipv6hdr was being added, not the size of the struct itself. Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- net/netfilter/ipvs/ip_vs_xmit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c index 02ddc2b3ce2e..e90d52f199bc 100644 --- a/net/netfilter/ipvs/ip_vs_xmit.c +++ b/net/netfilter/ipvs/ip_vs_xmit.c @@ -713,7 +713,8 @@ ip_vs_tunnel_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, iph = ipv6_hdr(skb); iph->version = 6; iph->nexthdr = IPPROTO_IPV6; - iph->payload_len = old_iph->payload_len + sizeof(old_iph); + iph->payload_len = old_iph->payload_len; + be16_add_cpu(&iph->payload_len, sizeof(*old_iph)); iph->priority = old_iph->priority; memset(&iph->flow_lbl, 0, sizeof(iph->flow_lbl)); iph->daddr = rt->rt6i_dst.addr; -- cgit v1.2.3 From bf5e6519b85b3853f2d0bb4f17a4e2eaeffeb574 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 10 Nov 2008 21:46:00 -0500 Subject: ftrace: disable tracing on resize Impact: fix for bug on resize This patch addresses the bug found here: http://bugzilla.kernel.org/show_bug.cgi?id=11996 When ftrace converted to the new unified trace buffer, the resizing of the buffer was not protected as much as it was originally. If tracing is performed while the resize occurs, then the buffer can be corrupted. This patch disables all ftrace buffer modifications before a resize takes place. Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9f3b478f9171..abfa8103d046 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2676,7 +2676,7 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, { unsigned long val; char buf[64]; - int ret; + int ret, cpu; struct trace_array *tr = filp->private_data; if (cnt >= sizeof(buf)) @@ -2704,6 +2704,14 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, goto out; } + /* disable all cpu buffers */ + for_each_tracing_cpu(cpu) { + if (global_trace.data[cpu]) + atomic_inc(&global_trace.data[cpu]->disabled); + if (max_tr.data[cpu]) + atomic_inc(&max_tr.data[cpu]->disabled); + } + if (val != global_trace.entries) { ret = ring_buffer_resize(global_trace.buffer, val); if (ret < 0) { @@ -2735,6 +2743,13 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, if (tracing_disabled) cnt = -ENOMEM; out: + for_each_tracing_cpu(cpu) { + if (global_trace.data[cpu]) + atomic_dec(&global_trace.data[cpu]->disabled); + if (max_tr.data[cpu]) + atomic_dec(&max_tr.data[cpu]->disabled); + } + max_tr.entries = global_trace.entries; mutex_unlock(&trace_types_lock); -- cgit v1.2.3 From 4143c5cb36331155a1823af8b3a8c761a59fed71 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 10 Nov 2008 21:46:01 -0500 Subject: ring-buffer: prevent infinite looping on time stamping Impact: removal of unnecessary looping The lockless part of the ring buffer allows for reentry into the code from interrupts. A timestamp is taken, a test is preformed and if it detects that an interrupt occurred that did tracing, it tries again. The problem arises if the timestamp code itself causes a trace. The detection will detect this and loop again. The difference between this and an interrupt doing tracing, is that this will fail every time, and cause an infinite loop. Currently, we test if the loop happens 1000 times, and if so, it will produce a warning and disable the ring buffer. The problem with this approach is that it makes it difficult to perform some types of tracing (tracing the timestamp code itself). Each trace entry has a delta timestamp from the previous entry. If a trace entry is reserved but and interrupt occurs and traces before the previous entry is commited, the delta timestamp for that entry will be zero. This actually makes sense in terms of tracing, because the interrupt entry happened before the preempted entry was commited, so one may consider the two happening at the same time. The order is still preserved in the buffer. With this idea, instead of trying to get a new timestamp if an interrupt made it in between the timestamp and the test, the entry could simply make the delta zero and continue. This will prevent interrupts or tracers in the timer code from causing the above loop. Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 3f3380638646..2f76193c3489 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1060,7 +1060,7 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer, /* Did the write stamp get updated already? */ if (unlikely(ts < cpu_buffer->write_stamp)) - goto again; + delta = 0; if (test_time_stamp(delta)) { -- cgit v1.2.3 From 013cd397532e5803a1625954a884d021653da720 Mon Sep 17 00:00:00 2001 From: Jianjun Kong Date: Mon, 10 Nov 2008 21:37:39 -0800 Subject: mac80211: fix a buffer overrun in station debug code net/mac80211/debugfs_sta.c The trailing zero was written to state[4], it's out of bounds. Signed-off-by: Jianjun Kong Signed-off-by: David S. Miller --- net/mac80211/debugfs_sta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 189d0bafa91a..b85c4f27b361 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -199,7 +199,7 @@ static ssize_t sta_agg_status_write(struct file *file, /* toggle Rx aggregation command */ tid_num = tid_num - 100; if (tid_static_rx[tid_num] == 1) { - strcpy(state, "off "); + strcpy(state, "off"); ieee80211_sta_stop_rx_ba_session(sta->sdata, da, tid_num, 0, WLAN_REASON_QSTA_REQUIRE_SETUP); sta->ampdu_mlme.tid_state_rx[tid_num] |= -- cgit v1.2.3 From b971e7ac834e9f4bda96d5a96ae9abccd01c1dd8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 10 Nov 2008 21:43:08 -0800 Subject: net: fix /proc/net/snmp as memory corruptor icmpmsg_put() can happily corrupt kernel memory, using a static table and forgetting to reset an array index in a loop. Remove the static array since its not safe without proper locking. Signed-off-by: Alexey Dobriyan Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/proc.c | 58 +++++++++++++++++++++++++++++---------------------------- 1 file changed, 30 insertions(+), 28 deletions(-) diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index 8f5a403f6f6b..a631a1f110ca 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -237,43 +237,45 @@ static const struct snmp_mib snmp4_net_list[] = { SNMP_MIB_SENTINEL }; +static void icmpmsg_put_line(struct seq_file *seq, unsigned long *vals, + unsigned short *type, int count) +{ + int j; + + if (count) { + seq_printf(seq, "\nIcmpMsg:"); + for (j = 0; j < count; ++j) + seq_printf(seq, " %sType%u", + type[j] & 0x100 ? "Out" : "In", + type[j] & 0xff); + seq_printf(seq, "\nIcmpMsg:"); + for (j = 0; j < count; ++j) + seq_printf(seq, " %lu", vals[j]); + } +} + static void icmpmsg_put(struct seq_file *seq) { #define PERLINE 16 - int j, i, count; - static int out[PERLINE]; + int i, count; + unsigned short type[PERLINE]; + unsigned long vals[PERLINE], val; struct net *net = seq->private; count = 0; for (i = 0; i < ICMPMSG_MIB_MAX; i++) { - - if (snmp_fold_field((void **) net->mib.icmpmsg_statistics, i)) - out[count++] = i; - if (count < PERLINE) - continue; - - seq_printf(seq, "\nIcmpMsg:"); - for (j = 0; j < PERLINE; ++j) - seq_printf(seq, " %sType%u", i & 0x100 ? "Out" : "In", - i & 0xff); - seq_printf(seq, "\nIcmpMsg: "); - for (j = 0; j < PERLINE; ++j) - seq_printf(seq, " %lu", - snmp_fold_field((void **) net->mib.icmpmsg_statistics, - out[j])); - seq_putc(seq, '\n'); - } - if (count) { - seq_printf(seq, "\nIcmpMsg:"); - for (j = 0; j < count; ++j) - seq_printf(seq, " %sType%u", out[j] & 0x100 ? "Out" : - "In", out[j] & 0xff); - seq_printf(seq, "\nIcmpMsg:"); - for (j = 0; j < count; ++j) - seq_printf(seq, " %lu", snmp_fold_field((void **) - net->mib.icmpmsg_statistics, out[j])); + val = snmp_fold_field((void **) net->mib.icmpmsg_statistics, i); + if (val) { + type[count] = i; + vals[count++] = val; + } + if (count == PERLINE) { + icmpmsg_put_line(seq, vals, type, count); + count = 0; + } } + icmpmsg_put_line(seq, vals, type, count); #undef PERLINE } -- cgit v1.2.3 From 5cd33db2120b5ce972568711156f91da83bff2d7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 10 Nov 2008 21:45:05 -0800 Subject: net: fix setting of skb->tail in skb_recycle_check() Since skb_reset_tail_pointer() reads skb->data, we need to set skb->data before calling skb_reset_tail_pointer(). This was causing spurious skb_over_panic()s from skb_put() being called on a recycled skb that had its skb->tail set to beyond where it should have been. Bug report from Peter van Valderen . Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- net/core/skbuff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index ebb6b94f8af2..d49ef8301b5b 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -486,8 +486,8 @@ int skb_recycle_check(struct sk_buff *skb, int skb_size) shinfo->frag_list = NULL; memset(skb, 0, offsetof(struct sk_buff, tail)); - skb_reset_tail_pointer(skb); skb->data = skb->head + NET_SKB_PAD; + skb_reset_tail_pointer(skb); return 1; } -- cgit v1.2.3 From 14ee6742b1b5df275cd2d771b4562b4f808c9419 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 10 Nov 2008 21:52:42 -0800 Subject: dsa: fix skb->pkt_type when mac address of slave interface differs When a dsa slave interface has a mac address that differs from that of the master interface, eth_type_trans() won't explicitly set skb->pkt_type back to PACKET_HOST -- we need to do this ourselves before calling eth_type_trans(). Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- net/dsa/tag_dsa.c | 1 + net/dsa/tag_edsa.c | 1 + net/dsa/tag_trailer.c | 1 + 3 files changed, 3 insertions(+) diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c index bdc0510b53b7..31866543332e 100644 --- a/net/dsa/tag_dsa.c +++ b/net/dsa/tag_dsa.c @@ -159,6 +159,7 @@ static int dsa_rcv(struct sk_buff *skb, struct net_device *dev, skb->dev = ds->ports[source_port]; skb_push(skb, ETH_HLEN); + skb->pkt_type = PACKET_HOST; skb->protocol = eth_type_trans(skb, skb->dev); skb->dev->last_rx = jiffies; diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c index f985ea993843..9f4ce55eae59 100644 --- a/net/dsa/tag_edsa.c +++ b/net/dsa/tag_edsa.c @@ -178,6 +178,7 @@ static int edsa_rcv(struct sk_buff *skb, struct net_device *dev, skb->dev = ds->ports[source_port]; skb_push(skb, ETH_HLEN); + skb->pkt_type = PACKET_HOST; skb->protocol = eth_type_trans(skb, skb->dev); skb->dev->last_rx = jiffies; diff --git a/net/dsa/tag_trailer.c b/net/dsa/tag_trailer.c index d3117764b2c2..efd26697e716 100644 --- a/net/dsa/tag_trailer.c +++ b/net/dsa/tag_trailer.c @@ -95,6 +95,7 @@ static int trailer_rcv(struct sk_buff *skb, struct net_device *dev, skb->dev = ds->ports[source_port]; skb_push(skb, ETH_HLEN); + skb->pkt_type = PACKET_HOST; skb->protocol = eth_type_trans(skb, skb->dev); skb->dev->last_rx = jiffies; -- cgit v1.2.3 From df02c6ff2e3937379b31ea161b53229134fe92f7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 10 Nov 2008 21:53:12 -0800 Subject: dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings and Peter van Valderen . Signed-off-by: Lennert Buytenhek Tested-by: Dirk Teurlings Tested-by: Peter van Valderen Signed-off-by: David S. Miller --- net/dsa/slave.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 70 insertions(+), 2 deletions(-) diff --git a/net/dsa/slave.c b/net/dsa/slave.c index 37616884b8a9..1af5a79309e9 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -10,6 +10,7 @@ #include #include +#include #include #include "dsa_priv.h" @@ -49,11 +50,57 @@ void dsa_slave_mii_bus_init(struct dsa_switch *ds) /* slave device handling ****************************************************/ static int dsa_slave_open(struct net_device *dev) { + struct dsa_slave_priv *p = netdev_priv(dev); + struct net_device *master = p->parent->master_netdev; + int err; + + if (!(master->flags & IFF_UP)) + return -ENETDOWN; + + if (compare_ether_addr(dev->dev_addr, master->dev_addr)) { + err = dev_unicast_add(master, dev->dev_addr, ETH_ALEN); + if (err < 0) + goto out; + } + + if (dev->flags & IFF_ALLMULTI) { + err = dev_set_allmulti(master, 1); + if (err < 0) + goto del_unicast; + } + if (dev->flags & IFF_PROMISC) { + err = dev_set_promiscuity(master, 1); + if (err < 0) + goto clear_allmulti; + } + return 0; + +clear_allmulti: + if (dev->flags & IFF_ALLMULTI) + dev_set_allmulti(master, -1); +del_unicast: + if (compare_ether_addr(dev->dev_addr, master->dev_addr)) + dev_unicast_delete(master, dev->dev_addr, ETH_ALEN); +out: + return err; } static int dsa_slave_close(struct net_device *dev) { + struct dsa_slave_priv *p = netdev_priv(dev); + struct net_device *master = p->parent->master_netdev; + + dev_mc_unsync(master, dev); + dev_unicast_unsync(master, dev); + if (dev->flags & IFF_ALLMULTI) + dev_set_allmulti(master, -1); + if (dev->flags & IFF_PROMISC) + dev_set_promiscuity(master, -1); + + if (compare_ether_addr(dev->dev_addr, master->dev_addr)) + dev_unicast_delete(master, dev->dev_addr, ETH_ALEN); + return 0; } @@ -77,9 +124,30 @@ static void dsa_slave_set_rx_mode(struct net_device *dev) dev_unicast_sync(master, dev); } -static int dsa_slave_set_mac_address(struct net_device *dev, void *addr) +static int dsa_slave_set_mac_address(struct net_device *dev, void *a) { - memcpy(dev->dev_addr, addr + 2, 6); + struct dsa_slave_priv *p = netdev_priv(dev); + struct net_device *master = p->parent->master_netdev; + struct sockaddr *addr = a; + int err; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + if (!(dev->flags & IFF_UP)) + goto out; + + if (compare_ether_addr(addr->sa_data, master->dev_addr)) { + err = dev_unicast_add(master, addr->sa_data, ETH_ALEN); + if (err < 0) + return err; + } + + if (compare_ether_addr(dev->dev_addr, master->dev_addr)) + dev_unicast_delete(master, dev->dev_addr, ETH_ALEN); + +out: + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); return 0; } -- cgit v1.2.3 From ad474caca3e2a0550b7ce0706527ad5ab389a4d4 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 10 Nov 2008 15:39:30 +0100 Subject: fix for account_group_exec_runtime(), make sure ->signal can't be freed under rq->lock Impact: fix hang/crash on ia64 under high load This is ugly, but the simplest patch by far. Unlike other similar routines, account_group_exec_runtime() could be called "implicitly" from within scheduler after exit_notify(). This means we can race with the parent doing release_task(), we can't just check ->signal != NULL. Change __exit_signal() to do spin_unlock_wait(&task_rq(tsk)->lock) before __cleanup_signal() to make sure ->signal can't be freed under task_rq(tsk)->lock. Note that task_rq_unlock_wait() doesn't care about the case when tsk changes cpu/rq under us, this should be OK. Thanks to Ingo who nacked my previous buggy patch. Signed-off-by: Oleg Nesterov Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar Reported-by: Doug Chapman --- include/linux/sched.h | 1 + kernel/exit.c | 5 +++++ kernel/sched.c | 8 ++++++++ 3 files changed, 14 insertions(+) diff --git a/include/linux/sched.h b/include/linux/sched.h index 295b7c756ca6..644ffbda17ca 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -247,6 +247,7 @@ extern void init_idle(struct task_struct *idle, int cpu); extern void init_idle_bootup_task(struct task_struct *idle); extern int runqueue_is_locked(void); +extern void task_rq_unlock_wait(struct task_struct *p); extern cpumask_t nohz_cpu_mask; #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ) diff --git a/kernel/exit.c b/kernel/exit.c index 80137a5d9467..ae2b92be5fae 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -141,6 +141,11 @@ static void __exit_signal(struct task_struct *tsk) if (sig) { flush_sigqueue(&sig->shared_pending); taskstats_tgid_free(sig); + /* + * Make sure ->signal can't go away under rq->lock, + * see account_group_exec_runtime(). + */ + task_rq_unlock_wait(tsk); __cleanup_signal(sig); } } diff --git a/kernel/sched.c b/kernel/sched.c index f3149244e324..50a21f964679 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -969,6 +969,14 @@ static struct rq *task_rq_lock(struct task_struct *p, unsigned long *flags) } } +void task_rq_unlock_wait(struct task_struct *p) +{ + struct rq *rq = task_rq(p); + + smp_mb(); /* spin-unlock-wait is not a full memory barrier */ + spin_unlock_wait(&rq->lock); +} + static void __task_rq_unlock(struct rq *rq) __releases(rq->lock) { -- cgit v1.2.3 From 881ee9889c8b98671c5491e43666bf5d4f78a180 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 2 Nov 2008 23:08:44 -0800 Subject: i915: Save/restore MCHBAR_RENDER_STANDBY on GM965/GM45 This register is set by the 2D driver to prevent lockups, and so it needs to be preserved across suspend/resume too. This makes my X200s work. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/i915_suspend.c | 9 +++++++++ 3 files changed, 13 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 572dcd0e3e0d..be56b0ba88c4 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -157,6 +157,7 @@ typedef struct drm_i915_private { u32 saveDSPACNTR; u32 saveDSPBCNTR; u32 saveDSPARB; + u32 saveRENDERSTANDBY; u32 savePIPEACONF; u32 savePIPEBCONF; u32 savePIPEASRC; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5c2d9f206d05..0e476eba36e6 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -527,6 +527,9 @@ #define C0DRB3 0x10206 #define C1DRB3 0x10606 +/** GM965 GM45 render standby register */ +#define MCHBAR_RENDER_STANDBY 0x111B8 + /* * Overlay regs */ diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 603fe742ccd4..5ddc6e595c0c 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -240,6 +240,10 @@ int i915_save_state(struct drm_device *dev) pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + /* Render Standby */ + if (IS_I965G(dev) && IS_MOBILE(dev)) + dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); + /* Display arbitration control */ dev_priv->saveDSPARB = I915_READ(DSPARB); @@ -365,6 +369,11 @@ int i915_restore_state(struct drm_device *dev) pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); + /* Render Standby */ + if (IS_I965G(dev) && IS_MOBILE(dev)) + I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY); + + /* Display arbitration */ I915_WRITE(DSPARB, dev_priv->saveDSPARB); /* Pipe & plane A info */ -- cgit v1.2.3 From ad42ca8f4490de06462aee234ea0083cbd8b46aa Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 2 Nov 2008 23:38:20 -0800 Subject: i915: Clean up sarea pointers on leavevt This corresponds to the setup of the sarea pointers in DMA initialization, though neither is exactly the point at which the sarea is set up or torn down. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 256e22963ae4..79944460d70a 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -154,6 +154,9 @@ static int i915_dma_cleanup(struct drm_device * dev) if (I915_NEED_GFX_HWS(dev)) i915_free_hws(dev); + dev_priv->sarea = NULL; + dev_priv->sarea_priv = NULL; + return 0; } -- cgit v1.2.3 From 6a47baa6ce7e6fb5fed8d1fd0af36a96a4ad133f Mon Sep 17 00:00:00 2001 From: Owen Taylor Date: Mon, 3 Nov 2008 14:38:17 -0800 Subject: i915: Don't attempt to short-circuit object_wait_rendering by checking domains. This could return early when reading after writing a buffer, if somebody had already put it on the flushing list (write domains are 0, but still active), leading to glReadPixels failure. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b0ec73fa6a93..6b4a2bd20640 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1455,11 +1455,9 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj, read_domains, write_domain); /* Wait on any GPU rendering to the object to be flushed. */ - if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) { - ret = i915_gem_object_wait_rendering(obj); - if (ret) - return ret; - } + ret = i915_gem_object_wait_rendering(obj); + if (ret) + return ret; if (obj_priv->page_cpu_valid == NULL) { obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, -- cgit v1.2.3 From d3e74d0237b102d34979015fbf6df02ca4413074 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 3 Nov 2008 14:46:17 -0800 Subject: i915: Don't whine when pci_enable_msi() fails. This probably just means the chipset doesn't support MSI, which is fine. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 79944460d70a..9d4278be0ca0 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -852,8 +852,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) * be lost or delayed */ if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev)) - if (pci_enable_msi(dev->pdev)) - DRM_ERROR("failed to enable MSI\n"); + pci_enable_msi(dev->pdev); intel_opregion_init(dev); -- cgit v1.2.3 From bd95e0a4a6bb9485fe35dda62719663f6ceabae1 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 4 Nov 2008 12:01:24 -0800 Subject: i915: Remove racy delayed vblank swap ioctl. When userland detected that this ioctl was supported (by version number check), it used it in a racy way -- dispatch delayed swap, wait for vblank, continue rendering. As there was no mechanism for it to wait for the swap to finish, sometimes it would render before the swap and garbage would be displayed on the screen. By removing the ioctl and returning -EINVAL, userland returns to its previous, correct rendering path of waiting for a vblank then dispatching a swap. The only path that could have used this ioctl correctly was page flipping, which relied on only one client running and emitting wait-for-vblank-before-rendering in the command stream. That path also falls back correctly, at the performance cost of not being able to queue up rendering before the flip occurs. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_drv.h | 15 -- drivers/gpu/drm/i915/i915_irq.c | 377 ++-------------------------------------- 2 files changed, 14 insertions(+), 378 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index be56b0ba88c4..4afbadb13316 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -88,13 +88,6 @@ struct mem_block { struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */ }; -typedef struct _drm_i915_vbl_swap { - struct list_head head; - drm_drawable_t drw_id; - unsigned int pipe; - unsigned int sequence; -} drm_i915_vbl_swap_t; - struct opregion_header; struct opregion_acpi; struct opregion_swsci; @@ -146,10 +139,6 @@ typedef struct drm_i915_private { unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds; int vblank_pipe; - spinlock_t swaps_lock; - drm_i915_vbl_swap_t vbl_swaps; - unsigned int swaps_pending; - struct intel_opregion opregion; /* Register state */ @@ -242,9 +231,6 @@ typedef struct drm_i915_private { u8 saveDACDATA[256*3]; /* 256 3-byte colors */ u8 saveCR[37]; - /** Work task for vblank-related ring access */ - struct work_struct vblank_work; - struct { struct drm_mm gtt_space; @@ -445,7 +431,6 @@ extern int i915_irq_wait(struct drm_device *dev, void *data, void i915_user_irq_get(struct drm_device *dev); void i915_user_irq_put(struct drm_device *dev); -extern void i915_vblank_work_handler(struct work_struct *work); extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); extern void i915_driver_irq_preinstall(struct drm_device * dev); extern int i915_driver_irq_postinstall(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 26f48932a51e..a75345af62ef 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -80,211 +80,6 @@ i915_pipe_enabled(struct drm_device *dev, int pipe) return 0; } -/** - * Emit blits for scheduled buffer swaps. - * - * This function will be called with the HW lock held. - * Because this function must grab the ring mutex (dev->struct_mutex), - * it can no longer run at soft irq time. We'll fix this when we do - * the DRI2 swap buffer work. - */ -static void i915_vblank_tasklet(struct drm_device *dev) -{ - drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - unsigned long irqflags; - struct list_head *list, *tmp, hits, *hit; - int nhits, nrects, slice[2], upper[2], lower[2], i; - unsigned counter[2]; - struct drm_drawable_info *drw; - drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv; - u32 cpp = dev_priv->cpp; - u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD | - XY_SRC_COPY_BLT_WRITE_ALPHA | - XY_SRC_COPY_BLT_WRITE_RGB) - : XY_SRC_COPY_BLT_CMD; - u32 src_pitch = sarea_priv->pitch * cpp; - u32 dst_pitch = sarea_priv->pitch * cpp; - u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24); - RING_LOCALS; - - mutex_lock(&dev->struct_mutex); - - if (IS_I965G(dev) && sarea_priv->front_tiled) { - cmd |= XY_SRC_COPY_BLT_DST_TILED; - dst_pitch >>= 2; - } - if (IS_I965G(dev) && sarea_priv->back_tiled) { - cmd |= XY_SRC_COPY_BLT_SRC_TILED; - src_pitch >>= 2; - } - - counter[0] = drm_vblank_count(dev, 0); - counter[1] = drm_vblank_count(dev, 1); - - DRM_DEBUG("\n"); - - INIT_LIST_HEAD(&hits); - - nhits = nrects = 0; - - spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); - - /* Find buffer swaps scheduled for this vertical blank */ - list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) { - drm_i915_vbl_swap_t *vbl_swap = - list_entry(list, drm_i915_vbl_swap_t, head); - int pipe = vbl_swap->pipe; - - if ((counter[pipe] - vbl_swap->sequence) > (1<<23)) - continue; - - list_del(list); - dev_priv->swaps_pending--; - drm_vblank_put(dev, pipe); - - spin_unlock(&dev_priv->swaps_lock); - spin_lock(&dev->drw_lock); - - drw = drm_get_drawable_info(dev, vbl_swap->drw_id); - - list_for_each(hit, &hits) { - drm_i915_vbl_swap_t *swap_cmp = - list_entry(hit, drm_i915_vbl_swap_t, head); - struct drm_drawable_info *drw_cmp = - drm_get_drawable_info(dev, swap_cmp->drw_id); - - /* Make sure both drawables are still - * around and have some rectangles before - * we look inside to order them for the - * blts below. - */ - if (drw_cmp && drw_cmp->num_rects > 0 && - drw && drw->num_rects > 0 && - drw_cmp->rects[0].y1 > drw->rects[0].y1) { - list_add_tail(list, hit); - break; - } - } - - spin_unlock(&dev->drw_lock); - - /* List of hits was empty, or we reached the end of it */ - if (hit == &hits) - list_add_tail(list, hits.prev); - - nhits++; - - spin_lock(&dev_priv->swaps_lock); - } - - if (nhits == 0) { - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - mutex_unlock(&dev->struct_mutex); - return; - } - - spin_unlock(&dev_priv->swaps_lock); - - i915_kernel_lost_context(dev); - - if (IS_I965G(dev)) { - BEGIN_LP_RING(4); - - OUT_RING(GFX_OP_DRAWRECT_INFO_I965); - OUT_RING(0); - OUT_RING(((sarea_priv->width - 1) & 0xffff) | ((sarea_priv->height - 1) << 16)); - OUT_RING(0); - ADVANCE_LP_RING(); - } else { - BEGIN_LP_RING(6); - - OUT_RING(GFX_OP_DRAWRECT_INFO); - OUT_RING(0); - OUT_RING(0); - OUT_RING(sarea_priv->width | sarea_priv->height << 16); - OUT_RING(sarea_priv->width | sarea_priv->height << 16); - OUT_RING(0); - - ADVANCE_LP_RING(); - } - - sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT; - - upper[0] = upper[1] = 0; - slice[0] = max(sarea_priv->pipeA_h / nhits, 1); - slice[1] = max(sarea_priv->pipeB_h / nhits, 1); - lower[0] = sarea_priv->pipeA_y + slice[0]; - lower[1] = sarea_priv->pipeB_y + slice[0]; - - spin_lock(&dev->drw_lock); - - /* Emit blits for buffer swaps, partitioning both outputs into as many - * slices as there are buffer swaps scheduled in order to avoid tearing - * (based on the assumption that a single buffer swap would always - * complete before scanout starts). - */ - for (i = 0; i++ < nhits; - upper[0] = lower[0], lower[0] += slice[0], - upper[1] = lower[1], lower[1] += slice[1]) { - if (i == nhits) - lower[0] = lower[1] = sarea_priv->height; - - list_for_each(hit, &hits) { - drm_i915_vbl_swap_t *swap_hit = - list_entry(hit, drm_i915_vbl_swap_t, head); - struct drm_clip_rect *rect; - int num_rects, pipe; - unsigned short top, bottom; - - drw = drm_get_drawable_info(dev, swap_hit->drw_id); - - /* The drawable may have been destroyed since - * the vblank swap was queued - */ - if (!drw) - continue; - - rect = drw->rects; - pipe = swap_hit->pipe; - top = upper[pipe]; - bottom = lower[pipe]; - - for (num_rects = drw->num_rects; num_rects--; rect++) { - int y1 = max(rect->y1, top); - int y2 = min(rect->y2, bottom); - - if (y1 >= y2) - continue; - - BEGIN_LP_RING(8); - - OUT_RING(cmd); - OUT_RING(ropcpp | dst_pitch); - OUT_RING((y1 << 16) | rect->x1); - OUT_RING((y2 << 16) | rect->x2); - OUT_RING(sarea_priv->front_offset); - OUT_RING((y1 << 16) | rect->x1); - OUT_RING(src_pitch); - OUT_RING(sarea_priv->back_offset); - - ADVANCE_LP_RING(); - } - } - } - - spin_unlock_irqrestore(&dev->drw_lock, irqflags); - mutex_unlock(&dev->struct_mutex); - - list_for_each_safe(hit, tmp, &hits) { - drm_i915_vbl_swap_t *swap_hit = - list_entry(hit, drm_i915_vbl_swap_t, head); - - list_del(hit); - - drm_free(swap_hit, sizeof(*swap_hit), DRM_MEM_DRIVER); - } -} - /* Called from drm generic code, passed a 'crtc', which * we use as a pipe index */ @@ -322,40 +117,6 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) return count; } -void -i915_vblank_work_handler(struct work_struct *work) -{ - drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, - vblank_work); - struct drm_device *dev = dev_priv->dev; - unsigned long irqflags; - - if (dev->lock.hw_lock == NULL) { - i915_vblank_tasklet(dev); - return; - } - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - dev->locked_tasklet_func = i915_vblank_tasklet; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - /* Try to get the lock now, if this fails, the lock - * holder will execute the tasklet during unlock - */ - if (!drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT)) - return; - - dev->lock.lock_time = jiffies; - atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - dev->locked_tasklet_func = NULL; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - i915_vblank_tasklet(dev); - drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT); -} - irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; @@ -433,9 +194,6 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) if (iir & I915_ASLE_INTERRUPT) opregion_asle_intr(dev); - if (vblank && dev_priv->swaps_pending > 0) - schedule_work(&dev_priv->vblank_work); - return IRQ_HANDLED; } @@ -696,123 +454,21 @@ int i915_vblank_pipe_get(struct drm_device *dev, void *data, int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv = dev->dev_private; - drm_i915_vblank_swap_t *swap = data; - drm_i915_vbl_swap_t *vbl_swap, *vbl_old; - unsigned int pipe, seqtype, curseq; - unsigned long irqflags; - struct list_head *list; - int ret; - - if (!dev_priv || !dev_priv->sarea_priv) { - DRM_ERROR("%s called with no initialization\n", __func__); - return -EINVAL; - } - - if (dev_priv->sarea_priv->rotation) { - DRM_DEBUG("Rotation not supported\n"); - return -EINVAL; - } - - if (swap->seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE | - _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)) { - DRM_ERROR("Invalid sequence type 0x%x\n", swap->seqtype); - return -EINVAL; - } - - pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0; - - seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE); - - if (!(dev_priv->vblank_pipe & (1 << pipe))) { - DRM_ERROR("Invalid pipe %d\n", pipe); - return -EINVAL; - } - - spin_lock_irqsave(&dev->drw_lock, irqflags); - - if (!drm_get_drawable_info(dev, swap->drawable)) { - spin_unlock_irqrestore(&dev->drw_lock, irqflags); - DRM_DEBUG("Invalid drawable ID %d\n", swap->drawable); - return -EINVAL; - } - - spin_unlock_irqrestore(&dev->drw_lock, irqflags); - - /* - * We take the ref here and put it when the swap actually completes - * in the tasklet. + /* The delayed swap mechanism was fundamentally racy, and has been + * removed. The model was that the client requested a delayed flip/swap + * from the kernel, then waited for vblank before continuing to perform + * rendering. The problem was that the kernel might wake the client + * up before it dispatched the vblank swap (since the lock has to be + * held while touching the ringbuffer), in which case the client would + * clear and start the next frame before the swap occurred, and + * flicker would occur in addition to likely missing the vblank. + * + * In the absence of this ioctl, userland falls back to a correct path + * of waiting for a vblank, then dispatching the swap on its own. + * Context switching to userland and back is plenty fast enough for + * meeting the requirements of vblank swapping. */ - ret = drm_vblank_get(dev, pipe); - if (ret) - return ret; - curseq = drm_vblank_count(dev, pipe); - - if (seqtype == _DRM_VBLANK_RELATIVE) - swap->sequence += curseq; - - if ((curseq - swap->sequence) <= (1<<23)) { - if (swap->seqtype & _DRM_VBLANK_NEXTONMISS) { - swap->sequence = curseq + 1; - } else { - DRM_DEBUG("Missed target sequence\n"); - drm_vblank_put(dev, pipe); - return -EINVAL; - } - } - - vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER); - - if (!vbl_swap) { - DRM_ERROR("Failed to allocate memory to queue swap\n"); - drm_vblank_put(dev, pipe); - return -ENOMEM; - } - - vbl_swap->drw_id = swap->drawable; - vbl_swap->pipe = pipe; - vbl_swap->sequence = swap->sequence; - - spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); - - list_for_each(list, &dev_priv->vbl_swaps.head) { - vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); - - if (vbl_old->drw_id == swap->drawable && - vbl_old->pipe == pipe && - vbl_old->sequence == swap->sequence) { - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - drm_vblank_put(dev, pipe); - drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); - DRM_DEBUG("Already scheduled\n"); - return 0; - } - } - - if (dev_priv->swaps_pending >= 10) { - DRM_DEBUG("Too many swaps queued\n"); - DRM_DEBUG(" pipe 0: %d pipe 1: %d\n", - drm_vblank_count(dev, 0), - drm_vblank_count(dev, 1)); - - list_for_each(list, &dev_priv->vbl_swaps.head) { - vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); - DRM_DEBUG("\tdrw %x pipe %d seq %x\n", - vbl_old->drw_id, vbl_old->pipe, - vbl_old->sequence); - } - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - drm_vblank_put(dev, pipe); - drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); - return -EBUSY; - } - - list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head); - dev_priv->swaps_pending++; - - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - - return 0; + return -EINVAL; } /* drm_dma.h hooks @@ -831,11 +487,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int ret, num_pipes = 2; - spin_lock_init(&dev_priv->swaps_lock); - INIT_LIST_HEAD(&dev_priv->vbl_swaps.head); - INIT_WORK(&dev_priv->vblank_work, i915_vblank_work_handler); - dev_priv->swaps_pending = 0; - /* Set initial unmasked IRQs to just the selected vblank pipes. */ dev_priv->irq_mask_reg = ~0; -- cgit v1.2.3 From 5d8e6bb7a20b6206e1fe44565efc383a941b81fa Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 4 Nov 2008 18:36:29 -0800 Subject: drm: Remove infrastructure for supporting i915's vblank swapping. It's not used in any other drivers, and doesn't look like it will be from drm.git master. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 80 ---------------------------------------------- drivers/gpu/drm/drm_lock.c | 9 ------ drivers/gpu/drm/drm_stub.c | 1 - include/drm/drmP.h | 5 --- 4 files changed, 95 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 212a94f715b2..15c8dabc3e97 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -280,8 +280,6 @@ int drm_irq_uninstall(struct drm_device * dev) drm_vblank_cleanup(dev); - dev->locked_tasklet_func = NULL; - return 0; } EXPORT_SYMBOL(drm_irq_uninstall); @@ -699,81 +697,3 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) drm_vbl_send_signals(dev, crtc); } EXPORT_SYMBOL(drm_handle_vblank); - -/** - * Tasklet wrapper function. - * - * \param data DRM device in disguise. - * - * Attempts to grab the HW lock and calls the driver callback on success. On - * failure, leave the lock marked as contended so the callback can be called - * from drm_unlock(). - */ -static void drm_locked_tasklet_func(unsigned long data) -{ - struct drm_device *dev = (struct drm_device *)data; - unsigned long irqflags; - void (*tasklet_func)(struct drm_device *); - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - tasklet_func = dev->locked_tasklet_func; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - if (!tasklet_func || - !drm_lock_take(&dev->lock, - DRM_KERNEL_CONTEXT)) { - return; - } - - dev->lock.lock_time = jiffies; - atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - tasklet_func = dev->locked_tasklet_func; - dev->locked_tasklet_func = NULL; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - if (tasklet_func != NULL) - tasklet_func(dev); - - drm_lock_free(&dev->lock, - DRM_KERNEL_CONTEXT); -} - -/** - * Schedule a tasklet to call back a driver hook with the HW lock held. - * - * \param dev DRM device. - * \param func Driver callback. - * - * This is intended for triggering actions that require the HW lock from an - * interrupt handler. The lock will be grabbed ASAP after the interrupt handler - * completes. Note that the callback may be called from interrupt or process - * context, it must not make any assumptions about this. Also, the HW lock will - * be held with the kernel context or any client context. - */ -void drm_locked_tasklet(struct drm_device *dev, void (*func)(struct drm_device *)) -{ - unsigned long irqflags; - static DECLARE_TASKLET(drm_tasklet, drm_locked_tasklet_func, 0); - - if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ) || - test_bit(TASKLET_STATE_SCHED, &drm_tasklet.state)) - return; - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - - if (dev->locked_tasklet_func) { - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - return; - } - - dev->locked_tasklet_func = func; - - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - drm_tasklet.data = (unsigned long)dev; - - tasklet_hi_schedule(&drm_tasklet); -} -EXPORT_SYMBOL(drm_locked_tasklet); diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c index 888159e03d26..1cfa72031f8f 100644 --- a/drivers/gpu/drm/drm_lock.c +++ b/drivers/gpu/drm/drm_lock.c @@ -154,8 +154,6 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_lock *lock = data; - unsigned long irqflags; - void (*tasklet_func)(struct drm_device *); if (lock->context == DRM_KERNEL_CONTEXT) { DRM_ERROR("Process %d using kernel context %d\n", @@ -163,13 +161,6 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv) return -EINVAL; } - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - tasklet_func = dev->locked_tasklet_func; - dev->locked_tasklet_func = NULL; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - if (tasklet_func != NULL) - tasklet_func(dev); - atomic_inc(&dev->counts[_DRM_STAT_UNLOCKS]); /* kernel_context_switch isn't used by any of the x86 drm diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index 141e33004a76..66c96ec66672 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -92,7 +92,6 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev, spin_lock_init(&dev->count_lock); spin_lock_init(&dev->drw_lock); - spin_lock_init(&dev->tasklet_lock); spin_lock_init(&dev->lock.spinlock); init_timer(&dev->timer); mutex_init(&dev->struct_mutex); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 59c796b46ee7..28c7f1679d49 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -861,8 +861,6 @@ struct drm_device { struct timer_list vblank_disable_timer; u32 max_vblank_count; /**< size of vblank counter register */ - spinlock_t tasklet_lock; /**< For drm_locked_tasklet */ - void (*locked_tasklet_func)(struct drm_device *dev); /*@} */ cycles_t ctx_start; @@ -1149,8 +1147,6 @@ extern int drm_vblank_init(struct drm_device *dev, int num_crtcs); extern int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *filp); extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq); -extern void drm_locked_tasklet(struct drm_device *dev, - void(*func)(struct drm_device *)); extern u32 drm_vblank_count(struct drm_device *dev, int crtc); extern void drm_handle_vblank(struct drm_device *dev, int crtc); extern int drm_vblank_get(struct drm_device *dev, int crtc); @@ -1158,7 +1154,6 @@ extern void drm_vblank_put(struct drm_device *dev, int crtc); /* Modesetting support */ extern int drm_modeset_ctl(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern void drm_locked_tasklet(struct drm_device *dev, void(*func)(struct drm_device*)); /* AGP/GART support (drm_agpsupport.h) */ extern struct drm_agp_head *drm_agp_init(struct drm_device *dev); -- cgit v1.2.3 From 78538bf14995a136c2d9a22159ada49937359119 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 11 Nov 2008 17:56:16 +1000 Subject: drm/radeon: map registers at load time Now that the radeon driver has suspend/resume functions, it needs to map its registers at load time or it will likely crash if a suspend operation occurs before the driver has been initialized. This patch moves the register mapping code from firstopen to load and makes the mapping into a _DRM_DRIVER one so that the core won't remove it at lastclose time. Fixes (at least partially) kernel bz #11891. Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cp.c | 15 +++++++++------ drivers/gpu/drm/radeon/radeon_drv.h | 2 +- 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 073894824e6b..abdc1ae38467 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -1751,6 +1751,12 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags) else dev_priv->flags |= RADEON_IS_PCI; + ret = drm_addmap(dev, drm_get_resource_start(dev, 2), + drm_get_resource_len(dev, 2), _DRM_REGISTERS, + _DRM_READ_ONLY | _DRM_DRIVER, &dev_priv->mmio); + if (ret != 0) + return ret; + DRM_DEBUG("%s card detected\n", ((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI")))); return ret; @@ -1767,12 +1773,6 @@ int radeon_driver_firstopen(struct drm_device *dev) dev_priv->gart_info.table_size = RADEON_PCIGART_TABLE_SIZE; - ret = drm_addmap(dev, drm_get_resource_start(dev, 2), - drm_get_resource_len(dev, 2), _DRM_REGISTERS, - _DRM_READ_ONLY, &dev_priv->mmio); - if (ret != 0) - return ret; - dev_priv->fb_aper_offset = drm_get_resource_start(dev, 0); ret = drm_addmap(dev, dev_priv->fb_aper_offset, drm_get_resource_len(dev, 0), _DRM_FRAME_BUFFER, @@ -1788,6 +1788,9 @@ int radeon_driver_unload(struct drm_device *dev) drm_radeon_private_t *dev_priv = dev->dev_private; DRM_DEBUG("\n"); + + drm_rmmap(dev, dev_priv->mmio); + drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER); dev->dev_private = NULL; diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 02f5575ba395..7a183789be97 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -287,7 +287,6 @@ typedef struct drm_radeon_private { unsigned long gart_textures_offset; drm_local_map_t *sarea; - drm_local_map_t *mmio; drm_local_map_t *cp_ring; drm_local_map_t *ring_rptr; drm_local_map_t *gart_textures; @@ -318,6 +317,7 @@ typedef struct drm_radeon_private { int num_gb_pipes; int track_flush; + drm_local_map_t *mmio; } drm_radeon_private_t; typedef struct drm_radeon_buf_priv { -- cgit v1.2.3 From bd6b52a17b9af630c38bb4f89609be5654d71e1e Mon Sep 17 00:00:00 2001 From: Qinghuang Feng Date: Sat, 8 Nov 2008 16:32:02 +0800 Subject: [libata] pata_cs553*.c: cleanup kernel-doc No arguments named @deadline in cs5535_cable_detect() and cs5536_cable_detect(). Remove them. Signed-off-by: Qinghuang Feng Signed-off-by: Jeff Garzik --- drivers/ata/pata_cs5535.c | 1 - drivers/ata/pata_cs5536.c | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 1b2d4a0f5f74..8b236af84c2e 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -72,7 +72,6 @@ /** * cs5535_cable_detect - detect cable type * @ap: Port to detect on - * @deadline: deadline jiffies for the operation * * Perform cable detection for ATA66 capable cable. Return a libata * cable type. diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c index 73f8332cb679..afed92976198 100644 --- a/drivers/ata/pata_cs5536.c +++ b/drivers/ata/pata_cs5536.c @@ -110,7 +110,6 @@ static inline int cs5536_write(struct pci_dev *pdev, int reg, int val) /** * cs5536_cable_detect - detect cable type * @ap: Port to detect on - * @deadline: deadline jiffies for the operation * * Perform cable detection for ATA66 capable cable. Return a libata * cable type. -- cgit v1.2.3 From bc170e656881306d65eb1318c98032e1ab305ee8 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Thu, 6 Nov 2008 08:03:23 -0500 Subject: [libata] pata_sch: notice attached slave devices I posted this last month, but was prompted to do so again in bz#467457 Add capability flag to support slave devices with pata_sch driver. Signed-off-by: Mark Salter Signed-off-by: Jeff Garzik --- drivers/ata/pata_sch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c index c8cc027789fe..6aeeeeb34124 100644 --- a/drivers/ata/pata_sch.c +++ b/drivers/ata/pata_sch.c @@ -83,7 +83,7 @@ static struct ata_port_operations sch_pata_ops = { }; static struct ata_port_info sch_port_info = { - .flags = 0, + .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, /* pio0-4 */ .mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */ .udma_mask = ATA_UDMA5, /* udma0-5 */ -- cgit v1.2.3 From a12d6c9a09c644cb4a35be099eb5124d38e4feb8 Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Thu, 6 Nov 2008 11:44:34 +0100 Subject: [libata] pata_pcmcia: another memory card support Support for Apacer photo steno pro card. Signed-off-by: Marc Pignat Signed-off-by: Jeff Garzik --- drivers/ata/pata_pcmcia.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 271cb64d429e..64b2e2281ee7 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -416,6 +416,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506), PCMCIA_DEVICE_NULL, }; -- cgit v1.2.3 From 44901a96847b9967c057832b185e2f34ee6a14e5 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 4 Nov 2008 10:34:48 -0800 Subject: libata: Avoid overflow in ata_tf_read_block() when tf->hba_lbal > 127 Phillip O'Donnell pointed out that the same sign extension bug that was fixed in commit ba14a9c2 ("libata: Avoid overflow in ata_tf_to_lba48() when tf->hba_lbal > 127") also appears to exist in ata_tf_read_block(). Fix this by adding a cast to u64. Signed-off-by: Roland Dreier Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 0cd3ad497136..4214bfb13bbd 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -612,7 +612,7 @@ u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev) if (tf->flags & ATA_TFLAG_LBA48) { block |= (u64)tf->hob_lbah << 40; block |= (u64)tf->hob_lbam << 32; - block |= tf->hob_lbal << 24; + block |= (u64)tf->hob_lbal << 24; } else block |= (tf->device & 0xf) << 24; -- cgit v1.2.3 From 19b723218bde79c60a394a3caee9eb156ac2d356 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 4 Nov 2008 17:08:40 +0900 Subject: libata: fix last_reset timestamp handling ehc->last_reset is used to ensure that resets are not issued too close to each other. It's initialized to jiffies minus one minute on EH entry. However, when new links are initialized after PMP is probed, new links have zero for this timestamp resulting in long wait depending on the current jiffies. This patch makes last_set considered iff ATA_EHI_DID_RESET is set, in which case last_reset is always initialized. As an added precaution, WARN_ON() is added so that warning is printed if last_reset is in future. This problem is spotted and debugged by Shane Huang. Signed-off-by: Tejun Heo Cc: Shane Huang Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 8077bdf5d30d..32da9a93ce44 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -610,9 +610,6 @@ void ata_scsi_error(struct Scsi_Host *host) if (ata_ncq_enabled(dev)) ehc->saved_ncq_enabled |= 1 << devno; } - - /* set last reset timestamp to some time in the past */ - ehc->last_reset = jiffies - 60 * HZ; } ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; @@ -2281,17 +2278,21 @@ int ata_eh_reset(struct ata_link *link, int classify, if (link->flags & ATA_LFLAG_NO_SRST) softreset = NULL; - now = jiffies; - deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN); - if (time_before(now, deadline)) - schedule_timeout_uninterruptible(deadline - now); + /* make sure each reset attemp is at least COOL_DOWN apart */ + if (ehc->i.flags & ATA_EHI_DID_RESET) { + now = jiffies; + WARN_ON(time_after(ehc->last_reset, now)); + deadline = ata_deadline(ehc->last_reset, + ATA_EH_RESET_COOL_DOWN); + if (time_before(now, deadline)) + schedule_timeout_uninterruptible(deadline - now); + } spin_lock_irqsave(ap->lock, flags); ap->pflags |= ATA_PFLAG_RESETTING; spin_unlock_irqrestore(ap->lock, flags); ata_eh_about_to_do(link, NULL, ATA_EH_RESET); - ehc->last_reset = jiffies; ata_link_for_each_dev(dev, link) { /* If we issue an SRST then an ATA drive (not ATAPI) @@ -2379,7 +2380,6 @@ int ata_eh_reset(struct ata_link *link, int classify, /* * Perform reset */ - ehc->last_reset = jiffies; if (ata_is_host_link(link)) ata_eh_freeze_port(ap); @@ -2391,6 +2391,7 @@ int ata_eh_reset(struct ata_link *link, int classify, reset == softreset ? "soft" : "hard"); /* mark that this EH session started with reset */ + ehc->last_reset = jiffies; if (reset == hardreset) ehc->i.flags |= ATA_EHI_DID_HARDRESET; else @@ -2535,7 +2536,7 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_done(link, NULL, ATA_EH_RESET); if (slave) ata_eh_done(slave, NULL, ATA_EH_RESET); - ehc->last_reset = jiffies; + ehc->last_reset = jiffies; /* update to completion time */ ehc->i.action |= ATA_EH_REVALIDATE; rc = 0; -- cgit v1.2.3 From afa21e0584f78964c092981fad94e45d38cda249 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 11 Nov 2008 18:02:12 +1000 Subject: drm/i915: Filter pci devices based on PCI_CLASS_DISPLAY_VGA This fixes hangs on 855-class hardware by avoiding double attachment of the driver due to the stub second head device having the same pci id as the real device. Other DRM drivers probably want this treatment as well, but I'm applying it just to this one for safety. But we should clean up the drm_pciids.h mess now so that each driver has its own pci id list header in its own directory. Lets do that in the next release. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_drv.c | 10 +++++++++- include/drm/drm_pciids.h | 46 +++++++++++++++++++++++----------------------- 2 files changed, 32 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 96f416afc3f6..3ab1e9cc4692 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -266,11 +266,19 @@ int drm_init(struct drm_driver *driver) for (i = 0; driver->pci_driver.id_table[i].vendor != 0; i++) { pid = (struct pci_device_id *)&driver->pci_driver.id_table[i]; + /* Loop around setting up a DRM device for each PCI device + * matching our ID and device class. If we had the internal + * function that pci_get_subsys and pci_get_class used, we'd + * be able to just pass pid in instead of doing a two-stage + * thing. + */ pdev = NULL; - /* pass back in pdev to account for multiple identical cards */ while ((pdev = pci_get_subsys(pid->vendor, pid->device, pid->subvendor, pid->subdevice, pdev)) != NULL) { + if ((pdev->class & pid->class_mask) != pid->class) + continue; + /* stealth mode requires a manual probe */ pci_dev_get(pdev); drm_get_dev(pdev, pid, driver); diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index da04109741e8..5165f240aa68 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -395,27 +395,27 @@ {0, 0, 0} #define i915_PCI_IDS \ - {0x8086, 0x3577, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x258a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x27a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x27ae, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2972, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2982, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2992, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x29a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x29b2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x29c2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x29d2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x3577, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x258a, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x27a2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x27ae, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2972, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2982, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2992, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x29a2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x29b2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x29c2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x29d2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0, 0, 0} -- cgit v1.2.3 From 0baf823a10bd4131f70e9712d1f02de3c247f1df Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 8 Nov 2008 11:44:14 +1000 Subject: drm/i915: Move legacy breadcrumb out of the reserved status page area Addresses in the hardware status page below index 0x20 are reserved for use by the hardware. The legacy breadcrumb was sitting at index 5. Move it to index 0x21, and make sure everyone uses the defined value instead of hard-coded constants. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 10 ++++------ drivers/gpu/drm/i915/i915_drv.h | 3 ++- drivers/gpu/drm/i915/i915_irq.c | 6 ++---- 3 files changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 9d4278be0ca0..0d215e38606a 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -445,7 +445,7 @@ static void i915_emit_breadcrumb(struct drm_device *dev) BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); - OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); OUT_RING(0); ADVANCE_LP_RING(); @@ -576,7 +576,7 @@ static int i915_dispatch_flip(struct drm_device * dev) BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); - OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); OUT_RING(0); ADVANCE_LP_RING(); @@ -611,7 +611,6 @@ static int i915_batchbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 *hw_status = dev_priv->hw_status_page; drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *) dev_priv->sarea_priv; drm_i915_batchbuffer_t *batch = data; @@ -637,7 +636,7 @@ static int i915_batchbuffer(struct drm_device *dev, void *data, mutex_unlock(&dev->struct_mutex); if (sarea_priv) - sarea_priv->last_dispatch = (int)hw_status[5]; + sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); return ret; } @@ -645,7 +644,6 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 *hw_status = dev_priv->hw_status_page; drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *) dev_priv->sarea_priv; drm_i915_cmdbuffer_t *cmdbuf = data; @@ -673,7 +671,7 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, } if (sarea_priv) - sarea_priv->last_dispatch = (int)hw_status[5]; + sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); return 0; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 4afbadb13316..ef1c0b8f8d07 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -608,8 +608,9 @@ static inline void opregion_enable_asle(struct drm_device *dev) { return; } * The area from dword 0x20 to 0x3ff is available for driver usage. */ #define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) -#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, 5) +#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX) #define I915_GEM_HWS_INDEX 0x20 +#define I915_BREADCRUMB_INDEX 0x21 extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index a75345af62ef..82752d6177a4 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -212,12 +212,10 @@ static int i915_emit_irq(struct drm_device * dev) if (dev_priv->sarea_priv) dev_priv->sarea_priv->last_enqueue = dev_priv->counter; - BEGIN_LP_RING(6); + BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); - OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); - OUT_RING(0); - OUT_RING(0); OUT_RING(MI_USER_INTERRUPT); ADVANCE_LP_RING(); -- cgit v1.2.3 From 77eb50aefa5dd2337246dce8b66e18e837c1a8bc Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Thu, 6 Nov 2008 00:49:00 +0000 Subject: powerpc: Fix msr check in compat_sys_swapcontext The new context may not be 16-byte aligned, so the real address of the mcontext structure should be read from the uc_regs pointer instead of directly using the (unaligned) uc_mcontext field. Signed-off-by: Andreas Schwab Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/signal_32.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index a6a43103655e..b13abf305996 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -941,9 +941,21 @@ long sys_swapcontext(struct ucontext __user *old_ctx, #ifdef CONFIG_PPC64 unsigned long new_msr = 0; - if (new_ctx && - get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR])) - return -EFAULT; + if (new_ctx) { + struct mcontext __user *mcp; + u32 cmcp; + + /* + * Get pointer to the real mcontext. No need for + * access_ok since we are dealing with compat + * pointers. + */ + if (__get_user(cmcp, &new_ctx->uc_regs)) + return -EFAULT; + mcp = (struct mcontext __user *)(u64)cmcp; + if (__get_user(new_msr, &mcp->mc_gregs[PT_MSR])) + return -EFAULT; + } /* * Check that the context is not smaller than the original * size (with VMX but without VSX) -- cgit v1.2.3 From cb8fdc69a2a80e81e1280ec58afd2c3217ac8a7f Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 11 Nov 2008 19:39:26 +1100 Subject: powerpc: Update desktop/server defconfigs Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras --- arch/powerpc/configs/chrp32_defconfig | 159 ++++++++++++++---- arch/powerpc/configs/g5_defconfig | 142 ++++++++++++---- arch/powerpc/configs/iseries_defconfig | 114 +++++++++---- arch/powerpc/configs/maple_defconfig | 142 ++++++++++++---- arch/powerpc/configs/pmac32_defconfig | 160 ++++++++++++++---- arch/powerpc/configs/ppc64_defconfig | 174 +++++++++++++++----- arch/powerpc/configs/ppc6xx_defconfig | 286 ++++++++++++++++++++++++--------- arch/powerpc/configs/pseries_defconfig | 169 ++++++++++++++----- 8 files changed, 1033 insertions(+), 313 deletions(-) diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index 2e0ef8c18227..63b3c2372ce8 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:12:40 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:35:37 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -108,7 +108,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +124,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -159,6 +158,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -212,6 +212,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -227,15 +229,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -310,7 +312,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -334,10 +335,12 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_IPTABLES=m @@ -361,6 +364,7 @@ CONFIG_NF_NAT_SIP=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -381,14 +385,8 @@ CONFIG_NF_NAT_SIP=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,19 +441,18 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -616,7 +613,23 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -641,6 +654,9 @@ CONFIG_DE4X5=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set @@ -669,6 +685,7 @@ CONFIG_8139TOO=y CONFIG_VIA_RHINE=y # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -690,18 +707,22 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -777,6 +798,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -795,6 +817,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=y # @@ -953,6 +976,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -980,6 +1014,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1028,6 +1063,7 @@ CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set CONFIG_FB_3DFX=y @@ -1040,6 +1076,7 @@ CONFIG_FB_3DFX=y # CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -1083,9 +1120,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1102,6 +1166,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1121,6 +1187,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1128,6 +1196,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1149,7 +1218,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1170,6 +1238,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1187,7 +1256,9 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1197,6 +1268,7 @@ CONFIG_USB_STORAGE=m # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1208,12 +1280,18 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1248,6 +1326,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1349,9 +1428,8 @@ CONFIG_NLS_ISO8859_1=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1404,15 +1482,23 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1421,6 +1507,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y @@ -1435,14 +1522,19 @@ CONFIG_IRQSTACKS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1515,6 +1607,11 @@ CONFIG_CRYPTO_ARC4=m # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index cfa5d053ee5e..f85e71ccb989 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:15:06 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:36:30 2008 # CONFIG_PPC64=y @@ -21,7 +21,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -112,7 +112,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -129,8 +131,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -163,6 +163,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -233,6 +235,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y @@ -242,7 +246,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y -# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -255,14 +258,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 @@ -292,6 +296,7 @@ CONFIG_PCI_MSI=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 @@ -336,7 +341,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -367,10 +371,12 @@ CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m @@ -381,6 +387,7 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=y @@ -402,11 +409,10 @@ CONFIG_LLC=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -463,19 +469,18 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -658,6 +663,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -744,14 +750,17 @@ CONFIG_SUNGEM=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -768,18 +777,22 @@ CONFIG_TIGON3=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set CONFIG_TR=y CONFIG_IBMOL=y @@ -804,6 +817,7 @@ CONFIG_USB_USBNET=m # CONFIG_USB_NET_AX8817X is not set CONFIG_USB_NET_CDCETHER=m # CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_PLUSB is not set @@ -1015,6 +1029,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1044,6 +1069,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1085,6 +1111,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1096,6 +1123,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -1124,6 +1152,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1234,15 +1263,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -CONFIG_HID_FF=y CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y CONFIG_LOGITECH_FF=y # CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y CONFIG_THRUSTMASTER_FF=y # CONFIG_ZEROPLUS_FF is not set -CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1259,6 +1309,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1281,6 +1333,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1288,6 +1342,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1309,7 +1364,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1385,6 +1439,7 @@ CONFIG_USB_SERIAL_OMNINET=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1402,7 +1457,9 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1412,6 +1469,7 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1421,14 +1479,20 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1438,6 +1502,7 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set CONFIG_XFS_POSIX_ACL=y @@ -1478,6 +1543,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1521,6 +1587,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1601,9 +1668,8 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1657,19 +1723,26 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1678,6 +1751,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set @@ -1689,16 +1763,19 @@ CONFIG_BOOTX_TEXT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -1772,6 +1849,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 2c3f13577f4b..f925c555508e 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:15:49 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:36:38 2008 # CONFIG_PPC64=y @@ -21,7 +21,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=32 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -111,7 +111,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -127,8 +129,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -161,6 +161,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -219,6 +220,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_IOMMU_VMERGE=y CONFIG_IOMMU_HELPER=y @@ -226,7 +229,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -239,14 +241,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 @@ -275,6 +278,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 @@ -319,7 +323,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -349,15 +352,17 @@ CONFIG_NF_CONNTRACK_IRC=m # CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m @@ -369,40 +374,44 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set CONFIG_NETFILTER_XT_MATCH_DSCP=m # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_OWNER=m # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m +# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set # CONFIG_NETFILTER_XT_MATCH_STATE is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -410,8 +419,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m @@ -421,9 +430,9 @@ CONFIG_NF_NAT_TFTP=m # CONFIG_NF_NAT_H323 is not set # CONFIG_NF_NAT_SIP is not set CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -438,6 +447,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=y @@ -460,14 +470,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -597,6 +601,7 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -647,6 +652,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set @@ -667,12 +675,12 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -689,18 +697,22 @@ CONFIG_E1000=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set CONFIG_TR=y CONFIG_IBMOL=y @@ -837,6 +849,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -877,6 +897,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -886,6 +907,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -895,14 +917,20 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -916,6 +944,7 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set CONFIG_XFS_POSIX_ACL=y @@ -958,6 +987,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y @@ -1001,6 +1031,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1067,9 +1098,8 @@ CONFIG_DLM=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1127,19 +1157,26 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1148,6 +1185,7 @@ CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set @@ -1159,16 +1197,19 @@ CONFIG_IRQSTACKS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -1242,6 +1283,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 1a3b6423222b..045f1b008ce5 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:18:58 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:36:45 2008 # CONFIG_PPC64=y @@ -20,7 +20,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -107,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -125,8 +127,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -159,6 +159,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -213,6 +215,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y @@ -221,7 +225,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y -# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -234,14 +237,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 @@ -265,11 +269,12 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 @@ -323,6 +328,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -344,14 +350,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -402,19 +402,18 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -644,6 +643,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y @@ -664,11 +666,11 @@ CONFIG_AMD8111_ETH=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -685,18 +687,22 @@ CONFIG_TIGON3=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -895,6 +901,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -942,9 +959,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -961,6 +1005,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -980,6 +1026,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -987,6 +1035,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1070,6 +1119,7 @@ CONFIG_USB_SERIAL_TI=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1087,7 +1137,9 @@ CONFIG_USB_SERIAL_TI=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1097,6 +1149,7 @@ CONFIG_USB_SERIAL_TI=m # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1104,15 +1157,23 @@ CONFIG_USB_SERIAL_TI=m CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -1146,6 +1207,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1185,6 +1247,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1260,9 +1323,8 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1315,21 +1377,28 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y # CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1338,6 +1407,7 @@ CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y @@ -1352,14 +1422,19 @@ CONFIG_BOOTX_TEXT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1432,6 +1507,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 80481f270133..de9b121820a6 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:20:26 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:36:51 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -125,10 +127,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -161,6 +159,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # Platform support @@ -232,6 +231,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -246,15 +247,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -362,7 +363,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -392,13 +392,14 @@ CONFIG_NF_CONNTRACK_IRC=m # CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -412,19 +413,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m # CONFIG_NETFILTER_XT_MATCH_STATE is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set @@ -432,20 +436,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -453,8 +457,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_PROTO_DCCP=m CONFIG_NF_NAT_FTP=m @@ -465,9 +469,9 @@ CONFIG_NF_NAT_TFTP=m # CONFIG_NF_NAT_H323 is not set # CONFIG_NF_NAT_SIP is not set CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -494,6 +498,7 @@ CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -585,12 +590,11 @@ CONFIG_BT_HCIBFUSB=m # CONFIG_BT_HCIBTUART is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y CONFIG_CFG80211=m CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=m @@ -599,7 +603,9 @@ CONFIG_MAC80211=m # Rate control algorithm selection # CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y @@ -663,7 +669,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives @@ -671,14 +676,14 @@ CONFIG_BLK_DEV_IDE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECS=m # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=y CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -899,6 +904,9 @@ CONFIG_SUNGEM=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set @@ -919,6 +927,7 @@ CONFIG_PCNET32=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -940,18 +949,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -964,6 +977,7 @@ CONFIG_WLAN_80211=y # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set CONFIG_HERMES=m CONFIG_APPLE_AIRPORT=m @@ -1023,6 +1037,7 @@ CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m # CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set CONFIG_USB_NET_NET1080=m # CONFIG_USB_NET_PLUSB is not set @@ -1239,6 +1254,7 @@ CONFIG_POWER_SUPPLY=y CONFIG_APM_POWER=y # CONFIG_BATTERY_DS2760 is not set CONFIG_BATTERY_PMU=y +# CONFIG_BATTERY_BQ27x00 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -1266,6 +1282,17 @@ CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1301,6 +1328,7 @@ CONFIG_VGASTATE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1357,6 +1385,7 @@ CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set CONFIG_FB_3DFX=y @@ -1369,6 +1398,7 @@ CONFIG_FB_3DFX=y # CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -1401,6 +1431,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1514,9 +1545,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT_POWERBOOK=y -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1534,6 +1592,8 @@ CONFIG_USB_DYNAMIC_MINORS=y # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1553,6 +1613,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1560,6 +1622,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1581,7 +1644,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1656,6 +1718,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1673,7 +1736,9 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -1692,6 +1757,7 @@ CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_IDE_DISK=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set @@ -1699,6 +1765,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1710,12 +1777,18 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -1752,6 +1825,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1794,6 +1868,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1870,7 +1945,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1927,18 +2001,25 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1946,6 +2027,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y @@ -1960,16 +2042,19 @@ CONFIG_BOOTX_TEXT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -2043,6 +2128,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index fc5930caeb5f..069ae1bbac29 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:22:03 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:36:56 2008 # CONFIG_PPC64=y @@ -22,7 +22,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=32 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -87,6 +87,7 @@ CONFIG_LOG_BUF_SHIFT=17 CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set CONFIG_CPUSETS=y # CONFIG_GROUP_SCHED is not set @@ -124,12 +125,15 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -141,8 +145,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -175,6 +177,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -294,6 +298,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y @@ -303,7 +309,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y -# CONFIG_CRASH_DUMP is not set # CONFIG_PHYP_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set @@ -318,7 +323,6 @@ CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y @@ -329,8 +333,10 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y # CONFIG_PPC_64K_PAGES is not set @@ -379,6 +385,7 @@ CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 @@ -426,7 +433,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -457,15 +463,17 @@ CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m @@ -477,40 +485,44 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_NETFILTER_XT_MATCH_TIME is not set CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -518,8 +530,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_SCTP=m @@ -531,9 +543,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -543,6 +555,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=y @@ -565,11 +578,10 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -624,21 +636,20 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -835,6 +846,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -926,6 +938,9 @@ CONFIG_IBM_NEW_EMAC_ZMII=y CONFIG_IBM_NEW_EMAC_RGMII=y CONFIG_IBM_NEW_EMAC_TAH=y CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set @@ -946,12 +961,12 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -969,10 +984,12 @@ CONFIG_SPIDER_NET=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set CONFIG_EHEA=m +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set CONFIG_IXGB=m # CONFIG_S2IO is not set @@ -980,9 +997,11 @@ CONFIG_IXGB=m # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set CONFIG_PASEMI_MAC=y +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set CONFIG_TR=y CONFIG_IBMOL=y @@ -1065,6 +1084,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -1080,6 +1100,7 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set # @@ -1255,6 +1276,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1282,6 +1314,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1326,6 +1359,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1337,6 +1371,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_CARMINE is not set CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_ILI9320 is not set @@ -1370,6 +1405,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1481,9 +1517,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1500,6 +1563,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1520,6 +1585,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1527,6 +1594,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1548,7 +1616,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1569,6 +1636,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1586,7 +1654,9 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1656,12 +1726,15 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1670,6 +1743,7 @@ CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PPC=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1679,14 +1753,20 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1700,6 +1780,7 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set CONFIG_XFS_POSIX_ACL=y @@ -1740,6 +1821,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1785,6 +1867,7 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1866,9 +1949,8 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1929,22 +2011,31 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y CONFIG_TRACING=y -# CONFIG_FTRACE is not set + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set CONFIG_IRQSOFF_TRACER=y CONFIG_SCHED_TRACER=y CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set # CONFIG_FTRACE_STARTUP_TEST is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1954,6 +2045,7 @@ CONFIG_DEBUG_STACK_USAGE=y # CONFIG_HCALL_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_XMON_DISASSEMBLY=y @@ -1968,6 +2060,7 @@ CONFIG_BOOTX_TEXT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y @@ -1978,10 +2071,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -2055,6 +2150,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 3c6dbdef56eb..01f05ec5abf3 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:29:50 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:37:01 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -89,6 +89,7 @@ CONFIG_LOG_BUF_SHIFT=17 CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_FREEZER is not set CONFIG_CGROUP_DEVICE=y CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y @@ -128,12 +129,15 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y @@ -144,10 +148,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -180,6 +181,8 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -202,6 +205,7 @@ CONFIG_PPC_82xx=y CONFIG_MPC8272_ADS=y CONFIG_PQ2FADS=y CONFIG_EP8248E=y +CONFIG_MGCOGE=y CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_8272=y @@ -226,6 +230,7 @@ CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y CONFIG_SBC8641D=y CONFIG_MPC8610_HPCD=y +CONFIG_GEF_SBC610=y CONFIG_MPC8641=y CONFIG_MPC8610=y # CONFIG_EMBEDDED6xx is not set @@ -268,6 +273,7 @@ CONFIG_TAU=y # CONFIG_TAU_INT is not set CONFIG_TAU_AVERAGE=y CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y CONFIG_CPM2=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y @@ -275,6 +281,7 @@ CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=m CONFIG_PPC_BESTCOMM_FEC=m CONFIG_PPC_BESTCOMM_GEN_BD=m +CONFIG_MPC8xxx_GPIO=y # # Kernel options @@ -294,6 +301,8 @@ CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -309,15 +318,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -359,7 +368,7 @@ CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set @@ -466,7 +475,6 @@ CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -521,18 +529,20 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m @@ -543,41 +553,45 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -585,8 +599,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_DCCP=m CONFIG_NF_NAT_PROTO_GRE=m @@ -600,9 +614,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m @@ -615,16 +629,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -635,10 +649,6 @@ CONFIG_IP6_NF_SECURITY=m # DECnet: Netfilter Configuration # # CONFIG_DECNET_NF_GRABULATOR is not set - -# -# Bridge: Netfilter Configuration -# CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -698,6 +708,7 @@ CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set CONFIG_DECNET=m @@ -727,6 +738,7 @@ CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -767,6 +779,7 @@ CONFIG_NET_ACT_IPT=m CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y @@ -853,13 +866,12 @@ CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y CONFIG_CFG80211=m CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=m @@ -868,7 +880,9 @@ CONFIG_MAC80211=m # Rate control algorithm selection # CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y @@ -917,7 +931,7 @@ CONFIG_PARPORT_SERIAL=m CONFIG_PARPORT_1284=y CONFIG_PARPORT_NOT_PC=y CONFIG_PNP=y -# CONFIG_PNP_DEBUG is not set +CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols @@ -958,22 +972,20 @@ CONFIG_ENCLOSURE_SERVICES=m # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y -CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -1201,6 +1213,7 @@ CONFIG_PATA_OF_PLATFORM=m CONFIG_PATA_SCH=m CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m @@ -1332,6 +1345,9 @@ CONFIG_NE2000=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m @@ -1370,13 +1386,13 @@ CONFIG_DE600=m CONFIG_DE620=m CONFIG_FEC_MPC52xx=m CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set CONFIG_E1000E=m CONFIG_IP1000=m CONFIG_IGB=m @@ -1400,19 +1416,23 @@ CONFIG_MV643XX_ETH=m CONFIG_QLA3XXX=m CONFIG_ATL1=m # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3=m +# CONFIG_ENIC is not set CONFIG_IXGBE=m CONFIG_IXGB=m CONFIG_S2IO=m CONFIG_MYRI10GE=m CONFIG_NETXEN_NIC=m CONFIG_NIU=m +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set CONFIG_TEHUTI=m CONFIG_BNX2X=m +CONFIG_QLGE=m CONFIG_SFC=m # CONFIG_TR is not set @@ -1434,6 +1454,7 @@ CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_PLUSB=m @@ -1546,6 +1567,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m @@ -1598,6 +1620,7 @@ CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m # @@ -1787,6 +1810,7 @@ CONFIG_SENSORS_PCF8591=m # CONFIG_TPS65010 is not set CONFIG_SENSORS_MAX6875=m CONFIG_SENSORS_TSL2550=m +CONFIG_MCU_MPC8349EMITX=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -1837,6 +1861,7 @@ CONFIG_POWER_SUPPLY=m CONFIG_APM_POWER=m # CONFIG_BATTERY_DS2760 is not set CONFIG_BATTERY_PMU=m +# CONFIG_BATTERY_BQ27x00 is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m # CONFIG_SENSORS_AD7414 is not set @@ -1946,8 +1971,21 @@ CONFIG_SSB_DRIVER_PCICORE=y # # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=m +CONFIG_MFD_SM501_GPIO=y # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1999,6 +2037,7 @@ CONFIG_VIDEO_TVEEPROM=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set CONFIG_VIDEO_IR_I2C=m @@ -2079,14 +2118,12 @@ CONFIG_VIDEO_CPIA_USB=m CONFIG_VIDEO_CPIA2=m CONFIG_VIDEO_SAA5246A=m CONFIG_VIDEO_SAA5249=m -CONFIG_TUNER_3036=m # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_DVB=m CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DPC=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_HEXIUM_GEMINI=m CONFIG_VIDEO_CX88=m @@ -2100,10 +2137,40 @@ CONFIG_VIDEO_IVTV=m CONFIG_VIDEO_FB_IVTV=m CONFIG_VIDEO_CX18=m # CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_MT9M001=m +# CONFIG_MT9M001_PCA9536_SWITCH is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +CONFIG_SOC_CAMERA_MT9V022=m +# CONFIG_MT9V022_PCA9536_SWITCH is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y @@ -2130,13 +2197,6 @@ CONFIG_USB_PWC=m CONFIG_USB_ZR364XX=m CONFIG_USB_STKWEBCAM=m # CONFIG_USB_S2255 is not set -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_MT9M001=m -# CONFIG_MT9M001_PCA9536_SWITCH is not set -CONFIG_SOC_CAMERA_MT9V022=m -# CONFIG_MT9V022_PCA9536_SWITCH is not set -# CONFIG_SOC_CAMERA_PLATFORM is not set -# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set @@ -2154,6 +2214,7 @@ CONFIG_RADIO_MAESTRO=m # CONFIG_RADIO_ZOLTRIX is not set CONFIG_USB_DSBR=m CONFIG_USB_SI470X=m +CONFIG_USB_MR800=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -2194,16 +2255,12 @@ CONFIG_DVB_USB_OPERA1=m CONFIG_DVB_USB_AF9005=m CONFIG_DVB_USB_AF9005_REMOTE=m # CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set # CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m -CONFIG_DVB_CINERGYT2=m -CONFIG_DVB_CINERGYT2_TUNING=y -CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32 -CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512 -CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250 -CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y -CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100 # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -2224,6 +2281,11 @@ CONFIG_DVB_BT8XX=m # CONFIG_DVB_PLUTO2=m +# +# Supported SDMC DM1105 Adapters +# +CONFIG_DVB_DM1105=m + # # Supported DVB Frontends # @@ -2240,6 +2302,8 @@ CONFIG_DVB_CX24110=m CONFIG_DVB_CX24123=m CONFIG_DVB_MT312=m CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m CONFIG_DVB_STV0299=m CONFIG_DVB_TDA8083=m CONFIG_DVB_TDA10086=m @@ -2247,6 +2311,8 @@ CONFIG_DVB_VES1X93=m CONFIG_DVB_TUNER_ITD1000=m CONFIG_DVB_TDA826X=m CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_SI21XX=m # # DVB-T (terrestrial) frontends @@ -2299,6 +2365,13 @@ CONFIG_DVB_TUNER_DIB0070=m CONFIG_DVB_LNBP21=m CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m +CONFIG_DVB_LGS8GL5=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y CONFIG_USB_DABUSB=m @@ -2320,6 +2393,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -2382,6 +2456,7 @@ CONFIG_FB_SAVAGE=m CONFIG_FB_SAVAGE_I2C=y CONFIG_FB_SAVAGE_ACCEL=y # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set CONFIG_FB_NEOMAGIC=m CONFIG_FB_KYRO=m CONFIG_FB_3DFX=m @@ -2397,6 +2472,7 @@ CONFIG_FB_TRIDENT_ACCEL=y CONFIG_FB_SM501=m CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -2432,6 +2508,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -2594,15 +2671,36 @@ CONFIG_HIDRAW=y # USB Input Devices # CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT_POWERBOOK=y -CONFIG_HID_FF=y CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y CONFIG_LOGITECH_FF=y CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y CONFIG_THRUSTMASTER_FF=y CONFIG_ZEROPLUS_FF=y -CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -2620,6 +2718,8 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -2647,6 +2747,8 @@ CONFIG_USB_U132_HCD=m CONFIG_USB_SL811_HCD=m # CONFIG_USB_SL811_CS is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set # @@ -2655,6 +2757,7 @@ CONFIG_USB_SL811_HCD=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -2676,7 +2779,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y -# CONFIG_USB_STORAGE_SIERRA is not set CONFIG_USB_STORAGE_CYPRESS_ATACB=y # CONFIG_USB_LIBUSUAL is not set @@ -2741,6 +2843,7 @@ CONFIG_USB_SERIAL_DEBUG=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m @@ -2762,12 +2865,14 @@ CONFIG_USB_TRANCEVIBRATOR=m CONFIG_USB_IOWARRIOR=m # CONFIG_USB_TEST is not set CONFIG_USB_ISIGHTFW=m +CONFIG_USB_VST=m CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m CONFIG_USB_CXACRU=m CONFIG_USB_UEAGLEATM=m CONFIG_USB_XUSBATM=m # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -2787,6 +2892,7 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m CONFIG_ACCESSIBILITY=y CONFIG_A11Y_BRAILLE_CONSOLE=y @@ -2837,12 +2943,15 @@ CONFIG_RTC_DRV_FM3130=m # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set CONFIG_RTC_DRV_DS1511=m CONFIG_RTC_DRV_DS1553=m CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_STK17TA8=m # CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_M48T35=m CONFIG_RTC_DRV_M48T59=m +# CONFIG_RTC_DRV_BQ4802 is not set CONFIG_RTC_DRV_V3020=m # @@ -2862,7 +2971,10 @@ CONFIG_KS0108_DELAY=2 CONFIG_UIO=m CONFIG_UIO_CIF=m CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m CONFIG_UIO_SMX=m +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set # # File systems @@ -2872,20 +2984,21 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4DEV_FS=m -CONFIG_EXT4DEV_FS_XATTR=y -CONFIG_EXT4DEV_FS_POSIX_ACL=y -CONFIG_EXT4DEV_FS_SECURITY=y +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_FS_XIP=y CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set -CONFIG_JBD2=m +CONFIG_JBD2=y CONFIG_JBD2_DEBUG=y -CONFIG_FS_MBCACHE=m +CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y @@ -2898,6 +3011,7 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y @@ -2911,6 +3025,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m CONFIG_OCFS2_FS_STATS=y # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -2950,6 +3065,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y @@ -2996,17 +3112,18 @@ CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set CONFIG_CIFS_EXPERIMENTAL=y -CONFIG_CIFS_UPCALL=y CONFIG_CIFS_DFS_UPCALL=y CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y @@ -3084,15 +3201,13 @@ CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y -CONFIG_QE_GPIO=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -3157,28 +3272,38 @@ CONFIG_DEBUG_SG=y CONFIG_FRAME_POINTER=y CONFIG_BOOT_PRINTK_DELAY=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set CONFIG_FAULT_INJECTION=y CONFIG_FAILSLAB=y CONFIG_FAIL_PAGE_ALLOC=y CONFIG_FAIL_MAKE_REQUEST=y +CONFIG_FAIL_IO_TIMEOUT=y CONFIG_FAULT_INJECTION_DEBUG_FS=y CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y CONFIG_TRACING=y -CONFIG_FTRACE=y + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y CONFIG_SCHED_TRACER=y CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_DYNAMIC_FTRACE=y +# CONFIG_BOOT_TRACER is not set +CONFIG_STACK_TRACER=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set # CONFIG_BUILD_DOCSRC is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -3186,6 +3311,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_XMON_DISASSEMBLY=y @@ -3202,6 +3328,7 @@ CONFIG_BOOTX_TEXT=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_FILE_CAPABILITIES=y @@ -3226,10 +3353,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -3303,6 +3432,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_HIFN_795X=m CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index e77c5e7a0be2..1e520ab65118 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:31:07 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:37:06 2008 # CONFIG_PPC64=y @@ -22,7 +22,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=128 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -86,6 +86,7 @@ CONFIG_LOG_BUF_SHIFT=17 CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y +CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y # CONFIG_GROUP_SCHED is not set @@ -123,12 +124,15 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -141,8 +145,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -175,6 +177,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -237,6 +241,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y @@ -246,7 +252,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y -# CONFIG_CRASH_DUMP is not set # CONFIG_PHYP_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_NUMA=y @@ -262,7 +267,6 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y @@ -271,8 +275,10 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set @@ -307,6 +313,7 @@ CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 @@ -351,7 +358,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -383,9 +389,10 @@ CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m @@ -396,19 +403,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -416,20 +426,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -437,8 +447,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_UDPLITE=m CONFIG_NF_NAT_FTP=m @@ -456,6 +466,7 @@ CONFIG_NF_NAT_TFTP=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=y @@ -479,14 +490,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -546,19 +551,18 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -696,6 +700,7 @@ CONFIG_SATA_PMP=y # CONFIG_ATA_SFF is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -765,6 +770,9 @@ CONFIG_IBMVETH=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set @@ -786,12 +794,12 @@ CONFIG_E100=y # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -808,19 +816,23 @@ CONFIG_TIGON3=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set CONFIG_EHEA=y +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set CONFIG_IXGB=m CONFIG_S2IO=m # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set CONFIG_TR=y CONFIG_IBMOL=y @@ -902,6 +914,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -917,6 +930,7 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set # @@ -1076,6 +1090,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1103,6 +1128,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1146,6 +1172,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1157,6 +1184,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_CARMINE is not set CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -1198,9 +1226,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1217,6 +1272,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1236,6 +1293,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1243,6 +1302,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1264,7 +1324,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1286,6 +1345,7 @@ CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1303,7 +1363,9 @@ CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1331,6 +1393,7 @@ CONFIG_INFINIBAND_SRP=m # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1340,14 +1403,20 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1361,6 +1430,7 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set CONFIG_XFS_POSIX_ACL=y @@ -1372,6 +1442,7 @@ CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1405,6 +1476,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1449,6 +1521,7 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1514,9 +1587,8 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1580,21 +1652,31 @@ CONFIG_DEBUG_MEMORY_INIT=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y CONFIG_TRACING=y -# CONFIG_FTRACE is not set + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y CONFIG_IRQSOFF_TRACER=y CONFIG_SCHED_TRACER=y CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_BOOT_TRACER is not set +CONFIG_STACK_TRACER=y # CONFIG_FTRACE_STARTUP_TEST is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1604,6 +1686,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_HCALL_STATS=y # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y @@ -1618,16 +1701,19 @@ CONFIG_VIRQ_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1701,6 +1787,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3 From 8c2f5fa51e1b22db53acf4f3918b6f590b4a35a1 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Mon, 10 Nov 2008 13:58:41 +0100 Subject: myri10ge: fix stop/go ordering even more The doorbell writes may be seen out of order by the firmware if they are in WC memory since the tx spin(un)lock does not flush WC writes. Hence if the "stop" is written on a different CPU than the "go", it is possible that the stop will arrive after the go unless we add an explicit memory barrier (and mmiowb() is not enough). It fixes transmit hangs in multi tx queue mode. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index a5f428bcc0eb..b37867097308 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.3-1.375" +#define MYRI10GE_VERSION_STR "1.4.3-1.378" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index) if (tx->req == tx->done) { tx->queue_active = 0; put_be32(htonl(1), tx->send_stop); + mb(); mmiowb(); } __netif_tx_unlock(dev_queue); @@ -2865,6 +2866,7 @@ again: if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) { tx->queue_active = 1; put_be32(htonl(1), tx->send_go); + mb(); mmiowb(); } tx->pkt_start++; -- cgit v1.2.3 From 9f64306b8a3949b74cb11d3b2f613e8a2af20fa6 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Sun, 9 Nov 2008 00:55:28 -0800 Subject: cxgb3 - eeprom read fixes Protect against invalid phy entries in the eeprom. Extend eeprom access timeout. Signed-off-by: Divy Le Ray Signed-off-by: Jeff Garzik --- drivers/net/cxgb3/t3_hw.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 968f64be3743..9a0898b0dbce 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -572,7 +572,7 @@ struct t3_vpd { u32 pad; /* for multiple-of-4 sizing and alignment */ }; -#define EEPROM_MAX_POLL 4 +#define EEPROM_MAX_POLL 40 #define EEPROM_STAT_ADDR 0x4000 #define VPD_BASE 0xc00 @@ -3690,6 +3690,12 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, ; pti = &port_types[adapter->params.vpd.port_type[j]]; + if (!pti->phy_prep) { + CH_ALERT(adapter, "Invalid port type index %d\n", + adapter->params.vpd.port_type[j]); + return -EINVAL; + } + ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j, ai->mdio_ops); if (ret) -- cgit v1.2.3 From f9ee3882969224aa9f086268020c31819be6ae99 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Sun, 9 Nov 2008 00:55:33 -0800 Subject: cxgb3 - Limit multiqueue setting to msi-x Allow multiqueue setting in MSI-X mode only Signed-off-by: Divy Le Ray Signed-off-by: Jeff Garzik --- drivers/net/cxgb3/cxgb3_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 1ace41a13ac3..f66367ed6932 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2699,7 +2699,7 @@ static void set_nqsets(struct adapter *adap) int hwports = adap->params.nports; int nqsets = SGE_QSETS; - if (adap->params.rev > 0) { + if (adap->params.rev > 0 && adap->flags & USING_MSIX) { if (hwports == 2 && (hwports * nqsets > SGE_QSETS || num_cpus >= nqsets / hwports)) -- cgit v1.2.3 From cf3760dad576c8dfb4fef4b8a8a08a027bf02583 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 6 Nov 2008 17:06:42 -0600 Subject: RDMA/cxgb3: deadlock in iw_cxgb3 can cause hang when configuring interface. When the iw_cxgb3 module's cxgb3_client "add" func gets called by the cxgb3 module, the iwarp driver ends up calling the ethtool ops get_drvinfo function in cxgb3 to get the fw version and other info. Currently the iwarp driver grabs the rtnl lock around this down call to serialize. As of 2.6.27 or so, things changed such that the rtnl lock is held around the call to the netdev driver open function. Also the cxgb3_client "add" function doesn't get called if the device is down. So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the device, the iw_cxgb3 add func gets called with the rtnl_lock held. If you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add func gets called without the rtnl_lock held. The former causes the deadlock, the latter does not. In addition, there are iw_cxgb3 sysfs handlers that also can call down into cxgb3 to gather the fw and hw versions. These can be called concurrently on different processors and at any time. Thus we need to push this serialization down in the cxgb3 driver get_drvinfo func. The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3. Signed-off-by: Steve Wise Signed-off-by: Jeff Garzik --- drivers/infiniband/hw/cxgb3/iwch_provider.c | 6 ------ drivers/net/cxgb3/cxgb3_main.c | 2 ++ 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index ecff98043589..160ef482712d 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1102,9 +1102,7 @@ static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev) char *cp, *next; unsigned fw_maj, fw_min, fw_mic; - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); next = info.fw_version + 1; cp = strsep(&next, "."); @@ -1192,9 +1190,7 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.fw_version); } @@ -1207,9 +1203,7 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr, struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.driver); } diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index f66367ed6932..2c341f83d327 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) u32 fw_vers = 0; u32 tp_vers = 0; + spin_lock(&adapter->stats_lock); t3_get_fw_version(adapter, &fw_vers); t3_get_tp_version(adapter, &tp_vers); + spin_unlock(&adapter->stats_lock); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); -- cgit v1.2.3 From 347c8d83cd9f546a8357e1ab12fa6867707975d8 Mon Sep 17 00:00:00 2001 From: "Dasgupta, Romit" Date: Thu, 6 Nov 2008 15:46:18 +0530 Subject: [netdrvr] smc911x: fix for driver resume (and compilation warning) I am trying out suspend, resume on an OMAP3 based board. What I see during resume is that the SMC911x driver resume routing gets stuck after trying to transmit the packet out of the controller. Some debug messages below: --> smc911x_drv_resume eth0: --> smc911x_reset eth0: smc911x_reset timeout waiting for PM restore eth0: --> smc911x_enable eth0: --> smc911x_phy_configure() eth0: --> smc911x_phy_reset() eth0: phy caps=0x782d eth0: phy advertised caps=0x0de1 eth0: --> smc911x_phy_check_media smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809 smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809 eth0: link down Restarting tasks ... eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt nfs: server 172.24.190.217 not responding, still trying nfs: server 172.24.190.217 not responding, still trying The following change makes it work fine: (The change within smc911x_drv_probe function was to get rid of a compilation warning). Signed-off-by: Romit Dasgupta Signed-off-by: Jeff Garzik --- drivers/net/smc911x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 5051554ff05b..1f26ab0e7986 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -2050,7 +2050,9 @@ err_out: */ static int smc911x_drv_probe(struct platform_device *pdev) { +#ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; +#endif struct net_device *ndev; struct resource *res; struct smc911x_local *lp; @@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev) if (netif_running(ndev)) { smc911x_reset(ndev); - smc911x_enable(ndev); if (lp->phy_type != 0) smc911x_phy_configure(&lp->phy_configure); + smc911x_enable(ndev); netif_device_attach(ndev); } } -- cgit v1.2.3 From 5d5254f0d3b9bebc47d97e357374c0ad0c291a7d Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Sat, 25 Oct 2008 10:22:38 +0530 Subject: timers: handle HRTIMER_CB_IRQSAFE_UNLOCKED correctly from softirq context Impact: fix incorrect locking triggered during hotplug-intense stress-tests While migrating the the CB_IRQSAFE_UNLOCKED timers during a cpu-offline, we queue them on the cb_pending list, so that they won't go stale. Thus, when the callbacks of the timers run from the softirq context, they could run into potential deadlocks, since these callbacks assume that they're running with irq's disabled, thereby annoying lockdep! Fix this by emulating hardirq context while running these callbacks from the hrtimer softirq. ================================= [ INFO: inconsistent lock state ] 2.6.27 #2 -------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. ksoftirqd/0/4 [HC0[0]:SC1[1]:HE1:SE0] takes: (&rq->lock){++..}, at: [] sched_rt_period_timer+0x9e/0x1fc {in-hardirq-W} state was registered at: [] __lock_acquire+0x549/0x121e [] native_sched_clock+0x88/0x99 [] clocksource_get_next+0x39/0x3f [] update_wall_time+0x616/0x7df [] lock_acquire+0x5a/0x74 [] scheduler_tick+0x3a/0x18d [] _spin_lock+0x1c/0x45 [] scheduler_tick+0x3a/0x18d [] scheduler_tick+0x3a/0x18d [] update_process_times+0x3a/0x44 [] tick_periodic+0x63/0x6d [] tick_handle_periodic+0x14/0x5e [] timer_interrupt+0x44/0x4a [] handle_IRQ_event+0x13/0x3d [] handle_level_irq+0x79/0xbd [] do_IRQ+0x69/0x7d [] common_interrupt+0x28/0x30 [] aac_probe_one+0x1a3/0x3f3 [] _spin_unlock_irqrestore+0x36/0x39 [] setup_irq+0x1be/0x1f9 [] start_kernel+0x259/0x2c5 [] 0xffffffff irq event stamp: 50102 hardirqs last enabled at (50102): [] _spin_unlock_irq+0x20/0x23 hardirqs last disabled at (50101): [] _spin_lock_irq+0xa/0x4b softirqs last enabled at (50088): [] do_softirq+0x37/0x4d softirqs last disabled at (50099): [] do_softirq+0x37/0x4d other info that might help us debug this: no locks held by ksoftirqd/0/4. stack backtrace: Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.27 #2 [] print_usage_bug+0x13e/0x147 [] mark_lock+0x493/0x797 [] __lock_acquire+0x5be/0x121e [] lock_acquire+0x5a/0x74 [] sched_rt_period_timer+0x9e/0x1fc [] _spin_lock+0x1c/0x45 [] sched_rt_period_timer+0x9e/0x1fc [] sched_rt_period_timer+0x9e/0x1fc [] finish_task_switch+0x41/0xbd [] native_sched_clock+0x88/0x99 [] sched_rt_period_timer+0x0/0x1fc [] run_hrtimer_pending+0x54/0xe5 [] sched_rt_period_timer+0x0/0x1fc [] __do_softirq+0x7b/0xef [] do_softirq+0x37/0x4d [] ksoftirqd+0x56/0xc5 [] ksoftirqd+0x0/0xc5 [] kthread+0x38/0x5d [] kthread+0x0/0x5d [] kernel_thread_helper+0x7/0x10 ======================= Signed-off-by: Gautham R Shenoy Acked-by: Peter Zijlstra Acked-by: "Paul E. McKenney" Signed-off-by: Ingo Molnar --- kernel/hrtimer.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 2b465dfde426..95d3949f2ae5 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1209,6 +1209,7 @@ static void run_hrtimer_pending(struct hrtimer_cpu_base *cpu_base) enum hrtimer_restart (*fn)(struct hrtimer *); struct hrtimer *timer; int restart; + int emulate_hardirq_ctx = 0; timer = list_entry(cpu_base->cb_pending.next, struct hrtimer, cb_entry); @@ -1217,10 +1218,24 @@ static void run_hrtimer_pending(struct hrtimer_cpu_base *cpu_base) timer_stats_account_hrtimer(timer); fn = timer->function; + /* + * A timer might have been added to the cb_pending list + * when it was migrated during a cpu-offline operation. + * Emulate hardirq context for such timers. + */ + if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU || + timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) + emulate_hardirq_ctx = 1; + __remove_hrtimer(timer, timer->base, HRTIMER_STATE_CALLBACK, 0); spin_unlock_irq(&cpu_base->lock); - restart = fn(timer); + if (unlikely(emulate_hardirq_ctx)) { + local_irq_disable(); + restart = fn(timer); + local_irq_enable(); + } else + restart = fn(timer); spin_lock_irq(&cpu_base->lock); -- cgit v1.2.3 From 6a13378a56ce06afca9db75f3d4e663fba5f0992 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Sun, 19 Oct 2008 20:10:13 -0300 Subject: V4L/DVB (9337a): HID: Don't allow KWorld radio fm700 be handled by usb hid drivers This device is already handled by radio-si470x driver, and we therefore want usbhid to ignore it. Signed-off-by: Alexey Klimov Acked-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 1903e7515650..d3671b4049c0 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1265,6 +1265,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 5cc404291736..f05bcbbbb0d5 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -253,6 +253,9 @@ #define USB_VENDOR_ID_KBGEAR 0x084e #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001 +#define USB_VENDOR_ID_KWORLD 0x1b80 +#define USB_DEVICE_ID_KWORLD_RADIO_FM700 0xd700 + #define USB_VENDOR_ID_LABTEC 0x1020 #define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006 -- cgit v1.2.3 From f7378995951a2c5e4e836df84e5669bc72c8dda8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 18 Oct 2008 11:05:58 -0300 Subject: V4L/DVB (9337b): remove tuner-3036 and dpc7146 drivers from feature-removal-schedule.txt The tuner-3036 and dpc7146 drivers have been deleted now so we can remove the corresponding entries from feature-removal-schedule.txt. (Thanks for doing this, BTW.) Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- Documentation/feature-removal-schedule.txt | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 05d71b4b9430..c28a2ac88f9d 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -56,30 +56,6 @@ Who: Mauro Carvalho Chehab --------------------------- -What: old tuner-3036 i2c driver -When: 2.6.28 -Why: This driver is for VERY old i2c-over-parallel port teletext receiver - boxes. Rather then spending effort on converting this driver to V4L2, - and since it is extremely unlikely that anyone still uses one of these - devices, it was decided to drop it. -Who: Hans Verkuil - Mauro Carvalho Chehab - - --------------------------- - -What: V4L2 dpc7146 driver -When: 2.6.28 -Why: Old driver for the dpc7146 demonstration board that is no longer - relevant. The last time this was tested on actual hardware was - probably around 2002. Since this is a driver for a demonstration - board the decision was made to remove it rather than spending a - lot of effort continually updating this driver to stay in sync - with the latest internal V4L2 or I2C API. -Who: Hans Verkuil - Mauro Carvalho Chehab - ---------------------------- - What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl]) When: November 2005 Files: drivers/pcmcia/: pcmcia_ioctl.c -- cgit v1.2.3 From 3b37a15c2d75585cc0da49b8e69345af91e227ce Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Mon, 20 Oct 2008 18:14:14 -0300 Subject: V4L/DVB (9346): Optimization: Enable gate in a symmetric/disciplined way, rather than implementing different ways leading to confusion. This allows multiple gate_enable/disable's in the tuner_read/write functions, thereby lesser number of I/O operations throughout, eventually leading to better results. As a side effect demods that detect the STOP bit for auto closing of the gate can be avoided, thereby a very minimal gain in disabling the auto detect feature as well. Improves readability on the device control. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 5689d1f1d444..8557bf12cfb4 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -223,6 +223,8 @@ static void dvb_frontend_init(struct dvb_frontend *fe) if (fe->ops.init) fe->ops.init(fe); if (fe->ops.tuner_ops.init) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); fe->ops.tuner_ops.init(fe); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); -- cgit v1.2.3 From e62b47565a865d77133c88aee6a2a14838aeb9b8 Mon Sep 17 00:00:00 2001 From: Antoine Jacquet Date: Tue, 21 Oct 2008 17:54:51 -0300 Subject: V4L/DVB (9348): dtv5100: add dependency on zl10353 Update Kconfig to add missing dependency on zl10353 for dtv5100 driver. Signed-off-by: Antoine Jacquet Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 3c13bcfa6385..47488a97a856 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -283,6 +283,7 @@ config DVB_USB_ANYSEE config DVB_USB_DTV5100 tristate "AME DTV-5100 USB2.0 DVB-T support" depends on DVB_USB + select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. -- cgit v1.2.3 From 69df96c3dad0704301cdbd665636d8184fb314c6 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 23 Oct 2008 09:20:27 -0300 Subject: V4L/DVB (9350): radio-si470x: add support for kworld usb radio This patch add support for new device named KWorld USB FM Radio SnapMusic Mobile 700 (FM700). And changes few lines in comments. Signed-off-by: Alexey Klimov Acked-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-si470x.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 5920cd306975..a20583c13b68 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -4,6 +4,7 @@ * Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers: * - Silicon Labs USB FM Radio Reference Design * - ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) + * - KWorld USB FM Radio SnapMusic Mobile 700 (FM700) * * Copyright (c) 2008 Tobias Lorenz * @@ -105,6 +106,9 @@ * - afc indication * - more safety checks, let si470x_get_freq return errno * - vidioc behavior corrected according to v4l2 spec + * 2008-10-20 Alexey Klimov + * - add support for KWorld USB FM Radio FM700 + * - blacklisted KWorld radio in hid-core.c and hid-ids.h * * ToDo: * - add firmware download/update support @@ -145,6 +149,8 @@ static struct usb_device_id si470x_usb_driver_id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, /* ADS/Tech FM Radio Receiver (formerly Instant FM Music) */ { USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) }, + /* KWorld USB FM Radio SnapMusic Mobile 700 (FM700) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) }, /* Terminating entry */ { } }; -- cgit v1.2.3 From a24ddee36ca10a90451552e6620ff7c4ff7e44b5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 23 Oct 2008 09:53:56 -0300 Subject: V4L/DVB (9351): ibmcam: Fix a regression caused by a482f327ff56bc3cf53176a7eb736cea47291a1d As reported by David Ellingsworth: > I'm not sure if it matters or not, but the ibmcam driver in the > Mauro's linux-2.6 git tree in the for_linus branch is currently > broken. uvd is equal to NULL during most of ibmcam_probe. Due to that, an OOPS is generated at dev_info. This patch replaces uvd->dev->dev to dev->dev inside this routine. Signed-off-by: Mauro Carvalho Chehab Reviewed-by: David Ellingsworth --- drivers/media/video/usbvideo/ibmcam.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c index 28421d386f1e..c710bcd1df48 100644 --- a/drivers/media/video/usbvideo/ibmcam.c +++ b/drivers/media/video/usbvideo/ibmcam.c @@ -3695,7 +3695,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * unsigned char video_ep = 0; if (debug >= 1) - dev_info(&uvd->dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum); + dev_info(&dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum); /* We don't handle multi-config cameras */ if (dev->descriptor.bNumConfigurations != 1) @@ -3746,7 +3746,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */ break; } - dev_info(&uvd->dev->dev, + dev_info(&dev->dev, "%s USB camera found (model %d, rev. 0x%04x)\n", brand, model, le16_to_cpu(dev->descriptor.bcdDevice)); } while (0); @@ -3754,7 +3754,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * /* Validate found interface: must have one ISO endpoint */ nas = intf->num_altsetting; if (debug > 0) - dev_info(&uvd->dev->dev, "Number of alternate settings=%d.\n", + dev_info(&dev->dev, "Number of alternate settings=%d.\n", nas); if (nas < 2) { err("Too few alternate settings for this camera!"); @@ -3799,7 +3799,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * actInterface = i; maxPS = le16_to_cpu(endpoint->wMaxPacketSize); if (debug > 0) - dev_info(&uvd->dev->dev, + dev_info(&dev->dev, "Active setting=%d. " "maxPS=%d.\n", i, maxPS); } else @@ -3840,7 +3840,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * RESTRICT_TO_RANGE(framerate, 0, 5); break; default: - dev_info(&uvd->dev->dev, "IBM camera: using 320x240\n"); + dev_info(&dev->dev, "IBM camera: using 320x240\n"); size = SIZE_320x240; /* No break here */ case SIZE_320x240: @@ -3869,7 +3869,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * canvasY = 120; break; default: - dev_info(&uvd->dev->dev, "IBM NetCamera: using 176x144\n"); + dev_info(&dev->dev, "IBM NetCamera: using 176x144\n"); size = SIZE_176x144; /* No break here */ case SIZE_176x144: -- cgit v1.2.3 From c7f09db6852d85e7f76322815051aad1c88d08cf Mon Sep 17 00:00:00 2001 From: Gregor Jasny Date: Thu, 23 Oct 2008 09:55:22 -0300 Subject: V4L/DVB (9352): Add some missing compat32 ioctls This patch adds the missing compat ioctls that are needed to operate Skype in combination with libv4l and a MJPEG only camera. If you think it's trivial enough please submit it to -stable, too. Signed-off-by: Gregor Jasny Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/compat_ioctl32.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index bd5d9de5a008..e6ca4012b5f0 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -867,6 +867,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_STREAMON32: case VIDIOC_STREAMOFF32: case VIDIOC_G_PARM: + case VIDIOC_S_PARM: case VIDIOC_G_STD: case VIDIOC_S_STD: case VIDIOC_G_TUNER: @@ -885,6 +886,8 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_S_INPUT32: case VIDIOC_TRY_FMT32: case VIDIOC_S_HW_FREQ_SEEK: + case VIDIOC_ENUM_FRAMESIZES: + case VIDIOC_ENUM_FRAMEINTERVALS: ret = do_video_ioctl(file, cmd, arg); break; -- cgit v1.2.3 From 74084d33cb6221a5836a2a4438ec1bcf7a0797b0 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Fri, 17 Oct 2008 20:19:29 -0300 Subject: V4L/DVB (9355): de-BKL cafe_ccic.c Remove lock_kernel() call from cafe_ccic.c Commit d56dc61265d2527a63ab5b0f03199a43cd89ca36 added lock_kernel() calls to cafe_ccic.c. But that driver was written with proper locking and does not need the BKL, so take it back out. Signed-off-by: Jonathan Corbet Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cafe_ccic.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index a8c068e1de1c..1740b9ebdcef 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -1476,12 +1476,9 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp) { struct cafe_camera *cam; - lock_kernel(); cam = cafe_find_dev(iminor(inode)); - if (cam == NULL) { - unlock_kernel(); + if (cam == NULL) return -ENODEV; - } filp->private_data = cam; mutex_lock(&cam->s_mutex); @@ -1493,7 +1490,6 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp) } (cam->users)++; mutex_unlock(&cam->s_mutex); - unlock_kernel(); return 0; } -- cgit v1.2.3 From d522af581c6abd0e064278345ca638b0553a93fa Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 20 Oct 2008 17:57:02 -0300 Subject: V4L/DVB (9356): [PATCH] saa7134: fix resource map sanity check conflict Impact: driver could possibly stomp on resources outside of its scope {mchehab@redhat.com: I got two versions of the same patch (identical, except for whitespacing). One authored by Andy Burns and another authored by Suresh Siddha. Due to that, I'm applying the one that has less CodingStyle errors. I'm also adding both comments and the SOB's for both patches, since they are both interesting} Suresh Siddha commented: Alexey Fisher reported: > resource map sanity check conflict: 0xcfeff800 0xcff007ff 0xcfe00000 > 0xcfefffff PCI Bus 0000:01 BAR base is located in the middle of the 4K page and the hardcoded size argument makes the request span two pages causing the conflict. Fix the hard coded size argument in ioremap(). Andy Burns commented: I have already sent this patch on the linux-dvb list, but it didn't get much attention, so re-sending direct, I hope you all don't mind. While attempting to run mythtv in a xen domU, I encountered problems loading the driver for my saa7134 card, with an error from ioremap(). This error was due to the driver allocating an incorrectly sized mmio area, which was trapped by xen's permission checks, but this would go un-noticed on a kernel without xen. My card has a 1K sized mmio area, I've had information that other cards have 2K areas, perhaps others have different sizes, yet the driver always attempts to map 4K. I realise that the granularity of mapping is the page size, which typically would be 4K, but unless the card's base address happens to fall on a 4K boundary (mine does not) then the base+4K will end up spanning two pages, and this is when the error occurs under xen. My patch uses the pci_resource_len macro to determine the size required for the user's particular card, instead of the hardcoded 4K value. I've tested with a couple of printk() inside ioremap() that the start address and size do get rounded to the closest page boundary. With this patch I am able to successfully load the saa7134 driver and run mythtv under xen with my card, subject to correct pollirq settings in case of shared IRQ, I am still seeing occasional DMA panics, which I think are related to swiotlb handling by dom0/domU, usually the panic occurs when changing mux, once tuned to a mux, 12 hour continuous recordings are possible without errors. Reported-by: Alexey Fisher Tested-by: Alexey Fisher Signed-off-by: Suresh Siddha Signed-off-by: Andy Burns Signed-off-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 249184452949..dfbe08a9ad9b 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -941,7 +941,8 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, dev->name,(unsigned long long)pci_resource_start(pci_dev,0)); goto fail1; } - dev->lmmio = ioremap(pci_resource_start(pci_dev,0), 0x1000); + dev->lmmio = ioremap(pci_resource_start(pci_dev, 0), + pci_resource_len(pci_dev, 0)); dev->bmmio = (__u8 __iomem *)dev->lmmio; if (NULL == dev->lmmio) { err = -EIO; -- cgit v1.2.3 From 0e8bac9791b1539b72b8049b18218eb762d94d71 Mon Sep 17 00:00:00 2001 From: Matthias Schwarzott Date: Fri, 24 Oct 2008 10:47:07 -0300 Subject: V4L/DVB (9357): cx88-dvb: Fix Oops in case i2c bus failed to register There already is an report at kernel bugzilla about this issue: http://bugzilla.kernel.org/show_bug.cgi?id=9455 When enabling extra checks for the i2c-bus of cx88 based cards by loading i2c_algo_bit with bit_test=1 this may trigger an oops when loading cx88_dvb. This is caused by the extra check code that detects that the sda-line is stuck high and thus does not register the i2c-bus. cx88-dvb however does not check if the i2c-bus is valid and just uses core->i2c_adap to attach dvb frontend modules. This leads to an oops at the first call to i2c_transfer: $ modprobe i2c_algo_bit bit_test=1 $ modprobe cx8802 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88[0]: quirk: PCIPCI_NATOMA -- set TBFX cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected], frontend(s): 1 cx88[0]: TV tuner type 4, Radio tuner type -1 cx88[0]: SDA stuck high! cx88[0]: i2c register FAILED input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input5 cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:00:10.2: enabling device (0154 -> 0156) cx88-mpeg driver manager 0000:00:10.2: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 cx88[0]/2: found at 0000:00:10.2, rev: 5, irq: 9, latency: 64, mmio: 0xfb000000 cx8802_probe() allocating 1 frontend(s) cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37] cx88[0]/2: cx2388x based DVB/ATSC card BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [] :i2c_core:i2c_transfer+0x1f/0x80 *pde = 00000000 Modules linked in: cx88_dvb(+) cx8802 cx88xx ir_common i2c_algo_bit tveeprom videobuf_dvb btcx_risc mga drm ipv6 fscpos eeprom nfsd exportfs stv0299 b2c2_flexcop_pci b2c2_flexcop cx24123 s5h1420 ves1x93 dvb_ttpci dvb_core saa7146_vv saa7146 videobuf_dma_sg videobuf_core videodev v4l1_compat ttpci_eeprom lirc_serial lirc_dev usbhid rtc uhci_hcd 8139too i2c_piix4 i2c_core usbcore evdev Pid: 4249, comm: modprobe Not tainted (2.6.27-gentoo #3) EIP: 0060:[] EFLAGS: 00010296 CPU: 0 EIP is at i2c_transfer+0x1f/0x80 [i2c_core] EAX: 00000000 EBX: ffffffa1 ECX: 00000002 EDX: d6c71e3c ESI: d80cd050 EDI: d8093c00 EBP: d6c71e20 ESP: d6c71e0c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-dvb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index cf6c30d4e545..309ca5e68063 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -598,6 +598,11 @@ static int dvb_register(struct cx8802_dev *dev) struct videobuf_dvb_frontend *fe0, *fe1 = NULL; int mfe_shared = 0; /* bus not shared by default */ + if (0 != core->i2c_rc) { + printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); + goto frontend_detach; + } + /* Get the first frontend */ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); if (!fe0) -- cgit v1.2.3 From bdb6ee32536b881085a99fabff7bdfe359e3461b Mon Sep 17 00:00:00 2001 From: Thierry MERLE Date: Thu, 23 Oct 2008 17:49:49 -0300 Subject: V4L/DVB (9358): CinergyT2: fix Kconfig typo config\tDVB_USB_CINERGY_T2 causes the make_kconfig.pl to forget to enable by default the compilation of cinergyT2 module. Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 47488a97a856..62b68c291d99 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -261,7 +261,7 @@ config DVB_USB_DW2102 Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers and the TeVii S650. -config DVB_USB_CINERGY_T2 +config DVB_USB_CINERGY_T2 tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" depends on DVB_USB help -- cgit v1.2.3 From e8deeae24f8b55a7203bec9b056593d9c62fae68 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 22 Oct 2008 10:57:37 -0300 Subject: V4L/DVB (9367a): Add gspca driver and subdrivers to MAINTAINERS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Costantino Leandro Signed-off-by: Erik Andrén Signed-off-by: Frank Zago Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 7e6a17e1de09..53e78c83cc7a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1879,6 +1879,37 @@ M: linux-kernel@vger.kernel.org W: http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/ S: Maintained +GSPCA FINEPIX SUBDRIVER +P: Frank Zago +M: frank@zago.net +L: video4linux-list@redhat.com +S: Maintained + +GSPCA M5602 SUBDRIVER +P: Erik Andren +M: erik.andren@gmail.com +L: video4linux-list@redhat.com +S: Maintained + +GSPCA PAC207 SONIXB SUBDRIVER +P: Hans de Goede +M: hdegoede@redhat.com +L: video4linux-list@redhat.com +S: Maintained + +GSPCA T613 SUBDRIVER +P: Leandro Costantino +M: lcostantino@gmail.com +L: video4linux-list@redhat.com +S: Maintained + +GSPCA USB WEBCAM DRIVER +P: Jean-Francois Moine +M: moinejf@free.fr +W: http://moinejf.free.fr +L: video4linux-list@redhat.com +S: Maintained + HARDWARE MONITORING L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -- cgit v1.2.3 From b058e3f39508a3876a4fbf4a92398c817cf82809 Mon Sep 17 00:00:00 2001 From: Rafael Diniz Date: Fri, 24 Oct 2008 23:07:57 -0300 Subject: V4L/DVB (9368): VBI fix for cx88 cards The attached patch fix VBI support cx88 card. I'm running a capture for hours, getting the closed caption from it[1], and it's working perfect - the output is the same of a bttv card. Please apply this patch as soon as possible. [1] - using zvbi-ntsc-cc of zvbi project. Signed-off-by: Rafael Diniz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-video.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 61265fd04d56..b96ce991d968 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1216,8 +1216,12 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) struct cx8800_fh *fh = priv; struct cx8800_dev *dev = fh->dev; - if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) + /* We should remember that this driver also supports teletext, */ + /* so we have to test if the v4l2_buf_type is VBI capture data. */ + if (unlikely((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE))) return -EINVAL; + if (unlikely(i != fh->type)) return -EINVAL; @@ -1232,8 +1236,10 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) struct cx8800_dev *dev = fh->dev; int err, res; - if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)) return -EINVAL; + if (i != fh->type) return -EINVAL; -- cgit v1.2.3 From 0d0f1e0a1d6ef2d0ea249930c5ea71d990fc0b6e Mon Sep 17 00:00:00 2001 From: Rafael Diniz Date: Wed, 22 Oct 2008 18:02:09 -0300 Subject: V4L/DVB (9369): Documentation update for cx88 Attached is a patch that updates the cx88 documentation to add the fact the closed caption works for at least NTSC capture. ps: I also updated the wiki at: http://www.linuxtv.org/v4lwiki/index.php/Text_capture#cx88_devices Signed-off-by: Rafael Diniz Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/README.cx88 | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/video4linux/README.cx88 b/Documentation/video4linux/README.cx88 index 06a33a4f52fd..166d5960b1a9 100644 --- a/Documentation/video4linux/README.cx88 +++ b/Documentation/video4linux/README.cx88 @@ -27,8 +27,8 @@ audio sound card) should be possible, but there is no code yet ... vbi - - some code present. Doesn't crash any more, but also doesn't - work yet ... + - Code present. Works for NTSC closed caption. PAL and other + TV norms may or may not work. how to add support for new cards -- cgit v1.2.3 From 8182ff69f8675fc1847a399be4eea5e8118a8dd3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 24 Oct 2008 15:08:28 -0300 Subject: V4L/DVB (9372): Minor fixes to the saa7110 driver * Apparently the author of the saa7110 driver was confused by the number of outputs returned by DECODER_GET_CAPABILITIES. Of course a decoder chip has no analog ouputs, but it must have at least one digital output. * Fix an off-by-one error when checking the input value of DECODER_SET_INPUT. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7110.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index adf2ba79496a..37860698f782 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -47,7 +47,7 @@ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); #define SAA7110_MAX_INPUT 9 /* 6 CVBS, 3 SVHS */ -#define SAA7110_MAX_OUTPUT 0 /* its a decoder only */ +#define SAA7110_MAX_OUTPUT 1 /* 1 YUV */ #define SAA7110_NR_REG 0x35 @@ -327,7 +327,7 @@ saa7110_command (struct i2c_client *client, case DECODER_SET_INPUT: v = *(int *) arg; - if (v < 0 || v > SAA7110_MAX_INPUT) { + if (v < 0 || v >= SAA7110_MAX_INPUT) { v4l_dbg(1, debug, client, "input=%d not available\n", v); return -EINVAL; } -- cgit v1.2.3 From f3a3e881b81ae33b786759c7042de974c1e0bbf7 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 25 Oct 2008 23:27:06 -0300 Subject: V4L/DVB (9475): cx18: Disable write retries for registers that always change - part 1. cx18: Disable write retries for registers that always change - part 1. Interrupt related registers will likely not read back the value we just wrote. Disable retries for these registers for now to avoid accidently discarding interrupts. More intelligent read back verification criteria are needed for these and other registers (e.g. GPIO line registers), which will be addressed in subsequent changes. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-io.c | 4 ++-- drivers/media/video/cx18/cx18-irq.c | 6 +++--- drivers/media/video/cx18/cx18-mailbox.c | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c index 700ab9439c16..31be5e8684dc 100644 --- a/drivers/media/video/cx18/cx18-io.c +++ b/drivers/media/video/cx18/cx18-io.c @@ -218,7 +218,7 @@ void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) void cx18_sw1_irq_enable(struct cx18 *cx, u32 val) { u32 r; - cx18_write_reg(cx, val, SW1_INT_STATUS); + cx18_write_reg_noretry(cx, val, SW1_INT_STATUS); r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI); } @@ -233,7 +233,7 @@ void cx18_sw1_irq_disable(struct cx18 *cx, u32 val) void cx18_sw2_irq_enable(struct cx18 *cx, u32 val) { u32 r; - cx18_write_reg(cx, val, SW2_INT_STATUS); + cx18_write_reg_noretry(cx, val, SW2_INT_STATUS); r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI); } diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 360330f5463f..447fc9c391ac 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -149,9 +149,9 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask; - cx18_write_reg(cx, sw2&sw2_mask, SW2_INT_STATUS); - cx18_write_reg(cx, sw1&sw1_mask, SW1_INT_STATUS); - cx18_write_reg(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS); + cx18_write_reg_noretry(cx, sw2&sw2_mask, SW2_INT_STATUS); + cx18_write_reg_noretry(cx, sw1&sw1_mask, SW1_INT_STATUS); + cx18_write_reg_noretry(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS); if (sw1 || sw2 || hw2) CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 9d18dd22de76..87f7c8e2c181 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -176,7 +176,7 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) cx18_setup_page(cx, SCB_OFFSET); cx18_write_sync(cx, mb->request, &ack_mb->ack); - cx18_write_reg(cx, ack_irq, SW2_INT_SET); + cx18_write_reg_noretry(cx, ack_irq, SW2_INT_SET); return 0; } @@ -225,7 +225,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } if (info->flags & API_FAST) timeout /= 2; - cx18_write_reg(cx, irq, SW1_INT_SET); + cx18_write_reg_noretry(cx, irq, SW1_INT_SET); while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request) && cnt < 660) { -- cgit v1.2.3 From 6aadf82eb830cf2622f8803fd7f0414299e246d3 Mon Sep 17 00:00:00 2001 From: Tobias Lorenz Date: Tue, 28 Oct 2008 08:48:27 -0300 Subject: V4L/DVB (9482): Documentation, especially regarding audio and informational links This patch adds a recommendation to select SND_USB_AUDIO for listing and adds a documentation file for si470x. Signed-off-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/si470x.txt | 118 +++++++++++++++++++++++++++++++++++ drivers/media/radio/Kconfig | 14 +++++ drivers/media/radio/radio-si470x.c | 13 ---- 3 files changed, 132 insertions(+), 13 deletions(-) create mode 100644 Documentation/video4linux/si470x.txt diff --git a/Documentation/video4linux/si470x.txt b/Documentation/video4linux/si470x.txt new file mode 100644 index 000000000000..11c5fd22a332 --- /dev/null +++ b/Documentation/video4linux/si470x.txt @@ -0,0 +1,118 @@ +Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers + +Copyright (c) 2008 Tobias Lorenz + + +Information from Silicon Labs +============================= +Silicon Laboratories is the manufacturer of the radio ICs, that nowadays are the +most often used radio receivers in cell phones. Usually they are connected with +I2C. But SiLabs also provides a reference design, which integrates this IC, +together with a small microcontroller C8051F321, to form a USB radio. +Part of this reference design is also a radio application in binary and source +code. The software also contains an automatic firmware upgrade to the most +current version. Information on these can be downloaded here: +http://www.silabs.com/usbradio + + +Supported ICs +============= +The following ICs have a very similar register set, so that they are or will be +supported somewhen by the driver: +- Si4700: FM radio receiver +- Si4701: FM radio receiver, RDS Support +- Si4702: FM radio receiver +- Si4703: FM radio receiver, RDS Support +- Si4704: FM radio receiver, no external antenna required +- Si4705: FM radio receiver, no external antenna required, RDS support, Dig I/O +- Si4706: Enhanced FM RDS/TMC radio receiver, no external antenna required, RDS + Support +- Si4707: Dedicated weather band radio receiver with SAME decoder, RDS Support +- Si4708: Smallest FM receivers +- Si4709: Smallest FM receivers, RDS Support +More information on these can be downloaded here: +http://www.silabs.com/products/mcu/Pages/USBFMRadioRD.aspx + + +Supported USB devices +===================== +Currently the following USB radios (vendor:product) with the Silicon Labs si470x +chips are known to work: +- 10c4:818a: Silicon Labs USB FM Radio Reference Design +- 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) +- 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700) + + +Software +======== +Testing is usually done with most application under Debian/testing: +- fmtools - Utility for managing FM tuner cards +- gnomeradio - FM-radio tuner for the GNOME desktop +- gradio - GTK FM radio tuner +- kradio - Comfortable Radio Application for KDE +- radio - ncurses-based radio application + +There is also a library libv4l, which can be used. It's going to have a function +for frequency seeking, either by using hardware functionality as in radio-si470x +or by implementing a function as we currently have in every of the mentioned +programs. Somewhen the radio programs should make use of libv4l. + +For processing RDS information, there is a project ongoing at: +http://rdsd.berlios.de/ + +There is currently no project for making TMC sentences human readable. + + +Audio Listing +============= +USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to +also select SND_USB_AUDIO, as this is required to get sound from the radio. For +listing you have to redirect the sound, for example using one of the following +commands. + +If you just want to test audio (very poor quality): +cat /dev/dsp1 > /dev/dsp + +If you use OSS try: +sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp + +If you use arts try: +arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B - + + +Module Parameters +================= +After loading the module, you still have access to some of them in the sysfs +mount under /sys/module/radio_si470x/parameters. The contents of read-only files +(0444) are not updated, even if space, band and de are changed using private +video controls. The others are runtime changeable. + + +Errors +====== +Increase tune_timeout, if you often get -EIO errors. + +When timed out or band limit is reached, hw_freq_seek returns -EAGAIN. + +If you get any errors from snd_usb_audio, please report them to the ALSA people. + + +Open Issues +=========== +V4L minor device allocation and parameter setting is not perfect. A solution is +currently under discussion. + +There is an USB interface for downloading/uploading new firmware images. Support +for it can be implemented using the request_firmware interface. + +There is a RDS interrupt mode. The driver is already using the same interface +for polling RDS information, but is currently not using the interrupt mode. + +There is a LED interface, which can be used to override the LED control +programmed in the firmware. This can be made available using the LED support +functions in the kernel. + + +Other useful information and links +================================== +http://www.silabs.com/usbradio diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 04cd7c04bdde..5189c4eb439f 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -355,6 +355,20 @@ config USB_SI470X tristate "Silicon Labs Si470x FM Radio Receiver support" depends on USB && VIDEO_V4L2 ---help--- + This is a driver for USB devices with the Silicon Labs SI470x + chip. Currently these devices are known to work: + - 10c4:818a: Silicon Labs USB FM Radio Reference Design + - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) + - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700) + + Sound is provided by the ALSA USB Audio/MIDI driver. Therefore + if you don't want to use the device solely for RDS receiving, + it is recommended to also select SND_USB_AUDIO. + + Please have a look at the documentation, especially on how + to redirect the audio stream from the radio to your sound device: + Documentation/video4linux/si470x.txt + Say Y here if you want to connect this type of radio to your computer's USB port. diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index a20583c13b68..3e1830293de5 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -24,19 +24,6 @@ */ -/* - * User Notes: - * - USB Audio is provided by the alsa snd_usb_audio module. - * For listing you have to redirect the sound, for example using: - * arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B - - * - regarding module parameters in /sys/module/radio_si470x/parameters: - * the contents of read-only files (0444) are not updated, even if - * space, band and de are changed using private video controls - * - increase tune_timeout, if you often get -EIO errors - * - hw_freq_seek returns -EAGAIN, when timed out or band limit is reached - */ - - /* * History: * 2008-01-12 Tobias Lorenz -- cgit v1.2.3 From 6a95ec590647989089b86a6d04c5f064240cb033 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 28 Oct 2008 10:44:12 -0300 Subject: V4L/DVB (9485): ivtv: remove incorrect V4L1 & tvaudio dependency ivtv used tvaudio in the past and at the time tvaudio required V4L1. Since tvaudio is no longer dependent on V4L1 and since ivtv actually no longer uses tvaudio at all, this is no removed from Kconfig. Without this patch ivtv won't be build if V4L1 is disabled. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig index 0069898bddab..d62f2bb5cf0e 100644 --- a/drivers/media/video/ivtv/Kconfig +++ b/drivers/media/video/ivtv/Kconfig @@ -1,6 +1,6 @@ config VIDEO_IVTV tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support" - depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL + depends on VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL depends on INPUT # due to VIDEO_IR select I2C_ALGOBIT select VIDEO_IR @@ -12,7 +12,6 @@ config VIDEO_IVTV select VIDEO_SAA711X select VIDEO_SAA717X select VIDEO_SAA7127 - select VIDEO_TVAUDIO select VIDEO_CS53L32A select VIDEO_M52790 select VIDEO_WM8775 -- cgit v1.2.3 From 7c34158f206dca89c717e6818d04b8db187155a3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 28 Oct 2008 10:45:46 -0300 Subject: V4L/DVB (9486): ivtv/ivtvfb: no longer experimental Remove the EXPERIMENTAL tag. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig index d62f2bb5cf0e..c46bfb1569e3 100644 --- a/drivers/media/video/ivtv/Kconfig +++ b/drivers/media/video/ivtv/Kconfig @@ -1,6 +1,6 @@ config VIDEO_IVTV tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support" - depends on VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL + depends on VIDEO_V4L2 && PCI && I2C depends on INPUT # due to VIDEO_IR select I2C_ALGOBIT select VIDEO_IR @@ -31,7 +31,7 @@ config VIDEO_IVTV config VIDEO_FB_IVTV tristate "Conexant cx23415 framebuffer support" - depends on VIDEO_IVTV && FB && EXPERIMENTAL + depends on VIDEO_IVTV && FB select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -- cgit v1.2.3 From 8268c8f54505e5b952d1705a7bf3b2a218ed26bf Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Mon, 2 Jun 2008 20:05:14 -0300 Subject: V4L/DVB (9492): unplug oops from dvb_frontend_init... When inadvertently hot-unplugging a WT-220U USB DVB-T receiver with 2.6.24, I was met with an oops [1]. The problem is relevant to 2.6.25/26-rc also. dvb_frontend_init() was called either from re-creation of the kdvb-fe0 thread - seems unlikely, or someone called dvb_frontend_reinitialise(), causing this path in the thread - really unlikely, as I can't find any call-site for it. Either way, quite a number of drivers call dvb_usb_generic_rw() [2] without checking the validity of the relevant member in the dvb_usb_device struct - which had changed. Having dvb_usb_generic_rw() sanity-check and fail (rather than loading from 0x120) seems reasonable defensive programming [3], in light of it being called in this way. The problem with this, is that drivers don't check the return code of the init call [4]. Does it make sense to cook a patch which allows the failure to be propagated back up, or am I missing something else? Thanks, Daniel [83711.538485] dvb-usb: bulk message failed: -71 (1/0) [83711.538875] dvb-usb: bulk message failed: -71 (1/0) [83711.538899] usb 7-5: USB disconnect, address 3 [83711.538905] dvb-usb: bulk message failed: -22 (1/0) [83711.538924] dvb-usb: bulk message failed: -22 (1/0) [83711.538943] dvb-usb: bulk message failed: -22 (1/0) [83711.588979] dvb-usb: bulk message failed: -22 (1/0) [83711.589031] dvb-usb: bulk message failed: -22 (1/0) [83711.589078] dvb-usb: bulk message failed: -22 (1/0) [83711.589122] dvb-usb: bulk message failed: -22 (1/0) [83711.589167] dvb-usb: bulk message failed: -22 (1/0) [83711.639233] dvb-usb: bulk message failed: -22 (1/0) [83711.639282] dvb-usb: bulk message failed: -22 (1/0) [83711.639330] dvb-usb: bulk message failed: -22 (1/0) [83711.639374] dvb-usb: bulk message failed: -22 (1/0) [83711.639421] dvb-usb: bulk message failed: -22 (1/0) [83711.658391] dvb-usb: bulk message failed: -22 (1/0) [83768.174281] dvb-usb: bulk message failed: -22 (2/-32512) [83768.174350] Unable to handle kernel NULL pointer dereference<6>dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully deinitialized and disconnected. [83768.174459] at 0000000000000120 RIP: [83768.174459] [] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.174580] PGD 0 [83768.174643] Oops: 0000 [1] SMP [83768.174723] CPU 0 [83768.174782] Modules linked in: nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc af_packet xt_length ipt_tos ipt_TOS xt_CLASSIFY sch_sfq sch_htb ipt_MASQUERADE ipt_REDIRECT xt_limit xt_state xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle iptable_filter ip_tables x_tables xfs sbp2 parport_pc lp parport loop ftdi_sio usbserial evdev dvb_usb_dtt200u dvb_usb dvb_core i2c_core sky2 iTCO_wdt iTCO_vendor_support snd_hda_intel shpchp snd_pcm snd_timer snd_page_alloc snd_hwdep snd pci_hotplug soundcore ipv6 button intel_agp ext3 jbd mbcache sg sd_mod ata_generic pata_acpi ahci ata_piix libata scsi_mod ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore e1000 thermal processor fan fbcon tileblit font bitblit softcursor fuse [83768.176968] Pid: 5732, comm: kdvb-fe-0 Not tainted 2.6.24-16-server #1 [83768.177009] RIP: 0010:[] [] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.177096] RSP: 0018:ffff810021939df0 EFLAGS: 00010286 [83768.177138] RAX: ffff81003bc7cc00 RBX: 0000000000000001 RCX: 0000000000000000 [83768.177181] RDX: 0000000000000001 RSI: ffff810021939e67 RDI: 0000000000000000 [83768.177223] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [83768.177267] R10: ffff810001009880 R11: 0000000000000001 R12: ffff81003c10b400 [83768.177311] R13: ffff81003c10b5b0 R14: ffff810021939ec0 R15: 0000000000000000 [83768.177354] FS: 0000000000000000(0000) GS:ffffffff805c3000(0000) knlGS:0000000000000000 [83768.177409] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [83768.177449] CR2: 0000000000000120 CR3: 0000000000201000 CR4: 00000000000006e0 [83768.177491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [83768.177534] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [83768.177576] Process kdvb-fe-0 (pid: 5732, threadinfo ffff810021938000, task ffff81003bd1b7a0) [83768.177629] Stack: ffff81003e9b6828 0000000000000000 ffff8100378369f8 0000000000000000 [83768.177800] ffff81003bd1b7a0 ffff810037836d48 ffff81003bc7cc30 ffff81003c10b400 [83768.177943] ffff81003c10b5b0 ffff810021939ec0 ffff81003c10b5e0 ffffffff88342452 [83768.178054] Call Trace: [83768.178130] [] :dvb_usb_dtt200u:dtt200u_fe_init+0x22/0x30 [83768.178178] [] :dvb_usb:dvb_usb_fe_wakeup+0x3a/0x50 [83768.178229] [] :dvb_core:dvb_frontend_init+0x21/0x70 [83768.178278] [] :dvb_core:dvb_frontend_thread+0x8b/0x370 [83768.178329] [] :dvb_core:dvb_frontend_thread+0x0/0x370 [83768.178382] [] kthread+0x4b/0x80 [83768.178427] [] child_rip+0xa/0x12 [83768.178473] [] kthread+0x0/0x80 [83768.178514] [] child_rip+0x0/0x12 [83768.178557] [83768.178594] [83768.178594] Code: 44 8b 87 20 01 00 00 49 89 f4 45 89 ce 45 85 c0 0f 84 ad 00 [83768.179167] RIP [] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.179234] RSP [83768.179271] CR2: 0000000000000120 [83768.179419] ---[ end trace dba8483163cb1700 ]--- Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dvb-usb-urb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c index 5cef12a07f72..6fe71c6745eb 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c @@ -13,14 +13,14 @@ int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, { int actlen,ret = -ENOMEM; + if (!d || wbuf == NULL || wlen == 0) + return -EINVAL; + if (d->props.generic_bulk_ctrl_endpoint == 0) { err("endpoint for generic control not specified."); return -EINVAL; } - if (wbuf == NULL || wlen == 0) - return -EINVAL; - if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; -- cgit v1.2.3 From dec0c46ac2af9bbc4a2acd56e5bffbf02f20113e Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Wed, 29 Oct 2008 21:16:04 -0300 Subject: V4L/DVB (9494): anysee: initialize anysee_usb_mutex statically anysee_usb_mutex is initialized at every time the anysee device is probed. If the second anysee device is probed while anysee_usb_mutex is locked by the first anysee device, the mutex is broken. This patch fixes by initialize anysee_usb_mutex statically rather than initialize at probe time. Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/anysee.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index c786359fba03..cd2edbcaa097 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -46,7 +46,7 @@ module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644); MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static struct mutex anysee_usb_mutex; +static DEFINE_MUTEX(anysee_usb_mutex); static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen) @@ -456,8 +456,6 @@ static int anysee_probe(struct usb_interface *intf, struct usb_host_interface *alt; int ret; - mutex_init(&anysee_usb_mutex); - /* There is one interface with two alternate settings. Alternate setting 0 is for bulk transfer. Alternate setting 1 is for isochronous transfer. -- cgit v1.2.3 From a2482377c9df89daa0cb94252bd1e8829c0e9c2f Mon Sep 17 00:00:00 2001 From: Frederic CAND Date: Thu, 30 Oct 2008 04:46:42 -0300 Subject: V4L/DVB (9495): cx88-blackbird: bugfix: cx88-blackbird-poll-fix Starts encoder not only on a read call but also on a poll command. Signed-off-by: Frederic CAND Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-blackbird.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 078be6319556..ae77450f126b 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1158,6 +1158,10 @@ static unsigned int mpeg_poll(struct file *file, struct poll_table_struct *wait) { struct cx8802_fh *fh = file->private_data; + struct cx8802_dev *dev = fh->dev; + + if (!dev->mpeg_active) + blackbird_start_codec(file, fh); return videobuf_poll_stream(file, &fh->mpegq, wait); } -- cgit v1.2.3 From 9c8e0a260ed7c8935d7ee8dd51cd1971ef516385 Mon Sep 17 00:00:00 2001 From: Frederic CAND Date: Thu, 30 Oct 2008 04:50:05 -0300 Subject: V4L/DVB (9496): cx88-blackbird: bugfix: cx88-blackbird-mpeg-users Allows multiple access to the mpeg device Signed-off-by: Frederic CAND Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-blackbird.c | 8 ++++++-- drivers/media/video/cx88/cx88.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index ae77450f126b..d3ae5b4dfca7 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1078,7 +1078,7 @@ static int mpeg_open(struct inode *inode, struct file *file) } } - if (blackbird_initialize_codec(dev) < 0) { + if (!atomic_read(&dev->core->mpeg_users) && blackbird_initialize_codec(dev) < 0) { if (drv) drv->request_release(drv); unlock_kernel(); @@ -1109,6 +1109,8 @@ static int mpeg_open(struct inode *inode, struct file *file) fh->mpegq.field); unlock_kernel(); + atomic_inc(&dev->core->mpeg_users); + return 0; } @@ -1118,7 +1120,7 @@ static int mpeg_release(struct inode *inode, struct file *file) struct cx8802_dev *dev = fh->dev; struct cx8802_driver *drv = NULL; - if (dev->mpeg_active) + if (dev->mpeg_active && atomic_read(&dev->core->mpeg_users) == 1) blackbird_stop_codec(dev); cx8802_cancel_buffers(fh->dev); @@ -1138,6 +1140,8 @@ static int mpeg_release(struct inode *inode, struct file *file) if (drv) drv->request_release(drv); + atomic_dec(&dev->core->mpeg_users); + return 0; } diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 76207c2856b7..f4240965be32 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -352,6 +352,7 @@ struct cx88_core { /* various v4l controls */ u32 freq; atomic_t users; + atomic_t mpeg_users; /* cx88-video needs to access cx8802 for hybrid tuner pll access. */ struct cx8802_dev *dvbdev; -- cgit v1.2.3 From 1a8dc86db1546f60a25f2b5cd071c0091db87146 Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Thu, 30 Oct 2008 05:05:23 -0300 Subject: V4L/DVB (9499): cx88-mpeg: final fix for analogue only compilation + de-alloc fix Final fix for when analogue only is selected for compilation (ie, !CX88_DVB) This tidies up previous fix and adds missing de-alloc memory leak on fault (eg, if fe1 fails to alloc where fe0 was allocated). Signed-off-by: Darron Broad Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-mpeg.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index a1c435b4b1cd..3ebdcd1d83f8 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -769,10 +769,6 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, struct cx8802_dev *dev; struct cx88_core *core; int err; -#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) - struct videobuf_dvb_frontend *demod; - int i; -#endif /* general setup */ core = cx88_core_get(pci_dev); @@ -803,15 +799,21 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, mutex_init(&dev->frontends.lock); INIT_LIST_HEAD(&dev->frontends.felist); - if (core->board.num_frontends) - printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); - - for (i = 1; i <= core->board.num_frontends; i++) { - demod = videobuf_dvb_alloc_frontend(&dev->frontends, i); - if(demod == NULL) { - printk(KERN_ERR "%s() failed to alloc\n", __func__); - err = -ENOMEM; - goto fail_free; + if (core->board.num_frontends) { + struct videobuf_dvb_frontend *fe; + int i; + + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, + core->board.num_frontends); + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if(fe == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", + __func__); + videobuf_dvb_dealloc_frontends(&dev->frontends); + err = -ENOMEM; + goto fail_free; + } } } #endif -- cgit v1.2.3 From 58ae1c23184772a7b2d02a4a82f5515a7820a155 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 3 Nov 2008 08:06:51 -0300 Subject: V4L/DVB (9506): ivtv/cx18: fix test whether modules should be loaded or not. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.c | 4 ++-- drivers/media/video/ivtv/ivtv-driver.c | 26 +++++++++++++------------- 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 7a1a7830a6b3..6a840f2d81a0 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -581,10 +581,10 @@ static void cx18_load_and_init_modules(struct cx18 *cx) #ifdef MODULE /* load modules */ -#ifndef CONFIG_MEDIA_TUNER +#ifdef CONFIG_MEDIA_TUNER_MODULE hw = cx18_request_module(cx, hw, "tuner", CX18_HW_TUNER); #endif -#ifndef CONFIG_VIDEO_CS5345 +#ifdef CONFIG_VIDEO_CS5345_MODULE hw = cx18_request_module(cx, hw, "cs5345", CX18_HW_CS5345); #endif #endif diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index d36485023b68..b69cc1d55e5b 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -875,43 +875,43 @@ static void ivtv_load_and_init_modules(struct ivtv *itv) #ifdef MODULE /* load modules */ -#ifndef CONFIG_MEDIA_TUNER +#ifdef CONFIG_MEDIA_TUNER_MODULE hw = ivtv_request_module(itv, hw, "tuner", IVTV_HW_TUNER); #endif -#ifndef CONFIG_VIDEO_CX25840 +#ifdef CONFIG_VIDEO_CX25840_MODULE hw = ivtv_request_module(itv, hw, "cx25840", IVTV_HW_CX25840); #endif -#ifndef CONFIG_VIDEO_SAA711X +#ifdef CONFIG_VIDEO_SAA711X_MODULE hw = ivtv_request_module(itv, hw, "saa7115", IVTV_HW_SAA711X); #endif -#ifndef CONFIG_VIDEO_SAA7127 +#ifdef CONFIG_VIDEO_SAA7127_MODULE hw = ivtv_request_module(itv, hw, "saa7127", IVTV_HW_SAA7127); #endif -#ifndef CONFIG_VIDEO_SAA717X +#ifdef CONFIG_VIDEO_SAA717X_MODULE hw = ivtv_request_module(itv, hw, "saa717x", IVTV_HW_SAA717X); #endif -#ifndef CONFIG_VIDEO_UPD64031A +#ifdef CONFIG_VIDEO_UPD64031A_MODULE hw = ivtv_request_module(itv, hw, "upd64031a", IVTV_HW_UPD64031A); #endif -#ifndef CONFIG_VIDEO_UPD64083 +#ifdef CONFIG_VIDEO_UPD64083_MODULE hw = ivtv_request_module(itv, hw, "upd64083", IVTV_HW_UPD6408X); #endif -#ifndef CONFIG_VIDEO_MSP3400 +#ifdef CONFIG_VIDEO_MSP3400_MODULE hw = ivtv_request_module(itv, hw, "msp3400", IVTV_HW_MSP34XX); #endif -#ifndef CONFIG_VIDEO_VP27SMPX +#ifdef CONFIG_VIDEO_VP27SMPX_MODULE hw = ivtv_request_module(itv, hw, "vp27smpx", IVTV_HW_VP27SMPX); #endif -#ifndef CONFIG_VIDEO_WM8775 +#ifdef CONFIG_VIDEO_WM8775_MODULE hw = ivtv_request_module(itv, hw, "wm8775", IVTV_HW_WM8775); #endif -#ifndef CONFIG_VIDEO_WM8739 +#ifdef CONFIG_VIDEO_WM8739_MODULE hw = ivtv_request_module(itv, hw, "wm8739", IVTV_HW_WM8739); #endif -#ifndef CONFIG_VIDEO_CS53L32A +#ifdef CONFIG_VIDEO_CS53L32A_MODULE hw = ivtv_request_module(itv, hw, "cs53l32a", IVTV_HW_CS53L32A); #endif -#ifndef CONFIG_VIDEO_M52790 +#ifdef CONFIG_VIDEO_M52790_MODULE hw = ivtv_request_module(itv, hw, "m52790", IVTV_HW_M52790); #endif #endif -- cgit v1.2.3 From f056d29eebd2c8800cf42528ba0470c77a928821 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 31 Oct 2008 20:49:12 -0300 Subject: V4L/DVB (9510): cx18: Fix write retries for registers that always change - part 2. cx18: Fix write retries for registers that always change - part 2. Some registers, especially interrupt related ones, will never read back the value just written. Modified interrupt register readback checks to make sure the intended effect was achieved. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-io.c | 17 +++++++++++++++-- drivers/media/video/cx18/cx18-io.h | 17 +++++++++++++++++ drivers/media/video/cx18/cx18-irq.c | 19 +++++++++++-------- drivers/media/video/cx18/cx18-mailbox.c | 4 ++-- 4 files changed, 45 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c index 31be5e8684dc..220fae8d4ad7 100644 --- a/drivers/media/video/cx18/cx18-io.c +++ b/drivers/media/video/cx18/cx18-io.c @@ -88,6 +88,19 @@ void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr) cx18_log_write_retries(cx, i, addr); } +void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr, + u32 eval, u32 mask) +{ + int i; + eval &= mask; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_writel_noretry(cx, val, addr); + if (eval == (cx18_readl_noretry(cx, addr) & mask)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr) { int i; @@ -218,7 +231,7 @@ void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) void cx18_sw1_irq_enable(struct cx18 *cx, u32 val) { u32 r; - cx18_write_reg_noretry(cx, val, SW1_INT_STATUS); + cx18_write_reg_expect(cx, val, SW1_INT_STATUS, ~val, val); r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI); } @@ -233,7 +246,7 @@ void cx18_sw1_irq_disable(struct cx18 *cx, u32 val) void cx18_sw2_irq_enable(struct cx18 *cx, u32 val) { u32 r; - cx18_write_reg_noretry(cx, val, SW2_INT_STATUS); + cx18_write_reg_expect(cx, val, SW2_INT_STATUS, ~val, val); r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI); } diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h index 287a5e8bf67b..425244453ea7 100644 --- a/drivers/media/video/cx18/cx18-io.h +++ b/drivers/media/video/cx18/cx18-io.h @@ -133,6 +133,8 @@ static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr) cx18_writel_noretry(cx, val, addr); } +void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr, + u32 eval, u32 mask); static inline void cx18_writew_noretry(struct cx18 *cx, u16 val, void __iomem *addr) @@ -271,6 +273,21 @@ static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg) cx18_write_reg_noretry(cx, val, reg); } +static inline void _cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg, + u32 eval, u32 mask) +{ + _cx18_writel_expect(cx, val, cx->reg_mem + reg, eval, mask); +} + +static inline void cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg, + u32 eval, u32 mask) +{ + if (cx18_retry_mmio) + _cx18_write_reg_expect(cx, val, reg, eval, mask); + else + cx18_write_reg_noretry(cx, val, reg); +} + static inline u32 cx18_read_reg_noretry(struct cx18 *cx, u32 reg) { diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 447fc9c391ac..a366259bbb7b 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -142,16 +142,19 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) spin_lock(&cx->dma_reg_lock); - hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI); - hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask; - sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; - sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask; sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask; + sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; + sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask; + hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI); + hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask; - cx18_write_reg_noretry(cx, sw2&sw2_mask, SW2_INT_STATUS); - cx18_write_reg_noretry(cx, sw1&sw1_mask, SW1_INT_STATUS); - cx18_write_reg_noretry(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS); + if (sw1) + cx18_write_reg_expect(cx, sw1, SW1_INT_STATUS, ~sw1, sw1); + if (sw2) + cx18_write_reg_expect(cx, sw2, SW2_INT_STATUS, ~sw2, sw2); + if (hw2) + cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2); if (sw1 || sw2 || hw2) CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); @@ -178,5 +181,5 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) hpu_cmd(cx, sw1); spin_unlock(&cx->dma_reg_lock); - return (hw2 | sw1 | sw2) ? IRQ_HANDLED : IRQ_NONE; + return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE; } diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 87f7c8e2c181..851a905376bb 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -176,7 +176,7 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) cx18_setup_page(cx, SCB_OFFSET); cx18_write_sync(cx, mb->request, &ack_mb->ack); - cx18_write_reg_noretry(cx, ack_irq, SW2_INT_SET); + cx18_write_reg_expect(cx, ack_irq, SW2_INT_SET, ack_irq, ack_irq); return 0; } @@ -225,7 +225,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } if (info->flags & API_FAST) timeout /= 2; - cx18_write_reg_noretry(cx, irq, SW1_INT_SET); + cx18_write_reg_expect(cx, irq, SW1_INT_SET, irq, irq); while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request) && cnt < 660) { -- cgit v1.2.3 From 4e6b61047db2a77a250b6510bdb3c20c41aee591 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 1 Nov 2008 01:07:36 -0300 Subject: V4L/DVB (9511): cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API call cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API call. Give the encoder time to complete the MDL release before destroying the encoder internal task. This avoids an encoder lockup on the next digital capture and error messages about buffers being returned for an inactive encoder task handle. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-mailbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 851a905376bb..acff7dfb60df 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -83,7 +83,7 @@ static const struct cx18_api_info api_info[] = { API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK, 0), API_ENTRY(CPU, CX18_CPU_DE_SET_MDL, API_FAST), API_ENTRY(CPU, CX18_APU_RESETAI, API_FAST), - API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, 0), + API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, API_SLOW), API_ENTRY(0, 0, 0), }; -- cgit v1.2.3 From 891bd1331eb378f4a474d2377451a97bb306a451 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Tue, 4 Nov 2008 11:32:59 -0300 Subject: V4L/DVB (9524): af9013: fix bug in status reading - ! has a higher precedence than & Signed-off-by: Roel Kluin Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/af9013.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c index 21c1060cf10e..692b68a9e73b 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb/frontends/af9013.c @@ -1187,7 +1187,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) if (tmp) *status |= FE_HAS_SYNC | FE_HAS_LOCK; - if (!*status & FE_HAS_SIGNAL) { + if (!(*status & FE_HAS_SIGNAL)) { /* AGC lock */ ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp); if (ret) @@ -1196,7 +1196,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) *status |= FE_HAS_SIGNAL; } - if (!*status & FE_HAS_CARRIER) { + if (!(*status & FE_HAS_CARRIER)) { /* CFO lock */ ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp); if (ret) @@ -1205,7 +1205,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) *status |= FE_HAS_CARRIER; } - if (!*status & FE_HAS_CARRIER) { + if (!(*status & FE_HAS_CARRIER)) { /* SFOE lock */ ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp); if (ret) -- cgit v1.2.3 From 349d042f34cc2a663f22cae2390b240934e61014 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 5 Nov 2008 16:31:24 -0300 Subject: V4L/DVB (9527): af9015: fix compile warnings - use static to avoid compile warnings Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 14 +++++++------- drivers/media/dvb/dvb-usb/af9015.h | 1 - 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index cb0829c038ce..847d8fdd9ec4 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -31,13 +31,13 @@ #include "mc44s80x.h" #endif -int dvb_usb_af9015_debug; +static int dvb_usb_af9015_debug; module_param_named(debug, dvb_usb_af9015_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); -int dvb_usb_af9015_remote; +static int dvb_usb_af9015_remote; module_param_named(remote, dvb_usb_af9015_remote, int, 0644); MODULE_PARM_DESC(remote, "select remote"); -int dvb_usb_af9015_dual_mode; +static int dvb_usb_af9015_dual_mode; module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644); MODULE_PARM_DESC(dual_mode, "enable dual mode"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -46,7 +46,7 @@ static DEFINE_MUTEX(af9015_usb_mutex); static struct af9015_config af9015_config; static struct dvb_usb_device_properties af9015_properties[2]; -int af9015_properties_count = ARRAY_SIZE(af9015_properties); +static int af9015_properties_count = ARRAY_SIZE(af9015_properties); static struct af9013_config af9015_af9013_config[] = { { @@ -549,7 +549,7 @@ static int af9015_eeprom_dump(struct dvb_usb_device *d) return 0; } -int af9015_download_ir_table(struct dvb_usb_device *d) +static int af9015_download_ir_table(struct dvb_usb_device *d) { int i, packets = 0, ret; u16 addr = 0x9a56; /* ir-table start address */ @@ -999,7 +999,7 @@ static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state) } /* init 2nd I2C adapter */ -int af9015_i2c_init(struct dvb_usb_device *d) +static int af9015_i2c_init(struct dvb_usb_device *d) { int ret; struct af9015_state *state = d->priv; @@ -1419,7 +1419,7 @@ static int af9015_usb_probe(struct usb_interface *intf, return ret; } -void af9015_i2c_exit(struct dvb_usb_device *d) +static void af9015_i2c_exit(struct dvb_usb_device *d) { struct af9015_state *state = d->priv; deb_info("%s: \n", __func__); diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h index 882e8a4b3681..6c3c97293316 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -27,7 +27,6 @@ #define DVB_USB_LOG_PREFIX "af9015" #include "dvb-usb.h" -extern int dvb_usb_af9015_debug; #define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args) #define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args) #define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args) -- cgit v1.2.3 From 17ff61cb200e8ec0c8e456fbd426c1af63a6e28a Mon Sep 17 00:00:00 2001 From: Frederic CAND Date: Wed, 29 Oct 2008 14:37:49 -0300 Subject: V4L/DVB (9493): kconfig patch Ok I made a patch that converts gspca kconfig file to a more standard= one, with tabs + 2 white spaces, so that if a warning is added it still compiles please find it attached Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/Kconfig | 142 +++++++++++++++++++------------------- 1 file changed, 71 insertions(+), 71 deletions(-) diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 4d0817471c9f..96a16db3d7ae 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -3,16 +3,16 @@ menuconfig USB_GSPCA depends on VIDEO_V4L2 default m ---help--- - Say Y here if you want to enable selecting webcams based - on the GSPCA framework. + Say Y here if you want to enable selecting webcams based + on the GSPCA framework. - See for more info. + See for more info. - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" to use this driver. + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. - To compile this driver as modules, choose M here: the - modules will be called gspca_main. + To compile this driver as modules, choose M here: the + modules will be called gspca_main. if USB_GSPCA && VIDEO_V4L2 @@ -23,190 +23,190 @@ config USB_GSPCA_CONEX tristate "Conexant Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Conexant chip. + Say Y here if you want support for cameras based on the Conexant chip. - To compile this driver as a module, choose M here: the - module will be called gspca_conex. + To compile this driver as a module, choose M here: the + module will be called gspca_conex. config USB_GSPCA_ETOMS tristate "Etoms USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Etoms chip. + Say Y here if you want support for cameras based on the Etoms chip. - To compile this driver as a module, choose M here: the - module will be called gspca_etoms. + To compile this driver as a module, choose M here: the + module will be called gspca_etoms. config USB_GSPCA_FINEPIX tristate "Fujifilm FinePix USB V4L2 driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the FinePix chip. + Say Y here if you want support for cameras based on the FinePix chip. - To compile this driver as a module, choose M here: the - module will be called gspca_finepix. + To compile this driver as a module, choose M here: the + module will be called gspca_finepix. config USB_GSPCA_MARS tristate "Mars USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Mars chip. + Say Y here if you want support for cameras based on the Mars chip. - To compile this driver as a module, choose M here: the - module will be called gspca_mars. + To compile this driver as a module, choose M here: the + module will be called gspca_mars. config USB_GSPCA_OV519 tristate "OV519 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the OV519 chip. + Say Y here if you want support for cameras based on the OV519 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_ov519. + To compile this driver as a module, choose M here: the + module will be called gspca_ov519. config USB_GSPCA_PAC207 tristate "Pixart PAC207 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the PAC207 chip. + Say Y here if you want support for cameras based on the PAC207 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_pac207. + To compile this driver as a module, choose M here: the + module will be called gspca_pac207. config USB_GSPCA_PAC7311 tristate "Pixart PAC7311 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the PAC7311 chip. + Say Y here if you want support for cameras based on the PAC7311 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_pac7311. + To compile this driver as a module, choose M here: the + module will be called gspca_pac7311. config USB_GSPCA_SONIXB tristate "SN9C102 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SONIXB chip. + Say Y here if you want support for cameras based on the SONIXB chip. - To compile this driver as a module, choose M here: the - module will be called gspca_sonixb. + To compile this driver as a module, choose M here: the + module will be called gspca_sonixb. config USB_GSPCA_SONIXJ tristate "SONIX JPEG USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SONIXJ chip. + Say Y here if you want support for cameras based on the SONIXJ chip. - To compile this driver as a module, choose M here: the - module will be called gspca_sonixj + To compile this driver as a module, choose M here: the + module will be called gspca_sonixj config USB_GSPCA_SPCA500 tristate "SPCA500 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA500 chip. + Say Y here if you want support for cameras based on the SPCA500 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca500. + To compile this driver as a module, choose M here: the + module will be called gspca_spca500. config USB_GSPCA_SPCA501 tristate "SPCA501 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA501 chip. + Say Y here if you want support for cameras based on the SPCA501 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca501. + To compile this driver as a module, choose M here: the + module will be called gspca_spca501. config USB_GSPCA_SPCA505 tristate "SPCA505 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA505 chip. + Say Y here if you want support for cameras based on the SPCA505 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca505. + To compile this driver as a module, choose M here: the + module will be called gspca_spca505. config USB_GSPCA_SPCA506 tristate "SPCA506 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA506 chip. + Say Y here if you want support for cameras based on the SPCA506 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca506. + To compile this driver as a module, choose M here: the + module will be called gspca_spca506. config USB_GSPCA_SPCA508 tristate "SPCA508 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA508 chip. + Say Y here if you want support for cameras based on the SPCA508 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca508. + To compile this driver as a module, choose M here: the + module will be called gspca_spca508. config USB_GSPCA_SPCA561 tristate "SPCA561 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA561 chip. + Say Y here if you want support for cameras based on the SPCA561 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca561. + To compile this driver as a module, choose M here: the + module will be called gspca_spca561. config USB_GSPCA_STK014 tristate "Syntek DV4000 (STK014) USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the STK014 chip. + Say Y here if you want support for cameras based on the STK014 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_stk014. + To compile this driver as a module, choose M here: the + module will be called gspca_stk014. config USB_GSPCA_SUNPLUS tristate "SUNPLUS USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Sunplus - SPCA504(abc) SPCA533 SPCA536 chips. + Say Y here if you want support for cameras based on the Sunplus + SPCA504(abc) SPCA533 SPCA536 chips. - To compile this driver as a module, choose M here: the - module will be called gspca_spca5xx. + To compile this driver as a module, choose M here: the + module will be called gspca_spca5xx. config USB_GSPCA_T613 tristate "T613 (JPEG Compliance) USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the T613 chip. + Say Y here if you want support for cameras based on the T613 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_t613. + To compile this driver as a module, choose M here: the + module will be called gspca_t613. config USB_GSPCA_TV8532 tristate "TV8532 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the TV8531 chip. + Say Y here if you want support for cameras based on the TV8531 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_tv8532. + To compile this driver as a module, choose M here: the + module will be called gspca_tv8532. config USB_GSPCA_VC032X tristate "VC032X USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the VC032X chip. + Say Y here if you want support for cameras based on the VC032X chip. - To compile this driver as a module, choose M here: the - module will be called gspca_vc032x. + To compile this driver as a module, choose M here: the + module will be called gspca_vc032x. config USB_GSPCA_ZC3XX tristate "VC3xx USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the ZC3XX chip. + Say Y here if you want support for cameras based on the ZC3XX chip. - To compile this driver as a module, choose M here: the - module will be called gspca_zc3xx. + To compile this driver as a module, choose M here: the + module will be called gspca_zc3xx. endif -- cgit v1.2.3 From 465f8a805d3796fac2b2fb0c630217f6f76e667c Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Tue, 4 Nov 2008 22:02:23 -0300 Subject: V4L/DVB (9515): cx18: Use correct Mailbox IRQ Ack values and misc IRQ handling cleanup cx18: Use correct Mailbox IRQ Ack values and misc IRQ handling cleanup. The SCB field definitions for Ack IRQ's for mailboxes were inconsistent with the bitmasks being loaded into those SCB fields and the SW2 Ack IRQ handling logic. Renamed fields in SCB to make things consistent and did misc IRQ handling cleanups: removing legacy ivtv dma_reg_lock, HPU IRQ flags, etc. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.c | 1 - drivers/media/video/cx18/cx18-driver.h | 2 -- drivers/media/video/cx18/cx18-irq.c | 54 ++++++++++++++++++---------------- drivers/media/video/cx18/cx18-scb.h | 40 ++++++++++++------------- 4 files changed, 49 insertions(+), 48 deletions(-) diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 6a840f2d81a0..2befa3819cdb 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -448,7 +448,6 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) mutex_init(&cx->gpio_lock); spin_lock_init(&cx->lock); - spin_lock_init(&cx->dma_reg_lock); /* start counting open_id at 1 */ cx->open_id = 1; diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index a4b1708fafe7..e721c01d2178 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -402,8 +402,6 @@ struct cx18 { spinlock_t lock; /* lock access to this struct */ int search_pack_header; - spinlock_t dma_reg_lock; /* lock access to DMA engine registers */ - int open_id; /* incremented each time an open occurs, used as unique ID. Starts at 1, so 0 can be used as uninitialized value in the stream->id. */ diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index a366259bbb7b..c306e142c1c3 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -30,8 +30,6 @@ #include "cx18-vbi.h" #include "cx18-scb.h" -#define DMA_MAGIC_COOKIE 0x000001fe - static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) { u32 handle = mb->args[0]; @@ -109,7 +107,7 @@ static void epu_debug(struct cx18 *cx, struct cx18_mailbox *mb) CX18_INFO("FW version: %s\n", p - 1); } -static void hpu_cmd(struct cx18 *cx, u32 sw1) +static void epu_cmd(struct cx18 *cx, u32 sw1) { struct cx18_mailbox mb; @@ -125,12 +123,31 @@ static void hpu_cmd(struct cx18 *cx, u32 sw1) epu_debug(cx, &mb); break; default: - CX18_WARN("Unexpected mailbox command %08x\n", mb.cmd); + CX18_WARN("Unknown CPU_TO_EPU mailbox command %#08x\n", + mb.cmd); break; } } - if (sw1 & (IRQ_APU_TO_EPU | IRQ_HPU_TO_EPU)) - CX18_WARN("Unexpected interrupt %08x\n", sw1); + + if (sw1 & IRQ_APU_TO_EPU) { + cx18_memcpy_fromio(cx, &mb, &cx->scb->apu2epu_mb, sizeof(mb)); + CX18_WARN("Unknown APU_TO_EPU mailbox command %#08x\n", mb.cmd); + } + + if (sw1 & IRQ_HPU_TO_EPU) { + cx18_memcpy_fromio(cx, &mb, &cx->scb->hpu2epu_mb, sizeof(mb)); + CX18_WARN("Unknown HPU_TO_EPU mailbox command %#08x\n", mb.cmd); + } +} + +static void xpu_ack(struct cx18 *cx, u32 sw2) +{ + if (sw2 & IRQ_CPU_TO_EPU_ACK) + wake_up(&cx->mb_cpu_waitq); + if (sw2 & IRQ_APU_TO_EPU_ACK) + wake_up(&cx->mb_apu_waitq); + if (sw2 & IRQ_HPU_TO_EPU_ACK) + wake_up(&cx->mb_hpu_waitq); } irqreturn_t cx18_irq_handler(int irq, void *dev_id) @@ -140,11 +157,9 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) u32 sw2, sw2_mask; u32 hw2, hw2_mask; - spin_lock(&cx->dma_reg_lock); - - sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; + sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask; - sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; + sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask; hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI); hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask; @@ -160,26 +175,15 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); /* To do: interrupt-based I2C handling - if (hw2 & 0x00c00000) { + if (hw2 & (HW2_I2C1_INT|HW2_I2C2_INT)) { } */ - if (sw2) { - if (sw2 & (cx18_readl(cx, &cx->scb->cpu2hpu_irq_ack) | - cx18_readl(cx, &cx->scb->cpu2epu_irq_ack))) - wake_up(&cx->mb_cpu_waitq); - if (sw2 & (cx18_readl(cx, &cx->scb->apu2hpu_irq_ack) | - cx18_readl(cx, &cx->scb->apu2epu_irq_ack))) - wake_up(&cx->mb_apu_waitq); - if (sw2 & cx18_readl(cx, &cx->scb->epu2hpu_irq_ack)) - wake_up(&cx->mb_epu_waitq); - if (sw2 & cx18_readl(cx, &cx->scb->hpu2epu_irq_ack)) - wake_up(&cx->mb_hpu_waitq); - } + if (sw2) + xpu_ack(cx, sw2); if (sw1) - hpu_cmd(cx, sw1); - spin_unlock(&cx->dma_reg_lock); + epu_cmd(cx, sw1); return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE; } diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/video/cx18/cx18-scb.h index 86b4cb15d163..594713bbed68 100644 --- a/drivers/media/video/cx18/cx18-scb.h +++ b/drivers/media/video/cx18/cx18-scb.h @@ -128,22 +128,22 @@ struct cx18_scb { u32 apu2cpu_irq; /* Value to write to register SW2 register set (0xC7003140) after the command is cleared */ - u32 apu2cpu_irq_ack; + u32 cpu2apu_irq_ack; u32 reserved2[13]; u32 hpu2cpu_mb_offset; u32 hpu2cpu_irq; - u32 hpu2cpu_irq_ack; + u32 cpu2hpu_irq_ack; u32 reserved3[13]; u32 ppu2cpu_mb_offset; u32 ppu2cpu_irq; - u32 ppu2cpu_irq_ack; + u32 cpu2ppu_irq_ack; u32 reserved4[13]; u32 epu2cpu_mb_offset; u32 epu2cpu_irq; - u32 epu2cpu_irq_ack; + u32 cpu2epu_irq_ack; u32 reserved5[13]; u32 reserved6[8]; @@ -153,22 +153,22 @@ struct cx18_scb { u32 reserved11[7]; u32 cpu2apu_mb_offset; u32 cpu2apu_irq; - u32 cpu2apu_irq_ack; + u32 apu2cpu_irq_ack; u32 reserved12[13]; u32 hpu2apu_mb_offset; u32 hpu2apu_irq; - u32 hpu2apu_irq_ack; + u32 apu2hpu_irq_ack; u32 reserved13[13]; u32 ppu2apu_mb_offset; u32 ppu2apu_irq; - u32 ppu2apu_irq_ack; + u32 apu2ppu_irq_ack; u32 reserved14[13]; u32 epu2apu_mb_offset; u32 epu2apu_irq; - u32 epu2apu_irq_ack; + u32 apu2epu_irq_ack; u32 reserved15[13]; u32 reserved16[8]; @@ -178,22 +178,22 @@ struct cx18_scb { u32 reserved21[7]; u32 cpu2hpu_mb_offset; u32 cpu2hpu_irq; - u32 cpu2hpu_irq_ack; + u32 hpu2cpu_irq_ack; u32 reserved22[13]; u32 apu2hpu_mb_offset; u32 apu2hpu_irq; - u32 apu2hpu_irq_ack; + u32 hpu2apu_irq_ack; u32 reserved23[13]; u32 ppu2hpu_mb_offset; u32 ppu2hpu_irq; - u32 ppu2hpu_irq_ack; + u32 hpu2ppu_irq_ack; u32 reserved24[13]; u32 epu2hpu_mb_offset; u32 epu2hpu_irq; - u32 epu2hpu_irq_ack; + u32 hpu2epu_irq_ack; u32 reserved25[13]; u32 reserved26[8]; @@ -203,22 +203,22 @@ struct cx18_scb { u32 reserved31[7]; u32 cpu2ppu_mb_offset; u32 cpu2ppu_irq; - u32 cpu2ppu_irq_ack; + u32 ppu2cpu_irq_ack; u32 reserved32[13]; u32 apu2ppu_mb_offset; u32 apu2ppu_irq; - u32 apu2ppu_irq_ack; + u32 ppu2apu_irq_ack; u32 reserved33[13]; u32 hpu2ppu_mb_offset; u32 hpu2ppu_irq; - u32 hpu2ppu_irq_ack; + u32 ppu2hpu_irq_ack; u32 reserved34[13]; u32 epu2ppu_mb_offset; u32 epu2ppu_irq; - u32 epu2ppu_irq_ack; + u32 ppu2epu_irq_ack; u32 reserved35[13]; u32 reserved36[8]; @@ -228,22 +228,22 @@ struct cx18_scb { u32 reserved41[7]; u32 cpu2epu_mb_offset; u32 cpu2epu_irq; - u32 cpu2epu_irq_ack; + u32 epu2cpu_irq_ack; u32 reserved42[13]; u32 apu2epu_mb_offset; u32 apu2epu_irq; - u32 apu2epu_irq_ack; + u32 epu2apu_irq_ack; u32 reserved43[13]; u32 hpu2epu_mb_offset; u32 hpu2epu_irq; - u32 hpu2epu_irq_ack; + u32 epu2hpu_irq_ack; u32 reserved44[13]; u32 ppu2epu_mb_offset; u32 ppu2epu_irq; - u32 ppu2epu_irq_ack; + u32 epu2ppu_irq_ack; u32 reserved45[13]; u32 reserved46[8]; -- cgit v1.2.3 From 93d0f0385adafc331d070a4e874c8ae686e6179a Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sat, 25 Oct 2008 05:06:58 -0300 Subject: V4L/DVB (9549): gspca: Fix a typo in one of gspca chips name. Signed-off-by: Krzysztof Helt Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 96a16db3d7ae..6b557c057fac 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -201,7 +201,7 @@ config USB_GSPCA_VC032X module will be called gspca_vc032x. config USB_GSPCA_ZC3XX - tristate "VC3xx USB Camera Driver" + tristate "ZC3XX USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help Say Y here if you want support for cameras based on the ZC3XX chip. -- cgit v1.2.3 From 03bf75654cd31610ddd1ea66fab311b5b24700f0 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Thu, 6 Nov 2008 14:47:13 -0300 Subject: V4L/DVB (9556): gspca: Bad init sequence for sensor HV7131B in zc3xx. This patch fixes the H flip and the R & B color inversion of mode 320x240. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/zc3xx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index d0a4451dc46f..3e594462b163 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -2266,7 +2266,7 @@ static const struct usb_action hdcs2020b_NoFliker[] = { {} }; -static const struct usb_action hv7131bxx_Initial[] = { +static const struct usb_action hv7131bxx_Initial[] = { /* 320x240 */ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, {0xa0, 0x10, ZC3XX_R002_CLOCKSELECT}, {0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT}, @@ -2309,7 +2309,7 @@ static const struct usb_action hv7131bxx_Initial[] = { {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05}, {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS}, - {0xaa, 0x02, 0x0080}, /* {0xaa, 0x02, 0x0090}; */ + {0xaa, 0x02, 0x0090}, /* {0xaa, 0x02, 0x0080}; */ {0xa1, 0x01, 0x0002}, {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT}, {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND}, @@ -2374,7 +2374,7 @@ static const struct usb_action hv7131bxx_Initial[] = { {} }; -static const struct usb_action hv7131bxx_InitialScale[] = { +static const struct usb_action hv7131bxx_InitialScale[] = { /* 640x480*/ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT}, {0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT}, -- cgit v1.2.3 From c9ff1b689a5d605640f098afc37d6102ecef9876 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Thu, 6 Nov 2008 15:29:47 -0300 Subject: V4L/DVB (9557): gspca: Small changes for the sensor HV7131B in zc3xx. - touch only one register for brightness change - no quality control - don't probe again at streamon time. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/zc3xx.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 3e594462b163..8b3101d347c3 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -2290,7 +2290,7 @@ static const struct usb_action hv7131bxx_Initial[] = { /* 320x240 */ {0xaa, 0x14, 0x0001}, {0xaa, 0x15, 0x00e8}, {0xaa, 0x16, 0x0002}, - {0xaa, 0x17, 0x0086}, + {0xaa, 0x17, 0x0086}, /* 00,17,88,aa */ {0xaa, 0x31, 0x0038}, {0xaa, 0x32, 0x0038}, {0xaa, 0x33, 0x0038}, @@ -2309,7 +2309,7 @@ static const struct usb_action hv7131bxx_Initial[] = { /* 320x240 */ {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05}, {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS}, - {0xaa, 0x02, 0x0090}, /* {0xaa, 0x02, 0x0080}; */ + {0xaa, 0x02, 0x0090}, /* 00,02,80,aa */ {0xa1, 0x01, 0x0002}, {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT}, {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND}, @@ -6388,6 +6388,8 @@ static void setbrightness(struct gspca_dev *gspca_dev) /*fixme: is it really write to 011d and 018d for all other sensors? */ brightness = sd->brightness; reg_w(gspca_dev->dev, brightness, 0x011d); + if (sd->sensor == SENSOR_HV7131B) + return; if (brightness < 0x70) brightness += 0x10; else @@ -6529,6 +6531,7 @@ static void setquality(struct gspca_dev *gspca_dev) switch (sd->sensor) { case SENSOR_GC0305: + case SENSOR_HV7131B: case SENSOR_OV7620: case SENSOR_PO2030: return; @@ -7209,7 +7212,6 @@ static int sd_start(struct gspca_dev *gspca_dev) mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; zc3_init = init_tb[(int) sd->sensor][mode]; switch (sd->sensor) { - case SENSOR_HV7131B: case SENSOR_HV7131C: zcxx_probeSensor(gspca_dev); break; -- cgit v1.2.3 From 1d6782bda5c1fb2bca44af50647b45427d8ef4ec Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Wed, 5 Nov 2008 00:49:14 -0300 Subject: V4L/DVB (9516): cx18: Move DVB buffer transfer handling from irq handler to work_queue cx18: Move DVB buffer transfer handling from irq handler to work_queue thread. In order to properly lock the epu2cpu mailbox for driver to CX23418 commands, the DVB/TS buffer handling needs to be moved from the IRQ handler and IRQ context to a work queue. This work_queue implmentation is strikingly similar to the ivtv implementation - for better or worse. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.c | 12 ++++++++++++ drivers/media/video/cx18/cx18-driver.h | 18 ++++++++++++------ drivers/media/video/cx18/cx18-dvb.c | 23 +++++++++++++++++++++++ drivers/media/video/cx18/cx18-dvb.h | 1 + drivers/media/video/cx18/cx18-irq.c | 29 ++++++++++++++++++++--------- drivers/media/video/cx18/cx18-irq.h | 4 +--- drivers/media/video/cx18/cx18-queue.c | 14 ++++++-------- 7 files changed, 75 insertions(+), 26 deletions(-) diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 2befa3819cdb..7874d9790a51 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -449,6 +449,14 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) spin_lock_init(&cx->lock); + cx->work_queue = create_singlethread_workqueue(cx->name); + if (cx->work_queue == NULL) { + CX18_ERR("Could not create work queue\n"); + return -1; + } + + INIT_WORK(&cx->work, cx18_work_handler); + /* start counting open_id at 1 */ cx->open_id = 1; @@ -831,6 +839,7 @@ free_map: free_mem: release_mem_region(cx->base_addr, CX18_MEM_SIZE); free_workqueue: + destroy_workqueue(cx->work_queue); err: if (retval == 0) retval = -ENODEV; @@ -931,6 +940,9 @@ static void cx18_remove(struct pci_dev *pci_dev) cx18_halt_firmware(cx); + flush_workqueue(cx->work_queue); + destroy_workqueue(cx->work_queue); + cx18_streams_cleanup(cx, 1); exit_cx18_i2c(cx); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index e721c01d2178..bbdd5f25041d 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -199,12 +199,15 @@ struct cx18_options { #define CX18_F_S_APPL_IO 8 /* this stream is used read/written by an application */ /* per-cx18, i_flags */ -#define CX18_F_I_LOADED_FW 0 /* Loaded the firmware the first time */ -#define CX18_F_I_EOS 4 /* End of encoder stream reached */ -#define CX18_F_I_RADIO_USER 5 /* The radio tuner is selected */ -#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */ -#define CX18_F_I_INITED 21 /* set after first open */ -#define CX18_F_I_FAILED 22 /* set if first open failed */ +#define CX18_F_I_LOADED_FW 0 /* Loaded firmware 1st time */ +#define CX18_F_I_EOS 4 /* End of encoder stream */ +#define CX18_F_I_RADIO_USER 5 /* radio tuner is selected */ +#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */ +#define CX18_F_I_HAVE_WORK 15 /* there is work to be done */ +#define CX18_F_I_WORK_HANDLER_DVB 18 /* work to be done for DVB */ +#define CX18_F_I_INITED 21 /* set after first open */ +#define CX18_F_I_FAILED 22 /* set if first open failed */ +#define CX18_F_I_WORK_INITED 23 /* worker thread initialized */ /* These are the VBI types as they appear in the embedded VBI private packets. */ #define CX18_SLICED_TYPE_TELETEXT_B (1) @@ -431,6 +434,9 @@ struct cx18 { /* when the current DMA is finished this queue is woken up */ wait_queue_head_t dma_waitq; + struct workqueue_struct *work_queue; + struct work_struct work; + /* i2c */ struct i2c_adapter i2c_adap[2]; struct i2c_algo_bit_data i2c_algo[2]; diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index afc694e7bdb2..4542e2e5e3d7 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -23,6 +23,8 @@ #include "cx18-dvb.h" #include "cx18-io.h" #include "cx18-streams.h" +#include "cx18-queue.h" +#include "cx18-scb.h" #include "cx18-cards.h" #include "s5h1409.h" #include "mxl5005s.h" @@ -300,3 +302,24 @@ static int dvb_register(struct cx18_stream *stream) return ret; } + +void cx18_dvb_work_handler(struct cx18 *cx) +{ + struct cx18_buffer *buf; + struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_TS]; + + while ((buf = cx18_dequeue(s, &s->q_full)) != NULL) { + if (s->dvb.enabled) + dvb_dmx_swfilter(&s->dvb.demux, buf->buf, + buf->bytesused); + + cx18_enqueue(s, buf, &s->q_free); + cx18_buf_sync_for_device(s, buf); + if (s->handle == CX18_INVALID_TASK_HANDLE) /* FIXME: improve */ + continue; + + cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + 1, buf->id, s->buf_size); + } +} diff --git a/drivers/media/video/cx18/cx18-dvb.h b/drivers/media/video/cx18/cx18-dvb.h index bf8d8f6f5455..bbdcefc87f28 100644 --- a/drivers/media/video/cx18/cx18-dvb.h +++ b/drivers/media/video/cx18/cx18-dvb.h @@ -23,3 +23,4 @@ int cx18_dvb_register(struct cx18_stream *stream); void cx18_dvb_unregister(struct cx18_stream *stream); +void cx18_dvb_work_handler(struct cx18 *cx); diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index c306e142c1c3..5fbfbd0f1493 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -29,6 +29,20 @@ #include "cx18-mailbox.h" #include "cx18-vbi.h" #include "cx18-scb.h" +#include "cx18-dvb.h" + +void cx18_work_handler(struct work_struct *work) +{ + struct cx18 *cx = container_of(work, struct cx18, work); + if (test_and_clear_bit(CX18_F_I_WORK_INITED, &cx->i_flags)) { + struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 }; + /* This thread must use the FIFO scheduler as it + * is realtime sensitive. */ + sched_setscheduler(current, SCHED_FIFO, ¶m); + } + if (test_and_clear_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags)) + cx18_dvb_work_handler(cx); +} static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) { @@ -65,17 +79,11 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) if (buf) { cx18_buf_sync_for_cpu(s, buf); if (s->type == CX18_ENC_STREAM_TYPE_TS && s->dvb.enabled) { - /* process the buffer here */ - CX18_DEBUG_HI_DMA("TS recv and sent bytesused=%d\n", + CX18_DEBUG_HI_DMA("TS recv bytesused = %d\n", buf->bytesused); - dvb_dmx_swfilter(&s->dvb.demux, buf->buf, - buf->bytesused); - - cx18_buf_sync_for_device(s, buf); - cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, - 1, buf->id, s->buf_size); + set_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags); + set_bit(CX18_F_I_HAVE_WORK, &cx->i_flags); } else set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags); } else { @@ -185,5 +193,8 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) if (sw1) epu_cmd(cx, sw1); + if (test_and_clear_bit(CX18_F_I_HAVE_WORK, &cx->i_flags)) + queue_work(cx->work_queue, &cx->work); + return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE; } diff --git a/drivers/media/video/cx18/cx18-irq.h b/drivers/media/video/cx18/cx18-irq.h index 379f704f5cba..6173ca3bc9e4 100644 --- a/drivers/media/video/cx18/cx18-irq.h +++ b/drivers/media/video/cx18/cx18-irq.h @@ -32,6 +32,4 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id); -void cx18_irq_work_handler(struct work_struct *work); -void cx18_dma_stream_dec_prepare(struct cx18_stream *s, u32 offset, int lock); -void cx18_unfinished_dma(unsigned long arg); +void cx18_work_handler(struct work_struct *work); diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index a33ba04a2686..174682c2582f 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -88,15 +88,13 @@ struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id, if (buf->id != id) continue; + buf->bytesused = bytesused; - /* the transport buffers are handled differently, - they are not moved to the full queue */ - if (s->type != CX18_ENC_STREAM_TYPE_TS) { - atomic_dec(&s->q_free.buffers); - atomic_inc(&s->q_full.buffers); - s->q_full.bytesused += buf->bytesused; - list_move_tail(&buf->list, &s->q_full.list); - } + atomic_dec(&s->q_free.buffers); + atomic_inc(&s->q_full.buffers); + s->q_full.bytesused += buf->bytesused; + list_move_tail(&buf->list, &s->q_full.list); + spin_unlock(&s->qlock); return buf; } -- cgit v1.2.3 From 2002c69595a092518107f7e3c1294c9710bc92ae Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 11 Nov 2008 11:52:33 +0100 Subject: sched: release buddies on yield Clear buddies on yield, so that the buddy rules don't schedule them despite them being placed right-most. This fixed a performance regression with yield-happy binary JVMs. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar Tested-by: Lin Ming --- kernel/sched_fair.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 51aa3e102acb..98345e45b059 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -716,6 +716,15 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup) __enqueue_entity(cfs_rq, se); } +static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se) +{ + if (cfs_rq->last == se) + cfs_rq->last = NULL; + + if (cfs_rq->next == se) + cfs_rq->next = NULL; +} + static void dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) { @@ -738,11 +747,7 @@ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) #endif } - if (cfs_rq->last == se) - cfs_rq->last = NULL; - - if (cfs_rq->next == se) - cfs_rq->next = NULL; + clear_buddies(cfs_rq, se); if (se != cfs_rq->curr) __dequeue_entity(cfs_rq, se); @@ -977,6 +982,8 @@ static void yield_task_fair(struct rq *rq) if (unlikely(cfs_rq->nr_running == 1)) return; + clear_buddies(cfs_rq, se); + if (likely(!sysctl_sched_compat_yield) && curr->policy != SCHED_BATCH) { update_rq_clock(rq); /* -- cgit v1.2.3 From 6cd10f8db385ba547811baa5b26f672fdff232e6 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 9 Nov 2008 11:53:14 -0600 Subject: x86, voyager: fix smp generic helper voyager breakage Impact: build/boot fix for x86/Voyager This change: | commit 3d4422332711ef48ef0f132f1fcbfcbd56c7f3d1 | Author: Jens Axboe | Date: Thu Jun 26 11:21:34 2008 +0200 | | Add generic helpers for arch IPI function calls didn't wire up the voyager smp call function correctly, so do that here. Also make CONFIG_USE_GENERIC_SMP_HELPERS a def_bool y again, since we now use the generic helpers for every x86 architecture. Signed-off-by: James Bottomley Cc: Jens Axboe Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 5 ++++- arch/x86/mach-voyager/voyager_smp.c | 16 ++++++++++++++-- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4cf0ab13d187..ac22bb7719f7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -167,9 +167,12 @@ config GENERIC_PENDING_IRQ config X86_SMP bool depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64) - select USE_GENERIC_SMP_HELPERS default y +config USE_GENERIC_SMP_HELPERS + def_bool y + depends on SMP + config X86_32_SMP def_bool y depends on X86_32 && SMP diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 0e331652681e..52145007bd7e 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -7,6 +7,7 @@ * This file provides all the same external entries as smp.c but uses * the voyager hal to provide the functionality */ +#include #include #include #include @@ -1790,6 +1791,17 @@ void __init smp_setup_processor_id(void) x86_write_percpu(cpu_number, hard_smp_processor_id()); } +static void voyager_send_call_func(cpumask_t callmask) +{ + __u32 mask = cpus_addr(callmask)[0] & ~(1 << smp_processor_id()); + send_CPI(mask, VIC_CALL_FUNCTION_CPI); +} + +static void voyager_send_call_func_single(int cpu) +{ + send_CPI(1 << cpu, VIC_CALL_FUNCTION_SINGLE_CPI); +} + struct smp_ops smp_ops = { .smp_prepare_boot_cpu = voyager_smp_prepare_boot_cpu, .smp_prepare_cpus = voyager_smp_prepare_cpus, @@ -1799,6 +1811,6 @@ struct smp_ops smp_ops = { .smp_send_stop = voyager_smp_send_stop, .smp_send_reschedule = voyager_smp_send_reschedule, - .send_call_func_ipi = native_send_call_func_ipi, - .send_call_func_single_ipi = native_send_call_func_single_ipi, + .send_call_func_ipi = voyager_send_call_func, + .send_call_func_single_ipi = voyager_send_call_func_single, }; -- cgit v1.2.3 From 1ec26db1f8cae0aca64708e0fe1f687eab7c82e5 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 11 Nov 2008 21:45:57 +0800 Subject: pxafb: introduce LCD_TYPE_MASK and use it. Signed-off-by: Daniel Mack Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/pxafb.h | 1 + drivers/video/pxafb.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 8e591118371e..cbda4d35c421 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -33,6 +33,7 @@ #define LCD_CONN_TYPE(_x) ((_x) & 0x0f) #define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) +#define LCD_TYPE_MASK 0xf #define LCD_TYPE_UNKNOWN 0 #define LCD_TYPE_MONO_STN 1 #define LCD_TYPE_MONO_DSTN 2 diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 97204497d9f7..64990592dc58 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1372,7 +1372,7 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi, fbi->cmap_inverse = inf->cmap_inverse; fbi->cmap_static = inf->cmap_static; - switch (lcd_conn & 0xf) { + switch (lcd_conn & LCD_TYPE_MASK) { case LCD_TYPE_MONO_STN: fbi->lccr0 = LCCR0_CMS; break; -- cgit v1.2.3 From 6cc4abe43e9362034881ad8c005f4ab8a684ae3e Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 11 Nov 2008 21:47:07 +0800 Subject: pxafb: only initialize the smart panel thread when dealing with a smartpanel Signed-off-by: Daniel Mack Signed-off-by: Eric Miao --- drivers/video/pxafb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 64990592dc58..cc59c52e1103 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -804,6 +804,9 @@ static int pxafb_smart_thread(void *arg) static int pxafb_smart_init(struct pxafb_info *fbi) { + if (!(fbi->lccr0 | LCCR0_LCDT)) + return 0; + fbi->smart_thread = kthread_run(pxafb_smart_thread, fbi, "lcd_refresh"); if (IS_ERR(fbi->smart_thread)) { -- cgit v1.2.3 From 355a0ec471377a8a907b79c8fba3f0f09b44656e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 11 Nov 2008 16:46:19 +0100 Subject: ALSA: hda - Add missing analog-mux mixer creation for STAC9200 The creation of analog-mux mixer element is missing in patch_stac9200() due to the dynamic allocation patch. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index e6085915d86d..1627756e5c7d 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3530,6 +3530,12 @@ static int stac9200_parse_auto_config(struct hda_codec *codec) if ((err = stac9200_auto_create_lfe_ctls(codec, &spec->autocfg)) < 0) return err; + if (spec->num_muxes > 0) { + err = stac92xx_auto_create_mux_input_ctls(codec); + if (err < 0) + return err; + } + if (spec->autocfg.dig_out_pin) spec->multiout.dig_out_nid = 0x05; if (spec->autocfg.dig_in_pin) -- cgit v1.2.3 From 786b11cc0f505e44c29f778fd329dafafafed76c Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Tue, 11 Nov 2008 09:37:14 -0500 Subject: Input: i8042 - add Dell XPS M1530 to nomux list Dell XPS M1530 needs i8042.nomux=1 for ALPS touchpad to work as reported on https://qa.mandriva.com/show_bug.cgi?id=43532 It is said that before A08 bios version this isn't needed (I don't have the hardware so can't check), and suppose this will not break with bios versions before A08. Signed-off-by: Herton Ronaldo Krzesinski Tested-by: Andreas Ericsson Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index eec375cd10e6..5db1d0b7456e 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -337,6 +337,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "2656"), }, }, + { + .ident = "Dell XPS M1530", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"), + }, + }, { } }; -- cgit v1.2.3 From a8215b81cc31cf267506bc6a4a4bfe93f4ca1652 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 11 Nov 2008 09:40:42 -0500 Subject: Input: atkbd - add keymap quirk for Inventec Symphony systems The Zepto 6615WD laptop (rebranded Inventec Symphony system) needs a key release quirk for its volume keys to work. The attached patch adds the quirk to the atkbd driver. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=460237 Signed-off-by: Matthew Garrett Signed-off-by: Adel Gadllah Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 22016ca15351..c93b9b4ff03a 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -867,6 +867,22 @@ static void atkbd_hp_keymap_fixup(struct atkbd *atkbd) atkbd->force_release_mask); } +/* + * Inventec system with broken key release on volume keys + */ +static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd) +{ + const unsigned int forced_release_keys[] = { + 0xae, 0xb0, + }; + int i; + + if (atkbd->set == 2) + for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) + __set_bit(forced_release_keys[i], + atkbd->force_release_mask); +} + /* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set @@ -1468,6 +1484,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_fixup, .driver_data = atkbd_hp_keymap_fixup, }, + { + .ident = "Inventec Symphony", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), + DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), + }, + .callback = atkbd_setup_fixup, + .driver_data = atkbd_inventec_keymap_fixup, + }, { } }; -- cgit v1.2.3 From d6d79a785d430c0e17f7e2d662f10de022cbca93 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 11 Nov 2008 09:43:21 -0500 Subject: Input: atkbd - cancel delayed work before freeing its structure Pointed out by Oleg Nesterov. Since delayed work is used here, use of flush_scheduled_work() is not sufficient in atkbd_disconnect(). It does not wait for scheduled delayed work to finish. This patch prevents delayed work to be processed after freeing atkbd structure (used struct delayed_work is part of atkbd) by cancelling this delayed work. Signed-off-by: Jiri Pirko Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index c93b9b4ff03a..379b7ff354ec 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -824,7 +824,7 @@ static void atkbd_disconnect(struct serio *serio) atkbd_disable(atkbd); /* make sure we don't have a command in flight */ - flush_scheduled_work(); + cancel_delayed_work_sync(&atkbd->event_work); sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); input_unregister_device(atkbd->dev); -- cgit v1.2.3 From 5fb17fd9a2d05be77be91369aa2f7b0db42fc8b4 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 11 Nov 2008 09:52:21 -0500 Subject: Input: psmouse - fix incorrect validate_byte check in OLPC protocol The validate_byte check logic was backwards; it should return true for an *invalid* packet. Thanks to Jeremy Katz for spotting this one. Signed-off-by: Andres Salomon Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/hgpk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index e82d34201e97..88f04bf2ad6c 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -125,7 +125,7 @@ static void hgpk_spewing_hack(struct psmouse *psmouse, */ static int hgpk_validate_byte(unsigned char *packet) { - return (packet[0] & 0x0C) == 0x08; + return (packet[0] & 0x0C) != 0x08; } static void hgpk_process_packet(struct psmouse *psmouse) -- cgit v1.2.3 From 4f485447973284f73e4e7cac3ab1d1e5fcd8aece Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Tue, 11 Nov 2008 11:40:23 -0500 Subject: Input: fix the example of an input device driver This patch fixes a wrong interrupt handler example given in the "Hello, world!"-like input driver in Documentation/input/input-programming.txt. Signed-off-by: Dmitri Vorobiev Signed-off-by: Randy Dunlap Signed-off-by: Dmitry Torokhov --- Documentation/input/input-programming.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/input/input-programming.txt b/Documentation/input/input-programming.txt index 81905e81585e..7f8b9d97bc47 100644 --- a/Documentation/input/input-programming.txt +++ b/Documentation/input/input-programming.txt @@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like: static struct input_dev *button_dev; -static void button_interrupt(int irq, void *dummy, struct pt_regs *fp) +static irqreturn_t button_interrupt(int irq, void *dummy) { input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1); input_sync(button_dev); + return IRQ_HANDLED; } static int __init button_init(void) -- cgit v1.2.3 From 4f1e6bc3646ab50b8181555ab7e6eeab68b8632a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 11 Nov 2008 16:47:24 +0100 Subject: ALSA: hda - Fix input pin initialization for STAC/IDT codecs The input pins are sometimes not initialized properly because of the optimization check of the current pinctl code. Force to initialize the mic input pins so that they can be set up properly even if they were in a weird state. But keep other input pins if already set up as input, since this could be an extra mic pin. Reference: Novell bnc#443738 https://bugzilla.novell.com/show_bug.cgi?id=443738 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 1627756e5c7d..a51160106df3 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3653,14 +3653,18 @@ static int stac92xx_init(struct hda_codec *codec) for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = cfg->input_pins[i]; if (nid) { - unsigned int pinctl = snd_hda_codec_read(codec, nid, - 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); - /* if PINCTL already set then skip */ - if (pinctl & AC_PINCAP_IN) - continue; - pinctl = AC_PINCTL_IN_EN; - if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) - pinctl |= stac92xx_get_vref(codec, nid); + unsigned int pinctl; + if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) { + /* for mic pins, force to initialize */ + pinctl = stac92xx_get_vref(codec, nid); + } else { + pinctl = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_PIN_WIDGET_CONTROL, 0); + /* if PINCTL already set then skip */ + if (pinctl & AC_PINCTL_IN_EN) + continue; + } + pinctl |= AC_PINCTL_IN_EN; stac92xx_auto_set_pinctl(codec, nid, pinctl); } } -- cgit v1.2.3 From 8eb04cf3402c59e84af9d2e86149edb4044f9a9e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 11 Nov 2008 14:48:44 +0000 Subject: tty: trivial - fix up email addresses in tty related stuff Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/isicom.c | 6 ++++-- drivers/char/mxser.c | 3 ++- drivers/usb/serial/ir-usb.c | 2 +- 3 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 7d30ee1d3fca..04e4549299ba 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -7,12 +7,14 @@ * Original driver code supplied by Multi-Tech * * Changes - * 1/9/98 alan@redhat.com Merge to 2.0.x kernel tree + * 1/9/98 alan@lxorguk.ukuu.org.uk + * Merge to 2.0.x kernel tree * Obtain and use official major/minors * Loader switched to a misc device * (fixed range check bug as a side effect) * Printk clean up - * 9/12/98 alan@redhat.com Rough port to 2.1.x + * 9/12/98 alan@lxorguk.ukuu.org.uk + * Rough port to 2.1.x * * 10/6/99 sameer Merged the ISA and PCI drivers to * a new unified driver. diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 8beef50f95a0..047766915411 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -14,7 +14,8 @@ * (at your option) any later version. * * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox - * . The original 1.8 code is available on www.moxa.com. + * . The original 1.8 code is available on + * www.moxa.com. * - Fixed x86_64 cleanness */ diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index b679a556b98d..4e2cda93da59 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -26,7 +26,7 @@ * Introduced common header to be used also in USB Gadget Framework. * Still needs some other style fixes. * - * 2007_Jun_21 Alan Cox + * 2007_Jun_21 Alan Cox * Minimal cleanups for some of the driver problens and tty layer abuse. * Still needs fixing to allow multiple dongles. * -- cgit v1.2.3 From 0906dd9df2f79042cfa82d8388895be7cbe7a51b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 11 Nov 2008 14:51:23 +0000 Subject: telephony: trivial: fix up email address Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/telephony/phonedev.c | 2 +- include/linux/telephony.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c index 37caf4d69037..b52cc830c0b4 100644 --- a/drivers/telephony/phonedev.c +++ b/drivers/telephony/phonedev.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * Author: Alan Cox, + * Author: Alan Cox, * * Fixes: Mar 01 2000 Thomas Sparr, * phone_register_device now works with unit!=PHONE_UNIT_ANY diff --git a/include/linux/telephony.h b/include/linux/telephony.h index 5b2b6261f193..f63afe330add 100644 --- a/include/linux/telephony.h +++ b/include/linux/telephony.h @@ -14,7 +14,7 @@ * Authors: Ed Okerson, * Greg Herlein, * - * Contributors: Alan Cox, + * Contributors: Alan Cox, * David W. Erhart, * * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR -- cgit v1.2.3 From c41ef344de212bd918f7765af21b5008628c03e0 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 28 Oct 2008 18:16:58 -0200 Subject: KVM: MMU: increase per-vcpu rmap cache alloc size The page fault path can use two rmap_desc structures, if: - walk_addr's dirty pte update allocates one rmap_desc. - mmu_lock is dropped, sptes are zapped resulting in rmap_desc being freed. - fetch->mmu_set_spte allocates another rmap_desc. Increase to 4 for safety. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 2a5e64881d9b..f1983d9477cd 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -314,7 +314,7 @@ static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu) if (r) goto out; r = mmu_topup_memory_cache(&vcpu->arch.mmu_rmap_desc_cache, - rmap_desc_cache, 1); + rmap_desc_cache, 4); if (r) goto out; r = mmu_topup_memory_cache_page(&vcpu->arch.mmu_page_cache, 8); -- cgit v1.2.3 From a2e4e28946c2c282a040ba4945c8f7288de69118 Mon Sep 17 00:00:00 2001 From: Xiantao Zhang Date: Thu, 23 Oct 2008 15:02:52 +0800 Subject: KVM: ia64: Use guest signal mask when blocking Before a vcpu blocks, it should switch to the guest signal mask to allow signals to unblock it. Signed-off-by: Xiantao Zhang Signed-off-by: Avi Kivity --- arch/ia64/kvm/kvm-ia64.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 3caac477de9e..af1464f7a6ad 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -673,16 +673,16 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) vcpu_load(vcpu); + if (vcpu->sigset_active) + sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); + if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) { kvm_vcpu_block(vcpu); clear_bit(KVM_REQ_UNHALT, &vcpu->requests); - vcpu_put(vcpu); - return -EAGAIN; + r = -EAGAIN; + goto out; } - if (vcpu->sigset_active) - sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); - if (vcpu->mmio_needed) { memcpy(vcpu->mmio_data, kvm_run->mmio.data, 8); kvm_set_mmio_data(vcpu); @@ -690,7 +690,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) vcpu->mmio_needed = 0; } r = __vcpu_run(vcpu, kvm_run); - +out: if (vcpu->sigset_active) sigprocmask(SIG_SETMASK, &sigsaved, NULL); -- cgit v1.2.3 From a29a2af378f3f6362b68e126e2541c8bde885ead Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Wed, 29 Oct 2008 14:13:39 -0700 Subject: x86: KVM guest: fix section mismatch warning in kvmclock.c WARNING: arch/x86/kernel/built-in.o(.text+0x1722c): Section mismatch in reference from the function kvm_setup_secondary_clock() to the function .devinit.text:setup_secondary_APIC_clock() The function kvm_setup_secondary_clock() references the function __devinit setup_secondary_APIC_clock(). This is often because kvm_setup_secondary_clock lacks a __devinit annotation or the annotation of setup_secondary_APIC_clock is wrong. Signed-off-by: Md.Rakib H. Mullick Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Avi Kivity --- arch/x86/kernel/kvmclock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 774ac4991568..1c9cc431ea4f 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -128,7 +128,7 @@ static int kvm_register_clock(char *txt) } #ifdef CONFIG_X86_LOCAL_APIC -static void kvm_setup_secondary_clock(void) +static void __devinit kvm_setup_secondary_clock(void) { /* * Now that the first cpu already had this clocksource initialized, -- cgit v1.2.3 From ca93e992fdfdc6569ac2845d7560eeb5de4a4e0b Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 4 Nov 2008 11:25:17 +0200 Subject: KVM: Require the PCI subsystem PCI device assignment makes calls to pci code, so require it to be built into the kernel. Signed-off-by: Avi Kivity --- arch/ia64/kvm/Kconfig | 2 ++ arch/x86/kvm/Kconfig | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig index 8e99fed6b3fd..f833a0b4188d 100644 --- a/arch/ia64/kvm/Kconfig +++ b/arch/ia64/kvm/Kconfig @@ -20,6 +20,8 @@ if VIRTUALIZATION config KVM tristate "Kernel-based Virtual Machine (KVM) support" depends on HAVE_KVM && EXPERIMENTAL + # for device assignment: + depends on PCI select PREEMPT_NOTIFIERS select ANON_INODES ---help--- diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig index ce3251ce5504..b81125f0bdee 100644 --- a/arch/x86/kvm/Kconfig +++ b/arch/x86/kvm/Kconfig @@ -20,6 +20,8 @@ if VIRTUALIZATION config KVM tristate "Kernel-based Virtual Machine (KVM) support" depends on HAVE_KVM + # for device assignment: + depends on PCI select PREEMPT_NOTIFIERS select MMU_NOTIFIER select ANON_INODES -- cgit v1.2.3 From 928d4bf747e9c290b690ff515d8f81e8ee226d97 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Thu, 6 Nov 2008 14:55:45 +0800 Subject: KVM: VMX: Set IGMT bit in EPT entry There is a potential issue that, when guest using pagetable without vmexit when EPT enabled, guest would use PAT/PCD/PWT bits to index PAT msr for it's memory, which would be inconsistent with host side and would cause host MCE due to inconsistent cache attribute. The patch set IGMT bit in EPT entry to ignore guest PAT and use WB as default memory type to protect host (notice that all memory mapped by KVM should be WB). Signed-off-by: Sheng Yang Signed-off-by: Avi Kivity --- arch/x86/kvm/vmx.c | 3 ++- arch/x86/kvm/vmx.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 2643b430d83a..d06b4dc0e2ea 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3564,7 +3564,8 @@ static int __init vmx_init(void) bypass_guest_pf = 0; kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK | VMX_EPT_WRITABLE_MASK | - VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT); + VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT | + VMX_EPT_IGMT_BIT); kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull, VMX_EPT_EXECUTABLE_MASK); kvm_enable_tdp(); diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h index 3e010d21fdd7..ec5edc339da6 100644 --- a/arch/x86/kvm/vmx.h +++ b/arch/x86/kvm/vmx.h @@ -352,6 +352,7 @@ enum vmcs_field { #define VMX_EPT_READABLE_MASK 0x1ull #define VMX_EPT_WRITABLE_MASK 0x2ull #define VMX_EPT_EXECUTABLE_MASK 0x4ull +#define VMX_EPT_IGMT_BIT (1ull << 6) #define VMX_EPT_IDENTITY_PAGETABLE_ADDR 0xfffbc000ul -- cgit v1.2.3 From c60ff51eb26dfcfb0bdc807b09a096aeadd01325 Mon Sep 17 00:00:00 2001 From: Xiantao Zhang Date: Sat, 8 Nov 2008 15:46:59 +0800 Subject: KVM: ia64: fix vmm_spin_{un}lock for !CONFIG_SMP In the case of !CONFIG_SMP, raw_spinlock_t is empty and the spinlock functions don't build. Fix by defining spinlock functions for the uniprocessor case. Signed-off-by: Xiantao Zhang Signed-off-by: Avi Kivity --- arch/ia64/kvm/vcpu.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h index 341e3fee280c..e9b2a4e121c0 100644 --- a/arch/ia64/kvm/vcpu.h +++ b/arch/ia64/kvm/vcpu.h @@ -384,6 +384,10 @@ static inline u64 __gpfn_is_io(u64 gpfn) #define MODE_IND(psr) \ (((psr).it << 2) + ((psr).dt << 1) + (psr).rt) +#ifndef CONFIG_SMP +#define _vmm_raw_spin_lock(x) do {}while(0) +#define _vmm_raw_spin_unlock(x) do {}while(0) +#else #define _vmm_raw_spin_lock(x) \ do { \ __u32 *ia64_spinlock_ptr = (__u32 *) (x); \ @@ -403,6 +407,7 @@ static inline u64 __gpfn_is_io(u64 gpfn) do { barrier(); \ ((spinlock_t *)x)->raw_lock.lock = 0; } \ while (0) +#endif void vmm_spin_lock(spinlock_t *lock); void vmm_spin_unlock(spinlock_t *lock); -- cgit v1.2.3 From e17d1dc0863767bab8fde4ba9be92c7f79e7fe50 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 11 Nov 2008 13:09:36 +0200 Subject: KVM: Fix pit memory leak if unable to allocate irq source id MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-By: Daniel Marjamäki Signed-off-by: Avi Kivity --- arch/x86/kvm/i8254.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index 8772dc946823..59ebd37ad79e 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -548,8 +548,10 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm) mutex_lock(&kvm->lock); pit->irq_source_id = kvm_request_irq_source_id(kvm); mutex_unlock(&kvm->lock); - if (pit->irq_source_id < 0) + if (pit->irq_source_id < 0) { + kfree(pit); return NULL; + } mutex_init(&pit->pit_state.lock); mutex_lock(&pit->pit_state.lock); -- cgit v1.2.3 From 734f0bae9504216bd760493ed4744a34cfe0e7ce Mon Sep 17 00:00:00 2001 From: Daniel Gimpelevich Date: Tue, 11 Nov 2008 13:57:30 -0500 Subject: Input: cm109 - add keymap for ATCom AU-100 phone Signed-off-by: Daniel Gimpelevich Signed-off-by: Dmitry Torokhov --- drivers/input/misc/cm109.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index bce160f4349b..86457feccfc4 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -42,7 +42,7 @@ static char *phone = "kip1000"; module_param(phone, charp, S_IRUSR); -MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}"); +MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}"); enum { /* HID Registers */ @@ -258,6 +258,37 @@ static unsigned short keymap_usbph01(int scancode) } } +/* + * Keymap for ATCom AU-100 + * http://www.atcom.cn/En_products_AU100.html + * http://www.packetizer.com/products/au100/ + * http://www.voip-info.org/wiki/view/AU-100 + * + * Contributed by daniel@gimpelevich.san-francisco.ca.us + */ +static unsigned short keymap_atcom(int scancode) +{ + switch (scancode) { /* phone key: */ + case 0x82: return KEY_NUMERIC_0; /* 0 */ + case 0x11: return KEY_NUMERIC_1; /* 1 */ + case 0x12: return KEY_NUMERIC_2; /* 2 */ + case 0x14: return KEY_NUMERIC_3; /* 3 */ + case 0x21: return KEY_NUMERIC_4; /* 4 */ + case 0x22: return KEY_NUMERIC_5; /* 5 */ + case 0x24: return KEY_NUMERIC_6; /* 6 */ + case 0x41: return KEY_NUMERIC_7; /* 7 */ + case 0x42: return KEY_NUMERIC_8; /* 8 */ + case 0x44: return KEY_NUMERIC_9; /* 9 */ + case 0x84: return KEY_NUMERIC_POUND; /* # */ + case 0x81: return KEY_NUMERIC_STAR; /* * */ + case 0x18: return KEY_ENTER; /* pickup */ + case 0x28: return KEY_ESC; /* hangup */ + case 0x48: return KEY_LEFT; /* left arrow */ + case 0x88: return KEY_RIGHT; /* right arrow */ + default: return special_keymap(scancode); + } +} + static unsigned short (*keymap)(int) = keymap_kip1000; /* @@ -840,6 +871,10 @@ static int __init cm109_select_keymap(void) keymap = keymap_usbph01; printk(KERN_INFO KBUILD_MODNAME ": " "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n"); + } else if (!strcasecmp(phone, "atcom")) { + keymap = keymap_atcom; + printk(KERN_INFO KBUILD_MODNAME ": " + "Keymap for ATCom AU-100 phone loaded\n"); } else { printk(KERN_ERR KBUILD_MODNAME ": " "Unsupported phone: %s\n", phone); -- cgit v1.2.3 From a358324466b171e145df20bdb74fe81759906de6 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 11 Nov 2008 15:01:42 -0500 Subject: ring-buffer: buffer record on/off switch Impact: enable/disable ring buffer recording API added Several kernel developers have requested that there be a way to stop recording into the ring buffers with a simple switch that can also be enabled from userspace. This patch addes a new kernel API to the ring buffers called: tracing_on() tracing_off() When tracing_off() is called, all ring buffers will not be able to record into their buffers. tracing_on() will enable the ring buffers again. These two act like an on/off switch. That is, there is no counting of the number of times tracing_off or tracing_on has been called. A new file is added to the debugfs/tracing directory called tracing_on This allows for userspace applications to also flip the switch. echo 0 > debugfs/tracing/tracing_on disables the tracing. echo 1 > /debugfs/tracing/tracing_on enables it. Note, this does not disable or enable any tracers. It only sets or clears a flag that needs to be set in order for the ring buffers to write to their buffers. It is a global flag, and affects all ring buffers. The buffers start out with tracing_on enabled. There are now three flags that control recording into the buffers: tracing_on: which affects all ring buffer tracers. buffer->record_disabled: which affects an allocated buffer, which may be set if an anomaly is detected, and tracing is disabled. cpu_buffer->record_disabled: which is set by tracing_stop() or if an anomaly is detected. tracing_start can not reenable this if an anomaly occurred. The userspace debugfs/tracing/tracing_enabled is implemented with tracing_stop() but the user space code can not enable it if the kernel called tracing_stop(). Userspace can enable the tracing_on even if the kernel disabled it. It is just a switch used to stop tracing if a condition was hit. tracing_on is not for protecting critical areas in the kernel nor is it for stopping tracing if an anomaly occurred. This is because userspace can reenable it at any time. Side effect: With this patch, I discovered a dead variable in ftrace.c called tracing_on. This patch removes it. Signed-off-by: Steven Rostedt --- include/linux/ring_buffer.h | 3 ++ kernel/trace/ftrace.c | 8 +--- kernel/trace/ring_buffer.c | 101 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 106 insertions(+), 6 deletions(-) diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index 536b0ca46a03..e097c2e6b6dc 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -120,6 +120,9 @@ unsigned long ring_buffer_overruns(struct ring_buffer *buffer); u64 ring_buffer_time_stamp(int cpu); void ring_buffer_normalize_time_stamp(int cpu, u64 *ts); +void tracing_on(void); +void tracing_off(void); + enum ring_buffer_flags { RB_FL_OVERWRITE = 1 << 0, }; diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 4a39d24568c8..14fa52297b28 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -185,7 +185,6 @@ enum { }; static int ftrace_filtered; -static int tracing_on; static LIST_HEAD(ftrace_new_addrs); @@ -506,13 +505,10 @@ static int __ftrace_modify_code(void *data) { int *command = data; - if (*command & FTRACE_ENABLE_CALLS) { + if (*command & FTRACE_ENABLE_CALLS) ftrace_replace_code(1); - tracing_on = 1; - } else if (*command & FTRACE_DISABLE_CALLS) { + else if (*command & FTRACE_DISABLE_CALLS) ftrace_replace_code(0); - tracing_on = 0; - } if (*command & FTRACE_UPDATE_TRACE_FUNC) ftrace_update_ftrace_func(ftrace_trace_function); diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 2f76193c3489..b08ee9f00c8d 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -16,6 +16,35 @@ #include #include +#include "trace.h" + +/* Global flag to disable all recording to ring buffers */ +static int ring_buffers_off __read_mostly; + +/** + * tracing_on - enable all tracing buffers + * + * This function enables all tracing buffers that may have been + * disabled with tracing_off. + */ +void tracing_on(void) +{ + ring_buffers_off = 0; +} + +/** + * tracing_off - turn off all tracing buffers + * + * This function stops all tracing buffers from recording data. + * It does not disable any overhead the tracers themselves may + * be causing. This function simply causes all recording to + * the ring buffers to fail. + */ +void tracing_off(void) +{ + ring_buffers_off = 1; +} + /* Up this if you want to test the TIME_EXTENTS and normalization */ #define DEBUG_SHIFT 0 @@ -1133,6 +1162,9 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, struct ring_buffer_event *event; int cpu, resched; + if (ring_buffers_off) + return NULL; + if (atomic_read(&buffer->record_disabled)) return NULL; @@ -1249,6 +1281,9 @@ int ring_buffer_write(struct ring_buffer *buffer, int ret = -EBUSY; int cpu, resched; + if (ring_buffers_off) + return -EBUSY; + if (atomic_read(&buffer->record_disabled)) return -EBUSY; @@ -2070,3 +2105,69 @@ int ring_buffer_swap_cpu(struct ring_buffer *buffer_a, return 0; } +static ssize_t +rb_simple_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + int *p = filp->private_data; + char buf[64]; + int r; + + /* !ring_buffers_off == tracing_on */ + r = sprintf(buf, "%d\n", !*p); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); +} + +static ssize_t +rb_simple_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + int *p = filp->private_data; + char buf[64]; + long val; + int ret; + + if (cnt >= sizeof(buf)) + return -EINVAL; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + ret = strict_strtoul(buf, 10, &val); + if (ret < 0) + return ret; + + /* !ring_buffers_off == tracing_on */ + *p = !val; + + (*ppos)++; + + return cnt; +} + +static struct file_operations rb_simple_fops = { + .open = tracing_open_generic, + .read = rb_simple_read, + .write = rb_simple_write, +}; + + +static __init int rb_init_debugfs(void) +{ + struct dentry *d_tracer; + struct dentry *entry; + + d_tracer = tracing_init_dentry(); + + entry = debugfs_create_file("tracing_on", 0644, d_tracer, + &ring_buffers_off, &rb_simple_fops); + if (!entry) + pr_warning("Could not create debugfs 'tracing_on' entry\n"); + + return 0; +} + +fs_initcall(rb_init_debugfs); -- cgit v1.2.3 From 137cb55c6dcd56cb367285adaf15f808a2a9fec7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 11 Nov 2008 13:12:33 -0700 Subject: iop-adma: add a dummy read to flush next descriptor update The current dummy read references the wrong address allowing the next descriptor address update to linger in the store buffer and get passed by an 'append' event. This issue was uncovered by the change from strongly-ordered to device memory for the adma registers. Signed-off-by: Dan Williams --- drivers/dma/iop-adma.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 71fba82462cb..95f5a9466816 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -411,6 +411,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) int slot_cnt; int slots_per_op; dma_cookie_t cookie; + dma_addr_t next_dma; grp_start = sw_desc->group_head; slot_cnt = grp_start->slot_cnt; @@ -425,11 +426,11 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) &old_chain_tail->chain_node); /* fix up the hardware chain */ - iop_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys); + next_dma = grp_start->async_tx.phys; + iop_desc_set_next_desc(old_chain_tail, next_dma); + BUG_ON(iop_desc_get_next_desc(old_chain_tail) != next_dma); /* flush */ - /* 1/ don't add pre-chained descriptors - * 2/ dummy read to flush next_desc write - */ + /* check for pre-chained descriptors */ BUG_ON(iop_desc_get_next_desc(sw_desc)); /* increment the pending count by the number of slots -- cgit v1.2.3 From 65e503814dec83c7b2ac955e75919d009109c919 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 11 Nov 2008 13:12:33 -0700 Subject: iop-adma: use iop_paranoia() for debug BUG_ONs Now that the critical read back to flush the next descriptor address is fixed we can downgrade some BUG_ONs that need only be enabled when testing changes to the driver. Signed-off-by: Dan Williams --- arch/arm/include/asm/hardware/iop3xx-adma.h | 5 +++-- arch/arm/include/asm/hardware/iop_adma.h | 6 ++++++ arch/arm/mach-iop13xx/include/mach/adma.h | 3 ++- drivers/dma/iop-adma.c | 2 +- 4 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h index 87bff09633aa..83e6ba338e2c 100644 --- a/arch/arm/include/asm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -730,7 +730,8 @@ static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, { /* hw_desc->next_desc is the same location for all channels */ union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - BUG_ON(hw_desc.dma->next_desc); + + iop_paranoia(hw_desc.dma->next_desc); hw_desc.dma->next_desc = next_desc_addr; } @@ -760,7 +761,7 @@ static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) struct iop3xx_desc_aau *hw_desc = desc->hw_desc; struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; - BUG_ON(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); + iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); return desc_ctrl.zero_result_err; } diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h index cb7e3611bcba..385c6e8cbbd2 100644 --- a/arch/arm/include/asm/hardware/iop_adma.h +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -23,6 +23,12 @@ #define IOP_ADMA_SLOT_SIZE 32 #define IOP_ADMA_THRESHOLD 4 +#ifdef DEBUG +#define IOP_PARANOIA 1 +#else +#define IOP_PARANOIA 0 +#endif +#define iop_paranoia(x) BUG_ON(IOP_PARANOIA && (x)) /** * struct iop_adma_device - internal representation of an ADMA device diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h index 60019c8e6465..5722e86f2174 100644 --- a/arch/arm/mach-iop13xx/include/mach/adma.h +++ b/arch/arm/mach-iop13xx/include/mach/adma.h @@ -404,7 +404,8 @@ static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, u32 next_desc_addr) { struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - BUG_ON(hw_desc->next_desc); + + iop_paranoia(hw_desc->next_desc); hw_desc->next_desc = next_desc_addr; } diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 95f5a9466816..c7a9306d951d 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -431,7 +431,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) BUG_ON(iop_desc_get_next_desc(old_chain_tail) != next_dma); /* flush */ /* check for pre-chained descriptors */ - BUG_ON(iop_desc_get_next_desc(sw_desc)); + iop_paranoia(iop_desc_get_next_desc(sw_desc)); /* increment the pending count by the number of slots * memcpy operations have a 1:1 (slot:operation) relation -- cgit v1.2.3 From 06190d8415219d9eef7d8f04b52a109e34575a76 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 11 Nov 2008 13:12:33 -0700 Subject: dmaengine: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Acked-by: Maciej Sosnowski Signed-off-by: Kay Sievers Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 4 ++-- drivers/dma/dmatest.c | 22 +++++++++++----------- 2 files changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index dc003a3a787d..5317e08221ec 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -399,8 +399,8 @@ int dma_async_device_register(struct dma_device *device) chan->chan_id = chancnt++; chan->dev.class = &dma_devclass; chan->dev.parent = device->dev; - snprintf(chan->dev.bus_id, BUS_ID_SIZE, "dma%dchan%d", - device->dev_id, chan->chan_id); + dev_set_name(&chan->dev, "dma%dchan%d", + device->dev_id, chan->chan_id); rc = device_register(&chan->dev); if (rc) { diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index d1e381e35a9e..ed9636bfb54a 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -20,11 +20,11 @@ static unsigned int test_buf_size = 16384; module_param(test_buf_size, uint, S_IRUGO); MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer"); -static char test_channel[BUS_ID_SIZE]; +static char test_channel[20]; module_param_string(channel, test_channel, sizeof(test_channel), S_IRUGO); MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)"); -static char test_device[BUS_ID_SIZE]; +static char test_device[20]; module_param_string(device, test_device, sizeof(test_device), S_IRUGO); MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)"); @@ -80,14 +80,14 @@ static bool dmatest_match_channel(struct dma_chan *chan) { if (test_channel[0] == '\0') return true; - return strcmp(chan->dev.bus_id, test_channel) == 0; + return strcmp(dev_name(&chan->dev), test_channel) == 0; } static bool dmatest_match_device(struct dma_device *device) { if (test_device[0] == '\0') return true; - return strcmp(device->dev->bus_id, test_device) == 0; + return strcmp(dev_name(device->dev), test_device) == 0; } static unsigned long dmatest_random(void) @@ -332,7 +332,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL); if (!dtc) { - pr_warning("dmatest: No memory for %s\n", chan->dev.bus_id); + pr_warning("dmatest: No memory for %s\n", dev_name(&chan->dev)); return DMA_NAK; } @@ -343,16 +343,16 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL); if (!thread) { pr_warning("dmatest: No memory for %s-test%u\n", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); break; } thread->chan = dtc->chan; smp_wmb(); thread->task = kthread_run(dmatest_func, thread, "%s-test%u", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); if (IS_ERR(thread->task)) { pr_warning("dmatest: Failed to run thread %s-test%u\n", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); kfree(thread); break; } @@ -362,7 +362,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) list_add_tail(&thread->node, &dtc->threads); } - pr_info("dmatest: Started %u threads using %s\n", i, chan->dev.bus_id); + pr_info("dmatest: Started %u threads using %s\n", i, dev_name(&chan->dev)); list_add_tail(&dtc->node, &dmatest_channels); nr_channels++; @@ -379,7 +379,7 @@ static enum dma_state_client dmatest_remove_channel(struct dma_chan *chan) list_del(&dtc->node); dmatest_cleanup_channel(dtc); pr_debug("dmatest: lost channel %s\n", - chan->dev.bus_id); + dev_name(&chan->dev)); return DMA_ACK; } } @@ -418,7 +418,7 @@ dmatest_event(struct dma_client *client, struct dma_chan *chan, default: pr_info("dmatest: Unhandled event %u (%s)\n", - state, chan->dev.bus_id); + state, dev_name(&chan->dev)); break; } -- cgit v1.2.3 From 2485b8674bf5762822e14e1554938e36511c0ae4 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Mon, 10 Nov 2008 13:54:43 +0900 Subject: PCI: ignore bit0 of _OSC return code Currently acpi_run_osc() checks all the bits in _OSC result code (the first DWORD in the capabilities buffer) to see error condition. But the bit 0, which doesn't indicate any error, must be ignored. The bit 0 is used as the query flag at _OSC invocation time. Some platforms clear it during _OSC evaluation, but the others don't. On latter platforms, current acpi_run_osc() mis-detects error when _OSC is evaluated with query flag set because it doesn't ignore the bit 0. Because of this, the __acpi_query_osc() always fails on such platforms. And this is the cause of the problem that pci_osc_control_set() doesn't work since the commit 4e39432f4df544d3dfe4fc90a22d87de64d15815 which changed pci_osc_control_set() to use __acpi_query_osc(). Tested-by:"Tomasz Czernecki Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index b3a63edb6901..ae5ec76dca77 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -63,7 +63,7 @@ static acpi_status acpi_run_osc(acpi_handle handle, union acpi_object in_params[4]; struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *out_obj; - u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE]; + u32 errors, flags = osc_args->capbuf[OSC_QUERY_TYPE]; /* Setting up input parameters */ input.count = 4; @@ -92,15 +92,16 @@ static acpi_status acpi_run_osc(acpi_handle handle, status = AE_TYPE; goto out_kfree; } - osc_dw0 = *((u32 *)out_obj->buffer.pointer); - if (osc_dw0) { - if (osc_dw0 & OSC_REQUEST_ERROR) + /* Need to ignore the bit0 in result code */ + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + if (errors & OSC_REQUEST_ERROR) printk(KERN_DEBUG "_OSC request fails\n"); - if (osc_dw0 & OSC_INVALID_UUID_ERROR) + if (errors & OSC_INVALID_UUID_ERROR) printk(KERN_DEBUG "_OSC invalid UUID\n"); - if (osc_dw0 & OSC_INVALID_REVISION_ERROR) + if (errors & OSC_INVALID_REVISION_ERROR) printk(KERN_DEBUG "_OSC invalid revision\n"); - if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) { + if (errors & OSC_CAPABILITIES_MASK_ERROR) { if (flags & OSC_QUERY_ENABLE) goto out_success; printk(KERN_DEBUG "_OSC FW not grant req. control\n"); -- cgit v1.2.3 From 1cfe62c8010ac56e1bd3827e30386a87cc2f3594 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 28 Oct 2008 00:35:30 +0300 Subject: ACPI: EC: revert msleep patch With the better solution for EC interrupt storm issue, there is no need to use msleep over udelay. References: http://bugzilla.kernel.org/show_bug.cgi?id=11810 http://bugzilla.kernel.org/show_bug.cgi?id=10724 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ef42316f89f5..3ef5b796a685 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -239,10 +239,10 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state) static int ec_poll(struct acpi_ec *ec) { unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY); - msleep(1); + udelay(ACPI_EC_UDELAY); while (time_before(jiffies, delay)) { gpe_transaction(ec, acpi_ec_read_status(ec)); - msleep(1); + udelay(ACPI_EC_UDELAY); if (ec_transaction_done(ec)) return 0; } -- cgit v1.2.3 From f8248434e6a11d7cd314281be3b39bbcf82fc243 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Sat, 1 Nov 2008 11:05:26 +0000 Subject: ACPI: EC: make kernel messages more useful when GPE storm is detected Make sure we can tell if the GPE storm workaround gets activated, and avoid flooding the logs afterwards. http://bugzilla.kernel.org/show_bug.cgi?id=11841 "plenty of line "ACPI: EC: non-query interrupt received, switching to interrupt mode" in dmesg" Signed-off-by: Alan Jenkins Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 3ef5b796a685..b340e08cf1d9 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -286,7 +286,8 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && t->irq_count > ACPI_EC_STORM_THRESHOLD) { - pr_debug(PREFIX "GPE storm detected\n"); + pr_info(PREFIX "GPE storm detected, " + "transactions will use polling mode\n"); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } return ret; @@ -566,9 +567,15 @@ static u32 acpi_ec_gpe_handler(void *data) if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && !test_bit(EC_FLAGS_NO_GPE, &ec->flags)) { /* this is non-query, must be confirmation */ - if (printk_ratelimit()) - pr_info(PREFIX "non-query interrupt received," + if (!test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + if (printk_ratelimit()) + pr_info(PREFIX "non-query interrupt received," + " switching to interrupt mode\n"); + } else { + /* hush, STORM switches the mode every transaction */ + pr_debug(PREFIX "non-query interrupt received," " switching to interrupt mode\n"); + } set_bit(EC_FLAGS_GPE_MODE, &ec->flags); } return ACPI_INTERRUPT_HANDLED; -- cgit v1.2.3 From dd15f8c42af09031e27da5b4d697ce925511f2e1 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sat, 8 Nov 2008 21:42:30 +0300 Subject: ACPI: EC: wait for last write gpe There is a possibility that EC might break if next command is issued within 1 us after write or burst-disable command. Suggestd-by: Zhao Yakui Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index b340e08cf1d9..cebd65d2e2a9 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -102,6 +102,7 @@ struct transaction { u8 command; u8 wlen; u8 rlen; + bool done; }; static struct acpi_ec { @@ -178,7 +179,7 @@ static int ec_transaction_done(struct acpi_ec *ec) unsigned long flags; int ret = 0; spin_lock_irqsave(&ec->curr_lock, flags); - if (!ec->curr || (!ec->curr->wlen && !ec->curr->rlen)) + if (!ec->curr || ec->curr->done) ret = 1; spin_unlock_irqrestore(&ec->curr_lock, flags); return ret; @@ -195,17 +196,20 @@ static void gpe_transaction(struct acpi_ec *ec, u8 status) acpi_ec_write_data(ec, *(ec->curr->wdata++)); --ec->curr->wlen; } else - /* false interrupt, state didn't change */ - ++ec->curr->irq_count; - + goto err; } else if (ec->curr->rlen > 0) { if ((status & ACPI_EC_FLAG_OBF) == 1) { *(ec->curr->rdata++) = acpi_ec_read_data(ec); - --ec->curr->rlen; + if (--ec->curr->rlen == 0) + ec->curr->done = true; } else - /* false interrupt, state didn't change */ - ++ec->curr->irq_count; - } + goto err; + } else if (ec->curr->wlen == 0 && (status & ACPI_EC_FLAG_IBF) == 0) + ec->curr->done = true; + goto unlock; +err: + /* false interrupt, state didn't change */ + ++ec->curr->irq_count; unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } @@ -265,6 +269,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ t->irq_count = 0; + t->done = false; ec->curr = t; acpi_ec_write_cmd(ec, ec->curr->command); if (ec->curr->command == ACPI_EC_COMMAND_QUERY) -- cgit v1.2.3 From a2f93aeadf97e870ff385030633a73e21146815d Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 12 Nov 2008 01:40:19 +0300 Subject: ACPI: EC: restart failed command Restart current transaction if we recieved unexpected GPEs instead of needed ones. http://bugzilla.kernel.org/show_bug.cgi?id=11896 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 41 +++++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index cebd65d2e2a9..34c67ca3bebe 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -100,6 +100,8 @@ struct transaction { u8 *rdata; unsigned short irq_count; u8 command; + u8 wi; + u8 ri; u8 wlen; u8 rlen; bool done; @@ -185,26 +187,34 @@ static int ec_transaction_done(struct acpi_ec *ec) return ret; } +static void start_transaction(struct acpi_ec *ec) +{ + ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; + ec->curr->done = false; + acpi_ec_write_cmd(ec, ec->curr->command); +} + static void gpe_transaction(struct acpi_ec *ec, u8 status) { unsigned long flags; spin_lock_irqsave(&ec->curr_lock, flags); if (!ec->curr) goto unlock; - if (ec->curr->wlen > 0) { - if ((status & ACPI_EC_FLAG_IBF) == 0) { - acpi_ec_write_data(ec, *(ec->curr->wdata++)); - --ec->curr->wlen; - } else + if (ec->curr->wlen > ec->curr->wi) { + if ((status & ACPI_EC_FLAG_IBF) == 0) + acpi_ec_write_data(ec, + ec->curr->wdata[ec->curr->wi++]); + else goto err; - } else if (ec->curr->rlen > 0) { + } else if (ec->curr->rlen > ec->curr->ri) { if ((status & ACPI_EC_FLAG_OBF) == 1) { - *(ec->curr->rdata++) = acpi_ec_read_data(ec); - if (--ec->curr->rlen == 0) + ec->curr->rdata[ec->curr->ri++] = acpi_ec_read_data(ec); + if (ec->curr->rlen == ec->curr->ri) ec->curr->done = true; } else goto err; - } else if (ec->curr->wlen == 0 && (status & ACPI_EC_FLAG_IBF) == 0) + } else if (ec->curr->wlen == ec->curr->wi && + (status & ACPI_EC_FLAG_IBF) == 0) ec->curr->done = true; goto unlock; err: @@ -219,6 +229,15 @@ static int acpi_ec_wait(struct acpi_ec *ec) if (wait_event_timeout(ec->wait, ec_transaction_done(ec), msecs_to_jiffies(ACPI_EC_DELAY))) return 0; + /* try restart command if we get any false interrupts */ + if (ec->curr->irq_count && + (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { + pr_debug(PREFIX "controller reset, restart transaction\n"); + start_transaction(ec); + if (wait_event_timeout(ec->wait, ec_transaction_done(ec), + msecs_to_jiffies(ACPI_EC_DELAY))) + return 0; + } /* missing GPEs, switch back to poll mode */ if (printk_ratelimit()) pr_info(PREFIX "missing confirmations, " @@ -268,10 +287,8 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ - t->irq_count = 0; - t->done = false; ec->curr = t; - acpi_ec_write_cmd(ec, ec->curr->command); + start_transaction(ec); if (ec->curr->command == ACPI_EC_COMMAND_QUERY) clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); spin_unlock_irqrestore(&ec->curr_lock, tmp); -- cgit v1.2.3 From 0b7084ac67fb84f0cf2f8bc02d7e0dea8521dd2d Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sat, 25 Oct 2008 21:48:46 +0400 Subject: ACPICA: Use spinlock for acpi_{en|dis}able_gpe Disabling gpe might interfere with gpe detection/handling, thus producing "interrupt not handled" errors. Ironically, disabling of GPE from interrupt context is already under spinlock, so only userspace needs to start using it. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/button.c | 2 +- drivers/acpi/ec.c | 10 +++++----- drivers/acpi/events/evxfevnt.c | 35 +++++++++-------------------------- drivers/acpi/sleep/wakeup.c | 8 ++++---- drivers/acpi/system.c | 4 ++-- include/acpi/acpixf.h | 4 ++-- 6 files changed, 23 insertions(+), 40 deletions(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index cb046c3fc3f2..eb6bf3025f97 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -479,7 +479,7 @@ static int acpi_button_add(struct acpi_device *device) device->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(device->wakeup.gpe_device, - device->wakeup.gpe_number, ACPI_NOT_ISR); + device->wakeup.gpe_number); device->wakeup.state.enabled = 1; } diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 34c67ca3bebe..89d6d2868e8c 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -282,7 +282,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* disable GPE during transaction if storm is detected */ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); - acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_disable_gpe(NULL, ec->gpe); } /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); @@ -305,7 +305,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* check if we received SCI during transaction */ ec_check_sci(ec, acpi_ec_read_status(ec)); /* it is safe to enable GPE outside of transaction */ - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && t->irq_count > ACPI_EC_STORM_THRESHOLD) { pr_info(PREFIX "GPE storm detected, " @@ -897,7 +897,7 @@ static int ec_install_handlers(struct acpi_ec *ec) if (ACPI_FAILURE(status)) return -ENODEV; acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME); - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); status = acpi_install_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler, @@ -1036,7 +1036,7 @@ static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state) /* Stop using GPE */ set_bit(EC_FLAGS_NO_GPE, &ec->flags); clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); - acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_disable_gpe(NULL, ec->gpe); return 0; } @@ -1045,7 +1045,7 @@ static int acpi_ec_resume(struct acpi_device *device) struct acpi_ec *ec = acpi_driver_data(device); /* Enable use of GPE back */ clear_bit(EC_FLAGS_NO_GPE, &ec->flags); - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); return 0; } diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c index 73bfd6bf962f..39db00874a22 100644 --- a/drivers/acpi/events/evxfevnt.c +++ b/drivers/acpi/events/evxfevnt.c @@ -248,21 +248,15 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe_type) * DESCRIPTION: Enable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_enable_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ @@ -277,9 +271,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_ev_enable_gpe(gpe_event_info, TRUE); unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } @@ -299,22 +291,15 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe) * DESCRIPTION: Disable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_disable_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } - + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); @@ -325,10 +310,8 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_ev_disable_gpe(gpe_event_info); - unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c index 38655eb132dc..dea4c23df764 100644 --- a/drivers/acpi/sleep/wakeup.c +++ b/drivers/acpi/sleep/wakeup.c @@ -88,7 +88,7 @@ void acpi_enable_wakeup_device(u8 sleep_state) spin_unlock(&acpi_device_lock); if (!dev->wakeup.flags.run_wake) acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_ISR); + dev->wakeup.gpe_number); spin_lock(&acpi_device_lock); } spin_unlock(&acpi_device_lock); @@ -122,7 +122,7 @@ void acpi_disable_wakeup_device(u8 sleep_state) ACPI_GPE_TYPE_WAKE_RUN); /* Re-enable it, since set_gpe_type will disable it */ acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); spin_lock(&acpi_device_lock); } continue; @@ -133,7 +133,7 @@ void acpi_disable_wakeup_device(u8 sleep_state) /* Never disable run-wake GPE */ if (!dev->wakeup.flags.run_wake) { acpi_disable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); acpi_clear_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_NOT_ISR); } @@ -162,7 +162,7 @@ static int __init acpi_wakeup_device_init(void) dev->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); dev->wakeup.state.enabled = 1; spin_lock(&acpi_device_lock); } diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171b7940..11995b612ad7 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -394,10 +394,10 @@ static ssize_t counter_set(struct kobject *kobj, if (index < num_gpes) { if (!strcmp(buf, "disable\n") && (status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_disable_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_disable_gpe(handle, index); else if (!strcmp(buf, "enable\n") && !(status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_enable_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_enable_gpe(handle, index); else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR); diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 94d94e126e9f..33bc0e3b1954 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -252,9 +252,9 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status); acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type); -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number); -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number); acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); -- cgit v1.2.3 From 06cf7d3c7af902939cd1754abcafb2464060cba8 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sun, 9 Nov 2008 19:01:06 +0300 Subject: ACPI: EC: lower interrupt storm treshold http://bugzilla.kernel.org/show_bug.cgi?id=11892 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 89d6d2868e8c..ab84f99f1369 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -70,7 +70,7 @@ enum ec_command { #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */ #define ACPI_EC_UDELAY 100 /* Wait 100us before polling EC again */ -#define ACPI_EC_STORM_THRESHOLD 20 /* number of false interrupts +#define ACPI_EC_STORM_THRESHOLD 8 /* number of false interrupts per one transaction */ enum { -- cgit v1.2.3 From 8517934ef6aaa28d6e055b98df65b31cedbd1372 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 11 Nov 2008 12:54:11 +0300 Subject: ACPI: EC: Don't do transaction from GPE handler in poll mode. Referencies: http://bugzilla.kernel.org/show_bug.cgi?id=12004 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ab84f99f1369..bd1af3e9e4ce 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -581,9 +581,12 @@ static u32 acpi_ec_gpe_handler(void *data) pr_debug(PREFIX "~~~> interrupt\n"); status = acpi_ec_read_status(ec); - gpe_transaction(ec, status); - if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0) - wake_up(&ec->wait); + if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) { + gpe_transaction(ec, status); + if (ec_transaction_done(ec) && + (status & ACPI_EC_FLAG_IBF) == 0) + wake_up(&ec->wait); + } ec_check_sci(ec, status); if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && -- cgit v1.2.3 From fad96ab62d38b94efbdb4c3c5fc55cb90d57937d Mon Sep 17 00:00:00 2001 From: Stefan Roscher Date: Tue, 11 Nov 2008 15:44:22 -0800 Subject: IB/ehca: Remove reference to special QP in case of port activation failure If the initialization of a special QP (e.g. AQP1) fails due to a software timeout, we have to remove the reference to that special QP struct from the port struct to stop the driver from accessing the QP, since it will be/has been destroyed by the caller, eg in this case ib_mad. Signed-off-by: Stefan Roscher Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_irq.c | 44 ++++++++++++++++++++++------------- drivers/infiniband/hw/ehca/ehca_qp.c | 5 ++++ 2 files changed, 33 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index cb55be04442c..757035ea246f 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -359,36 +359,48 @@ static void notify_port_conf_change(struct ehca_shca *shca, int port_num) *old_attr = new_attr; } +/* replay modify_qp for sqps -- return 0 if all is well, 1 if AQP1 destroyed */ +static int replay_modify_qp(struct ehca_sport *sport) +{ + int aqp1_destroyed; + unsigned long flags; + + spin_lock_irqsave(&sport->mod_sqp_lock, flags); + + aqp1_destroyed = !sport->ibqp_sqp[IB_QPT_GSI]; + + if (sport->ibqp_sqp[IB_QPT_SMI]) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); + if (!aqp1_destroyed) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); + + spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); + + return aqp1_destroyed; +} + static void parse_ec(struct ehca_shca *shca, u64 eqe) { u8 ec = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe); u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe); u8 spec_event; struct ehca_sport *sport = &shca->sport[port - 1]; - unsigned long flags; switch (ec) { case 0x30: /* port availability change */ if (EHCA_BMASK_GET(NEQE_PORT_AVAILABILITY, eqe)) { - int suppress_event; - /* replay modify_qp for sqps */ - spin_lock_irqsave(&sport->mod_sqp_lock, flags); - suppress_event = !sport->ibqp_sqp[IB_QPT_GSI]; - if (sport->ibqp_sqp[IB_QPT_SMI]) - ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); - if (!suppress_event) - ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); - spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); - - /* AQP1 was destroyed, ignore this event */ - if (suppress_event) - break; + /* only replay modify_qp calls in autodetect mode; + * if AQP1 was destroyed, the port is already down + * again and we can drop the event. + */ + if (ehca_nr_ports < 0) + if (replay_modify_qp(sport)) + break; sport->port_state = IB_PORT_ACTIVE; dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE, "is active"); - ehca_query_sma_attr(shca, port, - &sport->saved_attr); + ehca_query_sma_attr(shca, port, &sport->saved_attr); } else { sport->port_state = IB_PORT_DOWN; dispatch_port_event(shca, port, IB_EVENT_PORT_ERR, diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 4d54b9f64567..9e05ee2db39b 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -860,6 +860,11 @@ static struct ehca_qp *internal_create_qp( if (qp_type == IB_QPT_GSI) { h_ret = ehca_define_sqp(shca, my_qp, init_attr); if (h_ret != H_SUCCESS) { + kfree(my_qp->mod_qp_parm); + my_qp->mod_qp_parm = NULL; + /* the QP pointer is no longer valid */ + shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] = + NULL; ret = ehca2ib_return_code(h_ret); goto create_qp_exit6; } -- cgit v1.2.3 From 56960b546a88844a6f5295a9f81aab9e6b81edc9 Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Sun, 9 Nov 2008 04:20:05 +0000 Subject: fujitsu-laptop: Add DMI callback for Lifebook S6420 The Lifebook S6420 is the ICH9M-based follow-up to the S6410. The application panel contains the following keys: lock, mobility center, eco, info. Whilst key 4 might be more appropriate for help then key 2, I've done things the S6410 way. I can confirm that backlight control is functional, and that the lock key activates the Gnome screensaver as expected. Signed-off-by: Tony Vroon Acked-by: Jonathan Woithe Signed-off-by: Len Brown --- drivers/misc/fujitsu-laptop.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index 9124fcdc4d09..5ec77ae08d92 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -464,6 +464,14 @@ static int dmi_check_cb_s6410(const struct dmi_system_id *id) return 0; } +static int dmi_check_cb_s6420(const struct dmi_system_id *id) +{ + dmi_check_cb_common(id); + fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */ + fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */ + return 0; +} + static int dmi_check_cb_p8010(const struct dmi_system_id *id) { dmi_check_cb_common(id); @@ -481,6 +489,13 @@ static struct dmi_system_id fujitsu_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"), }, .callback = dmi_check_cb_s6410}, + { + .ident = "Fujitsu Siemens S6420", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"), + }, + .callback = dmi_check_cb_s6420}, { .ident = "Fujitsu LifeBook P8010", .matches = { -- cgit v1.2.3 From 32836259ff25ce97010569706cd33ba94de81d62 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:52 -0700 Subject: ACPI: pci_link: remove acpi_irq_balance_set() interface This removes the acpi_irq_balance_set() interface from the PCI interrupt link driver. x86 used acpi_irq_balance_set() to tell the PCI interrupt link driver to configure links to minimize IRQ sharing. But the link driver can easily figure out whether to turn on IRQ balancing based on the IRQ model (PIC/IOAPIC/etc), so we can get rid of that external interface. It's better for the driver to figure this out at init-time. If we set it externally via the x86 code, the interface reduces modularity, and we depend on the fact that acpi_process_madt() happens before we process the kernel command line. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- arch/x86/include/asm/acpi.h | 1 - arch/x86/kernel/acpi/boot.c | 1 - drivers/acpi/pci_link.c | 11 +++++++++-- 3 files changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 8d676d8ecde9..9830681446ad 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -113,7 +113,6 @@ static inline void acpi_disable_pci(void) acpi_pci_disabled = 1; acpi_noirq_set(); } -extern int acpi_irq_balance_set(char *str); /* routines for saving/restoring kernel state */ extern int acpi_save_state_mem(void); diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 8c1f76abae9e..4c51a2f8fd31 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1343,7 +1343,6 @@ static void __init acpi_process_madt(void) error = acpi_parse_madt_ioapic_entries(); if (!error) { acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC; - acpi_irq_balance_set(NULL); acpi_ioapic = 1; smp_found_config = 1; diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index fcfdef7b4fdd..e52ad91ce2dc 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -531,7 +531,7 @@ int __init acpi_irq_penalty_init(void) return 0; } -static int acpi_irq_balance; /* 0: static, 1: balance */ +static int acpi_irq_balance = -1; /* 0: static, 1: balance */ static int acpi_pci_link_allocate(struct acpi_pci_link *link) { @@ -950,10 +950,17 @@ device_initcall(irqrouter_init_sysfs); static int __init acpi_pci_link_init(void) { - if (acpi_noirq) return 0; + if (acpi_irq_balance == -1) { + /* no command line switch: enable balancing in IOAPIC mode */ + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) + acpi_irq_balance = 1; + else + acpi_irq_balance = 0; + } + acpi_link.count = 0; INIT_LIST_HEAD(&acpi_link.entries); -- cgit v1.2.3 From 1a22f08dbd0e77c7cf45b5f527f93131d0b591b6 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 12:19:05 +0900 Subject: serial: sh-sci: fix cannot work SH7723 SCIFA SH7723 has SCIFA. This module is similer SCI register map, but it has FIFO. So this patch adds new type(PORT_SCIFA) and change some type checking. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 20 +++++++++++--------- drivers/serial/sh-sci.h | 16 ++++++++-------- include/linux/serial_core.h | 3 +++ 3 files changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 5c0f32c7fbf6..518c0321e4d3 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -478,10 +478,10 @@ static void sci_transmit_chars(struct uart_port *port) return; } - if (port->type == PORT_SCIF) - count = scif_txroom(port); - else + if (port->type == PORT_SCI) count = sci_txroom(port); + else + count = scif_txroom(port); do { unsigned char c; @@ -510,7 +510,7 @@ static void sci_transmit_chars(struct uart_port *port) } else { ctrl = sci_in(port, SCSCR); - if (port->type == PORT_SCIF) { + if (port->type != PORT_SCI) { sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } @@ -536,10 +536,10 @@ static inline void sci_receive_chars(struct uart_port *port) return; while (1) { - if (port->type == PORT_SCIF) - count = scif_rxroom(port); - else + if (port->type == PORT_SCI) count = sci_rxroom(port); + else + count = scif_rxroom(port); /* Don't copy more bytes than there is room for in the buffer */ count = tty_buffer_request_room(tty, count); @@ -714,7 +714,7 @@ static inline int sci_handle_breaks(struct uart_port *port) #if defined(SCIF_ORER) /* XXX: Handle SCIF overrun error */ - if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { + if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { sci_out(port, SCLSR, 0); if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { copied++; @@ -1042,7 +1042,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - if (port->type == PORT_SCIF) + if (port->type != PORT_SCI) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); smr_val = sci_in(port, SCSMR) & 3; @@ -1085,6 +1085,7 @@ static const char *sci_type(struct uart_port *port) case PORT_SCI: return "sci"; case PORT_SCIF: return "scif"; case PORT_IRDA: return "irda"; + case PORT_SCIFA: return "scifa"; } return NULL; @@ -1112,6 +1113,7 @@ static void sci_config_port(struct uart_port *port, int flags) s->init_pins = sci_init_pins_sci; break; case PORT_SCIF: + case PORT_SCIFA: s->init_pins = sci_init_pins_scif; break; case PORT_IRDA: diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 6163a45f968f..9f33b064172e 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -289,18 +289,18 @@ #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ - if (port->type == PORT_SCI) { \ - SCI_IN(sci_size, sci_offset) \ - } else { \ - SCI_IN(scif_size, scif_offset); \ + if (port->type == PORT_SCIF) { \ + SCI_IN(scif_size, scif_offset) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_IN(sci_size, sci_offset); \ } \ } \ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ { \ - if (port->type == PORT_SCI) { \ - SCI_OUT(sci_size, sci_offset, value) \ - } else { \ - SCI_OUT(scif_size, scif_offset, value); \ + if (port->type == PORT_SCIF) { \ + SCI_OUT(scif_size, scif_offset, value) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_OUT(sci_size, sci_offset, value); \ } \ } diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index e27f216361fc..4e4f1277f3bf 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -155,6 +155,9 @@ #define PORT_SC26XX 82 +/* SH-SCI */ +#define PORT_SCIFA 83 + #ifdef __KERNEL__ #include -- cgit v1.2.3 From 51ee3d92bfb983790b9ed576c22f59d42adff329 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 12:19:11 +0900 Subject: fix sci type for SH7723 This patch changes sci type of SH7723 from PORT_SCI to PORT_SCIFA. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index a7412cede534..6d9e6972cfc9 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -119,17 +119,17 @@ static struct plat_sci_port sci_platform_data[] = { },{ .mapbase = 0xa4e30000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, + .type = PORT_SCIFA, .irqs = { 56, 56, 56, 56 }, },{ .mapbase = 0xa4e40000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, + .type = PORT_SCIFA, .irqs = { 88, 88, 88, 88 }, },{ .mapbase = 0xa4e50000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, + .type = PORT_SCIFA, .irqs = { 109, 109, 109, 109 }, }, { .flags = 0, -- cgit v1.2.3 From ade7a9b4ccd20ab8159c77a0abd20552f2d6b06c Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 16:47:21 +0900 Subject: usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB When I used SuperH on-chip USB, there was the problem that accessed r8a66597_root_hub which was not allocated. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- drivers/usb/host/r8a66597-hcd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index c18d8790c410..2376f24f3c83 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1763,11 +1763,12 @@ static void r8a66597_timer(unsigned long _r8a66597) { struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597; unsigned long flags; + int port; spin_lock_irqsave(&r8a66597->lock, flags); - r8a66597_root_hub_control(r8a66597, 0); - r8a66597_root_hub_control(r8a66597, 1); + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + r8a66597_root_hub_control(r8a66597, port); spin_unlock_irqrestore(&r8a66597->lock, flags); } -- cgit v1.2.3 From 185aed75570fb4f78ef283dfa26cd9da5fa06a91 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 12 Nov 2008 12:53:48 +0900 Subject: sh: Provide a sane valid_phys_addr_range() to prevent TLB reset with PMB. With the PMB enabled, only P1SEG and up are covered by the PMB mappings, meaning that situations where out-of-bounds physical addresses are read from will lead to TLB reset after the PMB miss, allowing for use cases like dd if=/dev/mem to reset the TLB. Fix this up to make sure the reference is between __MEMORY_START (phys) and __pa(high_memory). This is coherent across all variants of sh/sh64 with and without MMU, though the PMB bug itself is only applicable to SH-4A parts. Reported-by: Hideo Saito Signed-off-by: Paul Mundt --- arch/sh/include/asm/io.h | 4 ++++ arch/sh/mm/Makefile_32 | 2 +- arch/sh/mm/Makefile_64 | 2 +- arch/sh/mm/mmap.c | 31 +++++++++++++++++++++++++++++++ 4 files changed, 37 insertions(+), 2 deletions(-) create mode 100644 arch/sh/mm/mmap.c diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index 436c28539577..65eaae34e753 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -293,6 +293,10 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) */ #define xlate_dev_kmem_ptr(p) p +#define ARCH_HAS_VALID_PHYS_ADDR_RANGE +int valid_phys_addr_range(unsigned long addr, size_t size); +int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); + #endif /* __KERNEL__ */ #endif /* __ASM_SH_IO_H */ diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32 index 70e0906023cc..f066e76da204 100644 --- a/arch/sh/mm/Makefile_32 +++ b/arch/sh/mm/Makefile_32 @@ -2,7 +2,7 @@ # Makefile for the Linux SuperH-specific parts of the memory manager. # -obj-y := init.o extable_32.o consistent.o +obj-y := init.o extable_32.o consistent.o mmap.o ifndef CONFIG_CACHE_OFF cache-$(CONFIG_CPU_SH2) := cache-sh2.o diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64 index 0d92a8a3ac9a..9481d0f54efd 100644 --- a/arch/sh/mm/Makefile_64 +++ b/arch/sh/mm/Makefile_64 @@ -2,7 +2,7 @@ # Makefile for the Linux SuperH-specific parts of the memory manager. # -obj-y := init.o consistent.o +obj-y := init.o consistent.o mmap.o mmu-y := tlb-nommu.o pg-nommu.o extable_32.o mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \ diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c new file mode 100644 index 000000000000..1f3cc3d92d3d --- /dev/null +++ b/arch/sh/mm/mmap.c @@ -0,0 +1,31 @@ +/* + * arch/sh/mm/mmap.c + * + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include + +/* + * You really shouldn't be using read() or write() on /dev/mem. This + * might go away in the future. + */ +int valid_phys_addr_range(unsigned long addr, size_t count) +{ + if (addr < (PAGE_OFFSET + (PFN_START << PAGE_SHIFT))) + return 0; + if (addr + count > __pa(high_memory)) + return 0; + + return 1; +} + +int valid_mmap_phys_addr_range(unsigned long pfn, size_t size) +{ + return 1; +} -- cgit v1.2.3 From 621a0d5207c18012cb39932f2d9830a11a6cb03d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 12 Nov 2008 09:36:35 +0100 Subject: hrtimer: clean up unused callback modes Impact: cleanup git grep HRTIMER_CB_IRQSAFE revealed half the callback modes are actually unused. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- include/linux/hrtimer.h | 5 ----- kernel/hrtimer.c | 9 --------- 2 files changed, 14 deletions(-) diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 07e510a3b00a..3eba43878dcb 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -46,9 +46,6 @@ enum hrtimer_restart { * hrtimer callback modes: * * HRTIMER_CB_SOFTIRQ: Callback must run in softirq context - * HRTIMER_CB_IRQSAFE: Callback may run in hardirq context - * HRTIMER_CB_IRQSAFE_NO_RESTART: Callback may run in hardirq context and - * does not restart the timer * HRTIMER_CB_IRQSAFE_PERCPU: Callback must run in hardirq context * Special mode for tick emulation and * scheduler timer. Such timers are per @@ -61,8 +58,6 @@ enum hrtimer_restart { */ enum hrtimer_cb_mode { HRTIMER_CB_SOFTIRQ, - HRTIMER_CB_IRQSAFE, - HRTIMER_CB_IRQSAFE_NO_RESTART, HRTIMER_CB_IRQSAFE_PERCPU, HRTIMER_CB_IRQSAFE_UNLOCKED, }; diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 95d3949f2ae5..47e63349d1b2 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -664,14 +664,6 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, /* Timer is expired, act upon the callback mode */ switch(timer->cb_mode) { - case HRTIMER_CB_IRQSAFE_NO_RESTART: - debug_hrtimer_deactivate(timer); - /* - * We can call the callback from here. No restart - * happens, so no danger of recursion - */ - BUG_ON(timer->function(timer) != HRTIMER_NORESTART); - return 1; case HRTIMER_CB_IRQSAFE_PERCPU: case HRTIMER_CB_IRQSAFE_UNLOCKED: /* @@ -683,7 +675,6 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, */ debug_hrtimer_deactivate(timer); return 1; - case HRTIMER_CB_IRQSAFE: case HRTIMER_CB_SOFTIRQ: /* * Move everything else into the softirq pending list ! -- cgit v1.2.3 From d7a8943635485597ae7c6d554a8ccf3ce5a42d2d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 12 Nov 2008 09:48:04 +0100 Subject: ALSA: hda - Fix IDT/STAC multiple HP detection Due to the recent change for multiple HP as line-out switch, only one of the multiple headphons (usually a wrong one) is toggled and the other pins are still disabled. This causes the silent output problem on some Dell laptops. Also, the hp_switch check is screwed up when a line-in or a mic-in jack exists. This is added as an additional output, but hp_switch check doesn't take it into account. This patch fixes these issues: simplify hp_switch check by using the NID instead of bool, and clean up / fix the toggle of HP pins in unsol event handler code. Reference: Novell bnc#443267 https://bugzilla.novell.com/show_bug.cgi?id=443267 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 59 ++++++++++++++++++++++++++++++++---------- 1 file changed, 45 insertions(+), 14 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a51160106df3..4300a679cd86 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -212,7 +212,7 @@ struct sigmatel_spec { /* i/o switches */ unsigned int io_switch[2]; unsigned int clfe_swap; - unsigned int hp_switch; + unsigned int hp_switch; /* NID of HP as line-out */ unsigned int aloopback; struct hda_pcm pcm_rec[2]; /* PCM information */ @@ -2443,7 +2443,7 @@ static int stac92xx_hp_switch_get(struct snd_kcontrol *kcontrol, struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; - ucontrol->value.integer.value[0] = spec->hp_switch; + ucontrol->value.integer.value[0] = !!spec->hp_switch; return 0; } @@ -2452,8 +2452,9 @@ static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; - - spec->hp_switch = ucontrol->value.integer.value[0]; + int nid = kcontrol->private_value; + + spec->hp_switch = ucontrol->value.integer.value[0] ? nid : 0; /* check to be sure that the ports are upto date with * switch changes @@ -2862,7 +2863,8 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, if (cfg->hp_outs > 1) { err = stac92xx_add_control(spec, STAC_CTL_WIDGET_HP_SWITCH, - "Headphone as Line Out Switch", 0); + "Headphone as Line Out Switch", + cfg->hp_pins[cfg->hp_outs - 1]); if (err < 0) return err; } @@ -3786,11 +3788,30 @@ static int get_hp_pin_presence(struct hda_codec *codec, hda_nid_t nid) return 0; } +/* return non-zero if the hp-pin of the given array index isn't + * a jack-detection target + */ +static int no_hp_sensing(struct sigmatel_spec *spec, int i) +{ + struct auto_pin_cfg *cfg = &spec->autocfg; + + /* ignore sensing of shared line and mic jacks */ + if (spec->line_switch && + cfg->hp_pins[i] == cfg->input_pins[AUTO_PIN_LINE]) + return 1; + if (spec->mic_switch && + cfg->hp_pins[i] == cfg->input_pins[AUTO_PIN_MIC]) + return 1; + /* ignore if the pin is set as line-out */ + if (cfg->hp_pins[i] == spec->hp_switch) + return 1; + return 0; +} + static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) { struct sigmatel_spec *spec = codec->spec; struct auto_pin_cfg *cfg = &spec->autocfg; - int nid = cfg->hp_pins[cfg->hp_outs - 1]; int i, presence; presence = 0; @@ -3801,15 +3822,16 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) for (i = 0; i < cfg->hp_outs; i++) { if (presence) break; - if (spec->hp_switch && cfg->hp_pins[i] == nid) - break; + if (no_hp_sensing(spec, i)) + continue; presence = get_hp_pin_presence(codec, cfg->hp_pins[i]); } if (presence) { - /* disable lineouts, enable hp */ + /* disable lineouts */ if (spec->hp_switch) - stac92xx_reset_pinctl(codec, nid, AC_PINCTL_OUT_EN); + stac92xx_reset_pinctl(codec, spec->hp_switch, + AC_PINCTL_OUT_EN); for (i = 0; i < cfg->line_outs; i++) stac92xx_reset_pinctl(codec, cfg->line_out_pins[i], AC_PINCTL_OUT_EN); @@ -3821,9 +3843,10 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) spec->gpio_dir, spec->gpio_data & ~spec->eapd_mask); } else { - /* enable lineouts, disable hp */ + /* enable lineouts */ if (spec->hp_switch) - stac92xx_set_pinctl(codec, nid, AC_PINCTL_OUT_EN); + stac92xx_set_pinctl(codec, spec->hp_switch, + AC_PINCTL_OUT_EN); for (i = 0; i < cfg->line_outs; i++) stac92xx_set_pinctl(codec, cfg->line_out_pins[i], AC_PINCTL_OUT_EN); @@ -3835,8 +3858,16 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) spec->gpio_dir, spec->gpio_data | spec->eapd_mask); } - if (!spec->hp_switch && cfg->hp_outs > 1 && presence) - stac92xx_set_pinctl(codec, nid, AC_PINCTL_OUT_EN); + /* toggle hp outs */ + for (i = 0; i < cfg->hp_outs; i++) { + unsigned int val = AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN; + if (no_hp_sensing(spec, i)) + continue; + if (presence) + stac92xx_set_pinctl(codec, cfg->hp_pins[i], val); + else + stac92xx_reset_pinctl(codec, cfg->hp_pins[i], val); + } } static void stac92xx_pin_sense(struct hda_codec *codec, int idx) -- cgit v1.2.3 From 8f65b5354b1a34a536641bd915958662e8af5320 Mon Sep 17 00:00:00 2001 From: Doug Leith Date: Wed, 12 Nov 2008 01:41:09 -0800 Subject: tcp_htcp: last_cong bug fix This patch fixes a minor bug in tcp_htcp.c which has been highlighted by Lachlan Andrew and Lawrence Stewart. Currently, the time since the last congestion event, which is stored in variable last_cong, is reset whenever there is a state change into TCP_CA_Open. This includes transitions of the type TCP_CA_Open->TCP_CA_Disorder->TCP_CA_Open which are not associated with backoff of cwnd. The patch changes last_cong to be updated only on transitions into TCP_CA_Open that occur after experiencing the congestion-related states TCP_CA_Loss, TCP_CA_Recovery, TCP_CA_CWR. Signed-off-by: Doug Leith Signed-off-by: David S. Miller --- net/ipv4/tcp_htcp.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/net/ipv4/tcp_htcp.c b/net/ipv4/tcp_htcp.c index af99776146ff..937549b8a921 100644 --- a/net/ipv4/tcp_htcp.c +++ b/net/ipv4/tcp_htcp.c @@ -69,9 +69,12 @@ static u32 htcp_cwnd_undo(struct sock *sk) const struct tcp_sock *tp = tcp_sk(sk); struct htcp *ca = inet_csk_ca(sk); - ca->last_cong = ca->undo_last_cong; - ca->maxRTT = ca->undo_maxRTT; - ca->old_maxB = ca->undo_old_maxB; + if (ca->undo_last_cong) { + ca->last_cong = ca->undo_last_cong; + ca->maxRTT = ca->undo_maxRTT; + ca->old_maxB = ca->undo_old_maxB; + ca->undo_last_cong = 0; + } return max(tp->snd_cwnd, (tp->snd_ssthresh << 7) / ca->beta); } @@ -268,7 +271,10 @@ static void htcp_state(struct sock *sk, u8 new_state) case TCP_CA_Open: { struct htcp *ca = inet_csk_ca(sk); - ca->last_cong = jiffies; + if (ca->undo_last_cong) { + ca->last_cong = jiffies; + ca->undo_last_cong = 0; + } } break; case TCP_CA_CWR: -- cgit v1.2.3 From d35aac10eb7bcb3b80bef16b60844af0313f47f7 Mon Sep 17 00:00:00 2001 From: Patrick Ohly Date: Wed, 12 Nov 2008 01:54:56 -0800 Subject: net: put_cmsg_compat + SO_TIMESTAMP[NS]: use same name for value as caller In __sock_recv_timestamp() the additional SCM_TIMESTAMP[NS] is used. This has the same value as SO_TIMESTAMP[NS], so this is a purely cosmetic change. Signed-off-by: Patrick Ohly Signed-off-by: David S. Miller --- net/compat.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/compat.c b/net/compat.c index 67fb6a3834a3..6ce1a1cadcc0 100644 --- a/net/compat.c +++ b/net/compat.c @@ -226,14 +226,14 @@ int put_cmsg_compat(struct msghdr *kmsg, int level, int type, int len, void *dat return 0; /* XXX: return error? check spec. */ } - if (level == SOL_SOCKET && type == SO_TIMESTAMP) { + if (level == SOL_SOCKET && type == SCM_TIMESTAMP) { struct timeval *tv = (struct timeval *)data; ctv.tv_sec = tv->tv_sec; ctv.tv_usec = tv->tv_usec; data = &ctv; len = sizeof(ctv); } - if (level == SOL_SOCKET && type == SO_TIMESTAMPNS) { + if (level == SOL_SOCKET && type == SCM_TIMESTAMPNS) { struct timespec *ts = (struct timespec *)data; cts.tv_sec = ts->tv_sec; cts.tv_nsec = ts->tv_nsec; -- cgit v1.2.3 From 47e74f2ba8fbf9fb1378e2524e6cfdc2fb37f160 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 12 Nov 2008 00:01:27 -0500 Subject: ring-buffer: no preempt for sched_clock() Impact: disable preemption when calling sched_clock() The ring_buffer_time_stamp still uses sched_clock as its counter. But it is a bug to call it with preemption enabled. This requirement should not be pushed to the ring_buffer_time_stamp callers, so the ring_buffer_time_stamp needs to disable preemption when calling sched_clock. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b08ee9f00c8d..231db209fa82 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -51,8 +51,14 @@ void tracing_off(void) /* FIXME!!! */ u64 ring_buffer_time_stamp(int cpu) { + u64 time; + + preempt_disable_notrace(); /* shift to debug/test normalization and TIME_EXTENTS */ - return sched_clock() << DEBUG_SHIFT; + time = sched_clock() << DEBUG_SHIFT; + preempt_enable_notrace(); + + return time; } void ring_buffer_normalize_time_stamp(int cpu, u64 *ts) -- cgit v1.2.3 From a2d477778e82a60a0b7114cefdb70aa43af28782 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Wed, 12 Nov 2008 16:19:00 +0530 Subject: sched: fix stale value in average load per task Impact: fix load balancer load average calculation accuracy cpu_avg_load_per_task() returns a stale value when nr_running is 0. It returns an older stale (caculated when nr_running was non zero) value. This patch returns and sets rq->avg_load_per_task to zero when nr_running is 0. Compile and boot tested on a x86_64 box. Signed-off-by: Balbir Singh Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index 50a21f964679..3bafbe350f4f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1456,6 +1456,8 @@ static unsigned long cpu_avg_load_per_task(int cpu) if (rq->nr_running) rq->avg_load_per_task = rq->load.weight / rq->nr_running; + else + rq->avg_load_per_task = 0; return rq->avg_load_per_task; } -- cgit v1.2.3 From b3e123cf65baadc0cc30a843fd48cfd6a4b2e1ca Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Wed, 12 Nov 2008 10:16:47 -0800 Subject: RDMA/cxgb3: Fix deadlock in iw_cxgb3 (hang when configuring interface) When the iw_cxgb3 module's cxgb3_client "add" func gets called by the cxgb3 module, the iwarp driver ends up calling the ethtool ops get_drvinfo function in cxgb3 to get the fw version and other info. Currently the iwarp driver grabs the rtnl lock around this down call to serialize. As of 2.6.27 or so, things changed such that the rtnl lock is held around the call to the netdev driver open function. Also the cxgb3_client "add" function doesn't get called if the device is down. So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the device, the iw_cxgb3 add func gets called with the rtnl_lock held. If you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add func gets called without the rtnl_lock held. The former causes the deadlock, the latter does not. In addition, there are iw_cxgb3 sysfs handlers that also can call down into cxgb3 to gather the fw and hw versions. These can be called concurrently on different processors and at any time. Thus we need to push this serialization down in the cxgb3 driver get_drvinfo func. The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3. Signed-off-by: Steve Wise Acked-by: Divy Le Ray Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_provider.c | 6 ------ drivers/net/cxgb3/cxgb3_main.c | 2 ++ 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index ecff98043589..160ef482712d 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1102,9 +1102,7 @@ static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev) char *cp, *next; unsigned fw_maj, fw_min, fw_mic; - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); next = info.fw_version + 1; cp = strsep(&next, "."); @@ -1192,9 +1190,7 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.fw_version); } @@ -1207,9 +1203,7 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr, struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.driver); } diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 1ace41a13ac3..5e663ccda4d4 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) u32 fw_vers = 0; u32 tp_vers = 0; + spin_lock(&adapter->stats_lock); t3_get_fw_version(adapter, &fw_vers); t3_get_tp_version(adapter, &tp_vers); + spin_unlock(&adapter->stats_lock); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); -- cgit v1.2.3 From fe25c56190bbc0951d7c53b4ccd148e669d69938 Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 12 Nov 2008 10:24:36 -0800 Subject: IPoIB: Don't enable NAPI when it's already enabled If a P_Key is not present when an interface is created, ipoib_open() will return after doing napi_enable(). ipoib_open() will be called again from ipoib_pkey_poll() when the P_Key appears, after NAPI has already been enabled, and try to enable it again. This triggers a BUG_ON() in napi_enable(). Fix this by moving the call to napi_enable() to after the test for P_Key presence. Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index fddded7900d1..b1eeb5a427ca 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -106,12 +106,13 @@ int ipoib_open(struct net_device *dev) ipoib_dbg(priv, "bringing up interface\n"); - napi_enable(&priv->napi); set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); if (ipoib_pkey_dev_delay_open(dev)) return 0; + napi_enable(&priv->napi); + if (ipoib_ib_dev_open(dev)) { napi_disable(&priv->napi); return -EINVAL; -- cgit v1.2.3 From 93a3ab939ba90e00e193f0bad98f43fbdfbd925d Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 12 Nov 2008 10:24:38 -0800 Subject: IPoIB: Fix hang in ipoib_flush_paths() ipoib_flush_paths() can hang during an SM up/down loop: if path_rec_start() fails (for instance, because there is no sm_ah), the path is still added to the path list by neigh_add_path(). Then, ipoib_flush_paths() will wait for path->done, but it will never complete because the request was not issued at all. Fix this by completing path->done if issuing the query fails. This fixes . Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index b1eeb5a427ca..0b2f601e8caf 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -547,6 +547,7 @@ static int path_rec_start(struct net_device *dev, if (path->query_id < 0) { ipoib_warn(priv, "ib_sa_path_rec_get failed: %d\n", path->query_id); path->query = NULL; + complete(&path->done); return path->query_id; } -- cgit v1.2.3 From ff79ae80837cf45cb703b34824dd3862d2ddcb24 Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 12 Nov 2008 10:24:39 -0800 Subject: IPoIB: Fix crash in path_rec_completion() Fix a crash in path_rec_completion() during an SM up/down loop. If more than one path record request is issued, the first completion releases path->done, allowing ipoib_flush_paths() to free the path, and thus corrupting it for the second completion. Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") added the field path->valid and changed the test "if (!path)" to "if (!path || !path->valid)". This change made it possible for a path with an outstanding query to pass the test and issue another query on the same path. Having two queries on the same path leads to a crash. This fixes . Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 0b2f601e8caf..85257f6b9576 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -664,7 +664,7 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, skb_push(skb, sizeof *phdr); __skb_queue_tail(&path->queue, skb); - if (path_rec_start(dev, path)) { + if (!path->query && path_rec_start(dev, path)) { spin_unlock_irqrestore(&priv->lock, flags); path_free(dev, path); return; -- cgit v1.2.3 From 1c1271850494f06b63ae6b485e2e1b9c27ffb2d1 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Wed, 12 Nov 2008 01:24:41 +0100 Subject: parisc: fix find_extend_vma() breakage The STACK_GROWSUP case of stack expansion was missing a test for 'prev', which got removed by commit cb8f488c33539f096580e202f5438a809195008f ("mmap.c: deinline a few functions") by mistake. I found my original email in "sent" folder. The patch in that mail does NOT remove !prev. That change had beed added by someone else. Ok, I think we are not much interested in who did it, let's fix it for good. [ "It looks like this was caused by me fixing rejects. That was the fancy include-lots-of-context-so-it-wont-apply patch." - akpm ] Reported-and-bisected-by: Helge Deller Signed-off-by: Denys Vlasenko Cc: Andrew Morton Cc: Jiri Kosina Signed-off-by: Linus Torvalds --- mm/mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mmap.c b/mm/mmap.c index de14ac21e5b5..d4855a682ab6 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1704,7 +1704,7 @@ find_extend_vma(struct mm_struct *mm, unsigned long addr) vma = find_vma_prev(mm, addr, &prev); if (vma && (vma->vm_start <= addr)) return vma; - if (expand_stack(prev, addr)) + if (!prev || expand_stack(prev, addr)) return NULL; if (prev->vm_flags & VM_LOCKED) { if (mlock_vma_pages_range(prev, addr, prev->vm_end) < 0) -- cgit v1.2.3 From 31ea24bba77a16d3220b0822838785cbafb78175 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:34:59 +0000 Subject: MN10300: Clean up the misalignment handler a little Clean up the MN10300 misalignment handler a little by: (1) Use ilog2() rather than doing implementing log2() locally. (2) Make format_tbl[] const and static. (3) Making the debugging prints more consistent. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 27 +++++++++------------------ 1 file changed, 9 insertions(+), 18 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 32aa89dc3848..416c43baaa21 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -37,7 +37,7 @@ #include #if 0 -#define kdebug(FMT, ...) printk(KERN_DEBUG FMT, ##__VA_ARGS__) +#define kdebug(FMT, ...) printk(KERN_DEBUG "MISALIGN: "FMT"\n", ##__VA_ARGS__) #else #define kdebug(FMT, ...) do {} while (0) #endif @@ -50,14 +50,6 @@ static int misalignment_reg(unsigned long *registers, unsigned params, unsigned opcode, unsigned disp, unsigned long **_register); -static inline unsigned int_log2(unsigned x) -{ - unsigned y; - asm("bsch %1,%0" : "=r"(y) : "r"(x), "0"(0)); - return y; -} -#define log2(x) int_log2(x) - static const unsigned Dreg_index[] = { REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2 }; @@ -88,7 +80,7 @@ enum format_id { FMT_D9, }; -struct { +static const struct { u_int8_t opsz, dispsz; } format_tbl[16] = { [FMT_S0] = { 8, 0 }, @@ -273,7 +265,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) void *address; unsigned tmp, npop; - kdebug("MISALIGN at %lx\n", regs->pc); + kdebug("==>misalignment({pc=%lx})", regs->pc); if (in_interrupt()) die("Misalignment trap in interrupt context", regs, code); @@ -295,7 +287,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) noc = 8; for (pop = mn10300_opcodes; pop->name; pop++) { - npop = log2(pop->opcode | pop->opmask); + npop = ilog2(pop->opcode | pop->opmask); if (npop <= 0 || npop > 31) continue; npop = (npop + 8) & ~7; @@ -391,7 +383,7 @@ transfer_failed: /* we matched the opcode */ found_opcode: - kdebug("MISALIGN: %lx: %x==%x { %x, %x }\n", + kdebug("%lx: %x==%x { %x, %x }", regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]); tmp = format_tbl[pop->format].opsz; @@ -442,13 +434,13 @@ found_opcode: goto bad_reg_mode; if (strcmp(pop->name, "mov") == 0) { - kdebug("FIXUP: mov (%p),DARn\n", address); + kdebug("mov (%p),DARn", address); if (copy_from_user(&data, (void *) address, 4) != 0) goto transfer_failed; if (pop->params[0] & 0x1000000) *postinc += 4; } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("FIXUP: movhu (%p),DARn\n", address); + kdebug("movhu (%p),DARn", address); data = 0; if (copy_from_user(&data, (void *) address, 2) != 0) goto transfer_failed; @@ -472,14 +464,13 @@ found_opcode: data = *store; if (strcmp(pop->name, "mov") == 0) { - kdebug("FIXUP: mov %lx,(%p)\n", data, address); + kdebug("mov %lx,(%p)", data, address); if (copy_to_user((void *) address, &data, 4) != 0) goto transfer_failed; if (pop->params[1] & 0x1000000) *postinc += 4; } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("FIXUP: movhu %hx,(%p)\n", - (uint16_t) data, address); + kdebug("movhu %hx,(%p)", (uint16_t) data, address); if (copy_to_user((void *) address, &data, 2) != 0) goto transfer_failed; if (pop->params[1] & 0x1000000) -- cgit v1.2.3 From 9f55588968095306d52bd30564666d4fadce5e39 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:04 +0000 Subject: MN10300: Add built-in testing for misalignment handler Add configurable built-in testing for the MN10300 misalignment handler. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/Kconfig.debug | 9 +++ arch/mn10300/mm/misalignment.c | 161 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 170 insertions(+) diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug index 524e33819f32..ff80e86b9bd2 100644 --- a/arch/mn10300/Kconfig.debug +++ b/arch/mn10300/Kconfig.debug @@ -15,6 +15,15 @@ config DEBUG_DECOMPRESS_KERNEL decompressing Linux seeing "Uncompressing Linux... " and "Ok, booting the kernel.\n" on console. +config TEST_MISALIGNMENT_HANDLER + bool "Run tests on the misalignment handler" + depends on DEBUG_KERNEL + default n + help + If you say Y here the kernel will execute a list of misaligned memory + accesses to make sure the misalignment handler deals them with + correctly. If it does not, the kernel will throw a BUG. + config KPROBES bool "Kprobes" depends on DEBUG_KERNEL diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 416c43baaa21..93e09c4be1db 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -650,3 +650,164 @@ static int misalignment_reg(unsigned long *registers, unsigned params, return 1; } + +/* + * misalignment handler tests + */ +#ifdef CONFIG_TEST_MISALIGNMENT_HANDLER +static u8 __initdata testbuf[512] __attribute__((aligned(16))) = { + [257] = 0x11, + [258] = 0x22, + [259] = 0x33, + [260] = 0x44, +}; + +#define ASSERTCMP(X, OP, Y) \ +do { \ + if (unlikely(!((X) OP (Y)))) { \ + printk(KERN_ERR "\n"); \ + printk(KERN_ERR "MISALIGN: Assertion failed at line %u\n", \ + __LINE__); \ + printk(KERN_ERR "0x%lx " #OP " 0x%lx is false\n", \ + (unsigned long)(X), (unsigned long)(Y)); \ + BUG(); \ + } \ +} while(0) + +static int __init test_misalignment(void) +{ + register void *r asm("e0"); + register u32 y asm("e1"); + void *p = testbuf, *q; + u32 tmp, tmp2, x; + + printk(KERN_NOTICE "==>test_misalignment() [testbuf=%p]\n", p); + p++; + + printk(KERN_NOTICE "___ MOV (Am),Dn ___\n"); + q = p + 256; + asm volatile("mov (%0),%1" : "+a"(q), "=d"(x)); + ASSERTCMP(q, ==, p + 256); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (256,Am),Dn ___\n"); + q = p; + asm volatile("mov (256,%0),%1" : "+a"(q), "=d"(x)); + ASSERTCMP(q, ==, p); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (Di,Am),Dn ___\n"); + tmp = 256; + q = p; + asm volatile("mov (%2,%0),%1" : "+a"(q), "=d"(x), "+d"(tmp)); + ASSERTCMP(q, ==, p); + ASSERTCMP(x, ==, 0x44332211); + ASSERTCMP(tmp, ==, 256); + + printk(KERN_NOTICE "___ MOV (256,Rm),Rn ___\n"); + r = p; + asm volatile("mov (256,%0),%1" : "+r"(r), "=r"(y)); + ASSERTCMP(r, ==, p); + ASSERTCMP(y, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (Rm+),Rn ___\n"); + r = p + 256; + asm volatile("mov (%0+),%1" : "+r"(r), "=r"(y)); + ASSERTCMP(r, ==, p + 256 + 4); + ASSERTCMP(y, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (Rm+,8),Rn ___\n"); + r = p + 256; + asm volatile("mov (%0+,8),%1" : "+r"(r), "=r"(y)); + ASSERTCMP(r, ==, p + 256 + 8); + ASSERTCMP(y, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (7,SP),Rn ___\n"); + asm volatile( + "add -16,sp \n" + "mov +0x11,%0 \n" + "movbu %0,(7,sp) \n" + "mov +0x22,%0 \n" + "movbu %0,(8,sp) \n" + "mov +0x33,%0 \n" + "movbu %0,(9,sp) \n" + "mov +0x44,%0 \n" + "movbu %0,(10,sp) \n" + "mov (7,sp),%1 \n" + "add +16,sp \n" + : "+a"(q), "=d"(x)); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (259,SP),Rn ___\n"); + asm volatile( + "add -264,sp \n" + "mov +0x11,%0 \n" + "movbu %0,(259,sp) \n" + "mov +0x22,%0 \n" + "movbu %0,(260,sp) \n" + "mov +0x33,%0 \n" + "movbu %0,(261,sp) \n" + "mov +0x55,%0 \n" + "movbu %0,(262,sp) \n" + "mov (259,sp),%1 \n" + "add +264,sp \n" + : "+d"(tmp), "=d"(x)); + ASSERTCMP(x, ==, 0x55332211); + + printk(KERN_NOTICE "___ MOV (260,SP),Rn ___\n"); + asm volatile( + "add -264,sp \n" + "mov +0x11,%0 \n" + "movbu %0,(260,sp) \n" + "mov +0x22,%0 \n" + "movbu %0,(261,sp) \n" + "mov +0x33,%0 \n" + "movbu %0,(262,sp) \n" + "mov +0x55,%0 \n" + "movbu %0,(263,sp) \n" + "mov (260,sp),%1 \n" + "add +264,sp \n" + : "+d"(tmp), "=d"(x)); + ASSERTCMP(x, ==, 0x55332211); + + + printk(KERN_NOTICE "___ MOV_LNE ___\n"); + tmp = 1; + tmp2 = 2; + q = p + 256; + asm volatile( + "setlb \n" + "mov %2,%3 \n" + "mov %1,%2 \n" + "cmp +0,%1 \n" + "mov_lne (%0+,4),%1" + : "+r"(q), "+d"(tmp), "+d"(tmp2), "=d"(x) + : + : "cc"); + ASSERTCMP(q, ==, p + 256 + 12); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV in SETLB ___\n"); + tmp = 1; + tmp2 = 2; + q = p + 256; + asm volatile( + "setlb \n" + "mov %1,%3 \n" + "mov (%0+),%1 \n" + "cmp +0,%1 \n" + "lne " + : "+a"(q), "+d"(tmp), "+d"(tmp2), "=d"(x) + : + : "cc"); + + ASSERTCMP(q, ==, p + 256 + 8); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "<==test_misalignment()\n"); + return 0; +} + +arch_initcall(test_misalignment); + +#endif /* CONFIG_TEST_MISALIGNMENT_HANDLER */ -- cgit v1.2.3 From ee6e740cf7e5605b353af539eb9a6e17948747b6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:09 +0000 Subject: MN10300: Add further misalignment fixups Add further misalignment fixup support to the MN10300 arch, notably for ABS32 and SP+disp addressing. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 54 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 93e09c4be1db..ab03bac497cb 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -120,9 +120,14 @@ enum value_id { SD24, /* 24-bit signed displacement */ SIMM4_2, /* 4-bit signed displacement in opcode bits 4-7 */ SIMM8, /* 8-bit signed immediate */ + IMM8, /* 8-bit unsigned immediate */ + IMM16, /* 16-bit unsigned immediate */ IMM24, /* 24-bit unsigned immediate */ IMM32, /* 32-bit unsigned immediate */ - IMM32_HIGH8, /* 32-bit unsigned immediate, high 8-bits in opcode */ + IMM32_HIGH8, /* 32-bit unsigned immediate, LSB in opcode */ + + IMM32_MEM, /* 32-bit unsigned displacement */ + IMM32_HIGH8_MEM, /* 32-bit unsigned displacement, LSB in opcode */ DN0 = DM0, DN1 = DM1, @@ -177,6 +182,10 @@ struct mn10300_opcode { Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ static const struct mn10300_opcode mn10300_opcodes[] = { +{ "mov", 0x4200, 0xf300, 0, FMT_S1, 0, {DM1, MEM2(IMM8, SP)}}, +{ "mov", 0x4300, 0xf300, 0, FMT_S1, 0, {AM1, MEM2(IMM8, SP)}}, +{ "mov", 0x5800, 0xfc00, 0, FMT_S1, 0, {MEM2(IMM8, SP), DN0}}, +{ "mov", 0x5c00, 0xfc00, 0, FMT_S1, 0, {MEM2(IMM8, SP), AN0}}, { "mov", 0x60, 0xf0, 0, FMT_S0, 0, {DM1, MEM(AN0)}}, { "mov", 0x70, 0xf0, 0, FMT_S0, 0, {MEM(AM0), DN1}}, { "mov", 0xf000, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), AN1}}, @@ -199,24 +208,46 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "mov", 0xfa100000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}}, { "mov", 0xfa200000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), AN1}}, { "mov", 0xfa300000, 0xfff00000, 0, FMT_D2, 0, {AM1, MEM2(SD16, AN0)}}, +{ "mov", 0xfa900000, 0xfff30000, 0, FMT_D2, 0, {AM1, MEM2(IMM16, SP)}}, +{ "mov", 0xfa910000, 0xfff30000, 0, FMT_D2, 0, {DM1, MEM2(IMM16, SP)}}, +{ "mov", 0xfab00000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), AN0}}, +{ "mov", 0xfab40000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), DN0}}, { "mov", 0xfb0a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}}, { "mov", 0xfb1a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}}, { "mov", 0xfb6a0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}}, { "mov", 0xfb7a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}}, +{ "mov", 0xfb8a0000, 0xffff0f00, 0, FMT_D7, AM33, {MEM2(IMM8, SP), RN2}}, { "mov", 0xfb8e0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}}, +{ "mov", 0xfb9a0000, 0xffff0f00, 0, FMT_D7, AM33, {RM2, MEM2(IMM8, SP)}}, { "mov", 0xfb9e0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}}, { "mov", 0xfc000000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}}, { "mov", 0xfc100000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}}, { "mov", 0xfc200000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), AN1}}, { "mov", 0xfc300000, 0xfff00000, 0, FMT_D4, 0, {AM1, MEM2(IMM32,AN0)}}, +{ "mov", 0xfc800000, 0xfff30000, 0, FMT_D4, 0, {AM1, MEM(IMM32_MEM)}}, +{ "mov", 0xfc810000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM(IMM32_MEM)}}, +{ "mov", 0xfc900000, 0xfff30000, 0, FMT_D4, 0, {AM1, MEM2(IMM32, SP)}}, +{ "mov", 0xfc910000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM2(IMM32, SP)}}, +{ "mov", 0xfca00000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), AN0}}, +{ "mov", 0xfca40000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), DN0}}, +{ "mov", 0xfcb00000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), AN0}}, +{ "mov", 0xfcb40000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), DN0}}, { "mov", 0xfd0a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}}, { "mov", 0xfd1a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}}, { "mov", 0xfd6a0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}}, { "mov", 0xfd7a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}}, +{ "mov", 0xfd8a0000, 0xffff0f00, 0, FMT_D8, AM33, {MEM2(IMM24, SP), RN2}}, +{ "mov", 0xfd9a0000, 0xffff0f00, 0, FMT_D8, AM33, {RM2, MEM2(IMM24, SP)}}, +{ "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, { "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, +{ "mov", 0xfe0e0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM(IMM32_HIGH8_MEM), RN2}}, { "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, +{ "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, +{ "mov", 0xfe1e0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM(IMM32_HIGH8_MEM)}}, { "mov", 0xfe6a0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, { "mov", 0xfe7a0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, +{ "mov", 0xfe8a0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8, SP), RN2}}, +{ "mov", 0xfe9a0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, { "movhu", 0xf060, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), DN1}}, { "movhu", 0xf070, 0xfff0, 0, FMT_D0, 0, {DM1, MEM(AN0)}}, @@ -224,26 +255,42 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "movhu", 0xf4c0, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}}, { "movhu", 0xf86000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}}, { "movhu", 0xf87000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}}, +{ "movhu", 0xf89300, 0xfff300, 0, FMT_D1, 0, {DM1, MEM2(IMM8, SP)}}, +{ "movhu", 0xf8bc00, 0xfffc00, 0, FMT_D1, 0, {MEM2(IMM8, SP), DN0}}, { "movhu", 0xf94a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}}, { "movhu", 0xf95a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}}, { "movhu", 0xf9ea00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}}, { "movhu", 0xf9fa00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}}, { "movhu", 0xfa600000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}}, { "movhu", 0xfa700000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}}, +{ "movhu", 0xfa930000, 0xfff30000, 0, FMT_D2, 0, {DM1, MEM2(IMM16, SP)}}, +{ "movhu", 0xfabc0000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), DN0}}, { "movhu", 0xfb4a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}}, { "movhu", 0xfb5a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}}, +{ "movhu", 0xfbca0000, 0xffff0f00, 0, FMT_D7, AM33, {MEM2(IMM8, SP), RN2}}, { "movhu", 0xfbce0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}}, +{ "movhu", 0xfbda0000, 0xffff0f00, 0, FMT_D7, AM33, {RM2, MEM2(IMM8, SP)}}, { "movhu", 0xfbde0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}}, { "movhu", 0xfbea0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}}, { "movhu", 0xfbfa0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}}, { "movhu", 0xfc600000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}}, { "movhu", 0xfc700000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}}, +{ "movhu", 0xfc830000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM(IMM32_MEM)}}, +{ "movhu", 0xfc930000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM2(IMM32, SP)}}, +{ "movhu", 0xfcac0000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), DN0}}, +{ "movhu", 0xfcbc0000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), DN0}}, { "movhu", 0xfd4a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}}, { "movhu", 0xfd5a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}}, +{ "movhu", 0xfdca0000, 0xffff0f00, 0, FMT_D8, AM33, {MEM2(IMM24, SP), RN2}}, +{ "movhu", 0xfdda0000, 0xffff0f00, 0, FMT_D8, AM33, {RM2, MEM2(IMM24, SP)}}, { "movhu", 0xfdea0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}}, { "movhu", 0xfdfa0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}}, { "movhu", 0xfe4a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, +{ "movhu", 0xfe4e0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM(IMM32_HIGH8_MEM), RN2}}, { "movhu", 0xfe5a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, +{ "movhu", 0xfe5e0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM(IMM32_HIGH8_MEM)}}, +{ "movhu", 0xfeca0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8, SP), RN2}}, +{ "movhu", 0xfeda0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, { "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, { "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, { 0, 0, 0, 0, 0, 0, {0}}, @@ -552,6 +599,9 @@ static int misalignment_addr(unsigned long *registers, unsigned params, postinc = ®isters[Rreg_index[disp >> 4 & 0x0f]]; address += *postinc; break; + case SP: + address += registers[REG_SP >> 2]; + break; case SD8: case SIMM8: @@ -575,7 +625,9 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += disp & 0x00ffffff; break; case IMM32: + case IMM32_MEM: case IMM32_HIGH8: + case IMM32_HIGH8_MEM: address += disp; break; default: -- cgit v1.2.3 From b308bf3be1f75207c307eea9ada90e0b76194911 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:14 +0000 Subject: MN10300: Extract the displacement from an insn correctly in misalignment fixup Extract the displacement from an MN10300 instruction correctly in the misalignment fixup handler. The code should extract the displacement in LSB order, not MSB order. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index ab03bac497cb..614c32b6325b 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -43,11 +43,11 @@ #endif static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, void **_address, unsigned long **_postinc); static int misalignment_reg(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, unsigned long **_register); static const unsigned Dreg_index[] = { @@ -304,13 +304,13 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) const struct exception_table_entry *fixup; const struct mn10300_opcode *pop; unsigned long *registers = (unsigned long *) regs; - unsigned long data, *store, *postinc; + unsigned long data, *store, *postinc, disp; mm_segment_t seg; siginfo_t info; - uint32_t opcode, disp, noc, xo, xm; + uint32_t opcode, noc, xo, xm; uint8_t *pc, byte; void *address; - unsigned tmp, npop; + unsigned tmp, npop, dispsz, loop; kdebug("==>misalignment({pc=%lx})", regs->pc); @@ -445,17 +445,17 @@ found_opcode: /* grab the extra displacement (note it's LSB first) */ disp = 0; - tmp = format_tbl[pop->format].dispsz >> 3; - while (tmp > 0) { - tmp--; - disp <<= 8; - + dispsz = format_tbl[pop->format].dispsz; + for (loop = 0; loop < dispsz; loop += 8) { pc++; if (__get_user(byte, pc) != 0) goto fetch_error; - disp |= byte; + disp |= byte << loop; + kdebug("{%p} disp[%02x]=%02x", pc, loop, byte); } + kdebug("disp=%lx", disp); + set_fs(KERNEL_XDS); if (fixup || regs->epsw & EPSW_nSL) set_fs(seg); @@ -538,7 +538,7 @@ found_opcode: * determine the address that was being accessed */ static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, void **_address, unsigned long **_postinc) { unsigned long *postinc = NULL, address = 0, tmp; @@ -644,7 +644,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, * determine the register that is acting as source/dest */ static int misalignment_reg(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, unsigned long **_register) { params &= 0x7fffffff; -- cgit v1.2.3 From f911c685d65ea1855eb3f95b8eaf871e5d9342fa Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:20 +0000 Subject: MN10300: Fix register-postinc addressing misalignment handling Fix misalignment handling of operands with register postincrement addressing. The flag to indicate that postincrement is required should not be interpreted as an specification of a value to be added to the address. Also add BUGs to catch unimplemented parameter markings in the opcodes table. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 614c32b6325b..066ddc625a14 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -543,7 +543,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, { unsigned long *postinc = NULL, address = 0, tmp; - params &= 0x7fffffff; + params &= 0x00ffffff; do { switch (params & 0xff) { @@ -631,6 +631,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += disp; break; default: + BUG(); return 0; } } while ((params >>= 8)); @@ -697,6 +698,7 @@ static int misalignment_reg(unsigned long *registers, unsigned params, break; default: + BUG(); return 0; } -- cgit v1.2.3 From aefefbbec1ad25bafa97a7a1db25313ce26563e2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:25 +0000 Subject: MN10300: Allow misalignment fixup in interrupt handling Allow misalignment fixup in interrupt handling in the MN10300 arch. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 066ddc625a14..05a3c2f8d2df 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -314,9 +314,6 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) kdebug("==>misalignment({pc=%lx})", regs->pc); - if (in_interrupt()) - die("Misalignment trap in interrupt context", regs, code); - if (regs->epsw & EPSW_IE) asm volatile("or %0,epsw" : : "i"(EPSW_IE)); -- cgit v1.2.3 From ddb6d05cbaea76eddbee52585152ab801a8aedc7 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:30 +0000 Subject: MN10300: Perform misalignment fixups of MOV_Lcc Perform misalignment fixups of the MOV_Lcc instructions (move postinc memory to register and conditionally loop). Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 95 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 94 insertions(+), 1 deletion(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 05a3c2f8d2df..d5b45bb7d108 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -50,6 +50,8 @@ static int misalignment_reg(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, unsigned long **_register); +static void misalignment_MOV_Lcc(struct pt_regs *regs, uint32_t opcode); + static const unsigned Dreg_index[] = { REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2 }; @@ -78,6 +80,7 @@ enum format_id { FMT_D7, FMT_D8, FMT_D9, + FMT_D10, }; static const struct { @@ -95,6 +98,7 @@ static const struct { [FMT_D7] = { 24, 8 }, [FMT_D8] = { 24, 24 }, [FMT_D9] = { 24, 32 }, + [FMT_D10] = { 32, 0 }, }; enum value_id { @@ -293,6 +297,19 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "movhu", 0xfeda0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, { "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, { "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, + +{ "mov_llt", 0xf7e00000, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lgt", 0xf7e00001, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lge", 0xf7e00002, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lle", 0xf7e00003, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lcs", 0xf7e00004, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lhi", 0xf7e00005, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lcc", 0xf7e00006, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lls", 0xf7e00007, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_leq", 0xf7e00008, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lne", 0xf7e00009, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lra", 0xf7e0000a, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, + { 0, 0, 0, 0, 0, 0, {0}}, }; @@ -477,7 +494,8 @@ found_opcode: &store)) goto bad_reg_mode; - if (strcmp(pop->name, "mov") == 0) { + if (strcmp(pop->name, "mov") == 0 || + memcmp(pop->name, "mov_l", 5) == 0) { kdebug("mov (%p),DARn", address); if (copy_from_user(&data, (void *) address, 4) != 0) goto transfer_failed; @@ -495,6 +513,7 @@ found_opcode: } *store = data; + kdebug("loaded %lx", data); } else { /* move register to memory */ if (!misalignment_reg(registers, pop->params[0], opcode, disp, @@ -527,6 +546,11 @@ found_opcode: tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz; regs->pc += tmp >> 3; + /* handle MOV_Lcc, which are currently the only FMT_D10 insns that + * access memory */ + if (pop->format == FMT_D10) + misalignment_MOV_Lcc(regs, opcode); + set_fs(seg); return; } @@ -702,6 +726,75 @@ static int misalignment_reg(unsigned long *registers, unsigned params, return 1; } +/* + * handle the conditional loop part of the move-and-loop instructions + */ +static void misalignment_MOV_Lcc(struct pt_regs *regs, uint32_t opcode) +{ + unsigned long epsw = regs->epsw; + unsigned long NxorV; + + kdebug("MOV_Lcc %x [flags=%lx]", opcode, epsw & 0xf); + + /* calculate N^V and shift onto the same bit position as Z */ + NxorV = ((epsw >> 3) ^ epsw >> 1) & 1; + + switch (opcode & 0xf) { + case 0x0: /* MOV_LLT: N^V */ + if (NxorV) + goto take_the_loop; + return; + case 0x1: /* MOV_LGT: ~(Z or (N^V))*/ + if (!((epsw & EPSW_FLAG_Z) | NxorV)) + goto take_the_loop; + return; + case 0x2: /* MOV_LGE: ~(N^V) */ + if (!NxorV) + goto take_the_loop; + return; + case 0x3: /* MOV_LLE: Z or (N^V) */ + if ((epsw & EPSW_FLAG_Z) | NxorV) + goto take_the_loop; + return; + + case 0x4: /* MOV_LCS: C */ + if (epsw & EPSW_FLAG_C) + goto take_the_loop; + return; + case 0x5: /* MOV_LHI: ~(C or Z) */ + if (!(epsw & (EPSW_FLAG_C | EPSW_FLAG_Z))) + goto take_the_loop; + return; + case 0x6: /* MOV_LCC: ~C */ + if (!(epsw & EPSW_FLAG_C)) + goto take_the_loop; + return; + case 0x7: /* MOV_LLS: C or Z */ + if (epsw & (EPSW_FLAG_C | EPSW_FLAG_Z)) + goto take_the_loop; + return; + + case 0x8: /* MOV_LEQ: Z */ + if (epsw & EPSW_FLAG_Z) + goto take_the_loop; + return; + case 0x9: /* MOV_LNE: ~Z */ + if (!(epsw & EPSW_FLAG_Z)) + goto take_the_loop; + return; + case 0xa: /* MOV_LRA: always */ + goto take_the_loop; + + default: + BUG(); + } + +take_the_loop: + /* wind the PC back to just after the SETLB insn */ + kdebug("loop LAR=%lx", regs->lar); + regs->pc = regs->lar - 4; +} + /* * misalignment handler tests */ -- cgit v1.2.3 From 6d615c78fb92fbd80e52ba7acb2d4c4d503006c3 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:35 +0000 Subject: MN10300: Handle misaligned postinc-with-imm addressing mode correctly Correctly handle misalignment in MOV instructions with postinc-with-immediate addressing mode operands. In these, the immediate value is the increment to be applied the address register, not the displacement to the address. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 107 +++++++++++++++++++++-------------------- 1 file changed, 56 insertions(+), 51 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index d5b45bb7d108..61e65ec47db8 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -44,7 +44,8 @@ static int misalignment_addr(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, - void **_address, unsigned long **_postinc); + void **_address, unsigned long **_postinc, + unsigned long *_inc); static int misalignment_reg(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, @@ -150,7 +151,7 @@ enum value_id { }; struct mn10300_opcode { - const char *name; + const char name[8]; u_int32_t opcode; u_int32_t opmask; unsigned exclusion; @@ -310,7 +311,7 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "mov_lne", 0xf7e00009, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, { "mov_lra", 0xf7e0000a, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ 0, 0, 0, 0, 0, 0, {0}}, +{ "", 0, 0, 0, 0, 0, {0}}, }; /* @@ -321,11 +322,11 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) const struct exception_table_entry *fixup; const struct mn10300_opcode *pop; unsigned long *registers = (unsigned long *) regs; - unsigned long data, *store, *postinc, disp; + unsigned long data, *store, *postinc, disp, inc; mm_segment_t seg; siginfo_t info; uint32_t opcode, noc, xo, xm; - uint8_t *pc, byte; + uint8_t *pc, byte, datasz; void *address; unsigned tmp, npop, dispsz, loop; @@ -347,7 +348,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) opcode = byte; noc = 8; - for (pop = mn10300_opcodes; pop->name; pop++) { + for (pop = mn10300_opcodes; pop->name[0]; pop++) { npop = ilog2(pop->opcode | pop->opmask); if (npop <= 0 || npop > 31) continue; @@ -484,32 +485,31 @@ found_opcode: goto failed; } + /* determine the data transfer size of the move */ + if (pop->name[3] == 0 || /* "mov" */ + pop->name[4] == 'l') /* mov_lcc */ + inc = datasz = 4; + else if (pop->name[3] == 'h') /* movhu */ + inc = datasz = 2; + else + goto unsupported_instruction; + if (pop->params[0] & 0x80000000) { /* move memory to register */ if (!misalignment_addr(registers, pop->params[0], opcode, disp, - &address, &postinc)) + &address, &postinc, &inc)) goto bad_addr_mode; if (!misalignment_reg(registers, pop->params[1], opcode, disp, &store)) goto bad_reg_mode; - if (strcmp(pop->name, "mov") == 0 || - memcmp(pop->name, "mov_l", 5) == 0) { - kdebug("mov (%p),DARn", address); - if (copy_from_user(&data, (void *) address, 4) != 0) - goto transfer_failed; - if (pop->params[0] & 0x1000000) - *postinc += 4; - } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("movhu (%p),DARn", address); - data = 0; - if (copy_from_user(&data, (void *) address, 2) != 0) - goto transfer_failed; - if (pop->params[0] & 0x1000000) - *postinc += 2; - } else { - goto unsupported_instruction; + kdebug("mov%u (%p),DARn", datasz, address); + if (copy_from_user(&data, (void *) address, datasz) != 0) + goto transfer_failed; + if (pop->params[0] & 0x1000000) { + kdebug("inc=%lx", inc); + *postinc += inc; } *store = data; @@ -521,26 +521,16 @@ found_opcode: goto bad_reg_mode; if (!misalignment_addr(registers, pop->params[1], opcode, disp, - &address, &postinc)) + &address, &postinc, &inc)) goto bad_addr_mode; data = *store; - if (strcmp(pop->name, "mov") == 0) { - kdebug("mov %lx,(%p)", data, address); - if (copy_to_user((void *) address, &data, 4) != 0) - goto transfer_failed; - if (pop->params[1] & 0x1000000) - *postinc += 4; - } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("movhu %hx,(%p)", (uint16_t) data, address); - if (copy_to_user((void *) address, &data, 2) != 0) - goto transfer_failed; - if (pop->params[1] & 0x1000000) - *postinc += 2; - } else { - goto unsupported_instruction; - } + kdebug("mov%u %lx,(%p)", datasz, data, address); + if (copy_to_user((void *) address, &data, datasz) != 0) + goto transfer_failed; + if (pop->params[1] & 0x1000000) + *postinc += inc; } tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz; @@ -560,10 +550,17 @@ found_opcode: */ static int misalignment_addr(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, - void **_address, unsigned long **_postinc) + void **_address, unsigned long **_postinc, + unsigned long *_inc) { unsigned long *postinc = NULL, address = 0, tmp; + if (!(params & 0x1000000)) { + kdebug("noinc"); + *_inc = 0; + _inc = NULL; + } + params &= 0x00ffffff; do { @@ -624,32 +621,40 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += registers[REG_SP >> 2]; break; + /* displacements are either to be added to the address + * before use, or, in the case of post-inc addressing, + * to be added into the base register after use */ case SD8: case SIMM8: - address += (int32_t) (int8_t) (disp & 0xff); - break; + disp = (long) (int8_t) (disp & 0xff); + goto displace_or_inc; case SD16: - address += (int32_t) (int16_t) (disp & 0xffff); - break; + disp = (long) (int16_t) (disp & 0xffff); + goto displace_or_inc; case SD24: tmp = disp << 8; asm("asr 8,%0" : "=r"(tmp) : "0"(tmp)); - address += tmp; - break; + disp = (long) tmp; + goto displace_or_inc; case SIMM4_2: tmp = opcode >> 4 & 0x0f; tmp <<= 28; asm("asr 28,%0" : "=r"(tmp) : "0"(tmp)); - address += tmp; - break; + disp = (long) tmp; + goto displace_or_inc; case IMM24: - address += disp & 0x00ffffff; - break; + disp &= 0x00ffffff; + goto displace_or_inc; case IMM32: case IMM32_MEM: case IMM32_HIGH8: case IMM32_HIGH8_MEM: - address += disp; + displace_or_inc: + kdebug("%s %lx", _inc ? "incr" : "disp", disp); + if (!_inc) + address += disp; + else + *_inc = disp; break; default: BUG(); -- cgit v1.2.3 From 852c15b7362cf34e0d7949abefbfeeb0845d93b4 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:40 +0000 Subject: MN10300: Fix misaligned index-register addressing handling Fix misalignment handling for an address calculated from the sum of two registers. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 61e65ec47db8..a59836804bc6 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -570,11 +570,11 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += *postinc; break; case DM1: - postinc = ®isters[Dreg_index[opcode >> 2 & 0x0c]]; + postinc = ®isters[Dreg_index[opcode >> 2 & 0x03]]; address += *postinc; break; case DM2: - postinc = ®isters[Dreg_index[opcode >> 4 & 0x30]]; + postinc = ®isters[Dreg_index[opcode >> 4 & 0x03]]; address += *postinc; break; case AM0: @@ -582,11 +582,11 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += *postinc; break; case AM1: - postinc = ®isters[Areg_index[opcode >> 2 & 0x0c]]; + postinc = ®isters[Areg_index[opcode >> 2 & 0x03]]; address += *postinc; break; case AM2: - postinc = ®isters[Areg_index[opcode >> 4 & 0x30]]; + postinc = ®isters[Areg_index[opcode >> 4 & 0x03]]; address += *postinc; break; case RM0: -- cgit v1.2.3 From d3bd462865421dd8be310fac2d2f6da6069f9679 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:45 +0000 Subject: MN10300: Handle misaligned SP-based operands Support misalignment handling for instructions that have kernel SP-based address operands, including fixing those that include IMM8 or IMM16 displacements. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index a59836804bc6..e247a6e1b8de 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -42,8 +42,9 @@ #define kdebug(FMT, ...) do {} while (0) #endif -static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned long disp, +static int misalignment_addr(unsigned long *registers, unsigned long sp, + unsigned params, unsigned opcode, + unsigned long disp, void **_address, unsigned long **_postinc, unsigned long *_inc); @@ -322,7 +323,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) const struct exception_table_entry *fixup; const struct mn10300_opcode *pop; unsigned long *registers = (unsigned long *) regs; - unsigned long data, *store, *postinc, disp, inc; + unsigned long data, *store, *postinc, disp, inc, sp; mm_segment_t seg; siginfo_t info; uint32_t opcode, noc, xo, xm; @@ -330,7 +331,12 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) void *address; unsigned tmp, npop, dispsz, loop; - kdebug("==>misalignment({pc=%lx})", regs->pc); + if (user_mode(regs)) + sp = regs->sp; + else + sp = (unsigned long) regs + sizeof(*regs); + + kdebug("==>misalignment({pc=%lx,sp=%lx})", regs->pc, sp); if (regs->epsw & EPSW_IE) asm volatile("or %0,epsw" : : "i"(EPSW_IE)); @@ -496,7 +502,8 @@ found_opcode: if (pop->params[0] & 0x80000000) { /* move memory to register */ - if (!misalignment_addr(registers, pop->params[0], opcode, disp, + if (!misalignment_addr(registers, sp, + pop->params[0], opcode, disp, &address, &postinc, &inc)) goto bad_addr_mode; @@ -520,7 +527,8 @@ found_opcode: &store)) goto bad_reg_mode; - if (!misalignment_addr(registers, pop->params[1], opcode, disp, + if (!misalignment_addr(registers, sp, + pop->params[1], opcode, disp, &address, &postinc, &inc)) goto bad_addr_mode; @@ -548,8 +556,9 @@ found_opcode: /* * determine the address that was being accessed */ -static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned long disp, +static int misalignment_addr(unsigned long *registers, unsigned long sp, + unsigned params, unsigned opcode, + unsigned long disp, void **_address, unsigned long **_postinc, unsigned long *_inc) { @@ -618,7 +627,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += *postinc; break; case SP: - address += registers[REG_SP >> 2]; + address += sp; break; /* displacements are either to be added to the address @@ -642,6 +651,12 @@ static int misalignment_addr(unsigned long *registers, unsigned params, asm("asr 28,%0" : "=r"(tmp) : "0"(tmp)); disp = (long) tmp; goto displace_or_inc; + case IMM8: + disp &= 0x000000ff; + goto displace_or_inc; + case IMM16: + disp &= 0x0000ffff; + goto displace_or_inc; case IMM24: disp &= 0x00ffffff; goto displace_or_inc; -- cgit v1.2.3 From bd9384a9fdd6c15da6b01b2844c3471d07a45d64 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:50 +0000 Subject: MN10300: Don't handle misaligned loading and storing of SP Don't handle the misaligned loading and storing of the SP register as in C code that's most certainly a compiler bug. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index e247a6e1b8de..7b670a3d7659 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -204,8 +204,6 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "mov", 0xf81000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}}, { "mov", 0xf82000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8,AM0), AN1}}, { "mov", 0xf83000, 0xfff000, 0, FMT_D1, 0, {AM1, MEM2(SD8, AN0)}}, -{ "mov", 0xf8f000, 0xfffc00, 0, FMT_D1, AM33, {MEM2(SD8, AM0), SP}}, -{ "mov", 0xf8f400, 0xfffc00, 0, FMT_D1, AM33, {SP, MEM2(SD8, AN0)}}, { "mov", 0xf90a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}}, { "mov", 0xf91a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}}, { "mov", 0xf96a00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}}, -- cgit v1.2.3 From 58a47481b6ecb6dd05ab4a788e1f2ae3c7c46f57 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:55 +0000 Subject: MN10300: Don't do misalignment handling for userspace Don't do misalignment handling for userspace misalignment faults: just generate an appropriate SIGBUS instead. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 52 +++++++++++++++++++----------------------- 1 file changed, 23 insertions(+), 29 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 7b670a3d7659..94c4a4358065 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -329,10 +329,11 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) void *address; unsigned tmp, npop, dispsz, loop; + /* we don't fix up userspace misalignment faults */ if (user_mode(regs)) - sp = regs->sp; - else - sp = (unsigned long) regs + sizeof(*regs); + goto bus_error; + + sp = (unsigned long) regs + sizeof(*regs); kdebug("==>misalignment({pc=%lx,sp=%lx})", regs->pc, sp); @@ -386,15 +387,15 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) } /* didn't manage to find a fixup */ - if (!user_mode(regs)) - printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n", - regs->pc, opcode); + printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n", + regs->pc, opcode); failed: set_fs(seg); if (die_if_no_fixup("misalignment error", regs, code)) return; +bus_error: info.si_signo = SIGBUS; info.si_errno = 0; info.si_code = BUS_ADRALN; @@ -404,31 +405,27 @@ failed: /* error reading opcodes */ fetch_error: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %p: fault whilst reading instruction data\n", - pc); + printk(KERN_CRIT + "MISALIGN: %p: fault whilst reading instruction data\n", + pc); goto failed; bad_addr_mode: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx: unsupported addressing mode %x\n", - regs->pc, opcode); + printk(KERN_CRIT + "MISALIGN: %lx: unsupported addressing mode %x\n", + regs->pc, opcode); goto failed; bad_reg_mode: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx: unsupported register mode %x\n", - regs->pc, opcode); + printk(KERN_CRIT + "MISALIGN: %lx: unsupported register mode %x\n", + regs->pc, opcode); goto failed; unsupported_instruction: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx: unsupported instruction %x (%s)\n", - regs->pc, opcode, pop->name); + printk(KERN_CRIT + "MISALIGN: %lx: unsupported instruction %x (%s)\n", + regs->pc, opcode, pop->name); goto failed; transfer_failed: @@ -476,16 +473,14 @@ found_opcode: kdebug("disp=%lx", disp); set_fs(KERNEL_XDS); - if (fixup || regs->epsw & EPSW_nSL) + if (fixup) set_fs(seg); tmp = (pop->params[0] ^ pop->params[1]) & 0x80000000; if (!tmp) { - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx:" - " insn not move to/from memory %x\n", - regs->pc, opcode); + printk(KERN_CRIT + "MISALIGN: %lx: insn not move to/from memory %x\n", + regs->pc, opcode); goto failed; } @@ -548,7 +543,6 @@ found_opcode: misalignment_MOV_Lcc(regs, opcode); set_fs(seg); - return; } /* -- cgit v1.2.3 From 5cbd54ef470d880fc37fbe4b21eb514806d51e0d Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 12 Nov 2008 20:05:50 +0100 Subject: sched: fix init_idle()'s use of sched_clock() Maciej Rutecki reported: > I have this bug during suspend to disk: > > [ 188.592151] Enabling non-boot CPUs ... > [ 188.592151] SMP alternatives: switching to SMP code > [ 188.666058] BUG: using smp_processor_id() in preemptible > [00000000] > code: suspend_to_disk/2934 > [ 188.666064] caller is native_sched_clock+0x2b/0x80 Which, as noted by Linus, was caused by me, via: 7cbaef9c "sched: optimize sched_clock() a bit" Move the rq locking a bit earlier in the initialization sequence, that will make the sched_clock() call in init_idle() non-preemptible. Reported-by: Maciej Rutecki Signed-off-by: Ingo Molnar --- kernel/sched.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 3bafbe350f4f..c94baf2969e7 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5870,6 +5870,8 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) struct rq *rq = cpu_rq(cpu); unsigned long flags; + spin_lock_irqsave(&rq->lock, flags); + __sched_fork(idle); idle->se.exec_start = sched_clock(); @@ -5877,7 +5879,6 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) idle->cpus_allowed = cpumask_of_cpu(cpu); __set_task_cpu(idle, cpu); - spin_lock_irqsave(&rq->lock, flags); rq->curr = rq->idle = idle; #if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW) idle->oncpu = 1; -- cgit v1.2.3 From 8f7c41d4cec91cdbfa89b4a77d5a628938875366 Mon Sep 17 00:00:00 2001 From: Ivan Kuten Date: Mon, 10 Nov 2008 19:39:25 -0600 Subject: rtl8187: Add Abocom USB ID Signed-off-by: Ivan Kuten Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187_dev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 431e3c78bf27..0ce9fb037950 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -48,6 +48,8 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + /* Abocom */ + {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, {} }; -- cgit v1.2.3 From db7fb86b0ca565cf3537401612581a8158025cc2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 11 Nov 2008 11:28:04 +0100 Subject: mac80211: fix notify_mac function The ieee80211_notify_mac() function uses ieee80211_sta_req_auth() which in turn calls ieee80211_set_disassoc() which calls a few functions that need to be able to sleep, so ieee80211_notify_mac() cannot use RCU locking for the interface list and must use rtnl locking instead. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 87665d7bb4f9..14d165f0df75 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2570,14 +2570,14 @@ void ieee80211_notify_mac(struct ieee80211_hw *hw, switch (notif_type) { case IEEE80211_NOTIFY_RE_ASSOC: - rcu_read_lock(); - list_for_each_entry_rcu(sdata, &local->interfaces, list) { + rtnl_lock(); + list_for_each_entry(sdata, &local->interfaces, list) { if (sdata->vif.type != NL80211_IFTYPE_STATION) continue; ieee80211_sta_req_auth(sdata, &sdata->u.sta); } - rcu_read_unlock(); + rtnl_unlock(); break; } } -- cgit v1.2.3 From f3c769185a28b7947d97b3552a977102c1fac3f2 Mon Sep 17 00:00:00 2001 From: Bob Jolliffe Date: Wed, 12 Nov 2008 20:16:59 +0000 Subject: rtl8187 : support for Sitecom WL-168 0001 v4 the Sitecom 0001 v4 with product id 0x0df6:0028, uses Realtek's RTL8187B and work fine with new 2.6.27 driver. Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187_dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 0ce9fb037950..69eb0132593b 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -48,6 +48,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, /* Abocom */ {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, {} -- cgit v1.2.3 From f7cd168645dda3e9067f24fabbfa787f9a237488 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Nov 2008 16:54:22 -0500 Subject: hostap: pad the skb->cb usage in lieu of a proper fix Like mac80211 did, this driver makes 'clever' use of skb->cb to pass information along with an skb as it is requeued from the virtual device to the physical wireless device. Unfortunately, that trick no longer works... Unlike mac80211, code complexity and driver apathy makes this hack the best option we have in the short run. Hopefully someone will eventually be motivated to code a proper fix before all the effected hardware dies. (Above text by me. Johannes officially disavows all knowledge of this hack. -- JWL) Signed-off-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_wlan.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index ffdf4876121b..a68f97c39359 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -918,9 +918,12 @@ struct hostap_interface { /* * TX meta data - stored in skb->cb buffer, so this must not be increased over - * the 40-byte limit + * the 48-byte limit. + * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE + * TO SEE THE DAY. */ struct hostap_skb_tx_data { + unsigned int __padding_for_default_qdiscs; u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */ u8 rate; /* transmit rate */ #define HOSTAP_TX_FLAGS_WDS BIT(0) -- cgit v1.2.3 From 97a70e548bd97d5a46ae9d44f24aafcc013fd701 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 12 Nov 2008 23:22:35 +0100 Subject: x86, hibernate: fix breakage on x86_32 with CONFIG_NUMA set Impact: fix crash during hibernation on 32-bit NUMA The NUMA code on x86_32 creates special memory mapping that allows each node's pgdat to be located in this node's memory. For this purpose it allocates a memory area at the end of each node's memory and maps this area so that it is accessible with virtual addresses belonging to low memory. As a result, if there is high memory, these NUMA-allocated areas are physically located in high memory, although they are mapped to low memory addresses. Our hibernation code does not take that into account and for this reason hibernation fails on all x86_32 systems with CONFIG_NUMA=y and with high memory present. Fix this by adding a special mapping for the NUMA-allocated memory areas to the temporary page tables created during the last phase of resume. Signed-off-by: Rafael J. Wysocki Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mmzone_32.h | 4 ++++ arch/x86/mm/numa_32.c | 35 +++++++++++++++++++++++++++++++++++ arch/x86/power/hibernate_32.c | 4 ++++ 3 files changed, 43 insertions(+) diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index 485bdf059ffb..07f1af494ca5 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -34,10 +34,14 @@ static inline void get_memcfg_numa(void) extern int early_pfn_to_nid(unsigned long pfn); +extern void resume_map_numa_kva(pgd_t *pgd); + #else /* !CONFIG_NUMA */ #define get_memcfg_numa get_memcfg_numa_flat +static inline void resume_map_numa_kva(pgd_t *pgd) {} + #endif /* CONFIG_NUMA */ #ifdef CONFIG_DISCONTIGMEM diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 847c164725f4..8518c678d83f 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -222,6 +222,41 @@ static void __init remap_numa_kva(void) } } +#ifdef CONFIG_HIBERNATION +/** + * resume_map_numa_kva - add KVA mapping to the temporary page tables created + * during resume from hibernation + * @pgd_base - temporary resume page directory + */ +void resume_map_numa_kva(pgd_t *pgd_base) +{ + int node; + + for_each_online_node(node) { + unsigned long start_va, start_pfn, size, pfn; + + start_va = (unsigned long)node_remap_start_vaddr[node]; + start_pfn = node_remap_start_pfn[node]; + size = node_remap_size[node]; + + printk(KERN_DEBUG "%s: node %d\n", __FUNCTION__, node); + + for (pfn = 0; pfn < size; pfn += PTRS_PER_PTE) { + unsigned long vaddr = start_va + (pfn << PAGE_SHIFT); + pgd_t *pgd = pgd_base + pgd_index(vaddr); + pud_t *pud = pud_offset(pgd, vaddr); + pmd_t *pmd = pmd_offset(pud, vaddr); + + set_pmd(pmd, pfn_pmd(start_pfn + pfn, + PAGE_KERNEL_LARGE_EXEC)); + + printk(KERN_DEBUG "%s: %08lx -> pfn %08lx\n", + __FUNCTION__, vaddr, start_pfn + pfn); + } + } +} +#endif + static unsigned long calculate_numa_remap_pages(void) { int nid; diff --git a/arch/x86/power/hibernate_32.c b/arch/x86/power/hibernate_32.c index f2b6e3f11bfc..81197c62d5b3 100644 --- a/arch/x86/power/hibernate_32.c +++ b/arch/x86/power/hibernate_32.c @@ -12,6 +12,7 @@ #include #include #include +#include /* Defined in hibernate_asm_32.S */ extern int restore_image(void); @@ -127,6 +128,9 @@ static int resume_physical_mapping_init(pgd_t *pgd_base) } } } + + resume_map_numa_kva(pgd_base); + return 0; } -- cgit v1.2.3 From 604d20554883cf03f888440d58ea7c6d36899839 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 12 Nov 2008 23:26:14 +0100 Subject: x86: make NUMA on 32-bit depend on EXPERIMENTAL again My previous patch to make CONFIG_NUMA on x86_32 depend on BROKEN turned out to be unnecessary, after all, since the source of the hibernation vs CONFIG_NUMA problem turned out to be the fact that we didn't take the NUMA KVA remapping into account in the hibernation code. Signed-off-by: Rafael J. Wysocki Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 93224b569187..4cf0ab13d187 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -957,7 +957,7 @@ config ARCH_PHYS_ADDR_T_64BIT config NUMA bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)" depends on SMP - depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && BROKEN) + depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL) default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) help -- cgit v1.2.3 From e23a59e1ca6d177a57a7791b3629db93ff1d9813 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 12 Nov 2008 14:32:54 -0800 Subject: niu: Fix readq implementation when architecture does not provide one. This fixes a TX hang reported by Jesper Dangaard Brouer. When an architecutre cannot provide a fully functional 64-bit atomic readq/writeq, the driver must implement it's own. This is because only the driver can say whether doing something like using two 32-bit reads to implement the full 64-bit read will actually work properly. In particular one of the issues is whether the top 32-bits or the bottom 32-bits of the 64-bit register should be read first. There could be side effects, and in fact that is exactly the problem here. The TX_CS register has counters in the upper 32-bits and state bits in the lower 32-bits. A read clears the state bits. We would read the counter half before the state bit half. That first read would clear the state bits, and then the driver thinks that no interrupts are pending because the interrupt indication state bits are seen clear every time. Fix this by reading the bottom half before the upper half. Tested-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/niu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 9acb5d70a3ae..d8463b1c3df3 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -51,8 +51,7 @@ MODULE_VERSION(DRV_MODULE_VERSION); #ifndef readq static u64 readq(void __iomem *reg) { - return (((u64)readl(reg + 0x4UL) << 32) | - (u64)readl(reg)); + return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32); } static void writeq(u64 val, void __iomem *reg) -- cgit v1.2.3 From b2af2c1d3e4ddeea9d02c46d0df0c322cc7b7061 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 12 Nov 2008 16:23:44 -0800 Subject: bnx2: fix poll_controller to pass proper structures and check all rx queues Fix bnx2 so that netpoll works properly. Specifically: 1) Fix parameters to bnx2_interrupt to be a struct bnx2_napi rather than a struct net_device 2) Fix poll_controller method to check every queue in the rx case so frames aren't missed Signed-off-by: Neil Horman Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 430d430bce29..d07e3f148951 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7204,10 +7204,13 @@ static void poll_bnx2(struct net_device *dev) { struct bnx2 *bp = netdev_priv(dev); + int i; - disable_irq(bp->pdev->irq); - bnx2_interrupt(bp->pdev->irq, dev); - enable_irq(bp->pdev->irq); + for (i = 0; i < bp->irq_nvecs; i++) { + disable_irq(bp->irq_tbl[i].vector); + bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]); + enable_irq(bp->irq_tbl[i].vector); + } } #endif -- cgit v1.2.3 From 7526674de0c921e7f1e9b6f71a1f9d832557b554 Mon Sep 17 00:00:00 2001 From: Adam Litke Date: Wed, 12 Nov 2008 13:24:56 -0800 Subject: hugetlb: make unmap_ref_private multi-size-aware Oops. Part of the hugetlb private reservation code was not fully converted to use hstates. When a huge page must be unmapped from VMAs due to a failed COW, HPAGE_SIZE is used in the call to unmap_hugepage_range() regardless of the page size being used. This works if the VMA is using the default huge page size. Otherwise we might unmap too much, too little, or trigger a BUG_ON. Rare but serious -- fix it. Signed-off-by: Adam Litke Cc: Jon Tollefson Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index d143ab67be44..6058b53dcb89 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1796,6 +1796,7 @@ void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start, static int unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma, struct page *page, unsigned long address) { + struct hstate *h = hstate_vma(vma); struct vm_area_struct *iter_vma; struct address_space *mapping; struct prio_tree_iter iter; @@ -1805,7 +1806,7 @@ static int unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma, * vm_pgoff is in PAGE_SIZE units, hence the different calculation * from page cache lookup which is in HPAGE_SIZE units. */ - address = address & huge_page_mask(hstate_vma(vma)); + address = address & huge_page_mask(h); pgoff = ((address - vma->vm_start) >> PAGE_SHIFT) + (vma->vm_pgoff >> PAGE_SHIFT); mapping = (struct address_space *)page_private(page); @@ -1824,7 +1825,7 @@ static int unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma, */ if (!is_vma_resv_set(iter_vma, HPAGE_RESV_OWNER)) unmap_hugepage_range(iter_vma, - address, address + HPAGE_SIZE, + address, address + huge_page_size(h), page); } -- cgit v1.2.3 From 468cc0320ed083e26364d9febde2679d981ed6a6 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 12 Nov 2008 13:24:58 -0800 Subject: hwmon: applesmc: add support for Macbook 4 This patch adds accelerometer and temperature sensor support for Macbook 4. Signed-off-by: Henrik Rydberg Cc: Nicolas Boichat Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index be3285912cb7..488e45cd43d7 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -1280,7 +1280,7 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 4 }, /* iMac: temperature set 5 */ { .accelerometer = 0, .light = 0, .temperature_set = 5 }, -/* MacBook3: accelerometer and temperature set 6 */ +/* MacBook3, MacBook4: accelerometer and temperature set 6 */ { .accelerometer = 1, .light = 0, .temperature_set = 6 }, /* MacBook Air: accelerometer, backlight and temperature set 7 */ { .accelerometer = 1, .light = 1, .temperature_set = 7 }, @@ -1329,6 +1329,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") }, &applesmc_dmi_data[6]}, + { applesmc_dmi_match, "Apple MacBook 4", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4") }, + &applesmc_dmi_data[6]}, { applesmc_dmi_match, "Apple MacBook 5", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") }, -- cgit v1.2.3 From 722faccc7eb0a9b248fba3e7020b1c3770c41aef Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Nov 2008 13:24:59 -0800 Subject: atmel_lcdfb: change irq_base definition to allow error reporting Changed because old the definition of unsigned long cannot be negative. Signed-off-by: Nicolas Ferre Reported-by: Roel Kluin Cc: Haavard Skinnemoen Cc: Andrew Victor Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/video/atmel_lcdc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h index 6ad87f485992..0c864db1a466 100644 --- a/include/video/atmel_lcdc.h +++ b/include/video/atmel_lcdc.h @@ -38,7 +38,7 @@ struct atmel_lcdfb_info { spinlock_t lock; struct fb_info *info; void __iomem *mmio; - unsigned long irq_base; + int irq_base; struct work_struct task; unsigned int guard_time; -- cgit v1.2.3 From fe2d5ffc74a1de6a31e9fd65b65cce72d881edf7 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:25:00 -0800 Subject: Fix platform drivers that crash on suspend/resume It turns out that if one registers a struct platform_device, the platform device code expects that platform_device.device->driver points to a struct driver inside a struct platform_driver. This is not the case with the ipmi-si, ipmi-msghandler and ibmaem drivers, which causes the suspend/resume hook functions to jump off into nowhere, causing a crash. Make this assumption hold true for these three drivers. Signed-off-by: Darrick J. Wong Acked-by: Corey Minyard Cc: Jean Delvare Cc: Kay Sievers Cc: Greg KH Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 20 +++++++++++--------- drivers/char/ipmi/ipmi_si_intf.c | 16 +++++++++------- drivers/hwmon/ibmaem.c | 18 ++++++++++-------- 3 files changed, 30 insertions(+), 24 deletions(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 8a59aaa21be5..7a88dfd4427b 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -422,9 +422,11 @@ struct ipmi_smi { /** * The driver model view of the IPMI messaging driver. */ -static struct device_driver ipmidriver = { - .name = "ipmi", - .bus = &platform_bus_type +static struct platform_driver ipmidriver = { + .driver = { + .name = "ipmi", + .bus = &platform_bus_type + } }; static DEFINE_MUTEX(ipmidriver_mutex); @@ -2384,9 +2386,9 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, * representing the interfaced BMC already */ if (bmc->guid_set) - old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid); + old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid); else - old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver, + old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id); @@ -2416,7 +2418,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, snprintf(name, sizeof(name), "ipmi_bmc.%4.4x", bmc->id.product_id); - while (ipmi_find_bmc_prod_dev_id(&ipmidriver, + while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id)) { if (!warn_printed) { @@ -2446,7 +2448,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, " Unable to allocate platform device\n"); return -ENOMEM; } - bmc->dev->dev.driver = &ipmidriver; + bmc->dev->dev.driver = &ipmidriver.driver; dev_set_drvdata(&bmc->dev->dev, bmc); kref_init(&bmc->refcount); @@ -4247,7 +4249,7 @@ static int ipmi_init_msghandler(void) if (initialized) return 0; - rv = driver_register(&ipmidriver); + rv = driver_register(&ipmidriver.driver); if (rv) { printk(KERN_ERR PFX "Could not register IPMI driver\n"); return rv; @@ -4308,7 +4310,7 @@ static __exit void cleanup_ipmi(void) remove_proc_entry(proc_ipmi_root->name, NULL); #endif /* CONFIG_PROC_FS */ - driver_unregister(&ipmidriver); + driver_unregister(&ipmidriver.driver); initialized = 0; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 3123bf57ad91..3000135f2ead 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -114,9 +114,11 @@ static char *si_to_str[] = { "kcs", "smic", "bt" }; #define DEVICE_NAME "ipmi_si" -static struct device_driver ipmi_driver = { - .name = DEVICE_NAME, - .bus = &platform_bus_type +static struct platform_driver ipmi_driver = { + .driver = { + .name = DEVICE_NAME, + .bus = &platform_bus_type + } }; @@ -2868,7 +2870,7 @@ static int try_smi_init(struct smi_info *new_smi) goto out_err; } new_smi->dev = &new_smi->pdev->dev; - new_smi->dev->driver = &ipmi_driver; + new_smi->dev->driver = &ipmi_driver.driver; rv = platform_device_add(new_smi->pdev); if (rv) { @@ -2983,7 +2985,7 @@ static __devinit int init_ipmi_si(void) initialized = 1; /* Register the device drivers. */ - rv = driver_register(&ipmi_driver); + rv = driver_register(&ipmi_driver.driver); if (rv) { printk(KERN_ERR "init_ipmi_si: Unable to register driver: %d\n", @@ -3052,7 +3054,7 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_PPC_OF of_unregister_platform_driver(&ipmi_of_platform_driver); #endif - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); printk(KERN_WARNING "ipmi_si: Unable to find any System Interface(s)\n"); return -ENODEV; @@ -3151,7 +3153,7 @@ static __exit void cleanup_ipmi_si(void) cleanup_one_si(e); mutex_unlock(&smi_infos_lock); - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); } module_exit(cleanup_ipmi_si); diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 7b0ed5dea399..fe74609a7feb 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -88,9 +88,11 @@ static DEFINE_IDR(aem_idr); static DEFINE_SPINLOCK(aem_idr_lock); -static struct device_driver aem_driver = { - .name = DRVNAME, - .bus = &platform_bus_type, +static struct platform_driver aem_driver = { + .driver = { + .name = DRVNAME, + .bus = &platform_bus_type, + } }; struct aem_ipmi_data { @@ -583,7 +585,7 @@ static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle) data->pdev = platform_device_alloc(DRVNAME, data->id); if (!data->pdev) goto dev_err; - data->pdev->dev.driver = &aem_driver; + data->pdev->dev.driver = &aem_driver.driver; res = platform_device_add(data->pdev); if (res) @@ -716,7 +718,7 @@ static int aem_init_aem2_inst(struct aem_ipmi_data *probe, data->pdev = platform_device_alloc(DRVNAME, data->id); if (!data->pdev) goto dev_err; - data->pdev->dev.driver = &aem_driver; + data->pdev->dev.driver = &aem_driver.driver; res = platform_device_add(data->pdev); if (res) @@ -1085,7 +1087,7 @@ static int __init aem_init(void) { int res; - res = driver_register(&aem_driver); + res = driver_register(&aem_driver.driver); if (res) { printk(KERN_ERR "Can't register aem driver\n"); return res; @@ -1097,7 +1099,7 @@ static int __init aem_init(void) return 0; ipmi_reg_err: - driver_unregister(&aem_driver); + driver_unregister(&aem_driver.driver); return res; } @@ -1107,7 +1109,7 @@ static void __exit aem_exit(void) struct aem_data *p1, *next1; ipmi_smi_watcher_unregister(&driver_data.bmc_events); - driver_unregister(&aem_driver); + driver_unregister(&aem_driver.driver); list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) aem_delete(p1); } -- cgit v1.2.3 From f0f7e0dc7393268947dc3ed285defc3d375487b9 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:25:36 -0800 Subject: i5000-edac: hold reference to mci kobject It turns out that edac_mc_del_mc will kobject_put the last kref on the mci object. If the timing is just right, that means that the mci object is freed before before i5000_remove_one has a chance to free the resources associated with it, causing a null pointer exceptions when unloading the driver. Insert a kobject_{get,put} pair so that this doesn't happen. Signed-off-by: Darrick J. Wong Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/i5000_edac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index f0d9b415db50..d335086f4a26 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1381,6 +1381,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx) if (mci == NULL) return -ENOMEM; + kobject_get(&mci->edac_mci_kobj); debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); mci->dev = &pdev->dev; /* record ptr to the generic device */ @@ -1453,6 +1454,7 @@ fail1: i5000_put_devices(mci); fail0: + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); return -ENODEV; } @@ -1498,7 +1500,7 @@ static void __devexit i5000_remove_one(struct pci_dev *pdev) /* retrieve references to resources, and free those resources */ i5000_put_devices(mci); - + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); } -- cgit v1.2.3 From e33c3b5e172e2e45456f42fba47227d48745543f Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 12 Nov 2008 13:25:37 -0800 Subject: cpusets: update mems allowed in page allocator If all allowable memory is unreclaimable, it is possible to loop forever in the page allocator for ~__GFP_NORETRY allocations. During this time, it is also possible for a task's cpuset to expand its set of allowable nodes so that it now includes free memory. The cached copy of this set, current->mems_allowed, is stale, however, since there has not been a subsequent call to cpuset_update_task_memory_state(). The cached copy of the set of allowable nodes is now updated in the page allocator's slow path so the additional memory is available to get_page_from_freelist(). [akpm@linux-foundation.org: add comment] Signed-off-by: David Rientjes Cc: Paul Menage Cc: Christoph Lameter Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 54069e64e3a8..d8ac01474563 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1561,6 +1561,10 @@ nofail_alloc: /* We now go into synchronous reclaim */ cpuset_memory_pressure_bump(); + /* + * The task's cpuset might have expanded its set of allowable nodes + */ + cpuset_update_task_memory_state(); p->flags |= PF_MEMALLOC; reclaim_state.reclaimed_slab = 0; p->reclaim_state = &reclaim_state; -- cgit v1.2.3 From 0bcb6069a6e1af5c114a2a8873ec43ada8933596 Mon Sep 17 00:00:00 2001 From: John Linn Date: Wed, 12 Nov 2008 13:25:38 -0800 Subject: GPIO: add new Xilinx driver for powerpc This driver supports the Xilinx XPS GPIO IP core which has the typical GPIO features. Signed-off-by: Kiran Sutariya Signed-off-by: John Linn Cc: David Brownell Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Kumar Gala Cc: "Grant Likely" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/Kconfig | 8 ++ drivers/gpio/Makefile | 1 + drivers/gpio/xilinx_gpio.c | 235 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 244 insertions(+) create mode 100644 drivers/gpio/xilinx_gpio.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 7f2ee27fe76b..48f49d93d249 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -65,6 +65,14 @@ config GPIO_SYSFS # put expanders in the right section, in alphabetical order +comment "Memory mapped GPIO expanders:" + +config GPIO_XILINX + bool "Xilinx GPIO support" + depends on PPC_OF + help + Say yes here to support the Xilinx FPGA GPIO device + comment "I2C GPIO expanders:" config GPIO_MAX732X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 6aafdeb9ad03..49ac64e515e6 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o +obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c new file mode 100644 index 000000000000..3c1177abebd3 --- /dev/null +++ b/drivers/gpio/xilinx_gpio.c @@ -0,0 +1,235 @@ +/* + * Xilinx gpio driver + * + * Copyright 2008 Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Register Offset Definitions */ +#define XGPIO_DATA_OFFSET (0x0) /* Data register */ +#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */ + +struct xgpio_instance { + struct of_mm_gpio_chip mmchip; + u32 gpio_state; /* GPIO state shadow register */ + u32 gpio_dir; /* GPIO direction shadow register */ + spinlock_t gpio_lock; /* Lock used for synchronization */ +}; + +/** + * xgpio_get - Read the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function reads the specified signal of the GPIO device. It returns 0 if + * the signal clear, 1 if signal is set or negative value on error. + */ +static int xgpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + + return (in_be32(mm_gc->regs + XGPIO_DATA_OFFSET) >> gpio) & 1; +} + +/** + * xgpio_set - Write the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function writes the specified value in to the specified signal of the + * GPIO device. + */ +static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Write to GPIO signal and set its direction to output */ + if (val) + chip->gpio_state |= 1 << gpio; + else + chip->gpio_state &= ~(1 << gpio); + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); +} + +/** + * xgpio_dir_in - Set the direction of the specified GPIO signal as input. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function sets the direction of specified GPIO signal as input. + * It returns 0 if direction of GPIO signals is set as input otherwise it + * returns negative error value. + */ +static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Set the GPIO bit in shadow register and set direction as input */ + chip->gpio_dir |= (1 << gpio); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +/** + * xgpio_dir_out - Set the direction of the specified GPIO signal as output. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function sets the direction of specified GPIO signal as output. If all + * GPIO signals of GPIO chip is configured as input then it returns + * error otherwise it returns 0. + */ +static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Write state of GPIO signal */ + if (val) + chip->gpio_state |= 1 << gpio; + else + chip->gpio_state &= ~(1 << gpio); + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + + /* Clear the GPIO bit in shadow register and set direction as output */ + chip->gpio_dir &= (~(1 << gpio)); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +/** + * xgpio_save_regs - Set initial values of GPIO pins + * @mm_gc: pointer to memory mapped GPIO chip structure + */ +static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); +} + +/** + * xgpio_of_probe - Probe method for the GPIO device. + * @np: pointer to device tree node + * + * This function probes the GPIO device in the device tree. It initializes the + * driver data structure. It returns 0, if the driver is bound to the GPIO + * device, or a negative value if there is an error. + */ +static int __devinit xgpio_of_probe(struct device_node *np) +{ + struct xgpio_instance *chip; + struct of_gpio_chip *ofchip; + int status = 0; + const u32 *tree_info; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + ofchip = &chip->mmchip.of_gc; + + /* Update GPIO state shadow register with default value */ + tree_info = of_get_property(np, "xlnx,dout-default", NULL); + if (tree_info) + chip->gpio_state = *tree_info; + + /* Update GPIO direction shadow register with default value */ + chip->gpio_dir = 0xFFFFFFFF; /* By default, all pins are inputs */ + tree_info = of_get_property(np, "xlnx,tri-default", NULL); + if (tree_info) + chip->gpio_dir = *tree_info; + + /* Check device node and parent device node for device width */ + ofchip->gc.ngpio = 32; /* By default assume full GPIO controller */ + tree_info = of_get_property(np, "xlnx,gpio-width", NULL); + if (!tree_info) + tree_info = of_get_property(np->parent, + "xlnx,gpio-width", NULL); + if (tree_info) + ofchip->gc.ngpio = *tree_info; + + spin_lock_init(&chip->gpio_lock); + + ofchip->gpio_cells = 2; + ofchip->gc.direction_input = xgpio_dir_in; + ofchip->gc.direction_output = xgpio_dir_out; + ofchip->gc.get = xgpio_get; + ofchip->gc.set = xgpio_set; + + chip->mmchip.save_regs = xgpio_save_regs; + + /* Call the OF gpio helper to setup and register the GPIO device */ + status = of_mm_gpiochip_add(np, &chip->mmchip); + if (status) { + kfree(chip); + pr_err("%s: error in probe function with status %d\n", + np->full_name, status); + return status; + } + pr_info("XGpio: %s: registered\n", np->full_name); + return 0; +} + +static struct of_device_id xgpio_of_match[] __devinitdata = { + { .compatible = "xlnx,xps-gpio-1.00.a", }, + { /* end of list */ }, +}; + +static int __init xgpio_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, xgpio_of_match) + xgpio_of_probe(np); + + return 0; +} + +/* Make sure we get initialized before anyone else tries to use us */ +subsys_initcall(xgpio_init); +/* No exit call at the moment as we cannot unregister of GPIO chips */ + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Xilinx GPIO driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 687446760bd008df96655cb8c5900f8e48a7118c Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 12 Nov 2008 13:26:49 -0800 Subject: freezer_cg: remove task_lock from freezer_fork() In theory the task can be moved to another cgroup and the freezer will be freed right after task_lock is dropped, so the lock results in zero protection. But in the case of freezer_fork() no lock is needed, since the task is not in tasklist yet so it won't be moved to another cgroup, so task->cgroups won't be changed or invalidated. Signed-off-by: Li Zefan Cc: Matt Helsley Cc: Cedric Le Goater Cc: "Serge E. Hallyn" Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup_freezer.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index 7fa476f01d05..660590710409 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -184,9 +184,13 @@ static void freezer_fork(struct cgroup_subsys *ss, struct task_struct *task) { struct freezer *freezer; - task_lock(task); + /* + * No lock is needed, since the task isn't on tasklist yet, + * so it can't be moved to another cgroup, which means the + * freezer won't be removed and will be valid during this + * function call. + */ freezer = task_freezer(task); - task_unlock(task); spin_lock_irq(&freezer->lock); BUG_ON(freezer->state == CGROUP_FROZEN); -- cgit v1.2.3 From 3b1b3f6e57064aa8f91c290fe51cda4c74642902 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 12 Nov 2008 13:26:50 -0800 Subject: freezer_cg: disable writing freezer.state of root cgroup With this change, control file 'freezer.state' doesn't exist in root cgroup, making root cgroup unfreezable. I think it's reasonable to disallow freeze tasks in the root cgroup. And then we can avoid fork overhead when freezer subsystem is compiled but not used. Also make writing invalid value to freezer.state returns EINVAL rather than EIO. This is more consistent with other cgroup subsystem. Signed-off-by: Li Zefan Acked-by: Paul Menage Cc: Cedric Le Goater Cc: Paul Menage Cc: Matt Helsley Cc: "Serge E. Hallyn" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cgroups/freezer-subsystem.txt | 21 ++++++++++++--------- kernel/cgroup_freezer.c | 11 ++++++++++- 2 files changed, 22 insertions(+), 10 deletions(-) diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt index c50ab58b72eb..41f37fea1276 100644 --- a/Documentation/cgroups/freezer-subsystem.txt +++ b/Documentation/cgroups/freezer-subsystem.txt @@ -1,4 +1,4 @@ - The cgroup freezer is useful to batch job management system which start +The cgroup freezer is useful to batch job management system which start and stop sets of tasks in order to schedule the resources of a machine according to the desires of a system administrator. This sort of program is often used on HPC clusters to schedule access to the cluster as a @@ -6,7 +6,7 @@ whole. The cgroup freezer uses cgroups to describe the set of tasks to be started/stopped by the batch job management system. It also provides a means to start and stop the tasks composing the job. - The cgroup freezer will also be useful for checkpointing running groups +The cgroup freezer will also be useful for checkpointing running groups of tasks. The freezer allows the checkpoint code to obtain a consistent image of the tasks by attempting to force the tasks in a cgroup into a quiescent state. Once the tasks are quiescent another task can @@ -16,7 +16,7 @@ recoverable error occur. This also allows the checkpointed tasks to be migrated between nodes in a cluster by copying the gathered information to another node and restarting the tasks there. - Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping +Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping and resuming tasks in userspace. Both of these signals are observable from within the tasks we wish to freeze. While SIGSTOP cannot be caught, blocked, or ignored it can be seen by waiting or ptracing parent tasks. @@ -37,26 +37,29 @@ demonstrate this problem using nested bash shells: - This happens because bash can observe both signals and choose how it +This happens because bash can observe both signals and choose how it responds to them. - Another example of a program which catches and responds to these +Another example of a program which catches and responds to these signals is gdb. In fact any program designed to use ptrace is likely to have a problem with this method of stopping and resuming tasks. - In contrast, the cgroup freezer uses the kernel freezer code to +In contrast, the cgroup freezer uses the kernel freezer code to prevent the freeze/unfreeze cycle from becoming visible to the tasks being frozen. This allows the bash example above and gdb to run as expected. - The freezer subsystem in the container filesystem defines a file named +The freezer subsystem in the container filesystem defines a file named freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the cgroup. Subsequently writing "THAWED" will unfreeze the tasks in the cgroup. Reading will return the current state. +Note freezer.state doesn't exist in root cgroup, which means root cgroup +is non-freezable. + * Examples of usage : - # mkdir /containers/freezer + # mkdir /containers # mount -t cgroup -ofreezer freezer /containers # mkdir /containers/0 # echo $some_pid > /containers/0/tasks @@ -94,6 +97,6 @@ things happens: the freezer.state file 2) Userspace retries the freezing operation by writing "FROZEN" to the freezer.state file (writing "FREEZING" is not legal - and returns EIO) + and returns EINVAL) 3) The tasks that blocked the cgroup from entering the "FROZEN" state disappear from the cgroup's set of tasks. diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index 660590710409..fb249e2bcada 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -192,6 +192,13 @@ static void freezer_fork(struct cgroup_subsys *ss, struct task_struct *task) */ freezer = task_freezer(task); + /* + * The root cgroup is non-freezable, so we can skip the + * following check. + */ + if (!freezer->css.cgroup->parent) + return; + spin_lock_irq(&freezer->lock); BUG_ON(freezer->state == CGROUP_FROZEN); @@ -335,7 +342,7 @@ static int freezer_write(struct cgroup *cgroup, else if (strcmp(buffer, freezer_state_strs[CGROUP_FROZEN]) == 0) goal_state = CGROUP_FROZEN; else - return -EIO; + return -EINVAL; if (!cgroup_lock_live_group(cgroup)) return -ENODEV; @@ -354,6 +361,8 @@ static struct cftype files[] = { static int freezer_populate(struct cgroup_subsys *ss, struct cgroup *cgroup) { + if (!cgroup->parent) + return 0; return cgroup_add_files(cgroup, ss, files, ARRAY_SIZE(files)); } -- cgit v1.2.3 From a189d0350f387786b1fb5a5d19e3a5ab0bc0cceb Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 12 Nov 2008 13:26:51 -0800 Subject: kprobes: disable preempt for module_text_address() and kernel_text_address() __register_kprobe() can be preempted after checking probing address but before module_text_address() or try_module_get(), and in this interval the module can be unloaded. In that case, try_module_get(probed_mod) will access to invalid address, or kprobe will probe invalid address. This patch uses preempt_disable() to protect it and uses __module_text_address() and __kernel_text_address(). Signed-off-by: Lai Jiangshan Signed-off-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Cc: Hiroshi Shimamoto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kprobes.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 8b57a2597f21..f83c5e42fb07 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -613,30 +613,37 @@ static int __kprobes __register_kprobe(struct kprobe *p, return -EINVAL; p->addr = addr; - if (!kernel_text_address((unsigned long) p->addr) || - in_kprobes_functions((unsigned long) p->addr)) + preempt_disable(); + if (!__kernel_text_address((unsigned long) p->addr) || + in_kprobes_functions((unsigned long) p->addr)) { + preempt_enable(); return -EINVAL; + } p->mod_refcounted = 0; /* * Check if are we probing a module. */ - probed_mod = module_text_address((unsigned long) p->addr); + probed_mod = __module_text_address((unsigned long) p->addr); if (probed_mod) { - struct module *calling_mod = module_text_address(called_from); + struct module *calling_mod; + calling_mod = __module_text_address(called_from); /* * We must allow modules to probe themself and in this case * avoid incrementing the module refcount, so as to allow * unloading of self probing modules. */ if (calling_mod && calling_mod != probed_mod) { - if (unlikely(!try_module_get(probed_mod))) + if (unlikely(!try_module_get(probed_mod))) { + preempt_enable(); return -EINVAL; + } p->mod_refcounted = 1; } else probed_mod = NULL; } + preempt_enable(); p->nmissed = 0; INIT_LIST_HEAD(&p->list); @@ -718,6 +725,10 @@ static void __kprobes __unregister_kprobe_bottom(struct kprobe *p) struct kprobe *old_p; if (p->mod_refcounted) { + /* + * Since we've already incremented refcount, + * we don't need to disable preemption. + */ mod = module_text_address((unsigned long)p->addr); if (mod) module_put(mod); -- cgit v1.2.3 From 8891d6da17db0f9bb507d3a017f130b9970c3087 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Wed, 12 Nov 2008 13:26:53 -0800 Subject: mm: remove lru_add_drain_all() from the munlock path lockdep warns about following message at boot time on one of my test machine. Then, schedule_on_each_cpu() sholdn't be called when the task have mmap_sem. Actually, lru_add_drain_all() exist to prevent the unevictalble pages stay on reclaimable lru list. but currenct unevictable code can rescue unevictable pages although it stay on reclaimable list. So removing is better. In addition, this patch add lru_add_drain_all() to sys_mlock() and sys_mlockall(). it isn't must. but it reduce the failure of moving to unevictable list. its failure can rescue in vmscan later. but reducing is better. Note, if above rescuing happend, the Mlocked and the Unevictable field mismatching happend in /proc/meminfo. but it doesn't cause any real trouble. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.28-rc2-mm1 #2 ------------------------------------------------------- lvm/1103 is trying to acquire lock: (&cpu_hotplug.lock){--..}, at: [] get_online_cpus+0x29/0x50 but task is already holding lock: (&mm->mmap_sem){----}, at: [] sys_mlockall+0x4e/0xb0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){----}: [] check_noncircular+0x82/0x110 [] might_fault+0x4a/0xa0 [] validate_chain+0xb11/0x1070 [] might_fault+0x4a/0xa0 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 (*) grab mmap_sem [] might_fault+0x4a/0xa0 [] might_fault+0x7b/0xa0 [] might_fault+0x4a/0xa0 [] copy_to_user+0x30/0x60 [] filldir+0x7c/0xd0 [] sysfs_readdir+0x11a/0x1f0 (*) grab sysfs_mutex [] filldir+0x0/0xd0 [] filldir+0x0/0xd0 [] vfs_readdir+0x86/0xa0 (*) grab i_mutex [] sys_getdents+0x6b/0xc0 [] syscall_call+0x7/0xb [] 0xffffffff -> #2 (sysfs_mutex){--..}: [] check_noncircular+0x82/0x110 [] sysfs_addrm_start+0x2c/0xc0 [] validate_chain+0xb11/0x1070 [] sysfs_addrm_start+0x2c/0xc0 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 (*) grab sysfs_mutex [] sysfs_addrm_start+0x2c/0xc0 [] mutex_lock_nested+0xa5/0x2f0 [] sysfs_addrm_start+0x2c/0xc0 [] sysfs_addrm_start+0x2c/0xc0 [] sysfs_addrm_start+0x2c/0xc0 [] create_dir+0x3f/0x90 [] sysfs_create_dir+0x29/0x50 [] _spin_unlock+0x25/0x40 [] kobject_add_internal+0xcd/0x1a0 [] kobject_set_name_vargs+0x3a/0x50 [] kobject_init_and_add+0x2d/0x40 [] sysfs_slab_add+0xd2/0x180 [] sysfs_add_func+0x0/0x70 [] sysfs_add_func+0x5c/0x70 (*) grab slub_lock [] run_workqueue+0x172/0x200 [] run_workqueue+0x10f/0x200 [] worker_thread+0x0/0xf0 [] worker_thread+0x9c/0xf0 [] autoremove_wake_function+0x0/0x50 [] worker_thread+0x0/0xf0 [] kthread+0x42/0x70 [] kthread+0x0/0x70 [] kernel_thread_helper+0x7/0x1c [] 0xffffffff -> #1 (slub_lock){----}: [] check_noncircular+0xd/0x110 [] slab_cpuup_callback+0x11f/0x1d0 [] validate_chain+0xb11/0x1070 [] slab_cpuup_callback+0x11f/0x1d0 [] mark_lock+0x35d/0xd00 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 [] slab_cpuup_callback+0x11f/0x1d0 [] down_read+0x43/0x80 [] slab_cpuup_callback+0x11f/0x1d0 (*) grab slub_lock [] slab_cpuup_callback+0x11f/0x1d0 [] notifier_call_chain+0x3c/0x70 [] _cpu_up+0x84/0x110 [] cpu_up+0x4b/0x70 (*) grab cpu_hotplug.lock [] kernel_init+0x0/0x170 [] kernel_init+0xb5/0x170 [] kernel_init+0x0/0x170 [] kernel_thread_helper+0x7/0x1c [] 0xffffffff -> #0 (&cpu_hotplug.lock){--..}: [] validate_chain+0x5af/0x1070 [] dev_status+0x0/0x50 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 [] get_online_cpus+0x29/0x50 [] mutex_lock_nested+0xa5/0x2f0 [] get_online_cpus+0x29/0x50 [] get_online_cpus+0x29/0x50 [] lru_add_drain_per_cpu+0x0/0x10 [] get_online_cpus+0x29/0x50 (*) grab cpu_hotplug.lock [] schedule_on_each_cpu+0x32/0xe0 [] __mlock_vma_pages_range+0x85/0x2c0 [] __lock_acquire+0x285/0xa10 [] vma_merge+0xa9/0x1d0 [] mlock_fixup+0x180/0x200 [] do_mlockall+0x78/0x90 (*) grab mmap_sem [] sys_mlockall+0x81/0xb0 [] syscall_call+0x7/0xb [] 0xffffffff other info that might help us debug this: 1 lock held by lvm/1103: #0: (&mm->mmap_sem){----}, at: [] sys_mlockall+0x4e/0xb0 stack backtrace: Pid: 1103, comm: lvm Not tainted 2.6.28-rc2-mm1 #2 Call Trace: [] print_circular_bug_tail+0x7c/0xd0 [] validate_chain+0x5af/0x1070 [] dev_status+0x0/0x50 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 [] get_online_cpus+0x29/0x50 [] mutex_lock_nested+0xa5/0x2f0 [] get_online_cpus+0x29/0x50 [] get_online_cpus+0x29/0x50 [] lru_add_drain_per_cpu+0x0/0x10 [] get_online_cpus+0x29/0x50 [] schedule_on_each_cpu+0x32/0xe0 [] __mlock_vma_pages_range+0x85/0x2c0 [] __lock_acquire+0x285/0xa10 [] vma_merge+0xa9/0x1d0 [] mlock_fixup+0x180/0x200 [] do_mlockall+0x78/0x90 [] sys_mlockall+0x81/0xb0 [] syscall_call+0x7/0xb Signed-off-by: KOSAKI Motohiro Tested-by: Kamalesh Babulal Cc: Lee Schermerhorn Cc: Christoph Lameter Cc: Heiko Carstens Cc: Nick Piggin Cc: Hugh Dickins Cc: Rik van Riel Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mlock.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/mm/mlock.c b/mm/mlock.c index 008ea70b7afa..a6da2aee940a 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -66,14 +66,10 @@ void __clear_page_mlock(struct page *page) putback_lru_page(page); } else { /* - * Page not on the LRU yet. Flush all pagevecs and retry. + * We lost the race. the page already moved to evictable list. */ - lru_add_drain_all(); - if (!isolate_lru_page(page)) - putback_lru_page(page); - else if (PageUnevictable(page)) + if (PageUnevictable(page)) count_vm_event(UNEVICTABLE_PGSTRANDED); - } } @@ -187,8 +183,6 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma, if (vma->vm_flags & VM_WRITE) gup_flags |= GUP_FLAGS_WRITE; - lru_add_drain_all(); /* push cached pages to LRU */ - while (nr_pages > 0) { int i; @@ -251,8 +245,6 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma, ret = 0; } - lru_add_drain_all(); /* to update stats */ - return ret; /* count entire vma as locked_vm */ } @@ -546,6 +538,8 @@ asmlinkage long sys_mlock(unsigned long start, size_t len) if (!can_do_mlock()) return -EPERM; + lru_add_drain_all(); /* flush pagevec */ + down_write(¤t->mm->mmap_sem); len = PAGE_ALIGN(len + (start & ~PAGE_MASK)); start &= PAGE_MASK; @@ -612,6 +606,8 @@ asmlinkage long sys_mlockall(int flags) if (!can_do_mlock()) goto out; + lru_add_drain_all(); /* flush pagevec */ + down_write(¤t->mm->mmap_sem); lock_limit = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur; -- cgit v1.2.3 From afef80b3d87cae574b8c6b763505f25b74d254ef Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 12 Nov 2008 13:26:54 -0800 Subject: vfs: fix shrink_submounts In the last refactoring of shrink_submounts a variable was not completely renamed. So finish the renaming of mnt to m now. Without this if you attempt to mount an nfs mount that has both automatic nfs sub mounts on it, and has normal mounts on it. The unmount will succeed when it should not. Signed-off-by: Eric W. Biederman Cc: Alexey Dobriyan Cc: Al Viro Signed-off-by: Linus Torvalds --- fs/namespace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/namespace.c b/fs/namespace.c index cce46702d33c..65b3dc844c87 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1815,8 +1815,8 @@ static void shrink_submounts(struct vfsmount *mnt, struct list_head *umounts) while (!list_empty(&graveyard)) { m = list_first_entry(&graveyard, struct vfsmount, mnt_expire); - touch_mnt_namespace(mnt->mnt_ns); - umount_tree(mnt, 1, umounts); + touch_mnt_namespace(m->mnt_ns); + umount_tree(m, 1, umounts); } } } -- cgit v1.2.3 From b76f90b526737070302a127c710263e2ac707676 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Nov 2008 13:26:55 -0800 Subject: remove ratelimt() It mistakenly assumes that a static local in an inlined function is a kernel-wide singleton. It also has no callers, so let's remove it. Cc: Dave Young Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ratelimit.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h index 18a5b9ba9d40..00044b856453 100644 --- a/include/linux/ratelimit.h +++ b/include/linux/ratelimit.h @@ -17,11 +17,4 @@ struct ratelimit_state { struct ratelimit_state name = {interval, burst,} extern int __ratelimit(struct ratelimit_state *rs); - -static inline int ratelimit(void) -{ - static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, - DEFAULT_RATELIMIT_BURST); - return __ratelimit(&rs); -} #endif -- cgit v1.2.3 From b67ad18b06701b77ca8bfe9bb760c5c9e765e3cf Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Nov 2008 13:26:55 -0800 Subject: DOC: add printk-formats.txt Add printk-formats.txt so that we don't have to keep fixing the same things over and over again. Signed-off-by: Randy Dunlap Cc: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/00-INDEX | 2 ++ Documentation/printk-formats.txt | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) create mode 100644 Documentation/printk-formats.txt diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index edef85ce1195..50f99eab0e1f 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -290,6 +290,8 @@ powerpc/ - directory with info on using Linux with the PowerPC. preempt-locking.txt - info on locking under a preemptive kernel. +printk-formats.txt + - how to get printk format specifiers right prio_tree.txt - info on radix-priority-search-tree use for indexing vmas. ramdisk.txt diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt new file mode 100644 index 000000000000..1b5a5ddbc3ef --- /dev/null +++ b/Documentation/printk-formats.txt @@ -0,0 +1,35 @@ +If variable is of Type, use printk format specifier: +--------------------------------------------------------- + int %d or %x + unsigned int %u or %x + long %ld or %lx + unsigned long %lu or %lx + long long %lld or %llx + unsigned long long %llu or %llx + size_t %zu or %zx + ssize_t %zd or %zx + +Raw pointer value SHOULD be printed with %p. + +u64 SHOULD be printed with %llu/%llx, (unsigned long long): + + printk("%llu", (unsigned long long)u64_var); + +s64 SHOULD be printed with %lld/%llx, (long long): + + printk("%lld", (long long)s64_var); + +If is dependent on a config option for its size (e.g., sector_t, +blkcnt_t, phys_addr_t, resource_size_t) or is architecture-dependent +for its size (e.g., tcflag_t), use a format specifier of its largest +possible type and explicitly cast to it. Example: + + printk("test: sector number/total blocks: %llu/%llu\n", + (unsigned long long)sector, (unsigned long long)blockcount); + +Reminder: sizeof() result is of type size_t. + +Thank you for your cooperation and attention. + + +By Randy Dunlap -- cgit v1.2.3 From 084c304980f05833bc8a91b856af7dc7a7bb7d60 Mon Sep 17 00:00:00 2001 From: Marco Stornelli Date: Wed, 12 Nov 2008 13:26:56 -0800 Subject: DOC: update xip method info xip documentation updated: - change "get_xip_page" to "get_xip_mem"; - explain changed function parameters Signed-off-by: Marco Stornelli Signed-off-by: Randy Dunlap Cc: Carsten Otte Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/xip.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/Documentation/filesystems/xip.txt b/Documentation/filesystems/xip.txt index 3cc4010521a0..0466ee569278 100644 --- a/Documentation/filesystems/xip.txt +++ b/Documentation/filesystems/xip.txt @@ -39,10 +39,11 @@ The block device operation is optional, these block devices support it as of today: - dcssblk: s390 dcss block device driver -An address space operation named get_xip_page is used to retrieve reference -to a struct page. To address the target page, a reference to an address_space, -and a sector number is provided. A 3rd argument indicates whether the -function should allocate blocks if needed. +An address space operation named get_xip_mem is used to retrieve references +to a page frame number and a kernel address. To obtain these values a reference +to an address_space is provided. This function assigns values to the kmem and +pfn parameters. The third argument indicates whether the function should allocate +blocks if needed. This address space operation is mutually exclusive with readpage&writepage that do page cache read/write operations. -- cgit v1.2.3 From 7e036d040a28bf95255d7eb9faf0ffbba3677e99 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Nov 2008 13:26:57 -0800 Subject: kernel/kprobes.c: don't pad kretprobe_table_locks[] on uniprocessor builds We only need the cacheline padding on SMP kernels. Saves 6k: text data bss dec hex filename 5713 388 8840 14941 3a5d kernel/kprobes.o 5713 388 2632 8733 221d kernel/kprobes.o Acked-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index f83c5e42fb07..9f8a3f25259a 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -72,7 +72,7 @@ static bool kprobe_enabled; DEFINE_MUTEX(kprobe_mutex); /* Protects kprobe_table */ static DEFINE_PER_CPU(struct kprobe *, kprobe_instance) = NULL; static struct { - spinlock_t lock ____cacheline_aligned; + spinlock_t lock ____cacheline_aligned_in_smp; } kretprobe_table_locks[KPROBE_TABLE_SIZE]; static spinlock_t *kretprobe_table_lock_ptr(unsigned long hash) -- cgit v1.2.3 From 05a9bd46e49a9cbb09a0c61c901642a9911bf56e Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:26:57 -0800 Subject: adt7470: check input range when sysfs files are written Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/adt7470.c | 75 ++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 62 insertions(+), 13 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index d368d8f845e1..1311a595147e 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -137,6 +137,8 @@ I2C_CLIENT_INSMOD_1(adt7470); #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + struct adt7470_data { struct device *hwmon_dev; struct attribute_group attrs; @@ -353,7 +355,13 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -381,7 +389,13 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -430,11 +444,13 @@ static ssize_t set_fan_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_max[attr->index] = temp; @@ -465,11 +481,13 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -507,9 +525,12 @@ static ssize_t set_force_pwm_max(struct device *dev, { struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + mutex_lock(&data->lock); data->force_pwm_max = temp; reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); @@ -537,7 +558,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -564,7 +590,12 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -592,7 +623,12 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -630,7 +666,13 @@ static ssize_t set_pwm_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_tmin[attr->index] = temp; @@ -658,11 +700,14 @@ static ssize_t set_pwm_auto(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index); int pwm_auto_reg_mask; + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + if (attr->index % 2) pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK; else @@ -716,10 +761,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10)); int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); if (temp < 0) return temp; -- cgit v1.2.3 From 862343c4ea2ece307f25db1812637cff142d3263 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:26:58 -0800 Subject: adt7473: check inputs from sysfs writes Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/adt7473.c | 89 ++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 74 insertions(+), 15 deletions(-) diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index b9a8ea30c99c..18aa30866a6c 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -129,6 +129,8 @@ I2C_CLIENT_INSMOD_1(adt7473); #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + struct adt7473_data { struct device *hwmon_dev; struct attribute_group attrs; @@ -357,7 +359,12 @@ static ssize_t set_volt_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); mutex_lock(&data->lock); data->volt_min[attr->index] = volt; @@ -386,7 +393,12 @@ static ssize_t set_volt_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); mutex_lock(&data->lock); data->volt_max[attr->index] = volt; @@ -419,7 +431,8 @@ static int decode_temp(u8 twos_complement, u8 raw) static u8 encode_temp(u8 twos_complement, int cooked) { - return twos_complement ? cooked & 0xFF : cooked + 64; + u8 ret = twos_complement ? cooked & 0xFF : cooked + 64; + return SENSORS_LIMIT(ret, 0, 255); } static ssize_t show_temp_min(struct device *dev, @@ -441,7 +454,12 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -472,7 +490,12 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -515,11 +538,13 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -558,7 +583,10 @@ static ssize_t set_max_duty_at_crit(struct device *dev, u8 reg; struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; mutex_lock(&data->lock); data->max_duty_at_overheat = !!temp; @@ -587,7 +615,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -614,7 +647,12 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -642,7 +680,12 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -672,7 +715,12 @@ static ssize_t set_temp_tmax(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -703,7 +751,12 @@ static ssize_t set_temp_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -741,7 +794,10 @@ static ssize_t set_pwm_enable(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 0: @@ -805,7 +861,10 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 1: -- cgit v1.2.3 From 79b92f2bab0dc5ac70e8391548f75ac3268426e4 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:26:59 -0800 Subject: lm85: support adt7468 chips The adt7468 is a follow-on to the adt7463, so plumb in adt7468 support along the same code paths. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/lm85.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 46 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 3ff0285396fa..cfc1ee90f5a3 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -39,7 +39,8 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ -I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); +I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100, + emc6d102); /* The LM85 registers */ @@ -59,6 +60,12 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_COMPANY 0x3e #define LM85_REG_VERSTEP 0x3f + +#define ADT7468_REG_CFG5 0x7c +#define ADT7468_OFF64 0x01 +#define IS_ADT7468_OFF64(data) \ + ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64)) + /* These are the recognized values for the above regs */ #define LM85_COMPANY_NATIONAL 0x01 #define LM85_COMPANY_ANALOG_DEV 0x41 @@ -70,6 +77,8 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_VERSTEP_ADM1027 0x60 #define LM85_VERSTEP_ADT7463 0x62 #define LM85_VERSTEP_ADT7463C 0x6A +#define LM85_VERSTEP_ADT7468_1 0x71 +#define LM85_VERSTEP_ADT7468_2 0x72 #define LM85_VERSTEP_EMC6D100_A0 0x60 #define LM85_VERSTEP_EMC6D100_A1 0x61 #define LM85_VERSTEP_EMC6D102 0x65 @@ -306,6 +315,7 @@ struct lm85_data { u8 vid; /* Register value */ u8 vrm; /* VRM version */ u32 alarms; /* Register encoding, combined */ + u8 cfg5; /* Config Register 5 on ADT7468 */ struct lm85_autofan autofan[3]; struct lm85_zone zone[3]; }; @@ -685,6 +695,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + if (IS_ADT7468_OFF64(data)) + val += 64; + mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]); @@ -708,6 +721,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + if (IS_ADT7468_OFF64(data)) + val += 64; + mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]); @@ -1163,6 +1179,10 @@ static int lm85_detect(struct i2c_client *client, int kind, case LM85_VERSTEP_ADT7463C: kind = adt7463; break; + case LM85_VERSTEP_ADT7468_1: + case LM85_VERSTEP_ADT7468_2: + kind = adt7468; + break; } } else if (company == LM85_COMPANY_SMSC) { switch (verstep) { @@ -1195,6 +1215,9 @@ static int lm85_detect(struct i2c_client *client, int kind, case adt7463: type_name = "adt7463"; break; + case adt7468: + type_name = "adt7468"; + break; case emc6d100: type_name = "emc6d100"; break; @@ -1246,10 +1269,11 @@ static int lm85_probe(struct i2c_client *client, if (err) goto err_kfree; - /* The ADT7463 has an optional VRM 10 mode where pin 21 is used + /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used as a sixth digital VID input rather than an analog input. */ data->vid = lm85_read_value(client, LM85_REG_VID); - if (!(data->type == adt7463 && (data->vid & 0x80))) + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4))) goto err_remove_files; @@ -1357,7 +1381,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) * There are 2 additional resolution bits per channel and we * have room for 4, so we shift them to the left. */ - if (data->type == adm1027 || data->type == adt7463) { + if (data->type == adm1027 || data->type == adt7463 || + data->type == adt7468) { int ext1 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC1); int ext2 = lm85_read_value(client, @@ -1382,16 +1407,23 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_FAN(i)); } - if (!(data->type == adt7463 && (data->vid & 0x80))) { + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) { data->in[4] = lm85_read_value(client, LM85_REG_IN(4)); } + if (data->type == adt7468) + data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5); + for (i = 0; i <= 2; ++i) { data->temp[i] = lm85_read_value(client, LM85_REG_TEMP(i)); data->pwm[i] = lm85_read_value(client, LM85_REG_PWM(i)); + + if (IS_ADT7468_OFF64(data)) + data->temp[i] -= 64; } data->alarms = lm85_read_value(client, LM85_REG_ALARM1); @@ -1446,7 +1478,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_FAN_MIN(i)); } - if (!(data->type == adt7463 && (data->vid & 0x80))) { + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) { data->in_min[4] = lm85_read_value(client, LM85_REG_IN_MIN(4)); data->in_max[4] = lm85_read_value(client, @@ -1481,6 +1514,13 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_AFAN_LIMIT(i)); data->zone[i].critical = lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i)); + + if (IS_ADT7468_OFF64(data)) { + data->temp_min[i] -= 64; + data->temp_max[i] -= 64; + data->zone[i].limit -= 64; + data->zone[i].critical -= 64; + } } i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); -- cgit v1.2.3 From 50d7d5bf3168db5d04566dd7ffb9a820e9fdf484 Mon Sep 17 00:00:00 2001 From: Jean-Christophe Lallemand Date: Wed, 12 Nov 2008 13:27:00 -0800 Subject: atmel_spi: work-around required for new HW bug in AT91SAM9263 Rev.B SPI controller We're working with an AT91SAM9263 Rev B in our design and I experienced some inconsistency in spi-based touchscreen usage between our board and the Atmel evaluation kit we have that runs on a Rev A chip. The data was apparently delayed by 1 byte and got ridiculous data out of the touchscreen driver, very strange. As everything looked normal in the spi, touchscreen and dma logs, I contacted the Atmel support and they triggered me on a new HW bug that appeared in the Rev B SPI controller. The problem is that the SPI controller on the Rev B needs that the software reset is performed two times so that it's performed correctly. Applying the patch below solves the issue on my Rev B board. I've tested it as well on my Rev A evaluation kit and it has apparently no unwanted side effect, things continue to work as expected. Signed-off-by: Haavard Skinnemoen Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/atmel_spi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 02f9320f3efc..8abae4ad0fa5 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -766,6 +766,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) /* Initialize the hardware */ clk_enable(clk); spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); spi_writel(as, CR, SPI_BIT(SPIEN)); @@ -782,6 +783,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) out_reset_hw: spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ clk_disable(clk); free_irq(irq, master); out_unmap_regs: @@ -805,6 +807,7 @@ static int __exit atmel_spi_remove(struct platform_device *pdev) spin_lock_irq(&as->lock); as->stopping = 1; spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_readl(as, SR); spin_unlock_irq(&as->lock); -- cgit v1.2.3 From 6cdfcc275e40b89fb020da1088ead86a61d33115 Mon Sep 17 00:00:00 2001 From: Theodore Tso Date: Wed, 12 Nov 2008 13:27:01 -0800 Subject: ext3: Clean up outdated and incorrect comment for ext3_write_super() Signed-off-by: "Theodore Ts'o" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext3/super.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 5dec6d1356c4..f6c94f232ec1 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2375,12 +2375,9 @@ int ext3_force_commit(struct super_block *sb) /* * Ext3 always journals updates to the superblock itself, so we don't * have to propagate any other updates to the superblock on disk at this - * point. Just start an async writeback to get the buffers on their way - * to the disk. - * - * This implicitly triggers the writebehind on sync(). + * point. (We can probably nuke this function altogether, and remove + * any mention to sb->s_dirt in all of fs/ext3; eventual cleanup...) */ - static void ext3_write_super (struct super_block * sb) { if (mutex_trylock(&sb->s_lock) != 0) -- cgit v1.2.3 From 33c5d3d64589c5d379db5a5615735f6d08438369 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 12 Nov 2008 13:27:01 -0800 Subject: memcg: bugfix for memory hotplug The start pfn calculation in page_cgroup's memory hotplug notifier chain is wrong. Tested-by: Badari Pulavarty Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_cgroup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c index f59d797dc5a9..1223d927904d 100644 --- a/mm/page_cgroup.c +++ b/mm/page_cgroup.c @@ -165,7 +165,7 @@ int online_page_cgroup(unsigned long start_pfn, unsigned long start, end, pfn; int fail = 0; - start = start_pfn & (PAGES_PER_SECTION - 1); + start = start_pfn & ~(PAGES_PER_SECTION - 1); end = ALIGN(start_pfn + nr_pages, PAGES_PER_SECTION); for (pfn = start; !fail && pfn < end; pfn += PAGES_PER_SECTION) { @@ -188,7 +188,7 @@ int offline_page_cgroup(unsigned long start_pfn, { unsigned long start, end, pfn; - start = start_pfn & (PAGES_PER_SECTION - 1); + start = start_pfn & ~(PAGES_PER_SECTION - 1); end = ALIGN(start_pfn + nr_pages, PAGES_PER_SECTION); for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) -- cgit v1.2.3 From 455fbdd376c3ed3a5be8c039348896fdd87e9930 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 12 Nov 2008 13:27:02 -0800 Subject: LIS3LV02Dx Accelerometer driver This adds a driver to the accelerometer sensor found in several HP laptops (under the commercial names of "HP Mobile Data Protection System 3D" and "HP 3D driveguard"). It tries to have more or less the same interfaces as the hdaps and other accelerometer drivers: in sysfs and as a joystick. This driver was first written by Yan Burman. Eric Piel has updated it and slimed it up (including the removal of an interface to access to the free-fall feature of the sensor because it is not reliable enough for now). Pavel Machek removed few more features and switched locking from semaphore to mutex. Several people have contributed to the database of the axes. [eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API] Signed-off-by: Eric Piel Signed-off-by: Yan Burman Signed-off-by: Pavel Machek Cc: "Mark M. Hoffman" Signed-off-by: Eric Piel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/hwmon/lis3lv02d | 49 ++++ MAINTAINERS | 5 + drivers/hwmon/Kconfig | 19 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/lis3lv02d.c | 582 ++++++++++++++++++++++++++++++++++++++++++ drivers/hwmon/lis3lv02d.h | 149 +++++++++++ 6 files changed, 805 insertions(+) create mode 100644 Documentation/hwmon/lis3lv02d create mode 100644 drivers/hwmon/lis3lv02d.c create mode 100644 drivers/hwmon/lis3lv02d.h diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d new file mode 100644 index 000000000000..65dfb0c0fd67 --- /dev/null +++ b/Documentation/hwmon/lis3lv02d @@ -0,0 +1,49 @@ +Kernel driver lis3lv02d +================== + +Supported chips: + + * STMicroelectronics LIS3LV02DL and LIS3LV02DQ + +Author: + Yan Burman + Eric Piel + + +Description +----------- + +This driver provides support for the accelerometer found in various HP laptops +sporting the feature officially called "HP Mobile Data Protection System 3D" or +"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models +(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will +have their axis automatically oriented on standard way (eg: you can directly +play neverball). The accelerometer data is readable via +/sys/devices/platform/lis3lv02d. + +Sysfs attributes under /sys/devices/platform/lis3lv02d/: +position - 3D position that the accelerometer reports. Format: "(x,y,z)" +calibrate - read: values (x, y, z) that are used as the base for input class device operation. + write: forces the base to be recalibrated with the current position. +rate - reports the sampling rate of the accelerometer device in HZ + +This driver also provides an absolute input class device, allowing +the laptop to act as a pinball machine-esque joystick. + +Axes orientation +---------------- + +For better compatibility between the various laptops. The values reported by +the accelerometer are converted into a "standard" organisation of the axes +(aka "can play neverball out of the box"): + * When the laptop is horizontal the position reported is about 0 for X and Y +and a positive value for Z + * If the left side is elevated, X increases (becomes positive) + * If the front side (where the touchpad is) is elevated, Y decreases (becomes negative) + * If the laptop is put upside-down, Z becomes negative + +If your laptop model is not recognized (cf "dmesg"), you can send an email to the +authors to add it to the database. When reporting a new laptop, please include +the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position +in these four cases. + diff --git a/MAINTAINERS b/MAINTAINERS index 272d04e95faa..8e0777fae3ce 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2703,6 +2703,11 @@ P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net S: Maintained +LIS3LV02D ACCELEROMETER DRIVER +P: Eric Piel +M: eric.piel@tremplin-utc.net +S: Maintained + LM83 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 6de1e0ffd391..1c44f5c47aab 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -825,6 +825,25 @@ config SENSORS_HDAPS Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. +config SENSORS_LIS3LV02D + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" + depends on ACPI && INPUT + default n + help + This driver provides support for the LIS3LV02Dx accelerometer. In + particular, it can be found in a number of HP laptops, which have the + "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such + systems the driver should load automatically (via ACPI). The + accelerometer might also be found in other systems, connected via SPI + or I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + This driver can also be built as a module. If so, the module + will be called lis3lv02d. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 042d5a78622e..e0d90a68bea0 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o +obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM75) += lm75.o diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c new file mode 100644 index 000000000000..752b5c44df9c --- /dev/null +++ b/drivers/hwmon/lis3lv02d.c @@ -0,0 +1,582 @@ +/* + * lis3lv02d.c - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "lis3lv02d.h" + +#define DRIVER_NAME "lis3lv02d" +#define ACPI_MDPS_CLASS "accelerometer" + +/* joystick device poll interval in milliseconds */ +#define MDPS_POLL_INTERVAL 50 +/* + * The sensor can also generate interrupts (DRDY) but it's pretty pointless + * because their are generated even if the data do not change. So it's better + * to keep the interrupt for the free-fall event. The values are updated at + * 40Hz (at the lowest frequency), but as it can be pretty time consuming on + * some low processor, we poll the sensor only at 20Hz... enough for the + * joystick. + */ + +/* Maximum value our axis may get for the input device (signed 12 bits) */ +#define MDPS_MAX_VAL 2048 + +struct axis_conversion { + s8 x; + s8 y; + s8 z; +}; + +struct acpi_lis3lv02d { + struct acpi_device *device; /* The ACPI device */ + struct input_dev *idev; /* input device */ + struct task_struct *kthread; /* kthread for input */ + struct mutex lock; + struct platform_device *pdev; /* platform device */ + atomic_t count; /* interrupt count after last read */ + int xcalib; /* calibrated null value for x */ + int ycalib; /* calibrated null value for y */ + int zcalib; /* calibrated null value for z */ + unsigned char is_on; /* whether the device is on or off */ + unsigned char usage; /* usage counter */ + struct axis_conversion ac; /* hw -> logical axis */ +}; + +static struct acpi_lis3lv02d adev; + +static int lis3lv02d_remove_fs(void); +static int lis3lv02d_add_fs(struct acpi_device *device); + +/* For automatic insertion of the module */ +static struct acpi_device_id lis3lv02d_device_ids[] = { + {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */ + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids); + +/** + * lis3lv02d_acpi_init - ACPI _INI method: initialize the device. + * @handle: the handle of the device + * + * Returns AE_OK on success. + */ +static inline acpi_status lis3lv02d_acpi_init(acpi_handle handle) +{ + return acpi_evaluate_object(handle, METHOD_NAME__INI, NULL, NULL); +} + +/** + * lis3lv02d_acpi_read - ACPI ALRD method: read a register + * @handle: the handle of the device + * @reg: the register to read + * @ret: result of the operation + * + * Returns AE_OK on success. + */ +static acpi_status lis3lv02d_acpi_read(acpi_handle handle, int reg, u8 *ret) +{ + union acpi_object arg0 = { ACPI_TYPE_INTEGER }; + struct acpi_object_list args = { 1, &arg0 }; + unsigned long long lret; + acpi_status status; + + arg0.integer.value = reg; + + status = acpi_evaluate_integer(handle, "ALRD", &args, &lret); + *ret = lret; + return status; +} + +/** + * lis3lv02d_acpi_write - ACPI ALWR method: write to a register + * @handle: the handle of the device + * @reg: the register to write to + * @val: the value to write + * + * Returns AE_OK on success. + */ +static acpi_status lis3lv02d_acpi_write(acpi_handle handle, int reg, u8 val) +{ + unsigned long long ret; /* Not used when writting */ + union acpi_object in_obj[2]; + struct acpi_object_list args = { 2, in_obj }; + + in_obj[0].type = ACPI_TYPE_INTEGER; + in_obj[0].integer.value = reg; + in_obj[1].type = ACPI_TYPE_INTEGER; + in_obj[1].integer.value = val; + + return acpi_evaluate_integer(handle, "ALWR", &args, &ret); +} + +static s16 lis3lv02d_read_16(acpi_handle handle, int reg) +{ + u8 lo, hi; + + lis3lv02d_acpi_read(handle, reg, &lo); + lis3lv02d_acpi_read(handle, reg + 1, &hi); + /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ + return (s16)((hi << 8) | lo); +} + +/** + * lis3lv02d_get_axis - For the given axis, give the value converted + * @axis: 1,2,3 - can also be negative + * @hw_values: raw values returned by the hardware + * + * Returns the converted value. + */ +static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3]) +{ + if (axis > 0) + return hw_values[axis - 1]; + else + return -hw_values[-axis - 1]; +} + +/** + * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer + * @handle: the handle to the device + * @x: where to store the X axis value + * @y: where to store the Y axis value + * @z: where to store the Z axis value + * + * Note that 40Hz input device can eat up about 10% CPU at 800MHZ + */ +static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) +{ + int position[3]; + + position[0] = lis3lv02d_read_16(handle, OUTX_L); + position[1] = lis3lv02d_read_16(handle, OUTY_L); + position[2] = lis3lv02d_read_16(handle, OUTZ_L); + + *x = lis3lv02d_get_axis(adev.ac.x, position); + *y = lis3lv02d_get_axis(adev.ac.y, position); + *z = lis3lv02d_get_axis(adev.ac.z, position); +} + +static inline void lis3lv02d_poweroff(acpi_handle handle) +{ + adev.is_on = 0; + /* disable X,Y,Z axis and power down */ + lis3lv02d_acpi_write(handle, CTRL_REG1, 0x00); +} + +static void lis3lv02d_poweron(acpi_handle handle) +{ + u8 val; + + adev.is_on = 1; + lis3lv02d_acpi_init(handle); + lis3lv02d_acpi_write(handle, FF_WU_CFG, 0); + /* + * BDU: LSB and MSB values are not updated until both have been read. + * So the value read will always be correct. + * IEN: Interrupt for free-fall and DD, not for data-ready. + */ + lis3lv02d_acpi_read(handle, CTRL_REG2, &val); + val |= CTRL2_BDU | CTRL2_IEN; + lis3lv02d_acpi_write(handle, CTRL_REG2, val); +} + +#ifdef CONFIG_PM +static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state) +{ + /* make sure the device is off when we suspend */ + lis3lv02d_poweroff(device->handle); + return 0; +} + +static int lis3lv02d_resume(struct acpi_device *device) +{ + /* put back the device in the right state (ACPI might turn it on) */ + mutex_lock(&adev.lock); + if (adev.usage > 0) + lis3lv02d_poweron(device->handle); + else + lis3lv02d_poweroff(device->handle); + mutex_unlock(&adev.lock); + return 0; +} +#else +#define lis3lv02d_suspend NULL +#define lis3lv02d_resume NULL +#endif + + +/* + * To be called before starting to use the device. It makes sure that the + * device will always be on until a call to lis3lv02d_decrease_use(). Not to be + * used from interrupt context. + */ +static void lis3lv02d_increase_use(struct acpi_lis3lv02d *dev) +{ + mutex_lock(&dev->lock); + dev->usage++; + if (dev->usage == 1) { + if (!dev->is_on) + lis3lv02d_poweron(dev->device->handle); + } + mutex_unlock(&dev->lock); +} + +/* + * To be called whenever a usage of the device is stopped. + * It will make sure to turn off the device when there is not usage. + */ +static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev) +{ + mutex_lock(&dev->lock); + dev->usage--; + if (dev->usage == 0) + lis3lv02d_poweroff(dev->device->handle); + mutex_unlock(&dev->lock); +} + +/** + * lis3lv02d_joystick_kthread - Kthread polling function + * @data: unused - here to conform to threadfn prototype + */ +static int lis3lv02d_joystick_kthread(void *data) +{ + int x, y, z; + + while (!kthread_should_stop()) { + lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z); + input_report_abs(adev.idev, ABS_X, x - adev.xcalib); + input_report_abs(adev.idev, ABS_Y, y - adev.ycalib); + input_report_abs(adev.idev, ABS_Z, z - adev.zcalib); + + input_sync(adev.idev); + + try_to_freeze(); + msleep_interruptible(MDPS_POLL_INTERVAL); + } + + return 0; +} + +static int lis3lv02d_joystick_open(struct input_dev *input) +{ + lis3lv02d_increase_use(&adev); + adev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d"); + if (IS_ERR(adev.kthread)) { + lis3lv02d_decrease_use(&adev); + return PTR_ERR(adev.kthread); + } + + return 0; +} + +static void lis3lv02d_joystick_close(struct input_dev *input) +{ + kthread_stop(adev.kthread); + lis3lv02d_decrease_use(&adev); +} + + +static inline void lis3lv02d_calibrate_joystick(void) +{ + lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib); +} + +static int lis3lv02d_joystick_enable(void) +{ + int err; + + if (adev.idev) + return -EINVAL; + + adev.idev = input_allocate_device(); + if (!adev.idev) + return -ENOMEM; + + lis3lv02d_calibrate_joystick(); + + adev.idev->name = "ST LIS3LV02DL Accelerometer"; + adev.idev->phys = DRIVER_NAME "/input0"; + adev.idev->id.bustype = BUS_HOST; + adev.idev->id.vendor = 0; + adev.idev->dev.parent = &adev.pdev->dev; + adev.idev->open = lis3lv02d_joystick_open; + adev.idev->close = lis3lv02d_joystick_close; + + set_bit(EV_ABS, adev.idev->evbit); + input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + + err = input_register_device(adev.idev); + if (err) { + input_free_device(adev.idev); + adev.idev = NULL; + } + + return err; +} + +static void lis3lv02d_joystick_disable(void) +{ + if (!adev.idev) + return; + + input_unregister_device(adev.idev); + adev.idev = NULL; +} + + +/* + * Initialise the accelerometer and the various subsystems. + * Should be rather independant of the bus system. + */ +static int lis3lv02d_init_device(struct acpi_lis3lv02d *dev) +{ + mutex_init(&dev->lock); + lis3lv02d_add_fs(dev->device); + lis3lv02d_increase_use(dev); + + if (lis3lv02d_joystick_enable()) + printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); + + lis3lv02d_decrease_use(dev); + return 0; +} + +static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi) +{ + adev.ac = *((struct axis_conversion *)dmi->driver_data); + printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident); + + return 1; +} + +/* Represents, for each axis seen by userspace, the corresponding hw axis (+1). + * If the value is negative, the opposite of the hw value is used. */ +static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3}; +static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3}; +static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3}; +static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3}; +static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3}; + +#define AXIS_DMI_MATCH(_ident, _name, _axis) { \ + .ident = _ident, \ + .callback = lis3lv02d_dmi_matched, \ + .matches = { \ + DMI_MATCH(DMI_PRODUCT_NAME, _name) \ + }, \ + .driver_data = &lis3lv02d_axis_##_axis \ +} +static struct dmi_system_id lis3lv02d_dmi_ids[] = { + /* product names are truncated to match all kinds of a same model */ + AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted), + AXIS_DMI_MATCH("NC84x0", "HP Compaq nc84", z_inverted), + AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted), + AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted), + AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted), + AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted), + AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), + { NULL, } +/* Laptop models without axis info (yet): + * "NC651xx" "HP Compaq 651" + * "NC671xx" "HP Compaq 671" + * "NC6910" "HP Compaq 6910" + * HP Compaq 8710x Notebook PC / Mobile Workstation + * "NC2400" "HP Compaq nc2400" + * "NX74x0" "HP Compaq nx74" + * "NX6325" "HP Compaq nx6325" + * "NC4400" "HP Compaq nc4400" + */ +}; + +static int lis3lv02d_add(struct acpi_device *device) +{ + u8 val; + + if (!device) + return -EINVAL; + + adev.device = device; + strcpy(acpi_device_name(device), DRIVER_NAME); + strcpy(acpi_device_class(device), ACPI_MDPS_CLASS); + device->driver_data = &adev; + + lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val); + if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) { + printk(KERN_ERR DRIVER_NAME + ": Accelerometer chip not LIS3LV02D{L,Q}\n"); + } + + /* If possible use a "standard" axes order */ + if (dmi_check_system(lis3lv02d_dmi_ids) == 0) { + printk(KERN_INFO DRIVER_NAME ": laptop model unknown, " + "using default axes configuration\n"); + adev.ac = lis3lv02d_axis_normal; + } + + return lis3lv02d_init_device(&adev); +} + +static int lis3lv02d_remove(struct acpi_device *device, int type) +{ + if (!device) + return -EINVAL; + + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(device->handle); + + return lis3lv02d_remove_fs(); +} + + +/* Sysfs stuff */ +static ssize_t lis3lv02d_position_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int x, y, z; + + lis3lv02d_increase_use(&adev); + lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z); + lis3lv02d_decrease_use(&adev); + return sprintf(buf, "(%d,%d,%d)\n", x, y, z); +} + +static ssize_t lis3lv02d_calibrate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "(%d,%d,%d)\n", adev.xcalib, adev.ycalib, adev.zcalib); +} + +static ssize_t lis3lv02d_calibrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + lis3lv02d_increase_use(&adev); + lis3lv02d_calibrate_joystick(); + lis3lv02d_decrease_use(&adev); + return count; +} + +/* conversion btw sampling rate and the register values */ +static int lis3lv02dl_df_val[4] = {40, 160, 640, 2560}; +static ssize_t lis3lv02d_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u8 ctrl; + int val; + + lis3lv02d_increase_use(&adev); + lis3lv02d_acpi_read(adev.device->handle, CTRL_REG1, &ctrl); + lis3lv02d_decrease_use(&adev); + val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4; + return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]); +} + +static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL); +static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, lis3lv02d_calibrate_show, + lis3lv02d_calibrate_store); +static DEVICE_ATTR(rate, S_IRUGO, lis3lv02d_rate_show, NULL); + +static struct attribute *lis3lv02d_attributes[] = { + &dev_attr_position.attr, + &dev_attr_calibrate.attr, + &dev_attr_rate.attr, + NULL +}; + +static struct attribute_group lis3lv02d_attribute_group = { + .attrs = lis3lv02d_attributes +}; + +static int lis3lv02d_add_fs(struct acpi_device *device) +{ + adev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); + if (IS_ERR(adev.pdev)) + return PTR_ERR(adev.pdev); + + return sysfs_create_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group); +} + +static int lis3lv02d_remove_fs(void) +{ + sysfs_remove_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group); + platform_device_unregister(adev.pdev); + return 0; +} + +/* For the HP MDPS aka 3D Driveguard */ +static struct acpi_driver lis3lv02d_driver = { + .name = DRIVER_NAME, + .class = ACPI_MDPS_CLASS, + .ids = lis3lv02d_device_ids, + .ops = { + .add = lis3lv02d_add, + .remove = lis3lv02d_remove, + .suspend = lis3lv02d_suspend, + .resume = lis3lv02d_resume, + } +}; + +static int __init lis3lv02d_init_module(void) +{ + int ret; + + if (acpi_disabled) + return -ENODEV; + + ret = acpi_bus_register_driver(&lis3lv02d_driver); + if (ret < 0) + return ret; + + printk(KERN_INFO DRIVER_NAME " driver loaded.\n"); + + return 0; +} + +static void __exit lis3lv02d_exit_module(void) +{ + acpi_bus_unregister_driver(&lis3lv02d_driver); +} + +MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); +MODULE_AUTHOR("Yan Burman and Eric Piel"); +MODULE_LICENSE("GPL"); + +module_init(lis3lv02d_init_module); +module_exit(lis3lv02d_exit_module); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h new file mode 100644 index 000000000000..330cfc60e948 --- /dev/null +++ b/drivers/hwmon/lis3lv02d.h @@ -0,0 +1,149 @@ +/* + * lis3lv02d.h - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to + * be connected via SPI. There exists also several similar chips (such as LIS302DL or + * LIS3L02DQ) but not in the HP laptops and they have slightly different registers. + * They can also be connected via I²C. + */ + +#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */ +#define LIS302DL_ID 0x3B /* Also the LIS202DL! */ + +enum lis3lv02d_reg { + WHO_AM_I = 0x0F, + OFFSET_X = 0x16, + OFFSET_Y = 0x17, + OFFSET_Z = 0x18, + GAIN_X = 0x19, + GAIN_Y = 0x1A, + GAIN_Z = 0x1B, + CTRL_REG1 = 0x20, + CTRL_REG2 = 0x21, + CTRL_REG3 = 0x22, + HP_FILTER_RESET = 0x23, + STATUS_REG = 0x27, + OUTX_L = 0x28, + OUTX_H = 0x29, + OUTY_L = 0x2A, + OUTY_H = 0x2B, + OUTZ_L = 0x2C, + OUTZ_H = 0x2D, + FF_WU_CFG = 0x30, + FF_WU_SRC = 0x31, + FF_WU_ACK = 0x32, + FF_WU_THS_L = 0x34, + FF_WU_THS_H = 0x35, + FF_WU_DURATION = 0x36, + DD_CFG = 0x38, + DD_SRC = 0x39, + DD_ACK = 0x3A, + DD_THSI_L = 0x3C, + DD_THSI_H = 0x3D, + DD_THSE_L = 0x3E, + DD_THSE_H = 0x3F, +}; + +enum lis3lv02d_ctrl1 { + CTRL1_Xen = 0x01, + CTRL1_Yen = 0x02, + CTRL1_Zen = 0x04, + CTRL1_ST = 0x08, + CTRL1_DF0 = 0x10, + CTRL1_DF1 = 0x20, + CTRL1_PD0 = 0x40, + CTRL1_PD1 = 0x80, +}; +enum lis3lv02d_ctrl2 { + CTRL2_DAS = 0x01, + CTRL2_SIM = 0x02, + CTRL2_DRDY = 0x04, + CTRL2_IEN = 0x08, + CTRL2_BOOT = 0x10, + CTRL2_BLE = 0x20, + CTRL2_BDU = 0x40, /* Block Data Update */ + CTRL2_FS = 0x80, /* Full Scale selection */ +}; + + +enum lis3lv02d_ctrl3 { + CTRL3_CFS0 = 0x01, + CTRL3_CFS1 = 0x02, + CTRL3_FDS = 0x10, + CTRL3_HPFF = 0x20, + CTRL3_HPDD = 0x40, + CTRL3_ECK = 0x80, +}; + +enum lis3lv02d_status_reg { + STATUS_XDA = 0x01, + STATUS_YDA = 0x02, + STATUS_ZDA = 0x04, + STATUS_XYZDA = 0x08, + STATUS_XOR = 0x10, + STATUS_YOR = 0x20, + STATUS_ZOR = 0x40, + STATUS_XYZOR = 0x80, +}; + +enum lis3lv02d_ff_wu_cfg { + FF_WU_CFG_XLIE = 0x01, + FF_WU_CFG_XHIE = 0x02, + FF_WU_CFG_YLIE = 0x04, + FF_WU_CFG_YHIE = 0x08, + FF_WU_CFG_ZLIE = 0x10, + FF_WU_CFG_ZHIE = 0x20, + FF_WU_CFG_LIR = 0x40, + FF_WU_CFG_AOI = 0x80, +}; + +enum lis3lv02d_ff_wu_src { + FF_WU_SRC_XL = 0x01, + FF_WU_SRC_XH = 0x02, + FF_WU_SRC_YL = 0x04, + FF_WU_SRC_YH = 0x08, + FF_WU_SRC_ZL = 0x10, + FF_WU_SRC_ZH = 0x20, + FF_WU_SRC_IA = 0x40, +}; + +enum lis3lv02d_dd_cfg { + DD_CFG_XLIE = 0x01, + DD_CFG_XHIE = 0x02, + DD_CFG_YLIE = 0x04, + DD_CFG_YHIE = 0x08, + DD_CFG_ZLIE = 0x10, + DD_CFG_ZHIE = 0x20, + DD_CFG_LIR = 0x40, + DD_CFG_IEND = 0x80, +}; + +enum lis3lv02d_dd_src { + DD_SRC_XL = 0x01, + DD_SRC_XH = 0x02, + DD_SRC_YL = 0x04, + DD_SRC_YH = 0x08, + DD_SRC_ZL = 0x10, + DD_SRC_ZH = 0x20, + DD_SRC_IA = 0x40, +}; + -- cgit v1.2.3 From c0b4e3ab0c769913438aeb078535ff117eeba5fb Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:27:03 -0800 Subject: adt7462: new hwmon driver New driver to play with. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/hwmon/adt7462 | 67 ++ drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/adt7462.c | 2002 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 2080 insertions(+) create mode 100644 Documentation/hwmon/adt7462 create mode 100644 drivers/hwmon/adt7462.c diff --git a/Documentation/hwmon/adt7462 b/Documentation/hwmon/adt7462 new file mode 100644 index 000000000000..ec660b328275 --- /dev/null +++ b/Documentation/hwmon/adt7462 @@ -0,0 +1,67 @@ +Kernel driver adt7462 +====================== + +Supported chips: + * Analog Devices ADT7462 + Prefix: 'adt7462' + Addresses scanned: I2C 0x58, 0x5C + Datasheet: Publicly available at the Analog Devices website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Analog Devices ADT7462 chip family. + +This chip is a bit of a beast. It has 8 counters for measuring fan speed. It +can also measure 13 voltages or 4 temperatures, or various combinations of the +two. See the chip documentation for more details about the exact set of +configurations. This driver does not allow one to configure the chip; that is +left to the system designer. + +A sophisticated control system for the PWM outputs is designed into the ADT7462 +that allows fan speed to be adjusted automatically based on any of the three +temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT7462 will adjust the PWM outputs in +response to the measured temperatures without further host intervention. This +feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (voltage, temperature, fan speed) has +corresponding high/low limit values. The ADT7462 will signal an ALARM if +any measured value exceeds either limit. + +The ADT7462 samples all inputs continuously. The driver will not read +the registers more often than once every other second. Further, +configuration data is only read once per minute. + +Special Features +---------------- + +The ADT7462 have a 10-bit ADC and can therefore measure temperatures +with 0.25 degC resolution. + +The Analog Devices datasheet is very detailed and describes a procedure for +determining an optimal configuration for the automatic PWM control. + +The driver will report sensor labels when it is able to determine that +information from the configuration registers. + +Configuration Notes +------------------- + +Besides standard interfaces driver adds the following: + +* PWM Control + +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - + +point1: Set the pwm speed at a lower temperature bound. +point2: Set the pwm speed at a higher temperature bound. + +The ADT7462 will scale the pwm between the lower and higher pwm speed when +the temperature is between the two temperature boundaries. PWM values range +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the +temperature sensor associated with the PWM control exceeds temp#_max. + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 1c44f5c47aab..c709e821f04b 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -159,6 +159,16 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7462 + tristate "Analog Devices ADT7462" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7462 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7462. + config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index e0d90a68bea0..58fc5be5355d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o +obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c new file mode 100644 index 000000000000..66107b4dc12a --- /dev/null +++ b/drivers/hwmon/adt7462.c @@ -0,0 +1,2002 @@ +/* + * A hwmon driver for the Analog Devices ADT7462 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(adt7462); + +/* ADT7462 registers */ +#define ADT7462_REG_DEVICE 0x3D +#define ADT7462_REG_VENDOR 0x3E +#define ADT7462_REG_REVISION 0x3F + +#define ADT7462_REG_MIN_TEMP_BASE_ADDR 0x44 +#define ADT7462_REG_MIN_TEMP_MAX_ADDR 0x47 +#define ADT7462_REG_MAX_TEMP_BASE_ADDR 0x48 +#define ADT7462_REG_MAX_TEMP_MAX_ADDR 0x4B +#define ADT7462_REG_TEMP_BASE_ADDR 0x88 +#define ADT7462_REG_TEMP_MAX_ADDR 0x8F + +#define ADT7462_REG_FAN_BASE_ADDR 0x98 +#define ADT7462_REG_FAN_MAX_ADDR 0x9F +#define ADT7462_REG_FAN2_BASE_ADDR 0xA2 +#define ADT7462_REG_FAN2_MAX_ADDR 0xA9 +#define ADT7462_REG_FAN_ENABLE 0x07 +#define ADT7462_REG_FAN_MIN_BASE_ADDR 0x78 +#define ADT7462_REG_FAN_MIN_MAX_ADDR 0x7F + +#define ADT7462_REG_CFG2 0x02 +#define ADT7462_FSPD_MASK 0x20 + +#define ADT7462_REG_PWM_BASE_ADDR 0xAA +#define ADT7462_REG_PWM_MAX_ADDR 0xAD +#define ADT7462_REG_PWM_MIN_BASE_ADDR 0x28 +#define ADT7462_REG_PWM_MIN_MAX_ADDR 0x2B +#define ADT7462_REG_PWM_MAX 0x2C +#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR 0x5C +#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR 0x5F +#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR 0x60 +#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR 0x63 +#define ADT7462_PWM_HYST_MASK 0x0F +#define ADT7462_PWM_RANGE_MASK 0xF0 +#define ADT7462_PWM_RANGE_SHIFT 4 +#define ADT7462_REG_PWM_CFG_BASE_ADDR 0x21 +#define ADT7462_REG_PWM_CFG_MAX_ADDR 0x24 +#define ADT7462_PWM_CHANNEL_MASK 0xE0 +#define ADT7462_PWM_CHANNEL_SHIFT 5 + +#define ADT7462_REG_PIN_CFG_BASE_ADDR 0x10 +#define ADT7462_REG_PIN_CFG_MAX_ADDR 0x13 +#define ADT7462_PIN7_INPUT 0x01 /* cfg0 */ +#define ADT7462_DIODE3_INPUT 0x20 +#define ADT7462_DIODE1_INPUT 0x40 +#define ADT7462_VID_INPUT 0x80 +#define ADT7462_PIN22_INPUT 0x04 /* cfg1 */ +#define ADT7462_PIN21_INPUT 0x08 +#define ADT7462_PIN19_INPUT 0x10 +#define ADT7462_PIN15_INPUT 0x20 +#define ADT7462_PIN13_INPUT 0x40 +#define ADT7462_PIN8_INPUT 0x80 +#define ADT7462_PIN23_MASK 0x03 +#define ADT7462_PIN23_SHIFT 0 +#define ADT7462_PIN26_MASK 0x0C /* cfg2 */ +#define ADT7462_PIN26_SHIFT 2 +#define ADT7462_PIN25_MASK 0x30 +#define ADT7462_PIN25_SHIFT 4 +#define ADT7462_PIN24_MASK 0xC0 +#define ADT7462_PIN24_SHIFT 6 +#define ADT7462_PIN26_VOLT_INPUT 0x08 +#define ADT7462_PIN25_VOLT_INPUT 0x20 +#define ADT7462_PIN28_SHIFT 6 /* cfg3 */ +#define ADT7462_PIN28_VOLT 0x5 + +#define ADT7462_REG_ALARM1 0xB8 +#define ADT7462_LT_ALARM 0x02 +#define ADT7462_R1T_ALARM 0x04 +#define ADT7462_R2T_ALARM 0x08 +#define ADT7462_R3T_ALARM 0x10 +#define ADT7462_REG_ALARM2 0xBB +#define ADT7462_V0_ALARM 0x01 +#define ADT7462_V1_ALARM 0x02 +#define ADT7462_V2_ALARM 0x04 +#define ADT7462_V3_ALARM 0x08 +#define ADT7462_V4_ALARM 0x10 +#define ADT7462_V5_ALARM 0x20 +#define ADT7462_V6_ALARM 0x40 +#define ADT7462_V7_ALARM 0x80 +#define ADT7462_REG_ALARM3 0xBC +#define ADT7462_V8_ALARM 0x08 +#define ADT7462_V9_ALARM 0x10 +#define ADT7462_V10_ALARM 0x20 +#define ADT7462_V11_ALARM 0x40 +#define ADT7462_V12_ALARM 0x80 +#define ADT7462_REG_ALARM4 0xBD +#define ADT7462_F0_ALARM 0x01 +#define ADT7462_F1_ALARM 0x02 +#define ADT7462_F2_ALARM 0x04 +#define ADT7462_F3_ALARM 0x08 +#define ADT7462_F4_ALARM 0x10 +#define ADT7462_F5_ALARM 0x20 +#define ADT7462_F6_ALARM 0x40 +#define ADT7462_F7_ALARM 0x80 +#define ADT7462_ALARM1 0x0000 +#define ADT7462_ALARM2 0x0100 +#define ADT7462_ALARM3 0x0200 +#define ADT7462_ALARM4 0x0300 +#define ADT7462_ALARM_REG_SHIFT 8 +#define ADT7462_ALARM_FLAG_MASK 0x0F + +#define ADT7462_TEMP_COUNT 4 +#define ADT7462_TEMP_REG(x) (ADT7462_REG_TEMP_BASE_ADDR + (x * 2)) +#define ADT7462_TEMP_MIN_REG(x) (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x)) +#define ADT7462_TEMP_MAX_REG(x) (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x)) +#define TEMP_FRAC_OFFSET 6 + +#define ADT7462_FAN_COUNT 8 +#define ADT7462_REG_FAN_MIN(x) (ADT7462_REG_FAN_MIN_BASE_ADDR + (x)) + +#define ADT7462_PWM_COUNT 4 +#define ADT7462_REG_PWM(x) (ADT7462_REG_PWM_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_MIN(x) (ADT7462_REG_PWM_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TMIN(x) \ + (ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TRANGE(x) \ + (ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x)) + +#define ADT7462_PIN_CFG_REG_COUNT 4 +#define ADT7462_REG_PIN_CFG(x) (ADT7462_REG_PIN_CFG_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_CFG(x) (ADT7462_REG_PWM_CFG_BASE_ADDR + (x)) + +#define ADT7462_ALARM_REG_COUNT 4 + +/* + * The chip can measure 13 different voltage sources: + * + * 1. +12V1 (pin 7) + * 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23) + * 3. +12V3 (pin 22) + * 4. +5V (pin 21) + * 5. +1.25V/+0.9V (pin 19) + * 6. +2.5V/+1.8V (pin 15) + * 7. +3.3v (pin 13) + * 8. +12V2 (pin 8) + * 9. Vbatt/FSB_Vtt (pin 26) + * A. +3.3V/+1.2V1 (pin 25) + * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24) + * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V) + * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V) + * + * Each of these 13 has a factor to convert raw to voltage. Even better, + * the pins can be connected to other sensors (tach/gpio/hot/etc), which + * makes the bookkeeping tricky. + * + * Some, but not all, of these voltages have low/high limits. + */ +#define ADT7462_VOLT_COUNT 12 + +#define ADT7462_VENDOR 0x41 +#define ADT7462_DEVICE 0x62 +/* datasheet only mentions a revision 4 */ +#define ADT7462_REVISION 0x04 + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +/* datasheet says to divide this number by the fan reading to get fan rpm */ +#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) +#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM +#define FAN_PERIOD_INVALID 65535 +#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) + +#define MASK_AND_SHIFT(value, prefix) \ + (((value) & prefix##_MASK) >> prefix##_SHIFT) + +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + +struct adt7462_data { + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + char limits_valid; + unsigned long sensors_last_updated; /* In jiffies */ + unsigned long limits_last_updated; /* In jiffies */ + + u8 temp[ADT7462_TEMP_COUNT]; + /* bits 6-7 are quarter pieces of temp */ + u8 temp_frac[ADT7462_TEMP_COUNT]; + u8 temp_min[ADT7462_TEMP_COUNT]; + u8 temp_max[ADT7462_TEMP_COUNT]; + u16 fan[ADT7462_FAN_COUNT]; + u8 fan_enabled; + u8 fan_min[ADT7462_FAN_COUNT]; + u8 cfg2; + u8 pwm[ADT7462_PWM_COUNT]; + u8 pin_cfg[ADT7462_PIN_CFG_REG_COUNT]; + u8 voltages[ADT7462_VOLT_COUNT]; + u8 volt_max[ADT7462_VOLT_COUNT]; + u8 volt_min[ADT7462_VOLT_COUNT]; + u8 pwm_min[ADT7462_PWM_COUNT]; + u8 pwm_tmin[ADT7462_PWM_COUNT]; + u8 pwm_trange[ADT7462_PWM_COUNT]; + u8 pwm_max; /* only one per chip */ + u8 pwm_cfg[ADT7462_PWM_COUNT]; + u8 alarms[ADT7462_ALARM_REG_COUNT]; +}; + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7462_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7462_id[] = { + { "adt7462", adt7462 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7462_id); + +static struct i2c_driver adt7462_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adt7462", + }, + .probe = adt7462_probe, + .remove = adt7462_remove, + .id_table = adt7462_id, + .detect = adt7462_detect, + .address_data = &addr_data, +}; + +/* + * 16-bit registers on the ADT7462 are low-byte first. The data sheet says + * that the low byte must be read before the high byte. + */ +static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg) +{ + u16 foo; + foo = i2c_smbus_read_byte_data(client, reg); + foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); + return foo; +} + +/* For some reason these registers are not contiguous. */ +static int ADT7462_REG_FAN(int fan) +{ + if (fan < 4) + return ADT7462_REG_FAN_BASE_ADDR + (2 * fan); + return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4)); +} + +/* Voltage registers are scattered everywhere */ +static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x7C; + break; + case 1: + return 0x69; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x7F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x7E; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x4B; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x49; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x68; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x7D; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x6C; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x6B; + break; + case 10: + return 0x6A; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x50; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x4C; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x6D; + break; + case 1: + return 0x72; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x6F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x71; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x47; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x45; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x70; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x6E; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x75; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x74; + break; + case 10: + return 0x73; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x76; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x77; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0xA3; + break; + case 1: + return 0x90; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0xA9; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0xA7; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x8F; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x8B; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x96; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0xA5; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x93; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x92; + break; + case 10: + return 0x91; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x94; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x95; + break; + } + return -ENODEV; +} + +/* Provide labels for sysfs */ +static const char *voltage_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return "+12V1"; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + return "Vccp1"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5V"; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return "+12V3"; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return "+5V"; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+0.9V"; + return "+1.25V"; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+1.8V"; + return "+2.5V"; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return "+3.3V"; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return "+12V2"; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return "Vbatt"; + case 1: + return "FSB_Vtt"; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return "+3.3V"; + case 1: + return "+1.2V1"; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return "Vccp2"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5"; + } + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V ICH"; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V 3GPIO"; + break; + } + return "N/A"; +} + +/* Multipliers are actually in uV, not mV. */ +static int voltage_multiplier(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 62500; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + if (data->pin_cfg[0] & ADT7462_VID_INPUT) + return 12500; + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 62500; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 26000; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return 4690; + return 6500; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN15_INPUT) + return 9400; + return 13000; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 17200; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 62500; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return 15600; + case 1: + return 6250; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return 17200; + case 1: + return 6250; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 11: + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 7800; + } + return 0; +} + +static int temp_enabled(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + case 2: + return 1; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return 1; + break; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return 1; + break; + } + return 0; +} + +static const char *temp_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + return "local"; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return "remote1"; + break; + case 2: + return "remote2"; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return "remote3"; + break; + } + return "N/A"; +} + +/* Map Trange register values to mC */ +#define NUM_TRANGE_VALUES 16 +static const int trange_values[NUM_TRANGE_VALUES] = { + 2000, + 2500, + 3300, + 4000, + 5000, + 6700, + 8000, + 10000, + 13300, + 16000, + 20000, + 26700, + 32000, + 40000, + 53300, + 80000 +}; + +static int find_trange_value(int trange) +{ + int i; + + for (i = 0; i < NUM_TRANGE_VALUES; i++) + if (trange_values[i] == trange) + return i; + + return -ENODEV; +} + +static struct adt7462_data *adt7462_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto no_sensor_update; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + /* + * Reading the fractional register locks the integral + * register until both have been read. + */ + data->temp_frac[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i)); + data->temp[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i) + 1); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan[i] = adt7462_read_word_data(client, + ADT7462_REG_FAN(i)); + + data->fan_enabled = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_ENABLE); + + for (i = 0; i < ADT7462_PWM_COUNT; i++) + data->pwm[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM(i)); + + for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++) + data->pin_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PIN_CFG(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT(data, i); + if (!reg) + data->voltages[i] = 0; + else + data->voltages[i] = i2c_smbus_read_byte_data(client, + reg); + } + + data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1); + data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2); + data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3); + data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4); + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +no_sensor_update: + if (time_before(local_jiffies, data->limits_last_updated + + LIMIT_REFRESH_INTERVAL) + && data->limits_valid) + goto out; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + data->temp_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MIN_REG(i)); + data->temp_max[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MAX_REG(i)); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_MIN(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT_MAX(data, i); + data->volt_max[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + + reg = ADT7462_REG_VOLT_MIN(data, i); + data->volt_min[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + } + + for (i = 0; i < ADT7462_PWM_COUNT; i++) { + data->pwm_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_MIN(i)); + data->pwm_tmin[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TMIN(i)); + data->pwm_trange[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TRANGE(i)); + data->pwm_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_CFG(i)); + } + + data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX); + + data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + + data->limits_last_updated = local_jiffies; + data->limits_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_temp_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64)); +} + +static ssize_t set_temp_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->temp_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64)); +} + +static ssize_t set_temp_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->temp_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET; + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) + + 250 * frac); +} + +static ssize_t show_temp_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", temp_label(data, attr->index)); +} + +static ssize_t show_volt_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_max[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp = ROUND_DIV(temp, x); + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->volt_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MAX(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_volt_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_min[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp = ROUND_DIV(temp, x); + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->volt_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MIN(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->voltages[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_voltage_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", voltage_label(data, attr->index)); +} + +static ssize_t show_alarm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int reg = attr->index >> ADT7462_ALARM_REG_SHIFT; + int mask = attr->index & ADT7462_ALARM_FLAG_MASK; + + if (data->alarms[reg] & mask) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static int fan_enabled(struct adt7462_data *data, int fan) +{ + return data->fan_enabled & (1 << fan); +} + +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u16 temp; + + /* Only the MSB of the min fan period is stored... */ + temp = data->fan_min[attr->index]; + temp <<= 8; + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(temp)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp)); +} + +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp || + !fan_enabled(data, attr->index)) + return -EINVAL; + + temp = FAN_RPM_TO_PERIOD(temp); + temp >>= 8; + temp = SENSORS_LIMIT(temp, 1, 255); + + mutex_lock(&data->lock); + data->fan_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(data->fan[attr->index])) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", + FAN_PERIOD_TO_RPM(data->fan[attr->index])); +} + +static ssize_t show_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0)); +} + +static ssize_t set_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + u8 reg; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + mutex_lock(&data->lock); + reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + if (temp) + reg |= ADT7462_FSPD_MASK; + else + reg &= ~ADT7462_FSPD_MASK; + data->cfg2 = reg; + i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm[attr->index]); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_max); +} + +static ssize_t set_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_max = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_min[attr->index]); +} + +static ssize_t set_pwm_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * + (data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK)); +} + +static ssize_t set_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 15); + + /* package things up */ + temp &= ADT7462_PWM_HYST_MASK; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + /* tmax = tmin + trange */ + int trange = trange_values[data->pwm_trange[attr->index] >> + ADT7462_PWM_RANGE_SHIFT]; + int tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + + return sprintf(buf, "%d\n", tmin + trange); +} + +static ssize_t set_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + int temp; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int tmin, trange_value; + long trange; + + if (strict_strtol(buf, 10, &trange)) + return -EINVAL; + + /* trange = tmax - tmin */ + tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + trange_value = find_trange_value(trange - tmin); + + if (trange_value < 0) + return -EINVAL; + + temp = trange_value << ADT7462_PWM_RANGE_SHIFT; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64)); +} + +static ssize_t set_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_tmin[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_auto(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (cfg) { + case 4: /* off */ + return sprintf(buf, "0\n"); + case 7: /* manual */ + return sprintf(buf, "1\n"); + default: /* automatic */ + return sprintf(buf, "2\n"); + } +} + +static void set_pwm_channel(struct i2c_client *client, + struct adt7462_data *data, + int which, + int value) +{ + int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK; + temp |= value << ADT7462_PWM_CHANNEL_SHIFT; + + mutex_lock(&data->lock); + data->pwm_cfg[which] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp); + mutex_unlock(&data->lock); +} + +static ssize_t set_pwm_auto(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + switch (temp) { + case 0: /* off */ + set_pwm_channel(client, data, attr->index, 4); + return count; + case 1: /* manual */ + set_pwm_channel(client, data, attr->index, 7); + return count; + default: + return -EINVAL; + } +} + +static ssize_t show_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (channel) { + case 0: /* temp[1234] only */ + case 1: + case 2: + case 3: + return sprintf(buf, "%d\n", (1 << channel)); + case 5: /* temp1 & temp4 */ + return sprintf(buf, "9\n"); + case 6: + return sprintf(buf, "15\n"); + default: + return sprintf(buf, "0\n"); + } +} + +static int cvt_auto_temp(int input) +{ + if (input == 0xF) + return 6; + if (input == 0x9) + return 5; + if (input < 1 || !is_power_of_2(input)) + return -EINVAL; + return ilog2(input); +} + +static ssize_t set_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); + if (temp < 0) + return temp; + + set_pwm_channel(client, data, attr->index, temp); + + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 0); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 1); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 2); +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 1); +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 2); +static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 3); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_LT_ALARM); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R1T_ALARM); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R2T_ALARM); +static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R3T_ALARM); + +static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 0); +static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 1); +static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 2); +static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 3); +static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 4); +static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 5); +static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 6); +static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 7); +static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 8); +static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 9); +static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 10); +static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 11); +static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 12); + +static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 0); +static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 1); +static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 2); +static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 3); +static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 4); +static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 5); +static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 6); +static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 7); +static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 8); +static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 9); +static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 10); +static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 11); +static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 12); + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V0_ALARM); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V7_ALARM); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V2_ALARM); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V6_ALARM); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V5_ALARM); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V4_ALARM); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V3_ALARM); +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V1_ALARM); +static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V10_ALARM); +static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V9_ALARM); +static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V8_ALARM); +static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V11_ALARM); +static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V12_ALARM); + +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 0); +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 2); +static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 3); +static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 4); +static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 5); +static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 6); +static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 7); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7); + +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F0_ALARM); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F1_ALARM); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F2_ALARM); +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F3_ALARM); +static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F4_ALARM); +static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F5_ALARM); +static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F6_ALARM); +static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F7_ALARM); + +static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO, + show_force_pwm_max, set_force_pwm_max, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); +static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 3); + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 2); +static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 3); + +static struct attribute *adt7462_attr[] = +{ + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_temp4_label.dev_attr.attr, + + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_alarm.dev_attr.attr, + + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in9_max.dev_attr.attr, + &sensor_dev_attr_in10_max.dev_attr.attr, + &sensor_dev_attr_in11_max.dev_attr.attr, + &sensor_dev_attr_in12_max.dev_attr.attr, + &sensor_dev_attr_in13_max.dev_attr.attr, + + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + &sensor_dev_attr_in9_min.dev_attr.attr, + &sensor_dev_attr_in10_min.dev_attr.attr, + &sensor_dev_attr_in11_min.dev_attr.attr, + &sensor_dev_attr_in12_min.dev_attr.attr, + &sensor_dev_attr_in13_min.dev_attr.attr, + + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + &sensor_dev_attr_in9_label.dev_attr.attr, + &sensor_dev_attr_in10_label.dev_attr.attr, + &sensor_dev_attr_in11_label.dev_attr.attr, + &sensor_dev_attr_in12_label.dev_attr.attr, + &sensor_dev_attr_in13_label.dev_attr.attr, + + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + &sensor_dev_attr_in8_alarm.dev_attr.attr, + &sensor_dev_attr_in9_alarm.dev_attr.attr, + &sensor_dev_attr_in10_alarm.dev_attr.attr, + &sensor_dev_attr_in11_alarm.dev_attr.attr, + &sensor_dev_attr_in12_alarm.dev_attr.attr, + &sensor_dev_attr_in13_alarm.dev_attr.attr, + + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan7_min.dev_attr.attr, + &sensor_dev_attr_fan8_min.dev_attr.attr, + + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan7_alarm.dev_attr.attr, + &sensor_dev_attr_fan8_alarm.dev_attr.attr, + + &sensor_dev_attr_force_pwm_max.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm4.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm4_enable.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr, + NULL +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR); + if (vendor != ADT7462_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE); + if (device != ADT7462_DEVICE) + return -ENODEV; + + revision = i2c_smbus_read_byte_data(client, + ADT7462_REG_REVISION); + if (revision != ADT7462_REVISION) + return -ENODEV; + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "adt7462", I2C_NAME_SIZE); + + return 0; +} + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7462_data *data; + int err; + + data = kzalloc(sizeof(struct adt7462_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = adt7462_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_free: + kfree(data); +exit: + return err; +} + +static int adt7462_remove(struct i2c_client *client) +{ + struct adt7462_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init adt7462_init(void) +{ + return i2c_add_driver(&adt7462_driver); +} + +static void __exit adt7462_exit(void) +{ + i2c_del_driver(&adt7462_driver); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("ADT7462 driver"); +MODULE_LICENSE("GPL"); + +module_init(adt7462_init); +module_exit(adt7462_exit); -- cgit v1.2.3 From a412ae3fb90ab49072b82c8cfa1e3e60d2b27005 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:27:04 -0800 Subject: ics932s401: new clock generator chip driver The ics932s401 is a clock generator chip. This driver allows users to read the current clock outputs. Signed-off-by: Darrick J. Wong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ics932s401 | 31 +++ drivers/misc/Kconfig | 10 + drivers/misc/Makefile | 1 + drivers/misc/ics932s401.c | 515 ++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 557 insertions(+) create mode 100644 Documentation/ics932s401 create mode 100644 drivers/misc/ics932s401.c diff --git a/Documentation/ics932s401 b/Documentation/ics932s401 new file mode 100644 index 000000000000..07a739f406d8 --- /dev/null +++ b/Documentation/ics932s401 @@ -0,0 +1,31 @@ +Kernel driver ics932s401 +====================== + +Supported chips: + * IDT ICS932S401 + Prefix: 'ics932s401' + Addresses scanned: I2C 0x69 + Datasheet: Publically available at the IDT website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the IDT ICS932S401 chip family. + +This chip has 4 clock outputs--a base clock for the CPU (which is likely +multiplied to get the real CPU clock), a system clock, a PCI clock, a USB +clock, and a reference clock. The driver reports selected and actual +frequency. If spread spectrum mode is enabled, the driver also reports by what +percent the clock signal is being spread, which should be between 0 and -0.5%. +All frequencies are reported in KHz. + +The ICS932S401 monitors all inputs continuously. The driver will not read +the registers more often than once every other second. + +Special Features +---------------- + +The clocks could be reprogrammed to increase system speed. I will not help you +do this, as you risk damaging your system! diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4494ad27cbf1..dcac7ca76937 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -227,6 +227,16 @@ config HP_WMI To compile this driver as a module, choose M here: the module will be called hp-wmi. +config ICS932S401 + tristate "Integrated Circuits ICS932S401" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Integrated Circuits + ICS932S401 clock control chips. + + This driver can also be built as a module. If so, the module + will be called ics932s401. + config MSI_LAPTOP tristate "MSI Laptop Extras" depends on X86 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 909e2468cdc9..bb14633d1362 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o obj-$(CONFIG_HP_WMI) += hp-wmi.o +obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c new file mode 100644 index 000000000000..6e43ab4231ae --- /dev/null +++ b/drivers/misc/ics932s401.c @@ -0,0 +1,515 @@ +/* + * A driver for the Integrated Circuits ICS932S401 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ics932s401); + +/* ICS932S401 registers */ +#define ICS932S401_REG_CFG2 0x01 +#define ICS932S401_CFG1_SPREAD 0x01 +#define ICS932S401_REG_CFG7 0x06 +#define ICS932S401_FS_MASK 0x07 +#define ICS932S401_REG_VENDOR_REV 0x07 +#define ICS932S401_VENDOR 1 +#define ICS932S401_VENDOR_MASK 0x0F +#define ICS932S401_REV 4 +#define ICS932S401_REV_SHIFT 4 +#define ICS932S401_REG_DEVICE 0x09 +#define ICS932S401_DEVICE 11 +#define ICS932S401_REG_CTRL 0x0A +#define ICS932S401_MN_ENABLED 0x80 +#define ICS932S401_CPU_ALT 0x04 +#define ICS932S401_SRC_ALT 0x08 +#define ICS932S401_REG_CPU_M_CTRL 0x0B +#define ICS932S401_M_MASK 0x3F +#define ICS932S401_REG_CPU_N_CTRL 0x0C +#define ICS932S401_REG_CPU_SPREAD1 0x0D +#define ICS932S401_REG_CPU_SPREAD2 0x0E +#define ICS932S401_SPREAD_MASK 0x7FFF +#define ICS932S401_REG_SRC_M_CTRL 0x0F +#define ICS932S401_REG_SRC_N_CTRL 0x10 +#define ICS932S401_REG_SRC_SPREAD1 0x11 +#define ICS932S401_REG_SRC_SPREAD2 0x12 +#define ICS932S401_REG_CPU_DIVISOR 0x13 +#define ICS932S401_CPU_DIVISOR_SHIFT 4 +#define ICS932S401_REG_PCISRC_DIVISOR 0x14 +#define ICS932S401_SRC_DIVISOR_MASK 0x0F +#define ICS932S401_PCI_DIVISOR_SHIFT 4 + +/* Base clock is 14.318MHz */ +#define BASE_CLOCK 14318 + +#define NUM_REGS 21 +#define NUM_MIRRORED_REGS 15 + +static int regs_to_copy[NUM_MIRRORED_REGS] = { + ICS932S401_REG_CFG2, + ICS932S401_REG_CFG7, + ICS932S401_REG_VENDOR_REV, + ICS932S401_REG_DEVICE, + ICS932S401_REG_CTRL, + ICS932S401_REG_CPU_M_CTRL, + ICS932S401_REG_CPU_N_CTRL, + ICS932S401_REG_CPU_SPREAD1, + ICS932S401_REG_CPU_SPREAD2, + ICS932S401_REG_SRC_M_CTRL, + ICS932S401_REG_SRC_N_CTRL, + ICS932S401_REG_SRC_SPREAD1, + ICS932S401_REG_SRC_SPREAD2, + ICS932S401_REG_CPU_DIVISOR, + ICS932S401_REG_PCISRC_DIVISOR, +}; + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +struct ics932s401_data { + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + unsigned long sensors_last_updated; /* In jiffies */ + + u8 regs[NUM_REGS]; +}; + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ics932s401_remove(struct i2c_client *client); + +static const struct i2c_device_id ics932s401_id[] = { + { "ics932s401", ics932s401 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ics932s401_id); + +static struct i2c_driver ics932s401_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ics932s401", + }, + .probe = ics932s401_probe, + .remove = ics932s401_remove, + .id_table = ics932s401_id, + .detect = ics932s401_detect, + .address_data = &addr_data, +}; + +static struct ics932s401_data *ics932s401_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ics932s401_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i, temp; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto out; + + /* + * Each register must be read as a word and then right shifted 8 bits. + * Not really sure why this is; setting the "byte count programming" + * register to 1 does not fix this problem. + */ + for (i = 0; i < NUM_MIRRORED_REGS; i++) { + temp = i2c_smbus_read_word_data(client, regs_to_copy[i]); + data->regs[regs_to_copy[i]] = temp >> 8; + } + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_spread_enabled(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD) + return sprintf(buf, "1\n"); + + return sprintf(buf, "0\n"); +} + +/* bit to cpu khz map */ +static const int fs_speeds[] = { + 266666, + 133333, + 200000, + 166666, + 333333, + 100000, + 400000, + 0, +}; + +/* clock divisor map */ +static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16, + 24, 40, 120}; + +/* Calculate CPU frequency from the M/N registers. */ +static int calculate_cpu_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_CPU_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >> + ICS932S401_CPU_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_cpu_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_cpu_freq(data)); +} + +static ssize_t show_cpu_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_cpu_freq(data); + else { + /* Freq is neatly wrapped up for us */ + int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; + freq = fs_speeds[fid]; + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { + switch (freq) { + case 166666: + freq = 160000; + break; + case 333333: + freq = 320000; + break; + } + } + } + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate SRC frequency from the M/N registers. */ +static int calculate_src_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] & + ICS932S401_SRC_DIVISOR_MASK]; + + return freq; +} + +static ssize_t show_src_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_src_freq(data)); +} + +static ssize_t show_src_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_src_freq(data); + else + /* Freq is neatly wrapped up for us */ + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT && + data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT) + freq = 96000; + else + freq = 100000; + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate PCI frequency from the SRC M/N registers. */ +static int calculate_pci_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >> + ICS932S401_PCI_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_pci_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_pci_freq(data)); +} + +static ssize_t show_pci_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_pci_freq(data); + else + freq = 33333; + + return sprintf(buf, "%d\n", freq); +} + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf); + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf); + +static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL); +static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL); +static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL); +static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL); +static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL); +static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL); +static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL); +static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL); +static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL); +static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL); +static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL); + +static struct attribute *ics932s401_attr[] = +{ + &dev_attr_spread_enabled.attr, + &dev_attr_cpu_clock_selection.attr, + &dev_attr_cpu_clock.attr, + &dev_attr_src_clock_selection.attr, + &dev_attr_src_clock.attr, + &dev_attr_pci_clock_selection.attr, + &dev_attr_pci_clock.attr, + &dev_attr_usb_clock.attr, + &dev_attr_ref_clock.attr, + &dev_attr_cpu_spread.attr, + &dev_attr_src_spread.attr, + NULL +}; + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int x; + + if (devattr == &dev_attr_usb_clock) + x = 48000; + else if (devattr == &dev_attr_ref_clock) + x = BASE_CLOCK; + else + BUG(); + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int reg; + unsigned long val; + + if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)) + return sprintf(buf, "0%%\n"); + + if (devattr == &dev_attr_src_spread) + reg = ICS932S401_REG_SRC_SPREAD1; + else if (devattr == &dev_attr_cpu_spread) + reg = ICS932S401_REG_CPU_SPREAD1; + else + BUG(); + + val = data->regs[reg] | (data->regs[reg + 1] << 8); + val &= ICS932S401_SPREAD_MASK; + + /* Scale 0..2^14 to -0.5. */ + val = 500000 * val / 16384; + return sprintf(buf, "-0.%lu%%\n", val); +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_word_data(client, + ICS932S401_REG_VENDOR_REV); + vendor >>= 8; + revision = vendor >> ICS932S401_REV_SHIFT; + vendor &= ICS932S401_VENDOR_MASK; + if (vendor != ICS932S401_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_word_data(client, + ICS932S401_REG_DEVICE); + device >>= 8; + if (device != ICS932S401_DEVICE) + return -ENODEV; + + if (revision != ICS932S401_REV) + dev_info(&adapter->dev, "Unknown revision %d\n", + revision); + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "ics932s401", I2C_NAME_SIZE); + + return 0; +} + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ics932s401_data *data; + int err; + + data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = ics932s401_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int ics932s401_remove(struct i2c_client *client) +{ + struct ics932s401_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init ics932s401_init(void) +{ + return i2c_add_driver(&ics932s401_driver); +} + +static void __exit ics932s401_exit(void) +{ + i2c_del_driver(&ics932s401_driver); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("ICS932S401 driver"); +MODULE_LICENSE("GPL"); + +module_init(ics932s401_init); +module_exit(ics932s401_exit); + +/* IBM IntelliStation Z30 */ +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); + +/* IBM x3650/x3550 */ +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); -- cgit v1.2.3 From 077eaf5b40ecb2c345d82f02275c20e965dfa3e5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 12 Nov 2008 13:27:04 -0800 Subject: rtc: rtc-wm8350: add support for WM8350 RTC This adds support for the RTC provided by the Wolfson Microelectronics WM8350. This driver was originally written by Graeme Gregory and Liam Girdwood, though it has been modified since then to update it to current mainline coding standards and for API completeness. [akpm@linux-foundation.org: s/schedule_timeout_interruptible/schedule_timeout_uninterruptible/ to prevent bogus timeout when signal_pending()] Signed-off-by: Mark Brown Cc: Alessandro Zummo Cc: David Brownell Cc: Liam Girdwood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-wm8350.c | 514 +++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/wm8350/rtc.h | 2 + 4 files changed, 527 insertions(+) create mode 100644 drivers/rtc/rtc-wm8350.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8abbb2020af9..7951ad2fd995 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -468,6 +468,16 @@ config RTC_DRV_V3020 This driver can also be built as a module. If so, the module will be called rtc-v3020. +config RTC_DRV_WM8350 + tristate "Wolfson Microelectronics WM8350 RTC" + depends on MFD_WM8350 + help + If you say yes here you will get support for the RTC subsystem + of the Wolfson Microelectronics WM8350. + + This driver can also be built as a module. If so, the module + will be called "rtc-wm8350". + comment "on-CPU RTC drivers" config RTC_DRV_OMAP diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index e9e8474cc8fe..7a41201e7efd 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -66,4 +66,5 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o +obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c new file mode 100644 index 000000000000..5c5e3aa91385 --- /dev/null +++ b/drivers/rtc/rtc-wm8350.c @@ -0,0 +1,514 @@ +/* + * Real Time Clock driver for Wolfson Microelectronics WM8350 + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * linux@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define WM8350_SET_ALM_RETRIES 5 +#define WM8350_SET_TIME_RETRIES 5 +#define WM8350_GET_TIME_RETRIES 5 + +#define to_wm8350_from_rtc_dev(d) container_of(d, struct wm8350, rtc.pdev.dev) + +/* + * Read current time and date in RTC + */ +static int wm8350_rtc_readtime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time1[4], time2[4]; + int retries = WM8350_GET_TIME_RETRIES, ret; + + /* + * Read the time twice and compare. + * If time1 == time2, then time is valid else retry. + */ + do { + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time1); + if (ret < 0) + return ret; + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time2); + if (ret < 0) + return ret; + + if (memcmp(time1, time2, sizeof(time1)) == 0) { + tm->tm_sec = time1[0] & WM8350_RTC_SECS_MASK; + + tm->tm_min = (time1[0] & WM8350_RTC_MINS_MASK) + >> WM8350_RTC_MINS_SHIFT; + + tm->tm_hour = time1[1] & WM8350_RTC_HRS_MASK; + + tm->tm_wday = ((time1[1] >> WM8350_RTC_DAY_SHIFT) + & 0x7) - 1; + + tm->tm_mon = ((time1[2] & WM8350_RTC_MTH_MASK) + >> WM8350_RTC_MTH_SHIFT) - 1; + + tm->tm_mday = (time1[2] & WM8350_RTC_DATE_MASK); + + tm->tm_year = ((time1[3] & WM8350_RTC_YHUNDREDS_MASK) + >> WM8350_RTC_YHUNDREDS_SHIFT) * 100; + tm->tm_year += time1[3] & WM8350_RTC_YUNITS_MASK; + + tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, + tm->tm_year); + tm->tm_year -= 1900; + + dev_dbg(dev, "Read (%d left): %04x %04x %04x %04x\n", + retries, + time1[0], time1[1], time1[2], time1[3]); + + return 0; + } + } while (retries--); + + dev_err(dev, "timed out reading RTC time\n"); + return -EIO; +} + +/* + * Set current time and date in RTC + */ +static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time[4]; + u16 rtc_ctrl; + int ret, retries = WM8350_SET_TIME_RETRIES; + + time[0] = tm->tm_sec; + time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT; + time[1] = tm->tm_hour; + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT; + time[2] = tm->tm_mday; + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT; + time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT; + time[3] |= (tm->tm_year + 1900) % 100; + + dev_dbg(dev, "Setting: %04x %04x %04x %04x\n", + time[0], time[1], time[2], time[3]); + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_STS)); + + if (!retries) { + dev_err(dev, "timed out on set confirmation\n"); + return -EIO; + } + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + /* Clear RTC_SET to start the clock */ + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + return ret; +} + +/* + * Read alarm time and date in RTC + */ +static int wm8350_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[4]; + int ret; + + ret = wm8350_block_read(wm8350, WM8350_ALARM_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + tm->tm_sec = time[0] & WM8350_RTC_ALMSECS_MASK; + if (tm->tm_sec == WM8350_RTC_ALMSECS_MASK) + tm->tm_sec = -1; + + tm->tm_min = time[0] & WM8350_RTC_ALMMINS_MASK; + if (tm->tm_min == WM8350_RTC_ALMMINS_MASK) + tm->tm_min = -1; + else + tm->tm_min >>= WM8350_RTC_ALMMINS_SHIFT; + + tm->tm_hour = time[1] & WM8350_RTC_ALMHRS_MASK; + if (tm->tm_hour == WM8350_RTC_ALMHRS_MASK) + tm->tm_hour = -1; + + tm->tm_wday = ((time[1] >> WM8350_RTC_ALMDAY_SHIFT) & 0x7) - 1; + if (tm->tm_wday > 7) + tm->tm_wday = -1; + + tm->tm_mon = time[2] & WM8350_RTC_ALMMTH_MASK; + if (tm->tm_mon == WM8350_RTC_ALMMTH_MASK) + tm->tm_mon = -1; + else + tm->tm_mon = (tm->tm_mon >> WM8350_RTC_ALMMTH_SHIFT) - 1; + + tm->tm_mday = (time[2] & WM8350_RTC_ALMDATE_MASK); + if (tm->tm_mday == WM8350_RTC_ALMDATE_MASK) + tm->tm_mday = -1; + + tm->tm_year = -1; + + alrm->enabled = !(time[3] & WM8350_RTC_ALMSTS); + + return 0; +} + +static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350) +{ + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + int ret; + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS)); + + if (!(rtc_ctrl & WM8350_RTC_ALMSTS)) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_start_alarm(struct wm8350 *wm8350) +{ + int ret; + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS); + + if (rtc_ctrl & WM8350_RTC_ALMSTS) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[3]; + int ret; + + memset(time, 0, sizeof(time)); + + if (tm->tm_sec != -1) + time[0] |= tm->tm_sec; + else + time[0] |= WM8350_RTC_ALMSECS_MASK; + + if (tm->tm_min != -1) + time[0] |= tm->tm_min << WM8350_RTC_ALMMINS_SHIFT; + else + time[0] |= WM8350_RTC_ALMMINS_MASK; + + if (tm->tm_hour != -1) + time[1] |= tm->tm_hour; + else + time[1] |= WM8350_RTC_ALMHRS_MASK; + + if (tm->tm_wday != -1) + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_ALMDAY_SHIFT; + else + time[1] |= WM8350_RTC_ALMDAY_MASK; + + if (tm->tm_mday != -1) + time[2] |= tm->tm_mday; + else + time[2] |= WM8350_RTC_ALMDATE_MASK; + + if (tm->tm_mon != -1) + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_ALMMTH_SHIFT; + else + time[2] |= WM8350_RTC_ALMMTH_MASK; + + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret < 0) + return ret; + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_ALARM_SECONDS_MINUTES, + 3, time); + if (ret < 0) + return ret; + + if (alrm->enabled) + ret = wm8350_rtc_start_alarm(wm8350); + + return ret; +} + +/* + * Handle commands from user-space + */ +static int wm8350_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + + switch (cmd) { + case RTC_AIE_OFF: + return wm8350_rtc_stop_alarm(wm8350); + case RTC_AIE_ON: + return wm8350_rtc_start_alarm(wm8350); + + case RTC_UIE_OFF: + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + case RTC_UIE_ON: + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + + default: + return -ENOIOCTLCMD; + } + + return 0; +} + +static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + int ret; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF); + + /* Make it one shot */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret != 0) { + dev_err(&(wm8350->rtc.pdev->dev), + "Failed to disable alarm: %d\n", ret); + } +} + +static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF); +} + +static const struct rtc_class_ops wm8350_rtc_ops = { + .ioctl = wm8350_rtc_ioctl, + .read_time = wm8350_rtc_readtime, + .set_time = wm8350_rtc_settime, + .read_alarm = wm8350_rtc_readalarm, + .set_alarm = wm8350_rtc_setalarm, +}; + +#ifdef CONFIG_PM +static int wm8350_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret = 0; + u16 reg; + + reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + + if (device_may_wakeup(&wm8350->rtc.pdev->dev) && + reg & WM8350_RTC_ALMSTS) { + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", + ret); + } + + return ret; +} + +static int wm8350_rtc_resume(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret; + + if (wm8350->rtc.alarm_enabled) { + ret = wm8350_rtc_start_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, + "Failed to restart RTC alarm: %d\n", ret); + } + + return 0; +} + +#else +#define wm8350_rtc_suspend NULL +#define wm8350_rtc_resume NULL +#endif + +static int wm8350_rtc_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + int ret = 0; + u16 timectl, power5; + + timectl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + if (timectl & WM8350_RTC_BCD) { + dev_err(&pdev->dev, "RTC BCD mode not supported\n"); + return -EINVAL; + } + if (timectl & WM8350_RTC_12HR) { + dev_err(&pdev->dev, "RTC 12 hour mode not supported\n"); + return -EINVAL; + } + + /* enable the RTC if it's not already enabled */ + power5 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + if (!(power5 & WM8350_RTC_TICK_ENA)) { + dev_info(wm8350->dev, "Starting RTC\n"); + + wm8350_reg_unlock(wm8350); + + ret = wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, + WM8350_RTC_TICK_ENA); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable RTC: %d\n", ret); + return ret; + } + + wm8350_reg_lock(wm8350); + } + + if (timectl & WM8350_RTC_STS) { + int retries; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + if (ret < 0) { + dev_err(&pdev->dev, "failed to start: %d\n", ret); + return ret; + } + + retries = WM8350_SET_TIME_RETRIES; + do { + timectl = wm8350_reg_read(wm8350, + WM8350_RTC_TIME_CONTROL); + } while (timectl & WM8350_RTC_STS && retries--); + + if (retries == 0) { + dev_err(&pdev->dev, "failed to start: timeout\n"); + return -ENODEV; + } + } + + device_init_wakeup(&pdev->dev, 1); + + wm_rtc->rtc = rtc_device_register("wm8350", &pdev->dev, + &wm8350_rtc_ops, THIS_MODULE); + if (IS_ERR(wm_rtc->rtc)) { + ret = PTR_ERR(wm_rtc->rtc); + dev_err(&pdev->dev, "failed to register RTC: %d\n", ret); + return ret; + } + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC, + wm8350_rtc_update_handler, NULL); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM, + wm8350_rtc_alarm_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM); + + return 0; +} + +static int __devexit wm8350_rtc_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM); + + rtc_device_unregister(wm_rtc->rtc); + + return 0; +} + +static struct platform_driver wm8350_rtc_driver = { + .probe = wm8350_rtc_probe, + .remove = __devexit_p(wm8350_rtc_remove), + .suspend = wm8350_rtc_suspend, + .resume = wm8350_rtc_resume, + .driver = { + .name = "wm8350-rtc", + }, +}; + +static int __init wm8350_rtc_init(void) +{ + return platform_driver_register(&wm8350_rtc_driver); +} +module_init(wm8350_rtc_init); + +static void __exit wm8350_rtc_exit(void) +{ + platform_driver_unregister(&wm8350_rtc_driver); +} +module_exit(wm8350_rtc_exit); + +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("RTC driver for the WM8350"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-rtc"); diff --git a/include/linux/mfd/wm8350/rtc.h b/include/linux/mfd/wm8350/rtc.h index dfda69e9f440..24add2bef6c9 100644 --- a/include/linux/mfd/wm8350/rtc.h +++ b/include/linux/mfd/wm8350/rtc.h @@ -261,6 +261,8 @@ struct wm8350_rtc { struct platform_device *pdev; + struct rtc_device *rtc; + int alarm_enabled; /* used over suspend/resume */ }; #endif -- cgit v1.2.3 From a7fa9851b6dd18824320c4129f26947b3cdb63d8 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Wed, 12 Nov 2008 13:27:06 -0800 Subject: rtc: basic implementation of Epson RX-8581 I2C Real Time Clock Provide the basic "get" and "set" functionality for the Epson RX-8581 I2C RTC. It currently does not support the RTC's Alarm or Fixed-cycle timer. [akpm@linux-foundation.org: need log2.h for ilog2(), remove unneeded initialisation] Signed-off-by: Martyn Welch Signed-off-by: Alessandro Zummo Cc: David Brownell Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 8 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rx8581.c | 281 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 290 insertions(+) create mode 100644 drivers/rtc/rtc-rx8581.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 7951ad2fd995..990020c1dae9 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -277,6 +277,14 @@ config RTC_DRV_FM3130 This driver can also be built as a module. If so the module will be called rtc-fm3130. +config RTC_DRV_RX8581 + tristate "Epson RX-8581" + help + If you say yes here you will get support for the Epson RX-8581. + + This driver can also be built as a module. If so the module + will be called rtc-rx8581. + endif # I2C comment "SPI RTC drivers" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 7a41201e7efd..16368600643c 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o +obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c new file mode 100644 index 000000000000..c9522f3bc21c --- /dev/null +++ b/drivers/rtc/rtc-rx8581.c @@ -0,0 +1,281 @@ +/* + * An I2C driver for the Epson RX8581 RTC + * + * Author: Martyn Welch + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC) + * Copyright 2005-06 Tower Technologies + */ + +#include +#include +#include +#include +#include + +#define DRV_VERSION "0.1" + +#define RX8581_REG_SC 0x00 /* Second in BCD */ +#define RX8581_REG_MN 0x01 /* Minute in BCD */ +#define RX8581_REG_HR 0x02 /* Hour in BCD */ +#define RX8581_REG_DW 0x03 /* Day of Week */ +#define RX8581_REG_DM 0x04 /* Day of Month in BCD */ +#define RX8581_REG_MO 0x05 /* Month in BCD */ +#define RX8581_REG_YR 0x06 /* Year in BCD */ +#define RX8581_REG_RAM 0x07 /* RAM */ +#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/ +#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */ +#define RX8581_REG_ADM 0x0A +#define RX8581_REG_ADW 0x0A +#define RX8581_REG_TMR0 0x0B +#define RX8581_REG_TMR1 0x0C +#define RX8581_REG_EXT 0x0D /* Extension Register */ +#define RX8581_REG_FLAG 0x0E /* Flag Register */ +#define RX8581_REG_CTRL 0x0F /* Control Register */ + + +/* Flag Register bit definitions */ +#define RX8581_FLAG_UF 0x20 /* Update */ +#define RX8581_FLAG_TF 0x10 /* Timer */ +#define RX8581_FLAG_AF 0x08 /* Alarm */ +#define RX8581_FLAG_VLF 0x02 /* Voltage Low */ + +/* Control Register bit definitions */ +#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */ +#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */ +#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */ +#define RX8581_CTRL_STOP 0x02 /* STOP bit */ +#define RX8581_CTRL_RESET 0x01 /* RESET bit */ + +static struct i2c_driver rx8581_driver; + +/* + * In the routines that deal directly with the rx8581 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. + */ +static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + unsigned char date[7]; + int data, err; + + /* First we ensure that the "update flag" is not set, we read the + * time and date then re-read the "update flag". If the update flag + * has been set, we know that the time has changed during the read so + * we repeat the whole process again. + */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + + do { + /* If update flag set, clear it */ + if (data & RX8581_FLAG_UF) { + err = i2c_smbus_write_byte_data(client, + RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF)); + if (err != 0) { + dev_err(&client->dev, "Unable to write device " + "flags\n"); + return -EIO; + } + } + + /* Now read time and date */ + err = i2c_smbus_read_i2c_block_data(client, RX8581_REG_SC, + 7, date); + if (err < 0) { + dev_err(&client->dev, "Unable to read date\n"); + return -EIO; + } + + /* Check flag register */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + } while (data & RX8581_FLAG_UF); + + if (data & RX8581_FLAG_VLF) + dev_info(&client->dev, + "low voltage detected, date/time is not reliable.\n"); + + dev_dbg(&client->dev, + "%s: raw data is sec=%02x, min=%02x, hr=%02x, " + "wday=%02x, mday=%02x, mon=%02x, year=%02x\n", + __func__, + date[0], date[1], date[2], date[3], date[4], date[5], date[6]); + + tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */ + tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F); + tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F); + tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ + tm->tm_year = bcd2bin(date[RX8581_REG_YR]); + if (tm->tm_year < 70) + tm->tm_year += 100; /* assume we are in 1970...2069 */ + + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + err = rtc_valid_tm(tm); + if (err < 0) + dev_err(&client->dev, "retrieved date/time is not valid.\n"); + + return err; +} + +static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + int data, err; + unsigned char buf[7]; + + dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + /* hours, minutes and seconds */ + buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec); + buf[RX8581_REG_MN] = bin2bcd(tm->tm_min); + buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour); + + buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday); + + /* month, 1 - 12 */ + buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1); + + /* year and century */ + buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100); + buf[RX8581_REG_DW] = (0x1 << tm->tm_wday); + + /* Stop the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | RX8581_CTRL_STOP)); + if (err < 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + /* write register's data */ + err = i2c_smbus_write_i2c_block_data(client, RX8581_REG_SC, 7, buf); + if (err < 0) { + dev_err(&client->dev, "Unable to write to date registers\n"); + return -EIO; + } + + /* Restart the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | ~(RX8581_CTRL_STOP))); + if (err != 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + return 0; +} + +static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_get_datetime(to_i2c_client(dev), tm); +} + +static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_set_datetime(to_i2c_client(dev), tm); +} + +static const struct rtc_class_ops rx8581_rtc_ops = { + .read_time = rx8581_rtc_read_time, + .set_time = rx8581_rtc_set_time, +}; + +static int __devinit rx8581_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct rtc_device *rtc; + + dev_dbg(&client->dev, "%s\n", __func__); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + + rtc = rtc_device_register(rx8581_driver.driver.name, + &client->dev, &rx8581_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + i2c_set_clientdata(client, rtc); + + return 0; +} + +static int __devexit rx8581_remove(struct i2c_client *client) +{ + struct rtc_device *rtc = i2c_get_clientdata(client); + + rtc_device_unregister(rtc); + + return 0; +} + +static const struct i2c_device_id rx8581_id[] = { + { "rx8581", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rx8581_id); + +static struct i2c_driver rx8581_driver = { + .driver = { + .name = "rtc-rx8581", + .owner = THIS_MODULE, + }, + .probe = rx8581_probe, + .remove = __devexit_p(rx8581_remove), + .id_table = rx8581_id, +}; + +static int __init rx8581_init(void) +{ + return i2c_add_driver(&rx8581_driver); +} + +static void __exit rx8581_exit(void) +{ + i2c_del_driver(&rx8581_driver); +} + +MODULE_AUTHOR("Martyn Welch "); +MODULE_DESCRIPTION("Epson RX-8581 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(rx8581_init); +module_exit(rx8581_exit); -- cgit v1.2.3 From 06de18085122b873012cb23f043e2bdcf5f50923 Mon Sep 17 00:00:00 2001 From: Mark Jackson Date: Wed, 12 Nov 2008 13:27:07 -0800 Subject: rtc: add Dallas DS1390/93/94 RTC chips Add support for the Dallas DS1390/93/94 SPI RTC chip. Signed-off-by: Mark Jackson Acked-by: Alessandro Zummo Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 11 +++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-ds1390.c | 220 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 232 insertions(+) create mode 100644 drivers/rtc/rtc-ds1390.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 990020c1dae9..123092d8a984 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -310,6 +310,17 @@ config RTC_DRV_DS1305 This driver can also be built as a module. If so, the module will be called rtc-ds1305. +config RTC_DRV_DS1390 + tristate "Dallas/Maxim DS1390/93/94" + help + If you say yes here you get support for the DS1390/93/94 chips. + + This driver only supports the RTC feature, and not other chip + features such as alarms and trickle charging. + + This driver can also be built as a module. If so, the module + will be called rtc-ds1390. + config RTC_DRV_MAX6902 tristate "Maxim MAX6902" help diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 16368600643c..6e79c912bf9e 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o obj-$(CONFIG_RTC_DRV_DS1305) += rtc-ds1305.o obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o obj-$(CONFIG_RTC_DRV_DS1374) += rtc-ds1374.o +obj-$(CONFIG_RTC_DRV_DS1390) += rtc-ds1390.o obj-$(CONFIG_RTC_DRV_DS1511) += rtc-ds1511.o obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c new file mode 100644 index 000000000000..599e976bf014 --- /dev/null +++ b/drivers/rtc/rtc-ds1390.c @@ -0,0 +1,220 @@ +/* + * rtc-ds1390.c -- driver for DS1390/93/94 + * + * Copyright (C) 2008 Mercury IMC Ltd + * Written by Mark Jackson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * NOTE : Currently this driver only supports the bare minimum for read + * and write the RTC. The extra features provided by the chip family + * (alarms, trickle charger, different control registers) are unavailable. + */ + +#include +#include +#include +#include + +#define DS1390_REG_100THS 0x00 +#define DS1390_REG_SECONDS 0x01 +#define DS1390_REG_MINUTES 0x02 +#define DS1390_REG_HOURS 0x03 +#define DS1390_REG_DAY 0x04 +#define DS1390_REG_DATE 0x05 +#define DS1390_REG_MONTH_CENT 0x06 +#define DS1390_REG_YEAR 0x07 + +#define DS1390_REG_ALARM_100THS 0x08 +#define DS1390_REG_ALARM_SECONDS 0x09 +#define DS1390_REG_ALARM_MINUTES 0x0A +#define DS1390_REG_ALARM_HOURS 0x0B +#define DS1390_REG_ALARM_DAY_DATE 0x0C + +#define DS1390_REG_CONTROL 0x0D +#define DS1390_REG_STATUS 0x0E +#define DS1390_REG_TRICKLE 0x0F + +struct ds1390 { + struct rtc_device *rtc; + u8 txrx_buf[9]; /* cmd + 8 registers */ +}; + +static void ds1390_set_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* Set MSB to indicate write */ + chip->txrx_buf[0] = address | 0x80; + chip->txrx_buf[1] = data; + + /* do the i/o */ + spi_write_then_read(spi, chip->txrx_buf, 2, NULL, 0); +} + +static int ds1390_get_reg(struct device *dev, unsigned char address, + unsigned char *data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + if (!data) + return -EINVAL; + + /* Clear MSB to indicate read */ + chip->txrx_buf[0] = address & 0x7f; + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1); + if (status != 0) + return status; + + *data = chip->txrx_buf[1]; + + return 0; +} + +static int ds1390_get_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS; + + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8); + if (status != 0) + return status; + + /* The chip sends data in this order: + * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */ + dt->tm_sec = bcd2bin(chip->txrx_buf[0]); + dt->tm_min = bcd2bin(chip->txrx_buf[1]); + dt->tm_hour = bcd2bin(chip->txrx_buf[2]); + dt->tm_wday = bcd2bin(chip->txrx_buf[3]); + dt->tm_mday = bcd2bin(chip->txrx_buf[4]); + /* mask off century bit */ + dt->tm_mon = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1; + /* adjust for century bit */ + dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0); + + return rtc_valid_tm(dt); +} + +static int ds1390_set_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80; + chip->txrx_buf[1] = bin2bcd(dt->tm_sec); + chip->txrx_buf[2] = bin2bcd(dt->tm_min); + chip->txrx_buf[3] = bin2bcd(dt->tm_hour); + chip->txrx_buf[4] = bin2bcd(dt->tm_wday); + chip->txrx_buf[5] = bin2bcd(dt->tm_mday); + chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) | + ((dt->tm_year > 99) ? 0x80 : 0x00); + chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100); + + /* do the i/o */ + return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0); +} + +static int ds1390_read_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_get_datetime(dev, tm); +} + +static int ds1390_set_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_set_datetime(dev, tm); +} + +static const struct rtc_class_ops ds1390_rtc_ops = { + .read_time = ds1390_read_time, + .set_time = ds1390_set_time, +}; + +static int __devinit ds1390_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char tmp; + struct ds1390 *chip; + int res; + + printk(KERN_DEBUG "DS1390 SPI RTC driver\n"); + + rtc = rtc_device_register("ds1390", + &spi->dev, &ds1390_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + printk(KERN_ALERT "RTC : unable to register device\n"); + return PTR_ERR(rtc); + } + + spi->mode = SPI_MODE_3; + spi->bits_per_word = 8; + spi_setup(spi); + + chip = kzalloc(sizeof *chip, GFP_KERNEL); + if (!chip) { + printk(KERN_ALERT "RTC : unable to allocate device memory\n"); + rtc_device_unregister(rtc); + return -ENOMEM; + } + chip->rtc = rtc; + dev_set_drvdata(&spi->dev, chip); + + res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp); + if (res) { + printk(KERN_ALERT "RTC : unable to read device\n"); + rtc_device_unregister(rtc); + return res; + } + + return 0; +} + +static int __devexit ds1390_remove(struct spi_device *spi) +{ + struct ds1390 *chip = platform_get_drvdata(spi); + struct rtc_device *rtc = chip->rtc; + + if (rtc) + rtc_device_unregister(rtc); + + kfree(chip); + + return 0; +} + +static struct spi_driver ds1390_driver = { + .driver = { + .name = "rtc-ds1390", + .owner = THIS_MODULE, + }, + .probe = ds1390_probe, + .remove = __devexit_p(ds1390_remove), +}; + +static __init int ds1390_init(void) +{ + return spi_register_driver(&ds1390_driver); +} +module_init(ds1390_init); + +static __exit void ds1390_exit(void) +{ + spi_unregister_driver(&ds1390_driver); +} +module_exit(ds1390_exit); + +MODULE_DESCRIPTION("DS1390/93/94 SPI RTC driver"); +MODULE_AUTHOR("Mark Jackson "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 34e453d45584ea9dc1f62833ace17c79a379deb4 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:08 -0800 Subject: w1: export w1_read_8 function Export the w1_read_8 function for use of drivers. The OMAP HDQ driver(drivers/w1/masters/omap_hdq.c) uses this function. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Madhusudhan Chikkature Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/w1.h | 1 + drivers/w1/w1_io.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h index cdaa6fffbfc7..97304bd83ec9 100644 --- a/drivers/w1/w1.h +++ b/drivers/w1/w1.h @@ -206,6 +206,7 @@ void w1_slave_detach(struct w1_slave *sl); u8 w1_triplet(struct w1_master *dev, int bdir); void w1_write_8(struct w1_master *, u8); +u8 w1_read_8(struct w1_master *); int w1_reset_bus(struct w1_master *); u8 w1_calc_crc8(u8 *, int); void w1_write_block(struct w1_master *, const u8 *, int); diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index f4f82f1f486e..0d15b0eaf79a 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -217,7 +217,7 @@ u8 w1_triplet(struct w1_master *dev, int bdir) * @param dev the master device * @return the byte read */ -static u8 w1_read_8(struct w1_master * dev) +u8 w1_read_8(struct w1_master *dev) { int i; u8 res = 0; @@ -230,6 +230,7 @@ static u8 w1_read_8(struct w1_master * dev) return res; } +EXPORT_SYMBOL_GPL(w1_read_8); /** * Writes a series of bytes. -- cgit v1.2.3 From 9f2bc79f7dd04adda1fc3be510c9b3d436f846c7 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:09 -0800 Subject: hdq driver for OMAP2430/3430 The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware protocol of the master functions of the Benchmark HDQ and the Dallas Semiconductor 1-Wire protocols. These protocols use a single wire for communication between the master (HDQ/1-Wire controller) and the slave (HDQ/1-Wire external compliant device). This patch provides the HDQ driver to suppport TI OMAP2430/3430 platforms. Signed-off-by: Madhusudhan Chikkature Acked-by: Felipe Balbi Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/masters/Kconfig | 7 + drivers/w1/masters/Makefile | 1 + drivers/w1/masters/omap_hdq.c | 725 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 733 insertions(+) create mode 100644 drivers/w1/masters/omap_hdq.c diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index c4493091c655..a14d5b6e4c7c 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -52,5 +52,12 @@ config W1_MASTER_GPIO This support is also available as a module. If so, the module will be called w1-gpio.ko. +config HDQ_MASTER_OMAP + tristate "OMAP HDQ driver" + depends on ARCH_OMAP2430 || ARCH_OMAP34XX + help + Say Y here if you want support for the 1-wire or HDQ Interface + on an OMAP processor. + endmenu diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile index 1420b5bbdda8..bc4714a75f3a 100644 --- a/drivers/w1/masters/Makefile +++ b/drivers/w1/masters/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o obj-$(CONFIG_W1_MASTER_DS1WM) += ds1wm.o obj-$(CONFIG_W1_MASTER_GPIO) += w1-gpio.o +obj-$(CONFIG_HDQ_MASTER_OMAP) += omap_hdq.o diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c new file mode 100644 index 000000000000..1295625c4825 --- /dev/null +++ b/drivers/w1/masters/omap_hdq.c @@ -0,0 +1,725 @@ +/* + * drivers/w1/masters/omap_hdq.c + * + * Copyright (C) 2007 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "../w1.h" +#include "../w1_int.h" + +#define MOD_NAME "OMAP_HDQ:" + +#define OMAP_HDQ_REVISION 0x00 +#define OMAP_HDQ_TX_DATA 0x04 +#define OMAP_HDQ_RX_DATA 0x08 +#define OMAP_HDQ_CTRL_STATUS 0x0c +#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK (1<<6) +#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE (1<<5) +#define OMAP_HDQ_CTRL_STATUS_GO (1<<4) +#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION (1<<2) +#define OMAP_HDQ_CTRL_STATUS_DIR (1<<1) +#define OMAP_HDQ_CTRL_STATUS_MODE (1<<0) +#define OMAP_HDQ_INT_STATUS 0x10 +#define OMAP_HDQ_INT_STATUS_TXCOMPLETE (1<<2) +#define OMAP_HDQ_INT_STATUS_RXCOMPLETE (1<<1) +#define OMAP_HDQ_INT_STATUS_TIMEOUT (1<<0) +#define OMAP_HDQ_SYSCONFIG 0x14 +#define OMAP_HDQ_SYSCONFIG_SOFTRESET (1<<1) +#define OMAP_HDQ_SYSCONFIG_AUTOIDLE (1<<0) +#define OMAP_HDQ_SYSSTATUS 0x18 +#define OMAP_HDQ_SYSSTATUS_RESETDONE (1<<0) + +#define OMAP_HDQ_FLAG_CLEAR 0 +#define OMAP_HDQ_FLAG_SET 1 +#define OMAP_HDQ_TIMEOUT (HZ/5) + +#define OMAP_HDQ_MAX_USER 4 + +static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue); +static int w1_id; + +struct hdq_data { + struct device *dev; + void __iomem *hdq_base; + /* lock status update */ + struct mutex hdq_mutex; + int hdq_usecount; + struct clk *hdq_ick; + struct clk *hdq_fck; + u8 hdq_irqstatus; + /* device lock */ + spinlock_t hdq_spinlock; + /* + * Used to control the call to omap_hdq_get and omap_hdq_put. + * HDQ Protocol: Write the CMD|REG_address first, followed by + * the data wrire or read. + */ + int init_trans; +}; + +static int __init omap_hdq_probe(struct platform_device *pdev); +static int omap_hdq_remove(struct platform_device *pdev); + +static struct platform_driver omap_hdq_driver = { + .probe = omap_hdq_probe, + .remove = omap_hdq_remove, + .driver = { + .name = "omap_hdq", + }, +}; + +static u8 omap_w1_read_byte(void *_hdq); +static void omap_w1_write_byte(void *_hdq, u8 byte); +static u8 omap_w1_reset_bus(void *_hdq); +static void omap_w1_search_bus(void *_hdq, u8 search_type, + w1_slave_found_callback slave_found); + + +static struct w1_bus_master omap_w1_master = { + .read_byte = omap_w1_read_byte, + .write_byte = omap_w1_write_byte, + .reset_bus = omap_w1_reset_bus, + .search = omap_w1_search_bus, +}; + +/* HDQ register I/O routines */ +static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset) +{ + return __raw_readb(hdq_data->hdq_base + offset); +} + +static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val) +{ + __raw_writeb(val, hdq_data->hdq_base + offset); +} + +static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset, + u8 val, u8 mask) +{ + u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask) + | (val & mask); + __raw_writeb(new_val, hdq_data->hdq_base + offset); + + return new_val; +} + +/* + * Wait for one or more bits in flag change. + * HDQ_FLAG_SET: wait until any bit in the flag is set. + * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared. + * return 0 on success and -ETIMEDOUT in the case of timeout. + */ +static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset, + u8 flag, u8 flag_set, u8 *status) +{ + int ret = 0; + unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; + + if (flag_set == OMAP_HDQ_FLAG_CLEAR) { + /* wait for the flag clear */ + while (((*status = hdq_reg_in(hdq_data, offset)) & flag) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + if (*status & flag) + ret = -ETIMEDOUT; + } else if (flag_set == OMAP_HDQ_FLAG_SET) { + /* wait for the flag set */ + while (!((*status = hdq_reg_in(hdq_data, offset)) & flag) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + if (!(*status & flag)) + ret = -ETIMEDOUT; + } else + return -EINVAL; + + return ret; +} + +/* write out a byte and fill *status with HDQ_INT_STATUS */ +static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status) +{ + int ret; + u8 tmp_status; + unsigned long irqflags; + + *status = 0; + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + /* clear interrupt flags via a dummy read */ + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + /* ISR loads it with new INT_STATUS */ + hdq_data->hdq_irqstatus = 0; + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + + hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val); + + /* set the GO bit */ + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); + /* wait for the TXCOMPLETE bit */ + ret = wait_event_timeout(hdq_wait_queue, + hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); + if (ret == 0) { + dev_dbg(hdq_data->dev, "TX wait elapsed\n"); + goto out; + } + + *status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) { + dev_dbg(hdq_data->dev, "timeout waiting for" + "TXCOMPLETE/RXCOMPLETE, %x", *status); + ret = -ETIMEDOUT; + goto out; + } + + /* wait for the GO bit return to zero */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_FLAG_CLEAR, &tmp_status); + if (ret) { + dev_dbg(hdq_data->dev, "timeout waiting GO bit" + "return to zero, %x", tmp_status); + } + +out: + return ret; +} + +/* HDQ Interrupt service routine */ +static irqreturn_t hdq_isr(int irq, void *_hdq) +{ + struct hdq_data *hdq_data = _hdq; + unsigned long irqflags; + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus); + + if (hdq_data->hdq_irqstatus & + (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE + | OMAP_HDQ_INT_STATUS_TIMEOUT)) { + /* wake up sleeping process */ + wake_up(&hdq_wait_queue); + } + + return IRQ_HANDLED; +} + +/* HDQ Mode: always return success */ +static u8 omap_w1_reset_bus(void *_hdq) +{ + return 0; +} + +/* W1 search callback function */ +static void omap_w1_search_bus(void *_hdq, u8 search_type, + w1_slave_found_callback slave_found) +{ + u64 module_id, rn_le, cs, id; + + if (w1_id) + module_id = w1_id; + else + module_id = 0x1; + + rn_le = cpu_to_le64(module_id); + /* + * HDQ might not obey truly the 1-wire spec. + * So calculate CRC based on module parameter. + */ + cs = w1_calc_crc8((u8 *)&rn_le, 7); + id = (cs << 56) | module_id; + + slave_found(_hdq, id); +} + +static int _omap_hdq_reset(struct hdq_data *hdq_data) +{ + int ret; + u8 tmp_status; + + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET); + /* + * Select HDQ mode & enable clocks. + * It is observed that INT flags can't be cleared via a read and GO/INIT + * won't return to zero if interrupt is disabled. So we always enable + * interrupt. + */ + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + + /* wait for reset to complete */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS, + OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status); + if (ret) + dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x", + tmp_status); + else { + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, + OMAP_HDQ_SYSCONFIG_AUTOIDLE); + } + + return ret; +} + +/* Issue break pulse to the device */ +static int omap_hdq_break(struct hdq_data *hdq_data) +{ + int ret = 0; + u8 tmp_status; + unsigned long irqflags; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + ret = -EINTR; + goto rtn; + } + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + /* clear interrupt flags via a dummy read */ + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + /* ISR loads it with new INT_STATUS */ + hdq_data->hdq_irqstatus = 0; + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + + /* set the INIT and GO bit */ + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION | + OMAP_HDQ_CTRL_STATUS_GO); + + /* wait for the TIMEOUT bit */ + ret = wait_event_timeout(hdq_wait_queue, + hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); + if (ret == 0) { + dev_dbg(hdq_data->dev, "break wait elapsed\n"); + ret = -EINTR; + goto out; + } + + tmp_status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) { + dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x", + tmp_status); + ret = -ETIMEDOUT; + goto out; + } + /* + * wait for both INIT and GO bits rerurn to zero. + * zero wait time expected for interrupt mode. + */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_INITIALIZATION | + OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR, + &tmp_status); + if (ret) + dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits" + "return to zero, %x", tmp_status); + +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return ret; +} + +static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val) +{ + int ret = 0; + u8 status; + unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + ret = -EINTR; + goto rtn; + } + + if (!hdq_data->hdq_usecount) { + ret = -EINVAL; + goto out; + } + + if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); + /* + * The RX comes immediately after TX. It + * triggers another interrupt before we + * sleep. So we have to wait for RXCOMPLETE bit. + */ + while (!(hdq_data->hdq_irqstatus + & OMAP_HDQ_INT_STATUS_RXCOMPLETE) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0, + OMAP_HDQ_CTRL_STATUS_DIR); + status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { + dev_dbg(hdq_data->dev, "timeout waiting for" + "RXCOMPLETE, %x", status); + ret = -ETIMEDOUT; + goto out; + } + } + /* the data is ready. Read it in! */ + *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA); +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return 0; + +} + +/* Enable clocks and set the controller to HDQ mode */ +static int omap_hdq_get(struct hdq_data *hdq_data) +{ + int ret = 0; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + ret = -EINTR; + goto rtn; + } + + if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) { + dev_dbg(hdq_data->dev, "attempt to exceed the max use count"); + ret = -EINVAL; + goto out; + } else { + hdq_data->hdq_usecount++; + try_module_get(THIS_MODULE); + if (1 == hdq_data->hdq_usecount) { + if (clk_enable(hdq_data->hdq_ick)) { + dev_dbg(hdq_data->dev, "Can not enable ick\n"); + ret = -ENODEV; + goto clk_err; + } + if (clk_enable(hdq_data->hdq_fck)) { + dev_dbg(hdq_data->dev, "Can not enable fck\n"); + clk_disable(hdq_data->hdq_ick); + ret = -ENODEV; + goto clk_err; + } + + /* make sure HDQ is out of reset */ + if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) & + OMAP_HDQ_SYSSTATUS_RESETDONE)) { + ret = _omap_hdq_reset(hdq_data); + if (ret) + /* back up the count */ + hdq_data->hdq_usecount--; + } else { + /* select HDQ mode & enable clocks */ + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, + OMAP_HDQ_SYSCONFIG_AUTOIDLE); + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + } + } + } + +clk_err: + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return ret; +} + +/* Disable clocks to the module */ +static int omap_hdq_put(struct hdq_data *hdq_data) +{ + int ret = 0; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) + return -EINTR; + + if (0 == hdq_data->hdq_usecount) { + dev_dbg(hdq_data->dev, "attempt to decrement use count" + "when it is zero"); + ret = -EINVAL; + } else { + hdq_data->hdq_usecount--; + module_put(THIS_MODULE); + if (0 == hdq_data->hdq_usecount) { + clk_disable(hdq_data->hdq_ick); + clk_disable(hdq_data->hdq_fck); + } + } + mutex_unlock(&hdq_data->hdq_mutex); + + return ret; +} + +/* Read a byte of data from the device */ +static u8 omap_w1_read_byte(void *_hdq) +{ + struct hdq_data *hdq_data = _hdq; + u8 val = 0; + int ret; + + ret = hdq_read_byte(hdq_data, &val); + if (ret) { + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return -EINTR; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + omap_hdq_put(hdq_data); + return -1; + } + + /* Write followed by a read, release the module */ + if (hdq_data->init_trans) { + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return -EINTR; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + omap_hdq_put(hdq_data); + } + + return val; +} + +/* Write a byte of data to the device */ +static void omap_w1_write_byte(void *_hdq, u8 byte) +{ + struct hdq_data *hdq_data = _hdq; + int ret; + u8 status; + + /* First write to initialize the transfer */ + if (hdq_data->init_trans == 0) + omap_hdq_get(hdq_data); + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return; + } + hdq_data->init_trans++; + mutex_unlock(&hdq_data->hdq_mutex); + + ret = hdq_write_byte(hdq_data, byte, &status); + if (ret == 0) { + dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status); + return; + } + + /* Second write, data transfered. Release the module */ + if (hdq_data->init_trans > 1) { + omap_hdq_put(hdq_data); + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + } + + return; +} + +static int __init omap_hdq_probe(struct platform_device *pdev) +{ + struct hdq_data *hdq_data; + struct resource *res; + int ret, irq; + u8 rev; + + hdq_data = kmalloc(sizeof(*hdq_data), GFP_KERNEL); + if (!hdq_data) { + dev_dbg(&pdev->dev, "unable to allocate memory\n"); + ret = -ENOMEM; + goto err_kmalloc; + } + + hdq_data->dev = &pdev->dev; + platform_set_drvdata(pdev, hdq_data); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(&pdev->dev, "unable to get resource\n"); + ret = -ENXIO; + goto err_resource; + } + + hdq_data->hdq_base = ioremap(res->start, SZ_4K); + if (!hdq_data->hdq_base) { + dev_dbg(&pdev->dev, "ioremap failed\n"); + ret = -EINVAL; + goto err_ioremap; + } + + /* get interface & functional clock objects */ + hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick"); + hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck"); + + if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) { + dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n"); + if (IS_ERR(hdq_data->hdq_ick)) { + ret = PTR_ERR(hdq_data->hdq_ick); + goto err_clk; + } + if (IS_ERR(hdq_data->hdq_fck)) { + ret = PTR_ERR(hdq_data->hdq_fck); + clk_put(hdq_data->hdq_ick); + goto err_clk; + } + } + + hdq_data->hdq_usecount = 0; + mutex_init(&hdq_data->hdq_mutex); + + if (clk_enable(hdq_data->hdq_ick)) { + dev_dbg(&pdev->dev, "Can not enable ick\n"); + ret = -ENODEV; + goto err_intfclk; + } + + if (clk_enable(hdq_data->hdq_fck)) { + dev_dbg(&pdev->dev, "Can not enable fck\n"); + ret = -ENODEV; + goto err_fnclk; + } + + rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION); + dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n", + (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt"); + + spin_lock_init(&hdq_data->hdq_spinlock); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENXIO; + goto err_irq; + } + + ret = request_irq(irq, hdq_isr, IRQF_DISABLED, "omap_hdq", hdq_data); + if (ret < 0) { + dev_dbg(&pdev->dev, "could not request irq\n"); + goto err_irq; + } + + omap_hdq_break(hdq_data); + + /* don't clock the HDQ until it is needed */ + clk_disable(hdq_data->hdq_ick); + clk_disable(hdq_data->hdq_fck); + + omap_w1_master.data = hdq_data; + + ret = w1_add_master_device(&omap_w1_master); + if (ret) { + dev_dbg(&pdev->dev, "Failure in registering w1 master\n"); + goto err_w1; + } + + return 0; + +err_w1: +err_irq: + clk_disable(hdq_data->hdq_fck); + +err_fnclk: + clk_disable(hdq_data->hdq_ick); + +err_intfclk: + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); + +err_clk: + iounmap(hdq_data->hdq_base); + +err_ioremap: +err_resource: + platform_set_drvdata(pdev, NULL); + kfree(hdq_data); + +err_kmalloc: + return ret; + +} + +static int omap_hdq_remove(struct platform_device *pdev) +{ + struct hdq_data *hdq_data = platform_get_drvdata(pdev); + + mutex_lock(&hdq_data->hdq_mutex); + + if (hdq_data->hdq_usecount) { + dev_dbg(&pdev->dev, "removed when use count is not zero\n"); + return -EBUSY; + } + + mutex_unlock(&hdq_data->hdq_mutex); + + /* remove module dependency */ + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); + free_irq(INT_24XX_HDQ_IRQ, hdq_data); + platform_set_drvdata(pdev, NULL); + iounmap(hdq_data->hdq_base); + kfree(hdq_data); + + return 0; +} + +static int __init +omap_hdq_init(void) +{ + return platform_driver_register(&omap_hdq_driver); +} +module_init(omap_hdq_init); + +static void __exit +omap_hdq_exit(void) +{ + platform_driver_unregister(&omap_hdq_driver); +} +module_exit(omap_hdq_exit); + +module_param(w1_id, int, S_IRUSR); +MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection"); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("HDQ driver Library"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From cfbc619033d3a2eee8f7aa9314e21b96cf34d399 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:11 -0800 Subject: hdq: bQ27000 HDQ Slave Interface Driver Provide the BQ27000 slave interface driver. Signed-off-by: Madhusudhan Chikkature Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/slaves/Kconfig | 7 +++ drivers/w1/slaves/Makefile | 2 +- drivers/w1/slaves/w1_bq27000.c | 123 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 131 insertions(+), 1 deletion(-) create mode 100644 drivers/w1/slaves/w1_bq27000.c diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 3df29a122f84..8d0b1fb1e52e 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -44,4 +44,11 @@ config W1_SLAVE_DS2760 If you are unsure, say N. +config W1_SLAVE_BQ27000 + tristate "BQ27000 slave support" + depends on W1 + help + Say Y here if you want to use a hdq + bq27000 slave support. + endmenu diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index a8eb7524df1d..990f400b6d22 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -6,4 +6,4 @@ obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o - +obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c new file mode 100644 index 000000000000..8f4c91f6c680 --- /dev/null +++ b/drivers/w1/slaves/w1_bq27000.c @@ -0,0 +1,123 @@ +/* + * drivers/w1/slaves/w1_bq27000.c + * + * Copyright (C) 2007 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#include +#include +#include +#include +#include +#include + +#include "../w1.h" +#include "../w1_int.h" +#include "../w1_family.h" + +#define HDQ_CMD_READ (0) +#define HDQ_CMD_WRITE (1<<7) + +static int F_ID; + +void w1_bq27000_write(struct device *dev, u8 buf, u8 reg) +{ + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + + if (!dev) { + pr_info("Could not obtain slave dev ptr\n"); + return; + } + + w1_write_8(sl->master, HDQ_CMD_WRITE | reg); + w1_write_8(sl->master, buf); +} +EXPORT_SYMBOL(w1_bq27000_write); + +int w1_bq27000_read(struct device *dev, u8 reg) +{ + u8 val; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + + if (!dev) + return 0; + + w1_write_8(sl->master, HDQ_CMD_READ | reg); + val = w1_read_8(sl->master); + + return val; +} +EXPORT_SYMBOL(w1_bq27000_read); + +static int w1_bq27000_add_slave(struct w1_slave *sl) +{ + int ret; + int id = 1; + struct platform_device *pdev; + + pdev = platform_device_alloc("bq27000-battery", id); + if (!pdev) { + ret = -ENOMEM; + return ret; + } + pdev->dev.parent = &sl->dev; + + ret = platform_device_add(pdev); + if (ret) + goto pdev_add_failed; + + dev_set_drvdata(&sl->dev, pdev); + + goto success; + +pdev_add_failed: + platform_device_unregister(pdev); +success: + return ret; +} + +static void w1_bq27000_remove_slave(struct w1_slave *sl) +{ + struct platform_device *pdev = dev_get_drvdata(&sl->dev); + + platform_device_unregister(pdev); +} + +static struct w1_family_ops w1_bq27000_fops = { + .add_slave = w1_bq27000_add_slave, + .remove_slave = w1_bq27000_remove_slave, +}; + +static struct w1_family w1_bq27000_family = { + .fid = 1, + .fops = &w1_bq27000_fops, +}; + +static int __init w1_bq27000_init(void) +{ + if (F_ID) + w1_bq27000_family.fid = F_ID; + + return w1_register_family(&w1_bq27000_family); +} + +static void __exit w1_bq27000_exit(void) +{ + w1_unregister_family(&w1_bq27000_family); +} + + +module_init(w1_bq27000_init); +module_exit(w1_bq27000_exit); + +module_param(F_ID, int, S_IRUSR); +MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments Ltd"); +MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip"); -- cgit v1.2.3 From e0a29382c6f51c278a7e9a788917ff9182f3dba6 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:12 -0800 Subject: hdq: documentation for OMAP HDQ Add a brief document about omap2430/3430 HDQ/1-wire driver. Signed-off-by: Madhusudhan Chikkature Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/w1/masters/omap-hdq | 46 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/w1/masters/omap-hdq diff --git a/Documentation/w1/masters/omap-hdq b/Documentation/w1/masters/omap-hdq new file mode 100644 index 000000000000..ca722e09b6a1 --- /dev/null +++ b/Documentation/w1/masters/omap-hdq @@ -0,0 +1,46 @@ +Kernel driver for omap HDQ/1-wire module. +======================================== + +Supported chips: +================ + HDQ/1-wire controller on the TI OMAP 2430/3430 platforms. + +A useful link about HDQ basics: +=============================== +http://focus.ti.com/lit/an/slua408/slua408.pdf + +Description: +============ +The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware +protocol of the master functions of the Benchmark HDQ and the Dallas +Semiconductor 1-Wire protocols. These protocols use a single wire for +communication between the master (HDQ/1-Wire controller) and the slave +(HDQ/1-Wire external compliant device). + +A typical application of the HDQ/1-Wire module is the communication with battery +monitor (gas gauge) integrated circuits. + +The controller supports operation in both HDQ and 1-wire mode. The essential +difference between the HDQ and 1-wire mode is how the slave device responds to +initialization pulse.In HDQ mode, the firmware does not require the host to +create an initialization pulse to the slave.However, the slave can be reset by +using an initialization pulse (also referred to as a break pulse).The slave +does not respond with a presence pulse as it does in the 1-Wire protocol. + +Remarks: +======== +The driver (drivers/w1/masters/omap_hdq.c) supports the HDQ mode of the +controller. In this mode, as we can not read the ID which obeys the W1 +spec(family:id:crc), a module parameter can be passed to the driver which will +be used to calculate the CRC and pass back an appropriate slave ID to the W1 +core. + +By default the master driver and the BQ slave i/f +driver(drivers/w1/slaves/w1_bq27000.c) sets the ID to 1. +Please note to load both the modules with a different ID if required, but note +that the ID used should be same for both master and slave driver loading. + +e.g: +insmod omap_hdq.ko W1_ID=2 +inamod w1_bq27000.ko F_ID=2 + -- cgit v1.2.3 From 4e17e1db96474af5620e3259754df4cb1c46521c Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 12 Nov 2008 13:27:12 -0800 Subject: Add c2 port support C2port implements a two wire serial communication protocol (bit banging) designed to enable in-system programming, debugging, and boundary-scan testing on low pin-count Silicon Labs devices. Currently this code supports only flash programming through sysfs interface but extensions shoud be easy to add. Signed-off-by: Rodolfo Giometti Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-c2port | 88 +++ Documentation/c2port.txt | 90 +++ drivers/misc/Kconfig | 2 + drivers/misc/Makefile | 1 + drivers/misc/c2port/Kconfig | 24 + drivers/misc/c2port/Makefile | 1 + drivers/misc/c2port/core.c | 1002 ++++++++++++++++++++++++++++++++ include/linux/c2port.h | 65 +++ 8 files changed, 1273 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-c2port create mode 100644 Documentation/c2port.txt create mode 100644 drivers/misc/c2port/Kconfig create mode 100644 drivers/misc/c2port/Makefile create mode 100644 drivers/misc/c2port/core.c create mode 100644 include/linux/c2port.h diff --git a/Documentation/ABI/testing/sysfs-c2port b/Documentation/ABI/testing/sysfs-c2port new file mode 100644 index 000000000000..716cffc457e9 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-c2port @@ -0,0 +1,88 @@ +What: /sys/class/c2port/ +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/ directory will contain files and + directories that will provide a unified interface to + the C2 port interface. + +What: /sys/class/c2port/c2portX +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/ directory is related to X-th + C2 port into the system. Each directory will contain files to + manage and control its C2 port. + +What: /sys/class/c2port/c2portX/access +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/access file enable the access + to the C2 port from the system. No commands can be sent + till this entry is set to 0. + +What: /sys/class/c2port/c2portX/dev_id +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/dev_id file show the device ID + of the connected micro. + +What: /sys/class/c2port/c2portX/flash_access +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_access file enable the + access to the on-board flash of the connected micro. + No commands can be sent till this entry is set to 0. + +What: /sys/class/c2port/c2portX/flash_block_size +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_block_size file show + the on-board flash block size of the connected micro. + +What: /sys/class/c2port/c2portX/flash_blocks_num +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_blocks_num file show + the on-board flash blocks number of the connected micro. + +What: /sys/class/c2port/c2portX/flash_data +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_data file export + the content of the on-board flash of the connected micro. + +What: /sys/class/c2port/c2portX/flash_erase +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_erase file execute + the "erase" command on the on-board flash of the connected + micro. + +What: /sys/class/c2port/c2portX/flash_erase +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_erase file show the + on-board flash size of the connected micro. + +What: /sys/class/c2port/c2portX/reset +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/reset file execute a "reset" + command on the connected micro. + +What: /sys/class/c2port/c2portX/rev_id +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/rev_id file show the revision ID + of the connected micro. diff --git a/Documentation/c2port.txt b/Documentation/c2port.txt new file mode 100644 index 000000000000..d9bf93ea4398 --- /dev/null +++ b/Documentation/c2port.txt @@ -0,0 +1,90 @@ + C2 port support + --------------- + +(C) Copyright 2007 Rodolfo Giometti + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + + + +Overview +-------- + +This driver implements the support for Linux of Silicon Labs (Silabs) +C2 Interface used for in-system programming of micro controllers. + +By using this driver you can reprogram the in-system flash without EC2 +or EC3 debug adapter. This solution is also useful in those systems +where the micro controller is connected via special GPIOs pins. + +References +---------- + +The C2 Interface main references are at (http://www.silabs.com) +Silicon Laboratories site], see: + +- AN127: FLASH Programming via the C2 Interface at +http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/Small_Form_Factor/en/an127.pdf, and + +- C2 Specification at +http://www.silabs.com/public/documents/tpub_doc/spec/Microcontrollers/en/C2spec.pdf, + +however it implements a two wire serial communication protocol (bit +banging) designed to enable in-system programming, debugging, and +boundary-scan testing on low pin-count Silicon Labs devices. Currently +this code supports only flash programming but extensions are easy to +add. + +Using the driver +---------------- + +Once the driver is loaded you can use sysfs support to get C2port's +info or read/write in-system flash. + +# ls /sys/class/c2port/c2port0/ +access flash_block_size flash_erase rev_id +dev_id flash_blocks_num flash_size subsystem/ +flash_access flash_data reset uevent + +Initially the C2port access is disabled since you hardware may have +such lines multiplexed with other devices so, to get access to the +C2port, you need the command: + +# echo 1 > /sys/class/c2port/c2port0/access + +after that you should read the device ID and revision ID of the +connected micro controller: + +# cat /sys/class/c2port/c2port0/dev_id +8 +# cat /sys/class/c2port/c2port0/rev_id +1 + +However, for security reasons, the in-system flash access in not +enabled yet, to do so you need the command: + +# echo 1 > /sys/class/c2port/c2port0/flash_access + +After that you can read the whole flash: + +# cat /sys/class/c2port/c2port0/flash_data > image + +erase it: + +# echo 1 > /sys/class/c2port/c2port0/flash_erase + +and write it: + +# cat image > /sys/class/c2port/c2port0/flash_data + +after writing you have to reset the device to execute the new code: + +# echo 1 > /sys/class/c2port/c2port0/reset diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index dcac7ca76937..fee7304102af 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -498,4 +498,6 @@ config SGI_GRU_DEBUG This option enables addition debugging code for the SGI GRU driver. If you are unsure, say N. +source "drivers/misc/c2port/Kconfig" + endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index bb14633d1362..817f7f5ab3bd 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -32,3 +32,4 @@ obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o +obj-$(CONFIG_C2PORT) += c2port/ diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig new file mode 100644 index 000000000000..f1bad2b40329 --- /dev/null +++ b/drivers/misc/c2port/Kconfig @@ -0,0 +1,24 @@ +# +# C2 port devices +# + +menuconfig C2PORT + tristate "Silicon Labs C2 port support (EXPERIMENTAL)" + depends on EXPERIMENTAL + default no + help + This option enables support for Silicon Labs C2 port used to + program Silicon micro controller chips (and other 8051 compatible). + + If your board have no such micro controllers you don't need this + interface at all. + + To compile this driver as a module, choose M here: the module will + be called c2port_core. Note that you also need a client module + usually called c2port-*. + + If you are not sure, say N here. + +if C2PORT + +endif # C2PORT diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile new file mode 100644 index 000000000000..3c610a2ba5ec --- /dev/null +++ b/drivers/misc/c2port/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_C2PORT) += core.o diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c new file mode 100644 index 000000000000..976b35d1d035 --- /dev/null +++ b/drivers/misc/c2port/core.c @@ -0,0 +1,1002 @@ +/* + * Silicon Labs C2 port core Linux support + * + * Copyright (c) 2007 Rodolfo Giometti + * Copyright (c) 2007 Eurotech S.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRIVER_NAME "c2port" +#define DRIVER_VERSION "0.51.0" + +static DEFINE_SPINLOCK(c2port_idr_lock); +static DEFINE_IDR(c2port_idr); + +/* + * Local variables + */ + +static struct class *c2port_class; + +/* + * C2 registers & commands defines + */ + +/* C2 registers */ +#define C2PORT_DEVICEID 0x00 +#define C2PORT_REVID 0x01 +#define C2PORT_FPCTL 0x02 +#define C2PORT_FPDAT 0xB4 + +/* C2 interface commands */ +#define C2PORT_GET_VERSION 0x01 +#define C2PORT_DEVICE_ERASE 0x03 +#define C2PORT_BLOCK_READ 0x06 +#define C2PORT_BLOCK_WRITE 0x07 +#define C2PORT_PAGE_ERASE 0x08 + +/* C2 status return codes */ +#define C2PORT_INVALID_COMMAND 0x00 +#define C2PORT_COMMAND_FAILED 0x02 +#define C2PORT_COMMAND_OK 0x0d + +/* + * C2 port low level signal managements + */ + +static void c2port_reset(struct c2port_device *dev) +{ + struct c2port_ops *ops = dev->ops; + + /* To reset the device we have to keep clock line low for at least + * 20us. + */ + local_irq_disable(); + ops->c2ck_set(dev, 0); + udelay(25); + ops->c2ck_set(dev, 1); + local_irq_enable(); + + udelay(1); +} + +static void c2port_strobe_ck(struct c2port_device *dev) +{ + struct c2port_ops *ops = dev->ops; + + /* During hi-low-hi transition we disable local IRQs to avoid + * interructions since C2 port specification says that it must be + * shorter than 5us, otherwise the microcontroller may consider + * it as a reset signal! + */ + local_irq_disable(); + ops->c2ck_set(dev, 0); + udelay(1); + ops->c2ck_set(dev, 1); + local_irq_enable(); + + udelay(1); +} + +/* + * C2 port basic functions + */ + +static void c2port_write_ar(struct c2port_device *dev, u8 addr) +{ + struct c2port_ops *ops = dev->ops; + int i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (11b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + + /* ADDRESS field */ + for (i = 0; i < 8; i++) { + ops->c2d_set(dev, addr & 0x01); + c2port_strobe_ck(dev); + + addr >>= 1; + } + + /* STOP field */ + ops->c2d_dir(dev, 1); + c2port_strobe_ck(dev); +} + +static int c2port_read_ar(struct c2port_device *dev, u8 *addr) +{ + struct c2port_ops *ops = dev->ops; + int i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (10b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + + /* ADDRESS field */ + ops->c2d_dir(dev, 1); + *addr = 0; + for (i = 0; i < 8; i++) { + *addr >>= 1; /* shift in 8-bit ADDRESS field LSB first */ + + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + *addr |= 0x80; + } + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_write_dr(struct c2port_device *dev, u8 data) +{ + struct c2port_ops *ops = dev->ops; + int timeout, i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (01b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* LENGTH field (00b, LSB first -> 1 byte) */ + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* DATA field */ + for (i = 0; i < 8; i++) { + ops->c2d_set(dev, data & 0x01); + c2port_strobe_ck(dev); + + data >>= 1; + } + + /* WAIT field */ + ops->c2d_dir(dev, 1); + timeout = 20; + do { + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_read_dr(struct c2port_device *dev, u8 *data) +{ + struct c2port_ops *ops = dev->ops; + int timeout, i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (00b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* LENGTH field (00b, LSB first -> 1 byte) */ + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* WAIT field */ + ops->c2d_dir(dev, 1); + timeout = 20; + do { + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + /* DATA field */ + *data = 0; + for (i = 0; i < 8; i++) { + *data >>= 1; /* shift in 8-bit DATA field LSB first */ + + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + *data |= 0x80; + } + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_poll_in_busy(struct c2port_device *dev) +{ + u8 addr; + int ret, timeout = 20; + + do { + ret = (c2port_read_ar(dev, &addr)); + if (ret < 0) + return -EIO; + + if (!(addr & 0x02)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + return 0; +} + +static int c2port_poll_out_ready(struct c2port_device *dev) +{ + u8 addr; + int ret, timeout = 10000; /* erase flash needs long time... */ + + do { + ret = (c2port_read_ar(dev, &addr)); + if (ret < 0) + return -EIO; + + if (addr & 0x01) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + return 0; +} + +/* + * sysfs methods + */ + +static ssize_t c2port_show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", c2dev->name); +} + +static ssize_t c2port_show_flash_blocks_num(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->blocks_num); +} + +static ssize_t c2port_show_flash_block_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->block_size); +} + +static ssize_t c2port_show_flash_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->blocks_num * ops->block_size); +} + +static ssize_t c2port_show_access(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", c2dev->access); +} + +static ssize_t c2port_store_access(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + int status, ret; + + ret = sscanf(buf, "%d", &status); + if (ret != 1) + return -EINVAL; + + mutex_lock(&c2dev->mutex); + + c2dev->access = !!status; + + /* If access is "on" clock should be HIGH _before_ setting the line + * as output and data line should be set as INPUT anyway */ + if (c2dev->access) + ops->c2ck_set(c2dev, 1); + ops->access(c2dev, c2dev->access); + if (c2dev->access) + ops->c2d_dir(c2dev, 1); + + mutex_unlock(&c2dev->mutex); + + return count; +} + +static ssize_t c2port_store_reset(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + + c2port_reset(c2dev); + c2dev->flash_access = 0; + + mutex_unlock(&c2dev->mutex); + + return count; +} + +static ssize_t __c2port_show_dev_id(struct c2port_device *dev, char *buf) +{ + u8 data; + int ret; + + /* Select DEVICEID register for C2 data register accesses */ + c2port_write_ar(dev, C2PORT_DEVICEID); + + /* Read and return the device ID register */ + ret = c2port_read_dr(dev, &data); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t c2port_show_dev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_show_dev_id(c2dev, buf); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(dev, "cannot read from %s\n", c2dev->name); + + return ret; +} + +static ssize_t __c2port_show_rev_id(struct c2port_device *dev, char *buf) +{ + u8 data; + int ret; + + /* Select REVID register for C2 data register accesses */ + c2port_write_ar(dev, C2PORT_REVID); + + /* Read and return the revision ID register */ + ret = c2port_read_dr(dev, &data); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t c2port_show_rev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_show_rev_id(c2dev, buf); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot read from %s\n", c2dev->name); + + return ret; +} + +static ssize_t c2port_show_flash_access(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", c2dev->flash_access); +} + +static ssize_t __c2port_store_flash_access(struct c2port_device *dev, + int status) +{ + int ret; + + /* Check the device access status */ + if (!dev->access) + return -EBUSY; + + dev->flash_access = !!status; + + /* If flash_access is off we have nothing to do... */ + if (dev->flash_access == 0) + return 0; + + /* Target the C2 flash programming control register for C2 data + * register access */ + c2port_write_ar(dev, C2PORT_FPCTL); + + /* Write the first keycode to enable C2 Flash programming */ + ret = c2port_write_dr(dev, 0x02); + if (ret < 0) + return ret; + + /* Write the second keycode to enable C2 Flash programming */ + ret = c2port_write_dr(dev, 0x01); + if (ret < 0) + return ret; + + /* Delay for at least 20ms to ensure the target is ready for + * C2 flash programming */ + mdelay(25); + + return 0; +} + +static ssize_t c2port_store_flash_access(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + int status; + ssize_t ret; + + ret = sscanf(buf, "%d", &status); + if (ret != 1) + return -EINVAL; + + mutex_lock(&c2dev->mutex); + ret = __c2port_store_flash_access(c2dev, status); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) { + dev_err(c2dev->dev, "cannot enable %s flash programming\n", + c2dev->name); + return ret; + } + + return count; +} + +static ssize_t __c2port_write_flash_erase(struct c2port_device *dev) +{ + u8 status; + int ret; + + /* Target the C2 flash programming data register for C2 data register + * access. + */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send device erase command */ + c2port_write_dr(dev, C2PORT_DEVICE_ERASE); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send a three-byte arming sequence to enable the device erase. + * If the sequence is not received correctly, the command will be + * ignored. + * Sequence is: 0xde, 0xad, 0xa5. + */ + c2port_write_dr(dev, 0xde); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + c2port_write_dr(dev, 0xad); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + c2port_write_dr(dev, 0xa5); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + return 0; +} + +static ssize_t c2port_store_flash_erase(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + int ret; + + /* Check the device and flash access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_write_flash_erase(c2dev); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) { + dev_err(c2dev->dev, "cannot erase %s flash\n", c2dev->name); + return ret; + } + + return count; +} + +static ssize_t __c2port_read_flash_data(struct c2port_device *dev, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_ops *ops = dev->ops; + u8 status, nread = 128; + int i, ret; + + /* Check for flash end */ + if (offset >= ops->block_size * ops->blocks_num) + return 0; + + if (ops->block_size * ops->blocks_num - offset < nread) + nread = ops->block_size * ops->blocks_num - offset; + if (count < nread) + nread = count; + if (nread == 0) + return nread; + + /* Target the C2 flash programming data register for C2 data register + * access */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send flash block read command */ + c2port_write_dr(dev, C2PORT_BLOCK_READ); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send address high byte */ + c2port_write_dr(dev, offset >> 8); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address low byte */ + c2port_write_dr(dev, offset & 0x00ff); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address block size */ + c2port_write_dr(dev, nread); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before reading FLASH block */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Read flash block */ + for (i = 0; i < nread; i++) { + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + ret = c2port_read_dr(dev, buffer+i); + if (ret < 0) + return ret; + } + + return nread; +} + +static ssize_t c2port_read_flash_data(struct kobject *kobj, + struct bin_attribute *attr, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_device *c2dev = + dev_get_drvdata(container_of(kobj, + struct device, kobj)); + ssize_t ret; + + /* Check the device and flash access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_read_flash_data(c2dev, buffer, offset, count); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot read %s flash\n", c2dev->name); + + return ret; +} + +static ssize_t __c2port_write_flash_data(struct c2port_device *dev, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_ops *ops = dev->ops; + u8 status, nwrite = 128; + int i, ret; + + if (nwrite > count) + nwrite = count; + if (ops->block_size * ops->blocks_num - offset < nwrite) + nwrite = ops->block_size * ops->blocks_num - offset; + + /* Check for flash end */ + if (offset >= ops->block_size * ops->blocks_num) + return -EINVAL; + + /* Target the C2 flash programming data register for C2 data register + * access */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send flash block write command */ + c2port_write_dr(dev, C2PORT_BLOCK_WRITE); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send address high byte */ + c2port_write_dr(dev, offset >> 8); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address low byte */ + c2port_write_dr(dev, offset & 0x00ff); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address block size */ + c2port_write_dr(dev, nwrite); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before writing FLASH block */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Write flash block */ + for (i = 0; i < nwrite; i++) { + ret = c2port_write_dr(dev, *(buffer+i)); + if (ret < 0) + return ret; + + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + } + + /* Wait for last flash write to complete */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + return nwrite; +} + +static ssize_t c2port_write_flash_data(struct kobject *kobj, + struct bin_attribute *attr, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_device *c2dev = + dev_get_drvdata(container_of(kobj, + struct device, kobj)); + int ret; + + /* Check the device access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_write_flash_data(c2dev, buffer, offset, count); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot write %s flash\n", c2dev->name); + + return ret; +} + +/* + * Class attributes + */ + +static struct device_attribute c2port_attrs[] = { + __ATTR(name, 0444, c2port_show_name, NULL), + __ATTR(flash_blocks_num, 0444, c2port_show_flash_blocks_num, NULL), + __ATTR(flash_block_size, 0444, c2port_show_flash_block_size, NULL), + __ATTR(flash_size, 0444, c2port_show_flash_size, NULL), + __ATTR(access, 0644, c2port_show_access, c2port_store_access), + __ATTR(reset, 0200, NULL, c2port_store_reset), + __ATTR(dev_id, 0444, c2port_show_dev_id, NULL), + __ATTR(rev_id, 0444, c2port_show_rev_id, NULL), + + __ATTR(flash_access, 0644, c2port_show_flash_access, + c2port_store_flash_access), + __ATTR(flash_erase, 0200, NULL, c2port_store_flash_erase), + __ATTR_NULL, +}; + +static struct bin_attribute c2port_bin_attrs = { + .attr = { + .name = "flash_data", + .mode = 0644 + }, + .read = c2port_read_flash_data, + .write = c2port_write_flash_data, + /* .size is computed at run-time */ +}; + +/* + * Exported functions + */ + +struct c2port_device *c2port_device_register(char *name, + struct c2port_ops *ops, void *devdata) +{ + struct c2port_device *c2dev; + int id, ret; + + if (unlikely(!ops) || unlikely(!ops->access) || \ + unlikely(!ops->c2d_dir) || unlikely(!ops->c2ck_set) || \ + unlikely(!ops->c2d_get) || unlikely(!ops->c2d_set)) + return ERR_PTR(-EINVAL); + + c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL); + if (unlikely(!c2dev)) + return ERR_PTR(-ENOMEM); + + ret = idr_pre_get(&c2port_idr, GFP_KERNEL); + if (!ret) { + ret = -ENOMEM; + goto error_idr_get_new; + } + + spin_lock_irq(&c2port_idr_lock); + ret = idr_get_new(&c2port_idr, c2dev, &id); + spin_unlock_irq(&c2port_idr_lock); + + if (ret < 0) + goto error_idr_get_new; + c2dev->id = id; + + c2dev->dev = device_create(c2port_class, NULL, 0, c2dev, + "c2port%d", id); + if (unlikely(!c2dev->dev)) { + ret = -ENOMEM; + goto error_device_create; + } + dev_set_drvdata(c2dev->dev, c2dev); + + strncpy(c2dev->name, name, C2PORT_NAME_LEN); + c2dev->ops = ops; + mutex_init(&c2dev->mutex); + + /* Create binary file */ + c2port_bin_attrs.size = ops->blocks_num * ops->block_size; + ret = device_create_bin_file(c2dev->dev, &c2port_bin_attrs); + if (unlikely(ret)) + goto error_device_create_bin_file; + + /* By default C2 port access is off */ + c2dev->access = c2dev->flash_access = 0; + ops->access(c2dev, 0); + + dev_info(c2dev->dev, "C2 port %s added\n", name); + dev_info(c2dev->dev, "%s flash has %d blocks x %d bytes " + "(%d bytes total)\n", + name, ops->blocks_num, ops->block_size, + ops->blocks_num * ops->block_size); + + return c2dev; + +error_device_create_bin_file: + device_destroy(c2port_class, 0); + +error_device_create: + spin_lock_irq(&c2port_idr_lock); + idr_remove(&c2port_idr, id); + spin_unlock_irq(&c2port_idr_lock); + +error_idr_get_new: + kfree(c2dev); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL(c2port_device_register); + +void c2port_device_unregister(struct c2port_device *c2dev) +{ + if (!c2dev) + return; + + dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name); + + device_remove_bin_file(c2dev->dev, &c2port_bin_attrs); + spin_lock_irq(&c2port_idr_lock); + idr_remove(&c2port_idr, c2dev->id); + spin_unlock_irq(&c2port_idr_lock); + + device_destroy(c2port_class, c2dev->id); + + kfree(c2dev); +} +EXPORT_SYMBOL(c2port_device_unregister); + +/* + * Module stuff + */ + +static int __init c2port_init(void) +{ + printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION + " - (C) 2007 Rodolfo Giometti\n"); + + c2port_class = class_create(THIS_MODULE, "c2port"); + if (!c2port_class) { + printk(KERN_ERR "c2port: failed to allocate class\n"); + return -ENOMEM; + } + c2port_class->dev_attrs = c2port_attrs; + + return 0; +} + +static void __exit c2port_exit(void) +{ + class_destroy(c2port_class); +} + +module_init(c2port_init); +module_exit(c2port_exit); + +MODULE_AUTHOR("Rodolfo Giometti "); +MODULE_DESCRIPTION("Silicon Labs C2 port support v. " DRIVER_VERSION); +MODULE_LICENSE("GPL"); diff --git a/include/linux/c2port.h b/include/linux/c2port.h new file mode 100644 index 000000000000..7b5a2388ba67 --- /dev/null +++ b/include/linux/c2port.h @@ -0,0 +1,65 @@ +/* + * Silicon Labs C2 port Linux support + * + * Copyright (c) 2007 Rodolfo Giometti + * Copyright (c) 2007 Eurotech S.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include + +#define C2PORT_NAME_LEN 32 + +/* + * C2 port basic structs + */ + +/* Main struct */ +struct c2port_ops; +struct c2port_device { + unsigned int access:1; + unsigned int flash_access:1; + + int id; + char name[C2PORT_NAME_LEN]; + struct c2port_ops *ops; + struct mutex mutex; /* prevent races during read/write */ + + struct device *dev; + + void *private_data; +}; + +/* Basic operations */ +struct c2port_ops { + /* Flash layout */ + unsigned short block_size; /* flash block size in bytes */ + unsigned short blocks_num; /* flash blocks number */ + + /* Enable or disable the access to C2 port */ + void (*access)(struct c2port_device *dev, int status); + + /* Set C2D data line as input/output */ + void (*c2d_dir)(struct c2port_device *dev, int dir); + + /* Read/write C2D data line */ + int (*c2d_get)(struct c2port_device *dev); + void (*c2d_set)(struct c2port_device *dev, int status); + + /* Write C2CK clock line */ + void (*c2ck_set)(struct c2port_device *dev, int status); +}; + +/* + * Exported functions + */ + +#define to_class_dev(obj) container_of((obj), struct class_device, kobj) +#define to_c2port_device(obj) container_of((obj), struct c2port_device, class) + +extern struct c2port_device *c2port_device_register(char *name, + struct c2port_ops *ops, void *devdata); +extern void c2port_device_unregister(struct c2port_device *dev); -- cgit v1.2.3 From 65131cd52b9e7c5814298e05c3b7843f13e78d24 Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 12 Nov 2008 13:27:14 -0800 Subject: c2port: add c2port support for Eurotech Duramar 2150 Signed-off-by: Rodolfo Giometti Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/c2port/Kconfig | 11 +++ drivers/misc/c2port/Makefile | 2 + drivers/misc/c2port/c2port-duramar2150.c | 158 +++++++++++++++++++++++++++++++ 3 files changed, 171 insertions(+) create mode 100644 drivers/misc/c2port/c2port-duramar2150.c diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig index f1bad2b40329..e46af9a5810d 100644 --- a/drivers/misc/c2port/Kconfig +++ b/drivers/misc/c2port/Kconfig @@ -21,4 +21,15 @@ menuconfig C2PORT if C2PORT +config C2PORT_DURAMAR_2150 + tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)" + depends on X86 && C2PORT + default no + help + This option enables C2 support for the Eurotech's Duramar 2150 + on board micro controller. + + To compile this driver as a module, choose M here: the module will + be called c2port-duramar2150. + endif # C2PORT diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile index 3c610a2ba5ec..3b2cf43d60f5 100644 --- a/drivers/misc/c2port/Makefile +++ b/drivers/misc/c2port/Makefile @@ -1 +1,3 @@ obj-$(CONFIG_C2PORT) += core.o + +obj-$(CONFIG_C2PORT_DURAMAR_2150) += c2port-duramar2150.o diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c new file mode 100644 index 000000000000..338dcc121507 --- /dev/null +++ b/drivers/misc/c2port/c2port-duramar2150.c @@ -0,0 +1,158 @@ +/* + * Silicon Labs C2 port Linux support for Eurotech Duramar 2150 + * + * Copyright (c) 2008 Rodolfo Giometti + * Copyright (c) 2008 Eurotech S.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DATA_PORT 0x325 +#define DIR_PORT 0x326 +#define C2D (1 << 0) +#define C2CK (1 << 1) + +static DEFINE_MUTEX(update_lock); + +/* + * C2 port operations + */ + +static void duramar2150_c2port_access(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DIR_PORT); + + /* 0 = input, 1 = output */ + if (status) + outb(v | (C2D | C2CK), DIR_PORT); + else + /* When access is "off" is important that both lines are set + * as inputs or hi-impedence */ + outb(v & ~(C2D | C2CK), DIR_PORT); + + mutex_unlock(&update_lock); +} + +static void duramar2150_c2port_c2d_dir(struct c2port_device *dev, int dir) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DIR_PORT); + + if (dir) + outb(v & ~C2D, DIR_PORT); + else + outb(v | C2D, DIR_PORT); + + mutex_unlock(&update_lock); +} + +static int duramar2150_c2port_c2d_get(struct c2port_device *dev) +{ + return inb(DATA_PORT) & C2D; +} + +static void duramar2150_c2port_c2d_set(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DATA_PORT); + + if (status) + outb(v | C2D, DATA_PORT); + else + outb(v & ~C2D, DATA_PORT); + + mutex_unlock(&update_lock); +} + +static void duramar2150_c2port_c2ck_set(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DATA_PORT); + + if (status) + outb(v | C2CK, DATA_PORT); + else + outb(v & ~C2CK, DATA_PORT); + + mutex_unlock(&update_lock); +} + +static struct c2port_ops duramar2150_c2port_ops = { + .block_size = 512, /* bytes */ + .blocks_num = 30, /* total flash size: 15360 bytes */ + + .access = duramar2150_c2port_access, + .c2d_dir = duramar2150_c2port_c2d_dir, + .c2d_get = duramar2150_c2port_c2d_get, + .c2d_set = duramar2150_c2port_c2d_set, + .c2ck_set = duramar2150_c2port_c2ck_set, +}; + +static struct c2port_device *duramar2150_c2port_dev; + +/* + * Module stuff + */ + +static int __init duramar2150_c2port_init(void) +{ + struct resource *res; + int ret = 0; + + res = request_region(0x325, 2, "c2port"); + if (!res) + return -EBUSY; + + duramar2150_c2port_dev = c2port_device_register("uc", + &duramar2150_c2port_ops, NULL); + if (!duramar2150_c2port_dev) { + ret = -ENODEV; + goto free_region; + } + + return 0; + +free_region: + release_region(0x325, 2); + return ret; +} + +static void __exit duramar2150_c2port_exit(void) +{ + /* Setup the GPIOs as input by default (access = 0) */ + duramar2150_c2port_access(duramar2150_c2port_dev, 0); + + c2port_device_unregister(duramar2150_c2port_dev); + + release_region(0x325, 2); +} + +module_init(duramar2150_c2port_init); +module_exit(duramar2150_c2port_exit); + +MODULE_AUTHOR("Rodolfo Giometti "); +MODULE_DESCRIPTION("Silicon Labs C2 port Linux support for Duramar 2150"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From bff4056c8b868a4311d5ebd6cbbf09a2c10f4551 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 13 Nov 2008 15:28:21 +0900 Subject: i2c: fix i2c-sh_mobile rx underrun Fix receive path underrun in i2c-sh_mobile driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/i2c/busses/i2c-sh_mobile.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 640cbb237328..3384a717fec0 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -318,7 +318,8 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) } else data = i2c_op(pd, OP_RX, 0); - pd->msg->buf[real_pos] = data; + if (real_pos >= 0) + pd->msg->buf[real_pos] = data; } while (0); pd->pos++; -- cgit v1.2.3 From bfbedf787c6b77270679429caadb044b2d33c94c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 13 Nov 2008 15:33:45 +0900 Subject: sh: early printk port type fix Add PORT_SCIF to unbreak the early printk code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/early_printk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 6b7d166694e2..98a29a782301 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -75,6 +75,7 @@ static struct console bios_console = { #endif static struct uart_port scif_port = { + .type = PORT_SCIF, .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT, .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT, }; -- cgit v1.2.3 From 10840f034e2329150ce0e683e636ea13b268d333 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 13 Nov 2008 15:38:02 +0900 Subject: sh: Don't factor in PAGE_OFFSET for valid_phys_addr_range() check. Signed-off-by: Paul Mundt --- arch/sh/mm/mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c index 1f3cc3d92d3d..8837d511710a 100644 --- a/arch/sh/mm/mmap.c +++ b/arch/sh/mm/mmap.c @@ -17,7 +17,7 @@ */ int valid_phys_addr_range(unsigned long addr, size_t count) { - if (addr < (PAGE_OFFSET + (PFN_START << PAGE_SHIFT))) + if (addr < __MEMORY_START) return 0; if (addr + count > __pa(high_memory)) return 0; -- cgit v1.2.3 From 6e093d9dfffc9a02cd54d36904c62f705f09900a Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Wed, 12 Nov 2008 22:59:21 -0800 Subject: ipv6: routing header fixes This patch fixes two bugs: 1. setsockopt() of anything but a Type 2 routing header should return EINVAL instead of EPERM. Noticed by Shan Wei (shanwei@cn.fujitsu.com). 2. setsockopt()/sendmsg() of a Type 2 routing header with invalid length or segments should return EINVAL. These values are statically fixed in RFC 3775, unlike the variable Type 0 was. Signed-off-by: Brian Haley Signed-off-by: David S. Miller --- net/ipv6/datagram.c | 5 +++++ net/ipv6/ipv6_sockglue.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 410046a8cc91..e44deb8d4df2 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -661,6 +661,11 @@ int datagram_send_ctl(struct net *net, switch (rthdr->type) { #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) case IPV6_SRCRT_TYPE_2: + if (rthdr->hdrlen != 2 || + rthdr->segments_left != 1) { + err = -EINVAL; + goto exit_f; + } break; #endif default: diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 4e5eac301f91..2aa294be0c79 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -366,11 +366,16 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, } /* routing header option needs extra check */ + retv = -EINVAL; if (optname == IPV6_RTHDR && opt && opt->srcrt) { struct ipv6_rt_hdr *rthdr = opt->srcrt; switch (rthdr->type) { #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) case IPV6_SRCRT_TYPE_2: + if (rthdr->hdrlen != 2 || + rthdr->segments_left != 1) + goto sticky_done; + break; #endif default: -- cgit v1.2.3 From 9c0188acf6dd6990bac9cd906cd554a1476c6d12 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 12 Nov 2008 23:23:51 -0800 Subject: net: shy netns_ok check Failure to pass netns_ok check is SILENT, except some MIB counter is incremented somewhere. And adding "netns_ok = 1" (after long head-scratching session) is usually the last step in making some protocol netns-ready... Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/ipv4/ip_input.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c index 861978a4f1a8..cfb38ac9d698 100644 --- a/net/ipv4/ip_input.c +++ b/net/ipv4/ip_input.c @@ -209,9 +209,17 @@ static int ip_local_deliver_finish(struct sk_buff *skb) hash = protocol & (MAX_INET_PROTOS - 1); ipprot = rcu_dereference(inet_protos[hash]); - if (ipprot != NULL && (net == &init_net || ipprot->netns_ok)) { + if (ipprot != NULL) { int ret; + if (!net_eq(net, &init_net) && !ipprot->netns_ok) { + if (net_ratelimit()) + printk("%s: proto %d isn't netns-ready\n", + __func__, protocol); + kfree_skb(skb); + goto out; + } + if (!ipprot->no_policy) { if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) { kfree_skb(skb); -- cgit v1.2.3 From 1fa989e80a9a104bf3b81842a5f4c1867d7aa9c4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Nov 2008 11:05:17 +0000 Subject: 9p: restrict RDMA usage Make 9p's RDMA option depend on INET since it uses Infiniband rdma_* functions and that code depends on INET. Otherwise 9p can try to use symbols which don't exist. ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined! I used an if/endif block so that the menu items would remain presented together. Also correct an article adjective. Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- net/9p/Kconfig | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/9p/Kconfig b/net/9p/Kconfig index c42c0c400bf9..0663f99e977a 100644 --- a/net/9p/Kconfig +++ b/net/9p/Kconfig @@ -13,22 +13,24 @@ menuconfig NET_9P If unsure, say N. +if NET_9P + config NET_9P_VIRTIO - depends on NET_9P && EXPERIMENTAL && VIRTIO + depends on EXPERIMENTAL && VIRTIO tristate "9P Virtio Transport (Experimental)" help This builds support for a transports between guest partitions and a host partition. config NET_9P_RDMA - depends on NET_9P && INFINIBAND && EXPERIMENTAL + depends on INET && INFINIBAND && EXPERIMENTAL tristate "9P RDMA Transport (Experimental)" help - This builds support for a RDMA transport. + This builds support for an RDMA transport. config NET_9P_DEBUG bool "Debug information" - depends on NET_9P help Say Y if you want the 9P subsystem to log debug information. +endif -- cgit v1.2.3 From 5acdc1fa2d9614ecd301f3d27f19bfeabe811ade Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Wed, 12 Nov 2008 23:48:40 -0800 Subject: sparc: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers Signed-off-by: David S. Miller --- arch/sparc/kernel/of_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c index 0837bd52e28f..0a83bd737654 100644 --- a/arch/sparc/kernel/of_device.c +++ b/arch/sparc/kernel/of_device.c @@ -563,9 +563,9 @@ build_resources: op->dev.parent = parent; op->dev.bus = &of_platform_bus_type; if (!parent) - strcpy(op->dev.bus_id, "root"); + dev_set_name(&op->dev, "root"); else - sprintf(op->dev.bus_id, "%08x", dp->node); + dev_set_name(&op->dev, "%08x", dp->node); if (of_device_register(op)) { printk("%s: Could not register of device.\n", -- cgit v1.2.3 From e64ed0225bd82d4c108c9f78f46070cfade14fac Mon Sep 17 00:00:00 2001 From: Robert Reif Date: Wed, 12 Nov 2008 23:51:54 -0800 Subject: sparc: Fix tty compile warnings. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes tty compile warnings as sugested by Alan Cox: CC drivers/char/n_tty.o drivers/char/n_tty.c: In function ‘normal_poll’: drivers/char/n_tty.c:1555: warning: array subscript is above array bounds drivers/char/n_tty.c:1564: warning: array subscript is above array bounds drivers/char/n_tty.c: In function ‘read_chan’: drivers/char/n_tty.c:1269: warning: array subscript is above array bounds CC drivers/char/tty_ioctl.o drivers/char/tty_ioctl.c: In function ‘set_termios’: drivers/char/tty_ioctl.c:533: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:537: warning: array subscript is above array bounds drivers/char/tty_ioctl.c: In function ‘tty_mode_ioctl’: drivers/char/tty_ioctl.c:662: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:892: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:896: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:577: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:928: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:934: warning: array subscript is above array bounds Signed-off-by: Robert Reif Signed-off-by: David S. Miller --- arch/sparc/include/asm/termbits.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/sparc/include/asm/termbits.h b/arch/sparc/include/asm/termbits.h index d6ca3e2754f5..d72dfed1f9d7 100644 --- a/arch/sparc/include/asm/termbits.h +++ b/arch/sparc/include/asm/termbits.h @@ -29,10 +29,11 @@ struct termios { tcflag_t c_cflag; /* control mode flags */ tcflag_t c_lflag; /* local mode flags */ cc_t c_line; /* line discipline */ +#ifndef __KERNEL__ cc_t c_cc[NCCS]; /* control characters */ -#ifdef __KERNEL__ +#else + cc_t c_cc[NCCS+2]; /* kernel needs 2 more to hold vmin/vtime */ #define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t)) - cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ #endif }; @@ -42,8 +43,7 @@ struct termios2 { tcflag_t c_cflag; /* control mode flags */ tcflag_t c_lflag; /* local mode flags */ cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t _x_cc[2]; /* padding to match ktermios */ + cc_t c_cc[NCCS+2]; /* control characters */ speed_t c_ispeed; /* input speed */ speed_t c_ospeed; /* output speed */ }; @@ -54,8 +54,7 @@ struct ktermios { tcflag_t c_cflag; /* control mode flags */ tcflag_t c_lflag; /* local mode flags */ cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ + cc_t c_cc[NCCS+2]; /* control characters */ speed_t c_ispeed; /* input speed */ speed_t c_ospeed; /* output speed */ }; -- cgit v1.2.3 From 2fe401e38602e853e01376cdb670b0bc4d526a6d Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Wed, 12 Nov 2008 16:23:55 -0800 Subject: sched: correct sched-rt-group.txt pathname in init/Kconfig init/Kconfig directs the user to Documentation/sched-rt-group.txt, but the file is actually in Documentation/scheduler/sched-rt-group.txt. This patch corrects the pathname mentioned in init/Kconfig. Signed-off-by: Adrian Knoth Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- init/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/Kconfig b/init/Kconfig index 86b00c53fade..2f850d800d94 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -354,7 +354,7 @@ config RT_GROUP_SCHED setting below. If enabled, it will also make it impossible to schedule realtime tasks for non-root users until you allocate realtime bandwidth for them. - See Documentation/sched-rt-group.txt for more information. + See Documentation/scheduler/sched-rt-group.txt for more information. choice depends on GROUP_SCHED -- cgit v1.2.3 From 2cd0ebc83d771220eeddec91fd6d4cfefc2cc46e Mon Sep 17 00:00:00 2001 From: Francesco VIRLINZI Date: Wed, 15 Oct 2008 11:58:24 +0200 Subject: sh: Fixed the TMU0 reload value on resume This patch fixes the TMU0 interrupt frequency on suspend/resume. During the resume the kernel reprograms the TMU0.ClockEvent mode but if the mode is periodic than the TMU0.TCOR is updated with a random wrong value without taking care latest valid saved value. There was no problem with No_HZ system where TMU0.TCOR isn't used. Signed-off-by: Francesco M. Virlinzi Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/kernel/timers/timer-tmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index aaaf90d06b85..3c61ddd4d43e 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -120,7 +120,7 @@ static void tmu_set_mode(enum clock_event_mode mode, { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - ctrl_outl(ctrl_inl(TMU0_TCNT), TMU0_TCOR); + ctrl_outl(tmu_latest_interval[TMU0], TMU0_TCOR); break; case CLOCK_EVT_MODE_ONESHOT: ctrl_outl(0, TMU0_TCOR); -- cgit v1.2.3 From 5d52013cbb3d39bde9f5a6023193058eeb112e98 Mon Sep 17 00:00:00 2001 From: Stuart MENEFY Date: Fri, 10 Oct 2008 19:49:30 +0100 Subject: sh: __copy_user function can corrupt the stack in case of exception The __copy_user function can corrupt the stack in the case of a non-trivial length of data, and either of the first two move instructions cause an exception. This is because the fixup for these two instructions is mapped to the no_pop case, but these instructions execute after the stack is pushed. This change creates an explicit NO_POP exception mapping macro, and uses it for the two instructions executed in the trivial case where no stack pushes occur. More information at ST Linux bugzilla: https://bugzilla.stlinux.com/show_bug.cgi?id=4824 Signed-off-by: Dylan Reid Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/lib/copy_page.S | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S index 5d12e657be34..43de7e8e4e17 100644 --- a/arch/sh/lib/copy_page.S +++ b/arch/sh/lib/copy_page.S @@ -80,6 +80,11 @@ ENTRY(copy_page) .section __ex_table, "a"; \ .long 9999b, 6000f ; \ .previous +#define EX_NO_POP(...) \ + 9999: __VA_ARGS__ ; \ + .section __ex_table, "a"; \ + .long 9999b, 6005f ; \ + .previous ENTRY(__copy_user) ! Check if small number of bytes mov #11,r0 @@ -139,9 +144,9 @@ EX( mov.b r1,@r4 ) bt 1f 2: -EX( mov.b @r5+,r0 ) +EX_NO_POP( mov.b @r5+,r0 ) dt r6 -EX( mov.b r0,@r4 ) +EX_NO_POP( mov.b r0,@r4 ) bf/s 2b add #1,r4 @@ -150,7 +155,7 @@ EX( mov.b r0,@r4 ) # Exception handler: .section .fixup, "ax" -6000: +6005: mov.l 8000f,r1 mov r3,r0 jmp @r1 -- cgit v1.2.3 From 272966c070237c8cb540fe67e06df51bc6ea9cc2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 13 Nov 2008 17:46:06 +0900 Subject: serial: sh-sci: Reorder the SCxTDR write after the TDxE clear. Under qemu there is a race between the TDxE read-and-clear and the SCxTDR write. While on hardware it can be gauranteed that the read-and-clear will happen prior to the character being written out, no such assumption can be made under emulation. As this path happens with IRQs off and the hardware itself doesn't care about the ordering, move the SCxTDR write until after the read-and-clear. Signed-off-by: Vladimir Prus Signed-off-by: Paul Mundt --- arch/sh/kernel/early_printk.c | 2 +- drivers/serial/sh-sci.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 98a29a782301..a952dcf9999d 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -85,9 +85,9 @@ static void scif_sercon_putc(int c) while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE)) ; - sci_out(&scif_port, SCxTDR, c); sci_in(&scif_port, SCxSR); sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40)); + sci_out(&scif_port, SCxTDR, c); while ((sci_in(&scif_port, SCxSR) & 0x40) == 0) ; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 518c0321e4d3..165fc010978c 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -144,9 +144,9 @@ static void put_char(struct uart_port *port, char c) status = sci_in(port, SCxSR); } while (!(status & SCxSR_TDxE(port))); - sci_out(port, SCxTDR, c); sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + sci_out(port, SCxTDR, c); spin_unlock_irqrestore(&port->lock, flags); } -- cgit v1.2.3 From 7d672cd7506165818aacf97fdc448cffc72bde37 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 31 Oct 2008 00:07:23 +0100 Subject: HID: fix locking in hidraw_open() As open needs to sleep hidraw was wrong to call it with a spinlock held. Furthermore, open can of course fail which needs to be handled. Signed-off-by: Oliver Neukum Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 894d52e05bf9..7685ae6808c4 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -38,7 +38,7 @@ static int hidraw_major; static struct cdev hidraw_cdev; static struct class *hidraw_class; static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES]; -static DEFINE_SPINLOCK(minors_lock); +static DEFINE_MUTEX(minors_lock); static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { @@ -159,13 +159,13 @@ static int hidraw_open(struct inode *inode, struct file *file) struct hidraw_list *list; int err = 0; - lock_kernel(); if (!(list = kzalloc(sizeof(struct hidraw_list), GFP_KERNEL))) { err = -ENOMEM; goto out; } - spin_lock(&minors_lock); + lock_kernel(); + mutex_lock(&minors_lock); if (!hidraw_table[minor]) { printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n", minor); @@ -180,13 +180,16 @@ static int hidraw_open(struct inode *inode, struct file *file) file->private_data = list; dev = hidraw_table[minor]; - if (!dev->open++) - dev->hid->ll_driver->open(dev->hid); + if (!dev->open++) { + err = dev->hid->ll_driver->open(dev->hid); + if (err < 0) + dev->open--; + } out_unlock: - spin_unlock(&minors_lock); -out: + mutex_unlock(&minors_lock); unlock_kernel(); +out: return err; } @@ -310,7 +313,7 @@ int hidraw_connect(struct hid_device *hid) result = -EINVAL; - spin_lock(&minors_lock); + mutex_lock(&minors_lock); for (minor = 0; minor < HIDRAW_MAX_DEVICES; minor++) { if (hidraw_table[minor]) @@ -320,9 +323,8 @@ int hidraw_connect(struct hid_device *hid) break; } - spin_unlock(&minors_lock); - if (result) { + mutex_unlock(&minors_lock); kfree(dev); goto out; } @@ -331,14 +333,14 @@ int hidraw_connect(struct hid_device *hid) NULL, "%s%d", "hidraw", minor); if (IS_ERR(dev->dev)) { - spin_lock(&minors_lock); hidraw_table[minor] = NULL; - spin_unlock(&minors_lock); + mutex_unlock(&minors_lock); result = PTR_ERR(dev->dev); kfree(dev); goto out; } + mutex_unlock(&minors_lock); init_waitqueue_head(&dev->wait); INIT_LIST_HEAD(&dev->list); @@ -360,9 +362,9 @@ void hidraw_disconnect(struct hid_device *hid) hidraw->exist = 0; - spin_lock(&minors_lock); + mutex_lock(&minors_lock); hidraw_table[hidraw->minor] = NULL; - spin_unlock(&minors_lock); + mutex_unlock(&minors_lock); device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); -- cgit v1.2.3 From a96d6ef34751093797c3a6c6080733dd7af23d35 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 4 Nov 2008 20:03:45 +0100 Subject: HID: support for new unibody macbooks The unibody MacBook 5 and MacBook Pro 5 come with a new version of the bcm5974 trackpad. This patch adds the USB device ids and all the appropriate quirks, including hid_blacklist. Signed-off-by: Henrik Rydberg Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 6 ++++++ drivers/hid/hid-core.c | 6 ++++++ drivers/hid/hid-ids.h | 3 +++ 3 files changed, 15 insertions(+) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index c6ab4ba60c52..ce3c39938f9f 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -418,6 +418,12 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index d3671b4049c0..4f0b92edb4df 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1250,6 +1250,9 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, @@ -1573,6 +1576,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { } diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index f05bcbbbb0d5..d70075dd3d81 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -82,6 +82,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241 -- cgit v1.2.3 From 437184ae8bd1ef923a40b009e37801deae66ad55 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 4 Nov 2008 13:31:38 +0100 Subject: HID: map macbook keys for "Expose" and "Dashboard" On macbooks there are specific keys for the user-space functions Expose and Dashboard, which currently has no counterpart in input.h. This patch adds KEY_SCALE and KEY_DASHBOARD, and maps the keyboard accordingly. Acked-by: Dmitry Torokhov Signed-off-by: Henrik Rydberg Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 5 +++-- include/linux/input.h | 2 ++ 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index ce3c39938f9f..9b97795e45ad 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -55,10 +55,11 @@ struct apple_key_translation { static struct apple_key_translation apple_fn_keys[] = { { KEY_BACKSPACE, KEY_DELETE }, + { KEY_ENTER, KEY_INSERT }, { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY }, { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY }, - { KEY_F3, KEY_FN_F5, APPLE_FLAG_FKEY }, /* Exposé */ - { KEY_F4, KEY_FN_F4, APPLE_FLAG_FKEY }, /* Dashboard */ + { KEY_F3, KEY_SCALE, APPLE_FLAG_FKEY }, + { KEY_F4, KEY_DASHBOARD, APPLE_FLAG_FKEY }, { KEY_F5, KEY_KBDILLUMDOWN, APPLE_FLAG_FKEY }, { KEY_F6, KEY_KBDILLUMUP, APPLE_FLAG_FKEY }, { KEY_F7, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY }, diff --git a/include/linux/input.h b/include/linux/input.h index b86fb5581ce6..5341e8251f8c 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -238,6 +238,7 @@ struct input_absinfo { #define KEY_KPEQUAL 117 #define KEY_KPPLUSMINUS 118 #define KEY_PAUSE 119 +#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ #define KEY_KPCOMMA 121 #define KEY_HANGEUL 122 @@ -322,6 +323,7 @@ struct input_absinfo { #define KEY_PAUSECD 201 #define KEY_PROG3 202 #define KEY_PROG4 203 +#define KEY_DASHBOARD 204 /* AL Dashboard */ #define KEY_SUSPEND 205 #define KEY_CLOSE 206 /* AC Close */ #define KEY_PLAY 207 -- cgit v1.2.3 From 43ff3a48c13f3ddc085271c2eea2985d28c8aa08 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 10 Nov 2008 22:51:50 +0100 Subject: HID: use single threaded work queue for hid_compat Use single threaded work queue for hid_compat I doubt HID really needs to scale over multiple CPUs. So only use a single threaded workqueue for HID_COMPAT. This avoids some excessive thread use on systems with a larger number of CPUs. Signed-off-by: Andi Kleen Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 4f0b92edb4df..e158aa83b92f 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1736,7 +1736,7 @@ static int __init hid_init(void) goto err_bus; #ifdef CONFIG_HID_COMPAT - hid_compat_wq = create_workqueue("hid_compat"); + hid_compat_wq = create_singlethread_workqueue("hid_compat"); if (!hid_compat_wq) { hidraw_exit(); goto err; -- cgit v1.2.3 From e3e14de50dff86331b8f0d701e910146c0049bf5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 1 Nov 2008 23:41:46 +0100 Subject: HID: fix start/stop cycle in usbhid driver `stop' left out usbhid->urb* pointers and so the next `start' thought it needs to allocate nothing and used the memory pointers previously pointed to. This led to memory corruption and device malfunction. Also don't forget to clear disconnect flag on start which was left set by the previous `stop'. This fixes echo DEVICE > /sys/bus/hid/drivers/DRIVER/unbind echo DEVICE > /sys/bus/hid/drivers/DRIVER/bind failures. Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 18e5ddd722cd..f0339aefc798 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -781,6 +781,8 @@ static int usbhid_start(struct hid_device *hid) unsigned int n, insize = 0; int ret; + clear_bit(HID_DISCONNECTED, &usbhid->iofl); + usbhid->bufsize = HID_MIN_BUFFER_SIZE; hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize); hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize); @@ -888,6 +890,9 @@ fail: usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbout); usb_free_urb(usbhid->urbctrl); + usbhid->urbin = NULL; + usbhid->urbout = NULL; + usbhid->urbctrl = NULL; hid_free_buffers(dev, hid); mutex_unlock(&usbhid->setup); return ret; @@ -924,6 +929,9 @@ static void usbhid_stop(struct hid_device *hid) usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbctrl); usb_free_urb(usbhid->urbout); + usbhid->urbin = NULL; /* don't mess up next start */ + usbhid->urbctrl = NULL; + usbhid->urbout = NULL; hid_free_buffers(hid_to_usb_dev(hid), hid); mutex_unlock(&usbhid->setup); -- cgit v1.2.3 From c91c21c5a6facddce936d82e5bc0c655d04288aa Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 13 Nov 2008 10:36:11 +0100 Subject: HID: fix kworld fm700 radio hidquirks This patch fixes kworld fm700 usb-radio hidqurks that handled by radio-si470x. Removes it from blacklist entry and places it in ignore entry in hid/hid-core.c The bug went in through the V4L/DVB tree by commit 6a13378a without HID maintainer being involved at all. Signed-off-by: Alexey Klimov Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index e158aa83b92f..4b33d145286c 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1268,7 +1268,6 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, - { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, @@ -1489,6 +1488,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) }, { HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) }, { HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) }, -- cgit v1.2.3 From 62a56582e01b1c5139b235004548e233201df9aa Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 13 Nov 2008 05:44:50 +0300 Subject: HID: fix radio-mr800 hidquirks This patch fixes radio-mr800 hidqurks. Removes it from blacklist entry and places it in ignore entry in hid/hid-core.c Signed-off-by: Alexey Klimov Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 4b33d145286c..147ec591a806 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1255,7 +1255,6 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, - { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, { HID_USB_DEVICE(USB_VENDOR_ID_BRIGHT, USB_DEVICE_ID_BRIGHT_ABNT2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, @@ -1411,6 +1410,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)}, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)}, + { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, -- cgit v1.2.3 From 3ff68a6a106c362a6811d3e51bced58e6fc87de7 Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Thu, 13 Nov 2008 21:37:41 +1100 Subject: genirq: __irq_set_trigger: change pr_warning to pr_debug Commit 0c5d1eb77a8be917b638344a22afe1398236482b (genirq: record trigger type) caused powerpc platforms that had no set_type() function in their struct irq_chip to spew out warnings about "No set_type function for IRQ...". This warning isn't necessarily justified though because the generic powerpc platform code calls set_irq_type() (which in turn calls __irq_set_trigger) with information from the device tree to establish the interrupt mappings, regardless of whether the PIC can actually set a type. A platform's irq_chip might not have a set_type function for a variety of reasons, for example: the platform may have the type essentially hard-coded, or as in the case for Cell interrupts are just messages past around that have no real concept of type, or the platform could even have a virtual PIC as on the PS3. Signed-off-by: Mark Nelson Signed-off-by: Ingo Molnar --- kernel/irq/manage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 435861284e4c..801addda3c43 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -365,7 +365,7 @@ int __irq_set_trigger(struct irq_desc *desc, unsigned int irq, * IRQF_TRIGGER_* but the PIC does not support multiple * flow-types? */ - pr_warning("No set_type function for IRQ %d (%s)\n", irq, + pr_debug("No set_type function for IRQ %d (%s)\n", irq, chip ? (chip->name ? : "unknown") : "unknown"); return 0; } -- cgit v1.2.3 From 4d4e9bb339cfcde7811af10859ba1ce2fe3d46b4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 12 Nov 2008 16:45:04 +0100 Subject: ALSA: hda - Add digital beep playback switch for STAC/IDT codecs The digital beep widget may have no mute control, and always enabling the beep is ofen pretty annoying, especially on laptops. This patch adds a mixer control "PC Beep Playback Switch" when there is no mixer amp mute is found, and controls it on software. Reference: Novell bnc#444572 https://bugzilla.novell.com/show_bug.cgi?id=444572 Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 4 +++ sound/pci/hda/hda_beep.h | 1 + sound/pci/hda/patch_sigmatel.c | 69 ++++++++++++++++++++++++++++++++++++++---- 3 files changed, 68 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 9b77b3e0fa98..b1796ae1e8fb 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -37,6 +37,9 @@ static void snd_hda_generate_beep(struct work_struct *work) container_of(work, struct hda_beep, beep_work); struct hda_codec *codec = beep->codec; + if (!beep->enabled) + return; + /* generate tone */ snd_hda_codec_write_cache(codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, beep->tone); @@ -115,6 +118,7 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) beep->nid = nid; beep->dev = input_dev; beep->codec = codec; + beep->enabled = 1; codec->beep = beep; INIT_WORK(&beep->beep_work, &snd_hda_generate_beep); diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h index de4036e6e710..b9679f081cae 100644 --- a/sound/pci/hda/hda_beep.h +++ b/sound/pci/hda/hda_beep.h @@ -31,6 +31,7 @@ struct hda_beep { char phys[32]; int tone; int nid; + int enabled; struct work_struct beep_work; /* scheduled task for beep event */ }; diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 4300a679cd86..1633ef2c654a 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2587,8 +2587,10 @@ static struct snd_kcontrol_new stac92xx_control_templates[] = { }; /* add dynamic controls */ -static int stac92xx_add_control_idx(struct sigmatel_spec *spec, int type, - int idx, const char *name, unsigned long val) +static int stac92xx_add_control_temp(struct sigmatel_spec *spec, + struct snd_kcontrol_new *ktemp, + int idx, const char *name, + unsigned long val) { struct snd_kcontrol_new *knew; @@ -2607,20 +2609,29 @@ static int stac92xx_add_control_idx(struct sigmatel_spec *spec, int type, } knew = &spec->kctl_alloc[spec->num_kctl_used]; - *knew = stac92xx_control_templates[type]; + *knew = *ktemp; knew->index = idx; knew->name = kstrdup(name, GFP_KERNEL); - if (! knew->name) + if (!knew->name) return -ENOMEM; knew->private_value = val; spec->num_kctl_used++; return 0; } +static inline int stac92xx_add_control_idx(struct sigmatel_spec *spec, + int type, int idx, const char *name, + unsigned long val) +{ + return stac92xx_add_control_temp(spec, + &stac92xx_control_templates[type], + idx, name, val); +} + /* add dynamic controls */ -static int stac92xx_add_control(struct sigmatel_spec *spec, int type, - const char *name, unsigned long val) +static inline int stac92xx_add_control(struct sigmatel_spec *spec, int type, + const char *name, unsigned long val) { return stac92xx_add_control_idx(spec, type, 0, name, val); } @@ -3062,6 +3073,43 @@ static int stac92xx_auto_create_beep_ctls(struct hda_codec *codec, return 0; } +#ifdef CONFIG_SND_HDA_INPUT_BEEP +#define stac92xx_dig_beep_switch_info snd_ctl_boolean_mono_info + +static int stac92xx_dig_beep_switch_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + ucontrol->value.integer.value[0] = codec->beep->enabled; + return 0; +} + +static int stac92xx_dig_beep_switch_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + int enabled = !!ucontrol->value.integer.value[0]; + if (codec->beep->enabled != enabled) { + codec->beep->enabled = enabled; + return 1; + } + return 0; +} + +static struct snd_kcontrol_new stac92xx_dig_beep_ctrl = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = stac92xx_dig_beep_switch_info, + .get = stac92xx_dig_beep_switch_get, + .put = stac92xx_dig_beep_switch_put, +}; + +static int stac92xx_beep_switch_ctl(struct hda_codec *codec) +{ + return stac92xx_add_control_temp(codec->spec, &stac92xx_dig_beep_ctrl, + 0, "PC Beep Playback Switch", 0); +} +#endif + static int stac92xx_auto_create_mux_input_ctls(struct hda_codec *codec) { struct sigmatel_spec *spec = codec->spec; @@ -3368,6 +3416,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out #ifdef CONFIG_SND_HDA_INPUT_BEEP if (spec->digbeep_nid > 0) { hda_nid_t nid = spec->digbeep_nid; + unsigned int caps; err = stac92xx_auto_create_beep_ctls(codec, nid); if (err < 0) @@ -3375,6 +3424,14 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out err = snd_hda_attach_beep_device(codec, nid); if (err < 0) return err; + /* if no beep switch is available, make its own one */ + caps = query_amp_caps(codec, nid, HDA_OUTPUT); + if (codec->beep && + !((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT)) { + err = stac92xx_beep_switch_ctl(codec); + if (err < 0) + return err; + } } #endif -- cgit v1.2.3 From 6a12afb5640217454cad21e8cf9a74b038fa3717 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 13 Nov 2008 13:08:56 +0100 Subject: ALSA: hda - Missing NULL check in hda_beep.c Added a NULL check of input_allocate_device() in hda_beep.c. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index b1796ae1e8fb..3ecd7e797dee 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -88,6 +88,10 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) snprintf(beep->phys, sizeof(beep->phys), "card%d/codec#%d/beep0", codec->bus->card->number, codec->addr); input_dev = input_allocate_device(); + if (!input_dev) { + kfree(beep); + return -ENOMEM; + } /* setup digital beep device */ input_dev->name = "HDA Digital PCBeep"; -- cgit v1.2.3 From ee51a1de7e3837577412be269e0100038068e691 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 13 Nov 2008 14:58:31 +0100 Subject: tracing: fix mmiotrace resizing crash Pekka reported a crash when resizing the mmiotrace tracer (if only mmiotrace is enabled). This happens because in that case we do not allocate the max buffer, but we try to use it. Make ring_buffer_resize() idempotent against NULL buffers. Reported-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 231db209fa82..036456cbb4f7 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -538,6 +538,12 @@ int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size) LIST_HEAD(pages); int i, cpu; + /* + * Always succeed at resizing a non-existent buffer: + */ + if (!buffer) + return size; + size = DIV_ROUND_UP(size, BUF_PAGE_SIZE); size *= BUF_PAGE_SIZE; buffer_size = buffer->pages * BUF_PAGE_SIZE; -- cgit v1.2.3 From 9fa767928fe738aba8e99dae511e91f02fe20b28 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 14:33:51 +0000 Subject: [ARM] dma-mapping: fix compiler warning arch/arm/mm/dma-mapping.c: In function `dma_sync_sg_for_cpu': arch/arm/mm/dma-mapping.c:588: warning: statement with no effect Signed-off-by: Russell King --- arch/arm/include/asm/dma-mapping.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 1cb8602dd9d5..4ed149cbb32a 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -256,8 +256,17 @@ int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long, int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction); #else -#define dmabounce_sync_for_cpu(dev,dma,off,sz,dir) (1) -#define dmabounce_sync_for_device(dev,dma,off,sz,dir) (1) +static inline int dmabounce_sync_for_cpu(struct device *d, dma_addr_t addr, + unsigned long offset, size_t size, enum dma_data_direction dir) +{ + return 1; +} + +static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr, + unsigned long offset, size_t size, enum dma_data_direction dir) +{ + return 1; +} /** -- cgit v1.2.3 From 1e8b0416ca387d754410a4e5d6b92ad6e2fb00eb Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 14:43:03 +0000 Subject: [ARM] integrator,realview,versatile: remove FLASH_* and EPROM_* constants FLASH_* and EPROM_* constants are unused, and clash with drivers: drivers/atm/ambassador.h:257:1: warning: "FLASH_BASE" redefined drivers/atm/ambassador.h:258:1: warning: "FLASH_SIZE" redefined drivers/atm/iphase.h:332:1: warning: "EPROM_SIZE" redefined so remove them. Signed-off-by: Russell King --- arch/arm/mach-integrator/include/mach/platform.h | 19 +------------------ arch/arm/mach-realview/include/mach/platform.h | 19 +------------------ arch/arm/mach-versatile/include/mach/platform.h | 18 +----------------- 3 files changed, 3 insertions(+), 53 deletions(-) diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index 028b87839c0f..e00a2624f269 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -407,28 +407,11 @@ */ #define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE -/* - * Application Flash - * - */ -#define FLASH_BASE INTEGRATOR_FLASH_BASE -#define FLASH_SIZE INTEGRATOR_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE INTEGRATOR_BOOT_ROM_HI -#define EPROM_SIZE INTEGRATOR_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - /* * Clean base - dummy * */ -#define CLEAN_BASE EPROM_BASE +#define CLEAN_BASE INTEGRATOR_BOOT_ROM_HI /* * Timer definitions diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index 4034b54950c2..793a3a332712 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -238,28 +238,11 @@ #define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ #define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ -/* - * Application Flash - * - */ -#define FLASH_BASE REALVIEW_FLASH_BASE -#define FLASH_SIZE REALVIEW_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE REALVIEW_BOOT_ROM_HI -#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - /* * Clean base - dummy * */ -#define CLEAN_BASE EPROM_BASE +#define CLEAN_BASE REALVIEW_BOOT_ROM_HI /* * System controller bit assignment diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h index 27cbe6a3f220..f91ba930ca8a 100644 --- a/arch/arm/mach-versatile/include/mach/platform.h +++ b/arch/arm/mach-versatile/include/mach/platform.h @@ -436,28 +436,12 @@ #define SIC_INTMASK_PCI1 (1 << SIC_INT_PCI1) #define SIC_INTMASK_PCI2 (1 << SIC_INT_PCI2) #define SIC_INTMASK_PCI3 (1 << SIC_INT_PCI3) -/* - * Application Flash - * - */ -#define FLASH_BASE VERSATILE_FLASH_BASE -#define FLASH_SIZE VERSATILE_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE VERSATILE_BOOT_ROM_HI -#define EPROM_SIZE VERSATILE_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) /* * Clean base - dummy * */ -#define CLEAN_BASE EPROM_BASE +#define CLEAN_BASE VERSATILE_BOOT_ROM_HI /* * System controller bit assignment -- cgit v1.2.3 From d9a682a592ff5905d328c648fd30ee7fa12ce8ab Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 14:53:08 +0000 Subject: [ARM] cdb89712,clps7500,h720x: avoid namespace clash for FLASH_* constants Signed-off-by: Russell King --- arch/arm/mach-clps711x/include/mach/hardware.h | 4 ---- arch/arm/mach-clps7500/core.c | 6 +++--- arch/arm/mach-clps7500/include/mach/hardware.h | 6 +++--- arch/arm/mach-h720x/include/mach/boards.h | 6 +++--- drivers/mtd/maps/cdb89712.c | 4 +++- drivers/mtd/maps/h720x-flash.c | 6 +++--- 6 files changed, 15 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 4c3e101b96c9..7cc675c93e20 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -95,10 +95,6 @@ #include /* dynamic ioremap() areas */ -#define FLASH_START 0x00000000 -#define FLASH_SIZE 0x800000 -#define FLASH_WIDTH 4 - #define SRAM_START 0x60000000 #define SRAM_SIZE 0xc000 #define SRAM_WIDTH 4 diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index c3a33b8a5aac..7e247c04d41c 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -275,9 +275,9 @@ static struct map_desc cl7500_io_desc[] __initdata = { .length = ISA_SIZE, .type = MT_DEVICE }, { /* Flash */ - .virtual = FLASH_BASE, - .pfn = __phys_to_pfn(FLASH_START), - .length = FLASH_SIZE, + .virtual = CLPS7500_FLASH_BASE, + .pfn = __phys_to_pfn(CLPS7500_FLASH_START), + .length = CLPS7500_FLASH_SIZE, .type = MT_DEVICE }, { /* LED */ .virtual = LED_BASE, diff --git a/arch/arm/mach-clps7500/include/mach/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h index d66578a3371c..a6ad1d44badf 100644 --- a/arch/arm/mach-clps7500/include/mach/hardware.h +++ b/arch/arm/mach-clps7500/include/mach/hardware.h @@ -39,9 +39,9 @@ #define ISA_SIZE 0x00010000 #define ISA_BASE 0xe1000000 -#define FLASH_START 0x01000000 /* XXX */ -#define FLASH_SIZE 0x01000000 -#define FLASH_BASE 0xe2000000 +#define CLPS7500_FLASH_START 0x01000000 /* XXX */ +#define CLPS7500_FLASH_SIZE 0x01000000 +#define CLPS7500_FLASH_BASE 0xe2000000 #define LED_START 0x0302B000 #define LED_SIZE 0x00001000 diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h index 079b279e1242..38b8e0d61fbf 100644 --- a/arch/arm/mach-h720x/include/mach/boards.h +++ b/arch/arm/mach-h720x/include/mach/boards.h @@ -19,9 +19,9 @@ #ifdef CONFIG_ARCH_H7202 /* FLASH */ -#define FLASH_VIRT 0xd0000000 -#define FLASH_PHYS 0x00000000 -#define FLASH_SIZE 0x02000000 +#define H720X_FLASH_VIRT 0xd0000000 +#define H720X_FLASH_PHYS 0x00000000 +#define H720X_FLASH_SIZE 0x02000000 /* onboard LAN controller */ # define ETH0_PHYS 0x08000000 diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c index e5059aa3c724..d7bc4299b19c 100644 --- a/drivers/mtd/maps/cdb89712.c +++ b/drivers/mtd/maps/cdb89712.c @@ -15,7 +15,9 @@ #include - +#define FLASH_START 0x00000000 +#define FLASH_SIZE 0x800000 +#define FLASH_WIDTH 4 static struct mtd_info *flash_mtd; diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c index 35fef655ccc4..3b959fad1c4e 100644 --- a/drivers/mtd/maps/h720x-flash.c +++ b/drivers/mtd/maps/h720x-flash.c @@ -24,8 +24,8 @@ static struct mtd_info *mymtd; static struct map_info h720x_map = { .name = "H720X", .bankwidth = 4, - .size = FLASH_SIZE, - .phys = FLASH_PHYS, + .size = H720X_FLASH_SIZE, + .phys = H720X_FLASH_PHYS, }; static struct mtd_partition h720x_partitions[] = { @@ -70,7 +70,7 @@ int __init h720x_mtd_init(void) char *part_type = NULL; - h720x_map.virt = ioremap(FLASH_PHYS, FLASH_SIZE); + h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size); if (!h720x_map.virt) { printk(KERN_ERR "H720x-MTD: ioremap failed\n"); -- cgit v1.2.3 From 8959dabdf2f8f9ce982a2c4cfe6d1652a2fb6320 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 15:02:41 +0000 Subject: [ARM] cdb89712: avoid namespace clashes with SRAM_ and BOOTROM_ constants Signed-off-by: Russell King --- arch/arm/mach-clps711x/include/mach/hardware.h | 18 ------------------ drivers/mtd/maps/cdb89712.c | 11 ++++++++++- 2 files changed, 10 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 7cc675c93e20..b3ebe9e4871f 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -94,16 +94,6 @@ #include #include -/* dynamic ioremap() areas */ -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - - /* static cdb89712_map_io() areas */ #define REGISTER_START 0x80000000 #define REGISTER_SIZE 0x4000 @@ -194,14 +184,6 @@ #define CEIVA_FLASH_SIZE 0x100000 #define CEIVA_FLASH_WIDTH 2 -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - /* * SED1355 LCD controller */ diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c index d7bc4299b19c..8d92d8db9a98 100644 --- a/drivers/mtd/maps/cdb89712.c +++ b/drivers/mtd/maps/cdb89712.c @@ -14,11 +14,20 @@ #include #include - +/* dynamic ioremap() areas */ #define FLASH_START 0x00000000 #define FLASH_SIZE 0x800000 #define FLASH_WIDTH 4 +#define SRAM_START 0x60000000 +#define SRAM_SIZE 0xc000 +#define SRAM_WIDTH 4 + +#define BOOTROM_START 0x70000000 +#define BOOTROM_SIZE 0x80 +#define BOOTROM_WIDTH 4 + + static struct mtd_info *flash_mtd; struct map_info cdb89712_flash_map = { -- cgit v1.2.3 From 5907630ffc2b2d133de2db18963ee5a6c5af7878 Mon Sep 17 00:00:00 2001 From: Grant Erickson Date: Wed, 29 Oct 2008 11:41:14 +0000 Subject: powerpc/40x: Limit allocable DRAM during early mapping If the size of DRAM is not an exact power of two, we may not have covered DRAM in its entirety with large 16 and 4 MiB pages. If that is the case, we can get non-recoverable page faults when doing the final PTE mappings for the non-large page PTEs. Consequently, we restrict the top end of DRAM currently allocable by updating '__initial_memory_limit_addr' so that calls to the LMB to allocate PTEs for "tail" coverage with normal-sized pages (or other reasons) do not attempt to allocate outside the allowed range. Signed-off-by: Grant Erickson Signed-off-by: Josh Boyer --- arch/powerpc/mm/40x_mmu.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index cecbbc76f624..29954dc28942 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -93,7 +93,7 @@ void __init MMU_init_hw(void) unsigned long __init mmu_mapin_ram(void) { - unsigned long v, s; + unsigned long v, s, mapped; phys_addr_t p; v = KERNELBASE; @@ -130,5 +130,17 @@ unsigned long __init mmu_mapin_ram(void) s -= LARGE_PAGE_SIZE_4M; } - return total_lowmem - s; + mapped = total_lowmem - s; + + /* If the size of RAM is not an exact power of two, we may not + * have covered RAM in its entirety with 16 and 4 MiB + * pages. Consequently, restrict the top end of RAM currently + * allocable so that calls to the LMB to allocate PTEs for "tail" + * coverage with normal-sized pages (or other reasons) do not + * attempt to allocate outside the allowed range. + */ + + __initial_memory_limit_addr = memstart_addr + mapped; + + return mapped; } -- cgit v1.2.3 From 6612d9b0b8208c2ade3a16b8302a271ec81d45f6 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 11 Nov 2008 16:02:43 +0000 Subject: powerpc/44x: Fix 460EX/460GT machine check handling Those cores use the 440A type machine check (ie, they have MCSRR0/MCSRR1). They thus need to call the appropriate fixup function to hook the right variant of the exception. Without this, all machine checks become fatal due to loss of context when entering the exception handler. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Josh Boyer --- arch/powerpc/kernel/cpu_setup_44x.S | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S index 80cac984d85d..31c18b52affb 100644 --- a/arch/powerpc/kernel/cpu_setup_44x.S +++ b/arch/powerpc/kernel/cpu_setup_44x.S @@ -34,7 +34,12 @@ _GLOBAL(__setup_cpu_440grx) blr _GLOBAL(__setup_cpu_460ex) _GLOBAL(__setup_cpu_460gt) - b __init_fpu_44x + mflr r4 + bl __init_fpu_44x + bl __fixup_440A_mcheck + mtlr r4 + blr + _GLOBAL(__setup_cpu_440gx) _GLOBAL(__setup_cpu_440spe) b __fixup_440A_mcheck -- cgit v1.2.3 From 02f5621042e3f7e2fb6c741cbe5ee7c1f3caf354 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Wed, 5 Nov 2008 22:18:19 +0000 Subject: Kconfig: SLUB is the default slab allocator In 2007, a0acd820807680d2ccc4ef3448387fcdbf152c73 changed the default slab allocator to SLUB, but the SLAB help text still says SLAB is the default. This change fixes that. Signed-off-by: Simon Arlott Signed-off-by: Pekka Enberg --- init/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index 86b00c53fade..226da2733c1e 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -771,8 +771,7 @@ config SLAB help The regular slab allocator that is established and known to work well in all environments. It organizes cache hot objects in - per cpu and per node queues. SLAB is the default choice for - a slab allocator. + per cpu and per node queues. config SLUB bool "SLUB (Unqueued Allocator)" @@ -781,7 +780,8 @@ config SLUB instead of managing queues of cached objects (SLAB approach). Per cpu caching is realized using slabs of objects instead of queues of objects. SLUB can use memory efficiently - and has enhanced diagnostics. + and has enhanced diagnostics. SLUB is the default choice for + a slab allocator. config SLOB depends on EMBEDDED -- cgit v1.2.3 From d7de4c1dc3a2faca0bf05d9e342f885cb2696766 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 13 Nov 2008 20:40:12 +0200 Subject: slab: document SLAB_DESTROY_BY_RCU Explain this SLAB_DESTROY_BY_RCU thing... [hugh@veritas.com: add a pointer to comment in mm/slab.c] Signed-off-by: Peter Zijlstra Acked-by: Jens Axboe Acked-by: Paul E. McKenney Acked-by: Christoph Lameter Signed-off-by: Hugh Dickins Signed-off-by: Pekka Enberg --- include/linux/slab.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/include/linux/slab.h b/include/linux/slab.h index ba965c84ae06..000da12b5cf0 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -23,6 +23,34 @@ #define SLAB_CACHE_DMA 0x00004000UL /* Use GFP_DMA memory */ #define SLAB_STORE_USER 0x00010000UL /* DEBUG: Store the last owner for bug hunting */ #define SLAB_PANIC 0x00040000UL /* Panic if kmem_cache_create() fails */ +/* + * SLAB_DESTROY_BY_RCU - **WARNING** READ THIS! + * + * This delays freeing the SLAB page by a grace period, it does _NOT_ + * delay object freeing. This means that if you do kmem_cache_free() + * that memory location is free to be reused at any time. Thus it may + * be possible to see another object there in the same RCU grace period. + * + * This feature only ensures the memory location backing the object + * stays valid, the trick to using this is relying on an independent + * object validation pass. Something like: + * + * rcu_read_lock() + * again: + * obj = lockless_lookup(key); + * if (obj) { + * if (!try_get_ref(obj)) // might fail for free objects + * goto again; + * + * if (obj->key != key) { // not the object we expected + * put_ref(obj); + * goto again; + * } + * } + * rcu_read_unlock(); + * + * See also the comment on struct slab_rcu in mm/slab.c. + */ #define SLAB_DESTROY_BY_RCU 0x00080000UL /* Defer freeing slabs to RCU */ #define SLAB_MEM_SPREAD 0x00100000UL /* Spread some memory over cpuset */ #define SLAB_TRACE 0x00200000UL /* Trace allocations and frees */ -- cgit v1.2.3 From 278afcbf4fe964230eba67f8fb8235e8b7e63ffb Mon Sep 17 00:00:00 2001 From: David Teigland Date: Thu, 13 Nov 2008 13:22:34 -0600 Subject: dlm: fix shutdown cleanup Fixes a regression from commit 0f8e0d9a317406612700426fad3efab0b7bbc467, "dlm: allow multiple lockspace creates". An extraneous 'else' slipped into a code fragment being moved from release_lockspace() to dlm_release_lockspace(). The result of the unwanted 'else' is that dlm threads and structures are not stopped and cleaned up when the final dlm lockspace is removed. Trying to create a new lockspace again afterward will fail with "kmem_cache_create: duplicate cache dlm_conn" because the cache was not previously destroyed. Signed-off-by: David Teigland --- fs/dlm/lockspace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index d910501de6d2..8d86b7960f0d 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -812,7 +812,7 @@ int dlm_release_lockspace(void *lockspace, int force) error = release_lockspace(ls, force); if (!error) ls_count--; - else if (!ls_count) + if (!ls_count) threads_stop(); mutex_unlock(&ls_lock); -- cgit v1.2.3 From 906bf113beb07a76b665c3863aa864acdc8f9950 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 13 Nov 2008 18:55:54 +0100 Subject: fix cpumask build breakage on parisc Commit 2d3854a37e8b767a51aba38ed6d22817b0631e33 ("cpumask: introduce new API, without changing anything") introduced a build breakage on parisc. This trivial patch fixes it. Signed-off-by: Helge Deller Cc: Rusty Russell Cc: Andrew Morton Cc: Kyle Mc Martin Signed-off-by: Linus Torvalds --- arch/parisc/include/asm/smp.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/parisc/include/asm/smp.h b/arch/parisc/include/asm/smp.h index 398cdbaf4e54..409e698f4361 100644 --- a/arch/parisc/include/asm/smp.h +++ b/arch/parisc/include/asm/smp.h @@ -44,8 +44,6 @@ extern void arch_send_call_function_ipi(cpumask_t mask); #define PROC_CHANGE_PENALTY 15 /* Schedule penalty */ -extern unsigned long cpu_present_mask; - #define raw_smp_processor_id() (current_thread_info()->cpu) #else /* CONFIG_SMP */ -- cgit v1.2.3 From 3b7952109361c684caf0c50474da8662ecc81019 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 13 Nov 2008 19:45:32 +0000 Subject: [CIFS] Fix cifs reconnection flags In preparation for Jeff's big umount/mount fixes to remove the possibility of various races in cifs mount and linked list handling of sessions, sockets and tree connections, this patch cleans up some repetitive code in cifs_mount, and addresses a problem with ses->status and tcon->tidStatus in which we were overloading the "need_reconnect" state with other status in that field. So the "need_reconnect" flag has been broken out from those two state fields (need reconnect was not mutually exclusive from some of the other possible tid and ses states). In addition, a few exit cases in cifs_mount were cleaned up, and a problem with a tcon flag (for lease support) was not being set consistently for the 2nd mount of the same share CC: Jeff Layton CC: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 2 +- fs/cifs/cifsglob.h | 5 + fs/cifs/cifssmb.c | 40 ++++---- fs/cifs/connect.c | 262 ++++++++++++++++++++++++++--------------------------- fs/cifs/file.c | 2 +- 5 files changed, 160 insertions(+), 151 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index ac5915d61dca..903bbd6449d1 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1013,7 +1013,7 @@ static int cifs_oplock_thread(void *dummyarg) not bother sending an oplock release if session to server still is disconnected since oplock already released by the server in that case */ - if (pTcon->tidStatus != CifsNeedReconnect) { + if (!pTcon->need_reconnect) { rc = CIFSSMBLock(0, pTcon, netfid, 0 /* len */ , 0 /* offset */, 0, 0, LOCKING_ANDX_OPLOCK_RELEASE, diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 1cb1189f24e0..dc0aa140f1bf 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -122,6 +122,8 @@ struct cifs_cred { */ struct TCP_Server_Info { + struct list_head tcp_ses_list; + struct list_head smb_ses_list; /* 15 character server name + 0x20 16th byte indicating type = srv */ char server_RFC1001_name[SERVER_NAME_LEN_WITH_NULL]; char unicode_server_Name[SERVER_NAME_LEN_WITH_NULL * 2]; @@ -195,6 +197,7 @@ struct cifsUidInfo { */ struct cifsSesInfo { struct list_head cifsSessionList; + struct list_head tcon_list; struct semaphore sesSem; #if 0 struct cifsUidInfo *uidInfo; /* pointer to user info */ @@ -216,6 +219,7 @@ struct cifsSesInfo { char userName[MAX_USERNAME_SIZE + 1]; char *domainName; char *password; + bool need_reconnect:1; /* connection reset, uid now invalid */ }; /* no more than one of the following three session flags may be set */ #define CIFS_SES_NT4 1 @@ -288,6 +292,7 @@ struct cifsTconInfo { bool unix_ext:1; /* if false disable Linux extensions to CIFS protocol for this mount even if server would support */ bool local_lease:1; /* check leases (only) on local system not remote */ + bool need_reconnect:1; /* connection reset, tid now invalid */ /* BB add field for back pointer to sb struct(s)? */ }; diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index d5eac48fc415..7f0651b69573 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -190,10 +190,10 @@ small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, /* need to prevent multiple threads trying to simultaneously reconnect the same SMB session */ down(&tcon->ses->sesSem); - if (tcon->ses->status == CifsNeedReconnect) + if (tcon->ses->need_reconnect) rc = cifs_setup_session(0, tcon->ses, nls_codepage); - if (!rc && (tcon->tidStatus == CifsNeedReconnect)) { + if (!rc && (tcon->need_reconnect)) { mark_open_files_invalid(tcon); rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon, nls_codepage); @@ -295,7 +295,7 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, check for tcp and smb session status done differently for those three - in the calling routine */ if (tcon) { - if (tcon->tidStatus == CifsExiting) { + if (tcon->need_reconnect) { /* only tree disconnect, open, and write, (and ulogoff which does not have tcon) are allowed as we start force umount */ @@ -337,10 +337,10 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, /* need to prevent multiple threads trying to simultaneously reconnect the same SMB session */ down(&tcon->ses->sesSem); - if (tcon->ses->status == CifsNeedReconnect) + if (tcon->ses->need_reconnect) rc = cifs_setup_session(0, tcon->ses, nls_codepage); - if (!rc && (tcon->tidStatus == CifsNeedReconnect)) { + if (!rc && (tcon->need_reconnect)) { mark_open_files_invalid(tcon); rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon, nls_codepage); @@ -759,7 +759,7 @@ CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon) /* No need to return error on this operation if tid invalidated and closed on server already e.g. due to tcp session crashing */ - if (tcon->tidStatus == CifsNeedReconnect) { + if (tcon->need_reconnect) { up(&tcon->tconSem); return 0; } @@ -806,32 +806,36 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) up(&ses->sesSem); return -EBUSY; } + + if (ses->server == NULL) + return -EIO; + + if (ses->need_reconnect) + goto session_already_dead; /* no need to send SMBlogoff if uid + already closed due to reconnect */ rc = small_smb_init(SMB_COM_LOGOFF_ANDX, 2, NULL, (void **)&pSMB); if (rc) { up(&ses->sesSem); return rc; } - if (ses->server) { - pSMB->hdr.Mid = GetNextMid(ses->server); + pSMB->hdr.Mid = GetNextMid(ses->server); - if (ses->server->secMode & + if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) pSMB->hdr.Flags2 |= SMBFLG2_SECURITY_SIGNATURE; - } pSMB->hdr.Uid = ses->Suid; pSMB->AndXCommand = 0xFF; rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0); - if (ses->server) { - atomic_dec(&ses->server->socketUseCount); - if (atomic_read(&ses->server->socketUseCount) == 0) { - spin_lock(&GlobalMid_Lock); - ses->server->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - rc = -ESHUTDOWN; - } +session_already_dead: + atomic_dec(&ses->server->socketUseCount); + if (atomic_read(&ses->server->socketUseCount) == 0) { + spin_lock(&GlobalMid_Lock); + ses->server->tcpStatus = CifsExiting; + spin_unlock(&GlobalMid_Lock); + rc = -ESHUTDOWN; } up(&ses->sesSem); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index c682be8f2984..c1cd1217c990 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -149,7 +149,7 @@ cifs_reconnect(struct TCP_Server_Info *server) ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); if (ses->server) { if (ses->server == server) { - ses->status = CifsNeedReconnect; + ses->need_reconnect = true; ses->ipc_tid = 0; } } @@ -158,7 +158,7 @@ cifs_reconnect(struct TCP_Server_Info *server) list_for_each(tmp, &GlobalTreeConnectionList) { tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); if ((tcon->ses) && (tcon->ses->server == server)) - tcon->tidStatus = CifsNeedReconnect; + tcon->need_reconnect = true; } read_unlock(&GlobalSMBSeslock); /* do not want to be sending data on a socket we are freeing */ @@ -1891,6 +1891,92 @@ kill_cifsd(struct TCP_Server_Info *server) force_sig(SIGKILL, task); } +static void setup_cifs_sb(struct smb_vol *pvolume_info, + struct cifs_sb_info *cifs_sb) +{ + if (pvolume_info->rsize > CIFSMaxBufSize) { + cERROR(1, ("rsize %d too large, using MaxBufSize", + pvolume_info->rsize)); + cifs_sb->rsize = CIFSMaxBufSize; + } else if ((pvolume_info->rsize) && + (pvolume_info->rsize <= CIFSMaxBufSize)) + cifs_sb->rsize = pvolume_info->rsize; + else /* default */ + cifs_sb->rsize = CIFSMaxBufSize; + + if (pvolume_info->wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) { + cERROR(1, ("wsize %d too large, using 4096 instead", + pvolume_info->wsize)); + cifs_sb->wsize = 4096; + } else if (pvolume_info->wsize) + cifs_sb->wsize = pvolume_info->wsize; + else + cifs_sb->wsize = min_t(const int, + PAGEVEC_SIZE * PAGE_CACHE_SIZE, + 127*1024); + /* old default of CIFSMaxBufSize was too small now + that SMB Write2 can send multiple pages in kvec. + RFC1001 does not describe what happens when frame + bigger than 128K is sent so use that as max in + conjunction with 52K kvec constraint on arch with 4K + page size */ + + if (cifs_sb->rsize < 2048) { + cifs_sb->rsize = 2048; + /* Windows ME may prefer this */ + cFYI(1, ("readsize set to minimum: 2048")); + } + /* calculate prepath */ + cifs_sb->prepath = pvolume_info->prepath; + if (cifs_sb->prepath) { + cifs_sb->prepathlen = strlen(cifs_sb->prepath); + /* we can not convert the / to \ in the path + separators in the prefixpath yet because we do not + know (until reset_cifs_unix_caps is called later) + whether POSIX PATH CAP is available. We normalize + the / to \ after reset_cifs_unix_caps is called */ + pvolume_info->prepath = NULL; + } else + cifs_sb->prepathlen = 0; + cifs_sb->mnt_uid = pvolume_info->linux_uid; + cifs_sb->mnt_gid = pvolume_info->linux_gid; + cifs_sb->mnt_file_mode = pvolume_info->file_mode; + cifs_sb->mnt_dir_mode = pvolume_info->dir_mode; + cFYI(1, ("file mode: 0x%x dir mode: 0x%x", + cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode)); + + if (pvolume_info->noperm) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM; + if (pvolume_info->setuids) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SET_UID; + if (pvolume_info->server_ino) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SERVER_INUM; + if (pvolume_info->remap) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_MAP_SPECIAL_CHR; + if (pvolume_info->no_xattr) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_XATTR; + if (pvolume_info->sfu_emul) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_UNX_EMUL; + if (pvolume_info->nobrl) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_BRL; + if (pvolume_info->cifs_acl) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL; + if (pvolume_info->override_uid) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID; + if (pvolume_info->override_gid) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID; + if (pvolume_info->dynperm) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM; + if (pvolume_info->direct_io) { + cFYI(1, ("mounting share using direct i/o")); + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO; + } + + if ((pvolume_info->cifs_acl) && (pvolume_info->dynperm)) + cERROR(1, ("mount option dynperm ignored if cifsacl " + "mount option supported")); +} + int cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, char *mount_data, const char *devname) @@ -1996,9 +2082,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, goto out; } - if (srvTcp) { - cFYI(1, ("Existing tcp session with server found")); - } else { /* create socket */ + if (!srvTcp) { /* create socket */ if (volume_info.port) sin_server.sin_port = htons(volume_info.port); else @@ -2074,7 +2158,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, cFYI(1, ("Existing smb sess found (status=%d)", pSesInfo->status)); down(&pSesInfo->sesSem); - if (pSesInfo->status == CifsNeedReconnect) { + if (pSesInfo->need_reconnect) { cFYI(1, ("Session needs reconnect")); rc = cifs_setup_session(xid, pSesInfo, cifs_sb->local_nls); @@ -2124,146 +2208,59 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* search for existing tcon to this server share */ if (!rc) { - if (volume_info.rsize > CIFSMaxBufSize) { - cERROR(1, ("rsize %d too large, using MaxBufSize", - volume_info.rsize)); - cifs_sb->rsize = CIFSMaxBufSize; - } else if ((volume_info.rsize) && - (volume_info.rsize <= CIFSMaxBufSize)) - cifs_sb->rsize = volume_info.rsize; - else /* default */ - cifs_sb->rsize = CIFSMaxBufSize; - - if (volume_info.wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) { - cERROR(1, ("wsize %d too large, using 4096 instead", - volume_info.wsize)); - cifs_sb->wsize = 4096; - } else if (volume_info.wsize) - cifs_sb->wsize = volume_info.wsize; - else - cifs_sb->wsize = - min_t(const int, PAGEVEC_SIZE * PAGE_CACHE_SIZE, - 127*1024); - /* old default of CIFSMaxBufSize was too small now - that SMB Write2 can send multiple pages in kvec. - RFC1001 does not describe what happens when frame - bigger than 128K is sent so use that as max in - conjunction with 52K kvec constraint on arch with 4K - page size */ - - if (cifs_sb->rsize < 2048) { - cifs_sb->rsize = 2048; - /* Windows ME may prefer this */ - cFYI(1, ("readsize set to minimum: 2048")); - } - /* calculate prepath */ - cifs_sb->prepath = volume_info.prepath; - if (cifs_sb->prepath) { - cifs_sb->prepathlen = strlen(cifs_sb->prepath); - /* we can not convert the / to \ in the path - separators in the prefixpath yet because we do not - know (until reset_cifs_unix_caps is called later) - whether POSIX PATH CAP is available. We normalize - the / to \ after reset_cifs_unix_caps is called */ - volume_info.prepath = NULL; - } else - cifs_sb->prepathlen = 0; - cifs_sb->mnt_uid = volume_info.linux_uid; - cifs_sb->mnt_gid = volume_info.linux_gid; - cifs_sb->mnt_file_mode = volume_info.file_mode; - cifs_sb->mnt_dir_mode = volume_info.dir_mode; - cFYI(1, ("file mode: 0x%x dir mode: 0x%x", - cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode)); - - if (volume_info.noperm) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM; - if (volume_info.setuids) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SET_UID; - if (volume_info.server_ino) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SERVER_INUM; - if (volume_info.remap) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_MAP_SPECIAL_CHR; - if (volume_info.no_xattr) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_XATTR; - if (volume_info.sfu_emul) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_UNX_EMUL; - if (volume_info.nobrl) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_BRL; - if (volume_info.cifs_acl) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL; - if (volume_info.override_uid) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID; - if (volume_info.override_gid) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID; - if (volume_info.dynperm) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM; - if (volume_info.direct_io) { - cFYI(1, ("mounting share using direct i/o")); - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO; - } - - if ((volume_info.cifs_acl) && (volume_info.dynperm)) - cERROR(1, ("mount option dynperm ignored if cifsacl " - "mount option supported")); + setup_cifs_sb(&volume_info, cifs_sb); tcon = find_unc(sin_server.sin_addr.s_addr, volume_info.UNC, volume_info.username); if (tcon) { cFYI(1, ("Found match on UNC path")); - /* we can have only one retry value for a connection - to a share so for resources mounted more than once - to the same server share the last value passed in - for the retry flag is used */ - tcon->retry = volume_info.retry; - tcon->nocase = volume_info.nocase; - tcon->local_lease = volume_info.local_lease; if (tcon->seal != volume_info.seal) cERROR(1, ("transport encryption setting " "conflicts with existing tid")); } else { tcon = tconInfoAlloc(); - if (tcon == NULL) + if (tcon == NULL) { rc = -ENOMEM; - else { - /* check for null share name ie connecting to - * dfs root */ - - /* BB check if this works for exactly length - * three strings */ - if ((strchr(volume_info.UNC + 3, '\\') == NULL) - && (strchr(volume_info.UNC + 3, '/') == - NULL)) { -/* rc = connect_to_dfs_path(xid, pSesInfo, - "", cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR);*/ - cFYI(1, ("DFS root not supported")); - rc = -ENODEV; - goto out; - } else { - /* BB Do we need to wrap sesSem around - * this TCon call and Unix SetFS as - * we do on SessSetup and reconnect? */ - rc = CIFSTCon(xid, pSesInfo, - volume_info.UNC, - tcon, cifs_sb->local_nls); - cFYI(1, ("CIFS Tcon rc = %d", rc)); - if (volume_info.nodfs) { - tcon->Flags &= - ~SMB_SHARE_IS_IN_DFS; - cFYI(1, ("DFS disabled (%d)", - tcon->Flags)); - } - } - if (!rc) { - atomic_inc(&pSesInfo->inUse); - tcon->retry = volume_info.retry; - tcon->nocase = volume_info.nocase; - tcon->seal = volume_info.seal; + goto mount_fail_check; + } + + /* check for null share name ie connect to dfs root */ + + /* BB check if works for exactly length 3 strings */ + if ((strchr(volume_info.UNC + 3, '\\') == NULL) + && (strchr(volume_info.UNC + 3, '/') == NULL)) { + /* rc = connect_to_dfs_path(...) */ + cFYI(1, ("DFS root not supported")); + rc = -ENODEV; + goto mount_fail_check; + } else { + /* BB Do we need to wrap sesSem around + * this TCon call and Unix SetFS as + * we do on SessSetup and reconnect? */ + rc = CIFSTCon(xid, pSesInfo, volume_info.UNC, + tcon, cifs_sb->local_nls); + cFYI(1, ("CIFS Tcon rc = %d", rc)); + if (volume_info.nodfs) { + tcon->Flags &= ~SMB_SHARE_IS_IN_DFS; + cFYI(1, ("DFS disabled (%d)", + tcon->Flags)); } } + if (!rc) { + atomic_inc(&pSesInfo->inUse); + tcon->seal = volume_info.seal; + } else + goto mount_fail_check; } + + /* we can have only one retry value for a connection + to a share so for resources mounted more than once + to the same server share the last value passed in + for the retry flag is used */ + tcon->retry = volume_info.retry; + tcon->nocase = volume_info.nocase; + tcon->local_lease = volume_info.local_lease; } if (pSesInfo) { if (pSesInfo->capabilities & CAP_LARGE_FILES) { @@ -2276,6 +2273,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, sb->s_time_gran = 100; /* on error free sesinfo and tcon struct if needed */ +mount_fail_check: if (rc) { /* if session setup failed, use count is zero but we still need to free cifsd thread */ @@ -3518,6 +3516,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, /* above now done in SendReceive */ if ((rc == 0) && (tcon != NULL)) { tcon->tidStatus = CifsGood; + tcon->need_reconnect = false; tcon->tid = smb_buffer_response->Tid; bcc_ptr = pByteArea(smb_buffer_response); length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2); @@ -3746,6 +3745,7 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, cFYI(1, ("CIFS Session Established successfully")); spin_lock(&GlobalMid_Lock); pSesInfo->status = CifsGood; + pSesInfo->need_reconnect = false; spin_unlock(&GlobalMid_Lock); } diff --git a/fs/cifs/file.c b/fs/cifs/file.c index ead1a3bb0256..1540adaa593d 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -493,7 +493,7 @@ int cifs_close(struct inode *inode, struct file *file) if (pTcon) { /* no sense reconnecting to close a file that is already closed */ - if (pTcon->tidStatus != CifsNeedReconnect) { + if (!pTcon->need_reconnect) { timeout = 2; while ((atomic_read(&pSMBFile->wrtPending) != 0) && (timeout <= 2048)) { -- cgit v1.2.3 From fb396016647ae9de5b3bd8c4ee4f7b9cc7148bd5 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 13 Nov 2008 20:04:07 +0000 Subject: [CIFS] remove unused list, add new cifs sock list to prepare for mount/umount fix Also adds two lines missing from the previous patch (for the need reconnect flag in the /proc/fs/cifs/DebugData handling) The new global_cifs_sock_list is added, and initialized in init_cifs but not used yet. Jeff Layton will be adding code in to use that and to remove the GlobalTcon and GlobalSMBSession lists. CC: Jeff Layton CC: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 4 ++-- fs/cifs/cifsfs.c | 6 +++--- fs/cifs/cifsglob.h | 23 ++++++++--------------- 3 files changed, 13 insertions(+), 20 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 69a12aae91d3..ba8723d95996 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -204,7 +204,7 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) else seq_printf(m, " type: %d ", dev_type); - if (tcon->tidStatus == CifsNeedReconnect) + if (tcon->need_reconnect) seq_puts(m, "\tDISCONNECTED "); } read_unlock(&GlobalSMBSeslock); @@ -311,7 +311,7 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v) i++; tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); seq_printf(m, "\n%d) %s", i, tcon->treeName); - if (tcon->tidStatus == CifsNeedReconnect) + if (tcon->need_reconnect) seq_puts(m, "\tDISCONNECTED "); seq_printf(m, "\nSMBs: %d Oplock Breaks: %d", atomic_read(&tcon->num_smbs_sent), diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 903bbd6449d1..af16a2406b1c 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1059,9 +1059,9 @@ init_cifs(void) { int rc = 0; cifs_proc_init(); -/* INIT_LIST_HEAD(&GlobalServerList);*/ /* BB not implemented yet */ - INIT_LIST_HEAD(&GlobalSMBSessionList); - INIT_LIST_HEAD(&GlobalTreeConnectionList); + INIT_LIST_HEAD(&global_cifs_sock_list); + INIT_LIST_HEAD(&GlobalSMBSessionList); /* BB to be removed by jl */ + INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); #ifdef CONFIG_CIFS_EXPERIMENTAL INIT_LIST_HEAD(&GlobalDnotifyReqList); diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index dc0aa140f1bf..d6357dc1be72 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -592,22 +592,15 @@ require use of the stronger protocol */ #define GLOBAL_EXTERN extern #endif -/* - * The list of servers that did not respond with NT LM 0.12. - * This list helps improve performance and eliminate the messages indicating - * that we had a communications error talking to the server in this list. - */ -/* Feature not supported */ -/* GLOBAL_EXTERN struct servers_not_supported *NotSuppList; */ - -/* - * The following is a hash table of all the users we know about. - */ -GLOBAL_EXTERN struct smbUidInfo *GlobalUidList[UID_HASH]; -/* GLOBAL_EXTERN struct list_head GlobalServerList; BB not implemented yet */ -GLOBAL_EXTERN struct list_head GlobalSMBSessionList; -GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; +/* the list of TCP_Server_Info structures, ie each of the sockets + * connecting our client to a distinct server (ip address), is + * chained together by global_cifs_sock_list. The list of all our SMB + * sessions (and from that the tree connections) can be found + * by iterating over global_cifs_sock_list */ +GLOBAL_EXTERN struct list_head global_cifs_sock_list; +GLOBAL_EXTERN struct list_head GlobalSMBSessionList; /* BB to be removed by jl*/ +GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ GLOBAL_EXTERN struct list_head GlobalOplock_Q; -- cgit v1.2.3 From 6c5ab376b0b579cf58f9217dcd7a94d817f7a043 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 31 Oct 2008 10:09:57 -0700 Subject: USB: vstusb: fix compiler warning on x86-64 This fixes a reported compiler warning. Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/vstusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c index 8648470c81ca..63dff9ba73c5 100644 --- a/drivers/usb/misc/vstusb.c +++ b/drivers/usb/misc/vstusb.c @@ -620,7 +620,7 @@ static long vstusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) __func__); retval = -EFAULT; } else { - dev_dbg(&dev->dev, "%s: recv %d bytes from pipe %d\n", + dev_dbg(&dev->dev, "%s: recv %zd bytes from pipe %d\n", __func__, usb_data.count, usb_data.pipe); } -- cgit v1.2.3 From 0047ca0a45c6a481abd467fb52d2a480ffc8c6b9 Mon Sep 17 00:00:00 2001 From: Paul Ready Date: Wed, 29 Oct 2008 14:25:50 -0700 Subject: USB: add Nikon D300 camera to unusual_devs Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11685 When A Nikon D300 camera is connected to a system it is seen in /proc/bus/pci/devices but is not accessible. This is seen in the above file: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=03 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b0 ProdID=041a Rev= 1.03 S: Manufacturer=NIKON S: Product=NIKON DSC D300 S: SerialNumber=000008014379 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=usbfs E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Cc: Alan Stern Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fb9e20e624c1..f379291d5387 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -418,6 +418,13 @@ UNUSUAL_DEV( 0x04b0, 0x0417, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by paul ready */ +UNUSUAL_DEV( 0x04b0, 0x0419, 0x0100, 0x0200, + "NIKON", + "NIKON DSC D300", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Reported by Doug Maxey (dwm@austin.ibm.com) */ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, "IBM", -- cgit v1.2.3 From 352d026338378b1f13f044e33c1047da6e470056 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 29 Oct 2008 15:16:58 -0400 Subject: USB: don't register endpoints for interfaces that are going away This patch (as1155) fixes a bug in usbcore. When interfaces are deleted, either because the device was disconnected or because of a configuration change, the extra attribute files and child endpoint devices may get left behind. This is because the core removes them before calling device_del(). But during device_del(), after the driver is unbound the core will reinstall altsetting 0 and recreate those extra attributes and children. The patch prevents this by adding a flag to record when the interface is in the midst of being unregistered. When the flag is set, the attribute files and child devices will not be created. Signed-off-by: Alan Stern Cc: stable [2.6.27, 2.6.26, 2.6.25] Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 1 + drivers/usb/core/sysfs.c | 2 +- include/linux/usb.h | 2 ++ 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 887738577b28..6d1048faf08e 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1091,6 +1091,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) continue; dev_dbg(&dev->dev, "unregistering interface %s\n", dev_name(&interface->dev)); + interface->unregistering = 1; usb_remove_sysfs_intf_files(interface); device_del(&interface->dev); } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index f66fba11fbd5..4fb65fdc9dc3 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -840,7 +840,7 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf) struct usb_host_interface *alt = intf->cur_altsetting; int retval; - if (intf->sysfs_files_created) + if (intf->sysfs_files_created || intf->unregistering) return 0; /* The interface string may be present in some altsettings diff --git a/include/linux/usb.h b/include/linux/usb.h index 8fa973bede5e..f72aa51f7bcd 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -108,6 +108,7 @@ enum usb_interface_condition { * (in probe()), bound to a driver, or unbinding (in disconnect()) * @is_active: flag set when the interface is bound and not suspended. * @sysfs_files_created: sysfs attributes exist + * @unregistering: flag set when the interface is being unregistered * @needs_remote_wakeup: flag set when the driver requires remote-wakeup * capability during autosuspend. * @needs_altsetting0: flag set when a set-interface request for altsetting 0 @@ -163,6 +164,7 @@ struct usb_interface { enum usb_interface_condition condition; /* state of binding */ unsigned is_active:1; /* the interface is not suspended */ unsigned sysfs_files_created:1; /* the sysfs attributes exist */ + unsigned unregistering:1; /* unregistration is in progress */ unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */ unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */ unsigned needs_binding:1; /* needs delayed unbind/rebind */ -- cgit v1.2.3 From f82a689faeb328ba7c194782f42cc438519d508e Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Wed, 29 Oct 2008 15:10:31 +0200 Subject: usb: musb: Fix for isochronous IN transfer Fixes blurred capture images in dma mode. Isochronous error field in urb and source data buffer pointer were not updated properly in dma mode. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 77 ++++++++++++++++++++++++++++++++------------ 1 file changed, 57 insertions(+), 20 deletions(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 3133990f04ec..981d49738ec5 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1507,10 +1507,29 @@ void musb_host_rx(struct musb *musb, u8 epnum) musb_writew(hw_ep->regs, MUSB_RXCSR, val); #ifdef CONFIG_USB_INVENTRA_DMA + if (usb_pipeisoc(pipe)) { + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + d->actual_length = xfer_len; + + /* even if there was an error, we did the dma + * for iso_frame_desc->length + */ + if (d->status != EILSEQ && d->status != -EOVERFLOW) + d->status = 0; + + if (++qh->iso_idx >= urb->number_of_packets) + done = true; + else + done = false; + + } else { /* done if urb buffer is full or short packet is recd */ done = (urb->actual_length + xfer_len >= urb->transfer_buffer_length || dma->actual_len < qh->maxpacket); + } /* send IN token for next packet, without AUTOREQ */ if (!done) { @@ -1547,7 +1566,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (dma) { struct dma_controller *c; u16 rx_count; - int ret; + int ret, length; + dma_addr_t buf; rx_count = musb_readw(epio, MUSB_RXCOUNT); @@ -1560,6 +1580,35 @@ void musb_host_rx(struct musb *musb, u8 epnum) c = musb->dma_controller; + if (usb_pipeisoc(pipe)) { + int status = 0; + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + + if (iso_err) { + status = -EILSEQ; + urb->error_count++; + } + if (rx_count > d->length) { + if (status == 0) { + status = -EOVERFLOW; + urb->error_count++; + } + DBG(2, "** OVERFLOW %d into %d\n",\ + rx_count, d->length); + + length = d->length; + } else + length = rx_count; + d->status = status; + buf = urb->transfer_dma + d->offset; + } else { + length = rx_count; + buf = urb->transfer_dma + + urb->actual_length; + } + dma->desired_mode = 0; #ifdef USE_MODE1 /* because of the issue below, mode 1 will @@ -1571,6 +1620,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) urb->actual_length) > qh->maxpacket) dma->desired_mode = 1; + if (rx_count < hw_ep->max_packet_sz_rx) { + length = rx_count; + dma->bDesiredMode = 0; + } else { + length = urb->transfer_buffer_length; + } #endif /* Disadvantage of using mode 1: @@ -1608,12 +1663,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) */ ret = c->channel_program( dma, qh->maxpacket, - dma->desired_mode, - urb->transfer_dma - + urb->actual_length, - (dma->desired_mode == 0) - ? rx_count - : urb->transfer_buffer_length); + dma->desired_mode, buf, length); if (!ret) { c->channel_release(dma); @@ -1631,19 +1681,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) } } - if (dma && usb_pipeisoc(pipe)) { - struct usb_iso_packet_descriptor *d; - int iso_stat = status; - - d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length += xfer_len; - if (iso_err) { - iso_stat = -EILSEQ; - urb->error_count++; - } - d->status = iso_stat; - } - finish: urb->actual_length += xfer_len; qh->offset += xfer_len; -- cgit v1.2.3 From 14a2c96f72e0939cb817b6624346b0161b5603db Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 29 Oct 2008 15:10:36 +0200 Subject: usb: musb: tusb6010: kill compile warning Add an errno to failing case. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/tusb6010.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index b73b036f3d77..ee8fca92a4ac 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -605,7 +605,7 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode) if (musb->board_mode != MUSB_OTG) { ERR("Changing mode currently only supported in OTG mode\n"); - return; + return -EINVAL; } otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); -- cgit v1.2.3 From eef767b761bdd08200fbbfc910ab815d03787326 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Wed, 29 Oct 2008 15:10:38 +0200 Subject: usb: musb: Removes compilation warning in gadget mode Fixes compilation warning when musb is configured in gadget mode. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 9d2dcb121c5e..ce6c162920f7 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -53,7 +53,9 @@ static void musb_do_idle(unsigned long _musb) { struct musb *musb = (void *)_musb; unsigned long flags; +#ifdef CONFIG_USB_MUSB_HDRC_HCD u8 power; +#endif u8 devctl; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); -- cgit v1.2.3 From b60c72abdbd44ed2a63fa80455d0b7f18ce76d2b Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 29 Oct 2008 15:10:39 +0200 Subject: usb: musb: fix debug global variable name In order to avoid namespace conflicts, add a prefix to our kernel-wise symbol. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 6 +++--- drivers/usb/musb/musb_debug.h | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 4a35745b30be..5280dba9b1fb 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -114,8 +114,8 @@ -unsigned debug; -module_param(debug, uint, S_IRUGO | S_IWUSR); +unsigned musb_debug; +module_param(musb_debug, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug message level. Default = 0"); #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" @@ -2248,7 +2248,7 @@ static int __init musb_init(void) "host" #endif ", debug=%d\n", - musb_driver_name, debug); + musb_driver_name, musb_debug); return platform_driver_probe(&musb_driver, musb_probe); } diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h index 4d2794441b15..9fc1db44c72c 100644 --- a/drivers/usb/musb/musb_debug.h +++ b/drivers/usb/musb/musb_debug.h @@ -48,11 +48,11 @@ __func__, __LINE__ , ## args); \ } } while (0) -extern unsigned debug; +extern unsigned musb_debug; static inline int _dbg_level(unsigned l) { - return debug >= l; + return musb_debug >= l; } #define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args) -- cgit v1.2.3 From 23d15e070c2fe5d341ca04275f6ea1b5a5fcb26f Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Wed, 29 Oct 2008 15:10:35 +0200 Subject: usb: musb: fix BULK request on different available endpoints Fixes co-working issue of usb serial device with usb/net devices while oter endpoints are free and can be used.This patch implements the policy that if endpoint resources are available then different BULK request goes to different endpoint otherwise they are multiplexed to one reserved endpoint as currently done. Switch statement case is reordered in musb_giveback() to take care of bulk request both in multiplex scenario and otherwise. NAK limit scheme has to be added for multiplexed BULK request scenario to avoid endpoint starvation due to usb/net devices. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 82 ++++++++++++++++++++++++-------------------- drivers/usb/musb/musb_host.h | 1 + 2 files changed, 46 insertions(+), 37 deletions(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 981d49738ec5..e45e70bcc5e2 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -378,6 +378,19 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) switch (qh->type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + /* fifo policy for these lists, except that NAKing + * should rotate a qh to the end (for fairness). + */ + if (qh->mux == 1) { + head = qh->ring.prev; + list_del(&qh->ring); + kfree(qh); + qh = first_qh(head); + break; + } + case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: /* this is where periodic bandwidth should be @@ -388,17 +401,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) kfree(qh); qh = NULL; break; - - case USB_ENDPOINT_XFER_CONTROL: - case USB_ENDPOINT_XFER_BULK: - /* fifo policy for these lists, except that NAKing - * should rotate a qh to the end (for fairness). - */ - head = qh->ring.prev; - list_del(&qh->ring); - kfree(qh); - qh = first_qh(head); - break; } } return qh; @@ -1708,22 +1710,9 @@ static int musb_schedule( struct list_head *head = NULL; /* use fixed hardware for control and bulk */ - switch (qh->type) { - case USB_ENDPOINT_XFER_CONTROL: + if (qh->type == USB_ENDPOINT_XFER_CONTROL) { head = &musb->control; hw_ep = musb->control_ep; - break; - case USB_ENDPOINT_XFER_BULK: - hw_ep = musb->bulk_ep; - if (is_in) - head = &musb->in_bulk; - else - head = &musb->out_bulk; - break; - } - if (head) { - idle = list_empty(head); - list_add_tail(&qh->ring, head); goto success; } @@ -1762,19 +1751,34 @@ static int musb_schedule( else diff = hw_ep->max_packet_sz_tx - qh->maxpacket; - if (diff > 0 && best_diff > diff) { + if (diff >= 0 && best_diff > diff) { best_diff = diff; best_end = epnum; } } - if (best_end < 0) + /* use bulk reserved ep1 if no other ep is free */ + if (best_end > 0 && qh->type == USB_ENDPOINT_XFER_BULK) { + hw_ep = musb->bulk_ep; + if (is_in) + head = &musb->in_bulk; + else + head = &musb->out_bulk; + goto success; + } else if (best_end < 0) { return -ENOSPC; + } idle = 1; + qh->mux = 0; hw_ep = musb->endpoints + best_end; musb->periodic[best_end] = qh; DBG(4, "qh %p periodic slot %d\n", qh, best_end); success: + if (head) { + idle = list_empty(head); + list_add_tail(&qh->ring, head); + qh->mux = 1; + } qh->hw_ep = hw_ep; qh->hep->hcpriv = qh; if (idle) @@ -2052,11 +2056,13 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (usb_pipein(urb->pipe)) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (usb_pipein(urb->pipe)) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic * transfers won't always be at the head of a @@ -2104,11 +2110,13 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (is_in) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (is_in) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic transfers * won't always be at the head of a singleton queue... diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 77bcdb9d5b32..0b7fbcd21963 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -53,6 +53,7 @@ struct musb_qh { struct list_head ring; /* of musb_qh */ /* struct musb_qh *next; */ /* for periodic tree */ + u8 mux; /* qh multiplexed to hw_ep */ unsigned offset; /* in urb->transfer_buffer */ unsigned segsize; /* current xfer fragment */ -- cgit v1.2.3 From c6206faa4f18bcc837a12552b8c184ab1668fdea Mon Sep 17 00:00:00 2001 From: Leslie Watter Date: Wed, 12 Nov 2008 15:10:07 -0200 Subject: USB: Add YISO u893 usb modem vendor and product IDs to option driver This patch adds YISO u893 usb modem vendor and product ID to option.c. I had a better experience using this modification and the same system. Signed-off-by: Leslie Harlley Watter Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bd07eaa300b9..6fa1ec441b61 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -160,6 +160,11 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define NOVATELWIRELESS_VENDOR_ID 0x1410 +/* YISO PRODUCTS */ + +#define YISO_VENDOR_ID 0x0EAB +#define YISO_PRODUCT_U893 0xC893 + /* MERLIN EVDO PRODUCTS */ #define NOVATELWIRELESS_PRODUCT_V640 0x1100 #define NOVATELWIRELESS_PRODUCT_V620 0x1110 @@ -408,6 +413,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, + { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) }, -- cgit v1.2.3 From 2870fde780bbdf6442e9efe7ca5fc11bcdd2a09a Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sun, 9 Nov 2008 11:40:30 +0530 Subject: USB: mention URB_FREE_BUFFER in usb_free_urb documentation The usb_free_urb comment says that the transfer buffer will not be freed, but this is not the case when URB_FREE_BUFFER is set. Signed-off-by: Rabin Vincent Acked-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/urb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 4342bd9c3bb6..1f68af9db3f7 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -85,8 +85,8 @@ EXPORT_SYMBOL_GPL(usb_alloc_urb); * Must be called when a user of a urb is finished with it. When the last user * of the urb calls this function, the memory of the urb is freed. * - * Note: The transfer buffer associated with the urb is not freed, that must be - * done elsewhere. + * Note: The transfer buffer associated with the urb is not freed unless the + * URB_FREE_BUFFER transfer flag is set. */ void usb_free_urb(struct urb *urb) { -- cgit v1.2.3 From 881e3c9867c585e632dfa4ccb0848b62debc64c7 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Sun, 9 Nov 2008 20:17:54 +0000 Subject: USB: CP2101 Add device ID for AMB2560 This patch adds the device vendor and product IDs for Amber Wireless AMB2560 Signed-off-by: Craig Shelley Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 8008d0bc80ad..f073b5897744 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -85,6 +85,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ + { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ -- cgit v1.2.3 From ad0b65efd12d020b046cde8d6f474e37bb98dd73 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Thu, 6 Nov 2008 11:19:11 -0800 Subject: USB: cdc-acm.c: fix recursive lock in acm_start_wb error path Fixes an obvious bug in cdc-acm by avoiding a recursive lock on acm_start_wb()'s error path. Should apply towards 2.6.27 stable and 2.6.28. ============================================= [ INFO: possible recursive locking detected ] 2.6.27-2-pae #109 --------------------------------------------- python/31449 is trying to acquire lock: (&acm->write_lock){++..}, at: [] acm_start_wb+0x5c/0x7b [cdc_acm] but task is already holding lock: (&acm->write_lock){++..}, at: [] acm_tty_write+0xe1/0x167 [cdc_acm] other info that might help us debug this: 2 locks held by python/31449: #0: (&tty->atomic_write_lock){--..}, at: [] tty_write_lock+0x14/0x3b #1: (&acm->write_lock){++..}, at: [] acm_tty_write+0xe1/0x167 [cdc_acm] stack backtrace: Pid: 31449, comm: python Not tainted 2.6.27-2-pae #109 [] ? printk+0xf/0x18 [] __lock_acquire+0xc7b/0x1316 [] lock_acquire+0x70/0x97 [] ? acm_start_wb+0x5c/0x7b [cdc_acm] [] _spin_lock_irqsave+0x37/0x47 [] ? acm_start_wb+0x5c/0x7b [cdc_acm] [] acm_start_wb+0x5c/0x7b [cdc_acm] [] acm_tty_write+0x143/0x167 [cdc_acm] [] write_chan+0x1cd/0x297 [] ? default_wake_function+0x0/0xd [] tty_write+0x149/0x1b9 [] ? write_chan+0x0/0x297 [] ? rw_verify_area+0x76/0x98 [] ? tty_write+0x0/0x1b9 [] vfs_write+0x8c/0x136 [] sys_write+0x3b/0x60 [] sysenter_do_call+0x12/0x3f ======================= Signed-off-by: Brandon Philips Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 20104443081a..d50a99f70aee 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -158,16 +158,12 @@ static int acm_wb_is_avail(struct acm *acm) } /* - * Finish write. + * Finish write. Caller must hold acm->write_lock */ static void acm_write_done(struct acm *acm, struct acm_wb *wb) { - unsigned long flags; - - spin_lock_irqsave(&acm->write_lock, flags); wb->use = 0; acm->transmitting--; - spin_unlock_irqrestore(&acm->write_lock, flags); } /* @@ -482,6 +478,7 @@ static void acm_write_bulk(struct urb *urb) { struct acm_wb *wb = urb->context; struct acm *acm = wb->instance; + unsigned long flags; if (verbose || urb->status || (urb->actual_length != urb->transfer_buffer_length)) @@ -490,7 +487,9 @@ static void acm_write_bulk(struct urb *urb) urb->transfer_buffer_length, urb->status); + spin_lock_irqsave(&acm->write_lock, flags); acm_write_done(acm, wb); + spin_unlock_irqrestore(&acm->write_lock, flags); if (ACM_READY(acm)) schedule_work(&acm->work); else -- cgit v1.2.3 From 8010e06cc90367b4d3fba3b0ec3ced32360ac890 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 4 Nov 2008 11:33:35 -0500 Subject: USB: unusual_devs entry for Argosy USB mass-storage interface This patch (as1162) adds an unusual_devs entry for Argosy's USB-IDE interface. This fixes Bugzilla #11843. Signed-off-by: Alan Stern Tested-by: Luciano Rocha Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index f379291d5387..b2ec15208523 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1265,6 +1265,13 @@ UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), +/* Reported by Luciano Rocha */ +UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001, + "Argosy", + "Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Entry and supporting patch by Theodore Kilgore . * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with -- cgit v1.2.3 From ddcb01ff9bf49c4dbbb058423559f7bc90b89374 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 31 Oct 2008 13:52:54 -0700 Subject: USB: Fix PS3 USB shutdown problems Add ehci_shutdown() or ohci_shutdown() calls to the USB PS3 bus glue. ehci_shutdown() and ohci_shutdown() do some controller specific cleanups not done by usb_remove_hcd(). Fixes errors on shutdown or reboot similar to these: ps3-ehci-driver sb_07: HC died; cleaning up irq 51: nobody cared (try booting with the "irqpoll" option) Related bugzilla reports: http://bugzilla.kernel.org/show_bug.cgi?id=11819 http://bugzilla.terrasoftsolutions.com/show_bug.cgi?id=317 Signed-off-by: Geoff Levand Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-ps3.c | 1 + drivers/usb/host/ohci-ps3.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 0eba894bcb01..9c9da35abc6c 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -205,6 +205,7 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev) tmp = hcd->irq; + ehci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_driver_data(dev, NULL); diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 2089d8a46c4b..3c1a3b5f89f1 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -192,7 +192,7 @@ fail_start: return result; } -static int ps3_ohci_remove (struct ps3_system_bus_device *dev) +static int ps3_ohci_remove(struct ps3_system_bus_device *dev) { unsigned int tmp; struct usb_hcd *hcd = @@ -205,6 +205,7 @@ static int ps3_ohci_remove (struct ps3_system_bus_device *dev) tmp = hcd->irq; + ohci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_driver_data(dev, NULL); -- cgit v1.2.3 From 659d643462fba8187f90f7604a9e0be144e242bc Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Thu, 30 Oct 2008 08:42:43 -0700 Subject: USB: storage: adjust comment in Kconfig Since commit 65934a9 ("Make USB storage depend on SCSI rather than selecting it [try #6]") the comment at the top of drivers/usb/storage/Kconfig is incorrect. Adjust it to the current situation. Signed-off-by: Paul Bolle Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 3d9249632ae1..c68b738900bd 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,8 +2,8 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" -comment "may also be needed; see USB_STORAGE Help for more information" +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;" +comment "see USB_STORAGE Help for more information" depends on USB config USB_STORAGE -- cgit v1.2.3 From 9a18e75fc443d24d25ee0fcf892a64a9741f6294 Mon Sep 17 00:00:00 2001 From: Damir N Abdullin Date: Thu, 30 Oct 2008 13:52:38 -0700 Subject: + usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm tree Enfora GSM2228 based on Cygnal Integrated Products chip uses the same cp2101 driver. Signed-off-by: Damir N Abdullin Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index f073b5897744..9035d7256b03 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,6 +67,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ + { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ -- cgit v1.2.3 From ff30bf1ca4b548c0928dae6bfce89458b95e5bf4 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 2 Nov 2008 15:25:42 +0100 Subject: USB: remove optional bus bindings in isp1760, fixing runtime warning Roland Reported the following: | kmem_cache_create: duplicate cache isp1760_qtd | Pid: 461, comm: modprobe Tainted: G W 2.6.28-rc2-git3-default #4 | Call Trace: | [] kmem_cache_create+0xc9/0x3a3 | [] free_pages_bulk+0x16c/0x1c9 | [] isp1760_init+0x0/0xb [isp1760] | [] init_kmem_once+0x18/0x5f [isp1760] | [] isp1760_init+0x5/0xb [isp1760] | [] _stext+0x4d/0x148 | [] load_module+0x12cd/0x142e | [] kmem_cache_destroy+0x0/0xd7 | [] sys_init_module+0x87/0x176 | [] sysenter_do_call+0x12/0x2f The reason, is that ret is initialized with ENODEV instead of 0 _or_ the kmem cache is not freed in error case with no bus binding. The difference between OF+PCI and OF only is | 15148 804 32 15984 3e70 isp1760-of-pci.o | 13748 676 8 14432 3860 isp1760-of.o about 1.5 KiB. Until there is a checkbox where the user *must* select atleast one item, and may select multiple entries I don't make it selectable anymore. Having a driver which can't be used under any circumstances is broken anyway and I've seen distros shipping it that way. Reported-by: Roland Kletzing Signed-off-by: Sebastian Andrzej Siewior a Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 23 ++++++----------------- drivers/usb/host/isp1760-if.c | 22 +++++++++++----------- 2 files changed, 17 insertions(+), 28 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 56f592dc0b36..f3a75a929e0a 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -110,29 +110,18 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB && EXPERIMENTAL + depends on USB && EXPERIMENTAL && (PCI || PPC_OF) ---help--- The ISP1760 chip is a USB 2.0 host controller. This driver does not support isochronous transfers or OTG. + This USB controller is usually attached to a non-DMA-Master + capable bus. NXP's eval kit brings this chip on PCI card + where the chip itself is behind a PLB to simulate such + a bus. To compile this driver as a module, choose M here: the - module will be called isp1760-hcd. - -config USB_ISP1760_PCI - bool "Support for the PCI bus" - depends on USB_ISP1760_HCD && PCI - ---help--- - Enables support for the device present on the PCI bus. - This should only be required if you happen to have the eval kit from - NXP and you are going to test it. - -config USB_ISP1760_OF - bool "Support for the OF platform bus" - depends on USB_ISP1760_HCD && PPC_OF - ---help--- - Enables support for the device present on the PowerPC - OpenFirmware platform bus. + module will be called isp1760. config USB_OHCI_HCD tristate "OHCI HCD support" diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index af849f596135..b87ca7cf4b37 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -14,16 +14,16 @@ #include "../core/hcd.h" #include "isp1760-hcd.h" -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF #include #include #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI #include #endif -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF static int of_isp1760_probe(struct of_device *dev, const struct of_device_id *match) { @@ -128,7 +128,7 @@ static struct of_platform_driver isp1760_of_driver = { }; #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI static u32 nxp_pci_io_base; static u32 iolength; static u32 pci_mem_phy0; @@ -288,28 +288,28 @@ static struct pci_driver isp1761_pci_driver = { static int __init isp1760_init(void) { - int ret = -ENODEV; + int ret; init_kmem_once(); -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF ret = of_register_platform_driver(&isp1760_of_driver); if (ret) { deinit_kmem_cache(); return ret; } #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI ret = pci_register_driver(&isp1761_pci_driver); if (ret) goto unreg_of; #endif return ret; -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI unreg_of: #endif -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif deinit_kmem_cache(); @@ -319,10 +319,10 @@ module_init(isp1760_init); static void __exit isp1760_exit(void) { -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI pci_unregister_driver(&isp1761_pci_driver); #endif deinit_kmem_cache(); -- cgit v1.2.3 From ed4103b3fcf38985995e732dab6c3e2b9693f6cb Mon Sep 17 00:00:00 2001 From: Ricky Wong Date: Tue, 4 Nov 2008 19:13:45 +0800 Subject: usb: unusual devs patch for Nokia 7610 Supernova Additional sectors were reported by the Nokia 7610 Supernova phone in usb storage mode. The following patch rectifies the aforementioned problem. Signed-off-by: Ricky Wong Yung Fei Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b2ec15208523..d4e5fc86e43c 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -253,6 +253,14 @@ UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Submitted by Ricky Wong Yung Fei */ +/* Nokia 7610 Supernova - Too many sectors reported in usb storage mode */ +UNUSUAL_DEV( 0x0421, 0x00f5, 0x0000, 0x0470, + "Nokia", + "7610 Supernova", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", -- cgit v1.2.3 From 859ff4072027ea7741121b902c59763f090e00c2 Mon Sep 17 00:00:00 2001 From: Albert Comerma Date: Tue, 4 Nov 2008 10:44:01 -0800 Subject: USB: SISUSB2VGA driver: add 0x0711, 0x0903 Signed-off-by: Albert Comerma Cc: Alan Cox Cc: David Brownell Cc: Mauro Carvalho Chehab Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/sisusbvga/sisusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 69c34a58e205..b4ec716de7da 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3270,6 +3270,7 @@ static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, { USB_DEVICE(0x0711, 0x0902) }, + { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, -- cgit v1.2.3 From d73b7aff28bc53c04e1f2e5ccaa5ea43089fb4a4 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Mon, 10 Nov 2008 21:11:11 -0700 Subject: ub: stub pre_reset and post_reset to fix oops Due to recent changes to usb_reset_device, the following hang occurs: events/0 D 0000000000000000 0 6 2 ffff880037477cc0 0000000000000046 ffff880037477c50 ffffffff80237434 ffffffff80574c80 00000001000a015c 0000000000000286 ffff8800374757d0 ffff88002a31c860 ffff880037475a00 0000000036779140 ffff880037475a00 Call Trace: [] try_to_del_timer_sync+0x52/0x5b [] dma_pool_free+0x1a7/0x1ec [] ub_disconnect+0x8e/0x1ad [ub] [] autoremove_wake_function+0x0/0x2e [] usb_unbind_interface+0x5c/0xb7 [] __device_release_driver+0x95/0xbd [] device_release_driver+0x21/0x2d [] usb_driver_release_interface+0x44/0x83 [] usb_forced_unbind_intf+0x17/0x1d [] usb_reset_device+0x7d/0x114 [] ub_reset_task+0x0/0x293 [ub] [] ub_reset_task+0x1c4/0x293 [ub] [] flush_to_ldisc+0x0/0x1cd [] ub_reset_task+0x0/0x293 [ub] [] run_workqueue+0x87/0x114 [] worker_thread+0xd8/0xe7 [] autoremove_wake_function+0x0/0x2e [] worker_thread+0x0/0xe7 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x60 [] child_rip+0xa/0x11 [] kthread+0x0/0x73 [] child_rip+0x0/0x11 This is because usb_reset_device now unbinds, and that calls disconnect, which in case of ub waits until the reset completes... which deadlocks. Worse, this deadlocks keventd and this takes whole box down. I'm going to fix this properly later, but let's unbreak the driver quickly for non-composite devices at least. Signed-off-by: Pete Zaitcev Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/block/ub.c b/drivers/block/ub.c index fccac18d3111..048d71d244d7 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1546,8 +1546,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) /* * Reset management - * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing. - * XXX Make usb_sync_reset asynchronous. */ static void ub_reset_enter(struct ub_dev *sc, int try) @@ -1632,6 +1630,22 @@ static void ub_reset_task(struct work_struct *work) spin_unlock_irqrestore(sc->lock, flags); } +/* + * XXX Reset brackets are too much hassle to implement, so just stub them + * in order to prevent forced unbinding (which deadlocks solid when our + * ->disconnect method waits for the reset to complete and this kills keventd). + * + * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device, + * or else the post_reset is invoked, and restats I/O on a locked device. + */ +static int ub_pre_reset(struct usb_interface *iface) { + return 0; +} + +static int ub_post_reset(struct usb_interface *iface) { + return 0; +} + /* * This is called from a process context. */ @@ -2446,6 +2460,8 @@ static struct usb_driver ub_driver = { .probe = ub_probe, .disconnect = ub_disconnect, .id_table = ub_usb_ids, + .pre_reset = ub_pre_reset, + .post_reset = ub_post_reset, }; static int __init ub_init(void) -- cgit v1.2.3 From 5863964608489f6dbf4b5f3118b45b3750a8274d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 16:47:21 +0900 Subject: usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB When I used SuperH on-chip USB, there was the problem that accessed r8a66597_root_hub which was not allocated. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/r8a66597-hcd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index c18d8790c410..2376f24f3c83 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1763,11 +1763,12 @@ static void r8a66597_timer(unsigned long _r8a66597) { struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597; unsigned long flags; + int port; spin_lock_irqsave(&r8a66597->lock, flags); - r8a66597_root_hub_control(r8a66597, 0); - r8a66597_root_hub_control(r8a66597, 1); + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + r8a66597_root_hub_control(r8a66597, port); spin_unlock_irqrestore(&r8a66597->lock, flags); } -- cgit v1.2.3 From 67b2e029743a52670d77864723b4d0d40f7733b5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 12 Nov 2008 17:04:53 -0500 Subject: USB: EHCI: fix handling of dead controllers This patch (as1165) makes a few small changes in the logic used by ehci-hcd when it encounters a controller error: Instead of printing out the masked status, it prints the original status as read directly from the hardware. It doesn't check for the STS_HALT status bit before taking action. The mere fact that the STS_FATAL bit is set means that something bad has happened and the controller needs to be reset. With the old code this test could never succeed because the STS_HALT bit was masked out from the status. I anticipate that this will prevent the occasional "irq X: nobody cared" problem people encounter when their EHCI controllers die. Signed-off-by: Alan Stern Cc: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 15a803b206b8..4725d15d096f 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -643,7 +643,7 @@ static int ehci_run (struct usb_hcd *hcd) static irqreturn_t ehci_irq (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 status, pcd_status = 0, cmd; + u32 status, masked_status, pcd_status = 0, cmd; int bh; spin_lock (&ehci->lock); @@ -656,14 +656,14 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) goto dead; } - status &= INTR_MASK; - if (!status) { /* irq sharing? */ + masked_status = status & INTR_MASK; + if (!masked_status) { /* irq sharing? */ spin_unlock(&ehci->lock); return IRQ_NONE; } /* clear (just) interrupts */ - ehci_writel(ehci, status, &ehci->regs->status); + ehci_writel(ehci, masked_status, &ehci->regs->status); cmd = ehci_readl(ehci, &ehci->regs->command); bh = 0; @@ -734,18 +734,17 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* PCI errors [4.15.2.4] */ if (unlikely ((status & STS_FATAL) != 0)) { + ehci_err(ehci, "fatal error\n"); dbg_cmd(ehci, "fatal", cmd); dbg_status(ehci, "fatal", status); - if (status & STS_HALT) { - ehci_err (ehci, "fatal error\n"); + ehci_halt(ehci); dead: - ehci_reset (ehci); - ehci_writel(ehci, 0, &ehci->regs->configured_flag); - /* generic layer kills/unlinks all urbs, then - * uses ehci_stop to clean up the rest - */ - bh = 1; - } + ehci_reset(ehci); + ehci_writel(ehci, 0, &ehci->regs->configured_flag); + /* generic layer kills/unlinks all urbs, then + * uses ehci_stop to clean up the rest + */ + bh = 1; } if (bh) -- cgit v1.2.3 From 372dd6e8ed924e876f3beb598721e813ad7fa323 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 12 Nov 2008 17:02:57 -0500 Subject: USB: EHCI: fix divide-by-zero bug This patch (as1164) fixes a bug in the EHCI scheduler. The interval value it uses is already in linear format, not logarithmically coded. The existing code can sometimes crash the system by trying to divide by zero. Signed-off-by: Alan Stern Cc: David Brownell Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 4a0c5a78b2ed..a081ee65bde6 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -918,7 +918,7 @@ iso_stream_init ( */ stream->usecs = HS_USECS_ISO (maxp); bandwidth = stream->usecs * 8; - bandwidth /= 1 << (interval - 1); + bandwidth /= interval; } else { u32 addr; @@ -951,7 +951,7 @@ iso_stream_init ( } else stream->raw_mask = smask_out [hs_transfers - 1]; bandwidth = stream->usecs + stream->c_usecs; - bandwidth /= 1 << (interval + 2); + bandwidth /= interval << 3; /* stream->splits gets created from raw_mask later */ stream->address = cpu_to_hc32(ehci, addr); -- cgit v1.2.3 From e50ae572b33646656fa7037541613834dcadedfb Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 12 Nov 2008 11:35:13 -0800 Subject: USB: gadget: cdc-acm deadlock fix This fixes a deadlock appearing with some USB peripheral drivers when running CDC ACM gadget code. The newish (2.6.27) CDC ACM event notification mechanism sends messages (IN to the host) which are short enough to fit in most FIFOs. That means that with some peripheral controller drivers (evidently not the ones used to verify the notification code!!) the completion callback can be issued before queue() returns. The deadlock would come because the completion callback and the event-issuing code shared a spinlock. Fix is trivial: drop that lock while queueing the message. Signed-off-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_acm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index 5ee1590b8e9c..c1d34df0b157 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -463,7 +463,11 @@ static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value, notify->wLength = cpu_to_le16(length); memcpy(buf, data, length); + /* ep_queue() can complete immediately if it fills the fifo... */ + spin_unlock(&acm->lock); status = usb_ep_queue(ep, req, GFP_ATOMIC); + spin_lock(&acm->lock); + if (status < 0) { ERROR(acm->port.func.config->cdev, "acm ttyGS%d can't notify serial state, %d\n", -- cgit v1.2.3 From ccf95402d0ae6f433f29ce88cfd589cec8fc81ad Mon Sep 17 00:00:00 2001 From: Jason Cooper Date: Tue, 11 Nov 2008 13:02:53 -0500 Subject: USB: net: asix: add support for Cables-to-Go USB Ethernet adapter Add support to drivers/net/usb/asix.c for the Cables-to-Go "USB 2.0 to 10/100 Ethernet Adapter". USB id 0b95:772a. Signed-off-by: Jason Cooper Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/asix.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 37ecf845edfe..e12cdb4543b4 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1444,6 +1444,10 @@ static const struct usb_device_id products [] = { // Apple USB Ethernet Adapter USB_DEVICE(0x05ac, 0x1402), .driver_info = (unsigned long) &ax88772_info, +}, { + // Cables-to-Go USB Ethernet Adapter + USB_DEVICE(0x0b95, 0x772a), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; -- cgit v1.2.3 From 18776c7316545482a02bfaa2629a2aa1afc48357 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 13 Nov 2008 23:38:52 +0000 Subject: dm raid1: flush workqueue before destruction We queue work on keventd queue --- so this queue must be flushed in the destructor. Otherwise, keventd could access mirror_set after it was freed. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon Cc: stable@kernel.org --- drivers/md/dm-raid1.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 9d7b53ed75b2..ec43f9fa4b2a 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1032,6 +1032,7 @@ static void mirror_dtr(struct dm_target *ti) del_timer_sync(&ms->timer); flush_workqueue(ms->kmirrord_wq); + flush_scheduled_work(); dm_kcopyd_client_destroy(ms->kcopyd_client); destroy_workqueue(ms->kmirrord_wq); free_context(ms, ti, ms->nr_mirrors); -- cgit v1.2.3 From 6edebdee48729ab4ba564bbfcb8dbf6a6cd68a39 Mon Sep 17 00:00:00 2001 From: Heinz Mauelshagen Date: Thu, 13 Nov 2008 23:38:56 +0000 Subject: dm stripe: fix init failure Don't proceed if dm_stripe_init() fails to register itself as a dm target. Signed-off-by: Heinz Mauelshagen Signed-off-by: Alasdair G Kergon --- drivers/md/dm-stripe.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index a2d068dbe9e2..9e4ef88d421e 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -320,8 +320,10 @@ int __init dm_stripe_init(void) int r; r = dm_register_target(&stripe_target); - if (r < 0) + if (r < 0) { DMWARN("target registration failed"); + return r; + } kstriped = create_singlethread_workqueue("kstriped"); if (!kstriped) { -- cgit v1.2.3 From b81aa1c79201cb424114fd198607951900babe18 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 13 Nov 2008 23:39:00 +0000 Subject: dm mpath: avoid attempting to activate null path Path activation code is called even when the pgpath is NULL. This could lead to a panic in activate_path(). Such a panic is seen in -rt kernel. This problem has been there before the pg_init() was moved to a workqueue. Signed-off-by: Chandra Seetharaman Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 4840733cd903..58b1015260fa 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -441,13 +441,13 @@ static void process_queued_ios(struct work_struct *work) __choose_pgpath(m); pgpath = m->current_pgpath; - m->pgpath_to_activate = m->current_pgpath; if ((pgpath && !m->queue_io) || (!pgpath && !m->queue_if_no_path)) must_queue = 0; - if (m->pg_init_required && !m->pg_init_in_progress) { + if (m->pg_init_required && !m->pg_init_in_progress && pgpath) { + m->pgpath_to_activate = pgpath; m->pg_init_count++; m->pg_init_required = 0; m->pg_init_in_progress = 1; -- cgit v1.2.3 From 14e98c5ca8bed825f65cbf11cb0ffd2c09dac2f4 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 13 Nov 2008 23:39:06 +0000 Subject: dm mpath: warn if args ignored Currently dm ignores the parameters provided to hardware handlers without providing any notifications to the user. This patch just prints a warning message so that the user knows that the arguments are ignored. Signed-off-by: Chandra Seetharaman Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 58b1015260fa..3d7f4923cd13 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -708,6 +708,10 @@ static int parse_hw_handler(struct arg_set *as, struct multipath *m) m->hw_handler_name = NULL; return -EINVAL; } + + if (hw_argc > 1) + DMWARN("Ignoring user-specified arguments for " + "hardware handler \"%s\"", m->hw_handler_name); consume(as, hw_argc - 1); return 0; -- cgit v1.2.3 From d221d2e77696e70e94b13989ea15db2ba5b34f8e Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 13 Nov 2008 23:39:10 +0000 Subject: dm: move pending queue wake_up end_io_acct This doesn't fix any bug, just moves wake_up immediately after decrementing md->pending, for better code readability. It must be clear to anyone manipulating md->pending to wake up the queue if md->pending reaches zero, so move the wakeup as close to the decrementing as possible. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 6963ad148408..dc25d8a07bc7 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -375,7 +375,7 @@ static void start_io_acct(struct dm_io *io) dm_disk(md)->part0.in_flight = atomic_inc_return(&md->pending); } -static int end_io_acct(struct dm_io *io) +static void end_io_acct(struct dm_io *io) { struct mapped_device *md = io->md; struct bio *bio = io->bio; @@ -391,7 +391,9 @@ static int end_io_acct(struct dm_io *io) dm_disk(md)->part0.in_flight = pending = atomic_dec_return(&md->pending); - return !pending; + /* nudge anyone waiting on suspend queue */ + if (!pending) + wake_up(&md->wait); } /* @@ -499,9 +501,7 @@ static void dec_pending(struct dm_io *io, int error) spin_unlock_irqrestore(&io->md->pushback_lock, flags); } - if (end_io_acct(io)) - /* nudge anyone waiting on suspend queue */ - wake_up(&io->md->wait); + end_io_acct(io); if (io->error != DM_ENDIO_REQUEUE) { blk_add_trace_bio(io->md->queue, io->bio, -- cgit v1.2.3 From 8a57dfc6f943c92b861c9a19b0c86ddcb2aba768 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 13 Nov 2008 23:39:14 +0000 Subject: dm: avoid destroying table in dm_any_congested dm_any_congested() just checks for the DMF_BLOCK_IO and has no code to make sure that suspend waits for dm_any_congested() to complete. This patch adds such a check. Without it, a race can occur with dm_table_put() attempting to destroying the table in the wrong thread, the one running dm_any_congested() which is meant to be quick and return immediately. Two examples of problems: 1. Sleeping functions called from congested code, the caller of which holds a spin lock. 2. An ABBA deadlock between pdflush and multipathd. The two locks in contention are inode lock and kernel lock. Signed-off-by: Chandra Seetharaman Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index dc25d8a07bc7..c99e4728ff41 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -937,16 +937,24 @@ static void dm_unplug_all(struct request_queue *q) static int dm_any_congested(void *congested_data, int bdi_bits) { - int r; - struct mapped_device *md = (struct mapped_device *) congested_data; - struct dm_table *map = dm_get_table(md); + int r = bdi_bits; + struct mapped_device *md = congested_data; + struct dm_table *map; - if (!map || test_bit(DMF_BLOCK_IO, &md->flags)) - r = bdi_bits; - else - r = dm_table_any_congested(map, bdi_bits); + atomic_inc(&md->pending); + + if (!test_bit(DMF_BLOCK_IO, &md->flags)) { + map = dm_get_table(md); + if (map) { + r = dm_table_any_congested(map, bdi_bits); + dm_table_put(map); + } + } + + if (!atomic_dec_return(&md->pending)) + /* nudge anyone waiting on suspend queue */ + wake_up(&md->wait); - dm_table_put(map); return r; } -- cgit v1.2.3 From 3ec332ef7a38c2327e18d087d4120a8e3bd3dc6e Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 14 Nov 2008 03:35:10 +0000 Subject: [CIFS] clean up server protocol handling We're currently declaring both a sockaddr_in and sockaddr6_in on the stack, but we really only need storage for one of them. Declare a sockaddr struct and cast it to the proper type. Also, eliminate the protocolType field in the TCP_Server_Info struct. It's redundant since we have a sa_family field in the sockaddr anyway. We may need to revisit this if SCTP is ever implemented, but for now this will simplify the code. CIFS over IPv6 also has a number of problems currently. This fixes all of them that I found. Eventually, it would be nice to move more of the code to be protocol independent, but this is a start. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_spnego.c | 4 ++-- fs/cifs/cifsglob.h | 3 +-- fs/cifs/connect.c | 57 +++++++++++++++++++++++++++------------------------ 3 files changed, 33 insertions(+), 31 deletions(-) diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index fcee9298b620..0ab2fb5afef1 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -73,8 +73,8 @@ struct key_type cifs_spnego_key_type = { * strlen(";sec=ntlmsspi") */ #define MAX_MECH_STR_LEN 13 -/* max possible addr len eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/60 */ -#define MAX_IPV6_ADDR_LEN 42 +/* max possible addr len eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/128 */ +#define MAX_IPV6_ADDR_LEN 43 /* strlen of "host=" */ #define HOST_KEY_LEN 5 diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index d6357dc1be72..13dc48414a78 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -85,8 +85,7 @@ enum securityEnum { }; enum protocolEnum { - IPV4 = 0, - IPV6, + TCP = 0, SCTP /* Netbios frames protocol not supported at this time */ }; diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index c1cd1217c990..30ab8dc68e17 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -193,7 +193,7 @@ cifs_reconnect(struct TCP_Server_Info *server) while ((server->tcpStatus != CifsExiting) && (server->tcpStatus != CifsGood)) { try_to_freeze(); - if (server->protocolType == IPV6) { + if (server->addr.sockAddr6.sin6_family == AF_INET6) { rc = ipv6_connect(&server->addr.sockAddr6, &server->ssocket, server->noautotune); } else { @@ -1983,10 +1983,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, { int rc = 0; int xid; - int address_type = AF_INET; struct socket *csocket = NULL; - struct sockaddr_in sin_server; - struct sockaddr_in6 sin_server6; + struct sockaddr addr; + struct sockaddr_in *sin_server = (struct sockaddr_in *) &addr; + struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr; struct smb_vol volume_info; struct cifsSesInfo *pSesInfo = NULL; struct cifsSesInfo *existingCifsSes = NULL; @@ -1997,6 +1997,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* cFYI(1, ("Entering cifs_mount. Xid: %d with: %s", xid, mount_data)); */ + memset(&addr, 0, sizeof(struct sockaddr)); memset(&volume_info, 0, sizeof(struct smb_vol)); if (cifs_parse_mount_options(mount_data, devname, &volume_info)) { rc = -EINVAL; @@ -2019,16 +2020,16 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (volume_info.UNCip && volume_info.UNC) { rc = cifs_inet_pton(AF_INET, volume_info.UNCip, - &sin_server.sin_addr.s_addr); + &sin_server->sin_addr.s_addr); if (rc <= 0) { /* not ipv4 address, try ipv6 */ rc = cifs_inet_pton(AF_INET6, volume_info.UNCip, - &sin_server6.sin6_addr.in6_u); + &sin_server6->sin6_addr.in6_u); if (rc > 0) - address_type = AF_INET6; + addr.sa_family = AF_INET6; } else { - address_type = AF_INET; + addr.sa_family = AF_INET; } if (rc <= 0) { @@ -2068,39 +2069,38 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } - if (address_type == AF_INET) - existingCifsSes = cifs_find_tcp_session(&sin_server.sin_addr, + if (addr.sa_family == AF_INET) + existingCifsSes = cifs_find_tcp_session(&sin_server->sin_addr, NULL /* no ipv6 addr */, volume_info.username, &srvTcp); - else if (address_type == AF_INET6) { + else if (addr.sa_family == AF_INET6) { cFYI(1, ("looking for ipv6 address")); existingCifsSes = cifs_find_tcp_session(NULL /* no ipv4 addr */, - &sin_server6.sin6_addr, + &sin_server6->sin6_addr, volume_info.username, &srvTcp); } else { rc = -EINVAL; goto out; } - if (!srvTcp) { /* create socket */ - if (volume_info.port) - sin_server.sin_port = htons(volume_info.port); - else - sin_server.sin_port = 0; - if (address_type == AF_INET6) { + if (!srvTcp) { + if (addr.sa_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ /* other OS never observed in Wild doing 139 with v6 */ - rc = ipv6_connect(&sin_server6, &csocket, + sin_server6->sin6_port = htons(volume_info.port); + rc = ipv6_connect(sin_server6, &csocket, volume_info.noblocksnd); - } else - rc = ipv4_connect(&sin_server, &csocket, + } else { + sin_server->sin_port = htons(volume_info.port); + rc = ipv4_connect(sin_server, &csocket, volume_info.source_rfc1001_name, volume_info.target_rfc1001_name, volume_info.noblocksnd, volume_info.noautotune); + } if (rc < 0) { - cERROR(1, ("Error connecting to IPv4 socket. " + cERROR(1, ("Error connecting to socket. " "Aborting operation")); if (csocket != NULL) sock_release(csocket); @@ -2115,12 +2115,15 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } else { srvTcp->noblocksnd = volume_info.noblocksnd; srvTcp->noautotune = volume_info.noautotune; - memcpy(&srvTcp->addr.sockAddr, &sin_server, - sizeof(struct sockaddr_in)); + if (addr.sa_family == AF_INET6) + memcpy(&srvTcp->addr.sockAddr6, sin_server6, + sizeof(struct sockaddr_in6)); + else + memcpy(&srvTcp->addr.sockAddr, sin_server, + sizeof(struct sockaddr_in)); atomic_set(&srvTcp->inFlight, 0); /* BB Add code for ipv6 case too */ srvTcp->ssocket = csocket; - srvTcp->protocolType = IPV4; srvTcp->hostname = extract_hostname(volume_info.UNC); if (IS_ERR(srvTcp->hostname)) { rc = PTR_ERR(srvTcp->hostname); @@ -2172,7 +2175,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, else { pSesInfo->server = srvTcp; sprintf(pSesInfo->serverName, "%u.%u.%u.%u", - NIPQUAD(sin_server.sin_addr.s_addr)); + NIPQUAD(sin_server->sin_addr.s_addr)); } if (!rc) { @@ -2211,7 +2214,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, setup_cifs_sb(&volume_info, cifs_sb); tcon = - find_unc(sin_server.sin_addr.s_addr, volume_info.UNC, + find_unc(sin_server->sin_addr.s_addr, volume_info.UNC, volume_info.username); if (tcon) { cFYI(1, ("Found match on UNC path")); -- cgit v1.2.3 From 847cdf42d589882aca683b6fb65b2c7832e92231 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 14 Nov 2008 05:19:00 -0700 Subject: powerpc/mpc5200: fix bestcomm Kconfig dependencies Without this patch it is possible to select drivers which require bestcomm support without bestcomm support being selected. This patch reworks the bestcomm dependencies to ensure the correct bestcomm tasks are always enabled. Reported-by: Hans Lehmann Signed-off-by: Grant Likely --- arch/powerpc/sysdev/bestcomm/Kconfig | 9 +++------ drivers/net/Kconfig | 3 ++- sound/soc/fsl/Kconfig | 3 ++- 3 files changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig index 57cc56562567..0b192a1c429d 100644 --- a/arch/powerpc/sysdev/bestcomm/Kconfig +++ b/arch/powerpc/sysdev/bestcomm/Kconfig @@ -17,23 +17,20 @@ config PPC_BESTCOMM answer Y or M. Otherwise say N. config PPC_BESTCOMM_ATA - tristate "Bestcomm ATA task support" + tristate depends on PPC_BESTCOMM - default n help This option enables the support for the ATA task. config PPC_BESTCOMM_FEC - tristate "Bestcomm FEC tasks support" + tristate depends on PPC_BESTCOMM - default n help This option enables the support for the FEC tasks. config PPC_BESTCOMM_GEN_BD - tristate "Bestcomm GenBD tasks support" + tristate depends on PPC_BESTCOMM - default n help This option enables the support for the GenBD tasks. diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 11f143f4adf6..231eeaf1d552 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1825,9 +1825,10 @@ config FEC2 config FEC_MPC52xx tristate "MPC52xx FEC driver" - depends on PPC_MPC52xx && PPC_BESTCOMM_FEC + depends on PPC_MPC52xx && PPC_BESTCOMM select CRC32 select PHYLIB + select PPC_BESTCOMM_FEC ---help--- This option enables support for the MPC5200's on-chip Fast Ethernet Controller diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index bba9546ba5f5..8d73edc56102 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -20,7 +20,8 @@ config SND_SOC_MPC8610_HPCD config SND_SOC_MPC5200_I2S tristate "Freescale MPC5200 PSC in I2S mode driver" + depends on SND_SOC && PPC_MPC52xx && PPC_BESTCOMM select SND_SOC_OF_SIMPLE - depends on SND_SOC && PPC_MPC52xx + select PPC_BESTCOMM_GEN_BD help Say Y here to support the MPC5200 PSCs in I2S mode. -- cgit v1.2.3 From e8f6fbf62de37cbc2e179176ac7010d5f4396b67 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 12 Nov 2008 01:38:36 +0000 Subject: lockdep: include/linux/lockdep.h - fix warning in net/bluetooth/af_bluetooth.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix this warning: net/bluetooth/af_bluetooth.c:60: warning: ‘bt_key_strings’ defined but not used net/bluetooth/af_bluetooth.c:71: warning: ‘bt_slock_key_strings’ defined but not used this is a lockdep macro problem in the !LOCKDEP case. We cannot convert it to an inline because the macro works on multiple types, but we can mark the parameter used. [ also clean up a misaligned tab in sock_lock_init_class_and_name() ] [ also remove #ifdefs from around af_family_clock_key strings - which were certainly added to get rid of the ugly build warnings. ] Signed-off-by: Ingo Molnar Signed-off-by: David S. Miller --- include/linux/lockdep.h | 5 +++-- include/net/sock.h | 2 +- net/core/sock.c | 2 -- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 331e5f1c2d8e..29aec6e10020 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -331,10 +331,11 @@ static inline void lockdep_on(void) # define lock_set_subclass(l, s, i) do { } while (0) # define lockdep_init() do { } while (0) # define lockdep_info() do { } while (0) -# define lockdep_init_map(lock, name, key, sub) do { (void)(key); } while (0) +# define lockdep_init_map(lock, name, key, sub) \ + do { (void)(name); (void)(key); } while (0) # define lockdep_set_class(lock, key) do { (void)(key); } while (0) # define lockdep_set_class_and_name(lock, key, name) \ - do { (void)(key); } while (0) + do { (void)(key); (void)(name); } while (0) #define lockdep_set_class_and_subclass(lock, key, sub) \ do { (void)(key); } while (0) #define lockdep_set_subclass(lock, sub) do { } while (0) diff --git a/include/net/sock.h b/include/net/sock.h index c04f9e18ea22..2f47107f6d0f 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -815,7 +815,7 @@ static inline void sk_wmem_free_skb(struct sock *sk, struct sk_buff *skb) */ #define sock_lock_init_class_and_name(sk, sname, skey, name, key) \ do { \ - sk->sk_lock.owned = 0; \ + sk->sk_lock.owned = 0; \ init_waitqueue_head(&sk->sk_lock.wq); \ spin_lock_init(&(sk)->sk_lock.slock); \ debug_check_no_locks_freed((void *)&(sk)->sk_lock, \ diff --git a/net/core/sock.c b/net/core/sock.c index 5e2a3132a8c9..341e39456952 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -136,7 +136,6 @@ static struct lock_class_key af_family_keys[AF_MAX]; static struct lock_class_key af_family_slock_keys[AF_MAX]; -#ifdef CONFIG_DEBUG_LOCK_ALLOC /* * Make lock validator output more readable. (we pre-construct these * strings build-time, so that runtime initialization of socket @@ -187,7 +186,6 @@ static const char *af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_RXRPC" , "clock-AF_ISDN" , "clock-AF_PHONET" , "clock-AF_MAX" }; -#endif /* * sk_callback_lock locking rules are per-address-family, -- cgit v1.2.3 From 131d3a7a009d56a96cc7117b4e9d0c90c2e2a1dc Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 14 Nov 2008 12:03:47 +0100 Subject: HID: don't grab devices with no input Some devices have no input interrupt endpoint. These won't be handled by usbhid, but currently they are not refused and reside on hid bus. Perform this checking earlier so that we refuse to control such a device early enough (and not pass it to the hid bus at all). Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index f0339aefc798..d746bf8284dd 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -849,12 +849,6 @@ static int usbhid_start(struct hid_device *hid) } } - if (!usbhid->urbin) { - err_hid("couldn't find an input interrupt endpoint"); - ret = -ENODEV; - goto fail; - } - init_waitqueue_head(&usbhid->wait); INIT_WORK(&usbhid->reset_work, hid_reset); setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid); @@ -948,15 +942,26 @@ static struct hid_ll_driver usb_hid_driver = { static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct usb_host_interface *interface = intf->cur_altsetting; struct usb_device *dev = interface_to_usbdev(intf); struct usbhid_device *usbhid; struct hid_device *hid; + unsigned int n, has_in = 0; size_t len; int ret; dbg_hid("HID probe called for ifnum %d\n", intf->altsetting->desc.bInterfaceNumber); + for (n = 0; n < interface->desc.bNumEndpoints; n++) + if (usb_endpoint_is_int_in(&interface->endpoint[n].desc)) + has_in++; + if (!has_in) { + dev_err(&intf->dev, "couldn't find an input interrupt " + "endpoint\n"); + return -ENODEV; + } + hid = hid_allocate_device(); if (IS_ERR(hid)) return PTR_ERR(hid); -- cgit v1.2.3 From 5c6533510335ab291dcc0e9cdb98e67b50f6b2e9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:06:33 -0300 Subject: V4L/DVB (9613): tvaudio: fix a memory leak Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index b59e47272abf..3332df890f0b 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1481,6 +1481,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) } if (desc->name == NULL) { v4l_dbg(1, debug, client, "no matching chip description found\n"); + kfree(chip); return -EIO; } v4l_info(client, "%s found @ 0x%x (%s)\n", desc->name, client->addr<<1, client->adapter->name); -- cgit v1.2.3 From 04e6f99025475a8cf2ccf2e39ffa48a6194a3b47 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:10:11 -0300 Subject: V4L/DVB (9615): tvaudio: instead of using a magic number, use ARRAY_SIZE Also, the default standard is the first one. So, fix the comment at the array. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 3332df890f0b..cb8bf6d6f3d5 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -777,7 +777,7 @@ static struct tda9874a_MODES { char *name; audiocmd cmd; } tda9874a_modelist[9] = { - { "A2, B/G", + { "A2, B/G", /* default */ { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} }, { "A2, M (Korea)", { 9, { TDA9874A_C1FRA, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} }, @@ -791,7 +791,7 @@ static struct tda9874a_MODES { { 9, { TDA9874A_C1FRA, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} }, { "NICAM, B/G", { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} }, - { "NICAM, D/K", /* default */ + { "NICAM, D/K", { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} }, { "NICAM, L", { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} } @@ -981,7 +981,7 @@ static int tda9874a_initialize(struct CHIPSTATE *chip) { if (tda9874a_SIF > 2) tda9874a_SIF = 1; - if (tda9874a_STD > 8) + if (tda9874a_STD >= ARRAY_SIZE(tda9874a_modelist)) tda9874a_STD = 0; if(tda9874a_AMSEL > 1) tda9874a_AMSEL = 0; -- cgit v1.2.3 From af1a9951fc5c89518c25c4d9f2c4b391b2e72b83 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:14:15 -0300 Subject: V4L/DVB (9616): tvaudio: cleanup - group all callbacks together Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index cb8bf6d6f3d5..1fa481ca0861 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1260,6 +1260,7 @@ static struct CHIPDESC chiplist[] = { .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 5, + /* callbacks */ .checkit = tda9840_checkit, .getmode = tda9840_getmode, .setmode = tda9840_setmode, @@ -1270,13 +1271,14 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tda9873h", - .checkit = tda9873_checkit, .insmodopt = &tda9873, .addr_lo = I2C_ADDR_TDA985x_L >> 1, .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 3, .flags = CHIP_HAS_INPUTSEL, + /* callbacks */ + .checkit = tda9873_checkit, .getmode = tda9873_getmode, .setmode = tda9873_setmode, .checkmode = generic_checkmode, @@ -1290,12 +1292,13 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tda9874h/a", - .checkit = tda9874a_checkit, - .initialize = tda9874a_initialize, .insmodopt = &tda9874a, .addr_lo = I2C_ADDR_TDA9874 >> 1, .addr_hi = I2C_ADDR_TDA9874 >> 1, + /* callbacks */ + .initialize = tda9874a_initialize, + .checkit = tda9874a_checkit, .getmode = tda9874a_getmode, .setmode = tda9874a_setmode, .checkmode = generic_checkmode, @@ -1324,10 +1327,11 @@ static struct CHIPDESC chiplist[] = { .rightreg = TDA9855_VR, .bassreg = TDA9855_BA, .treblereg = TDA9855_TR, + + /* callbacks */ .volfunc = tda9855_volume, .bassfunc = tda9855_bass, .treblefunc = tda9855_treble, - .getmode = tda985x_getmode, .setmode = tda985x_setmode, @@ -1348,6 +1352,8 @@ static struct CHIPDESC chiplist[] = { .rightreg = TEA6300_VL, .bassreg = TEA6300_BA, .treblereg = TEA6300_TR, + + /* callbacks */ .volfunc = tea6300_shift10, .bassfunc = tea6300_shift12, .treblefunc = tea6300_shift12, @@ -1358,7 +1364,6 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tea6320", - .initialize = tea6320_initialize, .insmodopt = &tea6320, .addr_lo = I2C_ADDR_TEA6300 >> 1, .addr_hi = I2C_ADDR_TEA6300 >> 1, @@ -1369,6 +1374,9 @@ static struct CHIPDESC chiplist[] = { .rightreg = TEA6320_V, .bassreg = TEA6320_BA, .treblereg = TEA6320_TR, + + /* callbacks */ + .initialize = tea6320_initialize, .volfunc = tea6320_volume, .bassfunc = tea6320_shift11, .treblefunc = tea6320_shift11, @@ -1401,16 +1409,18 @@ static struct CHIPDESC chiplist[] = { .rightreg = TDA8425_VR, .bassreg = TDA8425_BA, .treblereg = TDA8425_TR, + + /* callbacks */ + .initialize = tda8425_initialize, .volfunc = tda8425_shift10, .bassfunc = tda8425_shift12, .treblefunc = tda8425_shift12, + .setmode = tda8425_setmode, .inputreg = TDA8425_S1, .inputmap = { TDA8425_S1_CH1, TDA8425_S1_CH1, TDA8425_S1_CH1 }, .inputmute = TDA8425_S1_OFF, - .setmode = tda8425_setmode, - .initialize = tda8425_initialize, }, { .name = "pic16c54 (PV951)", @@ -1435,6 +1445,7 @@ static struct CHIPDESC chiplist[] = { .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 2, + /* callbacks */ .getmode = ta8874z_getmode, .setmode = ta8874z_setmode, .checkmode = generic_checkmode, -- cgit v1.2.3 From dd03e970a18f266faf120e47355349d224f64e3f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:55:39 -0300 Subject: V4L/DVB (9617): tvtime: remove generic_checkmode callback generic_checkmode() were called, via a callback, for some tvaudio chips. There's just one callback code used on all those boards. So, it makes no sense on keeping this as a callback. Since there were some OOPS reported on tvaudio on kerneloops.org, this patch removes this callback, adding the code at the only place were it is called: inside chip_tread. A flag were added to indicate the need for a kernel thread to set stereo mode on cards that needs it. Using this more direct approach simplifies the code, making it more robust against human errors. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 71 +++++++++++++++++++++---------------------- 1 file changed, 35 insertions(+), 36 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 1fa481ca0861..1387c54b7f02 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -58,7 +58,6 @@ typedef int (*checkit)(struct CHIPSTATE*); typedef int (*initialize)(struct CHIPSTATE*); typedef int (*getmode)(struct CHIPSTATE*); typedef void (*setmode)(struct CHIPSTATE*, int mode); -typedef void (*checkmode)(struct CHIPSTATE*); /* i2c command */ typedef struct AUDIOCMD { @@ -79,6 +78,7 @@ struct CHIPDESC { #define CHIP_HAS_VOLUME 1 #define CHIP_HAS_BASSTREBLE 2 #define CHIP_HAS_INPUTSEL 4 +#define CHIP_NEED_CHECKMODE 8 /* various i2c command sequences */ audiocmd init; @@ -96,9 +96,6 @@ struct CHIPDESC { getmode getmode; setmode setmode; - /* check / autoswitch audio after channel switches */ - checkmode checkmode; - /* input switch register + values for v4l inputs */ int inputreg; int inputmap[4]; @@ -264,6 +261,7 @@ static int chip_thread(void *data) { struct CHIPSTATE *chip = data; struct CHIPDESC *desc = chiplist + chip->type; + int mode; v4l_dbg(1, debug, chip->c, "%s: thread started\n", chip->c->name); set_freezable(); @@ -282,7 +280,26 @@ static int chip_thread(void *data) continue; /* have a look what's going on */ - desc->checkmode(chip); + mode = desc->getmode(chip); + if (mode == chip->prevmode) + continue; + + /* chip detected a new audio mode - set it */ + v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", + chip->c->name); + + chip->prevmode = mode; + + if (mode & V4L2_TUNER_MODE_STEREO) + desc->setmode(chip, V4L2_TUNER_MODE_STEREO); + if (mode & V4L2_TUNER_MODE_LANG1_LANG2) + desc->setmode(chip, V4L2_TUNER_MODE_STEREO); + else if (mode & V4L2_TUNER_MODE_LANG1) + desc->setmode(chip, V4L2_TUNER_MODE_LANG1); + else if (mode & V4L2_TUNER_MODE_LANG2) + desc->setmode(chip, V4L2_TUNER_MODE_LANG2); + else + desc->setmode(chip, V4L2_TUNER_MODE_MONO); /* schedule next check */ mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); @@ -292,29 +309,6 @@ static int chip_thread(void *data) return 0; } -static void generic_checkmode(struct CHIPSTATE *chip) -{ - struct CHIPDESC *desc = chiplist + chip->type; - int mode = desc->getmode(chip); - - if (mode == chip->prevmode) - return; - - v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", chip->c->name); - chip->prevmode = mode; - - if (mode & V4L2_TUNER_MODE_STEREO) - desc->setmode(chip,V4L2_TUNER_MODE_STEREO); - if (mode & V4L2_TUNER_MODE_LANG1_LANG2) - desc->setmode(chip,V4L2_TUNER_MODE_STEREO); - else if (mode & V4L2_TUNER_MODE_LANG1) - desc->setmode(chip,V4L2_TUNER_MODE_LANG1); - else if (mode & V4L2_TUNER_MODE_LANG2) - desc->setmode(chip,V4L2_TUNER_MODE_LANG2); - else - desc->setmode(chip,V4L2_TUNER_MODE_MONO); -} - /* ---------------------------------------------------------------------- */ /* audio chip descriptions - defines+functions for tda9840 */ @@ -1259,12 +1253,12 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA9840 >> 1, .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 5, + .flags = CHIP_NEED_CHECKMODE, /* callbacks */ .checkit = tda9840_checkit, .getmode = tda9840_getmode, .setmode = tda9840_setmode, - .checkmode = generic_checkmode, .init = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN /* ,TDA9840_SW, TDA9840_MONO */} } @@ -1275,13 +1269,12 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA985x_L >> 1, .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 3, - .flags = CHIP_HAS_INPUTSEL, + .flags = CHIP_HAS_INPUTSEL | CHIP_NEED_CHECKMODE, /* callbacks */ .checkit = tda9873_checkit, .getmode = tda9873_getmode, .setmode = tda9873_setmode, - .checkmode = generic_checkmode, .init = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } }, .inputreg = TDA9873_SW, @@ -1295,13 +1288,13 @@ static struct CHIPDESC chiplist[] = { .insmodopt = &tda9874a, .addr_lo = I2C_ADDR_TDA9874 >> 1, .addr_hi = I2C_ADDR_TDA9874 >> 1, + .flags = CHIP_NEED_CHECKMODE, /* callbacks */ .initialize = tda9874a_initialize, .checkit = tda9874a_checkit, .getmode = tda9874a_getmode, .setmode = tda9874a_setmode, - .checkmode = generic_checkmode, }, { .name = "tda9850", @@ -1444,11 +1437,11 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA9840 >> 1, .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 2, + .flags = CHIP_NEED_CHECKMODE, /* callbacks */ .getmode = ta8874z_getmode, .setmode = ta8874z_setmode, - .checkmode = generic_checkmode, .init = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}, }, @@ -1531,7 +1524,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) } chip->thread = NULL; - if (desc->checkmode) { + if (desc->flags & CHIP_NEED_CHECKMODE) { /* start async thread */ init_timer(&chip->wt); chip->wt.function = chip_thread_wake; @@ -1804,12 +1797,18 @@ static int chip_command(struct i2c_client *client, break; case VIDIOC_S_FREQUENCY: chip->mode = 0; /* automatic */ - if (desc->checkmode && desc->setmode) { + + /* For chips that provide getmode, setmode and checkmode, + a kthread is created to automatically to set the audio + standard. In this case, start with MONO and wait 2 seconds + for the decoding to stablize. Then, run kthread to change + to stereo, if carrier detected. + */ + if (chip->thread) { desc->setmode(chip,V4L2_TUNER_MODE_MONO); if (chip->prevmode != V4L2_TUNER_MODE_MONO) chip->prevmode = -1; /* reset previous mode */ mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); - /* the thread will call checkmode() later */ } break; -- cgit v1.2.3 From 099b7fcc770764ec06441066fddd90b97d868e11 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 14:01:15 -0300 Subject: V4L/DVB (9618): tvaudio: add additional logic to avoid OOPS This patch checks for volume, bass, treble, set mode and get mode callbacks before actually enabling the code that would use them. Instead of aborting the driver for load, this patch will allow it to load with a reduced number of functionatities. This prevents OOPS if some board entry is missing a needed callback. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 45 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 37 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 1387c54b7f02..6c920bf74973 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1511,20 +1511,49 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) chip_cmd(chip,"init",&desc->init); if (desc->flags & CHIP_HAS_VOLUME) { - chip->left = desc->leftinit ? desc->leftinit : 65535; - chip->right = desc->rightinit ? desc->rightinit : 65535; - chip_write(chip,desc->leftreg,desc->volfunc(chip->left)); - chip_write(chip,desc->rightreg,desc->volfunc(chip->right)); + if (!desc->volfunc) { + /* This shouldn't be happen. Warn user, but keep working + without volume controls + */ + v4l_info(chip->c, "volume callback undefined!\n"); + desc->flags &= ~CHIP_HAS_VOLUME; + } else { + chip->left = desc->leftinit ? desc->leftinit : 65535; + chip->right = desc->rightinit ? desc->rightinit : 65535; + chip_write(chip, desc->leftreg, + desc->volfunc(chip->left)); + chip_write(chip, desc->rightreg, + desc->volfunc(chip->right)); + } } if (desc->flags & CHIP_HAS_BASSTREBLE) { - chip->treble = desc->trebleinit ? desc->trebleinit : 32768; - chip->bass = desc->bassinit ? desc->bassinit : 32768; - chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); - chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); + if (!desc->bassfunc || !desc->treblefunc) { + /* This shouldn't be happen. Warn user, but keep working + without bass/treble controls + */ + v4l_info(chip->c, "bass/treble callbacks undefined!\n"); + desc->flags &= ~CHIP_HAS_BASSTREBLE; + } else { + chip->treble = desc->trebleinit ? + desc->trebleinit : 32768; + chip->bass = desc->bassinit ? + desc->bassinit : 32768; + chip_write(chip, desc->bassreg, + desc->bassfunc(chip->bass)); + chip_write(chip, desc->treblereg, + desc->treblefunc(chip->treble)); + } } chip->thread = NULL; if (desc->flags & CHIP_NEED_CHECKMODE) { + if (!desc->getmode || !desc->setmode) { + /* This shouldn't be happen. Warn user, but keep working + without kthread + */ + v4l_info(chip->c, "set/get mode callbacks undefined!\n"); + return 0; + } /* start async thread */ init_timer(&chip->wt); chip->wt.function = chip_thread_wake; -- cgit v1.2.3 From b4ab114cf750a49d91fc292439f8ef69a35a0fab Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 14:07:54 -0300 Subject: V4L/DVB (9619): tvaudio: update initial comments A driver used on several bttv boards since 2000 is not experimental anymore ;) Remove it from the comments. While there, update copyrights addind a quick note about the "recent" updates since 2005. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 6c920bf74973..ee6aca4ccd9f 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1,5 +1,5 @@ /* - * experimental driver for simple i2c audio chips. + * Driver for simple i2c audio chips. * * Copyright (c) 2000 Gerd Knorr * based on code by: @@ -7,6 +7,10 @@ * Steve VanDeBogart (vandebo@uclink.berkeley.edu) * Greg Alexander (galexand@acm.org) * + * Copyright(c) 2005-2008 Mauro Carvalho Chehab + * - Some cleanups, code fixes, etc + * - Convert it to V4L2 API + * * This code is placed under the terms of the GNU General Public License * * OPTIONS: -- cgit v1.2.3 From 81cb5c4f7fbe6971d9c61401bc47193290fd59b7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 16:22:53 -0300 Subject: V4L/DVB (9620): tvaudio: use a direct reference for chip description Instead of storing the pointer for the proper entry at chip description table, the driver were storing an indirect reference, by using an index. Better to reference directly the data. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index ee6aca4ccd9f..5ec369d54e6e 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -112,8 +112,9 @@ static struct CHIPDESC chiplist[]; struct CHIPSTATE { struct i2c_client *c; - /* index into CHIPDESC array */ - int type; + /* chip-specific description - should point to + an entry at CHIPDESC table */ + struct CHIPDESC *desc; /* shadow register set */ audiocmd shadow; @@ -264,7 +265,7 @@ static void chip_thread_wake(unsigned long data) static int chip_thread(void *data) { struct CHIPSTATE *chip = data; - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; int mode; v4l_dbg(1, debug, chip->c, "%s: thread started\n", chip->c->name); @@ -1087,7 +1088,7 @@ static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; } static int tda8425_initialize(struct CHIPSTATE *chip) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; int inputmap[4] = { /* tuner */ TDA8425_S1_CH2, /* radio */ TDA8425_S1_CH1, /* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF}; @@ -1503,7 +1504,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) /* fill required data structures */ if (!id) strlcpy(client->name, desc->name, I2C_NAME_SIZE); - chip->type = desc-chiplist; + chip->desc = desc; chip->shadow.count = desc->registers+1; chip->prevmode = -1; chip->audmode = V4L2_TUNER_MODE_LANG1; @@ -1590,7 +1591,7 @@ static int chip_remove(struct i2c_client *client) static int tvaudio_get_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -1630,7 +1631,7 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip, static int tvaudio_set_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -1706,7 +1707,7 @@ static int chip_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct CHIPSTATE *chip = i2c_get_clientdata(client); - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; v4l_dbg(1, debug, chip->c, "%s: chip_command 0x%x\n", chip->c->name, cmd); -- cgit v1.2.3 From 494264379d186bf806613d27aafb7d88d42f4212 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 17:03:28 -0300 Subject: V4L/DVB (9621): Avoid writing outside shadow.bytes[] array There were no check about the limits of shadow.bytes array. This offers a risk of writing values outside the limits, overriding other data areas. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 5ec369d54e6e..55b39b9a33d9 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -154,7 +154,7 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) { unsigned char buffer[2]; - if (-1 == subaddr) { + if (subaddr < 0) { v4l_dbg(1, debug, chip->c, "%s: chip_write: 0x%x\n", chip->c->name, val); chip->shadow.bytes[1] = val; @@ -165,6 +165,13 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) return -1; } } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + v4l_dbg(1, debug, chip->c, "%s: chip_write: reg%d=0x%x\n", chip->c->name, subaddr, val); chip->shadow.bytes[subaddr+1] = val; @@ -179,12 +186,20 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) return 0; } -static int chip_write_masked(struct CHIPSTATE *chip, int subaddr, int val, int mask) +static int chip_write_masked(struct CHIPSTATE *chip, + int subaddr, int val, int mask) { if (mask != 0) { - if (-1 == subaddr) { + if (subaddr < 0) { val = (chip->shadow.bytes[1] & ~mask) | (val & mask); } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + val = (chip->shadow.bytes[subaddr+1] & ~mask) | (val & mask); } } @@ -230,6 +245,15 @@ static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd) if (0 == cmd->count) return 0; + if (cmd->count + cmd->bytes[0] - 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register range: %d to %d\n", + cmd->bytes[0] + 1, cmd->bytes[0] + cmd->count - 1); + return -EINVAL; + } + + /* FIXME: it seems that the shadow bytes are wrong bellow !*/ + /* update our shadow register set; print bytes if (debug > 0) */ v4l_dbg(1, debug, chip->c, "%s: chip_cmd(%s): reg=%d, data:", chip->c->name, name,cmd->bytes[0]); -- cgit v1.2.3 From 41f5230f3fc6296d0d88ab9f4c3c07fcbbe53e59 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 17:25:04 -0300 Subject: V4L/DVB (9622): tvaudio: Improve comments and remove a unneeded prototype Some comments are not clear enough. Improve it to allow a better understanding of the driver behavior. While there, remove an unneeded struct prototype. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 55b39b9a33d9..779ce7f865c3 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -106,7 +106,6 @@ struct CHIPDESC { int inputmute; int inputmask; }; -static struct CHIPDESC chiplist[]; /* current state of the chip */ struct CHIPSTATE { @@ -1856,11 +1855,13 @@ static int chip_command(struct i2c_client *client, case VIDIOC_S_FREQUENCY: chip->mode = 0; /* automatic */ - /* For chips that provide getmode, setmode and checkmode, - a kthread is created to automatically to set the audio - standard. In this case, start with MONO and wait 2 seconds - for the decoding to stablize. Then, run kthread to change - to stereo, if carrier detected. + /* For chips that provide getmode and setmode, and doesn't + automatically follows the stereo carrier, a kthread is + created to set the audio standard. In this case, when then + the video channel is changed, tvaudio starts on MONO mode. + After waiting for 2 seconds, the kernel thread is called, + to follow whatever audio standard is pointed by the + audio carrier. */ if (chip->thread) { desc->setmode(chip,V4L2_TUNER_MODE_MONO); @@ -1905,9 +1906,3 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .legacy_probe = chip_legacy_probe, .id_table = chip_id, }; - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ -- cgit v1.2.3 From c6241b6c64dbe759e0eccaee913bdcf4d7960367 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 18:12:43 -0300 Subject: V4L/DVB (9623): tvaudio: Improve debug msg by printing something more human Before the patch, the used ioctl were printed as an hexadecimal code, hard to be understand without consulting the way _IO macros work. Instead, use the V4L default handler for printing such errors into a way that would be easier to understand. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 779ce7f865c3..fb46ce4a1090 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -34,6 +34,7 @@ #include #include +#include #include #include @@ -1732,7 +1733,10 @@ static int chip_command(struct i2c_client *client, struct CHIPSTATE *chip = i2c_get_clientdata(client); struct CHIPDESC *desc = chip->desc; - v4l_dbg(1, debug, chip->c, "%s: chip_command 0x%x\n", chip->c->name, cmd); + if (debug > 0) { + v4l_i2c_print_ioctl(chip->c, cmd); + printk("\n"); + } switch (cmd) { case AUDC_SET_RADIO: -- cgit v1.2.3 From 01a1a3cc1e3fbe718bd06a2a5d4d1a2d0fb4d7d9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Nov 2008 10:46:59 -0300 Subject: V4L/DVB (9624): CVE-2008-5033: fix OOPS on tvaudio when controlling bass/treble This bug were supposed to be fixed by 5ba2f67afb02c5302b2898949ed6fc3b3d37dcf1, where a call to NULL happens. Not all tvaudio chips allow controlling bass/treble. So, the driver has a table with a flag to indicate if the chip does support it. Unfortunately, the handling of this logic were broken for a very long time (probably since the first module version). Due to that, an OOPS were generated for devices that don't support bass/treble. This were the resulting OOPS message before the patch, with debug messages enabled: tvaudio' 1-005b: VIDIOC_S_CTRL BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<00000000>] *pde = 22fda067 *pte = 00000000 Oops: 0000 [#1] SMP Modules linked in: snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_hwdep snd soundcore tuner_simple tuner_types tea5767 tuner tvaudio bttv bridgebnep rfcomm l2cap bluetooth it87 hwmon_vid hwmon fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 dm_mirrordm_multipath dm_mod configfs videodev v4l1_compat ir_common 8139cp compat_ioctl32 v4l2_common 8139too videobuf_dma_sg videobuf_core mii btcx_risc tveeprom i915 button snd_page_alloc serio_raw drm pcspkr i2c_algo_bit i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support sr_mod cdrom sg ata_generic pata_acpi ata_piix libata sd_mod scsi_mod ext3 jbdmbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: soundcore] Pid: 15413, comm: qv4l2 Not tainted (2.6.25.14-108.fc9.i686 #1) EIP: 0060:[<00000000>] EFLAGS: 00210246 CPU: 0 EIP is at 0x0 EAX: 00008000 EBX: ebd21600 ECX: e2fd9ec4 EDX: 00200046 ESI: f8c0f0c4 EDI: f8c0f0c4 EBP: e2fd9d50 ESP: e2fd9d2c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process qv4l2 (pid: 15413, ti=e2fd9000 task=ebe44000 task.ti=e2fd9000) Stack: f8c0c6ae e2ff2a00 00000d00 e2fd9ec4 ebc4e000 e2fd9d5c f8c0c448 00000000 f899c12a e2fd9d5c f899c154 e2fd9d68 e2fd9d80 c0560185 e2fd9d88 f8f3e1d8 f8f3e1dc ebc4e034 f8f3e18c e2fd9ec4 00000000 e2fd9d90 f899c286 c008561c Call Trace: [] ? chip_command+0x266/0x4b6 [tvaudio] [] ? chip_command+0x0/0x4b6 [tvaudio] [] ? i2c_cmd+0x0/0x2f [i2c_core] [] ? i2c_cmd+0x2a/0x2f [i2c_core] [] ? device_for_each_child+0x21/0x49 [] ? i2c_clients_command+0x1c/0x1e [i2c_core] [] ? bttv_call_i2c_clients+0x14/0x16 [bttv] [] ? bttv_s_ctrl+0x1bc/0x313 [bttv] [] ? bttv_s_ctrl+0x0/0x313 [bttv] [] ? __video_do_ioctl+0x1f84/0x3726 [videodev] [] ? sock_aio_write+0x100/0x10d [] ? kmap_atomic_prot+0x1dd/0x1df [] ? enqueue_hrtimer+0xc2/0xcd [] ? copy_from_user+0x39/0x121 [] ? __video_ioctl2+0x1aa/0x24a [videodev] [] ? do_notify_resume+0x768/0x795 [] ? getnstimeofday+0x34/0xd1 [] ? autoremove_wake_function+0x0/0x33 [] ? video_ioctl2+0xf/0x13 [videodev] [] ? vfs_ioctl+0x50/0x69 [] ? do_vfs_ioctl+0x239/0x24c [] ? sys_ioctl+0x40/0x5b [] ? syscall_call+0x7/0xb [] ? cpuid4_cache_sysfs_exit+0x3d/0x69 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:e2fd9d2c Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index fb46ce4a1090..3720f0e03a16 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1639,13 +1639,13 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip, return 0; } case V4L2_CID_AUDIO_BASS: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) break; ctrl->value = chip->bass; return 0; case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) - return -EINVAL; + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; ctrl->value = chip->treble; return 0; } @@ -1705,16 +1705,15 @@ static int tvaudio_set_ctrl(struct CHIPSTATE *chip, return 0; } case V4L2_CID_AUDIO_BASS: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) break; chip->bass = ctrl->value; chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); return 0; case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) - return -EINVAL; - + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; chip->treble = ctrl->value; chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); @@ -1761,7 +1760,7 @@ static int chip_command(struct i2c_client *client, break; case V4L2_CID_AUDIO_BASS: case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) return -EINVAL; break; default: -- cgit v1.2.3 From a108096878aa6cb744b5280ca59395b6c0152d14 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 14 Nov 2008 09:59:48 -0700 Subject: powerpc/virtex: fix various format/casting printk mismatches Various printk format string in code used by the Xilinx Virtex platform are not 32-bit/64-bit safe. Add correct casting to fix the bugs. Reported-by: Josh Boyer Signed-off-by: Grant Likely Acked-by: Josh Boyer --- arch/powerpc/sysdev/xilinx_intc.c | 4 ++-- drivers/block/xsysace.c | 4 ++-- drivers/char/xilinx_hwicap/xilinx_hwicap.c | 9 +++++---- drivers/serial/uartlite.c | 4 ++-- drivers/video/xilinxfb.c | 5 +++-- 5 files changed, 14 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c index b7aefd0d45cb..a22e1a2df1af 100644 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -107,8 +107,8 @@ xilinx_intc_init(struct device_node *np) } regs = ioremap(res.start, 32); - printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n", - res.start, regs); + printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n", + (unsigned long long) res.start, regs); /* Setup interrupt controller */ out_be32(regs + XINTC_IER, 0); /* disable all irqs */ diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index ecab9e67d47a..e28fc3abf0b6 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -628,8 +628,8 @@ static void ace_fsm_dostate(struct ace_device *ace) /* Okay, it's a data request, set it up for transfer */ dev_dbg(ace->dev, - "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n", - req->sector, req->hard_nr_sectors, + "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n", + (unsigned long long) req->sector, req->hard_nr_sectors, req->current_nr_sectors, rq_data_dir(req)); ace->req = req; diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index ed132fe55d3d..d16131949097 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -626,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, if (!request_mem_region(drvdata->mem_start, drvdata->mem_size, DRIVER_NAME)) { dev_err(dev, "Couldn't lock memory region at %Lx\n", - regs_res->start); + (unsigned long long) regs_res->start); retval = -EBUSY; goto failed1; } @@ -645,9 +645,10 @@ static int __devinit hwicap_setup(struct device *dev, int id, mutex_init(&drvdata->sem); drvdata->is_open = 0; - dev_info(dev, "ioremap %lx to %p with size %Lx\n", - (unsigned long int)drvdata->mem_start, - drvdata->base_address, drvdata->mem_size); + dev_info(dev, "ioremap %llx to %p with size %llx\n", + (unsigned long long) drvdata->mem_start, + drvdata->base_address, + (unsigned long long) drvdata->mem_size); cdev_init(&drvdata->cdev, &hwicap_fops); drvdata->cdev.owner = THIS_MODULE; diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index 6a3f8fb0c9dd..3317148a4b93 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -286,8 +286,8 @@ static void ulite_release_port(struct uart_port *port) static int ulite_request_port(struct uart_port *port) { - pr_debug("ulite console: port=%p; port->mapbase=%x\n", - port, port->mapbase); + pr_debug("ulite console: port=%p; port->mapbase=%llx\n", + port, (unsigned long long) port->mapbase); if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) { dev_err(port->dev, "Memory region busy\n"); diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c index 5da3d2423cc0..40a3a2afbfe7 100644 --- a/drivers/video/xilinxfb.c +++ b/drivers/video/xilinxfb.c @@ -298,8 +298,9 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr, /* Put a banner in the log (for DEBUG) */ dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs); - dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n", - (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize); + dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n", + (unsigned long long) drvdata->fb_phys, drvdata->fb_virt, + fbsize); return 0; /* success */ -- cgit v1.2.3 From fb2e7c5e33b341699f139b2ed972dca0a463a670 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 14 Nov 2008 18:18:00 +0100 Subject: [S390] Fix range for add_active_range() in setup_memory() add_active_range() expects start_pfn + size as end_pfn value, i.e. not the pfn of the last page frame but the one behind that. We used the pfn of the last page frame so far, which can lead to a BUG_ON in move_freepages(), when the kernelcore parameter is specified (page_zone(start_page) != page_zone(end_page)). Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 62122bad1e33..400b040df7fa 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -604,13 +604,13 @@ setup_memory(void) if (memory_chunk[i].type != CHUNK_READ_WRITE) continue; start_chunk = PFN_DOWN(memory_chunk[i].addr); - end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size) - 1; + end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size); end_chunk = min(end_chunk, end_pfn); if (start_chunk >= end_chunk) continue; add_active_range(0, start_chunk, end_chunk); pfn = max(start_chunk, start_pfn); - for (; pfn <= end_chunk; pfn++) + for (; pfn < end_chunk; pfn++) page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY); } -- cgit v1.2.3 From 675be97a32a5f12650b86391b7431f1e10811f1e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:01 +0100 Subject: [S390] sclp: emit error message if assign storage fails Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_cmd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index eb5f1b8bc57f..ec9c0bcf66ee 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -324,6 +324,9 @@ static int do_assign_storage(sclp_cmdw_t cmd, u16 rn) case 0x0120: break; default: + pr_warning("assign storage failed (cmd=0x%08x, " + "response=0x%04x, rn=0x%04x)\n", cmd, + sccb->header.response_code, rn); rc = -EIO; break; } -- cgit v1.2.3 From cc835f7872adef35076e4a3b6632ef79bb4805be Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Fri, 14 Nov 2008 18:18:02 +0100 Subject: [S390] kvm_s390: Fix oops in virtio device detection with "mem=" The current virtio model on s390 has the descriptor page above the main memory. The guest virtio detection will oops if the mem= parameter is used to reduce/change the memory size. We have to use real_memory_size instead of max_pfn to detect the virtio descriptor pages. Signed-off-by: Christian Borntraeger --- drivers/s390/kvm/kvm_virtio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index ff4a6931bb8e..3d442444c618 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -322,13 +322,13 @@ static int __init kvm_devices_init(void) return rc; } - rc = vmem_add_mapping(PFN_PHYS(max_pfn), PAGE_SIZE); + rc = vmem_add_mapping(real_memory_size, PAGE_SIZE); if (rc) { s390_root_dev_unregister(kvm_root); return rc; } - kvm_devices = (void *) PFN_PHYS(max_pfn); + kvm_devices = (void *) real_memory_size; ctl_set_bit(0, 9); register_external_interrupt(0x2603, kvm_extint_handler); -- cgit v1.2.3 From af4c68740e848019d8d14c52704ed8eacceddac6 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:03 +0100 Subject: [S390] lockdep: fix compile bug arch/s390/kernel/built-in.o: In function `cleanup_io_leave_insn': mem_detect.c:(.text+0x10592): undefined reference to `lockdep_sys_exit' Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index ed500ef799b7..5f0c4fba87c3 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -1116,6 +1116,8 @@ cleanup_io_leave_insn: .Ltrace_irq_on: .long trace_hardirqs_on .Ltrace_irq_off: .long trace_hardirqs_off +#endif +#ifdef CONFIG_LOCKDEP .Llockdep_sys_exit: .long lockdep_sys_exit #endif -- cgit v1.2.3 From 632448f65001c4935ed0d3bb362017d773da2eca Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:04 +0100 Subject: [S390] ftrace: disable tracing on idle psw Disable tracing on idle psw. Otherwise it would give us huge preempt off times for idle. Which is rather pointless. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/process.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 3e2c05cb6a87..04f8c67a6101 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -136,9 +136,12 @@ static void default_idle(void) return; } trace_hardirqs_on(); + /* Don't trace preempt off for idle. */ + stop_critical_timings(); /* Wait for external, I/O or machine check interrupt. */ __load_psw_mask(psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_IO | PSW_MASK_EXT); + start_critical_timings(); } void cpu_idle(void) -- cgit v1.2.3 From 50bec4ce5d36ebf96189dcc54e20c7fce4bf61bf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:05 +0100 Subject: [S390] ftrace: fix kernel stack backchain walking With CONFIG_IRQSOFF_TRACER the trace_hardirqs_off() function includes a call to __builtin_return_address(1). But we calltrace_hardirqs_off() from early entry code. There we have just a single stack frame. So this results in a kernel stack backchain walk that would walk beyond the kernel stack. Following the NULL terminated backchain this results in a lowcore read access. To fix this we simply call trace_hardirqs_off_caller() and pass the current instruction pointer. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 18 +++++++++++------- arch/s390/kernel/entry64.S | 11 +++++++---- 2 files changed, 18 insertions(+), 11 deletions(-) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 5f0c4fba87c3..08844fc24a2e 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -61,22 +61,25 @@ STACK_SIZE = 1 << STACK_SHIFT #ifdef CONFIG_TRACE_IRQFLAGS .macro TRACE_IRQS_ON - l %r1,BASED(.Ltrace_irq_on) + basr %r2,%r0 + l %r1,BASED(.Ltrace_irq_on_caller) basr %r14,%r1 .endm .macro TRACE_IRQS_OFF - l %r1,BASED(.Ltrace_irq_off) + basr %r2,%r0 + l %r1,BASED(.Ltrace_irq_off_caller) basr %r14,%r1 .endm .macro TRACE_IRQS_CHECK + basr %r2,%r0 tm SP_PSW(%r15),0x03 # irqs enabled? jz 0f - l %r1,BASED(.Ltrace_irq_on) + l %r1,BASED(.Ltrace_irq_on_caller) basr %r14,%r1 j 1f -0: l %r1,BASED(.Ltrace_irq_off) +0: l %r1,BASED(.Ltrace_irq_off_caller) basr %r14,%r1 1: .endm @@ -1113,9 +1116,10 @@ cleanup_io_leave_insn: .Lschedtail: .long schedule_tail .Lsysc_table: .long sys_call_table #ifdef CONFIG_TRACE_IRQFLAGS -.Ltrace_irq_on: .long trace_hardirqs_on -.Ltrace_irq_off: - .long trace_hardirqs_off +.Ltrace_irq_on_caller: + .long trace_hardirqs_on_caller +.Ltrace_irq_off_caller: + .long trace_hardirqs_off_caller #endif #ifdef CONFIG_LOCKDEP .Llockdep_sys_exit: diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index d7ce150453f2..41aca06682aa 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -61,19 +61,22 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ #ifdef CONFIG_TRACE_IRQFLAGS .macro TRACE_IRQS_ON - brasl %r14,trace_hardirqs_on + basr %r2,%r0 + brasl %r14,trace_hardirqs_on_caller .endm .macro TRACE_IRQS_OFF - brasl %r14,trace_hardirqs_off + basr %r2,%r0 + brasl %r14,trace_hardirqs_off_caller .endm .macro TRACE_IRQS_CHECK + basr %r2,%r0 tm SP_PSW(%r15),0x03 # irqs enabled? jz 0f - brasl %r14,trace_hardirqs_on + brasl %r14,trace_hardirqs_on_caller j 1f -0: brasl %r14,trace_hardirqs_off +0: brasl %r14,trace_hardirqs_off_caller 1: .endm #else -- cgit v1.2.3 From 85acc407bf1c49fb40b8f461c2c7526af736d87e Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 14 Nov 2008 18:18:06 +0100 Subject: [S390] cio: Fix refcount after moving devices. In ccw_device_move_to_orphanage(), a replacing ccw_device is searched via get_{disc,orphaned}_ccwdev_by_dev_id() which obtain a reference on the returned ccw_device. This reference must be given up again after the device has been moved to its new parent. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 4e78c82194b4..4e4008325e28 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -874,11 +874,15 @@ void ccw_device_move_to_orphanage(struct work_struct *work) replacing_cdev = get_disc_ccwdev_by_dev_id(&dev_id, cdev); if (replacing_cdev) { sch_attach_disconnected_device(sch, replacing_cdev); + /* Release reference from get_disc_ccwdev_by_dev_id() */ + put_device(&cdev->dev); return; } replacing_cdev = get_orphaned_ccwdev_by_dev_id(css, &dev_id); if (replacing_cdev) { sch_attach_orphaned_device(sch, replacing_cdev); + /* Release reference from get_orphaned_ccwdev_by_dev_id() */ + put_device(&cdev->dev); return; } sch_create_and_recog_new_device(sch); -- cgit v1.2.3 From 74af283102b358b0da545460d0d176f473e110f6 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:07 +0100 Subject: [S390] cpu topology: fix locking cpu_coregroup_map used to grab a mutex on s390 since it was only called from process context. Since c7c22e4d5c1fdebfac4dba76de7d0338c2b0d832 "block: add support for IO CPU affinity" this is not true anymore. It now also gets called from softirq context. To prevent possible deadlocks change this in architecture code and use a spinlock instead of a mutex. Cc: stable@kernel.org Cc: Jens Axboe Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/topology.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 632b13e10053..a947899dcba1 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -65,18 +65,21 @@ static int machine_has_topology_irq; static struct timer_list topology_timer; static void set_topology_timer(void); static DECLARE_WORK(topology_work, topology_work_fn); +/* topology_lock protects the core linked list */ +static DEFINE_SPINLOCK(topology_lock); cpumask_t cpu_core_map[NR_CPUS]; cpumask_t cpu_coregroup_map(unsigned int cpu) { struct core_info *core = &core_info; + unsigned long flags; cpumask_t mask; cpus_clear(mask); if (!machine_has_topology) return cpu_present_map; - mutex_lock(&smp_cpu_state_mutex); + spin_lock_irqsave(&topology_lock, flags); while (core) { if (cpu_isset(cpu, core->mask)) { mask = core->mask; @@ -84,7 +87,7 @@ cpumask_t cpu_coregroup_map(unsigned int cpu) } core = core->next; } - mutex_unlock(&smp_cpu_state_mutex); + spin_unlock_irqrestore(&topology_lock, flags); if (cpus_empty(mask)) mask = cpumask_of_cpu(cpu); return mask; @@ -133,7 +136,7 @@ static void tl_to_cores(struct tl_info *info) union tl_entry *tle, *end; struct core_info *core = &core_info; - mutex_lock(&smp_cpu_state_mutex); + spin_lock_irq(&topology_lock); clear_cores(); tle = info->tle; end = (union tl_entry *)((unsigned long)info + info->length); @@ -157,7 +160,7 @@ static void tl_to_cores(struct tl_info *info) } tle = next_tle(tle); } - mutex_unlock(&smp_cpu_state_mutex); + spin_unlock_irq(&topology_lock); } static void topology_update_polarization_simple(void) -- cgit v1.2.3 From a9cffb227d59db526286cc9f84bf258e68a97470 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Fri, 14 Nov 2008 18:18:08 +0100 Subject: [S390] dasd: log sense for fatal errors The logging of sense data for fatal errors was accidentally removed during Hyper PAV implementation. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4b76fca64a6f..363bd1303d21 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1746,6 +1746,11 @@ restart: goto restart; } + /* log sense for fatal error */ + if (cqr->status == DASD_CQR_FAILED) { + dasd_log_sense(cqr, &cqr->irb); + } + /* First of all call extended error reporting. */ if (dasd_eer_enabled(base) && cqr->status == DASD_CQR_FAILED) { -- cgit v1.2.3 From d2f019fe40e8fecd822f87bc759f74925a5c31d6 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Nov 2008 18:18:09 +0100 Subject: [S390] fix s390x_newuname The uname system call for 64 bit compares current->personality without masking the upper 16 bits. If e.g. READ_IMPLIES_EXEC is set the result of a uname system call will always be s390x even if the process uses the s390 personality. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/sys_s390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c index 5fdb799062b7..4fe952e557ac 100644 --- a/arch/s390/kernel/sys_s390.c +++ b/arch/s390/kernel/sys_s390.c @@ -198,7 +198,7 @@ asmlinkage long s390x_newuname(struct new_utsname __user *name) { int ret = sys_newuname(name); - if (current->personality == PER_LINUX32 && !ret) { + if (personality(current->personality) == PER_LINUX32 && !ret) { ret = copy_to_user(name->machine, "s390\0\0\0\0", 8); if (ret) ret = -EFAULT; } -- cgit v1.2.3 From c14464bf796d5ead1e735225ead78c566d3344ae Mon Sep 17 00:00:00 2001 From: Yuri Tikhonov Date: Fri, 14 Nov 2008 10:21:57 -0700 Subject: xsysace: Fix driver to use resource_size_t instead of unsigned long This patch is a bug fix to the SystemACE driver to use resource_size_t for physical address instead of unsigned long. This makes the driver work correctly on 32 bit systems with 64-bit resources (e.g. PowerPC 440). Signed-off-by: Yuri Tikhonov Signed-off-by: Ilya Yanok Signed-off-by: Grant Likely --- drivers/block/xsysace.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index e28fc3abf0b6..29e1dfafb7c6 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -194,7 +194,7 @@ struct ace_device { int in_irq; /* Details of hardware device */ - unsigned long physaddr; + resource_size_t physaddr; void __iomem *baseaddr; int irq; int bus_width; /* 0 := 8 bit; 1 := 16 bit */ @@ -935,7 +935,8 @@ static int __devinit ace_setup(struct ace_device *ace) int rc; dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace); - dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq); + dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n", + (unsigned long long)ace->physaddr, ace->irq); spin_lock_init(&ace->lock); init_completion(&ace->id_completion); @@ -1017,8 +1018,8 @@ static int __devinit ace_setup(struct ace_device *ace) /* Print the identification */ dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n", (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff); - dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n", - ace->physaddr, ace->baseaddr, ace->irq); + dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n", + (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq); ace->media_change = 1; ace_revalidate_disk(ace->gd); @@ -1035,8 +1036,8 @@ err_alloc_disk: err_blk_initq: iounmap(ace->baseaddr); err_ioremap: - dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n", - ace->physaddr); + dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n", + (unsigned long long) ace->physaddr); return -ENOMEM; } @@ -1059,7 +1060,7 @@ static void __devexit ace_teardown(struct ace_device *ace) } static int __devinit -ace_alloc(struct device *dev, int id, unsigned long physaddr, +ace_alloc(struct device *dev, int id, resource_size_t physaddr, int irq, int bus_width) { struct ace_device *ace; @@ -1119,7 +1120,7 @@ static void __devexit ace_free(struct device *dev) static int __devinit ace_probe(struct platform_device *dev) { - unsigned long physaddr = 0; + resource_size_t physaddr = 0; int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */ int id = dev->id; int irq = NO_IRQ; @@ -1165,7 +1166,7 @@ static int __devinit ace_of_probe(struct of_device *op, const struct of_device_id *match) { struct resource res; - unsigned long physaddr; + resource_size_t physaddr; const u32 *id; int irq, bus_width, rc; -- cgit v1.2.3 From c7c2ffb4fb92ad79e842226aa547adb5bd045b86 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 14 Nov 2008 10:22:02 -0700 Subject: powerpc/52xx: update defconfigs Signed-off-by: Grant Likely --- arch/powerpc/configs/52xx/cm5200_defconfig | 169 ++++++-- arch/powerpc/configs/52xx/lite5200b_defconfig | 206 ++++++--- arch/powerpc/configs/52xx/motionpro_defconfig | 168 ++++++-- arch/powerpc/configs/52xx/pcm030_defconfig | 182 +++++--- arch/powerpc/configs/52xx/tqm5200_defconfig | 180 ++++++-- arch/powerpc/configs/mpc5200_defconfig | 573 ++++++++++++++++++++------ 6 files changed, 1117 insertions(+), 361 deletions(-) diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index c10f7395aa1b..3df627494b65 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Tue Apr 29 07:11:37 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:12:40 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -102,6 +103,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -110,9 +112,13 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -123,6 +129,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -137,19 +144,16 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set @@ -159,7 +163,10 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -183,7 +190,6 @@ CONFIG_PPC_BESTCOMM_FEC=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -197,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -211,19 +219,20 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -233,7 +242,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set @@ -254,10 +263,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -308,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -328,14 +334,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -446,6 +446,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -487,11 +488,11 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -521,6 +522,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y @@ -532,7 +536,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # @@ -567,6 +570,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -596,25 +600,40 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -623,10 +642,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -640,24 +662,39 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -672,10 +709,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -695,11 +728,16 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -710,12 +748,16 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -744,7 +786,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -757,7 +798,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -773,14 +814,19 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -792,12 +838,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -830,6 +877,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -860,6 +908,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -870,14 +919,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -953,9 +1002,9 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -982,9 +1031,12 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -998,16 +1050,37 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -1018,14 +1091,19 @@ CONFIG_SCHED_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1063,6 +1141,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1093,6 +1175,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index 1a8a250fa11b..5b969f9c925e 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Tue Apr 29 07:12:56 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:10:16 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -103,7 +104,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -111,24 +114,30 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -143,19 +152,16 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set @@ -165,7 +171,10 @@ CONFIG_PPC_LITE5200=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -198,11 +207,13 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -217,19 +228,20 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y @@ -243,7 +255,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -269,10 +281,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -323,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -343,14 +352,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -390,12 +393,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -412,7 +419,7 @@ CONFIG_SCSI_DMA=y # # SCSI support type (disk, tape, CD-ROM) # -# CONFIG_BLK_DEV_SD is not set +CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set @@ -474,12 +481,12 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -535,18 +542,22 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -583,16 +594,19 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -605,22 +619,27 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -628,7 +647,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -657,6 +675,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -691,42 +710,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -735,29 +775,47 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -774,10 +832,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -787,18 +841,26 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -810,12 +872,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -845,6 +908,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -864,6 +928,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -874,14 +939,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -902,9 +967,9 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -929,9 +994,12 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -945,17 +1013,37 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -966,14 +1054,19 @@ CONFIG_DEBUG_INFO=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1012,6 +1105,10 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1042,6 +1139,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index 8c7ba7c6ba49..3c0d4e561726 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Tue Apr 29 07:12:22 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:11:02 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -102,6 +103,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -110,9 +112,13 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -123,6 +129,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -137,19 +144,16 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set @@ -159,7 +163,10 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -183,7 +190,6 @@ CONFIG_PPC_BESTCOMM_FEC=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -197,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -211,19 +219,20 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -233,7 +242,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set @@ -254,10 +263,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -308,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -328,14 +334,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -445,9 +445,12 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -490,10 +493,10 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y -# CONFIG_SATA_FSL is not set CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set CONFIG_PATA_MPC52xx=y @@ -501,7 +504,6 @@ CONFIG_PATA_MPC52xx=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -531,6 +533,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y @@ -542,7 +547,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set @@ -568,6 +572,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -596,24 +601,39 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -622,10 +642,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -633,6 +656,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set @@ -675,6 +699,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -683,24 +708,39 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_MPC5200_WDT is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -715,10 +755,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -729,6 +765,7 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -736,7 +773,9 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -767,6 +806,8 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -776,19 +817,25 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -800,12 +847,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -838,6 +886,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -868,6 +917,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -878,14 +928,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -961,9 +1011,9 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -990,9 +1040,12 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1006,16 +1059,37 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -1026,14 +1100,19 @@ CONFIG_DEBUG_INFO=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1071,6 +1150,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1101,6 +1184,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 9c0caa488b2e..9d0207783d60 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Tue Apr 29 07:13:19 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:13:16 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -104,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -112,24 +115,30 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -144,19 +153,16 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set @@ -166,7 +172,10 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -199,12 +208,14 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -219,17 +230,19 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -240,7 +253,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -265,10 +278,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -313,6 +322,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -333,14 +343,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -484,12 +488,12 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -545,18 +549,22 @@ CONFIG_PATA_MPC52xx=m # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -593,10 +601,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -606,7 +618,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # @@ -644,6 +655,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -675,43 +687,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -720,29 +753,47 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -759,10 +810,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -781,12 +828,17 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_PPC_SOC is not set CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -799,12 +851,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -833,7 +890,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -846,7 +902,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -862,10 +918,14 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=m @@ -894,6 +954,8 @@ CONFIG_RTC_DRV_PCF8563=m # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -903,19 +965,25 @@ CONFIG_RTC_DRV_PCF8563=m # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -927,12 +995,13 @@ CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=m CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -964,6 +1033,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -994,6 +1064,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1004,13 +1075,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1070,9 +1141,9 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1098,7 +1169,17 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1108,6 +1189,7 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 7672bfba3566..bc190051e8d5 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Tue Apr 29 07:12:39 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:09:30 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -102,6 +103,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -110,14 +112,19 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -128,6 +135,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,19 +150,16 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set @@ -164,7 +169,10 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -188,7 +196,6 @@ CONFIG_PPC_BESTCOMM_FEC=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -202,6 +209,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -216,19 +225,20 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -238,7 +248,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set @@ -259,10 +269,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -313,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -333,14 +340,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -451,6 +452,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -495,10 +497,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y -# CONFIG_SATA_FSL is not set CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set CONFIG_PATA_MPC52xx=y @@ -507,7 +509,6 @@ CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -537,6 +538,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y @@ -548,7 +552,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # @@ -583,6 +586,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -611,26 +615,41 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -639,10 +658,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -650,6 +672,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set @@ -692,6 +715,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -705,24 +729,39 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -737,10 +776,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -760,11 +795,16 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -775,12 +815,16 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -809,7 +853,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -822,7 +865,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -838,10 +881,13 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -872,6 +918,8 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -881,19 +929,25 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -905,12 +959,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -943,6 +998,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -973,6 +1029,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -983,14 +1040,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1066,9 +1123,9 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1095,9 +1152,12 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1111,17 +1171,37 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -1132,14 +1212,19 @@ CONFIG_DEBUG_INFO=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1178,6 +1263,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1208,6 +1297,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 740c9f2b7de6..15c5604d0b26 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Fri Jan 18 14:19:54 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:09:07 2008 # # CONFIG_PPC64 is not set @@ -22,14 +22,18 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -47,7 +51,8 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -66,17 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -88,32 +91,49 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -127,29 +147,34 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y -CONFIG_PPC_MPC5200=y -CONFIG_PPC_MPC5200_BUGFIX=y CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_EFIKA=y CONFIG_PPC_LITE5200=y +CONFIG_PPC_MPC5200_BUGFIX=y +# CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set CONFIG_PPC_NATIVE=y # CONFIG_UDBG_RTAS_CONSOLE is not set +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -163,7 +188,6 @@ CONFIG_RTAS_PROC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y @@ -183,12 +207,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -198,26 +228,25 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y -CONFIG_HIBERNATION_UP_POSSIBLE=y -# CONFIG_HIBERNATION is not set +CONFIG_SUSPEND_FREEZER=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -226,7 +255,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -237,6 +266,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,15 +276,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# CONFIG_NET=y # @@ -267,6 +293,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -297,8 +324,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -306,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -322,17 +348,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -357,6 +378,8 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -428,6 +451,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -444,14 +468,20 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -516,6 +546,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -528,9 +559,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -540,7 +575,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -570,6 +604,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -586,25 +621,28 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y # CONFIG_PATA_OF_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -620,6 +658,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -634,10 +673,14 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -647,6 +690,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -662,7 +706,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -672,7 +715,30 @@ CONFIG_FEC_MPC52xx_MDIO=y # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Hardware I/O ports @@ -683,8 +749,14 @@ CONFIG_FEC_MPC52xx_MDIO=y # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -718,16 +790,15 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set @@ -735,52 +806,64 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -788,7 +871,9 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -818,6 +903,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -827,9 +913,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -837,6 +926,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set # CONFIG_MPC5200_WDT is not set # CONFIG_WATCHDOG_RTAS is not set @@ -850,23 +940,39 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -874,11 +980,78 @@ CONFIG_DAB=y # Graphics support # # CONFIG_AGP is not set -# CONFIG_DRM is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +CONFIG_FB_MACMODES=y +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set # # Display device support @@ -886,15 +1059,64 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_DISPLAY_SUPPORT is not set # -# Sound -# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +# CONFIG_HID_APPLE is not set +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +# CONFIG_HID_CHICONY is not set +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -903,14 +1125,20 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -923,12 +1151,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -948,7 +1181,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -956,15 +1191,10 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -973,7 +1203,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -989,18 +1219,14 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS is not set # # LED drivers @@ -1009,17 +1235,15 @@ CONFIG_LEDS_CLASS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1031,21 +1255,19 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1072,6 +1294,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1101,8 +1324,11 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1110,15 +1336,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1173,7 +1398,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1181,6 +1405,7 @@ CONFIG_NLS_ISO8859_1=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1191,7 +1416,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1199,6 +1424,7 @@ CONFIG_HAS_DMA=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1206,10 +1432,14 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1220,17 +1450,39 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1240,47 +1492,98 @@ CONFIG_FORCED_INLINING=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3 From 31c00fc15ebd35c1647775dbfc167a15d46657fd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 13 Nov 2008 21:33:24 +0000 Subject: Create/use more directory structure in the Documentation/ tree. Create Documentation/blockdev/ sub-directory and populate it. Populate the Documentation/serial/ sub-directory. Move MSI-HOWTO.txt to Documentation/PCI/. Move ioctl-number.txt to Documentation/ioctl/. Update all relevant 00-INDEX files. Update all relevant Kconfig files and source files. Signed-off-by: Randy Dunlap --- Documentation/00-INDEX | 42 +- Documentation/MSI-HOWTO.txt | 509 ----------------------- Documentation/PCI/00-INDEX | 2 + Documentation/PCI/MSI-HOWTO.txt | 509 +++++++++++++++++++++++ Documentation/README.DAC960 | 756 ---------------------------------- Documentation/README.cycladesZ | 8 - Documentation/blockdev/00-INDEX | 16 + Documentation/blockdev/README.DAC960 | 756 ++++++++++++++++++++++++++++++++++ Documentation/blockdev/cciss.txt | 171 ++++++++ Documentation/blockdev/cpqarray.txt | 93 +++++ Documentation/blockdev/floppy.txt | 245 +++++++++++ Documentation/blockdev/nbd.txt | 47 +++ Documentation/blockdev/paride.txt | 417 +++++++++++++++++++ Documentation/blockdev/ramdisk.txt | 165 ++++++++ Documentation/cciss.txt | 171 -------- Documentation/computone.txt | 522 ----------------------- Documentation/cpqarray.txt | 93 ----- Documentation/digiepca.txt | 98 ----- Documentation/floppy.txt | 245 ----------- Documentation/hayes-esp.txt | 154 ------- Documentation/ioctl-number.txt | 201 --------- Documentation/ioctl/00-INDEX | 10 + Documentation/ioctl/ioctl-number.txt | 201 +++++++++ Documentation/kernel-parameters.txt | 24 +- Documentation/moxa-smartio | 523 ----------------------- Documentation/nbd.txt | 47 --- Documentation/paride.txt | 417 ------------------- Documentation/ramdisk.txt | 165 -------- Documentation/riscom8.txt | 36 -- Documentation/rocket.txt | 189 --------- Documentation/serial/00-INDEX | 24 ++ Documentation/serial/README.cycladesZ | 8 + Documentation/serial/computone.txt | 522 +++++++++++++++++++++++ Documentation/serial/digiepca.txt | 98 +++++ Documentation/serial/hayes-esp.txt | 154 +++++++ Documentation/serial/moxa-smartio | 523 +++++++++++++++++++++++ Documentation/serial/riscom8.txt | 36 ++ Documentation/serial/rocket.txt | 189 +++++++++ Documentation/serial/specialix.txt | 383 +++++++++++++++++ Documentation/serial/stallion.txt | 392 ++++++++++++++++++ Documentation/serial/sx.txt | 294 +++++++++++++ Documentation/serial/tty.txt | 292 +++++++++++++ Documentation/specialix.txt | 383 ----------------- Documentation/stallion.txt | 392 ------------------ Documentation/sx.txt | 294 ------------- Documentation/tty.txt | 292 ------------- drivers/block/Kconfig | 29 +- drivers/block/floppy.c | 2 +- drivers/char/Kconfig | 24 +- drivers/char/specialix.c | 2 +- 50 files changed, 5590 insertions(+), 5575 deletions(-) delete mode 100644 Documentation/MSI-HOWTO.txt create mode 100644 Documentation/PCI/MSI-HOWTO.txt delete mode 100644 Documentation/README.DAC960 delete mode 100644 Documentation/README.cycladesZ create mode 100644 Documentation/blockdev/00-INDEX create mode 100644 Documentation/blockdev/README.DAC960 create mode 100644 Documentation/blockdev/cciss.txt create mode 100644 Documentation/blockdev/cpqarray.txt create mode 100644 Documentation/blockdev/floppy.txt create mode 100644 Documentation/blockdev/nbd.txt create mode 100644 Documentation/blockdev/paride.txt create mode 100644 Documentation/blockdev/ramdisk.txt delete mode 100644 Documentation/cciss.txt delete mode 100644 Documentation/computone.txt delete mode 100644 Documentation/cpqarray.txt delete mode 100644 Documentation/digiepca.txt delete mode 100644 Documentation/floppy.txt delete mode 100644 Documentation/hayes-esp.txt delete mode 100644 Documentation/ioctl-number.txt create mode 100644 Documentation/ioctl/00-INDEX create mode 100644 Documentation/ioctl/ioctl-number.txt delete mode 100644 Documentation/moxa-smartio delete mode 100644 Documentation/nbd.txt delete mode 100644 Documentation/paride.txt delete mode 100644 Documentation/ramdisk.txt delete mode 100644 Documentation/riscom8.txt delete mode 100644 Documentation/rocket.txt create mode 100644 Documentation/serial/00-INDEX create mode 100644 Documentation/serial/README.cycladesZ create mode 100644 Documentation/serial/computone.txt create mode 100644 Documentation/serial/digiepca.txt create mode 100644 Documentation/serial/hayes-esp.txt create mode 100644 Documentation/serial/moxa-smartio create mode 100644 Documentation/serial/riscom8.txt create mode 100644 Documentation/serial/rocket.txt create mode 100644 Documentation/serial/specialix.txt create mode 100644 Documentation/serial/stallion.txt create mode 100644 Documentation/serial/sx.txt create mode 100644 Documentation/serial/tty.txt delete mode 100644 Documentation/specialix.txt delete mode 100644 Documentation/stallion.txt delete mode 100644 Documentation/sx.txt delete mode 100644 Documentation/tty.txt diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index edef85ce1195..2f969e2bece1 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -42,14 +42,8 @@ IRQ.txt - description of what an IRQ is. ManagementStyle - how to (attempt to) manage kernel hackers. -MSI-HOWTO.txt - - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ. RCU/ - directory with info on RCU (read-copy update). -README.DAC960 - - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux. -README.cycladesZ - - info on Cyclades-Z firmware loading. SAK.txt - info on Secure Attention Keys. SM501.txt @@ -86,20 +80,16 @@ blackfin/ - directory with documentation for the Blackfin arch. block/ - info on the Block I/O (BIO) layer. +blockdev/ + - info on block devices & drivers cachetlb.txt - describes the cache/TLB flushing interfaces Linux uses. -cciss.txt - - info, major/minor #'s for Compaq's SMART Array Controllers. cdrom/ - directory with information on the CD-ROM drivers that Linux has. -computone.txt - - info on Computone Intelliport II/Plus Multiport Serial Driver. connector/ - docs on the netlink based userspace<->kernel space communication mod. console/ - documentation on Linux console drivers. -cpqarray.txt - - info on using Compaq's SMART2 Intelligent Disk Array Controllers. cpu-freq/ - info on CPU frequency and voltage scaling. cpu-hotplug.txt @@ -126,8 +116,6 @@ device-mapper/ - directory with info on Device Mapper. devices.txt - plain ASCII listing of all the nodes in /dev/ with major minor #'s. -digiepca.txt - - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. dontdiff - file containing a list of files that should never be diff'ed. driver-model/ @@ -152,14 +140,10 @@ filesystems/ - info on the vfs and the various filesystems that Linux supports. firmware_class/ - request_firmware() hotplug interface info. -floppy.txt - - notes and driver options for the floppy disk driver. frv/ - Fujitsu FR-V Linux documentation. gpio.txt - overview of GPIO (General Purpose Input/Output) access conventions. -hayes-esp.txt - - info on using the Hayes ESP serial driver. highuid.txt - notes on the change from 16 bit to 32 bit user/group IDs. timers/ @@ -186,8 +170,6 @@ io_ordering.txt - info on ordering I/O writes to memory-mapped addresses. ioctl/ - directory with documents describing various IOCTL calls. -ioctl-number.txt - - how to implement and register device/driver ioctl calls. iostats.txt - info on I/O statistics Linux kernel provides. irqflags-tracing.txt @@ -250,14 +232,10 @@ mips/ - directory with info about Linux on MIPS architecture. mono.txt - how to execute Mono-based .NET binaries with the help of BINFMT_MISC. -moxa-smartio - - file with info on installing/using Moxa multiport serial driver. mutex-design.txt - info on the generic mutex subsystem. namespaces/ - directory with various information about namespaces -nbd.txt - - info on a TCP implementation of a network block device. netlabel/ - directory with information on the NetLabel subsystem. networking/ @@ -270,8 +248,6 @@ numastat.txt - info on how to read Numa policy hit/miss statistics in sysfs. oops-tracing.txt - how to decode those nasty internal kernel error dump messages. -paride.txt - - information about the parallel port IDE subsystem. parisc/ - directory with info on using Linux on PA-RISC architecture. parport.txt @@ -292,18 +268,12 @@ preempt-locking.txt - info on locking under a preemptive kernel. prio_tree.txt - info on radix-priority-search-tree use for indexing vmas. -ramdisk.txt - - short guide on how to set up and use the RAM disk. rbtree.txt - info on what red-black trees are and what they are for. -riscom8.txt - - notes on using the RISCom/8 multi-port serial driver. robust-futex-ABI.txt - documentation of the robust futex ABI. robust-futexes.txt - a description of what robust futexes are. -rocket.txt - - info on the Comtrol RocketPort multiport serial driver. rt-mutex-design.txt - description of the RealTime mutex implementation design. rt-mutex.txt @@ -332,8 +302,6 @@ sparc/ - directory with info on using Linux on Sparc architecture. sparse.txt - info on how to obtain and use the sparse tool for typechecking. -specialix.txt - - info on hardware/driver for specialix IO8+ multiport serial card. spi/ - overview of Linux kernel Serial Peripheral Interface (SPI) support. spinlocks.txt @@ -342,14 +310,10 @@ stable_api_nonsense.txt - info on why the kernel does not have a stable in-kernel api or abi. stable_kernel_rules.txt - rules and procedures for the -stable kernel releases. -stallion.txt - - info on using the Stallion multiport serial driver. svga.txt - short guide on selecting video modes at boot via VGA BIOS. sysfs-rules.txt - How not to use sysfs. -sx.txt - - info on the Specialix SX/SI multiport serial driver. sysctl/ - directory with info on the /proc/sys/* files. sysrq.txt @@ -358,8 +322,6 @@ telephony/ - directory with info on telephony (e.g. voice over IP) support. time_interpolators.txt - info on time interpolators. -tty.txt - - guide to the locking policies of the tty layer. uml/ - directory with information about User Mode Linux. unicode.txt diff --git a/Documentation/MSI-HOWTO.txt b/Documentation/MSI-HOWTO.txt deleted file mode 100644 index 256defd7e174..000000000000 --- a/Documentation/MSI-HOWTO.txt +++ /dev/null @@ -1,509 +0,0 @@ - The MSI Driver Guide HOWTO - Tom L Nguyen tom.l.nguyen@intel.com - 10/03/2003 - Revised Feb 12, 2004 by Martine Silbermann - email: Martine.Silbermann@hp.com - Revised Jun 25, 2004 by Tom L Nguyen - -1. About this guide - -This guide describes the basics of Message Signaled Interrupts (MSI), -the advantages of using MSI over traditional interrupt mechanisms, -and how to enable your driver to use MSI or MSI-X. Also included is -a Frequently Asked Questions (FAQ) section. - -1.1 Terminology - -PCI devices can be single-function or multi-function. In either case, -when this text talks about enabling or disabling MSI on a "device -function," it is referring to one specific PCI device and function and -not to all functions on a PCI device (unless the PCI device has only -one function). - -2. Copyright 2003 Intel Corporation - -3. What is MSI/MSI-X? - -Message Signaled Interrupt (MSI), as described in the PCI Local Bus -Specification Revision 2.3 or later, is an optional feature, and a -required feature for PCI Express devices. MSI enables a device function -to request service by sending an Inbound Memory Write on its PCI bus to -the FSB as a Message Signal Interrupt transaction. Because MSI is -generated in the form of a Memory Write, all transaction conditions, -such as a Retry, Master-Abort, Target-Abort or normal completion, are -supported. - -A PCI device that supports MSI must also support pin IRQ assertion -interrupt mechanism to provide backward compatibility for systems that -do not support MSI. In systems which support MSI, the bus driver is -responsible for initializing the message address and message data of -the device function's MSI/MSI-X capability structure during device -initial configuration. - -An MSI capable device function indicates MSI support by implementing -the MSI/MSI-X capability structure in its PCI capability list. The -device function may implement both the MSI capability structure and -the MSI-X capability structure; however, the bus driver should not -enable both. - -The MSI capability structure contains Message Control register, -Message Address register and Message Data register. These registers -provide the bus driver control over MSI. The Message Control register -indicates the MSI capability supported by the device. The Message -Address register specifies the target address and the Message Data -register specifies the characteristics of the message. To request -service, the device function writes the content of the Message Data -register to the target address. The device and its software driver -are prohibited from writing to these registers. - -The MSI-X capability structure is an optional extension to MSI. It -uses an independent and separate capability structure. There are -some key advantages to implementing the MSI-X capability structure -over the MSI capability structure as described below. - - - Support a larger maximum number of vectors per function. - - - Provide the ability for system software to configure - each vector with an independent message address and message - data, specified by a table that resides in Memory Space. - - - MSI and MSI-X both support per-vector masking. Per-vector - masking is an optional extension of MSI but a required - feature for MSI-X. Per-vector masking provides the kernel the - ability to mask/unmask a single MSI while running its - interrupt service routine. If per-vector masking is - not supported, then the device driver should provide the - hardware/software synchronization to ensure that the device - generates MSI when the driver wants it to do so. - -4. Why use MSI? - -As a benefit to the simplification of board design, MSI allows board -designers to remove out-of-band interrupt routing. MSI is another -step towards a legacy-free environment. - -Due to increasing pressure on chipset and processor packages to -reduce pin count, the need for interrupt pins is expected to -diminish over time. Devices, due to pin constraints, may implement -messages to increase performance. - -PCI Express endpoints uses INTx emulation (in-band messages) instead -of IRQ pin assertion. Using INTx emulation requires interrupt -sharing among devices connected to the same node (PCI bridge) while -MSI is unique (non-shared) and does not require BIOS configuration -support. As a result, the PCI Express technology requires MSI -support for better interrupt performance. - -Using MSI enables the device functions to support two or more -vectors, which can be configured to target different CPUs to -increase scalability. - -5. Configuring a driver to use MSI/MSI-X - -By default, the kernel will not enable MSI/MSI-X on all devices that -support this capability. The CONFIG_PCI_MSI kernel option -must be selected to enable MSI/MSI-X support. - -5.1 Including MSI/MSI-X support into the kernel - -To allow MSI/MSI-X capable device drivers to selectively enable -MSI/MSI-X (using pci_enable_msi()/pci_enable_msix() as described -below), the VECTOR based scheme needs to be enabled by setting -CONFIG_PCI_MSI during kernel config. - -Since the target of the inbound message is the local APIC, providing -CONFIG_X86_LOCAL_APIC must be enabled as well as CONFIG_PCI_MSI. - -5.2 Configuring for MSI support - -Due to the non-contiguous fashion in vector assignment of the -existing Linux kernel, this version does not support multiple -messages regardless of a device function is capable of supporting -more than one vector. To enable MSI on a device function's MSI -capability structure requires a device driver to call the function -pci_enable_msi() explicitly. - -5.2.1 API pci_enable_msi - -int pci_enable_msi(struct pci_dev *dev) - -With this new API, a device driver that wants to have MSI -enabled on its device function must call this API to enable MSI. -A successful call will initialize the MSI capability structure -with ONE vector, regardless of whether a device function is -capable of supporting multiple messages. This vector replaces the -pre-assigned dev->irq with a new MSI vector. To avoid a conflict -of the new assigned vector with existing pre-assigned vector requires -a device driver to call this API before calling request_irq(). - -5.2.2 API pci_disable_msi - -void pci_disable_msi(struct pci_dev *dev) - -This API should always be used to undo the effect of pci_enable_msi() -when a device driver is unloading. This API restores dev->irq with -the pre-assigned IOAPIC vector and switches a device's interrupt -mode to PCI pin-irq assertion/INTx emulation mode. - -Note that a device driver should always call free_irq() on the MSI vector -that it has done request_irq() on before calling this API. Failure to do -so results in a BUG_ON() and a device will be left with MSI enabled and -leaks its vector. - -5.2.3 MSI mode vs. legacy mode diagram - -The below diagram shows the events which switch the interrupt -mode on the MSI-capable device function between MSI mode and -PIN-IRQ assertion mode. - - ------------ pci_enable_msi ------------------------ - | | <=============== | | - | MSI MODE | | PIN-IRQ ASSERTION MODE | - | | ===============> | | - ------------ pci_disable_msi ------------------------ - - -Figure 1. MSI Mode vs. Legacy Mode - -In Figure 1, a device operates by default in legacy mode. Legacy -in this context means PCI pin-irq assertion or PCI-Express INTx -emulation. A successful MSI request (using pci_enable_msi()) switches -a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector -stored in dev->irq will be saved by the PCI subsystem and a new -assigned MSI vector will replace dev->irq. - -To return back to its default mode, a device driver should always call -pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a -device driver should always call free_irq() on the MSI vector it has -done request_irq() on before calling pci_disable_msi(). Failure to do -so results in a BUG_ON() and a device will be left with MSI enabled and -leaks its vector. Otherwise, the PCI subsystem restores a device's -dev->irq with a pre-assigned IOAPIC vector and marks the released -MSI vector as unused. - -Once being marked as unused, there is no guarantee that the PCI -subsystem will reserve this MSI vector for a device. Depending on -the availability of current PCI vector resources and the number of -MSI/MSI-X requests from other drivers, this MSI may be re-assigned. - -For the case where the PCI subsystem re-assigns this MSI vector to -another driver, a request to switch back to MSI mode may result -in being assigned a different MSI vector or a failure if no more -vectors are available. - -5.3 Configuring for MSI-X support - -Due to the ability of the system software to configure each vector of -the MSI-X capability structure with an independent message address -and message data, the non-contiguous fashion in vector assignment of -the existing Linux kernel has no impact on supporting multiple -messages on an MSI-X capable device functions. To enable MSI-X on -a device function's MSI-X capability structure requires its device -driver to call the function pci_enable_msix() explicitly. - -The function pci_enable_msix(), once invoked, enables either -all or nothing, depending on the current availability of PCI vector -resources. If the PCI vector resources are available for the number -of vectors requested by a device driver, this function will configure -the MSI-X table of the MSI-X capability structure of a device with -requested messages. To emphasize this reason, for example, a device -may be capable for supporting the maximum of 32 vectors while its -software driver usually may request 4 vectors. It is recommended -that the device driver should call this function once during the -initialization phase of the device driver. - -Unlike the function pci_enable_msi(), the function pci_enable_msix() -does not replace the pre-assigned IOAPIC dev->irq with a new MSI -vector because the PCI subsystem writes the 1:1 vector-to-entry mapping -into the field vector of each element contained in a second argument. -Note that the pre-assigned IOAPIC dev->irq is valid only if the device -operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at -using dev->irq by the device driver to request for interrupt service -may result in unpredictable behavior. - -For each MSI-X vector granted, a device driver is responsible for calling -other functions like request_irq(), enable_irq(), etc. to enable -this vector with its corresponding interrupt service handler. It is -a device driver's choice to assign all vectors with the same -interrupt service handler or each vector with a unique interrupt -service handler. - -5.3.1 Handling MMIO address space of MSI-X Table - -The PCI 3.0 specification has implementation notes that MMIO address -space for a device's MSI-X structure should be isolated so that the -software system can set different pages for controlling accesses to the -MSI-X structure. The implementation of MSI support requires the PCI -subsystem, not a device driver, to maintain full control of the MSI-X -table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X -table/MSI-X PBA. A device driver should not access the MMIO address -space of the MSI-X table/MSI-X PBA. - -5.3.2 API pci_enable_msix - -int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) - -This API enables a device driver to request the PCI subsystem -to enable MSI-X messages on its hardware device. Depending on -the availability of PCI vectors resources, the PCI subsystem enables -either all or none of the requested vectors. - -Argument 'dev' points to the device (pci_dev) structure. - -Argument 'entries' is a pointer to an array of msix_entry structs. -The number of entries is indicated in argument 'nvec'. -struct msix_entry is defined in /driver/pci/msi.h: - -struct msix_entry { - u16 vector; /* kernel uses to write alloc vector */ - u16 entry; /* driver uses to specify entry */ -}; - -A device driver is responsible for initializing the field 'entry' of -each element with a unique entry supported by MSI-X table. Otherwise, --EINVAL will be returned as a result. A successful return of zero -indicates the PCI subsystem completed initializing each of the requested -entries of the MSI-X table with message address and message data. -Last but not least, the PCI subsystem will write the 1:1 -vector-to-entry mapping into the field 'vector' of each element. A -device driver is responsible for keeping track of allocated MSI-X -vectors in its internal data structure. - -A return of zero indicates that the number of MSI-X vectors was -successfully allocated. A return of greater than zero indicates -MSI-X vector shortage. Or a return of less than zero indicates -a failure. This failure may be a result of duplicate entries -specified in second argument, or a result of no available vector, -or a result of failing to initialize MSI-X table entries. - -5.3.3 API pci_disable_msix - -void pci_disable_msix(struct pci_dev *dev) - -This API should always be used to undo the effect of pci_enable_msix() -when a device driver is unloading. Note that a device driver should -always call free_irq() on all MSI-X vectors it has done request_irq() -on before calling this API. Failure to do so results in a BUG_ON() and -a device will be left with MSI-X enabled and leaks its vectors. - -5.3.4 MSI-X mode vs. legacy mode diagram - -The below diagram shows the events which switch the interrupt -mode on the MSI-X capable device function between MSI-X mode and -PIN-IRQ assertion mode (legacy). - - ------------ pci_enable_msix(,,n) ------------------------ - | | <=============== | | - | MSI-X MODE | | PIN-IRQ ASSERTION MODE | - | | ===============> | | - ------------ pci_disable_msix ------------------------ - -Figure 2. MSI-X Mode vs. Legacy Mode - -In Figure 2, a device operates by default in legacy mode. A -successful MSI-X request (using pci_enable_msix()) switches a -device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector -stored in dev->irq will be saved by the PCI subsystem; however, -unlike MSI mode, the PCI subsystem will not replace dev->irq with -assigned MSI-X vector because the PCI subsystem already writes the 1:1 -vector-to-entry mapping into the field 'vector' of each element -specified in second argument. - -To return back to its default mode, a device driver should always call -pci_disable_msix() to undo the effect of pci_enable_msix(). Note that -a device driver should always call free_irq() on all MSI-X vectors it -has done request_irq() on before calling pci_disable_msix(). Failure -to do so results in a BUG_ON() and a device will be left with MSI-X -enabled and leaks its vectors. Otherwise, the PCI subsystem switches a -device function's interrupt mode from MSI-X mode to legacy mode and -marks all allocated MSI-X vectors as unused. - -Once being marked as unused, there is no guarantee that the PCI -subsystem will reserve these MSI-X vectors for a device. Depending on -the availability of current PCI vector resources and the number of -MSI/MSI-X requests from other drivers, these MSI-X vectors may be -re-assigned. - -For the case where the PCI subsystem re-assigned these MSI-X vectors -to other drivers, a request to switch back to MSI-X mode may result -being assigned with another set of MSI-X vectors or a failure if no -more vectors are available. - -5.4 Handling function implementing both MSI and MSI-X capabilities - -For the case where a function implements both MSI and MSI-X -capabilities, the PCI subsystem enables a device to run either in MSI -mode or MSI-X mode but not both. A device driver determines whether it -wants MSI or MSI-X enabled on its hardware device. Once a device -driver requests for MSI, for example, it is prohibited from requesting -MSI-X; in other words, a device driver is not permitted to ping-pong -between MSI mod MSI-X mode during a run-time. - -5.5 Hardware requirements for MSI/MSI-X support - -MSI/MSI-X support requires support from both system hardware and -individual hardware device functions. - -5.5.1 Required x86 hardware support - -Since the target of MSI address is the local APIC CPU, enabling -MSI/MSI-X support in the Linux kernel is dependent on whether existing -system hardware supports local APIC. Users should verify that their -system supports local APIC operation by testing that it runs when -CONFIG_X86_LOCAL_APIC=y. - -In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set; -however, in UP environment, users must manually set -CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting -CONFIG_PCI_MSI enables the VECTOR based scheme and the option for -MSI-capable device drivers to selectively enable MSI/MSI-X. - -Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X -vector is allocated new during runtime and MSI/MSI-X support does not -depend on BIOS support. This key independency enables MSI/MSI-X -support on future IOxAPIC free platforms. - -5.5.2 Device hardware support - -The hardware device function supports MSI by indicating the -MSI/MSI-X capability structure on its PCI capability list. By -default, this capability structure will not be initialized by -the kernel to enable MSI during the system boot. In other words, -the device function is running on its default pin assertion mode. -Note that in many cases the hardware supporting MSI have bugs, -which may result in system hangs. The software driver of specific -MSI-capable hardware is responsible for deciding whether to call -pci_enable_msi or not. A return of zero indicates the kernel -successfully initialized the MSI/MSI-X capability structure of the -device function. The device function is now running on MSI/MSI-X mode. - -5.6 How to tell whether MSI/MSI-X is enabled on device function - -At the driver level, a return of zero from the function call of -pci_enable_msi()/pci_enable_msix() indicates to a device driver that -its device function is initialized successfully and ready to run in -MSI/MSI-X mode. - -At the user level, users can use the command 'cat /proc/interrupts' -to display the vectors allocated for devices and their interrupt -MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is -enabled on a SCSI Adaptec 39320D Ultra320 controller. - - CPU0 CPU1 - 0: 324639 0 IO-APIC-edge timer - 1: 1186 0 IO-APIC-edge i8042 - 2: 0 0 XT-PIC cascade - 12: 2797 0 IO-APIC-edge i8042 - 14: 6543 0 IO-APIC-edge ide0 - 15: 1 0 IO-APIC-edge ide1 -169: 0 0 IO-APIC-level uhci-hcd -185: 0 0 IO-APIC-level uhci-hcd -193: 138 10 PCI-MSI aic79xx -201: 30 0 PCI-MSI aic79xx -225: 30 0 IO-APIC-level aic7xxx -233: 30 0 IO-APIC-level aic7xxx -NMI: 0 0 -LOC: 324553 325068 -ERR: 0 -MIS: 0 - -6. MSI quirks - -Several PCI chipsets or devices are known to not support MSI. -The PCI stack provides 3 possible levels of MSI disabling: -* on a single device -* on all devices behind a specific bridge -* globally - -6.1. Disabling MSI on a single device - -Under some circumstances it might be required to disable MSI on a -single device. This may be achieved by either not calling pci_enable_msi() -or all, or setting the pci_dev->no_msi flag before (most of the time -in a quirk). - -6.2. Disabling MSI below a bridge - -The vast majority of MSI quirks are required by PCI bridges not -being able to route MSI between busses. In this case, MSI have to be -disabled on all devices behind this bridge. It is achieves by setting -the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge -subordinate bus. There is no need to set the same flag on bridges that -are below the broken bridge. When pci_enable_msi() is called to enable -MSI on a device, pci_msi_supported() takes care of checking the NO_MSI -flag in all parent busses of the device. - -Some bridges actually support dynamic MSI support enabling/disabling -by changing some bits in their PCI configuration space (especially -the Hypertransport chipsets such as the nVidia nForce and Serverworks -HT2000). It may then be required to update the NO_MSI flag on the -corresponding devices in the sysfs hierarchy. To enable MSI support -on device "0000:00:0e", do: - - echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus - -To disable MSI support, echo 0 instead of 1. Note that it should be -used with caution since changing this value might break interrupts. - -6.3. Disabling MSI globally - -Some extreme cases may require to disable MSI globally on the system. -For now, the only known case is a Serverworks PCI-X chipsets (MSI are -not supported on several busses that are not all connected to the -chipset in the Linux PCI hierarchy). In the vast majority of other -cases, disabling only behind a specific bridge is enough. - -For debugging purpose, the user may also pass pci=nomsi on the kernel -command-line to explicitly disable MSI globally. But, once the appro- -priate quirks are added to the kernel, this option should not be -required anymore. - -6.4. Finding why MSI cannot be enabled on a device - -Assuming that MSI are not enabled on a device, you should look at -dmesg to find messages that quirks may output when disabling MSI -on some devices, some bridges or even globally. -Then, lspci -t gives the list of bridges above a device. Reading -/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI -are enabled (1) or disabled (0). In 0 is found in a single bridge -msi_bus file above the device, MSI cannot be enabled. - -7. FAQ - -Q1. Are there any limitations on using the MSI? - -A1. If the PCI device supports MSI and conforms to the -specification and the platform supports the APIC local bus, -then using MSI should work. - -Q2. Will it work on all the Pentium processors (P3, P4, Xeon, -AMD processors)? In P3 IPI's are transmitted on the APIC local -bus and in P4 and Xeon they are transmitted on the system -bus. Are there any implications with this? - -A2. MSI support enables a PCI device sending an inbound -memory write (0xfeexxxxx as target address) on its PCI bus -directly to the FSB. Since the message address has a -redirection hint bit cleared, it should work. - -Q3. The target address 0xfeexxxxx will be translated by the -Host Bridge into an interrupt message. Are there any -limitations on the chipsets such as Intel 8xx, Intel e7xxx, -or VIA? - -A3. If these chipsets support an inbound memory write with -target address set as 0xfeexxxxx, as conformed to PCI -specification 2.3 or latest, then it should work. - -Q4. From the driver point of view, if the MSI is lost because -of errors occurring during inbound memory write, then it may -wait forever. Is there a mechanism for it to recover? - -A4. Since the target of the transaction is an inbound memory -write, all transaction termination conditions (Retry, -Master-Abort, Target-Abort, or normal completion) are -supported. A device sending an MSI must abide by all the PCI -rules and conditions regarding that inbound memory write. So, -if a retry is signaled it must retry, etc... We believe that -the recommendation for Abort is also a retry (refer to PCI -specification 2.3 or latest). diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX index 49f43946c6b6..812b17fe3ed0 100644 --- a/Documentation/PCI/00-INDEX +++ b/Documentation/PCI/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - this file +MSI-HOWTO.txt + - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ. PCI-DMA-mapping.txt - info for PCI drivers using DMA portably across all platforms PCIEBUS-HOWTO.txt diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt new file mode 100644 index 000000000000..256defd7e174 --- /dev/null +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -0,0 +1,509 @@ + The MSI Driver Guide HOWTO + Tom L Nguyen tom.l.nguyen@intel.com + 10/03/2003 + Revised Feb 12, 2004 by Martine Silbermann + email: Martine.Silbermann@hp.com + Revised Jun 25, 2004 by Tom L Nguyen + +1. About this guide + +This guide describes the basics of Message Signaled Interrupts (MSI), +the advantages of using MSI over traditional interrupt mechanisms, +and how to enable your driver to use MSI or MSI-X. Also included is +a Frequently Asked Questions (FAQ) section. + +1.1 Terminology + +PCI devices can be single-function or multi-function. In either case, +when this text talks about enabling or disabling MSI on a "device +function," it is referring to one specific PCI device and function and +not to all functions on a PCI device (unless the PCI device has only +one function). + +2. Copyright 2003 Intel Corporation + +3. What is MSI/MSI-X? + +Message Signaled Interrupt (MSI), as described in the PCI Local Bus +Specification Revision 2.3 or later, is an optional feature, and a +required feature for PCI Express devices. MSI enables a device function +to request service by sending an Inbound Memory Write on its PCI bus to +the FSB as a Message Signal Interrupt transaction. Because MSI is +generated in the form of a Memory Write, all transaction conditions, +such as a Retry, Master-Abort, Target-Abort or normal completion, are +supported. + +A PCI device that supports MSI must also support pin IRQ assertion +interrupt mechanism to provide backward compatibility for systems that +do not support MSI. In systems which support MSI, the bus driver is +responsible for initializing the message address and message data of +the device function's MSI/MSI-X capability structure during device +initial configuration. + +An MSI capable device function indicates MSI support by implementing +the MSI/MSI-X capability structure in its PCI capability list. The +device function may implement both the MSI capability structure and +the MSI-X capability structure; however, the bus driver should not +enable both. + +The MSI capability structure contains Message Control register, +Message Address register and Message Data register. These registers +provide the bus driver control over MSI. The Message Control register +indicates the MSI capability supported by the device. The Message +Address register specifies the target address and the Message Data +register specifies the characteristics of the message. To request +service, the device function writes the content of the Message Data +register to the target address. The device and its software driver +are prohibited from writing to these registers. + +The MSI-X capability structure is an optional extension to MSI. It +uses an independent and separate capability structure. There are +some key advantages to implementing the MSI-X capability structure +over the MSI capability structure as described below. + + - Support a larger maximum number of vectors per function. + + - Provide the ability for system software to configure + each vector with an independent message address and message + data, specified by a table that resides in Memory Space. + + - MSI and MSI-X both support per-vector masking. Per-vector + masking is an optional extension of MSI but a required + feature for MSI-X. Per-vector masking provides the kernel the + ability to mask/unmask a single MSI while running its + interrupt service routine. If per-vector masking is + not supported, then the device driver should provide the + hardware/software synchronization to ensure that the device + generates MSI when the driver wants it to do so. + +4. Why use MSI? + +As a benefit to the simplification of board design, MSI allows board +designers to remove out-of-band interrupt routing. MSI is another +step towards a legacy-free environment. + +Due to increasing pressure on chipset and processor packages to +reduce pin count, the need for interrupt pins is expected to +diminish over time. Devices, due to pin constraints, may implement +messages to increase performance. + +PCI Express endpoints uses INTx emulation (in-band messages) instead +of IRQ pin assertion. Using INTx emulation requires interrupt +sharing among devices connected to the same node (PCI bridge) while +MSI is unique (non-shared) and does not require BIOS configuration +support. As a result, the PCI Express technology requires MSI +support for better interrupt performance. + +Using MSI enables the device functions to support two or more +vectors, which can be configured to target different CPUs to +increase scalability. + +5. Configuring a driver to use MSI/MSI-X + +By default, the kernel will not enable MSI/MSI-X on all devices that +support this capability. The CONFIG_PCI_MSI kernel option +must be selected to enable MSI/MSI-X support. + +5.1 Including MSI/MSI-X support into the kernel + +To allow MSI/MSI-X capable device drivers to selectively enable +MSI/MSI-X (using pci_enable_msi()/pci_enable_msix() as described +below), the VECTOR based scheme needs to be enabled by setting +CONFIG_PCI_MSI during kernel config. + +Since the target of the inbound message is the local APIC, providing +CONFIG_X86_LOCAL_APIC must be enabled as well as CONFIG_PCI_MSI. + +5.2 Configuring for MSI support + +Due to the non-contiguous fashion in vector assignment of the +existing Linux kernel, this version does not support multiple +messages regardless of a device function is capable of supporting +more than one vector. To enable MSI on a device function's MSI +capability structure requires a device driver to call the function +pci_enable_msi() explicitly. + +5.2.1 API pci_enable_msi + +int pci_enable_msi(struct pci_dev *dev) + +With this new API, a device driver that wants to have MSI +enabled on its device function must call this API to enable MSI. +A successful call will initialize the MSI capability structure +with ONE vector, regardless of whether a device function is +capable of supporting multiple messages. This vector replaces the +pre-assigned dev->irq with a new MSI vector. To avoid a conflict +of the new assigned vector with existing pre-assigned vector requires +a device driver to call this API before calling request_irq(). + +5.2.2 API pci_disable_msi + +void pci_disable_msi(struct pci_dev *dev) + +This API should always be used to undo the effect of pci_enable_msi() +when a device driver is unloading. This API restores dev->irq with +the pre-assigned IOAPIC vector and switches a device's interrupt +mode to PCI pin-irq assertion/INTx emulation mode. + +Note that a device driver should always call free_irq() on the MSI vector +that it has done request_irq() on before calling this API. Failure to do +so results in a BUG_ON() and a device will be left with MSI enabled and +leaks its vector. + +5.2.3 MSI mode vs. legacy mode diagram + +The below diagram shows the events which switch the interrupt +mode on the MSI-capable device function between MSI mode and +PIN-IRQ assertion mode. + + ------------ pci_enable_msi ------------------------ + | | <=============== | | + | MSI MODE | | PIN-IRQ ASSERTION MODE | + | | ===============> | | + ------------ pci_disable_msi ------------------------ + + +Figure 1. MSI Mode vs. Legacy Mode + +In Figure 1, a device operates by default in legacy mode. Legacy +in this context means PCI pin-irq assertion or PCI-Express INTx +emulation. A successful MSI request (using pci_enable_msi()) switches +a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector +stored in dev->irq will be saved by the PCI subsystem and a new +assigned MSI vector will replace dev->irq. + +To return back to its default mode, a device driver should always call +pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a +device driver should always call free_irq() on the MSI vector it has +done request_irq() on before calling pci_disable_msi(). Failure to do +so results in a BUG_ON() and a device will be left with MSI enabled and +leaks its vector. Otherwise, the PCI subsystem restores a device's +dev->irq with a pre-assigned IOAPIC vector and marks the released +MSI vector as unused. + +Once being marked as unused, there is no guarantee that the PCI +subsystem will reserve this MSI vector for a device. Depending on +the availability of current PCI vector resources and the number of +MSI/MSI-X requests from other drivers, this MSI may be re-assigned. + +For the case where the PCI subsystem re-assigns this MSI vector to +another driver, a request to switch back to MSI mode may result +in being assigned a different MSI vector or a failure if no more +vectors are available. + +5.3 Configuring for MSI-X support + +Due to the ability of the system software to configure each vector of +the MSI-X capability structure with an independent message address +and message data, the non-contiguous fashion in vector assignment of +the existing Linux kernel has no impact on supporting multiple +messages on an MSI-X capable device functions. To enable MSI-X on +a device function's MSI-X capability structure requires its device +driver to call the function pci_enable_msix() explicitly. + +The function pci_enable_msix(), once invoked, enables either +all or nothing, depending on the current availability of PCI vector +resources. If the PCI vector resources are available for the number +of vectors requested by a device driver, this function will configure +the MSI-X table of the MSI-X capability structure of a device with +requested messages. To emphasize this reason, for example, a device +may be capable for supporting the maximum of 32 vectors while its +software driver usually may request 4 vectors. It is recommended +that the device driver should call this function once during the +initialization phase of the device driver. + +Unlike the function pci_enable_msi(), the function pci_enable_msix() +does not replace the pre-assigned IOAPIC dev->irq with a new MSI +vector because the PCI subsystem writes the 1:1 vector-to-entry mapping +into the field vector of each element contained in a second argument. +Note that the pre-assigned IOAPIC dev->irq is valid only if the device +operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at +using dev->irq by the device driver to request for interrupt service +may result in unpredictable behavior. + +For each MSI-X vector granted, a device driver is responsible for calling +other functions like request_irq(), enable_irq(), etc. to enable +this vector with its corresponding interrupt service handler. It is +a device driver's choice to assign all vectors with the same +interrupt service handler or each vector with a unique interrupt +service handler. + +5.3.1 Handling MMIO address space of MSI-X Table + +The PCI 3.0 specification has implementation notes that MMIO address +space for a device's MSI-X structure should be isolated so that the +software system can set different pages for controlling accesses to the +MSI-X structure. The implementation of MSI support requires the PCI +subsystem, not a device driver, to maintain full control of the MSI-X +table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X +table/MSI-X PBA. A device driver should not access the MMIO address +space of the MSI-X table/MSI-X PBA. + +5.3.2 API pci_enable_msix + +int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) + +This API enables a device driver to request the PCI subsystem +to enable MSI-X messages on its hardware device. Depending on +the availability of PCI vectors resources, the PCI subsystem enables +either all or none of the requested vectors. + +Argument 'dev' points to the device (pci_dev) structure. + +Argument 'entries' is a pointer to an array of msix_entry structs. +The number of entries is indicated in argument 'nvec'. +struct msix_entry is defined in /driver/pci/msi.h: + +struct msix_entry { + u16 vector; /* kernel uses to write alloc vector */ + u16 entry; /* driver uses to specify entry */ +}; + +A device driver is responsible for initializing the field 'entry' of +each element with a unique entry supported by MSI-X table. Otherwise, +-EINVAL will be returned as a result. A successful return of zero +indicates the PCI subsystem completed initializing each of the requested +entries of the MSI-X table with message address and message data. +Last but not least, the PCI subsystem will write the 1:1 +vector-to-entry mapping into the field 'vector' of each element. A +device driver is responsible for keeping track of allocated MSI-X +vectors in its internal data structure. + +A return of zero indicates that the number of MSI-X vectors was +successfully allocated. A return of greater than zero indicates +MSI-X vector shortage. Or a return of less than zero indicates +a failure. This failure may be a result of duplicate entries +specified in second argument, or a result of no available vector, +or a result of failing to initialize MSI-X table entries. + +5.3.3 API pci_disable_msix + +void pci_disable_msix(struct pci_dev *dev) + +This API should always be used to undo the effect of pci_enable_msix() +when a device driver is unloading. Note that a device driver should +always call free_irq() on all MSI-X vectors it has done request_irq() +on before calling this API. Failure to do so results in a BUG_ON() and +a device will be left with MSI-X enabled and leaks its vectors. + +5.3.4 MSI-X mode vs. legacy mode diagram + +The below diagram shows the events which switch the interrupt +mode on the MSI-X capable device function between MSI-X mode and +PIN-IRQ assertion mode (legacy). + + ------------ pci_enable_msix(,,n) ------------------------ + | | <=============== | | + | MSI-X MODE | | PIN-IRQ ASSERTION MODE | + | | ===============> | | + ------------ pci_disable_msix ------------------------ + +Figure 2. MSI-X Mode vs. Legacy Mode + +In Figure 2, a device operates by default in legacy mode. A +successful MSI-X request (using pci_enable_msix()) switches a +device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector +stored in dev->irq will be saved by the PCI subsystem; however, +unlike MSI mode, the PCI subsystem will not replace dev->irq with +assigned MSI-X vector because the PCI subsystem already writes the 1:1 +vector-to-entry mapping into the field 'vector' of each element +specified in second argument. + +To return back to its default mode, a device driver should always call +pci_disable_msix() to undo the effect of pci_enable_msix(). Note that +a device driver should always call free_irq() on all MSI-X vectors it +has done request_irq() on before calling pci_disable_msix(). Failure +to do so results in a BUG_ON() and a device will be left with MSI-X +enabled and leaks its vectors. Otherwise, the PCI subsystem switches a +device function's interrupt mode from MSI-X mode to legacy mode and +marks all allocated MSI-X vectors as unused. + +Once being marked as unused, there is no guarantee that the PCI +subsystem will reserve these MSI-X vectors for a device. Depending on +the availability of current PCI vector resources and the number of +MSI/MSI-X requests from other drivers, these MSI-X vectors may be +re-assigned. + +For the case where the PCI subsystem re-assigned these MSI-X vectors +to other drivers, a request to switch back to MSI-X mode may result +being assigned with another set of MSI-X vectors or a failure if no +more vectors are available. + +5.4 Handling function implementing both MSI and MSI-X capabilities + +For the case where a function implements both MSI and MSI-X +capabilities, the PCI subsystem enables a device to run either in MSI +mode or MSI-X mode but not both. A device driver determines whether it +wants MSI or MSI-X enabled on its hardware device. Once a device +driver requests for MSI, for example, it is prohibited from requesting +MSI-X; in other words, a device driver is not permitted to ping-pong +between MSI mod MSI-X mode during a run-time. + +5.5 Hardware requirements for MSI/MSI-X support + +MSI/MSI-X support requires support from both system hardware and +individual hardware device functions. + +5.5.1 Required x86 hardware support + +Since the target of MSI address is the local APIC CPU, enabling +MSI/MSI-X support in the Linux kernel is dependent on whether existing +system hardware supports local APIC. Users should verify that their +system supports local APIC operation by testing that it runs when +CONFIG_X86_LOCAL_APIC=y. + +In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set; +however, in UP environment, users must manually set +CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting +CONFIG_PCI_MSI enables the VECTOR based scheme and the option for +MSI-capable device drivers to selectively enable MSI/MSI-X. + +Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X +vector is allocated new during runtime and MSI/MSI-X support does not +depend on BIOS support. This key independency enables MSI/MSI-X +support on future IOxAPIC free platforms. + +5.5.2 Device hardware support + +The hardware device function supports MSI by indicating the +MSI/MSI-X capability structure on its PCI capability list. By +default, this capability structure will not be initialized by +the kernel to enable MSI during the system boot. In other words, +the device function is running on its default pin assertion mode. +Note that in many cases the hardware supporting MSI have bugs, +which may result in system hangs. The software driver of specific +MSI-capable hardware is responsible for deciding whether to call +pci_enable_msi or not. A return of zero indicates the kernel +successfully initialized the MSI/MSI-X capability structure of the +device function. The device function is now running on MSI/MSI-X mode. + +5.6 How to tell whether MSI/MSI-X is enabled on device function + +At the driver level, a return of zero from the function call of +pci_enable_msi()/pci_enable_msix() indicates to a device driver that +its device function is initialized successfully and ready to run in +MSI/MSI-X mode. + +At the user level, users can use the command 'cat /proc/interrupts' +to display the vectors allocated for devices and their interrupt +MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is +enabled on a SCSI Adaptec 39320D Ultra320 controller. + + CPU0 CPU1 + 0: 324639 0 IO-APIC-edge timer + 1: 1186 0 IO-APIC-edge i8042 + 2: 0 0 XT-PIC cascade + 12: 2797 0 IO-APIC-edge i8042 + 14: 6543 0 IO-APIC-edge ide0 + 15: 1 0 IO-APIC-edge ide1 +169: 0 0 IO-APIC-level uhci-hcd +185: 0 0 IO-APIC-level uhci-hcd +193: 138 10 PCI-MSI aic79xx +201: 30 0 PCI-MSI aic79xx +225: 30 0 IO-APIC-level aic7xxx +233: 30 0 IO-APIC-level aic7xxx +NMI: 0 0 +LOC: 324553 325068 +ERR: 0 +MIS: 0 + +6. MSI quirks + +Several PCI chipsets or devices are known to not support MSI. +The PCI stack provides 3 possible levels of MSI disabling: +* on a single device +* on all devices behind a specific bridge +* globally + +6.1. Disabling MSI on a single device + +Under some circumstances it might be required to disable MSI on a +single device. This may be achieved by either not calling pci_enable_msi() +or all, or setting the pci_dev->no_msi flag before (most of the time +in a quirk). + +6.2. Disabling MSI below a bridge + +The vast majority of MSI quirks are required by PCI bridges not +being able to route MSI between busses. In this case, MSI have to be +disabled on all devices behind this bridge. It is achieves by setting +the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge +subordinate bus. There is no need to set the same flag on bridges that +are below the broken bridge. When pci_enable_msi() is called to enable +MSI on a device, pci_msi_supported() takes care of checking the NO_MSI +flag in all parent busses of the device. + +Some bridges actually support dynamic MSI support enabling/disabling +by changing some bits in their PCI configuration space (especially +the Hypertransport chipsets such as the nVidia nForce and Serverworks +HT2000). It may then be required to update the NO_MSI flag on the +corresponding devices in the sysfs hierarchy. To enable MSI support +on device "0000:00:0e", do: + + echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus + +To disable MSI support, echo 0 instead of 1. Note that it should be +used with caution since changing this value might break interrupts. + +6.3. Disabling MSI globally + +Some extreme cases may require to disable MSI globally on the system. +For now, the only known case is a Serverworks PCI-X chipsets (MSI are +not supported on several busses that are not all connected to the +chipset in the Linux PCI hierarchy). In the vast majority of other +cases, disabling only behind a specific bridge is enough. + +For debugging purpose, the user may also pass pci=nomsi on the kernel +command-line to explicitly disable MSI globally. But, once the appro- +priate quirks are added to the kernel, this option should not be +required anymore. + +6.4. Finding why MSI cannot be enabled on a device + +Assuming that MSI are not enabled on a device, you should look at +dmesg to find messages that quirks may output when disabling MSI +on some devices, some bridges or even globally. +Then, lspci -t gives the list of bridges above a device. Reading +/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI +are enabled (1) or disabled (0). In 0 is found in a single bridge +msi_bus file above the device, MSI cannot be enabled. + +7. FAQ + +Q1. Are there any limitations on using the MSI? + +A1. If the PCI device supports MSI and conforms to the +specification and the platform supports the APIC local bus, +then using MSI should work. + +Q2. Will it work on all the Pentium processors (P3, P4, Xeon, +AMD processors)? In P3 IPI's are transmitted on the APIC local +bus and in P4 and Xeon they are transmitted on the system +bus. Are there any implications with this? + +A2. MSI support enables a PCI device sending an inbound +memory write (0xfeexxxxx as target address) on its PCI bus +directly to the FSB. Since the message address has a +redirection hint bit cleared, it should work. + +Q3. The target address 0xfeexxxxx will be translated by the +Host Bridge into an interrupt message. Are there any +limitations on the chipsets such as Intel 8xx, Intel e7xxx, +or VIA? + +A3. If these chipsets support an inbound memory write with +target address set as 0xfeexxxxx, as conformed to PCI +specification 2.3 or latest, then it should work. + +Q4. From the driver point of view, if the MSI is lost because +of errors occurring during inbound memory write, then it may +wait forever. Is there a mechanism for it to recover? + +A4. Since the target of the transaction is an inbound memory +write, all transaction termination conditions (Retry, +Master-Abort, Target-Abort, or normal completion) are +supported. A device sending an MSI must abide by all the PCI +rules and conditions regarding that inbound memory write. So, +if a retry is signaled it must retry, etc... We believe that +the recommendation for Abort is also a retry (refer to PCI +specification 2.3 or latest). diff --git a/Documentation/README.DAC960 b/Documentation/README.DAC960 deleted file mode 100644 index 0e8f618ab534..000000000000 --- a/Documentation/README.DAC960 +++ /dev/null @@ -1,756 +0,0 @@ - Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers - - Version 2.2.11 for Linux 2.2.19 - Version 2.4.11 for Linux 2.4.12 - - PRODUCTION RELEASE - - 11 October 2001 - - Leonard N. Zubkoff - Dandelion Digital - lnz@dandelion.com - - Copyright 1998-2001 by Leonard N. Zubkoff - - - INTRODUCTION - -Mylex, Inc. designs and manufactures a variety of high performance PCI RAID -controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont, -California 94555, USA and can be reached at 510.796.6100 or on the World Wide -Web at http://www.mylex.com. Mylex Technical Support can be reached by -electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at -510.745.7715. Contact information for offices in Europe and Japan is available -on their Web site. - -The latest information on Linux support for DAC960 PCI RAID Controllers, as -well as the most recent release of this driver, will always be available from -my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960 -driver supports all current Mylex PCI RAID controllers including the new -eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely -new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250, -and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as -minimum firmware version requirements. For simplicity, in most places this -documentation refers to DAC960 generically rather than explicitly listing all -the supported models. - -Driver bug reports should be sent via electronic mail to "lnz@dandelion.com". -Please include with the bug report the complete configuration messages reported -by the driver at startup, along with any subsequent system messages relevant to -the controller's operation, and a detailed description of your system's -hardware configuration. Driver bugs are actually quite rare; if you encounter -problems with disks being marked offline, for example, please contact Mylex -Technical Support as the problem is related to the hardware configuration -rather than the Linux driver. - -Please consult the RAID controller documentation for detailed information -regarding installation and configuration of the controllers. This document -primarily provides information specific to the Linux support. - - - DRIVER FEATURES - -The DAC960 RAID controllers are supported solely as high performance RAID -controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960 -driver operates at the block device level, the same level as the SCSI and IDE -drivers. Unlike other RAID controllers currently supported on Linux, the -DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the -complexity and unnecessary code that would be associated with an implementation -as a SCSI driver. The DAC960 driver is designed for as high a performance as -possible with no compromises or extra code for compatibility with lower -performance devices. The DAC960 driver includes extensive error logging and -online configuration management capabilities. Except for initial configuration -of the controller and adding new disk drives, most everything can be handled -from Linux while the system is operational. - -The DAC960 driver is architected to support up to 8 controllers per system. -Each DAC960 parallel SCSI controller can support up to 15 disk drives per -channel, for a maximum of 60 drives on a four channel controller; the fibre -channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for -a total of 250 drives. The drives installed on a controller are divided into -one or more "Drive Groups", and then each Drive Group is subdivided further -into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level -and caching policy associated with it, and it appears to Linux as a single -block device. Logical Drives are further subdivided into up to 7 partitions -through the normal Linux and PC disk partitioning schemes. Logical Drives are -also known as "System Drives", and Drive Groups are also called "Packs". Both -terms are in use in the Mylex documentation; I have chosen to standardize on -the more generic "Logical Drive" and "Drive Group". - -DAC960 RAID disk devices are named in the style of the obsolete Device File -System (DEVFS). The device corresponding to Logical Drive D on Controller C -is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1 -through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on -Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI -disks the device names will not change in the event of a disk drive failure. -The DAC960 driver is assigned major numbers 48 - 55 with one major number per -controller. The 8 bits of minor number are divided into 5 bits for the Logical -Drive and 3 bits for the partition. - - - SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS - -The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID -PCI RAID Controllers as of the date of this document. It is recommended that -anyone purchasing a Mylex PCI RAID Controller not in the following table -contact the author beforehand to verify that it is or will be supported. - -eXtremeRAID 3000 - 1 Wide Ultra-2/LVD SCSI channel - 2 External Fibre FC-AL channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -eXtremeRAID 2000 - 4 Wide Ultra-160 LVD SCSI channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -AcceleRAID 352 - 2 Wide Ultra-160 LVD SCSI channels - 100MHz Intel i960RN RISC Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -AcceleRAID 170 - 1 Wide Ultra-160 LVD SCSI channel - 100MHz Intel i960RM RISC Processor - 16MB/32MB/64MB ECC SDRAM Memory - -AcceleRAID 160 (AcceleRAID 170LP) - 1 Wide Ultra-160 LVD SCSI channel - 100MHz Intel i960RS RISC Processor - Built in 16M ECC SDRAM Memory - PCI Low Profile Form Factor - fit for 2U height - -eXtremeRAID 1100 (DAC1164P) - 3 Wide Ultra-2/LVD SCSI channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup - -AcceleRAID 250 (DAC960PTL1) - Uses onboard Symbios SCSI chips on certain motherboards - Also includes one onboard Wide Ultra-2/LVD SCSI Channel - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -AcceleRAID 200 (DAC960PTL0) - Uses onboard Symbios SCSI chips on certain motherboards - Includes no onboard SCSI Channels - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -AcceleRAID 150 (DAC960PRL) - Uses onboard Symbios SCSI chips on certain motherboards - Also includes one onboard Wide Ultra-2/LVD SCSI Channel - 33MHz Intel i960RP RISC Processor - 4MB Parity EDO Memory - -DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels - 33MHz Intel i960RP RISC Processor - 4MB/8MB ECC EDO Memory - -DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels - Intel i960CF RISC Processor - 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960PD 1/2/3 Wide Fast SCSI-2 Channels - Intel i960CF RISC Processor - 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960PL 1/2/3 Wide Fast SCSI-2 Channels - Intel i960 RISC Processor - 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960P 1/2/3 Wide Fast SCSI-2 Channels - Intel i960 RISC Processor - 2MB/4MB/8MB/16MB/32MB DRAM Memory - -For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version -6.00-01 or above is required. - -For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required. - -For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is -required. - -For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required. - -For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version -3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware -version 2.73-0-00 or above is required (for single Flash ROM controllers) - -Please note that not all SCSI disk drives are suitable for use with DAC960 -controllers, and only particular firmware versions of any given model may -actually function correctly. Similarly, not all motherboards have a BIOS that -properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150, -DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device. -If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to -verify compatibility. Mylex makes available a hard disk compatibility list at -http://www.mylex.com/support/hdcomp/hd-lists.html. - - - DRIVER INSTALLATION - -This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12. - -To install the DAC960 RAID driver, you may use the following commands, -replacing "/usr/src" with wherever you keep your Linux kernel source tree: - - cd /usr/src - tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz) - mv README.DAC960 linux/Documentation - mv DAC960.[ch] linux/drivers/block - patch -p0 < DAC960.patch (if DAC960.patch is included) - cd linux - make config - make bzImage (or zImage) - -Then install "arch/i386/boot/bzImage" or "arch/i386/boot/zImage" as your -standard kernel, run lilo if appropriate, and reboot. - -To create the necessary devices in /dev, the "make_rd" script included in -"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used. -LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive -are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with -statically linked executables of LILO and FDISK. This modified version of LILO -will allow booting from a DAC960 controller and/or mounting the root file -system from a DAC960. - -Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID -controllers. Installing directly onto a DAC960 may be problematic from other -Linux distributions until their installation utilities are updated. - - - INSTALLATION NOTES - -Before installing Linux or adding DAC960 logical drives to an existing Linux -system, the controller must first be configured to provide one or more logical -drives using the BIOS Configuration Utility or DACCF. Please note that since -there are only at most 6 usable partitions on each logical drive, systems -requiring more partitions should subdivide a drive group into multiple logical -drives, each of which can have up to 6 usable partitions. Also, note that with -large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63) -rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do -will cause the logical drive geometry to have more than 65535 cylinders which -will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry -can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M -during the BIOS initialization sequence. - -For maximum performance and the most efficient E2FSCK performance, it is -recommended that EXT2 file systems be built with a 4KB block size and 16 block -stride to match the DAC960 controller's 64KB default stripe size. The command -"mke2fs -b 4096 -R stride=16 " is appropriate. Unless there will be a -large number of small files on the file systems, it is also beneficial to add -the "-i 16384" option to increase the bytes per inode parameter thereby -reducing the file system metadata. Finally, on systems that will only be run -with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks -with the "-s 1" option. - - - DAC960 ANNOUNCEMENTS MAILING LIST - -The DAC960 Announcements Mailing List provides a forum for informing Linux -users of new driver releases and other announcements regarding Linux support -for DAC960 PCI RAID Controllers. To join the mailing list, send a message to -"dac960-announce-request@dandelion.com" with the line "subscribe" in the -message body. - - - CONTROLLER CONFIGURATION AND STATUS MONITORING - -The DAC960 RAID controllers running firmware 4.06 or above include a Background -Initialization facility so that system downtime is minimized both for initial -installation and subsequent configuration of additional storage. The BIOS -Configuration Utility (accessible via Alt-R during the BIOS initialization -sequence) is used to quickly configure the controller, and then the logical -drives that have been created are available for immediate use even while they -are still being initialized by the controller. The primary need for online -configuration and status monitoring is then to avoid system downtime when disk -drives fail and must be replaced. Mylex's online monitoring and configuration -utilities are being ported to Linux and will become available at some point in -the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure) -enclosure, the controller is able to rebuild failed drives automatically as -soon as a drive replacement is made available. - -The primary interfaces for controller configuration and status monitoring are -special files created in the /proc/rd/... hierarchy along with the normal -system console logging mechanism. Whenever the system is operating, the DAC960 -driver queries each controller for status information every 10 seconds, and -checks for additional conditions every 60 seconds. The initial status of each -controller is always available for controller N in /proc/rd/cN/initial_status, -and the current status as of the last status monitoring query is available in -/proc/rd/cN/current_status. In addition, status changes are also logged by the -driver to the system console and will appear in the log files maintained by -syslog. The progress of asynchronous rebuild or consistency check operations -is also available in /proc/rd/cN/current_status, and progress messages are -logged to the system console at most every 60 seconds. - -Starting with the 2.2.3/2.0.3 versions of the driver, the status information -available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been -augmented to include the vendor, model, revision, and serial number (if -available) for each physical device found connected to the controller: - -***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PRL PCI RAID Controller - Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB - PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned - PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - SAF-TE Enclosure Management Enabled - Physical Devices: - 0:0 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68016775HA - Disk Status: Online, 17928192 blocks - 0:1 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68004E53HA - Disk Status: Online, 17928192 blocks - 0:2 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 13013935HA - Disk Status: Online, 17928192 blocks - 0:3 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 13016897HA - Disk Status: Online, 17928192 blocks - 0:4 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68019905HA - Disk Status: Online, 17928192 blocks - 0:5 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68012753HA - Disk Status: Online, 17928192 blocks - 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61 - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -To simplify the monitoring process for custom software, the special file -/proc/rd/status returns "OK" when all DAC960 controllers in the system are -operating normally and no failures have occurred, or "ALERT" if any logical -drives are offline or critical or any non-standby physical drives are dead. - -Configuration commands for controller N are available via the special file -/proc/rd/cN/user_command. A human readable command can be written to this -special file to initiate a configuration operation, and the results of the -operation can then be read back from the special file in addition to being -logged to the system console. The shell command sequence - - echo "" > /proc/rd/c0/user_command - cat /proc/rd/c0/user_command - -is typically used to execute configuration commands. The configuration -commands are: - - flush-cache - - The "flush-cache" command flushes the controller's cache. The system - automatically flushes the cache at shutdown or if the driver module is - unloaded, so this command is only needed to be certain a write back cache - is flushed to disk before the system is powered off by a command to a UPS. - Note that the flush-cache command also stops an asynchronous rebuild or - consistency check, so it should not be used except when the system is being - halted. - - kill : - - The "kill" command marks the physical drive : as DEAD. - This command is provided primarily for testing, and should not be used - during normal system operation. - - make-online : - - The "make-online" command changes the physical drive : - from status DEAD to status ONLINE. In cases where multiple physical drives - have been killed simultaneously, this command may be used to bring all but - one of them back online, after which a rebuild to the final drive is - necessary. - - Warning: make-online should only be used on a dead physical drive that is - an active part of a drive group, never on a standby drive. The command - should never be used on a dead drive that is part of a critical logical - drive; rebuild should be used if only a single drive is dead. - - make-standby : - - The "make-standby" command changes physical drive : - from status DEAD to status STANDBY. It should only be used in cases where - a dead drive was replaced after an automatic rebuild was performed onto a - standby drive. It cannot be used to add a standby drive to the controller - configuration if one was not created initially; the BIOS Configuration - Utility must be used for that currently. - - rebuild : - - The "rebuild" command initiates an asynchronous rebuild onto physical drive - :. It should only be used when a dead drive has been - replaced. - - check-consistency - - The "check-consistency" command initiates an asynchronous consistency check - of with automatic restoration. It can be used - whenever it is desired to verify the consistency of the redundancy - information. - - cancel-rebuild - cancel-consistency-check - - The "cancel-rebuild" and "cancel-consistency-check" commands cancel any - rebuild or consistency check operations previously initiated. - - - EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE - -The following annotated logs demonstrate the controller configuration and and -online status monitoring capabilities of the Linux DAC960 Driver. The test -configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a -DAC960PJ controller. The physical drives are configured into a single drive -group without a standby drive, and the drive group has been configured into two -logical drives, one RAID-5 and one RAID-6. Note that these logs are from an -earlier version of the driver and the messages have changed somewhat with newer -releases, but the functionality remains similar. First, here is the current -status of the RAID configuration: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -The above messages indicate that everything is healthy, and /proc/rd/status -returns "OK" indicating that there are no problems with any DAC960 controller -in the system. For demonstration purposes, while I/O is active Physical Drive -1:1 is now disconnected, simulating a drive failure. The failure is noted by -the driver within 10 seconds of the controller's having detected it, and the -driver logs the following console status messages indicating that Logical -Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD: - -DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command -DAC960#0: Physical Drive 1:1 is now DEAD -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL - -The Sense Keys logged here are just Check Condition / Unit Attention conditions -arising from a SCSI bus reset that is forced by the controller during its error -recovery procedures. Concurrently with the above, the driver status available -from /proc/rd also reflects the drive failure. The status message in -/proc/rd/status has changed from "OK" to "ALERT": - -gwynedd:/u/lnz# cat /proc/rd/status -ALERT - -and /proc/rd/c0/current_status has been updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Dead, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -Since there are no standby drives configured, the system can continue to access -the logical drives in a performance degraded mode until the failed drive is -replaced and a rebuild operation completed to restore the redundancy of the -logical drives. Once Physical Drive 1:1 is replaced with a properly -functioning drive, or if the physical drive was killed without having failed -(e.g., due to electrical problems on the SCSI bus), the user can instruct the -controller to initiate a rebuild operation onto the newly replaced drive: - -gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command -gwynedd:/u/lnz# cat /proc/rd/c0/user_command -Rebuild of Physical Drive 1:1 Initiated - -The echo command instructs the controller to initiate an asynchronous rebuild -operation onto Physical Drive 1:1, and the status message that results from the -operation is then available for reading from /proc/rd/c0/user_command, as well -as being logged to the console by the driver. - -Within 10 seconds of this command the driver logs the initiation of the -asynchronous rebuild operation: - -DAC960#0: Rebuild of Physical Drive 1:1 Initiated -DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 -DAC960#0: Physical Drive 1:1 is now WRITE-ONLY -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed - -and /proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Write-Only, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed - -As the rebuild progresses, the current status in /proc/rd/c0/current_status is -updated every 10 seconds: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Write-Only, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed - -and every minute a progress message is logged to the console by the driver: - -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed - -Finally, the rebuild completes successfully. The driver logs the status of the -logical and physical drives and the rebuild completion: - -DAC960#0: Rebuild Completed Successfully -DAC960#0: Physical Drive 1:1 is now ONLINE -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE - -/proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru - Rebuild Completed Successfully - -and /proc/rd/status indicates that everything is healthy once again: - -gwynedd:/u/lnz# cat /proc/rd/status -OK - - - EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE - -The following annotated logs demonstrate the controller configuration and and -online status monitoring capabilities of the Linux DAC960 Driver. The test -configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a -DAC960PJ controller. The physical drives are configured into a single drive -group with a standby drive, and the drive group has been configured into two -logical drives, one RAID-5 and one RAID-6. Note that these logs are from an -earlier version of the driver and the messages have changed somewhat with newer -releases, but the functionality remains similar. First, here is the current -status of the RAID configuration: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Standby, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -The above messages indicate that everything is healthy, and /proc/rd/status -returns "OK" indicating that there are no problems with any DAC960 controller -in the system. For demonstration purposes, while I/O is active Physical Drive -1:2 is now disconnected, simulating a drive failure. The failure is noted by -the driver within 10 seconds of the controller's having detected it, and the -driver logs the following console status messages: - -DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command -DAC960#0: Physical Drive 1:2 is now DEAD -DAC960#0: Physical Drive 1:2 killed because it was removed -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL - -Since a standby drive is configured, the controller automatically begins -rebuilding onto the standby drive: - -DAC960#0: Physical Drive 1:3 is now WRITE-ONLY -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed - -Concurrently with the above, the driver status available from /proc/rd also -reflects the drive failure and automatic rebuild. The status message in -/proc/rd/status has changed from "OK" to "ALERT": - -gwynedd:/u/lnz# cat /proc/rd/status -ALERT - -and /proc/rd/c0/current_status has been updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Write-Only, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed - -As the rebuild progresses, the current status in /proc/rd/c0/current_status is -updated every 10 seconds: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Write-Only, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed - -and every minute a progress message is logged on the console by the driver: - -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed - -Finally, the rebuild completes successfully. The driver logs the status of the -logical and physical drives and the rebuild completion: - -DAC960#0: Rebuild Completed Successfully -DAC960#0: Physical Drive 1:3 is now ONLINE -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE - -/proc/rd/c0/current_status is updated: - -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - Rebuild Completed Successfully - -and /proc/rd/status indicates that everything is healthy once again: - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -Note that the absence of a viable standby drive does not create an "ALERT" -status. Once dead Physical Drive 1:2 has been replaced, the controller must be -told that this has occurred and that the newly replaced drive should become the -new standby drive: - -gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command -gwynedd:/u/lnz# cat /proc/rd/c0/user_command -Make Standby of Physical Drive 1:2 Succeeded - -The echo command instructs the controller to make Physical Drive 1:2 into a -standby drive, and the status message that results from the operation is then -available for reading from /proc/rd/c0/user_command, as well as being logged to -the console by the driver. Within 60 seconds of this command the driver logs: - -DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 -DAC960#0: Physical Drive 1:2 is now STANDBY -DAC960#0: Make Standby of Physical Drive 1:2 Succeeded - -and /proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Standby, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - Rebuild Completed Successfully diff --git a/Documentation/README.cycladesZ b/Documentation/README.cycladesZ deleted file mode 100644 index 024a69443cc2..000000000000 --- a/Documentation/README.cycladesZ +++ /dev/null @@ -1,8 +0,0 @@ - -The Cyclades-Z must have firmware loaded onto the card before it will -operate. This operation should be performed during system startup, - -The firmware, loader program and the latest device driver code are -available from Cyclades at - ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ - diff --git a/Documentation/blockdev/00-INDEX b/Documentation/blockdev/00-INDEX new file mode 100644 index 000000000000..86f054c47013 --- /dev/null +++ b/Documentation/blockdev/00-INDEX @@ -0,0 +1,16 @@ +00-INDEX + - this file +README.DAC960 + - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux. +cciss.txt + - info, major/minor #'s for Compaq's SMART Array Controllers. +cpqarray.txt + - info on using Compaq's SMART2 Intelligent Disk Array Controllers. +floppy.txt + - notes and driver options for the floppy disk driver. +nbd.txt + - info on a TCP implementation of a network block device. +paride.txt + - information about the parallel port IDE subsystem. +ramdisk.txt + - short guide on how to set up and use the RAM disk. diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960 new file mode 100644 index 000000000000..0e8f618ab534 --- /dev/null +++ b/Documentation/blockdev/README.DAC960 @@ -0,0 +1,756 @@ + Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers + + Version 2.2.11 for Linux 2.2.19 + Version 2.4.11 for Linux 2.4.12 + + PRODUCTION RELEASE + + 11 October 2001 + + Leonard N. Zubkoff + Dandelion Digital + lnz@dandelion.com + + Copyright 1998-2001 by Leonard N. Zubkoff + + + INTRODUCTION + +Mylex, Inc. designs and manufactures a variety of high performance PCI RAID +controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont, +California 94555, USA and can be reached at 510.796.6100 or on the World Wide +Web at http://www.mylex.com. Mylex Technical Support can be reached by +electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at +510.745.7715. Contact information for offices in Europe and Japan is available +on their Web site. + +The latest information on Linux support for DAC960 PCI RAID Controllers, as +well as the most recent release of this driver, will always be available from +my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960 +driver supports all current Mylex PCI RAID controllers including the new +eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely +new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250, +and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as +minimum firmware version requirements. For simplicity, in most places this +documentation refers to DAC960 generically rather than explicitly listing all +the supported models. + +Driver bug reports should be sent via electronic mail to "lnz@dandelion.com". +Please include with the bug report the complete configuration messages reported +by the driver at startup, along with any subsequent system messages relevant to +the controller's operation, and a detailed description of your system's +hardware configuration. Driver bugs are actually quite rare; if you encounter +problems with disks being marked offline, for example, please contact Mylex +Technical Support as the problem is related to the hardware configuration +rather than the Linux driver. + +Please consult the RAID controller documentation for detailed information +regarding installation and configuration of the controllers. This document +primarily provides information specific to the Linux support. + + + DRIVER FEATURES + +The DAC960 RAID controllers are supported solely as high performance RAID +controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960 +driver operates at the block device level, the same level as the SCSI and IDE +drivers. Unlike other RAID controllers currently supported on Linux, the +DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the +complexity and unnecessary code that would be associated with an implementation +as a SCSI driver. The DAC960 driver is designed for as high a performance as +possible with no compromises or extra code for compatibility with lower +performance devices. The DAC960 driver includes extensive error logging and +online configuration management capabilities. Except for initial configuration +of the controller and adding new disk drives, most everything can be handled +from Linux while the system is operational. + +The DAC960 driver is architected to support up to 8 controllers per system. +Each DAC960 parallel SCSI controller can support up to 15 disk drives per +channel, for a maximum of 60 drives on a four channel controller; the fibre +channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for +a total of 250 drives. The drives installed on a controller are divided into +one or more "Drive Groups", and then each Drive Group is subdivided further +into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level +and caching policy associated with it, and it appears to Linux as a single +block device. Logical Drives are further subdivided into up to 7 partitions +through the normal Linux and PC disk partitioning schemes. Logical Drives are +also known as "System Drives", and Drive Groups are also called "Packs". Both +terms are in use in the Mylex documentation; I have chosen to standardize on +the more generic "Logical Drive" and "Drive Group". + +DAC960 RAID disk devices are named in the style of the obsolete Device File +System (DEVFS). The device corresponding to Logical Drive D on Controller C +is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1 +through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on +Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI +disks the device names will not change in the event of a disk drive failure. +The DAC960 driver is assigned major numbers 48 - 55 with one major number per +controller. The 8 bits of minor number are divided into 5 bits for the Logical +Drive and 3 bits for the partition. + + + SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS + +The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID +PCI RAID Controllers as of the date of this document. It is recommended that +anyone purchasing a Mylex PCI RAID Controller not in the following table +contact the author beforehand to verify that it is or will be supported. + +eXtremeRAID 3000 + 1 Wide Ultra-2/LVD SCSI channel + 2 External Fibre FC-AL channels + 233MHz StrongARM SA 110 Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 32MB/64MB ECC SDRAM Memory + +eXtremeRAID 2000 + 4 Wide Ultra-160 LVD SCSI channels + 233MHz StrongARM SA 110 Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 32MB/64MB ECC SDRAM Memory + +AcceleRAID 352 + 2 Wide Ultra-160 LVD SCSI channels + 100MHz Intel i960RN RISC Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 32MB/64MB ECC SDRAM Memory + +AcceleRAID 170 + 1 Wide Ultra-160 LVD SCSI channel + 100MHz Intel i960RM RISC Processor + 16MB/32MB/64MB ECC SDRAM Memory + +AcceleRAID 160 (AcceleRAID 170LP) + 1 Wide Ultra-160 LVD SCSI channel + 100MHz Intel i960RS RISC Processor + Built in 16M ECC SDRAM Memory + PCI Low Profile Form Factor - fit for 2U height + +eXtremeRAID 1100 (DAC1164P) + 3 Wide Ultra-2/LVD SCSI channels + 233MHz StrongARM SA 110 Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup + +AcceleRAID 250 (DAC960PTL1) + Uses onboard Symbios SCSI chips on certain motherboards + Also includes one onboard Wide Ultra-2/LVD SCSI Channel + 66MHz Intel i960RD RISC Processor + 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory + +AcceleRAID 200 (DAC960PTL0) + Uses onboard Symbios SCSI chips on certain motherboards + Includes no onboard SCSI Channels + 66MHz Intel i960RD RISC Processor + 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory + +AcceleRAID 150 (DAC960PRL) + Uses onboard Symbios SCSI chips on certain motherboards + Also includes one onboard Wide Ultra-2/LVD SCSI Channel + 33MHz Intel i960RP RISC Processor + 4MB Parity EDO Memory + +DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels + 66MHz Intel i960RD RISC Processor + 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory + +DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels + 33MHz Intel i960RP RISC Processor + 4MB/8MB ECC EDO Memory + +DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels + Intel i960CF RISC Processor + 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory + +DAC960PD 1/2/3 Wide Fast SCSI-2 Channels + Intel i960CF RISC Processor + 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory + +DAC960PL 1/2/3 Wide Fast SCSI-2 Channels + Intel i960 RISC Processor + 2MB/4MB/8MB/16MB/32MB DRAM Memory + +DAC960P 1/2/3 Wide Fast SCSI-2 Channels + Intel i960 RISC Processor + 2MB/4MB/8MB/16MB/32MB DRAM Memory + +For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version +6.00-01 or above is required. + +For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required. + +For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is +required. + +For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required. + +For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version +3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware +version 2.73-0-00 or above is required (for single Flash ROM controllers) + +Please note that not all SCSI disk drives are suitable for use with DAC960 +controllers, and only particular firmware versions of any given model may +actually function correctly. Similarly, not all motherboards have a BIOS that +properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150, +DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device. +If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to +verify compatibility. Mylex makes available a hard disk compatibility list at +http://www.mylex.com/support/hdcomp/hd-lists.html. + + + DRIVER INSTALLATION + +This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12. + +To install the DAC960 RAID driver, you may use the following commands, +replacing "/usr/src" with wherever you keep your Linux kernel source tree: + + cd /usr/src + tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz) + mv README.DAC960 linux/Documentation + mv DAC960.[ch] linux/drivers/block + patch -p0 < DAC960.patch (if DAC960.patch is included) + cd linux + make config + make bzImage (or zImage) + +Then install "arch/i386/boot/bzImage" or "arch/i386/boot/zImage" as your +standard kernel, run lilo if appropriate, and reboot. + +To create the necessary devices in /dev, the "make_rd" script included in +"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used. +LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive +are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with +statically linked executables of LILO and FDISK. This modified version of LILO +will allow booting from a DAC960 controller and/or mounting the root file +system from a DAC960. + +Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID +controllers. Installing directly onto a DAC960 may be problematic from other +Linux distributions until their installation utilities are updated. + + + INSTALLATION NOTES + +Before installing Linux or adding DAC960 logical drives to an existing Linux +system, the controller must first be configured to provide one or more logical +drives using the BIOS Configuration Utility or DACCF. Please note that since +there are only at most 6 usable partitions on each logical drive, systems +requiring more partitions should subdivide a drive group into multiple logical +drives, each of which can have up to 6 usable partitions. Also, note that with +large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63) +rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do +will cause the logical drive geometry to have more than 65535 cylinders which +will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry +can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M +during the BIOS initialization sequence. + +For maximum performance and the most efficient E2FSCK performance, it is +recommended that EXT2 file systems be built with a 4KB block size and 16 block +stride to match the DAC960 controller's 64KB default stripe size. The command +"mke2fs -b 4096 -R stride=16 " is appropriate. Unless there will be a +large number of small files on the file systems, it is also beneficial to add +the "-i 16384" option to increase the bytes per inode parameter thereby +reducing the file system metadata. Finally, on systems that will only be run +with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks +with the "-s 1" option. + + + DAC960 ANNOUNCEMENTS MAILING LIST + +The DAC960 Announcements Mailing List provides a forum for informing Linux +users of new driver releases and other announcements regarding Linux support +for DAC960 PCI RAID Controllers. To join the mailing list, send a message to +"dac960-announce-request@dandelion.com" with the line "subscribe" in the +message body. + + + CONTROLLER CONFIGURATION AND STATUS MONITORING + +The DAC960 RAID controllers running firmware 4.06 or above include a Background +Initialization facility so that system downtime is minimized both for initial +installation and subsequent configuration of additional storage. The BIOS +Configuration Utility (accessible via Alt-R during the BIOS initialization +sequence) is used to quickly configure the controller, and then the logical +drives that have been created are available for immediate use even while they +are still being initialized by the controller. The primary need for online +configuration and status monitoring is then to avoid system downtime when disk +drives fail and must be replaced. Mylex's online monitoring and configuration +utilities are being ported to Linux and will become available at some point in +the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure) +enclosure, the controller is able to rebuild failed drives automatically as +soon as a drive replacement is made available. + +The primary interfaces for controller configuration and status monitoring are +special files created in the /proc/rd/... hierarchy along with the normal +system console logging mechanism. Whenever the system is operating, the DAC960 +driver queries each controller for status information every 10 seconds, and +checks for additional conditions every 60 seconds. The initial status of each +controller is always available for controller N in /proc/rd/cN/initial_status, +and the current status as of the last status monitoring query is available in +/proc/rd/cN/current_status. In addition, status changes are also logged by the +driver to the system console and will appear in the log files maintained by +syslog. The progress of asynchronous rebuild or consistency check operations +is also available in /proc/rd/cN/current_status, and progress messages are +logged to the system console at most every 60 seconds. + +Starting with the 2.2.3/2.0.3 versions of the driver, the status information +available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been +augmented to include the vendor, model, revision, and serial number (if +available) for each physical device found connected to the controller: + +***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PRL PCI RAID Controller + Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB + PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned + PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + SAF-TE Enclosure Management Enabled + Physical Devices: + 0:0 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68016775HA + Disk Status: Online, 17928192 blocks + 0:1 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68004E53HA + Disk Status: Online, 17928192 blocks + 0:2 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 13013935HA + Disk Status: Online, 17928192 blocks + 0:3 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 13016897HA + Disk Status: Online, 17928192 blocks + 0:4 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68019905HA + Disk Status: Online, 17928192 blocks + 0:5 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68012753HA + Disk Status: Online, 17928192 blocks + 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61 + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +To simplify the monitoring process for custom software, the special file +/proc/rd/status returns "OK" when all DAC960 controllers in the system are +operating normally and no failures have occurred, or "ALERT" if any logical +drives are offline or critical or any non-standby physical drives are dead. + +Configuration commands for controller N are available via the special file +/proc/rd/cN/user_command. A human readable command can be written to this +special file to initiate a configuration operation, and the results of the +operation can then be read back from the special file in addition to being +logged to the system console. The shell command sequence + + echo "" > /proc/rd/c0/user_command + cat /proc/rd/c0/user_command + +is typically used to execute configuration commands. The configuration +commands are: + + flush-cache + + The "flush-cache" command flushes the controller's cache. The system + automatically flushes the cache at shutdown or if the driver module is + unloaded, so this command is only needed to be certain a write back cache + is flushed to disk before the system is powered off by a command to a UPS. + Note that the flush-cache command also stops an asynchronous rebuild or + consistency check, so it should not be used except when the system is being + halted. + + kill : + + The "kill" command marks the physical drive : as DEAD. + This command is provided primarily for testing, and should not be used + during normal system operation. + + make-online : + + The "make-online" command changes the physical drive : + from status DEAD to status ONLINE. In cases where multiple physical drives + have been killed simultaneously, this command may be used to bring all but + one of them back online, after which a rebuild to the final drive is + necessary. + + Warning: make-online should only be used on a dead physical drive that is + an active part of a drive group, never on a standby drive. The command + should never be used on a dead drive that is part of a critical logical + drive; rebuild should be used if only a single drive is dead. + + make-standby : + + The "make-standby" command changes physical drive : + from status DEAD to status STANDBY. It should only be used in cases where + a dead drive was replaced after an automatic rebuild was performed onto a + standby drive. It cannot be used to add a standby drive to the controller + configuration if one was not created initially; the BIOS Configuration + Utility must be used for that currently. + + rebuild : + + The "rebuild" command initiates an asynchronous rebuild onto physical drive + :. It should only be used when a dead drive has been + replaced. + + check-consistency + + The "check-consistency" command initiates an asynchronous consistency check + of with automatic restoration. It can be used + whenever it is desired to verify the consistency of the redundancy + information. + + cancel-rebuild + cancel-consistency-check + + The "cancel-rebuild" and "cancel-consistency-check" commands cancel any + rebuild or consistency check operations previously initiated. + + + EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE + +The following annotated logs demonstrate the controller configuration and and +online status monitoring capabilities of the Linux DAC960 Driver. The test +configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a +DAC960PJ controller. The physical drives are configured into a single drive +group without a standby drive, and the drive group has been configured into two +logical drives, one RAID-5 and one RAID-6. Note that these logs are from an +earlier version of the driver and the messages have changed somewhat with newer +releases, but the functionality remains similar. First, here is the current +status of the RAID configuration: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status +***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PJ PCI RAID Controller + Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB + PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned + PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +gwynedd:/u/lnz# cat /proc/rd/status +OK + +The above messages indicate that everything is healthy, and /proc/rd/status +returns "OK" indicating that there are no problems with any DAC960 controller +in the system. For demonstration purposes, while I/O is active Physical Drive +1:1 is now disconnected, simulating a drive failure. The failure is noted by +the driver within 10 seconds of the controller's having detected it, and the +driver logs the following console status messages indicating that Logical +Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD: + +DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command +DAC960#0: Physical Drive 1:1 is now DEAD +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL + +The Sense Keys logged here are just Check Condition / Unit Attention conditions +arising from a SCSI bus reset that is forced by the controller during its error +recovery procedures. Concurrently with the above, the driver status available +from /proc/rd also reflects the drive failure. The status message in +/proc/rd/status has changed from "OK" to "ALERT": + +gwynedd:/u/lnz# cat /proc/rd/status +ALERT + +and /proc/rd/c0/current_status has been updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Dead, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +Since there are no standby drives configured, the system can continue to access +the logical drives in a performance degraded mode until the failed drive is +replaced and a rebuild operation completed to restore the redundancy of the +logical drives. Once Physical Drive 1:1 is replaced with a properly +functioning drive, or if the physical drive was killed without having failed +(e.g., due to electrical problems on the SCSI bus), the user can instruct the +controller to initiate a rebuild operation onto the newly replaced drive: + +gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command +gwynedd:/u/lnz# cat /proc/rd/c0/user_command +Rebuild of Physical Drive 1:1 Initiated + +The echo command instructs the controller to initiate an asynchronous rebuild +operation onto Physical Drive 1:1, and the status message that results from the +operation is then available for reading from /proc/rd/c0/user_command, as well +as being logged to the console by the driver. + +Within 10 seconds of this command the driver logs the initiation of the +asynchronous rebuild operation: + +DAC960#0: Rebuild of Physical Drive 1:1 Initiated +DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 +DAC960#0: Physical Drive 1:1 is now WRITE-ONLY +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed + +and /proc/rd/c0/current_status is updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Write-Only, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed + +As the rebuild progresses, the current status in /proc/rd/c0/current_status is +updated every 10 seconds: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Write-Only, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed + +and every minute a progress message is logged to the console by the driver: + +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed +DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed + +Finally, the rebuild completes successfully. The driver logs the status of the +logical and physical drives and the rebuild completion: + +DAC960#0: Rebuild Completed Successfully +DAC960#0: Physical Drive 1:1 is now ONLINE +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE + +/proc/rd/c0/current_status is updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru + Rebuild Completed Successfully + +and /proc/rd/status indicates that everything is healthy once again: + +gwynedd:/u/lnz# cat /proc/rd/status +OK + + + EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE + +The following annotated logs demonstrate the controller configuration and and +online status monitoring capabilities of the Linux DAC960 Driver. The test +configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a +DAC960PJ controller. The physical drives are configured into a single drive +group with a standby drive, and the drive group has been configured into two +logical drives, one RAID-5 and one RAID-6. Note that these logs are from an +earlier version of the driver and the messages have changed somewhat with newer +releases, but the functionality remains similar. First, here is the current +status of the RAID configuration: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status +***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PJ PCI RAID Controller + Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB + PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned + PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Standby, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +gwynedd:/u/lnz# cat /proc/rd/status +OK + +The above messages indicate that everything is healthy, and /proc/rd/status +returns "OK" indicating that there are no problems with any DAC960 controller +in the system. For demonstration purposes, while I/O is active Physical Drive +1:2 is now disconnected, simulating a drive failure. The failure is noted by +the driver within 10 seconds of the controller's having detected it, and the +driver logs the following console status messages: + +DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command +DAC960#0: Physical Drive 1:2 is now DEAD +DAC960#0: Physical Drive 1:2 killed because it was removed +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL + +Since a standby drive is configured, the controller automatically begins +rebuilding onto the standby drive: + +DAC960#0: Physical Drive 1:3 is now WRITE-ONLY +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed + +Concurrently with the above, the driver status available from /proc/rd also +reflects the drive failure and automatic rebuild. The status message in +/proc/rd/status has changed from "OK" to "ALERT": + +gwynedd:/u/lnz# cat /proc/rd/status +ALERT + +and /proc/rd/c0/current_status has been updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Dead, 2201600 blocks + 1:3 - Disk: Write-Only, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed + +As the rebuild progresses, the current status in /proc/rd/c0/current_status is +updated every 10 seconds: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Dead, 2201600 blocks + 1:3 - Disk: Write-Only, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed + +and every minute a progress message is logged on the console by the driver: + +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed +DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed +DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed + +Finally, the rebuild completes successfully. The driver logs the status of the +logical and physical drives and the rebuild completion: + +DAC960#0: Rebuild Completed Successfully +DAC960#0: Physical Drive 1:3 is now ONLINE +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE + +/proc/rd/c0/current_status is updated: + +***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PJ PCI RAID Controller + Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB + PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned + PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Dead, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru + Rebuild Completed Successfully + +and /proc/rd/status indicates that everything is healthy once again: + +gwynedd:/u/lnz# cat /proc/rd/status +OK + +Note that the absence of a viable standby drive does not create an "ALERT" +status. Once dead Physical Drive 1:2 has been replaced, the controller must be +told that this has occurred and that the newly replaced drive should become the +new standby drive: + +gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command +gwynedd:/u/lnz# cat /proc/rd/c0/user_command +Make Standby of Physical Drive 1:2 Succeeded + +The echo command instructs the controller to make Physical Drive 1:2 into a +standby drive, and the status message that results from the operation is then +available for reading from /proc/rd/c0/user_command, as well as being logged to +the console by the driver. Within 60 seconds of this command the driver logs: + +DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 +DAC960#0: Physical Drive 1:2 is now STANDBY +DAC960#0: Make Standby of Physical Drive 1:2 Succeeded + +and /proc/rd/c0/current_status is updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Standby, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru + Rebuild Completed Successfully diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt new file mode 100644 index 000000000000..89698e8df7d4 --- /dev/null +++ b/Documentation/blockdev/cciss.txt @@ -0,0 +1,171 @@ +This driver is for Compaq's SMART Array Controllers. + +Supported Cards: +---------------- + +This driver is known to work with the following cards: + + * SA 5300 + * SA 5i + * SA 532 + * SA 5312 + * SA 641 + * SA 642 + * SA 6400 + * SA 6400 U320 Expansion Module + * SA 6i + * SA P600 + * SA P800 + * SA E400 + * SA P400i + * SA E200 + * SA E200i + * SA E500 + * SA P700m + * SA P212 + * SA P410 + * SA P410i + * SA P411 + * SA P812 + * SA P712m + * SA P711m + +Detecting drive failures: +------------------------- + +To get the status of logical volumes and to detect physical drive +failures, you can use the cciss_vol_status program found here: +http://cciss.sourceforge.net/#cciss_utils + +Device Naming: +-------------- + +If nodes are not already created in the /dev/cciss directory, run as root: + +# cd /dev +# ./MAKEDEV cciss + +You need some entries in /dev for the cciss device. The MAKEDEV script +can make device nodes for you automatically. Currently the device setup +is as follows: + +Major numbers: + 104 cciss0 + 105 cciss1 + 106 cciss2 + 105 cciss3 + 108 cciss4 + 109 cciss5 + 110 cciss6 + 111 cciss7 + +Minor numbers: + b7 b6 b5 b4 b3 b2 b1 b0 + |----+----| |----+----| + | | + | +-------- Partition ID (0=wholedev, 1-15 partition) + | + +-------------------- Logical Volume number + +The device naming scheme is: +/dev/cciss/c0d0 Controller 0, disk 0, whole device +/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1 +/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2 +/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3 + +/dev/cciss/c1d1 Controller 1, disk 1, whole device +/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1 +/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2 +/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3 + +SCSI tape drive and medium changer support +------------------------------------------ + +SCSI sequential access devices and medium changer devices are supported and +appropriate device nodes are automatically created. (e.g. +/dev/st0, /dev/st1, etc. See the "st" man page for more details.) +You must enable "SCSI tape drive support for Smart Array 5xxx" and +"SCSI support" in your kernel configuration to be able to use SCSI +tape drives with your Smart Array 5xxx controller. + +Additionally, note that the driver will not engage the SCSI core at init +time. The driver must be directed to dynamically engage the SCSI core via +the /proc filesystem entry which the "block" side of the driver creates as +/proc/driver/cciss/cciss* at runtime. This is because at driver init time, +the SCSI core may not yet be initialized (because the driver is a block +driver) and attempting to register it with the SCSI core in such a case +would cause a hang. This is best done via an initialization script +(typically in /etc/init.d, but could vary depending on distribution). +For example: + + for x in /proc/driver/cciss/cciss[0-9]* + do + echo "engage scsi" > $x + done + +Once the SCSI core is engaged by the driver, it cannot be disengaged +(except by unloading the driver, if it happens to be linked as a module.) + +Note also that if no sequential access devices or medium changers are +detected, the SCSI core will not be engaged by the action of the above +script. + +Hot plug support for SCSI tape drives +------------------------------------- + +Hot plugging of SCSI tape drives is supported, with some caveats. +The cciss driver must be informed that changes to the SCSI bus +have been made. This may be done via the /proc filesystem. +For example: + + echo "rescan" > /proc/scsi/cciss0/1 + +This causes the driver to query the adapter about changes to the +physical SCSI buses and/or fibre channel arbitrated loop and the +driver to make note of any new or removed sequential access devices +or medium changers. The driver will output messages indicating what +devices have been added or removed and the controller, bus, target and +lun used to address the device. It then notifies the SCSI mid layer +of these changes. + +Note that the naming convention of the /proc filesystem entries +contains a number in addition to the driver name. (E.g. "cciss0" +instead of just "cciss" which you might expect.) + +Note: ONLY sequential access devices and medium changers are presented +as SCSI devices to the SCSI mid layer by the cciss driver. Specifically, +physical SCSI disk drives are NOT presented to the SCSI mid layer. The +physical SCSI disk drives are controlled directly by the array controller +hardware and it is important to prevent the kernel from attempting to directly +access these devices too, as if the array controller were merely a SCSI +controller in the same way that we are allowing it to access SCSI tape drives. + +SCSI error handling for tape drives and medium changers +------------------------------------------------------- + +The linux SCSI mid layer provides an error handling protocol which +kicks into gear whenever a SCSI command fails to complete within a +certain amount of time (which can vary depending on the command). +The cciss driver participates in this protocol to some extent. The +normal protocol is a four step process. First the device is told +to abort the command. If that doesn't work, the device is reset. +If that doesn't work, the SCSI bus is reset. If that doesn't work +the host bus adapter is reset. Because the cciss driver is a block +driver as well as a SCSI driver and only the tape drives and medium +changers are presented to the SCSI mid layer, and unlike more +straightforward SCSI drivers, disk i/o continues through the block +side during the SCSI error recovery process, the cciss driver only +implements the first two of these actions, aborting the command, and +resetting the device. Additionally, most tape drives will not oblige +in aborting commands, and sometimes it appears they will not even +obey a reset command, though in most circumstances they will. In +the case that the command cannot be aborted and the device cannot be +reset, the device will be set offline. + +In the event the error handling code is triggered and a tape drive is +successfully reset or the tardy command is successfully aborted, the +tape drive may still not allow i/o to continue until some command +is issued which positions the tape to a known position. Typically you +must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example) +before i/o can proceed again to a tape drive which was reset. + diff --git a/Documentation/blockdev/cpqarray.txt b/Documentation/blockdev/cpqarray.txt new file mode 100644 index 000000000000..c7154e20ef5e --- /dev/null +++ b/Documentation/blockdev/cpqarray.txt @@ -0,0 +1,93 @@ +This driver is for Compaq's SMART2 Intelligent Disk Array Controllers. + +Supported Cards: +---------------- + +This driver is known to work with the following cards: + + * SMART (EISA) + * SMART-2/E (EISA) + * SMART-2/P + * SMART-2DH + * SMART-2SL + * SMART-221 + * SMART-3100ES + * SMART-3200 + * Integrated Smart Array Controller + * SA 4200 + * SA 4250ES + * SA 431 + * RAID LC2 Controller + +It should also work with some really old Disk array adapters, but I am +unable to test against these cards: + + * IDA + * IDA-2 + * IAES + + +EISA Controllers: +----------------- + +If you want to use an EISA controller you'll have to supply some +modprobe/lilo parameters. If the driver is compiled into the kernel, must +give it the controller's IO port address at boot time (it is not +necessary to specify the IRQ). For example, if you had two SMART-2/E +controllers, in EISA slots 1 and 2 you'd give it a boot argument like +this: + + smart2=0x1000,0x2000 + +If you were loading the driver as a module, you'd give load it like this: + + modprobe cpqarray eisa=0x1000,0x2000 + +You can use EISA and PCI adapters at the same time. + + +Device Naming: +-------------- + +You need some entries in /dev for the ida device. MAKEDEV in the /dev +directory can make device nodes for you automatically. The device setup is +as follows: + +Major numbers: + 72 ida0 + 73 ida1 + 74 ida2 + 75 ida3 + 76 ida4 + 77 ida5 + 78 ida6 + 79 ida7 + +Minor numbers: + b7 b6 b5 b4 b3 b2 b1 b0 + |----+----| |----+----| + | | + | +-------- Partition ID (0=wholedev, 1-15 partition) + | + +-------------------- Logical Volume number + +The device naming scheme is: +/dev/ida/c0d0 Controller 0, disk 0, whole device +/dev/ida/c0d0p1 Controller 0, disk 0, partition 1 +/dev/ida/c0d0p2 Controller 0, disk 0, partition 2 +/dev/ida/c0d0p3 Controller 0, disk 0, partition 3 + +/dev/ida/c1d1 Controller 1, disk 1, whole device +/dev/ida/c1d1p1 Controller 1, disk 1, partition 1 +/dev/ida/c1d1p2 Controller 1, disk 1, partition 2 +/dev/ida/c1d1p3 Controller 1, disk 1, partition 3 + + +Changelog: +========== + +10-28-2004 : General cleanup, syntax fixes for in-kernel driver version. + James Nelson + + +1999 : Original Document diff --git a/Documentation/blockdev/floppy.txt b/Documentation/blockdev/floppy.txt new file mode 100644 index 000000000000..6ccab88705cb --- /dev/null +++ b/Documentation/blockdev/floppy.txt @@ -0,0 +1,245 @@ +This file describes the floppy driver. + +FAQ list: +========= + + A FAQ list may be found in the fdutils package (see below), and also +at . + + +LILO configuration options (Thinkpad users, read this) +====================================================== + + The floppy driver is configured using the 'floppy=' option in +lilo. This option can be typed at the boot prompt, or entered in the +lilo configuration file. + + Example: If your kernel is called linux-2.6.9, type the following line +at the lilo boot prompt (if you have a thinkpad): + + linux-2.6.9 floppy=thinkpad + +You may also enter the following line in /etc/lilo.conf, in the description +of linux-2.6.9: + + append = "floppy=thinkpad" + + Several floppy related options may be given, example: + + linux-2.6.9 floppy=daring floppy=two_fdc + append = "floppy=daring floppy=two_fdc" + + If you give options both in the lilo config file and on the boot +prompt, the option strings of both places are concatenated, the boot +prompt options coming last. That's why there are also options to +restore the default behavior. + + +Module configuration options +============================ + + If you use the floppy driver as a module, use the following syntax: +modprobe floppy + +Example: + modprobe floppy omnibook messages + + If you need certain options enabled every time you load the floppy driver, +you can put: + + options floppy omnibook messages + +in /etc/modprobe.conf. + + + The floppy driver related options are: + + floppy=asus_pci + Sets the bit mask to allow only units 0 and 1. (default) + + floppy=daring + Tells the floppy driver that you have a well behaved floppy controller. + This allows more efficient and smoother operation, but may fail on + certain controllers. This may speed up certain operations. + + floppy=0,daring + Tells the floppy driver that your floppy controller should be used + with caution. + + floppy=one_fdc + Tells the floppy driver that you have only one floppy controller. + (default) + + floppy=two_fdc + floppy=
,two_fdc + Tells the floppy driver that you have two floppy controllers. + The second floppy controller is assumed to be at
. + This option is not needed if the second controller is at address + 0x370, and if you use the 'cmos' option. + + floppy=thinkpad + Tells the floppy driver that you have a Thinkpad. Thinkpads use an + inverted convention for the disk change line. + + floppy=0,thinkpad + Tells the floppy driver that you don't have a Thinkpad. + + floppy=omnibook + floppy=nodma + Tells the floppy driver not to use Dma for data transfers. + This is needed on HP Omnibooks, which don't have a workable + DMA channel for the floppy driver. This option is also useful + if you frequently get "Unable to allocate DMA memory" messages. + Indeed, dma memory needs to be continuous in physical memory, + and is thus harder to find, whereas non-dma buffers may be + allocated in virtual memory. However, I advise against this if + you have an FDC without a FIFO (8272A or 82072). 82072A and + later are OK. You also need at least a 486 to use nodma. + If you use nodma mode, I suggest you also set the FIFO + threshold to 10 or lower, in order to limit the number of data + transfer interrupts. + + If you have a FIFO-able FDC, the floppy driver automatically + falls back on non DMA mode if no DMA-able memory can be found. + If you want to avoid this, explicitly ask for 'yesdma'. + + floppy=yesdma + Tells the floppy driver that a workable DMA channel is available. + (default) + + floppy=nofifo + Disables the FIFO entirely. This is needed if you get "Bus + master arbitration error" messages from your Ethernet card (or + from other devices) while accessing the floppy. + + floppy=usefifo + Enables the FIFO. (default) + + floppy=,fifo_depth + Sets the FIFO threshold. This is mostly relevant in DMA + mode. If this is higher, the floppy driver tolerates more + interrupt latency, but it triggers more interrupts (i.e. it + imposes more load on the rest of the system). If this is + lower, the interrupt latency should be lower too (faster + processor). The benefit of a lower threshold is less + interrupts. + + To tune the fifo threshold, switch on over/underrun messages + using 'floppycontrol --messages'. Then access a floppy + disk. If you get a huge amount of "Over/Underrun - retrying" + messages, then the fifo threshold is too low. Try with a + higher value, until you only get an occasional Over/Underrun. + It is a good idea to compile the floppy driver as a module + when doing this tuning. Indeed, it allows to try different + fifo values without rebooting the machine for each test. Note + that you need to do 'floppycontrol --messages' every time you + re-insert the module. + + Usually, tuning the fifo threshold should not be needed, as + the default (0xa) is reasonable. + + floppy=,,cmos + Sets the CMOS type of to . This is mandatory if + you have more than two floppy drives (only two can be + described in the physical CMOS), or if your BIOS uses + non-standard CMOS types. The CMOS types are: + + 0 - Use the value of the physical CMOS + 1 - 5 1/4 DD + 2 - 5 1/4 HD + 3 - 3 1/2 DD + 4 - 3 1/2 HD + 5 - 3 1/2 ED + 6 - 3 1/2 ED + 16 - unknown or not installed + + (Note: there are two valid types for ED drives. This is because 5 was + initially chosen to represent floppy *tapes*, and 6 for ED drives. + AMI ignored this, and used 5 for ED drives. That's why the floppy + driver handles both.) + + floppy=unexpected_interrupts + Print a warning message when an unexpected interrupt is received. + (default) + + floppy=no_unexpected_interrupts + floppy=L40SX + Don't print a message when an unexpected interrupt is received. This + is needed on IBM L40SX laptops in certain video modes. (There seems + to be an interaction between video and floppy. The unexpected + interrupts affect only performance, and can be safely ignored.) + + floppy=broken_dcl + Don't use the disk change line, but assume that the disk was + changed whenever the device node is reopened. Needed on some + boxes where the disk change line is broken or unsupported. + This should be regarded as a stopgap measure, indeed it makes + floppy operation less efficient due to unneeded cache + flushings, and slightly more unreliable. Please verify your + cable, connection and jumper settings if you have any DCL + problems. However, some older drives, and also some laptops + are known not to have a DCL. + + floppy=debug + Print debugging messages. + + floppy=messages + Print informational messages for some operations (disk change + notifications, warnings about over and underruns, and about + autodetection). + + floppy=silent_dcl_clear + Uses a less noisy way to clear the disk change line (which + doesn't involve seeks). Implied by 'daring' option. + + floppy=,irq + Sets the floppy IRQ to instead of 6. + + floppy=,dma + Sets the floppy DMA channel to instead of 2. + + floppy=slow + Use PS/2 stepping rate: + " PS/2 floppies have much slower step rates than regular floppies. + It's been recommended that take about 1/4 of the default speed + in some more extreme cases." + + +Supporting utilities and additional documentation: +================================================== + + Additional parameters of the floppy driver can be configured at +runtime. Utilities which do this can be found in the fdutils package. +This package also contains a new version of mtools which allows to +access high capacity disks (up to 1992K on a high density 3 1/2 disk!). +It also contains additional documentation about the floppy driver. + +The latest version can be found at fdutils homepage: + http://fdutils.linux.lu + +The fdutils releases can be found at: + http://fdutils.linux.lu/download.html + http://www.tux.org/pub/knaff/fdutils/ + ftp://metalab.unc.edu/pub/Linux/utils/disk-management/ + +Reporting problems about the floppy driver +========================================== + + If you have a question or a bug report about the floppy driver, mail +me at Alain.Knaff@poboxes.com . If you post to Usenet, preferably use +comp.os.linux.hardware. As the volume in these groups is rather high, +be sure to include the word "floppy" (or "FLOPPY") in the subject +line. If the reported problem happens when mounting floppy disks, be +sure to mention also the type of the filesystem in the subject line. + + Be sure to read the FAQ before mailing/posting any bug reports! + + Alain + +Changelog +========= + +10-30-2004 : Cleanup, updating, add reference to module configuration. + James Nelson + +6-3-2000 : Original Document diff --git a/Documentation/blockdev/nbd.txt b/Documentation/blockdev/nbd.txt new file mode 100644 index 000000000000..aeb93ffe6416 --- /dev/null +++ b/Documentation/blockdev/nbd.txt @@ -0,0 +1,47 @@ + Network Block Device (TCP version) + + What is it: With this compiled in the kernel (or as a module), Linux + can use a remote server as one of its block devices. So every time + the client computer wants to read, e.g., /dev/nb0, it sends a + request over TCP to the server, which will reply with the data read. + This can be used for stations with low disk space (or even diskless - + if you boot from floppy) to borrow disk space from another computer. + Unlike NFS, it is possible to put any filesystem on it, etc. It should + even be possible to use NBD as a root filesystem (I've never tried), + but it requires a user-level program to be in the initrd to start. + It also allows you to run block-device in user land (making server + and client physically the same computer, communicating using loopback). + + Current state: It currently works. Network block device is stable. + I originally thought that it was impossible to swap over TCP. It + turned out not to be true - swapping over TCP now works and seems + to be deadlock-free, but it requires heavy patches into Linux's + network layer. + + For more information, or to download the nbd-client and nbd-server + tools, go to http://nbd.sf.net/. + + Howto: To setup nbd, you can simply do the following: + + First, serve a device or file from a remote server: + + nbd-server + + e.g., + root@server1 # nbd-server 1234 /dev/sdb1 + + (serves sdb1 partition on TCP port 1234) + + Then, on the local (client) system: + + nbd-client /dev/nb[0-n] + + e.g., + root@client1 # nbd-client server1 1234 /dev/nb0 + + (creates the nb0 device on client1) + + The nbd kernel module need only be installed on the client + system, as the nbd-server is completely in userspace. In fact, + the nbd-server has been successfully ported to other operating + systems, including Windows. diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt new file mode 100644 index 000000000000..e4312676bdda --- /dev/null +++ b/Documentation/blockdev/paride.txt @@ -0,0 +1,417 @@ + + Linux and parallel port IDE devices + +PARIDE v1.03 (c) 1997-8 Grant Guenther + +1. Introduction + +Owing to the simplicity and near universality of the parallel port interface +to personal computers, many external devices such as portable hard-disk, +CD-ROM, LS-120 and tape drives use the parallel port to connect to their +host computer. While some devices (notably scanners) use ad-hoc methods +to pass commands and data through the parallel port interface, most +external devices are actually identical to an internal model, but with +a parallel-port adapter chip added in. Some of the original parallel port +adapters were little more than mechanisms for multiplexing a SCSI bus. +(The Iomega PPA-3 adapter used in the ZIP drives is an example of this +approach). Most current designs, however, take a different approach. +The adapter chip reproduces a small ISA or IDE bus in the external device +and the communication protocol provides operations for reading and writing +device registers, as well as data block transfer functions. Sometimes, +the device being addressed via the parallel cable is a standard SCSI +controller like an NCR 5380. The "ditto" family of external tape +drives use the ISA replicator to interface a floppy disk controller, +which is then connected to a floppy-tape mechanism. The vast majority +of external parallel port devices, however, are now based on standard +IDE type devices, which require no intermediate controller. If one +were to open up a parallel port CD-ROM drive, for instance, one would +find a standard ATAPI CD-ROM drive, a power supply, and a single adapter +that interconnected a standard PC parallel port cable and a standard +IDE cable. It is usually possible to exchange the CD-ROM device with +any other device using the IDE interface. + +The document describes the support in Linux for parallel port IDE +devices. It does not cover parallel port SCSI devices, "ditto" tape +drives or scanners. Many different devices are supported by the +parallel port IDE subsystem, including: + + MicroSolutions backpack CD-ROM + MicroSolutions backpack PD/CD + MicroSolutions backpack hard-drives + MicroSolutions backpack 8000t tape drive + SyQuest EZ-135, EZ-230 & SparQ drives + Avatar Shark + Imation Superdisk LS-120 + Maxell Superdisk LS-120 + FreeCom Power CD + Hewlett-Packard 5GB and 8GB tape drives + Hewlett-Packard 7100 and 7200 CD-RW drives + +as well as most of the clone and no-name products on the market. + +To support such a wide range of devices, PARIDE, the parallel port IDE +subsystem, is actually structured in three parts. There is a base +paride module which provides a registry and some common methods for +accessing the parallel ports. The second component is a set of +high-level drivers for each of the different types of supported devices: + + pd IDE disk + pcd ATAPI CD-ROM + pf ATAPI disk + pt ATAPI tape + pg ATAPI generic + +(Currently, the pg driver is only used with CD-R drives). + +The high-level drivers function according to the relevant standards. +The third component of PARIDE is a set of low-level protocol drivers +for each of the parallel port IDE adapter chips. Thanks to the interest +and encouragement of Linux users from many parts of the world, +support is available for almost all known adapter protocols: + + aten ATEN EH-100 (HK) + bpck Microsolutions backpack (US) + comm DataStor (old-type) "commuter" adapter (TW) + dstr DataStor EP-2000 (TW) + epat Shuttle EPAT (UK) + epia Shuttle EPIA (UK) + fit2 FIT TD-2000 (US) + fit3 FIT TD-3000 (US) + friq Freecom IQ cable (DE) + frpw Freecom Power (DE) + kbic KingByte KBIC-951A and KBIC-971A (TW) + ktti KT Technology PHd adapter (SG) + on20 OnSpec 90c20 (US) + on26 OnSpec 90c26 (US) + + +2. Using the PARIDE subsystem + +While configuring the Linux kernel, you may choose either to build +the PARIDE drivers into your kernel, or to build them as modules. + +In either case, you will need to select "Parallel port IDE device support" +as well as at least one of the high-level drivers and at least one +of the parallel port communication protocols. If you do not know +what kind of parallel port adapter is used in your drive, you could +begin by checking the file names and any text files on your DOS +installation floppy. Alternatively, you can look at the markings on +the adapter chip itself. That's usually sufficient to identify the +correct device. + +You can actually select all the protocol modules, and allow the PARIDE +subsystem to try them all for you. + +For the "brand-name" products listed above, here are the protocol +and high-level drivers that you would use: + + Manufacturer Model Driver Protocol + + MicroSolutions CD-ROM pcd bpck + MicroSolutions PD drive pf bpck + MicroSolutions hard-drive pd bpck + MicroSolutions 8000t tape pt bpck + SyQuest EZ, SparQ pd epat + Imation Superdisk pf epat + Maxell Superdisk pf friq + Avatar Shark pd epat + FreeCom CD-ROM pcd frpw + Hewlett-Packard 5GB Tape pt epat + Hewlett-Packard 7200e (CD) pcd epat + Hewlett-Packard 7200e (CD-R) pg epat + +2.1 Configuring built-in drivers + +We recommend that you get to know how the drivers work and how to +configure them as loadable modules, before attempting to compile a +kernel with the drivers built-in. + +If you built all of your PARIDE support directly into your kernel, +and you have just a single parallel port IDE device, your kernel should +locate it automatically for you. If you have more than one device, +you may need to give some command line options to your bootloader +(eg: LILO), how to do that is beyond the scope of this document. + +The high-level drivers accept a number of command line parameters, all +of which are documented in the source files in linux/drivers/block/paride. +By default, each driver will automatically try all parallel ports it +can find, and all protocol types that have been installed, until it finds +a parallel port IDE adapter. Once it finds one, the probe stops. So, +if you have more than one device, you will need to tell the drivers +how to identify them. This requires specifying the port address, the +protocol identification number and, for some devices, the drive's +chain ID. While your system is booting, a number of messages are +displayed on the console. Like all such messages, they can be +reviewed with the 'dmesg' command. Among those messages will be +some lines like: + + paride: bpck registered as protocol 0 + paride: epat registered as protocol 1 + +The numbers will always be the same until you build a new kernel with +different protocol selections. You should note these numbers as you +will need them to identify the devices. + +If you happen to be using a MicroSolutions backpack device, you will +also need to know the unit ID number for each drive. This is usually +the last two digits of the drive's serial number (but read MicroSolutions' +documentation about this). + +As an example, let's assume that you have a MicroSolutions PD/CD drive +with unit ID number 36 connected to the parallel port at 0x378, a SyQuest +EZ-135 connected to the chained port on the PD/CD drive and also an +Imation Superdisk connected to port 0x278. You could give the following +options on your boot command: + + pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36 + +In the last option, pf.drive1 configures device /dev/pf1, the 0x378 +is the parallel port base address, the 0 is the protocol registration +number and 36 is the chain ID. + +Please note: while PARIDE will work both with and without the +PARPORT parallel port sharing system that is included by the +"Parallel port support" option, PARPORT must be included and enabled +if you want to use chains of devices on the same parallel port. + +2.2 Loading and configuring PARIDE as modules + +It is much faster and simpler to get to understand the PARIDE drivers +if you use them as loadable kernel modules. + +Note 1: using these drivers with the "kerneld" automatic module loading +system is not recommended for beginners, and is not documented here. + +Note 2: if you build PARPORT support as a loadable module, PARIDE must +also be built as loadable modules, and PARPORT must be loaded before the +PARIDE modules. + +To use PARIDE, you must begin by + + insmod paride + +this loads a base module which provides a registry for the protocols, +among other tasks. + +Then, load as many of the protocol modules as you think you might need. +As you load each module, it will register the protocols that it supports, +and print a log message to your kernel log file and your console. For +example: + + # insmod epat + paride: epat registered as protocol 0 + # insmod kbic + paride: k951 registered as protocol 1 + paride: k971 registered as protocol 2 + +Finally, you can load high-level drivers for each kind of device that +you have connected. By default, each driver will autoprobe for a single +device, but you can support up to four similar devices by giving their +individual co-ordinates when you load the driver. + +For example, if you had two no-name CD-ROM drives both using the +KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc +you could give the following command: + + # insmod pcd drive0=0x378,1 drive1=0x3bc,1 + +For most adapters, giving a port address and protocol number is sufficient, +but check the source files in linux/drivers/block/paride for more +information. (Hopefully someone will write some man pages one day !). + +As another example, here's what happens when PARPORT is installed, and +a SyQuest EZ-135 is attached to port 0x378: + + # insmod paride + paride: version 1.0 installed + # insmod epat + paride: epat registered as protocol 0 + # insmod pd + pd: pd version 1.0, major 45, cluster 64, nice 0 + pda: Sharing parport1 at 0x378 + pda: epat 1.0, Shuttle EPAT chip c3 at 0x378, mode 5 (EPP-32), delay 1 + pda: SyQuest EZ135A, 262144 blocks [128M], (512/16/32), removable media + pda: pda1 + +Note that the last line is the output from the generic partition table +scanner - in this case it reports that it has found a disk with one partition. + +2.3 Using a PARIDE device + +Once the drivers have been loaded, you can access PARIDE devices in the +same way as their traditional counterparts. You will probably need to +create the device "special files". Here is a simple script that you can +cut to a file and execute: + +#!/bin/bash +# +# mkd -- a script to create the device special files for the PARIDE subsystem +# +function mkdev { + mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1 +} +# +function pd { + D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) ) + mkdev pd$D b 45 $[ $1 * 16 ] + for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + do mkdev pd$D$P b 45 $[ $1 * 16 + $P ] + done +} +# +cd /dev +# +for u in 0 1 2 3 ; do pd $u ; done +for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done +for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done +for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done +for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done +for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done +# +# end of mkd + +With the device files and drivers in place, you can access PARIDE devices +like any other Linux device. For example, to mount a CD-ROM in pcd0, use: + + mount /dev/pcd0 /cdrom + +If you have a fresh Avatar Shark cartridge, and the drive is pda, you +might do something like: + + fdisk /dev/pda -- make a new partition table with + partition 1 of type 83 + + mke2fs /dev/pda1 -- to build the file system + + mkdir /shark -- make a place to mount the disk + + mount /dev/pda1 /shark + +Devices like the Imation superdisk work in the same way, except that +they do not have a partition table. For example to make a 120MB +floppy that you could share with a DOS system: + + mkdosfs /dev/pf0 + mount /dev/pf0 /mnt + + +2.4 The pf driver + +The pf driver is intended for use with parallel port ATAPI disk +devices. The most common devices in this category are PD drives +and LS-120 drives. Traditionally, media for these devices are not +partitioned. Consequently, the pf driver does not support partitioned +media. This may be changed in a future version of the driver. + +2.5 Using the pt driver + +The pt driver for parallel port ATAPI tape drives is a minimal driver. +It does not yet support many of the standard tape ioctl operations. +For best performance, a block size of 32KB should be used. You will +probably want to set the parallel port delay to 0, if you can. + +2.6 Using the pg driver + +The pg driver can be used in conjunction with the cdrecord program +to create CD-ROMs. Please get cdrecord version 1.6.1 or later +from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ . To record CD-R media +your parallel port should ideally be set to EPP mode, and the "port delay" +should be set to 0. With those settings it is possible to record at 2x +speed without any buffer underruns. If you cannot get the driver to work +in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only. + + +3. Troubleshooting + +3.1 Use EPP mode if you can + +The most common problems that people report with the PARIDE drivers +concern the parallel port CMOS settings. At this time, none of the +PARIDE protocol modules support ECP mode, or any ECP combination modes. +If you are able to do so, please set your parallel port into EPP mode +using your CMOS setup procedure. + +3.2 Check the port delay + +Some parallel ports cannot reliably transfer data at full speed. To +offset the errors, the PARIDE protocol modules introduce a "port +delay" between each access to the i/o ports. Each protocol sets +a default value for this delay. In most cases, the user can override +the default and set it to 0 - resulting in somewhat higher transfer +rates. In some rare cases (especially with older 486 systems) the +default delays are not long enough. if you experience corrupt data +transfers, or unexpected failures, you may wish to increase the +port delay. The delay can be programmed using the "driveN" parameters +to each of the high-level drivers. Please see the notes above, or +read the comments at the beginning of the driver source files in +linux/drivers/block/paride. + +3.3 Some drives need a printer reset + +There appear to be a number of "noname" external drives on the market +that do not always power up correctly. We have noticed this with some +drives based on OnSpec and older Freecom adapters. In these rare cases, +the adapter can often be reinitialised by issuing a "printer reset" on +the parallel port. As the reset operation is potentially disruptive in +multiple device environments, the PARIDE drivers will not do it +automatically. You can however, force a printer reset by doing: + + insmod lp reset=1 + rmmod lp + +If you have one of these marginal cases, you should probably build +your paride drivers as modules, and arrange to do the printer reset +before loading the PARIDE drivers. + +3.4 Use the verbose option and dmesg if you need help + +While a lot of testing has gone into these drivers to make them work +as smoothly as possible, problems will arise. If you do have problems, +please check all the obvious things first: does the drive work in +DOS with the manufacturer's drivers ? If that doesn't yield any useful +clues, then please make sure that only one drive is hooked to your system, +and that either (a) PARPORT is enabled or (b) no other device driver +is using your parallel port (check in /proc/ioports). Then, load the +appropriate drivers (you can load several protocol modules if you want) +as in: + + # insmod paride + # insmod epat + # insmod bpck + # insmod kbic + ... + # insmod pd verbose=1 + +(using the correct driver for the type of device you have, of course). +The verbose=1 parameter will cause the drivers to log a trace of their +activity as they attempt to locate your drive. + +Use 'dmesg' to capture a log of all the PARIDE messages (any messages +beginning with paride:, a protocol module's name or a driver's name) and +include that with your bug report. You can submit a bug report in one +of two ways. Either send it directly to the author of the PARIDE suite, +by e-mail to grant@torque.net, or join the linux-parport mailing list +and post your report there. + +3.5 For more information or help + +You can join the linux-parport mailing list by sending a mail message +to + linux-parport-request@torque.net + +with the single word + + subscribe + +in the body of the mail message (not in the subject line). Please be +sure that your mail program is correctly set up when you do this, as +the list manager is a robot that will subscribe you using the reply +address in your mail headers. REMOVE any anti-spam gimmicks you may +have in your mail headers, when sending mail to the list server. + +You might also find some useful information on the linux-parport +web pages (although they are not always up to date) at + + http://www.torque.net/parport/ + + diff --git a/Documentation/blockdev/ramdisk.txt b/Documentation/blockdev/ramdisk.txt new file mode 100644 index 000000000000..6c820baa19a6 --- /dev/null +++ b/Documentation/blockdev/ramdisk.txt @@ -0,0 +1,165 @@ +Using the RAM disk block device with Linux +------------------------------------------ + +Contents: + + 1) Overview + 2) Kernel Command Line Parameters + 3) Using "rdev -r" + 4) An Example of Creating a Compressed RAM Disk + + +1) Overview +----------- + +The RAM disk driver is a way to use main system memory as a block device. It +is required for initrd, an initial filesystem used if you need to load modules +in order to access the root filesystem (see Documentation/initrd.txt). It can +also be used for a temporary filesystem for crypto work, since the contents +are erased on reboot. + +The RAM disk dynamically grows as more space is required. It does this by using +RAM from the buffer cache. The driver marks the buffers it is using as dirty +so that the VM subsystem does not try to reclaim them later. + +The RAM disk supports up to 16 RAM disks by default, and can be reconfigured +to support an unlimited number of RAM disks (at your own risk). Just change +the configuration symbol BLK_DEV_RAM_COUNT in the Block drivers config menu +and (re)build the kernel. + +To use RAM disk support with your system, run './MAKEDEV ram' from the /dev +directory. RAM disks are all major number 1, and start with minor number 0 +for /dev/ram0, etc. If used, modern kernels use /dev/ram0 for an initrd. + +The new RAM disk also has the ability to load compressed RAM disk images, +allowing one to squeeze more programs onto an average installation or +rescue floppy disk. + + +2) Kernel Command Line Parameters +--------------------------------- + + ramdisk_size=N + ============== + +This parameter tells the RAM disk driver to set up RAM disks of N k size. The +default is 4096 (4 MB) (8192 (8 MB) on S390). + + ramdisk_blocksize=N + =================== + +This parameter tells the RAM disk driver how many bytes to use per block. The +default is 1024 (BLOCK_SIZE). + + +3) Using "rdev -r" +------------------ + +The usage of the word (two bytes) that "rdev -r" sets in the kernel image is +as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up +to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit +14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a +prompt/wait sequence is to be given before trying to read the RAM disk. Since +the RAM disk dynamically grows as data is being written into it, a size field +is not required. Bits 11 to 13 are not currently used and may as well be zero. +These numbers are no magical secrets, as seen below: + +./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF +./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 +./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 + +Consider a typical two floppy disk setup, where you will have the +kernel on disk one, and have already put a RAM disk image onto disk #2. + +Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk +starts at an offset of 0 kB from the beginning of the floppy. +The command line equivalent is: "ramdisk_start=0" + +You want bit 14 as one, indicating that a RAM disk is to be loaded. +The command line equivalent is: "load_ramdisk=1" + +You want bit 15 as one, indicating that you want a prompt/keypress +sequence so that you have a chance to switch floppy disks. +The command line equivalent is: "prompt_ramdisk=1" + +Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word. +So to create disk one of the set, you would do: + + /usr/src/linux# cat arch/i386/boot/zImage > /dev/fd0 + /usr/src/linux# rdev /dev/fd0 /dev/fd0 + /usr/src/linux# rdev -r /dev/fd0 49152 + +If you make a boot disk that has LILO, then for the above, you would use: + append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1" +Since the default start = 0 and the default prompt = 1, you could use: + append = "load_ramdisk=1" + + +4) An Example of Creating a Compressed RAM Disk +---------------------------------------------- + +To create a RAM disk image, you will need a spare block device to +construct it on. This can be the RAM disk device itself, or an +unused disk partition (such as an unmounted swap partition). For this +example, we will use the RAM disk device, "/dev/ram0". + +Note: This technique should not be done on a machine with less than 8 MB +of RAM. If using a spare disk partition instead of /dev/ram0, then this +restriction does not apply. + +a) Decide on the RAM disk size that you want. Say 2 MB for this example. + Create it by writing to the RAM disk device. (This step is not currently + required, but may be in the future.) It is wise to zero out the + area (esp. for disks) so that maximal compression is achieved for + the unused blocks of the image that you are about to create. + + dd if=/dev/zero of=/dev/ram0 bs=1k count=2048 + +b) Make a filesystem on it. Say ext2fs for this example. + + mke2fs -vm0 /dev/ram0 2048 + +c) Mount it, copy the files you want to it (eg: /etc/* /dev/* ...) + and unmount it again. + +d) Compress the contents of the RAM disk. The level of compression + will be approximately 50% of the space used by the files. Unused + space on the RAM disk will compress to almost nothing. + + dd if=/dev/ram0 bs=1k count=2048 | gzip -v9 > /tmp/ram_image.gz + +e) Put the kernel onto the floppy + + dd if=zImage of=/dev/fd0 bs=1k + +f) Put the RAM disk image onto the floppy, after the kernel. Use an offset + that is slightly larger than the kernel, so that you can put another + (possibly larger) kernel onto the same floppy later without overlapping + the RAM disk image. An offset of 400 kB for kernels about 350 kB in + size would be reasonable. Make sure offset+size of ram_image.gz is + not larger than the total space on your floppy (usually 1440 kB). + + dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400 + +g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc. + For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would + have 2^15 + 2^14 + 400 = 49552. + + rdev /dev/fd0 /dev/fd0 + rdev -r /dev/fd0 49552 + +That is it. You now have your boot/root compressed RAM disk floppy. Some +users may wish to combine steps (d) and (f) by using a pipe. + +-------------------------------------------------------------------------- + Paul Gortmaker 12/95 + +Changelog: +---------- + +10-22-04 : Updated to reflect changes in command line options, remove + obsolete references, general cleanup. + James Nelson (james4765@gmail.com) + + +12-95 : Original Document diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt deleted file mode 100644 index 89698e8df7d4..000000000000 --- a/Documentation/cciss.txt +++ /dev/null @@ -1,171 +0,0 @@ -This driver is for Compaq's SMART Array Controllers. - -Supported Cards: ----------------- - -This driver is known to work with the following cards: - - * SA 5300 - * SA 5i - * SA 532 - * SA 5312 - * SA 641 - * SA 642 - * SA 6400 - * SA 6400 U320 Expansion Module - * SA 6i - * SA P600 - * SA P800 - * SA E400 - * SA P400i - * SA E200 - * SA E200i - * SA E500 - * SA P700m - * SA P212 - * SA P410 - * SA P410i - * SA P411 - * SA P812 - * SA P712m - * SA P711m - -Detecting drive failures: -------------------------- - -To get the status of logical volumes and to detect physical drive -failures, you can use the cciss_vol_status program found here: -http://cciss.sourceforge.net/#cciss_utils - -Device Naming: --------------- - -If nodes are not already created in the /dev/cciss directory, run as root: - -# cd /dev -# ./MAKEDEV cciss - -You need some entries in /dev for the cciss device. The MAKEDEV script -can make device nodes for you automatically. Currently the device setup -is as follows: - -Major numbers: - 104 cciss0 - 105 cciss1 - 106 cciss2 - 105 cciss3 - 108 cciss4 - 109 cciss5 - 110 cciss6 - 111 cciss7 - -Minor numbers: - b7 b6 b5 b4 b3 b2 b1 b0 - |----+----| |----+----| - | | - | +-------- Partition ID (0=wholedev, 1-15 partition) - | - +-------------------- Logical Volume number - -The device naming scheme is: -/dev/cciss/c0d0 Controller 0, disk 0, whole device -/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1 -/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2 -/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3 - -/dev/cciss/c1d1 Controller 1, disk 1, whole device -/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1 -/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2 -/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3 - -SCSI tape drive and medium changer support ------------------------------------------- - -SCSI sequential access devices and medium changer devices are supported and -appropriate device nodes are automatically created. (e.g. -/dev/st0, /dev/st1, etc. See the "st" man page for more details.) -You must enable "SCSI tape drive support for Smart Array 5xxx" and -"SCSI support" in your kernel configuration to be able to use SCSI -tape drives with your Smart Array 5xxx controller. - -Additionally, note that the driver will not engage the SCSI core at init -time. The driver must be directed to dynamically engage the SCSI core via -the /proc filesystem entry which the "block" side of the driver creates as -/proc/driver/cciss/cciss* at runtime. This is because at driver init time, -the SCSI core may not yet be initialized (because the driver is a block -driver) and attempting to register it with the SCSI core in such a case -would cause a hang. This is best done via an initialization script -(typically in /etc/init.d, but could vary depending on distribution). -For example: - - for x in /proc/driver/cciss/cciss[0-9]* - do - echo "engage scsi" > $x - done - -Once the SCSI core is engaged by the driver, it cannot be disengaged -(except by unloading the driver, if it happens to be linked as a module.) - -Note also that if no sequential access devices or medium changers are -detected, the SCSI core will not be engaged by the action of the above -script. - -Hot plug support for SCSI tape drives -------------------------------------- - -Hot plugging of SCSI tape drives is supported, with some caveats. -The cciss driver must be informed that changes to the SCSI bus -have been made. This may be done via the /proc filesystem. -For example: - - echo "rescan" > /proc/scsi/cciss0/1 - -This causes the driver to query the adapter about changes to the -physical SCSI buses and/or fibre channel arbitrated loop and the -driver to make note of any new or removed sequential access devices -or medium changers. The driver will output messages indicating what -devices have been added or removed and the controller, bus, target and -lun used to address the device. It then notifies the SCSI mid layer -of these changes. - -Note that the naming convention of the /proc filesystem entries -contains a number in addition to the driver name. (E.g. "cciss0" -instead of just "cciss" which you might expect.) - -Note: ONLY sequential access devices and medium changers are presented -as SCSI devices to the SCSI mid layer by the cciss driver. Specifically, -physical SCSI disk drives are NOT presented to the SCSI mid layer. The -physical SCSI disk drives are controlled directly by the array controller -hardware and it is important to prevent the kernel from attempting to directly -access these devices too, as if the array controller were merely a SCSI -controller in the same way that we are allowing it to access SCSI tape drives. - -SCSI error handling for tape drives and medium changers -------------------------------------------------------- - -The linux SCSI mid layer provides an error handling protocol which -kicks into gear whenever a SCSI command fails to complete within a -certain amount of time (which can vary depending on the command). -The cciss driver participates in this protocol to some extent. The -normal protocol is a four step process. First the device is told -to abort the command. If that doesn't work, the device is reset. -If that doesn't work, the SCSI bus is reset. If that doesn't work -the host bus adapter is reset. Because the cciss driver is a block -driver as well as a SCSI driver and only the tape drives and medium -changers are presented to the SCSI mid layer, and unlike more -straightforward SCSI drivers, disk i/o continues through the block -side during the SCSI error recovery process, the cciss driver only -implements the first two of these actions, aborting the command, and -resetting the device. Additionally, most tape drives will not oblige -in aborting commands, and sometimes it appears they will not even -obey a reset command, though in most circumstances they will. In -the case that the command cannot be aborted and the device cannot be -reset, the device will be set offline. - -In the event the error handling code is triggered and a tape drive is -successfully reset or the tardy command is successfully aborted, the -tape drive may still not allow i/o to continue until some command -is issued which positions the tape to a known position. Typically you -must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example) -before i/o can proceed again to a tape drive which was reset. - diff --git a/Documentation/computone.txt b/Documentation/computone.txt deleted file mode 100644 index 5e2a0c76bfa0..000000000000 --- a/Documentation/computone.txt +++ /dev/null @@ -1,522 +0,0 @@ -NOTE: This is an unmaintained driver. It is not guaranteed to work due to -changes made in the tty layer in 2.6. If you wish to take over maintenance of -this driver, contact Michael Warfield . - -Changelog: ----------- -11-01-2001: Original Document - -10-29-2004: Minor misspelling & format fix, update status of driver. - James Nelson - -Computone Intelliport II/Plus Multiport Serial Driver ------------------------------------------------------ - -Release Notes For Linux Kernel 2.2 and higher. -These notes are for the drivers which have already been integrated into the -kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4. - -Version: 1.2.14 -Date: 11/01/2001 -Historical Author: Andrew Manison -Primary Author: Doug McNash -Support: support@computone.com -Fixes and Updates: Mike Warfield - -This file assumes that you are using the Computone drivers which are -integrated into the kernel sources. For updating the drivers or installing -drivers into kernels which do not already have Computone drivers, please -refer to the instructions in the README.computone file in the driver patch. - - -1. INTRODUCTION - -This driver supports the entire family of Intelliport II/Plus controllers -with the exception of the MicroChannel controllers. It does not support -products previous to the Intelliport II. - -This driver was developed on the v2.0.x Linux tree and has been tested up -to v2.4.14; it will probably not work with earlier v1.X kernels,. - - -2. QUICK INSTALLATION - -Hardware - If you have an ISA card, find a free interrupt and io port. - List those in use with `cat /proc/interrupts` and - `cat /proc/ioports`. Set the card dip switches to a free - address. You may need to configure your BIOS to reserve an - irq for an ISA card. PCI and EISA parameters are set - automagically. Insert card into computer with the power off - before or after drivers installation. - - Note the hardware address from the Computone ISA cards installed into - the system. These are required for editing ip2.c or editing - /etc/modprobe.conf, or for specification on the modprobe - command line. - - Note that the /etc/modules.conf should be used for older (pre-2.6) - kernels. - -Software - - -Module installation: - -a) Determine free irq/address to use if any (configure BIOS if need be) -b) Run "make config" or "make menuconfig" or "make xconfig" - Select (m) module for CONFIG_COMPUTONE under character - devices. CONFIG_PCI and CONFIG_MODULES also may need to be set. -c) Set address on ISA cards then: - edit /usr/src/linux/drivers/char/ip2.c if needed - or - edit /etc/modprobe.conf if needed (module). - or both to match this setting. -d) Run "make modules" -e) Run "make modules_install" -f) Run "/sbin/depmod -a" -g) install driver using `modprobe ip2 ` (options listed below) -h) run ip2mkdev (either the script below or the binary version) - - -Kernel installation: - -a) Determine free irq/address to use if any (configure BIOS if need be) -b) Run "make config" or "make menuconfig" or "make xconfig" - Select (y) kernel for CONFIG_COMPUTONE under character - devices. CONFIG_PCI may need to be set if you have PCI bus. -c) Set address on ISA cards then: - edit /usr/src/linux/drivers/char/ip2.c - (Optional - may be specified on kernel command line now) -d) Run "make zImage" or whatever target you prefer. -e) mv /usr/src/linux/arch/i386/boot/zImage to /boot. -f) Add new config for this kernel into /etc/lilo.conf, run "lilo" - or copy to a floppy disk and boot from that floppy disk. -g) Reboot using this kernel -h) run ip2mkdev (either the script below or the binary version) - -Kernel command line options: - -When compiling the driver into the kernel, io and irq may be -compiled into the driver by editing ip2.c and setting the values for -io and irq in the appropriate array. An alternative is to specify -a command line parameter to the kernel at boot up. - - ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 - -Note that this order is very different from the specifications for the -modload parameters which have separate IRQ and IO specifiers. - -The io port also selects PCI (1) and EISA (2) boards. - - io=0 No board - io=1 PCI board - io=2 EISA board - else ISA board io address - -You only need to specify the boards which are present. - - Examples: - - 2 PCI boards: - - ip2=1,0,1,0 - - 1 ISA board at 0x310 irq 5: - - ip2=0x310,5 - -This can be added to and "append" option in lilo.conf similar to this: - - append="ip2=1,0,1,0" - - -3. INSTALLATION - -Previously, the driver sources were packaged with a set of patch files -to update the character drivers' makefile and configuration file, and other -kernel source files. A build script (ip2build) was included which applies -the patches if needed, and build any utilities needed. -What you receive may be a single patch file in conventional kernel -patch format build script. That form can also be applied by -running patch -p1 < ThePatchFile. Otherwise run ip2build. - -The driver can be installed as a module (recommended) or built into the -kernel. This is selected as for other drivers through the `make config` -command from the root of the Linux source tree. If the driver is built -into the kernel you will need to edit the file ip2.c to match the boards -you are installing. See that file for instructions. If the driver is -installed as a module the configuration can also be specified on the -modprobe command line as follows: - - modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4 - -where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11, -12,15) and addr1-4 are the base addresses for up to four controllers. If -the irqs are not specified the driver uses the default in ip2.c (which -selects polled mode). If no base addresses are specified the defaults in -ip2.c are used. If you are autoloading the driver module with kerneld or -kmod the base addresses and interrupt number must also be set in ip2.c -and recompile or just insert and options line in /etc/modprobe.conf or both. -The options line is equivalent to the command line and takes precedence over -what is in ip2.c. - -/etc/modprobe.conf sample: - options ip2 io=1,0x328 irq=1,10 - alias char-major-71 ip2 - alias char-major-72 ip2 - alias char-major-73 ip2 - -The equivalent in ip2.c: - -static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 }; -static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; - -The equivalent for the kernel command line (in lilo.conf): - - append="ip2=1,1,0x328,10" - - -Note: Both io and irq should be updated to reflect YOUR system. An "io" - address of 1 or 2 indicates a PCI or EISA card in the board table. - The PCI or EISA irq will be assigned automatically. - -Specifying an invalid or in-use irq will default the driver into -running in polled mode for that card. If all irq entries are 0 then -all cards will operate in polled mode. - -If you select the driver as part of the kernel run : - - make zlilo (or whatever you do to create a bootable kernel) - -If you selected a module run : - - make modules && make modules_install - -The utility ip2mkdev (see 5 and 7 below) creates all the device nodes -required by the driver. For a device to be created it must be configured -in the driver and the board must be installed. Only devices corresponding -to real IntelliPort II ports are created. With multiple boards and expansion -boxes this will leave gaps in the sequence of device names. ip2mkdev uses -Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and -cuf0 - cuf255 for callout devices. - - -4. USING THE DRIVERS - -As noted above, the driver implements the ports in accordance with Linux -conventions, and the devices should be interchangeable with the standard -serial devices. (This is a key point for problem reporting: please make -sure that what you are trying do works on the ttySx/cuax ports first; then -tell us what went wrong with the ip2 ports!) - -Higher speeds can be obtained using the setserial utility which remaps -38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. -Intelliport II installations using the PowerPort expansion module can -use the custom speed setting to select the highest speeds: 153,600 bps, -230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for -custom baud rate configuration is fixed at 921,600 for cards/expansion -modules with ST654's and 115200 for those with Cirrus CD1400's. This -corresponds to the maximum bit rates those chips are capable. -For example if the baud base is 921600 and the baud divisor is 18 then -the custom rate is 921600/18 = 51200 bps. See the setserial man page for -complete details. Of course if stty accepts the higher rates now you can -use that as well as the standard ioctls(). - - -5. ip2mkdev and assorted utilities... - -Several utilities, including the source for a binary ip2mkdev utility are -available under .../drivers/char/ip2. These can be build by changing to -that directory and typing "make" after the kernel has be built. If you do -not wish to compile the binary utilities, the shell script below can be -cut out and run as "ip2mkdev" to create the necessary device files. To -use the ip2mkdev script, you must have procfs enabled and the proc file -system mounted on /proc. - - -6. NOTES - -This is a release version of the driver, but it is impossible to test it -in all configurations of Linux. If there is any anomalous behaviour that -does not match the standard serial port's behaviour please let us know. - - -7. ip2mkdev shell script - -Previously, this script was simply attached here. It is now attached as a -shar archive to make it easier to extract the script from the documentation. -To create the ip2mkdev shell script change to a convenient directory (/tmp -works just fine) and run the following command: - - unshar Documentation/computone.txt - (This file) - -You should now have a file ip2mkdev in your current working directory with -permissions set to execute. Running that script with then create the -necessary devices for the Computone boards, interfaces, and ports which -are present on you system at the time it is run. - - -#!/bin/sh -# This is a shell archive (produced by GNU sharutils 4.2.1). -# To extract the files from this archive, save it to some FILE, remove -# everything before the `!/bin/sh' line above, then type `sh FILE'. -# -# Made on 2001-10-29 10:32 EST by . -# Source directory was `/home2/src/tmp'. -# -# Existing files will *not* be overwritten unless `-c' is specified. -# -# This shar contains: -# length mode name -# ------ ---------- ------------------------------------------ -# 4251 -rwxr-xr-x ip2mkdev -# -save_IFS="${IFS}" -IFS="${IFS}:" -gettext_dir=FAILED -locale_dir=FAILED -first_param="$1" -for dir in $PATH -do - if test "$gettext_dir" = FAILED && test -f $dir/gettext \ - && ($dir/gettext --version >/dev/null 2>&1) - then - set `$dir/gettext --version 2>&1` - if test "$3" = GNU - then - gettext_dir=$dir - fi - fi - if test "$locale_dir" = FAILED && test -f $dir/shar \ - && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) - then - locale_dir=`$dir/shar --print-text-domain-dir` - fi -done -IFS="$save_IFS" -if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED -then - echo=echo -else - TEXTDOMAINDIR=$locale_dir - export TEXTDOMAINDIR - TEXTDOMAIN=sharutils - export TEXTDOMAIN - echo="$gettext_dir/gettext -s" -fi -if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then - shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"' -elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then - shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"' -elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then - shar_touch='touch -am $3$4$5$6$2 "$8"' -else - shar_touch=: - echo - $echo 'WARNING: not restoring timestamps. Consider getting and' - $echo "installing GNU \`touch', distributed in GNU File Utilities..." - echo -fi -rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch -# -if mkdir _sh17581; then - $echo 'x -' 'creating lock directory' -else - $echo 'failed to create lock directory' - exit 1 -fi -# ============= ip2mkdev ============== -if test -f 'ip2mkdev' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)' -else - $echo 'x -' extracting 'ip2mkdev' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' && -#!/bin/sh - -# -# ip2mkdev -# -# Make or remove devices as needed for Computone Intelliport drivers -# -# First rule! If the dev file exists and you need it, don't mess -# with it. That prevents us from screwing up open ttys, ownership -# and permissions on a running system! -# -# This script will NOT remove devices that no longer exist if their -# board or interface box has been removed. If you want to get rid -# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*" -# before running this script. Running this script will then recreate -# all the valid devices. -# -# Michael H. Warfield -# /\/\|=mhw=|\/\/ -# mhw@wittsend.com -# -# Updated 10/29/2000 for version 1.2.13 naming convention -# under devfs. /\/\|=mhw=|\/\/ -# -# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/ -# -X -if test -d /dev/ip2 ; then -# This is devfs mode... We don't do anything except create symlinks -# from the real devices to the old names! -X cd /dev -X echo "Creating symbolic links to devfs devices" -X for i in `ls ip2` ; do -X if test ! -L ip2$i ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f ip2$i -X ln -s ip2/$i ip2$i -X fi -X done -X for i in `( cd tts ; ls F* )` ; do -X if test ! -L tty$i ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f tty$i -X ln -s tts/$i tty$i -X fi -X done -X for i in `( cd cua ; ls F* )` ; do -X DEVNUMBER=`expr $i : 'F\(.*\)'` -X if test ! -L cuf$DEVNUMBER ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f cuf$DEVNUMBER -X ln -s cua/$i cuf$DEVNUMBER -X fi -X done -X exit 0 -fi -X -if test ! -f /proc/tty/drivers -then -X echo "\ -Unable to check driver status. -Make sure proc file system is mounted." -X -X exit 255 -fi -X -if test ! -f /proc/tty/driver/ip2 -then -X echo "\ -Unable to locate ip2 proc file. -Attempting to load driver" -X -X if /sbin/insmod ip2 -X then -X if test ! -f /proc/tty/driver/ip2 -X then -X echo "\ -Unable to locate ip2 proc file after loading driver. -Driver initialization failure or driver version error. -" -X exit 255 -X fi -X else -X echo "Unable to load ip2 driver." -X exit 255 -X fi -fi -X -# Ok... So we got the driver loaded and we can locate the procfs files. -# Next we need our major numbers. -X -TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` -CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` -BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2` -X -echo "\ -TTYMAJOR = $TTYMAJOR -CUAMAJOR = $CUAMAJOR -BRDMAJOR = $BRDMAJOR -" -X -# Ok... Now we should know our major numbers, if appropriate... -# Now we need our boards and start the device loops. -X -grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest -do -X # The test for blank "type" will catch the stats lead-in lines -X # if they exist in the file -X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = "" -X then -X continue -X fi -X -X BOARDNO=`expr "$number" : '\([0-9]\):'` -X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '` -X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '` -X -X if test "$BOARDNO" = "" -o "$PORTS" = "" -X then -# This may be a bug. We should at least get this much information -X echo "Unable to process board line" -X continue -X fi -X -X if test "$MINORS" = "" -X then -# Silently skip this one. This board seems to have no boxes -X continue -X fi -X -X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS" -X -X if test "$BRDMAJOR" != "" -X then -X BRDMINOR=`expr $BOARDNO \* 4` -X STSMINOR=`expr $BRDMINOR + 1` -X if test ! -c /dev/ip2ipl$BOARDNO ; then -X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR -X fi -X if test ! -c /dev/ip2stat$BOARDNO ; then -X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR -X fi -X fi -X -X if test "$TTYMAJOR" != "" -X then -X PORTNO=$BOARDBASE -X -X for PORTNO in $MINORS -X do -X if test ! -c /dev/ttyF$PORTNO ; then -X # We got the hardware but no device - make it -X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO -X fi -X done -X fi -X -X if test "$CUAMAJOR" != "" -X then -X PORTNO=$BOARDBASE -X -X for PORTNO in $MINORS -X do -X if test ! -c /dev/cuf$PORTNO ; then -X # We got the hardware but no device - make it -X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO -X fi -X done -X fi -done -X -Xexit 0 -SHAR_EOF - (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") && - chmod 0755 'ip2mkdev' || - $echo 'restore of' 'ip2mkdev' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'ip2mkdev:' 'MD5 check failed' -cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`" - test 4251 -eq "$shar_count" || - $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!" - fi -fi -rm -fr _sh17581 -exit 0 diff --git a/Documentation/cpqarray.txt b/Documentation/cpqarray.txt deleted file mode 100644 index c7154e20ef5e..000000000000 --- a/Documentation/cpqarray.txt +++ /dev/null @@ -1,93 +0,0 @@ -This driver is for Compaq's SMART2 Intelligent Disk Array Controllers. - -Supported Cards: ----------------- - -This driver is known to work with the following cards: - - * SMART (EISA) - * SMART-2/E (EISA) - * SMART-2/P - * SMART-2DH - * SMART-2SL - * SMART-221 - * SMART-3100ES - * SMART-3200 - * Integrated Smart Array Controller - * SA 4200 - * SA 4250ES - * SA 431 - * RAID LC2 Controller - -It should also work with some really old Disk array adapters, but I am -unable to test against these cards: - - * IDA - * IDA-2 - * IAES - - -EISA Controllers: ------------------ - -If you want to use an EISA controller you'll have to supply some -modprobe/lilo parameters. If the driver is compiled into the kernel, must -give it the controller's IO port address at boot time (it is not -necessary to specify the IRQ). For example, if you had two SMART-2/E -controllers, in EISA slots 1 and 2 you'd give it a boot argument like -this: - - smart2=0x1000,0x2000 - -If you were loading the driver as a module, you'd give load it like this: - - modprobe cpqarray eisa=0x1000,0x2000 - -You can use EISA and PCI adapters at the same time. - - -Device Naming: --------------- - -You need some entries in /dev for the ida device. MAKEDEV in the /dev -directory can make device nodes for you automatically. The device setup is -as follows: - -Major numbers: - 72 ida0 - 73 ida1 - 74 ida2 - 75 ida3 - 76 ida4 - 77 ida5 - 78 ida6 - 79 ida7 - -Minor numbers: - b7 b6 b5 b4 b3 b2 b1 b0 - |----+----| |----+----| - | | - | +-------- Partition ID (0=wholedev, 1-15 partition) - | - +-------------------- Logical Volume number - -The device naming scheme is: -/dev/ida/c0d0 Controller 0, disk 0, whole device -/dev/ida/c0d0p1 Controller 0, disk 0, partition 1 -/dev/ida/c0d0p2 Controller 0, disk 0, partition 2 -/dev/ida/c0d0p3 Controller 0, disk 0, partition 3 - -/dev/ida/c1d1 Controller 1, disk 1, whole device -/dev/ida/c1d1p1 Controller 1, disk 1, partition 1 -/dev/ida/c1d1p2 Controller 1, disk 1, partition 2 -/dev/ida/c1d1p3 Controller 1, disk 1, partition 3 - - -Changelog: -========== - -10-28-2004 : General cleanup, syntax fixes for in-kernel driver version. - James Nelson - - -1999 : Original Document diff --git a/Documentation/digiepca.txt b/Documentation/digiepca.txt deleted file mode 100644 index f2560e22f2c9..000000000000 --- a/Documentation/digiepca.txt +++ /dev/null @@ -1,98 +0,0 @@ -NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at -http://www.digi.com for PCI cards. They no longer maintain this driver, -and have no 2.6 driver for ISA cards. - -This driver requires a number of user-space tools. They can be acquired from -http://www.digi.com, but only works with 2.4 kernels. - - -The Digi Intl. epca driver. ----------------------------- -The Digi Intl. epca driver for Linux supports the following boards: - -Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve -Digi EISA/Xem, PCI/Xem, PCI/Xr - -Limitations: ------------- -Currently the driver only autoprobes for supported PCI boards. - -The Linux MAKEDEV command does not support generating the Digiboard -Devices. Users executing digiConfig to setup EISA and PC series cards -will have their device nodes automatically constructed (cud?? for ~CLOCAL, -and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO -prompt, or those users booting PCI cards may use buildDIGI to construct -the necessary nodes. - -Notes: ------- -This driver may be configured via LILO. For users who have already configured -their driver using digiConfig, configuring from LILO will override previous -settings. Multiple boards may be configured by issuing multiple LILO command -lines. For examples see the bottom of this document. - -Device names start at 0 and continue up. Beware of this as previous Digi -drivers started device names with 1. - -PCI boards are auto-detected and configured by the driver. PCI boards will -be allocated device numbers (internally) beginning with the lowest PCI slot -first. In other words a PCI card in slot 3 will always have higher device -nodes than a PCI card in slot 1. - -LILO config examples: ---------------------- -Using LILO's APPEND command, a string of comma separated identifiers or -integers can be used to configure supported boards. The six values in order -are: - - Enable/Disable this card or Override, - Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), - EISA/Xem (3), PC/64Xe (4), PC/Xi (5), - Enable/Disable alternate pin arrangement, - Number of ports on this card, - I/O Port where card is configured (in HEX if using string identifiers), - Base of memory window (in HEX if using string identifiers), - -NOTE : PCI boards are auto-detected and configured. Do not attempt to -configure PCI boards with the LILO append command. If you wish to override -previous configuration data (As set by digiConfig), but you do not wish to -configure any specific card (Example if there are PCI cards in the system) -the following override command will accomplish this: --> append="digi=2" - -Samples: - append="digiepca=E,PC/Xe,D,16,200,D0000" - or - append="digi=1,0,0,16,512,851968" - -Supporting Tools: ------------------ -Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See -drivers/char/README.epca for more details. Note, -this driver REQUIRES that digiDload be executed prior to it being used. -Failure to do this will result in an ENODEV error. - -Documentation: --------------- -Complete documentation for this product may be found in the tool package. - -Sources of information and support: ------------------------------------ -Digi Intl. support site for this product: - --> http://www.digi.com - -Acknowledgments: ----------------- -Much of this work (And even text) was derived from a similar document -supporting the original public domain DigiBoard driver Copyright (C) -1994,1995 Troy De Jongh. Many thanks to Christoph Lameter -(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored -and contributed to the original document. - -Changelog: ----------- -10-29-04: Update status of driver, remove dead links in document - James Nelson - -2000 (?) Original Document diff --git a/Documentation/floppy.txt b/Documentation/floppy.txt deleted file mode 100644 index 6ccab88705cb..000000000000 --- a/Documentation/floppy.txt +++ /dev/null @@ -1,245 +0,0 @@ -This file describes the floppy driver. - -FAQ list: -========= - - A FAQ list may be found in the fdutils package (see below), and also -at . - - -LILO configuration options (Thinkpad users, read this) -====================================================== - - The floppy driver is configured using the 'floppy=' option in -lilo. This option can be typed at the boot prompt, or entered in the -lilo configuration file. - - Example: If your kernel is called linux-2.6.9, type the following line -at the lilo boot prompt (if you have a thinkpad): - - linux-2.6.9 floppy=thinkpad - -You may also enter the following line in /etc/lilo.conf, in the description -of linux-2.6.9: - - append = "floppy=thinkpad" - - Several floppy related options may be given, example: - - linux-2.6.9 floppy=daring floppy=two_fdc - append = "floppy=daring floppy=two_fdc" - - If you give options both in the lilo config file and on the boot -prompt, the option strings of both places are concatenated, the boot -prompt options coming last. That's why there are also options to -restore the default behavior. - - -Module configuration options -============================ - - If you use the floppy driver as a module, use the following syntax: -modprobe floppy - -Example: - modprobe floppy omnibook messages - - If you need certain options enabled every time you load the floppy driver, -you can put: - - options floppy omnibook messages - -in /etc/modprobe.conf. - - - The floppy driver related options are: - - floppy=asus_pci - Sets the bit mask to allow only units 0 and 1. (default) - - floppy=daring - Tells the floppy driver that you have a well behaved floppy controller. - This allows more efficient and smoother operation, but may fail on - certain controllers. This may speed up certain operations. - - floppy=0,daring - Tells the floppy driver that your floppy controller should be used - with caution. - - floppy=one_fdc - Tells the floppy driver that you have only one floppy controller. - (default) - - floppy=two_fdc - floppy=
,two_fdc - Tells the floppy driver that you have two floppy controllers. - The second floppy controller is assumed to be at
. - This option is not needed if the second controller is at address - 0x370, and if you use the 'cmos' option. - - floppy=thinkpad - Tells the floppy driver that you have a Thinkpad. Thinkpads use an - inverted convention for the disk change line. - - floppy=0,thinkpad - Tells the floppy driver that you don't have a Thinkpad. - - floppy=omnibook - floppy=nodma - Tells the floppy driver not to use Dma for data transfers. - This is needed on HP Omnibooks, which don't have a workable - DMA channel for the floppy driver. This option is also useful - if you frequently get "Unable to allocate DMA memory" messages. - Indeed, dma memory needs to be continuous in physical memory, - and is thus harder to find, whereas non-dma buffers may be - allocated in virtual memory. However, I advise against this if - you have an FDC without a FIFO (8272A or 82072). 82072A and - later are OK. You also need at least a 486 to use nodma. - If you use nodma mode, I suggest you also set the FIFO - threshold to 10 or lower, in order to limit the number of data - transfer interrupts. - - If you have a FIFO-able FDC, the floppy driver automatically - falls back on non DMA mode if no DMA-able memory can be found. - If you want to avoid this, explicitly ask for 'yesdma'. - - floppy=yesdma - Tells the floppy driver that a workable DMA channel is available. - (default) - - floppy=nofifo - Disables the FIFO entirely. This is needed if you get "Bus - master arbitration error" messages from your Ethernet card (or - from other devices) while accessing the floppy. - - floppy=usefifo - Enables the FIFO. (default) - - floppy=,fifo_depth - Sets the FIFO threshold. This is mostly relevant in DMA - mode. If this is higher, the floppy driver tolerates more - interrupt latency, but it triggers more interrupts (i.e. it - imposes more load on the rest of the system). If this is - lower, the interrupt latency should be lower too (faster - processor). The benefit of a lower threshold is less - interrupts. - - To tune the fifo threshold, switch on over/underrun messages - using 'floppycontrol --messages'. Then access a floppy - disk. If you get a huge amount of "Over/Underrun - retrying" - messages, then the fifo threshold is too low. Try with a - higher value, until you only get an occasional Over/Underrun. - It is a good idea to compile the floppy driver as a module - when doing this tuning. Indeed, it allows to try different - fifo values without rebooting the machine for each test. Note - that you need to do 'floppycontrol --messages' every time you - re-insert the module. - - Usually, tuning the fifo threshold should not be needed, as - the default (0xa) is reasonable. - - floppy=,,cmos - Sets the CMOS type of to . This is mandatory if - you have more than two floppy drives (only two can be - described in the physical CMOS), or if your BIOS uses - non-standard CMOS types. The CMOS types are: - - 0 - Use the value of the physical CMOS - 1 - 5 1/4 DD - 2 - 5 1/4 HD - 3 - 3 1/2 DD - 4 - 3 1/2 HD - 5 - 3 1/2 ED - 6 - 3 1/2 ED - 16 - unknown or not installed - - (Note: there are two valid types for ED drives. This is because 5 was - initially chosen to represent floppy *tapes*, and 6 for ED drives. - AMI ignored this, and used 5 for ED drives. That's why the floppy - driver handles both.) - - floppy=unexpected_interrupts - Print a warning message when an unexpected interrupt is received. - (default) - - floppy=no_unexpected_interrupts - floppy=L40SX - Don't print a message when an unexpected interrupt is received. This - is needed on IBM L40SX laptops in certain video modes. (There seems - to be an interaction between video and floppy. The unexpected - interrupts affect only performance, and can be safely ignored.) - - floppy=broken_dcl - Don't use the disk change line, but assume that the disk was - changed whenever the device node is reopened. Needed on some - boxes where the disk change line is broken or unsupported. - This should be regarded as a stopgap measure, indeed it makes - floppy operation less efficient due to unneeded cache - flushings, and slightly more unreliable. Please verify your - cable, connection and jumper settings if you have any DCL - problems. However, some older drives, and also some laptops - are known not to have a DCL. - - floppy=debug - Print debugging messages. - - floppy=messages - Print informational messages for some operations (disk change - notifications, warnings about over and underruns, and about - autodetection). - - floppy=silent_dcl_clear - Uses a less noisy way to clear the disk change line (which - doesn't involve seeks). Implied by 'daring' option. - - floppy=,irq - Sets the floppy IRQ to instead of 6. - - floppy=,dma - Sets the floppy DMA channel to instead of 2. - - floppy=slow - Use PS/2 stepping rate: - " PS/2 floppies have much slower step rates than regular floppies. - It's been recommended that take about 1/4 of the default speed - in some more extreme cases." - - -Supporting utilities and additional documentation: -================================================== - - Additional parameters of the floppy driver can be configured at -runtime. Utilities which do this can be found in the fdutils package. -This package also contains a new version of mtools which allows to -access high capacity disks (up to 1992K on a high density 3 1/2 disk!). -It also contains additional documentation about the floppy driver. - -The latest version can be found at fdutils homepage: - http://fdutils.linux.lu - -The fdutils releases can be found at: - http://fdutils.linux.lu/download.html - http://www.tux.org/pub/knaff/fdutils/ - ftp://metalab.unc.edu/pub/Linux/utils/disk-management/ - -Reporting problems about the floppy driver -========================================== - - If you have a question or a bug report about the floppy driver, mail -me at Alain.Knaff@poboxes.com . If you post to Usenet, preferably use -comp.os.linux.hardware. As the volume in these groups is rather high, -be sure to include the word "floppy" (or "FLOPPY") in the subject -line. If the reported problem happens when mounting floppy disks, be -sure to mention also the type of the filesystem in the subject line. - - Be sure to read the FAQ before mailing/posting any bug reports! - - Alain - -Changelog -========= - -10-30-2004 : Cleanup, updating, add reference to module configuration. - James Nelson - -6-3-2000 : Original Document diff --git a/Documentation/hayes-esp.txt b/Documentation/hayes-esp.txt deleted file mode 100644 index 09b5d5856758..000000000000 --- a/Documentation/hayes-esp.txt +++ /dev/null @@ -1,154 +0,0 @@ -HAYES ESP DRIVER VERSION 2.1 - -A big thanks to the people at Hayes, especially Alan Adamson. Their support -has enabled me to provide enhancements to the driver. - -Please report your experiences with this driver to me (arobinso@nyx.net). I -am looking for both positive and negative feedback. - -*** IMPORTANT CHANGES FOR 2.1 *** -Support for PIO mode. Five situations will cause PIO mode to be used: -1) A multiport card is detected. PIO mode will always be used. (8 port cards -do not support DMA). -2) The DMA channel is set to an invalid value (anything other than 1 or 3). -3) The DMA buffer/channel could not be allocated. The port will revert to PIO -mode until it is reopened. -4) Less than a specified number of bytes need to be transferred to/from the -FIFOs. PIO mode will be used for that transfer only. -5) A port needs to do a DMA transfer and another port is already using the -DMA channel. PIO mode will be used for that transfer only. - -Since the Hayes ESP seems to conflict with other cards (notably sound cards) -when using DMA, DMA is turned off by default. To use DMA, it must be turned -on explicitly, either with the "dma=" option described below or with -setserial. A multiport card can be forced into DMA mode by using setserial; -however, most multiport cards don't support DMA. - -The latest version of setserial allows the enhanced configuration of the ESP -card to be viewed and modified. -*** - -This package contains the files needed to compile a module to support the Hayes -ESP card. The drivers are basically a modified version of the serial drivers. - -Features: - -- Uses the enhanced mode of the ESP card, allowing a wider range of - interrupts and features than compatibility mode -- Uses DMA and 16 bit PIO mode to transfer data to and from the ESP's FIFOs, - reducing CPU load -- Supports primary and secondary ports - - -If the driver is compiled as a module, the IRQs to use can be specified by -using the irq= option. The format is: - -irq=[0x100],[0x140],[0x180],[0x200],[0x240],[0x280],[0x300],[0x380] - -The address in brackets is the base address of the card. The IRQ of -nonexistent cards can be set to 0. If an IRQ of a card that does exist is set -to 0, the driver will attempt to guess at the correct IRQ. For example, to set -the IRQ of the card at address 0x300 to 12, the insmod command would be: - -insmod esp irq=0,0,0,0,0,0,12,0 - -The custom divisor can be set by using the divisor= option. The format is the -same as for the irq= option. Each divisor value is a series of hex digits, -with each digit representing the divisor to use for a corresponding port. The -divisor value is constructed RIGHT TO LEFT. Specifying a nonzero divisor value -will automatically set the spd_cust flag. To calculate the divisor to use for -a certain baud rate, divide the port's base baud (generally 921600) by the -desired rate. For example, to set the divisor of the primary port at 0x300 to -4 and the divisor of the secondary port at 0x308 to 8, the insmod command would -be: - -insmod esp divisor=0,0,0,0,0,0,0x84,0 - -The dma= option can be used to set the DMA channel. The channel can be either -1 or 3. Specifying any other value will force the driver to use PIO mode. -For example, to set the DMA channel to 3, the insmod command would be: - -insmod esp dma=3 - -The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger -levels. They specify when the ESP card should send an interrupt. Larger -values will decrease the number of interrupts; however, a value too high may -result in data loss. Valid values are 1 through 1023, with 768 being the -default. For example, to set the receive trigger level to 512 bytes and the -transmit trigger level to 700 bytes, the insmod command would be: - -insmod esp rx_trigger=512 tx_trigger=700 - -The flow_off= and flow_on= options can be used to set the hardware flow off/ -flow on levels. The flow on level must be lower than the flow off level, and -the flow off level should be higher than rx_trigger. Valid values are 1 -through 1023, with 1016 being the default flow off level and 944 being the -default flow on level. For example, to set the flow off level to 1000 bytes -and the flow on level to 935 bytes, the insmod command would be: - -insmod esp flow_off=1000 flow_on=935 - -The rx_timeout= option can be used to set the receive timeout value. This -value indicates how long after receiving the last character that the ESP card -should wait before signalling an interrupt. Valid values are 0 though 255, -with 128 being the default. A value too high will increase latency, and a -value too low will cause unnecessary interrupts. For example, to set the -receive timeout to 255, the insmod command would be: - -insmod esp rx_timeout=255 - -The pio_threshold= option sets the threshold (in number of characters) for -using PIO mode instead of DMA mode. For example, if this value is 32, -transfers of 32 bytes or less will always use PIO mode. - -insmod esp pio_threshold=32 - -Multiple options can be listed on the insmod command line by separating each -option with a space. For example: - -insmod esp dma=3 trigger=512 - -The esp module can be automatically loaded when needed. To cause this to -happen, add the following lines to /etc/modprobe.conf (replacing the last line -with options for your configuration): - -alias char-major-57 esp -alias char-major-58 esp -options esp irq=0,0,0,0,0,0,3,0 divisor=0,0,0,0,0,0,0x4,0 - -You may also need to run 'depmod -a'. - -Devices must be created manually. To create the devices, note the output from -the module after it is inserted. The output will appear in the location where -kernel messages usually appear (usually /var/adm/messages). Create two devices -for each 'tty' mentioned, one with major of 57 and the other with major of 58. -The minor number should be the same as the tty number reported. The commands -would be (replace ? with the tty number): - -mknod /dev/ttyP? c 57 ? -mknod /dev/cup? c 58 ? - -For example, if the following line appears: - -Oct 24 18:17:23 techno kernel: ttyP8 at 0x0140 (irq = 3) is an ESP primary port - -...two devices should be created: - -mknod /dev/ttyP8 c 57 8 -mknod /dev/cup8 c 58 8 - -You may need to set the permissions on the devices: - -chmod 666 /dev/ttyP* -chmod 666 /dev/cup* - -The ESP module and the serial module should not conflict (they can be used at -the same time). After the ESP module has been loaded the ports on the ESP card -will no longer be accessible by the serial driver. - -If I/O errors are experienced when accessing the port, check for IRQ and DMA -conflicts ('cat /proc/interrupts' and 'cat /proc/dma' for a list of IRQs and -DMAs currently in use). - -Enjoy! -Andrew J. Robinson diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt deleted file mode 100644 index b880ce5dbd33..000000000000 --- a/Documentation/ioctl-number.txt +++ /dev/null @@ -1,201 +0,0 @@ -Ioctl Numbers -19 October 1999 -Michael Elizabeth Chastain - - -If you are adding new ioctl's to the kernel, you should use the _IO -macros defined in : - - _IO an ioctl with no parameters - _IOW an ioctl with write parameters (copy_from_user) - _IOR an ioctl with read parameters (copy_to_user) - _IOWR an ioctl with both write and read parameters. - -'Write' and 'read' are from the user's point of view, just like the -system calls 'write' and 'read'. For example, a SET_FOO ioctl would -be _IOW, although the kernel would actually read data from user space; -a GET_FOO ioctl would be _IOR, although the kernel would actually write -data to user space. - -The first argument to _IO, _IOW, _IOR, or _IOWR is an identifying letter -or number from the table below. Because of the large number of drivers, -many drivers share a partial letter with other drivers. - -If you are writing a driver for a new device and need a letter, pick an -unused block with enough room for expansion: 32 to 256 ioctl commands. -You can register the block by patching this file and submitting the -patch to Linus Torvalds. Or you can e-mail me at and -I'll register one for you. - -The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number -to distinguish ioctls from each other. The third argument to _IOW, -_IOR, or _IOWR is the type of the data going into the kernel or coming -out of the kernel (e.g. 'int' or 'struct foo'). NOTE! Do NOT use -sizeof(arg) as the third argument as this results in your ioctl thinking -it passes an argument of type size_t. - -Some devices use their major number as the identifier; this is OK, as -long as it is unique. Some devices are irregular and don't follow any -convention at all. - -Following this convention is good because: - -(1) Keeping the ioctl's globally unique helps error checking: - if a program calls an ioctl on the wrong device, it will get an - error rather than some unexpected behaviour. - -(2) The 'strace' build procedure automatically finds ioctl numbers - defined with _IO, _IOW, _IOR, or _IOWR. - -(3) 'strace' can decode numbers back into useful names when the - numbers are unique. - -(4) People looking for ioctls can grep for them more easily when - this convention is used to define the ioctl numbers. - -(5) When following the convention, the driver code can use generic - code to copy the parameters between user and kernel space. - -This table lists ioctls visible from user land for Linux/i386. It contains -most drivers up to 2.3.14, but I know I am missing some. - -Code Seq# Include File Comments -======================================================== -0x00 00-1F linux/fs.h conflict! -0x00 00-1F scsi/scsi_ioctl.h conflict! -0x00 00-1F linux/fb.h conflict! -0x00 00-1F linux/wavefront.h conflict! -0x02 all linux/fd.h -0x03 all linux/hdreg.h -0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these. -0x06 all linux/lp.h -0x09 all linux/md.h -0x12 all linux/fs.h - linux/blkpg.h -0x1b all InfiniBand Subsystem -0x20 all drivers/cdrom/cm206.h -0x22 all scsi/sg.h -'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem -'1' 00-1F PPS kit from Ulrich Windl - -'8' all SNP8023 advanced NIC card - -'A' 00-1F linux/apm_bios.h -'B' C0-FF advanced bbus - -'C' all linux/soundcard.h -'D' all asm-s390/dasd.h -'E' all linux/input.h -'F' all linux/fb.h -'H' all linux/hiddev.h -'I' all linux/isdn.h -'J' 00-1F drivers/scsi/gdth_ioctl.h -'K' all linux/kd.h -'L' 00-1F linux/loop.h -'L' 20-2F driver/usb/misc/vstusb.h -'L' E0-FF linux/ppdd.h encrypted disk device driver - -'M' all linux/soundcard.h -'N' 00-1F drivers/usb/scanner.h -'P' all linux/soundcard.h -'Q' all linux/soundcard.h -'R' 00-1F linux/random.h -'S' all linux/cdrom.h conflict! -'S' 80-81 scsi/scsi_ioctl.h conflict! -'S' 82-FF scsi/scsi.h conflict! -'T' all linux/soundcard.h conflict! -'T' all asm-i386/ioctls.h conflict! -'U' 00-EF linux/drivers/usb/usb.h -'V' all linux/vt.h -'W' 00-1F linux/watchdog.h conflict! -'W' 00-1F linux/wanrouter.h conflict! -'X' all linux/xfs_fs.h -'Y' all linux/cyclades.h -'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices - -'a' all ATM on linux - -'b' 00-FF bit3 vme host bridge - -'c' 00-7F linux/comstats.h conflict! -'c' 00-7F linux/coda.h conflict! -'c' 80-9F asm-s390/chsc.h -'d' 00-FF linux/char/drm/drm/h conflict! -'d' 00-DF linux/video_decoder.h conflict! -'d' F0-FF linux/digi1.h -'e' all linux/digi1.h conflict! -'e' 00-1F linux/video_encoder.h conflict! -'e' 00-1F net/irda/irtty.h conflict! -'f' 00-1F linux/ext2_fs.h -'h' 00-7F Charon filesystem - -'i' 00-3F linux/i2o.h -'j' 00-3F linux/joystick.h -'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system - -'l' 40-7F linux/udf_fs_i.h in development: - -'m' all linux/mtio.h conflict! -'m' all linux/soundcard.h conflict! -'m' all linux/synclink.h conflict! -'m' 00-1F net/irda/irmod.h conflict! -'n' 00-7F linux/ncp_fs.h -'n' E0-FF video/matrox.h matroxfb -'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2 -'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this) -'p' 00-3F linux/mc146818rtc.h conflict! -'p' 40-7F linux/nvram.h -'p' 80-9F user-space parport - -'q' 00-1F linux/serio.h -'q' 80-FF Internet PhoneJACK, Internet LineJACK - -'r' 00-1F linux/msdos_fs.h -'s' all linux/cdk.h -'t' 00-7F linux/if_ppp.h -'t' 80-8F linux/isdn_ppp.h -'u' 00-1F linux/smb_fs.h -'v' 00-1F linux/ext2_fs.h conflict! -'v' all linux/videodev.h conflict! -'w' all CERN SCI driver -'y' 00-1F packet based user level communications - -'z' 00-3F CAN bus card - -'z' 40-7F CAN bus card - -0x80 00-1F linux/fb.h -0x81 00-1F linux/videotext.h -0x89 00-06 asm-i386/sockios.h -0x89 0B-DF linux/sockios.h -0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range -0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range -0x8B all linux/wireless.h -0x8C 00-3F WiNRADiO driver - -0x90 00 drivers/cdrom/sbpcd.h -0x93 60-7F linux/auto_fs.h -0x99 00-0F 537-Addinboard driver - -0xA0 all linux/sdp/sdp.h Industrial Device Project - -0xA3 80-8F Port ACL in development: - -0xA3 90-9F linux/dtlk.h -0xAB 00-1F linux/nbd.h -0xAC 00-1F linux/raw.h -0xAD 00 Netfilter device in development: - -0xAE all linux/kvm.h Kernel-based Virtual Machine - -0xB0 all RATIO devices in development: - -0xB1 00-1F PPPoX -0xCB 00-1F CBM serial IEC bus in development: - -0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ - -0xF3 00-3F video/sisfb.h sisfb (in development) - -0xF4 00-1F video/mbxfb.h mbxfb - diff --git a/Documentation/ioctl/00-INDEX b/Documentation/ioctl/00-INDEX new file mode 100644 index 000000000000..d2fe4d4729ef --- /dev/null +++ b/Documentation/ioctl/00-INDEX @@ -0,0 +1,10 @@ +00-INDEX + - this file +cdrom.txt + - summary of CDROM ioctl calls +hdio.txt + - summary of HDIO_ ioctl calls +ioctl-decoding.txt + - how to decode the bits of an IOCTL code +ioctl-number.txt + - how to implement and register device/driver ioctl calls diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt new file mode 100644 index 000000000000..b880ce5dbd33 --- /dev/null +++ b/Documentation/ioctl/ioctl-number.txt @@ -0,0 +1,201 @@ +Ioctl Numbers +19 October 1999 +Michael Elizabeth Chastain + + +If you are adding new ioctl's to the kernel, you should use the _IO +macros defined in : + + _IO an ioctl with no parameters + _IOW an ioctl with write parameters (copy_from_user) + _IOR an ioctl with read parameters (copy_to_user) + _IOWR an ioctl with both write and read parameters. + +'Write' and 'read' are from the user's point of view, just like the +system calls 'write' and 'read'. For example, a SET_FOO ioctl would +be _IOW, although the kernel would actually read data from user space; +a GET_FOO ioctl would be _IOR, although the kernel would actually write +data to user space. + +The first argument to _IO, _IOW, _IOR, or _IOWR is an identifying letter +or number from the table below. Because of the large number of drivers, +many drivers share a partial letter with other drivers. + +If you are writing a driver for a new device and need a letter, pick an +unused block with enough room for expansion: 32 to 256 ioctl commands. +You can register the block by patching this file and submitting the +patch to Linus Torvalds. Or you can e-mail me at and +I'll register one for you. + +The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number +to distinguish ioctls from each other. The third argument to _IOW, +_IOR, or _IOWR is the type of the data going into the kernel or coming +out of the kernel (e.g. 'int' or 'struct foo'). NOTE! Do NOT use +sizeof(arg) as the third argument as this results in your ioctl thinking +it passes an argument of type size_t. + +Some devices use their major number as the identifier; this is OK, as +long as it is unique. Some devices are irregular and don't follow any +convention at all. + +Following this convention is good because: + +(1) Keeping the ioctl's globally unique helps error checking: + if a program calls an ioctl on the wrong device, it will get an + error rather than some unexpected behaviour. + +(2) The 'strace' build procedure automatically finds ioctl numbers + defined with _IO, _IOW, _IOR, or _IOWR. + +(3) 'strace' can decode numbers back into useful names when the + numbers are unique. + +(4) People looking for ioctls can grep for them more easily when + this convention is used to define the ioctl numbers. + +(5) When following the convention, the driver code can use generic + code to copy the parameters between user and kernel space. + +This table lists ioctls visible from user land for Linux/i386. It contains +most drivers up to 2.3.14, but I know I am missing some. + +Code Seq# Include File Comments +======================================================== +0x00 00-1F linux/fs.h conflict! +0x00 00-1F scsi/scsi_ioctl.h conflict! +0x00 00-1F linux/fb.h conflict! +0x00 00-1F linux/wavefront.h conflict! +0x02 all linux/fd.h +0x03 all linux/hdreg.h +0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these. +0x06 all linux/lp.h +0x09 all linux/md.h +0x12 all linux/fs.h + linux/blkpg.h +0x1b all InfiniBand Subsystem +0x20 all drivers/cdrom/cm206.h +0x22 all scsi/sg.h +'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem +'1' 00-1F PPS kit from Ulrich Windl + +'8' all SNP8023 advanced NIC card + +'A' 00-1F linux/apm_bios.h +'B' C0-FF advanced bbus + +'C' all linux/soundcard.h +'D' all asm-s390/dasd.h +'E' all linux/input.h +'F' all linux/fb.h +'H' all linux/hiddev.h +'I' all linux/isdn.h +'J' 00-1F drivers/scsi/gdth_ioctl.h +'K' all linux/kd.h +'L' 00-1F linux/loop.h +'L' 20-2F driver/usb/misc/vstusb.h +'L' E0-FF linux/ppdd.h encrypted disk device driver + +'M' all linux/soundcard.h +'N' 00-1F drivers/usb/scanner.h +'P' all linux/soundcard.h +'Q' all linux/soundcard.h +'R' 00-1F linux/random.h +'S' all linux/cdrom.h conflict! +'S' 80-81 scsi/scsi_ioctl.h conflict! +'S' 82-FF scsi/scsi.h conflict! +'T' all linux/soundcard.h conflict! +'T' all asm-i386/ioctls.h conflict! +'U' 00-EF linux/drivers/usb/usb.h +'V' all linux/vt.h +'W' 00-1F linux/watchdog.h conflict! +'W' 00-1F linux/wanrouter.h conflict! +'X' all linux/xfs_fs.h +'Y' all linux/cyclades.h +'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices + +'a' all ATM on linux + +'b' 00-FF bit3 vme host bridge + +'c' 00-7F linux/comstats.h conflict! +'c' 00-7F linux/coda.h conflict! +'c' 80-9F asm-s390/chsc.h +'d' 00-FF linux/char/drm/drm/h conflict! +'d' 00-DF linux/video_decoder.h conflict! +'d' F0-FF linux/digi1.h +'e' all linux/digi1.h conflict! +'e' 00-1F linux/video_encoder.h conflict! +'e' 00-1F net/irda/irtty.h conflict! +'f' 00-1F linux/ext2_fs.h +'h' 00-7F Charon filesystem + +'i' 00-3F linux/i2o.h +'j' 00-3F linux/joystick.h +'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system + +'l' 40-7F linux/udf_fs_i.h in development: + +'m' all linux/mtio.h conflict! +'m' all linux/soundcard.h conflict! +'m' all linux/synclink.h conflict! +'m' 00-1F net/irda/irmod.h conflict! +'n' 00-7F linux/ncp_fs.h +'n' E0-FF video/matrox.h matroxfb +'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2 +'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this) +'p' 00-3F linux/mc146818rtc.h conflict! +'p' 40-7F linux/nvram.h +'p' 80-9F user-space parport + +'q' 00-1F linux/serio.h +'q' 80-FF Internet PhoneJACK, Internet LineJACK + +'r' 00-1F linux/msdos_fs.h +'s' all linux/cdk.h +'t' 00-7F linux/if_ppp.h +'t' 80-8F linux/isdn_ppp.h +'u' 00-1F linux/smb_fs.h +'v' 00-1F linux/ext2_fs.h conflict! +'v' all linux/videodev.h conflict! +'w' all CERN SCI driver +'y' 00-1F packet based user level communications + +'z' 00-3F CAN bus card + +'z' 40-7F CAN bus card + +0x80 00-1F linux/fb.h +0x81 00-1F linux/videotext.h +0x89 00-06 asm-i386/sockios.h +0x89 0B-DF linux/sockios.h +0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range +0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range +0x8B all linux/wireless.h +0x8C 00-3F WiNRADiO driver + +0x90 00 drivers/cdrom/sbpcd.h +0x93 60-7F linux/auto_fs.h +0x99 00-0F 537-Addinboard driver + +0xA0 all linux/sdp/sdp.h Industrial Device Project + +0xA3 80-8F Port ACL in development: + +0xA3 90-9F linux/dtlk.h +0xAB 00-1F linux/nbd.h +0xAC 00-1F linux/raw.h +0xAD 00 Netfilter device in development: + +0xAE all linux/kvm.h Kernel-based Virtual Machine + +0xB0 all RATIO devices in development: + +0xB1 00-1F PPPoX +0xCB 00-1F CBM serial IEC bus in development: + +0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ + +0xF3 00-3F video/sisfb.h sisfb (in development) + +0xF4 00-1F video/mbxfb.h mbxfb + diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c600c4ffc657..9fa6508892c2 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -629,7 +629,7 @@ and is between 256 and 4096 characters. It is defined in the file digiepca= [HW,SERIAL] See drivers/char/README.epca and - Documentation/digiepca.txt. + Documentation/serial/digiepca.txt. disable_mtrr_cleanup [X86] enable_mtrr_cleanup [X86] @@ -740,7 +740,7 @@ and is between 256 and 4096 characters. It is defined in the file See header of drivers/scsi/fdomain.c. floppy= [HW] - See Documentation/floppy.txt. + See Documentation/blockdev/floppy.txt. force_pal_cache_flush [IA-64] Avoid check_sal_cache_flush which may hang on @@ -1101,7 +1101,7 @@ and is between 256 and 4096 characters. It is defined in the file the same attribute, the last one is used. load_ramdisk= [RAM] List of ramdisks to load from floppy - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. lockd.nlm_grace_period=P [NFS] Assign grace period. Format: @@ -1596,7 +1596,7 @@ and is between 256 and 4096 characters. It is defined in the file pcd. [PARIDE] See header of drivers/block/paride/pcd.c. - See also Documentation/paride.txt. + See also Documentation/blockdev/paride.txt. pci=option[,option...] [PCI] various PCI subsystem options: off [X86] don't probe for the PCI bus @@ -1697,7 +1697,7 @@ and is between 256 and 4096 characters. It is defined in the file pcmv= [HW,PCMCIA] BadgePAD 4 pd. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at boot time. @@ -1705,10 +1705,10 @@ and is between 256 and 4096 characters. It is defined in the file See arch/parisc/kernel/pdc_chassis.c pf. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pg. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pirq= [SMP,APIC] Manual mp-table setup See Documentation/x86/i386/IO-APIC.txt. @@ -1778,7 +1778,7 @@ and is between 256 and 4096 characters. It is defined in the file prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk before loading. - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to probe for; one of (bare|imps|exps|lifebook|any). @@ -1798,7 +1798,7 @@ and is between 256 and 4096 characters. It is defined in the file ,,,,, pt. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pty.legacy_count= [KNL] Number of legacy pty's. Overwrites compiled-in @@ -1812,10 +1812,10 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/md.txt. ramdisk_blocksize= [RAM] - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. ramdisk_size= [RAM] Sizes of RAM disks in kilobytes - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. rcupdate.blimit= [KNL,BOOT] Set maximum number of finished RCU callbacks to process @@ -2147,7 +2147,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/sonypi.txt specialix= [HW,SERIAL] Specialix multi-serial port adapter - See Documentation/specialix.txt. + See Documentation/serial/specialix.txt. spia_io_base= [HW,MTD] spia_fio_base= diff --git a/Documentation/moxa-smartio b/Documentation/moxa-smartio deleted file mode 100644 index 5337e80a5b96..000000000000 --- a/Documentation/moxa-smartio +++ /dev/null @@ -1,523 +0,0 @@ -============================================================================= - MOXA Smartio/Industio Family Device Driver Installation Guide - for Linux Kernel 2.4.x, 2.6.x - Copyright (C) 2008, Moxa Inc. -============================================================================= -Date: 01/21/2008 - -Content - -1. Introduction -2. System Requirement -3. Installation - 3.1 Hardware installation - 3.2 Driver files - 3.3 Device naming convention - 3.4 Module driver configuration - 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. - 3.6 Custom configuration - 3.7 Verify driver installation -4. Utilities -5. Setserial -6. Troubleshooting - ------------------------------------------------------------------------------ -1. Introduction - - The Smartio/Industio/UPCI family Linux driver supports following multiport - boards. - - - 2 ports multiport board - CP-102U, CP-102UL, CP-102UF - CP-132U-I, CP-132UL, - CP-132, CP-132I, CP132S, CP-132IS, - CI-132, CI-132I, CI-132IS, - (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) - - - 4 ports multiport board - CP-104EL, - CP-104UL, CP-104JU, - CP-134U, CP-134U-I, - C104H/PCI, C104HS/PCI, - CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, - C104H, C104HS, - CI-104J, CI-104JS, - CI-134, CI-134I, CI-134IS, - (C114HI, CT-114I, C104P) - POS-104UL, - CB-114, - CB-134I - - - 8 ports multiport board - CP-118EL, CP-168EL, - CP-118U, CP-168U, - C168H/PCI, - C168H, C168HS, - (C168P), - CB-108 - - This driver and installation procedure have been developed upon Linux Kernel - 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order - to maintain compatibility, this version has also been properly tested with - RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem - occurs, please contact Moxa at support@moxa.com.tw. - - In addition to device driver, useful utilities are also provided in this - version. They are - - msdiag Diagnostic program for displaying installed Moxa - Smartio/Industio boards. - - msmon Monitor program to observe data count and line status signals. - - msterm A simple terminal program which is useful in testing serial - ports. - - io-irq.exe Configuration program to setup ISA boards. Please note that - this program can only be executed under DOS. - - All the drivers and utilities are published in form of source code under - GNU General Public License in this version. Please refer to GNU General - Public License announcement in each source code file for more detail. - - In Moxa's Web sites, you may always find latest driver at http://web.moxa.com. - - This version of driver can be installed as Loadable Module (Module driver) - or built-in into kernel (Static driver). You may refer to following - installation procedure for suitable one. Before you install the driver, - please refer to hardware installation procedure in the User's Manual. - - We assume the user should be familiar with following documents. - - Serial-HOWTO - - Kernel-HOWTO - ------------------------------------------------------------------------------ -2. System Requirement - - Hardware platform: Intel x86 machine - - Kernel version: 2.4.x or 2.6.x - - gcc version 2.72 or later - - Maximum 4 boards can be installed in combination - ------------------------------------------------------------------------------ -3. Installation - - 3.1 Hardware installation - 3.2 Driver files - 3.3 Device naming convention - 3.4 Module driver configuration - 3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x. - 3.6 Custom configuration - 3.7 Verify driver installation - - - 3.1 Hardware installation - - There are two types of buses, ISA and PCI, for Smartio/Industio - family multiport board. - - ISA board - --------- - You'll have to configure CAP address, I/O address, Interrupt Vector - as well as IRQ before installing this driver. Please refer to hardware - installation procedure in User's Manual before proceed any further. - Please make sure the JP1 is open after the ISA board is set properly. - - PCI/UPCI board - -------------- - You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict - with other ISA devices. Please refer to hardware installation - procedure in User's Manual in advance. - - PCI IRQ Sharing - ----------- - Each port within the same multiport board shares the same IRQ. Up to - 4 Moxa Smartio/Industio PCI Family multiport boards can be installed - together on one system and they can share the same IRQ. - - - 3.2 Driver files - - The driver file may be obtained from ftp, CD-ROM or floppy disk. The - first step, anyway, is to copy driver file "mxser.tgz" into specified - directory. e.g. /moxa. The execute commands as below. - - # cd / - # mkdir moxa - # cd /moxa - # tar xvf /dev/fd0 - - or - - # cd / - # mkdir moxa - # cd /moxa - # cp /mnt/cdrom//mxser.tgz . - # tar xvfz mxser.tgz - - - 3.3 Device naming convention - - You may find all the driver and utilities files in /moxa/mxser. - Following installation procedure depends on the model you'd like to - run the driver. If you prefer module driver, please refer to 3.4. - If static driver is required, please refer to 3.5. - - Dialin and callout port - ----------------------- - This driver remains traditional serial device properties. There are - two special file name for each serial port. One is dial-in port - which is named "ttyMxx". For callout port, the naming convention - is "cumxx". - - Device naming when more than 2 boards installed - ----------------------------------------------- - Naming convention for each Smartio/Industio multiport board is - pre-defined as below. - - Board Num. Dial-in Port Callout port - 1st board ttyM0 - ttyM7 cum0 - cum7 - 2nd board ttyM8 - ttyM15 cum8 - cum15 - 3rd board ttyM16 - ttyM23 cum16 - cum23 - 4th board ttyM24 - ttym31 cum24 - cum31 - - - !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - Under Kernel 2.6 the cum Device is Obsolete. So use ttyM* - device instead. - !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - - Board sequence - -------------- - This driver will activate ISA boards according to the parameter set - in the driver. After all specified ISA board activated, PCI board - will be installed in the system automatically driven. - Therefore the board number is sorted by the CAP address of ISA boards. - For PCI boards, their sequence will be after ISA boards and C168H/PCI - has higher priority than C104H/PCI boards. - - 3.4 Module driver configuration - Module driver is easiest way to install. If you prefer static driver - installation, please skip this paragraph. - - - ------------- Prepare to use the MOXA driver-------------------- - 3.4.1 Create tty device with correct major number - Before using MOXA driver, your system must have the tty devices - which are created with driver's major number. We offer one shell - script "msmknod" to simplify the procedure. - This step is only needed to be executed once. But you still - need to do this procedure when: - a. You change the driver's major number. Please refer the "3.7" - section. - b. Your total installed MOXA boards number is changed. Maybe you - add/delete one MOXA board. - c. You want to change the tty name. This needs to modify the - shell script "msmknod" - - The procedure is: - # cd /moxa/mxser/driver - # ./msmknod - - This shell script will require the major number for dial-in - device and callout device to create tty device. You also need - to specify the total installed MOXA board number. Default major - numbers for dial-in device and callout device are 30, 35. If - you need to change to other number, please refer section "3.7" - for more detailed procedure. - Msmknod will delete any special files occupying the same device - naming. - - 3.4.2 Build the MOXA driver and utilities - Before using the MOXA driver and utilities, you need compile the - all the source code. This step is only need to be executed once. - But you still re-compile the source code if you modify the source - code. For example, if you change the driver's major number (see - "3.7" section), then you need to do this step again. - - Find "Makefile" in /moxa/mxser, then run - - # make clean; make install - - !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! - For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: - # make clean; make installsp1 - - For Red Hat Enterprise Linux AS4/ES4/WS4: - # make clean; make installsp2 - !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! - - The driver files "mxser.o" and utilities will be properly compiled - and copied to system directories respectively. - - ------------- Load MOXA driver-------------------- - 3.4.3 Load the MOXA driver - - # modprobe mxser - - will activate the module driver. You may run "lsmod" to check - if "mxser" is activated. If the MOXA board is ISA board, the - is needed. Please refer to section "3.4.5" for more - information. - - - ------------- Load MOXA driver on boot -------------------- - 3.4.4 For the above description, you may manually execute - "modprobe mxser" to activate this driver and run - "rmmod mxser" to remove it. - However, it's better to have a boot time configuration to - eliminate manual operation. Boot time configuration can be - achieved by rc file. We offer one "rc.mxser" file to simplify - the procedure under "moxa/mxser/driver". - - But if you use ISA board, please modify the "modprobe ..." command - to add the argument (see "3.4.5" section). After modifying the - rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" - manually to make sure the modification is ok. If any error - encountered, please try to modify again. If the modification is - completed, follow the below step. - - Run following command for setting rc files. - - # cd /moxa/mxser/driver - # cp ./rc.mxser /etc/rc.d - # cd /etc/rc.d - - Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, - create it by vi, run "chmod 755 rc.serial" to change the permission. - Add "/etc/rc.d/rc.mxser" in last line, - - Reboot and check if moxa.o activated by "lsmod" command. - - 3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system, - you'll have to add parameter to specify CAP address of given - board while activating "mxser.o". The format for parameters are - as follows. - - modprobe mxser ioaddr=0x???,0x???,0x???,0x??? - | | | | - | | | +- 4th ISA board - | | +------ 3rd ISA board - | +------------ 2nd ISA board - +------------------- 1st ISA board - - 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x - - Note: To use static driver, you must install the linux kernel - source package. - - 3.5.1 Backup the built-in driver in the kernel. - # cd /usr/src/linux/drivers/char - # mv mxser.c mxser.c.old - - For Red Hat 7.x user, you need to create link: - # cd /usr/src - # ln -s linux-2.4 linux - - 3.5.2 Create link - # cd /usr/src/linux/drivers/char - # ln -s /moxa/mxser/driver/mxser.c mxser.c - - 3.5.3 Add CAP address list for ISA boards. For PCI boards user, - please skip this step. - - In module mode, the CAP address for ISA board is given by - parameter. In static driver configuration, you'll have to - assign it within driver's source code. If you will not - install any ISA boards, you may skip to next portion. - The instructions to modify driver source code are as - below. - a. # cd /moxa/mxser/driver - # vi mxser.c - b. Find the array mxserBoardCAP[] as below. - - static int mxserBoardCAP[] - = {0x00, 0x00, 0x00, 0x00}; - - c. Change the address within this array using vi. For - example, to driver 2 ISA boards with CAP address - 0x280 and 0x180 as 1st and 2nd board. Just to change - the source code as follows. - - static int mxserBoardCAP[] - = {0x280, 0x180, 0x00, 0x00}; - - 3.5.4 Setup kernel configuration - - Configure the kernel: - - # cd /usr/src/linux - # make menuconfig - - You will go into a menu-driven system. Please select [Character - devices][Non-standard serial port support], enable the [Moxa - SmartIO support] driver with "[*]" for built-in (not "[M]"), then - select [Exit] to exit this program. - - 3.5.5 Rebuild kernel - The following are for Linux kernel rebuilding, for your - reference only. - For appropriate details, please refer to the Linux document. - - a. cd /usr/src/linux - b. make clean /* take a few minutes */ - c. make dep /* take a few minutes */ - d. make bzImage /* take probably 10-20 minutes */ - e. make install /* copy boot image to correct position */ - f. Please make sure the boot kernel (vmlinuz) is in the - correct position. - g. If you use 'lilo' utility, you should check /etc/lilo.conf - 'image' item specified the path which is the 'vmlinuz' path, - or you will load wrong (or old) boot kernel image (vmlinuz). - After checking /etc/lilo.conf, please run "lilo". - - Note that if the result of "make bzImage" is ERROR, then you have to - go back to Linux configuration Setup. Type "make menuconfig" in - directory /usr/src/linux. - - - 3.5.6 Make tty device and special file - # cd /moxa/mxser/driver - # ./msmknod - - 3.5.7 Make utility - # cd /moxa/mxser/utility - # make clean; make install - - 3.5.8 Reboot - - - - 3.6 Custom configuration - Although this driver already provides you default configuration, you - still can change the device name and major number. The instruction to - change these parameters are shown as below. - - Change Device name - ------------------ - If you'd like to use other device names instead of default naming - convention, all you have to do is to modify the internal code - within the shell script "msmknod". First, you have to open "msmknod" - by vi. Locate each line contains "ttyM" and "cum" and change them - to the device name you desired. "msmknod" creates the device names - you need next time executed. - - Change Major number - ------------------- - If major number 30 and 35 had been occupied, you may have to select - 2 free major numbers for this driver. There are 3 steps to change - major numbers. - - 3.6.1 Find free major numbers - In /proc/devices, you may find all the major numbers occupied - in the system. Please select 2 major numbers that are available. - e.g. 40, 45. - 3.6.2 Create special files - Run /moxa/mxser/driver/msmknod to create special files with - specified major numbers. - 3.6.3 Modify driver with new major number - Run vi to open /moxa/mxser/driver/mxser.c. Locate the line - contains "MXSERMAJOR". Change the content as below. - #define MXSERMAJOR 40 - #define MXSERCUMAJOR 45 - 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. - - 3.7 Verify driver installation - You may refer to /var/log/messages to check the latest status - log reported by this driver whenever it's activated. - ------------------------------------------------------------------------------ -4. Utilities - There are 3 utilities contained in this driver. They are msdiag, msmon and - msterm. These 3 utilities are released in form of source code. They should - be compiled into executable file and copied into /usr/bin. - - Before using these utilities, please load driver (refer 3.4 & 3.5) and - make sure you had run the "msmknod" utility. - - msdiag - Diagnostic - -------------------- - This utility provides the function to display what Moxa Smartio/Industio - board found by driver in the system. - - msmon - Port Monitoring - ----------------------- - This utility gives the user a quick view about all the MOXA ports' - activities. One can easily learn each port's total received/transmitted - (Rx/Tx) character count since the time when the monitoring is started. - Rx/Tx throughputs per second are also reported in interval basis (e.g. - the last 5 seconds) and in average basis (since the time the monitoring - is started). You can reset all ports' count by key. <+> <-> - (plus/minus) keys to change the displaying time interval. Press - on the port, that cursor stay, to view the port's communication - parameters, signal status, and input/output queue. - - msterm - Terminal Emulation - --------------------------- - This utility provides data sending and receiving ability of all tty ports, - especially for MOXA ports. It is quite useful for testing simple - application, for example, sending AT command to a modem connected to the - port or used as a terminal for login purpose. Note that this is only a - dumb terminal emulation without handling full screen operation. - ------------------------------------------------------------------------------ -5. Setserial - - Supported Setserial parameters are listed as below. - - uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) - close_delay set the amount of time(in 1/100 of a second) that DTR - should be kept low while being closed. - closing_wait set the amount of time(in 1/100 of a second) that the - serial port should wait for data to be drained while - being closed, before the receiver is disable. - spd_hi Use 57.6kb when the application requests 38.4kb. - spd_vhi Use 115.2kb when the application requests 38.4kb. - spd_shi Use 230.4kb when the application requests 38.4kb. - spd_warp Use 460.8kb when the application requests 38.4kb. - spd_normal Use 38.4kb when the application requests 38.4kb. - spd_cust Use the custom divisor to set the speed when the - application requests 38.4kb. - divisor This option set the custom divison. - baud_base This option set the base baud rate. - ------------------------------------------------------------------------------ -6. Troubleshooting - - The boot time error messages and solutions are stated as clearly as - possible. If all the possible solutions fail, please contact our technical - support team to get more help. - - - Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board - and after are ignored. - Solution: - To avoid this problem, please unplug fifth and after board, because Moxa - driver supports up to 4 boards. - - Error msg: Request_irq fail, IRQ(?) may be conflict with another device. - Solution: - Other PCI or ISA devices occupy the assigned IRQ. If you are not sure - which device causes the situation, please check /proc/interrupts to find - free IRQ and simply change another free IRQ for Moxa board. - - Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid. - Solution: - Each port within the same multiport board shares the same IRQ. Please set - one IRQ (IRQ doesn't equal to zero) for one Moxa board. - - Error msg: No interrupt vector be set for Moxa ISA board(CAP=xxx). - Solution: - Moxa ISA board needs an interrupt vector.Please refer to user's manual - "Hardware Installation" chapter to set interrupt vector. - - Error msg: Couldn't install MOXA Smartio/Industio family driver! - Solution: - Load Moxa driver fail, the major number may conflict with other devices. - Please refer to previous section 3.7 to change a free major number for - Moxa driver. - - Error msg: Couldn't install MOXA Smartio/Industio family callout driver! - Solution: - Load Moxa callout driver fail, the callout device major number may - conflict with other devices. Please refer to previous section 3.7 to - change a free callout device major number for Moxa driver. - - ------------------------------------------------------------------------------ - diff --git a/Documentation/nbd.txt b/Documentation/nbd.txt deleted file mode 100644 index aeb93ffe6416..000000000000 --- a/Documentation/nbd.txt +++ /dev/null @@ -1,47 +0,0 @@ - Network Block Device (TCP version) - - What is it: With this compiled in the kernel (or as a module), Linux - can use a remote server as one of its block devices. So every time - the client computer wants to read, e.g., /dev/nb0, it sends a - request over TCP to the server, which will reply with the data read. - This can be used for stations with low disk space (or even diskless - - if you boot from floppy) to borrow disk space from another computer. - Unlike NFS, it is possible to put any filesystem on it, etc. It should - even be possible to use NBD as a root filesystem (I've never tried), - but it requires a user-level program to be in the initrd to start. - It also allows you to run block-device in user land (making server - and client physically the same computer, communicating using loopback). - - Current state: It currently works. Network block device is stable. - I originally thought that it was impossible to swap over TCP. It - turned out not to be true - swapping over TCP now works and seems - to be deadlock-free, but it requires heavy patches into Linux's - network layer. - - For more information, or to download the nbd-client and nbd-server - tools, go to http://nbd.sf.net/. - - Howto: To setup nbd, you can simply do the following: - - First, serve a device or file from a remote server: - - nbd-server - - e.g., - root@server1 # nbd-server 1234 /dev/sdb1 - - (serves sdb1 partition on TCP port 1234) - - Then, on the local (client) system: - - nbd-client /dev/nb[0-n] - - e.g., - root@client1 # nbd-client server1 1234 /dev/nb0 - - (creates the nb0 device on client1) - - The nbd kernel module need only be installed on the client - system, as the nbd-server is completely in userspace. In fact, - the nbd-server has been successfully ported to other operating - systems, including Windows. diff --git a/Documentation/paride.txt b/Documentation/paride.txt deleted file mode 100644 index e4312676bdda..000000000000 --- a/Documentation/paride.txt +++ /dev/null @@ -1,417 +0,0 @@ - - Linux and parallel port IDE devices - -PARIDE v1.03 (c) 1997-8 Grant Guenther - -1. Introduction - -Owing to the simplicity and near universality of the parallel port interface -to personal computers, many external devices such as portable hard-disk, -CD-ROM, LS-120 and tape drives use the parallel port to connect to their -host computer. While some devices (notably scanners) use ad-hoc methods -to pass commands and data through the parallel port interface, most -external devices are actually identical to an internal model, but with -a parallel-port adapter chip added in. Some of the original parallel port -adapters were little more than mechanisms for multiplexing a SCSI bus. -(The Iomega PPA-3 adapter used in the ZIP drives is an example of this -approach). Most current designs, however, take a different approach. -The adapter chip reproduces a small ISA or IDE bus in the external device -and the communication protocol provides operations for reading and writing -device registers, as well as data block transfer functions. Sometimes, -the device being addressed via the parallel cable is a standard SCSI -controller like an NCR 5380. The "ditto" family of external tape -drives use the ISA replicator to interface a floppy disk controller, -which is then connected to a floppy-tape mechanism. The vast majority -of external parallel port devices, however, are now based on standard -IDE type devices, which require no intermediate controller. If one -were to open up a parallel port CD-ROM drive, for instance, one would -find a standard ATAPI CD-ROM drive, a power supply, and a single adapter -that interconnected a standard PC parallel port cable and a standard -IDE cable. It is usually possible to exchange the CD-ROM device with -any other device using the IDE interface. - -The document describes the support in Linux for parallel port IDE -devices. It does not cover parallel port SCSI devices, "ditto" tape -drives or scanners. Many different devices are supported by the -parallel port IDE subsystem, including: - - MicroSolutions backpack CD-ROM - MicroSolutions backpack PD/CD - MicroSolutions backpack hard-drives - MicroSolutions backpack 8000t tape drive - SyQuest EZ-135, EZ-230 & SparQ drives - Avatar Shark - Imation Superdisk LS-120 - Maxell Superdisk LS-120 - FreeCom Power CD - Hewlett-Packard 5GB and 8GB tape drives - Hewlett-Packard 7100 and 7200 CD-RW drives - -as well as most of the clone and no-name products on the market. - -To support such a wide range of devices, PARIDE, the parallel port IDE -subsystem, is actually structured in three parts. There is a base -paride module which provides a registry and some common methods for -accessing the parallel ports. The second component is a set of -high-level drivers for each of the different types of supported devices: - - pd IDE disk - pcd ATAPI CD-ROM - pf ATAPI disk - pt ATAPI tape - pg ATAPI generic - -(Currently, the pg driver is only used with CD-R drives). - -The high-level drivers function according to the relevant standards. -The third component of PARIDE is a set of low-level protocol drivers -for each of the parallel port IDE adapter chips. Thanks to the interest -and encouragement of Linux users from many parts of the world, -support is available for almost all known adapter protocols: - - aten ATEN EH-100 (HK) - bpck Microsolutions backpack (US) - comm DataStor (old-type) "commuter" adapter (TW) - dstr DataStor EP-2000 (TW) - epat Shuttle EPAT (UK) - epia Shuttle EPIA (UK) - fit2 FIT TD-2000 (US) - fit3 FIT TD-3000 (US) - friq Freecom IQ cable (DE) - frpw Freecom Power (DE) - kbic KingByte KBIC-951A and KBIC-971A (TW) - ktti KT Technology PHd adapter (SG) - on20 OnSpec 90c20 (US) - on26 OnSpec 90c26 (US) - - -2. Using the PARIDE subsystem - -While configuring the Linux kernel, you may choose either to build -the PARIDE drivers into your kernel, or to build them as modules. - -In either case, you will need to select "Parallel port IDE device support" -as well as at least one of the high-level drivers and at least one -of the parallel port communication protocols. If you do not know -what kind of parallel port adapter is used in your drive, you could -begin by checking the file names and any text files on your DOS -installation floppy. Alternatively, you can look at the markings on -the adapter chip itself. That's usually sufficient to identify the -correct device. - -You can actually select all the protocol modules, and allow the PARIDE -subsystem to try them all for you. - -For the "brand-name" products listed above, here are the protocol -and high-level drivers that you would use: - - Manufacturer Model Driver Protocol - - MicroSolutions CD-ROM pcd bpck - MicroSolutions PD drive pf bpck - MicroSolutions hard-drive pd bpck - MicroSolutions 8000t tape pt bpck - SyQuest EZ, SparQ pd epat - Imation Superdisk pf epat - Maxell Superdisk pf friq - Avatar Shark pd epat - FreeCom CD-ROM pcd frpw - Hewlett-Packard 5GB Tape pt epat - Hewlett-Packard 7200e (CD) pcd epat - Hewlett-Packard 7200e (CD-R) pg epat - -2.1 Configuring built-in drivers - -We recommend that you get to know how the drivers work and how to -configure them as loadable modules, before attempting to compile a -kernel with the drivers built-in. - -If you built all of your PARIDE support directly into your kernel, -and you have just a single parallel port IDE device, your kernel should -locate it automatically for you. If you have more than one device, -you may need to give some command line options to your bootloader -(eg: LILO), how to do that is beyond the scope of this document. - -The high-level drivers accept a number of command line parameters, all -of which are documented in the source files in linux/drivers/block/paride. -By default, each driver will automatically try all parallel ports it -can find, and all protocol types that have been installed, until it finds -a parallel port IDE adapter. Once it finds one, the probe stops. So, -if you have more than one device, you will need to tell the drivers -how to identify them. This requires specifying the port address, the -protocol identification number and, for some devices, the drive's -chain ID. While your system is booting, a number of messages are -displayed on the console. Like all such messages, they can be -reviewed with the 'dmesg' command. Among those messages will be -some lines like: - - paride: bpck registered as protocol 0 - paride: epat registered as protocol 1 - -The numbers will always be the same until you build a new kernel with -different protocol selections. You should note these numbers as you -will need them to identify the devices. - -If you happen to be using a MicroSolutions backpack device, you will -also need to know the unit ID number for each drive. This is usually -the last two digits of the drive's serial number (but read MicroSolutions' -documentation about this). - -As an example, let's assume that you have a MicroSolutions PD/CD drive -with unit ID number 36 connected to the parallel port at 0x378, a SyQuest -EZ-135 connected to the chained port on the PD/CD drive and also an -Imation Superdisk connected to port 0x278. You could give the following -options on your boot command: - - pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36 - -In the last option, pf.drive1 configures device /dev/pf1, the 0x378 -is the parallel port base address, the 0 is the protocol registration -number and 36 is the chain ID. - -Please note: while PARIDE will work both with and without the -PARPORT parallel port sharing system that is included by the -"Parallel port support" option, PARPORT must be included and enabled -if you want to use chains of devices on the same parallel port. - -2.2 Loading and configuring PARIDE as modules - -It is much faster and simpler to get to understand the PARIDE drivers -if you use them as loadable kernel modules. - -Note 1: using these drivers with the "kerneld" automatic module loading -system is not recommended for beginners, and is not documented here. - -Note 2: if you build PARPORT support as a loadable module, PARIDE must -also be built as loadable modules, and PARPORT must be loaded before the -PARIDE modules. - -To use PARIDE, you must begin by - - insmod paride - -this loads a base module which provides a registry for the protocols, -among other tasks. - -Then, load as many of the protocol modules as you think you might need. -As you load each module, it will register the protocols that it supports, -and print a log message to your kernel log file and your console. For -example: - - # insmod epat - paride: epat registered as protocol 0 - # insmod kbic - paride: k951 registered as protocol 1 - paride: k971 registered as protocol 2 - -Finally, you can load high-level drivers for each kind of device that -you have connected. By default, each driver will autoprobe for a single -device, but you can support up to four similar devices by giving their -individual co-ordinates when you load the driver. - -For example, if you had two no-name CD-ROM drives both using the -KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc -you could give the following command: - - # insmod pcd drive0=0x378,1 drive1=0x3bc,1 - -For most adapters, giving a port address and protocol number is sufficient, -but check the source files in linux/drivers/block/paride for more -information. (Hopefully someone will write some man pages one day !). - -As another example, here's what happens when PARPORT is installed, and -a SyQuest EZ-135 is attached to port 0x378: - - # insmod paride - paride: version 1.0 installed - # insmod epat - paride: epat registered as protocol 0 - # insmod pd - pd: pd version 1.0, major 45, cluster 64, nice 0 - pda: Sharing parport1 at 0x378 - pda: epat 1.0, Shuttle EPAT chip c3 at 0x378, mode 5 (EPP-32), delay 1 - pda: SyQuest EZ135A, 262144 blocks [128M], (512/16/32), removable media - pda: pda1 - -Note that the last line is the output from the generic partition table -scanner - in this case it reports that it has found a disk with one partition. - -2.3 Using a PARIDE device - -Once the drivers have been loaded, you can access PARIDE devices in the -same way as their traditional counterparts. You will probably need to -create the device "special files". Here is a simple script that you can -cut to a file and execute: - -#!/bin/bash -# -# mkd -- a script to create the device special files for the PARIDE subsystem -# -function mkdev { - mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1 -} -# -function pd { - D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) ) - mkdev pd$D b 45 $[ $1 * 16 ] - for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 - do mkdev pd$D$P b 45 $[ $1 * 16 + $P ] - done -} -# -cd /dev -# -for u in 0 1 2 3 ; do pd $u ; done -for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done -for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done -for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done -for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done -for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done -# -# end of mkd - -With the device files and drivers in place, you can access PARIDE devices -like any other Linux device. For example, to mount a CD-ROM in pcd0, use: - - mount /dev/pcd0 /cdrom - -If you have a fresh Avatar Shark cartridge, and the drive is pda, you -might do something like: - - fdisk /dev/pda -- make a new partition table with - partition 1 of type 83 - - mke2fs /dev/pda1 -- to build the file system - - mkdir /shark -- make a place to mount the disk - - mount /dev/pda1 /shark - -Devices like the Imation superdisk work in the same way, except that -they do not have a partition table. For example to make a 120MB -floppy that you could share with a DOS system: - - mkdosfs /dev/pf0 - mount /dev/pf0 /mnt - - -2.4 The pf driver - -The pf driver is intended for use with parallel port ATAPI disk -devices. The most common devices in this category are PD drives -and LS-120 drives. Traditionally, media for these devices are not -partitioned. Consequently, the pf driver does not support partitioned -media. This may be changed in a future version of the driver. - -2.5 Using the pt driver - -The pt driver for parallel port ATAPI tape drives is a minimal driver. -It does not yet support many of the standard tape ioctl operations. -For best performance, a block size of 32KB should be used. You will -probably want to set the parallel port delay to 0, if you can. - -2.6 Using the pg driver - -The pg driver can be used in conjunction with the cdrecord program -to create CD-ROMs. Please get cdrecord version 1.6.1 or later -from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ . To record CD-R media -your parallel port should ideally be set to EPP mode, and the "port delay" -should be set to 0. With those settings it is possible to record at 2x -speed without any buffer underruns. If you cannot get the driver to work -in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only. - - -3. Troubleshooting - -3.1 Use EPP mode if you can - -The most common problems that people report with the PARIDE drivers -concern the parallel port CMOS settings. At this time, none of the -PARIDE protocol modules support ECP mode, or any ECP combination modes. -If you are able to do so, please set your parallel port into EPP mode -using your CMOS setup procedure. - -3.2 Check the port delay - -Some parallel ports cannot reliably transfer data at full speed. To -offset the errors, the PARIDE protocol modules introduce a "port -delay" between each access to the i/o ports. Each protocol sets -a default value for this delay. In most cases, the user can override -the default and set it to 0 - resulting in somewhat higher transfer -rates. In some rare cases (especially with older 486 systems) the -default delays are not long enough. if you experience corrupt data -transfers, or unexpected failures, you may wish to increase the -port delay. The delay can be programmed using the "driveN" parameters -to each of the high-level drivers. Please see the notes above, or -read the comments at the beginning of the driver source files in -linux/drivers/block/paride. - -3.3 Some drives need a printer reset - -There appear to be a number of "noname" external drives on the market -that do not always power up correctly. We have noticed this with some -drives based on OnSpec and older Freecom adapters. In these rare cases, -the adapter can often be reinitialised by issuing a "printer reset" on -the parallel port. As the reset operation is potentially disruptive in -multiple device environments, the PARIDE drivers will not do it -automatically. You can however, force a printer reset by doing: - - insmod lp reset=1 - rmmod lp - -If you have one of these marginal cases, you should probably build -your paride drivers as modules, and arrange to do the printer reset -before loading the PARIDE drivers. - -3.4 Use the verbose option and dmesg if you need help - -While a lot of testing has gone into these drivers to make them work -as smoothly as possible, problems will arise. If you do have problems, -please check all the obvious things first: does the drive work in -DOS with the manufacturer's drivers ? If that doesn't yield any useful -clues, then please make sure that only one drive is hooked to your system, -and that either (a) PARPORT is enabled or (b) no other device driver -is using your parallel port (check in /proc/ioports). Then, load the -appropriate drivers (you can load several protocol modules if you want) -as in: - - # insmod paride - # insmod epat - # insmod bpck - # insmod kbic - ... - # insmod pd verbose=1 - -(using the correct driver for the type of device you have, of course). -The verbose=1 parameter will cause the drivers to log a trace of their -activity as they attempt to locate your drive. - -Use 'dmesg' to capture a log of all the PARIDE messages (any messages -beginning with paride:, a protocol module's name or a driver's name) and -include that with your bug report. You can submit a bug report in one -of two ways. Either send it directly to the author of the PARIDE suite, -by e-mail to grant@torque.net, or join the linux-parport mailing list -and post your report there. - -3.5 For more information or help - -You can join the linux-parport mailing list by sending a mail message -to - linux-parport-request@torque.net - -with the single word - - subscribe - -in the body of the mail message (not in the subject line). Please be -sure that your mail program is correctly set up when you do this, as -the list manager is a robot that will subscribe you using the reply -address in your mail headers. REMOVE any anti-spam gimmicks you may -have in your mail headers, when sending mail to the list server. - -You might also find some useful information on the linux-parport -web pages (although they are not always up to date) at - - http://www.torque.net/parport/ - - diff --git a/Documentation/ramdisk.txt b/Documentation/ramdisk.txt deleted file mode 100644 index 6c820baa19a6..000000000000 --- a/Documentation/ramdisk.txt +++ /dev/null @@ -1,165 +0,0 @@ -Using the RAM disk block device with Linux ------------------------------------------- - -Contents: - - 1) Overview - 2) Kernel Command Line Parameters - 3) Using "rdev -r" - 4) An Example of Creating a Compressed RAM Disk - - -1) Overview ------------ - -The RAM disk driver is a way to use main system memory as a block device. It -is required for initrd, an initial filesystem used if you need to load modules -in order to access the root filesystem (see Documentation/initrd.txt). It can -also be used for a temporary filesystem for crypto work, since the contents -are erased on reboot. - -The RAM disk dynamically grows as more space is required. It does this by using -RAM from the buffer cache. The driver marks the buffers it is using as dirty -so that the VM subsystem does not try to reclaim them later. - -The RAM disk supports up to 16 RAM disks by default, and can be reconfigured -to support an unlimited number of RAM disks (at your own risk). Just change -the configuration symbol BLK_DEV_RAM_COUNT in the Block drivers config menu -and (re)build the kernel. - -To use RAM disk support with your system, run './MAKEDEV ram' from the /dev -directory. RAM disks are all major number 1, and start with minor number 0 -for /dev/ram0, etc. If used, modern kernels use /dev/ram0 for an initrd. - -The new RAM disk also has the ability to load compressed RAM disk images, -allowing one to squeeze more programs onto an average installation or -rescue floppy disk. - - -2) Kernel Command Line Parameters ---------------------------------- - - ramdisk_size=N - ============== - -This parameter tells the RAM disk driver to set up RAM disks of N k size. The -default is 4096 (4 MB) (8192 (8 MB) on S390). - - ramdisk_blocksize=N - =================== - -This parameter tells the RAM disk driver how many bytes to use per block. The -default is 1024 (BLOCK_SIZE). - - -3) Using "rdev -r" ------------------- - -The usage of the word (two bytes) that "rdev -r" sets in the kernel image is -as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up -to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit -14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a -prompt/wait sequence is to be given before trying to read the RAM disk. Since -the RAM disk dynamically grows as data is being written into it, a size field -is not required. Bits 11 to 13 are not currently used and may as well be zero. -These numbers are no magical secrets, as seen below: - -./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF -./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 -./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 - -Consider a typical two floppy disk setup, where you will have the -kernel on disk one, and have already put a RAM disk image onto disk #2. - -Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk -starts at an offset of 0 kB from the beginning of the floppy. -The command line equivalent is: "ramdisk_start=0" - -You want bit 14 as one, indicating that a RAM disk is to be loaded. -The command line equivalent is: "load_ramdisk=1" - -You want bit 15 as one, indicating that you want a prompt/keypress -sequence so that you have a chance to switch floppy disks. -The command line equivalent is: "prompt_ramdisk=1" - -Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word. -So to create disk one of the set, you would do: - - /usr/src/linux# cat arch/i386/boot/zImage > /dev/fd0 - /usr/src/linux# rdev /dev/fd0 /dev/fd0 - /usr/src/linux# rdev -r /dev/fd0 49152 - -If you make a boot disk that has LILO, then for the above, you would use: - append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1" -Since the default start = 0 and the default prompt = 1, you could use: - append = "load_ramdisk=1" - - -4) An Example of Creating a Compressed RAM Disk ----------------------------------------------- - -To create a RAM disk image, you will need a spare block device to -construct it on. This can be the RAM disk device itself, or an -unused disk partition (such as an unmounted swap partition). For this -example, we will use the RAM disk device, "/dev/ram0". - -Note: This technique should not be done on a machine with less than 8 MB -of RAM. If using a spare disk partition instead of /dev/ram0, then this -restriction does not apply. - -a) Decide on the RAM disk size that you want. Say 2 MB for this example. - Create it by writing to the RAM disk device. (This step is not currently - required, but may be in the future.) It is wise to zero out the - area (esp. for disks) so that maximal compression is achieved for - the unused blocks of the image that you are about to create. - - dd if=/dev/zero of=/dev/ram0 bs=1k count=2048 - -b) Make a filesystem on it. Say ext2fs for this example. - - mke2fs -vm0 /dev/ram0 2048 - -c) Mount it, copy the files you want to it (eg: /etc/* /dev/* ...) - and unmount it again. - -d) Compress the contents of the RAM disk. The level of compression - will be approximately 50% of the space used by the files. Unused - space on the RAM disk will compress to almost nothing. - - dd if=/dev/ram0 bs=1k count=2048 | gzip -v9 > /tmp/ram_image.gz - -e) Put the kernel onto the floppy - - dd if=zImage of=/dev/fd0 bs=1k - -f) Put the RAM disk image onto the floppy, after the kernel. Use an offset - that is slightly larger than the kernel, so that you can put another - (possibly larger) kernel onto the same floppy later without overlapping - the RAM disk image. An offset of 400 kB for kernels about 350 kB in - size would be reasonable. Make sure offset+size of ram_image.gz is - not larger than the total space on your floppy (usually 1440 kB). - - dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400 - -g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc. - For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would - have 2^15 + 2^14 + 400 = 49552. - - rdev /dev/fd0 /dev/fd0 - rdev -r /dev/fd0 49552 - -That is it. You now have your boot/root compressed RAM disk floppy. Some -users may wish to combine steps (d) and (f) by using a pipe. - --------------------------------------------------------------------------- - Paul Gortmaker 12/95 - -Changelog: ----------- - -10-22-04 : Updated to reflect changes in command line options, remove - obsolete references, general cleanup. - James Nelson (james4765@gmail.com) - - -12-95 : Original Document diff --git a/Documentation/riscom8.txt b/Documentation/riscom8.txt deleted file mode 100644 index 14f61fdad7ca..000000000000 --- a/Documentation/riscom8.txt +++ /dev/null @@ -1,36 +0,0 @@ -* NOTE - this is an unmaintained driver. The original author cannot be located. - -SDL Communications is now SBS Technologies, and does not have any -information on these ancient ISA cards on their website. - -James Nelson - 12-12-2004 - - This is the README for RISCom/8 multi-port serial driver - (C) 1994-1996 D.Gorodchanin - See file LICENSE for terms and conditions. - -NOTE: English is not my native language. - I'm sorry for any mistakes in this text. - -Misc. notes for RISCom/8 serial driver, in no particular order :) - -1) This driver can support up to 4 boards at time. - Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for - setting I/O base addresses for boards. If you compile driver - as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..." - -2) The driver partially supports famous 'setserial' program, you can use almost - any of its options, excluding port & irq settings. - -3) There are some misc. defines at the beginning of riscom8.c, please read the - comments and try to change some of them in case of problems. - -4) I consider the current state of the driver as BETA. - -5) SDL Communications WWW page is http://www.sdlcomm.com. - -6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries. - -7) Minor numbers for first board are 0-7, for second 8-15, etc. - -22 Apr 1996. diff --git a/Documentation/rocket.txt b/Documentation/rocket.txt deleted file mode 100644 index 1d8582990435..000000000000 --- a/Documentation/rocket.txt +++ /dev/null @@ -1,189 +0,0 @@ -Comtrol(tm) RocketPort(R)/RocketModem(TM) Series -Device Driver for the Linux Operating System - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -PRODUCT OVERVIEW ----------------- - -This driver provides a loadable kernel driver for the Comtrol RocketPort -and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32 -high-speed serial ports or modems. This driver supports up to a combination -of four RocketPort or RocketModems boards in one machine simultaneously. -This file assumes that you are using the RocketPort driver which is -integrated into the kernel sources. - -The driver can also be installed as an external module using the usual -"make;make install" routine. This external module driver, obtainable -from the Comtrol website listed below, is useful for updating the driver -or installing it into kernels which do not have the driver configured -into them. Installations instructions for the external module -are in the included README and HW_INSTALL files. - -RocketPort ISA and RocketModem II PCI boards currently are only supported by -this driver in module form. - -The RocketPort ISA board requires I/O ports to be configured by the DIP -switches on the board. See the section "ISA Rocketport Boards" below for -information on how to set the DIP switches. - -You pass the I/O port to the driver using the following module parameters: - -board1 : I/O port for the first ISA board -board2 : I/O port for the second ISA board -board3 : I/O port for the third ISA board -board4 : I/O port for the fourth ISA board - -There is a set of utilities and scripts provided with the external driver -( downloadable from http://www.comtrol.com ) that ease the configuration and -setup of the ISA cards. - -The RocketModem II PCI boards require firmware to be loaded into the card -before it will function. The driver has only been tested as a module for this -board. - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -INSTALLATION PROCEDURES ------------------------ - -RocketPort/RocketModem PCI cards require no driver configuration, they are -automatically detected and configured. - -The RocketPort driver can be installed as a module (recommended) or built -into the kernel. This is selected, as for other drivers, through the `make config` -command from the root of the Linux source tree during the kernel build process. - -The RocketPort/RocketModem serial ports installed by this driver are assigned -device major number 46, and will be named /dev/ttyRx, where x is the port number -starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards -installed in the system, the mapping of port names to serial ports is displayed -in the system log at /var/log/messages. - -If installed as a module, the module must be loaded. This can be done -manually by entering "modprobe rocket". To have the module loaded automatically -upon system boot, edit the /etc/modprobe.conf file and add the line -"alias char-major-46 rocket". - -In order to use the ports, their device names (nodes) must be created with mknod. -This is only required once, the system will retain the names once created. To -create the RocketPort/RocketModem device names, use the command -"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero. For example: - ->mknod /dev/ttyR0 c 46 0 ->mknod /dev/ttyR1 c 46 1 ->mknod /dev/ttyR2 c 46 2 - -The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes) -for you: - ->/dev/MAKEDEV ttyR - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -ISA Rocketport Boards ---------------------- - -You must assign and configure the I/O addresses used by the ISA Rocketport -card before installing and using it. This is done by setting a set of DIP -switches on the Rocketport board. - - -SETTING THE I/O ADDRESS ------------------------ - -Before installing RocketPort(R) or RocketPort RA boards, you must find -a range of I/O addresses for it to use. The first RocketPort card -requires a 68-byte contiguous block of I/O addresses, starting at one -of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, -0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP -switches of *all* of the Rocketport cards. - -The second, third, and fourth RocketPort cards require a 64-byte -contiguous block of I/O addresses, starting at one of the following -I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h, -0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the -second, third, and fourth Rocketport cards (if present) are set via -software control. The DIP switch settings for the I/O address must be -set to the value of the first Rocketport cards. - -In order to distinguish each of the card from the others, each card -must have a unique board ID set on the dip switches. The first -Rocketport board must be set with the DIP switches corresponding to -the first board, the second board must be set with the DIP switches -corresponding to the second board, etc. IMPORTANT: The board ID is -the only place where the DIP switch settings should differ between the -various Rocketport boards in a system. - -The I/O address range used by any of the RocketPort cards must not -conflict with any other cards in the system, including other -RocketPort cards. Below, you will find a list of commonly used I/O -address ranges which may be in use by other devices in your system. -On a Linux system, "cat /proc/ioports" will also be helpful in -identifying what I/O addresses are being used by devices on your -system. - -Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it -for 0x100, it will occupy 0x100 to 0x143. This would mean that you -CAN NOT set the second, third or fourth board for address 0x140 since -the first 4 bytes of that range are used by the first board. You would -need to set the second, third, or fourth board to one of the next available -blocks such as 0x180. - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -RocketPort and RocketPort RA SW1 Settings: - - +-------------------------------+ - | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | - +-------+-------+---------------+ - | Unused| Card | I/O Port Block| - +-------------------------------+ - -DIP Switches DIP Switches -7 8 6 5 -=================== =================== -On On UNUSED, MUST BE ON. On On First Card <==== Default - On Off Second Card - Off On Third Card - Off Off Fourth Card - -DIP Switches I/O Address Range -4 3 2 1 Used by the First Card -===================================== -On Off On Off 100-143 -On Off Off On 140-183 -On Off Off Off 180-1C3 <==== Default -Off On On Off 200-243 -Off On Off On 240-283 -Off On Off Off 280-2C3 -Off Off On Off 300-343 -Off Off Off On 340-383 -Off Off Off Off 380-3C3 - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -REPORTING BUGS --------------- - -For technical support, please provide the following -information: Driver version, kernel release, distribution of -kernel, and type of board you are using. Error messages and log -printouts port configuration details are especially helpful. - -USA - Phone: (612) 494-4100 - FAX: (612) 494-4199 - email: support@comtrol.com - -Comtrol Europe - Phone: +44 (0) 1 869 323-220 - FAX: +44 (0) 1 869 323-211 - email: support@comtrol.co.uk - -Web: http://www.comtrol.com -FTP: ftp.comtrol.com - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX new file mode 100644 index 000000000000..07dcdb0d2a36 --- /dev/null +++ b/Documentation/serial/00-INDEX @@ -0,0 +1,24 @@ +00-INDEX + - this file. +README.cycladesZ + - info on Cyclades-Z firmware loading. +computone.txt + - info on Computone Intelliport II/Plus Multiport Serial Driver. +digiepca.txt + - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. +hayes-esp.txt + - info on using the Hayes ESP serial driver. +moxa-smartio + - file with info on installing/using Moxa multiport serial driver. +riscom8.txt + - notes on using the RISCom/8 multi-port serial driver. +rocket.txt + - info on the Comtrol RocketPort multiport serial driver. +specialix.txt + - info on hardware/driver for specialix IO8+ multiport serial card. +stallion.txt + - info on using the Stallion multiport serial driver. +sx.txt + - info on the Specialix SX/SI multiport serial driver. +tty.txt + - guide to the locking policies of the tty layer. diff --git a/Documentation/serial/README.cycladesZ b/Documentation/serial/README.cycladesZ new file mode 100644 index 000000000000..024a69443cc2 --- /dev/null +++ b/Documentation/serial/README.cycladesZ @@ -0,0 +1,8 @@ + +The Cyclades-Z must have firmware loaded onto the card before it will +operate. This operation should be performed during system startup, + +The firmware, loader program and the latest device driver code are +available from Cyclades at + ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ + diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt new file mode 100644 index 000000000000..c57ea4781e5d --- /dev/null +++ b/Documentation/serial/computone.txt @@ -0,0 +1,522 @@ +NOTE: This is an unmaintained driver. It is not guaranteed to work due to +changes made in the tty layer in 2.6. If you wish to take over maintenance of +this driver, contact Michael Warfield . + +Changelog: +---------- +11-01-2001: Original Document + +10-29-2004: Minor misspelling & format fix, update status of driver. + James Nelson + +Computone Intelliport II/Plus Multiport Serial Driver +----------------------------------------------------- + +Release Notes For Linux Kernel 2.2 and higher. +These notes are for the drivers which have already been integrated into the +kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4. + +Version: 1.2.14 +Date: 11/01/2001 +Historical Author: Andrew Manison +Primary Author: Doug McNash +Support: support@computone.com +Fixes and Updates: Mike Warfield + +This file assumes that you are using the Computone drivers which are +integrated into the kernel sources. For updating the drivers or installing +drivers into kernels which do not already have Computone drivers, please +refer to the instructions in the README.computone file in the driver patch. + + +1. INTRODUCTION + +This driver supports the entire family of Intelliport II/Plus controllers +with the exception of the MicroChannel controllers. It does not support +products previous to the Intelliport II. + +This driver was developed on the v2.0.x Linux tree and has been tested up +to v2.4.14; it will probably not work with earlier v1.X kernels,. + + +2. QUICK INSTALLATION + +Hardware - If you have an ISA card, find a free interrupt and io port. + List those in use with `cat /proc/interrupts` and + `cat /proc/ioports`. Set the card dip switches to a free + address. You may need to configure your BIOS to reserve an + irq for an ISA card. PCI and EISA parameters are set + automagically. Insert card into computer with the power off + before or after drivers installation. + + Note the hardware address from the Computone ISA cards installed into + the system. These are required for editing ip2.c or editing + /etc/modprobe.conf, or for specification on the modprobe + command line. + + Note that the /etc/modules.conf should be used for older (pre-2.6) + kernels. + +Software - + +Module installation: + +a) Determine free irq/address to use if any (configure BIOS if need be) +b) Run "make config" or "make menuconfig" or "make xconfig" + Select (m) module for CONFIG_COMPUTONE under character + devices. CONFIG_PCI and CONFIG_MODULES also may need to be set. +c) Set address on ISA cards then: + edit /usr/src/linux/drivers/char/ip2.c if needed + or + edit /etc/modprobe.conf if needed (module). + or both to match this setting. +d) Run "make modules" +e) Run "make modules_install" +f) Run "/sbin/depmod -a" +g) install driver using `modprobe ip2 ` (options listed below) +h) run ip2mkdev (either the script below or the binary version) + + +Kernel installation: + +a) Determine free irq/address to use if any (configure BIOS if need be) +b) Run "make config" or "make menuconfig" or "make xconfig" + Select (y) kernel for CONFIG_COMPUTONE under character + devices. CONFIG_PCI may need to be set if you have PCI bus. +c) Set address on ISA cards then: + edit /usr/src/linux/drivers/char/ip2.c + (Optional - may be specified on kernel command line now) +d) Run "make zImage" or whatever target you prefer. +e) mv /usr/src/linux/arch/i386/boot/zImage to /boot. +f) Add new config for this kernel into /etc/lilo.conf, run "lilo" + or copy to a floppy disk and boot from that floppy disk. +g) Reboot using this kernel +h) run ip2mkdev (either the script below or the binary version) + +Kernel command line options: + +When compiling the driver into the kernel, io and irq may be +compiled into the driver by editing ip2.c and setting the values for +io and irq in the appropriate array. An alternative is to specify +a command line parameter to the kernel at boot up. + + ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 + +Note that this order is very different from the specifications for the +modload parameters which have separate IRQ and IO specifiers. + +The io port also selects PCI (1) and EISA (2) boards. + + io=0 No board + io=1 PCI board + io=2 EISA board + else ISA board io address + +You only need to specify the boards which are present. + + Examples: + + 2 PCI boards: + + ip2=1,0,1,0 + + 1 ISA board at 0x310 irq 5: + + ip2=0x310,5 + +This can be added to and "append" option in lilo.conf similar to this: + + append="ip2=1,0,1,0" + + +3. INSTALLATION + +Previously, the driver sources were packaged with a set of patch files +to update the character drivers' makefile and configuration file, and other +kernel source files. A build script (ip2build) was included which applies +the patches if needed, and build any utilities needed. +What you receive may be a single patch file in conventional kernel +patch format build script. That form can also be applied by +running patch -p1 < ThePatchFile. Otherwise run ip2build. + +The driver can be installed as a module (recommended) or built into the +kernel. This is selected as for other drivers through the `make config` +command from the root of the Linux source tree. If the driver is built +into the kernel you will need to edit the file ip2.c to match the boards +you are installing. See that file for instructions. If the driver is +installed as a module the configuration can also be specified on the +modprobe command line as follows: + + modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4 + +where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11, +12,15) and addr1-4 are the base addresses for up to four controllers. If +the irqs are not specified the driver uses the default in ip2.c (which +selects polled mode). If no base addresses are specified the defaults in +ip2.c are used. If you are autoloading the driver module with kerneld or +kmod the base addresses and interrupt number must also be set in ip2.c +and recompile or just insert and options line in /etc/modprobe.conf or both. +The options line is equivalent to the command line and takes precedence over +what is in ip2.c. + +/etc/modprobe.conf sample: + options ip2 io=1,0x328 irq=1,10 + alias char-major-71 ip2 + alias char-major-72 ip2 + alias char-major-73 ip2 + +The equivalent in ip2.c: + +static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 }; +static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; + +The equivalent for the kernel command line (in lilo.conf): + + append="ip2=1,1,0x328,10" + + +Note: Both io and irq should be updated to reflect YOUR system. An "io" + address of 1 or 2 indicates a PCI or EISA card in the board table. + The PCI or EISA irq will be assigned automatically. + +Specifying an invalid or in-use irq will default the driver into +running in polled mode for that card. If all irq entries are 0 then +all cards will operate in polled mode. + +If you select the driver as part of the kernel run : + + make zlilo (or whatever you do to create a bootable kernel) + +If you selected a module run : + + make modules && make modules_install + +The utility ip2mkdev (see 5 and 7 below) creates all the device nodes +required by the driver. For a device to be created it must be configured +in the driver and the board must be installed. Only devices corresponding +to real IntelliPort II ports are created. With multiple boards and expansion +boxes this will leave gaps in the sequence of device names. ip2mkdev uses +Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and +cuf0 - cuf255 for callout devices. + + +4. USING THE DRIVERS + +As noted above, the driver implements the ports in accordance with Linux +conventions, and the devices should be interchangeable with the standard +serial devices. (This is a key point for problem reporting: please make +sure that what you are trying do works on the ttySx/cuax ports first; then +tell us what went wrong with the ip2 ports!) + +Higher speeds can be obtained using the setserial utility which remaps +38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. +Intelliport II installations using the PowerPort expansion module can +use the custom speed setting to select the highest speeds: 153,600 bps, +230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for +custom baud rate configuration is fixed at 921,600 for cards/expansion +modules with ST654's and 115200 for those with Cirrus CD1400's. This +corresponds to the maximum bit rates those chips are capable. +For example if the baud base is 921600 and the baud divisor is 18 then +the custom rate is 921600/18 = 51200 bps. See the setserial man page for +complete details. Of course if stty accepts the higher rates now you can +use that as well as the standard ioctls(). + + +5. ip2mkdev and assorted utilities... + +Several utilities, including the source for a binary ip2mkdev utility are +available under .../drivers/char/ip2. These can be build by changing to +that directory and typing "make" after the kernel has be built. If you do +not wish to compile the binary utilities, the shell script below can be +cut out and run as "ip2mkdev" to create the necessary device files. To +use the ip2mkdev script, you must have procfs enabled and the proc file +system mounted on /proc. + + +6. NOTES + +This is a release version of the driver, but it is impossible to test it +in all configurations of Linux. If there is any anomalous behaviour that +does not match the standard serial port's behaviour please let us know. + + +7. ip2mkdev shell script + +Previously, this script was simply attached here. It is now attached as a +shar archive to make it easier to extract the script from the documentation. +To create the ip2mkdev shell script change to a convenient directory (/tmp +works just fine) and run the following command: + + unshar Documentation/serial/computone.txt + (This file) + +You should now have a file ip2mkdev in your current working directory with +permissions set to execute. Running that script with then create the +necessary devices for the Computone boards, interfaces, and ports which +are present on you system at the time it is run. + + +#!/bin/sh +# This is a shell archive (produced by GNU sharutils 4.2.1). +# To extract the files from this archive, save it to some FILE, remove +# everything before the `!/bin/sh' line above, then type `sh FILE'. +# +# Made on 2001-10-29 10:32 EST by . +# Source directory was `/home2/src/tmp'. +# +# Existing files will *not* be overwritten unless `-c' is specified. +# +# This shar contains: +# length mode name +# ------ ---------- ------------------------------------------ +# 4251 -rwxr-xr-x ip2mkdev +# +save_IFS="${IFS}" +IFS="${IFS}:" +gettext_dir=FAILED +locale_dir=FAILED +first_param="$1" +for dir in $PATH +do + if test "$gettext_dir" = FAILED && test -f $dir/gettext \ + && ($dir/gettext --version >/dev/null 2>&1) + then + set `$dir/gettext --version 2>&1` + if test "$3" = GNU + then + gettext_dir=$dir + fi + fi + if test "$locale_dir" = FAILED && test -f $dir/shar \ + && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) + then + locale_dir=`$dir/shar --print-text-domain-dir` + fi +done +IFS="$save_IFS" +if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED +then + echo=echo +else + TEXTDOMAINDIR=$locale_dir + export TEXTDOMAINDIR + TEXTDOMAIN=sharutils + export TEXTDOMAIN + echo="$gettext_dir/gettext -s" +fi +if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then + shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"' +elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then + shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"' +elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then + shar_touch='touch -am $3$4$5$6$2 "$8"' +else + shar_touch=: + echo + $echo 'WARNING: not restoring timestamps. Consider getting and' + $echo "installing GNU \`touch', distributed in GNU File Utilities..." + echo +fi +rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch +# +if mkdir _sh17581; then + $echo 'x -' 'creating lock directory' +else + $echo 'failed to create lock directory' + exit 1 +fi +# ============= ip2mkdev ============== +if test -f 'ip2mkdev' && test "$first_param" != -c; then + $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)' +else + $echo 'x -' extracting 'ip2mkdev' '(text)' + sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' && +#!/bin/sh - +# +# ip2mkdev +# +# Make or remove devices as needed for Computone Intelliport drivers +# +# First rule! If the dev file exists and you need it, don't mess +# with it. That prevents us from screwing up open ttys, ownership +# and permissions on a running system! +# +# This script will NOT remove devices that no longer exist if their +# board or interface box has been removed. If you want to get rid +# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*" +# before running this script. Running this script will then recreate +# all the valid devices. +# +# Michael H. Warfield +# /\/\|=mhw=|\/\/ +# mhw@wittsend.com +# +# Updated 10/29/2000 for version 1.2.13 naming convention +# under devfs. /\/\|=mhw=|\/\/ +# +# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/ +# +X +if test -d /dev/ip2 ; then +# This is devfs mode... We don't do anything except create symlinks +# from the real devices to the old names! +X cd /dev +X echo "Creating symbolic links to devfs devices" +X for i in `ls ip2` ; do +X if test ! -L ip2$i ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f ip2$i +X ln -s ip2/$i ip2$i +X fi +X done +X for i in `( cd tts ; ls F* )` ; do +X if test ! -L tty$i ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f tty$i +X ln -s tts/$i tty$i +X fi +X done +X for i in `( cd cua ; ls F* )` ; do +X DEVNUMBER=`expr $i : 'F\(.*\)'` +X if test ! -L cuf$DEVNUMBER ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f cuf$DEVNUMBER +X ln -s cua/$i cuf$DEVNUMBER +X fi +X done +X exit 0 +fi +X +if test ! -f /proc/tty/drivers +then +X echo "\ +Unable to check driver status. +Make sure proc file system is mounted." +X +X exit 255 +fi +X +if test ! -f /proc/tty/driver/ip2 +then +X echo "\ +Unable to locate ip2 proc file. +Attempting to load driver" +X +X if /sbin/insmod ip2 +X then +X if test ! -f /proc/tty/driver/ip2 +X then +X echo "\ +Unable to locate ip2 proc file after loading driver. +Driver initialization failure or driver version error. +" +X exit 255 +X fi +X else +X echo "Unable to load ip2 driver." +X exit 255 +X fi +fi +X +# Ok... So we got the driver loaded and we can locate the procfs files. +# Next we need our major numbers. +X +TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` +CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` +BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2` +X +echo "\ +TTYMAJOR = $TTYMAJOR +CUAMAJOR = $CUAMAJOR +BRDMAJOR = $BRDMAJOR +" +X +# Ok... Now we should know our major numbers, if appropriate... +# Now we need our boards and start the device loops. +X +grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest +do +X # The test for blank "type" will catch the stats lead-in lines +X # if they exist in the file +X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = "" +X then +X continue +X fi +X +X BOARDNO=`expr "$number" : '\([0-9]\):'` +X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '` +X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '` +X +X if test "$BOARDNO" = "" -o "$PORTS" = "" +X then +# This may be a bug. We should at least get this much information +X echo "Unable to process board line" +X continue +X fi +X +X if test "$MINORS" = "" +X then +# Silently skip this one. This board seems to have no boxes +X continue +X fi +X +X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS" +X +X if test "$BRDMAJOR" != "" +X then +X BRDMINOR=`expr $BOARDNO \* 4` +X STSMINOR=`expr $BRDMINOR + 1` +X if test ! -c /dev/ip2ipl$BOARDNO ; then +X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR +X fi +X if test ! -c /dev/ip2stat$BOARDNO ; then +X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR +X fi +X fi +X +X if test "$TTYMAJOR" != "" +X then +X PORTNO=$BOARDBASE +X +X for PORTNO in $MINORS +X do +X if test ! -c /dev/ttyF$PORTNO ; then +X # We got the hardware but no device - make it +X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO +X fi +X done +X fi +X +X if test "$CUAMAJOR" != "" +X then +X PORTNO=$BOARDBASE +X +X for PORTNO in $MINORS +X do +X if test ! -c /dev/cuf$PORTNO ; then +X # We got the hardware but no device - make it +X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO +X fi +X done +X fi +done +X +Xexit 0 +SHAR_EOF + (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") && + chmod 0755 'ip2mkdev' || + $echo 'restore of' 'ip2mkdev' 'failed' + if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ + && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then + md5sum -c << SHAR_EOF >/dev/null 2>&1 \ + || $echo 'ip2mkdev:' 'MD5 check failed' +cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev +SHAR_EOF + else + shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`" + test 4251 -eq "$shar_count" || + $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!" + fi +fi +rm -fr _sh17581 +exit 0 diff --git a/Documentation/serial/digiepca.txt b/Documentation/serial/digiepca.txt new file mode 100644 index 000000000000..f2560e22f2c9 --- /dev/null +++ b/Documentation/serial/digiepca.txt @@ -0,0 +1,98 @@ +NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at +http://www.digi.com for PCI cards. They no longer maintain this driver, +and have no 2.6 driver for ISA cards. + +This driver requires a number of user-space tools. They can be acquired from +http://www.digi.com, but only works with 2.4 kernels. + + +The Digi Intl. epca driver. +---------------------------- +The Digi Intl. epca driver for Linux supports the following boards: + +Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve +Digi EISA/Xem, PCI/Xem, PCI/Xr + +Limitations: +------------ +Currently the driver only autoprobes for supported PCI boards. + +The Linux MAKEDEV command does not support generating the Digiboard +Devices. Users executing digiConfig to setup EISA and PC series cards +will have their device nodes automatically constructed (cud?? for ~CLOCAL, +and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO +prompt, or those users booting PCI cards may use buildDIGI to construct +the necessary nodes. + +Notes: +------ +This driver may be configured via LILO. For users who have already configured +their driver using digiConfig, configuring from LILO will override previous +settings. Multiple boards may be configured by issuing multiple LILO command +lines. For examples see the bottom of this document. + +Device names start at 0 and continue up. Beware of this as previous Digi +drivers started device names with 1. + +PCI boards are auto-detected and configured by the driver. PCI boards will +be allocated device numbers (internally) beginning with the lowest PCI slot +first. In other words a PCI card in slot 3 will always have higher device +nodes than a PCI card in slot 1. + +LILO config examples: +--------------------- +Using LILO's APPEND command, a string of comma separated identifiers or +integers can be used to configure supported boards. The six values in order +are: + + Enable/Disable this card or Override, + Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), + EISA/Xem (3), PC/64Xe (4), PC/Xi (5), + Enable/Disable alternate pin arrangement, + Number of ports on this card, + I/O Port where card is configured (in HEX if using string identifiers), + Base of memory window (in HEX if using string identifiers), + +NOTE : PCI boards are auto-detected and configured. Do not attempt to +configure PCI boards with the LILO append command. If you wish to override +previous configuration data (As set by digiConfig), but you do not wish to +configure any specific card (Example if there are PCI cards in the system) +the following override command will accomplish this: +-> append="digi=2" + +Samples: + append="digiepca=E,PC/Xe,D,16,200,D0000" + or + append="digi=1,0,0,16,512,851968" + +Supporting Tools: +----------------- +Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See +drivers/char/README.epca for more details. Note, +this driver REQUIRES that digiDload be executed prior to it being used. +Failure to do this will result in an ENODEV error. + +Documentation: +-------------- +Complete documentation for this product may be found in the tool package. + +Sources of information and support: +----------------------------------- +Digi Intl. support site for this product: + +-> http://www.digi.com + +Acknowledgments: +---------------- +Much of this work (And even text) was derived from a similar document +supporting the original public domain DigiBoard driver Copyright (C) +1994,1995 Troy De Jongh. Many thanks to Christoph Lameter +(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored +and contributed to the original document. + +Changelog: +---------- +10-29-04: Update status of driver, remove dead links in document + James Nelson + +2000 (?) Original Document diff --git a/Documentation/serial/hayes-esp.txt b/Documentation/serial/hayes-esp.txt new file mode 100644 index 000000000000..09b5d5856758 --- /dev/null +++ b/Documentation/serial/hayes-esp.txt @@ -0,0 +1,154 @@ +HAYES ESP DRIVER VERSION 2.1 + +A big thanks to the people at Hayes, especially Alan Adamson. Their support +has enabled me to provide enhancements to the driver. + +Please report your experiences with this driver to me (arobinso@nyx.net). I +am looking for both positive and negative feedback. + +*** IMPORTANT CHANGES FOR 2.1 *** +Support for PIO mode. Five situations will cause PIO mode to be used: +1) A multiport card is detected. PIO mode will always be used. (8 port cards +do not support DMA). +2) The DMA channel is set to an invalid value (anything other than 1 or 3). +3) The DMA buffer/channel could not be allocated. The port will revert to PIO +mode until it is reopened. +4) Less than a specified number of bytes need to be transferred to/from the +FIFOs. PIO mode will be used for that transfer only. +5) A port needs to do a DMA transfer and another port is already using the +DMA channel. PIO mode will be used for that transfer only. + +Since the Hayes ESP seems to conflict with other cards (notably sound cards) +when using DMA, DMA is turned off by default. To use DMA, it must be turned +on explicitly, either with the "dma=" option described below or with +setserial. A multiport card can be forced into DMA mode by using setserial; +however, most multiport cards don't support DMA. + +The latest version of setserial allows the enhanced configuration of the ESP +card to be viewed and modified. +*** + +This package contains the files needed to compile a module to support the Hayes +ESP card. The drivers are basically a modified version of the serial drivers. + +Features: + +- Uses the enhanced mode of the ESP card, allowing a wider range of + interrupts and features than compatibility mode +- Uses DMA and 16 bit PIO mode to transfer data to and from the ESP's FIFOs, + reducing CPU load +- Supports primary and secondary ports + + +If the driver is compiled as a module, the IRQs to use can be specified by +using the irq= option. The format is: + +irq=[0x100],[0x140],[0x180],[0x200],[0x240],[0x280],[0x300],[0x380] + +The address in brackets is the base address of the card. The IRQ of +nonexistent cards can be set to 0. If an IRQ of a card that does exist is set +to 0, the driver will attempt to guess at the correct IRQ. For example, to set +the IRQ of the card at address 0x300 to 12, the insmod command would be: + +insmod esp irq=0,0,0,0,0,0,12,0 + +The custom divisor can be set by using the divisor= option. The format is the +same as for the irq= option. Each divisor value is a series of hex digits, +with each digit representing the divisor to use for a corresponding port. The +divisor value is constructed RIGHT TO LEFT. Specifying a nonzero divisor value +will automatically set the spd_cust flag. To calculate the divisor to use for +a certain baud rate, divide the port's base baud (generally 921600) by the +desired rate. For example, to set the divisor of the primary port at 0x300 to +4 and the divisor of the secondary port at 0x308 to 8, the insmod command would +be: + +insmod esp divisor=0,0,0,0,0,0,0x84,0 + +The dma= option can be used to set the DMA channel. The channel can be either +1 or 3. Specifying any other value will force the driver to use PIO mode. +For example, to set the DMA channel to 3, the insmod command would be: + +insmod esp dma=3 + +The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger +levels. They specify when the ESP card should send an interrupt. Larger +values will decrease the number of interrupts; however, a value too high may +result in data loss. Valid values are 1 through 1023, with 768 being the +default. For example, to set the receive trigger level to 512 bytes and the +transmit trigger level to 700 bytes, the insmod command would be: + +insmod esp rx_trigger=512 tx_trigger=700 + +The flow_off= and flow_on= options can be used to set the hardware flow off/ +flow on levels. The flow on level must be lower than the flow off level, and +the flow off level should be higher than rx_trigger. Valid values are 1 +through 1023, with 1016 being the default flow off level and 944 being the +default flow on level. For example, to set the flow off level to 1000 bytes +and the flow on level to 935 bytes, the insmod command would be: + +insmod esp flow_off=1000 flow_on=935 + +The rx_timeout= option can be used to set the receive timeout value. This +value indicates how long after receiving the last character that the ESP card +should wait before signalling an interrupt. Valid values are 0 though 255, +with 128 being the default. A value too high will increase latency, and a +value too low will cause unnecessary interrupts. For example, to set the +receive timeout to 255, the insmod command would be: + +insmod esp rx_timeout=255 + +The pio_threshold= option sets the threshold (in number of characters) for +using PIO mode instead of DMA mode. For example, if this value is 32, +transfers of 32 bytes or less will always use PIO mode. + +insmod esp pio_threshold=32 + +Multiple options can be listed on the insmod command line by separating each +option with a space. For example: + +insmod esp dma=3 trigger=512 + +The esp module can be automatically loaded when needed. To cause this to +happen, add the following lines to /etc/modprobe.conf (replacing the last line +with options for your configuration): + +alias char-major-57 esp +alias char-major-58 esp +options esp irq=0,0,0,0,0,0,3,0 divisor=0,0,0,0,0,0,0x4,0 + +You may also need to run 'depmod -a'. + +Devices must be created manually. To create the devices, note the output from +the module after it is inserted. The output will appear in the location where +kernel messages usually appear (usually /var/adm/messages). Create two devices +for each 'tty' mentioned, one with major of 57 and the other with major of 58. +The minor number should be the same as the tty number reported. The commands +would be (replace ? with the tty number): + +mknod /dev/ttyP? c 57 ? +mknod /dev/cup? c 58 ? + +For example, if the following line appears: + +Oct 24 18:17:23 techno kernel: ttyP8 at 0x0140 (irq = 3) is an ESP primary port + +...two devices should be created: + +mknod /dev/ttyP8 c 57 8 +mknod /dev/cup8 c 58 8 + +You may need to set the permissions on the devices: + +chmod 666 /dev/ttyP* +chmod 666 /dev/cup* + +The ESP module and the serial module should not conflict (they can be used at +the same time). After the ESP module has been loaded the ports on the ESP card +will no longer be accessible by the serial driver. + +If I/O errors are experienced when accessing the port, check for IRQ and DMA +conflicts ('cat /proc/interrupts' and 'cat /proc/dma' for a list of IRQs and +DMAs currently in use). + +Enjoy! +Andrew J. Robinson diff --git a/Documentation/serial/moxa-smartio b/Documentation/serial/moxa-smartio new file mode 100644 index 000000000000..5337e80a5b96 --- /dev/null +++ b/Documentation/serial/moxa-smartio @@ -0,0 +1,523 @@ +============================================================================= + MOXA Smartio/Industio Family Device Driver Installation Guide + for Linux Kernel 2.4.x, 2.6.x + Copyright (C) 2008, Moxa Inc. +============================================================================= +Date: 01/21/2008 + +Content + +1. Introduction +2. System Requirement +3. Installation + 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation +4. Utilities +5. Setserial +6. Troubleshooting + +----------------------------------------------------------------------------- +1. Introduction + + The Smartio/Industio/UPCI family Linux driver supports following multiport + boards. + + - 2 ports multiport board + CP-102U, CP-102UL, CP-102UF + CP-132U-I, CP-132UL, + CP-132, CP-132I, CP132S, CP-132IS, + CI-132, CI-132I, CI-132IS, + (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) + + - 4 ports multiport board + CP-104EL, + CP-104UL, CP-104JU, + CP-134U, CP-134U-I, + C104H/PCI, C104HS/PCI, + CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, + C104H, C104HS, + CI-104J, CI-104JS, + CI-134, CI-134I, CI-134IS, + (C114HI, CT-114I, C104P) + POS-104UL, + CB-114, + CB-134I + + - 8 ports multiport board + CP-118EL, CP-168EL, + CP-118U, CP-168U, + C168H/PCI, + C168H, C168HS, + (C168P), + CB-108 + + This driver and installation procedure have been developed upon Linux Kernel + 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order + to maintain compatibility, this version has also been properly tested with + RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem + occurs, please contact Moxa at support@moxa.com.tw. + + In addition to device driver, useful utilities are also provided in this + version. They are + - msdiag Diagnostic program for displaying installed Moxa + Smartio/Industio boards. + - msmon Monitor program to observe data count and line status signals. + - msterm A simple terminal program which is useful in testing serial + ports. + - io-irq.exe Configuration program to setup ISA boards. Please note that + this program can only be executed under DOS. + + All the drivers and utilities are published in form of source code under + GNU General Public License in this version. Please refer to GNU General + Public License announcement in each source code file for more detail. + + In Moxa's Web sites, you may always find latest driver at http://web.moxa.com. + + This version of driver can be installed as Loadable Module (Module driver) + or built-in into kernel (Static driver). You may refer to following + installation procedure for suitable one. Before you install the driver, + please refer to hardware installation procedure in the User's Manual. + + We assume the user should be familiar with following documents. + - Serial-HOWTO + - Kernel-HOWTO + +----------------------------------------------------------------------------- +2. System Requirement + - Hardware platform: Intel x86 machine + - Kernel version: 2.4.x or 2.6.x + - gcc version 2.72 or later + - Maximum 4 boards can be installed in combination + +----------------------------------------------------------------------------- +3. Installation + + 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation + + + 3.1 Hardware installation + + There are two types of buses, ISA and PCI, for Smartio/Industio + family multiport board. + + ISA board + --------- + You'll have to configure CAP address, I/O address, Interrupt Vector + as well as IRQ before installing this driver. Please refer to hardware + installation procedure in User's Manual before proceed any further. + Please make sure the JP1 is open after the ISA board is set properly. + + PCI/UPCI board + -------------- + You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict + with other ISA devices. Please refer to hardware installation + procedure in User's Manual in advance. + + PCI IRQ Sharing + ----------- + Each port within the same multiport board shares the same IRQ. Up to + 4 Moxa Smartio/Industio PCI Family multiport boards can be installed + together on one system and they can share the same IRQ. + + + 3.2 Driver files + + The driver file may be obtained from ftp, CD-ROM or floppy disk. The + first step, anyway, is to copy driver file "mxser.tgz" into specified + directory. e.g. /moxa. The execute commands as below. + + # cd / + # mkdir moxa + # cd /moxa + # tar xvf /dev/fd0 + + or + + # cd / + # mkdir moxa + # cd /moxa + # cp /mnt/cdrom//mxser.tgz . + # tar xvfz mxser.tgz + + + 3.3 Device naming convention + + You may find all the driver and utilities files in /moxa/mxser. + Following installation procedure depends on the model you'd like to + run the driver. If you prefer module driver, please refer to 3.4. + If static driver is required, please refer to 3.5. + + Dialin and callout port + ----------------------- + This driver remains traditional serial device properties. There are + two special file name for each serial port. One is dial-in port + which is named "ttyMxx". For callout port, the naming convention + is "cumxx". + + Device naming when more than 2 boards installed + ----------------------------------------------- + Naming convention for each Smartio/Industio multiport board is + pre-defined as below. + + Board Num. Dial-in Port Callout port + 1st board ttyM0 - ttyM7 cum0 - cum7 + 2nd board ttyM8 - ttyM15 cum8 - cum15 + 3rd board ttyM16 - ttyM23 cum16 - cum23 + 4th board ttyM24 - ttym31 cum24 - cum31 + + + !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + Under Kernel 2.6 the cum Device is Obsolete. So use ttyM* + device instead. + !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + + Board sequence + -------------- + This driver will activate ISA boards according to the parameter set + in the driver. After all specified ISA board activated, PCI board + will be installed in the system automatically driven. + Therefore the board number is sorted by the CAP address of ISA boards. + For PCI boards, their sequence will be after ISA boards and C168H/PCI + has higher priority than C104H/PCI boards. + + 3.4 Module driver configuration + Module driver is easiest way to install. If you prefer static driver + installation, please skip this paragraph. + + + ------------- Prepare to use the MOXA driver-------------------- + 3.4.1 Create tty device with correct major number + Before using MOXA driver, your system must have the tty devices + which are created with driver's major number. We offer one shell + script "msmknod" to simplify the procedure. + This step is only needed to be executed once. But you still + need to do this procedure when: + a. You change the driver's major number. Please refer the "3.7" + section. + b. Your total installed MOXA boards number is changed. Maybe you + add/delete one MOXA board. + c. You want to change the tty name. This needs to modify the + shell script "msmknod" + + The procedure is: + # cd /moxa/mxser/driver + # ./msmknod + + This shell script will require the major number for dial-in + device and callout device to create tty device. You also need + to specify the total installed MOXA board number. Default major + numbers for dial-in device and callout device are 30, 35. If + you need to change to other number, please refer section "3.7" + for more detailed procedure. + Msmknod will delete any special files occupying the same device + naming. + + 3.4.2 Build the MOXA driver and utilities + Before using the MOXA driver and utilities, you need compile the + all the source code. This step is only need to be executed once. + But you still re-compile the source code if you modify the source + code. For example, if you change the driver's major number (see + "3.7" section), then you need to do this step again. + + Find "Makefile" in /moxa/mxser, then run + + # make clean; make install + + !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! + For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: + # make clean; make installsp1 + + For Red Hat Enterprise Linux AS4/ES4/WS4: + # make clean; make installsp2 + !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! + + The driver files "mxser.o" and utilities will be properly compiled + and copied to system directories respectively. + + ------------- Load MOXA driver-------------------- + 3.4.3 Load the MOXA driver + + # modprobe mxser + + will activate the module driver. You may run "lsmod" to check + if "mxser" is activated. If the MOXA board is ISA board, the + is needed. Please refer to section "3.4.5" for more + information. + + + ------------- Load MOXA driver on boot -------------------- + 3.4.4 For the above description, you may manually execute + "modprobe mxser" to activate this driver and run + "rmmod mxser" to remove it. + However, it's better to have a boot time configuration to + eliminate manual operation. Boot time configuration can be + achieved by rc file. We offer one "rc.mxser" file to simplify + the procedure under "moxa/mxser/driver". + + But if you use ISA board, please modify the "modprobe ..." command + to add the argument (see "3.4.5" section). After modifying the + rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" + manually to make sure the modification is ok. If any error + encountered, please try to modify again. If the modification is + completed, follow the below step. + + Run following command for setting rc files. + + # cd /moxa/mxser/driver + # cp ./rc.mxser /etc/rc.d + # cd /etc/rc.d + + Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, + create it by vi, run "chmod 755 rc.serial" to change the permission. + Add "/etc/rc.d/rc.mxser" in last line, + + Reboot and check if moxa.o activated by "lsmod" command. + + 3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system, + you'll have to add parameter to specify CAP address of given + board while activating "mxser.o". The format for parameters are + as follows. + + modprobe mxser ioaddr=0x???,0x???,0x???,0x??? + | | | | + | | | +- 4th ISA board + | | +------ 3rd ISA board + | +------------ 2nd ISA board + +------------------- 1st ISA board + + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x + + Note: To use static driver, you must install the linux kernel + source package. + + 3.5.1 Backup the built-in driver in the kernel. + # cd /usr/src/linux/drivers/char + # mv mxser.c mxser.c.old + + For Red Hat 7.x user, you need to create link: + # cd /usr/src + # ln -s linux-2.4 linux + + 3.5.2 Create link + # cd /usr/src/linux/drivers/char + # ln -s /moxa/mxser/driver/mxser.c mxser.c + + 3.5.3 Add CAP address list for ISA boards. For PCI boards user, + please skip this step. + + In module mode, the CAP address for ISA board is given by + parameter. In static driver configuration, you'll have to + assign it within driver's source code. If you will not + install any ISA boards, you may skip to next portion. + The instructions to modify driver source code are as + below. + a. # cd /moxa/mxser/driver + # vi mxser.c + b. Find the array mxserBoardCAP[] as below. + + static int mxserBoardCAP[] + = {0x00, 0x00, 0x00, 0x00}; + + c. Change the address within this array using vi. For + example, to driver 2 ISA boards with CAP address + 0x280 and 0x180 as 1st and 2nd board. Just to change + the source code as follows. + + static int mxserBoardCAP[] + = {0x280, 0x180, 0x00, 0x00}; + + 3.5.4 Setup kernel configuration + + Configure the kernel: + + # cd /usr/src/linux + # make menuconfig + + You will go into a menu-driven system. Please select [Character + devices][Non-standard serial port support], enable the [Moxa + SmartIO support] driver with "[*]" for built-in (not "[M]"), then + select [Exit] to exit this program. + + 3.5.5 Rebuild kernel + The following are for Linux kernel rebuilding, for your + reference only. + For appropriate details, please refer to the Linux document. + + a. cd /usr/src/linux + b. make clean /* take a few minutes */ + c. make dep /* take a few minutes */ + d. make bzImage /* take probably 10-20 minutes */ + e. make install /* copy boot image to correct position */ + f. Please make sure the boot kernel (vmlinuz) is in the + correct position. + g. If you use 'lilo' utility, you should check /etc/lilo.conf + 'image' item specified the path which is the 'vmlinuz' path, + or you will load wrong (or old) boot kernel image (vmlinuz). + After checking /etc/lilo.conf, please run "lilo". + + Note that if the result of "make bzImage" is ERROR, then you have to + go back to Linux configuration Setup. Type "make menuconfig" in + directory /usr/src/linux. + + + 3.5.6 Make tty device and special file + # cd /moxa/mxser/driver + # ./msmknod + + 3.5.7 Make utility + # cd /moxa/mxser/utility + # make clean; make install + + 3.5.8 Reboot + + + + 3.6 Custom configuration + Although this driver already provides you default configuration, you + still can change the device name and major number. The instruction to + change these parameters are shown as below. + + Change Device name + ------------------ + If you'd like to use other device names instead of default naming + convention, all you have to do is to modify the internal code + within the shell script "msmknod". First, you have to open "msmknod" + by vi. Locate each line contains "ttyM" and "cum" and change them + to the device name you desired. "msmknod" creates the device names + you need next time executed. + + Change Major number + ------------------- + If major number 30 and 35 had been occupied, you may have to select + 2 free major numbers for this driver. There are 3 steps to change + major numbers. + + 3.6.1 Find free major numbers + In /proc/devices, you may find all the major numbers occupied + in the system. Please select 2 major numbers that are available. + e.g. 40, 45. + 3.6.2 Create special files + Run /moxa/mxser/driver/msmknod to create special files with + specified major numbers. + 3.6.3 Modify driver with new major number + Run vi to open /moxa/mxser/driver/mxser.c. Locate the line + contains "MXSERMAJOR". Change the content as below. + #define MXSERMAJOR 40 + #define MXSERCUMAJOR 45 + 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. + + 3.7 Verify driver installation + You may refer to /var/log/messages to check the latest status + log reported by this driver whenever it's activated. + +----------------------------------------------------------------------------- +4. Utilities + There are 3 utilities contained in this driver. They are msdiag, msmon and + msterm. These 3 utilities are released in form of source code. They should + be compiled into executable file and copied into /usr/bin. + + Before using these utilities, please load driver (refer 3.4 & 3.5) and + make sure you had run the "msmknod" utility. + + msdiag - Diagnostic + -------------------- + This utility provides the function to display what Moxa Smartio/Industio + board found by driver in the system. + + msmon - Port Monitoring + ----------------------- + This utility gives the user a quick view about all the MOXA ports' + activities. One can easily learn each port's total received/transmitted + (Rx/Tx) character count since the time when the monitoring is started. + Rx/Tx throughputs per second are also reported in interval basis (e.g. + the last 5 seconds) and in average basis (since the time the monitoring + is started). You can reset all ports' count by key. <+> <-> + (plus/minus) keys to change the displaying time interval. Press + on the port, that cursor stay, to view the port's communication + parameters, signal status, and input/output queue. + + msterm - Terminal Emulation + --------------------------- + This utility provides data sending and receiving ability of all tty ports, + especially for MOXA ports. It is quite useful for testing simple + application, for example, sending AT command to a modem connected to the + port or used as a terminal for login purpose. Note that this is only a + dumb terminal emulation without handling full screen operation. + +----------------------------------------------------------------------------- +5. Setserial + + Supported Setserial parameters are listed as below. + + uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) + close_delay set the amount of time(in 1/100 of a second) that DTR + should be kept low while being closed. + closing_wait set the amount of time(in 1/100 of a second) that the + serial port should wait for data to be drained while + being closed, before the receiver is disable. + spd_hi Use 57.6kb when the application requests 38.4kb. + spd_vhi Use 115.2kb when the application requests 38.4kb. + spd_shi Use 230.4kb when the application requests 38.4kb. + spd_warp Use 460.8kb when the application requests 38.4kb. + spd_normal Use 38.4kb when the application requests 38.4kb. + spd_cust Use the custom divisor to set the speed when the + application requests 38.4kb. + divisor This option set the custom divison. + baud_base This option set the base baud rate. + +----------------------------------------------------------------------------- +6. Troubleshooting + + The boot time error messages and solutions are stated as clearly as + possible. If all the possible solutions fail, please contact our technical + support team to get more help. + + + Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board + and after are ignored. + Solution: + To avoid this problem, please unplug fifth and after board, because Moxa + driver supports up to 4 boards. + + Error msg: Request_irq fail, IRQ(?) may be conflict with another device. + Solution: + Other PCI or ISA devices occupy the assigned IRQ. If you are not sure + which device causes the situation, please check /proc/interrupts to find + free IRQ and simply change another free IRQ for Moxa board. + + Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid. + Solution: + Each port within the same multiport board shares the same IRQ. Please set + one IRQ (IRQ doesn't equal to zero) for one Moxa board. + + Error msg: No interrupt vector be set for Moxa ISA board(CAP=xxx). + Solution: + Moxa ISA board needs an interrupt vector.Please refer to user's manual + "Hardware Installation" chapter to set interrupt vector. + + Error msg: Couldn't install MOXA Smartio/Industio family driver! + Solution: + Load Moxa driver fail, the major number may conflict with other devices. + Please refer to previous section 3.7 to change a free major number for + Moxa driver. + + Error msg: Couldn't install MOXA Smartio/Industio family callout driver! + Solution: + Load Moxa callout driver fail, the callout device major number may + conflict with other devices. Please refer to previous section 3.7 to + change a free callout device major number for Moxa driver. + + +----------------------------------------------------------------------------- + diff --git a/Documentation/serial/riscom8.txt b/Documentation/serial/riscom8.txt new file mode 100644 index 000000000000..14f61fdad7ca --- /dev/null +++ b/Documentation/serial/riscom8.txt @@ -0,0 +1,36 @@ +* NOTE - this is an unmaintained driver. The original author cannot be located. + +SDL Communications is now SBS Technologies, and does not have any +information on these ancient ISA cards on their website. + +James Nelson - 12-12-2004 + + This is the README for RISCom/8 multi-port serial driver + (C) 1994-1996 D.Gorodchanin + See file LICENSE for terms and conditions. + +NOTE: English is not my native language. + I'm sorry for any mistakes in this text. + +Misc. notes for RISCom/8 serial driver, in no particular order :) + +1) This driver can support up to 4 boards at time. + Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for + setting I/O base addresses for boards. If you compile driver + as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..." + +2) The driver partially supports famous 'setserial' program, you can use almost + any of its options, excluding port & irq settings. + +3) There are some misc. defines at the beginning of riscom8.c, please read the + comments and try to change some of them in case of problems. + +4) I consider the current state of the driver as BETA. + +5) SDL Communications WWW page is http://www.sdlcomm.com. + +6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries. + +7) Minor numbers for first board are 0-7, for second 8-15, etc. + +22 Apr 1996. diff --git a/Documentation/serial/rocket.txt b/Documentation/serial/rocket.txt new file mode 100644 index 000000000000..1d8582990435 --- /dev/null +++ b/Documentation/serial/rocket.txt @@ -0,0 +1,189 @@ +Comtrol(tm) RocketPort(R)/RocketModem(TM) Series +Device Driver for the Linux Operating System + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +PRODUCT OVERVIEW +---------------- + +This driver provides a loadable kernel driver for the Comtrol RocketPort +and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32 +high-speed serial ports or modems. This driver supports up to a combination +of four RocketPort or RocketModems boards in one machine simultaneously. +This file assumes that you are using the RocketPort driver which is +integrated into the kernel sources. + +The driver can also be installed as an external module using the usual +"make;make install" routine. This external module driver, obtainable +from the Comtrol website listed below, is useful for updating the driver +or installing it into kernels which do not have the driver configured +into them. Installations instructions for the external module +are in the included README and HW_INSTALL files. + +RocketPort ISA and RocketModem II PCI boards currently are only supported by +this driver in module form. + +The RocketPort ISA board requires I/O ports to be configured by the DIP +switches on the board. See the section "ISA Rocketport Boards" below for +information on how to set the DIP switches. + +You pass the I/O port to the driver using the following module parameters: + +board1 : I/O port for the first ISA board +board2 : I/O port for the second ISA board +board3 : I/O port for the third ISA board +board4 : I/O port for the fourth ISA board + +There is a set of utilities and scripts provided with the external driver +( downloadable from http://www.comtrol.com ) that ease the configuration and +setup of the ISA cards. + +The RocketModem II PCI boards require firmware to be loaded into the card +before it will function. The driver has only been tested as a module for this +board. + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +INSTALLATION PROCEDURES +----------------------- + +RocketPort/RocketModem PCI cards require no driver configuration, they are +automatically detected and configured. + +The RocketPort driver can be installed as a module (recommended) or built +into the kernel. This is selected, as for other drivers, through the `make config` +command from the root of the Linux source tree during the kernel build process. + +The RocketPort/RocketModem serial ports installed by this driver are assigned +device major number 46, and will be named /dev/ttyRx, where x is the port number +starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards +installed in the system, the mapping of port names to serial ports is displayed +in the system log at /var/log/messages. + +If installed as a module, the module must be loaded. This can be done +manually by entering "modprobe rocket". To have the module loaded automatically +upon system boot, edit the /etc/modprobe.conf file and add the line +"alias char-major-46 rocket". + +In order to use the ports, their device names (nodes) must be created with mknod. +This is only required once, the system will retain the names once created. To +create the RocketPort/RocketModem device names, use the command +"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero. For example: + +>mknod /dev/ttyR0 c 46 0 +>mknod /dev/ttyR1 c 46 1 +>mknod /dev/ttyR2 c 46 2 + +The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes) +for you: + +>/dev/MAKEDEV ttyR + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +ISA Rocketport Boards +--------------------- + +You must assign and configure the I/O addresses used by the ISA Rocketport +card before installing and using it. This is done by setting a set of DIP +switches on the Rocketport board. + + +SETTING THE I/O ADDRESS +----------------------- + +Before installing RocketPort(R) or RocketPort RA boards, you must find +a range of I/O addresses for it to use. The first RocketPort card +requires a 68-byte contiguous block of I/O addresses, starting at one +of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, +0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP +switches of *all* of the Rocketport cards. + +The second, third, and fourth RocketPort cards require a 64-byte +contiguous block of I/O addresses, starting at one of the following +I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h, +0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the +second, third, and fourth Rocketport cards (if present) are set via +software control. The DIP switch settings for the I/O address must be +set to the value of the first Rocketport cards. + +In order to distinguish each of the card from the others, each card +must have a unique board ID set on the dip switches. The first +Rocketport board must be set with the DIP switches corresponding to +the first board, the second board must be set with the DIP switches +corresponding to the second board, etc. IMPORTANT: The board ID is +the only place where the DIP switch settings should differ between the +various Rocketport boards in a system. + +The I/O address range used by any of the RocketPort cards must not +conflict with any other cards in the system, including other +RocketPort cards. Below, you will find a list of commonly used I/O +address ranges which may be in use by other devices in your system. +On a Linux system, "cat /proc/ioports" will also be helpful in +identifying what I/O addresses are being used by devices on your +system. + +Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it +for 0x100, it will occupy 0x100 to 0x143. This would mean that you +CAN NOT set the second, third or fourth board for address 0x140 since +the first 4 bytes of that range are used by the first board. You would +need to set the second, third, or fourth board to one of the next available +blocks such as 0x180. + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +RocketPort and RocketPort RA SW1 Settings: + + +-------------------------------+ + | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | + +-------+-------+---------------+ + | Unused| Card | I/O Port Block| + +-------------------------------+ + +DIP Switches DIP Switches +7 8 6 5 +=================== =================== +On On UNUSED, MUST BE ON. On On First Card <==== Default + On Off Second Card + Off On Third Card + Off Off Fourth Card + +DIP Switches I/O Address Range +4 3 2 1 Used by the First Card +===================================== +On Off On Off 100-143 +On Off Off On 140-183 +On Off Off Off 180-1C3 <==== Default +Off On On Off 200-243 +Off On Off On 240-283 +Off On Off Off 280-2C3 +Off Off On Off 300-343 +Off Off Off On 340-383 +Off Off Off Off 380-3C3 + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +REPORTING BUGS +-------------- + +For technical support, please provide the following +information: Driver version, kernel release, distribution of +kernel, and type of board you are using. Error messages and log +printouts port configuration details are especially helpful. + +USA + Phone: (612) 494-4100 + FAX: (612) 494-4199 + email: support@comtrol.com + +Comtrol Europe + Phone: +44 (0) 1 869 323-220 + FAX: +44 (0) 1 869 323-211 + email: support@comtrol.co.uk + +Web: http://www.comtrol.com +FTP: ftp.comtrol.com + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + + diff --git a/Documentation/serial/specialix.txt b/Documentation/serial/specialix.txt new file mode 100644 index 000000000000..6eb6f3a3331c --- /dev/null +++ b/Documentation/serial/specialix.txt @@ -0,0 +1,383 @@ + + specialix.txt -- specialix IO8+ multiport serial driver readme. + + + + Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + + Specialix pays for the development and support of this driver. + Please DO contact io8-linux@specialix.co.uk if you require + support. + + This driver was developed in the BitWizard linux device + driver service. If you require a linux device driver for your + product, please contact devices@BitWizard.nl for a quote. + + This code is firmly based on the riscom/8 serial driver, + written by Dmitry Gorodchanin. The specialix IO8+ card + programming information was obtained from the CL-CD1865 Data + Book, and Specialix document number 6200059: IO8+ Hardware + Functional Specification, augmented by document number 6200088: + Merak Hardware Functional Specification. (IO8+/PCI is also + called Merak) + + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + PURPOSE. See the GNU General Public License for more details. + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + USA. + + +Intro +===== + + +This file contains some random information, that I like to have online +instead of in a manual that can get lost. Ever misplace your Linux +kernel sources? And the manual of one of the boards in your computer? + + +Addresses and interrupts +======================== + +Address dip switch settings: +The dip switch sets bits 2-9 of the IO address. + + 9 8 7 6 5 4 3 2 + +-----------------+ + 0 | X X X X X X X | + | | = IoBase = 0x100 + 1 | X | + +-----------------+ ------ RS232 connectors ----> + + | | | + edge connector + | | | + V V V + +Base address 0x100 caused a conflict in one of my computers once. I +haven't the foggiest why. My Specialix card is now at 0x180. My +other computer runs just fine with the Specialix card at 0x100.... +The card occupies 4 addresses, but actually only two are really used. + +The PCI version doesn't have any dip switches. The BIOS assigns +an IO address. + +The driver now still autoprobes at 0x100, 0x180, 0x250 and 0x260. If +that causes trouble for you, please report that. I'll remove +autoprobing then. + +The driver will tell the card what IRQ to use, so you don't have to +change any jumpers to change the IRQ. Just use a command line +argument (irq=xx) to the insmod program to set the interrupt. + +The BIOS assigns the IRQ on the PCI version. You have no say in what +IRQ to use in that case. + +If your specialix cards are not at the default locations, you can use +the kernel command line argument "specialix=io0,irq0,io1,irq1...". +Here "io0" is the io address for the first card, and "irq0" is the +irq line that the first card should use. And so on. + +Examples. + +You use the driver as a module and have three cards at 0x100, 0x250 +and 0x180. And some way or another you want them detected in that +order. Moreover irq 12 is taken (e.g. by your PS/2 mouse). + + insmod specialix.o iobase=0x100,0x250,0x180 irq=9,11,15 + +The same three cards, but now in the kernel would require you to +add + + specialix=0x100,9,0x250,11,0x180,15 + +to the command line. This would become + + append="specialix=0x100,9,0x250,11,0x180,15" + +in your /etc/lilo.conf file if you use lilo. + +The Specialix driver is slightly odd: It allows you to have the second +or third card detected without having a first card. This has +advantages and disadvantages. A slot that isn't filled by an ISA card, +might be filled if a PCI card is detected. Thus if you have an ISA +card at 0x250 and a PCI card, you would get: + +sx0: specialix IO8+ Board at 0x100 not found. +sx1: specialix IO8+ Board at 0x180 not found. +sx2: specialix IO8+ board detected at 0x250, IRQ 12, CD1865 Rev. B. +sx3: specialix IO8+ Board at 0x260 not found. +sx0: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. + +This would happen if you don't give any probe hints to the driver. +If you would specify: + + specialix=0x250,11 + +you'd get the following messages: + +sx0: specialix IO8+ board detected at 0x250, IRQ 11, CD1865 Rev. B. +sx1: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. + +ISA probing is aborted after the IO address you gave is exhausted, and +the PCI card is now detected as the second card. The ISA card is now +also forced to IRQ11.... + + +Baud rates +========== + +The rev 1.2 and below boards use a CL-CD1864. These chips can only +do 64kbit. The rev 1.3 and newer boards use a CL-CD1865. These chips +are officially capable of 115k2. + +The Specialix card uses a 25MHz crystal (in times two mode, which in +fact is a divided by two mode). This is not enough to reach the rated +115k2 on all ports at the same time. With this clock rate you can only +do 37% of this rate. This means that at 115k2 on all ports you are +going to lose characters (The chip cannot handle that many incoming +bits at this clock rate.) (Yes, you read that correctly: there is a +limit to the number of -=bits=- per second that the chip can handle.) + +If you near the "limit" you will first start to see a graceful +degradation in that the chip cannot keep the transmitter busy at all +times. However with a central clock this slow, you can also get it to +miss incoming characters. The driver will print a warning message when +you are outside the official specs. The messages usually show up in +the file /var/log/messages . + +The specialix card cannot reliably do 115k2. If you use it, you have +to do "extensive testing" (*) to verify if it actually works. + +When "mgetty" communicates with my modem at 115k2 it reports: +got: +++[0d]ATQ0V1H0[0d][0d][8a]O[cb][0d][8a] + ^^^^ ^^^^ ^^^^ + +The three characters that have the "^^^" under them have suffered a +bit error in the highest bit. In conclusion: I've tested it, and found +that it simply DOESN'T work for me. I also suspect that this is also +caused by the baud rate being just a little bit out of tune. + +I upgraded the crystal to 66Mhz on one of my Specialix cards. Works +great! Contact me for details. (Voids warranty, requires a steady hand +and more such restrictions....) + + +(*) Cirrus logic CD1864 databook, page 40. + + +Cables for the Specialix IO8+ +============================= + +The pinout of the connectors on the IO8+ is: + + pin short direction long name + name + Pin 1 DCD input Data Carrier Detect + Pin 2 RXD input Receive + Pin 3 DTR/RTS output Data Terminal Ready/Ready To Send + Pin 4 GND - Ground + Pin 5 TXD output Transmit + Pin 6 CTS input Clear To Send + + + -- 6 5 4 3 2 1 -- + | | + | | + | | + | | + +----- -----+ + |__________| + clip + + Front view of an RJ12 connector. Cable moves "into" the paper. + (the plug is ready to plug into your mouth this way...) + + + NULL cable. I don't know who is going to use these except for + testing purposes, but I tested the cards with this cable. (It + took quite a while to figure out, so I'm not going to delete + it. So there! :-) + + + This end goes This end needs + straight into the some twists in + RJ12 plug. the wiring. + IO8+ RJ12 IO8+ RJ12 + 1 DCD white - + - - 1 DCD + 2 RXD black 5 TXD + 3 DTR/RTS red 6 CTS + 4 GND green 4 GND + 5 TXD yellow 2 RXD + 6 CTS blue 3 DTR/RTS + + + Same NULL cable, but now sorted on the second column. + + 1 DCD white - + - - 1 DCD + 5 TXD yellow 2 RXD + 6 CTS blue 3 DTR/RTS + 4 GND green 4 GND + 2 RXD black 5 TXD + 3 DTR/RTS red 6 CTS + + + + This is a modem cable usable for hardware handshaking: + RJ12 DB25 DB9 + 1 DCD white 8 DCD 1 DCD + 2 RXD black 3 RXD 2 RXD + 3 DTR/RTS red 4 RTS 7 RTS + 4 GND green 7 GND 5 GND + 5 TXD yellow 2 TXD 3 TXD + 6 CTS blue 5 CTS 8 CTS + +---- 6 DSR 6 DSR + +---- 20 DTR 4 DTR + + This is a modem cable usable for software handshaking: + It allows you to reset the modem using the DTR ioctls. + I (REW) have never tested this, "but xxxxxxxxxxxxx + says that it works." If you test this, please + tell me and I'll fill in your name on the xxx's. + + RJ12 DB25 DB9 + 1 DCD white 8 DCD 1 DCD + 2 RXD black 3 RXD 2 RXD + 3 DTR/RTS red 20 DTR 4 DTR + 4 GND green 7 GND 5 GND + 5 TXD yellow 2 TXD 3 TXD + 6 CTS blue 5 CTS 8 CTS + +---- 6 DSR 6 DSR + +---- 4 RTS 7 RTS + + I bought a 6 wire flat cable. It was colored as indicated. + Check that yours is the same before you trust me on this. + + +Hardware handshaking issues. +============================ + +The driver can be told to operate in two different ways. The default +behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when +hardware handshaking is off. It behaves as the RTS hardware +handshaking signal when hardware handshaking is selected. + +When you use this, you have to use the appropriate cable. The +cable will either be compatible with hardware handshaking or with +software handshaking. So switching on the fly is not really an +option. + +I actually prefer to use the "specialix.sx_rtscts=1" option. +This makes the DTR/RTS pin always an RTS pin, and ioctls to +change DTR are always ignored. I have a cable that is configured +for this. + + +Ports and devices +================= + +Port 0 is the one furthest from the card-edge connector. + +Devices: + +You should make the devices as follows: + +bash +cd /dev +for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 \ + 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 +do + echo -n "$i " + mknod /dev/ttyW$i c 75 $i + mknod /dev/cuw$i c 76 $i +done +echo "" + +If your system doesn't come with these devices preinstalled, bug your +linux-vendor about this. They have had ample time to get this +implemented by now. + +You cannot have more than 4 boards in one computer. The card only +supports 4 different interrupts. If you really want this, contact me +about this and I'll give you a few tips (requires soldering iron).... + +If you have enough PCI slots, you can probably use more than 4 PCI +versions of the card though.... + +The PCI version of the card cannot adhere to the mechanical part of +the PCI spec because the 8 serial connectors are simply too large. If +it doesn't fit in your computer, bring back the card. + + +------------------------------------------------------------------------ + + + Fixed bugs and restrictions: + - During initialization, interrupts are blindly turned on. + Having a shadow variable would cause an extra memory + access on every IO instruction. + - The interrupt (on the card) should be disabled when we + don't allocate the Linux end of the interrupt. This allows + a different driver/card to use it while all ports are not in + use..... (a la standard serial port) + == An extra _off variant of the sx_in and sx_out macros are + now available. They don't set the interrupt enable bit. + These are used during initialization. Normal operation uses + the old variant which enables the interrupt line. + - RTS/DTR issue needs to be implemented according to + specialix' spec. + I kind of like the "determinism" of the current + implementation. Compile time flag? + == Ok. Compile time flag! Default is how Specialix likes it. + == Now a config time flag! Gets saved in your config file. Neat! + - Can you set the IO address from the lilo command line? + If you need this, bug me about it, I'll make it. + == Hah! No bugging needed. Fixed! :-) + - Cirrus logic hasn't gotten back to me yet why the CD1865 can + and the CD1864 can't do 115k2. I suspect that this is + because the CD1864 is not rated for 33MHz operation. + Therefore the CD1864 versions of the card can't do 115k2 on + all ports just like the CD1865 versions. The driver does + not block 115k2 on CD1864 cards. + == I called the Cirrus Logic representative here in Holland. + The CD1864 databook is identical to the CD1865 databook, + except for an extra warning at the end. Similar Bit errors + have been observed in testing at 115k2 on both an 1865 and + a 1864 chip. I see no reason why I would prohibit 115k2 on + 1864 chips and not do it on 1865 chips. Actually there is + reason to prohibit it on BOTH chips. I print a warning. + If you use 115k2, you're on your own. + - A spiky CD may send spurious HUPs. Also in CLOCAL??? + -- A fix for this turned out to be counter productive. + Different fix? Current behaviour is acceptable? + -- Maybe the current implementation is correct. If anybody + gets bitten by this, please report, and it will get fixed. + + -- Testing revealed that when in CLOCAL, the problem doesn't + occur. As warned for in the CD1865 manual, the chip may + send modem intr's on a spike. We could filter those out, + but that would be a cludge anyway (You'd still risk getting + a spurious HUP when two spikes occur.)..... + + + + Bugs & restrictions: + - This is a difficult card to autoprobe. + You have to WRITE to the address register to even + read-probe a CD186x register. Disable autodetection? + -- Specialix: any suggestions? + + diff --git a/Documentation/serial/stallion.txt b/Documentation/serial/stallion.txt new file mode 100644 index 000000000000..5c4902d9a5be --- /dev/null +++ b/Documentation/serial/stallion.txt @@ -0,0 +1,392 @@ +* NOTE - This is an unmaintained driver. Lantronix, which bought Stallion +technologies, is not active in driver maintenance, and they have no information +on when or if they will have a 2.6 driver. + +James Nelson - 12-12-2004 + +Stallion Multiport Serial Driver Readme +--------------------------------------- + +Copyright (C) 1994-1999, Stallion Technologies. + +Version: 5.5.1 +Date: 28MAR99 + + + +1. INTRODUCTION + +There are two drivers that work with the different families of Stallion +multiport serial boards. One is for the Stallion smart boards - that is +EasyIO, EasyConnection 8/32 and EasyConnection 8/64-PCI, the other for +the true Stallion intelligent multiport boards - EasyConnection 8/64 +(ISA, EISA, MCA), EasyConnection/RA-PCI, ONboard and Brumby. + +If you are using any of the Stallion intelligent multiport boards (Brumby, +ONboard, EasyConnection 8/64 (ISA, EISA, MCA), EasyConnection/RA-PCI) with +Linux you will need to get the driver utility package. This contains a +firmware loader and the firmware images necessary to make the devices operate. + +The Stallion Technologies ftp site, ftp.stallion.com, will always have +the latest version of the driver utility package. + +ftp://ftp.stallion.com/drivers/ata5/Linux/ata-linux-550.tar.gz + +As of the printing of this document the latest version of the driver +utility package is 5.5.0. If a later version is now available then you +should use the latest version. + +If you are using the EasyIO, EasyConnection 8/32 or EasyConnection 8/64-PCI +boards then you don't need this package, although it does have a serial stats +display program. + +If you require DIP switch settings, EISA or MCA configuration files, or any +other information related to Stallion boards then have a look at Stallion's +web pages at http://www.stallion.com. + + + +2. INSTALLATION + +The drivers can be used as loadable modules or compiled into the kernel. +You can choose which when doing a "config" on the kernel. + +All ISA, EISA and MCA boards that you want to use need to be configured into +the driver(s). All PCI boards will be automatically detected when you load +the driver - so they do not need to be entered into the driver(s) +configuration structure. Note that kernel PCI support is required to use PCI +boards. + +There are two methods of configuring ISA, EISA and MCA boards into the drivers. +If using the driver as a loadable module then the simplest method is to pass +the driver configuration as module arguments. The other method is to modify +the driver source to add configuration lines for each board in use. + +If you have pre-built Stallion driver modules then the module argument +configuration method should be used. A lot of Linux distributions come with +pre-built driver modules in /lib/modules/X.Y.Z/misc for the kernel in use. +That makes things pretty simple to get going. + + +2.1 MODULE DRIVER CONFIGURATION: + +The simplest configuration for modules is to use the module load arguments +to configure any ISA, EISA or MCA boards. PCI boards are automatically +detected, so do not need any additional configuration at all. + +If using EasyIO, EasyConnection 8/32 ISA or MCA, or EasyConnection 8/63-PCI +boards then use the "stallion" driver module, Otherwise if you are using +an EasyConnection 8/64 ISA, EISA or MCA, EasyConnection/RA-PCI, ONboard, +Brumby or original Stallion board then use the "istallion" driver module. + +Typically to load up the smart board driver use: + + modprobe stallion + +This will load the EasyIO and EasyConnection 8/32 driver. It will output a +message to say that it loaded and print the driver version number. It will +also print out whether it found the configured boards or not. These messages +may not appear on the console, but typically are always logged to +/var/adm/messages or /var/log/syslog files - depending on how the klogd and +syslogd daemons are setup on your system. + +To load the intelligent board driver use: + + modprobe istallion + +It will output similar messages to the smart board driver. + +If not using an auto-detectable board type (that is a PCI board) then you +will also need to supply command line arguments to the modprobe command +when loading the driver. The general form of the configuration argument is + + board?=[,[,][,]] + +where: + + board? -- specifies the arbitrary board number of this board, + can be in the range 0 to 3. + + name -- textual name of this board. The board name is the common + board name, or any "shortened" version of that. The board + type number may also be used here. + + ioaddr -- specifies the I/O address of this board. This argument is + optional, but should generally be specified. + + addr -- optional second address argument. Some board types require + a second I/O address, some require a memory address. The + exact meaning of this argument depends on the board type. + + irq -- optional IRQ line used by this board. + +Up to 4 board configuration arguments can be specified on the load line. +Here is some examples: + + modprobe stallion board0=easyio,0x2a0,5 + +This configures an EasyIO board as board 0 at I/O address 0x2a0 and IRQ 5. + + modprobe istallion board3=ec8/64,0x2c0,0xcc000 + +This configures an EasyConnection 8/64 ISA as board 3 at I/O address 0x2c0 at +memory address 0xcc000. + + modprobe stallion board1=ec8/32-at,0x2a0,0x280,10 + +This configures an EasyConnection 8/32 ISA board at primary I/O address 0x2a0, +secondary address 0x280 and IRQ 10. + +You will probably want to enter this module load and configuration information +into your system startup scripts so that the drivers are loaded and configured +on each system boot. Typically the start up script would be something like +/etc/modprobe.conf. + + +2.2 STATIC DRIVER CONFIGURATION: + +For static driver configuration you need to modify the driver source code. +Entering ISA, EISA and MCA boards into the driver(s) configuration structure +involves editing the driver(s) source file. It's pretty easy if you follow +the instructions below. Both drivers can support up to 4 boards. The smart +card driver (the stallion.c driver) supports any combination of EasyIO and +EasyConnection 8/32 boards (up to a total of 4). The intelligent driver +supports any combination of ONboards, Brumbys, Stallions and EasyConnection +8/64 (ISA and EISA) boards (up to a total of 4). + +To set up the driver(s) for the boards that you want to use you need to +edit the appropriate driver file and add configuration entries. + +If using EasyIO or EasyConnection 8/32 ISA or MCA boards, + In drivers/char/stallion.c: + - find the definition of the stl_brdconf array (of structures) + near the top of the file + - modify this to match the boards you are going to install + (the comments before this structure should help) + - save and exit + +If using ONboard, Brumby, Stallion or EasyConnection 8/64 (ISA or EISA) +boards, + In drivers/char/istallion.c: + - find the definition of the stli_brdconf array (of structures) + near the top of the file + - modify this to match the boards you are going to install + (the comments before this structure should help) + - save and exit + +Once you have set up the board configurations then you are ready to build +the kernel or modules. + +When the new kernel is booted, or the loadable module loaded then the +driver will emit some kernel trace messages about whether the configured +boards were detected or not. Depending on how your system logger is set +up these may come out on the console, or just be logged to +/var/adm/messages or /var/log/syslog. You should check the messages to +confirm that all is well. + + +2.3 SHARING INTERRUPTS + +It is possible to share interrupts between multiple EasyIO and +EasyConnection 8/32 boards in an EISA system. To do this you must be using +static driver configuration, modifying the driver source code to add driver +configuration. Then a couple of extra things are required: + +1. When entering the board resources into the stallion.c file you need to + mark the boards as using level triggered interrupts. Do this by replacing + the "0" entry at field position 6 (the last field) in the board + configuration structure with a "1". (This is the structure that defines + the board type, I/O locations, etc. for each board). All boards that are + sharing an interrupt must be set this way, and each board should have the + same interrupt number specified here as well. Now build the module or + kernel as you would normally. + +2. When physically installing the boards into the system you must enter + the system EISA configuration utility. You will need to install the EISA + configuration files for *all* the EasyIO and EasyConnection 8/32 boards + that are sharing interrupts. The Stallion EasyIO and EasyConnection 8/32 + EISA configuration files required are supplied by Stallion Technologies + on the EASY Utilities floppy diskette (usually supplied in the box with + the board when purchased. If not, you can pick it up from Stallion's FTP + site, ftp.stallion.com). You will need to edit the board resources to + choose level triggered interrupts, and make sure to set each board's + interrupt to the same IRQ number. + +You must complete both the above steps for this to work. When you reboot +or load the driver your EasyIO and EasyConnection 8/32 boards will be +sharing interrupts. + + +2.4 USING HIGH SHARED MEMORY + +The EasyConnection 8/64-EI, ONboard and Stallion boards are capable of +using shared memory addresses above the usual 640K - 1Mb range. The ONboard +ISA and the Stallion boards can be programmed to use memory addresses up to +16Mb (the ISA bus addressing limit), and the EasyConnection 8/64-EI and +ONboard/E can be programmed for memory addresses up to 4Gb (the EISA bus +addressing limit). + +The higher than 1Mb memory addresses are fully supported by this driver. +Just enter the address as you normally would for a lower than 1Mb address +(in the driver's board configuration structure). + + + +2.5 TROUBLE SHOOTING + +If a board is not found by the driver but is actually in the system then the +most likely problem is that the I/O address is wrong. Change the module load +argument for the loadable module form. Or change it in the driver stallion.c +or istallion.c configuration structure and rebuild the kernel or modules, or +change it on the board. + +On EasyIO and EasyConnection 8/32 boards the IRQ is software programmable, so +if there is a conflict you may need to change the IRQ used for a board. There +are no interrupts to worry about for ONboard, Brumby or EasyConnection 8/64 +(ISA, EISA and MCA) boards. The memory region on EasyConnection 8/64 and +ONboard boards is software programmable, but not on the Brumby boards. + + + +3. USING THE DRIVERS + +3.1 INTELLIGENT DRIVER OPERATION + +The intelligent boards also need to have their "firmware" code downloaded +to them. This is done via a user level application supplied in the driver +utility package called "stlload". Compile this program wherever you dropped +the package files, by typing "make". In its simplest form you can then type + + ./stlload -i cdk.sys + +in this directory and that will download board 0 (assuming board 0 is an +EasyConnection 8/64 or EasyConnection/RA board). To download to an +ONboard, Brumby or Stallion do: + + ./stlload -i 2681.sys + +Normally you would want all boards to be downloaded as part of the standard +system startup. To achieve this, add one of the lines above into the +/etc/rc.d/rc.S or /etc/rc.d/rc.serial file. To download each board just add +the "-b " option to the line. You will need to download code for +every board. You should probably move the stlload program into a system +directory, such as /usr/sbin. Also, the default location of the cdk.sys image +file in the stlload down-loader is /usr/lib/stallion. Create that directory +and put the cdk.sys and 2681.sys files in it. (It's a convenient place to put +them anyway). As an example your /etc/rc.d/rc.S file might have the +following lines added to it (if you had 3 boards): + + /usr/sbin/stlload -b 0 -i /usr/lib/stallion/cdk.sys + /usr/sbin/stlload -b 1 -i /usr/lib/stallion/2681.sys + /usr/sbin/stlload -b 2 -i /usr/lib/stallion/2681.sys + +The image files cdk.sys and 2681.sys are specific to the board types. The +cdk.sys will only function correctly on an EasyConnection 8/64 board. Similarly +the 2681.sys image fill only operate on ONboard, Brumby and Stallion boards. +If you load the wrong image file into a board it will fail to start up, and +of course the ports will not be operational! + +If you are using the modularized version of the driver you might want to put +the modprobe calls in the startup script as well (before the download lines +obviously). + + +3.2 USING THE SERIAL PORTS + +Once the driver is installed you will need to setup some device nodes to +access the serial ports. The simplest method is to use the /dev/MAKEDEV program. +It will automatically create device entries for Stallion boards. This will +create the normal serial port devices as /dev/ttyE# where# is the port number +starting from 0. A bank of 64 minor device numbers is allocated to each board, +so the first port on the second board is port 64,etc. A set of callout type +devices may also be created. They are created as the devices /dev/cue# where # +is the same as for the ttyE devices. + +For the most part the Stallion driver tries to emulate the standard PC system +COM ports and the standard Linux serial driver. The idea is that you should +be able to use Stallion board ports and COM ports interchangeably without +modifying anything but the device name. Anything that doesn't work like that +should be considered a bug in this driver! + +If you look at the driver code you will notice that it is fairly closely +based on the Linux serial driver (linux/drivers/char/serial.c). This is +intentional, obviously this is the easiest way to emulate its behavior! + +Since this driver tries to emulate the standard serial ports as much as +possible, most system utilities should work as they do for the standard +COM ports. Most importantly "stty" works as expected and "setserial" can +also be used (excepting the ability to auto-configure the I/O and IRQ +addresses of boards). Higher baud rates are supported in the usual fashion +through setserial or using the CBAUDEX extensions. Note that the EasyIO and +EasyConnection (all types) support at least 57600 and 115200 baud. The newer +EasyConnection XP modules and new EasyIO boards support 230400 and 460800 +baud as well. The older boards including ONboard and Brumby support a +maximum baud rate of 38400. + +If you are unfamiliar with how to use serial ports, then get the Serial-HOWTO +by Greg Hankins. It will explain everything you need to know! + + + +4. NOTES + +You can use both drivers at once if you have a mix of board types installed +in a system. However to do this you will need to change the major numbers +used by one of the drivers. Currently both drivers use major numbers 24, 25 +and 28 for their devices. Change one driver to use some other major numbers, +and then modify the mkdevnods script to make device nodes based on those new +major numbers. For example, you could change the istallion.c driver to use +major numbers 60, 61 and 62. You will also need to create device nodes with +different names for the ports, for example ttyF# and cuf#. + +The original Stallion board is no longer supported by Stallion Technologies. +Although it is known to work with the istallion driver. + +Finding a free physical memory address range can be a problem. The older +boards like the Stallion and ONboard need large areas (64K or even 128K), so +they can be very difficult to get into a system. If you have 16 Mb of RAM +then you have no choice but to put them somewhere in the 640K -> 1Mb range. +ONboards require 64K, so typically 0xd0000 is good, or 0xe0000 on some +systems. If you have an original Stallion board, "V4.0" or Rev.O, then you +need a 64K memory address space, so again 0xd0000 and 0xe0000 are good. +Older Stallion boards are a much bigger problem. They need 128K of address +space and must be on a 128K boundary. If you don't have a VGA card then +0xc0000 might be usable - there is really no other place you can put them +below 1Mb. + +Both the ONboard and old Stallion boards can use higher memory addresses as +well, but you must have less than 16Mb of RAM to be able to use them. Usual +high memory addresses used include 0xec0000 and 0xf00000. + +The Brumby boards only require 16Kb of address space, so you can usually +squeeze them in somewhere. Common addresses are 0xc8000, 0xcc000, or in +the 0xd0000 range. EasyConnection 8/64 boards are even better, they only +require 4Kb of address space, again usually 0xc8000, 0xcc000 or 0xd0000 +are good. + +If you are using an EasyConnection 8/64-EI or ONboard/E then usually the +0xd0000 or 0xe0000 ranges are the best options below 1Mb. If neither of +them can be used then the high memory support to use the really high address +ranges is the best option. Typically the 2Gb range is convenient for them, +and gets them well out of the way. + +The ports of the EasyIO-8M board do not have DCD or DTR signals. So these +ports cannot be used as real modem devices. Generally, when using these +ports you should only use the cueX devices. + +The driver utility package contains a couple of very useful programs. One +is a serial port statistics collection and display program - very handy +for solving serial port problems. The other is an extended option setting +program that works with the intelligent boards. + + + +5. DISCLAIMER + +The information contained in this document is believed to be accurate and +reliable. However, no responsibility is assumed by Stallion Technologies +Pty. Ltd. for its use, nor any infringements of patents or other rights +of third parties resulting from its use. Stallion Technologies reserves +the right to modify the design of its products and will endeavour to change +the information in manuals and accompanying documentation accordingly. + diff --git a/Documentation/serial/sx.txt b/Documentation/serial/sx.txt new file mode 100644 index 000000000000..cb4efa0fb5cc --- /dev/null +++ b/Documentation/serial/sx.txt @@ -0,0 +1,294 @@ + + sx.txt -- specialix SX/SI multiport serial driver readme. + + + + Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + + Specialix pays for the development and support of this driver. + Please DO contact support@specialix.co.uk if you require + support. + + This driver was developed in the BitWizard linux device + driver service. If you require a linux device driver for your + product, please contact devices@BitWizard.nl for a quote. + + (History) + There used to be an SI driver by Simon Allan. This is a complete + rewrite from scratch. Just a few lines-of-code have been snatched. + + (Sources) + Specialix document number 6210028: SX Host Card and Download Code + Software Functional Specification. + + (Copying) + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + PURPOSE. See the GNU General Public License for more details. + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + USA. + + (Addendum) + I'd appreciate it that if you have fixes, that you send them + to me first. + + +Introduction +============ + +This file contains some random information, that I like to have online +instead of in a manual that can get lost. Ever misplace your Linux +kernel sources? And the manual of one of the boards in your computer? + + +Theory of operation +=================== + +An important thing to know is that the driver itself doesn't have the +firmware for the card. This means that you need the separate package +"sx_firmware". For now you can get the source at + + ftp://ftp.bitwizard.nl/specialix/sx_firmware_.tgz + +The firmware load needs a "misc" device, so you'll need to enable the +"Support for user misc device modules" in your kernel configuration. +The misc device needs to be called "/dev/specialix_sxctl". It needs +misc major 10, and minor number 167 (assigned by HPA). The section +on creating device files below also creates this device. + +After loading the sx.o module into your kernel, the driver will report +the number of cards detected, but because it doesn't have any +firmware, it will not be able to determine the number of ports. Only +when you then run "sx_firmware" will the firmware be downloaded and +the rest of the driver initialized. At that time the sx_firmware +program will report the number of ports installed. + +In contrast with many other multi port serial cards, some of the data +structures are only allocated when the card knows the number of ports +that are connected. This means we won't waste memory for 120 port +descriptor structures when you only have 8 ports. If you experience +problems due to this, please report them: I haven't seen any. + + +Interrupts +========== + +A multi port serial card, would generate a horrendous amount of +interrupts if it would interrupt the CPU for every received +character. Even more than 10 years ago, the trick not to use +interrupts but to poll the serial cards was invented. + +The SX card allow us to do this two ways. First the card limits its +own interrupt rate to a rate that won't overwhelm the CPU. Secondly, +we could forget about the cards interrupt completely and use the +internal timer for this purpose. + +Polling the card can take up to a few percent of your CPU. Using the +interrupts would be better if you have most of the ports idle. Using +timer-based polling is better if your card almost always has work to +do. You save the separate interrupt in that case. + +In any case, it doesn't really matter all that much. + +The most common problem with interrupts is that for ISA cards in a PCI +system the BIOS has to be told to configure that interrupt as "legacy +ISA". Otherwise the card can pull on the interrupt line all it wants +but the CPU won't see this. + +If you can't get the interrupt to work, remember that polling mode is +more efficient (provided you actually use the card intensively). + + +Allowed Configurations +====================== + +Some configurations are disallowed. Even though at a glance they might +seem to work, they are known to lockup the bus between the host card +and the device concentrators. You should respect the drivers decision +not to support certain configurations. It's there for a reason. + +Warning: Seriously technical stuff ahead. Executive summary: Don't use +SX cards except configured at a 64k boundary. Skip the next paragraph. + +The SX cards can theoretically be placed at a 32k boundary. So for +instance you can put an SX card at 0xc8000-0xd7fff. This is not a +"recommended configuration". ISA cards have to tell the bus controller +how they like their timing. Due to timing issues they have to do this +based on which 64k window the address falls into. This means that the +32k window below and above the SX card have to use exactly the same +timing as the SX card. That reportedly works for other SX cards. But +you're still left with two useless 32k windows that should not be used +by anybody else. + + +Configuring the driver +====================== + +PCI cards are always detected. The driver auto-probes for ISA cards at +some sensible addresses. Please report if the auto-probe causes trouble +in your system, or when a card isn't detected. + +I'm afraid I haven't implemented "kernel command line parameters" yet. +This means that if the default doesn't work for you, you shouldn't use +the compiled-into-the-kernel version of the driver. Use a module +instead. If you convince me that you need this, I'll make it for +you. Deal? + +I'm afraid that the module parameters are a bit clumsy. If you have a +better idea, please tell me. + +You can specify several parameters: + + sx_poll: number of jiffies between timer-based polls. + + Set this to "0" to disable timer based polls. + Initialization of cards without a working interrupt + will fail. + + Set this to "1" if you want a polling driver. + (on Intel: 100 polls per second). If you don't use + fast baud rates, you might consider a value like "5". + (If you don't know how to do the math, use 1). + + sx_slowpoll: Number of jiffies between timer-based polls. + Set this to "100" to poll once a second. + This should get the card out of a stall if the driver + ever misses an interrupt. I've never seen this happen, + and if it does, that's a bug. Tell me. + + sx_maxints: Number of interrupts to request from the card. + The card normally limits interrupts to about 100 per + second to offload the host CPU. You can increase this + number to reduce latency on the card a little. + Note that if you give a very high number you can overload + your CPU as well as the CPU on the host card. This setting + is inaccurate and not recommended for SI cards (But it + works). + + sx_irqmask: The mask of allowable IRQs to use. I suggest you set + this to 0 (disable IRQs all together) and use polling if + the assignment of IRQs becomes problematic. This is defined + as the sum of (1 << irq) 's that you want to allow. So + sx_irqmask of 8 (1 << 3) specifies that only irq 3 may + be used by the SX driver. If you want to specify to the + driver: "Either irq 11 or 12 is ok for you to use", then + specify (1 << 11) | (1 << 12) = 0x1800 . + + sx_debug: You can enable different sorts of debug traces with this. + At "-1" all debugging traces are active. You'll get several + times more debugging output than you'll get characters + transmitted. + + +Baud rates +========== + +Theoretically new SXDCs should be capable of more than 460k +baud. However the line drivers usually give up before that. Also the +CPU on the card may not be able to handle 8 channels going at full +blast at that speed. Moreover, the buffers are not large enough to +allow operation with 100 interrupts per second. You'll have to realize +that the card has a 256 byte buffer, so you'll have to increase the +number of interrupts per second if you have more than 256*100 bytes +per second to transmit. If you do any performance testing in this +area, I'd be glad to hear from you... + +(Psst Linux users..... I think the Linux driver is more efficient than +the driver for other OSes. If you can and want to benchmark them +against each other, be my guest, and report your findings...... :-) + + +Ports and devices +================= + +Port 0 is the top connector on the module closest to the host +card. Oh, the ports on the SXDCs and TAs are labelled from 1 to 8 +instead of from 0 to 7, as they are numbered by linux. I'm stubborn in +this: I know for sure that I wouldn't be able to calculate which port +is which anymore if I would change that.... + + +Devices: + +You should make the device files as follows: + +#!/bin/sh +# (I recommend that you cut-and-paste this into a file and run that) +cd /dev +t=0 +mknod specialix_sxctl c 10 167 +while [ $t -lt 64 ] + do + echo -n "$t " + mknod ttyX$t c 32 $t + mknod cux$t c 33 $t + t=`expr $t + 1` +done +echo "" +rm /etc/psdevtab +ps > /dev/null + + +This creates 64 devices. If you have more, increase the constant on +the line with "while". The devices start at 0, as is customary on +Linux. Specialix seems to like starting the numbering at 1. + +If your system doesn't come with these devices pre-installed, bug your +linux-vendor about this. They should have these devices +"pre-installed" before the new millennium. The "ps" stuff at the end +is to "tell" ps that the new devices exist. + +Officially the maximum number of cards per computer is 4. This driver +however supports as many cards in one machine as you want. You'll run +out of interrupts after a few, but you can switch to polled operation +then. At about 256 ports (More than 8 cards), we run out of minor +device numbers. Sorry. I suggest you buy a second computer.... (Or +switch to RIO). + +------------------------------------------------------------------------ + + + Fixed bugs and restrictions: + - Hangup processing. + -- Done. + + - the write path in generic_serial (lockup / oops). + -- Done (Ugly: not the way I want it. Copied from serial.c). + + - write buffer isn't flushed at close. + -- Done. I still seem to lose a few chars at close. + Sorry. I think that this is a firmware issue. (-> Specialix) + + - drain hardware before changing termios + - Change debug on the fly. + - ISA free irq -1. (no firmware loaded). + - adding c8000 as a probe address. Added warning. + - Add a RAMtest for the RAM on the card.c + - Crash when opening a port "way" of the number of allowed ports. + (for example opening port 60 when there are only 24 ports attached) + - Sometimes the use-count strays a bit. After a few hours of + testing the use count is sometimes "3". If you are not like + me and can remember what you did to get it that way, I'd + appreciate an Email. Possibly fixed. Tell me if anyone still + sees this. + - TAs don't work right if you don't connect all the modem control + signals. SXDCs do. T225 firmware problem -> Specialix. + (Mostly fixed now, I think. Tell me if you encounter this!) + + Bugs & restrictions: + + - Arbitrary baud rates. Requires firmware update. (-> Specialix) + + - Low latency (mostly firmware, -> Specialix) + + + diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt new file mode 100644 index 000000000000..8e65c4498c52 --- /dev/null +++ b/Documentation/serial/tty.txt @@ -0,0 +1,292 @@ + + The Lockronomicon + +Your guide to the ancient and twisted locking policies of the tty layer and +the warped logic behind them. Beware all ye who read on. + +FIXME: still need to work out the full set of BKL assumptions and document +them so they can eventually be killed off. + + +Line Discipline +--------------- + +Line disciplines are registered with tty_register_ldisc() passing the +discipline number and the ldisc structure. At the point of registration the +discipline must be ready to use and it is possible it will get used before +the call returns success. If the call returns an error then it won't get +called. Do not re-use ldisc numbers as they are part of the userspace ABI +and writing over an existing ldisc will cause demons to eat your computer. +After the return the ldisc data has been copied so you may free your own +copy of the structure. You must not re-register over the top of the line +discipline even with the same data or your computer again will be eaten by +demons. + +In order to remove a line discipline call tty_unregister_ldisc(). +In ancient times this always worked. In modern times the function will +return -EBUSY if the ldisc is currently in use. Since the ldisc referencing +code manages the module counts this should not usually be a concern. + +Heed this warning: the reference count field of the registered copies of the +tty_ldisc structure in the ldisc table counts the number of lines using this +discipline. The reference count of the tty_ldisc structure within a tty +counts the number of active users of the ldisc at this instant. In effect it +counts the number of threads of execution within an ldisc method (plus those +about to enter and exit although this detail matters not). + +Line Discipline Methods +----------------------- + +TTY side interfaces: + +open() - Called when the line discipline is attached to + the terminal. No other call into the line + discipline for this tty will occur until it + completes successfully. Can sleep. + +close() - This is called on a terminal when the line + discipline is being unplugged. At the point of + execution no further users will enter the + ldisc code for this tty. Can sleep. + +hangup() - Called when the tty line is hung up. + The line discipline should cease I/O to the tty. + No further calls into the ldisc code will occur. + Can sleep. + +write() - A process is writing data through the line + discipline. Multiple write calls are serialized + by the tty layer for the ldisc. May sleep. + +flush_buffer() - (optional) May be called at any point between + open and close, and instructs the line discipline + to empty its input buffer. + +chars_in_buffer() - (optional) Report the number of bytes in the input + buffer. + +set_termios() - (optional) Called on termios structure changes. + The caller passes the old termios data and the + current data is in the tty. Called under the + termios semaphore so allowed to sleep. Serialized + against itself only. + +read() - Move data from the line discipline to the user. + Multiple read calls may occur in parallel and the + ldisc must deal with serialization issues. May + sleep. + +poll() - Check the status for the poll/select calls. Multiple + poll calls may occur in parallel. May sleep. + +ioctl() - Called when an ioctl is handed to the tty layer + that might be for the ldisc. Multiple ioctl calls + may occur in parallel. May sleep. + +Driver Side Interfaces: + +receive_buf() - Hand buffers of bytes from the driver to the ldisc + for processing. Semantics currently rather + mysterious 8( + +write_wakeup() - May be called at any point between open and close. + The TTY_DO_WRITE_WAKEUP flag indicates if a call + is needed but always races versus calls. Thus the + ldisc must be careful about setting order and to + handle unexpected calls. Must not sleep. + + The driver is forbidden from calling this directly + from the ->write call from the ldisc as the ldisc + is permitted to call the driver write method from + this function. In such a situation defer it. + + +Driver Access + +Line discipline methods can call the following methods of the underlying +hardware driver through the function pointers within the tty->driver +structure: + +write() Write a block of characters to the tty device. + Returns the number of characters accepted. The + character buffer passed to this method is already + in kernel space. + +put_char() Queues a character for writing to the tty device. + If there is no room in the queue, the character is + ignored. + +flush_chars() (Optional) If defined, must be called after + queueing characters with put_char() in order to + start transmission. + +write_room() Returns the numbers of characters the tty driver + will accept for queueing to be written. + +ioctl() Invoke device specific ioctl. + Expects data pointers to refer to userspace. + Returns ENOIOCTLCMD for unrecognized ioctl numbers. + +set_termios() Notify the tty driver that the device's termios + settings have changed. New settings are in + tty->termios. Previous settings should be passed in + the "old" argument. + + The API is defined such that the driver should return + the actual modes selected. This means that the + driver function is responsible for modifying any + bits in the request it cannot fulfill to indicate + the actual modes being used. A device with no + hardware capability for change (eg a USB dongle or + virtual port) can provide NULL for this method. + +throttle() Notify the tty driver that input buffers for the + line discipline are close to full, and it should + somehow signal that no more characters should be + sent to the tty. + +unthrottle() Notify the tty driver that characters can now be + sent to the tty without fear of overrunning the + input buffers of the line disciplines. + +stop() Ask the tty driver to stop outputting characters + to the tty device. + +start() Ask the tty driver to resume sending characters + to the tty device. + +hangup() Ask the tty driver to hang up the tty device. + +break_ctl() (Optional) Ask the tty driver to turn on or off + BREAK status on the RS-232 port. If state is -1, + then the BREAK status should be turned on; if + state is 0, then BREAK should be turned off. + If this routine is not implemented, use ioctls + TIOCSBRK / TIOCCBRK instead. + +wait_until_sent() Waits until the device has written out all of the + characters in its transmitter FIFO. + +send_xchar() Send a high-priority XON/XOFF character to the device. + + +Flags + +Line discipline methods have access to tty->flags field containing the +following interesting flags: + +TTY_THROTTLED Driver input is throttled. The ldisc should call + tty->driver->unthrottle() in order to resume + reception when it is ready to process more data. + +TTY_DO_WRITE_WAKEUP If set, causes the driver to call the ldisc's + write_wakeup() method in order to resume + transmission when it can accept more data + to transmit. + +TTY_IO_ERROR If set, causes all subsequent userspace read/write + calls on the tty to fail, returning -EIO. + +TTY_OTHER_CLOSED Device is a pty and the other side has closed. + +TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into + smaller chunks. + + +Locking + +Callers to the line discipline functions from the tty layer are required to +take line discipline locks. The same is true of calls from the driver side +but not yet enforced. + +Three calls are now provided + + ldisc = tty_ldisc_ref(tty); + +takes a handle to the line discipline in the tty and returns it. If no ldisc +is currently attached or the ldisc is being closed and re-opened at this +point then NULL is returned. While this handle is held the ldisc will not +change or go away. + + tty_ldisc_deref(ldisc) + +Returns the ldisc reference and allows the ldisc to be closed. Returning the +reference takes away your right to call the ldisc functions until you take +a new reference. + + ldisc = tty_ldisc_ref_wait(tty); + +Performs the same function as tty_ldisc_ref except that it will wait for an +ldisc change to complete and then return a reference to the new ldisc. + +While these functions are slightly slower than the old code they should have +minimal impact as most receive logic uses the flip buffers and they only +need to take a reference when they push bits up through the driver. + +A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc +functions are called with the ldisc unavailable. Thus tty_ldisc_ref will +fail in this situation if used within these functions. Ldisc and driver +code calling its own functions must be careful in this case. + + +Driver Interface +---------------- + +open() - Called when a device is opened. May sleep + +close() - Called when a device is closed. At the point of + return from this call the driver must make no + further ldisc calls of any kind. May sleep + +write() - Called to write bytes to the device. May not + sleep. May occur in parallel in special cases. + Because this includes panic paths drivers generally + shouldn't try and do clever locking here. + +put_char() - Stuff a single character onto the queue. The + driver is guaranteed following up calls to + flush_chars. + +flush_chars() - Ask the kernel to write put_char queue + +write_room() - Return the number of characters tht can be stuffed + into the port buffers without overflow (or less). + The ldisc is responsible for being intelligent + about multi-threading of write_room/write calls + +ioctl() - Called when an ioctl may be for the driver + +set_termios() - Called on termios change, serialized against + itself by a semaphore. May sleep. + +set_ldisc() - Notifier for discipline change. At the point this + is done the discipline is not yet usable. Can now + sleep (I think) + +throttle() - Called by the ldisc to ask the driver to do flow + control. Serialization including with unthrottle + is the job of the ldisc layer. + +unthrottle() - Called by the ldisc to ask the driver to stop flow + control. + +stop() - Ldisc notifier to the driver to stop output. As with + throttle the serializations with start() are down + to the ldisc layer. + +start() - Ldisc notifier to the driver to start output. + +hangup() - Ask the tty driver to cause a hangup initiated + from the host side. [Can sleep ??] + +break_ctl() - Send RS232 break. Can sleep. Can get called in + parallel, driver must serialize (for now), and + with write calls. + +wait_until_sent() - Wait for characters to exit the hardware queue + of the driver. Can sleep + +send_xchar() - Send XON/XOFF and if possible jump the queue with + it in order to get fast flow control responses. + Cannot sleep ?? + diff --git a/Documentation/specialix.txt b/Documentation/specialix.txt deleted file mode 100644 index 6eb6f3a3331c..000000000000 --- a/Documentation/specialix.txt +++ /dev/null @@ -1,383 +0,0 @@ - - specialix.txt -- specialix IO8+ multiport serial driver readme. - - - - Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - - Specialix pays for the development and support of this driver. - Please DO contact io8-linux@specialix.co.uk if you require - support. - - This driver was developed in the BitWizard linux device - driver service. If you require a linux device driver for your - product, please contact devices@BitWizard.nl for a quote. - - This code is firmly based on the riscom/8 serial driver, - written by Dmitry Gorodchanin. The specialix IO8+ card - programming information was obtained from the CL-CD1865 Data - Book, and Specialix document number 6200059: IO8+ Hardware - Functional Specification, augmented by document number 6200088: - Merak Hardware Functional Specification. (IO8+/PCI is also - called Merak) - - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of - the License, or (at your option) any later version. - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - USA. - - -Intro -===== - - -This file contains some random information, that I like to have online -instead of in a manual that can get lost. Ever misplace your Linux -kernel sources? And the manual of one of the boards in your computer? - - -Addresses and interrupts -======================== - -Address dip switch settings: -The dip switch sets bits 2-9 of the IO address. - - 9 8 7 6 5 4 3 2 - +-----------------+ - 0 | X X X X X X X | - | | = IoBase = 0x100 - 1 | X | - +-----------------+ ------ RS232 connectors ----> - - | | | - edge connector - | | | - V V V - -Base address 0x100 caused a conflict in one of my computers once. I -haven't the foggiest why. My Specialix card is now at 0x180. My -other computer runs just fine with the Specialix card at 0x100.... -The card occupies 4 addresses, but actually only two are really used. - -The PCI version doesn't have any dip switches. The BIOS assigns -an IO address. - -The driver now still autoprobes at 0x100, 0x180, 0x250 and 0x260. If -that causes trouble for you, please report that. I'll remove -autoprobing then. - -The driver will tell the card what IRQ to use, so you don't have to -change any jumpers to change the IRQ. Just use a command line -argument (irq=xx) to the insmod program to set the interrupt. - -The BIOS assigns the IRQ on the PCI version. You have no say in what -IRQ to use in that case. - -If your specialix cards are not at the default locations, you can use -the kernel command line argument "specialix=io0,irq0,io1,irq1...". -Here "io0" is the io address for the first card, and "irq0" is the -irq line that the first card should use. And so on. - -Examples. - -You use the driver as a module and have three cards at 0x100, 0x250 -and 0x180. And some way or another you want them detected in that -order. Moreover irq 12 is taken (e.g. by your PS/2 mouse). - - insmod specialix.o iobase=0x100,0x250,0x180 irq=9,11,15 - -The same three cards, but now in the kernel would require you to -add - - specialix=0x100,9,0x250,11,0x180,15 - -to the command line. This would become - - append="specialix=0x100,9,0x250,11,0x180,15" - -in your /etc/lilo.conf file if you use lilo. - -The Specialix driver is slightly odd: It allows you to have the second -or third card detected without having a first card. This has -advantages and disadvantages. A slot that isn't filled by an ISA card, -might be filled if a PCI card is detected. Thus if you have an ISA -card at 0x250 and a PCI card, you would get: - -sx0: specialix IO8+ Board at 0x100 not found. -sx1: specialix IO8+ Board at 0x180 not found. -sx2: specialix IO8+ board detected at 0x250, IRQ 12, CD1865 Rev. B. -sx3: specialix IO8+ Board at 0x260 not found. -sx0: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. - -This would happen if you don't give any probe hints to the driver. -If you would specify: - - specialix=0x250,11 - -you'd get the following messages: - -sx0: specialix IO8+ board detected at 0x250, IRQ 11, CD1865 Rev. B. -sx1: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. - -ISA probing is aborted after the IO address you gave is exhausted, and -the PCI card is now detected as the second card. The ISA card is now -also forced to IRQ11.... - - -Baud rates -========== - -The rev 1.2 and below boards use a CL-CD1864. These chips can only -do 64kbit. The rev 1.3 and newer boards use a CL-CD1865. These chips -are officially capable of 115k2. - -The Specialix card uses a 25MHz crystal (in times two mode, which in -fact is a divided by two mode). This is not enough to reach the rated -115k2 on all ports at the same time. With this clock rate you can only -do 37% of this rate. This means that at 115k2 on all ports you are -going to lose characters (The chip cannot handle that many incoming -bits at this clock rate.) (Yes, you read that correctly: there is a -limit to the number of -=bits=- per second that the chip can handle.) - -If you near the "limit" you will first start to see a graceful -degradation in that the chip cannot keep the transmitter busy at all -times. However with a central clock this slow, you can also get it to -miss incoming characters. The driver will print a warning message when -you are outside the official specs. The messages usually show up in -the file /var/log/messages . - -The specialix card cannot reliably do 115k2. If you use it, you have -to do "extensive testing" (*) to verify if it actually works. - -When "mgetty" communicates with my modem at 115k2 it reports: -got: +++[0d]ATQ0V1H0[0d][0d][8a]O[cb][0d][8a] - ^^^^ ^^^^ ^^^^ - -The three characters that have the "^^^" under them have suffered a -bit error in the highest bit. In conclusion: I've tested it, and found -that it simply DOESN'T work for me. I also suspect that this is also -caused by the baud rate being just a little bit out of tune. - -I upgraded the crystal to 66Mhz on one of my Specialix cards. Works -great! Contact me for details. (Voids warranty, requires a steady hand -and more such restrictions....) - - -(*) Cirrus logic CD1864 databook, page 40. - - -Cables for the Specialix IO8+ -============================= - -The pinout of the connectors on the IO8+ is: - - pin short direction long name - name - Pin 1 DCD input Data Carrier Detect - Pin 2 RXD input Receive - Pin 3 DTR/RTS output Data Terminal Ready/Ready To Send - Pin 4 GND - Ground - Pin 5 TXD output Transmit - Pin 6 CTS input Clear To Send - - - -- 6 5 4 3 2 1 -- - | | - | | - | | - | | - +----- -----+ - |__________| - clip - - Front view of an RJ12 connector. Cable moves "into" the paper. - (the plug is ready to plug into your mouth this way...) - - - NULL cable. I don't know who is going to use these except for - testing purposes, but I tested the cards with this cable. (It - took quite a while to figure out, so I'm not going to delete - it. So there! :-) - - - This end goes This end needs - straight into the some twists in - RJ12 plug. the wiring. - IO8+ RJ12 IO8+ RJ12 - 1 DCD white - - - - 1 DCD - 2 RXD black 5 TXD - 3 DTR/RTS red 6 CTS - 4 GND green 4 GND - 5 TXD yellow 2 RXD - 6 CTS blue 3 DTR/RTS - - - Same NULL cable, but now sorted on the second column. - - 1 DCD white - - - - 1 DCD - 5 TXD yellow 2 RXD - 6 CTS blue 3 DTR/RTS - 4 GND green 4 GND - 2 RXD black 5 TXD - 3 DTR/RTS red 6 CTS - - - - This is a modem cable usable for hardware handshaking: - RJ12 DB25 DB9 - 1 DCD white 8 DCD 1 DCD - 2 RXD black 3 RXD 2 RXD - 3 DTR/RTS red 4 RTS 7 RTS - 4 GND green 7 GND 5 GND - 5 TXD yellow 2 TXD 3 TXD - 6 CTS blue 5 CTS 8 CTS - +---- 6 DSR 6 DSR - +---- 20 DTR 4 DTR - - This is a modem cable usable for software handshaking: - It allows you to reset the modem using the DTR ioctls. - I (REW) have never tested this, "but xxxxxxxxxxxxx - says that it works." If you test this, please - tell me and I'll fill in your name on the xxx's. - - RJ12 DB25 DB9 - 1 DCD white 8 DCD 1 DCD - 2 RXD black 3 RXD 2 RXD - 3 DTR/RTS red 20 DTR 4 DTR - 4 GND green 7 GND 5 GND - 5 TXD yellow 2 TXD 3 TXD - 6 CTS blue 5 CTS 8 CTS - +---- 6 DSR 6 DSR - +---- 4 RTS 7 RTS - - I bought a 6 wire flat cable. It was colored as indicated. - Check that yours is the same before you trust me on this. - - -Hardware handshaking issues. -============================ - -The driver can be told to operate in two different ways. The default -behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when -hardware handshaking is off. It behaves as the RTS hardware -handshaking signal when hardware handshaking is selected. - -When you use this, you have to use the appropriate cable. The -cable will either be compatible with hardware handshaking or with -software handshaking. So switching on the fly is not really an -option. - -I actually prefer to use the "specialix.sx_rtscts=1" option. -This makes the DTR/RTS pin always an RTS pin, and ioctls to -change DTR are always ignored. I have a cable that is configured -for this. - - -Ports and devices -================= - -Port 0 is the one furthest from the card-edge connector. - -Devices: - -You should make the devices as follows: - -bash -cd /dev -for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 \ - 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -do - echo -n "$i " - mknod /dev/ttyW$i c 75 $i - mknod /dev/cuw$i c 76 $i -done -echo "" - -If your system doesn't come with these devices preinstalled, bug your -linux-vendor about this. They have had ample time to get this -implemented by now. - -You cannot have more than 4 boards in one computer. The card only -supports 4 different interrupts. If you really want this, contact me -about this and I'll give you a few tips (requires soldering iron).... - -If you have enough PCI slots, you can probably use more than 4 PCI -versions of the card though.... - -The PCI version of the card cannot adhere to the mechanical part of -the PCI spec because the 8 serial connectors are simply too large. If -it doesn't fit in your computer, bring back the card. - - ------------------------------------------------------------------------- - - - Fixed bugs and restrictions: - - During initialization, interrupts are blindly turned on. - Having a shadow variable would cause an extra memory - access on every IO instruction. - - The interrupt (on the card) should be disabled when we - don't allocate the Linux end of the interrupt. This allows - a different driver/card to use it while all ports are not in - use..... (a la standard serial port) - == An extra _off variant of the sx_in and sx_out macros are - now available. They don't set the interrupt enable bit. - These are used during initialization. Normal operation uses - the old variant which enables the interrupt line. - - RTS/DTR issue needs to be implemented according to - specialix' spec. - I kind of like the "determinism" of the current - implementation. Compile time flag? - == Ok. Compile time flag! Default is how Specialix likes it. - == Now a config time flag! Gets saved in your config file. Neat! - - Can you set the IO address from the lilo command line? - If you need this, bug me about it, I'll make it. - == Hah! No bugging needed. Fixed! :-) - - Cirrus logic hasn't gotten back to me yet why the CD1865 can - and the CD1864 can't do 115k2. I suspect that this is - because the CD1864 is not rated for 33MHz operation. - Therefore the CD1864 versions of the card can't do 115k2 on - all ports just like the CD1865 versions. The driver does - not block 115k2 on CD1864 cards. - == I called the Cirrus Logic representative here in Holland. - The CD1864 databook is identical to the CD1865 databook, - except for an extra warning at the end. Similar Bit errors - have been observed in testing at 115k2 on both an 1865 and - a 1864 chip. I see no reason why I would prohibit 115k2 on - 1864 chips and not do it on 1865 chips. Actually there is - reason to prohibit it on BOTH chips. I print a warning. - If you use 115k2, you're on your own. - - A spiky CD may send spurious HUPs. Also in CLOCAL??? - -- A fix for this turned out to be counter productive. - Different fix? Current behaviour is acceptable? - -- Maybe the current implementation is correct. If anybody - gets bitten by this, please report, and it will get fixed. - - -- Testing revealed that when in CLOCAL, the problem doesn't - occur. As warned for in the CD1865 manual, the chip may - send modem intr's on a spike. We could filter those out, - but that would be a cludge anyway (You'd still risk getting - a spurious HUP when two spikes occur.)..... - - - - Bugs & restrictions: - - This is a difficult card to autoprobe. - You have to WRITE to the address register to even - read-probe a CD186x register. Disable autodetection? - -- Specialix: any suggestions? - - diff --git a/Documentation/stallion.txt b/Documentation/stallion.txt deleted file mode 100644 index 5c4902d9a5be..000000000000 --- a/Documentation/stallion.txt +++ /dev/null @@ -1,392 +0,0 @@ -* NOTE - This is an unmaintained driver. Lantronix, which bought Stallion -technologies, is not active in driver maintenance, and they have no information -on when or if they will have a 2.6 driver. - -James Nelson - 12-12-2004 - -Stallion Multiport Serial Driver Readme ---------------------------------------- - -Copyright (C) 1994-1999, Stallion Technologies. - -Version: 5.5.1 -Date: 28MAR99 - - - -1. INTRODUCTION - -There are two drivers that work with the different families of Stallion -multiport serial boards. One is for the Stallion smart boards - that is -EasyIO, EasyConnection 8/32 and EasyConnection 8/64-PCI, the other for -the true Stallion intelligent multiport boards - EasyConnection 8/64 -(ISA, EISA, MCA), EasyConnection/RA-PCI, ONboard and Brumby. - -If you are using any of the Stallion intelligent multiport boards (Brumby, -ONboard, EasyConnection 8/64 (ISA, EISA, MCA), EasyConnection/RA-PCI) with -Linux you will need to get the driver utility package. This contains a -firmware loader and the firmware images necessary to make the devices operate. - -The Stallion Technologies ftp site, ftp.stallion.com, will always have -the latest version of the driver utility package. - -ftp://ftp.stallion.com/drivers/ata5/Linux/ata-linux-550.tar.gz - -As of the printing of this document the latest version of the driver -utility package is 5.5.0. If a later version is now available then you -should use the latest version. - -If you are using the EasyIO, EasyConnection 8/32 or EasyConnection 8/64-PCI -boards then you don't need this package, although it does have a serial stats -display program. - -If you require DIP switch settings, EISA or MCA configuration files, or any -other information related to Stallion boards then have a look at Stallion's -web pages at http://www.stallion.com. - - - -2. INSTALLATION - -The drivers can be used as loadable modules or compiled into the kernel. -You can choose which when doing a "config" on the kernel. - -All ISA, EISA and MCA boards that you want to use need to be configured into -the driver(s). All PCI boards will be automatically detected when you load -the driver - so they do not need to be entered into the driver(s) -configuration structure. Note that kernel PCI support is required to use PCI -boards. - -There are two methods of configuring ISA, EISA and MCA boards into the drivers. -If using the driver as a loadable module then the simplest method is to pass -the driver configuration as module arguments. The other method is to modify -the driver source to add configuration lines for each board in use. - -If you have pre-built Stallion driver modules then the module argument -configuration method should be used. A lot of Linux distributions come with -pre-built driver modules in /lib/modules/X.Y.Z/misc for the kernel in use. -That makes things pretty simple to get going. - - -2.1 MODULE DRIVER CONFIGURATION: - -The simplest configuration for modules is to use the module load arguments -to configure any ISA, EISA or MCA boards. PCI boards are automatically -detected, so do not need any additional configuration at all. - -If using EasyIO, EasyConnection 8/32 ISA or MCA, or EasyConnection 8/63-PCI -boards then use the "stallion" driver module, Otherwise if you are using -an EasyConnection 8/64 ISA, EISA or MCA, EasyConnection/RA-PCI, ONboard, -Brumby or original Stallion board then use the "istallion" driver module. - -Typically to load up the smart board driver use: - - modprobe stallion - -This will load the EasyIO and EasyConnection 8/32 driver. It will output a -message to say that it loaded and print the driver version number. It will -also print out whether it found the configured boards or not. These messages -may not appear on the console, but typically are always logged to -/var/adm/messages or /var/log/syslog files - depending on how the klogd and -syslogd daemons are setup on your system. - -To load the intelligent board driver use: - - modprobe istallion - -It will output similar messages to the smart board driver. - -If not using an auto-detectable board type (that is a PCI board) then you -will also need to supply command line arguments to the modprobe command -when loading the driver. The general form of the configuration argument is - - board?=[,[,][,]] - -where: - - board? -- specifies the arbitrary board number of this board, - can be in the range 0 to 3. - - name -- textual name of this board. The board name is the common - board name, or any "shortened" version of that. The board - type number may also be used here. - - ioaddr -- specifies the I/O address of this board. This argument is - optional, but should generally be specified. - - addr -- optional second address argument. Some board types require - a second I/O address, some require a memory address. The - exact meaning of this argument depends on the board type. - - irq -- optional IRQ line used by this board. - -Up to 4 board configuration arguments can be specified on the load line. -Here is some examples: - - modprobe stallion board0=easyio,0x2a0,5 - -This configures an EasyIO board as board 0 at I/O address 0x2a0 and IRQ 5. - - modprobe istallion board3=ec8/64,0x2c0,0xcc000 - -This configures an EasyConnection 8/64 ISA as board 3 at I/O address 0x2c0 at -memory address 0xcc000. - - modprobe stallion board1=ec8/32-at,0x2a0,0x280,10 - -This configures an EasyConnection 8/32 ISA board at primary I/O address 0x2a0, -secondary address 0x280 and IRQ 10. - -You will probably want to enter this module load and configuration information -into your system startup scripts so that the drivers are loaded and configured -on each system boot. Typically the start up script would be something like -/etc/modprobe.conf. - - -2.2 STATIC DRIVER CONFIGURATION: - -For static driver configuration you need to modify the driver source code. -Entering ISA, EISA and MCA boards into the driver(s) configuration structure -involves editing the driver(s) source file. It's pretty easy if you follow -the instructions below. Both drivers can support up to 4 boards. The smart -card driver (the stallion.c driver) supports any combination of EasyIO and -EasyConnection 8/32 boards (up to a total of 4). The intelligent driver -supports any combination of ONboards, Brumbys, Stallions and EasyConnection -8/64 (ISA and EISA) boards (up to a total of 4). - -To set up the driver(s) for the boards that you want to use you need to -edit the appropriate driver file and add configuration entries. - -If using EasyIO or EasyConnection 8/32 ISA or MCA boards, - In drivers/char/stallion.c: - - find the definition of the stl_brdconf array (of structures) - near the top of the file - - modify this to match the boards you are going to install - (the comments before this structure should help) - - save and exit - -If using ONboard, Brumby, Stallion or EasyConnection 8/64 (ISA or EISA) -boards, - In drivers/char/istallion.c: - - find the definition of the stli_brdconf array (of structures) - near the top of the file - - modify this to match the boards you are going to install - (the comments before this structure should help) - - save and exit - -Once you have set up the board configurations then you are ready to build -the kernel or modules. - -When the new kernel is booted, or the loadable module loaded then the -driver will emit some kernel trace messages about whether the configured -boards were detected or not. Depending on how your system logger is set -up these may come out on the console, or just be logged to -/var/adm/messages or /var/log/syslog. You should check the messages to -confirm that all is well. - - -2.3 SHARING INTERRUPTS - -It is possible to share interrupts between multiple EasyIO and -EasyConnection 8/32 boards in an EISA system. To do this you must be using -static driver configuration, modifying the driver source code to add driver -configuration. Then a couple of extra things are required: - -1. When entering the board resources into the stallion.c file you need to - mark the boards as using level triggered interrupts. Do this by replacing - the "0" entry at field position 6 (the last field) in the board - configuration structure with a "1". (This is the structure that defines - the board type, I/O locations, etc. for each board). All boards that are - sharing an interrupt must be set this way, and each board should have the - same interrupt number specified here as well. Now build the module or - kernel as you would normally. - -2. When physically installing the boards into the system you must enter - the system EISA configuration utility. You will need to install the EISA - configuration files for *all* the EasyIO and EasyConnection 8/32 boards - that are sharing interrupts. The Stallion EasyIO and EasyConnection 8/32 - EISA configuration files required are supplied by Stallion Technologies - on the EASY Utilities floppy diskette (usually supplied in the box with - the board when purchased. If not, you can pick it up from Stallion's FTP - site, ftp.stallion.com). You will need to edit the board resources to - choose level triggered interrupts, and make sure to set each board's - interrupt to the same IRQ number. - -You must complete both the above steps for this to work. When you reboot -or load the driver your EasyIO and EasyConnection 8/32 boards will be -sharing interrupts. - - -2.4 USING HIGH SHARED MEMORY - -The EasyConnection 8/64-EI, ONboard and Stallion boards are capable of -using shared memory addresses above the usual 640K - 1Mb range. The ONboard -ISA and the Stallion boards can be programmed to use memory addresses up to -16Mb (the ISA bus addressing limit), and the EasyConnection 8/64-EI and -ONboard/E can be programmed for memory addresses up to 4Gb (the EISA bus -addressing limit). - -The higher than 1Mb memory addresses are fully supported by this driver. -Just enter the address as you normally would for a lower than 1Mb address -(in the driver's board configuration structure). - - - -2.5 TROUBLE SHOOTING - -If a board is not found by the driver but is actually in the system then the -most likely problem is that the I/O address is wrong. Change the module load -argument for the loadable module form. Or change it in the driver stallion.c -or istallion.c configuration structure and rebuild the kernel or modules, or -change it on the board. - -On EasyIO and EasyConnection 8/32 boards the IRQ is software programmable, so -if there is a conflict you may need to change the IRQ used for a board. There -are no interrupts to worry about for ONboard, Brumby or EasyConnection 8/64 -(ISA, EISA and MCA) boards. The memory region on EasyConnection 8/64 and -ONboard boards is software programmable, but not on the Brumby boards. - - - -3. USING THE DRIVERS - -3.1 INTELLIGENT DRIVER OPERATION - -The intelligent boards also need to have their "firmware" code downloaded -to them. This is done via a user level application supplied in the driver -utility package called "stlload". Compile this program wherever you dropped -the package files, by typing "make". In its simplest form you can then type - - ./stlload -i cdk.sys - -in this directory and that will download board 0 (assuming board 0 is an -EasyConnection 8/64 or EasyConnection/RA board). To download to an -ONboard, Brumby or Stallion do: - - ./stlload -i 2681.sys - -Normally you would want all boards to be downloaded as part of the standard -system startup. To achieve this, add one of the lines above into the -/etc/rc.d/rc.S or /etc/rc.d/rc.serial file. To download each board just add -the "-b " option to the line. You will need to download code for -every board. You should probably move the stlload program into a system -directory, such as /usr/sbin. Also, the default location of the cdk.sys image -file in the stlload down-loader is /usr/lib/stallion. Create that directory -and put the cdk.sys and 2681.sys files in it. (It's a convenient place to put -them anyway). As an example your /etc/rc.d/rc.S file might have the -following lines added to it (if you had 3 boards): - - /usr/sbin/stlload -b 0 -i /usr/lib/stallion/cdk.sys - /usr/sbin/stlload -b 1 -i /usr/lib/stallion/2681.sys - /usr/sbin/stlload -b 2 -i /usr/lib/stallion/2681.sys - -The image files cdk.sys and 2681.sys are specific to the board types. The -cdk.sys will only function correctly on an EasyConnection 8/64 board. Similarly -the 2681.sys image fill only operate on ONboard, Brumby and Stallion boards. -If you load the wrong image file into a board it will fail to start up, and -of course the ports will not be operational! - -If you are using the modularized version of the driver you might want to put -the modprobe calls in the startup script as well (before the download lines -obviously). - - -3.2 USING THE SERIAL PORTS - -Once the driver is installed you will need to setup some device nodes to -access the serial ports. The simplest method is to use the /dev/MAKEDEV program. -It will automatically create device entries for Stallion boards. This will -create the normal serial port devices as /dev/ttyE# where# is the port number -starting from 0. A bank of 64 minor device numbers is allocated to each board, -so the first port on the second board is port 64,etc. A set of callout type -devices may also be created. They are created as the devices /dev/cue# where # -is the same as for the ttyE devices. - -For the most part the Stallion driver tries to emulate the standard PC system -COM ports and the standard Linux serial driver. The idea is that you should -be able to use Stallion board ports and COM ports interchangeably without -modifying anything but the device name. Anything that doesn't work like that -should be considered a bug in this driver! - -If you look at the driver code you will notice that it is fairly closely -based on the Linux serial driver (linux/drivers/char/serial.c). This is -intentional, obviously this is the easiest way to emulate its behavior! - -Since this driver tries to emulate the standard serial ports as much as -possible, most system utilities should work as they do for the standard -COM ports. Most importantly "stty" works as expected and "setserial" can -also be used (excepting the ability to auto-configure the I/O and IRQ -addresses of boards). Higher baud rates are supported in the usual fashion -through setserial or using the CBAUDEX extensions. Note that the EasyIO and -EasyConnection (all types) support at least 57600 and 115200 baud. The newer -EasyConnection XP modules and new EasyIO boards support 230400 and 460800 -baud as well. The older boards including ONboard and Brumby support a -maximum baud rate of 38400. - -If you are unfamiliar with how to use serial ports, then get the Serial-HOWTO -by Greg Hankins. It will explain everything you need to know! - - - -4. NOTES - -You can use both drivers at once if you have a mix of board types installed -in a system. However to do this you will need to change the major numbers -used by one of the drivers. Currently both drivers use major numbers 24, 25 -and 28 for their devices. Change one driver to use some other major numbers, -and then modify the mkdevnods script to make device nodes based on those new -major numbers. For example, you could change the istallion.c driver to use -major numbers 60, 61 and 62. You will also need to create device nodes with -different names for the ports, for example ttyF# and cuf#. - -The original Stallion board is no longer supported by Stallion Technologies. -Although it is known to work with the istallion driver. - -Finding a free physical memory address range can be a problem. The older -boards like the Stallion and ONboard need large areas (64K or even 128K), so -they can be very difficult to get into a system. If you have 16 Mb of RAM -then you have no choice but to put them somewhere in the 640K -> 1Mb range. -ONboards require 64K, so typically 0xd0000 is good, or 0xe0000 on some -systems. If you have an original Stallion board, "V4.0" or Rev.O, then you -need a 64K memory address space, so again 0xd0000 and 0xe0000 are good. -Older Stallion boards are a much bigger problem. They need 128K of address -space and must be on a 128K boundary. If you don't have a VGA card then -0xc0000 might be usable - there is really no other place you can put them -below 1Mb. - -Both the ONboard and old Stallion boards can use higher memory addresses as -well, but you must have less than 16Mb of RAM to be able to use them. Usual -high memory addresses used include 0xec0000 and 0xf00000. - -The Brumby boards only require 16Kb of address space, so you can usually -squeeze them in somewhere. Common addresses are 0xc8000, 0xcc000, or in -the 0xd0000 range. EasyConnection 8/64 boards are even better, they only -require 4Kb of address space, again usually 0xc8000, 0xcc000 or 0xd0000 -are good. - -If you are using an EasyConnection 8/64-EI or ONboard/E then usually the -0xd0000 or 0xe0000 ranges are the best options below 1Mb. If neither of -them can be used then the high memory support to use the really high address -ranges is the best option. Typically the 2Gb range is convenient for them, -and gets them well out of the way. - -The ports of the EasyIO-8M board do not have DCD or DTR signals. So these -ports cannot be used as real modem devices. Generally, when using these -ports you should only use the cueX devices. - -The driver utility package contains a couple of very useful programs. One -is a serial port statistics collection and display program - very handy -for solving serial port problems. The other is an extended option setting -program that works with the intelligent boards. - - - -5. DISCLAIMER - -The information contained in this document is believed to be accurate and -reliable. However, no responsibility is assumed by Stallion Technologies -Pty. Ltd. for its use, nor any infringements of patents or other rights -of third parties resulting from its use. Stallion Technologies reserves -the right to modify the design of its products and will endeavour to change -the information in manuals and accompanying documentation accordingly. - diff --git a/Documentation/sx.txt b/Documentation/sx.txt deleted file mode 100644 index cb4efa0fb5cc..000000000000 --- a/Documentation/sx.txt +++ /dev/null @@ -1,294 +0,0 @@ - - sx.txt -- specialix SX/SI multiport serial driver readme. - - - - Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - - Specialix pays for the development and support of this driver. - Please DO contact support@specialix.co.uk if you require - support. - - This driver was developed in the BitWizard linux device - driver service. If you require a linux device driver for your - product, please contact devices@BitWizard.nl for a quote. - - (History) - There used to be an SI driver by Simon Allan. This is a complete - rewrite from scratch. Just a few lines-of-code have been snatched. - - (Sources) - Specialix document number 6210028: SX Host Card and Download Code - Software Functional Specification. - - (Copying) - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of - the License, or (at your option) any later version. - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - USA. - - (Addendum) - I'd appreciate it that if you have fixes, that you send them - to me first. - - -Introduction -============ - -This file contains some random information, that I like to have online -instead of in a manual that can get lost. Ever misplace your Linux -kernel sources? And the manual of one of the boards in your computer? - - -Theory of operation -=================== - -An important thing to know is that the driver itself doesn't have the -firmware for the card. This means that you need the separate package -"sx_firmware". For now you can get the source at - - ftp://ftp.bitwizard.nl/specialix/sx_firmware_.tgz - -The firmware load needs a "misc" device, so you'll need to enable the -"Support for user misc device modules" in your kernel configuration. -The misc device needs to be called "/dev/specialix_sxctl". It needs -misc major 10, and minor number 167 (assigned by HPA). The section -on creating device files below also creates this device. - -After loading the sx.o module into your kernel, the driver will report -the number of cards detected, but because it doesn't have any -firmware, it will not be able to determine the number of ports. Only -when you then run "sx_firmware" will the firmware be downloaded and -the rest of the driver initialized. At that time the sx_firmware -program will report the number of ports installed. - -In contrast with many other multi port serial cards, some of the data -structures are only allocated when the card knows the number of ports -that are connected. This means we won't waste memory for 120 port -descriptor structures when you only have 8 ports. If you experience -problems due to this, please report them: I haven't seen any. - - -Interrupts -========== - -A multi port serial card, would generate a horrendous amount of -interrupts if it would interrupt the CPU for every received -character. Even more than 10 years ago, the trick not to use -interrupts but to poll the serial cards was invented. - -The SX card allow us to do this two ways. First the card limits its -own interrupt rate to a rate that won't overwhelm the CPU. Secondly, -we could forget about the cards interrupt completely and use the -internal timer for this purpose. - -Polling the card can take up to a few percent of your CPU. Using the -interrupts would be better if you have most of the ports idle. Using -timer-based polling is better if your card almost always has work to -do. You save the separate interrupt in that case. - -In any case, it doesn't really matter all that much. - -The most common problem with interrupts is that for ISA cards in a PCI -system the BIOS has to be told to configure that interrupt as "legacy -ISA". Otherwise the card can pull on the interrupt line all it wants -but the CPU won't see this. - -If you can't get the interrupt to work, remember that polling mode is -more efficient (provided you actually use the card intensively). - - -Allowed Configurations -====================== - -Some configurations are disallowed. Even though at a glance they might -seem to work, they are known to lockup the bus between the host card -and the device concentrators. You should respect the drivers decision -not to support certain configurations. It's there for a reason. - -Warning: Seriously technical stuff ahead. Executive summary: Don't use -SX cards except configured at a 64k boundary. Skip the next paragraph. - -The SX cards can theoretically be placed at a 32k boundary. So for -instance you can put an SX card at 0xc8000-0xd7fff. This is not a -"recommended configuration". ISA cards have to tell the bus controller -how they like their timing. Due to timing issues they have to do this -based on which 64k window the address falls into. This means that the -32k window below and above the SX card have to use exactly the same -timing as the SX card. That reportedly works for other SX cards. But -you're still left with two useless 32k windows that should not be used -by anybody else. - - -Configuring the driver -====================== - -PCI cards are always detected. The driver auto-probes for ISA cards at -some sensible addresses. Please report if the auto-probe causes trouble -in your system, or when a card isn't detected. - -I'm afraid I haven't implemented "kernel command line parameters" yet. -This means that if the default doesn't work for you, you shouldn't use -the compiled-into-the-kernel version of the driver. Use a module -instead. If you convince me that you need this, I'll make it for -you. Deal? - -I'm afraid that the module parameters are a bit clumsy. If you have a -better idea, please tell me. - -You can specify several parameters: - - sx_poll: number of jiffies between timer-based polls. - - Set this to "0" to disable timer based polls. - Initialization of cards without a working interrupt - will fail. - - Set this to "1" if you want a polling driver. - (on Intel: 100 polls per second). If you don't use - fast baud rates, you might consider a value like "5". - (If you don't know how to do the math, use 1). - - sx_slowpoll: Number of jiffies between timer-based polls. - Set this to "100" to poll once a second. - This should get the card out of a stall if the driver - ever misses an interrupt. I've never seen this happen, - and if it does, that's a bug. Tell me. - - sx_maxints: Number of interrupts to request from the card. - The card normally limits interrupts to about 100 per - second to offload the host CPU. You can increase this - number to reduce latency on the card a little. - Note that if you give a very high number you can overload - your CPU as well as the CPU on the host card. This setting - is inaccurate and not recommended for SI cards (But it - works). - - sx_irqmask: The mask of allowable IRQs to use. I suggest you set - this to 0 (disable IRQs all together) and use polling if - the assignment of IRQs becomes problematic. This is defined - as the sum of (1 << irq) 's that you want to allow. So - sx_irqmask of 8 (1 << 3) specifies that only irq 3 may - be used by the SX driver. If you want to specify to the - driver: "Either irq 11 or 12 is ok for you to use", then - specify (1 << 11) | (1 << 12) = 0x1800 . - - sx_debug: You can enable different sorts of debug traces with this. - At "-1" all debugging traces are active. You'll get several - times more debugging output than you'll get characters - transmitted. - - -Baud rates -========== - -Theoretically new SXDCs should be capable of more than 460k -baud. However the line drivers usually give up before that. Also the -CPU on the card may not be able to handle 8 channels going at full -blast at that speed. Moreover, the buffers are not large enough to -allow operation with 100 interrupts per second. You'll have to realize -that the card has a 256 byte buffer, so you'll have to increase the -number of interrupts per second if you have more than 256*100 bytes -per second to transmit. If you do any performance testing in this -area, I'd be glad to hear from you... - -(Psst Linux users..... I think the Linux driver is more efficient than -the driver for other OSes. If you can and want to benchmark them -against each other, be my guest, and report your findings...... :-) - - -Ports and devices -================= - -Port 0 is the top connector on the module closest to the host -card. Oh, the ports on the SXDCs and TAs are labelled from 1 to 8 -instead of from 0 to 7, as they are numbered by linux. I'm stubborn in -this: I know for sure that I wouldn't be able to calculate which port -is which anymore if I would change that.... - - -Devices: - -You should make the device files as follows: - -#!/bin/sh -# (I recommend that you cut-and-paste this into a file and run that) -cd /dev -t=0 -mknod specialix_sxctl c 10 167 -while [ $t -lt 64 ] - do - echo -n "$t " - mknod ttyX$t c 32 $t - mknod cux$t c 33 $t - t=`expr $t + 1` -done -echo "" -rm /etc/psdevtab -ps > /dev/null - - -This creates 64 devices. If you have more, increase the constant on -the line with "while". The devices start at 0, as is customary on -Linux. Specialix seems to like starting the numbering at 1. - -If your system doesn't come with these devices pre-installed, bug your -linux-vendor about this. They should have these devices -"pre-installed" before the new millennium. The "ps" stuff at the end -is to "tell" ps that the new devices exist. - -Officially the maximum number of cards per computer is 4. This driver -however supports as many cards in one machine as you want. You'll run -out of interrupts after a few, but you can switch to polled operation -then. At about 256 ports (More than 8 cards), we run out of minor -device numbers. Sorry. I suggest you buy a second computer.... (Or -switch to RIO). - ------------------------------------------------------------------------- - - - Fixed bugs and restrictions: - - Hangup processing. - -- Done. - - - the write path in generic_serial (lockup / oops). - -- Done (Ugly: not the way I want it. Copied from serial.c). - - - write buffer isn't flushed at close. - -- Done. I still seem to lose a few chars at close. - Sorry. I think that this is a firmware issue. (-> Specialix) - - - drain hardware before changing termios - - Change debug on the fly. - - ISA free irq -1. (no firmware loaded). - - adding c8000 as a probe address. Added warning. - - Add a RAMtest for the RAM on the card.c - - Crash when opening a port "way" of the number of allowed ports. - (for example opening port 60 when there are only 24 ports attached) - - Sometimes the use-count strays a bit. After a few hours of - testing the use count is sometimes "3". If you are not like - me and can remember what you did to get it that way, I'd - appreciate an Email. Possibly fixed. Tell me if anyone still - sees this. - - TAs don't work right if you don't connect all the modem control - signals. SXDCs do. T225 firmware problem -> Specialix. - (Mostly fixed now, I think. Tell me if you encounter this!) - - Bugs & restrictions: - - - Arbitrary baud rates. Requires firmware update. (-> Specialix) - - - Low latency (mostly firmware, -> Specialix) - - - diff --git a/Documentation/tty.txt b/Documentation/tty.txt deleted file mode 100644 index 8e65c4498c52..000000000000 --- a/Documentation/tty.txt +++ /dev/null @@ -1,292 +0,0 @@ - - The Lockronomicon - -Your guide to the ancient and twisted locking policies of the tty layer and -the warped logic behind them. Beware all ye who read on. - -FIXME: still need to work out the full set of BKL assumptions and document -them so they can eventually be killed off. - - -Line Discipline ---------------- - -Line disciplines are registered with tty_register_ldisc() passing the -discipline number and the ldisc structure. At the point of registration the -discipline must be ready to use and it is possible it will get used before -the call returns success. If the call returns an error then it won't get -called. Do not re-use ldisc numbers as they are part of the userspace ABI -and writing over an existing ldisc will cause demons to eat your computer. -After the return the ldisc data has been copied so you may free your own -copy of the structure. You must not re-register over the top of the line -discipline even with the same data or your computer again will be eaten by -demons. - -In order to remove a line discipline call tty_unregister_ldisc(). -In ancient times this always worked. In modern times the function will -return -EBUSY if the ldisc is currently in use. Since the ldisc referencing -code manages the module counts this should not usually be a concern. - -Heed this warning: the reference count field of the registered copies of the -tty_ldisc structure in the ldisc table counts the number of lines using this -discipline. The reference count of the tty_ldisc structure within a tty -counts the number of active users of the ldisc at this instant. In effect it -counts the number of threads of execution within an ldisc method (plus those -about to enter and exit although this detail matters not). - -Line Discipline Methods ------------------------ - -TTY side interfaces: - -open() - Called when the line discipline is attached to - the terminal. No other call into the line - discipline for this tty will occur until it - completes successfully. Can sleep. - -close() - This is called on a terminal when the line - discipline is being unplugged. At the point of - execution no further users will enter the - ldisc code for this tty. Can sleep. - -hangup() - Called when the tty line is hung up. - The line discipline should cease I/O to the tty. - No further calls into the ldisc code will occur. - Can sleep. - -write() - A process is writing data through the line - discipline. Multiple write calls are serialized - by the tty layer for the ldisc. May sleep. - -flush_buffer() - (optional) May be called at any point between - open and close, and instructs the line discipline - to empty its input buffer. - -chars_in_buffer() - (optional) Report the number of bytes in the input - buffer. - -set_termios() - (optional) Called on termios structure changes. - The caller passes the old termios data and the - current data is in the tty. Called under the - termios semaphore so allowed to sleep. Serialized - against itself only. - -read() - Move data from the line discipline to the user. - Multiple read calls may occur in parallel and the - ldisc must deal with serialization issues. May - sleep. - -poll() - Check the status for the poll/select calls. Multiple - poll calls may occur in parallel. May sleep. - -ioctl() - Called when an ioctl is handed to the tty layer - that might be for the ldisc. Multiple ioctl calls - may occur in parallel. May sleep. - -Driver Side Interfaces: - -receive_buf() - Hand buffers of bytes from the driver to the ldisc - for processing. Semantics currently rather - mysterious 8( - -write_wakeup() - May be called at any point between open and close. - The TTY_DO_WRITE_WAKEUP flag indicates if a call - is needed but always races versus calls. Thus the - ldisc must be careful about setting order and to - handle unexpected calls. Must not sleep. - - The driver is forbidden from calling this directly - from the ->write call from the ldisc as the ldisc - is permitted to call the driver write method from - this function. In such a situation defer it. - - -Driver Access - -Line discipline methods can call the following methods of the underlying -hardware driver through the function pointers within the tty->driver -structure: - -write() Write a block of characters to the tty device. - Returns the number of characters accepted. The - character buffer passed to this method is already - in kernel space. - -put_char() Queues a character for writing to the tty device. - If there is no room in the queue, the character is - ignored. - -flush_chars() (Optional) If defined, must be called after - queueing characters with put_char() in order to - start transmission. - -write_room() Returns the numbers of characters the tty driver - will accept for queueing to be written. - -ioctl() Invoke device specific ioctl. - Expects data pointers to refer to userspace. - Returns ENOIOCTLCMD for unrecognized ioctl numbers. - -set_termios() Notify the tty driver that the device's termios - settings have changed. New settings are in - tty->termios. Previous settings should be passed in - the "old" argument. - - The API is defined such that the driver should return - the actual modes selected. This means that the - driver function is responsible for modifying any - bits in the request it cannot fulfill to indicate - the actual modes being used. A device with no - hardware capability for change (eg a USB dongle or - virtual port) can provide NULL for this method. - -throttle() Notify the tty driver that input buffers for the - line discipline are close to full, and it should - somehow signal that no more characters should be - sent to the tty. - -unthrottle() Notify the tty driver that characters can now be - sent to the tty without fear of overrunning the - input buffers of the line disciplines. - -stop() Ask the tty driver to stop outputting characters - to the tty device. - -start() Ask the tty driver to resume sending characters - to the tty device. - -hangup() Ask the tty driver to hang up the tty device. - -break_ctl() (Optional) Ask the tty driver to turn on or off - BREAK status on the RS-232 port. If state is -1, - then the BREAK status should be turned on; if - state is 0, then BREAK should be turned off. - If this routine is not implemented, use ioctls - TIOCSBRK / TIOCCBRK instead. - -wait_until_sent() Waits until the device has written out all of the - characters in its transmitter FIFO. - -send_xchar() Send a high-priority XON/XOFF character to the device. - - -Flags - -Line discipline methods have access to tty->flags field containing the -following interesting flags: - -TTY_THROTTLED Driver input is throttled. The ldisc should call - tty->driver->unthrottle() in order to resume - reception when it is ready to process more data. - -TTY_DO_WRITE_WAKEUP If set, causes the driver to call the ldisc's - write_wakeup() method in order to resume - transmission when it can accept more data - to transmit. - -TTY_IO_ERROR If set, causes all subsequent userspace read/write - calls on the tty to fail, returning -EIO. - -TTY_OTHER_CLOSED Device is a pty and the other side has closed. - -TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into - smaller chunks. - - -Locking - -Callers to the line discipline functions from the tty layer are required to -take line discipline locks. The same is true of calls from the driver side -but not yet enforced. - -Three calls are now provided - - ldisc = tty_ldisc_ref(tty); - -takes a handle to the line discipline in the tty and returns it. If no ldisc -is currently attached or the ldisc is being closed and re-opened at this -point then NULL is returned. While this handle is held the ldisc will not -change or go away. - - tty_ldisc_deref(ldisc) - -Returns the ldisc reference and allows the ldisc to be closed. Returning the -reference takes away your right to call the ldisc functions until you take -a new reference. - - ldisc = tty_ldisc_ref_wait(tty); - -Performs the same function as tty_ldisc_ref except that it will wait for an -ldisc change to complete and then return a reference to the new ldisc. - -While these functions are slightly slower than the old code they should have -minimal impact as most receive logic uses the flip buffers and they only -need to take a reference when they push bits up through the driver. - -A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc -functions are called with the ldisc unavailable. Thus tty_ldisc_ref will -fail in this situation if used within these functions. Ldisc and driver -code calling its own functions must be careful in this case. - - -Driver Interface ----------------- - -open() - Called when a device is opened. May sleep - -close() - Called when a device is closed. At the point of - return from this call the driver must make no - further ldisc calls of any kind. May sleep - -write() - Called to write bytes to the device. May not - sleep. May occur in parallel in special cases. - Because this includes panic paths drivers generally - shouldn't try and do clever locking here. - -put_char() - Stuff a single character onto the queue. The - driver is guaranteed following up calls to - flush_chars. - -flush_chars() - Ask the kernel to write put_char queue - -write_room() - Return the number of characters tht can be stuffed - into the port buffers without overflow (or less). - The ldisc is responsible for being intelligent - about multi-threading of write_room/write calls - -ioctl() - Called when an ioctl may be for the driver - -set_termios() - Called on termios change, serialized against - itself by a semaphore. May sleep. - -set_ldisc() - Notifier for discipline change. At the point this - is done the discipline is not yet usable. Can now - sleep (I think) - -throttle() - Called by the ldisc to ask the driver to do flow - control. Serialization including with unthrottle - is the job of the ldisc layer. - -unthrottle() - Called by the ldisc to ask the driver to stop flow - control. - -stop() - Ldisc notifier to the driver to stop output. As with - throttle the serializations with start() are down - to the ldisc layer. - -start() - Ldisc notifier to the driver to start output. - -hangup() - Ask the tty driver to cause a hangup initiated - from the host side. [Can sleep ??] - -break_ctl() - Send RS232 break. Can sleep. Can get called in - parallel, driver must serialize (for now), and - with write calls. - -wait_until_sent() - Wait for characters to exit the hardware queue - of the driver. Can sleep - -send_xchar() - Send XON/XOFF and if possible jump the queue with - it in order to get fast flow control responses. - Cannot sleep ?? - diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 61ad8d639ba3..0344a8a8321d 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -21,7 +21,8 @@ config BLK_DEV_FD ---help--- If you want to use the floppy disk drive(s) of your PC under Linux, say Y. Information about this driver, especially important for IBM - Thinkpad users, is contained in . + Thinkpad users, is contained in + . That file also contains the location of the Floppy driver FAQ as well as location of the fdutils package used to configure additional parameters of the driver at run time. @@ -76,7 +77,7 @@ config PARIDE your computer's parallel port. Most of them are actually IDE devices using a parallel port IDE adapter. This option enables the PARIDE subsystem which contains drivers for many of these external drives. - Read for more information. + Read for more information. If you have said Y to the "Parallel-port support" configuration option, you may share a single port between your printer and other @@ -114,9 +115,9 @@ config BLK_CPQ_DA help This is the driver for Compaq Smart Array controllers. Everyone using these boards should say Y here. See the file - for the current list of boards - supported by this driver, and for further information on the use of - this driver. + for the current list of + boards supported by this driver, and for further information on the + use of this driver. config BLK_CPQ_CISS_DA tristate "Compaq Smart Array 5xxx support" @@ -124,7 +125,7 @@ config BLK_CPQ_CISS_DA help This is the driver for Compaq Smart Array 5xxx controllers. Everyone using these boards should say Y here. - See for the current list of + See for the current list of boards supported by this driver, and for further information on the use of this driver. @@ -135,7 +136,7 @@ config CISS_SCSI_TAPE help When enabled (Y), this option allows SCSI tape drives and SCSI medium changers (tape robots) to be accessed via a Compaq 5xxx array - controller. (See for more details.) + controller. (See for more details.) "SCSI support" and "SCSI tape support" must also be enabled for this option to work. @@ -149,8 +150,8 @@ config BLK_DEV_DAC960 help This driver adds support for the Mylex DAC960, AcceleRAID, and eXtremeRAID PCI RAID controllers. See the file - for further information about - this driver. + for further information + about this driver. To compile this driver as a module, choose M here: the module will be called DAC960. @@ -278,9 +279,9 @@ config BLK_DEV_NBD userland (making server and client physically the same computer, communicating using the loopback network device). - Read for more information, especially - about where to find the server code, which runs in user space and - does not need special kernel support. + Read for more information, + especially about where to find the server code, which runs in user + space and does not need special kernel support. Note that this has nothing to do with the network file systems NFS or Coda; you can say N here even if you intend to use NFS or Coda. @@ -321,8 +322,8 @@ config BLK_DEV_RAM store a copy of a minimal root file system off of a floppy into RAM during the initial install of Linux. - Note that the kernel command line option "ramdisk=XX" is now - obsolete. For details, read . + Note that the kernel command line option "ramdisk=XX" is now obsolete. + For details, read . To compile this driver as a module, choose M here: the module will be called rd. diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 14db747a636e..cf29cc4e6ab7 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4124,7 +4124,7 @@ static int __init floppy_setup(char *str) printk("\n"); } else DPRINT("botched floppy option\n"); - DPRINT("Read Documentation/floppy.txt\n"); + DPRINT("Read Documentation/blockdev/floppy.txt\n"); return 0; } diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 43b35d0369d6..43d6ba83a191 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -124,7 +124,7 @@ config COMPUTONE which give you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, say - Y here and read . + Y here and read . To compile this driver as module, choose M here: the module will be called ip2. @@ -136,7 +136,7 @@ config ROCKETPORT This driver supports Comtrol RocketPort and RocketModem PCI boards. These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or modems. For information about the RocketPort/RocketModem boards - and this driver read . + and this driver read . To compile this driver as a module, choose M here: the module will be called rocket. @@ -154,7 +154,7 @@ config CYCLADES your Linux box, for instance in order to become a dial-in server. For information about the Cyclades-Z card, read - . + . To compile this driver as a module, choose M here: the module will be called cyclades. @@ -183,7 +183,7 @@ config DIGIEPCA box, for instance in order to become a dial-in server. This driver supports the original PC (ISA) boards as well as PCI, and EISA. If you have a card like this, say Y here and read the file - . + . To compile this driver as a module, choose M here: the module will be called epca. @@ -289,7 +289,7 @@ config RISCOM8 which gives you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, - say Y here and read the file . + say Y here and read the file . Also it's possible to say M here and compile this driver as kernel loadable module; the module will be called riscom8. @@ -304,8 +304,8 @@ config SPECIALIX your Linux box, for instance in order to become a dial-in server. If you have a card like that, say Y here and read the file - . Also it's possible to say M here - and compile this driver as kernel loadable module which will be + . Also it's possible to say + M here and compile this driver as kernel loadable module which will be called specialix. config SX @@ -313,7 +313,7 @@ config SX depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) help This is a driver for the SX and SI multiport serial cards. - Please read the file for details. + Please read the file for details. This driver can only be built as a module ( = code which can be inserted in and removed from the running kernel whenever you want). @@ -344,8 +344,8 @@ config STALDRV like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you say Y here, you will be asked for your specific card model in the next - questions. Make sure to read in - this case. If you have never heard about all this, it's safe to + questions. Make sure to read + in this case. If you have never heard about all this, it's safe to say N. config STALLION @@ -354,7 +354,7 @@ config STALLION help If you have an EasyIO or EasyConnection 8/32 multiport Stallion card, then this is for you; say Y. Make sure to read - . + . To compile this driver as a module, choose M here: the module will be called stallion. @@ -365,7 +365,7 @@ config ISTALLION help If you have an EasyConnection 8/64, ONboard, Brumby or Stallion serial multiport card, say Y here. Make sure to read - . + . To compile this driver as a module, choose M here: the module will be called istallion. diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 242fd46fda22..a16b94f12eb2 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -72,7 +72,7 @@ /* * There is a bunch of documentation about the card, jumpers, config * settings, restrictions, cables, device names and numbers in - * Documentation/specialix.txt + * Documentation/serial/specialix.txt */ #include -- cgit v1.2.3 From c8d698849e135780738c2cb08f07f06eda982a8c Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 14 Nov 2008 11:10:55 -0700 Subject: powerpc/virtex: Update defconfigs Update defconfigs for running on Xilinx Virtex platforms Signed-off-by: Grant Likely --- arch/powerpc/configs/40x/virtex_defconfig | 1176 ++++++++++++++++++++++++++++ arch/powerpc/configs/44x/virtex5_defconfig | 234 +++--- arch/powerpc/configs/ppc40x_defconfig | 92 ++- arch/powerpc/configs/ppc44x_defconfig | 92 ++- 4 files changed, 1469 insertions(+), 125 deletions(-) create mode 100644 arch/powerpc/configs/40x/virtex_defconfig diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig new file mode 100644 index 000000000000..9a9350ded292 --- /dev/null +++ b/arch/powerpc/configs/40x/virtex_defconfig @@ -0,0 +1,1176 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28-rc4 +# Fri Nov 14 10:49:16 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_4xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +# CONFIG_PPC4xx_PCI_EXPRESS is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC4xx_GPIO is not set +CONFIG_XILINX_VIRTEX=y +# CONFIG_ACADIA is not set +# CONFIG_EP405 is not set +# CONFIG_HCU4 is not set +# CONFIG_KILAUEA is not set +# CONFIG_MAKALU is not set +# CONFIG_WALNUT is not set +CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y +# CONFIG_PPC40x_SIMPLE is not set +CONFIG_XILINX_VIRTEX_II_PRO=y +CONFIG_XILINX_VIRTEX_4_FX=y +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_RESOURCES_64BIT=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XILINX_SYSACE=y +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_XILINX_XPS_PS2=y +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +CONFIG_XILINX_HWICAP=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_XILINX=y + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_IBM_GXT4500 is not set +CONFIG_FB_XILINX=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig index 663ec512b33b..7513d360e0b0 100644 --- a/arch/powerpc/configs/44x/virtex5_defconfig +++ b/arch/powerpc/configs/44x/virtex5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 09:20:16 2008 +# Linux kernel version: 2.6.28-rc4 +# Fri Nov 14 10:31:16 2008 # # CONFIG_PPC64 is not set @@ -22,14 +22,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -40,6 +39,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -93,8 +93,8 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -109,7 +109,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -122,10 +124,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +156,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -174,9 +173,13 @@ CONFIG_CLASSIC_RCU=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y +# CONFIG_PPC44x_SIMPLE is not set +# CONFIG_PPC4xx_GPIO is not set CONFIG_XILINX_VIRTEX=y CONFIG_XILINX_VIRTEX_5_FXT=y # CONFIG_IPIC is not set @@ -196,7 +199,6 @@ CONFIG_XILINX_VIRTEX_5_FXT=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -211,6 +213,8 @@ CONFIG_HZ=250 CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -225,15 +229,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -256,6 +260,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -317,7 +322,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -352,8 +356,8 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set @@ -361,36 +365,38 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set # CONFIG_IP_NF_TARGET_LOG is not set @@ -411,6 +417,7 @@ CONFIG_IP_NF_MANGLE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -431,11 +438,10 @@ CONFIG_IP_NF_MANGLE=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -455,11 +461,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y +CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -478,7 +486,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_XILINX_SYSACE is not set +CONFIG_XILINX_SYSACE=y # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set @@ -487,6 +495,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -534,8 +543,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -556,6 +569,7 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -604,6 +618,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -611,9 +626,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -624,11 +641,11 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set +CONFIG_SERIO_XILINX_XPS_PS2=y # CONFIG_GAMEPORT is not set # @@ -656,11 +673,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # -# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -674,87 +692,41 @@ CONFIG_XILINX_HWICAP=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y # -# I2C system bus drivers (mostly embedded / system-on-chip) +# Memory mapped GPIO expanders: # -# CONFIG_I2C_IBM_IIC is not set -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set +CONFIG_GPIO_XILINX=y # -# External I2C/SMBus adapter drivers +# I2C GPIO expanders: # -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set # -# Graphics adapter I2C/DDC channel drivers +# PCI GPIO expanders: # -# CONFIG_I2C_VOODOO3 is not set +# CONFIG_GPIO_BT8XX is not set # -# Other I2C/SMBus bus drivers +# SPI GPIO expanders: # -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -CONFIG_I2C_DEBUG_CORE=y -CONFIG_I2C_DEBUG_ALGO=y -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -763,6 +735,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -790,6 +764,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -826,6 +801,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -838,6 +814,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_IBM_GXT4500 is not set CONFIG_FB_XILINX=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -870,6 +848,7 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -879,6 +858,8 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -887,10 +868,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -899,7 +881,7 @@ CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -923,6 +905,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -954,19 +937,15 @@ CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=y -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1023,7 +1002,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1041,7 +1019,7 @@ CONFIG_HAVE_LMB=y # # Kernel hacking # -# CONFIG_PRINTK_TIME is not set +CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 @@ -1049,19 +1027,62 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1069,12 +1090,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1147,6 +1170,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index c15c91deb2ab..4256e2c4534b 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:56:44 2008 +# Linux kernel version: 2.6.28-rc4 +# Fri Nov 14 09:54:44 2008 # # CONFIG_PPC64 is not set @@ -500,15 +500,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_XILINX_SYSACE is not set +CONFIG_XILINX_SYSACE=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -632,7 +634,13 @@ CONFIG_NETDEV_10000=y # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=m +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_XILINX_XPS_PS2=m # CONFIG_GAMEPORT is not set # @@ -660,7 +668,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # # Non-8250 serial port support # -# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -756,6 +765,11 @@ CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_XILINX=y + # # I2C GPIO expanders: # @@ -776,11 +790,11 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -792,6 +806,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -816,13 +831,65 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set +CONFIG_FB=m +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_IBM_GXT4500 is not set +CONFIG_FB_XILINX=m +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -851,6 +918,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1077,10 +1145,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 55edbd545b61..cfc94cfcf4cb 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:28:58 2008 +# Linux kernel version: 2.6.28-rc4 +# Fri Nov 14 10:06:19 2008 # # CONFIG_PPC64 is not set @@ -506,15 +506,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_XILINX_SYSACE is not set +CONFIG_XILINX_SYSACE=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -680,7 +682,13 @@ CONFIG_NETDEV_10000=y # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=m +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_XILINX_XPS_PS2=m # CONFIG_GAMEPORT is not set # @@ -708,7 +716,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # # Non-8250 serial port support # -# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -805,6 +814,11 @@ CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_XILINX=y + # # I2C GPIO expanders: # @@ -826,11 +840,11 @@ CONFIG_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -842,6 +856,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -866,13 +881,65 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=m +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_IBM_GXT4500 is not set +CONFIG_FB_XILINX=m +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -1002,6 +1069,7 @@ CONFIG_USB_STORAGE=m # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1227,10 +1295,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set -- cgit v1.2.3 From 4ff429e658c00bcf5101eabbebd4f711572a64cb Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Nov 2008 13:05:17 -0800 Subject: 9p: restrict RDMA usage linux-next: Make 9p's RDMA option depend on INET since it uses Infiniband rdma_* functions and that code depends on INET. Otherwise 9p can try to use symbols which don't exist. ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined! I used an if/endif block so that the menu items would remain presented together. Also correct an article adjective. Signed-off-by: Randy Dunlap Signed-off-by: Eric Van Hensbergen --- net/9p/Kconfig | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/9p/Kconfig b/net/9p/Kconfig index c42c0c400bf9..0663f99e977a 100644 --- a/net/9p/Kconfig +++ b/net/9p/Kconfig @@ -13,22 +13,24 @@ menuconfig NET_9P If unsure, say N. +if NET_9P + config NET_9P_VIRTIO - depends on NET_9P && EXPERIMENTAL && VIRTIO + depends on EXPERIMENTAL && VIRTIO tristate "9P Virtio Transport (Experimental)" help This builds support for a transports between guest partitions and a host partition. config NET_9P_RDMA - depends on NET_9P && INFINIBAND && EXPERIMENTAL + depends on INET && INFINIBAND && EXPERIMENTAL tristate "9P RDMA Transport (Experimental)" help - This builds support for a RDMA transport. + This builds support for an RDMA transport. config NET_9P_DEBUG bool "Debug information" - depends on NET_9P help Say Y if you want the 9P subsystem to log debug information. +endif -- cgit v1.2.3 From e3e081e1d5c4791f4416ed57b7a2f143ab9e5b09 Mon Sep 17 00:00:00 2001 From: Santwona Behera Date: Fri, 14 Nov 2008 14:44:08 -0800 Subject: NIU: Add Sun CP3260 ATCA blade support This patch adds support for the Sun CP3260 ATCA blade which is a N2 based ATCA blade with 2 NIU ports. The NIU ports do not have on-board PHY. Signed-off-by: Santwona Behera Signed-off-by: David S. Miller --- drivers/net/niu.c | 286 ++++++++++++++++++++++++++++++++++++++++++++++++++++-- drivers/net/niu.h | 13 +++ 2 files changed, 293 insertions(+), 6 deletions(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index d8463b1c3df3..be6b4d7e2bb4 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -406,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val) } /* Mode is always 10G fiber. */ -static int serdes_init_niu(struct niu *np) +static int serdes_init_niu_10g_fiber(struct niu *np) { struct niu_link_config *lp = &np->link_config; u32 tx_cfg, rx_cfg; @@ -443,6 +443,223 @@ static int serdes_init_niu(struct niu *np) return 0; } +static int serdes_init_niu_1g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u16 pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + u32 tx_cfg, rx_cfg; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV | + PLL_TX_CFG_RATE_HALF); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_RATE_HALF); + + if (np->port == 0) + rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE; + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 1G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + switch (np->port) { + case 0: + val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0); + mask = val; + break; + + case 1: + val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1); + mask = val; + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + dev_err(np->device, PFX "Port %u signal bits [%08x] are not " + "[%08x]\n", np->port, (int) (sig & mask), (int) val); + return -ENODEV; + } + + return 0; +} + +static int serdes_init_niu_10g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u32 tx_cfg, rx_cfg, pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_EQ_LP_ADAPTIVE); + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 10G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + /* check if serdes is ready */ + + switch (np->port) { + case 0: + mask = ESR_INT_SIGNALS_P0_BITS; + val = (ESR_INT_SRDY0_P0 | + ESR_INT_DET0_P0 | + ESR_INT_XSRDY_P0 | + ESR_INT_XDP_P0_CH3 | + ESR_INT_XDP_P0_CH2 | + ESR_INT_XDP_P0_CH1 | + ESR_INT_XDP_P0_CH0); + break; + + case 1: + mask = ESR_INT_SIGNALS_P1_BITS; + val = (ESR_INT_SRDY0_P1 | + ESR_INT_DET0_P1 | + ESR_INT_XSRDY_P1 | + ESR_INT_XDP_P1_CH3 | + ESR_INT_XDP_P1_CH2 | + ESR_INT_XDP_P1_CH1 | + ESR_INT_XDP_P1_CH0); + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + pr_info(PFX "NIU Port %u signal bits [%08x] are not " + "[%08x] for 10G...trying 1G\n", + np->port, (int) (sig & mask), (int) val); + + /* 10G failed, try initializing at 1G */ + err = serdes_init_niu_1g_serdes(np); + if (!err) { + np->flags &= ~NIU_FLAGS_10G; + np->mac_xcvr = MAC_XCVR_PCS; + } else { + dev_err(np->device, PFX "Port %u 10G/1G SERDES " + "Link Failed \n", np->port); + return -ENODEV; + } + } + return 0; +} + static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val) { int err; @@ -1954,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = { .link_status = link_status_10g_serdes, }; +static const struct niu_phy_ops phy_ops_10g_serdes_niu = { + .serdes_init = serdes_init_niu_10g_serdes, + .link_status = link_status_10g_serdes, +}; + +static const struct niu_phy_ops phy_ops_1g_serdes_niu = { + .serdes_init = serdes_init_niu_1g_serdes, + .link_status = link_status_1g_serdes, +}; + static const struct niu_phy_ops phy_ops_1g_rgmii = { .xcvr_init = xcvr_init_1g_rgmii, .link_status = link_status_1g_rgmii, }; static const struct niu_phy_ops phy_ops_10g_fiber_niu = { - .serdes_init = serdes_init_niu, + .serdes_init = serdes_init_niu_10g_fiber, .xcvr_init = xcvr_init_10g, .link_status = link_status_10g, }; @@ -1998,11 +2225,21 @@ struct niu_phy_template { u32 phy_addr_base; }; -static const struct niu_phy_template phy_template_niu = { +static const struct niu_phy_template phy_template_niu_10g_fiber = { .ops = &phy_ops_10g_fiber_niu, .phy_addr_base = 16, }; +static const struct niu_phy_template phy_template_niu_10g_serdes = { + .ops = &phy_ops_10g_serdes_niu, + .phy_addr_base = 0, +}; + +static const struct niu_phy_template phy_template_niu_1g_serdes = { + .ops = &phy_ops_1g_serdes_niu, + .phy_addr_base = 0, +}; + static const struct niu_phy_template phy_template_10g_fiber = { .ops = &phy_ops_10g_fiber, .phy_addr_base = 8, @@ -2182,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np) u32 phy_addr_off = 0; if (plat_type == PLAT_TYPE_NIU) { - tp = &phy_template_niu; - phy_addr_off += np->port; + switch (np->flags & + (NIU_FLAGS_10G | + NIU_FLAGS_FIBER | + NIU_FLAGS_XCVR_SERDES)) { + case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES: + /* 10G Serdes */ + tp = &phy_template_niu_10g_serdes; + break; + case NIU_FLAGS_XCVR_SERDES: + /* 1G Serdes */ + tp = &phy_template_niu_1g_serdes; + break; + case NIU_FLAGS_10G | NIU_FLAGS_FIBER: + /* 10G Fiber */ + default: + tp = &phy_template_niu_10g_fiber; + phy_addr_off += np->port; + break; + } } else { switch (np->flags & (NIU_FLAGS_10G | @@ -7213,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np, np->flags |= NIU_FLAGS_10G; np->flags &= ~NIU_FLAGS_FIBER; np->mac_xcvr = MAC_XCVR_XPCS; + } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) { + /* 10G Serdes or 1G Serdes, default to 10G */ + np->flags |= NIU_FLAGS_10G; + np->flags &= ~NIU_FLAGS_FIBER; + np->flags |= NIU_FLAGS_XCVR_SERDES; + np->mac_xcvr = MAC_XCVR_XPCS; } else { return -EINVAL; } @@ -7741,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) u32 val; int err; + num_10g = num_1g = 0; + if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) || !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) { num_10g = 0; @@ -7757,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) parent->num_ports = 2; val = (phy_encode(PORT_TYPE_10G, 0) | phy_encode(PORT_TYPE_10G, 1)); + } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) && + (parent->plat_type == PLAT_TYPE_NIU)) { + /* this is the Monza case */ + if (np->flags & NIU_FLAGS_10G) { + val = (phy_encode(PORT_TYPE_10G, 0) | + phy_encode(PORT_TYPE_10G, 1)); + } else { + val = (phy_encode(PORT_TYPE_1G, 0) | + phy_encode(PORT_TYPE_1G, 1)); + } } else { err = fill_phy_probe_info(np, parent, info); if (err) @@ -8656,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np) dev->name, (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"), (np->flags & NIU_FLAGS_10G ? "10G" : "1G"), - (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"), + (np->flags & NIU_FLAGS_FIBER ? "FIBER" : + (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" : + "COPPER")), (np->mac_xcvr == MAC_XCVR_MII ? "MII" : (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")), np->vpd.phy_type); diff --git a/drivers/net/niu.h b/drivers/net/niu.h index c6fa883daa22..180ca8ae93de 100644 --- a/drivers/net/niu.h +++ b/drivers/net/niu.h @@ -1048,6 +1048,13 @@ #define PLL_CFG_LD_SHIFT 8 #define PLL_CFG_MPY 0x0000001e #define PLL_CFG_MPY_SHIFT 1 +#define PLL_CFG_MPY_4X 0x0 +#define PLL_CFG_MPY_5X 0x00000002 +#define PLL_CFG_MPY_6X 0x00000004 +#define PLL_CFG_MPY_8X 0x00000008 +#define PLL_CFG_MPY_10X 0x0000000a +#define PLL_CFG_MPY_12X 0x0000000c +#define PLL_CFG_MPY_12P5X 0x0000000e #define PLL_CFG_ENPLL 0x00000001 #define ESR2_TI_PLL_STS_L (ESR2_BASE + 0x002) @@ -1093,6 +1100,9 @@ #define PLL_TX_CFG_INVPAIR 0x00000080 #define PLL_TX_CFG_RATE 0x00000060 #define PLL_TX_CFG_RATE_SHIFT 5 +#define PLL_TX_CFG_RATE_FULL 0x0 +#define PLL_TX_CFG_RATE_HALF 0x20 +#define PLL_TX_CFG_RATE_QUAD 0x40 #define PLL_TX_CFG_BUSWIDTH 0x0000001c #define PLL_TX_CFG_BUSWIDTH_SHIFT 2 #define PLL_TX_CFG_ENTEST 0x00000002 @@ -1132,6 +1142,9 @@ #define PLL_RX_CFG_INVPAIR 0x00000080 #define PLL_RX_CFG_RATE 0x00000060 #define PLL_RX_CFG_RATE_SHIFT 5 +#define PLL_RX_CFG_RATE_FULL 0x0 +#define PLL_RX_CFG_RATE_HALF 0x20 +#define PLL_RX_CFG_RATE_QUAD 0x40 #define PLL_RX_CFG_BUSWIDTH 0x0000001c #define PLL_RX_CFG_BUSWIDTH_SHIFT 2 #define PLL_RX_CFG_ENTEST 0x00000002 -- cgit v1.2.3 From d8c3e23d06c1020f38b7b6290135a9522a2e3052 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 14 Nov 2008 14:47:29 -0800 Subject: niu: Bump driver version and release date. This driver is pretty mature, and the worst of the known problems has been fixed (the 32-bit failures due to readq implementation). So let's finally give it a version of 1.0 Signed-off-by: David S. Miller --- drivers/net/niu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index be6b4d7e2bb4..1b6f548c4411 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -33,8 +33,8 @@ #define DRV_MODULE_NAME "niu" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "0.9" -#define DRV_MODULE_RELDATE "May 4, 2008" +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "Nov 14, 2008" static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; -- cgit v1.2.3 From 5421ae0153b4ba0469967cfd8de96144e3bf3979 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Fri, 14 Nov 2008 14:51:45 -0800 Subject: scm: fix scm_fp_list->list initialization made in wrong place This is the next page of the scm recursion story (the commit f8d570a4 net: Fix recursive descent in __scm_destroy()). In function scm_fp_dup(), the INIT_LIST_HEAD(&fpl->list) of newly created fpl is done *before* the subsequent memcpy from the old structure and thus the freshly initialized list is overwritten. But that's OK, since this initialization is not required at all, since the fpl->list is list_add-ed at the destruction time in any case (and is unused in other code), so I propose to drop both initializations, rather than moving it after the memcpy. Please, correct me if I miss something significant. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/core/scm.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/core/scm.c b/net/core/scm.c index ab242cc1acca..b12303dd39d9 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -75,7 +75,6 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp) if (!fpl) return -ENOMEM; *fplp = fpl; - INIT_LIST_HEAD(&fpl->list); fpl->count = 0; } fpp = &fpl->fp[fpl->count]; @@ -301,7 +300,6 @@ struct scm_fp_list *scm_fp_dup(struct scm_fp_list *fpl) new_fpl = kmalloc(sizeof(*fpl), GFP_KERNEL); if (new_fpl) { - INIT_LIST_HEAD(&new_fpl->list); for (i=fpl->count-1; i>=0; i--) get_file(fpl->fp[i]); memcpy(new_fpl, fpl, sizeof(*fpl)); -- cgit v1.2.3 From 18acfa2597d57c19249346d130fc3334244557b4 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 13 Nov 2008 21:26:27 +0300 Subject: net/ucc_geth: Fix oops in uec_get_ethtool_stats() p_{tx,rx}_fw_statistics_pram are special: they're available only when a device is open. If the device is closed, we should just fill the data with zeroes. Fixes the following oops: root@b1:~# ifconfig eth1 down root@b1:~# ethtool -S eth1 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc01e1dcc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01e1dcc] uec_get_ethtool_stats+0x98/0x124 LR [c0287cc8] ethtool_get_stats+0xfc/0x23c Call Trace: [cfaadde0] [c0287ca8] ethtool_get_stats+0xdc/0x23c (unreliable) [cfaade20] [c0288340] dev_ethtool+0x2fc/0x588 [cfaade50] [c0285648] dev_ioctl+0x290/0x33c [cfaadea0] [c0272238] sock_ioctl+0x80/0x2ec [cfaadec0] [c00b5ae4] vfs_ioctl+0x40/0xc0 [cfaadee0] [c00b5fa8] do_vfs_ioctl+0x78/0x20c [cfaadf10] [c00b617c] sys_ioctl+0x40/0x74 [cfaadf40] [c00142d8] ret_from_syscall+0x0/0x38 [...] ---[ end trace b941007b2dfb9759 ]--- Segmentation fault p.s. While at it, also remove u64 casts, they aren't needed. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/net/ucc_geth_ethtool.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 85f38a6b6a49..68a7f5414133 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -323,17 +323,17 @@ static void uec_get_ethtool_stats(struct net_device *netdev, if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) { base = (u32 __iomem *)&ugeth->ug_regs->tx64; for (i = 0; i < UEC_HW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = in_be32(&base[i]); } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) { base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram; for (i = 0; i < UEC_TX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) { base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram; for (i = 0; i < UEC_RX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } } -- cgit v1.2.3 From 81183059e89c36f9b4c41f9332d642c2e0bff971 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 12 Nov 2008 10:07:11 -0600 Subject: gianfar: Fix DMA unmap invocations We weren't unmapping DMA memory, which will break when gianfar gets used on systems with more than 32-bits of memory. Also, it's just plain wrong. Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 83a5cb6aa23b..c4af949bf860 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1407,6 +1407,10 @@ static int gfar_clean_tx_ring(struct net_device *dev) if (bdp->status & TXBD_DEF) dev->stats.collisions++; + /* Unmap the DMA memory */ + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + bdp->length, DMA_TO_DEVICE); + /* Free the sk buffer associated with this TxBD */ dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]); @@ -1666,6 +1670,9 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) skb = priv->rx_skbuff[priv->skb_currx]; + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + priv->rx_buffer_size, DMA_FROM_DEVICE); + /* We drop the frame if we failed to allocate a new buffer */ if (unlikely(!newskb || !(bdp->status & RXBD_LAST) || bdp->status & RXBD_ERR)) { @@ -1674,14 +1681,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - if (skb) { - dma_unmap_single(&priv->dev->dev, - bdp->bufPtr, - priv->rx_buffer_size, - DMA_FROM_DEVICE); - + if (skb) dev_kfree_skb_any(skb); - } } else { /* Increment the number of packets */ dev->stats.rx_packets++; -- cgit v1.2.3 From 7ee0fddfe05f105d3346aa8774695e7130697836 Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Tue, 11 Nov 2008 16:21:48 -0600 Subject: atl1e: fix broken multicast by removing unnecessary crc inversion Inverting the crc after calling ether_crc_le() is unnecessary and breaks multicast. Remove it. Tested-by: David Madore Signed-off-by: Jay Cliburn Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/net/atl1e/atl1e_hw.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c index 8cbc1b59bd62..4a7700620119 100644 --- a/drivers/net/atl1e/atl1e_hw.c +++ b/drivers/net/atl1e/atl1e_hw.c @@ -163,9 +163,6 @@ int atl1e_read_mac_addr(struct atl1e_hw *hw) * atl1e_hash_mc_addr * purpose * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB */ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) { @@ -174,7 +171,6 @@ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) int i; crc32 = ether_crc_le(6, mc_addr); - crc32 = ~crc32; for (i = 0; i < 32; i++) value |= (((crc32 >> i) & 1) << (31 - i)); -- cgit v1.2.3 From 3b259e365998291a02488225e32b9f2b73723b3e Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Sun, 9 Nov 2008 15:05:30 -0600 Subject: atl1: Do not enumerate options unsupported by chip Of the various WOL options provided in include/linux/ethtool.h, the L1 NIC supports only magic packet. Remove all options except magic packet from the atl1 driver. Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 246d92b42636..aef403d299ee 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -3404,14 +3404,8 @@ static void atl1_get_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + wol->supported = WAKE_MAGIC; wol->wolopts = 0; - if (adapter->wol & ATLX_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & ATLX_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & ATLX_WUFC_BC) - wol->wolopts |= WAKE_BCAST; if (adapter->wol & ATLX_WUFC_MAG) wol->wolopts |= WAKE_MAGIC; return; @@ -3422,15 +3416,10 @@ static int atl1_set_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | + WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= ATLX_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= ATLX_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= ATLX_WUFC_BC; if (wol->wolopts & WAKE_MAGIC) adapter->wol |= ATLX_WUFC_MAG; return 0; -- cgit v1.2.3 From 3e44017b589f001941723dfdfede2ca6284dddce Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 9 Nov 2008 05:34:47 +0100 Subject: phylib: fix premature freeing of struct mii_bus Commit 46abc02175b3c246dd5141d878f565a8725060c9 ("phylib: give mdio buses a device tree presence") added a call to device_unregister() in a situation where the caller did not intend for the device to be freed yet, but apart from just unregistering the device from the system, device_unregister() does an additional put_device() that is intended to free it. The right function to use in this situation is device_del(), which unregisters the device from the system like device_unregister() does, but without dropping the reference count an additional time. Bug report from Bryan Wu . Signed-off-by: Lennert Buytenhek Tested-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/phy/mdio_bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index d0ed1ef284a8..536bda1f428b 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -136,7 +136,7 @@ void mdiobus_unregister(struct mii_bus *bus) BUG_ON(bus->state != MDIOBUS_REGISTERED); bus->state = MDIOBUS_UNREGISTERED; - device_unregister(&bus->dev); + device_del(&bus->dev); for (i = 0; i < PHY_MAX_ADDR; i++) { if (bus->phy_map[i]) device_unregister(&bus->phy_map[i]->dev); -- cgit v1.2.3 From e7ddee9037e7dd43de1ad08b51727e552aedd836 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Nov 2008 13:44:38 -0500 Subject: cifs: disable sharing session and tcon and add new TCP sharing code The code that allows these structs to be shared is extremely racy. Disable the sharing of SMB and tcon structs for now until we can come up with a way to do this that's race free. We want to continue to share TCP sessions, however since they are required for multiuser mounts. For that, implement a new (hopefully race-free) scheme. Add a new global list of TCP sessions, and take care to get a reference to it whenever we're dealing with one. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 2 +- fs/cifs/cifsfs.c | 3 +- fs/cifs/cifsglob.h | 17 +++-- fs/cifs/cifsproto.h | 1 + fs/cifs/cifssmb.c | 18 ++--- fs/cifs/connect.c | 205 ++++++++++++++++++--------------------------------- 6 files changed, 96 insertions(+), 150 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index ba8723d95996..40b5108fb4f9 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -144,7 +144,7 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) seq_printf(m, "TCP status: %d\n\tLocal Users To " "Server: %d SecMode: 0x%x Req On Wire: %d", ses->server->tcpStatus, - atomic_read(&ses->server->socketUseCount), + ses->server->srv_count, ses->server->secMode, atomic_read(&ses->server->inFlight)); diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index af16a2406b1c..2946dab0718f 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1059,7 +1059,7 @@ init_cifs(void) { int rc = 0; cifs_proc_init(); - INIT_LIST_HEAD(&global_cifs_sock_list); + INIT_LIST_HEAD(&cifs_tcp_ses_list); INIT_LIST_HEAD(&GlobalSMBSessionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); @@ -1089,6 +1089,7 @@ init_cifs(void) GlobalMaxActiveXid = 0; memset(Local_System_Name, 0, 15); rwlock_init(&GlobalSMBSeslock); + rwlock_init(&cifs_tcp_ses_lock); spin_lock_init(&GlobalMid_Lock); if (cifs_max_pending < 2) { diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 13dc48414a78..313f7bfedec7 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -123,6 +123,7 @@ struct cifs_cred { struct TCP_Server_Info { struct list_head tcp_ses_list; struct list_head smb_ses_list; + int srv_count; /* reference counter */ /* 15 character server name + 0x20 16th byte indicating type = srv */ char server_RFC1001_name[SERVER_NAME_LEN_WITH_NULL]; char unicode_server_Name[SERVER_NAME_LEN_WITH_NULL * 2]; @@ -144,7 +145,6 @@ struct TCP_Server_Info { bool svlocal:1; /* local server or remote */ bool noblocksnd; /* use blocking sendmsg */ bool noautotune; /* do not autotune send buf sizes */ - atomic_t socketUseCount; /* number of open cifs sessions on socket */ atomic_t inFlight; /* number of requests on the wire to server */ #ifdef CONFIG_CIFS_STATS2 atomic_t inSend; /* requests trying to send */ @@ -591,13 +591,18 @@ require use of the stronger protocol */ #define GLOBAL_EXTERN extern #endif - -/* the list of TCP_Server_Info structures, ie each of the sockets +/* + * the list of TCP_Server_Info structures, ie each of the sockets * connecting our client to a distinct server (ip address), is - * chained together by global_cifs_sock_list. The list of all our SMB + * chained together by cifs_tcp_ses_list. The list of all our SMB * sessions (and from that the tree connections) can be found - * by iterating over global_cifs_sock_list */ -GLOBAL_EXTERN struct list_head global_cifs_sock_list; + * by iterating over cifs_tcp_ses_list + */ +GLOBAL_EXTERN struct list_head cifs_tcp_ses_list; + +/* protects cifs_tcp_ses_list and srv_count for each tcp session */ +GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock; + GLOBAL_EXTERN struct list_head GlobalSMBSessionList; /* BB to be removed by jl*/ GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 6f21ecb85ce5..0250a994c6e6 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -102,6 +102,7 @@ extern void acl_to_uid_mode(struct inode *inode, const char *path, const __u16 *pfid); extern int mode_to_acl(struct inode *inode, const char *path, __u64); +extern void cifs_put_tcp_session(struct TCP_Server_Info *server); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *, const char *); extern int cifs_umount(struct super_block *, struct cifs_sb_info *); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 7f0651b69573..cd9e9a145e4d 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -664,8 +664,9 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) rc = -EIO; goto neg_err_exit; } - - if (server->socketUseCount.counter > 1) { + read_lock(&cifs_tcp_ses_lock); + if (server->srv_count > 1) { + read_unlock(&cifs_tcp_ses_lock); if (memcmp(server->server_GUID, pSMBr->u.extended_response. GUID, 16) != 0) { @@ -674,9 +675,11 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) pSMBr->u.extended_response.GUID, 16); } - } else + } else { + read_unlock(&cifs_tcp_ses_lock); memcpy(server->server_GUID, pSMBr->u.extended_response.GUID, 16); + } if (count == 16) { server->secType = RawNTLMSSP; @@ -830,12 +833,9 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) pSMB->AndXCommand = 0xFF; rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0); session_already_dead: - atomic_dec(&ses->server->socketUseCount); - if (atomic_read(&ses->server->socketUseCount) == 0) { - spin_lock(&GlobalMid_Lock); - ses->server->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - rc = -ESHUTDOWN; + if (ses->server) { + cifs_put_tcp_session(ses->server); + rc = 0; } up(&ses->sesSem); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 30ab8dc68e17..a0314259f94d 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -659,6 +659,11 @@ multi_t2_fnd: } } /* end while !EXITING */ + /* take it off the list, if it's not already */ + write_lock(&cifs_tcp_ses_lock); + list_del_init(&server->tcp_ses_list); + write_unlock(&cifs_tcp_ses_lock); + spin_lock(&GlobalMid_Lock); server->tcpStatus = CifsExiting; spin_unlock(&GlobalMid_Lock); @@ -1357,92 +1362,66 @@ cifs_parse_mount_options(char *options, const char *devname, return 0; } -static struct cifsSesInfo * -cifs_find_tcp_session(struct in_addr *target_ip_addr, - struct in6_addr *target_ip6_addr, - char *userName, struct TCP_Server_Info **psrvTcp) +static struct TCP_Server_Info * +cifs_find_tcp_session(struct sockaddr *addr) { struct list_head *tmp; - struct cifsSesInfo *ses; - - *psrvTcp = NULL; - - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); - if (!ses->server) + struct TCP_Server_Info *server; + struct sockaddr_in *addr4 = (struct sockaddr_in *) addr; + struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *) addr; + + write_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &cifs_tcp_ses_list) { + server = list_entry(tmp, struct TCP_Server_Info, + tcp_ses_list); + + /* + * the demux thread can exit on its own while still in CifsNew + * so don't accept any sockets in that state. Since the + * tcpStatus never changes back to CifsNew it's safe to check + * for this without a lock. + */ + if (server->tcpStatus == CifsNew) continue; - if (target_ip_addr && - ses->server->addr.sockAddr.sin_addr.s_addr != target_ip_addr->s_addr) - continue; - else if (target_ip6_addr && - memcmp(&ses->server->addr.sockAddr6.sin6_addr, - target_ip6_addr, sizeof(*target_ip6_addr))) - continue; - /* BB lock server and tcp session; increment use count here?? */ - - /* found a match on the TCP session */ - *psrvTcp = ses->server; + if (addr->sa_family == AF_INET && + (addr4->sin_addr.s_addr != + server->addr.sockAddr.sin_addr.s_addr)) + continue; + else if (addr->sa_family == AF_INET6 && + memcmp(&server->addr.sockAddr6.sin6_addr, + &addr6->sin6_addr, sizeof(addr6->sin6_addr))) + continue; - /* BB check if reconnection needed */ - if (strncmp(ses->userName, userName, MAX_USERNAME_SIZE) == 0) { - read_unlock(&GlobalSMBSeslock); - /* Found exact match on both TCP and - SMB sessions */ - return ses; - } - /* else tcp and smb sessions need reconnection */ + ++server->srv_count; + write_unlock(&cifs_tcp_ses_lock); + return server; } - read_unlock(&GlobalSMBSeslock); - + write_unlock(&cifs_tcp_ses_lock); return NULL; } -static struct cifsTconInfo * -find_unc(__be32 new_target_ip_addr, char *uncName, char *userName) +void +cifs_put_tcp_session(struct TCP_Server_Info *server) { - struct list_head *tmp; - struct cifsTconInfo *tcon; - __be32 old_ip; - - read_lock(&GlobalSMBSeslock); - - list_for_each(tmp, &GlobalTreeConnectionList) { - cFYI(1, ("Next tcon")); - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - if (!tcon->ses || !tcon->ses->server) - continue; - - old_ip = tcon->ses->server->addr.sockAddr.sin_addr.s_addr; - cFYI(1, ("old ip addr: %x == new ip %x ?", - old_ip, new_target_ip_addr)); - - if (old_ip != new_target_ip_addr) - continue; - - /* BB lock tcon, server, tcp session and increment use count? */ - /* found a match on the TCP session */ - /* BB check if reconnection needed */ - cFYI(1, ("IP match, old UNC: %s new: %s", - tcon->treeName, uncName)); + struct task_struct *task; - if (strncmp(tcon->treeName, uncName, MAX_TREE_SIZE)) - continue; + write_lock(&cifs_tcp_ses_lock); + if (--server->srv_count > 0) { + write_unlock(&cifs_tcp_ses_lock); + return; + } - cFYI(1, ("and old usr: %s new: %s", - tcon->treeName, uncName)); + list_del_init(&server->tcp_ses_list); + write_unlock(&cifs_tcp_ses_lock); - if (strncmp(tcon->ses->userName, userName, MAX_USERNAME_SIZE)) - continue; - - /* matched smb session (user name) */ - read_unlock(&GlobalSMBSeslock); - return tcon; - } + spin_lock(&GlobalMid_Lock); + server->tcpStatus = CifsExiting; + spin_unlock(&GlobalMid_Lock); - read_unlock(&GlobalSMBSeslock); - return NULL; + task = xchg(&server->tsk, NULL); + if (task) + force_sig(SIGKILL, task); } int @@ -1881,16 +1860,6 @@ convert_delimiter(char *path, char delim) } } -static void -kill_cifsd(struct TCP_Server_Info *server) -{ - struct task_struct *task; - - task = xchg(&server->tsk, NULL); - if (task) - force_sig(SIGKILL, task); -} - static void setup_cifs_sb(struct smb_vol *pvolume_info, struct cifs_sb_info *cifs_sb) { @@ -2069,21 +2038,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } - if (addr.sa_family == AF_INET) - existingCifsSes = cifs_find_tcp_session(&sin_server->sin_addr, - NULL /* no ipv6 addr */, - volume_info.username, &srvTcp); - else if (addr.sa_family == AF_INET6) { - cFYI(1, ("looking for ipv6 address")); - existingCifsSes = cifs_find_tcp_session(NULL /* no ipv4 addr */, - &sin_server6->sin6_addr, - volume_info.username, &srvTcp); - } else { - rc = -EINVAL; - goto out; - } - - if (!srvTcp) { + srvTcp = cifs_find_tcp_session(&addr); + if (srvTcp) { + cFYI(1, ("Existing tcp session with server found")); + } else { /* create socket */ if (addr.sa_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ @@ -2153,6 +2111,12 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, memcpy(srvTcp->server_RFC1001_name, volume_info.target_rfc1001_name, 16); srvTcp->sequence_number = 0; + INIT_LIST_HEAD(&srvTcp->tcp_ses_list); + ++srvTcp->srv_count; + write_lock(&cifs_tcp_ses_lock); + list_add(&srvTcp->tcp_ses_list, + &cifs_tcp_ses_list); + write_unlock(&cifs_tcp_ses_lock); } } @@ -2204,8 +2168,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, rc = cifs_setup_session(xid, pSesInfo, cifs_sb->local_nls); up(&pSesInfo->sesSem); - if (!rc) - atomic_inc(&srvTcp->socketUseCount); } } @@ -2213,9 +2175,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (!rc) { setup_cifs_sb(&volume_info, cifs_sb); - tcon = - find_unc(sin_server->sin_addr.s_addr, volume_info.UNC, - volume_info.username); if (tcon) { cFYI(1, ("Found match on UNC path")); if (tcon->seal != volume_info.seal) @@ -2278,35 +2237,21 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* on error free sesinfo and tcon struct if needed */ mount_fail_check: if (rc) { - /* if session setup failed, use count is zero but - we still need to free cifsd thread */ - if (atomic_read(&srvTcp->socketUseCount) == 0) { - spin_lock(&GlobalMid_Lock); - srvTcp->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - kill_cifsd(srvTcp); - } - /* If find_unc succeeded then rc == 0 so we can not end */ - if (tcon) /* up accidently freeing someone elses tcon struct */ + /* If find_unc succeeded then rc == 0 so we can not end */ + /* up accidently freeing someone elses tcon struct */ + if (tcon) tconInfoFree(tcon); + if (existingCifsSes == NULL) { if (pSesInfo) { if ((pSesInfo->server) && - (pSesInfo->status == CifsGood)) { - int temp_rc; - temp_rc = CIFSSMBLogoff(xid, pSesInfo); - /* if the socketUseCount is now zero */ - if ((temp_rc == -ESHUTDOWN) && - (pSesInfo->server)) - kill_cifsd(pSesInfo->server); - } else { + (pSesInfo->status == CifsGood)) + CIFSSMBLogoff(xid, pSesInfo); + else { cFYI(1, ("No session or bad tcon")); - if (pSesInfo->server) { - spin_lock(&GlobalMid_Lock); - srvTcp->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - kill_cifsd(pSesInfo->server); - } + if (pSesInfo->server) + cifs_put_tcp_session( + pSesInfo->server); } sesInfoFree(pSesInfo); /* pSesInfo = NULL; */ @@ -3613,13 +3558,7 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) if (rc == -EBUSY) { FreeXid(xid); return 0; - } else if (rc == -ESHUTDOWN) { - cFYI(1, ("Waking up socket by sending signal")); - if (ses->server) - kill_cifsd(ses->server); - rc = 0; - } /* else - we have an smb session - left on this socket do not kill cifsd */ + } } else cFYI(1, ("No session or bad tcon")); } -- cgit v1.2.3 From 6a6b97d360702b98c02c7fca4c4e088dcf3a2985 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 13 Nov 2008 10:04:46 +0900 Subject: libata: improve phantom device detection Currently libata uses four methods to detect device presence. 1. PHY status if available. 2. TF register R/W test (only promotes presence, never demotes) 3. device signature after reset 4. IDENTIFY failure detection in SFF state machine Combination of the above works well in most cases but recently there have been a few reports where a phantom device causes unnecessary delay during probe. In both cases, PHY status wasn't available. In one case, it passed #2 and #3 and failed IDENTIFY with ATA_ERR which didn't qualify as #4. The other failed #2 but as it passed #3 and #4, it still caused failure. In both cases, phantom device reported diagnostic failure, so these cases can be safely worked around by considering any !ATA_DRQ IDENTIFY failure as NODEV_HINT if diagnostic failure is set. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 4b4739486327..9033d164c4ec 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1227,10 +1227,19 @@ fsm_start: /* ATA PIO protocol */ if (unlikely((status & ATA_DRQ) == 0)) { /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) + if (likely(status & (ATA_ERR | ATA_DF))) { /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else { + + /* If diagnostic failed and this is + * IDENTIFY, it's likely a phantom + * device. Mark hint. + */ + if (qc->dev->horkage & + ATA_HORKAGE_DIAGNOSTIC) + qc->err_mask |= + AC_ERR_NODEV_HINT; + } else { /* HSM violation. Let EH handle this. * Phantom devices also trigger this * condition. Mark hint. -- cgit v1.2.3 From 14fbf50d695207754daeb96270b3027a3821121f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Nov 2008 13:53:46 -0500 Subject: cifs: reinstate sharing of SMB sessions sans races We do this by abandoning the global list of SMB sessions and instead moving to a per-server list. This entails adding a new list head to the TCP_Server_Info struct. The refcounting for the cifsSesInfo is moved to a non-atomic variable. We have to protect it by a lock anyway, so there's no benefit to making it an atomic. The list and refcount are protected by the global cifs_tcp_ses_lock. The patch also adds a new routines to find and put SMB sessions and that properly take and put references under the lock. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 53 ++++++------ fs/cifs/cifsfs.c | 17 ++-- fs/cifs/cifsglob.h | 6 +- fs/cifs/cifsproto.h | 1 - fs/cifs/cifssmb.c | 22 ++--- fs/cifs/connect.c | 226 ++++++++++++++++++++++++++++----------------------- fs/cifs/misc.c | 16 ++-- 7 files changed, 175 insertions(+), 166 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 40b5108fb4f9..59841a68b0b6 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -107,9 +107,9 @@ void cifs_dump_mids(struct TCP_Server_Info *server) #ifdef CONFIG_PROC_FS static int cifs_debug_data_proc_show(struct seq_file *m, void *v) { - struct list_head *tmp; - struct list_head *tmp1; + struct list_head *tmp, *tmp2, *tmp3; struct mid_q_entry *mid_entry; + struct TCP_Server_Info *server; struct cifsSesInfo *ses; struct cifsTconInfo *tcon; int i; @@ -122,43 +122,45 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) seq_printf(m, "Servers:"); i = 0; - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &cifs_tcp_ses_list) { + server = list_entry(tmp, struct TCP_Server_Info, + tcp_ses_list); i++; - ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); - if ((ses->serverDomain == NULL) || (ses->serverOS == NULL) || - (ses->serverNOS == NULL)) { - seq_printf(m, "\nentry for %s not fully " - "displayed\n\t", ses->serverName); - } else { - seq_printf(m, + list_for_each(tmp2, &server->smb_ses_list) { + ses = list_entry(tmp2, struct cifsSesInfo, + smb_ses_list); + if ((ses->serverDomain == NULL) || + (ses->serverOS == NULL) || + (ses->serverNOS == NULL)) { + seq_printf(m, "\nentry for %s not fully " + "displayed\n\t", ses->serverName); + } else { + seq_printf(m, "\n%d) Name: %s Domain: %s Mounts: %d OS:" " %s \n\tNOS: %s\tCapability: 0x%x\n\tSMB" " session status: %d\t", i, ses->serverName, ses->serverDomain, - atomic_read(&ses->inUse), - ses->serverOS, ses->serverNOS, + ses->ses_count, ses->serverOS, ses->serverNOS, ses->capabilities, ses->status); - } - if (ses->server) { + } seq_printf(m, "TCP status: %d\n\tLocal Users To " - "Server: %d SecMode: 0x%x Req On Wire: %d", - ses->server->tcpStatus, - ses->server->srv_count, - ses->server->secMode, - atomic_read(&ses->server->inFlight)); + "Server: %d SecMode: 0x%x Req On Wire: %d", + server->tcpStatus, server->srv_count, + server->secMode, + atomic_read(&server->inFlight)); #ifdef CONFIG_CIFS_STATS2 seq_printf(m, " In Send: %d In MaxReq Wait: %d", - atomic_read(&ses->server->inSend), - atomic_read(&ses->server->num_waiters)); + atomic_read(&server->inSend), + atomic_read(&server->num_waiters)); #endif seq_puts(m, "\nMIDs:\n"); spin_lock(&GlobalMid_Lock); - list_for_each(tmp1, &ses->server->pending_mid_q) { - mid_entry = list_entry(tmp1, struct + list_for_each(tmp3, &server->pending_mid_q) { + mid_entry = list_entry(tmp3, struct mid_q_entry, qhead); seq_printf(m, "State: %d com: %d pid:" @@ -171,9 +173,8 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) } spin_unlock(&GlobalMid_Lock); } - } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); seq_putc(m, '\n'); seq_puts(m, "Shares:"); diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 2946dab0718f..a1e96620b097 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1031,24 +1031,24 @@ static int cifs_oplock_thread(void *dummyarg) static int cifs_dnotify_thread(void *dummyarg) { struct list_head *tmp; - struct cifsSesInfo *ses; + struct TCP_Server_Info *server; do { if (try_to_freeze()) continue; set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(15*HZ); - read_lock(&GlobalSMBSeslock); /* check if any stuck requests that need to be woken up and wakeq so the thread can wake up and error out */ - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server && atomic_read(&ses->server->inFlight)) - wake_up_all(&ses->server->response_q); + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &cifs_tcp_ses_list) { + server = list_entry(tmp, struct TCP_Server_Info, + tcp_ses_list); + if (atomic_read(&server->inFlight)) + wake_up_all(&server->response_q); } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } while (!kthread_should_stop()); return 0; @@ -1060,7 +1060,6 @@ init_cifs(void) int rc = 0; cifs_proc_init(); INIT_LIST_HEAD(&cifs_tcp_ses_list); - INIT_LIST_HEAD(&GlobalSMBSessionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); #ifdef CONFIG_CIFS_EXPERIMENTAL diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 313f7bfedec7..631a99f72f22 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -195,14 +195,14 @@ struct cifsUidInfo { * Session structure. One of these for each uid session with a particular host */ struct cifsSesInfo { - struct list_head cifsSessionList; + struct list_head smb_ses_list; struct list_head tcon_list; struct semaphore sesSem; #if 0 struct cifsUidInfo *uidInfo; /* pointer to user info */ #endif struct TCP_Server_Info *server; /* pointer to server info */ - atomic_t inUse; /* # of mounts (tree connections) on this ses */ + int ses_count; /* reference counter */ enum statusEnum status; unsigned overrideSecFlg; /* if non-zero override global sec flags */ __u16 ipc_tid; /* special tid for connection to IPC share */ @@ -602,8 +602,6 @@ GLOBAL_EXTERN struct list_head cifs_tcp_ses_list; /* protects cifs_tcp_ses_list and srv_count for each tcp session */ GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock; - -GLOBAL_EXTERN struct list_head GlobalSMBSessionList; /* BB to be removed by jl*/ GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 0250a994c6e6..6f21ecb85ce5 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -102,7 +102,6 @@ extern void acl_to_uid_mode(struct inode *inode, const char *path, const __u16 *pfid); extern int mode_to_acl(struct inode *inode, const char *path, __u64); -extern void cifs_put_tcp_session(struct TCP_Server_Info *server); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *, const char *); extern int cifs_umount(struct super_block *, struct cifs_sb_info *); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index cd9e9a145e4d..9c95617baa4d 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -799,20 +799,16 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) int rc = 0; cFYI(1, ("In SMBLogoff for session disconnect")); - if (ses) - down(&ses->sesSem); - else - return -EIO; - - atomic_dec(&ses->inUse); - if (atomic_read(&ses->inUse) > 0) { - up(&ses->sesSem); - return -EBUSY; - } - if (ses->server == NULL) + /* + * BB: do we need to check validity of ses and server? They should + * always be valid since we have an active reference. If not, that + * should probably be a BUG() + */ + if (!ses || !ses->server) return -EIO; + down(&ses->sesSem); if (ses->need_reconnect) goto session_already_dead; /* no need to send SMBlogoff if uid already closed due to reconnect */ @@ -833,10 +829,6 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) pSMB->AndXCommand = 0xFF; rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0); session_already_dead: - if (ses->server) { - cifs_put_tcp_session(ses->server); - rc = 0; - } up(&ses->sesSem); /* if session dead then we do not need to do ulogoff, diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index a0314259f94d..44130e052e0b 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -144,23 +144,18 @@ cifs_reconnect(struct TCP_Server_Info *server) /* before reconnecting the tcp session, mark the smb session (uid) and the tid bad so they are not used until reconnected */ - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); - if (ses->server) { - if (ses->server == server) { - ses->need_reconnect = true; - ses->ipc_tid = 0; - } - } - /* else tcp and smb sessions need reconnection */ + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + ses->need_reconnect = true; + ses->ipc_tid = 0; } + read_unlock(&cifs_tcp_ses_lock); list_for_each(tmp, &GlobalTreeConnectionList) { tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); if ((tcon->ses) && (tcon->ses->server == server)) tcon->need_reconnect = true; } - read_unlock(&GlobalSMBSeslock); /* do not want to be sending data on a socket we are freeing */ down(&server->tcpSem); if (server->ssocket) { @@ -696,29 +691,29 @@ multi_t2_fnd: if (smallbuf) /* no sense logging a debug message if NULL */ cifs_small_buf_release(smallbuf); - read_lock(&GlobalSMBSeslock); + /* + * BB: we shouldn't have to do any of this. It shouldn't be + * possible to exit from the thread with active SMB sessions + */ + read_lock(&cifs_tcp_ses_lock); if (list_empty(&server->pending_mid_q)) { /* loop through server session structures attached to this and mark them dead */ - list_for_each(tmp, &GlobalSMBSessionList) { - ses = - list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server == server) { - ses->status = CifsExiting; - ses->server = NULL; - } + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, + smb_ses_list); + ses->status = CifsExiting; + ses->server = NULL; } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } else { /* although we can not zero the server struct pointer yet, since there are active requests which may depnd on them, mark the corresponding SMB sessions as exiting too */ - list_for_each(tmp, &GlobalSMBSessionList) { + list_for_each(tmp, &server->smb_ses_list) { ses = list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server == server) - ses->status = CifsExiting; + smb_ses_list); + ses->status = CifsExiting; } spin_lock(&GlobalMid_Lock); @@ -733,7 +728,7 @@ multi_t2_fnd: } } spin_unlock(&GlobalMid_Lock); - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); /* 1/8th of sec is more than enough time for them to exit */ msleep(125); } @@ -755,14 +750,13 @@ multi_t2_fnd: if there are any pointing to this (e.g if a crazy root user tried to kill cifsd kernel thread explicitly this might happen) */ - write_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server == server) - ses->server = NULL; + /* BB: This shouldn't be necessary, see above */ + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + ses->server = NULL; } - write_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); kfree(server->hostname); task_to_wake = xchg(&server->tsk, NULL); @@ -1401,7 +1395,7 @@ cifs_find_tcp_session(struct sockaddr *addr) return NULL; } -void +static void cifs_put_tcp_session(struct TCP_Server_Info *server) { struct task_struct *task; @@ -1424,6 +1418,50 @@ cifs_put_tcp_session(struct TCP_Server_Info *server) force_sig(SIGKILL, task); } +static struct cifsSesInfo * +cifs_find_smb_ses(struct TCP_Server_Info *server, char *username) +{ + struct list_head *tmp; + struct cifsSesInfo *ses; + + write_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + if (strncmp(ses->userName, username, MAX_USERNAME_SIZE)) + continue; + + ++ses->ses_count; + write_unlock(&cifs_tcp_ses_lock); + return ses; + } + write_unlock(&cifs_tcp_ses_lock); + return NULL; +} + +static void +cifs_put_smb_ses(struct cifsSesInfo *ses) +{ + int xid; + struct TCP_Server_Info *server = ses->server; + + write_lock(&cifs_tcp_ses_lock); + if (--ses->ses_count > 0) { + write_unlock(&cifs_tcp_ses_lock); + return; + } + + list_del_init(&ses->smb_ses_list); + write_unlock(&cifs_tcp_ses_lock); + + if (ses->status == CifsGood) { + xid = GetXid(); + CIFSSMBLogoff(xid, ses); + _FreeXid(xid); + } + sesInfoFree(ses); + cifs_put_tcp_session(server); +} + int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path, const struct nls_table *nls_codepage, unsigned int *pnum_referrals, @@ -1958,7 +1996,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr; struct smb_vol volume_info; struct cifsSesInfo *pSesInfo = NULL; - struct cifsSesInfo *existingCifsSes = NULL; struct cifsTconInfo *tcon = NULL; struct TCP_Server_Info *srvTcp = NULL; @@ -2112,6 +2149,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, volume_info.target_rfc1001_name, 16); srvTcp->sequence_number = 0; INIT_LIST_HEAD(&srvTcp->tcp_ses_list); + INIT_LIST_HEAD(&srvTcp->smb_ses_list); ++srvTcp->srv_count; write_lock(&cifs_tcp_ses_lock); list_add(&srvTcp->tcp_ses_list, @@ -2120,10 +2158,16 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } - if (existingCifsSes) { - pSesInfo = existingCifsSes; + pSesInfo = cifs_find_smb_ses(srvTcp, volume_info.username); + if (pSesInfo) { cFYI(1, ("Existing smb sess found (status=%d)", pSesInfo->status)); + /* + * The existing SMB session already has a reference to srvTcp, + * so we can put back the extra one we got before + */ + cifs_put_tcp_session(srvTcp); + down(&pSesInfo->sesSem); if (pSesInfo->need_reconnect) { cFYI(1, ("Session needs reconnect")); @@ -2134,41 +2178,44 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } else if (!rc) { cFYI(1, ("Existing smb sess not found")); pSesInfo = sesInfoAlloc(); - if (pSesInfo == NULL) + if (pSesInfo == NULL) { rc = -ENOMEM; - else { - pSesInfo->server = srvTcp; - sprintf(pSesInfo->serverName, "%u.%u.%u.%u", - NIPQUAD(sin_server->sin_addr.s_addr)); + goto mount_fail_check; } - if (!rc) { - /* volume_info.password freed at unmount */ - if (volume_info.password) { - pSesInfo->password = volume_info.password; - /* set to NULL to prevent freeing on exit */ - volume_info.password = NULL; - } - if (volume_info.username) - strncpy(pSesInfo->userName, - volume_info.username, - MAX_USERNAME_SIZE); - if (volume_info.domainname) { - int len = strlen(volume_info.domainname); - pSesInfo->domainName = - kmalloc(len + 1, GFP_KERNEL); - if (pSesInfo->domainName) - strcpy(pSesInfo->domainName, - volume_info.domainname); - } - pSesInfo->linux_uid = volume_info.linux_uid; - pSesInfo->overrideSecFlg = volume_info.secFlg; - down(&pSesInfo->sesSem); - /* BB FIXME need to pass vol->secFlgs BB */ - rc = cifs_setup_session(xid, pSesInfo, - cifs_sb->local_nls); - up(&pSesInfo->sesSem); - } + /* new SMB session uses our srvTcp ref */ + pSesInfo->server = srvTcp; + sprintf(pSesInfo->serverName, "%u.%u.%u.%u", + NIPQUAD(sin_server->sin_addr.s_addr)); + + write_lock(&cifs_tcp_ses_lock); + list_add(&pSesInfo->smb_ses_list, &srvTcp->smb_ses_list); + write_unlock(&cifs_tcp_ses_lock); + + /* volume_info.password freed at unmount */ + if (volume_info.password) { + pSesInfo->password = volume_info.password; + /* set to NULL to prevent freeing on exit */ + volume_info.password = NULL; + } + if (volume_info.username) + strncpy(pSesInfo->userName, volume_info.username, + MAX_USERNAME_SIZE); + if (volume_info.domainname) { + int len = strlen(volume_info.domainname); + pSesInfo->domainName = kmalloc(len + 1, GFP_KERNEL); + if (pSesInfo->domainName) + strcpy(pSesInfo->domainName, + volume_info.domainname); + } + pSesInfo->linux_uid = volume_info.linux_uid; + pSesInfo->overrideSecFlg = volume_info.secFlg; + down(&pSesInfo->sesSem); + + /* BB FIXME need to pass vol->secFlgs BB */ + rc = cifs_setup_session(xid, pSesInfo, + cifs_sb->local_nls); + up(&pSesInfo->sesSem); } /* search for existing tcon to this server share */ @@ -2209,11 +2256,9 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, tcon->Flags)); } } - if (!rc) { - atomic_inc(&pSesInfo->inUse); - tcon->seal = volume_info.seal; - } else + if (rc) goto mount_fail_check; + tcon->seal = volume_info.seal; } /* we can have only one retry value for a connection @@ -2234,29 +2279,19 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* BB FIXME fix time_gran to be larger for LANMAN sessions */ sb->s_time_gran = 100; -/* on error free sesinfo and tcon struct if needed */ mount_fail_check: + /* on error free sesinfo and tcon struct if needed */ if (rc) { /* If find_unc succeeded then rc == 0 so we can not end */ /* up accidently freeing someone elses tcon struct */ if (tcon) tconInfoFree(tcon); - if (existingCifsSes == NULL) { - if (pSesInfo) { - if ((pSesInfo->server) && - (pSesInfo->status == CifsGood)) - CIFSSMBLogoff(xid, pSesInfo); - else { - cFYI(1, ("No session or bad tcon")); - if (pSesInfo->server) - cifs_put_tcp_session( - pSesInfo->server); - } - sesInfoFree(pSesInfo); - /* pSesInfo = NULL; */ - } - } + /* should also end up putting our tcp session ref if needed */ + if (pSesInfo) + cifs_put_smb_ses(pSesInfo); + else + cifs_put_tcp_session(srvTcp); } else { atomic_inc(&tcon->useCount); cifs_sb->tcon = tcon; @@ -3551,16 +3586,7 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) } DeleteTconOplockQEntries(cifs_sb->tcon); tconInfoFree(cifs_sb->tcon); - if ((ses) && (ses->server)) { - /* save off task so we do not refer to ses later */ - cFYI(1, ("About to do SMBLogoff ")); - rc = CIFSSMBLogoff(xid, ses); - if (rc == -EBUSY) { - FreeXid(xid); - return 0; - } - } else - cFYI(1, ("No session or bad tcon")); + cifs_put_smb_ses(ses); } cifs_sb->tcon = NULL; @@ -3568,8 +3594,6 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) cifs_sb->prepathlen = 0; cifs_sb->prepath = NULL; kfree(tmp); - if (ses) - sesInfoFree(ses); FreeXid(xid); return rc; diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 88786ba02d27..46c8c7baccba 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -75,12 +75,11 @@ sesInfoAlloc(void) ret_buf = kzalloc(sizeof(struct cifsSesInfo), GFP_KERNEL); if (ret_buf) { - write_lock(&GlobalSMBSeslock); atomic_inc(&sesInfoAllocCount); ret_buf->status = CifsNew; - list_add(&ret_buf->cifsSessionList, &GlobalSMBSessionList); + ++ret_buf->ses_count; + INIT_LIST_HEAD(&ret_buf->smb_ses_list); init_MUTEX(&ret_buf->sesSem); - write_unlock(&GlobalSMBSeslock); } return ret_buf; } @@ -93,10 +92,7 @@ sesInfoFree(struct cifsSesInfo *buf_to_free) return; } - write_lock(&GlobalSMBSeslock); atomic_dec(&sesInfoAllocCount); - list_del(&buf_to_free->cifsSessionList); - write_unlock(&GlobalSMBSeslock); kfree(buf_to_free->serverOS); kfree(buf_to_free->serverDomain); kfree(buf_to_free->serverNOS); @@ -350,9 +346,9 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , if (current->fsuid != treeCon->ses->linux_uid) { cFYI(1, ("Multiuser mode and UID " "did not match tcon uid")); - read_lock(&GlobalSMBSeslock); - list_for_each(temp_item, &GlobalSMBSessionList) { - ses = list_entry(temp_item, struct cifsSesInfo, cifsSessionList); + read_lock(&cifs_tcp_ses_lock); + list_for_each(temp_item, &treeCon->ses->server->smb_ses_list) { + ses = list_entry(temp_item, struct cifsSesInfo, smb_ses_list); if (ses->linux_uid == current->fsuid) { if (ses->server == treeCon->ses->server) { cFYI(1, ("found matching uid substitute right smb_uid")); @@ -364,7 +360,7 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , } } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } } } -- cgit v1.2.3 From d82c2df54e2f7e447476350848d8eccc8d2fe46a Mon Sep 17 00:00:00 2001 From: Steve French Date: Sat, 15 Nov 2008 00:07:26 +0000 Subject: [CIFS] minor cleanup to cifs_mount Signed-off-by: Steve French --- fs/cifs/connect.c | 74 +++++++++++++++++++++++++------------------------------ 1 file changed, 34 insertions(+), 40 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 44130e052e0b..a3dc0d7cafc3 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1368,7 +1368,6 @@ cifs_find_tcp_session(struct sockaddr *addr) list_for_each(tmp, &cifs_tcp_ses_list) { server = list_entry(tmp, struct TCP_Server_Info, tcp_ses_list); - /* * the demux thread can exit on its own while still in CifsNew * so don't accept any sockets in that state. Since the @@ -1389,6 +1388,7 @@ cifs_find_tcp_session(struct sockaddr *addr) ++server->srv_count; write_unlock(&cifs_tcp_ses_lock); + cFYI(1, ("Existing tcp session with server found")); return server; } write_unlock(&cifs_tcp_ses_lock); @@ -2076,9 +2076,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } srvTcp = cifs_find_tcp_session(&addr); - if (srvTcp) { - cFYI(1, ("Existing tcp session with server found")); - } else { /* create socket */ + if (!srvTcp) { /* create socket */ if (addr.sa_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ @@ -2292,45 +2290,41 @@ mount_fail_check: cifs_put_smb_ses(pSesInfo); else cifs_put_tcp_session(srvTcp); - } else { - atomic_inc(&tcon->useCount); - cifs_sb->tcon = tcon; - tcon->ses = pSesInfo; - - /* do not care if following two calls succeed - informational */ - if (!tcon->ipc) { - CIFSSMBQFSDeviceInfo(xid, tcon); - CIFSSMBQFSAttributeInfo(xid, tcon); - } - - /* tell server which Unix caps we support */ - if (tcon->ses->capabilities & CAP_UNIX) - /* reset of caps checks mount to see if unix extensions - disabled for just this mount */ - reset_cifs_unix_caps(xid, tcon, sb, &volume_info); - else - tcon->unix_ext = 0; /* server does not support them */ - - /* convert forward to back slashes in prepath here if needed */ - if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) - convert_delimiter(cifs_sb->prepath, - CIFS_DIR_SEP(cifs_sb)); + goto out; + } + atomic_inc(&tcon->useCount); + cifs_sb->tcon = tcon; + tcon->ses = pSesInfo; - if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) { - cifs_sb->rsize = 1024 * 127; - cFYI(DBG2, - ("no very large read support, rsize now 127K")); - } - if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X)) - cifs_sb->wsize = min(cifs_sb->wsize, - (tcon->ses->server->maxBuf - - MAX_CIFS_HDR_SIZE)); - if (!(tcon->ses->capabilities & CAP_LARGE_READ_X)) - cifs_sb->rsize = min(cifs_sb->rsize, - (tcon->ses->server->maxBuf - - MAX_CIFS_HDR_SIZE)); + /* do not care if following two calls succeed - informational */ + if (!tcon->ipc) { + CIFSSMBQFSDeviceInfo(xid, tcon); + CIFSSMBQFSAttributeInfo(xid, tcon); } + /* tell server which Unix caps we support */ + if (tcon->ses->capabilities & CAP_UNIX) + /* reset of caps checks mount to see if unix extensions + disabled for just this mount */ + reset_cifs_unix_caps(xid, tcon, sb, &volume_info); + else + tcon->unix_ext = 0; /* server does not support them */ + + /* convert forward to back slashes in prepath here if needed */ + if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) + convert_delimiter(cifs_sb->prepath, CIFS_DIR_SEP(cifs_sb)); + + if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) { + cifs_sb->rsize = 1024 * 127; + cFYI(DBG2, ("no very large read support, rsize now 127K")); + } + if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X)) + cifs_sb->wsize = min(cifs_sb->wsize, + (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE)); + if (!(tcon->ses->capabilities & CAP_LARGE_READ_X)) + cifs_sb->rsize = min(cifs_sb->rsize, + (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE)); + /* volume_info.password is freed above when existing session found (in which case it is not needed anymore) but when new sesion is created the password ptr is put in the new session structure (in which case the -- cgit v1.2.3 From cecf61bdee426a3e0a014f7e26990d09c71ed458 Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Fri, 14 Nov 2008 16:37:54 -0800 Subject: rtc: rtc-sun4v fixes, revised - simplified code - use platform_driver_probe - removed locking: it's provided by rtc subsystem Signed-off-by: Alessandro Zummo Signed-off-by: David S. Miller --- drivers/rtc/rtc-sun4v.c | 69 ++++++++++++++----------------------------------- 1 file changed, 19 insertions(+), 50 deletions(-) diff --git a/drivers/rtc/rtc-sun4v.c b/drivers/rtc/rtc-sun4v.c index 2012ccbb4a53..5b2261052a65 100644 --- a/drivers/rtc/rtc-sun4v.c +++ b/drivers/rtc/rtc-sun4v.c @@ -1,4 +1,4 @@ -/* rtc-sun4c.c: Hypervisor based RTC for SUN4V systems. +/* rtc-sun4v.c: Hypervisor based RTC for SUN4V systems. * * Copyright (C) 2008 David S. Miller */ @@ -7,21 +7,11 @@ #include #include #include -#include #include #include #include -MODULE_AUTHOR("David S. Miller "); -MODULE_DESCRIPTION("SUN4V RTC driver"); -MODULE_LICENSE("GPL"); - -struct sun4v_rtc { - struct rtc_device *rtc; - spinlock_t lock; -}; - static unsigned long hypervisor_get_time(void) { unsigned long ret, time; @@ -45,15 +35,7 @@ retry: static int sun4v_read_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; - - spin_lock_irqsave(&p->lock, flags); - secs = hypervisor_get_time(); - spin_unlock_irqrestore(&p->lock, flags); - - rtc_time_to_tm(secs, tm); - + rtc_time_to_tm(hypervisor_get_time(), tm); return 0; } @@ -80,19 +62,14 @@ retry: static int sun4v_set_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; + unsigned long secs; int err; err = rtc_tm_to_time(tm, &secs); if (err) return err; - spin_lock_irqsave(&p->lock, flags); - err = hypervisor_set_time(secs); - spin_unlock_irqrestore(&p->lock, flags); - - return err; + return hypervisor_set_time(secs); } static const struct rtc_class_ops sun4v_rtc_ops = { @@ -100,33 +77,22 @@ static const struct rtc_class_ops sun4v_rtc_ops = { .set_time = sun4v_set_time, }; -static int __devinit sun4v_rtc_probe(struct platform_device *pdev) +static int __init sun4v_rtc_probe(struct platform_device *pdev) { - struct sun4v_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); - - if (!p) - return -ENOMEM; - - spin_lock_init(&p->lock); - - p->rtc = rtc_device_register("sun4v", &pdev->dev, + struct rtc_device *rtc = rtc_device_register("sun4v", &pdev->dev, &sun4v_rtc_ops, THIS_MODULE); - if (IS_ERR(p->rtc)) { - int err = PTR_ERR(p->rtc); - kfree(p); - return err; - } - platform_set_drvdata(pdev, p); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); return 0; } -static int __devexit sun4v_rtc_remove(struct platform_device *pdev) +static int __exit sun4v_rtc_remove(struct platform_device *pdev) { - struct sun4v_rtc *p = platform_get_drvdata(pdev); - - rtc_device_unregister(p->rtc); - kfree(p); + struct rtc_device *rtc = platform_get_drvdata(pdev); + rtc_device_unregister(rtc); return 0; } @@ -135,13 +101,12 @@ static struct platform_driver sun4v_rtc_driver = { .name = "rtc-sun4v", .owner = THIS_MODULE, }, - .probe = sun4v_rtc_probe, - .remove = __devexit_p(sun4v_rtc_remove), + .remove = __exit_p(sun4v_rtc_remove), }; static int __init sun4v_rtc_init(void) { - return platform_driver_register(&sun4v_rtc_driver); + return platform_driver_probe(&sun4v_rtc_driver, sun4v_rtc_probe); } static void __exit sun4v_rtc_exit(void) @@ -151,3 +116,7 @@ static void __exit sun4v_rtc_exit(void) module_init(sun4v_rtc_init); module_exit(sun4v_rtc_exit); + +MODULE_AUTHOR("David S. Miller "); +MODULE_DESCRIPTION("SUN4V RTC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From df81d2371aeca0f7474f197a3090830899016e39 Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Wed, 5 Nov 2008 00:09:12 +0100 Subject: [SCSI] dpt_i2o: fix transferred data length for scsi_set_resid() dpt_i2o.c::adpt_i2o_to_scsi() reads the value at (reply+5) which should contain the length in bytes of the transferred data. This would be correct if reply was a u32 *. However it is a void * here, so we need to read the value at (reply+20) instead. The value at (reply+5) is usually 0xff0000, which is apparently 'large enough' and didn't cause any trouble until 2.6.27 where commit 427e59f09fdba387547106de7bab980b7fff77be Author: James Bottomley Date: Sat Mar 8 18:24:17 2008 -0600 [SCSI] make use of the residue value caused this to become visible through e.g. iostat -x . Signed-off-by: Miquel van Smoorenburg Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/dpt_i2o.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 8aba4fdfb522..6194ed5d02c4 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -2445,7 +2445,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) hba_status = detailed_status >> 8; // calculate resid for sg - scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+5)); + scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+20)); pHba = (adpt_hba*) cmd->device->host->hostdata[0]; @@ -2456,7 +2456,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) case I2O_SCSI_DSC_SUCCESS: cmd->result = (DID_OK << 16); // handle underflow - if(readl(reply+5) < cmd->underflow ) { + if (readl(reply+20) < cmd->underflow) { cmd->result = (DID_ERROR <<16); printk(KERN_WARNING"%s: SCSI CMD underflow\n",pHba->name); } -- cgit v1.2.3 From c39555d6edd0142972f577405d5259879ecc1635 Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Fri, 14 Nov 2008 17:46:22 -0500 Subject: ALSA: hda: STAC_VREF_EVENT value change Changed value for STAC_VREF_EVENT from 0x40 to 0x00 because the unsol response value is only 6-bits width and the former value was 1<<6 which is an overrun. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 1633ef2c654a..f205570def1c 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -36,9 +36,11 @@ #include "hda_beep.h" #define NUM_CONTROL_ALLOC 32 + +#define STAC_VREF_EVENT 0x00 +#define STAC_INSERT_EVENT 0x10 #define STAC_PWR_EVENT 0x20 #define STAC_HP_EVENT 0x30 -#define STAC_VREF_EVENT 0x40 enum { STAC_REF, -- cgit v1.2.3 From d6f35e3f0da14a5eb02114708d88ae2f59dc8283 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 14 Nov 2008 19:08:18 +0100 Subject: ALSA: sound/pci/pcxhr/pcxhr.c: introduce missing kfree and pci_disable_device Error handling code following a kzalloc should free the allocated data. The error handling code is adjusted to call pci_disable_device(pci); as well, as done later in the function The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/pci/pcxhr/pcxhr.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c index 0e06c6c9fcc0..73de6e989b3d 100644 --- a/sound/pci/pcxhr/pcxhr.c +++ b/sound/pci/pcxhr/pcxhr.c @@ -1229,8 +1229,11 @@ static int __devinit pcxhr_probe(struct pci_dev *pci, const struct pci_device_id return -ENOMEM; } - if (snd_BUG_ON(pci_id->driver_data >= PCI_ID_LAST)) + if (snd_BUG_ON(pci_id->driver_data >= PCI_ID_LAST)) { + kfree(mgr); + pci_disable_device(pci); return -ENODEV; + } card_name = pcxhr_board_params[pci_id->driver_data].board_name; mgr->playback_chips = pcxhr_board_params[pci_id->driver_data].playback_chips; mgr->capture_chips = pcxhr_board_params[pci_id->driver_data].capture_chips; -- cgit v1.2.3 From 8141c7f3e7aee618312fa1c15109e1219de784a7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 15 Nov 2008 10:20:36 -0800 Subject: Move "exit_robust_list" into mm_release() We don't want to get rid of the futexes just at exit() time, we want to drop them when doing an execve() too, since that gets rid of the previous VM image too. Doing it at mm_release() time means that we automatically always do it when we disassociate a VM map from the task. Reported-by: pageexec@freemail.hu Cc: Andrew Morton Cc: Nick Piggin Cc: Hugh Dickins Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Brad Spengler Cc: Alex Efros Cc: Peter Zijlstra Cc: Oleg Nesterov Signed-off-by: Linus Torvalds --- kernel/exit.c | 9 --------- kernel/fork.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/kernel/exit.c b/kernel/exit.c index ae2b92be5fae..2d8be7ebb0f7 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include /* for audit_free() */ #include @@ -1059,14 +1058,6 @@ NORET_TYPE void do_exit(long code) exit_itimers(tsk->signal); } acct_collect(code, group_dead); -#ifdef CONFIG_FUTEX - if (unlikely(tsk->robust_list)) - exit_robust_list(tsk); -#ifdef CONFIG_COMPAT - if (unlikely(tsk->compat_robust_list)) - compat_exit_robust_list(tsk); -#endif -#endif if (group_dead) tty_audit_exit(); if (unlikely(tsk->audit_context)) diff --git a/kernel/fork.c b/kernel/fork.c index f6083561dfe0..2a372a0e206f 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include #include @@ -519,6 +520,16 @@ void mm_release(struct task_struct *tsk, struct mm_struct *mm) { struct completion *vfork_done = tsk->vfork_done; + /* Get rid of any futexes when releasing the mm */ +#ifdef CONFIG_FUTEX + if (unlikely(tsk->robust_list)) + exit_robust_list(tsk); +#ifdef CONFIG_COMPAT + if (unlikely(tsk->compat_robust_list)) + compat_exit_robust_list(tsk); +#endif +#endif + /* Get rid of any cached register state */ deactivate_mm(tsk, mm); -- cgit v1.2.3 From 8e5f262bfcd90c041160a491a238661ebbb584a4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 15 Nov 2008 19:28:54 +0100 Subject: ALSA: hda - Check model type instead of SSID in patch_92hd71bxx() Check board preset model instead of codec->subsystem_id in patch_92hd71bxx() so that other hardwares configured via the model option work like the given model. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f205570def1c..0df6f979f2a3 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4488,8 +4488,8 @@ again: codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs; break; case 0x111d7608: /* 5 Port with Analog Mixer */ - switch (codec->subsystem_id) { - case 0x103c361a: + switch (spec->board_config) { + case STAC_HP_M4: /* Enable VREF power saving on GPIO1 detect */ snd_hda_codec_write(codec, codec->afg, 0, AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x02); -- cgit v1.2.3 From 27123cbc264de89ce6951b1b4c84c223eb0f1702 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 14 Nov 2008 08:10:19 +0100 Subject: m68k: Fix off-by-one in m68k_setup_user_interrupt() commit 69961c375288bdab7604e0bb1c8d22999bb8a347 ("[PATCH] m68k/Atari: Interrupt updates") added a BUG_ON() with an incorrect upper bound comparison, which causes an early crash on VME boards, where IRQ_USER is 8, cnt is 192 and NR_IRQS is 200. Reported-by: Stephen N Chivers Tested-by: Kars de Jong Signed-off-by: Geert Uytterhoeven Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- arch/m68k/kernel/ints.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 7e8a0d394e61..761ee0440c99 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -133,7 +133,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, { int i; - BUG_ON(IRQ_USER + cnt >= NR_IRQS); + BUG_ON(IRQ_USER + cnt > NR_IRQS); m68k_first_user_vec = vec; for (i = 0; i < cnt; i++) irq_controller[IRQ_USER + i] = &user_irq_controller; -- cgit v1.2.3 From fb75109834ca5c5e2f0f17f0c9e20182ea55b65f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 14 Nov 2008 08:54:46 +0100 Subject: misc: C2port needs m68k allmodconfig: | drivers/misc/c2port/core.c: In function 'c2port_reset': | drivers/misc/c2port/core.c:73: error: dereferencing pointer to incomplete type | drivers/misc/c2port/core.c: In function 'c2port_strobe_ck': | drivers/misc/c2port/core.c:91: error: dereferencing pointer to incomplete type Include to fix it, as m68k's local_irq_enable() needs to know about struct task_struct. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- drivers/misc/c2port/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c index 976b35d1d035..0207dd59090d 100644 --- a/drivers/misc/c2port/core.c +++ b/drivers/misc/c2port/core.c @@ -18,6 +18,7 @@ #include #include #include +#include #include -- cgit v1.2.3 From 748f1a2ed7a68e15b28a1da3559afbebba121772 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Fri, 14 Nov 2008 16:25:01 +0900 Subject: mm: remove unevictable's show_page_path Hugh Dickins reported show_page_path() is buggy and unsafe because - lack dput() against d_find_alias() - don't concern vma->vm_mm->owner == NULL - lack lock_page() it was only for debugging, so rather than trying to fix it, just remove it now. Reported-by: Hugh Dickins Signed-off-by: Hugh Dickins Signed-off-by: KOSAKI Motohiro CC: Lee Schermerhorn CC: Rik van Riel Signed-off-by: Linus Torvalds --- mm/vmscan.c | 35 ----------------------------------- 1 file changed, 35 deletions(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 3b5860294bb6..c141b3e78071 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2368,39 +2368,6 @@ int page_evictable(struct page *page, struct vm_area_struct *vma) return 1; } -static void show_page_path(struct page *page) -{ - char buf[256]; - if (page_is_file_cache(page)) { - struct address_space *mapping = page->mapping; - struct dentry *dentry; - pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT); - - spin_lock(&mapping->i_mmap_lock); - dentry = d_find_alias(mapping->host); - printk(KERN_INFO "rescued: %s %lu\n", - dentry_path(dentry, buf, 256), pgoff); - spin_unlock(&mapping->i_mmap_lock); - } else { -#if defined(CONFIG_MM_OWNER) && defined(CONFIG_MMU) - struct anon_vma *anon_vma; - struct vm_area_struct *vma; - - anon_vma = page_lock_anon_vma(page); - if (!anon_vma) - return; - - list_for_each_entry(vma, &anon_vma->head, anon_vma_node) { - printk(KERN_INFO "rescued: anon %s\n", - vma->vm_mm->owner->comm); - break; - } - page_unlock_anon_vma(anon_vma); -#endif - } -} - - /** * check_move_unevictable_page - check page for evictability and move to appropriate zone lru list * @page: page to check evictability and move to appropriate lru list @@ -2421,8 +2388,6 @@ retry: if (page_evictable(page, NULL)) { enum lru_list l = LRU_INACTIVE_ANON + page_is_file_cache(page); - show_page_path(page); - __dec_zone_state(zone, NR_UNEVICTABLE); list_move(&page->lru, &zone->lru[l].list); __inc_zone_state(zone, NR_INACTIVE_ANON + l); -- cgit v1.2.3 From 52168e60f7d86d83124903098ac8c2dba93cd1c4 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 14 Nov 2008 13:47:31 +0000 Subject: Revert "x86: blacklist DMAR on Intel G31/G33 chipsets" This reverts commit e51af6630848406fc97adbd71443818cdcda297b, which was wrongly hoovered up and submitted about a month after a better fix had already been merged. The better fix is commit cbda1ba898647aeb4ee770b803c922f595e97731 ("PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets"), where we do this blacklisting based on the DMI identification for the offending motherboard, since sometimes this chipset (or at least a chipset with the same PCI ID) apparently _does_ actually have an IOMMU. Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- arch/x86/include/asm/iommu.h | 1 - arch/x86/kernel/early-quirks.c | 18 ------------------ 2 files changed, 19 deletions(-) diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h index e4a552d44465..0b500c5b6446 100644 --- a/arch/x86/include/asm/iommu.h +++ b/arch/x86/include/asm/iommu.h @@ -6,7 +6,6 @@ extern void no_iommu_init(void); extern struct dma_mapping_ops nommu_dma_ops; extern int force_iommu, no_iommu; extern int iommu_detected; -extern int dmar_disabled; extern unsigned long iommu_nr_pages(unsigned long addr, unsigned long len); diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 3ce029ffaa55..1b894b72c0f5 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -188,20 +188,6 @@ static void __init ati_bugs_contd(int num, int slot, int func) } #endif -#ifdef CONFIG_DMAR -static void __init intel_g33_dmar(int num, int slot, int func) -{ - struct acpi_table_header *dmar_tbl; - acpi_status status; - - status = acpi_get_table(ACPI_SIG_DMAR, 0, &dmar_tbl); - if (ACPI_SUCCESS(status)) { - printk(KERN_INFO "BIOS BUG: DMAR advertised on Intel G31/G33 chipset -- ignoring\n"); - dmar_disabled = 1; - } -} -#endif - #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) @@ -225,10 +211,6 @@ static struct chipset early_qrk[] __initdata = { PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd }, -#ifdef CONFIG_DMAR - { PCI_VENDOR_ID_INTEL, 0x29c0, - PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, intel_g33_dmar }, -#endif {} }; -- cgit v1.2.3 From d091c2f58ba32029495a933b721e8e02fbd12caa Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 12 Nov 2008 21:16:43 +0100 Subject: Add 'pr_fmt()' format modifier to pr_xyz macros. A common reason for device drivers to implement their own printk macros is the lack of a printk prefix with the standard pr_xyz macros. Introduce a pr_fmt() macro that is applied for every pr_xyz macro to the format string. The most common use of the pr_fmt macro would be to add the name of the device driver to all pr_xyz messages in a source file. Signed-off-by: Martin Schwidefsky Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 42 +++++++++++++++++++++++------------------- 1 file changed, 23 insertions(+), 19 deletions(-) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index fba141d3ca07..dc7e0d0a6474 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -318,32 +318,36 @@ static inline char *pack_hex_byte(char *buf, u8 byte) return buf; } -#define pr_emerg(fmt, arg...) \ - printk(KERN_EMERG fmt, ##arg) -#define pr_alert(fmt, arg...) \ - printk(KERN_ALERT fmt, ##arg) -#define pr_crit(fmt, arg...) \ - printk(KERN_CRIT fmt, ##arg) -#define pr_err(fmt, arg...) \ - printk(KERN_ERR fmt, ##arg) -#define pr_warning(fmt, arg...) \ - printk(KERN_WARNING fmt, ##arg) -#define pr_notice(fmt, arg...) \ - printk(KERN_NOTICE fmt, ##arg) -#define pr_info(fmt, arg...) \ - printk(KERN_INFO fmt, ##arg) +#ifndef pr_fmt +#define pr_fmt(fmt) fmt +#endif + +#define pr_emerg(fmt, ...) \ + printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) +#define pr_alert(fmt, ...) \ + printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_crit(fmt, ...) \ + printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_err(fmt, ...) \ + printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warning(fmt, ...) \ + printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) +#define pr_notice(fmt, ...) \ + printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) +#define pr_info(fmt, ...) \ + printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) /* If you are writing a driver, please use dev_dbg instead */ #if defined(CONFIG_DYNAMIC_PRINTK_DEBUG) #define pr_debug(fmt, ...) do { \ - dynamic_pr_debug(fmt, ##__VA_ARGS__); \ + dynamic_pr_debug(pr_fmt(fmt), ##__VA_ARGS__); \ } while (0) #elif defined(DEBUG) -#define pr_debug(fmt, arg...) \ - printk(KERN_DEBUG fmt, ##arg) +#define pr_debug(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #else -#define pr_debug(fmt, arg...) \ - ({ if (0) printk(KERN_DEBUG fmt, ##arg); 0; }) +#define pr_debug(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) #endif /* -- cgit v1.2.3 From 0d3b71009737511ea937ac405205fd8214b898bb Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 13 Nov 2008 20:14:17 +0800 Subject: LIS3LV02Dx: remove unused #include The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/hwmon/lis3lv02d.c This patch removes the said #include . Signed-off-by: Huang Weiyi Signed-off-by: Linus Torvalds --- drivers/hwmon/lis3lv02d.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 752b5c44df9c..c002144c76bc 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 8f7b0ba1c853919b85b54774775f567f30006107 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 15 Nov 2008 01:15:43 +0000 Subject: Fix inotify watch removal/umount races Inotify watch removals suck violently. To kick the watch out we need (in this order) inode->inotify_mutex and ih->mutex. That's fine if we have a hold on inode; however, for all other cases we need to make damn sure we don't race with umount. We can *NOT* just grab a reference to a watch - inotify_unmount_inodes() will happily sail past it and we'll end with reference to inode potentially outliving its superblock. Ideally we just want to grab an active reference to superblock if we can; that will make sure we won't go into inotify_umount_inodes() until we are done. Cleanup is just deactivate_super(). However, that leaves a messy case - what if we *are* racing with umount() and active references to superblock can't be acquired anymore? We can bump ->s_count, grab ->s_umount, which will almost certainly wait until the superblock is shut down and the watch in question is pining for fjords. That's fine, but there is a problem - we might have hit the window between ->s_active getting to 0 / ->s_count - below S_BIAS (i.e. the moment when superblock is past the point of no return and is heading for shutdown) and the moment when deactivate_super() acquires ->s_umount. We could just do drop_super() yield() and retry, but that's rather antisocial and this stuff is luser-triggerable. OTOH, having grabbed ->s_umount and having found that we'd got there first (i.e. that ->s_root is non-NULL) we know that we won't race with inotify_umount_inodes(). So we could grab a reference to watch and do the rest as above, just with drop_super() instead of deactivate_super(), right? Wrong. We had to drop ih->mutex before we could grab ->s_umount. So the watch could've been gone already. That still can be dealt with - we need to save watch->wd, do idr_find() and compare its result with our pointer. If they match, we either have the damn thing still alive or we'd lost not one but two races at once, the watch had been killed and a new one got created with the same ->wd at the same address. That couldn't have happened in inotify_destroy(), but inotify_rm_wd() could run into that. Still, "new one got created" is not a problem - we have every right to kill it or leave it alone, whatever's more convenient. So we can use idr_find(...) == watch && watch->inode->i_sb == sb as "grab it and kill it" check. If it's been our original watch, we are fine, if it's a newcomer - nevermind, just pretend that we'd won the race and kill the fscker anyway; we are safe since we know that its superblock won't be going away. And yes, this is far beyond mere "not very pretty"; so's the entire concept of inotify to start with. Signed-off-by: Al Viro Acked-by: Greg KH Signed-off-by: Linus Torvalds --- fs/inotify.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++-- include/linux/inotify.h | 11 ++++ kernel/audit_tree.c | 91 +++++++++++++++++------------ kernel/auditfilter.c | 14 +++-- 4 files changed, 218 insertions(+), 48 deletions(-) diff --git a/fs/inotify.c b/fs/inotify.c index 690e72595e6e..7bbed1b89825 100644 --- a/fs/inotify.c +++ b/fs/inotify.c @@ -106,6 +106,20 @@ void get_inotify_watch(struct inotify_watch *watch) } EXPORT_SYMBOL_GPL(get_inotify_watch); +int pin_inotify_watch(struct inotify_watch *watch) +{ + struct super_block *sb = watch->inode->i_sb; + spin_lock(&sb_lock); + if (sb->s_count >= S_BIAS) { + atomic_inc(&sb->s_active); + spin_unlock(&sb_lock); + atomic_inc(&watch->count); + return 1; + } + spin_unlock(&sb_lock); + return 0; +} + /** * put_inotify_watch - decrements the ref count on a given watch. cleans up * watch references if the count reaches zero. inotify_watch is freed by @@ -124,6 +138,13 @@ void put_inotify_watch(struct inotify_watch *watch) } EXPORT_SYMBOL_GPL(put_inotify_watch); +void unpin_inotify_watch(struct inotify_watch *watch) +{ + struct super_block *sb = watch->inode->i_sb; + put_inotify_watch(watch); + deactivate_super(sb); +} + /* * inotify_handle_get_wd - returns the next WD for use by the given handle * @@ -479,6 +500,112 @@ void inotify_init_watch(struct inotify_watch *watch) } EXPORT_SYMBOL_GPL(inotify_init_watch); +/* + * Watch removals suck violently. To kick the watch out we need (in this + * order) inode->inotify_mutex and ih->mutex. That's fine if we have + * a hold on inode; however, for all other cases we need to make damn sure + * we don't race with umount. We can *NOT* just grab a reference to a + * watch - inotify_unmount_inodes() will happily sail past it and we'll end + * with reference to inode potentially outliving its superblock. Ideally + * we just want to grab an active reference to superblock if we can; that + * will make sure we won't go into inotify_umount_inodes() until we are + * done. Cleanup is just deactivate_super(). However, that leaves a messy + * case - what if we *are* racing with umount() and active references to + * superblock can't be acquired anymore? We can bump ->s_count, grab + * ->s_umount, which will almost certainly wait until the superblock is shut + * down and the watch in question is pining for fjords. That's fine, but + * there is a problem - we might have hit the window between ->s_active + * getting to 0 / ->s_count - below S_BIAS (i.e. the moment when superblock + * is past the point of no return and is heading for shutdown) and the + * moment when deactivate_super() acquires ->s_umount. We could just do + * drop_super() yield() and retry, but that's rather antisocial and this + * stuff is luser-triggerable. OTOH, having grabbed ->s_umount and having + * found that we'd got there first (i.e. that ->s_root is non-NULL) we know + * that we won't race with inotify_umount_inodes(). So we could grab a + * reference to watch and do the rest as above, just with drop_super() instead + * of deactivate_super(), right? Wrong. We had to drop ih->mutex before we + * could grab ->s_umount. So the watch could've been gone already. + * + * That still can be dealt with - we need to save watch->wd, do idr_find() + * and compare its result with our pointer. If they match, we either have + * the damn thing still alive or we'd lost not one but two races at once, + * the watch had been killed and a new one got created with the same ->wd + * at the same address. That couldn't have happened in inotify_destroy(), + * but inotify_rm_wd() could run into that. Still, "new one got created" + * is not a problem - we have every right to kill it or leave it alone, + * whatever's more convenient. + * + * So we can use idr_find(...) == watch && watch->inode->i_sb == sb as + * "grab it and kill it" check. If it's been our original watch, we are + * fine, if it's a newcomer - nevermind, just pretend that we'd won the + * race and kill the fscker anyway; we are safe since we know that its + * superblock won't be going away. + * + * And yes, this is far beyond mere "not very pretty"; so's the entire + * concept of inotify to start with. + */ + +/** + * pin_to_kill - pin the watch down for removal + * @ih: inotify handle + * @watch: watch to kill + * + * Called with ih->mutex held, drops it. Possible return values: + * 0 - nothing to do, it has died + * 1 - remove it, drop the reference and deactivate_super() + * 2 - remove it, drop the reference and drop_super(); we tried hard to avoid + * that variant, since it involved a lot of PITA, but that's the best that + * could've been done. + */ +static int pin_to_kill(struct inotify_handle *ih, struct inotify_watch *watch) +{ + struct super_block *sb = watch->inode->i_sb; + s32 wd = watch->wd; + + spin_lock(&sb_lock); + if (sb->s_count >= S_BIAS) { + atomic_inc(&sb->s_active); + spin_unlock(&sb_lock); + get_inotify_watch(watch); + mutex_unlock(&ih->mutex); + return 1; /* the best outcome */ + } + sb->s_count++; + spin_unlock(&sb_lock); + mutex_unlock(&ih->mutex); /* can't grab ->s_umount under it */ + down_read(&sb->s_umount); + if (likely(!sb->s_root)) { + /* fs is already shut down; the watch is dead */ + drop_super(sb); + return 0; + } + /* raced with the final deactivate_super() */ + mutex_lock(&ih->mutex); + if (idr_find(&ih->idr, wd) != watch || watch->inode->i_sb != sb) { + /* the watch is dead */ + mutex_unlock(&ih->mutex); + drop_super(sb); + return 0; + } + /* still alive or freed and reused with the same sb and wd; kill */ + get_inotify_watch(watch); + mutex_unlock(&ih->mutex); + return 2; +} + +static void unpin_and_kill(struct inotify_watch *watch, int how) +{ + struct super_block *sb = watch->inode->i_sb; + put_inotify_watch(watch); + switch (how) { + case 1: + deactivate_super(sb); + break; + case 2: + drop_super(sb); + } +} + /** * inotify_destroy - clean up and destroy an inotify instance * @ih: inotify handle @@ -490,11 +617,15 @@ void inotify_destroy(struct inotify_handle *ih) * pretty. We cannot do a simple iteration over the list, because we * do not know the inode until we iterate to the watch. But we need to * hold inode->inotify_mutex before ih->mutex. The following works. + * + * AV: it had to become even uglier to start working ;-/ */ while (1) { struct inotify_watch *watch; struct list_head *watches; + struct super_block *sb; struct inode *inode; + int how; mutex_lock(&ih->mutex); watches = &ih->watches; @@ -503,8 +634,10 @@ void inotify_destroy(struct inotify_handle *ih) break; } watch = list_first_entry(watches, struct inotify_watch, h_list); - get_inotify_watch(watch); - mutex_unlock(&ih->mutex); + sb = watch->inode->i_sb; + how = pin_to_kill(ih, watch); + if (!how) + continue; inode = watch->inode; mutex_lock(&inode->inotify_mutex); @@ -518,7 +651,7 @@ void inotify_destroy(struct inotify_handle *ih) mutex_unlock(&ih->mutex); mutex_unlock(&inode->inotify_mutex); - put_inotify_watch(watch); + unpin_and_kill(watch, how); } /* free this handle: the put matching the get in inotify_init() */ @@ -719,7 +852,9 @@ void inotify_evict_watch(struct inotify_watch *watch) int inotify_rm_wd(struct inotify_handle *ih, u32 wd) { struct inotify_watch *watch; + struct super_block *sb; struct inode *inode; + int how; mutex_lock(&ih->mutex); watch = idr_find(&ih->idr, wd); @@ -727,9 +862,12 @@ int inotify_rm_wd(struct inotify_handle *ih, u32 wd) mutex_unlock(&ih->mutex); return -EINVAL; } - get_inotify_watch(watch); + sb = watch->inode->i_sb; + how = pin_to_kill(ih, watch); + if (!how) + return 0; + inode = watch->inode; - mutex_unlock(&ih->mutex); mutex_lock(&inode->inotify_mutex); mutex_lock(&ih->mutex); @@ -740,7 +878,7 @@ int inotify_rm_wd(struct inotify_handle *ih, u32 wd) mutex_unlock(&ih->mutex); mutex_unlock(&inode->inotify_mutex); - put_inotify_watch(watch); + unpin_and_kill(watch, how); return 0; } diff --git a/include/linux/inotify.h b/include/linux/inotify.h index bd578578a8b9..37ea2894b3c0 100644 --- a/include/linux/inotify.h +++ b/include/linux/inotify.h @@ -134,6 +134,8 @@ extern void inotify_remove_watch_locked(struct inotify_handle *, struct inotify_watch *); extern void get_inotify_watch(struct inotify_watch *); extern void put_inotify_watch(struct inotify_watch *); +extern int pin_inotify_watch(struct inotify_watch *); +extern void unpin_inotify_watch(struct inotify_watch *); #else @@ -228,6 +230,15 @@ static inline void put_inotify_watch(struct inotify_watch *watch) { } +extern inline int pin_inotify_watch(struct inotify_watch *watch) +{ + return 0; +} + +extern inline void unpin_inotify_watch(struct inotify_watch *watch) +{ +} + #endif /* CONFIG_INOTIFY */ #endif /* __KERNEL __ */ diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 8ba0e0d934f2..8b509441f49a 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -24,6 +24,7 @@ struct audit_chunk { struct list_head trees; /* with root here */ int dead; int count; + atomic_long_t refs; struct rcu_head head; struct node { struct list_head list; @@ -56,7 +57,8 @@ static LIST_HEAD(prune_list); * tree is refcounted; one reference for "some rules on rules_list refer to * it", one for each chunk with pointer to it. * - * chunk is refcounted by embedded inotify_watch. + * chunk is refcounted by embedded inotify_watch + .refs (non-zero refcount + * of watch contributes 1 to .refs). * * node.index allows to get from node.list to containing chunk. * MSB of that sucker is stolen to mark taggings that we might have to @@ -121,6 +123,7 @@ static struct audit_chunk *alloc_chunk(int count) INIT_LIST_HEAD(&chunk->hash); INIT_LIST_HEAD(&chunk->trees); chunk->count = count; + atomic_long_set(&chunk->refs, 1); for (i = 0; i < count; i++) { INIT_LIST_HEAD(&chunk->owners[i].list); chunk->owners[i].index = i; @@ -129,9 +132,8 @@ static struct audit_chunk *alloc_chunk(int count) return chunk; } -static void __free_chunk(struct rcu_head *rcu) +static void free_chunk(struct audit_chunk *chunk) { - struct audit_chunk *chunk = container_of(rcu, struct audit_chunk, head); int i; for (i = 0; i < chunk->count; i++) { @@ -141,14 +143,16 @@ static void __free_chunk(struct rcu_head *rcu) kfree(chunk); } -static inline void free_chunk(struct audit_chunk *chunk) +void audit_put_chunk(struct audit_chunk *chunk) { - call_rcu(&chunk->head, __free_chunk); + if (atomic_long_dec_and_test(&chunk->refs)) + free_chunk(chunk); } -void audit_put_chunk(struct audit_chunk *chunk) +static void __put_chunk(struct rcu_head *rcu) { - put_inotify_watch(&chunk->watch); + struct audit_chunk *chunk = container_of(rcu, struct audit_chunk, head); + audit_put_chunk(chunk); } enum {HASH_SIZE = 128}; @@ -176,7 +180,7 @@ struct audit_chunk *audit_tree_lookup(const struct inode *inode) list_for_each_entry_rcu(p, list, hash) { if (p->watch.inode == inode) { - get_inotify_watch(&p->watch); + atomic_long_inc(&p->refs); return p; } } @@ -194,17 +198,49 @@ int audit_tree_match(struct audit_chunk *chunk, struct audit_tree *tree) /* tagging and untagging inodes with trees */ -static void untag_chunk(struct audit_chunk *chunk, struct node *p) +static struct audit_chunk *find_chunk(struct node *p) +{ + int index = p->index & ~(1U<<31); + p -= index; + return container_of(p, struct audit_chunk, owners[0]); +} + +static void untag_chunk(struct node *p) { + struct audit_chunk *chunk = find_chunk(p); struct audit_chunk *new; struct audit_tree *owner; int size = chunk->count - 1; int i, j; + if (!pin_inotify_watch(&chunk->watch)) { + /* + * Filesystem is shutting down; all watches are getting + * evicted, just take it off the node list for this + * tree and let the eviction logics take care of the + * rest. + */ + owner = p->owner; + if (owner->root == chunk) { + list_del_init(&owner->same_root); + owner->root = NULL; + } + list_del_init(&p->list); + p->owner = NULL; + put_tree(owner); + return; + } + + spin_unlock(&hash_lock); + + /* + * pin_inotify_watch() succeeded, so the watch won't go away + * from under us. + */ mutex_lock(&chunk->watch.inode->inotify_mutex); if (chunk->dead) { mutex_unlock(&chunk->watch.inode->inotify_mutex); - return; + goto out; } owner = p->owner; @@ -221,7 +257,7 @@ static void untag_chunk(struct audit_chunk *chunk, struct node *p) inotify_evict_watch(&chunk->watch); mutex_unlock(&chunk->watch.inode->inotify_mutex); put_inotify_watch(&chunk->watch); - return; + goto out; } new = alloc_chunk(size); @@ -263,7 +299,7 @@ static void untag_chunk(struct audit_chunk *chunk, struct node *p) inotify_evict_watch(&chunk->watch); mutex_unlock(&chunk->watch.inode->inotify_mutex); put_inotify_watch(&chunk->watch); - return; + goto out; Fallback: // do the best we can @@ -277,6 +313,9 @@ Fallback: put_tree(owner); spin_unlock(&hash_lock); mutex_unlock(&chunk->watch.inode->inotify_mutex); +out: + unpin_inotify_watch(&chunk->watch); + spin_lock(&hash_lock); } static int create_chunk(struct inode *inode, struct audit_tree *tree) @@ -387,13 +426,6 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) return 0; } -static struct audit_chunk *find_chunk(struct node *p) -{ - int index = p->index & ~(1U<<31); - p -= index; - return container_of(p, struct audit_chunk, owners[0]); -} - static void kill_rules(struct audit_tree *tree) { struct audit_krule *rule, *next; @@ -431,17 +463,10 @@ static void prune_one(struct audit_tree *victim) spin_lock(&hash_lock); while (!list_empty(&victim->chunks)) { struct node *p; - struct audit_chunk *chunk; p = list_entry(victim->chunks.next, struct node, list); - chunk = find_chunk(p); - get_inotify_watch(&chunk->watch); - spin_unlock(&hash_lock); - - untag_chunk(chunk, p); - put_inotify_watch(&chunk->watch); - spin_lock(&hash_lock); + untag_chunk(p); } spin_unlock(&hash_lock); put_tree(victim); @@ -469,7 +494,6 @@ static void trim_marked(struct audit_tree *tree) while (!list_empty(&tree->chunks)) { struct node *node; - struct audit_chunk *chunk; node = list_entry(tree->chunks.next, struct node, list); @@ -477,14 +501,7 @@ static void trim_marked(struct audit_tree *tree) if (!(node->index & (1U<<31))) break; - chunk = find_chunk(node); - get_inotify_watch(&chunk->watch); - spin_unlock(&hash_lock); - - untag_chunk(chunk, node); - - put_inotify_watch(&chunk->watch); - spin_lock(&hash_lock); + untag_chunk(node); } if (!tree->root && !tree->goner) { tree->goner = 1; @@ -878,7 +895,7 @@ static void handle_event(struct inotify_watch *watch, u32 wd, u32 mask, static void destroy_watch(struct inotify_watch *watch) { struct audit_chunk *chunk = container_of(watch, struct audit_chunk, watch); - free_chunk(chunk); + call_rcu(&chunk->head, __put_chunk); } static const struct inotify_operations rtree_inotify_ops = { diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index b7d354e2b0ef..9fd85a4640a0 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1094,8 +1094,8 @@ static void audit_inotify_unregister(struct list_head *in_list) list_for_each_entry_safe(p, n, in_list, ilist) { list_del(&p->ilist); inotify_rm_watch(audit_ih, &p->wdata); - /* the put matching the get in audit_do_del_rule() */ - put_inotify_watch(&p->wdata); + /* the unpin matching the pin in audit_do_del_rule() */ + unpin_inotify_watch(&p->wdata); } } @@ -1389,9 +1389,13 @@ static inline int audit_del_rule(struct audit_entry *entry, /* Put parent on the inotify un-registration * list. Grab a reference before releasing * audit_filter_mutex, to be released in - * audit_inotify_unregister(). */ - list_add(&parent->ilist, &inotify_list); - get_inotify_watch(&parent->wdata); + * audit_inotify_unregister(). + * If filesystem is going away, just leave + * the sucker alone, eviction will take + * care of it. + */ + if (pin_inotify_watch(&parent->wdata)) + list_add(&parent->ilist, &inotify_list); } } } -- cgit v1.2.3 From 9bf1a2445f3c569098b8de7097ca324e65abecc2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 15 Nov 2008 13:42:56 -0800 Subject: Linux 2.6.28-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 7f9ff9bf1544..a9ae5dc0aa16 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Killer Bat of Doom # *DOCUMENTATION* -- cgit v1.2.3 From d53b93f2603554c3420e301bd13ee2c354a15ceb Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 5 Nov 2008 04:48:36 +0000 Subject: mlx4_en: Pause parameters per port Before the change the driver reported the same pause parameters for all the ports, even only one of them was modified. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_netdev.c | 8 ++++---- drivers/net/mlx4/en_params.c | 30 ++++++++++++++++-------------- drivers/net/mlx4/mlx4_en.h | 8 ++++---- 3 files changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index a3f732418c49..96e709d6440a 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -656,10 +656,10 @@ static int mlx4_en_start_port(struct net_device *dev) /* Configure port */ err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) { mlx4_err(mdev, "Failed setting port general configurations" " for port %d, with error %d\n", priv->port, err); diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c index c2e69b1bcd0a..95706ee1c019 100644 --- a/drivers/net/mlx4/en_params.c +++ b/drivers/net/mlx4/en_params.c @@ -90,6 +90,7 @@ MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2"); int mlx4_en_get_profile(struct mlx4_en_dev *mdev) { struct mlx4_en_profile *params = &mdev->profile; + int i; params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF); params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF); @@ -97,11 +98,13 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->rss_xor = (rss_xor != 0); params->rss_mask = rss_mask & 0x1f; params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS); - params->rx_pause = pprx; - params->rx_ppp = pfcrx; - params->tx_pause = pptx; - params->tx_ppp = pfctx; - if (params->rx_ppp || params->tx_ppp) { + for (i = 1; i <= MLX4_MAX_PORTS; i++) { + params->prof[i].rx_pause = pprx; + params->prof[i].rx_ppp = pfcrx; + params->prof[i].tx_pause = pptx; + params->prof[i].tx_ppp = pfctx; + } + if (pfcrx || pfctx) { params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM; params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM; } else { @@ -407,14 +410,14 @@ static int mlx4_en_set_pauseparam(struct net_device *dev, struct mlx4_en_dev *mdev = priv->mdev; int err; - mdev->profile.tx_pause = pause->tx_pause != 0; - mdev->profile.rx_pause = pause->rx_pause != 0; + priv->prof->tx_pause = pause->tx_pause != 0; + priv->prof->rx_pause = pause->rx_pause != 0; err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) mlx4_err(mdev, "Failed setting pause params to\n"); @@ -425,10 +428,9 @@ static void mlx4_en_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) { struct mlx4_en_priv *priv = netdev_priv(dev); - struct mlx4_en_dev *mdev = priv->mdev; - pause->tx_pause = mdev->profile.tx_pause; - pause->rx_pause = mdev->profile.rx_pause; + pause->tx_pause = priv->prof->tx_pause; + pause->rx_pause = priv->prof->rx_pause; } static void mlx4_en_get_ringparam(struct net_device *dev, diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index 11fb17c6e97b..98ddc0811f93 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -322,6 +322,10 @@ struct mlx4_en_port_profile { u32 rx_ring_num; u32 tx_ring_size; u32 rx_ring_size; + u8 rx_pause; + u8 rx_ppp; + u8 tx_pause; + u8 tx_ppp; }; struct mlx4_en_profile { @@ -333,10 +337,6 @@ struct mlx4_en_profile { int rx_moder_cnt; int rx_moder_time; int auto_moder; - u8 rx_pause; - u8 rx_ppp; - u8 tx_pause; - u8 tx_ppp; u8 no_reset; struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1]; }; -- cgit v1.2.3 From 605f196efbf8dcbb3581e76ddd0573899dffcf1f Mon Sep 17 00:00:00 2001 From: Ron Madrid Date: Thu, 6 Nov 2008 09:05:26 +0000 Subject: phy: Add support for Marvell 88E1118 PHY This patch will add support for the Marvell 88E1118 PHY which supports gigabit ethernet among other things. Signed-off-by: Ron Madrid Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4aa547947040..eb6411c4694f 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -227,6 +227,59 @@ static int m88e1111_config_init(struct phy_device *phydev) return 0; } +static int m88e1118_config_aneg(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1011_PHY_SCR, + MII_M1011_PHY_SCR_AUTO_CROSS); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + return 0; +} + +static int m88e1118_config_init(struct phy_device *phydev) +{ + int err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0002); + if (err < 0) + return err; + + /* Enable 1000 Mbit */ + err = phy_write(phydev, 0x15, 0x1070); + if (err < 0) + return err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0003); + if (err < 0) + return err; + + /* Adjust LED Control */ + err = phy_write(phydev, 0x10, 0x021e); + if (err < 0) + return err; + + /* Reset address */ + err = phy_write(phydev, 0x16, 0x0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + return 0; +} + static int m88e1145_config_init(struct phy_device *phydev) { int err; @@ -415,6 +468,19 @@ static struct phy_driver marvell_drivers[] = { .config_intr = &marvell_config_intr, .driver = { .owner = THIS_MODULE }, }, + { + .phy_id = 0x01410e10, + .phy_id_mask = 0xfffffff0, + .name = "Marvell 88E1118", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1118_config_init, + .config_aneg = &m88e1118_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = {.owner = THIS_MODULE,}, + }, { .phy_id = 0x01410cd0, .phy_id_mask = 0xfffffff0, -- cgit v1.2.3 From 29d7b90c15035741d15421b36000509212b3e135 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 16 Nov 2008 08:07:15 +0100 Subject: sched: fix kernel warning on /proc/sched_debug access Luis Henriques reported that with CONFIG_PREEMPT=y + CONFIG_PREEMPT_DEBUG=y + CONFIG_SCHED_DEBUG=y + CONFIG_LATENCYTOP=y enabled, the following warning triggers when using latencytop: > [ 775.663239] BUG: using smp_processor_id() in preemptible [00000000] code: latencytop/6585 > [ 775.663303] caller is native_sched_clock+0x3a/0x80 > [ 775.663314] Pid: 6585, comm: latencytop Tainted: G W 2.6.28-rc4-00355-g9c7c354 #1 > [ 775.663322] Call Trace: > [ 775.663343] [] debug_smp_processor_id+0xe4/0xf0 > [ 775.663356] [] native_sched_clock+0x3a/0x80 > [ 775.663368] [] sched_clock+0x9/0x10 > [ 775.663381] [] proc_sched_show_task+0x8bd/0x10e0 > [ 775.663395] [] sched_show+0x3e/0x80 > [ 775.663408] [] seq_read+0xdb/0x350 > [ 775.663421] [] ? security_file_permission+0x16/0x20 > [ 775.663435] [] vfs_read+0xc8/0x170 > [ 775.663447] [] sys_read+0x55/0x90 > [ 775.663460] [] system_call_fastpath+0x16/0x1b > ... This breakage was caused by me via: 7cbaef9: sched: optimize sched_clock() a bit Change the calls to cpu_clock(). Reported-by: Luis Henriques --- kernel/sched_debug.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 48ecc51e7701..26ed8e3d1c15 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -423,10 +423,11 @@ void proc_sched_show_task(struct task_struct *p, struct seq_file *m) #undef __P { + unsigned int this_cpu = raw_smp_processor_id(); u64 t0, t1; - t0 = sched_clock(); - t1 = sched_clock(); + t0 = cpu_clock(this_cpu); + t1 = cpu_clock(this_cpu); SEQ_printf(m, "%-35s:%21Ld\n", "clock-delta", (long long)(t1-t0)); } -- cgit v1.2.3 From d1f1e9c01006b4b050e090055c75278f80c2a5c5 Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Sat, 15 Nov 2008 11:00:17 +0100 Subject: x86, bts: fix unlock problem in ds.c Fix a problem where ds_request() returned an error without releasing the ds lock. Reported-by: Stephane Eranian Signed-off-by: Markus Metzger Cc: Signed-off-by: Ingo Molnar --- arch/x86/kernel/ds.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 2b69994fd3a8..ac1d5b0586ba 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -384,8 +384,9 @@ static int ds_request(struct task_struct *task, void *base, size_t size, spin_lock(&ds_lock); + error = -EPERM; if (!check_tracer(task)) - return -EPERM; + goto out_unlock; error = -ENOMEM; context = ds_alloc_context(task); -- cgit v1.2.3 From e47411b1f4456480d6c60ebdc7a733e81ccd5d66 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 16 Nov 2008 08:27:53 +0100 Subject: MAINTAINERS: remove me as RAID maintainer Neil has been the maintainer of the RAID/MD code for a long time, remove me as a co-maintainer. Signed-off-by: Ingo Molnar --- MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 8e0777fae3ce..627e4c89328e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3928,8 +3928,6 @@ M: bootc@bootc.net S: Maintained SOFTWARE RAID (Multiple Disks) SUPPORT -P: Ingo Molnar -M: mingo@redhat.com P: Neil Brown M: neilb@suse.de L: linux-raid@vger.kernel.org -- cgit v1.2.3 From 5821e1b74f0d08952cb5da4bfd2d9a388d8df58e Mon Sep 17 00:00:00 2001 From: walimis Date: Sat, 15 Nov 2008 15:19:06 +0800 Subject: function tracing: fix wrong pos computing when read buffer has been fulfilled Impact: make output of available_filter_functions complete phenomenon: The first value of dyn_ftrace_total_info is not equal with `cat available_filter_functions | wc -l`, but they should be equal. root cause: When printing functions with seq_printf in t_show, if the read buffer is just overflowed by current function record, then this function won't be printed to user space through read buffer, it will just be dropped. So we can't see this function printing. So, every time the last function to fill the read buffer, if overflowed, will be dropped. This also applies to set_ftrace_filter if set_ftrace_filter has more bytes than read buffer. fix: Through checking return value of seq_printf, if less than 0, we know this function doesn't be printed. Then we decrease position to force this function to be printed next time, in next read buffer. Another little fix is to show correct allocating pages count. Signed-off-by: walimis Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ftrace.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 14fa52297b28..e60205722d0c 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -673,7 +673,7 @@ static int __init ftrace_dyn_table_alloc(unsigned long num_to_init) cnt = num_to_init / ENTRIES_PER_PAGE; pr_info("ftrace: allocating %ld entries in %d pages\n", - num_to_init, cnt); + num_to_init, cnt + 1); for (i = 0; i < cnt; i++) { pg->next = (void *)get_zeroed_page(GFP_KERNEL); @@ -753,13 +753,11 @@ static void *t_start(struct seq_file *m, loff_t *pos) void *p = NULL; loff_t l = -1; - if (*pos != iter->pos) { - for (p = t_next(m, p, &l); p && l < *pos; p = t_next(m, p, &l)) - ; - } else { - l = *pos; - p = t_next(m, p, &l); - } + if (*pos > iter->pos) + *pos = iter->pos; + + l = *pos; + p = t_next(m, p, &l); return p; } @@ -770,15 +768,21 @@ static void t_stop(struct seq_file *m, void *p) static int t_show(struct seq_file *m, void *v) { + struct ftrace_iterator *iter = m->private; struct dyn_ftrace *rec = v; char str[KSYM_SYMBOL_LEN]; + int ret = 0; if (!rec) return 0; kallsyms_lookup(rec->ip, NULL, NULL, NULL, str); - seq_printf(m, "%s\n", str); + ret = seq_printf(m, "%s\n", str); + if (ret < 0) { + iter->pos--; + iter->idx--; + } return 0; } @@ -804,7 +808,7 @@ ftrace_avail_open(struct inode *inode, struct file *file) return -ENOMEM; iter->pg = ftrace_pages_start; - iter->pos = -1; + iter->pos = 0; ret = seq_open(file, &show_ftrace_seq_ops); if (!ret) { @@ -891,7 +895,7 @@ ftrace_regex_open(struct inode *inode, struct file *file, int enable) if (file->f_mode & FMODE_READ) { iter->pg = ftrace_pages_start; - iter->pos = -1; + iter->pos = 0; iter->flags = enable ? FTRACE_ITER_FILTER : FTRACE_ITER_NOTRACE; -- cgit v1.2.3 From 38cd809e675e29ea1c3bce8ed743b0fe8aa10eea Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Sat, 15 Nov 2008 23:41:56 +0800 Subject: [ARM] pxa: fix I2C controller device being registered twice on Akita Signed-off-by: Eric Miao Cc: Richard Purdie --- arch/arm/mach-pxa/spitz.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index f0a5bbae0b45..51db9527f176 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -686,7 +686,6 @@ static void __init akita_init(void) spitz_pcmcia_config.num_devs = 1; platform_scoop_config = &spitz_pcmcia_config; - pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info)); common_init(); -- cgit v1.2.3 From faf2f0ab13d259f2386d156d24c405ec8cee30ff Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Sun, 16 Nov 2008 15:56:58 +0800 Subject: [ARM] pxa: fix incorrect PCMCIA PSKTSEL pin configuration for spitz The original incorrect configuration caused GPIO79_nCS_3 being overriden, thus resulted in the NAND flash not being detected. The real PSKTSEL pin is on GPIO104 instead of GPIO79. Signed-off-by: Eric Miao Cc: Richard Purdie --- arch/arm/mach-pxa/spitz.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 51db9527f176..3be76ee2bdbf 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -67,6 +67,7 @@ static unsigned long spitz_pin_config[] __initdata = { /* Chip Selects */ GPIO78_nCS_2, /* SCOOP #2 */ + GPIO79_nCS_3, /* NAND */ GPIO80_nCS_4, /* SCOOP #1 */ /* LCD - 16bpp Active TFT */ @@ -97,10 +98,10 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO51_nPIOW, GPIO85_nPCE_1, GPIO54_nPCE_2, - GPIO79_PSKTSEL, GPIO55_nPREG, GPIO56_nPWAIT, GPIO57_nIOIS16, + GPIO104_PSKTSEL, /* MMC */ GPIO32_MMC_CLK, -- cgit v1.2.3 From 5f5c4bdb144bf285727867bbd75c13c5a99150c9 Mon Sep 17 00:00:00 2001 From: Joey Zhuo Date: Sun, 16 Nov 2008 00:39:35 -0800 Subject: via-velocity: enable perfect filtering for multicast packets Signed-off-by: Joey Zhuo Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/via-velocity.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 3590ea5a902d..11cb3e504e1c 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2296,7 +2296,7 @@ static void velocity_set_multi(struct net_device *dev) } mac_set_cam_mask(regs, vptr->mCAMmask); - rx_mode = (RCR_AM | RCR_AB); + rx_mode = RCR_AM | RCR_AB | RCR_AP; } if (dev->mtu > 1500) rx_mode |= RCR_AL; -- cgit v1.2.3 From d3c6aa1e69f705ac3ab64584101b1d38435b1353 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 16 Nov 2008 00:49:31 -0800 Subject: x86: fix es7000 compiling Impact: fix es7000 build CC arch/x86/kernel/es7000_32.o arch/x86/kernel/es7000_32.c: In function find_unisys_acpi_oem_table: arch/x86/kernel/es7000_32.c:255: error: implicit declaration of function acpi_get_table_with_size arch/x86/kernel/es7000_32.c:261: error: implicit declaration of function early_acpi_os_unmap_memory arch/x86/kernel/es7000_32.c: In function unmap_unisys_acpi_oem_table: arch/x86/kernel/es7000_32.c:277: error: implicit declaration of function __acpi_unmap_table make[1]: *** [arch/x86/kernel/es7000_32.o] Error 1 we applied one patch out of order... | commit a73aaedd95703bd49f4c3f9df06fb7b7373ba905 | Author: Yinghai Lu | Date: Sun Sep 14 02:33:14 2008 -0700 | | x86: check dsdt before find oem table for es7000, v2 | | v2: use __acpi_unmap_table() that patch need: x86: use early_ioremap in __acpi_map_table x86: always explicitly map acpi memory acpi: remove final __acpi_map_table mapping before setting acpi_gbl_permanent_mmap acpi/x86: introduce __apci_map_table, v4 submitted to the ACPI tree but not upstream yet. fix it until those patches applied, need to revert this one Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/es7000_32.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c index f454c78fcef6..0aa2c443d600 100644 --- a/arch/x86/kernel/es7000_32.c +++ b/arch/x86/kernel/es7000_32.c @@ -250,31 +250,24 @@ int __init find_unisys_acpi_oem_table(unsigned long *oem_addr) { struct acpi_table_header *header = NULL; int i = 0; - acpi_size tbl_size; - while (ACPI_SUCCESS(acpi_get_table_with_size("OEM1", i++, &header, &tbl_size))) { + while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) { if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) { struct oem_table *t = (struct oem_table *)header; oem_addrX = t->OEMTableAddr; oem_size = t->OEMTableSize; - early_acpi_os_unmap_memory(header, tbl_size); *oem_addr = (unsigned long)__acpi_map_table(oem_addrX, oem_size); return 0; } - early_acpi_os_unmap_memory(header, tbl_size); } return -1; } void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr) { - if (!oem_addr) - return; - - __acpi_unmap_table((char *)oem_addr, oem_size); } #endif -- cgit v1.2.3 From 6ff68026f4757d68461b7fbeca5c944e1f5f8b44 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Wed, 12 Nov 2008 09:52:32 +0000 Subject: e1000e: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ethtool.c | 8 ++++++-- drivers/net/e1000e/netdev.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 70c11c811a08..62421ce96311 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1713,7 +1713,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->supported = 0; wol->wolopts = 0; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return; wol->supported = WAKE_UCAST | WAKE_MCAST | @@ -1751,7 +1752,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_MAGICSECURE) return -EOPNOTSUPP; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; /* these settings will always override what we currently have */ @@ -1770,6 +1772,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_ARP) adapter->wol |= E1000_WUFC_ARP; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index abd492b7336d..2c8dffdc889f 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4970,6 +4970,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ e1000e_reset(adapter); -- cgit v1.2.3 From de1264896c8012a261c1cba17e6a61199c276ad3 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Fri, 7 Nov 2008 20:30:19 +0000 Subject: e1000: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_ethtool.c | 8 ++++++-- drivers/net/e1000/e1000_main.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6a3893acfe04..c854c96f5ab3 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1774,7 +1774,8 @@ static void e1000_get_wol(struct net_device *netdev, /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1811,7 +1812,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1838,6 +1840,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index fac82152e4c8..872799b746f5 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1179,6 +1179,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* print bus type/speed/width info */ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ", -- cgit v1.2.3 From e1b86d8479f90aadee57a3d07d8e61c815c202d9 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Fri, 7 Nov 2008 20:30:37 +0000 Subject: igb: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using igb_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_ethtool.c | 8 ++++++-- drivers/net/igb/igb_main.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 58906c984be9..89964fa739a0 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1776,7 +1776,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1805,7 +1806,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1825,6 +1827,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1f397cd99414..0a9801516ae0 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1244,6 +1244,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ igb_reset(adapter); -- cgit v1.2.3 From 0f807044980dd51fdf9aa2df8d503d4757501b20 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Tue, 11 Nov 2008 07:54:54 +0000 Subject: qla3xxx: Cleanup: Fix link print statements. Removed debug print statements and improved conditionals around informational statements. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qla3xxx.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 3cdd07c45b6d..508452c02151 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -1515,9 +1515,6 @@ static u32 ql_get_link_state(struct ql3_adapter *qdev) linkState = LS_UP; } else { linkState = LS_DOWN; - if (netif_msg_link(qdev)) - printk(KERN_WARNING PFX - "%s: Link is down.\n", qdev->ndev->name); } return linkState; } @@ -1581,10 +1578,6 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev) ql_mac_enable(qdev, 1); } - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: Change port_link_state LS_DOWN to LS_UP.\n", - qdev->ndev->name); qdev->port_link_state = LS_UP; netif_start_queue(qdev->ndev); netif_carrier_on(qdev->ndev); @@ -1655,14 +1648,9 @@ static void ql_link_state_machine_work(struct work_struct *work) /* Fall Through */ case LS_DOWN: - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: port_link_state = LS_DOWN.\n", - qdev->ndev->name); if (curr_link_state == LS_UP) { if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: curr_link_state = LS_UP.\n", + printk(KERN_INFO PFX "%s: Link is up.\n", qdev->ndev->name); if (ql_is_auto_neg_complete(qdev)) ql_finish_auto_neg(qdev); @@ -1670,6 +1658,7 @@ static void ql_link_state_machine_work(struct work_struct *work) if (qdev->port_link_state == LS_UP) ql_link_down_detect_clear(qdev); + qdev->port_link_state = LS_UP; } break; @@ -1678,12 +1667,14 @@ static void ql_link_state_machine_work(struct work_struct *work) * See if the link is currently down or went down and came * back up */ - if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) { + if (curr_link_state == LS_DOWN) { if (netif_msg_link(qdev)) printk(KERN_INFO PFX "%s: Link is down.\n", qdev->ndev->name); qdev->port_link_state = LS_DOWN; } + if (ql_link_down_detect(qdev)) + qdev->port_link_state = LS_DOWN; break; } spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); -- cgit v1.2.3 From ac450208dea8cf1b9aa8feabd06a7209a282d749 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 13 Nov 2008 06:20:10 +0000 Subject: igb: use dev_printk instead of printk Use dev_printk() instead of printk() to give a little more context and use consistent format. Signed-off-by: Bjorn Helgaas Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 0a9801516ae0..1cbae85b1426 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1019,10 +1019,9 @@ static int __devinit igb_probe(struct pci_dev *pdev, state &= ~PCIE_LINK_STATE_L0S; pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL, state); - printk(KERN_INFO "Disabling ASPM L0s upstream switch " - "port %x:%x.%x\n", us_dev->bus->number, - PCI_SLOT(us_dev->devfn), - PCI_FUNC(us_dev->devfn)); + dev_info(&pdev->dev, + "Disabling ASPM L0s upstream switch port %s\n", + pci_name(us_dev)); } default: break; -- cgit v1.2.3 From 773c9c1f77174429ad2feb1735a3beb33ff3b6c0 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 14 Nov 2008 13:51:54 +0000 Subject: e100: fix dma error in direction for mapping The e100 driver triggers BUG_ON(buf->direction != dir) by doing pci_map_single(..., PCI_DMA_BIDIRECTIONAL) and pci_dma_sync_single_for_device(..., PCI_DMA_TODEVICE). Changing the DMA direction, especially with dmabounce will result in unexpected behaviour. Reported-by: Anders Grafstrom Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e100.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 3d69fae781cf..e8bfcce6b319 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -166,7 +166,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.23-k4"DRV_EXT +#define DRV_VERSION "3.5.23-k6"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " @@ -1804,7 +1804,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data; put_unaligned_le32(rx->dma_addr, &prev_rfd->link); pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); } return 0; @@ -1823,7 +1823,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Need to sync before taking a peek at cb_complete bit */ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_FROMDEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); rfd_status = le16_to_cpu(rfd->status); DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status); @@ -1850,7 +1850,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Get data */ pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); /* If this buffer has the el bit, but we think the receiver * is still running, check to see if it really stopped while @@ -1943,7 +1943,7 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, new_before_last_rfd->command |= cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, new_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); /* Now that we have a new stopping point, we can clear the old * stopping point. We must sync twice to get the proper @@ -1951,11 +1951,11 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, old_before_last_rfd->command &= ~cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); } if(restart_required) { @@ -1978,7 +1978,7 @@ static void e100_rx_clean_list(struct nic *nic) for(rx = nic->rxs, i = 0; i < count; rx++, i++) { if(rx->skb) { pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); dev_kfree_skb(rx->skb); } } @@ -2021,7 +2021,7 @@ static int e100_rx_alloc_list(struct nic *nic) before_last->command |= cpu_to_le16(cb_el); before_last->size = 0; pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); nic->rx_to_use = nic->rx_to_clean = nic->rxs; nic->ru_running = RU_SUSPENDED; @@ -2222,7 +2222,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) msleep(10); pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd), skb->data, ETH_DATA_LEN)) -- cgit v1.2.3 From 3ee82383f0098a2e13acc8cf1be8e47512f41e5a Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Thu, 13 Nov 2008 21:53:13 +0000 Subject: phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. Signed-off-by: Giulio Benetti Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e11b03b2b25a..8fb1faca883a 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,8 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs, there is no device there */ - if (0xffffffff == phy_id) + /* If the phy_id is all Fs or all 0s, there is no device there */ + if ((0xffff == phy_id) || (0x00 == phy_id)) return NULL; dev = phy_device_create(bus, addr, phy_id); -- cgit v1.2.3 From 2a3a59e5c977654d3aad5bc11cc0aca2303a7f44 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 11 Nov 2008 13:42:35 -0600 Subject: [SCSI] Fix hang in starved list processing Close possible infinite loop with interrupts off when devices are added back to the starved list. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11898 Reported-by: Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index f5d3b96890dc..fa45a1a66867 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -567,15 +567,18 @@ static inline int scsi_host_is_busy(struct Scsi_Host *shost) */ static void scsi_run_queue(struct request_queue *q) { - struct scsi_device *starved_head = NULL, *sdev = q->queuedata; + struct scsi_device *sdev = q->queuedata; struct Scsi_Host *shost = sdev->host; + LIST_HEAD(starved_list); unsigned long flags; if (scsi_target(sdev)->single_lun) scsi_single_lun_run(sdev); spin_lock_irqsave(shost->host_lock, flags); - while (!list_empty(&shost->starved_list) && !scsi_host_is_busy(shost)) { + list_splice_init(&shost->starved_list, &starved_list); + + while (!list_empty(&starved_list)) { int flagset; /* @@ -588,24 +591,18 @@ static void scsi_run_queue(struct request_queue *q) * scsi_request_fn must get the host_lock before checking * or modifying starved_list or starved_entry. */ - sdev = list_entry(shost->starved_list.next, - struct scsi_device, starved_entry); - /* - * The *queue_ready functions can add a device back onto the - * starved list's tail, so we must check for a infinite loop. - */ - if (sdev == starved_head) + if (scsi_host_is_busy(shost)) break; - if (!starved_head) - starved_head = sdev; + sdev = list_entry(starved_list.next, + struct scsi_device, starved_entry); + list_del_init(&sdev->starved_entry); if (scsi_target_is_busy(scsi_target(sdev))) { list_move_tail(&sdev->starved_entry, &shost->starved_list); continue; } - list_del_init(&sdev->starved_entry); spin_unlock(shost->host_lock); spin_lock(sdev->request_queue->queue_lock); @@ -621,6 +618,8 @@ static void scsi_run_queue(struct request_queue *q) spin_lock(shost->host_lock); } + /* put any unprocessed entries back */ + list_splice(&starved_list, &shost->starved_list); spin_unlock_irqrestore(shost->host_lock, flags); blk_run_queue(q); -- cgit v1.2.3 From 77fb61a04a0483ad274ce5c51b02c46c12db3693 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 16 Nov 2008 10:09:34 -0800 Subject: acpi: fix oops in acpi_system_wakeup_device_seq_show MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 0794469da3f7b2093575cbdfc1108308dd3641ce: ("ACPI: struct device - replace bus_id with dev_name(), dev_set_name()") introduced a bug by testing 'dev_name(ldev)' instead of 'ldev->bus' for NULL when printing out the bus information. So if ldev->bus was NULL, we'd oops. Reported-and-tested-by: Bruno Prmont Cc: Kay Sievers Cc: Len Brown Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/acpi/sleep/proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 64e591ba86f2..4dbc2271acf5 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -366,7 +366,7 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) dev->wakeup.state.enabled ? "enabled" : "disabled"); if (ldev) seq_printf(seq, "%s:%s", - dev_name(ldev) ? ldev->bus->name : "no-bus", + ldev->bus ? ldev->bus->name : "no-bus", dev_name(ldev)); seq_printf(seq, "\n"); put_device(ldev); -- cgit v1.2.3 From b1ccbdc4a2af5ffcd6082c3a7a6fbd0e134031f2 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sat, 8 Nov 2008 01:28:19 +0100 Subject: mfd: fix event masking for da9030 Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Samuel Ortiz --- drivers/mfd/da903x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index b57326ae464d..0b5bd85dfcec 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -267,7 +267,7 @@ static int da9030_mask_events(struct da903x_chip *chip, unsigned int events) { uint8_t v[3]; - chip->events_mask &= ~events; + chip->events_mask |= events; v[0] = (chip->events_mask & 0xff); v[1] = (chip->events_mask >> 8) & 0xff; -- cgit v1.2.3 From 898d8054ec0cb5ba0ec1b15c78042a23ed103c02 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 12 Nov 2008 17:34:02 +0100 Subject: mfd: Correct WM8350 I2C return code usage The vendor BSP used for the WM8350 development provided an I2C driver which incorrectly returned zero on succesful sends rather than the number of transmitted bytes, an error which was then propagated into the WM8350 I2C accessors. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-i2c.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c index 8dfe21bb3bd1..3e0ce0e50ea2 100644 --- a/drivers/mfd/wm8350-i2c.c +++ b/drivers/mfd/wm8350-i2c.c @@ -30,7 +30,12 @@ static int wm8350_i2c_read_device(struct wm8350 *wm8350, char reg, ret = i2c_master_send(wm8350->i2c_client, ®, 1); if (ret < 0) return ret; - return i2c_master_recv(wm8350->i2c_client, dest, bytes); + ret = i2c_master_recv(wm8350->i2c_client, dest, bytes); + if (ret < 0) + return ret; + if (ret != bytes) + return -EIO; + return 0; } static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, @@ -38,13 +43,19 @@ static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, { /* we add 1 byte for device register */ u8 msg[(WM8350_MAX_REGISTER << 1) + 1]; + int ret; if (bytes > ((WM8350_MAX_REGISTER << 1) + 1)) return -EINVAL; msg[0] = reg; memcpy(&msg[1], src, bytes); - return i2c_master_send(wm8350->i2c_client, msg, bytes + 1); + ret = i2c_master_send(wm8350->i2c_client, msg, bytes + 1); + if (ret < 0) + return ret; + if (ret != bytes + 1) + return -EIO; + return 0; } static int wm8350_i2c_probe(struct i2c_client *i2c, -- cgit v1.2.3 From 5c06fe772da43db63b053addcd2c267f76d0be91 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 16 Nov 2008 22:19:10 +0000 Subject: Fix broken ownership of /proc/sys/ files D'oh... Signed-off-by: Al Viro Reported-and-tested-by: Peter Palfrader Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/proc/proc_sysctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c index 94fcfff6863a..06ed10b7da9e 100644 --- a/fs/proc/proc_sysctl.c +++ b/fs/proc/proc_sysctl.c @@ -31,6 +31,7 @@ static struct inode *proc_sys_make_inode(struct super_block *sb, inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; inode->i_flags |= S_PRIVATE; /* tell selinux to ignore this inode */ inode->i_mode = table->mode; + inode->i_uid = inode->i_gid = 0; if (!table->child) { inode->i_mode |= S_IFREG; inode->i_op = &proc_sys_inode_operations; -- cgit v1.2.3 From e14c8bf86350f6c39186a139c5c584a6111b2f01 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 17 Nov 2008 08:22:18 +1030 Subject: stop_machine: fix race with return value (fixes Bug #11989) Bug #11989: Suspend failure on NForce4-based boards due to chanes in stop_machine We should not access active.fnret outside the lock; in theory the next stop_machine could overwrite it. Signed-off-by: Rusty Russell Tested-by: "Rafael J. Wysocki" Signed-off-by: Linus Torvalds --- kernel/stop_machine.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index 9bc4c00872c9..24e8ceacc388 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -112,7 +112,7 @@ static int chill(void *unused) int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) { struct work_struct *sm_work; - int i; + int i, ret; /* Set up initial state. */ mutex_lock(&lock); @@ -137,8 +137,9 @@ int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) /* This will release the thread on our CPU. */ put_cpu(); flush_workqueue(stop_machine_wq); + ret = active.fnret; mutex_unlock(&lock); - return active.fnret; + return ret; } int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) -- cgit v1.2.3 From 72eb8c6747b49e41fd2b042510f03ac7c13426fc Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 17 Nov 2008 00:30:57 +0100 Subject: unitialized return value in mm/mlock.c: __mlock_vma_pages_range() Fix an unitialized return value when compiling on parisc (with CONFIG_UNEVICTABLE_LRU=y): mm/mlock.c: In function `__mlock_vma_pages_range': mm/mlock.c:165: warning: `ret' might be used uninitialized in this function Signed-off-by: Helge Deller [ It isn't ever really used uninitialized, since no caller should ever call this function with an empty range. But the compiler is correct that from a local analysis standpoint that is impossible to see, and fixing the warning is appropriate. ] Signed-off-by: Linus Torvalds --- mm/mlock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mlock.c b/mm/mlock.c index a6da2aee940a..1ada366570cb 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -162,7 +162,7 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma, unsigned long addr = start; struct page *pages[16]; /* 16 gives a reasonable batch */ int nr_pages = (end - start) / PAGE_SIZE; - int ret; + int ret = 0; int gup_flags = 0; VM_BUG_ON(start & ~PAGE_MASK); -- cgit v1.2.3 From 5181e594512faeac7d7fd9620ce91105f45bf643 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 17 Nov 2008 01:44:38 +0100 Subject: HID: fix blacklist entries for greenasia/pantherlord Fix misplaced quirk entries for devices driven by hid-pl driver. The devices shouls be only blacklisted by generic HID driver, not completely ignored. Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 147ec591a806..69b1ce800f72 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1266,6 +1266,8 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, @@ -1420,7 +1422,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) }, { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) }, { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) }, @@ -1436,7 +1437,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2) }, { HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GRETAGMACBETH, USB_DEVICE_ID_GRETAGMACBETH_HUEY) }, { HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB) }, -- cgit v1.2.3 From d7c31a1e754b5140eefeeb10c3c3be17f3702452 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Tue, 11 Nov 2008 23:27:59 -0300 Subject: V4L/DVB (9601): ttusb_dec: Add NULL pointer validation Added validation for NULL pointer Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttusb-dec/ttusb_dec.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index ab33fec8a19f..c1386e9b13d3 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1157,6 +1157,12 @@ static int ttusb_dec_alloc_iso_urbs(struct ttusb_dec *dec) ISO_BUF_COUNT), &dec->iso_dma_handle); + if (!dec->iso_buffer) { + dprintk("%s: pci_alloc_consistent - not enough memory\n", + __func__); + return -ENOMEM; + } + memset(dec->iso_buffer, 0, ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * ISO_BUF_COUNT)); -- cgit v1.2.3 From 11eb260a70b992b83fa2d15bb777cda3ee326c05 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Tue, 11 Nov 2008 23:30:49 -0300 Subject: V4L/DVB (9602): dvb-ttusb-budget: Add NULL pointer validation Added validation for NULL pointer Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 66ab0c6e9783..5faeee3f70bf 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -808,6 +808,12 @@ static int ttusb_alloc_iso_urbs(struct ttusb *ttusb) ISO_BUF_COUNT, &ttusb->iso_dma_handle); + if (!ttusb->iso_buffer) { + dprintk("%s: pci_alloc_consistent - not enough memory\n", + __func__); + return -ENOMEM; + } + memset(ttusb->iso_buffer, 0, ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT); -- cgit v1.2.3 From b7ed785b5f6a8dbdbd0cf8688a51c42e35205a4e Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Tue, 11 Nov 2008 23:37:39 -0300 Subject: V4L/DVB (9603): dvb-ttusb-budget: Add validation for ttusb_alloc_iso_urbs Added validation for ttusb_alloc_iso_urbs Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 5faeee3f70bf..4a3f2b8ea37d 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -1665,7 +1665,14 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i ttusb_setup_interfaces(ttusb); - ttusb_alloc_iso_urbs(ttusb); + result = ttusb_alloc_iso_urbs(ttusb); + if (result < 0) { + dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__); + mutex_unlock(&ttusb->semi2c); + kfree(ttusb); + return result; + } + if (ttusb_init_controller(ttusb)) printk("ttusb_init_controller: error\n"); -- cgit v1.2.3 From 7935eeae793ff24e2d6053a9df63be71323ad634 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Tue, 11 Nov 2008 23:47:57 -0300 Subject: V4L/DVB (9604): ttusb_dec: fix memory leak Free allocated memory Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttusb-dec/ttusb_dec.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index c1386e9b13d3..0aa96df80fc2 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1260,6 +1260,7 @@ static int ttusb_dec_init_usb(struct ttusb_dec *dec) dec->irq_buffer = usb_buffer_alloc(dec->udev,IRQ_PACKET_SIZE, GFP_ATOMIC, &dec->irq_dma_handle); if(!dec->irq_buffer) { + usb_free_urb(dec->irq_urb); return -ENOMEM; } usb_fill_int_urb(dec->irq_urb, dec->udev,dec->irq_pipe, -- cgit v1.2.3 From 4faf1004c32819035c5325879a466f27e189feb5 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Tue, 11 Nov 2008 23:56:56 -0300 Subject: V4L/DVB (9605): usb-urb: fix memory leak Free allocated memory Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/usb-urb.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c index 397f51a7b2ad..da93b9e982c0 100644 --- a/drivers/media/dvb/dvb-usb/usb-urb.c +++ b/drivers/media/dvb/dvb-usb/usb-urb.c @@ -135,7 +135,7 @@ stream->buf_list[stream->buf_num], (long long)stream->dma_addr[stream->buf_num]) static int usb_bulk_urb_init(struct usb_data_stream *stream) { - int i; + int i, j; if ((i = usb_allocate_stream_buffers(stream,stream->props.count, stream->props.u.bulk.buffersize)) < 0) @@ -143,9 +143,13 @@ static int usb_bulk_urb_init(struct usb_data_stream *stream) /* allocate the URBs */ for (i = 0; i < stream->props.count; i++) { - if ((stream->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC)) == NULL) + stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); + if (!stream->urb_list[i]) { + deb_mem("not enough memory for urb_alloc_urb!.\n"); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[i]); return -ENOMEM; - + } usb_fill_bulk_urb( stream->urb_list[i], stream->udev, usb_rcvbulkpipe(stream->udev,stream->props.endpoint), stream->buf_list[i], @@ -170,9 +174,14 @@ static int usb_isoc_urb_init(struct usb_data_stream *stream) for (i = 0; i < stream->props.count; i++) { struct urb *urb; int frame_offset = 0; - if ((stream->urb_list[i] = - usb_alloc_urb(stream->props.u.isoc.framesperurb,GFP_ATOMIC)) == NULL) + + stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC); + if (!stream->urb_list[i]) { + deb_mem("not enough memory for urb_alloc_urb!\n"); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[i]); return -ENOMEM; + } urb = stream->urb_list[i]; -- cgit v1.2.3 From df4533af7f45e87a4be470502fa3cea2f6c96da9 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Tue, 11 Nov 2008 18:09:28 -0300 Subject: V4L/DVB (9608): Fix section mismatch warning for dm1105 during make -- Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dm1105/dm1105.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c index 14e627ef6465..c1d92f838ca8 100644 --- a/drivers/media/dvb/dm1105/dm1105.c +++ b/drivers/media/dvb/dm1105/dm1105.c @@ -376,7 +376,7 @@ static void dm1105dvb_dma_unmap(struct dm1105dvb *dm1105dvb) pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr); } -static void __devinit dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb) +static void dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb) { outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK)); outb(1, dm_io_mem(DM1105_CR)); -- cgit v1.2.3 From c41109fc9a13c6af0e4069dd92fdb4c5c8046649 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 15 Nov 2008 23:44:14 -0300 Subject: V4L/DVB (9627): em28xx: Avoid i2c register error for boards without eeprom Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-i2c.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 3bab56b997fc..2360c61ddca9 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -337,9 +337,9 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) /* Check if board has eeprom */ err = i2c_master_recv(&dev->i2c_client, &buf, 0); if (err < 0) { - em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n", - __func__, err); - return err; + em28xx_errdev("board has no eeprom\n"); + memset(eedata, 0, len); + return -ENODEV; } buf = 0; @@ -609,14 +609,16 @@ int em28xx_i2c_register(struct em28xx *dev) dev->i2c_client.adapter = &dev->i2c_adap; retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata)); - if (retval < 0) { + if ((retval < 0) && (retval != -ENODEV)) { em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n", __func__, retval); + return retval; } if (i2c_scan) em28xx_do_i2c_scan(dev); + return 0; } -- cgit v1.2.3 From 3fa37deb1a287e100c7db5b4f964784fd664bee9 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sun, 16 Nov 2008 00:33:32 -0300 Subject: V4L/DVB (9631): Make s2api work for ATSC support ATSC should be considered a legacy delivery system, or else fields such as p->u.vsb.modulation do not get populated (resulting in set_frontend failures) Cc: Steven Toth Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 8557bf12cfb4..b38cebe3ac1c 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -934,7 +934,8 @@ void dtv_property_dump(struct dtv_property *tvp) int is_legacy_delivery_system(fe_delivery_system_t s) { if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) || - (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS)) + (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS) || + (s == SYS_ATSC)) return 1; return 0; -- cgit v1.2.3 From 3f9b46c154da5ec4facca88f82d1820eb329fd3e Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sat, 15 Nov 2008 17:16:11 -0300 Subject: V4L/DVB (9632): make em28xx aux audio input work The attached patch makes the em28xx auxillary audio input work. Tested with the HVR-950. em28xx: make auxillary audio input work The tuner audio input was working but the aux input wasn't. Tested with the HVR-950. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 5d837c16ee22..038da614a734 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -270,6 +270,8 @@ static int em28xx_set_audio_source(struct em28xx *dev) break; case EM28XX_AMUX_LINE_IN: input = EM28XX_AUDIO_SRC_LINE; + video = disable; + line = enable; break; case EM28XX_AMUX_AC97_VIDEO: input = EM28XX_AUDIO_SRC_LINE; -- cgit v1.2.3 From 41286d972530b7a47acb48376d714b6b121a6c22 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sun, 16 Nov 2008 00:44:52 -0300 Subject: V4L/DVB (9634): Make sure the i2c gate is open before powering down tuner It is not safe to assume that the i2c gate will be open before issuing the command to power down the tuner. In fact, many demods only open the gate long enough to issue the tuning command. This fix allows power management to work properly for those tuners behind an i2c gate (in my case the problem was with the HVR-950Q) Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index b38cebe3ac1c..7a421e9dba5a 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -585,6 +585,8 @@ restart: if (fe->ops.set_voltage) fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF); if (fe->ops.tuner_ops.sleep) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); fe->ops.tuner_ops.sleep(fe); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); -- cgit v1.2.3 From deaf53e3c8e717169669ee6c2594b5c33d1af93b Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sat, 15 Nov 2008 01:10:14 -0300 Subject: V4L/DVB (9635): v4l: s2255drv fix firmware test on big-endian Noticed by sparse: drivers/media/video/s2255drv.c:2531:6: warning: restricted __le32 degrades to integer Cc: Dean Anderson Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s2255drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 5272926db73e..3c3f8cf73108 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -192,7 +192,7 @@ struct s2255_dmaqueue { #define S2255_FW_FAILED 3 #define S2255_FW_DISCONNECTING 4 -#define S2255_FW_MARKER 0x22552f2f +#define S2255_FW_MARKER cpu_to_le32(0x22552f2f) /* 2255 read states */ #define S2255_READ_IDLE 0 #define S2255_READ_FRAME 1 -- cgit v1.2.3 From 99afb989b05b9fb1c7b3831ce4b7a000b214acdb Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sat, 15 Nov 2008 07:13:07 -0300 Subject: V4L/DVB (9639): Make dib0700 remote control support work with firmware v1.20 The format for reading the IR controller changed in firmware 1.20. It now provides the events on bulk endpoint 1 instead of using a control request. Support the new format, providing backward compatibility for users who might be using older firmware. Thanks to Patrick Boettcher for providing the required information on how the version 1.20 firmware works. Signed-off-by: Devin Heitmueller Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700.h | 5 +- drivers/media/dvb/dvb-usb/dib0700_core.c | 16 ++++ drivers/media/dvb/dvb-usb/dib0700_devices.c | 139 +++++++++++++++++++++++++++- 3 files changed, 158 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index 739193943c17..8b544fe79b0d 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -22,7 +22,7 @@ extern int dvb_usb_dib0700_debug; #define REQUEST_I2C_READ 0x2 #define REQUEST_I2C_WRITE 0x3 -#define REQUEST_POLL_RC 0x4 +#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */ #define REQUEST_JUMPRAM 0x8 #define REQUEST_SET_CLOCK 0xB #define REQUEST_SET_GPIO 0xC @@ -40,11 +40,14 @@ struct dib0700_state { u16 mt2060_if1[2]; u8 rc_toggle; u8 rc_counter; + u8 rc_func_version; u8 is_dib7000pc; u8 fw_use_new_i2c_api; u8 disable_streaming_master_mode; }; +extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, + u32 *romversion, u32 *ramversion, u32 *fwtype); extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3); extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen); diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index dd53cee3896d..200b215f4d8b 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -19,6 +19,22 @@ MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (defau DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, + u32 *romversion, u32 *ramversion, u32 *fwtype) +{ + u8 b[16]; + int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), + REQUEST_GET_VERSION, + USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + b, sizeof(b), USB_CTRL_GET_TIMEOUT); + *hwversion = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3]; + *romversion = (b[4] << 24) | (b[5] << 16) | (b[6] << 8) | b[7]; + *ramversion = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11]; + *fwtype = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15]; + return ret; +} + /* expecting rx buffer: request data[0] data[1] ... data[2] */ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen) { diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 0cfccc24b190..f28d3ae59e04 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -38,6 +38,7 @@ static struct mt2060_config bristol_mt2060_config[2] = { } }; + static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { .band_caps = BAND_VHF | BAND_UHF, .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), @@ -451,8 +452,13 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; /* Number of keypresses to ignore before start repeating */ #define RC_REPEAT_DELAY 2 +#define RC_REPEAT_DELAY_V1_20 5 -static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) + + +/* Used by firmware versions < 1.20 (deprecated) */ +static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event, + int *state) { u8 key[4]; int i; @@ -529,6 +535,137 @@ static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) return 0; } +/* This is the structure of the RC response packet starting in firmware 1.20 */ +struct dib0700_rc_response { + u8 report_id; + u8 data_state; + u8 system_msb; + u8 system_lsb; + u8 data; + u8 not_data; +}; + +/* This supports the new IR response format for firmware v1.20 */ +static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event, + int *state) +{ + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + struct dib0700_state *st = d->priv; + struct dib0700_rc_response poll_reply; + u8 buf[6]; + int i; + int status; + int actlen; + int found = 0; + + /* Set initial results in case we exit the function early */ + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + /* Firmware v1.20 provides RC data via bulk endpoint 1 */ + status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf, + sizeof(buf), &actlen, 50); + if (status < 0) { + /* No data available (meaning no key press) */ + return 0; + } + + if (actlen != sizeof(buf)) { + /* We didn't get back the 6 byte message we expected */ + err("Unexpected RC response size [%d]", actlen); + return -1; + } + + poll_reply.report_id = buf[0]; + poll_reply.data_state = buf[1]; + poll_reply.system_msb = buf[2]; + poll_reply.system_lsb = buf[3]; + poll_reply.data = buf[4]; + poll_reply.not_data = buf[5]; + + /* + info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n", + poll_reply.report_id, poll_reply.data_state, + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + */ + + if ((poll_reply.data + poll_reply.not_data) != 0xff) { + /* Key failed integrity check */ + err("key failed integrity check: %02x %02x %02x %02x", + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + return -1; + } + + /* Find the key in the map */ + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == poll_reply.system_lsb && + keymap[i].data == poll_reply.data) { + *event = keymap[i].event; + found = 1; + break; + } + } + + if (found == 0) { + err("Unknown remote controller key: %02x %02x %02x %02x", + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + d->last_event = 0; + return 0; + } + + if (poll_reply.data_state == 1) { + /* New key hit */ + st->rc_counter = 0; + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + d->last_event = keymap[i].event; + } else if (poll_reply.data_state == 2) { + /* Key repeated */ + st->rc_counter++; + + /* prevents unwanted double hits */ + if (st->rc_counter > RC_REPEAT_DELAY_V1_20) { + *event = d->last_event; + *state = REMOTE_KEY_PRESSED; + st->rc_counter = RC_REPEAT_DELAY_V1_20; + } + } else { + err("Unknown data state [%d]", poll_reply.data_state); + } + + return 0; +} + +static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + struct dib0700_state *st = d->priv; + + /* Because some people may have improperly named firmware files, + let's figure out whether to use the new firmware call or the legacy + call based on the firmware version embedded in the file */ + if (st->rc_func_version == 0) { + u32 hwver, romver, ramver, fwtype; + int ret = dib0700_get_version(d, &hwver, &romver, &ramver, + &fwtype); + if (ret < 0) { + err("Could not determine version info"); + return -1; + } + if (ramver < 0x10200) + st->rc_func_version = 1; + else + st->rc_func_version = 2; + } + + if (st->rc_func_version == 2) + return dib0700_rc_query_v1_20(d, event, state); + else + return dib0700_rc_query_legacy(d, event, state); +} + static struct dvb_usb_rc_key dib0700_rc_keys[] = { /* Key codes for the tiny Pinnacle remote*/ { 0x07, 0x00, KEY_MUTE }, -- cgit v1.2.3 From e82f54ba030b429c06b5240cbe7eeaaa03a8db11 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 14 Nov 2008 06:45:07 +0000 Subject: e1000e: fix warn_on reload after phy_id error If the driver fails to initialize the first time due to the failure in the phy_id check the kernel triggers a warn_on on the second try to load the driver because the driver did not free the msi/x resources in the first load because of the previous failure in phy_id check. Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 2c8dffdc889f..f6ebebb8cfa5 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -5009,6 +5009,7 @@ err_hw_init: err_sw_init: if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); + e1000e_reset_interrupt_capability(adapter); err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: -- cgit v1.2.3 From eb7c3adb1ca92450870dbb0d347fc986cd5e2af4 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 14 Nov 2008 06:45:23 +0000 Subject: e1000e: fix IPMI traffic Some users reported that they have machines with BMCs enabled that cannot receive IPMI traffic after e1000e is loaded. http://marc.info/?l=e1000-devel&m=121909039127414&w=2 http://marc.info/?l=e1000-devel&m=121365543823387&w=2 This fixes the issue if they load with the new parameter = 0 by disabling crc stripping, but leaves the performance feature on for most users. Based on work done by Hong Zhang. Signed-off-by: Jeff Kirsher Signed-off-by: Jesse Brandeburg Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 5 +++++ drivers/net/e1000e/netdev.c | 23 +++++++++++++++++++++-- drivers/net/e1000e/param.c | 25 +++++++++++++++++++++++++ 3 files changed, 51 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index c55de1c027af..c55fd6fdb91c 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -299,6 +299,7 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + unsigned int flags2; struct work_struct downshift_task; struct work_struct update_phy_task; }; @@ -306,6 +307,7 @@ struct e1000_adapter { struct e1000_info { enum e1000_mac_type mac; unsigned int flags; + unsigned int flags2; u32 pba; s32 (*get_variants)(struct e1000_adapter *); struct e1000_mac_operations *mac_ops; @@ -347,6 +349,9 @@ struct e1000_info { #define FLAG_RX_RESTART_NOW (1 << 30) #define FLAG_MSI_TEST_FAILED (1 << 31) +/* CRC Stripping defines */ +#define FLAG2_CRC_STRIPPING (1 << 0) + #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index f6ebebb8cfa5..91795f78c3e4 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -499,6 +499,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, goto next_desc; } + /* adjust length to remove Ethernet CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + length -= 4; + total_rx_bytes += length; total_rx_packets++; @@ -804,6 +808,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pci_dma_sync_single_for_device(pdev, ps_page->dma, PAGE_SIZE, PCI_DMA_FROMDEVICE); + /* remove the CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + l1 -= 4; + skb_put(skb, l1); goto copydone; } /* if */ @@ -825,6 +833,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb->truesize += length; } + /* strip the ethernet crc, problem is we're using pages now so + * this whole operation can get a little cpu intensive + */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + pskb_trim(skb, skb->len - 4); + copydone: total_rx_bytes += skb->len; total_rx_packets++; @@ -2301,8 +2315,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) else rctl |= E1000_RCTL_LPE; - /* Enable hardware CRC frame stripping */ - rctl |= E1000_RCTL_SECRC; + /* Some systems expect that the CRC is included in SMBUS traffic. The + * hardware strips the CRC before sending to both SMBUS (BMC) and to + * host memory when this is enabled + */ + if (adapter->flags2 & FLAG2_CRC_STRIPPING) + rctl |= E1000_RCTL_SECRC; /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; @@ -4766,6 +4784,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->ei = ei; adapter->pba = ei->pba; adapter->flags = ei->flags; + adapter->flags2 = ei->flags2; adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 77a3d7207a5f..e909f96698e8 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -151,6 +151,16 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); */ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); +/* + * Enable CRC Stripping + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \ + "the CRC"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -404,6 +414,21 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->flags |= FLAG_SMART_POWER_DOWN; } } + { /* CRC Stripping */ + const struct e1000_option opt = { + .type = enable_option, + .name = "CRC Stripping", + .err = "defaulting to enabled", + .def = OPTION_ENABLED + }; + + if (num_CrcStripping > bd) { + unsigned int crc_stripping = CrcStripping[bd]; + e1000_validate_option(&crc_stripping, &opt, adapter); + if (crc_stripping == OPTION_ENABLED) + adapter->flags2 |= FLAG2_CRC_STRIPPING; + } + } { /* Kumeran Lock Loss Workaround */ const struct e1000_option opt = { .type = enable_option, -- cgit v1.2.3 From f1987b44f642e96176adc88b7ce23a1d74806f89 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 15 Nov 2008 11:12:47 -0500 Subject: cifs: reinstate sharing of tree connections Use a similar approach to the SMB session sharing. Add a list of tcons attached to each SMB session. Move the refcount to non-atomic. Protect all of the above with the cifs_tcp_ses_lock. Add functions to properly find and put references to the tcons. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 236 ++++++++++++++++++++++++++++----------------------- fs/cifs/cifsfs.c | 8 +- fs/cifs/cifsglob.h | 13 +-- fs/cifs/cifssmb.c | 43 +++------- fs/cifs/connect.c | 93 +++++++++++++------- fs/cifs/misc.c | 74 ++++++++-------- 6 files changed, 249 insertions(+), 218 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 59841a68b0b6..1d6dfa8923ca 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -107,12 +107,13 @@ void cifs_dump_mids(struct TCP_Server_Info *server) #ifdef CONFIG_PROC_FS static int cifs_debug_data_proc_show(struct seq_file *m, void *v) { - struct list_head *tmp, *tmp2, *tmp3; + struct list_head *tmp1, *tmp2, *tmp3; struct mid_q_entry *mid_entry; struct TCP_Server_Info *server; struct cifsSesInfo *ses; struct cifsTconInfo *tcon; - int i; + int i, j; + __u32 dev_type; seq_puts(m, "Display Internal CIFS Data Structures for Debugging\n" @@ -123,8 +124,8 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) i = 0; read_lock(&cifs_tcp_ses_lock); - list_for_each(tmp, &cifs_tcp_ses_list) { - server = list_entry(tmp, struct TCP_Server_Info, + list_for_each(tmp1, &cifs_tcp_ses_list) { + server = list_entry(tmp1, struct TCP_Server_Info, tcp_ses_list); i++; list_for_each(tmp2, &server->smb_ses_list) { @@ -133,12 +134,12 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) if ((ses->serverDomain == NULL) || (ses->serverOS == NULL) || (ses->serverNOS == NULL)) { - seq_printf(m, "\nentry for %s not fully " - "displayed\n\t", ses->serverName); + seq_printf(m, "\n%d) entry for %s not fully " + "displayed\n\t", i, ses->serverName); } else { seq_printf(m, - "\n%d) Name: %s Domain: %s Mounts: %d OS:" - " %s \n\tNOS: %s\tCapability: 0x%x\n\tSMB" + "\n%d) Name: %s Domain: %s Uses: %d OS:" + " %s\n\tNOS: %s\tCapability: 0x%x\n\tSMB" " session status: %d\t", i, ses->serverName, ses->serverDomain, ses->ses_count, ses->serverOS, ses->serverNOS, @@ -156,14 +157,44 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) atomic_read(&server->num_waiters)); #endif - seq_puts(m, "\nMIDs:\n"); + seq_puts(m, "\n\tShares:"); + j = 0; + list_for_each(tmp3, &ses->tcon_list) { + tcon = list_entry(tmp3, struct cifsTconInfo, + tcon_list); + ++j; + dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType); + seq_printf(m, "\n\t%d) %s Mounts: %d ", j, + tcon->treeName, tcon->tc_count); + if (tcon->nativeFileSystem) { + seq_printf(m, "Type: %s ", + tcon->nativeFileSystem); + } + seq_printf(m, "DevInfo: 0x%x Attributes: 0x%x" + "\nPathComponentMax: %d Status: 0x%d", + le32_to_cpu(tcon->fsDevInfo.DeviceCharacteristics), + le32_to_cpu(tcon->fsAttrInfo.Attributes), + le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength), + tcon->tidStatus); + if (dev_type == FILE_DEVICE_DISK) + seq_puts(m, " type: DISK "); + else if (dev_type == FILE_DEVICE_CD_ROM) + seq_puts(m, " type: CDROM "); + else + seq_printf(m, " type: %d ", dev_type); + + if (tcon->need_reconnect) + seq_puts(m, "\tDISCONNECTED "); + seq_putc(m, '\n'); + } + + seq_puts(m, "\n\tMIDs:\n"); spin_lock(&GlobalMid_Lock); list_for_each(tmp3, &server->pending_mid_q) { - mid_entry = list_entry(tmp3, struct - mid_q_entry, + mid_entry = list_entry(tmp3, struct mid_q_entry, qhead); - seq_printf(m, "State: %d com: %d pid:" + seq_printf(m, "\tState: %d com: %d pid:" " %d tsk: %p mid %d\n", mid_entry->midState, (int)mid_entry->command, @@ -177,41 +208,6 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) read_unlock(&cifs_tcp_ses_lock); seq_putc(m, '\n'); - seq_puts(m, "Shares:"); - - i = 0; - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalTreeConnectionList) { - __u32 dev_type; - i++; - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType); - seq_printf(m, "\n%d) %s Uses: %d ", i, - tcon->treeName, atomic_read(&tcon->useCount)); - if (tcon->nativeFileSystem) { - seq_printf(m, "Type: %s ", - tcon->nativeFileSystem); - } - seq_printf(m, "DevInfo: 0x%x Attributes: 0x%x" - "\nPathComponentMax: %d Status: %d", - le32_to_cpu(tcon->fsDevInfo.DeviceCharacteristics), - le32_to_cpu(tcon->fsAttrInfo.Attributes), - le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength), - tcon->tidStatus); - if (dev_type == FILE_DEVICE_DISK) - seq_puts(m, " type: DISK "); - else if (dev_type == FILE_DEVICE_CD_ROM) - seq_puts(m, " type: CDROM "); - else - seq_printf(m, " type: %d ", dev_type); - - if (tcon->need_reconnect) - seq_puts(m, "\tDISCONNECTED "); - } - read_unlock(&GlobalSMBSeslock); - - seq_putc(m, '\n'); - /* BB add code to dump additional info such as TCP session info now */ return 0; } @@ -235,7 +231,9 @@ static ssize_t cifs_stats_proc_write(struct file *file, { char c; int rc; - struct list_head *tmp; + struct list_head *tmp1, *tmp2, *tmp3; + struct TCP_Server_Info *server; + struct cifsSesInfo *ses; struct cifsTconInfo *tcon; rc = get_user(c, buffer); @@ -243,33 +241,42 @@ static ssize_t cifs_stats_proc_write(struct file *file, return rc; if (c == '1' || c == 'y' || c == 'Y' || c == '0') { - read_lock(&GlobalSMBSeslock); #ifdef CONFIG_CIFS_STATS2 atomic_set(&totBufAllocCount, 0); atomic_set(&totSmBufAllocCount, 0); #endif /* CONFIG_CIFS_STATS2 */ - list_for_each(tmp, &GlobalTreeConnectionList) { - tcon = list_entry(tmp, struct cifsTconInfo, - cifsConnectionList); - atomic_set(&tcon->num_smbs_sent, 0); - atomic_set(&tcon->num_writes, 0); - atomic_set(&tcon->num_reads, 0); - atomic_set(&tcon->num_oplock_brks, 0); - atomic_set(&tcon->num_opens, 0); - atomic_set(&tcon->num_closes, 0); - atomic_set(&tcon->num_deletes, 0); - atomic_set(&tcon->num_mkdirs, 0); - atomic_set(&tcon->num_rmdirs, 0); - atomic_set(&tcon->num_renames, 0); - atomic_set(&tcon->num_t2renames, 0); - atomic_set(&tcon->num_ffirst, 0); - atomic_set(&tcon->num_fnext, 0); - atomic_set(&tcon->num_fclose, 0); - atomic_set(&tcon->num_hardlinks, 0); - atomic_set(&tcon->num_symlinks, 0); - atomic_set(&tcon->num_locks, 0); + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp1, &cifs_tcp_ses_list) { + server = list_entry(tmp1, struct TCP_Server_Info, + tcp_ses_list); + list_for_each(tmp2, &server->smb_session_list) { + ses = list_entry(tmp2, struct cifsSesInfo, + smb_session_list); + list_for_each(tmp3, &ses->tcon_list) { + tcon = list_entry(tmp3, + struct cifsTconInfo, + tcon_list); + atomic_set(&tcon->num_smbs_sent, 0); + atomic_set(&tcon->num_writes, 0); + atomic_set(&tcon->num_reads, 0); + atomic_set(&tcon->num_oplock_brks, 0); + atomic_set(&tcon->num_opens, 0); + atomic_set(&tcon->num_closes, 0); + atomic_set(&tcon->num_deletes, 0); + atomic_set(&tcon->num_mkdirs, 0); + atomic_set(&tcon->num_rmdirs, 0); + atomic_set(&tcon->num_renames, 0); + atomic_set(&tcon->num_t2renames, 0); + atomic_set(&tcon->num_ffirst, 0); + atomic_set(&tcon->num_fnext, 0); + atomic_set(&tcon->num_fclose, 0); + atomic_set(&tcon->num_hardlinks, 0); + atomic_set(&tcon->num_symlinks, 0); + atomic_set(&tcon->num_locks, 0); + } + } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } return count; @@ -278,7 +285,9 @@ static ssize_t cifs_stats_proc_write(struct file *file, static int cifs_stats_proc_show(struct seq_file *m, void *v) { int i; - struct list_head *tmp; + struct list_head *tmp1, *tmp2, *tmp3; + struct TCP_Server_Info *server; + struct cifsSesInfo *ses; struct cifsTconInfo *tcon; seq_printf(m, @@ -307,44 +316,55 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v) GlobalCurrentXid, GlobalMaxActiveXid); i = 0; - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalTreeConnectionList) { - i++; - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - seq_printf(m, "\n%d) %s", i, tcon->treeName); - if (tcon->need_reconnect) - seq_puts(m, "\tDISCONNECTED "); - seq_printf(m, "\nSMBs: %d Oplock Breaks: %d", - atomic_read(&tcon->num_smbs_sent), - atomic_read(&tcon->num_oplock_brks)); - seq_printf(m, "\nReads: %d Bytes: %lld", - atomic_read(&tcon->num_reads), - (long long)(tcon->bytes_read)); - seq_printf(m, "\nWrites: %d Bytes: %lld", - atomic_read(&tcon->num_writes), - (long long)(tcon->bytes_written)); - seq_printf(m, - "\nLocks: %d HardLinks: %d Symlinks: %d", - atomic_read(&tcon->num_locks), - atomic_read(&tcon->num_hardlinks), - atomic_read(&tcon->num_symlinks)); - - seq_printf(m, "\nOpens: %d Closes: %d Deletes: %d", - atomic_read(&tcon->num_opens), - atomic_read(&tcon->num_closes), - atomic_read(&tcon->num_deletes)); - seq_printf(m, "\nMkdirs: %d Rmdirs: %d", - atomic_read(&tcon->num_mkdirs), - atomic_read(&tcon->num_rmdirs)); - seq_printf(m, "\nRenames: %d T2 Renames %d", - atomic_read(&tcon->num_renames), - atomic_read(&tcon->num_t2renames)); - seq_printf(m, "\nFindFirst: %d FNext %d FClose %d", - atomic_read(&tcon->num_ffirst), - atomic_read(&tcon->num_fnext), - atomic_read(&tcon->num_fclose)); + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp1, &cifs_tcp_ses_list) { + server = list_entry(tmp1, struct TCP_Server_Info, + tcp_ses_list); + list_for_each(tmp2, &server->smb_ses_list) { + ses = list_entry(tmp2, struct cifsSesInfo, + smb_ses_list); + list_for_each(tmp3, &ses->tcon_list) { + tcon = list_entry(tmp3, + struct cifsTconInfo, + tcon_list); + i++; + seq_printf(m, "\n%d) %s", i, tcon->treeName); + if (tcon->need_reconnect) + seq_puts(m, "\tDISCONNECTED "); + seq_printf(m, "\nSMBs: %d Oplock Breaks: %d", + atomic_read(&tcon->num_smbs_sent), + atomic_read(&tcon->num_oplock_brks)); + seq_printf(m, "\nReads: %d Bytes: %lld", + atomic_read(&tcon->num_reads), + (long long)(tcon->bytes_read)); + seq_printf(m, "\nWrites: %d Bytes: %lld", + atomic_read(&tcon->num_writes), + (long long)(tcon->bytes_written)); + seq_printf(m, "\nLocks: %d HardLinks: %d " + "Symlinks: %d", + atomic_read(&tcon->num_locks), + atomic_read(&tcon->num_hardlinks), + atomic_read(&tcon->num_symlinks)); + seq_printf(m, "\nOpens: %d Closes: %d" + "Deletes: %d", + atomic_read(&tcon->num_opens), + atomic_read(&tcon->num_closes), + atomic_read(&tcon->num_deletes)); + seq_printf(m, "\nMkdirs: %d Rmdirs: %d", + atomic_read(&tcon->num_mkdirs), + atomic_read(&tcon->num_rmdirs)); + seq_printf(m, "\nRenames: %d T2 Renames %d", + atomic_read(&tcon->num_renames), + atomic_read(&tcon->num_t2renames)); + seq_printf(m, "\nFindFirst: %d FNext %d " + "FClose %d", + atomic_read(&tcon->num_ffirst), + atomic_read(&tcon->num_fnext), + atomic_read(&tcon->num_fclose)); + } + } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); seq_putc(m, '\n'); return 0; diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index a1e96620b097..d9cf467309e8 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -514,10 +514,11 @@ static void cifs_umount_begin(struct super_block *sb) tcon = cifs_sb->tcon; if (tcon == NULL) return; - down(&tcon->tconSem); - if (atomic_read(&tcon->useCount) == 1) + + read_lock(&cifs_tcp_ses_lock); + if (tcon->tc_count == 1) tcon->tidStatus = CifsExiting; - up(&tcon->tconSem); + read_unlock(&cifs_tcp_ses_lock); /* cancel_brl_requests(tcon); */ /* BB mark all brl mids as exiting */ /* cancel_notify_requests(tcon); */ @@ -1060,7 +1061,6 @@ init_cifs(void) int rc = 0; cifs_proc_init(); INIT_LIST_HEAD(&cifs_tcp_ses_list); - INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); #ifdef CONFIG_CIFS_EXPERIMENTAL INIT_LIST_HEAD(&GlobalDnotifyReqList); diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 631a99f72f22..f1ae1f57c30d 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -233,16 +233,15 @@ struct cifsSesInfo { * session */ struct cifsTconInfo { - struct list_head cifsConnectionList; + struct list_head tcon_list; + int tc_count; struct list_head openFileList; - struct semaphore tconSem; struct cifsSesInfo *ses; /* pointer to session associated with */ char treeName[MAX_TREE_SIZE + 1]; /* UNC name of resource in ASCII */ char *nativeFileSystem; __u16 tid; /* The 2 byte tree id */ __u16 Flags; /* optional support bits */ enum statusEnum tidStatus; - atomic_t useCount; /* how many explicit/implicit mounts to share */ #ifdef CONFIG_CIFS_STATS atomic_t num_smbs_sent; atomic_t num_writes; @@ -600,9 +599,13 @@ require use of the stronger protocol */ */ GLOBAL_EXTERN struct list_head cifs_tcp_ses_list; -/* protects cifs_tcp_ses_list and srv_count for each tcp session */ +/* + * This lock protects the cifs_tcp_ses_list, the list of smb sessions per + * tcp session, and the list of tcon's per smb session. It also protects + * the reference counters for the server, smb session, and tcon. Finally, + * changes to the tcon->tidStatus should be done while holding this lock. + */ GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock; -GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ GLOBAL_EXTERN struct list_head GlobalOplock_Q; diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 9c95617baa4d..e6bb2d9d5b09 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -742,50 +742,31 @@ CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon) int rc = 0; cFYI(1, ("In tree disconnect")); - /* - * If last user of the connection and - * connection alive - disconnect it - * If this is the last connection on the server session disconnect it - * (and inside session disconnect we should check if tcp socket needs - * to be freed and kernel thread woken up). - */ - if (tcon) - down(&tcon->tconSem); - else - return -EIO; - atomic_dec(&tcon->useCount); - if (atomic_read(&tcon->useCount) > 0) { - up(&tcon->tconSem); - return -EBUSY; - } + /* BB: do we need to check this? These should never be NULL. */ + if ((tcon->ses == NULL) || (tcon->ses->server == NULL)) + return -EIO; - /* No need to return error on this operation if tid invalidated and - closed on server already e.g. due to tcp session crashing */ - if (tcon->need_reconnect) { - up(&tcon->tconSem); + /* + * No need to return error on this operation if tid invalidated and + * closed on server already e.g. due to tcp session crashing. Also, + * the tcon is no longer on the list, so no need to take lock before + * checking this. + */ + if (tcon->need_reconnect) return 0; - } - if ((tcon->ses == NULL) || (tcon->ses->server == NULL)) { - up(&tcon->tconSem); - return -EIO; - } rc = small_smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon, (void **)&smb_buffer); - if (rc) { - up(&tcon->tconSem); + if (rc) return rc; - } rc = SendReceiveNoRsp(xid, tcon->ses, smb_buffer, 0); if (rc) cFYI(1, ("Tree disconnect failed %d", rc)); - up(&tcon->tconSem); - /* No need to return error on this operation if tid invalidated and - closed on server already e.g. due to tcp session crashing */ + closed on server already e.g. due to tcp session crashing */ if (rc == -EAGAIN) rc = 0; diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index a3dc0d7cafc3..2f2be8faabb3 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -124,7 +124,7 @@ static int cifs_reconnect(struct TCP_Server_Info *server) { int rc = 0; - struct list_head *tmp; + struct list_head *tmp, *tmp2; struct cifsSesInfo *ses; struct cifsTconInfo *tcon; struct mid_q_entry *mid_entry; @@ -149,13 +149,12 @@ cifs_reconnect(struct TCP_Server_Info *server) ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); ses->need_reconnect = true; ses->ipc_tid = 0; - } - read_unlock(&cifs_tcp_ses_lock); - list_for_each(tmp, &GlobalTreeConnectionList) { - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - if ((tcon->ses) && (tcon->ses->server == server)) + list_for_each(tmp2, &ses->tcon_list) { + tcon = list_entry(tmp2, struct cifsTconInfo, tcon_list); tcon->need_reconnect = true; + } } + read_unlock(&cifs_tcp_ses_lock); /* do not want to be sending data on a socket we are freeing */ down(&server->tcpSem); if (server->ssocket) { @@ -1462,6 +1461,52 @@ cifs_put_smb_ses(struct cifsSesInfo *ses) cifs_put_tcp_session(server); } +static struct cifsTconInfo * +cifs_find_tcon(struct cifsSesInfo *ses, const char *unc) +{ + struct list_head *tmp; + struct cifsTconInfo *tcon; + + write_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &ses->tcon_list) { + tcon = list_entry(tmp, struct cifsTconInfo, tcon_list); + if (tcon->tidStatus == CifsExiting) + continue; + if (strncmp(tcon->treeName, unc, MAX_TREE_SIZE)) + continue; + + ++tcon->tc_count; + write_unlock(&cifs_tcp_ses_lock); + return tcon; + } + write_unlock(&cifs_tcp_ses_lock); + return NULL; +} + +static void +cifs_put_tcon(struct cifsTconInfo *tcon) +{ + int xid; + struct cifsSesInfo *ses = tcon->ses; + + write_lock(&cifs_tcp_ses_lock); + if (--tcon->tc_count > 0) { + write_unlock(&cifs_tcp_ses_lock); + return; + } + + list_del_init(&tcon->tcon_list); + write_unlock(&cifs_tcp_ses_lock); + + xid = GetXid(); + CIFSSMBTDis(xid, tcon); + _FreeXid(xid); + + DeleteTconOplockQEntries(tcon); + tconInfoFree(tcon); + cifs_put_smb_ses(ses); +} + int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path, const struct nls_table *nls_codepage, unsigned int *pnum_referrals, @@ -2220,11 +2265,11 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (!rc) { setup_cifs_sb(&volume_info, cifs_sb); + tcon = cifs_find_tcon(pSesInfo, volume_info.UNC); if (tcon) { cFYI(1, ("Found match on UNC path")); - if (tcon->seal != volume_info.seal) - cERROR(1, ("transport encryption setting " - "conflicts with existing tid")); + /* existing tcon already has a reference */ + cifs_put_smb_ses(pSesInfo); } else { tcon = tconInfoAlloc(); if (tcon == NULL) { @@ -2257,6 +2302,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (rc) goto mount_fail_check; tcon->seal = volume_info.seal; + tcon->ses = pSesInfo; + write_lock(&cifs_tcp_ses_lock); + list_add(&tcon->tcon_list, &pSesInfo->tcon_list); + write_unlock(&cifs_tcp_ses_lock); } /* we can have only one retry value for a connection @@ -2283,18 +2332,14 @@ mount_fail_check: /* If find_unc succeeded then rc == 0 so we can not end */ /* up accidently freeing someone elses tcon struct */ if (tcon) - tconInfoFree(tcon); - - /* should also end up putting our tcp session ref if needed */ - if (pSesInfo) + cifs_put_tcon(tcon); + else if (pSesInfo) cifs_put_smb_ses(pSesInfo); else cifs_put_tcp_session(srvTcp); goto out; } - atomic_inc(&tcon->useCount); cifs_sb->tcon = tcon; - tcon->ses = pSesInfo; /* do not care if following two calls succeed - informational */ if (!tcon->ipc) { @@ -3565,23 +3610,10 @@ int cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) { int rc = 0; - int xid; - struct cifsSesInfo *ses = NULL; char *tmp; - xid = GetXid(); - - if (cifs_sb->tcon) { - ses = cifs_sb->tcon->ses; /* save ptr to ses before delete tcon!*/ - rc = CIFSSMBTDis(xid, cifs_sb->tcon); - if (rc == -EBUSY) { - FreeXid(xid); - return 0; - } - DeleteTconOplockQEntries(cifs_sb->tcon); - tconInfoFree(cifs_sb->tcon); - cifs_put_smb_ses(ses); - } + if (cifs_sb->tcon) + cifs_put_tcon(cifs_sb->tcon); cifs_sb->tcon = NULL; tmp = cifs_sb->prepath; @@ -3589,7 +3621,6 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) cifs_sb->prepath = NULL; kfree(tmp); - FreeXid(xid); return rc; } diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 46c8c7baccba..addd1dcc2d79 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -79,6 +79,7 @@ sesInfoAlloc(void) ret_buf->status = CifsNew; ++ret_buf->ses_count; INIT_LIST_HEAD(&ret_buf->smb_ses_list); + INIT_LIST_HEAD(&ret_buf->tcon_list); init_MUTEX(&ret_buf->sesSem); } return ret_buf; @@ -107,17 +108,14 @@ tconInfoAlloc(void) struct cifsTconInfo *ret_buf; ret_buf = kzalloc(sizeof(struct cifsTconInfo), GFP_KERNEL); if (ret_buf) { - write_lock(&GlobalSMBSeslock); atomic_inc(&tconInfoAllocCount); - list_add(&ret_buf->cifsConnectionList, - &GlobalTreeConnectionList); ret_buf->tidStatus = CifsNew; + ++ret_buf->tc_count; INIT_LIST_HEAD(&ret_buf->openFileList); - init_MUTEX(&ret_buf->tconSem); + INIT_LIST_HEAD(&ret_buf->tcon_list); #ifdef CONFIG_CIFS_STATS spin_lock_init(&ret_buf->stat_lock); #endif - write_unlock(&GlobalSMBSeslock); } return ret_buf; } @@ -129,10 +127,7 @@ tconInfoFree(struct cifsTconInfo *buf_to_free) cFYI(1, ("Null buffer passed to tconInfoFree")); return; } - write_lock(&GlobalSMBSeslock); atomic_dec(&tconInfoAllocCount); - list_del(&buf_to_free->cifsConnectionList); - write_unlock(&GlobalSMBSeslock); kfree(buf_to_free->nativeFileSystem); kfree(buf_to_free); } @@ -493,9 +488,10 @@ bool is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) { struct smb_com_lock_req *pSMB = (struct smb_com_lock_req *)buf; - struct list_head *tmp; - struct list_head *tmp1; + struct list_head *tmp, *tmp1, *tmp2; + struct cifsSesInfo *ses; struct cifsTconInfo *tcon; + struct cifsInodeInfo *pCifsInode; struct cifsFileInfo *netfile; cFYI(1, ("Checking for oplock break or dnotify response")); @@ -550,42 +546,42 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) return false; /* look up tcon based on tid & uid */ - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalTreeConnectionList) { - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - if ((tcon->tid == buf->Tid) && (srv == tcon->ses->server)) { + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &srv->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + list_for_each(tmp1, &ses->tcon_list) { + tcon = list_entry(tmp1, struct cifsTconInfo, tcon_list); + if (tcon->tid != buf->Tid) + continue; + cifs_stats_inc(&tcon->num_oplock_brks); - list_for_each(tmp1, &tcon->openFileList) { - netfile = list_entry(tmp1, struct cifsFileInfo, + list_for_each(tmp2, &tcon->openFileList) { + netfile = list_entry(tmp2, struct cifsFileInfo, tlist); - if (pSMB->Fid == netfile->netfid) { - struct cifsInodeInfo *pCifsInode; - read_unlock(&GlobalSMBSeslock); - cFYI(1, - ("file id match, oplock break")); - pCifsInode = - CIFS_I(netfile->pInode); - pCifsInode->clientCanCacheAll = false; - if (pSMB->OplockLevel == 0) - pCifsInode->clientCanCacheRead - = false; - pCifsInode->oplockPending = true; - AllocOplockQEntry(netfile->pInode, - netfile->netfid, - tcon); - cFYI(1, - ("about to wake up oplock thread")); - if (oplockThread) - wake_up_process(oplockThread); - return true; - } + if (pSMB->Fid != netfile->netfid) + continue; + + read_unlock(&cifs_tcp_ses_lock); + cFYI(1, ("file id match, oplock break")); + pCifsInode = CIFS_I(netfile->pInode); + pCifsInode->clientCanCacheAll = false; + if (pSMB->OplockLevel == 0) + pCifsInode->clientCanCacheRead = false; + pCifsInode->oplockPending = true; + AllocOplockQEntry(netfile->pInode, + netfile->netfid, tcon); + cFYI(1, ("about to wake up oplock thread")); + if (oplockThread) + wake_up_process(oplockThread); + + return true; } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); cFYI(1, ("No matching file for oplock break")); return true; } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); cFYI(1, ("Can not process oplock break for non-existent connection")); return true; } -- cgit v1.2.3 From ebfe92ca65c780334bdf847ddc4eca15835bd9c0 Mon Sep 17 00:00:00 2001 From: Rémi Denis-Courmont Date: Sun, 16 Nov 2008 19:48:49 -0800 Subject: Phonet: refuse to send bigger than MTU packets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- net/phonet/af_phonet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c index defeb7a0d502..7ab30f668b5a 100644 --- a/net/phonet/af_phonet.c +++ b/net/phonet/af_phonet.c @@ -144,8 +144,8 @@ static int pn_send(struct sk_buff *skb, struct net_device *dev, struct phonethdr *ph; int err; - if (skb->len + 2 > 0xffff) { - /* Phonet length field would overflow */ + if (skb->len + 2 > 0xffff /* Phonet length field limit */ || + skb->len + sizeof(struct phonethdr) > dev->mtu) { err = -EMSGSIZE; goto drop; } -- cgit v1.2.3 From c2b3382cd4d6c6adef1347e81f20e16c93a39feb Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 17 Nov 2008 03:57:13 +0000 Subject: [CIFS] Fix build break Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 1d6dfa8923ca..490e34bbf27a 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -249,9 +249,9 @@ static ssize_t cifs_stats_proc_write(struct file *file, list_for_each(tmp1, &cifs_tcp_ses_list) { server = list_entry(tmp1, struct TCP_Server_Info, tcp_ses_list); - list_for_each(tmp2, &server->smb_session_list) { + list_for_each(tmp2, &server->smb_ses_list) { ses = list_entry(tmp2, struct cifsSesInfo, - smb_session_list); + smb_ses_list); list_for_each(tmp3, &ses->tcon_list) { tcon = list_entry(tmp3, struct cifsTconInfo, -- cgit v1.2.3 From 584c650b4e6fa16f9ab45d382f86ad6d9c625227 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sun, 16 Nov 2008 23:03:45 -0800 Subject: isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply commit a144ea4b7a13087081ab5402fa9ad0bcfd249e67 [IPV4]: annotate struct in_ifaddr Missed this extra byteswap as the isdn inlines hide the htonl inside put_u32 which causes an extra byteswap on little-endian arches. Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_net.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index bb904a0a98bd..1bfc55d7a26c 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -1641,8 +1641,10 @@ isdn_net_ciscohdlck_slarp_send_reply(isdn_net_local *lp) /* slarp reply, send own ip/netmask; if values are nonsense remote * should think we are unable to provide it with an address via SLARP */ p += put_u32(p, CISCO_SLARP_REPLY); - p += put_u32(p, addr); // address - p += put_u32(p, mask); // netmask + *(__be32 *)p = addr; // address + p += 4; + *(__be32 *)p = mask; // netmask + p += 4; p += put_u16(p, 0); // unused isdn_net_write_super(lp, skb); -- cgit v1.2.3 From 5f9021cfdc3524a4c5e3d7ae2d049eb7adcd6776 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 16 Nov 2008 23:20:31 -0800 Subject: rtnetlink: propagate error from dev_change_flags in do_setlink() Unlike ifconfig, iproute doesn't report an error when setting an interface up fails: (example: put wireless network mac80211 interface into repeater mode with iwconfig but do not set a peer MAC address, it should fail with -ENOLINK) without patch: # ip link set wlan0 up ; echo $? 0 # with patch: # ip link set wlan0 up ; echo $? RTNETLINK answers: Link has been severed 2 # Propagate the return value from dev_change_flags() to fix this. Signed-off-by: Patrick McHardy Tested-by: Johannes Berg Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 31f29d2989fd..4dfb6b4d4559 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -878,7 +878,9 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm, if (ifm->ifi_change) flags = (flags & ifm->ifi_change) | (dev->flags & ~ifm->ifi_change); - dev_change_flags(dev, flags); + err = dev_change_flags(dev, flags); + if (err < 0) + goto errout; } if (tb[IFLA_TXQLEN]) -- cgit v1.2.3 From 1e74f3000b86969de421ca0da08f42e7d21cbd99 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 17 Nov 2008 16:24:34 +0900 Subject: swiotlb: use coherent_dma_mask in alloc_coherent Impact: fix DMA buffer allocation coherency bug in certain configs This patch fixes swiotlb to use dev->coherent_dma_mask in swiotlb_alloc_coherent(). coherent_dma_mask is a subset of dma_mask (equal to it most of the time), enumerating the address range that a given device is able to DMA to/from in a cache-coherent way. But currently, swiotlb uses dev->dma_mask in alloc_coherent() implicitly via address_needs_mapping(), but alloc_coherent is really supposed to use coherent_dma_mask. This bug could break drivers that uses smaller coherent_dma_mask than dma_mask (though the current code works for the majority that use the same mask for coherent_dma_mask and dma_mask). Signed-off-by: FUJITA Tomonori Cc: tony.luck@intel.com Signed-off-by: Ingo Molnar --- lib/swiotlb.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 78330c37a61b..5f6c629a924d 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -467,9 +467,13 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t dev_addr; void *ret; int order = get_order(size); + u64 dma_mask = DMA_32BIT_MASK; + + if (hwdev && hwdev->coherent_dma_mask) + dma_mask = hwdev->coherent_dma_mask; ret = (void *)__get_free_pages(flags, order); - if (ret && address_needs_mapping(hwdev, virt_to_bus(ret), size)) { + if (ret && !is_buffer_dma_capable(dma_mask, virt_to_bus(ret), size)) { /* * The allocated memory isn't reachable by the device. * Fall back on swiotlb_map_single(). @@ -493,9 +497,9 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size, dev_addr = virt_to_bus(ret); /* Confirm address can be DMA'd by device */ - if (address_needs_mapping(hwdev, dev_addr, size)) { + if (!is_buffer_dma_capable(dma_mask, dev_addr, size)) { printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n", - (unsigned long long)*hwdev->dma_mask, + (unsigned long long)dma_mask, (unsigned long long)dev_addr); /* DMA_TO_DEVICE to avoid memcpy in unmap_single */ -- cgit v1.2.3 From 28105fda1ecadfa7c827b22d323c169f19dc04b0 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Tue, 11 Nov 2008 12:17:05 +0100 Subject: [ARM] 5330/1: mach-pxa: Fixup reset for systems using reboot=cold or other strings This patch makes do_hw_reset the default reboot behavior when nothing else matches. This restores reboot functionality on gumstix basix devices where reboot=cold is the default boot argument. Signed-off-by: Jaya Kumar Acked-by: Eric Miao Signed-off-by: Russell King --- arch/arm/mach-pxa/reset.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 1b2af575c40f..00b2dc2a1074 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -90,12 +90,13 @@ void arch_reset(char mode) /* Jump into ROM at address 0 */ cpu_reset(0); break; - case 'h': - do_hw_reset(); - break; case 'g': do_gpio_reset(); break; + case 'h': + default: + do_hw_reset(); + break; } } -- cgit v1.2.3 From ad133ba3dc283300e5b62b5b7211d2f39fbf6ee7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 17 Nov 2008 15:39:47 +0100 Subject: sched, signals: fix the racy usage of ->signal in account_group_xxx/run_posix_cpu_timers Impact: fix potential NULL dereference Contrary to ad474caca3e2a0550b7ce0706527ad5ab389a4d4 changelog, other acct_group_xxx() helpers can be called after exit_notify() by timer tick. Thanks to Roland for pointing out this. Somehow I missed this simple fact when I read the original patch, and I am afraid I confused Frank during the discussion. Sorry. Fortunately, these helpers work with current, we can check ->exit_state to ensure that ->signal can't go away under us. Also, add the comment and compiler barrier to account_group_exec_runtime(), to make sure we load ->signal only once. Signed-off-by: Oleg Nesterov Signed-off-by: Ingo Molnar --- kernel/posix-cpu-timers.c | 7 +++++-- kernel/sched_stats.h | 15 +++++++++++---- 2 files changed, 16 insertions(+), 6 deletions(-) diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 153dcb2639c3..895337b16a24 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1308,9 +1308,10 @@ static inline int task_cputime_expired(const struct task_cputime *sample, */ static inline int fastpath_timer_check(struct task_struct *tsk) { - struct signal_struct *sig = tsk->signal; + struct signal_struct *sig; - if (unlikely(!sig)) + /* tsk == current, ensure it is safe to use ->signal/sighand */ + if (unlikely(tsk->exit_state)) return 0; if (!task_cputime_zero(&tsk->cputime_expires)) { @@ -1323,6 +1324,8 @@ static inline int fastpath_timer_check(struct task_struct *tsk) if (task_cputime_expired(&task_sample, &tsk->cputime_expires)) return 1; } + + sig = tsk->signal; if (!task_cputime_zero(&sig->cputime_expires)) { struct task_cputime group_sample; diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index ee71bec1da66..7dbf72a2b02c 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -298,9 +298,11 @@ static inline void account_group_user_time(struct task_struct *tsk, { struct signal_struct *sig; - sig = tsk->signal; - if (unlikely(!sig)) + /* tsk == current, ensure it is safe to use ->signal */ + if (unlikely(tsk->exit_state)) return; + + sig = tsk->signal; if (sig->cputime.totals) { struct task_cputime *times; @@ -325,9 +327,11 @@ static inline void account_group_system_time(struct task_struct *tsk, { struct signal_struct *sig; - sig = tsk->signal; - if (unlikely(!sig)) + /* tsk == current, ensure it is safe to use ->signal */ + if (unlikely(tsk->exit_state)) return; + + sig = tsk->signal; if (sig->cputime.totals) { struct task_cputime *times; @@ -353,8 +357,11 @@ static inline void account_group_exec_runtime(struct task_struct *tsk, struct signal_struct *sig; sig = tsk->signal; + /* see __exit_signal()->task_rq_unlock_wait() */ + barrier(); if (unlikely(!sig)) return; + if (sig->cputime.totals) { struct task_cputime *times; -- cgit v1.2.3 From ab3f992983062440b4f37c666dac66d987902d91 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 17 Nov 2008 16:03:00 +0000 Subject: [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch set tcon->ses earlier If the inital tree connect fails, we'll end up calling cifs_put_smb_ses with a NULL pointer. Fix it by setting the tcon->ses earlier. Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 2f2be8faabb3..c7d341714586 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2270,16 +2270,18 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, cFYI(1, ("Found match on UNC path")); /* existing tcon already has a reference */ cifs_put_smb_ses(pSesInfo); + if (tcon->seal != volume_info.seal) + cERROR(1, ("transport encryption setting " + "conflicts with existing tid")); } else { tcon = tconInfoAlloc(); if (tcon == NULL) { rc = -ENOMEM; goto mount_fail_check; } + tcon->ses = pSesInfo; /* check for null share name ie connect to dfs root */ - - /* BB check if works for exactly length 3 strings */ if ((strchr(volume_info.UNC + 3, '\\') == NULL) && (strchr(volume_info.UNC + 3, '/') == NULL)) { /* rc = connect_to_dfs_path(...) */ @@ -2302,7 +2304,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (rc) goto mount_fail_check; tcon->seal = volume_info.seal; - tcon->ses = pSesInfo; write_lock(&cifs_tcp_ses_lock); list_add(&tcon->tcon_list, &pSesInfo->tcon_list); write_unlock(&cifs_tcp_ses_lock); -- cgit v1.2.3 From a4a16beadea041ab601e65b264b568e8b6b4f68d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 10 Nov 2008 09:05:37 +0100 Subject: oprofile: fix an overflow in ppro code reset_value was changed from long to u64 in commit b99170288421c79f0c2efa8b33e26e65f4bb7fb8 (oprofile: Implement Intel architectural perfmon support) But dynamic allocation of this array use a wrong type (long instead of u64) Cc: Andi Kleen Signed-off-by: Eric Dumazet Signed-off-by: Robert Richter --- arch/x86/oprofile/op_model_ppro.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index 3f1b81a83e2e..716d26f0e5d4 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -69,7 +69,7 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) int i; if (!reset_value) { - reset_value = kmalloc(sizeof(unsigned) * num_counters, + reset_value = kmalloc(sizeof(reset_value[0]) * num_counters, GFP_ATOMIC); if (!reset_value) return; -- cgit v1.2.3 From 26a3e99160cfb06a0a33e25b9fb0d516e2cc680d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 17 Nov 2008 09:35:00 -0800 Subject: xen: fix scrub_page() Impact: fix guest kernel crash with CONFIG_XEN_SCRUB_PAGES=y Jens noticed that scrub_page() has a buggy unmap of the wrong thing. (virtual address instead of page) Linus pointed out that the whole scrub_page() code is an unnecessary reimplementation of clear_highpage() to begin with. Just use clear_highpage() rather than reimplementing it poorly. Reported-by: Jens Axboe Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- drivers/xen/balloon.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index a0fb5eac407c..526c191e84ea 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -122,14 +122,7 @@ static struct timer_list balloon_timer; static void scrub_page(struct page *page) { #ifdef CONFIG_XEN_SCRUB_PAGES - if (PageHighMem(page)) { - void *v = kmap(page); - clear_page(v); - kunmap(v); - } else { - void *v = page_address(page); - clear_page(v); - } + clear_highpage(page); #endif } -- cgit v1.2.3 From 65ecc14a30ad21bed9aabdfd6a2ae1a1aaaa6a00 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 15 Nov 2008 12:02:34 -0600 Subject: Remove -mno-spe flags as they dont belong For some unknown reason at Steven Rostedt added in disabling of the SPE instruction generation for e500 based PPC cores in commit 6ec562328fda585be2d7f472cfac99d3b44d362a. We are removing it because: 1. It generates e500 kernels that don't work 2. its not the correct set of flags to do this 3. we handle this in the arch/powerpc/Makefile already 4. its unknown in talking to Steven why he did this Signed-off-by: Kumar Gala Tested-and-Acked-by: Steven Rostedt Signed-off-by: Linus Torvalds --- kernel/Makefile | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/kernel/Makefile b/kernel/Makefile index 9a3ec66a9d84..19fad003b19d 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -11,8 +11,6 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o -CFLAGS_REMOVE_sched.o = -mno-spe - ifdef CONFIG_FUNCTION_TRACER # Do not trace debug files and internal ftrace files CFLAGS_REMOVE_lockdep.o = -pg @@ -21,7 +19,7 @@ CFLAGS_REMOVE_mutex-debug.o = -pg CFLAGS_REMOVE_rtmutex-debug.o = -pg CFLAGS_REMOVE_cgroup-debug.o = -pg CFLAGS_REMOVE_sched_clock.o = -pg -CFLAGS_REMOVE_sched.o = -mno-spe -pg +CFLAGS_REMOVE_sched.o = -pg endif obj-$(CONFIG_FREEZER) += freezer.o -- cgit v1.2.3 From 93ce99e849433ede4ce8b410b749dc0cad1100b2 Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Mon, 17 Nov 2008 14:43:58 -0800 Subject: x86: add rdtsc barrier to TSC sync check Impact: fix incorrectly marked unstable TSC clock Patch (commit 0d12cdd "sched: improve sched_clock() performance") has a regression on one of the test systems here. With the patch, I see: checking TSC synchronization [CPU#0 -> CPU#1]: Measured 28 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Whereas, without the patch syncs pass fine on all CPUs: checking TSC synchronization [CPU#0 -> CPU#1]: passed. Due to this, TSC is marked unstable, when it is not actually unstable. This is because syncs in check_tsc_wrap() goes away due to this commit. As per the discussion on this thread, correct way to fix this is to add explicit syncs as below? Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc_sync.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c index 9ffb01c31c40..1c0dfbca87c1 100644 --- a/arch/x86/kernel/tsc_sync.c +++ b/arch/x86/kernel/tsc_sync.c @@ -46,7 +46,9 @@ static __cpuinit void check_tsc_warp(void) cycles_t start, now, prev, end; int i; + rdtsc_barrier(); start = get_cycles(); + rdtsc_barrier(); /* * The measurement runs for 20 msecs: */ @@ -61,7 +63,9 @@ static __cpuinit void check_tsc_warp(void) */ __raw_spin_lock(&sync_lock); prev = last_tsc; + rdtsc_barrier(); now = get_cycles(); + rdtsc_barrier(); last_tsc = now; __raw_spin_unlock(&sync_lock); -- cgit v1.2.3 From 2c55608f28444c3f33b10312881384c470ceed56 Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Thu, 23 Oct 2008 13:58:42 +0400 Subject: Fixed parsing of mount options when doing DFS submount Since these hit the same routines, and are relatively small, it is easier to review them as one patch. Fixed incorrect handling of the last option in some cases Fixed prefixpath handling convert path_consumed into host depended string length (in bytes) Use non default separator if it is provided in the original mount options Acked-by: Jeff Layton Signed-off-by: Igor Mammedov Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 71 +++++++++++++++++++++++++++++++++----------------- fs/cifs/cifssmb.c | 39 ++++++++++++++++++++++++--- 2 files changed, 83 insertions(+), 27 deletions(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index d2c8eef84f3c..e1c18362ba46 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -106,7 +106,8 @@ static char *cifs_get_share_name(const char *node_name) /** * compose_mount_options - creates mount options for refferral * @sb_mountdata: parent/root DFS mount options (template) - * @ref_unc: refferral server UNC + * @dentry: point where we are going to mount + * @ref: server's referral * @devname: pointer for saving device name * * creates mount options for submount based on template options sb_mountdata @@ -116,7 +117,8 @@ static char *cifs_get_share_name(const char *node_name) * Caller is responcible for freeing retunrned value if it is not error. */ static char *compose_mount_options(const char *sb_mountdata, - const char *ref_unc, + struct dentry *dentry, + const struct dfs_info3_param *ref, char **devname) { int rc; @@ -126,11 +128,12 @@ static char *compose_mount_options(const char *sb_mountdata, char *srvIP = NULL; char sep = ','; int off, noff; + char *fullpath; if (sb_mountdata == NULL) return ERR_PTR(-EINVAL); - *devname = cifs_get_share_name(ref_unc); + *devname = cifs_get_share_name(ref->node_name); rc = dns_resolve_server_name_to_ip(*devname, &srvIP); if (rc != 0) { cERROR(1, ("%s: Failed to resolve server part of %s to IP", @@ -138,7 +141,12 @@ static char *compose_mount_options(const char *sb_mountdata, mountdata = ERR_PTR(rc); goto compose_mount_options_out; } - md_len = strlen(sb_mountdata) + strlen(srvIP) + strlen(ref_unc) + 3; + /* md_len = strlen(...) + 12 for 'sep+prefixpath=' + * assuming that we have 'unc=' and 'ip=' in + * the original sb_mountdata + */ + md_len = strlen(sb_mountdata) + strlen(srvIP) + + strlen(ref->node_name) + 12; mountdata = kzalloc(md_len+1, GFP_KERNEL); if (mountdata == NULL) { mountdata = ERR_PTR(-ENOMEM); @@ -152,41 +160,56 @@ static char *compose_mount_options(const char *sb_mountdata, strncpy(mountdata, sb_mountdata, 5); off += 5; } - while ((tkn_e = strchr(sb_mountdata+off, sep))) { - noff = (tkn_e - (sb_mountdata+off)) + 1; - if (strnicmp(sb_mountdata+off, "unc=", 4) == 0) { + + do { + tkn_e = strchr(sb_mountdata + off, sep); + if (tkn_e == NULL) + noff = strlen(sb_mountdata + off); + else + noff = tkn_e - (sb_mountdata + off) + 1; + + if (strnicmp(sb_mountdata + off, "unc=", 4) == 0) { off += noff; continue; } - if (strnicmp(sb_mountdata+off, "ip=", 3) == 0) { + if (strnicmp(sb_mountdata + off, "ip=", 3) == 0) { off += noff; continue; } - if (strnicmp(sb_mountdata+off, "prefixpath=", 3) == 0) { + if (strnicmp(sb_mountdata + off, "prefixpath=", 11) == 0) { off += noff; continue; } - strncat(mountdata, sb_mountdata+off, noff); + strncat(mountdata, sb_mountdata + off, noff); off += noff; - } - strcat(mountdata, sb_mountdata+off); + } while (tkn_e); + strcat(mountdata, sb_mountdata + off); mountdata[md_len] = '\0'; /* copy new IP and ref share name */ - strcat(mountdata, ",ip="); + if (mountdata[strlen(mountdata) - 1] != sep) + strncat(mountdata, &sep, 1); + strcat(mountdata, "ip="); strcat(mountdata, srvIP); - strcat(mountdata, ",unc="); + strncat(mountdata, &sep, 1); + strcat(mountdata, "unc="); strcat(mountdata, *devname); /* find & copy prefixpath */ - tkn_e = strchr(ref_unc+2, '\\'); - if (tkn_e) { - tkn_e = strchr(tkn_e+1, '\\'); - if (tkn_e) { - strcat(mountdata, ",prefixpath="); - strcat(mountdata, tkn_e+1); - } + tkn_e = strchr(ref->node_name + 2, '\\'); + if (tkn_e == NULL) /* invalid unc, missing share name*/ + goto compose_mount_options_out; + + fullpath = build_path_from_dentry(dentry); + tkn_e = strchr(tkn_e + 1, '\\'); + if (tkn_e || strlen(fullpath) - (ref->path_consumed)) { + strncat(mountdata, &sep, 1); + strcat(mountdata, "prefixpath="); + if (tkn_e) + strcat(mountdata, tkn_e + 1); + strcat(mountdata, fullpath + (ref->path_consumed)); } + kfree(fullpath); /*cFYI(1,("%s: parent mountdata: %s", __func__,sb_mountdata));*/ /*cFYI(1, ("%s: submount mountdata: %s", __func__, mountdata ));*/ @@ -198,7 +221,7 @@ compose_mount_options_out: static struct vfsmount *cifs_dfs_do_refmount(const struct vfsmount *mnt_parent, - struct dentry *dentry, char *ref_unc) + struct dentry *dentry, const struct dfs_info3_param *ref) { struct cifs_sb_info *cifs_sb; struct vfsmount *mnt; @@ -207,7 +230,7 @@ static struct vfsmount *cifs_dfs_do_refmount(const struct vfsmount *mnt_parent, cifs_sb = CIFS_SB(dentry->d_inode->i_sb); mountdata = compose_mount_options(cifs_sb->mountdata, - ref_unc, &devname); + dentry, ref, &devname); if (IS_ERR(mountdata)) return (struct vfsmount *)mountdata; @@ -310,7 +333,7 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) } mnt = cifs_dfs_do_refmount(nd->path.mnt, nd->path.dentry, - referrals[i].node_name); + referrals + i); cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__, referrals[i].node_name, mnt)); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index e6bb2d9d5b09..bdda46dd435a 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3899,6 +3899,27 @@ GetInodeNumOut: return rc; } +/* computes length of UCS string converted to host codepage + * @src: UCS string + * @maxlen: length of the input string in UCS characters + * (not in bytes) + * + * return: size of input string in host codepage + */ +static int hostlen_fromUCS(const __le16 *src, const int maxlen, + const struct nls_table *nls_codepage) { + int i; + int hostlen = 0; + char to[4]; + int charlen; + for (i = 0; (i < maxlen) && src[i]; ++i) { + charlen = nls_codepage->uni2char(le16_to_cpu(src[i]), + to, NLS_MAX_CHARSET_SIZE); + hostlen += charlen > 0 ? charlen : 1; + } + return hostlen; +} + /* parses DFS refferal V3 structure * caller is responsible for freeing target_nodes * returns: @@ -3909,7 +3930,8 @@ static int parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, unsigned int *num_of_nodes, struct dfs_info3_param **target_nodes, - const struct nls_table *nls_codepage) + const struct nls_table *nls_codepage, int remap, + const char *searchName) { int i, rc = 0; char *data_end; @@ -3960,7 +3982,17 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, struct dfs_info3_param *node = (*target_nodes)+i; node->flags = le16_to_cpu(pSMBr->DFSFlags); - node->path_consumed = le16_to_cpu(pSMBr->PathConsumed); + if (is_unicode) { + __le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL); + cifsConvertToUCS((__le16 *) tmp, searchName, + PATH_MAX, nls_codepage, remap); + node->path_consumed = hostlen_fromUCS(tmp, + le16_to_cpu(pSMBr->PathConsumed)/2, + nls_codepage); + kfree(tmp); + } else + node->path_consumed = le16_to_cpu(pSMBr->PathConsumed); + node->server_type = le16_to_cpu(ref->ServerType); node->ref_flag = le16_to_cpu(ref->ReferralEntryFlags); @@ -4093,7 +4125,8 @@ getDFSRetry: /* parse returned result into more usable form */ rc = parse_DFS_referrals(pSMBr, num_of_nodes, - target_nodes, nls_codepage); + target_nodes, nls_codepage, remap, + searchName); GetDFSRefExit: cifs_buf_release(pSMB); -- cgit v1.2.3 From b066a48c9532243894f93a06ca5a0ee2cc21a8dc Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Tue, 18 Nov 2008 03:49:05 +0000 Subject: prevent cifs_writepages() from skipping unwritten pages Fixes a data corruption under heavy stress in which pages could be left dirty after all open instances of a inode have been closed. In order to write contiguous pages whenever possible, cifs_writepages() asks pagevec_lookup_tag() for more pages than it may write at one time. Normally, it then resets index just past the last page written before calling pagevec_lookup_tag() again. If cifs_writepages() can't write the first page returned, it wasn't resetting index, and the next call to pagevec_lookup_tag() resulted in skipping all of the pages it previously returned, even though cifs_writepages() did nothing with them. This can result in data loss when the file descriptor is about to be closed. This patch ensures that index gets set back to the next returned page so that none get skipped. Signed-off-by: Dave Kleikamp Acked-by: Jeff Layton Cc: Shirish S Pargaonkar Signed-off-by: Steve French --- fs/cifs/file.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 1540adaa593d..6449e1aae621 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1404,7 +1404,10 @@ retry: if ((wbc->nr_to_write -= n_iov) <= 0) done = 1; index = next; - } + } else + /* Need to re-find the pages we skipped */ + index = pvec.pages[0]->index + 1; + pagevec_release(&pvec); } if (!scanned && !done) { -- cgit v1.2.3 From 700018e0a77b4113172257fcdaa1c58e27a5074f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 18 Nov 2008 14:02:03 +0800 Subject: cpuset: fix regression when failed to generate sched domains Impact: properly rebuild sched-domains on kmalloc() failure When cpuset failed to generate sched domains due to kmalloc() failure, the scheduler should fallback to the single partition 'fallback_doms' and rebuild sched domains, but now it only destroys but not rebuilds sched domains. The regression was introduced by: | commit dfb512ec4834116124da61d6c1ee10fd0aa32bd6 | Author: Max Krasnyansky | Date: Fri Aug 29 13:11:41 2008 -0700 | | sched: arch_reinit_sched_domains() must destroy domains to force rebuild After the above commit, partition_sched_domains(0, NULL, NULL) will only destroy sched domains and partition_sched_domains(1, NULL, NULL) will create the default sched domain. Signed-off-by: Li Zefan Cc: Max Krasnyansky Cc: Signed-off-by: Ingo Molnar --- kernel/cpuset.c | 12 ++++++++---- kernel/sched.c | 13 +++++++------ 2 files changed, 15 insertions(+), 10 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 3e00526f52ec..81fc6791a296 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -587,7 +587,6 @@ static int generate_sched_domains(cpumask_t **domains, int ndoms; /* number of sched domains in result */ int nslot; /* next empty doms[] cpumask_t slot */ - ndoms = 0; doms = NULL; dattr = NULL; csa = NULL; @@ -674,10 +673,8 @@ restart: * Convert to and populate cpu masks. */ doms = kmalloc(ndoms * sizeof(cpumask_t), GFP_KERNEL); - if (!doms) { - ndoms = 0; + if (!doms) goto done; - } /* * The rest of the code, including the scheduler, can deal with @@ -732,6 +729,13 @@ restart: done: kfree(csa); + /* + * Fallback to the default domain if kmalloc() failed. + * See comments in partition_sched_domains(). + */ + if (doms == NULL) + ndoms = 1; + *domains = doms; *attributes = dattr; return ndoms; diff --git a/kernel/sched.c b/kernel/sched.c index c94baf2969e7..9b1e79371c20 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7789,13 +7789,14 @@ static int dattrs_equal(struct sched_domain_attr *cur, int idx_cur, * * The passed in 'doms_new' should be kmalloc'd. This routine takes * ownership of it and will kfree it when done with it. If the caller - * failed the kmalloc call, then it can pass in doms_new == NULL, - * and partition_sched_domains() will fallback to the single partition - * 'fallback_doms', it also forces the domains to be rebuilt. + * failed the kmalloc call, then it can pass in doms_new == NULL && + * ndoms_new == 1, and partition_sched_domains() will fallback to + * the single partition 'fallback_doms', it also forces the domains + * to be rebuilt. * - * If doms_new==NULL it will be replaced with cpu_online_map. - * ndoms_new==0 is a special case for destroying existing domains. - * It will not create the default domain. + * If doms_new == NULL it will be replaced with cpu_online_map. + * ndoms_new == 0 is a special case for destroying existing domains, + * and it will not create the default domain. * * Call with hotplug lock held */ -- cgit v1.2.3 From e270219f4372b58bd3eeac12bd9f7edc592b8f6b Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Tue, 18 Nov 2008 10:15:24 +0600 Subject: kernel/profile.c: fix section mismatch warning Impact: fix section mismatch warning in kernel/profile.c Here, profile_nop function has been called from a non-init function create_hash_tables(void). Which generetes a section mismatch warning. Previously, create_hash_tables(void) was a init function. So, removing __init from create_hash_tables(void) requires profile_nop to be non-init. This patch makes profile_nop function inline and fixes the following warning: WARNING: vmlinux.o(.text+0x6ebb6): Section mismatch in reference from the function create_hash_tables() to the function .init.text:profile_nop() The function create_hash_tables() references the function __init profile_nop(). This is often because create_hash_tables lacks a __init annotation or the annotation of profile_nop is wrong. Signed-off-by: Rakib Mullick Signed-off-by: Ingo Molnar --- kernel/profile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/profile.c b/kernel/profile.c index 9830a037d8db..5b7d1ac7124c 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -544,7 +544,7 @@ static const struct file_operations proc_profile_operations = { }; #ifdef CONFIG_SMP -static void __init profile_nop(void *unused) +static inline void profile_nop(void *unused) { } -- cgit v1.2.3 From 41c3b648bd4cdc34fd1918e288f8afe78903432e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 18 Nov 2008 10:45:15 +0100 Subject: ALSA: hda - Fix GPIO initialization in patch_stac92hd71bxx() Fixed the GPIO mask and co initialization in patch_stac92hd71bxx() so that the gpio_maks for HP_M4 model is set properly. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 0df6f979f2a3..b254e90b47ca 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4478,6 +4478,13 @@ again: stac92xx_set_config_regs(codec); } + if (spec->board_config > STAC_92HD71BXX_REF) { + /* GPIO0 = EAPD */ + spec->gpio_mask = 0x01; + spec->gpio_dir = 0x01; + spec->gpio_data = 0x01; + } + switch (codec->vendor_id) { case 0x111d76b6: /* 4 Port without Analog Mixer */ case 0x111d76b7: @@ -4537,13 +4544,6 @@ again: spec->aloopback_mask = 0x50; spec->aloopback_shift = 0; - if (spec->board_config > STAC_92HD71BXX_REF) { - /* GPIO0 = EAPD */ - spec->gpio_mask = 0x01; - spec->gpio_dir = 0x01; - spec->gpio_data = 0x01; - } - spec->powerdown_adcs = 1; spec->digbeep_nid = 0x26; spec->mux_nids = stac92hd71bxx_mux_nids; -- cgit v1.2.3 From 4213cb64004e38b3e78424f30e1e638f8004c7a8 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Tue, 18 Nov 2008 17:48:22 +0800 Subject: Blackfin arch: fix bug - Turn on DEBUG_DOUBLEFAULT, booting SMP kernel crash Signed-off-by: Graf Yang Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index c13fa8da28c7..bde6dc4e2614 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -277,7 +277,7 @@ ENTRY(_bfin_return_from_exception) p5.h = hi(ILAT); r6 = [p5]; r7 = 0x20; /* Did I just cause anther HW error? */ - r7 = r7 & r1; + r6 = r7 & r6; CC = R7 == R6; if CC JUMP _double_fault; #endif -- cgit v1.2.3 From 62273eeb6ac516ab0abf49417378726ad8875b03 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 18 Nov 2008 17:48:22 +0800 Subject: Blackfin arch: fix a broken define in dma-mapping dma_mapping_error is an actual function, so fix broken define with a real inline stub Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/dma-mapping.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index ede748d67efd..d7d9148e433c 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -15,7 +15,11 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -#define dma_mapping_error +static inline +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} /* * Map a single buffer of the indicated size for DMA in streaming mode. -- cgit v1.2.3 From 80bf272468a8b63f5550304363e55c1ba06c13db Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 18 Nov 2008 10:48:41 +0100 Subject: ALSA: hda - Add quirks for HP Pavilion DV models Added the quirk entries for HP Pavilion DV5 and DV7 with model=hp-m4. Reference: Novell bnc#445321, bnc#445161 https://bugzilla.novell.com/show_bug.cgi?id=445321 https://bugzilla.novell.com/show_bug.cgi?id=445161 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index b254e90b47ca..25d4bf8e422f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1688,6 +1688,10 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_92HD71BXX_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f2, + "HP dv5", STAC_HP_M4), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4, + "HP dv7", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a, "unknown HP", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233, -- cgit v1.2.3 From c5d08bb567874e410210cf7d21a25f28fcceb0a7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 18 Nov 2008 10:55:36 +0100 Subject: ALSA: hda - Fix resume of GPIO unsol event for STAC/IDT Use cached write for setting the GPIO unsolicited event mask to be restored properly at resume. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 25d4bf8e422f..9563b5bbb272 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4502,7 +4502,7 @@ again: switch (spec->board_config) { case STAC_HP_M4: /* Enable VREF power saving on GPIO1 detect */ - snd_hda_codec_write(codec, codec->afg, 0, + snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x02); snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_UNSOLICITED_ENABLE, @@ -4895,7 +4895,7 @@ static int patch_stac9205(struct hda_codec *codec) stac92xx_set_config_reg(codec, 0x20, 0x1c410030); /* Enable unsol response for GPIO4/Dock HP connection */ - snd_hda_codec_write(codec, codec->afg, 0, + snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x10); snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_UNSOLICITED_ENABLE, -- cgit v1.2.3 From eb60fa1066622ddb2278732cf61e0c4544e82c6f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 15:28:59 +0900 Subject: block: fix add_partition() error path Partition stats structure was not freed on devt allocation failure path. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/partitions/check.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 633f7a0ebb2c..90bcf136a9de 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -395,7 +395,7 @@ int add_partition(struct gendisk *disk, int partno, err = blk_alloc_devt(p, &devt); if (err) - goto out_free; + goto out_free_stats; pdev->devt = devt; /* delay uevent until 'holders' subdir is created */ @@ -426,6 +426,8 @@ int add_partition(struct gendisk *disk, int partno, return 0; +out_free_stats: + free_part_stats(p); out_free: kfree(p); return err; -- cgit v1.2.3 From ba32929a91fe2c0628f5be62d1597b379c8d3062 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 15:29:58 +0900 Subject: block: make add_partition() return pointer to hd_struct Make add_partition() return pointer to the new hd_struct on success and ERR_PTR() value on failure. This change will be used to fix md autodetection bug. Signed-off-by: Tejun Heo Cc: Neil Brown Signed-off-by: Jens Axboe --- block/ioctl.c | 7 +++---- fs/partitions/check.c | 25 +++++++++++++------------ include/linux/genhd.h | 4 +++- 3 files changed, 19 insertions(+), 17 deletions(-) diff --git a/block/ioctl.c b/block/ioctl.c index c832d639b6e2..d03985b04d67 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -18,7 +18,6 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user struct disk_part_iter piter; long long start, length; int partno; - int err; if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -61,10 +60,10 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user disk_part_iter_exit(&piter); /* all seems OK */ - err = add_partition(disk, partno, start, length, - ADDPART_FLAG_NONE); + part = add_partition(disk, partno, start, length, + ADDPART_FLAG_NONE); mutex_unlock(&bdev->bd_mutex); - return err; + return IS_ERR(part) ? PTR_ERR(part) : 0; case BLKPG_DEL_PARTITION: part = disk_get_part(disk, partno); if (!part) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 90bcf136a9de..633025340239 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -348,8 +348,8 @@ static ssize_t whole_disk_show(struct device *dev, static DEVICE_ATTR(whole_disk, S_IRUSR | S_IRGRP | S_IROTH, whole_disk_show, NULL); -int add_partition(struct gendisk *disk, int partno, - sector_t start, sector_t len, int flags) +struct hd_struct *add_partition(struct gendisk *disk, int partno, + sector_t start, sector_t len, int flags) { struct hd_struct *p; dev_t devt = MKDEV(0, 0); @@ -361,15 +361,15 @@ int add_partition(struct gendisk *disk, int partno, err = disk_expand_part_tbl(disk, partno); if (err) - return err; + return ERR_PTR(err); ptbl = disk->part_tbl; if (ptbl->part[partno]) - return -EBUSY; + return ERR_PTR(-EBUSY); p = kzalloc(sizeof(*p), GFP_KERNEL); if (!p) - return -ENOMEM; + return ERR_PTR(-EBUSY); if (!init_part_stats(p)) { err = -ENOMEM; @@ -424,20 +424,20 @@ int add_partition(struct gendisk *disk, int partno, if (!ddev->uevent_suppress) kobject_uevent(&pdev->kobj, KOBJ_ADD); - return 0; + return p; out_free_stats: free_part_stats(p); out_free: kfree(p); - return err; + return ERR_PTR(err); out_del: kobject_put(p->holder_dir); device_del(pdev); out_put: put_device(pdev); blk_free_devt(devt); - return err; + return ERR_PTR(err); } /* Not exported, helper to add_disk(). */ @@ -568,10 +568,11 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev) disk->disk_name, p, (unsigned long long) size); size = get_capacity(disk) - from; } - res = add_partition(disk, p, from, size, state->parts[p].flags); - if (res) { - printk(KERN_ERR " %s: p%d could not be added: %d\n", - disk->disk_name, p, -res); + part = add_partition(disk, p, from, size, + state->parts[p].flags); + if (IS_ERR(part)) { + printk(KERN_ERR " %s: p%d could not be added: %ld\n", + disk->disk_name, p, -PTR_ERR(part)); continue; } #ifdef CONFIG_BLK_DEV_MD diff --git a/include/linux/genhd.h b/include/linux/genhd.h index e439e6aed832..3df7742ce246 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -522,7 +522,9 @@ extern char *disk_name (struct gendisk *hd, int partno, char *buf); extern int disk_expand_part_tbl(struct gendisk *disk, int target); extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev); -extern int __must_check add_partition(struct gendisk *, int, sector_t, sector_t, int); +extern struct hd_struct * __must_check add_partition(struct gendisk *disk, + int partno, sector_t start, + sector_t len, int flags); extern void delete_partition(struct gendisk *, int); extern void printk_all_partitions(void); -- cgit v1.2.3 From 55e8e30c382d25c34f8aafcc78efec948571a941 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 15:30:47 +0900 Subject: block/md: fix md autodetection Block ext devt conversion missed md_autodetect_dev() call in rescan_partitions() leaving md autodetect unable to see partitions. Fix it. Signed-off-by: Tejun Heo Cc: Neil Brown Signed-off-by: Jens Axboe --- fs/partitions/check.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 633025340239..6d5b213b8a9b 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -577,7 +577,7 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev) } #ifdef CONFIG_BLK_DEV_MD if (state->parts[p].flags & ADDPART_FLAG_RAID) - md_autodetect_dev(bdev->bd_dev+p); + md_autodetect_dev(part_to_dev(part)->devt); #endif } kfree(state); -- cgit v1.2.3 From 561ec68e4de7947167937c49c451728e6b19e63b Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Fri, 14 Nov 2008 08:26:30 +0100 Subject: block: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash We run into system boot failure with kernel 2.6.28-rc. We found it on a couple of machines, including T61 notebook, nehalem machine, and another HPC NX6325 notebook. All the machines use FedoraCore 8 or FedoraCore 9. With kernel prior to 2.6.28-rc, system boot doesn't fail. I debug it and locate the root cause. Pls. see http://bugzilla.kernel.org/show_bug.cgi?id=11899 https://bugzilla.redhat.com/show_bug.cgi?id=471517 As a matter of fact, there are 2 bugs. 1)root=/dev/sda1, system boot randomly fails. Mostly, boot for 5 times and fails once. nash has a bug. Some of its functions misuse return value 0. Sometimes, 0 means timeout and no uevent available. Sometimes, 0 means nash gets an uevent, but the uevent isn't block-related (for exmaple, usb). If by coincidence, kernel tells nash that uevents are available, but kernel also set timeout, nash might stops collecting other uevents in queue if current uevent isn't block-related. I work out a patch for nash to fix it. http://bugzilla.kernel.org/attachment.cgi?id=18858 2) root=LABEL=/, system always can't boot. initrd init reports switchroot fails. Here is an executation branch of nash when booting: (1) nash read /sys/block/sda/dev; Assume major is 8 (on my desktop) (2) nash query /proc/devices with the major number; It found line "8 sd"; (3) nash use 'sd' to search its own probe table to find device (DISK) type for the device and add it to its own list; (4) Later on, it probes all devices in its list to get filesystem labels; scsi register "8 sd" always. When major is 259, nash fails to find the device(DISK) type. I enables CONFIG_DEBUG_BLOCK_EXT_DEVT=y when compiling kernel, so 259 is picked up for device /dev/sda1, which causes nash to fail to find device (DISK) type. To fixing issue 2), I create a patch for nash and another patch for kernel. http://bugzilla.kernel.org/attachment.cgi?id=18859 http://bugzilla.kernel.org/attachment.cgi?id=18837 Below is the patch for kernel 2.6.28-rc4. It registers blkext, a new block device in proc/devices. With 2 patches on nash and 1 patch on kernel, I boot my machines for dozens of times without failure. Signed-off-by Zhang Yanmin Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- block/genhd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/block/genhd.c b/block/genhd.c index 4e5e7493f676..27549e470da5 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -768,6 +768,8 @@ static int __init genhd_device_init(void) bdev_map = kobj_map_init(base_probe, &block_class_lock); blk_dev_init(); + register_blkdev(BLOCK_EXT_MAJOR, "blkext"); + #ifndef CONFIG_SYSFS_DEPRECATED /* create top-level block dir */ block_depr = kobject_create_and_add("block", NULL); -- cgit v1.2.3 From 68aee07f9bad2c830a898cf6d6bfc11ea24efc40 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Fri, 14 Nov 2008 09:44:33 +0100 Subject: Release old elevator on change elevator We should release old elevator when change to use a new one. Signed-off-by: Zhao Lei Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index b220c686089d..2d19f0cc47f2 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -338,12 +338,18 @@ wait: static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) { struct request_queue *rq; + elevator_t *old_e; rq = blk_init_queue(do_blkif_request, &blkif_io_lock); if (rq == NULL) return -1; - elevator_init(rq, "noop"); + old_e = rq->elevator; + if (IS_ERR_VALUE(elevator_init(rq, "noop"))) + printk(KERN_WARNING + "blkfront: Switch elevator failed, use default\n"); + else + elevator_exit(old_e); /* Hard sector size and max sectors impersonate the equiv. hardware. */ blk_queue_hardsect_size(rq, sector_size); -- cgit v1.2.3 From 98ba4031ab2adc8b394295e68aa4c8fe9d5060db Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Fri, 14 Nov 2008 10:44:59 +0100 Subject: relay: fix cpu offline problem relay_open() will close allocated buffers when failed. but if cpu offlined, some buffer will not be closed. this patch fixed it. and did cleanup for relay_reset() too. Signed-off-by: Lai Jiangshan Signed-off-by: Jens Axboe --- kernel/relay.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/kernel/relay.c b/kernel/relay.c index 8d13a7855c08..32b0befdcb6a 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -400,7 +400,7 @@ void relay_reset(struct rchan *chan) } mutex_lock(&relay_channels_mutex); - for_each_online_cpu(i) + for_each_possible_cpu(i) if (chan->buf[i]) __relay_reset(chan->buf[i], 0); mutex_unlock(&relay_channels_mutex); @@ -611,10 +611,9 @@ struct rchan *relay_open(const char *base_filename, return chan; free_bufs: - for_each_online_cpu(i) { - if (!chan->buf[i]) - break; - relay_close_buf(chan->buf[i]); + for_each_possible_cpu(i) { + if (chan->buf[i]) + relay_close_buf(chan->buf[i]); } kref_put(&chan->kref, relay_destroy_channel); -- cgit v1.2.3 From c26156b2534c75bb3cdedf76f6ad1340971cf5bd Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 18 Nov 2008 15:07:05 +0100 Subject: block: hold extra reference to bio in blk_rq_map_user_iov() If the size passed in is OK but we end up mapping too many segments, we call the unmap path directly like from IO completion. But from IO completion we have an extra reference to the bio, so this error case goes OOPS when it attempts to free and already free bio. Fix it by getting an extra reference to the bio before calling the unmap failure case. Reported-by: Petr Vandrovec Signed-off-by: Jens Axboe --- block/blk-map.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/block/blk-map.c b/block/blk-map.c index 4849fa36161e..0f4b4b881811 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -217,6 +217,12 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq, return PTR_ERR(bio); if (bio->bi_size != len) { + /* + * Grab an extra reference to this bio, as bio_unmap_user() + * expects to be able to drop it twice as it happens on the + * normal IO completion path + */ + bio_get(bio); bio_endio(bio, 0); bio_unmap_user(bio); return -EINVAL; -- cgit v1.2.3 From 10db4ef7b9a65b86e4d047671a1886f4c101a859 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 18 Nov 2008 15:23:08 +0100 Subject: x86, PEBS/DS: fix code flow in ds_request() this compiler warning: arch/x86/kernel/ds.c: In function 'ds_request': arch/x86/kernel/ds.c:368: warning: 'context' may be used uninitialized in this function Shows that the code flow in ds_request() is buggy - it goes into the unlock+release-context path even when the context is not allocated yet. First allocate the context, then do the other checks. Also, take care with GFP allocations under the ds_lock spinlock. Cc: Signed-off-by: Ingo Molnar --- arch/x86/kernel/ds.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index ac1d5b0586ba..d1a121443bde 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -236,17 +236,33 @@ static inline struct ds_context *ds_alloc_context(struct task_struct *task) struct ds_context *context = *p_context; if (!context) { + spin_unlock(&ds_lock); + context = kzalloc(sizeof(*context), GFP_KERNEL); - if (!context) + if (!context) { + spin_lock(&ds_lock); return NULL; + } context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL); if (!context->ds) { kfree(context); + spin_lock(&ds_lock); return NULL; } + spin_lock(&ds_lock); + /* + * Check for race - another CPU could have allocated + * it meanwhile: + */ + if (*p_context) { + kfree(context->ds); + kfree(context); + return *p_context; + } + *p_context = context; context->this = p_context; @@ -384,15 +400,15 @@ static int ds_request(struct task_struct *task, void *base, size_t size, spin_lock(&ds_lock); - error = -EPERM; - if (!check_tracer(task)) - goto out_unlock; - error = -ENOMEM; context = ds_alloc_context(task); if (!context) goto out_unlock; + error = -EPERM; + if (!check_tracer(task)) + goto out_unlock; + error = -EALREADY; if (context->owner[qual] == current) goto out_unlock; -- cgit v1.2.3 From e5e1f606ecbf67e52ebe2df5d14f8b94ec6544d0 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 17 Nov 2008 15:07:17 +0100 Subject: AMD IOMMU: add parameter to disable device isolation Impact: add a new AMD IOMMU kernel command line parameter Signed-off-by: Joerg Roedel --- Documentation/kernel-parameters.txt | 2 ++ arch/x86/kernel/amd_iommu_init.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9fa6508892c2..b56ee02d2514 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -295,6 +295,8 @@ and is between 256 and 4096 characters. It is defined in the file isolate - enable device isolation (each device, as far as possible, will get its own protection domain) + share - put every device behind one IOMMU into the + same protection domain fullflush - enable flushing of IO/TLB entries when they are unmapped. Otherwise they are flushed before they will be reused, which diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 0cdcda35a05f..838a2e1d5bb2 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -1213,6 +1213,8 @@ static int __init parse_amd_iommu_options(char *str) for (; *str; ++str) { if (strncmp(str, "isolate", 7) == 0) amd_iommu_isolate = 1; + if (strncmp(str, "share", 5) == 0) + amd_iommu_isolate = 0; if (strncmp(str, "fullflush", 11) == 0) amd_iommu_unmap_flush = true; } -- cgit v1.2.3 From 3ce1f93c6d53c3f91c3846cf66b018276c8ac2e7 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 17 Nov 2008 15:09:20 +0100 Subject: AMD IOMMU: enable device isolation per default Impact: makes device isolation the default for AMD IOMMU Some device drivers showed double-free bugs of DMA memory while testing them with AMD IOMMU. If all devices share the same protection domain this can lead to data corruption and data loss. Prevent this by putting each device into its own protection domain per default. Signed-off-by: Joerg Roedel --- Documentation/kernel-parameters.txt | 2 +- arch/x86/kernel/amd_iommu_init.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b56ee02d2514..f2e1e7fc0ffd 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -294,7 +294,7 @@ and is between 256 and 4096 characters. It is defined in the file Possible values are: isolate - enable device isolation (each device, as far as possible, will get its own protection - domain) + domain) [default] share - put every device behind one IOMMU into the same protection domain fullflush - enable flushing of IO/TLB entries when diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 838a2e1d5bb2..595edd2befc6 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -121,7 +121,7 @@ u16 amd_iommu_last_bdf; /* largest PCI device id we have LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings we find in ACPI */ unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */ -int amd_iommu_isolate; /* if 1, device isolation is enabled */ +int amd_iommu_isolate = 1; /* if 1, device isolation is enabled */ bool amd_iommu_unmap_flush; /* if true, flush on every unmap */ LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the -- cgit v1.2.3 From 695b5676c727d80921a2dc8737d5b3322222db85 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 17 Nov 2008 15:16:43 +0100 Subject: AMD IOMMU: fix fullflush comparison length Impact: fix comparison length for 'fullflush' Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 595edd2befc6..30ae2701b3df 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -1215,7 +1215,7 @@ static int __init parse_amd_iommu_options(char *str) amd_iommu_isolate = 1; if (strncmp(str, "share", 5) == 0) amd_iommu_isolate = 0; - if (strncmp(str, "fullflush", 11) == 0) + if (strncmp(str, "fullflush", 9) == 0) amd_iommu_unmap_flush = true; } -- cgit v1.2.3 From 8501c45cc32c311ae755a2d5ac8c4a5f04908d42 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 17 Nov 2008 19:11:46 +0100 Subject: AMD IOMMU: check for next_bit also in unmapped area Impact: fix possible use of stale IO/TLB entries Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 331b318304eb..e4899e0e8787 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -537,7 +537,7 @@ static void dma_ops_free_addresses(struct dma_ops_domain *dom, address >>= PAGE_SHIFT; iommu_area_free(dom->bitmap, address, pages); - if (address + pages >= dom->next_bit) + if (address >= dom->next_bit) dom->need_flush = true; } -- cgit v1.2.3 From 0af40a4b1050c050e62eb1dc30b82d5ab22bf221 Mon Sep 17 00:00:00 2001 From: Philipp Kohlbecher Date: Sun, 16 Nov 2008 12:11:01 +0100 Subject: x86: more general identifier for Phoenix BIOS Impact: widen the reach of the low-memory-protect DMI quirk Phoenix BIOSes variously identify their vendor as "Phoenix Technologies, LTD" or "Phoenix Technologies LTD" (without the comma.) This patch makes the identification string in the bad_bios_dmi_table more general (following a suggestion by Ingo Molnar), so that both versions are handled. Again, the patched file compiles cleanly and the patch has been tested successfully on my machine. Signed-off-by: Philipp Kohlbecher Cc: Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 0fa6790c1dd3..9d5674f7b6cc 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -764,7 +764,7 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { .callback = dmi_low_memory_corruption, .ident = "Phoenix BIOS", .matches = { - DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"), }, }, #endif -- cgit v1.2.3 From 0bb943c7a2136716757a263f604d26309fd98042 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 14 Nov 2008 19:05:31 +0100 Subject: tracing: kernel/trace/trace.c: introduce missing kfree() Impact: fix memory leak Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 697eda36b86a..d86e3252f300 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1936,6 +1936,7 @@ __tracing_open(struct inode *inode, struct file *file, int *ret) ring_buffer_read_finish(iter->buffer_iter[cpu]); } mutex_unlock(&trace_types_lock); + kfree(iter); return ERR_PTR(-ENOMEM); } -- cgit v1.2.3 From a6a0c4ca7edb378a8a7332501f097089cb1051c4 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 18 Nov 2008 06:56:51 -0800 Subject: suspend: use WARN not WARN_ON to print the message By using WARN(), kerneloops.org can collect which component is causing the delay and make statistics about that. suspend_test_finish() is currently the number 2 item but unless we can collect who's causing it we're not going to be able to fix the hot topic ones.. Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- kernel/power/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/power/main.c b/kernel/power/main.c index 19122cf6d827..b8f7ce9473e8 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -174,7 +174,7 @@ static void suspend_test_finish(const char *label) * has some performance issues. The stack dump of a WARN_ON * is more likely to get the right attention than a printk... */ - WARN_ON(msec > (TEST_SUSPEND_SECONDS * 1000)); + WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label); } #else -- cgit v1.2.3 From 66359f849074c55fb80d15235ea5b99f1918663c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 18 Nov 2008 15:12:42 +0800 Subject: Parport driver: disable pc-style parport on Blackfin systems Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Linus Torvalds --- drivers/parport/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 209b4a464bcf..855f389eea40 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -36,7 +36,7 @@ if PARPORT config PARPORT_PC tristate "PC-style hardware" depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \ - (!M68K || ISA) && !MN10300 && !AVR32 + (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN ---help--- You should say Y here if you have a PC-style parallel port. All IBM PC compatible computers and some Alphas have PC-style -- cgit v1.2.3 From bfb59820ee46616a7bdb4af6b8f7e109646de6ec Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 18 Nov 2008 16:33:48 +0000 Subject: [CIFS] fix check for dead tcon in smb_init This was recently changed to check for need_reconnect, but should actually be a check for a tidStatus of CifsExiting. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/CHANGES | 6 +++++- fs/cifs/cifssmb.c | 2 +- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 8855331b2fba..e078b7aea143 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -8,7 +8,11 @@ handling fcntl(F_SETLEASE). Convert cifs to using blocking tcp sends, and also let tcp autotune the socket send and receive buffers. This reduces the number of EAGAIN errors returned by TCP/IP in high stress workloads (and the number of retries on socket writes -when sending large SMBWriteX requests). +when sending large SMBWriteX requests). Fix case in which a portion of +data can in some cases not get written to the file on the server before the +file is closed. Fix DFS parsing to properly handle path consumed field, +and to handle certain codepage conversions better. Fix mount and +umount race that can cause oops in mount or umount or reconnect. Version 1.54 ------------ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index bdda46dd435a..2af8626ced43 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -295,7 +295,7 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, check for tcp and smb session status done differently for those three - in the calling routine */ if (tcon) { - if (tcon->need_reconnect) { + if (tcon->tidStatus == CifsExiting) { /* only tree disconnect, open, and write, (and ulogoff which does not have tcon) are allowed as we start force umount */ -- cgit v1.2.3 From 641d2f63cfe24539e154efa2f932937934c27dde Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 18 Nov 2008 19:22:13 +0100 Subject: trace: introduce missing mutex_unlock() Impact: fix tracing buffer mutex leak in case of allocation failure This error was spotted by this semantic patch: http://www.emn.fr/x-info/coccinelle/mut.html It looks correct as far as I can tell. Please review. Signed-off-by: Vegard Nossum Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 036456cbb4f7..f780e9552f91 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -617,6 +617,7 @@ int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size) list_del_init(&page->list); free_buffer_page(page); } + mutex_unlock(&buffer->mutex); return -ENOMEM; } -- cgit v1.2.3 From 093bac154c142fa1fb31a3ac69ae1bc08930231b Mon Sep 17 00:00:00 2001 From: Steve Conklin Date: Fri, 14 Nov 2008 00:55:51 -0600 Subject: x86: quirk for reboot stalls on a Dell Optiplex 330 Dell Optiplex 330 appears to hang on reboot. This is resolved by adding a quirk to set bios reboot. Signed-off-by: Leann Ogasawara Signed-off-by: Steve Conklin Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 724adfc63cb9..cc5a2545dd41 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -169,6 +169,15 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "0KW626"), }, }, + { /* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */ + .callback = set_bios_reboot, + .ident = "Dell OptiPlex 330", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 330"), + DMI_MATCH(DMI_BOARD_NAME, "0KP561"), + }, + }, { /* Handle problems with rebooting on Dell 2400's */ .callback = set_bios_reboot, .ident = "Dell PowerEdge 2400", -- cgit v1.2.3 From 20a4a236c7de5c915551cdc562482aa53eaff40e Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Thu, 13 Nov 2008 18:06:04 -0800 Subject: x86: uaccess_64: fix return value in __copy_from_user() __copy_from_user() will return invalid value 16 when it fails to access user space and the size is 10. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uaccess_64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h index 664f15280f14..f8cfd00db450 100644 --- a/arch/x86/include/asm/uaccess_64.h +++ b/arch/x86/include/asm/uaccess_64.h @@ -46,7 +46,7 @@ int __copy_from_user(void *dst, const void __user *src, unsigned size) return ret; case 10: __get_user_asm(*(u64 *)dst, (u64 __user *)src, - ret, "q", "", "=r", 16); + ret, "q", "", "=r", 10); if (unlikely(ret)) return ret; __get_user_asm(*(u16 *)(8 + (char *)dst), -- cgit v1.2.3 From 9b44fb89cab6e01816cdc05d6b59fdcf8100b8c3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 29 Oct 2008 23:24:14 +0100 Subject: libertas_tf: fix skb tail pointer skb->tail can't be meant here because it's not the same across 32/64 bit compilations. This means there's no way the current driver can work on 64-bit architectures. Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.27] Signed-off-by: John W. Linville --- drivers/net/wireless/libertas_tf/if_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c index 1cc03a8dd67a..59634c33b1f9 100644 --- a/drivers/net/wireless/libertas_tf/if_usb.c +++ b/drivers/net/wireless/libertas_tf/if_usb.c @@ -331,7 +331,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, /* Fill the receive configuration URB and initialise the Rx call back */ usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, usb_rcvbulkpipe(cardp->udev, cardp->ep_in), - (void *) (skb->tail), + skb_tail_pointer(skb), MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp); cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET; -- cgit v1.2.3 From 8e3bad65a59915f2ddc40f62a180ad81695d8440 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 17 Nov 2008 10:59:59 +0100 Subject: mac80211: remove ieee80211_notify_mac Before ieee80211_notify_mac() was added, it was presented with the use case of using it to tell mac80211 that the association may have been lost because the firmware crashed/reset. Since then, it has also been used by iwlwifi to (slightly) speed up re-association after resume, a workaround around the fact that mac80211 has no suspend/resume handling yet. It is also not used by any other drivers, so clearly it cannot be necessary for "good enough" suspend/resume. Unfortunately, the callback suffers from a severe problem: It only works for station mode. If suspend/resume happens while in IBSS or any other mode (but station), then the callback is pointless. Recently, it has created a number of locking issues, first because it required rtnl locking rather than RCU due to calling sleeping functions within the critical section, and now because it's called by iwlwifi from the mac80211 workqueue that may not use the rtnl because it is flushed under rtnl. (cf. http://bugzilla.kernel.org/show_bug.cgi?id=12046) I think, therefore, that we should take a step back, remove it entirely for now and add the small feature it provided properly. For suspend and resume we will need to introduce new hooks, and for the case where the firmware was reset the driver will probably simply just pretend it has done a suspend/resume cycle to get mac80211 to reprogram the hardware completely, not just try to connect to the current AP again in station mode. When doing so, we will need to take into account locking issues and possibly defer to schedule_work from within mac80211 for the resume operation, while the suspend operation must be done directly. Proper suspend/resume should also not necessarily try to reconnect to the current AP, the time spent in suspend may have been short enough to not be disconnected from the AP, mac80211 will detect that the AP went out of range quickly if it did, and if the association is lost then the AP will disassoc as soon as a data frame is sent. We might also take into account WWOL then, and have mac80211 program the hardware into such a mode where it is available and requested. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 1 - drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 - include/net/mac80211.h | 20 -------------------- net/mac80211/mlme.c | 22 ---------------------- 4 files changed, 44 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 8d690a0eb1a9..6751bb2b8ae2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2341,7 +2341,6 @@ static void iwl_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl_alive_start(priv); mutex_unlock(&priv->mutex); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl4965_bg_rf_kill(struct work_struct *work) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 285b53e7e261..45a6b0c35695 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6012,7 +6012,6 @@ static void iwl3945_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl3945_alive_start(priv); mutex_unlock(&priv->mutex); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl3945_bg_rf_kill(struct work_struct *work) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8856e2d60e9f..73d81bc6aa75 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -73,14 +73,6 @@ * not do so then mac80211 may add this under certain circumstances. */ -/** - * enum ieee80211_notification_type - Low level driver notification - * @IEEE80211_NOTIFY_RE_ASSOC: start the re-association sequence - */ -enum ieee80211_notification_types { - IEEE80211_NOTIFY_RE_ASSOC, -}; - /** * struct ieee80211_ht_bss_info - describing BSS's HT characteristics * @@ -1797,18 +1789,6 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid); void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, u16 tid); -/** - * ieee80211_notify_mac - low level driver notification - * @hw: pointer as obtained from ieee80211_alloc_hw(). - * @notif_type: enum ieee80211_notification_types - * - * This function must be called by low level driver to inform mac80211 of - * low level driver status change or force mac80211 to re-assoc for low - * level driver internal error that require re-assoc. - */ -void ieee80211_notify_mac(struct ieee80211_hw *hw, - enum ieee80211_notification_types notif_type); - /** * ieee80211_find_sta - find a station * diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 14d165f0df75..409bb7716236 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2560,25 +2560,3 @@ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) ieee80211_restart_sta_timer(sdata); rcu_read_unlock(); } - -/* driver notification call */ -void ieee80211_notify_mac(struct ieee80211_hw *hw, - enum ieee80211_notification_types notif_type) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct ieee80211_sub_if_data *sdata; - - switch (notif_type) { - case IEEE80211_NOTIFY_RE_ASSOC: - rtnl_lock(); - list_for_each_entry(sdata, &local->interfaces, list) { - if (sdata->vif.type != NL80211_IFTYPE_STATION) - continue; - - ieee80211_sta_req_auth(sdata, &sdata->u.sta); - } - rtnl_unlock(); - break; - } -} -EXPORT_SYMBOL(ieee80211_notify_mac); -- cgit v1.2.3 From 4018517a1a69a85c3d61b20fa02f187b80773137 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 18 Nov 2008 01:47:21 +0100 Subject: iwlagn: fix RX skb alignment So I dug deeper into the DMA problems I had with iwlagn and a kind soul helped me in that he said something about pci-e alignment and mentioned the iwl_rx_allocate function to check for crossing 4KB boundaries. Since there's 8KB A-MPDU support, crossing 4k boundaries didn't seem like something the device would fail with, but when I looked into the function for a minute anyway I stumbled over this little gem: BUG_ON(rxb->dma_addr & (~DMA_BIT_MASK(36) & 0xff)); Clearly, that is a totally bogus check, one would hope the compiler removes it entirely. (Think about it) After fixing it, I obviously ran into it, nothing guarantees the alignment the way you want it, because of the way skbs and their headroom are allocated. I won't explain that here nor double-check that I'm right, that goes beyond what most of the CC'ed people care about. So then I came up with the patch below, and so far my system has survived minutes with 64K pages, when it would previously fail in seconds. And I haven't seen a single instance of the TX bug either. But when you see the patch it'll be pretty obvious to you why. This should fix the following reported kernel bugs: http://bugzilla.kernel.org/show_bug.cgi?id=11596 http://bugzilla.kernel.org/show_bug.cgi?id=11393 http://bugzilla.kernel.org/show_bug.cgi?id=11983 I haven't checked if there are any elsewhere, but I suppose RHBZ will have a few instances too... I'd like to ask anyone who is CC'ed (those are people I know ran into the bug) to try this patch. I am convinced that this patch is correct in spirit, but I haven't understood why, for example, there are so many unmap calls. I'm not entirely convinced that this is the only bug leading to the TX reply errors. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 6 +++--- drivers/net/wireless/iwlwifi/iwl-dev.h | 3 ++- drivers/net/wireless/iwlwifi/iwl-rx.c | 26 +++++++++++++++++--------- 3 files changed, 22 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 6751bb2b8ae2..444c5cc05f03 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1384,7 +1384,7 @@ void iwl_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr, + pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr, priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; @@ -1436,8 +1436,8 @@ void iwl_rx_handle(struct iwl_priv *priv) rxb->skb = NULL; } - pci_unmap_single(priv->pci_dev, rxb->dma_addr, - priv->hw_params.rx_buf_size, + pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, + priv->hw_params.rx_buf_size + 256, PCI_DMA_FROMDEVICE); spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &priv->rxq.rx_used); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index c018121085e9..9966d4e384ce 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -89,7 +89,8 @@ extern struct iwl_cfg iwl5100_abg_cfg; #define DEFAULT_LONG_RETRY_LIMIT 4U struct iwl_rx_mem_buffer { - dma_addr_t dma_addr; + dma_addr_t real_dma_addr; + dma_addr_t aligned_dma_addr; struct sk_buff *skb; struct list_head list; }; diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 7cde9d76ff5d..0509c16dbe75 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -204,7 +204,7 @@ int iwl_rx_queue_restock(struct iwl_priv *priv) list_del(element); /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->dma_addr); + rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->aligned_dma_addr); rxq->queue[rxq->write] = rxb; rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; rxq->free_count--; @@ -251,7 +251,7 @@ void iwl_rx_allocate(struct iwl_priv *priv) rxb = list_entry(element, struct iwl_rx_mem_buffer, list); /* Alloc a new receive buffer */ - rxb->skb = alloc_skb(priv->hw_params.rx_buf_size, + rxb->skb = alloc_skb(priv->hw_params.rx_buf_size + 256, __GFP_NOWARN | GFP_ATOMIC); if (!rxb->skb) { if (net_ratelimit()) @@ -266,9 +266,17 @@ void iwl_rx_allocate(struct iwl_priv *priv) list_del(element); /* Get physical address of RB/SKB */ - rxb->dma_addr = - pci_map_single(priv->pci_dev, rxb->skb->data, - priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE); + rxb->real_dma_addr = pci_map_single( + priv->pci_dev, + rxb->skb->data, + priv->hw_params.rx_buf_size + 256, + PCI_DMA_FROMDEVICE); + /* dma address must be no more than 36 bits */ + BUG_ON(rxb->real_dma_addr & ~DMA_BIT_MASK(36)); + /* and also 256 byte aligned! */ + rxb->aligned_dma_addr = ALIGN(rxb->real_dma_addr, 256); + skb_reserve(rxb->skb, rxb->aligned_dma_addr - rxb->real_dma_addr); + list_add_tail(&rxb->list, &rxq->rx_free); rxq->free_count++; } @@ -300,8 +308,8 @@ void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { if (rxq->pool[i].skb != NULL) { pci_unmap_single(priv->pci_dev, - rxq->pool[i].dma_addr, - priv->hw_params.rx_buf_size, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size + 256, PCI_DMA_FROMDEVICE); dev_kfree_skb(rxq->pool[i].skb); } @@ -354,8 +362,8 @@ void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) * to an SKB, so we need to unmap and free potential storage */ if (rxq->pool[i].skb != NULL) { pci_unmap_single(priv->pci_dev, - rxq->pool[i].dma_addr, - priv->hw_params.rx_buf_size, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size + 256, PCI_DMA_FROMDEVICE); priv->alloc_rxb_skb--; dev_kfree_skb(rxq->pool[i].skb); -- cgit v1.2.3 From f10ed36ec1118c6f9523cd7e53cb0aadb53efe9f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 7 Nov 2008 22:36:02 -0500 Subject: ftrace: fix set_ftrace_filter Impact: fix of output of set_ftrace_filter The commit "ftrace: do not show freed records in available_filter_functions" Removed a bit too much from the set_ftrace_filter code, where we now see all functions in the set_ftrace_filter file even when we set a filter. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ftrace.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 4a39d24568c8..dcac7418f688 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -738,6 +738,9 @@ t_next(struct seq_file *m, void *v, loff_t *pos) ((iter->flags & FTRACE_ITER_FAILURES) && !(rec->flags & FTRACE_FL_FAILED)) || + ((iter->flags & FTRACE_ITER_FILTER) && + !(rec->flags & FTRACE_FL_FILTER)) || + ((iter->flags & FTRACE_ITER_NOTRACE) && !(rec->flags & FTRACE_FL_NOTRACE))) { rec = NULL; -- cgit v1.2.3 From 820432783190b4096499e38a4a4d7095c511913d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 18 Nov 2008 23:57:14 -0500 Subject: ftrace: make filtered functions effective on setting Impact: fix filter selection to apply when set It can be confusing when the set_filter_functions is set (or cleared) and the functions being recorded by the dynamic tracer does not match. This patch causes the code to be updated if the function tracer is enabled and the filter is changed. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index dcac7418f688..5cbddb59e99f 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -1189,7 +1189,7 @@ ftrace_regex_release(struct inode *inode, struct file *file, int enable) mutex_lock(&ftrace_sysctl_lock); mutex_lock(&ftrace_start_lock); - if (iter->filtered && ftrace_start && ftrace_enabled) + if (ftrace_start && ftrace_enabled) ftrace_run_update_code(FTRACE_ENABLE_CALLS); mutex_unlock(&ftrace_start_lock); mutex_unlock(&ftrace_sysctl_lock); -- cgit v1.2.3 From 32464779a1b8c15e9aa9aa0306b2f735080df9d8 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 18 Nov 2008 20:33:02 -0500 Subject: ftrace: fix dyn ftrace filter selection Impact: clean up and fix for dyn ftrace filter selection The previous logic of the dynamic ftrace selection of enabling or disabling functions was complex and incorrect. This patch simplifies the code and corrects the usage. This simplification also makes the code more robust. Here is the correct logic: Given a function that can be traced by dynamic ftrace: If the function is not to be traced, disable it if it was enabled. (this is if the function is in the set_ftrace_notrace file) (filter is on if there exists any functions in set_ftrace_filter file) If the filter is on, and we are enabling functions: If the function is in set_ftrace_filter, enable it if it is not already enabled. If the function is not in set_ftrace_filter, disable it if it is not already disabled. Otherwise, if the filter is off and we are enabling function tracing: Enable the function if it is not already enabled. Otherwise, if we are disabling function tracing: Disable the function if it is not already disabled. This code now sets or clears the ENABLED flag in the record, and at the end it will enable the function if the flag is set, or disable the function if the flag is cleared. The parameters for the function that does the above logic is also simplified. Instead of passing in confusing "new" and "old" where they might be swapped if the "enabled" flag is not set. The old logic even had one of the above always NULL and had to be filled in. The new logic simply passes in one parameter called "nop". A "call" is calculated in the code, and at the end of the logic, when we know we need to either disable or enable the function, we can then use the "nop" and "call" properly. This code is more robust than the previous version. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ftrace.c | 108 +++++++++++++++++++++++--------------------------- 1 file changed, 50 insertions(+), 58 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 5cbddb59e99f..fdaab04a0282 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -327,96 +327,89 @@ ftrace_record_ip(unsigned long ip) static int __ftrace_replace_code(struct dyn_ftrace *rec, - unsigned char *old, unsigned char *new, int enable) + unsigned char *nop, int enable) { unsigned long ip, fl; + unsigned char *call, *old, *new; ip = rec->ip; - if (ftrace_filtered && enable) { + /* + * If this record is not to be traced and + * it is not enabled then do nothing. + * + * If this record is not to be traced and + * it is enabled then disabled it. + * + */ + if (rec->flags & FTRACE_FL_NOTRACE) { + if (rec->flags & FTRACE_FL_ENABLED) + rec->flags &= ~FTRACE_FL_ENABLED; + else + return 0; + + } else if (ftrace_filtered && enable) { /* - * If filtering is on: - * - * If this record is set to be filtered and - * is enabled then do nothing. - * - * If this record is set to be filtered and - * it is not enabled, enable it. - * - * If this record is not set to be filtered - * and it is not enabled do nothing. - * - * If this record is set not to trace then - * do nothing. - * - * If this record is set not to trace and - * it is enabled then disable it. - * - * If this record is not set to be filtered and - * it is enabled, disable it. + * Filtering is on: */ - fl = rec->flags & (FTRACE_FL_FILTER | FTRACE_FL_NOTRACE | - FTRACE_FL_ENABLED); + fl = rec->flags & (FTRACE_FL_FILTER | FTRACE_FL_ENABLED); - if ((fl == (FTRACE_FL_FILTER | FTRACE_FL_ENABLED)) || - (fl == (FTRACE_FL_FILTER | FTRACE_FL_NOTRACE)) || - !fl || (fl == FTRACE_FL_NOTRACE)) + /* Record is filtered and enabled, do nothing */ + if (fl == (FTRACE_FL_FILTER | FTRACE_FL_ENABLED)) return 0; - /* - * If it is enabled disable it, - * otherwise enable it! - */ - if (fl & FTRACE_FL_ENABLED) { - /* swap new and old */ - new = old; - old = ftrace_call_replace(ip, FTRACE_ADDR); + /* Record is not filtered and is not enabled do nothing */ + if (!fl) + return 0; + + /* Record is not filtered but enabled, disable it */ + if (fl == FTRACE_FL_ENABLED) rec->flags &= ~FTRACE_FL_ENABLED; - } else { - new = ftrace_call_replace(ip, FTRACE_ADDR); + else + /* Otherwise record is filtered but not enabled, enable it */ rec->flags |= FTRACE_FL_ENABLED; - } } else { + /* Disable or not filtered */ if (enable) { - /* - * If this record is set not to trace and is - * not enabled, do nothing. - */ - fl = rec->flags & (FTRACE_FL_NOTRACE | FTRACE_FL_ENABLED); - if (fl == FTRACE_FL_NOTRACE) - return 0; - - new = ftrace_call_replace(ip, FTRACE_ADDR); - } else - old = ftrace_call_replace(ip, FTRACE_ADDR); - - if (enable) { + /* if record is enabled, do nothing */ if (rec->flags & FTRACE_FL_ENABLED) return 0; + rec->flags |= FTRACE_FL_ENABLED; + } else { + + /* if record is not enabled do nothing */ if (!(rec->flags & FTRACE_FL_ENABLED)) return 0; + rec->flags &= ~FTRACE_FL_ENABLED; } } + call = ftrace_call_replace(ip, FTRACE_ADDR); + + if (rec->flags & FTRACE_FL_ENABLED) { + old = nop; + new = call; + } else { + old = call; + new = nop; + } + return ftrace_modify_code(ip, old, new); } static void ftrace_replace_code(int enable) { int i, failed; - unsigned char *new = NULL, *old = NULL; + unsigned char *nop = NULL; struct dyn_ftrace *rec; struct ftrace_page *pg; - if (enable) - old = ftrace_nop_replace(); - else - new = ftrace_nop_replace(); + nop = ftrace_nop_replace(); for (pg = ftrace_pages_start; pg; pg = pg->next) { for (i = 0; i < pg->index; i++) { @@ -434,7 +427,7 @@ static void ftrace_replace_code(int enable) unfreeze_record(rec); } - failed = __ftrace_replace_code(rec, old, new, enable); + failed = __ftrace_replace_code(rec, nop, enable); if (failed && (rec->flags & FTRACE_FL_CONVERTED)) { rec->flags |= FTRACE_FL_FAILED; if ((system_state == SYSTEM_BOOTING) || @@ -538,8 +531,7 @@ static void ftrace_startup(void) mutex_lock(&ftrace_start_lock); ftrace_start++; - if (ftrace_start == 1) - command |= FTRACE_ENABLE_CALLS; + command |= FTRACE_ENABLE_CALLS; if (saved_ftrace_func != ftrace_trace_function) { saved_ftrace_func = ftrace_trace_function; -- cgit v1.2.3 From b4e0f9eb8aeceb22c48fee005378bd19e25216fc Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 19 Nov 2008 13:53:42 +0900 Subject: intel-iommu: fix compile warnings Impact: cleanup I got the following warnings on IA64: linux-2.6/drivers/pci/intel-iommu.c: In function 'init_dmars': linux-2.6/drivers/pci/intel-iommu.c:1658: warning: format '%Lx' expects type 'long long unsigned int', but argument 2 has type 'u64' linux-2.6/drivers/pci/intel-iommu.c:1663: warning: format '%Lx' expects type 'long long unsigned int', but argument 2 has type 'u64' Another victim of int-ll64.h versus int-l64.h confusion between platforms. ->reg_base_addr has a type of u64 - which can only be printed out consistently if we cast its type up to LL. [ Eventually reg_base_addr should be converted to phys_addr_t, for which we have the %pR printk helper - but that is out of the scope of late -rc's. ] Signed-off-by: FUJITA Tomonori Signed-off-by: Ingo Molnar --- drivers/pci/intel-iommu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index a2692724b68f..5c8baa43ac9c 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1655,12 +1655,14 @@ int __init init_dmars(void) iommu->flush.flush_context = __iommu_flush_context; iommu->flush.flush_iotlb = __iommu_flush_iotlb; printk(KERN_INFO "IOMMU 0x%Lx: using Register based " - "invalidation\n", drhd->reg_base_addr); + "invalidation\n", + (unsigned long long)drhd->reg_base_addr); } else { iommu->flush.flush_context = qi_flush_context; iommu->flush.flush_iotlb = qi_flush_iotlb; printk(KERN_INFO "IOMMU 0x%Lx: using Queued " - "invalidation\n", drhd->reg_base_addr); + "invalidation\n", + (unsigned long long)drhd->reg_base_addr); } } -- cgit v1.2.3 From f464ff581c247d82fcc0e7ef40c1ca6df9739068 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Wed, 19 Nov 2008 10:40:55 -0800 Subject: powerpc/85xx: L2 cache size wrong in 8572DS dts It's 1MB, not 512KB. Newer U-Boots will fix this entry, but that's no reason to have the wrong value in the dts. Signed-off-by: Trent Piepho Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8572ds.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index cadd4652a695..5c69b2fafd32 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -90,7 +90,7 @@ compatible = "fsl,mpc8572-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K + cache-size = <0x100000>; // L2, 1M interrupt-parent = <&mpic>; interrupts = <16 2>; }; -- cgit v1.2.3 From 06597aa90a75621639dcaaf5fc07bcb01f752d45 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Tue, 18 Nov 2008 10:55:45 +0000 Subject: powerpc: Use generic PHY driver for Marvell 88E1111 PHY on GE Fanuc SBC610 The Marvell PHY driver is currently being used for the 88E1111 on the SBC610. This driver is causing the link to run in 10/Half mode, the generic PHY driver is correctly configuring the PHY as 1000/Full. Edit default config to use generic PHY driver. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/configs/86xx/gef_sbc610_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 2da13e00a807..07ccaf89f379 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -838,7 +838,7 @@ CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=y +# CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set -- cgit v1.2.3 From e871809cccc11aaa072afaf746f8fd946d2d9cac Mon Sep 17 00:00:00 2001 From: Michael Barkowski Date: Thu, 13 Nov 2008 10:18:28 -0500 Subject: powerpc/mpc832x_rdb: fix swapped ethernet ids ethernet0 (called FSL UEC0 in U-Boot) should be enet1 (UCC3/eth1), and ethernet1 should be enet0 (UCC2/eth0), to be consistent with U-Boot so that the interfaces do not swap addresses when control passes from U-Boot to the kernel. Signed-off-by: Michael Barkowski Acked-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc832x_rdb.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 226ff066652b..dea30910c136 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -18,8 +18,8 @@ #size-cells = <1>; aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; + ethernet0 = &enet1; + ethernet1 = &enet0; serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; -- cgit v1.2.3 From 5f4ba04ffd8fc9f6b15b92270ef0517ae52dcf3a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 14 Nov 2008 13:32:42 -0500 Subject: Input: i8042 - add Compal Hel80 laptop to nomux blacklist Reported-by: Jaime Cura Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 5db1d0b7456e..29e686388a2c 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -344,6 +344,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"), }, }, + { + .ident = "Compal HEL80I", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"), + DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"), + }, + }, { } }; -- cgit v1.2.3 From c3e388964baa00d8c3960f23e8c8a1fb3966759e Mon Sep 17 00:00:00 2001 From: Benjamin Thery Date: Wed, 19 Nov 2008 14:07:41 -0800 Subject: net: fix ip_mr_init() error path Similarly to IPv6 ip6_mr_init() (fixed last week), the order of cleanup operations in the error/exit section of ip_mr_init() is completely inversed. It should be the other way around. Also a del_timer() is missing in the error path. I should have guessed last week that this same error existed in ipmr.c too, as ip6mr.c is largely inspired by ipmr.c. Signed-off-by: Benjamin Thery Signed-off-by: David S. Miller --- net/ipv4/ipmr.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index b42e082cc170..25924b1eb2ef 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -1945,13 +1945,14 @@ int __init ip_mr_init(void) goto proc_cache_fail; #endif return 0; -reg_notif_fail: - kmem_cache_destroy(mrt_cachep); #ifdef CONFIG_PROC_FS -proc_vif_fail: - unregister_netdevice_notifier(&ip_mr_notifier); proc_cache_fail: proc_net_remove(&init_net, "ip_mr_vif"); +proc_vif_fail: + unregister_netdevice_notifier(&ip_mr_notifier); #endif +reg_notif_fail: + del_timer(&ipmr_expire_timer); + kmem_cache_destroy(mrt_cachep); return err; } -- cgit v1.2.3 From bfdbc0acadcc761b94814d78f0acec90f0d760de Mon Sep 17 00:00:00 2001 From: Robert Olsson Date: Wed, 19 Nov 2008 14:09:47 -0800 Subject: pktgen: fix multiple queue warning As number of TX queues in unrelated to number of CPU's we remove this test and just make sure nxtq never gets exceeded. Signed-off-by: Robert Olsson Signed-off-by: David S. Miller --- net/core/pktgen.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index a47f5bad110d..8997e912aaaf 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -1973,13 +1973,7 @@ static void pktgen_setup_inject(struct pktgen_dev *pkt_dev) /* make sure that we don't pick a non-existing transmit queue */ ntxq = pkt_dev->odev->real_num_tx_queues; - if (ntxq > num_online_cpus() && (pkt_dev->flags & F_QUEUE_MAP_CPU)) { - printk(KERN_WARNING "pktgen: WARNING: QUEUE_MAP_CPU " - "disabled because CPU count (%d) exceeds number " - "of tx queues (%d) on %s\n", num_online_cpus(), ntxq, - pkt_dev->odev->name); - pkt_dev->flags &= ~F_QUEUE_MAP_CPU; - } + if (ntxq <= pkt_dev->queue_map_min) { printk(KERN_WARNING "pktgen: WARNING: Requested " "queue_map_min (zero-based) (%d) exceeds valid range " @@ -2202,6 +2196,7 @@ static void set_cur_queue_map(struct pktgen_dev *pkt_dev) } pkt_dev->cur_queue_map = t; } + pkt_dev->cur_queue_map = pkt_dev->cur_queue_map % pkt_dev->odev->real_num_tx_queues; } /* Increment/randomize headers according to flags and current values -- cgit v1.2.3 From 1df8fb3d5f078f9cab901b6106ef2c9b74eef7df Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Tue, 11 Nov 2008 17:17:45 +0800 Subject: PCI: Fix disable IRQ 0 in pci_reset_function() Before initialization, dev->irq may be zero. Make sure we don't disable it at reset time in that case. Reviewed-by: Matthew Wilcox Signed-off-by: Sheng Yang Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 21f2ac639cab..28af496b441e 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1832,7 +1832,7 @@ int pci_reset_function(struct pci_dev *dev) if (!(cap & PCI_EXP_DEVCAP_FLR)) return -ENOTTY; - if (!dev->msi_enabled && !dev->msix_enabled) + if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0) disable_irq(dev->irq); pci_save_state(dev); @@ -1841,7 +1841,7 @@ int pci_reset_function(struct pci_dev *dev) r = pci_execute_reset_function(dev); pci_restore_state(dev); - if (!dev->msi_enabled && !dev->msix_enabled) + if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0) enable_irq(dev->irq); return r; -- cgit v1.2.3 From 79aefa45b20940cbb9104464548ff74f80f2395e Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 19 Nov 2008 14:17:02 -0800 Subject: ixgbe: fix compilation with gcc-3.4 CC [M] drivers/net/ixgbe/ixgbe_main.o drivers/net/ixgbe/ixgbe_main.c: In function `ixgbe_intr': drivers/net/ixgbe/ixgbe_main.c:1290: sorry, unimplemented: inlining failed in call to 'ixgbe_irq_enable': function body not available drivers/net/ixgbe/ixgbe_main.c:1312: sorry, unimplemented: called from here make[4]: *** [drivers/net/ixgbe/ixgbe_main.o] Error 1 Signed-off-by: Alexey Dobriyan Acked-by: Peter P Waskiewicz Jr Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 58 ++++++++++++++++++++---------------------- 1 file changed, 28 insertions(+), 30 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 7548fb7360d9..36f2bb666bf7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1287,7 +1287,34 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter) return; } -static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter); +/** + * ixgbe_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + **/ +static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) +{ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); + IXGBE_WRITE_FLUSH(&adapter->hw); + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + int i; + for (i = 0; i < adapter->num_msix_vectors; i++) + synchronize_irq(adapter->msix_entries[i].vector); + } else { + synchronize_irq(adapter->pdev->irq); + } +} + +/** + * ixgbe_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + **/ +static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) +{ + u32 mask; + mask = IXGBE_EIMS_ENABLE_MASK; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); + IXGBE_WRITE_FLUSH(&adapter->hw); +} /** * ixgbe_intr - legacy mode Interrupt Handler @@ -1393,35 +1420,6 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter) } } -/** - * ixgbe_irq_disable - Mask off interrupt generation on the NIC - * @adapter: board private structure - **/ -static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) -{ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); - IXGBE_WRITE_FLUSH(&adapter->hw); - if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { - int i; - for (i = 0; i < adapter->num_msix_vectors; i++) - synchronize_irq(adapter->msix_entries[i].vector); - } else { - synchronize_irq(adapter->pdev->irq); - } -} - -/** - * ixgbe_irq_enable - Enable default interrupt generation settings - * @adapter: board private structure - **/ -static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) -{ - u32 mask; - mask = IXGBE_EIMS_ENABLE_MASK; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); - IXGBE_WRITE_FLUSH(&adapter->hw); -} - /** * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts * -- cgit v1.2.3 From 566521d63720ab47576afb85147e5652993bf1e6 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 19 Nov 2008 14:17:41 -0800 Subject: phonet: fix compilation with gcc-3.4 CC [M] net/phonet/af_phonet.o net/phonet/af_phonet.c: In function `pn_socket_create': net/phonet/af_phonet.c:38: sorry, unimplemented: inlining failed in call to 'phonet_proto_put': function body not available net/phonet/af_phonet.c:99: sorry, unimplemented: called from here make[3]: *** [net/phonet/af_phonet.o] Error 1 Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/phonet/af_phonet.c | 52 +++++++++++++++++++++++--------------------------- 1 file changed, 24 insertions(+), 28 deletions(-) diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c index 7ab30f668b5a..9d211f12582b 100644 --- a/net/phonet/af_phonet.c +++ b/net/phonet/af_phonet.c @@ -33,9 +33,30 @@ #include #include -static struct net_proto_family phonet_proto_family; -static struct phonet_protocol *phonet_proto_get(int protocol); -static inline void phonet_proto_put(struct phonet_protocol *pp); +/* Transport protocol registration */ +static struct phonet_protocol *proto_tab[PHONET_NPROTO] __read_mostly; +static DEFINE_SPINLOCK(proto_tab_lock); + +static struct phonet_protocol *phonet_proto_get(int protocol) +{ + struct phonet_protocol *pp; + + if (protocol >= PHONET_NPROTO) + return NULL; + + spin_lock(&proto_tab_lock); + pp = proto_tab[protocol]; + if (pp && !try_module_get(pp->prot->owner)) + pp = NULL; + spin_unlock(&proto_tab_lock); + + return pp; +} + +static inline void phonet_proto_put(struct phonet_protocol *pp) +{ + module_put(pp->prot->owner); +} /* protocol family functions */ @@ -375,10 +396,6 @@ static struct packet_type phonet_packet_type = { .func = phonet_rcv, }; -/* Transport protocol registration */ -static struct phonet_protocol *proto_tab[PHONET_NPROTO] __read_mostly; -static DEFINE_SPINLOCK(proto_tab_lock); - int __init_or_module phonet_proto_register(int protocol, struct phonet_protocol *pp) { @@ -412,27 +429,6 @@ void phonet_proto_unregister(int protocol, struct phonet_protocol *pp) } EXPORT_SYMBOL(phonet_proto_unregister); -static struct phonet_protocol *phonet_proto_get(int protocol) -{ - struct phonet_protocol *pp; - - if (protocol >= PHONET_NPROTO) - return NULL; - - spin_lock(&proto_tab_lock); - pp = proto_tab[protocol]; - if (pp && !try_module_get(pp->prot->owner)) - pp = NULL; - spin_unlock(&proto_tab_lock); - - return pp; -} - -static inline void phonet_proto_put(struct phonet_protocol *pp) -{ - module_put(pp->prot->owner); -} - /* Module registration */ static int __init phonet_init(void) { -- cgit v1.2.3 From b47300168e770b60ab96c8924854c3b0eb4260eb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 19 Nov 2008 15:33:54 -0800 Subject: net: Do not fire linkwatch events until the device is registered. Several device drivers try to do things like netif_carrier_off() before register_netdev() is invoked. This is bogus, but too many drivers do this to fix them all up in one go. Reported-by: Folkert van Heusden Signed-off-by: David S. Miller --- net/sched/sch_generic.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 93cd30ce6501..cdcd16fcfeda 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -270,6 +270,8 @@ static void dev_watchdog_down(struct net_device *dev) void netif_carrier_on(struct net_device *dev) { if (test_and_clear_bit(__LINK_STATE_NOCARRIER, &dev->state)) { + if (dev->reg_state == NETREG_UNINITIALIZED) + return; linkwatch_fire_event(dev); if (netif_running(dev)) __netdev_watchdog_up(dev); @@ -285,8 +287,11 @@ EXPORT_SYMBOL(netif_carrier_on); */ void netif_carrier_off(struct net_device *dev) { - if (!test_and_set_bit(__LINK_STATE_NOCARRIER, &dev->state)) + if (!test_and_set_bit(__LINK_STATE_NOCARRIER, &dev->state)) { + if (dev->reg_state == NETREG_UNINITIALIZED) + return; linkwatch_fire_event(dev); + } } EXPORT_SYMBOL(netif_carrier_off); -- cgit v1.2.3 From 9d6ada9f4141fb8ab3c5d7dffe382f6a68b8e961 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Wed, 19 Nov 2008 15:38:24 -0800 Subject: phylib: fix phy name example in documentation All MDIO bus drivers currently name bus with "%x" format. There is one exception where mv643xx_eth driver is using "%d". Phy address on the bus uses format "%02x". Fixing phy name example to match all real life MDIO drivers. Signed-off-by: Paulius Zaleckas Signed-off-by: David S. Miller --- Documentation/networking/phy.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt index 8df6a7b0e66c..88bb71b46da4 100644 --- a/Documentation/networking/phy.txt +++ b/Documentation/networking/phy.txt @@ -96,7 +96,7 @@ Letting the PHY Abstraction Layer do Everything static void adjust_link(struct net_device *dev); Next, you need to know the device name of the PHY connected to this device. - The name will look something like, "phy0:0", where the first number is the + The name will look something like, "0:00", where the first number is the bus id, and the second is the PHY's address on that bus. Typically, the bus is responsible for making its ID unique. -- cgit v1.2.3 From 31c221c49f92d17632e0d662eb62a27e8b425805 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 19 Nov 2008 15:50:59 -0800 Subject: net: jme.c rxdesc.flags is __le16, other missing endian swaps This is the minimal patch to fix endian mismatches. These are probably bugs on big-endian arches, noops on little endian. jme_rxsum_ok could be improved to directly take a __le16 and change all of the masks/sets to be in little-endian, but has not been done here to keep the patch small. Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- drivers/net/jme.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/net/jme.c b/drivers/net/jme.c index 81c6cdc3851f..665e70d620fc 100644 --- a/drivers/net/jme.c +++ b/drivers/net/jme.c @@ -912,23 +912,23 @@ jme_alloc_and_feed_skb(struct jme_adapter *jme, int idx) skb_put(skb, framesize); skb->protocol = eth_type_trans(skb, jme->dev); - if (jme_rxsum_ok(jme, rxdesc->descwb.flags)) + if (jme_rxsum_ok(jme, le16_to_cpu(rxdesc->descwb.flags))) skb->ip_summed = CHECKSUM_UNNECESSARY; else skb->ip_summed = CHECKSUM_NONE; - if (rxdesc->descwb.flags & RXWBFLAG_TAGON) { + if (rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_TAGON)) { if (jme->vlgrp) { jme->jme_vlan_rx(skb, jme->vlgrp, - le32_to_cpu(rxdesc->descwb.vlan)); + le16_to_cpu(rxdesc->descwb.vlan)); NET_STAT(jme).rx_bytes += 4; } } else { jme->jme_rx(skb); } - if ((le16_to_cpu(rxdesc->descwb.flags) & RXWBFLAG_DEST) == - RXWBFLAG_DEST_MUL) + if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_DEST)) == + cpu_to_le16(RXWBFLAG_DEST_MUL)) ++(NET_STAT(jme).multicast); jme->dev->last_rx = jiffies; @@ -961,7 +961,7 @@ jme_process_receive(struct jme_adapter *jme, int limit) rxdesc = rxring->desc; rxdesc += i; - if ((rxdesc->descwb.flags & RXWBFLAG_OWN) || + if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) || !(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL)) goto out; @@ -1763,10 +1763,9 @@ jme_expand_header(struct jme_adapter *jme, struct sk_buff *skb) } static int -jme_tx_tso(struct sk_buff *skb, - u16 *mss, u8 *flags) +jme_tx_tso(struct sk_buff *skb, __le16 *mss, u8 *flags) { - *mss = skb_shinfo(skb)->gso_size << TXDESC_MSS_SHIFT; + *mss = cpu_to_le16(skb_shinfo(skb)->gso_size << TXDESC_MSS_SHIFT); if (*mss) { *flags |= TXFLAG_LSEN; @@ -1826,11 +1825,11 @@ jme_tx_csum(struct jme_adapter *jme, struct sk_buff *skb, u8 *flags) } static inline void -jme_tx_vlan(struct sk_buff *skb, u16 *vlan, u8 *flags) +jme_tx_vlan(struct sk_buff *skb, __le16 *vlan, u8 *flags) { if (vlan_tx_tag_present(skb)) { *flags |= TXFLAG_TAGON; - *vlan = vlan_tx_tag_get(skb); + *vlan = cpu_to_le16(vlan_tx_tag_get(skb)); } } -- cgit v1.2.3 From de339c2aa7fea18410b1abeab5674bfbd4073a63 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Wed, 19 Nov 2008 15:52:41 -0800 Subject: phylib: Fix auto-negotiation restart avoidance A previous patch, 51e2a3846eab18711f4eb59cd0a4c33054e2980a, made genphy_config_aneg() not restart aneg by calling genphy_restart_aneg() if the advertisement hadn't changed. But, genphy_restart_aneg() doesn't just restart aneg, it may also *enable* aneg or un-isolate the PHY from the MII (those functions are controlled by the same register). The code to avoid calling genphy_restart_aneg() didn't consider this. So, modify genphy_config_aneg() to also check if the PHY needs to have aneg enabled or be un-isolated before deciding not to restart aneg. This caused a problem with certain Davicom PHYs, as that driver isolates the PHY (why?) before calling genphy_config_aneg() and expects the PHY to be un-isolated by that function. Signed-off-by: Trent Piepho Reported-by: Scott Wood Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8fb1faca883a..55bc24b234e3 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -564,20 +564,32 @@ EXPORT_SYMBOL(genphy_restart_aneg); */ int genphy_config_aneg(struct phy_device *phydev) { - int result = 0; + int result; - if (AUTONEG_ENABLE == phydev->autoneg) { - int result = genphy_config_advert(phydev); + if (AUTONEG_ENABLE != phydev->autoneg) + return genphy_setup_forced(phydev); + + result = genphy_config_advert(phydev); + + if (result < 0) /* error */ + return result; - if (result < 0) /* error */ - return result; + if (result == 0) { + /* Advertisment hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? */ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + result = 1; /* do restart aneg */ + } - /* Only restart aneg if we are advertising something different - * than we were before. */ - if (result > 0) - result = genphy_restart_aneg(phydev); - } else - result = genphy_setup_forced(phydev); + /* Only restart aneg if we are advertising something different + * than we were before. */ + if (result > 0) + result = genphy_restart_aneg(phydev); return result; } -- cgit v1.2.3 From b88ed5cc884e4c28d787cf0912b8635376f16a87 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 19 Nov 2008 15:54:38 -0800 Subject: net: ipg.c fix bracing on endian swapping rxfd->frag_info is a __le64, IPG_RFI_FRAGLEN is a cpu-endian constant and wants to be outside of the le64_to_cpu. Fixed in multiple places. Also an occurrence where le64_to_cpu was used instead of cpu_to_le64 Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- drivers/net/ipg.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index 7373dafbb3f7..059369885be1 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -1112,7 +1112,7 @@ static void ipg_nic_rx_free_skb(struct net_device *dev) struct ipg_rx *rxfd = sp->rxd + entry; pci_unmap_single(sp->pdev, - le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN), + le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN, sp->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb_irq(sp->rx_buff[entry]); sp->rx_buff[entry] = NULL; @@ -1179,7 +1179,7 @@ static int ipg_nic_rx_check_error(struct net_device *dev) */ if (sp->rx_buff[entry]) { pci_unmap_single(sp->pdev, - le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN), + le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN, sp->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb_irq(sp->rx_buff[entry]); @@ -1246,7 +1246,7 @@ static void ipg_nic_rx_with_start(struct net_device *dev, if (jumbo->found_start) dev_kfree_skb_irq(jumbo->skb); - pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN), + pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN, sp->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put(skb, sp->rxfrag_size); @@ -1349,7 +1349,7 @@ static int ipg_nic_rx_jumbo(struct net_device *dev) unsigned int entry = curr % IPG_RFDLIST_LENGTH; struct ipg_rx *rxfd = sp->rxd + entry; - if (!(rxfd->rfs & le64_to_cpu(IPG_RFS_RFDDONE))) + if (!(rxfd->rfs & cpu_to_le64(IPG_RFS_RFDDONE))) break; switch (ipg_nic_rx_check_frame_type(dev)) { -- cgit v1.2.3 From 9ca791bbd464d7968db1530b433cc397a4c348c1 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 19 Nov 2008 15:36:06 -0800 Subject: hwmon: applesmc: Add support for iMac 6 Add temperature sensor support for iMac 6. Signed-off-by: Henrik Rydberg Tested-by: Caleb Hyde Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 488e45cd43d7..10977b3d201c 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -128,6 +128,9 @@ static const char* temperature_sensors_sets[][36] = { /* Set 13: iMac 8,1 */ { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P", "TL0P", "TO0P", "TW0P", "Tm0P", "Tp0P", NULL }, +/* Set 14: iMac 6,1 */ + { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P", + "TO0P", "Tp0P", NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1296,6 +1299,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 1, .light = 1, .temperature_set = 12 }, /* iMac 8: light sensor only, temperature set 13 */ { .accelerometer = 0, .light = 0, .temperature_set = 13 }, +/* iMac 6: light sensor only, temperature set 14 */ + { .accelerometer = 0, .light = 0, .temperature_set = 14 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1353,6 +1358,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") }, &applesmc_dmi_data[13]}, + { applesmc_dmi_match, "Apple iMac 6", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "iMac6") }, + &applesmc_dmi_data[14]}, { applesmc_dmi_match, "Apple iMac 5", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") }, -- cgit v1.2.3 From cf7b9a1e11993a064f445d332fecf22819b87a5e Mon Sep 17 00:00:00 2001 From: Julien Brunel Date: Wed, 19 Nov 2008 15:36:07 -0800 Subject: drivers/video: bad error test before a dereference The error test that follows the call to backlight_device_register semms not to concern the right variable. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @def0@ expression x; position p0; @@ x@p0 = backlight_device_register(...) @protected@ expression def0.x,E; position def0.p0; position p; statement S; @@ x@p0 ... when != x = E if (!IS_ERR(x) && ...) {<... x@p ...>} else S @unprotected@ expression def0.x; identifier fld; position def0.p0; position p != protected.p; @@ x@p0 ... when != x = E * x@p->fld // Signed-off-by: Julien Brunel Signed-off-by: Julia Lawall Acked-by: Nicolas Ferre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index f8d0a57a07cb..9a577a800db5 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -132,7 +132,7 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo) bl = backlight_device_register("backlight", &sinfo->pdev->dev, sinfo, &atmel_lcdc_bl_ops); - if (IS_ERR(sinfo->backlight)) { + if (IS_ERR(bl)) { dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n", PTR_ERR(bl)); return; -- cgit v1.2.3 From e00b4ff7ebf098b11b11be403921c1cf41d9e321 Mon Sep 17 00:00:00 2001 From: Nadia Derbey Date: Wed, 19 Nov 2008 15:36:08 -0800 Subject: sysvipc: fix the ipc structures initialization A problem was found while reviewing the code after Bugzilla bug http://bugzilla.kernel.org/show_bug.cgi?id=11796. In ipc_addid(), the newly allocated ipc structure is inserted into the ipcs tree (i.e made visible to readers) without locking it. This is not correct since its initialization continues after it has been inserted in the tree. This patch moves the ipc structure lock initialization + locking before the actual insertion. Signed-off-by: Nadia Derbey Reported-by: Clement Calmels Cc: Manfred Spraul Cc: [2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/util.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/ipc/util.c b/ipc/util.c index 49b3ea615dc5..361fd1c96fcf 100644 --- a/ipc/util.c +++ b/ipc/util.c @@ -266,9 +266,17 @@ int ipc_addid(struct ipc_ids* ids, struct kern_ipc_perm* new, int size) if (ids->in_use >= size) return -ENOSPC; + spin_lock_init(&new->lock); + new->deleted = 0; + rcu_read_lock(); + spin_lock(&new->lock); + err = idr_get_new(&ids->ipcs_idr, new, &id); - if (err) + if (err) { + spin_unlock(&new->lock); + rcu_read_unlock(); return err; + } ids->in_use++; @@ -280,10 +288,6 @@ int ipc_addid(struct ipc_ids* ids, struct kern_ipc_perm* new, int size) ids->seq = 0; new->id = ipc_buildid(id, new->seq); - spin_lock_init(&new->lock); - new->deleted = 0; - rcu_read_lock(); - spin_lock(&new->lock); return id; } -- cgit v1.2.3 From cf7ee554f3a324e98181b0ea249d9d5be3a0acb8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 19 Nov 2008 15:36:10 -0800 Subject: fbdev: clean the penguin's dirty feet When booting in a direct color mode, the penguin has dirty feet, i.e., some pixels have the wrong color. This is caused by fb_set_logo_directpalette() which does not initialize the last 32 palette entries. Signed-off-by: Clemens Ladisch Acked-by: Geert Uytterhoeven Cc: Krzysztof Helt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/fbmem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 1d5ae39cb271..3c65b0d67617 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -230,7 +230,7 @@ static void fb_set_logo_directpalette(struct fb_info *info, greenshift = info->var.green.offset; blueshift = info->var.blue.offset; - for (i = 32; i < logo->clutsize; i++) + for (i = 32; i < 32 + logo->clutsize; i++) palette[i] = i << redshift | i << greenshift | i << blueshift; } -- cgit v1.2.3 From de11defebf00007677fb7ee91d9b089b78786fbb Mon Sep 17 00:00:00 2001 From: Ulrich Drepper Date: Wed, 19 Nov 2008 15:36:14 -0800 Subject: reintroduce accept4 Introduce a new accept4() system call. The addition of this system call matches analogous changes in 2.6.27 (dup3(), evenfd2(), signalfd4(), inotify_init1(), epoll_create1(), pipe2()) which added new system calls that differed from analogous traditional system calls in adding a flags argument that can be used to access additional functionality. The accept4() system call is exactly the same as accept(), except that it adds a flags bit-mask argument. Two flags are initially implemented. (Most of the new system calls in 2.6.27 also had both of these flags.) SOCK_CLOEXEC causes the close-on-exec (FD_CLOEXEC) flag to be enabled for the new file descriptor returned by accept4(). This is a useful security feature to avoid leaking information in a multithreaded program where one thread is doing an accept() at the same time as another thread is doing a fork() plus exec(). More details here: http://udrepper.livejournal.com/20407.html "Secure File Descriptor Handling", Ulrich Drepper). The other flag is SOCK_NONBLOCK, which causes the O_NONBLOCK flag to be enabled on the new open file description created by accept4(). (This flag is merely a convenience, saving the use of additional calls fcntl(F_GETFL) and fcntl (F_SETFL) to achieve the same result. Here's a test program. Works on x86-32. Should work on x86-64, but I (mtk) don't have a system to hand to test with. It tests accept4() with each of the four possible combinations of SOCK_CLOEXEC and SOCK_NONBLOCK set/clear in 'flags', and verifies that the appropriate flags are set on the file descriptor/open file description returned by accept4(). I tested Ulrich's patch in this thread by applying against 2.6.28-rc2, and it passes according to my test program. /* test_accept4.c Copyright (C) 2008, Linux Foundation, written by Michael Kerrisk Licensed under the GNU GPLv2 or later. */ #define _GNU_SOURCE #include #include #include #include #include #include #include #include #define PORT_NUM 33333 #define die(msg) do { perror(msg); exit(EXIT_FAILURE); } while (0) /**********************************************************************/ /* The following is what we need until glibc gets a wrapper for accept4() */ /* Flags for socket(), socketpair(), accept4() */ #ifndef SOCK_CLOEXEC #define SOCK_CLOEXEC O_CLOEXEC #endif #ifndef SOCK_NONBLOCK #define SOCK_NONBLOCK O_NONBLOCK #endif #ifdef __x86_64__ #define SYS_accept4 288 #elif __i386__ #define USE_SOCKETCALL 1 #define SYS_ACCEPT4 18 #else #error "Sorry -- don't know the syscall # on this architecture" #endif static int accept4(int fd, struct sockaddr *sockaddr, socklen_t *addrlen, int flags) { printf("Calling accept4(): flags = %x", flags); if (flags != 0) { printf(" ("); if (flags & SOCK_CLOEXEC) printf("SOCK_CLOEXEC"); if ((flags & SOCK_CLOEXEC) && (flags & SOCK_NONBLOCK)) printf(" "); if (flags & SOCK_NONBLOCK) printf("SOCK_NONBLOCK"); printf(")"); } printf("\n"); #if USE_SOCKETCALL long args[6]; args[0] = fd; args[1] = (long) sockaddr; args[2] = (long) addrlen; args[3] = flags; return syscall(SYS_socketcall, SYS_ACCEPT4, args); #else return syscall(SYS_accept4, fd, sockaddr, addrlen, flags); #endif } /**********************************************************************/ static int do_test(int lfd, struct sockaddr_in *conn_addr, int closeonexec_flag, int nonblock_flag) { int connfd, acceptfd; int fdf, flf, fdf_pass, flf_pass; struct sockaddr_in claddr; socklen_t addrlen; printf("=======================================\n"); connfd = socket(AF_INET, SOCK_STREAM, 0); if (connfd == -1) die("socket"); if (connect(connfd, (struct sockaddr *) conn_addr, sizeof(struct sockaddr_in)) == -1) die("connect"); addrlen = sizeof(struct sockaddr_in); acceptfd = accept4(lfd, (struct sockaddr *) &claddr, &addrlen, closeonexec_flag | nonblock_flag); if (acceptfd == -1) { perror("accept4()"); close(connfd); return 0; } fdf = fcntl(acceptfd, F_GETFD); if (fdf == -1) die("fcntl:F_GETFD"); fdf_pass = ((fdf & FD_CLOEXEC) != 0) == ((closeonexec_flag & SOCK_CLOEXEC) != 0); printf("Close-on-exec flag is %sset (%s); ", (fdf & FD_CLOEXEC) ? "" : "not ", fdf_pass ? "OK" : "failed"); flf = fcntl(acceptfd, F_GETFL); if (flf == -1) die("fcntl:F_GETFD"); flf_pass = ((flf & O_NONBLOCK) != 0) == ((nonblock_flag & SOCK_NONBLOCK) !=0); printf("nonblock flag is %sset (%s)\n", (flf & O_NONBLOCK) ? "" : "not ", flf_pass ? "OK" : "failed"); close(acceptfd); close(connfd); printf("Test result: %s\n", (fdf_pass && flf_pass) ? "PASS" : "FAIL"); return fdf_pass && flf_pass; } static int create_listening_socket(int port_num) { struct sockaddr_in svaddr; int lfd; int optval; memset(&svaddr, 0, sizeof(struct sockaddr_in)); svaddr.sin_family = AF_INET; svaddr.sin_addr.s_addr = htonl(INADDR_ANY); svaddr.sin_port = htons(port_num); lfd = socket(AF_INET, SOCK_STREAM, 0); if (lfd == -1) die("socket"); optval = 1; if (setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof(optval)) == -1) die("setsockopt"); if (bind(lfd, (struct sockaddr *) &svaddr, sizeof(struct sockaddr_in)) == -1) die("bind"); if (listen(lfd, 5) == -1) die("listen"); return lfd; } int main(int argc, char *argv[]) { struct sockaddr_in conn_addr; int lfd; int port_num; int passed; passed = 1; port_num = (argc > 1) ? atoi(argv[1]) : PORT_NUM; memset(&conn_addr, 0, sizeof(struct sockaddr_in)); conn_addr.sin_family = AF_INET; conn_addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); conn_addr.sin_port = htons(port_num); lfd = create_listening_socket(port_num); if (!do_test(lfd, &conn_addr, 0, 0)) passed = 0; if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, 0)) passed = 0; if (!do_test(lfd, &conn_addr, 0, SOCK_NONBLOCK)) passed = 0; if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, SOCK_NONBLOCK)) passed = 0; close(lfd); exit(passed ? EXIT_SUCCESS : EXIT_FAILURE); } [mtk.manpages@gmail.com: rewrote changelog, updated test program] Signed-off-by: Ulrich Drepper Tested-by: Michael Kerrisk Acked-by: Michael Kerrisk Cc: Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/include/asm/unistd_64.h | 4 +- include/linux/net.h | 6 +-- include/linux/syscalls.h | 3 +- kernel/sys_ni.c | 2 +- net/compat.c | 50 +++---------------------- net/socket.c | 80 +++++----------------------------------- 6 files changed, 21 insertions(+), 124 deletions(-) diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h index 834b2c1d89fb..d2e415e6666f 100644 --- a/arch/x86/include/asm/unistd_64.h +++ b/arch/x86/include/asm/unistd_64.h @@ -639,8 +639,8 @@ __SYSCALL(__NR_fallocate, sys_fallocate) __SYSCALL(__NR_timerfd_settime, sys_timerfd_settime) #define __NR_timerfd_gettime 287 __SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime) -#define __NR_paccept 288 -__SYSCALL(__NR_paccept, sys_paccept) +#define __NR_accept4 288 +__SYSCALL(__NR_accept4, sys_accept4) #define __NR_signalfd4 289 __SYSCALL(__NR_signalfd4, sys_signalfd4) #define __NR_eventfd2 290 diff --git a/include/linux/net.h b/include/linux/net.h index 6dc14a240042..4515efae4c39 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -40,7 +40,7 @@ #define SYS_GETSOCKOPT 15 /* sys_getsockopt(2) */ #define SYS_SENDMSG 16 /* sys_sendmsg(2) */ #define SYS_RECVMSG 17 /* sys_recvmsg(2) */ -#define SYS_PACCEPT 18 /* sys_paccept(2) */ +#define SYS_ACCEPT4 18 /* sys_accept4(2) */ typedef enum { SS_FREE = 0, /* not allocated */ @@ -100,7 +100,7 @@ enum sock_type { * remaining bits are used as flags. */ #define SOCK_TYPE_MASK 0xf -/* Flags for socket, socketpair, paccept */ +/* Flags for socket, socketpair, accept4 */ #define SOCK_CLOEXEC O_CLOEXEC #ifndef SOCK_NONBLOCK #define SOCK_NONBLOCK O_NONBLOCK @@ -223,8 +223,6 @@ extern int sock_map_fd(struct socket *sock, int flags); extern struct socket *sockfd_lookup(int fd, int *err); #define sockfd_put(sock) fput(sock->file) extern int net_ratelimit(void); -extern long do_accept(int fd, struct sockaddr __user *upeer_sockaddr, - int __user *upeer_addrlen, int flags); #define net_random() random32() #define net_srandom(seed) srandom32((__force u32)seed) diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index d6ff145919ca..04fb47bfb920 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -410,8 +410,7 @@ asmlinkage long sys_getsockopt(int fd, int level, int optname, asmlinkage long sys_bind(int, struct sockaddr __user *, int); asmlinkage long sys_connect(int, struct sockaddr __user *, int); asmlinkage long sys_accept(int, struct sockaddr __user *, int __user *); -asmlinkage long sys_paccept(int, struct sockaddr __user *, int __user *, - const __user sigset_t *, size_t, int); +asmlinkage long sys_accept4(int, struct sockaddr __user *, int __user *, int); asmlinkage long sys_getsockname(int, struct sockaddr __user *, int __user *); asmlinkage long sys_getpeername(int, struct sockaddr __user *, int __user *); asmlinkage long sys_send(int, void __user *, size_t, unsigned); diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c index a77b27b11b04..e14a23281707 100644 --- a/kernel/sys_ni.c +++ b/kernel/sys_ni.c @@ -31,7 +31,7 @@ cond_syscall(sys_socketpair); cond_syscall(sys_bind); cond_syscall(sys_listen); cond_syscall(sys_accept); -cond_syscall(sys_paccept); +cond_syscall(sys_accept4); cond_syscall(sys_connect); cond_syscall(sys_getsockname); cond_syscall(sys_getpeername); diff --git a/net/compat.c b/net/compat.c index 6ce1a1cadcc0..a3a2ba0fac08 100644 --- a/net/compat.c +++ b/net/compat.c @@ -725,7 +725,7 @@ EXPORT_SYMBOL(compat_mc_getsockopt); static unsigned char nas[19]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3), AL(3),AL(3),AL(4),AL(4),AL(4),AL(6), AL(6),AL(2),AL(5),AL(5),AL(3),AL(3), - AL(6)}; + AL(4)}; #undef AL asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned flags) @@ -738,52 +738,13 @@ asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, uns return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); } -asmlinkage long compat_sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr, - int __user *upeer_addrlen, - const compat_sigset_t __user *sigmask, - compat_size_t sigsetsize, int flags) -{ - compat_sigset_t ss32; - sigset_t ksigmask, sigsaved; - int ret; - - if (sigmask) { - if (sigsetsize != sizeof(compat_sigset_t)) - return -EINVAL; - if (copy_from_user(&ss32, sigmask, sizeof(ss32))) - return -EFAULT; - sigset_from_compat(&ksigmask, &ss32); - - sigdelsetmask(&ksigmask, sigmask(SIGKILL)|sigmask(SIGSTOP)); - sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved); - } - - ret = do_accept(fd, upeer_sockaddr, upeer_addrlen, flags); - - if (ret == -ERESTARTNOHAND) { - /* - * Don't restore the signal mask yet. Let do_signal() deliver - * the signal on the way back to userspace, before the signal - * mask is restored. - */ - if (sigmask) { - memcpy(¤t->saved_sigmask, &sigsaved, - sizeof(sigsaved)); - set_restore_sigmask(); - } - } else if (sigmask) - sigprocmask(SIG_SETMASK, &sigsaved, NULL); - - return ret; -} - asmlinkage long compat_sys_socketcall(int call, u32 __user *args) { int ret; u32 a[6]; u32 a0, a1; - if (call < SYS_SOCKET || call > SYS_PACCEPT) + if (call < SYS_SOCKET || call > SYS_ACCEPT4) return -EINVAL; if (copy_from_user(a, args, nas[call])) return -EFAULT; @@ -804,7 +765,7 @@ asmlinkage long compat_sys_socketcall(int call, u32 __user *args) ret = sys_listen(a0, a1); break; case SYS_ACCEPT: - ret = do_accept(a0, compat_ptr(a1), compat_ptr(a[2]), 0); + ret = sys_accept4(a0, compat_ptr(a1), compat_ptr(a[2]), 0); break; case SYS_GETSOCKNAME: ret = sys_getsockname(a0, compat_ptr(a1), compat_ptr(a[2])); @@ -844,9 +805,8 @@ asmlinkage long compat_sys_socketcall(int call, u32 __user *args) case SYS_RECVMSG: ret = compat_sys_recvmsg(a0, compat_ptr(a1), a[2]); break; - case SYS_PACCEPT: - ret = compat_sys_paccept(a0, compat_ptr(a1), compat_ptr(a[2]), - compat_ptr(a[3]), a[4], a[5]); + case SYS_ACCEPT4: + ret = sys_accept4(a0, compat_ptr(a1), compat_ptr(a[2]), a[3]); break; default: ret = -EINVAL; diff --git a/net/socket.c b/net/socket.c index 57550c3bcabe..92764d836891 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1426,8 +1426,8 @@ asmlinkage long sys_listen(int fd, int backlog) * clean when we restucture accept also. */ -long do_accept(int fd, struct sockaddr __user *upeer_sockaddr, - int __user *upeer_addrlen, int flags) +asmlinkage long sys_accept4(int fd, struct sockaddr __user *upeer_sockaddr, + int __user *upeer_addrlen, int flags) { struct socket *sock, *newsock; struct file *newfile; @@ -1510,66 +1510,10 @@ out_fd: goto out_put; } -#if 0 -#ifdef HAVE_SET_RESTORE_SIGMASK -asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr, - int __user *upeer_addrlen, - const sigset_t __user *sigmask, - size_t sigsetsize, int flags) -{ - sigset_t ksigmask, sigsaved; - int ret; - - if (sigmask) { - /* XXX: Don't preclude handling different sized sigset_t's. */ - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - if (copy_from_user(&ksigmask, sigmask, sizeof(ksigmask))) - return -EFAULT; - - sigdelsetmask(&ksigmask, sigmask(SIGKILL)|sigmask(SIGSTOP)); - sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved); - } - - ret = do_accept(fd, upeer_sockaddr, upeer_addrlen, flags); - - if (ret < 0 && signal_pending(current)) { - /* - * Don't restore the signal mask yet. Let do_signal() deliver - * the signal on the way back to userspace, before the signal - * mask is restored. - */ - if (sigmask) { - memcpy(¤t->saved_sigmask, &sigsaved, - sizeof(sigsaved)); - set_restore_sigmask(); - } - } else if (sigmask) - sigprocmask(SIG_SETMASK, &sigsaved, NULL); - - return ret; -} -#else -asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr, - int __user *upeer_addrlen, - const sigset_t __user *sigmask, - size_t sigsetsize, int flags) -{ - /* The platform does not support restoring the signal mask in the - * return path. So we do not allow using paccept() with a signal - * mask. */ - if (sigmask) - return -EINVAL; - - return do_accept(fd, upeer_sockaddr, upeer_addrlen, flags); -} -#endif -#endif - asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr, int __user *upeer_addrlen) { - return do_accept(fd, upeer_sockaddr, upeer_addrlen, 0); + return sys_accept4(fd, upeer_sockaddr, upeer_addrlen, 0); } /* @@ -2096,7 +2040,7 @@ static const unsigned char nargs[19]={ AL(0),AL(3),AL(3),AL(3),AL(2),AL(3), AL(3),AL(3),AL(4),AL(4),AL(4),AL(6), AL(6),AL(2),AL(5),AL(5),AL(3),AL(3), - AL(6) + AL(4) }; #undef AL @@ -2115,7 +2059,7 @@ asmlinkage long sys_socketcall(int call, unsigned long __user *args) unsigned long a0, a1; int err; - if (call < 1 || call > SYS_PACCEPT) + if (call < 1 || call > SYS_ACCEPT4) return -EINVAL; /* copy_from_user should be SMP safe. */ @@ -2143,9 +2087,8 @@ asmlinkage long sys_socketcall(int call, unsigned long __user *args) err = sys_listen(a0, a1); break; case SYS_ACCEPT: - err = - do_accept(a0, (struct sockaddr __user *)a1, - (int __user *)a[2], 0); + err = sys_accept4(a0, (struct sockaddr __user *)a1, + (int __user *)a[2], 0); break; case SYS_GETSOCKNAME: err = @@ -2192,12 +2135,9 @@ asmlinkage long sys_socketcall(int call, unsigned long __user *args) case SYS_RECVMSG: err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]); break; - case SYS_PACCEPT: - err = - sys_paccept(a0, (struct sockaddr __user *)a1, - (int __user *)a[2], - (const sigset_t __user *) a[3], - a[4], a[5]); + case SYS_ACCEPT4: + err = sys_accept4(a0, (struct sockaddr __user *)a1, + (int __user *)a[2], a[3]); break; default: err = -EINVAL; -- cgit v1.2.3 From f8b2256e9c11a825899345de06b39a4bdf44911d Mon Sep 17 00:00:00 2001 From: David Miller Date: Wed, 19 Nov 2008 15:36:15 -0800 Subject: sparc64: wire up accept4() This adds the sparc syscall hookups. Signed-off-by: David S. Miller Cc: Ulrich Drepper Cc: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sparc/include/asm/unistd_32.h | 3 ++- arch/sparc/include/asm/unistd_64.h | 3 ++- arch/sparc/kernel/systbls.S | 2 +- arch/sparc64/kernel/sys32.S | 13 ++++++++++++- arch/sparc64/kernel/systbls.S | 4 ++-- 5 files changed, 19 insertions(+), 6 deletions(-) diff --git a/arch/sparc/include/asm/unistd_32.h b/arch/sparc/include/asm/unistd_32.h index 648643a9f139..0d13d2a4c76f 100644 --- a/arch/sparc/include/asm/unistd_32.h +++ b/arch/sparc/include/asm/unistd_32.h @@ -338,8 +338,9 @@ #define __NR_dup3 320 #define __NR_pipe2 321 #define __NR_inotify_init1 322 +#define __NR_accept4 323 -#define NR_SYSCALLS 323 +#define NR_SYSCALLS 324 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, * it never had the plain ones and there is no value to adding those diff --git a/arch/sparc/include/asm/unistd_64.h b/arch/sparc/include/asm/unistd_64.h index c5cc0e052321..fa5d3c0343c7 100644 --- a/arch/sparc/include/asm/unistd_64.h +++ b/arch/sparc/include/asm/unistd_64.h @@ -340,8 +340,9 @@ #define __NR_dup3 320 #define __NR_pipe2 321 #define __NR_inotify_init1 322 +#define __NR_accept4 323 -#define NR_SYSCALLS 323 +#define NR_SYSCALLS 324 #ifdef __KERNEL__ #define __ARCH_WANT_IPC_PARSE_VERSION diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S index e1b9233b90ab..7d0807586442 100644 --- a/arch/sparc/kernel/systbls.S +++ b/arch/sparc/kernel/systbls.S @@ -81,4 +81,4 @@ sys_call_table: /*305*/ .long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait /*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate /*315*/ .long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1 +/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S index ade18ba0c686..f061c4dda9ef 100644 --- a/arch/sparc64/kernel/sys32.S +++ b/arch/sparc64/kernel/sys32.S @@ -150,7 +150,7 @@ sys32_mmap2: sys32_socketcall: /* %o0=call, %o1=args */ cmp %o0, 1 bl,pn %xcc, do_einval - cmp %o0, 17 + cmp %o0, 18 bg,pn %xcc, do_einval sub %o0, 1, %o0 sllx %o0, 5, %o0 @@ -319,6 +319,15 @@ do_sys_recvmsg: /* compat_sys_recvmsg(int, struct compat_msghdr *, unsigned int) nop nop nop +do_sys_accept4: /* sys_accept4(int, struct sockaddr *, int *, int) */ +63: ldswa [%o1 + 0x0] %asi, %o0 + sethi %hi(sys_accept4), %g1 +64: lduwa [%o1 + 0x8] %asi, %o2 +65: ldswa [%o1 + 0xc] %asi, %o3 + jmpl %g1 + %lo(sys_accept4), %g0 +66: lduwa [%o1 + 0x4] %asi, %o1 + nop + nop .section __ex_table,"a" .align 4 @@ -353,4 +362,6 @@ do_sys_recvmsg: /* compat_sys_recvmsg(int, struct compat_msghdr *, unsigned int) .word 57b, __retl_efault, 58b, __retl_efault .word 59b, __retl_efault, 60b, __retl_efault .word 61b, __retl_efault, 62b, __retl_efault + .word 63b, __retl_efault, 64b, __retl_efault + .word 65b, __retl_efault, 66b, __retl_efault .previous diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S index b2fa4c163638..9fc78cf354bd 100644 --- a/arch/sparc64/kernel/systbls.S +++ b/arch/sparc64/kernel/systbls.S @@ -82,7 +82,7 @@ sys_call_table32: .word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait /*310*/ .word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate .word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1 +/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 #endif /* CONFIG_COMPAT */ @@ -156,4 +156,4 @@ sys_call_table: .word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait /*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate .word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1 +/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 -- cgit v1.2.3 From 1c207f952a3a39f9d07a3e9de0cf6b9a9464eeaa Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 19 Nov 2008 15:36:16 -0800 Subject: Documentation/kernel-parameters.txt: add min_addr, fix max_addr Add "min_addr" documentation. For "max_addr", add nn before [KMG] since a number is needed and this is consistent with other uses of [KMG]. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kernel-parameters.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9fa6508892c2..899650c20cc2 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1193,8 +1193,8 @@ and is between 256 and 4096 characters. It is defined in the file it is equivalent to "nosmp", which also disables the IO APIC. - max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or - equal to this physical address is ignored. + max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater than + or equal to this physical address is ignored. max_luns= [SCSI] Maximum number of LUNs to probe. Should be between 1 and 2^32-1. @@ -1294,6 +1294,9 @@ and is between 256 and 4096 characters. It is defined in the file mga= [HW,DRM] + min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this + physical address is ignored. + mminit_loglevel= [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this parameter allows control of the logging verbosity for -- cgit v1.2.3 From 6e8ba729b6332f2a75572e02480936d2b51665aa Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 19 Nov 2008 15:36:17 -0800 Subject: gpiolib: extend gpio label column width in debugfs file There are already various drivers having bigger label than 12 bytes. Most of them fit well under 20 bytes but make column width exact so that oversized labels don't mess up output alignment. Signed-off-by: Jarkko Nikula Acked-by: David Brownell Cc: [2.6.26.x, 2.6.26.x, 2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index faa1cc66e9cf..82020abc329e 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1134,7 +1134,7 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip) continue; is_out = test_bit(FLAG_IS_OUT, &gdesc->flags); - seq_printf(s, " gpio-%-3d (%-12s) %s %s", + seq_printf(s, " gpio-%-3d (%-20.20s) %s %s", gpio, gdesc->label, is_out ? "out" : "in ", chip->get -- cgit v1.2.3 From 415d8cfa845ec9dac42e7b354b1f80485805455b Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Wed, 19 Nov 2008 15:36:18 -0800 Subject: GRU: fix for debug option Enable -D DEBUG in the GRU Makefile if CONFIG_SGI_GRU_DEBUG is selected. Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile index d03597a521b0..9e9170b3599a 100644 --- a/drivers/misc/sgi-gru/Makefile +++ b/drivers/misc/sgi-gru/Makefile @@ -1,3 +1,7 @@ +ifdef CONFIG_SGI_GRU_DEBUG + EXTRA_CFLAGS += -DDEBUG +endif + obj-$(CONFIG_SGI_GRU) := gru.o gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o -- cgit v1.2.3 From a495a6d35a026826d54a69d01f373681e14f59ac Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 19 Nov 2008 15:36:19 -0800 Subject: tmiofb: fix compilation with ACCEL disabled Restore support for compiling tmiofb with acceleration disabled. Signed-off-by: Dmitry Baryshkov Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/tmiofb.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c index 2a380011e9ba..7baf2dd12d50 100644 --- a/drivers/video/tmiofb.c +++ b/drivers/video/tmiofb.c @@ -222,6 +222,9 @@ static irqreturn_t tmiofb_irq(int irq, void *__info) unsigned int bbisc = tmio_ioread16(par->lcr + LCR_BBISC); + tmio_iowrite16(bbisc, par->lcr + LCR_BBISC); + +#ifdef CONFIG_FB_TMIO_ACCELL /* * We were in polling mode and now we got correct irq. * Switch back to IRQ-based sync of command FIFO @@ -231,9 +234,6 @@ static irqreturn_t tmiofb_irq(int irq, void *__info) par->use_polling = false; } - tmio_iowrite16(bbisc, par->lcr + LCR_BBISC); - -#ifdef CONFIG_FB_TMIO_ACCELL if (bbisc & 1) wake_up(&par->wait_acc); #endif @@ -938,7 +938,9 @@ static void tmiofb_dump_regs(struct platform_device *dev) static int tmiofb_suspend(struct platform_device *dev, pm_message_t state) { struct fb_info *info = platform_get_drvdata(dev); +#ifdef CONFIG_FB_TMIO_ACCELL struct tmiofb_par *par = info->par; +#endif struct mfd_cell *cell = dev->dev.platform_data; int retval = 0; @@ -950,12 +952,14 @@ static int tmiofb_suspend(struct platform_device *dev, pm_message_t state) info->fbops->fb_sync(info); +#ifdef CONFIG_FB_TMIO_ACCELL /* * The fb should be usable even if interrupts are disabled (and they are * during suspend/resume). Switch temporary to forced polling. */ printk(KERN_INFO "tmiofb: switching to polling\n"); par->use_polling = true; +#endif tmiofb_hw_stop(dev); if (cell->suspend) -- cgit v1.2.3 From f652c521e0bec2e70cf123f47e80117a7e6ed139 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Wed, 19 Nov 2008 15:36:19 -0800 Subject: lib/scatterlist.c: fix kunmap() argument in sg_miter_stop() kunmap() takes as argument the struct page that orginally got kmap()'d, however the sg_miter_stop() function passed it the kernel virtual address instead, resulting in weird stuff. Somehow I ended up fixing this bug by accident while looking for a bug in the same area. Reported-by: kerneloops.org Acked-by: Tejun Heo Signed-off-by: Arjan van de Ven Cc: Hugh Dickins Cc: [2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/scatterlist.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/scatterlist.c b/lib/scatterlist.c index 8d2688ff1352..b7b449dafbe5 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -395,7 +395,7 @@ void sg_miter_stop(struct sg_mapping_iter *miter) WARN_ON(!irqs_disabled()); kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ); } else - kunmap(miter->addr); + kunmap(miter->page); miter->page = NULL; miter->addr = NULL; -- cgit v1.2.3 From 393df744e056ba24e9531d0657d09fc3c7c0dd22 Mon Sep 17 00:00:00 2001 From: Ned Forrester Date: Wed, 19 Nov 2008 15:36:21 -0800 Subject: pxa2xx_spi: bugfix full duplex dma data corruption Fixes a data corruption bug in pxa2xx_spi.c when operating in full duplex mode with DMA and using buffers that overlap. SPI transmit and receive buffers are allowed to be the same or to overlap. However, this driver fails if such overlap is attempted in DMA mode because it maps the rx and tx buffers in the wrong order. By mapping DMA_FROM_DEVICE (read) before DMA_TO_DEVICE (write), it invalidates the cache before flushing it, thus discarding data which should have been transmitted. The patch corrects the order of mapping. This bug exists in all versions of pxa2xx_spi.c; similar bugs are in the drivers for two other SPI controllers (au1500, imx). A version of this patch has been tested on kernel 2.6.20 using verification of loopback data with: random transfer length, random bits-per-word, random positive offsets (both larger and smaller than transfer length) between the start of the rx and tx buffers, and varying clock rates. Signed-off-by: Ned Forrester Cc: Vernon Sauder Cc: J. Scott Merritt Signed-off-by: David Brownell Cc: [2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index dae87b1a4c6e..cf12f2d84be2 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -352,21 +352,21 @@ static int map_dma_buffers(struct driver_data *drv_data) } else drv_data->tx_map_len = drv_data->len; - /* Stream map the rx buffer */ - drv_data->rx_dma = dma_map_single(dev, drv_data->rx, - drv_data->rx_map_len, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, drv_data->rx_dma)) - return 0; - - /* Stream map the tx buffer */ + /* Stream map the tx buffer. Always do DMA_TO_DEVICE first + * so we flush the cache *before* invalidating it, in case + * the tx and rx buffers overlap. + */ drv_data->tx_dma = dma_map_single(dev, drv_data->tx, - drv_data->tx_map_len, - DMA_TO_DEVICE); + drv_data->tx_map_len, DMA_TO_DEVICE); + if (dma_mapping_error(dev, drv_data->tx_dma)) + return 0; - if (dma_mapping_error(dev, drv_data->tx_dma)) { - dma_unmap_single(dev, drv_data->rx_dma, + /* Stream map the rx buffer */ + drv_data->rx_dma = dma_map_single(dev, drv_data->rx, drv_data->rx_map_len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, drv_data->rx_dma)) { + dma_unmap_single(dev, drv_data->tx_dma, + drv_data->tx_map_len, DMA_TO_DEVICE); return 0; } -- cgit v1.2.3 From c267fd777a478d74fa8959628538b64088f67fd2 Mon Sep 17 00:00:00 2001 From: Bruno Prémont Date: Wed, 19 Nov 2008 15:36:23 -0800 Subject: viafb: fix releasing of /proc/viafb/ subtree MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When unloading viafb module it does not remove it's /proc/viafb/ subtree which causes multiple viafb directories to appear below proc when mobprobing viafb and also lets kernel WARN() on duplicate proc entries: [ 145.458387] WARNING: at /usr/src/linux-2.6.28-rc3-git6/fs/proc/generic.c:551 proc_register+0xe6/0x160() [ 145.458945] proc_dir_entry '/proc/viafb' already registered [ 145.459278] Modules linked in: viafb(+) i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect snd_hda_intel snd_pcm snd_timer snd soundcore snd_page_alloc sg via_agp agpgart [last unloaded: drm] [ 145.460647] Pid: 1904, comm: modprobe Tainted: G W 2.6.28-rc3-git6 #4 [ 145.461064] Call Trace: [ 145.461248] [] ? dump_stack+0x1/0x80 [ 145.461533] [] warn_slowpath+0x63/0x80 [ 145.461851] [] ? idr_get_empty_slot+0xe9/0x250 [ 145.462186] [] ? ida_get_new_above+0xf0/0x150 [ 145.462528] [] proc_register+0xe6/0x160 [ 145.462827] [] proc_mkdir_mode+0x36/0x50 [ 145.463135] [] proc_mkdir+0xf/0x20 [ 145.463457] [] viafb_init+0x73c/0xc86 [viafb] [ 145.463823] [] ? viafb_init+0x0/0xc86 [viafb] [ 145.464147] [] do_one_initcall+0x2d/0x160 [ 145.464460] [] ? sysfs_add_file+0x13/0x20 [ 145.464786] [] ? vfree+0x21/0x30 [ 145.465049] [] ? load_module+0x1215/0x1500 [ 145.465381] [] ? __alloc_pages_internal+0x95/0x400 [ 145.465755] [] sys_init_module+0x83/0x1a0 [ 145.466065] [] ? sys_read+0x3d/0x70 [ 145.466354] [] sysenter_do_call+0x12/0x25 [ 145.466653] ---[ end trace c84b37826e16748c ]--- Signed-off-by: Bruno Prémont Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/via/viafbdev.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index 0132eae06f55..73ac754ad801 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -2036,30 +2036,30 @@ static int viafb_vt1636_proc_write(struct file *file, return count; } -static void viafb_init_proc(struct proc_dir_entry *viafb_entry) +static void viafb_init_proc(struct proc_dir_entry **viafb_entry) { struct proc_dir_entry *entry; - viafb_entry = proc_mkdir("viafb", NULL); + *viafb_entry = proc_mkdir("viafb", NULL); if (viafb_entry) { - entry = create_proc_entry("dvp0", 0, viafb_entry); + entry = create_proc_entry("dvp0", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dvp0_proc_read; entry->write_proc = viafb_dvp0_proc_write; } - entry = create_proc_entry("dvp1", 0, viafb_entry); + entry = create_proc_entry("dvp1", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dvp1_proc_read; entry->write_proc = viafb_dvp1_proc_write; } - entry = create_proc_entry("dfph", 0, viafb_entry); + entry = create_proc_entry("dfph", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dfph_proc_read; entry->write_proc = viafb_dfph_proc_write; } - entry = create_proc_entry("dfpl", 0, viafb_entry); + entry = create_proc_entry("dfpl", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dfpl_proc_read; @@ -2068,7 +2068,7 @@ static void viafb_init_proc(struct proc_dir_entry *viafb_entry) if (VT1636_LVDS == viaparinfo->chip_info->lvds_chip_info. lvds_chip_name || VT1636_LVDS == viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name) { - entry = create_proc_entry("vt1636", 0, viafb_entry); + entry = create_proc_entry("vt1636", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_vt1636_proc_read; @@ -2087,6 +2087,7 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry) remove_proc_entry("dfpl", viafb_entry); remove_proc_entry("vt1636", viafb_entry); remove_proc_entry("vt1625", viafb_entry); + remove_proc_entry("viafb", NULL); } static int __devinit via_pci_probe(void) @@ -2348,7 +2349,7 @@ static int __devinit via_pci_probe(void) viafbinfo->node, viafbinfo->fix.id, default_var.xres, default_var.yres, default_var.bits_per_pixel); - viafb_init_proc(viaparinfo->proc_entry); + viafb_init_proc(&viaparinfo->proc_entry); viafb_init_dac(IGA2); return 0; } -- cgit v1.2.3 From b3b4dc8840a8fdbe495723d35cd976d781fd42fa Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 19 Nov 2008 15:36:25 -0800 Subject: lcd: fix oops if driver only interested in .set_power The LCD driver core calls LCD drivers when either the blanking state or the display mode has changed, but does not make any check to see if the called driver has a .set_mode method. This means if a driver only has a .set_power method then the system will OOPS on changing mode (and with the console semaphore held so you cannot easily see the problem). Fix the problem by ensuring that either callback is valid before use. Signed-off-by: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/lcd.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index 8e1731d3b228..680e57b616cd 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -42,10 +42,13 @@ static int fb_notifier_callback(struct notifier_block *self, mutex_lock(&ld->ops_lock); if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) { - if (event == FB_EVENT_BLANK) - ld->ops->set_power(ld, *(int *)evdata->data); - else - ld->ops->set_mode(ld, evdata->data); + if (event == FB_EVENT_BLANK) { + if (ld->ops->set_power) + ld->ops->set_power(ld, *(int *)evdata->data); + } else { + if (ld->ops->set_mode) + ld->ops->set_mode(ld, evdata->data); + } } mutex_unlock(&ld->ops_lock); return 0; -- cgit v1.2.3 From 3b45d6380c392e402adc460e4ccf7d41e0caf82a Mon Sep 17 00:00:00 2001 From: Andrea Paterniani Date: Wed, 19 Nov 2008 15:36:26 -0800 Subject: spi_imx: full duplex dma corruption bugfix Fix unsafe order in dma mapping operation: always flush data from the cache *BEFORE* invalidating it, to allow full duplex transfers where the same buffer may be used for both writes and reads. Signed-off-by: Andrea Paterniani Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_imx.c | 45 ++++++++++++++++++++++----------------------- 1 file changed, 22 insertions(+), 23 deletions(-) diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 61ba147e384d..0b4db0ce78d6 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -506,20 +506,6 @@ static int map_dma_buffers(struct driver_data *drv_data) if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx)) return -1; - /* NULL rx means write-only transfer and no map needed - since rx DMA will not be used */ - if (drv_data->rx) { - buf = drv_data->rx; - drv_data->rx_dma = dma_map_single( - dev, - buf, - drv_data->len, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, drv_data->rx_dma)) - return -1; - drv_data->rx_dma_needs_unmap = 1; - } - if (drv_data->tx == NULL) { /* Read only message --> use drv_data->dummy_dma_buf for dummy writes to achive reads */ @@ -533,18 +519,31 @@ static int map_dma_buffers(struct driver_data *drv_data) buf, drv_data->tx_map_len, DMA_TO_DEVICE); - if (dma_mapping_error(dev, drv_data->tx_dma)) { - if (drv_data->rx_dma) { - dma_unmap_single(dev, - drv_data->rx_dma, - drv_data->len, - DMA_FROM_DEVICE); - drv_data->rx_dma_needs_unmap = 0; - } + if (dma_mapping_error(dev, drv_data->tx_dma)) return -1; - } drv_data->tx_dma_needs_unmap = 1; + /* NULL rx means write-only transfer and no map needed + * since rx DMA will not be used */ + if (drv_data->rx) { + buf = drv_data->rx; + drv_data->rx_dma = dma_map_single(dev, + buf, + drv_data->len, + DMA_FROM_DEVICE); + if (dma_mapping_error(dev, drv_data->rx_dma)) { + if (drv_data->tx_dma) { + dma_unmap_single(dev, + drv_data->tx_dma, + drv_data->tx_map_len, + DMA_TO_DEVICE); + drv_data->tx_dma_needs_unmap = 0; + } + return -1; + } + drv_data->rx_dma_needs_unmap = 1; + } + return 0; } -- cgit v1.2.3 From ac97b9f9a2d0b83488e0bbcb8517b229d5c9b142 Mon Sep 17 00:00:00 2001 From: Michael Halcrow Date: Wed, 19 Nov 2008 15:36:28 -0800 Subject: eCryptfs: Allocate up to two scatterlists for crypto ops on keys I have received some reports of out-of-memory errors on some older AMD architectures. These errors are what I would expect to see if crypt_stat->key were split between two separate pages. eCryptfs should not assume that any of the memory sent through virt_to_scatterlist() is all contained in a single page, and so this patch allocates two scatterlist structs instead of one when processing keys. I have received confirmation from one person affected by this bug that this patch resolves the issue for him, and so I am submitting it for inclusion in a future stable release. Note that virt_to_scatterlist() runs sg_init_table() on the scatterlist structs passed to it, so the calls to sg_init_table() in decrypt_passphrase_encrypted_session_key() are redundant. Signed-off-by: Michael Halcrow Reported-by: Paulo J. S. Silva Cc: "Leon Woestenberg" Cc: Tim Gardner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ecryptfs/keystore.c | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-) diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c index e22bc3961345..0d713b691941 100644 --- a/fs/ecryptfs/keystore.c +++ b/fs/ecryptfs/keystore.c @@ -1037,17 +1037,14 @@ static int decrypt_passphrase_encrypted_session_key(struct ecryptfs_auth_tok *auth_tok, struct ecryptfs_crypt_stat *crypt_stat) { - struct scatterlist dst_sg; - struct scatterlist src_sg; + struct scatterlist dst_sg[2]; + struct scatterlist src_sg[2]; struct mutex *tfm_mutex; struct blkcipher_desc desc = { .flags = CRYPTO_TFM_REQ_MAY_SLEEP }; int rc = 0; - sg_init_table(&dst_sg, 1); - sg_init_table(&src_sg, 1); - if (unlikely(ecryptfs_verbosity > 0)) { ecryptfs_printk( KERN_DEBUG, "Session key encryption key (size [%d]):\n", @@ -1066,8 +1063,8 @@ decrypt_passphrase_encrypted_session_key(struct ecryptfs_auth_tok *auth_tok, } rc = virt_to_scatterlist(auth_tok->session_key.encrypted_key, auth_tok->session_key.encrypted_key_size, - &src_sg, 1); - if (rc != 1) { + src_sg, 2); + if (rc < 1 || rc > 2) { printk(KERN_ERR "Internal error whilst attempting to convert " "auth_tok->session_key.encrypted_key to scatterlist; " "expected rc = 1; got rc = [%d]. " @@ -1079,8 +1076,8 @@ decrypt_passphrase_encrypted_session_key(struct ecryptfs_auth_tok *auth_tok, auth_tok->session_key.encrypted_key_size; rc = virt_to_scatterlist(auth_tok->session_key.decrypted_key, auth_tok->session_key.decrypted_key_size, - &dst_sg, 1); - if (rc != 1) { + dst_sg, 2); + if (rc < 1 || rc > 2) { printk(KERN_ERR "Internal error whilst attempting to convert " "auth_tok->session_key.decrypted_key to scatterlist; " "expected rc = 1; got rc = [%d]\n", rc); @@ -1096,7 +1093,7 @@ decrypt_passphrase_encrypted_session_key(struct ecryptfs_auth_tok *auth_tok, rc = -EINVAL; goto out; } - rc = crypto_blkcipher_decrypt(&desc, &dst_sg, &src_sg, + rc = crypto_blkcipher_decrypt(&desc, dst_sg, src_sg, auth_tok->session_key.encrypted_key_size); mutex_unlock(tfm_mutex); if (unlikely(rc)) { @@ -1539,8 +1536,8 @@ write_tag_3_packet(char *dest, size_t *remaining_bytes, size_t i; size_t encrypted_session_key_valid = 0; char session_key_encryption_key[ECRYPTFS_MAX_KEY_BYTES]; - struct scatterlist dst_sg; - struct scatterlist src_sg; + struct scatterlist dst_sg[2]; + struct scatterlist src_sg[2]; struct mutex *tfm_mutex = NULL; u8 cipher_code; size_t packet_size_length; @@ -1619,8 +1616,8 @@ write_tag_3_packet(char *dest, size_t *remaining_bytes, ecryptfs_dump_hex(session_key_encryption_key, 16); } rc = virt_to_scatterlist(crypt_stat->key, key_rec->enc_key_size, - &src_sg, 1); - if (rc != 1) { + src_sg, 2); + if (rc < 1 || rc > 2) { ecryptfs_printk(KERN_ERR, "Error generating scatterlist " "for crypt_stat session key; expected rc = 1; " "got rc = [%d]. key_rec->enc_key_size = [%d]\n", @@ -1629,8 +1626,8 @@ write_tag_3_packet(char *dest, size_t *remaining_bytes, goto out; } rc = virt_to_scatterlist(key_rec->enc_key, key_rec->enc_key_size, - &dst_sg, 1); - if (rc != 1) { + dst_sg, 2); + if (rc < 1 || rc > 2) { ecryptfs_printk(KERN_ERR, "Error generating scatterlist " "for crypt_stat encrypted session key; " "expected rc = 1; got rc = [%d]. " @@ -1651,7 +1648,7 @@ write_tag_3_packet(char *dest, size_t *remaining_bytes, rc = 0; ecryptfs_printk(KERN_DEBUG, "Encrypting [%d] bytes of the key\n", crypt_stat->key_size); - rc = crypto_blkcipher_encrypt(&desc, &dst_sg, &src_sg, + rc = crypto_blkcipher_encrypt(&desc, dst_sg, src_sg, (*key_rec).enc_key_size); mutex_unlock(tfm_mutex); if (rc) { -- cgit v1.2.3 From f481891fdc49d3d1b8a9674a1825d183069a805f Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 19 Nov 2008 15:36:30 -0800 Subject: cpuset: update top cpuset's mems after adding a node After adding a node into the machine, top cpuset's mems isn't updated. By reviewing the code, we found that the update function cpuset_track_online_nodes() was invoked after node_states[N_ONLINE] changes. It is wrong because N_ONLINE just means node has pgdat, and if node has/added memory, we use N_HIGH_MEMORY. So, We should invoke the update function after node_states[N_HIGH_MEMORY] changes, just like its commit says. This patch fixes it. And we use notifier of memory hotplug instead of direct calling of cpuset_track_online_nodes(). Signed-off-by: Miao Xie Acked-by: Yasunori Goto Cc: David Rientjes Cc: Paul Menage Signed-off-by: Linus Torvalds --- include/linux/cpuset.h | 4 ---- kernel/cpuset.c | 19 ++++++++++++++++--- mm/memory_hotplug.c | 3 --- 3 files changed, 16 insertions(+), 10 deletions(-) diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 2691926fb506..8e540d32c9fe 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -74,8 +74,6 @@ static inline int cpuset_do_slab_mem_spread(void) return current->flags & PF_SPREAD_SLAB; } -extern void cpuset_track_online_nodes(void); - extern int current_cpuset_is_being_rebound(void); extern void rebuild_sched_domains(void); @@ -151,8 +149,6 @@ static inline int cpuset_do_slab_mem_spread(void) return 0; } -static inline void cpuset_track_online_nodes(void) {} - static inline int current_cpuset_is_being_rebound(void) { return 0; diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 81fc6791a296..da7ff6137f37 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -2015,12 +2016,23 @@ static int cpuset_track_online_cpus(struct notifier_block *unused_nb, * Call this routine anytime after node_states[N_HIGH_MEMORY] changes. * See also the previous routine cpuset_track_online_cpus(). */ -void cpuset_track_online_nodes(void) +static int cpuset_track_online_nodes(struct notifier_block *self, + unsigned long action, void *arg) { cgroup_lock(); - top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; - scan_for_empty_cpusets(&top_cpuset); + switch (action) { + case MEM_ONLINE: + top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; + break; + case MEM_OFFLINE: + top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; + scan_for_empty_cpusets(&top_cpuset); + break; + default: + break; + } cgroup_unlock(); + return NOTIFY_OK; } #endif @@ -2036,6 +2048,7 @@ void __init cpuset_init_smp(void) top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; hotcpu_notifier(cpuset_track_online_cpus, 0); + hotplug_memory_notifier(cpuset_track_online_nodes, 10); } /** diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 6837a1014372..b5b2b15085a8 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -498,8 +497,6 @@ int add_memory(int nid, u64 start, u64 size) /* we online node here. we can't roll back from here. */ node_set_online(nid); - cpuset_track_online_nodes(); - if (new_pgdat) { ret = register_one_node(nid); /* -- cgit v1.2.3 From f011c2dae6cffc50ef67d9bd937b488ba5db8913 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 19 Nov 2008 15:36:32 -0800 Subject: mm: vmalloc allocator off by one Fix off by one bug in the KVA allocator that can leave gaps in the address space. Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index ba6b0f5f7fac..46aab4dbf618 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -362,7 +362,7 @@ retry: goto found; } - while (addr + size >= first->va_start && addr + size <= vend) { + while (addr + size > first->va_start && addr + size <= vend) { addr = ALIGN(first->va_end + PAGE_SIZE, align); n = rb_next(&first->rb_node); -- cgit v1.2.3 From 496850e5f5a372029ceb2b35c811770a9bb073b6 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 19 Nov 2008 15:36:33 -0800 Subject: mm: vmalloc failure flush fix An initial vmalloc failure should start off a synchronous flush of lazy areas, in case someone is in progress flushing them already, which could cause us to return an allocation failure even if there is plenty of KVA free. Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 46aab4dbf618..04f5e320e744 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -521,6 +521,17 @@ static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end, spin_unlock(&purge_lock); } +/* + * Kick off a purge of the outstanding lazy areas. Don't bother if somebody + * is already purging. + */ +static void try_purge_vmap_area_lazy(void) +{ + unsigned long start = ULONG_MAX, end = 0; + + __purge_vmap_area_lazy(&start, &end, 0, 0); +} + /* * Kick off a purge of the outstanding lazy areas. */ @@ -528,7 +539,7 @@ static void purge_vmap_area_lazy(void) { unsigned long start = ULONG_MAX, end = 0; - __purge_vmap_area_lazy(&start, &end, 0, 0); + __purge_vmap_area_lazy(&start, &end, 1, 0); } /* @@ -539,7 +550,7 @@ static void free_unmap_vmap_area(struct vmap_area *va) va->flags |= VM_LAZY_FREE; atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr); if (unlikely(atomic_read(&vmap_lazy_nr) > lazy_max_pages())) - purge_vmap_area_lazy(); + try_purge_vmap_area_lazy(); } static struct vmap_area *find_vmap_area(unsigned long addr) -- cgit v1.2.3 From 0ae15132a4f5c758a6ffcde74495641dc3f62ba1 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 19 Nov 2008 15:36:33 -0800 Subject: mm: vmalloc search restart fix Current vmalloc restart search for a free area in case we can't find one. The reason is there are areas which are lazily freed, and could be possibly freed now. However, current implementation start searching the tree from the last failing address, which is pretty much by definition at the end of address space. So, we fail. The proposal of this patch is to restart the search from the beginning of the requested vstart address. This fixes the regression in running KVM virtual machines for me, described in http://lkml.org/lkml/2008/10/28/349, caused by commit db64fe02258f1507e13fe5212a989922323685ce. Signed-off-by: Glauber Costa Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 04f5e320e744..30f826d484f0 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -324,14 +324,14 @@ static struct vmap_area *alloc_vmap_area(unsigned long size, BUG_ON(size & ~PAGE_MASK); - addr = ALIGN(vstart, align); - va = kmalloc_node(sizeof(struct vmap_area), gfp_mask & GFP_RECLAIM_MASK, node); if (unlikely(!va)) return ERR_PTR(-ENOMEM); retry: + addr = ALIGN(vstart, align); + spin_lock(&vmap_area_lock); /* XXX: could have a last_hole cache */ n = vmap_area_root.rb_node; -- cgit v1.2.3 From 3fa59dfbc3b223f02c26593be69ce6fc9a940405 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 19 Nov 2008 15:36:34 -0800 Subject: cgroup: fix potential deadlock in pre_destroy As Balbir pointed out, memcg's pre_destroy handler has potential deadlock. It has following lock sequence. cgroup_mutex (cgroup_rmdir) -> pre_destroy -> mem_cgroup_pre_destroy-> force_empty -> cpu_hotplug.lock. (lru_add_drain_all-> schedule_work-> get_online_cpus) But, cpuset has following. cpu_hotplug.lock (call notifier) -> cgroup_mutex. (within notifier) Then, this lock sequence should be fixed. Considering how pre_destroy works, it's not necessary to holding cgroup_mutex() while calling it. As a side effect, we don't have to wait at this mutex while memcg's force_empty works.(it can be long when there are tons of pages.) Signed-off-by: KAMEZAWA Hiroyuki Acked-by: Balbir Singh Cc: Li Zefan Cc: Paul Menage Cc: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 358e77564e6f..1a06be61dcd0 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2472,10 +2472,7 @@ static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry) mutex_unlock(&cgroup_mutex); return -EBUSY; } - - parent = cgrp->parent; - root = cgrp->root; - sb = root->sb; + mutex_unlock(&cgroup_mutex); /* * Call pre_destroy handlers of subsys. Notify subsystems @@ -2483,7 +2480,14 @@ static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry) */ cgroup_call_pre_destroy(cgrp); - if (cgroup_has_css_refs(cgrp)) { + mutex_lock(&cgroup_mutex); + parent = cgrp->parent; + root = cgrp->root; + sb = root->sb; + + if (atomic_read(&cgrp->count) + || !list_empty(&cgrp->children) + || cgroup_has_css_refs(cgrp)) { mutex_unlock(&cgroup_mutex); return -EBUSY; } -- cgit v1.2.3 From 966c8c12dc9e77f931e2281ba25d2f0244b06949 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 19 Nov 2008 15:36:36 -0800 Subject: sprint_symbol(): use less stack sprint_symbol(), itself used when dumping stacks, has been wasting 128 bytes of stack: lookup the symbol directly into the buffer supplied by the caller, instead of using a locally declared namebuf. I believe the name != buffer strcpy() is obsolete: the design here dates from when module symbol lookup pointed into a supposedly const but sadly volatile table; nowadays it copies, but an uncalled strcpy() looks better here than the risk of a recursive BUG_ON(). Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kallsyms.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c index 5072cf1685a2..7b8b0f21a5b1 100644 --- a/kernel/kallsyms.c +++ b/kernel/kallsyms.c @@ -304,17 +304,24 @@ int sprint_symbol(char *buffer, unsigned long address) char *modname; const char *name; unsigned long offset, size; - char namebuf[KSYM_NAME_LEN]; + int len; - name = kallsyms_lookup(address, &size, &offset, &modname, namebuf); + name = kallsyms_lookup(address, &size, &offset, &modname, buffer); if (!name) return sprintf(buffer, "0x%lx", address); + if (name != buffer) + strcpy(buffer, name); + len = strlen(buffer); + buffer += len; + if (modname) - return sprintf(buffer, "%s+%#lx/%#lx [%s]", name, offset, - size, modname); + len += sprintf(buffer, "+%#lx/%#lx [%s]", + offset, size, modname); else - return sprintf(buffer, "%s+%#lx/%#lx", name, offset, size); + len += sprintf(buffer, "+%#lx/%#lx", offset, size); + + return len; } /* Look up a kernel symbol and print it to the kernel messages. */ -- cgit v1.2.3 From bda8550deed96687f29992d711a88ea21cff4d26 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 19 Nov 2008 15:36:36 -0800 Subject: migration: fix writepage error Page migration's writeout() has got understandably confused by the nasty AOP_WRITEPAGE_ACTIVATE case: as in normal success, a writepage() error has unlocked the page, so writeout() then needs to relock it. Signed-off-by: Hugh Dickins Cc: KAMEZAWA Hiroyuki Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/mm/migrate.c b/mm/migrate.c index 385db89f0c33..1e0d6b237f44 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -522,15 +522,12 @@ static int writeout(struct address_space *mapping, struct page *page) remove_migration_ptes(page, page); rc = mapping->a_ops->writepage(page, &wbc); - if (rc < 0) - /* I/O Error writing */ - return -EIO; if (rc != AOP_WRITEPAGE_ACTIVATE) /* unlocked. Relock */ lock_page(page); - return -EAGAIN; + return (rc < 0) ? -EIO : -EAGAIN; } /* -- cgit v1.2.3 From 63eb6b93ce725e4c5f38fc85dd703d49465b03cb Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 19 Nov 2008 15:36:37 -0800 Subject: vmscan: let GFP_NOFS go to swap again In the past, GFP_NOFS (but of course not GFP_NOIO) was allowed to reclaim by writing to swap. That got partially broken in 2.6.23, when may_enter_fs initialization was moved up before the allocation of swap, so its PageSwapCache test was failing the first time around, Fix it by setting may_enter_fs when add_to_swap() succeeds with __GFP_IO. In fact, check __GFP_IO before calling add_to_swap(): allocating swap we're not ready to use just increases disk seeking. Signed-off-by: Hugh Dickins Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/vmscan.c b/mm/vmscan.c index c141b3e78071..f83a7ed5c6c4 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -623,6 +623,8 @@ static unsigned long shrink_page_list(struct list_head *page_list, * Try to allocate it some swap space here. */ if (PageAnon(page) && !PageSwapCache(page)) { + if (!(sc->gfp_mask & __GFP_IO)) + goto keep_locked; switch (try_to_munlock(page)) { case SWAP_FAIL: /* shouldn't happen */ case SWAP_AGAIN: @@ -634,6 +636,7 @@ static unsigned long shrink_page_list(struct list_head *page_list, } if (!add_to_swap(page, GFP_ATOMIC)) goto activate_locked; + may_enter_fs = 1; } #endif /* CONFIG_SWAP */ -- cgit v1.2.3 From f9454548e17cd56bad081bd7d55a09b001950cbb Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 19 Nov 2008 15:36:38 -0800 Subject: don't unlink an active swapfile Peter Cordes is sorry that he rm'ed his swapfiles while they were in use, he then had no pathname to swapoff. It's a curious little oversight, but not one worth a lot of hackery. Kudos to Willy Tarreau for turning this around from a discussion of synthetic pathnames to how to prevent unlink. Mimic immutable: prohibit unlinking an active swapfile in may_delete() (and don't worry my little head over the tiny race window). Signed-off-by: Hugh Dickins Cc: Willy Tarreau Acked-by: Christoph Hellwig Cc: Peter Cordes Cc: Bodo Eggert <7eggert@gmx.de> Cc: David Newall Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index 09ce58e49e72..d34e0f9681c6 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1378,7 +1378,7 @@ static int may_delete(struct inode *dir,struct dentry *victim,int isdir) if (IS_APPEND(dir)) return -EPERM; if (check_sticky(dir, victim->d_inode)||IS_APPEND(victim->d_inode)|| - IS_IMMUTABLE(victim->d_inode)) + IS_IMMUTABLE(victim->d_inode) || IS_SWAPFILE(victim->d_inode)) return -EPERM; if (isdir) { if (!S_ISDIR(victim->d_inode->i_mode)) -- cgit v1.2.3 From c0d861afa5c986f7fe23647fbe411cd300f7c927 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 19 Nov 2008 15:36:41 -0800 Subject: drivers/video/backlight/da903x.c: introduce missing kfree Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Cc: Mike Rapoport Cc: Richard Purdie Cc: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/da903x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x.c index 242c38250166..75388b959439 100644 --- a/drivers/video/backlight/da903x.c +++ b/drivers/video/backlight/da903x.c @@ -119,6 +119,7 @@ static int da903x_backlight_probe(struct platform_device *pdev) default: dev_err(&pdev->dev, "invalid backlight device ID(%d)\n", pdev->id); + kfree(data); return -EINVAL; } -- cgit v1.2.3 From 45a3a36b6333b9ddfb0c57602d959a8d05bc47e4 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 19 Nov 2008 15:36:42 -0800 Subject: drivers/hwmon/applesmc.c: add generic MacPro support In order to analyze the SMC of the newer MacPros, applesmc needs to recognize the machine. This patch adds the missing generic dmi_match entry for MacPro models. Signed-off-by: Henrik Rydberg Cc: Nicolas Boichat Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 10977b3d201c..f7dce8b9f64b 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -1354,6 +1354,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, &applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple MacPro", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") }, + &applesmc_dmi_data[4]}, { applesmc_dmi_match, "Apple iMac 8", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") }, -- cgit v1.2.3 From 8e324c19f57cc05922e9cc0f338b58108da45539 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 19 Nov 2008 15:36:43 -0800 Subject: MAINTAINERS: change email address for rostedt I find that I answer my email quicker on my home email account, than I do on my work email. Not to mention that I never check my work email while traveling. Please change my email address in the MAINTAINERS file from srostedt@redhat.com to rostedt@goodmis.org. Signed-off-by: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 627e4c89328e..618c1ef4a397 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1809,7 +1809,7 @@ S: Maintained FTRACE P: Steven Rostedt -M: srostedt@redhat.com +M: rostedt@goodmis.org S: Maintained FUJITSU FR-V (FRV) PORT -- cgit v1.2.3 From 00d8089c54867053a5aae062b765f257ca419e27 Mon Sep 17 00:00:00 2001 From: Rik van Riel Date: Wed, 19 Nov 2008 15:36:44 -0800 Subject: vmscan: fix get_scan_ratio() comment Fix the old comment on the scan ratio calculations. Signed-off-by: Rik van Riel Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index f83a7ed5c6c4..7ea1440b53db 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1389,9 +1389,9 @@ static void get_scan_ratio(struct zone *zone, struct scan_control *sc, file_prio = 200 - sc->swappiness; /* - * anon recent_rotated[0] - * %anon = 100 * ----------- / ----------------- * IO cost - * anon + file rotate_sum + * The amount of pressure on anon vs file pages is inversely + * proportional to the fraction of recently scanned pages on + * each list that were recently referenced and in active use. */ ap = (anon_prio + 1) * (zone->recent_scanned[0] + 1); ap /= zone->recent_rotated[0] + 1; -- cgit v1.2.3 From ee11940f8e7a2f064af22d52180cb5f9643eef61 Mon Sep 17 00:00:00 2001 From: Vlada Peric Date: Wed, 19 Nov 2008 15:36:45 -0800 Subject: cirrusfb: remove unused variables MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After commit a1d35a7a (cirrusfb: use modedb and add mode_option parameter), these variables are no longer used, so remove them to fix compilation warning. Signed-off-by: Vlada Periæ Acked-by: Krzysztof Helt Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/cirrusfb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 8a8760230bc7..a2aa6ddffbe2 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -2462,8 +2462,7 @@ static int __init cirrusfb_init(void) #ifndef MODULE static int __init cirrusfb_setup(char *options) { - char *this_opt, s[32]; - int i; + char *this_opt; DPRINTK("ENTER\n"); -- cgit v1.2.3 From ea7e743e49b94749fc739baaf160809ed279aeda Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Wed, 19 Nov 2008 15:36:46 -0800 Subject: hostfs: fix a duplicated global function name fs/hostfs/hostfs_user.c defines do_readlink() as non-static, and so does fs/xfs/linux-2.6/xfs_ioctl.c when CONFIG_XFS_DEBUG=y. So rename do_readlink() in hostfs to hostfs_do_readlink(). I think it's better if XFS guys will also rename their do_readlink(), it's not necessary to use such a general name. Signed-off-by: WANG Cong Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/hostfs/hostfs.h | 2 +- fs/hostfs/hostfs_kern.c | 4 ++-- fs/hostfs/hostfs_user.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h index 6ae9011b95eb..2f34f8f2134b 100644 --- a/fs/hostfs/hostfs.h +++ b/fs/hostfs/hostfs.h @@ -81,7 +81,7 @@ extern int do_rmdir(const char *file); extern int do_mknod(const char *file, int mode, unsigned int major, unsigned int minor); extern int link_file(const char *from, const char *to); -extern int do_readlink(char *file, char *buf, int size); +extern int hostfs_do_readlink(char *file, char *buf, int size); extern int rename_file(char *from, char *to); extern int do_statfs(char *root, long *bsize_out, long long *blocks_out, long long *bfree_out, long long *bavail_out, diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c index 7f34f4385de0..3a31451ac170 100644 --- a/fs/hostfs/hostfs_kern.c +++ b/fs/hostfs/hostfs_kern.c @@ -168,7 +168,7 @@ static char *follow_link(char *link) if (name == NULL) goto out; - n = do_readlink(link, name, len); + n = hostfs_do_readlink(link, name, len); if (n < len) break; len *= 2; @@ -943,7 +943,7 @@ int hostfs_link_readpage(struct file *file, struct page *page) name = inode_name(page->mapping->host, 0); if (name == NULL) return -ENOMEM; - err = do_readlink(name, buffer, PAGE_CACHE_SIZE); + err = hostfs_do_readlink(name, buffer, PAGE_CACHE_SIZE); kfree(name); if (err == PAGE_CACHE_SIZE) err = -E2BIG; diff --git a/fs/hostfs/hostfs_user.c b/fs/hostfs/hostfs_user.c index 53fd0a67c11a..b79424f93282 100644 --- a/fs/hostfs/hostfs_user.c +++ b/fs/hostfs/hostfs_user.c @@ -377,7 +377,7 @@ int link_file(const char *to, const char *from) return 0; } -int do_readlink(char *file, char *buf, int size) +int hostfs_do_readlink(char *file, char *buf, int size) { int n; -- cgit v1.2.3 From 33d283bef23132c48195eafc21449f8ba88fce6b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 19 Nov 2008 15:36:48 -0800 Subject: cgroups: fix a serious bug in cgroupstats Try this, and you'll get oops immediately: # cd Documentation/accounting/ # gcc -o getdelays getdelays.c # mount -t cgroup -o debug xxx /mnt # ./getdelays -C /mnt/tasks Because a normal file's dentry->d_fsdata is a pointer to struct cftype, not struct cgroup. After the patch, it returns EINVAL if we try to get cgroupstats from a normal file. Cc: Balbir Singh Signed-off-by: Li Zefan Acked-by: Paul Menage Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 1a06be61dcd0..fe00b3b983a8 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2039,10 +2039,13 @@ int cgroupstats_build(struct cgroupstats *stats, struct dentry *dentry) struct cgroup *cgrp; struct cgroup_iter it; struct task_struct *tsk; + /* - * Validate dentry by checking the superblock operations + * Validate dentry by checking the superblock operations, + * and make sure it's a directory. */ - if (dentry->d_sb->s_op != &cgroup_ops) + if (dentry->d_sb->s_op != &cgroup_ops || + !S_ISDIR(dentry->d_inode->i_mode)) goto err; ret = 0; -- cgit v1.2.3 From f55491a4bcbe8bab337bc00830ca12d703ea2613 Mon Sep 17 00:00:00 2001 From: Mike Rapoport <[mailto:mike@compulab.co.il]> Date: Wed, 19 Nov 2008 15:36:49 -0800 Subject: drivers/video/backlight/da903x.c: introduce one more missing kfree One more error handling code should have kfree as well Signed-off-by: Mike Rapoport Acked-by: Eric Miao Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/da903x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x.c index 75388b959439..93bb4340cc64 100644 --- a/drivers/video/backlight/da903x.c +++ b/drivers/video/backlight/da903x.c @@ -131,6 +131,7 @@ static int da903x_backlight_probe(struct platform_device *pdev) data, &da903x_backlight_ops); if (IS_ERR(bl)) { dev_err(&pdev->dev, "failed to register backlight\n"); + kfree(data); return PTR_ERR(bl); } -- cgit v1.2.3 From 06b0d4dc14a44dd9b57321c24f7eeb10b345abd8 Mon Sep 17 00:00:00 2001 From: "Stanley.Miao" Date: Wed, 19 Nov 2008 15:36:50 -0800 Subject: W1 OMAP: Fix OMAP LDP boot crash OMAP LDP boot crash. This is because w1 subsystem changed the search interface, so update omap_hdq's search interface to follow the change. Signed-off-by: Stanley.Miao Signed-off-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/masters/omap_hdq.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c index 1295625c4825..c973889110c8 100644 --- a/drivers/w1/masters/omap_hdq.c +++ b/drivers/w1/masters/omap_hdq.c @@ -86,8 +86,8 @@ static struct platform_driver omap_hdq_driver = { static u8 omap_w1_read_byte(void *_hdq); static void omap_w1_write_byte(void *_hdq, u8 byte); static u8 omap_w1_reset_bus(void *_hdq); -static void omap_w1_search_bus(void *_hdq, u8 search_type, - w1_slave_found_callback slave_found); +static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev, + u8 search_type, w1_slave_found_callback slave_found); static struct w1_bus_master omap_w1_master = { @@ -231,8 +231,8 @@ static u8 omap_w1_reset_bus(void *_hdq) } /* W1 search callback function */ -static void omap_w1_search_bus(void *_hdq, u8 search_type, - w1_slave_found_callback slave_found) +static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev, + u8 search_type, w1_slave_found_callback slave_found) { u64 module_id, rn_le, cs, id; @@ -249,7 +249,7 @@ static void omap_w1_search_bus(void *_hdq, u8 search_type, cs = w1_calc_crc8((u8 *)&rn_le, 7); id = (cs << 56) | module_id; - slave_found(_hdq, id); + slave_found(master_dev, id); } static int _omap_hdq_reset(struct hdq_data *hdq_data) -- cgit v1.2.3 From 9f92f4719764acf1c9185a5958200887a43e3483 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 19 Nov 2008 15:36:51 -0800 Subject: cciss: fix DEBUG printk formats Fix printk format warnings when CCISS_DEBUG is defined. drivers/block/cciss.c:2856: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' drivers/block/cciss.c:3205: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int' drivers/block/cciss.c:3236: warning: format '%x' expects type 'unsigned int', but argument 2 has type '__u64' drivers/block/cciss.c:3246: warning: format '%x' expects type 'unsigned int', but argument 2 has type '__u64' Signed-off-by: Randy Dunlap Cc: Mike Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 12de1fdaa6c6..9364dc554257 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2847,7 +2847,7 @@ static void do_cciss_request(struct request_queue *q) h->maxSG = seg; #ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n", + printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n", creq->nr_sectors, seg); #endif /* CCISS_DEBUG */ @@ -3197,7 +3197,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */ #ifdef CCISS_DEBUG - printk("address 0 = %x\n", c->paddr); + printk("address 0 = %lx\n", c->paddr); #endif /* CCISS_DEBUG */ c->vaddr = remap_pci_mem(c->paddr, 0x250); @@ -3224,7 +3224,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) #endif /* CCISS_DEBUG */ cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr); #ifdef CCISS_DEBUG - printk("cfg base address index = %x\n", cfg_base_addr_index); + printk("cfg base address index = %llx\n", + (unsigned long long)cfg_base_addr_index); #endif /* CCISS_DEBUG */ if (cfg_base_addr_index == -1) { printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n"); @@ -3234,7 +3235,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET); #ifdef CCISS_DEBUG - printk("cfg offset = %x\n", cfg_offset); + printk("cfg offset = %llx\n", (unsigned long long)cfg_offset); #endif /* CCISS_DEBUG */ c->cfgtable = remap_pci_mem(pci_resource_start(pdev, cfg_base_addr_index) + -- cgit v1.2.3 From b09bc6cbae4dd3a2d35722668ef2c502a7b8b093 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Fri, 14 Nov 2008 11:42:29 +0800 Subject: USB: fix SB700 usb subsystem hang bug This patch is required for AMD SB700 south bridge revision A12 and A13 to avoid USB subsystem hang symptom. The USB subsystem hang symptom is observed when the system has multiple USB devices connected to it. In some cases a USB hub may be required to observe this symptom. This patch works around the problem by correcting the internal register setting that will help by changing the behavior of the internal logic to avoid the USB subsystem hang issue. The change in the behavior of the logic does not impact the normal operation of the USB subsystem. Reported-by: Volker Armin Hemmann Tested-by: Volker Armin Hemmann Signed-off-by: Andiry Xu Signed-off-by: Libin Yang Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index c46a58f9181d..9d0ea573aef6 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -66,6 +66,8 @@ static int ehci_pci_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + struct pci_dev *p_smbus; + u8 rev; u32 temp; int retval; @@ -166,6 +168,25 @@ static int ehci_pci_setup(struct usb_hcd *hcd) pci_write_config_byte(pdev, 0x4b, tmp | 0x20); } break; + case PCI_VENDOR_ID_ATI: + /* SB700 old version has a bug in EHCI controller, + * which causes usb devices lose response in some cases. + */ + if (pdev->device == 0x4396) { + p_smbus = pci_get_device(PCI_VENDOR_ID_ATI, + PCI_DEVICE_ID_ATI_SBX00_SMBUS, + NULL); + if (!p_smbus) + break; + rev = p_smbus->revision; + if ((rev == 0x3a) || (rev == 0x3b)) { + u8 tmp; + pci_read_config_byte(pdev, 0x53, &tmp); + pci_write_config_byte(pdev, 0x53, tmp | (1<<3)); + } + pci_dev_put(p_smbus); + } + break; } ehci_reset(ehci); -- cgit v1.2.3 From aa5cbbecd903e5692b64f871c385ece1c5508eac Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 17 Nov 2008 09:08:16 +0200 Subject: usb: musb: fix bug in musb_schedule This bug was introduced recently. Fix it before bigger problems appear. Signed-off-by: Felipe Balbi Cc: Sergei Shtylyov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index e45e70bcc5e2..cc64462d4c4e 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1757,7 +1757,7 @@ static int musb_schedule( } } /* use bulk reserved ep1 if no other ep is free */ - if (best_end > 0 && qh->type == USB_ENDPOINT_XFER_BULK) { + if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) { hw_ep = musb->bulk_ep; if (is_in) head = &musb->in_bulk; -- cgit v1.2.3 From 9beba53dc5c330d781ecc0ad8ea081c2d100ff9f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 17 Nov 2008 16:12:32 -0500 Subject: USB: storage: updates unusual_devs entry for the Nokia 6300 This patch (as1169) modifies the unusual_devs entry for the Nokia 6300. According to Maciej Gierok and David McBride , the revision limits need to be wider. This fixes Bugzilla #11768. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d4e5fc86e43c..096a439baa37 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -240,7 +240,7 @@ UNUSUAL_DEV( 0x0421, 0x04b9, 0x0551, 0x0551, US_FL_FIX_CAPACITY ), /* Reported by Richard Nauber */ -UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601, +UNUSUAL_DEV( 0x0421, 0x04fa, 0x0550, 0x0660, "Nokia", "6300", US_SC_DEVICE, US_PR_DEVICE, NULL, -- cgit v1.2.3 From 589afd3bec907f02c133d7b8185b8af534f14a8e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 17 Nov 2008 14:32:16 -0500 Subject: USB: storage: update unusual_devs entries for Nokia 5300 and 5310 This patch (as1168) updates the unusual_devs entry for the Nokia 5300. According to Jorge Lucangeli Obes , some existing models have a revision number lower than the lower limit of the current entry. The patch also moves the entry for the Nokia 5310 to its correct place in the file. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 096a439baa37..6da9a7a962a8 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -167,6 +167,13 @@ UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Patch for Nokia 5310 capacity */ +UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, + "Nokia", + "5310", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Mario Rettig */ UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, "Nokia", @@ -233,7 +240,7 @@ UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, US_FL_MAX_SECTORS_64 ), /* Reported by Cedric Godin */ -UNUSUAL_DEV( 0x0421, 0x04b9, 0x0551, 0x0551, +UNUSUAL_DEV( 0x0421, 0x04b9, 0x0500, 0x0551, "Nokia", "5300", US_SC_DEVICE, US_PR_DEVICE, NULL, -- cgit v1.2.3 From 9c264521a9f836541c122b00f505cfd60cc5bbb5 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 15 Nov 2008 19:53:21 -0800 Subject: USB: gadget rndis: stop windows self-immolation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Somewhere in the conversion of the RNDIS gadget code to the new framework, the descriptor of its data interface seems to have been copied from the CDC Ethernet driver. Unfortunately that means it got a nonzero altsetting ... which is incorrect. Issue uncovered by Richard Röjfors . This patch fixes that problem, and resolves at least some cases of Windows XP bluescreening itself. Tested-by: Richard Röjfors . Signed-off-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_rndis.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 659b3d9671c4..8afb14a4a72f 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -172,7 +172,6 @@ static struct usb_interface_descriptor rndis_data_intf __initdata = { .bDescriptorType = USB_DT_INTERFACE, /* .bInterfaceNumber = DYNAMIC */ - .bAlternateSetting = 1, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, -- cgit v1.2.3 From ff3495052af48f7a2bf7961b131dc9e161dae19c Mon Sep 17 00:00:00 2001 From: Richard Röjfors Date: Sat, 15 Nov 2008 19:53:24 -0800 Subject: USB: gadget rndis: send notifications MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It turns out that atomic_inc_return() returns the *new* value not the original one, so the logic in rndis_response_available() kept the first RNDIS response notification from getting out. This prevented interoperation with MS-Windows (but not Linux). Fix this to make RNDIS behave again. Signed-off-by: Richard Röjfors Signed-off-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_rndis.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 8afb14a4a72f..428b5993575a 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -302,7 +302,7 @@ static void rndis_response_available(void *_rndis) __le32 *data = req->buf; int status; - if (atomic_inc_return(&rndis->notify_count)) + if (atomic_inc_return(&rndis->notify_count) != 1) return; /* Send RNDIS RESPONSE_AVAILABLE notification; a -- cgit v1.2.3 From f1c0a2a3aff53698f4855968d576464041d49b39 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Fri, 14 Nov 2008 09:47:41 -0700 Subject: USB: usbmon: fix read(2) There's a bug in the usbmon binary reader: When using read() to fetch the packets and a packet's data is partially read, the next read call will once again return up to len_cap bytes of data. The b_read counter is not regarded when determining the remaining chunk size. So, when dumping USB data with "cat /dev/usbmon0 > usbmon.trace" while reading from a USB storage device and analyzing the dump file afterwards it will get out of sync after a couple of packets. Signed-off-by: Ingo van Lil Signed-off-by: Pete Zaitcev Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mon/mon_bin.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index c9de3f027aab..e06810aef2df 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -687,7 +687,10 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf, } if (rp->b_read >= sizeof(struct mon_bin_hdr)) { - step_len = min(nbytes, (size_t)ep->len_cap); + step_len = ep->len_cap; + step_len -= rp->b_read - sizeof(struct mon_bin_hdr); + if (step_len > nbytes) + step_len = nbytes; offset = rp->b_out + PKT_SIZE; offset += rp->b_read - sizeof(struct mon_bin_hdr); if (offset >= rp->b_size) -- cgit v1.2.3 From 5091b58751d9bf51e92aa9e07f3332dcacc2af1c Mon Sep 17 00:00:00 2001 From: M Kondrin Date: Fri, 14 Nov 2008 13:02:45 +0300 Subject: USB: ACE1001 patch for cp2101.c The patch which adds IDs for AKTAKOM USB->RS232 cable (http://www.aktakom.ru/product/kio/ace-1001.htm) is attached. From: M Kondrin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 9035d7256b03..cfaf1f085535 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -56,6 +56,7 @@ static void cp2101_shutdown(struct usb_serial *); static int debug; static struct usb_device_id id_table [] = { + { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ -- cgit v1.2.3 From a134f85c131ffd56720e38af2967ec6265480757 Mon Sep 17 00:00:00 2001 From: Balazs Scheidler Date: Thu, 20 Nov 2008 01:07:24 -0800 Subject: TPROXY: fill struct flowi->flags in udp_sendmsg() udp_sendmsg() didn't fill struct flowi->flags, which means that the route lookup would fail for non-local IPs even if the IP_TRANSPARENT sockopt was set. This prevents sendto() to work properly for UDP sockets, whereas bind(foreign-ip) + connect() + send() worked fine. Signed-off-by: Balazs Scheidler Signed-off-by: David S. Miller --- net/ipv4/udp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index cf02701ced48..98c1fd09be88 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -633,6 +633,7 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, .saddr = saddr, .tos = tos } }, .proto = sk->sk_protocol, + .flags = inet_sk_flowi_flags(sk), .uli_u = { .ports = { .sport = inet->sport, .dport = dport } } }; -- cgit v1.2.3 From c82838458200ec4167ce7083b0a17474150c5bf7 Mon Sep 17 00:00:00 2001 From: Balazs Scheidler Date: Thu, 20 Nov 2008 01:08:06 -0800 Subject: TPROXY: supply a struct flowi->flags argument in inet_sk_rebuild_header() inet_sk_rebuild_header() does a new route lookup if the dst_entry associated with a socket becomes stale. However inet_sk_rebuild_header() didn't use struct flowi->flags, causing the route lookup to fail for foreign-bound IP_TRANSPARENT sockets, causing an error state to be set for the sockets in question. Signed-off-by: Balazs Scheidler Signed-off-by: David S. Miller --- net/ipv4/af_inet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 1fbff5fa4241..1aa2dc9e380e 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1117,6 +1117,7 @@ int inet_sk_rebuild_header(struct sock *sk) }, }, .proto = sk->sk_protocol, + .flags = inet_sk_flowi_flags(sk), .uli_u = { .ports = { .sport = inet->sport, -- cgit v1.2.3 From fb5e2f9b9410a4362897d12dc1ed4f7cec1b0d45 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 17 Nov 2008 20:29:58 +0000 Subject: sh: sh_eth: Update to change of mii_bus Update to change of mii_bus interface and fix some warning. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: David S. Miller --- drivers/net/sh_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index a24bb68887ab..59f242a67714 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -927,7 +927,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev) struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_txdesc *txdesc; u32 entry; - int flags; + unsigned long flags; spin_lock_irqsave(&mdp->lock, flags); if ((mdp->cur_tx - mdp->dirty_tx) >= (TX_RING_SIZE - 4)) { @@ -1141,7 +1141,7 @@ static int sh_mdio_init(struct net_device *ndev, int id) /* Hook up MII support for ethtool */ mdp->mii_bus->name = "sh_mii"; mdp->mii_bus->parent = &ndev->dev; - mdp->mii_bus->id[0] = id; + snprintf(mdp->mii_bus->id, MII_BUS_ID_SIZE, "%x", id); /* PHY IRQ */ mdp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL); -- cgit v1.2.3 From bcb3336ce4354395e38df7e2da110fca61f86a84 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 18 Nov 2008 04:28:35 +0000 Subject: mv643xx_eth: fix the order of mdiobus_{unregister, free}() calls Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b9dcdbd369f8..baa7e845a011 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2435,8 +2435,8 @@ static int mv643xx_eth_shared_remove(struct platform_device *pdev) struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data; if (pd == NULL || pd->shared_smi == NULL) { - mdiobus_free(msp->smi_bus); mdiobus_unregister(msp->smi_bus); + mdiobus_free(msp->smi_bus); } if (msp->err_interrupt != NO_IRQ) free_irq(msp->err_interrupt, msp); -- cgit v1.2.3 From 11b4aa03b212cbaa969df25e723fbd400a6e24b9 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 18 Nov 2008 04:28:58 +0000 Subject: mv643xx_eth: fix recycle check bound When mv643xx_eth allocates skbuffs, it adds 'dma_get_cache_alignment() - 1' to the length it needs, so that it can align the skb's ->data pointer to a cache boundary. When checking whether a transmitted skbuff can be reused as a receive buffer, these bytes needs to be included into the minimum bound for the recycle check. Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index baa7e845a011..e513f76f2a9f 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -899,7 +899,8 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) if (skb != NULL) { if (skb_queue_len(&mp->rx_recycle) < mp->default_rx_ring_size && - skb_recycle_check(skb, mp->skb_size)) + skb_recycle_check(skb, mp->skb_size + + dma_get_cache_alignment() - 1)) __skb_queue_head(&mp->rx_recycle, skb); else dev_kfree_skb(skb); -- cgit v1.2.3 From a7f75c0c9cfb628512b30795bcba02c8a97e03a0 Mon Sep 17 00:00:00 2001 From: Pantelis Koukousoulas Date: Thu, 20 Nov 2008 01:48:46 -0800 Subject: asix: Fix asix-based cards connecting to 10/100Mbs LAN. Add AX_MEDIUM_ENCK also when speed = 10/100Mbps. This allows my belkin f5d5055 to work with my 100Mbps switch and with an old 10Mbps ISA card. Without this patch, the card is recognized and the interface is brought up fine, but no packets actually flow through the interface. Signed-off-by: Pantelis Koukousoulas Acked-by: David Hollis Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index e12cdb4543b4..de57490103fc 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1102,12 +1102,14 @@ static int ax88178_link_reset(struct usbnet *dev) mode = AX88178_MEDIUM_DEFAULT; if (ecmd.speed == SPEED_1000) - mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK; + mode |= AX_MEDIUM_GM; else if (ecmd.speed == SPEED_100) mode |= AX_MEDIUM_PS; else mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM); + mode |= AX_MEDIUM_ENCK; + if (ecmd.duplex == DUPLEX_FULL) mode |= AX_MEDIUM_FD; else -- cgit v1.2.3 From eafdcb433f854c8cb06747a80fa3df7c72147be6 Mon Sep 17 00:00:00 2001 From: Vernon Sauder Date: Thu, 20 Nov 2008 01:56:08 -0800 Subject: smc911x: Fix printf format typo in smc911x driver. Signed-off-by: Vernon Sauder Signed-off-by: David S. Miller --- drivers/net/smc911x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 1f26ab0e7986..b185cd12269c 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -1813,7 +1813,7 @@ static int __init smc911x_probe(struct net_device *dev) val = SMC_GET_BYTE_TEST(lp); DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val); if (val != 0x87654321) { - printk(KERN_ERR "Invalid chip endian 0x08%x\n",val); + printk(KERN_ERR "Invalid chip endian 0x%08x\n",val); retval = -ENODEV; goto err_out; } -- cgit v1.2.3 From 06d2148ed3b3fa997fa5a848f6405709c464b3ba Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 20 Nov 2008 11:22:17 +0100 Subject: HID: unignore mouse on unibody macbooks In commit a96d6ef34, the mouse interfaces on the unibody macbooks were put into hid mouse ignore list. This was a little bit too premature though, as the corresponding bcm5974 changes are scheduled for 2.6.29. Remove these devices from the ignore list for now, in order to provide at least basic functionality with the HID driver. Will be reintroduced in 2.6.29 Reported-by: Henrik Rydberg Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 69b1ce800f72..5000711999e8 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1576,9 +1576,6 @@ static const struct hid_device_id hid_mouse_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { } -- cgit v1.2.3 From 3aa4614da741f10b09559a5675c79e2eff5cccd8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 20 Nov 2008 04:07:14 -0800 Subject: pkt_sched: fix missing check for packet overrun in qdisc_dump_stab() nla_nest_start() might return NULL, causing a NULL pointer dereference. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/sched/sch_api.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index b16ad2972c6b..6ab4a2f92ca0 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -417,6 +417,8 @@ static int qdisc_dump_stab(struct sk_buff *skb, struct qdisc_size_table *stab) struct nlattr *nest; nest = nla_nest_start(skb, TCA_STAB); + if (nest == NULL) + goto nla_put_failure; NLA_PUT(skb, TCA_STAB_BASE, sizeof(stab->szopts), &stab->szopts); nla_nest_end(skb, nest); -- cgit v1.2.3 From eedd726efbc439dbed94fb8577e5533a986b341f Mon Sep 17 00:00:00 2001 From: Benjamin Thery Date: Thu, 20 Nov 2008 04:16:12 -0800 Subject: ipv6: use seq_release_private for ip6mr.c /proc entries In ip6mr.c, /proc entries /proc/net/ip6_mr_cache and /proc/net/ip6_mr_vif are opened with seq_open_private(), thus seq_release_private() should be used to release them. Should fix a small memory leak. Signed-off-by: Benjamin Thery Signed-off-by: David S. Miller --- net/ipv6/ip6mr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 52a7eb0e2c2c..0524769632e7 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -224,7 +224,7 @@ static struct file_operations ip6mr_vif_fops = { .open = ip6mr_vif_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = seq_release_private, }; static void *ipmr_mfc_seq_start(struct seq_file *seq, loff_t *pos) @@ -338,7 +338,7 @@ static struct file_operations ip6mr_mfc_fops = { .open = ipmr_mfc_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = seq_release_private, }; #endif -- cgit v1.2.3 From a849854fc7e200d5e5a437dec9c1d0e8b105e50f Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Thu, 20 Nov 2008 04:18:25 -0800 Subject: atl2: don't request irq on resume if netif running If the device is suspended with the cable disconnected, then resumed with the cable connected, dev->open is called before resume. During resume, we request an IRQ, but the IRQ was already assigned during dev->open, resulting in the warning shown below. Don't request an IRQ if the device is running. Call Trace: [] warn_on_slowpath+0x40/0x59 [] raw_pci_read+0x4d/0x55 [] pci_read+0x1c/0x21 [] __pci_find_next_cap_ttl+0x44/0x70 [] __pci_find_next_cap+0x1a/0x1f [] pci_find_capability+0x28/0x2c [] pci_msi_check_device+0x53/0x62 [] pci_enable_msi+0x3a/0x1cd [] atl2_write_phy_reg+0x40/0x5f [atl2] [] dma_generic_alloc_coherent+0x0/0xd7 [] atl2_request_irq+0x15/0x49 [atl2] [] atl2_open+0x20b/0x297 [atl2] [] dev_open+0x62/0x91 [] dev_change_flags+0x93/0x141 [] do_setlink+0x238/0x2d5 [] rtnl_setlink+0xa9/0xbf [] mutex_lock+0xb/0x19 [] rtnl_dump_ifinfo+0x0/0x69 [] rtnl_setlink+0x0/0xbf [] rtnetlink_rcv_msg+0x185/0x19f [] sock_rmalloc+0x23/0x57 [] rtnetlink_rcv_msg+0x0/0x19f [] netlink_rcv_skb+0x2d/0x71 [] rtnetlink_rcv+0x14/0x1a [] netlink_unicast+0x184/0x1e4 [] netlink_sendmsg+0x233/0x240 [] sock_sendmsg+0xb7/0xd0 [] autoremove_wake_function+0x0/0x2b [] autoremove_wake_function+0x0/0x2b [] mempool_alloc+0x2d/0x9e [] scsi_pool_alloc_command+0x35/0x4f [] mutex_lock+0xb/0x19 [] unix_stream_recvmsg+0x357/0x3e2 [] copy_from_user+0x23/0x4f [] verify_iovec+0x3e/0x6c [] sys_sendmsg+0x18d/0x1f0 [] sys_recvmsg+0x146/0x1c8 [] sys_recvmsg+0x1b4/0x1c8 [] __wake_up+0xf/0x15 [] netlink_table_ungrab+0x17/0x19 [] copy_to_user+0x25/0x3b [] move_addr_to_user+0x50/0x68 [] sys_getsockname+0x6f/0x9a [] sys_getsockname+0x89/0x9a [] do_wp_page+0x3ae/0x41a [] handle_mm_fault+0x4c5/0x540 [] sys_socketcall+0x176/0x1b0 [] sysenter_do_call+0x12/0x21 Signed-off-by: Alan Jenkins Signed-off-by: Jay Cliburn Signed-off-by: David S. Miller --- drivers/net/atlx/atl2.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c index f5bdc92c1a65..8571e8c0bc67 100644 --- a/drivers/net/atlx/atl2.c +++ b/drivers/net/atlx/atl2.c @@ -1690,9 +1690,11 @@ static int atl2_resume(struct pci_dev *pdev) ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); - err = atl2_request_irq(adapter); - if (netif_running(netdev) && err) - return err; + if (netif_running(netdev)) { + err = atl2_request_irq(adapter); + if (err) + return err; + } atl2_reset_hw(&adapter->hw); -- cgit v1.2.3 From 5ece6c2ddd6f7da9e95dc325c742c0f5afbcecbe Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 20 Nov 2008 04:20:10 -0800 Subject: net: fix tiny output corruption of /proc/net/snmp6 Because "name" is static, it can be occasionally be filled with somewhat garbage if two processes read /proc/net/snmp6. Also, remove useless casts and "-1" -- snprintf() correctly terminates it's output. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/ipv6/proc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index 07f0b76e7427..97c17fdd6f75 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -132,7 +132,7 @@ static struct snmp_mib snmp6_udplite6_list[] = { static void snmp6_seq_show_icmpv6msg(struct seq_file *seq, void **mib) { - static char name[32]; + char name[32]; int i; /* print by name -- deprecated items */ @@ -144,7 +144,7 @@ static void snmp6_seq_show_icmpv6msg(struct seq_file *seq, void **mib) p = icmp6type2name[icmptype]; if (!p) /* don't print un-named types here */ continue; - (void) snprintf(name, sizeof(name)-1, "Icmp6%s%s", + snprintf(name, sizeof(name), "Icmp6%s%s", i & 0x100 ? "Out" : "In", p); seq_printf(seq, "%-32s\t%lu\n", name, snmp_fold_field(mib, i)); @@ -157,7 +157,7 @@ static void snmp6_seq_show_icmpv6msg(struct seq_file *seq, void **mib) val = snmp_fold_field(mib, i); if (!val) continue; - (void) snprintf(name, sizeof(name)-1, "Icmp6%sType%u", + snprintf(name, sizeof(name), "Icmp6%sType%u", i & 0x100 ? "Out" : "In", i & 0xff); seq_printf(seq, "%-32s\t%lu\n", name, val); } -- cgit v1.2.3 From 578f3a35fecabff49bad808c5301313f785b5462 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 20 Nov 2008 15:55:38 +0100 Subject: HID: add USB ID for another dual gameron adapter 0x0810/0x0002 needs the very same handling as 0x0001. Reported-by: Steve Conklin Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + drivers/hid/hid-pl.c | 2 ++ 3 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 5000711999e8..026a46333fda 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1267,6 +1267,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index d70075dd3d81..39289699c32f 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -163,6 +163,7 @@ #define USB_VENDOR_ID_GAMERON 0x0810 #define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001 +#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002 #define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc diff --git a/drivers/hid/hid-pl.c b/drivers/hid/hid-pl.c index acd815586182..46941f979b9d 100644 --- a/drivers/hid/hid-pl.c +++ b/drivers/hid/hid-pl.c @@ -178,6 +178,8 @@ err: static const struct hid_device_id pl_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR), .driver_data = 1 }, /* Twin USB Joystick */ + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR), + .driver_data = 1 }, /* Twin USB Joystick */ { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), }, /* GreenAsia Inc. USB Joystick */ { } }; -- cgit v1.2.3 From 9bc646f163b136684390081262fab0fd8f5343ca Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Thu, 20 Nov 2008 19:08:45 +0600 Subject: x86: fix __cpuinit/__init tangle in init_thread_xstate() Impact: fix incorrect __init annotation This patch removes the following section mismatch warning. A patch set was send previously (http://lkml.org/lkml/2008/11/10/407). But introduce some other problem, reported by Rufus (http://lkml.org/lkml/2008/11/11/46). Then Ingo Molnar suggest that, it's best to remove __init from xsave_cntxt_init(void). Which is the second patch in this series. Now, this one removes the following warning. WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x2237): Section mismatch in reference from the function cpu_init() to the function .init.text:init_thread_xstate() The function __cpuinit cpu_init() references a function __init init_thread_xstate(). If init_thread_xstate is only used by cpu_init then annotate init_thread_xstate with a matching annotation. Signed-off-by: Rakib Mullick Signed-off-by: Ingo Molnar --- arch/x86/kernel/i387.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 1f20608d4ca8..b0f61f0dcd0a 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -58,7 +58,7 @@ void __cpuinit mxcsr_feature_mask_init(void) stts(); } -void __init init_thread_xstate(void) +void __cpuinit init_thread_xstate(void) { if (!HAVE_HWFP) { xstate_size = sizeof(struct i387_soft_struct); -- cgit v1.2.3 From bfe085f62f98a49e1b864e4950389c7205174e4f Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Thu, 20 Nov 2008 19:12:50 +0600 Subject: x86: fixing __cpuinit/__init tangle, xsave_cntxt_init() Annotate xsave_cntxt_init() as "can be called outside of __init". Signed-off-by: Rakib Mullick Signed-off-by: Ingo Molnar --- arch/x86/kernel/xsave.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index b13acb75e822..15c3e6999182 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -310,7 +310,7 @@ static void __init setup_xstate_init(void) /* * Enable and initialize the xsave feature. */ -void __init xsave_cntxt_init(void) +void __ref xsave_cntxt_init(void) { unsigned int eax, ebx, ecx, edx; -- cgit v1.2.3 From 0253fdcd8aec2f954c2950a7454c0a2f3207e9a1 Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Sun, 16 Nov 2008 11:42:34 -0500 Subject: ALSA: hda: STAC_DELL_M6 EAPD Add support for EAPD on system suspend and disabling EAPD on headphone jack detection for STAC_DELL_M6 laptops. This patch fixes the regressions, the silent output on HP of some Dell laptops (see Novell bnc#446025): https://bugzilla.novell.com/show_bug.cgi?id=446025 Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 9563b5bbb272..31a234afe1af 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -137,6 +137,7 @@ struct sigmatel_spec { unsigned int num_mixers; int board_config; + unsigned int eapd_switch: 1; unsigned int surr_switch: 1; unsigned int line_switch: 1; unsigned int mic_switch: 1; @@ -3901,7 +3902,7 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) for (i = 0; i < cfg->speaker_outs; i++) stac92xx_reset_pinctl(codec, cfg->speaker_pins[i], AC_PINCTL_OUT_EN); - if (spec->eapd_mask) + if (spec->eapd_mask && spec->eapd_switch) stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data & ~spec->eapd_mask); @@ -3916,7 +3917,7 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) for (i = 0; i < cfg->speaker_outs; i++) stac92xx_set_pinctl(codec, cfg->speaker_pins[i], AC_PINCTL_OUT_EN); - if (spec->eapd_mask) + if (spec->eapd_mask && spec->eapd_switch) stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data | spec->eapd_mask); @@ -4243,6 +4244,7 @@ again: spec->num_smuxes = 0; spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER]; spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP]; + spec->eapd_switch = 0; spec->num_amps = 1; if (!spec->init) @@ -4274,6 +4276,7 @@ again: default: spec->num_dmics = STAC92HD73XX_NUM_DMICS; spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids); + spec->eapd_switch = 1; } if (spec->board_config > STAC_92HD73XX_REF) { /* GPIO0 High = Enable EAPD */ @@ -4419,7 +4422,13 @@ static int stac92hd71xx_resume(struct hda_codec *codec) static int stac92hd71xx_suspend(struct hda_codec *codec, pm_message_t state) { + struct sigmatel_spec *spec = codec->spec; + stac92hd71xx_set_power_state(codec, AC_PWRST_D3); + if (spec->eapd_mask) + stac_gpio_set(codec, spec->gpio_mask, + spec->gpio_dir, spec->gpio_data & + ~spec->eapd_mask); return 0; }; @@ -4806,6 +4815,7 @@ static int patch_stac927x(struct hda_codec *codec) spec->num_pwrs = 0; spec->aloopback_mask = 0x40; spec->aloopback_shift = 0; + spec->eapd_switch = 1; err = stac92xx_parse_auto_config(codec, 0x1e, 0x20); if (!err) { @@ -4886,6 +4896,7 @@ static int patch_stac9205(struct hda_codec *codec) spec->aloopback_mask = 0x40; spec->aloopback_shift = 0; + spec->eapd_switch = 1; spec->multiout.dac_nids = spec->dac_nids; switch (spec->board_config){ -- cgit v1.2.3 From 625ff1679456d8adb9af0c980394ea3954e727a8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 18 Nov 2008 10:23:19 -0300 Subject: V4L/DVB (9645): em28xx: Avoid memory leaks if registration fails em28xx_init_dev() has some error conditions that are not properly de-allocating dev var, nor freeing the device number for a future usage. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index a1ab2ef45578..bca5955339b8 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1953,8 +1953,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, errCode = em28xx_config(dev); if (errCode) { em28xx_errdev("error configuring device\n"); - em28xx_devused &= ~(1<devno); - kfree(dev); return -ENOMEM; } @@ -2088,7 +2086,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, fail_unreg: em28xx_release_resources(dev); mutex_unlock(&dev->lock); - kfree(dev); return retval; } @@ -2231,8 +2228,12 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* allocate device struct */ retval = em28xx_init_dev(&dev, udev, nr); - if (retval) + if (retval) { + em28xx_devused &= ~(1<devno); + kfree(dev); + return retval; + } em28xx_info("Found %s\n", em28xx_boards[dev->model].name); -- cgit v1.2.3 From c4a98793a63c423c9e1af51822325969e23c16d4 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 18 Nov 2008 14:51:08 -0300 Subject: V4L/DVB (9646): em28xx: avoid allocating/dealocating memory on every control urb Before this patch, every register setup on em28xx were dynamically allocating a temporary buffer for control URB's to be handled. To avoid this ping-pong, use, instead a pre-allocated buffer. Also, be sure that read control URB's also use the buffer, instead of relying on a stack buffer. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-core.c | 48 +++++++++++++++++--------------- drivers/media/video/em28xx/em28xx.h | 5 ++++ 2 files changed, 31 insertions(+), 22 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 038da614a734..9551b8ab8c44 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -69,19 +69,29 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg, int ret, byte; if (dev->state & DEV_DISCONNECTED) - return(-ENODEV); + return -ENODEV; + + if (len > URB_MAX_CTRL_SIZE) + return -EINVAL; em28xx_regdbg("req=%02x, reg=%02x ", req, reg); ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0000, reg, buf, len, HZ); + 0x0000, reg, dev->urb_buf, len, HZ); + if (ret < 0) { + if (reg_debug) + printk(" failed!\n"); + return ret; + } + + if (len) + memcpy(buf, dev->urb_buf, len); if (reg_debug) { - printk(ret < 0 ? " failed!\n" : "%02x values: ", ret); + printk("%02x values: ", ret); for (byte = 0; byte < len; byte++) printk(" %02x", (unsigned char)buf[byte]); - printk("\n"); } @@ -104,14 +114,16 @@ int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg) ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0000, reg, &val, 1, HZ); + 0x0000, reg, dev->urb_buf, 1, HZ); + if (ret < 0) { + printk(" failed!\n"); + return ret; + } - if (reg_debug) - printk(ret < 0 ? " failed!\n" : - "%02x\n", (unsigned char) val); + val = dev->urb_buf[0]; - if (ret < 0) - return ret; + if (reg_debug) + printk("%02x\n", (unsigned char) val); return val; } @@ -130,19 +142,13 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, { int ret; - /*usb_control_msg seems to expect a kmalloced buffer */ - unsigned char *bufs; - if (dev->state & DEV_DISCONNECTED) return -ENODEV; - if (len < 1) + if ((len < 1) || (len > URB_MAX_CTRL_SIZE)) return -EINVAL; - bufs = kmalloc(len, GFP_KERNEL); - em28xx_regdbg("req=%02x reg=%02x:", req, reg); - if (reg_debug) { int i; for (i = 0; i < len; ++i) @@ -150,16 +156,14 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, printk("\n"); } - if (!bufs) - return -ENOMEM; - memcpy(bufs, buf, len); + memcpy(dev->urb_buf, buf, len); ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0000, reg, bufs, len, HZ); + 0x0000, reg, dev->urb_buf, len, HZ); + if (dev->wait_after_write) msleep(dev->wait_after_write); - kfree(bufs); return ret; } diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 82781178e0a3..1adf3d9d9bff 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -102,6 +102,9 @@ #define EM28XX_MIN_BUF 4 #define EM28XX_DEF_BUF 8 +/*Limits the max URB message size */ +#define URB_MAX_CTRL_SIZE 80 + /* Params for validated field */ #define EM28XX_BOARD_NOT_VALIDATED 1 #define EM28XX_BOARD_VALIDATED 0 @@ -451,6 +454,8 @@ struct em28xx { unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */ struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */ char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */ + char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */ + /* helper funcs that call usb_control_msg */ int (*em28xx_write_regs) (struct em28xx *dev, u16 reg, char *buf, int len); -- cgit v1.2.3 From f2a2e4910502e866833732f31ee697d15b3e56fd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 19 Nov 2008 06:17:44 -0300 Subject: V4L/DVB (9647): em28xx: void having two concurrent control URB's Now that we have a polling task for IR, there's a race condition, since IR can be polling while other operations are being doing. Also, we are now sharing the same urb_buf for both read and write control urb operations. So, we need a mutex. Thanks to Davin Heitmueller for warning me. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-core.c | 12 ++++++++++-- drivers/media/video/em28xx/em28xx-video.c | 1 + drivers/media/video/em28xx/em28xx.h | 1 + 3 files changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 9551b8ab8c44..15e2b525310d 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -76,18 +76,22 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg, em28xx_regdbg("req=%02x, reg=%02x ", req, reg); + mutex_lock(&dev->ctrl_urb_lock); ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0000, reg, dev->urb_buf, len, HZ); if (ret < 0) { if (reg_debug) printk(" failed!\n"); + mutex_unlock(&dev->ctrl_urb_lock); return ret; } if (len) memcpy(buf, dev->urb_buf, len); + mutex_unlock(&dev->ctrl_urb_lock); + if (reg_debug) { printk("%02x values: ", ret); for (byte = 0; byte < len; byte++) @@ -112,16 +116,18 @@ int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg) em28xx_regdbg("req=%02x, reg=%02x:", req, reg); + mutex_lock(&dev->ctrl_urb_lock); ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0000, reg, dev->urb_buf, 1, HZ); + val = dev->urb_buf[0]; + mutex_unlock(&dev->ctrl_urb_lock); + if (ret < 0) { printk(" failed!\n"); return ret; } - val = dev->urb_buf[0]; - if (reg_debug) printk("%02x\n", (unsigned char) val); @@ -156,10 +162,12 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, printk("\n"); } + mutex_lock(&dev->ctrl_urb_lock); memcpy(dev->urb_buf, buf, len); ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0000, reg, dev->urb_buf, len, HZ); + mutex_unlock(&dev->ctrl_urb_lock); if (dev->wait_after_write) msleep(dev->wait_after_write); diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index bca5955339b8..c32fc7d24a42 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1936,6 +1936,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->udev = udev; mutex_init(&dev->lock); + mutex_init(&dev->ctrl_urb_lock); spin_lock_init(&dev->slock); init_waitqueue_head(&dev->open); init_waitqueue_head(&dev->wait_frame); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 1adf3d9d9bff..5956e9b3062f 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -433,6 +433,7 @@ struct em28xx { /* locks */ struct mutex lock; + struct mutex ctrl_urb_lock; /* protects urb_buf */ /* spinlock_t queue_lock; */ struct list_head inqueue, outqueue; wait_queue_head_t open, wait_frame, wait_stream; -- cgit v1.2.3 From 9e86786a4b17ad186f456dc6ac0508a17556731b Mon Sep 17 00:00:00 2001 From: David Daney Date: Sat, 20 Sep 2008 10:16:36 -0700 Subject: MIPS: Malta: Fix include paths in malta-amon.c On linux-queue, malta doesn't build after the include file relocation. This should fix it. There some occurrences of 'asm-mips' in the comments of quite a few files, but this is the only place I found it in any code. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-amon.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/mti-malta/malta-amon.c b/arch/mips/mti-malta/malta-amon.c index 96236bf33838..df9e526312a2 100644 --- a/arch/mips/mti-malta/malta-amon.c +++ b/arch/mips/mti-malta/malta-amon.c @@ -22,9 +22,9 @@ #include #include -#include -#include -#include +#include +#include +#include int amon_cpu_avail(int cpu) { -- cgit v1.2.3 From 1b432840d0a4740020e29ae7a00717ef8f44954b Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 31 Oct 2008 14:24:29 +0100 Subject: MIPS: RB532: GPIO register offsets are relative to GPIOBASE This patch fixes the wrong use of GPIO register offsets in devices.c. To avoid further problems, use gpio_get_value to return the NAND status instead of our own expanded code. Also define the zero offset of the alternate function register to allow consistent access. Signed-off-by: Florian Fainelli Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-rc32434/rb.h | 14 ++++++++------ arch/mips/rb532/devices.c | 2 +- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h index 79e8ef67d0d3..f25a84916703 100644 --- a/arch/mips/include/asm/mach-rc32434/rb.h +++ b/arch/mips/include/asm/mach-rc32434/rb.h @@ -40,12 +40,14 @@ #define BTCS 0x010040 #define BTCOMPARE 0x010044 #define GPIOBASE 0x050000 -#define GPIOCFG 0x050004 -#define GPIOD 0x050008 -#define GPIOILEVEL 0x05000C -#define GPIOISTAT 0x050010 -#define GPIONMIEN 0x050014 -#define IMASK6 0x038038 +/* Offsets relative to GPIOBASE */ +#define GPIOFUNC 0x00 +#define GPIOCFG 0x04 +#define GPIOD 0x08 +#define GPIOILEVEL 0x0C +#define GPIOISTAT 0x10 +#define GPIONMIEN 0x14 +#define IMASK6 0x38 #define LO_WPX (1 << 0) #define LO_ALE (1 << 1) #define LO_CLE (1 << 2) diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 2f22d714d5b0..c1c29181bd46 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -118,7 +118,7 @@ static struct platform_device cf_slot0 = { /* Resources and device for NAND */ static int rb532_dev_ready(struct mtd_info *mtd) { - return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY; + return gpio_get_value(GPIO_RDY); } static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -- cgit v1.2.3 From f43909dfb39c63ce54a598cbd7921643029afdeb Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Fri, 31 Oct 2008 19:54:11 +0200 Subject: MIPS: IP22: Make indy_sc_ops variable static The indy_sc_ops variable in arch/mips/mm/sc-ip22.c is needlessly defined global, and this patch makes it static. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- --- arch/mips/mm/sc-ip22.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mm/sc-ip22.c b/arch/mips/mm/sc-ip22.c index 1f602a110e10..13adb5782110 100644 --- a/arch/mips/mm/sc-ip22.c +++ b/arch/mips/mm/sc-ip22.c @@ -161,7 +161,7 @@ static inline int __init indy_sc_probe(void) /* XXX Check with wje if the Indy caches can differenciate between writeback + invalidate and just invalidate. */ -struct bcache_ops indy_sc_ops = { +static struct bcache_ops indy_sc_ops = { .bc_enable = indy_sc_enable, .bc_disable = indy_sc_disable, .bc_wback_inv = indy_sc_wback_invalidate, -- cgit v1.2.3 From 2e373952cc893207a8b47a5e68c2f5155f912449 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Sat, 1 Nov 2008 15:13:21 +0100 Subject: MIPS: RB532: Provide functions for gpio configuration As gpiolib doesn't support pin multiplexing, it provides no way to access the GPIOFUNC register. Also there is no support for setting interrupt status and level. These functions provide access to them and are needed by the CompactFlash driver. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-rc32434/gpio.h | 2 + arch/mips/rb532/gpio.c | 193 +++++++++++------------------- 2 files changed, 75 insertions(+), 120 deletions(-) diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h index c8e554eafce3..b5cf6457305a 100644 --- a/arch/mips/include/asm/mach-rc32434/gpio.h +++ b/arch/mips/include/asm/mach-rc32434/gpio.h @@ -84,5 +84,7 @@ extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned extern unsigned get_434_reg(unsigned reg_offs); extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); extern unsigned char get_latch_u5(void); +extern void rb532_gpio_set_ilevel(int bit, unsigned gpio); +extern void rb532_gpio_set_istat(int bit, unsigned gpio); #endif /* _RC32434_GPIO_H_ */ diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 70c4a6726377..0e84c8ab6a39 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -39,10 +39,6 @@ struct rb532_gpio_chip { struct gpio_chip chip; void __iomem *regbase; - void (*set_int_level)(struct gpio_chip *chip, unsigned offset, int value); - int (*get_int_level)(struct gpio_chip *chip, unsigned offset); - void (*set_int_status)(struct gpio_chip *chip, unsigned offset, int value); - int (*get_int_status)(struct gpio_chip *chip, unsigned offset); }; struct mpmc_device dev3; @@ -111,15 +107,47 @@ unsigned char get_latch_u5(void) } EXPORT_SYMBOL(get_latch_u5); +/* rb532_set_bit - sanely set a bit + * + * bitval: new value for the bit + * offset: bit index in the 4 byte address range + * ioaddr: 4 byte aligned address being altered + */ +static inline void rb532_set_bit(unsigned bitval, + unsigned offset, void __iomem *ioaddr) +{ + unsigned long flags; + u32 val; + + bitval = !!bitval; /* map parameter to {0,1} */ + + local_irq_save(flags); + + val = readl(ioaddr); + val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */ + val |= ( bitval << offset ); /* set bit if bitval == 1 */ + writel(val, ioaddr); + + local_irq_restore(flags); +} + +/* rb532_get_bit - read a bit + * + * returns the boolean state of the bit, which may be > 1 + */ +static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr) +{ + return (readl(ioaddr) & (1 << offset)); +} + /* * Return GPIO level */ static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset) { - u32 mask = 1 << offset; struct rb532_gpio_chip *gpch; gpch = container_of(chip, struct rb532_gpio_chip, chip); - return readl(gpch->regbase + GPIOD) & mask; + return rb532_get_bit(offset, gpch->regbase + GPIOD); } /* @@ -128,23 +156,10 @@ static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset) static void rb532_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { - unsigned long flags; - u32 mask = 1 << offset; - u32 tmp; struct rb532_gpio_chip *gpch; - void __iomem *gpvr; gpch = container_of(chip, struct rb532_gpio_chip, chip); - gpvr = gpch->regbase + GPIOD; - - local_irq_save(flags); - tmp = readl(gpvr); - if (value) - tmp |= mask; - else - tmp &= ~mask; - writel(tmp, gpvr); - local_irq_restore(flags); + rb532_set_bit(value, offset, gpch->regbase + GPIOD); } /* @@ -152,21 +167,14 @@ static void rb532_gpio_set(struct gpio_chip *chip, */ static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { - unsigned long flags; - u32 mask = 1 << offset; - u32 value; struct rb532_gpio_chip *gpch; - void __iomem *gpdr; gpch = container_of(chip, struct rb532_gpio_chip, chip); - gpdr = gpch->regbase + GPIOCFG; - local_irq_save(flags); - value = readl(gpdr); - value &= ~mask; - writel(value, gpdr); - local_irq_restore(flags); + if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC)) + return 1; /* alternate function, GPIOCFG is ignored */ + rb532_set_bit(0, offset, gpch->regbase + GPIOCFG); return 0; } @@ -176,117 +184,60 @@ static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset) static int rb532_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) { - unsigned long flags; - u32 mask = 1 << offset; - u32 tmp; struct rb532_gpio_chip *gpch; - void __iomem *gpdr; gpch = container_of(chip, struct rb532_gpio_chip, chip); - writel(mask, gpch->regbase + GPIOD); - gpdr = gpch->regbase + GPIOCFG; - local_irq_save(flags); - tmp = readl(gpdr); - tmp |= mask; - writel(tmp, gpdr); - local_irq_restore(flags); + if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC)) + return 1; /* alternate function, GPIOCFG is ignored */ + /* set the initial output value */ + rb532_set_bit(value, offset, gpch->regbase + GPIOD); + + rb532_set_bit(1, offset, gpch->regbase + GPIOCFG); return 0; } -/* - * Set the GPIO interrupt level - */ -static void rb532_gpio_set_int_level(struct gpio_chip *chip, - unsigned offset, int value) -{ - unsigned long flags; - u32 mask = 1 << offset; - u32 tmp; - struct rb532_gpio_chip *gpch; - void __iomem *gpil; - - gpch = container_of(chip, struct rb532_gpio_chip, chip); - gpil = gpch->regbase + GPIOILEVEL; - - local_irq_save(flags); - tmp = readl(gpil); - if (value) - tmp |= mask; - else - tmp &= ~mask; - writel(tmp, gpil); - local_irq_restore(flags); -} +static struct rb532_gpio_chip rb532_gpio_chip[] = { + [0] = { + .chip = { + .label = "gpio0", + .direction_input = rb532_gpio_direction_input, + .direction_output = rb532_gpio_direction_output, + .get = rb532_gpio_get, + .set = rb532_gpio_set, + .base = 0, + .ngpio = 32, + }, + }, +}; /* - * Get the GPIO interrupt level + * Set GPIO interrupt level */ -static int rb532_gpio_get_int_level(struct gpio_chip *chip, unsigned offset) +void rb532_gpio_set_ilevel(int bit, unsigned gpio) { - u32 mask = 1 << offset; - struct rb532_gpio_chip *gpch; - - gpch = container_of(chip, struct rb532_gpio_chip, chip); - return readl(gpch->regbase + GPIOILEVEL) & mask; + rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOILEVEL); } +EXPORT_SYMBOL(rb532_gpio_set_ilevel); /* - * Set the GPIO interrupt status + * Set GPIO interrupt status */ -static void rb532_gpio_set_int_status(struct gpio_chip *chip, - unsigned offset, int value) +void rb532_gpio_set_istat(int bit, unsigned gpio) { - unsigned long flags; - u32 mask = 1 << offset; - u32 tmp; - struct rb532_gpio_chip *gpch; - void __iomem *gpis; - - gpch = container_of(chip, struct rb532_gpio_chip, chip); - gpis = gpch->regbase + GPIOISTAT; - - local_irq_save(flags); - tmp = readl(gpis); - if (value) - tmp |= mask; - else - tmp &= ~mask; - writel(tmp, gpis); - local_irq_restore(flags); + rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOISTAT); } +EXPORT_SYMBOL(rb532_gpio_set_istat); /* - * Get the GPIO interrupt status + * Configure GPIO alternate function */ -static int rb532_gpio_get_int_status(struct gpio_chip *chip, unsigned offset) +static void rb532_gpio_set_func(int bit, unsigned gpio) { - u32 mask = 1 << offset; - struct rb532_gpio_chip *gpch; - - gpch = container_of(chip, struct rb532_gpio_chip, chip); - return readl(gpch->regbase + GPIOISTAT) & mask; + rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC); } -static struct rb532_gpio_chip rb532_gpio_chip[] = { - [0] = { - .chip = { - .label = "gpio0", - .direction_input = rb532_gpio_direction_input, - .direction_output = rb532_gpio_direction_output, - .get = rb532_gpio_get, - .set = rb532_gpio_set, - .base = 0, - .ngpio = 32, - }, - .get_int_level = rb532_gpio_get_int_level, - .set_int_level = rb532_gpio_set_int_level, - .get_int_status = rb532_gpio_get_int_status, - .set_int_status = rb532_gpio_set_int_status, - }, -}; - int __init rb532_gpio_init(void) { struct resource *r; @@ -310,9 +261,11 @@ int __init rb532_gpio_init(void) return -ENXIO; } - /* Set the interrupt status and level for the CF pin */ - rb532_gpio_set_int_level(&rb532_gpio_chip->chip, CF_GPIO_NUM, 1); - rb532_gpio_set_int_status(&rb532_gpio_chip->chip, CF_GPIO_NUM, 0); + /* configure CF_GPIO_NUM as CFRDY IRQ source */ + rb532_gpio_set_func(0, CF_GPIO_NUM); + rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM); + rb532_gpio_set_ilevel(1, CF_GPIO_NUM); + rb532_gpio_set_istat(0, CF_GPIO_NUM); return 0; } -- cgit v1.2.3 From 664c4bbb73ec53e4f81f7d80a09571b49bad1f96 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 3 Nov 2008 11:31:54 +0000 Subject: MIPS: csrc-r4k: Fix spelling mistake. Signed-off-by: Ralf Baechle --- arch/mips/kernel/csrc-r4k.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c index 86e026f067bc..74fb74583b4e 100644 --- a/arch/mips/kernel/csrc-r4k.c +++ b/arch/mips/kernel/csrc-r4k.c @@ -27,7 +27,7 @@ int __init init_mips_clocksource(void) if (!cpu_has_counter || !mips_hpt_frequency) return -ENXIO; - /* Calclate a somewhat reasonable rating value */ + /* Calculate a somewhat reasonable rating value */ clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; clocksource_set_clock(&clocksource_mips, mips_hpt_frequency); -- cgit v1.2.3 From a24e849c019f15796984be9fe301fa9ead6f0f9e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 3 Nov 2008 11:32:34 +0000 Subject: MIPS: csrc-r4k: Fix declaration depending on the wrong CONFIG_ symbol. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/time.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h index d3bd5c5aa2ec..9601ea950542 100644 --- a/arch/mips/include/asm/time.h +++ b/arch/mips/include/asm/time.h @@ -63,7 +63,7 @@ static inline int mips_clockevent_init(void) /* * Initialize the count register as a clocksource */ -#ifdef CONFIG_CEVT_R4K +#ifdef CONFIG_CSRC_R4K extern int init_mips_clocksource(void); #else static inline int init_mips_clocksource(void) -- cgit v1.2.3 From cce257109f534b4954a5d04aa4ba6905f4682f93 Mon Sep 17 00:00:00 2001 From: Jose Alberto Reguero Date: Thu, 13 Nov 2008 14:14:18 -0300 Subject: V4L/DVB (9664): af9015: don't reconnect device in USB-bus Don't reconnect device in the USB-bus. Reconnect command was not executed every time by device firmware and that causes harm. Reconnection is not needed so remove it. Signed-off-by: Jose Alberto Reguero Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 847d8fdd9ec4..e9ab0249d133 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -681,12 +681,6 @@ static int af9015_download_firmware(struct usb_device *udev, goto error; } - /* firmware is running, reconnect device in the usb bus */ - req.cmd = RECONNECT_USB; - ret = af9015_rw_udev(udev, &req); - if (ret) - err("reconnect failed: %d", ret); - error: return ret; } @@ -1208,6 +1202,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .usb_ctrl = DEVICE_SPECIFIC, .download_firmware = af9015_download_firmware, .firmware = "dvb-usb-af9015.fw", + .no_reconnect = 1, .size_of_priv = sizeof(struct af9015_state), \ @@ -1306,6 +1301,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .usb_ctrl = DEVICE_SPECIFIC, .download_firmware = af9015_download_firmware, .firmware = "dvb-usb-af9015.fw", + .no_reconnect = 1, .size_of_priv = sizeof(struct af9015_state), \ -- cgit v1.2.3 From 818a557eeb9c16a9a2dc93df348b0ff68fbc487f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 20 Nov 2008 10:30:26 -0300 Subject: V4L/DVB (9668): em28xx: fix a race condition with hald Newer versions of hald tries to open it to call QUERYCAP. Due to the lack of a proper locking, it is possible to open the device before it finishes initialization. This patch adds a lock to avoid this risk, and to protect the list of em28xx devices. While here, remove the uneeded BKL lock. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 128 +++++++++++++++++------------- 1 file changed, 75 insertions(+), 53 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index c32fc7d24a42..90a11b5ac0b1 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -73,6 +73,7 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); static LIST_HEAD(em28xx_devlist); +static DEFINE_MUTEX(em28xx_devlist_mutex); static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; @@ -1519,7 +1520,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) struct em28xx_fh *fh; enum v4l2_buf_type fh_type = 0; - lock_kernel(); + mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(h, &em28xx_devlist, devlist) { if (h->vdev->minor == minor) { dev = h; @@ -1535,10 +1536,11 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) dev = h; } } - if (NULL == dev) { - unlock_kernel(); + mutex_unlock(&em28xx_devlist_mutex); + if (NULL == dev) return -ENODEV; - } + + mutex_lock(&dev->lock); em28xx_videodbg("open minor=%d type=%s users=%d\n", minor, v4l2_type_names[fh_type], dev->users); @@ -1547,10 +1549,9 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL); if (!fh) { em28xx_errdev("em28xx-video.c: Out of memory?!\n"); - unlock_kernel(); + mutex_unlock(&dev->lock); return -ENOMEM; } - mutex_lock(&dev->lock); fh->dev = dev; fh->radio = radio; fh->type = fh_type; @@ -1584,7 +1585,6 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) sizeof(struct em28xx_buffer), fh); mutex_unlock(&dev->lock); - unlock_kernel(); return errCode; } @@ -1871,6 +1871,7 @@ int em28xx_register_extension(struct em28xx_ops *ops) { struct em28xx *dev = NULL; + mutex_lock(&em28xx_devlist_mutex); mutex_lock(&em28xx_extension_devlist_lock); list_add_tail(&ops->next, &em28xx_extension_devlist); list_for_each_entry(dev, &em28xx_devlist, devlist) { @@ -1879,6 +1880,7 @@ int em28xx_register_extension(struct em28xx_ops *ops) } printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name); mutex_unlock(&em28xx_extension_devlist_lock); + mutex_unlock(&em28xx_devlist_mutex); return 0; } EXPORT_SYMBOL(em28xx_register_extension); @@ -1887,6 +1889,7 @@ void em28xx_unregister_extension(struct em28xx_ops *ops) { struct em28xx *dev = NULL; + mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(dev, &em28xx_devlist, devlist) { if (dev) ops->fini(dev); @@ -1896,6 +1899,7 @@ void em28xx_unregister_extension(struct em28xx_ops *ops) printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name); list_del(&ops->next); mutex_unlock(&em28xx_extension_devlist_lock); + mutex_unlock(&em28xx_devlist_mutex); } EXPORT_SYMBOL(em28xx_unregister_extension); @@ -1921,6 +1925,60 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev, } +static int register_analog_devices(struct em28xx *dev) +{ + int ret; + + /* allocate and fill video video_device struct */ + dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video"); + if (!dev->vdev) { + em28xx_errdev("cannot allocate video_device.\n"); + return -ENODEV; + } + + /* register v4l2 video video_device */ + ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER, + video_nr[dev->devno]); + if (ret) { + em28xx_errdev("unable to register video device (error=%i).\n", + ret); + return ret; + } + + /* Allocate and fill vbi video_device struct */ + dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi"); + + /* register v4l2 vbi video_device */ + ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, + vbi_nr[dev->devno]); + if (ret < 0) { + em28xx_errdev("unable to register vbi device\n"); + return ret; + } + + if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) { + dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio"); + if (!dev->radio_dev) { + em28xx_errdev("cannot allocate video_device.\n"); + return -ENODEV; + } + ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO, + radio_nr[dev->devno]); + if (ret < 0) { + em28xx_errdev("can't register radio device\n"); + return ret; + } + em28xx_info("Registered radio device as /dev/radio%d\n", + dev->radio_dev->num); + } + + em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n", + dev->vdev->num, dev->vbi_dev->num); + + return 0; +} + + /* * em28xx_init_dev() * allocates and inits the device structs, registers i2c bus and v4l device @@ -2000,50 +2058,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } - list_add_tail(&dev->devlist, &em28xx_devlist); - - /* allocate and fill video video_device struct */ - dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video"); - if (NULL == dev->vdev) { - em28xx_errdev("cannot allocate video_device.\n"); - goto fail_unreg; - } - - /* register v4l2 video video_device */ - retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, - video_nr[dev->devno]); - if (retval) { - em28xx_errdev("unable to register video device (error=%i).\n", - retval); - goto fail_unreg; - } - - /* Allocate and fill vbi video_device struct */ - dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi"); - /* register v4l2 vbi video_device */ - if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI, - vbi_nr[dev->devno]) < 0) { - em28xx_errdev("unable to register vbi device\n"); - retval = -ENODEV; - goto fail_unreg; - } - - if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) { - dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio"); - if (NULL == dev->radio_dev) { - em28xx_errdev("cannot allocate video_device.\n"); - goto fail_unreg; - } - retval = video_register_device(dev->radio_dev, VFL_TYPE_RADIO, - radio_nr[dev->devno]); - if (retval < 0) { - em28xx_errdev("can't register radio device\n"); - goto fail_unreg; - } - em28xx_info("Registered radio device as /dev/radio%d\n", - dev->radio_dev->num); - } - /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); INIT_LIST_HEAD(&dev->vidq.queued); @@ -2070,8 +2084,14 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, video_mux(dev, 0); - em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n", - dev->vdev->num, dev->vbi_dev->num); + mutex_lock(&em28xx_devlist_mutex); + list_add_tail(&dev->devlist, &em28xx_devlist); + retval = register_analog_devices(dev); + if (retval < 0) { + em28xx_release_resources(dev); + mutex_unlock(&em28xx_devlist_mutex); + goto fail_reg_devices; + } mutex_lock(&em28xx_extension_devlist_lock); if (!list_empty(&em28xx_extension_devlist)) { @@ -2081,11 +2101,13 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, } } mutex_unlock(&em28xx_extension_devlist_lock); + mutex_unlock(&em28xx_devlist_mutex); return 0; fail_unreg: em28xx_release_resources(dev); +fail_reg_devices: mutex_unlock(&dev->lock); return retval; } -- cgit v1.2.3 From ddb4cbfc53aa0913ee8da059fcbf628d14f40f63 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 20 Nov 2008 20:00:44 +0000 Subject: [CIFS] Do not attempt to close invalidated file handles If a connection with open file handles has gone down and come back up and reconnected without reopening the file handle yet, do not attempt to send an SMB close request for this handle in cifs_close. We were checking for the connection being invalid in cifs_close but since the connection may have been reconnected we also need to check whether the file handle was marked invalid (otherwise we could close the wrong file handle by accident). Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 10 +++++++++- fs/cifs/file.c | 21 ++++++++++++++------- fs/cifs/misc.c | 3 +++ fs/cifs/readdir.c | 5 ++++- 4 files changed, 30 insertions(+), 9 deletions(-) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index f1ae1f57c30d..c57c0565547f 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -606,7 +606,15 @@ GLOBAL_EXTERN struct list_head cifs_tcp_ses_list; * changes to the tcon->tidStatus should be done while holding this lock. */ GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock; -GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ + +/* + * This lock protects the cifs_file->llist and cifs_file->flist + * list operations, and updates to some flags (cifs_file->invalidHandle) + * It will be moved to either use the tcon->stat_lock or equivalent later. + * If cifs_tcp_ses_lock and the lock below are both needed to be held, then + * the cifs_tcp_ses_lock must be grabbed first and released last. + */ +GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; GLOBAL_EXTERN struct list_head GlobalOplock_Q; diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 6449e1aae621..b691b893a848 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -488,12 +488,13 @@ int cifs_close(struct inode *inode, struct file *file) pTcon = cifs_sb->tcon; if (pSMBFile) { struct cifsLockInfo *li, *tmp; - + write_lock(&GlobalSMBSeslock); pSMBFile->closePend = true; if (pTcon) { /* no sense reconnecting to close a file that is already closed */ if (!pTcon->need_reconnect) { + write_unlock(&GlobalSMBSeslock); timeout = 2; while ((atomic_read(&pSMBFile->wrtPending) != 0) && (timeout <= 2048)) { @@ -510,12 +511,15 @@ int cifs_close(struct inode *inode, struct file *file) timeout *= 4; } if (atomic_read(&pSMBFile->wrtPending)) - cERROR(1, - ("close with pending writes")); - rc = CIFSSMBClose(xid, pTcon, + cERROR(1, ("close with pending write")); + if (!pTcon->need_reconnect && + !pSMBFile->invalidHandle) + rc = CIFSSMBClose(xid, pTcon, pSMBFile->netfid); - } - } + } else + write_unlock(&GlobalSMBSeslock); + } else + write_unlock(&GlobalSMBSeslock); /* Delete any outstanding lock records. We'll lose them when the file is closed anyway. */ @@ -587,15 +591,18 @@ int cifs_closedir(struct inode *inode, struct file *file) pTcon = cifs_sb->tcon; cFYI(1, ("Freeing private data in close dir")); + write_lock(&GlobalSMBSeslock); if (!pCFileStruct->srch_inf.endOfSearch && !pCFileStruct->invalidHandle) { pCFileStruct->invalidHandle = true; + write_unlock(&GlobalSMBSeslock); rc = CIFSFindClose(xid, pTcon, pCFileStruct->netfid); cFYI(1, ("Closing uncompleted readdir with rc %d", rc)); /* not much we can do if it fails anyway, ignore rc */ rc = 0; - } + } else + write_unlock(&GlobalSMBSeslock); ptmp = pCFileStruct->srch_inf.ntwrk_buf_start; if (ptmp) { cFYI(1, ("closedir free smb buf in srch struct")); diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index addd1dcc2d79..9ee3f689c2b0 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -555,12 +555,14 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) continue; cifs_stats_inc(&tcon->num_oplock_brks); + write_lock(&GlobalSMBSeslock); list_for_each(tmp2, &tcon->openFileList) { netfile = list_entry(tmp2, struct cifsFileInfo, tlist); if (pSMB->Fid != netfile->netfid) continue; + write_unlock(&GlobalSMBSeslock); read_unlock(&cifs_tcp_ses_lock); cFYI(1, ("file id match, oplock break")); pCifsInode = CIFS_I(netfile->pInode); @@ -576,6 +578,7 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) return true; } + write_unlock(&GlobalSMBSeslock); read_unlock(&cifs_tcp_ses_lock); cFYI(1, ("No matching file for oplock break")); return true; diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 58d57299f2a0..9f51f9bf0292 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -741,11 +741,14 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon, (index_to_find < first_entry_in_buffer)) { /* close and restart search */ cFYI(1, ("search backing up - close and restart search")); + write_lock(&GlobalSMBSeslock); if (!cifsFile->srch_inf.endOfSearch && !cifsFile->invalidHandle) { cifsFile->invalidHandle = true; + write_unlock(&GlobalSMBSeslock); CIFSFindClose(xid, pTcon, cifsFile->netfid); - } + } else + write_unlock(&GlobalSMBSeslock); if (cifsFile->srch_inf.ntwrk_buf_start) { cFYI(1, ("freeing SMB ff cache buf on search rewind")); if (cifsFile->srch_inf.smallBuf) -- cgit v1.2.3 From ed79b86d8acf1f3d3bb83f04dc216c8dfa1d5970 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 20 Nov 2008 10:54:09 +0100 Subject: parisc: fix bug in compat_arch_ptrace Commit 81e192d6ce303b6792aa38ff35f41a1a7357f23a ("parisc: convert to generic compat_sys_ptrace") introduced a bug which segfaults the parisc 64bit kernel when stracing 32bit applications: Kernel Fault: Code=15 regs=00000000bafa42b0 (Addr=00000001baf5ab57) YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001101111111100001011 Tainted: G W r00-03 000000ff0806ff0b 000000004068edc0 00000000401203f8 00000000fb3e2508 r04-07 0000000040686dc0 00000000baf5a800 fffffffffffffffc fffffffffb3e2508 r08-11 00000000baf5a800 000000000004b068 00000000000402b0 0000000000040d68 r12-15 0000000000042a9c 0000000000040a9c 0000000000040d60 0000000000042e9c r16-19 000000000004b060 000000000004b058 0000000000042d9c ffffffffffffffff r20-23 000000000800000b 0000000000000000 000000000800000b fffffffffb3e2508 r24-27 00000000fffffffc 0000000000000003 00000000fffffffc 0000000040686dc0 r28-31 00000001baf5a7ff 00000000bafa4280 00000000bafa42b0 00000000000001d7 sr00-03 0000000000fca000 0000000000000000 0000000000000000 0000000000fca000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040120400 0000000040120404 IIR: 4b9a06b0 ISR: 0000000000000000 IOR: 00000001baf5ab57 CPU: 0 CR30: 00000000bafa4000 CR31: 00000000d22344e0 ORIG_R28: 00000000fb3e2248 IAOQ[0]: compat_arch_ptrace+0xb8/0x160 IAOQ[1]: compat_arch_ptrace+0xbc/0x160 RP(r2): compat_arch_ptrace+0xb0/0x160 Backtrace: [<00000000401612ac>] compat_sys_ptrace+0x15c/0x180 [<0000000040104ef8>] syscall_exit+0x0/0x14 The problem is that compat_arch_ptrace() enters with an addr value of type compat_ulong_t and calls translate_usr_offset() to translate the address offset into a struct pt_regs offset like this: addr = translate_usr_offset(addr) this means that any return value of translate_usr_offset() is stored back as compat_ulong_t type into the addr variable. But since translate_usr_offset() returns -1 for invalid offsets, addr can now get the value 0xffffffff which then fails the next return-value sanity check and thus the kernel tries to access invalid memory: if (addr < 0) break; Fix this bug by modifying translate_usr_offset() to take and return values of type compat_ulong_t, and by returning the value "sizeof(struct pt_regs)" as an error indicator. Additionally change the sanity check to check for return values for >= sizeof(struct pt_regs). This patch survived my compile and run-tests. Signed-off-by: Helge Deller Signed-off-by: Linus Torvalds --- arch/parisc/kernel/ptrace.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index 90904f9dfc50..927db3668b6f 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -183,10 +183,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) * being 64 bit in both cases. */ -static long translate_usr_offset(long offset) +static compat_ulong_t translate_usr_offset(compat_ulong_t offset) { if (offset < 0) - return -1; + return sizeof(struct pt_regs); else if (offset <= 32*4) /* gr[0..31] */ return offset * 2 + 4; else if (offset <= 32*4+32*8) /* gr[0..31] + fr[0..31] */ @@ -194,7 +194,7 @@ static long translate_usr_offset(long offset) else if (offset < sizeof(struct pt_regs)/2 + 32*4) return offset * 2 + 4 - 32*8; else - return -1; + return sizeof(struct pt_regs); } long compat_arch_ptrace(struct task_struct *child, compat_long_t request, @@ -209,7 +209,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, if (addr & (sizeof(compat_uint_t)-1)) break; addr = translate_usr_offset(addr); - if (addr < 0) + if (addr >= sizeof(struct pt_regs)) break; tmp = *(compat_uint_t *) ((char *) task_regs(child) + addr); @@ -236,7 +236,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, if (addr & (sizeof(compat_uint_t)-1)) break; addr = translate_usr_offset(addr); - if (addr < 0) + if (addr >= sizeof(struct pt_regs)) break; if (addr >= PT_FR0 && addr <= PT_FR31 + 4) { /* Special case, fp regs are 64 bits anyway */ -- cgit v1.2.3 From 23918b03060f6e572168fdde1798a905679d2e06 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 20 Nov 2008 16:06:21 -0500 Subject: SUNRPC: Fix a performance regression in the RPC authentication code Fix a regression reported by Max Kellermann whereby kernel profiling showed that his clients were spending 45% of their time in rpcauth_lookup_credcache. It turns out that although his processes had identical uid/gid/groups, generic_match() was failing to detect this, because the task->group_info pointers were not shared. This again lead to the creation of a huge number of identical credentials at the RPC layer. The regression is fixed by comparing the contents of task->group_info if the actual pointers are not identical. Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds --- net/sunrpc/auth_generic.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c index 744b79fdcb19..4028502f0528 100644 --- a/net/sunrpc/auth_generic.c +++ b/net/sunrpc/auth_generic.c @@ -133,13 +133,29 @@ static int generic_match(struct auth_cred *acred, struct rpc_cred *cred, int flags) { struct generic_cred *gcred = container_of(cred, struct generic_cred, gc_base); + int i; if (gcred->acred.uid != acred->uid || gcred->acred.gid != acred->gid || - gcred->acred.group_info != acred->group_info || gcred->acred.machine_cred != acred->machine_cred) - return 0; + goto out_nomatch; + + /* Optimisation in the case where pointers are identical... */ + if (gcred->acred.group_info == acred->group_info) + goto out_match; + + /* Slow path... */ + if (gcred->acred.group_info->ngroups != acred->group_info->ngroups) + goto out_nomatch; + for (i = 0; i < gcred->acred.group_info->ngroups; i++) { + if (GROUP_AT(gcred->acred.group_info, i) != + GROUP_AT(acred->group_info, i)) + goto out_nomatch; + } +out_match: return 1; +out_nomatch: + return 0; } void __init rpc_init_generic_auth(void) -- cgit v1.2.3 From 0ca4b6b00113b064c080d26d803d0d7c80fb5dc8 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 20 Nov 2008 14:09:33 -0700 Subject: x86: Fix interrupt leak due to migration When we migrate an interrupt from one CPU to another, we set the move_in_progress flag and clean up the vectors later once they're not being used. If you're unlucky and call destroy_irq() before the vectors become un-used, the move_in_progress flag is never cleared, which causes the interrupt to become unusable. This was discovered by Jesse Brandeburg for whom it manifested as an MSI-X device refusing to use MSI-X mode when the driver was unloaded and reloaded repeatedly. Signed-off-by: Matthew Wilcox Signed-off-by: Linus Torvalds --- arch/x86/kernel/io_apic.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c index 7a3f2028e2eb..c9513e1ff28d 100644 --- a/arch/x86/kernel/io_apic.c +++ b/arch/x86/kernel/io_apic.c @@ -1140,6 +1140,20 @@ static void __clear_irq_vector(int irq) cfg->vector = 0; cpus_clear(cfg->domain); + + if (likely(!cfg->move_in_progress)) + return; + cpus_and(mask, cfg->old_domain, cpu_online_map); + for_each_cpu_mask_nr(cpu, mask) { + for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; + vector++) { + if (per_cpu(vector_irq, cpu)[vector] != irq) + continue; + per_cpu(vector_irq, cpu)[vector] = -1; + break; + } + } + cfg->move_in_progress = 0; } void __setup_vector_irq(int cpu) -- cgit v1.2.3 From b704882e70d87d7f56db5ff17e2253f3fa90e4f3 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 20 Nov 2008 13:27:12 -0800 Subject: [IA64] Rationalize kernel mode alignment checking Itanium processors can handle some misaligned data accesses. They also provide a mode where all such accesses are forced to trap. The kernel was schizophrenic about use of this mode: * Base kernel code ran in permissive mode where the only traps generated were from those cases that the h/w could not handle. * Interrupt, syscall and trap code ran in strict mode where all unaligned accesses caused traps to the 0x5a00 unaligned reference vector. Use strict alignment checking throughout the kernel, but make sure that we continue to let user mode use more relaxed mode as the default. Signed-off-by: Tony Luck --- arch/ia64/kernel/entry.S | 1 + arch/ia64/kernel/head.S | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 7ef0c594f5ed..d435f4a7a96c 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -499,6 +499,7 @@ GLOBAL_ENTRY(prefetch_stack) END(prefetch_stack) GLOBAL_ENTRY(kernel_execve) + rum psr.ac mov r15=__NR_execve // put syscall number in place break __BREAK_SYSCALL br.ret.sptk.many rp diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 66e491d8baac..59301c472800 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -260,7 +260,7 @@ start_ap: * Switch into virtual mode: */ movl r16=(IA64_PSR_IT|IA64_PSR_IC|IA64_PSR_DT|IA64_PSR_RT|IA64_PSR_DFH|IA64_PSR_BN \ - |IA64_PSR_DI) + |IA64_PSR_DI|IA64_PSR_AC) ;; mov cr.ipsr=r16 movl r17=1f -- cgit v1.2.3 From ef23cdbefc3ab7f2ee9ee6dc6d4a94d7d6ec5e2b Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Mon, 17 Nov 2008 10:18:08 +0900 Subject: [IA64] use mprintk instead of printk, in ia64_mca_modify_original_stack Using printk from MCA/INIT context is unsafe since it can cause deadlock. The ia64_mca_modify_original_stack is called from both of mca handler and init handler, so it should use mprintk instead of printk. Signed-off-by: Hidetoshi Seto Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 7dd96c127177..bab1de2d2f6a 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1139,7 +1139,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, return previous_current; no_mod: - printk(KERN_INFO "cpu %d, %s %s, original stack not modified\n", + mprintk(KERN_INFO "cpu %d, %s %s, original stack not modified\n", smp_processor_id(), type, msg); return previous_current; } -- cgit v1.2.3 From d5964107763d7155e9bea658098a337507b3e928 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 20 Nov 2008 13:38:16 -0800 Subject: [IA64] remove duplicate include iommu.h arch/ia64/kernel/pci-dma.c only needs to include iommu once. Signed-off-by: Huang Weiyi Signed-off-by: Tony Luck --- arch/ia64/kernel/pci-dma.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c index dbdb778efa05..2a92f637431d 100644 --- a/arch/ia64/kernel/pci-dma.c +++ b/arch/ia64/kernel/pci-dma.c @@ -19,7 +19,6 @@ #include #include -#include dma_addr_t bad_dma_address __read_mostly; EXPORT_SYMBOL(bad_dma_address); -- cgit v1.2.3 From 93fe10b670a7a6a1dc9649c7860f452dc7bbbb9d Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Tue, 18 Nov 2008 19:19:50 +0900 Subject: [IA64] ia64/pv_ops/pv_cpu_ops: fix _IA64_REG_IP case. pv_cpu_ops.getreg(_IA64_REG_IP) returned constant. But the returned ip valued should be the one in the caller, not of the callee. This patch fixes that. Signed-off-by: Isaku Yamahata Signed-off-by: Tony Luck --- arch/ia64/include/asm/intrinsics.h | 2 +- arch/ia64/include/asm/paravirt_privop.h | 13 +++++++++++++ arch/ia64/kernel/paravirt.c | 2 +- 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/arch/ia64/include/asm/intrinsics.h b/arch/ia64/include/asm/intrinsics.h index 47d686dba1eb..a3e44a5ed497 100644 --- a/arch/ia64/include/asm/intrinsics.h +++ b/arch/ia64/include/asm/intrinsics.h @@ -226,7 +226,7 @@ extern long ia64_cmpxchg_called_with_bad_pointer (void); /************************************************/ #define ia64_ssm IA64_INTRINSIC_MACRO(ssm) #define ia64_rsm IA64_INTRINSIC_MACRO(rsm) -#define ia64_getreg IA64_INTRINSIC_API(getreg) +#define ia64_getreg IA64_INTRINSIC_MACRO(getreg) #define ia64_setreg IA64_INTRINSIC_API(setreg) #define ia64_set_rr IA64_INTRINSIC_API(set_rr) #define ia64_get_rr IA64_INTRINSIC_API(get_rr) diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h index d577aac11835..0b597424fcfc 100644 --- a/arch/ia64/include/asm/paravirt_privop.h +++ b/arch/ia64/include/asm/paravirt_privop.h @@ -78,6 +78,19 @@ extern unsigned long ia64_native_getreg_func(int regnum); ia64_native_rsm(mask); \ } while (0) +/* returned ip value should be the one in the caller, + * not in __paravirt_getreg() */ +#define paravirt_getreg(reg) \ + ({ \ + unsigned long res; \ + BUILD_BUG_ON(!__builtin_constant_p(reg)); \ + if ((reg) == _IA64_REG_IP) \ + res = ia64_native_getreg(_IA64_REG_IP); \ + else \ + res = pv_cpu_ops.getreg(reg); \ + res; \ + }) + /****************************************************************************** * replacement of hand written assembly codes. */ diff --git a/arch/ia64/kernel/paravirt.c b/arch/ia64/kernel/paravirt.c index de35d8e8b7d2..9f14c16f6369 100644 --- a/arch/ia64/kernel/paravirt.c +++ b/arch/ia64/kernel/paravirt.c @@ -130,7 +130,7 @@ ia64_native_getreg_func(int regnum) unsigned long res = -1; switch (regnum) { CASE_GET_REG(GP); - CASE_GET_REG(IP); + /*CASE_GET_REG(IP);*/ /* returned ip value shouldn't be constant */ CASE_GET_REG(PSR); CASE_GET_REG(TP); CASE_GET_REG(SP); -- cgit v1.2.3 From 0090d481ee4c5d9a54ae2c457ab3ef9111dd4a91 Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Tue, 18 Nov 2008 19:20:51 +0900 Subject: [IA64] xen: fix xen_get_eflags. fix xen_get_eflags. It doesn't take any argument. Signed-off-by: Isaku Yamahata Signed-off-by: Tony Luck --- arch/ia64/xen/hypercall.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/xen/hypercall.S b/arch/ia64/xen/hypercall.S index d4ff0b9e79f1..45e02bb64a92 100644 --- a/arch/ia64/xen/hypercall.S +++ b/arch/ia64/xen/hypercall.S @@ -58,7 +58,7 @@ __HCALL2(xen_set_rr, HYPERPRIVOP_SET_RR) __HCALL2(xen_set_kr, HYPERPRIVOP_SET_KR) #ifdef CONFIG_IA32_SUPPORT -__HCALL1(xen_get_eflag, HYPERPRIVOP_GET_EFLAG) +__HCALL0(xen_get_eflag, HYPERPRIVOP_GET_EFLAG) __HCALL1(xen_set_eflag, HYPERPRIVOP_SET_EFLAG) // refer SDM vol1 3.1.8 #endif /* CONFIG_IA32_SUPPORT */ -- cgit v1.2.3 From 606572634c3faa5b32a8fc430266e6e9d78d2179 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 11 Nov 2008 10:22:22 +1100 Subject: powerpc/spufs: Fix spinning in spufs_ps_fault on signal Currently, we can end up in an infinite loop if we get a signal while the kernel has faulted in spufs_ps_fault. Eg: alarm(1); write(fd, some_spu_psmap_register_address, 4); - the write's copy_from_user will fault on the ps mapping, and signal_pending will be non-zero. Because returning from the fault handler will never clear TIF_SIGPENDING, so we'll just keep faulting, resulting in an unkillable process using 100% of CPU. This change returns VM_FAULT_SIGBUS if there's a fatal signal pending, letting us escape the loop. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/file.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index b73c369cc6f1..1b26071a86ca 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -390,6 +390,9 @@ static int spufs_ps_fault(struct vm_area_struct *vma, if (offset >= ps_size) return VM_FAULT_SIGBUS; + if (fatal_signal_pending(current)) + return VM_FAULT_SIGBUS; + /* * Because we release the mmap_sem, the context may be destroyed while * we're in spu_wait. Grab an extra reference so it isn't destroyed -- cgit v1.2.3 From 13d428afc007fcfcd6deeb215618f54cf9c0cae6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 20 Nov 2008 15:19:22 -0800 Subject: Linux 2.6.28-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a9ae5dc0aa16..7b1f2384094f 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Killer Bat of Doom # *DOCUMENTATION* -- cgit v1.2.3 From 75e07fc3d87ba9b3255e1fcd735186a533ea0754 Mon Sep 17 00:00:00 2001 From: Andreas Petlund Date: Thu, 20 Nov 2008 20:42:25 -0800 Subject: pci: Added quirk to disable msi for MCP55 NIC on Asus P5N32-SLI Premium Signed-off-by: Andreas Petlund Signed-off-by: David S. Miller --- drivers/pci/quirks.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5049a47030ac..5f4f85f56cb7 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -22,6 +22,7 @@ #include #include #include +#include #include "pci.h" int isa_dma_bridge_buggy; @@ -1828,6 +1829,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, ht_enable_msi_mapping); +/* The P5N32-SLI Premium motherboard from Asus has a problem with msi + * for the MCP55 NIC. It is not yet determined whether the msi problem + * also affects other devices. As for now, turn off msi for this device. + */ +static void __devinit nvenet_msi_disable(struct pci_dev *dev) +{ + if (dmi_name_in_vendors("P5N32-SLI PREMIUM")) { + dev_info(&dev->dev, + "Disabling msi for MCP55 NIC on P5N32-SLI Premium\n"); + dev->no_msi = 1; + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NVENET_15, + nvenet_msi_disable); + static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) { struct pci_dev *host_bridge; -- cgit v1.2.3 From 6436cbcd735a11fc93bf3353c68914bc545e6d1e Mon Sep 17 00:00:00 2001 From: Giuseppe Cavallaro Date: Thu, 20 Nov 2008 20:43:18 -0800 Subject: phy: fix phy_id detection also for broken hardware. This patch fixes the case when the phy_ids is mostly Fs and in some case 0x0 due to broken hardware. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 55bc24b234e3..25acbbde4a60 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,17 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs or all 0s, there is no device there */ - if ((0xffff == phy_id) || (0x00 == phy_id)) + /* If the phy_id is mostly Fs, there is no device there */ + if ((phy_id & 0x1fffffff) == 0x1fffffff) + return NULL; + + /* + * Broken hardware is sometimes missing the pull down resistor on the + * MDIO line, which results in reads to non-existent devices returning + * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent + * device as well. + */ + if (phy_id == 0) return NULL; dev = phy_device_create(bus, addr, phy_id); -- cgit v1.2.3 From a39c4ad1089be34d8dc66e926e93a52c44993a0a Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Thu, 20 Nov 2008 21:25:25 +0100 Subject: sound/sound_core: Fix sparse warnings Fix the following sparse warnings: sound/sound_core.c:460:2: warning: returning void-valued expression sound/sound_core.c:477:2: warning: returning void-valued expression sound/sound_core.c:510:5: warning: symbol 'soundcore_open' was not declared. Should it be static? Signed-off-by: Hannes Eder Signed-off-by: Takashi Iwai --- sound/sound_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/sound_core.c b/sound/sound_core.c index a75b289a5d78..10ba4218161b 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -457,7 +457,7 @@ EXPORT_SYMBOL(unregister_sound_mixer); void unregister_sound_midi(int unit) { - return sound_remove_unit(&chains[2], unit); + sound_remove_unit(&chains[2], unit); } EXPORT_SYMBOL(unregister_sound_midi); @@ -474,7 +474,7 @@ EXPORT_SYMBOL(unregister_sound_midi); void unregister_sound_dsp(int unit) { - return sound_remove_unit(&chains[3], unit); + sound_remove_unit(&chains[3], unit); } @@ -507,7 +507,7 @@ static struct sound_unit *__look_for_unit(int chain, int unit) return NULL; } -int soundcore_open(struct inode *inode, struct file *file) +static int soundcore_open(struct inode *inode, struct file *file) { int chain; int unit = iminor(inode); -- cgit v1.2.3 From 3a7abfd2ba26479615b81ac5e90d0122ef7f9fe0 Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Thu, 20 Nov 2008 21:21:43 -0500 Subject: ALSA: hda: Add STAC_DELL_M4_3 quirk Added STAC_DELL_M4_3 quirk for Dell systems, also reorganized the board config switch to assign number of digital muxes, microphones, and SPDIF muxes via the PCI quirk defined. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_sigmatel.c | 26 +++++++++++++++++++++---- 2 files changed, 23 insertions(+), 4 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index e0e54a27fc10..147f1764d976 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1072,6 +1072,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ref Reference board dell-m4-1 Dell desktops dell-m4-2 Dell desktops + dell-m4-3 Dell desktops STAC92HD73* ref Reference board diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 31a234afe1af..9047dc76b007 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -84,6 +84,7 @@ enum { STAC_92HD71BXX_REF, STAC_DELL_M4_1, STAC_DELL_M4_2, + STAC_DELL_M4_3, STAC_HP_M4, STAC_92HD71BXX_MODELS }; @@ -1671,10 +1672,17 @@ static unsigned int dell_m4_2_pin_configs[11] = { 0x40f000f0, 0x044413b0, 0x044413b0, }; +static unsigned int dell_m4_3_pin_configs[11] = { + 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110, + 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0, + 0x40f000f0, 0x044413b0, 0x044413b0, +}; + static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = { [STAC_92HD71BXX_REF] = ref92hd71bxx_pin_configs, [STAC_DELL_M4_1] = dell_m4_1_pin_configs, [STAC_DELL_M4_2] = dell_m4_2_pin_configs, + [STAC_DELL_M4_3] = dell_m4_3_pin_configs, [STAC_HP_M4] = NULL, }; @@ -1682,6 +1690,7 @@ static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = { [STAC_92HD71BXX_REF] = "ref", [STAC_DELL_M4_1] = "dell-m4-1", [STAC_DELL_M4_2] = "dell-m4-2", + [STAC_DELL_M4_3] = "dell-m4-3", [STAC_HP_M4] = "hp-m4", }; @@ -1717,6 +1726,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "unknown Dell", STAC_DELL_M4_2), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0264, "unknown Dell", STAC_DELL_M4_2), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02aa, + "unknown Dell", STAC_DELL_M4_3), {} /* terminator */ }; @@ -4571,14 +4582,21 @@ again: switch (spec->board_config) { case STAC_HP_M4: - spec->num_dmics = 0; - spec->num_smuxes = 0; - spec->num_dmuxes = 0; - /* enable internal microphone */ stac92xx_set_config_reg(codec, 0x0e, 0x01813040); stac92xx_auto_set_pinctl(codec, 0x0e, AC_PINCTL_IN_EN | AC_PINCTL_VREF_80); + /* fallthru */ + case STAC_DELL_M4_2: + spec->num_dmics = 0; + spec->num_smuxes = 0; + spec->num_dmuxes = 0; + break; + case STAC_DELL_M4_1: + case STAC_DELL_M4_3: + spec->num_dmics = 1; + spec->num_smuxes = 0; + spec->num_dmuxes = 0; break; default: spec->num_dmics = STAC92HD71BXX_NUM_DMICS; -- cgit v1.2.3 From b0fc5e043401df4cd243352f1030c4d23e767347 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 21 Nov 2008 08:37:03 +0100 Subject: ALSA: hda - Add a quirk for Dell Studio 15 Added the matching model=dell-m6 for Dell Studio 15 laptop. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 9047dc76b007..2b52a4056a9b 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1630,6 +1630,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "unknown Dell", STAC_DELL_M6), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0271, "unknown Dell", STAC_DELL_M6), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f, + "Dell Studio 15", STAC_DELL_M6), {} /* terminator */ }; -- cgit v1.2.3 From 522a110b42b306d696cf84e34c677ed0e7080194 Mon Sep 17 00:00:00 2001 From: Liming Wang Date: Fri, 21 Nov 2008 11:00:18 +0800 Subject: function tracing: fix wrong position computing of stack_trace Impact: make output of stack_trace complete if buffer overruns When read buffer overruns, the output of stack_trace isn't complete. When printing records with seq_printf in t_show, if the read buffer has overruned by the current record, then this record won't be printed to user space through read buffer, it will just be dropped in this printing. When next printing, t_start should return the "*pos"th record, which is the one dropped by previous printing, but it just returns (m->private + *pos)th record. Here we use a more sane method to implement seq_operations which can be found in kernel code. Thus we needn't initialize m->private. About testing, it's not easy to overrun read buffer, but we can use seq_printf to print more padding bytes in t_show, then it's easy to check whether or not records are lost. This commit has been tested on both condition of overrun and non overrun. Signed-off-by: Liming Wang Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace_stack.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c index be682b62fe58..3bdb44bde4b7 100644 --- a/kernel/trace/trace_stack.c +++ b/kernel/trace/trace_stack.c @@ -184,11 +184,16 @@ static struct file_operations stack_max_size_fops = { static void * t_next(struct seq_file *m, void *v, loff_t *pos) { - long i = (long)m->private; + long i; (*pos)++; - i++; + if (v == SEQ_START_TOKEN) + i = 0; + else { + i = *(long *)v; + i++; + } if (i >= max_stack_trace.nr_entries || stack_dump_trace[i] == ULONG_MAX) @@ -201,12 +206,15 @@ t_next(struct seq_file *m, void *v, loff_t *pos) static void *t_start(struct seq_file *m, loff_t *pos) { - void *t = &m->private; + void *t = SEQ_START_TOKEN; loff_t l = 0; local_irq_disable(); __raw_spin_lock(&max_stack_lock); + if (*pos == 0) + return SEQ_START_TOKEN; + for (; t && l < *pos; t = t_next(m, t, &l)) ; @@ -235,10 +243,10 @@ static int trace_lookup_stack(struct seq_file *m, long i) static int t_show(struct seq_file *m, void *v) { - long i = *(long *)v; + long i; int size; - if (i < 0) { + if (v == SEQ_START_TOKEN) { seq_printf(m, " Depth Size Location" " (%d entries)\n" " ----- ---- --------\n", @@ -246,6 +254,8 @@ static int t_show(struct seq_file *m, void *v) return 0; } + i = *(long *)v; + if (i >= max_stack_trace.nr_entries || stack_dump_trace[i] == ULONG_MAX) return 0; @@ -275,10 +285,6 @@ static int stack_trace_open(struct inode *inode, struct file *file) int ret; ret = seq_open(file, &stack_trace_seq_ops); - if (!ret) { - struct seq_file *m = file->private_data; - m->private = (void *)-1; - } return ret; } -- cgit v1.2.3 From b0788caf7af773b6c2374590dabd3a205f0918a8 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 21 Nov 2008 15:57:32 +0800 Subject: lockdep: consistent alignement for lockdep info Impact: prettify /proc/lockdep_info Just feel odd that not all lines of lockdep info are aligned. Signed-off-by: Li Zefan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/lockdep.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 06e157119d2b..46a404173db2 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -3276,10 +3276,10 @@ void __init lockdep_info(void) { printk("Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar\n"); - printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES); + printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES); printk("... MAX_LOCK_DEPTH: %lu\n", MAX_LOCK_DEPTH); printk("... MAX_LOCKDEP_KEYS: %lu\n", MAX_LOCKDEP_KEYS); - printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE); + printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE); printk("... MAX_LOCKDEP_ENTRIES: %lu\n", MAX_LOCKDEP_ENTRIES); printk("... MAX_LOCKDEP_CHAINS: %lu\n", MAX_LOCKDEP_CHAINS); printk("... CHAINHASH_SIZE: %lu\n", CHAINHASH_SIZE); -- cgit v1.2.3 From f80e919bb42c191bbe60ab078a59b30336d11d3b Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 24 Oct 2008 19:52:56 +0200 Subject: [WATCHDOG] fix mtx1_wdt compilation failure Using spin_lock_irqsave with a local variable called flags without declaring is a bad idea, fix this by declaring it. Signed-off-by: Florian Fainelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mtx-1_wdt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index b4b7b0a4c119..3acce623f209 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -98,6 +98,8 @@ static void mtx1_wdt_reset(void) static void mtx1_wdt_start(void) { + unsigned long flags; + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (!mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 1; @@ -110,6 +112,8 @@ static void mtx1_wdt_start(void) static int mtx1_wdt_stop(void) { + unsigned long flags; + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; -- cgit v1.2.3 From 21098c68df7115554fe041170899bdff709efd08 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 20 Nov 2008 10:58:01 -0500 Subject: [SCSI] fc_transport: fix old bug on bitflag definitions When the fastfail flag was added, it did not account for the flags being bit fields. Correct the definition so there is no longer a conflict. Signed-off-by: James Smart Signed-off-by: James Bottomley --- include/scsi/scsi_transport_fc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 49d8913c4f86..6e04e6fe79c7 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -357,7 +357,7 @@ struct fc_rport { /* aka fc_starget_attrs */ /* bit field values for struct fc_rport "flags" field: */ #define FC_RPORT_DEVLOSS_PENDING 0x01 #define FC_RPORT_SCAN_PENDING 0x02 -#define FC_RPORT_FAST_FAIL_TIMEDOUT 0x03 +#define FC_RPORT_FAST_FAIL_TIMEDOUT 0x04 #define dev_to_rport(d) \ container_of(d, struct fc_rport, dev) -- cgit v1.2.3 From 7cd5b08be3c489df11b559fef210b81133764ad4 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 19 Nov 2008 19:39:58 +0000 Subject: [WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards Bugzilla #9868: On Intel motherboards with the ICH9 based I/O controllers (Like DP35DP and DG33FB) the iTCO timer counts but it doesn't reboot the system after the counter expires. This patch fixes this by moving the enabling & disabling of the TCO_EN bit in the SMI_EN register into the start and stop code. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/iTCO_vendor_support.c | 31 ++++--------------------- drivers/watchdog/iTCO_wdt.c | 41 +++++++++++++++++++++++----------- 2 files changed, 32 insertions(+), 40 deletions(-) diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index ca344a85eb95..2474ebca88f6 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -1,7 +1,7 @@ /* * intel TCO vendor specific watchdog driver support * - * (c) Copyright 2006 Wim Van Sebroeck . + * (c) Copyright 2006-2008 Wim Van Sebroeck . * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,8 +19,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_vendor_support" -#define DRV_VERSION "1.01" -#define DRV_RELDATE "11-Nov-2006" +#define DRV_VERSION "1.02" #define PFX DRV_NAME ": " /* Includes */ @@ -78,24 +77,6 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n * 20.6 seconds. */ -static void supermicro_old_pre_start(unsigned long acpibase) -{ - unsigned long val32; - - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); /* Needed to activate watchdog */ -} - -static void supermicro_old_pre_stop(unsigned long acpibase) -{ - unsigned long val32; - - val32 = inl(SMI_EN); - val32 &= 0x00002000; /* Turn on SMI clearing watchdog */ - outl(val32, SMI_EN); /* Needed to deactivate watchdog */ -} - static void supermicro_old_pre_keepalive(unsigned long acpibase) { /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ @@ -247,18 +228,14 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) void iTCO_vendor_pre_start(unsigned long acpibase, unsigned int heartbeat) { - if (vendorsupport == SUPERMICRO_OLD_BOARD) - supermicro_old_pre_start(acpibase); - else if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_start(heartbeat); } EXPORT_SYMBOL(iTCO_vendor_pre_start); void iTCO_vendor_pre_stop(unsigned long acpibase) { - if (vendorsupport == SUPERMICRO_OLD_BOARD) - supermicro_old_pre_stop(acpibase); - else if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_stop(); } EXPORT_SYMBOL(iTCO_vendor_pre_stop); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index bfb93bc2ca9f..75483000a87d 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -1,7 +1,7 @@ /* * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) * - * (c) Copyright 2006-2007 Wim Van Sebroeck . + * (c) Copyright 2006-2008 Wim Van Sebroeck . * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -56,8 +56,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.03" -#define DRV_RELDATE "30-Apr-2008" +#define DRV_VERSION "1.04" #define PFX DRV_NAME ": " /* Includes */ @@ -311,6 +310,7 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void) static int iTCO_wdt_start(void) { unsigned int val; + unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -323,6 +323,18 @@ static int iTCO_wdt_start(void) return -EIO; } + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); + + /* Force the timer to its reload value by writing to the TCO_RLD + register */ + if (iTCO_wdt_private.iTCO_version == 2) + outw(0x01, TCO_RLD); + else if (iTCO_wdt_private.iTCO_version == 1) + outb(0x01, TCO_RLD); + /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ val = inw(TCO1_CNT); val &= 0xf7ff; @@ -338,6 +350,7 @@ static int iTCO_wdt_start(void) static int iTCO_wdt_stop(void) { unsigned int val; + unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -349,6 +362,11 @@ static int iTCO_wdt_stop(void) outw(val, TCO1_CNT); val = inw(TCO1_CNT); + /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ + val32 = inl(SMI_EN); + val32 &= 0x00002000; + outl(val32, SMI_EN); + /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); @@ -459,7 +477,6 @@ static int iTCO_wdt_open(struct inode *inode, struct file *file) /* * Reload and activate timer */ - iTCO_wdt_keepalive(); iTCO_wdt_start(); return nonseekable_open(inode, file); } @@ -604,7 +621,6 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, int ret; u32 base_address; unsigned long RCBA; - unsigned long val32; /* * Find the ACPI/PM base I/O address which is the base @@ -644,17 +660,13 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); - /* Set the TCO_EN bit in SMI_EN register */ + /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ if (!request_region(SMI_EN, 4, "iTCO_wdt")) { printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", SMI_EN); ret = -EIO; goto out; } - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); - release_region(SMI_EN, 4); /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ @@ -662,7 +674,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", TCOBASE); ret = -EIO; - goto out; + goto unreg_smi_en; } printk(KERN_INFO PFX @@ -701,6 +713,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, unreg_region: release_region(TCOBASE, 0x20); +unreg_smi_en: + release_region(SMI_EN, 4); out: if (iTCO_wdt_private.iTCO_version == 2) iounmap(iTCO_wdt_private.gcs); @@ -718,6 +732,7 @@ static void __devexit iTCO_wdt_cleanup(void) /* Deregister */ misc_deregister(&iTCO_wdt_miscdev); release_region(TCOBASE, 0x20); + release_region(SMI_EN, 4); if (iTCO_wdt_private.iTCO_version == 2) iounmap(iTCO_wdt_private.gcs); pci_dev_put(iTCO_wdt_private.pdev); @@ -782,8 +797,8 @@ static int __init iTCO_wdt_init_module(void) { int err; - printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s (%s)\n", - DRV_VERSION, DRV_RELDATE); + printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s\n", + DRV_VERSION); err = platform_driver_register(&iTCO_wdt_driver); if (err) -- cgit v1.2.3 From c6904ddb976d99b77d91b78a0ce5bdfffb416c49 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 19 Nov 2008 20:02:02 +0000 Subject: [WATCHDOG] iTCO_wdt : correct status clearing The iTCO_wdt code was not clearing the correct bits. It now clears the timeout status bit and then the SECOND_TO_STS bit and then the BOOT_STS bit. Note: we should first clear the SECOND_TO_STS bit before clearing the BOOT_STS bit. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/iTCO_wdt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 75483000a87d..2b5409f5b4e6 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -684,8 +684,9 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, TCOBASE); /* Clear out the (probably old) status */ - outb(0, TCO1_STS); - outb(3, TCO2_STS); + outb(8, TCO1_STS); /* Clear the Time Out Status bit */ + outb(2, TCO2_STS); /* Clear SECOND_TO_STS bit */ + outb(4, TCO2_STS); /* Clear BOOT_STS bit */ /* Make sure the watchdog is not running */ iTCO_wdt_stop(); -- cgit v1.2.3 From 28d41f53f05c51d4f445129de325b1072ee25b8b Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 19 Nov 2008 22:25:53 +0000 Subject: [WATCHDOG] iTCO_wdt: add PCI ID's for ICH9 & ICH10 chipsets Add support for the following I/O controller hubs: ICH7DH, ICH9M, ICH9M-E, ICH10, ICH10R, ICH10D and ICH10DO. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/iTCO_wdt.c | 118 +++++++++++++++++++++++++++----------------- 1 file changed, 73 insertions(+), 45 deletions(-) diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 2b5409f5b4e6..26173a270e94 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -20,34 +20,41 @@ * 82801BAM (ICH2-M) : document number 290687-002, 298242-027, * 82801CA (ICH3-S) : document number 290733-003, 290739-013, * 82801CAM (ICH3-M) : document number 290716-001, 290718-007, - * 82801DB (ICH4) : document number 290744-001, 290745-020, - * 82801DBM (ICH4-M) : document number 252337-001, 252663-005, + * 82801DB (ICH4) : document number 290744-001, 290745-025, + * 82801DBM (ICH4-M) : document number 252337-001, 252663-008, * 82801E (C-ICH) : document number 273599-001, 273645-002, - * 82801EB (ICH5) : document number 252516-001, 252517-003, - * 82801ER (ICH5R) : document number 252516-001, 252517-003, - * 82801FB (ICH6) : document number 301473-002, 301474-007, - * 82801FR (ICH6R) : document number 301473-002, 301474-007, - * 82801FBM (ICH6-M) : document number 301473-002, 301474-007, - * 82801FW (ICH6W) : document number 301473-001, 301474-007, - * 82801FRW (ICH6RW) : document number 301473-001, 301474-007, - * 82801GB (ICH7) : document number 307013-002, 307014-009, - * 82801GR (ICH7R) : document number 307013-002, 307014-009, - * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, - * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, - * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, - * 82801HB (ICH8) : document number 313056-003, 313057-009, - * 82801HR (ICH8R) : document number 313056-003, 313057-009, - * 82801HBM (ICH8M) : document number 313056-003, 313057-009, - * 82801HH (ICH8DH) : document number 313056-003, 313057-009, - * 82801HO (ICH8DO) : document number 313056-003, 313057-009, - * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009, - * 82801IB (ICH9) : document number 316972-001, 316973-006, - * 82801IR (ICH9R) : document number 316972-001, 316973-006, - * 82801IH (ICH9DH) : document number 316972-001, 316973-006, - * 82801IO (ICH9DO) : document number 316972-001, 316973-006, - * 6300ESB (6300ESB) : document number 300641-003, 300884-010, - * 631xESB (631xESB) : document number 313082-001, 313075-005, - * 632xESB (632xESB) : document number 313082-001, 313075-005 + * 82801EB (ICH5) : document number 252516-001, 252517-028, + * 82801ER (ICH5R) : document number 252516-001, 252517-028, + * 6300ESB (6300ESB) : document number 300641-004, 300884-013, + * 82801FB (ICH6) : document number 301473-002, 301474-026, + * 82801FR (ICH6R) : document number 301473-002, 301474-026, + * 82801FBM (ICH6-M) : document number 301473-002, 301474-026, + * 82801FW (ICH6W) : document number 301473-001, 301474-026, + * 82801FRW (ICH6RW) : document number 301473-001, 301474-026, + * 631xESB (631xESB) : document number 313082-001, 313075-006, + * 632xESB (632xESB) : document number 313082-001, 313075-006, + * 82801GB (ICH7) : document number 307013-003, 307014-024, + * 82801GR (ICH7R) : document number 307013-003, 307014-024, + * 82801GDH (ICH7DH) : document number 307013-003, 307014-024, + * 82801GBM (ICH7-M) : document number 307013-003, 307014-024, + * 82801GHM (ICH7-M DH) : document number 307013-003, 307014-024, + * 82801GU (ICH7-U) : document number 307013-003, 307014-024, + * 82801HB (ICH8) : document number 313056-003, 313057-017, + * 82801HR (ICH8R) : document number 313056-003, 313057-017, + * 82801HBM (ICH8M) : document number 313056-003, 313057-017, + * 82801HH (ICH8DH) : document number 313056-003, 313057-017, + * 82801HO (ICH8DO) : document number 313056-003, 313057-017, + * 82801HEM (ICH8M-E) : document number 313056-003, 313057-017, + * 82801IB (ICH9) : document number 316972-004, 316973-012, + * 82801IR (ICH9R) : document number 316972-004, 316973-012, + * 82801IH (ICH9DH) : document number 316972-004, 316973-012, + * 82801IO (ICH9DO) : document number 316972-004, 316973-012, + * 82801IBM (ICH9M) : document number 316972-004, 316973-012, + * 82801IEM (ICH9M-E) : document number 316972-004, 316973-012, + * 82801JIB (ICH10) : document number 319973-002, 319974-002, + * 82801JIR (ICH10R) : document number 319973-002, 319974-002, + * 82801JD (ICH10D) : document number 319973-002, 319974-002, + * 82801JDO (ICH10DO) : document number 319973-002, 319974-002 */ /* @@ -95,19 +102,26 @@ enum iTCO_chipsets { TCO_ICH6, /* ICH6 & ICH6R */ TCO_ICH6M, /* ICH6-M */ TCO_ICH6W, /* ICH6W & ICH6RW */ + TCO_631XESB, /* 631xESB/632xESB */ TCO_ICH7, /* ICH7 & ICH7R */ - TCO_ICH7M, /* ICH7-M */ + TCO_ICH7DH, /* ICH7DH */ + TCO_ICH7M, /* ICH7-M & ICH7-U */ TCO_ICH7MDH, /* ICH7-M DH */ TCO_ICH8, /* ICH8 & ICH8R */ - TCO_ICH8ME, /* ICH8M-E */ TCO_ICH8DH, /* ICH8DH */ TCO_ICH8DO, /* ICH8DO */ TCO_ICH8M, /* ICH8M */ + TCO_ICH8ME, /* ICH8M-E */ TCO_ICH9, /* ICH9 */ TCO_ICH9R, /* ICH9R */ TCO_ICH9DH, /* ICH9DH */ TCO_ICH9DO, /* ICH9DO */ - TCO_631XESB, /* 631xESB/632xESB */ + TCO_ICH9M, /* ICH9M */ + TCO_ICH9ME, /* ICH9M-E */ + TCO_ICH10, /* ICH10 */ + TCO_ICH10R, /* ICH10R */ + TCO_ICH10D, /* ICH10D */ + TCO_ICH10DO, /* ICH10DO */ }; static struct { @@ -128,19 +142,26 @@ static struct { {"ICH6 or ICH6R", 2}, {"ICH6-M", 2}, {"ICH6W or ICH6RW", 2}, + {"631xESB/632xESB", 2}, {"ICH7 or ICH7R", 2}, - {"ICH7-M", 2}, + {"ICH7DH", 2}, + {"ICH7-M or ICH7-U", 2}, {"ICH7-M DH", 2}, {"ICH8 or ICH8R", 2}, - {"ICH8M-E", 2}, {"ICH8DH", 2}, {"ICH8DO", 2}, {"ICH8M", 2}, + {"ICH8M-E", 2}, {"ICH9", 2}, {"ICH9R", 2}, {"ICH9DH", 2}, {"ICH9DO", 2}, - {"631xESB/632xESB", 2}, + {"ICH9M", 2}, + {"ICH9M-E", 2}, + {"ICH10", 2}, + {"ICH10R", 2}, + {"ICH10D", 2}, + {"ICH10DO", 2}, {NULL, 0} }; @@ -174,18 +195,6 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, - { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, - { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, @@ -202,6 +211,25 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_30, TCO_ICH7DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, + { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, + { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, + { ITCO_PCI_DEVICE(0x2919, TCO_ICH9M)}, + { ITCO_PCI_DEVICE(0x2917, TCO_ICH9ME)}, + { ITCO_PCI_DEVICE(0x3a18, TCO_ICH10)}, + { ITCO_PCI_DEVICE(0x3a16, TCO_ICH10R)}, + { ITCO_PCI_DEVICE(0x3a1a, TCO_ICH10D)}, + { ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); -- cgit v1.2.3 From 060264133b946786b4b28a1ba79e6725eaf258f3 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Fri, 14 Nov 2008 15:47:03 +0100 Subject: [WATCHDOG] hpwdt: set the mapped BIOS address space as executable The address provided by the SMBIOS/DMI CRU information is mapped via ioremap() in the virtual address space. However, since the address is executed (i.e. call'd), we need to set that pages as executable. Without that, I get following oops on a HP ProLiant DL385 G2 machine with BIOS from 05/29/2008 when I trigger crashdump: BUG: unable to handle kernel paging request at ffffc20011090c00 IP: [] 0xffffc20011090c00 PGD 12f813067 PUD 7fe6a067 PMD 7effe067 PTE 80000000fffd3173 Oops: 0011 [1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map CPU 1 Modules linked in: autofs4 ipv6 af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 fuse loop dm_mod rtc_cmos ipmi_si sg rtc_core i2c _piix4 ipmi_msghandler bnx2 sr_mod container button i2c_core hpilo joydev pcspkr rtc_lib shpchp hpwdt cdrom pci_hotplug usbhid hid ff_memless ohci_hcd ehci_hcd uhci_hcd usbcore edd ext3 mbcache jbd fan ide_pci_generic serverworks ide_core p ata_serverworks pata_acpi cciss ata_generic libata scsi_mod dock thermal process or thermal_sys hwmon Supported: Yes Pid: 0, comm: swapper Not tainted 2.6.27.5-HEAD_20081111100657-default #1 RIP: 0010:[] [] 0xffffc20011090c00 RSP: 0018:ffff88012f6f9e68 EFLAGS: 00010046 RAX: 0000000000000d02 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88012f6f9e98 R08: 666666666666660a R09: ffffffffa1006fc0 R10: 0000000000000000 R11: ffff88012f6f3ea8 R12: ffffc20011090c00 R13: ffff88012f6f9ee8 R14: 000000000000000e R15: 0000000000000000 FS: 00007ff70b29a6f0(0000) GS:ffff88012f6512c0(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffffc20011090c00 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff88012f6f2000, task ffff88007fa8a1c0) Stack: ffffffffa0f8502b 0000000000000002 ffffffff80738d50 0000000000000000 0000000000000046 0000000000000046 00000000fffffffe ffffffffa0f852ec 0000000000000000 ffffffff804ad9a6 0000000000000000 0000000000000000 Call Trace: Inexact backtrace: [] ? asminline_call+0x2b/0x55 [hpwdt] [] hpwdt_pretimeout+0x3c/0xa0 [hpwdt] [] ? notifier_call_chain+0x29/0x4c [] ? notify_die+0x2d/0x32 [] ? default_do_nmi+0x53/0x1d9 [] ? do_nmi+0x2e/0x43 [] ? nmi+0xa2/0xd0 [] ? native_safe_halt+0x2/0x3 <> [] ? default_idle+0x38/0x54 [] ? c1e_idle+0x118/0x11c [] ? cpu_idle+0xa9/0xf1 Code: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <55> 50 e8 00 00 00 00 58 48 2d 07 10 40 00 48 8b e8 58 e9 68 02 RIP [] 0xffffc20011090c00 RSP CR2: ffffc20011090c00 Kernel panic - not syncing: Fatal exception Signed-off-by: Bernhard Walle Signed-off-by: Wim Van Sebroeck Cc: Ingo Molnar Acked-by: "H. Peter Anvin" Signed-off-by: Thomas Mingarelli Cc: Alan Cox Signed-off-by: Andrew Morton --- drivers/watchdog/hpwdt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index a3765e0be4a8..f6cff7b5a547 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -40,6 +40,7 @@ #include #include #include +#include #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 @@ -394,6 +395,8 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm) smbios_cru64_ptr->double_offset; cru_rom_addr = ioremap(cru_physical_address, smbios_cru64_ptr->double_length); + set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK, + smbios_cru64_ptr->double_length >> PAGE_SHIFT); } } } -- cgit v1.2.3 From be1ffce3527d800ad50b955ede6eb44811cefd03 Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Fri, 21 Nov 2008 01:24:38 -0800 Subject: rtc: rtc-starfire fixes Changes: - remove locks, rtc class provides them - remove unused include - if the rtc can't handle set_time, the driver should not fake it Signed-off-by: Alessandro Zummo Signed-off-by: David S. Miller --- drivers/rtc/rtc-starfire.c | 66 +++++++++------------------------------------- 1 file changed, 13 insertions(+), 53 deletions(-) diff --git a/drivers/rtc/rtc-starfire.c b/drivers/rtc/rtc-starfire.c index 7ccb0dd700af..5be98bfd7ed3 100644 --- a/drivers/rtc/rtc-starfire.c +++ b/drivers/rtc/rtc-starfire.c @@ -6,7 +6,6 @@ #include #include #include -#include #include #include @@ -16,11 +15,6 @@ MODULE_AUTHOR("David S. Miller "); MODULE_DESCRIPTION("Starfire RTC driver"); MODULE_LICENSE("GPL"); -struct starfire_rtc { - struct rtc_device *rtc; - spinlock_t lock; -}; - static u32 starfire_get_time(void) { static char obp_gettod[32]; @@ -35,64 +29,31 @@ static u32 starfire_get_time(void) static int starfire_read_time(struct device *dev, struct rtc_time *tm) { - struct starfire_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; - - spin_lock_irqsave(&p->lock, flags); - secs = starfire_get_time(); - spin_unlock_irqrestore(&p->lock, flags); - - rtc_time_to_tm(secs, tm); - - return 0; -} - -static int starfire_set_time(struct device *dev, struct rtc_time *tm) -{ - unsigned long secs; - int err; - - err = rtc_tm_to_time(tm, &secs); - if (err) - return err; - - /* Do nothing, time is set using the service processor - * console on this platform. - */ - return 0; + rtc_time_to_tm(starfire_get_time(), tm); + return rtc_valid_tm(tm); } static const struct rtc_class_ops starfire_rtc_ops = { .read_time = starfire_read_time, - .set_time = starfire_set_time, }; -static int __devinit starfire_rtc_probe(struct platform_device *pdev) +static int __init starfire_rtc_probe(struct platform_device *pdev) { - struct starfire_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); - - if (!p) - return -ENOMEM; + struct rtc_device *rtc = rtc_device_register("starfire", &pdev->dev, + &starfire_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); - spin_lock_init(&p->lock); + platform_set_drvdata(pdev, rtc); - p->rtc = rtc_device_register("starfire", &pdev->dev, - &starfire_rtc_ops, THIS_MODULE); - if (IS_ERR(p->rtc)) { - int err = PTR_ERR(p->rtc); - kfree(p); - return err; - } - platform_set_drvdata(pdev, p); return 0; } -static int __devexit starfire_rtc_remove(struct platform_device *pdev) +static int __exit starfire_rtc_remove(struct platform_device *pdev) { - struct starfire_rtc *p = platform_get_drvdata(pdev); + struct rtc_device *rtc = platform_get_drvdata(pdev); - rtc_device_unregister(p->rtc); - kfree(p); + rtc_device_unregister(rtc); return 0; } @@ -102,13 +63,12 @@ static struct platform_driver starfire_rtc_driver = { .name = "rtc-starfire", .owner = THIS_MODULE, }, - .probe = starfire_rtc_probe, - .remove = __devexit_p(starfire_rtc_remove), + .remove = __exit_p(starfire_rtc_remove), }; static int __init starfire_rtc_init(void) { - return platform_driver_register(&starfire_rtc_driver); + return platform_driver_probe(&starfire_rtc_driver, starfire_rtc_probe); } static void __exit starfire_rtc_exit(void) -- cgit v1.2.3 From 39ce81ce7168aa7226fb9f182c3a2b57060d0905 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 18 Nov 2008 18:09:49 +0200 Subject: UBIFS: do not print scary memory allocation warnings Bulk-read allocates a lot of memory with 'kmalloc()', and when it is/gets fragmented 'kmalloc()' fails with a scarry warning. But because bulk-read is just an optimization, UBIFS keeps working fine. Supress the warning by passing __GFP_NOWARN option to 'kmalloc()'. This patch also introduces a macro for the magic 128KiB constant. This is just neater. Note, this is not really fixes the problem we had, but just hides the warnings. The further patches fix the problem. Signed-off-by: Artem Bityutskiy --- fs/ubifs/file.c | 4 ++-- fs/ubifs/super.c | 17 ++++++++++++----- fs/ubifs/ubifs.h | 2 +- 3 files changed, 15 insertions(+), 8 deletions(-) diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index 9124eee73aea..8be827cc7078 100644 --- a/fs/ubifs/file.c +++ b/fs/ubifs/file.c @@ -705,12 +705,12 @@ static int ubifs_do_bulk_read(struct ubifs_info *c, struct page *page1) int err, page_idx, page_cnt, ret = 0, n = 0; loff_t isize; - bu = kmalloc(sizeof(struct bu_info), GFP_NOFS); + bu = kmalloc(sizeof(struct bu_info), GFP_NOFS | __GFP_NOWARN); if (!bu) return 0; bu->buf_len = c->bulk_read_buf_size; - bu->buf = kmalloc(bu->buf_len, GFP_NOFS); + bu->buf = kmalloc(bu->buf_len, GFP_NOFS | __GFP_NOWARN); if (!bu->buf) goto out_free; diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 8780efbf40ac..ea493e6f2652 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -36,6 +36,12 @@ #include #include "ubifs.h" +/* + * Maximum amount of memory we may 'kmalloc()' without worrying that we are + * allocating too much. + */ +#define UBIFS_KMALLOC_OK (128*1024) + /* Slab cache for UBIFS inodes */ struct kmem_cache *ubifs_inode_slab; @@ -561,17 +567,18 @@ static int init_constants_early(struct ubifs_info *c) * calculations when reporting free space. */ c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ; + /* Buffer size for bulk-reads */ c->bulk_read_buf_size = UBIFS_MAX_BULK_READ * UBIFS_MAX_DATA_NODE_SZ; if (c->bulk_read_buf_size > c->leb_size) c->bulk_read_buf_size = c->leb_size; - if (c->bulk_read_buf_size > 128 * 1024) { - /* Check if we can kmalloc more than 128KiB */ - void *try = kmalloc(c->bulk_read_buf_size, GFP_KERNEL); - + if (c->bulk_read_buf_size > UBIFS_KMALLOC_OK) { + /* Check if we can kmalloc that much */ + void *try = kmalloc(c->bulk_read_buf_size, + GFP_KERNEL | __GFP_NOWARN); kfree(try); if (!try) - c->bulk_read_buf_size = 128 * 1024; + c->bulk_read_buf_size = UBIFS_KMALLOC_OK; } return 0; } diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index a7bd32fa15b9..06ba51efd65d 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -753,7 +753,7 @@ struct ubifs_znode { }; /** - * struct bu_info - bulk-read information + * struct bu_info - bulk-read information. * @key: first data node key * @zbranch: zbranches of data nodes to bulk read * @buf: buffer to read into -- cgit v1.2.3 From 6c0c42cdfd73fb161417403d8d077cb136e10bbf Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 18 Nov 2008 20:20:05 +0200 Subject: UBIFS: do not allocate too much Bulk-read allocates 128KiB or more using kmalloc. The allocation starts failing often when the memory gets fragmented. UBIFS still works fine in this case, because it falls-back to standard (non-optimized) read method, though. This patch teaches bulk-read to allocate exactly the amount of memory it needs, instead of allocating 128KiB every time. This patch is also a preparation to the further fix where we'll have a pre-allocated bulk-read buffer as well. For example, now the @bu object is prepared in 'ubifs_bulk_read()', so we could path either pre-allocated or allocated information to 'ubifs_do_bulk_read()' later. Or teaching 'ubifs_do_bulk_read()' not to allocate 'bu->buf' if it is already there. Signed-off-by: Artem Bityutskiy --- fs/ubifs/file.c | 70 +++++++++++++++++++++++++++++++++++++------------------- fs/ubifs/super.c | 12 +++++----- fs/ubifs/tnc.c | 7 +++++- fs/ubifs/ubifs.h | 4 ++-- 4 files changed, 60 insertions(+), 33 deletions(-) diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index 8be827cc7078..0c5c27d63f6e 100644 --- a/fs/ubifs/file.c +++ b/fs/ubifs/file.c @@ -691,32 +691,22 @@ out_err: /** * ubifs_do_bulk_read - do bulk-read. * @c: UBIFS file-system description object - * @page1: first page + * @bu: bulk-read information + * @page1: first page to read * * This function returns %1 if the bulk-read is done, otherwise %0 is returned. */ -static int ubifs_do_bulk_read(struct ubifs_info *c, struct page *page1) +static int ubifs_do_bulk_read(struct ubifs_info *c, struct bu_info *bu, + struct page *page1) { pgoff_t offset = page1->index, end_index; struct address_space *mapping = page1->mapping; struct inode *inode = mapping->host; struct ubifs_inode *ui = ubifs_inode(inode); - struct bu_info *bu; int err, page_idx, page_cnt, ret = 0, n = 0; + int allocate = bu->buf ? 0 : 1; loff_t isize; - bu = kmalloc(sizeof(struct bu_info), GFP_NOFS | __GFP_NOWARN); - if (!bu) - return 0; - - bu->buf_len = c->bulk_read_buf_size; - bu->buf = kmalloc(bu->buf_len, GFP_NOFS | __GFP_NOWARN); - if (!bu->buf) - goto out_free; - - data_key_init(c, &bu->key, inode->i_ino, - offset << UBIFS_BLOCKS_PER_PAGE_SHIFT); - err = ubifs_tnc_get_bu_keys(c, bu); if (err) goto out_warn; @@ -735,12 +725,25 @@ static int ubifs_do_bulk_read(struct ubifs_info *c, struct page *page1) * together. If all the pages were like this, bulk-read would * reduce performance, so we turn it off for a while. */ - ui->read_in_a_row = 0; - ui->bulk_read = 0; - goto out_free; + goto out_bu_off; } if (bu->cnt) { + if (allocate) { + /* + * Allocate bulk-read buffer depending on how many data + * nodes we are going to read. + */ + bu->buf_len = bu->zbranch[bu->cnt - 1].offs + + bu->zbranch[bu->cnt - 1].len - + bu->zbranch[0].offs; + ubifs_assert(bu->buf_len > 0); + ubifs_assert(bu->buf_len <= c->leb_size); + bu->buf = kmalloc(bu->buf_len, GFP_NOFS | __GFP_NOWARN); + if (!bu->buf) + goto out_bu_off; + } + err = ubifs_tnc_bulk_read(c, bu); if (err) goto out_warn; @@ -779,13 +782,17 @@ static int ubifs_do_bulk_read(struct ubifs_info *c, struct page *page1) ui->last_page_read = offset + page_idx - 1; out_free: - kfree(bu->buf); - kfree(bu); + if (allocate) + kfree(bu->buf); return ret; out_warn: ubifs_warn("ignoring error %d and skipping bulk-read", err); goto out_free; + +out_bu_off: + ui->read_in_a_row = ui->bulk_read = 0; + goto out_free; } /** @@ -803,18 +810,20 @@ static int ubifs_bulk_read(struct page *page) struct ubifs_info *c = inode->i_sb->s_fs_info; struct ubifs_inode *ui = ubifs_inode(inode); pgoff_t index = page->index, last_page_read = ui->last_page_read; - int ret = 0; + struct bu_info *bu; + int err = 0; ui->last_page_read = index; - if (!c->bulk_read) return 0; + /* * Bulk-read is protected by ui_mutex, but it is an optimization, so * don't bother if we cannot lock the mutex. */ if (!mutex_trylock(&ui->ui_mutex)) return 0; + if (index != last_page_read + 1) { /* Turn off bulk-read if we stop reading sequentially */ ui->read_in_a_row = 1; @@ -822,6 +831,7 @@ static int ubifs_bulk_read(struct page *page) ui->bulk_read = 0; goto out_unlock; } + if (!ui->bulk_read) { ui->read_in_a_row += 1; if (ui->read_in_a_row < 3) @@ -829,10 +839,22 @@ static int ubifs_bulk_read(struct page *page) /* Three reads in a row, so switch on bulk-read */ ui->bulk_read = 1; } - ret = ubifs_do_bulk_read(c, page); + + bu = kmalloc(sizeof(struct bu_info), GFP_NOFS | __GFP_NOWARN); + if (!bu) + return 0; + + bu->buf = NULL; + bu->buf_len = c->max_bu_buf_len; + data_key_init(c, &bu->key, inode->i_ino, + page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT); + + err = ubifs_do_bulk_read(c, bu, page); + kfree(bu); + out_unlock: mutex_unlock(&ui->ui_mutex); - return ret; + return err; } static int ubifs_readpage(struct file *file, struct page *page) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index ea493e6f2652..1d511569c035 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -569,16 +569,16 @@ static int init_constants_early(struct ubifs_info *c) c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ; /* Buffer size for bulk-reads */ - c->bulk_read_buf_size = UBIFS_MAX_BULK_READ * UBIFS_MAX_DATA_NODE_SZ; - if (c->bulk_read_buf_size > c->leb_size) - c->bulk_read_buf_size = c->leb_size; - if (c->bulk_read_buf_size > UBIFS_KMALLOC_OK) { + c->max_bu_buf_len = UBIFS_MAX_BULK_READ * UBIFS_MAX_DATA_NODE_SZ; + if (c->max_bu_buf_len > c->leb_size) + c->max_bu_buf_len = c->leb_size; + if (c->max_bu_buf_len > UBIFS_KMALLOC_OK) { /* Check if we can kmalloc that much */ - void *try = kmalloc(c->bulk_read_buf_size, + void *try = kmalloc(c->max_bu_buf_len, GFP_KERNEL | __GFP_NOWARN); kfree(try); if (!try) - c->bulk_read_buf_size = UBIFS_KMALLOC_OK; + c->max_bu_buf_len = UBIFS_KMALLOC_OK; } return 0; } diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c index 99e9a744cfd0..6eef5344a145 100644 --- a/fs/ubifs/tnc.c +++ b/fs/ubifs/tnc.c @@ -1501,7 +1501,12 @@ out: * @bu: bulk-read parameters and results * * Lookup consecutive data node keys for the same inode that reside - * consecutively in the same LEB. + * consecutively in the same LEB. This function returns zero in case of success + * and a negative error code in case of failure. + * + * Note, if the bulk-read buffer length (@bu->buf_len) is known, this function + * makes sure bulk-read nodes fit the buffer. Otherwise, this function prepares + * maxumum possible amount of nodes for bulk-read. */ int ubifs_tnc_get_bu_keys(struct ubifs_info *c, struct bu_info *bu) { diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 06ba51efd65d..870b5c479e95 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -969,7 +969,7 @@ struct ubifs_mount_opts { * @mst_node: master node * @mst_offs: offset of valid master node * @mst_mutex: protects the master node area, @mst_node, and @mst_offs - * @bulk_read_buf_size: buffer size for bulk-reads + * @max_bu_buf_len: maximum bulk-read buffer length * * @log_lebs: number of logical eraseblocks in the log * @log_bytes: log size in bytes @@ -1217,7 +1217,7 @@ struct ubifs_info { struct ubifs_mst_node *mst_node; int mst_offs; struct mutex mst_mutex; - int bulk_read_buf_size; + int max_bu_buf_len; int log_lebs; long long log_bytes; -- cgit v1.2.3 From 3477d204658733aa3a87d3ae03b0327c1e599517 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 19 Nov 2008 11:53:15 +0200 Subject: UBIFS: pre-allocate bulk-read buffer To avoid memory allocation failure during bulk-read, pre-allocate a bulk-read buffer, so that if there is only one bulk-reader at a time, it would just use the pre-allocated buffer and would not do any memory allocation. However, if there are more than 1 bulk- reader, then only one reader would use the pre-allocated buffer, while the other reader would allocate the buffer for itself. Signed-off-by: Artem Bityutskiy --- fs/ubifs/file.c | 31 +++++++++++++++++++++--------- fs/ubifs/super.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++--------- fs/ubifs/ubifs.h | 6 ++++++ 3 files changed, 76 insertions(+), 18 deletions(-) diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index 0c5c27d63f6e..2624411d9758 100644 --- a/fs/ubifs/file.c +++ b/fs/ubifs/file.c @@ -811,15 +811,15 @@ static int ubifs_bulk_read(struct page *page) struct ubifs_inode *ui = ubifs_inode(inode); pgoff_t index = page->index, last_page_read = ui->last_page_read; struct bu_info *bu; - int err = 0; + int err = 0, allocated = 0; ui->last_page_read = index; if (!c->bulk_read) return 0; /* - * Bulk-read is protected by ui_mutex, but it is an optimization, so - * don't bother if we cannot lock the mutex. + * Bulk-read is protected by @ui->ui_mutex, but it is an optimization, + * so don't bother if we cannot lock the mutex. */ if (!mutex_trylock(&ui->ui_mutex)) return 0; @@ -840,17 +840,30 @@ static int ubifs_bulk_read(struct page *page) ui->bulk_read = 1; } - bu = kmalloc(sizeof(struct bu_info), GFP_NOFS | __GFP_NOWARN); - if (!bu) - return 0; + /* + * If possible, try to use pre-allocated bulk-read information, which + * is protected by @c->bu_mutex. + */ + if (mutex_trylock(&c->bu_mutex)) + bu = &c->bu; + else { + bu = kmalloc(sizeof(struct bu_info), GFP_NOFS | __GFP_NOWARN); + if (!bu) + goto out_unlock; + + bu->buf = NULL; + allocated = 1; + } - bu->buf = NULL; bu->buf_len = c->max_bu_buf_len; data_key_init(c, &bu->key, inode->i_ino, page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT); - err = ubifs_do_bulk_read(c, bu, page); - kfree(bu); + + if (!allocated) + mutex_unlock(&c->bu_mutex); + else + kfree(bu); out_unlock: mutex_unlock(&ui->ui_mutex); diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 1d511569c035..d80b2aef42b6 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -572,14 +572,6 @@ static int init_constants_early(struct ubifs_info *c) c->max_bu_buf_len = UBIFS_MAX_BULK_READ * UBIFS_MAX_DATA_NODE_SZ; if (c->max_bu_buf_len > c->leb_size) c->max_bu_buf_len = c->leb_size; - if (c->max_bu_buf_len > UBIFS_KMALLOC_OK) { - /* Check if we can kmalloc that much */ - void *try = kmalloc(c->max_bu_buf_len, - GFP_KERNEL | __GFP_NOWARN); - kfree(try); - if (!try) - c->max_bu_buf_len = UBIFS_KMALLOC_OK; - } return 0; } @@ -998,6 +990,34 @@ static void destroy_journal(struct ubifs_info *c) free_buds(c); } +/** + * bu_init - initialize bulk-read information. + * @c: UBIFS file-system description object + */ +static void bu_init(struct ubifs_info *c) +{ + ubifs_assert(c->bulk_read == 1); + + if (c->bu.buf) + return; /* Already initialized */ + +again: + c->bu.buf = kmalloc(c->max_bu_buf_len, GFP_KERNEL | __GFP_NOWARN); + if (!c->bu.buf) { + if (c->max_bu_buf_len > UBIFS_KMALLOC_OK) { + c->max_bu_buf_len = UBIFS_KMALLOC_OK; + goto again; + } + + /* Just disable bulk-read */ + ubifs_warn("Cannot allocate %d bytes of memory for bulk-read, " + "disabling it", c->max_bu_buf_len); + c->mount_opts.bulk_read = 1; + c->bulk_read = 0; + return; + } +} + /** * mount_ubifs - mount UBIFS file-system. * @c: UBIFS file-system description object @@ -1066,6 +1086,13 @@ static int mount_ubifs(struct ubifs_info *c) goto out_free; } + if (c->bulk_read == 1) + bu_init(c); + + /* + * We have to check all CRCs, even for data nodes, when we mount the FS + * (specifically, when we are replaying). + */ c->always_chk_crc = 1; err = ubifs_read_superblock(c); @@ -1296,6 +1323,7 @@ out_cbuf: out_dereg: dbg_failure_mode_deregistration(c); out_free: + kfree(c->bu.buf); vfree(c->ileb_buf); vfree(c->sbuf); kfree(c->bottom_up_buf); @@ -1332,10 +1360,11 @@ static void ubifs_umount(struct ubifs_info *c) kfree(c->cbuf); kfree(c->rcvrd_mst_node); kfree(c->mst_node); + kfree(c->bu.buf); + vfree(c->ileb_buf); vfree(c->sbuf); kfree(c->bottom_up_buf); UBIFS_DBG(vfree(c->dbg_buf)); - vfree(c->ileb_buf); dbg_failure_mode_deregistration(c); } @@ -1633,6 +1662,7 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data) ubifs_err("invalid or unknown remount parameter"); return err; } + if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) { err = ubifs_remount_rw(c); if (err) @@ -1640,6 +1670,14 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data) } else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY)) ubifs_remount_ro(c); + if (c->bulk_read == 1) + bu_init(c); + else { + dbg_gen("disable bulk-read"); + kfree(c->bu.buf); + c->bu.buf = NULL; + } + return 0; } @@ -1730,6 +1768,7 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent) mutex_init(&c->log_mutex); mutex_init(&c->mst_mutex); mutex_init(&c->umount_mutex); + mutex_init(&c->bu_mutex); init_waitqueue_head(&c->cmt_wq); c->buds = RB_ROOT; c->old_idx = RB_ROOT; diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 870b5c479e95..46b172560a06 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -969,7 +969,10 @@ struct ubifs_mount_opts { * @mst_node: master node * @mst_offs: offset of valid master node * @mst_mutex: protects the master node area, @mst_node, and @mst_offs + * * @max_bu_buf_len: maximum bulk-read buffer length + * @bu_mutex: protects the pre-allocated bulk-read buffer and @c->bu + * @bu: pre-allocated bulk-read information * * @log_lebs: number of logical eraseblocks in the log * @log_bytes: log size in bytes @@ -1217,7 +1220,10 @@ struct ubifs_info { struct ubifs_mst_node *mst_node; int mst_offs; struct mutex mst_mutex; + int max_bu_buf_len; + struct mutex bu_mutex; + struct bu_info bu; int log_lebs; long long log_bytes; -- cgit v1.2.3 From 208fbec5bec1de4fce48aab41efde11ba25ab04c Mon Sep 17 00:00:00 2001 From: Cord Walter Date: Thu, 20 Nov 2008 13:46:57 +0000 Subject: axnet_cs / pcnet_cs: moving PCMCIA_DEVICE_PROD_ID for Netgear FA411 Hi, after noticing that my Netgear FA411 (PCMCIA-NIC) [1] stopped working with the release of the 2.6.25 kernel (sidux-version), I checked the respective driver sources and noticed that the pcnet_cs driver bailed out with "use axnet_cs instead" for the Netgear FA411, but axnet_cs doesn't claim this ID. I compiled a kernel with the PCMCIA-ID for the netgear card moved to axnet_cs from pcnet_cs which worked. I then contacted sidux-kernel maintainer Stefan Lippers-Hollmann who turned the info into this patch and integrated it into the kernel: This works for me and AFAIK there were no reports of any breakage for other devices on sidux-support. This looks like a trivial patch, but since I have very limited experience with kernel modifications I might be woefully wrong there. But if there are no side effects of this patch, is it possible to get it into the official kernel? I can provide more detailed information on the affected hardware if necessary. -cord [1] Socket 1 Device 0: [axnet_cs] (bus ID: 1.0) Configuration: state: on Product Name: NETGEAR FA411 Fast Ethernet Identification: manf_id: 0x0149 card_id: 0x0411 function: 6 (network) prod_id(1): "NETGEAR" (0x9aa79dc3) prod_id(2): "FA411" (0x40fad875) prod_id(3): "Fast Ethernet" (0xb4be14e3) prod_id(4): --- (---) From: Stefan Lippers-Hollmann Date: Sat, 1 Nov 2008 23:53:04 +0000 Subject: PCMCIA: move PCMCIA ID for Netgear FA411 from pcnet_cs to axnet_cs: Since kernel 2.6.25, commit 61da96be07ec860e260ca4af0199b9d48d000b80 (pcnet_cs: if AX88190-based card, printk "use axnet_cs instead" message.), pcnet_cs bails out with "use axnet_cs instead" for the Netgear FA411, but axnet_cs doesn't claim this ID. Socket 1 Device 0: [axnet_cs] (bus ID: 1.0) Configuration: state: on Product Name: NETGEAR FA411 Fast Ethernet Identification: manf_id: 0x0149 card_id: 0x0411 function: 6 (network) prod_id(1): "NETGEAR" (0x9aa79dc3) prod_id(2): "FA411" (0x40fad875) prod_id(3): "Fast Ethernet" (0xb4be14e3) prod_id(4): --- (---) Cc: stable [2.6.25, 2.6.26, 2.6.27] Signed-off-by: Stefan Lippers-Hollmann Signed-off-by: Cord Walter Signed-off-by: David S. Miller --- drivers/net/pcmcia/axnet_cs.c | 1 + drivers/net/pcmcia/pcnet_cs.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index b37a498939ae..713091e2b896 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -779,6 +779,7 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2), PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8), PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609), + PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058), diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index e40d6301aa7a..ce486f094492 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1693,7 +1693,6 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), - PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), -- cgit v1.2.3 From 38ae07e44bb2dc86770555a1acafcb937ec74478 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 21 Nov 2008 16:33:25 -0800 Subject: net/hp-plus: fix link errors Fix hp-plus driver link errors. Builds as loadable module and kernel image driver. All drivers that use 8390.o or 8390p.o that will build on i386 with MCA/PCI/EISA/ISA were built successfully both =m and =y. drivers/built-in.o: In function `hpp_open': hp-plus.c:(.text+0xac06c): undefined reference to `eip_interrupt' hp-plus.c:(.text+0xac0d7): undefined reference to `eip_open' drivers/built-in.o: In function `hpp_close': hp-plus.c:(.text+0xac1bb): undefined reference to `eip_close' drivers/built-in.o: In function `hpp_probe1': hp-plus.c:(.init.text+0xa98a): undefined reference to `NS8390p_init' drivers/built-in.o: In function `hp_plus_probe': (.init.text+0xa9fe): undefined reference to `__alloc_eip_netdev' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index f19acf8b9220..017383ad5ec6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -114,7 +114,7 @@ obj-$(CONFIG_EL2) += 3c503.o 8390p.o obj-$(CONFIG_NE2000) += ne.o 8390p.o obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o obj-$(CONFIG_HPLAN) += hp.o 8390p.o -obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o +obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o -- cgit v1.2.3 From 33cf71cee14743185305c61625c4544885055733 Mon Sep 17 00:00:00 2001 From: Petr Tesarik Date: Fri, 21 Nov 2008 16:42:58 -0800 Subject: tcp: Do not use TSO/GSO when there is urgent data This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=12014 Since most (if not all) implementations of TSO and even the in-kernel software GSO do not update the urgent pointer when splitting a large segment, it is necessary to turn off TSO/GSO for all outgoing traffic with the URG pointer set. Looking at tcp_current_mss (and the preceding comment) I even think this was the original intention. However, this approach is insufficient, because TSO/GSO is turned off only for newly created frames, not for frames which were already pending at the arrival of a message with MSG_OOB set. These frames were created when TSO/GSO was enabled, so they may be large, and they will have the urgent pointer set in tcp_transmit_skb(). With this patch, such large packets will be fragmented again before going to the transmit routine. As a side note, at least the following NICs are known to screw up the urgent pointer in the TCP header when doing TSO: Intel 82566MM (PCI ID 8086:1049) Intel 82566DC (PCI ID 8086:104b) Intel 82541GI (PCI ID 8086:1076) Broadcom NetXtreme II BCM5708 (PCI ID 14e4:164c) Signed-off-by: Petr Tesarik Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index ba85d8831893..85b07eba1879 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -722,7 +722,8 @@ static void tcp_queue_skb(struct sock *sk, struct sk_buff *skb) static void tcp_set_skb_tso_segs(struct sock *sk, struct sk_buff *skb, unsigned int mss_now) { - if (skb->len <= mss_now || !sk_can_gso(sk)) { + if (skb->len <= mss_now || !sk_can_gso(sk) || + tcp_urg_mode(tcp_sk(sk))) { /* Avoid the costly divide in the normal * non-TSO case. */ @@ -1163,7 +1164,9 @@ static int tcp_init_tso_segs(struct sock *sk, struct sk_buff *skb, { int tso_segs = tcp_skb_pcount(skb); - if (!tso_segs || (tso_segs > 1 && tcp_skb_mss(skb) != mss_now)) { + if (!tso_segs || + (tso_segs > 1 && (tcp_skb_mss(skb) != mss_now || + tcp_urg_mode(tcp_sk(sk))))) { tcp_set_skb_tso_segs(sk, skb, mss_now); tso_segs = tcp_skb_pcount(skb); } -- cgit v1.2.3 From 7e56b5d698707a9934833c47b24d78fb0bcaf764 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 21 Nov 2008 16:45:22 -0800 Subject: net: Fix memory leak in the proto_register function If the slub allocator is used, kmem_cache_create() may merge two or more kmem_cache's into one but the cache name pointer is not updated and kmem_cache_name() is no longer guaranteed to return the pointer passed to the former function. This patch stores the kmalloc'ed pointers in the corresponding request_sock_ops and timewait_sock_ops structures. Signed-off-by: Catalin Marinas Acked-by: Arnaldo Carvalho de Melo Reviewed-by: Christoph Lameter Signed-off-by: David S. Miller --- include/net/request_sock.h | 1 + include/net/timewait_sock.h | 1 + net/core/sock.c | 31 ++++++++++++------------------- 3 files changed, 14 insertions(+), 19 deletions(-) diff --git a/include/net/request_sock.h b/include/net/request_sock.h index cac811e51f6d..c7190846e128 100644 --- a/include/net/request_sock.h +++ b/include/net/request_sock.h @@ -31,6 +31,7 @@ struct request_sock_ops { int family; int obj_size; struct kmem_cache *slab; + char *slab_name; int (*rtx_syn_ack)(struct sock *sk, struct request_sock *req); void (*send_ack)(struct sock *sk, struct sk_buff *skb, diff --git a/include/net/timewait_sock.h b/include/net/timewait_sock.h index 1e1ee3253fd8..97c3b14da55d 100644 --- a/include/net/timewait_sock.h +++ b/include/net/timewait_sock.h @@ -16,6 +16,7 @@ struct timewait_sock_ops { struct kmem_cache *twsk_slab; + char *twsk_slab_name; unsigned int twsk_obj_size; int (*twsk_unique)(struct sock *sk, struct sock *sktw, void *twp); diff --git a/net/core/sock.c b/net/core/sock.c index 341e39456952..edf7220889a4 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -2035,9 +2035,6 @@ static inline void release_proto_idx(struct proto *prot) int proto_register(struct proto *prot, int alloc_slab) { - char *request_sock_slab_name = NULL; - char *timewait_sock_slab_name; - if (alloc_slab) { prot->slab = kmem_cache_create(prot->name, prot->obj_size, 0, SLAB_HWCACHE_ALIGN, NULL); @@ -2051,12 +2048,12 @@ int proto_register(struct proto *prot, int alloc_slab) if (prot->rsk_prot != NULL) { static const char mask[] = "request_sock_%s"; - request_sock_slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL); - if (request_sock_slab_name == NULL) + prot->rsk_prot->slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL); + if (prot->rsk_prot->slab_name == NULL) goto out_free_sock_slab; - sprintf(request_sock_slab_name, mask, prot->name); - prot->rsk_prot->slab = kmem_cache_create(request_sock_slab_name, + sprintf(prot->rsk_prot->slab_name, mask, prot->name); + prot->rsk_prot->slab = kmem_cache_create(prot->rsk_prot->slab_name, prot->rsk_prot->obj_size, 0, SLAB_HWCACHE_ALIGN, NULL); @@ -2070,14 +2067,14 @@ int proto_register(struct proto *prot, int alloc_slab) if (prot->twsk_prot != NULL) { static const char mask[] = "tw_sock_%s"; - timewait_sock_slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL); + prot->twsk_prot->twsk_slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL); - if (timewait_sock_slab_name == NULL) + if (prot->twsk_prot->twsk_slab_name == NULL) goto out_free_request_sock_slab; - sprintf(timewait_sock_slab_name, mask, prot->name); + sprintf(prot->twsk_prot->twsk_slab_name, mask, prot->name); prot->twsk_prot->twsk_slab = - kmem_cache_create(timewait_sock_slab_name, + kmem_cache_create(prot->twsk_prot->twsk_slab_name, prot->twsk_prot->twsk_obj_size, 0, SLAB_HWCACHE_ALIGN, NULL); @@ -2093,14 +2090,14 @@ int proto_register(struct proto *prot, int alloc_slab) return 0; out_free_timewait_sock_slab_name: - kfree(timewait_sock_slab_name); + kfree(prot->twsk_prot->twsk_slab_name); out_free_request_sock_slab: if (prot->rsk_prot && prot->rsk_prot->slab) { kmem_cache_destroy(prot->rsk_prot->slab); prot->rsk_prot->slab = NULL; } out_free_request_sock_slab_name: - kfree(request_sock_slab_name); + kfree(prot->rsk_prot->slab_name); out_free_sock_slab: kmem_cache_destroy(prot->slab); prot->slab = NULL; @@ -2123,18 +2120,14 @@ void proto_unregister(struct proto *prot) } if (prot->rsk_prot != NULL && prot->rsk_prot->slab != NULL) { - const char *name = kmem_cache_name(prot->rsk_prot->slab); - kmem_cache_destroy(prot->rsk_prot->slab); - kfree(name); + kfree(prot->rsk_prot->slab_name); prot->rsk_prot->slab = NULL; } if (prot->twsk_prot != NULL && prot->twsk_prot->twsk_slab != NULL) { - const char *name = kmem_cache_name(prot->twsk_prot->twsk_slab); - kmem_cache_destroy(prot->twsk_prot->twsk_slab); - kfree(name); + kfree(prot->twsk_prot->twsk_slab_name); prot->twsk_prot->twsk_slab = NULL; } } -- cgit v1.2.3 From 999f6338780fa0577b6581941c697c868d1ec2d3 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Mon, 17 Nov 2008 20:29:03 +0100 Subject: [ARM] pxa/MioA701: fix memory corruption. In the resume bootstrap, the early disable address is wrong. Fix it to RAM address 0xa020b000 instead of 0xa0200000, and make it consistent with RESUME_ENABLE_ADDR in mioa701.c. Signed-off-by: Robert Jarzmik Acked-by: Russell King Signed-off-by: Eric Miao --- arch/arm/mach-pxa/mioa701_bootresume.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S index a647693d9856..324d25a48c85 100644 --- a/arch/arm/mach-pxa/mioa701_bootresume.S +++ b/arch/arm/mach-pxa/mioa701_bootresume.S @@ -24,6 +24,7 @@ ENTRY(mioa701_jumpaddr) 1: mov r0, #0xa0000000 @ Don't suppose memory access works orr r0, r0, #0x00200000 @ even if it's supposed to + orr r0, r0, #0x0000b000 mov r1, #0 str r1, [r0] @ Early disable resume for next boot ldr r0, mioa701_jumpaddr @ (Murphy's Law) -- cgit v1.2.3 From 844c6f6a36984c5fe1bcc2d68a88f2ed212d1eef Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Mon, 17 Nov 2008 20:29:04 +0100 Subject: [ARM] pxa/MioA701: bluetooth resume fix The G3IPL expects the value at RAM address 0xa020b020 to be exactly 1 to setup the bluetooth GPIOs properly. The actual code got a value from gpio_get_value() which was not 1, but a "not equal to 0" integer. Signed-off-by: Robert Jarzmik Acked-by: Russell King Signed-off-by: Eric Miao --- arch/arm/mach-pxa/mioa701.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 0842c531ee4d..782903fe9c6c 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -565,7 +565,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state) u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR); /* Devices prepare suspend */ - is_bt_on = gpio_get_value(GPIO83_BT_ON); + is_bt_on = !!gpio_get_value(GPIO83_BT_ON); pxa2xx_mfp_set_lpm(GPIO83_BT_ON, is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW); -- cgit v1.2.3 From 2ed1cdcf9a83205d1343f29b630abff232eaa72c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 21 Nov 2008 16:59:57 -0800 Subject: irq.h: fix missing/extra kernel-doc Impact: fix kernel-doc build Fix missing & excess irq.h kernel-doc: Warning(include/linux/irq.h:182): No description found for parameter 'irq' Warning(include/linux/irq.h:182): Excess struct/union/enum/typedef member 'affinity_entry' description in 'irq_desc' Signed-off-by: Randy Dunlap Cc: Andrew Morton Signed-off-by: Ingo Molnar --- include/linux/irq.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/irq.h b/include/linux/irq.h index 36b186eb318b..3dddfa703ebd 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -131,7 +131,7 @@ struct irq_chip { /** * struct irq_desc - interrupt descriptor - * + * @irq: interrupt number for this descriptor * @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()] * @chip: low level interrupt hardware access * @msi_desc: MSI descriptor @@ -150,7 +150,6 @@ struct irq_chip { * @cpu: cpu index useful for balancing * @pending_mask: pending rebalanced interrupts * @dir: /proc/irq/ procfs entry - * @affinity_entry: /proc/irq/smp_affinity procfs entry on SMP * @name: flow handler name for /proc/interrupts output */ struct irq_desc { -- cgit v1.2.3 From a1967d64414dab500e86cbbddf8eae6ad2047903 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 21 Nov 2008 11:16:48 -0800 Subject: x86: revert irq number limitation Impact: fix MSIx not enough irq numbers available regression The manual revert of the sparse_irq patches missed to bring the number of possible irqs back to the .27 status. This resulted in a regression when two multichannel network cards were placed in a system with only one IO_APIC - causing the networking driver to not have the right IRQ and the device not coming up. Remove the dynamic allocation logic leftovers and simply return NR_IRQS in probe_nr_irqs() for now. Fixes: http://lkml.org/lkml/2008/11/19/354 Reported-by: Jesper Dangaard Brouer Signed-off-by: Thomas Gleixner Tested-by: Jesper Dangaard Brouer Acked-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic.c | 22 +--------------------- 1 file changed, 1 insertion(+), 21 deletions(-) diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c index c9513e1ff28d..1fec0f9b1508 100644 --- a/arch/x86/kernel/io_apic.c +++ b/arch/x86/kernel/io_apic.c @@ -3608,27 +3608,7 @@ int __init io_apic_get_redir_entries (int ioapic) int __init probe_nr_irqs(void) { - int idx; - int nr = 0; -#ifndef CONFIG_XEN - int nr_min = 32; -#else - int nr_min = NR_IRQS; -#endif - - for (idx = 0; idx < nr_ioapics; idx++) - nr += io_apic_get_redir_entries(idx) + 1; - - /* double it for hotplug and msi and nmi */ - nr <<= 1; - - /* something wrong ? */ - if (nr < nr_min) - nr = nr_min; - if (WARN_ON(nr > NR_IRQS)) - nr = NR_IRQS; - - return nr; + return NR_IRQS; } /* -------------------------------------------------------------------------- -- cgit v1.2.3 From fde5be353e872fe6088d2b1951e56cdfda2042ff Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sun, 23 Nov 2008 12:03:20 +0100 Subject: HID: remove setup mutex, fix possible deadlock It causes recursive locking warning and is unneeded after introduction of STARTED flag. * Resume vs. stop is effectively solved by DISCONNECT flag. * No problem in suspend vs. start -- urb is submitted even after open which is possible after connect which is called after start. * Resume vs. start solved by STARTED flag. * Suspend vs. stop -- no problem in killing urb and timer twice. Reported-by: Alan Stern Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 18 ++---------------- drivers/hid/usbhid/usbhid.h | 1 - 2 files changed, 2 insertions(+), 17 deletions(-) diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index d746bf8284dd..606369ea24ca 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -796,7 +796,6 @@ static int usbhid_start(struct hid_device *hid) if (insize > HID_MAX_BUFFER_SIZE) insize = HID_MAX_BUFFER_SIZE; - mutex_lock(&usbhid->setup); if (hid_alloc_buffers(dev, hid)) { ret = -ENOMEM; goto fail; @@ -876,7 +875,6 @@ static int usbhid_start(struct hid_device *hid) hid_dump_device(hid); set_bit(HID_STARTED, &usbhid->iofl); - mutex_unlock(&usbhid->setup); return 0; @@ -888,7 +886,6 @@ fail: usbhid->urbout = NULL; usbhid->urbctrl = NULL; hid_free_buffers(dev, hid); - mutex_unlock(&usbhid->setup); return ret; } @@ -899,7 +896,6 @@ static void usbhid_stop(struct hid_device *hid) if (WARN_ON(!usbhid)) return; - mutex_lock(&usbhid->setup); clear_bit(HID_STARTED, &usbhid->iofl); spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ set_bit(HID_DISCONNECTED, &usbhid->iofl); @@ -928,7 +924,6 @@ static void usbhid_stop(struct hid_device *hid) usbhid->urbout = NULL; hid_free_buffers(hid_to_usb_dev(hid), hid); - mutex_unlock(&usbhid->setup); } static struct hid_ll_driver usb_hid_driver = { @@ -1016,7 +1011,6 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) hid->driver_data = usbhid; usbhid->hid = hid; - mutex_init(&usbhid->setup); /* needed on suspend/resume */ ret = hid_add_device(hid); if (ret) { @@ -1051,18 +1045,14 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) struct hid_device *hid = usb_get_intfdata (intf); struct usbhid_device *usbhid = hid->driver_data; - mutex_lock(&usbhid->setup); - if (!test_bit(HID_STARTED, &usbhid->iofl)) { - mutex_unlock(&usbhid->setup); + if (!test_bit(HID_STARTED, &usbhid->iofl)) return 0; - } spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ set_bit(HID_SUSPENDED, &usbhid->iofl); spin_unlock_irq(&usbhid->inlock); del_timer_sync(&usbhid->io_retry); usb_kill_urb(usbhid->urbin); - mutex_unlock(&usbhid->setup); dev_dbg(&intf->dev, "suspend\n"); return 0; } @@ -1073,16 +1063,12 @@ static int hid_resume(struct usb_interface *intf) struct usbhid_device *usbhid = hid->driver_data; int status; - mutex_lock(&usbhid->setup); - if (!test_bit(HID_STARTED, &usbhid->iofl)) { - mutex_unlock(&usbhid->setup); + if (!test_bit(HID_STARTED, &usbhid->iofl)) return 0; - } clear_bit(HID_SUSPENDED, &usbhid->iofl); usbhid->retry_delay = 0; status = hid_start_in(hid); - mutex_unlock(&usbhid->setup); dev_dbg(&intf->dev, "resume status %d\n", status); return status; } diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h index 55973ff54008..332abcdf9956 100644 --- a/drivers/hid/usbhid/usbhid.h +++ b/drivers/hid/usbhid/usbhid.h @@ -74,7 +74,6 @@ struct usbhid_device { dma_addr_t outbuf_dma; /* Output buffer dma */ spinlock_t outlock; /* Output fifo spinlock */ - struct mutex setup; unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ struct timer_list io_retry; /* Retry timer */ unsigned long stop_retry; /* Time to give up, in jiffies */ -- cgit v1.2.3 From 86bbc2c235e500957b213e7e64ce2e0ccb8bc131 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 21 Nov 2008 10:21:33 +0000 Subject: xen: pin correct PGD on suspend Impact: fix Xen guest boot failure commit eefb47f6a1e855653d275cb90592a3587ea93a09 ("xen: use spin_lock_nest_lock when pinning a pagetable") changed xen_pgd_walk to walk over mm->pgd rather than taking pgd as an argument. This breaks xen_mm_(un)pin_all() because it makes init_mm.pgd readonly instead of the pgd we are interested in and therefore the pin subsequently fails. (XEN) mm.c:2280:d15 Bad type (saw 00000000e8000001 != exp 0000000060000000) for mfn bc464 (pfn 21ca7) (XEN) mm.c:2665:d15 Error while pinning mfn bc464 [ 14.586913] 1 multicall(s) failed: cpu 0 [ 14.586926] Pid: 14, comm: kstop/0 Not tainted 2.6.28-rc5-x86_32p-xenU-00172-gee2f6cc #200 [ 14.586940] Call Trace: [ 14.586955] [] ? printk+0x18/0x1e [ 14.586972] [] xen_mc_flush+0x163/0x1d0 [ 14.586986] [] __xen_pgd_pin+0xa1/0x110 [ 14.587000] [] ? stop_cpu+0x0/0xf0 [ 14.587015] [] xen_mm_pin_all+0x4b/0x70 [ 14.587029] [] xen_suspend+0x39/0xe0 [ 14.587042] [] ? stop_cpu+0x0/0xf0 [ 14.587054] [] stop_cpu+0x9d/0xf0 [ 14.587067] [] run_workqueue+0x8d/0x150 [ 14.587080] [] ? _spin_unlock_irqrestore+0x23/0x40 [ 14.587094] [] ? prepare_to_wait+0x3a/0x70 [ 14.587107] [] worker_thread+0x88/0xf0 [ 14.587120] [] ? autoremove_wake_function+0x0/0x50 [ 14.587133] [] ? worker_thread+0x0/0xf0 [ 14.587146] [] kthread+0x3c/0x70 [ 14.587157] [] ? kthread+0x0/0x70 [ 14.587170] [] kernel_thread_helper+0x7/0x10 [ 14.587181] call 1/3: op=14 arg=[c0415000] result=0 [ 14.587192] call 2/3: op=14 arg=[e1ca2000] result=0 [ 14.587204] call 3/3: op=26 arg=[c1808860] result=-22 Signed-off-by: Ian Campbell Acked-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 688936044dc9..636ef4caa52d 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -661,12 +661,11 @@ void xen_set_pgd(pgd_t *ptr, pgd_t val) * For 64-bit, we must skip the Xen hole in the middle of the address * space, just after the big x86-64 virtual hole. */ -static int xen_pgd_walk(struct mm_struct *mm, - int (*func)(struct mm_struct *mm, struct page *, - enum pt_level), - unsigned long limit) +static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd, + int (*func)(struct mm_struct *mm, struct page *, + enum pt_level), + unsigned long limit) { - pgd_t *pgd = mm->pgd; int flush = 0; unsigned hole_low, hole_high; unsigned pgdidx_limit, pudidx_limit, pmdidx_limit; @@ -753,6 +752,14 @@ out: return flush; } +static int xen_pgd_walk(struct mm_struct *mm, + int (*func)(struct mm_struct *mm, struct page *, + enum pt_level), + unsigned long limit) +{ + return __xen_pgd_walk(mm, mm->pgd, func, limit); +} + /* If we're using split pte locks, then take the page's lock and return a pointer to it. Otherwise return NULL. */ static spinlock_t *xen_pte_lock(struct page *page, struct mm_struct *mm) @@ -854,7 +861,7 @@ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd) xen_mc_batch(); - if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) { + if (__xen_pgd_walk(mm, pgd, xen_pin_page, USER_LIMIT)) { /* re-enable interrupts for flushing */ xen_mc_issue(0); @@ -998,7 +1005,7 @@ static void __xen_pgd_unpin(struct mm_struct *mm, pgd_t *pgd) PT_PMD); #endif - xen_pgd_walk(mm, xen_unpin_page, USER_LIMIT); + __xen_pgd_walk(mm, pgd, xen_unpin_page, USER_LIMIT); xen_mc_issue(0); } -- cgit v1.2.3 From 3eb77d5116d78cce5b9fa9eb19d012bc636116b6 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 17 Nov 2008 14:50:35 +0100 Subject: KVM: s390: Fix problem state handling in guest sigp handler We can get an exit for instructions starting with 0xae, even if the guest is in userspace. Lets make sure, that the signal processor handler is only called in guest supervisor mode. Otherwise, send a program check. Signed-off-by: Christian Borntraeger Signed-off-by: Avi Kivity --- arch/s390/kvm/sigp.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c index 170392687ce0..2a01b9e02801 100644 --- a/arch/s390/kvm/sigp.c +++ b/arch/s390/kvm/sigp.c @@ -237,6 +237,11 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu) u8 order_code; int rc; + /* sigp in userspace can exit */ + if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) + return kvm_s390_inject_program_int(vcpu, + PGM_PRIVILEGED_OPERATION); + order_code = disp2; if (base2) order_code += vcpu->arch.guest_gprs[base2]; -- cgit v1.2.3 From bd2b3ca7686d9470b1b58df631daa03179486182 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Thu, 20 Nov 2008 11:47:18 +0200 Subject: KVM: VMX: Fix interrupt loss during race with NMI If an interrupt cannot be injected for some reason (say, page fault when fetching the IDT descriptor), the interrupt is marked for reinjection. However, if an NMI is queued at this time, the NMI will be injected instead and the NMI will be lost. Fix by deferring the NMI injection until the interrupt has been injected successfully. Analyzed by Jan Kiszka. Signed-off-by: Avi Kivity --- arch/x86/kvm/vmx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index d06b4dc0e2ea..a4018b01e1f9 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3149,7 +3149,9 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu) if (cpu_has_virtual_nmis()) { if (vcpu->arch.nmi_pending && !vcpu->arch.nmi_injected) { - if (vmx_nmi_enabled(vcpu)) { + if (vcpu->arch.interrupt.pending) { + enable_nmi_window(vcpu); + } else if (vmx_nmi_enabled(vcpu)) { vcpu->arch.nmi_pending = false; vcpu->arch.nmi_injected = true; } else { -- cgit v1.2.3 From 547567c67774d872eb344d21e0f2d7a76eb1e9c5 Mon Sep 17 00:00:00 2001 From: Xiantao Zhang Date: Thu, 20 Nov 2008 10:35:35 +0800 Subject: KVM: ia64: Fix incorrect kbuild CFLAGS override Use CFLAGS_vcpu.o, not EXTRA_CFLAGS, to provide fixed register information to the compiler. Signed-off-by: Xiantao Zhang Signed-off-by: Avi Kivity --- arch/ia64/kvm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile index 3ab4d6d50704..92cef66ca268 100644 --- a/arch/ia64/kvm/Makefile +++ b/arch/ia64/kvm/Makefile @@ -58,7 +58,7 @@ endif kvm-objs := $(common-objs) kvm-ia64.o kvm_fw.o obj-$(CONFIG_KVM) += kvm.o -EXTRA_CFLAGS_vcpu.o += -mfixed-range=f2-f5,f12-f127 +CFLAGS_vcpu.o += -mfixed-range=f2-f5,f12-f127 kvm-intel-objs = vmm.o vmm_ivt.o trampoline.o vcpu.o optvfault.o mmio.o \ vtlb.o process.o #Add link memcpy and memset to avoid possible structure assignment error -- cgit v1.2.3 From ce50b91d0f7b0b90e3960a6f306b4027378c7c27 Mon Sep 17 00:00:00 2001 From: Xiantao Zhang Date: Fri, 21 Nov 2008 10:56:08 +0800 Subject: KVM: ia64: Fix: Use correct calling convention for PAL_VPS_RESUME_HANDLER PAL_VPS_RESUME_HANDLER should use r26 to hold vac fields according to SDM. Signed-off-by: Xiantao Zhang Signed-off-by: Avi Kivity --- arch/ia64/kvm/optvfault.S | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/ia64/kvm/optvfault.S b/arch/ia64/kvm/optvfault.S index 634abad979b5..32254ce9a1bd 100644 --- a/arch/ia64/kvm/optvfault.S +++ b/arch/ia64/kvm/optvfault.S @@ -107,10 +107,10 @@ END(kvm_vps_resume_normal) GLOBAL_ENTRY(kvm_vps_resume_handler) movl r30 = PAL_VPS_RESUME_HANDLER ;; - ld8 r27=[r25] + ld8 r26=[r25] shr r17=r17,IA64_ISR_IR_BIT ;; - dep r27=r17,r27,63,1 // bit 63 of r27 indicate whether enable CFLE + dep r26=r17,r26,63,1 // bit 63 of r26 indicate whether enable CFLE mov pr=r23,-2 br.sptk.many kvm_vps_entry END(kvm_vps_resume_handler) @@ -894,12 +894,15 @@ ENTRY(kvm_resume_to_guest) ;; ld8 r19=[r19] mov b0=r29 - cmp.ne p6,p7 = r0,r0 + mov r27=cr.isr ;; - tbit.z p6,p7 = r19,IA64_PSR_IC_BIT // p1=vpsr.ic + tbit.z p6,p7 = r19,IA64_PSR_IC_BIT // p7=vpsr.ic + shr r27=r27,IA64_ISR_IR_BIT ;; (p6) ld8 r26=[r25] (p7) mov b0=r28 + ;; + (p6) dep r26=r27,r26,63,1 mov pr=r31,-2 br.sptk.many b0 // call pal service ;; -- cgit v1.2.3 From 0c0f40bdbe4ddb48ebecfb5c2b56eeb175a57c45 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Fri, 21 Nov 2008 19:13:58 +0100 Subject: KVM: MMU: fix sync of ptes addressed at owner pagetable During page sync, if a pagetable contains a self referencing pte (that points to the pagetable), the corresponding spte may be marked as writable even though all mappings are supposed to be write protected. Fix by clearing page unsync before syncing individual sptes. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index f1983d9477cd..410ddbc1aa2e 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1038,13 +1038,13 @@ static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) } rmap_write_protect(vcpu->kvm, sp->gfn); + kvm_unlink_unsync_page(vcpu->kvm, sp); if (vcpu->arch.mmu.sync_page(vcpu, sp)) { kvm_mmu_zap_page(vcpu->kvm, sp); return 1; } kvm_mmu_flush_tlb(vcpu); - kvm_unlink_unsync_page(vcpu->kvm, sp); return 0; } -- cgit v1.2.3 From 47fd6f7c94e15eb5f97dd1cbb0427a46b03c8185 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Tue, 18 Nov 2008 02:32:36 +0100 Subject: [ARM] 5335/1: pxa25x_udc: Fix is_vbus_present to return 1 or 0 the use of is_blah() suggests a 1 or 0 return. This assumption is made in pxa25x_udc code such as: dev->vbus = is_vbus_present(); where dev->vbus is a bitfield. This fix allows pxa25x_udc_probe to correctly detect vbus. Other changes were to make its use consistent in the rest of the code. Signed-off-by: Jaya Kumar Signed-off-by: Russell King --- drivers/usb/gadget/pxa25x_udc.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index da6e93c201d2..2dbc0db0b46c 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -141,7 +141,11 @@ static int is_vbus_present(void) if (mach->gpio_vbus) { int value = gpio_get_value(mach->gpio_vbus); - return mach->gpio_vbus_inverted ? !value : value; + + if (mach->gpio_vbus_inverted) + return !value; + else + return !!value; } if (mach->udc_is_connected) return mach->udc_is_connected(); @@ -982,7 +986,7 @@ static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active) struct pxa25x_udc *udc; udc = container_of(_gadget, struct pxa25x_udc, gadget); - udc->vbus = (is_active != 0); + udc->vbus = is_active; DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); pullup(udc); return 0; @@ -1399,12 +1403,8 @@ lubbock_vbus_irq(int irq, void *_dev) static irqreturn_t udc_vbus_irq(int irq, void *_dev) { struct pxa25x_udc *dev = _dev; - int vbus = gpio_get_value(dev->mach->gpio_vbus); - if (dev->mach->gpio_vbus_inverted) - vbus = !vbus; - - pxa25x_udc_vbus_session(&dev->gadget, vbus); + pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present()); return IRQ_HANDLED; } -- cgit v1.2.3 From 7ee1768ddb3075ae3a0801cc2d0ea4195530a7db Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Sun, 23 Nov 2008 21:24:30 +0200 Subject: x86, mmiotrace: fix buffer overrun detection Impact: fix mmiotrace overrun tracing When ftrace framework moved to use the ring buffer facility, the buffer overrun detection was broken after 2.6.27 by commit | commit 3928a8a2d98081d1bc3c0a84a2d70e29b90ecf1c | Author: Steven Rostedt | Date: Mon Sep 29 23:02:41 2008 -0400 | | ftrace: make work with new ring buffer | | This patch ports ftrace over to the new ring buffer. The detection is now fixed by using the ring buffer API. When mmiotrace detects a buffer overrun, it will report the number of lost events. People reading an mmiotrace log must know if something was missed, otherwise the data may not make sense. Signed-off-by: Pekka Paalanen Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace_mmiotrace.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index f28484618ff0..e62cbf78eab6 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -18,12 +18,14 @@ struct header_iter { static struct trace_array *mmio_trace_array; static bool overrun_detected; +static unsigned long prev_overruns; static void mmio_reset_data(struct trace_array *tr) { int cpu; overrun_detected = false; + prev_overruns = 0; tr->time_start = ftrace_now(tr->cpu); for_each_online_cpu(cpu) @@ -128,16 +130,12 @@ static void mmio_close(struct trace_iterator *iter) static unsigned long count_overruns(struct trace_iterator *iter) { - int cpu; unsigned long cnt = 0; -/* FIXME: */ -#if 0 - for_each_online_cpu(cpu) { - cnt += iter->overrun[cpu]; - iter->overrun[cpu] = 0; - } -#endif - (void)cpu; + unsigned long over = ring_buffer_overruns(iter->tr->buffer); + + if (over > prev_overruns) + cnt = over - prev_overruns; + prev_overruns = over; return cnt; } -- cgit v1.2.3 From fb91ee6cf5b8be5360acec577458e29ec7e97e5e Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Sun, 23 Nov 2008 21:24:59 +0200 Subject: tracing, doc: update mmiotrace documentation Impact: update documentation Update to reflect the current state of the tracing framework: - "none" tracer has been replaced by "nop" tracer - tracing_enabled must be toggled when changing buffer size Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- Documentation/tracers/mmiotrace.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt index 5bbbe2096223..cde23b4a12a1 100644 --- a/Documentation/tracers/mmiotrace.txt +++ b/Documentation/tracers/mmiotrace.txt @@ -37,7 +37,7 @@ $ echo mmiotrace > /debug/tracing/current_tracer $ cat /debug/tracing/trace_pipe > mydump.txt & Start X or whatever. $ echo "X is up" > /debug/tracing/trace_marker -$ echo none > /debug/tracing/current_tracer +$ echo nop > /debug/tracing/current_tracer Check for lost events. @@ -66,7 +66,7 @@ which action. It is recommended to place descriptive markers about what you do. Shut down mmiotrace (requires root privileges): -$ echo none > /debug/tracing/current_tracer +$ echo nop > /debug/tracing/current_tracer The 'cat' process exits. If it does not, kill it by issuing 'fg' command and pressing ctrl+c. @@ -81,7 +81,9 @@ are: $ cat /debug/tracing/trace_entries gives you a number. Approximately double this number and write it back, for instance: +$ echo 0 > /debug/tracing/tracing_enabled $ echo 128000 > /debug/tracing/trace_entries +$ echo 1 > /debug/tracing/tracing_enabled Then start again from the top. If you are doing a trace for a driver project, e.g. Nouveau, you should also -- cgit v1.2.3 From ece4af18e07a5cea592ca095844783db4a349cb2 Mon Sep 17 00:00:00 2001 From: Qinghuang Feng Date: Sun, 23 Nov 2008 15:46:55 -0800 Subject: driver/net/*: remove redundant argument comments remove redundant argument comments in files of drivers/net/* Signed-off-by: Qinghuang Feng Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 1 - drivers/net/igb/igb_main.c | 4 ---- drivers/net/ixgbe/ixgbe_main.c | 1 - drivers/net/pcmcia/axnet_cs.c | 1 - drivers/net/sis900.c | 1 - drivers/net/spider_net.c | 4 ---- 6 files changed, 12 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 91795f78c3e4..122539a0e1fe 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -345,7 +345,6 @@ no_buffers: /** * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers * @adapter: address of board private structure - * @rx_ring: pointer to receive ring structure * @cleaned_count: number of buffers to allocate this pass **/ diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1cbae85b1426..20d27e622ec1 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1980,7 +1980,6 @@ static void igb_configure_rx(struct igb_adapter *adapter) /** * igb_free_tx_resources - Free Tx Resources per Queue - * @adapter: board private structure * @tx_ring: Tx descriptor ring for a specific queue * * Free all transmit software resources @@ -2033,7 +2032,6 @@ static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter, /** * igb_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure * @tx_ring: ring to be cleaned **/ static void igb_clean_tx_ring(struct igb_ring *tx_ring) @@ -2080,7 +2078,6 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) /** * igb_free_rx_resources - Free Rx Resources - * @adapter: board private structure * @rx_ring: ring to clean the resources from * * Free all receive software resources @@ -2120,7 +2117,6 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter) /** * igb_clean_rx_ring - Free Rx Buffers per Queue - * @adapter: board private structure * @rx_ring: ring to free buffers from **/ static void igb_clean_rx_ring(struct igb_ring *rx_ring) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 36f2bb666bf7..b2a7ea887125 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1320,7 +1320,6 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) * ixgbe_intr - legacy mode Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure **/ static irqreturn_t ixgbe_intr(int irq, void *data) { diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 713091e2b896..0418045166c3 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -1175,7 +1175,6 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) * ax_interrupt - handle the interrupts from an 8390 * @irq: interrupt number * @dev_id: a pointer to the net_device - * @regs: unused * * Handle the ether interface interrupts. We pull packets from * the 8390 via the card specific functions and fire them at the networking diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index fa3a460f8e2f..8e8337e8b072 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1630,7 +1630,6 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) * sis900_interrupt - sis900 interrupt handler * @irq: the irq number * @dev_instance: the client data object - * @regs: snapshot of processor context * * The interrupt handler does all of the Rx thread work, * and cleans up after the Tx thread diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index b6435d0d71f9..07599b492359 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -672,7 +672,6 @@ write_hash: /** * spider_net_prepare_tx_descr - fill tx descriptor with skb data * @card: card structure - * @descr: descriptor structure to fill out * @skb: packet to use * * returns 0 on success, <0 on failure. @@ -867,7 +866,6 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal) /** * spider_net_kick_tx_dma - enables TX DMA processing * @card: card structure - * @descr: descriptor address to enable TX processing at * * This routine will start the transmit DMA running if * it is not already running. This routine ned only be @@ -1637,7 +1635,6 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg, * spider_net_interrupt - interrupt handler for spider_net * @irq: interrupt number * @ptr: pointer to net_device - * @regs: PU registers * * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no * interrupt found raised by card. @@ -2419,7 +2416,6 @@ spider_net_undo_pci_setup(struct spider_net_card *card) /** * spider_net_setup_pci_dev - sets up the device in terms of PCI operations - * @card: card structure * @pdev: PCI device * * Returns the card structure or NULL if any errors occur -- cgit v1.2.3 From 5147d14e995c097571d383fe1287fb33345a51ee Mon Sep 17 00:00:00 2001 From: Qinghuang Feng Date: Sun, 23 Nov 2008 15:47:24 -0800 Subject: drivers/net/chelsio/sge.c: remove redundant argument comments remove redundant argument comments Signed-off-by: Qinghuang Feng Signed-off-by: David S. Miller --- drivers/net/chelsio/sge.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index d6c7d2aa761b..7092df50ff78 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1035,10 +1035,6 @@ MODULE_PARM_DESC(copybreak, "Receive copy threshold"); * @pdev: the PCI device that received the packet * @fl: the SGE free list holding the packet * @len: the actual packet length, excluding any SGE padding - * @dma_pad: padding at beginning of buffer left by SGE DMA - * @skb_pad: padding to be used if the packet is copied - * @copy_thres: length threshold under which a packet should be copied - * @drop_thres: # of remaining buffers before we start dropping packets * * Get the next packet from a free list and complete setup of the * sk_buff. If the packet is small we make a copy and recycle the -- cgit v1.2.3 From fe875358a6cd01c4599e321dd6dc767b11c42eac Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 24 Nov 2008 13:37:05 +0200 Subject: [MTD] [NAND] OMAP: OneNAND: header file relocation Signed-off-by: Adrian Hunter Signed-off-by: David Woodhouse --- drivers/mtd/onenand/omap2.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index e39b21d3e168..28034ef08a82 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -35,16 +35,16 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include #include -#include +#include -#include +#include #define DRIVER_NAME "omap2-onenand" -- cgit v1.2.3 From 98522a7be97f2b23451342e36c39f412f0461e24 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 18 Nov 2008 06:33:08 -0300 Subject: V4L/DVB (9689): gspca: Memory leak when disconnect while streaming. As a side effect, the sd routine stop0 is called on disconnect. This permits the subdriver to free its resources. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/conex.c | 3 +++ drivers/media/video/gspca/finepix.c | 8 ++++++++ drivers/media/video/gspca/gspca.c | 17 ++++++++--------- drivers/media/video/gspca/gspca.h | 2 +- drivers/media/video/gspca/pac7311.c | 3 +++ drivers/media/video/gspca/spca501.c | 3 +++ drivers/media/video/gspca/spca505.c | 4 ++++ drivers/media/video/gspca/spca561.c | 3 +++ drivers/media/video/gspca/vc032x.c | 3 +++ drivers/media/video/gspca/zc3xx.c | 3 +++ 10 files changed, 39 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index a9d51ba7c57c..de28354ea5ba 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -846,10 +846,13 @@ static int sd_start(struct gspca_dev *gspca_dev) return 0; } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { int retry = 50; + if (!gspca_dev->present) + return; reg_w_val(gspca_dev, 0x0000, 0x00); reg_r(gspca_dev, 0x0002, 1); reg_w_val(gspca_dev, 0x0053, 0x00); diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c index 65d3cbfe6b27..607942fd7970 100644 --- a/drivers/media/video/gspca/finepix.c +++ b/drivers/media/video/gspca/finepix.c @@ -276,6 +276,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev) /* Stop the state machine */ if (dev->state != FPIX_NOP) wait_for_completion(&dev->can_close); +} + +/* called on streamoff with alt 0 and disconnect */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; usb_free_urb(dev->control_urb); dev->control_urb = NULL; @@ -385,6 +391,7 @@ static int sd_start(struct gspca_dev *gspca_dev) error: /* Free the ressources */ sd_stopN(gspca_dev); + sd_stop0(gspca_dev); return ret; } @@ -425,6 +432,7 @@ static const struct sd_desc sd_desc = { .init = sd_init, .start = sd_start, .stopN = sd_stopN, + .stop0 = sd_stop0, }; /* -- device connect -- */ diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index e48fbfc8ad05..f28d2f4aceac 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -646,15 +646,14 @@ static void gspca_stream_off(struct gspca_dev *gspca_dev) { gspca_dev->streaming = 0; atomic_set(&gspca_dev->nevent, 0); - if (gspca_dev->present) { - if (gspca_dev->sd_desc->stopN) - gspca_dev->sd_desc->stopN(gspca_dev); - destroy_urbs(gspca_dev); - gspca_set_alt0(gspca_dev); - if (gspca_dev->sd_desc->stop0) - gspca_dev->sd_desc->stop0(gspca_dev); - PDEBUG(D_STREAM, "stream off OK"); - } + if (gspca_dev->present + && gspca_dev->sd_desc->stopN) + gspca_dev->sd_desc->stopN(gspca_dev); + destroy_urbs(gspca_dev); + gspca_set_alt0(gspca_dev); + if (gspca_dev->sd_desc->stop0) + gspca_dev->sd_desc->stop0(gspca_dev); + PDEBUG(D_STREAM, "stream off OK"); } static void gspca_set_default_mode(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 1d9dc90b4791..c35d7b97112f 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -97,7 +97,7 @@ struct sd_desc { cam_pkt_op pkt_scan; /* optional operations */ cam_v_op stopN; /* called on stream off - main alt */ - cam_v_op stop0; /* called on stream off - alt 0 */ + cam_v_op stop0; /* called on stream off & disconnect - alt 0 */ cam_v_op dq_callback; /* called when a frame has been dequeued */ cam_jpg_op get_jcomp; cam_jpg_op set_jcomp; diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index e5ff9a6199ef..fbd45e235d97 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -749,10 +749,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */ } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (!gspca_dev->present) + return; if (sd->sensor == SENSOR_PAC7302) { reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x78, 0x40); diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index b742f260c7ca..e29954c1c38c 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -2022,8 +2022,11 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x01, 0x00); } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { + if (!gspca_dev->present) + return; reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00); } diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index b345749213cf..895b9fe4018c 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -742,8 +742,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_write(gspca_dev->dev, 0x02, 0x00, 0x00); } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { + if (!gspca_dev->present) + return; + /* This maybe reset or power control */ reg_write(gspca_dev->dev, 0x03, 0x03, 0x20); reg_write(gspca_dev->dev, 0x03, 0x01, 0x0); diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 020a03c466c1..c3de4e44123d 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -766,10 +766,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev) } } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (!gspca_dev->present) + return; if (sd->chip_revision == Rev012A) { reg_w_val(gspca_dev->dev, 0x8118, 0x29); reg_w_val(gspca_dev->dev, 0x8114, 0x08); diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index be46d9232540..17af353ddd1c 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -1633,10 +1633,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w(dev, 0xa0, 0x09, 0xb003); } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; + if (!gspca_dev->present) + return; reg_w(dev, 0x89, 0xffff, 0xffff); } diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 8b3101d347c3..0befacf49855 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7336,10 +7336,13 @@ static int sd_start(struct gspca_dev *gspca_dev) return 0; } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (!gspca_dev->present) + return; send_unknown(gspca_dev->dev, sd->sensor); } -- cgit v1.2.3 From 5c4fa002b1c7b40f65fa911ae17a823ec9e26ab2 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 18 Nov 2008 15:52:31 -0300 Subject: V4L/DVB (9690): gspca: Lock the subdrivers via module_get/put. The previous subdriver protection against rmmod was done via the file operations table in the device descriptor. On device disconnection while streaming, the device structure was freed at close time, and the module_put still used the module name in the freed area. Now, explicit module get/put are done on open and close. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 13 ++++++++++--- drivers/media/video/gspca/gspca.h | 2 +- 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index f28d2f4aceac..a565f3764837 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -874,6 +874,13 @@ static int dev_open(struct inode *inode, struct file *file) ret = -EBUSY; goto out; } + + /* protect the subdriver against rmmod */ + if (!try_module_get(gspca_dev->module)) { + ret = -ENODEV; + goto out; + } + gspca_dev->users++; /* one more user */ @@ -920,6 +927,7 @@ static int dev_close(struct inode *inode, struct file *file) gspca_dev->memory = GSPCA_MEMORY_NO; } file->private_data = NULL; + module_put(gspca_dev->module); mutex_unlock(&gspca_dev->queue_lock); PDEBUG(D_STREAM, "close done"); @@ -1870,9 +1878,8 @@ int gspca_dev_probe(struct usb_interface *intf, /* init video stuff */ memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template); gspca_dev->vdev.parent = &dev->dev; - memcpy(&gspca_dev->fops, &dev_fops, sizeof gspca_dev->fops); - gspca_dev->vdev.fops = &gspca_dev->fops; - gspca_dev->fops.owner = module; /* module protection */ + gspca_dev->vdev.fops = &dev_fops; + gspca_dev->module = module; gspca_dev->present = 1; ret = video_register_device(&gspca_dev->vdev, VFL_TYPE_GRABBER, diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index c35d7b97112f..2ae1ad7c1483 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -121,7 +121,7 @@ struct gspca_frame { struct gspca_dev { struct video_device vdev; /* !! must be the first item */ - struct file_operations fops; + struct module *module; /* subdriver handling the device */ struct usb_device *dev; struct kref kref; struct file *capt_file; /* file doing video capture */ -- cgit v1.2.3 From e07a1d8ab20a059fefbfd1558db43701bca560d7 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 19 Nov 2008 06:37:53 -0300 Subject: V4L/DVB (9691): gspca: Move the video device to a separate area. The video device was part of the gspca device. On device disconnection while streaming, the device structure is freed at close time. In this case, the remaining close job on the video device run out of allocated memory. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 28 +++++++++++++--------------- drivers/media/video/gspca/gspca.h | 2 +- 2 files changed, 14 insertions(+), 16 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index a565f3764837..748a87e82e44 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -862,7 +862,7 @@ static int dev_open(struct inode *inode, struct file *file) int ret; PDEBUG(D_STREAM, "%s open", current->comm); - gspca_dev = (struct gspca_dev *) video_devdata(file); + gspca_dev = video_drvdata(file); if (mutex_lock_interruptible(&gspca_dev->queue_lock)) return -ERESTARTSYS; if (!gspca_dev->present) { @@ -890,10 +890,10 @@ static int dev_open(struct inode *inode, struct file *file) #ifdef GSPCA_DEBUG /* activate the v4l2 debug */ if (gspca_debug & D_V4L2) - gspca_dev->vdev.debug |= V4L2_DEBUG_IOCTL + gspca_dev->vdev->debug |= V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; else - gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL + gspca_dev->vdev->debug &= ~(V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG); #endif ret = 0; @@ -1755,11 +1755,6 @@ out: return ret; } -static void dev_release(struct video_device *vfd) -{ - /* nothing */ -} - static struct file_operations dev_fops = { .owner = THIS_MODULE, .open = dev_open, @@ -1807,7 +1802,7 @@ static struct video_device gspca_template = { .name = "gspca main driver", .fops = &dev_fops, .ioctl_ops = &dev_ioctl_ops, - .release = dev_release, /* mandatory */ + .release = video_device_release, .minor = -1, }; @@ -1876,16 +1871,18 @@ int gspca_dev_probe(struct usb_interface *intf, init_waitqueue_head(&gspca_dev->wq); /* init video stuff */ - memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template); - gspca_dev->vdev.parent = &dev->dev; - gspca_dev->vdev.fops = &dev_fops; + gspca_dev->vdev = video_device_alloc(); + memcpy(gspca_dev->vdev, &gspca_template, sizeof gspca_template); + gspca_dev->vdev->parent = &dev->dev; gspca_dev->module = module; gspca_dev->present = 1; - ret = video_register_device(&gspca_dev->vdev, + video_set_drvdata(gspca_dev->vdev, gspca_dev); + ret = video_register_device(gspca_dev->vdev, VFL_TYPE_GRABBER, video_nr); if (ret < 0) { err("video_register_device err %d", ret); + video_device_release(gspca_dev->vdev); goto out; } @@ -1893,7 +1890,8 @@ int gspca_dev_probe(struct usb_interface *intf, PDEBUG(D_PROBE, "probe ok"); return 0; out: - kref_put(&gspca_dev->kref, gspca_delete); + kfree(gspca_dev->usb_buf); + kfree(gspca_dev); return ret; } EXPORT_SYMBOL(gspca_dev_probe); @@ -1911,7 +1909,7 @@ void gspca_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); /* We don't want people trying to open up the device */ - video_unregister_device(&gspca_dev->vdev); + video_unregister_device(gspca_dev->vdev); gspca_dev->present = 0; gspca_dev->streaming = 0; diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 2ae1ad7c1483..d25e8d69373b 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -120,7 +120,7 @@ struct gspca_frame { }; struct gspca_dev { - struct video_device vdev; /* !! must be the first item */ + struct video_device *vdev; struct module *module; /* subdriver handling the device */ struct usb_device *dev; struct kref kref; -- cgit v1.2.3 From 7a8f4ccfd572a11f609439dc6a75165b441641bc Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 21 Nov 2008 17:14:37 -0300 Subject: V4L/DVB (9732): sms1xxx: use new firmware for Hauppauge WinTV MiniStick New firmware image brings enhanced tuning performance. Firmware is available for download at the following location: http://www.steventoth.net/linux/sms1xxx Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/sms-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c index 6f9b77360440..e98d6caf2c23 100644 --- a/drivers/media/dvb/siano/sms-cards.c +++ b/drivers/media/dvb/siano/sms-cards.c @@ -95,7 +95,7 @@ static struct sms_board sms_boards[] = { [SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = { .name = "Hauppauge WinTV MiniStick", .type = SMS_NOVA_B0, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw", + .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", }, }; -- cgit v1.2.3 From 50f3beb50abe0cc0228363af804e50e710b3e5b0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 24 Nov 2008 08:45:57 -0300 Subject: V4L/DVB (9742): em28xx-alsa: implement another locking schema Instead of using a spinlock, it is better to call the proper pcm stream locking schema. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 37 ++++++++++++++++++++----------- 1 file changed, 24 insertions(+), 13 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index ac3292d7646c..dfac2e042a52 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -75,7 +75,9 @@ static void em28xx_audio_isocirq(struct urb *urb) struct em28xx *dev = urb->context; int i; unsigned int oldptr; +#ifdef NO_PCM_LOCK unsigned long flags; +#endif int period_elapsed = 0; int status; unsigned char *cp; @@ -96,9 +98,26 @@ static void em28xx_audio_isocirq(struct urb *urb) if (!length) continue; +#ifdef NO_PCM_LOCK spin_lock_irqsave(&dev->adev->slock, flags); - +#endif oldptr = dev->adev->hwptr_done_capture; + if (oldptr + length >= runtime->buffer_size) { + unsigned int cnt = + runtime->buffer_size - oldptr; + memcpy(runtime->dma_area + oldptr * stride, cp, + cnt * stride); + memcpy(runtime->dma_area, cp + cnt * stride, + length * stride - cnt * stride); + } else { + memcpy(runtime->dma_area + oldptr * stride, cp, + length * stride); + } + +#ifndef NO_PCM_LOCK + snd_pcm_stream_lock(substream); +#endif + dev->adev->hwptr_done_capture += length; if (dev->adev->hwptr_done_capture >= runtime->buffer_size) @@ -113,19 +132,11 @@ static void em28xx_audio_isocirq(struct urb *urb) period_elapsed = 1; } +#ifdef NO_PCM_LOCK spin_unlock_irqrestore(&dev->adev->slock, flags); - - if (oldptr + length >= runtime->buffer_size) { - unsigned int cnt = - runtime->buffer_size - oldptr; - memcpy(runtime->dma_area + oldptr * stride, cp, - cnt * stride); - memcpy(runtime->dma_area, cp + cnt * stride, - length * stride - cnt * stride); - } else { - memcpy(runtime->dma_area + oldptr * stride, cp, - length * stride); - } +#else + snd_pcm_stream_unlock(substream); +#endif } if (period_elapsed) snd_pcm_period_elapsed(substream); -- cgit v1.2.3 From eccdaeafaea3ed115068ba55d01f22e486e5437d Mon Sep 17 00:00:00 2001 From: Petr Tesarik Date: Mon, 24 Nov 2008 15:46:31 +0100 Subject: posix-cpu-timers: fix clock_gettime with CLOCK_PROCESS_CPUTIME_ID Since CLOCK_PROCESS_CPUTIME_ID is in fact translated to -6, the switch statement in cpu_clock_sample_group() must first mask off the irrelevant bits, similar to cpu_clock_sample(). Signed-off-by: Petr Tesarik Signed-off-by: Thomas Gleixner -- posix-cpu-timers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- kernel/posix-cpu-timers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 895337b16a24..4e5288a831de 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -311,7 +311,7 @@ static int cpu_clock_sample_group(const clockid_t which_clock, struct task_cputime cputime; thread_group_cputime(p, &cputime); - switch (which_clock) { + switch (CPUCLOCK_WHICH(which_clock)) { default: return -EINVAL; case CPUCLOCK_PROF: -- cgit v1.2.3 From 2c5e76158fcea6e3b9536a74efa7b5e2e846d374 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 20 Nov 2008 14:36:17 -0600 Subject: nfsd: clean up grace period on early exit If nfsd was shut down before the grace period ended, we could end up with a freed object still on grace_list. Thanks to Jeff Moyer for reporting the resulting list corruption warnings. Signed-off-by: J. Bruce Fields Tested-by: Jeff Moyer --- fs/lockd/svc.c | 1 + fs/nfsd/nfs4state.c | 1 + 2 files changed, 2 insertions(+) diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c index c631a83931ce..56b076736b56 100644 --- a/fs/lockd/svc.c +++ b/fs/lockd/svc.c @@ -181,6 +181,7 @@ lockd(void *vrqstp) } flush_signals(current); cancel_delayed_work_sync(&grace_period_end); + locks_end_grace(&lockd_manager); if (nlmsvc_ops) nlmsvc_invalidate_all(); nlm_shutdown_hosts(); diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index b0bebc552a11..1a052ac2bde9 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -3261,6 +3261,7 @@ nfs4_state_shutdown(void) { cancel_rearming_delayed_workqueue(laundry_wq, &laundromat_work); destroy_workqueue(laundry_wq); + locks_end_grace(&nfsd4_manager); nfs4_lock_state(); nfs4_release_reclaim(); __nfs4_state_shutdown(); -- cgit v1.2.3 From 2da2c21d7508d34bc6d600df665d84871b65d2b9 Mon Sep 17 00:00:00 2001 From: Tom Tucker Date: Sun, 23 Nov 2008 09:58:08 -0600 Subject: Add a reference to sunrpc in svc_addsock The svc_addsock function adds transport instances without taking a reference on the sunrpc.ko module, however, the generic transport destruction code drops a reference when a transport instance is destroyed. Add a try_module_get call to the svc_addsock function for transport instances added by this function. Signed-off-by: Tom Tucker Signed-off-by: J. Bruce Fields Tested-by: Jeff Moyer --- net/sunrpc/svcsock.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 95293f549e9c..a1951dcc5776 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -1183,7 +1183,11 @@ int svc_addsock(struct svc_serv *serv, else if (so->state > SS_UNCONNECTED) err = -EISCONN; else { - svsk = svc_setup_socket(serv, so, &err, SVC_SOCK_DEFAULTS); + if (!try_module_get(THIS_MODULE)) + err = -ENOENT; + else + svsk = svc_setup_socket(serv, so, &err, + SVC_SOCK_DEFAULTS); if (svsk) { struct sockaddr_storage addr; struct sockaddr *sin = (struct sockaddr *)&addr; @@ -1196,7 +1200,8 @@ int svc_addsock(struct svc_serv *serv, spin_unlock_bh(&serv->sv_lock); svc_xprt_received(&svsk->sk_xprt); err = 0; - } + } else + module_put(THIS_MODULE); } if (err) { sockfd_put(so); -- cgit v1.2.3 From 8ec2e24356e63dc298c6040557faf396410907ac Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 20 Nov 2008 17:26:36 -0800 Subject: MIPS: Make BUG() __noreturn. Often we do things like put BUG() in the default clause of a case statement. Since it was not declared __noreturn, this could sometimes lead to bogus compiler warnings that variables were used uninitialized. There is a small problem in that we have to put a magic while(1); loop to fool GCC into really thinking it is noreturn. This makes the new BUG() function 3 instructions long instead of just 1, but I think it is worth it as it is now unnecessary to do extra work to silence the 'used uninitialized' warnings. I also re-wrote BUG_ON so that if it is given a constant condition, it just does BUG() instead of loading a constant value in to a register and testing it. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/bug.h | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h index 7eb63de808bc..08ea46863fe5 100644 --- a/arch/mips/include/asm/bug.h +++ b/arch/mips/include/asm/bug.h @@ -7,20 +7,31 @@ #include -#define BUG() \ -do { \ - __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \ -} while (0) +static inline void __noreturn BUG(void) +{ + __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); + /* Fool GCC into thinking the function doesn't return. */ + while (1) + ; +} #define HAVE_ARCH_BUG #if (_MIPS_ISA > _MIPS_ISA_MIPS1) -#define BUG_ON(condition) \ -do { \ - __asm__ __volatile__("tne $0, %0, %1" \ - : : "r" (condition), "i" (BRK_BUG)); \ -} while (0) +static inline void __BUG_ON(unsigned long condition) +{ + if (__builtin_constant_p(condition)) { + if (condition) + BUG(); + else + return; + } + __asm__ __volatile__("tne $0, %0, %1" + : : "r" (condition), "i" (BRK_BUG)); +} + +#define BUG_ON(C) __BUG_ON((unsigned long)(C)) #define HAVE_ARCH_BUG_ON -- cgit v1.2.3 From e4625eb826de4f6774ee602c442ba23b686bdcc7 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 24 Nov 2008 10:32:46 -0600 Subject: nfsd: use of unitialized list head on error exit in nfs4recover.c Thanks to Matthew Dodd for this bug report: A file label issue while running SELinux in MLS mode provoked the following bug, which is a result of use before init on a 'struct list_head'. In nfsd4_list_rec_dir() if the call to dentry_open() fails the 'goto out' skips INIT_LIST_HEAD() which results in the normally improbable case where list_entry() returns NULL. Trace follows. NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory SELinux: Context unconfined_t:object_r:var_lib_nfs_t:s0 is not valid (left unmapped). type=1400 audit(1227298063.609:282): avc: denied { read } for pid=1890 comm="rpc.nfsd" name="v4recovery" dev=dm-0 ino=148726 scontext=system_u:system_r:nfsd_t:s0-s15:c0.c1023 tcontext=system_u:object_r:unlabeled_t:s15:c0.c1023 tclass=dir BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [] list_del+0x6/0x60 *pde = 0d9ce067 *pte = 00000000 Oops: 0000 [#1] SMP Modules linked in: nfsd lockd nfs_acl auth_rpcgss exportfs autofs4 sunrpc ipv6 dm_multipath scsi_dh ppdev parport_pc sg parport floppy ata_piix pata_acpi ata_generic libata pcnet32 i2c_piix4 mii pcspkr i2c_core dm_snapshot dm_zero dm_mirror dm_log dm_mod BusLogic sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode] Pid: 1890, comm: rpc.nfsd Not tainted (2.6.27.5-37.fc9.i686 #1) EIP: 0060:[] EFLAGS: 00010217 CPU: 0 EIP is at list_del+0x6/0x60 EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: cd99e480 ESI: cf9caed8 EDI: 00000000 EBP: cf9caebc ESP: cf9caeb8 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process rpc.nfsd (pid: 1890, ti=cf9ca000 task=cf4de580 task.ti=cf9ca000) Stack: 00000000 cf9caef0 d0a9f139 c0496d04 d0a9f217 fffffff3 00000000 00000000 00000000 00000000 cf32b220 00000000 00000008 00000801 cf9caefc d0a9f193 00000000 cf9caf08 d0a9b6ea 00000000 cf9caf1c d0a874f2 cf9c3004 00000008 Call Trace: [] ? nfsd4_list_rec_dir+0xf3/0x13a [nfsd] [] ? do_path_lookup+0x12d/0x175 [] ? load_recdir+0x0/0x26 [nfsd] [] ? nfsd4_recdir_load+0x13/0x34 [nfsd] [] ? nfs4_state_start+0x2a/0xc5 [nfsd] [] ? nfsd_svc+0x51/0xff [nfsd] [] ? write_svc+0x0/0x1e [nfsd] [] ? write_svc+0x1b/0x1e [nfsd] [] ? nfsctl_transaction_write+0x3a/0x61 [nfsd] [] ? sys_nfsservctl+0x116/0x154 [] ? putname+0x24/0x2f [] ? putname+0x24/0x2f [] ? do_sys_open+0xad/0xb7 [] ? filp_close+0x50/0x5a [] ? sys_open+0x1e/0x26 [] ? syscall_call+0x7/0xb [] ? init_cyrix+0x185/0x490 ======================= Code: 75 e1 8b 53 08 8d 4b 04 8d 46 04 e8 75 00 00 00 8b 53 10 8d 4b 0c 8d 46 0c e8 67 00 00 00 5b 5e 5f 5d c3 90 90 55 89 e5 53 89 c3 <8b> 40 04 8b 00 39 d8 74 16 50 53 68 3e d6 6f c0 6a 30 68 78 d6 EIP: [] list_del+0x6/0x60 SS:ESP 0068:cf9caeb8 ---[ end trace a89c4ad091c4ad53 ]--- Cc: Matthew N. Dodd Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4recover.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c index bb93946ace22..b79ec930d9f1 100644 --- a/fs/nfsd/nfs4recover.c +++ b/fs/nfsd/nfs4recover.c @@ -225,12 +225,12 @@ nfsd4_list_rec_dir(struct dentry *dir, recdir_func *f) return 0; nfs4_save_user(&uid, &gid); + INIT_LIST_HEAD(dentries); filp = dentry_open(dget(dir), mntget(rec_dir.mnt), O_RDONLY); status = PTR_ERR(filp); if (IS_ERR(filp)) goto out; - INIT_LIST_HEAD(dentries); status = vfs_readdir(filp, nfsd4_build_dentrylist, &dla); fput(filp); while (!list_empty(dentries)) { -- cgit v1.2.3 From 8442c87d2f6c73cdc9a391e4dd9390523d242bda Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 23 Nov 2008 22:35:57 -0500 Subject: Input: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playback ml_ff_playback() uses spin_(un)lock_bh. However this function is called with interrupts disabled from erase_effect() in drivers/input/ff-core.c:196. This is not permitted, and will result in a WARN_ON in the bottom half handling code. This patch changes this function to just use spin_lock_irqsave() instead, solving the problem and simplifying the locking logic. This was reported as entry #106559 in kerneloops.org Reported-by: kerneloops.org Signed-off-by: Arjan van de Ven Signed-off-by: Dmitry Torokhov --- drivers/input/ff-memless.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index 6790e975a98c..bc4e40f3ede7 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -397,8 +397,9 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) { struct ml_device *ml = dev->ff->private; struct ml_effect_state *state = &ml->states[effect_id]; + unsigned long flags; - spin_lock_bh(&ml->timer_lock); + spin_lock_irqsave(&ml->timer_lock, flags); if (value > 0) { debug("initiated play"); @@ -424,7 +425,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) ml_play_effects(ml); } - spin_unlock_bh(&ml->timer_lock); + spin_unlock_irqrestore(&ml->timer_lock, flags); return 0; } -- cgit v1.2.3 From a8d82d9b950213b66b22c9e7c63a058841de2394 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 24 Nov 2008 12:51:55 -0500 Subject: NLM: client-side nlm_lookup_host() should avoid matching on srcaddr Since commit c98451bd, the loop in nlm_lookup_host() unconditionally compares the host's h_srcaddr field to the incoming source address. For client-side nlm_host entries, both are always AF_UNSPEC, so this check is unnecessary. Since commit 781b61a6, which added support for AF_INET6 addresses to nlm_cmp_addr(), nlm_cmp_addr() now returns FALSE for AF_UNSPEC addresses, which causes nlm_lookup_host() to create a fresh nlm_host entry every time it is called on the client. These extra entries will eventually expire once the server is unmounted, so the impact of this regression, introduced with lockd IPv6 support in 2.6.28, should be minor. We could fix this by adding an arm in nlm_cmp_addr() for AF_UNSPEC addresses, but really, nlm_lookup_host() shouldn't be matching on the srcaddr field for client-side nlm_host lookups. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- fs/lockd/host.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/lockd/host.c b/fs/lockd/host.c index 9fd8889097b7..70fc63a1727b 100644 --- a/fs/lockd/host.c +++ b/fs/lockd/host.c @@ -167,7 +167,8 @@ static struct nlm_host *nlm_lookup_host(struct nlm_lookup_host_info *ni) continue; if (host->h_server != ni->server) continue; - if (!nlm_cmp_addr(nlm_srcaddr(host), ni->src_sap)) + if (ni->server && + !nlm_cmp_addr(nlm_srcaddr(host), ni->src_sap)) continue; /* Move to head of hash chain. */ -- cgit v1.2.3 From 7c463586427bbbad726ba561bae4ba5acada2481 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 4 Nov 2008 02:03:27 -0800 Subject: drm/i915: Manage PIPESTAT to control vblank interrupts instead of IMR. The pipestat fields affect reporting of all vblank-related interrupts, so we have to reset them during the irq_handler, and while enabling vblank interrupts. Otherwise, if a pipe status field had been set to non-zero before enabling reporting, we would never see an interrupt again. This patch adds i915_enable_pipestat and i915_disable_pipestat to abstract out the steps needed to change the reported interrupts. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_drv.h | 8 ++ drivers/gpu/drm/i915/i915_irq.c | 211 ++++++++++++++++------------------- drivers/gpu/drm/i915/i915_opregion.c | 18 ++- 3 files changed, 115 insertions(+), 122 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ef1c0b8f8d07..ed1edcf8704f 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -132,6 +132,7 @@ typedef struct drm_i915_private { int user_irq_refcount; /** Cached value of IMR to avoid reads in updating the bitfield */ u32 irq_mask_reg; + u32 pipestat[2]; int tex_lru_log_granularity; int allow_batchbuffer; @@ -446,6 +447,13 @@ extern int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv); extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask); +void +i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask); + +void +i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask); + + /* i915_mem.c */ extern int i915_mem_alloc(struct drm_device *dev, void *data, struct drm_file *file_priv); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 82752d6177a4..ca3ed1833908 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -33,11 +33,23 @@ #define MAX_NOPID ((u32)~0) -/** These are the interrupts used by the driver */ -#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \ - I915_ASLE_INTERRUPT | \ - I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) +/** + * Interrupts that are always left unmasked. + * + * Since pipe events are edge-triggered from the PIPESTAT register to IIR, + * we leave them always unmasked in IMR and then control enabling them through + * PIPESTAT alone. + */ +#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \ + I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) + +/** Interrupts that we mask and unmask at runtime. */ +#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT) + +/** These are all of the interrupts used by the driver */ +#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \ + I915_INTERRUPT_ENABLE_VAR) void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask) @@ -59,6 +71,41 @@ i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask) } } +static inline u32 +i915_pipestat(int pipe) +{ + if (pipe == 0) + return PIPEASTAT; + if (pipe == 1) + return PIPEBSTAT; + BUG_ON(1); +} + +void +i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) +{ + if ((dev_priv->pipestat[pipe] & mask) != mask) { + u32 reg = i915_pipestat(pipe); + + dev_priv->pipestat[pipe] |= mask; + /* Enable the interrupt, clear any pending status */ + I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16)); + (void) I915_READ(reg); + } +} + +void +i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) +{ + if ((dev_priv->pipestat[pipe] & mask) != 0) { + u32 reg = i915_pipestat(pipe); + + dev_priv->pipestat[pipe] &= ~mask; + I915_WRITE(reg, dev_priv->pipestat[pipe]); + (void) I915_READ(reg); + } +} + /** * i915_pipe_enabled - check if a pipe is enabled * @dev: DRM device @@ -122,9 +169,11 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 iir; - u32 pipea_stats, pipeb_stats; + u32 pipea_stats = 0, pipeb_stats = 0; int vblank = 0; + unsigned long irqflags; + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); atomic_inc(&dev_priv->irq_received); if (dev->pdev->msi_enabled) @@ -136,44 +185,20 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) I915_WRITE(IMR, dev_priv->irq_mask_reg); (void) I915_READ(IMR); } + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); return IRQ_NONE; } /* - * Clear the PIPE(A|B)STAT regs before the IIR otherwise - * we may get extra interrupts. + * Clear the PIPE(A|B)STAT regs before the IIR */ if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) { pipea_stats = I915_READ(PIPEASTAT); - if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A)) - pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| - PIPE_VBLANK_INTERRUPT_STATUS)) { - vblank++; - drm_handle_vblank(dev, 0); - } - I915_WRITE(PIPEASTAT, pipea_stats); } + if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) { pipeb_stats = I915_READ(PIPEBSTAT); - /* Ack the event */ - I915_WRITE(PIPEBSTAT, pipeb_stats); - - /* The vblank interrupt gets enabled even if we didn't ask for - it, so make sure it's shut down again */ - if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B)) - pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| - PIPE_VBLANK_INTERRUPT_STATUS)) { - vblank++; - drm_handle_vblank(dev, 1); - } - - if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) - opregion_asle_intr(dev); I915_WRITE(PIPEBSTAT, pipeb_stats); } @@ -182,6 +207,8 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) I915_WRITE(IMR, dev_priv->irq_mask_reg); (void) I915_READ(IIR); /* Flush posted writes */ + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); + if (dev_priv->sarea_priv) dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); @@ -191,7 +218,18 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) DRM_WAKEUP(&dev_priv->irq_queue); } - if (iir & I915_ASLE_INTERRUPT) + if (pipea_stats & I915_VBLANK_INTERRUPT_STATUS) { + vblank++; + drm_handle_vblank(dev, 0); + } + + if (pipeb_stats & I915_VBLANK_INTERRUPT_STATUS) { + vblank++; + drm_handle_vblank(dev, 1); + } + + if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) || + (iir & I915_ASLE_INTERRUPT)) opregion_asle_intr(dev); return IRQ_HANDLED; @@ -330,48 +368,16 @@ int i915_irq_wait(struct drm_device *dev, void *data, int i915_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 pipestat_reg = 0; - u32 pipestat; - u32 interrupt = 0; unsigned long irqflags; - switch (pipe) { - case 0: - pipestat_reg = PIPEASTAT; - interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; - break; - case 1: - pipestat_reg = PIPEBSTAT; - interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; - break; - default: - DRM_ERROR("tried to enable vblank on non-existent pipe %d\n", - pipe); - return 0; - } - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - /* Enabling vblank events in IMR comes before PIPESTAT write, or - * there's a race where the PIPESTAT vblank bit gets set to 1, so - * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in - * ISR flashes to 1, but the IIR bit doesn't get set to 1 because - * IMR masks it. It doesn't ever get set after we clear the masking - * in IMR because the ISR bit is edge, not level-triggered, on the - * OR of PIPESTAT bits. - */ - i915_enable_irq(dev_priv, interrupt); - pipestat = I915_READ(pipestat_reg); if (IS_I965G(dev)) - pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; + i915_enable_pipestat(dev_priv, pipe, + PIPE_START_VBLANK_INTERRUPT_ENABLE); else - pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; - /* Clear any stale interrupt status */ - pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | - PIPE_VBLANK_INTERRUPT_STATUS); - I915_WRITE(pipestat_reg, pipestat); - (void) I915_READ(pipestat_reg); /* Posting read */ + i915_enable_pipestat(dev_priv, pipe, + PIPE_VBLANK_INTERRUPT_ENABLE); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); - return 0; } @@ -381,37 +387,12 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) void i915_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 pipestat_reg = 0; - u32 pipestat; - u32 interrupt = 0; unsigned long irqflags; - switch (pipe) { - case 0: - pipestat_reg = PIPEASTAT; - interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; - break; - case 1: - pipestat_reg = PIPEBSTAT; - interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; - break; - default: - DRM_ERROR("tried to disable vblank on non-existent pipe %d\n", - pipe); - return; - break; - } - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - i915_disable_irq(dev_priv, interrupt); - pipestat = I915_READ(pipestat_reg); - pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - /* Clear any stale interrupt status */ - pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | - PIPE_VBLANK_INTERRUPT_STATUS); - I915_WRITE(pipestat_reg, pipestat); - (void) I915_READ(pipestat_reg); /* Posting read */ + i915_disable_pipestat(dev_priv, pipe, + PIPE_VBLANK_INTERRUPT_ENABLE | + PIPE_START_VBLANK_INTERRUPT_ENABLE); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } @@ -476,8 +457,11 @@ void i915_driver_irq_preinstall(struct drm_device * dev) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; I915_WRITE(HWSTAM, 0xeffe); + I915_WRITE(PIPEASTAT, 0); + I915_WRITE(PIPEBSTAT, 0); I915_WRITE(IMR, 0xffffffff); I915_WRITE(IER, 0x0); + (void) I915_READ(IER); } int i915_driver_irq_postinstall(struct drm_device *dev) @@ -485,23 +469,28 @@ int i915_driver_irq_postinstall(struct drm_device *dev) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int ret, num_pipes = 2; - /* Set initial unmasked IRQs to just the selected vblank pipes. */ - dev_priv->irq_mask_reg = ~0; - ret = drm_vblank_init(dev, num_pipes); if (ret) return ret; dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; - dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT; - dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ - dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK; + /* Unmask the interrupts that we always want on. */ + dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX; + + dev_priv->pipestat[0] = 0; + dev_priv->pipestat[1] = 0; + + /* Disable pipe interrupt enables, clear pending pipe status */ + I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); + I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); + /* Clear pending interrupt status */ + I915_WRITE(IIR, I915_READ(IIR)); - I915_WRITE(IMR, dev_priv->irq_mask_reg); I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK); + I915_WRITE(IMR, dev_priv->irq_mask_reg); (void) I915_READ(IER); opregion_enable_asle(dev); @@ -513,7 +502,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev) void i915_driver_irq_uninstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 temp; if (!dev_priv) return; @@ -521,13 +509,12 @@ void i915_driver_irq_uninstall(struct drm_device * dev) dev_priv->vblank_pipe = 0; I915_WRITE(HWSTAM, 0xffffffff); + I915_WRITE(PIPEASTAT, 0); + I915_WRITE(PIPEBSTAT, 0); I915_WRITE(IMR, 0xffffffff); I915_WRITE(IER, 0x0); - temp = I915_READ(PIPEASTAT); - I915_WRITE(PIPEASTAT, temp); - temp = I915_READ(PIPEBSTAT); - I915_WRITE(PIPEBSTAT, temp); - temp = I915_READ(IIR); - I915_WRITE(IIR, temp); + I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); + I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); + I915_WRITE(IIR, I915_READ(IIR)); } diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c index 1787a0c7e3ab..13ae731a33db 100644 --- a/drivers/gpu/drm/i915/i915_opregion.c +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -235,17 +235,15 @@ void opregion_enable_asle(struct drm_device *dev) struct opregion_asle *asle = dev_priv->opregion.asle; if (asle) { - u32 pipeb_stats = I915_READ(PIPEBSTAT); if (IS_MOBILE(dev)) { - /* Many devices trigger events with a write to the - legacy backlight controller, so we need to ensure - that it's able to generate interrupts */ - I915_WRITE(PIPEBSTAT, pipeb_stats |= - I915_LEGACY_BLC_EVENT_ENABLE); - i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT | - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); - } else - i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT); + unsigned long irqflags; + + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + i915_enable_pipestat(dev_priv, 1, + I915_LEGACY_BLC_EVENT_ENABLE); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, + irqflags); + } asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN | ASLE_PFMB_EN; -- cgit v1.2.3 From cdfbc41f6d602fc0105fb2b4e0645cc1aa274c12 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 4 Nov 2008 15:50:30 -0800 Subject: drm/i915: Remove IMR masking during interrupt handler, and restart it if needed. The IMR masking was a technique recommended for avoiding getting stuck with no interrupts generated again in MSI mode. It kept new IIR bits from getting set between the IIR read and the IIR write, which would have otherwise prevented an MSI from ever getting generated again. However, this caused a problem for vblank as the IMR mask would keep the pipe event interrupt from getting reflected in IIR, even after the IMR mask was brought back down. Instead, just check the state of IIR after we ack the interrupts we're going to handle, and restart if we didn't get IIR all the way to zero. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_irq.c | 108 +++++++++++++++++++++++----------------- 1 file changed, 61 insertions(+), 47 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index ca3ed1833908..654d42fabec8 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -168,69 +168,83 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 iir; - u32 pipea_stats = 0, pipeb_stats = 0; + u32 iir, new_iir; + u32 pipea_stats, pipeb_stats; int vblank = 0; unsigned long irqflags; - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); atomic_inc(&dev_priv->irq_received); - if (dev->pdev->msi_enabled) - I915_WRITE(IMR, ~0); iir = I915_READ(IIR); - if (iir == 0) { - if (dev->pdev->msi_enabled) { - I915_WRITE(IMR, dev_priv->irq_mask_reg); - (void) I915_READ(IMR); - } - spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); + if (iir == 0) return IRQ_NONE; - } - - /* - * Clear the PIPE(A|B)STAT regs before the IIR - */ - if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) { - pipea_stats = I915_READ(PIPEASTAT); - I915_WRITE(PIPEASTAT, pipea_stats); - } - if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) { - pipeb_stats = I915_READ(PIPEBSTAT); - I915_WRITE(PIPEBSTAT, pipeb_stats); - } + do { + pipea_stats = 0; + pipeb_stats = 0; + /* + * Clear the PIPE(A|B)STAT regs before the IIR + */ + if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) { + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + pipea_stats = I915_READ(PIPEASTAT); + I915_WRITE(PIPEASTAT, pipea_stats); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, + irqflags); + } - I915_WRITE(IIR, iir); - if (dev->pdev->msi_enabled) - I915_WRITE(IMR, dev_priv->irq_mask_reg); - (void) I915_READ(IIR); /* Flush posted writes */ + if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) { + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + pipeb_stats = I915_READ(PIPEBSTAT); + I915_WRITE(PIPEBSTAT, pipeb_stats); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, + irqflags); + } - spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); + I915_WRITE(IIR, iir); + new_iir = I915_READ(IIR); /* Flush posted writes */ - if (dev_priv->sarea_priv) - dev_priv->sarea_priv->last_dispatch = - READ_BREADCRUMB(dev_priv); + if (dev_priv->sarea_priv) + dev_priv->sarea_priv->last_dispatch = + READ_BREADCRUMB(dev_priv); - if (iir & I915_USER_INTERRUPT) { - dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev); - DRM_WAKEUP(&dev_priv->irq_queue); - } + if (iir & I915_USER_INTERRUPT) { + dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev); + DRM_WAKEUP(&dev_priv->irq_queue); + } - if (pipea_stats & I915_VBLANK_INTERRUPT_STATUS) { - vblank++; - drm_handle_vblank(dev, 0); - } + if (pipea_stats & I915_VBLANK_INTERRUPT_STATUS) { + vblank++; + drm_handle_vblank(dev, 0); + } - if (pipeb_stats & I915_VBLANK_INTERRUPT_STATUS) { - vblank++; - drm_handle_vblank(dev, 1); - } + if (pipeb_stats & I915_VBLANK_INTERRUPT_STATUS) { + vblank++; + drm_handle_vblank(dev, 1); + } - if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) || - (iir & I915_ASLE_INTERRUPT)) - opregion_asle_intr(dev); + if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) || + (iir & I915_ASLE_INTERRUPT)) + opregion_asle_intr(dev); + + /* With MSI, interrupts are only generated when iir + * transitions from zero to nonzero. If another bit got + * set while we were handling the existing iir bits, then + * we would never get another interrupt. + * + * This is fine on non-MSI as well, as if we hit this path + * we avoid exiting the interrupt handler only to generate + * another one. + * + * Note that for MSI this could cause a stray interrupt report + * if an interrupt landed in the time between writing IIR and + * the posting read. This should be rare enough to never + * trigger the 99% of 100,000 interrupts test for disabling + * stray interrupts. + */ + iir = new_iir; + } while (iir != 0); return IRQ_HANDLED; } -- cgit v1.2.3 From 28dfe52a6e8a1495067c4331358700a170d0ee86 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 13 Nov 2008 15:00:55 -0800 Subject: drm/i915: Avoid BUG_ONs on VT switch with a wedged chipset. Instead, just warn that bad things are happening and do our best to clean up the mess without the GPU's help. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 53 ++++++++++++++++++++++++++++++----------- 1 file changed, 39 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6b4a2bd20640..edc805afde05 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -31,6 +31,8 @@ #include "i915_drv.h" #include +#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + static int i915_gem_object_set_domain(struct drm_gem_object *obj, uint32_t read_domains, @@ -2299,29 +2301,52 @@ i915_gem_idle(struct drm_device *dev) i915_gem_retire_requests(dev); - /* Active and flushing should now be empty as we've - * waited for a sequence higher than any pending execbuffer - */ - BUG_ON(!list_empty(&dev_priv->mm.active_list)); - BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); + if (!dev_priv->mm.wedged) { + /* Active and flushing should now be empty as we've + * waited for a sequence higher than any pending execbuffer + */ + WARN_ON(!list_empty(&dev_priv->mm.active_list)); + WARN_ON(!list_empty(&dev_priv->mm.flushing_list)); + /* Request should now be empty as we've also waited + * for the last request in the list + */ + WARN_ON(!list_empty(&dev_priv->mm.request_list)); + } - /* Request should now be empty as we've also waited - * for the last request in the list + /* Empty the active and flushing lists to inactive. If there's + * anything left at this point, it means that we're wedged and + * nothing good's going to happen by leaving them there. So strip + * the GPU domains and just stuff them onto inactive. */ - BUG_ON(!list_empty(&dev_priv->mm.request_list)); + while (!list_empty(&dev_priv->mm.active_list)) { + struct drm_i915_gem_object *obj_priv; + + obj_priv = list_first_entry(&dev_priv->mm.active_list, + struct drm_i915_gem_object, + list); + obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS; + i915_gem_object_move_to_inactive(obj_priv->obj); + } + + while (!list_empty(&dev_priv->mm.flushing_list)) { + struct drm_i915_gem_object *obj_priv; + + obj_priv = list_first_entry(&dev_priv->mm.active_list, + struct drm_i915_gem_object, + list); + obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS; + i915_gem_object_move_to_inactive(obj_priv->obj); + } + - /* Move all buffers out of the GTT. */ + /* Move all inactive buffers out of the GTT. */ ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list); + WARN_ON(!list_empty(&dev_priv->mm.inactive_list)); if (ret) { mutex_unlock(&dev->struct_mutex); return ret; } - BUG_ON(!list_empty(&dev_priv->mm.active_list)); - BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); - BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); - BUG_ON(!list_empty(&dev_priv->mm.request_list)); - i915_gem_cleanup_ringbuffer(dev); mutex_unlock(&dev->struct_mutex); -- cgit v1.2.3 From 2678d9d6964b29ecd1975870c7a850242b29bc5c Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 20 Nov 2008 22:54:54 -0800 Subject: drm/i915: Subtract total pinned bytes from available aperture size The old code was wandering through the active list looking for pinned buffers; there may be other pinned buffers around. Fortunately, we keep a count of the total amount of pinned memory and can use that instead. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index edc805afde05..6e4c6dd50659 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -85,20 +85,14 @@ int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_get_aperture *args = data; - struct drm_i915_gem_object *obj_priv; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; args->aper_size = dev->gtt_total; - args->aper_available_size = args->aper_size; - - list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) { - if (obj_priv->pin_count > 0) - args->aper_available_size -= obj_priv->obj->size; - } + args->aper_available_size = (args->aper_size - + atomic_read(&dev->pin_memory)); return 0; } -- cgit v1.2.3 From 05eff845a28499762075d3a72e238a31f4d2407c Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 19 Nov 2008 14:03:05 -0800 Subject: drm/i915: Always read pipestat in irq_handler Because we write pipestat before iir, it's possible that a pipestat interrupt will occur between the pipestat write and the iir write. This leaves pipestat with an interrupt status not visible in iir. This may cause an interrupt flood as we never clear the pipestat event. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_irq.c | 55 +++++++++++++++++++++++++++-------------- 1 file changed, 36 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 654d42fabec8..c3673581db58 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -170,37 +170,54 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 iir, new_iir; u32 pipea_stats, pipeb_stats; + u32 vblank_status; + u32 vblank_enable; int vblank = 0; unsigned long irqflags; + int irq_received; + int ret = IRQ_NONE; atomic_inc(&dev_priv->irq_received); iir = I915_READ(IIR); - if (iir == 0) - return IRQ_NONE; + if (IS_I965G(dev)) { + vblank_status = I915_START_VBLANK_INTERRUPT_STATUS; + vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE; + } else { + vblank_status = I915_VBLANK_INTERRUPT_STATUS; + vblank_enable = I915_VBLANK_INTERRUPT_ENABLE; + } - do { - pipea_stats = 0; - pipeb_stats = 0; + for (;;) { + irq_received = iir != 0; + + /* Can't rely on pipestat interrupt bit in iir as it might + * have been cleared after the pipestat interrupt was received. + * It doesn't set the bit in iir again, but it still produces + * interrupts (for non-MSI). + */ + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + pipea_stats = I915_READ(PIPEASTAT); + pipeb_stats = I915_READ(PIPEBSTAT); /* * Clear the PIPE(A|B)STAT regs before the IIR */ - if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) { - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - pipea_stats = I915_READ(PIPEASTAT); + if (pipea_stats & 0x8000ffff) { I915_WRITE(PIPEASTAT, pipea_stats); - spin_unlock_irqrestore(&dev_priv->user_irq_lock, - irqflags); + irq_received = 1; } - if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) { - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - pipeb_stats = I915_READ(PIPEBSTAT); + if (pipeb_stats & 0x8000ffff) { I915_WRITE(PIPEBSTAT, pipeb_stats); - spin_unlock_irqrestore(&dev_priv->user_irq_lock, - irqflags); + irq_received = 1; } + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); + + if (!irq_received) + break; + + ret = IRQ_HANDLED; I915_WRITE(IIR, iir); new_iir = I915_READ(IIR); /* Flush posted writes */ @@ -214,12 +231,12 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) DRM_WAKEUP(&dev_priv->irq_queue); } - if (pipea_stats & I915_VBLANK_INTERRUPT_STATUS) { + if (pipea_stats & vblank_status) { vblank++; drm_handle_vblank(dev, 0); } - if (pipeb_stats & I915_VBLANK_INTERRUPT_STATUS) { + if (pipeb_stats & vblank_status) { vblank++; drm_handle_vblank(dev, 1); } @@ -244,9 +261,9 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) * stray interrupts. */ iir = new_iir; - } while (iir != 0); + } - return IRQ_HANDLED; + return ret; } static int i915_emit_irq(struct drm_device * dev) -- cgit v1.2.3 From 6133047aa64d2fd5b3b79dff74f696ded45615b2 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 20 Nov 2008 23:14:48 -0800 Subject: drm/i915: execbuffer pins objects, no need to ensure they're still in the GTT Before we had the notion of pinning objects, we had a kludge around to make sure all of the objects were still resident in the GTT before we committed to executing a batch buffer. We don't need this any longer, and it sticks an error return in the middle of object domain computations that must be associated with a subsequent flush/invalidate emmission into the ring. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6e4c6dd50659..54bb0d0e49b8 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1866,17 +1866,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; - struct drm_i915_gem_object *obj_priv = obj->driver_private; - - if (obj_priv->gtt_space == NULL) { - /* We evicted the buffer in the process of validating - * our set of buffers in. We could try to recover by - * kicking them everything out and trying again from - * the start. - */ - ret = -ENOMEM; - goto err; - } /* make sure all previous memory operations have passed */ ret = i915_gem_object_set_domain(obj, -- cgit v1.2.3 From 52440211dcdc52c0b757f8b34d122e11b12cdd50 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 18 Nov 2008 09:30:25 -0800 Subject: drm: move drm vblank initialization/cleanup to driver load/unload drm vblank initialization keeps track of the changes in driver-supplied frame counts across vt switch and mode setting, but only if you let it by not tearing down the drm vblank structure. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_drv.c | 2 ++ drivers/gpu/drm/drm_irq.c | 4 +--- drivers/gpu/drm/i915/i915_dma.c | 7 +++++++ drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/i915_irq.c | 5 ----- drivers/gpu/drm/mga/mga_dma.c | 8 ++++++++ drivers/gpu/drm/mga/mga_irq.c | 5 ----- drivers/gpu/drm/r128/r128_drv.c | 6 ++++++ drivers/gpu/drm/r128/r128_drv.h | 1 + drivers/gpu/drm/r128/r128_irq.c | 2 +- drivers/gpu/drm/radeon/radeon_cp.c | 6 ++++++ drivers/gpu/drm/radeon/radeon_irq.c | 5 ----- drivers/gpu/drm/via/via_irq.c | 1 - drivers/gpu/drm/via/via_map.c | 11 ++++++++++- include/drm/drmP.h | 1 + 15 files changed, 45 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 3ab1e9cc4692..996097acb5e7 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -305,6 +305,8 @@ static void drm_cleanup(struct drm_device * dev) return; } + drm_vblank_cleanup(dev); + drm_lastclose(dev); if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) && diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 15c8dabc3e97..1e787f894b3c 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -94,7 +94,7 @@ static void vblank_disable_fn(unsigned long arg) } } -static void drm_vblank_cleanup(struct drm_device *dev) +void drm_vblank_cleanup(struct drm_device *dev) { /* Bail if the driver didn't call drm_vblank_init() */ if (dev->num_crtcs == 0) @@ -278,8 +278,6 @@ int drm_irq_uninstall(struct drm_device * dev) free_irq(dev->pdev->irq, dev); - drm_vblank_cleanup(dev); - return 0; } EXPORT_SYMBOL(drm_irq_uninstall); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 0d215e38606a..ba89b42f790a 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -856,6 +856,13 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) spin_lock_init(&dev_priv->user_irq_lock); + ret = drm_vblank_init(dev, I915_NUM_PIPE); + + if (ret) { + (void) i915_driver_unload(dev); + return ret; + } + return ret; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ed1edcf8704f..b24d522f490c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -47,6 +47,8 @@ enum pipe { PIPE_B, }; +#define I915_NUM_PIPE 2 + /* Interface history: * * 1.1: Original. diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index c3673581db58..fe3d9cc72bf5 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -498,11 +498,6 @@ void i915_driver_irq_preinstall(struct drm_device * dev) int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - int ret, num_pipes = 2; - - ret = drm_vblank_init(dev, num_pipes); - if (ret) - return ret; dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c index c1d12dbfa8d8..b49c5ff29585 100644 --- a/drivers/gpu/drm/mga/mga_dma.c +++ b/drivers/gpu/drm/mga/mga_dma.c @@ -396,6 +396,7 @@ int mga_freelist_put(struct drm_device * dev, struct drm_buf * buf) int mga_driver_load(struct drm_device * dev, unsigned long flags) { drm_mga_private_t *dev_priv; + int ret; dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER); if (!dev_priv) @@ -415,6 +416,13 @@ int mga_driver_load(struct drm_device * dev, unsigned long flags) dev->types[7] = _DRM_STAT_PRIMARY; dev->types[8] = _DRM_STAT_SECONDARY; + ret = drm_vblank_init(dev, 1); + + if (ret) { + (void) mga_driver_unload(dev); + return ret; + } + return 0; } diff --git a/drivers/gpu/drm/mga/mga_irq.c b/drivers/gpu/drm/mga/mga_irq.c index bab42f41188b..daa6041a483a 100644 --- a/drivers/gpu/drm/mga/mga_irq.c +++ b/drivers/gpu/drm/mga/mga_irq.c @@ -152,11 +152,6 @@ void mga_driver_irq_preinstall(struct drm_device * dev) int mga_driver_irq_postinstall(struct drm_device *dev) { drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; - int ret; - - ret = drm_vblank_init(dev, 1); - if (ret) - return ret; DRM_INIT_WAITQUEUE(&dev_priv->fence_queue); diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c index 3265d53ba91f..601f4c0e5da5 100644 --- a/drivers/gpu/drm/r128/r128_drv.c +++ b/drivers/gpu/drm/r128/r128_drv.c @@ -45,6 +45,7 @@ static struct drm_driver driver = { DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG | DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED, .dev_priv_size = sizeof(drm_r128_buf_priv_t), + .load = r128_driver_load, .preclose = r128_driver_preclose, .lastclose = r128_driver_lastclose, .get_vblank_counter = r128_get_vblank_counter, @@ -84,6 +85,11 @@ static struct drm_driver driver = { .patchlevel = DRIVER_PATCHLEVEL, }; +int r128_driver_load(struct drm_device * dev, unsigned long flags) +{ + return drm_vblank_init(dev, 1); +} + static int __init r128_init(void) { driver.num_ioctls = r128_max_ioctl; diff --git a/drivers/gpu/drm/r128/r128_drv.h b/drivers/gpu/drm/r128/r128_drv.h index 5898b274279d..797a26c42dab 100644 --- a/drivers/gpu/drm/r128/r128_drv.h +++ b/drivers/gpu/drm/r128/r128_drv.h @@ -159,6 +159,7 @@ extern void r128_driver_irq_preinstall(struct drm_device * dev); extern int r128_driver_irq_postinstall(struct drm_device *dev); extern void r128_driver_irq_uninstall(struct drm_device * dev); extern void r128_driver_lastclose(struct drm_device * dev); +extern int r128_driver_load(struct drm_device * dev, unsigned long flags); extern void r128_driver_preclose(struct drm_device * dev, struct drm_file *file_priv); diff --git a/drivers/gpu/drm/r128/r128_irq.c b/drivers/gpu/drm/r128/r128_irq.c index d7349012a680..69810fb8ac49 100644 --- a/drivers/gpu/drm/r128/r128_irq.c +++ b/drivers/gpu/drm/r128/r128_irq.c @@ -102,7 +102,7 @@ void r128_driver_irq_preinstall(struct drm_device * dev) int r128_driver_irq_postinstall(struct drm_device *dev) { - return drm_vblank_init(dev, 1); + return 0; } void r128_driver_irq_uninstall(struct drm_device * dev) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index abdc1ae38467..dcebb4bee7aa 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -1757,6 +1757,12 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags) if (ret != 0) return ret; + ret = drm_vblank_init(dev, 2); + if (ret) { + radeon_driver_unload(dev); + return ret; + } + DRM_DEBUG("%s card detected\n", ((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI")))); return ret; diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index 5079f7054a2f..97c0599fdb1e 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -337,15 +337,10 @@ int radeon_driver_irq_postinstall(struct drm_device *dev) { drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; - int ret; atomic_set(&dev_priv->swi_emitted, 0); DRM_INIT_WAITQUEUE(&dev_priv->swi_queue); - ret = drm_vblank_init(dev, 2); - if (ret) - return ret; - dev->max_vblank_count = 0x001fffff; radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1); diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c index 665d319b927b..c248c1d37268 100644 --- a/drivers/gpu/drm/via/via_irq.c +++ b/drivers/gpu/drm/via/via_irq.c @@ -314,7 +314,6 @@ int via_driver_irq_postinstall(struct drm_device *dev) if (!dev_priv) return -EINVAL; - drm_vblank_init(dev, 1); status = VIA_READ(VIA_REG_INTERRUPT); VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL | dev_priv->irq_enable_mask); diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c index a967556be014..2c4f0b485792 100644 --- a/drivers/gpu/drm/via/via_map.c +++ b/drivers/gpu/drm/via/via_map.c @@ -107,8 +107,17 @@ int via_driver_load(struct drm_device *dev, unsigned long chipset) ret = drm_sman_init(&dev_priv->sman, 2, 12, 8); if (ret) { drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER); + return ret; } - return ret; + + ret = drm_vblank_init(dev, 1); + if (ret) { + drm_sman_takedown(&dev_priv->sman); + drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER); + return ret; + } + + return 0; } int via_driver_unload(struct drm_device *dev) diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 28c7f1679d49..d5e8e5c89548 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1151,6 +1151,7 @@ extern u32 drm_vblank_count(struct drm_device *dev, int crtc); extern void drm_handle_vblank(struct drm_device *dev, int crtc); extern int drm_vblank_get(struct drm_device *dev, int crtc); extern void drm_vblank_put(struct drm_device *dev, int crtc); +extern void drm_vblank_cleanup(struct drm_device *dev); /* Modesetting support */ extern int drm_modeset_ctl(struct drm_device *dev, void *data, struct drm_file *file_priv); -- cgit v1.2.3 From b54ad409fd09a395b839fb81f300880d76861c0e Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 24 Nov 2008 15:56:17 -0800 Subject: netfilter: ctnetlink: fix conntrack creation race Conntrack creation through ctnetlink has two races: - the timer may expire and free the conntrack concurrently, causing an invalid memory access when attempting to put it in the hash tables - an identical conntrack entry may be created in the packet processing path in the time between the lookup and hash insertion Hold the conntrack lock between the lookup and insertion to avoid this. Reported-by: Zoltan Borbely Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_core.c | 2 -- net/netfilter/nf_conntrack_netlink.c | 5 +++-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 622d7c671cb7..233fdd2d7d21 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -305,9 +305,7 @@ void nf_conntrack_hash_insert(struct nf_conn *ct) hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); repl_hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_REPLY].tuple); - spin_lock_bh(&nf_conntrack_lock); __nf_conntrack_hash_insert(ct, hash, repl_hash); - spin_unlock_bh(&nf_conntrack_lock); } EXPORT_SYMBOL_GPL(nf_conntrack_hash_insert); diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index a040d46f85d6..3b009a3e8549 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1090,7 +1090,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[], struct nf_conn_help *help; struct nf_conntrack_helper *helper; - ct = nf_conntrack_alloc(&init_net, otuple, rtuple, GFP_KERNEL); + ct = nf_conntrack_alloc(&init_net, otuple, rtuple, GFP_ATOMIC); if (ct == NULL || IS_ERR(ct)) return -ENOMEM; @@ -1212,13 +1212,14 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, atomic_inc(&master_ct->ct_general.use); } - spin_unlock_bh(&nf_conntrack_lock); err = -ENOENT; if (nlh->nlmsg_flags & NLM_F_CREATE) err = ctnetlink_create_conntrack(cda, &otuple, &rtuple, master_ct); + spin_unlock_bh(&nf_conntrack_lock); + if (err < 0 && master_ct) nf_ct_put(master_ct); -- cgit v1.2.3 From f79fca55f9a6fe54635ad32ddc8a38f92a94ec30 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Mon, 24 Nov 2008 16:06:17 -0800 Subject: netfilter: xtables: add missing const qualifier to xt_tgchk_param When entryinfo was a standalone parameter to functions, it used to be "const void *". Put the const back in. Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter/x_tables.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index be41b609c88f..e52ce475d19f 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -251,7 +251,7 @@ struct xt_target_param { */ struct xt_tgchk_param { const char *table; - void *entryinfo; + const void *entryinfo; const struct xt_target *target; void *targinfo; unsigned int hook_mask; -- cgit v1.2.3 From 631339f1e544a4d39a63cfe6708c5bddcd5a2c48 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 24 Nov 2008 16:06:50 -0800 Subject: bridge: netfilter: fix update_pmtu crash with GRE As GRE tries to call the update_pmtu function on skb->dst and bridge supplies an skb->dst that has a NULL ops field, all is not well. This patch fixes this by giving the bridge device an ops field with an update_pmtu function. For the moment I've left all other fields blank but we can fill them in later should the need arise. Based on report and patch by Philip Craig. Signed-off-by: Herbert Xu Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/bridge/br_netfilter.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index fa5cda4e552a..45f61c348e36 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -101,6 +101,18 @@ static inline __be16 pppoe_proto(const struct sk_buff *skb) pppoe_proto(skb) == htons(PPP_IPV6) && \ brnf_filter_pppoe_tagged) +static void fake_update_pmtu(struct dst_entry *dst, u32 mtu) +{ +} + +static struct dst_ops fake_dst_ops = { + .family = AF_INET, + .protocol = __constant_htons(ETH_P_IP), + .update_pmtu = fake_update_pmtu, + .entry_size = sizeof(struct rtable), + .entries = ATOMIC_INIT(0), +}; + /* * Initialize bogus route table used to keep netfilter happy. * Currently, we fill in the PMTU entry because netfilter @@ -117,6 +129,7 @@ void br_netfilter_rtable_init(struct net_bridge *br) rt->u.dst.path = &rt->u.dst; rt->u.dst.metrics[RTAX_MTU - 1] = 1500; rt->u.dst.flags = DST_NOXFRM; + rt->u.dst.ops = &fake_dst_ops; } static inline struct rtable *bridge_parent_rtable(const struct net_device *dev) -- cgit v1.2.3 From 7953031da4200323ab5d85bd514054ca4ba9d225 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 24 Nov 2008 18:11:16 -0800 Subject: ARM: OMAP: Remove broken LCD driver for SX1 Recently the omap McBSP code was cleaned up to get rid of direct McBSP register tinkering by the drivers. Looks like lcd_sx1.c never got converted, and now it breaks builds. It seems the lcd_sx1.c driver is attempting SPI mode, but doing it in a different way compared to omap_mcbsp_set_spi_mode(). Remove the broken driver, patches welcome to add it back when done properly by patching both mcbsp.c and lcd_sx1.c. Cc: Vovan888@gmail.com Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: Tony Lindgren --- drivers/video/omap/Makefile | 1 - drivers/video/omap/lcd_sx1.c | 327 ------------------------------------------- 2 files changed, 328 deletions(-) delete mode 100644 drivers/video/omap/lcd_sx1.c diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index 99da8b6d2c36..ed13889c1162 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -23,7 +23,6 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o -objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o omapfb-objs := $(objs-yy) diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c deleted file mode 100644 index e55de201b8ff..000000000000 --- a/drivers/video/omap/lcd_sx1.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * LCD panel support for the Siemens SX1 mobile phone - * - * Current version : Vovan888@gmail.com, great help from FCA00000 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * OMAP310 GPIO registers - */ -#define GPIO_DATA_INPUT 0xfffce000 -#define GPIO_DATA_OUTPUT 0xfffce004 -#define GPIO_DIR_CONTROL 0xfffce008 -#define GPIO_INT_CONTROL 0xfffce00c -#define GPIO_INT_MASK 0xfffce010 -#define GPIO_INT_STATUS 0xfffce014 -#define GPIO_PIN_CONTROL 0xfffce018 - - -#define A_LCD_SSC_RD 3 -#define A_LCD_SSC_SD 7 -#define _A_LCD_RESET 9 -#define _A_LCD_SSC_CS 12 -#define _A_LCD_SSC_A0 13 - -#define DSP_REG 0xE1017024 - -const unsigned char INIT_1[12] = { - 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00 -}; - -const unsigned char INIT_2[127] = { - 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00, - 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00, - 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00, - 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01, - 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01, - 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01, - 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01, - 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01, - 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01, - 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01, - 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01, - 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01, - 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01, - 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01, - 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02, - 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00 -}; - -const unsigned char INIT_3[15] = { - 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59, - 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF -}; - -static void epson_sendbyte(int flag, unsigned char byte) -{ - int i, shifter = 0x80; - - if (!flag) - gpio_set_value(_A_LCD_SSC_A0, 0); - mdelay(2); - gpio_set_value(A_LCD_SSC_RD, 1); - - gpio_set_value(A_LCD_SSC_SD, flag); - - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); - for (i = 0; i < 8; i++) { - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - gpio_set_value(A_LCD_SSC_SD, shifter & byte); - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); - shifter >>= 1; - } - gpio_set_value(_A_LCD_SSC_A0, 1); -} - -static void init_system(void) -{ - omap_mcbsp_request(OMAP_MCBSP3); - omap_mcbsp_stop(OMAP_MCBSP3); -} - -static void setup_GPIO(void) -{ - /* new wave */ - gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd"); - gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd"); - gpio_request(_A_LCD_RESET, "lcd_reset"); - gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs"); - gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0"); - - /* set GPIOs to output, with initial data */ - gpio_direction_output(A_LCD_SSC_RD, 1); - gpio_direction_output(A_LCD_SSC_SD, 0); - gpio_direction_output(_A_LCD_RESET, 0); - gpio_direction_output(_A_LCD_SSC_CS, 1); - gpio_direction_output(_A_LCD_SSC_A0, 1); -} - -static void display_init(void) -{ - int i; - - omap_cfg_reg(MCBSP3_CLKX); - - mdelay(2); - setup_GPIO(); - mdelay(2); - - /* reset LCD */ - gpio_set_value(A_LCD_SSC_SD, 1); - epson_sendbyte(0, 0x25); - - gpio_set_value(_A_LCD_RESET, 0); - mdelay(10); - gpio_set_value(_A_LCD_RESET, 1); - - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(2); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD, phase 1 */ - epson_sendbyte(0, 0xCA); - for (i = 0; i < 10; i++) - epson_sendbyte(1, INIT_1[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 2 */ - epson_sendbyte(0, 0xCB); - for (i = 0; i < 125; i++) - epson_sendbyte(1, INIT_2[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 2a */ - epson_sendbyte(0, 0xCC); - for (i = 0; i < 14; i++) - epson_sendbyte(1, INIT_3[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 3 */ - epson_sendbyte(0, 0xBC); - epson_sendbyte(1, 0x08); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 4 */ - epson_sendbyte(0, 0x07); - epson_sendbyte(1, 0x05); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 5 */ - epson_sendbyte(0, 0x94); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 6 */ - epson_sendbyte(0, 0xC6); - epson_sendbyte(1, 0x80); - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(100); /* used to be 1000 */ - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 7 */ - epson_sendbyte(0, 0x16); - epson_sendbyte(1, 0x02); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0xB1); - epson_sendbyte(1, 0x00); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 8 */ - epson_sendbyte(0, 0x76); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0xDB); - epson_sendbyte(1, 0x00); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 9 */ - epson_sendbyte(0, 0xAF); - gpio_set_value(_A_LCD_SSC_CS, 1); -} - -static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) -{ - return 0; -} - -static void sx1_panel_cleanup(struct lcd_panel *panel) -{ -} - -static void sx1_panel_disable(struct lcd_panel *panel) -{ - printk(KERN_INFO "SX1: LCD panel disable\n"); - sx1_setmmipower(0); - gpio_set_value(_A_LCD_SSC_CS, 1); - - epson_sendbyte(0, 0x25); - gpio_set_value(_A_LCD_SSC_CS, 0); - - epson_sendbyte(0, 0xAE); - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(100); - gpio_set_value(_A_LCD_SSC_CS, 0); - - epson_sendbyte(0, 0x95); - gpio_set_value(_A_LCD_SSC_CS, 1); -} - -static int sx1_panel_enable(struct lcd_panel *panel) -{ - printk(KERN_INFO "lcd_sx1: LCD panel enable\n"); - init_system(); - display_init(); - - sx1_setmmipower(1); - sx1_setbacklight(0x18); - sx1_setkeylight (0x06); - return 0; -} - - -static unsigned long sx1_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -struct lcd_panel sx1_panel = { - .name = "sx1", - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | - OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK | - OMAP_LCDC_INV_OUTPUT_EN, - - .x_res = 176, - .y_res = 220, - .data_lines = 16, - .bpp = 16, - .hsw = 5, - .hfp = 5, - .hbp = 5, - .vsw = 2, - .vfp = 1, - .vbp = 1, - .pixel_clock = 1500, - - .init = sx1_panel_init, - .cleanup = sx1_panel_cleanup, - .enable = sx1_panel_enable, - .disable = sx1_panel_disable, - .get_caps = sx1_panel_get_caps, -}; - -static int sx1_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&sx1_panel); - return 0; -} - -static int sx1_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg) -{ - return 0; -} - -static int sx1_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver sx1_panel_driver = { - .probe = sx1_panel_probe, - .remove = sx1_panel_remove, - .suspend = sx1_panel_suspend, - .resume = sx1_panel_resume, - .driver = { - .name = "lcd_sx1", - .owner = THIS_MODULE, - }, -}; - -static int sx1_panel_drv_init(void) -{ - return platform_driver_register(&sx1_panel_driver); -} - -static void sx1_panel_drv_cleanup(void) -{ - platform_driver_unregister(&sx1_panel_driver); -} - -module_init(sx1_panel_drv_init); -module_exit(sx1_panel_drv_cleanup); -- cgit v1.2.3 From 244f46ae6e9e18f6fc0be7d1f49febde4762c34b Mon Sep 17 00:00:00 2001 From: Bernard Pidoux Date: Mon, 24 Nov 2008 11:49:40 +0000 Subject: rose: zero length frame filtering in af_rose.c Since changeset e79ad711a0108475c1b3a03815527e7237020b08 from mainline, >From David S. Miller, empty packet can be transmitted on connected socket for datagram protocols. However, this patch broke a high level application using ROSE network protocol with connected datagram. Bulletin Board Stations perform bulletins forwarding between BBS stations via ROSE network using a forward protocol. Now, if for some reason, a buffer in the application software happens to be empty at a specific moment, ROSE sends an empty packet via unfiltered packet socket. When received, this ROSE packet introduces perturbations of data exchange of BBS forwarding, for the application message forwarding protocol is waiting for something else. We agree that a more careful programming of the application protocol would avoid this situation and we are willing to debug it. But, as an empty frame is no use and does not have any meaning for ROSE protocol, we may consider filtering zero length data both when sending and receiving socket data. The proposed patch repaired BBS data exchange through ROSE network that were broken since 2.6.22.11 kernel. Signed-off-by: Bernard Pidoux Signed-off-by: David S. Miller --- net/rose/af_rose.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index a7f1ce11bc22..0c1cc7612800 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -1072,6 +1072,10 @@ static int rose_sendmsg(struct kiocb *iocb, struct socket *sock, unsigned char *asmptr; int n, size, qbit = 0; + /* ROSE empty frame has no meaning : don't send */ + if (len == 0) + return 0; + if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_EOR|MSG_CMSG_COMPAT)) return -EINVAL; @@ -1265,6 +1269,12 @@ static int rose_recvmsg(struct kiocb *iocb, struct socket *sock, skb_reset_transport_header(skb); copied = skb->len; + /* ROSE empty frame has no meaning : ignore it */ + if (copied == 0) { + skb_free_datagram(sk, skb); + return copied; + } + if (copied > size) { copied = size; msg->msg_flags |= MSG_TRUNC; -- cgit v1.2.3 From 11c6dd2c723a9ff9bdd4ee11b2798a08abc94e98 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Tue, 25 Nov 2008 01:00:47 -0800 Subject: phylib: Add Vitesse VSC8221 SGMII PHY PHY is mostly compatible with the existing VSC8244 PHY. The init sequence is different and the interrupt mask lacks some bits present in the VSC8244. Rather than making a copy of the existing VSC234x config_intr function and change one constant, I modify it to select the interrupt mask based on which driver is calling it. This lets it be used by both drivers. Signed-off-by: Trent Piepho Signed-off-by: David S. Miller --- drivers/net/phy/vitesse.c | 64 ++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 55 insertions(+), 9 deletions(-) diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 8874497b6bbf..dd3b2447e85a 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -34,6 +34,8 @@ #define MII_VSC8244_IMASK_DUPLEX 0x1000 #define MII_VSC8244_IMASK_MASK 0xf000 +#define MII_VSC8221_IMASK_MASK 0xa000 + /* Vitesse Interrupt Status Register */ #define MII_VSC8244_ISTAT 0x1a #define MII_VSC8244_ISTAT_STATUS 0x8000 @@ -49,6 +51,12 @@ #define MII_VSC8244_AUXCONSTAT_GBIT 0x0010 #define MII_VSC8244_AUXCONSTAT_100 0x0008 +#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */ +#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004 + +#define PHY_ID_VSC8244 0x000fc6c0 +#define PHY_ID_VSC8221 0x000fc550 + MODULE_DESCRIPTION("Vitesse PHY driver"); MODULE_AUTHOR("Kriston Carson"); MODULE_LICENSE("GPL"); @@ -95,13 +103,15 @@ static int vsc824x_ack_interrupt(struct phy_device *phydev) return (err < 0) ? err : 0; } -static int vsc824x_config_intr(struct phy_device *phydev) +static int vsc82xx_config_intr(struct phy_device *phydev) { int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_VSC8244_IMASK, - MII_VSC8244_IMASK_MASK); + phydev->drv->phy_id == PHY_ID_VSC8244 ? + MII_VSC8244_IMASK_MASK : + MII_VSC8221_IMASK_MASK); else { /* * The Vitesse PHY cannot clear the interrupt @@ -120,7 +130,7 @@ static int vsc824x_config_intr(struct phy_device *phydev) /* Vitesse 824x */ static struct phy_driver vsc8244_driver = { - .phy_id = 0x000fc6c0, + .phy_id = PHY_ID_VSC8244, .name = "Vitesse VSC8244", .phy_id_mask = 0x000fffc0, .features = PHY_GBIT_FEATURES, @@ -129,19 +139,55 @@ static struct phy_driver vsc8244_driver = { .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &vsc824x_ack_interrupt, - .config_intr = &vsc824x_config_intr, + .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, }; -static int __init vsc8244_init(void) +static int vsc8221_config_init(struct phy_device *phydev) { - return phy_driver_register(&vsc8244_driver); + int err; + + err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT, + MII_VSC8221_AUXCONSTAT_INIT); + return err; + + /* Perhaps we should set EXT_CON1 based on the interface? + Options are 802.3Z SerDes or SGMII */ +} + +/* Vitesse 8221 */ +static struct phy_driver vsc8221_driver = { + .phy_id = PHY_ID_VSC8221, + .phy_id_mask = 0x000ffff0, + .name = "Vitesse VSC8221", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc8221_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init vsc82xx_init(void) +{ + int err; + + err = phy_driver_register(&vsc8244_driver); + if (err < 0) + return err; + err = phy_driver_register(&vsc8221_driver); + if (err < 0) + phy_driver_unregister(&vsc8244_driver); + return err; } -static void __exit vsc8244_exit(void) +static void __exit vsc82xx_exit(void) { phy_driver_unregister(&vsc8244_driver); + phy_driver_unregister(&vsc8221_driver); } -module_init(vsc8244_init); -module_exit(vsc8244_exit); +module_init(vsc82xx_init); +module_exit(vsc82xx_exit); -- cgit v1.2.3 From 9e97697666d0e7494946cfb639f6a9faacd5f1b0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 25 Nov 2008 08:17:20 +0100 Subject: ALSA: hda - Fix caching of SPDIF status bits SPDIF status bits controls are written via snd_hda_codec_write() without caching. This causes a regression at resume that the bits are lost. Simply replacing it with the cached version fixes the problem. Reference: http://lkml.org/lkml/2008/11/24/324 Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index ba1ab737b55f..eb9164176dab 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1436,12 +1436,12 @@ static void set_dig_out(struct hda_codec *codec, hda_nid_t nid, { hda_nid_t *d; - snd_hda_codec_write(codec, nid, 0, verb, val); + snd_hda_codec_write_cache(codec, nid, 0, verb, val); d = codec->slave_dig_outs; if (!d) return; for (; *d; d++) - snd_hda_codec_write(codec, *d, 0, verb, val); + snd_hda_codec_write_cache(codec, *d, 0, verb, val); } static inline void set_dig_out_convert(struct hda_codec *codec, hda_nid_t nid, -- cgit v1.2.3 From c30f8a6c6d74f67bc2107726cc61a1e7c71e9740 Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Mon, 24 Nov 2008 11:37:38 -0600 Subject: KVM: ppc: stop leaking host memory on VM exit When the VM exits, we must call put_page() for every page referenced in the shadow TLB. Without this patch, we usually leak 30-50 host pages (120 - 200 KiB with 4 KiB pages). The maximum number of pages leaked is the size of our shadow TLB, 64 pages. Signed-off-by: Hollis Blanchard Signed-off-by: Avi Kivity --- arch/powerpc/include/asm/kvm_ppc.h | 2 ++ arch/powerpc/kvm/44x_tlb.c | 8 ++++++++ arch/powerpc/kvm/powerpc.c | 1 + 3 files changed, 11 insertions(+) diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 8931ba729d2b..bb62ad876de3 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -104,4 +104,6 @@ static inline void kvmppc_set_pid(struct kvm_vcpu *vcpu, u32 new_pid) } } +extern void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu); + #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index 2e227a412bc2..ad72c6f9811f 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -124,6 +124,14 @@ static void kvmppc_44x_shadow_release(struct kvm_vcpu *vcpu, } } +void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu) +{ + int i; + + for (i = 0; i <= tlb_44x_hwater; i++) + kvmppc_44x_shadow_release(vcpu, i); +} + void kvmppc_tlbe_set_modified(struct kvm_vcpu *vcpu, unsigned int i) { vcpu->arch.shadow_tlb_mod[i] = 1; diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 90a6fc422b23..fda9baada132 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -238,6 +238,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) { + kvmppc_core_destroy_mmu(vcpu); } /* Note: clearing MSR[DE] just means that the debug interrupt will not be -- cgit v1.2.3 From f73d35853e9263c7c404f0d6c0fe3d83fc6fd5c0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 25 Nov 2008 08:21:51 +0100 Subject: ALSA: hda - Fix AFG power management on IDT 92HD* codecs The AFG pin power-mapping isn't properly set for the fixed I/O pins on IDT 92HD* codecs. This resulted in the low power mode after the boot until any jack detection is executed, thus no output from the speaker. This patch fixes the power mapping for the fixed pins, and also fixes the GPIO bits and digital I/O pin settings properly in stac92xx_ini(). Reference: Novell bnc#446025 https://bugzilla.novell.com/show_bug.cgi?id=446025 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 80 ++++++++++++++++++++++++++++-------------- 1 file changed, 54 insertions(+), 26 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 2b52a4056a9b..5a29699c6fdb 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3697,10 +3697,14 @@ static void stac92xx_power_down(struct hda_codec *codec) AC_VERB_SET_POWER_STATE, AC_PWRST_D3); } +static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid, + int enable); + static int stac92xx_init(struct hda_codec *codec) { struct sigmatel_spec *spec = codec->spec; struct auto_pin_cfg *cfg = &spec->autocfg; + unsigned int gpio; int i; snd_hda_sequence_write(codec, spec->init); @@ -3711,6 +3715,16 @@ static int stac92xx_init(struct hda_codec *codec) snd_hda_codec_write_cache(codec, spec->adc_nids[i], 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D3); + + /* set up GPIO */ + gpio = spec->gpio_data; + /* turn on EAPD statically when spec->eapd_switch isn't set. + * otherwise, unsol event will turn it on/off dynamically + */ + if (!spec->eapd_switch) + gpio |= spec->eapd_mask; + stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, gpio); + /* set up pins */ if (spec->hp_detect) { /* Enable unsolicited responses on the HP widget */ @@ -3750,39 +3764,43 @@ static int stac92xx_init(struct hda_codec *codec) for (i = 0; i < spec->num_dmics; i++) stac92xx_auto_set_pinctl(codec, spec->dmic_nids[i], AC_PINCTL_IN_EN); + if (cfg->dig_out_pin) + stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin, + AC_PINCTL_OUT_EN); + if (cfg->dig_in_pin) + stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin, + AC_PINCTL_IN_EN); for (i = 0; i < spec->num_pwrs; i++) { - int event = is_nid_hp_pin(cfg, spec->pwr_nids[i]) - ? STAC_HP_EVENT : STAC_PWR_EVENT; - int pinctl = snd_hda_codec_read(codec, spec->pwr_nids[i], - 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); - int def_conf = snd_hda_codec_read(codec, spec->pwr_nids[i], - 0, AC_VERB_GET_CONFIG_DEFAULT, 0); - def_conf = get_defcfg_connect(def_conf); + hda_nid_t nid = spec->pwr_nids[i]; + int pinctl, def_conf; + int event = STAC_PWR_EVENT; + + if (is_nid_hp_pin(cfg, nid) && spec->hp_detect) + continue; /* already has an unsol event */ + + pinctl = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_PIN_WIDGET_CONTROL, 0); /* outputs are only ports capable of power management * any attempts on powering down a input port cause the * referenced VREF to act quirky. */ if (pinctl & AC_PINCTL_IN_EN) continue; + def_conf = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_CONFIG_DEFAULT, 0); + def_conf = get_defcfg_connect(def_conf); /* skip any ports that don't have jacks since presence * detection is useless */ - if (def_conf && def_conf != AC_JACK_PORT_FIXED) + if (def_conf != AC_JACK_PORT_COMPLEX) { + if (def_conf != AC_JACK_PORT_NONE) + stac_toggle_power_map(codec, nid, 1); continue; + } enable_pin_detect(codec, spec->pwr_nids[i], event | i); codec->patch_ops.unsol_event(codec, (event | i) << 26); } if (spec->dac_list) stac92xx_power_down(codec); - if (cfg->dig_out_pin) - stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin, - AC_PINCTL_OUT_EN); - if (cfg->dig_in_pin) - stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin, - AC_PINCTL_IN_EN); - - stac_gpio_set(codec, spec->gpio_mask, - spec->gpio_dir, spec->gpio_data); - return 0; } @@ -3947,14 +3965,18 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) } } -static void stac92xx_pin_sense(struct hda_codec *codec, int idx) +static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid, + int enable) { struct sigmatel_spec *spec = codec->spec; - hda_nid_t nid = spec->pwr_nids[idx]; - int presence, val; - val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) - & 0x000000ff; - presence = get_hp_pin_presence(codec, nid); + unsigned int idx, val; + + for (idx = 0; idx < spec->num_pwrs; idx++) { + if (spec->pwr_nids[idx] == nid) + break; + } + if (idx >= spec->num_pwrs) + return; /* several codecs have two power down bits */ if (spec->pwr_mapping) @@ -3962,14 +3984,20 @@ static void stac92xx_pin_sense(struct hda_codec *codec, int idx) else idx = 1 << idx; - if (presence) + val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff; + if (enable) val &= ~idx; else val |= idx; /* power down unused output ports */ snd_hda_codec_write(codec, codec->afg, 0, 0x7ec, val); -}; +} + +static void stac92xx_pin_sense(struct hda_codec *codec, hda_nid_t nid) +{ + stac_toggle_power_map(codec, nid, get_hp_pin_presence(codec, nid)); +} static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res) { -- cgit v1.2.3 From 95026623da32848bc93fbfb472dc8737487df450 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 24 Nov 2008 07:51:11 +0100 Subject: ALSA: hda - No 'Headphone as Line-out' swich without line-outs STAC/IDT driver creates "Headphone as Line-Out" switch even if there is no line-out pins on the machine. For devices only with headpohnes and speaker-outs, this switch shouldn't be created. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 5a29699c6fdb..7f7d899ff13a 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2891,7 +2891,7 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, cfg->hp_outs && !spec->multiout.hp_nid) spec->multiout.hp_nid = nid; - if (cfg->hp_outs > 1) { + if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) { err = stac92xx_add_control(spec, STAC_CTL_WIDGET_HP_SWITCH, "Headphone as Line Out Switch", -- cgit v1.2.3 From c65574abad288d7123bd49e7906fa53b7e420239 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 21 Nov 2008 18:01:44 +0100 Subject: ALSA: hda - mark Dell studio 1535 quirk Fixed the quirk string for Dell studio 1535 (the product name wasn't published at the time the patch was made). Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 7f7d899ff13a..cc4d651ce062 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1617,7 +1617,7 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_92HD73XX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254, - "unknown Dell", STAC_DELL_M6), + "Dell Studio 1535", STAC_DELL_M6), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255, "unknown Dell", STAC_DELL_M6), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0256, -- cgit v1.2.3 From 661cd8fb5210af78f0763071642e0764a10389a6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 25 Nov 2008 15:18:29 +0100 Subject: ALSA: hda - Check model for Dell 92HD73xx laptops Check the model type instead of PCI SSID for detection of the mic types on Dell laptops with IDT 92HD73xx codecs. In this way, a new laptop can be tested via model module option. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 4 ++- sound/pci/hda/patch_sigmatel.c | 47 ++++++++++++++----------- 2 files changed, 29 insertions(+), 22 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 147f1764d976..3cd2ad958176 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1076,7 +1076,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. STAC92HD73* ref Reference board - dell-m6 Dell desktops + dell-m6-amic Dell desktops/laptops with analog mics + dell-m6-dmic Dell desktops/laptops with digital mics + dell-m6 Dell desktops/laptops with both type of mics STAC9872 vaio Setup for VAIO FE550G/SZ110 diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index cc4d651ce062..5dd3e89f620a 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -70,7 +70,9 @@ enum { enum { STAC_92HD73XX_REF, - STAC_DELL_M6, + STAC_DELL_M6_AMIC, + STAC_DELL_M6_DMIC, + STAC_DELL_M6_BOTH, STAC_DELL_EQ, STAC_92HD73XX_MODELS }; @@ -1602,13 +1604,17 @@ static unsigned int dell_m6_pin_configs[13] = { static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = { [STAC_92HD73XX_REF] = ref92hd73xx_pin_configs, - [STAC_DELL_M6] = dell_m6_pin_configs, + [STAC_DELL_M6_AMIC] = dell_m6_pin_configs, + [STAC_DELL_M6_DMIC] = dell_m6_pin_configs, + [STAC_DELL_M6_BOTH] = dell_m6_pin_configs, [STAC_DELL_EQ] = dell_m6_pin_configs, }; static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { [STAC_92HD73XX_REF] = "ref", - [STAC_DELL_M6] = "dell-m6", + [STAC_DELL_M6_AMIC] = "dell-m6-amic", + [STAC_DELL_M6_DMIC] = "dell-m6-dmic", + [STAC_DELL_M6_BOTH] = "dell-m6", [STAC_DELL_EQ] = "dell-eq", }; @@ -1617,21 +1623,23 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_92HD73XX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254, - "Dell Studio 1535", STAC_DELL_M6), + "Dell Studio 1535", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255, - "unknown Dell", STAC_DELL_M6), + "unknown Dell", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0256, - "unknown Dell", STAC_DELL_M6), + "unknown Dell", STAC_DELL_M6_BOTH), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0257, - "unknown Dell", STAC_DELL_M6), + "unknown Dell", STAC_DELL_M6_BOTH), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025e, - "unknown Dell", STAC_DELL_M6), + "unknown Dell", STAC_DELL_M6_AMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025f, - "unknown Dell", STAC_DELL_M6), + "unknown Dell", STAC_DELL_M6_AMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0271, - "unknown Dell", STAC_DELL_M6), + "unknown Dell", STAC_DELL_M6_DMIC), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0272, + "unknown Dell", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f, - "Dell Studio 15", STAC_DELL_M6), + "Dell Studio 1537", STAC_DELL_M6_DMIC), {} /* terminator */ }; @@ -4281,7 +4289,9 @@ again: case STAC_DELL_EQ: spec->init = dell_eq_core_init; /* fallthru */ - case STAC_DELL_M6: + case STAC_DELL_M6_AMIC: + case STAC_DELL_M6_DMIC: + case STAC_DELL_M6_BOTH: spec->num_smuxes = 0; spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER]; spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP]; @@ -4290,23 +4300,18 @@ again: if (!spec->init) spec->init = dell_m6_core_init; - switch (codec->subsystem_id) { - case 0x1028025e: /* Analog Mics */ - case 0x1028025f: + switch (spec->board_config) { + case STAC_DELL_M6_AMIC: /* Analog Mics */ stac92xx_set_config_reg(codec, 0x0b, 0x90A70170); spec->num_dmics = 0; spec->private_dimux.num_items = 1; break; - case 0x10280271: /* Digital Mics */ - case 0x10280272: - case 0x10280254: - case 0x10280255: + case STAC_DELL_M6_DMIC: /* Digital Mics */ stac92xx_set_config_reg(codec, 0x13, 0x90A60160); spec->num_dmics = 1; spec->private_dimux.num_items = 2; break; - case 0x10280256: /* Both */ - case 0x10280057: + case STAC_DELL_M6_BOTH: /* Both */ stac92xx_set_config_reg(codec, 0x0b, 0x90A70170); stac92xx_set_config_reg(codec, 0x13, 0x90A60160); spec->num_dmics = 1; -- cgit v1.2.3 From 5cf02b7bafddb6c3c16ddfb23d3ce187f70528ba Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 25 Nov 2008 00:42:37 -0500 Subject: x86: use limited register constraint for setnz Impact: build fix with certain compilers GCC can decide to use %dil when "r" is used, which is not valid for setnz. This bug was brought out by Stephen Rothwell's merging of the branch tracer into linux-next. [ Thanks to Uros Bizjak for recommending 'q' over 'Q' ] Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- arch/x86/boot/tty.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/boot/tty.c b/arch/x86/boot/tty.c index 0be77b39328a..7e8e8b25f5f6 100644 --- a/arch/x86/boot/tty.c +++ b/arch/x86/boot/tty.c @@ -74,7 +74,7 @@ static int kbd_pending(void) { u8 pending; asm volatile("int $0x16; setnz %0" - : "=rm" (pending) + : "=qm" (pending) : "a" (0x0100)); return pending; } -- cgit v1.2.3 From eff79aee91dd07e944df65fa448c8baeee7709d8 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 25 Nov 2008 14:13:03 +0100 Subject: arch/x86/kernel/pci-calgary_64.c: change simple_strtol to simple_strtoul Impact: fix theoretical option string parsing overflow Since bridge is unsigned, it would seem better to use simple_strtoul that simple_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r2@ long e; position p; @@ e = simple_strtol@p(...) @@ position p != r2.p; type T; T e; @@ e = - simple_strtol@p + simple_strtoul (...) // Signed-off-by: Julia Lawall Cc: muli@il.ibm.com Cc: jdmason@kudzu.us Cc: discuss@x86-64.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-calgary_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index e1e731d78f38..d28bbdc35e4e 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -1567,7 +1567,7 @@ static int __init calgary_parse_options(char *p) ++p; if (*p == '\0') break; - bridge = simple_strtol(p, &endp, 0); + bridge = simple_strtoul(p, &endp, 0); if (p == endp) break; -- cgit v1.2.3 From 292c669cd7087a090d6420e223eb1072f3e3c50b Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Tue, 25 Nov 2008 08:45:13 +0100 Subject: x86, bts: exclude ds.c from build when disabled Impact: cleanup Move the CONFIG guard from the .c file into the makefile. Reported-by: Andi Kleen Signed-off-by: Markus Metzger Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/ds.c | 3 --- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index e489ff9cb3e2..b62a7667828e 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -41,7 +41,7 @@ obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o obj-y += process.o obj-y += i387.o xsave.o obj-y += ptrace.o -obj-y += ds.o +obj-$(CONFIG_X86_DS) += ds.o obj-$(CONFIG_X86_32) += tls.o obj-$(CONFIG_IA32_EMULATION) += tls.o obj-y += step.o diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index d1a121443bde..4c8d57ec9663 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -21,8 +21,6 @@ */ -#ifdef CONFIG_X86_DS - #include #include @@ -878,4 +876,3 @@ void ds_free(struct ds_context *context) while (leftovers--) ds_put_context(context); } -#endif /* CONFIG_X86_DS */ -- cgit v1.2.3 From e5e8ca633bbe972eff6f84e064a63c0c08ed6c3d Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Tue, 25 Nov 2008 08:47:19 +0100 Subject: x86, bts: turn macro into static inline function Impact: cleanup Replace a macro with a static inline function. Signed-off-by: Markus Metzger Signed-off-by: Ingo Molnar --- arch/x86/include/asm/ds.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/ds.h b/arch/x86/include/asm/ds.h index 72c5a190bf48..a95008457ea4 100644 --- a/arch/x86/include/asm/ds.h +++ b/arch/x86/include/asm/ds.h @@ -23,12 +23,13 @@ #ifndef _ASM_X86_DS_H #define _ASM_X86_DS_H -#ifdef CONFIG_X86_DS #include #include +#ifdef CONFIG_X86_DS + struct task_struct; /* @@ -232,7 +233,8 @@ extern void ds_free(struct ds_context *context); #else /* CONFIG_X86_DS */ -#define ds_init_intel(config) do {} while (0) +struct cpuinfo_x86; +static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {} #endif /* CONFIG_X86_DS */ #endif /* _ASM_X86_DS_H */ -- cgit v1.2.3 From c4858ffc8f2dc850cb1f609c679b1ac1ad36ef0c Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Tue, 25 Nov 2008 08:49:06 +0100 Subject: x86, pebs: fix PEBS record size configuration Impact: fix DS hw enablement on 64-bit x86 Fix the PEBS record size in the DS configuration. Reported-by: Stephane Eranian Signed-off-by: Markus Metzger Signed-off-by: Ingo Molnar --- arch/x86/kernel/ds.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 4c8d57ec9663..04e38ef646af 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -816,13 +816,21 @@ static const struct ds_configuration ds_cfg_var = { .sizeof_ds = sizeof(long) * 12, .sizeof_field = sizeof(long), .sizeof_rec[ds_bts] = sizeof(long) * 3, +#ifdef __i386__ .sizeof_rec[ds_pebs] = sizeof(long) * 10 +#else + .sizeof_rec[ds_pebs] = sizeof(long) * 18 +#endif }; static const struct ds_configuration ds_cfg_64 = { .sizeof_ds = 8 * 12, .sizeof_field = 8, .sizeof_rec[ds_bts] = 8 * 3, +#ifdef __i386__ .sizeof_rec[ds_pebs] = 8 * 10 +#else + .sizeof_rec[ds_pebs] = 8 * 18 +#endif }; static inline void -- cgit v1.2.3 From de90add30e79261c3b5be68bb0f22d2ef98e8113 Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Tue, 25 Nov 2008 08:52:56 +0100 Subject: x86, bts: fix wrmsr and spinlock over kmalloc Impact: fix sleeping-with-spinlock-held bugs/crashes - Turn a wrmsr to write the DS_AREA MSR into a wrmsrl. - Use irqsave variants of spinlocks. - Do not allocate memory while holding spinlocks. Reported-by: Stephane Eranian Reported-by: Ingo Molnar Signed-off-by: Markus Metzger Signed-off-by: Ingo Molnar --- arch/x86/kernel/ds.c | 77 +++++++++++++++++++++++++++------------------------- 1 file changed, 40 insertions(+), 37 deletions(-) diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 04e38ef646af..a2d1176c38ee 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -209,14 +209,15 @@ static DEFINE_PER_CPU(struct ds_context *, system_context); static inline struct ds_context *ds_get_context(struct task_struct *task) { struct ds_context *context; + unsigned long irq; - spin_lock(&ds_lock); + spin_lock_irqsave(&ds_lock, irq); context = (task ? task->thread.ds_ctx : this_system_context); if (context) context->count++; - spin_unlock(&ds_lock); + spin_unlock_irqrestore(&ds_lock, irq); return context; } @@ -224,55 +225,46 @@ static inline struct ds_context *ds_get_context(struct task_struct *task) /* * Same as ds_get_context, but allocates the context and it's DS * structure, if necessary; returns NULL; if out of memory. - * - * pre: requires ds_lock to be held */ static inline struct ds_context *ds_alloc_context(struct task_struct *task) { struct ds_context **p_context = (task ? &task->thread.ds_ctx : &this_system_context); struct ds_context *context = *p_context; + unsigned long irq; if (!context) { - spin_unlock(&ds_lock); - context = kzalloc(sizeof(*context), GFP_KERNEL); - - if (!context) { - spin_lock(&ds_lock); + if (!context) return NULL; - } context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL); if (!context->ds) { kfree(context); - spin_lock(&ds_lock); return NULL; } - spin_lock(&ds_lock); - /* - * Check for race - another CPU could have allocated - * it meanwhile: - */ + spin_lock_irqsave(&ds_lock, irq); + if (*p_context) { kfree(context->ds); kfree(context); - return *p_context; - } - - *p_context = context; - context->this = p_context; - context->task = task; + context = *p_context; + } else { + *p_context = context; - if (task) - set_tsk_thread_flag(task, TIF_DS_AREA_MSR); + context->this = p_context; + context->task = task; - if (!task || (task == current)) - wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0); + if (task) + set_tsk_thread_flag(task, TIF_DS_AREA_MSR); - get_tracer(task); + if (!task || (task == current)) + wrmsrl(MSR_IA32_DS_AREA, + (unsigned long)context->ds); + } + spin_unlock_irqrestore(&ds_lock, irq); } context->count++; @@ -286,10 +278,12 @@ static inline struct ds_context *ds_alloc_context(struct task_struct *task) */ static inline void ds_put_context(struct ds_context *context) { + unsigned long irq; + if (!context) return; - spin_lock(&ds_lock); + spin_lock_irqsave(&ds_lock, irq); if (--context->count) goto out; @@ -311,7 +305,7 @@ static inline void ds_put_context(struct ds_context *context) kfree(context->ds); kfree(context); out: - spin_unlock(&ds_lock); + spin_unlock_irqrestore(&ds_lock, irq); } @@ -382,6 +376,7 @@ static int ds_request(struct task_struct *task, void *base, size_t size, struct ds_context *context; unsigned long buffer, adj; const unsigned long alignment = (1 << 3); + unsigned long irq; int error = 0; if (!ds_cfg.sizeof_ds) @@ -396,26 +391,27 @@ static int ds_request(struct task_struct *task, void *base, size_t size, return -EOPNOTSUPP; - spin_lock(&ds_lock); - - error = -ENOMEM; context = ds_alloc_context(task); if (!context) - goto out_unlock; + return -ENOMEM; + + spin_lock_irqsave(&ds_lock, irq); error = -EPERM; if (!check_tracer(task)) goto out_unlock; + get_tracer(task); + error = -EALREADY; if (context->owner[qual] == current) - goto out_unlock; + goto out_put_tracer; error = -EPERM; if (context->owner[qual] != NULL) - goto out_unlock; + goto out_put_tracer; context->owner[qual] = current; - spin_unlock(&ds_lock); + spin_unlock_irqrestore(&ds_lock, irq); error = -ENOMEM; @@ -463,10 +459,17 @@ static int ds_request(struct task_struct *task, void *base, size_t size, out_release: context->owner[qual] = NULL; ds_put_context(context); + put_tracer(task); + return error; + + out_put_tracer: + spin_unlock_irqrestore(&ds_lock, irq); + ds_put_context(context); + put_tracer(task); return error; out_unlock: - spin_unlock(&ds_lock); + spin_unlock_irqrestore(&ds_lock, irq); ds_put_context(context); return error; } -- cgit v1.2.3 From 121fe86bdf062af3fed1e998c08c3c272ae6dc99 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Fri, 17 Oct 2008 01:36:43 +0800 Subject: [CPUFREQ] Documentation: Add Blackfin to list of supported processors Signed-off-by: Robin Getz Signed-off-by: Bryan Wu Signed-off-by: Dave Jones --- Documentation/cpu-freq/user-guide.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index 6c442d8426b5..4f3f3840320e 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -23,6 +23,7 @@ Contents: 1.3 sparc64 1.4 ppc 1.5 SuperH +1.6 Blackfin 2. "Policy" / "Governor"? 2.1 Policy @@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq: SH-3 SH-4 +1.6 Blackfin +------------ + +The following Blackfin processors are supported by cpufreq: + +BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher +BF531, BF532, BF533, Rev 0.3 or higher +BF534, BF536, BF537, Rev 0.2 or higher +BF561, Rev 0.3 or higher +BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher + 2. "Policy" / "Governor" ? ========================== -- cgit v1.2.3 From a266d9f1253a38ec2d5655ebcd6846298b0554f4 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 21 Nov 2008 14:49:25 +0100 Subject: [CPUFREQ] powernow-k8: ignore out-of-range PstateStatus value A workaround for AMD CPU family 11h erratum 311 might cause that the P-state Status Register shows a "current P-state" which is larger than the "current P-state limit" in P-state Current Limit Register. For the wrong P-state value there is no ACPI _PSS object defined and powernow-k8/cpufreq can't determine the proper CPU frequency for that state. As a consequence this can cause a panic during boot (potentially with all recent kernel versions -- at least I have reproduced it with various 2.6.27 kernels and with the current .28 series), as an example: powernow-k8: Found 1 AMD Turion(tm)X2 Ultra DualCore Mobile ZM-82 processors (2 \ ) powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 1 (1100 MHz) powernow-k8: 2 : pstate 2 (600 MHz) BUG: unable to handle kernel paging request at ffff88086e7528b8 IP: [] cpufreq_stats_update+0x4a/0x5f PGD 202063 PUD 0 Oops: 0002 [#1] SMP last sysfs file: CPU 1 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.28-rc3-dirty #16 RIP: 0010:[] [] cpufreq_stats_update+0x4a/0\ f Synaptics claims to have extended capabilities, but I'm not able to read them.<6\ 6 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88006e7528c0 RDX: 00000000ffffffff RSI: ffff88006e54af00 RDI: ffffffff808f056c RBP: 00000000fffee697 R08: 0000000000000003 R09: ffff88006e73f080 R10: 0000000000000001 R11: 00000000002191c0 R12: ffff88006fb83c10 R13: 00000000ffffffff R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006fb50740(0000) knlGS:0000000000000000 Unable to initialize Synaptics hardware. CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffff88086e7528b8 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88006fb82000, task ffff88006fb816d0) Stack: ffff88006e74da50 0000000000000000 ffff88006e54af00 ffffffff804863c7 ffff88006e74da50 0000000000000000 00000000ffffffff 0000000000000000 ffff88006fb83c10 ffffffff8024b46c ffffffff808f0560 ffff88006fb83c10 Call Trace: [] ? cpufreq_stat_notifier_trans+0x51/0x83 [] ? notifier_call_chain+0x29/0x4c [] ? __srcu_notifier_call_chain+0x46/0x61 [] ? cpufreq_notify_transition+0x93/0xa9 [] ? powernowk8_target+0x1e8/0x5f3 [] ? cpufreq_governor_performance+0x1b/0x20 [] ? __cpufreq_governor+0x71/0xa8 [] ? __cpufreq_set_policy+0x101/0x13e [] ? cpufreq_add_dev+0x3f0/0x4cd [] ? handle_update+0x0/0x8 [] ? sysdev_driver_register+0xb6/0x10d [] ? powernowk8_init+0x0/0x7e [] ? cpufreq_register_driver+0x8f/0x140 [] ? _stext+0x56/0x14f [] ? proc_register+0x122/0x17d [] ? create_proc_entry+0x73/0x8a [] ? register_irq_proc+0x92/0xaa [] ? init_irq_proc+0x57/0x69 [] ? kernel_init+0x116/0x169 [] ? child_rip+0xa/0x11 [] ? kernel_init+0x0/0x169 [] ? child_rip+0x0/0x11 Code: 05 c5 83 36 00 48 c7 c2 48 5d 86 80 48 8b 04 d8 48 8b 40 08 48 8b 34 02 48\ RIP [] cpufreq_stats_update+0x4a/0x5f RSP CR2: ffff88086e7528b8 ---[ end trace 0678bac75e67a2f7 ]--- Kernel panic - not syncing: Attempted to kill init! In short, aftereffect of the wrong P-state is that cpufreq_stats_update() uses "-1" as index for some array in cpufreq_stats_update (unsigned int cpu) { ... if (stat->time_in_state) stat->time_in_state[stat->last_index] = cputime64_add(stat->time_in_state[stat->last_index], cputime_sub(cur_time, stat->last_time)); ... } Fortunately, the wrong P-state value is returned only if the core is in P-state 0. This fix solves the problem by detecting the out-of-range P-state, ignoring it, and using "0" instead. Cc: Mark Langsdorf Signed-off-by: Andreas Herrmann Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 18 +++++++++++++++--- arch/x86/kernel/cpu/cpufreq/powernow-k8.h | 17 ++++++++++++++++- 2 files changed, 31 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index d3dcd58b87cd..7f05f44b97e9 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -115,9 +115,20 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data) u32 i = 0; if (cpu_family == CPU_HW_PSTATE) { - rdmsr(MSR_PSTATE_STATUS, lo, hi); - i = lo & HW_PSTATE_MASK; - data->currpstate = i; + if (data->currpstate == HW_PSTATE_INVALID) { + /* read (initial) hw pstate if not yet set */ + rdmsr(MSR_PSTATE_STATUS, lo, hi); + i = lo & HW_PSTATE_MASK; + + /* + * a workaround for family 11h erratum 311 might cause + * an "out-of-range Pstate if the core is in Pstate-0 + */ + if (i >= data->numps) + data->currpstate = HW_PSTATE_0; + else + data->currpstate = i; + } return 0; } do { @@ -1121,6 +1132,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) } data->cpu = pol->cpu; + data->currpstate = HW_PSTATE_INVALID; if (powernow_k8_cpu_init_acpi(data)) { /* diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index ab48cfed4d96..65cfb5d7f77f 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -5,6 +5,19 @@ * http://www.gnu.org/licenses/gpl.html */ + +enum pstate { + HW_PSTATE_INVALID = 0xff, + HW_PSTATE_0 = 0, + HW_PSTATE_1 = 1, + HW_PSTATE_2 = 2, + HW_PSTATE_3 = 3, + HW_PSTATE_4 = 4, + HW_PSTATE_5 = 5, + HW_PSTATE_6 = 6, + HW_PSTATE_7 = 7, +}; + struct powernow_k8_data { unsigned int cpu; @@ -23,7 +36,9 @@ struct powernow_k8_data { u32 exttype; /* extended interface = 1 */ /* keep track of the current fid / vid or pstate */ - u32 currvid, currfid, currpstate; + u32 currvid; + u32 currfid; + enum pstate currpstate; /* the powernow_table includes all frequency and vid/fid pairings: * fid are the lower 8 bits of the index, vid are the upper 8 bits. -- cgit v1.2.3 From 9e0de91011ef6fe6eb3bb63f7ea15f586955660a Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 22 Nov 2008 12:38:24 +0100 Subject: ieee1394: sbp2: another iPod mini quirk entry Add another model ID of a broken firmware to prevent early I/O errors by acesses at the end of the disk. Reported at linux1394-user, http://marc.info/?t=122670842900002 Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index c52f6e6e8af2..3f5dbcb21605 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -400,6 +400,11 @@ static const struct { .model_id = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, + /* iPod mini */ { + .firmware_revision = 0x0a2700, + .model_id = 0x000022, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, + }, /* iPod mini */ { .firmware_revision = 0x0a2700, .model_id = 0x000023, -- cgit v1.2.3 From 031bb27c4bf77c2f60b3f3dea8cce63ef0d1fba9 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 22 Nov 2008 12:38:58 +0100 Subject: firewire: fw-sbp2: another iPod mini quirk entry Add another model ID of a broken firmware to prevent early I/O errors by acesses at the end of the disk. Reported at linux1394-user, http://marc.info/?t=122670842900002 Signed-off-by: Stefan Richter --- drivers/firewire/fw-sbp2.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 97df6dac3a82..e54403ee59e7 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -370,6 +370,11 @@ static const struct { .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, + /* iPod mini */ { + .firmware_revision = 0x0a2700, + .model = 0x000022, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, + }, /* iPod mini */ { .firmware_revision = 0x0a2700, .model = 0x000023, -- cgit v1.2.3 From e91af0af8677198346d5d29f09ab39bb3b0e3faf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 19 Nov 2008 01:22:51 +0100 Subject: iwlagn: fix DMA sync For the RX DMA fix for iwlwifi ("iwlagn: fix RX skb alignment") Luis pointed out: > aligned_dma_addr can obviously be > real_dma_addr at this point, what > guarantees we can use it on our own whim? I asked around, and he's right, there may be platforms that do not allow passing such such an address to the DMA API functions. This patch changes it by using the proper dma_sync_single_range_for_cpu API invented for this purpose. Cc: Luis R. Rodriguez Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 444c5cc05f03..c4c0371c763b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1384,9 +1384,11 @@ void iwl_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + dma_sync_single_range_for_cpu( + &priv->pci_dev->dev, rxb->real_dma_addr, + rxb->aligned_dma_addr - rxb->real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response -- cgit v1.2.3 From 3dd3b79aeadc6f6abc5cc78724d7df3dfcc1bd0b Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Thu, 20 Nov 2008 10:20:31 -0800 Subject: mac80211 : Fix setting ad-hoc mode and non-ibss channel Patch fixes the kernel trace when user tries to set ad-hoc mode on non IBSS channel. e.g iwconfig wlan0 chan 36 mode ad-hoc Signed-off-by: Abhijeet Kolekar Signed-off-by: John W. Linville --- net/mac80211/wext.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 742f811ca416..ab4ddba874be 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -271,6 +271,7 @@ static int ieee80211_ioctl_siwmode(struct net_device *dev, __u32 *mode, char *extra) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; int type; if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) @@ -281,6 +282,13 @@ static int ieee80211_ioctl_siwmode(struct net_device *dev, type = NL80211_IFTYPE_STATION; break; case IW_MODE_ADHOC: + /* Setting ad-hoc mode on non ibss channel is not + * supported. + */ + if (local->oper_channel && + (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS)) + return -EOPNOTSUPP; + type = NL80211_IFTYPE_ADHOC; break; case IW_MODE_REPEAT: -- cgit v1.2.3 From ca0c7e5101fd4f37fed8e851709f08580b92fbb3 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 20 Nov 2008 17:15:12 -0800 Subject: ath9k: Fix SW-IOMMU bounce buffer starvation This should fix the SW-IOMMU bounce buffer starvation seen ok kernel.org bugzilla 11811: http://bugzilla.kernel.org/show_bug.cgi?id=11811 Users on MacBook Pro 3.1/MacBook v2 would see something like: DMA: Out of SW-IOMMU space for 4224 bytes at device 0000:0b:00.0 Unfortunately its only easy to trigger on MacBook Pro 3.1/MacBook v2 so far so its difficult to debug (even with swiotlb=force). We were pci_unmap_single()'ing less bytes than what we called for with pci_map_single() and as such we were starving the swiotlb from its 64MB amount of bounce buffers. We remain consistent and now always use sc->rxbufsize for RX. While at it we update the beacon DMA maps as well to only use the data portion of the skb, previous to this we were pci_map_single()'ing more data for beaconing than what we tell the hardware it can use, therefore pushing more iotlb abuse. Still not sure why this is so easily triggerable on MacBook Pro 3.1, it may be the hardware configuration tends to use more memory > 3GB mark for DMA. Signed-off-by: Maciej Zenczykowski Signed-off-by: Bennyam Malavazi Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/beacon.c | 10 +++++----- drivers/net/wireless/ath9k/recv.c | 6 +++--- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index 9e15c30bbc06..4dd1c1bda0fb 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -170,7 +170,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) skb = (struct sk_buff *)bf->bf_mpdu; if (skb) { pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); } @@ -193,7 +193,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) bf->bf_buf_addr = bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); @@ -352,7 +352,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) if (bf->bf_mpdu != NULL) { skb = (struct sk_buff *)bf->bf_mpdu; pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; @@ -412,7 +412,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) bf->bf_buf_addr = bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); bf->bf_mpdu = skb; @@ -439,7 +439,7 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) if (bf->bf_mpdu != NULL) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 4983402af559..ad5f88879dc4 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -456,7 +456,7 @@ static int ath_rx_indicate(struct ath_softc *sc, if (nskb != NULL) { bf->bf_mpdu = nskb; bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data, - skb_end_pointer(nskb) - nskb->head, + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf; @@ -542,7 +542,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) bf->bf_mpdu = skb; bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf; @@ -1007,7 +1007,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) pci_dma_sync_single_for_cpu(sc->pdev, bf->bf_buf_addr, - skb_tailroom(skb), + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); pci_unmap_single(sc->pdev, bf->bf_buf_addr, -- cgit v1.2.3 From b4b6cda2298b0c9a0af902312184b775b8867c65 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 20 Nov 2008 17:15:13 -0800 Subject: ath9k: correct expected max RX buffer size We should only tell the hardware its capable of DMA'ing to us only what we asked dev_alloc_skb(). Prior to this it is possible a large RX'd frame could have corrupted DMA data but for us but we were saved only because we were previously also pci_map_single()'ing the same large value. The issue prior to this though was we were unmapping a smaller amount which the prior DMA patch fixed. Signed-off-by: Bennyam Malavazi Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/recv.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index ad5f88879dc4..504a0444d89f 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -49,10 +49,12 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) ASSERT(skb != NULL); ds->ds_vdata = skb->data; - /* setup rx descriptors */ + /* setup rx descriptors. The sc_rxbufsize here tells the harware + * how much data it can DMA to us and that we are prepared + * to process */ ath9k_hw_setuprxdesc(ah, ds, - skb_tailroom(skb), /* buffer size */ + sc->sc_rxbufsize, 0); if (sc->sc_rxlink == NULL) @@ -398,6 +400,13 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, * in rx'd frames. */ + /* Note: the kernel can allocate a value greater than + * what we ask it to give us. We really only need 4 KB as that + * is this hardware supports and in fact we need at least 3849 + * as that is the MAX AMSDU size this hardware supports. + * Unfortunately this means we may get 8 KB here from the + * kernel... and that is actually what is observed on some + * systems :( */ skb = dev_alloc_skb(len + sc->sc_cachelsz - 1); if (skb != NULL) { off = ((unsigned long) skb->data) % sc->sc_cachelsz; -- cgit v1.2.3 From 33ab625f2a23e743161f7ccd8e774ce3d3891339 Mon Sep 17 00:00:00 2001 From: Cheng Renquan Date: Sat, 22 Nov 2008 11:22:49 +0800 Subject: ath5k: fix Security issue in DebugFS part of ath5k MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit http://bugzilla.kernel.org/show_bug.cgi?id=12076 Remove any write access to groups and others, only keep write permission to its owner, usually only root user. Reported-by: Jérôme Poulin Signed-off-by: Cheng Renquan Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/debug.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 19980cbd5d5f..ccaeb5c219d2 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -417,19 +417,19 @@ ath5k_debug_init_device(struct ath5k_softc *sc) sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy), ath5k_global_debugfs); - sc->debug.debugfs_debug = debugfs_create_file("debug", 0666, + sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_debug); - sc->debug.debugfs_registers = debugfs_create_file("registers", 0444, + sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_registers); - sc->debug.debugfs_tsf = debugfs_create_file("tsf", 0666, + sc->debug.debugfs_tsf = debugfs_create_file("tsf", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_tsf); - sc->debug.debugfs_beacon = debugfs_create_file("beacon", 0666, + sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_beacon); - sc->debug.debugfs_reset = debugfs_create_file("reset", 0222, + sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR, sc->debug.debugfs_phydir, sc, &fops_reset); } -- cgit v1.2.3 From 02969b38e6f7cef80e71d673d1e512e029a7009f Mon Sep 17 00:00:00 2001 From: Martin Xu Date: Mon, 24 Nov 2008 10:49:27 +0800 Subject: ath5k: disable beacon filter when station is not associated Ath5k driver has too many interrupts per second at idle http://bugzilla.kernel.org/show_bug.cgi?id=11749 Signed-off-by: Martin Xu Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 35 ++++++++++++++++++++++++++++++++++- drivers/net/wireless/ath5k/base.h | 1 + 2 files changed, 35 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index cfd4d052d666..2d14255eb103 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -240,6 +240,10 @@ static u64 ath5k_get_tsf(struct ieee80211_hw *hw); static void ath5k_reset_tsf(struct ieee80211_hw *hw); static int ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb); +static void ath5k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes); static struct ieee80211_ops ath5k_hw_ops = { .tx = ath5k_tx, @@ -256,6 +260,7 @@ static struct ieee80211_ops ath5k_hw_ops = { .get_tx_stats = ath5k_get_tx_stats, .get_tsf = ath5k_get_tsf, .reset_tsf = ath5k_reset_tsf, + .bss_info_changed = ath5k_bss_info_changed, }; /* @@ -2942,7 +2947,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == NL80211_IFTYPE_STATION || + if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) || sc->opmode == NL80211_IFTYPE_ADHOC) { rfilt |= AR5K_RX_FILTER_BEACON; } @@ -3083,4 +3088,32 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) end: return ret; } +static void +set_beacon_filter(struct ieee80211_hw *hw, bool enable) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + u32 rfilt; + rfilt = ath5k_hw_get_rx_filter(ah); + if (enable) + rfilt |= AR5K_RX_FILTER_BEACON; + else + rfilt &= ~AR5K_RX_FILTER_BEACON; + ath5k_hw_set_rx_filter(ah, rfilt); + sc->filter_flags = rfilt; +} +static void ath5k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct ath5k_softc *sc = hw->priv; + if (changes & BSS_CHANGED_ASSOC) { + mutex_lock(&sc->lock); + sc->assoc = bss_conf->assoc; + if (sc->opmode == NL80211_IFTYPE_STATION) + set_beacon_filter(hw, sc->assoc); + mutex_unlock(&sc->lock); + } +} diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 06d1054ca94b..facc60ddada2 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -179,6 +179,7 @@ struct ath5k_softc { struct timer_list calib_tim; /* calibration timer */ int power_level; /* Requested tx power in dbm */ + bool assoc; /* assocate state */ }; #define ath5k_hw_hasbssidmask(_ah) \ -- cgit v1.2.3 From 020cf6ba7a91ccc5db359f91e9abba175fd3a0aa Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 23 Nov 2008 20:09:54 +0100 Subject: net/wireless/reg.c: fix bad WARN_ON in if statement fix: net/wireless/reg.c:348:29: error: macro "if" passed 2 arguments, but takes just 1 triggered by the branch-tracer. Signed-off-by: Ingo Molnar Signed-off-by: John W. Linville --- net/wireless/reg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 626dbb688499..eb3b1a9f9b12 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -343,9 +343,9 @@ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, return 0; return -EALREADY; } - if (WARN_ON(!is_alpha2_set(alpha2) || !is_an_alpha2(alpha2)), + if (WARN(!is_alpha2_set(alpha2) || !is_an_alpha2(alpha2), "Invalid Country IE regulatory hint passed " - "to the wireless core\n") + "to the wireless core\n")) return -EINVAL; /* We ignore Country IE hints for now, as we haven't yet * added the dot11MultiDomainCapabilityEnabled flag -- cgit v1.2.3 From 147dcf5489fb86c4bfe400520186f9f11b304783 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Tue, 25 Nov 2008 15:11:12 -0800 Subject: ARM: OMAP: Typo fix for clock_allow_idle The second clk_deny_idle instance should be clk_allow_idle instead. Signed-off-by: Amit Kucheria Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/pm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index 768eb6e7abcf..2a9c27ad4c37 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -128,7 +128,7 @@ void clk_deny_idle(struct clk *clk); * clk_allow_idle - Counters previous clk_deny_idle * @clk: clock signal handle */ -void clk_deny_idle(struct clk *clk); +void clk_allow_idle(struct clk *clk); extern void omap_pm_idle(void); extern void omap_pm_suspend(void); -- cgit v1.2.3 From ffd565a8b817d1eb4b25184e8418e8d96c3f56f6 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 25 Nov 2008 17:18:03 +0100 Subject: x86: fixup config space size of CPU functions for AMD family 11h Impact: extend allowed configuration space access on 11h CPUs from 256 to 4K Signed-off-by: Andreas Herrmann Acked-by: Jesse Barnes Signed-off-by: Ingo Molnar --- arch/x86/pci/fixup.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 3c27a809393b..2051dc96b8e9 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -496,21 +496,24 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015, pci_siemens_interrupt_controller); /* - * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config - * have 4096 bytes. Even if the device is capable, that doesn't mean we can - * access it. Maybe we don't have a way to generate extended config space - * accesses. So check it + * Regular PCI devices have 256 bytes, but AMD Family 10h/11h CPUs have + * 4096 bytes configuration space for each function of their processor + * configuration space. */ -static void fam10h_pci_cfg_space_size(struct pci_dev *dev) +static void amd_cpu_pci_cfg_space_size(struct pci_dev *dev) { dev->cfg_size = pci_cfg_space_size_ext(dev); } - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1300, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1301, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1302, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1303, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1304, amd_cpu_pci_cfg_space_size); /* * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from -- cgit v1.2.3 From 72e9622c2a2eb73d82c716504cc93d22cd3cfd8e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 25 Nov 2008 18:57:08 +0100 Subject: [ARM] pxa/pcm990: use negative number for an invalid GPIO in camera data 0 is a valid GPIO number, use a negative number to specify, that this camera doesn't have a GPIO for bus-width switching. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Eric Miao --- arch/arm/mach-pxa/pcm990-baseboard.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index f601425f1b1e..b36cec5c9eed 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -385,6 +385,7 @@ static struct soc_camera_link iclink[] = { .gpio = NR_BUILTIN_GPIO + 1, }, { .bus_id = 0, /* Must match with the camera ID above */ + .gpio = -ENXIO, } }; -- cgit v1.2.3 From 2fd36a5d6e830269a37f0f6ccfd34ee0517ebc7d Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 26 Nov 2008 12:51:42 +0800 Subject: [ARM] pxa/corgi: update default config to exclude tosa from being built Signed-off-by: Eric Miao --- arch/arm/configs/corgi_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index f3af0b593eb0..98765438048d 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y # CONFIG_MACH_AKITA is not set # CONFIG_MACH_SPITZ is not set # CONFIG_MACH_BORZOI is not set -CONFIG_MACH_TOSA=y +# CONFIG_MACH_TOSA is not set # CONFIG_ARCH_VIPER is not set # CONFIG_ARCH_PXA_ESERIES is not set # CONFIG_TRIZEPS_PXA is not set -- cgit v1.2.3 From 1d71da164d7fb40fac72c0406a4a531265916fc8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 25 Nov 2008 21:05:51 -0800 Subject: net: hp-plus uses eip_poll hp-plus uses 8390p.c, so it should use eip_poll(), not ei_poll(). drivers/built-in.o: In function `hpp_probe1': hp-plus.c:(.init.text+0x9cbd): undefined reference to `ei_poll' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/hp-plus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c index fbbd3e660c27..c01e290d09d2 100644 --- a/drivers/net/hp-plus.c +++ b/drivers/net/hp-plus.c @@ -230,7 +230,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr) dev->open = &hpp_open; dev->stop = &hpp_close; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; + dev->poll_controller = eip_poll; #endif ei_status.name = name; -- cgit v1.2.3 From 8f480c0e4e120911a673ed7385359bf76ae01963 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 25 Nov 2008 21:08:13 -0800 Subject: net: make skb_truesize_bug() call WARN() The truesize message check is important enough to make it print "BUG" to the user console... lets also make it important enough to spit a backtrace/module list etc so that kerneloops.org can track them. Signed-off-by: Arjan van de Ven Signed-off-by: David S. Miller --- net/core/skbuff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index d49ef8301b5b..65f7757465bd 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -149,7 +149,7 @@ void skb_under_panic(struct sk_buff *skb, int sz, void *here) void skb_truesize_bug(struct sk_buff *skb) { - printk(KERN_ERR "SKB BUG: Invalid truesize (%u) " + WARN(net_ratelimit(), KERN_ERR "SKB BUG: Invalid truesize (%u) " "len=%u, sizeof(sk_buff)=%Zd\n", skb->truesize, skb->len, sizeof(struct sk_buff)); } -- cgit v1.2.3 From 461cba2d294fe83297edf8a6556912812903dce1 Mon Sep 17 00:00:00 2001 From: Peng Li Date: Tue, 18 Nov 2008 12:39:02 +0800 Subject: drm/i915: Save/restore HWS_PGA on suspend/resume It fixes suspend/resume failure of xf86-video-intel dri2 branch. As dri2 branch doesn't call I830DRIResume() to restore hardware status page anymore, we need to preserve this register across suspend/resume. Signed-off-by: Peng Li Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_suspend.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index b24d522f490c..0a4f39b9a0ec 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -150,6 +150,7 @@ typedef struct drm_i915_private { u32 saveDSPBCNTR; u32 saveDSPARB; u32 saveRENDERSTANDBY; + u32 saveHWS; u32 savePIPEACONF; u32 savePIPEBCONF; u32 savePIPEASRC; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 5ddc6e595c0c..5d84027ee8f3 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -244,6 +244,9 @@ int i915_save_state(struct drm_device *dev) if (IS_I965G(dev) && IS_MOBILE(dev)) dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); + /* Hardware status page */ + dev_priv->saveHWS = I915_READ(HWS_PGA); + /* Display arbitration control */ dev_priv->saveDSPARB = I915_READ(DSPARB); @@ -373,6 +376,9 @@ int i915_restore_state(struct drm_device *dev) if (IS_I965G(dev) && IS_MOBILE(dev)) I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY); + /* Hardware status page */ + I915_WRITE(HWS_PGA, dev_priv->saveHWS); + /* Display arbitration */ I915_WRITE(DSPARB, dev_priv->saveDSPARB); -- cgit v1.2.3 From bd51126957eeac96d056c670545ff798c89f63f5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 26 Nov 2008 01:17:01 -0800 Subject: sungem: Fix PCS_MIICTRL register write in gem_init_phy(). Use writel not writeb. Noticed by Hermann Lauer. Signed-off-by: David S. Miller --- drivers/net/sungem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 4291458955ef..1349e419673c 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1714,7 +1714,7 @@ static void gem_init_phy(struct gem *gp) /* Reset PCS unit. */ val = readl(gp->regs + PCS_MIICTRL); val |= PCS_MIICTRL_RST; - writeb(val, gp->regs + PCS_MIICTRL); + writel(val, gp->regs + PCS_MIICTRL); limit = 32; while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { -- cgit v1.2.3 From cbbd695687caab1082a70d2ae81153fdba7e851c Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 24 Nov 2008 14:44:36 +0200 Subject: [MTD] [NAND] OMAP: OneNAND: header file relocation (part 2) Include and , not files from Signed-off-by: Adrian Hunter Signed-off-by: David Woodhouse --- drivers/mtd/onenand/omap2.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 28034ef08a82..a7e4d985f5ef 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -32,16 +32,15 @@ #include #include #include +#include +#include -#include #include #include #include #include #include -#include -#include #include #include -- cgit v1.2.3 From a3d3f73ccbd68b3557c4aaf9f6246ea21d922835 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 26 Nov 2008 10:23:25 +0000 Subject: [MTD] m25p80: fix detection of SPI parts Commit d0e8c47c58575b9131e786edb488fd029eba443e ("m25p80.c extended jedec support") added support for extended ids but in the process managed to break detection of all flashes. The ext jedec id check was inserted into an if statement that lacked braces, and it did not add the required braces. As such, the detection routine always returns the first entry in the SPI flash list. Signed-off-by: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 76a76751da36..a298fed6ab0c 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -574,10 +574,11 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi) for (tmp = 0, info = m25p_data; tmp < ARRAY_SIZE(m25p_data); tmp++, info++) { - if (info->jedec_id == jedec) + if (info->jedec_id == jedec) { if (ext_jedec != 0 && info->ext_id != ext_jedec) continue; return info; + } } dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); return NULL; -- cgit v1.2.3 From 9168ab861ae3eb8942da61d884a5c1980ba98a5f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 26 Nov 2008 10:23:35 +0000 Subject: [MTD] m25p80: fix detection of m25p16 flashes Commit d0e8c47c58575b9131e786edb488fd029eba443e ("m25p80.c extended jedec support") added support for extended ids but seems to break on flashes which don't have an extended id defined. If the table does not have an extid defined, then we should ignore it. Signed-off-by: Mike Frysinger Signed-off-by: Michael Hennerich Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index a298fed6ab0c..6188fd4ddcc0 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -575,7 +575,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi) tmp < ARRAY_SIZE(m25p_data); tmp++, info++) { if (info->jedec_id == jedec) { - if (ext_jedec != 0 && info->ext_id != ext_jedec) + if (info->ext_id != 0 && info->ext_id != ext_jedec) continue; return info; } -- cgit v1.2.3 From 7854643a91eade84112dca9768eeb8d32463d101 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Wed, 26 Nov 2008 10:23:57 +0000 Subject: [MTD] m25p80: chip erase != block erase != sector erase This fixes broken terminology added in the "m25p80.c erase enhance" patch, which added a chip erase command but called it "block erase". There are already two block erase commands; blocks are 4KiB or 32KiB. There's also a sector erase (usually 64 KiB). Chip erase typically covers Megabytes. OPCODE_BE ==> OPCODE_CHIP_ERASE erase_block ==> erase_chip [dbrownell@users.sourceforge.net: update sector erase comments too ] Signed-off-by: Chen Gong Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 6188fd4ddcc0..6659b2275c0c 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -37,9 +37,9 @@ #define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ #define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ #define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ -#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ +#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ #define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ -#define OPCODE_BE 0xc7 /* Erase whole flash block */ +#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ #define OPCODE_RDID 0x9f /* Read JEDEC ID */ @@ -167,7 +167,7 @@ static int wait_till_ready(struct m25p *flash) * * Returns 0 if successful, non-zero otherwise. */ -static int erase_block(struct m25p *flash) +static int erase_chip(struct m25p *flash) { DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n", flash->spi->dev.bus_id, __func__, @@ -181,7 +181,7 @@ static int erase_block(struct m25p *flash) write_enable(flash); /* Set up command buffer. */ - flash->command[0] = OPCODE_BE; + flash->command[0] = OPCODE_CHIP_ERASE; spi_write(flash->spi, flash->command, 1); @@ -250,15 +250,18 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) mutex_lock(&flash->lock); - /* REVISIT in some cases we could speed up erasing large regions - * by using OPCODE_SE instead of OPCODE_BE_4K - */ - - /* now erase those sectors */ - if (len == flash->mtd.size && erase_block(flash)) { + /* whole-chip erase? */ + if (len == flash->mtd.size && erase_chip(flash)) { instr->state = MTD_ERASE_FAILED; mutex_unlock(&flash->lock); return -EIO; + + /* REVISIT in some cases we could speed up erasing large regions + * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up + * to use "small sector erase", but that's not always optimal. + */ + + /* "sector"-at-a-time erase */ } else { while (len) { if (erase_sector(flash, addr)) { -- cgit v1.2.3 From 3136e903fa2d493ebc1b8a8fbdde2d3a17f85acd Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 26 Nov 2008 10:26:29 +0000 Subject: [MTD] physmap: fix memory leak on physmap_flash_remove by using devres physmap_flash_remove releases only last memory region. This causes memory leak if multiple resources were provided. This patch fixes this leakage by using devm_ functions. Signed-off-by: Atsushi Nemoto Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/maps/physmap.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-) diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 42d844f8f6bf..dfbf3f270cea 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #define MAX_RESOURCES 4 @@ -27,7 +27,6 @@ struct physmap_flash_info { struct mtd_info *mtd[MAX_RESOURCES]; struct mtd_info *cmtd; struct map_info map[MAX_RESOURCES]; - struct resource *res; #ifdef CONFIG_MTD_PARTITIONS int nr_parts; struct mtd_partition *parts; @@ -70,16 +69,7 @@ static int physmap_flash_remove(struct platform_device *dev) #endif map_destroy(info->mtd[i]); } - - if (info->map[i].virt != NULL) - iounmap(info->map[i].virt); - } - - if (info->res != NULL) { - release_resource(info->res); - kfree(info->res); } - return 0; } @@ -101,7 +91,8 @@ static int physmap_flash_probe(struct platform_device *dev) if (physmap_data == NULL) return -ENODEV; - info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL); + info = devm_kzalloc(&dev->dev, sizeof(struct physmap_flash_info), + GFP_KERNEL); if (info == NULL) { err = -ENOMEM; goto err_out; @@ -114,10 +105,10 @@ static int physmap_flash_probe(struct platform_device *dev) (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1), (unsigned long long)dev->resource[i].start); - info->res = request_mem_region(dev->resource[i].start, - dev->resource[i].end - dev->resource[i].start + 1, - dev->dev.bus_id); - if (info->res == NULL) { + if (!devm_request_mem_region(&dev->dev, + dev->resource[i].start, + dev->resource[i].end - dev->resource[i].start + 1, + dev->dev.bus_id)) { dev_err(&dev->dev, "Could not reserve memory region\n"); err = -ENOMEM; goto err_out; @@ -129,7 +120,8 @@ static int physmap_flash_probe(struct platform_device *dev) info->map[i].bankwidth = physmap_data->width; info->map[i].set_vpp = physmap_data->set_vpp; - info->map[i].virt = ioremap(info->map[i].phys, info->map[i].size); + info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys, + info->map[i].size); if (info->map[i].virt == NULL) { dev_err(&dev->dev, "Failed to ioremap flash region\n"); err = EIO; -- cgit v1.2.3 From 6c475352e87224a8f0b8cc6f6cc96b30563dc5b4 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 25 Nov 2008 15:33:10 +0100 Subject: KVM: MMU: avoid creation of unreachable pages in the shadow It is possible for a shadow page to have a parent link pointing to a freed page. When zapping a high level table, kvm_mmu_page_unlink_children fails to remove the parent_pte link. For that to happen, the child must be unreachable via the shadow tree, which can happen in shadow_walk_entry if the guest pte was modified in between walk() and fetch(). Remove the parent pte reference in such case. Possible cause for oops in bug #2217430. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/paging_tmpl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 613ec9aa674a..84eee43bbe74 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -331,6 +331,7 @@ static int FNAME(shadow_walk_entry)(struct kvm_shadow_walk *_sw, r = kvm_read_guest_atomic(vcpu->kvm, gw->pte_gpa[level - 2], &curr_pte, sizeof(curr_pte)); if (r || curr_pte != gw->ptes[level - 2]) { + kvm_mmu_put_page(shadow_page, sptep); kvm_release_pfn_clean(sw->pfn); sw->sptep = NULL; return 1; -- cgit v1.2.3 From 3ec192559033ed457f0d7856838654c100fc659f Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 26 Nov 2008 03:57:44 -0800 Subject: netfilter: ctnetlink: fix GFP_KERNEL allocation under spinlock The previous fix for the conntrack creation race (netfilter: ctnetlink: fix conntrack creation race) missed a GFP_KERNEL allocation that is now performed while holding a spinlock. Switch to GFP_ATOMIC. Reported-and-tested-by: Zoltan Borbely Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 3b009a3e8549..5f4a6516b3b6 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1138,7 +1138,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[], } } - nf_ct_acct_ext_add(ct, GFP_KERNEL); + nf_ct_acct_ext_add(ct, GFP_ATOMIC); #if defined(CONFIG_NF_CONNTRACK_MARK) if (cda[CTA_MARK]) -- cgit v1.2.3 From 545f4e99dee7284ed57c79384c5c1d5ac58dcd59 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Mon, 24 Nov 2008 11:44:27 -0500 Subject: Input: wacom - add support for new USB Tablet PCs Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom.h | 13 +-- drivers/input/tablet/wacom_sys.c | 228 ++++++++++++++++++++++++++++++++++----- drivers/input/tablet/wacom_wac.c | 160 ++++++++++++++++++++++++--- drivers/input/tablet/wacom_wac.h | 4 + 4 files changed, 356 insertions(+), 49 deletions(-) diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index ca62ec639f8f..677680e9f54f 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -66,6 +66,7 @@ * - Support Intuos3 4x6 * v1.47 (pc) - Added support for Bamboo * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX + * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) */ /* @@ -86,7 +87,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.48" +#define DRIVER_VERSION "v1.49" #define DRIVER_AUTHOR "Vojtech Pavlik " #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" @@ -103,15 +104,15 @@ struct wacom { struct usb_device *usbdev; struct usb_interface *intf; struct urb *irq; - struct wacom_wac * wacom_wac; + struct wacom_wac *wacom_wac; struct mutex lock; unsigned int open:1; char phys[32]; }; struct wacom_combo { - struct wacom * wacom; - struct urb * urb; + struct wacom *wacom; + struct urb *urb; }; extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo); @@ -132,7 +133,7 @@ extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wa extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac); extern __u16 wacom_le16_to_cpu(unsigned char *data); extern __u16 wacom_be16_to_cpu(unsigned char *data); -extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id); -extern const struct usb_device_id * get_device_table(void); +extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id); +extern const struct usb_device_id *get_device_table(void); #endif diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 5fbc463baf5a..7fe73586e024 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -14,8 +14,41 @@ #include "wacom.h" #include "wacom_wac.h" +/* defines to get HID report descriptor */ +#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01) +#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02) +#define HID_USAGE_UNDEFINED 0x00 +#define HID_USAGE_PAGE 0x05 +#define HID_USAGE_PAGE_DIGITIZER 0x0d +#define HID_USAGE_PAGE_DESKTOP 0x01 +#define HID_USAGE 0x09 +#define HID_USAGE_X 0x30 +#define HID_USAGE_Y 0x31 +#define HID_USAGE_X_TILT 0x3d +#define HID_USAGE_Y_TILT 0x3e +#define HID_USAGE_FINGER 0x22 +#define HID_USAGE_STYLUS 0x20 +#define HID_COLLECTION 0xc0 + +enum { + WCM_UNDEFINED = 0, + WCM_DESKTOP, + WCM_DIGITIZER, +}; + +struct hid_descriptor { + struct usb_descriptor_header header; + __le16 bcdHID; + u8 bCountryCode; + u8 bNumDescriptors; + u8 bDescriptorType; + __le16 wDescriptorLength; +} __attribute__ ((packed)); + +/* defines to get/set USB message */ #define USB_REQ_GET_REPORT 0x01 #define USB_REQ_SET_REPORT 0x09 +#define WAC_HID_FEATURE_REPORT 0x03 static int usb_get_report(struct usb_interface *intf, unsigned char type, unsigned char id, void *buf, int size) @@ -80,25 +113,21 @@ static void wacom_sys_irq(struct urb *urb) void wacom_report_key(void *wcombo, unsigned int key_type, int key_data) { input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data); - return; } void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data) { input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data); - return; } void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data) { input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data); - return; } void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value) { input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value); - return; } __u16 wacom_be16_to_cpu(unsigned char *data) @@ -118,7 +147,6 @@ __u16 wacom_le16_to_cpu(unsigned char *data) void wacom_input_sync(void *wcombo) { input_sync(get_input_dev((struct wacom_combo *)wcombo)); - return; } static int wacom_open(struct input_dev *dev) @@ -160,7 +188,7 @@ static void wacom_close(struct input_dev *dev) void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) | BIT_MASK(BTN_5); input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); } @@ -170,7 +198,7 @@ void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->evbit[0] |= BIT_MASK(EV_MSC); input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_4); } @@ -178,7 +206,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->evbit[0] |= BIT_MASK(EV_REL); input_dev->relbit[0] |= BIT_MASK(REL_WHEEL); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | + input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) | BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2); @@ -188,7 +216,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3); input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); @@ -196,14 +224,14 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) | BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7); input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); } void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9); + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9); } void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) @@ -211,7 +239,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL); input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL); input_dev->relbit[0] |= BIT_MASK(REL_WHEEL); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | + input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) | @@ -228,8 +256,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) | - BIT_MASK(BTN_TOOL_RUBBER); + input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2); } void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) @@ -237,15 +264,129 @@ void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER); } +static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc, + struct wacom_wac *wacom_wac) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct wacom_features *features = wacom_wac->features; + char limit = 0, result = 0; + int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0; + unsigned char *report; + + report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL); + if (!report) + return -ENOMEM; + + /* retrive report descriptors */ + do { + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_GET_DESCRIPTOR, + USB_RECIP_INTERFACE | USB_DIR_IN, + HID_DEVICET_REPORT << 8, + intf->altsetting[0].desc.bInterfaceNumber, /* interface */ + report, + hid_desc->wDescriptorLength, + 5000); /* 5 secs */ + } while (result < 0 && limit++ < 5); + + if (result < 0) + goto out; + + for (i = 0; i < hid_desc->wDescriptorLength; i++) { + + switch (report[i]) { + case HID_USAGE_PAGE: + switch (report[i + 1]) { + case HID_USAGE_PAGE_DIGITIZER: + usage = WCM_DIGITIZER; + i++; + break; + + case HID_USAGE_PAGE_DESKTOP: + usage = WCM_DESKTOP; + i++; + break; + } + break; + + case HID_USAGE: + switch (report[i + 1]) { + case HID_USAGE_X: + if (usage == WCM_DESKTOP) { + if (finger) { + features->touch_x_max = + features->touch_y_max = + wacom_le16_to_cpu(&report[i + 3]); + features->x_max = + wacom_le16_to_cpu(&report[i + 6]); + i += 7; + } else if (pen) { + features->x_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + } + } else if (usage == WCM_DIGITIZER) { + /* max pressure isn't reported + features->pressure_max = (unsigned short) + (report[i+4] << 8 | report[i + 3]); + */ + features->pressure_max = 255; + i += 4; + } + break; + + case HID_USAGE_Y: + if (usage == WCM_DESKTOP) + features->y_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + break; + + case HID_USAGE_FINGER: + finger = 1; + i++; + break; + + case HID_USAGE_STYLUS: + pen = 1; + i++; + break; + + case HID_USAGE_UNDEFINED: + if (usage == WCM_DESKTOP && finger) /* capacity */ + features->pressure_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + break; + } + break; + + case HID_COLLECTION: + /* reset UsagePage ans Finger */ + finger = usage = 0; + break; + } + } + + result = 0; + + out: + kfree(report); + return result; +} + static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *interface = intf->cur_altsetting; struct usb_endpoint_descriptor *endpoint; struct wacom *wacom; struct wacom_wac *wacom_wac; + struct wacom_features *features; struct input_dev *input_dev; int error = -ENOMEM; char rep_data[2], limit = 0; + struct hid_descriptor *hid_desc; wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL); @@ -268,8 +409,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); - wacom_wac->features = get_wacom_feature(id); - BUG_ON(wacom_wac->features->pktlen > 10); + wacom_wac->features = features = get_wacom_feature(id); + BUG_ON(features->pktlen > 10); input_dev->name = wacom_wac->features->name; wacom->wacom_wac = wacom_wac; @@ -282,18 +423,37 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i input_dev->open = wacom_open; input_dev->close = wacom_close; + endpoint = &intf->cur_altsetting->endpoint[0].desc; + + /* TabletPC need to retrieve the physical and logical maximum from report descriptor */ + if (wacom_wac->features->type == TABLETPC) { + if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { + if (usb_get_extra_descriptor(&interface->endpoint[0], + HID_DEVICET_REPORT, &hid_desc)) { + printk("wacom: can not retrive extra class descriptor\n"); + goto fail2; + } + } + error = wacom_parse_hid(intf, hid_desc, wacom_wac); + if (error) + goto fail2; + } + input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS); - input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0); - input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0); + input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0); + if (features->type == TABLETPC) { + input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP); + input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0); + input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0); + } input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC); wacom_init_input_dev(input_dev, wacom_wac); - endpoint = &intf->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb(wacom->irq, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress), wacom_wac->data, wacom_wac->features->pktlen, @@ -305,13 +465,22 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i if (error) goto fail3; - /* Ask the tablet to report tablet data. Repeat until it succeeds */ - do { - rep_data[0] = 2; - rep_data[1] = 2; - usb_set_report(intf, 3, 2, rep_data, 2); - usb_get_report(intf, 3, 2, rep_data, 2); - } while (rep_data[1] != 2 && limit++ < 5); + /* + * Ask the tablet to report tablet data if it is not a Tablet PC. + * Repeat until it succeeds + */ + if (wacom_wac->features->type != TABLETPC) { + do { + rep_data[0] = 2; + rep_data[1] = 2; + error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, + 2, rep_data, 2); + if (error >= 0) + error = usb_get_report(intf, + WAC_HID_FEATURE_REPORT, 2, + rep_data, 2); + } while ((error < 0 || rep_data[1] != 2) && limit++ < 5); + } usb_set_intfdata(intf, wacom); return 0; @@ -333,7 +502,8 @@ static void wacom_disconnect(struct usb_interface *intf) usb_kill_urb(wacom->irq); input_unregister_device(wacom->dev); usb_free_urb(wacom->irq); - usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma); + usb_buffer_free(interface_to_usbdev(intf), 10, + wacom->wacom_wac->data, wacom->data_dma); kfree(wacom->wacom_wac); kfree(wacom); } diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index bf3d9a8b2c1b..8dc8d1e59bea 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -535,31 +535,147 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) return 1; } +int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo) +{ + char *data = wacom->data; + int prox = 0, pressure; + static int stylusInProx, touchInProx = 1, touchOut; + struct urb *urb = ((struct wacom_combo *)wcombo)->urb; + + dbg("wacom_tpc_irq: received report #%d", data[0]); + + if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */ + if (urb->actual_length == 5) { /* with touch */ + prox = data[0] & 0x03; + } else { /* with capacity */ + prox = data[1] & 0x03; + } + + if (!stylusInProx) { /* stylus not in prox */ + if (prox) { + if (touchInProx) { + wacom->tool[1] = BTN_TOOL_DOUBLETAP; + wacom->id[0] = TOUCH_DEVICE_ID; + if (urb->actual_length != 5) { + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6])); + wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6])); + } else { + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3])); + wacom_report_key(wcombo, BTN_TOUCH, 1); + } + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], prox & 0x01); + touchOut = 1; + return 1; + } + } else { + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], prox & 0x01); + wacom_report_key(wcombo, BTN_TOUCH, 0); + touchOut = 0; + touchInProx = 1; + return 1; + } + } else if (touchOut || !prox) { /* force touch out-prox */ + wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID); + wacom_report_key(wcombo, BTN_TOUCH, 0); + touchOut = 0; + touchInProx = 1; + return 1; + } + } else if (data[0] == 2) { /* Penabled */ + prox = data[1] & 0x20; + + touchInProx = 0; + + wacom->id[0] = ERASER_DEVICE_ID; + + /* + * if going from out of proximity into proximity select between the eraser + * and the pen based on the state of the stylus2 button, choose eraser if + * pressed else choose pen. if not a proximity change from out to in, send + * an out of proximity for previous tool then a in for new tool. + */ + if (prox) { /* in prox */ + if (!wacom->tool[0]) { + /* Going into proximity select tool */ + wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + if (wacom->tool[1] == BTN_TOOL_PEN) + wacom->id[0] = STYLUS_DEVICE_ID; + } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) { + /* + * was entered with stylus2 pressed + * report out proximity for previous tool + */ + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], 0); + wacom_input_sync(wcombo); + + /* set new tool */ + wacom->tool[1] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + return 0; + } + if (wacom->tool[1] != BTN_TOOL_RUBBER) { + /* Unknown tool selected default to pen tool */ + wacom->tool[1] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + } + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10); + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + pressure = ((data[7] & 0x01) << 8) | data[6]; + if (pressure < 0) + pressure = wacom->features->pressure_max + pressure + 1; + wacom_report_abs(wcombo, ABS_PRESSURE, pressure); + wacom_report_key(wcombo, BTN_TOUCH, pressure); + } else { + wacom_report_abs(wcombo, ABS_PRESSURE, 0); + wacom_report_key(wcombo, BTN_STYLUS, 0); + wacom_report_key(wcombo, BTN_STYLUS2, 0); + wacom_report_key(wcombo, BTN_TOUCH, 0); + } + wacom_report_key(wcombo, wacom->tool[1], prox); + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + stylusInProx = prox; + wacom->tool[0] = prox; + return 1; + } + return 0; +} + int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo) { switch (wacom_wac->features->type) { case PENPARTNER: - return (wacom_penpartner_irq(wacom_wac, wcombo)); - break; + return wacom_penpartner_irq(wacom_wac, wcombo); + case PL: - return (wacom_pl_irq(wacom_wac, wcombo)); - break; + return wacom_pl_irq(wacom_wac, wcombo); + case WACOM_G4: case GRAPHIRE: case WACOM_MO: - return (wacom_graphire_irq(wacom_wac, wcombo)); - break; + return wacom_graphire_irq(wacom_wac, wcombo); + case PTU: - return (wacom_ptu_irq(wacom_wac, wcombo)); - break; + return wacom_ptu_irq(wacom_wac, wcombo); + case INTUOS: case INTUOS3S: case INTUOS3: case INTUOS3L: case CINTIQ: case WACOM_BEE: - return (wacom_intuos_irq(wacom_wac, wcombo)); - break; + return wacom_intuos_irq(wacom_wac, wcombo); + + case TABLETPC: + return wacom_tpc_irq(wacom_wac, wcombo); + default: return 0; } @@ -586,13 +702,15 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w /* fall through */ case INTUOS3S: input_dev_i3s(input_dev, wacom_wac); + /* fall through */ case INTUOS: input_dev_i(input_dev, wacom_wac); break; case PL: case PTU: + case TABLETPC: input_dev_pl(input_dev, wacom_wac); - break; + /* fall through */ case PENPARTNER: input_dev_pt(input_dev, wacom_wac); break; @@ -611,6 +729,7 @@ static struct wacom_features wacom_features[] = { { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 }, { "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO }, { "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO }, + { "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE }, { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE }, { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE }, { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, @@ -650,6 +769,10 @@ static struct wacom_features wacom_features[] = { { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ }, { "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE }, { "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE }, + { "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL }, + { "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC }, + { "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC }, + { "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, { } }; @@ -665,6 +788,7 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, @@ -704,18 +828,26 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, { } }; -const struct usb_device_id * get_device_table(void) { - const struct usb_device_id * id_table = wacom_ids; +const struct usb_device_id *get_device_table(void) +{ + const struct usb_device_id *id_table = wacom_ids; + return id_table; } -struct wacom_features * get_wacom_feature(const struct usb_device_id * id) { +struct wacom_features * get_wacom_feature(const struct usb_device_id *id) +{ int index = id - wacom_ids; struct wacom_features *wf = &wacom_features[index]; + return wf; } diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 3342bc05847d..f9c8b69673b7 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -10,6 +10,7 @@ #define WACOM_WAC_H #define STYLUS_DEVICE_ID 0x02 +#define TOUCH_DEVICE_ID 0x03 #define CURSOR_DEVICE_ID 0x06 #define ERASER_DEVICE_ID 0x0A #define PAD_DEVICE_ID 0x0F @@ -27,6 +28,7 @@ enum { CINTIQ, WACOM_BEE, WACOM_MO, + TABLETPC, MAX_TYPE }; @@ -38,6 +40,8 @@ struct wacom_features { int pressure_max; int distance_max; int type; + int touch_x_max; + int touch_y_max; }; struct wacom_wac { -- cgit v1.2.3 From a98ee8c1c707fe3210b00ef9f806ba8e2bf35504 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 26 Nov 2008 19:32:33 +0000 Subject: [CIFS] fix regression in cifs_write_begin/cifs_write_end The conversion to write_begin/write_end interfaces had a bug where we were passing a bad parameter to cifs_readpage_worker. Rather than passing the page offset of the start of the write, we needed to pass the offset of the beginning of the page. This was reliably showing up as data corruption in the fsx-linux test from LTP. It also became evident that this code was occasionally doing unnecessary read calls. Optimize those away by using the PG_checked flag to indicate that the unwritten part of the page has been initialized. CC: Nick Piggin Acked-by: Dave Kleikamp Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/file.c | 77 ++++++++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 56 insertions(+), 21 deletions(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index b691b893a848..f0a81e631ae6 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1475,7 +1475,11 @@ static int cifs_write_end(struct file *file, struct address_space *mapping, cFYI(1, ("write_end for page %p from pos %lld with %d bytes", page, pos, copied)); - if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE) + if (PageChecked(page)) { + if (copied == len) + SetPageUptodate(page); + ClearPageChecked(page); + } else if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE) SetPageUptodate(page); if (!PageUptodate(page)) { @@ -2062,39 +2066,70 @@ static int cifs_write_begin(struct file *file, struct address_space *mapping, { pgoff_t index = pos >> PAGE_CACHE_SHIFT; loff_t offset = pos & (PAGE_CACHE_SIZE - 1); + loff_t page_start = pos & PAGE_MASK; + loff_t i_size; + struct page *page; + int rc = 0; cFYI(1, ("write_begin from %lld len %d", (long long)pos, len)); - *pagep = __grab_cache_page(mapping, index); - if (!*pagep) - return -ENOMEM; - - if (PageUptodate(*pagep)) - return 0; + page = __grab_cache_page(mapping, index); + if (!page) { + rc = -ENOMEM; + goto out; + } - /* If we are writing a full page it will be up to date, - no need to read from the server */ - if (len == PAGE_CACHE_SIZE && flags & AOP_FLAG_UNINTERRUPTIBLE) - return 0; + if (PageUptodate(page)) + goto out; - if ((file->f_flags & O_ACCMODE) != O_WRONLY) { - int rc; + /* + * If we write a full page it will be up to date, no need to read from + * the server. If the write is short, we'll end up doing a sync write + * instead. + */ + if (len == PAGE_CACHE_SIZE) + goto out; - /* might as well read a page, it is fast enough */ - rc = cifs_readpage_worker(file, *pagep, &offset); + /* + * optimize away the read when we have an oplock, and we're not + * expecting to use any of the data we'd be reading in. That + * is, when the page lies beyond the EOF, or straddles the EOF + * and the write will cover all of the existing data. + */ + if (CIFS_I(mapping->host)->clientCanCacheRead) { + i_size = i_size_read(mapping->host); + if (page_start >= i_size || + (offset == 0 && (pos + len) >= i_size)) { + zero_user_segments(page, 0, offset, + offset + len, + PAGE_CACHE_SIZE); + /* + * PageChecked means that the parts of the page + * to which we're not writing are considered up + * to date. Once the data is copied to the + * page, it can be set uptodate. + */ + SetPageChecked(page); + goto out; + } + } - /* we do not need to pass errors back - e.g. if we do not have read access to the file - because cifs_write_end will attempt synchronous writes - -- shaggy */ + if ((file->f_flags & O_ACCMODE) != O_WRONLY) { + /* + * might as well read a page, it is fast enough. If we get + * an error, we don't need to return it. cifs_write_end will + * do a sync write instead since PG_uptodate isn't set. + */ + cifs_readpage_worker(file, page, &page_start); } else { /* we could try using another file handle if there is one - but how would we lock it to prevent close of that handle racing with this read? In any case this will be written out by write_end so is fine */ } - - return 0; +out: + *pagep = page; + return rc; } const struct address_space_operations cifs_addr_ops = { -- cgit v1.2.3 From 7b4d469228a92a00e412675817cedd60133de38a Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Thu, 13 Nov 2008 12:00:03 +0300 Subject: ACPI: EC: count interrupts only if called from interrupt handler. fix 2.6.28 EC interrupt storm regression Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index cf41f9fc24a7..30f3ef236ecb 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -219,7 +219,8 @@ static void gpe_transaction(struct acpi_ec *ec, u8 status) goto unlock; err: /* false interrupt, state didn't change */ - ++ec->curr->irq_count; + if (in_interrupt()) + ++ec->curr->irq_count; unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } -- cgit v1.2.3 From 9860d1b08b082ffb54c4b7827c48c2728e12ba21 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 16 Nov 2008 12:04:13 +0100 Subject: parisc: __kernel_time_t is always long __kernel_time_t is always long on PA-RISC, irrespective of CONFIG_64BIT, hence move it out of the #ifdef CONFIG_64BIT / #else / #endif block. Signed-off-by: Geert Uytterhoeven Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/posix_types.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/parisc/include/asm/posix_types.h b/arch/parisc/include/asm/posix_types.h index bb725a6630bb..00da29a340ba 100644 --- a/arch/parisc/include/asm/posix_types.h +++ b/arch/parisc/include/asm/posix_types.h @@ -24,13 +24,12 @@ typedef int __kernel_daddr_t; typedef unsigned long __kernel_size_t; typedef long __kernel_ssize_t; typedef long __kernel_ptrdiff_t; -typedef long __kernel_time_t; #else typedef unsigned int __kernel_size_t; typedef int __kernel_ssize_t; typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; #endif +typedef long __kernel_time_t; typedef char * __kernel_caddr_t; typedef unsigned short __kernel_uid16_t; -- cgit v1.2.3 From 7a3f5134a8f5bd7fa38b5645eef05e8a4eb62951 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 26 Nov 2008 12:46:22 -0800 Subject: parisc: fix kernel crash when unwinding a userspace process Any user on existing parisc 32- and 64bit-kernels can easily crash the kernel and as such enforce a DSO. A simple testcase is available here: http://gsyprf10.external.hp.com/~deller/crash.tgz The problem is introduced by the fact, that the handle_interruption() crash handler calls the show_regs() function, which in turn tries to unwind the stack by calling parisc_show_stack(). Since the stack contains userspace addresses, a try to unwind the stack is dangerous and useless and leads to the crash. The fix is trivial: For userspace processes a) avoid to unwind the stack, and b) avoid to resolve userspace addresses to kernel symbol names. While touching this code, I converted print_symbol() to %pS printk formats and made parisc_show_stack() static. An initial patch for this was written by Kyle McMartin back in August: http://marc.info/?l=linux-parisc&m=121805168830283&w=2 Compile and run-tested with a 64bit parisc kernel. Signed-off-by: Helge Deller Cc: Grant Grundler Cc: Matthew Wilcox Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, earlier...] Signed-off-by: Andrew Morton Signed-off-by: Kyle McMartin --- arch/parisc/kernel/traps.c | 43 +++++++++++++++++++++---------------------- 1 file changed, 21 insertions(+), 22 deletions(-) diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index 675f1d098f05..4c771cd580ec 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include @@ -51,7 +50,7 @@ DEFINE_SPINLOCK(pa_dbit_lock); #endif -void parisc_show_stack(struct task_struct *t, unsigned long *sp, +static void parisc_show_stack(struct task_struct *task, unsigned long *sp, struct pt_regs *regs); static int printbinary(char *buf, unsigned long x, int nbits) @@ -121,18 +120,19 @@ static void print_fr(char *level, struct pt_regs *regs) void show_regs(struct pt_regs *regs) { - int i; + int i, user; char *level; unsigned long cr30, cr31; - level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT; + user = user_mode(regs); + level = user ? KERN_DEBUG : KERN_CRIT; print_gr(level, regs); for (i = 0; i < 8; i += 4) PRINTREGS(level, regs->sr, "sr", RFMT, i); - if (user_mode(regs)) + if (user) print_fr(level, regs); cr30 = mfctl(30); @@ -145,14 +145,18 @@ void show_regs(struct pt_regs *regs) printk("%s CPU: %8d CR30: " RFMT " CR31: " RFMT "\n", level, current_thread_info()->cpu, cr30, cr31); printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28); - printk(level); - print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]); - printk(level); - print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]); - printk(level); - print_symbol(" RP(r2): %s\n", regs->gr[2]); - - parisc_show_stack(current, NULL, regs); + + if (user) { + printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]); + printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]); + printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]); + } else { + printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]); + printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]); + printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]); + + parisc_show_stack(current, NULL, regs); + } } @@ -173,20 +177,15 @@ static void do_show_stack(struct unwind_frame_info *info) break; if (__kernel_text_address(info->ip)) { - printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip); -#ifdef CONFIG_KALLSYMS - print_symbol("%s\n", info->ip); -#else - if ((i & 0x03) == 0) - printk("\n"); -#endif + printk(KERN_CRIT " [<" RFMT ">] %pS\n", + info->ip, (void *) info->ip); i++; } } - printk("\n"); + printk(KERN_CRIT "\n"); } -void parisc_show_stack(struct task_struct *task, unsigned long *sp, +static void parisc_show_stack(struct task_struct *task, unsigned long *sp, struct pt_regs *regs) { struct unwind_frame_info info; -- cgit v1.2.3 From 90f671301a5e2678cdc99f611cd842161c3bb87f Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 7 Nov 2008 01:42:46 +0100 Subject: parisc: struct device - replace bus_id with dev_name(), dev_set_name() (I did not compile or test it, please let me know, or help fixing it, if something is wrong with the conversion) This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Thanks, Kay Cc: Matthew Wilcox Cc: linux-parisc@vger.kernel.org Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/parisc-device.h | 4 ++-- arch/parisc/kernel/drivers.c | 6 ++++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/parisc/include/asm/parisc-device.h b/arch/parisc/include/asm/parisc-device.h index 7aa13f2add7a..9afdad6c2ffb 100644 --- a/arch/parisc/include/asm/parisc-device.h +++ b/arch/parisc/include/asm/parisc-device.h @@ -42,9 +42,9 @@ struct parisc_driver { #define to_parisc_driver(d) container_of(d, struct parisc_driver, drv) #define parisc_parent(d) to_parisc_device(d->dev.parent) -static inline char *parisc_pathname(struct parisc_device *d) +static inline const char *parisc_pathname(struct parisc_device *d) { - return d->dev.bus_id; + return dev_name(&d->dev); } static inline void diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index 2ca654bd6322..884b7ce16a3b 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -43,7 +43,7 @@ struct hppa_dma_ops *hppa_dma_ops __read_mostly; EXPORT_SYMBOL(hppa_dma_ops); static struct device root = { - .bus_id = "parisc", + .init_name = "parisc", }; static inline int check_dev(struct device *dev) @@ -393,7 +393,8 @@ EXPORT_SYMBOL(print_pci_hwpath); static void setup_bus_id(struct parisc_device *padev) { struct hardware_path path; - char *output = padev->dev.bus_id; + char name[20]; + char *output = name; int i; get_node_path(padev->dev.parent, &path); @@ -404,6 +405,7 @@ static void setup_bus_id(struct parisc_device *padev) output += sprintf(output, "%u:", (unsigned char) path.bc[i]); } sprintf(output, "%u", (unsigned char) padev->hw_path); + dev_set_name(&padev->dev, name); } struct parisc_device * create_tree_node(char id, struct device *parent) -- cgit v1.2.3 From 558073dd56707864f09d563b64e7c37c021e89d2 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 21 Nov 2008 22:41:01 +0800 Subject: ACPI: battery: Convert discharge energy rate to current properly ACPI battery interface reports its state either in mW or in mA, and discharge rate in your case is reported in mW. power_supply interface does not have such a parameter, so current_now parameter is used for all cases. But in case of mW, reported discharge should be converted into mA. Signed-off-by: Alexey Starikovskiy Tested-by: Ferenc Wagner Signed-off-by: Len Brown --- drivers/acpi/battery.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 1423b0c0cd2e..a0a178dd189c 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -174,6 +174,15 @@ static int acpi_battery_get_property(struct power_supply *psy, break; case POWER_SUPPLY_PROP_CURRENT_NOW: val->intval = battery->current_now * 1000; + /* if power units are mW, convert to mA by + dividing by current voltage (mV/1000) */ + if (!battery->power_unit) { + if (battery->voltage_now) { + val->intval /= battery->voltage_now; + val->intval *= 1000; + } else + val->intval = -1; + } break; case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: -- cgit v1.2.3 From 723fdb781abfe78d8ba7d911abbb581722348aa7 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 26 Nov 2008 14:35:16 -0800 Subject: ARM: OMAP: Fixes for suspend / resume GPIO wake-up handling Use the correct wake-up enable register, and make it work with 34xx also. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 8679fbca6bbe..424049d83fbe 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -101,6 +101,7 @@ #define OMAP24XX_GPIO_IRQSTATUS2 0x0028 #define OMAP24XX_GPIO_IRQENABLE2 0x002c #define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_WAKE_EN 0x0020 #define OMAP24XX_GPIO_CTRL 0x0030 #define OMAP24XX_GPIO_OE 0x0034 #define OMAP24XX_GPIO_DATAIN 0x0038 @@ -1551,7 +1552,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: - wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA; + wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; break; @@ -1574,7 +1575,7 @@ static int omap_gpio_resume(struct sys_device *dev) { int i; - if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) return 0; for (i = 0; i < gpio_bank_count; i++) { -- cgit v1.2.3 From 40599072dca3ec7d4c9ff8271978be169f974638 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 25 Nov 2008 12:05:08 +0100 Subject: ACPI: scheduling in atomic via acpi_evaluate_integer () Now I know why I had strange "scheduling in atomic" problems: acpi_evaluate_integer() does malloc(..., irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL)... which is (of course) broken. There's no way to reliably tell if we need GFP_ATOMIC or not from code, this one for example fails to detect spinlocks held. Fortunately, allocation seems small enough to be done on stack. Signed-off-by: Pavel Machek Acked-by: Bob Moore Signed-off-by: Len Brown --- drivers/acpi/utils.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index e827be36ee8d..f844941089bb 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -259,34 +259,26 @@ acpi_evaluate_integer(acpi_handle handle, struct acpi_object_list *arguments, unsigned long long *data) { acpi_status status = AE_OK; - union acpi_object *element; + union acpi_object element; struct acpi_buffer buffer = { 0, NULL }; - if (!data) return AE_BAD_PARAMETER; - element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL); - if (!element) - return AE_NO_MEMORY; - buffer.length = sizeof(union acpi_object); - buffer.pointer = element; + buffer.pointer = &element; status = acpi_evaluate_object(handle, pathname, arguments, &buffer); if (ACPI_FAILURE(status)) { acpi_util_eval_error(handle, pathname, status); - kfree(element); return status; } - if (element->type != ACPI_TYPE_INTEGER) { + if (element.type != ACPI_TYPE_INTEGER) { acpi_util_eval_error(handle, pathname, AE_BAD_DATA); - kfree(element); return AE_BAD_DATA; } - *data = element->integer.value; - kfree(element); + *data = element.integer.value; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data)); -- cgit v1.2.3 From 65df78473ffbf3bff5e2034df1638acc4f3ddd50 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 26 Nov 2008 17:53:13 -0500 Subject: ACPI suspend: Blacklist boxes that require us to set SCI_EN directly on resume Some Apple boxes evidently require us to set SCI_EN on resume directly, because if we don't do that, they hung somewhere in the resume code path. Moreover, on these boxes it is not sufficient to use acpi_enable() to turn ACPI on during resume. All of this is against the ACPI specification which states that (1) the BIOS is supposed to return from the S3 sleep state with ACPI enabled (SCI_EN set) and (2) the SCI_EN bit is owned by the hardware and we are not supposed to change it. For this reason, blacklist the affected systems so that the SCI_EN bit is set during resume on them. [NOTE: Unconditional setting SCI_EN for all system on resume doesn't work, because it makes some other systems crash (that's to be expected). Also, it is not entirely clear right now if all of the Apple boxes require this workaround.] This patch fixes the recent regression tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12038 Signed-off-by: Rafael J. Wysocki Tested-by: Tino Keitel Tested-by: Bob Copeland Signed-off-by: Len Brown --- drivers/acpi/sleep/main.c | 40 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 80c0868d0480..28a691cc625e 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -90,6 +90,18 @@ void __init acpi_old_suspend_ordering(void) old_suspend_ordering = true; } +/* + * According to the ACPI specification the BIOS should make sure that ACPI is + * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, + * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI + * on such systems during resume. Unfortunately that doesn't help in + * particularly pathological cases in which SCI_EN has to be set directly on + * resume, although the specification states very clearly that this flag is + * owned by the hardware. The set_sci_en_on_resume variable will be set in such + * cases. + */ +static bool set_sci_en_on_resume; + /** * acpi_pm_disable_gpes - Disable the GPEs. */ @@ -235,7 +247,11 @@ static int acpi_suspend_enter(suspend_state_t pm_state) } /* If ACPI is not enabled by the BIOS, we need to enable it here. */ - acpi_enable(); + if (set_sci_en_on_resume) + acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1); + else + acpi_enable(); + /* Reprogram control registers and execute _BFS */ acpi_leave_sleep_state_prep(acpi_state); @@ -323,6 +339,12 @@ static int __init init_old_suspend_ordering(const struct dmi_system_id *d) return 0; } +static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d) +{ + set_sci_en_on_resume = true; + return 0; +} + static struct dmi_system_id __initdata acpisleep_dmi_table[] = { { .callback = init_old_suspend_ordering, @@ -340,6 +362,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), }, }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Apple MacBook 1,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Apple MacMini 1,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), + }, + }, {}, }; #endif /* CONFIG_SUSPEND */ -- cgit v1.2.3 From 3bdca1b863c1ebcb2244fc0cb683876d7330e62b Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 26 Nov 2008 17:55:15 -0500 Subject: Revert "ACPI: don't enable control method power button as wakeup device when Fixed Power button is used" This reverts commit faee816b1502385dc9bc5abf2960d1cc645844d1. http://bugzilla.kernel.org/show_bug.cgi?id=12091 Signed-off-by: Len Brown --- drivers/acpi/scan.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index bd5253ee5c85..39b7233c3485 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -751,16 +751,6 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) if (!acpi_match_device_ids(device, button_device_ids)) device->wakeup.flags.run_wake = 1; - /* - * Don't set Power button GPE as run_wake - * if Fixed Power button is used - */ - if (!strcmp(device->pnp.hardware_id, "PNP0C0C") && - !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) { - device->wakeup.flags.run_wake = 0; - device->wakeup.flags.valid = 0; - } - end: if (ACPI_FAILURE(status)) device->flags.wake_capable = 0; -- cgit v1.2.3 From 38cfc148e1bc470175b3ad131db7dd7bdcff37ee Mon Sep 17 00:00:00 2001 From: Alessandro Guido Date: Wed, 12 Nov 2008 23:03:28 +0100 Subject: sony-laptop: brightness regression fix After commit 540b8bb9c33935183ceb5bed466a42ad72b2af56: sony-laptop: fingers off backlight if video.ko is serving this functionality I can't set brightness on my sony laptop (nothing in /sys/class/backlight). dmesg says "sony-laptop: Sony: Brightness ignored, must be controlled by ACPI video driver". The function acpi_video_backlight_support returns 0 if we should use the vendor-specific backlight support, while non-0 if the ACPI generic should be used. Because of this, the check introduced by the said commit appears reversed. Signed-off-by: Alessandro Guido Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 7bcb81002dcf..2a613d4f3bd6 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1038,7 +1038,7 @@ static int sony_nc_add(struct acpi_device *device) goto outinput; } - if (!acpi_video_backlight_support()) { + if (acpi_video_backlight_support()) { printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be " "controlled by ACPI video driver\n"); } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", -- cgit v1.2.3 From 3fedd90fdf17643df1da473c5da983137d51bbdb Mon Sep 17 00:00:00 2001 From: Alessandro Guido Date: Wed, 12 Nov 2008 23:13:35 +0100 Subject: sony-laptop: printk tweak There's no need to print "Sony: " just after "sony-laptop: " (DRV_PFX). Signed-off-by: Alessandro Guido Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 2a613d4f3bd6..571b211608d1 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1039,7 +1039,7 @@ static int sony_nc_add(struct acpi_device *device) } if (acpi_video_backlight_support()) { - printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be " + printk(KERN_INFO DRV_PFX "brightness ignored, must be " "controlled by ACPI video driver\n"); } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) { -- cgit v1.2.3 From 7e5ab54296a41f590c9cbc976e1c86272f3a7e00 Mon Sep 17 00:00:00 2001 From: Rémi Denis-Courmont Date: Wed, 26 Nov 2008 15:26:43 -0800 Subject: Phonet: fix oops in phonet_address_del() on non-Phonet device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A NULL dereference would occur when trying to delete an addres from a network device that does not have any Phonet address. Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- net/phonet/pn_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c index 53be9fc82aaa..f93ff8ef47d0 100644 --- a/net/phonet/pn_dev.c +++ b/net/phonet/pn_dev.c @@ -115,7 +115,7 @@ int phonet_address_del(struct net_device *dev, u8 addr) pnd = __phonet_get(dev); if (!pnd || !test_and_clear_bit(addr >> 2, pnd->addrs)) err = -EADDRNOTAVAIL; - if (bitmap_empty(pnd->addrs, 64)) + else if (bitmap_empty(pnd->addrs, 64)) __phonet_device_free(pnd); spin_unlock_bh(&pndevs.lock); return err; -- cgit v1.2.3 From efbbced361f3ff4ff9e85310ccff894185c4d904 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 26 Nov 2008 15:30:48 -0800 Subject: macvlan: don't broadcast PAUSE frames to macvlan devices PAUSE frames are only relevant for the real device, broadcasting them to all macvlan devices can cause a significant load increase. Reported-by: Ben Greear Tested-by: Ben Greear Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 42394505bb50..590039cbb146 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -70,6 +70,9 @@ static void macvlan_broadcast(struct sk_buff *skb, struct sk_buff *nskb; unsigned int i; + if (skb->protocol == htons(ETH_P_PAUSE)) + return; + for (i = 0; i < MACVLAN_HASH_SIZE; i++) { hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) { dev = vlan->dev; -- cgit v1.2.3 From 5f23b734963ec7eaa3ebcd9050da0c9b7d143dd3 Mon Sep 17 00:00:00 2001 From: dann frazier Date: Wed, 26 Nov 2008 15:32:27 -0800 Subject: net: Fix soft lockups/OOM issues w/ unix garbage collector This is an implementation of David Miller's suggested fix in: https://bugzilla.redhat.com/show_bug.cgi?id=470201 It has been updated to use wait_event() instead of wait_event_interruptible(). Paraphrasing the description from the above report, it makes sendmsg() block while UNIX garbage collection is in progress. This avoids a situation where child processes continue to queue new FDs over a AF_UNIX socket to a parent which is in the exit path and running garbage collection on these FDs. This contention can result in soft lockups and oom-killing of unrelated processes. Signed-off-by: dann frazier Signed-off-by: David S. Miller --- include/net/af_unix.h | 1 + net/unix/af_unix.c | 2 ++ net/unix/garbage.c | 13 ++++++++++--- 3 files changed, 13 insertions(+), 3 deletions(-) diff --git a/include/net/af_unix.h b/include/net/af_unix.h index c29ff1da8a18..1614d78c60ed 100644 --- a/include/net/af_unix.h +++ b/include/net/af_unix.h @@ -9,6 +9,7 @@ extern void unix_inflight(struct file *fp); extern void unix_notinflight(struct file *fp); extern void unix_gc(void); +extern void wait_for_unix_gc(void); #define UNIX_HASH_SIZE 256 diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index eb90f77bb0e2..66d5ac4773ab 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1343,6 +1343,7 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock, if (NULL == siocb->scm) siocb->scm = &tmp_scm; + wait_for_unix_gc(); err = scm_send(sock, msg, siocb->scm); if (err < 0) return err; @@ -1493,6 +1494,7 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock, if (NULL == siocb->scm) siocb->scm = &tmp_scm; + wait_for_unix_gc(); err = scm_send(sock, msg, siocb->scm); if (err < 0) return err; diff --git a/net/unix/garbage.c b/net/unix/garbage.c index 6d4a9a8de5ef..abb3ab34cb1e 100644 --- a/net/unix/garbage.c +++ b/net/unix/garbage.c @@ -80,6 +80,7 @@ #include #include #include +#include #include #include @@ -91,6 +92,7 @@ static LIST_HEAD(gc_inflight_list); static LIST_HEAD(gc_candidates); static DEFINE_SPINLOCK(unix_gc_lock); +static DECLARE_WAIT_QUEUE_HEAD(unix_gc_wait); unsigned int unix_tot_inflight; @@ -266,12 +268,16 @@ static void inc_inflight_move_tail(struct unix_sock *u) list_move_tail(&u->link, &gc_candidates); } -/* The external entry point: unix_gc() */ +static bool gc_in_progress = false; -void unix_gc(void) +void wait_for_unix_gc(void) { - static bool gc_in_progress = false; + wait_event(unix_gc_wait, gc_in_progress == false); +} +/* The external entry point: unix_gc() */ +void unix_gc(void) +{ struct unix_sock *u; struct unix_sock *next; struct sk_buff_head hitlist; @@ -376,6 +382,7 @@ void unix_gc(void) /* All candidates should have been detached by now. */ BUG_ON(!list_empty(&gc_candidates)); gc_in_progress = false; + wake_up(&unix_gc_wait); out: spin_unlock(&unix_gc_lock); -- cgit v1.2.3 From 0081b162023690877e0096ef17a82ba1969befa8 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sun, 9 Nov 2008 10:54:02 -0200 Subject: ACPI: thinkpad-acpi: fix fan sleep/resume path This fixes a regression from v2.6.27, caused by commit 5814f737e1cd2cfa2893badd62189acae3e1e1fd, "ACPI: thinkpad-acpi: attempt to preserve fan state on resume". It is possible for fan_suspend() to fail to properly initialize fan_control_desired_level as required by fan_resume(), resulting on the fan always being set to level 7 on resume if the user didn't touch the fan controller. In order to get fan sleep/resume handling to work right: 1. Fix the fan_suspend handling of the T43 firmware quirk. If it is still undefined, we didn't touch the fan yet and that means we have no business doing it on resume. 2. Store the fan level on its own variable to avoid any possible issues with hijacking fan_control_desired_level (which isn't supposed to have anything other than 0-7 in it, anyway). 3. Change the fan_resume code to me more straightforward to understand (although we DO optimize the boolean logic there, otherwise it looks disgusting). 4. Add comments to help understand what the code is supposed to be doing. 5. Change fan_set_level to be less strict about how auto and full-speed modes are requested. http://bugzilla.kernel.org/show_bug.cgi?id=11982 Signed-off-by: Henrique de Moraes Holschuh Reported-by: Tino Keitel Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 57 ++++++++++++++++++++++++++++++++++---------- 1 file changed, 45 insertions(+), 12 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 7a4a26b0edd2..899766e16fa8 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -5318,6 +5318,7 @@ static enum fan_control_commands fan_control_commands; static u8 fan_control_initial_status; static u8 fan_control_desired_level; +static u8 fan_control_resume_level; static int fan_watchdog_maxinterval; static struct mutex fan_mutex; @@ -5440,8 +5441,8 @@ static int fan_set_level(int level) case TPACPI_FAN_WR_ACPI_FANS: case TPACPI_FAN_WR_TPEC: - if ((level != TP_EC_FAN_AUTO) && - (level != TP_EC_FAN_FULLSPEED) && + if (!(level & TP_EC_FAN_AUTO) && + !(level & TP_EC_FAN_FULLSPEED) && ((level < 0) || (level > 7))) return -EINVAL; @@ -6005,38 +6006,67 @@ static void fan_exit(void) static void fan_suspend(pm_message_t state) { + int rc; + if (!fan_control_allowed) return; /* Store fan status in cache */ - fan_get_status_safe(NULL); + fan_control_resume_level = 0; + rc = fan_get_status_safe(&fan_control_resume_level); + if (rc < 0) + printk(TPACPI_NOTICE + "failed to read fan level for later " + "restore during resume: %d\n", rc); + + /* if it is undefined, don't attempt to restore it. + * KEEP THIS LAST */ if (tp_features.fan_ctrl_status_undef) - fan_control_desired_level = TP_EC_FAN_AUTO; + fan_control_resume_level = 0; } static void fan_resume(void) { - u8 saved_fan_level; u8 current_level = 7; bool do_set = false; + int rc; /* DSDT *always* updates status on resume */ tp_features.fan_ctrl_status_undef = 0; - saved_fan_level = fan_control_desired_level; if (!fan_control_allowed || + !fan_control_resume_level || (fan_get_status_safe(¤t_level) < 0)) return; switch (fan_control_access_mode) { case TPACPI_FAN_WR_ACPI_SFAN: - do_set = (saved_fan_level > current_level); + /* never decrease fan level */ + do_set = (fan_control_resume_level > current_level); break; case TPACPI_FAN_WR_ACPI_FANS: case TPACPI_FAN_WR_TPEC: - do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) || - (saved_fan_level == 7 && - !(current_level & TP_EC_FAN_FULLSPEED))); + /* never decrease fan level, scale is: + * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO + * + * We expect the firmware to set either 7 or AUTO, but we + * handle FULLSPEED out of paranoia. + * + * So, we can safely only restore FULLSPEED or 7, anything + * else could slow the fan. Restoring AUTO is useless, at + * best that's exactly what the DSDT already set (it is the + * slower it uses). + * + * Always keep in mind that the DSDT *will* have set the + * fans to what the vendor supposes is the best level. We + * muck with it only to speed the fan up. + */ + if (fan_control_resume_level != 7 && + !(fan_control_resume_level & TP_EC_FAN_FULLSPEED)) + return; + else + do_set = !(current_level & TP_EC_FAN_FULLSPEED) && + (current_level != fan_control_resume_level); break; default: return; @@ -6044,8 +6074,11 @@ static void fan_resume(void) if (do_set) { printk(TPACPI_NOTICE "restoring fan level to 0x%02x\n", - saved_fan_level); - fan_set_level_safe(saved_fan_level); + fan_control_resume_level); + rc = fan_set_level_safe(fan_control_resume_level); + if (rc < 0) + printk(TPACPI_NOTICE + "failed to restore fan level: %d\n", rc); } } -- cgit v1.2.3 From 95a28ed08619cc70f31611886ac7b26ab0e462dc Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 13 Nov 2008 11:01:34 +0800 Subject: ACPICA: Allow _WAK method to return an Integer This can happen if the _WAK method returns nothing (as per ACPI 1.0) but does return an integer if the implicit return mechanism is enabled. This is the only method that has this problem, since it is also defined to return a package of two integers (ACPI 1.0b+). In all other cases, if a method returns an object when one was not expected, no warning is issued. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- include/acpi/acpredef.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/acpredef.h b/include/acpi/acpredef.h index 619fb75f8861..e6452dbf39e3 100644 --- a/include/acpi/acpredef.h +++ b/include/acpi/acpredef.h @@ -346,7 +346,7 @@ static const union acpi_predefined_info predefined_names[] = { /* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */ - {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_PACKAGE}}, + {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* fixed (2 Int), but is optional */ {.ret_info = {0, 0, 0, 0, 0, 0}} /* Table terminator */ }; -- cgit v1.2.3 From a6e0887f21bbab337ee32d9c0a84d7c0b6e9141b Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 8 Nov 2008 01:21:10 -0500 Subject: ACPI: delete OSI(Linux) DMI dmesg spam Linux will continue to ignore OSI(Linux), except for a white-list containing a few systems. So delete the black-list, and stop soliciting user-feedback on the console. Signed-off-by: Len Brown --- drivers/acpi/blacklist.c | 401 +---------------------------------------------- drivers/acpi/osl.c | 104 +++--------- 2 files changed, 30 insertions(+), 475 deletions(-) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index ea92bac42c53..09c69806c1fc 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -176,16 +176,6 @@ static int __init dmi_enable_osi_linux(const struct dmi_system_id *d) acpi_dmi_osi_linux(1, d); /* enable */ return 0; } -static int __init dmi_disable_osi_linux(const struct dmi_system_id *d) -{ - acpi_dmi_osi_linux(0, d); /* disable */ - return 0; -} -static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d) -{ - acpi_dmi_osi_linux(-1, d); /* unknown */ - return 0; -} static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) { printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); @@ -193,295 +183,21 @@ static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) return 0; } -/* - * Most BIOS that invoke OSI(Linux) do nothing with it. - * But some cause Linux to break. - * Only a couple use it to make Linux run better. - * - * Thus, Linux should continue to disable OSI(Linux) by default, - * should continue to discourage BIOS writers from using it, and - * should whitelist the few existing systems that require it. - * - * If it appears clear a vendor isn't using OSI(Linux) - * for anything constructive, blacklist them by name to disable - * unnecessary dmesg warnings on all of their products. - */ - static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { - /* - * Disable OSI(Linux) warnings on all "Acer, inc." - * - * _OSI(Linux) disables the latest Windows BIOS code: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"), - * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"), - */ - /* - * note that dmi_check_system() uses strstr() - * to match sub-strings rather than !strcmp(), - * so "Acer" below matches "Acer, inc." above. - */ - /* - * Disable OSI(Linux) warnings on all "Acer" - * - * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"), - * - * _OSI(Linux) is a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Acer", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Apple Computer, Inc." - * Disable OSI(Linux) warnings on all "Apple Inc." - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"), - * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Apple", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "BenQ" - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "BenQ", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "BenQ"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Clevo Co." - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Clevo", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."), - }, - }, - /* - * Disable OSI(Linux) warnings on all "COMPAL" - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_BOARD_NAME, "IFL91"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Compal", - .matches = { - DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), - }, - }, - { /* OSI(Linux) touches USB, unknown side-effect */ - .callback = dmi_disable_osi_linux, - .ident = "Dell Dimension 5150", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_disable_osi_linux, - .ident = "Dell i1501", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell Latitude D830", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell OptiPlex GX620", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"), - }, - }, - { /* OSI(Linux) causes some USB initialization to not run */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell OptiPlex 755", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PE 1900", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PE 1950", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_disable_osi_linux, - .ident = "Dell PE R200", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"), - }, - }, - { /* OSI(Linux) touches USB */ - .callback = dmi_disable_osi_linux, - .ident = "Dell PR 390", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"), - }, - }, - { /* OSI(Linux) touches USB */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PR 390", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"), - }, - }, - { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PR M4300", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_disable_osi_linux, - .ident = "Dell Vostro 1000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PE SC440", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dialogue Flybook V5", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS" - * - * _OSI(Linux) disables latest Windows BIOS code: - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"), - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"), - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"), - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"), - * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Fujitsu Siemens", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - }, - }, { .callback = dmi_disable_osi_vista, .ident = "Fujitsu Siemens", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), + DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), }, }, + /* - * Disable OSI(Linux) warnings on all "Hewlett-Packard" - * - * _OSI(Linux) confirmed to be a NOP: - * .ident = "HP Pavilion tx 1000" - * DMI_MATCH(DMI_BOARD_NAME, "30BF"), - * .ident = "HP Pavilion dv2000" - * DMI_MATCH(DMI_BOARD_NAME, "30B5"), - * .ident = "HP Pavilion dv5000", - * DMI_MATCH(DMI_BOARD_NAME, "30A7"), - * .ident = "HP Pavilion dv6300 30BC", - * DMI_MATCH(DMI_BOARD_NAME, "30BC"), - * .ident = "HP Pavilion dv6000", - * DMI_MATCH(DMI_BOARD_NAME, "30B7"), - * DMI_MATCH(DMI_BOARD_NAME, "30B8"), - * .ident = "HP Pavilion dv9000", - * DMI_MATCH(DMI_BOARD_NAME, "30B9"), - * .ident = "HP Pavilion dv9500", - * DMI_MATCH(DMI_BOARD_NAME, "30CB"), - * .ident = "HP/Compaq Presario C500", - * DMI_MATCH(DMI_BOARD_NAME, "30C6"), - * .ident = "HP/Compaq Presario F500", - * DMI_MATCH(DMI_BOARD_NAME, "30D3"), - * _OSI(Linux) unknown effect: - * .ident = "HP Pavilion dv6500", - * DMI_MATCH(DMI_BOARD_NAME, "30D0"), + * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. + * Linux ignores it, except for the machines enumerated below. */ - { - .callback = dmi_disable_osi_linux, - .ident = "Hewlett-Packard", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - }, - }, + /* * Lenovo has a mix of systems OSI(Linux) situations * and thus we can not wildcard the vendor. @@ -519,113 +235,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"), }, }, - { - .callback = dmi_disable_osi_linux, - .ident = "Lenovo 3000 V100", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"), - }, - }, - { - .callback = dmi_disable_osi_linux, - .ident = "Lenovo 3000 N100", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "LG Electronics" - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"), - * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"), - * - * unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"), - * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "LG", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), - }, - }, - /* NEC - OSI(Linux) effect unknown */ - { - .callback = dmi_unknown_osi_linux, - .ident = "NEC VERSA M360", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"), - DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"), - }, - }, - /* Panasonic */ - { - .callback = dmi_unknown_osi_linux, - .ident = "Panasonic", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"), - /* Toughbook CF-52 */ - DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Samsung Electronics" - * - * OSI(Linux) disables PNP0C32 and other BIOS code for Windows: - * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"), - * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Samsung", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Sony Corporation" - * - * _OSI(Linux) is a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"), - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"), - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"), - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Sony", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "TOSHIBA" - * - * _OSI(Linux) breaks sound (bugzilla 7787): - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"), - * _OSI(Linux) is a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Toshiba", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - }, - }, {} }; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 4be252145cb4..c8111424dcb8 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include @@ -97,54 +96,44 @@ static DEFINE_SPINLOCK(acpi_res_lock); static char osi_additional_string[OSI_STRING_LENGTH_MAX]; /* - * "Ode to _OSI(Linux)" + * The story of _OSI(Linux) * - * osi_linux -- Control response to BIOS _OSI(Linux) query. + * From pre-history through Linux-2.6.22, + * Linux responded TRUE upon a BIOS OSI(Linux) query. * - * As Linux evolves, the features that it supports change. - * So an OSI string such as "Linux" is not specific enough - * to be useful across multiple versions of Linux. It - * doesn't identify any particular feature, interface, - * or even any particular version of Linux... + * Unfortunately, reference BIOS writers got wind of this + * and put OSI(Linux) in their example code, quickly exposing + * this string as ill-conceived and opening the door to + * an un-bounded number of BIOS incompatibilities. * - * Unfortunately, Linux-2.6.22 and earlier responded "yes" - * to a BIOS _OSI(Linux) query. When - * a reference mobile BIOS started using it, its use - * started to spread to many vendor platforms. - * As it is not supportable, we need to halt that spread. + * For example, OSI(Linux) was used on resume to re-POST a + * video card on one system, because Linux at that time + * could not do a speedy restore in its native driver. + * But then upon gaining quick native restore capability, + * Linux has no way to tell the BIOS to skip the time-consuming + * POST -- putting Linux at a permanent performance disadvantage. + * On another system, the BIOS writer used OSI(Linux) + * to infer native OS support for IPMI! On other systems, + * OSI(Linux) simply got in the way of Linux claiming to + * be compatible with other operating systems, exposing + * BIOS issues such as skipped device initialization. * - * Today, most BIOS references to _OSI(Linux) are noise -- - * they have no functional effect and are just dead code - * carried over from the reference BIOS. - * - * The next most common case is that _OSI(Linux) harms Linux, - * usually by causing the BIOS to follow paths that are - * not tested during Windows validation. - * - * Finally, there is a short list of platforms - * where OSI(Linux) benefits Linux. - * - * In Linux-2.6.23, OSI(Linux) is first disabled by default. - * DMI is used to disable the dmesg warning about OSI(Linux) - * on platforms where it is known to have no effect. - * But a dmesg warning remains for systems where - * we do not know if OSI(Linux) is good or bad for the system. - * DMI is also used to enable OSI(Linux) for the machines - * that are known to need it. + * So "Linux" turned out to be a really poor chose of + * OSI string, and from Linux-2.6.23 onward we respond FALSE. * * BIOS writers should NOT query _OSI(Linux) on future systems. - * It will be ignored by default, and to get Linux to - * not ignore it will require a kernel source update to - * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation. + * Linux will complain on the console when it sees it, and return FALSE. + * To get Linux to return TRUE for your system will require + * a kernel source update to add a DMI entry, + * or boot with "acpi_osi=Linux" */ -#define OSI_LINUX_ENABLE 0 static struct osi_linux { unsigned int enable:1; unsigned int dmi:1; unsigned int cmdline:1; unsigned int known:1; -} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0}; +} osi_linux = { 0, 0, 0, 0}; static void __init acpi_request_region (struct acpi_generic_address *addr, unsigned int length, char *desc) @@ -1296,34 +1285,6 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object) return (AE_OK); } -/** - * acpi_dmi_dump - dump DMI slots needed for blacklist entry - * - * Returns 0 on success - */ -static int acpi_dmi_dump(void) -{ - - if (!dmi_available) - return -1; - - printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n", - dmi_get_system_info(DMI_SYS_VENDOR)); - printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n", - dmi_get_system_info(DMI_PRODUCT_NAME)); - printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n", - dmi_get_system_info(DMI_PRODUCT_VERSION)); - printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n", - dmi_get_system_info(DMI_BOARD_NAME)); - printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n", - dmi_get_system_info(DMI_BIOS_VENDOR)); - printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n", - dmi_get_system_info(DMI_BIOS_DATE)); - - return 0; -} - - /****************************************************************************** * * FUNCTION: acpi_os_validate_interface @@ -1350,21 +1311,6 @@ acpi_os_validate_interface (char *interface) osi_linux.cmdline ? " via cmdline" : osi_linux.dmi ? " via DMI" : ""); - if (!osi_linux.dmi) { - if (acpi_dmi_dump()) - printk(KERN_NOTICE PREFIX - "[please extract dmidecode output]\n"); - printk(KERN_NOTICE PREFIX - "Please send DMI info above to " - "linux-acpi@vger.kernel.org\n"); - } - if (!osi_linux.known && !osi_linux.cmdline) { - printk(KERN_NOTICE PREFIX - "If \"acpi_osi=%sLinux\" works better, " - "please notify linux-acpi@vger.kernel.org\n", - osi_linux.enable ? "!" : ""); - } - if (osi_linux.enable) return AE_OK; } -- cgit v1.2.3 From e899b6485c332aa2d7510739507ab5e5d7b28e59 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 27 Nov 2008 14:42:30 +0800 Subject: ACPICA: disable _BIF warning A generic work-around from ACPICA is in the queue, but since Linux has a work-around in its battery driver, we can disable this warning now. Allow _BIF method to return an Package with Buffer elements http://bugzilla.kernel.org/show_bug.cgi?id=11822 Signed-off-by: Lin Ming Signed-off-by: Len Brown --- include/acpi/acpredef.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/acpredef.h b/include/acpi/acpredef.h index e6452dbf39e3..16a9ca9a66e4 100644 --- a/include/acpi/acpredef.h +++ b/include/acpi/acpredef.h @@ -167,7 +167,7 @@ static const union acpi_predefined_info predefined_names[] = { {.info = {"_BFS", 1, 0}}, {.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 9, - ACPI_RTYPE_STRING, 4, 0}}, /* fixed (9 Int),(4 Str) */ + ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER, 4, 0}}, /* fixed (9 Int),(4 Str) */ {.info = {"_BLT", 3, 0}}, {.info = {"_BMC", 1, 0}}, {.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* fixed (5 Int) */ -- cgit v1.2.3 From 4f5a7f40ddbae98569acbb99118a98570315579c Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 27 Nov 2008 10:21:46 +0800 Subject: ftrace: prevent recursion Impact: prevent unnecessary stack recursion if the resched flag was set before we entered, then don't reschedule. Signed-off-by: Lai Jiangshan Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index f780e9552f91..668bbb5ef2bd 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1215,7 +1215,7 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, out: if (resched) - preempt_enable_notrace(); + preempt_enable_no_resched_notrace(); else preempt_enable_notrace(); return NULL; -- cgit v1.2.3 From 4cd4262034849da01eb88659af677b69f8169f06 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 26 Nov 2008 21:04:24 -0500 Subject: sched: prevent divide by zero error in cpu_avg_load_per_task Impact: fix divide by zero crash in scheduler rebalance irq While testing the branch profiler, I hit this crash: divide error: 0000 [#1] PREEMPT SMP [...] RIP: 0010:[] [] cpu_avg_load_per_task+0x50/0x7f [...] Call Trace: <0> [] find_busiest_group+0x3e5/0xcaa [] rebalance_domains+0x2da/0xa21 [] ? find_next_bit+0x1b2/0x1e6 [] run_rebalance_domains+0x112/0x19f [] __do_softirq+0xa8/0x232 [] call_softirq+0x1c/0x3e [] do_softirq+0x94/0x1cd [] irq_exit+0x6b/0x10e [] smp_apic_timer_interrupt+0xd3/0xff [] apic_timer_interrupt+0x13/0x20 The code for cpu_avg_load_per_task has: if (rq->nr_running) rq->avg_load_per_task = rq->load.weight / rq->nr_running; The runqueue lock is not held here, and there is nothing that prevents the rq->nr_running from going to zero after it passes the if condition. The branch profiler simply made the race window bigger. This patch saves off the rq->nr_running to a local variable and uses that for both the condition and the division. Signed-off-by: Steven Rostedt Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 9b1e79371c20..700aa9a1413f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1453,9 +1453,10 @@ static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd); static unsigned long cpu_avg_load_per_task(int cpu) { struct rq *rq = cpu_rq(cpu); + unsigned long nr_running = rq->nr_running; - if (rq->nr_running) - rq->avg_load_per_task = rq->load.weight / rq->nr_running; + if (nr_running) + rq->avg_load_per_task = rq->load.weight / nr_running; else rq->avg_load_per_task = 0; -- cgit v1.2.3 From 29b65861fbece04cfdf3fee352d5247369131850 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Thu, 27 Nov 2008 09:46:13 +0000 Subject: [MTD] [NAND] fsl_upm: fix build problem with 2.6.28-rc2 The patch fixes following build error: CC drivers/mtd/nand/fsl_upm.o drivers/mtd/nand/fsl_upm.c: In function 'fun_chip_init': drivers/mtd/nand/fsl_upm.c:168: warning: passing argument 2 of 'of_mtd_parse_partitions' from incompatible pointer type drivers/mtd/nand/fsl_upm.c:168: warning: passing argument 3 of 'of_mtd_parse_partitions' from incompatible pointer type drivers/mtd/nand/fsl_upm.c:168: error: too many arguments to function 'of_mtd_parse_partitions' make[1]: *** [drivers/mtd/nand/fsl_upm.o] Error 1 The breakage was introduced in 69fd3a8d098faf41a04930afa83757c0555ee360 ("[MTD] remove unused mtd parameter in of_mtd_parse_partitions()"). While at it, also add a check for the of_mtd_parse_partitions() return value. Signed-off-by: Wolfgang Grandegger Signed-off-by: Anton Vorontsov Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsl_upm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 024e3fffd4bb..a83192f80eba 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -163,9 +163,11 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun, ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0); #ifdef CONFIG_MTD_OF_PARTS - if (ret == 0) - ret = of_mtd_parse_partitions(fun->dev, &fun->mtd, - flash_np, &fun->parts); + if (ret == 0) { + ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts); + if (ret < 0) + goto err; + } #endif if (ret > 0) ret = add_mtd_partitions(&fun->mtd, fun->parts, ret); -- cgit v1.2.3 From 59da21398e680e8100625d689c8bebee6a139e93 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 27 Nov 2008 11:05:55 +0100 Subject: [S390] fix system call parameter functions. syscall_get_nr() currently returns a valid result only if the call chain of the traced process includes do_syscall_trace_enter(). But collect_syscall() can be called for any sleeping task, the result of syscall_get_nr() in general is completely bogus. To make syscall_get_nr() work for any sleeping task the traps field in pt_regs is replace with svcnr - the system call number the process is executing. If svcnr == 0 the process is not on a system call path. The syscall_get_arguments and syscall_set_arguments use regs->gprs[2] for the first system call parameter. This is incorrect since gprs[2] may have been overwritten with the system call number if the call chain includes do_syscall_trace_enter. Use regs->orig_gprs2 instead. Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/ptrace.h | 2 +- arch/s390/include/asm/syscall.h | 28 ++++++++++++++++------------ arch/s390/kernel/asm-offsets.c | 2 +- arch/s390/kernel/compat_signal.c | 2 +- arch/s390/kernel/entry.S | 21 +++++++++++---------- arch/s390/kernel/entry64.S | 23 ++++++++++------------- arch/s390/kernel/ptrace.c | 2 +- arch/s390/kernel/signal.c | 6 +++--- 8 files changed, 44 insertions(+), 42 deletions(-) diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index a7226f8143fb..fb0ca4796d3b 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -321,8 +321,8 @@ struct pt_regs psw_t psw; unsigned long gprs[NUM_GPRS]; unsigned long orig_gpr2; + unsigned short svcnr; unsigned short ilc; - unsigned short trap; }; #endif diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h index 6e623971fbb9..2429b87eb28d 100644 --- a/arch/s390/include/asm/syscall.h +++ b/arch/s390/include/asm/syscall.h @@ -17,9 +17,7 @@ static inline long syscall_get_nr(struct task_struct *task, struct pt_regs *regs) { - if (regs->trap != __LC_SVC_OLD_PSW) - return -1; - return regs->gprs[2]; + return regs->svcnr ? regs->svcnr : -1; } static inline void syscall_rollback(struct task_struct *task, @@ -52,18 +50,20 @@ static inline void syscall_get_arguments(struct task_struct *task, unsigned int i, unsigned int n, unsigned long *args) { + unsigned long mask = -1UL; + BUG_ON(i + n > 6); #ifdef CONFIG_COMPAT - if (test_tsk_thread_flag(task, TIF_31BIT)) { - if (i + n == 6) - args[--n] = (u32) regs->args[0]; - while (n-- > 0) - args[n] = (u32) regs->gprs[2 + i + n]; - } + if (test_tsk_thread_flag(task, TIF_31BIT)) + mask = 0xffffffff; #endif if (i + n == 6) - args[--n] = regs->args[0]; - memcpy(args, ®s->gprs[2 + i], n * sizeof(args[0])); + args[--n] = regs->args[0] & mask; + while (n-- > 0) + if (i + n > 0) + args[n] = regs->gprs[2 + i + n] & mask; + if (i == 0) + args[0] = regs->orig_gpr2 & mask; } static inline void syscall_set_arguments(struct task_struct *task, @@ -74,7 +74,11 @@ static inline void syscall_set_arguments(struct task_struct *task, BUG_ON(i + n > 6); if (i + n == 6) regs->args[0] = args[--n]; - memcpy(®s->gprs[2 + i], args, n * sizeof(args[0])); + while (n-- > 0) + if (i + n > 0) + regs->gprs[2 + i + n] = args[n]; + if (i == 0) + regs->orig_gpr2 = args[0]; } #endif /* _ASM_SYSCALL_H */ diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index fa28ecae636b..3d144e6020c6 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -32,7 +32,7 @@ int main(void) DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs)); DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2)); DEFINE(__PT_ILC, offsetof(struct pt_regs, ilc)); - DEFINE(__PT_TRAP, offsetof(struct pt_regs, trap)); + DEFINE(__PT_SVCNR, offsetof(struct pt_regs, svcnr)); DEFINE(__PT_SIZE, sizeof(struct pt_regs)); BLANK(); DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain)); diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index c7f02e777af2..b537cb0e9b55 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -340,7 +340,7 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs) return err; restore_fp_regs(¤t->thread.fp_regs); - regs->trap = -1; /* disable syscall checks */ + regs->svcnr = 0; /* disable syscall checks */ return 0; } diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 08844fc24a2e..198ea18a534d 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -46,7 +46,7 @@ SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60 SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC -SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP +SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ @@ -183,11 +183,10 @@ STACK_SIZE = 1 << STACK_SHIFT .macro CREATE_STACK_FRAME psworg,savearea s %r15,BASED(.Lc_spsize) # make room for registers & psw mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack - la %r12,\psworg st %r2,SP_ORIG_R2(%r15) # store original content of gpr 2 - icm %r12,12,__LC_SVC_ILC + icm %r12,3,__LC_SVC_ILC stm %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack - st %r12,SP_ILC(%r15) + st %r12,SP_SVCNR(%r15) mvc SP_R12(16,%r15),\savearea # move %r12-%r15 to stack la %r12,0 st %r12,__SF_BACKCHAIN(%r15) # clear back chain @@ -264,16 +263,17 @@ sysc_update: #endif sysc_do_svc: l %r9,__LC_THREAD_INFO # load pointer to thread_info struct - sla %r7,2 # *4 and test for svc 0 + ltr %r7,%r7 # test for svc 0 bnz BASED(sysc_nr_ok) # svc number > 0 # svc 0: system call number in %r1 cl %r1,BASED(.Lnr_syscalls) bnl BASED(sysc_nr_ok) lr %r7,%r1 # copy svc number to %r7 - sla %r7,2 # *4 sysc_nr_ok: mvc SP_ARGS(4,%r15),SP_R7(%r15) sysc_do_restart: + sth %r7,SP_SVCNR(%r15) + sll %r7,2 # svc number *4 l %r8,BASED(.Lsysc_table) tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) l %r8,0(%r7,%r8) # get system call addr. @@ -376,7 +376,6 @@ sysc_notify_resume: sysc_restart: ni __TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC l %r7,SP_R2(%r15) # load new svc number - sla %r7,2 mvc SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument lm %r2,%r6,SP_R2(%r15) # load svc arguments b BASED(sysc_do_restart) # restart svc @@ -386,7 +385,8 @@ sysc_restart: # sysc_singlestep: ni __TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP - mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check + mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check + mvi SP_SVCNR+1(%r15),0xff la %r2,SP_PTREGS(%r15) # address of register-save area l %r1,BASED(.Lhandle_per) # load adr. of per handler la %r14,BASED(sysc_return) # load adr. of system return @@ -407,7 +407,7 @@ sysc_tracesys: bnl BASED(sysc_tracenogo) l %r8,BASED(.Lsysc_table) lr %r7,%r2 - sll %r7,2 # *4 + sll %r7,2 # svc number *4 l %r8,0(%r7,%r8) sysc_tracego: lm %r3,%r6,SP_R3(%r15) @@ -586,7 +586,8 @@ pgm_svcper: # per was called from kernel, must be kprobes # kernel_per: - mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check + mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check + mvi SP_SVCNR+1(%r15),0xff la %r2,SP_PTREGS(%r15) # address of register-save area l %r1,BASED(.Lhandle_per) # load adr. of per handler la %r14,BASED(sysc_restore)# load adr. of system return diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 41aca06682aa..89c121ae6339 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -46,7 +46,7 @@ SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 112 SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120 SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC -SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP +SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER @@ -171,11 +171,10 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ .macro CREATE_STACK_FRAME psworg,savearea aghi %r15,-SP_SIZE # make room for registers & psw mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack - la %r12,\psworg stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2 - icm %r12,12,__LC_SVC_ILC + icm %r12,3,__LC_SVC_ILC stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack - st %r12,SP_ILC(%r15) + st %r12,SP_SVCNR(%r15) mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack la %r12,0 stg %r12,__SF_BACKCHAIN(%r15) @@ -250,16 +249,17 @@ sysc_update: #endif sysc_do_svc: lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct - slag %r7,%r7,2 # *4 and test for svc 0 + ltgr %r7,%r7 # test for svc 0 jnz sysc_nr_ok # svc 0: system call number in %r1 cl %r1,BASED(.Lnr_syscalls) jnl sysc_nr_ok lgfr %r7,%r1 # clear high word in r1 - slag %r7,%r7,2 # svc 0: system call number in %r1 sysc_nr_ok: mvc SP_ARGS(8,%r15),SP_R7(%r15) sysc_do_restart: + sth %r7,SP_SVCNR(%r15) + sllg %r7,%r7,2 # svc number * 4 larl %r10,sys_call_table #ifdef CONFIG_COMPAT tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ? @@ -363,7 +363,6 @@ sysc_notify_resume: sysc_restart: ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC lg %r7,SP_R2(%r15) # load new svc number - slag %r7,%r7,2 # *4 mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument lmg %r2,%r6,SP_R2(%r15) # load svc arguments j sysc_do_restart # restart svc @@ -372,9 +371,8 @@ sysc_restart: # _TIF_SINGLE_STEP is set, call do_single_step # sysc_singlestep: - ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP - lhi %r0,__LC_PGM_OLD_PSW - sth %r0,SP_TRAP(%r15) # set trap indication to pgm check + ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP + xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number la %r2,SP_PTREGS(%r15) # address of register-save area larl %r14,sysc_return # load adr. of system return jg do_single_step # branch to do_sigtrap @@ -392,7 +390,7 @@ sysc_tracesys: lghi %r0,NR_syscalls clgr %r0,%r2 jnh sysc_tracenogo - slag %r7,%r2,2 # *4 + sllg %r7,%r2,2 # svc number *4 lgf %r8,0(%r7,%r10) sysc_tracego: lmg %r3,%r6,SP_R3(%r15) @@ -567,8 +565,7 @@ pgm_svcper: # per was called from kernel, must be kprobes # kernel_per: - lhi %r0,__LC_PGM_OLD_PSW - sth %r0,SP_TRAP(%r15) # set trap indication to pgm check + xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number la %r2,SP_PTREGS(%r15) # address of register-save area larl %r14,sysc_restore # load adr. of system ret, no work jg do_single_step # branch to do_single_step diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 1f31be1ecc4b..38ff2bce1203 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -657,7 +657,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) * debugger stored an invalid system call number. Skip * the system call and the system call restart handling. */ - regs->trap = -1; + regs->svcnr = 0; ret = -1; } diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 4f7fc3059a8e..8e6812a22670 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -160,7 +160,7 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs) current->thread.fp_regs.fpc &= FPC_VALID_MASK; restore_fp_regs(¤t->thread.fp_regs); - regs->trap = -1; /* disable syscall checks */ + regs->svcnr = 0; /* disable syscall checks */ return 0; } @@ -445,7 +445,7 @@ void do_signal(struct pt_regs *regs) oldset = ¤t->blocked; /* Are we from a system call? */ - if (regs->trap == __LC_SVC_OLD_PSW) { + if (regs->svcnr) { continue_addr = regs->psw.addr; restart_addr = continue_addr - regs->ilc; retval = regs->gprs[2]; @@ -462,7 +462,7 @@ void do_signal(struct pt_regs *regs) case -ERESTART_RESTARTBLOCK: regs->gprs[2] = -EINTR; } - regs->trap = -1; /* Don't deal with this again. */ + regs->svcnr = 0; /* Don't deal with this again. */ } /* Get signal to deliver. When running under ptrace, at this point -- cgit v1.2.3 From 8107d8296baff899db89c1716fe8af69a5b19d18 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 27 Nov 2008 11:05:56 +0100 Subject: [S390] fix/cleanup sched_clock CONFIG_PRINTK_TIME reveals that sched_clock has a wrong offset during boot: .. [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775679 [ 0.000000] Kernel command line: dasd=4b6c root=/dev/dasda1 ro noinitrd [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [6920575.975232] console [ttyS0] enabled [6920575.987586] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [6920575.991404] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) .. The s390 implementation of sched_clock uses the store clock instruction and subtracts jiffies_timer_cc. jiffies_timer_cc is a local variable in arch/s390/kernel/time.c and only used for sched_clock and monotonic clock. For historical reasons there is an offset on that value. With todays code this offset is unnecessary. By removing that offset we can get a sched_clock which returns the nanoseconds after time_init. This improves CONFIG_PRINTK_TIME. Since sched_clock is the only user, I have also renamed jiffies_timer_cc to sched_clock_base_cc. In addition, the local variable init_timer_cc is redundant and can be romved as well. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/time.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index b94e9e3b694a..eccefbbff887 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -59,7 +59,7 @@ static ext_int_info_t ext_int_info_cc; static ext_int_info_t ext_int_etr_cc; -static u64 jiffies_timer_cc; +static u64 sched_clock_base_cc; static DEFINE_PER_CPU(struct clock_event_device, comparators); @@ -68,7 +68,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators); */ unsigned long long sched_clock(void) { - return ((get_clock_xt() - jiffies_timer_cc) * 125) >> 9; + return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9; } /* @@ -229,13 +229,10 @@ static struct clocksource clocksource_tod = { */ void __init time_init(void) { - u64 init_timer_cc; - - init_timer_cc = reset_tod_clock(); - jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY; + sched_clock_base_cc = reset_tod_clock(); /* set xtime */ - tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime); + tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime); set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); @@ -289,7 +286,7 @@ static unsigned long long adjust_time(unsigned long long old, delta = -delta; adjust.offset = -ticks * (1000000 / HZ); } - jiffies_timer_cc += delta; + sched_clock_base_cc += delta; if (adjust.offset != 0) { printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n", adjust.offset); -- cgit v1.2.3 From 2944a5c971c12766e2438ea407ec3567949c32b7 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 27 Nov 2008 11:05:57 +0100 Subject: [S390] pgtable.h: Fix oops in unmap_vmas for KVM processes When running several kvm processes with lots of memory overcommitment, we have seen an oops during process shutdown: ------------[ cut here ]------------ Kernel BUG at 0000000000193434 [verbose debug info unavailable] addressing exception: 0005 [#1] PREEMPT SMP Modules linked in: kvm sunrpc qeth_l2 dm_mod qeth ccwgroup CPU: 10 Not tainted 2.6.28-rc4-kvm-bigiron-00521-g0ccca08-dirty #8 Process kuli (pid: 14460, task: 0000000149822338, ksp: 0000000024f57650) Krnl PSW : 0704e00180000000 0000000000193434 (unmap_vmas+0x884/0xf10) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000002 0000000000000000 000000051008d000 000003e05e6034e0 00000000001933f6 00000000000001e9 0000000407259e0a 00000002be88c400 00000200001c1000 0000000407259608 0000000407259e08 0000000024f577f0 0000000407259e09 0000000000445fa8 00000000001933f6 0000000024f577f0 Krnl Code: 0000000000193426: eb22000c000d sllg %r2,%r2,12 000000000019342c: a7180000 lhi %r1,0 0000000000193430: b2290012 iske %r1,%r2 >0000000000193434: a7110002 tmll %r1,2 0000000000193438: a7840006 brc 8,193444 000000000019343c: 9602c000 oi 0(%r12),2 0000000000193440: 96806000 oi 0(%r6),128 0000000000193444: a7110004 tmll %r1,4 Call Trace: ([<00000000001933f6>] unmap_vmas+0x846/0xf10) [<0000000000199680>] exit_mmap+0x210/0x458 [<000000000012a8f8>] mmput+0x54/0xfc [<000000000012f714>] exit_mm+0x134/0x144 [<000000000013120c>] do_exit+0x240/0x878 [<00000000001318dc>] do_group_exit+0x98/0xc8 [<000000000013e6b0>] get_signal_to_deliver+0x30c/0x358 [<000000000010bee0>] do_signal+0xec/0x860 [<0000000000112e30>] sysc_sigpending+0xe/0x22 [<000002000013198a>] 0x2000013198a INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000000001a68d0>] free_swap_and_cache+0x1a0/0x1a4 <4>---[ end trace bc19f1d51ac9db7c ]--- The faulting instruction is the storage key operation (iske) in ptep_rcp_copy (called by pte_clear, called by unmap_vmas). iske reads dirty and reference bit information for a physical page and requires a valid physical address. Since we are in pte_clear, we cannot rely on the pte containing a valid address. Fortunately we dont need these information in pte_clear - after all there is no mapping. The best fix is to remove the needless call to ptep_rcp_copy that contains the iske. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 7fc76133b3e4..5caddd4f7bed 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -679,8 +679,6 @@ static inline void pmd_clear(pmd_t *pmd) static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - if (mm->context.has_pgste) - ptep_rcp_copy(ptep); pte_val(*ptep) = _PAGE_TYPE_EMPTY; if (mm->context.noexec) pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY; -- cgit v1.2.3 From 0778dc3a624b48cf80072b04405cacd1ad4079be Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 27 Nov 2008 11:05:58 +0100 Subject: [S390] Fix alignment of initial kernel stack. We need an alignment of 16384 bytes for the initial kernel stack if the kernel is configured for 16384 bytes stacks but the linker script currently guarantees only an alignment of 8192 bytes. So fix this and simply use THREAD_SIZE as alignment value which will always do the right thing. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/init_task.c | 2 +- arch/s390/kernel/vmlinux.lds.S | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/init_task.c b/arch/s390/kernel/init_task.c index 7ad003969251..e80716843619 100644 --- a/arch/s390/kernel/init_task.c +++ b/arch/s390/kernel/init_task.c @@ -26,7 +26,7 @@ EXPORT_SYMBOL(init_mm); /* * Initial thread structure. * - * We need to make sure that this is 8192-byte aligned due to the + * We need to make sure that this is THREAD_SIZE aligned due to the * way process stacks are handled. This is done by having a special * "init_task" linker map entry.. */ diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 607bd67a18ce..d796d05c9c01 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -2,6 +2,7 @@ * Written by Martin Schwidefsky (schwidefsky@de.ibm.com) */ +#include #include #include @@ -86,7 +87,7 @@ SECTIONS } _edata = .; /* End of data section */ - . = ALIGN(2 * PAGE_SIZE); /* init_task */ + . = ALIGN(THREAD_SIZE); /* init_task */ .data.init_task : { *(.data.init_task) } -- cgit v1.2.3 From abd942194dcba2fa9d24d547b8acd4ef052eaf73 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 27 Nov 2008 11:05:59 +0100 Subject: [S390] Update default configuration. Signed-off-by: Martin Schwidefsky --- arch/s390/defconfig | 74 ++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 51 insertions(+), 23 deletions(-) diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 9b0bc2c9fba0..a0e748da9909 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 19:43:29 2008 +# Linux kernel version: 2.6.28-rc6 +# Thu Nov 27 11:00:49 2008 # CONFIG_SCHED_MC=y CONFIG_MMU=y @@ -45,6 +45,7 @@ CONFIG_LOG_BUF_SHIFT=17 CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CPUSETS is not set CONFIG_GROUP_SCHED=y @@ -84,6 +85,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -92,16 +94,10 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -135,6 +131,7 @@ CONFIG_DEFAULT_DEADLINE=y CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Base setup @@ -189,7 +186,6 @@ CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y @@ -200,9 +196,11 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # I/O subsystem configuration @@ -220,6 +218,8 @@ CONFIG_IPL=y CONFIG_IPL_VM=y CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=9 # CONFIG_PROCESS_DEBUG is not set @@ -255,7 +255,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set -CONFIG_IUCV=m +CONFIG_IUCV=y CONFIG_AFIUCV=m CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -282,7 +282,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -331,10 +330,12 @@ CONFIG_NF_CONNTRACK=m # CONFIG_NF_CONNTRACK_TFTP is not set # CONFIG_NF_CT_NETLINK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_NF_CONNTRACK_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set @@ -374,6 +375,7 @@ CONFIG_NET_SCH_CBQ=m # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=y CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -406,6 +408,7 @@ CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_NAT=m # CONFIG_NET_ACT_PEDIT is not set # CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set # CONFIG_NET_CLS_IND is not set CONFIG_NET_SCH_FIFO=y @@ -424,6 +427,7 @@ CONFIG_CAN_BCM=m CONFIG_CAN_VCAN=m # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_PCMCIA is not set @@ -473,7 +477,7 @@ CONFIG_VIRTIO_BLK=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HAVE_IDE is not set +# CONFIG_C2PORT is not set # # SCSI device support @@ -525,6 +529,7 @@ CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m @@ -555,6 +560,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y # CONFIG_TR is not set @@ -632,13 +640,12 @@ CONFIG_S390_VMUR=m # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# +# CONFIG_REGULATOR is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set CONFIG_ACCESSIBILITY=y +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -650,13 +657,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -688,6 +696,7 @@ CONFIG_GENERIC_ACL=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y @@ -728,6 +737,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -800,12 +810,24 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set # CONFIG_SAMPLE_KPROBES is not set @@ -816,16 +838,19 @@ CONFIG_SAMPLES=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set @@ -877,7 +902,7 @@ CONFIG_CRYPTO_SHA1=m # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -898,6 +923,11 @@ CONFIG_CRYPTO_SEED=m # # CONFIG_CRYPTO_DEFLATE is not set CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y CONFIG_ZCRYPT=m # CONFIG_ZCRYPT_MONOLITHIC is not set @@ -912,8 +942,6 @@ CONFIG_S390_PRNG=m # Library routines # CONFIG_BITREVERSE=m -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y -- cgit v1.2.3 From b627c8b17ccacba38c975bc0f69a49fc4e5261c9 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 20 Nov 2008 20:49:56 +0100 Subject: x86: always define DECLARE_PCI_UNMAP* macros Impact: fix boot crash on AMD IOMMU if CONFIG_GART_IOMMU is off Currently these macros evaluate to a no-op except the kernel is compiled with GART or Calgary support. But we also need these macros when we have SWIOTLB, VT-d or AMD IOMMU in the kernel. Since we always compile at least with SWIOTLB we can define these macros always. This patch is also for stable backport for the same reason the SWIOTLB default selection patch is. Signed-off-by: Joerg Roedel Cc: Signed-off-by: Ingo Molnar --- arch/x86/include/asm/pci_64.h | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/arch/x86/include/asm/pci_64.h b/arch/x86/include/asm/pci_64.h index 5b28995d664e..d02d936840a3 100644 --- a/arch/x86/include/asm/pci_64.h +++ b/arch/x86/include/asm/pci_64.h @@ -34,8 +34,6 @@ extern void pci_iommu_alloc(void); */ #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) -#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU) - #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ dma_addr_t ADDR_NAME; #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ @@ -49,18 +47,6 @@ extern void pci_iommu_alloc(void); #define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ (((PTR)->LEN_NAME) = (VAL)) -#else -/* No IOMMU */ - -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -#endif - #endif /* __KERNEL__ */ #endif /* _ASM_X86_PCI_64_H */ -- cgit v1.2.3 From a730b327ca70f0e4d933202e3979e96613c3585f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 20 Nov 2008 17:34:57 +0100 Subject: [ARM] pxa/palmtx: misc fixes to use generic GPIO API Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmtx.c | 150 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 118 insertions(+), 32 deletions(-) diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 4447711c9fc6..a9d94f5dbec4 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -56,6 +56,9 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO110_MMC_DAT_2, GPIO111_MMC_DAT_3, GPIO112_MMC_CMD, + GPIO14_GPIO, /* SD detect */ + GPIO114_GPIO, /* SD power */ + GPIO115_GPIO, /* SD r/o switch */ /* AC97 */ GPIO28_AC97_BITCLK, @@ -64,6 +67,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO31_AC97_SYNC, /* IrDA */ + GPIO40_GPIO, /* ir disable */ GPIO46_FICP_RXD, GPIO47_FICP_TXD, @@ -71,7 +75,8 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO16_PWM0_OUT, /* USB */ - GPIO13_GPIO, + GPIO13_GPIO, /* usb detect */ + GPIO95_GPIO, /* usb power */ /* PCMCIA */ GPIO48_nPOE, @@ -84,6 +89,45 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO55_nPREG, GPIO56_nPWAIT, GPIO57_nIOIS16, + GPIO94_GPIO, /* wifi power 1 */ + GPIO108_GPIO, /* wifi power 2 */ + GPIO116_GPIO, /* wifi ready */ + + /* MATRIX KEYPAD */ + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO97_KP_MKIN_3, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* MISC. */ + GPIO10_GPIO, /* hotsync button */ + GPIO12_GPIO, /* power detect */ + GPIO107_GPIO, /* earphone detect */ }; /****************************************************************************** @@ -95,32 +139,49 @@ static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int, int err = 0; /* Setup an interrupt for detecting card insert/remove events */ - err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), + palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "SD/MMC card detect", data); if (err) { printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", __func__); - return err; + goto err2; } err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER"); if (err) - goto pwr_err; + goto err3; + err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0); + if (err) + goto err4; err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY"); if (err) - goto ro_err; + goto err4; + err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY); + if (err) + goto err5; printk(KERN_DEBUG "%s: irq registered\n", __func__); return 0; -ro_err: +err5: + gpio_free(GPIO_NR_PALMTX_SD_READONLY); +err4: gpio_free(GPIO_NR_PALMTX_SD_POWER); -pwr_err: - free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMTX_SD_DETECT_N); +err: return err; } @@ -128,7 +189,8 @@ static void palmtx_mci_exit(struct device *dev, void *data) { gpio_free(GPIO_NR_PALMTX_SD_READONLY); gpio_free(GPIO_NR_PALMTX_SD_POWER); - free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data); + free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data); + gpio_free(GPIO_NR_PALMTX_SD_DETECT_N); } static void palmtx_mci_power(struct device *dev, unsigned int vdd) @@ -167,7 +229,6 @@ static unsigned int palmtx_matrix_keys[] = { KEY(3, 0, KEY_RIGHT), KEY(3, 2, KEY_LEFT), - }; static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = { @@ -209,11 +270,19 @@ static int palmtx_backlight_init(struct device *dev) ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER"); if (ret) goto err; + ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0); + if (ret) + goto err2; ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER"); if (ret) goto err2; + ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0); + if (ret) + goto err3; return 0; +err3: + gpio_free(GPIO_NR_PALMTX_LCD_POWER); err2: gpio_free(GPIO_NR_PALMTX_BL_POWER); err: @@ -254,6 +323,24 @@ static struct platform_device palmtx_backlight = { /****************************************************************************** * IrDA ******************************************************************************/ +static int palmtx_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMTX_IR_DISABLE); +err: + return err; +} + +static void palmtx_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTX_IR_DISABLE); +} + static void palmtx_irda_transceiver_mode(struct device *dev, int mode) { gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF); @@ -261,6 +348,8 @@ static void palmtx_irda_transceiver_mode(struct device *dev, int mode) } static struct pxaficp_platform_data palmtx_ficp_platform_data = { + .startup = palmtx_irda_startup, + .shutdown = palmtx_irda_shutdown, .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, .transceiver_mode = palmtx_irda_transceiver_mode, }; @@ -268,17 +357,11 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = { /****************************************************************************** * UDC ******************************************************************************/ -static void palmtx_udc_command(int cmd) -{ - gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd); - udelay(50); - gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd); -} - static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N, .gpio_vbus_inverted = 1, - .udc_command = palmtx_udc_command, + .gpio_pullup = GPIO_NR_PALMTX_USB_POWER, + .gpio_pullup_inverted = 0, }; /****************************************************************************** @@ -290,17 +373,16 @@ static int power_supply_init(struct device *dev) ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC"); if (ret) - goto err_cs_ac; - - ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB"); + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT); if (ret) - goto err_cs_usb; + goto err2; return 0; -err_cs_usb: +err2: gpio_free(GPIO_NR_PALMTX_POWER_DETECT); -err_cs_ac: +err1: return ret; } @@ -309,14 +391,8 @@ static int palmtx_is_ac_online(void) return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT); } -static int palmtx_is_usb_online(void) -{ - return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N); -} - static void power_supply_exit(struct device *dev) { - gpio_free(GPIO_NR_PALMTX_USB_DETECT_N); gpio_free(GPIO_NR_PALMTX_POWER_DETECT); } @@ -327,7 +403,6 @@ static char *palmtx_supplicants[] = { static struct pda_power_pdata power_supply_info = { .init = power_supply_init, .is_ac_online = palmtx_is_ac_online, - .is_usb_online = palmtx_is_usb_online, .exit = power_supply_exit, .supplied_to = palmtx_supplicants, .num_supplicants = ARRAY_SIZE(palmtx_supplicants), @@ -410,12 +485,23 @@ static void __init palmtx_map_io(void) iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc)); } +/* setup udc GPIOs initial state */ +static void __init palmtx_udc_init(void) +{ + if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1); + gpio_free(GPIO_NR_PALMTX_USB_POWER); + } +} + + static void __init palmtx_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config)); set_pxa_fb_info(&palmtx_lcd_screen); pxa_set_mci_info(&palmtx_mci_platform_data); + palmtx_udc_init(); pxa_set_udc_info(&palmtx_udc_info); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmtx_ficp_platform_data); -- cgit v1.2.3 From 52b19ac993f1aeadbce15b55302be9a35346e235 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 23 Sep 2008 18:24:08 +0200 Subject: udf: Fix BUG_ON() in destroy_inode() udf_clear_inode() can leave behind buffers on mapping's i_private list (when we truncated preallocation). Call invalidate_inode_buffers() so that the list is properly cleaned-up before we return from udf_clear_inode(). This is ugly and suggest that we should cleanup preallocation earlier than in clear_inode() but currently there's no such call available since drop_inode() is called under inode lock and thus is unusable for disk operations. Signed-off-by: Jan Kara --- fs/buffer.c | 1 + fs/udf/inode.c | 1 + 2 files changed, 2 insertions(+) diff --git a/fs/buffer.c b/fs/buffer.c index 6569fda5cfed..10179cfa1152 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -878,6 +878,7 @@ void invalidate_inode_buffers(struct inode *inode) spin_unlock(&buffer_mapping->private_lock); } } +EXPORT_SYMBOL(invalidate_inode_buffers); /* * Remove any clean buffers from the inode's buffer list. This is called diff --git a/fs/udf/inode.c b/fs/udf/inode.c index 6e74b117aaf0..30ebde490f7f 100644 --- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -106,6 +106,7 @@ void udf_clear_inode(struct inode *inode) udf_truncate_tail_extent(inode); unlock_kernel(); write_inode_now(inode, 0); + invalidate_inode_buffers(inode); } iinfo = UDF_I(inode); kfree(iinfo->i_ext.i_data); -- cgit v1.2.3 From 487ff32082a9bd7489d8185cf7d7a2fdf18a22fa Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 27 Nov 2008 11:13:58 +0000 Subject: Allow architectures to override copy_user_highpage() With aliasing VIPT cache support, the ARM implementation of clear_user_page() and copy_user_page() sets up a temporary kernel space mapping such that we have the same cache colour as the userspace page. This avoids having to consider any userspace aliases from this operation. However, when highmem is enabled, kmap_atomic() have to setup mappings. The copy_user_highpage() and clear_user_highpage() call these functions before delegating the copies to copy_user_page() and clear_user_page(). The effect of this is that each of the *_user_highpage() functions setup their own kmap mapping, followed by the *_user_page() functions setting up another mapping. This is rather wasteful. Thankfully, copy_user_highpage() can be overriden by architectures by defining __HAVE_ARCH_COPY_USER_HIGHPAGE. However, replacement of clear_user_highpage() is more difficult because its inline definition is not conditional. It seems that you're expected to define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE and provide a replacement __alloc_zeroed_user_highpage() implementation instead. The allocation itself is fine, so we don't want to override that. What we really want to do is to override clear_user_highpage() with our own version which doesn't kmap_atomic() unnecessarily. Other VIPT architectures (PARISC and SH) would also like to override this function as well. Acked-by: Hugh Dickins Acked-by: James Bottomley Acked-by: Paul Mundt Signed-off-by: Russell King --- include/linux/highmem.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/highmem.h b/include/linux/highmem.h index 7dcbc82f3b7b..13875ce9112a 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -63,12 +63,14 @@ static inline void *kmap_atomic(struct page *page, enum km_type idx) #endif /* CONFIG_HIGHMEM */ /* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */ +#ifndef clear_user_highpage static inline void clear_user_highpage(struct page *page, unsigned long vaddr) { void *addr = kmap_atomic(page, KM_USER0); clear_user_page(addr, vaddr, page); kunmap_atomic(addr, KM_USER0); } +#endif #ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE /** -- cgit v1.2.3 From ee8a1a0a1a5817accd03ced7e7ffde3a4430f485 Mon Sep 17 00:00:00 2001 From: Jan Scholz Date: Wed, 26 Nov 2008 15:33:45 +0100 Subject: HID: Apple ALU wireless keyboards are bluetooth devices While parsing 'hid_blacklist' in the apple alu wireless keyboard is not found. This happens because in the blacklist it is declared with HID_USB_DEVICE although the keyboards are really bluetooth devices. The same holds for 'apple_devices' list. This patch fixes it by changing HID_USB_DEVICE to HID_BLUETOOTH_DEVICE in those two lists. Signed-off-by: Jan Scholz Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 6 +++--- drivers/hid/hid-core.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 9b97795e45ad..aa28aed0e46c 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -400,12 +400,12 @@ static const struct hid_device_id apple_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | APPLE_RDESC_JIS }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO), + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS), + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI), .driver_data = APPLE_HAS_FN }, diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 026a46333fda..40df3e1b4bd1 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1241,9 +1241,9 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) }, -- cgit v1.2.3 From d1846b0e7a1dc26f90fb0d75641aca9abb077ef9 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 28 Nov 2008 15:24:38 +0100 Subject: i2c/isp1301_omap: Build fixes Build fixes for isp1301_omap; no behavior changes: - fix incorrect probe() signature (it changed many months ago) - provide missing functions on H3 and H4 boards - "sparse" fixes (static, NULL-vs-0) The H3 build bits subset some of the stuff that was previously in the OMAP tree but never went to mainline. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- drivers/i2c/chips/isp1301_omap.c | 65 +++++++++++++++++++++++++++++----------- 1 file changed, 47 insertions(+), 18 deletions(-) diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 28902ebd5539..e0d56ef2bcb0 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -33,7 +34,10 @@ #include #include +#include + #include +#include #ifndef DEBUG @@ -88,14 +92,9 @@ struct isp1301 { /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_MACH_OMAP_H2 - /* board-specific PM hooks */ -#include -#include -#include - +#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) #if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) @@ -133,6 +132,33 @@ static inline void notresponding(struct isp1301 *isp) } +#endif + +#if defined(CONFIG_MACH_OMAP_H4) + +static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) +{ + /* H4 controls this by DIP switch S2.4; no soft control. + * ON means the charger is always enabled. Leave it OFF + * unless the OTG port is used only in B-peripheral mode. + */ +} + +static void enable_vbus_source(struct isp1301 *isp) +{ + /* this board won't supply more than 8mA vbus power. + * some boards can switch a 100ma "unit load" (or more). + */ +} + + +/* products will deliver OTG messages with LEDs, GUI, etc */ +static inline void notresponding(struct isp1301 *isp) +{ + printk(KERN_NOTICE "OTG device not responding.\n"); +} + + #endif /*-------------------------------------------------------------------------*/ @@ -334,8 +360,7 @@ static int gadget_suspend(struct isp1301 *isp) * NOTE: guaranteeing certain response times might mean we shouldn't * share keventd's work queue; a realtime task might be safest. */ -void -isp1301_defer_work(struct isp1301 *isp, int work) +static void isp1301_defer_work(struct isp1301 *isp, int work) { int status; @@ -512,7 +537,6 @@ static void update_otg1(struct isp1301 *isp, u8 int_src) otg_ctrl &= ~OTG_XCEIV_INPUTS; otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD); - if (int_src & INTR_SESS_VLD) otg_ctrl |= OTG_ASESSVLD; else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) { @@ -886,11 +910,11 @@ static int otg_probe(struct platform_device *dev) static int otg_remove(struct platform_device *dev) { - otg_dev = 0; + otg_dev = NULL; return 0; } -struct platform_driver omap_otg_driver = { +static struct platform_driver omap_otg_driver = { .probe = otg_probe, .remove = otg_remove, .driver = { @@ -1212,6 +1236,8 @@ static void isp1301_release(struct device *dev) isp = dev_get_drvdata(dev); + /* FIXME -- not with a "new style" driver, it doesn't!! */ + /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ if (isp->i2c_release) isp->i2c_release(dev); @@ -1233,7 +1259,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) otg_unbind(isp); #endif if (machine_is_omap_h2()) - omap_free_gpio(2); + gpio_free(2); isp->timer.data = 0; set_bit(WORK_STOP, &isp->todo); @@ -1241,7 +1267,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) flush_scheduled_work(); put_device(&i2c->dev); - the_transceiver = 0; + the_transceiver = NULL; return 0; } @@ -1295,7 +1321,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) if (!host) { omap_writew(0, OTG_IRQ_EN); power_down(isp); - isp->otg.host = 0; + isp->otg.host = NULL; return 0; } @@ -1344,7 +1370,9 @@ static int isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) { struct isp1301 *isp = container_of(otg, struct isp1301, otg); +#ifndef CONFIG_USB_OTG u32 l; +#endif if (!otg || isp != the_transceiver) return -ENODEV; @@ -1354,7 +1382,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) if (!isp->otg.default_a) enable_vbus_draw(isp, 0); usb_gadget_vbus_disconnect(isp->otg.gadget); - isp->otg.gadget = 0; + isp->otg.gadget = NULL; power_down(isp); return 0; } @@ -1379,7 +1407,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) power_up(isp); isp->otg.state = OTG_STATE_B_IDLE; - if (machine_is_omap_h2()) + if (machine_is_omap_h2() || machine_is_omap_h3()) isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, @@ -1499,7 +1527,8 @@ isp1301_start_hnp(struct otg_transceiver *dev) /*-------------------------------------------------------------------------*/ -static int __init isp1301_probe(struct i2c_client *i2c) +static int __init +isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { int status; struct isp1301 *isp; @@ -1647,7 +1676,7 @@ module_init(isp_init); static void __exit isp_exit(void) { if (the_transceiver) - otg_set_transceiver(0); + otg_set_transceiver(NULL); i2c_del_driver(&isp1301_driver); } module_exit(isp_exit); -- cgit v1.2.3 From 79b93e1359b1414b438f239c6e5e0ad91232e4c8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 28 Nov 2008 15:24:38 +0100 Subject: i2c: Remove i2c clients in reverse order i2c clients should be removed in reverse order compared to the probe (actually: bind) order. This matters when several clients depend on each other. Signed-off-by: Jean Delvare Tested-by: Guennadi Liakhovetski --- drivers/i2c/i2c-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 5a485c22660a..c6a63f46bc15 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -631,7 +631,7 @@ int i2c_del_adapter(struct i2c_adapter *adap) /* detach any active clients. This must be done first, because * it can fail; in which case we give up. */ - list_for_each_entry_safe(client, _n, &adap->clients, list) { + list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) { struct i2c_driver *driver; driver = client->driver; -- cgit v1.2.3 From 7b964f733798960c899dc40911329aee7bee25e4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 28 Nov 2008 15:24:39 +0100 Subject: i2c-parport: Fix misplaced parport_release call We shouldn't release the parallel port until we are actually done with it. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-parport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 59ba2086d2f9..a257cd5cd134 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -189,8 +189,6 @@ static void i2c_parport_attach (struct parport *port) if (adapter_parm[type].init.val) line_set(port, 1, &adapter_parm[type].init); - parport_release(adapter->pdev); - if (i2c_bit_add_bus(&adapter->adapter) < 0) { printk(KERN_ERR "i2c-parport: Unable to register with I2C\n"); goto ERROR1; @@ -202,6 +200,7 @@ static void i2c_parport_attach (struct parport *port) return; ERROR1: + parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); ERROR0: kfree(adapter); @@ -221,6 +220,7 @@ static void i2c_parport_detach (struct parport *port) if (adapter_parm[type].init.val) line_set(port, 0, &adapter_parm[type].init); + parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); if (prev) prev->next = adapter->next; -- cgit v1.2.3 From 23d0a65cf229acd273b6f5a325c34d758a90d592 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Fri, 28 Nov 2008 08:19:09 -0800 Subject: toshiba_acpi: close race in toshiba_acpi driver the toshiba ACPI driver will, in a failure case, free the rfkill state before stopping the polling timer that would use this state. More interesting, in the same failure case handling, it calls the exit function, which also frees the rfkill state, but after stopping the polling. If the race happens, a NULL pointer is passed to rfkill_force_state() which then causes a nice dereference. Fix the race by just not doing the too-early freeing of the rfkill state. This appears to be the cause of a hot issue on kerneloops.org; while I have no solid evidence of that this patch will fix the issue, the race appears rather real. Signed-off-by: Arjan van de Ven Signed-off-by: Len Brown --- drivers/acpi/toshiba_acpi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 66aac06f2ac5..25f531d892de 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -848,8 +848,6 @@ static int __init toshiba_acpi_init(void) ret = input_register_polled_device(toshiba_acpi.poll_dev); if (ret) { printk(MY_ERR "unable to register kill-switch input device\n"); - rfkill_free(toshiba_acpi.rfk_dev); - toshiba_acpi.rfk_dev = NULL; toshiba_acpi_exit(); return ret; } -- cgit v1.2.3 From 9a5aa622dd4cd22b5e0fe83e4a9c0c768d4e2dea Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Fri, 28 Nov 2008 21:29:46 -0800 Subject: mlx4_core: Save/restore default port IB capability mask Commit 7ff93f8b ("mlx4_core: Multiple port type support") introduced support for different port types. As part of that support, SET_PORT is invoked to set the port type during driver startup. However, as a side-effect, for IB ports the invocation of this command also sets the port's capability mask to zero (losing the default value set by FW). To fix this, get the default ib port capabilities (via a MAD_IFC Port Info query) during driver startup, and save them for use in the mlx4_SET_PORT command when setting the port-type to Infiniband. This patch fixes problems with subnet manager (SM) failover such as , which occurred because the IsTrapSupported bit in the capability mask was zeroed. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/net/mlx4/main.c | 8 ++++++++ drivers/net/mlx4/mlx4.h | 1 + drivers/net/mlx4/port.c | 39 ++++++++++++++++++++++++++++++++++++++- include/linux/mlx4/device.h | 1 + 4 files changed, 48 insertions(+), 1 deletion(-) diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 468921b8f4b6..90a0281d15ea 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -753,6 +753,7 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); int err; int port; + __be32 ib_port_default_caps; err = mlx4_init_uar_table(dev); if (err) { @@ -852,6 +853,13 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) } for (port = 1; port <= dev->caps.num_ports; port++) { + ib_port_default_caps = 0; + err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps); + if (err) + mlx4_warn(dev, "failed to get port %d default " + "ib capabilities (%d). Continuing with " + "caps = 0\n", port, err); + dev->caps.ib_port_def_cap[port] = ib_port_default_caps; err = mlx4_SET_PORT(dev, port); if (err) { mlx4_err(dev, "Failed to set port %d, aborting\n", diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index 56a2e213fe62..34c909deaff3 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -385,5 +385,6 @@ void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table); void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table); int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port); +int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps); #endif /* MLX4_H */ diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c index e2fdab42c4ce..0a057e5dc63b 100644 --- a/drivers/net/mlx4/port.c +++ b/drivers/net/mlx4/port.c @@ -258,6 +258,42 @@ out: } EXPORT_SYMBOL_GPL(mlx4_unregister_vlan); +int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps) +{ + struct mlx4_cmd_mailbox *inmailbox, *outmailbox; + u8 *inbuf, *outbuf; + int err; + + inmailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(inmailbox)) + return PTR_ERR(inmailbox); + + outmailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(outmailbox)) { + mlx4_free_cmd_mailbox(dev, inmailbox); + return PTR_ERR(outmailbox); + } + + inbuf = inmailbox->buf; + outbuf = outmailbox->buf; + memset(inbuf, 0, 256); + memset(outbuf, 0, 256); + inbuf[0] = 1; + inbuf[1] = 1; + inbuf[2] = 1; + inbuf[3] = 1; + *(__be16 *) (&inbuf[16]) = cpu_to_be16(0x0015); + *(__be32 *) (&inbuf[20]) = cpu_to_be32(port); + + err = mlx4_cmd_box(dev, inmailbox->dma, outmailbox->dma, port, 3, + MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C); + if (!err) + *caps = *(__be32 *) (outbuf + 84); + mlx4_free_cmd_mailbox(dev, inmailbox); + mlx4_free_cmd_mailbox(dev, outmailbox); + return err; +} + int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) { struct mlx4_cmd_mailbox *mailbox; @@ -273,7 +309,8 @@ int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) ((u8 *) mailbox->buf)[3] = 6; ((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15); ((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15); - } + } else + ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port]; err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B); diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index bd9977b89490..371086fd946f 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -179,6 +179,7 @@ struct mlx4_caps { int num_ports; int vl_cap[MLX4_MAX_PORTS + 1]; int ib_mtu_cap[MLX4_MAX_PORTS + 1]; + __be32 ib_port_def_cap[MLX4_MAX_PORTS + 1]; u64 def_mac[MLX4_MAX_PORTS + 1]; int eth_mtu_cap[MLX4_MAX_PORTS + 1]; int gid_table_len[MLX4_MAX_PORTS + 1]; -- cgit v1.2.3 From e6358135147807351db3b7782d3e198a1bba8b62 Mon Sep 17 00:00:00 2001 From: Frédéric Moulins Date: Fri, 28 Nov 2008 22:12:02 -0800 Subject: pppol2tp: Add missing sock_put() in pppol2tp_release() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit pppol2tp_sock_to_session() do sock_hold() if the session to release is not NULL. Signed-off-by: Frédéric Moulins Signed-off-by: David S. Miller --- drivers/net/pppol2tp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 185b1dff10a8..e98d9773158d 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -1353,6 +1353,7 @@ static int pppol2tp_release(struct socket *sock) kfree_skb(skb); sock_put(sk); } + sock_put(sk); } release_sock(sk); -- cgit v1.2.3 From e47c1feb17e61ef4e2f245c0af0c5a8e2a7798b2 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 26 Nov 2008 01:34:25 +0100 Subject: ieee1394: fix list corruption (reported at module removal) If there is more than one FireWire controller present, dummy_zero_addr and dummy_max_addr were added multiple times to different lists, thus corrupting the lists. Fix this by allocating them dynamically per host instead of just once globally. (Perhaps a better address space allocation algorithm could rid us of the two dummy address spaces.) Fixes http://bugzilla.kernel.org/show_bug.cgi?id=10129 . Signed-off-by: Stefan Richter --- drivers/ieee1394/highlevel.c | 25 ++++++++++++------------- drivers/ieee1394/hosts.h | 4 ++++ 2 files changed, 16 insertions(+), 13 deletions(-) diff --git a/drivers/ieee1394/highlevel.c b/drivers/ieee1394/highlevel.c index 918ffc4fc8ac..272543a42a43 100644 --- a/drivers/ieee1394/highlevel.c +++ b/drivers/ieee1394/highlevel.c @@ -46,10 +46,6 @@ static DEFINE_RWLOCK(hl_irqs_lock); static DEFINE_RWLOCK(addr_space_lock); -/* addr_space list will have zero and max already included as bounds */ -static struct hpsb_address_ops dummy_ops = { NULL, NULL, NULL, NULL }; -static struct hpsb_address_serve dummy_zero_addr, dummy_max_addr; - static struct hl_host_info *hl_get_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host) @@ -481,20 +477,23 @@ int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, return retval; } +static struct hpsb_address_ops dummy_ops; + +/* dummy address spaces as lower and upper bounds of the host's a.s. list */ static void init_hpsb_highlevel(struct hpsb_host *host) { - INIT_LIST_HEAD(&dummy_zero_addr.host_list); - INIT_LIST_HEAD(&dummy_zero_addr.hl_list); - INIT_LIST_HEAD(&dummy_max_addr.host_list); - INIT_LIST_HEAD(&dummy_max_addr.hl_list); + INIT_LIST_HEAD(&host->dummy_zero_addr.host_list); + INIT_LIST_HEAD(&host->dummy_zero_addr.hl_list); + INIT_LIST_HEAD(&host->dummy_max_addr.host_list); + INIT_LIST_HEAD(&host->dummy_max_addr.hl_list); - dummy_zero_addr.op = dummy_max_addr.op = &dummy_ops; + host->dummy_zero_addr.op = host->dummy_max_addr.op = &dummy_ops; - dummy_zero_addr.start = dummy_zero_addr.end = 0; - dummy_max_addr.start = dummy_max_addr.end = ((u64) 1) << 48; + host->dummy_zero_addr.start = host->dummy_zero_addr.end = 0; + host->dummy_max_addr.start = host->dummy_max_addr.end = ((u64) 1) << 48; - list_add_tail(&dummy_zero_addr.host_list, &host->addr_space); - list_add_tail(&dummy_max_addr.host_list, &host->addr_space); + list_add_tail(&host->dummy_zero_addr.host_list, &host->addr_space); + list_add_tail(&host->dummy_max_addr.host_list, &host->addr_space); } void highlevel_add_host(struct hpsb_host *host) diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h index e4e8aeb4d778..dd229950acca 100644 --- a/drivers/ieee1394/hosts.h +++ b/drivers/ieee1394/hosts.h @@ -13,6 +13,7 @@ struct module; #include "ieee1394_types.h" #include "csr.h" +#include "highlevel.h" struct hpsb_packet; struct hpsb_iso; @@ -72,6 +73,9 @@ struct hpsb_host { struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES]; struct csr_control csr; + + struct hpsb_address_serve dummy_zero_addr; + struct hpsb_address_serve dummy_max_addr; }; enum devctl_cmd { -- cgit v1.2.3 From 2642b11295ebcc94843045933061bfbb263fce7f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 29 Nov 2008 14:55:47 +0100 Subject: ieee1394: sbp2: fix race condition in state change An intermediate transition from _RUNNING to _IN_SHUTDOWN could have been missed by the former code. Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 3f5dbcb21605..a373c18cf7b8 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -895,12 +895,13 @@ static void sbp2_host_reset(struct hpsb_host *host) return; read_lock_irqsave(&sbp2_hi_logical_units_lock, flags); + list_for_each_entry(lu, &hi->logical_units, lu_list) - if (likely(atomic_read(&lu->state) != - SBP2LU_STATE_IN_SHUTDOWN)) { - atomic_set(&lu->state, SBP2LU_STATE_IN_RESET); + if (atomic_cmpxchg(&lu->state, + SBP2LU_STATE_RUNNING, SBP2LU_STATE_IN_RESET) + == SBP2LU_STATE_RUNNING) scsi_block_requests(lu->shost); - } + read_unlock_irqrestore(&sbp2_hi_logical_units_lock, flags); } -- cgit v1.2.3 From 1583715ddb61f822041807a0f18b3b4845e88c76 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 25 Nov 2008 10:27:49 +0100 Subject: sched, cpusets: fix warning in kernel/cpuset.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit this warning: kernel/cpuset.c: In function ‘generate_sched_domains’: kernel/cpuset.c:588: warning: ‘ndoms’ may be used uninitialized in this function triggers because GCC does not recognize that ndoms stays uninitialized only if doms is NULL - but that flow is covered at the end of generate_sched_domains(). Help out GCC by initializing this variable to 0. (that's prudent anyway) Also, this function needs a splitup and code flow simplification: with 160 lines length it's clearly too long. Signed-off-by: Ingo Molnar --- kernel/cpuset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index da7ff6137f37..96c0ba13b8cd 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -585,7 +585,7 @@ static int generate_sched_domains(cpumask_t **domains, int i, j, k; /* indices for partition finding loops */ cpumask_t *doms; /* resulting partition; i.e. sched domains */ struct sched_domain_attr *dattr; /* attributes for custom domains */ - int ndoms; /* number of sched domains in result */ + int ndoms = 0; /* number of sched domains in result */ int nslot; /* next empty doms[] cpumask_t slot */ doms = NULL; -- cgit v1.2.3 From af6d596fd603219b054c1c90fb16672a9fd441bd Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 29 Nov 2008 20:45:15 +0100 Subject: sched: prevent divide by zero error in cpu_avg_load_per_task, update Regarding the bug addressed in: 4cd4262: sched: prevent divide by zero error in cpu_avg_load_per_task Linus points out that the fix is not complete: > There's nothing that keeps gcc from deciding not to reload > rq->nr_running. > > Of course, in _practice_, I don't think gcc ever will (if it decides > that it will spill, gcc is likely going to decide that it will > literally spill the local variable to the stack rather than decide to > reload off the pointer), but it's a valid compiler optimization, and > it even has a name (rematerialization). > > So I suspect that your patch does fix the bug, but it still leaves the > fairly unlikely _potential_ for it to re-appear at some point. > > We have ACCESS_ONCE() as a macro to guarantee that the compiler > doesn't rematerialize a pointer access. That also would clarify > the fact that we access something unsafe outside a lock. So make sure our nr_running value is immutable and cannot change after we check it for nonzero. Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 700aa9a1413f..b7480fb5c3dc 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1453,7 +1453,7 @@ static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd); static unsigned long cpu_avg_load_per_task(int cpu) { struct rq *rq = cpu_rq(cpu); - unsigned long nr_running = rq->nr_running; + unsigned long nr_running = ACCESS_ONCE(rq->nr_running); if (nr_running) rq->avg_load_per_task = rq->load.weight / nr_running; -- cgit v1.2.3 From 7b1dedca42ac0d0d0be01e39d8461bb53a2389b3 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Sat, 29 Nov 2008 13:46:27 +0100 Subject: x86: fix dma_mapping_error for 32bit x86 Devices like b44 ethernet can't dma from addresses above 1GB. The driver handles this cases by falling back to GFP_DMA allocation. But for detecting the problem it needs to get an indication from dma_mapping_error. The bug is triggered by using a VMSPLIT option of 2G/2G. Signed-off-by: Thomas Bogendoerfer Acked-by: FUJITA Tomonori Signed-off-by: Ingo Molnar --- arch/x86/include/asm/dma-mapping.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index 7f225a4b2a26..097794ff6b79 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -71,15 +71,13 @@ static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) /* Make sure we keep the same behaviour */ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { -#ifdef CONFIG_X86_32 - return 0; -#else +#ifdef CONFIG_X86_64 struct dma_mapping_ops *ops = get_dma_ops(dev); if (ops->mapping_error) return ops->mapping_error(dev, dma_addr); - return (dma_addr == bad_dma_address); #endif + return (dma_addr == bad_dma_address); } #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -- cgit v1.2.3 From aac725cf1649d593a13be1edc99ed489f8050a99 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 29 Nov 2008 20:42:28 -0800 Subject: ATM: horizon, fix hrz_probe fail path One fail path in hrz_probe omitted device disable. Fix it. Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller --- drivers/atm/horizon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c index 615412364e99..6b969f8c684f 100644 --- a/drivers/atm/horizon.c +++ b/drivers/atm/horizon.c @@ -2705,7 +2705,7 @@ static int __devinit hrz_probe(struct pci_dev *pci_dev, const struct pci_device_ /* XXX DEV_LABEL is a guess */ if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) { - return -EINVAL; + err = -EINVAL; goto out_disable; } -- cgit v1.2.3 From 31168481c32c8a485e1003af9433124dede57f8d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:33:24 +0000 Subject: meminit section warnings Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/linux/page_cgroup.h | 4 ++-- mm/memory_hotplug.c | 9 +++++---- mm/page_cgroup.c | 13 +++++++------ mm/sparse.c | 2 +- 4 files changed, 15 insertions(+), 13 deletions(-) diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index f546ad6fc028..1e6d34bfa094 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -17,7 +17,7 @@ struct page_cgroup { struct list_head lru; /* per cgroup LRU list */ }; -void __init pgdat_page_cgroup_init(struct pglist_data *pgdat); +void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat); void __init page_cgroup_init(void); struct page_cgroup *lookup_page_cgroup(struct page *page); @@ -91,7 +91,7 @@ static inline void unlock_page_cgroup(struct page_cgroup *pc) #else /* CONFIG_CGROUP_MEM_RES_CTLR */ struct page_cgroup; -static inline void pgdat_page_cgroup_init(struct pglist_data *pgdat) +static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat) { } diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index b5b2b15085a8..b17371185468 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -189,7 +189,7 @@ static void grow_pgdat_span(struct pglist_data *pgdat, unsigned long start_pfn, pgdat->node_start_pfn; } -static int __add_zone(struct zone *zone, unsigned long phys_start_pfn) +static int __meminit __add_zone(struct zone *zone, unsigned long phys_start_pfn) { struct pglist_data *pgdat = zone->zone_pgdat; int nr_pages = PAGES_PER_SECTION; @@ -216,7 +216,7 @@ static int __add_zone(struct zone *zone, unsigned long phys_start_pfn) return 0; } -static int __add_section(struct zone *zone, unsigned long phys_start_pfn) +static int __meminit __add_section(struct zone *zone, unsigned long phys_start_pfn) { int nr_pages = PAGES_PER_SECTION; int ret; @@ -273,7 +273,7 @@ static int __remove_section(struct zone *zone, struct mem_section *ms) * call this function after deciding the zone to which to * add the new pages. */ -int __add_pages(struct zone *zone, unsigned long phys_start_pfn, +int __ref __add_pages(struct zone *zone, unsigned long phys_start_pfn, unsigned long nr_pages) { unsigned long i; @@ -470,7 +470,8 @@ static void rollback_node_hotadd(int nid, pg_data_t *pgdat) } -int add_memory(int nid, u64 start, u64 size) +/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */ +int __ref add_memory(int nid, u64 start, u64 size) { pg_data_t *pgdat = NULL; int new_pgdat = 0; diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c index 1223d927904d..436c00229e70 100644 --- a/mm/page_cgroup.c +++ b/mm/page_cgroup.c @@ -21,7 +21,7 @@ static unsigned long total_usage; #if !defined(CONFIG_SPARSEMEM) -void __init pgdat_page_cgroup_init(struct pglist_data *pgdat) +void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat) { pgdat->node_page_cgroup = NULL; } @@ -97,7 +97,8 @@ struct page_cgroup *lookup_page_cgroup(struct page *page) return section->page_cgroup + pfn; } -int __meminit init_section_page_cgroup(unsigned long pfn) +/* __alloc_bootmem...() is protected by !slab_available() */ +int __init_refok init_section_page_cgroup(unsigned long pfn) { struct mem_section *section; struct page_cgroup *base, *pc; @@ -158,7 +159,7 @@ void __free_page_cgroup(unsigned long pfn) } } -int online_page_cgroup(unsigned long start_pfn, +int __meminit online_page_cgroup(unsigned long start_pfn, unsigned long nr_pages, int nid) { @@ -183,7 +184,7 @@ int online_page_cgroup(unsigned long start_pfn, return -ENOMEM; } -int offline_page_cgroup(unsigned long start_pfn, +int __meminit offline_page_cgroup(unsigned long start_pfn, unsigned long nr_pages, int nid) { unsigned long start, end, pfn; @@ -197,7 +198,7 @@ int offline_page_cgroup(unsigned long start_pfn, } -static int page_cgroup_callback(struct notifier_block *self, +static int __meminit page_cgroup_callback(struct notifier_block *self, unsigned long action, void *arg) { struct memory_notify *mn = arg; @@ -248,7 +249,7 @@ void __init page_cgroup_init(void) " want\n"); } -void __init pgdat_page_cgroup_init(struct pglist_data *pgdat) +void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat) { return; } diff --git a/mm/sparse.c b/mm/sparse.c index 39db301b920d..083f5b63e7a8 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -570,7 +570,7 @@ static void free_section_usemap(struct page *memmap, unsigned long *usemap) * set. If this is <=0, then that means that the passed-in * map was not consumed and must be freed. */ -int sparse_add_one_section(struct zone *zone, unsigned long start_pfn, +int __meminit sparse_add_one_section(struct zone *zone, unsigned long start_pfn, int nr_pages) { unsigned long section_nr = pfn_to_section_nr(start_pfn); -- cgit v1.2.3 From 7d6a8a1c487422b772201927c454930377d8cf7e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:33:34 +0000 Subject: false __cpuinit positives on alpha pure noise - alpha doesn't have CPU hotplug Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/alpha/kernel/smp.c | 6 +++--- arch/alpha/kernel/traps.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index e657c45d91d2..cf7da10097bb 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -121,7 +121,7 @@ wait_boot_cpu_to_stop(int cpuid) /* * Where secondaries begin a life of C. */ -void __init +void __cpuinit smp_callin(void) { int cpuid = hard_smp_processor_id(); @@ -198,7 +198,7 @@ wait_for_txrdy (unsigned long cpumask) * Send a message to a secondary's console. "START" is one such * interesting message. ;-) */ -static void __init +static void __cpuinit send_secondary_console_msg(char *str, int cpuid) { struct percpu_struct *cpu; @@ -289,7 +289,7 @@ recv_secondary_console_msg(void) /* * Convince the console to have a secondary cpu begin execution. */ -static int __init +static int __cpuinit secondary_cpu_start(int cpuid, struct task_struct *idle) { struct percpu_struct *cpu; diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index c778779007fc..cefc5a355ef9 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -31,7 +31,7 @@ static int opDEC_fix; -static void __init +static void __cpuinit opDEC_check(void) { __asm__ __volatile__ ( @@ -1072,7 +1072,7 @@ give_sigbus: return; } -void __init +void __cpuinit trap_init(void) { /* Tell PAL-code what global pointer we want in the kernel. */ -- cgit v1.2.3 From 4ea8fb9c1cc67bee980dca589ec8d0d4e62858c7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:33:44 +0000 Subject: powerpc set_huge_psize() false positive called only from __init, calls __init. Incidentally, it ought to be static in file. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/powerpc/include/asm/mmu-hash64.h | 1 - arch/powerpc/mm/hugetlbpage.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index 5a441742ffba..68b752626808 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -280,7 +280,6 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access, extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long pstart, unsigned long prot, int psize, int ssize); -extern void set_huge_psize(int psize); extern void add_gpage(unsigned long addr, unsigned long page_size, unsigned long number_of_pages); extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr); diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index a117024ab8cd..7bbf4e4ed430 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -677,7 +677,7 @@ repeat: return err; } -void set_huge_psize(int psize) +static void __init set_huge_psize(int psize) { /* Check that it is a page size supported by the hardware and * that it fits within pagetable limits. */ -- cgit v1.2.3 From 409832f5484cd1e2d8812c3236dffb33d01c359b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:33:54 +0000 Subject: sparc32 cpuinit flase positives All noise since we don't have CPU hotplug there. However, they did expose something very odd-looking in there - poke_viking() does a bunch of identical btfixup each time it's called (i.e. for each CPU). That one is left alone for now; just the trivial misannotation fixes. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc/kernel/cpu.c | 2 +- arch/sparc/kernel/smp.c | 4 ++-- arch/sparc/kernel/sun4d_smp.c | 4 ++-- arch/sparc/kernel/sun4m_smp.c | 2 +- arch/sparc/kernel/trampoline.S | 4 ++-- arch/sparc/mm/srmmu.c | 14 +++++++------- 6 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c index e7a0edfc1a32..1fc17f59c6bf 100644 --- a/arch/sparc/kernel/cpu.c +++ b/arch/sparc/kernel/cpu.c @@ -126,7 +126,7 @@ char *sparc_fpu_type; unsigned int fsr_storage; -void __init cpu_probe(void) +void __cpuinit cpu_probe(void) { int psr_impl, psr_vers, fpu_vers; int i, psr; diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c index 1619ec15c099..e396c1f17a92 100644 --- a/arch/sparc/kernel/smp.c +++ b/arch/sparc/kernel/smp.c @@ -35,7 +35,7 @@ #include "irq.h" -volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,}; +volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,}; unsigned char boot_cpu_id = 0; unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */ @@ -120,7 +120,7 @@ void cpu_panic(void) panic("SMP bolixed\n"); } -struct linux_prom_registers smp_penguin_ctable __initdata = { 0 }; +struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 }; void smp_send_reschedule(int cpu) { diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index 7a6a5e795928..16ab0cb731c5 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -83,7 +83,7 @@ static inline void show_leds(int cpuid) "i" (ASI_M_CTL)); } -void __init smp4d_callin(void) +void __cpuinit smp4d_callin(void) { int cpuid = hard_smp4d_processor_id(); extern spinlock_t sun4d_imsk_lock; @@ -386,7 +386,7 @@ void smp4d_percpu_timer_interrupt(struct pt_regs *regs) extern unsigned int lvl14_resolution; -static void __init smp_setup_percpu_timer(void) +static void __cpuinit smp_setup_percpu_timer(void) { int cpu = hard_smp4d_processor_id(); diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index 5fc386d08c47..4f8d60586b07 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -343,7 +343,7 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs) extern unsigned int lvl14_resolution; -static void __init smp_setup_percpu_timer(void) +static void __cpuinit smp_setup_percpu_timer(void) { int cpu = smp_processor_id(); diff --git a/arch/sparc/kernel/trampoline.S b/arch/sparc/kernel/trampoline.S index 356c56aebc62..5e235c52d667 100644 --- a/arch/sparc/kernel/trampoline.S +++ b/arch/sparc/kernel/trampoline.S @@ -18,7 +18,7 @@ .globl sun4m_cpu_startup, __smp4m_processor_id .globl sun4d_cpu_startup, __smp4d_processor_id - __INIT + __CPUINIT .align 4 /* When we start up a cpu for the first time it enters this routine. @@ -109,7 +109,7 @@ __smp4d_processor_id: /* CPUID in bootbus can be found at PA 0xff0140000 */ #define SUN4D_BOOTBUS_CPUID 0xf0140000 - __INIT + __CPUINIT .align 4 sun4d_cpu_startup: diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index 6a5d7cabc044..dd8aa36f366c 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -1251,7 +1251,7 @@ static inline void map_kernel(void) /* Paging initialization on the Sparc Reference MMU. */ extern void sparc_context_init(int); -void (*poke_srmmu)(void) __initdata = NULL; +void (*poke_srmmu)(void) __cpuinitdata = NULL; extern unsigned long bootmem_init(unsigned long *pages_avail); @@ -1446,7 +1446,7 @@ static void __init init_vac_layout(void) (int)vac_cache_size, (int)vac_line_size); } -static void __init poke_hypersparc(void) +static void __cpuinit poke_hypersparc(void) { volatile unsigned long clear; unsigned long mreg = srmmu_get_mmureg(); @@ -1501,7 +1501,7 @@ static void __init init_hypersparc(void) hypersparc_setup_blockops(); } -static void __init poke_cypress(void) +static void __cpuinit poke_cypress(void) { unsigned long mreg = srmmu_get_mmureg(); unsigned long faddr, tagval; @@ -1589,7 +1589,7 @@ static void __init init_cypress_605(unsigned long mrev) init_cypress_common(); } -static void __init poke_swift(void) +static void __cpuinit poke_swift(void) { unsigned long mreg; @@ -1771,7 +1771,7 @@ static void turbosparc_flush_tlb_page(struct vm_area_struct *vma, unsigned long } -static void __init poke_turbosparc(void) +static void __cpuinit poke_turbosparc(void) { unsigned long mreg = srmmu_get_mmureg(); unsigned long ccreg; @@ -1834,7 +1834,7 @@ static void __init init_turbosparc(void) poke_srmmu = poke_turbosparc; } -static void __init poke_tsunami(void) +static void __cpuinit poke_tsunami(void) { unsigned long mreg = srmmu_get_mmureg(); @@ -1876,7 +1876,7 @@ static void __init init_tsunami(void) tsunami_setup_blockops(); } -static void __init poke_viking(void) +static void __cpuinit poke_viking(void) { unsigned long mreg = srmmu_get_mmureg(); static int smp_catch; -- cgit v1.2.3 From 8c29890aef80702824e2284909ee301ef2430a3e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:34:04 +0000 Subject: sparc64 trivial section misannotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc64/kernel/smp.c | 4 ++-- arch/sparc64/mm/init.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index e5627118e613..f500b0618bb0 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -282,7 +282,7 @@ static unsigned long kimage_addr_to_ra(void *p) return kern_base + (val - KERNBASE); } -static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg) +static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg) { extern unsigned long sparc64_ttable_tl0; extern unsigned long kern_locked_tte_data; @@ -343,7 +343,7 @@ extern unsigned long sparc64_cpu_startup; */ static struct thread_info *cpu_new_thread = NULL; -static int __devinit smp_boot_one_cpu(unsigned int cpu) +static int __cpuinit smp_boot_one_cpu(unsigned int cpu) { struct trap_per_cpu *tb = &trap_block[cpu]; unsigned long entry = diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 3c10daf8fc01..185f34679110 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -956,7 +956,7 @@ int of_node_to_nid(struct device_node *dp) return nid; } -static void add_node_ranges(void) +static void __init add_node_ranges(void) { int i; -- cgit v1.2.3 From 6005e3eb89db99f3737c8f5fe3d97f3262ed7919 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:34:14 +0000 Subject: istallion section warnings stli_findeisabrds() and stli_initbrds() are using __init and called only from __init. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/char/istallion.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 44e5d60f517e..4b10770fa937 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -3739,7 +3739,7 @@ static int stli_getbrdnr(void) * do is go probing around in the usual places hoping we can find it. */ -static int stli_findeisabrds(void) +static int __init stli_findeisabrds(void) { struct stlibrd *brdp; unsigned int iobase, eid, i; @@ -3935,7 +3935,7 @@ static struct stlibrd *stli_allocbrd(void) * can find. */ -static int stli_initbrds(void) +static int __init stli_initbrds(void) { struct stlibrd *brdp, *nxtbrdp; struct stlconf conf; -- cgit v1.2.3 From 596f1034190565529e507e1eb8df6def1c9f5560 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:34:24 +0000 Subject: fix talitos talitos_remove() can be called from talitos_probe() on failure exit path, so it can't be __devexit. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/crypto/talitos.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index b6ad3ac5916e..24607669a52b 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -1357,7 +1357,7 @@ static int hw_supports(struct device *dev, __be32 desc_hdr_template) return ret; } -static int __devexit talitos_remove(struct of_device *ofdev) +static int talitos_remove(struct of_device *ofdev) { struct device *dev = &ofdev->dev; struct talitos_private *priv = dev_get_drvdata(dev); @@ -1622,7 +1622,7 @@ static struct of_platform_driver talitos_driver = { .name = "talitos", .match_table = talitos_match, .probe = talitos_probe, - .remove = __devexit_p(talitos_remove), + .remove = talitos_remove, }; static int __init talitos_init(void) -- cgit v1.2.3 From d16d7667f9c211e8d9b7e2365cc3d3a83fc6a8e2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:34:34 +0000 Subject: icside section warnings icside_register_v[56] is called from (__devinit) icside_probe Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/ide/icside.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 2d848010499d..81f70caeb40f 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -419,7 +419,7 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base, hw->chipset = ide_acorn; } -static int __init +static int __devinit icside_register_v5(struct icside_state *state, struct expansion_card *ec) { void __iomem *base; @@ -473,7 +473,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = { .swdma_mask = ATA_SWDMA2, }; -static int __init +static int __devinit icside_register_v6(struct icside_state *state, struct expansion_card *ec) { void __iomem *ioc_base, *easi_base; -- cgit v1.2.3 From 2fceab0bd8d82509519e9b842a5a7234b2397fb4 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:34:44 +0000 Subject: W1_MASTER_DS1WM should depend on HAVE_CLK Uses clk_...() a lot Acked-by: rmk+kernel@arm.linux.org.uk Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/w1/masters/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index a14d5b6e4c7c..90616822cd20 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -36,7 +36,7 @@ config W1_MASTER_DS2482 config W1_MASTER_DS1WM tristate "Maxim DS1WM 1-wire busmaster" - depends on W1 && ARM + depends on W1 && ARM && HAVE_CLK help Say Y here to enable the DS1WM 1-wire driver, such as that in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like -- cgit v1.2.3 From 30037818f7c1e11cb3742fbecd614ef3dc7b27bb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:34:54 +0000 Subject: advansys fix on ISA-less configs The code if (shost->dma_channel != NO_ISA_DMA) free_dma(shost->dma_channel); in there is triggerable only if we have CONFIG_ISA (we only set ->dma_channel to something other than NO_ISA_DMA under #ifdef CONFIG_ISA). OTOH, free_dma() is not guaranteed to be there in absense of CONFIG_ISA. IOW, driver runs into undefined symbols on PCI-but-not-ISA configs (e.g. on frv) and it's a false positive. Fix: put the entire if () under #ifdef CONFIG_ISA; behaviour doesn't change and dependency on free_dma() disappears for !CONFIG_ISA. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/scsi/advansys.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 218777bfc143..399fe559e4de 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -13872,8 +13872,10 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost, advansys_wide_free_mem(boardp); free_irq(boardp->irq, shost); err_free_dma: +#ifdef CONFIG_ISA if (shost->dma_channel != NO_ISA_DMA) free_dma(shost->dma_channel); +#endif err_free_proc: kfree(boardp->prtbuf); err_unmap: @@ -13894,10 +13896,12 @@ static int advansys_release(struct Scsi_Host *shost) ASC_DBG(1, "begin\n"); scsi_remove_host(shost); free_irq(board->irq, shost); +#ifdef CONFIG_ISA if (shost->dma_channel != NO_ISA_DMA) { ASC_DBG(1, "free_dma()\n"); free_dma(shost->dma_channel); } +#endif if (ASC_NARROW_BOARD(board)) { dma_unmap_single(board->dev, board->dvc_var.asc_dvc_var.overrun_dma, -- cgit v1.2.3 From e669dae6141ff97d3c7566207f5de3b487dcf837 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:35:04 +0000 Subject: of_platform_driver noise on sparce switch to __init for those; unlike powerpc sparc has no hotplug support for that stuff and their ->probe() tends to call __init functions while being declared __devinit. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc64/kernel/pci_fire.c | 2 +- arch/sparc64/kernel/pci_psycho.c | 4 ++-- arch/sparc64/kernel/pci_sun4v.c | 2 +- drivers/sbus/char/bbc_i2c.c | 6 +++--- sound/sparc/cs4231.c | 10 +++++----- 5 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/sparc64/kernel/pci_fire.c b/arch/sparc64/kernel/pci_fire.c index 9462b68f4894..fcbbac66e141 100644 --- a/arch/sparc64/kernel/pci_fire.c +++ b/arch/sparc64/kernel/pci_fire.c @@ -455,7 +455,7 @@ static int __init pci_fire_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __devinit fire_probe(struct of_device *op, +static int __init fire_probe(struct of_device *op, const struct of_device_id *match) { struct device_node *dp = op->node; diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index dfb3ec892987..56605adbb5b3 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -493,7 +493,7 @@ static void __init psycho_pbm_init(struct pci_pbm_info *pbm, psycho_scan_bus(pbm, &op->dev); } -static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid) +static struct pci_pbm_info * __init psycho_find_sibling(u32 upa_portid) { struct pci_pbm_info *pbm; @@ -506,7 +506,7 @@ static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid) #define PSYCHO_CONFIGSPACE 0x001000000UL -static int __devinit psycho_probe(struct of_device *op, +static int __init psycho_probe(struct of_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *pr_regs; diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 34a1fded3941..4b27b0e10ce7 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -929,7 +929,7 @@ static int __init pci_sun4v_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __devinit pci_sun4v_probe(struct of_device *op, +static int __init pci_sun4v_probe(struct of_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *regs; diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c index f08e169ba1b5..054f5dd58931 100644 --- a/drivers/sbus/char/bbc_i2c.c +++ b/drivers/sbus/char/bbc_i2c.c @@ -361,7 +361,7 @@ fail: extern int bbc_envctrl_init(struct bbc_i2c_bus *bp); extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp); -static int __devinit bbc_i2c_probe(struct of_device *op, +static int __init bbc_i2c_probe(struct of_device *op, const struct of_device_id *match) { struct bbc_i2c_bus *bp; @@ -386,7 +386,7 @@ static int __devinit bbc_i2c_probe(struct of_device *op, return err; } -static int __devexit bbc_i2c_remove(struct of_device *op) +static int __exit bbc_i2c_remove(struct of_device *op) { struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev); @@ -417,7 +417,7 @@ static struct of_platform_driver bbc_i2c_driver = { .name = "bbc_i2c", .match_table = bbc_i2c_match, .probe = bbc_i2c_probe, - .remove = __devexit_p(bbc_i2c_remove), + .remove = __exit_p(bbc_i2c_remove), }; static int __init bbc_i2c_init(void) diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c index d44bf98e965e..6c427bbac326 100644 --- a/sound/sparc/cs4231.c +++ b/sound/sparc/cs4231.c @@ -1856,7 +1856,7 @@ static int __init snd_cs4231_sbus_create(struct snd_card *card, return 0; } -static int __devinit cs4231_sbus_probe(struct of_device *op, const struct of_device_id *match) +static int __init cs4231_sbus_probe(struct of_device *op, const struct of_device_id *match) { struct resource *rp = &op->resource[0]; struct snd_card *card; @@ -2048,7 +2048,7 @@ static int __init snd_cs4231_ebus_create(struct snd_card *card, return 0; } -static int __devinit cs4231_ebus_probe(struct of_device *op, const struct of_device_id *match) +static int __init cs4231_ebus_probe(struct of_device *op, const struct of_device_id *match) { struct snd_card *card; int err; @@ -2072,7 +2072,7 @@ static int __devinit cs4231_ebus_probe(struct of_device *op, const struct of_dev } #endif -static int __devinit cs4231_probe(struct of_device *op, const struct of_device_id *match) +static int __init cs4231_probe(struct of_device *op, const struct of_device_id *match) { #ifdef EBUS_SUPPORT if (!strcmp(op->node->parent->name, "ebus")) @@ -2086,7 +2086,7 @@ static int __devinit cs4231_probe(struct of_device *op, const struct of_device_i return -ENODEV; } -static int __devexit cs4231_remove(struct of_device *op) +static int __exit cs4231_remove(struct of_device *op) { struct snd_cs4231 *chip = dev_get_drvdata(&op->dev); @@ -2112,7 +2112,7 @@ static struct of_platform_driver cs4231_driver = { .name = "audio", .match_table = cs4231_match, .probe = cs4231_probe, - .remove = __devexit_p(cs4231_remove), + .remove = __exit_p(cs4231_remove), }; static int __init cs4231_init(void) -- cgit v1.2.3 From ced7172ad94713f9023a3c279082402ac7750ba8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:35:14 +0000 Subject: gdth section fixes PCI side of driver should be devinit, not init Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/scsi/gdth.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index c387c15a2128..fb247fdfa2bd 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -588,7 +588,7 @@ static struct pci_driver gdth_pci_driver = { .remove = gdth_pci_remove_one, }; -static void gdth_pci_remove_one(struct pci_dev *pdev) +static void __devexit gdth_pci_remove_one(struct pci_dev *pdev) { gdth_ha_str *ha = pci_get_drvdata(pdev); @@ -600,7 +600,7 @@ static void gdth_pci_remove_one(struct pci_dev *pdev) pci_disable_device(pdev); } -static int gdth_pci_init_one(struct pci_dev *pdev, +static int __devinit gdth_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { ushort vendor = pdev->vendor; @@ -853,7 +853,7 @@ static int __init gdth_init_isa(ulong32 bios_adr,gdth_ha_str *ha) #endif /* CONFIG_ISA */ #ifdef CONFIG_PCI -static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr, +static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr, gdth_ha_str *ha) { register gdt6_dpram_str __iomem *dp6_ptr; @@ -1237,7 +1237,7 @@ static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr, /* controller protocol functions */ -static void __init gdth_enable_int(gdth_ha_str *ha) +static void __devinit gdth_enable_int(gdth_ha_str *ha) { ulong flags; gdt2_dpram_str __iomem *dp2_ptr; @@ -1553,7 +1553,7 @@ static int gdth_internal_cmd(gdth_ha_str *ha, unchar service, ushort opcode, /* search for devices */ -static int __init gdth_search_drives(gdth_ha_str *ha) +static int __devinit gdth_search_drives(gdth_ha_str *ha) { ushort cdev_cnt, i; int ok; @@ -4935,7 +4935,7 @@ static int __init gdth_eisa_probe_one(ushort eisa_slot) #endif /* CONFIG_EISA */ #ifdef CONFIG_PCI -static int gdth_pci_probe_one(gdth_pci_str *pcistr, +static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr, gdth_ha_str **ha_out) { struct Scsi_Host *shp; -- cgit v1.2.3 From 31421a6f6ea88236cb17b6a24aa21e66a6138d4c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:35:24 +0000 Subject: rackmeter section fixes * rackmeter_remove() reference needs devexit_p * rackmeter_setup() is calls devinit and is called only from devinit Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/macintosh/rack-meter.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c index 2c21d4f25cc8..a98ab72adf95 100644 --- a/drivers/macintosh/rack-meter.c +++ b/drivers/macintosh/rack-meter.c @@ -288,7 +288,7 @@ static void __devexit rackmeter_stop_cpu_sniffer(struct rackmeter *rm) cancel_rearming_delayed_work(&rm->cpu[1].sniffer); } -static int rackmeter_setup(struct rackmeter *rm) +static int __devinit rackmeter_setup(struct rackmeter *rm) { pr_debug("rackmeter: setting up i2s..\n"); rackmeter_setup_i2s(rm); @@ -582,12 +582,12 @@ static struct of_device_id rackmeter_match[] = { { } }; -static struct macio_driver rackmeter_drv = { +static struct macio_driver rackmeter_driver = { .name = "rackmeter", .owner = THIS_MODULE, .match_table = rackmeter_match, .probe = rackmeter_probe, - .remove = rackmeter_remove, + .remove = __devexit_p(rackmeter_remove), .shutdown = rackmeter_shutdown, }; @@ -596,14 +596,14 @@ static int __init rackmeter_init(void) { pr_debug("rackmeter_init()\n"); - return macio_register_driver(&rackmeter_drv); + return macio_register_driver(&rackmeter_driver); } static void __exit rackmeter_exit(void) { pr_debug("rackmeter_exit()\n"); - macio_unregister_driver(&rackmeter_drv); + macio_unregister_driver(&rackmeter_driver); } module_init(rackmeter_init); -- cgit v1.2.3 From 43ced651d1272ced02ed5f1c2abc79e3354187f6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:35:34 +0000 Subject: ixgbe section fixes ixgbe_init_interrupt_scheme() is called from ixgbe_resume(). Build that with CONFIG_PM and without CONFIG_HOTPLUG and you've got a problem. Several helpers called by it also are misannotated __devinit. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/ixgbe/ixgbe_main.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 36f2bb666bf7..8ed823ae639e 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2330,7 +2330,7 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, * Once we know the feature-set enabled for the device, we'll cache * the register offset the descriptor ring is assigned to. **/ -static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) +static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) { int feature_mask = 0, rss_i; int i, txr_idx, rxr_idx; @@ -2367,7 +2367,7 @@ static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) * number of queues at compile-time. The polling_netdev array is * intended for Multiqueue, but should work fine with a single queue. **/ -static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter) +static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter) { int i; @@ -2408,8 +2408,7 @@ err_tx_ring_allocation: * Attempt to configure the interrupts using the best available * capabilities of the hardware and the kernel. **/ -static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter - *adapter) +static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter) { int err = 0; int vector, v_budget; @@ -2501,7 +2500,7 @@ static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter) * - Hardware queue count (num_*_queues) * - defined by miscellaneous hardware support/features (RSS, etc.) **/ -static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) +static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) { int err; -- cgit v1.2.3 From 8814b5050d183f00a25a087b550841797c0c2775 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:35:44 +0000 Subject: section misannotation in ibmtr_cs ibmtr_resume() is calling ibmtr_probe(), which is devinit. Whether that's the right thing to do there is a separate question, but since it's PCMCIA and thus will never compile without HOTPLUG... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/pcmcia/ibmtr_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index cf3cca4642f2..f51944b28cfa 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -349,7 +349,7 @@ static int ibmtr_suspend(struct pcmcia_device *link) return 0; } -static int ibmtr_resume(struct pcmcia_device *link) +static int __devinit ibmtr_resume(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; struct net_device *dev = info->dev; -- cgit v1.2.3 From 1c4567aeed84a2746d78d4c1fe092222a559d43f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:35:54 +0000 Subject: m32r: section noise in head.S usual "introduce .text.head, put it in front of TEXT_TEXT in vmlinux.lds.S, make the stuff up to jump to start_kernel live in it", same as on other targets. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/m32r/kernel/head.S | 4 ++-- arch/m32r/kernel/vmlinux.lds.S | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S index 40180778a5c7..90916067b9c1 100644 --- a/arch/m32r/kernel/head.S +++ b/arch/m32r/kernel/head.S @@ -23,7 +23,7 @@ __INITDATA /* * References to members of the boot_cpu_data structure. */ - .text +.section .text.head, "ax" .global start_kernel .global __bss_start .global _end @@ -133,7 +133,6 @@ loop1: /* * AP startup routine */ - .text .global eit_vector ENTRY(startup_AP) ;; setup EVB @@ -230,6 +229,7 @@ ENTRY(startup_AP) nop #endif /* CONFIG_SMP */ + .text ENTRY(stack_start) .long init_thread_union+8192 .long __KERNEL_DS diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 15a6f36c06db..9db05df20c0e 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -27,6 +27,7 @@ SECTIONS _text = .; /* Text and read-only data */ .boot : { *(.boot) } = 0 .text : { + *(.text.head) TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.3 From 5bac287ea51bb8678c3875d87a536071ef0fd590 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:36:04 +0000 Subject: fix the section noise in sparc head.S usual .text.head trick Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc/kernel/head.S | 2 +- arch/sparc/kernel/vmlinux.lds.S | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S index 2d325fd84579..51b40426f9c6 100644 --- a/arch/sparc/kernel/head.S +++ b/arch/sparc/kernel/head.S @@ -72,7 +72,7 @@ sun4e_notsup: .align 4 /* The Sparc trap table, bootloader gives us control at _start. */ - .text + .section .text.head,"ax" .globl start, _stext, _start, __stext .globl trapbase _start: /* danger danger */ diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index b1002c607196..5b7e69a8c32f 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -13,6 +13,7 @@ SECTIONS .text 0xf0004000 : { _text = .; + *(.text.head) TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.3 From f57628d76bd201a444ca822f3622522a44acbf60 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:36:14 +0000 Subject: section errors in smc911x/smc91x a) ->probe() can be __devinit; no need to put it into .text b) calling __init stuff from it, OTOH, is wrong c) ->remove() is __devexit fodder Acked-by: rmk+kernel@arm.linux.org.uk Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/smc911x.c | 10 +++++----- drivers/net/smc91x.c | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index b185cd12269c..9a16a79b67d0 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -1735,7 +1735,7 @@ static const struct ethtool_ops smc911x_ethtool_ops = { * This routine has a simple purpose -- make the SMC chip generate an * interrupt, so an auto-detect routine can detect it, and find the IRQ, */ -static int __init smc911x_findirq(struct net_device *dev) +static int __devinit smc911x_findirq(struct net_device *dev) { struct smc911x_local *lp = netdev_priv(dev); int timeout = 20; @@ -1799,7 +1799,7 @@ static int __init smc911x_findirq(struct net_device *dev) * o actually GRAB the irq. * o GRAB the region */ -static int __init smc911x_probe(struct net_device *dev) +static int __devinit smc911x_probe(struct net_device *dev) { struct smc911x_local *lp = netdev_priv(dev); int i, retval; @@ -2048,7 +2048,7 @@ err_out: * 0 --> there is a device * anything else, error */ -static int smc911x_drv_probe(struct platform_device *pdev) +static int __devinit smc911x_drv_probe(struct platform_device *pdev) { #ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; @@ -2124,7 +2124,7 @@ out: return ret; } -static int smc911x_drv_remove(struct platform_device *pdev) +static int __devexit smc911x_drv_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct smc911x_local *lp = netdev_priv(ndev); @@ -2195,7 +2195,7 @@ static int smc911x_drv_resume(struct platform_device *dev) static struct platform_driver smc911x_driver = { .probe = smc911x_drv_probe, - .remove = smc911x_drv_remove, + .remove = __devexit_p(smc911x_drv_remove), .suspend = smc911x_drv_suspend, .resume = smc911x_drv_resume, .driver = { diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index fc80f250da31..35c56abf4113 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1696,7 +1696,7 @@ static const struct ethtool_ops smc_ethtool_ops = { * I just deleted auto_irq.c, since it was never built... * --jgarzik */ -static int __init smc_findirq(struct smc_local *lp) +static int __devinit smc_findirq(struct smc_local *lp) { void __iomem *ioaddr = lp->base; int timeout = 20; @@ -1770,7 +1770,7 @@ static int __init smc_findirq(struct smc_local *lp) * o actually GRAB the irq. * o GRAB the region */ -static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, +static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr, unsigned long irq_flags) { struct smc_local *lp = netdev_priv(dev); @@ -2126,7 +2126,7 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * * 0 --> there is a device * anything else, error */ -static int smc_drv_probe(struct platform_device *pdev) +static int __devinit smc_drv_probe(struct platform_device *pdev) { struct smc91x_platdata *pd = pdev->dev.platform_data; struct smc_local *lp; @@ -2240,7 +2240,7 @@ static int smc_drv_probe(struct platform_device *pdev) return ret; } -static int smc_drv_remove(struct platform_device *pdev) +static int __devexit smc_drv_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct smc_local *lp = netdev_priv(ndev); @@ -2305,7 +2305,7 @@ static int smc_drv_resume(struct platform_device *dev) static struct platform_driver smc_driver = { .probe = smc_drv_probe, - .remove = smc_drv_remove, + .remove = __devexit_p(smc_drv_remove), .suspend = smc_drv_suspend, .resume = smc_drv_resume, .driver = { -- cgit v1.2.3 From 37d33d151428a4ee648c855c0b49368de7804e7f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:36:24 +0000 Subject: rapidio section noise functions calling devinit and called only from devinit Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/rapidio/rio-scan.c | 4 ++-- drivers/rapidio/rio.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index a926c896475e..643a6b98462b 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -879,7 +879,7 @@ static void rio_update_route_tables(struct rio_mport *port) * link, then start recursive peer enumeration. Returns %0 if * enumeration succeeds or %-EBUSY if enumeration fails. */ -int rio_enum_mport(struct rio_mport *mport) +int __devinit rio_enum_mport(struct rio_mport *mport) { struct rio_net *net = NULL; int rc = 0; @@ -972,7 +972,7 @@ static void rio_enum_timeout(unsigned long data) * peer discovery. Returns %0 if discovery succeeds or %-EBUSY * on failure. */ -int rio_disc_mport(struct rio_mport *mport) +int __devinit rio_disc_mport(struct rio_mport *mport) { struct rio_net *net = NULL; int enum_timeout_flag = 0; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 680661abbc4b..6395c780008b 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -467,7 +467,7 @@ static int __devinit rio_init(void) device_initcall(rio_init); -int rio_init_mports(void) +int __devinit rio_init_mports(void) { int rc = 0; struct rio_mport *port; -- cgit v1.2.3 From b0385146bcdd24b0390c2b60fd05a083888835db Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:36:34 +0000 Subject: uninorth-agp section mess 'aperture' is declared devinitdata (the whole word of it) and is used from ->fetch_size() which can, AFAICS, be used on !HOTPLUG after init time. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/char/agp/uninorth-agp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 0f004b65ec03..03f95ec08f59 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -27,7 +27,7 @@ static int uninorth_rev; static int is_u3; -static char __devinitdata *aperture = NULL; +static char *aperture = NULL; static int uninorth_fetch_size(void) { -- cgit v1.2.3 From 8419641450edc838a6ce7cdf0f99d262bf0af2d5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:36:44 +0000 Subject: cpuinit fixes in kernel/* Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- kernel/cpu.c | 2 +- kernel/profile.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/cpu.c b/kernel/cpu.c index 5a732c5ef08b..8ea32e8d68b0 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -462,7 +462,7 @@ out: * It must be called by the arch code on the new cpu, before the new cpu * enables interrupts and before the "boot" cpu returns from __cpu_up(). */ -void notify_cpu_starting(unsigned int cpu) +void __cpuinit notify_cpu_starting(unsigned int cpu) { unsigned long val = CPU_STARTING; diff --git a/kernel/profile.c b/kernel/profile.c index 5b7d1ac7124c..dc41827fbfee 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -351,7 +351,7 @@ out: put_cpu(); } -static int __devinit profile_cpu_callback(struct notifier_block *info, +static int __cpuinit profile_cpu_callback(struct notifier_block *info, unsigned long action, void *__cpu) { int node, cpu = (unsigned long)__cpu; @@ -596,7 +596,7 @@ out_cleanup: #define create_hash_tables() ({ 0; }) #endif -int create_proc_profile(void) +int __ref create_proc_profile(void) /* false positive from hotcpu_notifier */ { struct proc_dir_entry *entry; -- cgit v1.2.3 From 56d74dd5f7ad8b6b0979ce915d51cf03bcc57267 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:36:54 +0000 Subject: tricky one: hisax sections a) hisax_init_pcmcia() needs to be defined only if we have CONFIG_HOTPLUG (no PCMCIA support otherwise) and can be declared __devinit. b) HiSax_inithardware() can go __init c) hisax_register() is passing to checkcard() full-blown hisax_cs_setup_card(): checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card); The problem with it is that * hisax_cs_setup_card() is __devinit * hisax_register() is not * hisax_cs_setup_card() is a switch from hell, calling a lot of setup_some_weirdcard() depending on card->typ. _These_ are also __devinit. However, in hisax_register() we have card->typ equal to ISDN_CTYPE_DYNAMIC, which reduces hisax_cs_setup_card() to "nevermind all that crap, just do nothing and return 2". So we add a trimmed-down callback doing just that and passed to checkcard() by hisax_register(). _This_ is non-init (we can stand the impact on .text size). Voila - no section warnings from drivers/isdn Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/isdn/hisax/config.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c index 84d75a3f5d17..ded9d0baf607 100644 --- a/drivers/isdn/hisax/config.c +++ b/drivers/isdn/hisax/config.c @@ -1213,7 +1213,7 @@ static void HiSax_shiftcards(int idx) memcpy(&cards[i], &cards[i + 1], sizeof(cards[i])); } -static int HiSax_inithardware(int *busy_flag) +static int __init HiSax_inithardware(int *busy_flag) { int foundcards = 0; int i = 0; @@ -1542,7 +1542,9 @@ static void __exit HiSax_exit(void) printk(KERN_INFO "HiSax module removed\n"); } -int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card) +#ifdef CONFIG_HOTPLUG + +int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card) { u_char ids[16]; int ret = -1; @@ -1563,6 +1565,8 @@ error: } EXPORT_SYMBOL(hisax_init_pcmcia); +#endif + EXPORT_SYMBOL(HiSax_closecard); #include "hisax_if.h" @@ -1580,6 +1584,11 @@ static void hisax_bc_close(struct BCState *bcs); static void hisax_bh(struct work_struct *work); static void EChannel_proc_rcv(struct hisax_d_if *d_if); +static int hisax_setup_card_dynamic(struct IsdnCard *card) +{ + return 2; +} + int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[], char *name, int protocol) { @@ -1599,7 +1608,8 @@ int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[], cards[i].protocol = protocol; sprintf(id, "%s%d", name, i); nrcards++; - retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card); + retval = checkcard(i, id, NULL, hisax_d_if->owner, + hisax_setup_card_dynamic); if (retval == 0) { // yuck cards[i].typ = 0; nrcards--; -- cgit v1.2.3 From 4bcc17dd8e48b612d43a9b0a6faa9eaa358fa4bd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:37:04 +0000 Subject: alpha: pcibios_resource_to_bus() is callable from normal code pci_enable_rom(), specifically. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/alpha/kernel/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 5cf45fc51343..ff8cb638472e 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -338,7 +338,7 @@ common_swizzle(struct pci_dev *dev, u8 *pinp) return PCI_SLOT(dev->devfn); } -void __devinit +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res) { -- cgit v1.2.3 From ad04d31e5fb6b25308e6cdea6baa07d41871a3e0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:37:14 +0000 Subject: pci_setup() is init, not devinit for fsck sake, it's used only when parsing kernel command line... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/pci/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 28af496b441e..061d1ee0046a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2042,7 +2042,7 @@ static int __devinit pci_init(void) return 0; } -static int __devinit pci_setup(char *str) +static int __init pci_setup(char *str) { while (str) { char *k = strchr(str, ','); -- cgit v1.2.3 From 2236d252e001ea57d53cec1954f680e503f3b8bc Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:37:34 +0000 Subject: enable_IR_x2apic() needs to be __init calls __init, called only from __init Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/kernel/apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c index 04a7f960bbc0..16f94879b525 100644 --- a/arch/x86/kernel/apic.c +++ b/arch/x86/kernel/apic.c @@ -1315,7 +1315,7 @@ void enable_x2apic(void) } } -void enable_IR_x2apic(void) +void __init enable_IR_x2apic(void) { #ifdef CONFIG_INTR_REMAP int ret; -- cgit v1.2.3 From 23a14b9e9db49ed5f7683857557c26c874d4abb6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:37:44 +0000 Subject: kvm_setup_secondary_clock() is cpuinit Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/kernel/kvmclock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 1c9cc431ea4f..e169ae9b6a62 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -128,7 +128,7 @@ static int kvm_register_clock(char *txt) } #ifdef CONFIG_X86_LOCAL_APIC -static void __devinit kvm_setup_secondary_clock(void) +static void __cpuinit kvm_setup_secondary_clock(void) { /* * Now that the first cpu already had this clocksource initialized, -- cgit v1.2.3 From 37af46efa5413c6f4c25d9a24b4c43f2cc718eed Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:37:54 +0000 Subject: xen_setup_vcpu_info_placement() is not init on x86 ... so get xen-ops.h in agreement with xen/smp.c Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/xen/xen-ops.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index d7422dc2a55c..9e1afae8461f 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -49,7 +49,7 @@ bool xen_vcpu_stolen(int vcpu); void xen_mark_init_mm_pinned(void); -void __init xen_setup_vcpu_info_placement(void); +void xen_setup_vcpu_info_placement(void); #ifdef CONFIG_SMP void xen_smp_init(void); -- cgit v1.2.3 From df6b07949b6cab9d119363d02ef63379160f6c82 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:38:04 +0000 Subject: xen_play_dead() is __cpuinit Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/xen/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index d77da613b1d2..acd9b6705e02 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -362,7 +362,7 @@ static void xen_cpu_die(unsigned int cpu) alternatives_smp_switch(0); } -static void xen_play_dead(void) +static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */ { play_dead_common(); HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); -- cgit v1.2.3 From ffb78a26169351f6c22cdae481b057d50d5d759b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:38:14 +0000 Subject: get xenbus_driver ->probe() "recognized" by modpost ... by giving the instances' names magic suffix recognized by modpost ;-/ Their ->probe() is __devinit Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/input/xen-kbdfront.c | 6 +++--- drivers/net/xen-netfront.c | 6 +++--- drivers/video/xen-fbfront.c | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index 3ab6362f043c..928d2ed8865f 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -323,7 +323,7 @@ static struct xenbus_device_id xenkbd_ids[] = { { "" } }; -static struct xenbus_driver xenkbd = { +static struct xenbus_driver xenkbd_driver = { .name = "vkbd", .owner = THIS_MODULE, .ids = xenkbd_ids, @@ -342,12 +342,12 @@ static int __init xenkbd_init(void) if (xen_initial_domain()) return -ENODEV; - return xenbus_register_frontend(&xenkbd); + return xenbus_register_frontend(&xenkbd_driver); } static void __exit xenkbd_cleanup(void) { - xenbus_unregister_driver(&xenkbd); + xenbus_unregister_driver(&xenkbd_driver); } module_init(xenkbd_init); diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index c6948d8f53f6..6d017adc914a 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1785,7 +1785,7 @@ static int __devexit xennet_remove(struct xenbus_device *dev) return 0; } -static struct xenbus_driver netfront = { +static struct xenbus_driver netfront_driver = { .name = "vif", .owner = THIS_MODULE, .ids = netfront_ids, @@ -1805,7 +1805,7 @@ static int __init netif_init(void) printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n"); - return xenbus_register_frontend(&netfront); + return xenbus_register_frontend(&netfront_driver); } module_init(netif_init); @@ -1815,7 +1815,7 @@ static void __exit netif_exit(void) if (xen_initial_domain()) return; - xenbus_unregister_driver(&netfront); + xenbus_unregister_driver(&netfront_driver); } module_exit(netif_exit); diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index a463b3dd837b..2493f05e9f61 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -668,7 +668,7 @@ static struct xenbus_device_id xenfb_ids[] = { { "" } }; -static struct xenbus_driver xenfb = { +static struct xenbus_driver xenfb_driver = { .name = "vfb", .owner = THIS_MODULE, .ids = xenfb_ids, @@ -687,12 +687,12 @@ static int __init xenfb_init(void) if (xen_initial_domain()) return -ENODEV; - return xenbus_register_frontend(&xenfb); + return xenbus_register_frontend(&xenfb_driver); } static void __exit xenfb_cleanup(void) { - xenbus_unregister_driver(&xenfb); + xenbus_unregister_driver(&xenfb_driver); } module_init(xenfb_init); -- cgit v1.2.3 From d3a307f32ec3554739033762672e533e2d246dae Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:38:24 +0000 Subject: sn_pci_controller_fixup() should be __init called only from __init Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/ia64/sn/kernel/io_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index c3aa851d1ca6..4e1801bad83a 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -292,7 +292,7 @@ EXPORT_SYMBOL(sn_io_slot_fixup); * sn_pci_controller_fixup() - This routine sets up a bus's resources * consistent with the Linux PCI abstraction layer. */ -static void +static void __init sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) { s64 status = 0; -- cgit v1.2.3 From 02d0e6753d8ab0173b63338157929e52eac86d12 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:38:34 +0000 Subject: hotplug_memory_notifier section annotation Same as for hotplug_cpu - we want static notifier_block in there in meminitdata, to avoid false positives whenever it's used. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/linux/memory.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/memory.h b/include/linux/memory.h index 2f5f8a5ef2a0..36c82c9e6ea7 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -91,7 +91,7 @@ extern int memory_notify(unsigned long val, void *v); #ifdef CONFIG_MEMORY_HOTPLUG #define hotplug_memory_notifier(fn, pri) { \ - static struct notifier_block fn##_mem_nb = \ + static __meminitdata struct notifier_block fn##_mem_nb =\ { .notifier_call = fn, .priority = pri }; \ register_memory_notifier(&fn##_mem_nb); \ } -- cgit v1.2.3 From 211f05a034f49586fdd071abd174853217ec29ee Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 23 Nov 2008 16:57:36 -0800 Subject: input: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playback ml_ff_playback() uses spin_(un)lock_bh. However this function is called with interrupts disabled from erase_effect() in drivers/input/ff-core.c:196. This is not permitted, and will result in a WARN_ON in the bottom half handling code. This patch changes this function to just use spin_lock_irqsave() instead, solving the problem and simplifying the locking logic. This was reported as entry #106559 in kerneloops.org Reported-by: kerneloops.org Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- drivers/input/ff-memless.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index 6790e975a98c..bc4e40f3ede7 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -397,8 +397,9 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) { struct ml_device *ml = dev->ff->private; struct ml_effect_state *state = &ml->states[effect_id]; + unsigned long flags; - spin_lock_bh(&ml->timer_lock); + spin_lock_irqsave(&ml->timer_lock, flags); if (value > 0) { debug("initiated play"); @@ -424,7 +425,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) ml_play_effects(ml); } - spin_unlock_bh(&ml->timer_lock); + spin_unlock_irqrestore(&ml->timer_lock, flags); return 0; } -- cgit v1.2.3 From 96b8936a9ed08746e47081458a5eb9e43a751e24 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 25 Nov 2008 08:10:03 +0100 Subject: remove __ARCH_WANT_COMPAT_SYS_PTRACE All architectures now use the generic compat_sys_ptrace, as should every new architecture that needs 32bit compat (if we'll ever get another). Remove the now superflous __ARCH_WANT_COMPAT_SYS_PTRACE define, and also kill a comment about __ARCH_SYS_PTRACE that was added after __ARCH_SYS_PTRACE was already gone. Signed-off-by: Christoph Hellwig Acked-by: David S. Miller Signed-off-by: Linus Torvalds --- arch/Kconfig | 2 -- arch/ia64/include/asm/ptrace.h | 2 -- arch/mips/include/asm/ptrace.h | 4 ---- arch/parisc/include/asm/ptrace.h | 2 -- arch/powerpc/include/asm/ptrace.h | 2 -- arch/s390/include/asm/ptrace.h | 2 -- arch/sparc/include/asm/ptrace_64.h | 2 -- arch/x86/include/asm/ptrace.h | 2 -- include/linux/compat.h | 2 -- kernel/ptrace.c | 4 ++-- 10 files changed, 2 insertions(+), 22 deletions(-) diff --git a/arch/Kconfig b/arch/Kconfig index 8977d99987cb..471e72dbaf8b 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -79,8 +79,6 @@ config HAVE_KRETPROBES # task_pt_regs() in asm/processor.h or asm/ptrace.h # arch_has_single_step() if there is hardware single-step support # arch_has_block_step() if there is hardware block-step support -# arch_ptrace() and not #define __ARCH_SYS_PTRACE -# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE # asm/syscall.h supplying asm-generic/syscall.h interface # linux/regset.h user_regset interfaces # CORE_DUMP_USE_REGSET #define'd in linux/elf.h diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h index 6417c1ecb44e..14055c636adf 100644 --- a/arch/ia64/include/asm/ptrace.h +++ b/arch/ia64/include/asm/ptrace.h @@ -325,8 +325,6 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs) #define arch_has_block_step() (1) extern void user_enable_block_step(struct task_struct *); -#define __ARCH_WANT_COMPAT_SYS_PTRACE - #endif /* !__KERNEL__ */ /* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */ diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 813abd16255d..c2c8bac43307 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -9,10 +9,6 @@ #ifndef _ASM_PTRACE_H #define _ASM_PTRACE_H -#ifdef CONFIG_64BIT -#define __ARCH_WANT_COMPAT_SYS_PTRACE -#endif - /* 0 - 31 are integer registers, 32 - 63 are fp registers. */ #define FPR_BASE 32 #define PC 64 diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h index afa5333187b4..302f68dc889c 100644 --- a/arch/parisc/include/asm/ptrace.h +++ b/arch/parisc/include/asm/ptrace.h @@ -47,8 +47,6 @@ struct pt_regs { #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS)) -#define __ARCH_WANT_COMPAT_SYS_PTRACE - struct task_struct; #define arch_has_single_step() 1 void user_disable_single_step(struct task_struct *task); diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index 280a90cc9894..c9c678fb2538 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -55,8 +55,6 @@ struct pt_regs { #ifdef __powerpc64__ -#define __ARCH_WANT_COMPAT_SYS_PTRACE - #define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ #define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ #define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index a7226f8143fb..560ce8561dfd 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -486,8 +486,6 @@ struct task_struct; extern void user_enable_single_step(struct task_struct *); extern void user_disable_single_step(struct task_struct *); -#define __ARCH_WANT_COMPAT_SYS_PTRACE - #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0) #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN) #define user_stack_pointer(regs)((regs)->gprs[15]) diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h index 3d3e9c161d8b..84e969f06afe 100644 --- a/arch/sparc/include/asm/ptrace_64.h +++ b/arch/sparc/include/asm/ptrace_64.h @@ -142,8 +142,6 @@ struct global_reg_snapshot { }; extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; -#define __ARCH_WANT_COMPAT_SYS_PTRACE - #define force_successful_syscall_return() \ do { current_thread_info()->syscall_noerror = 1; \ } while (0) diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index d1531c8480b7..eefb0594b058 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -271,8 +271,6 @@ extern int do_get_thread_area(struct task_struct *p, int idx, extern int do_set_thread_area(struct task_struct *p, int idx, struct user_desc __user *info, int can_allocate); -#define __ARCH_WANT_COMPAT_SYS_PTRACE - #endif /* __KERNEL__ */ #endif /* !__ASSEMBLY__ */ diff --git a/include/linux/compat.h b/include/linux/compat.h index f061a1ea1b74..e88f3ecf38b4 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -252,12 +252,10 @@ extern int compat_ptrace_request(struct task_struct *child, compat_long_t request, compat_ulong_t addr, compat_ulong_t data); -#ifdef __ARCH_WANT_COMPAT_SYS_PTRACE extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request, compat_ulong_t addr, compat_ulong_t data); asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid, compat_long_t addr, compat_long_t data); -#endif /* __ARCH_WANT_COMPAT_SYS_PTRACE */ /* * epoll (fs/eventpoll.c) compat bits follow ... diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 1e68e4c39e2c..4c8bcd7dd8e0 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -612,7 +612,7 @@ int generic_ptrace_pokedata(struct task_struct *tsk, long addr, long data) return (copied == sizeof(data)) ? 0 : -EIO; } -#if defined CONFIG_COMPAT && defined __ARCH_WANT_COMPAT_SYS_PTRACE +#if defined CONFIG_COMPAT #include int compat_ptrace_request(struct task_struct *child, compat_long_t request, @@ -709,4 +709,4 @@ asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid, unlock_kernel(); return ret; } -#endif /* CONFIG_COMPAT && __ARCH_WANT_COMPAT_SYS_PTRACE */ +#endif /* CONFIG_COMPAT */ -- cgit v1.2.3 From 499c59c42967329d39481314a839d7669f5e1506 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Fri, 28 Nov 2008 11:48:37 +0000 Subject: MN10300: Tighten up the code using case ranges Compress a set of consecutive switch cases into a case-range. Signed-off-by: Robert P. J. Day Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/gdb-stub.c | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-) diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index 54be6afb5555..0ea7482c1522 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -522,17 +522,7 @@ static int gdbstub_single_step(struct pt_regs *regs) } else { switch (cur) { /* Bxx (d8,PC) */ - case 0xc0: - case 0xc1: - case 0xc2: - case 0xc3: - case 0xc4: - case 0xc5: - case 0xc6: - case 0xc7: - case 0xc8: - case 0xc9: - case 0xca: + case 0xc0 ... 0xca: if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0) goto fault; if (!__gdbstub_mark_bp(pc + 2, 0)) @@ -543,17 +533,7 @@ static int gdbstub_single_step(struct pt_regs *regs) break; /* LXX (d8,PC) */ - case 0xd0: - case 0xd1: - case 0xd2: - case 0xd3: - case 0xd4: - case 0xd5: - case 0xd6: - case 0xd7: - case 0xd8: - case 0xd9: - case 0xda: + case 0xd0 ... 0xda: if (!__gdbstub_mark_bp(pc + 1, 0)) goto fault; if (regs->pc != regs->lar && -- cgit v1.2.3 From 1838e39214ee3e390f9c8150ea7454103b72ef83 Mon Sep 17 00:00:00 2001 From: frans Date: Sat, 22 Nov 2008 15:39:06 +0100 Subject: Trivial Documentation/filesystems/ramfs-rootfs-initramfs.txt fix A very minor patch on ramfs-rootfs-initramfs.txt: update the location where CONFIG_INITRAMFS_SOURCE lives in menuconfig Signed-off-by: Frans Meulenbroeks Acked-by: Rob Landley Signed-off-by: Linus Torvalds --- Documentation/filesystems/ramfs-rootfs-initramfs.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt index 62fe9b1e0890..a8273d5fad20 100644 --- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt +++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt @@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs archive and links it into the resulting kernel binary. By default, this archive is empty (consuming 134 bytes on x86). -The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under -devices->block devices in menuconfig, and living in usr/Kconfig) can be used -to specify a source for the initramfs archive, which will automatically be -incorporated into the resulting binary. This option can point to an existing -gzipped cpio archive, a directory containing files to be archived, or a text -file specification such as the following example: +The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig, +and living in usr/Kconfig) can be used to specify a source for the +initramfs archive, which will automatically be incorporated into the +resulting binary. This option can point to an existing gzipped cpio +archive, a directory containing files to be archived, or a text file +specification such as the following example: dir /dev 755 0 0 nod /dev/console 644 0 0 c 5 1 -- cgit v1.2.3 From 4b824de9b18b8d1013e9fc9e4b0f855ced8cac2c Mon Sep 17 00:00:00 2001 From: Adhemerval Zanella Date: Wed, 19 Nov 2008 03:55:35 +0000 Subject: powerpc: Fix IRQ assignment for some PCIe devices Currently, some PCIe devices on POWER6 machines do not get interrupts assigned correctly. The problem is that OF doesn't create an "interrupt" property for them. The fix is for of_irq_map_pci to fall back to using the value in the PCI interrupt-pin register in config space, as we do when there is no OF device-tree node for the device. I have verified that this works fine with a pair of Squib-E SAS adapter on a P6-570. Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_parse.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index bc1fb27368af..a11d68976dc8 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -250,8 +250,11 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) * parsing */ dn = pci_device_to_OF_node(pdev); - if (dn) - return of_irq_map_one(dn, 0, out_irq); + if (dn) { + rc = of_irq_map_one(dn, 0, out_irq); + if (!rc) + return rc; + } /* Ok, we don't, time to have fun. Let's start by building up an * interrupt spec. we assume #interrupt-cells is 1, which is standard -- cgit v1.2.3 From 4a6186696e7f15b3ea4dafcdb64ee0703e0e4487 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Mon, 24 Nov 2008 12:02:35 +0000 Subject: powerpc: Fix boot freeze on machine with empty memory node I got a bug report about a distro kernel not booting on a particular machine. It would freeze during boot: > ... > Could not find start_pfn for node 1 > [boot]0015 Setup Done > Built 2 zonelists in Node order, mobility grouping on. Total pages: 123783 > Policy zone: DMA > Kernel command line: > [boot]0020 XICS Init > [boot]0021 XICS Done > PID hash table entries: 4096 (order: 12, 32768 bytes) > clocksource: timebase mult[7d0000] shift[22] registered > Console: colour dummy device 80x25 > console handover: boot [udbg0] -> real [hvc0] > Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes) > freeing bootmem node 0 I've reproduced this on 2.6.27.7. It is caused by commit 8f64e1f2d1e09267ac926e15090fd505c1c0cbcb ("powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes"). The problem is that Jon took a loop which was (in pseudocode): for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); reserve_node_bootmem(nid); and broke it up into: for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); for_each_node(nid) reserve_node_bootmem(nid); The issue comes in when the 'careful_alloc()' is called on a node with no memory. It falls back to using bootmem from a previously-initialized node. But, bootmem has not yet been reserved when Jon's patch is applied. It gives back bogus memory (0xc000000000000000) and pukes later in boot. The following patch collapses the loop back together. It also breaks the mark_reserved_regions_for_nid() code out into a function and adds some comments. I think a huge part of introducing this bug is because for loop was too long and hard to read. The actual bug fix here is the: + if (end_pfn <= node->node_start_pfn || + start_pfn >= node_end_pfn) + continue; Signed-off-by: Dave Hansen Signed-off-by: Paul Mackerras --- arch/powerpc/mm/numa.c | 122 ++++++++++++++++++++++++++++++------------------- 1 file changed, 75 insertions(+), 47 deletions(-) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index eb505ad34a85..a8397bbad3d4 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -865,6 +865,67 @@ static struct notifier_block __cpuinitdata ppc64_numa_nb = { .priority = 1 /* Must run before sched domains notifier. */ }; +static void mark_reserved_regions_for_nid(int nid) +{ + struct pglist_data *node = NODE_DATA(nid); + int i; + + for (i = 0; i < lmb.reserved.cnt; i++) { + unsigned long physbase = lmb.reserved.region[i].base; + unsigned long size = lmb.reserved.region[i].size; + unsigned long start_pfn = physbase >> PAGE_SHIFT; + unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT); + struct node_active_region node_ar; + unsigned long node_end_pfn = node->node_start_pfn + + node->node_spanned_pages; + + /* + * Check to make sure that this lmb.reserved area is + * within the bounds of the node that we care about. + * Checking the nid of the start and end points is not + * sufficient because the reserved area could span the + * entire node. + */ + if (end_pfn <= node->node_start_pfn || + start_pfn >= node_end_pfn) + continue; + + get_node_active_region(start_pfn, &node_ar); + while (start_pfn < end_pfn && + node_ar.start_pfn < node_ar.end_pfn) { + unsigned long reserve_size = size; + /* + * if reserved region extends past active region + * then trim size to active region + */ + if (end_pfn > node_ar.end_pfn) + reserve_size = (node_ar.end_pfn << PAGE_SHIFT) + - (start_pfn << PAGE_SHIFT); + dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, + reserve_size, node_ar.nid); + reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase, + reserve_size, BOOTMEM_DEFAULT); + /* + * if reserved region is contained in the active region + * then done. + */ + if (end_pfn <= node_ar.end_pfn) + break; + + /* + * reserved region extends past the active region + * get next active region that contains this + * reserved region + */ + start_pfn = node_ar.end_pfn; + physbase = start_pfn << PAGE_SHIFT; + size = size - reserve_size; + get_node_active_region(start_pfn, &node_ar); + } + } +} + + void __init do_init_bootmem(void) { int nid; @@ -890,7 +951,13 @@ void __init do_init_bootmem(void) get_pfn_range_for_nid(nid, &start_pfn, &end_pfn); - /* Allocate the node structure node local if possible */ + /* + * Allocate the node structure node local if possible + * + * Be careful moving this around, as it relies on all + * previous nodes' bootmem to be initialized and have + * all reserved areas marked. + */ NODE_DATA(nid) = careful_allocation(nid, sizeof(struct pglist_data), SMP_CACHE_BYTES, end_pfn); @@ -922,53 +989,14 @@ void __init do_init_bootmem(void) start_pfn, end_pfn); free_bootmem_with_active_regions(nid, end_pfn); - } - - /* Mark reserved regions */ - for (i = 0; i < lmb.reserved.cnt; i++) { - unsigned long physbase = lmb.reserved.region[i].base; - unsigned long size = lmb.reserved.region[i].size; - unsigned long start_pfn = physbase >> PAGE_SHIFT; - unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT); - struct node_active_region node_ar; - - get_node_active_region(start_pfn, &node_ar); - while (start_pfn < end_pfn && - node_ar.start_pfn < node_ar.end_pfn) { - unsigned long reserve_size = size; - /* - * if reserved region extends past active region - * then trim size to active region - */ - if (end_pfn > node_ar.end_pfn) - reserve_size = (node_ar.end_pfn << PAGE_SHIFT) - - (start_pfn << PAGE_SHIFT); - dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, - reserve_size, node_ar.nid); - reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase, - reserve_size, BOOTMEM_DEFAULT); - /* - * if reserved region is contained in the active region - * then done. - */ - if (end_pfn <= node_ar.end_pfn) - break; - - /* - * reserved region extends past the active region - * get next active region that contains this - * reserved region - */ - start_pfn = node_ar.end_pfn; - physbase = start_pfn << PAGE_SHIFT; - size = size - reserve_size; - get_node_active_region(start_pfn, &node_ar); - } - - } - - for_each_online_node(nid) + /* + * Be very careful about moving this around. Future + * calls to careful_allocation() depend on this getting + * done correctly. + */ + mark_reserved_regions_for_nid(nid); sparse_memory_present_with_active_regions(nid); + } } void __init paging_init(void) -- cgit v1.2.3 From d015fe9951641b2d869a7ae4a690be2a05a9dc7f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 28 Nov 2008 09:51:22 +0000 Subject: powerpc/cell/axon-msi: Retry on missing interrupt The MSI capture logic for the axon bridge can sometimes lose interrupts in case of high DMA and interrupt load, when it signals an MSI interrupt to the MPIC interrupt controller while we are already handling another MSI. Each MSI vector gets written into a FIFO buffer in main memory using DMA, and that DMA access is normally flushed by the actual interrupt packet on the IOIF. An MMIO register in the MSIC holds the position of the last entry in the FIFO buffer that was written. However, reading that position does not flush the DMA, so that we can observe stale data in the buffer. In a stress test, we have observed the DMA to arrive up to 14 microseconds after reading the register. This patch works around this problem by retrying the access to the FIFO buffer. We can reliably detect the conditioning by writing an invalid MSI vector into the FIFO buffer after reading from it, assuming that all MSIs we get are valid. After detecting an invalid MSI vector, we udelay(1) in the interrupt cascade for up to 100 times before giving up. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/axon_msi.c | 36 +++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index 896548ba1ca1..442cf36aa172 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -95,6 +95,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) struct axon_msic *msic = get_irq_data(irq); u32 write_offset, msi; int idx; + int retry = 0; write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG); pr_debug("axon_msi: original write_offset 0x%x\n", write_offset); @@ -102,7 +103,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) /* write_offset doesn't wrap properly, so we have to mask it */ write_offset &= MSIC_FIFO_SIZE_MASK; - while (msic->read_offset != write_offset) { + while (msic->read_offset != write_offset && retry < 100) { idx = msic->read_offset / sizeof(__le32); msi = le32_to_cpu(msic->fifo_virt[idx]); msi &= 0xFFFF; @@ -110,13 +111,37 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) pr_debug("axon_msi: woff %x roff %x msi %x\n", write_offset, msic->read_offset, msi); + if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) { + generic_handle_irq(msi); + msic->fifo_virt[idx] = cpu_to_le32(0xffffffff); + } else { + /* + * Reading the MSIC_WRITE_OFFSET_REG does not + * reliably flush the outstanding DMA to the + * FIFO buffer. Here we were reading stale + * data, so we need to retry. + */ + udelay(1); + retry++; + pr_debug("axon_msi: invalid irq 0x%x!\n", msi); + continue; + } + + if (retry) { + pr_debug("axon_msi: late irq 0x%x, retry %d\n", + msi, retry); + retry = 0; + } + msic->read_offset += MSIC_FIFO_ENTRY_SIZE; msic->read_offset &= MSIC_FIFO_SIZE_MASK; + } - if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) - generic_handle_irq(msi); - else - pr_debug("axon_msi: invalid irq 0x%x!\n", msi); + if (retry) { + printk(KERN_WARNING "axon_msi: irq timed out\n"); + + msic->read_offset += MSIC_FIFO_ENTRY_SIZE; + msic->read_offset &= MSIC_FIFO_SIZE_MASK; } desc->chip->eoi(irq); @@ -364,6 +389,7 @@ static int axon_msi_probe(struct of_device *device, dn->full_name); goto out_free_fifo; } + memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES); msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP, NR_IRQS, &msic_host_ops, 0); -- cgit v1.2.3 From cc353c30bbdb84f4317a6c149ebb11cde2232e40 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 28 Nov 2008 09:51:23 +0000 Subject: powerpc/mpic: Don't reset affinity for secondary MPIC on boot Kexec/kdump currently fails on the IBM QS2x blades when the kexec happens on a CPU other than the initial boot CPU. It turns out that this is the result of mpic_init trying to set affinity of each interrupt vector to the current boot CPU. As far as I can tell, the same problem is likely to exist on any secondary MPIC, because they have to deliver interrupts to the first output all the time. There are two potential solutions for this: either not set up affinity at all for secondary MPICs, or assume that a single CPU output is connected to the upstream interrupt controller and hardcode affinity to that per architecture. This patch implements the second approach, defaulting to the first output. Currently, all known secondary MPICs are routed to their upstream port using the first destination, so we hardcode that. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mpic.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index f6299cca7814..b24e1d085557 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1271,6 +1271,7 @@ void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count) void __init mpic_init(struct mpic *mpic) { int i; + int cpu; BUG_ON(mpic->num_sources == 0); @@ -1313,6 +1314,11 @@ void __init mpic_init(struct mpic *mpic) mpic_pasemi_msi_init(mpic); + if (mpic->flags & MPIC_PRIMARY) + cpu = hard_smp_processor_id(); + else + cpu = 0; + for (i = 0; i < mpic->num_sources; i++) { /* start with vector = source number, and masked */ u32 vecpri = MPIC_VECPRI_MASK | i | @@ -1323,8 +1329,7 @@ void __init mpic_init(struct mpic *mpic) continue; /* init hw */ mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri); - mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), - 1 << hard_smp_processor_id()); + mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu); } /* Init spurious vector */ -- cgit v1.2.3 From 960cedb4e3eedec6394f224fc832c7a23f35a799 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 28 Nov 2008 09:51:24 +0000 Subject: powerpc/cell: Fix GDB watchpoints, again An earlier patch from Jens Osterkamp attempted to fix GDB watchpoints by enabling the DABRX register at boot time. Unfortunately, this did not work on SMP setups, where secondary CPUs were still using the power-on DABRX value. This introduces the same change for secondary CPUs on cell as well. Reported-by: Ulrich Weigand Tested-by: Ulrich Weigand Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/smp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index c0d86e1f56ea..9046803c8276 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -129,10 +129,15 @@ static int __init smp_iic_probe(void) return cpus_weight(cpu_possible_map); } -static void __devinit smp_iic_setup_cpu(int cpu) +static void __devinit smp_cell_setup_cpu(int cpu) { if (cpu != boot_cpuid) iic_setup_cpu(); + + /* + * change default DABRX to allow user watchpoints + */ + mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER); } static DEFINE_SPINLOCK(timebase_lock); @@ -192,7 +197,7 @@ static struct smp_ops_t bpa_iic_smp_ops = { .message_pass = smp_iic_message_pass, .probe = smp_iic_probe, .kick_cpu = smp_cell_kick_cpu, - .setup_cpu = smp_iic_setup_cpu, + .setup_cpu = smp_cell_setup_cpu, .cpu_bootable = smp_cell_cpu_bootable, }; -- cgit v1.2.3 From ab598b6680f1e74c267d1547ee352f3e1e530f89 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sun, 30 Nov 2008 11:49:45 +0000 Subject: powerpc: Fix system calls on Cell entered with XER.SO=1 It turns out that on Cell, on a kernel with CONFIG_VIRT_CPU_ACCOUNTING = y, if a program sets the SO (summary overflow) bit in the XER and then does a system call, the SO bit in CR0 will be set on return regardless of whether the system call detected an error. Since CR0.SO is used as the error indication from the system call, this means that all system calls appear to fail. The reason is that the workaround for the timebase bug on Cell uses a compare instruction. With CONFIG_VIRT_CPU_ACCOUNTING = y, the ACCOUNT_CPU_USER_ENTRY macro reads the timebase, so we end up doing a compare instruction, which copies XER.SO to CR0.SO. Since we were doing this in the system call entry patch after clearing CR0.SO but before saving the CR, this meant that the saved CR image had CR0.SO set if XER.SO was set on entry. This fixes it by moving the clearing of CR0.SO to after the ACCOUNT_CPU_USER_ENTRY call in the system call entry path. Signed-off-by: Paul Mackerras Acked-by: Arnd Bergmann Acked-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_64.S | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index e6d52845854f..e0bcf9354286 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -57,12 +57,18 @@ system_call_common: beq- 1f ld r1,PACAKSAVE(r13) 1: std r10,0(r1) - crclr so std r11,_NIP(r1) std r12,_MSR(r1) std r0,GPR0(r1) std r10,GPR1(r1) ACCOUNT_CPU_USER_ENTRY(r10, r11) + /* + * This "crclr so" clears CR0.SO, which is the error indication on + * return from this system call. There must be no cmp instruction + * between it and the "mfcr r9" below, otherwise if XER.SO is set, + * CR0.SO will get set, causing all system calls to appear to fail. + */ + crclr so std r2,GPR2(r1) std r3,GPR3(r1) std r4,GPR4(r1) -- cgit v1.2.3 From 151903d5466fbcfb56ce792c3d5ea0ecbae15d07 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 1 Dec 2008 10:23:21 +1000 Subject: drm/i915: Fix copy'n'pasteo that broke VT switch if flushing was non-empty. Introduced in the "Avoid BUG_ONs on VT switch" commit. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 54bb0d0e49b8..d58ddef468f8 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2314,7 +2314,7 @@ i915_gem_idle(struct drm_device *dev) while (!list_empty(&dev_priv->mm.flushing_list)) { struct drm_i915_gem_object *obj_priv; - obj_priv = list_first_entry(&dev_priv->mm.active_list, + obj_priv = list_first_entry(&dev_priv->mm.flushing_list, struct drm_i915_gem_object, list); obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS; -- cgit v1.2.3 From a1e0eb104249817e5251bd4aade50921ffcb2159 Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Sun, 16 Nov 2008 11:44:42 +0000 Subject: powerpc: Fix build for 32-bit SMP configs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit attr_smt_snooze_delay is only defined for CONFIG_PPC64, so protect the attribute removal with the same condition. This fixes this build error on 32-bit SMP configurations: /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c: In function ‘unregister_cpu_online’: /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: ‘attr_smt_snooze_delay’ undeclared (first use in this function) /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: (Each undeclared identifier is reported only once /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: for each function it appears in.) Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/sysfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 86a2ffccef25..20885a38237a 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -717,9 +717,11 @@ static void unregister_cpu_online(unsigned int cpu) BUG_ON(!c->hotpluggable); +#ifdef CONFIG_PPC64 if (!firmware_has_feature(FW_FEATURE_ISERIES) && cpu_has_feature(CPU_FTR_SMT)) sysdev_remove_file(s, &attr_smt_snooze_delay); +#endif /* PMC stuff */ switch (cur_cpu_spec->pmc_type) { -- cgit v1.2.3 From 269f0532332410e97e3edeb78e6cd3bb940e52b4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Nov 2008 13:34:45 -0800 Subject: Revert "USB: improve ehci_watchdog's side effect in CPU power management" This reverts commit f0d781d59cb621e1795d510039df973d0f8b23fc. It was the wrong thing to do, and does not really do what it said it did. Cc: Yi Yang Cc: David Brownell Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci.h | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index b11798d17ae5..c7d4b5a06bdb 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -183,16 +183,14 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) * the async ring; just the I/O watchdog. Note that if a * SHRINK were pending, OFF would never be requested. */ - enum ehci_timer_action oldactions = ehci->actions; + if (timer_pending(&ehci->watchdog) + && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) + & ehci->actions)) + return; if (!test_and_set_bit (action, &ehci->actions)) { unsigned long t; - if (timer_pending(&ehci->watchdog) - && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) - & oldactions)) - return; - switch (action) { case TIMER_IO_WATCHDOG: t = EHCI_IO_JIFFIES; @@ -208,7 +206,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1; break; } - mod_timer(&ehci->watchdog, round_jiffies(t + jiffies)); + mod_timer(&ehci->watchdog, t + jiffies); } } -- cgit v1.2.3 From 0a99e8ac430a27825bd055719765fd0d65cd797f Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Tue, 25 Nov 2008 15:12:33 +0800 Subject: USB: fix SB600 USB subsystem hang bug This patch is required for all AMD SB600 revisions to avoid USB subsystem hang symptom. The USB subsystem hang symptom is observed when the system has multiple USB devices connected to it. In some cases a USB hub may be required to observe this symptom. Reported in bugzilla as #11599, the similar patch for SB700 old revision is: commit b09bc6cbae4dd3a2d35722668ef2c502a7b8b093 Reported-by: raffaele Tested-by: Roman Mamedov Signed-off-by: Shane Huang Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 9d0ea573aef6..36864f958444 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -169,18 +169,21 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } break; case PCI_VENDOR_ID_ATI: - /* SB700 old version has a bug in EHCI controller, + /* SB600 and old version of SB700 have a bug in EHCI controller, * which causes usb devices lose response in some cases. */ - if (pdev->device == 0x4396) { + if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) { p_smbus = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); if (!p_smbus) break; rev = p_smbus->revision; - if ((rev == 0x3a) || (rev == 0x3b)) { + if ((pdev->device == 0x4386) || (rev == 0x3a) + || (rev == 0x3b)) { u8 tmp; + ehci_info(ehci, "applying AMD SB600/SB700 USB " + "freeze workaround\n"); pci_read_config_byte(pdev, 0x53, &tmp); pci_write_config_byte(pdev, 0x53, tmp | (1<<3)); } -- cgit v1.2.3 From 9ac36da3f8bc646a628bd09326e090defc8b7940 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 13 Nov 2008 14:57:20 +0300 Subject: USB: fsl_qe_udc: Report disconnect before unbinding Gadgets disable endpoints in their disconnect callbacks, so we must call disconnect before unbinding. This also fixes muram memory leak, since we free muram in the qe_ep_disable(). But mainly the patch fixes following badness: root@b1:~# insmod fsl_qe_udc.ko fsl_qe_udc: Freescale QE/CPM USB Device Controller driver, 1.0 fsl_qe_udc e01006c0.usb: QE USB controller initialized as device root@b1:~# insmod g_ether.ko g_ether gadget: using random self ethernet address g_ether gadget: using random host ethernet address usb0: MAC be:2d:3c:fa:be:f0 usb0: HOST MAC 62:b8:6a:df:38:66 g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget: g_ether ready fsl_qe_udc e01006c0.usb: fsl_qe_udc bind to driver g_ether g_ether gadget: high speed config #1: CDC Ethernet (ECM) root@b1:~# rmmod g_ether.ko ------------[ cut here ]------------ Badness at drivers/usb/gadget/composite.c:871 [...] NIP [d10c1374] composite_unbind+0x24/0x15c [g_ether] LR [d10a82f4] usb_gadget_unregister_driver+0x128/0x168 [fsl_qe_udc] Call Trace: [cfb93e80] [cfb1f3a0] 0xcfb1f3a0 (unreliable) [cfb93eb0] [d10a82f4] usb_gadget_unregister_driver+0x128/0x168 [fsl_qe_udc] [cfb93ed0] [d10c2a3c] usb_composite_unregister+0x3c/0x4c [g_ether] [cfb93ee0] [c006bde0] sys_delete_module+0x130/0x19c [cfb93f40] [c00142d8] ret_from_syscall+0x0/0x38 [...] fsl_qe_udc e01006c0.usb: unregistered gadget driver 'g_ether' Signed-off-by: Anton Vorontsov Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_qe_udc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 1fe8b44787b3..b3408ff39fba 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2363,6 +2363,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) nuke(loop_ep, -ESHUTDOWN); spin_unlock_irqrestore(&udc_controller->lock, flags); + /* report disconnect; the controller is already quiesced */ + driver->disconnect(&udc_controller->gadget); + /* unbind gadget and unhook driver. */ driver->unbind(&udc_controller->gadget); udc_controller->gadget.dev.driver = NULL; -- cgit v1.2.3 From 1f15a506f356aa21c29b6a7b0e9e826695273dfc Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 13 Nov 2008 15:00:46 +0300 Subject: USB: fsl_usb2_udc: Report disconnect before unbinding Gadgets disable endpoints in their disconnect callbacks, so we must call disconnect before unbinding. The patch fixes following badness: root@b1:~# insmod fsl_usb2_udc.ko Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007) root@b1:~# insmod g_ether.ko g_ether gadget: using random self ethernet address g_ether gadget: using random host ethernet address usb0: MAC 26:07:ba:c0:44:33 usb0: HOST MAC 96:81:0c:05:4d:e3 g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget: g_ether ready fsl-usb2-udc: bind to driver g_ether g_ether gadget: high speed config #1: CDC Ethernet (ECM) root@b1:~# rmmod g_ether.ko ------------[ cut here ]------------ Badness at drivers/usb/gadget/composite.c:871 [...] NIP [e10c3454] composite_unbind+0x24/0x15c [g_ether] LR [e10aa454] usb_gadget_unregister_driver+0x13c/0x164 [fsl_usb2_udc] Call Trace: [df145e80] [ffffff94] 0xffffff94 (unreliable) [df145eb0] [e10aa454] usb_gadget_unregister_driver+0x13c/0x164 [fsl_usb2_udc] [df145ed0] [e10c4c40] usb_composite_unregister+0x3c/0x4c [g_ether] [df145ee0] [c006bcc0] sys_delete_module+0x130/0x19c [df145f40] [c00142d8] ret_from_syscall+0x0/0x38 [...] unregistered gadget driver 'g_ether' Signed-off-by: Anton Vorontsov Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_usb2_udc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 091bb55c9aa7..f3c6703cffda 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1836,6 +1836,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) nuke(loop_ep, -ESHUTDOWN); spin_unlock_irqrestore(&udc_controller->lock, flags); + /* report disconnect; the controller is already quiesced */ + driver->disconnect(&udc_controller->gadget); + /* unbind gadget and unhook driver. */ driver->unbind(&udc_controller->gadget); udc_controller->gadget.dev.driver = NULL; -- cgit v1.2.3 From a6b7b034d7f20761c55743be2acb762ce09a0c6b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 21 Nov 2008 16:15:12 -0500 Subject: USB: storage: unusual_devs entry for Mio C520-GPS This patch (as1176) adds an unusual_devs entry for the Mio C520 GPS unit. Other devices also based on the Mitac hardware use the same USB interface firmware, so the Vendor and Product names are generalized. This fixes Bugzilla #11583. Signed-off-by: Alan Stern Tested-by: Tamas Kerecsen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 6da9a7a962a8..e8e3edaa7cbf 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -318,6 +318,18 @@ UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0), #endif +/* Reported by Tamas Kerecsen + * Obviously the PROM has not been customized by the VAR; + * the Vendor and Product string descriptors are: + * Generic Mass Storage (PROTOTYPE--Remember to change idVendor) + * Generic Manufacturer (PROTOTYPE--Remember to change idVendor) + */ +UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000, + "Mitac", + "GPS", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + /* * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.) * Reported by Pete Zaitcev -- cgit v1.2.3 From 621b239d75b790ac66854d46b094874f69e6776e Mon Sep 17 00:00:00 2001 From: Tobias Kunze Briseño Date: Mon, 24 Nov 2008 11:28:31 -0500 Subject: USB: usb-storage: unusual_devs entry for Nikon D2H MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds an unusual_devs entry for the Nikon D2H camera. From: Tobias Kunze Briseño , Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index e8e3edaa7cbf..e61f2bfc64ad 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -389,6 +389,13 @@ UNUSUAL_DEV( 0x04b0, 0x0401, 0x0200, 0x0200, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Tobias Kunze Briseno */ +UNUSUAL_DEV( 0x04b0, 0x0403, 0x0200, 0x0200, + "NIKON", + "NIKON DSC D2H", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Reported by Milinevsky Dmitry */ UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100, "NIKON", -- cgit v1.2.3 From 5bb4bd9895df508ed2bd8b3280252d8a8170e4ac Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 29 Nov 2008 11:46:21 -0800 Subject: USB: serial: add more Onda device ids to option driver Thanks to Domenico Riccio for pointing these out. Cc: Domenico Riccio Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6fa1ec441b61..809697b3c7fc 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -224,6 +224,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ONDA_VENDOR_ID 0x19d2 #define ONDA_PRODUCT_MSA501HS 0x0001 #define ONDA_PRODUCT_ET502HS 0x0002 +#define ONDA_PRODUCT_MT503HS 0x0200 #define BANDRICH_VENDOR_ID 0x1A8D #define BANDRICH_PRODUCT_C100_1 0x1002 @@ -413,6 +414,40 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) }, + { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) }, { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, -- cgit v1.2.3 From 44ae98b53961e7c8c1d47bbffaf08c4f7bf29249 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sun, 30 Nov 2008 23:27:11 -0800 Subject: MAINTAINERS: add netdev to ATM Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 618c1ef4a397..6d06122d0462 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -779,6 +779,7 @@ ATM P: Chas Williams M: chas@cmf.nrl.navy.mil L: linux-atm-general@lists.sourceforge.net (subscribers-only) +L: netdev@vger.kernel.org W: http://linux-atm.sourceforge.net S: Maintained -- cgit v1.2.3 From 43714539eab42b2fa3653ea7bd667b36c2291b11 Mon Sep 17 00:00:00 2001 From: Mahesh Salgaonkar Date: Sat, 29 Nov 2008 16:50:12 +0530 Subject: sched: don't export sched_mc_power_savings in laptops Impact: do not expose a control that has no effect Fix to prevent sched_mc_power_saving from being exported through sysfs on single-socket systems. (Say multicore single socket (Laptop)) CPU core map of the boot cpu should be equal to possible number of cpus for single socket system. This fix has been developed at FOSS.in kernel workout. Signed-off-by: Mahesh Salgaonkar Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- arch/x86/include/asm/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 4850e4b02b61..ff386ff50ed7 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -239,7 +239,7 @@ struct pci_bus; void set_pci_bus_resources_arch_default(struct pci_bus *b); #ifdef CONFIG_SMP -#define mc_capable() (boot_cpu_data.x86_max_cores > 1) +#define mc_capable() (cpus_weight(per_cpu(cpu_core_map, 0)) != nr_cpu_ids) #define smt_capable() (smp_num_siblings > 1) #endif -- cgit v1.2.3 From b270ee8a9fc9547eb781ce9ccd379450bcf9a204 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 1 Dec 2008 02:48:26 -0800 Subject: sparc64: Fix offset calculation in compute_size() The fault address is somewhere inside of the buffer, not before it. Signed-off-by: David S. Miller --- arch/sparc64/lib/user_fixup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc64/lib/user_fixup.c b/arch/sparc64/lib/user_fixup.c index 19d1fdb17d0e..05a361b0a1a4 100644 --- a/arch/sparc64/lib/user_fixup.c +++ b/arch/sparc64/lib/user_fixup.c @@ -24,7 +24,7 @@ static unsigned long compute_size(unsigned long start, unsigned long size, unsig if (fault_addr < start || fault_addr >= end) { *offset = 0; } else { - *offset = start - fault_addr; + *offset = fault_addr - start; size = end - fault_addr; } return size; -- cgit v1.2.3 From 02d43b1d13a0a55a75bb5c5f98d2b13dbe71ecf9 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 1 Dec 2008 05:46:38 -0500 Subject: documentation: local_ops fix on_each_cpu Impact: update code example in documentation * Dr. David Alan Gilbert (dave@treblig.org) wrote: [...] > I noticed while looking at something else that the example in > local_ops.txt still has the 4 operand on_each_cpu in the latest git; > I don't know the rest of the code around there very well so I thought > it best to mention it rather than post a patch. Reported-by: Dr. David Alan Gilbert Signed-off-by: Mathieu Desnoyers Signed-off-by: Ingo Molnar --- Documentation/local_ops.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt index f4f8b1c6c8ba..23045b8b50f0 100644 --- a/Documentation/local_ops.txt +++ b/Documentation/local_ops.txt @@ -149,7 +149,7 @@ static void do_test_timer(unsigned long data) int cpu; /* Increment the counters */ - on_each_cpu(test_each, NULL, 0, 1); + on_each_cpu(test_each, NULL, 1); /* Read all the counters */ printk("Counters read from CPU %d\n", smp_processor_id()); for_each_online_cpu(cpu) { -- cgit v1.2.3 From 290172e79036fc25a22aaf3da4835ee634886183 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sun, 26 Oct 2008 15:59:37 +0100 Subject: [WATCHDOG] hpwdt: Fix kdump when using hpwdt When the "hpwdt" module is loaded (even if the /dev/watchdog device is not opened), then kdump does not work. The panic kernel either does not start at all or crash in various places. The problem is that hpwdt_pretimeout is registered with register_die_notifier() with the highest possible priority. Because it returns NOTIFY_STOP, the crash_nmi_callback which is also registered with register_die_notifier() is never executed. This causes the shutdown of other CPUs to fail. Reverting the order is no option: The crash_nmi_callback executes HLT and so never returns normally. Because of that, it must be executed as last notifier, which currently is done. So, that patch returns NOTIFY_OK to keep the crash_nmi_callback executed. Signed-off-by: Bernhard Walle Signed-off-by: Wim Van Sebroeck Signed-off-by: Thomas Mingarelli Cc: Vivek Goyal --- drivers/watchdog/hpwdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index f6cff7b5a547..763c1ea5dce5 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -485,7 +485,7 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, "Management Log for details.\n"); } - return NOTIFY_STOP; + return NOTIFY_OK; } /* -- cgit v1.2.3 From 33b07db9f38fe73b3895f8d4db8fdee03e3afec3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 1 Dec 2008 07:55:14 -0800 Subject: Revert "of_platform_driver noise on sparce" This reverts commit e669dae6141ff97d3c7566207f5de3b487dcf837, since it is incomplete, and clashes with fuller patches and the sparc 32/64 unification effort. Requested-by: David Miller Acked-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc64/kernel/pci_fire.c | 2 +- arch/sparc64/kernel/pci_psycho.c | 4 ++-- arch/sparc64/kernel/pci_sun4v.c | 2 +- drivers/sbus/char/bbc_i2c.c | 6 +++--- sound/sparc/cs4231.c | 10 +++++----- 5 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/sparc64/kernel/pci_fire.c b/arch/sparc64/kernel/pci_fire.c index fcbbac66e141..9462b68f4894 100644 --- a/arch/sparc64/kernel/pci_fire.c +++ b/arch/sparc64/kernel/pci_fire.c @@ -455,7 +455,7 @@ static int __init pci_fire_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __init fire_probe(struct of_device *op, +static int __devinit fire_probe(struct of_device *op, const struct of_device_id *match) { struct device_node *dp = op->node; diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 56605adbb5b3..dfb3ec892987 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -493,7 +493,7 @@ static void __init psycho_pbm_init(struct pci_pbm_info *pbm, psycho_scan_bus(pbm, &op->dev); } -static struct pci_pbm_info * __init psycho_find_sibling(u32 upa_portid) +static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid) { struct pci_pbm_info *pbm; @@ -506,7 +506,7 @@ static struct pci_pbm_info * __init psycho_find_sibling(u32 upa_portid) #define PSYCHO_CONFIGSPACE 0x001000000UL -static int __init psycho_probe(struct of_device *op, +static int __devinit psycho_probe(struct of_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *pr_regs; diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 4b27b0e10ce7..34a1fded3941 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -929,7 +929,7 @@ static int __init pci_sun4v_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __init pci_sun4v_probe(struct of_device *op, +static int __devinit pci_sun4v_probe(struct of_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *regs; diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c index 054f5dd58931..f08e169ba1b5 100644 --- a/drivers/sbus/char/bbc_i2c.c +++ b/drivers/sbus/char/bbc_i2c.c @@ -361,7 +361,7 @@ fail: extern int bbc_envctrl_init(struct bbc_i2c_bus *bp); extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp); -static int __init bbc_i2c_probe(struct of_device *op, +static int __devinit bbc_i2c_probe(struct of_device *op, const struct of_device_id *match) { struct bbc_i2c_bus *bp; @@ -386,7 +386,7 @@ static int __init bbc_i2c_probe(struct of_device *op, return err; } -static int __exit bbc_i2c_remove(struct of_device *op) +static int __devexit bbc_i2c_remove(struct of_device *op) { struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev); @@ -417,7 +417,7 @@ static struct of_platform_driver bbc_i2c_driver = { .name = "bbc_i2c", .match_table = bbc_i2c_match, .probe = bbc_i2c_probe, - .remove = __exit_p(bbc_i2c_remove), + .remove = __devexit_p(bbc_i2c_remove), }; static int __init bbc_i2c_init(void) diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c index 6c427bbac326..d44bf98e965e 100644 --- a/sound/sparc/cs4231.c +++ b/sound/sparc/cs4231.c @@ -1856,7 +1856,7 @@ static int __init snd_cs4231_sbus_create(struct snd_card *card, return 0; } -static int __init cs4231_sbus_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit cs4231_sbus_probe(struct of_device *op, const struct of_device_id *match) { struct resource *rp = &op->resource[0]; struct snd_card *card; @@ -2048,7 +2048,7 @@ static int __init snd_cs4231_ebus_create(struct snd_card *card, return 0; } -static int __init cs4231_ebus_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit cs4231_ebus_probe(struct of_device *op, const struct of_device_id *match) { struct snd_card *card; int err; @@ -2072,7 +2072,7 @@ static int __init cs4231_ebus_probe(struct of_device *op, const struct of_device } #endif -static int __init cs4231_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit cs4231_probe(struct of_device *op, const struct of_device_id *match) { #ifdef EBUS_SUPPORT if (!strcmp(op->node->parent->name, "ebus")) @@ -2086,7 +2086,7 @@ static int __init cs4231_probe(struct of_device *op, const struct of_device_id * return -ENODEV; } -static int __exit cs4231_remove(struct of_device *op) +static int __devexit cs4231_remove(struct of_device *op) { struct snd_cs4231 *chip = dev_get_drvdata(&op->dev); @@ -2112,7 +2112,7 @@ static struct of_platform_driver cs4231_driver = { .name = "audio", .match_table = cs4231_match, .probe = cs4231_probe, - .remove = __exit_p(cs4231_remove), + .remove = __devexit_p(cs4231_remove), }; static int __init cs4231_init(void) -- cgit v1.2.3 From 2a1dc509747fdcfdf3a2df818a14908aed86c3d4 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 1 Dec 2008 03:00:35 +0100 Subject: vmscan: protect zone rotation stats by lru lock The zone's rotation statistics must not be accessed without the corresponding LRU lock held. Fix an unprotected write in shrink_active_list(). Acked-by: Rik van Riel Reviewed-by: KOSAKI Motohiro Signed-off-by: Johannes Weiner Signed-off-by: Linus Torvalds --- mm/vmscan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 7ea1440b53db..62e7f62fb559 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1248,6 +1248,7 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, list_add(&page->lru, &l_inactive); } + spin_lock_irq(&zone->lru_lock); /* * Count referenced pages from currently used mappings as * rotated, even though they are moved to the inactive list. @@ -1263,7 +1264,6 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, pgmoved = 0; lru = LRU_BASE + file * LRU_FILE; - spin_lock_irq(&zone->lru_lock); while (!list_empty(&l_inactive)) { page = lru_to_page(&l_inactive); prefetchw_prev_lru_page(page, &l_inactive, flags); -- cgit v1.2.3 From bce02614cd1b3d669af1195695e503e818b60fae Mon Sep 17 00:00:00 2001 From: Martin Petermann Date: Wed, 26 Nov 2008 18:07:35 +0100 Subject: [SCSI] zfcp: fix remote port status check For an incoming RSCN it was checked by the ZFCP_STATUS_PORT_DID_DID define to re-open a remote port or to test the connection. Since this define was re-used it was also necessary to replace that define with ZFCP_STATUS_PORT_PHYS_OPEN. Signed-off-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 1a7c80a77ff5..c5f4bd217bfe 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -125,8 +125,7 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, read_lock_irqsave(&zfcp_data.config_lock, flags); list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) { - /* FIXME: ZFCP_STATUS_PORT_DID_DID check is racy */ - if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_DID_DID)) + if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_PHYS_OPEN)) /* Try to connect to unused ports anyway. */ zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, -- cgit v1.2.3 From 1c1cba17a9078c83a80a099bc207b208d664a13a Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Wed, 26 Nov 2008 18:07:36 +0100 Subject: [SCSI] zfcp: Fix opening of wka ports Running two wka_port_get calls in parallel could issue two open_port requests, overwriting the port handle. Don't issue an open_port for the state PORT_OPENING, and only read the data from GOOD responses. Signed-off-by: Christof Schmitt Acked-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fc.c | 3 ++- drivers/s390/scsi/zfcp_fsf.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index c5f4bd217bfe..ae151390cb9f 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -50,7 +50,8 @@ static int zfcp_wka_port_get(struct zfcp_wka_port *wka_port) if (mutex_lock_interruptible(&wka_port->mutex)) return -ERESTARTSYS; - if (wka_port->status != ZFCP_WKA_PORT_ONLINE) { + if (wka_port->status == ZFCP_WKA_PORT_OFFLINE || + wka_port->status == ZFCP_WKA_PORT_CLOSING) { wka_port->status = ZFCP_WKA_PORT_OPENING; if (zfcp_fsf_open_wka_port(wka_port)) wka_port->status = ZFCP_WKA_PORT_OFFLINE; diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index d024442ee128..48bfd3049244 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1584,6 +1584,7 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req) wka_port->status = ZFCP_WKA_PORT_OFFLINE; break; case FSF_PORT_ALREADY_OPEN: + break; case FSF_GOOD: wka_port->handle = header->port_handle; wka_port->status = ZFCP_WKA_PORT_ONLINE; -- cgit v1.2.3 From 633528c304f20b5c2e3e04d48f620548ce08b12e Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Wed, 26 Nov 2008 18:07:37 +0100 Subject: [SCSI] zfcp: returning an ERR_PTR where a NULL value is expected Aborting a SCSI cmnd might requrie to send a abort_fsf_cmnd. If the creation of this fsf_req fails an ERR_PTR is returned where a NULL value would be expected as an error indicator. This ERR_PTR is dereferenced as valid fsf_req in succeeding processing leading to an error. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 48bfd3049244..0343d881babd 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -930,8 +930,10 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, req_flags, adapter->pool.fsf_req_abort); - if (IS_ERR(req)) + if (IS_ERR(req)) { + req = NULL; goto out; + } if (unlikely(!(atomic_read(&unit->status) & ZFCP_STATUS_COMMON_UNBLOCKED))) @@ -2443,8 +2445,10 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, adapter->pool.fsf_req_scsi); - if (IS_ERR(req)) + if (IS_ERR(req)) { + req = NULL; goto out; + } req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT; req->data = unit; -- cgit v1.2.3 From 26871c97d52e50dc574bd01967926650643b142a Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Wed, 26 Nov 2008 18:07:38 +0100 Subject: [SCSI] zfcp: verify for correct rport state before scanning for SCSI devs Prevent a SCSI target scan for a rport which have turned invalid in the meantime. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_erp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 35364f64da7f..c55dd2728f90 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -1186,7 +1186,9 @@ static void zfcp_erp_scsi_scan(struct work_struct *work) container_of(work, struct zfcp_erp_add_work, work); struct zfcp_unit *unit = p->unit; struct fc_rport *rport = unit->port->rport; - scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, + + if (rport && rport->port_state == FC_PORTSTATE_ONLINE) + scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0); atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); zfcp_unit_put(unit); -- cgit v1.2.3 From 0ac55aa90f2c3bd08e57e52a513b82b18ce0a5bc Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Wed, 26 Nov 2008 18:07:39 +0100 Subject: [SCSI] zfcp: eliminate race between validation and locking The check of having a valid pointer was performed before the processing was secured by the lock. Between those two steps the pointer can turn invalid. During further processing another value is used (referenced by the pointer described above) as a function pointer which is never verified to be valid either, resulting under some circumstances in an invalid function call. This patch is fixing both issues. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 0343d881babd..dc0367690405 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -2116,18 +2116,21 @@ static inline void zfcp_fsf_trace_latency(struct zfcp_fsf_req *fsf_req) static void zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *req) { - struct scsi_cmnd *scpnt = req->data; + struct scsi_cmnd *scpnt; struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *) &(req->qtcb->bottom.io.fcp_rsp); u32 sns_len; char *fcp_rsp_info = (unsigned char *) &fcp_rsp_iu[1]; unsigned long flags; - if (unlikely(!scpnt)) - return; - read_lock_irqsave(&req->adapter->abort_lock, flags); + scpnt = req->data; + if (unlikely(!scpnt)) { + read_unlock_irqrestore(&req->adapter->abort_lock, flags); + return; + } + if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) { set_host_byte(scpnt, DID_SOFT_ERROR); set_driver_byte(scpnt, SUGGEST_RETRY); -- cgit v1.2.3 From fca55b6fb587e42c7761ee30bd1a6c313a9270c9 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Wed, 26 Nov 2008 18:07:40 +0100 Subject: [SCSI] zfcp: fix deadlock between wq triggered port scan and ERP Waiting for the ERP to be finished in a task running in the global kernel work-queue is a bad idea, especially if the ERP needs to run another job in this work-queue before it can finish. -> deadlock. This patch removes the necessity to wait for a finished ERP from the scan task and moves the job scheduling to the end of the ERP. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_erp.c | 3 ++- drivers/s390/scsi/zfcp_fc.c | 1 - 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index c55dd2728f90..c557ba34e1aa 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -720,7 +720,6 @@ static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *act, goto failed_openfcp; atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &act->adapter->status); - schedule_work(&act->adapter->scan_work); return ZFCP_ERP_SUCCEEDED; @@ -1284,6 +1283,8 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) case ZFCP_ERP_ACTION_REOPEN_ADAPTER: if (result != ZFCP_ERP_SUCCEEDED) zfcp_erp_rports_del(adapter); + else + schedule_work(&adapter->scan_work); zfcp_adapter_put(adapter); break; } diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index ae151390cb9f..8aab3091a7b1 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -610,7 +610,6 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter) int ret, i; struct zfcp_gpn_ft *gpn_ft; - zfcp_erp_wait(adapter); /* wait until adapter is finished with ERP */ if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT) return 0; -- cgit v1.2.3 From f7a65e92e4bef3ccf9e008ed8cd52d914b6a4adb Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 27 Nov 2008 11:44:07 +0100 Subject: [SCSI] zfcp: prevent double decrement on host_busy while being busy The zfcp_scsi_queuecommand was not acting according to the standard when the respective unit was not available. In this case an -EBUSY was returned, which is not valid in itself, and in addition scsi_done was called. This combination is not allowed and was leading to a double finish of the request and therefor double decrement of the host_busy counter. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index e46fd3e9f68f..468c880f8b6d 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -88,7 +88,7 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt, ret = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, 0, ZFCP_REQ_AUTO_CLEANUP); if (unlikely(ret == -EBUSY)) - zfcp_scsi_command_fail(scpnt, DID_NO_CONNECT); + return SCSI_MLQUEUE_DEVICE_BUSY; else if (unlikely(ret < 0)) return SCSI_MLQUEUE_HOST_BUSY; -- cgit v1.2.3 From 296fa7f6a3f3342d40df7713e74246198295654b Mon Sep 17 00:00:00 2001 From: Will Newton Date: Mon, 1 Dec 2008 11:36:06 +0000 Subject: drivers/char/tty_io.c: Avoid panic when no console is configured. When no console is configured tty_open tries to call kref_get on a NULL pointer, return ENODEV instead. Signed-off-by: Will Newton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 59f472143f08..1412a8d1e58d 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1795,12 +1795,15 @@ retry_open: } #endif if (device == MKDEV(TTYAUX_MAJOR, 1)) { - driver = tty_driver_kref_get(console_device(&index)); - if (driver) { - /* Don't let /dev/console block */ - filp->f_flags |= O_NONBLOCK; - noctty = 1; - goto got_driver; + struct tty_driver *console_driver = console_device(&index); + if (console_driver) { + driver = tty_driver_kref_get(console_driver); + if (driver) { + /* Don't let /dev/console block */ + filp->f_flags |= O_NONBLOCK; + noctty = 1; + goto got_driver; + } } mutex_unlock(&tty_mutex); return -ENODEV; -- cgit v1.2.3 From e5404586a499f7dce915456e85ff94b2df7a3b1c Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Mon, 1 Dec 2008 11:36:16 +0000 Subject: Add kref to fake tty used by USB console We alloc a fake tty in usb serial console setup function. we should init the tty's kref otherwise we will face WARN_ON after following invoke of tty_port_tty_set --> tty_kref_get. Signed-off-by: Kevin Hao Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/console.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 5b20de130e08..5b95009d2fbb 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -135,6 +135,7 @@ static int usb_console_setup(struct console *co, char *options) err("no more memory"); goto reset_open_count; } + kref_init(&tty->kref); termios = kzalloc(sizeof(*termios), GFP_KERNEL); if (!termios) { retval = -ENOMEM; -- cgit v1.2.3 From 8fbd64e2eeb81d4b94be935a15d6d4829ec62aa2 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 30 Nov 2008 10:15:37 -0600 Subject: [SCSI] aacraid: switch to block timeout aacraid updates the timeout in its slave configure routine if it is too small. This now needs to update the request queue timeout in block. Cc: AACRAID list Signed-off-by: James Bottomley --- drivers/scsi/aacraid/linit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 9aa301c1ed07..162cd927d94b 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -427,8 +427,8 @@ static int aac_slave_configure(struct scsi_device *sdev) * Firmware has an individual device recovery time typically * of 35 seconds, give us a margin. */ - if (sdev->timeout < (45 * HZ)) - sdev->timeout = 45 * HZ; + if (sdev->request_queue->rq_timeout < (45 * HZ)) + blk_queue_rq_timeout(sdev->request_queue, 45*HZ); for (cid = 0; cid < aac->maximum_num_containers; ++cid) if (aac->fsa_dev[cid].valid) ++num_lsu; -- cgit v1.2.3 From 97b5648a8bc2aef980645ee39d31bba0933a6112 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 30 Nov 2008 10:20:37 -0600 Subject: [SCSI] ibmvscsi: switch to block timeout ibmvscsi sets the timeout in its slave configure routine for disk devices. This now needs to update the request queue timeout in block. Cc: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 87e09f35d3d4..6cad1758243a 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1442,7 +1442,7 @@ static int ibmvscsi_slave_configure(struct scsi_device *sdev) spin_lock_irqsave(shost->host_lock, lock_flags); if (sdev->type == TYPE_DISK) { sdev->allow_restart = 1; - sdev->timeout = 60 * HZ; + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); } scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun); spin_unlock_irqrestore(shost->host_lock, lock_flags); -- cgit v1.2.3 From ee1ab9e945803a607ba5c2a96b69e4820a806552 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 30 Nov 2008 10:27:51 -0600 Subject: [SCSI] megaraid_sas: switch to block timeout megaraid_sas sets the timeout in its slave configure routine for devices on special channels. This now needs to update the request queue timeout in block. Cc: "Yang, Bo" Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index a454f94623d7..17ce7abe17ee 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -1016,7 +1016,8 @@ static int megasas_slave_configure(struct scsi_device *sdev) * The RAID firmware may require extended timeouts. */ if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS) - sdev->timeout = MEGASAS_DEFAULT_CMD_TIMEOUT * HZ; + blk_queue_rq_timeout(sdev->request_queue, + MEGASAS_DEFAULT_CMD_TIMEOUT * HZ); return 0; } -- cgit v1.2.3 From 9728c0814ecb505546696a659858fdb761375544 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 30 Nov 2008 10:32:26 -0600 Subject: [SCSI] make scsi_eh_try_stu use block timeout scsi_eh_try_stu() was still using the timeout parameter in the device which is now not set (i.e. zero filled) meaning that it waited no time at all for the start unit command to complete (leading the routine to conclude failure every time). This lead to a 2.6.27 regression: http://bugzilla.kernel.org/show_bug.cgi?id=12120 Where firewire devices that were non spec compliant wouldn't spin up. Fix this by using the block queue timeout value instead. Reported-by: Stefan Richter Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 386361778ebb..edfaf241c5ba 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -932,8 +932,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) int i, rtn = NEEDS_RETRY; for (i = 0; rtn == NEEDS_RETRY && i < 2; i++) - rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, - scmd->device->timeout, 0); + rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, scmd->device->request_queue->rq_timeout, 0); if (rtn == SUCCESS) return 0; -- cgit v1.2.3 From dc5c49bff34e5b5a4334560dc7f7dfeae91d8962 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 30 Nov 2008 10:38:08 -0600 Subject: [SCSI] stex: switch to block timeout stex sets the timeout in its slave configure routine for all devices. This now needs to update the request queue timeout in block. Cc: Ed Lin Signed-off-by: James Bottomley --- drivers/scsi/stex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 3790906a77d1..2fa830c0be27 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -477,7 +477,7 @@ stex_slave_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; - sdev->timeout = 60 * HZ; + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); sdev->tagged_supported = 1; return 0; -- cgit v1.2.3 From 020f97063dd68a8e3b9aac928ac49a438b7416ce Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 1 Dec 2008 17:40:54 +0000 Subject: [ARM] omap: fix a pile of issues This patch fixes a number of sillies, from missing 'const' to using 'return' in void functions, to functions with no arguments not even 'void' and a cast which isn't required. Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap1/io.c | 2 +- arch/arm/plat-omap/include/mach/omapfb.h | 4 ++-- arch/arm/plat-omap/sram.c | 8 ++++---- drivers/video/omap/omapfb_main.c | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index b3bd8ca85118..4c3e582f3d3c 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -128,7 +128,7 @@ void __init omap1_map_common_io(void) * Common low-level hardware init for omap1. This should only get called from * board specific init. */ -void __init omap1_init_common_hw() +void __init omap1_init_common_hw(void) { /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h index ec67fb428607..7b74d1255e0b 100644 --- a/arch/arm/plat-omap/include/mach/omapfb.h +++ b/arch/arm/plat-omap/include/mach/omapfb.h @@ -353,8 +353,8 @@ struct omapfb_device { u32 pseudo_palette[17]; struct lcd_panel *panel; /* LCD panel */ - struct lcd_ctrl *ctrl; /* LCD controller */ - struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ + const struct lcd_ctrl *ctrl; /* LCD controller */ + const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ struct lcd_ctrl_extif *ext_if; /* LCD ctrl external interface */ struct device *dev; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 9f9a921829c0..dcd9d16da2e9 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -255,7 +255,7 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) if (!_omap_sram_reprogram_clock) omap_sram_error(); - return _omap_sram_reprogram_clock(dpllctl, ckctl); + _omap_sram_reprogram_clock(dpllctl, ckctl); } int __init omap1_sram_init(void) @@ -282,8 +282,8 @@ void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, if (!_omap2_sram_ddr_init) omap_sram_error(); - return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, - base_cs, force_unlock); + _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); } static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, @@ -294,7 +294,7 @@ void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) if (!_omap2_sram_reprogram_sdrc) omap_sram_error(); - return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); + _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); } static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 5a5e407dc45f..1a49519dafa4 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -392,7 +392,7 @@ static void set_fb_fix(struct fb_info *fbi) int bpp; rg = &plane->fbdev->mem_desc.region[plane->idx]; - fbi->screen_base = (char __iomem *)rg->vaddr; + fbi->screen_base = rg->vaddr; fix->smem_start = rg->paddr; fix->smem_len = rg->size; -- cgit v1.2.3 From 6b1f9d647e848060d34c3db408413989f1e460ba Mon Sep 17 00:00:00 2001 From: Joachim Fenkes Date: Mon, 1 Dec 2008 10:05:44 -0800 Subject: IB/ehca: Change misleading error message on memory hotplug The error message printed when the eHCA driver prevents memory hotplug is misleading -- the user might think that hot-removing the lhca, hotplugging memory, then hot-adding the lhca again will work, but it actually doesn't. Signed-off-by: Joachim Fenkes Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index bb02a86aa526..bec7e0249358 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -994,8 +994,7 @@ static int ehca_mem_notifier(struct notifier_block *nb, if (printk_timed_ratelimit(&ehca_dmem_warn_time, 30 * 1000)) ehca_gen_err("DMEM operations are not allowed" - "as long as an ehca adapter is" - "attached to the LPAR"); + "in conjunction with eHCA"); return NOTIFY_BAD; } } -- cgit v1.2.3 From 7ec4f4634a4326c1f8fd172c80c8f59c9b3e90a4 Mon Sep 17 00:00:00 2001 From: Stefan Roscher Date: Mon, 1 Dec 2008 10:05:50 -0800 Subject: IB/ehca: Fix problem with generated flush work completions This fix enables ehca device driver to generate flush work completions even if the application doesn't request completions for all work requests. The current implementation of ehca will generate flush work completions for the wrong work requests if an application uses non signaled work completions. Signed-off-by: Stefan Roscher Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_classes.h | 4 ++- drivers/infiniband/hw/ehca/ehca_qp.c | 26 ++++++++++++---- drivers/infiniband/hw/ehca/ehca_reqs.c | 51 ++++++++++++++++++------------- 3 files changed, 53 insertions(+), 28 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 4df887af66a5..7fc35cf0cddf 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -163,7 +163,8 @@ struct ehca_mod_qp_parm { /* struct for tracking if cqes have been reported to the application */ struct ehca_qmap_entry { u16 app_wr_id; - u16 reported; + u8 reported; + u8 cqe_req; }; struct ehca_queue_map { @@ -171,6 +172,7 @@ struct ehca_queue_map { unsigned int entries; unsigned int tail; unsigned int left_to_poll; + unsigned int next_wqe_idx; /* Idx to first wqe to be flushed */ }; struct ehca_qp { diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 9e05ee2db39b..cadbf0cdd910 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -435,9 +435,13 @@ static void reset_queue_map(struct ehca_queue_map *qmap) { int i; - qmap->tail = 0; - for (i = 0; i < qmap->entries; i++) + qmap->tail = qmap->entries - 1; + qmap->left_to_poll = 0; + qmap->next_wqe_idx = 0; + for (i = 0; i < qmap->entries; i++) { qmap->map[i].reported = 1; + qmap->map[i].cqe_req = 0; + } } /* @@ -1121,6 +1125,7 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue, void *wqe_v; u64 q_ofs; u32 wqe_idx; + unsigned int tail_idx; /* convert real to abs address */ wqe_p = wqe_p & (~(1UL << 63)); @@ -1133,12 +1138,17 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue, return -EFAULT; } + tail_idx = (qmap->tail + 1) % qmap->entries; wqe_idx = q_ofs / ipz_queue->qe_size; - if (wqe_idx < qmap->tail) - qmap->left_to_poll = (qmap->entries - qmap->tail) + wqe_idx; - else - qmap->left_to_poll = wqe_idx - qmap->tail; + /* check all processed wqes, whether a cqe is requested or not */ + while (tail_idx != wqe_idx) { + if (qmap->map[tail_idx].cqe_req) + qmap->left_to_poll++; + tail_idx = (tail_idx + 1) % qmap->entries; + } + /* save index in queue, where we have to start flushing */ + qmap->next_wqe_idx = wqe_idx; return 0; } @@ -1185,10 +1195,14 @@ static int check_for_left_cqes(struct ehca_qp *my_qp, struct ehca_shca *shca) } else { spin_lock_irqsave(&my_qp->send_cq->spinlock, flags); my_qp->sq_map.left_to_poll = 0; + my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) % + my_qp->sq_map.entries; spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags); spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags); my_qp->rq_map.left_to_poll = 0; + my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) % + my_qp->rq_map.entries; spin_unlock_irqrestore(&my_qp->recv_cq->spinlock, flags); } diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index 64928079eafa..00a648f4316c 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -179,6 +179,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, qmap_entry->app_wr_id = get_app_wr_id(send_wr->wr_id); qmap_entry->reported = 0; + qmap_entry->cqe_req = 0; switch (send_wr->opcode) { case IB_WR_SEND: @@ -203,8 +204,10 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, if ((send_wr->send_flags & IB_SEND_SIGNALED || qp->init_attr.sq_sig_type == IB_SIGNAL_ALL_WR) - && !hidden) + && !hidden) { wqe_p->wr_flag |= WQE_WRFLAG_REQ_SIGNAL_COM; + qmap_entry->cqe_req = 1; + } if (send_wr->opcode == IB_WR_SEND_WITH_IMM || send_wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) { @@ -569,6 +572,7 @@ static int internal_post_recv(struct ehca_qp *my_qp, qmap_entry = &my_qp->rq_map.map[rq_map_idx]; qmap_entry->app_wr_id = get_app_wr_id(cur_recv_wr->wr_id); qmap_entry->reported = 0; + qmap_entry->cqe_req = 1; wqe_cnt++; } /* eof for cur_recv_wr */ @@ -706,27 +710,34 @@ repoll: goto repoll; wc->qp = &my_qp->ib_qp; + qmap_tail_idx = get_app_wr_id(cqe->work_request_id); + if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) + /* We got a send completion. */ + qmap = &my_qp->sq_map; + else + /* We got a receive completion. */ + qmap = &my_qp->rq_map; + + /* advance the tail pointer */ + qmap->tail = qmap_tail_idx; + if (is_error) { /* * set left_to_poll to 0 because in error state, we will not * get any additional CQEs */ - ehca_add_to_err_list(my_qp, 1); + my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) % + my_qp->sq_map.entries; my_qp->sq_map.left_to_poll = 0; + ehca_add_to_err_list(my_qp, 1); + my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) % + my_qp->rq_map.entries; + my_qp->rq_map.left_to_poll = 0; if (HAS_RQ(my_qp)) ehca_add_to_err_list(my_qp, 0); - my_qp->rq_map.left_to_poll = 0; } - qmap_tail_idx = get_app_wr_id(cqe->work_request_id); - if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) - /* We got a send completion. */ - qmap = &my_qp->sq_map; - else - /* We got a receive completion. */ - qmap = &my_qp->rq_map; - qmap_entry = &qmap->map[qmap_tail_idx]; if (qmap_entry->reported) { ehca_warn(cq->device, "Double cqe on qp_num=%#x", @@ -738,10 +749,6 @@ repoll: wc->wr_id = replace_wr_id(cqe->work_request_id, qmap_entry->app_wr_id); qmap_entry->reported = 1; - /* this is a proper completion, we need to advance the tail pointer */ - if (++qmap->tail == qmap->entries) - qmap->tail = 0; - /* if left_to_poll is decremented to 0, add the QP to the error list */ if (qmap->left_to_poll > 0) { qmap->left_to_poll--; @@ -805,13 +812,14 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq, else qmap = &my_qp->rq_map; - qmap_entry = &qmap->map[qmap->tail]; + qmap_entry = &qmap->map[qmap->next_wqe_idx]; while ((nr < num_entries) && (qmap_entry->reported == 0)) { /* generate flush CQE */ + memset(wc, 0, sizeof(*wc)); - offset = qmap->tail * ipz_queue->qe_size; + offset = qmap->next_wqe_idx * ipz_queue->qe_size; wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset); if (!wqe) { ehca_err(cq->device, "Invalid wqe offset=%#lx on " @@ -850,11 +858,12 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq, wc->qp = &my_qp->ib_qp; - /* mark as reported and advance tail pointer */ + /* mark as reported and advance next_wqe pointer */ qmap_entry->reported = 1; - if (++qmap->tail == qmap->entries) - qmap->tail = 0; - qmap_entry = &qmap->map[qmap->tail]; + qmap->next_wqe_idx++; + if (qmap->next_wqe_idx == qmap->entries) + qmap->next_wqe_idx = 0; + qmap_entry = &qmap->map[qmap->next_wqe_idx]; wc++; nr++; } -- cgit v1.2.3 From 42ab01c31526ac1d06d193f81a498bf3cf2acfe4 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 1 Dec 2008 10:09:37 -0800 Subject: IB/mlx4: Fix MTT leakage in resize CQ When resizing a CQ, MTTs associated with the old CQE buffer were not freed. As a result, if any app used resize CQ repeatedly, all MTTs were eventually exhausted, which led to all memory registration operations failing until the driver is reloaded. Once the RESIZE_CQ command returns successfully from FW, FW no longer accesses the old CQ buffer, so it is safe to deallocate the MTT entries used by the old CQ buffer. Finally, if the RESIZE_CQ command fails, the MTTs allocated for the new CQEs buffer also need to be de-allocated. This fixes . Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/cq.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index d0866a3636e2..18308494a195 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -343,6 +343,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) { struct mlx4_ib_dev *dev = to_mdev(ibcq->device); struct mlx4_ib_cq *cq = to_mcq(ibcq); + struct mlx4_mtt mtt; int outst_cqe; int err; @@ -376,10 +377,13 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) goto out; } + mtt = cq->buf.mtt; + err = mlx4_cq_resize(dev->dev, &cq->mcq, entries, &cq->resize_buf->buf.mtt); if (err) goto err_buf; + mlx4_mtt_cleanup(dev->dev, &mtt); if (ibcq->uobject) { cq->buf = cq->resize_buf->buf; cq->ibcq.cqe = cq->resize_buf->cqe; @@ -406,6 +410,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) goto out; err_buf: + mlx4_mtt_cleanup(dev->dev, &cq->resize_buf->buf.mtt); if (!ibcq->uobject) mlx4_ib_free_cq_buf(dev, &cq->resize_buf->buf, cq->resize_buf->cqe); -- cgit v1.2.3 From 1eedb4a90c958d8d59e0e4f19c297b445df21cf9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 29 Nov 2008 22:37:21 +0900 Subject: ata_piix: add borked Tecra M4 to broken suspend list Tecra M4 sometimes forget what it is and reports bogus data via DMI which makes the machine evade broken suspend matching and thus fail suspend/resume. This patch updates piix_broken_suspend() such that it can match such case. As the borked DMI data is a bit generic, matching many entries to make the match more specific is necessary. As the usual DMI matching is limited to four entries, this patch uses hard coded manual matching. This is reported by Alexandru Romanescu. Signed-off-by: Tejun Heo Cc: Alexandru Romanescu Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 8e37be19bbf5..d6d97d8f3fa4 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1066,6 +1066,21 @@ static int piix_broken_suspend(void) if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL)) return 1; + /* TECRA M4 sometimes forgets its identify and reports bogus + * DMI information. As the bogus information is a bit + * generic, match as many entries as possible. This manual + * matching is necessary because dmi_system_id.matches is + * limited to four entries. + */ + if (!strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") && + !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") && + !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") && + !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0")) + return 1; + return 0; } -- cgit v1.2.3 From 9f14786e27908a176f0568cf2132558efef71b31 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Fri, 28 Nov 2008 20:48:26 +0100 Subject: [libata] pata_rb532_cf: fix and rename register definitions The original standalone driver uses a custom address for the error register. Use it in pata_rb532_cf, too. Rename two register definitions: - The address offset 0x0800 in fact is the ATA base, not ATA command address. - The offset 0x0C00 is not a regular ATA data address, but a buffered one allowing 4-byte IO. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik --- drivers/ata/pata_rb532_cf.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index f8b3ffc8ae9e..392116c1c16a 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -39,9 +39,11 @@ #define RB500_CF_MAXPORTS 1 #define RB500_CF_IO_DELAY 400 -#define RB500_CF_REG_CMD 0x0800 +#define RB500_CF_REG_BASE 0x0800 +#define RB500_CF_REG_ERR 0x080D #define RB500_CF_REG_CTRL 0x080E -#define RB500_CF_REG_DATA 0x0C00 +/* 32bit buffered data register offset */ +#define RB500_CF_REG_DBUF32 0x0C00 struct rb532_cf_info { void __iomem *iobase; @@ -146,13 +148,14 @@ static void rb532_pata_setup_ports(struct ata_host *ah) ap->pio_mask = 0x1f; /* PIO4 */ ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; - ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD; + ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE; ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL; ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL; ata_sff_std_ports(&ap->ioaddr); - ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA; + ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32; + ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR; } static __devinit int rb532_pata_driver_probe(struct platform_device *pdev) -- cgit v1.2.3 From 03f60840fa462e92220b093f778b2426ceab23af Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Fri, 28 Nov 2008 20:48:35 +0100 Subject: [libata] pata_rb532_cf: fix signature of the xfer function Per definition, this function should return the number of bytes consumed. As the original parameter "buflen" is being decremented inside the read/write loop, save it in "retlen" at the beginning. Signed-off-by: Phil Sutter Acked-by: Sergei Shtyltov Acked-by: Bartlomiej Zolnierkiewicz Acked-by: Florian Fainelli Signed-off-by: Jeff Garzik --- drivers/ata/pata_rb532_cf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 392116c1c16a..c2e6fb9f2ef9 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -74,11 +74,12 @@ static void rb532_pata_exec_command(struct ata_port *ap, rb532_pata_finish_io(ap); } -static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, +static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { struct ata_port *ap = adev->link->ap; void __iomem *ioaddr = ap->ioaddr.data_addr; + int retlen = buflen; if (write_data) { for (; buflen > 0; buflen--, buf++) @@ -89,6 +90,7 @@ static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, } rb532_pata_finish_io(adev->link->ap); + return retlen; } static void rb532_pata_freeze(struct ata_port *ap) -- cgit v1.2.3 From ac70a964b0e22a95af3628c344815857a01461b7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 27 Nov 2008 13:36:48 +0900 Subject: libata: blacklist Seagate drives which time out FLUSH_CACHE when used with NCQ Some recent Seagate harddrives have firmware bug which causes FLUSH CACHE to timeout under certain circumstances if NCQ is being used. This can be worked around by disabling NCQ and fixed by updating the firmware. Implement ATA_HORKAGE_FIRMWARE_UPDATE and blacklist these devices. The wiki page has been updated to contain information on this issue. http://ata.wiki.kernel.org/index.php/Known_issues Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 21 +++++++++++++++++++++ include/linux/libata.h | 1 + 2 files changed, 22 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4214bfb13bbd..5e2eb740df46 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2492,6 +2492,13 @@ int ata_dev_configure(struct ata_device *dev) } } + if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) { + ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires " + "firmware update to be fully functional.\n"); + ata_dev_printk(dev, KERN_WARNING, " contact the vendor " + "or visit http://ata.wiki.kernel.org.\n"); + } + return 0; err_out_nosup: @@ -4042,6 +4049,20 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, + /* Seagate NCQ + FLUSH CACHE firmware bug */ + { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, diff --git a/include/linux/libata.h b/include/linux/libata.h index 59b0f1c807b5..ed3f26eb5df1 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -375,6 +375,7 @@ enum { ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands not multiple of 16 bytes */ + ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3 From faa3bd2e48e594e9475e92fb84bb6ebe6f62f23b Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Mon, 24 Nov 2008 09:51:20 -0300 Subject: V4L/DVB (9743): em28xx: fix oops audio Replaced usb_kill_usb for usb_unlink_usb (wait until urb to fully stop require USB core to put the calling process to sleep). Oops: http://www.kerneloops.org/raw.php?rawid=71799&msgid= Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index dfac2e042a52..90236bbfe66a 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -62,7 +62,7 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) dprintk("Stopping isoc\n"); for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { - usb_kill_urb(dev->adev->urb[i]); + usb_unlink_urb(dev->adev->urb[i]); usb_free_urb(dev->adev->urb[i]); dev->adev->urb[i] = NULL; } -- cgit v1.2.3 From 484ab62c5ee805c2bdc405a85a4e64da2722690f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 24 Nov 2008 09:53:22 -0300 Subject: V4L/DVB (9748): em28xx: fix compile warning Label fail_unreg is no longer used. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 90a11b5ac0b1..610f535a257c 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -2105,8 +2105,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return 0; -fail_unreg: - em28xx_release_resources(dev); fail_reg_devices: mutex_unlock(&dev->lock); return retval; -- cgit v1.2.3 From a693b0cdba94f60f7ed43754d2c34151cdd11da5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 1 Dec 2008 18:04:14 -0200 Subject: em28xx: remove backward compat macro added on a previous fix commit 50f3beb50abe0cc0228363af804e50e710b3e5b0 fixed em28xx-alsa locking schema. However, a backport macro was kept. This patch removes the macro, since it is not needed for the module compilation against upstream. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 90236bbfe66a..7a8d49ef646e 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -75,9 +75,6 @@ static void em28xx_audio_isocirq(struct urb *urb) struct em28xx *dev = urb->context; int i; unsigned int oldptr; -#ifdef NO_PCM_LOCK - unsigned long flags; -#endif int period_elapsed = 0; int status; unsigned char *cp; @@ -98,9 +95,6 @@ static void em28xx_audio_isocirq(struct urb *urb) if (!length) continue; -#ifdef NO_PCM_LOCK - spin_lock_irqsave(&dev->adev->slock, flags); -#endif oldptr = dev->adev->hwptr_done_capture; if (oldptr + length >= runtime->buffer_size) { unsigned int cnt = @@ -114,9 +108,7 @@ static void em28xx_audio_isocirq(struct urb *urb) length * stride); } -#ifndef NO_PCM_LOCK snd_pcm_stream_lock(substream); -#endif dev->adev->hwptr_done_capture += length; if (dev->adev->hwptr_done_capture >= @@ -132,11 +124,7 @@ static void em28xx_audio_isocirq(struct urb *urb) period_elapsed = 1; } -#ifdef NO_PCM_LOCK - spin_unlock_irqrestore(&dev->adev->slock, flags); -#else snd_pcm_stream_unlock(substream); -#endif } if (period_elapsed) snd_pcm_period_elapsed(substream); -- cgit v1.2.3 From 3b5da0189c93160e44b878d2c72e9552d642497c Mon Sep 17 00:00:00 2001 From: Coly Li Date: Wed, 5 Nov 2008 15:16:24 +0800 Subject: ocfs2: comments typo fix This patch fixes two typos in comments of ocfs2. Signed-off-by: Coly Li Signed-off-by: Mark Fasheh --- fs/ocfs2/dlm/userdlm.h | 2 +- fs/ocfs2/ocfs2.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/dlm/userdlm.h b/fs/ocfs2/dlm/userdlm.h index 39ec27738499..0c3cc03c61fa 100644 --- a/fs/ocfs2/dlm/userdlm.h +++ b/fs/ocfs2/dlm/userdlm.h @@ -33,7 +33,7 @@ #include /* user_lock_res->l_flags flags. */ -#define USER_LOCK_ATTACHED (0x00000001) /* have we initialized +#define USER_LOCK_ATTACHED (0x00000001) /* we have initialized * the lvb */ #define USER_LOCK_BUSY (0x00000002) /* we are currently in * dlm_lock */ diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index fef7ece32376..3fed9e3d8992 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -85,7 +85,7 @@ enum ocfs2_unlock_action { }; /* ocfs2_lock_res->l_flags flags. */ -#define OCFS2_LOCK_ATTACHED (0x00000001) /* have we initialized +#define OCFS2_LOCK_ATTACHED (0x00000001) /* we have initialized * the lvb */ #define OCFS2_LOCK_BUSY (0x00000002) /* we are currently in * dlm_lock */ -- cgit v1.2.3 From 66f502a416f18cd36179290746aa53736c6b2828 Mon Sep 17 00:00:00 2001 From: David Teigland Date: Mon, 10 Nov 2008 16:24:57 -0600 Subject: ocfs2: initialize stack_user lvbptr The locking_state dump, ocfs2_dlm_seq_show, reads the lvb on locks where it has not yet been initialized by a lock call. Signed-off-by: David Teigland Acked-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/stack_user.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c index faec2d879357..9b76d41a8ac6 100644 --- a/fs/ocfs2/stack_user.c +++ b/fs/ocfs2/stack_user.c @@ -740,6 +740,9 @@ static int user_dlm_lock_status(union ocfs2_dlm_lksb *lksb) static void *user_dlm_lvb(union ocfs2_dlm_lksb *lksb) { + if (!lksb->lksb_fsdlm.sb_lvbptr) + lksb->lksb_fsdlm.sb_lvbptr = (char *)lksb + + sizeof(struct dlm_lksb); return (void *)(lksb->lksb_fsdlm.sb_lvbptr); } -- cgit v1.2.3 From 07f9eebcdfaeefc8f807fa1bcce1d7c3ae6661b1 Mon Sep 17 00:00:00 2001 From: David Teigland Date: Mon, 17 Nov 2008 12:28:48 -0600 Subject: ocfs2: fix wake_up in unlock_ast In ocfs2_unlock_ast(), call wake_up() on lockres before releasing the spin lock on it. As soon as the spin lock is released, the lockres can be freed. Signed-off-by: David Teigland Signed-off-by: Mark Fasheh --- fs/ocfs2/dlmglue.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index ec684426034b..6e6cc0a2e5f7 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -2841,9 +2841,8 @@ static void ocfs2_unlock_ast(void *opaque, int error) lockres_clear_flags(lockres, OCFS2_LOCK_BUSY); lockres->l_unlock_action = OCFS2_UNLOCK_INVALID; - spin_unlock_irqrestore(&lockres->l_lock, flags); - wake_up(&lockres->l_event); + spin_unlock_irqrestore(&lockres->l_lock, flags); mlog_exit_void(); } -- cgit v1.2.3 From a2eee69b814854095ed835a6eb64b8efc220cd6a Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 18 Nov 2008 15:08:42 -0800 Subject: ocfs2: Small documentation update Remove some features from the "not-supported" list that are actually supported now. Signed-off-by: Mark Fasheh --- Documentation/filesystems/ocfs2.txt | 3 --- 1 file changed, 3 deletions(-) diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 4340cc825796..67310fbbb7df 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -28,10 +28,7 @@ Manish Singh Caveats ======= Features which OCFS2 does not support yet: - - extended attributes - quotas - - cluster aware flock - - cluster aware lockf - Directory change notification (F_NOTIFY) - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease) - POSIX ACLs -- cgit v1.2.3 From 07d9a3954a68764aefe16855bcd0f86deeb5c825 Mon Sep 17 00:00:00 2001 From: Coly Li Date: Mon, 17 Nov 2008 12:38:22 +0800 Subject: ocfs2: fix return value set in init_dlmfs_fs() In init_dlmfs_fs(), if calling kmem_cache_create() failed, the code will use return value from calling bdi_init(). The correct behavior should be set status as -ENOMEM before going to "bail:". Signed-off-by: Coly Li Acked-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/dlm/dlmfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/dlm/dlmfs.c b/fs/ocfs2/dlm/dlmfs.c index 533a789c3ef8..ba962d71b34d 100644 --- a/fs/ocfs2/dlm/dlmfs.c +++ b/fs/ocfs2/dlm/dlmfs.c @@ -608,8 +608,10 @@ static int __init init_dlmfs_fs(void) 0, (SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT| SLAB_MEM_SPREAD), dlmfs_init_once); - if (!dlmfs_inode_cache) + if (!dlmfs_inode_cache) { + status = -ENOMEM; goto bail; + } cleanup_inode = 1; user_dlm_worker = create_singlethread_workqueue("user_dlm"); -- cgit v1.2.3 From d6b58f89f7257c8099c2260e2bea042a917d6cdf Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Fri, 21 Nov 2008 14:06:55 -0800 Subject: ocfs2: fix regression in ocfs2_read_blocks_sync() We're panicing in ocfs2_read_blocks_sync() if a jbd-managed buffer is seen. At first glance, this seems ok but in reality it can happen. My test case was to just run 'exorcist'. A struct inode is being pushed out of memory but is then re-read at a later time, before the buffer has been checkpointed by jbd. This causes a BUG to be hit in ocfs2_read_blocks_sync(). Reviewed-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/buffer_head_io.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c index 7e947c672469..3a178ec48d7c 100644 --- a/fs/ocfs2/buffer_head_io.c +++ b/fs/ocfs2/buffer_head_io.c @@ -112,7 +112,7 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block, bh = bhs[i]; if (buffer_jbd(bh)) { - mlog(ML_ERROR, + mlog(ML_BH_IO, "trying to sync read a jbd " "managed bh (blocknr = %llu), skipping\n", (unsigned long long)bh->b_blocknr); @@ -147,15 +147,10 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block, for (i = nr; i > 0; i--) { bh = bhs[i - 1]; - if (buffer_jbd(bh)) { - mlog(ML_ERROR, - "the journal got the buffer while it was " - "locked for io! (blocknr = %llu)\n", - (unsigned long long)bh->b_blocknr); - BUG(); - } + /* No need to wait on the buffer if it's managed by JBD. */ + if (!buffer_jbd(bh)) + wait_on_buffer(bh); - wait_on_buffer(bh); if (!buffer_uptodate(bh)) { /* Status won't be cleared from here on out, * so we can safely record this and loop back @@ -251,8 +246,6 @@ int ocfs2_read_blocks(struct inode *inode, u64 block, int nr, ignore_cache = 1; } - /* XXX: Can we ever get this and *not* have the cached - * flag set? */ if (buffer_jbd(bh)) { if (ignore_cache) mlog(ML_BH_IO, "trying to sync read a jbd " -- cgit v1.2.3 From b29acbdcf877009af3f1fc0750bcac314c51e055 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Mon, 1 Dec 2008 13:13:47 -0800 Subject: mm: vmalloc fix lazy unmapping cache aliasing Jim Radford has reported that the vmap subsystem rewrite was sometimes causing his VIVT ARM system to behave strangely (seemed like going into infinite loops trying to fault in pages to userspace). We determined that the problem was most likely due to a cache aliasing issue. flush_cache_vunmap was only being called at the moment the page tables were to be taken down, however with lazy unmapping, this can happen after the page has subsequently been freed and allocated for something else. The dangling alias may still have dirty data attached to it. The fix for this problem is to do the cache flushing when the caller has called vunmap -- it would be a bug for them to write anything else to the mapping at that point. That appeared to solve Jim's problems. Reported-by: Jim Radford Signed-off-by: Nick Piggin Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 30f826d484f0..f3f6e0758562 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -77,7 +77,6 @@ static void vunmap_page_range(unsigned long addr, unsigned long end) BUG_ON(addr >= end); pgd = pgd_offset_k(addr); - flush_cache_vunmap(addr, end); do { next = pgd_addr_end(addr, end); if (pgd_none_or_clear_bad(pgd)) @@ -543,9 +542,10 @@ static void purge_vmap_area_lazy(void) } /* - * Free and unmap a vmap area + * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been + * called for the correct range previously. */ -static void free_unmap_vmap_area(struct vmap_area *va) +static void free_unmap_vmap_area_noflush(struct vmap_area *va) { va->flags |= VM_LAZY_FREE; atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr); @@ -553,6 +553,15 @@ static void free_unmap_vmap_area(struct vmap_area *va) try_purge_vmap_area_lazy(); } +/* + * Free and unmap a vmap area + */ +static void free_unmap_vmap_area(struct vmap_area *va) +{ + flush_cache_vunmap(va->va_start, va->va_end); + free_unmap_vmap_area_noflush(va); +} + static struct vmap_area *find_vmap_area(unsigned long addr) { struct vmap_area *va; @@ -734,7 +743,7 @@ static void free_vmap_block(struct vmap_block *vb) spin_unlock(&vmap_block_tree_lock); BUG_ON(tmp != vb); - free_unmap_vmap_area(vb->va); + free_unmap_vmap_area_noflush(vb->va); call_rcu(&vb->rcu_head, rcu_free_vb); } @@ -796,6 +805,9 @@ static void vb_free(const void *addr, unsigned long size) BUG_ON(size & ~PAGE_MASK); BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC); + + flush_cache_vunmap((unsigned long)addr, (unsigned long)addr + size); + order = get_order(size); offset = (unsigned long)addr & (VMAP_BLOCK_SIZE - 1); -- cgit v1.2.3 From dc19f9db38295f811d9041bd89b113beccbd763a Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Mon, 1 Dec 2008 13:13:48 -0800 Subject: memcg: memory hotplug fix for notifier callback Fixes for memcg/memory hotplug. While memory hotplug allocate/free memmap, page_cgroup doesn't free page_cgroup at OFFLINE when page_cgroup is allocated via bootomem. (Because freeing bootmem requires special care.) Then, if page_cgroup is allocated by bootmem and memmap is freed/allocated by memory hotplug, page_cgroup->page == page is no longer true. But current MEM_ONLINE handler doesn't check it and update page_cgroup->page if it's not necessary to allocate page_cgroup. (This was not found because memmap is not freed if SPARSEMEM_VMEMMAP is y.) And I noticed that MEM_ONLINE can be called against "part of section". So, freeing page_cgroup at CANCEL_ONLINE will cause trouble. (freeing used page_cgroup) Don't rollback at CANCEL. One more, current memory hotplug notifier is stopped by slub because it sets NOTIFY_STOP_MASK to return vaule. So, page_cgroup's callback never be called. (low priority than slub now.) I think this slub's behavior is not intentional(BUG). and fixes it. Another way to be considered about page_cgroup allocation: - free page_cgroup at OFFLINE even if it's from bootmem and remove specieal handler. But it requires more changes. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12041 Signed-off-by: KAMEZAWA Hiruyoki Cc: Li Zefan Cc: Balbir Singh Cc: Pavel Emelyanov Tested-by: Badari Pulavarty Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_cgroup.c | 43 +++++++++++++++++++++++++++++-------------- mm/slub.c | 6 ++++-- 2 files changed, 33 insertions(+), 16 deletions(-) diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c index 436c00229e70..0b3cbf090a67 100644 --- a/mm/page_cgroup.c +++ b/mm/page_cgroup.c @@ -107,19 +107,29 @@ int __init_refok init_section_page_cgroup(unsigned long pfn) section = __pfn_to_section(pfn); - if (section->page_cgroup) - return 0; - - nid = page_to_nid(pfn_to_page(pfn)); - - table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION; - if (slab_is_available()) { - base = kmalloc_node(table_size, GFP_KERNEL, nid); - if (!base) - base = vmalloc_node(table_size, nid); - } else { - base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), table_size, + if (!section->page_cgroup) { + nid = page_to_nid(pfn_to_page(pfn)); + table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION; + if (slab_is_available()) { + base = kmalloc_node(table_size, GFP_KERNEL, nid); + if (!base) + base = vmalloc_node(table_size, nid); + } else { + base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), + table_size, PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); + } + } else { + /* + * We don't have to allocate page_cgroup again, but + * address of memmap may be changed. So, we have to initialize + * again. + */ + base = section->page_cgroup + pfn; + table_size = 0; + /* check address of memmap is changed or not. */ + if (base->page == pfn_to_page(pfn)) + return 0; } if (!base) { @@ -208,18 +218,23 @@ static int __meminit page_cgroup_callback(struct notifier_block *self, ret = online_page_cgroup(mn->start_pfn, mn->nr_pages, mn->status_change_nid); break; - case MEM_CANCEL_ONLINE: case MEM_OFFLINE: offline_page_cgroup(mn->start_pfn, mn->nr_pages, mn->status_change_nid); break; + case MEM_CANCEL_ONLINE: case MEM_GOING_OFFLINE: break; case MEM_ONLINE: case MEM_CANCEL_OFFLINE: break; } - ret = notifier_from_errno(ret); + + if (ret) + ret = notifier_from_errno(ret); + else + ret = NOTIFY_OK; + return ret; } diff --git a/mm/slub.c b/mm/slub.c index 7ad489af9561..749588a50a5a 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2931,8 +2931,10 @@ static int slab_memory_callback(struct notifier_block *self, case MEM_CANCEL_OFFLINE: break; } - - ret = notifier_from_errno(ret); + if (ret) + ret = notifier_from_errno(ret); + else + ret = NOTIFY_OK; return ret; } -- cgit v1.2.3 From 36be47d6d8d98f54b6c4f891e9f54fb2bf554584 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 1 Dec 2008 13:13:49 -0800 Subject: parport_serial: fix array overflow The netmos_9xx5_combo type assumes that PCI SSID provides always the correct value for the number of parallel and serial ports, but there are indeed broken devices with wrong numbers, which may result in Oops. This patch simply adds the check of the array range. Reference: Novell bnc#447067 https://bugzilla.novell.com/show_bug.cgi?id=447067 Signed-off-by: Takashi Iwai Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/parport/parport_serial.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index e2e95b36a603..101ed49a2d15 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -70,6 +70,8 @@ static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc * parallel ports and is the number of serial ports. */ card->numports = (dev->subsystem_device & 0xf0) >> 4; + if (card->numports > ARRAY_SIZE(card->addr)) + card->numports = ARRAY_SIZE(card->addr); return 0; } -- cgit v1.2.3 From dc924efb52ba9e4dffec5b15ae2242b894198139 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Mon, 1 Dec 2008 13:13:49 -0800 Subject: hwmon: applesmc: make applesmc load automatically on startup make use of the new dmi device loading support to automatically load the applesmc driver based on the dmi_match table. Signed-off-by: Henrik Rydberg Cc: Nicolas Boichat Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index f7dce8b9f64b..086c2a5cef0b 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -1564,3 +1564,4 @@ module_exit(applesmc_exit); MODULE_AUTHOR("Nicolas Boichat"); MODULE_DESCRIPTION("Apple SMC"); MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(dmi, applesmc_whitelist); -- cgit v1.2.3 From dc8c214a9c37eb288b1c4782632649e55d251c68 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Mon, 1 Dec 2008 13:13:51 -0800 Subject: spi documentation: use __initdata on struct Use __initdata for data, not __init. Signed-off-by: Roel Kluin Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/spi/spi-summary | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 8bae2f018d34..0f5122eb282b 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -215,7 +215,7 @@ So for example arch/.../mach-*/board-*.c files might have code like: /* if your mach-* infrastructure doesn't support kernels that can * run on multiple boards, pdata wouldn't benefit from "__init". */ - static struct mysoc_spi_data __init pdata = { ... }; + static struct mysoc_spi_data __initdata pdata = { ... }; static __init board_init(void) { -- cgit v1.2.3 From aaacf4bb51b243875b203e6ff73b5047636b4efa Mon Sep 17 00:00:00 2001 From: Wolfgang Ocker Date: Mon, 1 Dec 2008 13:13:52 -0800 Subject: spi: avoid spidev crash when device is removed I saw a kernel oops in spidev_remove() when a spidev device was registered and I unloaded the SPI master driver: Unable to handle kernel paging request for data at address 0x00000004 Faulting instruction address: 0xc01c0c50 Oops: Kernel access of bad area, sig: 11 [#1] CDSPR Modules linked in: spi_ppc4xx(-) NIP: c01c0c50 LR: c01bf9e4 CTR: c01c0c34 REGS: cec89c30 TRAP: 0300 Not tainted (2.6.27.3izt) MSR: 00021000 CR: 24000228 XER: 20000007 DEAR: 00000004, ESR: 00800000 TASK = cf889040[2070] 'rmmod' THREAD: cec88000 GPR00: 00000000 cec89ce0 cf889040 cec8e000 00000004 cec8e000 ffffffff 00000000 GPR08: 0000001c c0336380 00000000 c01c0c34 00000001 1001a338 100e0000 100df49c GPR16: 100b54c0 100df49c 100ddd20 100f05a8 100b5340 100efd68 00000000 00000000 GPR24: 100ec008 100f0428 c0327788 c0327794 cec8e0ac cec8e000 c0336380 00000000 NIP [c01c0c50] spidev_remove+0x1c/0xe4 LR [c01bf9e4] spi_drv_remove+0x2c/0x3c Call Trace: [cec89d00] [c01bf9e4] spi_drv_remove+0x2c/0x3c [cec89d10] [c01859a0] __device_release_driver+0x78/0xb4 [cec89d20] [c0185ab0] device_release_driver+0x28/0x44 [cec89d40] [c0184be8] bus_remove_device+0xac/0xd8 [cec89d60] [c0183094] device_del+0x100/0x194 [cec89d80] [c0183140] device_unregister+0x18/0x30 [cec89da0] [c01bf30c] __unregister+0x20/0x34 [cec89db0] [c0182778] device_for_each_child+0x38/0x74 [cec89de0] [c01bf2d0] spi_unregister_master+0x28/0x44 [cec89e00] [c01bfeac] spi_bitbang_stop+0x1c/0x58 [cec89e20] [d908a5e0] spi_ppc4xx_of_remove+0x24/0x7c [spi_ppc4xx] [...] IMHO a call to spi_set_drvdata() is missing in spidev_probe(). The patch below helped. Signed-off-by: Wolfgang Ocker Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spidev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 89a43755a453..5d869c4d3eb2 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -597,7 +597,9 @@ static int spidev_probe(struct spi_device *spi) } mutex_unlock(&device_list_lock); - if (status != 0) + if (status == 0) + spi_set_drvdata(spi, spidev); + else kfree(spidev); return status; -- cgit v1.2.3 From b7d271df873c5121a4ca1c70dea126b5920ec2f1 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Mon, 1 Dec 2008 13:13:53 -0800 Subject: spi: mpc52xx_psc_spi chipselect bugfix According to the manual the "tdfOnExit" flag must be set on the last byte we want to send. The PSC controller holds SS low until the flag is set. However, the flag was set always on the last byte of the FIFO, independently if it is the last byte of the transfer. This generates spurious toggling of the SS signals that breaks the protocol of some peripherals. Fix. Signed-off-by: Stefano Babic Acked-by: Grant Likely Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/mpc52xx_psc_spi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index 0debe11b67b4..3b97803e1d11 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -142,6 +142,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, unsigned rfalarm; unsigned send_at_once = MPC52xx_PSC_BUFSIZE; unsigned recv_at_once; + int last_block = 0; if (!t->tx_buf && !t->rx_buf && t->len) return -EINVAL; @@ -151,15 +152,17 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, while (rb < t->len) { if (t->len - rb > MPC52xx_PSC_BUFSIZE) { rfalarm = MPC52xx_PSC_RFALARM; + last_block = 0; } else { send_at_once = t->len - sb; rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb); + last_block = 1; } dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once); for (; send_at_once; sb++, send_at_once--) { /* set EOF flag before the last word is sent */ - if (send_at_once == 1) + if (send_at_once == 1 && last_block) out_8(&psc->ircr2, 0x01); if (tx_buf) -- cgit v1.2.3 From 7ef9964e6d1b911b78709f144000aacadd0ebc21 Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Mon, 1 Dec 2008 13:13:55 -0800 Subject: epoll: introduce resource usage limits It has been thought that the per-user file descriptors limit would also limit the resources that a normal user can request via the epoll interface. Vegard Nossum reported a very simple program (a modified version attached) that can make a normal user to request a pretty large amount of kernel memory, well within the its maximum number of fds. To solve such problem, default limits are now imposed, and /proc based configuration has been introduced. A new directory has been created, named /proc/sys/fs/epoll/ and inside there, there are two configuration points: max_user_instances = Maximum number of devices - per user max_user_watches = Maximum number of "watched" fds - per user The current default for "max_user_watches" limits the memory used by epoll to store "watches", to 1/32 of the amount of the low RAM. As example, a 256MB 32bit machine, will have "max_user_watches" set to roughly 90000. That should be enough to not break existing heavy epoll users. The default value for "max_user_instances" is set to 128, that should be enough too. This also changes the userspace, because a new error code can now come out from EPOLL_CTL_ADD (-ENOSPC). The EMFILE from epoll_create() was already listed, so that should be ok. [akpm@linux-foundation.org: use get_current_user()] Signed-off-by: Davide Libenzi Cc: Michael Kerrisk Cc: Cc: Cyrill Gorcunov Reported-by: Vegard Nossum Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 27 ++++++++++++ fs/eventpoll.c | 85 ++++++++++++++++++++++++++++++++++---- include/linux/sched.h | 4 ++ kernel/sysctl.c | 10 +++++ 4 files changed, 118 insertions(+), 8 deletions(-) diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index bcceb99b81dd..bb1b0dd3bfcb 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -44,6 +44,7 @@ Table of Contents 2.14 /proc//io - Display the IO accounting fields 2.15 /proc//coredump_filter - Core dump filtering settings 2.16 /proc//mountinfo - Information about mounts + 2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface ------------------------------------------------------------------------------ Preface @@ -2483,4 +2484,30 @@ For more information on mount propagation see: Documentation/filesystems/sharedsubtree.txt +2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface +-------------------------------------------------------- + +This directory contains configuration options for the epoll(7) interface. + +max_user_instances +------------------ + +This is the maximum number of epoll file descriptors that a single user can +have open at a given time. The default value is 128, and should be enough +for normal users. + +max_user_watches +---------------- + +Every epoll file descriptor can store a number of files to be monitored +for event readiness. Each one of these monitored files constitutes a "watch". +This configuration option sets the maximum number of "watches" that are +allowed for each user. +Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes +on a 64bit one. +The current default value for max_user_watches is the 1/32 of the available +low memory, divided for the "watch" cost in bytes. + + ------------------------------------------------------------------------------ + diff --git a/fs/eventpoll.c b/fs/eventpoll.c index aec5c13f6341..96355d505347 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -102,6 +102,8 @@ #define EP_UNACTIVE_PTR ((void *) -1L) +#define EP_ITEM_COST (sizeof(struct epitem) + sizeof(struct eppoll_entry)) + struct epoll_filefd { struct file *file; int fd; @@ -200,6 +202,9 @@ struct eventpoll { * holding ->lock. */ struct epitem *ovflist; + + /* The user that created the eventpoll descriptor */ + struct user_struct *user; }; /* Wait structure used by the poll hooks */ @@ -226,10 +231,18 @@ struct ep_pqueue { struct epitem *epi; }; +/* + * Configuration options available inside /proc/sys/fs/epoll/ + */ +/* Maximum number of epoll devices, per user */ +static int max_user_instances __read_mostly; +/* Maximum number of epoll watched descriptors, per user */ +static int max_user_watches __read_mostly; + /* * This mutex is used to serialize ep_free() and eventpoll_release_file(). */ -static struct mutex epmutex; +static DEFINE_MUTEX(epmutex); /* Safe wake up implementation */ static struct poll_safewake psw; @@ -240,6 +253,33 @@ static struct kmem_cache *epi_cache __read_mostly; /* Slab cache used to allocate "struct eppoll_entry" */ static struct kmem_cache *pwq_cache __read_mostly; +#ifdef CONFIG_SYSCTL + +#include + +static int zero; + +ctl_table epoll_table[] = { + { + .procname = "max_user_instances", + .data = &max_user_instances, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .extra1 = &zero, + }, + { + .procname = "max_user_watches", + .data = &max_user_watches, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .extra1 = &zero, + }, + { .ctl_name = 0 } +}; +#endif /* CONFIG_SYSCTL */ + /* Setup the structure that is used as key for the RB tree */ static inline void ep_set_ffd(struct epoll_filefd *ffd, @@ -402,6 +442,8 @@ static int ep_remove(struct eventpoll *ep, struct epitem *epi) /* At this point it is safe to free the eventpoll item */ kmem_cache_free(epi_cache, epi); + atomic_dec(&ep->user->epoll_watches); + DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_remove(%p, %p)\n", current, ep, file)); @@ -449,6 +491,8 @@ static void ep_free(struct eventpoll *ep) mutex_unlock(&epmutex); mutex_destroy(&ep->mtx); + atomic_dec(&ep->user->epoll_devs); + free_uid(ep->user); kfree(ep); } @@ -532,10 +576,19 @@ void eventpoll_release_file(struct file *file) static int ep_alloc(struct eventpoll **pep) { - struct eventpoll *ep = kzalloc(sizeof(*ep), GFP_KERNEL); + int error; + struct user_struct *user; + struct eventpoll *ep; - if (!ep) - return -ENOMEM; + user = get_current_user(); + error = -EMFILE; + if (unlikely(atomic_read(&user->epoll_devs) >= + max_user_instances)) + goto free_uid; + error = -ENOMEM; + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (unlikely(!ep)) + goto free_uid; spin_lock_init(&ep->lock); mutex_init(&ep->mtx); @@ -544,12 +597,17 @@ static int ep_alloc(struct eventpoll **pep) INIT_LIST_HEAD(&ep->rdllist); ep->rbr = RB_ROOT; ep->ovflist = EP_UNACTIVE_PTR; + ep->user = user; *pep = ep; DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_alloc() ep=%p\n", current, ep)); return 0; + +free_uid: + free_uid(user); + return error; } /* @@ -703,9 +761,11 @@ static int ep_insert(struct eventpoll *ep, struct epoll_event *event, struct epitem *epi; struct ep_pqueue epq; - error = -ENOMEM; + if (unlikely(atomic_read(&ep->user->epoll_watches) >= + max_user_watches)) + return -ENOSPC; if (!(epi = kmem_cache_alloc(epi_cache, GFP_KERNEL))) - goto error_return; + return -ENOMEM; /* Item initialization follow here ... */ INIT_LIST_HEAD(&epi->rdllink); @@ -735,6 +795,7 @@ static int ep_insert(struct eventpoll *ep, struct epoll_event *event, * install process. Namely an allocation for a wait queue failed due * high memory pressure. */ + error = -ENOMEM; if (epi->nwait < 0) goto error_unregister; @@ -765,6 +826,8 @@ static int ep_insert(struct eventpoll *ep, struct epoll_event *event, spin_unlock_irqrestore(&ep->lock, flags); + atomic_inc(&ep->user->epoll_watches); + /* We have to call this outside the lock */ if (pwake) ep_poll_safewake(&psw, &ep->poll_wait); @@ -789,7 +852,7 @@ error_unregister: spin_unlock_irqrestore(&ep->lock, flags); kmem_cache_free(epi_cache, epi); -error_return: + return error; } @@ -1078,6 +1141,7 @@ asmlinkage long sys_epoll_create1(int flags) flags & O_CLOEXEC); if (fd < 0) ep_free(ep); + atomic_inc(&ep->user->epoll_devs); error_return: DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n", @@ -1299,7 +1363,12 @@ asmlinkage long sys_epoll_pwait(int epfd, struct epoll_event __user *events, static int __init eventpoll_init(void) { - mutex_init(&epmutex); + struct sysinfo si; + + si_meminfo(&si); + max_user_instances = 128; + max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) / + EP_ITEM_COST; /* Initialize the structure used to perform safe poll wait head wake ups */ ep_poll_safewake_init(&psw); diff --git a/include/linux/sched.h b/include/linux/sched.h index 644ffbda17ca..55e30d114477 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -630,6 +630,10 @@ struct user_struct { atomic_t inotify_watches; /* How many inotify watches does this user have? */ atomic_t inotify_devs; /* How many inotify devs does this user have opened? */ #endif +#ifdef CONFIG_EPOLL + atomic_t epoll_devs; /* The number of epoll descriptors currently open */ + atomic_t epoll_watches; /* The number of file descriptors currently watched */ +#endif #ifdef CONFIG_POSIX_MQUEUE /* protected by mq_lock */ unsigned long mq_bytes; /* How many bytes can be allocated to mqueue? */ diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 9d048fa2d902..3d56fe7570da 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -176,6 +176,9 @@ extern struct ctl_table random_table[]; #ifdef CONFIG_INOTIFY_USER extern struct ctl_table inotify_table[]; #endif +#ifdef CONFIG_EPOLL +extern struct ctl_table epoll_table[]; +#endif #ifdef HAVE_ARCH_PICK_MMAP_LAYOUT int sysctl_legacy_va_layout; @@ -1325,6 +1328,13 @@ static struct ctl_table fs_table[] = { .child = inotify_table, }, #endif +#ifdef CONFIG_EPOLL + { + .procname = "epoll", + .mode = 0555, + .child = epoll_table, + }, +#endif #endif { .ctl_name = KERN_SETUID_DUMPABLE, -- cgit v1.2.3 From 6a010b56e9bd2fdb32efd153e1a08305949b6b53 Mon Sep 17 00:00:00 2001 From: Julien Boibessot Date: Mon, 1 Dec 2008 13:13:55 -0800 Subject: spi: fix spi_imx probe oopsing Corrects spi_imx driver oops during initialization/probing: can't use drv_data before it's allocated. Signed-off-by: Julien Boibessot Acked-by: Sascha Hauer Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_imx.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 0b4db0ce78d6..269a55ec52ef 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -1456,7 +1456,7 @@ static int __init spi_imx_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct spi_imx_master *platform_info; struct spi_master *master; - struct driver_data *drv_data = NULL; + struct driver_data *drv_data; struct resource *res; int irq, status = 0; @@ -1467,14 +1467,6 @@ static int __init spi_imx_probe(struct platform_device *pdev) goto err_no_pdata; } - drv_data->clk = clk_get(&pdev->dev, "perclk2"); - if (IS_ERR(drv_data->clk)) { - dev_err(&pdev->dev, "probe - cannot get get\n"); - status = PTR_ERR(drv_data->clk); - goto err_no_clk; - } - clk_enable(drv_data->clk); - /* Allocate master with space for drv_data */ master = spi_alloc_master(dev, sizeof(struct driver_data)); if (!master) { @@ -1495,6 +1487,14 @@ static int __init spi_imx_probe(struct platform_device *pdev) drv_data->dummy_dma_buf = SPI_DUMMY_u32; + drv_data->clk = clk_get(&pdev->dev, "perclk2"); + if (IS_ERR(drv_data->clk)) { + dev_err(&pdev->dev, "probe - cannot get clock\n"); + status = PTR_ERR(drv_data->clk); + goto err_no_clk; + } + clk_enable(drv_data->clk); + /* Find and map resources */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -1630,12 +1630,13 @@ err_no_iomap: kfree(drv_data->ioarea); err_no_iores: - spi_master_put(master); - -err_no_pdata: clk_disable(drv_data->clk); clk_put(drv_data->clk); + err_no_clk: + spi_master_put(master); + +err_no_pdata: err_no_mem: return status; } -- cgit v1.2.3 From 4e253d23003b54c88d0919d6088be74f00eec3c7 Mon Sep 17 00:00:00 2001 From: Jan Nikitenko Date: Mon, 1 Dec 2008 13:13:56 -0800 Subject: spi: au1550_spi full duplex dma fix Fix unsafe order in dma mapping operation: always flush data from the cache *BEFORE* invalidating it, to allow full duplex transfers where the same buffer may be used for both writes and reads. Tested with mmc-spi. Signed-off-by: Jan Nikitenko Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/au1550_spi.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c index 87b73e0169c5..b02f25c702fd 100644 --- a/drivers/spi/au1550_spi.c +++ b/drivers/spi/au1550_spi.c @@ -369,10 +369,23 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) dma_rx_addr = t->rx_dma; /* - * check if buffers are already dma mapped, map them otherwise + * check if buffers are already dma mapped, map them otherwise: + * - first map the TX buffer, so cache data gets written to memory + * - then map the RX buffer, so that cache entries (with + * soon-to-be-stale data) get removed * use rx buffer in place of tx if tx buffer was not provided * use temp rx buffer (preallocated or realloc to fit) for rx dma */ + if (t->tx_buf) { + if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ + dma_tx_addr = dma_map_single(hw->dev, + (void *)t->tx_buf, + t->len, DMA_TO_DEVICE); + if (dma_mapping_error(hw->dev, dma_tx_addr)) + dev_err(hw->dev, "tx dma map error\n"); + } + } + if (t->rx_buf) { if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ dma_rx_addr = dma_map_single(hw->dev, @@ -396,15 +409,8 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) dma_sync_single_for_device(hw->dev, dma_rx_addr, t->len, DMA_FROM_DEVICE); } - if (t->tx_buf) { - if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ - dma_tx_addr = dma_map_single(hw->dev, - (void *)t->tx_buf, - t->len, DMA_TO_DEVICE); - if (dma_mapping_error(hw->dev, dma_tx_addr)) - dev_err(hw->dev, "tx dma map error\n"); - } - } else { + + if (!t->tx_buf) { dma_sync_single_for_device(hw->dev, dma_rx_addr, t->len, DMA_BIDIRECTIONAL); hw->tx = hw->rx; -- cgit v1.2.3 From e39ea8a2def1fcb203ed0183317124348962e351 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 1 Dec 2008 13:13:56 -0800 Subject: spi: fix spi_s3c24xx_gpio device handle lookup The spidev_to_sg() call in spi_s3c24xx_gpio.c was using the wrong method to convert the spi device into the private data for the driver. Fix this by using spi_master_get_devdata. Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx_gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c index cc1f647f579b..8bb2b4ee3e50 100644 --- a/drivers/spi/spi_s3c24xx_gpio.c +++ b/drivers/spi/spi_s3c24xx_gpio.c @@ -34,7 +34,7 @@ struct s3c2410_spigpio { static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi) { - return spi->controller_data; + return spi_master_get_devdata(spi->master); } static inline void setsck(struct spi_device *dev, int on) -- cgit v1.2.3 From b93c35ff39d19f20c47c06c206986afefecc777a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 1 Dec 2008 13:13:57 -0800 Subject: spi: fix spi_s3c24xx_gpio num_chipselect The spi master driver must have num_chipselect set to allow the bus to initialise. Pass this through the platform data. Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-s3c2410/include/mach/spi-gpio.h | 1 + drivers/spi/spi_s3c24xx_gpio.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h index 3fe8be9ca110..980a099e209c 100644 --- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h @@ -18,6 +18,7 @@ struct s3c2410_spigpio_info { unsigned long pin_mosi; unsigned long pin_miso; + int num_chipselect; int bus_num; void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs); diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c index 8bb2b4ee3e50..f2447a5476bb 100644 --- a/drivers/spi/spi_s3c24xx_gpio.c +++ b/drivers/spi/spi_s3c24xx_gpio.c @@ -118,6 +118,7 @@ static int s3c2410_spigpio_probe(struct platform_device *dev) /* setup spi bitbang adaptor */ sp->bitbang.master = spi_master_get(master); sp->bitbang.master->bus_num = info->bus_num; + sp->bitbang.master->num_chipselect = info->num_chipselect; sp->bitbang.chipselect = s3c2410_spigpio_chipselect; sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0; -- cgit v1.2.3 From c4c6fa9891f3d1bcaae4f39fb751d5302965b566 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 1 Dec 2008 13:13:58 -0800 Subject: radeonfb: fix problem with color expansion & alignment The engine on some radeon variants locks up if color expansion is called for non aligned source data. This patch enables a feature of the core fbdev to request aligned input pixmaps and uses the HW clipping engine to clip the output to the requested size Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11875 Signed-off-by: Benjamin Herrenschmidt Tested-by: James Cloos Cc: "Rafael J. Wysocki" Cc: "David S. Miller" Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/aty/radeon_accel.c | 21 ++++++++++++--------- drivers/video/aty/radeon_base.c | 18 ++++++++++++++++++ 2 files changed, 30 insertions(+), 9 deletions(-) diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c index 8718f7349d6b..a547e5d4c8bf 100644 --- a/drivers/video/aty/radeon_accel.c +++ b/drivers/video/aty/radeon_accel.c @@ -174,12 +174,12 @@ static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo, const struct fb_image *image, u32 fg, u32 bg) { - unsigned int src_bytes, dwords; + unsigned int dwords; u32 *bits; radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, rinfo->dp_gui_mc_base | - GMC_BRUSH_NONE | + GMC_BRUSH_NONE | GMC_DST_CLIP_LEAVE | GMC_SRC_DATATYPE_MONO_FG_BG | ROP3_S | GMC_BYTE_ORDER_MSB_TO_LSB | @@ -189,9 +189,6 @@ static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo, radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg); radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg); - radeon_fifo_wait(rinfo, 1); - OUTREG(DST_Y_X, (image->dy << 16) | image->dx); - /* Ensure the dst cache is flushed and the engine idle before * issuing the operation. * @@ -205,13 +202,19 @@ static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo, /* X here pads width to a multiple of 32 and uses the clipper to * adjust the result. Is that really necessary ? Things seem to - * work ok for me without that and the doco doesn't seem to imply + * work ok for me without that and the doco doesn't seem to imply] * there is such a restriction. */ - OUTREG(DST_WIDTH_HEIGHT, (image->width << 16) | image->height); + radeon_fifo_wait(rinfo, 4); + OUTREG(SC_TOP_LEFT, (image->dy << 16) | image->dx); + OUTREG(SC_BOTTOM_RIGHT, ((image->dy + image->height) << 16) | + (image->dx + image->width)); + OUTREG(DST_Y_X, (image->dy << 16) | image->dx); + + OUTREG(DST_HEIGHT_WIDTH, (image->height << 16) | ((image->width + 31) & ~31)); - src_bytes = (((image->width * image->depth) + 7) / 8) * image->height; - dwords = (src_bytes + 3) / 4; + dwords = (image->width + 31) >> 5; + dwords *= image->height; bits = (u32*)(image->data); while(dwords >= 8) { diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 9a5821c65ebf..b3ffe8205d2b 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -1875,6 +1875,7 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo) info->fbops = &radeonfb_ops; info->screen_base = rinfo->fb_base; info->screen_size = rinfo->mapped_vram; + /* Fill fix common fields */ strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id)); info->fix.smem_start = rinfo->fb_base_phys; @@ -1889,8 +1890,25 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo) info->fix.mmio_len = RADEON_REGSIZE; info->fix.accel = FB_ACCEL_ATI_RADEON; + /* Allocate colormap */ fb_alloc_cmap(&info->cmap, 256, 0); + /* Setup pixmap used for acceleration */ +#define PIXMAP_SIZE (2048 * 4) + + info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL); + if (!info->pixmap.addr) { + printk(KERN_ERR "radeonfb: Failed to allocate pixmap !\n"); + noaccel = 1; + goto bail; + } + info->pixmap.size = PIXMAP_SIZE; + info->pixmap.flags = FB_PIXMAP_SYSTEM; + info->pixmap.scan_align = 4; + info->pixmap.buf_align = 4; + info->pixmap.access_align = 32; + +bail: if (noaccel) info->flags |= FBINFO_HWACCEL_DISABLED; -- cgit v1.2.3 From a8005992836434cab6182c6147993d21442184c1 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 1 Dec 2008 13:14:00 -0800 Subject: taint: add missing comment The description for 'D' was missing in the comment... (causing me a minute of WTF followed by looking at more of the code) Signed-off-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/panic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/panic.c b/kernel/panic.c index 6513aac8e992..4d5088355bfe 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -167,6 +167,7 @@ static const struct tnt tnts[] = { * 'M' - System experienced a machine check exception. * 'B' - System has hit bad_page. * 'U' - Userspace-defined naughtiness. + * 'D' - Kernel has oopsed before * 'A' - ACPI table overridden. * 'W' - Taint on warning. * 'C' - modules from drivers/staging are loaded. -- cgit v1.2.3 From 4280e3126f641898f0ed1a931645373d3489e2a6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 1 Dec 2008 13:14:00 -0800 Subject: frv: fix mmap2 error handling Fix the error handling in sys_mmap2(). Currently, if the pgoff check fails, fput() might have to be called (which it isn't), so do the pgoff check first, before fget() is called. Signed-off-by: David Howells Reported-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/sys_frv.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c index 49b2cf2c38f3..baadc97f8627 100644 --- a/arch/frv/kernel/sys_frv.c +++ b/arch/frv/kernel/sys_frv.c @@ -35,22 +35,21 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, int error = -EBADF; struct file * file = NULL; - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - /* As with sparc32, make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE we have.... */ /* But unlike sparc32, don't just silently break if we're trying to map something we can't */ - if (pgoff & ((1<<(PAGE_SHIFT-12))-1)) + if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1)) return -EINVAL; + pgoff >>= PAGE_SHIFT - 12; - pgoff >>= (PAGE_SHIFT - 12); + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } down_write(¤t->mm->mmap_sem); error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); -- cgit v1.2.3 From 1d678f365dae28420fa7329a2a35390b3582678d Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 1 Dec 2008 13:14:01 -0800 Subject: DMA-API.txt: fix description of pci_map_sg/dma_map_sg scatterlists handling - pci_map_sg/dma_map_sg are used with a scatter gather list that doesn't come from the block layer (e.g. some network drivers do). - how IOMMUs merge adjacent elements of the scatter/gather list is independent of how the block layer determines sees elements. Signed-off-by: FUJITA Tomonori Cc: James Bottomley Cc: Tejun Heo Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/DMA-API.txt | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index b8e86460046e..b462bb149543 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -316,12 +316,10 @@ reduce current DMA mapping usage or delay and try again later). pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction) -Maps a scatter gather list from the block layer. - Returns: the number of physical segments mapped (this may be shorter -than passed in if the block layer determines that some -elements of the scatter/gather list are physically adjacent and thus -may be mapped with a single entry). +than passed in if some elements of the scatter/gather list are +physically or virtually adjacent and an IOMMU maps them with a single +entry). Please note that the sg cannot be mapped again if it has been mapped once. The mapping process is allowed to destroy information in the sg. -- cgit v1.2.3 From 6ff2d39b91aec3dcae951afa982059e3dd9b49dc Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Mon, 1 Dec 2008 13:14:02 -0800 Subject: lib/idr.c: fix rcu related race with idr_find 2nd part of the fixes needed for http://bugzilla.kernel.org/show_bug.cgi?id=11796. When the idr tree is either grown or shrunk, then the update to the number of layers and the top pointer were not atomic. This race caused crashes. The attached patch fixes that by replicating the layers counter in each layer, thus idr_find doesn't need idp->layers anymore. Signed-off-by: Manfred Spraul Cc: Clement Calmels Cc: Nadia Derbey Cc: Pierre Peiffer Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/idr.h | 3 ++- lib/idr.c | 14 ++++++++++++-- 2 files changed, 14 insertions(+), 3 deletions(-) diff --git a/include/linux/idr.h b/include/linux/idr.h index fa035f96f2a3..dd846df8cd32 100644 --- a/include/linux/idr.h +++ b/include/linux/idr.h @@ -52,13 +52,14 @@ struct idr_layer { unsigned long bitmap; /* A zero bit means "space here" */ struct idr_layer *ary[1<layer = l-1; rcu_assign_pointer(p->ary[m], new); p->count++; } @@ -210,6 +211,7 @@ build_up: if (unlikely(!p)) { if (!(p = get_from_free_list(idp))) return -1; + p->layer = 0; layers = 1; } /* @@ -237,6 +239,7 @@ build_up: } new->ary[0] = p; new->count = 1; + new->layer = layers-1; if (p->bitmap == IDR_FULL) __set_bit(0, &new->bitmap); p = new; @@ -493,17 +496,21 @@ void *idr_find(struct idr *idp, int id) int n; struct idr_layer *p; - n = idp->layers * IDR_BITS; p = rcu_dereference(idp->top); + if (!p) + return NULL; + n = (p->layer+1) * IDR_BITS; /* Mask off upper bits we don't use for the search. */ id &= MAX_ID_MASK; if (id >= (1 << n)) return NULL; + BUG_ON(n == 0); while (n > 0 && p) { n -= IDR_BITS; + BUG_ON(n != p->layer*IDR_BITS); p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]); } return((void *)p); @@ -582,8 +589,11 @@ void *idr_replace(struct idr *idp, void *ptr, int id) int n; struct idr_layer *p, *old_p; - n = idp->layers * IDR_BITS; p = idp->top; + if (!p) + return ERR_PTR(-EINVAL); + + n = (p->layer+1) * IDR_BITS; id &= MAX_ID_MASK; -- cgit v1.2.3 From ced69090c573f1db253fb6b84ec537f4f3d7e2f4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 1 Dec 2008 13:14:03 -0800 Subject: kernel-doc: handle varargs cleanly The method for listing varargs in kernel-doc notation is: * @...: these arguments are printed by the @fmt argument but scripts/kernel-doc is confused: it always lists varargs as: ... variable arguments and ignores the @...: line's description, but then prints that line after the list of function parameters as though it's not part of the function parameters. This patch makes kernel-doc print the supplied @... description if it is present; otherwise a boilerplate "variable arguments" is printed. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/kernel-doc | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/scripts/kernel-doc b/scripts/kernel-doc index a53e2fc8dfb5..d27aad78e1d8 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -378,6 +378,10 @@ sub dump_section { # print STDERR "parameter def '$1' = '$contents'\n"; $name = $1; $parameterdescs{$name} = $contents; + } elsif ($name eq "@\.\.\.") { +# print STDERR "parameter def '...' = '$contents'\n"; + $name = "..."; + $parameterdescs{$name} = $contents; } else { # print STDERR "other section '$name' = '$contents'\n"; if (defined($sections{$name}) && ($sections{$name} ne "")) { @@ -1588,12 +1592,12 @@ sub push_parameter($$$) { if ($type eq "" && $param =~ /\.\.\.$/) { - $type=""; - $parameterdescs{$param} = "variable arguments"; + if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") { + $parameterdescs{$param} = "variable arguments"; + } } elsif ($type eq "" && ($param eq "" or $param eq "void")) { - $type=""; $param="void"; $parameterdescs{void} = "no arguments"; } -- cgit v1.2.3 From 03801553630c4bec6682108800c9b2de64bdbd37 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 1 Dec 2008 13:14:04 -0800 Subject: ntfs: don't fool kernel-doc kernel-doc handles macros now (it has for quite some time), so change the ntfs_debug() macro's kernel-doc to be just before the macro instead of before a phony function prototype. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Randy Dunlap Cc: Anton Altaparmakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ntfs/debug.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/ntfs/debug.h b/fs/ntfs/debug.h index 5e6724c1afd1..2142b1c68b61 100644 --- a/fs/ntfs/debug.h +++ b/fs/ntfs/debug.h @@ -30,7 +30,8 @@ extern int debug_msgs; -#if 0 /* Fool kernel-doc since it doesn't do macros yet */ +extern void __ntfs_debug(const char *file, int line, const char *function, + const char *format, ...) __attribute__ ((format (printf, 4, 5))); /** * ntfs_debug - write a debug level message to syslog * @f: a printf format string containing the message @@ -39,11 +40,6 @@ extern int debug_msgs; * ntfs_debug() writes a DEBUG level message to the syslog but only if the * driver was compiled with -DDEBUG. Otherwise, the call turns into a NOP. */ -static void ntfs_debug(const char *f, ...); -#endif - -extern void __ntfs_debug (const char *file, int line, const char *function, - const char *format, ...) __attribute__ ((format (printf, 4, 5))); #define ntfs_debug(f, a...) \ __ntfs_debug(__FILE__, __LINE__, __func__, f, ##a) -- cgit v1.2.3 From bca404afdc5206c3bb30168315ee8a98a579ec65 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 1 Dec 2008 13:14:05 -0800 Subject: fbdev: fix FB console blanking The commit aef7db4bd5a3b6068dfa05919a3d685199eed116 fixed the problem with recursive locking in fb blanking code if blank is caused by user setting the /sys/class/graphics/fb*/blank. However this broke the fbcon timeout blanking. If you use a driver that defines ->fb_blank operation and at the same time that driver relies on other driver (e.g. backlight or lcd class) to blank the screen, when the fbcon times out and tries to blank the fb, it will call only fb driver blanker and won't notify the other driver. Thus FB output is disabled, but the screen isn't blanked. Restore fbcon blanking and at the same time apply the proper fix for the above problem: if fbcon_blank is called with FBINFO_FLAG_USEREVENT, we are already called through notification from fb_blank, thus we don't have to blank the fb again. Signed-off-by: Dmitry Baryshkov Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index b92947d62ad6..67ff370d80af 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2389,16 +2389,13 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) if (!fbcon_is_inactive(vc, info)) { if (ops->blank_state != blank) { - int ret = 1; - ops->blank_state = blank; fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW); ops->cursor_flash = (!blank); - if (info->fbops->fb_blank) - ret = info->fbops->fb_blank(blank, info); - if (ret) - fbcon_generic_blank(vc, info, blank); + if (!(info->flags & FBINFO_MISC_USEREVENT)) + if (fb_blank(info, blank)) + fbcon_generic_blank(vc, info, blank); } if (!blank) -- cgit v1.2.3 From 307d114441f905e4576871ff28d06408a1af1a7e Mon Sep 17 00:00:00 2001 From: Jarkko Lavinen Date: Mon, 1 Dec 2008 13:14:06 -0800 Subject: i82875p_edac: fix overflow device resource setup When I do "modprobe i82875p_edac" on my Asus P4C800 MB on kernels 2.6.26 or later, the module load fails due to BAR 0 collision. On 2.6.25 the module loads just fine. The overflow device on the MB seems to be hidden and its resources are not allocated at normal PCI bus init. Log shows the missing resource problem: EDAC DEBUG: i82875p_probe1() PCI: 0000:00:06.0 reg 10 32bit mmio: [fecf0000, fecf0fff] pci 0000:00:06.0: device not available because of BAR 0 [0xfecf0000-0xfecf0fff] collisions EDAC i82875p: i82875p_setup_overfl_dev(): Failed to enable overflow device The patch below fixes this by calling pci_bus_assign_resources() after the overflow device is revealed and added to the bus. With this patch I am again able to load and use the module. Signed-off-by: Jarkko Lavinen Cc: Doug Thompson Cc: Jesse Barnes Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/i82875p_edac.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c index e43bdc43a1bf..7f909972fecd 100644 --- a/drivers/edac/i82875p_edac.c +++ b/drivers/edac/i82875p_edac.c @@ -295,6 +295,7 @@ static int i82875p_setup_overfl_dev(struct pci_dev *pdev, "%s(): pci_bus_add_device() Failed\n", __func__); } + pci_bus_assign_resources(dev->bus); } *ovrfl_pdev = dev; -- cgit v1.2.3 From 09a81269c7aadaec3375a7ebd9647acbb72f5a67 Mon Sep 17 00:00:00 2001 From: Jarkko Lavinen Date: Mon, 1 Dec 2008 13:14:08 -0800 Subject: i82875p_edac: fix module remove Fix module removal bugs of i82875p_edac. Also i82975x_edac code seems to have the same module removal bugs as in i82875p_edac. The problems were: 1. In module removal i82875p_remove_one() is never called. Variable i82875p_registered is newer changed from 1, which guarantees i82875p_remove_one() is not called (and even if it were called, it would be called in wrong order). As a result, the edac_mc workque is not stopped and keeps probing. If kernel debugging options are not enabled, user may not notice anything going wrong. if debugging options are enabled and I do "rmmod i82875p_edac", I get: edac debug: edac_pci_workq_function() checking BUG: unable to handle kernel paging request at f882d16f ... call trace: [] ? edac_mc_workq_function+0x55/0x7e [edac_core] [] ? run_workqueue+0xd7/0x1a5 [] ? run_workqueue+0x92/0x1a5 [] ? edac_mc_workq_function+0x0/0x7e [edac_core] [] ? worker_thread+0xb7/0xc3 [] ? autoremove_wake_function+0x0/0x33 [] ? worker_thread+0x0/0xc3 [] ? kthread+0x3b/0x61 [] ? kthread+0x0/0x61 [] ? kernel_thread_helper+0x7/0x10 Fix for this is to get rid of needles variable i82875p_registered altogether and run i82875p_remove_one() *before* pci_unregister_driver(). 2. edac_mc_del_mc() uses mci after freeing mci edac_mc_del_mc() calls calls edac_remove_sysfs_mci_device(). The kobject refcount of mci drops to 0 and mci is freed. After this mci is accessed via debug print and i82875p_remove_one() still uses mci->pvt and tries to free mci again with edac_mc_free(). The fix for this is add kobject_get(&mci->edac_mci_kobj) after edac_mc_alloc(). Then the mci is still available after returning from edac_mc_del_mc() with refcount 1, and mci->pvt is still available. When i82875p_remove_one() finally calls edac_mc_free(), this will cause kobject_put() and mci is released properly. Signed-off-by: Jarkko Lavinen Cc: Doug Thompson Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/i82875p_edac.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c index 7f909972fecd..ebb037b78758 100644 --- a/drivers/edac/i82875p_edac.c +++ b/drivers/edac/i82875p_edac.c @@ -182,8 +182,6 @@ static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has * already registered driver */ -static int i82875p_registered = 1; - static struct edac_pci_ctl_info *i82875p_pci; static void i82875p_get_error_info(struct mem_ctl_info *mci, @@ -410,6 +408,9 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) goto fail0; } + /* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */ + kobject_get(&mci->edac_mci_kobj); + debugf3("%s(): init mci\n", __func__); mci->dev = &pdev->dev; mci->mtype_cap = MEM_FLAG_DDR; @@ -452,6 +453,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) return 0; fail1: + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); fail0: @@ -579,12 +581,11 @@ static void __exit i82875p_exit(void) { debugf3("%s()\n", __func__); + i82875p_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + pci_unregister_driver(&i82875p_driver); - if (!i82875p_registered) { - i82875p_remove_one(mci_pdev); - pci_dev_put(mci_pdev); - } } module_init(i82875p_init); -- cgit v1.2.3 From 9c84ba4e502184d95ab75128d3166f595ea2dea0 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 1 Dec 2008 13:14:08 -0800 Subject: drivers/gpu/drm/i915/i915_irq.c: fix warning drivers/gpu/drm/i915/i915_irq.c: In function 'i915_disable_pipestat': drivers/gpu/drm/i915/i915_irq.c:101: warning: control may reach end of non-void function 'i915_pipestat' being inlined Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/i915_irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index fe3d9cc72bf5..69b9a42da95e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -78,7 +78,7 @@ i915_pipestat(int pipe) return PIPEASTAT; if (pipe == 1) return PIPEBSTAT; - BUG_ON(1); + BUG(); } void -- cgit v1.2.3 From 061e41fdb5047b1fb161e89664057835935ca1d2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 1 Dec 2008 19:59:23 -0800 Subject: Linux 2.6.28-rc7 --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 7b1f2384094f..9a49960f7aad 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc6 -NAME = Killer Bat of Doom +EXTRAVERSION = -rc7 +NAME = Erotic Pickled Herring # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- cgit v1.2.3 From d94762989103b5e29938d8a7b0112e72c4633265 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 1 Dec 2008 23:00:55 +0100 Subject: [MTD] [NAND] drivers/mtd/nand/pasemi_nand.c: Add missing pci_dev_put pci_get_device increments a reference count that should be decremented using pci_dev_put. The semantic patch that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S,S1; position p1,p2,p3; expression E,E1; type T,T1; expression *ptr != NULL; @@ ( if ((x@p1 = pci_get_device(...)) == NULL) S | x@p1 = pci_get_device(...); ) ... when != pci_dev_put(...,(T)x,...) when != if (...) { <+... pci_dev_put(...,(T)x,...) ...+> } when != true x == NULL || ... when != x = E when != E = (T)x when any ( if (x == NULL || ...) S1 | if@p2 (...) { ... when != pci_dev_put(...,(T1)x,...) when != if (...) { <+... pci_dev_put(...,(T1)x,...) ...+> } when != x = E1 when != E1 = (T1)x ( return \(0\|<+...x...+>\|ptr\); | return@p3 ...; ) } ) @ script:python @ p1 << r.p1; p3 << r.p3; @@ print "* file: %s pci_get_device: %s return: %s" % (p1[0].file,p1[0].line,p3[0].line) // Signed-off-by: Julia Lawall Acked-by: Olof Johansson Signed-off-by: David Woodhouse --- drivers/mtd/nand/pasemi_nand.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 75c899039023..9bd6c9ac8443 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -141,6 +141,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, } lpcctl = pci_resource_start(pdev, 0); + pci_dev_put(pdev); if (!request_region(lpcctl, 4, driver_name)) { err = -EBUSY; -- cgit v1.2.3 From 89c223a616cddd9eab792b860f61f99cec53c4e8 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Tue, 18 Nov 2008 20:40:40 +0100 Subject: macfb: Do not overflow fb_fix_screeninfo.id Don't overflow the 16-character fb_fix_screeninfo id string (fixes some console erasing and blanking artifacts). Have the ID default to "Unknown" on machines with no built-in video and no nubus devices. Check for fb_alloc_cmap failure. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/video/macfb.c | 74 ++++++++++++++++++++++++--------------------------- 1 file changed, 35 insertions(+), 39 deletions(-) diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c index b790ddff76f9..ee380d5f3410 100644 --- a/drivers/video/macfb.c +++ b/drivers/video/macfb.c @@ -164,7 +164,6 @@ static struct fb_var_screeninfo macfb_defined = { }; static struct fb_fix_screeninfo macfb_fix = { - .id = "Macintosh ", .type = FB_TYPE_PACKED_PIXELS, .accel = FB_ACCEL_NONE, }; @@ -760,22 +759,22 @@ static int __init macfb_init(void) switch(ndev->dr_hw) { case NUBUS_DRHW_APPLE_MDC: - strcat( macfb_fix.id, "Display Card" ); + strcpy(macfb_fix.id, "Mac Disp. Card"); macfb_setpalette = mdc_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; case NUBUS_DRHW_APPLE_TFB: - strcat( macfb_fix.id, "Toby" ); + strcpy(macfb_fix.id, "Toby"); macfb_setpalette = toby_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; case NUBUS_DRHW_APPLE_JET: - strcat( macfb_fix.id, "Jet"); + strcpy(macfb_fix.id, "Jet"); macfb_setpalette = jet_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; default: - strcat( macfb_fix.id, "Generic NuBus" ); + strcpy(macfb_fix.id, "Generic NuBus"); break; } } @@ -786,21 +785,11 @@ static int __init macfb_init(void) if (!video_is_nubus) switch( mac_bi_data.id ) { - /* These don't have onboard video. Eventually, we may - be able to write separate framebuffer drivers for - them (tobyfb.c, hiresfb.c, etc, etc) */ - case MAC_MODEL_II: - case MAC_MODEL_IIX: - case MAC_MODEL_IICX: - case MAC_MODEL_IIFX: - strcat( macfb_fix.id, "Generic NuBus" ); - break; - /* Valkyrie Quadras */ case MAC_MODEL_Q630: /* I'm not sure about this one */ case MAC_MODEL_P588: - strcat( macfb_fix.id, "Valkyrie built-in" ); + strcpy(macfb_fix.id, "Valkyrie"); macfb_setpalette = valkyrie_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; valkyrie_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -823,7 +812,7 @@ static int __init macfb_init(void) case MAC_MODEL_Q700: case MAC_MODEL_Q900: case MAC_MODEL_Q950: - strcat( macfb_fix.id, "DAFB built-in" ); + strcpy(macfb_fix.id, "DAFB"); macfb_setpalette = dafb_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000); @@ -831,7 +820,7 @@ static int __init macfb_init(void) /* LC II uses the V8 framebuffer */ case MAC_MODEL_LCII: - strcat( macfb_fix.id, "V8 built-in" ); + strcpy(macfb_fix.id, "V8"); macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -843,7 +832,7 @@ static int __init macfb_init(void) case MAC_MODEL_IIVI: case MAC_MODEL_IIVX: case MAC_MODEL_P600: - strcat( macfb_fix.id, "Brazil built-in" ); + strcpy(macfb_fix.id, "Brazil"); macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -860,7 +849,7 @@ static int __init macfb_init(void) case MAC_MODEL_P460: macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "Sonora built-in" ); + strcpy(macfb_fix.id, "Sonora"); v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); break; @@ -871,7 +860,7 @@ static int __init macfb_init(void) case MAC_MODEL_IISI: macfb_setpalette = rbv_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "RBV built-in" ); + strcpy(macfb_fix.id, "RBV"); rbv_cmap_regs = ioremap(DAC_BASE, 0x1000); break; @@ -880,7 +869,7 @@ static int __init macfb_init(void) case MAC_MODEL_C660: macfb_setpalette = civic_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "Civic built-in" ); + strcpy(macfb_fix.id, "Civic"); civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); break; @@ -901,7 +890,7 @@ static int __init macfb_init(void) v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); } - strcat( macfb_fix.id, "LC built-in" ); + strcpy(macfb_fix.id, "LC"); break; /* We think this may be like the LC II */ case MAC_MODEL_CCL: @@ -911,18 +900,18 @@ static int __init macfb_init(void) v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); } - strcat( macfb_fix.id, "Color Classic built-in" ); + strcpy(macfb_fix.id, "Color Classic"); break; /* And we *do* mean "weirdos" */ case MAC_MODEL_TV: - strcat( macfb_fix.id, "Mac TV built-in" ); + strcpy(macfb_fix.id, "Mac TV"); break; /* These don't have colour, so no need to worry */ case MAC_MODEL_SE30: case MAC_MODEL_CLII: - strcat( macfb_fix.id, "Monochrome built-in" ); + strcpy(macfb_fix.id, "Monochrome"); break; /* Powerbooks are particularly difficult. Many of @@ -935,7 +924,7 @@ static int __init macfb_init(void) case MAC_MODEL_PB140: case MAC_MODEL_PB145: case MAC_MODEL_PB170: - strcat( macfb_fix.id, "DDC built-in" ); + strcpy(macfb_fix.id, "DDC"); break; /* Internal is GSC, External (if present) is ViSC */ @@ -945,13 +934,13 @@ static int __init macfb_init(void) case MAC_MODEL_PB180: case MAC_MODEL_PB210: case MAC_MODEL_PB230: - strcat( macfb_fix.id, "GSC built-in" ); + strcpy(macfb_fix.id, "GSC"); break; /* Internal is TIM, External is ViSC */ case MAC_MODEL_PB165C: case MAC_MODEL_PB180C: - strcat( macfb_fix.id, "TIM built-in" ); + strcpy(macfb_fix.id, "TIM"); break; /* Internal is CSC, External is Keystone+Ariel. */ @@ -963,12 +952,12 @@ static int __init macfb_init(void) case MAC_MODEL_PB280C: macfb_setpalette = csc_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "CSC built-in" ); + strcpy(macfb_fix.id, "CSC"); csc_cmap_regs = ioremap(CSC_BASE, 0x1000); break; default: - strcat( macfb_fix.id, "Unknown/Unsupported built-in" ); + strcpy(macfb_fix.id, "Unknown"); break; } @@ -978,16 +967,23 @@ static int __init macfb_init(void) fb_info.pseudo_palette = pseudo_palette; fb_info.flags = FBINFO_DEFAULT; - fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); + err = fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); + if (err) + goto fail_unmap; err = register_framebuffer(&fb_info); - if (!err) - printk("fb%d: %s frame buffer device\n", - fb_info.node, fb_info.fix.id); - else { - iounmap(fb_info.screen_base); - iounmap_macfb(); - } + if (err) + goto fail_dealloc; + + printk("fb%d: %s frame buffer device\n", + fb_info.node, fb_info.fix.id); + return 0; + +fail_dealloc: + fb_dealloc_cmap(&fb_info.cmap); +fail_unmap: + iounmap(fb_info.screen_base); + iounmap_macfb(); return err; } -- cgit v1.2.3 From f9e3326dce0ef117308872cd234b903aa19aa40f Mon Sep 17 00:00:00 2001 From: Michael Schmitz Date: Tue, 2 Dec 2008 20:40:02 +0100 Subject: ide: fix the ide_release_lock imbalance ide_release_lock() spits out lots of: ide_release_lock: bug warnings on Atari Falcon. Fix the ide_release_lock imbalance. Signed-off-by: Michael Schmitz Cc: Geert Uytterhoeven Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 7162d67562af..0be7c4eb11c3 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -967,14 +967,13 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) ide_startstop_t startstop; int loops = 0; - /* for atari only: POSSIBLY BROKEN HERE(?) */ - ide_get_lock(ide_intr, hwgroup); - /* caller must own ide_lock */ BUG_ON(!irqs_disabled()); while (!hwgroup->busy) { hwgroup->busy = 1; + /* for atari only */ + ide_get_lock(ide_intr, hwgroup); drive = choose_drive(hwgroup); if (drive == NULL) { int sleeping = 0; -- cgit v1.2.3 From 6636487e8dc49a1c43fed336bdc4a2f3d7ce6881 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Dec 2008 20:40:03 +0100 Subject: amd74xx: workaround unreliable AltStatus register for nVidia controllers It seems that on some nVidia controllers using AltStatus register can be unreliable so default to Status register if the PCI device is in Compatibility Mode. In order to achieve this: * Add ide_pci_is_in_compatibility_mode() inline helper to . * Add IDE_HFLAG_BROKEN_ALTSTATUS host flag and set it in amd74xx host driver for nVidia controllers in Compatibility Mode. * Teach actual_try_to_identify() and drive_is_ready() about the new flag. This fixes the regression caused by removal of CONFIG_IDEPCI_SHARE_IRQ config option in 2.6.25 and using AltStatus register unconditionally when available (kernel.org bugs #11659 and #10216). [ Moreover for CONFIG_IDEPCI_SHARE_IRQ=y (which is what most people and distributions use) it never worked correctly. ] Thanks to Remy LABENE and Lars Winterfeld for help with debugging the problem. More info at: http://bugzilla.kernel.org/show_bug.cgi?id=11659 http://bugzilla.kernel.org/show_bug.cgi?id=10216 Reported-by: Remy LABENE Tested-by: Remy LABENE Tested-by: Lars Winterfeld Acked-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/amd74xx.c | 11 ++++++++++- drivers/ide/ide-iops.c | 3 ++- drivers/ide/ide-probe.c | 3 ++- include/linux/ide.h | 8 ++++++++ 4 files changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 81ec73134eda..c6bcd3014a29 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c @@ -3,7 +3,7 @@ * IDE driver for Linux. * * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007 Bartlomiej Zolnierkiewicz + * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz * * Based on the work of: * Andre Hedrick @@ -263,6 +263,15 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_ d.udma_mask = ATA_UDMA5; } + /* + * It seems that on some nVidia controllers using AltStatus + * register can be unreliable so default to Status register + * if the device is in Compatibility Mode. + */ + if (dev->vendor == PCI_VENDOR_ID_NVIDIA && + ide_pci_is_in_compatibility_mode(dev)) + d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS; + printk(KERN_INFO "%s %s: UDMA%s controller\n", d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 5d6ba14e211d..142b9573d64c 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -468,7 +468,8 @@ int drive_is_ready (ide_drive_t *drive) * an interrupt with another pci card/device. We make no assumptions * about possible isa-pnp and pci-pnp issues yet. */ - if (hwif->io_ports.ctl_addr) + if (hwif->io_ports.ctl_addr && + (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) stat = hwif->tp_ops->read_altstatus(hwif); else /* Note: this may clear a pending IRQ!! */ diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 1649ea54f76c..c55bdbd22314 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -266,7 +266,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) /* take a deep breath */ msleep(50); - if (io_ports->ctl_addr) { + if (io_ports->ctl_addr && + (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) { a = tp_ops->read_altstatus(hwif); s = tp_ops->read_status(hwif); if ((a ^ s) & ~ATA_IDX) diff --git a/include/linux/ide.h b/include/linux/ide.h index 54525be4b5f8..010fb26a1579 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1296,6 +1296,13 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o #define ide_pci_register_driver(d) pci_register_driver(d) #endif +static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev) +{ + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) + return 1; + return 0; +} + void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, hw_regs_t *, hw_regs_t **); void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); @@ -1375,6 +1382,7 @@ enum { IDE_HFLAG_IO_32BIT = (1 << 24), /* unmask IRQs */ IDE_HFLAG_UNMASK_IRQS = (1 << 25), + IDE_HFLAG_BROKEN_ALTSTATUS = (1 << 26), /* serialize ports if DMA is possible (for sl82c105) */ IDE_HFLAG_SERIALIZE_DMA = (1 << 27), /* force host out of "simplex" mode */ -- cgit v1.2.3 From c7b997b372e8b6e7ee8d91696c74a556754f5fdb Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Dec 2008 20:40:03 +0100 Subject: ide: add SAMSUNG SP0822N with firmware WA100-10 to ivb_list[] Should fix kernel.org bug #10225: http://bugzilla.kernel.org/show_bug.cgi?id=10225 Reported-by: Matthias B. Cc: Alan Cox Acked-by: Sergei Shtyltov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 142b9573d64c..6f57de85dcd9 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -611,6 +611,7 @@ static const struct drive_list_entry ivb_list[] = { { "TSSTcorp CDDVDW SH-S202N" , "SB01" }, { "TSSTcorp CDDVDW SH-S202H" , "SB00" }, { "TSSTcorp CDDVDW SH-S202H" , "SB01" }, + { "SAMSUNG SP0822N" , "WA100-10" }, { NULL , NULL } }; -- cgit v1.2.3 From e9eb8388306364295308132265c00bea685f409f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Dec 2008 20:40:03 +0100 Subject: ide: respect current DMA setting during resume Respect current DMA setting during resume, otherwise PIO timings may get destroyed if host uses shared PIO/MWDMA timings. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 0be7c4eb11c3..702a627b0083 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -204,10 +204,8 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * */ if (drive->hwif->dma_ops == NULL) break; - /* - * TODO: respect IDE_DFLAG_USING_DMA - */ - ide_set_dma(drive); + if (drive->dev_flags & IDE_DFLAG_USING_DMA) + ide_set_dma(drive); break; } -- cgit v1.2.3 From 6b7d8fc36272169d1d07a07174f2c8a7909c025e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Dec 2008 20:40:03 +0100 Subject: ide: fix build for DEBUG_PM Also while at it: * Drop unused arguments from ide_complete_power_step(). * Move DEBUG_PM printk() from ide_end_drive_cmd() to ide_complete_power_step(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 702a627b0083..7d275b2af3eb 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -132,10 +132,14 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) } EXPORT_SYMBOL(ide_end_request); -static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error) +static void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { struct request_pm_state *pm = rq->data; +#ifdef DEBUG_PM + printk(KERN_INFO "%s: complete_power_step(step: %d)\n", + drive->name, pm->pm_step); +#endif if (drive->media != ide_disk) return; @@ -172,7 +176,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * /* Not supported? Switch to next step now. */ if (ata_id_flush_enabled(drive->id) == 0 || (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) { - ide_complete_power_step(drive, rq, 0, 0); + ide_complete_power_step(drive, rq); return ide_stopped; } if (ata_id_flush_ext_enabled(drive->id)) @@ -191,7 +195,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * if (drive->media != ide_disk) pm->pm_step = IDE_PM_RESTORE_DMA; else - ide_complete_power_step(drive, rq, 0, 0); + ide_complete_power_step(drive, rq); return ide_stopped; case IDE_PM_IDLE: /* Resume step 2 (idle) */ args->tf.command = ATA_CMD_IDLEIMMEDIATE; @@ -320,11 +324,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) } } else if (blk_pm_request(rq)) { struct request_pm_state *pm = rq->data; -#ifdef DEBUG_PM - printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n", - drive->name, rq->pm->pm_step, stat, err); -#endif - ide_complete_power_step(drive, rq, stat, err); + + ide_complete_power_step(drive, rq); if (pm->pm_step == IDE_PM_COMPLETED) ide_complete_pm_request(drive, rq); return; @@ -802,7 +803,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) struct request_pm_state *pm = rq->data; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", - drive->name, rq->pm->pm_step); + drive->name, pm->pm_step); #endif startstop = ide_start_power_step(drive, rq); if (startstop == ide_stopped && -- cgit v1.2.3 From a3663801b1bb1b6f6e2be5198cc81bc16f1558fd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Dec 2008 20:40:04 +0100 Subject: ide: remove dead code from drive_is_ready() We guarantee 400ns delay at the time of issuing the command. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 6f57de85dcd9..c41c3b9b6f02 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -457,11 +457,6 @@ int drive_is_ready (ide_drive_t *drive) if (drive->waiting_for_dma) return hwif->dma_ops->dma_test_irq(drive); -#if 0 - /* need to guarantee 400ns since last command was issued */ - udelay(1); -#endif - /* * We do a passive status test under shared PCI interrupts on * cards that truly share the ATA side interrupt, but may also share -- cgit v1.2.3 From 95964018d53f479529dfdc2b46fe30c0a14a00e0 Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Tue, 2 Dec 2008 20:40:04 +0100 Subject: alim15x3: fix sparse warning Fix this sparse warning: drivers/ide/alim15x3.c:594:2: warning: returning void-valued expression Signed-off-by: Hannes Eder Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/alim15x3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index e56c7b72f9e2..45d2356bb725 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -591,7 +591,7 @@ static int __init ali15x3_ide_init(void) static void __exit ali15x3_ide_exit(void) { - return pci_unregister_driver(&alim15x3_pci_driver); + pci_unregister_driver(&alim15x3_pci_driver); } module_init(ali15x3_ide_init); -- cgit v1.2.3 From ae4e1434a03207661b4331ea715d3f18cb479123 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 2 Dec 2008 20:58:26 +0100 Subject: m68k: Update defconfigs for 2.6.28-rc7 Signed-off-by: Geert Uytterhoeven --- arch/m68k/configs/amiga_defconfig | 126 ++++++++++++++++++--------------- arch/m68k/configs/apollo_defconfig | 115 ++++++++++++++++++------------- arch/m68k/configs/atari_defconfig | 130 ++++++++++++++++++++--------------- arch/m68k/configs/bvme6000_defconfig | 112 +++++++++++++++++------------- arch/m68k/configs/hp300_defconfig | 115 ++++++++++++++++++------------- arch/m68k/configs/mac_defconfig | 125 ++++++++++++++++++--------------- arch/m68k/configs/multi_defconfig | 129 +++++++++++++++++++--------------- arch/m68k/configs/mvme147_defconfig | 112 +++++++++++++++++------------- arch/m68k/configs/mvme16x_defconfig | 112 +++++++++++++++++------------- arch/m68k/configs/q40_defconfig | 125 +++++++++++++++++++-------------- arch/m68k/configs/sun3_defconfig | 124 +++++++++++++++++++-------------- arch/m68k/configs/sun3x_defconfig | 115 ++++++++++++++++++------------- 12 files changed, 828 insertions(+), 612 deletions(-) diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 8bd61a640fc9..23597beb66c1 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:00 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:42 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set CONFIG_AMIGA=y # CONFIG_ATARI is not set # CONFIG_MAC is not set @@ -148,19 +138,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_ZORRO=y @@ -212,7 +204,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -262,13 +253,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -282,19 +274,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -302,20 +297,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -323,8 +318,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -337,9 +332,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -351,16 +346,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -387,6 +382,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -410,19 +406,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -470,21 +455,20 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # -CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -609,8 +593,12 @@ CONFIG_APNE=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -763,11 +751,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -777,6 +765,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -802,6 +791,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -829,6 +819,8 @@ CONFIG_FB_FM2=y # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -852,12 +844,19 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_DMASOUND_PAULA=m CONFIG_DMASOUND=m CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -867,6 +866,8 @@ CONFIG_HIDRAW=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -883,8 +884,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -895,6 +897,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -906,6 +909,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -944,6 +948,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -986,6 +991,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1059,7 +1065,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1067,6 +1079,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -1077,10 +1090,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1154,14 +1169,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index c41b854c0284..935108d115a0 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:01 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:43 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set # CONFIG_AMIGA is not set # CONFIG_ATARI is not set # CONFIG_MAC is not set @@ -148,19 +138,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_HEARTBEAT=y @@ -210,7 +202,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -260,13 +251,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -280,19 +272,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -300,20 +295,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -321,8 +316,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -335,9 +330,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -349,16 +344,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -385,6 +380,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -408,19 +404,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -458,6 +443,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -540,6 +526,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -609,6 +598,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -663,11 +653,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -677,6 +667,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -702,6 +693,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y # CONFIG_FB_CFB_COPYAREA is not set CONFIG_FB_CFB_IMAGEBLIT=y @@ -724,6 +716,8 @@ CONFIG_FB_APOLLO=y # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -750,6 +744,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -758,6 +758,8 @@ CONFIG_HIDRAW=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -773,8 +775,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -785,6 +788,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -796,6 +800,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -834,6 +839,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -877,6 +883,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -949,7 +956,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -957,6 +970,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -967,10 +981,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1044,14 +1060,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 654c5acb9e86..a594a1d47b62 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:02 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:44 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set # CONFIG_AMIGA is not set CONFIG_ATARI=y # CONFIG_MAC is not set @@ -148,19 +138,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_STRAM_PROC=y @@ -208,7 +200,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -258,13 +249,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -278,19 +270,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -298,20 +293,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -319,8 +314,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -333,9 +328,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -347,16 +342,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -383,6 +378,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -406,19 +402,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -462,21 +447,20 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # -CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -565,12 +549,15 @@ CONFIG_EQUALIZER=m CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y CONFIG_ATARILANCE=m # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NET_POCKET is not set # CONFIG_NETDEV_1000 is not set @@ -644,6 +631,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set CONFIG_MOUSE_ATARI=m @@ -706,11 +694,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -720,6 +708,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -745,6 +734,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -768,6 +758,8 @@ CONFIG_FB_ATARI=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -790,12 +782,19 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_DMASOUND_ATARI=m CONFIG_DMASOUND=m CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -805,6 +804,8 @@ CONFIG_HIDRAW=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -821,10 +822,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4DEV_FS=y -# CONFIG_EXT4DEV_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -CONFIG_JBD2=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -835,6 +835,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -846,6 +847,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -884,6 +886,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -925,6 +928,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -998,7 +1002,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1006,6 +1016,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -1016,10 +1027,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1093,14 +1106,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 2e44af0fe54a..d3d9814a91de 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:03 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:45 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set # CONFIG_AMIGA is not set # CONFIG_ATARI is not set # CONFIG_MAC is not set @@ -151,19 +141,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y @@ -212,7 +204,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -262,13 +253,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -282,19 +274,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -302,20 +297,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -323,8 +318,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -337,9 +332,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -351,16 +346,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -387,6 +382,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -410,19 +406,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -460,6 +445,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -545,6 +531,9 @@ CONFIG_BVME6000_NET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -614,6 +603,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -668,11 +658,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -682,6 +672,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -721,6 +712,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -729,6 +726,8 @@ CONFIG_HIDRAW=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -744,8 +743,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -756,6 +756,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -767,6 +768,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -805,6 +807,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -848,6 +851,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -921,7 +925,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -929,6 +939,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -939,10 +950,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1016,14 +1029,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=m -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 3570fc89b089..5556ef088d04 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:04 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:46 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set # CONFIG_AMIGA is not set # CONFIG_ATARI is not set # CONFIG_MAC is not set @@ -149,19 +139,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_HEARTBEAT=y @@ -211,7 +203,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -261,13 +252,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -281,19 +273,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -301,20 +296,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -322,8 +317,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -336,9 +331,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -350,16 +345,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -386,6 +381,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -409,19 +405,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -459,6 +444,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -542,6 +528,9 @@ CONFIG_HPLANCE=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -613,6 +602,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -673,11 +663,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -687,6 +677,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -712,6 +703,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set CONFIG_FB_CFB_IMAGEBLIT=y @@ -734,6 +726,8 @@ CONFIG_FB_HP300=y # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -760,6 +754,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -768,6 +768,8 @@ CONFIG_HIDRAW=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -781,8 +783,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -793,6 +796,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -804,6 +808,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -842,6 +847,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -885,6 +891,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -957,7 +964,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -965,6 +978,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -975,10 +989,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1052,14 +1068,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index db6e8822594a..c6de25724a25 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:06 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:47 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set # CONFIG_AMIGA is not set # CONFIG_ATARI is not set CONFIG_MAC=y @@ -150,19 +140,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # CONFIG_HEARTBEAT is not set @@ -209,7 +201,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -259,13 +250,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -279,19 +271,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -299,20 +294,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -320,8 +315,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -334,9 +329,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -348,16 +343,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -384,6 +379,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -410,19 +406,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -460,21 +445,20 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # -CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -581,6 +565,9 @@ CONFIG_MACMACE=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -650,6 +637,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -706,11 +694,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -720,6 +708,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -745,6 +734,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -768,6 +758,8 @@ CONFIG_FB_MAC=y # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -796,6 +788,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -804,6 +802,8 @@ CONFIG_HIDRAW=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -820,8 +820,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -832,6 +833,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -843,6 +845,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -881,6 +884,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -923,6 +927,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -996,7 +1001,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1004,6 +1015,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -1014,10 +1026,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1091,14 +1105,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 1a806102b999..70693588031e 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:07 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:48 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set CONFIG_AMIGA=y CONFIG_ATARI=y CONFIG_MAC=y @@ -154,19 +144,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_ZORRO=y @@ -222,7 +214,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -272,13 +263,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -292,19 +284,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -312,20 +307,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -333,8 +328,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -347,9 +342,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -361,16 +356,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -397,6 +392,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -424,19 +420,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -486,21 +471,20 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # -CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -629,7 +613,7 @@ CONFIG_VETH=m # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y CONFIG_ARIADNE=m CONFIG_A2065=m CONFIG_HYDRA=m @@ -657,8 +641,12 @@ CONFIG_NE2000=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -735,6 +723,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_INPORT is not set @@ -832,11 +821,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -846,6 +835,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -871,6 +861,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -905,6 +896,8 @@ CONFIG_FB_HP300=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -930,6 +923,7 @@ CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_MAC_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_DMASOUND_ATARI=m CONFIG_DMASOUND_PAULA=m CONFIG_DMASOUND_Q40=m @@ -938,6 +932,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -947,6 +947,8 @@ CONFIG_HIDRAW=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -973,10 +975,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4DEV_FS=y -# CONFIG_EXT4DEV_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -CONFIG_JBD2=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -987,6 +988,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -998,6 +1000,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1036,6 +1039,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1079,6 +1083,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1156,7 +1161,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1164,6 +1175,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -1174,10 +1186,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1251,14 +1265,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index cacb5aef6a37..52d42715bd0b 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:08 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:50 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set # CONFIG_AMIGA is not set # CONFIG_ATARI is not set # CONFIG_MAC is not set @@ -151,19 +141,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y @@ -212,7 +204,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -262,13 +253,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -282,19 +274,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -302,20 +297,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -323,8 +318,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -337,9 +332,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -351,16 +346,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -387,6 +382,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -410,19 +406,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -460,6 +445,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -544,6 +530,9 @@ CONFIG_MVME147_NET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -613,6 +602,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -667,11 +657,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -681,6 +671,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -720,6 +711,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -728,6 +725,8 @@ CONFIG_HIDRAW=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -743,8 +742,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -755,6 +755,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -766,6 +767,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -804,6 +806,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -847,6 +850,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -920,7 +924,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -928,6 +938,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -938,10 +949,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1015,14 +1028,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index a183e25e348d..3403ed2eda79 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:09 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:51 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set # CONFIG_AMIGA is not set # CONFIG_ATARI is not set # CONFIG_MAC is not set @@ -151,19 +141,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y @@ -212,7 +204,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -262,13 +253,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -282,19 +274,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -302,20 +297,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -323,8 +318,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -337,9 +332,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -351,16 +346,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -387,6 +382,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -410,19 +406,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -460,6 +445,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -545,6 +531,9 @@ CONFIG_MVME16x_NET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -614,6 +603,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -668,11 +658,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -682,6 +672,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -721,6 +712,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -729,6 +726,8 @@ CONFIG_HIDRAW=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -745,8 +744,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -757,6 +757,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -768,6 +769,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -806,6 +808,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -849,6 +852,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -922,7 +926,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -930,6 +940,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -940,10 +951,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1017,14 +1030,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 72eaff0776b8..3459c594194b 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:10 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:52 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set # CONFIG_AMIGA is not set # CONFIG_ATARI is not set # CONFIG_MAC is not set @@ -148,19 +138,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_HEARTBEAT=y @@ -209,7 +201,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -259,13 +250,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -279,19 +271,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -299,20 +294,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -320,8 +315,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -334,9 +329,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -348,16 +343,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -384,6 +379,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -407,19 +403,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -458,21 +443,20 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # -CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -585,8 +569,12 @@ CONFIG_NE2000=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_CS89x0 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -656,6 +644,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_INPORT is not set @@ -717,11 +706,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -731,6 +720,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -756,6 +746,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -778,6 +769,8 @@ CONFIG_FB_Q40=y # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -800,12 +793,19 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_DMASOUND_Q40=m CONFIG_DMASOUND=m CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -814,6 +814,8 @@ CONFIG_HIDRAW=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -827,8 +829,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -839,6 +842,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -850,6 +854,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -888,6 +893,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -930,6 +936,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1002,7 +1009,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1010,6 +1023,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -1020,10 +1034,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1097,14 +1113,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index cb62b96d766e..f404917429fa 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:11 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:53 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y CONFIG_NO_DMA=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,10 +105,19 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # +# CONFIG_AMIGA is not set +# CONFIG_ATARI is not set +# CONFIG_MAC is not set +# CONFIG_APOLLO is not set +# CONFIG_VME is not set +# CONFIG_HP300 is not set +# CONFIG_SUN3X is not set +# CONFIG_Q40 is not set CONFIG_SUN3=y # @@ -137,19 +136,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y @@ -198,7 +199,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -248,13 +248,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -268,19 +269,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -288,20 +292,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -309,8 +313,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -323,9 +327,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -337,16 +341,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -373,6 +377,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -396,19 +401,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -446,6 +440,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -531,6 +526,9 @@ CONFIG_SUN3_82586=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -599,6 +597,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -654,10 +653,6 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set -# -# Sonics Silicon Backplane -# - # # Multifunction device drivers # @@ -665,6 +660,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -690,6 +686,7 @@ CONFIG_GEN_RTC_X=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set @@ -711,6 +708,8 @@ CONFIG_FB=y # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -737,6 +736,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -744,6 +749,8 @@ CONFIG_HIDRAW=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -757,8 +764,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -769,6 +777,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -780,6 +789,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -818,6 +828,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -861,6 +872,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -934,7 +946,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -942,6 +960,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -952,10 +971,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1029,14 +1050,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 04b4363a7050..4d8a1e84e39f 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc6 -# Wed Sep 10 09:02:12 2008 +# Linux kernel version: 2.6.28-rc7 +# Tue Dec 2 20:27:54 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_IOMAP=y CONFIG_NO_IOPORT=y # CONFIG_NO_DMA is not set -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform dependent setup # -# CONFIG_SUN3 is not set # CONFIG_AMIGA is not set # CONFIG_ATARI is not set # CONFIG_MAC is not set @@ -148,19 +138,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # General setup # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y @@ -209,7 +201,6 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -259,13 +250,14 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -279,19 +271,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -299,20 +294,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -320,8 +315,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -334,9 +329,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -348,16 +343,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -384,6 +379,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -407,19 +403,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -457,6 +442,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -541,6 +527,9 @@ CONFIG_SUN3LANCE=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -610,6 +599,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -664,11 +654,11 @@ CONFIG_GEN_RTC_X=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -678,6 +668,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -703,6 +694,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set @@ -724,6 +716,8 @@ CONFIG_FB=y # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -750,6 +744,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -758,6 +758,8 @@ CONFIG_HIDRAW=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -771,8 +773,9 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -783,6 +786,7 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -794,6 +798,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -832,6 +837,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -875,6 +881,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -948,7 +955,13 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -956,6 +969,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -966,10 +980,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1043,14 +1059,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y -- cgit v1.2.3 From 82676d76252680fc035247fd4cfdb07ffce5db52 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Thu, 27 Nov 2008 06:21:03 -1100 Subject: [ARM] Orion: fix bug in pcie configuration cycle function field mask The function field is 3 bits. Signed-off-by: Saeed Bishara Signed-off-by: Nicolas Pitre --- arch/arm/plat-orion/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index 883902fead89..d41d41d78ad9 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -35,7 +35,7 @@ #define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) #define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) #define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) -#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8) +#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8) #define PCIE_CONF_DATA_OFF 0x18fc #define PCIE_MASK_OFF 0x1910 #define PCIE_CTRL_OFF 0x1a00 -- cgit v1.2.3 From 1b79cd04fab80be61dcd2732e2423aafde9a4c1c Mon Sep 17 00:00:00 2001 From: "Junjiro R. Okajima" Date: Tue, 2 Dec 2008 10:31:46 -0800 Subject: nfsd: fix vm overcommit crash fix #2 The previous patch from Alan Cox ("nfsd: fix vm overcommit crash", commit 731572d39fcd3498702eda4600db4c43d51e0b26) fixed the problem where knfsd crashes on exported shmemfs objects and strict overcommit is set. But the patch forgot supporting the case when CONFIG_SECURITY is disabled. This patch copies a part of his fix which is mainly for detecting a bug earlier. Acked-by: James Morris Signed-off-by: Alan Cox Signed-off-by: Junjiro R. Okajima Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/security.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/include/linux/security.h b/include/linux/security.h index c13f1cec9abb..e3d4ecda2673 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1818,17 +1818,21 @@ static inline int security_settime(struct timespec *ts, struct timezone *tz) static inline int security_vm_enough_memory(long pages) { + WARN_ON(current->mm == NULL); return cap_vm_enough_memory(current->mm, pages); } -static inline int security_vm_enough_memory_kern(long pages) +static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages) { - return cap_vm_enough_memory(current->mm, pages); + WARN_ON(mm == NULL); + return cap_vm_enough_memory(mm, pages); } -static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages) +static inline int security_vm_enough_memory_kern(long pages) { - return cap_vm_enough_memory(mm, pages); + /* If current->mm is a kernel thread then we will pass NULL, + for this specific case that is fine */ + return cap_vm_enough_memory(current->mm, pages); } static inline int security_bprm_alloc(struct linux_binprm *bprm) -- cgit v1.2.3 From f1d0b063d993527754f062c589b73f125024d216 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 2 Dec 2008 10:31:50 -0800 Subject: bdi: register sysfs bdi device only once per queue Devices which share the same queue, like floppies and mtd devices, get registered multiple times in the bdi interface, but bdi accounts only the last registered device of the devices sharing one queue. On remove, all earlier registered devices leak, stay around in sysfs, and cause "duplicate filename" errors if the devices are re-created. This prevents the creation of multiple bdi interfaces per queue, and the bdi device will carry the dev_t name of the block device which is the first one registered, of the pool of devices using the same queue. [akpm@linux-foundation.org: add a WARN_ON so we know which drivers are misbehaving] Tested-by: Peter Korsgaard Acked-by: Peter Zijlstra Signed-off-by: Kay Sievers Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/backing-dev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/backing-dev.c b/mm/backing-dev.c index f2e574dbc300..2a56124dbc28 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -176,6 +176,9 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent, int ret = 0; struct device *dev; + if (WARN_ON(bdi->dev)) + goto exit; + va_start(args, fmt); dev = device_create_vargs(bdi_class, parent, MKDEV(0, 0), bdi, fmt, args); va_end(args); -- cgit v1.2.3 From 9ff473b9a72942c5ac0ad35607cae28d8d59ed7a Mon Sep 17 00:00:00 2001 From: Rik van Riel Date: Tue, 2 Dec 2008 10:31:52 -0800 Subject: vmscan: evict streaming IO first Count the insertion of new pages in the statistics used to drive the pageout scanning code. This should help the kernel quickly evict streaming file IO. We count on the fact that new file pages start on the inactive file LRU and new anonymous pages start on the active anon list. This means streaming file IO will increment the recent scanned file statistic, while leaving the recent rotated file statistic alone, driving pageout scanning to the file LRUs. Pageout activity does its own list manipulation. Signed-off-by: Rik van Riel Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Tested-by: Gene Heskett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swap.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/mm/swap.c b/mm/swap.c index 2152e48a7b8f..2881987603eb 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -445,6 +445,7 @@ void ____pagevec_lru_add(struct pagevec *pvec, enum lru_list lru) for (i = 0; i < pagevec_count(pvec); i++) { struct page *page = pvec->pages[i]; struct zone *pagezone = page_zone(page); + int file; if (pagezone != zone) { if (zone) @@ -456,8 +457,12 @@ void ____pagevec_lru_add(struct pagevec *pvec, enum lru_list lru) VM_BUG_ON(PageUnevictable(page)); VM_BUG_ON(PageLRU(page)); SetPageLRU(page); - if (is_active_lru(lru)) + file = is_file_lru(lru); + zone->recent_scanned[file]++; + if (is_active_lru(lru)) { SetPageActive(page); + zone->recent_rotated[file]++; + } add_page_to_lru_list(zone, page, lru); } if (zone) -- cgit v1.2.3 From 7a0d7940e7c7c143520e38900ddd4e217d3c6640 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 2 Dec 2008 13:37:01 -0600 Subject: powerpc: Use physical cpu id when setting the processor affinity In the CONFIG_SMP case the irq_choose_cpu() code was returning back a logical cpu id not the physical id. We were writing that directly into the HW register. We need to be calling get_hard_smp_processor_id() so irq_choose_cpu() always returns a physical cpu id. Signed-off-by: Kumar Gala Signed-off-by: Linus Torvalds --- arch/powerpc/sysdev/mpic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index b24e1d085557..1890fb085cde 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -600,7 +600,7 @@ static int irq_choose_cpu(unsigned int virt_irq) cpuid = first_cpu(tmp); } - return cpuid; + return get_hard_smp_processor_id(cpuid); } #else static int irq_choose_cpu(unsigned int virt_irq) -- cgit v1.2.3 From 026bde120a161d9035502a47dd311bd572f6d31f Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 2 Dec 2008 08:06:01 -0600 Subject: sgi-gru: call fs_initcall() if statically linked If xpc.ko and gru.ko are both statically linked into the kernel, then xpc_init() can get called before gru_init() and make a call to one of the gru's exported functions before the gru has initialized itself. The end result is a NULL dereference. Signed-off-by: Dean Nelson Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/grufile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 5c027b6b4e5a..650983806392 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -481,7 +481,7 @@ struct vm_operations_struct gru_vm_ops = { .fault = gru_fault, }; -module_init(gru_init); +fs_initcall(gru_init); module_exit(gru_exit); module_param(gru_options, ulong, 0644); -- cgit v1.2.3 From 1122b19b8f4da2ee6d6b21780f86bea7957f641e Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Tue, 2 Dec 2008 14:38:09 +0000 Subject: MN10300: Fix application of kernel module relocations This fixes the MN10300 kernel module linking to match the toolchain. RELA relocs don't use the value at the location being relocated. This has been working because the tools always leave the value at the target location cleared. Signed-off-by: Mark Salter Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/module.c | 35 +++++++---------------------------- 1 file changed, 7 insertions(+), 28 deletions(-) diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c index 8fa36893df7a..6b287f2e8e84 100644 --- a/arch/mn10300/kernel/module.c +++ b/arch/mn10300/kernel/module.c @@ -1,6 +1,6 @@ /* MN10300 Kernel module helper routines * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2007, 2008 Red Hat, Inc. All Rights Reserved. * Written by Mark Salter (msalter@redhat.com) * - Derived from arch/i386/kernel/module.c * @@ -64,21 +64,6 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, return 0; } -static uint32_t reloc_get16(uint8_t *p) -{ - return p[0] | (p[1] << 8); -} - -static uint32_t reloc_get24(uint8_t *p) -{ - return reloc_get16(p) | (p[2] << 16); -} - -static uint32_t reloc_get32(uint8_t *p) -{ - return reloc_get16(p) | (reloc_get16(p+2) << 16); -} - static void reloc_put16(uint8_t *p, uint32_t val) { p[0] = val & 0xff; @@ -144,25 +129,19 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, relocation = sym->st_value + rel[i].r_addend; switch (ELF32_R_TYPE(rel[i].r_info)) { - /* for the first four relocation types, we add the - * adjustment into the value at the location given */ + /* for the first four relocation types, we simply + * store the adjustment at the location given */ case R_MN10300_32: - value = reloc_get32(location); - value += relocation; - reloc_put32(location, value); + reloc_put32(location, relocation); break; case R_MN10300_24: - value = reloc_get24(location); - value += relocation; - reloc_put24(location, value); + reloc_put24(location, relocation); break; case R_MN10300_16: - value = reloc_get16(location); - value += relocation; - reloc_put16(location, value); + reloc_put16(location, relocation); break; case R_MN10300_8: - *location += relocation; + *location = relocation; break; /* for the next three relocation types, we write the -- cgit v1.2.3 From 2434bbb30e79468c49cff3cff6005236f55ed188 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 30 Nov 2008 18:53:40 +0000 Subject: powerpc: Fix dma_map_sg() cache flushing on non coherent platforms On PowerPC 4xx or other non cache-coherent platforms, we lost the appropriate cache flushing in dma_map_sg() when merging the 32 and 64-bit DMA code (commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d, "powerpc: Merge 32 and 64-bit dma code"). This restores it. Signed-off-by: Benjamin Herrenschmidt Acked-by: Becky Bruce Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 1562daf8839a..3a6eaa876ee1 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -75,6 +75,7 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl, for_each_sg(sgl, sg, nents, i) { sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev); sg->dma_length = sg->length; + __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); } return nents; -- cgit v1.2.3 From d5654efd3ff1cd0baa935a0c9a5d89862f07d009 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 3 Dec 2008 00:27:18 -0800 Subject: xfrm: Fix kernel panic when flush and dump SPD entries After flush the SPD entries, dump the SPD entries will cause kernel painc. Used the following commands to reproduct: - echo 'spdflush;' | setkey -c - echo 'spdadd 3ffe:501:ffff:ff01::/64 3ffe:501:ffff:ff04::/64 any -P out ipsec \ ah/tunnel/3ffe:501:ffff:ff00:200:ff:fe00:b0b0-3ffe:501:ffff:ff02:200:ff:fe00:a1a1/require;\ spddump;' | setkey -c - echo 'spdflush; spddump;' | setkey -c - echo 'spdadd 3ffe:501:ffff:ff01::/64 3ffe:501:ffff:ff04::/64 any -P out ipsec \ ah/tunnel/3ffe:501:ffff:ff00:200:ff:fe00:b0b0-3ffe:501:ffff:ff02:200:ff:fe00:a1a1/require;\ spddump;' | setkey -c This is because when flush the SPD entries, the SPD entry is not remove from the list. This patch fix the problem by remove the SPD entry from the list. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 058f04f54b90..fb216c9adf86 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -817,6 +817,7 @@ int xfrm_policy_flush(u8 type, struct xfrm_audit *audit_info) continue; hlist_del(&pol->bydst); hlist_del(&pol->byidx); + list_del(&pol->walk.all); write_unlock_bh(&xfrm_policy_lock); xfrm_audit_policy_delete(pol, 1, audit_info->loginuid, -- cgit v1.2.3 From efba01803c8570bab11d0d6188a630231d0ddccf Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 3 Dec 2008 00:36:15 -0800 Subject: bnx2: Add workaround to handle missed MSI. The bnx2 chips do not support per MSI vector masking. On 5706/5708, new MSI address/data are stored only when the MSI enable bit is toggled. As a result, SMP affinity no longer works in the latest kernel. A more serious problem is that the driver will no longer receive interrupts when the MSI receiving CPU goes offline. The workaround in this patch only addresses the problem of CPU going offline. When that happens, the driver's timer function will detect that it is making no forward progress on pending interrupt events and will recover from it. Eric Dumazet reported the problem. We also found that if an interrupt is internally asserted while MSI and INTA are disabled, the chip will end up in the same state after MSI is re-enabled. The same workaround is needed for this problem. Signed-off-by: Michael Chan Tested-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 35 ++++++++++++++++++++++++++++++++--- drivers/net/bnx2.h | 6 ++++++ 2 files changed, 38 insertions(+), 3 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index d07e3f148951..a1a3d0e5d2b4 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -3144,6 +3144,28 @@ bnx2_has_work(struct bnx2_napi *bnapi) return 0; } +static void +bnx2_chk_missed_msi(struct bnx2 *bp) +{ + struct bnx2_napi *bnapi = &bp->bnx2_napi[0]; + u32 msi_ctrl; + + if (bnx2_has_work(bnapi)) { + msi_ctrl = REG_RD(bp, BNX2_PCICFG_MSI_CONTROL); + if (!(msi_ctrl & BNX2_PCICFG_MSI_CONTROL_ENABLE)) + return; + + if (bnapi->last_status_idx == bp->idle_chk_status_idx) { + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl & + ~BNX2_PCICFG_MSI_CONTROL_ENABLE); + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl); + bnx2_msi(bp->irq_tbl[0].vector, bnapi); + } + } + + bp->idle_chk_status_idx = bnapi->last_status_idx; +} + static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi) { struct status_block *sblk = bnapi->status_blk.msi; @@ -3218,14 +3240,15 @@ static int bnx2_poll(struct napi_struct *napi, int budget) work_done = bnx2_poll_work(bp, bnapi, work_done, budget); - if (unlikely(work_done >= budget)) - break; - /* bnapi->last_status_idx is used below to tell the hw how * much work has been processed, so we must read it before * checking for more work. */ bnapi->last_status_idx = sblk->status_idx; + + if (unlikely(work_done >= budget)) + break; + rmb(); if (likely(!bnx2_has_work(bnapi))) { netif_rx_complete(bp->dev, napi); @@ -4570,6 +4593,8 @@ bnx2_init_chip(struct bnx2 *bp) for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) bp->bnx2_napi[i].last_status_idx = 0; + bp->idle_chk_status_idx = 0xffff; + bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; /* Set up how to generate a link change interrupt. */ @@ -5718,6 +5743,10 @@ bnx2_timer(unsigned long data) if (atomic_read(&bp->intr_sem) != 0) goto bnx2_restart_timer; + if ((bp->flags & (BNX2_FLAG_USING_MSI | BNX2_FLAG_ONE_SHOT_MSI)) == + BNX2_FLAG_USING_MSI) + bnx2_chk_missed_msi(bp); + bnx2_send_heart_beat(bp); bp->stats_blk->stat_FwRxDrop = diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 617d95340160..0b032c3c7b61 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -378,6 +378,9 @@ struct l2_fhdr { * pci_config_l definition * offset: 0000 */ +#define BNX2_PCICFG_MSI_CONTROL 0x00000058 +#define BNX2_PCICFG_MSI_CONTROL_ENABLE (1L<<16) + #define BNX2_PCICFG_MISC_CONFIG 0x00000068 #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) @@ -6863,6 +6866,9 @@ struct bnx2 { u8 num_tx_rings; u8 num_rx_rings; + + u32 idle_chk_status_idx; + }; #define REG_RD(bp, offset) \ -- cgit v1.2.3 From d25830e5507f6bc815f5dd7e2eb65f172e878a2b Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 3 Dec 2008 00:37:04 -0800 Subject: netlabel: Fix a potential NULL pointer dereference Fix a potential NULL pointer dereference seen when trying to remove a static label configuration with an invalid address/mask combination. Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- net/netlabel/netlabel_unlabeled.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c index e8a5c32b0f10..90c8506a0aac 100644 --- a/net/netlabel/netlabel_unlabeled.c +++ b/net/netlabel/netlabel_unlabeled.c @@ -574,9 +574,10 @@ static int netlbl_unlhsh_remove_addr4(struct net *net, list_entry = netlbl_af4list_remove(addr->s_addr, mask->s_addr, &iface->addr4_list); spin_unlock(&netlbl_unlhsh_lock); - if (list_entry == NULL) + if (list_entry != NULL) + entry = netlbl_unlhsh_addr4_entry(list_entry); + else ret_val = -ENOENT; - entry = netlbl_unlhsh_addr4_entry(list_entry); audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL, audit_info); @@ -634,9 +635,10 @@ static int netlbl_unlhsh_remove_addr6(struct net *net, spin_lock(&netlbl_unlhsh_lock); list_entry = netlbl_af6list_remove(addr, mask, &iface->addr6_list); spin_unlock(&netlbl_unlhsh_lock); - if (list_entry == NULL) + if (list_entry != NULL) + entry = netlbl_unlhsh_addr6_entry(list_entry); + else ret_val = -ENOENT; - entry = netlbl_unlhsh_addr6_entry(list_entry); audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL, audit_info); -- cgit v1.2.3 From ee4ee527278a66321301d4f1f5ae22e49ab18fad Mon Sep 17 00:00:00 2001 From: Chris Torek Date: Wed, 3 Dec 2008 00:47:28 -0800 Subject: sparc64: Fix bug in PTRACE_SETFPREGS64 handling. From: Chris Torek >The SPARC64 kernel code for PTRACE_SETFPREGS64 appears to be an exact copy >of that for PTRACE_GETFPREGS64. This means that gdbserver and native >64-bit GDB cannot set floating-point registers. It looks like a simple typo. Signed-off-by: David S. Miller --- arch/sparc64/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index f43adbc773ca..a941c610e7ce 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -1014,7 +1014,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; case PTRACE_SETFPREGS64: - ret = copy_regset_to_user(child, view, REGSET_FP, + ret = copy_regset_from_user(child, view, REGSET_FP, 0 * sizeof(u64), 33 * sizeof(u64), fps); -- cgit v1.2.3 From 70d7d357578245f1993fd2d3ccd26088bcd38941 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 2 Dec 2008 20:16:03 +0100 Subject: x86: fix broken flushing in GART nofullflush path Impact: remove stale IOTLB entries In the non-default nofullflush case the GART is only flushed when next_bit wraps around. But it can happen that an unmap operation unmaps memory which is behind the current next_bit location. If these addresses are reused it may result in stale GART IO/TLB entries. Fix this by setting the GART next_bit always behind an unmapped location. Signed-off-by: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-gart_64.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index a42b02b4df68..ba7ad83e20a8 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -123,6 +123,8 @@ static void free_iommu(unsigned long offset, int size) spin_lock_irqsave(&iommu_bitmap_lock, flags); iommu_area_free(iommu_gart_bitmap, offset, size); + if (offset >= next_bit) + next_bit = offset + size; spin_unlock_irqrestore(&iommu_bitmap_lock, flags); } -- cgit v1.2.3 From 201955463a5c1a70d3f70d1598b27e4c2c402642 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 2 Dec 2008 22:55:38 +0100 Subject: check_hung_task(): unsigned sysctl_hung_task_warnings cannot be less than 0 Impact: fix warnings-limit cutoff check for debug feature unsigned sysctl_hung_task_warnings cannot be less than 0 Signed-off-by: Roel Kluin Signed-off-by: Ingo Molnar --- kernel/softlockup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/softlockup.c b/kernel/softlockup.c index 3953e4aed733..dc0b3be6b7d5 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -188,7 +188,7 @@ static void check_hung_task(struct task_struct *t, unsigned long now) if ((long)(now - t->last_switch_timestamp) < sysctl_hung_task_timeout_secs) return; - if (sysctl_hung_task_warnings < 0) + if (!sysctl_hung_task_warnings) return; sysctl_hung_task_warnings--; -- cgit v1.2.3 From e93f1be503efd0e44e46fc1fd4c13dbee72a6561 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Wed, 3 Dec 2008 10:47:20 +0000 Subject: [MTD] [NAND] fix OOPS accessing flash operations over STM flash on PXA STM 2Gb flash is a large-page NAND flash. Set operations accordingly. This field is dereferenced without a check in several places resulting in OOPS. Signed-off-by: Denis V. Lunev Acked-by: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/pxa3xx_nand.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index c0fa9c9edf08..15f0a26730ae 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -269,6 +269,7 @@ static struct pxa3xx_nand_timing stm2GbX16_timing = { static struct pxa3xx_nand_flash stm2GbX16 = { .timing = &stm2GbX16_timing, + .cmdset = &largepage_cmdset, .page_per_block = 64, .page_size = 2048, .flash_width = 16, -- cgit v1.2.3 From eac9fbc6a90ab3440f4d98a8c52b15a724fc6f4f Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Mon, 24 Nov 2008 13:53:24 +0000 Subject: AMD IOMMU: struct amd_iommu remove padding on 64 bit Remove 16 bytes of padding from struct amd_iommu on 64bit builds reducing its size to 120 bytes, allowing it to span one fewer cachelines. Signed-off-by: Richard Kennedy Signed-off-by: Joerg Roedel --- arch/x86/include/asm/amd_iommu_types.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h index 1a30c0440c6b..ac302a2fa339 100644 --- a/arch/x86/include/asm/amd_iommu_types.h +++ b/arch/x86/include/asm/amd_iommu_types.h @@ -251,13 +251,6 @@ struct amd_iommu { /* Pointer to PCI device of this IOMMU */ struct pci_dev *dev; - /* - * Capability pointer. There could be more than one IOMMU per PCI - * device function if there are more than one AMD IOMMU capability - * pointers. - */ - u16 cap_ptr; - /* physical address of MMIO space */ u64 mmio_phys; /* virtual address of MMIO space */ @@ -266,6 +259,13 @@ struct amd_iommu { /* capabilities of that IOMMU read from ACPI */ u32 cap; + /* + * Capability pointer. There could be more than one IOMMU per PCI + * device function if there are more than one AMD IOMMU capability + * pointers. + */ + u16 cap_ptr; + /* pci domain of this IOMMU */ u16 pci_seg; @@ -284,19 +284,19 @@ struct amd_iommu { /* size of command buffer */ u32 cmd_buf_size; - /* event buffer virtual address */ - u8 *evt_buf; /* size of event buffer */ u32 evt_buf_size; + /* event buffer virtual address */ + u8 *evt_buf; /* MSI number for event interrupt */ u16 evt_msi_num; - /* if one, we need to send a completion wait command */ - int need_sync; - /* true if interrupts for this IOMMU are already enabled */ bool int_enabled; + /* if one, we need to send a completion wait command */ + int need_sync; + /* default dma_ops domain for that IOMMU */ struct dma_ops_domain *default_dom; }; -- cgit v1.2.3 From f91ba190648be4ff127d6aaf3993ac19d66dc2c2 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 25 Nov 2008 12:56:12 +0100 Subject: AMD IOMMU: set device table entry for aliased devices In some rare cases a request can arrive an IOMMU with its originial requestor id even it is aliased. Handle this by setting the device table entry to the same protection domain for the original and the aliased requestor id. Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index e4899e0e8787..a232e5a85d48 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -858,6 +858,9 @@ static int get_device_resources(struct device *dev, print_devid(_bdf, 1); } + if (domain_for_device(_bdf) == NULL) + set_device_domain(*iommu, *domain, _bdf); + return 1; } -- cgit v1.2.3 From 09ee17eb8ea89514c13980c4010bdbbaea8630c2 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 3 Dec 2008 12:19:27 +0100 Subject: AMD IOMMU: fix possible race while accessing iommu->need_sync The access to the iommu->need_sync member needs to be protected by the iommu->lock. Otherwise this is a possible race condition. Fix it with this patch. Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 33 +++++++++++++-------------------- 1 file changed, 13 insertions(+), 20 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index a232e5a85d48..5662e226b0c9 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -187,6 +187,8 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) spin_lock_irqsave(&iommu->lock, flags); ret = __iommu_queue_command(iommu, cmd); + if (!ret) + iommu->need_sync = 1; spin_unlock_irqrestore(&iommu->lock, flags); return ret; @@ -210,10 +212,13 @@ static int iommu_completion_wait(struct amd_iommu *iommu) cmd.data[0] = CMD_COMPL_WAIT_INT_MASK; CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT); - iommu->need_sync = 0; - spin_lock_irqsave(&iommu->lock, flags); + if (!iommu->need_sync) + goto out; + + iommu->need_sync = 0; + ret = __iommu_queue_command(iommu, &cmd); if (ret) @@ -254,8 +259,6 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid) ret = iommu_queue_command(iommu, &cmd); - iommu->need_sync = 1; - return ret; } @@ -281,8 +284,6 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, ret = iommu_queue_command(iommu, &cmd); - iommu->need_sync = 1; - return ret; } @@ -762,8 +763,6 @@ static void set_device_domain(struct amd_iommu *iommu, write_unlock_irqrestore(&amd_iommu_devtable_lock, flags); iommu_queue_inv_dev_entry(iommu, devid); - - iommu->need_sync = 1; } /***************************************************************************** @@ -1034,8 +1033,7 @@ static dma_addr_t map_single(struct device *dev, phys_addr_t paddr, if (addr == bad_dma_address) goto out; - if (unlikely(iommu->need_sync)) - iommu_completion_wait(iommu); + iommu_completion_wait(iommu); out: spin_unlock_irqrestore(&domain->lock, flags); @@ -1063,8 +1061,7 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr, __unmap_single(iommu, domain->priv, dma_addr, size, dir); - if (unlikely(iommu->need_sync)) - iommu_completion_wait(iommu); + iommu_completion_wait(iommu); spin_unlock_irqrestore(&domain->lock, flags); } @@ -1130,8 +1127,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist, goto unmap; } - if (unlikely(iommu->need_sync)) - iommu_completion_wait(iommu); + iommu_completion_wait(iommu); out: spin_unlock_irqrestore(&domain->lock, flags); @@ -1176,8 +1172,7 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist, s->dma_address = s->dma_length = 0; } - if (unlikely(iommu->need_sync)) - iommu_completion_wait(iommu); + iommu_completion_wait(iommu); spin_unlock_irqrestore(&domain->lock, flags); } @@ -1228,8 +1223,7 @@ static void *alloc_coherent(struct device *dev, size_t size, goto out; } - if (unlikely(iommu->need_sync)) - iommu_completion_wait(iommu); + iommu_completion_wait(iommu); out: spin_unlock_irqrestore(&domain->lock, flags); @@ -1260,8 +1254,7 @@ static void free_coherent(struct device *dev, size_t size, __unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL); - if (unlikely(iommu->need_sync)) - iommu_completion_wait(iommu); + iommu_completion_wait(iommu); spin_unlock_irqrestore(&domain->lock, flags); -- cgit v1.2.3 From 53cc0b2948bcb8a084982e6c1f9bd7b337e0df38 Mon Sep 17 00:00:00 2001 From: Petr Vandrovec Date: Wed, 19 Nov 2008 11:12:14 +0100 Subject: When block layer fails to map iov, it calls bio_unmap_user to undo mapping. Which is good if pages were mapped - but if they were provided by someone else and just copied then bad things happen - pages are released once here, and once by caller, leading to user triggerable BUG at include/linux/mm.h:246. Signed-off-by: Petr Vandrovec Signed-off-by: Jens Axboe --- block/blk-map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-map.c b/block/blk-map.c index 0f4b4b881811..2990447f45e9 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -224,7 +224,7 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq, */ bio_get(bio); bio_endio(bio, 0); - bio_unmap_user(bio); + __blk_rq_unmap_user(bio); return -EINVAL; } -- cgit v1.2.3 From bf91db18ac2852a3ff39fe25ff56c5557c0fff78 Mon Sep 17 00:00:00 2001 From: Cheng Renquan Date: Thu, 20 Nov 2008 08:37:37 +0100 Subject: block: set disk->node_id before it's being used disk->node_id will be refered in allocating in disk_expand_part_tbl, so we should set it before disk->node_id is refered. Signed-off-by: Cheng Renquan Signed-off-by: Jens Axboe --- block/genhd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/genhd.c b/block/genhd.c index 27549e470da5..2f7feda61e35 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1102,6 +1102,7 @@ struct gendisk *alloc_disk_node(int minors, int node_id) kfree(disk); return NULL; } + disk->node_id = node_id; if (disk_expand_part_tbl(disk, 0)) { free_part_stats(&disk->part0); kfree(disk); @@ -1116,7 +1117,6 @@ struct gendisk *alloc_disk_node(int minors, int node_id) device_initialize(disk_to_dev(disk)); INIT_WORK(&disk->async_notify, media_change_notify_thread); - disk->node_id = node_id; } return disk; } -- cgit v1.2.3 From 53a08807c01989c6847bb135d8d43f61c5dfdda5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 3 Dec 2008 12:41:26 +0100 Subject: block: internal dequeue shouldn't start timer blkdev_dequeue_request() and elv_dequeue_request() are equivalent and both start the timeout timer. Barrier code dequeues the original barrier request but doesn't passes the request itself to lower level driver, only broken down proxy requests; however, as the original barrier code goes through the same dequeue path and timeout timer is started on it. If barrier sequence takes long enough, this timer expires but the low level driver has no idea about this request and oops follows. Timeout timer shouldn't have been started on the original barrier request as it never goes through actual IO. This patch unexports elv_dequeue_request(), which has no external user anyway, and makes it operate on elevator proper w/o adding the timer and make blkdev_dequeue_request() call elv_dequeue_request() and add timer. Internal users which don't pass the request to driver - barrier code and end_that_request_last() - are converted to use elv_dequeue_request(). Signed-off-by: Tejun Heo Cc: Mike Anderson Signed-off-by: Jens Axboe --- block/blk-barrier.c | 4 ++-- block/blk-core.c | 24 +++++++++++++++++++++++- block/elevator.c | 7 ------- include/linux/blkdev.h | 7 ++----- 4 files changed, 27 insertions(+), 15 deletions(-) diff --git a/block/blk-barrier.c b/block/blk-barrier.c index 5c99ff8d2db8..6e72d661ae42 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -161,7 +161,7 @@ static inline struct request *start_ordered(struct request_queue *q, /* * Prep proxy barrier request. */ - blkdev_dequeue_request(rq); + elv_dequeue_request(q, rq); q->orig_bar_rq = rq; rq = &q->bar_rq; blk_rq_init(q, rq); @@ -219,7 +219,7 @@ int blk_do_ordered(struct request_queue *q, struct request **rqp) * This can happen when the queue switches to * ORDERED_NONE while this request is on it. */ - blkdev_dequeue_request(rq); + elv_dequeue_request(q, rq); if (__blk_end_request(rq, -EOPNOTSUPP, blk_rq_bytes(rq))) BUG(); diff --git a/block/blk-core.c b/block/blk-core.c index 10e8a64a5a5b..7a779d7c69c9 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1636,6 +1636,28 @@ int blk_insert_cloned_request(struct request_queue *q, struct request *rq) } EXPORT_SYMBOL_GPL(blk_insert_cloned_request); +/** + * blkdev_dequeue_request - dequeue request and start timeout timer + * @req: request to dequeue + * + * Dequeue @req and start timeout timer on it. This hands off the + * request to the driver. + * + * Block internal functions which don't want to start timer should + * call elv_dequeue_request(). + */ +void blkdev_dequeue_request(struct request *req) +{ + elv_dequeue_request(req->q, req); + + /* + * We are now handing the request to the hardware, add the + * timeout handler. + */ + blk_add_timer(req); +} +EXPORT_SYMBOL(blkdev_dequeue_request); + /** * __end_that_request_first - end I/O on a request * @req: the request being processed @@ -1774,7 +1796,7 @@ static void end_that_request_last(struct request *req, int error) blk_queue_end_tag(req->q, req); if (blk_queued_rq(req)) - blkdev_dequeue_request(req); + elv_dequeue_request(req->q, req); if (unlikely(laptop_mode) && blk_fs_request(req)) laptop_io_completion(); diff --git a/block/elevator.c b/block/elevator.c index 9ac82dde99dd..a6951f76ba0c 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -844,14 +844,7 @@ void elv_dequeue_request(struct request_queue *q, struct request *rq) */ if (blk_account_rq(rq)) q->in_flight++; - - /* - * We are now handing the request to the hardware, add the - * timeout handler. - */ - blk_add_timer(rq); } -EXPORT_SYMBOL(elv_dequeue_request); int elv_queue_empty(struct request_queue *q) { diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a135256b272c..9cc7cc5fdce1 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -786,6 +786,8 @@ static inline void blk_run_address_space(struct address_space *mapping) blk_run_backing_dev(mapping->backing_dev_info, NULL); } +extern void blkdev_dequeue_request(struct request *req); + /* * blk_end_request() and friends. * __blk_end_request() and end_request() must be called with @@ -820,11 +822,6 @@ extern void blk_update_request(struct request *rq, int error, extern unsigned int blk_rq_bytes(struct request *rq); extern unsigned int blk_rq_cur_bytes(struct request *rq); -static inline void blkdev_dequeue_request(struct request *req) -{ - elv_dequeue_request(req->q, req); -} - /* * Access functions for manipulating queue properties */ -- cgit v1.2.3 From 0e435ac26e3f951d83338ed3d4ab7dc0fe0055bc Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Wed, 3 Dec 2008 12:55:08 +0100 Subject: block: fix setting of max_segment_size and seg_boundary mask Fix setting of max_segment_size and seg_boundary mask for stacked md/dm devices. When stacking devices (LVM over MD over SCSI) some of the request queue parameters are not set up correctly in some cases by default, namely max_segment_size and and seg_boundary mask. If you create MD device over SCSI, these attributes are zeroed. Problem become when there is over this mapping next device-mapper mapping - queue attributes are set in DM this way: request_queue max_segment_size seg_boundary_mask SCSI 65536 0xffffffff MD RAID1 0 0 LVM 65536 -1 (64bit) Unfortunately bio_add_page (resp. bio_phys_segments) calculates number of physical segments according to these parameters. During the generic_make_request() is segment cout recalculated and can increase bio->bi_phys_segments count over the allowed limit. (After bio_clone() in stack operation.) Thi is specially problem in CCISS driver, where it produce OOPS here BUG_ON(creq->nr_phys_segments > MAXSGENTRIES); (MAXSEGENTRIES is 31 by default.) Sometimes even this command is enough to cause oops: dd iflag=direct if=/dev// of=/dev/null bs=128000 count=10 This command generates bios with 250 sectors, allocated in 32 4k-pages (last page uses only 1024 bytes). For LVM layer, it allocates bio with 31 segments (still OK for CCISS), unfortunatelly on lower layer it is recalculated to 32 segments and this violates CCISS restriction and triggers BUG_ON(). The patch tries to fix it by: * initializing attributes above in queue request constructor blk_queue_make_request() * make sure that blk_queue_stack_limits() inherits setting (DM uses its own function to set the limits because it blk_queue_stack_limits() was introduced later. It should probably switch to use generic stack limit function too.) * sets the default seg_boundary value in one place (blkdev.h) * use this mask as default in DM (instead of -1, which differs in 64bit) Bugs related to this: https://bugzilla.redhat.com/show_bug.cgi?id=471639 http://bugzilla.kernel.org/show_bug.cgi?id=8672 Signed-off-by: Milan Broz Reviewed-by: Alasdair G Kergon Cc: Neil Brown Cc: FUJITA Tomonori Cc: Tejun Heo Cc: Mike Miller Signed-off-by: Jens Axboe --- block/blk-core.c | 2 +- block/blk-settings.c | 4 ++++ drivers/md/dm-table.c | 2 +- include/linux/blkdev.h | 2 ++ 4 files changed, 8 insertions(+), 2 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 7a779d7c69c9..c36aa98fafa3 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -592,7 +592,7 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id) 1 << QUEUE_FLAG_STACKABLE); q->queue_lock = lock; - blk_queue_segment_boundary(q, 0xffffffff); + blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK); blk_queue_make_request(q, __make_request); blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE); diff --git a/block/blk-settings.c b/block/blk-settings.c index 41392fbe19ff..afa55e14e278 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -125,6 +125,9 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn) q->nr_requests = BLKDEV_MAX_RQ; blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS); blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS); + blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK); + blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE); + q->make_request_fn = mfn; q->backing_dev_info.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE; @@ -314,6 +317,7 @@ void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b) /* zero is "infinity" */ t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors); t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors); + t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask, b->seg_boundary_mask); t->max_phys_segments = min(t->max_phys_segments, b->max_phys_segments); t->max_hw_segments = min(t->max_hw_segments, b->max_hw_segments); diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index a63161aec487..04e5fd742c2c 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -668,7 +668,7 @@ static void check_for_valid_limits(struct io_restrictions *rs) if (!rs->max_segment_size) rs->max_segment_size = MAX_SEGMENT_SIZE; if (!rs->seg_boundary_mask) - rs->seg_boundary_mask = -1; + rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; if (!rs->bounce_pfn) rs->bounce_pfn = -1; } diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9cc7cc5fdce1..6dcd30d806cd 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -918,6 +918,8 @@ extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter); #define MAX_SEGMENT_SIZE 65536 +#define BLK_SEG_BOUNDARY_MASK 0xFFFFFFFFUL + #define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist) static inline int queue_hardsect_size(struct request_queue *q) -- cgit v1.2.3 From 9ea84ad77d635bdb76c9a08f44f21a9af98359ee Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 2 Dec 2008 07:21:21 +0100 Subject: oprofile: fix CPU unplug panic in ppro_stop() If oprofile statically compiled in kernel, a cpu unplug triggers a panic in ppro_stop(), because a NULL pointer is dereferenced. Signed-off-by: Eric Dumazet Signed-off-by: Robert Richter --- arch/x86/oprofile/op_model_ppro.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index 716d26f0e5d4..e9f80c744cf3 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -156,6 +156,8 @@ static void ppro_start(struct op_msrs const * const msrs) unsigned int low, high; int i; + if (!reset_value) + return; for (i = 0; i < num_counters; ++i) { if (reset_value[i]) { CTRL_READ(low, high, msrs, i); @@ -171,6 +173,8 @@ static void ppro_stop(struct op_msrs const * const msrs) unsigned int low, high; int i; + if (!reset_value) + return; for (i = 0; i < num_counters; ++i) { if (!reset_value[i]) continue; -- cgit v1.2.3 From dafdb61313e80e20cfeef7bf4653dcb47cf28591 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 27 Nov 2008 20:36:45 +0300 Subject: powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dts Just found the merge issue in 442746989d92afc125040e0f29b33602ad94da99 ("powerpc/83xx: Add support for MCU microcontroller in .dts files"): the commit adds the MCU controller node into the DMA node, which is wrong because the MCU sits on the I2C bus. Fix this by moving the MCU node into the I2C controller node. The original patch[1] was OK though. ;-) Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitx.dts | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 2c9d54a35bc3..4bdbaf4993a1 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -91,6 +91,14 @@ interrupts = <18 0x8>; interrupt-parent = <&ipic>; }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8349emitx", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; }; spi@7000 { @@ -139,14 +147,6 @@ interrupt-parent = <&ipic>; interrupts = <71 8>; }; - - mcu_pio: mcu@a { - #gpio-cells = <2>; - compatible = "fsl,mc9s08qg8-mpc8349emitx", - "fsl,mcu-mpc8349emitx"; - reg = <0x0a>; - gpio-controller; - }; }; usb@22000 { -- cgit v1.2.3 From 3d337c653c94be50f11a45fb14a2afa8a8a1a618 Mon Sep 17 00:00:00 2001 From: William Cohen Date: Sun, 30 Nov 2008 15:39:10 -0500 Subject: x86/oprofile: fix Intel cpu family 6 detection Alan Jenkins wrote: > This is on an EeePC 701, /proc/cpuinfo as attached. > > Is this expected? Will the next release work? > > Thanks, Alan > > # opcontrol --setup --no-vmlinux > cpu_type 'unset' is not valid > you should upgrade oprofile or force the use of timer mode > > # opcontrol -v > opcontrol: oprofile 0.9.4 compiled on Nov 29 2008 22:44:10 > > # cat /dev/oprofile/cpu_type > i386/p6 > # uname -r > 2.6.28-rc6eeepc Hi Alan, Looking at the kernel driver code for oprofile it can return the "i386/p6" for the cpu_type. However, looking at the user-space oprofile code there isn't the matching entry in libop/op_cpu_type.c or the events/unit_mask files in events/i386 directory. The Intel AP-485 says this is a "Intel Pentium M processor model D". Seems like the oprofile kernel driver should be identifying the processor as "i386/p6_mobile" The driver identification code doesn't look quite right in nmi_init.c http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=blob;f=arch/x86/oprofile/nmi_int.c;h=022cd41ea9b4106e5884277096e80e9088a7c7a9;hb=HEAD has: 409 case 10 ... 13: 410 *cpu_type = "i386/p6"; 411 break; Referring to the Intel AP-485: case 10 and 11 should produce "i386/piii" case 13 should produce "i386/p6_mobile" I didn't see anything for case 12. Something like the attached patch. I don't have a celeron machine to verify that changes in this area of the kernel fix thing. -Will Signed-off-by: William Cohen Tested-by: Alan Jenkins Acked-by: Andi Kleen Signed-off-by: Robert Richter --- arch/x86/oprofile/nmi_int.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 022cd41ea9b4..202864ad49a7 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -401,14 +401,13 @@ static int __init ppro_init(char **cpu_type) *cpu_type = "i386/pii"; break; case 6 ... 8: + case 10 ... 11: *cpu_type = "i386/piii"; break; case 9: + case 13: *cpu_type = "i386/p6_mobile"; break; - case 10 ... 13: - *cpu_type = "i386/p6"; - break; case 14: *cpu_type = "i386/core"; break; -- cgit v1.2.3 From bd7df219202f44e71e2e975a0fb5f76f946c1aef Mon Sep 17 00:00:00 2001 From: "remi.denis-courmont@nokia" Date: Mon, 1 Dec 2008 02:37:20 +0000 Subject: Phonet: do not dump addresses from other namespaces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- net/phonet/pn_netlink.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c index b1770d66bc8d..242fe8f8c322 100644 --- a/net/phonet/pn_netlink.c +++ b/net/phonet/pn_netlink.c @@ -123,6 +123,7 @@ nla_put_failure: static int getaddr_dumpit(struct sk_buff *skb, struct netlink_callback *cb) { + struct net *net = sock_net(skb->sk); struct phonet_device *pnd; int dev_idx = 0, dev_start_idx = cb->args[0]; int addr_idx = 0, addr_start_idx = cb->args[1]; @@ -131,6 +132,8 @@ static int getaddr_dumpit(struct sk_buff *skb, struct netlink_callback *cb) list_for_each_entry(pnd, &pndevs.list, list) { u8 addr; + if (!net_eq(dev_net(pnd->netdev), net)) + continue; if (dev_idx > dev_start_idx) addr_start_idx = 0; if (dev_idx++ < dev_start_idx) -- cgit v1.2.3 From d253eee20195b25e298bf162a6e72f14bf4803e5 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 3 Dec 2008 15:52:35 -0800 Subject: can: Fix CAN_(EFF|RTR)_FLAG handling in can_filter Due to a wrong safety check in af_can.c it was not possible to filter for SFF frames with a specific CAN identifier without getting the same selected CAN identifier from a received EFF frame also. This fix has a minimum (but user visible) impact on the CAN filter API and therefore the CAN version is set to a new date. Indeed the 'old' API is still working as-is. But when now setting CAN_(EFF|RTR)_FLAG in can_filter.can_mask you might get less traffic than before - but still the stuff that you expected to get for your defined filter ... Thanks to Kurt Van Dijck for pointing at this issue and for the review. Signed-off-by: Oliver Hartkopp Acked-by: Kurt Van Dijck Signed-off-by: David S. Miller --- include/linux/can/core.h | 2 +- net/can/af_can.c | 63 ++++++++++++++++++++++++++++++++++++------------ net/can/bcm.c | 7 +++--- 3 files changed, 53 insertions(+), 19 deletions(-) diff --git a/include/linux/can/core.h b/include/linux/can/core.h index e9ca210ffa5b..f50785ad4781 100644 --- a/include/linux/can/core.h +++ b/include/linux/can/core.h @@ -19,7 +19,7 @@ #include #include -#define CAN_VERSION "20071116" +#define CAN_VERSION "20081130" /* increment this number each time you change some user-space interface */ #define CAN_ABI_VERSION "8" diff --git a/net/can/af_can.c b/net/can/af_can.c index 7d4d2b3c137e..d8173e50cb87 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -319,23 +319,52 @@ static struct dev_rcv_lists *find_dev_rcv_lists(struct net_device *dev) return n ? d : NULL; } +/** + * find_rcv_list - determine optimal filterlist inside device filter struct + * @can_id: pointer to CAN identifier of a given can_filter + * @mask: pointer to CAN mask of a given can_filter + * @d: pointer to the device filter struct + * + * Description: + * Returns the optimal filterlist to reduce the filter handling in the + * receive path. This function is called by service functions that need + * to register or unregister a can_filter in the filter lists. + * + * A filter matches in general, when + * + * & mask == can_id & mask + * + * so every bit set in the mask (even CAN_EFF_FLAG, CAN_RTR_FLAG) describe + * relevant bits for the filter. + * + * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can + * filter for error frames (CAN_ERR_FLAG bit set in mask). For error frames + * there is a special filterlist and a special rx path filter handling. + * + * Return: + * Pointer to optimal filterlist for the given can_id/mask pair. + * Constistency checked mask. + * Reduced can_id to have a preprocessed filter compare value. + */ static struct hlist_head *find_rcv_list(canid_t *can_id, canid_t *mask, struct dev_rcv_lists *d) { canid_t inv = *can_id & CAN_INV_FILTER; /* save flag before masking */ - /* filter error frames */ + /* filter for error frames in extra filterlist */ if (*mask & CAN_ERR_FLAG) { - /* clear CAN_ERR_FLAG in list entry */ + /* clear CAN_ERR_FLAG in filter entry */ *mask &= CAN_ERR_MASK; return &d->rx[RX_ERR]; } - /* ensure valid values in can_mask */ - if (*mask & CAN_EFF_FLAG) - *mask &= (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG); - else - *mask &= (CAN_SFF_MASK | CAN_RTR_FLAG); + /* with cleared CAN_ERR_FLAG we have a simple mask/value filterpair */ + +#define CAN_EFF_RTR_FLAGS (CAN_EFF_FLAG | CAN_RTR_FLAG) + + /* ensure valid values in can_mask for 'SFF only' frame filtering */ + if ((*mask & CAN_EFF_FLAG) && !(*can_id & CAN_EFF_FLAG)) + *mask &= (CAN_SFF_MASK | CAN_EFF_RTR_FLAGS); /* reduce condition testing at receive time */ *can_id &= *mask; @@ -348,15 +377,19 @@ static struct hlist_head *find_rcv_list(canid_t *can_id, canid_t *mask, if (!(*mask)) return &d->rx[RX_ALL]; - /* use extra filterset for the subscription of exactly *ONE* can_id */ - if (*can_id & CAN_EFF_FLAG) { - if (*mask == (CAN_EFF_MASK | CAN_EFF_FLAG)) { - /* RFC: a use-case for hash-tables in the future? */ - return &d->rx[RX_EFF]; + /* extra filterlists for the subscription of a single non-RTR can_id */ + if (((*mask & CAN_EFF_RTR_FLAGS) == CAN_EFF_RTR_FLAGS) + && !(*can_id & CAN_RTR_FLAG)) { + + if (*can_id & CAN_EFF_FLAG) { + if (*mask == (CAN_EFF_MASK | CAN_EFF_RTR_FLAGS)) { + /* RFC: a future use-case for hash-tables? */ + return &d->rx[RX_EFF]; + } + } else { + if (*mask == (CAN_SFF_MASK | CAN_EFF_RTR_FLAGS)) + return &d->rx_sff[*can_id]; } - } else { - if (*mask == CAN_SFF_MASK) - return &d->rx_sff[*can_id]; } /* default: filter via can_id/can_mask */ diff --git a/net/can/bcm.c b/net/can/bcm.c index d0dd382001e2..da0d426c0ce4 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -64,10 +64,11 @@ #define BCM_CAN_DLC_MASK 0x0F /* clean private flags in can_dlc by masking */ /* get best masking value for can_rx_register() for a given single can_id */ -#define REGMASK(id) ((id & CAN_RTR_FLAG) | ((id & CAN_EFF_FLAG) ? \ - (CAN_EFF_MASK | CAN_EFF_FLAG) : CAN_SFF_MASK)) +#define REGMASK(id) ((id & CAN_EFF_FLAG) ? \ + (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG) : \ + (CAN_SFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG)) -#define CAN_BCM_VERSION "20080415" +#define CAN_BCM_VERSION CAN_VERSION static __initdata const char banner[] = KERN_INFO "can: broadcast manager protocol (rev " CAN_BCM_VERSION ")\n"; -- cgit v1.2.3 From e8e8e80ee047b131a0cd6a3e96e0f8dfa14f6d99 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 3 Dec 2008 16:04:52 -0800 Subject: sparc: asm/bitops.h should define __fls bitops_64.h includes the generic one; pretty sure 32 should too. (Found by using __fls in generic code and breaking sparc defconfig build: thanks Stephen and linux-next!) Signed-off-by: Rusty Russell Signed-off-by: David S. Miller --- arch/sparc/include/asm/bitops_32.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sparc/include/asm/bitops_32.h b/arch/sparc/include/asm/bitops_32.h index 68b98a7e6454..9cf4ae0cd7ba 100644 --- a/arch/sparc/include/asm/bitops_32.h +++ b/arch/sparc/include/asm/bitops_32.h @@ -98,6 +98,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) #include #include #include +#include #include #include #include -- cgit v1.2.3 From cd92a17eec752f8c948c4b6ab93dc099ce55b8cb Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 3 Dec 2008 16:20:19 -0800 Subject: iTCO_wdt: fix typo when setting TCO_EN bit The code used '&= 0x00002000' when it tried to set the TCO_EN bit, which obviously didn't set that bit at all, but instead just reset all the other bits in the SMI_EN register. This bug seemingly caused various random behavior, with Frans Pop reporting that X.org just silently hung at startup and Rafael Wysocki reports the fan spinning with full speed. See http://lkml.org/lkml/2008/12/3/178 http://bugzilla.kernel.org/show_bug.cgi?id=12162 The problem seems to have been triggered by "[WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards" (commit 7cd5b08be3c489df11b559fef210b81133764ad4), but the bogus code existed before that too (in the "supermicro_old_pre_stop()" function), it just apparently never showed up due to different logic. In that commit the broken code got moved around and now gets executed much more. Reported-by: Rafael J. Wysocki Tested-by: Frans Pop Cc: Wim Van Sebroeck Signed-off-by: Linus Torvalds --- drivers/watchdog/iTCO_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 26173a270e94..5b395a4ddfdf 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -392,7 +392,7 @@ static int iTCO_wdt_stop(void) /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ val32 = inl(SMI_EN); - val32 &= 0x00002000; + val32 |= 0x00002000; outl(val32, SMI_EN); /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ -- cgit v1.2.3 From 8711cca2251f1fc3beb870a75ff847bb55225490 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 4 Dec 2008 03:19:45 +1100 Subject: MAINTAINERS: Add security subsystem maintainer Add myself as overall maintainer of the security subsystem (generally, components under the top-level security directory). This addresses the lack of an official maintainer for the increasing number of security projects being incorporated into the kernel. Signed-off-by: James Morris Acked-by: Chris Wright Signed-off-by: Linus Torvalds --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 8f2b67ea0549..24741de12a39 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3759,6 +3759,15 @@ M: drzeus-sdhci@drzeus.cx L: sdhci-devel@list.drzeus.cx S: Maintained +SECURITY SUBSYSTEM +F: security/ +P: James Morris +M: jmorris@namei.org +L: linux-kernel@vger.kernel.org +L: linux-security-module@vger.kernel.org (suggested Cc:) +T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git +S: Supported + SECURITY CONTACT P: Security Officers M: security@kernel.org -- cgit v1.2.3 From 004b50f4ed2accb56069d56714a32484f8b83ec0 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 3 Dec 2008 16:33:14 +0000 Subject: MN10300: Introduce barriers to replace removed volatiles in gdbstub 16550 driver Introduce into the MN10300 gdbstub 16550 driver a couple of barrier() calls to replace the removed volatility of the input/output index variables for the Rx ring buffer. A previous patch added them into the on-chip serial port driver. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/gdb-io-serial.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c index 9a6d4e8ebe73..11584c51acd9 100644 --- a/arch/mn10300/kernel/gdb-io-serial.c +++ b/arch/mn10300/kernel/gdb-io-serial.c @@ -99,6 +99,7 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) try_again: /* pull chars out of the buffer */ ix = gdbstub_rx_outp; + barrier(); if (ix == gdbstub_rx_inp) { if (nonblock) return -EAGAIN; @@ -110,6 +111,7 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) ch = gdbstub_rx_buffer[ix++]; st = gdbstub_rx_buffer[ix++]; + barrier(); gdbstub_rx_outp = ix & 0x00000fff; if (st & UART_LSR_BI) { -- cgit v1.2.3 From a7f014f2de04893f95cfe40fe35f15c8dae4b36e Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 25 Nov 2008 14:02:05 -0800 Subject: drm/i915: Respect GM965/GM45 bit-17-instead-of-bit-11 option for swizzling. This fixes readpixels and buffer corruption when swapped out and in by disabling tiling on them. Now that we know that the bit 17 mode isn't just a mistake of older chipsets, we'll need to work on a clever fix so that we can get the performance of tiling on these chipsets, but that will require intrusive changes targeted at the next kernel release, not this one. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem_tiling.c | 7 ++++--- drivers/gpu/drm/i915/i915_reg.h | 1 + 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index e8b85ac4ca04..a8cb69469c64 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -119,9 +119,10 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) dcc & DCC_CHANNEL_XOR_DISABLE) { swizzle_x = I915_BIT_6_SWIZZLE_9_10; swizzle_y = I915_BIT_6_SWIZZLE_9; - } else if (IS_I965GM(dev) || IS_GM45(dev)) { - /* GM965 only does bit 11-based channel - * randomization + } else if ((IS_I965GM(dev) || IS_GM45(dev)) && + (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) { + /* GM965/GM45 does either bit 11 or bit 17 + * swizzling. */ swizzle_x = I915_BIT_6_SWIZZLE_9_10_11; swizzle_y = I915_BIT_6_SWIZZLE_9_11; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0e476eba36e6..9d24aaeb8a45 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -522,6 +522,7 @@ #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) #define DCC_ADDRESSING_MODE_MASK (3 << 0) #define DCC_CHANNEL_XOR_DISABLE (1 << 10) +#define DCC_CHANNEL_XOR_BIT_17 (1 << 9) /** 965 MCH register controlling DRAM channel configuration */ #define C0DRB3 0x10206 -- cgit v1.2.3 From ce44b0ea3dc04236d852d78a06f850d1f7b03f3d Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 6 Nov 2008 16:00:31 -0800 Subject: drm/i915: Move flushing list cleanup from flush request retire to request emit. obj_priv->write_domain is "write domain if the GPU went idle now", not "write domain at this moment." By postponing the clear, we confused the concept, required more storage, and potentially emitted more flushes than are required. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_drv.h | 11 ++++-- drivers/gpu/drm/i915/i915_gem.c | 73 ++++++++++++++++++++---------------- drivers/gpu/drm/i915/i915_gem_proc.c | 5 +-- 3 files changed, 50 insertions(+), 39 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0a4f39b9a0ec..76d9a706d8fd 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -244,6 +244,10 @@ typedef struct drm_i915_private { * List of objects currently involved in rendering from the * ringbuffer. * + * Includes buffers having the contents of their GPU caches + * flushed, not necessarily primitives. last_rendering_seqno + * represents when the rendering involved will be completed. + * * A reference is held on the buffer while on this list. */ struct list_head active_list; @@ -253,6 +257,8 @@ typedef struct drm_i915_private { * still have a write_domain which needs to be flushed before * unbinding. * + * last_rendering_seqno is 0 while an object is in this list. + * * A reference is held on the buffer while on this list. */ struct list_head flushing_list; @@ -261,6 +267,8 @@ typedef struct drm_i915_private { * LRU list of objects which are not in the ringbuffer and * are ready to unbind, but are still in the GTT. * + * last_rendering_seqno is 0 while an object is in this list. + * * A reference is not held on the buffer while on this list, * as merely being GTT-bound shouldn't prevent its being * freed, and we'll pull it off the list in the free path. @@ -394,9 +402,6 @@ struct drm_i915_gem_request { /** Time at which this request was emitted, in jiffies. */ unsigned long emitted_jiffies; - /** Cache domains that were flushed at the start of the request. */ - uint32_t flush_domains; - struct list_head list; }; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index d58ddef468f8..9fd28ebe0aa3 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -532,7 +532,7 @@ i915_gem_object_free_page_list(struct drm_gem_object *obj) } static void -i915_gem_object_move_to_active(struct drm_gem_object *obj) +i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; @@ -546,8 +546,20 @@ i915_gem_object_move_to_active(struct drm_gem_object *obj) /* Move from whatever list we were on to the tail of execution. */ list_move_tail(&obj_priv->list, &dev_priv->mm.active_list); + obj_priv->last_rendering_seqno = seqno; } +static void +i915_gem_object_move_to_flushing(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + BUG_ON(!obj_priv->active); + list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list); + obj_priv->last_rendering_seqno = 0; +} static void i915_gem_object_move_to_inactive(struct drm_gem_object *obj) @@ -562,6 +574,7 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj) else list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); + obj_priv->last_rendering_seqno = 0; if (obj_priv->active) { obj_priv->active = 0; drm_gem_object_unreference(obj); @@ -610,10 +623,28 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains) request->seqno = seqno; request->emitted_jiffies = jiffies; - request->flush_domains = flush_domains; was_empty = list_empty(&dev_priv->mm.request_list); list_add_tail(&request->list, &dev_priv->mm.request_list); + /* Associate any objects on the flushing list matching the write + * domain we're flushing with our flush. + */ + if (flush_domains != 0) { + struct drm_i915_gem_object *obj_priv, *next; + + list_for_each_entry_safe(obj_priv, next, + &dev_priv->mm.flushing_list, list) { + struct drm_gem_object *obj = obj_priv->obj; + + if ((obj->write_domain & flush_domains) == + obj->write_domain) { + obj->write_domain = 0; + i915_gem_object_move_to_active(obj, seqno); + } + } + + } + if (was_empty && !dev_priv->mm.suspended) schedule_delayed_work(&dev_priv->mm.retire_work, HZ); return seqno; @@ -676,30 +707,10 @@ i915_gem_retire_request(struct drm_device *dev, __func__, request->seqno, obj); #endif - if (obj->write_domain != 0) { - list_move_tail(&obj_priv->list, - &dev_priv->mm.flushing_list); - } else { + if (obj->write_domain != 0) + i915_gem_object_move_to_flushing(obj); + else i915_gem_object_move_to_inactive(obj); - } - } - - if (request->flush_domains != 0) { - struct drm_i915_gem_object *obj_priv, *next; - - /* Clear the write domain and activity from any buffers - * that are just waiting for a flush matching the one retired. - */ - list_for_each_entry_safe(obj_priv, next, - &dev_priv->mm.flushing_list, list) { - struct drm_gem_object *obj = obj_priv->obj; - - if (obj->write_domain & request->flush_domains) { - obj->write_domain = 0; - i915_gem_object_move_to_inactive(obj); - } - } - } } @@ -896,17 +907,15 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj) * create a new seqno to wait for. */ if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) { - uint32_t write_domain = obj->write_domain; + uint32_t seqno, write_domain = obj->write_domain; #if WATCH_BUF DRM_INFO("%s: flushing object %p from write domain %08x\n", __func__, obj, write_domain); #endif i915_gem_flush(dev, 0, write_domain); - i915_gem_object_move_to_active(obj); - obj_priv->last_rendering_seqno = i915_add_request(dev, - write_domain); - BUG_ON(obj_priv->last_rendering_seqno == 0); + seqno = i915_add_request(dev, write_domain); + i915_gem_object_move_to_active(obj, seqno); #if WATCH_LRU DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj); #endif @@ -1927,10 +1936,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_file_priv->mm.last_gem_seqno = seqno; for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; - struct drm_i915_gem_object *obj_priv = obj->driver_private; - i915_gem_object_move_to_active(obj); - obj_priv->last_rendering_seqno = seqno; + i915_gem_object_move_to_active(obj, seqno); #if WATCH_LRU DRM_INFO("%s: move to exec list %p\n", __func__, obj); #endif diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c index 93de15b4c9a7..e8d5abe1250e 100644 --- a/drivers/gpu/drm/i915/i915_gem_proc.c +++ b/drivers/gpu/drm/i915/i915_gem_proc.c @@ -166,10 +166,9 @@ static int i915_gem_request_info(char *buf, char **start, off_t offset, list_for_each_entry(gem_request, &dev_priv->mm.request_list, list) { - DRM_PROC_PRINT(" %d @ %d %08x\n", + DRM_PROC_PRINT(" %d @ %d\n", gem_request->seqno, - (int) (jiffies - gem_request->emitted_jiffies), - gem_request->flush_domains); + (int) (jiffies - gem_request->emitted_jiffies)); } if (len > request + offset) return request; -- cgit v1.2.3 From b670d8158283c35842ae1c650f75c375d8710607 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Fri, 14 Nov 2008 16:27:47 -0800 Subject: drm/i915: If interrupted while setting object domains, still emit the flush. Otherwise, we would leave the objects in an inconsistent state, such as write_domain == 0 but on the flushing list. Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 9fd28ebe0aa3..3fe108b7e2fa 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1880,8 +1880,20 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, ret = i915_gem_object_set_domain(obj, obj->pending_read_domains, obj->pending_write_domain); - if (ret) + if (ret) { + /* As we've partially updated domains on our buffers, + * we have to emit the flush we've accumulated + * before exiting, or we'll have broken the + * active/flushing/inactive invariants. + * + * We'll potentially have some things marked as + * being in write domains that they actually aren't, + * but that should be merely a minor performance loss. + */ + flush_domains = i915_gem_dev_set_domain(dev); + (void)i915_add_request(dev, flush_domains); goto err; + } } i915_verify_inactive(dev, __FILE__, __LINE__); -- cgit v1.2.3 From 2ef7eeaa553d88e78d9a4520271f26a7bc0e2968 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 10 Nov 2008 10:53:25 -0800 Subject: drm/i915: Make a single set-to-gtt-domain path. This fixes failure to flush caches in the relocation update path, and failure to wait in the set_domain ioctl, each of which could lead to incorrect rendering. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 115 +++++++++++++++++++++++++++++++++------- 1 file changed, 96 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 3fe108b7e2fa..62a059dce85f 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -48,6 +48,8 @@ i915_gem_set_domain(struct drm_gem_object *obj, struct drm_file *file_priv, uint32_t read_domains, uint32_t write_domain); +static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, + int write); static int i915_gem_object_get_page_list(struct drm_gem_object *obj); static void i915_gem_object_free_page_list(struct drm_gem_object *obj); static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); @@ -260,8 +262,7 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, mutex_unlock(&dev->struct_mutex); return ret; } - ret = i915_gem_set_domain(obj, file_priv, - I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT); + ret = i915_gem_object_set_to_gtt_domain(obj, 1); if (ret) goto fail; @@ -397,7 +398,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, } /** - * Called when user space prepares to use an object + * Called when user space prepares to use an object with the CPU, either + * through the mmap ioctl's mapping or a GTT mapping. */ int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, @@ -405,11 +407,26 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, { struct drm_i915_gem_set_domain *args = data; struct drm_gem_object *obj; + uint32_t read_domains = args->read_domains; + uint32_t write_domain = args->write_domain; int ret; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; + /* Only handle setting domains to types used by the CPU. */ + if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + return -EINVAL; + + if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + return -EINVAL; + + /* Having something in the write domain implies it's in the read + * domain, and only that read domain. Enforce that in the request. + */ + if (write_domain != 0 && read_domains != write_domain) + return -EINVAL; + obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) return -EBADF; @@ -417,10 +434,15 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); #if WATCH_BUF DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", - obj, obj->size, args->read_domains, args->write_domain); + obj, obj->size, read_domains, write_domain); #endif - ret = i915_gem_set_domain(obj, file_priv, - args->read_domains, args->write_domain); + if (read_domains & I915_GEM_DOMAIN_GTT) { + ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0); + } else { + ret = i915_gem_set_domain(obj, file_priv, + read_domains, write_domain); + } + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; @@ -1237,6 +1259,69 @@ i915_gem_clflush_object(struct drm_gem_object *obj) drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE); } +/** + * Moves a single object to the GTT read, and possibly write domain. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + uint32_t flush_domains; + + /* Figure out what GPU domains we need to flush or invalidate for + * moving to GTT. + */ + flush_domains = obj->write_domain & I915_GEM_GPU_DOMAINS; + + /* Queue the GPU write cache flushing we need. */ + if (flush_domains != 0) { + uint32_t seqno; + + obj->write_domain &= ~I915_GEM_GPU_DOMAINS; + i915_gem_flush(dev, 0, flush_domains); + seqno = i915_add_request(dev, flush_domains); + i915_gem_object_move_to_active(obj, seqno); + } + + /* Wait on any GPU rendering and flushing to occur. */ + if (obj_priv->active) { + int ret; + + ret = i915_wait_request(dev, obj_priv->last_rendering_seqno); + if (ret != 0) + return ret; + } + + /* If we're writing through the GTT domain, then CPU and GPU caches + * will need to be invalidated at next use. + */ + if (write) + obj->read_domains &= ~(I915_GEM_GPU_DOMAINS | + I915_GEM_DOMAIN_CPU); + + /* Flush the CPU domain if it's dirty. */ + if (obj->write_domain & I915_GEM_DOMAIN_CPU) { + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + + obj->write_domain &= ~I915_GEM_DOMAIN_CPU; + } + + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); + obj->read_domains |= I915_GEM_DOMAIN_GTT; + if (write) + obj->write_domain = I915_GEM_DOMAIN_GTT; + + return 0; +} + /* * Set the next domain for the specified object. This * may not actually perform the necessary flushing/invaliding though, @@ -1634,19 +1719,11 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, continue; } - /* Now that we're going to actually write some data in, - * make sure that any rendering using this buffer's contents - * is completed. - */ - i915_gem_object_wait_rendering(obj); - - /* As we're writing through the gtt, flush - * any CPU writes before we write the relocations - */ - if (obj->write_domain & I915_GEM_DOMAIN_CPU) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - obj->write_domain = 0; + ret = i915_gem_object_set_to_gtt_domain(obj, 1); + if (ret != 0) { + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; } /* Map the page containing the relocation we're going to -- cgit v1.2.3 From e47c68e9c5d71e2faab8c2b82f57c6c73e6456fd Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Fri, 14 Nov 2008 13:35:19 -0800 Subject: drm/i915: Make a single set-to-cpu-domain path and use it wherever needed. This fixes several domain management bugs, including potential lack of cache invalidation for pread, potential failure to wait for set_domain(CPU, 0), and more, along with producing more intelligible code. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_drv.h | 4 +- drivers/gpu/drm/i915/i915_gem.c | 363 +++++++++++++++++++++++----------------- 2 files changed, 215 insertions(+), 152 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 76d9a706d8fd..adc972cc6bfc 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -379,8 +379,8 @@ struct drm_i915_gem_object { uint32_t agp_type; /** - * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when - * GEM_DOMAIN_CPU is not in the object's read domain. + * If present, while GEM_DOMAIN_CPU is in the read domain this array + * flags which individual pages are valid. */ uint8_t *page_cpu_valid; }; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 62a059dce85f..f7e9f2c2934c 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -37,19 +37,17 @@ static int i915_gem_object_set_domain(struct drm_gem_object *obj, uint32_t read_domains, uint32_t write_domain); -static int -i915_gem_object_set_domain_range(struct drm_gem_object *obj, - uint64_t offset, - uint64_t size, - uint32_t read_domains, - uint32_t write_domain); -static int -i915_gem_set_domain(struct drm_gem_object *obj, - struct drm_file *file_priv, - uint32_t read_domains, - uint32_t write_domain); +static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); +static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); +static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write); +static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, + int write); +static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, + uint64_t offset, + uint64_t size); +static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj); static int i915_gem_object_get_page_list(struct drm_gem_object *obj); static void i915_gem_object_free_page_list(struct drm_gem_object *obj); static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); @@ -164,8 +162,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_set_domain_range(obj, args->offset, args->size, - I915_GEM_DOMAIN_CPU, 0); + ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset, + args->size); if (ret != 0) { drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); @@ -321,8 +319,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev, struct drm_gem_object *obj, mutex_lock(&dev->struct_mutex); - ret = i915_gem_set_domain(obj, file_priv, - I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU); + ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret) { mutex_unlock(&dev->struct_mutex); return ret; @@ -439,8 +436,7 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, if (read_domains & I915_GEM_DOMAIN_GTT) { ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0); } else { - ret = i915_gem_set_domain(obj, file_priv, - read_domains, write_domain); + ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0); } drm_gem_object_unreference(obj); @@ -477,10 +473,9 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, obj_priv = obj->driver_private; /* Pinned buffers may be scanout, so flush the cache */ - if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - } + if (obj_priv->pin_count) + i915_gem_object_flush_cpu_write_domain(obj); + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; @@ -925,23 +920,10 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj) struct drm_i915_gem_object *obj_priv = obj->driver_private; int ret; - /* If there are writes queued to the buffer, flush and - * create a new seqno to wait for. + /* This function only exists to support waiting for existing rendering, + * not for emitting required flushes. */ - if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) { - uint32_t seqno, write_domain = obj->write_domain; -#if WATCH_BUF - DRM_INFO("%s: flushing object %p from write domain %08x\n", - __func__, obj, write_domain); -#endif - i915_gem_flush(dev, 0, write_domain); - - seqno = i915_add_request(dev, write_domain); - i915_gem_object_move_to_active(obj, seqno); -#if WATCH_LRU - DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj); -#endif - } + BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0); /* If there is rendering queued on the buffer being evicted, wait for * it. @@ -981,24 +963,16 @@ i915_gem_object_unbind(struct drm_gem_object *obj) return -EINVAL; } - /* Wait for any rendering to complete - */ - ret = i915_gem_object_wait_rendering(obj); - if (ret) { - DRM_ERROR("wait_rendering failed: %d\n", ret); - return ret; - } - /* Move the object to the CPU domain to ensure that * any possible CPU writes while it's not in the GTT * are flushed when we go to remap it. This will * also ensure that all pending GPU writes are finished * before we unbind. */ - ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU, - I915_GEM_DOMAIN_CPU); + ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret) { - DRM_ERROR("set_domain failed: %d\n", ret); + if (ret != -ERESTARTSYS) + DRM_ERROR("set_domain failed: %d\n", ret); return ret; } @@ -1259,6 +1233,51 @@ i915_gem_clflush_object(struct drm_gem_object *obj) drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE); } +/** Flushes any GPU write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + uint32_t seqno; + + if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0) + return; + + /* Queue the GPU write cache flushing we need. */ + i915_gem_flush(dev, 0, obj->write_domain); + seqno = i915_add_request(dev, obj->write_domain); + obj->write_domain = 0; + i915_gem_object_move_to_active(obj, seqno); +} + +/** Flushes the GTT write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj) +{ + if (obj->write_domain != I915_GEM_DOMAIN_GTT) + return; + + /* No actual flushing is required for the GTT write domain. Writes + * to it immediately go to main memory as far as we know, so there's + * no chipset flush. It also doesn't land in render cache. + */ + obj->write_domain = 0; +} + +/** Flushes the CPU write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + + if (obj->write_domain != I915_GEM_DOMAIN_CPU) + return; + + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + obj->write_domain = 0; +} + /** * Moves a single object to the GTT read, and possibly write domain. * @@ -1268,56 +1287,81 @@ i915_gem_clflush_object(struct drm_gem_object *obj) static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) { - struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; - uint32_t flush_domains; + int ret; - /* Figure out what GPU domains we need to flush or invalidate for - * moving to GTT. + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ + ret = i915_gem_object_wait_rendering(obj); + if (ret != 0) + return ret; + + /* If we're writing through the GTT domain, then CPU and GPU caches + * will need to be invalidated at next use. */ - flush_domains = obj->write_domain & I915_GEM_GPU_DOMAINS; + if (write) + obj->read_domains &= I915_GEM_DOMAIN_GTT; - /* Queue the GPU write cache flushing we need. */ - if (flush_domains != 0) { - uint32_t seqno; + i915_gem_object_flush_cpu_write_domain(obj); - obj->write_domain &= ~I915_GEM_GPU_DOMAINS; - i915_gem_flush(dev, 0, flush_domains); - seqno = i915_add_request(dev, flush_domains); - i915_gem_object_move_to_active(obj, seqno); + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); + obj->read_domains |= I915_GEM_DOMAIN_GTT; + if (write) { + obj->write_domain = I915_GEM_DOMAIN_GTT; + obj_priv->dirty = 1; } + return 0; +} + +/** + * Moves a single object to the CPU read, and possibly write domain. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) +{ + struct drm_device *dev = obj->dev; + int ret; + + i915_gem_object_flush_gpu_write_domain(obj); /* Wait on any GPU rendering and flushing to occur. */ - if (obj_priv->active) { - int ret; + ret = i915_gem_object_wait_rendering(obj); + if (ret != 0) + return ret; - ret = i915_wait_request(dev, obj_priv->last_rendering_seqno); - if (ret != 0) - return ret; - } + i915_gem_object_flush_gtt_write_domain(obj); - /* If we're writing through the GTT domain, then CPU and GPU caches - * will need to be invalidated at next use. + /* If we have a partially-valid cache of the object in the CPU, + * finish invalidating it and free the per-page flags. */ - if (write) - obj->read_domains &= ~(I915_GEM_GPU_DOMAINS | - I915_GEM_DOMAIN_CPU); + i915_gem_object_set_to_full_cpu_read_domain(obj); - /* Flush the CPU domain if it's dirty. */ - if (obj->write_domain & I915_GEM_DOMAIN_CPU) { + /* Flush the CPU cache if it's still invalid. */ + if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) { i915_gem_clflush_object(obj); drm_agp_chipset_flush(dev); - obj->write_domain &= ~I915_GEM_DOMAIN_CPU; + obj->read_domains |= I915_GEM_DOMAIN_CPU; } /* It should now be out of any other write domains, and we can update * the domain values for our changes. */ - BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); - obj->read_domains |= I915_GEM_DOMAIN_GTT; - if (write) - obj->write_domain = I915_GEM_DOMAIN_GTT; + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); + + /* If we're writing through the CPU, then the GPU read domains will + * need to be invalidated at next use. + */ + if (write) { + obj->read_domains &= I915_GEM_DOMAIN_CPU; + obj->write_domain = I915_GEM_DOMAIN_CPU; + } return 0; } @@ -1442,7 +1486,9 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, struct drm_i915_gem_object *obj_priv = obj->driver_private; uint32_t invalidate_domains = 0; uint32_t flush_domains = 0; - int ret; + + BUG_ON(read_domains & I915_GEM_DOMAIN_CPU); + BUG_ON(write_domain == I915_GEM_DOMAIN_CPU); #if WATCH_BUF DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", @@ -1479,34 +1525,11 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", __func__, flush_domains, invalidate_domains); #endif - /* - * If we're invaliding the CPU cache and flushing a GPU cache, - * then pause for rendering so that the GPU caches will be - * flushed before the cpu cache is invalidated - */ - if ((invalidate_domains & I915_GEM_DOMAIN_CPU) && - (flush_domains & ~(I915_GEM_DOMAIN_CPU | - I915_GEM_DOMAIN_GTT))) { - ret = i915_gem_object_wait_rendering(obj); - if (ret) - return ret; - } i915_gem_clflush_object(obj); } if ((write_domain | flush_domains) != 0) obj->write_domain = write_domain; - - /* If we're invalidating the CPU domain, clear the per-page CPU - * domain list as well. - */ - if (obj_priv->page_cpu_valid != NULL && - (write_domain != 0 || - read_domains & I915_GEM_DOMAIN_CPU)) { - drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, - DRM_MEM_DRIVER); - obj_priv->page_cpu_valid = NULL; - } obj->read_domains = read_domains; dev->invalidate_domains |= invalidate_domains; @@ -1521,43 +1544,91 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, } /** - * Set the read/write domain on a range of the object. + * Moves the object from a partially CPU read to a full one. * - * Currently only implemented for CPU reads, otherwise drops to normal - * i915_gem_object_set_domain(). + * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(), + * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU). */ -static int -i915_gem_object_set_domain_range(struct drm_gem_object *obj, - uint64_t offset, - uint64_t size, - uint32_t read_domains, - uint32_t write_domain) +static void +i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj) { + struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; - int ret, i; - if (obj->read_domains & I915_GEM_DOMAIN_CPU) - return 0; + if (!obj_priv->page_cpu_valid) + return; - if (read_domains != I915_GEM_DOMAIN_CPU || - write_domain != 0) - return i915_gem_object_set_domain(obj, - read_domains, write_domain); + /* If we're partially in the CPU read domain, finish moving it in. + */ + if (obj->read_domains & I915_GEM_DOMAIN_CPU) { + int i; + + for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) { + if (obj_priv->page_cpu_valid[i]) + continue; + drm_clflush_pages(obj_priv->page_list + i, 1); + } + drm_agp_chipset_flush(dev); + } - /* Wait on any GPU rendering to the object to be flushed. */ + /* Free the page_cpu_valid mappings which are now stale, whether + * or not we've got I915_GEM_DOMAIN_CPU. + */ + drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, + DRM_MEM_DRIVER); + obj_priv->page_cpu_valid = NULL; +} + +/** + * Set the CPU read domain on a range of the object. + * + * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's + * not entirely valid. The page_cpu_valid member of the object flags which + * pages have been flushed, and will be respected by + * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping + * of the whole object. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, + uint64_t offset, uint64_t size) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int i, ret; + + if (offset == 0 && size == obj->size) + return i915_gem_object_set_to_cpu_domain(obj, 0); + + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ ret = i915_gem_object_wait_rendering(obj); - if (ret) + if (ret != 0) return ret; + i915_gem_object_flush_gtt_write_domain(obj); + + /* If we're already fully in the CPU read domain, we're done. */ + if (obj_priv->page_cpu_valid == NULL && + (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0) + return 0; + /* Otherwise, create/clear the per-page CPU read domain flag if we're + * newly adding I915_GEM_DOMAIN_CPU + */ if (obj_priv->page_cpu_valid == NULL) { obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, DRM_MEM_DRIVER); - } + if (obj_priv->page_cpu_valid == NULL) + return -ENOMEM; + } else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) + memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE); /* Flush the cache on any pages that are still invalid from the CPU's * perspective. */ - for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) { + for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; + i++) { if (obj_priv->page_cpu_valid[i]) continue; @@ -1566,6 +1637,13 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj, obj_priv->page_cpu_valid[i] = 1; } + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); + + obj->read_domains |= I915_GEM_DOMAIN_CPU; + return 0; } @@ -1679,6 +1757,18 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, return -EINVAL; } + if (reloc.write_domain & I915_GEM_DOMAIN_CPU || + reloc.read_domains & I915_GEM_DOMAIN_CPU) { + DRM_ERROR("reloc with read/write CPU domains: " + "obj %p target %d offset %d " + "read %08x write %08x", + obj, reloc.target_handle, + (int) reloc.offset, + reloc.read_domains, + reloc.write_domain); + return -EINVAL; + } + if (reloc.write_domain && target_obj->pending_write_domain && reloc.write_domain != target_obj->pending_write_domain) { DRM_ERROR("Write domain conflict: " @@ -2157,11 +2247,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data, /* XXX - flush the CPU caches for pinned objects * as the X server doesn't manage domains yet */ - if (obj->write_domain & I915_GEM_DOMAIN_CPU) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - obj->write_domain = 0; - } + i915_gem_object_flush_cpu_write_domain(obj); args->offset = obj_priv->gtt_offset; drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); @@ -2263,29 +2349,6 @@ void i915_gem_free_object(struct drm_gem_object *obj) drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); } -static int -i915_gem_set_domain(struct drm_gem_object *obj, - struct drm_file *file_priv, - uint32_t read_domains, - uint32_t write_domain) -{ - struct drm_device *dev = obj->dev; - int ret; - uint32_t flush_domains; - - BUG_ON(!mutex_is_locked(&dev->struct_mutex)); - - ret = i915_gem_object_set_domain(obj, read_domains, write_domain); - if (ret) - return ret; - flush_domains = i915_gem_dev_set_domain(obj->dev); - - if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) - (void) i915_add_request(dev, flush_domains); - - return 0; -} - /** Unbinds all objects that are on the given buffer list. */ static int i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) -- cgit v1.2.3 From c0d90829288942fa06d7483f9e84059a64605da5 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 20 Nov 2008 23:11:08 -0800 Subject: drm/i915: Rename object_set_domain to object_set_to_gpu_domain Now that the CPU and GTT domain operations are isolated to their own functions, the previously general-purpose set_domain function is now used only to set GPU domains. It also has no failure cases, which is important as this eliminates any possible interruption of the computation of new object domains and subsequent emmission of the flushing instructions into the ring. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 39 ++++++++++++--------------------------- 1 file changed, 12 insertions(+), 27 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index f7e9f2c2934c..50c75327d567 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -33,10 +33,10 @@ #define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) -static int -i915_gem_object_set_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain); +static void +i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain); static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); @@ -1477,10 +1477,10 @@ i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) * MI_FLUSH * drm_agp_chipset_flush */ -static int -i915_gem_object_set_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain) +static void +i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; @@ -1540,7 +1540,6 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, obj->read_domains, obj->write_domain, dev->invalidate_domains, dev->flush_domains); #endif - return 0; } /** @@ -2043,24 +2042,10 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; - /* make sure all previous memory operations have passed */ - ret = i915_gem_object_set_domain(obj, - obj->pending_read_domains, - obj->pending_write_domain); - if (ret) { - /* As we've partially updated domains on our buffers, - * we have to emit the flush we've accumulated - * before exiting, or we'll have broken the - * active/flushing/inactive invariants. - * - * We'll potentially have some things marked as - * being in write domains that they actually aren't, - * but that should be merely a minor performance loss. - */ - flush_domains = i915_gem_dev_set_domain(dev); - (void)i915_add_request(dev, flush_domains); - goto err; - } + /* Compute new gpu domains and update invalidate/flushing */ + i915_gem_object_set_to_gpu_domain(obj, + obj->pending_read_domains, + obj->pending_write_domain); } i915_verify_inactive(dev, __FILE__, __LINE__); -- cgit v1.2.3 From 646f0f6e43bf6628b1f0f8ca6c0227ce72e8ef3c Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 20 Nov 2008 23:23:03 -0800 Subject: drm/i915: Move the execbuffer domain computations together This eliminates the dev_set_domain function and just in-lines it where its used, with the goal of moving the manipulation and use of invalidate_domains and flush_domains closer together. This also avoids calling add_request unless some domain has been flushed. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 65 +++++++++++++---------------------------- 1 file changed, 21 insertions(+), 44 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 50c75327d567..c171a2d93bb6 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1646,38 +1646,6 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, return 0; } -/** - * Once all of the objects have been set in the proper domain, - * perform the necessary flush and invalidate operations. - * - * Returns the write domains flushed, for use in flush tracking. - */ -static uint32_t -i915_gem_dev_set_domain(struct drm_device *dev) -{ - uint32_t flush_domains = dev->flush_domains; - - /* - * Now that all the buffers are synced to the proper domains, - * flush and invalidate the collected domains - */ - if (dev->invalidate_domains | dev->flush_domains) { -#if WATCH_EXEC - DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", - __func__, - dev->invalidate_domains, - dev->flush_domains); -#endif - i915_gem_flush(dev, - dev->invalidate_domains, - dev->flush_domains); - dev->invalidate_domains = 0; - dev->flush_domains = 0; - } - - return flush_domains; -} - /** * Pin an object to the GTT and evaluate the relocations landing in it. */ @@ -2002,13 +1970,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, return -EBUSY; } - /* Zero the gloabl flush/invalidate flags. These - * will be modified as each object is bound to the - * gtt - */ - dev->invalidate_domains = 0; - dev->flush_domains = 0; - /* Look up object handles and perform the relocations */ for (i = 0; i < args->buffer_count; i++) { object_list[i] = drm_gem_object_lookup(dev, file_priv, @@ -2039,10 +2000,17 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_verify_inactive(dev, __FILE__, __LINE__); + /* Zero the global flush/invalidate flags. These + * will be modified as new domains are computed + * for each object + */ + dev->invalidate_domains = 0; + dev->flush_domains = 0; + for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; - /* Compute new gpu domains and update invalidate/flushing */ + /* Compute new gpu domains and update invalidate/flush */ i915_gem_object_set_to_gpu_domain(obj, obj->pending_read_domains, obj->pending_write_domain); @@ -2050,8 +2018,19 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_verify_inactive(dev, __FILE__, __LINE__); - /* Flush/invalidate caches and chipset buffer */ - flush_domains = i915_gem_dev_set_domain(dev); + if (dev->invalidate_domains | dev->flush_domains) { +#if WATCH_EXEC + DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", + __func__, + dev->invalidate_domains, + dev->flush_domains); +#endif + i915_gem_flush(dev, + dev->invalidate_domains, + dev->flush_domains); + if (dev->flush_domains) + (void)i915_add_request(dev, dev->flush_domains); + } i915_verify_inactive(dev, __FILE__, __LINE__); @@ -2071,8 +2050,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, ~0); #endif - (void)i915_add_request(dev, flush_domains); - /* Exec the batchbuffer */ ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset); if (ret) { -- cgit v1.2.3 From ac94a962b24a88ea5d00f4697550d9982f300751 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 20 Nov 2008 23:30:27 -0800 Subject: drm/i915: Retry execbuffer pinning after clearing the GTT If we fail to pin all of the buffers in an execbuffer request, go through and clear the GTT and try again to see if its just a matter of fragmentation Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 57 +++++++++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index c171a2d93bb6..174c0c3ba0b0 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1087,6 +1087,19 @@ i915_gem_evict_something(struct drm_device *dev) return ret; } +static int +i915_gem_evict_everything(struct drm_device *dev) +{ + int ret; + + for (;;) { + ret = i915_gem_evict_something(dev); + if (ret != 0) + break; + } + return ret; +} + static int i915_gem_object_get_page_list(struct drm_gem_object *obj) { @@ -1173,7 +1186,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) ret = i915_gem_evict_something(dev); if (ret != 0) { - DRM_ERROR("Failed to evict a buffer %d\n", ret); + if (ret != -ERESTARTSYS) + DRM_ERROR("Failed to evict a buffer %d\n", ret); return ret; } goto search_free; @@ -1922,6 +1936,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, int ret, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains; + int pin_tries; #if WATCH_EXEC DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", @@ -1970,7 +1985,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, return -EBUSY; } - /* Look up object handles and perform the relocations */ + /* Look up object handles */ for (i = 0; i < args->buffer_count; i++) { object_list[i] = drm_gem_object_lookup(dev, file_priv, exec_list[i].handle); @@ -1980,17 +1995,39 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, ret = -EBADF; goto err; } + } - object_list[i]->pending_read_domains = 0; - object_list[i]->pending_write_domain = 0; - ret = i915_gem_object_pin_and_relocate(object_list[i], - file_priv, - &exec_list[i]); - if (ret) { - DRM_ERROR("object bind and relocate failed %d\n", ret); + /* Pin and relocate */ + for (pin_tries = 0; ; pin_tries++) { + ret = 0; + for (i = 0; i < args->buffer_count; i++) { + object_list[i]->pending_read_domains = 0; + object_list[i]->pending_write_domain = 0; + ret = i915_gem_object_pin_and_relocate(object_list[i], + file_priv, + &exec_list[i]); + if (ret) + break; + pinned = i + 1; + } + /* success */ + if (ret == 0) + break; + + /* error other than GTT full, or we've already tried again */ + if (ret != -ENOMEM || pin_tries >= 1) { + DRM_ERROR("Failed to pin buffers %d\n", ret); goto err; } - pinned = i + 1; + + /* unpin all of our buffers */ + for (i = 0; i < pinned; i++) + i915_gem_object_unpin(object_list[i]); + + /* evict everyone we can from the aperture */ + ret = i915_gem_evict_everything(dev); + if (ret) + goto err; } /* Set the pending read domains for the batch buffer to COMMAND */ -- cgit v1.2.3 From 0235439232cb6f8a54f8976aa8330c1c98ebad0b Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Wed, 26 Nov 2008 13:58:13 -0800 Subject: drm/i915: Return error in i915_gem_set_to_gtt_domain if we're not in the GTT. It's only for flushing caches appropriately for GTT access, not for actually getting it there. Prevents potential smashing of cpu read/write domains on unbound objects. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 174c0c3ba0b0..3fde82be014f 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -435,6 +435,13 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, #endif if (read_domains & I915_GEM_DOMAIN_GTT) { ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0); + + /* Silently promote "you're not bound, there was nothing to do" + * to success, since the client was just asking us to + * make sure everything was done. + */ + if (ret == -EINVAL) + ret = 0; } else { ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0); } @@ -1304,6 +1311,10 @@ i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) struct drm_i915_gem_object *obj_priv = obj->driver_private; int ret; + /* Not valid to be called on unbound objects. */ + if (obj_priv->gtt_space == NULL) + return -EINVAL; + i915_gem_object_flush_gpu_write_domain(obj); /* Wait on any GPU rendering and flushing to occur. */ ret = i915_gem_object_wait_rendering(obj); -- cgit v1.2.3 From 726c12f57d7e3ff43693d88e13b1ff02464c75d3 Mon Sep 17 00:00:00 2001 From: Joseph Myers Date: Wed, 3 Dec 2008 19:36:05 -0800 Subject: sparc64: Fix VIS emulation bugs This patch fixes some bugs in VIS emulation that cause the GCC test failure FAIL: gcc.target/sparc/pdist-3.c execution test for both 32-bit and 64-bit testing on hardware lacking these instructions. The emulation code for the pdist instruction uses RS1(insn) for both source registers rs1 and rs2, which is obviously wrong and leads to the instruction doing nothing (the observed problem), and further inspection of the code shows that RS1 uses a shift of 24 and RD a shift of 25, which clearly cannot both be right; examining SPARC documentation indicates the correct shift for RS1 is 14. This patch fixes the bug if single-stepping over the affected instruction in the debugger, but not if the testcase is run standalone. For that, Wind River has another patch I hope they will send as a followup to this patch submission. Signed-off-by: Joseph Myers Signed-off-by: David S. Miller --- arch/sparc64/kernel/visemul.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc64/kernel/visemul.c b/arch/sparc64/kernel/visemul.c index 9e05cb5cb855..69f8a35c6bcd 100644 --- a/arch/sparc64/kernel/visemul.c +++ b/arch/sparc64/kernel/visemul.c @@ -131,7 +131,7 @@ #define VIS_OPF_SHIFT 5 #define VIS_OPF_MASK (0x1ff << VIS_OPF_SHIFT) -#define RS1(INSN) (((INSN) >> 24) & 0x1f) +#define RS1(INSN) (((INSN) >> 14) & 0x1f) #define RS2(INSN) (((INSN) >> 0) & 0x1f) #define RD(INSN) (((INSN) >> 25) & 0x1f) @@ -445,7 +445,7 @@ static void pdist(struct pt_regs *regs, unsigned int insn) unsigned long i; rs1 = fpd_regval(f, RS1(insn)); - rs2 = fpd_regval(f, RS1(insn)); + rs2 = fpd_regval(f, RS2(insn)); rd = fpd_regaddr(f, RD(insn)); rd_val = *rd; -- cgit v1.2.3 From 1c594c05a75770ab53a329fc4eb99c797a4bc7d7 Mon Sep 17 00:00:00 2001 From: Wilfried Klaebe Date: Wed, 3 Dec 2008 20:57:19 -0800 Subject: b1isa: fix b1isa_exit() to really remove registered capi controllers On "/etc/init.d/capiutils stop", this oops happened. The oops happens on reading /proc/capi/controllers because capi_ctrl->procinfo is called for the wrongly not unregistered controller, which points to b1isa_procinfo(), which was removed on module unload. b1isa_exit() did not call b1isa_remove() for its controllers because io[0] == 0 on module unload despite having been 0x340 on module load. Besides, just removing the controllers that where added on module load time and not those that were added later via b1isa_add_card() is wrong too - the place where all added cards are found is isa_dev[]. relevant dmesg lines: [ 0.000000] Linux version 2.6.27.4 (w@shubashi) (gcc version 4.3.2 (Debian 4.3.2-1) ) #3 Thu Oct 30 16:49:03 CET 2008 [ 67.403555] CAPI Subsystem Rev 1.1.2.8 [ 68.529154] capifs: Rev 1.1.2.3 [ 68.563292] capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) [ 77.026936] b1: revision 1.1.2.2 [ 77.049992] b1isa: revision 1.1.2.3 [ 77.722655] kcapi: Controller [001]: b1isa-340 attached [ 77.722671] b1isa: AVM B1 ISA at i/o 0x340, irq 5, revision 255 [ 81.272669] b1isa-340: card 1 "B1" ready. [ 81.272683] b1isa-340: card 1 Protocol: DSS1 [ 81.272689] b1isa-340: card 1 Linetype: point to multipoint [ 81.272695] b1isa-340: B1-card (3.11-03) now active [ 81.272702] kcapi: card [001] "b1isa-340" ready. [ 153.721281] kcapi: card [001] down. [ 154.151889] BUG: unable to handle kernel paging request at e87af000 [ 154.152081] IP: [] [ 154.153292] *pde = 2655b067 *pte = 00000000 [ 154.153307] Oops: 0000 [#1] [ 154.153360] Modules linked in: rfcomm l2cap ppdev lp ipt_MASQUERADE tun capi capifs kernelcapi ac battery nfsd exportfs nfs lockd nfs_acl sunrpc sit tunnel4 bridge stp llc ipt_REJECT ipt_LOG xt_tcpudp xt_state iptable_filter iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables nls_utf8 isofs nls_base zlib_inflate loop ipv6 netconsole snd_via82xx dvb_usb_dib0700 gameport dib7000p dib7000m dvb_usb snd_ac97_codec ac97_bus dvb_core mt2266 snd_pcm tuner_xc2028 dib3000mc dibx000_common mt2060 dib0070 snd_page_alloc snd_mpu401_uart snd_seq_midi snd_seq_midi_event btusb snd_rawmidi bluetooth snd_seq snd_timer snd_seq_device snd via686a i2c_viapro soundcore i2c_core parport_pc parport button dm_mirror dm_log dm_snapshot floppy sg ohci1394 uhci_hcd ehci_hcd 8139too mii ieee1394 usbcore sr_mod cdrom sd_mod thermal processor fan [last unloaded: b1] [ 154.153360] [ 154.153360] Pid: 4132, comm: capiinit Not tainted (2.6.27.4 #3) [ 154.153360] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [ 154.153360] EIP is at 0xe87af000 [ 154.153360] EAX: e6b9ccc8 EBX: e6b9ccc8 ECX: e87a0c67 EDX: e87af000 [ 154.153360] ESI: e142bbc0 EDI: e87a56e0 EBP: e0505f0c ESP: e0505ee4 [ 154.153360] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 154.153360] Process capiinit (pid: 4132, ti=e0504000 task=d1196cf0 task.ti=e0504000) [ 154.153360] Stack: e879f650 00000246 e0505ef4 c01472eb e0505f0c 00000246 e7001780 fffffff4 [ 154.153360] fffffff4 e142bbc0 e0505f48 c01a56c6 00000400 b805e000 d102dc80 e142bbe0 [ 154.153360] 00000000 e87a56e0 00000246 e12617ac 00000000 00000000 e1261760 fffffffb [ 154.153360] Call Trace: [ 154.153360] [] ? controller_show+0x20/0x90 [kernelcapi] [ 154.153360] [] ? trace_hardirqs_on+0xb/0x10 [ 154.153360] [] ? seq_read+0x126/0x2f0 [ 154.153360] [] ? seq_read+0x0/0x2f0 [ 154.153360] [] ? proc_reg_read+0x5c/0x90 [ 154.153360] [] ? vfs_read+0x99/0x140 [ 154.153360] [] ? proc_reg_read+0x0/0x90 [ 154.153360] [] ? sys_read+0x3d/0x70 [ 154.153360] [] ? sysenter_do_call+0x12/0x35 [ 154.153360] ======================= [ 154.153360] Code: Bad EIP value. [ 154.153360] EIP: [] 0xe87af000 SS:ESP 0068:e0505ee4 [ 154.153360] ---[ end trace 23750b6c2862de94 ]--- Signed-off-by: Wilfried Klaebe Signed-off-by: Andrew Morton Acked-by: Karsten Keil Signed-off-by: David S. Miller --- drivers/isdn/hardware/avm/b1isa.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/isdn/hardware/avm/b1isa.c b/drivers/isdn/hardware/avm/b1isa.c index 1e288eeb5e2a..6461a32bc838 100644 --- a/drivers/isdn/hardware/avm/b1isa.c +++ b/drivers/isdn/hardware/avm/b1isa.c @@ -233,10 +233,8 @@ static void __exit b1isa_exit(void) int i; for (i = 0; i < MAX_CARDS; i++) { - if (!io[i]) - break; - - b1isa_remove(&isa_dev[i]); + if (isa_dev[i].resource[0].start) + b1isa_remove(&isa_dev[i]); } unregister_capi_driver(&capi_driver_b1isa); } -- cgit v1.2.3 From bd0914104c61a852baf469b2d807322e5d0459b4 Mon Sep 17 00:00:00 2001 From: Pascal Terjan Date: Mon, 1 Dec 2008 12:24:25 +0000 Subject: hysdn: fix writing outside the field on 64 bits ifa_local is assumed to be unsigned long which lead to writing the address at dev->dev_addr-2 instead of +2 noticed thanks to gcc: drivers/isdn/hysdn/hysdn_net.c: In function `net_open': drivers/isdn/hysdn/hysdn_net.c:91: warning: array subscript is below array bounds Signed-off-by: Pascal Terjan Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hysdn/hysdn_net.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c index cfa8fa5e44ab..3f2a0a20c19b 100644 --- a/drivers/isdn/hysdn/hysdn_net.c +++ b/drivers/isdn/hysdn/hysdn_net.c @@ -83,12 +83,12 @@ net_open(struct net_device *dev) /* Fill in the MAC-level header (if not already set) */ if (!card->mac_addr[0]) { - for (i = 0; i < ETH_ALEN - sizeof(unsigned long); i++) + for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[i] = 0xfc; if ((in_dev = dev->ip_ptr) != NULL) { struct in_ifaddr *ifa = in_dev->ifa_list; if (ifa != NULL) - memcpy(dev->dev_addr + (ETH_ALEN - sizeof(unsigned long)), &ifa->ifa_local, sizeof(unsigned long)); + memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local)); } } else memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN); -- cgit v1.2.3 From 5176da7e5318669220e4d2fa856223054a3efc9f Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 2 Dec 2008 05:07:01 +0000 Subject: enc28j60: Fix sporadic packet loss (corrected again) Packet data read from the RX buffer the when the RSV is at the end of the RX buffer does not warp around. This causes packet loss, as the actual data is never read. Fix this by calculating the right packet data location. Thanks to Shachar Shemesh for suggesting the fix. Signed-off-by: Baruch Siach Acked-by: Claudio Lanconelli Signed-off-by: David S. Miller --- drivers/net/enc28j60.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index e1b441effbbe..c414554ac321 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -568,6 +568,17 @@ static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end) return erxrdpt; } +/* + * Calculate wrap around when reading beyond the end of the RX buffer + */ +static u16 rx_packet_start(u16 ptr) +{ + if (ptr + RSV_SIZE > RXEND_INIT) + return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1); + else + return ptr + RSV_SIZE; +} + static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end) { u16 erxrdpt; @@ -938,8 +949,9 @@ static void enc28j60_hw_rx(struct net_device *ndev) skb->dev = ndev; skb_reserve(skb, NET_IP_ALIGN); /* copy the packet from the receive buffer */ - enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv), - len, skb_put(skb, len)); + enc28j60_mem_read(priv, + rx_packet_start(priv->next_pk_ptr), + len, skb_put(skb, len)); if (netif_msg_pktdata(priv)) dump_packet(__func__, skb->len, skb->data); skb->protocol = eth_type_trans(skb, ndev); -- cgit v1.2.3 From f8269a495a1924f8b023532dd3e77423432db810 Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Wed, 3 Dec 2008 21:24:48 -0800 Subject: tcp: make urg+gso work for real this time MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I should have noticed this earlier... :-) The previous solution to URG+GSO/TSO will cause SACK block tcp_fragment to do zig-zig patterns, or even worse, a steep downward slope into packet counting because each skb pcount would be truncated to pcount of 2 and then the following fragments of the later portion would restore the window again. Basically this reverts "tcp: Do not use TSO/GSO when there is urgent data" (33cf71cee1). It also removes some unnecessary code from tcp_current_mss that didn't work as intented either (could be that something was changed down the road, or it might have been broken since the dawn of time) because it only works once urg is already written while this bug shows up starting from ~64k before the urg point. The retransmissions already are split to mss sized chunks, so only new data sending paths need splitting in case they have a segment otherwise suitable for gso/tso. The actually check can be improved to be more narrow but since this is late -rc already, I'll postpone thinking the more fine-grained things. Signed-off-by: Ilpo Järvinen Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 85b07eba1879..fe3b4bdfd251 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -722,8 +722,7 @@ static void tcp_queue_skb(struct sock *sk, struct sk_buff *skb) static void tcp_set_skb_tso_segs(struct sock *sk, struct sk_buff *skb, unsigned int mss_now) { - if (skb->len <= mss_now || !sk_can_gso(sk) || - tcp_urg_mode(tcp_sk(sk))) { + if (skb->len <= mss_now || !sk_can_gso(sk)) { /* Avoid the costly divide in the normal * non-TSO case. */ @@ -1029,10 +1028,6 @@ unsigned int tcp_sync_mss(struct sock *sk, u32 pmtu) /* Compute the current effective MSS, taking SACKs and IP options, * and even PMTU discovery events into account. - * - * LARGESEND note: !tcp_urg_mode is overkill, only frames up to snd_up - * cannot be large. However, taking into account rare use of URG, this - * is not a big flaw. */ unsigned int tcp_current_mss(struct sock *sk, int large_allowed) { @@ -1047,7 +1042,7 @@ unsigned int tcp_current_mss(struct sock *sk, int large_allowed) mss_now = tp->mss_cache; - if (large_allowed && sk_can_gso(sk) && !tcp_urg_mode(tp)) + if (large_allowed && sk_can_gso(sk)) doing_tso = 1; if (dst) { @@ -1164,9 +1159,7 @@ static int tcp_init_tso_segs(struct sock *sk, struct sk_buff *skb, { int tso_segs = tcp_skb_pcount(skb); - if (!tso_segs || - (tso_segs > 1 && (tcp_skb_mss(skb) != mss_now || - tcp_urg_mode(tcp_sk(sk))))) { + if (!tso_segs || (tso_segs > 1 && tcp_skb_mss(skb) != mss_now)) { tcp_set_skb_tso_segs(sk, skb, mss_now); tso_segs = tcp_skb_pcount(skb); } @@ -1519,6 +1512,10 @@ static int tcp_mtu_probe(struct sock *sk) * send_head. This happens as incoming acks open up the remote * window for us. * + * LARGESEND note: !tcp_urg_mode is overkill, only frames between + * snd_up-64k-mss .. snd_up cannot be large. However, taking into + * account rare use of URG, this is not a big flaw. + * * Returns 1, if no segments are in flight and we have queued segments, but * cannot send anything now because of SWS or another problem. */ @@ -1570,7 +1567,7 @@ static int tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle) } limit = mss_now; - if (tso_segs > 1) + if (tso_segs > 1 && !tcp_urg_mode(tp)) limit = tcp_mss_split_point(sk, skb, mss_now, cwnd_quota); @@ -1619,6 +1616,7 @@ void __tcp_push_pending_frames(struct sock *sk, unsigned int cur_mss, */ void tcp_push_one(struct sock *sk, unsigned int mss_now) { + struct tcp_sock *tp = tcp_sk(sk); struct sk_buff *skb = tcp_send_head(sk); unsigned int tso_segs, cwnd_quota; @@ -1633,7 +1631,7 @@ void tcp_push_one(struct sock *sk, unsigned int mss_now) BUG_ON(!tso_segs); limit = mss_now; - if (tso_segs > 1) + if (tso_segs > 1 && !tcp_urg_mode(tp)) limit = tcp_mss_split_point(sk, skb, mss_now, cwnd_quota); -- cgit v1.2.3 From 2cc002c4bbce4d918ab94b494d61c6991c907d5e Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 3 Dec 2008 22:18:59 -0800 Subject: netx-eth: initialize per device spinlock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The spinlock used in the netx-eth driver was never properly initialized. This was noticed using CONFIG_DEBUG_SPINLOCK=y Signed-off-by: Uwe Kleine-König Acked-by: Sascha Hauer Signed-off-by: David S. Miller --- drivers/net/netx-eth.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c index b9bed82e1d21..b289a0a2b945 100644 --- a/drivers/net/netx-eth.c +++ b/drivers/net/netx-eth.c @@ -401,6 +401,8 @@ static int netx_eth_drv_probe(struct platform_device *pdev) priv->xmac_base = priv->xc->xmac_base; priv->sram_base = priv->xc->sram_base; + spin_lock_init(&priv->lock); + ret = pfifo_request(PFIFO_MASK(priv->id)); if (ret) { printk("unable to request PFIFO\n"); -- cgit v1.2.3 From 6c9bacb41c10ba84ff68f238e234d96f35fb64f7 Mon Sep 17 00:00:00 2001 From: john stultz Date: Mon, 1 Dec 2008 18:34:41 -0800 Subject: time: catch xtime_nsec underflows and fix them Impact: fix time warp bug Alex Shi, along with Yanmin Zhang have been noticing occasional time inconsistencies recently. Through their great diagnosis, they found that the xtime_nsec value used in update_wall_time was occasionally going negative. After looking through the code for awhile, I realized we have the possibility for an underflow when three conditions are met in update_wall_time(): 1) We have accumulated a second's worth of nanoseconds, so we incremented xtime.tv_sec and appropriately decrement xtime_nsec. (This doesn't cause xtime_nsec to go negative, but it can cause it to be small). 2) The remaining offset value is large, but just slightly less then cycle_interval. 3) clocksource_adjust() is speeding up the clock, causing a corrective amount (compensating for the increase in the multiplier being multiplied against the unaccumulated offset value) to be subtracted from xtime_nsec. This can cause xtime_nsec to underflow. Unfortunately, since we notify the NTP subsystem via second_overflow() whenever we accumulate a full second, and this effects the error accumulation that has already occured, we cannot simply revert the accumulated second from xtime nor move the second accumulation to after the clocksource_adjust call without a change in behavior. This leaves us with (at least) two options: 1) Simply return from clocksource_adjust() without making a change if we notice the adjustment would cause xtime_nsec to go negative. This would work, but I'm concerned that if a large adjustment was needed (due to the error being large), it may be possible to get stuck with an ever increasing error that becomes too large to correct (since it may always force xtime_nsec negative). This may just be paranoia on my part. 2) Catch xtime_nsec if it is negative, then add back the amount its negative to both xtime_nsec and the error. This second method is consistent with how we've handled earlier rounding issues, and also has the benefit that the error being added is always in the oposite direction also always equal or smaller then the correction being applied. So the risk of a corner case where things get out of control is lessened. This patch fixes bug 11970, as tested by Yanmin Zhang http://bugzilla.kernel.org/show_bug.cgi?id=11970 Reported-by: alex.shi@intel.com Signed-off-by: John Stultz Acked-by: "Zhang, Yanmin" Tested-by: "Zhang, Yanmin" Signed-off-by: Ingo Molnar --- kernel/time/timekeeping.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index e7acfb482a68..fa05e88aa76f 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -518,6 +518,28 @@ void update_wall_time(void) /* correct the clock when NTP error is too big */ clocksource_adjust(offset); + /* + * Since in the loop above, we accumulate any amount of time + * in xtime_nsec over a second into xtime.tv_sec, its possible for + * xtime_nsec to be fairly small after the loop. Further, if we're + * slightly speeding the clocksource up in clocksource_adjust(), + * its possible the required corrective factor to xtime_nsec could + * cause it to underflow. + * + * Now, we cannot simply roll the accumulated second back, since + * the NTP subsystem has been notified via second_overflow. So + * instead we push xtime_nsec forward by the amount we underflowed, + * and add that amount into the error. + * + * We'll correct this error next time through this function, when + * xtime_nsec is not as small. + */ + if (unlikely((s64)clock->xtime_nsec < 0)) { + s64 neg = -(s64)clock->xtime_nsec; + clock->xtime_nsec = 0; + clock->error += neg << (NTP_SCALE_SHIFT - clock->shift); + } + /* store full nanoseconds into xtime after rounding it up and * add the remainder to the error difference. */ -- cgit v1.2.3 From 94fc7336646b392234c0fafea5d696d020c3677c Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 4 Dec 2008 03:59:41 +0100 Subject: [ARM] 5339/1: fix __fls() on ARM Commit 0c65f459ce6c intended to fix truncation issues with fls() on ARMv5+ by renaming it to __fls() and wrapping it into a C function. However that didn't take into account the fact that __fls() already already had different semantics in the kernel. Let's move the __fls() code into fls() function directly, and redefine __fls() with the appropriate semantics. While at it, bring a generic __fls() definition for pre ARMv5 too. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/bitops.h | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index 9a1db20e032a..63a481fbbed4 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -237,6 +237,7 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset); #if __LINUX_ARM_ARCH__ < 5 #include +#include #include #include #include @@ -277,16 +278,19 @@ static inline int constant_fls(int x) * the clz instruction for much better code efficiency. */ -#define __fls(x) \ - ( __builtin_constant_p(x) ? constant_fls(x) : \ - ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) ) - -/* Implement fls() in C so that 64-bit args are suitably truncated */ static inline int fls(int x) { - return __fls(x); + int ret; + + if (__builtin_constant_p(x)) + return constant_fls(x); + + asm("clz\t%0, %1" : "=r" (ret) : "r" (x) : "cc"); + ret = 32 - ret; + return ret; } +#define __fls(x) (fls(x) - 1) #define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); }) #define __ffs(x) (ffs(x) - 1) #define ffz(x) __ffs( ~(x) ) -- cgit v1.2.3 From 50c396d38c1a7f0c693579ec88cb4be3c0b0645e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 30 Nov 2008 01:47:12 -0500 Subject: [PATCH] kill obsolete temporary comment in swsusp_close() it had been put there to mark the call of blkdev_put() that needed proper argument propagated to it; later patch in the same series had done just that. Signed-off-by: Al Viro --- kernel/power/swap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/power/swap.c b/kernel/power/swap.c index b7713b53d07a..6da14358537c 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -633,7 +633,7 @@ void swsusp_close(fmode_t mode) return; } - blkdev_put(resume_bdev, mode); /* move up */ + blkdev_put(resume_bdev, mode); } static int swsusp_header_init(void) -- cgit v1.2.3 From 1c925604e1038c7c65b91a92d14dc972b3a70a97 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Fri, 31 Oct 2008 22:39:46 +0100 Subject: [PATCH] Fix block dev compat ioctl handling Commit 33c2dca4957bd0da3e1af7b96d0758d97e708ef6 (trim file propagation in block/compat_ioctl.c) removed the handling of some ioctls from compat_blkdev_driver_ioctl. That caused them to be rejected as unknown by the compat layer. Signed-off-by: Andreas Schwab Cc: Al Viro Signed-off-by: Al Viro --- block/compat_ioctl.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c index 3d3e7a46f38c..d43e6087badc 100644 --- a/block/compat_ioctl.c +++ b/block/compat_ioctl.c @@ -677,6 +677,29 @@ static int compat_blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode, case DVD_WRITE_STRUCT: case DVD_AUTH: arg = (unsigned long)compat_ptr(arg); + /* These intepret arg as an unsigned long, not as a pointer, + * so we must not do compat_ptr() conversion. */ + case HDIO_SET_MULTCOUNT: + case HDIO_SET_UNMASKINTR: + case HDIO_SET_KEEPSETTINGS: + case HDIO_SET_32BIT: + case HDIO_SET_NOWERR: + case HDIO_SET_DMA: + case HDIO_SET_PIO_MODE: + case HDIO_SET_NICE: + case HDIO_SET_WCACHE: + case HDIO_SET_ACOUSTIC: + case HDIO_SET_BUSSTATE: + case HDIO_SET_ADDRESS: + case CDROMEJECT_SW: + case CDROM_SET_OPTIONS: + case CDROM_CLEAR_OPTIONS: + case CDROM_SELECT_SPEED: + case CDROM_SELECT_DISC: + case CDROM_MEDIA_CHANGED: + case CDROM_DRIVE_STATUS: + case CDROM_LOCKDOOR: + case CDROM_DEBUG: break; default: /* unknown ioctl number */ -- cgit v1.2.3 From ebbefc011e56bd85b4745d01e5b8d7d05d95ed5d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 5 Nov 2008 14:54:41 +0100 Subject: [PATCH] clean up blkdev_get a little bit The way the bd_claim for the FMODE_EXCL case is implemented is rather confusing. Clean it up to the most logical style. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/block_dev.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index db831efbdbbd..7c727523bc54 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1135,12 +1135,15 @@ static int blkdev_open(struct inode * inode, struct file * filp) if (res) return res; - if (!(filp->f_mode & FMODE_EXCL)) - return 0; + if (filp->f_mode & FMODE_EXCL) { + res = bd_claim(bdev, filp); + if (res) + goto out_blkdev_put; + } - if (!(res = bd_claim(bdev, filp))) - return 0; + return 0; + out_blkdev_put: blkdev_put(bdev, filp->f_mode); return res; } -- cgit v1.2.3 From fd4ce1acd0f8558033b1a6968001552bd7671e6d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 5 Nov 2008 14:58:42 +0100 Subject: [PATCH 1/2] kill FMODE_NDELAY_NOW Update FMODE_NDELAY before each ioctl call so that we can kill the magic FMODE_NDELAY_NOW. It would be even better to do this directly in setfl(), but for that we'd need to have FMODE_NDELAY for all files, not just block special files. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- block/compat_ioctl.c | 8 +++++++- drivers/scsi/sd.c | 2 +- drivers/scsi/sr.c | 2 +- fs/block_dev.c | 10 +++++++++- include/linux/fs.h | 1 - 5 files changed, 18 insertions(+), 5 deletions(-) diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c index d43e6087badc..67eb93cff699 100644 --- a/block/compat_ioctl.c +++ b/block/compat_ioctl.c @@ -722,8 +722,14 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg) struct backing_dev_info *bdi; loff_t size; + /* + * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have + * to updated it before every ioctl. + */ if (file->f_flags & O_NDELAY) - mode |= FMODE_NDELAY_NOW; + mode |= FMODE_NDELAY; + else + mode &= ~FMODE_NDELAY; switch (cmd) { case HDIO_GETGEO: diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index c9e1242eaf25..5081b3981d3c 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -757,7 +757,7 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode, * access to the device is prohibited. */ error = scsi_nonblockable_ioctl(sdp, cmd, p, - (mode & FMODE_NDELAY_NOW) != 0); + (mode & FMODE_NDELAY) != 0); if (!scsi_block_when_processing_errors(sdp) || !error) return error; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 62b6633e3a97..45b66b98a516 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -521,7 +521,7 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, * if it doesn't recognise the ioctl */ ret = scsi_nonblockable_ioctl(sdev, cmd, argp, - (mode & FMODE_NDELAY_NOW) != 0); + (mode & FMODE_NDELAY) != 0); if (ret != -ENODEV) return ret; return scsi_ioctl(sdev, cmd, argp); diff --git a/fs/block_dev.c b/fs/block_dev.c index 7c727523bc54..99e0ae1a4c78 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1206,8 +1206,16 @@ static long block_ioctl(struct file *file, unsigned cmd, unsigned long arg) { struct block_device *bdev = I_BDEV(file->f_mapping->host); fmode_t mode = file->f_mode; + + /* + * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have + * to updated it before every ioctl. + */ if (file->f_flags & O_NDELAY) - mode |= FMODE_NDELAY_NOW; + mode |= FMODE_NDELAY; + else + mode &= ~FMODE_NDELAY; + return blkdev_ioctl(bdev, mode, cmd, arg); } diff --git a/include/linux/fs.h b/include/linux/fs.h index 0dcdd9458f4b..b3345a90e11a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -79,7 +79,6 @@ extern int dir_notify_enable; #define FMODE_NDELAY ((__force fmode_t)32) #define FMODE_EXCL ((__force fmode_t)64) #define FMODE_WRITE_IOCTL ((__force fmode_t)128) -#define FMODE_NDELAY_NOW ((__force fmode_t)256) #define RW_MASK 1 #define RWA_MASK 2 -- cgit v1.2.3 From fc9161e54d0dbf799beff9692ea1cc6237162b85 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 5 Nov 2008 14:58:46 +0100 Subject: [PATCH 2/2] documnt FMODE_ constants Make sure all FMODE_ constants are documents, and ensure a coherent style for the already existing comments. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- include/linux/fs.h | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/include/linux/fs.h b/include/linux/fs.h index b3345a90e11a..4a853ef6fd35 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -63,21 +63,23 @@ extern int dir_notify_enable; #define MAY_ACCESS 16 #define MAY_OPEN 32 -#define FMODE_READ ((__force fmode_t)1) -#define FMODE_WRITE ((__force fmode_t)2) - -/* Internal kernel extensions */ -#define FMODE_LSEEK ((__force fmode_t)4) -#define FMODE_PREAD ((__force fmode_t)8) -#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */ - -/* File is being opened for execution. Primary users of this flag are - distributed filesystems that can use it to achieve correct ETXTBUSY - behavior for cross-node execution/opening_for_writing of files */ -#define FMODE_EXEC ((__force fmode_t)16) - -#define FMODE_NDELAY ((__force fmode_t)32) -#define FMODE_EXCL ((__force fmode_t)64) +/* file is open for reading */ +#define FMODE_READ ((__force fmode_t)1) +/* file is open for writing */ +#define FMODE_WRITE ((__force fmode_t)2) +/* file is seekable */ +#define FMODE_LSEEK ((__force fmode_t)4) +/* file can be accessed using pread/pwrite */ +#define FMODE_PREAD ((__force fmode_t)8) +#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */ +/* File is opened for execution with sys_execve / sys_uselib */ +#define FMODE_EXEC ((__force fmode_t)16) +/* File is opened with O_NDELAY (only set for block devices) */ +#define FMODE_NDELAY ((__force fmode_t)32) +/* File is opened with O_EXCL (only set for block devices) */ +#define FMODE_EXCL ((__force fmode_t)64) +/* File is opened using open(.., 3, ..) and is writeable only for ioctls + (specialy hack for floppy.c) */ #define FMODE_WRITE_IOCTL ((__force fmode_t)128) #define RW_MASK 1 -- cgit v1.2.3 From 2cbed8906fd1f3c6cc17cdf8aac1bfad2da7960c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 30 Nov 2008 01:33:57 -0500 Subject: [PATCH] fix bogus argument of blkdev_put() in pktcdvd final close of ->bdev should match the initial open, i.e. get FMODE_READ | FMODE_NDELAY; FMODE_READ|FMODE_WRITE has been a braino. Signed-off-by: Al Viro --- drivers/block/pktcdvd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index f20bf359b84f..edda7b6b077b 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -2790,7 +2790,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev) return 0; out_mem: - blkdev_put(bdev, FMODE_READ|FMODE_WRITE); + blkdev_put(bdev, FMODE_READ | FMODE_NDELAY); /* This is safe: open() is still holding a reference. */ module_put(THIS_MODULE); return ret; @@ -2975,7 +2975,7 @@ static int pkt_remove_dev(dev_t pkt_dev) pkt_debugfs_dev_remove(pd); pkt_sysfs_dev_remove(pd); - blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE); + blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY); remove_proc_entry(pd->name, pkt_proc); DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name); -- cgit v1.2.3 From 9adc13867ec5fe0cd35434f92954d90e42381f0b Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 4 Dec 2008 13:33:35 +0100 Subject: x86: fix early panic with boot option "nosmp" Impact: fix boot crash with numcpus=0 on certain systems Fix early exception in __get_smp_config with nosmp. Bail out early when there is no MP table. Reported-by: Wu Fengguang Signed-off-by: Andi Kleen Tested-by: Wu Fengguang Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index f98f4e1dba09..0f4c1fd5a1f4 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -604,6 +604,9 @@ static void __init __get_smp_config(unsigned int early) printk(KERN_INFO "Using ACPI for processor (LAPIC) " "configuration information\n"); + if (!mpf) + return; + printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) -- cgit v1.2.3 From 410d2c8187ed969238ba98008c1d57307a56cfd8 Mon Sep 17 00:00:00 2001 From: "Hong H. Pham" Date: Thu, 4 Dec 2008 09:12:57 -0800 Subject: sparc64: Sync FPU state in VIS emulation handler. Copy the FPU state to the task's thread_info->fpregs for the VIS emulation functions to access. Signed-off-by: Hong H. Pham Signed-off-by: David S. Miller --- arch/sparc64/kernel/visemul.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sparc64/kernel/visemul.c b/arch/sparc64/kernel/visemul.c index 69f8a35c6bcd..b956fd71c131 100644 --- a/arch/sparc64/kernel/visemul.c +++ b/arch/sparc64/kernel/visemul.c @@ -807,6 +807,8 @@ int vis_emul(struct pt_regs *regs, unsigned int insn) if (get_user(insn, (u32 __user *) pc)) return -EFAULT; + save_and_clear_fpu(); + opf = (insn & VIS_OPF_MASK) >> VIS_OPF_SHIFT; switch (opf) { default: -- cgit v1.2.3 From e807f9574e37a3f202e677feaaad1b7c5d2c0db8 Mon Sep 17 00:00:00 2001 From: Vlad Malov Date: Tue, 18 Nov 2008 15:05:46 -0800 Subject: MIPS: Fix potential DOS by untrusted user app. On a 64 bit kernel if an o32 syscall was made with a syscall number less than 4000, we would read the function from outside of the bounds of the syscall table. This led to non-deterministic behavior including system crashes. While we were at it we reworked the 32 bit version as well to use fewer instructions. Both 32 and 64 bit versions are use the same code now. Signed-off-by: Vlad Malov Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall32-o32.S | 5 +---- arch/mips/kernel/scall64-o32.S | 12 +++++------- 2 files changed, 6 insertions(+), 11 deletions(-) diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 759f68066b5d..34a4dbd76f24 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -262,14 +262,11 @@ bad_alignment: LEAF(sys_syscall) subu t0, a0, __NR_O32_Linux # check syscall number sltiu v0, t0, __NR_O32_Linux_syscalls + 1 + beqz t0, einval # do not recurse sll t1, t0, 3 beqz v0, einval - lw t2, sys_call_table(t1) # syscall routine - li v1, 4000 - __NR_O32_Linux # index of sys_syscall - beq t0, v1, einval # do not recurse - /* Some syscalls like execve get their arguments from struct pt_regs and claim zero arguments in the syscall table. Thus we have to assume the worst case and shuffle around all potential arguments. diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 6c7ef8313ebd..facb41a76d1b 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -174,14 +174,12 @@ not_o32_scall: END(handle_sys) LEAF(sys32_syscall) - sltu v0, a0, __NR_O32_Linux + __NR_O32_Linux_syscalls + 1 + subu t0, a0, __NR_O32_Linux # check syscall number + sltiu v0, t0, __NR_O32_Linux_syscalls + 1 + beqz t0, einval # do not recurse + dsll t1, t0, 3 beqz v0, einval - - dsll v0, a0, 3 - ld t2, (sys_call_table - (__NR_O32_Linux * 8))(v0) - - li v1, 4000 # indirect syscall number - beq a0, v1, einval # do not recurse + ld t2, sys_call_table(t1) # syscall routine move a0, a1 # shift argument registers move a1, a2 -- cgit v1.2.3 From 192cc7f0900a088e464635a59a63d974ee7a3e97 Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Tue, 25 Nov 2008 16:33:20 +0800 Subject: MIPS: Malta: Add back RTC support With the conversion of MIPS to RTC_LIB the old RTC driver CONFIG_RTC became unselectable. Fix by setting up a platform device. Also enable RTC_CLASS so system time gets set from RTC on kernel initialization. [Ralf: Original patch by Tiejun; polished nice and shiny by me] Signed-off-by: Tiejun Chen Signed-off-by: Ralf Baechle --- arch/mips/configs/malta_defconfig | 39 +++++++++++++++++++++++-- arch/mips/mti-malta/malta-platform.c | 56 ++++++++++++++++++++++++++++++------ 2 files changed, 84 insertions(+), 11 deletions(-) diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 74daa0cf87e6..a69956573d17 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1126,7 +1126,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m -CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set @@ -1199,7 +1198,43 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# # # DMA Engine support diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c index 83b9bab3cd3f..6a476f7733b3 100644 --- a/arch/mips/mti-malta/malta-platform.c +++ b/arch/mips/mti-malta/malta-platform.c @@ -6,7 +6,10 @@ * Copyright (C) 2007 MIPS Technologies, Inc. * written by Ralf Baechle (ralf@linux-mips.org) * - * Probe driver for the Malta's UART ports: + * Copyright (C) 2008 Wind River Systems, Inc. + * updated by Tiejun Chen + * + * 1. Probe driver for the Malta's UART ports: * * o 2 ports in the SMC SuperIO * o 1 port in the CBUS UART, a discrete 16550 which normally is only used @@ -14,10 +17,14 @@ * * We don't use 8250_platform.c on Malta as it would result in the CBUS * UART becoming ttyS0. + * + * 2. Register RTC-CMOS platform device on Malta. */ #include #include #include +#include +#include #define SMC_PORT(base, int) \ { \ @@ -45,7 +52,7 @@ static struct plat_serial8250_port uart8250_data[] = { { }, }; -static struct platform_device uart8250_device = { +static struct platform_device malta_uart8250_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM2, .dev = { @@ -53,13 +60,44 @@ static struct platform_device uart8250_device = { }, }; -static int __init uart8250_init(void) +struct resource malta_rtc_resources[] = { + { + .start = RTC_PORT(0), + .end = RTC_PORT(7), + .flags = IORESOURCE_IO, + }, { + .start = RTC_IRQ, + .end = RTC_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device malta_rtc_device = { + .name = "rtc_cmos", + .id = -1, + .resource = malta_rtc_resources, + .num_resources = ARRAY_SIZE(malta_rtc_resources), +}; + +static struct platform_device *malta_devices[] __initdata = { + &malta_uart8250_device, + &malta_rtc_device, +}; + +static int __init malta_add_devices(void) { - return platform_device_register(&uart8250_device); -} + int err; -module_init(uart8250_init); + err = platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices)); + if (err) + return err; + + /* + * Set RTC to BCD mode to support current alarm code. + */ + CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL); + + return 0; +} -MODULE_AUTHOR("Ralf Baechle "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART"); +device_initcall(malta_add_devices); -- cgit v1.2.3 From 3e27cce60e434fc393fb261fb3ca455ba80a0b8b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 1 Dec 2008 08:09:10 +0000 Subject: MIPS: IP22, Fulong, Malta: Update defconfigs. These haven't seen much attention for too long but particularly important enable RTC_CLASS and CONFIG_RTC_HCTOSYS so the wall clock time is set on kernel startup. Signed-off-by: Ralf Baechle --- arch/mips/configs/fulong_defconfig | 921 +++++++++++++++++++++---------------- arch/mips/configs/ip22_defconfig | 518 ++++++++++++++------- arch/mips/configs/malta_defconfig | 616 ++++++++++++++++--------- 3 files changed, 1273 insertions(+), 782 deletions(-) diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig index 620980081a30..b6698a232ae9 100644 --- a/arch/mips/configs/fulong_defconfig +++ b/arch/mips/configs/fulong_defconfig @@ -1,63 +1,78 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc4 -# Mon Jun 11 00:23:51 2007 +# Linux kernel version: 2.6.28-rc6 +# Fri Nov 28 17:53:48 2008 # CONFIG_MIPS=y # # Machine selection # -CONFIG_LEMOTE_FULONG=y # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +CONFIG_LEMOTE_FULONG=y # CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set +# CONFIG_MACH_EMMA is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set CONFIG_I8259=y # CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_HAVE_STD_PC_SERIAL_PORT=y # # CPU selection @@ -75,6 +90,7 @@ CONFIG_CPU_LOONGSON2=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -101,7 +117,6 @@ CONFIG_BOARD_SCACHE=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_WB=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -109,6 +124,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -117,9 +133,17 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -133,37 +157,40 @@ CONFIG_HZ=250 CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="lm32" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +CONFIG_USER_NS=y +CONFIG_PID_NS=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -175,6 +202,8 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -183,29 +212,33 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -219,19 +252,19 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_ISA=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -239,8 +272,9 @@ CONFIG_MMU=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -251,14 +285,12 @@ CONFIG_BINFMT_ELF32=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_NET=y # @@ -271,6 +303,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -294,18 +327,17 @@ CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration @@ -313,53 +345,59 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK_ENABLED is not set # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set CONFIG_NETFILTER_XT_MATCH_ESP=m +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -371,6 +409,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -380,10 +419,6 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -392,23 +427,25 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_PHONET=m +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m # CONFIG_IEEE80211_CRYPT_CCMP is not set # CONFIG_IEEE80211_CRYPT_TKIP is not set -# CONFIG_IEEE80211_SOFTMAC is not set # CONFIG_RFKILL is not set +CONFIG_NET_9P=m +# CONFIG_NET_9P_DEBUG is not set # # Device Drivers @@ -417,14 +454,13 @@ CONFIG_IEEE80211_CRYPT_WEP=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set @@ -443,6 +479,7 @@ CONFIG_MTD_BLOCK=m # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -482,6 +519,7 @@ CONFIG_MTD_PHYSMAP=m CONFIG_MTD_PHYSMAP_START=0x1fc00000 CONFIG_MTD_PHYSMAP_LEN=0x80000 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -506,21 +544,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# # CONFIG_PNP is not set -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -534,32 +560,28 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -568,24 +590,25 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -601,17 +624,28 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set + +# +# Other IDE chipsets support +# + +# +# Note: most of these also require special kernel boot parameters +# +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_QD65XX is not set +# CONFIG_BLK_DEV_UMC8672 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -644,88 +678,30 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +CONFIG_MACVLAN=m # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +CONFIG_VETH=m # CONFIG_ARCNET is not set CONFIG_PHYLIB=m @@ -740,29 +716,32 @@ CONFIG_CICADA_PHY=m # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -773,7 +752,6 @@ CONFIG_NET_PCI=y # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -785,15 +763,21 @@ CONFIG_8139TOO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -801,20 +785,29 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -822,6 +815,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -830,7 +824,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -844,25 +837,17 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y CONFIG_NET_FC=y -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -870,6 +855,7 @@ CONFIG_NET_FC=y # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -879,7 +865,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -900,9 +885,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set @@ -927,10 +914,13 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -951,105 +941,152 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set CONFIG_I2C_VIAPRO=m + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set -# CONFIG_HWMON is not set +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_CUSTOMIZE=y +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEOBUF_DMA_CONTIG=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_BT848 is not set @@ -1058,17 +1095,46 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set -# CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_IVTV is not set # CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_MT9M001=m +CONFIG_SOC_CAMERA_MT9M111=m +CONFIG_SOC_CAMERA_MT9V022=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_SH_MOBILE_CEU=m CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_ZC3XX=m # CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_USBVISION is not set @@ -1079,7 +1145,6 @@ CONFIG_USB_KONICAWC=m CONFIG_USB_QUICKCAM_MESSENGER=m CONFIG_USB_ET61X251=m # CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set CONFIG_USB_OV511=m CONFIG_USB_SE401=m CONFIG_USB_SN9C102=m @@ -1088,6 +1153,8 @@ CONFIG_USB_ZC0301=m CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set # CONFIG_USB_ZR364XX is not set +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set @@ -1104,33 +1171,30 @@ CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set # CONFIG_USB_DSBR is not set -# CONFIG_DVB_CORE is not set +CONFIG_USB_SI470X=m +CONFIG_USB_MR800=m CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y @@ -1158,16 +1222,30 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_SMIVGX is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -1176,20 +1254,14 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1201,28 +1273,22 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_RTCTIMER=m -CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=m CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -1231,10 +1297,12 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set @@ -1259,6 +1327,7 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -1276,43 +1345,26 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_TRIDENT is not set CONFIG_SND_VIA82XX=m # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# ALSA MIPS devices -# - -# -# USB devices -# +CONFIG_SND_MIPS=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # @@ -1322,13 +1374,39 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MOUSE is not set # -# USB support -# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BRIGHT=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DELL=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GYRATION=m +CONFIG_HID_LOGITECH=m +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -1338,35 +1416,46 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers # +CONFIG_USB_C67X00_HCD=m CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_ISP1760_HCD=m CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=m +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=y CONFIG_USB_PRINTER=y +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1379,7 +1468,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_STORAGE_KARMA is not set +CONFIG_USB_STORAGE_CYPRESS_ATACB=y CONFIG_USB_LIBUSUAL=y # @@ -1387,15 +1478,10 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1404,7 +1490,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +CONFIG_USB_SEVSEG=m # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1421,56 +1507,75 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_VST=m # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set # -# Real Time Clock +# I2C RTC drivers # -# CONFIG_RTC_CLASS is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # -# DMA Engine support +# SPI RTC drivers # -# CONFIG_DMA_ENGINE is not set # -# DMA Clients +# Platform RTC drivers # +CONFIG_RTC_DRV_CMOS=m +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Devices +# on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +CONFIG_UIO=m +CONFIG_UIO_CIF=m +# CONFIG_UIO_PDRV is not set +# CONFIG_UIO_PDRV_GENIRQ is not set +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1478,27 +1583,31 @@ CONFIG_USB_LIBUSUAL=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4DEV_COMPAT=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_FS_XIP=y CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +CONFIG_FS_MBCACHE=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y @@ -1530,11 +1639,11 @@ CONFIG_NTFS_RW=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1550,25 +1659,23 @@ CONFIG_RAMFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_OMFS_FS=m # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m @@ -1576,7 +1683,7 @@ CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1616,10 +1723,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1660,30 +1763,31 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +CONFIG_DYNAMIC_PRINTK_DEBUG=y +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -1691,64 +1795,113 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +CONFIG_SECURITY_FILE_CAPABILITIES=y +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y +CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=m +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_LZO=m # -# Hardware crypto devices +# Random Number Generation # +CONFIG_CRYPTO_ANSI_CPRNG=m +# CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y +CONFIG_CRC7=m # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index f719bf5e01aa..115822876417 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -1,30 +1,34 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Tue Aug 7 12:39:49 2007 +# Linux kernel version: 2.6.28-rc6 +# Fri Nov 28 15:41:33 2008 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set +# CONFIG_MACH_EMMA is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set CONFIG_SGI_IP22=y # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -35,34 +39,49 @@ CONFIG_SGI_IP22=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_ARC=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +CONFIG_I8259=y # CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y +CONFIG_SGI_HAS_INDYDOG=y +CONFIG_SGI_HAS_HAL2=y +CONFIG_SGI_HAS_SEEQ=y +CONFIG_SGI_HAS_WD93=y +CONFIG_SGI_HAS_ZILOG=y +CONFIG_SGI_HAS_I8042=y +CONFIG_DEFAULT_SGI_PARTITION=y CONFIG_ARC32=y CONFIG_BOOT_ELF32=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_L1_CACHE_SHIFT=7 CONFIG_ARC_CONSOLE=y CONFIG_ARC_PROMLIB=y @@ -82,6 +101,7 @@ CONFIG_ARC_PROMLIB=y # CONFIG_CPU_TX49XX is not set CONFIG_CPU_R5000=y # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -115,18 +135,24 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -159,13 +185,20 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -177,6 +210,8 @@ CONFIG_KALLSYMS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,14 +220,21 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -203,6 +245,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -216,6 +259,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -224,29 +269,24 @@ CONFIG_HW_HAS_EISA=y # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_EISA is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_I8253=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set - -# -# Networking -# CONFIG_NET=y # @@ -259,6 +299,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -282,42 +324,13 @@ CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y -CONFIG_IP_VS=m -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -334,12 +347,16 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_PIMSM_V2=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration @@ -347,12 +364,12 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m CONFIG_NF_CT_PROTO_UDPLITE=m @@ -366,18 +383,22 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -386,39 +407,75 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -426,11 +483,13 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m @@ -439,32 +498,30 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -479,6 +536,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -488,12 +546,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# CONFIG_NET_SCHED=y -CONFIG_NET_SCH_FIFO=y # # Queueing/Scheduling @@ -502,7 +555,7 @@ CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RR=m +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -526,6 +579,7 @@ CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m # CONFIG_NET_EMATCH is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y @@ -533,35 +587,28 @@ CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m -CONFIG_NET_CLS_POLICE=y +CONFIG_NET_ACT_SKBEDIT=m # CONFIG_NET_CLS_IND is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_PHONET=m CONFIG_FIB_RULES=y - -# -# Wireless -# -CONFIG_CFG80211=m +# CONFIG_WIRELESS is not set CONFIG_WIRELESS_EXT=y -CONFIG_MAC80211=m -# CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set CONFIG_RFKILL=m CONFIG_RFKILL_INPUT=m # CONFIG_NET_9P is not set @@ -588,7 +635,9 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -628,20 +677,22 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_IFB is not set CONFIG_DUMMY=m CONFIG_BONDING=m CONFIG_MACVLAN=m CONFIG_EQUALIZER=m CONFIG_TUN=m +CONFIG_VETH=m CONFIG_PHYLIB=m # @@ -656,11 +707,21 @@ CONFIG_CICADA_PHY=m # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_REALTEK_PHY=m +CONFIG_MDIO_BITBANG=m CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=m # CONFIG_AX88796 is not set +CONFIG_SMC91X=m # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set CONFIG_SGISEEQ=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -672,12 +733,12 @@ CONFIG_WLAN_PRE80211=y CONFIG_STRIP=m CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set +# CONFIG_IWLWIFI_LEDS is not set CONFIG_HOSTAP=m # CONFIG_HOSTAP_FIRMWARE is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -699,7 +760,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -720,6 +780,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y # CONFIG_MOUSE_PS2_SYNAPTICS is not set # CONFIG_MOUSE_PS2_LIFEBOOK is not set CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -742,9 +803,11 @@ CONFIG_SERIO_RAW=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -761,6 +824,17 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=m CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -769,47 +843,50 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set CONFIG_INDYDOG=m -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_R3964 is not set -CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_SSB_POSSIBLE=y # -# SPI support +# Sonics Silicon Backplane # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -823,48 +900,77 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_SGI_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +CONFIG_HID_PID=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +CONFIG_RTC_DRV_DS1286=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -876,29 +982,33 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4DEV_COMPAT=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y -CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=m -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m @@ -929,11 +1039,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=m # @@ -949,27 +1059,25 @@ CONFIG_CONFIGFS_FS=m CONFIG_EFS_FS=m # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m @@ -977,7 +1085,7 @@ CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -986,12 +1094,12 @@ CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +CONFIG_CIFS_UPCALL=y # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -1015,10 +1123,6 @@ CONFIG_SGI_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1059,30 +1163,32 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# CONFIG_DLM=m # CONFIG_DLM_DEBUG is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set + +# +# Tracers +# +CONFIG_DYNAMIC_PRINTK_DEBUG=y +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -1091,46 +1197,97 @@ CONFIG_CMDLINE="" CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +CONFIG_SECURITY_FILE_CAPABILITIES=y CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ABLKCIPHER=m -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m # CONFIG_CRYPTO_HW is not set # @@ -1139,12 +1296,15 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_BITREVERSE=m # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_T10DIF=m +CONFIG_CRC_ITU_T=m CONFIG_CRC32=m # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index a69956573d17..1ecdd3b65dc7 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Tue Aug 7 12:59:29 2007 +# Linux kernel version: 2.6.28-rc6 +# Mon Dec 1 08:08:19 2008 # CONFIG_MIPS=y @@ -11,20 +11,25 @@ CONFIG_MIPS=y CONFIG_ZONE_DMA=y # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set CONFIG_MIPS_MALTA=y # CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set +# CONFIG_MACH_EMMA is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -35,13 +40,14 @@ CONFIG_MIPS_MALTA=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -51,21 +57,26 @@ CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_BOOT_RAW=y CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_GENERIC_ISA_DMA=y +# CONFIG_HOTPLUG_CPU is not set CONFIG_I8259=y CONFIG_MIPS_BONITO64=y CONFIG_MIPS_MSC=y # CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_ISA_DMA=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y +CONFIG_IRQ_GIC=y +CONFIG_MIPS_BOARDS_GEN=y CONFIG_PCI_GT64XXX_PCI0=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y @@ -74,10 +85,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set CONFIG_CPU_MIPS32_R2=y @@ -91,6 +98,7 @@ CONFIG_CPU_MIPS32_R2=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -108,6 +116,7 @@ CONFIG_CPU_MIPSR2=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type @@ -125,6 +134,8 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_SMP=y # CONFIG_MIPS_MT_SMTC is not set CONFIG_MIPS_MT=y +# CONFIG_SCHED_SMT is not set +CONFIG_SYS_SUPPORTS_SCHED_SMT=y CONFIG_SYS_SUPPORTS_MULTITHREADING=y CONFIG_MIPS_MT_FPAFF=y # CONFIG_MIPS_VPE_LOADER is not set @@ -132,7 +143,6 @@ CONFIG_CPU_HAS_LLSC=y # CONFIG_CPU_HAS_SMARTMIPS is not set CONFIG_CPU_MIPSR2_IRQ_VI=y CONFIG_CPU_MIPSR2_IRQ_EI=y -CONFIG_CPU_MIPSR2_SRS=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -140,22 +150,30 @@ CONFIG_IRQ_PER_CPU=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_SYS_SUPPORTS_SMARTMIPS=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_SMP=y +CONFIG_SMP_UP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_2=y CONFIG_NR_CPUS=2 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set CONFIG_HZ_100=y # CONFIG_HZ_128 is not set @@ -168,7 +186,6 @@ CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y # CONFIG_KEXEC is not set CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y @@ -189,13 +206,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_CPUSETS is not set +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +CONFIG_PID_NS=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -207,6 +230,8 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -215,14 +240,23 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -234,6 +268,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -247,19 +282,19 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y CONFIG_I8253=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -267,6 +302,8 @@ CONFIG_I8253=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y @@ -274,12 +311,7 @@ CONFIG_TRAD_SIGNALS=y # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set - -# -# Networking -# CONFIG_NET=y # @@ -292,6 +324,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -323,42 +357,13 @@ CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y -CONFIG_IP_VS=m -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -375,11 +380,15 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_PIMSM_V2=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y # @@ -388,12 +397,12 @@ CONFIG_BRIDGE_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m CONFIG_NF_CT_PROTO_UDPLITE=m @@ -407,18 +416,22 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m -# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -427,40 +440,76 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -468,11 +517,13 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m @@ -481,40 +532,34 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m - -# -# Bridge: Netfilter Configuration -# CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -523,6 +568,7 @@ CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m @@ -535,6 +581,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set @@ -544,8 +591,12 @@ CONFIG_IP_SCTP=m CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m +CONFIG_GARP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set @@ -559,12 +610,7 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# CONFIG_NET_SCHED=y -CONFIG_NET_SCH_FIFO=y # # Queueing/Scheduling @@ -573,7 +619,7 @@ CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RR=m +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -597,6 +643,7 @@ CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m # CONFIG_NET_EMATCH is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y @@ -604,37 +651,51 @@ CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m -CONFIG_NET_CLS_POLICE=y +CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_PHONET=m CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=m -# CONFIG_MAC80211_DEBUG is not set + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set CONFIG_RFKILL=m CONFIG_RFKILL_INPUT=m +CONFIG_RFKILL_LEDS=y # CONFIG_NET_9P is not set # @@ -644,9 +705,12 @@ CONFIG_RFKILL_INPUT=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m CONFIG_MTD=y @@ -655,6 +719,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -667,6 +732,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +CONFIG_MTD_OOPS=m # # RAM/ROM/Flash chip drivers @@ -701,6 +767,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -748,25 +815,26 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -775,24 +843,25 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -808,10 +877,7 @@ CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set CONFIG_BLK_DEV_TC86C001=m -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -848,8 +914,10 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m +# CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_BLK_DEV_3W_XXXX_RAID=m @@ -866,6 +934,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -876,6 +945,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -887,6 +957,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -905,32 +976,28 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m # CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y CONFIG_IFB=m CONFIG_DUMMY=m CONFIG_BONDING=m CONFIG_MACVLAN=m CONFIG_EQUALIZER=m CONFIG_TUN=m +CONFIG_VETH=m # CONFIG_ARCNET is not set CONFIG_PHYLIB=m @@ -946,26 +1013,34 @@ CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=m CONFIG_ICPLUS_PHY=m -# CONFIG_FIXED_PHY is not set +CONFIG_REALTEK_PHY=m +CONFIG_MDIO_BITBANG=m CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_AX88796=m +# CONFIG_AX88796_93CX6 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y -# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=m -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -973,16 +1048,21 @@ CONFIG_TC35815=m # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -995,14 +1075,24 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3=m +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set CONFIG_NETXEN_NIC=m +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -1022,6 +1112,7 @@ CONFIG_IPW2200_QOS=y # CONFIG_IPW2200_DEBUG is not set CONFIG_LIBERTAS=m # CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_THINFIRM is not set CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m @@ -1030,25 +1121,30 @@ CONFIG_PCI_HERMES=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m CONFIG_PRISM54=m +# CONFIG_RTL8180 is not set +# CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH9K is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWLAGN is not set +# CONFIG_IWL3945 is not set CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y CONFIG_HOSTAP_PLX=m CONFIG_HOSTAP_PCI=m -CONFIG_BCM43XX=m -CONFIG_BCM43XX_DEBUG=y -CONFIG_BCM43XX_DMA=y -CONFIG_BCM43XX_PIO=y -CONFIG_BCM43XX_DMA_AND_PIO_MODE=y -# CONFIG_BCM43XX_DMA_MODE is not set -# CONFIG_BCM43XX_PIO_MODE is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_RT2X00 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -1070,7 +1166,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -1099,10 +1194,13 @@ CONFIG_SERIO_SERPORT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -1124,79 +1222,118 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -1235,25 +1372,15 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set CONFIG_UIO=m CONFIG_UIO_CIF=m +# CONFIG_UIO_PDRV is not set +# CONFIG_UIO_PDRV_GENIRQ is not set +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1265,9 +1392,8 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set @@ -1281,22 +1407,22 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y -CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=m -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m @@ -1326,11 +1452,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1347,46 +1473,48 @@ CONFIG_EFS_FS=m CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set CONFIG_JFFS2_FS_XATTR=y CONFIG_JFFS2_FS_POSIX_ACL=y CONFIG_JFFS2_FS_SECURITY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y CONFIG_JFFS2_RUBIN=y # CONFIG_JFFS2_CMODE_NONE is not set CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_UBIFS_FS is not set CONFIG_CRAMFS=m CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1400,10 +1528,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1444,29 +1568,30 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -1474,51 +1599,103 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ABLKCIPHER=m -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines @@ -1526,7 +1703,8 @@ CONFIG_CRYPTO_HW=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -- cgit v1.2.3 From 566a3b95579c123f7711e2f98d078f370746046b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 1 Dec 2008 08:16:08 +0000 Subject: MIPS: Malta: Consolidate platform device code. After adding the RTC platform device to malta-platform.c malta-mtd.c should get unified with the rest of the platform device code. --- arch/mips/mti-malta/Makefile | 5 ++- arch/mips/mti-malta/malta-mtd.c | 63 ------------------------------------ arch/mips/mti-malta/malta-platform.c | 51 +++++++++++++++++++++++++++-- 3 files changed, 50 insertions(+), 69 deletions(-) delete mode 100644 arch/mips/mti-malta/malta-mtd.c diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index cef2db8d2225..32e847808df1 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -7,9 +7,8 @@ # obj-y := malta-amon.o malta-cmdline.o \ malta-display.o malta-init.o malta-int.o \ - malta-memory.o malta-mtd.o \ - malta-platform.o malta-reset.o \ - malta-setup.o malta-time.o + malta-memory.o malta-platform.o \ + malta-reset.o malta-setup.o malta-time.o obj-$(CONFIG_EARLY_PRINTK) += malta-console.o obj-$(CONFIG_PCI) += malta-pci.o diff --git a/arch/mips/mti-malta/malta-mtd.c b/arch/mips/mti-malta/malta-mtd.c deleted file mode 100644 index 8ad9bdf25dce..000000000000 --- a/arch/mips/mti-malta/malta-mtd.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 MIPS Technologies, Inc. - * written by Ralf Baechle - */ - -#include -#include -#include -#include -#include - -static struct mtd_partition malta_mtd_partitions[] = { - { - .name = "YAMON", - .offset = 0x0, - .size = 0x100000, - .mask_flags = MTD_WRITEABLE - }, { - .name = "User FS", - .offset = 0x100000, - .size = 0x2e0000 - }, { - .name = "Board Config", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE - } -}; - -static struct physmap_flash_data malta_flash_data = { - .width = 4, - .nr_parts = ARRAY_SIZE(malta_mtd_partitions), - .parts = malta_mtd_partitions -}; - -static struct resource malta_flash_resource = { - .start = 0x1e000000, - .end = 0x1e3fffff, - .flags = IORESOURCE_MEM -}; - -static struct platform_device malta_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &malta_flash_data, - }, - .num_resources = 1, - .resource = &malta_flash_resource, -}; - -static int __init malta_mtd_init(void) -{ - platform_device_register(&malta_flash); - - return 0; -} - -module_init(malta_mtd_init) diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c index 6a476f7733b3..72e32a7715be 100644 --- a/arch/mips/mti-malta/malta-platform.c +++ b/arch/mips/mti-malta/malta-platform.c @@ -3,8 +3,9 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2007 MIPS Technologies, Inc. + * Copyright (C) 2006, 07 MIPS Technologies, Inc. * written by Ralf Baechle (ralf@linux-mips.org) + * written by Ralf Baechle * * Copyright (C) 2008 Wind River Systems, Inc. * updated by Tiejun Chen @@ -20,11 +21,14 @@ * * 2. Register RTC-CMOS platform device on Malta. */ -#include #include #include #include +#include +#include +#include #include +#include #define SMC_PORT(base, int) \ { \ @@ -54,7 +58,7 @@ static struct plat_serial8250_port uart8250_data[] = { static struct platform_device malta_uart8250_device = { .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = uart8250_data, }, @@ -79,9 +83,50 @@ static struct platform_device malta_rtc_device = { .num_resources = ARRAY_SIZE(malta_rtc_resources), }; +static struct mtd_partition malta_mtd_partitions[] = { + { + .name = "YAMON", + .offset = 0x0, + .size = 0x100000, + .mask_flags = MTD_WRITEABLE + }, { + .name = "User FS", + .offset = 0x100000, + .size = 0x2e0000 + }, { + .name = "Board Config", + .offset = 0x3e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE + } +}; + +static struct physmap_flash_data malta_flash_data = { + .width = 4, + .nr_parts = ARRAY_SIZE(malta_mtd_partitions), + .parts = malta_mtd_partitions +}; + +static struct resource malta_flash_resource = { + .start = 0x1e000000, + .end = 0x1e3fffff, + .flags = IORESOURCE_MEM +}; + +static struct platform_device malta_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &malta_flash_data, + }, + .num_resources = 1, + .resource = &malta_flash_resource, +}; + static struct platform_device *malta_devices[] __initdata = { &malta_uart8250_device, &malta_rtc_device, + &malta_flash_device, }; static int __init malta_add_devices(void) -- cgit v1.2.3 From 08d30879a6d3ce399f48def7c494853b5b5f2062 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 3 Dec 2008 16:33:17 +0000 Subject: MIPS: o32: Fix number of arguments to splice(2). The syscall code was assuming splice only takes 4 arguments so no stack arguments were being copied from the userspace stack to the kernel stack. As the result splice was likely to fail with EINVAL. Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall32-o32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 34a4dbd76f24..d0916a55cd77 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -624,7 +624,7 @@ einval: li v0, -ENOSYS sys sys_pselect6 6 sys sys_ppoll 5 sys sys_unshare 1 - sys sys_splice 4 + sys sys_splice 6 sys sys_sync_file_range 7 /* 4305 */ sys sys_tee 4 sys sys_vmsplice 4 -- cgit v1.2.3 From 8d13cb26cd3bf23946743a5b4af2fecd88fc4974 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 3 Dec 2008 17:03:27 +0000 Subject: MIPS: 64-bit: vmsplice needs to use the compat wrapper for o32 and N32. Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/scall64-o32.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index e266b3aa6560..30f3b6317a83 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -390,7 +390,7 @@ EXPORT(sysn32_call_table) PTR sys_splice PTR sys_sync_file_range PTR sys_tee - PTR sys_vmsplice /* 6270 */ + PTR compat_sys_vmsplice /* 6270 */ PTR sys_move_pages PTR compat_sys_set_robust_list PTR compat_sys_get_robust_list diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index facb41a76d1b..3d55e3bbdfc3 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -510,7 +510,7 @@ sys_call_table: PTR sys_splice PTR sys32_sync_file_range /* 4305 */ PTR sys_tee - PTR sys_vmsplice + PTR compat_sys_vmsplice PTR compat_sys_move_pages PTR compat_sys_set_robust_list PTR compat_sys_get_robust_list /* 4310 */ -- cgit v1.2.3 From c6cb4df96fa22d1174d6fb6dfc2c7501d7afaeea Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 31 Oct 2008 11:23:09 -0700 Subject: MIPS: Return ENOSYS from sys32_syscall on 64bit kernels like elsewhere. When the o32 errno was changed to ENOSYS, we forgot to update the code for 64bit kernels. Signed-off-by: David Daney Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall64-o32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 3d55e3bbdfc3..fefef4af8595 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -196,7 +196,7 @@ LEAF(sys32_syscall) jr t2 /* Unreached */ -einval: li v0, -EINVAL +einval: li v0, -ENOSYS jr ra END(sys32_syscall) -- cgit v1.2.3 From 17b24b3c97498935a2ef9777370b1151dfed3f6f Mon Sep 17 00:00:00 2001 From: Chas Williams Date: Thu, 4 Dec 2008 14:58:13 -0800 Subject: ATM: CVE-2008-5079: duplicate listen() on socket corrupts the vcc table As reported by Hugo Dias that it is possible to cause a local denial of service attack by calling the svc_listen function twice on the same socket and reading /proc/net/atm/*vc Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- net/atm/svc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/atm/svc.c b/net/atm/svc.c index de1e4f2f3a43..8fb54dc870b3 100644 --- a/net/atm/svc.c +++ b/net/atm/svc.c @@ -293,7 +293,10 @@ static int svc_listen(struct socket *sock,int backlog) error = -EINVAL; goto out; } - vcc_insert_socket(sk); + if (test_bit(ATM_VF_LISTEN, &vcc->flags)) { + error = -EADDRINUSE; + goto out; + } set_bit(ATM_VF_WAITING, &vcc->flags); prepare_to_wait(sk->sk_sleep, &wait, TASK_UNINTERRUPTIBLE); sigd_enq(vcc,as_listen,NULL,NULL,&vcc->local); @@ -307,6 +310,7 @@ static int svc_listen(struct socket *sock,int backlog) goto out; } set_bit(ATM_VF_LISTEN,&vcc->flags); + vcc_insert_socket(sk); sk->sk_max_ack_backlog = backlog > 0 ? backlog : ATM_BACKLOG_DEFAULT; error = -sk->sk_err; out: -- cgit v1.2.3 From f706644d55f90e8306d87060168fef33804d6dd9 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 4 Dec 2008 15:01:08 -0800 Subject: can: omit received RTR frames for single ID filter lists Since commit d253eee20195b25e298bf162a6e72f14bf4803e5 the single CAN identifier filter lists handle only non-RTR CAN frames. So we need to omit the check of these filter lists when receiving RTR CAN frames. Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- net/can/af_can.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/can/af_can.c b/net/can/af_can.c index d8173e50cb87..3dadb338addd 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -622,7 +622,10 @@ static int can_rcv_filter(struct dev_rcv_lists *d, struct sk_buff *skb) } } - /* check CAN_ID specific entries */ + /* check filterlists for single non-RTR can_ids */ + if (can_id & CAN_RTR_FLAG) + return matches; + if (can_id & CAN_EFF_FLAG) { hlist_for_each_entry_rcu(r, n, &d->rx[RX_EFF], list) { if (r->can_id == can_id) { -- cgit v1.2.3 From b2c2717bae3ad62f18a51ea10188176134bac79c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 4 Dec 2008 20:52:31 +0300 Subject: powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigs This is needed so that Vitesse 7385 5-port switch could work on MPC8349E-mITX boards. Signed-off-by: Anton Vorontsov Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 2 +- arch/powerpc/configs/mpc83xx_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index e55ff7c47a36..07a674f5344e 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -723,7 +723,7 @@ CONFIG_CICADA_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 15eb30c9b3f9..d582014b0a38 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -682,7 +682,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=y # CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -- cgit v1.2.3 From a6af2d6ba5797c556fba0cd3a19e5f3bc9a99b76 Mon Sep 17 00:00:00 2001 From: Doug Leith Date: Thu, 4 Dec 2008 17:17:18 -0800 Subject: tcp: tcp_vegas ssthresh bug fix This patch fixes a bug in tcp_vegas.c. At the moment this code leaves ssthresh untouched. However, this means that the vegas congestion control algorithm is effectively unable to reduce cwnd below the ssthresh value (if the vegas update lowers the cwnd below ssthresh, then slow start is activated to raise it back up). One example where this matters is when during slow start cwnd overshoots the link capacity and a flow then exits slow start with ssthresh set to a value above where congestion avoidance would like to adjust it. Signed-off-by: Doug Leith Signed-off-by: David S. Miller --- net/ipv4/tcp_vegas.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c index 14504dada116..7cd22262de3a 100644 --- a/net/ipv4/tcp_vegas.c +++ b/net/ipv4/tcp_vegas.c @@ -326,6 +326,8 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) tp->snd_cwnd = 2; else if (tp->snd_cwnd > tp->snd_cwnd_clamp) tp->snd_cwnd = tp->snd_cwnd_clamp; + + tp->snd_ssthresh = tcp_current_ssthresh(sk); } /* Wipe the slate clean for the next RTT. */ -- cgit v1.2.3 From 576a488a27f267af203f3ea69c700a1612335e9f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 4 Dec 2008 09:09:34 +1100 Subject: [XFS] Fix hang after disallowed rename across directory quota domains When project quota is active and is being used for directory tree quota control, we disallow rename outside the current directory tree. This requires a check to be made after all the inodes involved in the rename are locked. We fail to unlock the inodes correctly if we disallow the rename when the target is outside the current directory tree. This results in a hang on the next access to the inodes involved in failed rename. Reported-by: Arkadiusz Miskiewicz Signed-off-by: Dave Chinner Tested-by: Arkadiusz Miskiewicz Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_rename.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c index d700dacdb10e..c903130be7fd 100644 --- a/fs/xfs/xfs_rename.c +++ b/fs/xfs/xfs_rename.c @@ -212,7 +212,7 @@ xfs_rename( if (unlikely((target_dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) && (target_dp->i_d.di_projid != src_ip->i_d.di_projid))) { error = XFS_ERROR(EXDEV); - xfs_rename_unlock4(inodes, XFS_ILOCK_SHARED); + xfs_rename_unlock4(inodes, XFS_ILOCK_EXCL); xfs_trans_cancel(tp, cancel_flags); goto std_return; } -- cgit v1.2.3 From aaad077638be1a25871bcae5e43952d6b63abfca Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 5 Dec 2008 01:07:51 +0100 Subject: ACPI: Fix ACPI battery regression introduced by commit 558073 Commit 558073dd56707864f09d563b64e7c37c021e89d2 ("ACPI: battery: Convert discharge energy rate to current properly") caused the battery subsystem to report wrong values of the remaining time on battery power and the time until fully charged on Toshiba Portege R500 (and presumably on other boxes too). Fix the issue by correcting the conversion from mW to mA. Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/acpi/battery.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index a0a178dd189c..4fb3c12ac1d8 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -173,14 +173,17 @@ static int acpi_battery_get_property(struct power_supply *psy, val->intval = battery->voltage_now * 1000; break; case POWER_SUPPLY_PROP_CURRENT_NOW: - val->intval = battery->current_now * 1000; - /* if power units are mW, convert to mA by - dividing by current voltage (mV/1000) */ - if (!battery->power_unit) { - if (battery->voltage_now) { + val->intval = battery->current_now; + if (battery->power_unit) { + val->intval *= 1000; + } else { + /* + * If power units are mW, convert to mA by dividing by + * current voltage. + */ + if (battery->voltage_now) val->intval /= battery->voltage_now; - val->intval *= 1000; - } else + else val->intval = -1; } break; -- cgit v1.2.3 From 40a9a8299116297429298e8fcee08235134883f7 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Tue, 25 Nov 2008 23:29:03 +0200 Subject: iwlwifi: clean key table in iwl_clear_stations_table function This patch cleans uCode key table bit map iwl_clear_stations_table since all stations are cleared also the key table must be. Since the keys are not removed properly on suspend by mac80211 this may result in exhausting key table on resume leading to memory corruption during removal This patch also fixes a memory corruption problem reported in http://marc.info/?l=linux-wireless&m=122641417231586&w=2 and tracked in http://bugzilla.kernel.org/show_bug.cgi?id=12040. When the key is removed a second time the offset is set to 255 - this index is not valid for the ucode_key_table and corrupts the eeprom pointer (which is 255 bits from ucode_key_table). Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Reported-by: Carlos R. Mafra Reported-by: Lukas Hejtmanek Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 3 +++ drivers/net/wireless/iwlwifi/iwl-sta.c | 24 +++++++++++++++++++++--- 2 files changed, 24 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 4c312c55f90c..01a845851338 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -290,6 +290,9 @@ void iwl_clear_stations_table(struct iwl_priv *priv) priv->num_stations = 0; memset(priv->stations, 0, sizeof(priv->stations)); + /* clean ucode key table bit map */ + priv->ucode_key_table = 0; + spin_unlock_irqrestore(&priv->sta_lock, flags); } EXPORT_SYMBOL(iwl_clear_stations_table); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 61797f3f8d5c..26f7084d3011 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -475,7 +475,7 @@ static int iwl_get_free_ucode_key_index(struct iwl_priv *priv) if (!test_and_set_bit(i, &priv->ucode_key_table)) return i; - return -1; + return WEP_INVALID_OFFSET; } int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty) @@ -620,6 +620,9 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; @@ -637,6 +640,7 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, { unsigned long flags; __le16 key_flags = 0; + int ret; key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); @@ -664,14 +668,18 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + spin_unlock_irqrestore(&priv->sta_lock, flags); - IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n"); - return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + return ret; } static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, @@ -696,6 +704,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -734,6 +745,13 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, return 0; } + if (priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) { + IWL_WARNING("Removing wrong key %d 0x%x\n", + keyconf->keyidx, key_flags); + spin_unlock_irqrestore(&priv->sta_lock, flags); + return 0; + } + if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, &priv->ucode_key_table)) IWL_ERROR("index %d not used in uCode key table.\n", -- cgit v1.2.3 From b8ddafd759e356c839774a8b87011b768deb53b3 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 27 Nov 2008 13:42:20 +0800 Subject: ipw2200: fix netif_*_queue() removal regression In "ipw2200: Call netif_*_queue() interfaces properly", netif_stop_queue() and netif_wake_queue() were removed with the reason "netif_carrier_{on,off}() handles starting and stopping packet flow into the driver". The patch also removes a valid condition check that ipw_tx_skb() cannot be called if device is not in STATUS_ASSOCIATED state. But netif_carrier_off() doesn't guarantee netdev->hard_start_xmit won't be called because linkwatch event is handled in a delayed workqueue. This caused a kernel oops reported by Frank Seidel: https://bugzilla.novell.com/show_bug.cgi?id=397390 This patch fixes the problem by moving the STATUS_ASSOCIATED check back to ipw_tx_skb(). It also adds a missing netif_carrier_off() call to ipw_disassociate(). Signed-off-by: Zhu Yi Signed-off-by: Chatre, Reinette Tested-by: Frank Seidel Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2200.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index dcce3542d5a7..7a9f901d4ff6 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -3897,6 +3897,7 @@ static int ipw_disassociate(void *data) if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) return 0; ipw_send_disassociate(data, 0); + netif_carrier_off(priv->net_dev); return 1; } @@ -10190,6 +10191,9 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb, u16 remaining_bytes; int fc; + if (!(priv->status & STATUS_ASSOCIATED)) + goto drop; + hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); switch (priv->ieee->iw_mode) { case IW_MODE_ADHOC: -- cgit v1.2.3 From 5cf12e8dc641ef028f0cf9c317a9567e6b794de1 Mon Sep 17 00:00:00 2001 From: Shaddy Baddah Date: Fri, 28 Nov 2008 17:08:10 +1100 Subject: mac80211: use unaligned safe memcmp() in-place of compare_ether_addr() After fixing zd1211rw: use unaligned safe memcmp() in-place of compare_ether_addr(), I started to see kernel log messages detailing unaligned access: Kernel unaligned access at TPC[100f7f44] sta_info_get+0x24/0x68 [mac80211] As with the aforementioned patch, the unaligned access was eminating from a compare_ether_addr() call. Concerned that whilst it was safe to assume that unalignment was the norm for the zd1211rw, and take preventative measures, it may not be the case or acceptable to use the easy fix of changing the call to memcmp(). My research however indicated that it was OK to do this, as there are a few instances where memcmp() is the preferred mechanism for doing mac address comparisons throughout the module. Signed-off-by: Shaddy Baddah Signed-off-by: John W. Linville --- net/mac80211/sta_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 7fef8ea1f5ec..d254446b85b5 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -99,7 +99,7 @@ struct sta_info *sta_info_get(struct ieee80211_local *local, const u8 *addr) sta = rcu_dereference(local->sta_hash[STA_HASH(addr)]); while (sta) { - if (compare_ether_addr(sta->sta.addr, addr) == 0) + if (memcmp(sta->sta.addr, addr, ETH_ALEN) == 0) break; sta = rcu_dereference(sta->hnext); } -- cgit v1.2.3 From cde6901b7b69557a6f90f3183f76eda581af015e Mon Sep 17 00:00:00 2001 From: Shaddy Baddah Date: Fri, 28 Nov 2008 17:10:45 +1100 Subject: zd1211rw: use unaligned safe memcmp() in-place of compare_ether_addr() Under my 2.6.28-rc6 sparc64, when associating to an AP through my zd1211rw device, I was seeing kernel log messages like (not exact output): Kernel unaligned access at TPC[10129b68] zd_mac_rx+0x144/0x32c [zd1211rw] For the zd1211rw module, on RX, the 80211 packet will be located after the PLCP header in the skb data buffer. The PLCP header being 5 bytes long, the 80211 header will start unaligned from an aligned skb buffer. As per Documentation/unaligned-memory-access.txt, we must replace the not unaligned() safe compare_ether_addr() with memcmp() to protect architectures that require alignment. Signed-off-by: Shaddy Baddah Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fe1867b25ff7..cac732f4047f 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -615,7 +615,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, struct ieee80211_hdr *tx_hdr; tx_hdr = (struct ieee80211_hdr *)skb->data; - if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) + if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN))) { __skb_unlink(skb, q); tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); -- cgit v1.2.3 From 8ebcfc8bcb55261cf01fc302d707fbba46242bf1 Mon Sep 17 00:00:00 2001 From: Nick Andrew Date: Fri, 5 Dec 2008 11:36:54 +1100 Subject: MIPS: Fix incorrect use of loose in vpe.c It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew Signed-off-by: Ralf Baechle --- arch/mips/kernel/vpe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 972b2d2b8401..a1b3da6bad5c 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1134,7 +1134,7 @@ static int vpe_release(struct inode *inode, struct file *filp) /* It's good to be able to run the SP and if it chokes have a look at the /dev/rt?. But if we reset the pointer to the shared struct we - loose what has happened. So perhaps if garbage is sent to the vpe + lose what has happened. So perhaps if garbage is sent to the vpe device, use it as a trigger for the reset. Hopefully a nice executable will be along shortly. */ if (ret < 0) -- cgit v1.2.3 From 640d17d60e83401e10e66a0ab6e9e2d6350df656 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 4 Dec 2008 05:39:55 +0000 Subject: powerpc/virtex5: Fix Virtex5 machine check handling The 440x5 core in the Virtex5 uses the 440A type machine check (ie, they have MCSRR0/MCSRR1). They thus need to call the appropriate fixup function to hook the right variant of the exception. Without this, all machine checks become fatal due to loss of context when entering the exception handler. Signed-off-by: Grant Likely Signed-off-by: Josh Boyer --- arch/powerpc/kernel/cpu_setup_44x.S | 1 + arch/powerpc/kernel/cputable.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S index 31c18b52affb..10b4ab1008af 100644 --- a/arch/powerpc/kernel/cpu_setup_44x.S +++ b/arch/powerpc/kernel/cpu_setup_44x.S @@ -40,6 +40,7 @@ _GLOBAL(__setup_cpu_460gt) mtlr r4 blr +_GLOBAL(__setup_cpu_440x5) _GLOBAL(__setup_cpu_440gx) _GLOBAL(__setup_cpu_440spe) b __fixup_440A_mcheck diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index b1eb834bc0fc..7e8719504f39 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -39,6 +39,7 @@ extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_440x5(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec); @@ -1500,6 +1501,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .cpu_setup = __setup_cpu_440x5, + .machine_check = machine_check_440A, .platform = "ppc440", }, { /* 460EX */ -- cgit v1.2.3 From f10a3a32ae2edbe94920ce6827f4c2550eb6ed48 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 5 Dec 2008 13:30:03 -0800 Subject: Revert "ACPI: battery: Convert discharge energy rate to current properly" This reverts commit 558073dd56707864f09d563b64e7c37c021e89d2, along with the failed try to fix the regression it caused ("ACPI: Fix ACPI battery regression introduced by commit 558073"), which just made things worse. Commit aaad077638be1a25871bcae5e43952d6b63abfca (that failed "Fix ACPI battery regression") got the voltage conversion confused, and fixed the problem with Rafael's battery monitor apparently just by mistake. So revert them both, getting us back to the 2.6.27 state in this, and let's revisit it when people understand what's going on. Noted-by: Paul Martin Requested-by: Rafael J. Wysocki Cc: Len Brown Cc: Alexey Starikovskiy Signed-off-by: Linus Torvalds --- drivers/acpi/battery.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 4fb3c12ac1d8..1423b0c0cd2e 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -173,19 +173,7 @@ static int acpi_battery_get_property(struct power_supply *psy, val->intval = battery->voltage_now * 1000; break; case POWER_SUPPLY_PROP_CURRENT_NOW: - val->intval = battery->current_now; - if (battery->power_unit) { - val->intval *= 1000; - } else { - /* - * If power units are mW, convert to mA by dividing by - * current voltage. - */ - if (battery->voltage_now) - val->intval /= battery->voltage_now; - else - val->intval = -1; - } + val->intval = battery->current_now * 1000; break; case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: -- cgit v1.2.3 From c4f0124057bd92d032d2d146034995f15f4297de Mon Sep 17 00:00:00 2001 From: Nick Andrew Date: Fri, 5 Dec 2008 16:34:46 +0000 Subject: Fix incorrect use of loose in tty/serial drivers [Folded together as one diff from 3] It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/serial167.c | 2 +- drivers/serial/mpc52xx_uart.c | 4 ++-- drivers/usb/serial/ftdi_sio.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 3b23270eaa65..a8f15e6be594 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -418,7 +418,7 @@ static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id) TTY_OVERRUN); /* If the flip buffer itself is - overflowing, we still loose + overflowing, we still lose the next incoming character. */ if (tty_buffer_request_room(tty, 1) != diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 6117d3db0b66..28c00c3d58f5 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -591,8 +591,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, /* Update the per-port timeout */ uart_update_timeout(port, new->c_cflag, baud); - /* Do our best to flush TX & RX, so we don't loose anything */ - /* But we don't wait indefinitly ! */ + /* Do our best to flush TX & RX, so we don't lose anything */ + /* But we don't wait indefinitely ! */ j = 5000000; /* Maximum wait */ /* FIXME Can't receive chars since set_termios might be called at early * boot for the console, all stuff is not yet ready to receive at that diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 51d7bdea2869..aad1359a3eb1 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1498,7 +1498,7 @@ static int ftdi_open(struct tty_struct *tty, priv->interface, buf, 0, WDR_TIMEOUT); /* Termios defaults are set by usb_serial_init. We don't change - port->tty->termios - this would loose speed settings, etc. + port->tty->termios - this would lose speed settings, etc. This is same behaviour as serial.c/rs_open() - Kuba */ /* ftdi_set_termios will send usb control messages */ -- cgit v1.2.3 From 5e333309c59da608d4dd3cbaa67a061d817fdce2 Mon Sep 17 00:00:00 2001 From: Nick Andrew Date: Fri, 5 Dec 2008 16:34:56 +0000 Subject: Fix incorrect use of loose in i2o_block.c Fix incorrect use of loose in i2o_block.c It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/message/i2o/i2o_block.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 84bdc2ee69e6..a443e136dc41 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -354,7 +354,7 @@ static inline void i2o_block_sglist_free(struct i2o_block_request *ireq) * @req: the request to prepare * * Allocate the necessary i2o_block_request struct and connect it to - * the request. This is needed that we not loose the SG list later on. + * the request. This is needed that we not lose the SG list later on. * * Returns BLKPREP_OK on success or BLKPREP_DEFER on failure. */ -- cgit v1.2.3 From 2289e6643660601d3b21a22effd04dcca27775e4 Mon Sep 17 00:00:00 2001 From: Qinghuang Feng Date: Fri, 5 Dec 2008 16:35:07 +0000 Subject: drivers/message/i2o/iop.c: cleanup kerneldoc no argument named @msg in i2o_msg_get_wait(), remove it. Signed-off-by: Qinghuang Feng Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/message/i2o/iop.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index be2b5926d26c..6e53a30bfd38 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -49,7 +49,6 @@ static int i2o_hrt_get(struct i2o_controller *c); /** * i2o_msg_get_wait - obtain an I2O message from the IOP * @c: I2O controller - * @msg: pointer to a I2O message pointer * @wait: how long to wait until timeout * * This function waits up to wait seconds for a message slot to be -- cgit v1.2.3 From f2f1fa78a155524b849edf359e42a3001ea652c0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 5 Dec 2008 14:49:18 -0800 Subject: Enforce a minimum SG_IO timeout There's no point in having too short SG_IO timeouts, since if the command does end up timing out, we'll end up through the reset sequence that is several seconds long in order to abort the command that timed out. As a result, shorter timeouts than a few seconds simply do not make sense, as the recovery would be longer than the timeout itself. Add a BLK_MIN_SG_TIMEOUT to match the existign BLK_DEFAULT_SG_TIMEOUT. Suggested-by: Alan Cox Acked-by: Tejun Heo Acked-by: Jens Axboe Cc: Jeff Garzik Signed-off-by: Linus Torvalds --- block/bsg.c | 2 ++ block/scsi_ioctl.c | 2 ++ include/linux/blkdev.h | 1 + 3 files changed, 5 insertions(+) diff --git a/block/bsg.c b/block/bsg.c index e8bd2475682a..e73e50daf3d0 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -202,6 +202,8 @@ static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq, rq->timeout = q->sg_timeout; if (!rq->timeout) rq->timeout = BLK_DEFAULT_SG_TIMEOUT; + if (rq->timeout < BLK_MIN_SG_TIMEOUT) + rq->timeout = BLK_MIN_SG_TIMEOUT; return 0; } diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 5963cf91a3a0..d0bb92cbefb9 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -208,6 +208,8 @@ static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq, rq->timeout = q->sg_timeout; if (!rq->timeout) rq->timeout = BLK_DEFAULT_SG_TIMEOUT; + if (rq->timeout < BLK_MIN_SG_TIMEOUT) + rq->timeout = BLK_MIN_SG_TIMEOUT; return 0; } diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 6dcd30d806cd..031a315c0509 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -662,6 +662,7 @@ extern unsigned long blk_max_low_pfn, blk_max_pfn; * default timeout for SG_IO if none specified */ #define BLK_DEFAULT_SG_TIMEOUT (60 * HZ) +#define BLK_MIN_SG_TIMEOUT (7 * HZ) #ifdef CONFIG_BOUNCE extern int init_emergency_isa_pool(void); -- cgit v1.2.3 From 218d11a8b071b23b76c484fd5f72a4fe3306801e Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Fri, 5 Dec 2008 16:12:48 -0700 Subject: Fix a race condition in FASYNC handling Changeset a238b790d5f99c7832f9b73ac8847025815b85f7 (Call fasync() functions without the BKL) introduced a race which could leave file->f_flags in a state inconsistent with what the underlying driver/filesystem believes. Revert that change, and also fix the same races in ioctl_fioasync() and ioctl_fionbio(). This is a minimal, short-term fix; the real fix will not involve the BKL. Reported-by: Oleg Nesterov Cc: Andi Kleen Cc: Al Viro Cc: stable@kernel.org Signed-off-by: Jonathan Corbet Signed-off-by: Linus Torvalds --- fs/fcntl.c | 7 +++++++ fs/ioctl.c | 12 ++++++++---- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index ac4f7db9f134..549daf8005fb 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -175,6 +176,11 @@ static int setfl(int fd, struct file * filp, unsigned long arg) if (error) return error; + /* + * We still need a lock here for now to keep multiple FASYNC calls + * from racing with each other. + */ + lock_kernel(); if ((arg ^ filp->f_flags) & FASYNC) { if (filp->f_op && filp->f_op->fasync) { error = filp->f_op->fasync(fd, filp, (arg & FASYNC) != 0); @@ -185,6 +191,7 @@ static int setfl(int fd, struct file * filp, unsigned long arg) filp->f_flags = (arg & SETFL_MASK) | (filp->f_flags & ~SETFL_MASK); out: + unlock_kernel(); return error; } diff --git a/fs/ioctl.c b/fs/ioctl.c index d152856c371b..43e8b2c0664b 100644 --- a/fs/ioctl.c +++ b/fs/ioctl.c @@ -400,11 +400,9 @@ static int ioctl_fioasync(unsigned int fd, struct file *filp, /* Did FASYNC state change ? */ if ((flag ^ filp->f_flags) & FASYNC) { - if (filp->f_op && filp->f_op->fasync) { - lock_kernel(); + if (filp->f_op && filp->f_op->fasync) error = filp->f_op->fasync(fd, filp, on); - unlock_kernel(); - } else + else error = -ENOTTY; } if (error) @@ -440,11 +438,17 @@ int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd, break; case FIONBIO: + /* BKL needed to avoid races tweaking f_flags */ + lock_kernel(); error = ioctl_fionbio(filp, argp); + unlock_kernel(); break; case FIOASYNC: + /* BKL needed to avoid races tweaking f_flags */ + lock_kernel(); error = ioctl_fioasync(fd, filp, argp); + unlock_kernel(); break; case FIOQSIZE: -- cgit v1.2.3 From 794baba637999b81aa40e60fae1fa91978e08808 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 5 Dec 2008 03:25:47 +0100 Subject: [ARM] 5340/1: fix stack placement after noexecstack changes Commit 8ec53663d2698076468b3e1edc4e1b418bd54de3 ("[ARM] Improve non-executable support") added support for detecting non-executable stack binaries. One of the things it does is to make READ_IMPLIES_EXEC be set in ->personality if we are running on a CPU that doesn't support the XN ("Execute Never") page table bit or if we are running a binary that needs an executable stack. This exposed a latent bug in ARM's asm/processor.h due to which we'll end up placing the stack at a very low address, where it will bump into the heap on any application that uses significant amount of stack or heap or both, causing many interesting crashes. Fix this by testing the ADDR_LIMIT_32BIT bit in ->personality instead of testing for equality against PER_LINUX_32BIT. Reviewed-by: Nicolas Pitre Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/include/asm/processor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 517a4d6ffc74..6ff33790f47b 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -23,7 +23,7 @@ #include #ifdef __KERNEL__ -#define STACK_TOP ((current->personality == PER_LINUX_32BIT) ? \ +#define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ TASK_SIZE : TASK_SIZE_26) #define STACK_TOP_MAX TASK_SIZE #endif -- cgit v1.2.3 From baa745a3378046ca1c5477495df6ccbec7690428 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 7 Dec 2008 09:44:55 +0000 Subject: [ARM] Fix alignment fault handling for ARMv6 and later CPUs On ARMv6 and later CPUs, it is possible for userspace processes to get stuck on a misaligned load or store due to the "ignore fault" setting; unlike previous CPUs, retrying the instruction without the 'A' bit set does not always cause the load to succeed. We have no real option but to default to fixing up alignment faults on these CPUs, and having the CPU fix up those misaligned accesses which it can. Reported-by: Wolfgang Grandegger Signed-off-by: Russell King --- arch/arm/mm/alignment.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 133e65d166b3..2d5884ce0435 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -70,6 +70,10 @@ static unsigned long ai_dword; static unsigned long ai_multi; static int ai_usermode; +#define UM_WARN (1 << 0) +#define UM_FIXUP (1 << 1) +#define UM_SIGNAL (1 << 2) + #ifdef CONFIG_PROC_FS static const char *usermode_action[] = { "ignored", @@ -754,7 +758,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) user: ai_user += 1; - if (ai_usermode & 1) + if (ai_usermode & UM_WARN) printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx " "Address=0x%08lx FSR 0x%03x\n", current->comm, task_pid_nr(current), instrptr, @@ -762,10 +766,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) thumb_mode(regs) ? tinstr : instr, addr, fsr); - if (ai_usermode & 2) + if (ai_usermode & UM_FIXUP) goto fixup; - if (ai_usermode & 4) + if (ai_usermode & UM_SIGNAL) force_sig(SIGBUS, current); else set_cr(cr_no_alignment); @@ -796,6 +800,22 @@ static int __init alignment_init(void) res->write_proc = proc_alignment_write; #endif + /* + * ARMv6 and later CPUs can perform unaligned accesses for + * most single load and store instructions up to word size. + * LDM, STM, LDRD and STRD still need to be handled. + * + * Ignoring the alignment fault is not an option on these + * CPUs since we spin re-faulting the instruction without + * making any progress. + */ + if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) { + cr_alignment &= ~CR_A; + cr_no_alignment &= ~CR_A; + set_cr(cr_alignment); + ai_usermode = UM_FIXUP; + } + hook_fault_code(1, do_alignment, SIGILL, "alignment exception"); hook_fault_code(3, do_alignment, SIGILL, "alignment exception"); -- cgit v1.2.3 From c49b9f295e513753e6d9bb4444ba502f1aa59b29 Mon Sep 17 00:00:00 2001 From: Balazs Scheidler Date: Sun, 7 Dec 2008 23:53:46 -0800 Subject: tproxy: fixe a possible read from an invalid location in the socket match TIME_WAIT sockets need to be handled specially, and the socket match casted inet_timewait_sock instances to inet_sock, which are not compatible. Handle this special case by checking sk->sk_state. Signed-off-by: Balazs Scheidler Signed-off-by: David S. Miller --- net/netfilter/xt_socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c index 02a8fed21082..1acc089be7e9 100644 --- a/net/netfilter/xt_socket.c +++ b/net/netfilter/xt_socket.c @@ -141,7 +141,7 @@ socket_mt(const struct sk_buff *skb, const struct xt_match_param *par) sk = nf_tproxy_get_sock_v4(dev_net(skb->dev), protocol, saddr, daddr, sport, dport, par->in, false); if (sk != NULL) { - bool wildcard = (inet_sk(sk)->rcv_saddr == 0); + bool wildcard = (sk->sk_state != TCP_TIME_WAIT && inet_sk(sk)->rcv_saddr == 0); nf_tproxy_put_sock(sk); if (wildcard) -- cgit v1.2.3 From bb9d4ff80bc032d7961815c2ff5eaf458ae3adff Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 4 Dec 2008 15:59:48 +0100 Subject: AMD IOMMU: fix iommu_map_page function Impact: bugfix in iommu_map_page function Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 5662e226b0c9..67970a8c2ee9 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -344,7 +344,7 @@ static int iommu_map(struct protection_domain *dom, u64 __pte, *pte, *page; bus_addr = PAGE_ALIGN(bus_addr); - phys_addr = PAGE_ALIGN(bus_addr); + phys_addr = PAGE_ALIGN(phys_addr); /* only support 512GB address spaces for now */ if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK)) -- cgit v1.2.3 From 3cc3d84bffbd93bdb671ac7961b12cd98fbb9266 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 4 Dec 2008 16:44:31 +0100 Subject: AMD IOMMU: fix loop counter in free_pagetable function Impact: bugfix Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 67970a8c2ee9..0637e65ca0c7 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -600,7 +600,7 @@ static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom) continue; p2 = IOMMU_PTE_PAGE(p1[i]); - for (j = 0; j < 512; ++i) { + for (j = 0; j < 512; ++j) { if (!IOMMU_PTE_PRESENT(p2[j])) continue; p3 = IOMMU_PTE_PAGE(p2[j]); -- cgit v1.2.3 From 24f811603e8ef4b9173f47fa263230168e237128 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 8 Dec 2008 14:25:39 +0100 Subject: AMD IOMMU: fix typo in comment Impact: cleanup Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 0637e65ca0c7..2fde073b6be6 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -922,8 +922,8 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu, /* * This function contains common code for mapping of a physically - * contiguous memory region into DMA address space. It is uses by all - * mapping functions provided by this IOMMU driver. + * contiguous memory region into DMA address space. It is used by all + * mapping functions provided with this IOMMU driver. * Must be called with the domain lock held. */ static dma_addr_t __map_single(struct device *dev, -- cgit v1.2.3 From 8ad909c4c1b91bd35ba6a2af5e7ab3fc8d9fe283 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 8 Dec 2008 14:37:20 +0100 Subject: AMD IOMMU: fix WARN_ON in dma_ops unmap path Impact: minor fix Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 2fde073b6be6..3133a0ea09ff 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -910,7 +910,7 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu, if (address >= dom->aperture_size) return; - WARN_ON(address & 0xfffULL || address > dom->aperture_size); + WARN_ON(address & ~PAGE_MASK || address >= dom->aperture_size); pte = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)]; pte += IOMMU_PTE_L0_INDEX(address); -- cgit v1.2.3 From b8d9905d025d80a2357e8ce4704fde2923f6a1bd Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 8 Dec 2008 14:40:26 +0100 Subject: AMD IOMMU: __unmap_single: check for bad_dma_address instead of 0 Impact: minor fix Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 3133a0ea09ff..a7b6dec6fc3f 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -983,7 +983,8 @@ static void __unmap_single(struct amd_iommu *iommu, dma_addr_t i, start; unsigned int pages; - if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size)) + if ((dma_addr == bad_dma_address) || + (dma_addr + size > dma_dom->aperture_size)) return; pages = iommu_num_pages(dma_addr, size, PAGE_SIZE); -- cgit v1.2.3 From 087052b02f42b50316c6e4d7f2d8dfba3de6fc2e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 17 Oct 2008 16:09:57 +0200 Subject: x86: fix default_spin_lock_flags() prototype MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit these warnings: arch/x86/kernel/paravirt-spinlocks.c: In function ‘default_spin_lock_flags’: arch/x86/kernel/paravirt-spinlocks.c:12: warning: passing argument 1 of ‘__raw_spin_lock’ from incompatible pointer type arch/x86/kernel/paravirt-spinlocks.c: At top level: arch/x86/kernel/paravirt-spinlocks.c:11: warning: ‘default_spin_lock_flags’ defined but not used showed that the prototype of default_spin_lock_flags() was confused about what type spinlocks have. the proper type on UP is raw_spinlock_t. Signed-off-by: Ingo Molnar --- arch/x86/kernel/paravirt-spinlocks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c index 0e9f1982b1dd..95777b0faa73 100644 --- a/arch/x86/kernel/paravirt-spinlocks.c +++ b/arch/x86/kernel/paravirt-spinlocks.c @@ -7,7 +7,8 @@ #include -static void default_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags) +static inline void +default_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) { __raw_spin_lock(lock); } -- cgit v1.2.3 From 1a659880ee755d96eeabe64bded059abed6d5ef5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 8 Dec 2008 17:42:35 +0100 Subject: Revert "ide: respect current DMA setting during resume" This reverts commit e9eb8388306364295308132265c00bea685f409f since it could break resume (thanks to Paul Collins for the report). I'll look into sorting this out properly for 2.6.29 but for 2.6.28 it is the best to just revert my patch. Reported-by: Paul Collins Cc: rjw@sisk.pl Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 7d275b2af3eb..cc35d6dbd410 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -208,8 +208,10 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * */ if (drive->hwif->dma_ops == NULL) break; - if (drive->dev_flags & IDE_DFLAG_USING_DMA) - ide_set_dma(drive); + /* + * TODO: respect IDE_DFLAG_USING_DMA + */ + ide_set_dma(drive); break; } -- cgit v1.2.3 From 53846574799884a04a4498f6342400d5c1423c79 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 8 Dec 2008 17:52:05 +0100 Subject: ide: build-fix for CONFIG_BLK_DEV_IDEDMA_PMAC=n IDE pmac host driver build fails with CONFIG_BLK_DEV_IDEDMA_PMAC=n as reported by Kamalesh: > drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode': > drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing' > drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function) > drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once > drivers/ide/pmac.c:527: error: for each function it appears in.) > drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function) > drivers/ide/pmac.c: In function 'pmac_ide_do_resume': > drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function) > drivers/ide/pmac.c: At top level: > drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function) > drivers/ide/pmac.c: In function 'pmac_ide_setup_device': > drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function) > drivers/ide/pmac.c: In function 'pmac_ide_macio_attach': > drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs' > drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs' > make[2]: *** [drivers/ide/pmac.o] Error 1 Fix it by removing the superfluous config option. Reported-and-tested-by: Kamalesh Babulal Cc: Benjamin Herrenschmidt Cc: Sergei Shtylyov Cc: Stephen Rothwell Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 14 +++----------- drivers/ide/pmac.c | 30 +++--------------------------- 2 files changed, 6 insertions(+), 38 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 6d7401772a8f..e6857e01d1ba 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -669,10 +669,12 @@ config BLK_DEV_CELLEB endif +# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" depends on PPC_PMAC && IDE=y select IDE_TIMINGS + select BLK_DEV_IDEDMA_PCI help This driver provides support for the on-board IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. @@ -689,16 +691,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST CD-ROM on hda. This option changes this to more natural hda for hard disk and hdc for CD-ROM. -config BLK_DEV_IDEDMA_PMAC - bool "PowerMac IDE DMA support" - depends on BLK_DEV_IDE_PMAC - select BLK_DEV_IDEDMA_PCI - help - This option allows the driver for the on-board IDE controller on - Power Macintoshes and PowerBooks to use DMA (direct memory access) - to transfer data to and from memory. Saying Y is safe and improves - performance. - config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 @@ -912,7 +904,7 @@ config BLK_DEV_UMC8672 endif config BLK_DEV_IDEDMA - def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \ + def_bool BLK_DEV_IDEDMA_SFF || \ BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA endif # IDE diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 2e19d6298536..7c481bb56fab 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif { struct macio_dev *mdev; u32 timings[4]; volatile u32 __iomem * *kauai_fcr; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC /* Those fields are duplicating what is in hwif. We currently * can't use the hwif ones because of some assumptions that are * beeing done by the generic code about the kind of dma controller @@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif { */ volatile struct dbdma_regs __iomem * dma_regs; struct dbdma_cmd* dma_table_cpu; -#endif - } pmac_ide_hwif_t; enum { @@ -222,8 +219,6 @@ static const char* model_name[] = { #define KAUAI_FCR_UATA_RESET_N 0x00000002 #define KAUAI_FCR_UATA_ENABLE 0x00000001 -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* Rounded Multiword DMA timings * * I gave up finding a generic formula for all controller @@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); static void pmac_ide_selectproc(ide_drive_t *drive); static void pmac_ide_kauai_selectproc(ide_drive_t *drive); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - #define PMAC_IDE_REG(x) \ ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) @@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) pmac_ide_do_update_timings(drive); } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* * Calculate KeyLargo ATA/66 UDMA timings */ @@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, drive->name, speed & 0xf, *timings); #endif } -#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) { @@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) tl[0] = *timings; tl[1] = *timings2; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC if (speed >= XFER_UDMA_0) { if (pmif->kind == controller_kl_ata4) ret = set_timings_udma_ata4(&tl[0], speed); @@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) ret = -1; } else set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + if (ret) return; @@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_port_info = { .chipset = ide_pmac, .tp_ops = &pmac_tp_ops, .port_ops = &pmac_ide_port_ops, -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC .dma_ops = &pmac_dma_ops, -#endif .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_MMIO | @@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) pmif->regbase = regbase; pmif->irq = irq; pmif->kauai_fcr = NULL; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + if (macio_resource_count(mdev) >= 2) { if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) printk(KERN_WARNING "ide-pmac: can't request DMA " @@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); } else pmif->dma_regs = NULL; -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + dev_set_drvdata(&mdev->ofdev.dev, pmif); memset(&hw, 0, sizeof(hw)); @@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) base = ioremap(rbase, rlen); pmif->regbase = (unsigned long) base + 0x2000; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC pmif->dma_regs = base + 0x1000; -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ pmif->kauai_fcr = base; pmif->irq = pdev->irq; @@ -1434,8 +1419,6 @@ out: return error; } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* * pmac_ide_build_dmatable builds the DBDMA command list * for a transfer and sets the DBDMA channel to point to it. @@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, return 0; } -#else -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) -{ - return -EOPNOTSUPP; -} -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ module_init(pmac_ide_probe); -- cgit v1.2.3 From a4f4d6df537368297a84e6b9444f403f99bf59f6 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 8 Dec 2008 18:24:18 -0500 Subject: EXPORTFS: handle NULL returns from fh_to_dentry()/fh_to_parent() While 440037287c5 "[PATCH] switch all filesystems over to d_obtain_alias" removed some cases where fh_to_dentry() and fh_to_parent() could return NULL, there are still a few NULL returns left in individual filesystems. Thus it was a mistake for that commit to remove the handling of NULL returns in the callers. Revert those parts of 440037287c5 which removed the NULL handling. (We could, alternatively, modify all implementations to return -ESTALE instead of NULL, but that proves to require fixing a number of filesystems, and in some cases it's arguably more natural to return NULL.) Thanks to David for original patch and Linus, Christoph, and Hugh for review. Signed-off-by: J. Bruce Fields Cc: David Howells Cc: Christoph Hellwig Cc: Hugh Dickins Signed-off-by: Linus Torvalds --- fs/exportfs/expfs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c index 80246bad1b7f..890e01828817 100644 --- a/fs/exportfs/expfs.c +++ b/fs/exportfs/expfs.c @@ -367,6 +367,8 @@ struct dentry *exportfs_decode_fh(struct vfsmount *mnt, struct fid *fid, * Try to get any dentry for the given file handle from the filesystem. */ result = nop->fh_to_dentry(mnt->mnt_sb, fid, fh_len, fileid_type); + if (!result) + result = ERR_PTR(-ESTALE); if (IS_ERR(result)) return result; @@ -420,6 +422,8 @@ struct dentry *exportfs_decode_fh(struct vfsmount *mnt, struct fid *fid, target_dir = nop->fh_to_parent(mnt->mnt_sb, fid, fh_len, fileid_type); + if (!target_dir) + goto err_result; err = PTR_ERR(target_dir); if (IS_ERR(target_dir)) goto err_result; -- cgit v1.2.3 From fae7043c65d65f3e5b34bac4431c6ccc49190c41 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 9 Dec 2008 15:30:50 +1000 Subject: drm/radeon: don't actually enable the IRQ regs until irq is enabled vblank can try and enable the IRQ registers before we've set the interrupt handler up. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_drv.h | 1 - drivers/gpu/drm/radeon/radeon_irq.c | 8 ++++---- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 7a183789be97..3bbb871b25d5 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -299,7 +299,6 @@ typedef struct drm_radeon_private { atomic_t swi_emitted; int vblank_crtc; uint32_t irq_enable_reg; - int irq_enabled; uint32_t r500_disp_irq_reg; struct radeon_surface surfaces[RADEON_MAX_SURFACES]; diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index 97c0599fdb1e..99be11418ac2 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -44,7 +44,8 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->irq_enable_reg &= ~mask; - RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); + if (!dev->irq_enabled) + RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); } static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) @@ -56,7 +57,8 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->r500_disp_irq_reg &= ~mask; - RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); + if (!dev->irq_enabled) + RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); } int radeon_enable_vblank(struct drm_device *dev, int crtc) @@ -355,8 +357,6 @@ void radeon_driver_irq_uninstall(struct drm_device * dev) if (!dev_priv) return; - dev_priv->irq_enabled = 0; - if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) RADEON_WRITE(R500_DxMODE_INT_MASK, 0); /* Disable *all* interrupts */ -- cgit v1.2.3 From 15c35334c9b7a11f66ddf7fea9367884e1f5414f Mon Sep 17 00:00:00 2001 From: Owain Ainsworth Date: Sat, 6 Dec 2008 20:42:20 -0800 Subject: drm/i915: Don't return error in evict_everything when we get to the end. Returning -ENOMEM errored all the way out of execbuf, so the rendering never occurred. Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 3fde82be014f..ad672d854828 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1104,6 +1104,8 @@ i915_gem_evict_everything(struct drm_device *dev) if (ret != 0) break; } + if (ret == -ENOMEM) + return 0; return ret; } -- cgit v1.2.3 From b60678a75d44fa9d5969f79781bd856ad5858609 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 8 Dec 2008 11:12:28 -0800 Subject: drm/i915: Disable the GM965 MSI errata workaround. Since applying the fix suggested by the errata (disabling MSI), we've had issues with interrupts being stuck on despite IIR being 0 on GM965 hardware. Most reporters of the issue have confirmed that turning MSI back on fixes things, and given the difficulties experienced in getting reliable MSI working on Linux, it's believable that the errata was about software issues and not actual hardware issues. Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index ba89b42f790a..553dd4bc3075 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -847,9 +847,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) * and the registers being closely associated. * * According to chipset errata, on the 965GM, MSI interrupts may - * be lost or delayed + * be lost or delayed, but we use them anyways to avoid + * stuck interrupts on some machines. */ - if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev)) + if (!IS_I945G(dev) && !IS_I945GM(dev)) pci_enable_msi(dev->pdev); intel_opregion_init(dev); -- cgit v1.2.3 From 2456eb819be7aa2cac73359c2855dfa30e46d75a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 8 Dec 2008 18:48:42 +0900 Subject: pata_hpt366: fix clock detection pata_hpt366 had its clock detection wrong and detected 25Mhz as 40Mhz and vice-versa. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt366.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index f2b83eabc7c7..a098ba8eaab6 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -382,10 +382,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* PCI clocking determines the ATA timing values to use */ /* info_hpt366 is safe against re-entry so we can scribble on it */ switch((reg1 & 0x700) >> 8) { - case 5: + case 9: hpriv = &hpt366_40; break; - case 9: + case 5: hpriv = &hpt366_25; break; default: -- cgit v1.2.3 From 9ac6212660fa3d8d0d21e782a22b956a6bc78a43 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 3 Dec 2008 09:13:46 +0100 Subject: ATA: piix, fix pointer deref on suspend Hi, I've found this issue in the mmotm 2008-12-02-17-08. -- Commit ata_piix: add borked Tecra M4 to broken suspend list introduced DMI variables checking, but they can be null, so that we possibly dereference null. Check if they are null and avoid checks in that case. Solves: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 IP: [] piix_pci_device_suspend+0x117/0x230 Signed-off-by: Jiri Slaby Cc: Jeff Garzik Cc: Alexandru Romanescu Cc: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d6d97d8f3fa4..c11936e13dd3 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1072,7 +1072,14 @@ static int piix_broken_suspend(void) * matching is necessary because dmi_system_id.matches is * limited to four entries. */ - if (!strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && + if (dmi_get_system_info(DMI_SYS_VENDOR) && + dmi_get_system_info(DMI_PRODUCT_NAME) && + dmi_get_system_info(DMI_PRODUCT_VERSION) && + dmi_get_system_info(DMI_PRODUCT_SERIAL) && + dmi_get_system_info(DMI_BOARD_VENDOR) && + dmi_get_system_info(DMI_BOARD_NAME) && + dmi_get_system_info(DMI_BOARD_VERSION) && + !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") && !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") && !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") && -- cgit v1.2.3 From e33ba2c6c668a2be8f192b383186ee7cbb371da0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 5 Dec 2008 19:41:52 +0000 Subject: pata_sis: Remove bogus cable match Some systems report SIS 5513 as both vendor/id and subvendor/id string. In that case we can't distinguish the system by the id svid/sdid and in fact the entry here breaks some boxes. At some point we need to find another way to detect the Targa Visionary 1000, until then this trades a hang for some users with lower performance for others. Closes: #12092 Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_sis.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index d34236611752..e4be55e047f6 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -56,7 +56,6 @@ static const struct sis_laptop sis_laptop[] = { { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ - { 0x5513, 0x1039, 0x5513 }, /* Targa Visionary 1000 */ /* end marker */ { 0, } }; -- cgit v1.2.3 From b604958a98f108dc6a44c32cc8062659bd5fd324 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 5 Dec 2008 19:42:38 +0000 Subject: pata_ninja32: update ID table Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_ninja32.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 4e466eae8b46..4dd9a3b031e4 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -44,7 +44,7 @@ #include #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.1.1" +#define DRV_VERSION "0.1.3" /** @@ -130,7 +130,8 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) return rc; pci_set_master(dev); - /* Set up the register mappings */ + /* Set up the register mappings. We use the I/O mapping as only the + older chips also have MMIO on BAR 1 */ base = host->iomap[0]; if (!base) return -ENOMEM; @@ -167,8 +168,12 @@ static int ninja32_reinit_one(struct pci_dev *pdev) #endif static const struct pci_device_id ninja32[] = { + { 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { }, }; -- cgit v1.2.3 From e3389cbc65ecc486d4aea2f0e9114abc0f849be2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 5 Dec 2008 19:43:03 +0000 Subject: ata: Fix experimental tags Various tags are now way out of date Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 78fbec8ceda0..421b7c71e72d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -153,7 +153,7 @@ config SATA_PROMISE If unsure, say N. config SATA_SX4 - tristate "Promise SATA SX4 support" + tristate "Promise SATA SX4 support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for Promise Serial ATA SX4. @@ -219,8 +219,8 @@ config PATA_ACPI otherwise unsupported hardware. config PATA_ALI - tristate "ALi PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "ALi PATA support" + depends on PCI help This option enables support for the ALi ATA interfaces found on the many ALi chipsets. @@ -263,7 +263,7 @@ config PATA_ATIIXP If unsure, say N. config PATA_CMD640_PCI - tristate "CMD640 PCI PATA support (Very Experimental)" + tristate "CMD640 PCI PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the CMD640 PCI IDE @@ -291,8 +291,8 @@ config PATA_CS5520 If unsure, say N. config PATA_CS5530 - tristate "CS5530 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "CS5530 PATA support" + depends on PCI help This option enables support for the Cyrix/NatSemi/AMD CS5530 companion chip used with the MediaGX/Geode processor family. @@ -309,8 +309,8 @@ config PATA_CS5535 If unsure, say N. config PATA_CS5536 - tristate "CS5536 PATA support (Experimental)" - depends on PCI && X86 && !X86_64 && EXPERIMENTAL + tristate "CS5536 PATA support" + depends on PCI && X86 && !X86_64 help This option enables support for the AMD CS5536 companion chip used with the Geode LX processor family. @@ -363,7 +363,7 @@ config PATA_HPT37X If unsure, say N. config PATA_HPT3X2N - tristate "HPT 372N/302N PATA support (Very Experimental)" + tristate "HPT 372N/302N PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the N variant HPT PATA @@ -389,8 +389,8 @@ config PATA_HPT3X3_DMA problems with DMA on this chipset. config PATA_ISAPNP - tristate "ISA Plug and Play PATA support (Experimental)" - depends on EXPERIMENTAL && ISAPNP + tristate "ISA Plug and Play PATA support" + depends on ISAPNP help This option enables support for ISA plug & play ATA controllers such as those found on old soundcards. @@ -498,8 +498,8 @@ config PATA_NINJA32 If unsure, say N. config PATA_NS87410 - tristate "Nat Semi NS87410 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Nat Semi NS87410 PATA support" + depends on PCI help This option enables support for the National Semiconductor NS87410 PCI-IDE controller. @@ -507,8 +507,8 @@ config PATA_NS87410 If unsure, say N. config PATA_NS87415 - tristate "Nat Semi NS87415 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Nat Semi NS87415 PATA support" + depends on PCI help This option enables support for the National Semiconductor NS87415 PCI-IDE controller. @@ -544,8 +544,8 @@ config PATA_PCMCIA If unsure, say N. config PATA_PDC_OLD - tristate "Older Promise PATA controller support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Older Promise PATA controller support" + depends on PCI help This option enables support for the Promise 20246, 20262, 20263, 20265 and 20267 adapters. @@ -559,7 +559,7 @@ config PATA_QDI Support for QDI 6500 and 6580 PATA controllers on VESA local bus. config PATA_RADISYS - tristate "RADISYS 82600 PATA support (Very Experimental)" + tristate "RADISYS 82600 PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the RADISYS 82600 @@ -586,8 +586,8 @@ config PATA_RZ1000 If unsure, say N. config PATA_SC1200 - tristate "SC1200 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SC1200 PATA support" + depends on PCI help This option enables support for the NatSemi/AMD SC1200 SoC companion chip used with the Geode processor family. @@ -620,8 +620,8 @@ config PATA_SIL680 If unsure, say N. config PATA_SIS - tristate "SiS PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SiS PATA support" + depends on PCI help This option enables support for SiS PATA controllers -- cgit v1.2.3 From a3f07114e3359fb98683069ae397220e8992a24a Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 5 Nov 2008 12:47:09 -0500 Subject: [PATCH] Audit: make audit=0 actually turn off audit Currently audit=0 on the kernel command line does absolutely nothing. Audit always loads and always uses its resources such as creating the kernel netlink socket. This patch causes audit=0 to actually disable audit. Audit will use no resources and starting the userspace auditd daemon will not cause the kernel audit system to activate. Signed-off-by: Eric Paris Signed-off-by: Al Viro --- kernel/audit.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/kernel/audit.c b/kernel/audit.c index 4414e93d8750..d8646c23b427 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -61,8 +61,11 @@ #include "audit.h" -/* No auditing will take place until audit_initialized != 0. +/* No auditing will take place until audit_initialized == AUDIT_INITIALIZED. * (Initialization happens after skb_init is called.) */ +#define AUDIT_DISABLED -1 +#define AUDIT_UNINITIALIZED 0 +#define AUDIT_INITIALIZED 1 static int audit_initialized; #define AUDIT_OFF 0 @@ -965,6 +968,9 @@ static int __init audit_init(void) { int i; + if (audit_initialized == AUDIT_DISABLED) + return 0; + printk(KERN_INFO "audit: initializing netlink socket (%s)\n", audit_default ? "enabled" : "disabled"); audit_sock = netlink_kernel_create(&init_net, NETLINK_AUDIT, 0, @@ -976,7 +982,7 @@ static int __init audit_init(void) skb_queue_head_init(&audit_skb_queue); skb_queue_head_init(&audit_skb_hold_queue); - audit_initialized = 1; + audit_initialized = AUDIT_INITIALIZED; audit_enabled = audit_default; audit_ever_enabled |= !!audit_default; @@ -999,13 +1005,21 @@ __initcall(audit_init); static int __init audit_enable(char *str) { audit_default = !!simple_strtol(str, NULL, 0); - printk(KERN_INFO "audit: %s%s\n", - audit_default ? "enabled" : "disabled", - audit_initialized ? "" : " (after initialization)"); - if (audit_initialized) { + if (!audit_default) + audit_initialized = AUDIT_DISABLED; + + printk(KERN_INFO "audit: %s", audit_default ? "enabled" : "disabled"); + + if (audit_initialized == AUDIT_INITIALIZED) { audit_enabled = audit_default; audit_ever_enabled |= !!audit_default; + } else if (audit_initialized == AUDIT_UNINITIALIZED) { + printk(" (after initialization)"); + } else { + printk(" (until reboot)"); } + printk("\n"); + return 1; } @@ -1146,7 +1160,7 @@ struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, int reserve; unsigned long timeout_start = jiffies; - if (!audit_initialized) + if (audit_initialized != AUDIT_INITIALIZED) return NULL; if (unlikely(audit_filter_type(type))) -- cgit v1.2.3 From a64e64944f4b8ce3288519555dbaa0232414b8ac Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 12 Nov 2008 18:37:41 -0500 Subject: [PATCH] return records for fork() both to child and parent Signed-off-by: Al Viro --- include/linux/audit.h | 2 ++ kernel/auditsc.c | 17 +++++++++++++++++ kernel/fork.c | 1 + 3 files changed, 20 insertions(+) diff --git a/include/linux/audit.h b/include/linux/audit.h index 6272a395d43c..1b2a6a5c1876 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -391,6 +391,7 @@ extern int audit_classify_arch(int arch); #ifdef CONFIG_AUDITSYSCALL /* These are defined in auditsc.c */ /* Public API */ +extern void audit_finish_fork(struct task_struct *child); extern int audit_alloc(struct task_struct *task); extern void audit_free(struct task_struct *task); extern void audit_syscall_entry(int arch, @@ -504,6 +505,7 @@ static inline int audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat) extern int audit_n_rules; extern int audit_signals; #else +#define audit_finish_fork(t) #define audit_alloc(t) ({ 0; }) #define audit_free(t) do { ; } while (0) #define audit_syscall_entry(ta,a,b,c,d,e) do { ; } while (0) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index cf5bc2f5f9c3..de8468050afa 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -1548,6 +1548,23 @@ void audit_syscall_entry(int arch, int major, context->ppid = 0; } +void audit_finish_fork(struct task_struct *child) +{ + struct audit_context *ctx = current->audit_context; + struct audit_context *p = child->audit_context; + if (!p || !ctx || !ctx->auditable) + return; + p->arch = ctx->arch; + p->major = ctx->major; + memcpy(p->argv, ctx->argv, sizeof(ctx->argv)); + p->ctime = ctx->ctime; + p->dummy = ctx->dummy; + p->auditable = ctx->auditable; + p->in_syscall = ctx->in_syscall; + p->filterkey = kstrdup(ctx->filterkey, GFP_KERNEL); + p->ppid = current->pid; +} + /** * audit_syscall_exit - deallocate audit context after a system call * @tsk: task being audited diff --git a/kernel/fork.c b/kernel/fork.c index 2a372a0e206f..8d6a7dd9282b 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1398,6 +1398,7 @@ long do_fork(unsigned long clone_flags, init_completion(&vfork); } + audit_finish_fork(p); tracehook_report_clone(trace, regs, clone_flags, nr, p); /* -- cgit v1.2.3 From 0b0c940a91f8e6fd0e1be3e01d5e98997446233b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 18 Nov 2008 15:03:49 +0800 Subject: [PATCH] asm/generic: fix bug - kernel fails to build when enable some common audit code on Blackfin If you enable some common audit code, the kernel fails to build. In file included from lib/audit.c:17: include/asm-generic/audit_write.h:3: error: '__NR_swapon' undeclared here (not in a function) make[1]: *** [lib/audit.o] Error 1 make: *** [lib] Error 2 So do not use __NR_swapon if it isnt defined for a port. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Al Viro --- include/asm-generic/audit_write.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-generic/audit_write.h b/include/asm-generic/audit_write.h index f10d367fb2a5..c5f1c2c920e2 100644 --- a/include/asm-generic/audit_write.h +++ b/include/asm-generic/audit_write.h @@ -1,6 +1,8 @@ #include __NR_acct, +#ifdef __NR_swapon __NR_swapon, +#endif __NR_quotactl, __NR_truncate, #ifdef __NR_truncate64 -- cgit v1.2.3 From 7f0ed77d241b60f70136f15b8eef30a3de1fa249 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 1 Dec 2008 14:16:06 -0800 Subject: [patch 1/1] audit: remove excess kernel-doc Delete excess kernel-doc notation in kernel/auditsc.c: Warning(linux-2.6.27-git10//kernel/auditsc.c:1481): Excess function parameter or struct member 'tsk' description in 'audit_syscall_entry' Warning(linux-2.6.27-git10//kernel/auditsc.c:1564): Excess function parameter or struct member 'tsk' description in 'audit_syscall_exit' Signed-off-by: Randy Dunlap Cc: Al Viro Cc: Eric Paris Signed-off-by: Andrew Morton Signed-off-by: Al Viro --- kernel/auditsc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index de8468050afa..0a13d6895494 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -1459,7 +1459,6 @@ void audit_free(struct task_struct *tsk) /** * audit_syscall_entry - fill in an audit record at syscall entry - * @tsk: task being audited * @arch: architecture type * @major: major syscall type (function) * @a1: additional syscall register 1 @@ -1567,7 +1566,6 @@ void audit_finish_fork(struct task_struct *child) /** * audit_syscall_exit - deallocate audit context after a system call - * @tsk: task being audited * @valid: success/failure flag * @return_code: syscall return value * -- cgit v1.2.3 From 48887e63d6e057543067327da6b091297f7fe645 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 6 Dec 2008 01:05:50 -0500 Subject: [PATCH] fix broken timestamps in AVC generated by kernel threads Timestamp in audit_context is valid only if ->in_syscall is set. Signed-off-by: Al Viro --- include/linux/audit.h | 4 ++-- kernel/audit.c | 4 +--- kernel/auditsc.c | 5 ++++- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/include/linux/audit.h b/include/linux/audit.h index 1b2a6a5c1876..8f0672d13eb1 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -435,7 +435,7 @@ static inline void audit_ptrace(struct task_struct *t) /* Private API (for audit.c only) */ extern unsigned int audit_serial(void); -extern void auditsc_get_stamp(struct audit_context *ctx, +extern int auditsc_get_stamp(struct audit_context *ctx, struct timespec *t, unsigned int *serial); extern int audit_set_loginuid(struct task_struct *task, uid_t loginuid); #define audit_get_loginuid(t) ((t)->loginuid) @@ -518,7 +518,7 @@ extern int audit_signals; #define audit_inode(n,d) do { ; } while (0) #define audit_inode_child(d,i,p) do { ; } while (0) #define audit_core_dumps(i) do { ; } while (0) -#define auditsc_get_stamp(c,t,s) do { BUG(); } while (0) +#define auditsc_get_stamp(c,t,s) (0) #define audit_get_loginuid(t) (-1) #define audit_get_sessionid(t) (-1) #define audit_log_task_context(b) do { ; } while (0) diff --git a/kernel/audit.c b/kernel/audit.c index d8646c23b427..ce6d8ea3131e 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -1121,9 +1121,7 @@ unsigned int audit_serial(void) static inline void audit_get_stamp(struct audit_context *ctx, struct timespec *t, unsigned int *serial) { - if (ctx) - auditsc_get_stamp(ctx, t, serial); - else { + if (!ctx || !auditsc_get_stamp(ctx, t, serial)) { *t = CURRENT_TIME; *serial = audit_serial(); } diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 0a13d6895494..2a3f0afc4d2a 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -1957,15 +1957,18 @@ EXPORT_SYMBOL_GPL(__audit_inode_child); * * Also sets the context as auditable. */ -void auditsc_get_stamp(struct audit_context *ctx, +int auditsc_get_stamp(struct audit_context *ctx, struct timespec *t, unsigned int *serial) { + if (!ctx->in_syscall) + return 0; if (!ctx->serial) ctx->serial = audit_serial(); t->tv_sec = ctx->ctime.tv_sec; t->tv_nsec = ctx->ctime.tv_nsec; *serial = ctx->serial; ctx->auditable = 1; + return 1; } /* global counter which is incremented every time something logs in */ -- cgit v1.2.3 From f3179748a157c21d44d929fd3779421ebfbeaa93 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 9 Dec 2008 15:54:18 +1100 Subject: radeonfb: Disable new color expand acceleration unless explicitely enabled This new color expansion acceleration for radeonfb appears to trigger problems with X on VT switch and suspend/resume on some machines. It might be a problem in the VT layer or in X, but I haven't quite found it yet, so in the meantime, this disables the acceleration by default, reverting to 2.6.27 state. It can be enabled using the "accel_cexp" module parameter or fbdev argument. Signed-off-by: Benjamin Herrenschmidt Acked-by: David S. Miller Signed-off-by: Linus Torvalds --- drivers/video/aty/radeon_accel.c | 3 ++- drivers/video/aty/radeon_base.c | 6 ++++++ drivers/video/aty/radeonfb.h | 2 ++ 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c index a547e5d4c8bf..8da5e5ab8547 100644 --- a/drivers/video/aty/radeon_accel.c +++ b/drivers/video/aty/radeon_accel.c @@ -256,7 +256,8 @@ void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image) return; /* We only do 1 bpp color expansion for now */ - if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1) + if (!accel_cexp || + (info->flags & FBINFO_HWACCEL_DISABLED) || image->depth != 1) goto fallback; /* Fallback if running out of the screen. We may do clipping diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index b3ffe8205d2b..d5b27f9d374d 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -282,6 +282,8 @@ static int backlight = 1; static int backlight = 0; #endif +int accel_cexp = 0; + /* * prototypes */ @@ -2520,6 +2522,8 @@ static int __init radeonfb_setup (char *options) } else if (!strncmp(this_opt, "ignore_devlist", 14)) { ignore_devlist = 1; #endif + } else if (!strncmp(this_opt, "accel_cexp", 12)) { + accel_cexp = 1; } else mode_option = this_opt; } @@ -2567,6 +2571,8 @@ module_param(monitor_layout, charp, 0); MODULE_PARM_DESC(monitor_layout, "Specify monitor mapping (like XFree86)"); module_param(force_measure_pll, bool, 0); MODULE_PARM_DESC(force_measure_pll, "Force measurement of PLL (debug)"); +module_param(accel_cexp, bool, 0); +MODULE_PARM_DESC(accel_cexp, "Use acceleration engine for color expansion"); #ifdef CONFIG_MTRR module_param(nomtrr, bool, 0); MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers"); diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index ea0b5b47acaf..974ca6d86540 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -638,4 +638,6 @@ static inline void radeonfb_bl_init(struct radeonfb_info *rinfo) {} static inline void radeonfb_bl_exit(struct radeonfb_info *rinfo) {} #endif +extern int accel_cexp; + #endif /* __RADEONFB_H__ */ -- cgit v1.2.3 From fc10212583996e248dde1da74cfeccd2f7e6b675 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 9 Dec 2008 10:01:26 -0800 Subject: [IA64] remove BUILD_BUG_ON from paravirt_getreg() CC arch/ia64/kernel/asm-offsets.s In file included from include/linux/bitops.h:17, from include/linux/kernel.h:15, from include/linux/sched.h:52, from arch/ia64/kernel/asm-offsets.c:9: arch/ia64/include/asm/bitops.h: In function 'set_bit': arch/ia64/include/asm/bitops.h:47: error: implicit declaration of function 'BUILD_BUG_ON' Obvious inclusion of kernel.h doesn't fix it, because of circular dependencies involving fls.h and log2(). Fixing the latter requires some serious header surgery, it seems, so just remove BUILD_BUG_ON for now. Signed-off-by: Alexey Dobriyan Signed-off-by: Tony Luck --- arch/ia64/include/asm/paravirt_privop.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h index 0b597424fcfc..33c8e55f5775 100644 --- a/arch/ia64/include/asm/paravirt_privop.h +++ b/arch/ia64/include/asm/paravirt_privop.h @@ -83,7 +83,6 @@ extern unsigned long ia64_native_getreg_func(int regnum); #define paravirt_getreg(reg) \ ({ \ unsigned long res; \ - BUILD_BUG_ON(!__builtin_constant_p(reg)); \ if ((reg) == _IA64_REG_IP) \ res = ia64_native_getreg(_IA64_REG_IP); \ else \ -- cgit v1.2.3 From 6afc9be1de0b938169d8985a3add0e3727ebc717 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 1 Dec 2008 14:18:37 -0800 Subject: [IA64] eliminate NULL test and memset after alloc_bootmem As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. Signed-off-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/setup.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index bb1d24929640..b683eb355827 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -512,7 +512,6 @@ static void __init sn_init_pdas(char **cmdline_p) for_each_online_node(cnode) { nodepdaindr[cnode] = alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t)); - memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); memset(nodepdaindr[cnode]->phys_cpuid, -1, sizeof(nodepdaindr[cnode]->phys_cpuid)); spin_lock_init(&nodepdaindr[cnode]->ptc_lock); @@ -521,11 +520,9 @@ static void __init sn_init_pdas(char **cmdline_p) /* * Allocate & initialize nodepda for TIOs. For now, put them on node 0. */ - for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) { + for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) nodepdaindr[cnode] = alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t)); - memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); - } /* * Now copy the array of nodepda pointers to each nodepda. -- cgit v1.2.3 From 023a407f1cdc8b86903495d7ce0d2abae0f8bce5 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 9 Dec 2008 10:51:32 -0600 Subject: [IA64] Fix GRU compile error w/o CONFIG_HUGETLB_PAGE Eliminate compile error when compiling without CONFIG_HUGETLB_PAGE. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- drivers/misc/sgi-gru/grufault.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c index 8c389d606c30..3ee698ad8599 100644 --- a/drivers/misc/sgi-gru/grufault.c +++ b/drivers/misc/sgi-gru/grufault.c @@ -254,7 +254,11 @@ static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr, return 1; *paddr = pte_pfn(pte) << PAGE_SHIFT; +#ifdef CONFIG_HUGETLB_PAGE *pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT; +#else + *pageshift = PAGE_SHIFT; +#endif return 0; err: -- cgit v1.2.3 From 9877e7b855dce9494a05f56f8ca6357f0b4b9169 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 8 Dec 2008 08:43:46 -0600 Subject: [IA64] Updated the generic_defconfig to work with the 2.6.28-rc7 kernel. The AUTOFS=y and AUTOFS4=y causes problems with some distros versions of automount. I turned both of those to =m and then followed the default prompts for everything else. I did notice that CONFIG_PNP_DEBUG got changed to CONFIG_PNP_DEBUG_MESSAGES and the default was a =y so I turned that back to a =n. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 218 ++++++++++++++++++++++++------------ 1 file changed, 147 insertions(+), 71 deletions(-) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index e05f9e1d3faa..27eb67604c53 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Mon Aug 4 15:38:01 2008 +# Linux kernel version: 2.6.28-rc7 +# Mon Dec 8 08:12:07 2008 # CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -26,6 +26,7 @@ CONFIG_LOG_BUF_SHIFT=20 CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set CONFIG_CPUSETS=y # CONFIG_GROUP_SCHED is not set @@ -46,7 +47,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -63,7 +63,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -72,15 +74,11 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -113,6 +111,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -125,8 +124,6 @@ CONFIG_MMU=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -139,13 +136,16 @@ CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_IA64_UNCACHED_ALLOCATOR=y CONFIG_AUDIT_ARCH=y +# CONFIG_PARAVIRT_GUEST is not set CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set +# CONFIG_IA64_DIG_VTD is not set # CONFIG_IA64_HP_ZX1 is not set # CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set # CONFIG_IA64_SGI_UV is not set # CONFIG_IA64_HP_SIM is not set +# CONFIG_IA64_XEN_GUEST is not set # CONFIG_ITANIUM is not set CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_4KB is not set @@ -182,16 +182,17 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_MMU_NOTIFIER=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y @@ -231,12 +232,12 @@ CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y CONFIG_DMIID=y CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m -# CONFIG_DMAR is not set - # -# Power management and ACPI +# Power management and ACPI options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set @@ -248,7 +249,6 @@ CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=y -# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m @@ -256,9 +256,7 @@ CONFIG_ACPI_NUMA=y # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_EC=y # CONFIG_ACPI_PCI_SLOT is not set -CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -275,7 +273,7 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set +CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_PCI=m @@ -286,6 +284,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_HOTPLUG_PCI_SHPC is not set # CONFIG_HOTPLUG_PCI_SGI is not set # CONFIG_PCCARD is not set +CONFIG_DMAR=y CONFIG_NET=y # @@ -333,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -353,11 +353,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -385,7 +384,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y -# CONFIG_PNP_DEBUG is not set +# CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols @@ -419,10 +418,9 @@ CONFIG_SGI_XP=m # CONFIG_HP_ILO is not set CONFIG_SGI_GRU=m # CONFIG_SGI_GRU_DEBUG is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives @@ -430,12 +428,12 @@ CONFIG_BLK_DEV_IDE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=y CONFIG_BLK_DEV_IDESCSI=m # CONFIG_BLK_DEV_IDEACPI is not set # CONFIG_IDE_TASK_IOCTL is not set @@ -705,6 +703,9 @@ CONFIG_TULIP=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -725,11 +726,11 @@ CONFIG_E100=m # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set CONFIG_IGB=y @@ -747,18 +748,22 @@ CONFIG_TIGON3=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -826,9 +831,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -942,15 +949,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=m # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -959,6 +967,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -1009,6 +1019,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1113,8 +1124,7 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # @@ -1122,6 +1132,34 @@ CONFIG_USB_HID=m # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BRIGHT=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DELL=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GYRATION=m +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1138,6 +1176,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1155,6 +1196,12 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# Enable Host or Gadget support to see Inventra options +# # # USB Device Class drivers @@ -1162,13 +1209,14 @@ CONFIG_USB_UHCI_HCD=m # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1191,7 +1239,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1204,7 +1251,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1222,7 +1269,9 @@ CONFIG_USB_MON=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1246,6 +1295,15 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y + +# +# HP Simulator drivers +# +# CONFIG_HP_SIMETH is not set +# CONFIG_HP_SIMSERIAL is not set +# CONFIG_HP_SIMSCSI is not set CONFIG_MSPEC=m # @@ -1260,7 +1318,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y @@ -1271,6 +1329,7 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -1282,8 +1341,8 @@ CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set # @@ -1314,6 +1373,7 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1356,6 +1416,7 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_XPRT_RDMA=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1433,38 +1494,6 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -CONFIG_HAVE_KVM=y -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_IRQ_PER_CPU=y - -# -# HP Simulator drivers -# -# CONFIG_HP_SIMETH is not set -# CONFIG_HP_SIMSERIAL is not set -# CONFIG_HP_SIMSCSI is not set # # Kernel hacking @@ -1503,8 +1532,19 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set @@ -1519,14 +1559,19 @@ CONFIG_SYSVIPC_COMPAT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1599,5 +1644,36 @@ CONFIG_CRYPTO_DES=m # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_IRQ_PER_CPU=y -- cgit v1.2.3 From 6882edc04f37691ff9c7fcb30b52506cd7697eb0 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 8 Dec 2008 08:43:46 -0600 Subject: [IA64] Clear up section mismatch for sn_check_wars. The generic_defconfig has three section mismatches. This clears up sn_check_wars(). Signed-off-by: Robin Holt Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index b683eb355827..02c5b8a9fb60 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -200,7 +200,7 @@ static int __cpuinitdata shub_1_1_found; * Set flag for enabling shub specific wars */ -static inline int __init is_shub_1_1(int nasid) +static inline int __cpuinit is_shub_1_1(int nasid) { unsigned long id; int rev; @@ -212,7 +212,7 @@ static inline int __init is_shub_1_1(int nasid) return rev <= 2; } -static void __init sn_check_for_wars(void) +static void __cpuinit sn_check_for_wars(void) { int cnode; -- cgit v1.2.3 From 8704ad8552c5954b2cd9b3c76b4c50471049ad7f Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 8 Dec 2008 08:43:46 -0600 Subject: [IA64] Clear up section mismatch with arch_unregister_cpu() The generic_defconfig has three section mismatches. This clears arch_unregister_cpu() Signed-off-by: Robin Holt Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/kernel/topology.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 26228e2d01ae..c75b914f2d6b 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -53,10 +53,12 @@ int __ref arch_register_cpu(int num) } EXPORT_SYMBOL(arch_register_cpu); -void arch_unregister_cpu(int num) +void __ref arch_unregister_cpu(int num) { unregister_cpu(&sysfs_cpus[num].cpu); +#ifdef CONFIG_ACPI unmap_cpu_from_node(num, cpu_to_node(num)); +#endif } EXPORT_SYMBOL(arch_unregister_cpu); #else -- cgit v1.2.3 From ecdbc6906e4c31bc387c64490e31ae3e0f929479 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 8 Dec 2008 15:47:20 -0800 Subject: [IA64] Clear up section mismatch for ioc4_ide_attach_one. The generic_defconfig has three section mismatches. This clears up ioc4_ide_attach_one(). Signed-off-by: Robin Holt Signed-off-by: Mike Reid Signed-off-by: Tony Luck --- drivers/ide/sgiioc4.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c index 7defa0ae2014..a687a7dfea6f 100644 --- a/drivers/ide/sgiioc4.c +++ b/drivers/ide/sgiioc4.c @@ -550,7 +550,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = { .dma_timeout = ide_dma_timeout, }; -static const struct ide_port_info sgiioc4_port_info __devinitdata = { +static const struct ide_port_info sgiioc4_port_info __devinitconst = { .name = DRV_NAME, .chipset = ide_pci, .init_dma = ide_dma_sgiioc4, @@ -633,7 +633,7 @@ out: return ret; } -int +int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd) { /* PCI-RT does not bring out IDE connection. @@ -645,7 +645,7 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd) return pci_init_sgiioc4(idd->idd_pdev); } -static struct ioc4_submodule ioc4_ide_submodule = { +static struct ioc4_submodule __devinitdata ioc4_ide_submodule = { .is_name = "IOC4_ide", .is_owner = THIS_MODULE, .is_probe = ioc4_ide_attach_one, -- cgit v1.2.3 From 3c0db899bff2acbf1b36c65763de4d0133910104 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 8 Dec 2008 16:16:21 -0800 Subject: [IA64] Fix section mismatch ioc3uart_init()/ioc3uart_submodule s/ioc3uart_submodule/ioc3uart_ops/ makes the section mismatch check happy. Signed-off-by: Tony Luck --- drivers/serial/ioc3_serial.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 6dd98f9fb89c..ae3699d77dd0 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -2149,7 +2149,7 @@ out4: return ret; } -static struct ioc3_submodule ioc3uart_submodule = { +static struct ioc3_submodule ioc3uart_ops = { .name = "IOC3uart", .probe = ioc3uart_probe, .remove = ioc3uart_remove, @@ -2173,7 +2173,7 @@ static int __devinit ioc3uart_init(void) __func__); return ret; } - ret = ioc3_register_submodule(&ioc3uart_submodule); + ret = ioc3_register_submodule(&ioc3uart_ops); if (ret) uart_unregister_driver(&ioc3_uart); return ret; @@ -2181,7 +2181,7 @@ static int __devinit ioc3uart_init(void) static void __devexit ioc3uart_exit(void) { - ioc3_unregister_submodule(&ioc3uart_submodule); + ioc3_unregister_submodule(&ioc3uart_ops); uart_unregister_driver(&ioc3_uart); } -- cgit v1.2.3 From 9a2bd244e18ffbb96c8b783210fda4eded7c7e6f Mon Sep 17 00:00:00 2001 From: Brian King Date: Tue, 9 Dec 2008 08:47:00 -0600 Subject: sched: CPU remove deadlock fix Impact: fix possible deadlock in CPU hot-remove path This patch fixes a possible deadlock scenario in the CPU remove path. migration_call grabs rq->lock, then wakes up everything on rq->migration_queue with the lock held. Then one of the tasks on the migration queue ends up calling tg_shares_up which then also tries to acquire the same rq->lock. [c000000058eab2e0] c000000000502078 ._spin_lock_irqsave+0x98/0xf0 [c000000058eab370] c00000000008011c .tg_shares_up+0x10c/0x20c [c000000058eab430] c00000000007867c .walk_tg_tree+0xc4/0xfc [c000000058eab4d0] c0000000000840c8 .try_to_wake_up+0xb0/0x3c4 [c000000058eab590] c0000000000799a0 .__wake_up_common+0x6c/0xe0 [c000000058eab640] c00000000007ada4 .complete+0x54/0x80 [c000000058eab6e0] c000000000509fa8 .migration_call+0x5fc/0x6f8 [c000000058eab7c0] c000000000504074 .notifier_call_chain+0x68/0xe0 [c000000058eab860] c000000000506568 ._cpu_down+0x2b0/0x3f4 [c000000058eaba60] c000000000506750 .cpu_down+0xa4/0x108 [c000000058eabb10] c000000000507e54 .store_online+0x44/0xa8 [c000000058eabba0] c000000000396260 .sysdev_store+0x3c/0x50 [c000000058eabc10] c0000000001a39b8 .sysfs_write_file+0x124/0x18c [c000000058eabcd0] c00000000013061c .vfs_write+0xd0/0x1bc [c000000058eabd70] c0000000001308a4 .sys_write+0x68/0x114 [c000000058eabe30] c0000000000086b4 syscall_exit+0x0/0x40 Signed-off-by: Brian King Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index b7480fb5c3dc..e4bb1dd7b308 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6587,7 +6587,9 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu) req = list_entry(rq->migration_queue.next, struct migration_req, list); list_del_init(&req->list); + spin_unlock_irq(&rq->lock); complete(&req->done); + spin_lock_irq(&rq->lock); } spin_unlock_irq(&rq->lock); break; -- cgit v1.2.3 From ec9a13cdbfc8cf29502096ca69b65f07184a9b2c Mon Sep 17 00:00:00 2001 From: Nigel Cunningham Date: Tue, 9 Dec 2008 22:40:20 +1100 Subject: ieee1394: node manager causes up to ~3.25s delay in freezing tasks The firewire nodemanager function "nodemgr_host_thread" contains a loop that calls try_to_freeze near the top of the loop, but then delays for up to 3.25 seconds (plus time to do work) before getting back to the top of the loop. When starting a cycle post-boot, this doesn't seem to bite, but it is causing a noticeable delay at boot time, when freezing processes prior to starting to read the image. The following patch adds invocation of try_to_freeze to the subloops that are used in the body of this function. With these additions, the time to freeze when starting to resume at boot time is virtually zero. I'm no expert on firewire, and so don't know that we shouldn't check the return value and jump back to the top of the loop or such like after being frozen, but I submit it for your consideration. Signed-off-by: Nigel Cunningham The delay until nodemgr freezes was up to 0.25s (plus time for node probes) in Linux 2.6.27 and older and up to 3.25s (plus ~) since Linux 2.6.28-rc1, hence much more noticeable. try_to_freeze() without any jump is correct. The surrounding code in the respective loops will catch whether another bus reset happens during the freeze and handle it. Signed-off-by: Stefan Richter --- drivers/ieee1394/nodemgr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 9e39f73282ee..d333ae22459c 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1685,6 +1685,7 @@ static int nodemgr_host_thread(void *data) g = get_hpsb_generation(host); for (i = 0; i < 4 ; i++) { msleep_interruptible(63); + try_to_freeze(); if (kthread_should_stop()) goto exit; @@ -1725,6 +1726,7 @@ static int nodemgr_host_thread(void *data) /* Sleep 3 seconds */ for (i = 3000/200; i; i--) { msleep_interruptible(200); + try_to_freeze(); if (kthread_should_stop()) goto exit; -- cgit v1.2.3 From ff740fb02146c83d96def1b897ed232b4e0fbcfd Mon Sep 17 00:00:00 2001 From: John Keller Date: Mon, 8 Dec 2008 11:44:11 -0600 Subject: [IA64] SN: prevent IRQ retargetting in request_irq() With the introduction of the generic affinity autoselector, irq_select_affinity(), IRQs are now being retargetted, using a default mask, via the request_irq() path. This results in all IRQs targetted at CPU 0. SN Altix assigns affinity in the SN PROM, and does not expect that to be changed as part of request_irq(). Set the IRQ_AFFINITY_SET flag to prevent request_irq() from resetting affinity. Signed-off-by: John Keller Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/irq.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 96c31b4180c3..0c66dbdd1d72 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2000-2008 Silicon Graphics, Inc. All Rights Reserved. */ #include @@ -375,6 +375,7 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info) int cpu = nasid_slice_to_cpuid(nasid, slice); #ifdef CONFIG_SMP int cpuphys; + irq_desc_t *desc; #endif pci_dev_get(pci_dev); @@ -391,6 +392,12 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info) #ifdef CONFIG_SMP cpuphys = cpu_physical_id(cpu); set_irq_affinity_info(sn_irq_info->irq_irq, cpuphys, 0); + desc = irq_to_desc(sn_irq_info->irq_irq); + /* + * Affinity was set by the PROM, prevent it from + * being reset by the request_irq() path. + */ + desc->status |= IRQ_AFFINITY_SET; #endif } -- cgit v1.2.3 From 98873f53becea9a8a46972ff252e96fe575b120d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 9 Dec 2008 17:58:46 +0000 Subject: MIPS: Better than nothing implementation of PCI mmap to fix X. Certain X11 servers such as the SIS server will only work if PCI mmap is implemented. This patch implements PCI mmap but to be on the same side so close to a release it only supports uncached mappings so performance will not be optimal for some uses such as framebuffers. Thanks to Zhang Le for the original report and testing. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/pci.h | 5 +++++ arch/mips/pci/pci.c | 24 ++++++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index 5510c53b7feb..053e4634acee 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -79,6 +79,11 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) /* We don't do dynamic PCI IRQ allocation */ } +#define HAVE_PCI_MMAP + +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + /* * Dynamic DMA mapping stuff. * MIPS has everything mapped statically. diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index a377e9d2d029..62cae740e250 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -354,6 +354,30 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO); EXPORT_SYMBOL(PCIBIOS_MIN_MEM); #endif +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + unsigned long prot; + + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + prot = pgprot_val(vma->vm_page_prot); + prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED; + vma->vm_page_prot = __pgprot(prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + char * (*pcibios_plat_setup)(char *str) __devinitdata; char *__devinit pcibios_setup(char *str) -- cgit v1.2.3 From 3b5dd45e947ecd21491e1658fba7bb4bc4a54995 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Mon, 1 Dec 2008 18:17:21 -0700 Subject: PCI: stop leaking 'slot_name' in pci_create_slot In pci_create_slot(), the local variable 'slot_name' is allocated by make_slot_name(), but never freed. We never use it after passing it to the kobject core, so we should free it upon function exit. Cc: stable@kernel.org Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/slot.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 4dd1c3e157ae..5a8ccb4f604d 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -253,6 +253,7 @@ placeholder: __func__, pci_domain_nr(parent), parent->number, slot_nr); out: + kfree(slot_name); up_write(&pci_bus_sem); return slot; err: -- cgit v1.2.3 From 2a42d9dba7842422ffb2c02e75288a8bc2fd5065 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Tue, 9 Dec 2008 13:05:09 +0100 Subject: PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch Makes a Compaq 6735s boot reliably again. It used to hang in the loop on some boots. Give the link one second to train, otherwise break out of the loop and reset the previously set clock bits. Cc: stable@vger.kernel.org Signed-off-by: Thomas Renninger Signed-off-by: Shaohua Li Signed-off-by: Matthew Garrett Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 8f63f4c6b85f..9aad608bcf3f 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include "../pci.h" @@ -161,11 +162,12 @@ static void pcie_check_clock_pm(struct pci_dev *pdev) */ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) { - int pos, child_pos; + int pos, child_pos, i = 0; u16 reg16 = 0; struct pci_dev *child_dev; int same_clock = 1; - + unsigned long start_jiffies; + u16 child_regs[8], parent_reg; /* * all functions of a slot should have the same Slot Clock * Configuration, so just check one function @@ -191,16 +193,19 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, ®16); + child_regs[i] = reg16; if (same_clock) reg16 |= PCI_EXP_LNKCTL_CCC; else reg16 &= ~PCI_EXP_LNKCTL_CCC; pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, reg16); + i++; } /* Configure upstream component */ pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); + parent_reg = reg16; if (same_clock) reg16 |= PCI_EXP_LNKCTL_CCC; else @@ -212,12 +217,30 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); /* Wait for link training end */ - while (1) { + /* break out after waiting for 1 second */ + start_jiffies = jiffies; + while ((jiffies - start_jiffies) < HZ) { pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16); if (!(reg16 & PCI_EXP_LNKSTA_LT)) break; cpu_relax(); } + /* training failed -> recover */ + if ((jiffies - start_jiffies) >= HZ) { + dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure" + " common clock\n"); + i = 0; + list_for_each_entry(child_dev, &pdev->subordinate->devices, + bus_list) { + child_pos = pci_find_capability(child_dev, + PCI_CAP_ID_EXP); + pci_write_config_word(child_dev, + child_pos + PCI_EXP_LNKCTL, + child_regs[i]); + i++; + } + pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg); + } } /* -- cgit v1.2.3 From 85f334666a771680472722eee43ae0fc8730a619 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Tue, 9 Dec 2008 19:36:38 -0800 Subject: tracehook: exec double-reporting fix The patch 6341c39 "tracehook: exec" introduced a small regression in 2.6.27 regarding binfmt_misc exec event reporting. Since the reporting is now done in the common search_binary_handler() function, an exec of a misc binary will result in two (or possibly multiple) exec events being reported, instead of just a single one, because the misc handler contains a recursive call to search_binary_handler. To add to the confusion, if PTRACE_O_TRACEEXEC is not active, the multiple SIGTRAP signals will in fact cause only a single ptrace intercept, as the signals are not queued. However, if PTRACE_O_TRACEEXEC is on, the debugger will actually see multiple ptrace intercepts (PTRACE_EVENT_EXEC). The test program included below demonstrates the problem. This change fixes the bug by calling tracehook_report_exec() only in the outermost search_binary_handler() call (bprm->recursion_depth == 0). The additional change to restore bprm->recursion_depth after each binfmt load_binary call is actually superfluous for this bug, since we test the value saved on entry to search_binary_handler(). But it keeps the use of of the depth count to its most obvious expected meaning. Depending on what binfmt handlers do in certain cases, there could have been false-positive tests for recursion limits before this change. /* Test program using PTRACE_O_TRACEEXEC. This forks and exec's the first argument with the rest of the arguments, while ptrace'ing. It expects to see one PTRACE_EVENT_EXEC stop and then a successful exit, with no other signals or events in between. Test for kernel doing two PTRACE_EVENT_EXEC stops for a binfmt_misc exec: $ gcc -g traceexec.c -o traceexec $ sudo sh -c 'echo :test:M::foobar::/bin/cat: > /proc/sys/fs/binfmt_misc/register' $ echo 'foobar test' > ./foobar $ chmod +x ./foobar $ ./traceexec ./foobar; echo $? ==> good <== foobar test 0 $ ==> bad <== foobar test unexpected status 0x4057f != 0 3 $ */ #include #include #include #include #include #include #include static void wait_for (pid_t child, int expect) { int status; pid_t p = wait (&status); if (p != child) { perror ("wait"); exit (2); } if (status != expect) { fprintf (stderr, "unexpected status %#x != %#x\n", status, expect); exit (3); } } int main (int argc, char **argv) { pid_t child = fork (); if (child < 0) { perror ("fork"); return 127; } else if (child == 0) { ptrace (PTRACE_TRACEME); raise (SIGUSR1); execv (argv[1], &argv[1]); perror ("execve"); _exit (127); } wait_for (child, W_STOPCODE (SIGUSR1)); if (ptrace (PTRACE_SETOPTIONS, child, 0L, (void *) (long) PTRACE_O_TRACEEXEC) != 0) { perror ("PTRACE_SETOPTIONS"); return 4; } if (ptrace (PTRACE_CONT, child, 0L, 0L) != 0) { perror ("PTRACE_CONT"); return 5; } wait_for (child, W_STOPCODE (SIGTRAP | (PTRACE_EVENT_EXEC << 8))); if (ptrace (PTRACE_CONT, child, 0L, 0L) != 0) { perror ("PTRACE_CONT"); return 6; } wait_for (child, W_EXITCODE (0, 0)); return 0; } Reported-by: Arnd Bergmann CC: Ulrich Weigand Signed-off-by: Roland McGrath --- fs/exec.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/exec.c b/fs/exec.c index 4e834f16d9da..ec5df9a38313 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1159,6 +1159,7 @@ EXPORT_SYMBOL(remove_arg_zero); */ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs) { + unsigned int depth = bprm->recursion_depth; int try,retval; struct linux_binfmt *fmt; #ifdef __alpha__ @@ -1219,8 +1220,15 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs) continue; read_unlock(&binfmt_lock); retval = fn(bprm, regs); + /* + * Restore the depth counter to its starting value + * in this call, so we don't have to rely on every + * load_binary function to restore it on return. + */ + bprm->recursion_depth = depth; if (retval >= 0) { - tracehook_report_exec(fmt, bprm, regs); + if (depth == 0) + tracehook_report_exec(fmt, bprm, regs); put_binfmt(fmt); allow_write_access(bprm->file); if (bprm->file) -- cgit v1.2.3 From 1d1dc5e83f3299c108a4e44d58cc4bfef48c876a Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 10 Dec 2008 00:20:38 +0100 Subject: firewire: fw-ohci: fix IOMMU resource exhaustion There is a DMA map/ unmap imbalance whenever a block write request packet is sent and then dequeued with ohci_cancel_packet. The latter may happen frequently if the AR resp tasklet is executed before the AT req tasklet for the same transaction. Add the missing dma_unmap_single. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=475156 Reported-by: Emmanuel Kowalski Tested-by: Emmanuel Kowalski Signed-off-by: Stefan Richter --- drivers/firewire/fw-ohci.c | 11 +++++++---- drivers/firewire/fw-transaction.c | 3 +++ drivers/firewire/fw-transaction.h | 2 ++ 3 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 46610b090415..ab9c01e462ef 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -974,6 +974,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet) packet->ack = RCODE_SEND_ERROR; return -1; } + packet->payload_bus = payload_bus; d[2].req_count = cpu_to_le16(packet->payload_length); d[2].data_address = cpu_to_le32(payload_bus); @@ -1025,7 +1026,6 @@ static int handle_at_packet(struct context *context, struct driver_data *driver_data; struct fw_packet *packet; struct fw_ohci *ohci = context->ohci; - dma_addr_t payload_bus; int evt; if (last->transfer_status == 0) @@ -1038,9 +1038,8 @@ static int handle_at_packet(struct context *context, /* This packet was cancelled, just continue. */ return 1; - payload_bus = le32_to_cpu(last->data_address); - if (payload_bus != 0) - dma_unmap_single(ohci->card.device, payload_bus, + if (packet->payload_bus) + dma_unmap_single(ohci->card.device, packet->payload_bus, packet->payload_length, DMA_TO_DEVICE); evt = le16_to_cpu(last->transfer_status) & 0x1f; @@ -1697,6 +1696,10 @@ static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet) if (packet->ack != 0) goto out; + if (packet->payload_bus) + dma_unmap_single(ohci->card.device, packet->payload_bus, + packet->payload_length, DMA_TO_DEVICE); + log_ar_at_event('T', packet->speed, packet->header, 0x20); driver_data->packet = NULL; packet->ack = RCODE_CANCELLED; diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index 022ac4fabb67..2884f876397b 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -207,6 +207,7 @@ fw_fill_request(struct fw_packet *packet, int tcode, int tlabel, packet->speed = speed; packet->generation = generation; packet->ack = 0; + packet->payload_bus = 0; } /** @@ -581,6 +582,8 @@ fw_fill_response(struct fw_packet *response, u32 *request_header, BUG(); return; } + + response->payload_bus = 0; } EXPORT_SYMBOL(fw_fill_response); diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index aed7dbb17cda..839466f0a795 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -27,6 +27,7 @@ #include #include #include +#include #include #define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4) @@ -153,6 +154,7 @@ struct fw_packet { size_t header_length; void *payload; size_t payload_length; + dma_addr_t payload_bus; u32 timestamp; /* -- cgit v1.2.3 From 6a0fcbb4dad15f02ca8f8ae6324fcd3fc43b9d35 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 10 Dec 2008 23:29:44 +1100 Subject: crypto: api - Disallow cryptomgr as a module if algorithms are built-in If we have at least one algorithm built-in then it no longer makes sense to have the testing framework, and hence cryptomgr to be a module. It should be either on or off, i.e., built-in or disabled. This just happens to stop a potential runaway modprobe loop that seems to trigger on at least one distro. With fixes from Evgeniy Polyakov. Signed-off-by: Herbert Xu --- crypto/Kconfig | 36 ++++++++++++++++++++++++++++++++---- crypto/Makefile | 18 +++++++++--------- 2 files changed, 41 insertions(+), 13 deletions(-) diff --git a/crypto/Kconfig b/crypto/Kconfig index 39dbd8e4dde1..dc20a34ba5ef 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -31,35 +31,63 @@ config CRYPTO_FIPS config CRYPTO_ALGAPI tristate + select CRYPTO_ALGAPI2 help This option provides the API for cryptographic algorithms. +config CRYPTO_ALGAPI2 + tristate + config CRYPTO_AEAD tristate + select CRYPTO_AEAD2 select CRYPTO_ALGAPI +config CRYPTO_AEAD2 + tristate + select CRYPTO_ALGAPI2 + config CRYPTO_BLKCIPHER tristate + select CRYPTO_BLKCIPHER2 select CRYPTO_ALGAPI - select CRYPTO_RNG + +config CRYPTO_BLKCIPHER2 + tristate + select CRYPTO_ALGAPI2 + select CRYPTO_RNG2 config CRYPTO_HASH tristate + select CRYPTO_HASH2 select CRYPTO_ALGAPI +config CRYPTO_HASH2 + tristate + select CRYPTO_ALGAPI2 + config CRYPTO_RNG tristate + select CRYPTO_RNG2 select CRYPTO_ALGAPI +config CRYPTO_RNG2 + tristate + select CRYPTO_ALGAPI2 + config CRYPTO_MANAGER tristate "Cryptographic algorithm manager" - select CRYPTO_AEAD - select CRYPTO_HASH - select CRYPTO_BLKCIPHER + select CRYPTO_MANAGER2 help Create default cryptographic template instantiations such as cbc(aes). +config CRYPTO_MANAGER2 + def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y) + select CRYPTO_AEAD2 + select CRYPTO_HASH2 + select CRYPTO_BLKCIPHER2 + config CRYPTO_GF128MUL tristate "GF(2^128) multiplication functions (EXPERIMENTAL)" depends on EXPERIMENTAL diff --git a/crypto/Makefile b/crypto/Makefile index 5862b807334e..cd4a4ed078ff 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -9,24 +9,24 @@ obj-$(CONFIG_CRYPTO_FIPS) += fips.o crypto_algapi-$(CONFIG_PROC_FS) += proc.o crypto_algapi-objs := algapi.o scatterwalk.o $(crypto_algapi-y) -obj-$(CONFIG_CRYPTO_ALGAPI) += crypto_algapi.o +obj-$(CONFIG_CRYPTO_ALGAPI2) += crypto_algapi.o -obj-$(CONFIG_CRYPTO_AEAD) += aead.o +obj-$(CONFIG_CRYPTO_AEAD2) += aead.o crypto_blkcipher-objs := ablkcipher.o crypto_blkcipher-objs += blkcipher.o -obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto_blkcipher.o -obj-$(CONFIG_CRYPTO_BLKCIPHER) += chainiv.o -obj-$(CONFIG_CRYPTO_BLKCIPHER) += eseqiv.o +obj-$(CONFIG_CRYPTO_BLKCIPHER2) += crypto_blkcipher.o +obj-$(CONFIG_CRYPTO_BLKCIPHER2) += chainiv.o +obj-$(CONFIG_CRYPTO_BLKCIPHER2) += eseqiv.o obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o crypto_hash-objs := hash.o crypto_hash-objs += ahash.o -obj-$(CONFIG_CRYPTO_HASH) += crypto_hash.o +obj-$(CONFIG_CRYPTO_HASH2) += crypto_hash.o cryptomgr-objs := algboss.o testmgr.o -obj-$(CONFIG_CRYPTO_MANAGER) += cryptomgr.o +obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o obj-$(CONFIG_CRYPTO_HMAC) += hmac.o obj-$(CONFIG_CRYPTO_XCBC) += xcbc.o obj-$(CONFIG_CRYPTO_NULL) += crypto_null.o @@ -73,8 +73,8 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += michael_mic.o obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o obj-$(CONFIG_CRYPTO_LZO) += lzo.o -obj-$(CONFIG_CRYPTO_RNG) += rng.o -obj-$(CONFIG_CRYPTO_RNG) += krng.o +obj-$(CONFIG_CRYPTO_RNG2) += rng.o +obj-$(CONFIG_CRYPTO_RNG2) += krng.o obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o -- cgit v1.2.3 From 69fc208be5b7eb18d22d1eca185b201400fd5ffc Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 9 Dec 2008 13:14:06 -0800 Subject: mm/backing-dev.c: remove recently-added WARN_ON() On second thoughts, this is just going to disturb people while telling us things which we already knew. Cc: Peter Korsgaard Cc: Peter Zijlstra Cc: Kay Sievers Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/backing-dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 2a56124dbc28..801c08b046e6 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -176,7 +176,7 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent, int ret = 0; struct device *dev; - if (WARN_ON(bdi->dev)) + if (bdi->dev) /* The driver needs to use separate queues per device */ goto exit; va_start(args, fmt); -- cgit v1.2.3 From 361371201b60ffd686a694c848c1d5ad6061725f Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Tue, 9 Dec 2008 13:14:07 -0800 Subject: uml: boot broken due to buffer overrun mconsole_init() passed 256 bytes as length in os_create_unix_socket, while the sizeof UNIX_PATH_MAX is 108. This patch fixes that problem and avoids a big overrun bug reported on UML bootup. sockaddr_un.sun_path is UNIX_PATH_MAX long which causes the problem. Reported-by: Vikas K Managutte Reported-by: Sarvesh Kumar Lal Das Signed-off-by: Balbir Singh Reviewed-by: Pekka Enberg Reviewed-by: WANG Cong Cc: Jeff Dike Cc: [please check with Jeff] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/mconsole_kern.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 19d579d74d27..8f44ebb0dec8 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include #include #include @@ -785,7 +787,7 @@ static int __init mconsole_init(void) /* long to avoid size mismatch warnings from gcc */ long sock; int err; - char file[256]; + char file[UNIX_PATH_MAX]; if (umid_file_name("mconsole", file, sizeof(file))) return -1; -- cgit v1.2.3 From fbb5b7ae4b442f1923513dc6165a66c7a7f29073 Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Tue, 9 Dec 2008 13:14:10 -0800 Subject: relayfs: fix infinite loop with splice() Running kmemtraced, which uses splice() on relayfs, causes a hard lock on x86-64 SMP. As described by Tom Zanussi: It looks like you hit the same problem as described here: commit 8191ecd1d14c6914c660dfa007154860a7908857 splice: fix infinite loop in generic_file_splice_read() relay uses the same loop but it never got noticed or fixed. Cc: Mathieu Desnoyers Tested-by: Pekka Enberg Signed-off-by: Tom Zanussi Signed-off-by: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/relay.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/kernel/relay.c b/kernel/relay.c index 32b0befdcb6a..09ac2008f77b 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -1317,12 +1317,9 @@ static ssize_t relay_file_splice_read(struct file *in, if (ret < 0) break; else if (!ret) { - if (spliced) - break; - if (flags & SPLICE_F_NONBLOCK) { + if (flags & SPLICE_F_NONBLOCK) ret = -EAGAIN; - break; - } + break; } *ppos += ret; -- cgit v1.2.3 From fe102c71a65a503646bcc94ccb6859da613c2f4f Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Tue, 9 Dec 2008 13:14:11 -0800 Subject: rtc: fix missing id_table in rtc-ds1672 and rtc-max6900 drivers Add missing id_table to the drivers in subject. Patch is against the latest git. It should go in with 2.6.28 if possible, the drivers won't work without the id_table bits. Signed-off-by: Alessandro Zummo Reported-by: Imre Kaloz Tested-by: Imre Kaloz Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1672.c | 6 ++++++ drivers/rtc/rtc-max6900.c | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c index 341d7a5b45a2..4e91419e8911 100644 --- a/drivers/rtc/rtc-ds1672.c +++ b/drivers/rtc/rtc-ds1672.c @@ -209,12 +209,18 @@ static int ds1672_probe(struct i2c_client *client, return err; } +static struct i2c_device_id ds1672_id[] = { + { "ds1672", 0 }, + { } +}; + static struct i2c_driver ds1672_driver = { .driver = { .name = "rtc-ds1672", }, .probe = &ds1672_probe, .remove = &ds1672_remove, + .id_table = ds1672_id, }; static int __init ds1672_init(void) diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c index 80782798763f..a4f6665ab3c5 100644 --- a/drivers/rtc/rtc-max6900.c +++ b/drivers/rtc/rtc-max6900.c @@ -247,12 +247,18 @@ max6900_probe(struct i2c_client *client, const struct i2c_device_id *id) return 0; } +static struct i2c_device_id max6900_id[] = { + { "max6900", 0 }, + { } +}; + static struct i2c_driver max6900_driver = { .driver = { .name = "rtc-max6900", }, .probe = max6900_probe, .remove = max6900_remove, + .id_table = max6900_id, }; static int __init max6900_init(void) -- cgit v1.2.3 From fd3d664fef97cf01f8e28fe0b024ad52f3bbc1bc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 9 Dec 2008 13:14:11 -0800 Subject: percpu_counter: fix CPU unplug race in percpu_counter_destroy() We should first delete the counter from percpu_counters list before freeing memory, or a percpu_counter_hotcpu_callback() could dereference a NULL pointer. Signed-off-by: Eric Dumazet Acked-by: David S. Miller Cc: Peter Zijlstra Cc: Mingming Cao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/percpu_counter.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/percpu_counter.c b/lib/percpu_counter.c index a8663890a88c..71b265c330ce 100644 --- a/lib/percpu_counter.c +++ b/lib/percpu_counter.c @@ -104,13 +104,13 @@ void percpu_counter_destroy(struct percpu_counter *fbc) if (!fbc->counters) return; - free_percpu(fbc->counters); - fbc->counters = NULL; #ifdef CONFIG_HOTPLUG_CPU mutex_lock(&percpu_counters_lock); list_del(&fbc->list); mutex_unlock(&percpu_counters_lock); #endif + free_percpu(fbc->counters); + fbc->counters = NULL; } EXPORT_SYMBOL(percpu_counter_destroy); -- cgit v1.2.3 From 71c5576fbd809f2015f4eddf72e501e298720cf3 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 9 Dec 2008 13:14:13 -0800 Subject: revert "percpu counter: clean up percpu_counter_sum_and_set()" Revert commit 1f7c14c62ce63805f9574664a6c6de3633d4a354 Author: Mingming Cao Date: Thu Oct 9 12:50:59 2008 -0400 percpu counter: clean up percpu_counter_sum_and_set() Before this patch we had the following: percpu_counter_sum(): return the percpu_counter's value percpu_counter_sum_and_set(): return the percpu_counter's value, copying that value into the central value and zeroing the per-cpu counters before returning. After this patch, percpu_counter_sum_and_set() has gone, and percpu_counter_sum() gets the old percpu_counter_sum_and_set() functionality. Problem is, as Eric points out, the old percpu_counter_sum_and_set() functionality was racy and wrong. It zeroes out counters on "other" cpus, without holding any locks which will prevent races agaist updates from those other CPUS. This patch reverts 1f7c14c62ce63805f9574664a6c6de3633d4a354. This means that percpu_counter_sum_and_set() still has the race, but percpu_counter_sum() does not. Note that this is not a simple revert - ext4 has since started using percpu_counter_sum() for its dirty_blocks counter as well. Note that this revert patch changes percpu_counter_sum() semantics. Before the patch, a call to percpu_counter_sum() will bring the counter's central counter mostly up-to-date, so a following percpu_counter_read() will return a close value. After this patch, a call to percpu_counter_sum() will leave the counter's central accumulator unaltered, so a subsequent call to percpu_counter_read() can now return a significantly inaccurate result. If there is any code in the tree which was introduced after e8ced39d5e8911c662d4d69a342b9d053eaaac4e was merged, and which depends upon the new percpu_counter_sum() semantics, that code will break. Reported-by: Eric Dumazet Cc: "David S. Miller" Cc: Peter Zijlstra Cc: Mingming Cao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext4/balloc.c | 4 ++-- include/linux/percpu_counter.h | 12 +++++++++--- lib/percpu_counter.c | 8 +++++--- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index d2003cdc36aa..c17f69bcd7dd 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -609,8 +609,8 @@ int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks) if (free_blocks - (nblocks + root_blocks + dirty_blocks) < EXT4_FREEBLOCKS_WATERMARK) { - free_blocks = percpu_counter_sum(fbc); - dirty_blocks = percpu_counter_sum(dbc); + free_blocks = percpu_counter_sum_and_set(fbc); + dirty_blocks = percpu_counter_sum_and_set(dbc); if (dirty_blocks < 0) { printk(KERN_CRIT "Dirty block accounting " "went wrong %lld\n", diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h index 9007ccdfc112..208388835357 100644 --- a/include/linux/percpu_counter.h +++ b/include/linux/percpu_counter.h @@ -35,7 +35,7 @@ int percpu_counter_init_irq(struct percpu_counter *fbc, s64 amount); void percpu_counter_destroy(struct percpu_counter *fbc); void percpu_counter_set(struct percpu_counter *fbc, s64 amount); void __percpu_counter_add(struct percpu_counter *fbc, s64 amount, s32 batch); -s64 __percpu_counter_sum(struct percpu_counter *fbc); +s64 __percpu_counter_sum(struct percpu_counter *fbc, int set); static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount) { @@ -44,13 +44,19 @@ static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount) static inline s64 percpu_counter_sum_positive(struct percpu_counter *fbc) { - s64 ret = __percpu_counter_sum(fbc); + s64 ret = __percpu_counter_sum(fbc, 0); return ret < 0 ? 0 : ret; } +static inline s64 percpu_counter_sum_and_set(struct percpu_counter *fbc) +{ + return __percpu_counter_sum(fbc, 1); +} + + static inline s64 percpu_counter_sum(struct percpu_counter *fbc) { - return __percpu_counter_sum(fbc); + return __percpu_counter_sum(fbc, 0); } static inline s64 percpu_counter_read(struct percpu_counter *fbc) diff --git a/lib/percpu_counter.c b/lib/percpu_counter.c index 71b265c330ce..dba1530a5b29 100644 --- a/lib/percpu_counter.c +++ b/lib/percpu_counter.c @@ -52,7 +52,7 @@ EXPORT_SYMBOL(__percpu_counter_add); * Add up all the per-cpu counts, return the result. This is a more accurate * but much slower version of percpu_counter_read_positive() */ -s64 __percpu_counter_sum(struct percpu_counter *fbc) +s64 __percpu_counter_sum(struct percpu_counter *fbc, int set) { s64 ret; int cpu; @@ -62,9 +62,11 @@ s64 __percpu_counter_sum(struct percpu_counter *fbc) for_each_online_cpu(cpu) { s32 *pcount = per_cpu_ptr(fbc->counters, cpu); ret += *pcount; - *pcount = 0; + if (set) + *pcount = 0; } - fbc->count = ret; + if (set) + fbc->count = ret; spin_unlock(&fbc->lock); return ret; -- cgit v1.2.3 From 02d211688727ad02bb4555b1aa8ae2de16b21b39 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 9 Dec 2008 13:14:14 -0800 Subject: revert "percpu_counter: new function percpu_counter_sum_and_set" Revert commit e8ced39d5e8911c662d4d69a342b9d053eaaac4e Author: Mingming Cao Date: Fri Jul 11 19:27:31 2008 -0400 percpu_counter: new function percpu_counter_sum_and_set As described in revert "percpu counter: clean up percpu_counter_sum_and_set()" the new percpu_counter_sum_and_set() is racy against updates to the cpu-local accumulators on other CPUs. Revert that change. This means that ext4 will be slow again. But correct. Reported-by: Eric Dumazet Cc: "David S. Miller" Cc: Peter Zijlstra Cc: Mingming Cao Cc: Cc: [2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext4/balloc.c | 4 ++-- include/linux/percpu_counter.h | 12 +++--------- lib/percpu_counter.c | 7 +------ 3 files changed, 6 insertions(+), 17 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index c17f69bcd7dd..db35cfdb3c8b 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -609,8 +609,8 @@ int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks) if (free_blocks - (nblocks + root_blocks + dirty_blocks) < EXT4_FREEBLOCKS_WATERMARK) { - free_blocks = percpu_counter_sum_and_set(fbc); - dirty_blocks = percpu_counter_sum_and_set(dbc); + free_blocks = percpu_counter_sum_positive(fbc); + dirty_blocks = percpu_counter_sum_positive(dbc); if (dirty_blocks < 0) { printk(KERN_CRIT "Dirty block accounting " "went wrong %lld\n", diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h index 208388835357..9007ccdfc112 100644 --- a/include/linux/percpu_counter.h +++ b/include/linux/percpu_counter.h @@ -35,7 +35,7 @@ int percpu_counter_init_irq(struct percpu_counter *fbc, s64 amount); void percpu_counter_destroy(struct percpu_counter *fbc); void percpu_counter_set(struct percpu_counter *fbc, s64 amount); void __percpu_counter_add(struct percpu_counter *fbc, s64 amount, s32 batch); -s64 __percpu_counter_sum(struct percpu_counter *fbc, int set); +s64 __percpu_counter_sum(struct percpu_counter *fbc); static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount) { @@ -44,19 +44,13 @@ static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount) static inline s64 percpu_counter_sum_positive(struct percpu_counter *fbc) { - s64 ret = __percpu_counter_sum(fbc, 0); + s64 ret = __percpu_counter_sum(fbc); return ret < 0 ? 0 : ret; } -static inline s64 percpu_counter_sum_and_set(struct percpu_counter *fbc) -{ - return __percpu_counter_sum(fbc, 1); -} - - static inline s64 percpu_counter_sum(struct percpu_counter *fbc) { - return __percpu_counter_sum(fbc, 0); + return __percpu_counter_sum(fbc); } static inline s64 percpu_counter_read(struct percpu_counter *fbc) diff --git a/lib/percpu_counter.c b/lib/percpu_counter.c index dba1530a5b29..b255b939bc1b 100644 --- a/lib/percpu_counter.c +++ b/lib/percpu_counter.c @@ -52,7 +52,7 @@ EXPORT_SYMBOL(__percpu_counter_add); * Add up all the per-cpu counts, return the result. This is a more accurate * but much slower version of percpu_counter_read_positive() */ -s64 __percpu_counter_sum(struct percpu_counter *fbc, int set) +s64 __percpu_counter_sum(struct percpu_counter *fbc) { s64 ret; int cpu; @@ -62,12 +62,7 @@ s64 __percpu_counter_sum(struct percpu_counter *fbc, int set) for_each_online_cpu(cpu) { s32 *pcount = per_cpu_ptr(fbc->counters, cpu); ret += *pcount; - if (set) - *pcount = 0; } - if (set) - fbc->count = ret; - spin_unlock(&fbc->lock); return ret; } -- cgit v1.2.3 From 6841c8e26357904ef462650273f5d5015f7bb370 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 9 Dec 2008 13:14:16 -0800 Subject: mm: remove UP version of lru_add_drain_all() Currently, lru_add_drain_all() has two version. (1) use schedule_on_each_cpu() (2) don't use schedule_on_each_cpu() Gerald Schaefer reported it doesn't work well on SMP (not NUMA) S390 machine. offline_pages() calls lru_add_drain_all() followed by drain_all_pages(). While drain_all_pages() works on each cpu, lru_add_drain_all() only runs on the current cpu for architectures w/o CONFIG_NUMA. This let us run into the BUG_ON(!PageBuddy(page)) in __offline_isolated_pages() during memory hotplug stress test on s390. The page in question was still on the pcp list, because of a race with lru_add_drain_all() and drain_all_pages() on different cpus. Actually, Almost machine has CONFIG_UNEVICTABLE_LRU=y. Then almost machine use (1) version lru_add_drain_all although the machine is UP. Then this ifdef is not valueable. simple removing is better. Signed-off-by: KOSAKI Motohiro Cc: Christoph Lameter Cc: Lee Schermerhorn Acked-by: Gerald Schaefer Cc: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swap.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/mm/swap.c b/mm/swap.c index 2881987603eb..b135ec90cdeb 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -299,7 +299,6 @@ void lru_add_drain(void) put_cpu(); } -#if defined(CONFIG_NUMA) || defined(CONFIG_UNEVICTABLE_LRU) static void lru_add_drain_per_cpu(struct work_struct *dummy) { lru_add_drain(); @@ -313,18 +312,6 @@ int lru_add_drain_all(void) return schedule_on_each_cpu(lru_add_drain_per_cpu); } -#else - -/* - * Returns 0 for success - */ -int lru_add_drain_all(void) -{ - lru_add_drain(); - return 0; -} -#endif - /* * Batched page_cache_release(). Decrement the reference count on all the * passed pages. If it fell to zero then remove the page from the LRU and -- cgit v1.2.3 From beaa4867eec02e6eb78e9e9ef503d7eff612b068 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 9 Dec 2008 13:14:17 -0800 Subject: fbcon: fix workqueue shutdown Add a call to cancel_work_sync() in fbcon_exit() to cancel any pending work in the fbcon workqueue. The current implementation of fbcon_exit() sets the fbcon workqueue function info->queue.func to NULL, but does not assure that there is no work pending when it does so. On occasion, depending on system timing, there will still be pending work in the queue when fbcon_exit() is called. This results in a null pointer deference when run_workqueue() tries to call the queue's work function. Fixes errors on shutdown similar to these: Console: switching to colour dummy device 80x25 Unable to handle kernel paging request for data at address 0x00000000 Signed-off-by: Geoff Levand Cc: Krzysztof Helt Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 67ff370d80af..0b2adefe9e3d 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -3531,12 +3531,18 @@ static void fbcon_exit(void) softback_buf = 0UL; for (i = 0; i < FB_MAX; i++) { + int pending; + mapped = 0; info = registered_fb[i]; if (info == NULL) continue; + pending = cancel_work_sync(&info->queue); + DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" : + "no")); + for (j = first_fb_vc; j <= last_fb_vc; j++) { if (con2fb_map[j] == i) mapped = 1; -- cgit v1.2.3 From cc61686001b1368724d1c38805c27e5021cd85ed Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 9 Dec 2008 13:14:18 -0800 Subject: rtc twl4030: rename ioctl function when RTC_INTF_DEV=n Fix build error when RTC_INTF_DEV=n: drivers/rtc/rtc-twl4030.c:402: error: 'twl4030_rtc_ioctl' undeclared here (not in a function) make[3]: *** [drivers/rtc/rtc-twl4030.o] Error 1 Signed-off-by: Randy Dunlap Cc: David Brownell Cc: Tony Lindgren Cc: Samuel Ortiz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-twl4030.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c index abe87a4d2665..01d8da9afdc8 100644 --- a/drivers/rtc/rtc-twl4030.c +++ b/drivers/rtc/rtc-twl4030.c @@ -337,7 +337,7 @@ static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd, } #else -#define omap_rtc_ioctl NULL +#define twl4030_rtc_ioctl NULL #endif static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) -- cgit v1.2.3 From 653d22c0f5c41496c0e949ef5d141ab37c0b0580 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 9 Dec 2008 13:14:20 -0800 Subject: page_cgroup should ignore empty nodes Fix a total bootup freeze on ia64. Signed-off-by: KAMEZAWA Hiroyuki Tested-by: Li Zefan Reported-by: Li Zefan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_cgroup.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c index 0b3cbf090a67..ab27ff750519 100644 --- a/mm/page_cgroup.c +++ b/mm/page_cgroup.c @@ -49,6 +49,9 @@ static int __init alloc_node_page_cgroup(int nid) start_pfn = NODE_DATA(nid)->node_start_pfn; nr_pages = NODE_DATA(nid)->node_spanned_pages; + if (!nr_pages) + return 0; + table_size = sizeof(struct page_cgroup) * nr_pages; base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), -- cgit v1.2.3 From 49c50342c728344b79c8f9e8293637fe80ef5ad5 Mon Sep 17 00:00:00 2001 From: Matt Mackall Date: Tue, 9 Dec 2008 13:14:21 -0800 Subject: pagemap: fix 32-bit pagemap regression The large pages fix from bcf8039ed45 broke 32-bit pagemap by pulling the pagemap entry code out into a function with the wrong return type. Pagemap entries are 64 bits on all systems and unsigned long is only 32 bits on 32-bit systems. Signed-off-by: Matt Mackall Reported-by: Doug Graham Cc: Alexey Dobriyan Cc: Dave Hansen Cc: [2.6.26.x, 2.6.27.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/task_mmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index b770c095e45c..3a8bdd7f5756 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -557,9 +557,9 @@ static u64 swap_pte_to_pagemap_entry(pte_t pte) return swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT); } -static unsigned long pte_to_pagemap_entry(pte_t pte) +static u64 pte_to_pagemap_entry(pte_t pte) { - unsigned long pme = 0; + u64 pme = 0; if (is_swap_pte(pte)) pme = PM_PFRAME(swap_pte_to_pagemap_entry(pte)) | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP; -- cgit v1.2.3 From 52b9582dd5983ac888c494bd3e15b5cd40195c53 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 9 Dec 2008 13:14:22 -0800 Subject: drivers/serial/s3c2440.c: fix typo in MODULE_LICENSE Signed-off-by: Balaji Rao Acked-by: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/s3c2440.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c index 317d239ab740..29cbb0afef8e 100644 --- a/drivers/serial/s3c2440.c +++ b/drivers/serial/s3c2440.c @@ -177,5 +177,5 @@ module_exit(s3c2440_serial_exit); MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPLi v2"); +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:s3c2440-uart"); -- cgit v1.2.3 From 80bba1290ab5122c60cdb73332b26d288dc8aedd Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Tue, 9 Dec 2008 13:14:23 -0800 Subject: mm: no get_user/put_user while holding mmap_sem in do_pages_stat? Since commit 2f007e74bb85b9fc4eab28524052161703300f1a, do_pages_stat() gets the page address from user-space and puts the corresponding status back while holding the mmap_sem for read. There is no need to hold mmap_sem there while some page-faults may occur. This patch adds a temporary address and status buffer so as to only hold mmap_sem while working on these kernel buffers. This is implemented by extracting do_pages_stat_array() out of do_pages_stat(). Signed-off-by: Brice Goglin Cc: Christoph Lameter Cc: KAMEZAWA Hiroyuki Cc: Nick Piggin Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 46 insertions(+), 13 deletions(-) diff --git a/mm/migrate.c b/mm/migrate.c index 1e0d6b237f44..d8f07667fc80 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -987,25 +987,18 @@ out: /* * Determine the nodes of an array of pages and store it in an array of status. */ -static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages, - const void __user * __user *pages, - int __user *status) +static void do_pages_stat_array(struct mm_struct *mm, unsigned long nr_pages, + const void __user **pages, int *status) { unsigned long i; - int err; down_read(&mm->mmap_sem); for (i = 0; i < nr_pages; i++) { - const void __user *p; - unsigned long addr; + unsigned long addr = (unsigned long)(*pages); struct vm_area_struct *vma; struct page *page; - - err = -EFAULT; - if (get_user(p, pages+i)) - goto out; - addr = (unsigned long) p; + int err; vma = find_vma(mm, addr); if (!vma) @@ -1024,12 +1017,52 @@ static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages, err = page_to_nid(page); set_status: - put_user(err, status+i); + *status = err; + + pages++; + status++; + } + + up_read(&mm->mmap_sem); +} + +/* + * Determine the nodes of a user array of pages and store it in + * a user array of status. + */ +static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages, + const void __user * __user *pages, + int __user *status) +{ +#define DO_PAGES_STAT_CHUNK_NR 16 + const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR]; + int chunk_status[DO_PAGES_STAT_CHUNK_NR]; + unsigned long i, chunk_nr = DO_PAGES_STAT_CHUNK_NR; + int err; + + for (i = 0; i < nr_pages; i += chunk_nr) { + if (chunk_nr + i > nr_pages) + chunk_nr = nr_pages - i; + + err = copy_from_user(chunk_pages, &pages[i], + chunk_nr * sizeof(*chunk_pages)); + if (err) { + err = -EFAULT; + goto out; + } + + do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status); + + err = copy_to_user(&status[i], chunk_status, + chunk_nr * sizeof(*chunk_status)); + if (err) { + err = -EFAULT; + goto out; + } } err = 0; out: - up_read(&mm->mmap_sem); return err; } -- cgit v1.2.3 From aa6f14796630c8b03c11e782484aec2aee05e671 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 9 Dec 2008 13:14:25 -0800 Subject: atomic: fix a typo in atomic_long_xchg() atomic_long_xchg() is not correctly defined for 32bit arches. Signed-off-by: Eric Dumazet Cc: Mathieu Desnoyers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h index 4ec0a296bdec..7abdaa91ccd3 100644 --- a/include/asm-generic/atomic.h +++ b/include/asm-generic/atomic.h @@ -251,7 +251,7 @@ static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u) #define atomic_long_cmpxchg(l, old, new) \ (atomic_cmpxchg((atomic_t *)(l), (old), (new))) #define atomic_long_xchg(v, new) \ - (atomic_xchg((atomic_t *)(l), (new))) + (atomic_xchg((atomic_t *)(v), (new))) #endif /* BITS_PER_LONG == 64 */ -- cgit v1.2.3 From 6ee5a399d6a92a52646836a6e10faf255c16393e Mon Sep 17 00:00:00 2001 From: Dmitri Monakhov Date: Tue, 9 Dec 2008 13:14:26 -0800 Subject: inotify: fix IN_ONESHOT unmount event watcher On umount two event will be dispatched to watcher: 1: inotify_dev_queue_event(.., IN_UNMOUNT,..) 2: remove_watch(watch, dev) ->inotify_dev_queue_event(.., IN_IGNORED, ..) But if watcher has IN_ONESHOT bit set then the watcher will be released inside first event. Which result in accessing invalid object later. IMHO it is not pure regression. This bug wasn't triggered while initial inotify interface testing phase because of another bug in IN_ONESHOT handling logic :) commit ac74c00e499ed276a965e5b5600667d5dc04a84a Author: Ulisses Furquim Date: Fri Feb 8 04:18:16 2008 -0800 inotify: fix check for one-shot watches before destroying them As the IN_ONESHOT bit is never set when an event is sent we must check it in the watch's mask and not in the event's mask. TESTCASE: mkdir mnt mount -ttmpfs none mnt mkdir mnt/d ./inotify mnt/d& umount mnt ## << lockup or crash here TESTSOURCE: /* gcc -oinotify inotify.c */ #include #include #include int main(int argc, char **argv) { char buf[1024]; struct inotify_event *ie; char *p; int i; ssize_t l; p = argv[1]; i = inotify_init(); inotify_add_watch(i, p, ~0); l = read(i, buf, sizeof(buf)); printf("read %d bytes\n", l); ie = (struct inotify_event *) buf; printf("event mask: %d\n", ie->mask); return 0; } Signed-off-by: Dmitri Monakhov Cc: John McCutchan Cc: Al Viro Cc: Robert Love Cc: Ulisses Furquim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/inotify.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/inotify.c b/fs/inotify.c index 7bbed1b89825..dae3f28f30d4 100644 --- a/fs/inotify.c +++ b/fs/inotify.c @@ -428,11 +428,13 @@ void inotify_unmount_inodes(struct list_head *list) watches = &inode->inotify_watches; list_for_each_entry_safe(watch, next_w, watches, i_list) { struct inotify_handle *ih= watch->ih; + get_inotify_watch(watch); mutex_lock(&ih->mutex); ih->in_ops->handle_event(watch, watch->wd, IN_UNMOUNT, 0, NULL, NULL); inotify_remove_watch_locked(ih, watch); mutex_unlock(&ih->mutex); + put_inotify_watch(watch); } mutex_unlock(&inode->inotify_mutex); iput(inode); -- cgit v1.2.3 From 9c24624727f6d6c460e45762a408ca5f5b9b8ef2 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Tue, 9 Dec 2008 13:14:27 -0800 Subject: KSYM_SYMBOL_LEN fixes Miles Lane tailing /sys files hit a BUG which Pekka Enberg has tracked to my 966c8c12dc9e77f931e2281ba25d2f0244b06949 sprint_symbol(): use less stack exposing a bug in slub's list_locations() - kallsyms_lookup() writes a 0 to namebuf[KSYM_NAME_LEN-1], but that was beyond the end of page provided. The 100 slop which list_locations() allows at end of page looks roughly enough for all the other stuff it might print after the symbol before it checks again: break out KSYM_SYMBOL_LEN earlier than before. Latencytop and ftrace and are using KSYM_NAME_LEN buffers where they need KSYM_SYMBOL_LEN buffers, and vmallocinfo a 2*KSYM_NAME_LEN buffer where it wants a KSYM_SYMBOL_LEN buffer: fix those before anyone copies them. [akpm@linux-foundation.org: ftrace.h needs module.h] Signed-off-by: Hugh Dickins Cc: Christoph Lameter Cc Miles Lane Acked-by: Pekka Enberg Acked-by: Steven Rostedt Acked-by: Frederic Weisbecker Cc: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/base.c | 2 +- include/linux/ftrace.h | 3 ++- kernel/latencytop.c | 2 +- mm/slub.c | 2 +- mm/vmalloc.c | 2 +- 5 files changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index 486cf3fe7139..d4677603c889 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -371,7 +371,7 @@ static int lstats_show_proc(struct seq_file *m, void *v) task->latency_record[i].time, task->latency_record[i].max); for (q = 0; q < LT_BACKTRACEDEPTH; q++) { - char sym[KSYM_NAME_LEN]; + char sym[KSYM_SYMBOL_LEN]; char *c; if (!task->latency_record[i].backtrace[q]) break; diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 703eb53cfa2b..9c5bc6be2b09 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -6,6 +6,7 @@ #include #include #include +#include #include #ifdef CONFIG_FUNCTION_TRACER @@ -231,7 +232,7 @@ ftrace_init_module(unsigned long *start, unsigned long *end) { } struct boot_trace { pid_t caller; - char func[KSYM_NAME_LEN]; + char func[KSYM_SYMBOL_LEN]; int result; unsigned long long duration; /* usecs */ ktime_t calltime; diff --git a/kernel/latencytop.c b/kernel/latencytop.c index 5e7b45c56923..449db466bdbc 100644 --- a/kernel/latencytop.c +++ b/kernel/latencytop.c @@ -191,7 +191,7 @@ static int lstats_show(struct seq_file *m, void *v) latency_record[i].time, latency_record[i].max); for (q = 0; q < LT_BACKTRACEDEPTH; q++) { - char sym[KSYM_NAME_LEN]; + char sym[KSYM_SYMBOL_LEN]; char *c; if (!latency_record[i].backtrace[q]) break; diff --git a/mm/slub.c b/mm/slub.c index 749588a50a5a..a2cd47d89e0a 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -3597,7 +3597,7 @@ static int list_locations(struct kmem_cache *s, char *buf, for (i = 0; i < t.count; i++) { struct location *l = &t.loc[i]; - if (len > PAGE_SIZE - 100) + if (len > PAGE_SIZE - KSYM_SYMBOL_LEN - 100) break; len += sprintf(buf + len, "%7ld ", l->count); diff --git a/mm/vmalloc.c b/mm/vmalloc.c index f3f6e0758562..1ddb77ba3995 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1717,7 +1717,7 @@ static int s_show(struct seq_file *m, void *p) v->addr, v->addr + v->size, v->size); if (v->caller) { - char buff[2 * KSYM_NAME_LEN]; + char buff[KSYM_SYMBOL_LEN]; seq_putc(m, ' '); sprint_symbol(buff, (unsigned long)v->caller); -- cgit v1.2.3 From c1ab6cc68cb7d512ebba3496cd341286d2d7969d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 9 Dec 2008 13:14:31 -0800 Subject: drivers/video/mb862xx/mb862xxfb.c: fix printk sparc64: drivers/video/mb862xx/mb862xxfb.c:929: warning: long long unsigned int format, resource_size_t arg (arg 4) drivers/video/mb862xx/mb862xxfb.c:931: warning: long long unsigned int format, resource_size_t arg (arg 4) We don't know what type the architecture uses to implement u64, hence they cannot be printed. Cc: Anatolij Gustschin Cc: Dmitry Baryshkov Cc: Anton Vorontsov Cc: Matteo Fortini Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/mb862xx/mb862xxfb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c index 38718d95fbb9..fb64234a3825 100644 --- a/drivers/video/mb862xx/mb862xxfb.c +++ b/drivers/video/mb862xx/mb862xxfb.c @@ -927,9 +927,9 @@ static int __devinit mb862xx_pci_probe(struct pci_dev *pdev, } dev_dbg(dev, "fb phys 0x%llx 0x%lx\n", - (u64)par->fb_base_phys, (ulong)par->mapped_vram); + (unsigned long long)par->fb_base_phys, (ulong)par->mapped_vram); dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n", - (u64)par->mmio_base_phys, (ulong)par->mmio_len); + (unsigned long long)par->mmio_base_phys, (ulong)par->mmio_len); if (mb862xx_pci_gdc_init(par)) goto io_unmap; -- cgit v1.2.3 From cba767175becadc5c4016cceb7bfdd2c7fe722f4 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 6 Dec 2008 04:38:11 +0100 Subject: pktcdvd: remove broken dev_t export of class devices The pktcdvd created class devices only export some sysfs files, but have no char dev_t registered in the driver. At class device creation time they copy the dev_t value of the block device to the char device, wich will register a new char device in the driver core and userspace, with a conflicting dev_t value. In many cases the class devices dev_t just points to a random USB device. This fixes the sysfs "duplicate entry" errors. Signed-off-by: Kay Sievers Acked-by: Peter Osterlund Cc: Al Viro Signed-off-by: Linus Torvalds --- drivers/block/pktcdvd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index edda7b6b077b..dc7a8c352da2 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -302,7 +302,7 @@ static struct kobj_type kobj_pkt_type_wqueue = { static void pkt_sysfs_dev_new(struct pktcdvd_device *pd) { if (class_pktcdvd) { - pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, NULL, + pd->dev = device_create(class_pktcdvd, NULL, MKDEV(0, 0), NULL, "%s", pd->name); if (IS_ERR(pd->dev)) pd->dev = NULL; -- cgit v1.2.3 From cb32898c0996e78509a4b21b068209eb2d569f00 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Wed, 10 Dec 2008 12:43:19 +0000 Subject: MN10300: vmlinux.lds.S cleanup - use PAGE_SIZE, PERCPU macros Include the linux/page.h header into the MN10300 kernel linker script thus allowing us to use PAGE_SIZE macro instead of a numeric constant. Also use the PERCPU macro instead of an explicit section definition. Signed-off-by: Cyrill Gorcunov Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/vmlinux.lds.S | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index a3e80f444f55..b8259668f7dc 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -11,6 +11,7 @@ #define __VMLINUX_LDS__ #include #include +#include OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin") OUTPUT_ARCH(mn10300) @@ -55,13 +56,13 @@ SECTIONS CONSTRUCTORS } - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_begin = .; .data_nosave : { *(.data.nosave) } - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_end = .; - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); .data.page_aligned : { *(.data.idt) } . = ALIGN(32); @@ -78,7 +79,7 @@ SECTIONS .data.init_task : { *(.data.init_task) } /* might get freed after init */ - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { __smp_locks = .; *(.smp_locks) @@ -86,7 +87,7 @@ SECTIONS } /* will be freed after init */ - . = ALIGN(4096); /* Init code and data */ + . = ALIGN(PAGE_SIZE); /* Init code and data */ __init_begin = .; .init.text : { _sinittext = .; @@ -120,17 +121,14 @@ SECTIONS .exit.data : { *(.exit.data) } #ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; #endif - . = ALIGN(32); - __per_cpu_start = .; - .data.percpu : { *(.data.percpu) } - __per_cpu_end = .; - . = ALIGN(4096); + PERCPU(32) + . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ @@ -145,7 +143,7 @@ SECTIONS _end = . ; /* This is where the kernel creates the early boot page tables */ - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); pg0 = .; /* Sections to be discarded */ -- cgit v1.2.3 From a8893fb3e61473349b052794ae157b938e3b2b98 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 10 Dec 2008 12:43:24 +0000 Subject: MN10300: Discard low-priority Tx interrupts when closing an on-chip serial port Discard low-prioriy Tx interrupts when closing an MN10300 on-chip serial port. The MN10300 on-chip serial port uses three interrupts to manage its serial ports: (1) A very high priority interrupt that drives virtual DMA for Rx. (2) A very high priority interrupt that drives virtual DMA for Tx. (3) A normal priority virtual interrupt that does the normal UART interrupt stuff and is shared between Rx and Tx. mn10300_serial_stop_tx() only disables the high priority Tx interrupt. It doesn't also disable the normal priority one because it is shared with Rx. However, the high priority interrupt may interrupt local_irq_disabled() sections, and so may have queued up a low priority virtual interrupt whilst the UART driver is asking for the Tx interrupt to be disabled. The result of this can be an oops when we try to process the interrupt in mn10300_serial_transmit_interrupt() as port->uart.info and port->uart.info->tty may have gone away. To deal with this, if either of those pointers is NULL, we make sure the high-priority Tx interrupt is disabled and discard the interrupt. The low priority interrupt is disabled by the mn10300_serial_pic irq_chip table. Signed-off-by: Akira Takeuchi Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/mn10300-serial.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index aa07d0cd1905..59b9c4bf9583 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -566,6 +566,11 @@ static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port) { _enter("%s", port->name); + if (!port->uart.info || !port->uart.info->port.tty) { + mn10300_serial_dis_tx_intr(port); + return; + } + if (uart_tx_stopped(&port->uart) || uart_circ_empty(&port->uart.info->xmit)) mn10300_serial_dis_tx_intr(port); -- cgit v1.2.3 From 24646bd2269fbca95367bfd3eafbc9f7ade2e980 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 10 Dec 2008 12:43:29 +0000 Subject: MN10300: Fix the preemption resume_kernel() routine Fix the preemption resume_kernel() routine by inverting the test to see whether interrupts are off (IM7 is all enabled, not all disabled). Furthermore, interrupts should be disabled on entry to resume_kernel() so that they're correctly set for jumping to restore_all() and doing the need reschedule test. Signed-off-by: Akira Takeuchi Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/entry.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index b7cbb1487af4..62fba8aa9b6e 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -180,6 +180,7 @@ ENTRY(resume_userspace) #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) + __cli mov (TI_preempt_count,a2),d0 # non-zero preempt_count ? cmp 0,d0 bne restore_all @@ -190,7 +191,7 @@ need_resched: mov (REG_EPSW,fp),d0 and EPSW_IM,d0 cmp EPSW_IM_7,d0 # interrupts off (exception path) ? - beq restore_all + bne restore_all call preempt_schedule_irq[],0 jmp need_resched #endif -- cgit v1.2.3 From 54b71fba68efbf3ab89721a384df2ce757750979 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 10 Dec 2008 12:43:34 +0000 Subject: MN10300: Fix __put_user_asm8() Fix __put_user_asm8() by jumping to the end label (3:) from the exception handler, rather than jumping back to retry the second store instruction (label 2:). Signed-off-by: Akira Takeuchi Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/asm-mn10300/uaccess.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-mn10300/uaccess.h b/include/asm-mn10300/uaccess.h index 46b9b647f3c3..8a3a4dd55763 100644 --- a/include/asm-mn10300/uaccess.h +++ b/include/asm-mn10300/uaccess.h @@ -266,7 +266,7 @@ extern int __get_user_unknown(void); " .section .fixup,\"ax\" \n" \ "4: \n" \ " mov %5,%0 \n" \ - " jmp 2b \n" \ + " jmp 3b \n" \ " .previous \n" \ " .section __ex_table,\"a\"\n" \ " .balign 4 \n" \ -- cgit v1.2.3 From c7f8d6f6b5d121e5f7408119661ca29fc4661c10 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 10 Dec 2008 12:43:39 +0000 Subject: MN10300: Give correct size when reserving interrupt vector table Give the correct size when reserving the interrupt vector table. It should be a page not a single byte. Signed-off-by: Akira Takeuchi Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index 017121ce896f..e1d88ab51008 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -161,7 +161,7 @@ void __init setup_arch(char **cmdline_p) reserve the page it is occupying. */ if (CONFIG_INTERRUPT_VECTOR_BASE >= CONFIG_KERNEL_RAM_BASE_ADDRESS && CONFIG_INTERRUPT_VECTOR_BASE < memory_end) - reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, 1, + reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, PAGE_SIZE, BOOTMEM_DEFAULT); reserve_bootmem(PAGE_ALIGN(PFN_PHYS(free_pfn)), bootmap_size, -- cgit v1.2.3 From 711a49a07f84f914aac26a52143f6e7526571143 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Wed, 10 Dec 2008 18:17:06 +0100 Subject: lib/idr.c: Fix bug introduced by RCU fix The last patch to lib/idr.c caused a bug if idr_get_new_above() was called on an empty idr. Usually, nodes stay on the same layer. New layers are added to the top of the tree. The exception is idr_get_new_above() on an empty tree: In this case, the new root node is first added on layer 0, then moved upwards. p->layer was not updated. As usual: You shall never rely on the source code comments, they will only mislead you. Signed-off-by: Manfred Spraul Signed-off-by: Linus Torvalds --- lib/idr.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/lib/idr.c b/lib/idr.c index 7a785a0c2ea0..1c4f9281f412 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -220,8 +220,14 @@ build_up: */ while ((layers < (MAX_LEVEL - 1)) && (id >= (1 << (layers*IDR_BITS)))) { layers++; - if (!p->count) + if (!p->count) { + /* special case: if the tree is currently empty, + * then we grow the tree by moving the top node + * upwards. + */ + p->layer++; continue; + } if (!(new = get_from_free_list(idp))) { /* * The allocation failed. If we built part of -- cgit v1.2.3 From b88ed20594db2c685555b68c52b693b75738b2f5 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 10 Dec 2008 20:48:52 +0000 Subject: fix mapping_writably_mapped() Lee Schermerhorn noticed yesterday that I broke the mapping_writably_mapped test in 2.6.7! Bad bad bug, good good find. The i_mmap_writable count must be incremented for VM_SHARED (just as i_writecount is for VM_DENYWRITE, but while holding the i_mmap_lock) when dup_mmap() copies the vma for fork: it has its own more optimal version of __vma_link_file(), and I missed this out. So the count was later going down to 0 (dangerous) when one end unmapped, then wrapping negative (inefficient) when the other end unmapped. The only impact on x86 would have been that setting a mandatory lock on a file which has at some time been opened O_RDWR and mapped MAP_SHARED (but not necessarily PROT_WRITE) across a fork, might fail with -EAGAIN when it should succeed, or succeed when it should fail. But those architectures which rely on flush_dcache_page() to flush userspace modifications back into the page before the kernel reads it, may in some cases have skipped the flush after such a fork - though any repetitive test will soon wrap the count negative, in which case it will flush_dcache_page() unnecessarily. Fix would be a two-liner, but mapping variable added, and comment moved. Reported-by: Lee Schermerhorn Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds --- kernel/fork.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index 8d6a7dd9282b..495da2e9a8b4 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -315,17 +315,20 @@ static int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm) file = tmp->vm_file; if (file) { struct inode *inode = file->f_path.dentry->d_inode; + struct address_space *mapping = file->f_mapping; + get_file(file); if (tmp->vm_flags & VM_DENYWRITE) atomic_dec(&inode->i_writecount); - - /* insert tmp into the share list, just after mpnt */ - spin_lock(&file->f_mapping->i_mmap_lock); + spin_lock(&mapping->i_mmap_lock); + if (tmp->vm_flags & VM_SHARED) + mapping->i_mmap_writable++; tmp->vm_truncate_count = mpnt->vm_truncate_count; - flush_dcache_mmap_lock(file->f_mapping); + flush_dcache_mmap_lock(mapping); + /* insert tmp into the share list, just after mpnt */ vma_prio_tree_add(tmp, mpnt); - flush_dcache_mmap_unlock(file->f_mapping); - spin_unlock(&file->f_mapping->i_mmap_lock); + flush_dcache_mmap_unlock(mapping); + spin_unlock(&mapping->i_mmap_lock); } /* -- cgit v1.2.3 From 8b1fae4e4200388b64dd88065639413cb3f1051c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 10 Dec 2008 15:11:51 -0800 Subject: Linux 2.6.28-rc8 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9a49960f7aad..6c2f51b70454 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Erotic Pickled Herring # *DOCUMENTATION* -- cgit v1.2.3